Science.gov

Sample records for 40-fold molar excess

  1. Molar heat capacity and molar excess enthalpy measurements in aqueous amine solutions

    NASA Astrophysics Data System (ADS)

    Poozesh, Saeed

    Experimental measurements of molar heat capacity and molar excess enthalpy for 1, 4-dimethyl piperazine (1, 4-DMPZ), 1-(2-hydroxyethyl) piperazine (1, 2-HEPZ), I-methyl piperazine (1-MPZ), 3-morpholinopropyl amine (3-MOPA), and 4-(2-hydroxy ethyl) morpholine (4, 2-HEMO) aqueous solutions were carried out in a C80 heat flow calorimeter over a range of temperatures from (298.15 to 353.15) K and for the entire range of the mole fractions. The estimated uncertainty in the measured values of the molar heat capacity and molar excess enthalpy was found to be +/- 2%. Among the five amines studied, 3-MOPA had the highest values of the molar heat capacity and 1-MPZ the lowest. Values of molar heat capacities of amines were dominated by --CH 2, --N, --OH, --O, --NH2 groups and increased with increasing temperature, and contributions of --NH and --CH 3 groups decreased with increasing temperature for these cyclic amines. Molar excess heat capacities were calculated from the measured molar heat capacities and were correlated as a function of the mole fractions employing the Redlich-Kister equation. The molar excess enthalpy values were also correlated as a function of the mole fractions employing the Redlich-Kister equation. Molar enthalpies at infinite dilution were derived. Molar excess enthalpy values were modeled using the solution theory models: NRTL (Non Random Two Liquid) and UNIQUAC (UNIversal QUAsi Chemical) and the modified UNIFAC (UNIversal quasi chemical Functional group Activity Coefficients - Dortmund). The modified UNIFAC was found to be the most accurate and reliable model for the representation and prediction of the molar excess enthalpy values. Among the five amines, the 1-MPZ + water system exhibited the highest values of molar excess enthalpy on the negative side. This study confirmed the conclusion made by Maham et al. (71) that -CH3 group contributed to higher molar excess enthalpies. The negative excess enthalpies were reduced due to the contribution of

  2. Excess molar enthalpies of binary mixtures containing mono- and polybromoalkanes at 298.15 K

    SciTech Connect

    Blanco, S.T.; Munoz, J.; Velasco, I.; Otin, S.

    1995-05-01

    An isobaric and quasi-isothermic calorimeter has been used to determine excess molar enthalpies, H{sub m}{sup E}, at 298.15 K and atmospheric pressure for 10 binary mixtures containing dibromomethane, tribromomethane, 1,2-dibromoethane, 1,1,2,2-tetrabromoethane, and 1-bromopropane. H{sub m}{sup E} values for these mixtures are negative except for 1,2-dibromoethane or dibromomethane + 1-bromopropane and 1,1,2,2-tetrabromoethane + tribromomethane.

  3. Excess properties for 1-butanethiol + heptane, + cyclohexane, + benzene, and + toluene. 2. Excess molar enthalpies at 283.15, 298.15, and 333.15 K

    SciTech Connect

    Allred, G.C.; Beets, J.W.; Parrish, W.R.

    1995-09-01

    Thiols (mercaptans) are industrially important because of their occurrence in petroleum, their use as chemical intermediates, and their involvement in environmental problems. Excess molar enthalpies of binary mixtures of 1-butanethiol + heptane, + cyclohexane, + benzene, or + toluene have been determined at 283.15, 298.15, 333.15 K with a flow mixing calorimeter, and at 283.15 and 298.15 K with a titration calorimeter. Partial molar enthalpies have been derived from the titration calorimetric results. Where results were obtained by both methods, they were combined to obtain the best estimate of excess enthalpy for all compositions. Equimolar excess enthalpies for 1-butanethiol + heptane or + cyclohexane are endothermic and are comparable to the equimolar excess enthalpies for 1-butanol + heptane or + cyclohexane. Excess enthalpies of 1-butanethiol + alkane systems, which is contrary to the trend observed in 1-butanol + aromatic systems compared to 1-butanol + alkane systems. The excess enthalpy of 1-butanethiol + toluene is weakly exothermic.

  4. Spectrum of excess partial molar absorptivity. I. Near infrared spectroscopic study of aqueous acetonitrile and acetone.

    PubMed

    Koga, Yoshikata; Sebe, Fumie; Minami, Takamasa; Otake, Keiko; Saitow, Ken-ichi; Nishikawa, Keiko

    2009-09-03

    We study the mixing schemes or the molecular processes occurring in aqueous acetonitrile (ACN) and acetone (ACT) by near-infrared spectroscopy (NIR). Both solutions (any other aqueous solutions) are not free from strong and complex intermolecular interactions. To tackle such a many-body problem, we first use the concept of the excess molar absorptivity, epsilonE, which is a function of solute mole fraction in addition to that of wavenumber, nu. The plots of epsilonE calculated from NIR spectra for both aqueous solutions against nu showed two clearly separated bands at 5020 and 5230 cm(-1); the former showed negative and the latter positive peaks. At zero and unity mole fractions of solute, epsilonE is identically zero independent of nu. Similar to the thermodynamic excess functions, both negative and positive bands grow in size from zero to the minimum (or the maximum) and back to zero, as the mole fraction varies from 0 to 1. Since the negative band's nu-locus coincides with the NIR spectrum of ice, and the positive with that of liquid H(2)O, we suggest that on addition of solute the "ice-likeness" decreases and the "liquid-likeness" increases, reminiscent of the two-mixture model for liquid H(2)O. The modes of these variations, however, are qualitatively different between ACN-H(2)O and ACT-H(2)O. The former ACN is known to act as a hydrophobe and ACT as a hydrophile from our previous thermodynamic studies. To see the difference more clearly, we introduced and calculated the excess partial molar absorptivity of ACN and ACT, epsilon(E)(N) and epsilon(E)(T), respectively. The mole fraction dependences of epsilon(E)(N) and epsilon(E)(T) show qualitatively different behavior and are consistent with the detailed mixing schemes elucidated by our earlier differential thermodynamic studies. Furthermore, we found in the H(2)O-rich region that the effect of hydrophobic ACN is acted on the negative band at 5020 cm(-1), while that of hydrophilic ACT is on the positive high

  5. Excess molar volumes of mixtures of hexane + natural oils from 298.15 to 313.15 K

    SciTech Connect

    Gonzalez, C.; Resa, J.M.; Ruiz, A.; Gutierrez, J.I.

    1997-03-01

    Excess molar volume data for mixtures containing hexane with three edible oils: olive, corn, and pip of grape have been determined from density measurements at various temperatures between 298.15 and 313.15 K using a vibrating tube densimeter. Results have been correlated by the Redlich-Kister equation. Systems showed negative deviations from ideality in the whole composition range.

  6. Spectrum of excess partial molar absorptivity. Part II: a near infrared spectroscopic study of aqueous Na-halides.

    PubMed

    Sebe, Fumie; Nishikawa, Keiko; Koga, Yoshikata

    2012-04-07

    Our earlier thermodynamic studies suggested that F(-) and Cl(-) form hydration shells with the hydration number 14 ± 2 and 2.3 ± 0.6, respectively, and leave the bulk H(2)O away from hydration shells unperturbed. Br(-) and I(-), on the other hand, form hydrogen bonds directly with the momentarily existing hydrogen bond network of H(2)O, and retard the degree of entropy-volume cross fluctuation inherent in liquid H(2)O. The effect of the latter is stronger for I(-) than Br(-). Here we seek additional information about this qualitative difference between Cl(-) and (Br(-) and I(-)) pair by near infrared (NIR) spectroscopy. We analyze the ν(2) + ν(3) band of H(2)O in the range 4600-5500 cm(-1) of aqueous solutions of NaCl, NaBr and NaI, by a new approach. From observed absorbance, we calculate excess molar absorptivity, ε(E), excess over the additive contributions of solute and solvent. ε(E) thus contains information about the effect of inter-molecular interactions in the ν(2) + ν(3) spectrum. The spectrum of ε(E) shows three bands; two negative ones at 5263 and 4873 cm(-1), and the positive band at 5123 cm(-1). We then define and calculate the excess partial molar absorptivity of each salt, ε(E)(salt). From the behaviour of ε(E)(salt) we suggest that the negative band at 5263 cm(-1) represents free H(2)O without much hydrogen bonding under the influence of local electric field of ions. Furthermore, from a sudden change in the x(salt) (mole fraction of salt) dependence of ε(E)(salt), we suggest that there is an ion-pairing in x(salt) > 0.032, 0.036, and 0.04 for NaCl, NaBr and NaI respectively. The positive band of ε(E) at 5123 cm(-1) is attributed to a modestly organized hydrogen bond network of H(2)O (or liquid-likeness), and the x(salt) dependence of ε indicated a qualitative difference in the effect of Cl(-) from those of Br(-) and I(-). Namely, the values of ε(E)(salt) stay constant for Cl(-) but those for Br(-) and I(-) decrease smoothly on

  7. Temperature Dependence of Densities and Excess Molar Volumes of the Ternary Mixture (1-Butanol + Chloroform + Benzene) and its Binary Constituents (1-Butanol + Chloroform and 1-Butanol + Benzene)

    NASA Astrophysics Data System (ADS)

    Smiljanić, Jelena D.; Kijevčanin, Mirjana Lj.; Djordjević, Bojan D.; Grozdanić, Dušan K.; Šerbanović, Slobodan P.

    2008-04-01

    Densities ρ of the 1-butanol + chloroform + benzene ternary mixture and the 1-butanol + chloroform and 1-butanol + benzene binaries have been measured at six temperatures (288.15, 293.15, 298.15, 303.15, 308.15, and 313.15) K and atmospheric pressure, using an oscillating U-tube densimeter. From these densities, excess molar volumes ( V E) were calculated and fitted to the Redlich Kister equation for all binary mixtures and to the Nagata and Tamura equation for the ternary system. The Radojković et al. equation has been used to predict excess molar volumes of the ternary mixtures. Also, V E data of the binary systems were correlated by the van der Waals (vdW1) and Twu Coon Bluck Tilton (TCBT) mixing rules coupled with the Peng Robinson Stryjek Vera (PRSV) equation of state. The prediction and correlation of V E data for the ternary system were performed by the same models.

  8. Densities, refractive indices, and excess molar volumes of the ternary systems water + methanol + 1-octanol and water + ethanol + 1-octanol and their binary mixtures at 298. 15 K

    SciTech Connect

    Arce, A.; Blanco, A.; Soto, A.; Vidal, I. )

    1993-04-01

    The densities, refractive indices, and excess molar volumes of the ternary systems water + methanol + 1-octanol and water + ethanol + 1-octanol have been determined at 298.15 K. These physical properties are easily measured, and the authors' tabulated data thus allow indirect determination of the composition of arbitrary mixtures. The authors have found no directly comparable data in the literature, though data are available for the binary mixtures formed by these components and for other ternary mixtures containing these binary systems. The excess volumes have been correlated using Redlich-Kister functions.

  9. Molar and excess volumes of liquid In-Sb, Mg-Sb, and Pb-Sb alloys

    SciTech Connect

    Hansen, A.R.; Kaminski, M.A. ); Eckert, C.A. )

    1990-04-01

    By a direct Archimedes' technique, volumetric data were obtained for liquid In, Mg, Pb, and Sb and mixtures of In-Sb, Mg-Sb, and Pb-Sb. In this paper the excess volumes for the alloys studied are presented and discussed.

  10. Excess molar volumes of 2-(2-alkoxyethoxy)ethanols with trichloroethylene and tetrachloroethylene at 298.15 and 308.15 K

    SciTech Connect

    Pal, A.; Singh, W.

    1995-09-01

    The excess molar volumes for binary liquid mixtures of trichloroethylene, C{sub 2}Cl{sub 3}H and tetrachloroethylene, C{sub 2}Cl{sub 4}, with 2-(2-methoxyethoxy)ethanol, CH{sub 3}O(CH{sub 2}){sub 2}O(CH{sub 2}){sub 2}OH, 2-(2-ethoxyethoxy)ethanol, C{sub 2}H{sub 5}O(CH{sub 2}){sub 2}O(CH{sub 2}){sub 2}OH, and 2-(2-butoxyethoxy)ethanol, C{sub 4}H{sub 9}O(CH{sub 2}){sub 2}O(CH{sub 2}){sub 2}OH, have been measured using a continuous-dilution dilatometer over the entire mole fraction range at 298.15 and 308.15 K. The excess volumes change sign for trichloroethylene and are positive for tetrachloroethylene with 2-(2-methoxyethoxy)ethanol, 2-(2-ethoxyethoxy)ethanol, and 2-(2-butoxyethoxy)ethanol over the whole composition range at both temperatures. The measured excess volume decreases as the alkyl chain length of the alkoxyethanol increases.

  11. Studies on intermolecular interaction on binary mixtures of methyl orange-water system: excess molar functions of ultrasonic parameters at different concentrations and at different temperatures.

    PubMed

    Thanuja, B; Kanagam, Charles; Sreedevi, S

    2011-11-01

    Density (ρ), viscosity (η) and ultrasonic velocity (u) of binary mixtures of methyl orange and water were measured at different concentrations and at different temperatures; several useful parameters such as excess volume, excess velocity, and excess adiabatic compressibility have been calculated. These parameters are used to explain the nature of intermolecular interactions taking place in the binary mixture. The above study is helpful in understanding the dye/solvent interaction at different concentration and temperatures.

  12. Molar Pregnancy

    MedlinePlus

    ... cysts. In a complete molar pregnancy, there's no embryo or normal placental tissue. In a partial molar pregnancy, there's an abnormal embryo and possibly some normal placental tissue. The embryo ...

  13. First permanent molars with molar incisor hypomineralisation.

    PubMed

    Fitzpatrick, Laura; O'Connell, Anne

    2007-01-01

    Molar incisor hypomineralisation (MIH) is a common enamel defect presenting in the first permanent molars (FPM) and permanent incisors. This article presents the clinical findings and management considerations for the FPM with MIH to the general practitioner. The various treatment options are described with emphasis placed on early diagnosis as the most important prognostic factor.

  14. Removal of Deeply Impacted Mandibular Molars by Sagittal Split Osteotomy

    PubMed Central

    Isler, Sabri Cemil

    2016-01-01

    Mandibular third molars are the most common impacted teeth. Mandibular first and second molars do not share the same frequency of occurrence. In rare cases the occlusal surfaces of impacted molars are united by the same follicular space and the roots pointing in opposite direction; these are called kissing molars. In some cases, a supernumerary fourth molar can be seen as unerupted and, in this case, such a supernumerary, deeply impacted fourth molar is seen neighboring kissing molars. The extraction of deeply impacted wisdom molars from the mandible may necessitate excessive bone removal and it causes complications such as damage to the inferior alveolar nerve and iatrogenic fractures of the mandible. This case report describes the use of the sagittal split osteotomy technique to avoid extensive bone removal and protect the inferior alveolar nerve during surgical extruction of multiple impacted teeth. PMID:27429810

  15. Deciduous molar hypomineralization and molar incisor hypomineralization.

    PubMed

    Elfrink, M E C; ten Cate, J M; Jaddoe, V W V; Hofman, A; Moll, H A; Veerkamp, J S J

    2012-06-01

    This study was embedded in the Generation R Study, a population-based prospective cohort study from fetal life until young adulthood. This study focused on the relationship between Deciduous Molar Hypomineralization (DMH) and Molar Incisor Hypomineralization (MIH). First permanent molars develop during a period similar to that of second primary molars, with possible comparable risk factors for hypomineralization. Children with DMH have a greater risk of developing MIH. Clinical photographs of clean, moist teeth were taken with an intra-oral camera in 6,161 children (49.8% girls; mean age 74.3 mos, SD ± 5.8). First permanent molars and second primary molars were scored with respect to DMH or MIH. The prevalence of DMH and MIH was 9.0% and 8.7% at child level, and 4.0% and 5.4% at tooth level. The Odds Ratio for MIH based on DMH was 4.4 (95% CI, 3.1-6.4). The relationship between the occurrence of DMH and MIH suggests a shared cause and indicates that, clinically, DMH can be used as a predictor for MIH.

  16. Sextant of Sapphires for Molar Distalization

    PubMed Central

    Palla, Yudistar Venkata; Ganugapanta, Vivek Reddy

    2016-01-01

    Introduction Space analysis quantifies the amount of crowding within the arches estimating the severity of space discrepancy. The space gaining procedures include extraction and non-extraction procedures like expansion, proximal stripping and molar distalization. Aim To identify features seen in molar distalization cases. Materials and Methods The sample size comprised 20 patients in whom molar distalization was decided as the treatment plan. The study models and lateral cephalograms of all the patients were taken. Occlusograms were obtained. Model analysis and cephalometric analysis were performed. Descriptive statistical analysis like mean, standard deviation, standard error and mode were done. Results The parameters in Question gave following results. The Bolton analysis showed anterior mandibular excess with mean value of 1.56mm±1.07. The first order discrepancy between maxillary central and lateral incisors was 5±1.95. The premolar rotation showed mean value of 16.58±5.12. The molar rotation showed the value of 7.66±2.26. The nasolabial angle showed the mean of 101.25±8.7 IMPA of 101.4±5.74. Conclusion The six features studied in molar distalization cases [First order discrepancy between upper central and lateral incisors; Rotation of premolars and molars; Bolton’s discrepancy in anterior dentition; Average to horizontal growth pattern; Proclined lower incisors and Obtuse nasolabial angle] can be taken as patterns seen in molar distalization cases and considered as a valid treatment plan. PMID:27656572

  17. Molar incisor hypomineralization.

    PubMed

    Mahoney, Erin

    2012-04-01

    Molar Incisor Hypomineralization (MIH) is a common condition in New Zealand children and children around the world and can result in a significant defect in first permanent molars. This condition inevitably leads to a large amount of dental treatment for young children and may even result in the removal of their first permanent molars. This lecture will outline the understanding of the physical properties of these teeth and provide an evidence based review of the treatment options for affected teeth.

  18. ["Molar-incisor hypomineralization"].

    PubMed

    Kellerhoff, Nadja-Marina; Lussi, Adrian

    2004-01-01

    Hypocalcification of the enamel is the most common developmental disorder observed in teeth. The prevalence of this kind of hypomineralisation is about 10-19%. These molars are often referred to as cheese molars, because the lesions clinically resemble cheese in color and consistency. Other descriptions are: idiopathic enamel hypomineralisation in the permanent first molars, idiopathic enamel opacities in the permanent first molars, non fluoride enamel hypomineralisation in the permanent first molars, non-endemic mottling of enamel in the permanent first molars. Molar-Incisor Hypomineralisation is today the proposed expression for this disease. Occlusal surfaces of the first permanent molar are most commonly affected. The lesions are more frequent in the upper jaw than in the lower jaw. The incisors are affected to a lesser degree than the molars. Several aetiological factors can cause these defects. Some studies show a relation between intake of dioxins via mother's milk after prolonged breast feeding and developmental defects of the child's teeth. Because the ameloblasts are very sensitive to oxygen supply, complications involving oxygen shortages during birth or respiratory diseases such as asthma or bronchitis and pneumonia are discussed as further aetiological factors. Renal insufficiency, hypoparothyroidism, diarrhoea, malabsorption and malnutrition and high-fever diseases can be other reasons for the occurrence of these defects. Defective enamel can be a locus of lowered resistance for caries. Histologically there are areas of porosity of varying degrees. The affected teeth can be very sensitive to air, cold, warm and mechanical stimuli. Toothbrushing may create toothache in these teeth. We therefore suggest that these patients receive intensified prevention with fluoride varnish, a fissure sealing, GIZ, composits, stainless steel crowns or implants. In some cases an interdisciplinary approach with an orthodontist can result in the extraction of the molars

  19. Excessive Tanning

    PubMed Central

    Sansone, Lori A.

    2010-01-01

    Excessive tanning appears to be evident in about one quarter of regular sunbathers. Susceptible individuals are likely to be young Caucasians from Western societies. Despite ongoing education by the media to the public about the risks of excessive exposure to ultraviolet radiation and the availability of potent sunscreens, there seems to be a concurrent proliferation of tanning facilities. What might be potential psychological explanations for excessive or pathological tanning? Psychopathological explanations may exist on both Axes I and II and include substance use, obsessive-compulsive, body dysmorphic, and borderline personality disorders. While there is no known treatment for pathological sunbathing, we discuss several treatment interventions from the literature that have been successfully used for the general public. PMID:20622941

  20. Finding the perfect spot for fluorine: improving potency up to 40-fold during a rational fluorine scan of a Bruton's Tyrosine Kinase (BTK) inhibitor scaffold.

    PubMed

    Lou, Yan; Sweeney, Zachary K; Kuglstatter, Andreas; Davis, Dana; Goldstein, David M; Han, Xiaochun; Hong, Junbae; Kocer, Buelent; Kondru, Rama K; Litman, Renee; McIntosh, Joel; Sarma, Keshab; Suh, Judy; Taygerly, Joshua; Owens, Timothy D

    2015-01-15

    A rational fluorine scan based on co-crystal structures was explored to increase the potency of a series of selective BTK inhibitors. While fluorine substitution on a saturated bicyclic ring system yields no apparent benefit, the same operation on an unsaturated bicyclic ring can increase HWB activity by up to 40-fold. Comparison of co-crystal structures of parent molecules and fluorinated counterparts revealed the importance of placing fluorine at the optimal position to achieve favorable interactions with protein side chains.

  1. Taurodontism in deciduous molars

    PubMed Central

    Bafna, Yash; Kambalimath, H V; Khandelwal, Vishal; Nayak, Prathibha

    2013-01-01

    Taurodont teeth are characterised by large pulp chambers at the expense of roots. An enlarged pulp chamber, apical displacement of the pulpal floor and no constriction at the level of the cement-enamel junction are the characteristic features of taurodont tooth. It appears more frequently as an isolated anomaly but its association with syndromes and other abnormalities have also been reported. Permanent dentition is more commonly affected than deciduous dentition. This paper presents a case report of taurodontism in relation to mandibular deciduous second molars. PMID:23737594

  2. Molar incisor hypomineralization.

    PubMed

    Takahashi, Karine; Correia, Adriana de Sales Cunha; Cunha, Robson Frederico

    2009-01-01

    Enamel defects are common alterations that can occur in both the primary or permanent dentition. A range of etiological factors related to this pathology can be found in the literature. Molar Incisor Hypomineralization (MIH) is a kind of enamel defect alteration that requires complex treatment solutions, and for this reason, it is of great clinical interest for dental practice. This article describes the management of a clinical case of MIH in a 7-year-old child. The different treatment options depending on the extension of the defect, the degree of tooth eruption and the hygiene and diet habits of the patient are also discussed.

  3. Molar Incisor Hypomineralization.

    PubMed

    Rao, Murali H; Aluru, Srikanth C; Jayam, Cheranjeevi; Bandlapalli, Anila; Patel, Nikunj

    2016-07-01

    Molar incisor hypomineralization (MIH) is a developmental defect affecting teeth. High prevalence rates of MIH and its clinical implications are significant for both the patients and clinicians. A wide variation in defect prevalence (2.4-40.2%) is reported. It seems to differ with regions and various birth cohorts. Some of the recent prevalence studies are tabulated. Patient implications include hypersensitive teeth, rapid progression of caries, mastication impairment due to rapid attrition, and esthetic repercussions. Implications for clinicians include complexity in treatment planning and treatment implementation, poor prognosis of the restorations, difficulty in achieving pain control during treatment, and behavior management problems. Intention of this paper is to review the etio-pathogenesis, prevalence, clinical features, diagnostic features, and eventually present a sequential treatment approach, i.e., in accordance with current clinical practice guidelines.

  4. Controversy of the third molars.

    PubMed

    Pitekova, L; Satko, I

    2009-01-01

    Third molars are teeth that have little functional value and a relatively high rate of associated pain and disease. Their value as a part of the dentition of modern people is dubious. Our aim is to review the evolution, morbidity and complications of the third molars (Ref. 19). Full Text (Free, PDF) www.bmj.sk.

