Science.gov

Sample records for 4-2-aminoethyl benzenesulfonyl fluoride

  1. GENERAL: Low-temperature heat capacities and standard molar enthalpy of formation of 4-(2-aminoethyl)-phenol (C8H11NO)

    NASA Astrophysics Data System (ADS)

    Di, You-Ying; Kong, Yu-Xia; Yang, Wei-Wei; Tan, Zhi-Cheng

    2008-09-01

    This paper reports that low-temperature heat capacities of 4-(2-aminoethyl)-phenol (C8H11NO) are measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 400 K. A polynomial equation of heat capacities as a function of the temperature was fitted by the least square method. Based on the fitted polynomial, the smoothed heat capacities and thermodynamic functions of the compound relative to the standard reference temperature 298.15 K were calculated and tabulated at the interval of 5 K. The energy equivalent, ɛcalor, of the oxygen-bomb combustion calorimeter has been determined from 0.68 g of NIST 39i benzoic acid to be ɛcalor = (14674.69±17.49)J.K-1. The constant-volume energy of combustion of the compound at T = 298.15 K was measured by a precision oxygen-bomb combustion calorimeter to be ΔcU = -(32374.25±12.93)J.g-1. The standard molar enthalpy of combustion for the compound was calculated to be ΔcHmominus = -(4445.47 ± 1.77) k. J · mol-1 according to the definition of enthalpy of combustion and other thermodynamic principles. Finally, the standard molar enthalpy of formation of the compound was derived to be ΔfHmominus(C8H11NO, s) = -(274.68 ± 2.06) kJ · mol-1, in accordance with Hess law.

  2. Synthesis, UV/vis, FT-IR and Mössbauer spectroscopic characterization and molecular structure of the Bis[4-(2-aminoethyl)morpholine](tetrakis(4-metoxyphenyl)porphyrinato) iron(II) complex

    NASA Astrophysics Data System (ADS)

    Ben Haj Hassen, Leila; Ezzayani, Khaireddine; Rousselin, Yoann; Stern, Christine; Nasri, Habib; Schulz, Charles E.

    2016-04-01

    The synthesis, the UV-visible, FT-IR and Mössbauer spectroscopy and the crystal structure characterizations of the bis[4-(2-Aminoethyl)morpholine]tetrakis(4-metoxyphenyl)porphy-rinato)iron(II) complex are described. The title compound crystallizes in the triclinic, space group P-1, with a = 11.1253(4) Å, b = 11.2379(4) Å, c = 11.5488(4) Å, α = 72.304(2)°, β = 86.002(2)°, γ = 72.066(2)°, V = 1308.28(8) Å3, Z = 1. The Môssbauer data are consistent with an iron(II) low-spin (S = 0) porphyin species. The spin-state is confirmed by the value of the average equatorial iron-nitrogen pyrrole distance (Fe__Np = 1.988(2) Å) which is in the normal range of low-spin iron(II) porphyrins. The supramolecular architecture involve hydrogen bonding including C__H … O and weak C__H … Cg π intermolecular interactions involving centroides (Cg) pyrrole and phenyl rings.

  3. Fluoride

    MedlinePlus

    Fluoride is used to prevent tooth decay. It is taken up by teeth and helps to strengthen ... and block the cavity-forming action of bacteria. Fluoride usually is prescribed for children and adults whose ...

  4. Fluoride

    MedlinePlus

    Fluoride is used to prevent tooth decay. It is taken up by teeth and helps to strengthen teeth, resist acid, and block the cavity-forming action of bacteria. Fluoride usually is prescribed for children ...

  5. Novel N-Benzenesulfonyl Sophocarpinol Derivatives as Coxsackie B Virus Inhibitors

    PubMed Central

    2015-01-01

    Novel N-benzenesulfonyl sophocarpinic acid/ester and sophocarpinol derivatives were synthesized and evaluated for their antienteroviral activities against coxsackievirus type B3 (CVB3) from sophocarpine (1), a natural medicine isolated from Chinese herb. Structure–activity relationship (SAR) analysis revealed that the double bond and its geometrical configuration and position at the C-11 attachment did not greatly affect the potency. Among these derivatives, sophocarpinol 24d exerted the promising activities against not only CVB3 but also CVB1, CVB2, CVB5, and CVB6 with IC50 ranging from 0.62 to 3.63 μM (SI from 46 to 275), indicating a broad-spectrum antienteroviral characteristic. The SAR results provided the powerful information for further strategic optimization and development of a novel scaffold of broad-spectrum antiviral candidates against enteroviruses. PMID:25699158

  6. Fluoridation Basics

    MedlinePlus

    ... Water Fluoridation Journal Articles for Community Water Fluoridation Water Fluoridation Basics Recommend on Facebook Tweet Share Compartir ... because of tooth decay. History of Fluoride in Water In the 1930s, scientists examined the relationship between ...

  7. Optimal Fluoridation

    PubMed Central

    Lee, John R.

    1975-01-01

    Optimal fluoridation has been defined as that fluoride exposure which confers maximal cariostasis with minimal toxicity and its values have been previously determined to be 0.5 to 1 mg per day for infants and 1 to 1.5 mg per day for an average child. Total fluoride ingestion and urine excretion were studied in Marin County, California, children in 1973 before municipal water fluoridation. Results showed fluoride exposure to be higher than anticipated and fulfilled previously accepted criteria for optimal fluoridation. Present and future water fluoridation plans need to be reevaluated in light of total environmental fluoride exposure. PMID:1130041

  8. Systemic fluoride.

    PubMed

    Sampaio, Fábio Correia; Levy, Steven Marc

    2011-01-01

    There is substantial evidence that fluoride, through different applications and formulas, works to control caries development. The first observations of fluoride's effects on dental caries were linked to fluoride naturally present in the drinking water, and then from controlled water fluoridation programs. Other systemic methods to deliver fluoride were later suggested, including dietary fluoride supplements such as salt and milk. These systemic methods are now being questioned due to the fact that many studies have indicated that fluoride's action relies mainly on its post-eruptive effect from topical contact with the tooth structure. It is known that even the methods of delivering fluoride known as 'systemic' act mainly through a topical effect when they are in contact with the teeth. The effectiveness of water fluoridation in many geographic areas is lower than in previous eras due to the widespread use of other fluoride modalities. Nevertheless, this evidence should not be interpreted as an indication that systemic methods are no longer relevant ways to deliver fluoride on an individual basis or for collective health programs. Caution must be taken to avoid excess ingestion of fluoride when prescribing dietary fluoride supplements for children in order to minimize the risk of dental fluorosis, particularly if there are other relevant sources of fluoride intake - such as drinking water, salt or milk and/or dentifrice. Safe and effective doses of fluoride can be achieved when combining topical and systemic methods. PMID:21701196

  9. Dentifrice Fluoride

    NASA Astrophysics Data System (ADS)

    Rakita, Philip E.

    2004-05-01

    The effectiveness of the fluoride ion in lowering the incidence of dental caries is a major factor in the field of dental health. Observations and research studies in the first half of the 20th century have lead to the widespread adoption of fluoridated water and the use of inorganic fluoride compounds in oral care products, such as toothpaste and dental rinses. This article provides a brief review of the types of compounds used and the chemistry involved.

  10. Bottled Water and Fluoride

    MedlinePlus

    ... Fluoridation Journal Articles for Community Water Fluoridation Bottled Water Recommend on Facebook Tweet Share Compartir Consumers drink ... questions about bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, ...

  11. Divalent fluoride doped cerium fluoride scintillator

    DOEpatents

    Anderson, David F.; Sparrow, Robert W.

    1991-01-01

    The use of divalent fluoride dopants in scintillator materials comprising cerium fluoride is disclosed. The preferred divalent fluoride dopants are calcium fluoride, strontium fluoride, and barium fluoride. The preferred amount of divalent fluoride dopant is less than about two percent by weight of the total scintillator. Cerium fluoride scintillator crystals grown with the addition of a divalent fluoride have exhibited better transmissions and higher light outputs than crystals grown without the addition of such dopants. These scintillators are useful in radiation detection and monitoring applications, and are particularly well suited for high-rate applications such as positron emission tomography (PET).

  12. Fluoride in diet

    MedlinePlus

    ... Infants can only get fluoride through drinking infant formulas. Breast milk has a negligible amount of fluoride ... of water to use in concentrated or powdered formulas. DO NOT use any fluoride supplement without talking ...

  13. Inactivation studies of acetylcholinesterase with phenylmethylsulfonyl fluoride.

    PubMed

    Kraut, D; Goff, H; Pai, R K; Hosea, N A; Silman, I; Sussman, J L; Taylor, P; Voet, J G

    2000-06-01

    Acetylcholinesterase (AChE), a serine hydrolase, is potentially susceptible to inactivation by phenylmethylsulfonyl fluoride (PMSF) and benzenesulfonyl fluoride (BSF). Although BSF inhibits both mouse and Torpedo californica AChE, PMSF does not react measurably with the T. californica enzyme. To understand the residue changes responsible for the change in reactivity, we studied the inactivation of wild-type T. californica and mouse AChE and mutants of both by BSF and PMSF both in the presence and absence of substrate. The enzymes investigated were wild-type mouse AChE, wild-type T. californica AChE, wild-type mouse butyrylcholinesterase, mouse Y330F, Y330A, F288L, and F290I, and the double mutant T. californica F288L/F290V (all mutants given T. californica numbering). Inactivation rate constants for T. californica AChE confirmed previous reports that this enzyme is not inactivated by PMSF. Wild-type mouse AChE and mouse mutants Y330F and Y330A all had similar inactivation rate constants with PMSF, implying that the difference between mouse and T. californica AChE at position 330 is not responsible for their differing PMSF sensitivities. In addition, butyrylcholinesterase and mouse AChE mutants F288L and F290I had increased rate constants ( approximately 14 fold) over those of wild-type mouse AChE, indicating that these residues may be responsible for the increased sensitivity to inactivation by PMSF of butyrylcholinesterase. The double mutant T. californica AChE F288L/F290V had a rate constant nearly identical with the rate constant for the F288L and F290I mouse mutant AChEs, representing an increase of approximately 4000-fold over the T. californica wild-type enzyme. It remains unclear why these two positions have more importance for T. californica AChE than for mouse AChE. PMID:10825396

  14. How Does Fluoride Work?

    MedlinePlus

    ... Help White House Lunch Recipes How Does Fluoride Work? KidsHealth > For Kids > How Does Fluoride Work? Print A A A Text Size There's fluoride ... even in your water. But how does it work to keep teeth healthy? Let's find out. Fluoride ...

  15. Fluoride and Water (For Parents)

    MedlinePlus

    ... Things to Know About Zika & Pregnancy Fluoride and Water KidsHealth > For Parents > Fluoride and Water Print A ... to 19-year-olds continue Fluoride and the Water Supply For more than 60 years, water fluoridation ...

  16. Fluoridation update 2014.

    PubMed

    Allukian, Myron; Wong, Chloe

    2014-01-01

    This year more than 4 million people living in 140 communities in Massachusetts will have the health and economic benefits of community water fluoridation. However Massachusetts is ranked only 37th in the country for fluoridation, with just 62 percent of the population on a public water supply living in fluoridated communities. Nationally, more than 210 million Americans, about 74.6 percent of the U.S. population on a community water supply live in fluoridated communities. PMID:25226771

  17. Fluoride and Oral Health.

    PubMed

    O'Mullane, D M; Baez, R J; Jones, S; Lennon, M A; Petersen, P E; Rugg-Gunn, A J; Whelton, H; Whitford, G M

    2016-06-01

    The discovery during the first half of the 20th century of the link between natural fluoride, adjusted fluoride levels in drinking water and reduced dental caries prevalence proved to be a stimulus for worldwide on-going research into the role of fluoride in improving oral health. Epidemiological studies of fluoridation programmes have confirmed their safety and their effectiveness in controlling dental caries. Major advances in our knowledge of how fluoride impacts the caries process have led to the development, assessment of effectiveness and promotion of other fluoride vehicles including salt, milk, tablets, toothpaste, gels and varnishes. In 1993, the World Health Organization convened an Expert Committee to provide authoritative information on the role of fluorides in the promotion of oral health throughout the world (WHO TRS 846, 1994). This present publication is a revision of the original 1994 document, again using the expertise of researchers from the extensive fields of knowledge required to successfully implement complex interventions such as the use of fluorides to improve dental and oral health. Financial support for research into the development of these new fluoride strategies has come from many sources including government health departments as well as international and national grant agencies. In addition, the unique role which industry has played in the development, formulation, assessment of effectiveness and promotion of the various fluoride vehicles and strategies is noteworthy. This updated version of 'Fluoride and Oral Health' has adopted an evidence-based approach to its commentary on the different fluoride vehicles and strategies and also to its recommendations. In this regard, full account is taken of the many recent systematic reviews published in peer reviewed literature. PMID:27352462

  18. Fluoride in UK rivers.

    PubMed

    Neal, Colin; Neal, Margaret; Davies, Helen; Smith, Jennifer

    2003-10-01

    Fluoride concentrations in eastern UK rivers (the Humber, Tweed, Wear, Great Ouse and Thames) are described based on information collected within the Land-Ocean Interaction Study (LOIS) and by the Environment Agency (EA) of England and Wales. The results show varied fluoride concentrations across the region, with a range from <0.01 to >10 mg l(-1); and mean, median and range in mean concentrations of 0.30, 0.21 and 0.05-3.38 mg l(-1) (excluding one outlier point), respectively. Within the main rivers and tributaries, the mean fluoride concentration varied from approximately 0.5 to over 2 mg l(-1) and the highest values occurred within the Don basin (Don, Dearne and Rother) and parts of the Trent basin (upper Tame and mid-upper Derbyshire Derwent) in highly industrialised and urbanised areas (Sheffield and Rotherham in the Don basin; Birmingham and Derby on the Trent). For localised inputs to the rivers, fluoride concentrations were slightly higher, and considerably higher in one outlier case. Correspondingly, the other rivers examined typically had mean fluoride concentrations between approximately 0.2 and 0.5 mg l(-1), but fluoride concentrations were lower in the headwater areas. As there is much less information on fluoride levels in upland areas, extensive data collected as part of an acid waters survey are used to show that fluoride concentrations are generally less than 0.1 mg l(-1) for the upland UK. The data are summarised in terms of both fluoride concentrations and flux, and the values are cross-referenced to other determinands collected within LOIS. The high positive correlation with boron and negative correlation with flow show the importance of point source (sewage) inputs of fluoride, while strong positive correlations between fluoride and barium indicate the relative importance of vein mineralisation in the bedrock in supplying fluoride to the waters of the Yorkshire Ouse and its tributaries. There seems to be some process that limits the fluoride

  19. Fluorides and non-fluoride remineralization systems.

    PubMed

    Amaechi, Bennett T; van Loveren, Cor

    2013-01-01

    Caries develops when the equilibrium between de- and remineralization is unbalanced favoring demineralization. De- and remineralization occur depending on the degree of saturation of the interstitial fluids with respect to the tooth mineral. This equilibrium is positively influenced when fluoride, calcium and phosphate ions are added favoring remineralization. In addition, when fluoride is present, it will be incorporated into the newly formed mineral which is then less soluble. Toothpastes may contain fluoride and calcium ions separately or together in various compounds (remineralization systems) and may therefore reduce demineralization and promote remineralization. Formulating all these compounds in one paste may be challenging due to possible premature calcium-fluoride interactions and the low solubility of CaF2. There is a large amount of clinical evidence supporting the potent caries preventive effect of fluoride toothpastes indisputably. The amount of clinical evidence of the effectiveness of the other remineralization systems is far less convincing. Evidence is lacking for head to head comparisons of the various remineralization systems. PMID:23817057

  20. PRODUCTION OF THORIUM FLUORIDE

    DOEpatents

    Zachariasen, W.H.

    1959-08-11

    A process is presented for producing anhydrous thorium fluoride comprising the step of contacting a saturated aqueous solution of thorium nitrate with an aqueous solution of hydrofluoric acid having a concentration of about 45 to 50% by weight at a temperature above 70 deg C whereby anhydrous thorium fluoride precipitates.

  1. Massachusetts fluoridation update 2006.

    PubMed

    Allukian, Myron

    2006-01-01

    Massachusetts has a long history of activity with community water fluoridation. Although the state has 3.8 million people living in 137 fluoridated communities, there are more than 2 million people who do not have these benefits. The Bay State is ranked 35th in the country regarding the percent of people on public water supplies with fluoridation. We can do better than that. We have more than 60 years of experience receiving the health and economic benefits of fluoridation in our country; however, there is still a lot of misinformation about fluoridation, and the unreliable nature of information posted on the Internet exacerbates much of this misinformation. Dental professionals, their patients, and decision-makers must be continuously educated about the safety, health, and economic benefits of community water fluoridation. Patients from 6 months to 16 years of age living in nonfluoridated communities should be prescribed supplemental fluoride. Dental professionals in nonfluoridated communities should assist them to become fluoridated. All dental professionals need to become more involved in the leadership of their communities. PMID:16683510

  2. Indium fluoride glass fibers

    NASA Astrophysics Data System (ADS)

    Saad, Mohammed

    2012-03-01

    Fluoride glasses are the only material that transmit light from ultraviolet to mid-infrared and can be drawn into industrial optical fibers. The mechanical and optical properties of new indium fluoride glass fibers have been investigated. Multimode fiber 190 microns, has very high mechanical strength greater than 100 kpsi and optical loss as low as 45 dB/km between 2 and 4 microns. Unlike chalcogenide glass fibers, indium fluoride fiber has a wide transmission window from 0.3 to 5.5 microns without any absorption peak. Indium fluoride glass fibers are the technology of choice for all application requiring transmission up to 5 micron such as infrared contour measure (IRCM) and chemical sensing. Furthermore, Indium fluoride glasses have low phonon energy and can be heavily doped and co-doped whit rare-earth elements. Therefore they are very promising candidates for infrared fiber lasers.

  3. Fluoridation: strategies for success.

    PubMed

    Isman, R

    1981-07-01

    Of 19 referenda on community water fluoridation held in the first six months of 1980, 17 were defeated. Among the postulated reasons are a growing distrust of government and the health establishment. The public remains largely ignorant of the purpose and benefits of fluoridation. The emotionalism surrounding the issue has made it difficult to generate public support outside of the health professions. Opponents have also learned to fight fluoridation with increasingly sophisticated techniques. Some of the strategies used in recent successful campaigns in Oakland, California, and Portland, Oregon are described; recommendations that can be applied to communities considering fluoridation include careful wording of ballot measures so they are unequivocally clear and simple; timing ballot measures with elections likely to draw the largest voter turnout; broadening the base of political and financial support; using a figurehead if possible; and making maximum use of the media. PMID:7246838

  4. Fluoride in diet

    MedlinePlus

    ... broken through the gums have changes in the enamel that covers the teeth. Faint white lines or ... regarding fluoride intake from reconstituted infant formula and enamel fluorosis: a report of the American Dental Association ...

  5. Fluoride toothpastes, rinses, and tablets.

    PubMed

    Stephen, K W

    1994-07-01

    Only from the mid-1950's has therapeutic benefit been obtained via dentifrices, initially with stannous fluoride-then monofluorophosphate-containing products which remained stable and efficacious. Altered abrasive systems followed, and both sodium fluoride and monofluorophosphate/sodium fluoride mixtures were introduced as active anti-caries agents, with recent meta-analysis indicating that sodium fluoride > monofluorophosphate/sodium fluoride > monofluorophosphate. With respect to fluoride levels, clear dose-response relationships have been demonstrated. However, at < 1000 ppm F, the situation is less certain. Since the mid-1980's, anticalculus fluoride dentifrices have been marketed, and have been shown to have similar caries-reducing potential as their non-calculus-inhibiting control formulae. Finally, one study has been described where a sodium fluoride dentifrice successfully reduced root caries. Of the many fluoride formulations used for caries-inhibiting mouthrinsing [e.g., acid phosphate fluoride (100-3000 ppm F), sodium fluoride (45-3000 ppm F), stannous fluoride (100-250 ppm F), ammonium fluoride (1000 ppm F), and amine fluoride (250 ppm F)], sodium fluoride would seem to be the preferred agent. Furthermore, rinse frequency is deemed more important than fluoride ion concentration, but caution is urged re the volumes and concentrations to be used by children, no rinsing being recommended below 4 years. Combination of a 440-pp-F sodium fluoride and 0.05% chlorhexidine school-administered rinse appears to have increased the caries-inhibiting benefit as compared with sodium fluoride alone. Fluoride supplements have reduced deciduous caries from 14 to 93%, and in the permanent dentition, from 20 to 81%.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7865074

  6. Process for converting magnesium fluoride to calcium fluoride

    DOEpatents

    Kreuzmann, A.B.; Palmer, D.A.

    1984-12-21

    This invention is a process for the conversion of magnesium fluoride to calcium fluoride whereby magnesium fluoride is decomposed by heating in the presence of calcium carbonate, calcium oxide or calcium hydroxide. Magnesium fluoride is a by-product of the reduction of uranium tetrafluoride to form uranium metal and has no known commercial use, thus its production creates a significant storage problem. The advantage of this invention is that the quality of calcium fluoride produced is sufficient to be used in the industrial manufacture of anhydrous hydrogen fluoride, steel mill flux or ceramic applications.

  7. Fluoride release from fissure sealants.

    PubMed

    Garcia-Godoy, F; Abarzua, I; De Goes, M F; Chan, D C

    1997-01-01

    This 30-day study, compared the amounts and patterns of fluoride release from 5 commercially available fluoride-containing pit and fissure sealants: FluroShield, Helioseal-F, Ultraseal XT, Baritone L3, and Teethmate-F; Delton without fluoride, was used as control. Disc-shaped samples of each sealant were immersed in distilled water and the fluoride release was measured periodically until day 30. All the fluoridated sealants tested released measurable fluoride throughout the test period in a similar pattern: the greatest amount of fluoride was released in the first 24 hours after mixing, fell sharply on the second day and decreased slowly for the last days. On day one, Baritone L3 released significantly more fluoride than all other materials. Teethmate-F released the highest amount of fluoride during all the other time intervals from day 2, until day 30. PMID:9643204

  8. Protease inhibitor reduces airway response and underlying inflammation in cockroach allergen-induced murine model.

    PubMed

    Saw, Sanjay; Arora, Naveen

    2015-04-01

    Protease(s) enhances airway inflammation and allergic cascade. In the present study, effect of a serine protease inhibitor was evaluated in mouse model of airway disease. Mice were sensitized with cockroach extract (CE) or Per a 10 and treated with 4-(2-aminoethyl) benzenesulfonyl fluoride hydrochloride (AEBSF) 1 h before or after challenge to measure airway response. Mice were euthanized to collect bronchoalveolar lavage fluid (BALF), blood, and lung to evaluate inflammation. AEBSF treatment significantly reduced the AHR in allergen-challenged mice in dose-dependent manner (p≤ 0.01). IgE (p≤0.05) and Th2 cytokines (p≤0.05) were significantly reduced in treated mice. AEBSF treatment lowered total cell (p≤0.05), eosinophil (p≤0.05), and neutrophil (p≤0.05) in BALF and lung tissue. Oxidative stress parameters were impaired on treatment in allergen-challenged mice (p≤0.05). AEBSF had therapeutic effect in allergen-induced airway resistance and underling inflammation and had potential for combination or as add-on therapy for respiratory diseases. PMID:25052477

  9. Organophosphorus pesticides markedly inhibit the activities of natural killer, cytotoxic T lymphocyte and lymphokine-activated killer: a proposed inhibiting mechanism via granzyme inhibition.

    PubMed

    Li, Qing; Nagahara, Noriyuki; Takahashi, Hidemi; Takeda, Kazuyoshi; Okumura, Ko; Minami, Masayasu

    2002-04-01

    We have previously found that diisopropyl methylphosphonate, an organophosphorus by-product generated during sarin synthesis in the Tokyo sarin disaster, significantly inhibited natural killer (NK) and cytotoxic T lymphocyte (CTL) activities. In the present study, to investigate whether organophosphorus pesticides (OPs) also affect NK and CTL activities, we firstly examined the effect of five OPs on human NK activity, and then the effect of Dimethyl 2,2-dichlorovinyl phosphate (DDVP), an OP on murine splenic NK, CTL and lymphokine-activated killer (LAK), and human LAK activities in vitro. To explore the underlying mechanism of decreased NK activity, we also investigated the effect of 4-(2-aminoethyl) benzenesulfonyl fluoride-HCl (p-ABSF), an inhibitor of serine proteases on NK, LAK and CTL activities, and the effect of DDVP on the activity of granzymes (serine proteases). We found that OPs significantly decreased human NK activity in a dose-dependent manner, but the degree of decrease in NK activity differed among the OPs investigated, and that DDVP significantly decreased NK, LAK and CTL activities in a dose-dependent manner, but the degree of decrease in these activities differed. p-ABSF showed a similar inhibitory pattern to DDVP, and had an additive inhibitory effect with DDVP on NK, LAK and CTL activities. We also found that DDVP significantly inhibited granzyme activity in a dose-dependent manner. These findings indicate that OPs significantly decrease NK, LAK and CTL activities in vitro via granzyme inhibition. PMID:11893417

  10. Delay of Iris flower senescence by protease inhibitors.

    PubMed

    Pak, Caroline; van Doorn, Wouter G

    2005-02-01

    Visible senescence of the flag tepals in Iris x hollandica (cv. Blue Magic) was preceded by a large increase in endoprotease activity. Just before visible senescence about half of total endoprotease activity was apparently due to cysteine proteases, somewhat less than half to serine proteases, with a minor role of metalloproteases. Treatment of isolated tepals with the purported serine protease inhibitors AEBSF [4-(2-aminoethyl)-benzenesulfonyl fluoride] or DFP (diisopropyl-fluorophosphate) prevented the increase in endoprotease activity and considerably delayed or prevented the normal senescence symptoms. The specific cysteine protease-specific E-64d reduced maximum endoprotease activity by 30%, but had no effect on the time to visible senescence. Zinc chloride and aprotinin reduced maximum endoprotease activity by c. 50 and 40%, respectively, and slightly delayed visible senescence. A proteasome inhibitor (Z-leu-leu-Nva-H) slightly delayed tepal senescence, which indicates that protein degradation in the proteasome may play a role in induction of the visible senescence symptoms. It is concluded that visible senescence is preceded by large-scale protein degradation, which is apparently mainly due to cysteine- and serine protease activity, and that two (unspecific) inhibitors of serine proteases considerably delay the senescence symptoms. PMID:15720658

  11. Protease-activated receptor-1 negatively regulates proliferation of neural stem/progenitor cells derived from the hippocampal dentate gyrus of the adult mouse.

    PubMed

    Tanaka, Masayuki; Yoneyama, Masanori; Shiba, Tatsuo; Yamaguchi, Taro; Ogita, Kiyokazu

    2016-07-01

    Thrombin-activated protease-activated receptor (PAR)-1 regulates the proliferation of neural cells following brain injury. To elucidate the involvement of PAR-1 in the neurogenesis that occurs in the adult hippocampus, we examined whether PAR-1 regulated the proliferation of neural stem/progenitor cells (NPCs) derived from the murine hippocampal dentate gyrus. NPC cultures expressed PAR-1 protein and mRNA encoding all subtypes of PAR. Direct exposure of the cells to thrombin dramatically attenuated the cell proliferation without causing cell damage. This thrombin-induced attenuation was almost completely abolished by the PAR antagonist RWJ 56110, as well as by dabigatran and 4-(2-aminoethyl)benzenesulfonyl fluoride (AEBSF), which are selective and non-selective thrombin inhibitors, respectively. Expectedly, the PAR-1 agonist peptide (AP) SFLLR-NH2 also attenuated the cell proliferation. The cell proliferation was not affected by the PAR-1 negative control peptide RLLFT-NH2, which is an inactive peptide for PAR-1. Independently, we determined the effect of in vivo treatment with AEBSF or AP on hippocampal neurogenesis in the adult mouse. The administration of AEBSF, but not that of AP, significantly increased the number of newly-generated cells in the hippocampal subgranular zone. These data suggest that PAR-1 negatively regulated adult neurogenesis in the hippocampus by inhibiting the proliferative activity of the NPCs. PMID:27426918

  12. Private Well Water and Fluoride

    MedlinePlus

    ... from my well has less than the recommended level of fluoride for preventing tooth decay? The recommended ... if the water from my well has fluoride levels that are higher than the recommended level for ...

  13. MOLTEN FLUORIDE NUCLEAR REACTOR FUEL

    DOEpatents

    Barton, C.J.; Grimes, W.R.

    1960-01-01

    Molten-salt reactor fuel compositions consisting of mixtures of fluoride salts are reported. In its broadest form, the composition contains an alkali fluoride such as sodium fluoride, zirconium tetrafluoride, and a uranium fluoride, the latter being the tetrafluoride or trifluoride or a mixture of the two. An outstanding property of these fuel compositions is a high coeffieient of thermal expansion which provides a negative temperature coefficient of reactivity in reactors in which they are used.

  14. Ferrimyoglobin-Fluoride.

    ERIC Educational Resources Information Center

    Russo, Steven O.; Hanania, George I. H.

    1990-01-01

    Described is an experiment which is designed to investigate the reaction of the protein ferrimyoglobin with fluoride. The activity uses readily available apparatus and the technique of optical absorbance for measurement of concentrations. Experimental design, procedures, and treatment of the equilibrium data are detailed. (CW)

  15. Other Fluoride Products

    MedlinePlus

    ... in preventing tooth decay in people of all ages. Use the information listed below to compare the other fluoride products ... even among children younger than 6 years of age. Proper application technique ... cleared for marketing by the Food and Drug Administration (FDA) as ...

  16. Fluorine (soluble fluoride)

    Integrated Risk Information System (IRIS)

    Fluorine ( soluble fluoride ) ; CASRN 7782 - 41 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for No

  17. Health Effects Associated with Water Fluoridation.

    ERIC Educational Resources Information Center

    Richmond, Virginia L.

    1979-01-01

    Discussion is presented concerning fluoridation of water supplies. Correlation between fluoride in drinking water and improved dental health is reviewed. Relationship is expressed between fluoridation and reduced tooth decay. Use of fluoride in treating skeletal disorders is discussed. Author advocates fluoridating water supplies. (SA)

  18. Magnesium fluoride recovery method

    DOEpatents

    Gay, Richard L.; McKenzie, Donald E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is contacted with an acid under certain prescribed conditions to produce a liquid product and a particulate solid product. The particulate solid product is separated from the liquid and treated at least two more times with acid to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 pCi/gm. In accordance with a particularly preferred embodiment of the invention a catalyst and an oxidizing agent are used during the acid treatment and preferably the acid is sulfuric acid having a strength of about 1.0 Normal.

  19. Fluoride Content in Alcoholic Drinks.

    PubMed

    Goschorska, Marta; Gutowska, Izabela; Baranowska-Bosiacka, Irena; Rać, Monika Ewa; Chlubek, Dariusz

    2016-06-01

    The aim of the study was to determine the role of alcoholic drinks as a potential source of dietary fluoride by means of measuring fluoride levels in selected alcoholic drinks available on the Polish market that are also diverse in terms of the percentage content of ethanol. The study was conducted on 48 types of drinks with low, medium, and high alcohol content available on the Polish market and offered by various manufacturers, both Polish and foreign. Fluoride concentrations in individual samples were measured by potentiometric method with a fluoride ion-selective electrode. The highest fluoride levels were determined in the lowest percentage drinks (less than 10 % v/v ethanol), with the lowest fluoride levels observed in the highest percentage drinks (above 40 % v/v ethanol). In terms of types of alcoholic drinks, the highest fluoride levels were determined in beers and wines, while the lowest levels were observed in vodkas. These data confirm the fact that alcoholic beverages need to be considered as a significant source of fluoride delivered into the body. PMID:26475300

  20. WET FLUORIDE SEPARATION METHOD

    DOEpatents

    Seaborg, G.T.; Gofman, J.W.; Stoughton, R.W.

    1958-11-25

    The separation of U/sup 233/ from thorium, protactinium, and fission products present in neutron-irradiated thorium is accomplished by dissolving the irradiated materials in aqueous nitric acid, adding either a soluble fluoride, iodate, phosphate, or oxalate to precipltate the thorium, separating the precipltate from the solution, and then precipitating uranlum and protactinium by alkalizing the solution. The uranium and protactinium precipitate is removcd from the solution and dissolved in nitric acid. The uranyl nitrate may then be extracted from the acid solution by means of ether, and the protactinium recovered from the aqueous phase.

  1. Topical fluoride for caries prevention

    PubMed Central

    Weyant, Robert J.; Tracy, Sharon L.; Anselmo, Theresa (Tracy); Beltrán-Aguilar, Eugenio D.; Donly, Kevin J.; Frese, William A.; Hujoel, Philippe P.; Iafolla, Timothy; Kohn, William; Kumar, Jayanth; Levy, Steven M.; Tinanoff, Norman; Wright, J. Timothy; Zero, Domenick; Aravamudhan, Krishna; Frantsve-Hawley, Julie; Meyer, Daniel M.

    2015-01-01

    Background A panel of experts convened by the American Dental Association (ADA) Council on Scientific Affairs presents evidence-based clinical recommendations regarding professionally applied and prescription-strength, home-use topical fluoride agents for caries prevention. These recommendations are an update of the 2006 ADA recommendations regarding professionally applied topical fluoride and were developed by using a new process that includes conducting a systematic review of primary studies. Types of Studies Reviewed The authors conducted a search of MEDLINE and the Cochrane Library for clinical trials of professionally applied and prescription-strength topical fluoride agents—including mouthrinses, varnishes, gels, foams and pastes—with caries increment outcomes published in English through October 2012. Results The panel included 71 trials from 82 articles in its review and assessed the efficacy of various topical fluoride caries-preventive agents. The panel makes recommendations for further research. Practical Implications The panel recommends the following for people at risk of developing dental caries: 2.26 percent fluoride varnish or 1.23 percent fluoride (acidulated phosphate fluoride) gel, or a prescription-strength, home-use 0.5 percent fluoride gel or paste or 0.09 percent fluoride mouthrinse for patients 6 years or older. Only 2.26 percent fluoride varnish is recommended for children younger than 6 years. The strengths of the recommendations for the recommended products varied from “in favor” to “expert opinion for.” As part of the evidence-based approach to care, these clinical recommendations should be integrated with the practitioner's professional judgment and the patient's needs and preferences. PMID:24177407

  2. Urinary Fluoride Concentration in Children with Disabilities Following Long-Term Fluoride Tablet Ingestion

    ERIC Educational Resources Information Center

    Liu, Hsiu-Yueh; Chen, Jung-Ren; Hung, Hsin-Chia; Hsiao, Szu-Yu; Huang, Shun-Te; Chen, Hong-Sen

    2011-01-01

    Urine is the most commonly utilized biomarker for fluoride excretion in public health and epidemiological studies. Approximately 30-50% of fluoride is excreted from urine in children. Urinary fluoride excretion reflects the total fluoride intake from multiple sources. After administering fluoride tablets to children with disabilities, urinary…

  3. Determination of Stability Constants of Hydrogen and Aluminum Fluorides with a Fluoride-Selective Electrode

    SciTech Connect

    Baumann, E.W.

    2003-01-06

    The ability to directly determine free fluoride ion concentration (or mean activity) simplifies gathering and interpretation of experimental data for studies of metal complexes. In this work, the new lanthanum fluoride electrode was used to measure free fluoride ion in an investigation of the hydrogen-fluoride and aluminum-fluoride systems in NH4NO3.

  4. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  5. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  6. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  7. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  8. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  9. Vapor-liquid equilibria for the systems difluoromethane + hydrogen fluoride, dichlorodifluoromethane + hydrogen fluoride, and chlorine + hydrogen fluoride

    SciTech Connect

    Kang, Y.W.

    1998-01-01

    Isothermal vapor-liquid equilibria for difluoromethane + hydrogen fluoride, dichlorodifluoromethane + hydrogen fluoride, and chlorine + hydrogen fluoride have been measured. The experimental data for the binary systems are correlated with the NRTL equation with the vapor-phase association model for the mixtures containing hydrogen fluoride, and the relevant parameters are presented. The binary system difluoromethane + hydrogen fluoride forms a homogeneous liquid phase, and the others form minimum boiling heterogeneous azeotropes at the experimental conditions.

  10. Molten fluoride fuel salt chemistry

    SciTech Connect

    Toth, L.M.; Del Cul, G.D.; Dai, S.; Metcalf, D.H.

    1994-09-01

    The chemistry of molten fluorides is traced from their development as fuels in the Molten Salt Reactor Experiment with important factors in their selection being discussed. Key chemical characteristics such as solubility, redox behavior, and chemical activity are explained as they relate to the behavior of molten fluoride fuel systems. Fission product behavior is described along with processing experience. Development requirements for fitting the current state of the chemistry to modern nuclear fuel system are described. It is concluded that while much is known about molten fluoride behavior, processing and recycle of the fuel components is a necessary factor if future systems are to be established.

  11. Strontium-90 fluoride data sheet

    SciTech Connect

    Fullam, H.T.

    1981-06-01

    This report is a compilation of available data and appropriate literature references on the properties of strontium-90 fluoride and nonradioactive strontium fluoride. The objective of the document is to compile in a single source pertinent data to assist potential users in the development, licensing, and use of /sup 90/SrF/sub 2/-fueled radioisotope heat sources for terrestrial power conversion and thermal applications. The report is an update of the Strontium-90 Fluoride Data Sheet (BNWL-2284) originally issued in April 1977.

  12. Fluorination utilizing thermodynamically unstable fluorides and fluoride salts thereof

    DOEpatents

    Bartlett, Neil; Whalen, J. Marc; Chacon, Lisa

    2000-12-12

    A method for fluorinating a carbon compound or cationic carbon compound utilizes a fluorination agent selected from thermodynamically unstable nickel fluorides and salts thereof in liquid anhydrous hydrogen fluoride. The desired carbon compound or cationic organic compound to undergo fluorination is selected and reacted with the fluorination agent by contacting the selected organic or cationic organic compound and the chosen fluorination agent in a reaction vessel for a desired reaction time period at room temperature or less.

  13. Fluoride glass: Crystallization, surface tension

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.

    1988-01-01

    Fluoride glass was levitated acoustically in the ACES apparatus on STS-11, and the recovered sample had a different microstructure from samples cooled in a container. Further experiments on levitated samples of fluoride glass are proposed. These include nucleation, crystallization, melting observations, measurement of surface tension of molten glass, and observation of bubbles in the glass. Ground experiments are required on sample preparation, outgassing, and surface reactions. The results should help in the development and evaluation of containerless processing, especially of glass, in the development of a contaminent-free method of measuring surface tensions of melts, in extending knowledge of gas and bubble behavior in fluoride glasses, and in increasing insight into the processing and properties of fluoride glasses.

  14. Do Fluoride Ions Protect Teeth?

    ERIC Educational Resources Information Center

    Parkin, Christopher

    1998-01-01

    Begins with the procedure and results from an investigation on the effect of fluoride on the reaction between eggshell (substitute teeth) and dilute ethanoic acid. Describes an elegantly modified and improvised apparatus. (DDR)

  15. Fluoride bioavailability in saliva and plaque

    PubMed Central

    2012-01-01

    Background Different fluoride formulations may have different effects on caries prevention. It was the aim of this clinical study to assess the fluoride content, provided by NaF compared to amine fluoride, in saliva and plaque. Methods Eight trained volunteers brushed their teeth in the morning for 3 minutes with either NaF or amine fluoride, and saliva and 3-day-plaque-regrowth was collected at 5 time intervals during 6 hours after tooth brushing. The amount of collected saliva and plaque was measured, and the fluoride content was analysed using a fluoride sensitive electrode. All subjects repeated all study cycles 5 times, and 3 cycles per subject underwent statistical analysis using the Wilcoxon-Mann-Whitney test. Results Immediately after brushing the fluoride concentration in saliva increased rapidly and dropped to the baseline level after 360 minutes. No difference was found between NaF and amine fluoride. All plaque fluoride levels were elevated after 30 minutes until 120 minutes after tooth brushing, and decreasing after 360 minutes to baseline. According to the highly individual profile of fluoride in saliva and plaque, both levels of bioavailability correlated for the first 30 minutes, and the fluoride content of saliva and plaque was back to baseline after 6 hours. Conclusions Fluoride levels in saliva and plaque are interindividually highly variable. However, no significant difference in bioavailability between NaF and amine fluoride, in saliva, or in plaque was found. PMID:22230722

  16. Industrial fluoride pollution. Chronic fluoride poisoning in Cornwall Island cattle.

    PubMed

    Krook, L; Maylin, G A

    1979-04-01

    An aluminum plant on the south bank of the St. Lawrence river, southwest of Cornwall Island, Ontario, Canada, has emitted 0.816 metric tons of fluoride daily since 1973; considerably higher amounts were emitted from 1959 to 1973. The plant has been designated as the "major source of fluoride emissions impacting on Cornwall Island." Chronic fluoride poisoning in Cornwall island cattle was manifested clinically by stunted growth and dental fluorosis to a degree of severe interference with drinking and mastication. Cows died at or were slaughtered after the third pregnancy. The deterioration of cows did not allow further pregnancies. Fluoride concentrations in ash of biopsied coccygeal vertebrae increased significantly with age and were dependent on distance from and direction to the aluminum plant. Fluoride in bone ash of a 7-month old-fetus exceeded 500 ppm; fluoride thus was passed transplacentally. Analyses of fluoride in ash of bones obtained at necropsy of cattle from 4 months of age to 4 to 5 years of age showed increased amounts with age. Cancellous bone retained far higher amounts than cortical bone, a reflection of the normally higher metabolic rate of cancellous bone. Concentrations exceeding 10,000 ppm fluoride were recorded in cancellous bone of a 4-to 5-year-old cow. The target cells for fluoride in chronic fluorosis were shown to be the ameloblasts, the dental pulp cells and the odontoblasts and, in bone, primarily the resorbing osteocytes and also the osteoblasts. Atrophy and necrosis of the ameloblasts were responsible for enamel defects. The existing enamel showed brown discoloration from fluoride deposits. The pulp cells underwent fibrous and osseous metaplasia and necrosis of the ectopic bone occurred. The odontoblasts were atrophic and the dentin showed brown discoloration. The resorbing osteocytes were inactive and osteosclerosis resulted. This was especially pronounced in areas of normally great apposition, i.e. in the metaphyses. The epiphyseal

  17. Microcratering in Polyvinylidene Fluoride

    NASA Astrophysics Data System (ADS)

    Shu, Anthony John

    Dust is defined as macroparticles as small as a few molecules up to several micrometers in diameter. In the context of space exploration, it was originally seen only as a technical obstacle to applications; dust can damage instrument surfaces, coat mating surfaces preventing proper seals, and impair or obstruct measurements. Because of the ubiquity of dust in the solar system and its role in the origin of planets and other bodies, the study of dust and related phenomena has evolved to a scientific subdiscipline which can provide us insight into the origins and evolution of our solar system. In order to facilitate this, a hypervelocity dust accelerator has been built at the University of Colorado at Boulder and is being used to probe impact phenomena, dust mitigation techniques, dust detection techniques, and more. One such dust detector is a Polyvinylidene Fluoride (PVDF) dust detector. The PVDF dust detector is very lightweight and consumes little power. Due to these properties, PVDF detectors can potentially be used on any spacecraft to gain information on the local dust environment. It is not fully understood how this PVDF dust detector signal is generated, so at present can only be used as a dust counter. In this thesis I discuss the importance of the study of dust phenomena, describe the accelerator experiment, and describe a study conducted to determine the underlying physical principles of PVDF dust detectors. This included measuring crater size scaling laws, measuring the detailed shape of craters, and applying this data to simulations of the signals being generated by PVDF detectors.

  18. A Manual for Rural School Fluoridation.

    ERIC Educational Resources Information Center

    Sprouse, Larman W.; Brooks, John

    The product of a 1972 Dental Health Branch contract with the U.S. Public Health Service, this manual is designed to aid in the development of school fluoridation programs and presents: background information on general concepts relating to the action of fluoride on teeth; discussions dealing with community and school fluoridation studies; and the…

  19. The Effect of Fluoride in Osteoporosis.

    ERIC Educational Resources Information Center

    Hedlund, L. R.; Gallagher, J. C.

    1987-01-01

    This article discusses the effect of fluoride on bone tissue and the possible role of fluoride in the treatment of osteoporosis. At present, fluoride treatment should be restricted to clinical trials until its risks and benefits have been further evaluated. (Author/MT)

  20. Fluoride uptake by Streptococcus mutans 6715.

    PubMed Central

    Whitford, G M; Schuster, G S; Pashley, D H; Venkateswarlu, P

    1977-01-01

    The short-term kinetics of fluoride uptake by cells from 20- to 22-h cultures of Streptococcus mutans strain 6715 were studied using rapid filtration and centrifugation techniques. Saline-suspended organisms were diluted with fluoride-containing solutions buffered at four different pH values (2.0, 4.0, 5.5, and 8.2). Fluoride disappearance from the medium was inversely related to pH and to the duration of the exposure at any given pH. The uptake was rapid and extensive at the lower pH values and decreased as the pH increased. Media fluoride concentrations subsequently increased; i.e., fluoride was released from the cells. The presence of glucose, cyanide, or iodoacetate did not influence the results. However, preincubation of the cells in fluoride-free buffers, followed by the addition of fluoride, reduced fluoride uptake markedly. Cell-to-media pH gradients were determined by the distribution of 14C-labeled 5,5-dimethyl-2,4-oxazolidinedione. Fluoride uptake was found to be a function of the magnitude of the pH gradient (P less than 0.001). It is hypothesized that fluoride uptake occurs by the diffusion of hydrogen fluoride and the subsequent trapping of ionic fluoride. PMID:22490

  1. Anhydrous hydrogen fluoride electrolyte battery. [Patent application

    DOEpatents

    Not Available

    1972-06-26

    It is an object of the invention to provide a primary cell or battery using ammonium fluoride--anhydrous hydrogen fluoride electrolyte having improved current and power production capabilities at low temperatures. It is operable at temperatures substantially above the boiling point of hydrogen fluoride. (GRA)

  2. METHOD OF PREPARING METAL FLUORIDES

    DOEpatents

    Katz, J.J.; Sheft, I.

    1959-08-11

    A method is presented for preparing the halides of elements which are relatively non-reactive with halogenating agents. The method involves reacting a mixture of an oxygen containing salt of a difficulty halogenated metal with an oxygen containing salt of an easily halogenated metal with a halogenating agent. Accordingly plutonium tetrafluoride is produced by reacting a mixture of plutonium dioxide and uranium octaoxide with bromine trifluoride. The reaction proceeds smoothly at moderate temperatures and the resulting plutonium trifluoride may be readily separated from many impurities which form volatile fluorides by volatilizing these volatile fluorides from the reaction chamber.

  3. Plasma acylated and plasma unacylated ghrelin: useful new biomarkers in patients with neuroendocrine tumors?

    PubMed

    van Adrichem, Roxanne C S; van der Lely, Aart Jan; Huisman, Martin; Kramer, Piet; Feelders, Richard A; Delhanty, Patric J D; de Herder, Wouter W

    2016-07-01

    To date, the value of fasting plasma acylated ghrelin (AG) and unacylated ghrelin (UAG) as potential novel biomarkers in patients with neuroendocrine tumors (NETs) is unknown. The aims of this study are to (i) compare fasting AG and UAG levels between nonobese, nondiabetic NET patients (N=28) and age- (±3 years) and sex-matched nonobese, nondiabetic controls (N=28); and (ii) study the relationship between AG, UAG, and AG/UAG ratios and biochemical (chromogranin-A (CgA) and neuron-specific enolase (NSE) levels) and clinical parameters (age at diagnosis, sex, primary tumor location, carcinoid syndrome, ENETS TNM classification, Ki-67 proliferation index, grading, prior incomplete surgery) in NET patients. Fasting venous blood samples (N=56) were collected and directly stabilized with 4-(2-aminoethyl) benzenesulfonyl fluoride hydrochloride after withdrawal. Plasma AG and UAG levels were determined by ELISA. Expression of ghrelin was examined in tumor tissue by immunohistochemistry. There were no significant differences between NET patients and controls in AG (median: 62.5 pg/mL, IQR: 33.1-112.8 vs median: 57.2pg/mL, IQR: 26.7-128.3, P=0.66) and UAG in levels (median: 76.6pg/mL, IQR: 35.23-121.7 vs median: 64.9, IQR: 27.5-93.1, P=0.44). No significant correlations were found between AG, UAG, and AG/UAG ratios versus biochemical and clinical parameters in NET patients with the exception of age at diagnosis (AG: ρ= -0.47, P=0.012; AG/UAG ratio: ρ= -0.50, P=0.007) and baseline chromogranin-A levels (AG/UAG ratio: ρ= -0.44, P=0.019). In our view, fasting plasma acylated and unacylated ghrelin appear to have no value as diagnostic biomarkers in the clinical follow-up of patients with NETs. PMID:27215920

  4. X-Ray Crystallographic Structure of the Norwalk Virus Protease at 1.5-Å Resolution

    PubMed Central

    Zeitler, Corinne E.; Estes, Mary K.; Venkataram Prasad, B. V.

    2006-01-01

    Norwalk virus (NV), a member of the Caliciviridae family, is the major cause of acute, epidemic, viral gastroenteritis. The NV genome is a positive sense, single-stranded RNA that encodes three open reading frames (ORFs). The first ORF produces a polyprotein that is processed by the viral cysteine protease into six nonstructural proteins. We have determined the structure of the NV protease to 1.5 and 2.2 Å from crystals grown in the absence or presence, respectively, of the protease inhibitor AEBSF [4-(2-aminoethyl)-benzenesulfonyl fluoride]. The protease, which crystallizes as a stable dimer, exhibits a two-domain structure similar to those of other viral cysteine proteases with a catalytic triad composed of His 30, Glu 54, and Cys 139. The native structure of the protease reveals strong hydrogen bond interactions between His 30 and Glu 54, in the favorable syn configuration, indicating a role of Glu 54 during proteolysis. Mutation of this residue to Ala abolished the protease activity, in a fluorogenic peptide substrate assay, further substantiating the role of Glu 54 during proteolysis. These observations contrast with the suggestion, from a previous study of another norovirus protease, that this residue may not have a prominent role in proteolysis (K. Nakamura, Y. Someya, T. Kumasaka, G. Ueno, M. Yamamoto, T. Sato, N. Takeda, T. Miyamura, and N. Tanaka, J. Virol. 79:13685-13693, 2005). In the structure from crystals grown in the presence of AEBSF, Glu 54 undergoes a conformational change leading to disruption of the hydrogen bond interactions with His 30. Since AEBSF was not apparent in the electron density map, it is possible that these conformational changes are due to subtle changes in pH caused by its addition during crystallization. PMID:16641296

  5. Potential role of proprotein convertase SKI-1 in the mineralization of primary bone.

    PubMed

    Gorski, Jeff P; Huffman, Nichole T; Cui, Chaoying; Henderson, Ellen P; Midura, Ronald J; Seidah, Nabil G

    2009-01-01

    The biochemical mechanism controlling nucleation of mineral crystals in developing bone, along with the growth and propagation of these crystals once formed, remains poorly understood. To define the nucleation mechanism, a proteomics analysis was begun on isolated biomineralization foci (BMF), sites of initial crystal nucleation in osteoblastic cell cultures and in primary bone. Comparative analyses of the protein profile for mineralized BMF with that for total osteoblast cultures revealed the latter were enriched in several proteins including BAG-75 and BSP, as well as fragments of each. When 12 protease inhibitors were added separately to UMR 106-01 osteoblastic cultures, only the serine protease inhibitor 4-(2-aminoethyl) benzenesulfonyl fluoride hydrochloride (AEBSF) blocked cleavage of BAG-75 and BSP, and prevented mineral crystal nucleation within BMF. Consideration of the specificities of the inhibitors tested and the fact that AEBSF inhibition was not dependent upon inclusion of FBS in the culture media indicated that mineral nucleation does not require serine protease plasmin, thrombin, kallikrein, urokinase, C1s or furin. In contrast, SKI-1 (S1P or site-1) is a membrane-bound serine protease inhibitable by AEBSF. We show here for the first time that mineralizing UMR 106 cells express a 98-kDa active, soluble form of SKI-1 within BMF. In contrast, nonmineralizing UMR cells appear to differentially process SKI-1 into smaller immunoreactive fragments (<35 kDa). These findings suggest that SKI-1 plays a direct or indirect role in assembly of functional nucleation complexes containing BAG-75 and BSP and their fragments, thus facilitating initial mineral nucleation within these biomineralization foci. PMID:18728345

  6. PI3K and ERK1/2 kinase inhibition potentiate protease inhibitor to attenuate allergen induced Th2 immune response in mouse.

    PubMed

    Saw, Sanjay; Arora, Naveen

    2016-04-01

    Proteases affect immune response by activating PI3K, ERK1/2 and p38 kinase. In present study, therapeutic effect of PI3K, ERK1/2 and p38 kinase inhibitor in combination with serine protease inhibitor was evaluated in cockroach extract (CE) induced airway inflammatory disease. Mice were sensitized on day 0, 7 and 14 and challenged on day 27, 28 and 29 with CE. Mice were given PI3K, ERK1/2 and the p38 kinase inhibitor (iPI3K, iERK1/2 and the ip38) alone or with serine protease inhibitor 4-(2-Aminoethyl) benzenesulfonyl fluoride hydrochloride (AEBSF), 1h before challenge. On day 30 airway resistance of mice were determined and euthanized to collect blood, BAL fluid and lung for analysis. CE immunized mice showed PI3K, ERK1/2 and p38 kinase activation, increased airway resistance, cellular infiltration, Th2 cytokines IgE and IgG1. AEBSF given to mice reduced the CE induced allergic response. AEBSF given in combination of iPI3K/iERK1/2 reduced cellular infiltration in lungs. Furthermore, iPI3K/iERK1/2 with AEBSF significantly reduced the CE induced Th2 cytokines in comparison to monotherapy of kinase inhibitor and AEBSF (P<0.05). The combination of iPI3K/iERK1/2 with AEBSF enhanced IL-12 level that could further provide a mean of Th2 reduction. Best effect in reduction of allergic response in mice was observed on administration of AEBSF with iPI3K. Conclusively, the combination of PI3K kinase inhibitor with AEBSF reduced allergen induced airway response and has therapeutic potential for add-on therapy in allergic airway disease. PMID:26905476

  7. An Atypical Proprotein Convertase in Giardia lamblia Differentiation

    PubMed Central

    Davids, B. J.; Gilbert, M. A.; Liu, Q.; Reiner, D. S.; Smith, A. J.; Lauwaet, T.; Lee, C.; McArthur, A. G.; Gillin, F. D.

    2010-01-01

    Proteolytic activity is important in the lifecycles of parasites and their interactions with hosts. Cysteine proteases have been best studied in Giardia, but other protease classes have been implicated in growth and/or differentiation. In this study, we employed bioinformatics to reveal the complete set of putative proteases in the Giardia genome. We identified 73 peptidase homologues distributed over 5 catalytic classes in the genome. Serial analysis of gene expression of the G. lamblia lifecycle found thirteen protease genes with significant transcriptional variation over the lifecycle, with only one serine protease transcript upregulated late in encystation. The translated gene sequence of this encystation-specific transcript was most similar to eukaryotic subtilisin-like proprotein convertases (SPC), although the typical catalytic triad was not identified. Epitope-tagged gSPC protein expressed in Giardia under its own promoter was upregulated during encystation with highest expression in cysts and it localized to encystation-specific secretory vesicles (ESV). Total gSPC from encysting cells produced proteolysis in gelatin gels that co-migrated with the epitope-tagged protease in immunoblots. Immuno-purified gSPC also had gelatinase activity. To test whether endogenous gSPC activity is involved in differentiation, trophozoites and cysts were exposed to the specific serine proteinase inhibitor 4-(2-Aminoethyl)-benzenesulfonyl fluoride hydrochloride (AEBSF). After 21 h encystation, a significant decrease in ESV was observed with 1 mM AEBSF and by 42 h the number of cysts was significantly reduced, but trophozoite growth was not inhibited. Concurrently, levels of cyst wall proteins 1 and 2, and AU1-tagged gSPC protein itself were decreased. Excystation of G. muris cysts was also significantly reduced in the presence of AEBSF. These results support the idea that serine protease activity is essential for Giardia encystation and excystation. PMID:21075147

  8. Special Report: Fluoridation of Water.

    ERIC Educational Resources Information Center

    Hileman, Bette

    1988-01-01

    Reviews the controversy regarding water fluoridation in the United States during the last 50 years. Discusses the current status; benefits; and health risks including skeletal fluorosis, kidney disease, hypersensitivity, mutagenic effects, birth defects, and cancer. Presents statistics and anecdotal accounts. (CW)

  9. Spectral diversity crystalline fluoride lasers

    SciTech Connect

    Jenssen, H.P.; Gabbe, D.R.; Linz, A.; Naiman, C.S.

    1981-01-01

    Within the realm of crystalline laser materials, the class of fluorides distinguishes itself mostly by the wide variety of laser wavelengths displayed. Laser operation has now been reported from 3.9 micrometers in the infrared to 286 nm in the ultraviolet. Many are operated flash-lamp pumped, while others have shown high utility as linear down conversion lasers and rare earth ion, while others are sensitized by other co-dopants which absorb the pump energy and transfer it to the active laser ions. The potential of large spectral diversity for laser operation is due both to the wide window of transparency that fluorides possess and the lower rates of nonradiative decay. The high band gap in the ultraviolet also leads to low linear absorption, low nonlinear refractive indices and multiphoton absorption. Additionally, the good chemical stability displayed by high-purity stoichiometric fluoride compounds allows their use with ultraviolet pump sources at high energies, without incurring UV-induced damage. The most recent research associated with such materials, particularly the host crystal, lithium yttrium fluoride, LiYF4 (YLF) is reviewed.

  10. [Absorption of fluorides by synthetic hydroxyapatites].