  5. Molar incisor hypomineralisation.

    PubMed

    Taylor, Greig D

    2017-03-01

    Data sourcesThe Medline and Embase databases and hand searches in the journals International Journal of Paediatric Dentistry and European Archives of Paediatric Dentistry.Study selectionEnglish language cohort and case-control studies.Data extraction and synthesisStudy selection was carried out independently by two reviewers with data abstraction being conducted by a single reviewer and checked by a second reviewer. Risk of bias was assessed using a modified version of the Newcastle-Ottawa Scale (NOS). Adjusted (aOR) and unadjusted odds ratios (uOR), P-values and 95% confidence intervals (CI) were obtained from the studies. Meta-analysis was not conducted.ResultsTwenty-eight studies were included; 25 reported on MIH, three on hypomineralised second primary molars (HSPM). Nineteen of the studies were of cohort design (six prospective,13 retrospective) and nine were case controls. There was little evidence of an association between the most frequently investigated prenatal factors (smoking, maternal illness, maternal medication, maternal stress) and MIH. Similarly there was little evidence of an association between MIH and perinatal factors such as prematurity, low birth weight, caesarean delivery and birth complications. Early childhood illness, up to three or four years of age, was widely investigated, with six studies reporting a crude association. Associations between antibiotics, anti-asthma medication and breastfeeding were also evaluated. Only three studies looked at HSPM; one study suggested that maternal antibiotic use during pregnancy is unlikely to be associated with HSPM but maternal alcohol intake may be. Another study reported possible associations with a large number of factors, with perinatal factors and neonatal illness being most common, followed by prenatal factors.ConclusionsPrenatal and perinatal factors are infrequently associated with MIH. However, despite a lack of prospective studies, early childhood illness (in particular fever) appears to

  6. Molecular simulation of excess isotherm and excess enthalpy change in gas-phase adsorption.

    PubMed

    Do, D D; Do, H D; Nicholson, D

    2009-01-29

    We present a new approach to calculating excess isotherm and differential enthalpy of adsorption on surfaces or in confined spaces by the Monte Carlo molecular simulation method. The approach is very general and, most importantly, is unambiguous in its application to any configuration of solid structure (crystalline, graphite layer or disordered porous glass), to any type of fluid (simple or complex molecule), and to any operating conditions (subcritical or supercritical). The behavior of the adsorbed phase is studied using the partial molar energy of the simulation box. However, to characterize adsorption for comparison with experimental data, the isotherm is best described by the excess amount, and the enthalpy of adsorption is defined as the change in the total enthalpy of the simulation box with the change in the excess amount, keeping the total number (gas + adsorbed phases) constant. The excess quantities (capacity and energy) require a choice of a reference gaseous phase, which is defined as the adsorptive gas phase occupying the accessible volume and having a density equal to the bulk gas density. The accessible volume is defined as the mean volume space accessible to the center of mass of the adsorbate under consideration. With this choice, the excess isotherm passes through a maximum but always remains positive. This is in stark contrast to the literature where helium void volume is used (which is always greater than the accessible volume) and the resulting excess can be negative. Our definition of enthalpy change is equivalent to the difference between the partial molar enthalpy of the gas phase and the partial molar enthalpy of the adsorbed phase. There is no need to assume ideal gas or negligible molar volume of the adsorbed phase as is traditionally done in the literature. We illustrate this new approach with adsorption of argon, nitrogen, and carbon dioxide under subcritical and supercritical conditions.

  7. Molar Intrusion in Open-bite Adults Using Zygomatic Miniplates.

    PubMed

    Marzouk, Eiman S; Abdallah, Essam Mohamed; El-Kenany, Walid A

    2015-01-01

    The aim of this study is to evaluate the skeletal, dental and soft tissue changes that arise after intrusion of the maxillary molars using zygomatic miniplates in adult skeletal anterior open bite patients. In addition to measuring the amount and rate of molar intrusion; with special emphasis on changes in the axial inclination of the intruded molars. The study group was composed of 13 anterior open bite patients (mean age 18 years, 8 months ± 2 years, 2 months) with posterior dentoalveolar excess. Mini-plates were placed in the zygomatic buttress bilaterally. The upper arch was segmentally leveled and a double Trans-Palatal Arch (TPA) was bonded. Closed NiTi coil spring was placed bilaterally between the book of the mini-plate just mesial and distal to the first molar buccal tube applying intrusive force of 450 gper side. Lateral and posteroanterior cephalograms were taken before intrusion (T1: post upper segmental leveling) and after intrusion (T2). Comparison between means before and after the intrusion was done using Wilcoxon Signed Ranks test (WSRT). Mandibular autorotation followed the molar intrusion, SNB and SN-Pog angles significantly increased while the ANB, MP-SN angle and N-S-Gn angle significantly decreased. The mean amount of accomplished molar intrusion was 3.1mm ± 0.74mm, with a rate of 0.36mm per month ± 0.08mm per month and a bite closure of 6.55mm ± 1.83mm. There was no significant buccal tip in the right and left molars upon intrusion. Conclusion: Miniplates zygomatic anchorage can be used effectively for skeletal open bite correction through posterior dento-alveolar intrusion. Intrusion of the posterior teeth with skeletal anchorage induced counterclockwise rotation of the mandible and, as a consequence, corrected the anteroposterior intermaxillary relationship with a dramatic improvement in the facial soft tissue convexity.

  8. Complications of third molar surgery.

    PubMed

    Bouloux, Gary F; Steed, Martin B; Perciaccante, Vincent J

    2007-02-01

    This article addresses the incidence of specific complications and, where possible, offers a preventive or management strategy. Injuries of the inferior alveolar and lingual nerves are significant issues that are discussed separately in this text. Surgical removal of third molars is often associated with postoperative pain, swelling, and trismus. Factors thought to influence the incidence of complications after third molar removal include age, gender, medical history, oral contraceptives, presence of pericoronitis, poor oral hygiene, smoking, type of impaction, relationship of third molar to the inferior alveolar nerve, surgical time, surgical technique, surgeon experience, use of perioperative antibiotics, use of topical antiseptics, use of intra-socket medications, and anesthetic technique. Complications that are discussed further include alveolar osteitis, postoperative infection, hemorrhage, oro-antral communication, damage to adjacent teeth, displaced teeth, and fractures.

  9. Hypomineralized Second Primary Molars as Predictor of Molar Incisor Hypomineralization.

    PubMed

    Negre-Barber, A; Montiel-Company, J M; Boronat-Catalá, M; Catalá-Pizarro, M; Almerich-Silla, J M

    2016-08-25

    Molar incisor hypomineralization (MIH) is a developmental defect of dental enamel that shares features with hypomineralized second primary molars (HSPM). Prior to permanent tooth eruption, second primary molars could have predictive value for permanent molar and incisor hypomineralization. To assess this possible relationship, a cross-sectional study was conducted in a sample of 414 children aged 8 and 9 years from the INMA cohort in Valencia (Spain). A calibrated examiner (linear-weighted Kappa 0.83) performed the intraoral examinations at the University of Valencia between November 2013 and 2014, applying the diagnostic criteria for MIH and HSPM adopted by the European Academy of Paediatric Dentistry. 100 children (24.2%) presented MIH and 60 (14.5%) presented HSPM. Co-occurrence of the two defects was observed in 11.1% of the children examined. The positive predictive value was 76.7% (63.9-86.6) and the negative predictive value 84.7% (80.6-88.3). The positive likelihood ratio (S/1-E) was 10.3 (5.9-17.9) and the negative likelihood ratio (1-S/E) 0.57 (0.47-0.68). The odds ratio was 18.2 (9.39-35.48). It was concluded that while the presence of HSPM can be considered a predictor of MIH, indicating the need for monitoring and control, the absence of this defect in primary dentition does not rule out the appearance of MIH.

  10. Molarization of Mandibular Second Premolar

    PubMed Central

    Singh Khinda, Vineet Inder; Kallar, Shiminder; Singh Brar, Gurlal

    2014-01-01

    ABSTRACT Macrodontia (megadontia, megalodontia, mac rodontism) is a rare shape anomaly that has been used to describe dental gigantism. Mandibular second premolars show an elevated variability of crown morphology, as are its eruptive potential and final position in the dental arch. To date, only eight cases of isolated macrodontia of second premolars have been reported in the literature. This case report presents clinical and radiographic findings of unusual and rare case of isolated unilateral molarization of left mandibular second premolar. How to cite this article: Mangla N, Khinda VIS, Kallar S, Brar GS. Molarization of Mandibular Second Premolar. Int J Clin Pediatr Dent 2014;7(2):137-139. PMID:25356014

  11. Hypomineralized Second Primary Molars as Predictor of Molar Incisor Hypomineralization

    PubMed Central

    Negre-Barber, A.; Montiel-Company, J. M.; Boronat-Catalá, M.; Catalá-Pizarro, M.; Almerich-Silla, J. M.

    2016-01-01

    Molar incisor hypomineralization (MIH) is a developmental defect of dental enamel that shares features with hypomineralized second primary molars (HSPM). Prior to permanent tooth eruption, second primary molars could have predictive value for permanent molar and incisor hypomineralization. To assess this possible relationship, a cross-sectional study was conducted in a sample of 414 children aged 8 and 9 years from the INMA cohort in Valencia (Spain). A calibrated examiner (linear-weighted Kappa 0.83) performed the intraoral examinations at the University of Valencia between November 2013 and 2014, applying the diagnostic criteria for MIH and HSPM adopted by the European Academy of Paediatric Dentistry. 100 children (24.2%) presented MIH and 60 (14.5%) presented HSPM. Co-occurrence of the two defects was observed in 11.1% of the children examined. The positive predictive value was 76.7% (63.9–86.6) and the negative predictive value 84.7% (80.6–88.3). The positive likelihood ratio (S/1-E) was 10.3 (5.9–17.9) and the negative likelihood ratio (1-S/E) 0.57 (0.47–0.68). The odds ratio was 18.2 (9.39–35.48). It was concluded that while the presence of HSPM can be considered a predictor of MIH, indicating the need for monitoring and control, the absence of this defect in primary dentition does not rule out the appearance of MIH. PMID:27558479

  12. Non-compliance Appliances for Upper Molar Distalization: An Overview.

    PubMed

    Noorollahian, Saeed; Alavi, Shiva; Shirban, Farinaz

    2015-01-01

    Tooth Size Arch-length Discrepancy (TSALD) is a common problem in orthodontics. Its clinical signs are tooth crowding, impaction and incisor proclination. The treatment options are dental arch expansion or tooth mass reduction (stripping or extraction). The "extraction versus non-extraction" controversy has been widely debated in the orthodontic literature. Distalization is a kind of arch expansion in anetro-posterior dimension. Several studies have evaluated both the therapeutic effectiveness and the side effects of the appliances for this method of space gaining. In some cases molar distalization is preferred, e.g., a patient with acceptable profile and skeletal pattern and half cusp Class II molar malocclusion or even less. In some cases molar distalization is the only way, e.g., the patient with previous upper premolar extraction and excessive overijet, or a skeletal Class III patient with previous upper premolar extraction needed upper anterior teeth retraction to create reverse overjet aspre surgical orthodontic decompensation. In this review article, we described non-compliance upper molar distalizing appliances.

  13. Current management of molar pregnancy.

    PubMed

    Hancock, Barry W; Tidy, John A

    2002-05-01

    Molar pregnancy remains an uncommon and still not fully understood disorder. The clinical presentation has changed over recent decades. In developed countries complete moles are now usually diagnosed early (on clinical and/or ultrasound scan criteria) so that the more severe clinical presentations are much less commonly seen. The important differences between complete and partial moles and their risk factors are now well recognized. Common protocols for managing persistent gestational trophoblastic disease are being derived, and molecular genetic studies are advancing our understanding of molar pregnancy and its sequelae. Cure rates approaching 100% should now be the rule rather than the exception. There is a strong case for formal registration and monitoring of all cases through specialist centers.

  14. Mandibular lip bumper for molar torque control.

    PubMed

    Celentano, Giuseppe; Longobardi, Annalisa; Cannavale, Rosangela; Perillo, Letizia

    2011-01-01

    Treatment effects of lip bumpers alone include flaring of the mandibular incisors, distalization and uprighting of the mandibular first molars, and buccal expansion of the canines, premolars, and molar. Lip forces are transmitted through this appliance onto the molars. Moreover the lip bumper is able to derotate, expand or constrict, upright and reinforce the anchorage whereas torque control is lacking. Aim of this paper is the presentation of a new type of lip bumper that allows the molar torque control.

  15. Molar versus as a paradigm clash.

    PubMed Central

    Baum, W M

    2001-01-01

    The molar view of behavior arose in response to the demonstrated inadequacy of explanations based on contiguity. Although Dinsmoor's (2001) modifications to two-factor theory render it irrefutable, a more basic criticism arises when we see that the molar and molecular views differ paradigmatically. The molar view has proven more productive. PMID:11453623

  16. Extinction as discrimination: the molar view.

    PubMed

    Baum, William M

    2012-05-01

    The traditional molecular view of behavior explains extinction as the dissipation or inhibition of strength, formerly built up by contiguous reinforcement. In obstinate opposition to this explanation was the partial-reinforcement extinction effect: a partially reinforced response extinguishes more slowly than a continuously reinforced response. It suggests instead that extinction is discrimination. Four pigeons were exposed to daily sessions in which a variable period of food delivery, produced by pecking on a variable-interval schedule, was followed by extinction. The rate of food delivery was varied over a wide range across conditions. Varying the amount of food per delivery inversely with rate of delivery kept response rate from varying excessively. The results confirmed and extended the partial-reinforcement effect; persistence of pecking and time to extinction were inversely related to rate of obtaining food. The results support the molar view of extinction, not as loss of strength of a particular discrete response, but as a transition from one allocation of time among activities to another. Although molecular theories dismiss discrimination due to repeated training and extinction as an impurity or complication, repeated cycles of availability and privation are probably typical of the environment in which most vertebrate species evolved.

  17. Problems of Excess Capacity

    NASA Technical Reports Server (NTRS)

    Douglas, G.

    1972-01-01

    The problems of excess capacity in the airline industry are discussed with focus on the following topics: load factors; fair rate of return on investment; service-quality rivalry among airlines; pricing (fare) policies; aircraft production; and the impacts of excess capacity on operating costs. Also included is a discussion of the interrelationships among these topics.

  18. Excessive acquisition in hoarding.

    PubMed

    Frost, Randy O; Tolin, David F; Steketee, Gail; Fitch, Kristin E; Selbo-Bruns, Alexandra

    2009-06-01

    Compulsive hoarding (the acquisition of and failure to discard large numbers of possessions) is associated with substantial health risk, impairment, and economic burden. However, little research has examined separate components of this definition, particularly excessive acquisition. The present study examined acquisition in hoarding. Participants, 878 self-identified with hoarding and 665 family informants (not matched to hoarding participants), completed an Internet survey. Among hoarding participants who met criteria for clinically significant hoarding, 61% met criteria for a diagnosis of compulsive buying and approximately 85% reported excessive acquisition. Family informants indicated that nearly 95% exhibited excessive acquisition. Those who acquired excessively had more severe hoarding; their hoarding had an earlier onset and resulted in more psychiatric work impairment days; and they experienced more symptoms of obsessive-compulsive disorder, depression, and anxiety. Two forms of excessive acquisition (buying and free things) each contributed independent variance in the prediction of hoarding severity and related symptoms.

  19. Excessive Blinking in Children

    MedlinePlus

    ... scratch on the front surface of the eye), conjunctivitis (pink eye), foreign body in the eye, or ... is excessive blinking treated? If an abrasion or conjunctivitis is diagnosed, eye drops or ointment may be ...

  20. A Molar Pregnancy within the Fallopian Tube

    PubMed Central

    Dawson, Charlotte; Nascu, Patricia; Rouse, Tyler

    2016-01-01

    Background. Discussion of the incidence of molar pregnancy and ectopic pregnancy. Role of salpingostomy and special considerations for postoperative care. Case. The patient is a 29-year-old G7P4 who presented with vaginal bleeding in the first trimester and was initially thought to have a spontaneous abortion. Ultrasound was performed due to ongoing symptoms and an adnexal mass was noted. She underwent uncomplicated salpingostomy and was later found to have a partial molar ectopic pregnancy. Conclusion. This case illustrates the rare occurrence of a molar ectopic pregnancy. There was no indication of molar pregnancy preoperatively and this case highlights the importance of submitting and reviewing pathological specimens. PMID:28044117

  1. Nonaccommodative convergence excess.

    PubMed

    von Noorden, G K; Avilla, C W

    1986-01-15

    Nonaccommodative convergence excess is a condition in which a patient has orthotropia or a small-angle esophoria or esotropia at distance and a large-angle esotropia at near, not significantly reduced by the addition of spherical plus lenses. The AC/A ratio, determined with the gradient method, is normal or subnormal. Tonic convergence is suspected of causing the convergence excess in these patients. Nonaccommodative convergence excess must be distinguished from esotropia with a high AC/A ratio and from hypoaccommodative esotropia. In 24 patients treated with recession of both medial recti muscles with and without posterior fixation or by posterior fixation alone, the mean correction of esotropia was 7.4 prism diopters at distance and 17 prism diopters at near.

  2. [Excessive daytime sleepiness].

    PubMed

    Bittencourt, Lia Rita Azeredo; Silva, Rogério Santos; Santos, Ruth Ferreira; Pires, Maria Laura Nogueira; Mello, Marco Túlio de

    2005-05-01

    Sleepiness is a physiological function, and can be defined as increased propension to fall asleep. However, excessive sleepiness (ES) or hypersomnia refer to an abnormal increase in the probability to fall asleep, to take involuntary naps, or to have sleep atacks, when sleep is not desired. The main causes of excessive sleepiness is chronic sleep deprivation, sleep apnea syndrome, narcolepsy, movement disorders during sleep, circadian sleep disorders, use of drugs and medications, or idiopathic hypersomnia. Social, familial, work, and cognitive impairment are among the consequences of hypersomnia. Moreover, it has also been reported increased risk of accidents. The treatment of excessive sleepiness includes treating the primary cause, whenever identified. Sleep hygiene for sleep deprivation, positive pressure (CPAP) for sleep apnea, dopaminergic agents and exercises for sleep-related movement disorders, phototherapy and/or melatonin for circadian disorders, and use of stimulants are the treatment modalities of first choice.

  3. Density and molar volumes of imidazolium-based ionic liquid mixtures and prediction by the Jouyban-Acree model

    NASA Astrophysics Data System (ADS)

    Ghani, Noraini Abd; Sairi, Nor Asrina; Mat, Ahmad Nazeer Che; Khoubnasabjafari, Mehry; Jouyban, Abolghasem

    2016-11-01

    The density of imidazolium-based ionic liquid, 1-ethyl-3-methylimidazolium diethylphosphate with sulfolane were measured at atmospheric pressure. The experiments were performed at T= (293 - 343) K over the complete mole fractions. Physical and thermodynamic properties such as molar volumes, V0, and excess molar volumes, VE for this binary mixtures were derived from the experimental density data. The Jouyban-Acree model was exploited to correlate the physicochemical properties (PCPs) of binary mixtures at various mole fractions and temperatures.

  4. Dentinal innervation of impacted human third molars.

    PubMed

    Lilja, J; Fagerberg-Mohlin, B

    1984-12-01

    Five totally impacted third molars were studied in the transmission electron microscope for the presence of nervous structures in the dentin before eruption. In contradiction to earlier studies available, nervous structures were found in the predentin and the dentin of the impacted third molars in different parts of the crown and also in the predentin of the root.

  5. Densities, Ultrasonic Speeds, and Excess Properties of Binary Mixtures of Diethylene Glycol with 1-Butanol, 2-Butanol, and 1,4-Butanediol at Different Temperatures

    NASA Astrophysics Data System (ADS)

    Ali, Anwar; Ansari, Sana; Uzair, Sahar; Tasneem, Shadma; Nabi, Firdosa

    2015-11-01

    Densities ρ and ultrasonic speeds u for pure diethylene glycol, 1-butanol, 2-butanol, and 1,4-butanediol and for their binary mixtures over the entire composition range were measured at 298.15 K, 303.15 K, 308.15 K, and 313.15 K. Using these data, the excess molar volumes, VE_m, deviations in isentropic compressibilities, {\\varDelta }ks, apparent molar volumes, V_{φi} , partial molar volumes, overline{V}_{m,i} , and excess partial molar volumes, overline{V}_{m,i}^E , have been calculated over the entire composition range, and also the excess partial molar volumes of the components at infinite dilution, overline{V}_{m,i}^{E,infty } have been calculated. The excess functions have been correlated using the Redlich-Kister equation at different temperatures. The variations of these derived parameters with composition and temperature are presented graphically.

  6. The wisdom behind third molar extractions.

    PubMed

    Kandasamy, S; Rinchuse, D J; Rinchuse, D J

    2009-12-01

    The literature pertaining to the extraction of third molars is extensive. There is a large individual variation and a multitude of practitioners' beliefs and biases relating to the extraction of especially asymptomatic and pathology free third molars. With the current emphasis in dentistry being placed on clinicians to make evidence-based decisions, the routine removal of third molars has been re-assessed and questioned. The purpose of this paper was to evaluate past and present knowledge of third molar extractions and relate it to logical considerations relevant to science and the evidence-based decision-making process. This paper endeavours to encourage and stimulate clinicians to re-evaluate their views on third molar extractions based on suggested guidelines and current evidence.

  7. General technique of third molar removal.

    PubMed

    Farish, Sam E; Bouloux, Gary F

    2007-02-01

    The most commonly performed surgical procedure in most oral and maxillofacial surgery practices is the removal of impacted third molars. Extensive training, skill, and experience allow this procedure to be performed in an atraumatic fashion with local anesthesia, sedation, or general anesthesia. The decision to remove symptomatic third molars is not usually difficult, but the decision to remove asymptomatic third molars is sometimes less clear and requires clinical experience. A wide body of literature (discussed elsewhere in this issue) attempts to establish clinical practice guidelines for dealing with impacted teeth. Data is beginning to accumulate from third molar studies, which hopefully will provide surgeons and their patients with evidence-based guidelines regarding elective third molar surgery.

  8. Lateral stress evolution in chromium sulfide cermets with varying excess chromium

    NASA Astrophysics Data System (ADS)

    Petel, O. E.; Appleby-Thomas, G. J.; Wood, D. C.; Capozzi, A.; Nabavi, A.; Goroshin, S.; Frost, D. L.; Hazell, P. J.

    2016-04-01

    The shock response of chromium sulfide-chromium, a cermet of potential interest as a matrix material for ballistic applications, has been investigated at two molar ratios. Using a combustion synthesis technique allowed for control of the molar ratio of the material, which was investigated under near-stoichiometric (cermet) and excess chromium (interpenetrating composite) conditions, representing chromium:sulfur molar ratios of 1.15:1 and 4:1, respectively. The compacts were investigated via the plate-impact technique, which allowed the material to be loaded under a one-dimensional state of strain. Embedded manganin stress gauges were employed to monitor the temporal evolution of longitudinal and lateral components of stress in both materials. Comparison of these two components has allowed assessment of the variation of material shear strength both with impact pressure/strain-rate and time for the two molar ratio conditions. The two materials exhibited identical material strength despite variations in their excess chromium contents.

  9. Addiction as excessive appetite.

    PubMed

    Orford, J

    2001-01-01

    The excessive appetite model of addiction is summarized. The paper begins by considering the forms of excessive appetite which a comprehensive model should account for: principally, excessive drinking, smoking, gambling, eating, sex and a diverse range of drugs including at least heroin, cocaine and cannabis. The model rests, therefore, upon a broader concept of what constitutes addiction than the traditional, more restricted, and arguably misleading definition. The core elements of the model include: very skewed consumption distribution curves; restraint, control or deterrence; positive incentive learning mechanisms which highlight varied forms of rapid emotional change as rewards, and wide cue conditioning; complex memory schemata; secondary, acquired emotional regulation cycles, of which 'chasing', 'the abstinence violation effect' and neuroadaptation are examples; and the consequences of conflict. These primary and secondary processes, occurring within diverse sociocultural contexts, are sufficient to account for the development of a strong attachment to an appetitive activity, such that self-control is diminished, and behaviour may appear to be disease-like. Giving up excess is a natural consequence of conflict arising from strong and troublesome appetite. There is much supportive evidence that change occurs outside expert treatment, and that when it occurs within treatment the change processes are more basic and universal than those espoused by fashionable expert theories.

  10. HIV Excess Cancers JNCI

    Cancer.gov

    In 2010, an estimated 7,760 new cancers were diagnosed among the nearly 900,000 Americans known to be living with HIV infection. According to the first comprehensive study in the United States, approximately half of these cancers were in excess of what wo

  11. The otherness of sexuality: excess.

    PubMed

    Stein, Ruth

    2008-03-01

    The present essay, the second of a series of three, aims at developing an experience-near account of sexuality by rehabilitating the idea of excess and its place in sexual experience. It is suggested that various types of excess, such as excess of excitation (Freud), the excess of the other (Laplanche), excess beyond symbolization and the excess of the forbidden object of desire (Leviticus; Lacan) work synergistically to constitute the compelling power of sexuality. In addition to these notions, further notions of excess touch on its transformative potential. Such notions address excess that shatters psychic structures and that is actively sought so as to enable new ones to evolve (Bersani). Work is quoted that regards excess as a way of dealing with our lonely, discontinuous being by using the "excessive" cosmic energy circulating through us to achieve continuity against death (Bataille). Two contemporary analytic thinkers are engaged who deal with the object-relational and intersubjective vicissitudes of excess.

  12. Role of third molars in orthodontics

    PubMed Central

    Almpani, Konstantinia; Kolokitha, Olga-Elpis

    2015-01-01

    The role of third molars in the oral cavity has been extensively studied over the years. Literature includes numerous diagnostic and treatment alternatives regarding the third molars. However, an issue that has not been discussed at the same level is their involvement in orthodontic therapy. The aim of this study is to present a review of the contemporary literature regarding the most broadly discussed aspects of the multifactorial role of third molars in orthodontics and which are of general dental interest too. PMID:25685759

  13. Molars and incisors: show your microarray IDs

    PubMed Central

    2013-01-01

    Background One of the key questions in developmental biology is how, from a relatively small number of conserved signaling pathways, is it possible to generate organs displaying a wide range of shapes, tissue organization, and function. The dentition and its distinct specific tooth types represent a valuable system to address the issues of differential molecular signatures. To identify such signatures, we performed a comparative transcriptomic analysis of developing murine lower incisors, mandibular molars and maxillary molars at the developmental cap stage (E14.5). Results 231 genes were identified as being differentially expressed between mandibular incisors and molars, with a fold change higher than 2 and a false discovery rate lower than 0.1, whereas only 96 genes were discovered as being differentially expressed between mandibular and maxillary molars. Numerous genes belonging to specific signaling pathways (the Hedgehog, Notch, Wnt, FGF, TGFβ/BMP, and retinoic acid pathways), and/or to the homeobox gene superfamily, were also uncovered when a less stringent fold change threshold was used. Differential expressions for 10 out of 12 (mandibular incisors versus molars) and 9 out of 10 selected genes were confirmed by quantitative reverse transcription-PCR (qRT-PCR). A bioinformatics tool (Ingenuity Pathway Analysis) used to analyze biological functions and pathways on the group of incisor versus molar differentially expressed genes revealed that 143 genes belonged to 9 networks with intermolecular connections. Networks with the highest significance scores were centered on the TNF/NFκB complex and the ERK1/2 kinases. Two networks ERK1/2 kinases and tretinoin were involved in differential molar morphogenesis. Conclusion These data allowed us to build several regulatory networks that may distinguish incisor versus molar identity, and may be useful for further investigations of these tooth-specific ontogenetic programs. These programs may be dysregulated in

  14. Clinical management of the mandibular molars.

    PubMed

    Canut, J A

    1975-09-01

    The complex variety of clinical problems posed by the lower molars requires maximum care in diagnosis and in treatment planning. In this article several therapeutic solutions to these problems are presented. The need to treat positional anomalies of the second molars and to control their drifting in cases of bracing and mandibular insertion, may be an effective auxillary means of treatment of those malocclusions in which lengthening of the dental bracing zones is indicated.

  15. Formation of polyelectrolyte complexes with diethylaminoethyl dextran: charge ratio and molar mass effect.

    PubMed

    Le Cerf, Didier; Pepin, Anne Sophie; Niang, Pape Momar; Cristea, Mariana; Karakasyan-Dia, Carole; Picton, Luc

    2014-11-26

    The formation of polyelectrolyte complexes (PECs) between carboxymethyl pullulan and DEAE Dextran, was investigated, in dilute solution, with emphasis on the effect of charge density (molar ratio or pH) and molar masses. Electrophoretic mobility measurements have evidenced that insoluble PECs (neutral electrophoretic mobility) occurs for charge ratio between 0.6 (excess of polycation) and 1 (stoichiometry usual value) according to the pH. This atypical result is explained by the inaccessibility of some permanent cationic charge when screened by pH dependant cationic ones (due to the Hoffman alkylation). Isothermal titration calorimetry (ITC) indicates an endothermic formation of PEC with a binding constant around 10(5) L mol(-1). Finally asymmetrical flow field flow fractionation coupled on line with static multi angle light scattering (AF4/MALS) evidences soluble PECs with very large average molar masses and size around 100 nm, in agreement with scrambled eggs multi-association between various polyelectrolyte chains.

  16. Molar shape variability in platyrrhine primates.

    PubMed

    Nova Delgado, Mónica; Galbany, Jordi; Pérez-Pérez, Alejandro

    2016-10-01

    Recent phylogenetic analyses suggest that platyrrhines constitute a monophyletic group represented by three families: Cebidae, Atelidae, and Pitheciidae. Morphological variability between and within these three families, however, is widely discussed and debated. The aim of this study was to assess molar shape variability in platyrrhines, to explore patterns of interspecific variation among extant species, and to evaluate how molar shape can be used as a taxonomic indicator. The analyses were conducted using standard multivariate analyses of geometric morphometric data from 802 platyrrhine lower molars. The results indicated that the interspecific variation exhibited a highly homoplastic pattern related to functional adaptation of some taxa. However, phylogeny was also an important factor in shaping molar morphological traits, given that some phenotypic similarities were consistent with current phylogenetic positions. Our results show that the phylogenetic and functional signals of lower molar shape vary depending on the taxa and the tooth considered. Based on molar shape, Aotus showed closer similarities to Callicebus, as well as to some Cebidae and Ateles-Lagothrix, due to convergent evolutionary trends caused by similar dietary habits, or due to fast-evolving branches in the Aotus lineage, somewhat similar to the shape of Callicebus and Cebidae.

  17. Maxillary molar distalization with first class appliance

    PubMed Central

    Ramesh, Namitha; Palukunnu, Biswas; Ravindran, Nidhi; Nair, Preeti P

    2014-01-01

    Non-extraction treatment has gained popularity for corrections of mild-to-moderate class II malocclusion over the past few decades. The distalization of maxillary molars is of significant value for treatment of cases with minimal arch discrepancy and mild class II molar relation associated with a normal mandibular arch and acceptable profile. This paper describes our experience with a 16-year-old female patient who reported with irregularly placed upper front teeth and unpleasant smile. The patient was diagnosed to have angles class II malocclusion with moderate maxillary anterior crowding, deep bite of 4 mm on a skeletal class II base with an orthognathic maxilla and retrognathic mandible and normal growth pattern. She presented an ideal profile and so molar distalization was planned with the first-class appliance. Molars were distalised by 8 mm on the right and left quadrants and class I molar relation achieved within 4 months. The space gained was utilised effectively to align the arch and establish a class I molar and canine relation. PMID:24577171

  18. Prevalence of asymmetric molar and canine relationship.

    PubMed

    Behbehani, Faraj; Roy, Rino; Al-Jame, Badreia

    2012-12-01

    The purpose of this study was to investigate the prevalence and severity of occlusal asymmetries in the molar and canine regions in a large population-based sample of adolescent Kuwaitis. Using a stratified cluster sampling method, 1299 Kuwaiti adolescents (674 boys mean age 13.3 years and 625 girls mean age 13.2 years), representing approximately 6.7 per cent of that age stratum in the population, were examined clinically for sagittal molar and canine relationships, with a view to recording half and full-step asymmetries. In this sample, 1244 subjects were examined clinically, while for the remaining 55, pre-treatment study models were assessed. All subjects were in the early permanent dentition stage. Descriptive statistical analyses were used to determine the proportion of different molar and canine asymmetries. Antero-posterior asymmetries were found to be a distinctive and common feature of the dental arches, with half-step outweighing full-step asymmetries both in the anterior and posterior regions. The total prevalence of an asymmetric molar or canine relationship was 29.7 and 41.4 per cent, respectively, with more than 95 per cent falling in the mild category. Patient gender did not influence the prevalence or magnitude of asymmetry. The results showed a clinically significant prevalence of asymmetric molar and canine relationships, which were mainly in the category of half-step asymmetry. Class II half and full-step asymmetries were more prevalent than Class III asymmetries in the molar and canine regions.

  19. Excess flow shutoff valve

    DOEpatents

    Kiffer, Micah S.; Tentarelli, Stephen Clyde

    2016-02-09

    Excess flow shutoff valve comprising a valve body, a valve plug, a partition, and an activation component where the valve plug, the partition, and activation component are disposed within the valve body. A suitable flow restriction is provided to create a pressure difference between the upstream end of the valve plug and the downstream end of the valve plug when fluid flows through the valve body. The pressure difference exceeds a target pressure difference needed to activate the activation component when fluid flow through the valve body is higher than a desired rate, and thereby closes the valve.

  20. Anemia Due to Excessive Bleeding

    MedlinePlus

    ... Anemia Due to Excessive Bleeding Iron Deficiency Anemia Vitamin Deficiency Anemia Anemia of Chronic Disease Aplastic Anemia Autoimmune ... Anemia Due to Excessive Bleeding Iron Deficiency Anemia Vitamin Deficiency Anemia Anemia of Chronic Disease Aplastic Anemia Autoimmune ...

  1. Consequences of excess iodine

    PubMed Central

    Leung, Angela M.; Braverman, Lewis E.

    2014-01-01

    Iodine is a micronutrient that is essential for the production of thyroid hormones. The primary source of iodine is the diet via consumption of foods that have been fortified with iodine, including salt, dairy products and bread, or that are naturally abundant in the micronutrient, such as seafood. Recommended daily iodine intake is 150 μg in adults who are not pregnant or lactating. Ingestion of iodine or exposure above this threshold is generally well-tolerated. However, in certain susceptible individuals, including those with pre-existing thyroid disease, the elderly, fetuses and neonates, or patients with other risk factors, the risk of developing iodine-induced thyroid dysfunction might be increased. Hypothyroidism or hyperthyroidism as a result of supraphysiologic iodine exposure might be either subclinical or overt, and the source of the excess iodine might not be readily apparent. PMID:24342882

  2. Orthodontic extrusion of horizontally impacted mandibular molars

    PubMed Central

    Ma, Zhigui; Yang, Chi; Zhang, Shanyong; Xie, Qianyang; Shen, Yuqing; Shen, Pei

    2014-01-01

    Objective: To introduce and evaluate a novel approach in treating horizontally impacted mandibular second and third molars. Materials and methods: An orthodontic technique was applied for treatment of horizontally impacted mandibular second and third molars, which included a push-type spring for rotation first, and then a cantilever for extrusion. There were 8 mandibular third molars (M3s) and 2 second molars (M2s) in this study. Tooth mobility, extraction time, the inclination and parallelism of the impacted tooth, alveolar bone height of the adjacent tooth, and the relationship of impacted M3 and the inferior alveolar nerve (IAN) were evaluated. Results: Two horizontally impacted M2s could be upright in the arch and good occlusal relationships were obtained after treatment. All impacted M3s were successfully separated from the IAN, without any neurologic consequences. The average extraction time was 5 minutes. There was a significant change in the inclination and parallelism of the impacted tooth after treatment. A new bone apposition with the average height of 3.2 mm was noted distal to the adjacent tooth. Conclusions: This two-step orthodontic technique as presented here may be a safe and feasible alternative in management of severely horizontally impacted mandibular molars, which achieves a successful separation of M3s from the IAN and an excellent position for M2s. PMID:25419364

  3. Oxygen from Hydrogen Peroxide. A Safe Molar Volume-Molar Mass Experiment.

    ERIC Educational Resources Information Center

    Bedenbaugh, John H.; And Others

    1988-01-01

    Describes a molar volume-molar mass experiment for use in general chemistry laboratories. Gives background technical information, procedures for the titration of aqueous hydrogen peroxide with standard potassium permanganate and catalytic decomposition of hydrogen peroxide to produce oxygen, and a discussion of the results obtained in three…

  4. Lower third molar eruption following orthodontic treatment.

    PubMed

    Salehi, P; Danaie, S Momene

    2008-01-01

    This study assessed the effect of extraction and preservation of the 1st premolar on lower 3rd molar eruption. Orthodontic clinic records from 1993 to 1995 were evaluated before and after treatment and 8-9 years after treatment for 3 groups of patients: 32 with extraction of 1st premolars in both jaws, 32 with no extraction but orthodontic treatment and 48 controls with no extraction but orthodontic treatment in the upper jaws only. Successful eruption of 3rd molars was evaluated. There was a significant difference in the rates of successful eruptions in the extraction (42%), non-extraction (12%) and control (20%) groups. The findings indicate that 1st premolar extraction may increase the chance of 3rd molar eruption, leading to a lower incidence of health and economic complications.

  5. Diagnosis and treatment of molar incisor hypomineralization.

    PubMed

    Mathu-Muju, Kavita; Wright, J Timothy

    2006-11-01

    Molar incisor hypomineralization (MIH) is a relatively common condition that varies in clinical severity and can result in early loss of the permanent 6-year molars. The etiology of MIH remains unclear, and the diagnosis can be confused with more generalized enamel defects such as those that occur in amelogenesis imperfecta. The management of MIH depends largely on the severity of the enamel defect. Degrees of hypomineralization can range from mild enamel opacities to enamel that readily abrades from the tooth as it emerges into the oral cavity. Usually, severely affected molars are extremely hypersensitive, prone to rapid caries development, and can be difficult to manage in young patients. The purpose of this article is to review approaches to diagnosing and treating MIH.

  6. Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

    PubMed Central

    Sodagar, A.; Ahmad Akhoundi, M. S.; Rafighii, A.; Arab, S.

    2011-01-01

    Objective Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance. Materials and Methods Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance. Results Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm. Conclusion BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance. PMID:22457837

  7. Molar tubal ectopic pregnancy: Report of two cases.

    PubMed

    Mbarki, Chaouki; Jerbi, Emna; Hsayaoui, Najeh; Zouari, Fatma; Ben Brahim, Ehsen; Oueslati, Hedhili

    2015-06-01

    Ectopic molar pregnancy is a rare occurrence and consequently not often considered as a diagnostic possibility. We report two cases of molar hydatidiform tubal pregnancy. Diagnosis of ectopic pregnancy was confirmed on clinical biological and sonographic investigations. Diagnosis of molar pregnancy was done on histopathology. The clinical course was favorable for both patients. Although rare, molar changes can occur at any site of an ectopic pregnancy. Clinical diagnosis of a molar pregnancy is difficult but histopathology is the gold standard for diagnosis.

  8. Ectopic molar pregnancy: a case report.

    PubMed

    Bousfiha, Najoua; Erarhay, Sanaa; Louba, Adnane; Saadi, Hanan; Bouchikhi, Chahrazad; Banani, Abdelaziz; El Fatemi, Hind; Sekkal, Med; Laamarti, Afaf

    2012-01-01

    The incidence of hydatidiform moles is 1 per 1,000 pregnancies. Ectopic pregnancy occurs in 20 per 1,000 pregnancies. Thus, the incidence of the ectopic molar gestation is very rare. We report a case of tubal molar pregnancy diagnosed at the systematic histology exam of an ectopic pregnancy. We report the case of 32 years old nulliparus women who presented a vaginal bleeding, lower abdominal pain and 6 weeks amenorrhea corresponding to the last menstrual period. At the clinical examination, the arterial pressure was 100/60 mmHG. The gynecological examination was difficult because of lower abdominal pain. Serum gonadotropin activity was 3454 ui/l. Pelvic ultrasound revealed an irregular echogenic mass in the left adnexa. Diagnostic laparoscopy revealed a left-sided unruptured ampullary ectopic pregnancy. A left laparoscopic salpingectomy was performed. The systematic histologic test identified an ectopic partial molar pregnancy, which was confirmed by DNA ploidy image analysis. The patient was followed with weekly quantitative B-hCG titers until three successive B-hCG levels were negative. It is pertinent that clinicians take routine histological examination of tubal specimens in ectopic pregnancy very seriously in order to diagnose cases of ectopic molar gestations early and mount appropriate post treatment surveillance.

  9. Mass versus molar doses, similarities and differences.

    PubMed

    Chmielewska, A; Lamparczyk, H

    2008-11-01

    Generally, they are two systems expressing the amounts of active substance in a given drug product, i.e. mass and molar dose. Currently, the dose system based on the mass is widely used in which doses are expressed in grams or milligrams. On the other hand, the molar dose system is in direct relation to the number of molecules. Hence, the objective of this work was to compare both systems in order to find their advantages and disadvantages. Active substances belonging to the groups of antibiotics, nootropic agents, beta-blockers, vitamins, GABA-analog, COX-2 inhibitors, calcium channel antagonists, benzodiazepine receptor agonists, lipid-modifying agents (fibrates), non-steroidal anti-inflammatory drugs (profens), estrogens, neuroleptics, analgesics and benzodiazepines were considered. Moreover, products containing two active substances were also taken into account. These are mixtures of hydrochlorothiazide with active substances influencing the renin-angiotensin system and combined oral contraceptives. For each active substance, belonging to the groups mentioned above molar doses were calculated from mass doses and molar mass. Hence, groups of drugs with a single active substance, drugs with similar pharmacological activities, pharmaceutical alternatives, and drugs with a single active ingredient manufactured in different doses were compared in order to find which dose system describes more adequately differences between and within the groups mentioned above. Comparisons were supported by a number of equations, which theoretically justify the data, and relationships derived from calculations.

  10. Uncertainty assessment of Si molar mass measurements

    NASA Astrophysics Data System (ADS)

    Mana, G.; Massa, E.; Valkiers, S.; Willenberg, G.-D.

    2010-01-01

    The uncertainty of the Si molar mass measurement is theoretically investigated by means of a two-isotope model, with particular emphasis to the role of this measurement in the determination of the Avogadro constant. This model allows an explicit calibration formula to be given and propagation of error analysis to be made. It also shows that calibration cannot correct for non-linearity.

  11. Selenium/mercury molar ratios in freshwater, marine, and commercial fish from the USA: variation, risk, and health management.

    PubMed

    Burger, Joanna; Gochfeld, Michael

    2013-01-01

    Fish provide healthy protein as well as recreational and cultural benefits, but can also contain mercury (Hg), polychlorinated biphenyls (PCBs), and other contaminants that have adverse effects on humans and other organisms, particularly developing fetuses. Recently, some authors have suggested that a molar excess of selenium (Se) [e.g., selenium/mercury (Se/Hg) molar ratio >1] confers protection from Hg toxicity derived from fish consumption. Herein, we review our studies of Hg and Se in freshwater, marine, and commercial fish (mainly marine), examining the following: (1) whether and how Se/Hg molar ratios vary among species; (2) whether and how the molar ratios vary within species; (3) whether the molar ratios differ between freshwater and saltwater fish; (4) whether mean molar ratio values provide a reliable indication of potential risk to fish consumers; and (5) whether mean Se/Hg molar ratios are sufficiently constant (e.g., low variation) to allow for use in risk assessment, risk management, or risk communication. In saltwater fish, mean Se/Hg molar ratios varied from 0.3 in mako shark to 68.1 in whiting. For freshwater fish, the mean ratios varied from 0.68 in bowfin to 20.8 in black crappie. Commercial seafood (mainly saltwater) showed great variation in ratios; shrimp and scallops had very high ratios. There was somewhat less variability in the ratios for freshwater fish compared with the fish from saltwater, but there was no overall predictable difference in variation in Se/Hg molar ratios. For both saltwater and freshwater fish, some species with mean molar ratios above 1 had a significant proportion of individual fish with molar ratios below 1. Overall, this indicates great variation in measures of central tendencies and in measures of dispersion. We suggest that relying on the Se/Hg molar ratio as a method of predicting reduced risk from Hg toxicity is problematic because of the great variation among and within fish species, and the variation is not

  12. Incidence of distal caries in mandibular second molars due to impacted third molars: Nonintervention strategy of asymptomatic third molars causes harm? A retrospective study

    PubMed Central

    Srivastava, Nikhil; Shetty, Akshay; Goswami, Rahul Dev; Apparaju, Vijay; Bagga, Vivek; Kale, Saurabh

    2017-01-01

    Background: Removal of impacted third molars is the most common oral surgical procedure. Many investigators have questioned the necessity of removal in patients who are free of symptoms or associated pathologies. Aim: The aim of this retrospective study was to evaluate the incidence of caries on distal aspect of mandibular second molars in patients referred for corresponding third molar assessment and to identify its association with angular position and depth of the impacted mandibular third molars based on the classification of Pell and Gregory. Methodology: Records of 150 patients with impacted third molar presenting to the Department of Oral and Maxillofacial Surgery, Sri Rajiv Gandhi College of Dental Sciences and Hospital, were assessed retrospectively. The radiographic angulation and depth of mandibular third molar impaction were determined and compared to determine the relationship with incidence of caries on the distal surface of the second molar. Results: According to this study results, 37.5% cases show caries on the distal aspect of mandibular second molars. The incidence of caries with mesioangular impacted third molars was 55%. A majority of these mesioangular cases were Level B and Class I as per the Pell and Gregory classification. Conclusion: The prophylactic extraction of mandibular third molars is indicated if the angulation is between 30° and 70° and is justified by incidence of distal caries in the second molars. PMID:28251102

  13. Assessment of association between molar incisor hypomineralization and hypomineralized second primary molar

    PubMed Central

    Mittal, Rakesh; Chandak, Shweta; Chandwani, Manisha; Singh, Prabhat; Pimpale, Jitesh

    2016-01-01

    Background: The term molar incisor hypomineralization (MIH) has been described as a clinical entity of systemic origin affecting the enamel of one or all first permanent molars and also the incisors; less frequently the second primary molars have also been reported to develop hypomineralization of the enamel, along with MIH. Aim: To scrutinize the association between hypomineralized second primary molars (HSPMs) and MIH and their prevalence in schoolgoing pupils in Nagpur, Maharashtra, India and the associated severity of dental caries. Design: A sample of 1,109 pupils belonging to 3–12-year-old age group was included. The entire sample was then divided into Group I (3–5 years) and Group II (6–12 years). The scoring criteria proposed by the European Academy of Pediatric Dentistry for hypomineralization was used to score HSPM and MIH. The International Caries Detection and Assessment System II (ICDAS II) was used for appraising caries status in the hypomineralized molars. The examination was conducted by a single calibrated dentist in schools in daylight. The results, thus obtained, were statistically analyzed using Chi-square test and odds ratio. Result: Of the children examined, 10 in Group I (4.88%) had HSPM and 63 in Group II (7.11%) had MIH in at least one molar. In Group II, out of 63 subjects diagnosed with MIH, 30 subjects (48%) also had HSPM. Carious lesions with high severity were appreciated in hypomineralized molars. Conclusion: The prevalence of HSPM was 4.88% and of MIH was 7.11%. Approximately half of the affected first permanent molars were associated with HSPM. The likelihood of development of caries increased with the severity of hypomineralization defect. PMID:27011930

  14. Characterization of third molar morphometric variables.

    PubMed

    Trinks, Pablo W; Grifo, María Belén; Pari, Fernando; Amer, Mariano Ar; Sánchez, Gabriel A

    2016-09-01

    The third molar is a tooth of anatomical, surgical, prosthetic and forensic dental interest. However, there is currently a lack of updated data regarding its morphology. The aim of this study was to determine the morphometric features of third molars and their predictive capability as regards dental arch and side. Two calibrated operators (ƙ = 0.83) determined the cervicalocclusalvestibular (COV), cervicalocclusalpalatal (COP) and occlusalapical (OA) distances, mesiodistal (MD), and vestibularpalatal (VP) diameters, number of roots (R) and number of cusps (C) of 961 cadaveric third molars, both upper (n = 462) and lower (n = 499), using a CONCOR 050 thin mandible caliper (resolution 0.01 mm). Median and range for each variable were calculated and compared using Mann Whitney nonparametric test (p < 0.05). Multivariate cluster analysis was used to determine the predictive capability of each variable for dental arch and side. For upper molars (UM), 50.6% were from the right side (RS) and 49.4% from the left side (LS), while for lower molars (LM), 60.9% were from the RS and 39.1% from the LS. No significant difference was found in the study variables in LM according to side. For UM, MD diameter (10.90 mm), COP(7.42 mm) distance and number of R (3) were significantly higher (p < 0.05) forRS, and number of C (3) was higher (p < 0.0001) for LS. They were also significant predictive grouping factors for side. For dental arch, OA (17.84 mm) and COV (7.60 mm) distances, MD (11.26 mm) diameter and the number of C (5) were significantly higher (p < 0.0001) for LM, while VP (10.84 mm) and COP (7.34 mm) distances, and the number of R (3) were significantly higher (p < 0.0001) for UM. These variables were significant predictive factors for dental arch. Despite the morphometric heterogeneity of third molars, there are intrinsic parameters with predictive capability for dental arch and side, but it would be advisable to supplement this study with data from topographic occlusal

  15. Determination of the molar absorptivity of NADH.

    PubMed

    McComb, R B; Bond, L W; Burnett, R W; Keech, R C; Bowers, G N

    1976-02-01

    The molar absorptivity of NADH at 340 nm has been determined by an indirect procedure in which high-purity glucose is phosphorylated by ATP in the presence of hexokinase, coupled to oxidation of the glucose-6-phosphate by NAD+ in the presence of glucose-6-phosphate dehydrogenase. The average value from 85 independent determinations is 6317 liter mol-1 cm-1 at 25 degrees C and pH 7.8. The overall uncertainty is -4.0 to +5.5 ppt (6292 to 6352 liter mol-1 cm-1), based on a standard error of the mean of 0.48 ppt and an estimate of systematic error of -2.6 to +4.1 ppt. Effects of pH, buffer, and temperature on the molar absorptivity are also reported.