    PubMed

    Yévenes, I; Sánchez, U; Medina, M E

    1988-01-01

    We studied the adsorption of sodium fluoride, ammonium fluoride, tin fluoride and sodium monofluorophosphate to synthetic hydroxiapatite in function of the pH (pH 4.7, 5.5 and 6.1). In two models; in a first model was eluted the fluorides of the hydroxiapatite column with artificial saliva; in the second model were incubated the fluoride with bufferized hydroxiapatite to the above pH. The fluoride determination was done by potentiometric method with a specific ion activity electrode. The results in the elution indicated that the sodium and tin fluorides give elution levels different at the pH studied. By other hand ammonium fluoride did not present differences. The results with incubation demonstrated that ammonium fluoride gives the greater adsorption, the sodium fluoride is slightly lower, and the sodium monofluorophosphate the lowest. Also, was observed that the adsorption decrease with the increase of the pH for the three fluorides. The comparison of both models showed that the incubation presented higher values of adsorption than the elution for the pH studied. PMID:3155417

  11. The role of fluoride in erosion therapy.

    PubMed

    Huysmans, Marie-Charlotte; Young, Alix; Ganss, Carolina

    2014-01-01

    The role of fluoride in erosion therapy has long been questioned. However, recent research has yielded positive results. In this chapter, an overview of the literature is provided regarding the application of fluorides in the prevention and treatment of erosion and erosive wear. The results are presented and discussed for different fluoride sources such as monovalent and polyvalent fluorides, and for different vehicles such as toothpastes, solutions and rinses, as well as varnishes and gels. It is concluded that fluoride applications are very likely to be of use in the preventive treatment of erosive wear. Most promising are high-concentration, acidic formulations and the polyvalent fluoride sources, with the best evidence available for stannous fluoride. However, the evidence base for clinical effectiveness is still small. PMID:24993271

  12. Fluoride in groundwater: toxicological exposure and remedies.

    PubMed

    Jha, S K; Singh, R K; Damodaran, T; Mishra, V K; Sharma, D K; Rai, Deepak

    2013-01-01

    Fluoride is a chemical element that is found most frequently in groundwater and has become one of the most important toxicological environmental hazards globally. The occurrence of fluoride in groundwater is due to weathering and leaching of fluoride-bearing minerals from rocks and sediments. Fluoride when ingested in small quantities (<0.5 mg/L) is beneficial in promoting dental health by reducing dental caries, whereas higher concentrations (>1.5 mg/L) may cause fluorosis. It is estimated that about 200 million people, from among 25 nations the world over, may suffer from fluorosis and the causes have been ascribed to fluoride contamination in groundwater including India. High fluoride occurrence in groundwaters is expected from sodium bicarbonate-type water, which is calcium deficient. The alkalinity of water also helps in mobilizing fluoride from fluorite (CaF2). Fluoride exposure in humans is related to (1) fluoride concentration in drinking water, (2) duration of consumption, and (3) climate of the area. In hotter climates where water consumption is greater, exposure doses of fluoride need to be modified based on mean fluoride intake. Various cost-effective and simple procedures for water defluoridation techniques are already known, but the benefits of such techniques have not reached the rural affected population due to limitations. Therefore, there is a need to develop workable strategies to provide fluoride-safe drinking water to rural communities. The study investigated the geochemistry and occurrence of fluoride and its contamination in groundwater, human exposure, various adverse health effects, and possible remedial measures from fluoride toxicity effects. PMID:23573940

  13. Alimentary fluoride intake in preschool children

    PubMed Central

    2011-01-01

    Background The knowledge of background alimentary fluoride intake in preschool children is of utmost importance for introducing optimal and safe caries preventive measures for both individuals and communities. The aim of this study was to assess the daily fluoride intake analyzing duplicate samples of food and beverages. An attempt was made to calculate the daily intake of fluoride from food and swallowed toothpaste. Methods Daily alimentary fluoride intake was measured in a group of 36 children with an average age of 4.75 years and an average weight of 20.69 kg at baseline, by means of a double plate method. This was repeated after six months. Parents recorded their child's diet over 24 hours and collected duplicated portions of food and beverages received by children during this period. Pooled samples of food and beverages were weighed and solid food samples were homogenized. Fluoride was quantitatively extracted from solid food samples by a microdiffusion method using hexadecyldisiloxane and perchloric acid. The content of fluoride extracted from solid food samples, as well as fluoride in beverages, was measured potentiometrically by means of a fluoride ion selective electrode. Results Average daily fluoride intake at baseline was 0.389 (SD 0.054) mg per day. Six months later it was 0.378 (SD 0.084) mg per day which represents 0.020 (SD 0.010) and 0.018 (SD 0.008) mg of fluoride respectively calculated per kg bw/day. When adding the values of unwanted fluoride intake from the toothpaste shown in the literature (0.17-1.21 mg per day) the estimate of the total daily intake of fluoride amounted to 0.554-1.594 mg/day and recalculated to the child's body weight to 0.027-0.077 mg/kg bw/day. Conclusions In the children studied, observed daily fluoride intake reached the threshold for safe fluoride intake. When adding the potential fluoride intake from swallowed toothpaste, alimentary intake reached the optimum range for daily fluoride intake. These results showed that

  14. Dynamics of Fluoride Bioavailability in the Biofilms of Different Oral Surfaces after Amine Fluoride and Sodium Fluoride Application.

    PubMed

    Naumova, Ella A; Dickten, Christoph; Jung, Rico; Krauss, Florian; Rübesamen, Henrik; Schmütsch, Katharina; Sandulescu, Tudor; Zimmer, Stefan; Arnold, Wolfgang H

    2016-01-01

    It was the aim of this study to investigate differences in fluoride bioavailability in different oral areas after the application of amine fluoride (AmF) and sodium fluoride (NaF). The null hypothesis suggested no differences in the fluoride bioavailability. The tongue coating was removed and biofilm samples from the palate, oral floor and cheeks were collected. All subjects brushed their teeth with toothpaste containing AmF or NaF. Specimens were collected before, as well as immediately after and at 30 and 120 minutes after tooth brushing. The fluoride concentration was determined. The area under the curve was calculated for each location and compared statistically. In the tongue coating, fluoride concentration increased faster after NaF application than after AmF application. After 30 minutes, the fluoride concentration decreased and remained stable until 120 minutes after AmF application and returned to baseline after NaF application. The difference between the baseline and the endpoint measurements was statistically significant. The fluoride concentration in the tongue coating remained at a higher level compared with the baseline for up to 120 minutes post-brushing. This may indicate that the tongue coating is a major reservoir for fluoride bioavailability. The results also indicate an unequal fluoride distribution in the oral cavity. PMID:26727989

  15. Dynamics of Fluoride Bioavailability in the Biofilms of Different Oral Surfaces after Amine Fluoride and Sodium Fluoride Application

    PubMed Central

    Naumova, Ella A.; Dickten, Christoph; Jung, Rico; Krauss, Florian; Rübesamen, Henrik; Schmütsch, Katharina; Sandulescu, Tudor; Zimmer, Stefan; Arnold, Wolfgang H.

    2016-01-01

    It was the aim of this study to investigate differences in fluoride bioavailability in different oral areas after the application of amine fluoride (AmF) and sodium fluoride (NaF). The null hypothesis suggested no differences in the fluoride bioavailability. The tongue coating was removed and biofilm samples from the palate, oral floor and cheeks were collected. All subjects brushed their teeth with toothpaste containing AmF or NaF. Specimens were collected before, as well as immediately after and at 30 and 120 minutes after tooth brushing. The fluoride concentration was determined. The area under the curve was calculated for each location and compared statistically. In the tongue coating, fluoride concentration increased faster after NaF application than after AmF application. After 30 minutes, the fluoride concentration decreased and remained stable until 120 minutes after AmF application and returned to baseline after NaF application. The difference between the baseline and the endpoint measurements was statistically significant. The fluoride concentration in the tongue coating remained at a higher level compared with the baseline for up to 120 minutes post-brushing. This may indicate that the tongue coating is a major reservoir for fluoride bioavailability. The results also indicate an unequal fluoride distribution in the oral cavity. PMID:26727989

  16. Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins

    PubMed Central

    Li, Sanshu; Smith, Kathryn D.; Davis, Jared H.; Gordon, Patricia B.; Breaker, Ronald R.; Strobel, Scott A.

    2013-01-01

    Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, 18F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions. PMID:24173035

  17. Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins.

    PubMed

    Li, Sanshu; Smith, Kathryn D; Davis, Jared H; Gordon, Patricia B; Breaker, Ronald R; Strobel, Scott A

    2013-11-19

    Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, (18)F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions. PMID:24173035

  18. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used... fluoride resins consist of basic resins produced by the polymerization of vinylidene fluoride. (b)...

  19. DISSOLUTION OF LANTHANUM FLUORIDE PRECIPITATES

    DOEpatents

    Fries, B.A.

    1959-11-10

    A plutonium separatory ore concentration procedure involving the use of a fluoride type of carrier is presented. An improvement is given in the derivation step in the process for plutonium recovery by carrier precipitation of plutonium values from solution with a lanthanum fluoride carrier precipitate and subsequent derivation from the resulting plutonium bearing carrier precipitate of an aqueous acidic plutonium-containing solution. The carrier precipitate is contacted with a concentrated aqueous solution of potassium carbonate to effect dissolution therein of at least a part of the precipitate, including the plutonium values. Any remaining precipitate is separated from the resulting solution and dissolves in an aqueous solution containing at least 20% by weight of potassium carbonate. The reacting solutions are combined, and an alkali metal hydroxide added to a concentration of at least 2N to precipitate lanthanum hydroxide concomitantly carrying plutonium values.

  20. Silicon oxidation in fluoride solutions

    NASA Technical Reports Server (NTRS)

    Sancier, K. M.; Kapur, V.

    1980-01-01

    Silicon is produced in a NaF, Na2SiF6, and Na matrix when SiF4 is reduced by metallic sodium. Hydrogen is evolved during acid leaching to separate the silicon from the accompanying reaction products, NaF and Na2SiF6. The hydrogen evolution reaction was studied under conditions simulating leaching conditions by making suspensions of the dry silicon powder in aqueous fluoride solutions. The mechanism for the hydrogen evolution is discussed in terms of spontaneous oxidation of silicon resulting from the cooperative effects of (1) elemental sodium in the silicon that reacts with water to remove a protective silica layer, leaving clean reactive silicon, and (2) fluoride in solution that complexes with the oxidized silicon in solution and retards formation of a protective hydrous oxide gel.

  1. Systematic review of water fluoridation

    PubMed Central

    McDonagh, Marian S; Whiting, Penny F; Wilson, Paul M; Sutton, Alex J; Chestnutt, Ivor; Cooper, Jan; Misso, Kate; Bradley, Matthew; Treasure, Elizabeth; Kleijnen, Jos

    2000-01-01

    Objective To review the safety and efficacy of fluoridation of drinking water. Design Search of 25 electronic databases and world wide web. Relevant journals hand searched; further information requested from authors. Inclusion criteria were a predefined hierarchy of evidence and objectives. Study validity was assessed with checklists. Two reviewers independently screened sources, extracted data, and assessed validity. Main outcome measures Decayed, missing, and filled primary/permanent teeth. Proportion of children without caries. Measure of effect was the difference in change in prevalence of caries from baseline to final examination in fluoridated compared with control areas. For potential adverse effects, all outcomes reported were used. Results 214 studies were included. The quality of studies was low to moderate. Water fluoridation was associated with an increased proportion of children without caries and a reduction in the number of teeth affected by caries. The range (median) of mean differences in the proportion of children without caries was −5.0% to 64% (14.6%). The range (median) of mean change in decayed, missing, and filled primary/permanent teeth was 0.5 to 4.4 (2.25) teeth. A dose-dependent increase in dental fluorosis was found. At a fluoride level of 1 ppm an estimated 12.5% (95% confidence interval 7.0% to 21.5%) of exposed people would have fluorosis that they would find aesthetically concerning. Conclusions The evidence of a beneficial reduction in caries should be considered together with the increased prevalence of dental fluorosis. There was no clear evidence of other potential adverse effects. PMID:11021861

  2. Fluoride laser crystals: old and new

    NASA Astrophysics Data System (ADS)

    Jenssen, Hans P.; Cassanho, Arlete

    2006-02-01

    The development of oxide and fluoride materials as gain materials of choice for solid state lasers ranges from early materials such as Calcium Fluoride and Calcium Tungstate crystals to the now ubiquitous Nd hosts YLF, YAG and Vanadate. Among Tunable laser materials, MgF II - an early favorite, gave way to superior oxides such as Alexandrite and Ti:Sapphire only to be followed by development of still newer tunable fluoride media, notably, fluoride colquiriites such as Cr-doped LiSAF and LiCaF. Newer fluoride crystals, such as Barium Yttrium Fluoride BaY II F 8 (BYF), KY 3F 10 (KYF) and the tunable Cr doped LiCaGaF 6 are attractive laser materials, but their growth has not been optimized. Key advantages of two of these new crystals are discussed. Crystal growth results for BYF and Cr:LiCaGaF 6 as well as some material characterization are presented.

  3. Spectrophotometric determination of fluoride in fluoride-bearing minerals after decomposition by fusion with sodium hydroxide.

    PubMed

    Adelantado, J V; Martinez, V P; Moreno, A C; Reig, F B

    1985-03-01

    The decomposition of highly insoluble minerals (fluorspar and cryolite) by fusion with molten alkali-metal hydroxides is studied. The introduction of additives such as aluminium compounds or sodium peroxide to obtain total liberation of fluoride from calcium fluoride samples, is tested. The fusion is done in a silver crucible with a Bunsen burner. The cooled melt is easily soluble, giving solutions suitable for spectrophotometric fluoride determination by the Zr(IV)-fluoride-Erichrome Cyanine R method. PMID:18963832

  4. FLUORIDATION CHEMISTRY: EQUILIBRIA AND KINETICS OF FLUORIDE AND FLUORO-COMPLEXES

    EPA Science Inventory

    The most common fluoridating agents used by major American waterworks are hexafluorosilicic acid (H2SiF6) and sodium hexxafluorosilicate (Na2SiF6). According to the 1992 Water Fluoridation Census where 10,002 utilities responded affirmatively to fluoridating their water, 59
    % ...

  5. PRECIPITATION OF URANIUM PEROXIDE OF LOW FLUORIDE CONTENT FROM SOLUTIONS CONTAINING FLUORIDES

    DOEpatents

    King, E.J.; Clark, H.M.

    1958-08-12

    S>A method is described for the preparation of fluoride free uraniunn peroxide precipitates, even though the solution from which the precipitation is made is contaminated with fluorides. This is accomplished by add ing aluminum ions to the solution, where they complex any fluoride present and prevent its precipitation with the uramum peroxide.

  6. Fluoride coatings make effective lubricants in molten sodium environment

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Coating bearing surfaces with calcium fluoride-barium fluoride film provides effective lubrication against sliding friction in molten sodium and other severe environments at high and low temperatures.

  7. Fluorescent sensing of fluoride in cellular system.

    PubMed

    Jiao, Yang; Zhu, Baocun; Chen, Jihua; Duan, Xiaohong

    2015-01-01

    Fluoride ions have the important roles in a lot of physiological activities related with biological and medical system, such as water fluoridation, caries treatment, and bone disease treatment. Great efforts have been made to develop new methods and strategies for F(-) detection in the past decades. Traditional methods for the detection of F(-) including ion chromatography, ion-selective electrodes, and spectroscopic techniques have the limitations in the biomedicine research. The fluorescent probes for F(-) are very promising that overcome some drawbacks of traditional fluoride detection methods. These probes exhibit high selectivity, high sensitivity as well as quick response to the detection of fluoride anions. The review commences with a brief description of photophysical mechanisms for fluorescent probes for fluoride, including photo induced electron transfer (PET), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), and excited-state intramolecular proton transfer (ESIPT). Followed by a discussion about common dyes for fluorescent fluoride probes, such as anthracene, naphalimide, pyrene, BODIPY, fluorescein, rhodamine, resorufin, coumarin, cyanine, and near-infrared (NIR) dyes. We divide the fluorescent probes for fluoride in cellular application systems into nine groups, for example, type of hydrogen bonds, type of cleavage of Si-O bonds, type of Si-O bond cleavage and cylization reactions, etc. We also review the recent reported carriers in the delivery of fluorescent fluoride probes. Seventy-four typical fluorescent fluoride probes are listed and compared in detail, including quantum yield, reaction medium, excitation and emission wavelengths, linear detection range, selectivity for F(-), mechanism, and analytical applications. Finally, we discuss the future challenges of the application of fluorescent fluoride probes in cellular system and in vivo. We wish that more and more excellent fluorescent fluoride probes will be

  8. Fluoride in drinking water and dental fluorosis.

    PubMed

    Mandinic, Zoran; Curcic, Marijana; Antonijevic, Biljana; Carevic, Momir; Mandic, Jelena; Djukic-Cosic, Danijela; Lekic, Charles P

    2010-08-01

    In this study we determined the fluoride content in drinking water and hair of 12-year-old schoolchildren from different Serbian municipalities, i.e. Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja. The analyses were performed using composite fluoride ion-selective electrode. Average fluoride levels were 0.10, 0.15, 0.79 and 11 ppm in well water, 0.07, 0.10, 0.17 and 0.15 ppm in tap water, 19.3, 21.5, 25.4, and 32.5 ppm in hair samples, in Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja, respectively. Correlation analysis indicated statistically significant positive relationship between fluoride in wells water and fluoride in hair, for all municipalities: correlation coefficients were 0.54 (p < 0.05), 0.89, 0.97 and 0.99 (p < 0.001), in Vranjska Banja, Valjevo, Veliko Gradiste, and Kacarevo, respectively. Positive correlation was obtained also between fluoride in tap water and hair samples in all regions under the study, with statistical significance only in Valjevo municipality, p < 0.05. Dental examination of schoolchildren confirmed dental fluorosis only in the region of Vranjska Banja. Moreover, in endemic fluorotic region of Vranjska Banja, positive and statistically significant correlations were confirmed between fluoride in well water and dental fluorosis level (r = 0.61; p < 0.01) and additionally between fluoride in hair and dental fluorosis level (0.62; p < 0.01). The primary findings from this study have shown that fluoride content in hair is highly correlated with fluoride content in drinking water and dental fluorosis level, indicating that hair may be regarded as biomaterial of high informative potential in evaluating prolonged exposure to fluorides and to individuate children at risk of fluorosis regardless of the phase of teeth eruption. PMID:20580811

  9. Fluorescent Sensing of Fluoride in Cellular System

    PubMed Central

    Jiao, Yang; Zhu, Baocun; Chen, Jihua; Duan, Xiaohong

    2015-01-01

    Fluoride ions have the important roles in a lot of physiological activities related with biological and medical system, such as water fluoridation, caries treatment, and bone disease treatment. Great efforts have been made to develop new methods and strategies for F- detection in the past decades. Traditional methods for the detection of F- including ion chromatography, ion-selective electrodes, and spectroscopic techniques have the limitations in the biomedicine research. The fluorescent probes for F- are very promising that overcome some drawbacks of traditional fluoride detection methods. These probes exhibit high selectivity, high sensitivity as well as quick response to the detection of fluoride anions. The review commences with a brief description of photophysical mechanisms for fluorescent probes for fluoride, including photo induced electron transfer (PET), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), and excited-state intramolecular proton transfer (ESIPT). Followed by a discussion about common dyes for fluorescent fluoride probes, such as anthracene, naphalimide, pyrene, BODIPY, fluorescein, rhodamine, resorufin, coumarin, cyanine, and near-infrared (NIR) dyes. We divide the fluorescent probes for fluoride in cellular application systems into nine groups, for example, type of hydrogen bonds, type of cleavage of Si-O bonds, type of Si-O bond cleavage and cylization reactions, etc. We also review the recent reported carriers in the delivery of fluorescent fluoride probes. Seventy-four typical fluorescent fluoride probes are listed and compared in detail, including quantum yield, reaction medium, excitation and emission wavelengths, linear detection range, selectivity for F-, mechanism, and analytical applications. Finally, we discuss the future challenges of the application of fluorescent fluoride probes in cellular system and in vivo. We wish that more and more excellent fluorescent fluoride probes will be developed

  10. Fluoride metabolism in Acacia georginae Gidyea

    PubMed Central

    Peters, R. A.; Murray, L. R.; Shorthouse, M.

    1965-01-01

    1. The metabolism of fluoride in seedlings and small plants of Acacia georginae has been studied with the idea of finding the conditions under which the plant makes fluoroacetate in the laboratory. 2. Individual seedlings vary in the extent to which they take up fluoride and convert it into a form other than inorganic which is here called `organic' fluoride, F(org.). The differences between the toxicity of A. georginae Gidyea trees may therefore be genetic in origin. 3. The uptake of fluoride from solutions 0·525–1·05mm (10–20p.p.m.) was not large. In 1–4 days it reached 8 p.p.m. in the aerial parts and 16 p.p.m. in the roots. Unlike the distribution of the halogen in grass, total fluoride was greater than inorganic fluoride. It was almost a rule that more `organic' fluoride was present in the roots than in the aerial parts. 4. With higher concentrations of fluoride 10·5–15·75mm (200–300p.p.m.) much larger amounts of fluoride were taken up, especially by the roots, and much more apparent organic fluoride was formed. 5. pH had a large influence upon the intake, this being lowest at an initial pH8·4 and highest at pH4·0. The pH outside this range was not investigated. Some observations have been made with a view to clarifying the biochemical paths for the synthesis of the C–F bond. 6. There is no evidence that chloride is an intermediary in synthesis. 7. Succinate is not accumulated in fluoride-stressed plants, suggesting that succinate dehydrogenase is not inhibited. 8. Enolase does not appear to be inhibited in vivo. PMID:14342508

  11. Fluoride concentration in dentin of exfoliated primary teeth as a biomarker for cumulative fluoride exposure.

    PubMed

    dela Cruz, G G; Rozier, R G; Bawden, J W

    2008-01-01

    A biomarker for lifetime fluoride exposure would facilitate population-based research and policy making but currently does not exist. This study examined the suitability of primary tooth dentin as a biomarker by comparing dentin fluoride concentration and fluoride exposures. Ninety-nine children's exfoliated primary teeth were collected from 2 fluoridated and 2 fluoride-deficient communities in North Carolina. Coronal dentin was isolated by microdissection and fluoride concentration assayed using the microdiffusion, ion-specific electrode technique. Information on children's fluoride exposures since birth from drinking water, toothpaste, supplements, rinses, food and beverages was collected by a self-reported questionnaire administered to caregivers. Only a small portion of the variance (10%) in incisor dentin fluoride (mean 792, SD 402 mg/kg) was accounted for by the best linear regression model as evaluated by the adjusted R(2). A moderate portion of the variance (60%) of molar dentin fluoride (mean 768, SD 489 mg/kg) was predicted by dietary fluoride supplement exposures, community of residence, and frequent tea consumption. Results for molars suggest that primary tooth dentin concentration may prove to be a satisfactory biomarker for fluoride exposure. PMID:18832828

  12. Fluoride Concentration in Dentin of Exfoliated Primary Teeth as a Biomarker for Cumulative Fluoride Exposure

    PubMed Central

    dela Cruz, G.G.; Rozier, R.G.; Bawden, J.W.

    2008-01-01

    A biomarker for lifetime fluoride exposure would facilitate population-based research and policy making but currently does not exist. This study examined the suitability of primary tooth dentin as a biomarker by comparing dentin fluoride concentration and fluoride exposures. Ninety-nine children's exfoliated primary teeth were collected from 2 fluoridated and 2 fluoride-deficient communities in North Carolina. Coronal dentin was isolated by microdissection and fluoride concentration assayed using the microdiffusion, ion-specific electrode technique. Information on children's fluoride exposures since birth from drinking water, toothpaste, supplements, rinses, food and beverages was collected by a self-reported questionnaire administered to caregivers. Only a small portion of the variance (10%) in incisor dentin fluoride (mean 792, SD 402 mg/kg) was accounted for by the best linear regression model as evaluated by the adjusted R2. A moderate portion of the variance (60%) of molar dentin fluoride (mean 768, SD 489 mg/kg) was predicted by dietary fluoride supplement exposures, community of residence, and frequent tea consumption. Results for molars suggest that primary tooth dentin concentration may prove to be a satisfactory biomarker for fluoride exposure. PMID:18832828

  13. Discovery of Interstellar Hydrogen Fluoride

    NASA Technical Reports Server (NTRS)

    Neufeld, David A.; Zmuidzinas, Jonas; Schilke, Peter; Phillips, Thomas G.

    1997-01-01

    We report the first detection of interstellar hydrogen fluoride. Using the Long Wavelength Spectrometer of the Infrared Space Observatory (ISO), we have detected the 121.6973 micron J = 2-1 line of HF in absorption toward the far-infrared continuum source Sagittarius B2. The detection is statistically significant at the 13 sigma level. On the basis of our model for the excitation of HF in Sgr B2, the observed line equivalent width of 1.0 nm implies a hydrogen fluoride abundance of about 3 x 10 (exp -10) relative to H, If the elemental abundance of fluorine in Sgr B2 is the same as that in the solar system, then HF accounts for about 2% of the total number of fluorine nuclei. We expect hydrogen fluoride to be the dominant reservoir of gas-phase fluorine in Sgr B2, because it is formed rapidly in exothermic reactions of atomic fluorine with either water or molecular hydrogen; thus, the measured HF abundance suggests a substantial depletion of fluorine onto dust grains. Similar conclusions regarding depletion have previously been reached for the case of chlorine in dense interstellar clouds. We also find evidence at a lower level of statistical significance (about 5 sigma) for an emission feature at the expected position of the 4(sub 32)-4(sub 23) 121.7219 micron line of water. The emission-line equivalent width of 0.5 mm for the water feature is consistent with the water abundance of 5 x 10(exp -6) relative to H, that has been inferred previously from observations of the hot core of Sgr B2.

  14. Discovery of Interstellar Hydrogen Fluoride

    NASA Technical Reports Server (NTRS)

    Neufeld, David A.; Zmuidzinas, Jonas; Schilke, Peter; Phillips, Thomas G.

    1997-01-01

    We report the first detection of interstellar hydrogen fluoride. Using the Long Wavelength Spectrometer of the Infrared Space Observatory (ISO), we have detected the 121.6973 micron J = 2-1 line of HF in absorption toward the far-infrared continuum source Sagittarius B2. The detection is statistically significant at the 13 sigma level. On the basis of our model for the excitation of HF in Sgr B2, the observed line equivalent width of 1.0 nm implies a hydrogen fluoride abundance of approximately 3 x 10(exp -10) relative to H2. If the elemental abundance of fluorine in Sgr B2 is the same as that in the solar system, then HF accounts for approximately 2% of the total number of fluorine nuclei. We expect hydrogen fluoride to be the dominant reservoir of gas-phase fluorine in Sgr B2, because it is formed rapidly in exothermic reactions of atomic fluorine with either water or molecular hydrogen; thus, the measured HF abundance suggests a substantial depletion of fluorine onto dust grains. Similar conclusions regarding depletion have previously been reached for the case of chlorine in dense interstellar clouds. We also find evidence at a lower level of statistical significance (approximately 5 sigma) for an emission feature at the expected position of the 4(sub 32)-4(sub 23) 121.7219 micron line of water. The emission-line equivalent width of 0.5 nm for the water feature is consistent with the water abundance of 5 x 10(exp -6) relative to H2 that has been inferred previously from observations of the hot core of Sgr B2.

  15. Welsh water should reinstate fluoridation on Anglesey.

    PubMed

    Hulse, G; Kenrick, A; Thomas, C H; Thomas, A; Davies, D J; Lennon, M A

    1995-01-21

    In 1992, Welsh Water withdrew the successful water fluoridation scheme on Anglesey. Despite evidence of the benefits of water fluoridation and the rise in number of children with tooth decay since the scheme's withdrawal, Welsh Water is still not prepared to re-establish the scheme. PMID:7848746

  16. Method of making porous ceramic fluoride

    DOEpatents

    Reiner, Robert H.; Holcombe, Cressie E.

    1990-01-01

    A process for making a porous ceramic composite where fumed silica particles are coated with a nitrate, preferably aluminum nitrate. Next the nitrate is converted to an oxide and formed into a desired configuration. This configuration is heated to convert the oxide to an oxide silicate which is then react with HF, resulting in the fluoride ceramic, preferably aluminum fluoride.

  17. Growth of hollow nickel fluoride whiskers

    SciTech Connect

    Petrov, S. V.; Orekhov, Yu. F.; Fedorov, P. P.

    2009-07-15

    Hollow nickel fluoride whiskers have been obtained by condensation from the vapor phase onto a platinum substrate in a flow of hydrogen fluoride. Crystals up to 5 mm in length have a square cross section with a 300 {+-} 30-{mu}m side. The wall thickness is 85 {+-} 20 {mu}m.

  18. Xenon fluoride solutions effective as fluorinating agents

    NASA Technical Reports Server (NTRS)

    Hyman, H. H.; Quarterman, L. A.; Sheft, I.

    1967-01-01

    Solutions of xenon fluorides in anhydrous hydrogen fluoride have few disruptive effects and leave a residue consisting of gaseous xenon, which can be recovered and refluorinated. This mild agent can be used with materials which normally must be fluorinated with fluorine alone at high temperatures.

  19. Photoelastic properties of magnesium fluoride

    SciTech Connect

    Chung, S.; Carleton, H.R.

    1980-05-01

    Magnesium fluoride (MgF/sub 2/) has the rutile crystal structure with a tetragonal space lattice (P4/mnm). The crystal is uniaxial positive with n/sub omega/ = 1.378 and n/sub epsilon/ = 1.390 for sodium D light. A single crystal of MgF/sub 2/ grown by the Materials Research Corporation was used in this study. The crystal was approximately 1 cm/sup 3/ with polished faces in the (001), (110), and (anti 110) crystal planes as verified by the back-reflection Laue method. Sample preparations and measurements are described.

  20. Thermodynamic data for uranium fluorides

    SciTech Connect

    Leitnaker, J.M.

    1983-03-01

    Self-consistent thermodynamic data have been tabulated for uranium fluorides between UF/sub 4/ and UF/sub 6/, including UF/sub 4/ (solid and gas), U/sub 4/F/sub 17/ (solid), U/sub 2/F/sub 9/ (solid), UF/sub 5/ (solid and gas), U/sub 2/F/sub 10/ (gas), and UF/sub 6/ (solid, liquid, and gas). Included are thermal function - the heat capacity, enthalpy, and free energy function, heats of formation, and vaporization behavior.

  1. Manufacture and properties of fluoride cement

    NASA Astrophysics Data System (ADS)

    Malata-Chirwa, Charles David

    This research work aimed at characterising composition, hydration and physical properties of fluoride cement, by studying samples of the cement obtained from Malawi, and comparing them to ordinary Portland cement. By confirming the suitable characteristics of fluoride cement through this work, the results of the research work provide a good basis for the wider adoption of fluoride cement as an alternative to ordinary Portland cement, especially in developing economies. Numerous accounts have been cited regarding the production and use of fluoride cement. Since there have not been conclusive agreement as to its properties, this study was limited to the theories of successful incorporation of fluoride compounds in the manufacture of fluoride cement. Hence, the properties and characteristics reported in this study relate to the cement currently manufactured in Malawi, and, on a comparative basis only, to that manufactured in other parts of the world. Samples of the fluoride cement used in the study were obtained by synthetic manufacture of the cement using common raw materials for the manufacture of fluoride cement that is limestone, silica sand, and fluorspar. These samples were subjected to several comparative tests used to characterise cements including examination under x-ray diffractometer, scanning electron microscopy and tests for setting time and compressive strength. Under similar laboratory conditions, it was possible to prove that fluoride cement hardens more rapidly than ordinary Portland cement. Also observed during the experimental work is that fluoride cement develops higher compressive strengths than ordinary Portland cement. The hardening and setting times are significantly different between the two cements. Also the nature of the hydration products, that is the microstructural development is significantly different in the two cements. The differences brought about between the two cements are because of the presence of fluorine during the clinkering

  2. Method of treating fluoride contaminated wastes

    SciTech Connect

    Davis, P.K.; Kakaria, V.K.

    1988-04-05

    A method for treating spent aluminum smelting potliner material containing fluoride contaminants is described which comprises: adding silica to the material to form a mixture thereof; elevating the temperature of the mixture within the range of 1,000/sup 0/ to 1,700/sup 0/C. to form a slag; providing sufficient silica in the mixture and forming the slag in the presence of sufficient water for pyrohydrolysis conditions resulting in the volatilization of substantially all of the fluoride contaminants mostly in the form of hydrogen fluoride; and cooling the slag remaining after volatilizatiion of substantially all of the fluoride contaminants to produce an insoluble silicate glass-residue containing any remaining portion of the fluoride contaminants in an immobile state.

  3. Recent advancements in fluoride: A systematic review

    PubMed Central

    Bansal, Ankita; Ingle, Navin Anand; Kaur, Navpreet; Ingle, Ekta

    2015-01-01

    To review advancements of fluoride in dentistry, a search of 21 electronic databases and World Wide Web was conducted. Relevant journals were hand searched and further information was requested from authors. Inclusion criteria were a predefined hierarchy of evidence and objectives. Study validity was assessed with checklists. Two reviewers independently screened sources, extracted data, and assessed validity. Fluoride has become an important tool in preventive dentistry. Current research is focused on the development of strategies to improve fluoride efficacy. Fluoride therapy in the form of varnish, gel, mouth rinse, or toothpaste has been used extensively as a caries-preventive intervention for over three decades. The purpose of this review is to inform the reader about new research related to the use of fluoride for the prevention of dental caries. PMID:26539383

  4. The structure of trimethyltin fluoride.

    PubMed

    Chaudhary, Praveen; Bieringer, Mario; Hazendonk, Paul; Gerken, Michael

    2015-12-01

    The solid-state structure of (CH3)3SnF was reinvestigated by X-ray diffraction techniques as well as by multi-nuclear solid-state NMR spectroscopy. Trimethyltin fluoride crystallizes from hot ethanol in the orthorhombic space group Pnma at room temperature and changes to a low-temperature orthorhombic phase (space group: Cmcm) below -70 °C. In both modifications, trimethyltin fluoride adopts a linear chain structure with symmetric fluorine bridges, in contrast to previous reports. During its synthesis, (CH3)3SnF precipitates in another, poorly crystalline modification, as shown by powder X-ray diffraction. Solid-state MAS NMR experiments of both room-temperature phases of (CH3)3SnF (non-recrystallized and recrystallized) were carried out for the (1)H, (13)C, (19)F, and (119)Sn nuclei. The (119)Sn{(19)F, (1)H} and (19)F{(1)H} NMR spectra offer unambiguous determination for the (19)F and (119)Sn shielding tensors. The (119)Sn{(1)H} solid-state NMR spectra are in agreement with pentacoordination of Sn in this compound for the non-recrystallized and the recrystallized modifications. Based on the solid-state NMR results, the non-recrystallized modification of (CH3)3SnF also consists of linear, symmetrically fluorine-bridged chains, and differs from the recrystallized orthorhombic phase only in packing of the chains. PMID:26300008

  5. Dental fluorosis and skeletal fluoride content as biomarkers of excess fluoride exposure in marsupials.

    PubMed

    Death, Clare; Coulson, Graeme; Kierdorf, Uwe; Kierdorf, Horst; Morris, William K; Hufschmid, Jasmin

    2015-11-15

    Particulate and gaseous fluoride emissions contaminate vegetation near fluoride-emitting industries, potentially impacting herbivorous wildlife in neighboring areas. Dental fluorosis has been associated with consumption of fluoride-contaminated foliage by juvenile livestock and wildlife in Europe and North America. For the first time, we explored the epidemiology and comparative pathology of dental fluorosis in Australian marsupials residing near an aluminium smelter. Six species (Macropus giganteus, Macropus rufogriseus, Wallabia bicolor, Phascolarctos cinereus, Trichosurus vulpecula, Pseudocheirus peregrinus) demonstrated significantly higher bone fluoride levels in the high (n=161 individuals), compared to the low (n=67 individuals), fluoride areas (p<0.001). Necropsy examinations of all six species from the high-fluoride area near the smelter revealed dental lesions considered characteristic of dental fluorosis in eutherian mammals. Within the high-fluoride area, 67% of individuals across the six species showed dental enamel lesions, compared to 3% in the low-fluoride areas. Molars that erupted before weaning were significantly less likely to display pathological lesions than those developing later, and molars in the posterior portion of the dental arcade were more severely fluorotic than anterior molars in all six species. The severity of dental lesions was positively associated with increasing bone fluoride levels in all species, revealing a potential biomarker of excess fluoride exposure. PMID:26188404

  6. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  7. Fluoridation and Defluoridation. Training Module 2.230.2.77.

    ERIC Educational Resources Information Center

    McMullen, L. D.

    This document is an instructional module package prepared in objective form for use by an instructor familiar with fluoridation and fluoride feeding equipment. Enclosed are objectives, an instructor guide, student handouts and transparency masters. The module considers the principles and purposes of fluoridation, methods of feeding fluoride,…

  8. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  9. Fluoride Programs in the School Setting: Preventive Dental Health.

    ERIC Educational Resources Information Center

    Rebich, Theodore, Jr.; And Others

    1982-01-01

    Two types of school-based programs that increase students' use of fluoride for preventive dental health are described. In fluoride mouthrinse programs, teachers give their students a fluoride solution once a week in a paper cup. In areas where the level of fluoride in the water supply is insufficient, the flouride tablet program is used. (JN)

  10. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  11. Fluoride Plus Functionalized β-TCP

    PubMed Central

    Karlinsey, R.L.; Pfarrer, A.M.

    2012-01-01

    With more than 50 years of clinical success, fluoride serves as the gold standard agent for preventing tooth decay. In particular, the action of fluoride facilitates saliva-driven remineralization of demineralized enamel and alters solubility beneficially. Still, tooth decay remains problematic, and one way to address it may be through the development of new mineralizing agents. Laboratory and clinical studies have demonstrated that the combination of fluoride and functionalized β-tricalcium phosphate (fTCP) produces stronger, more acid-resistant mineral relative to fluoride, native β-TCP, or fTCP alone. In contrast to other calcium-based approaches that seem to rely on high levels of calcium and phosphate to drive remineralization, fTCP is a low-dose system designed to fit within existing topical fluoride preparations. The functionalization of β-TCP with organic and/or inorganic molecules provides a barrier that prevents premature fluoride-calcium interactions and aids in mineralization when applied via common preparations and procedures. While additional clinical studies are warranted, supplementing with fTCP to enhance fluoride-based nucleation activity, with subsequent remineralization driven by dietary and salivary calcium and phosphate, appears to be a promising approach. PMID:22899679

  12. Current status of fluoride volatility method development

    SciTech Connect

    Uhlir, J.; Marecek, M.; Skarohlid, J.

    2013-07-01

    The Fluoride Volatility Method is based on a separation process, which comes out from the specific property of uranium, neptunium and plutonium to form volatile hexafluorides whereas most of fission products (mainly lanthanides) and higher transplutonium elements (americium, curium) present in irradiated fuel form nonvolatile tri-fluorides. Fluoride Volatility Method itself is based on direct fluorination of the spent fuel, but before the fluorination step, the removal of cladding material and subsequent transformation of the fuel into a powdered form with a suitable grain size have to be done. The fluorination is made with fluorine gas in a flame fluorination reactor, where the volatile fluorides (mostly UF{sub 6}) are separated from the non-volatile ones (trivalent minor actinides and majority of fission products). The subsequent operations necessary for partitioning of volatile fluorides are the condensation and evaporation of volatile fluorides, the thermal decomposition of PuF{sub 6} and the finally distillation and sorption used for the purification of uranium product. The Fluoride Volatility Method is considered to be a promising advanced pyrochemical reprocessing technology, which can mainly be used for the reprocessing of oxide spent fuels coming from future GEN IV fast reactors.

  13. Deposition of fluoride on enamel surfaces released from varnishes is limited to vicinity of fluoridation site

    PubMed Central

    Lennon, A. M.; Yakin, M.; Becker, K.; Buchalla, W.; Attin, R.; Wiegand, A.

    2006-01-01

    The aim of the in-situ study was to determine fluoride uptake in non-fluoridated, demineralized enamel after application of fluoride varnishes on enamel samples located at various distances from the non-fluoridated samples. All enamel samples used were demineralized with acidic hydroxyethylcellulose before the experiment. Intra-oral appliances were worn by ten volunteers in three series: (1, Mirafluorid, 0.15% F; 2, Duraphat, 2.3% F and 3, unfluoridated controls) of 6 days each. Each two enamel samples were prepared from 30 bovine incisors. One sample was used for the determination of baseline fluoride content (BFC); the other was treated according to the respective series and fixed in the intra-oral appliance for 6 days. Additionally, from 120 incisors, each four enamel samples were prepared (one for BFC). Three samples (a–c) were placed into each appliance at different sites: (a) directly neighboured to the fluoridated specimen (=next), (b) at 1-cm distance (=1 cm) and (c) in the opposite buccal aspect of the appliance (=opposite). At these sites, new unfluoridated samples were placed at days 1, 3 and 5, which were left in place for 1 day. The volunteers brushed their teeth and the samples with fluoridated toothpaste twice per day. Both the KOH-soluble and structurally bound fluoride were determined in all samples to determine fluoride uptake and were statistically analyzed. One day, after fluoridation with Duraphat, KOH-soluble fluoride uptake in specimen a (=next) was significantly higher compared to the corresponding samples of both the control and Mirafluorid series, which in turn were not significantly different from each other. At all other sites and time points, fluoride uptake in the enamel samples were not different from controls for both fluoride varnishes. Within the first day after application, intra-oral-fluoride release from the tested fluoride varnish Duraphat leads to KOH-soluble fluoride uptake only in enamel samples located in close

  14. Physiologic Conditions Affect Toxicity of Ingested Industrial Fluoride

    PubMed Central

    Sauerheber, Richard

    2013-01-01

    The effects of calcium ion and broad pH ranges on free fluoride ion aqueous concentrations were measured directly and computed theoretically. Solubility calculations indicate that blood fluoride concentrations that occur in lethal poisonings would decrease calcium below prevailing levels. Acute lethal poisoning and also many of the chronic effects of fluoride involve alterations in the chemical activity of calcium by the fluoride ion. Natural calcium fluoride with low solubility and toxicity from ingestion is distinct from fully soluble toxic industrial fluorides. The toxicity of fluoride is determined by environmental conditions and the positive cations present. At a pH typical of gastric juice, fluoride is largely protonated as hydrofluoric acid HF. Industrial fluoride ingested from treated water enters saliva at levels too low to affect dental caries. Blood levels during lifelong consumption can harm heart, bone, brain, and even developing teeth enamel. The widespread policy known as water fluoridation is discussed in light of these findings. PMID:23840230

  15. PROCESS FOR TREATING VOLATILE METAL FLUORIDES

    DOEpatents

    Rudge, A.J.; Lowe, A.J.

    1957-10-01

    This patent relates to the purification of uranium hexafluoride, made by reacting the metal or its tetrafluoride with fluorine, from the frequently contained traces of hydrofluoric acid. According to the present process, UF/sub 6/ containing as an impurity a small amount of hydrofluoric acid, is treated to remove such impurity by contact with an anhydrous alkali metal fluoride such as sodium fluoride. In this way a non-volatile complex containing hydrofluoric acid and the alkali metal fluoride is formed, and the volatile UF /sub 6/ may then be removed by distillation.

  16. Containerless processing of fluoride glass

    NASA Technical Reports Server (NTRS)

    Doremus, Robert H.

    1990-01-01

    Ground-based experiments on glass formation, crystallization, surface tension, vaporization, and chemical durability of a zirconium-barium-lanthanum (ZBL) fluoride glass are summarized. In a container large, columnar grains grew out from the container-glass interface during cooling. The main crystalline phase was alpha BaZrF6. A ZBL glass sphere was levitated acoustically during Shuttle flight STS-11. The glass was melted and then cooled while being levitated (containerless). Crystallization in the recovered sample was very fine and mainly beta BaZr2F10, showing the influence of the container on the nucleation and microstructure of crystallization in the glass. Glass formation should be easier for a containerless glass than in a container.

  17. REDUCTION OF FLUORIDE TO METAL

    DOEpatents

    Carlson, O.N.; Schmidt, F.A.; Spedding, F.H.

    1960-08-30

    A process is given for making yttrium metal by reducing yttrium fluoride with calcium plus magnesium. Calcium is added in an excess of from 10 to 20% and magnesium in a quantity to yield a magnesium--yttrium alloy containing from 12 to 25% magnesium when the reaction mass is heated in an inert atmosphere at from 900 to 1106 deg C, but preferably above the melting point of the alloy. Calcium chloride may be added so as to obtain a less viscous slag containing from 30 to 60% calcium chloride. After removal of the slag the alloy is vacuum-heated at about 1100 deg C for volatilization of the magnesium and calcium.

  18. Daily Fluoride Intake from Iranian Green Tea: Evaluation of Various Flavorings on Fluoride Release

    PubMed Central

    Maleki, Afshin; Daraei, Hiua; Mohammadi, Elham; Zandi, Shiva; Teymouri, Pari; Mahvi, Amir Hossien; Gharibi, Fardin

    2016-01-01

    With increased awareness of the health benefits of the compounds in green tea, especially polyphenols, its consumption is rising. The main purpose of this study is to determine the effect of different additives on the released fluoride into tea liquor and also daily fluoride intake. The concentrations of fluoride, nitrate, sulfate, and chloride were measured in 15 different flavored green teas (Refah-Lahijan). The fluoride and other anion concentrations were measured by ion chromatography method. The data were analyzed with Statistical Package for the Social Sciences version 16.0. The results showed that the minimum and maximum concentrations of fluoride in the green tea infusions were 0.162 mg/L (cinnamon-flavored green tea) and 3.29 mg/L (bagged peach-flavored green tea), respectively. The mean concentration of fluoride in the green tea leaves was 52 mg/kg, and approximately 89% of the fluoride was released from the green tea leaves into the infusions after brewing. The fluoride concentrations varied significantly among the examined green teas (P < 0.05). However, the additives had no significant effect on the fluoride release into the infusions (P > 0.05). Finally, drinking of the studied green teas cannot make a significant contribution to the daily dietary intake of F for consumers. PMID:27042093

  19. Daily Fluoride Intake from Iranian Green Tea: Evaluation of Various Flavorings on Fluoride Release.

    PubMed

    Maleki, Afshin; Daraei, Hiua; Mohammadi, Elham; Zandi, Shiva; Teymouri, Pari; Mahvi, Amir Hossien; Gharibi, Fardin

    2016-01-01

    With increased awareness of the health benefits of the compounds in green tea, especially polyphenols, its consumption is rising. The main purpose of this study is to determine the effect of different additives on the released fluoride into tea liquor and also daily fluoride intake. The concentrations of fluoride, nitrate, sulfate, and chloride were measured in 15 different flavored green teas (Refah-Lahijan). The fluoride and other anion concentrations were measured by ion chromatography method. The data were analyzed with Statistical Package for the Social Sciences version 16.0. The results showed that the minimum and maximum concentrations of fluoride in the green tea infusions were 0.162 mg/L (cinnamon-flavored green tea) and 3.29 mg/L (bagged peach-flavored green tea), respectively. The mean concentration of fluoride in the green tea leaves was 52 mg/kg, and approximately 89% of the fluoride was released from the green tea leaves into the infusions after brewing. The fluoride concentrations varied significantly among the examined green teas (P < 0.05). However, the additives had no significant effect on the fluoride release into the infusions (P > 0.05). Finally, drinking of the studied green teas cannot make a significant contribution to the daily dietary intake of F for consumers. PMID:27042093

  20. Effects of treatment with sodium fluoride and subsequent starvation on fluoride content of earthworms

    SciTech Connect

    Walton, K.C.

    1987-01-01

    The two experiments described here originated during a long-term investigation into the occurrence and movement of pollutant fluoride in a terrestrial ecosystem. Moles (Talpa europaea) whose diet consist largely of various species of earthworm Lumbricidae, are one of the species under investigation. Bone fluoride in moles was found to be higher, on average, than in foxes or small rodents. Moles probably acquire fluoride from their earthworm diet. Earthworms do not have any readily identifiable tissue in which to store large amounts of fluoride but, for their size, they have a considerable amount of soil in their gut, up oto 20% of their dry weight. Preliminary measurements of fluoride in whole earthworms suggested that observed levels could probably be accounted for by fluoride bound in the mineral part of contained soil and released during preparatory ashing. Two experiments to investigate this situation are described; here their aims were: to expose earthworms kept in soil to different concentrations of sodium fluoride; to measure resulting fluoride in earthworms when soil was removed from their gut by starvation for varying periods of time; and to compare amounts of fluoride in whole starved earthworms with those in starved earthworms from which remaining soil had also been physically removed by dissection and washing.

  1. Materials corrosion in molten lithium fluoride-sodium fluoride-potassium fluoride eutectic salt

    NASA Astrophysics Data System (ADS)

    Olson, Luke Christopher

    Static corrosion studies were undertaken to determine the compatibility of several candidate high temperature materials for a heat transfer loop in a molten alkali fluoride eutectic salt, LiF-NaF-KF: 46.5-11.5-42 mol % (commonly referred to as FLiNaK), as well as a molten chloride near eutectic salt, KCl-MgCl2: 68-32 mol %. Several high temperature alloys: Hastelloy-N, Hastelloy-X, Haynes-230, Inconel-617, and Incoloy-800H, Nb-1Zr, a nearly pure Ni alloy Ni-201, and a C/SiSiC ceramic were exposed to molten FLiNaK at 850°C for 500 h in sealed graphite crucibles under an argon cover gas. Corrosion occurred predominantly from dealloying of Cr from the Cr bearing alloys, an effect that was particularly pronounced at the grain boundaries. Corrosion was noted to occur from selective attack of the Si phase in the C/SiSiC ceramic. Alloy weight-loss/area due to molten fluoride salt exposure correlated with the initial Cr-content of the alloys, and was consistent with the Cr-content measured in the salts after corrosion tests. The alloys' weight-loss/area was also found to correlate to the concentration of carbon present in the nominally 20% Cr containing alloys, due to the formation of chromium carbide phases at the grain boundaries. The corrosion mechanisms for the chloride based salt were found to be similar to those observed in FLiNaK, but the chemical attack was found to be less aggressive. Sulfamate Ni electroplating and Mo plasma spraying of Fe-Ni-Cr alloy coupons was investigated to mitigate Cr dissolution. A chemical vapor deposited pyrolytic carbon and SiC coating was also investigated to protect the C/SiSiC composites. Results indicate that Ni-plating has the potential to provide protection against alloy corrosion in molten fluoride salts. Furthermore, the presence of a chromium-oxide interlayer at the interface of the Ni-plating and alloy substrate can further improve the efficacy of the Ni-plating. The pyrolytic carbon and SiC coating on the C/SiSiC composites

  2. Shock Induced Birefringence in Lithium Fluoride

    SciTech Connect

    Holmes, N C

    2001-06-01

    We have used an ellipsometer to measure the birefringence of lithium fluoride in shock compression experiments. In previous x-ray diffraction experiments, single crystal [100] LiF has been reported to remain cubic at moderate pressures.

  3. AES analysis of barium fluoride thin films

    NASA Astrophysics Data System (ADS)

    Kashin, G. N.; Makhnjuk, V. I.; Rumjantseva, S. M.; Shchekochihin, Ju. M.

    1993-06-01

    AES analysis of thin films of metal fluorides is a difficult problem due to charging and decomposition of such films under electron bombardment. We have developed a simple algorithm for a reliable quantitative AES analysis of metal fluoride thin films (BaF 2 in our work). The relative AES sensitivity factors for barium and fluorine were determined from BaF 2 single-crystal samples. We have investigated the dependence of composition and stability of barium fluoride films on the substrate temperature during film growth. We found that the instability of BaF 2 films grown on GaAs substrates at high temperatures (> 525°C) is due to a loss of fluorine. Our results show that, under the optimal electron exposure conditions, AES can be used for a quantitative analysis of metal fluoride thin films.

  4. Materials processing apparatus development for fluoride glass

    NASA Technical Reports Server (NTRS)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  5. Well waters fluoride in Enugu, Nigeria.

    PubMed

    Ogbu, I Si; Okoro, O Io; Ugwuja, E I

    2012-04-01

    Abnormal fluoride levels in drinking water have been associated with adverse health effects. To determine the fluoride content of well waters in Enugu, southeastern Nigeria, water samples from 50 artisan wells chosen by multistage sampling procedure from the 5 zones of Enugu municipality were analyzed in duplicates for their fluoride content. The zonal mean values were 0.60, 0.70, 0.62, 0.62, and 0.63 mg/L for Abakpa Nike, Achara Layout, Obiagu/ Ogui, Trans Ekulu and Uwani, respectively (p<0.05). The mean value for the whole city was 0.63 mg/L. Although, the mean level of fluoride recorded in this study is currently within safe limits (1.5 mg/L, WHO 2011), it is important to monitor continuously the fluoride content of well waters in the municipality in view of the increasing industrial activities going on in the city and heavy reliance on well water for domestic purposes and the widespread use of consumer products containing fluoride. PMID:23022857

  6. Debating Water Fluoridation Before Dr. Strangelove.

    PubMed

    Carstairs, Catherine

    2015-08-01

    In the 1930s, scientists learned that small amounts of fluoride naturally occurring in water could protect teeth from decay, and the idea of artificially adding fluoride to public water supplies to achieve the same effect arose. In the 1940s and early 1950s, a number of studies were completed to determine whether fluoride could have harmful effects. The research suggested that the possibility of harm was small. In the early 1950s, Canadian and US medical, dental, and public health bodies all endorsed water fluoridation. I argue in this article that some early concerns about the toxicity of fluoride were put aside as evidence regarding the effectiveness and safety of water fluoridation mounted and as the opposition was taken over by people with little standing in the scientific, medical, and dental communities. The sense of optimism that infused postwar science and the desire of dentists to have a magic bullet that could wipe out tooth decay also affected the scientific debate. PMID:26066938

  7. Delivery Challenges for Fluoride, Chlorhexidine and Xylitol

    PubMed Central

    Featherstone, John DB

    2006-01-01

    The progression or reversal of dental caries is determined by the balance between pathological and protective factors. It is well established that a) fluoride inhibits demineralization and enhances remineralization, b) chlorhexidine reduces the cariogenic bacterial challenge, and c) xylitol is non-cariogenic and has antibacterial properties. The challenge that we face is how best to deliver these anti-caries entities at true therapeutic levels, over time, to favorably tip the caries balance. High caries risk people, including children with Early Childhood Caries (ECC), are a special challenge, since high cariogenic bacterial activity can override fluoride therapy. Current fluoride and chlorhexidine varnishes deliver all their activity within about 24 hours. Early studies with experimental slow release fluoride devices retained elevated levels of fluoride for months in a therapeutic range but have not been pursued. Preventive dentistry has largely ignored the benefits of reducing the bacterial challenge, partially due to primitive and inadequate delivery systems. For example, Chlorhexidine applied as a rinse partially reduces some bacteria but not others that are hiding within the biofilm. Better antibacterials and better delivery systems are needed. Xylitol delivered by gum or lozenge appears to be effective clinically in reducing cariogenic bacteria and caries levels, but novel systems that deliver therapeutic amounts when needed would be a major advance, especially for young children. Reducing the cariogenic bacterial challenge and enhancing the effect of fluoride by the use of new sustained-delivery systems would have a major effect on dealing with caries as a disease. PMID:16934125

  8. Isothermal vapor-liquid equilibria for the systems 1-chloro-1,1-difluoroethane + hydrogen fluoride, 1,1-dichloro-1-fluoroethane + hydrogen fluoride, and chlorodifluoromethane + hydrogen fluoride

    SciTech Connect

    Kang, Y.W.; Lee, Y.Y.

    1997-03-01

    Isothermal vapor-liquid equilibria for the three binary systems (1-chloro-1,1-difluoroethane + hydrogen fluoride, 1,1-dichloro-1-fluoroethane + hydrogen fluoride, and chlorodifluoromethane + hydrogen fluoride) have been measured. The experimental data for the binary systems are correlated with the NRTL equation with the vapor-phase association model for the mixtures containing hydrogen fluoride, and the relevant parameters are presented. All of the systems form minimum boiling heterogeneous azeotropes.

  9. Influence of Individual Saliva Secretion on Fluoride Bioavailability

    PubMed Central

    Naumova, E.A; Gaengler, P; Zimmer, S; Arnold, W.H

    2010-01-01

    The aim of this preliminary investigation was to compare the individual saliva secretion rate with the fluoride bioavailability in saliva after using sodium fluoride and amine fluoride. Methods: To assess oral fluoride kinetics 10 highly trained volunteers brushed their teeth with one of the formulations and saliva was collected. The amount of saliva was measured, and the fluoride content was determined. Data underwent statistical analysis using the Mann-Whitney-U test and Pearson correlation. The ex vivo experiment I included individual saliva collection of the same volunteers. Then the oral hygiene products were solved in equal amounts of whole saliva (ex-vivo experiment II), and the fluoride content was measured. Finally, both products were dispersed in distilled water (ex-vivo experiment III) to calculate the dissociation of both products in water. Results: In vivo results of fluoride content after 3 min. tooth brushing demonstrated a negative correlation with saliva secretion: for NaF r = -0.695 (p<0.01) and for amine fluoride r = -0.446 (p<0.01). The in-vitro experiment I resulted for NaF in 251.7±22.4 µg/g fluoride and for amine fluoride in 171.7±14.4 µg/g. Conclusions: Fluoride bioavailability of saliva after exposure to NaF was higher compared to amine fluoride. The individual secretion rate changes the fluoride content and normal secretors keep the fluoride availability longer. PMID:21221176

  10. The effective use of fluorides in public health.

    PubMed Central

    Jones, Sheila; Burt, Brian A.; Petersen, Poul Erik; Lennon, Michael A.

    2005-01-01

    Dental caries remain a public health problem for many developing countries and for underprivileged populations in developed countries. This paper outlines the historical development of public health approaches to the use of fluoride and comments on their effectiveness. Early research and development was concerned with waterborne fluorides, both naturally occurring and added, and their effects on the prevalence and incidence of dental caries and dental fluorosis. In the latter half of the 20th century, the focus of research was on fluoride toothpastes and mouth rinses. More recently, systematic reviews summarizing these extensive databases have indicated that water fluoridation and fluoride toothpastes both substantially reduce the prevalence and incidence of dental caries. We present four case studies that illustrate the use of fluoride in modern public health practice, focusing on: recent water fluoridation schemes in California, USA; salt fluoridation in Jamaica; milk fluoridation in Chile; and the development of "affordable" fluoride toothpastes in Indonesia. Common themes are the concern to reduce demands for compliance with fluoride regimes that rely upon action by individuals and their families, and the issue of cost. We recommend that a community should use no more than one systemic fluoride (i.e. water or salt or milk fluoridation) combined with the use of fluoride toothpastes, and that the prevalence of dental fluorosis should be monitored in order to detect increases in or higher-than-acceptable levels. PMID:16211158

  11. Analysis of 1-Minute Potentially Available Fluoride from Dentifrice

    PubMed Central

    Carey, Clifton M; Holahan, Erin C; Schmuck, Burton D

    2014-01-01

    Previous reports found that some fluoride-containing dentifrices do not release effective concentrations of fluoride during brushing. Failure to release fluoride can be due to dentifrice matrix components that interfere with the solubilization of the fluoride salts during brushing. A new generation of dentifrices has the capability to precipitate beneficial fluoride salts during tooth brushing. Therefore, a method that assesses the potentially available fluoride during the 1-minute brushing is needed. A new filter-paper absorption method to assess the 1-min bioavailable fluoride concentration was developed to meet this need. This method utilizes coiled filter paper that rapidly absorbs the aqueous phase of the dentifrice slurry followed by centrifugation to recover that fluid for fluoride measurement via fluoride ion-selective electrode. The analytical method was used to successfully determine the total fluoride and 1-min bioavailable fluoride in eight dentifrice products containing sodium fluoride (NaF), disodium monofluorophosphate (Na2FPO3, MFP), stannous fluoride (SnF2), or NaF with amorphous calcium phosphate (NaF + ACP). The results showed that some of the dentifrices tested had significantly lower potentially available fluoride than the total fluoride. For a MFP-containing sample, aged seven years past its expiry date, there was significant reduction in the bioavailable fluoride compared to MFP products that were not aged. Other than the aged MFP and the SnF2-containing samples the bioavailable fluoride for all products tested had at least 80 % of the label fluoride concentration. The filter paper absorption method yielded reproducible results for the products tested with MFP samples showing the largest variations. PMID:25821392

  12. Hydrogen fluoride and deuterium fluoride lasers. Citations from the International Aerospace Abstracts data base

    NASA Technical Reports Server (NTRS)

    Mauk, S. C.

    1980-01-01

    Research cited from the international literature adresses various aspects of hydrogen fluoride and deuterium fluoride lasers. Topics covered include flows, laser outputs, molecular relaxation, molecular rotation, energy conversion efficiency, reaction kinetics, and laser materials. Continous wave and pulsed laser are considered. This updated bibliography contains 283 citations, 53 of which are new additions to the previous edition.

  13. Oral fluoride levels 1 h after use of a sodium fluoride rinse: effect of sodium lauryl sulfate.

    PubMed

    Vogel, Gerald L; Schumacher, Gary E; Chow, Laurence C; Tenuta, Livia M A

    2015-01-01

    Increasing the concentration of free fluoride in oral fluids is an important goal in the use of topical fluoride agents. Although sodium lauryl sulfate (SLS) is a common dentifrice ingredient, the influence of this ion on plaque fluid and salivary fluid fluoride has not been examined. The purpose of this study was to investigate the effect of SLS on these parameters and to examine the effect of this ion on total (or whole) plaque fluoride, an important source of plaque fluid fluoride after a sufficient interval following fluoride administration, and on total salivary fluoride, a parameter often used as a surrogate measure of salivary fluid fluoride. Ten subjects accumulated plaque for 48 h before rinsing with a 12 mmol/l NaF (228 µg/g F) rinse containing or not containing 0.5% (w/w) SLS. SLS had no statistically significant effect on total plaque and total saliva fluoride but significantly increased salivary fluid and plaque fluid fluoride (by 147 and 205%, respectively). These results suggest that the nonfluoride components of topical agents can be manipulated to improve the fluoride release characteristics from oral fluoride reservoirs and that statistically significant change may be observed in plaque fluid and salivary fluid fluoride concentrations that may not be observed in total plaque and total saliva fluoride concentrations. PMID:25924684

  14. A comparative assessment of fluoride concentration available in saliva using daily prescribed topical fluoride agents

    PubMed Central

    Talwar, Manjit; Tewari, Amrit; Chawla, H. S.; Sachdev, Vinod

    2016-01-01

    Objective: To assess the availability of fluoride concentration in saliva following the use of fluoride mouthrinse and dentifrice. Materials and Methods: The experiment was carried out in 7–15 year-old school children of Chandigarh (n = 90). The children were nonfluoride users. Baseline saliva samples were collected. The subjects were exposed to two test agents, i.e., fluoride mouthrinse (0.05%, 225 ppm F) and dentifrice (1000 ppm F) for 7 days and on the day 8, saliva samples were collected over a 20 hrs period. Wash out period of 31/2 months was there before the subjects were exposed to the second test agent. Fluoride in saliva was estimated using fluoride ion-specific electrode. Written informed consent was taken. Statistical Analysis: Kolmogorov–Smirnov test was applied to test the normality of the variables. Mann–Whitney U-test was used to compare the fluoride concentration available in saliva at respective time intervals subsequent to use of the two test agents. Results: Fluoride concentration was elevated in saliva compared to baseline for both the test agents. Fluoride mouthrinse (0.05% sodium fluoride [NaF]) and dentifrice (1000 ppm monofluorophosphate [MFP]) showed a biphasic clearance. Peak in saliva occurred at 15 mins postuse. Night-time use resulted in higher concentration of fluoride in saliva compared to baseline. There was statistically significantly higher fluoride concentration available in saliva for the dentifrice at 5 hrs, 10 hrs, and 20 hrs postuse (P < 0.05). Conclusion: Subsequent to the use of NaF (0.05%) daily mouthrinse and MFP dentifrice (1000 ppm) the fluoride concentration in saliva remained elevated to a level of 0.12 ppm for mouthrinse and 0.14 ppm for dentifrice compared to baseline (0.03 ppm) up to 20 hrs postuse. The therapeutic window though not yet established but suggested is 0.1–1 ppm for prevention of demineralization, indicating that daily use of fluoride mouthrinse and dentifrice provides fluoride concentration in

  15. Influence of the method of fluoride administration on toxicity and fluoride concentrations in Japanese quail

    USGS Publications Warehouse

    Fleming, W.J.; Schuler, C.A.

    1988-01-01

    Young Japanese quail (Coturnix japonica) were administered NaF for 16 d either in their diet or by esophageal intubation. Based on the total fluoride ion (Emg F-) intake over the l6-d experimental period, fluoride administered by intubation was at least six times more toxic than that fed in the diet. Dietary concentrations of 1,000 ppm F- (Emg F- for 16 d = approx. 144) produced no mortality, whereas intubated doses produced 73% or greater mortality in all groups administered 54 mg F- /kg/d or more (Emg F- for 16 d _ approx. 23 mg). GraphIc companson of the regression of log F- ppm in femurs/mg F- intake showed that fluoride levels in the femurs of quail administered fluoride by intubation were higher than in those administered fluoride in the diet.

  16. Ion release from, and fluoride recharge of a composite with a fluoride-containing bioactive glass

    PubMed Central

    Davis, Harry B.; Gwinner, Fernanda; Mitchell, John C.; Ferracane, Jack L.

    2014-01-01

    Objectives Materials that are capable of releasing ions such as calcium and fluoride, that are necessary for remineralization of dentin and enamel, have been the topic of intensive research for many years. The source of calcium has most often been some form of calcium phosphate, and that for fluoride has been one of several metal fluoride or hexafluorophosphate salts. Fluoride-containing bioactive glass (BAG) prepared by the sol-gel method acts as a single source of both calcium and fluoride ions in aqueous solutions. The objective of this investigation was to determine if BAG, when added to a composite formulation, can be used as a single source for calcium and fluoride ion release over an extended time period, and to determine if the BAG-containing composite can be recharged upon exposure to a solution of 5,000 ppm fluoride. Methods BAG 61 (61% Si; 31% Ca; 4% P; 3% F; 1% B) and BAG 81 (81% Si; 11% Ca; 4% P; 3% F; 1% B) were synthesized by the sol gel method. The composite used was composed of 50/50 Bis-GMA/TEGDMA, 0.8% EDMAB, 0.4% CQ, and 0.05% BHT, combined with a mixture of BAG (15%) and strontium glass (85%) to a total filler load of 72% by weight. Disks were prepared, allowed to age for 24 h, abraded, then placed into DI water. Calcium and fluoride release was measured by atomic absorption spectroscopy and fluoride ion selective electrode methods, respectively, after 2, 22, and 222 h. The composite samples were then soaked for 5 min in an aqueous 5,000 ppm fluoride solution, after which calcium and fluoride release was again measured at 2, 22, and 222 h time points. Results Prior to fluoride recharge, release of fluoride ions was similar for the BAG 61 and BAG 81 composites after 2 h, and also similar after 22 h. At the four subsequent time points, one prior to, and three following fluoride recharge, the BAG 81 composite released significantly more fluoride ions (p<0.05). Both composites were recharged by exposure to 5,000 ppm fluoride, although the BAG 81

  17. Mechanism of Electrophilic Fluorination with Pd(IV): Fluoride Capture and Subsequent Oxidative Fluoride Transfer(.)

    PubMed

    Brandt, Jochen R; Lee, Eunsung; Boursalian, Gregory B; Ritter, Tobias

    2014-01-01

    Electrophilic fluorinating reagents derived from fluoride are desirable for the synthesis of (18)F-labeled molecules for positron emission tomography (PET). Here, we study the mechanism by which a Pd(IV)-complex captures fluoride and subsequently transfers it to nucleophiles. The intermediate Pd(IV)-F is formed with high rates even at the nano- to micromolar fluoride concentrations typical for radiosyntheses with (18)F due to fast formation of an outer-sphere complex between fluoride and Pd(IV). The subsequent fluorine transfer from the Pd(IV)-F complex is proposed to proceed through an unusual SET/fluoride transfer/SET mechanism. The findings detailed in this manuscript provide a theoretical foundation suitable for addressing a more general approach for electrophilic fluorination with high specific activity (18)F PET imaging. PMID:24376910

  18. Global Measurements of Atmospheric Sulfuryl Fluoride

    NASA Astrophysics Data System (ADS)

    Mühle, J.; Harth, C. M.; Salameh, P.; Miller, B. R.; Weiss, R. F.; Porter, L. W.; Fraser, P. J.; Greally, B. R.; O'Doherty, S.

    2006-12-01

    Sulfuryl fluoride (SO2F2) is used increasingly as a fumigant, but information about its emissions to the atmosphere is limited. Its atmospheric fate and lifetime are uncertain, with hydrolysis in the basic surface waters of the oceans a likely dominant sink, and its roles as a greenhouse gas and as a sulfur source to the stratosphere are unknown. We present here the first results of two years of high-frequency high-precision in situ observations of sulfuryl fluoride in the AGAGE (Advanced Global Atmospheric Gases Experiment) global measurement program. At La Jolla, California, baseline conditions are rarely achieved, and pollution events of up to 1.7 ppb (the exposure limit is 5 ppm) from nearby structural fumigation are common. At the Mace Head, Ireland, and Cape Grim, Tasmania, AGAGE stations, baseline conditions are observed with mixing ratios at the beginning of 2005 of ~1.0 ppt and ~0.9 ppt, respectively. Measured growth rates at these stations are ~0.06 ppt per year and ~0.04 ppt per year, respectively. Using these preliminary results and assuming no significant emissions in the southern hemisphere, a simple 2-box model can be used to estimate the tropospheric lifetime of sulfuryl fluoride as about one and a half decades, which is substantially longer than previous industry estimates. The corresponding modeled sulfuryl fluoride flux to the troposphere is ~2 x 109 g per year. Based on these initial measurements, the current global warming contribution of sulfuryl fluoride is likely small. Although the lifetime of sulfuryl fluoride is longer than that of carbonyl sulfide, sulfuryl fluoride is likely less important as source of sulfur to the stratosphere, due to its low atmospheric mixing ratio.

  19. Caries inhibition by fluoride-releasing primers.

    PubMed

    Kerber, L J; Donly, K J

    1993-10-01

    This study evaluated the caries inhibition of dentin primers with the addition of fluoride. Two standardized Class V preparations were placed in 20 molars, the gingival margin placed below the cementoenamel junction and the occlusal margin placed in enamel. Two dentin primers (Syntac and ScotchPrep) were placed in equal numbers of 20 preparations, according to manufacturer's instructions. Ammonium fluoride (10% by weight) was then added to these primers and they were placed in the remaining 20 preparations, opposing the non-fluoridated primer of the same system. All teeth were then restored with a non-fluoridated resin composite. All teeth were subjected to an artificial caries challenge (pH 4.2) for 5 days. Sections of 100 microns were obtained, photographed under polarized light microscopy, then demineralized areas were quantitated by digitization. Results demonstrated the mean areas (mm2 +/- S.D.) demineralization at 0.25 mm, 0.5 mm and 1.0 mm from the restoration margin to be: Syntac/fluoride (1.44 +/- 0.49, 1.68 +/- 0.54, 3.72 +/- 0.74); Syntac (1.99 +/- 0.58, 1.50 +/- 0.35, 2.98 +/- 1.26); ScotchPrep/fluoride (1.23 +/- 0.68, 1.55 +/- 0.64, 3.08 +/- 1.16); ScotchPrep (1.90 +/- 0.83, 1.71 +/- .038, 3.36 +/- 0.62). A paired t-test indicated primers with fluoride to demonstrate significantly less demineralization 0.25 mm from the restoration margin (P < 0.07). PMID:7880460

  20. The Northland fluoridation advocacy programme: an evaluation.

    PubMed

    Gowda, Sunitha; Thomas, David R

    2008-12-01

    On 20 July 2006, the Far North District Council resolved to fluoridate Kaitaia and Kaikohe. This was the first such initiative by any Territorial Local Authority (TLA) in New Zealand for 23 years, and resulted from a fluoridation advocacy programme. This paper describes the programme implementation, assesses its consistency with the principles of the Treaty of Waitangi, and critically examines the collaboration between the fluoride advocate and the key stakeholders. Process evaluation identified three main categories of programme implementation: policy advocacy, community action projects, and media advocacy. The collaboration of iwi, Maori health providers and the community suggests that the programme was consistent with the principles (partnership, participation and protection) ofthe Treaty ofWaitangi. Media advocacy played an important role in reflecting and engaging community views on fluoridation, and it influenced decision-making by the Far North District Council. The simultaneous, combined 'top-down and bottom-up' approach was an effective and successful strategy for fluoridation advocacy in the community. Less integrated approaches implemented on their own (such as the 'top down' approach in Whangarei and the 'bottom-up' approach in Dargaville) were not effective. PMID:19180864

  1. Emissions of fluorides from welding processes.

    PubMed

    Szewczyńska, Małgorzata; Pągowska, Emilia; Pyrzyńska, Krystyna

    2015-11-01

    The levels of fluoride airborne particulates emitted from welding processes were investigated. They were sampled with the patented IOM Sampler, developed by J. H. Vincent and D. Mark at the Institute of Occupational Medicine (IOM), personal inhalable sampler for simultaneous collection of the inhalable and respirable size fractions. Ion chromatography with conductometric detection was used for quantitative analysis. The efficiency of fluoride extraction from the cellulose filter of the IOM sampler was examined using the standard sample of urban air particle matter SRM-1648a. The best results for extraction were obtained when water and the anionic surfactant N-Cetyl-N-N-N-trimethylammonium bromide (CTAB) were used in an ultrasonic bath. The limits of detection and quantification for the whole procedure were 8μg/L and 24μg/L, respectively. The linear range of calibration was 0.01-10mg/L, which corresponds to 0.0001-0.1mg of fluorides per m(3) in collection of a 20L air sample. The concentration of fluorides in the respirable fraction of collected air samples was in the range of 0.20-1.82mg/m(3), while the inhalable fraction contained 0.23-1.96mg/m(3) of fluorides during an eight-hour working day in the welding room. PMID:26574102

  2. Fluoride and chlorhexidine release from filled resins.

    PubMed

    Shen, C; Zhang, N-Z; Anusavice, K J

    2010-09-01

    Resin-based materials that release either fluoride or chlorhexidine have been formulated for inhibiting caries activity. It is not known if the two agents, when incorporated into one material, would interact and affect their release potential. We hypothesized that the ratio of fluoride to chlorhexidine incorporated into a resin, and the pH of the storage medium, will affect their releases from the material. The material investigated contained 23 wt% of filler, and the ratios of calcium fluoride to chlorhexidine diacetate were 8/2, 5/5, and 2/8. The release was conducted in pH 4, 5, and 6 acetate buffers. The results showed that release of either agent increased as the pH of the medium decreased. The presence of fluoride salt substantially reduced the chlorhexidine release, while the presence of a specific quantity of chlorhexidine significantly increased fluoride release. This interaction can be utilized to optimize the release of either agent for therapeutic purposes. PMID:20581354

  3. Effective use of self-care fluoride administration in Asia.

    PubMed

    Zero, D T; Marinho, V C C; Phantumvanit, P

    2012-02-01

    The caries-preventive benefits of fluoride are generally accepted by dental researchers and practicing professionals worldwide. The benefits of fluoride toothpastes and mouthrinses have been supported by several high-quality systematic reviews. The formulation of a fluoride toothpaste and biological (salivary flow rate) and behavioral factors (brushing frequency, brushing time, post-brushing rinsing practices, timing of brushing, and amount of toothpaste applied) can influence anticaries efficacy. Fluoride mouthrinses have simpler formulations and can have better oral fluoride retention profiles than fluoride toothpastes, depending on post-brushing rinsing behaviors. Fluoride continues to be the mainstay of caries control; however, there is still the need to determine the most effective approach for fluoride utilization in children and adults who remain caries-active. PMID:22261258

  4. Removing Fluoride Ions with Continously Fed Activated Alumina.

    ERIC Educational Resources Information Center

    Wu, Yeun C.; Itemaking, Isara Cholapranee

    1979-01-01

    Discussed is the mathematical basis for determining fluoride removal during water treatment with activated alumina. The study indicates that decreasing particle size decreases the pore diffusion effect and increases fluoride removal. (AS)

  5. American Academy of Pediatrics. Fluoride supplementation. Committee on Nutrition.

    PubMed

    1986-05-01

    This statement reviews the rationale for the use of fluoride supplements for infants and children. The concept of fluoridation of water supplies as an effective and cost-beneficial method of reducing caries prevalence in the general population is strongly supported. In the absence of an adequately fluoridated water supply, fluoride supplements should be given to all children. This should begin at about 2 weeks of age; the dosage will depend on the concentration of fluoride in the local water supply. Fluoride-containing dentifrices are an important source of topical fluoride, but it is essential that parents be aware of the danger of excessive fluoride intake and that they teach their children to avoid swallowing toothpaste. PMID:3703642

  6. FLUORIDE: A REVIEW OF USE AND EFFECTS ON HEALTH

    PubMed Central

    Kanduti, Domen; Sterbenk, Petra; Artnik, Barbara

    2016-01-01

    Introduction: Appropriate oral health care is fundamental for any individual’s health. Dental caries is still one of the major public health problems. The most effective way of caries prevention is the use of fluoride. Aim: The aim of our research was to review the literature about fluoride toxicity and to inform physicians, dentists and public health specialists whether fluoride use is expedient and safe. Methods: Data we used in our review were systematically searched and collected from web pages and documents published from different international institutions. Results: Fluoride occurs naturally in our environment but we consume it in small amounts. Exposure can occur through dietary intake, respiration and fluoride supplements. The most important factor for fluoride presence in alimentation is fluoridated water. Methods, which led to greater fluoride exposure and lowered caries prevalence, are considered to be one of the greatest accomplishments in the 20th century`s public dental health. During pregnancy, the placenta acts as a barrier. The fluoride, therefore, crosses the placenta in low concentrations. Fluoride can be transmitted through the plasma into the mother’s milk; however, the concentration is low. The most important action of fluoride is topical, when it is present in the saliva in the appropriate concentration. The most important effect of fluoride on caries incidence is through its role in the process of remineralization and demineralization of tooth enamel. Acute toxicity can occur after ingesting one or more doses of fluoride over a short time period which then leads to poisoning. Today, poisoning is mainly due to unsupervised ingestion of products for dental and oral hygiene and over-fluoridated water. Conclusion: Even though fluoride can be toxic in extremely high concentrations, it`s topical use is safe. The European Academy of Paediatric Dentistry (EAPD) recommends a preventive topical use of fluoride supplements because of their

  7. METHOD FOR DISSOLVING LANTHANUM FLUORIDE CARRIER FOR PLUTONIUM

    DOEpatents

    Koshland, D.E. Jr.; Willard, J.E.

    1961-08-01

    A method is described for dissolving lanthanum fluoride precipitates which is applicable to lanthanum fluoride carrier precipitation processes for recovery of plutonium values from aqueous solutions. The lanthanum fluoride precipitate is contacted with an aqueous acidic solution containing dissolved zirconium in the tetravalent oxidation state. The presence of the zirconium increases the lanthanum fluoride dissolved and makes any tetravalent plutonium present more readily oxidizable to the hexavalent state. (AEC)

  8. A study of fluoride groundwater occurrence in Nathenje, Lilongwe, Malawi

    NASA Astrophysics Data System (ADS)

    Msonda, K. W. M.; Masamba, W. R. L.; Fabiano, E.

    A study was carried out to determine fluoride concentration in groundwaters of Nathenje area situated in Lilongwe District in the central region of Malawi. Water samples were collected from 176 boreholes and shallow wells during different months in 2001 and 2002. Samples were then analysed for fluoride by using a fluoride electrode and an ion selective meter. The results showed that fluoride concentrations for the rainy season varied from <0.5 to 6.98 ± 0.01 mg/l with 52.9% of the boreholes above the World Health Organisation (WHO) maximum permissible limit of 1.5 mg/l. Fluoride concentrations for dry season ranged from <0.5 to 7.02 ± 0.02 mg/l with 50.8% of boreholes above 1.5 mg/l. Fluoride concentrations for the two seasons were significantly different from each other ( p < 0.05). Fluoride data was used to produce a fluoride distribution map. From the map, it was observed that fluoride concentrations in this area followed a pattern. The central part of Nathenje had high fluoride concentration of between 2 and 7.02 mg/l and these high fluoride values seemed to extend eastwards beyond the boundary of the study area. However, the southern and western parts had <1 mg/l of fluoride. The high groundwater fluoride values seem to be associated with the weathered basement complex containing biotite that is a probable source of fluoride. The other suspected sources of fluoride in Nathenje groundwater could be due to the dissolution of hornblende, fluorite and amphibole, which are reported to occur in rocks and soils in this area. There was evidence of dental fluorosis in areas where the fluoride concentration was high.

  9. Pharmacokinetics of fluoride in toddlers after application of 5% sodium fluoride dental varnish.

    PubMed

    Milgrom, Peter; Taves, Donald M; Kim, Amy S; Watson, Gene E; Horst, Jeremy A

    2014-09-01

    The prevalence of dental caries (tooth decay) among preschool children is increasing, driven partially by an earlier age of onset of carious lesions. The American Academy of Pediatrics recommends application of 5% sodium fluoride varnish at intervals increasing with caries risk status, as soon as teeth are present. However, the varnishes are marketed for treatment of tooth sensitivity and are regulated as medical devices rather than approved by the US Food and Drug Administration for prevention of dental caries (tooth decay). The objective of this research is to examine the safety of use in toddlers by characterizing the absorption and distribution profile of a currently marketed fluoride varnish. We measured urinary fluoride for 5 hours after application of fluoride varnish to teeth in 6 toddlers aged 12 to 15 months. Baseline levels were measured on a separate day. The urine was extracted from disposable diapers, measured by rapid diffusion, and extrapolated to plasma levels. The mean estimated plasma fluoride concentration was 13 μg/L (SD, 9 μg/L) during the baseline visit and 21 μg/L (SD, 8 μg/L) during the 5 hours after treatment. Mean estimated peak plasma fluoride after treatment was 57 μg/L (SD, 22 μg/L), and 20 μg/kg (SD, 4 μg/L) was retained on average. Retained fluoride was 253 times lower than the acute toxic dose of 5 mg/kg. Mean plasma fluoride after placement of varnish was within an SD of control levels. Occasional application of fluoride varnish following American Academy of Pediatrics guidance is safe for toddlers. PMID:25136045

  10. Changes in plaque fluoride levels by school-based fluoride rinsing and tablet programs in Bangladesh.

    PubMed

    Hossain, Abu Nasir Mohammad Nazmul; Sampaio, Fabio Correia; von der Fehr, Frithjof Ramm; Arneberg, Pål

    2003-02-01

    The aim of this study was to evaluate the effects of school-based fluoride rinsing and tablet programs on plaque fluoride levels. A total of 42 children (8-9 years) were selected from two neighboring schools in Dhaka, Bangladesh. After caries recordings, vestibular plaque samples from the maxillary central incisors and mandibular first molars were collected and frozen on day 0 (baseline). The subjects of one school (rinsing group, n = 15) rinsed with 0.05% NaF, while those from the other school (tablet group, n = 16) used a 0.5 mg F tablet on the 5 school days during a 3-week period. The surfaces were sampled on the first and last school day every week. The fluoride and protein contents of each sample were analyzed using micro-techniques. The median plaque fluoride levels were 9.1 ppm at baseline in the rinsing group and 2.5 ppm in the tablet group (P < 0.05). This difference could in part be related to reported fluoride toothpaste usage. After 4 days on the fluoride programs, plaque fluoride levels in the rinsing group increased to 27.3, 24.5 and 14.2 ppm in the 3 consecutive weeks. The corresponding values after tablet usage were 8.0, 6.5 and 7.1 ppm, respectively. After 3 days without fluoride during the weekends, levels declined towards baseline values in both groups. Hence, the plaque fluoride levels in 8 to 9-year-old Bangladeshi children were increased by both rinsing and tablet programs, but the effect was not detectable 3 days later. PMID:12635779

  11. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  12. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  13. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.212 Section... Industry: Superphosphoric Acid Plants § 60.212 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 5.0 g/megagram (Mg) of equivalent P2O5...

  14. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.232 Section... Industry: Triple Superphosphate Plants § 60.232 Standard for fluorides. On and after the date on which the... gases which contain total fluorides in excess of 100 g/megagram (Mg) of equivalent P2O5 feed (0.20...

  15. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  16. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  17. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  18. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.212 Section... Industry: Superphosphoric Acid Plants § 60.212 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 5.0 g/megagram (Mg) of equivalent P2O5...

  19. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  20. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.232 Section... Industry: Triple Superphosphate Plants § 60.232 Standard for fluorides. On and after the date on which the... gases which contain total fluorides in excess of 100 g/megagram (Mg) of equivalent P2O5 feed (0.20...

  1. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  2. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.222 Section... Industry: Diammonium Phosphate Plants § 60.222 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 30 g/megagram (Mg) of equivalent P2O5 feed...

  3. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  4. COMPLEX FLUORIDES OF PLUTONIUM AND AN ALKALI METAL

    DOEpatents

    Seaborg, G.T.

    1960-08-01

    A method is given for precipitating alkali metal plutonium fluorides. such as KPuF/sub 5/, KPu/sub 2/F/sub 9/, NaPuF/sub 5/, and RbPuF/sub 5/, from an aqueous plutonium(IV) solution by adding hydrogen fluoride and alkali-metal- fluoride.

  5. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  6. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  7. 40 CFR 180.575 - Sulfuryl fluoride; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Sulfuryl fluoride; tolerances for... § 180.575 Sulfuryl fluoride; tolerances for residues. (a)(1) General. Tolerances are established for residues of sulfuryl fluoride in or on the following commodities from the postharvest fumigation...

  8. Fluoride inhibition of proton-translocating ATPases of oral bacteria.

    PubMed Central

    Sutton, S V; Bender, G R; Marquis, R E

    1987-01-01

    The ATPases of isolated membranes of lactic acid bacteria were found to be inhibited by fluoride in a complex manner. Among the enzymes tested, that of Streptococcus mutans GS-5 was the most sensitive to fluoride, and the initial rate of hydrolysis of ATP was reduced 50% by approximately 3 mM fluoride. The enzyme of Lactobacillus casei ATCC 4646 was the most resistant, and about 25 mM fluoride was required for 50% inhibition. The response to fluoride appeared to involve reversible, noncompetitive inhibition during short exposure to low levels of fluoride and nonreversible inhibition at higher fluoride levels. In addition, kinetic studies of the effects of fluoride on the enzymes of membranes of S. mutans and L. casei indicated that reversible inhibition was at least partly overcome at high levels of either ATP or Mg. The effects of pH on fluoride inhibition of ATPases were markedly different from the effects of pH on inhibition of acid/base regulation of intact cells by fluoride. It appeared that formation of HF was not required for inhibition of the ATPases. F1 ATPases isolated from the membranes by washing with buffers of low ionic strength proved to be less sensitive to fluoride than the membrane-associated F1F0 holoenzymes, and it was concluded that the F0 or membrane sector of the holoenzyme is involved in fluoride inhibition. PMID:2889674

  9. Graphite Fluoride Fiber Composites For Heat Sinking

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheh; Long, Martin; Stahl, Mark

    1989-01-01

    Graphite fluoride fiber/polymer composite materials consist of graphite fluoride fibers in epoxy, polytetrafluoroethylene, or polyimide resin. Combines high electrical resistivity with high thermal conductivity and solves heat-transfer problems of many electrical systems. Commercially available in powder form, for use as dry lubricant or cathode material in lithium batteries. Produced by direct fluorination of graphite powder at temperature of 400 to 650 degree C. Applications include printed-circuit boards for high-density power electronics, insulators for magnetic-field cores like those found in alternators and transformers, substrates for thin-film resistors, and electrical-protection layers in aircraft de-icers.

  10. Reconstructing temporal variation of fluoride uptake in eastern grey kangaroos (Macropus giganteus) from a high-fluoride area by analysis of fluoride distribution in dentine.

    PubMed

    Kierdorf, Horst; Rhede, Dieter; Death, Clare; Hufschmid, Jasmin; Kierdorf, Uwe

    2016-04-01

    Trace element profiling in the incrementally formed dentine of mammalian teeth can be applied to reconstruct temporal variation of incorporation of these elements into the tissue. Using an electron microprobe, this study analysed fluoride distribution in dentine of first and third mandibular molars of free-ranging eastern grey kangaroos inhabiting a high-fluoride area, to assess temporal variation in fluoride uptake of the animals. Fluoride content in the early-formed dentine of first molars was significantly lower than in the late-formed dentine of these teeth, and was also lower than in both, the early and the late-formed dentine of third molars. As early dentine formation in M1 takes place prior to weaning, this finding indicates a lower dentinal fluoride uptake during the pre-weaning compared to the post-weaning period. This is hypothetically attributed to the action of a partial barrier to fluoride transfer from blood to milk in lactating females and a low bioavailability of fluoride ingested together with milk. Another factor contributing to lower plasma fluoride levels in juveniles compared to adults is the rapid clearance of fluoride from blood plasma in the former due to their intense skeletal growth. The combined action of these mechanisms is considered to explain why in kangaroos from high-fluoride areas, the (early-formed) first molars are not affected by dental fluorosis while the (later-formed) third and fourth molars regularly exhibit marked to severe fluorotic lesions. PMID:26736058

  11. Some electronic and magnetic properties of Fluoride ion in Fluoride structure nanocrystals

    NASA Astrophysics Data System (ADS)

    Imtani, Ali Nasir

    2012-01-01

    We have investigated the effects of the environment potential around Fluoride ion on some important electronic and magnetic properties such as dipole polarisability, moment of oscillator strengths S(k) and magnetic susceptibility. The theoretical procedure is based on the variational-perturbation theory with two parameter trial functions incorporated in an ionic model. We estimate these properties in four cases for Fluoride ion; free ion, ion under different potentials, ion in the crystals and ion in nanocrystal, CdF2, CaF2, PbF2, SrF2 and BaF2. Our results indicate that these properties vary with ion environments and the free state of Fluoride ion has higher values and there is linearity behaviour of these properties with lattice constant. For Fluoride ion in nanocrystal, we have found that there is an extra parameter that can also affect the dipole polarisability, the number of ions in the structure.

  12. Plaque fluoride concentrations in a community without water fluoridation: effects of calcium and use of a fluoride or placebo dentifrice.

    PubMed

    Whitford, G M; Buzalaf, M A R; Bijella, M F B; Waller, J L

    2005-01-01

    The results of a recent study by Whitford et al. [Caries Res 2002;36:256-265] with subjects whose drinking water was fluoridated led to two major conclusions: (1) Compared to the use of a placebo dentifrice, plaque fluoride concentrations ([F]) throughout much of the day are not significantly increased by the use of an F dentifrice but (2) they are positively related to plaque [Ca] (p = 0.0001). The present double-blind, double-crossover study with 16 subjects used the same protocol and was done to: (1) determine the effects of the use of an F dentifrice on salivary and plaque [F] in a community without water fluoridation and (2) further examine the relationship between plaque [Ca] and [F]. Following the use of an F dentifrice or placebo for one week, whole saliva and plaque were collected 1.0 and 12 h after the last use of the products. The study was repeated to include rinsing with a 20 mmol/l CaCl(2) solution immediately before the use of the dentifrices. The CaCl(2) rinse had only minor effects on salivary [Ca] and [F] and none on the plaque concentrations. Unlike the results found in the fluoridated community, all salivary and plaque [F] associated with the use of the F dentifrice were significantly higher than those associated with the use of the placebo. The results suggest that the cariostatic effectiveness of an F dentifrice should be greater in areas without water fluoridation. As noted previously, plaque [F] were positively related to plaque [Ca] (p = 0.0001). PMID:15741721

  13. Fluoride geochemistry of thermal waters in Yellowstone National Park: I. Aqueous fluoride speciation

    NASA Astrophysics Data System (ADS)

    Deng, Yamin; Nordstrom, D. Kirk; Blaine McCleskey, R.

    2011-08-01

    Thermal water samples from Yellowstone National Park (YNP) have a wide range of pH (1-10), temperature, and high concentrations of fluoride (up to 50 mg/l). High fluoride concentrations are found in waters with field pH higher than 6 (except those in Crater Hills) and temperatures higher than 50 °C based on data from more than 750 water samples covering most thermal areas in YNP from 1975 to 2008. In this study, more than 140 water samples from YNP collected in 2006-2009 were analyzed for free-fluoride activity by ion-selective electrode (ISE) method as an independent check on the reliability of fluoride speciation calculations. The free to total fluoride concentration ratio ranged from <1% at low pH values to >99% at high pH. The wide range in fluoride activity can be explained by strong complexing with H + and Al 3+ under acidic conditions and lack of complexing under basic conditions. Differences between the free-fluoride activities calculated with the WATEQ4F code and those measured by ISE were within 0.3-30% for more than 90% of samples at or above 10 -6 molar, providing corroboration for chemical speciation models for a wide range of pH and chemistry of YNP thermal waters. Calculated speciation results show that free fluoride, F -, and major complexes ( HF(aq)0, AlF 2+, AlF2+ and AlF30) account for more than 95% of total fluoride. Occasionally, some complex species like AlF4-, FeF 2+, FeF2+, MgF + and BF(OH)2- may comprise 1-10% when the concentrations of the appropriate components are high. According to the simulation results by PHREEQC and calculated results, the ratio of main fluoride species to total fluoride varies as a function of pH and the concentrations and ratios of F and Al.

  14. Fluoride geochemistry of thermal waters in Yellowstone National Park: I. Aqueous fluoride speciation

    USGS Publications Warehouse

    Deng, Y.; Nordstrom, D.K.; Blaine, McCleskey R.

    2011-01-01

    Thermal water samples from Yellowstone National Park (YNP) have a wide range of pH (1-10), temperature, and high concentrations of fluoride (up to 50mg/l). High fluoride concentrations are found in waters with field pH higher than 6 (except those in Crater Hills) and temperatures higher than 50??C based on data from more than 750 water samples covering most thermal areas in YNP from 1975 to 2008. In this study, more than 140 water samples from YNP collected in 2006-2009 were analyzed for free-fluoride activity by ion-selective electrode (ISE) method as an independent check on the reliability of fluoride speciation calculations. The free to total fluoride concentration ratio ranged from <1% at low pH values to >99% at high pH. The wide range in fluoride activity can be explained by strong complexing with H+ and Al3+ under acidic conditions and lack of complexing under basic conditions. Differences between the free-fluoride activities calculated with the WATEQ4F code and those measured by ISE were within 0.3-30% for more than 90% of samples at or above 10-6 molar, providing corroboration for chemical speciation models for a wide range of pH and chemistry of YNP thermal waters. Calculated speciation results show that free fluoride, F-, and major complexes (HF(aq)0, AlF2+, AlF2+ and AlF30) account for more than 95% of total fluoride. Occasionally, some complex species like AlF4-, FeF2+, FeF2+, MgF+ and BF2(OH)2- may comprise 1-10% when the concentrations of the appropriate components are high. According to the simulation results by PHREEQC and calculated results, the ratio of main fluoride species to total fluoride varies as a function of pH and the concentrations and ratios of F and Al. ?? 2011.

  15. Manufacture of high purity low arsenic anhydrous hydrogen fluoride

    SciTech Connect

    Jenczewski, T.J.; Sturtevant, R.L.; Morgan, T.R.; Boghean, B.J.; Butt, D.C.

    1988-07-12

    A process for manufacturing anhydrous hydrogen fluoride with reduced levels of arsenic impurity from arsenic contaminated anhydrous hydrogen fluoride is described which comprises: (a) contacting the anhydrous hydrogen fluoride with an effective amount of hydrogen peroxide to oxidize the arsenic impurity in the presence of a catalyst which comprises a catalytic amount of (i) molybdenum or an inorganic molybdenum compound and (ii) a phosphate compound, at a temperature and for a period of time sufficient to oxidize volatile trivalent arsenic impurities in the anhydrous hydrogen fluoride to non-volatile pentavalent arsenic compounds, and (b) distilling the resulting mixture and recovering anhydrous hydrogen fluoride with reduced levels of arsenic impurity.

  16. Fluoride: a risk factor for inflammatory bowel disease?

    PubMed

    Follin-Arbelet, Benoit; Moum, Bjørn

    2016-09-01

    Although the association between inflammatory bowel disease (IBD) and oral hygiene has been noticed before, there has been little research on prolonged fluoride exposure as a possible risk factor. In the presented cases, exposure to fluoride seems indirectly associated with higher incidence of IBD. Fluoride toxicology and epidemiology documents frequent unspecific chronic gastrointestinal symptoms and intestinal inflammation. Efflux genes that confer resistance to environmental fluoride may select for IBD associated gut microbiota and therefore be involved in the pathogenesis. Together these multidisciplinary results argue for further investigation on the hypothesis of fluoride as a risk factor for IBD. PMID:27199224

  17. PROCESS FOR THE PRODUCTION OF AMMONIUM URANIUM FLUORIDE

    DOEpatents

    Ellis, A.S.; Mooney, R.B.

    1953-08-25

    This patent relates to the preparation of ammonium uranium fluoride. The process comprises adding a water soluble fluoride to an aqueous solution of a uranous compound containing an ammonium salt, and isolating the resulting precipitate. This patent relates to the manufacture of uranium tetnafluoride from ammonium uranium fluoride, NH/sub 4/UF/sub 5/. Uranium tetrafluoride is prepared by heating the ammonium uranium fluoride to a temperature at which dissociation occurs with liberation of ammonium fluoride. Preferably the process is carried out under reduced pressure, or in a current of an inert gas.

  18. Appropriate uses of fluorides for children: guidelines from the Canadian Workshop on the Evaluation of Current Recommendations Concerning Fluorides.

    PubMed Central

    Clark, D C

    1993-01-01

    OBJECTIVE: To prevent fluorosis caused by excessive fluoride ingestion by revising recommendations for fluoride intake by children. OPTIONS: Limiting fluoride ingestion from fluoridated water, fluoride supplements and fluoride dentifrices. OUTCOMES: Reduction in the prevalence of dental fluorosis and continued prevention of dental caries. EVIDENCE: Before the workshop, experts prepared comprehensive literature reviews of fluoride therapies, fluoride ingestion and the prevalence and causes of dental fluorosis. The papers, which were peer-reviewed, revised and circulated to the workshop participants, formed the basis of the workshop discussions. VALUES: Recommendations to limit fluoride intake were vigorously debated before being adopted as the consensus opinion of the workshop group. BENEFITS, HARMS AND COSTS: Decrease in the prevalence of dental fluorosis with continuing preventive effects of fluoride use. The only significant cost would be in preparing new, low-concentration fluoride products for distribution. RECOMMENDATIONS: Fluoride supplementation should be limited to children 3 years of age and older in areas where there is less than 0.3 ppm of fluoride in the water supply. Children in all areas should use only a "pea-sized" amount of fluoride dentifrice no more than twice daily under the supervision of an adult. VALIDATION: These recommendations are almost identical to changes to recommendations for the use of fluoride supplements recently proposed by a group of European countries. SPONSORS: The workshop was organized by Dr. D. Christopher Clark, of the University of British Columbia, and Drs. Hardy Limeback and Ralph C. Burgess, of the University of Toronto, and funded by Proctor and Gamble Inc., Toronto, the Medical Research Council of Canada and Health Canada (formerly the Department of National Health and Welfare). The recommendations were formally adopted by the Canadian Dental Association in April 1993. PMID:8261348

  19. Surface crystallization of a fluoride glass

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.; Doremus, Robert H.

    1983-01-01

    Growth of crystals on the surface of a Zr-Ba-La fluoride glass was observed by optical and scanning electron microscopy. Small, dark crystal nucleated rapidly and grew to a size of about 10 microns; then they stopped growing, and wrinkled regions emerged, covering the entire crystal surface.

  20. Beryllium fluoride film protects beryllium against corrosion

    NASA Technical Reports Server (NTRS)

    O donnell, P. M.; Odonnell, P. M.

    1967-01-01

    Film of beryllium fluoride protects beryllium against corrosion and stress corrosion cracking in water containing chloride ion concentrations. The film is formed by exposing the beryllium to fluorine gas at 535 degrees C or higher and makes beryllium suitable for space applications.

  1. THE DEVELOPMENT OF AN INDIGENOUS FLUORIDE FILTER

    EPA Science Inventory

    Given that an essential component of the design is that it can be adapted for use throughout the world, the potential media investigated are those available in the regions containing fluoride contaminated groundwater. From the literature, wood charcoal, bone char, laterite and...

  2. Xenon fluorides show potential as fluorinating agents

    NASA Technical Reports Server (NTRS)

    Chernick, C. L.; Shieh, T. C.; Yang, N. C.

    1967-01-01

    Xenon fluorides permit the controlled addition of fluorine across an olefinic double bond. They provide a series of fluorinating agents that permit ready separation from the product at a high purity. The reactions may be carried out in the vapor phase.

  3. Polyvinylidene fluoride film as a capacitor dielectric

    NASA Technical Reports Server (NTRS)

    Dematos, H. V.

    1981-01-01

    Thin strips of polyvinylidene fluoride film (PVDF) with vacuum deposited electrodes were made into capacitors by conventional winding and fabrication techniques. These devices were used to identify and evaluate the performance characteristics offered by the PVDF in metallized film capacitors. Variations in capacitor parameters with temperature and frequence were evaluated and compared with other dielectric films. Their impact on capacitor applications is discussed.

  4. Actinide measurements by AMS using fluoride matrices

    NASA Astrophysics Data System (ADS)

    Cornett, R. J.; Kazi, Z. H.; Zhao, X.-L.; Chartrand, M. G.; Charles, R. J.; Kieser, W. E.

    2015-10-01

    Actinides can be measured by alpha spectroscopy (AS), mass spectroscopy or accelerator mass spectrometry (AMS). We tested a simple method to separate Pu and Am isotopes from the sample matrix using a single extraction chromatography column. The actinides in the column eluent were then measured by AS or AMS using a fluoride target matrix. Pu and Am were coprecipitated with NdF3. The strongest AMS beams of Pu and Am were produced when there was a large excess of fluoride donor atoms in the target and the NdF3 precipitates were diluted about 6-8 fold with PbF2. The measured concentrations of 239,240Pu and 241Am agreed with the concentrations in standards of known activity and with two IAEA certified reference materials. Measurements of 239,240Pu and 241Am made at A.E. Lalonde AMS Laboratory agree, within their statistical uncertainty, with independent measurements made using the IsoTrace AMS system. This work demonstrated that fluoride targets can produce reliable beams of actinide anions and that the measurement of actinides using fluorides agree with published values in certified reference materials.

  5. Aqueous vinylidene fluoride polymer coating composition

    NASA Technical Reports Server (NTRS)

    Bartoszek, Edward J. (Inventor); Christofas, Alkis (Inventor)

    1978-01-01

    A water-based coating composition which may be air dried to form durable, fire resistant coatings includes dispersed vinylidene fluoride polymer particles, emulsified liquid epoxy resin and a dissolved emulsifying agent for said epoxy resin which agent is also capable of rapidly curing the epoxy resin upon removal of the water from the composition.

  6. Monitoring of fluoride in groundwater resources of Iran.

    PubMed

    Mesdaghinia, Alireza; Vaghefi, Kooshiar Azam; Montazeri, Ahmad; Mohebbi, Mohammad Reza; Saeedi, Reza

    2010-04-01

    Fluoride concentration in groundwater resources that used as the source of drinking water in urban areas of Iran was determined. All of the groundwater wells located in urban areas were monitored in 2008. Fluoride concentration of water samples was measured using SPADNS method. The nationwide mean fluoride concentration in the groundwater resources was found to be 0.47 +/- 0.28 (+/- standard deviation) mg/L. Only in Bushehr Province, the provincial mean fluoride level in the groundwater resources was higher than the WHO guideline value of 1.5 mg/L (1.86 +/- 0.86 mg/L). At nationwide level, the portion of extracted groundwater with fluoride concentration lower than the minimum permissible level of 0.5 mg/L, desirable fluoride range of 0.5-1.5 mg/L and elevated fluoride level was 69.2, 29.3 and 1.4%, respectively. In the areas with low fluoride content drinking water, it is recommended that fluoride is absorbed by use of high fluoride content foods and beverages. The recommendations for the circumstances with excessive fluoride content of drinking water are provision of drinking water from alternative sources and defluoridation of drinking water by point-of-use systems, respectively. PMID:20306173

  7. Fluoride Content of Bottled Drinking Water in Chennai, Tamilnadu

    PubMed Central

    Ravi, Karunya; Rajapandian, K.; Gurunathan, Deepa

    2015-01-01

    Context The optimum level of fluoride in drinking water is 0.7 to 1.2 ppm. Decreased fluoride concentration leads to increased risk of caries and increased concentration can lead to dental or skeletal fluorosis. One crore liters of water is supplied to Chennai and surrounding areas through pouches and bottles which carters about one third of city population. Aim The aim of this study is to determine the fluoride concentration in top 10 bottled waters in Chennai and to check the accuracy of their labelling. Materials and Methods Top selling bottled waters, 6 multinational and 4 Non- multinational brands were selected for the study. Three different batches of each brand were purchased. The labels of the bottled were removed after collecting the details regarding fluoride content. All the bottles were numbered and sent for fluoride content analysis using SPADNS calorimetric method. Results All the brands and batches which were analysed for the study had less than optimal fluoride content and there is a significant variation in fluoride concentration of each brand and among different batches of same brand bottled waters. The range of fluoride level in tested samples was between 0.27 to 0.59. Only one brand’s label had information regarding the fluoride content. Conclusion Standardization of fluoride levels in bottled waters and labelling of fluoride content should become mandatory. PMID:26557612

  8. Solid electrolytes for fluoride ion batteries: ionic conductivity in polycrystalline tysonite-type fluorides.

    PubMed

    Rongeat, Carine; Reddy, M Anji; Witter, Raiker; Fichtner, Maximilian

    2014-02-12

    Batteries based on a fluoride shuttle (fluoride ion battery, FIB) can theoretically provide high energy densities and can thus be considered as an interesting alternative to Li-ion batteries. Large improvements are still needed regarding their actual performance, in particular for the ionic conductivity of the solid electrolyte. At the current state of the art, two types of fluoride families can be considered for electrolyte applications: alkaline-earth fluorides having a fluorite-type structure and rare-earth fluorides having a tysonite-type structure. As regard to the latter, high ionic conductivities have been reported for doped LaF3 single crystals. However, polycrystalline materials would be easier to implement in a FIB due to practical reasons in the cell manufacturing. Hence, we have analyzed in detail the ionic conductivity of La(1-y)Ba(y)F(3-y) (0 ≤ y ≤ 0.15) solid solutions prepared by ball milling. The combination of DC and AC conductivity analyses provides a better understanding of the conduction mechanism in tysonite-type fluorides with a blocking effect of the grain boundaries. Heat treatment of the electrolyte material was performed and leads to an improvement of the ionic conductivity. This confirms the detrimental effect of grain boundaries and opens new route for the development of solid electrolytes for FIB with high ionic conductivities. PMID:24444763

  9. Geological sources of fluoride and acceptable intake of fluoride in an endemic fluorosis area, southern Iran.

    PubMed

    Battaleb-Looie, Sedigheh; Moore, Farid; Jacks, Gunnar; Ketabdari, Mohammad Reza

    2012-10-01

    The present study is the first attempt to put forward possible source(s) of fluoride in the Dashtestan area, Bushehr Province, southern Iran. In response to reports on the high incidence of dental fluorosis, 35 surface and groundwater samples were collected and analysed for fluoride. The results indicate that dissolved fluoride in the study area is above the maximum permissible limit recommended by the World Health Organization (WHO). An additional 35 soil and rock samples were also collected and analysed for fluoride, and rock samples were subjected to petrographic investigations and X-ray diffraction. The results of these analyses show that the most likely source for fluoride in the groundwater is from clay minerals (chlorite) and micas (muscovite, sericite, and biotite) in the soils and rocks in the area. We also note that due to the high average temperatures all year round and excessive water consumption in the area, the optimum fluoride dose level should be lower than that recommended by the WHO. PMID:22426705

  10. Zirconium fluoride glass - Surface crystals formed by reaction with water

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.; Bansal, N. P.; Bradner, T.; Murphy, D.

    1984-01-01

    The hydrated surfaces of a zirconium barium fluoride glass, which has potential for application in optical fibers and other optical elements, were observed by scanning electron microscopy. Crystalline zirconium fluoride was identified by analysis of X-ray diffraction patterns of the surface crystals and found to be the main constituent of the surface material. It was also found that hydrated zirconium fluorides form only in highly acidic fluoride solutions. It is possible that the zirconium fluoride crystals form directly on the glass surface as a result of its depletion of other ions. The solubility of zirconium fluoride is suggested to be probably much lower than that of barium fluoride (0.16 g/100 cu cm at 18 C). Dissolution was determined to be the predominant process in the initial stages of the reaction of the glass with water. Penetration of water into the glass has little effect.

  11. New Insight on the Response of Bacteria to Fluoride

    PubMed Central

    Breaker, R.R.

    2012-01-01

    Fluoride has been used for decades to prevent caries and it is well established that this anion can inhibit the growth of bacteria. However, the precise effects that fluoride has on bacteria and the mechanisms that bacteria use to overcome fluoride toxicity have largely remained unexplored. Recently, my laboratory reported the discovery of biological systems that bacteria use to sense fluoride and reduce fluoride toxicity. These sensors and their associated genes are very widespread in biology, which has implications for a number of issues that are central to the use of fluoride for dental care. Below I provide a summary of our findings, comment on some of the key prospects for expanding our understanding of fluoride's effects on biology, and propose some future uses of this knowledge. PMID:22327376

  12. FLUORIDE CONTENT OF COMMERCIALLY AVAILABLE SOY MILK PRODUCTS IN THAILAND.

    PubMed

    Rirattanapong, Opas; Rirattanapong, Praphasri

    2016-01-01

    Abstract. In Thailand, the consumption of soy milk products is common but there is limited data about their fluoride content. The purpose of this study was to es- timate the fluoride content of soy milk products available in Thailand. Fluoride content was determined for 76 brands of soy milk using a F-ion-specific electrode. The fluoride concentrations ranged from 0.01 to 3.78 μg/ml. The fluoride content was not related to sugar content, soy bean content or the sterilization process. Among 3 brands of soy milk containing tea powder extract, the fluoride content was high (1.25 to 3.78 μg/ml). Most brands of soy milk tested in our study had fluoride content below the optimal daily intake but brands containing tea powder extract if consumed by children may increase their risk for fluorosis. PMID:27086437

  13. IMPACT OF FLUORIDE ON DENTAL HEALTH QUALITY

    PubMed Central

    Medjedovic, Eida; Medjedovic, Senad; Deljo, Dervis; Sukalo, Aziz

    2015-01-01

    Introduction: Fluoride is natural element that strengthens teeth and prevents their decay. Experts believe that the best way to prevent cavities is the use of fluoride from multiple sources. Studies even show that in some cases, fluoride can stop already started damage of the teeth. In children younger than 6 years fluoride is incorporated into the enamel of permanent teeth, making the teeth more resistant to the action of bacterial and acids in food. Goal: The aim of this study is to determine the effects of improving the health status of teeth after six months treatment with the use of topical fluoridation 0.5% NaF, and the level and quality of the impact of treatment with chemical 0.5% NaF on the dental health of children at age from 8 to 15 years, in relation to gender and chronological age. This study included school children aged 8 to 15 years who visited health and dental services dependent in Mostar. Results: It is obvious that after the implementation of treatment with 5% NaF by the method of topical fluoridation, health status of subjects from the experimental group significantly improved, so that at the final review 89.71% or 61 subjects of the experimental group had healthy (cured teeth), tooth with dental caries only 5.88% or 4 respondents tooth with dental caries and filling 4.41% or 3 respondents, extracted baby tooth 14.71% or 10 respondents, while for 13.24% of respondents was identified state with still unerupted teeth. Our findings are indirectly confirmed that the six-month treatment of fluoridation with 5% NaF, contributed to statistically significant improvement in overall oral health of the experimental group compared to the control group which was not treated by any dental treatment. Conclusion: It can be concluded that there is a statistically significant difference in the evaluated parameters of oral health of children in the control group compared to the studied parameters of oral health the experimental group of children at the final

  14. Fluoride in the environment and its metabolism in humans.

    PubMed

    Jha, Sunil Kumar; Mishra, Vinay Kumar; Sharma, Dinesh Kumar; Damodaran, Thukkaram

    2011-01-01

    The presence of environmental fluoride and its impact on human health is well documented. When consumed in adequate quantity, fluoride prevents dental caries, assists in the formation of dental enamels, and prevents deficiencies in bone mineralization. At excessive exposure levels, ingestion of fluoride causes dental fluorosis skeletal fluorosis, and manifestations such as gastrointestinal, neurological, and urinary problems. The distribution of fluoride in the environment is uneven and largely is believed to derive from geogenic causes. The natural sources of fluoride are fluorite, fluorapatite, and cryolite, whereas anthropogenic sources include coal burning, oil refining, steel production, brick-making industries, and phosphatic fertilizer plants, among others. Among the various sources of fluoride in the environment, those of anthropogenic origin have occasionally been considered to be major ones. The gourndwater is more susceptible to fluoride accumulation and contamination than are other environmental media, primarily because of its contact with geological substrates underneath. The high fluoride concentration in water usually reflects the solubility of fluoride (CaF₂). High concentrations are also often associated with soft, alkaline, and calcium-deficient waters. The fluoride compounds that occur naturally in drinking water are almost totally bioavailable (90%) and are completely absorbed from the gastrointestinal tract. As a result, drinking water is considered to be the potential source of fluoride that causes fluorosis. Because the bioavailability of fluoride is generally reduced in humans when consumed with milk or a calcium-rich diet, it is highly recommended that the inhabitants of fluoride-contaminated areas should incorporate calcium-rich foods in their routine diet. Guidelines for limiting the fluoride intake from drinking water have been postulated by various authorities. Such limits are designed to protect public health and should reflect all

  15. Water fluoridation: a critical review of the physiological effects of ingested fluoride as a public health intervention.

    PubMed

    Peckham, Stephen; Awofeso, Niyi

    2014-01-01

    Fluorine is the world's 13th most abundant element and constitutes 0.08% of the Earth crust. It has the highest electronegativity of all elements. Fluoride is widely distributed in the environment, occurring in the air, soils, rocks, and water. Although fluoride is used industrially in a fluorine compound, the manufacture of ceramics, pesticides, aerosol propellants, refrigerants, glassware, and Teflon cookware, it is a generally unwanted byproduct of aluminium, fertilizer, and iron ore manufacture. The medicinal use of fluorides for the prevention of dental caries began in January 1945 when community water supplies in Grand Rapids, United States, were fluoridated to a level of 1 ppm as a dental caries prevention measure. However, water fluoridation remains a controversial public health measure. This paper reviews the human health effects of fluoride. The authors conclude that available evidence suggests that fluoride has a potential to cause major adverse human health problems, while having only a modest dental caries prevention effect. As part of efforts to reduce hazardous fluoride ingestion, the practice of artificial water fluoridation should be reconsidered globally, while industrial safety measures need to be tightened in order to reduce unethical discharge of fluoride compounds into the environment. Public health approaches for global dental caries reduction that do not involve systemic ingestion of fluoride are urgently needed. PMID:24719570

  16. Water Fluoridation: A Critical Review of the Physiological Effects of Ingested Fluoride as a Public Health Intervention

    PubMed Central

    2014-01-01

    Fluorine is the world's 13th most abundant element and constitutes 0.08% of the Earth crust. It has the highest electronegativity of all elements. Fluoride is widely distributed in the environment, occurring in the air, soils, rocks, and water. Although fluoride is used industrially in a fluorine compound, the manufacture of ceramics, pesticides, aerosol propellants, refrigerants, glassware, and Teflon cookware, it is a generally unwanted byproduct of aluminium, fertilizer, and iron ore manufacture. The medicinal use of fluorides for the prevention of dental caries began in January 1945 when community water supplies in Grand Rapids, United States, were fluoridated to a level of 1 ppm as a dental caries prevention measure. However, water fluoridation remains a controversial public health measure. This paper reviews the human health effects of fluoride. The authors conclude that available evidence suggests that fluoride has a potential to cause major adverse human health problems, while having only a modest dental caries prevention effect. As part of efforts to reduce hazardous fluoride ingestion, the practice of artificial water fluoridation should be reconsidered globally, while industrial safety measures need to be tightened in order to reduce unethical discharge of fluoride compounds into the environment. Public health approaches for global dental caries reduction that do not involve systemic ingestion of fluoride are urgently needed. PMID:24719570

  17. Effects of flossing and rinsing with a fluoridated mouthwash after brushing with a fluoridated toothpaste on salivary fluoride clearance.