  16. Impaction of First Permanent Molars-Case Report.

    DTIC Science & Technology

    1982-06-10

    maxillary incisors . Impaction of first and second 6 molars is also reported as very uncommon. In a radiographic survey of 5,000 U.S. Army recruits, it was...second molar and fourth molar, maxillary central incisor and maxillary lateral incisor and maxillary first molar. Impacted mandibular central incisors ...old male patient sought treatment for discomfort during chewing on the left lower side of the jaw. A clinical examination revealed deep pocketing and

  17. Cusp expression of protostylid in deciduous and permanent molars

    PubMed Central

    Moreno, Sandra; Reyes, María Paula; Moreno, Freddy

    2016-01-01

    The present article is a case report on the cusp expression of protostylid in the deciduous inferior molars and in the first permanent inferior molar, in which the correspondence and bilateral symmetry of the mentioned expression can be evidenced, as well as the their relation with the foramen cecum of the mesiobuccal furrows of the deciduous and of the permanent inferior molars. PMID:28123270

  18. Enzyme Molar Fractions: A Powerful Tool for Understanding Enzyme Kinetics.

    ERIC Educational Resources Information Center

    Serra, Juan L.; And Others

    1986-01-01

    Deduces the relationship between reduced velocity and molar fractions for productive enzyme complexes; obtains the mathematical expression of molar fractions for an enzyme with two specific binding sites per molecule; and proposes a useful plot to follow the dependence of enzyme molar fractions with the concentration of one of its ligands. (JN)

  19. Cusp expression of protostylid in deciduous and permanent molars.

    PubMed

    Moreno, Sandra; Reyes, María Paula; Moreno, Freddy

    2016-01-01

    The present article is a case report on the cusp expression of protostylid in the deciduous inferior molars and in the first permanent inferior molar, in which the correspondence and bilateral symmetry of the mentioned expression can be evidenced, as well as the their relation with the foramen cecum of the mesiobuccal furrows of the deciduous and of the permanent inferior molars.

  20. Pain control after third molar surgery.

    PubMed

    Seymour, R A; Walton, J G

    1984-12-01

    The ideal agent for use after third molar surgery should alleviate pain, reduce swelling and trismus to a minimum, promote healing and have no unwanted effects. Of course, such an agent does not exist. For relief of pain, analgesics are the obvious choice. Where possible, an analgesic with additional anti-inflammatory properties should be used. There seems little to choose between aspirin, 1000 mg; diflunisal, 500 mg; ibuprofen, 400 mg and zomepirac sodium, 50 mg. In the subject allergic to aspirin and aspirin-like compounds, then paracetamol is the poor alternative. Surprisingly, the efficacy of most of the opioids in post-operative third molar pain is poor, and these drugs alone cannot be recommended for this purpose. Long-acting local anaesthetic solutions may be of value in some situations where extreme pain is likely to be a feature in the immediate post-operative period. However, there are no strict criteria for identifying such cases pre-operatively. Recent work on the use of corticosteroids would suggest that these drugs may be of value in reducing post-operative sequelae. Their future in dentistry in this rôle appears interesting and promising, and worthy of further study. Antihistamines and enzymes have been shown to be of little value, and the fact that these agents now receive little attention is evidence in its own right. The use of locally applied antimicrobials has been shown to be of little value in third molar surgery. In any case, their use is probably contraindicated because of the risk of sensitising the patient. The studies reviewed have not pointed to the effectiveness of the routine use of systemic antimicrobials in preventing or reducing postoperative sequelae after removal of impacted third molars in normal circumstances. Particular conditions, for example in patients susceptible to infection, may benefit by the use of prophylactic antimicrobials. However, each case must be judged on its individual merits, bearing in mind the attendant

  1. Orthodontic uprighting of a horizontally impacted third molar and protraction of mandibular second and third molars into the missing first molar space for a patient with posterior crossbites.

    PubMed

    Baik, Un-Bong; Kim, Myung-Rae; Yoon, Kyu-Ho; Kook, Yoon-Ah; Park, Jae Hyun

    2017-03-01

    A 22-year-old woman came with a unilateral missing mandibular first molar and buccal crossbite. The open space was closed by protraction of the mandibular left second molar and uprighting and protraction of the horizontally impacted third molar using temporary skeletal anchorage devices, and her buccal crossbite was corrected with modified palatal and lingual appliances. The total active treatment time was 36 months. Posttreatment records after 9 months showed excellent results with a stable occlusion.

  2. Complications of third molar surgery and their management.

    PubMed

    Marciani, Robert D

    2012-09-01

    The frequency and severity of untoward events associated with surgical procedures are influenced by multiple factors that may be related to the procedure, patient, and/or surgeon. Not every third molar needs to be removed. Full bony impacted lower third molars well below the cervical margin of the second molar crowns should be considered for retention. Certain deviations from normal healing should be considered to be complications. Risk factors associated with third molar removal should be carefully established and explained to the patient. Third molar surgery has a predictable postsoperative course for the average patient.

  3. [Excessive sweating related to hydromorphone].

    PubMed

    Vinit, J; Devilliers, H; Audia, S; Leguy, V; Mura, H; Falvo, N; Berthier, S; Besancenot, J-F; Bonnotte, B; Lorcerie, B

    2009-02-01

    Diffuse and abundant sweating in a middle age patient evolving for several weeks should raise suspicion of malignant lymphoma and infectious or neuroendocrine disorders before considering a drug origin. We report a patient who presented with severe and invalidating excessive sweating related to hydromorphone therapy for vertebral pain. Amongst their many reported side-effects, excessive sweating disappearing with discontinuation of the drug have been reported with some opiates.

  4. Pressure and temperature dependence of excess enthalpies of methanol + tetraethylene glycol dimethyl ether and methanol + polyethylene glycol dimethyl ether 250

    SciTech Connect

    Lopez, E.R.; Coxam, J.Y.; Fernandez, J.; Grolier, J.P.E.

    1999-12-01

    The excess molar enthalpies at 323.15 K, 373.15 K, and 423.15 K, at 8 MPa, are reported for the binary mixtures methanol + tetraethylene glycol dimethyl ether (TEGDME) and methanol + poly(ethylene glycol) dimethyl ether 250 (PEGDME 250). Excess molar enthalpies were determined with a Setaram C-80 calorimeter equipped with a flow mixing cell. For both systems, the excess enthalpies are positive over the whole composition range, increasing with temperature. The H{sup E}(x) curves are slightly asymmetrical, and their maxima are skewed toward the methanol-rich region. The excess enthalpies slightly change with the pressure, the sign of this change being composition-dependent. In the case of mixtures with TEGDME, the experimental H{sup E} values have been compared with those predicted with the Gmehling et al. version of UNIFAC (Dortmund) and the Nitta-Chao and DISQUAC group contribution models.

  5. Angle Class II, subdivision, with agenesis of mandibular second molars and extrusion of maxillary second molars *

    PubMed Central

    Tavares, Rubens Rodrigues

    2015-01-01

    This clinical case reports the treatment of an Angle Class II malocclusion in a young woman with a balanced face affected by agenesis of second and third mandibular molars and subsequent extrusion of second maxillary molars. The atypical and peculiar occlusal anomaly led to individualized treatment proposed in order to normalize dental malpositions, with subsequent rehabilitation of edentulous areas by means of a multidisciplinary approach. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) in partial fulfillment of the requirements for obtaining the title of certified by the BBO. PMID:25992995

  6. Mechanics analysis of molar tooth splitting.

    PubMed

    Barani, Amir; Chai, Herzl; Lawn, Brian R; Bush, Mark B

    2015-03-01

    A model for the splitting of teeth from wedge loading of molar cusps from a round indenting object is presented. The model is developed in two parts: first, a simple 2D fracture mechanics configuration with the wedged tooth simulated by a compact tension specimen; second, a full 3D numerical analysis using extended finite element modeling (XFEM) with an embedded crack. The result is an explicit equation for splitting load in terms of indenter radius and key tooth dimensions. Fracture experiments on extracted human molars loaded axially with metal spheres are used to quantify the splitting forces and thence to validate the model. The XFEM calculations enable the complex crack propagation, initially in the enamel coat and subsequently in the interior dentin, to be followed incrementally with increasing load. The fracture evolution is shown to be stable prior to failure, so that dentin toughness, not strength, is the controlling material parameter. Critical conditions under which tooth splitting in biological and dental settings are likely to be met, however rare, are considered.

  7. Antibiotic therapy in impacted third molar surgery.

    PubMed

    Monaco, G; Staffolani, C; Gatto, M R; Checchi, L

    1999-12-01

    The use of routine antibiotic therapy in patients undergoing surgical third molar extraction is controversial. The efficacy of antibiotic therapy in preventing postoperative complications following surgical third molar extractions was evaluated in 141 patients. In the test group (66 patients), the protocol utilized a regimen of 2 g of amoxicillin orally daily for 5 d postoperatively, starting at the completion of surgery. In the control group (75 patients), no antibiotic therapy was given. No significant difference was found between the test group and the control group in the incidence of postoperative sequelae, i.e. fever, pain, swelling and alveolar osteitis. A statistically significant association between smoking, habitual drinking and increased postoperative pain and fever was found. Patient age > or = 18 yr was positively correlated with an increased incidence of alveolar osteitis. Swelling was found to be gender-related, in that female patients experienced more swelling than male patients. No correlation was found between the time required for surgery or difficulty of extraction and post-operative pain. In conclusion, no difference was found between patients receiving postoperative amoxicillin and the control group in the incidence of postoperative sequelae.

  8. Onset of molar incisor hypomineralization (MIH).

    PubMed

    Fagrell, Tobias G; Salmon, Phil; Melin, Lisa; Norén, Jörgen G

    2013-01-01

    The etiological factors and timing of the onset of molar incisor hypomineralization (MIH) are still not clear. The aim of this study was to examine ground radial and sagittal sections from teeth diagnosed with MIH using light microscopy, polarized light microscopy and X-ray micro-computed tomography (XMCT) and to estimate the onset and timing of the MIH and to relate the hypomineralized enamel to the incremental lines. Thirteen extracted permanent first molars diagnosed MIH, were analyzed with light microscopy and XMCT. The hypomineralized areas were mainly located in the mesio-buccal cusps, starting at the enamel-dentin-junction and continuing towards the enamel surface. In a relative gray scale analysis the values decreased from the EDJ towards the enamel surface. The findings indicate that the ameloblasts in the hypomineralized enamel are capable of forming an enamel of normal thickness, but with a substantial reduction of their capacity for maturation of enamel. Chronologically, it is estimated that the timing of the disturbance is at a period during the first 6-7 months of age.

  9. Molar incisor hypomineralization, prevalence, and etiology.

    PubMed

    Allazzam, Sulaiman Mohammed; Alaki, Sumer Madani; El Meligy, Omar Abdel Sadek

    2014-01-01

    Aim. To evaluate the prevalence and possible etiological factors associated with molar incisor hypomineralization (MIH) among a group of children in Jeddah, Saudi Arabia. Methods. A group of 8-12-year-old children were recruited (n = 267) from the Pediatric Dental Clinics at the Faculty of Dentistry, King Abdulaziz University. Children had at least one first permanent molar (FPM), erupted or partially erupted. Demographic information, children's medical history, and pregnancy-related data were obtained. The crowns of the FPM and permanent incisors were examined for demarcated opacities, posteruptive breakdown (PEB), atypical restorations, and extracted FPMs. Children were considered to have MIH if one or more FPM with or without involvement of incisors met the diagnostic criteria. Results. MIH showed a prevalence of 8.6%. Demarcated opacities were the most common form. Maxillary central incisors were more affected than mandibular (P = 0.01). The condition was more prevalent in children with history of illnesses during the first four years of life including tonsillitis (P = 0.001), adenoiditis (P = 0.001), asthma (P = 0.001), fever (P = 0.014), and antibiotics intake (P = 0.001). Conclusions. The prevalence of MIH is significantly associated with childhood illnesses during the first four years of life including asthma, adenoid infections, tonsillitis, fever, and antibiotics intake.

  10. Molar Incisor Hypomineralization, Prevalence, and Etiology

    PubMed Central

    Allazzam, Sulaiman Mohammed; Alaki, Sumer Madani; El Meligy, Omar Abdel Sadek

    2014-01-01

    Aim. To evaluate the prevalence and possible etiological factors associated with molar incisor hypomineralization (MIH) among a group of children in Jeddah, Saudi Arabia. Methods. A group of 8-12-year-old children were recruited (n = 267) from the Pediatric Dental Clinics at the Faculty of Dentistry, King Abdulaziz University. Children had at least one first permanent molar (FPM), erupted or partially erupted. Demographic information, children's medical history, and pregnancy-related data were obtained. The crowns of the FPM and permanent incisors were examined for demarcated opacities, posteruptive breakdown (PEB), atypical restorations, and extracted FPMs. Children were considered to have MIH if one or more FPM with or without involvement of incisors met the diagnostic criteria. Results. MIH showed a prevalence of 8.6%. Demarcated opacities were the most common form. Maxillary central incisors were more affected than mandibular (P = 0.01). The condition was more prevalent in children with history of illnesses during the first four years of life including tonsillitis (P = 0.001), adenoiditis (P = 0.001), asthma (P = 0.001), fever (P = 0.014), and antibiotics intake (P = 0.001). Conclusions. The prevalence of MIH is significantly associated with childhood illnesses during the first four years of life including asthma, adenoid infections, tonsillitis, fever, and antibiotics intake. PMID:24949012

  11. Primary retention of first permanent mandibular molars in 29 subjects.

    PubMed

    Nielsen, Signe Hauberg; Becktor, Karin Binner; Kjaer, Inger

    2006-12-01

    This study consisted of two parts: the first part describes the aetiology behind primary retention of first permanent mandibular molars by comparing the affected molar region with the contralateral region, and the second the follow-up of the retained molars. The material comprised dental pantomograms from 29 patients (17 males and 12 females; aged 6 years 2 months to 12 years 5 months) which were sent by Danish public dental clinics to the Department of Orthodontics at Copenhagen Dental School for treatment guidance (Part 1). Questionnaires were later sent to the dentists for follow-up information regarding the affected teeth (Part 2). Part 1-aetiological evaluation: From each radiograph, the number and location of the molars, maturity of individual molars, and deviations from normal morphology were recorded. The findings showed that, in an affected region, disruption of normal dental development and eruption had occurred, causing a delay in dental maturity as well as arrested eruption of the first molar. Part 2-follow-up of eruption: Completed questionnaires and radiographs were returned for 25 subjects. In 10, eruption had occurred, six after surgical removal of mucosa covering the retained first molar. In eight patients the molar had been removed while in seven the observation time from first diagnosis was too short to evaluate eruption. The results indicate that retained first permanent mandibular molars have the ability to erupt and suggest that a unilaterally retained first permanent mandibular molar may represent a temporary delay in eruption rather than permanent failure.

  12. Clinical significance of computed tomography assessment for third molar surgery

    PubMed Central

    Nakamori, Kenji; Tomihara, Kei; Noguchi, Makoto

    2014-01-01

    Surgical extraction of the third molar is the most commonly performed surgical procedure in the clinical practice of oral surgery. Third molar surgery is warranted when there is inadequate space for eruption, malpositioning, or risk for cyst or odontogenic tumor formation. Preoperative assessment should include a detailed morphologic analysis of the third molar and its relationship to adjacent structures and surrounding tissues. Due to developments in medical engineering technology, computed tomography (CT) now plays a critical role in providing the clear images required for adequate assessment prior to third molar surgery. Removal of the maxillary third molar is associated with a risk for maxillary sinus perforation, whereas removal of the mandibular third molar can put patients at risk for a neurosensory deficit from damage to the lingual nerve or inferior alveolar nerve. Multiple factors, including demographic, anatomic, and treatment-related factors, influence the incidence of nerve injury during or following removal of the third molar. CT assessment of the third molar prior to surgery can identify some of these risk factors, such as the absence of cortication between the mandibular third molar and the inferior alveolar canal, prior to surgery to reduce the risk for nerve damage. This topic highlight presents an overview of the clinical significance of CT assessment in third molar surgery. PMID:25071882

  13. Root growth during molar eruption in extant great apes.

    PubMed

    Kelley, Jay; Dean, Christopher; Ross, Sasha

    2009-01-01

    While there is gradually accumulating knowledge about molar crown formation and the timing of molar eruption in extant great apes, very little is known about root formation during the eruption process. We measured mandibular first and second molar root lengths in extant great ape osteological specimens that died while either the first or second molars were in the process of erupting. For most specimens, teeth were removed so that root lengths could be measured directly. When this was not possible, roots were measured radiographically. We were particularly interested in the variation in the lengths of first molar roots near the point of gingival emergence, so specimens were divided into early, middle and late phases of eruption based on the number of cusps that showed protein staining, with one or two cusps stained equated with immediate post-gingival emergence. For first molars at this stage, Gorilla has the longest roots, followed by Pongo and Pan. Variation in first molar mesial root lengths at this stage in Gorilla and Pan, which comprise the largest samples, is relatively low and represents no more than a few months of growth in both taxa. Knowledge of root length at first molar emergence permits an assessment of the contribution of root growth toward differences between great apes and humans in the age at first molar emergence. Root growth makes up a greater percentage of the time between birth and first molar emergence in humans than it does in any of the great apes.

  14. Bilateral maxillary fused second and third molars: a rare occurrence

    PubMed Central

    Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

    2012-01-01

    This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months. PMID:23222992

  15. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Excess Income. 236.60 Section 236... § 236.60 Excess Income. (a) Definition. Excess Income consists of cash collected as rent from the... Rent. The unit-by-unit requirement necessitates that, if a unit has Excess Income, the Excess...

  16. Economic and health implications of routine CBCT examination before surgical removal of the mandibular third molar in the Danish population

    PubMed Central

    Olsen, K R; Matzen, L H; Vaeth, M; Wenzel, A

    2015-01-01

    Objectives: This epidemiological study aimed to analyse economical and societal consequences in Denmark if CBCT is used routinely as a diagnostic method before removal of the mandibular third molar. Furthermore, the aim was to calculate the excess cancer incidence from this practice. Methods: 17 representative dental clinics in the regions of Denmark were visited by two observers, who registered the total number of patients in each clinic, the number of removed mandibular third molars from patients' files together with the age and gender of these patients. The data were collected from 2008 to 2014. The total number of removed mandibular third molars in Denmark each year was derived from the collected data and information on patients' contacts with dentists from Statistics Denmark as a sum of contributions from each region. The contribution of a region was obtained as the number of removed mandibular third molars in the selected clinics in the region times the ratio of the number of patients in the selected clinics in the region to the total number of patients with contact to a general practitioner in the region in 2011. Existing knowledge on the costs for panoramic and CBCT imaging was used to calculate total costs. The cancer incidence was calculated from lifetime attributable risk curves based on linear risk assumptions. Results: The selected clinics included 109,686 patients, and 1369 mandibular third molars had been surgically removed. Using data from Statistics Denmark gave an estimated annual number of removed mandibular third molars of 36,882 at a total cost of €6,633,400. The additional cancer incidence was estimated to be approximately 0.46 per year. Conclusions: The data should be used in a cost-effectiveness analysis of the clinical efficacy of CBCT imaging before removal of mandibular third molars. PMID:25785820

  17. Calculating excess volumes of binary solutions with allowance for structural differences between mixed components

    NASA Astrophysics Data System (ADS)

    Balankina, E. S.

    2016-06-01

    Analytical dependences of a volume's properties on the differences between the geometric structures of initial monosystems are obtained for binary systems simulated by a grain medium. The effect of microstructural parameter k (the ratio of volumes of molecules of mixed components) on the concentration behavior of the relative excess molar volume of different types of real binary solutions is analyzed. It is established that the contribution due to differences between the volumes of molecules and coefficients of the packing density of mixed components is ~80-100% for mutual solutions of n-alkanes and ~55-80% of the experimental value of the relative excess molar volume for water solutions of n-alcohols.

  18. Molar mass distribution and solubility modeling of asphaltenes

    SciTech Connect

    Yarranton, H.W.; Masliyah, J.H.

    1996-12-01

    Attempts to model asphaltene solubility with Scatchard-Hildebrand theory were hampered by uncertainty in molar volume and solubility parameter distribution within the asphaltenes. By considering asphaltenes as a series of polyaromatic hydrocarbons with randomly distributed associated functional groups, molar volume and solubility parameter distributions are calculated from experimental measurements of molar mass and density. The molar mass distribution of Athabasca asphaltenes is determined from interfacial tension and vapor pressure osmometry measurements together with plasma desorption mass spectrometry determinations from the literature. Asphaltene densities are calculated indirectly from mixtures of known concentration of asphaltene in toluene. Asphaltene density, molar volume, and solubility parameter are correlated with molar mass. Solid-liquid equilibrium calculations based on solubility theory and the asphaltene property correlations successfully predict experimental data for both the precipitation point and the amount of precipitated asphaltenes in toluene-hexane solvent mixtures.