    PubMed

    Duckworth, R M; Horay, C; Huntington, E; Mehta, V

    2009-01-01

    The aims of this study were to test the hypothesis that flossing after brushing with a fluoridated toothpaste may lower salivary fluoride (F), and to evaluate the consequence of subsequent F mouthwash use. Twenty adults used 3 oral hygiene regimes in a randomised order: A, brushing with an NaF toothpaste; B, as A but followed by professional flossing; C, as B followed by rinsing with an NaF mouthwash. Saliva samples were collected up to 120 min after each regime and analysed for F. The mean area under the clearance curve value for regime C was statistically significantly greater than the corresponding values for A and B (p < 0.0001), which differed little. The regime that included the mouthwash may provide better anticaries protection. PMID:19776569

  18. Fluoride content of clay minerals and argillaceous earth materials

    USGS Publications Warehouse

    Thomas, J., Jr.; Glass, H.D.; White, W.A.; Trandel, R.M.

    1977-01-01

    A reliable method, utilizing a fluoride ion-selective electrode, is described for the determination of fluoride in clays and shales. Interference by aluminum and iron is minimal. The reproducibility of the method is about ??5% at different levels of fluoride concentration. Data are presented for various clay minerals and for the <2-??m fractions of marine and nonmarine clays and shales. Fluoride values range from 44 ppm (0.0044%) for nontronite from Colfax, WA, to 51,800 ppm (5.18%) for hectorite from Hector, CA. In general, clays formed under hydrothermal conditions are relatively high in fluoride content, provided the hydrothermal waters are high in fluoride content. Besides hectorite, dickite from Ouray, CO, was found to contain more than 50 times as much fluoride (6700 ppm) as highly crystalline geode kaolinite (125 ppm). The clay stratum immediately overlying a fluorite mineralized zone in southern Illinois was found to have a higher fluoride content than the same stratum in a nonmineralized zone approximately 1 mile away. Nonmarine shales in contact with Australian coals were found to be lower in fluoride content than were marine shales in contact with Illinois coals. It is believed that, in certain instances, peak shifts on DTA curves of similar clay minerals are the result of significant differences in their fluoride content. ?? 1977.

  19. Community water fluoridation and caries prevention: a critical review.

    PubMed

    Pizzo, Giuseppe; Piscopo, Maria R; Pizzo, Ignazio; Giuliana, Giovanna

    2007-09-01

    The aim of this paper was to critically review the current role of community water fluoridation in preventing dental caries. Original articles and reviews published in English language from January 2001 to June 2006 were selected through MEDLINE database. Other sources were taken from the references of the selected papers. For the past 50 years community water fluoridation has been considered the milestone of caries prevention and as one of the major public health measures of the 20th century. However, it is now accepted that the primary cariostatic action of fluoride occurs after tooth eruption. Moreover, the caries reduction directly attributable to water fluoridation have declined in the last decades as the use of topical fluoride had become more widespread, whereas enamel fluorosis has been reported as an emerging problem in fluoridated areas. Several studies conducted in fluoridated and nonfluoridated communities suggested that this method of delivering fluoride may be unnecessary for caries prevention, particularly in the industrialized countries where the caries level has became low. Although water fluoridation may still be a relevant public health measure in poor and disadvantaged populations, the use of topical fluoride offers an optimal opportunity to prevent caries among people living in both industrialized and developing countries. PMID:17333303

  20. A comparative study of fluoride release from two different sealants

    PubMed Central

    Ananda, Shimoga-Raju

    2014-01-01

    Objectives: The introduction of fluoride releasing sealants and glass ionomer cements as fissure sealants adds another dimension to prevention of pit and fissure caries. The ability of resin sealants and glass ionomer cements to release fluoride on a long term basis to the sealed enamel and the adjacent unsealed pit and fissure and cuspal incline enamel may allow for further reduction in pit and fissure caries experience for children. Hence, the study was conducted to compare the amount of fluoride release in the plaque after placing fluoride releasing pit and fissure sealants and glass ionomer fissure sealants used in Atraumatic Restorative Treatment (ART) approach. To compare the fluoride release of both the materials at the different time intervals. Material and Methods: A total of 60 school going children were included in this study. Before application of the sealants, baseline plaque fluoride levels were estimated from all the study subjects. After application of sealants again the same was estimated at an interval of 24 hour, 9 days, 2 weeks and 4 weeks. Results: The peak plaque fluoride levels were achieved at 24 hours after application of fissure sealants in all the groups. Conclusions: Within the limitation of the study, the present study indicated that fluoride releasing fissure sealants may act as a source of fluoride in plaque which will help in preventing pit and fissure and smooth surface caries in the tooth sealed with fissure sealants. Key words:Plaque fluoride, pit and fissures sealants, dental caries. PMID:25674315

  1. Arsenic from community water fluoridation: quantifying the effect.

    PubMed

    Peterson, Emily; Shapiro, Howard; Li, Ye; Minnery, John G; Copes, Ray

    2016-04-01

    Community water fluoridation is a WHO recommended strategy to prevent dental carries. One debated concern is that hydrofluorosilicic acid, used to fluoridate water, contains arsenic and poses a health risk. This study was undertaken to determine if fluoridation contributes to arsenic in drinking water, to estimate the amount of additional arsenic associated with fluoridation, and compare this to the National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard and estimates from other researchers. Using surveillance data from Ontario drinking water systems, mixed effects linear regression was performed to examine the effect of fluoridation status on the difference in arsenic concentration between raw water and treated water samples. On average, drinking water treatment was found to reduce arsenic levels in water in both fluoridated and non-fluoridated systems by 0.2 μg/L. However, fluoridated systems were associated with an additional 0.078 μg/L (95% CI 0.021, 0.136) of arsenic in water when compared to non-fluoridated systems (P = 0.008) while controlling for raw water arsenic concentrations, types of treatment processes, and source water type. Our estimate is consistent with concentrations expected from other research and is less than 10% of the NSF/ANSI standard of 1 μg/L arsenic in water. This study provides further information to inform decision-making regarding community water fluoridation. PMID:27105409

  2. Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

    DOEpatents

    Windt, Norman F.; Williams, Joe L.

    1983-01-01

    The invention is a process for decontaminating particulate nickel contaminated with actinide-metal fluorides. In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel containing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

  3. Fluoride ion encapsulation by Mg[superscript 2+] ions and phosphates in a fluoride riboswitch

    SciTech Connect

    Ren, Aiming; Rajashankar, Kanagalaghatta R.; Patel, Dinshaw J.

    2012-06-26

    Significant advances in our understanding of RNA architecture, folding and recognition have emerged from structure-function studies on riboswitches, non-coding RNAs whose sensing domains bind small ligands and whose adjacent expression platforms contain RNA elements involved in the control of gene regulation. We now report on the ligand-bound structure of the Thermotoga petrophila fluoride riboswitch, which adopts a higher-order RNA architecture stabilized by pseudoknot and long-range reversed Watson-Crick and Hoogsteen A {sm_bullet} U pair formation. The bound fluoride ion is encapsulated within the junctional architecture, anchored in place through direct coordination to three Mg{sup 2+} ions, which in turn are octahedrally coordinated to water molecules and five inwardly pointing backbone phosphates. Our structure of the fluoride riboswitch in the bound state shows how RNA can form a binding pocket selective for fluoride, while discriminating against larger halide ions. The T. petrophila fluoride riboswitch probably functions in gene regulation through a transcription termination mechanism.

  4. Plasma acylated and plasma unacylated ghrelin: useful new biomarkers in patients with neuroendocrine tumors?

    PubMed Central

    van Adrichem, Roxanne C S; van der Lely, Aart Jan; Huisman, Martin; Kramer, Piet; Feelders, Richard A; Delhanty, Patric J D

    2016-01-01

    To date, the value of fasting plasma acylated ghrelin (AG) and unacylated ghrelin (UAG) as potential novel biomarkers in patients with neuroendocrine tumors (NETs) is unknown. The aims of this study are to (i) compare fasting AG and UAG levels between nonobese, nondiabetic NET patients (N=28) and age- (±3 years) and sex-matched nonobese, nondiabetic controls (N=28); and (ii) study the relationship between AG, UAG, and AG/UAG ratios and biochemical (chromogranin-A (CgA) and neuron-specific enolase (NSE) levels) and clinical parameters (age at diagnosis, sex, primary tumor location, carcinoid syndrome, ENETS TNM classification, Ki-67 proliferation index, grading, prior incomplete surgery) in NET patients. Fasting venous blood samples (N=56) were collected and directly stabilized with 4-(2-aminoethyl) benzenesulfonyl fluoride hydrochloride after withdrawal. Plasma AG and UAG levels were determined by ELISA. Expression of ghrelin was examined in tumor tissue by immunohistochemistry. There were no significant differences between NET patients and controls in AG (median: 62.5 pg/mL, IQR: 33.1–112.8 vs median: 57.2pg/mL, IQR: 26.7–128.3, P=0.66) and UAG in levels (median: 76.6pg/mL, IQR: 35.23–121.7 vs median: 64.9, IQR: 27.5–93.1, P=0.44). No significant correlations were found between AG, UAG, and AG/UAG ratios versus biochemical and clinical parameters in NET patients with the exception of age at diagnosis (AG: ρ= −0.47, P=0.012; AG/UAG ratio: ρ= −0.50, P=0.007) and baseline chromogranin-A levels (AG/UAG ratio: ρ= −0.44, P=0.019). In our view, fasting plasma acylated and unacylated ghrelin appear to have no value as diagnostic biomarkers in the clinical follow-up of patients with NETs. PMID:27215920

  5. Inhibition of Endosome-Lysosome System Acidification Enhances Porcine Circovirus 2 Infection of Porcine Epithelial Cells▿

    PubMed Central

    Misinzo, Gerald; Delputte, Peter L.; Nauwynck, Hans J.

    2008-01-01

    Recently, Misinzo et al. (G. Misinzo, P. Meerts, M. Bublot, J. Mast, H. M. Weingartl, and H. J. Nauwynck, J. Gen. Virol. 86:2057-2068, 2005) reported that inhibiting endosome-lysosome system acidification reduced porcine circovirus 2 (PCV2) infection of monocytic 3D4/31 cells. The present study examined the effect of inhibiting endosome-lysosome system acidification in epithelial cells, since epithelial cells support PCV2 infection in vivo and are used in culturing PCV2 in vitro. Ammonium chloride (NH4Cl), chloroquine diphosphate (CQ), and monensin were used to inhibit endosome-lysosome system acidification. NH4Cl, CQ, or monensin increased PCV2 (Stoon-1010) infection by 726% ± 110%, 1,212% ± 34%, and 1,100% ± 179%, respectively, in porcine kidney (PK-15) cells; by 128% ± 7%, 158% ± 3%, and 142% ± 11% in swine kidney cells; by 160% ± 28%, 446% ± 50%, and 162% ± 56% in swine testicle (ST) cells; and by 313% ± 25%, 611% ± 86%, and 352% ± 44% in primary kidney epithelial cells. Similarly, increased PCV2 infection was observed with six other PCV2 strains in PK-15 cells treated with endosome-lysosome system acidification inhibitors. The mechanism behind increased PCV2 infection was further investigated in PK-15 cells using CQ. PCV2 infection of PK-15 cells was increased only when CQ was added early during PCV2 infection. CQ did not affect PCV2 virus-like particle (VLP) attachment to PK-15 cells but increased the disassembly of internalized PCV2 VLPs. In untreated PK-15 cells, internalized PCV2 VLPs localized within the endosome-lysosome system. PCV2 infection of untreated 3D4/31 and PK-15 cells and CQ-treated PK-15 cells was blocked by a serine protease inhibitor [4-(2-aminoethyl) benzenesulfonyl fluoride hydrochloride] but not by aspartyl protease (pepstatin A), cysteine protease (E-64), and metalloprotease (phosphoramidon) inhibitors. These results suggest that serine protease-mediated PCV2 disassembly is enhanced in porcine epithelial cells but inhibited

  6. Analysis of differentially expressed genes between fluoride-sensitive and fluoride-endurable individuals in midgut of silkworm, Bombyx mori.

    PubMed

    Qian, Heying; Li, Gang; He, Qingling; Zhang, Huaguang; Xu, Anying

    2016-08-15

    Fluoride tolerance is an economically important trait of silkworm. Near-isogenic lines (NILs) of the dominant endurance to fluoride (Def) gene in Bombyx mori has been constructed before. Here, we analyzed the gene expression profiles of midgut of fluoride-sensitive and fluoride-endurable individuals of Def NILs by using high-throughput Illumina sequencing technology and bioinformatics tools, and identified differentially expressed genes between these individuals. A total of 3,612,399 and 3,567,631 clean tags for the libraries of fluoride-endurable and fluoride-sensitive individuals were obtained, which corresponded to 32,933 and 43,976 distinct clean tags, respectively. Analysis of differentially expressed genes indicates that 241 genes are differentially expressed between the two libraries. Among the 241 genes, 30 are up-regulated and 211 are down-regulated in fluoride-endurable individuals. Pathway enrichment analysis demonstrates that genes related to ribosomes, pancreatic secretion, steroid biosynthesis, glutathione metabolism, steroid biosynthesis, and glycerolipid metabolism are down-regulated in fluoride-endurable individuals. qRT-PCR was conducted to confirm the results of the DGE. The present study analyzed differential expression of related genes and tried to find out whether the crucial genes were related to fluoride detoxification which might elucidate fluoride effect and provide a new way in the fluorosis research. PMID:27106117

  7. Comparison of salivary fluoride concentrations after administration of a bioadhesive slow-release tablet and a conventional fluoride tablet.

    PubMed

    Bottenberg, P; Cleymaet, R; de Muynck, C; Remon, J P; Coomans, D; Slop, D

    1992-08-01

    The in-vitro and in-vivo fluoride release of bioadhesive, slow-release tablets prepared from a mixture of polyethylene glycol polymers, containing 0.1 mg of fluoride as NaF was studied, and their ability to sustain fluoride levels in saliva were compared with conventional fluoride tablets with the same fluoride content. In-vitro release experiments showed that the bioadhesive tablets needed 8 h to release all their fluoride compared with less than 1 h for the conventional fluoride tablets. In-vivo, the bioadhesive tablets had a retention period of 6 h and could sustain a salivary fluoride level of more than 10 microM above the baseline for 7 h. The conventional fluoride tablets achieved a peak concentration of 0.5 mM directly after dissolution in the mouth, but the fluoride level could not be sustained for longer than 1 h. A good agreement was found between the in-vitro swelling behaviour of the bioadhesive tablets and their in-vitro and in-vivo release characteristics and their in-vivo retention time. PMID:1359097

  8. Fluoride release and uptake abilities of different fissure sealants

    PubMed Central

    Andenna, Gianluigi; Ceci, Matteo; Beltrami, Riccardo; Colombo, Marco; Cucca, Lucia

    2016-01-01

    Background The long-term capability of resin sealants and glass ionomer cements to release fluoride is associated to a reduction in pit and fissure caries. The regular use of fluoride varnishes/toothpastes can result in the absorption of fluoride into the sealant. The objective of the present study was to assess the fluoride release/uptake capacities of different fissure sealants. Material and Methods Three different fissure sealants (Fuji Triage/GC, Fissurit FX/Voco and Grandio Seal/Voco) were examined. Ten discs of each material were prepared. Each disc was incubated with distilled water and then the solution analyzed for diluted for fluoride concentration, using a combination of fluoride electrode (OrionGP 1 S/N 13824, Orion Research Inc, Boston, MA, USA) connected to an expandable ion analyzer (Orion 720A, Orion Research Inc, Boston, MA, USA). Standard curves between 1 and 100 ppm F- were used to calibrate the electrode. Cumulative fluoride release was measured on days 1, 2, 3, 5, 7, 21, 35 and 49, then two different fluoride varnishes/pastes (Profluorid Varnish/Voco, MI Paste Plus/GC), were applied to the sealants tested, and fluoride release (after reuptake) was measured on days 56, 70 and 84. Results Kruskal Wallis test confirmed significant differences in fluoride release between Fuji Triage/GC and Fissurit FX/Voco and Grandio Seal/Voco from day 1 (P < 0.001). The application of fluoride varnish Profluorid Varnish enhanced the fluoride release for all sealants (P < 0.05). MI Paste Plus enhanced the fluoride release for all sealants except for Fuji Triage/GC (P > 0.05). Conclusions The GIC-based sealant (Fuji Triage/GC) released significantly more fluoride than the resin sealants tested. The exposure to the fluoridated varnish (Profluorid Varnish) significantly recharged the sealants tested more than the CPP-ACPF toothpaste (MI Paste Plus). Key words:Fissure sealants, fluoride release, fluoride uptake, glass ionomer cements. PMID:27398179

  9. The Effect of Calcium Pre-Rinse on Salivary Fluoride After 900 ppm Fluoride Mouthwash: A Randomized Clinical Trial

    PubMed Central

    Ramazani, Nahid; Ahmadi, Rahil; Heidari, Zahra; Hushmandi, Arezoo

    2013-01-01

    Objective: Calcium fluoride deposit during fluoride application. Uptake and retention of fluoride by saliva depends generally on the concentration of calcium. In this study, the effect of calcium pre-rinse on salivary fluoride concentration after a 900 ppm fluoride mouthwash was investigated. Materials and Methods: This cross-over double-blind randomized clinical trial was conducted in a girls’ dormitory in Zahedan University of Medical Sciences, southeast Iran. In this study, 42 female dental students were chosen using simple randomization. During the first phase, 21 subjects (group A) used fluoride rinse (F regimen) and the remaining (group B) used calcium pre-rinse followed immediately by fluoride rinse (Ca + F regimen). In the second phase, participants rinsed using the mouthwashes not previously used. Prior to each phase prophylaxis was performed and no fluoridated product was used during a two-week interval between the phases. Salivary samples were taken immediately before (baseline), 1 and 12 hours after rinsing. The salivary fluoride concentration was determined using fluoride sensitive electrode. Repeated measures ANOVA was used for statistical analysis and the significance level was set at P<0.05. Results: There was significant difference between fluoride concentrations at different time points (P< 0.001). Significant differences were observed when the different time points of two regimens were examined. In contrast to this, the baseline before using F regimen and the baseline before using Ca + F regimen did not show any significance (P= 0.070). Conclusion: Pre-rinsing with calcium before fluoride is recommended because of significant increases in salivary fluoride concentration. PMID:24396357

  10. Production of sintered porous metal fluoride pellets

    DOEpatents

    Anderson, L.W.; Stephenson, M.J.

    1973-12-25

    Porous pellets characterized by a moderately reactive crust and a softer core of higher reactivity are produced by forming agglomerates containing a metal fluoride powder and a selected amount ofwater. The metal fluoride is selected to be sinterable and essentially non-reactive with gaseous fluorinating agents. The agglomerates are contacted with a gaseous fluorinating agent under controlled conditions whereby the heat generated by localized reaction of the agent and water is limited to values effccting bonding by localized sintering. Porous pellets composed of cryolite (Na/sub 3/AlF/sub 6/) can be used to selectively remove trace quantities of niobium pentafluoride from a feed gas consisting predominantly of uranium hexafluoride. (Official Gazette)

  11. Fluoride glass fibers: applications and prospects

    NASA Astrophysics Data System (ADS)

    Poulain, Marcel

    1998-09-01

    Fluoride glass fibers have been intensively developed for the last 20 years. A major effort was devoted to the fabrication of low loss fibers for repeaterless long haul telecommunications. This step which ended in the late eighties provided the basic technology for the manufacturing of multimode and single mode fibers with minimum losses below 10 dB/km. Such fibers area now used for various passive applications requiring the handling of IR signal. In this respect, fluoride fibers are complementary to silica fibers when wavelength exceeds 2 micrometers . Some practical set ups are operating for IR imaging, remote spectroscopy and thermometry. Special fibers such as polarization maintaining fibers have been developed for interferometric astronomy, which could also apply to sensors. UV transmission has still to be developed. Laser power delivery is another field of application for these fibers. YAG:Er laser at 2.9 micrometers attracts a growing interest for medical applications, ophthalmology and dentistry, while prospects for CO laser are positive. Active fibers are based on rare earth doped single mode fibers. They lead to the definition of numerous new laser lines and emphasized the potential of up conversion for the generation of visible light using IR pumping laser diodes. High power output has been achieved in the blue and the red light, which open prospects for compact and all solid state fiber lasers for a wide range of applications, from displays to medical uses. Optical amplification makes another field of R and D centered on telecommunication needs. Pr3+ doped fluoride fibers have been used for the 1.3 micrometers band, and Er based fluoride fiber amplifiers exhibit wider and flatter gain than those made from silica. Optical amplification may be implemented at other wavelengths for more general purposes.

  12. Effect of fluoride toothpastes on enamel demineralization

    PubMed Central

    Arnold, Wolfgang H; Dorow, Andreas; Langenhorst, Stephanie; Gintner, Zeno; Bánóczy, Jolan; Gaengler, Peter

    2006-01-01

    Background It was the aim of this study to investigate the effect of four different toothpastes with differing fluoride compounds on enamel remineralization. Methods A 3 × 3 mm window on the enamel surface of 90 human premolars was demineralized in a hydroxyethylcellulose solution at pH 4.8. The teeth were divided into 6 groups and the lower half of the window was covered with varnish serving as control. The teeth were immersed in a toothpaste slurry containing: placebo tooth paste (group 1); remineralization solution (group 2); Elmex Anticaries (group 3); Elmex Sensitive (group 4); Blend-a-med Complete (group 5) and Colgate GRF (group 6). Ten teeth of each group were used for the determination of the F- content in the superficial enamel layer and acid solubility of enamel expressed in soluble phosphorus. Of 6 teeth of each group serial sections were cut and investigated with polarization light microscopy (PLM) and quantitative energy dispersive X-ray analysis (EDX). Results The PLM results showed an increased remineralization of the lesion body in the Elmex Anticaries, Elmex Sensitive and Colgate GRF group but not in the Blend-a-med group. A statistically significant higher Ca content was found in the Elmex Anticaries group. The fluoride content in the superficial enamel layer was significantly increased in both Elmex groups and the Blend-a-med group. Phosphorus solubility was significantly decreased in both Elmex groups and the Blend-a-med group. Conclusion It can be concluded that amine fluoride compounds in toothpastes result in a clearly marked remineralization of caries like enamel lesions followed by sodium fluoride and sodium monofluorophosphate formulations. PMID:16776820

  13. Site of Fluoride Accumulation in Navel Orange Leaves 1

    PubMed Central

    Chang, Chong W.; Thompson, C. Ray

    1966-01-01

    Fluoride-polluted navel orange leaves, Citrus sinensis (Linn.) Osbeck, were fractionated into the subcellular components in hexane/carbon tetrachloride mixtures having various densities. Fluoride was determined at each fraction. Analyses were also made for the subcellular distribution of chlorophyll, nitrogen, and DNA to assess the extent of cross-contamination of each component. The fraction containing cell wall, nuclei, and partly broken cells apparently contained a major amount of fluoride. However, if allowance was made for the cross-contamination of chloroplasts and chloroplast fragments, the fraction of chloroplasts was found to be the site of the highest fluoride accumulation. When each particulate component was washed with water after drying, the combined washings contained more than 50% of the total fluoride of the isolated fractions. The usual method of subcellular fractionation with aqueous solvent shifted the major site of fluoride accumulation from the fraction of chloroplasts to that of the supernatant. PMID:5908632

  14. Necessity to review the Brazilian regulation about fluoride toothpastes

    PubMed Central

    Cury, Jaime Aparecido; Caldarelli, Pablo Guilherme; Tenuta, Livia Maria Andaló

    2015-01-01

    The aim of this study was to evaluate the adequacy of the Brazilian legislation about fluoride toothpaste. A search was conducted in LILACS, Medline and SciELO databases about the fluoride concentration found in Brazilians toothpastes, using descriptors on health. Publications since 1981 have shown that some Brazilian toothpastes are not able to maintain, during their expiration time, a minimum of 1,000 ppm F of soluble fluoride in the formulation. However, the Brazilian regulation (ANVISA, Resolution 79, August 28, 2000) only sets the maximum total fluoride (0.15%; 1,500 ppm F) that a toothpaste may contain but not the minimum concentration of soluble fluoride that it should contain to have anticaries potential, which according to systematic reviews should be 1,000 ppm F. Therefore, the Brazilian regulation on fluoride toothpastes needs to be revised to assure the efficacy of those products for caries control. PMID:26487295

  15. Necessity to review the Brazilian regulation about fluoride toothpastes.

    PubMed

    Cury, Jaime Aparecido; Caldarelli, Pablo Guilherme; Tenuta, Livia Maria Andaló

    2015-01-01

    The aim of this study was to evaluate the adequacy of the Brazilian legislation about fluoride toothpaste. A search was conducted in LILACS, Medline and SciELO databases about the fluoride concentration found in Brazilians toothpastes, using descriptors on health. Publications since 1981 have shown that some Brazilian toothpastes are not able to maintain, during their expiration time, a minimum of 1,000 ppm F of soluble fluoride in the formulation. However, the Brazilian regulation (ANVISA, Resolution 79, August 28, 2000) only sets the maximum total fluoride (0.15%; 1,500 ppm F) that a toothpaste may contain but not the minimum concentration of soluble fluoride that it should contain to have anticaries potential, which according to systematic reviews should be 1,000 ppm F. Therefore, the Brazilian regulation on fluoride toothpastes needs to be revised to assure the efficacy of those products for caries control. PMID:26487295

  16. [Problems of fluoride dosing to infants for dental fluorosis prevention].

    PubMed

    Davydov, B N; Borinskaia, E Iu; Kushnir, S M; Borinskiĭ, Iu N; Beliaev, V V

    2011-01-01

    Fluoride content in drinking water, breast milk, cow milk, additional food for newborns prepared with water containing different amount of fluoride was determined. Fluoride excretion in urine since the first days of birth and up to 4 months of postnatal development was investigated in breast and artificially fed infants. When a neonate was fed with breast milk, fluoride was received in the amount no more than 20 mkg/day. The additional food contained fluoride which water mainly had. Water with high level of fluorine increased its content in the additional food up to the values not comparable to those in breast milk that presented danger of dental fluorosis development. Data on fluorine content in drinking water were absolutely necessary to calculate daily fluorides consumption by infants and to prevent dental fluorosis. PMID:21378727

  17. Distribution of fluoride in ground water of West Virginia

    USGS Publications Warehouse

    Mathes, M.V.; Waldron, M.C.

    1993-01-01

    This report describes the results of a study by the U.S. Geological Survey, in cooperation with the West Virginia Geological and Economic Survey, to evaluate the distribution of fluoride in ground water of West Virginia. Fluoride is a natural chemical constituent in domestic and public water supplies in West Virginia. Fluoride concentrations of about 1.0 milligram per liter in drinking water are beneficial to dental health. Concentrations greater than 2.0 milligrams per liter, however, could harm teeth and bones. Fluoride concentra- tions in ground water of West Virginia range from less than 0.1 to 12 milligrams per liter. Fluoride concentrations that exceed 2.0 milligrams per liter are found in wells drilled to all depths, wells drilled in all topographic settings, and wells drilled into most geologic units. Most fluoride concentrations that exceed 2.0 milligrams per liter are located at sites clustered in the northwestern part of the State.

  18. Bone scintigraphy in fluoride treated osteoporosis

    SciTech Connect

    Froelich, J.W.; Kleerekoper, M.; Parker, D.A.

    1985-05-01

    Quantitative bone scintigraphy was performed on 23 white females with post-menopausal osteoporosis and vertebral compression fractures. These patients were then entered into a randomized, double-blind clinical trial or sodium fluoride therapy (NaF=14, placebo=9) which included repeat bone scintigraphy every six months. Scintigraphic images were acquired for 500K counts per image over the total body with computer acquisition over the posterior thoracic and lumbar spine. Images were obtained on a wide field-of-view gamma camera two hours after injecting 15 mCi of Tc-99m MDP. Data analysis showed a significant reduction in the activity ratio of abnormal vertebral body to normal vertebral body in those patients treated with sodium fluoride (paired t-test p=0.0095). No significant change was observed in the control group of (p=0.142). These results suggest that sodium fluoride therapy promotes more rapid healing of osteoporotic vertebral fractures. They also demonstrate the utility of serial quantitative bone scintigraphy in assessing osteoporotic patients with vertebral compression fractures.

  19. Effects of a documented hydrogen fluoride leak

    SciTech Connect

    Feder, W.A.

    1985-01-01

    At about 6 a.m. on June 19, 1984, 1037 liters of pressurized HF liquid escaped from a storage tank through a 2 mm diameter hole. 48 hours after the leak was discovered and sealed, visible injury to vegetation was observed 2 miles downwind of the source in a tear drop pattern. Injury symptoms ranged from a slight browning of leaves and needles to death of twigs and leaves and needles. Poplar, white pine, spruce, oak, red maple and several herbaceous plant species were injured. Ragweed was not injured but sensitive fern was severely injured. Goldenrod was also injured but recovered within 3 weeks after exposure. White pine trees within 1/4 of a mile from the source were killed. Fluoride analysis of tissues from upwind and downwind trees and herbaceous plants revealed fluoride tissue levels ranging from 5 to 34,000 ppm. Examples of distance/concentration are given. Soils revealed fluoride levels of about 1 ppm at all locations.

  20. Density and surface tension of melts of zirconium and hafnium fluorides with lithium fluoride

    SciTech Connect

    Katyshev, S.F.; Artemov, V.V.; Desyatnik, V.N.

    1988-06-01

    A study was conducted to determine the temperature dependence of the density and surface tension of melts of LiF-ZrF/sub 4/ and LiF-HfF/sub 4/. Density and surface tension were determined by the method of maximum pressure in an argon bubble. On the basis of experimental data over the entire concentration range the molar volumes and their relative deviations from the additive molar volumes were calculated for 1100/sup 0/K. The positive deviations of the molar volumes from additivity in the LiF-HfF/sub 4/ system (22.45%) were greater than in the LiF-ZrF/sub 4/ system (15.75%). This indicated that the reaction with lithium fluoride is intensified with the switch to the hafnium fluoride. Results also demonstrated that the fluorides are surface-active components in the molten mixtures.

  1. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.202 Section... Industry: Wet-Process Phosphoric Acid Plants § 60.202 Standard for fluorides. (a) On and after the date on... facility any gases which contain total fluorides in excess of 10.0 g/Mg of equivalent P2O5 feed (0.020...

  2. Fluoride use in caries prevention in the primary care setting.

    PubMed

    Clark, Melinda B; Slayton, Rebecca L

    2014-09-01

    Dental caries remains the most common chronic disease of childhood in the United States. Caries is a largely preventable condition, and fluoride has proven effectiveness in the prevention of caries. The goals of this clinical report are to clarify the use of available fluoride modalities for caries prevention in the primary care setting and to assist pediatricians in using fluoride to achieve maximum protection against dental caries while minimizing the likelihood of enamel fluorosis. PMID:25157014

  3. Urinary fluoride as an exposure index in aluminum smelting.

    PubMed

    Seixas, N S; Cohen, M; Zevenbergen, B; Cotey, M; Carter, S; Kaufman, J

    2000-01-01

    Urinary fluoride was evaluated as an exposure index for a prospective study of asthma in an aluminum smelter. Two studies were conducted to evaluate the relationship between airborne exposure and urinary excretion over a workweek, and to describe exposures among jobs and over time. Thirty-two subjects were evaluated on Days 1 and 3 of a 3-day workweek. On each day, spot urine samples were collected prior to the start of work and again at the end of the shift. Samples were analyzed for fluoride and expressed as milligrams fluoride per gram of creatinine. Airborne exposures to total particulate, fluoride particulate, and hydrogen fluoride (HF; using a 37-mm filter cassette containing a filter and treated back-up pad) were also evaluated on each subject. In the second study, postshift urine samples were collected from asthma study volunteers in three surveys extending over 1.5 years and analyzed for fluoride. Average airborne exposures were 15.7, 4.1, and 0.7 mg/m3 for particulates, particulate fluorides and HF, respectively, and were substantially higher among carbon setters than other workers. However, average urine fluorides among the same workers were reasonably low, 1.3 and 3.0 mg/g creatinine in pre- and postshift urine samples, respectively. Carbon setters, who routinely wore respiratory protection during high exposure periods, had urinary fluoride levels similar to those of other potroom personnel. A significant variation in dose, as expressed by postshift urinary fluoride levels, was observed between potroom and nonpotroom jobs and over three survey periods. These results suggest that postshift urinary fluorides provide a reasonable exposure index for surveillance of exposure levels for an epidemiologic study, and that a substantial variation of exposure occurs between jobs and over time. Although urinary fluorides may be used for exposure surveillance, additional details on individual exposure agents and patterns of exposure over time are required for

  4. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.192 Section... Plants § 60.192 Standard for fluorides. (a) On and after the date on which the initial performance test... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of...

  5. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.202 Section... Industry: Wet-Process Phosphoric Acid Plants § 60.202 Standard for fluorides. (a) On and after the date on... facility any gases which contain total fluorides in excess of 10.0 g/Mg of equivalent P2O5 feed (0.020...

  6. Cochrane reviews on the benefits/risks of fluoride toothpastes.

    PubMed

    Wong, M C M; Clarkson, J; Glenny, A-M; Lo, E C M; Marinho, V C C; Tsang, B W K; Walsh, T; Worthington, H V

    2011-05-01

    This concise review presents two Cochrane Reviews undertaken to determine: (1) the relative effectiveness of fluoride toothpastes of different concentrations in preventing dental caries in children and adolescents; and (2) the relationship between the use of topical fluorides in young children and their risk of developing dental fluorosis. To determine the relative effectiveness of fluoride toothpastes of different concentrations, we undertook a network meta-analysis utilizing both direct and indirect comparisons from randomized controlled trials (RCTs). The review examining fluorosis included evidence from experimental and observational studies. The findings of the reviews confirm the benefits of using fluoride toothpaste, when compared with placebo, in preventing caries in children and adolescents, but only significantly for fluoride concentrations of 1000 ppm and above. The relative caries-preventive effects of fluoride toothpastes of different concentrations increase with higher fluoride concentration. However, there is weak, unreliable evidence that starting the use of fluoride toothpaste in children under 12 months of age may be associated with an increased risk of fluorosis. The decision of what fluoride levels to use for children under 6 years should be balanced between the risk of developing dental caries and that of mild fluorosis. PMID:21248357

  7. The dentist’s role in promoting community water fluoridation

    PubMed Central

    Melbye, Molly L.R.; Armfield, Jason M.

    2013-01-01

    Background and Overview Community water fluoridation is an important public health intervention that reduces oral health disparities and increases the health of the population. Promotion of its safety and effectiveness is critical to maintaining its widespread acceptance and ensuring its continued use. Dentists are a potentially important source of knowledge regarding the oral health benefits and safety of water fluoridation. However, few dentists regularly discuss fluorides, and water fluoridation in particular, with patients. The authors aim to describe and discuss the role and importance of dentists’ promotion of public water fluoridation, barriers to dentists’ involvement and some approaches that might influence dentists to promote water fluoridation more actively. Conclusions and Practice Implications Ongoing promotion of fluoridation by dentists is a key factor in ensuring sustained municipal water fluoridation. However, current undergraduate dental curricula do not adequately prepare dentists for this role, and continuing dental education may be insufficient to change clinical practice. Although smoking-cessation literature can shed some light on how to proceed, changing dentists’ practice behavior remains a largely unstudied topic. Dental associations are a key resource for dentists, providing information that can assist them in becoming advocates for water fluoridation. PMID:23283928

  8. Aluminum fluoride inhibition of glucocorticoid receptor inactivation and transformation

    SciTech Connect

    Housley, P.R. )

    1990-04-10

    Fluoride, in the presence of aluminum ions, reversibly inhibits the temperature-mediated inactivation of unoccupied glucocorticoid receptors in cytosol preparations from mouse L cells. The effect is concentration-dependent, with virtually complete stabilization of specific glucocorticoid-binding capacity at 2 mM fluoride and 100 microM aluminum. These concentrations of aluminum and fluoride are ineffective when used separately. Aluminum fluoride also stabilizes receptors toward inactivation by gel filtration and ammonium sulfate precipitation. Aluminum fluoride prevents temperature-dependent transformation of steroid-receptor complexes to the DNA-binding state. Aluminum fluoride does not inhibit calf intestine alkaline phosphatase, and unoccupied receptors inactivated by this enzyme in the presence of aluminum fluoride can be completely reactivated by dithiothreitol. The effects of aluminum fluoride are due to stabilization of the complex between the glucocorticoid receptor and the 90-kDa mammalian heat-shock protein hsp90, which suggests that aluminum fluoride interacts directly with the receptor. Endogenous thermal inactivation of receptors in cytosol is not accompanied by receptor dephosphorylation. However, inactivation is correlated with dissociation of hsp90 from the unoccupied receptor. These results support the proposal that hsp90 is required for the receptor to bind steroid and dissociation of hsp90 is sufficient to inactivate the unoccupied receptor.

  9. Mechanistic aspects of the interactions between fluoride and dental enamel.

    PubMed

    ten Cate, J M; Featherstone, J D

    1991-01-01

    For many years after the discovery of its caries preventive effect, fluoride was thought to be primarily active by lowering the solubility of the apatitic mineral phase of the dental hard tissues. Recent findings have shed new light on the mechanisms by which fluoride inhibits or delays dental caries. Fluoride present in the oral fluids alters the rate of the naturally occurring dissolution and reprecipitation processes at the tooth-oral fluid interface. Demineralization of enamel is inhibited by concentrations of fluoride in the sub-ppm range. Likewise, remineralization of incipient caries lesions (the earliest stage of enamel caries) is accelerated by trace amounts of fluoride. As these two processes comprise dental caries the physiological balance between hard tissue breakdown and repair is favorably shifted by fluoride. The driving force for both phenomena is thermodynamic, that is, fluorapatite or a fluoridated hydroxyapatite may form when fluoride is supplied at low concentrations. This article critically reviews the current information about tooth-fluoride interactions, both from laboratory and clinical studies. PMID:1892991

  10. Determination of fluoride in the bottled drinking waters in iran.

    PubMed

    Amanlou, Massoud; Hosseinpour, Maedeh; Azizian, Homa; Khoshayand, Mohammad Reza; Navabpoor, Mojtaba; Souri, Effat

    2010-01-01

    Fluoride is recognized as an effective agent for dental caries prevention. Generally, the main source of fluoride intake is drinking water. In this study, fluoride content in 18 commercial brands of bottled waters was investigated. Six samples from each batch of 18 Iranian commercial brands of bottled waters were supplied. The fluoride content of samples was analyzed by Fluoride Ion Selective Electrode. The mean ± SD fluoride content of the bottled waters was 0.202 ± 0.00152 mg/L with a range from 0.039 to 0.628 mg/L which was lower than the accepted limits for fluoride content of drinking water (1 mg/L). This finding suggested that in the region which water has high fluoride content, drinking bottled water is preferred to drinking tap water, as it could lower the risk of fluorosis. However, the risk of dental caries increases in people who mainly drink bottled waters; thus, they should use fluoride supplements. PMID:24363704

  11. Examination of Liquid Fluoride Salt Heat Transfer

    SciTech Connect

    Yoder Jr, Graydon L

    2014-01-01

    The need for high efficiency power conversion and energy transport systems is increasing as world energy use continues to increase, petroleum supplies decrease, and global warming concerns become more prevalent. There are few heat transport fluids capable of operating above about 600oC that do not require operation at extremely high pressures. Liquid fluoride salts are an exception to that limitation. Fluoride salts have very high boiling points, can operate at high temperatures and low pressures and have very good heat transfer properties. They have been proposed as coolants for next generation fission reactor systems, as coolants for fusion reactor blankets, and as thermal storage media for solar power systems. In each case, these salts are used to either extract or deliver heat through heat exchange equipment, and in order to design this equipment, liquid salt heat transfer must be predicted. This paper discusses the heat transfer characteristics of liquid fluoride salts. Historically, heat transfer in fluoride salts has been assumed to be consistent with that of conventional fluids (air, water, etc.), and correlations used for predicting heat transfer performance of all fluoride salts have been the same or similar to those used for water conventional fluids an, water, etc). A review of existing liquid salt heat transfer data is presented, summarized, and evaluated on a consistent basis. Less than 10 experimental data sets have been found in the literature, with varying degrees of experimental detail and measured parameters provided. The data has been digitized and a limited database has been assembled and compared to existing heat transfer correlations. Results vary as well, with some data sets following traditional correlations; in others the comparisons are less conclusive. This is especially the case for less common salt/materials combinations, and suggests that additional heat transfer data may be needed when using specific salt eutectics in heat transfer

  12. Novel fluorogenic probe for fluoride ion based on the fluoride-induced cleavage of tert-butyldimethylsilyl ether

    NASA Astrophysics Data System (ADS)

    Yang, Xiao-Feng

    2007-06-01

    A highly sensitive and selective fluorogenic probe for fluoride ion, 4-methylumbelliferyl tert-butyldimethylsilyl ether (4-MUTBS), was designed and synthesized. 4-MUTBS was a weakly fluorescent compound and was synthesized via the one-step reaction of 4-MU with tert-butyldimethylsilyl chloride. Upon incubation with fluoride ion in acetone-water solution (7:3, v/v), the Si-O bond of 4-MUTBS was cleaved and highly fluorescent 4-methylumbelliferone (4-MU) was released, hence leading to the fluorescence increase of the reaction solution. The fluorescence increase is linearly with fluoride concentration in the range 50-8000 nmol l -1 with a detection limit of 19 nmol l -1 (3 σ). Because of the high affinity of silicon toward fluoride ion, the proposed probe shows excellent selectivity toward fluoride ion over other anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.

  13. Cariostatic effect of fluoride-containing restorative materials associated with fluoride gels on root dentin

    PubMed Central

    BORGES, Fernanda Tavares; CAMPOS, Wagner Reis da Costa; MUNARI, Lais Sant'ana; MOREIRA, Allyson Nogueira; PAIVA, Saul Martins; MAGALHÃES, Claudia Silami

    2010-01-01

    Secondary caries is still the main cause of restoration replacement, especially on the root surface Objective This in vitro study evaluated the cariostatic effects of fluoride-containing restorative materials associated with fluoride gels, on root dentin. Materials and Methods A randomized complete block design was used to test the effects of the restorative systems, fluoride regimes and the interactions among them at different distances from restoration margins. Standardized cavities were prepared on 240 bovine root specimens and randomly assigned to 15 groups of treatments (n=16). Cavities were filled with the following restorative materials: Ketac-Fil (3M-ESPE); Vitremer (3M-ESPE); Dyract/Prime & Bond NT (Dentsply); Charisma/Gluma One Bond (Heraeus Kulzer) and the control, Z250/Single Bond (3M-ESPE). The specimens were subjected to a pH-cycling model designed to simulate highcaries activity. During the cycles, 1.23% acidulated phosphate fluoride, 2.0% neutral sodium fluoride or deionized/distilled water (control) was applied to the specimens for 4 min. The surface Knoop microhardness test was performed before (KHNi) and after (KHNf) the pH cycles at 100, 200 and 300 mm from the margins. Dentin microhardness loss was represented by the difference in initial and final values (KHNi - KHNf). Data were analyzed by Friedman's and Wilcoxon's tests, ANOVA and Tukey's test (α=5%). Results The interaction of restorative systems and topical treatments was not significant (p=0.102). Dentin microhardness loss was lowest closer to the restoration. Ketac-fil presented the highest cariostatic effect. Vitremer presented a moderate effect, while Dyract and Charisma did not differ from the control, Z250. The effects of neutral and acidulated fluoride gels were similar to each other and higher than the control. Conclusion Conventional and resin-modified glass ionomer cements as well as neutral and acidulated fluoride gels inhibit the progression of artificial caries adjacent to

  14. A study to investigate fluoride contamination and fluoride exposure dose assessment in lateritic zones of West Bengal, India.

    PubMed

    Samal, Alok C; Bhattacharya, Piyal; Mallick, Anusaya; Ali, Md Motakabber; Pyne, Jagadish; Santra, Subhas C

    2015-04-01

    To assess the status of severity of fluoride contamination in lateritic Bankura and Purulia districts of West Bengal, concentrations of fluoride in different water sources and agricultural field soils were investigated. The fluoride content (mg/l) was observed to differ with aquifer depths: 0.19-0.47 in dug wells, 0.01-0.17 in shallow tube wells, and 0.07-1.6 in deep tube wells. Fluoride within the World Health Organization (WHO) prescribed range (1.0-1.5 mg/l) was estimated only in ~17% of the total collected water samples while ~67% showed <0.7 mg/l fluoride and thus may impede in the production and maintenance of healthy teeth and bones of the residents, especially children. Fluoride in water was found to be significantly correlated (r = 0.63) with pH. The exposure dose of fluoride (mg/kg/day) from drinking water in infants, children, and adults was estimated in the ranges 0.02-0.53, 0.01-0.24, and 0.01-0.14, respectively against the standard value of 0.05. A clear risk of dental fluorosis is apparent in infants and children of the study area. The fluoride in soil (55-399 mg/kg) was detected to be significantly correlated with the fluoride content in deep tube wells and soil pH (r = 0.56 and 0.71, respectively). The relationships of soil fluoride with total hardness and that with phosphate were not significant. There is a high possibility of bioaccumulation of fluoride from contaminated soil and water of the study area to cultivated crops. This will enhance the quantity of fluoride intake into human food chain in addition to drinking water pathway. PMID:25408071

  15. Determination of Fluoride in Toothpaste Using an Ion-Selective Electrode

    ERIC Educational Resources Information Center

    Light, Truman S.; Cappuccino, Carleton C.

    1975-01-01

    Outlines the theory of chemical potentiometry, describes the experimental procedure for free fluoride determination, and presents sample data of fluoride concentration for various brands of toothpaste. (GS)

  16. Effect of brushing on fluoride release from 3 bracket adhesives.

    PubMed

    Staley, Robert N; Mack, Steven J; Wefel, James S; Vargas, Marcos A; Jakobsen, Jane R

    2004-09-01

    The purpose of this in vitro study was to compare fluoride ion release from 3 orthodontic bracket adhesives with and without brushing the bracketed teeth with a fluoridated dentifrice. The bracket adhesives included a light-cured composite resin (Transbond; 3M Unitek, Monrovia, Calif), a fluoride-releasing composite resin (Advance; L D Caulk Division, Dentsply International, Milford, Del), and a resin-modified glass ionomer (Fuji Ortho LC; GC America, Alsip, Ill). The teeth in the control group were not bonded with brackets. Sixty extracted human teeth were randomly assigned to 6 groups of 10 each: (1) Transbond, brushed; (2) Advance, brushed; (3) Advance, not brushed; (4) Fuji, brushed; (5) Fuji, not brushed; and (6) control, brushed. After bonding, each tooth was placed in a sealed plastic test tube containing 4 ml of deionized water. The toothpaste used in brushing contained 0.15% weight per volume sodium fluoride, 1500 parts per million parts fluoride (Winter-fresh gel; Colgate-Palmolive Co., New York, NY). Brushing began 24 hours after the teeth were bonded and placed in deionized water. After brushing, the teeth were thoroughly rinsed with deionized water and returned to a sealed test tube. Fluoride measurements were taken before brushing began, at intervals of 72 hours for 22 days, and 90 and 93 days after bonding. Findings included: (1) brushing significantly increased the release of fluoride ions from the teeth in the composite resin and control groups, (2) the enamel crowns of the unbonded control teeth absorbed and re-released a substantial amount of fluoride ions obtained from the toothpaste, (3) the brushed group of teeth bonded with the fluoride-releasing composite resin released significantly more fluoride on the last 4 days that measurements were taken after brushing than the nonbrushed group bonded with the same adhesive, (4) the brushed group of teeth bonded with the resin-modified glass ionomer released significantly more fluoride on the last 4

  17. Total Fluoride Intake by Children from a Tropical Brazilian City.

    PubMed

    Lima, Carolina V; Cury, Jaime A; Vale, Glauber C; Lima, Marina D M; Moura, Lúcia de Fátima A D; Moura, Marcoeli Silva de

    2015-01-01

    The main sources of fluoride intake by children are fluoridated water and toothpaste. Little has been studied regarding fluoride intake from these sources in regions with tropical climates and high temperatures throughout the year. This study aimed to determine the amount of fluoride ingested from diet and tooth brushing by children who live in a city with a tropical climate. Sixty-seven children from Teresina, Piauí, Brazil, took part in this study. The city's water supply was optimally fluoridated. The duplicate-diet method was used to determine the fluoride intake from diet. The intake of fluoride from dentifrice was determined by subtracting the amount of fluoride placed on the toothbrush and that recovered after brushing. The concentration of fluoride was measured using an ion-specific electrode and is expressed as milligrams/kilogram of body weight/day. The mean (±SD) total amount was 0.071 ± 0.036 mg F/kg body weight/day, and the relative contributions of diet and toothpaste were 0.025 ± 0.010 and 0.046 ± 0.035, respectively. The factors associated with fluoride intake from toothpaste were: use of children's toothpaste (p = 0.003), use of large amounts of toothpaste (p < 0.001), and a high frequency of tooth brushing (p = 0.003). Sixty-four percent of children had an intake of less than 0.07 mg F/kg body weight/day, which is considered the upper limit for an aesthetically tolerable fluorosis risk. The results suggest that the amount of fluoride ingested by most children who live in a Brazilian city with a tropical climate is considered safe in terms of the risk of dental fluorosis. PMID:26655142

  18. Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

    DOEpatents

    Windt, N.F.; Williams, J.L.

    In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel contianing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

  19. CAN FLUORIDATION AFFECT LEAD (II) IN POTABLE WATER? HEXAFLUOROSILICATE AND FLUORIDE EQUILIBRIA IN AQUEOUS SOLUTION

    EPA Science Inventory

    Recent reports have attempted to show that fluoridating potable water is linked to increased levels of lead(II) in the blood. We examine these claims in light of the established science and critically evaluate their significance. The completeness of hexafluorosilicate hydrolysi...

  20. A simple and colorimetric fluoride receptor and its fluoride-responsive organogel.

    PubMed

    Yu, Xudong; Li, Yajuan; Yin, Yaobing; Yu, Decai

    2012-08-01

    In this paper, a new p-nitrophenylhydrozine-based anion receptor 1 containing cholesterol group had been designed and synthesized. It could selectively recognize fluoride among different anions tested with color changes from pale yellow to red for visual detection. Simultaneously, it could gel in cyclohexane, and the gel was also fluoride-responsive. When treated with TBAF (tetra-n-butylammonium fluoride), the gel could undergo gel-sol transition accompanied by color, morphology and surface changes. The binding mechanism had been investigated by UV-vis and (1)HNMR (proton nuclear magnetic resonance spectra) titrations. From SEM (scanning electron microscope), SAXS (small-angle X-ray scattering), IR (Infrared Spectroscopy) and CA (contact angle) experiments, it was indicated that the addition of F(-) could destroy the molecule assembly of host 1 in the gel state, thus resulting in the gel-to-sol transition due to the binding site competition effect. To the best of our knowledge, this was the simplest fluoride-responsive organogel with high selectivity. PMID:24364979

  1. Optical Restoration of Lead Fluoride Crystals

    SciTech Connect

    Spilker, A.; Cole, P. L.; Forest, T. A.; Mestari, M.; Naeem, S.; LeBaron, N.; Bertin, P.; Camacho, C. Munoz; Roche, J.

    2009-03-10

    Due to its relatively high resistance to high radiation, lead fluoride (PbF{sub 2}) crystals are becoming an increasingly popular material of choice for electromagnetic calorimetry, such as for experiments requiring the measurement of high-energy photons in Hall A of Jefferson Lab. For our studies we irradiated the PbF{sub 2} crystals using an electron linear accelerator (LINAC) followed by exposing the crystals to blue light so as to restore the nominal optical properties. This technique of optical bleaching with blue light affords an efficient and low-cost means for reversing the deleterious effects of optical transmission loss in radiation-damaged lead fluoride crystals. Whereas earlier experiments irradiated the PbF{sub 2} samples with 1.1 and 1.3 MeV gammas from {sup 60}Co, we used pulsed beams of energetic electrons from the tunable 25-MeV LINAC at Idaho Accelerator Center of Idaho State University in Pocatello, Idaho. A 20-MeV beam of electrons was targeted onto four separate 19 cm length samples of lead fluoride over periods of 1, 2, and 4 hours yielding doses between 7 kGy and 35 kGy. Samples were then bleached with blue light of wavelength 410-450 nm for periods between 19.5 and 24 hours. We performed this process twice - radiation, bleaching, radiation, and then followed by bleaching again - for each of these four PbF{sub 2} samples. We shall discuss the efficacy of blue light curing on samples that have undergone two cycles of electron irradiation and optical bleaching.

  2. A health risk assessment for fluoride in Central Europe.

    PubMed

    Fordyce, F M; Vrana, K; Zhovinsky, E; Povoroznuk, V; Toth, G; Hope, B C; Iljinsky, U; Baker, J

    2007-04-01

    Like many elements, fluorine (which generally occurs in nature as fluoride) is beneficial to human health in trace amounts, but can be toxic in excess. The links between low intakes of fluoride and dental protection are well known; however, fluoride is a powerful calcium-seeking element and can interfere with the calcified structure of bones and teeth in the human body at higher concentrations causing dental or skeletal fluorosis. One of the main exposure routes is via drinking water and the World Health Organisation currently sets water quality guidelines for the element. In Central Europe, groundwater resources that exceed the guideline value of 1.5 mg l-1 are widespread and effects on health of high fluoride in water have been reported. The aim of the current project was to develop a geographic information system (GIS) to aid the identification of areas where high-fluoride waters and fluorosis may be a problem; hence, where water treatment technologies should be targeted. The development of the GIS was based upon the collation and digitisation of existing information relevant to fluoride risk in Ukraine, Moldova, Hungary and Slovakia assembled for the first time in a readily accessible form. In addition, geochemistry and health studies to examine in more detail the relationships between high-fluoride drinking waters and health effects in the population were carried out in Moldova and Ukraine demonstrating dental fluorosis prevalence rates of 60-90% in adolescents consuming water containing 2-7 mg l-1 fluoride. PMID:17256094

  3. REVIEWS OF THE ENVIRONMENTAL EFFECTS OF POLLUTANTS: IX. FLUORIDE

    EPA Science Inventory

    This document is a review of the scientific literature on the biological and environmental effects of fluoride. Included in the review are a general summary and a comprehensive discussion of the following topics as related to fluoride and specific fluorine-containing compounds: p...

  4. Applications Of Graphite Fluoride Fibers In Outer Space

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheng; Long, Martin; Dever, Therese

    1993-01-01

    Report characterizes graphite fluoride fibers made from commercially available graphitized carbon fibers and discusses some potential applications of graphite fluoride fibers in outer space. Applications include heat-sinking printed-circuit boards, solar concentrators, and absorption of radar waves. Other applications based on exploitation of increased resistance to degradation by atomic oxygen, present in low orbits around Earth.

  5. 7 CFR 305.8 - Sulfuryl fluoride treatment schedules.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Sulfuryl fluoride treatment schedules. 305.8 Section 305.8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH... fluoride treatment schedules. Treatment schedule Pressure Temperature ( °F) Dosage rate(lb/1000 cubic...

  6. Fluoride Analysis. Training Module 5.200.2.77.

    ERIC Educational Resources Information Center

    Kirkwood Community Coll., Cedar Rapids, IA.

    This document is an instructional module package prepared in objective form for use by an instructor familiar with fluoride analysis procedures. Included are objectives, an instructor guide, student handouts, and a list of reference material. This module considers the determination of fluoride in water supplies using the SPANDS and electrode…

  7. Methods of controlling hydrogen fluoride pressure during chemical fabrication processes

    SciTech Connect

    Solovyov, Vyacheslav; Wiesmann, Harold

    2009-11-24

    The present invention is a method for producing a crystalline end-product. The method comprising exposing a fluoride-containing precursor to a hydrogen fluoride absorber under conditions suitable for the conversion of the precursor into the crystalline end-product.

  8. Fluoride and children's intelligence: a meta-analysis.

    PubMed

    Tang, Qin-Qing; Du, Jun; Ma, Heng-Hui; Jiang, Shao-Jun; Zhou, Xiao-Jun

    2008-01-01

    This paper presents a systematic review of the literature concerning fluoride that was carried out to investigate whether fluoride exposure increases the risk of low intelligence quotient (IQ) in China over the past 20 years. MEDLINE, SCI, and CNKI search were organized for all documents published, in English and Chinese, between 1988 and 2008 using the following keywords: fluorosis, fluoride, intelligence, and IQ. Further search was undertaken in the website www.fluorideresearch.org because this is a professional website concerning research on fluoride. Sixteen case-control studies that assessed the development of low IQ in children who had been exposed to fluoride earlier in their life were included in this review. A qualitative review of the studies found a consistent and strong association between the exposure to fluoride and low IQ. The meta-analyses of the case-control studies estimated that the odds ratio of IQ in endemic fluoride areas compared with nonfluoride areas or slight fluoride areas. The summarized weighted mean difference is -4.97 (95%confidence interval [CI] = -5.58 to -4.36; p < 0.01) using a fixed-effect model and -5.03 (95%CI = -6.51 to 3.55; p < 0.01) using a random-effect model, which means that children who live in a fluorosis area have five times higher odds of developing low IQ than those who live in a nonfluorosis area or a slight fluorosis area. PMID:18695947

  9. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  10. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  11. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  12. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  13. PILOT STUDY OF FLUORIDE AND ARSENIC REMOVAL FROM POTABLE WATER

    EPA Science Inventory

    Pilot plant studies were conducted on the removal of fluoride and arsenic from potable water using activated alumina as the adsorbent. The tests were run using water from the community of Why, Arizona, that contained 3 mg/L fluoride and 0.15 mg/L arsenic. The experimental data sh...

  14. Preparation of thin film silver fluoride electrodes from constituent elements

    NASA Technical Reports Server (NTRS)

    Odonnell, P. M.

    1972-01-01

    The feasibility of preparing thin-film metal fluoride electrodes from the elemental constituents has been demonstrated. Silver fluoride cathodes were prepared by deposition of silver on a conducting graphite substrate followed by fluorination under controlled conditions using elemental fluorine. The resulting electrodes were of high purity, and the variables such as size, shape, and thickness were easily controlled.

  15. Preparation of high purity copper fluoride by fluorinating copper hydroxyfluoride

    NASA Technical Reports Server (NTRS)

    King, R. B.; Lundquist, J. R.

    1969-01-01

    Copper fluoride containing no more than 50 ppm of any contaminating element was prepared by the fluorination of copper hydroxyfluoride. The impurity content was obtained by spark source mass spectrometry. High purity copper fluoride is needed as a cathode material for high energy density batteries.

  16. Carbide-fluoride-silver self-lubricating composite

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E. (Inventor)

    1987-01-01

    A self-lubricating, friction and wear reducing composite material is described for use over a wide temperature spectrum from cryogenic temperature to about 900 C in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  17. Carbide/fluoride/silver self-lubricating composite

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E. (Inventor)

    1988-01-01

    A self-lubricating, friction and wear reducing composite material for use over a wide temperature spectrum from cryogenic temperature to about 900.degree. C. in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  18. Hydrolysis of iron and chromium fluorides: mechanism and kinetics.

    PubMed

    Gálvez, José L; Dufour, Javier; Negro, Carlos; López-Mateos, Federico

    2008-06-15

    Fluoride complexes of metallic ions are one of the main problems when processing industrial effluents with high content of fluoride anion. The most important case is derived from pickling treatment of stainless steel, which is performed with HNO3/HF mixtures to remove oxides scale formed over the metal surface. Waste from this process, spent pickling liquor, must be treated for recovering metallic and acid content. Conventional treatments produce a final effluent with high quantity of fluoride complexes of iron and chromium. This work proposes a hydrolysis treatment of these solid metal fluorides by reacting them with a basic agent. Metal oxides are obtained, while fluoride is released to solution as a solved salt, which can be easily recovered as hydrofluoric acid. Solid iron and chromium fluorides, mainly K2FeF5(s) and CrF3(s), obtained in the UCM treatment process, were employed in this work. Optimal hydrolysis operating conditions were obtained by means of a factorial design: media must be basic but pH cannot be higher than 9.5, temperature from 40 to 70 degrees C and alkali concentration (potassium hydroxide) below 1.1 mol L(-1). Secondary reactions have been detected, which are probably due to fluoride adsorption onto obtained oxides surface. Mechanism of reaction consists of several stages, involving solid fluoride dissolution and complexes decomposition. Hydrolysis kinetics has been modeled with classical crystal dissolution kinetics, based on mass transfer phenomena. PMID:17988794

  19. Fluoride exposure and childhood osteosarcoma: a case-control study.

    PubMed Central

    Gelberg, K H; Fitzgerald, E F; Hwang, S A; Dubrow, R

    1995-01-01

    OBJECTIVES. This study tests the hypothesis that fluoride exposure in a nonoccupational setting is a risk factor for childhood osteosarcoma. METHODS. A population-based case-control study was conducted among residents of New York State, excluding New York City. Case subjects (n = 130) were diagnosed with osteosarcoma between 1978 and 1988, at age 24 years or younger. Control subjects were matched to case subjects on year of birth and sex. Exposure information was obtained by a telephone interview with the subject, parent, or both. RESULTS. Based on the parents' responses, total lifetime fluoride exposure was not significantly associated with osteosarcoma among all subjects combined or among females. However, a significant protective trend was observed among males. Protective trends were observed for fluoridated toothpaste, fluoride tablets, and dental fluoride treatments among all subjects and among males. Based on the subjects' responses, no significant associations between fluoride exposure and osteosarcoma were observed. CONCLUSIONS. Fluoride exposure does not increase the risk of osteosarcoma and may be protective in males. The protective effect may not be directly due to fluoride exposure but to other factors associated with good dental hygiene. There is also biologic plausibility for a protective effect. PMID:7503344

  20. Ionometric determination of fluorides at low temperatures

    SciTech Connect

    Kostyukova, I.S.; Ennan, A.A.; Dzerzhko, E.K.; Leivikova, A.A.

    1995-12-01

    A method for determining fluoride ions in solution at low temperatures using a solid-contact fluorine-selective electrode (FSE) has been developed. The effect of temperature (60 to -15{degrees}C) on the calibration slope, potential equilibrium time, and operational stability is studied; the effect of an organic additive (cryoprotector) on the calibration slope is also studied. The temperature relationships obtained for the solid-contact FSEs allow appropriate corrections to be applied to the operational algorithm of the {open_quotes}Ftoring{close_quotes} hand-held semiautomatic HF gas analyzer for the operational temperature range of -16 to 60{degrees}C.

  1. Fluoride content in caffeinated, decaffeinated and herbal teas.

    PubMed

    Chan, J T; Koh, S H

    1996-01-01

    The fluoride contents of infusions prepared from 44 different brands and types of teas were measured. Fluoride concentrations ranged from 0.34 to 3.71 ppm (mean = 1.50 ppm) in caffeinated tea infusions, 0.02-0.14 ppm (mean = 0.05 ppm) in herbal tea infusions, and 1.01-5.20 ppm (mean = 3.19) in decaffeinated tea infusions. This is the first report of the fluoride content of decaffeinated teas. The mean fluoride content of decaffeinated tea infusions is significantly (p < 0.01) higher than the corresponding caffeinated tea. The use of mineral water containing a naturally high fluoride level during the process of decaffeination is the most likely explanation of the above observation. PMID:8850589

  2. Survey of fluoride levels in vended water stations.

    PubMed

    Jadav, Urvi G; Archarya, Bhavini S; Velasquez, Gisela M; Vance, Bradley J; Tate, Robert H; Quock, Ryan L

    2014-01-01

    This study sought to measure the fluoride concentration of water derived from vended water stations (VWS) and to identify its clinical implications, especially with regard to caries prevention and fluorosis. VWS and corresponding tap water samples were collected from 34 unique postal zip codes; samples were analyzed in duplicate for fluoride concentration. Average fluoride concentration in VWS water was significantly lower than that of tap water (P < 0.001). Fluoride concentration in the VWS water ranged from <0.01 ppm to 0.04 ppm, with a mean concentration of 0.02 ppm (±0.02 ppm). Patients utilizing VWS as their primary source of drinking water may not be receiving optimal caries preventive benefits; thus dietary fluoride supplementation may be indicated. Conversely, to minimize the risk of fluorosis in infants consuming reconstituted infant formula, water from a VWS may be used. PMID:25184716

  3. Ion chromatography detection of fluoride in calcium carbonate.

    PubMed

    Lefler, Jamie E; Ivey, Michelle M

    2011-09-01

    Fluoride in aquatic systems is increasing due to anthropogenic pollution, but little is known about how this fluoride affects organisms that live in and around aquatic habitats. Fluoride can bioaccumulate in structures comprised of calcium carbonate, such as shells and skeletons of both freshwater and saltwater species as diverse as snails, corals, and coccolithophorid algae. In this article, ion chromatography (IC) techniques are developed to detect and quantify fluoride in a matrix of calcium carbonate. Solid samples are dissolved in hydrochloric acid, pretreated to remove the majority of the chloride ions, and then analyzed using IC. With these methods, the 3σ limit of detection is 0.2 mg of fluoride/kg of calcium carbonate. PMID:21859530

  4. Caries prevention through the fluoridation of milk. A review.

    PubMed

    Bánóczy, Jolán; Rugg-Gunn, Andrew J

    2007-10-01

    The aim of this review is to give an overview of 50 years experience of milk fluoridation and draw conclusions about the applicability of the method. Fluoridated milk was first investigated in the early 1950s, almost simultaneously in Switzerland, the USA and Japan. Stimulated by the favourable results obtained from these early studies, the establishment of The Borrow Dental Milk Foundation (subsequently The Borrow Foundation) in England gave an excellent opportunity for further research, both clinical and non-clinical, and a productive collaboration with the World Health Organization from the early 1980s onwards. Numerous peer-reviewed publications in international journals showed clearly the bioavailability of fluoride in milk, and increased concentrations of fluoride in saliva, dental plaque, dental enamel and dentine, and urine, after consumption of fluoridated milk. Clinical trials were initiated in the 1980s--some of these can be classed as randomised controlled trials, while most of the clinical studies were community preventive programs. These evaluations showed clearly that the optimal daily intake of fluoride in milk is effective in preventing dental caries. At present, milk fluoridation programs are running continuously in about ten countries of the world. Fluoridation of milk can be recommended as a caries preventive measure where the fluoride concentration in drinking water is suboptimal, caries experience in children is significant, and there is an existing school milk program. The program should aim to provide fluoridated milk for at least 200 days per year and should commence before the children are 4 years of age. PMID:18078140

  5. Fluoride caused thyroid endocrine disruption in male zebrafish (Danio rerio).

    PubMed

    Jianjie, Chen; Wenjuan, Xue; Jinling, Cao; Jie, Song; Ruhui, Jia; Meiyan, Li

    2016-02-01

    Excessive fluoride in natural water ecosystem has the potential to detrimentally affect thyroid endocrine system, but little is known of such effects or underlying mechanisms in fish. In the present study, we evaluated the effects of fluoride on growth performance, thyroid histopathology, thyroid hormone levels, and gene expressions in the HPT axis in male zebrafish (Danio rerio) exposed to different determined concentrations of 0.1, 0.9, 2.0 and 4.1 M of fluoride to investigate the effects of fluoride on thyroid endocrine system and the potential toxic mechanisms caused by fluoride. The results indicated that the growth of the male zebrafish used in the experiments was significantly inhibited, the thyroid microtrastructure was changed, and the levels of T3 and T4 were disturbed in fluoride-exposed male fish. In addition, the expressional profiles of genes in HPT axis displayed alteration. The expressions of all studied genes were significantly increased in all fluoride-exposed male fish after exposure for 45 days. The transcriptional levels of corticotrophin-releasing hormone (CRH), thyroid-stimulating hormone (TSH), thyroglobulin (TG), sodium iodide symporter (NIS), iodothyronine I (DIO1), and thyroid hormone receptor alpha (TRα) were also elevated in all fluoride-exposed male fish after 90 days of exposure, while the inconsistent expressions were found in the mRNA of iodothyronineⅡ (DIO2), UDP glucuronosyltransferase 1 family a, b (UGT1ab), transthyretin (TTR), and thyroid hormone receptor beta (TRβ). These results demonstrated that fluoride could notably inhibit the growth of zebrafish, and significantly affect thyroid endocrine system by changing the microtrastructure of thyroid, altering thyroid hormone levels and endocrine-related gene expressions in male zebrafish. All above indicated that fluoride could pose a great threat to thyroid endocrine system, thus detrimentally affected the normal function of thyroid of male zebrafish. PMID:26748264

  6. 76 FR 37129 - Determination That SODIUM FLUORIDE F 18 (Sodium Fluoride F-18) Injection, 10 to 200 Millicuries...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... Product List'' section of the Orange Book. In previous instances (see, e.g., 72 FR 9763, March 5, 2007; 61 FR 25497, May 21, 1996), the Agency has determined that, for purposes of Sec. Sec. 314.161 and 314... HUMAN SERVICES Food and Drug Administration Determination That SODIUM FLUORIDE F 18 (Sodium Fluoride...

  7. Industrial Applications of Graphite Fluoride Fibers

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheh; Kucera, Donald

    1991-01-01

    Based on fluorination technology developed during 1934 to 1959, and the fiber technology developed during the 1970s, a new process was developed to produce graphite fluoride fibers. In the process, pitch based graphitized carbon fibers are at first intercalated and deintercalated several times by bromine and iodine, followed by several cycles of nitrogen heating and fluorination at 350 to 370 C. Electrical, mechanical, and thermal properties of this fiber depend on the fluorination process and the fluorine content of the graphite fluoride product. However, these properties are between those of graphite and those of PTFE (Teflon). Therefore, it is considered to be a semiplastic. The physical properties suggest that this new material may have many new and unexplored applications. For example, it can be a thermally conductive electrical insulator. Its coefficient of thermal expansion (CTE) can be adjusted to match that of silicon, and therefore, it can be a heat sinking printed circuit board which is CTE compatible with silicon. Using these fibers in printed circuit boards may provide improved electrical performance and reliability of the electronics on the board over existing designs. Also, since it releases fluorine at 300 C or higher, it can be used as a material to store fluorine and to conduct fluorination. This application may simplify the fluorination process and reduce the risk of handling fluorine.

  8. Lanthanum fluoride nanoparticles for radiosensitization of tumors

    NASA Astrophysics Data System (ADS)

    Kudinov, Konstantin; Bekah, Devesh; Cooper, Daniel; Shastry, Sathvik; Hill, Colin; Bradforth, Stephen; Nadeau, Jay

    2016-03-01

    Dense inorganic nanoparticles have recently been identified as promising radiosensitizers. In addition to dose enhancement through increased attenuation of ionizing radiation relative to biological tissue, scintillating nanoparticles can transfer energy to coupled photosensitizers to amplify production of reactive oxygen species, as well as provide UVvisible emission for optical imaging. Lanthanum fluoride is a transparent material that is easily prepared as nanocrystals, and which can provide radioluminescence at a number of wavelengths through simple substitution of lanthanum ions with other luminescent lanthanides. We have prepared lanthanum fluoride nanoparticles doped with cerium, terbium, or both, that have good spectral overlap with chlorine6 or Rose Bengal photosensitizer molecules. We have also developed a strategy for stable conjugation of the photosensitizers to the nanoparticle surface, allowing for high energy transfer efficiencies on a per molecule basis. Additionally, we have succeeded in making our conjugates colloidally stable under physiological conditions. Here we present our latest results, using nanoparticles and nanoparticle-photosensitizer conjugates to demonstrate radiation dose enhancement in B16 melanoma cells. The effects of nanoparticle treatment prior to 250 kVp x-ray irradiation were investigated through clonogenic survival assays and cell cycle analysis. Using a custom apparatus, we have also observed scintillation of the nanoparticles and conjugates under the same conditions that the cell samples are irradiated.

  9. Hydrogen Fluoride in the Local Universe

    NASA Astrophysics Data System (ADS)

    Monje, Raquel R.; Lis, Dariusz C.; Phillips, Thomas G.

    2015-01-01

    The Herschel Space Observatory has provided a unique opportunity to study hydride molecules with large rotational constant in the interstellar medium (ISM) within the nearby universe. Some of the key results from hydride studies with Herschel, and in particular with the Heterodyne Instrument for the Far-Infrared (HIFI), are the first detection at high spectral resolution of the fundamental J = 1 - 0 rotational transition of hydrogen fluoride (HF) at 1.232 THz, and the discovery of its ubiquitous nature within the ISM of the Milky Way galaxy and nearby galaxies. The remarkable Herschel/ HIFI results suggest, that the HF J = 1 - 0 transition promises to yield an extremely sensitive probe of the diffuse molecular gas along the lines of sight toward background far-infrared continuum sources and, as predicted earlier by chemical models, a valuable surrogate for molecular hydrogen in the nearby and high redshift universe. These and other interesting results on hydrogen fluoride from Herschel observations will be presented, as well as the results from follow-up studies from ground-base facilities on hydride molecules towards luminous lensed high-redshifted galaxies with strong submillimeter continuum.

  10. Influence of Growth Mode and Sucrose on Susceptibility of Streptococcus sanguis to Amine Fluorides and Amine Fluoride-Inorganic Fluoride Combinations

    PubMed Central

    Embleton, J. V.; Newman, H. N.; Wilson, M.

    1998-01-01

    This study evaluated the susceptibility to amine fluorides (AmFs) of planktonic and biofilm cultures of Streptococcus sanguis grown with and without sucrose. Cultures were incubated with AmFs (250 mg of fluoride liter−1) for 1 min. The susceptibility of biofilms was less than that of the planktonic form and was further decreased by growth in the presence of sucrose. PMID:9726905

  11. Sources of dietary fluoride intake in 4-year-old children residing in low, medium and high fluoride areas in Iran.

    PubMed

    Zohouri, F V; Rugg-Gunn, A J

    2000-09-01

    Accurate estimation of fluoride dietary intake is desirable for optimising caries prevention. Little is known about the dietary fluoride intake of children aged 4 years, an age when many permanent teeth are forming. This study was undertaken in Fars Province, Iran, in 1995-1996, where there are big differences in temperature between winter and summer. The aims were to determine: (a) the relative contributions of different components of the diet to fluoride intake, (b) the effect of variation in fluoride concentration in drinking water, and (c) the effect of climate temperature. Temperature varied between +40 degrees C in summer to -5 degrees C in winter. The mean fluoride concentrations in drinking water in the three areas were 0.3, 0.6 and 4.0 mgF/L. Dietary information was obtained by two 3-day diet diaries with interview, validated with reference to international standards. The fluoride content of foods was measured using the silicon-facilitated diffusion method. One hundred and three 4-year-old children completed the study. The mean (and 95% confidence interval) dietary fluoride intakes in each of the three areas, respectively, were 413 (+/- 21), 698 (+/- 89) and 3472 (+/- 557) micrograms/day. Drinks provided 72 to 87% of dietary fluoride--this proportion increased with increasing water fluoride concentration and increasing climate temperature. Tea (infusion) was an important source of dietary fluoride, providing 31 to 38% of total dietary intake. Tap water was a more important source of fluoride than soft drinks. Cooked rice and bread were the most important food source of fluoride and the amount of fluoride they contributed increased as water fluoride concentration increased. The results of this first such survey in the Middle East showed (a) that water (as a drink) and tea were by far the most important contributors to dietary fluoride intake, (b) substantial increases in fluoride intake with increasing water fluoride concentrations, and (c) substantially

  12. Brick tea fluoride as a main source of adult fluorosis.

    PubMed

    Cao, Jin; Zhao, Yan; Liu, Jianwei; Xirao, Ruoden; Danzeng, Sangbu; Daji, Dawei; Yan, Yu

    2003-04-01

    An epidemiological survey was conducted in Naqu County, Tibet in September 2001 to investigate the manifestations of fluorosis in adults caused by the habitual consumption of brick tea. Profiles were obtained for the total daily fluoride intake, environmental fluoride levels and average urinary fluoride concentration, and a physical examination and a skeletal radiographic study were conducted. One hundred and eleven 30-78-year-old adults were enrolled. It was found that the fluoride level of water sources in Naqu County was 0.10+/-0.03 mg/l; no evidence of fluoride air pollution was found, but the brick tea water processed foods--zamba and buttered tea--had fluoride contents of 4.52+/-0.74 mg/kg and 3.21+/-0.65 mg/l, respectively. The adult daily fluoride intake reached 12 mg, of which 99% originated from the brick tea-containing foods. The positive rate of clinical symptoms by physical examination was 89%; furthermore, 42 of the 111 subjects were diagnosed by X-ray. The positive examination rate was 83%. Although the osteosclerosis-type skeletal fluorosis (overall increased bone matrix density) affected 74%, arthropathy and arthritis affected a significant number of the patients, resulting in functional disability. The results suggest that this brick tea-type fluorosis had even more severe adverse effects on human health compared with both the water-type and coal combustion-type fluorosis that occurred in other areas of China. PMID:12615125

  13. Topical fluoride for preventing dental caries in children and adolescents.

    PubMed

    Miller, Faith Y; Campus, Guglielmo; Giuliana, Giovanna; Piscopo, Maria R; Pizzo, Giuseppe

    2012-01-01

    The use of topically applied fluoride has been widely researched as a means to reduce the risk of dental caries in conjunction with other treatment modalities (mechanical oral hygiene, dietary control, antimicrobial intervention, pit and fissure sealants). There is overwhelming evidence that reports not only the significance and importance of the use of fluoride as a caries-preventive agent, but also how safe fluoride application is when used appropriately, particularly in higher risk individuals and populations. This paper reviews the caries-protective benefits of topical fluoride application in children and adolescents, with an emphasis on the clinical efficacy and safety of the vehicles by which fluoride is topically delivered. Fluoride toothpaste represents today the most cost-effective fluoride-delivery system in the oral cavity and its use should be the centerpiece in all caries-preventive strategies. On the other hand, mouthrinses, gels and varnishes currently represent adjuncts to toothpaste use and should be targeted towards individuals and groups at high risk of caries. PMID:22632397

  14. Short-term fluoride release from various aesthetic restorative materials.

    PubMed

    Yap, Adrian U J; Tham, S Y; Zhu, L Y; Lee, H K

    2002-01-01

    The short-term fluoride release of a giomer (Reactmer), a compomer (Dyract AP), a conventional glass ionomer cement (Fuji II Cap) and a resin-modified glass ionomer cement (Fuji II LC) was evaluated and compared. Specimen discs (6 +/-0.2 mm diameter and 1 +/- 0.2 mm thick) were prepared for each material using custom molds. Each disc was placed in 1 ml of deionized for 24 hours at 37 degrees C. After one day, the water was extracted and analyzed. The specimen discs were then re-immersed into another 1 ml of fresh deionized water. The procedure of removing and refilling the water was repeated for 28 days. Sample solutions taken during the first seven days and at days 14, 21 and 28 were introduced into a capillary electrophoresis system using field amplified sample injection (FASI) to determine fluoride release. Data was analyzed using factorial ANOVA/Scheffe's post-hoc test at significance level 0.05. An initial fluoride "burst" effect was observed with glass ionomers. Both compomer and giomer did not show an initial fluoride "burst" effect. With the exception of the compomer, fluoride release at day one was generally significantly greater than at the other time intervals. The glass ionomers released significantly more fluoride than the compomer and giomer at day one. Although fluoride release of the giomer was significantly greater than the other materials at day seven, it became significantly lower at day 28. PMID:12022457

  15. Fluoride occurrence in publicly supplied drinking water in Estonia

    NASA Astrophysics Data System (ADS)

    Karro, Enn; Indermitte, Ene; Saava, Astrid; Haamer, Kadri; Marandi, Andres

    2006-06-01

    A study was undertaken to examine the content and spatial distribution of fluoride in drinking water. Water samples (735) from public water systems covering all Estonian territory were analysed using SPADNS method. In order to specify the natural source of fluoride, the chemistry data from five aquifer systems utilised for water supply were included into the study. Fluoride concentrations in tap water, to a great extent, ranged from 0.01 to 6.95 mg/l. Drinking water in southern Estonia, where terrigenous Middle-Devonian aquifer system is exploited, has a fluoride concentration lower than recommended level (0.5 mg/l), thus promoting susceptibility to dental caries. The western part of the country is supplied by water with excess fluoride content (1.5-6.9 mg/l). Groundwater abstracted for drinking purposes originates from Ordovician and Silurian carbonate rocks. The content of fluoride in Silurian-Ordovician aquifer system is associated with the groundwater abstraction depth and the main controlling factors of dissolved fluoride are the pH value and the chemical type of water.

  16. [Dietary and hygienic aspects of fluoride exposure in pregnant women].

    PubMed

    Chłapowska, Joanna; Opydo-Szymaczek, Justyna

    2004-01-01

    The study was undertaken to assess the exposure of pregnant women to fluoride on the basis of diet preferences and hygienic habits revealed with a questionnaire. The group included 59 women aged 22-39, living in a large urban agglomeration. Questions concerned sources of fluoride such as diet (tap water, tea, fish, poultry), use of fluoride-containing preparations for oral hygiene and substances containing fluoride for additional prophylaxis. The oral health status was clinically examined and caries intensity was assessed with the mean DMF-t index. According to the clinical examination, the mean DMF-t index was 13.64 and ranged from 1 to 23. Consumption of tap water averaged 0.73 L (max. 2.5 L), including 0.55 L (max. 2.5 L) of tea. Poultry was a regular part of the diet in only 14 of the respondents (24%) and only 3 (5%) sporadically (once a week) ate ocean fish. All the respondents used toothpaste containing fluoride, but only 15.3% applied professional prophylaxis with fluoride preparations. As far as the diet is concerned, individual differences in the intake of fluorides were significant. Interestingly, despite the declared everyday use of fluorine-containing toothpaste, the caries intensity index was rather high, suggesting the need for special dental care in this group of patients. PMID:16892578

  17. Serum fluoride and sialic acid levels in osteosarcoma.

    PubMed

    Sandhu, R; Lal, H; Kundu, Z S; Kharb, S

    2011-12-01

    Osteosarcoma is a rare malignant bone tumor most commonly occurring in children and young adults presenting with painful swelling. Various etiological factors for osteosarcoma are ionizing radiation, family history of bone disorders and cancer, chemicals (fluoride, beryllium, and vinyl chloride), and viruses. Status of fluoride levels in serum of osteosarcoma is still not clear. Recent reports have indicated that there is a link between fluoride exposure and osteosarcoma. Glycoproteins and glycosaminoglycans are an integral part of bone and prolonged exposure to fluoride for long duration has been shown to cause degradation of collagen and ground substance in bones. The present study was planned to analyze serum fluoride, sialic acid, calcium, phosphorus, and alkaline phosphatase levels in 25 patients of osteosarcoma and age- and sex-matched subjects with bone-forming tumours other than osteosarcoma and musculo-skeletal pain (controls, 25 each). Fluoride levels were analyzed by ISE and sialic acid was analyzed by Warren's method. Mean serum fluoride concentration was found to be significantly higher in patients with osteosarcoma as compared to the other two groups. The mean value of flouride in patients with other bone-forming tumors was approximately 50% of the group of osteosarcoma; however, it was significantly higher when compared with patients of group I. Serum sialic acid concentration was found to be significantly raised in patients with osteosarcoma as well as in the group with other bone-forming tumors as compared to the group of controls. There was, however, no significant difference in the group of patients of osteosarcoma when compared with group of patients with other bone-forming tumors. These results showing higher level of fluoride with osteosarcoma compared to others suggesting a role of fluoride in the disease. PMID:19390788

  18. Fluoride varnishes with calcium glycerophosphate: fluoride release and effect on in vitro enamel demineralization.

    PubMed

    Carvalho, Thiago Saads; Peters, Bianca Glerean; Rios, Daniela; Magalhães, Ana Carolina; Sampaio, Fabio Correia; Buzalaf, Marília Afonso Rabelo; Bönecker, Marcelo José Strazzeri

    2015-01-01

    The aims of this study were (1) to assess the amount of fluoride (F) released from varnishes containing calcium glycerophosphate (CaGP) and (2) to assess the effect of the experimental varnishes on in vitro demineralization. Six test groups using 5 varnishes: base varnish (no active ingredients); Duraphat® (2.26% NaF); Duofluorid® (5.63% NaF/CaF2); experimental varnish 1 (1% CaGP/5.63% NaF/CaF2); experimental varnish 2 (5% CaGP/5.63% NaF/CaF2); and no varnish were set up. In stage 1, 60 acrylic blocks were randomly distributed into 6 groups (n = 10). Then 300 µg of each varnish was applied to each block. The blocks were immersed in deionized water, which was changed after 1, 8, 12, 24, 48 and 72 hours. Fluoride concentration in the water was analyzed using a fluoride electrode. In stage 2, 60 bovine enamel samples were distributed into 6 groups (n = 10), and treated with 300 µg of the respective varnish. After 6 h the varnish was removed and the samples were subjected to a 7-day in vitro pH cycle (6 h demineralization/18 h remineralization per day). The demineralization was measured using surface hardness. The results showed that both experimental varnishes released more fluoride than Duofluorid® and Duraphat® (p < 0.05), but Duraphat® showed the best preventive effect by decreasing enamel hardness loss (p < 0.05). Therefore, we conclude that even though (1) the experimental varnishes containing CaGP released greater amounts of F, (2) they did not increase in the preventive effect against enamel demineralization. PMID:26176358

  19. Atomic layer deposition of magnesium fluoride via bis(ethylcyclopentadienyl)magnesium and anhydrous hydrogen fluoride

    SciTech Connect

    Hennessy, John Jewell, April D.; Greer, Frank; Lee, Michael C.; Nikzad, Shouleh

    2015-01-15

    A new process has been developed to deposit magnesium fluoride (MgF{sub 2}) thin films via atomic layer deposition (ALD) for use as optical coatings in the ultraviolet. MgF{sub 2} was deposited in a showerhead style ALD reactor using bis(ethylcyclopentadienyl)magnesium and anhydrous hydrogen fluoride (HF) as precursors at substrate temperatures from 100 to 250 °C. The use of HF was observed to result in improved morphology and reduced impurity content compared to other reported MgF{sub 2} ALD approaches that use metal fluoride precursors as the fluorine-containing chemistry. Characterization of these films has been performed using spectroscopic ellipsometry, atomic force microscopy, and x-ray photoelectron spectroscopy for material deposited on silicon substrates. Films at all substrate temperatures were transparent at wavelengths down to 190 nm and the low deposition temperature combined with low surface roughness makes these coatings good candidates for a variety of optical applications in the far ultraviolet.

  20. Public Health Service report on fluoride benefits and risks

    SciTech Connect

    Not Available

    1991-06-14

    This report, Public Health Service Report on Fluoride Benefits and Risks is a summary of the findings, conclusions, and recommendations of Review of Fluoride Benefits and Risks: Report of the Ad Hoc Subcommittee on Fluoride of the Committee to Coordinate Environmental Health and Related Programs, published in February 1991. The full report was prepared by an ad hoc subcommittee of the United States Public Health Service's Committee to Coordinate Environmental Health and Related Programs (CCEHRP) at the request of the Assistant Secretary for Health. The full report can be obtained from the Public Health Service, Department of Health and Human Services.

  1. Progress in heavy metal fluoride glasses for infrared fibers

    NASA Astrophysics Data System (ADS)

    Drexhage, M. G.; El-Bayoumi, O. H.; Moynihan, C. T.

    1982-12-01

    The optical and physical characteristics of heavy metal fluoride glasses are reviewed with reference to recent laboratory experiments. In particular, attention is given to comparative optical studies of fluorozirconate and fluorohafnate glasses, refractive index and material dispersion of fluoride glasses, and preliminary results of optical studies of heavy metal fluoride glasses not containing ZrF4 or HfF4. The latter sometimes exhibit extended transparency in the mid-IR relative to that observed in fluorozirconate and fluorohafnate glasses. The effect of the AlF4 content on the optical properties of BaF2/ThF4 glasses is discussed.

  2. Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

    SciTech Connect

    McNamara, Bruce K.; Scheele, Randall D.; Casella, Andrew M.; Kozelisky, Anne E.

    2011-09-28

    This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

  3. Effects of fluoride emissions on enzyme activity in metabolism of agricultural plants

    SciTech Connect

    Moeri, P.B.

    1980-01-01

    The effects of fluoride on the activity of malatedehydrogenase (MDH) in rape seed and rye grass have been investigated. Fluoride, which has been absorbed from the air, seems to act differently from fluoride added to the soil. The action of airborne fluoride compounds resorbed by the plant on the activity of MDH significantly correlated with the distance from an aluminum plant, crop yield, and fluoride content. 5 references, 5 figures, 2 tables.

  4. Crystallization of heavy metal fluoride glasses

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.; Bruce, Allan J.; Doremus, R. H.; Moynihan, C. T.

    1984-01-01

    The kinetics of crystallization of a number of fluorozirconate glasses were studied using isothermal and dynamic differential scanning calorimetry and X-ray diffraction. The addition of the fluorides LiF, NaF, AlF3, LaF3 to a base glass composition of ZrF4-BaF2 reduced the tendency to crystallize, probably by modifying the viscosity-temperature relation. ZrF4-BaF2-LaF3-AlF3-NaF glass was the most stable against devitrification and perhaps is the best composition for optical fibers with low scattering loss. Some glasses first crystallize out into metastable beta-BaZr2F10 and beta-BaZrF6 phases, which transform into the most stable alpha-phases when heated to higher temperatures. The size of the crystallites was estimated to be about 600 A from X-ray diffraction.

  5. Detection of carbonyl fluoride in the stratosphere

    NASA Technical Reports Server (NTRS)

    Rinsland, C. P.; Park, J. H.; Russell, J. M., III; Zander, R.; Brown, L. R.; Farmer, C. B.; Norton, R. H.; Raper, O. F.

    1986-01-01

    Infrared solar absorption spectra of the stratosphere recorded at a resolution of 0.01/cm by the ATMOS (Atmospheric Trace Molecule Spectroscopy) instrument from onboard Spacelab 3 (04/30 to 05/6/85) have revealed the existence of many previously unobserved absorption features in the 1925 to 1960/cm and 1249 to 1255/cm regions and one at 774/cm. On the basis of comparisons with laboratory spectra, these features have been identified as belonging to the nu1, nu4, and nu6 bands of carbonyl fluoride, respectively. Volume mixing ratios of COF2 between 17 and 40 km have been deduced from analysis of the nu1 and nu6 bands.

  6. High-pressure stabilization of argon fluorides.

    PubMed

    Kurzydłowski, Dominik; Zaleski-Ejgierd, Patryk

    2016-01-28

    On account of the rapid development of noble gas chemistry in the past half-century both xenon and krypton compounds can now be isolated in macroscopic quantities. The same does not hold true for the next lighter group 18 element, argon, which forms only isolated molecules stable solely in low temperature matrices or supersonic jet streams. Here we present theoretical investigations into a new high-pressure reaction pathway, which enables synthesis of argon fluorides in bulk and at room temperature. Our hybrid DFT calculations (employing the HSE06 functional) indicate that above 60 GPa ArF2-containing molecular crystals can be obtained by a reaction between argon and molecular fluorine. PMID:26742478

  7. Fabrication and Testing of Polyvinylidene Fluoride Capacitors

    NASA Technical Reports Server (NTRS)

    Buritz, R. S.

    1980-01-01

    High energy density capacitors made from metallized polyvinylidene fluoride film were built and tested. Terminations of aluminum-babbitt, tin-babbitt, and all-babbitt were evaluated. All-babbit terminations appeared to be better. The 0.1 microfarad and 2 microfarad capacitors were made of 6 micrometer material. Capacitance, dissipation factor, and insulation resistance measurements were made over the ranges -55 C to 125 C and 10 Hz to 100 kHz. Twelve of forty-one 0.1 microfarad capacitors survived a 5000 hour dc plus ac life test. Under the same conditions, the 2 microfarad capacitors exhibited overheating because of excessive power loss. Some failures occurred after low temperature exposures for 48 hours. No failures were caused by vibration or temperature cycling.

  8. Intrinsic Instabilities Of Heavy Metal Fluoride Glasses

    NASA Astrophysics Data System (ADS)

    Bruce, A. J.; Moynihan, C. T.; Loehr, S. R.; Opalka, S. M.; Mossadegh, R.; Perazzo, N. L.; Bansal, N. P.; Doremus, R. H.; Doremus; Drexhage, M. G.

    1985-06-01

    Heavy metal fluoride glasses (HMFG) are potentially useful as optical components in a wide range of devices. Their utilization has so far been delayed mainly because of insufficient material purity and inadequate processing conditions. However, as the result of numerous research efforts, these problems are gradually diminishing, and it now seems likely that the ultimate limitations for use of HMFG components, at least in those applications in which high optical transparency is not a prerequisite, will be imposed by more intrinsic instabilities of the glasses themselves. These include their strong tendency to crystallize on quenching and subsequent reheating, low mechanical and chemical durability, and the possibility that they will undergo significant physical aging in situ. Experimental data relating to these problems have now been obtained, and their relative importance is assessed in this paper.

  9. Intercomparison of measurements of stratospheric hydrogen fluoride

    NASA Technical Reports Server (NTRS)

    Mankin, William G.; Coffey, M. T.; Chance, K. V.; Traub, W. A.; Carli, B.; Mencaraglia, F.; Piccioli, S.; Farmer, C. B.; Seals, R. K.

    1990-01-01

    Observations of the vertical profile of hydrogen fluoride (HF) vapor in the stratosphere and of the vertical column amounts of HF above certain altitudes were made using a variety of spectroscopic instruments in the 1982 and 1983 Balloon Intercomparison Campaigns. Both emission instruments working in the far-infrared spectral region and absorption instruments using solar occultation in the 2.5-micron region were employed. No systematic differences were seen in results from the two spectral regions. A mean profile from 20 - 45 km is presented, with uncertainties ranging from 20 to 50 percent. Total columns measured from ground and from 12 km are consistent with the profile if the mixing ratio for HF is small in the troposphere and low stratosphere.

  10. High-Density, Scintillating, Fluoride Glass Calorimeters

    NASA Astrophysics Data System (ADS)

    Akgun, Ugur; Xie, Qiuchen

    2014-03-01

    The unprecedented radiation levels in current Large Hadron Collider runs, and plans to even increase the luminosity creates a need for new detector technologies to be investigated. Here, we propose to use high density, scintillating, fluoride glasses as active media in calorimeters. CHG3 is a special example of this glass family, which has been developed specifically for hadron collider experiments, and is known for fast response time, in addition to high light yield. In this presentation, the results from a computational study on the performances of the two different designs of CHG3 glass calorimeters are reported. First design reads the signal directly from the edge of the glass plate; the second design utilizes wavelength-shifting fibers to carry the signal out of the glass plate. Each simulation model is a sampling calorimeter with 20 alternating layers of glass and iron absorber. By changing the absorber thickness we tested hadronic as well as electromagnetic capabilities of the calorimeter models.

  11. Using High Fluoride Concentration Products in Public Policy: A Rapid Review of Current Guidelines for High Fluoride Concentration Products.

    PubMed

    Douglas, Gail V A; Ramsdale, Martin P; Vinall-Collier, Karen; Csikar, Julia I

    2016-01-01

    Despite improvements in dental caries levels since the widespread introduction of fluoride toothpastes, it is still a disease which is considered to be a priority in many countries around the world. Individuals at higher risk of caries can be targeted with products with a high fluoride concentration to help reduce the amount and severity of the disease. This paper compares guidance from around the world on the use of products with a high fluoride concentration and gives examples of how guidance has been translated into activity in primary care dental practice. A rapid review of electronic databases was conducted to identify the volume and variation of guidance from national or professional bodies on the use of products with a high fluoride concentration. Fifteen guidelines published within the past 10 years and in English were identified and compared. The majority of these guidelines included recommendations for fluoride varnish use as well as for fluoride gels, while a smaller number offered guidance on high fluoride strength toothpaste and other vehicles. Whilst there was good consistency in recommendations for fluoride varnish in particular, there was sometimes a lack of detail in other areas of recommendation for other vehicles with a high fluoride concentration. There are good examples within the UK, such as the Childsmile project and Delivering Better Oral Health, which highlight that the provision of evidence-based guidance can be influential in directing scarce resources towards oral health improvements. Policy can be influenced by evidence-based national recommendations and used to help encourage dental professionals and commissioners and third-party payers to adopt higher levels of practices aimed at oral health improvement. PMID:27100106

  12. Fluoridated toothpaste: usage and ingestion of fluoride by 4- to 6-yr-old children in England.

    PubMed

    Zohoori, Fatemeh V; Duckworth, Ralph M; Omid, Narges; O'Hare, William T; Maguire, Anne

    2012-10-01

    Fluoridated toothpaste is effective for dental caries control, yet may be a risk factor for dental fluorosis. This study aimed to quantify fluoride ingestion from toothpaste by children and to investigate the effects of age, gender, and social class on the amount of fluoride ingested per toothbrushing session. Sixty-one children, 4-6 yr of age, were recruited: 38 were from low socio-economic (LSE) areas of Newcastle, UK, and 23 were from high socio-economic (HSE) areas of Newcastle, UK. All expectorated saliva, rinse water (if used), and residual toothpaste were collected after brushing at home and were analysed for fluoride. Of the children, 74% and 69% from HSE and LSE areas, respectively, claimed that they brushed twice per day. The mean (SD) weight of toothpaste dispensed was 0.67 (0.36) g. The mean (SD) amount of fluoride ingested per toothbrushing session and per day was 17.0 (14.7) and 29.3 (32.8) μg kg(-1) of body weight, respectively. Daily fluoride intake per kilogram of body weight did not differ significantly between children from LSE and HSE areas. Fluoride intake per toothbrushing session was significantly influenced by weight of toothpaste, its fluoride concentration, and the child's age. Whilst the average amount of toothpaste used per toothbrushing session was more than twice the recommended amount (of 0.25 g), only one child had a daily fluoride intake that exceeded the tolerable upper intake level of 0.1 mg kg(-1) of body weight for this age group. PMID:22984999

  13. Fluoride removal performance of glass derived hydroxyapatite

    SciTech Connect

    Liang, Wen; Zhan, Lei; Piao, Longhua; Russel, Christian

    2011-02-15

    Research highlights: {yields} Novel sodium calcium borate glass derived hydroxyapatite (G-HAP) is prepared. {yields} Micro-G-HAP adsorbs F{sup -} ions in solutions more effectively than commercial nano-HAP. {yields} The adsorption kinetics and isotherms are well fitted by a second order kinetic model and Freundlich isotherm model. -- Abstract: A novel sodium calcium borate glass derived hydroxyapatite (G-HAP) with different ranges of particle size was prepared by immersion sodium calcium borate glass in 0.1 M K{sub 2}HPO{sub 4} solution by the ratio of 50 g L{sup -1} for 7 days. The unique advantage of G-HAP for the adsorption of fluoride ions in solutions was studied. The effects of size and quantity of particles, pH value and adsorption time on adsorption performance were investigated. The maximum adsorption capacity was 17.34 mg g{sup -1} if 5 g L{sup -1}, <100 {mu}m G-HAP was added to a solution with an initial pH value of 6.72 and the adsorption time was 12 h. The results showed that the micro-G-HAP could immobilize F{sup -} in solution more effectively than commercial nano-HAP, which makes potential application of the G-HAP in removing the fluoride ions from wastewater. The adsorption kinetics and isotherms for F{sup -} could be well fitted by a second order kinetic model and Freundlich isotherm model respectively, which could be used to describe the adsorption behavior. The mechanism of G-HAP in immobilizing F{sup -} from aqueous solutions was investigated by the X-ray diffraction (XRD), infrared spectra (IR) and scanning electron microscopy (SEM).

  14. Formation of lithium fluoride/metal nanocomposites for energy storage through solid state reduction of metal fluorides

    SciTech Connect

    Amatucci, GG; Pereira, N; Badway, F; Sina, M; Cosandey, F; Ruotolo, M; Cao, C

    2011-12-01

    In order to utilize high energy metal fluoride electrode materials as direct replacement electrode materials for lithium ion batteries in the future, a methodology to prelithiate the cathode or anode must be developed. Herein, we introduce the use of a solid state Li(3)N route to achieve the lithiation and mechanoreduction of metal fluoride based nanocomposites. The resulting prelithiation was found to be effective with the formation of xLiF:Me structures of very fine nanodimensions analogous to what is found by electrochemical lithiation. Physical and electrochemical properties of these nanocomposites for the bismuth and iron lithium fluoride systems are reported. (C) 2011 Elsevier B.V. All rights reserved.

  15. Thermodynamics of neptunium(V) fluoride and sulfate at elevatedtemperatures

    SciTech Connect

    Rao, Linfeng; Tian, Guoxin; Xia, Yuanxian; Friese, Judah I.

    2006-10-31

    Complexation of neptunium(V) with fluoride and sulfate at elevated temperatures was studied by microcalorimetry. Thermodynamic parameters, including the equilibrium constants and enthalpy of protonation of fluoride and sulfate, and the enthalpy of complexation between Np(V) and fluoride and sulfate at 25 - 70 C were determined. Results show that the complexation of Np(V) with fluoride and sulfate is endothermic and that the complexation is enhanced by the increase in temperature - a three-fold increase in the stability constants of NpO{sub 2}F(aq) and NpO{sub 2}SO{sub 4}{sup -} as the temperature is increased from 25 to 70 C.

  16. Pharmacokinetics in the oral cavity: fluoride and other active ingredients.

    PubMed

    Duckworth, Ralph M

    2013-01-01

    Modern commercial toothpastes contain therapeutic ingredients to combat various oral conditions, for example, caries, gingivitis, calculus and tooth stain. The efficient delivery and retention of such ingredients in the mouth is essential for good performance. The aim of this chapter is to review the literature on the oral pharmacokinetics of, primarily, fluoride but also other active ingredients, mainly anti-plaque agents. Elevated levels of fluoride have been found in saliva, plaque and the oral soft tissues after use of fluoridated toothpaste, which persist at potentially active concentrations for hours. Both experiment and mathematical modelling suggest that the soft tissues are the main oral reservoir for fluoride. Qualitatively similar observations have been made for anti-plaque agents such as triclosan and metal cations, though their oral substantivity is generally greater. Scope for improved retention and subsequent efficacy exists. PMID:23817065

  17. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate Plants § 60.222 Standard for fluorides. (a) On and after the date on...

  18. Complexation of Plutonium (IV) with Fluoride at Variable Temperatures

    SciTech Connect

    Xia, Yuanxian; Rao, Linfeng; Friese, Judah I.; Moore, Dean A.; Bachelor, Paula P.

    2010-02-02

    The complexation of Pu(IV) with fluoride at elevated temperatures was studied by solvent extraction technique. A solution of NaBrO3 was used as holding oxidant to maintain the oxidation state of plutonium throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of fluoride were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-F- complexes, dominant in the aqueous phase under the experimental conditions, were calculated from the effect of fluoride ions on the distribution ratio. The thermodynamic parameters, including enthalpy and entropy of complexation between Pu(IV) and fluoride at 25 degrees C - 55 degrees C were calculated from the stability constants at different temperatures by using the Van’t Hoff equation.

  19. Fluorination of amorphous thin-film materials with xenon fluoride

    DOEpatents

    Weil, R.B.

    1987-05-01

    A method is disclosed for producing fluorine-containing amorphous semiconductor material, preferably comprising amorphous silicon. The method includes depositing amorphous thin-film material onto a substrate while introducing xenon fluoride during the film deposition process.

  20. Fluorination of amorphous thin-film materials with xenon fluoride

    DOEpatents

    Weil, Raoul B.

    1988-01-01

    A method is disclosed for producing fluorine-containing amorphous semiconductor material, preferably comprising amorphous silicon. The method includes depositing amorphous thin-film material onto a substrate while introducing xenon fluoride during the film deposition process.

  1. Graphite fluoride as a solid lubricant in a polyimide binder

    NASA Technical Reports Server (NTRS)

    Fusaro, R. L.; Sliney, H. E.

    1972-01-01

    Polyimide resin (PI) was shown to be a suitable binder material for the solid lubricant graphite fluoride, (CF(1.1))n. Comparisons were made to similar tests using PI-bonded MOS2 films, graphite fluoride rubbed films, and MOS2 rubbed films. The results showed that, at any one specific temperature between 25 and 400 C, the wear life of PI-bonded graphite fluoride films exceeded those of the other three films by at least a factor of 2 and by as much as a factor of 60. Minimum friction coefficients for the PI-bonded films were 0.08 for graphite fluoride and 0.04 for MOS2. The rider wear rates for the two PI-bonded films at 25 C were nearly equal.

  2. Phase A design study of microgravity fluoride fiber puller

    NASA Technical Reports Server (NTRS)

    Workman, Gary L.; Smith, Guy A.; Kosten, Susan

    1994-01-01

    Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

  3. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following special... alloy containing any of these metals may not be used in the tank construction, or in fittings in...

  4. Fluoride ion recognition by chelating and cationic boranes.

    PubMed

    Hudnall, Todd W; Chiu, Ching-Wen; Gabbaï, François P

    2009-02-17

    Because of the ubiquity of fluoride ions and their potential toxicity at high doses, researchers would like to design receptors that selectively detect this anion. Fluoride is found in drinking water, toothpaste, and osteoporosis drugs. In addition, fluoride ions also can be detected as an indicator of uranium enrichment (via hydrolysis of UF(6)) or of the chemical warfare agent sarin, which releases the ion upon hydrolysis. However, because of its high hydration enthalpy, the fluoride anion is one of the most challenging targets for anion recognition. Among the various recognition strategies that are available, researchers have focused a great deal of attention on Lewis acidic boron compounds. These molecules typically interact with fluoride anions to form the corresponding fluoroborate species. In the case of simple triarylboranes, the fluoroborates are formed in organic solvents but not in water. To overcome this limitation, this Account examines various methods we have pursued to increase the fluoride-binding properties of boron-based receptors. We first considered the use of bifunctional boranes, which chelate the fluoride anion, such as 1,8-diborylnaphthalenes or heteronuclear 1-boryl-8-mercurio-naphthalenes. In these molecules, the neighboring Lewis acidic atoms can cooperatively interact with the anionic guest. Although the fluoride binding constants of the bifunctional compounds exceed those of neutral monofunctional boranes by several orders of magnitude, the incompatibility of these systems with aqueous media limits their utility. More recently, we have examined simple triarylboranes whose ligands are decorated by cationic ammonium or phosphonium groups. These cationic groups increase the electrophilic character of these boranes, and unlike their neutral analogs, they are able to complex fluoride in aqueous media. We have also considered cationic boranes, which form chelate complexes with fluoride anions. Our work demonstrates that Coulombic and chelate

  5. Crystallization, Optical and Chemical Properties of Fluoride Glasses

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.

    1985-01-01

    Fluoride glasses have great promise as infrared optical components, especially fibers, because they are transparent to 8 micrometers and higher. In order to optimize properties, different glass compositions are needed. Some are hard to form in a container, and may possibly be formable in a containerless furnace. Understanding of crystallization with and without a container could lead to glasses with optimum properties. Chemical durability (attack by water) can limit or extend the applicability of fluoride glasses. Progress to date is given.

  6. Occurrence of fluoride in ground waters of Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Alabdulaaly, Abdulrahman I.; Al-Zarah, Abdullah I.; Khan, Mujahid A.

    2013-09-01

    The presence of elevated levels of fluoride in groundwater is considered a global problem. Fluoride in water derives mainly from dissolution of natural minerals in the rocks and soils with which water interacts. The most common fluorine-bearing minerals are fluorite, apatite and micas. Anthropogenic sources of fluoride include agricultural fertilizers and combustion of coal. In the present research, a survey of wells ( n = 1,060) was undertaken in all the 13 regions of the Kingdom of Saudi Arabia to assess the contained fluoride (F) levels. The results indicated variation in fluoride levels from 0.10 to 5.4 mg/L as F throughout the kingdom. The average fluoride levels in milligrams per liter as F were as follows in descending order: 1.80 (Hadwood Shamalyah), 1.37 (Hail), 1.33 (Eastern Province), 1.16 (Al Jouf), 1.11 (Qassim), 1.01 (Riyadh), 0.90 (Madina Al Munnawara), 0.81 (Tabouk), 0.74 (Makkah Al- Mukaramma), 0.73 (Jizan), 0.66 (Asir), 0.64 (Najran), and 0.60 (Al Baha). The results indicated that fluoride levels exceeded the USEPA maximum contaminant limits for drinking water (4 mg/L) in several wells ( n = 7) in different regions of the kingdom and that 13.96 % of the wells exceeded the World Health Organization recommended levels (1.5 mg/L). The results were also compared with the secondary USEPA contaminant standards of 2.0 mg/L for fluorides.

  7. Quality of our groundwater resources: arsenic and fluoride

    USGS Publications Warehouse

    Nordstrom, D. Kirk

    2011-01-01

    Groundwater often contains arsenic or fluoride concentrations too high for drinking or cooking. These constituents, often naturally occurring, are not easy to remove. The right combination of natural or manmade conditions can lead to elevated arsenic or fluoride which includes continental source rocks, high alkalinity and pH, reducing conditions for arsenic, high phosphate, high temperature and high silica. Agencies responsible for safe drinking water should be aware of these conditions, be prepared to monitor, and treat if necessary.

  8. Volatile fluoride process for separating plutonium from other materials

    DOEpatents

    Spedding, F. H.; Newton, A. S.

    1959-04-14

    The separation of plutonium from uranium and/or fission products by formation of the higher fluorides off uranium and/or plutonium is described. Neutronirradiated uranium metal is first converted to the hydride. This hydrided product is then treated with fluorine at about 315 deg C to form and volatilize UF/sub 6/ leaving plutonium behind. Thc plutonium may then be separated by reacting the residue with fluorine at about 5004DEC and collecting the volatile plutonium fluoride thus formed.

  9. VOLATILE FLUORIDE PROCESS FOR SEPARATING PLUTONIUM FROM OTHER MATERIALS

    DOEpatents

    Spedding, F.H.; Newton, A.S.

    1959-04-14

    The separation of plutonium from uranium and/or tission products by formation of the higher fluorides of uranium and/or plutonium is discussed. Neutronirradiated uranium metal is first convcrted to the hydride. This hydrided product is then treatced with fluorine at about 315 deg C to form and volatilize UF/sup 6/ leaving plutonium behind. The plutonium may then be separated by reacting the residue with fluorine at about 500 deg C and collecting the volatile plutonium fluoride thus formed.

  10. Observation of color center peaks in calcium fluoride.

    PubMed

    Aoki, T; Garvie, L A J; Rez, P

    2015-06-01

    Alkali halides such as calcium fluoride all have color center defects that absorb light in the visible region. Using a moncochromator equipped, aberration corrected, scanning transmission electron microscope (STEM) we recorded spectra showing the time evolution of the generation of F and H centers in calcium fluoride. The final stage of electron beam irradiation is the formation of metallic calcium nanoparticles. High resolution low loss spectra for the Vacuum Ultraviolet region were also recorded. PMID:25725200

  11. Fluoride concentrations in a crystalline bedrock aquifer Marathon County, Wisconsin

    NASA Astrophysics Data System (ADS)

    Ozsvath, David L.

    2006-05-01

    Water samples from 2,789 private water-supply wells in Marathon County, Wisconsin reveal that fluoride concentrations in the crystalline bedrock range from <0.01 to 7.60 mg/L, with 0.6% of the values exceeding the Environmental Protection Agency’s (EPA’s) maximum contaminant level of 4 mg/L, and 8.6% exceeding the EPA’s secondary maximum contaminant level of 2.0 mg/L. Roughly a quarter of the wells contain dissolve fluoride within the range considered optimal for human health (between 0.5 and 1.5 mg/L), whereas 63.3% fall below 0.5 mg/L. Consistent with studies conducted in other regions, felsic rocks have significantly higher fluoride concentrations than mafic and metasedimentary rocks. Syenites yield the most fluoriferous groundwaters, but the highest median concentration occurs in a sodium-plagioclase granite. A relationship between plagioclase composition and fluoride concentrations suggests that dissolved fluoride levels are controlled by fluorite solubility and that higher fluoride concentrations are found in soft, sodium-rich groundwater.

  12. Monitoring of fluoride in water samples using a smartphone.

    PubMed

    Levin, Saurabh; Krishnan, Sunderrajan; Rajkumar, Samuel; Halery, Nischal; Balkunde, Pradeep

    2016-05-01

    In several parts of India, groundwater is the only reliable, year round source for drinking water. Prevention of fluorosis, a chronic disease resulting from excess intake of fluoride, requires the screening of all groundwater sources for fluoride in endemic areas. In this paper, the authors present a field deployable colorimetric analyzer based on an inexpensive smartphone embedded with digital camera for taking photograph of the colored solution as well as an easy-fit, and compact sample chamber (Akvo Caddisfly). Phones marketed by different smartphone makers were used. Commercially available zirconium xylenol orange reagent was used for determining fluoride concentration. A software program was developed to use with the phone for recording and analyzing the RGB color of the picture. Linear range for fluoride estimation was 0-2mgl(-1). Around 200 samples, which consisted of laboratory prepared as well as field samples collected from different locations in Karnataka, India, were tested with Akvo Caddisfly. The results showed a significant positive correlation between Ion Selective Electrode (ISE) method and Akvo Caddisfly (Phones A, B and C), with correlation coefficient ranging between 0.9952 and 1.000. In addition, there was no significant difference in the mean fluoride content values between ISE and Phone B and C except for Phone A. Thus the smartphone method is economical and suited for groundwater fluoride analysis in the field. PMID:26874766

  13. Response of grapevines to fluoride under field conditions

    SciTech Connect

    Murray, F.

    1983-07-01

    Grapevines (Vitis vinifera L. cv. Shiraz) were fumigated in open-top chambers with hydrogen fluoride for 64 days at mean atmospheric fluoride concentrations of 0.17 or 0.28 ..mu..gHFm/sup -3/. Other grapevines grown under ambient conditions in the vineyard or maintained in control chambers were exposed to 0.13 or 0.05 ..mu..gHFm/sup -3/, respectively. Leaves of grapevines exposed to 0.28, 0.17, 0.13, or 0.05 ..mu..gHFm/sup -3/ accumulated up to 85, 55, 20, or 11 ..mu..gFg/sup -1/, respectively. Foliar necrosis was observed on plants exposed to 0.28 ..mu..gHFm/sup -3/, but no injury symptoms were observed at 0.17 ..mu..gHFm/sup -3/ or in control plants. Grapevines growing under ambient conditions had significantly greater mean bunch weight, peduncle weight, number of grapes per bunch, and leaf protein levels than the fumigated treatments. However, these differences may be associated with a chamber effect rather than with an effect of fluoride on grapevines. No significant differences were found between treatments for grape potential alcohol content, fruit acids, number of bunches or grapes per vine, fresh weight of grapes, or leaf chlorophyll content, despite foliar fluoride concentrations in the highest fluoride fumigation level reaching 85 ..mu..gFg/sup -1/. No evidence was found of significant fluoride accumulation in berries or canes. 26 references, 4 tables.