  19. Displacement of maxillary third molar into the lateral pharyngeal space.

    PubMed

    Lee, Doksa; Ishii, Syoichiro; Yakushiji, Noboru

    2013-10-01

    Iatrogenic tooth displacement is a rare complication during extraction of impacted molars, but displacement of a maxillary third molar into the maxillary sinus, infratemporal fossa, buccal space, pterygomandibular space, and lateral pharyngeal space has been reported. Currently, 6 published reports describe third molar displacement into the lateral pharyngeal space, only 1 of which involved the loss of a maxillary third molar into this area, which occurred after an attempted self-extraction by the patient. There have been no reported cases of iatrogenic displacement of the maxillary third molar during an extraction procedure. This article describes the recovery, under general anesthesia, of a maxillary third molar from the lateral pharyngeal space after an iatrogenic displacement.

  20. Excessive or unwanted hair in women

    MedlinePlus

    Hypertrichosis; Hirsutism; Hair - excessive (women); Excessive hair in women; Hair - women - excessive or unwanted ... Women normally produce low levels of male hormones (androgens). If your body makes too much of this ...

  1. Unusal canal configuration in maxillary and mandibular second molars

    PubMed Central

    Ragunathan, Ramachandran; Ebenezar, A. V. Rajesh; Mohan, Ajit George; Anand, S.

    2016-01-01

    This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual. PMID:27829778

  2. Light and Excess Manganese1

    PubMed Central

    González, Alonso; Steffen, Kenneth L.; Lynch, Jonathan P.

    1998-01-01

    The effect of light intensity on antioxidants, antioxidant enzymes, and chlorophyll content was studied in common bean (Phaseolus vulgaris L.) exposed to excess Mn. Leaves of bean genotypes contrasting in Mn tolerance were exposed to two different light intensities and to excess Mn; light was controlled by shading a leaflet with filter paper. After 5 d of Mn treatment ascorbate was depleted by 45% in leaves of the Mn-sensitive genotype ZPV-292 and by 20% in the Mn-tolerant genotype CALIMA. Nonprotein sulfhydryl groups and glutathione reductase were not affected by Mn or light treatment. Ten days of Mn-toxicity stress increased leaf ascorbate peroxidase activity of cv ZPV-292 by 78% in low light and by 235% in high light, and superoxide dismutase activity followed a similar trend. Increases of ascorbate peroxidase and superoxide dismutase activity observed in cv CALIMA were lower than those observed in the susceptible cv ZPV-292. The cv CALIMA had less ascorbate oxidation under excess Mn-toxicity stress. Depletion of ascorbate occurred before the onset of chlorosis in Mn-stressed plants, especially in cv ZPV-292. Lipid peroxidation was not detected in floating leaf discs of mature leaves exposed to excess Mn. Our results suggest that Mn toxicity may be mediated by oxidative stress, and that the tolerant genotype may maintain higher ascorbate levels under stress than the sensitive genotype. PMID:9765534

  3. Excessive masturbation after epilepsy surgery.

    PubMed

    Ozmen, Mine; Erdogan, Ayten; Duvenci, Sirin; Ozyurt, Emin; Ozkara, Cigdem

    2004-02-01

    Sexual behavior changes as well as depression, anxiety, and organic mood/personality disorders have been reported in temporal lobe epilepsy (TLE) patients before and after epilepsy surgery. The authors describe a 14-year-old girl with symptoms of excessive masturbation in inappropriate places, social withdrawal, irritability, aggressive behavior, and crying spells after selective amygdalohippocampectomy for medically intractable TLE with hippocampal sclerosis. Since the family members felt extremely embarrassed, they were upset and angry with the patient which, in turn, increased her depressive symptoms. Both her excessive masturbation behavior and depressive symptoms remitted within 2 months of psychoeducative intervention and treatment with citalopram 20mg/day. Excessive masturbation is proposed to be related to the psychosocial changes due to seizure-free status after surgery as well as other possible mechanisms such as Kluver-Bucy syndrome features and neurophysiologic changes associated with the cessation of epileptic discharges. This case demonstrates that psychiatric problems and sexual changes encountered after epilepsy surgery are possibly multifactorial and in adolescence hypersexuality may be manifested as excessive masturbation behavior.

  4. OUTFLOWS IN SODIUM EXCESS OBJECTS

    SciTech Connect

    Park, Jongwon; Yi, Sukyoung K.; Jeong, Hyunjin

    2015-08-10

    Van Dokkum and Conroy revisited the unexpectedly strong Na i lines at 8200 Å found in some giant elliptical galaxies and interpreted them as evidence for an unusually bottom-heavy initial mass function. Jeong et al. later found a large population of galaxies showing equally extraordinary Na D doublet absorption lines at 5900 Å (Na D excess objects: NEOs) and showed that their origins can be different for different types of galaxies. While a Na D excess seems to be related to the interstellar medium (ISM) in late-type galaxies, smooth-looking early-type NEOs show little or no dust extinction and hence no compelling signs of ISM contributions. To further test this finding, we measured the Doppler components in the Na D lines. We hypothesized that the ISM would have a better (albeit not definite) chance of showing a blueshift Doppler departure from the bulk of the stellar population due to outflow caused by either star formation or AGN activities. Many of the late-type NEOs clearly show blueshift in their Na D lines, which is consistent with the former interpretation that the Na D excess found in them is related to gas outflow caused by star formation. On the contrary, smooth-looking early-type NEOs do not show any notable Doppler components, which is also consistent with the interpretation of Jeong et al. that the Na D excess in early-type NEOs is likely not related to ISM activities but is purely stellar in origin.

  5. Molar absorptivity and the blank correction factor.

    PubMed

    Kroll, M H; Elin, R J

    1985-03-01

    In photometry, where both the product formed and one or several reactants absorb light at the same wavelength, the absorbance of the "blank" of the sample at the end of the reaction may be less than that measured at the beginning of the reaction, because of consumption of reactant(s). The blank correction factor for the determined result with one light-absorbing reagent is epsilon P / (epsilon P - epsilon R), where epsilon R and epsilon P are the molar absorptivities of the reagent and the product, respectively. We derived a factor for the case when more than one reagent absorbs light at the same wavelength as the measured product. This factor is independent of the concentration of reagent(s) and can correct the determined result or absorbance for the consumption of light-absorbing reagent(s) during the reaction.

  6. Amoxicillin may cause molar incisor hypomineralization.

    PubMed

    Laisi, S; Ess, A; Sahlberg, C; Arvio, P; Lukinmaa, P-L; Alaluusua, S

    2009-02-01

    The etiology of molar incisor hypomineralization (MIH) is unclear. Our hypothesis was that certain antibiotics cause MIH. We examined 141 schoolchildren for MIH and, from their medical files, recorded the use of antibiotics under the age of 4 yrs. MIH was found in 16.3% of children. MIH was more common among those children who had taken, during the first year of life, amoxicillin (OR=2.06; 95% CI, 1.01-4.17) or the rarely prescribed erythromycin (OR=4.14; 95% CI, 1.05-16.4), compared with children who had not received treatment. Mouse E18 teeth were cultured for 10 days with/without amoxicillin at concentrations of 100 microg/mL-4 mg/mL. Amoxicillin increased enamel but not dentin thickness. An altered pattern of amelogenesis may have interfered with mineralization. We conclude that the early use of amoxicillin is among the causative factors of MIH.

  7. Excess Gibbs free energies at several temperatures of butanone with 1-hexanol or 1-octanol

    SciTech Connect

    Garriga, R.; Sanchez, F.; Perez, P.; Gracia, M.

    1996-09-01

    Vapor pressures of butanone + 1-hexanol or 1-octanol, at several temperatures between 288.15 K and 323.15 K, were measured by a static method. Activity coefficients and excess molar Gibbs free energies G{sup E} were calculated by Barker`s method. Reduction of the vapor pressure data is carried out by means of the Redlich-Kister and Wilson correlations.

  8. Influence of excess diamine on properties of PMR polyimide resins and composites

    NASA Technical Reports Server (NTRS)

    Hurwitz, F. I.

    1980-01-01

    This preliminary study explores the influence of 1-10 percent molar excess MDA on the molecular weight distribution and rheological properties of an imidized PMR system. Molecular weight distribution is characterized by gel permeation chromatography of the imidized molding compound; shear viscosity is related to changes in average molecular weight. The thermo-oxidative stability at 600 F glass transition temperature, flexural and interlaminar shear properties of PMR polyimide/Celion 6000 graphite fiber composites are compared as a function of the percent excess MDA in the monomer reactant mixture.

  9. The Cosmic Ray Electron Excess

    NASA Technical Reports Server (NTRS)

    Chang, J.; Adams, J. H.; Ahn, H. S.; Bashindzhagyan, G. L.; Christl, M.; Ganel, O.; Guzik, T. G.; Isbert, J.; Kim, K. C.; Kuznetsov, E. N.; Panasyuk, M. I.; Panov, A. D.; Schmidt, W. K. H.; Seo, E. S.; Sokolskaya, N. V.; Watts, J. W.; Wefel, J. P.; Wu, J.; Zatsepin, V. I.

    2008-01-01

    This slide presentation reviews the possible sources for the apparent excess of Cosmic Ray Electrons. The presentation reviews the Advanced Thin Ionization Calorimeter (ATIC) instrument, the various parts, how cosmic ray electrons are measured, and shows graphs that review the results of the ATIC instrument measurement. A review of Cosmic Ray Electrons models is explored, along with the source candidates. Scenarios for the excess are reviewed: Supernova remnants (SNR) Pulsar Wind nebulae, or Microquasars. Each of these has some problem that mitigates the argument. The last possibility discussed is Dark Matter. The Anti-Matter Exploration and Light-nuclei Astrophysics (PAMELA) mission is to search for evidence of annihilations of dark matter particles, to search for anti-nuclei, to test cosmic-ray propagation models, and to measure electron and positron spectra. There are slides explaining the results of Pamela and how to compare these with those of the ATIC experiment. Dark matter annihilation is then reviewed, which represent two types of dark matter: Neutralinos, and kaluza-Kline (KK) particles, which are next explained. The future astrophysical measurements, those from GLAST LAT, the Alpha Magnetic Spectrometer (AMS), and HEPCAT are reviewed, in light of assisting in finding an explanation for the observed excess. Also the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) could help by revealing if there are extra dimensions.

  10. Excess carbon in silicon carbide

    NASA Astrophysics Data System (ADS)

    Shen, X.; Oxley, M. P.; Puzyrev, Y.; Tuttle, B. R.; Duscher, G.; Pantelides, S. T.

    2010-12-01

    The application of SiC in electronic devices is currently hindered by low carrier mobility at the SiC/SiO2 interfaces. Recently, it was reported that 4H-SiC/SiO2 interfaces might have a transition layer on the SiC substrate side with C/Si ratio as high as 1.2, suggesting that carbon is injected into the SiC substrate during oxidation or other processing steps. We report finite-temperature quantum molecular dynamics simulations that explore the behavior of excess carbon in SiC. For SiC with 20% excess carbon, we find that, over short time (˜24 ps), carbon atoms bond to each other and form various complexes, while the silicon lattice is largely unperturbed. These results, however, suggest that at macroscopic times scale, C segregation is likely to occur; therefore a transition layer with 20% extra carbon would not be stable. For a dilute distribution of excess carbon, we explore the pairing of carbon interstitials and show that the formation of dicarbon interstitial cluster is kinetically very favorable, which suggests that isolated carbon clusters may exist inside SiC substrate.

  11. 34 CFR 300.16 - Excess costs.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true Excess costs. 300.16 Section 300.16 Education... DISABILITIES General Definitions Used in This Part § 300.16 Excess costs. Excess costs means those costs that... for an example of how excess costs must be calculated.) (Authority: 20 U.S.C. 1401(8))...

  12. 34 CFR 300.16 - Excess costs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Excess costs. 300.16 Section 300.16 Education... DISABILITIES General Definitions Used in This Part § 300.16 Excess costs. Excess costs means those costs that... for an example of how excess costs must be calculated.) (Authority: 20 U.S.C. 1401(8))...

  13. 12 CFR 925.23 - Excess stock.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Excess stock. 925.23 Section 925.23 Banks and... BANKS Stock Requirements § 925.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b) of this section, a member may purchase excess stock as long as the purchase is approved by...

  14. 10 CFR 904.9 - Excess capacity.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF... Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall be entitled to such Excess Capacity to integrate the operation of the Boulder City Area Projects and...

  15. Toward the Unification of Molecular and Molar Analyses

    PubMed Central

    2013-01-01

    Three categories of behavior analysis may be called molecular, molar, and unified. Molecular analyses focus on how manual shaping segments moment-to-moment behaving into new, unified, hierarchically organized patterns. Manual shaping is largely atheoretical, qualitative, and practical. Molar analyses aggregate behaviors and then compute a numerical average for the aggregate. Typical molar analyses involve average rate of, or average time allocated to, the aggregated behaviors. Some molar analyses have no known relation to any behavior stream. Molar analyses are usually quantitative and often theoretical. Unified analyses combine automated shaping of moment-to-moment behaving and molar aggregates of the shaped patterns. Unified controlling relations suggest that molar controlling relations like matching confound shaping and strengthening effects of reinforcement. If a molecular analysis is about how reinforcement organizes individual behavior moment by moment, and a molar analysis is about how reinforcement encourages more or less of an activity aggregated over time, then a unified analysis handles both kinds of analyses. Only theories engendered by computer simulation appear to be able to unify all three categories of behavior analysis. PMID:28018041

  16. Mandibular First Molar with a Single Root and Single Canal

    PubMed Central

    Sooriaprakas, Chandrasekaran; Ballal, Suma; Velmurugan, Natanasabapathy

    2014-01-01

    Successful endodontic management of mandibular first molar with a single root and single canal is diagnosed with the aid of dental operating microscope and multiple angled radiographs. In addition all the mandibular molars and premolars were single rooted on either side. PMID:24715990

  17. Molar incisor hypomineralisation: clinical management of the young patient.

    PubMed

    Daly, Dympna; Waldron, J M

    2009-01-01

    Molar incisor hypomineralisation (MIH) is a common developmental condition resulting in enamel defects in first permanent molars and permanent incisors. It presents at eruption of these teeth. Early diagnosis is essential since rapid breakdown of tooth structure may occur, giving rise to acute symptoms and complicated treatment. The purpose of this article is to review MIH and illustrate its clinical management in young children.

  18. Pulpotomies with Portland cement in human primary molars.

    PubMed

    Conti, Taísa Regina; Sakai, Vivien Thiemy; Fornetti, Ana Paula Camolese; Moretti, Ana Beatriz Silveira; Oliveira, Thais Marchini; Lourenço Neto, Natalino; Machado, Maria Aparecida Andrade Moreira; Abdo, Ruy Cesar Camargo

    2009-01-01

    Two clinical cases in which Portland cement (PC) was applied as a medicament after pulpotomy of mandibular primary molars in children are presented. Pulpotomy using PC was carried out in two mandibular first molars and one mandibular second molar, which were further followed-up. At the 3, 6 and 12-month follow-up appointments, clinical and radiographic examinations of the pulpotomized teeth and their periradicular area revealed that the treatments were successful in maintaining the teeth asymptomatic and preserving pulpal vitality. Additionally, the formation of a dentin bridge immediately below the PC could be observed in the three molars treated. PC may be considered as an effective alternative for primary molar pulpotomies, at least in a short-term period. Randomized clinical trials with human teeth are required in order to determine the suitability of PC before unlimited clinical use can be recommended.

  19. [Molar incisor hypomineralisation in the first permanent teeth].

    PubMed

    Ivanović, Mirjana; Zivojinović, Vesna; Sindolić, Mirjana; Marković, Dejan

    2007-01-01

    The aim of this study was to point out the prevalence of hypomineralised molars and incisors and emphasize importance of this condition in paediatric dentistry. This condition is defined as hypomineralisation of one or more first permanent molars frequently affecting incisors and referred to as molar incisor hypomineralisation (MIH). Aetiology of MIH has not been fully clarified and numerous aetiological factors have been cited. Hypomineralised molars are more prone to caries, cause severe restorative problems and are frequently extracted due to serious damage and caries complications. Incisors can present demarcated enamel opacities, while enamel breakdown is uncommon. Considering the fact that permanent first molars with severe defects demand complex treatment, they represent a serious problem for the patient as well as for the dentist.

  20. Pulp size in molars: underestimation on radiographs.

    PubMed

    Chandler, N P; Ford, T R Pitt; Monteith, B D

    2004-08-01

    The aim was to determine whether radiographs provide a clinically useful indication of pulp size in diseased/restored human first molar teeth, and to investigate accessibility of pulp tissue for diagnostic testing using laser Doppler flowmetry (LDF). Extracted teeth of known age were collected. Restorative materials were removed and teeth with evidence of pulp exposures excluded. Fifty-six teeth were radiographed from buccal and mesial aspects, and then their crowns were sectioned axiobuccolingually and photographed. Images were digitally scanned and measurements made of the total pulp area (above a line across the most superior part of the pulpal floor) and the pulp area in the clinical crown (superior to a line between the amelocemental junctions). The pulp width at the cervix and the highest point of the pulp were also recorded. Data were analysed using Pearson correlations. Pulp areas within the clinical crowns were significantly larger than indicated by radiographs, by 23% in the case of the clinically attainable buccal view (P < 0.05). Pulps may be more accessible to flowmeter testing than they appear. Absence of pulp tissues in the crown was recorded in equal numbers of teeth on radiographs and sections, but with agreement for only one tooth. Sixteen per cent of the teeth had no pulp area in the clinical crown when sectioned, but might still be suitable for testing using LDF.

  1. Eruption of third permanent molars after the extraction of second permanent molars. Part 2: Functional occlusion and periodontal status.

    PubMed

    Orton-Gibbs, S; Orton, S; Orton, H

    2001-03-01

    Functional occlusion and periodontal health were investigated after orthodontic treatment that involved extraction of second molars and after eruption of the third molars in 37 patients (25 female, 12 male). The mean age was 21 years 9 months (range, 16 years 1 month-30 years 5 months). The third permanent molars invariably erupted into a position that maintained good functional occlusion. Sixty-three percent of patients had canine guidance in lateral excursion; the remainder of patients had satisfactory group function. There were only 2 non-working side interferences in the sample, 1 from a recently erupted mandibular third molar. The periodontal health of the sample was generally excellent. Plaque score and bleeding on probing was very low (1.7% of sites). Periodontal health around both maxillary and mandibular teeth was extremely good. When attachment loss was assessed, 2238 of 2240 sites were clinically healthy. One patient, who had generally poor oral hygiene, had a 4-mm probing depth interproximally on the maxillary first and third molar contact. There was no correlation between periodontal health and mandibular third molar position. Therefore, both functional occlusion and periodontal health in the sample were good after loss of second permanent molars and eruption of the third molars.

  2. Interspecific and intraspecific variation in selenium:mercury molar ratios in saltwater fish from the Aleutians: potential protection on mercury toxicity by selenium.

    PubMed

    Burger, Joanna; Gochfeld, Michael; Jeitner, Christian; Donio, Mark; Pittfield, Taryn

    2012-08-01

    A number of factors affect the consumption risk from mercury in fish, including mercury levels, seasonal patterns of mercury concentrations, human consumption patterns, and sensitive populations (e.g. pregnant women, fetuses, young children, and yet unknown genetic factors). Recently the protective effects of selenium on methylmercury toxicity have been publicized, particularly for saltwater fish. We examine levels of mercury and selenium in several species of fish and seabirds from the Aleutians (Alaska), determine selenium:mercury molar ratios, and examine species-specific and individual variation in the ratios as a means of exploring the use of the ratio in risk assessment and risk management. Variation among species was similar for mercury and selenium. There was significant interspecific and intraspecific variation in selenium:mercury molar ratios for fish, and for birds. The mean selenium:mercury molar ratios for all fish and bird species were above 1, meaning there was an excess of selenium relative to mercury. It has been suggested that an excess of selenium confers some protective advantage for salt water fish, although the degree of excess necessary is unclear. The selenium:mercury molar ratio was significantly correlated negatively with total length for most fish species, but not for dolly varden. Some individuals of Pacific cod, yellow irish lord, rock greenling, Pacific halibut, dolly varden, and to a lesser extent, flathead sole, had selenium:mercury ratios below 1. No bird muscle had an excess of mercury (ratio below 1), and only glaucous-winged gull and pigeon guillemot had ratios between 1 and 5. There was a great deal of variation in selenium:mercury molar ratios within fish species, and within bird species, making it difficult and impractical to use these ratios in risk assessment or management, for fish advisories, or for consumers, particularly given the difficulty of interpreting the ratios.

  3. Evaluation by dental cone-beam computed tomography of the incidence and sites of branches of the inferior dental canal that supply mandibular third molars.

    PubMed

    Ogawa, A; Fukuta, Y; Nakasato, H; Nakasato, S

    2016-12-01

    Our aim was to assess the incidence and anatomical site of branches of the inferior dental canal that supply mandibular third molars using dental cone-beam computed tomography (CT). We evaluated the incidence and diameter of branches of the inferior dental canal using 272 cone-beam CT mandibular scans from 172 patients referred for imaging before the extraction of impacted mandibular third molars. We found three typical branching patterns from the inferior dental canal in the third molar region: the retromolar canal (in the retromolar triangle), the dental canal (that courses directly beneath the socket of the third molar), and the accessory canal (that courses through the socket and leads from the inferior dental canal to a bony ridge). The incidences of retromolar, dental, and accessory canals were 75 (28%), 223 (82%), and 21 (8%), respectively, with mean diameters of 0.9 (0.4), 0.7 (0.5), and 1.1 (0.4) mm, respectively. Operative injury to the neurovascular contents within the branches of the inferior dental canal can lead to excessive bleeding and postoperative paraesthesia, so identification of its branches on preoperative cone-beam CT images may prove useful during extraction of impacted mandibular third molars or when harvesting bone blocks from the region of mandibular third molars. We also describe two cases of branches detected on panoramic and cone-beam CT images that prompted this research.

  4. Excess deferred taxes: an update

    SciTech Connect

    Howe, S.

    1985-04-04

    The states originally split on whether to accelerate refunds to customers for overpaid taxes resulting from the decrease in corporate income taxes, but recent regulatory decisions favor a quick payback of excess deferred taxes. The Internal Revenue Service (IRS) indicates that this may violate normalization rules for accounting and threaten the utility's eligibility for accelerated depreciation deductions. After reviewing the positions of the IRS, state commissions, and the courts, the author concludes that the debate will continue until the Treasury Department issues definitive regulations. 1 table.

  5. Periodontal tissue reaction during orthodontic relapse in rat molars.

    PubMed

    Franzen, Tanya J; Brudvik, Pongsri; Vandevska-Radunovic, Vaska

    2013-04-01

    Relapse after orthodontic tooth movement (OTM) is an undesirable outcome that involves a number of factors. This study investigated the remodelling of the alveolar bone and related periodontal structures during orthodontic relapse in rat molars. The maxillary right first molars of 35 Wistar rats were moved mesially by a fixed orthodontic appliance for 10 days and the contralateral molars served as controls. The appliances were removed and six animals killed. The molars were allowed to relapse, and the remaining animals were sacrificed at 1, 3, 5, 7, 14, and 21 days. The jaws were sectioned and stained with haematoxylin and eosin and tartrate-resistant acid phosphatase (TRAP). One day after appliance removal, the molars relapsed to a mean 62.5 per cent of the achieved OTM and then steadily relapsed to 86.1 per cent at 21 days. The number of osteoclasts situated along the alveolar bone of the first molars was highest at the end of active treatment and significantly decreased during the relapse period. In the OTM group, osteoclasts were most numerous in the pressure side of the periodontal ligament (PDL). As the molars relapsed over time, the osteoclast distribution shifted, and after 7 days of relapse, TRAP-positive cells were registered in previous pressure and tension sides of the first molars. After 21 days, these cells were concentrated in the distal parts of the PDL of all three maxillary right molars. These results indicate that orthodontic relapse in the rat model occurs rapidly and remodelling of the alveolar bone and PDL plays a central role in the relapse processes of both actively moved and adjacent teeth.