  14. An Overview of Liquid Fluoride Salt Heat Transport Technology

    SciTech Connect

    Cetiner, Mustafa Sacit; Holcomb, David Eugene

    2010-01-01

    Liquid fluoride salts are a leading candidate heat transport medium for high-temperature applications. This report provides an overview of the current status of liquid salt heat transport technology. The report includes a high-level, parametric evaluation of liquid fluoride salt heat transport loop performance to allow intercomparisons between heat-transport fluid options as well as providing an overview of the properties and requirements for a representative loop. Much of the information presented here derives from the earlier molten salt reactor program and a significant advantage of fluoride salts, as high temperature heat transport media is their consequent relative technological maturity. The report also includes a compilation of relevant thermophysical properties of useful heat transport fluoride salts. Fluoride salts are both thermally stable and with proper chemistry control can be relatively chemically inert. Fluoride salts can, however, be highly corrosive depending on the container materials selected, the salt chemistry, and the operating procedures used. The report also provides an overview of the state-of-the-art in reduction-oxidation chemistry control methodologies employed to minimize salt corrosion as well as providing a general discussion of heat transfer loop operational issues such as start-up procedures and freeze-up vulnerability.

  15. The absorption and excretion of fluoride and arsenic in humans.

    PubMed

    Zheng, Yujian; Wu, Jiyao; Ng, Jack C; Wang, Guoquan; Lian, Wu

    2002-07-01

    The absorption and excretion of fluoride and arsenic were measured in a group of healthy volunteers given drinking water with naturally high concentration of fluoride (F 2.3 mg/l)(,) or high concentration of arsenic (As 0.15 mg/l), or high concentrations of both fluoride and arsenic (F 2.25 mg/l, As 0.23 mg/l and F 4.05 mg/l, As 0.58 mg/l), respectively. The results indicated that, for arsenic, the absorption rate, the proportion of urinary excretion and the biological-half-life did not show statistically significant differences between drinking water containing high arsenic alone and drinking water containing different levels of high arsenic and fluoride. Excretion and retention of arsenic were positively correlated to the total arsenic intake. Similar results were observed for fluoride. This suggests that there are different metabolic processes for arsenic and fluoride in respect to absorption and excretion; and no joint action can be attributed by these two elements. PMID:12076512

  16. Heavy metal fluoride glass fibers and their applications

    NASA Astrophysics Data System (ADS)

    Saad, Mohammed

    2011-12-01

    The availability of high quality optical fibers with transmission window, larger than that of silica fiber, extends the use of optical fibers and open new application fields. There is increasing demand of optical fiber with transmission over 2 microns, where silica is opaque, for applications as diverse as sensing, fiber lasers and amplifiers, defense (IRCM), spectroscopy... No materials can fulfill all applications needs. Engineers have to make some compromise when choosing the right materials for the right application. Heavy metal fluoride glass is one of these materials. The glass, under bulk form, has a wide transmission window from 0.3 up to 8 microns, without any absorption peaks. Heavy metal fluoride glass fibers are drawn using the preform technique, the same technique used for silica fiber. This technique has proven to allow good control of fiber dimensions and geometry. Fluoride glass fibers with different exotics shapes have already been obtained, such as D-shaped, square, of centered fiber, multi cladding fibers and microstructured fibers.... As far as active fibers are concerned, heavy metal fluoride glasses have low phonon energy and can contain high concentration of active ions, rare-earth elements. Therefore, new laser lines have been already demonstrated using fluoride glass fibers. Fiber lasers with output power exceeding 10 w have been obtained by different groups. This paper will present the latest development of fluoride glass fiber technology, including fibers optical and mechanical properties, fiber lasers and power handling.

  17. Fluoride, aluminum, and phosphate kinetics in cryolite workers.

    PubMed

    Grandjean, P; Hørder, M; Thomassen, Y

    1990-01-01

    Exposure to cryolite (Na3AlF6) dust may result in skeletal fluorosis. Eight male workers at a cryolite concentrator participated in a 4-day study after 5 days of vacation. Dust exposures were 0.16 to 21.2 mg/m3. Urine was collected before work began and during two 4-hour periods. Preshift urine fluoride concentrations increased during the week. Fluoride concentrations in postshift urine and serum both correlated with the dust exposures. Serum fluoride concentrations decreased with a half-life of 3.3 to 6.9 hours after work. Fluoride clearance was 40.5 to 76.5 mL/min at urinary flow rates of 0.89 to 2.21 mL/min. Serum aluminum concentrations varied without relation to the exposure, but the urinary aluminum excretion correlated with the fluoride levels. Preshift serum-phosphate concentrations increased significantly during the week, possibly indicating changes in mineral metabolism. For monitoring of individual uptake of cryolite dust, serum fluoride measurements are most useful. PMID:2324845

  18. Mechanistic understanding of enamel mineralization under fluoride regime.

    PubMed

    Aoba, T; Taya, Y; Sato, A; Shimada, T; Mura-Galelli, M J

    1995-01-01

    In order to learn more about how the microenvironment for enamel mineralization is modified by fluoride at low concentrations (0 through 1 ppm) and how excess fluoride retards the degradation and removal of amelogenins, we studied precipitation reactions in an in vitro model utilizing a dialysis chamber. The results showed that, with the limited supply of Ca ions through the ultrafiltration membrane, the solution composition surrounding the seed crystals showed a proximity to the steady-state condition after 12-24 h equilibration. Major findings were that (a) fluoride overcame partially the inhibition of precipitation and growth reactions by enamel proteins and (b), with this accelerating effect of fluoride, the steady-state Ca concentrations in the media surrounding the seed crystals decreased substantially as a function of fluoride concentration. The overall results support the concept that the presence of fluoride in the mineralizing milieu can modify markedly the steady-state concentrations of mineral lattice ions, particularly decreasing free Ca2+ concentrations, which in turn may modulate protease activities in situ. PMID:7554946

  19. Tablet fluoridation influences the calcification of primary tooth pulp.

    PubMed

    Holtgrave, E A; Hopfenmüller, W; Ammar, S

    2001-01-01

    This study was conducted to determine the influence of long-term tablet fluoridation on primary pulp calcification by light microscopy. Twenty-four caries-free primary molars (after continuous postpartally initiated 1- to 10-year tablet fluoridation) were compared to 17 primary molars of children without fluoride prophylaxis. Pulp calcification in children with tablet fluoridation was significantly more frequent and more pronounced than in untreated children (p = 0.001). Besides the known pulp stones, the prophylaxis group evidenced a special form of calcification consisting of fibrodentin-like hard tissue not observed in the untreated children. These hard tissue bodies developed "intramurally" on the pulp floor and the inside of the dental roots with an irregular extramural spread into the coronal and radicular pulp by displacement and fibrotization of the pulp tissue. Moreover, some of the teeth had more or less extensive areas of interglobular dentin. The affected teeth were ankylosed in the area of the bi- and trifurcation and on the inside of the roots and were thus infra-occluded. Although the duration of tablet fluoridation has no statistically significant influence on pulp calcification, there is a correlation between extensive pulp calcification, postnatally initiated fluoride prophylaxis and the infraocclusion of primary molars. PMID:11227204

  20. Phosphate reduction in a hydroxyapatite fluoride removal system

    NASA Astrophysics Data System (ADS)

    Egner, A.

    2012-12-01

    Fluorosis is a widespread disease that occurs as a result of excess fluoride consumption and can cause severe tooth and bone deformations. To combat fluorosis, several previous studies have examined the potential to replace traditional bone char filters with synthetic hydroxyapatite. Calcite particles with a synthetic hydroxyapatite coating have been shown to effectively removed fluoride, yet the low-cost method for forming these particles leaves high amounts of phosphate both in synthesis waste-water and in filter effluent. High phosphate in filter effluent is problematic because consumption of extremely high phosphate can leach calcium from bones, further exacerbating the fluoride effect. This study examines ways of reducing and reusing waste. In particular, a method of fluoride removal is explored in which fluorapatite coatings may be formed directly. In preliminary studies, batches of 4.1g of Florida limestone (<710 μm) were equilibrated with 100 mL of 10ppm fluoride. In a control batch containing lime but no added phosphate, 14% treatment was achieved, but with added phosphate, 100% treatment was achieved in all batches. Batches with lower levels of phosphate took longer to reach 100% treatment, ranging from less than 24 hours in the highest phosphate batches to approximately 42 hours in the lowest batches. The lower levels tested were well within reasonable levels for drinking water and reached 0ppm fluoride in 42 hours or less.

  1. The fluoride content of antlers as an indicator of fluoride exposure in red deer (Cervus elaphus): A historical biomonitoring study.

    PubMed

    Kierdorf, U; Kierdorf, H

    2000-01-01

    Bone fluoride concentrations were analyzed in 141 red deer antlers grown between the 17th/early 18th century and 1997, that originated from four study areas (Arnsberg, Bad Berleburg, Dämmerwald, Schmidtheim) in the federal state of North Rhine-Westphalia, Germany. Fluoride concentrations in the specimens ranged between 27.7 and 1, 392.1 mg F(-)/kg ash and varied significantly both between samples collected during different time-spans in the same area and between samples taken from different study areas over the same period. For antlers (n = 8) collected prior to 1860 in the study areas Arnsberg and Schmidtheim, values between 27.7 and 78.7 mg F(-)/kg ash were recorded. It is assumed that antler fluoride contents in this range are quite close to baseline levels for these regions, i.e., represent concentrations largely unaffected or only slightly influenced by fluoride from anthropogenic sources. With the onset and expansion of large-scale industrial activities, bone fluoride concentrations in the antler samples markedly increased over these baseline values, indicating fluoride deposition from industrial emissions into the red deer habitats. In the later 1980s and the 1990s, a pronounced decline in antler fluoride content was observed, which is attributed to the reduction of industrial fluoride discharges due to effective emission control programs. However, even the lowest fluoride values recorded for antlers grown in the 1990s (study area Schmidtheim, n = 10, range 158.5-367.3 mg F(-)/kg ash) clearly exceeded the concentrations found in the antlers collected prior to 1860, thereby indicating an additional fluoride burden from anthropogenic sources on the recent populations. The present study has corroborated the view that antlers are good indicators of fluoride exposure in deer. The facts that they grow during a seasonally fixed time-span and thus constitute relatively well "naturally standardized" samples and are often kept over long periods of time make antlers

  2. High Temperature Fluoride Salt Test Loop

    SciTech Connect

    Aaron, Adam M.; Cunningham, Richard Burns; Fugate, David L.; Holcomb, David Eugene; Kisner, Roger A.; Peretz, Fred J.; Robb, Kevin R.; Wilson, Dane F.; Yoder, Jr, Graydon L.

    2015-12-01

    Effective high-temperature thermal energy exchange and delivery at temperatures over 600°C has the potential of significant impact by reducing both the capital and operating cost of energy conversion and transport systems. It is one of the key technologies necessary for efficient hydrogen production and could potentially enhance efficiencies of high-temperature solar systems. Today, there are no standard commercially available high-performance heat transfer fluids above 600°C. High pressures associated with water and gaseous coolants (such as helium) at elevated temperatures impose limiting design conditions for the materials in most energy systems. Liquid salts offer high-temperature capabilities at low vapor pressures, good heat transport properties, and reasonable costs and are therefore leading candidate fluids for next-generation energy production. Liquid-fluoride-salt-cooled, graphite-moderated reactors, referred to as Fluoride Salt Reactors (FHRs), are specifically designed to exploit the excellent heat transfer properties of liquid fluoride salts while maximizing their thermal efficiency and minimizing cost. The FHR s outstanding heat transfer properties, combined with its fully passive safety, make this reactor the most technologically desirable nuclear power reactor class for next-generation energy production. Multiple FHR designs are presently being considered. These range from the Pebble Bed Advanced High Temperature Reactor (PB-AHTR) [1] design originally developed by UC-Berkeley to the Small Advanced High-Temperature Reactor (SmAHTR) and the large scale FHR both being developed at ORNL [2]. The value of high-temperature, molten-salt-cooled reactors is also recognized internationally, and Czechoslovakia, France, India, and China all have salt-cooled reactor development under way. The liquid salt experiment presently being developed uses the PB-AHTR as its focus. One core design of the PB-AHTR features multiple 20 cm diameter, 3.2 m long fuel channels

  3. Toothbrush resistance and fluoride retention of sound, etched, fluoridated, and remineralized bovine enamel.

    PubMed

    Valk, J W; Duijsters, P P; Davidson, C L

    1986-04-01

    The wear resistance of tooth enamel that had undergone eight different treatments regarding the bonding procedure has been investigated. In comparison to sound enamel, the outer 3 microns of the etched-surface enamel show a decreased wear resistance against toothbrushing in vitro. Remineralization, either direct or preceded by acidified phosphated fluoride (APF) application, did not improve the wear resistance. The prophylactic effect of the APF treatment of etched enamel is considerable and is not lost after the soft, outer surface layer has worn off. PMID:3457528

  4. PRODUCTION OF PLUTONIUM FLUORIDE FROM BISMUTH PHOSPHATE PRECIPITATE CONTAINING PLUTONIUM VALUES

    DOEpatents

    Brown, H.S.; Bohlmann, E.G.

    1961-05-01

    A process is given for separating plutonium from fission products present on a bismuth phosphate carrier. The dried carrier is first treated with hydrogen fluoride at between 500 and 600 deg C whereby some fission product fluorides volatilize away from plutonium tetrafluoride, and nonvolatile fission product fluorides are formed then with anhydrous fluorine at between 400 and 500 deg C. Bismuth and plutonium distill in the form of volatile fluorides away from the nonvolatile fission product fluorides. The bismuth and plutonium fluorides are condensed at below 290 deg C.

  5. Chemico-therapeutic approach to prevention of dental caries. [using stannous fluoride gel

    NASA Technical Reports Server (NTRS)

    Shannon, I. L.

    1975-01-01

    The program of chemical preventive dentistry is based primarily upon the development of a procedure for stabilizing stannous fluoride in solution by forcing it into glycerin. New topical fluoride treatment concentrates, fluoride containing gels and prophylaxis pastes, as well as a completely stable stannous fluoride dentifrice are made possible by the development of a rather complicated heat application method to force stannous fluoride into solution in glycerin. That the stannous fluoride is clinically effective in such a preparation is demonstrated briefly on orthodontic patients.

  6. [The role of topical fluorides in the prevention of dental caries].

    PubMed

    Czukor, J

    1990-06-01

    Employment of fluorides means the employment of methods and processes which aim at increasing the fluoride concentration of the tooth surface. Methods requiring cooperation of experts (dentist, mouth hygienist) mean application of fluoride compounds of higher concentration at given periods (3 to 6 months). Methods not requiring professional cooperation prefer frequent (daily) employment of products of low concentration (toothpastes, mouthwashes etc.). In countries where such fluoride containing oral hygiene products are used extensively and systematically, frequency of caries significantly decreases. By topically employed fluorides the beneficial effect of the systemic fluoride use, (drinking water, salt, tablets) is increased. PMID:2387422

  7. High Fluoride and Geothermal Activities In Continental Rift Zones, Ethiopia

    NASA Astrophysics Data System (ADS)

    Weldesenbet, S. F.; Wohnlich, S.

    2012-12-01

    The Central Main Ethiopian Rift basin is a continental rift system characterized by volcano-tectonic depression endowed with huge geothermal resource and associated natural geochemical changes on groundwater quality. Chemical composition of groundwater in the study area showed a well defined trend along flow from the highland and escarpment to the rift floor aquifer. The low TDS (< 500mg/l) Ca-Mg-HCO3 dominated water at recharge area in the highlands and escarpments evolve progressively into Ca-Na-HCO3 and Na-Ca-HCO3 type waters along the rift ward groundwater flow paths. These waters finally appear as moderate TDS (mean 960mg/l) Na-HCO3 type and as high TDS (> 1000 mg/l) Na-HCO3-Cl type in volcano-lacustrine aquifers of the rift floor. High concentrations of fluoride (up to 97.2 mg/l) and arsenic (up to 98μg/l) are recognized feature of groundwaters which occur mostly in the vicinity of the geothermal fields and the rift lakes in the basin. Fluoride and arsenic content of dry volcaniclastic sediments close to these areas are in the range 666-2586mg/kg and 10-13mg/kg respectively. The relationship between fluoride and calcium concentrations in groundwaters showed negative correlation. Near-equilibrium state attained between the mineral fluorite (CaF2) and the majority of fluoride-rich (>30mg/l) thermal groundwater and shallow cold groundwater. This indicated that the equilibrium condition control the high concentration of fluoride in the groundwaters. Whereas undersaturation state of fluorite in some relatively low-fluoride (<30mg/l) thermal waters indicated a dilution by cold waters. Laboratory batch leaching experiments showed that fast dissolution of fluoride from the sediment samples suddenly leached into the interacting water at the first one hour and then remain stable throughout the experiment. The concentrations of leached fluoride from the hot spring deposits, the lacustrine sediments, and the pyroclastic rock are usually low (1% of the total or less than

  8. Fluoride and Geothermal Activities In Continental Rift Zones, Ethiopia

    NASA Astrophysics Data System (ADS)

    Weldesenbet, S. F.

    2012-12-01

    The Central Main Ethiopian Rift basin is a continental rift system characterized by volcano-tectonic depression endowed with huge geothermal resource and associated natural geochemical changes on groundwater quality. Chemical composition of groundwater in the study area showed a well defined trend along flow from the highland and escarpment to the rift floor aquifer. The low TDS (< 500mg/l) Ca-Mg-HCO3 dominated water at recharge area in the highlands and escarpments evolve progressively into Ca-Na-HCO3 and Na-Ca-HCO3 type waters along the rift ward groundwater flow paths. These waters finally appear as moderate TDS (mean 960mg/l) Na-HCO3 type and as high TDS (> 1000 mg/l) Na-HCO3-Cl type in volcano-lacustrine aquifers of the rift floor. High concentrations of fluoride (up to 97.2 mg/l) and arsenic (up to 98μg/l) are recognized feature of groundwaters which occur mostly in the vicinity of the geothermal fields and the rift lakes in the basin. Fluoride and arsenic content of dry volcaniclastic sediments close to these areas are in the range 666-2586mg/kg and 10-13mg/kg respectively. The relationship between fluoride and calcium concentrations in groundwaters showed negative correlation. Near-equilibrium state attained between the mineral fluorite (CaF2) and the majority of fluoride-rich (>30mg/l) thermal groundwater and shallow cold groundwater. This indicated that the equilibrium condition control the high concentration of fluoride in the groundwaters. Whereas undersaturation state of fluorite in some relatively low-fluoride (<30mg/l) thermal waters indicated a dilution by cold waters. Laboratory batch leaching experiments showed that fast dissolution of fluoride from the sediment samples suddenly leached into the interacting water at the first one hour and then remain stable throughout the experiment. The concentrations of leached fluoride from the hot spring deposits, the lacustrine sediments, and the pyroclastic rock are usually low (1% of the total or less than

  9. Quantitative infrared analysis of hydrogen fluoride

    SciTech Connect

    Manuta, D.M.

    1997-04-01

    This work was performed at the Portsmouth Gaseous Diffusion Plant where hydrogen fluoride is produced upon the hydrolysis of UF{sub 6}. This poses a problem for in this setting and a method for determining the mole percent concentration was desired. HF has been considered to be a non-ideal gas for many years. D. F. Smith utilized complex equations in his HF studies in the 1950s. We have evaluated HF behavior as a function of pressure from three different perspectives. (1) Absorbance at 3877 cm{sup -1} as a function of pressure for 100% HF. (2) Absorbance at 3877 cm{sup -1} as a function of increasing partial pressure HF. Total pressure = 300 mm HgA maintained with nitrogen. (3) Absorbance at 3877 cm{sup -1} for constant partial pressure HF. Total pressure is increased to greater than 800 mm HgA with nitrogen. These experiments have shown that at partial pressures up to 35mm HgA, HIF follows the ideal gas law. The absorbance at 3877 cm{sup -1} can be quantitatively analyzed via infrared methods.

  10. Characterization of cerium fluoride nanocomposite scintillators

    SciTech Connect

    Stange, Sy; Esch, Ernst I; Brown, Leif O; Couture, Aaron J; Mckigney, Edward A; Muenchausen, Ross E; Del Sesto, Rico E; Gilbertson, Robert D; Mccleskey, T Mark; Reifarth, Rene

    2009-01-01

    Measurement of the neutron capture cross-sections of a number of short-lived isotopes would advance both pure and applied scientific research. These cross-sections are needed for calculation of criticality and waste production estimates for the Advanced Fuel Cycle Initiative, for analysis of data from nuclear weapons tests, and to improve understanding of nucleosynthesis. However, measurement of these cross-sections would require a detector with a faster signal decay time than those used in existing neutron capture experiments. Crystals of faster detector materials are not available in sufficient sizes and quantities to supply these large-scale experiments. Instead, we propose to use nanocomposite detectors, consisting of nanoscale particles of a scintillating material dispersed in a matrix material. We have successfully fabricated cerium fluoride (CeF{sub 3}) nanoparticles and dispersed them in a liquid matrix. We have characterized this scintillator and have measured its response to neutron capture. Results of the optical, structural, and radiation characterization will be presented.

  11. Corneal welding with the hydrogen fluoride laser

    NASA Astrophysics Data System (ADS)

    Williams, John M.; Burstein, Neal L.; Nowicki, Michael J.; Jeffers, William Q.

    1994-06-01

    Our current study has looked at the use of a CW hydrogen fluoride laser to weld human cadaver corneas. The laser used was a Helios CL-II laser operating from 2.3 to 2.6 micrometers . A 6-mm full thickness linear incision was made in the center of the cornea. Two 10-0 nylon sutures were placed to hold the corneal stromal edges apposed during welding. Each specimen was mounted on a motorized micrometer stage. The beam was passed over the incision at a rate of between 0.5-2.0 mm per minute. After welding, the specimens were tested for wound strength by increasing intraocular pressure until the wound leaked. Two eyes had corneal welds performed and pressures of up to twice baseline intraocular pressure could be sustained after the stay sutures were removed. Light and electron microscopy demonstrated full thickness welds to be present. Electron micrographic sections demonstrated apparent interdigitation of collagen fibers between adjacent lamellae. Tissue welding may become an alternate means of wound closure in eye surgery.

  12. Selective separation of phosphate and fluoride from semiconductor wastewater.

    PubMed

    Warmadewanthi, B; Liu, J C

    2009-01-01

    Hydrofluoric acid (HF) and phosphoric acid (H(3)PO(4)) are widely used in semiconductor industry for etching and rinsing purposes. Consequently, significant amount of wastewater containing phosphate and fluoride is generated. Selective separation of phosphate and fluoride from the semiconductor wastewater, containing 936 mg/L of fluoride, 118 mg/L of phosphate, 640 mg/L of sulfate, and 26.7 mg/L of ammonia, was studied. Chemical precipitation and flotation reactions were utilized in the two-stage treatment processes. The first-stage reaction involved the addition of magnesium chloride (MgCl(2)) to induce selective precipitation of magnesium phosphate. The optimal condition was pH 10 and molar ratio, [Mg(2 + )]/[(PO(4) (3-))], of 3:1, and 66.2% of phosphate was removed and recovered as bobierrite (Mg(3)(PO(4))(2).8H(2)O). No reaction was found between MgCl(2) and fluoride. Calcium chloride (CaCl(2)) was used in the second-stage reaction to induce precipitation of calcium fluoride and calcium phosphate. The optimum molar ratio, [Ca(2 + )]/[F(-)], was 0.7 at pH 10, and residual fluoride concentration of 10.7 mg/L and phosphate concentration of lower than 0.5 mg/L was obtained. Thermodynamic equilibrium was modeled with PHREEQC and compared with experimental results. Sodium dodecylsulfate (SDS) was an effective collector for subsequent solid-liquid removal via dispersed air flotation (DiAF). The study demonstrated that phosphate can be selectively recovered from the wastewater. Potential benefits include recovery of phosphate for reuse, lower required dosage of calcium for fluoride removal, and less amount of CaF(2) sludge. PMID:19474500

  13. Influence of a fluoride mouthrinse on mutans streptococci in schoolchildren.

    PubMed

    Kaneko, Noboru; Yoshihara, Akihiro; Ida, Hirohisa; Nomura, Yoshiaki; Imai, Susumu; Nisizawa, Toshiki; Sakuma, Shihoko; Hanada, Nobuhiro; Miyazaki, Hideo

    2006-01-01

    This study aimed to determine whether the long-term use of a fluoride mouthrinse affects the salivary levels of mutans streptococci. Two hundred and fifteen schoolchildren (aged 9-10 years) participated. One hundred and forty-nine of these children had used a fluoride mouthrinse since 5 years of age at nursery school, and the remaining 66 children had not. DFT (decayed and filled teeth) was recorded, and the salivary levels of Streptococcus mutans and Streptococcus sobrinus were measured using mitis salivarius bacitracin agar. The group that had used a fluoride mouthrinse had a significantly lower prevalence of both S. mutans and S. sobrinus (p = 0.038) and a significantly lower DFT score (p < 0.001) than the other group. Using logistic regression analysis including caries experience at baseline as a dependent variable, the odds ratio of carrying S. mutans alone was 8.0 (p = 0.066) and that of carrying both S. mutans and S. sobrinus was 16.5 (p = 0.022) in the group that had not used the fluoride mouthrinse. Children carrying both S. mutans and S. sobrinus had a higher caries incidence in 1 year than the others, with odds ratios of 5.73 (p = 0.067) in the group with a fluoride mouthrinse and 3.47 (p = 0.035) in the group without it. These results show that the long-term use of a fluoride mouthrinse is associated with reduced salivary levels of mutans streptococci and this bacterial reduction may partly contribute to the suppression of dental caries in children using a long-term fluoride mouthrinse. PMID:17063021

  14. Effect of Fluoridated Sealants on Adjacent Tooth Surfaces

    PubMed Central

    Cagetti, M.G.; Carta, G.; Cocco, F.; Sale, S.; Congiu, G.; Mura, A.; Strohmenger, L.; Lingström, P.; Campus, G.

    2014-01-01

    A double-blind randomized clinical trial was performed in 6- to 7-yr-old schoolchildren to evaluate, in a 30-mo period, whether the caries increment on the distal surface of the second primary molars adjacent to permanent first molars sealed with fluoride release compounds would be lower with respect to those adjacent to permanent first molars sealed with a nonfluoridated sealant. In sum, 2,776 subjects were enrolled and randomly divided into 3 groups receiving sealants on sound first molars: high-viscosity glass ionomer cement (GIC group); resin-based sealant with fluoride (fluoride-RB group); and a resin-based sealant without fluoride (RB group). Caries (D1 – D3 level) was recorded on the distal surface of the second primary molar, considered the unit of analysis including only sound surfaces at the baseline. At baseline, no differences in caries prevalence were recorded in the 3 groups regarding the considered surfaces. At follow-up, the prevalence of an affected unit of analysis was statistically lower (p = .03) in the GIC and fluoride-RB groups (p = .04). In the GIC group, fewer new caries were observed in the unit of analysis respect to the other 2 groups. Incidence rate ratios (IRRs) were 0.70 (95% confidence interval: 0.50, 0.68; p < .01) for GIC vs. RB and 0.79 (95% confidence interval: 0.53, 1.04; p = .005) for fluoride-RB vs. RB. Caries incidence was significantly associated with low socioeconomic status (IRR = 1.18; 95% confidence interval: 1.10, 1.42; p = .05). Dental sealant high-viscosity GIC and fluoride-RB demonstrated protection against dental caries, and there was evidence that these materials afforded additional protection for the tooth nearest to the sealed tooth (clinical trial registration NCT01588210). PMID:24846910

  15. Fluoride inhibition of Sporosarcina pasteurii urease: structure and thermodynamics.

    PubMed

    Benini, Stefano; Cianci, Michele; Mazzei, Luca; Ciurli, Stefano

    2014-12-01

    Urease is a nickel-dependent enzyme and a virulence factor for ureolytic bacterial human pathogens, but it is also necessary to convert urea, the most worldwide used fertilizer, into forms of nitrogen that can be taken up by crop plants. A strategy to control the activity of urease for medical and agricultural applications is to use enzyme inhibitors. Fluoride is a known urease inhibitor, but the structural basis of its mode of inhibition is still undetermined. Here, kinetic studies on the fluoride-induced inhibition of urease from Sporosarcina pasteurii, a widespread and highly ureolytic soil bacterium, were performed using isothermal titration calorimetry and revealed a mixed competitive and uncompetitive mechanism. The pH dependence of the inhibition constants, investigated in the 6.5-8.0 range, reveals a predominant uncompetitive mechanism that increases by increasing the pH, and a lesser competitive inhibition that increases by lowering the pH. Ten crystal structures of the enzyme were independently determined using five crystals of the native form and five crystals of the protein crystallized in the presence of fluoride. The analysis of these structures revealed the presence of two fluoride anions coordinated to the Ni(II) ions in the active site, in terminal and bridging positions. The present study consistently supports an interaction of fluoride with the nickel centers in the urease active site in which one fluoride competitively binds to the Ni(II) ion proposed to coordinate urea in the initial step of the catalytic mechanism, while another fluoride uncompetitively substitutes the Ni(II)-bridging hydroxide, blocking its nucleophilic attack on urea. PMID:25113581

  16. Effect of exercise on fluoride metabolism in adult humans: a pilot study.

    PubMed

    V Zohoori, Fatemeh; Innerd, Alison; Azevedo, Liane B; Whitford, Gary M; Maguire, Anne

    2015-01-01

    An understanding of all aspects of fluoride metabolism is critical to identify its biological effects and avoid fluoride toxicity in humans. Fluoride metabolism and subsequently its body retention may be affected by physiological responses to acute exercise. This pilot study investigated the effect of exercise on plasma fluoride concentration, urinary fluoride excretion and fluoride renal clearance following no exercise and three exercise intensity conditions in nine healthy adults after taking a 1-mg Fluoride tablet. After no, light, moderate and vigorous exercise, respectively, the mean (SD) baseline-adjusted i) plasma fluoride concentration was 9.6(6.3), 11.4(6.3), 15.6(7.7) and 14.9(10.0) ng/ml; ii) rate of urinary fluoride excretion over 0-8 h was 46(15), 44(22), 34(17) and 36(17) μg/h; and iii) rate of fluoride renal clearance was 26.5(9.0), 27.2(30.4), 13.1(20.4) and 18.3(34.9) ml/min. The observed trend of a rise in plasma fluoride concentration and decline in rate of fluoride renal clearance with increasing exercise intensity needs to be investigated in a larger trial. This study, which provides the first data on the effect of exercise with different intensities on fluoride metabolism in humans, informs sample size planning for any subsequent definitive trial, by providing a robust estimate of the variability of the effect. PMID:26581340

  17. An Overview of Liquid Fluoride Salt Heat Transport Systems

    SciTech Connect

    Holcomb, David Eugene; Cetiner, Sacit M

    2010-09-01

    Heat transport is central to all thermal-based forms of electricity generation. The ever increasing demand for higher thermal efficiency necessitates power generation cycles transitioning to progressively higher temperatures. Similarly, the desire to provide direct thermal coupling between heat sources and higher temperature chemical processes provides the underlying incentive to move toward higher temperature heat transfer loops. As the system temperature rises, the available materials and technology choices become progressively more limited. Superficially, fluoride salts at {approx}700 C resemble water at room temperature being optically transparent and having similar heat capacity, roughly three times the viscosity, and about twice the density. Fluoride salts are a leading candidate heat-transport material at high temperatures. Fluoride salts have been extensively used in specialized industrial processes for decades, yet they have not entered widespread deployment for general heat transport purposes. This report does not provide an exhaustive screening of potential heat transfer media and other high temperature liquids such as alkali metal carbonate eutectics or chloride salts may have economic or technological advantages. A particular advantage of fluoride salts is that the technology for their use is relatively mature as they were extensively studied during the 1940s-1970s as part of the U.S. Atomic Energy Commission's program to develop molten salt reactors (MSRs). However, the instrumentation, components, and practices for use of fluoride salts are not yet developed sufficiently for commercial implementation. This report provides an overview of the current understanding of the technologies involved in liquid salt heat transport (LSHT) along with providing references to the more detailed primary information resources. Much of the information presented here derives from the earlier MSR program. However, technology has evolved over the intervening years, and

  18. Recommendations for fluoride limits in drinking water based on estimated daily fluoride intake in the Upper East Region, Ghana.

    PubMed

    Craig, Laura; Lutz, Alexandra; Berry, Kate A; Yang, Wei

    2015-11-01

    Both dental and skeletal fluorosis caused by high fluoride intake are serious public health concerns around the world. Fluorosis is particularly pronounced in developing countries where elevated concentrations of naturally occurring fluoride are present in the drinking water, which is the primary route of exposure. The World Health Organization recommended limit of fluoride in drinking water is 1.5 mg F(-) L(-1), which is also the upper limit for fluoride in drinking water for several other countries such as Canada, China, India, Australia, and the European Union. In the United States the enforceable limit is much higher at 4 mg F(-) L(-1), which is intended to prevent severe skeletal fluorosis but does not protect against dental fluorosis. Many countries, including the United States, also have notably lower unenforced recommended limits to protect against dental fluorosis. One consideration in determining the optimum fluoride concentration in drinking water is daily water intake, which can be high in hot climates such as in northern Ghana. The results of this study show that average water intake is about two times higher in Ghana than in more temperate climates and, as a result, the fluoride intake is higher. The results also indicate that to protect the Ghanaian population against dental fluorosis, the maximum concentration of fluoride in drinking water for children under 6-8 years should be 0.6 mg F(-) L(-1) (and lower in the first two years of life), and the limit for older children and adults should be 1.0 mg F(-) L(-1). However, when considering that water treatment is not cost-free, the most widely recommended limit of 1.5 mg F(-) L(-1) - which is currently the limit in Ghana--may be appropriate for older children and adults since they are not vulnerable to dental fluorosis once the tooth enamel is formed. PMID:26058000

  19. Fluoride and aluminum release from restorative materials using ion chromatography

    PubMed Central

    OKTE, Zeynep; BAYRAK, Sule; FIDANCI, Ulvi Reha; SEL, Tevhide

    2012-01-01

    Objective The aim of this study was to determine the amounts of fluoride and aluminum released from different restorative materials stored in artificial saliva and double-distilled water. Material and Methods Cylindrical specimens (10 x 1 mm) were prepared from 4 different restorative materials (Kavitan Plus, Vitremer, Dyract Extra, and Surefil). For each material, 20 specimens were prepared, 10 of which were stored in 5 mL artificial saliva and 10 of which were stored in 5 mL of double-distilled water. Concentrations of fluoride and aluminum in the solutions were measured using ion chromatography. Measurements were taken daily for one week and then weekly for two additional weeks. Data were analyzed using two-way ANOVA and Duncan's multiple range tests (p<0.05). Results The highest amounts of both fluoride and aluminum were released by the resin-modified glass ionomer cement Vitremer in double-distilled water (p<0.05). All materials released significantly more fluoride in double-distilled water than in artificial saliva (p<0.05). In artificial saliva, none of the materials were observed to release aluminum. Conclusion It was concluded that storage media and method of analysis should be taken into account when the fluoride and aluminum release from dental materials is assessed. PMID:22437674

  20. Aquaporin 5 Interacts with Fluoride and Possibly Protects against Caries.

    PubMed

    Anjomshoaa, Ida; Briseño-Ruiz, Jessica; Deeley, Kathleen; Poletta, Fernardo A; Mereb, Juan C; Leite, Aline L; Barreta, Priscila A T M; Silva, Thelma L; Dizak, Piper; Ruff, Timothy; Patir, Asli; Koruyucu, Mine; Abbasoğlu, Zerrin; Casado, Priscila L; Brown, Andrew; Zaky, Samer H; Bayram, Merve; Küchler, Erika C; Cooper, Margaret E; Liu, Kai; Marazita, Mary L; Tanboğa, İlknur; Granjeiro, José M; Seymen, Figen; Castilla, Eduardo E; Orioli, Iêda M; Sfeir, Charles; Owyang, Hongjiao; Buzalaf, Marília A R; Vieira, Alexandre R

    2015-01-01

    Aquaporins (AQP) are water channel proteins and the genes coding for AQP2, AQP5, and AQP6 are clustered in 12q13. Since AQP5 is expressed in serous acinar cells of salivary glands, we investigated its involvement in caries. DNA samples from 1,383 individuals from six groups were studied. Genotypes of eight single nucleotide polymorphisms covering the aquaporin locus were tested for association with caries experience. Interaction with genes involved in enamel formation was tested. The association between enamel microhardness at baseline, after creation of artificial caries lesion, and after exposure to fluoride and the genetic markers in AQP5 was tested. Finally, AQP5 expression in human whole saliva, after exposure to fluoride in a mammary gland cell line, which is known to express AQP5, and in Wistar rats was also verified. Nominal associations were found between caries experience and markers in the AQP5 locus. Since these associations suggested that AQP5 may be inhibited by levels of fluoride in the drinking water that cause fluorosis, we showed that fluoride levels above optimal levels change AQP5 expression in humans, cell lines, and rats. We have shown that AQP5 is involved in the pathogenesis of caries and likely interacts with fluoride. PMID:26630491

  1. Metal fluoride coatings prepared by ion-assisted deposition

    NASA Astrophysics Data System (ADS)

    Bischoff, Martin; Sode, Maik; Gäbler, Dieter; Bernitzki, Helmut; Zaczek, Christoph; Kaiser, Norbert; Tünnermann, Andreas

    2008-09-01

    ArF lithography technology requires minimization of optical losses due to scattering and absorption. Consequently, it is necessary to optimize the coating process of metal fluorides. The properties of metal fluoride thin films are mainly affected by the deposition methods, their parameters (temperature and deposition rate) and the vacuum conditions. A substrate temperature of more than 300°C is a condition for high density and low water content of metal fluorides. Therefore, a substrate temperature of 150°C results in inhomogeneous films with high water content. Until now, the best results were achieved by boat evaporation. This paper will demonstrate that most of the common metal fluorides like MgF2, AlF3, and even LaF3 can be deposited by electron beam evaporation. In comparison to other deposition methods, the prepared thin films have the lowest absorption in the VUV spectral range. Furthermore, metal fluoride thin films were prepared by ion assistance. It will be demonstrated, that they have less water content, high packing density, and low absorption in the VUV spectral range. In this study, single layers of LaF3 and AlF3 and antireflection coatings were prepared by electron beam evaporation with and without ion-assistance. The mechanical, structural, and optical properties were examined and discussed.

  2. Microscopic study of hydroxyapatite dissolution as affected by fluoride ions.

    PubMed

    Kwon, Ki-Young; Wang, Eddie; Nofal, Michel; Lee, Seung-Wuk

    2011-05-01

    Fluoride ions play a critical role in preventing tooth decay. We investigated the microscopic effects of fluoride ions on hydroxyapatite (100) surface dissolution using in situ atomic force microscopy. In the presence of 10 mM NaF, individual surface step retraction velocities decreased by about a factor of 5 as compared to NaF-free conditions. Importantly, elongated hexagonal etch pits, which are characteristic of (100) surface dissolution, were no longer observed when NaF was present. The alteration of pit shape is more distinct at a higher NaF concentration (50 mM) where triangular etch pits evolved during dissolution. Furthermore, in a fluoride concentration typical for tap water (10 μM), we observed roughening of individual step lines, resulting in the formation of scalloped morphologies. Morphological changes to individual steps across a wide range of fluoride concentrations suggest that the cariostatic capabilities of fluoride ions originate from their strong interactions with molecular steps. PMID:21456602

  3. Fluorides in groundwater and its impact on health.

    PubMed

    Shailaja, K; Johnson, Mary Esther Cynthia

    2007-04-01

    Fluoride is a naturally occurring toxic mineral present in drinking water and causes yellowing of teeth, tooth problems etc. Fluorspar, Cryolite and Fluorapatite are the naturally occurring minerals, from which fluoride finds its path to groundwater through infiltration. In the present study two groundwater samples, Station I and Station II at Hyderabad megacity, the capital of Andhra Pradesh were investigated for one year from January 2001 to December 2001. The average fluoride values were 1.37 mg/l at Station I and 0.91 mg/l at Station II. The permissible limit given by BIS (1983) 0.6-1.2 mg/l and WHO (1984) 1.5 mg/l for fluoride in drinking water. The groundwaters at Station I exceeded the limit while at Station II it was within the limits. The study indicated that fluoride content of 0.5 mg/l is sufficient to cause yellowing of teeth and dental problems. PMID:17915775

  4. Aquaporin 5 Interacts with Fluoride and Possibly Protects against Caries

    PubMed Central

    Deeley, Kathleen; Poletta, Fernardo A.; Mereb, Juan C.; Leite, Aline L.; Barreta, Priscila A. T. M.; Silva, Thelma L.; Dizak, Piper; Ruff, Timothy; Patir, Asli; Koruyucu, Mine; Abbasoğlu, Zerrin; Casado, Priscila L.; Brown, Andrew; Zaky, Samer H.; Bayram, Merve; Küchler, Erika C.; Cooper, Margaret E.; Liu, Kai; Marazita, Mary L.; Tanboğa, İlknur; Granjeiro, José M.; Seymen, Figen; Castilla, Eduardo E.; Orioli, Iêda M.; Sfeir, Charles; Owyang, Hongjiao; Buzalaf, Marília A. R.; Vieira, Alexandre R.

    2015-01-01

    Aquaporins (AQP) are water channel proteins and the genes coding for AQP2, AQP5, and AQP6 are clustered in 12q13. Since AQP5 is expressed in serous acinar cells of salivary glands, we investigated its involvement in caries. DNA samples from 1,383 individuals from six groups were studied. Genotypes of eight single nucleotide polymorphisms covering the aquaporin locus were tested for association with caries experience. Interaction with genes involved in enamel formation was tested. The association between enamel microhardness at baseline, after creation of artificial caries lesion, and after exposure to fluoride and the genetic markers in AQP5 was tested. Finally, AQP5 expression in human whole saliva, after exposure to fluoride in a mammary gland cell line, which is known to express AQP5, and in Wistar rats was also verified. Nominal associations were found between caries experience and markers in the AQP5 locus. Since these associations suggested that AQP5 may be inhibited by levels of fluoride in the drinking water that cause fluorosis, we showed that fluoride levels above optimal levels change AQP5 expression in humans, cell lines, and rats. We have shown that AQP5 is involved in the pathogenesis of caries and likely interacts with fluoride. PMID:26630491

  5. Biological chick procedure to determine fluoride availability in sepiolite.

    PubMed

    Tortuero, F

    1992-12-01

    1. A modified fluoride (F) bioassay procedure based on the method of standard additions and using chicks was tested for the determination of F availability in sepiolite. Chicks were distributed between a control group fed on a basal diet and experimental groups fed on this diet supplemented with 100, 200 or 300 mg/kg F as sodium fluoride. A further group was fed on the basal diet plus 2 g/kg sepiolite. 2. Body weight gain and food consumption during a 60 or 90 d study were similar for all treatments. 3. Ileal digestibility of F from the basal diet or from the diet supplemented with 200 mg/kg F as sodium fluoride was higher (0.907) than for chicks fed on the sepiolite diet (0.152). 4. Increases in the F contents of tibia ash were linearly related to dietary F concentration as sodium fluoride. 5. F contents of tibiae from the sepiolite group (at 60 or 90 d of age) were plotted against tibia F concentrations from groups receiving additional sodium fluoride in the diet. A weighted regression was performed. The values obtained for the relative available F from sepiolite were 0.213 and 0.150, respectively, at 60 and 90 d of age. PMID:1493555

  6. Corrosion Behavior of Titanium Grade 7 in Fluoride-Containing NaCl Brines

    SciTech Connect

    Lian, T; Whalen, M T; Wong, L

    2004-10-25

    The effects of fluoride on the corrosion behavior of Titanium Grade 7 (0.12-0.25% Pd) have been investigated. Up to 0.1 mol/L fluoride was added to the NaCl brines at 95 C, and three pH values of 4, 8, and 11 were selected for studying pH dependence of fluoride effects. It was observed that fluoride significantly altered the anodic polarization behavior, at all three pH values of 4, 8, and 11. Under acidic condition fluoride caused active corrosion. The corrosion of Titanium grade 7 was increased by three orders of magnitude when a 0.1 mol/L fluoride was added to the NaCl brines at pH 4, and the Pd ennoblement effect was not observed in acidic fluoride-containing environments. The effects of fluoride were reduced significantly when pH was increased to 8 and above.

  7. Effects of fluoride in mulberry leaves on the growth and development of silkworm

    SciTech Connect

    Wang Chia-hsi; Qian Da-fu; Li Zheng-fang; Gao Xu-ping

    1980-01-01

    The effects of fluorides on mulberry and silkworm were investigated. The results had shown that polluted mulberry leaves which contain more than 30 parts per million fluorides (dry wt.) may induce acute damage to silkworm. 6 tables.

  8. THE EQUILIBRIUM FLUORIDE CAPACITY OF ACTIVATED ALUMINA. DETERMINATION OF THE EFFECTS OF PH AND COMPETING IONS

    EPA Science Inventory

    This report describes research on the determination of the equilibrium fluoride adsorption capacity of small columns of acid pretreated activated alumina (Alcoa F-1 grade). The experimental observations verified the expectation that fluoride is very favorably adsorbed in preferen...

  9. Studies on the tolerance limit of fluoride in food in China

    SciTech Connect

    Chen, S.L.; Gong, Y.J.; Fu, Y.G. )

    1988-10-01

    To estimate the appropriate tolerance limit of fluoride in food in China, fluoride-related endemic diseases, background levels of fluoride in foods, and daily total intake of fluoride per capita were studied in addition to the subchronic toxicity test of fluoride in rats. In the general population, the daily total intake of fluoride from food, water, and air is 1.45-3.15 mg per capita. On the basis of these results and other information, it is suggested that the ADI of fluoride in the Chinese population should be 3.5 mg per capita, or 0.058 mg/kg body wt, and the tolerance limit of fluoride should be 1.0 ppm in rice, wheat flour, vegetables, and freshwater fish.

  10. Thermodynamic modeling of hydrogen fluoride production relevant to actinide residue treatment

    SciTech Connect

    West, M.H.; Axler, K.M.

    1995-02-01

    This report addresses issues specific to generation of hydrogen fluoride via reaction of calcium fluoride with sulfuric acid. This process has been established on a commercial scale and is under consideration for treatment of calcium fluoride residues from uranium processing. Magnesium fluoride slags are also available as a product of uranium processing. The technique of using sulfuric acid for the production of hydrogen fluoride from magnesium fluoride is also under consideration as a residue processing scheme. In the current study, thermodynamic modeling was used to investigate these chemical processing systems. Results presented herein reveal information relevant to selection of processing temperatures and conditions. Details include predicted effects in system composition based on operating temperatures for both the calcium fluoride and the magnesium fluoride systems.

  11. POSS-containing red fluorescent nanoparticles for rapid detection of aqueous fluoride ions.

    PubMed

    Du, Fanfan; Bao, Yinyin; Liu, Bin; Tian, Jiao; Li, Qianbiao; Bai, Ruke

    2013-05-21

    Polyhedral oligomeric silsesquioxane (POSS)-containing red fluorescent nanoparticles were designed and prepared for rapid detection of aqueous fluoride ions by virtue of the fluoride-triggered self-quenching of perylene bisimide dyes in nanoparticle cores. PMID:23575958

  12. SUMMARY REVIEW OF HEALTH EFFECTS ASSOCIATED WITH HYDROGEN FLUORIDE AND RELATED COMPOUNDS: HEALTH ISSUE ASSESSMENT

    EPA Science Inventory

    The major natural sources of airborne hydrogen fluoride (HF) are volcanic activity, ocean spray, and crustal weathering of fluoride-containing rocks. Anthropogenic sources include emissions from industrial operations such as aluminum and fluorocarbon production, and uranium proce...

  13. Retention of fluoride from diets containing materials produced during aluminium smelting.

    PubMed

    Wright, D A; Thompson, A

    1978-07-01

    1. Using male rats, the availability of fluoride from five by products of the aluminium smelting industry was tested. This was done by considering the balance between fluoride administered in controlled diets and the total fluoride content of waste products eliminated over an experimental period of 1 week. 2. Results indicated that yields of available fluoride expressed as percentage weight of original material were cryolite (Na3ALF6), 45.9%; sodium fluoride (NaF), 41.7%; aluminium fluoride (AFL3.H20), 9.1%; mist eliminator grid solids (with CaF2), 9.4%; reclaimed alumina with adsorbed F, 0.27%. 3. Of the various tissues analysed for fluoride content, only the kidney and femur showed any significant correlation with the amounts of fluoride absorbed or retained. PMID:666997

  14. Dynamic yielding in lithium fluoride and aluminum

    NASA Astrophysics Data System (ADS)

    Sano, Yukio; Sano, Tomokazu

    2010-02-01

    At a time immediately after shock loading, a kink (a weak discontinuity or a discontinuity in slope) occurs at a position in an unsteady portion in a smooth plane wave front in a lithium fluoride single crystal (material IIIb) or in 1060-0 aluminum due to the instability of the wave front. After the occurrence of the kink, a zone is produced and broadened with time between a near steady precursor ahead of the kink and a plastic wave behind it in a weak-discontinuity plane wave by the difference in the propagation velocity between them. Stress relaxes in the zone, which is called a follower, and the precursor decay takes place due to the stress relaxation. During the decay process, the large increase in plastic flow occurs in the vicinity of the leading edge of the follower, causes yielding at the leading edge, and stabilizes the weak-discontinuity wave. The stress-strain (σ-ε) history caused by the follower rotates clockwise with time around the yield point. The rotation yields different σ-ε histories behind the point and therefore different types of the dynamic σ-ε relation. Dynamic yield phenomena are illustrated by showing the schematic diagrams of three different types of the dynamic σ-ε relation, which are caused by weak-discontinuity plane waves composed of a precursor C, a follower (i) C, (ii) I or II, or (iii) R' or Rb, and a plastic wave C behind the follower. Here C is the contraction (compression) wave, I and II are the degenerate contraction waves I and II, R' is the subrarefaction wave, and Rb is the rarefaction wave.

  15. Exposure to hydrogen fluoride: an experimental study in humans of concentrations of fluoride in plasma, symptoms, and lung function.

    PubMed Central

    Lund, K; Ekstrand, J; Boe, J; Søstrand, P; Kongerud, J

    1997-01-01

    OBJECTIVES: To study the absorption of inhaled hydrogen fluoride (HF) by measuring plasma fluorides and HF concentrations in the breathing zone during exposure to HF. A possible dose-effect relation was investigated by following airway symptoms and lung function-that is, forced expiratory volume in one second (FEV1) and forced vital capacity (FVC)-during and after exposure to HF. METHODS: 20 healthy, male volunteers were exposed for one hour to constant HF concentrations that ranged from 0.2 to 5.2 mg/m3; these concentrations are known to occur among potroom workers in the primary aluminium industry. Plasma fluorides were analysed before, during, and after exposure. Symptoms from the eyes and the upper and lower airways were registered and graded from 1 to 5 with a standardised questionnaire. RESULTS: The total symptom score was significantly increased at the end of exposure for all the subjects as a group (P < 0.01) and for the group exposed to HF below the present Norwegian standard for total fluorides 0.6 mg/m3 (P = 0.05). No change was detected in FEV15 although a significant decrease was found in FVC in the group exposed to fluorides below the hygienic standard (n = 9) and for the entire group (n = 23). Almost all the symptoms had disappeared four hours after the end of exposure. Symptom scores from the upper airways were significantly correlated with the HF concentration (r = 0.62, P = 0.002), the change in plasma fluoride concentration (delta C) (r = 0.51, P = 0.01), and the maximum plasma fluoride concentration (Cmax) (r = 0.42, P = 0.05). A significant correlation was also found between the total symptom score for airways and the HF concentration. CONCLUSIONS: The present study showed a strong relation between inhaled HF and concentrations of fluoride in plasma. Upper airway and eye symptoms occurred after one hour of exposure to HF even when below the Norwegian hygienic standard for fluorides. PMID:9072031

  16. Reactions of p-toluenesulfonyl chloride with inorganic fluorides in heterogeneous systems

    SciTech Connect

    Krylov, E.N.; Mashkevich, I.V.

    1986-10-20

    The formation of p-toluenesulfonyl fluoride in the heterogeneous reactions of p-toluenesulfonyl chloride with inorganic fluorides in dipolar aprotic solvents becomes faster in the series of alkali metals from lithium to rubidium in parallel with the decrease in the crystal-lattice energies of the fluorides. In media if DMF and dimethylacetamide, even at 0/sup 0/C, after a relatively short reaction time p-toluenesulfonyl chloride is converted practically completely in the corresponding fluoride.

  17. Liquid Fluoride Salt Experimentation Using a Small Natural Circulation Cell

    SciTech Connect

    Yoder Jr, Graydon L; Heatherly, Dennis Wayne; Williams, David F; Elkassabgi, Yousri M.; Caja, Joseph; Caja, Mario; Jordan, John; Salinas, Roberto

    2014-04-01

    A small molten fluoride salt experiment has been constructed and tested to develop experimental techniques for application in liquid fluoride salt systems. There were five major objectives in developing this test apparatus: Allow visual observation of the salt during testing (how can lighting be introduced, how can pictures be taken, what can be seen) Determine if IR photography can be used to examine components submerged in the salt Determine if the experimental configuration provides salt velocity sufficient for collection of corrosion data for future experimentation Determine if a laser Doppler velocimeter can be used to quantify salt velocities. Acquire natural circulation heat transfer data in fluoride salt at temperatures up to 700oC All of these objectives were successfully achieved during testing with the exception of the fourth: acquiring velocity data using the laser Doppler velocimeter. This paper describes the experiment and experimental techniques used, and presents data taken during natural circulation testing.

  18. Complexation of Neptunium(V) with Fluoride at Elevated Temperatures

    SciTech Connect

    Rao, Linfeng; Tian, Guoxin; Xia, Yuanxian; Friese, Judah I.

    2008-06-16

    Complexation of neptunium(V) with fluoride at elevated temperatures was studied by spectrophotometry and microcalorimetry. Two successive complexes, NpO{sub 2}F(aq) and NpO{sub 2}F{sub 2}{sup -}, were identified by spectrophotometry in the temperature range of 10-70 C. Thermodynamic parameters, including the equilibrium constants and enthalpy of complexation between Np(V) and fluoride at 10-70 C were determined. Results show that the complexation of Np(V) with fluoride is endothermic and that the complexation is enhanced by the increase in temperature - a two-fold increase in the stability constants of NpO{sub 2}F(aq) and more than five-fold increase in the stability constants of NpO{sub 2}F{sub 2}{sup -} as the temperature is increased from 10 to 70 C.

  19. Texture evolution and infrared optical properties of praseodymium fluoride films

    NASA Astrophysics Data System (ADS)

    Su, Wei-Tao; Li, Bin; Liu, Ding-Quan; Zhang, Feng-Shan

    2007-10-01

    Praseodymium fluoride (PrF3) thin films were deposited on Ge(1 1 1) and zinc selenide substrates by molybdenum boat evaporation method. The crystal structures of thin film were characterized using XRD technique and the texture coefficients were calculated. The texture of praseodymium fluoride films changes from (3 0 2) to (1 1 0) texture when the temperature increases from 100 °C to 250 °C. Drastic tensile stress makes all the films covered by a network of fine cracks with width of nanometer-scale. The infrared transmission spectrum was measured to investigate the optical properties for all the films. The optical constants of praseodymium fluoride film were determined by using Lorentz oscillator model in the range from 8000 cm-1 to 500 cm-1.

  20. Sulfonyl fluoride inhibitors of fatty acid amide hydrolase.

    PubMed

    Alapafuja, Shakiru O; Nikas, Spyros P; Bharathan, Indu T; Shukla, Vidyanand G; Nasr, Mahmoud L; Bowman, Anna L; Zvonok, Nikolai; Li, Jing; Shi, Xiaomeng; Engen, John R; Makriyannis, Alexandros

    2012-11-26

    Sulfonyl fluorides are known to inhibit esterases. Early work from our laboratory has identified hexadecyl sulfonylfluoride (AM374) as a potent in vitro and in vivo inhibitor of fatty acid amide hydrolase (FAAH). We now report on later generation sulfonyl fluoride analogs that exhibit potent and selective inhibition of FAAH. Using recombinant rat and human FAAH, we show that 5-(4-hydroxyphenyl)pentanesulfonyl fluoride (AM3506) has similar inhibitory activity for both the rat and the human enzyme, while rapid dilution assays and mass spectrometry analysis suggest that the compound is a covalent modifier for FAAH and inhibits its action in an irreversible manner. Our SAR results are highlighted by molecular docking of key analogs. PMID:23083016

  1. Antimicrobial and fluoride release capacity of orthodontic bonding materials

    PubMed Central

    CALDEIRA, Érika Machado; OSÓRIO, Amanda; OBEROSLER, Edna Lúcia Couto; VAITSMAN, Delmo Santiago; ALVIANO, Daniela Sales; NOJIMA, Matilde da Cunha Gonçalves

    2013-01-01

    Objective The aim of this study was to evaluate the antimicrobial and fluoride releasing capacity of 3 bonding materials. Material and Methods Thirty nine specimens with standardized surface smoothness and dimensions were prepared. The antimicrobial capacity of the materials against S. mutans, L. casei and C. albicans was evaluated by determining the percentage of growth inhibition of these microorganisms in an inoculated medium, obtained by optical density readouts on a spectrophotometer. The potential to interfere in microbial growth on the surface of the studied materials was observed by means of scanning electron microscopy (SEM). The fluoride release capacity in ultrapure water for 14 days was analyzed by means of ion chromatography. Results The PLUS group presented the highest percentage of microbial inhibition and the most contamination-free surface. The FUJI group presented the best fluoride release capacity. Conclusions The TransbondTM Plus Color Change was the one that presented the best general behavior considering the evaluated aspects. PMID:24037071

  2. Risk Assessment of Fluoride Intake from Tea in the Republic of Ireland and its Implications for Public Health and Water Fluoridation.