  6. Revascularization/Regeneration performed in immature molars: case reports.

    PubMed

    Sönmez, I S; Akbay Oba, A; Erkmen Almaz, M

    2013-01-01

    These 3 case reports the outcome of revascularization treatment in necrotic immature molars. During treatment, a tri antibiotic mix was used to disinfect the pulp for 2 weeks. Then a blood clot was created in the canal, over which mineral trioxide aggregate was placed. After 24 months, the immature molars showed continuation of root development. The patients were asymptomatic, no sinus tracts were evident and apical periodontitis was resolved Results from these cases show that revascularization/regeneration using 3Mix-MP method could be effective for managing immature permanent molar teeth with pulpal necrosis.

  7. Molar heat capacity and entropy of calcium metal

    USGS Publications Warehouse

    Hemingway, B.S.; Robie, R.A.; Chase, M.W.

    1997-01-01

    The heat capacity of calcium has been measured at 85 mean temperatures between T ??? 8 K and T ??? 369 K using an adiabatically-shielded calorimeter in an intermittent heating mode. At T = 298.15 K, the recommended values for the molar heat capacity, molar entropy, and molar enthalpy increment referred to T = 0 are (25.77 ?? 0.08) J??K-1??mol-1, (42.90 ?? 0.11) J??K-1??mol-1, and (5811 ?? 12) J??mol-1, respectively. The uncertainties are twice the standard deviation of the mean. ?? 1997 Academic Press Limited.

  8. Crown dimensions of the maxillary molars in Tupaia glis.

    PubMed

    Kondo, S; Hanamura, H; Wakatsuki, E

    1994-03-01

    The crown dimensions of the maxillary molars in Tupaia glis were measured, and the most common molar size sequence was M1 > M2 > M3. The M2 and M3 molars were smaller than the M1 in the mesiodistal crown diameters. With regard to the buccolingual diameters, the distal part of M1 and mesial part of M2 were relatively larger and less variable in size. This stable area corresponded to the inflection point of the maxillary arch curve. These results could be explained from a functional morphological standpoint.

  9. Excess parameters for binary mixtures of ethyl benzoate with 1-propanol, 1-butanol and 1-pentanol at T=303, 308, 313, 318, and 323 K

    NASA Astrophysics Data System (ADS)

    Sreehari Sastry, S.; Babu, Shaik; Vishwam, T.; Parvateesam, K.; Sie Tiong, Ha.

    2013-07-01

    Various thermo-acoustic parameters, such as excess isentropic compressibility (KsE), excess molar volume (VE), excess free length (LfE), excess Gibb's free energy (ΔG*E), and excess Enthalpy (HE), have been calculated from the experimentally determined data of density, viscosity and speed of sound for the binary mixtures of ethyl benzoate+1-propanol, or +1-butanol, or +1-pentanol over the entire range of composition at different temperatures (303, 308, 313, 318 and 323 K). The excess functions have been fitted to the Redlich-Kister type polynomial equation. The deviations for excess thermo-acoustic parameters have been explained on the basis of the intermolecular interactions present in these binary mixtures.

  10. The effect of sutureless wound closure on postoperative pain and swelling after impacted mandibular third molar surgery.

    PubMed

    Hashemi, Hamid Mahmood; Beshkar, Majid; Aghajani, Reihaneh

    2012-04-01

    Our aim was to assess the influence of sutureless and multiple-suture closure of wounds on postoperative complications after extraction of bilateral, impacted, mandibular third molars in 30 patients in a split mouth study. After the teeth had been removed, on one side the flap was replaced but with no suture to hold it in place (study side), and on the other side the wound was closed primarily with three sutures (control side). Recorded complications included pain, swelling, bleeding, and formation of periodontal pockets. The results showed that patients had significantly less postoperative pain and swelling when no sutures were used (p=0.005). There were no signs of excessive bleeding or oozing postoperatively on either side. Six months postoperatively there was no significant difference in the depth of the periodontal pocket around the second molar.

  11. A three-dimensional finite element analysis of molar distalization with a palatal plate, pendulum, and headgear according to molar eruption stage

    PubMed Central

    Kang, Ju-Man; Park, Jae Hyun; Bayome, Mohamed; Oh, Moonbee; Park, Chong Ook; Mo, Sung-Seo

    2016-01-01

    Objective This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization. PMID:27668192

  12. The effects of excessive humidity.

    PubMed

    Williams, R B

    1998-06-01

    Humidification devices and techniques can expose the airway mucosa to a wide range of gas temperatures and humidities, some of which are excessive and may cause injury. Humidified gas is a carrier of both water and energy. The volume of water in the gas stream depends on whether the water is in a molecular form (vapor), particulate form (aerosol), or bulk form (liquid). The energy content of gas stream is the sum of the sensible heat (temperature) of the air and any water droplets in it and the heat of vaporization (latent energy) of any water vapor present. Latent heat energy is much larger than sensible heat energy, so saturated air contains much more energy than dry air. Thus every breath contains a water volume and energy (thermal) challenge to the airway mucosa. When the challenge exceeds the homeostatic mechanisms airway dysfunction begins, starting at the cellular and secretion level and progressing to whole airway function. A large challenge will result in quick progression of dysfunction. Early dysfunction is generally reversible, however, so large challenges with short exposure times may not cause irreversible injury. The mechanisms of airway injury owing to excess water are not well studied. The observation of its effects lends itself to some general conclusions, however. Alterations in the ventilation-perfusion ratio, decrease in vital capacity and compilance, and atelectasis are suggestive of partial or full occlusion of small airways. Changes in surface tension and alveolar-arterial oxygen gradient are consistent with flooding of alveoli. There also may be osmotic challenges to mucosal cell function as evidenced by the different reaction rates with hyper- and hypotonic saline. The reaction to nonisotonic saline also may partly explain increases in specific airway resistance. Aerosolized water and instilled water may be hazardous because of their demonstrated potential for delivering excessive water to the airway. Their use for airway humidification or

  13. Caries Management Strategies for Primary Molars

    PubMed Central

    Santamaria, R.M.; Innes, N.P.T.; Machiulskiene, V.; Evans, D.J.P.; Splieth, C.H.

    2014-01-01

    Minimal invasive approaches to managing caries, such as partial caries removal techniques, are showing increasing evidence of improved outcomes over the conventional complete caries removal. There is also increasing interest in techniques where no caries is removed. We present the 1-yr results of clinical efficacy for 3 caries management options for occlusoproximal cavitated lesions in primary molars: conventional restorations (CR; complete caries removal and compomer restoration), Hall technique (HT; no caries removal, sealing in with stainless steel crowns), and nonrestorative caries treatment (NRCT; no caries removal, opening up the cavity, teaching brushing and fluoride application). In sum, 169 children (3-8 yr old; mean, 5.56 ± 1.45 yr) were enrolled in this secondary care–based, 3-arm, parallel-group, randomized clinical trial. Treatments were carried out by specialist pediatric dentists or postgraduate trainees. One lesion per child received CR, HT, or NRCT. Outcome measures were clinical failure rates, grouped as minor failure (restoration loss/need for replacement, reversible pulpitis, caries progression, etc.) and major failure (irreversible pulpitis, abscess, etc.). There were 148 children (87.6%) with a minimum follow-up of 11 mo (mean, 12.23 ± 0.98 mo). Twenty teeth were recorded as having at least 1 minor failure: NRCT, n = 8 (5%); CR, n = 11 (7%); HT, n = 1 (1%) (p = .002, 95% CI = 0.001 to 0.003). Only the comparison between NRCT and CR showed no significant difference (p = .79, 95% CI = 0.78 to 0.80). Nine (6%) experienced at least 1 major failure: NRCT, n = 4 (2%); CR, n = 5 (3%); HT, n = 0 (0%) (p = .002, 95% CI = 0.001 to 0.003). Individual comparison of NRCT and CR showed no statistically significant difference in major failures (p = .75, 95% CI = 0.73 to 0.76). Success and failure rates were not significantly affected by pediatric dentists’ level of experience (p = .13, 95% CI = 0.12 to 0.14). The HT was significantly more successful

  14. Determining Molar Combining Ratios Using Radioisotopes--A Student Experiment

    ERIC Educational Resources Information Center

    Sears, Jerry A.

    1976-01-01

    Outlines an experimental procedure in which an iodine radioisotope is used to determine molar combining ratios of lead and silver with the iodine. Tables and graphs show the definitive results that should be attainable. (CP)

  15. On the Etiology of Molar-Incisor Hypomineralization.

    PubMed

    Vieira, Alexandre R; Kup, Elaine

    Molar-incisor hypomineralization (MIH) is a condition that is defined based on its peculiar clinical presentation. Reports on the etiology of the condition and possible risk factors are inconclusive and the original suggestion that MIH is an idiopathic condition is often cited. Our group was the first to suggest MIH has a genetic component that involves genetic variation in genes expressed during dental enamel formation. In this report, we provide a rationale to explain the preferential affection of molars and incisors. We suggest that MIH is a genetic condition based on its prevalence, which varies depending on the geographic location, and the evidence that on occasion second primary molars, permanent canines, and premolars can show signs of hypomineralization of enamel when molars and incisors are affected.

  16. Molar incisor hypomineralization (MIH): clinical presentation, aetiology and management.

    PubMed

    Weerheijm, K L

    2004-01-01

    In this paper, the current knowledge about Molar Incisor Hypomineralization (MIH) is presented. MIH is defined as hypomineralization of systemic origin of one to four permanent first molars frequently associated with affected incisors and these molars are related to major clinical problems in severe cases. At the moment, only limited data are available to describe the magnitude of the phenomenon. The prevalence of MIH in the different studies ranges from 3.6-25% and seems to differ in certain regions and birth cohorts. Several aetiological factors (for example, frequent childhood diseases) are mentioned as the cause of the defect. Children at risk should be monitored very carefully during the period of eruption of their first permanent molars. Treatment planning should consider the long-term prognosis of these teeth.

  17. Cementoblastoma Relating to Right Mandibular Second Primary Molar

    PubMed Central

    Manepalli, Swapna; Mohapatra, Abinash

    2016-01-01

    Cementoblastoma is a benign lesion of the odontogenic ectomesenchymal origin. It rarely occurs in primary dentition. This report describes a case of a cementoblastoma relating to the right mandibular second primary molar in a 7-year-old girl. Her panoramic radiograph revealed a well-defined radiopaque lesion with a radiolucent border extending from the distal surface of the mandibular right first primary molar to the distal surface of mandibular second primary molar. The tumor was attached to the mesial root of primary second molar and was excised along with the teeth involved and sent for histopathological evaluation, which showed irregular trabeculae of mineralized tissue interspersed with fibrovascular connective tissue, trabeculae of mineralized tissue with prominent reversal lines, and peripheral rimming of the mineralized tissue with blast cells. On a six-month follow-up, there has been no recurrence of the lesion. PMID:27738532

  18. 10 CFR 904.10 - Excess energy.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be...

  19. 10 CFR 904.10 - Excess energy.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be...

  20. 7 CFR 945.44 - Excess funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess funds. 945.44 Section 945.44 Agriculture... Assessments § 945.44 Excess funds. (a) The funds remaining at the end of a fiscal period which are in excess... amount not to exceed approximately one fiscal period's budgeted expenses. Funds in such reserve shall...

  1. 12 CFR 1263.23 - Excess stock.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Excess stock. 1263.23 Section 1263.23 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS MEMBERS OF THE BANKS Stock Requirements § 1263.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b) of...

  2. 12 CFR 1263.23 - Excess stock.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Excess stock. 1263.23 Section 1263.23 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS MEMBERS OF THE BANKS Stock Requirements § 1263.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b) of...

  3. 12 CFR 1263.23 - Excess stock.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Excess stock. 1263.23 Section 1263.23 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS MEMBERS OF THE BANKS Stock Requirements § 1263.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b)...

  4. 12 CFR 1263.23 - Excess stock.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Excess stock. 1263.23 Section 1263.23 Banks and Banking FEDERAL HOUSING FINANCE AGENCY FEDERAL HOME LOAN BANKS MEMBERS OF THE BANKS Stock Requirements § 1263.23 Excess stock. (a) Sale of excess stock. Subject to the restriction in paragraph (b) of...

  5. 10 CFR 904.9 - Excess capacity.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall...

  6. 10 CFR 904.9 - Excess capacity.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall...

  7. 10 CFR 904.9 - Excess capacity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall...

  8. 10 CFR 904.9 - Excess capacity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Excess capacity. 904.9 Section 904.9 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.9 Excess capacity. (a) If the Uprating Program results in Excess Capacity, Western shall...

  9. 10 CFR 904.10 - Excess energy.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be...

  10. 10 CFR 904.10 - Excess energy.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be...

  11. 10 CFR 904.10 - Excess energy.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Excess energy. 904.10 Section 904.10 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.10 Excess energy. (a) If excess Energy is determined by the United States to be...

  12. 7 CFR 985.56 - Excess oil.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified...

  13. 7 CFR 985.56 - Excess oil.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified...

  14. 7 CFR 985.56 - Excess oil.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified...

  15. 7 CFR 985.56 - Excess oil.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified...

  16. 7 CFR 985.56 - Excess oil.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess oil. 985.56 Section 985.56 Agriculture... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Order Regulating Handling Volume Limitations § 985.56 Excess oil. Oil of any class in excess of a producer's applicable annual allotment shall be identified...

  17. 43 CFR 426.12 - Excess land.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Excess land. 426.12 Section 426.12 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR ACREAGE LIMITATION RULES AND REGULATIONS § 426.12 Excess land. (a) The process of designating excess...

  18. 43 CFR 426.12 - Excess land.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Excess land. 426.12 Section 426.12 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR ACREAGE LIMITATION RULES AND REGULATIONS § 426.12 Excess land. (a) The process of designating excess...

  19. 43 CFR 426.12 - Excess land.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Excess land. 426.12 Section 426.12 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR ACREAGE LIMITATION RULES AND REGULATIONS § 426.12 Excess land. (a) The process of designating excess...

  20. 43 CFR 426.12 - Excess land.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Excess land. 426.12 Section 426.12 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR ACREAGE LIMITATION RULES AND REGULATIONS § 426.12 Excess land. (a) The process of designating excess...

  1. Influence of molar ratios on properties of magnesium oxychloride cement

    SciTech Connect

    Li Zongjin . E-mail: zongjin@ust.hk; Chau, C.K.

    2007-06-15

    A parametric study has been conducted to investigate the influences of the molar ratios of MgO/MgCl{sub 2} and H{sub 2}O/MgCl{sub 2} on the properties of magnesium oxychloride (MOC) cement. By an integrated assessment of the experimental studies of strength development and X-ray diffractograms, together with application of the relevant phase diagram, it is recognized that the molar ratios of MgO/MgCl{sub 2} and H{sub 2}O/MgCl{sub 2} can significantly affect the properties of MOC cement. For a MOC cement paste possessing a dominance of 5MgO.MgCl{sub 2}.8H{sub 2}O (phase 5) crystals, the molar ratios of MgO/MgCl{sub 2} of 11-17 and H{sub 2}O/MgCl{sub 2} of 12-18 are found to be the most favorite ranges for design purpose. The choose of the molar ratio of H{sub 2}O/MgCl{sub 2} is, however, largely depends on the molar ratio of MgO/MgCl{sub 2} mainly for controlling workability of paste. Therefore, the most critical parameter to be selected in the design process is the molar ratio of MgO/MgCl{sub 2}, although the reactivity of the MgO powder is also important. Besides, the molar ratio can also be affected by the reactivity of the MgO powder to be employed. It is believed that a molar ratio of MgO/MgCl{sub 2} of 13, the most suitable one shown in this study, can be used as a starting point in the normal practice.

  2. Cervicothoracic Subcutaneous Emphysema and Pneumomediastinum After Third Molar Extraction.

    PubMed

    Picard, Maxime; Pham Dang, Nathalie; Mondie, Jean Michel; Barthelemy, Isabelle

    2015-12-01

    Third molar extraction is one of the most common interventions in dental and maxillofacial surgery. Complications are frequent and well documented, with swelling, pain, bleeding, infection, and lingual or alveolar nerve injury being the most common. This report describes a case of subcutaneous extensive emphysema and pneumomediastinum that occurred 4 days after extraction of an impacted right mandibular third molar. The management and etiology of this case and those reported in the literature are discussed.

  3. Treatment of a Maxillary First Molar with Two Palatal Roots

    PubMed Central

    Asghari, Vahideh; Rahimi, Saeed; Ghasemi, Negin; Talebzadeh, Bita; Norlouoni, Ahmad

    2015-01-01

    Thorough knowledge of the morphology and internal anatomy of the root canal system is essential, because it determines the successful outcome of endodontic treatment. The main goal of endodontic treatment is to prevent apical periodontitis and/or to promote the healing of periapical lesion. Presence of two canals or roots on the palatal side of the first maxillary molar has rarely been reported. This case report presents a maxillary first molar with two separate palatal roots. PMID:26523146

  4. An epidemiologic study of deciduous molar relations in preschool children.

    PubMed

    Infante, P F

    1975-01-01

    This study indicated that distoclusion decreased significantly with age and was more prevalent in siblings of children with Class II molar relation as compared with the prevalence for the total population. Children of middle socioeconomic status (SES) and girls with Class I molar relation had prevalences of posterior crossbite significantly greater than lower SES children and boys, respectively. Finger habits were highly associated with posterior crossbite (P less than 0.001).

  5. Prevalence of Taurodont molars in a North Indian population

    PubMed Central

    Bharti, Ramesh; Chandra, Anil; Tikku, Aseem Prakash; Arya, Deeksha

    2015-01-01

    Background: It is very important for dentists to be familiar with anomalies of teeth not only for the clinical complications but also their management. Taurodontism also provides a valuable clue in detecting its association with various syndromes and other systemic conditions. The purpose of this study was to assess the prevalence of Taurodont molars among a North Indian population. Materials and Methods: A total of 1000 patients’ full-mouth periapical radiographs were screened. The radiographs were evaluated under optimal conditions using double magnifying glasses. A total of 7615 molars (including third molars) were evaluated. The relative incidence and the correlations regarding the location of Taurodont teeth (right versus left side and maxillary versus mandibular) were analyzed using the Chi-square test. Results: Twenty-eight patients were found to have a Taurodont molar (11 women and 17 men [P = 0.250]). The prevalence of Taurodont molar was 2.8%. Males had a higher prevalence rate than females (3.4% vs. 2.2%, respectively). A cluster analysis of total Taurodonts in the mandible (45%) versus maxilla (55%) of both males and females combined showed a statistically significant difference (P < 0.05). Conclusion: The occurrence of Taurodontism is basically based on racial expression in different populations. These variations in prevalence between different populations may be due to ethnic variations. The occurrence of Taurodont molars among this Indian population was rare. PMID:25767357

  6. Prediction of maxillary third molar impaction in adolescent orthodontic patients.

    PubMed

    Artun, Jon; Behbehani, Faraj; Thalib, Lukman

    2005-11-01

    The purpose of this study was to identify risk factors for maxillary third molar impaction in adolescent orthodontic patients. Radiographs made before treatment (T1) and after treatment (T2) and at a minimum of 10 years postretention (T3) of 132 patients that allowed accurate diagnosis of impaction vs eruption of one or both maxillary third molars were evaluated. Although univariate logistic regression revealed that the decision to extract premolars reduced the risk of impaction by 76% (P < .01), this parameter was not included in the final prediction model at T1. Multiple logistic regression analyses revealed that third molar impaction could be predicted at T1 according to the size of the retromolar space and the amount of mesial molar movement that will occur during active appliance therapy, reducing the risk of impaction by 22% and 34% for every millimeter increase in distance, respectively (P < .01). At T2, multiple logistic regression revealed that the odds of impaction were more than 60 times higher (P < .01) if the third molar was angulated mesially as compared with less than 30 degrees distally relative to the occlusal plane and almost five times (P < .05) higher if the third molar was angulated more than 30 degrees distally as compared with less than 30 degrees distally. Similar analyses at T2 showed 29% reduced risk of impaction for every millimeter increase in retromolar space and 18% reduced risk for every degree increase in angle MP/SN (P < .01).

  7. Bonded molar tubes: a retrospective evaluation of clinical performance.

    PubMed

    Millett, D T; Hallgren, A; Fornell, A C; Robertson, M

    1999-06-01

    This study investigated time to first failure of stainless steel orthodontic first permanent molar tubes (Ormco Corp) bonded with a light-cured resin adhesive (Transbond) and assessed whether this was related to patient gender, age of the patient at the start of treatment, the presenting malocclusion, or the operator. All first molar tubes were bonded to intact buccal enamel, free of any restoration. Survival analysis was carried out on data from 483 patients with 1190 bonded first molar tubes. For each case, a single molar tube, either that which was first to fail or had the shortest follow-up time, was chosen for analysis. The median time until first bonded tube failure was 699 days with an overall failure rate of 21% recorded. There was no significant difference in time to first failure of molar tubes with respect to patient gender or presenting malocclusion but significant differences were recorded with respect to the patients' age at the start of treatment and the operator. Age at the start of treatment and operator were identified as independently useful predictors of bonded molar tube survival.

  8. Third molar impaction and agenesis: influence on anterior crowding.

    PubMed

    Esan, Temitope; Schepartz, Lynne A

    2017-02-01

    Background Third molar influence on anterior crowding is controversial, but they are assumed to play a major role in compromising dental arch space. Aim To evaluate the relationship among impaction, agenesis and crowding in black South African males. Subjects and method Mandibles and maxillae of 535 black South African males in the Raymond A. Dart Collection of Human Skeletons, University of the Witwatersrand were examined for anterior crowding and third molar agenesis and impaction. Dental crowding was determined using Little's irregularity index. Results Individuals with impaction showed more moderate-to-extreme crowding than those with agenesis. Bilateral third molar presence was more frequently associated with ideal-to-minimal crowding. Weak positive but significant correlations between crowding and impaction were found (mandible, ρ = 0.154, p = 0.000; maxilla ρ = 0.130, p = 0.000). The direction was the opposite for bilateral presence of molars (mandible, ρ = -0.135, p = 0.02; maxilla, ρ = -0.111, p = 0.010). Odds of mandibular crowding were greatest in individuals with impaction (OR = 3.22, CI = 1.716-6.05, p < 0.001). Maxillary results were similar. Conclusion Third molar impaction plays a role in anterior crowding. Third molar presence was not associated with anterior crowding, while agenesis did not explain absence of crowding.

  9. Role of the Molar Volume on Estimated Diffusion Coefficients

    NASA Astrophysics Data System (ADS)

    Santra, Sangeeta; Paul, Aloke

    2015-09-01

    The role of the molar volume on the estimated diffusion parameters has been speculated for decades. The Matano-Boltzmann method was the first to be developed for the estimation of the variation of the interdiffusion coefficients with composition. However, this could be used only when the molar volume varies ideally or remains constant. Although there are no such systems, this method is still being used to consider the ideal variation. More efficient methods were developed by Sauer-Freise, Den Broeder, and Wagner to tackle this problem. However, there is a lack of research indicating the most efficient method. We have shown that Wagner's method is the most suitable one when the molar volume deviates from the ideal value. Similarly, there are two methods for the estimation of the ratio of intrinsic diffusion coefficients at the Kirkendall marker plane proposed by Heumann and van Loo. The Heumann method, like the Matano-Boltzmann method, is suitable to use only when the molar volume varies more or less ideally or remains constant. In most of the real systems, where molar volume deviates from the ideality, it is safe to use the van Loo method. We have shown that the Heumann method introduces large errors even for a very small deviation of the molar volume from the ideal value. On the other hand, the van Loo method is relatively less sensitive to it. Overall, the estimation of the intrinsic diffusion coefficient is more sensitive than the interdiffusion coefficient.