    PubMed

    Waugh, Declan T; Potter, William; Limeback, Hardy; Godfrey, Michael

    2016-03-01

    The Republic of Ireland (RoI) is the only European Country with a mandatory national legislation requiring artificial fluoridation of drinking water and has the highest per capita consumption of black tea in the world. Tea is a hyperaccumulator of fluoride and chronic fluoride intake is associated with multiple negative health outcomes. In this study, fifty four brands of the commercially available black tea bag products were purchased and the fluoride level in tea infusions tested by an ion-selective electrode method. The fluoride content in all brands tested ranged from 1.6 to 6.1 mg/L, with a mean value of 3.3 mg/L. According to our risk assessment it is evident that the general population in the RoI is at a high risk of chronic fluoride exposure and associated adverse health effects based on established reference values. We conclude that the culture of habitual tea drinking in the RoI indicates that the total cumulative dietary fluoride intake in the general population could readily exceed the levels known to cause chronic fluoride intoxication. Evidence suggests that excessive fluoride intake may be contributing to a wide range of adverse health effects. Therefore from a public health perspective, it would seem prudent and sensible that risk reduction measures be implemented to reduce the total body burden of fluoride in the population. PMID:26927146

  3. Risk Assessment of Fluoride Intake from Tea in the Republic of Ireland and its Implications for Public Health and Water Fluoridation

    PubMed Central

    Waugh, Declan T.; Potter, William; Limeback, Hardy; Godfrey, Michael

    2016-01-01

    The Republic of Ireland (RoI) is the only European Country with a mandatory national legislation requiring artificial fluoridation of drinking water and has the highest per capita consumption of black tea in the world. Tea is a hyperaccumulator of fluoride and chronic fluoride intake is associated with multiple negative health outcomes. In this study, fifty four brands of the commercially available black tea bag products were purchased and the fluoride level in tea infusions tested by an ion-selective electrode method. The fluoride content in all brands tested ranged from 1.6 to 6.1 mg/L, with a mean value of 3.3 mg/L. According to our risk assessment it is evident that the general population in the RoI is at a high risk of chronic fluoride exposure and associated adverse health effects based on established reference values. We conclude that the culture of habitual tea drinking in the RoI indicates that the total cumulative dietary fluoride intake in the general population could readily exceed the levels known to cause chronic fluoride intoxication. Evidence suggests that excessive fluoride intake may be contributing to a wide range of adverse health effects. Therefore from a public health perspective, it would seem prudent and sensible that risk reduction measures be implemented to reduce the total body burden of fluoride in the population. PMID:26927146

  4. 40 CFR 415.550 - Applicability; description of the sodium fluoride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sodium fluoride production subcategory. 415.550 Section 415.550 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Fluoride Production Subcategory § 415.550 Applicability; description of the sodium fluoride production subcategory. The provisions of this subpart are applicable to discharges and to...

  5. 40 CFR 415.550 - Applicability; description of the sodium fluoride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... sodium fluoride production subcategory. 415.550 Section 415.550 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Fluoride Production Subcategory § 415.550 Applicability; description of the sodium fluoride production subcategory. The provisions of this subpart are applicable to discharges and to...

  6. Environmental characteristics of regional groundwater in relation to fluoride poisoning in North China

    NASA Astrophysics Data System (ADS)

    Liu, Yong; Zhu, Wan Hua

    1991-07-01

    More and more data indicated that high- or low-fluoride-bearing drinking water led to endemic diseases in which fluoride poisoning was caused by high levels of fluoride (fluoride ion content >1.0 mg/I) in drinking water. Fluoride poisoning in North China is characterized by pathological changes of bones and teeth. Much attention has been devoted to the study of fluoride-bearing groundwater in North China because regionally groundwater has been the main source of water supply, and fluoride poisoning has developed to the extent that it affects human health seriously. Results from the studies in North China summarized in this article indicate that regional high-fluoride-bearing groundwater has a regular distribution corresponding with the development of endemic fluoride poisoning and has something to do with paleogeographic and paleoclimatic conditions, geology, and hydrogeology, especially with types of hydrogeochemistry, pH value of groundwater, degree of mineralization, and so forth. High-fluoride-bearing groundwater in relation to fluorosis occurs mainly in North China, and many effective measures have been taken to reduce the fluoride content in drinking water and to cure the disease after analyzing the distribution and environmental characteristics of high-fluoride-bearing groundwater.

  7. 21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice...

  8. 21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 5 2012-04-01 2012-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice...

  9. 21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice...

  10. 21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice...

  11. 40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... SMCL for fluoride. 141.208 Section 141.208 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum...

  12. 40 CFR 415.550 - Applicability; description of the sodium fluoride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sodium fluoride production subcategory. 415.550 Section 415.550 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Fluoride Production Subcategory § 415.550 Applicability; description of the sodium fluoride production subcategory. The provisions of this subpart are applicable to discharges and to...

  13. 40 CFR 415.550 - Applicability; description of the sodium fluoride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sodium fluoride production subcategory. 415.550 Section 415.550 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Fluoride Production Subcategory § 415.550 Applicability; description of the sodium fluoride production subcategory. The provisions of this subpart are applicable to discharges and to...

  14. 40 CFR 142.61 - Variances from the maximum contaminant level for fluoride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... level for fluoride. 142.61 Section 142.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... from the maximum contaminant level for fluoride. (a) The Administrator, pursuant to section 1415(a)(1... means generally available for achieving compliance with the Maximum Contaminant Level for fluoride....

  15. 40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... SMCL for fluoride. 141.208 Section 141.208 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum...

  16. 40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SMCL for fluoride. 141.208 Section 141.208 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum...

  17. 40 CFR 142.61 - Variances from the maximum contaminant level for fluoride.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... level for fluoride. 142.61 Section 142.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... from the maximum contaminant level for fluoride. (a) The Administrator, pursuant to section 1415(a)(1... means generally available for achieving compliance with the Maximum Contaminant Level for fluoride....

  18. 40 CFR 415.550 - Applicability; description of the sodium fluoride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... sodium fluoride production subcategory. 415.550 Section 415.550 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Sodium Fluoride Production Subcategory § 415.550 Applicability; description of the sodium fluoride production subcategory. The provisions of this subpart are applicable to discharges and to...

  19. An In Vitro Study of the Effect of Fluoridated Milk on Oral Bacterial Biofilms

    PubMed Central

    Pratten, J.; Bedi, R.; Wilson, M.

    2000-01-01

    Microcosmic dental plaques were grown in artificial saliva and supplemented with either milk or fluoridated milk. The presence of fluoride in the milk increased the pH of the biofilms and reduced the proportions of streptococci, demonstrating that in this model, fluoridation of milk produces biofilms with reduced cariogenic potential. PMID:10742268

  20. 40 CFR 415.230 - Applicability; description of the aluminum fluoride production subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... aluminum fluoride production subcategory. 415.230 Section 415.230 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Fluoride Production Subcategory § 415.230 Applicability; description of the aluminum fluoride production subcategory. This subpart applies to discharges to waters of the United...

  1. 40 CFR 415.230 - Applicability; description of the aluminum fluoride production subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... aluminum fluoride production subcategory. 415.230 Section 415.230 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Fluoride Production Subcategory § 415.230 Applicability; description of the aluminum fluoride production subcategory. This subpart applies to discharges to waters of the United...

  2. 40 CFR 415.230 - Applicability; description of the aluminum fluoride production subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... aluminum fluoride production subcategory. 415.230 Section 415.230 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Fluoride Production Subcategory § 415.230 Applicability; description of the aluminum fluoride production subcategory. This subpart applies to discharges to waters of the United...

  3. 40 CFR 415.230 - Applicability; description of the aluminum fluoride production subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... aluminum fluoride production subcategory. 415.230 Section 415.230 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Fluoride Production Subcategory § 415.230 Applicability; description of the aluminum fluoride production subcategory. This subpart applies to discharges to waters of the United...

  4. 40 CFR 415.230 - Applicability; description of the aluminum fluoride production subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... aluminum fluoride production subcategory. 415.230 Section 415.230 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Aluminum Fluoride Production Subcategory § 415.230 Applicability; description of the aluminum fluoride production subcategory. This subpart applies to discharges to waters of the United...

  5. 21 CFR 355.70 - Testing procedures for fluoride dentifrice drug products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Testing procedures for fluoride dentifrice drug... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ANTICARIES DRUG PRODUCTS FOR OVER-THE-COUNTER HUMAN USE Testing Procedures § 355.70 Testing procedures for fluoride dentifrice drug products. (a) A fluoride dentifrice...

  6. 40 CFR 721.10340 - Potassium zinc fluoride (KZnF3).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Potassium zinc fluoride (KZnF3). 721... Substances § 721.10340 Potassium zinc fluoride (KZnF3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as potassium zinc fluoride (KZnF3) (PMN...

  7. 40 CFR 721.10340 - Potassium zinc fluoride (KZnF3).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Potassium zinc fluoride (KZnF3). 721... Substances § 721.10340 Potassium zinc fluoride (KZnF3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as potassium zinc fluoride (KZnF3) (PMN...

  8. 40 CFR 721.10340 - Potassium zinc fluoride (KZnF3).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Potassium zinc fluoride (KZnF3). 721... Substances § 721.10340 Potassium zinc fluoride (KZnF3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as potassium zinc fluoride (KZnF3) (PMN...

  9. Fluoride Consumption and Its Impact on Oral Health

    PubMed Central

    Jiménez-Farfán, María Dolores; Hernández-Guerrero, Juan Carlos; Juárez-López, Lilia Adriana; Jacinto-Alemán, Luis Fernando; de la Fuente-Hernández, Javier

    2011-01-01

    Objective The purpose of this study was to evaluate caries and dental fluorosis among Mexican preschoolers and school-aged children in a non-endemic zone for fluorosis and to measure its biological indicators. Methods DMFT, DMFS, dmft, dmfs, and CDI indexes were applied. Fluoride urinary excretion and fluoride concentrations in home water, table salt, bottled water, bottled drinks, and toothpaste were determined. Results Schoolchildren presented fluorosis (CDI = 0.96) and dental caries (DMFT = 2.64 and DMFS = 3.97). Preschoolers presented dmft = 4.85 and dmfs = 8.80. DMFT and DMFS were lower in children with mild to moderate dental fluorosis (DF). Variable fluoride concentrations were found in the analyzed products (home water = 0.18–0.44 ppm F, table salt = 0–485 ppm F, bottled water = 0.18–0.47 ppm F, juices = 0.08–1.42 ppm F, nectars = 0.07–1.30 ppm F, bottled drinks = 0.10–1.70 ppm F, toothpaste = 0–2,053 ppm F). Mean daily fluoride excretion was 422 ± 176 μg/24 h for schoolchildren and 367 ± 150 μg/24 h for preschoolers. Conclusions Data from our study show that, despite values of excretion within an optimal fluoride intake range, the prevalence of caries was significant in both groups, and 60% of the 11- to 12-year-old children presented with dental fluorosis. In addition, variable fluoride concentrations in products frequently consumed by children were found. PMID:21318021

  10. Mechanisms of fluoride release in sediments of Argentina's central region.

    PubMed

    Borgnino, L; Garcia, M G; Bia, G; Stupar, Y V; Le Coustumer, Ph; Depetris, P J

    2013-01-15

    We analyze the sources and mechanisms that control the release of fluoride from sediments collected from two types of aquatic reservoirs in the central region of Argentina: 1) mountainous rivers draining crystalline rocks from the Sierras Pampeanas ranges, and 2) shallow aquifers in loessic sediments. The assessment was performed on the basis of experimental work and the study of chemical and mineralogical characteristics of sediments in contact with F-rich waters of the studied region. The chemical and mineralogical compositions of sediments were analyzed by ICP/OES, DRX, and SEM-EDS. Batch experiments were conducted to evaluate the kinetics of fluoride release under variable pH and ionic composition of the solution. The enhanced release of fluoride at more acidic pH, the inhibition of release in Ca-rich solutions and the positive significant linear trends between Ca(2+) and fluoride concentrations suggest that the dissolution of a Ca/F-bearing phase (like fluorapatite) strongly controls the dynamics of fluoride in the early stages of water-sediment interaction, particularly under acidic conditions. Calculations revealed that the dissolution of an amount of FAp equivalent to that estimated in the studied sediments may widely account for the values measured in the leaching experiments at pH6, whatever the dominant cation in the solution. Under such conditions, dissolution of FAp (present as coatings onto glass surfaces or as detritic grains) is likely the major primary source of fluorine in the studied sediments. Contribution from biotite may be also considered as a source in fluvial sediments. When adequate surfaces are present the released anions may partially be scavenged from the solution by adsorption at acidic pH. Increasing alkalinity in the aquatic reservoirs may then release the adsorbed fluoride through desorption or through competition with other anionic species. Comparing both mechanisms, dissolution predominates at lower pH while desorption is the main

  11. Sol-gel process of fluoride and fluorobromide materials

    SciTech Connect

    Poncelet, O.; Guilment, J.; Paz-Pujalt, G.

    1996-12-31

    The alkoxides M(OR{sub x}){sub n} wherein M is an alkaline-earth or rare-earth and OR{sub X} is a fluoroalkoxo or bromoalkoxo group exhibit the properties to form pure fluoride materials by hydrolysis at room temperature. Using this property, the authors synthesized pure barium and europium fluoride and pure alkaline-earth bromide. The hydrolysis of a heteroleptic species, Ba(OCH{sub 2}CH{sub 2}Br)[OCH(CF{sub 3}){sub 2}] allowed pure and crystalline BaFBr materials to be obtained at room temperature.

  12. EPR, NMR and molecular dynamics in fluoride glasses

    NASA Astrophysics Data System (ADS)

    Silly, G.; Buzaré, J. Y.; Bureau, B.; Legein, C.; Boulard, B.

    1999-11-01

    This paper deals with the method of investigation of local order in Transition Metal Fluoride Glasses that has been developed in the past few years using magnetic resonance techniques associated to molecular dynamics calculations. The results presented here will concern lead fluoride PZG (PbF2-ZnF2-GaF3) glasses of the PbF2-MtIIF2-MtIIIF3 family, but the method remains valid for any other disordered compound. The only limitations are that the sample may be doped with transition metal ions (S⩾1) for EPR measurements or contain quadrupolar nuclei (I⩾1) to perform NMR investigations.

  13. Recovery of protactinium from molten fluoride nuclear fuel compositions

    DOEpatents

    Baes, C.F. Jr.; Bamberger, C.; Ross, R.G.

    1973-12-25

    A method is provided for separating protactinium from a molten fluonlde salt composition consisting essentially of at least one alkali and alkaline earth metal fluoride and at least one soluble fluoride of uranium or thorium which comprises oxidizing the protactinium in said composition to the + 5 oxidation state and contacting said composition with an oxide selected from the group consisting of an alkali metal oxide, an alkaline earth oxide, thorium oxide, and uranium oxide, and thereafter isolating the resultant insoluble protactinium oxide product from said composition. (Official Gazette)

  14. Fluoride and sodium trimetaphosphate (TMP) release from fluoride varnishes supplemented with TMP.

    PubMed

    Manarelli, Michele Mauricio; Delbem, Alberto Carlos Botazzo; Percinoto, Célio; Pessan, Juliano Pelim

    2016-05-20

    This study assessed fluoride (F) and sodium trimetaphosphate (TMP) release into artificial saliva from varnishes containing 0%, 2.5%, and 5% NaF, supplemented or not with 5% TMP. The varnishes were applied on polyester sheets (n = 8/group), and F and TMP released into artificial saliva were measured for up to 24 hours. The amount of F and TMP released were directly related to NaF and TMP concentrations in the varnishes. The highest F release was seen for 5% NaF and 5% NaF + 5% TMP, whereas 5% TMP released the highest amount of TMP. However, the simultaneous addition of NaF and TMP to varnishes significantly reduced the amount of F and TMP released from the products. PMID:27223137

  15. Fluoride rinse effect on retention of CaF2 formed on enamel/dentine by fluoride application.

    PubMed

    Falcão, Amanda; Masson, Nadia; Leitão, Tarcísio Jorge; Botelho, Juliana Nunes; Ferreira-Nóbilo, Naiara de Paula; Tabchoury, Cínthia Pereira Machado; Tenuta, Livia Maria Andaló; Cury, Jaime Aparecido

    2016-01-01

    Calcium fluoride-like materials ("CaF2") formed on dental surfaces after professional fluoride application are unstable in the oral environment but can be retained longer with a daily NaF mouthrinse. We tested the effect of twice daily 0.05% NaF rinses on the retention of "CaF2" formed on enamel and dentine after applying acidulated phosphate fluoride (APF). "CaF2" formed on enamel/dentine by APF application significantly decreased after exposure to artificial saliva and the 0.05% NaF rinse was ineffective to avoid this reduction. These findings suggest that the combination of APF and 0.05% NaF is not clinically relevant, either for caries or dental hypersensitivity. PMID:27050937

  16. Ion-assisted deposition of yttrium fluoride as a substitute for thorium fluoride: application to infrared antireflection coating on germanium

    NASA Astrophysics Data System (ADS)

    Robic, Jean-Yves; Rolland, Bernard; Deutsch, Jean-Claude; Gallais, Patrick

    1994-11-01

    Yttrium fluoride has been proposed as a substitute for thorium fluoride in anti-reflection coatings for the infrared range. We have studied the ion assisted deposition (IAD) of YF3 in order to obtain dense and low absorbency layers in the 8 to 12 mm spectral window. Refractive index and extinction coefficient of this fluoride were determined from spectrophotometry measurements. We have then associated the YF3 with ZnS and Ge layers so as to obtain four layer anti-reflection coatings on germanium. The stress induced by each layer in the coating was measured and the sum was shown to be equal to the stress of the total coating. Eventually, an industrial, high efficiency, both side anti-reflection coating on germanium was developed using IAD YF3 film.

  17. The mechanism for production of beryllium fluoride from the product of ammonium fluoride processing of beryllium- containing raw material

    NASA Astrophysics Data System (ADS)

    Kraydenko, R. I.; Dyachenko, A. N.; Malyutin, L. N.; Petlin, I. V.

    2016-06-01

    The technique of fluorite-phenacite-bertrandite ores from Russian Ermakovskoe deposit processing by ammonium bifluoride is described. To determine the temperature mode and the thermal dissociation mechanism of ammonium tetrafluoroberyllate (the product of ammonium-fluoride leaching of the ore) the TG/DTA have been carried out. By IR spectroscopy and XRD the semi-products of ammonium tetrafluoroberyllate thermal dissociation have been identified. The hygroscopic low-temperature beryllium fluoride forms higher than 380°C. The less hydroscopic form of BeF2 have been produced at 600°C.

  18. Fluoride in groundwater in selected villages in Eritrea (North East Africa).

    PubMed

    Srikanth, R; Viswanatham, K S; Kahsai, Fikremariam; Fisahatsion, Abraham; Asmellash, Micheal

    2002-04-01

    A study was undertaken to estimate fluoride content in the groundwater in certain parts of rural Eritrea. North-East Africa, along the River Anseba. Standard procedure was adopted for fluoride detection. Results indicate elevated concentration of fluoride in groundwater. The highest concentration was found to be 3.73 mg L(-1), well above the safety level for consumption. Geological basis for the high concentration of high fluoride has been established; it is presumed to be the pegmatite intrusion hosted by a granitic batholith. Extensive dental fluorosis has been observed in the population exposed to drinking water of high fluoride content. PMID:12002285

  19. On the assessment of hydroxyapatite fluoridation by means of Raman scattering

    SciTech Connect

    Campillo, M.; Valiente, M.; Lacharmoise, P. D.; Reparaz, J. S.; Goni, A. R.

    2010-06-28

    Hydroxyapatite is the main mineral component of bones and teeth. Fluorapatite, a bioceramic that can be obtained from hydroxyapatite by chemical substitution of the hydroxide ions with fluoride, exhibits lower mineral solubility and larger mechanical strength. Despite the widespread use of fluoride against caries, a reliable technique for unambiguous assessment of fluoridation in in vitro tests is still lacking. Here we present a method to probe fluorapatite formation in fluoridated hydroxyapatite by combining Raman scattering with thermal annealing. In synthetic minerals, we found that effectively fluoride substituted hydroxyapatite transforms into fluorapatite only after heat treatment, due to the high activation energy for this first order phase transition.

  20. On the assessment of hydroxyapatite fluoridation by means of Raman scattering

    NASA Astrophysics Data System (ADS)

    Campillo, M.; Lacharmoise, P. D.; Reparaz, J. S.; Goñi, A. R.; Valiente, M.

    2010-06-01

    Hydroxyapatite is the main mineral component of bones and teeth. Fluorapatite, a bioceramic that can be obtained from hydroxyapatite by chemical substitution of the hydroxide ions with fluoride, exhibits lower mineral solubility and larger mechanical strength. Despite the widespread use of fluoride against caries, a reliable technique for unambiguous assessment of fluoridation in in vitro tests is still lacking. Here we present a method to probe fluorapatite formation in fluoridated hydroxyapatite by combining Raman scattering with thermal annealing. In synthetic minerals, we found that effectively fluoride substituted hydroxyapatite transforms into fluorapatite only after heat treatment, due to the high activation energy for this first order phase transition.

  1. A probabilistic estimation of fluoride intake by infants up to the age of 4 months from infant formula reconstituted with tap water in the fluoridated regions of Ireland.

    PubMed

    Anderson, W A; Pratt, I; Ryan, M R; Flynn, A

    2004-01-01

    Two probabilistic models were developed to estimate the acute and chronic exposure to fluoride of exclusively formula-fed infants aged 0-4 months as a result of the consumption of infant formula reconstituted with fluoridated tap water in Ireland. The estimates were based on calculated infant formula consumption and accepted body weight standards, together with reported concentrations of fluoride in infant formula powder and measured values for the fluoride content of water in Ireland. The mean acute exposure of infants to fluoride on any single day in areas served by 387 fluoridated water supplies was estimated to be between 0.11 and 0.14 mg/kg body weight depending on age group (95th percentiles 0.2 and 0.26 mg/kg b.w., respectively). These predicted intakes were well below the intake of fluoride associated with acute toxic effects, which is considered to be 5 mg fluoride (F(-))/kg body weight. The mean chronic exposure of infants to fluoride was estimated to be between 0.106 and 0.170 mg/kg b.w./day depending on body weight (95th percentiles 0.108 and 0.172 mg/kg b.w./day, respectively). This estimate described the average daily fluoride intake of infants during the first 4 months of life residing in the areas served by 226 water supplies that achieved an average yearly fluoride concentration below 1.03 mg/l. Dental fluorosis may be considered to be the only risk at these low doses and from our work it is estimated that there is a very low risk of moderate dental fluorosis of the permanent dentition in infants exposed to fluoride at these levels. PMID:15316185

  2. Effect of Fluoride, Chlorhexidine and Fluoride-chlorhexidine Mouthwashes on Salivary Streptococcus mutans Count and the Prevalence of Oral Side Effects.

    PubMed

    Sadat Sajadi, Fatemeh; Moradi, Mohammad; Pardakhty, Abbas; Yazdizadeh, Razieh; Madani, Faezeh

    2015-01-01

    Background and aims. Streptococcus mutans is the main pathogenic agent involved in dental caries, and may be eliminated using mouthwashes. The objective of this study was to compare the effects of fluoride, chlorhexidine, and fluoride-chlorhexidine mouthwashes on salivary S. mutans count after two weeks of use and determine the prevalence of their side effects on the oral mucosa. Materials and methods. In this clinical trial, 120 12-14 year-old students were selected and divided into three groups. Each group was given one of fluoride, chlorhexidine, or fluoride-chlorhexidine mouthwashes. They were asked to use it twice a day for two weeks. Salivary samples were collected at baseline and after two weeks. Data were analyzed by Wilcoxon and Kruskal-Wallis tests. Results. In all the study groups, there were statistically significant reductions in salivary S. mutans counts two weeks after using the mouthwashes (P < 0.05). In addition, fluoride-chlorhexidine mouthwash had a significant effect on the reduction of S. mutans count in comparison with fluoride alone. The prevalence of oral side effects in fluoride-chlorhexidine mouth-wash was more than 90%. Conclusion. Adding fluoride to chlorhexidine mouthwash can significantly decrease salivary S. mutans count after two weeks. Fluoride-chlorhexidine has the highest rate of oral side effects between the evaluated mouthwash compounds. PMID:25973155

  3. Sustainable approach for recycling waste lamb and chicken bones for fluoride removal from water followed by reusing fluoride-bearing waste in concrete.

    PubMed

    Ismail, Zainab Z; AbdelKareem, Hala N

    2015-11-01

    Sustainable management of waste materials is an attractive approach for modern societies. In this study, recycling of raw waste lamb and chicken bones for defluoridation of water has been estimated. The effects of several experimental parameters including contact time, pH, bone dose, fluoride initial concentration, bone grains size, agitation rate, and the effect of co-existing anions in actual samples of wastewater were studied for fluoride removal from aqueous solutions. Results indicated excellent fluoride removal efficiency up to 99.4% and 99.8% using lamb and chicken bones, respectively at fluoride initial concentration of 10 mg F/L and 120 min contact time. Maximum fluoride uptake was obtained at neutral pH range 6-7. Fluoride removal kinetic was well described by the pseudo-second order kinetic model. Both, Langmuir and Freundlich isotherm models could fit the experimental data well with correlation coefficient values >0.99 suggesting favorable conditions of the process. Furthermore, for complete sustainable management of waste bones, the resulted fluoride-bearing sludge was reused in concrete mixes to partially replace sand. Tests of the mechanical properties of fluoride sludge-modified concrete mixes indicated a potential environmentally friendly approach to dispose fluoride sludge in concrete and simultaneously enhance concrete properties. PMID:26162903

  4. Effect of Fluoride, Chlorhexidine and Fluoride-chlorhexidine Mouthwashes on Salivary Streptococcus mutans Count and the Prevalence of Oral Side Effects

    PubMed Central

    Sadat Sajadi, Fatemeh; Moradi, Mohammad; Pardakhty, Abbas; Yazdizadeh, Razieh; Madani, Faezeh

    2015-01-01

    Background and aims. Streptococcus mutans is the main pathogenic agent involved in dental caries, and may be eliminated using mouthwashes. The objective of this study was to compare the effects of fluoride, chlorhexidine, and fluoride-chlorhexidine mouthwashes on salivary S. mutans count after two weeks of use and determine the prevalence of their side effects on the oral mucosa. Materials and methods. In this clinical trial, 120 12-14 year-old students were selected and divided into three groups. Each group was given one of fluoride, chlorhexidine, or fluoride-chlorhexidine mouthwashes. They were asked to use it twice a day for two weeks. Salivary samples were collected at baseline and after two weeks. Data were analyzed by Wilcoxon and Kruskal-Wallis tests. Results. In all the study groups, there were statistically significant reductions in salivary S. mutans counts two weeks after using the mouthwashes (P < 0.05). In addition, fluoride-chlorhexidine mouthwash had a significant effect on the reduction of S. mutans count in comparison with fluoride alone. The prevalence of oral side effects in fluoride-chlorhexidine mouth-wash was more than 90%. Conclusion. Adding fluoride to chlorhexidine mouthwash can significantly decrease salivary S. mutans count after two weeks. Fluoride-chlorhexidine has the highest rate of oral side effects between the evaluated mouthwash compounds. PMID:25973155

  5. ADEQUACY OF SAMPLING TRAINS AND ANALYTICAL PROCEDURES USED FOR FLUORIDE

    EPA Science Inventory

    Liquid nitrogen-cooled cold-traps were used to establish the collection efficiency for fluorides of two different source sampling trains at primary aluminum reduction plants and wet-process phosphoric acid plants. It was found that the glass frit filter support commonly used in s...

  6. Reversible Intercalation of Fluoride-Anion Receptor Complexes in Graphite

    NASA Technical Reports Server (NTRS)

    West, William C.; Whitacre, Jay F.; Leifer, Nicole; Greenbaum, Steve; Smart, Marshall; Bugga, Ratnakumar; Blanco, Mario; Narayanan, S. R.

    2007-01-01

    We have demonstrated a route to reversibly intercalate fluoride-anion receptor complexes in graphite via a nonaqueous electrochemical process. This approach may find application for a rechargeable lithium-fluoride dual-ion intercalating battery with high specific energy. The cell chemistry presented here uses graphite cathodes with LiF dissolved in a nonaqueous solvent through the aid of anion receptors. Cells have been demonstrated with reversible cathode specific capacity of approximately 80 mAh/g at discharge plateaus of upward of 4.8 V, with graphite staging of the intercalant observed via in situ synchrotron X-ray diffraction during charging. Electrochemical impedance spectroscopy and B-11 nuclear magnetic resonance studies suggest that cointercalation of the anion receptor with the fluoride occurs during charging, which likely limits the cathode specific capacity. The anion receptor type dictates the extent of graphite fluorination, and must be further optimized to realize high theoretical fluorination levels. To find these optimal anion receptors, we have designed an ab initio calculations-based scheme aimed at identifying receptors with favorable fluoride binding and release properties.

  7. The next Stages in Researching Water Fluoridation: Evaluation and Surveillance

    ERIC Educational Resources Information Center

    Downer, Martin C.; Blinkhorn, Anthony S.

    2007-01-01

    Objective: (1) to provide a commentary on a conference held at the University of Manchester entitled Researching Water Fluoridation: Evaluation and Surveillance; (2) to synthesize from the proceedings of the meeting suggestions for future research and public health surveillance. Method: The main points and problematic issues raised by the speakers…

  8. Effects of sodium fluoride on immune response in murine macrophages.

    PubMed

    De la Fuente, Beatriz; Vázquez, Marta; Rocha, René Antonio; Devesa, Vicenta; Vélez, Dinoraz

    2016-08-01

    Excessive fluoride intake may be harmful for health, producing dental and skeletal fluorosis, and effects upon neurobehavioral development. Studies in animals have revealed effects upon the gastrointestinal, renal and reproductive systems. Some of the disorders may be a consequence of immune system alterations. In this study, an in vitro evaluation is made of fluoride immunotoxicity using the RAW 264.7 murine macrophage line over a broad range of concentrations (2.5-75mg/L). The results show that the highest fluoride concentrations used (50-75mg/L) reduce the macrophage population in part as a consequence of the generation of reactive oxygen and/or nitrogen species and consequent redox imbalance, which in turn is accompanied by lipid peroxidation. A decrease in the expression of the antiinflammatory cytokine Il10 is observed from the lowest concentrations (5mg/L). High concentrations (50mg/L) in turn produce a significant increase in the proinflammatory cytokines Il6 and Mip2 from 4h of exposure. In addition, cell phagocytic capacity is seen to decrease at concentrations of ≥20mg/L. These data indicate that fluoride, at high concentrations, may affect macrophages and thus immune system function - particularly with regard to the inflammation autoregulatory processes, in which macrophages play a key role. PMID:26965474

  9. Protactinium Fluorides, the New Class, MPaF6.

    PubMed

    Asprey, L B; Penneman, R A

    1964-08-28

    Complex fluorides of protactinium having a Pa/M ratio of one (where M = K, Rb, or NH(4)) have been prepared from concentrated solutions of HF. These MPaF(6) compounds are isostructural with the corresponding compounds of pentavalent uranium but not with the tantalum analogs. The size of protactinium (V) is but slightly larger than that of uranium (V). PMID:17791825

  10. CAN FLUORIDATION AFFECT WATER LEAD LEVELS AND LEAD NEUROTOXICITY?

    EPA Science Inventory

    Recent reports have attempted to show that certain approaches to fluoridating potable water is linked to increased levels of lead(II) in the blood. We examine these claims in light of the established science and critically evaluate their significance. The completeness of nexafluo...

  11. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...(vinyl fluoride) basic resins have an intrinsic viscosity of not less than 0.75 deciliter per gram as determined by ASTM method D1243-79, “Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride... (ASTM method D1243-79, “Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride...

  12. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of aluminum... lb/ton) of aluminum produced for potroom groups at prebake plants; except that emissions between...

  13. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of aluminum... lb/ton) of aluminum produced for potroom groups at prebake plants; except that emissions between...

  14. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of aluminum... lb/ton) of aluminum produced for potroom groups at prebake plants; except that emissions between...

  15. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Primary Aluminum Reduction... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of aluminum... lb/ton) of aluminum produced for potroom groups at prebake plants; except that emissions between...

  16. Gum containing calcium fluoride reinforces enamel subsurface lesions in situ.

    PubMed

    Kitasako, Y; Sadr, A; Hamba, H; Ikeda, M; Tagami, J

    2012-04-01

    The aim of this study was to assess the effect of chewing gum containing phosphoryl oligosaccharides of calcium (POs-Ca) and a low concentration of fluoride (F) on the hardness of enamel subsurface lesions, utilizing a double-blind, randomized, and controlled in situ model. Fifteen individuals wore removable lingual appliances with 3 bovine-enamel insets containing subsurface demineralized lesions. Three times a day for 14 days, they chewed one of the 3 chewing gums (placebo, POs-Ca, POs-Ca+F). After the treatment period, cross-sectional mineral content, nanoindentation hardness, and fluoride ion mapping by time-of-flight secondary ion mass spectrometry (TOF-SIMS) were evaluated. Although there were no statistical differences in overall mineral content and hardness recovery rates between POs-Ca and POs-Ca+F subsurface lesions (p > 0.05), nanoindentation at 1-μm distance increments from the surface showed statistical differences in hardness recovery rate between POs-Ca and POs-Ca+F in the superficial 20-μm region (p < 0.05). Fluoride mapping revealed distribution of the ion up to 20 μm from the surface in the POs-Ca+F group. Nanoindentation and TOF-SIMS results highlighted the benefits of bioavailability of fluoride ion on reinforcement of the superficial zone of subsurface lesions in situ (NCT01377493). PMID:22337700

  17. A multigrain protein enriched diet mitigates fluoride toxicity.

    PubMed

    Vasant, Rupal A; Amaravadi V R L, Narasimhacharya

    2013-06-01

    Fluorosis is a major health problem in many parts of the world. The present work focuses on investigating the utility of nutrient and antioxidant rich grains- ragi, jowar, bajra, maize in formulation of basal, high carbohydrate low protein and low carbohydrate high protein diets in mitigating fluoride toxicity. Exposure to fluoride through drinking water not only significantly increased plasma glucose and lipid profiles, but also elevated both hepatic and renal lipid peroxidation, hepatic lipid profiles and G-6-Pase activity with a reduction in plasma HDL-C, hepatic glycogen content, hexokinase activity and antioxidant status. Even though basal and high carbohydrate diets did not significantly alter plasma glucose, lipid profiles in fluoride administered animals, protein enriched multigrain diet significantly decreased plasma glucose and lipid levels. However, the multigrain basal and high carbohydrate diets influenced the hepatic glycogen, lipid profiles, hexokinase and G-6-Pase activities, hepatic and renal lipid peroxidation and antioxidant status though not as significantly as that of multigrain diet enriched with protein. Thus the results of the present study indicate that both a multigrain diet rich in nutrients and antioxidants, and fortified with protein is useful in mitigating the fluoride toxicity. PMID:24425948

  18. Sol-gel-fluorination synthesis of amorphous magnesium fluoride

    SciTech Connect

    Krishna Murthy, J.; Gross, Udo; Ruediger, Stephan; Kemnitz, Erhard . E-mail: erhard.kemnitz@chemie.hu-berlin.de; Winfield, John M.

    2006-03-15

    The sol-gel fluorination process is discussed for the reaction of magnesium alkoxides with HF in non-aqueous solvents to give X-ray amorphous nano-sized magnesium fluoride with high surface areas in the range of 150-350 m{sup 2}/g (HS-MgF{sub 2}). The H2 type hysteresis of nitrogen adsorption-desorption BET-isotherms is indicative for mesoporous solids. A highly distorted structure causes quite high Lewis acidity, shown by NH{sub 3} temperature-programmed desorption (NH{sub 3}-TPD) and catalytic test reactions. XPS data of amorphous and conventionally crystalline MgF{sub 2} are compared, both show octahedral coordination at the metal site. Thermal analysis, F-MAS NMR- and IR-spectroscopy give information on composition and structure of the precursor intermediate as well as of the final metal fluoride. The preparation of complex fluorides, M{sup +}MgF{sub 3} {sup -}, by the sol-gel route is reported. From the magnesium fluoride gel of the above process thin films for optical application are obtained by, e.g., spin coating.

  19. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for fluorides. 60.202 Section 60.202 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  20. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for fluorides. 60.222 Section 60.222 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  1. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for fluorides. 60.212 Section 60.212 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  2. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.202 Section 60.202 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  3. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for fluorides. 60.232 Section 60.232 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  4. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.222 Section 60.222 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  5. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for fluorides. 60.232 Section 60.232 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  6. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for fluorides. 60.242 Section 60.242 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  7. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for fluorides. 60.242 Section 60.242 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  8. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for fluorides. 60.222 Section 60.222 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  9. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standard for fluorides. 60.202 Section 60.202 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  10. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.232 Section 60.232 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  11. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standard for fluorides. 60.212 Section 60.212 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  12. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.212 Section 60.212 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate...

  13. REMOVAL OF FLUORIDES FROM INDUSTRIAL WASTEWATERS USING ACTIVATED ALUMINA

    EPA Science Inventory

    A four-step, bench-scale process has been developed that is capable of removing at least 92 percent of the soluble fluoride from feldspar flotation process wastewaters at a projected cost of $1.03/kkg ($0.93/ton) of feldspar. For a 163,000 kkg/year (180,000 ton/year) plant, the i...

  14. Effects of light exposure on irradiated barium fluoride crystals

    SciTech Connect

    Wuest, C.R.; Mauger, G.J.

    1993-04-20

    Small barium fluoride crystals have been irradiated using cobalt-60 gamma rays under various illumination conditions to establish the effect of photo-bleaching of the radiation-induced color centers. This paper describes results of a few different experiments conducted at LLNL over the past few weeks.

  15. Electrochemical generation of aluminum sorbent for fluoride adsorption.

    PubMed

    Yang, Chen-Yu; Dluhy, Robert

    2002-10-14

    Aluminum sorbent (Al-sorbent) was produced in a parallel-plate electrochemical reactor by anodic dissolution of aluminum electrodes in a dilute sodium chloride (NaCl) aqueous solution. The NaCl in the solution effectively reduced the power consumption and promoted the sorbent generation by depasivating the aluminum-water electrochemical system. The freshly generated Al-sorbent was able to reduce fluoride concentration from 16 to 2 mg/l in 2 min. The final concentration was further reduced to 0.1 mg/l by partial neutralization of the mixture to pH 6.3. The sorbent generation and fluoride adsorption was integrated into a single electrochemical reactor. The system was able to reduce the fluoride concentration from 16 to 6 mg/l in 2 min of treatment and to about 2 mg/l in 4 min. The effluent from the electrochemical system needs pH adjustment to bring the fluoride concentration down to less than 1 mg/l. PMID:12220827

  16. Oxidative stress parameters in rats exposed to fluoride and caffeine.

    PubMed

    Inkielewicz-Stepniak, I; Czarnowski, W

    2010-06-01

    In our experiment, the 1-month effects of caffeine (Caff) and fluoride (F) administered separately and together on nitric oxide and total antioxidant status in serum, brain, liver and kidney of rats were investigated. Also, the influence of caffeine on fluoride excretion with urine was studied. Thirty adult male Wistar rats were divided into five equal groups of six each: (I) controls drinking tap water; (II) controls drinking tap water and receiving intragastrically 0.5 ml of tap water; (III) animals receiving 25 mg F/L in drinking water; (IV) animals receiving 4.7 mg Caff/kg bw/day; (V) animals receiving 25 mg F/L in drinking water and 4.7 mg Caff/kg bw/day. The applied fluoride caused increase of nitric oxide level (NO), intensified lipid peroxidation (TBARS) and decreased total antioxidant status in serum (TAS), brain, kidney and liver. Caffeine administered intragastrically, as an antioxidant, was relatively efficient in alleviating these adverse effects of F. In rats treated only with fluoride the F excretion in urine significantly increased in an exposure-time dependent-manner and did not change both in rats treated with Caff and co-exposed to Caff and F. PMID:20347920

  17. Baltimore and the Beginnings of the Fluoride Controversy.

    PubMed

    Daws, Steven

    2015-01-01

    The fluoridation of municipal water as a preventive dental health measure has proven to be a contentious issue from its very outset. In 1952, Baltimore became the first major city in the United States to artificially add fluoride to its water supply. This study draws largely on print media sources as a means of discerning public sentiment, in order to evaluate the nature of Baltimore's fluoride controversy in its infancy. Initial response was influenced by prior exposure to the substance within the context of dentistry, as well as a continued trend of conservatism within the community. Logistical issues during implementation due to the necessary upscale of established practices to accommodate Baltimore's population served to further exacerbate concerns. Much of the opposition was predicated on the breadth of the measure, as evidenced by the myriad of personal concerns put forth in objection. Personal concerns developed into demands for personal autonomy, providing a philosophical foundation for the anti-fluoridation movement that persists today. PMID:26930845

  18. Efficacy of xylitol and fluoride mouthrinses on salivary mutans streptococci

    PubMed Central

    Arunakul, Malee; Thaweboon, Boonyanit; Thaweboon, Sroisiri; Asvanund, Yuwadee; Charoenchaikorn, Kesinee

    2011-01-01

    Objective To evaluate the level of salivary Mutans streptococci (MS) after rinsing with xylitol, fluoride, and a combination of xylitol and fluoride solutions, compared with distilled water. Methods Eighty healthy 8-9 years old subjects with high level of MS (> 105 CFU/mL) were equally divided into 4 groups. Subjects rinsed their mouths for 1 min with 10 mL of 0.05% (w/v) sodium fluoride (NaF), 12.5% (w/v) xylitol or 0.05% (w/v) NaF + 12.5% (w/v) xylitol 3 times daily over 10 weeks. Distilled water rinsed group served as a control. Paraffin-stimulated whole saliva samples were collected at baseline, 5 weeks, and 10 weeks after rinsing to determine the level of salivary MS by culturing on Mitis Salivarius Bacitracin agar. The statistical significance was calculated by Kruskal Wallis, Mann Whitney U, and Wilcoxon signed-rank tests at a significant level of P< 0.05. Results Significant reductions in MS count were observed in subjects using 0.05% NaF + 12.5% xylitol over other groups within 5 weeks and after 10 weeks and 12.5% xylitol alone after 10 weeks compared with baseline. Conclusions The present study provides evidence for the inhibitory effect of xylitol, used in combination with fluoride, delivered in the form of mouthrinse, on salivary MS in the group of schoolchildren. PMID:23569819

  19. Removal of fluoride contamination in water by three aquatic plants.

    PubMed

    Karmakar, Sukalpa; Mukherjee, Joydeep; Mukherjee, Somnath

    2016-01-01

    Phytoremediation, popularly known as 'green technology' has been employed in the present investigation to examine the potential of fluoride removal from water by some aquatic plants. Fluoride contamination in drinking water is very much prevalent in different parts of the world including India. Batch studies were conducted using some aquatic plants e.g., Pistia stratiotes, Eichhornia crassipes, and Spirodela polyrhiza which profusely grow in natural water bodies. The experimental data exhibited that all the above three aquatic floating macrophytes could remove fluoride to some relative degree of efficiency corresponding to initial concentration of fluoride 3, 5, 10, 20 mg/l after 10 days exposure time. Result showed that at lower concentration level i.e., 3 mg/L removal efficiency of Pistia stratiotes (19.87%) and Spirodela polyrhiza (19.23%) was found to be better as compared to Eichhornia crassipes (12.71%). Some of the physiological stress induced parameters such as chlorophyll a, chlorophyll b, total chlorophyll, carotenoid, total protein, catalase, and peroxidase were also studied to explore relative damage within the cell. A marginal stress was imparted among all the plants for lower concentration values (3 mg/L), whereas at 20 mg/l, maximum damage was observed. PMID:26247406

  20. Antibacterial coatings of fluoridated hydroxyapatite for percutaneous implants.

    PubMed

    Ge, Xiang; Leng, Yang; Bao, Chongyun; Xu, Sherry Li; Wang, Renke; Ren, Fuzeng

    2010-11-01

    Percutaneous orthopedic and dental implants require not only good adhesion with bone but also the ability to attach and form seals with connective tissues and the skin. To solve the skin-seal problem of such implants, an electrochemical deposition method was used to modify the surfaces of metallic implants to improve their antibacterial ability and skin seals around them. A dense and uniform fluoridated calcium phosphate coating with a thickness of about 200 nm was deposited on an acid-etched pure titanium substrate by controlling the current density and reaction duration of the electrochemical process. The as-deposited amorphous fluoridated calcium phosphate transformed to fluoridated hydroxyapatite (FHA) after heat treatment at 600°C in a water vapor environment for 3 h. Both single crystal diffraction patterns and high-resolution transmission electron microscope (HRTEM) images confirmed the phase of the fluoridated calcium phosphate after the heat treatment. The antibacterial activities of FHA coatings were tested against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Porphyromonas gingivalis (P. gingivalis) with the film attachment method. The antibacterial activity of FHA coating is much higher than that of pure hydroxyapatite (HA) coating and acid-etched pure titanium surface. The promising features of FHA coating make it suitable for orthopedic and dental applications. PMID:20725973

  1. Factors affecting the bioaccessibility of fluoride from seafood products.

    PubMed

    Rocha, R A; de la Fuente, B; Clemente, M J; Ruiz, A; Vélez, D; Devesa, V

    2013-09-01

    Fluoride is considered important for health because of its beneficial effect on the prevention of dental caries and on bone development in the child population. However, excessive intake has negative effects. The main pathway for exposure is oral, through consumption of drinking water, and some food products. Therefore its bioaccessibility (quantity of the element solubilized during the digestive process) is a parameter to be considered when estimating the risk/benefit associated with this element. The aim of the present study was to evaluate the influence of the digestion phase, gastrointestinal digestion factors (pH, pepsin and bile salt concentrations) and the presence of cations on the bioaccessibility of fluoride from seafood products. The results show that the solubilization of fluoride takes place entirely during the gastric phase. Its bioaccessibility is strongly influenced by conditions that favor the formation of insoluble complexes of fluoride with other elements present in the matrix. The factors that are most influential in reducing its bioaccessibility are the increase in pH in the gastric phase, the presence of cations, especially in the intestinal phase, and a low concentration of bile salts. PMID:23747712

  2. Fluoride release and antibacterial activity of selected dental materials.

    PubMed

    Marczuk-Kolada, Grazyna; Jakoniuk, Piotr; Mystkowska, Joanna; Łuczaj-Cepowicz, Elzbieta; Waszkiel, Danuta; Dabrowski, Jan Ryszard; Leszczyńska, Katarzyna

    2006-01-01

    The aim of the study was to assess the fluoride ion release and antibacterial activities of the glassionomer cement Fuji IX and the compomer (composite modified polyacid) Dyract AP. Fluoride ion release was measured using direct potentiometry with an Orion fluoride ion selective electrode. The measurement was carried out after 1, 4, 7, 14, 30, and 60 days of storage in phosphate buffer at pH 6.8. The antibacterial activity of the materials was evaluated against the bacteria Streptococcus mutans ATCC 35668, Streptococcus salivarius ATCC 13419, Streptococcus sanguis ATCC 10556, and Lactobacillus casei subsp. casei ATCC 393. The agar diffusion test was applied. The material specimens were assessed twice: after setting and seven days later. Zones of bacterial growth inhibition were measured in millimeters after 24 hours. The results of the study showed that both materials released ion fluoride, with a higher emission of Fuji IX than Dyract AP. The highest level of emission was observed on the seventh day of the study in both materials. After 24 hours of bonding there was inhibition of bacterial growth by Fuji IX, whereas Dyract AP did not show similar activity. On the eighth day after polymerization, Dyract AP was significantly more active towards Streptococcus sanguis and salivarius. PMID:18493226

  3. Fluoride Varnish for Caries Prevention: Efficacy and Implementation.

    PubMed

    Bonetti, Debbie; Clarkson, Jan E

    2016-01-01

    Many reviews support fluoride varnish (FV) as a caries-inhibitory agent. Evidence from 6 Cochrane systematic reviews involving 200 trials and more than 80,000 participants further confirms the effectiveness of FV, applied professionally 2-4 times a year, for preventing dental caries in both primary and permanent teeth. The relative benefit of FV application seems to occur irrespective of baseline caries risk, baseline caries severity, background exposure to fluorides, use of fluoride toothpaste and application features such as prior prophylaxis, concentration of fluoride or frequency of application. While the efficacy of FV is acknowledged in clinical practice guidelines globally, the implementation of this recommendation may still be an issue. Factors that may facilitate FV application in the USA include Medicaid eligibility, relationships with dentists/community centers and strong cooperation and communication between physicians and support staff. Barriers include insufficient time to integrate oral health services into well-child visits, difficulty in applying FV (lack of skills/training) and resistance among colleagues and staff. Research in the UK/Scotland also suggests encouraging clinicians in their motivation to perform this treatment and addressing professional and parental concerns relating to possible negative consequences may be influential. Further research targeting cost-effectiveness and how FV in routine care may fit in with political agendas relating to, for example, inequalities in health care provision and access will also play a key part in stakeholder decisions to put resources into this issue. PMID:27100219

  4. Fluoride penetration from three orthodontic adhesives: an experimental study

    PubMed Central

    Szepietowska, Magdalena

    2013-01-01

    Objective To examine the prophylactic potential of 3 orthodontic bonding adhesives: Fuji Ortho SC, Illuminate, and Resilience. Methods Thirty-six Wistar Wag rats were randomly divided into 4 groups consisting of 9 rats each. One of the groups received no treatment and was used as a control. In the other groups, individual bands coated with one of the 3 adhesives were cemented to the lower incisors. Enamel samples were obtained after 6 and 12 weeks and analyzed using scanning electron microscopy in combination with energy dispersive spectrometry. Results Six weeks after band cementation, no fluoride was found in the enamel of the lower incisors. After 12 weeks, there was no fluoride in the enamel of teeth coated with the Resilience composite. However, in the case of the Illuminate composite and the resin-modified glass ionomer Fuji Ortho SC cement, the depth of fluoride penetration reached 2 µm and 4.8 - 5.7 µm, respectively. Conclusions Fluoride ions from orthodontic adhesives can be incorporated into the surface layer of the enamel. Orthodontists may apply orthodontic adhesives, such as the Fuji Ortho SC, to reduce the occurrence of caries during orthodontic treatment with fixed appliances. PMID:23502591

  5. Guanine and inosine nucleotides, nucleosides and oxypurines in snail muscles as potential biomarkers of fluoride toxicity.

    PubMed

    Rać, Monika E; Safranow, Krzysztof; Dołegowska, Barbara; Machoy, Zygmunt

    2007-01-01

    The aim of the present study was to determine the toxicity of fluorides on energy metabolism in muscles of the Helix aspersa maxima snail. Qualitative and quantitative analysis of purine compounds was performed in slices of foot from mature snails with high-performance liquid chromatography. Fluoride concentrations were measured using an ion-selective electrode and gas chromatography. The results show that exposure to fluoride pollution was accompanied by a statistically significant increase in fluoride concentrations in soft tissues. This effect was already noticeable with the smallest fluoride dose. Accumulation was greatest in the shell. There is a significant and positive correlation between fluoride concentrations in foot muscles and guanine and inosine nucleotides or uridine content. The content of low-energy guanylate, inosylate and oxypurine in foot muscles significantly increased with rising dose of fluoride. The difference as compared with controls was significant only for the highest dose of fluoride. Interestingly, uric acid, the final product of purine catabolism, dominated quantitatively in the foot muscles of snails. In conclusion, increased low-energy guanylate and inosylate as well as decreased xanthine concentrations in snail muscle can be indicators of the toxic influence of fluoride on the organism. The measuring of fluoride accumulation in the shell is the most suitable bioindicator of fluoride pollution in the environment. PMID:18274260

  6. Prevention of enamel demineralization with a novel fluoride strip: enamel surface composition and depth profile

    PubMed Central

    Lee, Bor-Shiunn; Chou, Po-Hung; Chen, Shu-Yu; Liao, Hua-Yang; Chang, Che-Chen

    2015-01-01

    There is no topically applicable low concentration fluoride delivery device available for caries prevention. This study was aimed to assess the use of a low concentration (1450 ppm) fluoride strip as an effective fluoride delivery system against enamel demineralization. The enamel surface composition and calcium-deficient hydroxyapatite or toothpaste treatments were investigated using X-ray photoelectron spectroscopy. In vitro enamel demineralization was assayed using a pH cycling model and the dissolution of calcium ions from the treated specimens was quantified using ion chromatography. After 24-hr fluoride-strip treatment, the enamel was covered with a CaF2 layer which showed a granular morphology of 1 μm in size. Below the CaF2 layer was a region of mixed fluorapatite and CaF2. Fluoride infiltrated extensively in enamel to produce highly fluorinated fluorohydroxyapatite. In comparison, low-fluoride-level fluorinated fluorohydroxyapatite was formed on the enamel specimen exposed to toothpaste. The treatments with the fluoride strip as short as 1 hr significantly inhibited enamel demineralization. The fluoride strip was effective for topical fluoride delivery and inhibited in vitro demineralization of enamel by forming CaF2 and fluoride-containing apatites at the enamel surface. It exhibited the potential as an effective fluoride delivery device for general use in prevention of caries. PMID:26293361

  7. Effect of fluoride on glucose incorporation and metabolism in biofilm cells of Streptococcus mutans.

    PubMed

    Balzar Ekenbäck, S; Linder, L E; Sund, M L; Lönnies, H

    2001-06-01

    The aim of this study was two-fold: firstly, to study the effect of high fluoride concentrations on carbohydrate metabolism in Streptococcus mutans present in biofilms on hydroxyapatite; and, secondly, to evaluate the effect of fluoride-bound hydroxyapatite on lactic acid formation in growing biofilms of Strep. mutans. Biofilms of a clinical strain of Strep. mutans on saliva-coated hydroxyapatite beads were incubated with sodium fluoride over a wide range of concentrations. At high fluoride concentrations (>10 mM) the incorporation of [14C]-labeled glucose decreased by 80-85%, at both pH 7.0 and 5.6. At lower fluoride concentrations, the effect of fluoride on the incorporation of labeled glucose was pH-dependent in both biofilm cells and in planktonic cells. At pH 7.0, fluoride at concentrations < 10 mM had little or no effect. Pretreatment of hydroxyapatite discs with fluoride varnish (Fluor Protector) or fluoride solutions caused a statistically significant reduction of lactic acid formation in associated, growing biofilms of Strep. mutans. Fluoride varnish and 0.2% (47.6 mM) sodium fluoride solution exhibited a statistically significant inhibitory effect on lactate production. PMID:11456349

  8. The effect of different fluoride application methods on the remineralization of initial carious lesions

    PubMed Central

    2016-01-01

    Objectives The purpose of this study was to assess the effect of single and combined applications of fluoride on the amount of fluoride release, and the remineralization and physical properties of enamel. Materials and Methods Each of four fluoride varnish and gel products (Fluor Protector, FP, Ivoclar Vivadent; Tooth Mousse Plus, TM, GC; 60 Second Gel, A, Germiphene; CavityShield, CS, 3M ESPE) and two fluoride solutions (2% sodium fluoride, N; 8% tin(ii) fluoride, S) were applied on bovine teeth using single and combined methods (10 per group), and then the amount of fluoride release was measured for 4 wk. The electron probe microanalysis and the Vickers microhardness measurements were conducted to assess the effect of fluoride application on the surface properties of bovine teeth. Results The amount of fluoride release was higher in combined applications than in single application (p < 0.05). Microhardness values were higher after combined applications of N with FP, TM, and CS than single application of them, and these values were also higher after combined applications of S than single application of A (p < 0.05). Ca and P values were higher in combined applications of N with TM and CS than single application of them (p < 0.05). They were also increased after combined applications of the S with A than after single application (p < 0.05). Conclusions Combined applications of fluoride could be used as a basis to design more effective methods of fluoride application to provide enhanced remineralization. PMID:27200280

  9. Fluoride stimulates ( sup 3 H)thymidine incorporation and alkaline phosphatase production by human osteoblasts

    SciTech Connect

    Khokher, M.A.; Dandona, P. )

    1990-11-01

    The effect of sodium fluoride on alkaline phosphatase (ALP) release and ({sup 3}H)thymidine uptake by human osteoblasts in culture was investigated. Sodium fluoride stimulated both ALP release and ({sup 3}H)thymidine uptake at concentrations of sodium fluoride greater than 250 mumol/L. This stimulation was similar in magnitude to that induced by 1,25-dihydroxycholecalciferol. The fluoride-induced increase in ALP was inhibited by verapamil, a calcium channel blocker. We conclude that sodium fluoride stimulates osteoblasts to proliferate and to release ALP. This stimulation by fluoride is dependent on calcium influx. Fluoride-induced stimulation of human osteoblasts may be relevant to its effect in enhancing bone formation in patients with osteoporosis.

  10. [Differential approach to spring water choice regarding fluoride content for caries prevention].

    PubMed

    Makeeva, I M; Protsenko, A S; Svistunova, E G

    2013-01-01

    The research includes an investigation of the tap water in different districts of Moscow. It was found out that Moscow tap water contains little fluoride, the difference between districts and okrugs is of no consequence. There is no centralized water fluoridization in Moscow therefore the authors suggest using bottled potable water with sufficient fluoride level. The fluoride concentration in one hundred of the most popular and wide-spread bottled potable water labels was examined. High in fluoride and low in fluoride labels were identified as well as the labels with the optimal fluoride content. Some practical guidelines for selection of bottled potable water depending on the quantity of liquid consummation were elaborated. PMID:23994849

  11. Dentifrice fluoride and abrasivity interplay on artificial caries lesions.

    PubMed

    Nassar, Hani M; Lippert, Frank; Eckert, George J; Hara, Anderson T

    2014-01-01

    Incipient caries lesions on smooth surfaces may be subjected to toothbrushing, potentially leading to remineralization and/or abrasive wear. The interplay of dentifrice abrasivity and fluoride on this process is largely unknown and was investigated on three artificially created lesions with different mineral content/distribution. 120 bovine enamel specimens were randomly allocated to 12 groups (n = 10), resulting from the association of (1) lesion type [methylcellulose acid gel (MeC); carboxymethylcellulose solution (CMC); hydroxyethylcellulose gel (HEC)], (2) slurry abrasive level [low (REA 4/ RDA 69); high (REA 7/RDA 208)], and (3) fluoride concentration [0/275 ppm (14.5 mM) F as NaF]. After lesion creation, specimens were brushed in an automated brushing machine with the test slurries (50 strokes 2×/day). Specimens were kept in artificial saliva in between brushings and overnight. Enamel surface loss (SL) was determined by optical profilometry after lesion creation, 1, 3 and 5 days. Two enamel sections (from baseline and post-brushing areas) were obtained and analyzed microradiographically. Data were analyzed by analysis of variance and Tukey's tests (α = 5%). Brushing with high-abrasive slurry caused more SL than brushing with low-abrasive slurry. For MeC and CMC lesions, fluoride had a protective effect on SL from day 3 on. Furthermore, for MeC and CMC, there was a significant mineral gain in the remaining lesions except when brushed with high-abrasive slurries and 0 ppm F. For HEC, a significant mineral gain took place when low-abrasive slurry was used with fluoride. The tested lesions responded differently to the toothbrushing procedures. Both slurry fluoride content and abrasivity directly impacted SL and mineral gain of enamel caries lesions. PMID:24993884

  12. Structural studies of magnesium nitride fluorides by powder neutron diffraction

    SciTech Connect

    Brogan, Michael A.; Hughes, Robert W.; Smith, Ronald I.; Gregory, Duncan H.