  10. Finite Element Reconstruction of a Mandibular First Molar

    PubMed Central

    Ehsani, Sara; Mirhashemi, Fatemeh Sadat; Asgary, Saeed

    2013-01-01

    Introduction Mandibular first molar is the most important tooth with complicated morphology. In finite element (FE) studies, investigators usually prefer to model anterior teeth with a simple and single straight root; it makes the results deviate from the actual case. The most complicated and time-consuming step in FE studies is modeling of the desired tooth, thus this study was performed to establish a finite element method (FEM) of reconstructing a mandibular first molar with the greatest precision. Materials and Methods An extracted mandibular first molar was digitized, and then radiographed from different aspects to achieve its outer and inner morphology. The solid model of tooth and root canals were constructed according to this data as well as the anatomy of mandibular first molar described in the literature. Result A three-dimensional model of mandibular first molar was created, giving special consideration to shape and root canal system dimensions. Conclusion This model may constitute a basis for investigating the effect of different clinical situations on mandibular first molars in vitro, especially on its root canal system. The method described here seems feasible and reasonably precise foundation for investigations. PMID:23717327

  11. Root canal morphology of South Asian Indian maxillary molar teeth

    PubMed Central

    Singh, Shishir; Pawar, Mansing

    2015-01-01

    Objective: The objective was to study the root canal morphology of South Asian Indian Maxillary molars using a tooth clearing technique. Materials and Methods: Hundred teeth each comprising of first, second, and third molars collected from different dental schools and clinics in India were subjected to standard dye penetration, decalcification and clearing procedure before being studied. Results: The first molar mesiobuccal roots exhibited 69% Type I, 24% Type II, 4% Type IV, 2% Type V, and 1% exhibited a Vertuccis Type VIII canal anatomy. In the group with three separate roots the second molar mesiobuccal roots in exhibited 80.6% Type I, 15.3% Type II, 2.7% Type IV, and 1.4% Type V canal anatomy while the third molars mesiobuccal roots exhibited 57.4% Type I, 32% Type II, 2.1% Type III, 8.5% Type IV, 1% had a Type V canal anatomy in the similar group. Conclusion: A varied root canal anatomy was seen in the mesiobuccal root canal of the maxillary molars. PMID:25713497

  12. Kissing molars extraction: Case series and review of the literature

    PubMed Central

    Arjona-Amo, Manuel; Torres-Carranza, Eusebio; Batista-Cruzado, Antonio; Serrera-Figallo, Maria-Angeles; Crespo-Torres, Santos; Belmonte-Caro, Rodolfo; Albisu-Andrade, Claudio; Gutiérrez-Pérez, José-Luis

    2016-01-01

    Kissing molars are a very rare form of inclusion defined as molars included in the same quadrant, with occlusal surfaces contacting each other within a single dental follicle. We present four cases of this pathology: a 35 year-old male, referred to the Oral and Maxillofacial Surgery Department of the Hospital Virgen del Rocio in Seville, and three females of 24, 26, and 31 years, all of which had kissing molars that were treated by tooth extraction. We have found only 10 cases published in the medical literature in which this type of inclusion is briefly described, none of which elaborate on the surgical technique employed. In these cases, the indication for surgery is established when there is a history of recurring infections or cystic lesions associated with dental inclusions. The extraction of kissing molars requires an exhaustive comprehension of the anatomy of the region involved, sufficiently developed surgical abilities, and an extensive planning process. Key words:Impacted molar, kissing molar, surgical extraction. PMID:26855716

  13. Standardised studies on Molar Incisor Hypomineralisation (MIH) and Hypomineralised Second Primary Molars (HSPM): a need.

    PubMed

    Elfrink, M E C; Ghanim, A; Manton, D J; Weerheijm, K L

    2015-06-01

    In November 2014, a review of literature concerning prevalence data of Molar Incisor Hypomineralisation (MIH) and Hypomineralised Second Primary Molars (HSPM) was performed. A search of PubMed online databases was conducted for relevant articles published until November 2014. The reference lists of all retrieved articles were hand-searched. Studies were included after assessing the eligibility of the full-text article. Out of 1078 manuscripts, a total of 157 English written publications were selected based on title and abstract. Of these 157, 60 were included in the study and allocated as 52 MIH and 5 HSPM, and 3 for both MIH and HSPM. These studies utilised the European Academy of Paediatric Dentistry judgment criteria, the modified index of developmental defects of enamel (mDDE) and self-devised criteria, and demonstrated a wide variation in the reported prevalence (MIH 2.9-44 %; HSPM 0-21.8 %). Most values mentioned were representative for specific areas. More studies were performed in cities compared with rural areas. A great variation was found in calibration methods, number of participants, number of examiners and research protocols between the studies. The majority of the prevalence studies also investigated possible aetiological factors. To compare MIH and HSPM prevalence and or aetiological data around the world, standardisation of such studies seems essential. Standardisation of the research protocol should include a clearly described sample of children (minimum number of 300 for prevalence and 1000 for aetiology studies) and use of the same calibration sets and methods whereas aetiological studies need to be prospective in nature. A standardised protocol for future MIH and HSPM prevalence and aetiology studies is recommended.

  14. Variation in Cuspal Morphology in Maxillary First Permanent Molar with Report of 3 Cusp Molar- A Prevalence Study

    PubMed Central

    2016-01-01

    Introduction Human teeth has always been known for morphological variations in both the crown and root structures. The corono-morphological variations can be in the form of extra cusp or missing cusp. Permanent maxillary first molars are the biggest teeth in maxillary arch and have a high anchorage value and are known for their four cusp and five cusp patterns, if present with cusp of Carebelli. Aim The aim of this study was to determine the prevalence of cuspal variations and quantification of cusps of permanent maxillary first molar in Malwa population. Materials and Methods A total of 1249 individuals were studied at Government College of Dentistry, Indore, Madhya Pradesh, India, to evaluate the number of cusps in permanent maxillary first molars. Results Of the studied 1249 individuals, permanent maxillary first molars had five cusps in 407 (32.6%) cases while 838 (67.08%) cases had four cusp and four (0.32%) cases had three cusps. The four cases having three cusp permanent maxillary first molars were present unilaterally and only in females. Conclusion This article emphasizes the presence of permanent maxillary first molar with only three cusps in the Malwa population of India. It also reviews the literature in respect to this rare anomaly and calls for continuous and close monitoring to report such cases in the future. PMID:27790576

  15. Androgen excess in cystic acne.

    PubMed

    Marynick, S P; Chakmakjian, Z H; McCaffree, D L; Herndon, J H

    1983-04-28

    We measured hormone levels in 59 women and 32 men with longstanding cystic acne resistant to conventional therapy. Affected women had higher serum levels of dehydroepiandrosterone sulfate, testosterone, and luteinizing hormone and lower levels of sex-hormone-binding globulin than controls. Affected men had higher levels of serum dehydroepiandrosterone sulfate and 17-hydroxyprogesterone and lower levels of sex-hormone-binding globulin than controls. To lower dehydroepiandrosterone sulfate, dexamethasone was given to men, and dexamethasone or an oral contraceptive pill, Demulen (or both), was given to women. Of the patients treated for six months, 97 per cent of the women and 81 per cent of the men had resolution or marked improvement in their acne. The dose of dexamethasone required to reduce dehydroepiandrosterone sulfate levels was low, rarely exceeding the equivalent of 20 mg of hydrocortisone per day. We conclude that most patients with therapeutically resistant cystic acne have androgen excess and that lowering elevated dehydroepiandrosterone sulfate results in improvement or remission of acne in most instances.

  16. Erupted complex odontoma delayed eruption of permanent molar.

    PubMed

    Ohtawa, Yumi; Ichinohe, Saori; Kimura, Eri; Hashimoto, Sadamitsu

    2013-01-01

    Odontomas, benign tumors that develop in the jaw, rarely erupt into the oral cavity. We report an erupted odontoma which delayed eruption of the first molar. The patient was a 10-year-old Japanese girl who came to our hospital due to delayed eruption of the right maxillary first molar. All the deciduous teeth had been shed. The second premolar on the right side had erupted, but not the first molar. Slight inflammation of the alveolar mucosa around the first molar had exposed a tooth-like, hard tissue. Panoramic radiography revealed a radiopaque mass indicating a lesion approximately 1 cm in diameter. The border of the image was clear, and part of the mass was situated close to the occlusal surface of the first molar. The root of the maxillary right first molar was only half-developed. A clinical diagnosis of odontoma was made. The odontoma was subsequently extracted, allowing the crown of the first molar to erupt almost 5 months later. The dental germ of the permanent tooth had been displaced by the odontoma. However, after the odontoma had been extracted, the permanent tooth was still able to erupt spontaneously, as eruptive force still remained. When the eruption of a tooth is significantly delayed, we believe that it is necessary to examine the area radiographically. If there is any radiographic evidence of a physical obstruction that might delay eruption, that obstruction should be removed before any problems can arise. Regular dental checkups at schools might improve our ability to detect evidence of delayed eruption earlier.

  17. First molar health status in different craniofacial relationships

    PubMed Central

    Linjawi, Amal I

    2016-01-01

    Objective To investigate the association between the health status of permanent first molars and different craniofacial relationships among adolescents. Study design This is a retrospective study on patients’ records aged 11–15 years. Sex, skeletal relationship, vertical growth pattern, malocclusion, overjet, and overbite were assessed. The health status of permanent first molars was recorded from the orthopantomograms and intraoral photographs as “sound” and “not sound”. Chi-square, Mann–Whitney U and Kruskal–Wallis tests, and Pearson’s correlation coefficient were used to analyze and correlate the assessed variables. Significance level was set at P<0.05. Results A total of 210 records were evaluated; 81 were male, 68 had Class I and 91 had Class II skeletal relationships. More than half of the subjects had normal (n=67) to moderate deep bite (n=72); normal (n=91), moderately increased (n=54), to severely increased (n=50) overjet; and Class I (n=106) and Class II division 1 (n=75) malocclusion. Significant differences were found in the health status of the permanent first molars with respect to sex (P=0.034), vertical growth pattern (P=0.01), and overbite (P=0.047). Strong correlations were only found between the health status of the permanent first molars and the following variables: sex (P=0.036) and vertical growth pattern (P=0.004). Significant correlation was further found between the upper left first molar health status and sex (P=0.019) and the lower right first molar health status and the vertical growth pattern (P=0.001). No significant association was found with the anteroposterior craniofacial relationships (P>0.05). Conclusion Sex difference and vertical growth patterns were found to be potential predictors of the health status of the permanent first molars. No significant association was found with the anteroposterior craniofacial relationships. PMID:27462176

  18. Correct Expressions of Enthalpy of Mixing and Excess Entropy from MIVM and Their Simplified Forms

    NASA Astrophysics Data System (ADS)

    Tao, Dong-Ping

    2016-02-01

    In this work, the author pointed out that empirically to compare the molecular interaction volume model (MIVM) with thermodynamic definition of excess Gibbs energy would result in the incorrect expressions of enthalpy of mixing and excess entropy. The correct expressions of molar and partial molar enthalpies of mixing and excess entropies from the MIVM are consistent thermodynamically and are suggested for replacing their past incorrect ones. The simplification of Z i = Z = 10 is verified to be feasible by the average errors of fitting in the binary liquid alloys M-P (M = Cr, Fe, and Mn) and of predicting in the ternary liquid alloys Fe-Cr-P and Fe-Mn-P by using two coordination numbers of phosphorus Z P = 3.04 and Z P = 8.96. Further, their simplified forms are proposed for predicting easily thermodynamic properties of a multicomponent liquid system and are preliminarily tested to be coordinated mutually in the binary liquid alloys Au-Cu, Cd-Zn, Ca-Zn, and Ni-Pb.

  19. Androgen excess: Investigations and management.

    PubMed

    Lizneva, Daria; Gavrilova-Jordan, Larisa; Walker, Walidah; Azziz, Ricardo

    2016-11-01

    Androgen excess (AE) is a key feature of polycystic ovary syndrome (PCOS) and results in, or contributes to, the clinical phenotype of these patients. Although AE will contribute to the ovulatory and menstrual dysfunction of these patients, the most recognizable sign of AE includes hirsutism, acne, and androgenic alopecia or female pattern hair loss (FPHL). Evaluation includes not only scoring facial and body terminal hair growth using the modified Ferriman-Gallwey method but also recording and possibly scoring acne and alopecia. Moreover, assessment of biochemical hyperandrogenism is necessary, particularly in patients with unclear or absent hirsutism, and will include assessing total and free testosterone (T), and possibly dehydroepiandrosterone sulfate (DHEAS) and androstenedione, although these latter contribute limitedly to the diagnosis. Assessment of T requires use of the highest quality assays available, generally radioimmunoassays with extraction and chromatography or mass spectrometry preceded by liquid or gas chromatography. Management of clinical hyperandrogenism involves primarily either androgen suppression, with a hormonal combination contraceptive, or androgen blockade, as with an androgen receptor blocker or a 5α-reductase inhibitor, or a combination of the two. Medical treatment should be combined with cosmetic treatment including topical eflornithine hydrochloride and short-term (shaving, chemical depilation, plucking, threading, waxing, and bleaching) and long-term (electrolysis, laser therapy, and intense pulse light therapy) cosmetic treatments. Generally, acne responds to therapy relatively rapidly, whereas hirsutism is slower to respond, with improvements observed as early as 3 months, but routinely only after 6 or 8 months of therapy. Finally, FPHL is the slowest to respond to therapy, if it will at all, and it may take 12 to 18 months of therapy for an observable response.

  20. Selenium and mercury molar ratios in commercial fish from New Jersey and Illinois: Variation within species and relevance to risk communication

    PubMed Central

    Burger, Joanna; Gochfeld, Michael

    2015-01-01

    There is an emerging consensus that people consuming large amounts of fish with selenium:mercury ratios below 1 may be at higher risk from mercury toxicity. As the relative amount of selenium increases compared to mercury, risk may be lowered, but it is unclear how much excess selenium is required. It would be useful if the selenium:mercury ratio was relatively consistent within a species, but this has not been the case in our studies of wild-caught fish. Since most people in developed countries and urban areas obtain their fish and other seafood commercially, we examined selenium:mercury molar ratios in commercial fish purchased in stores and fish markets in central New Jersey and Chicago. There was substantial interspecific and intraspecific variation in molar ratios. Across species the selenium:mercury molar ratio decreased with increasing mean mercury levels, but selenium variation also contributed to the ratio. Few samples had selenium:mercury molar ratios below 1, but there was a wide range in ratios, complicating the interpretation for use in risk management and communication. Before ratios can be used in risk management, more information is needed on mercury:selenium interactions and mutual bioavailability, and on the relationship between molar ratios and health outcomes. Further, people who are selenium deficient may be more at risk from mercury toxicity than others. PMID:23541437

  1. 3D imaging reconstruction and impacted third molars: case reports

    PubMed Central

    Tuzi, Andrea; Di Bari, Roberto; Cicconetti, Andrea

    2012-01-01

    Summary There is a debate in the literature about the need for Computed Tomagraphy (CT) before removing third molars, even if positive radiographic signs are present. In few cases, the third molar is so close to the inferior alveolar nerve that its extraction might expose patients to the risk of post-operative neuro-sensitive alterations of the skin and the mucosa of the homolateral lower lip and chin. Thus, the injury of the inferior alveolar nerve may represent a serious, though infrequent, neurologic complication in the surgery of the third molars rendering necessary a careful pre-operative evaluation of their anatomical relationship with the inferior alveolar nerve by means of radiographic imaging techniques. This contribution presents two case reports showing positive radiographic signs, which are the hallmarks of a possible close relationship between the inferior alveolar nerve and the third molars. We aim at better defining the relationship between third molars and the mandibular canal using Dental CT Scan, DICOM image acquisition and 3D reconstruction with a dedicated software. By our study we deduce that 3D images are not indispensable, but they can provide a very agreeable assistance in the most complicated cases. PMID:23386934

  2. Sex discrimination potential of permanent maxillary molar cusp diameters.

    PubMed

    Macaluso, P J

    2010-12-01

    The purpose of the present investigation was to assess the potential usefulness of permanent maxillary molar cusp diameters for sex discrimination of poorly preserved skeletal remains. Cusp diameters were measured from standardized occlusal view photographs in a sample of black South Africans consisting of 130 males and 105 females. Results demonstrated that all cusp dimensions for both first and second maxillary molars exhibited significant sexual dimorphism (p < 0.001). Univariate and multivariate discriminant function equations permitted low to moderate classification accuracy in discriminating sex (58.3%-73.6%). The allocation accuracies for cusp diameter measurements were as high as, and even surpassed, those observed for conventional crown length and breadth dimensions of the same teeth. The most accurate result (73.6%, with a sex bias of only 0.5%) was obtained when all cusp diameters from both maxillary molars were used concurrently. However, only slightly less accurate results (~70.0%) were achieved when selected dimensions from only one of the molars, or even a single cusp, were utilized. Although not as reliable at predicting sex as other skeletal elements in black South Africans, the derived odontometric standards can be used with highly fragmentary skeletal material, as well as immature remains in which crown formation of the maxillary molars is complete.

  3. Mandibular first molar with six root canals: a rare entity

    PubMed Central

    Hasan, Muhammad; Rahman, Munawar; Saad, Najeeb

    2014-01-01

    Recently, there has been an ongoing trend of case reports that highlight the presence of more than four root canals in mandibular first molars. This tendency warns clinicians to be more prudent when dealing with mandibular first molars requiring endodontic treatment. Moreover, radiographic examination should be taken as a clue providing tool rather than as an absolute guide to anatomy and its associated aberrances. This case reports the successful non-surgical endodontic management of a mandibular first molar with six root canal systems with three canals in the mesial root and three in the distal root. The classification of root canal systems found in this case was Sert and Bayirli type XV in both the roots. After non-surgical endodontic treatment, the tooth was restored definitively with a resin composite core followed by porcelain fused to the metal crown. This case adds to the library of previously reported cases of mandibular first molars with six root canals and further emphasises on the importance of rare morphological deviations that may occur in the mandibular first molars. PMID:25082869

  4. Excess noise in tunable diode lasers

    NASA Technical Reports Server (NTRS)

    Rowland, C. W.

    1981-01-01

    The method and the apparatus for identifying excess-noise regions in tunable diode lasers are described. These diode lasers exhibit regions of excess noise as their wavelength is tuned. If a tunable diode laser is to be used as a local oscillator in a superheterodyne optical receiver, these excess-noise regions severely degrade the performance of the receiver. Measurement results for several tunable diode lasers are given. These results indicate that excess noise is not necessarily associated with a particular wavelength, and that it is possible to select temperature and injection current such that the most ideal performance is achieved.

  5. Pendulum Therapy of Molar Distalization in Mixed Dentition

    PubMed Central

    Prakash, Amit; Agarwal, Anshu

    2016-01-01

    ABSTRACT Early and timely pedo-orthodontic treatment is aimed at eliminating the disturbances of skeletal or dentoalveolar development, to harmonize the stomatognathic system before the full eruption of all permanent teeth. The advantages of pendulum appliance are its minimal dependence on patient’s compliance (child cooperation), ease of fabrication, onetime activation and adjustment of the springs if necessary to correct minor transverse and vertical molar positions. This article reports a successful treatment method of class II malocclusion with pendulum appliance in mixed dentition phase. Distalization of maxillary molar was done, followed by guidance of canine impaction orthodontically and other dental correction using 0.022 MBT appliances. Posttreatment results were stable and remarkable. How to cite this article: Patil RU, Prakash A, Agarwal A. Pendulum Therapy of Molar Distalization in Mixed Dentition. Int J Clin Pediatr Dent 2016;9(1):67-73. PMID:27274159

  6. Pendulum Therapy of Molar Distalization in Mixed Dentition.

    PubMed

    Patil, Raju Umaji; Prakash, Amit; Agarwal, Anshu

    2016-01-01

    Early and timely pedo-orthodontic treatment is aimed at eliminating the disturbances of skeletal or dentoalveolar development, to harmonize the stomatognathic system before the full eruption of all permanent teeth. The advantages of pendulum appliance are its minimal dependence on patient's compliance (child cooperation), ease of fabrication, onetime activation and adjustment of the springs if necessary to correct minor transverse and vertical molar positions. This article reports a successful treatment method of class II malocclusion with pendulum appliance in mixed dentition phase. Distalization of maxillary molar was done, followed by guidance of canine impaction orthodontically and other dental correction using 0.022 MBT appliances. Posttreatment results were stable and remarkable. How to cite this article: Patil RU, Prakash A, Agarwal A. Pendulum Therapy of Molar Distalization in Mixed Dentition. Int J Clin Pediatr Dent 2016;9(1):67-73.

  7. Use of sevoflurane inhalation sedation for outpatient third molar surgery.

    PubMed

    Ganzberg, S; Weaver, J; Beck, F M; McCaffrey, G

    1999-01-01

    This study attempted to determine if sevoflurane in oxygen inhaled via a nasal hood as a sole sedative agent would provide an appropriate level of deep sedation for outpatient third molar surgery. Twenty-four patients scheduled for third molar removal were randomly assigned to receive either nasal hood inhalation sevoflurane or an intravenous deep sedation using midazolam and fentanyl followed by a propofol infusion. In addition to measuring patient, surgeon, and dentist anesthesiologist subjective satisfaction with the technique, physiological parameters, amnesia, and psychomotor recovery were also assessed. No statistically significant difference was found between the sevoflurane and midazolam-fentanyl-propofol sedative groups in physiological parameters, degree of amnesia, reported quality of sedation, or patient willingness to again undergo a similar deep sedation. A trend toward earlier recovery in the sevoflurane group was identified. Sevoflurane can be successfully employed as a deep sedative rather than a general anesthetic for extraction of third molars in healthy subjects.

  8. First permanent molar root development arrest associated with compound odontoma.

    PubMed

    Gunda, Sachin A; Patil, Anil; Varekar, Aniruddha

    2013-07-04

    Trauma or infection to the primary tooth may have deleterious effects on the underlying developing tooth buds. Anatomically the root apices of primary teeth are in close proximity to the developing permanent tooth buds; hence spread of infection originating from pulp necrosis of primary tooth may not only affect the underlying tooth bud but may also affect the adjacent tooth buds. The extent of malformation depends on the developmental stage of tooth or the age of patient. Presented here is a rare case of complete arrest of maxillary first permanent molar root growth due to spread of periapical infection originating from second primary molar leading to failure of its eruption and finally extraction. Histopathlogical analysis revealed compound odontoma associated with maxillary first permanent molar.

  9. Rapid palatal expander: an anchor unit for second molar distalization in Angle Class II treatment.

    PubMed

    Kolokitha, Olga-Elpis; Papadopoulou, Alexandra K

    2010-01-01

    Distal movement of maxillary molars is a common approach for nonextraction treatment of Angle Class II patients. Because of known difficulties involving moving the maxillary first molars distally in the presence of second molars, this article describes how the distally directed force is applied immediately to the second molars. A rapid palatal expander can be used as a reliable unit to facilitate the distal movement of the second maxillary molars.

  10. Efficacy of 5 machining instruments in scaling of molar furcations.

    PubMed

    Takacs, V J; Lie, T; Perala, D G; Adams, D F

    1993-03-01

    The scaling efficacy of machining instruments was studied in the furcations of 100 extracted molars. The molars were divided into 5 groups with similar furcation anatomy, painted with artificial calculus, partly submerged in stone blocks, and the furcation entrances covered with a heavy rubber dam material. Ten mandibular and 10 maxillary molars were scaled by an experienced operator with each of the following instruments/inserts: ultrasonic instrument with either a prototype ball point insert or with a new pointed insert; ultrasonic instrument with a ball point insert; reciprocating hand-piece with new inserts for furcations; and a sonic scaler with a universal insert. The molar groups were coded and graded in a stereomicroscope by 2 independent examiners, and the rankings were tested with the Kruskal-Wallis test and the multiple comparisons between treatments test. The results revealed statistically significant differences between the instruments, as well as between different topographical areas of the furcations. The sonic scaler with a universal insert and the ultrasonic instrument with ball point inserts were significantly more efficient (P < 0.05) than the reciprocating handpiece with inserts in most of the areas studied. For mandibular molars, significantly better results (P < 0.05) were obtained for lingual furcation entrances than for furcation roofs. For maxillary molars, significantly better results (P < 0.05) were obtained for distal and buccal entrance areas than for furcation roofs and inside of mesial roots. The present study may give some guidance to the practitioner in choosing machining instruments for furcation cleaning as well as identifying the most difficult topographical areas to instrument.