    2012-01-15

    Samples of ternary nitride fluorides, Mg{sub 3}NF{sub 3} and Mg{sub 2}NF have been prepared by solid state reaction of Mg{sub 3}N{sub 2} and MgF{sub 2} at 1323-1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg{sub 3}NF{sub 3} is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg{sub 2}NF is tetragonal (space group: I4{sub 1}/amd) and has an anti-LiFeO{sub 2} related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K. - Graphical abstract: Definitive structures of the ternary magnesium nitride fluorides Mg{sub 3}NF{sub 3} and the lower temperature polymorph of Mg{sub 2}NF have been determined from powder neutron diffraction data. The nitride halides are essentially ionic and exhibit weak temperature independent paramagnetic behaviour. Highlights: Black-Right-Pointing-Pointer Definitive structures of Mg{sub 3}NF{sub 3} and Mg{sub 2}NF were determined by neutron diffraction. Black-Right-Pointing-Pointer Nitride and fluoride anions are crystallographically ordered in both structures. Black-Right-Pointing-Pointer Both compounds exhibit weak, temperature independent paramagnetic behaviour. Black-Right-Pointing-Pointer The compounds are essentially ionic with ionicity increasing with F{sup -} content.

  13. Fluoride concentrations in dental plaque and saliva after the use of a fluoride dentifrice preceded by a calcium lactate rinse.

    PubMed

    Pessan, Juliano P; Sicca, Cristina M; de Souza, Tatiana S; da Silva, Salete M B; Whitford, Gary M; Buzalaf, Marília A R

    2006-12-01

    Plaque fluoride concentrations ([F]) are directly related to plaque calcium concentrations [Ca]. Attempts to increase plaque F uptake from dentifrices or rinses have used methods designed to increase plaque [Ca] but with inconsistent results. This double-blind, double-crossover study tested the effect of a 150 mM calcium lactate rinse used prior to brushing with placebo or fluoridated dentifrices (1030 p.p.m. as NaF) on plaque and salivary [F] and [Ca]. Sixteen children (8-10 yr of age) were randomly assigned to four different groups according to the four treatments (placebo dentifrice or fluoridated dentifrice preceded by calcium lactate or deionized water prerinses). Plaque and saliva were collected 1 and 12 h after brushing on day 7 after starting to use the dentifrices. F was determined using the electrode and Ca was determined using atomic absorption spectrometry. Plaque and salivary [Ca] were not significantly increased after use of the calcium lactate prerinse, except for plaque [Ca] 1 h after the use of the placebo dentifrice. A significant increase in salivary [F] was associated with the calcium lactate prerinse only at 1 h after the use of the fluoridated dentifrice. The the calcium lactate prerinse did not significantly affect plaque [F] under any condition. PMID:17184230

  14. Fluoride concentrations and distribution in premolars of children from low and optimal fluoride areas.

    PubMed

    Takeuchi, K; Nakagaki, H; Toyama, Y; Kimata, N; Ito, F; Robinson, C; Weatherell, J A; St-osser, L; Künzel, W

    1996-01-01

    We have compared the fluoride (F) concentrations from the enamel surface to the dentino-enamel junction (DEJ), and through dentine to the dentino-pulpal junction (DPJ) in premolars extracted from school children in Chemnitz (former Karl-Marx-Stadt), Germany (F: 1.0 ppm in the water supply), Erfurt, Germany (F: 0.2 ppm in the water supply) and Nagoya, Japan (F: 0.1 ppm in the water supply). In teeth from children in Cheminitz, Erfurt and Nagoya, the profiles of F distribution using an abrasive microsampling technique revealed high F concentrations in the enamel surface, with a substantial decrease towards a plateau in the interior. In dentine the F concentrations were higher than in enamel, and also decreased to a plateau from the DEJ, thereafter increasing considerably towards the DPJ. F concentrations at any depth in the enamel and dentine of teeth from Chemnitz were 2-3 times higher than those in Erfurt and Nagoya. There was no significant difference in F concentrations or distributions between Erfurt and Nagoya. Close to the DEJ in both enamel and dentine as well as the enamel surface and the DPJ side of dentine, higher F concentrations were observed in Chemnitz compared with Erfurt and Nagoya. PMID:8850587

  15. Performance of novel hydroxyapatite nanowires in treatment of fluoride contaminated water.

    PubMed

    He, Junyong; Zhang, Kaisheng; Wu, Shibiao; Cai, Xingguo; Chen, Kai; Li, Yulian; Sun, Bai; Jia, Yong; Meng, Fanli; Jin, Zhen; Kong, Lingtao; Liu, Jinhuai

    2016-02-13

    Novel ultralong hydroxyapatite (HAP) nanowires were successfully prepared for fluoride removal for the first time. The fluoride adsorption on the HAP nanowires was studied on a batch mode. The results revealed that the adsorption data could be well described by the Freundlich model, and the adsorption kinetic followed the pseudo-second-order model. The maximum of adsorption capacity was 40.65 mg/g at pH 7.0 when the fluoride concentration is 200mg/L. The thermodynamic parameters suggested that the adsorption of fluoride was a spontaneous endothermic process. The FT-IR, XPS and Zeta potential analysis revealed that both anion exchange and electrostatic interactions were involved in the adsorption of fluoride. Furthermore, the HAP nanowires were made into HAP membrane through a simple process of suction filtration. Membrane filtration experiments revealed that the fluoride removal capabilities depended on the membrane thickness, flow rate and initial concentration of fluoride. The as-prepared membrane could remove fluoride efficiently through continues filtration. The filtered water amount could reach 350, 192, and 64 L/m(2) when the fluoride concentrations were 4, 5 and 8 ppm, respectively, using the HAP membrane with only 150 μm thickness. The as-synthesized ultralong HAP nanowires were thus demonstrated to be very effective and biocompatible adsorbents for fluoride removal from contaminated water. PMID:26530888

  16. Assessment of fluoride concentrations in commercially available mouthrinses in central Saudi Arabia

    PubMed Central

    Aldrees, Abdullah M.; AlBeshri, Sultan S.; AlSanie, Ibrahim S.; Alsarra, Ibrahim A.

    2014-01-01

    ABSTRACT Objectives: To assess the fluoride concentration of different commercially available mouthrinses in central Saudi Arabia, and compare the obtained measurements with label values. Methods: This cross-sectional study identified 25 brands of mouthrinses in the markets of Riyadh city between August and September 2013. Nineteen brands of mouthrinses whose labels indicate the percentage of sodium fluoride (NaF) and 6 brands not indicating the fluoride percentage were included in the study. Three bottles of 2 manufacturing batches of each brand were acquired, coded, and analyzed after dilution using specific electrodes for fluoride and an ion analyzer at the College of Science, King Saud University, Riyadh, Saudi Arabia. Results: The average fluoride concentrations in the tested mouthrinses ranged from 8.4 ppm (Voza) to 448.7 ppm (Sensodyne “Pronamel”). Analysis of variance showed a statistically significant difference (p<0.05) in the fluoride concentration between the studied 25 brands. Almost 60% of the brands’ fluoride concentrations were significantly different (mainly lower) from the label value. However, only 5 brands contain fluoride at a concentration not significantly different from the recommended fluoride concentration in daily mouthrinses 0.05% (225 ppm). Conclusion: Most of the studied commercially available mouthrinses contain topical fluoride at concentrations below the manufacturers’ label value, but above the recommended 0.05%. PMID:25316478

  17. Enhancing Fluoride: Clinical Human Studies of Alternatives or Boosters for Caries Management.

    PubMed

    Fontana, Margherita

    2016-01-01

    Dental caries remains a major public health problem, especially for certain high-risk population groups. The goal of this study was to assess the evidence regarding strategies meant to be used as alternatives or booster/supplements to fluoride for caries prevention and management. Articles were selected for inclusion if they had a prospective longitudinal design, with a fluoride control arm, and were conducted in human subjects. Of the included studies, 7/18 studies on calcium-based strategies favored the test product (the majority of studies included exposure of fluoride in all groups). All the arginine studies (8/8) included a combination of arginine and a calcium base, and concluded that this has the potential to significantly boost the performance of fluoride. The remaining included studies focused on the addition of microbial-related strategies to a fluoride-containing vehicle (2 xylitol studies and 1 study using a probiotic milk), and all favored the combination as a booster to fluoride. Thus, the current study did not identify evidence for any strategy to effectively be used as a substitute or alternative to fluoride, but identified some consistent evidence derived from the use of prebiotic strategies (primarily from use of arginine combined with calcium) to support their potential use to boost the mechanism of action of fluoride. Thus, fluoride-based strategies remain the standard for caries prevention and management, with some evidence that boosting the effects of fluoride by the use of prebiotic strategies is a promising possibility. PMID:27100833

  18. Contribution of chloride channel permease to fluoride resistance in Streptococcus mutans.

    PubMed

    Murata, Takatoshi; Hanada, Nobuhiro

    2016-06-01

    Genes encoding fluoride transporters have been identified in bacterial and archaeal species. The genome sequence of the cariogenic Streptococcus mutans bacteria suggests the presence of a putative fluoride transporter, which is referred to as a chloride channel permease. Two homologues of this gene (GenBank locus tags SMU_1290c and SMU_1289c) reside in tandem in the genome of S. mutans The aim of this study was to determine whether the chloride channel permeases contribute to fluoride resistance. We constructed SMU_1290c- and SMU_1289c-knockout S. mutans UA159 strains. We also constructed a double-knockout strain lacking both genes. SMU_1290c or SMU_1289c was transformed into a fluoride transporter- disrupted Escherichia coli strain. All bacterial strains were cultured under appropriate conditions with or without sodium fluoride, and fluoride resistance was evaluated. All three gene-knockout S. mutans strains showed lower resistance to sodium fluoride than did the wild-type strain. No significant changes in resistance to other sodium halides were recognized between the wild-type and double-knockout strains. Both SMU_1290c and SMU_1289c transformation rescued fluoride transporter-disrupted E. coli cell from fluoride toxicity. We conclude that the chloride channel permeases contribute to fluoride resistance in S. mutans. PMID:27190286

  19. Protective effect of ascorbic acid and Ginkgo biloba against learning and memory deficits caused by fluoride.

    PubMed

    Jetti, Raghu; Raghuveer, C V; Mallikarjuna, Rao C

    2016-01-01

    Fluoride is present in the ground water, World Health Organization permitted level of fluoride in the ground water is 0.5 ppm. Tooth pastes, mouth washes, tea and sea fish are the sources of fluoride. Exposure to these multiple sources results in several adverse effects in addition to the fluorosis. The present study aimed to test the effect of vitamin C and Ginkgo biloba against the behavioural deficits caused by fluoride. Rats were divided into five groups with six animals in each group (n = 6). Control group received ordinary tap water with 0.5 ppm of fluoride, the remaining groups received 100 ppm of fluoride for 30 days prior to fluoride exposure. Two groups of animals received 100 mg/kg body weight of vitamin C and G. biloba for 15 days prior to fluoride exposure. After 45 days, behavioural studies (T-Maze, passive avoidance) were conducted on the experimental animals. The results of the present study showed no behavioural deficits in the control group of animals however, the rats that received fluoride water exhibited impairment in their spatial learning and memory deficits. The deficits are not marked in the vitamin C and G. biloba groups. To conclude chronic exposure to high levels of fluoride causes severe impairment in the spatial learning and memory, these deficits can be ameliorated with the vitamin C and G. biloba. PMID:24081631

  20. The Impact of Fluoride on Ameloblasts and the Mechanisms of Enamel Fluorosis

    PubMed Central

    Bronckers, A.L.J.J.; Lyaruu, D.M.; DenBesten, P.K.

    2009-01-01

    Intake of excess amounts of fluoride during tooth development cause enamel fluorosis, a developmental disturbance that makes enamel more porous. In mild fluorosis, there are white opaque striations across the enamel surface, whereas in more severe cases, the porous regions increase in size, with enamel pitting, and secondary discoloration of the enamel surface. The effects of fluoride on enamel formation suggest that fluoride affects the enamel-forming cells, the ameloblasts. Studies investigating the effects of fluoride on ameloblasts and the mechanisms of fluorosis are based on in vitro cultures as well as animal models. The use of these model systems requires a biologically relevant fluoride dose, and must be carefully interpreted in relation to human tooth formation. Based on these studies, we propose that fluoride can directly affect the ameloblasts, particularly at high fluoride levels, while at lower fluoride levels, the ameloblasts may respond to local effects of fluoride on the mineralizing matrix. A new working model is presented, focused on the assumption that fluoride increases the rate of mineral formation, resulting in a greater release of protons into the forming enamel matrix. PMID:19783795

  1. Fluoride bioaccumulation by hydroponic cultures of camellia (Camellia japonica spp.) and sugar cane (Saccharum officinarum spp.).

    PubMed

    Camarena-Rangel, Nancy; Rojas Velázquez, Angel Natanael; Santos-Díaz, María del Socorro

    2015-10-01

    The ability of hydroponic cultures of camellia and sugar cane adult plants to remove fluoride was investigated. Plants were grown in a 50% Steiner nutrient solution. After an adaptation period to hydroponic conditions, plants were exposed to different fluoride concentrations (0, 2.5, 5 and 10 mg L(-1)). Fluoride concentration in the culture medium and in tissues was measured. In sugar cane, fluoride was mainly located in roots, with 86% of it absorbed and 14% adsorbed. Sugar cane plants removed 1000-1200 mg fluoride kg(-1) dry weight. In camellia plants the highest fluoride concentration was found in leaf. Roots accumulated fluoride mainly through absorption, which was 2-5 times higher than adsorption. At the end of the experiment, fluoride accumulation in camellia plants was 1000-1400 mgk g(-1) dry weight. Estimated concentration factors revealed that fluoride bioaccumulation is 74-221-fold in camellia plants and 100-500-fold in sugar cane plants. Thus, the latter appear as a suitable candidate for removing fluoride from water due to their bioaccumulation capacity and vigorous growth rate; therefore, sugar cane might be used for phytoremediation. PMID:25930125

  2. Critical factors determining fluoride concentration in tea leaves produced from Anhui province, China.

    PubMed

    Cai, Huimei; Zhu, Xiaohui; Peng, Chuanyi; Xu, Wei; Li, Daxiang; Wang, Yijun; Fang, Shihui; Li, Yeyun; Hu, Shaode; Wan, Xiaochun

    2016-09-01

    This study investigated the fluoride present in tea plants (Camellia sinensis (L.) O. Kuntze) and its relationship to soils, varieties, seasons and tea leaf maturity. The study also explored how different manufacturing processes affect the leaching of fluoride into tea beverages. The fluoride concentration in the tea leaves was significantly correlate to the concentration of water-soluble fluoride in the soil. Different tea varieties accumulated different levels of fluoride, with varieties, Anji baicha having the highest and Nongkang zao having the lowest fluoride concentration. In eight different varieties of tea plant harvested over three tea seasons, fluoride concentration were highest in the summer and lowest in the spring in china. The fluoride concentration in tea leaves was directly related to the maturity of the tea leaves at harvest. Importantly, the tea manufacturing process did not introduced fluoride contamination. The leaching of fluoride was 6.8% and 14.1% higher in black and white tea, respectively, than in fresh tea leaves. The manufacturing step most affecting the leaching of fluoride into tea beverage was withering used in white, black and oolong tea rather than rolling or fermentation. The exposure and associated health risks for fluoride concentration in infusions of 115 commercially available teas from Chinese tea markets was determined. The fluoride concentration ranged from 5.0 to 306.0mgkg(-1), with an average of 81.7mgkg(-1). The hazard quotient (HQ) of these teas indicated that there was no risk of fluorosis from drinking tea, based on statistical analysis by Monte Carlo simulation. PMID:27162130

  3. Acceptability of Salt Fluoridation in a Rural Latino Community in the United States: An Ethnographic Study.

    PubMed

    Barker, Judith C; Guerra, Claudia; Gonzalez-Vargas, M Judy; Hoeft, Kristin S

    2016-01-01

    Compared to other population groups in the United States, caries (tooth decay) is a disproportionately prevalent disease among Latino populations, especially among low-income and rural sub-groups and children under five years of age. Fluoride is a primary preventive for caries. While water fluoridation is a major and effective public health means for delivering fluoride on a mass scale, it does not reach many rural areas or population groups such as Latinos who eschew drinking water from municipal sources. This study examines the acceptability to such groups of salt fluoridation, an alternate means of delivering fluoride long used on a global scale. An ethnographic study in California's rural Central Valley was performed. Thirty individual interviews and 5 focus groups (N = 61) were conducted in Spanish to investigate low-income Latino migrant caregivers' experiences, views and understandings of domestic salt, oral health, caries prevention and fluoride. Audio data were transcribed, translated, coded and thematically analyzed. Table salt was readily available and frequently consumed. Both adult and child daily sodium consumption was high. Despite a general feeling that it was good, and present in dentifrices or dietary supplements, most participants had little knowledge about fluoride. Concerns were raised about cardio-vascular and other possibly deleterious effects if an increase in salt consumption occurred because fluoridated salt was viewed as having 'extra' benefits. Once informed about fluoride's safety and role in caries prevention, most participants expressed willingness to use fluoridated salt, especially if it benefitted children. Reassurance about its safety and benefits, and demonstration of its taste, were important aspects of acceptance. Taste was paramount. Participants would not consume more fluoridated salt than their current salt as that would result in unpleasant changes in food flavor and taste. While salt fluoridation is acceptable, the

  4. Recovery of Acid Production in Streptococcus mutans Biofilms after Short-Term Fluoride Treatment.

    PubMed

    Dang, Minh-Huy; Jung, Ji-Eun; Lee, Dae-Woo; Song, Kwang-Yeob; Jeon, Jae-Gyu

    2016-01-01

    Fluoride is commonly used as an ingredient of topical oral hygiene measures. Despite the anti-acidogenic activities of fluoride against cariogenic biofilms, the recovery of the biofilms from fluoride damage is unclear. Herein, we investigated the recovery of acid production in Streptococcus mutans biofilms after short-term or during periodic 1-min fluoride treatments. For this study, 46-hour-old S. mutans biofilms were treated with fluoride (0-2,000 ppm F-) for 1-8 min and then incubated in saliva for 0-100 min. The 74-hour-old biofilms were also periodically treated with the fluoride concentration during biofilm formation (1 min/treatment). Changes in acidogenicity and viability were determined via pH drop and colony-forming unit assays, respectively. In this study, acid production after a 1-min fluoride treatment was recovered as saliva incubation time increased, which followed a linear pattern of concentration dependence (R = 0.99, R2 = 0.98). The recovery pattern was in a biphasic pattern, with an initial rapid rate followed by a second slow recovery. Furthermore, recovery from fluoride damage was retarded in a concentration-dependent manner as treatment time increased. In periodic 1-min fluoride treatments, acid production in the biofilms was not diminished during the non-fluoride treatment period; however, it was reduced in a concentration-dependent manner during the fluoride treatment period. The viability of the biofilm cells did not change, even at high fluoride concentrations. Collectively, our results suggest that brief fluoride treatment does not sustain anti-acidogenic activity against S. mutans in biofilms since the damage is recoverable with time. PMID:27355469

  5. Preparation and thermal decomposition of yttrium hydroxide fluorides

    NASA Astrophysics Data System (ADS)

    Nishizawa, H.; Okumoto, K.; Mitsushio, T.

    1991-06-01

    The hydrothermal treatment of Y 2O 3 in KF solution at 400°C gave single phase of yttrium hydroxide fluorides, Y(OH) 3- xF x (0.65 < x < 1.43). Rietveld refinements of X-ray powder intensity data were performed for these solid solution phases. The hexagonal UCl 3 type system was retained over the whole range of x observed. All these solid solutions were thermally decomposed to oxide fluorides up to 500°C. Single phase of metastable cubic YOF and tetragonal YO 1- XF 1+2 x were obtained at 450°C for the solid solution with x = 0.98 and x = 1.43, respectively. The interatomic distances of anions (OH -,F -), IR data, and dehydration temperature of x < 1 phases supported the existence of hydrogen bonds.

  6. Fluoride glass starting materials - Characterization and effects of thermal treatment

    NASA Technical Reports Server (NTRS)

    Chen, William; Dunn, Bruce; Shlichta, Paul; Neilson, George F.; Weinberg, Michael C.

    1987-01-01

    The production of heavy metal fluoride (HMF) glasses, and the effects of thermal treatments on the HMF glasses are investigated. ZrF4, BaF2, AlF3, LaF3, and NaF were utilized in the synthesis of zirconium-barium-lanthanum-aluminum-sodium fluoride glass. The purity of these starting materials, in particular ZrF4, is evaluated using XRD analysis. The data reveal that low temperature heating of ZrF4-H2O is effective in removing the water of hydration, but causes the production of ZrF4 and oxyfluorides; however, dehydration followed by sublimation results in the production of monoclinic ZrFe without water or oxyfluoride contaminants.

  7. Plant tissue hybrid electrode for determination of phosphate and fluoride

    SciTech Connect

    Schubert, F.; Renneberg, R.; Scheller, F.W.; Kirstein, L.

    1984-08-01

    A biosensor for inorganic phosphate and fluoride has been developed by coupling a potato (Solanum tuberosum) tissue slice and immobilized glucose oxidase with a Clark oxygen electrode. Measurement is based on the inhibition by either ion of potato acid phosphates catalyzed glucose 6-phosphate hydrolysis. The precision is 1.7% and 6.5% and the lower detection limit 2.5 X 10/sup -5/ M and 1 X 10/sup -4/ M for phosphate and fluoride, respectively. For phosphate determination the hybrid sensor is stable for 28 days or 300 assays. With a higher limit of detection the sensor can be applied in a commercial enzyme electrode based device. Its application for phosphate determination in fertilizer and urine samples is described.

  8. PROCESS OF PREPARING A FLUORIDE OF TETRAVLENT URANIUM

    DOEpatents

    Wheelwright, E.J.

    1959-02-17

    A method is described for producing a fluoride salt pf tetravalent uranium suitable for bomb reduction to metallic uranium. An aqueous solution of uranyl nitrate is treated with acetic acid and a nitrite-suppressor and then contacted with metallic lead whereby uranium is reduced from the hexavalent to the tetravalent state and soluble lead acetate is formed. Sulfate ions are then added to the solution to precipitate and remove the lead values. Hydrofluoric acid and alkali metal ions are then added causing the formation of an alkali metal uranium double-fluoride in which the uranium is in the tetravalent state. After recovery, this precipitate is suitable for using in the limited production of metallic uranium.

  9. Lubrication and failure mechanisms of graphite fluoride films

    NASA Technical Reports Server (NTRS)

    Fusaro, R. L.

    1978-01-01

    An optical microscope, equipped with a vertical illuminator and two polaroid filters (one rotatable), was used to visually study 440C HT steel surfaces lubricated with rubbed graphite fluoride films. Friction and wear results were compared to visual observations as a function of sliding distance for films applied to three surface finishes - polished, sanded, and sand-blasted. In general, the lubricating process was one of initial deformation or wear of metallic asperities into flat plateaus and then the formation of thin, layer-like, dynamic films which sheared between the flats and eventually flowed through the contact area. Failure was due to depletion of the graphite fluoride with the subsequent formation of excessive powdery metallic debris that formed a heavy, powdery film on both the rider and disk surfaces.

  10. Sources of carrier F-19 in F-18 fluoride

    SciTech Connect

    Link, J. M.; Shoner, S. C.; Krohn, K. A.

    2012-12-19

    Fluorine-18 is used for many PET radiopharmaceuticals. Theoretically {sup 18}F should be carrier free and a good candidate for nanochemistry. However, {sup 18}F has 10 to 1000 times more stable fluorine atoms than radioactive atoms. In order to understand the source of carrier fluoride and other ions associated with {sup 18}F radiosynthesis, anion concentrations of different components of {sup 18}F target systems as well as solvents and chemicals used in radiosynthesis were measured. Results: The enriched water used for production of {sup 18}F had low levels of anions. In general, the sources of anions, particularly of fluoride, were the chemical reagents used for synthesis and trace contaminants in tubing, valves and fittings. A major component of contamination was nitrate from irradiation of dissolved nitrogen gas in the target water.

  11. Magnetic behaviour of layered Ag(II) fluorides.

    PubMed

    McLain, Sylvia E; Dolgos, Michelle R; Tennant, D Alan; Turner, John F C; Barnes, Ted; Proffen, Thomas; Sales, Brian C; Bewley, Robert I

    2006-07-01

    Fluoride phases that contain the spin-1/2 4d9 Ag(II) ion have recently been predicted to have interesting or unusual magnetochemistry, owing to their structural similarity to the 3d9 Cu(II) cuprates and the covalence associated with this unusual oxidation state of silver. Here we present a comprehensive study of structure and magnetism in the layered Ag(II) fluoride Cs2AgF4, using magnetic susceptometry, inelastic neutron scattering techniques and both X-ray and neutron powder diffraction. We find that this material is well described as a two-dimensional ferromagnet, in sharp contrast to the high-T(C) cuprates and a previous report in the literature. Analyses of the structural data show that Cs2AgF4 is orbitally ordered at all temperatures of measurement. Therefore, we suggest that orbital ordering may be the origin of the ferromagnetism we observe in this material. PMID:16783361

  12. Sources of carrier F-19 in F-18 fluoride

    NASA Astrophysics Data System (ADS)

    Link, J. M.; Shoner, S. C.; Krohn, K. A.

    2012-12-01

    Fluorine-18 is used for many PET radiopharmaceuticals. Theoretically 18F should be carrier free and a good candidate for nanochemistry. However, 18F has 10 to 1000 times more stable fluorine atoms than radioactive atoms. In order to understand the source of carrier fluoride and other ions associated with 18F radiosynthesis, anion concentrations of different components of 18F target systems as well as solvents and chemicals used in radiosynthesis were measured. Results: The enriched water used for production of 18F had low levels of anions. In general, the sources of anions, particularly of fluoride, were the chemical reagents used for synthesis and trace contaminants in tubing, valves and fittings. A major component of contamination was nitrate from irradiation of dissolved nitrogen gas in the target water.

  13. Effects of Gravity on Processing Heavy Metal Fluoride Fibers

    NASA Technical Reports Server (NTRS)

    Tucker, Dennis S.; Workman, Gary L.; Smith, Guy A.

    1997-01-01

    The effects of gravity on the crystal nucleation of heavy metal fluoride fibers have been studied in preliminary experiments utilizing NASA's KC-135 reduced gravity aircraft and a microgravity sounding rocket flight. Commercially produced fibers were heated to the crystallization temperature in normal and reduced gravity. The fibers processed in normal gravity showed complete crystallization while the fibers processed in reduced gravity did not show signs of crystallization.

  14. Characterization of the terbium-doped calcium fluoride single crystal

    NASA Astrophysics Data System (ADS)

    Zheleznov, Dmitry S.; Starobor, Aleksey V.; Palashov, Oleg V.

    2015-08-01

    Optical, thermo-optical and magneto-optical characteristics of the terbium-doped (10 at.%) calcium fluoride sample were investigated. It was made the analysis, confirmed the possibility of development of a Faraday isolator and a cryogenic Faraday isolator based on the studied medium, which will provide more than 30 dB isolation ratio of laser radiation in the "eye-safe" wavelength range (1530-1620 nm) at the 5 and 20 kW power, respectively.

  15. Arsenic and fluoride in the groundwater of Mexico.

    PubMed

    Armienta, M A; Segovia, N

    2008-08-01

    Concentrations of arsenic and fluoride above Mexican drinking water standards have been detected in aquifers of various areas of Mexico. This contamination has been found to be mainly caused by natural sources. However, the specific processes releasing these toxic elements into groundwater have been determined in a few zones only. Many studies, focused on arsenic-related health effects, have been performed at Comarca Lagunera in northern México. High concentrations of fluoride in water were also found in this area. The origin of the arsenic there is still controversial. Groundwater in active mining areas has been polluted by both natural and anthropogenic sources. Arsenic-rich minerals contaminate the fractured limestone aquifer at Zimapán, Central México. Tailings and deposits smelter-rich fumes polluted the shallow granular aquifer. Arsenic contamination has also been reported in the San Antonio-El Triunfo mining zone, southern Baja California, and Santa María de la Paz, in San Luis Potosí state. Even in the absence of mining activities, hydrogeochemistry and statistical techniques showed that arsenopyrite oxidation may also contaminate water, as in the case of the Independencia aquifer in the Mexican Altiplano. High concentrations of arsenic have also been detected in geothermal areas like Los Azufres, Los Humeros, and Acoculco. Prevalence of dental fluorosis was revealed by epidemiological studies in Aguascalientes and San Luis Potosí states. Presence of fluoride in water results from dissolution of acid-volcanic rocks. In Mexico, groundwater supplies most drinking water. Current knowledge and the geology of Mexico indicate the need to include arsenic and fluoride determinations in groundwater on a routine basis, and to develop interdisciplinary studies to assess the contaminant's sources in all enriched areas. PMID:18335171

  16. Luminescence from Edge Fracture in Shocked Lithium Fluoride Crystals

    SciTech Connect

    Turley, W. D.; Stevens, G. D.; Capelle, G. A.; Grover, M.; Holtkamp, D. B.; LaLone, B. M.; Veeser, L. R.

    2013-01-01

    Light emitted from a [100] lithium fluoride crystal was characterized under shock wave compression to 28GPa followed by complete stress release at the edges. The light was examined using time-gated optical spectrometry and imaging, time-resolved optical emission measurements, and hydrodynamic modeling. The shock arrival at the circumference of the crystal was delayed relative to the center so that the two regions could be studied at different times. The majority of the light emission originated when the shock waves released at the circumference of the crystal. Unlike previously reported results for shocked lithium fluoride, we found that the light spectrum is not strictly broad band, but has spectral lines associated with atomic lithium in addition to a broad band background. Also, the emission spectrum depends strongly on the gas surrounding the sample. Based on our observations, the line emission appears to be related to fracture of the lithium fluoride crystal from the shock wave releasing at the edges. Experimenters frequently utilize lithium fluoride crystals as transparent windows for observing shock compressed samples. Because of the experimental geometries used, the shock wave in such cases often reaches the circumference of the window at nearly the same moment as when it reaches the center of the sample-window interface. Light generated at the circumference could contaminate the measurement at the interface when this light scatters into the observed region. This background light may be reduced or avoided using experimental geometries which delay the arrival of the shock wave at the edges of the crystal.

  17. Modified zirconium-eriochrome cyanine R determination of fluoride

    USGS Publications Warehouse

    Thatcher, L.L.

    1957-01-01

    The Eriochrome Cyanine R method for determining fluoride in natural water has been modified to provide a single, stable reagent solution, eliminate interference from oxidizing agents, extend the concentration range to 3 p.p.m., and extend the phosphate tolerance. Temperature effect was minimized; sulfate error was eliminated by precipitation. The procedure is sufficiently tolerant to interferences found in natural and polluted waters to permit the elimination of prior distillation for most samples. The method has been applied to 500 samples.

  18. Inorganic fluoride. Divergent effects on human proximal tubular cell viability.

    PubMed Central

    Zager, R. A.; Iwata, M.

    1997-01-01

    Fluoride (F) is a widely distributed nephrotoxin with exposure potentially resulting from environmental pollution and from fluorinated anesthetic use (eg, isoflurane). This study sought to characterize some of the subcellular determinants of fluoride cytotoxicity and to determine whether subtoxic F exposure affects tubular cell vulnerability to superimposed ATP depletion and nephrotoxic attack. Human proximal tubular cells (HK-2) were cultured with differing amounts of NaF (0 to 20 mmol/L, overlapping with clinically relevant intrarenal/urinary levels after fluorinated anesthetic use). After completing 24-hour exposures, cell injury was determined (vital dye uptake). Fluoride effects on cell deacylation ([3]H-C20:4 release) and PLA2 activity were also assessed. To determine whether subtoxic F exposure alters tubular cell susceptibility to superimposed injury, cells were exposed to subtoxic NaF doses for 0 to 24 hours and then challenged with simulated ischemia (ATP depletion plus Ca2+ overload) or a clinically relevant nephrotoxic insult (myoglobin exposure). NaF induced dose-dependent cytotoxicity (up to approximately 90% vital dye uptake and increased [3H]C20:4 release). Extracellular Ca2+ chelation (EGTA) and PLA2 inhibitor therapy (aristolochic acid, dibucaine, or mepacrine) each conferred significant protective effects. When subtoxic NaF doses were applied, partial cytosolic PLA2 depletion rapidly developed (approximately 85% within 3 hours, determined on cell extracts). These partially PLA2-depleted cells were markedly resistant to ATP depletion/Ca2+ ionophore injury and to myoglobin-induced attack (approximately 50% decrease in cell death). We conclude that 1) F induces dose-dependent cytotoxicity in cultured human proximal tubular cells, 2) this occurs, in part, via Ca(2+)- and PLA2-dependent mechanism(s), 3) partial cytosolic PLA2 depletion subsequently results, and 4) subtoxic fluoride exposure can acutely increase cell resistance to further attack

  19. Method of making carbide/fluoride/silver composites

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E. (Inventor); Dellacorte, Christopher (Inventor)

    1991-01-01

    A composition containing 30 to 70 percent chromium carbide, 5 to 20 percent soft noble metal, 5 to 20 percent metal fluorides, and 20 to 60 percent metal binder is used in a powdered metallurgy process for the production of self-lubricating components, such as bearings. The use of the material allows the self-lubricating bearing to maintain its low friction properties over an extended range of operating temperatures.

  20. Separation of High Order Harmonics with Fluoride Windows

    SciTech Connect

    Allison, Tom; van Tilborg, Jeroen; Wright, Travis; Hertlein, Marcus; Falcone, Roger; Belkacem, Ali

    2010-08-02

    The lower orders produced in high order harmonic generation can be effciently temporally separated into monochromatic pulses by propagation in a Fluoride window while still preserving their femtosecond pulse duration. We present calculations for MgF2, CaF2, and LiF windows for the third, fifth, and seventh harmonics of 800 nm. We demonstrate the use of this simple and inexpensive technique in a femtosecond pump/probe experiment using the fifth harmonic.

  1. Fluoride retention of a mucosa adhesive paste compared with other home-care fluoride products.

    PubMed

    Gabre, P; Birkhed, D; Gahnberg, L

    2008-01-01

    Home-care use of fluoride (F) requires a motivated individual and several F products rely on a person's ability to follow instructions and to cooperate with the treatment. The aim of this crossover study was to investigate concentrations, distribution in the oral cavity and duration of the elevated F concentrations after using four F products: (1) a mucosa adhesive paste with 0.1% F, (2) a mouth rinsing solution with 0.2% NaF, (3) toothpaste containing 0.5% F and (4) a tablet with 0.75 mg F. Fourteen subjects used the four products in randomized order either during the daytime or just before going to bed. The F concentration was measured both in saliva and at interproximal sites. After 6 h of sleep, the F concentration after using the mucosa adhesive paste and the mouth rinse solution was high in saliva. In the interproximal area, the adhesive paste showed the highest values. During daytime use, all the products increased the F concentration, but only the mucosa adhesive paste and the rinsing solution elevated F in saliva for up to 2 h. In the interproximal area, the paste increased the F concentration most. In conclusion, this study showed that the mucosa adhesive paste and the mouth rinse solution led to higher F concentrations and for a longer time than tablets and toothpaste. For patients who are unable to comply with traditional F treatment, an F-containing adhesive paste therefore has the potential to be a useful vehicle. For individuals who are able to cooperate, a mouth rinse with an F solution is a simple, efficient and well-known method for preventing dental caries. PMID:18523382

  2. Enhancement of luminescence in white emitting strontium fluoride core @ calcium fluoride shell nanoparticles

    NASA Astrophysics Data System (ADS)

    Kumam, Nandini; Singh, Ningthoujam Premananda; Singh, Laishram Priyobarta; Srivastava, Sri Krishna

    2015-09-01

    Synthesis of lanthanide-doped fluoride SrF2:3Dy and SrF2:3Dy@CaF2 nanoparticles with different ratios of core to shell (1:0.5, 1:1 and 1:2) has been carried out by employing ethylene glycol route. X-ray diffraction (XRD) patterns reveal that the structure of the prepared nanoparticles was of cubical shape, which is also evident in TEM images. The size of the nanoparticles for core (SrF2:3Dy) is found to increase when core is covered by shell (CaF2). It is also evident from Fourier transform infrared spectroscopy (FTIR) that ethylene glycol successfully controls the growth and acts as a shape modifier by regulating growth rate. In the photoluminescence investigation, emission spectra of SrF2:3Dy is found to be highly enhanced when SrF2:3Dy is covered by CaF2 due to the decrease of cross relaxation amongst the Dy3+-Dy3+ ions. Such type of enhancement of luminescence in homonanostructure SrF2:3Dy@CaF2 (core@shell) has not been studied so far, to the best of the authors' knowledge. This luminescent material exhibits prominently white light emitting properties as shown by the Commission Internationale d'Eclairage (CIE) chromaticity diagram. The calculated correlate colour temperature (CCT) values for SrF2:3Dy, SrF2:3Dy@CaF2 (1:0.05), SrF2:3Dy@CaF2 (1:1) and SrF2:3Dy@CaF2 (1:2) are 5475, 5476, 5384 and 5525 K, respectively, which lie in the cold white region.

  3. Rare earth fluoride nano-/microstructures: hydrothermal synthesis, luminescent properties and applications.

    PubMed

    Zhao, Qian; Xu, Zhenhe; Sun, Yaguang

    2014-02-01

    Rare earth fluoride materials have attracted wide interest and come to the forefront in nanophotonics due to their distinct electrical, optical and magnetic properties as well as their potential applications in diverse fields such as optical telecommunication, lasers, biochemical probes, infrared quantum counters, and medical diagnostics. This review presents a comprehensive overview of the flourishing field of rare earth fluorides materials in the past decade. We summarize the recent research progress on the preparation, morphology, luminescent properties and application of rare earth fluoride-based luminescent materials by hydrothermal systems. Various rare earth fluoride materials are obtained by fine-tuning of experimental conditions, such as capping agents, fluoride source, acidity, temperature and reaction time. The controlled morphology, luminescent properties and application of the rare earth fluorides are briefly discussed with typical examples. PMID:24749449

  4. Effect of concurrent chronic exposure of fluoride and aluminum on rat brain.

    PubMed

    Kaur, Tanzeer; Bijarnia, Rakesh K; Nehru, Bimla

    2009-01-01

    The present in vivo study was designed to investigate the toxic potential of fluoride alone and in conjugation with aluminum on the rat brain. The region-specific response of both elements was studied in different regions of brain, namely the cerebrum, cerebellum, and medulla oblongata. Following fluoride exposure, oxidative stress increased significantly, estimated by increased lipid peroxidation and a decrease in the activity of the antioxidant enzyme, superoxide dismutase. The neurotransmitter (e.g., dopamine, norepinephrine, and serotonin) content was also altered. However, these aspects were more pronounced in animals given fluoride and aluminum together. Histological evidence showed deprivation of neuronal integrity with higher magnitude in concurrent fluoride and aluminum exposure, as compared to fluoride alone. Thus, it can be concluded that aluminum appears to enhance the neurotoxic hazards caused by fluoride. PMID:19538017

  5. Effect of home-used water purifier on fluoride concentration of drinking water in southern Iran

    PubMed Central

    Jaafari-Ashkavandi, Zohreh; Kheirmand, Mehdi

    2013-01-01

    Background: Fluoride in drinking water plays a key role in dental health. Due to the increasing use of water-purifier, the effect of these devices on fluoride concentration of drinking water was evaluated. Materials and Methods: Drinking water samples were collected before and after passing through a home water-purifier, from four different water sources. The fluoride, calcium and magnesium concentration of the samples were measured using the quantitative spectrophotometery technique. Data were analyzed by the Wilcoxon test. P value < 0.1 was considered as significant. Results: The result showed that the concentration of fluoride was 0.05-0.61 ppm before purification and was removed completely afterward. Furthermore, other ions reduced significantly after treatment by the water purifier. Conclusion: This study revealed that this device decreases the fluoride content of water, an issue which should be considered in low and high-fluoridated water sources. PMID:24130584

  6. Fluoride accumulation in soil and vegetation in the vicinity of brick fields.

    PubMed

    Jha, S K; Nayak, A K; Sharma, Y K; Mishra, V K; Sharma, D K

    2008-04-01

    Fluoride in the soil and vegetation in the vicinity of brick field in the suburb of Lucknow, India was estimated. The water soluble fluoride (1:1) in the surface soil ranged from 0.59 ppm to 2.74 ppm where as CaCl(2) extractable fluoride ranged from 0.69 ppm to 3.18 ppm. The mean total fluoride concentration in surface soil varied from 322 microg g(-1) to 456 microg g(-1). The local vegetations grown in the area found to accumulate air borne fluoride from the brick field. The fluoride accumulation in the vegetation followed the order Mentha arvensis > Spinacea oleracea > Luffa cylindrical. PMID:18345473

  7. [Operational control of water fluoridation in Niterói, Rio de Janeiro, Brazil].

    PubMed

    Maia, Lucianne Cople; Valença, Ana Maria Gondim; Soares, Eduardo Lúcio; Cury, Jaime Aparecido

    2003-01-01

    The aim of this study was to evaluate the operational control of water fluoridation at the city water supply plant in Niterói, Rio de Janeiro, Brazil, from January to December 2000. The water treatment supervisor filled out a questionnaire on the control of water fluoridation. In addition, water samples were collected every two weeks for fluoride analysis before and after treatment. Samples were analyzed by an independent laboratory using an ion-specific electrode. According to the water treatment supervisor, the entire process for controlling fluoride concentration in the water was rigorous and complied with Brazilian guidelines, but according to testing, 96% of samples were inadequate in terms of risks/benefits of fluoride use from water. The information obtained from the plant supervisor and the test data were thus mutually inconsistent. Based on these data, an independent water fluoride concentration control program is needed to ensure the benefits of dental caries prevention for the population. PMID:12700784

  8. Identification of two different point mutations associated with the fluoride-resistant phenotype for human butyrylcholinesterase

    SciTech Connect

    Nogueira, C.P.; McGuire, M.C.; Adkins, S.; Van Der Spek, A.F.L.; La Du, B.N. ); Bartels, C.F.; Lockridge, O. Eppley Institute, Univ. of Nebraska Medical Center, Omaha, NE ); Lubrano, T.; Rubinstein, H.M. Loyola Univ. Stritch School of Medicine, Maywood, IL ); Lightstone, H. )

    1992-10-01

    The fluoride variant of human butyrylcholinesterase owes its name to the observation that it is resistant to inhibition by 0.050 mM sodium fluoride in the in vitro assay. Individuals who are heterozygous for the fluoride and atypical alleles experience about 30 min of apnea, rather than the usual 3-5 min, after receiving succinyldicholine. Earlier the authors reported that the atypical variant has a nucleotide substitution which changes Asp 70 to Gly. In the present work they have identified two different point mutations associated with the fluoride-resistant phentotype. Fluoride-1 has a nucleotide substitution which changes Thr 243 to Met (ACG to ATG). Fluoride-2 has a substitution which changes Gly 390 to Val (GGT to GTT). These results were obtained by DNA sequence analysis of the butyrylcholinesterase gene after amplification by PCR. The subjects for these analyses were 4 patients and 21 family members. 36 refs., 8 figs.

  9. High Fluoride Concentration Toothpastes for Children and Adolescents.

    PubMed

    Pretty, Iain A

    2016-01-01

    The purpose of this review is to present the available evidence to support the use of dentifrices with high (>1,500 ppm) concentrations of fluoride to help in the prevention and treatment of caries in high-risk children and adolescents. Recent evidence from high-quality systematic reviews supports the dose-response relationship between caries prevention and fluoride levels, and there is good evidence from randomised clinical trials to support the use of high fluoride dentifrices. Such products are typically prescribed oral pharmaceuticals that require thorough risk assessment by the clinician and restricting use in those less than 6 years old to cases where the risk of severe morbidity caused by caries is greater than that of aesthetically objectionable fluorosis and which should mitigate the risk of fluorosis. Further research is required on the use of population- or community-based interventions using such products and currently, the evidence for dentifrices containing more than 2,900 ppm is weaker than for those containing 2,800 ppm or less. PMID:27101304

  10. Complexation of Plutonium (IV) with Fluoride at Variable Tempeartures

    SciTech Connect

    Xia, Yuanxian; Rao, Linfeng; Friese, Judah I.; Moore, Dean A.; Bachelor, P. P.

    2009-06-10

    Complexation of Pu(IV) with fluoride was studied by solvent extraction at 25, 40 and 55 C in 2.2 mol {center_dot} kg{sup -1} HClO{sub 4}. The distribution ratio of Pu(IV) between the organic and aqueous phases decreased as the concentration of fluoride was increased due to the formation of Pu(IV)-F complexes in the aqueous phase. Two complexes, PuF{sup 3+} and PuF{sub 2}{sup 2+}, were identified under the conditions in this work and their stability constants at 25, 40 and 55 C and I = 2.2 mol {center_dot} kg{sup -1} HClO{sub 4} were determined from the distribution data. The Specific Ion Interaction approach (SIT) was used to extrapolate the constants to the state of infinite dilution. Data from this work indicate that the complexation of Pu(IV) with fluoride is endothermic and entropy-driven. The complexation becomes stronger at higher temperatures.

  11. The influence of trace elements of fluoride uptake by teeth

    NASA Astrophysics Data System (ADS)

    Anwar Chaudhri, M.; Crawford, A.

    1981-03-01

    To investigate the effect of various trace elements on fluoride uptake by teeth, the concentrations F and other trace elemenys have been simultaneously determined in different regions of the teeth from children of South Australia. Teeth cross sectioned along the median plane have been used in these investigations, and their inside enamel, dentine and amelodentinal junctions investigated separately for the trace elemental composition. Fluoride has been determined by observing the 6-7 MeV gammas for the 19F(p, αγ) 16O reaction, C by activation through the 12C( 3He, n) 14O reaction, while other trace elements have been measured by the thick target PIXE technique. Linear correlation coefficients have been calculated between the F concentrations in teeth, and those of other trace elements observed. Fluoride is found to correlate best with C, Cu and Pb, poorly with Fe, Sr, Ni and Ag, while with Br and Zn it has -ve coefficients. Student's t-test has been applied to the data to examine the significance of the variation of Fand other trace elements amongst different dental tissues from healthy and diseased teeth.

  12. Patient and parental perception of a new fluoride varnish.

    PubMed

    Berg, Joel; Riedy, Christine A; Tercero, Ashley

    2006-11-01

    The purpose of this study was to compare children's and their parents' acceptability of a new fluoride varnish that purports to have improved taste and color with a control varnish. Sixty patients, 4 to 17 years of age, attending recall appointments at the University of Washington Pediatric Dental Clinic, Seattle, Washington, were randomly assigned to receive 1 of 2 fluoride varnishes. After their appointments, patients and their parents were asked about the varnish's taste and color. There were 32 patients 4 to 7 years of age and 28 patients 8 to 17 years of age. All 8- to 17-year-olds agreed that "white varnish" was preferable to "brown varnish." Most of the 4- to 7-year-olds also agreed that white was better. The 4- to 7-year-olds did not like the taste of either varnish, but the 8- to 17-year-olds preferred the taste of white. All parents cared mostly about efficacy, but agreed that the white, better-tasting varnish was a positive improvement. Parents and their children agreed that though the white varnish is best, the taste was far from ideal for the younger children, based on its single bubble-gum flavor and the standard control fluoride varnish available. PMID:17133931

  13. Vapor phase deposition of transition metal fluoride glasses

    NASA Astrophysics Data System (ADS)

    Boulard, Brigitte; Jacoboni, Charles

    1991-08-01

    Multicomponent fluoride glasses in the PbF2-ZnF2-GaF3 (PZG) vitreous ternary system have been prepared by vapor phase deposition. The thermal stability of the deposited glass was improved by adding stabilizing agents (AlF3, NaF, LiF, InF3). The thin films, deposited on different substrates (fluoride glass, fluoride single crystal, metal, and silica glass) have been characterized by x-ray diffraction. Differential scanning calorimetry (DSC) and secondary ion mass spectroscopy (SIMS). The quality of the film, adherence, and homogeneity was controlled by scanning electronic microscopy (SEM). The optical characteristics of the film and PZG glass are given: the visible-infrared (VIS-IR) window is 0.3-8 micrometers and the refractive index 1.59+/- 0.2 depends on the lead content. Mn2+ doped films (up to 3 mole % MnF2) are optically active: Mn2+ exhibits a broad luminescence band at 560-570 nm (orange). The achieved film thickness varies from 0.5 to 80 micrometers , and the refractive index gradient approaches the required geometry for planar waveguides (doping of the film with lanthanides is in progress).

  14. Plasma assisted deposition of metal fluorides for 193nm applications

    NASA Astrophysics Data System (ADS)

    Bischoff, Martin; Sode, Maik; Gaebler, Dieter; Kaiser, Norbert; Tuennermann, Andreas

    2008-10-01

    The ArF lithography technology requires a minimization of optical losses due to scattering and absorption. Consequently it is necessary to optimize the coating process of metal fluorides. The properties of metal fluoride thin films are mainly affected by the deposition methods, their parameters, and the vacuum conditions. Until now the best results were achieved by metal boat evaporation with high substrate temperature and without plasma assistance. In fact, it was demonstrated that the plasma assisted deposition process results in optical thin films with high packing density but the losses due to absorption were extremely high for deep and vacuum ultraviolet applications. This paper will demonstrate that most of the common metal fluorides can be deposited by electron beam evaporation with plasma assistance. In comparison to other deposition methods, the prepared thin films show low absorption in the VUV spectral range, high packing density, and less water content. The densification of the thin films was performed by a Leybold LION plasma source. As working gas, a variable mixture of fluorine and argon gas was chosen. To understand the deposition process and the interaction of the plasma with the deposition material, various characterization methods like plasma emission spectroscopy and ion current measurements were implemented.

  15. Effects of chlorhexidine and fluoride on irradiated enamel and dentin.

    PubMed

    Soares, C J; Neiva, N A; Soares, P B F; Dechichi, P; Novais, V R; Naves, L Z; Marques, M R

    2011-05-01

    The effectiveness of mouthwash protocols in preventing gamma irradiation therapy damage to the ultimate tensile strength (UTS) of enamel and dentin is unknown. It was hypothesized that the use of chlorhexidine and fluoride mouthwash would maintain the UTS of dental structures. One hundred and twenty teeth were divided into 2 groups: irradiated (subjected to 60 Gy of gamma irradiation in daily increments of 2 Gy) and non-irradiated. They were then subdivided into 2 mouthwash protocols used 3 times per day: 0.12% chlorhexidine, 0.05% sodium fluoride, and control group (n = 10). The specimens were evaluated by microtensile testing. The results of the Tukey test (p < 0.05) indicated that the gamma irradiation therapy significantly reduced the UTS of the enamel, crown, and root dentin. Macromolecular alterations were suggested by optical retardation data in dentin. Structural alterations, in both substrates, were detected by scanning electron microscopy analysis. Mouthwash with 0.12% chlorhexidine partially prevented the damage to the mechanical properties of the irradiated crown dentin, whereas the 0.05% sodium-fluoride-irradiated enamel showed UTS similar to that of non-irradiated enamel. PMID:21335538

  16. The potentiometric titration of fluoride using pH electrodes

    SciTech Connect

    Selig, W.S.

    1987-07-01

    Sodium fluoride solutions with an initial pH of 4.46 yielded poorly defined endpoint breaks with a pH electrode system and Ce(III) or La(III) as titrants. At this initial pH, however, the fluoride ISE yielded acceptable S-shaped titration curves. At an initial pH of 6.30, both electrode systems and titrant combinations yielded acceptable endpoint breaks and titration curves. While a partially nonaqueous medium (50% methanol) enhanced the steepness of the endpoint breaks, the standard deviation also increased. This was possibly caused by evaporation of some of the solvent. We therefore do not see the necessity for, nor recommend a partially nonaqueous medium. There is no advantage in using Ce(III) rather than La(III) as titrant. Increasing the initial pH from 4.46 to 6.3 decreased the mean normality of the titrant (or increased the titration volume) for both electrode systems and titrants. We therefore recommend that the sodium fluoride standard solutions be adjusted to the same pH as the samples to be determined. For the most accurate results, the standardization should be done with a good approximation of the salt content of the unknown solution.

  17. Synthesis and characterization of fluoride-incorporated polyoxovanadates.

    PubMed

    Kikukawa, Yuji; Yokoyama, Taiga; Kashio, Sanae; Hayashi, Yoshihito

    2015-06-01

    The speciation studies of oxovanadates are essential to clarify their biological activities. We surveyed the distribution of oxovanadate species in the presence of halide anions with various acid concentrations in an aqueous mixed-solvent system. The presence of chloride, bromide, and iodide anions has no effects on the appearance of polyoxovanadate species observed in (51)V NMR. Those are the precedent formation of metavanadate species and decavanadates. The presence of fluoride anion during the addition of acids exhibits strong intervention in the polyoxovanadate equilibria and we found the subsequent formation of two polyoxovanadate species by (51)V NMR observation. From the estimated experimental condition, we isolated fluoride-incorporated polyoxovanadates {Et4N}4[V7O19F] and {Et4N}4[HV11O29F2], successfully. Polyanion [V7O19F](4-) is the fluoride-incorporated all V(V) state polyoxovanadate which has two different coordination environments of tetrahedral and square pyramidal vanadium units within the one anionic structural integrity. The structural gap between tetrahedral-unit-based metavanadate and octahedral-unit-based decavanadate structures may be linked by this hybrid complex. PMID:25771147

  18. Removal of fluoride from semiconductor wastewater by electrocoagulation-flotation.

    PubMed

    Hu, C Y; Lo, S L; Kuan, W H; Lee, Y D

    2005-03-01

    This work employs an anodic surfactant, sodium dodecyl sulfate (SDS), to improve the flotation performance of the electrocoagulation-flotation (ECF) process to treated fluoride containing semiconductor wastewater following calcium precipitation. The dissolved fluoride ions and CaF(2) particles in the wastewater after calcium precipitation were effectively removed in the ECF process simultaneously. The dosage of SDS required for ECF was much less than those for dispersed air flotation (DiAF) or dissolved air flotation (DAF) processes because the CaF(2) particles can be collected by hydro-fluoro-aluminum flocs in ECF. Thus, SDS only served as a frother to make the bubbles tiny and stable in the ECF defluoridation process. The interference of co-existing anions can be overcome by increasing the dosage of calcium ions and SDS. The optimum initial acidity for ECF is close to the initial fluoride concentration after calcium precipitation; the amount of SS removed dropped rapidly if the initial acidity exceeded the optimal value because the surface charge of the hydro-fluoro-aluminum particles increased. The initial acidity of the wastewater after calcium precipitation can be modified by changing the [Ca(OH)(2)]/[Ca(2+)](T) ratio and the appropriate ratio is approximately given by the acid dissociation constant of hydrofluoric acid and the initial pH of the wastewater before calcium precipitation. PMID:15743636

  19. Mortality and cancer morbidity after heavy occupational fluoride exposure.

    PubMed

    Grandjean, P; Juel, K; Jensen, O M

    1985-01-01

    A cohort of 431 male cryolite workers employed for at least six months between 1924 and 1961 was identified from personnel records at the Copenhagen cryolite factory. During this period, heavy fluoride exposure resulted in at least 74 cases of skeletal fluorosis. All workmen in the cohort were followed up in Denmark until July 1, 1981. During 1941-1981, 206 men died, while only 149.3 deaths were expected from national mortality statistics. Significant excesses were seen in the following causes of death: violent death and all cancers, in particular cancer of the respiratory system. When compared with specific mortality rates for the Copenhagen area, violent death (and suicide taken alone) remained in significant excess among employees hired before 1940. Cancer morbidity data for the 35-year period 1943-1977 showed 78 cases of malignant neoplasms in the cryolite workers against 53.2 expected for Denmark as a whole and 67.9 for Copenhagen. The excess was almost entirely due to an excess number of respiratory cancers. Cancer morbidity showed no apparent correlation with length of employment or time from first exposure. Because detailed information on predictors for respiratory cancer was unavailable, a possible residual effect of fluoride cannot be excluded. However, any major carcinogenic effect of heavy fluoride exposure would be very unlikely. PMID:3964992

  20. Development of a passive dosimeter for hydrogen fluoride monitoring

    SciTech Connect

    Young, M.S.; Monat, J.P.

    1983-02-01

    Hydrogen fluoride (HF), a toxic industrial chemical, is used in the manufacture of most fluorine products and in many other industrial processes. Major uses are in fluorocarbon manufacture, aluminum production, glass etching, steel pickling, uranium processing, and as a catalyst for petroleum refining. A reliable passive dosimeter has been developed for sampling of airborne hydrogen fluoride vapor. The device is small (7.7 cm x 5.4 cm x 1.9 cm) and can easily and conveniently be worn on one's lapel. It consists of polyethylene and polypropylene parts and an alkaline impregnated polypropylene collection element. It is completely self-contained requiring no pumps, impingers, or sampling tubes. Subsequent to sampling, the collection element is analyzed quickly and easily with a fluoride selective-ion electrode. Laboratory tests were conducted to determine precision, linearity, interference effects, influences of temperature and humidity, and collection element stability over time. Results of the tests indicate that the Gasbadge/sup TM/ HF dosimeter is an excellent passive HF monitor for work spaces, and that results obtained with it are accurate within +/- 17.4% in the action range and +/- 10.3% overall. These results have been corroborated in a field study. (JMT)