  11. Facile spectrophotometric assay of molar equivalents of N-hydroxysuccinimide esters of monomethoxyl poly-(ethylene glycol) derivatives

    PubMed Central

    2012-01-01

    Background A new method is developed to quantify molar equivalents of N-hydroxysuccinimide (NHS) esters of derivatives of monomethoxyl poly-(ethylene glycol) (mPEG) in their preparations with NHS acetate ester as the reference. Results NHS ester of succinic monoester or carbonate of mPEG of 5,000 Da was synthesized and reacted with excessive ethanolamine in dimethylformamide at 25°C for 15 min. Residual ethanolamine was subsequently quantified by absorbance at 420 nm after reaction with 2,4,6-trinitrobenzenesulfonic acid (TNBS) at pH 9.2 for 15 min at 55°C followed by cooling with tap water. Reaction products of ethanolamine and NHS esters of mPEG caused no interference with TNBS assay of residual ethanolamine. Reaction between ethanolamine and NHS acetate ester follows 1:1 stoichiometry. By the new method, molar equivalents of NHS esters of carbonate and succinic monoester of mPEG in their preparations were about 90% and 60% of their theoretical values, respectively. During storage at 37°C in humid air, the new method detected spontaneous hydrolyses of the two NHS esters of mPEG more sensitively than the classical spectrophotometric method based on absorbance at 260 nm of NHS released by reaction with ammonia in aqueous solution. Conclusion The new method is favorable to quantify molar equivalents of NHS esters of mPEG derivatives and thus control quality of their preparations. PMID:23176729

  12. Partial molar quantity of an intensive mother function.

    PubMed

    Koga, Yoshikata

    2012-09-28

    A new formal definition is given to the partial molar quantity of a component i for an intensive mother function. We perturb the entire system by increasing the amount of the target component by δn(i) keeping others constant and measure the response of the system in terms of an intensive mother function, Φ, δΦ. We then define its partial molar quantity of the ith component, φ(i), as φ(i) = [δΦ∕{δn(i)∕(N + δn(i))

  13. Infraocclusion of secondary deciduous molars--an unusual outcome.

    PubMed

    Ponduri, Sirisha; Birnie, David J; Sandy, Jonathan R

    2009-09-01

    Infraocclusion is a condition frequently associated with primary molars. The infraoccluded primary teeth remain in a fixed position, while the teeth adjacent to them continue to erupt, moving occlusally. It is generally accepted that the cause of the altered occlusal level is ankylosis of the affected tooth. This report describes a case in which a short course of interceptive treatment with a 2 x 4 fixed appliance resulted in resolution of the infrocclusion. Recreating space for a severely infraoccluded second deciduous molar resulted in 'eruption' of the tooth without the need for extraction.

  14. Density, Molar Volume, and Surface Tension of Liquid Al-Ti

    NASA Astrophysics Data System (ADS)

    Wessing, Johanna Jeanette; Brillo, Jürgen

    2017-02-01

    Al-Ti-based alloys are of enormous technical relevance due to their specific properties. For studies in atomic dynamics, surface physics and industrial processing the precise knowledge of the thermophysical properties of the liquid phase is crucial. In the present work, we systematically measure mass density, ρ (g cm-3), and the surface tension, γ (N m-1), as functions of temperature, T, and compositions of binary Al-Ti melts. Electromagnetic levitation in combination with the optical dilatometry method is used for density measurements and the oscillating drop method for surface tension measurements. It is found that, for all compositions, density and surface tension increase linearly upon decreasing temperature in the liquid phase. Within the Al-Ti system, we find the largest values for pure titanium and the smallest for pure aluminum, which amount to ρ(L,Ti) = 4.12 ± 0.04 g cm-3 and γ(L,Ti) = 1.56 ± 0.02 N m-1; and ρ(L,Al) = 2.09 ± 0.01 g cm-3 and γ(L,Al) = 0.87 ± 0.06 N m-1, respectively. The data are analyzed concerning the temperature coefficients, ρ T and γ T, excess molar volume, V E, excess surface tension, γ E, and surface segregation of the surface active component, Al. The results are compared with thermodynamic models. Generally, it is found that Al-Ti is a highly nonideal system.

  15. 7 CFR 929.59 - Excess cranberries.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Excess cranberries. 929.59 Section 929.59 Agriculture... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Regulations § 929.59 Excess...

  16. 7 CFR 929.59 - Excess cranberries.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess cranberries. 929.59 Section 929.59 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Regulations § 929.59 Excess...

  17. 7 CFR 929.59 - Excess cranberries.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Excess cranberries. 929.59 Section 929.59 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Regulations § 929.59 Excess...

  18. 7 CFR 929.59 - Excess cranberries.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Excess cranberries. 929.59 Section 929.59 Agriculture... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Regulations § 929.59 Excess...

  19. 7 CFR 929.59 - Excess cranberries.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Excess cranberries. 929.59 Section 929.59 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Regulations § 929.59 Excess...

  20. 43 CFR 426.12 - Excess land.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... as excess is binding on the land. However, the landowner may change the designation under the...) If the status of land is changed by law or regulations. (1) If the district had a contract with... 25, 1926 (43 U.S.C. 423e); (ii) If the status of this land changes from nonexcess into excess after...

  1. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... INSURANCE AND INTEREST REDUCTION PAYMENT FOR RENTAL PROJECTS Eligibility Requirements for Mortgage Insurance... Section 236 interest reduction payments may apply to retain Excess Income for project use unless the mortgagor owes prior Excess Income and is not current in payments under a HUD-approved Workout or...

  2. 30 CFR 57.6902 - Excessive temperatures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific...

  3. 30 CFR 56.6902 - Excessive temperatures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions...

  4. 30 CFR 56.6902 - Excessive temperatures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions...

  5. 30 CFR 57.6902 - Excessive temperatures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific...

  6. 30 CFR 56.6902 - Excessive temperatures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions...

  7. 30 CFR 57.6902 - Excessive temperatures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific...

  8. 30 CFR 57.6902 - Excessive temperatures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific...

  9. 30 CFR 57.6902 - Excessive temperatures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Excessive temperatures. 57.6902 Section 57.6902... Requirements-Surface and Underground § 57.6902 Excessive temperatures. (a) Where heat could cause premature... shall— (1) Measure an appropriate number of blasthole temperatures in order to assess the specific...

  10. 30 CFR 56.6902 - Excessive temperatures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions...

  11. 30 CFR 56.6902 - Excessive temperatures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Excessive temperatures. 56.6902 Section 56.6902... Requirements § 56.6902 Excessive temperatures. (a) Where heat could cause premature detonation, explosive... an appropriate number of blasthole temperatures in order to assess the specific mine conditions...

  12. 24 CFR 236.60 - Excess income.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... mortgagor owes prior Excess Income and is not current in payments under a HUD-approved Workout or Repayment... current in payments under a HUD-approved Workout or Repayment Agreement or the mortgagor falls within any... of Excess Income that was: (i) Repaid in accordance with a Workout or Repayment Agreement with...

  13. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... mortgagor owes prior Excess Income and is not current in payments under a HUD-approved Workout or Repayment... current in payments under a HUD-approved Workout or Repayment Agreement or the mortgagor falls within any... of Excess Income that was: (i) Repaid in accordance with a Workout or Repayment Agreement with...

  14. Bladder calculus presenting as excessive masturbation.

    PubMed

    De Alwis, A C D; Senaratne, A M R D; De Silva, S M P D; Rodrigo, V S D

    2006-09-01

    Masturbation in childhood is a normal behaviour which most commonly begins at 2 months of age, and peaks at 4 years and in adolescence. However excessive masturbation causes anxiety in parents. We describe a boy with a bladder calculus presenting as excessive masturbation.

  15. Part B Excess Cost Quick Reference Document

    ERIC Educational Resources Information Center

    Ball, Wayne; Beridon, Virginia; Hamre, Kent; Morse, Amanda

    2011-01-01

    This Quick Reference Document has been prepared by the Regional Resource Center Program ARRA/Fiscal Priority Team to aid RRCP State Liaisons and other (Technical Assistance) TA providers in understanding the general context of state questions surrounding excess cost. As a "first-stop" for TA providers in investigating excess cost…

  16. Influence of excess diamine on properties of PMR polyimide resins and composites

    NASA Technical Reports Server (NTRS)

    Hurwitz, F. I.

    1980-01-01

    By varying the stoichiometry of the reactants in the preparation of PMR polyimide resin, changes occur in molecular weight distribution which influence the rheological properties and thus the processability of the resin, as well as the mechanical properties of the composite. The influence of 1-10 percent molar excess MDA on the molecular weight distribution and rheological properties of an imidized PMR system were exposed. Molecular weight distribution is characterized by gel permeation chromatography of the imidized molding compound; shear viscosity is related to changes in average molecular weight. The thermo-oxidative stability at 600 F, glass transition temperature, flexural and interlaminar shear properties of PMR polyimide/Celion 6000 graphite fiber composites are compared as a function of the percent excess MDA in the monomer reactant mixture.

  17. Variations in the mechanical properties of Alouatta palliata molar enamel.

    PubMed

    Darnell, Laura A; Teaford, Mark F; Livi, Kenneth J T; Weihs, Timothy P

    2010-01-01

    Teeth have provided insights into many topics including primate diet, paleobiology, and evolution, due to the fact that they are largely composed of inorganic materials and may remain intact long after an animal is deceased. Previous studies have reported that the mechanical properties, chemistry, and microstructure of human enamel vary with location. This study uses nanoindentation to map out the mechanical properties of Alouatta palliata molar enamel on an axial cross-section of an unworn permanent third molar, a worn permanent first molar, and a worn deciduous first molar. Variations were then correlated with changes in microstructure and chemistry using scanning electron microscopy and electron microprobe techniques. The hardness and Young's modulus varied with location throughout the cross-sections from the occlusal surface to the dentin-enamel junction (DEJ), from the buccal to lingual sides, and also from one tooth to another. These changes in mechanical properties correlated with changes in the organic content of the tooth, which was shown to increase from approximately 6% near the occlusal surface to approximately 20% just before the DEJ. Compared to human enamel, the Alouatta enamel showed similar microstructures, chemical constituents, and magnitudes of mechanical properties, but showed less variation in hardness and Young's modulus, despite the very different diet of this species.

  18. Endodontic and restorative management of incompletely fractured molar teeth.

    PubMed

    Gutmann, J L; Rakusin, H

    1994-11-01

    The treatment of fractured teeth poses significant problems for the practitioner. However, once the treatment planning decision has been made to attempt to retain the tooth, various practical regimens are available to effect this goal. This paper addresses the specific use of glass ionomer in the restorative management of incompletely, vertically fractured molar teeth integrated with specific root canal treatment techniques.

  19. Evaluation of the surgical difficulty in lower third molar extraction.

    PubMed

    Barreiro-Torres, José; Diniz-Freitas, Marcio; Lago-Méndez, Lucía; Gude-Sampedro, Francisco; Gándara-Rey, José-Manuel; García-García, Abel

    2010-11-01

    The ability to predict the surgical difficulty of lower third molar extraction facilitates the design of treatment plans by minimizing complications and improving the preparation of patients and assistants in terms of the postoperative management of inflammation and pain. The aims of this study were to evaluate the value of panoramic radiographs in predicting lower third molar extraction difficulty and technique and to determine if the experience of the practitioner had any influence on this predictive ability. Fourteen dental practitioners with varying levels of experience evaluate the difficulty of lower third molar extraction in a group of patients using a 100-mm visual analog scale (VAS) and a modified version of a surgical difficulty scale. The results were then compared to postoperative scores calculated using the same scale. A tendency to underestimate the difficulty of procedures that was more pronounced in observers with greater levels of experience was observed. A low level of agreement between preoperative and postoperative evaluations using the surgical difficulty scale as well as an association between difficulty assessed preoperatively using the VAS and difficulty assessed postoperatively using the surgical difficulty scale was also found. The use of panoramic radiographs does not allow practitioners to accurately predict lower third molar extraction difficulty and technique, regardless of their level of experience.

  20. Incidence of lingual nerve paraesthesia following mandibular third molar surgery

    PubMed Central

    Lata, Jeevan; Tiwari, Arunesh K.

    2011-01-01

    Context: The surgical removal of impacted mandibular third molar is associated with minor but expected complications like pain, swelling, bruising and trismus. The lingual nerve damage sometimes occurs after the removal of mandibular third molar producing impaired sensation or permanent sensory loss. This complication is usually unexpected and unacceptable for the patients particularly if no prior warning has been given. Aims: The aim of the present clinical prospective study was to determine the clinical incidence of lingual nerve injury following mandibular third molar removal and to analyze possible factors for the lingual nerve injury. Settings and Design: Clinical prospective study in the Department of Oral Surgery, Punjab Government Dental College and Hospital, Amritsar. Materials and Methods: Ninety patients were selected randomly, amongst the patients, who reported to our department from January 2009 to December 2009 for the surgical removal of impacted mandibular third molar. To minimize the risk of lingual nerve injury, the standard terence wards incision was made in all cases and only buccal flap was raised. Statistical Analysis: The small number of paraesthesia precluded statistical analysis. Results: Out of 90 patients, six patients were diagnosed with lingual nerve paraesthesia. The overall incidence rate of lingual nerve injury was 6.6%. Conclusions: It can be concluded that lingual nerve paraesthesia can occur with or without reflection of lingual flap in spite of all the measures taken to protect it. It may be contributed to the fact of anatomical variations of lingual nerve. PMID:22639500

  1. Long term effects of primary molar pulpotomies on succedaneous bicuspids.

    PubMed

    Messer, L B; Cline, J T; Korf, N W

    1980-02-01

    Forty-three bicuspids which replaced successfully pulpotomized vital or non-vital primary molars, and twenty bicuspids, which erupted following unsuccessful pulpotomies requiring extraction of the preceding teeth, were examined for defects of position and enamel. In comparison with contralateral control teeth, test teeth in both groups showed an increased prevalence of rotation and enamel surface defects.

  2. Management of Six Root Canals in Mandibular First Molar

    PubMed Central

    Gomes, Fabio de Almeida; Sousa, Bruno Carvalho

    2015-01-01

    Success in root canal treatment is achieved after thorough cleaning, shaping, and obturation of the root canal system. This clinical case describes conventional root canal treatment of an unusual mandibular first molar with six root canals. The prognosis for endodontic treatment in teeth with abnormal morphology is unfavorable if the clinician fails to recognize extra root canals. PMID:25685156

  3. Zaleplon (Sonata) Oral Sedation for Outpatient Third Molar Extraction Surgery

    PubMed Central

    Ganzberg, Steven I; Dietrich, Thomas; Valerin, Manuel; Beck, F. Michael

    2005-01-01

    Zalpelon was compared with triazolam for oral sedation in a third molar surgery model using a double-blind crossover design. Factors such as anxiolysis, amnesia, and quality of sedation were assessed. Of the 14 participants who completed the study, zaleplon sedation was found to be similar to triazolam sedation in all regards except that recovery from zaleplon was more rapid. PMID:16596911

  4. Molar incisor hypomineralization: review and recommendations for clinical management.

    PubMed

    William, Vanessa; Messer, Louise B; Burrow, Michael F

    2006-01-01

    Molar incisor hypomineralization (MIH) describes the clinical picture of hypomineralization of systemic origin affecting one or more first permanent molars (FPMs) that are associated frequently with affected incisors. Etiological associations with systemic conditions or environmental insults during the child's first 3 years have been implicated. The complex care involved in treating affected children must address their behavior and anxiety, aiming to provide a durable restoration under pain-free conditions. The challenges include adequate anaesthesia, suitable cavity design, and choice of restorative materials. Restorations in hypomineralized molars appear to fail frequently; there is little evidence-based literature to facilitate clinical decisions on cavity design and material choice. A 6-step approach to management is described: (1) risk identification; (2) early diagnosis; (3) remineralization and desensitization; (4) prevention of caries and posteruption breakdown; (5) restorations and extractions; and (6) maintenance. The high prevalence of MIH indicates the need for research to clarify etiological factors and improve the durability of restorations in affected teeth. The purpose of this paper was to describe the diagnosis, prevalence, putative etiological factors, and features of hypomineralized enamel in molar incisor hypomineralization and to present a sequential approach to management.

  5. Factors associated with molar incisor hypomineralization in Thai children.

    PubMed

    Pitiphat, Waranuch; Luangchaichaweng, Sarunporn; Pungchanchaikul, Patimaporn; Angwaravong, Onauma; Chansamak, Nusara

    2014-08-01

    Molar incisor hypomineralization (MIH) is a qualitative developmental enamel defect that affects one to four permanent first molars, with or without involvement of permanent incisors. Its etiology is of systemic origin, but is not well understood. Therefore, we conducted this cross-sectional study to examine pre-, peri-, and postnatal risk factors for MIH among children, 7-8 yr of age, in urban areas of Khon Kaen, Thailand. Molar incisor hypomineralization defects were diagnosed using the European Academy of Pediatric Dentistry criteria. Mothers or primary caregivers were interviewed on maternal medical history and habits during pregnancy, pregnancy and delivery complications, and the child's medical history. Molar incisor hypomineralization defects were observed in 78 (27.7%) of 282 children. Multiple logistic regression analysis showed a statistically significant association between the development of MIH and Cesarean section (adjusted OR = 2.0, 95% CI = 1.1-3.7), complications during vaginal delivery (adjusted OR = 4.5, 95% CI = 1.9-11.0), and severe/chronic illness when under 3 yr of age (adjusted OR = 2.9, 95% CI = 1.6-5.0). There was no association of preterm birth and low birth weight with MIH. The results suggest that Cesarean section, complications during vaginal delivery, and poor health during the first 3 yr of life are independent risk factors for MIH.

  6. Unilateral maxillary molar distalization with zygoma-gear appliance.

    PubMed

    Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

    2012-08-01

    The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss.

  7. Dental fluorosis and skeletal fluoride content as biomarkers of excess fluoride exposure in marsupials.

    PubMed

    Death, Clare; Coulson, Graeme; Kierdorf, Uwe; Kierdorf, Horst; Morris, William K; Hufschmid, Jasmin

    2015-11-15

    Particulate and gaseous fluoride emissions contaminate vegetation near fluoride-emitting industries, potentially impacting herbivorous wildlife in neighboring areas. Dental fluorosis has been associated with consumption of fluoride-contaminated foliage by juvenile livestock and wildlife in Europe and North America. For the first time, we explored the epidemiology and comparative pathology of dental fluorosis in Australian marsupials residing near an aluminium smelter. Six species (Macropus giganteus, Macropus rufogriseus, Wallabia bicolor, Phascolarctos cinereus, Trichosurus vulpecula, Pseudocheirus peregrinus) demonstrated significantly higher bone fluoride levels in the high (n=161 individuals), compared to the low (n=67 individuals), fluoride areas (p<0.001). Necropsy examinations of all six species from the high-fluoride area near the smelter revealed dental lesions considered characteristic of dental fluorosis in eutherian mammals. Within the high-fluoride area, 67% of individuals across the six species showed dental enamel lesions, compared to 3% in the low-fluoride areas. Molars that erupted before weaning were significantly less likely to display pathological lesions than those developing later, and molars in the posterior portion of the dental arcade were more severely fluorotic than anterior molars in all six species. The severity of dental lesions was positively associated with increasing bone fluoride levels in all species, revealing a potential biomarker of excess fluoride exposure.

  8. Potential Moderating Effects of Selenium on Mercury Uptake and Selenium:Mercury Molar Ratios in Fish From Oak Ridge and Savannah River Site - 12086

    SciTech Connect

    Burger, Joanna; Gochfeld, Michael; Donio, Mark; Jeitner, Christian; Pittfield, Taryn

    2012-07-01

    species, however, suggests that the relative Se:Hg molar ratios in fish are not stable enough to be used in risk assessment at this time. Nor is it known how much excess selenium is required to confer any degree of protectiveness. That is, in conducting risk assessments, it is not possible to determine the spread of ratios, which would be needed for probabilistic risk assessment. Significantly more fish samples per species are required to begin to generate data that would allow it use in risk assessment. Adding Se:Hg molar ratios seems to complicate risk assessment for the potential adverse effects of mercury exposure, and using mercury levels at this time remains the most viable option. (authors)

  9. 75 FR 27572 - Monthly Report of Excess Income and Annual Report of Uses of Excess Income

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-17

    ... URBAN DEVELOPMENT Monthly Report of Excess Income and Annual Report of Uses of Excess Income AGENCY... and Annual Report of Uses of Excess Income. OMB Approval Number: 2502-0086. Form Numbers: None--form... INFORMATION CONTACT: Leroy McKinney Jr., Reports Management Officer, QDAM, Department of Housing and...

  10. Odontometric analysis of permanent maxillary first molar in gender determination

    PubMed Central

    Shireen, Ayesha; Ara, Syeda Arshiya

    2016-01-01

    Aims: This study was conducted to assess the sex determination potential from mesiodistal (MD) and buccolingual (BL) dimensions of permanent maxillary first molar. Subjects and Methods: The study was conducted in the Department of Oral Medicine and Radiology, Al-Badar Rural Dental College and Hospital, Gulbarga, Karnataka, on 600 subjects (300 male and 300 female), aged 17–25 years. The subjects were selected based on the inclusion and exclusion criteria set forth for the study. After obtaining informed consent, the intraoral measurements of MD and BL dimensions on casts of the first maxillary molars were taken using digital vernier caliper with resolution of 0.01 mm. Statistical Analysis Used: The data obtained were subjected to statistical analysis using paired and unpaired t-test to compare MD and BL dimensions between males and females. P ≤0.05 was considered statistically significant. Results: The mean MD width of the first maxillary molar was 10.60 ± 0.6644 mm (right) and 10.60 ± 0.6644 mm (left) in males and 10.40 ± 0.6255 mm (right) and 10.40 ± 0.6255 mm (left) in females. The mean BL width of the first maxillary molar was 11.60 ± 1.2227 mm (right) and 11.60 ± 1.2227 mm (left) in males and 11.20 ± 0.8440 mm (right) and 11.20 ± 0.8440 mm (left) in females. The differences between males and females in MD and BL dimensions measured were statistically significant (P < 0.05). Right and left MD dimensions exhibited sexual dimorphism of 1.92% and right and left BL dimensions exhibited sexual dimorphism of 3.57%. Conclusions: The MD and BL dimensions of the maxillary first molars may be used as an aid in sex discrimination. PMID:28123268

  11. Genetics Home Reference: aromatase excess syndrome

    MedlinePlus

    ... Sources for This Page Fukami M, Shozu M, Ogata T. Molecular bases and phenotypic determinants of aromatase ... T, Nishigaki T, Yokoya S, Binder G, Horikawa R, Ogata T. Aromatase excess syndrome: identification of cryptic duplications ...

  12. 34 CFR 300.16 - Excess costs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... are in excess of the average annual per-student expenditure in an LEA during the preceding school year for an elementary school or secondary school student, as may be appropriate, and that must be...

  13. Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction

    PubMed Central

    Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan

    2015-01-01

    Abstract Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction. The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus. We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar. The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials. We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise. A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75–5.52, P < 0.0001). Patients receiving the piezoelectric technique had less swelling at postoperative days 1, 3, 5, and 7 (all Ps ≤0.023). Additionally, there was a trend of less postoperative pain and trismus in the piezosurgery groups. The number of included randomized controlled

  14. Phospholipids as Biomarkers for Excessive Alcohol Use

    DTIC Science & Technology

    2014-10-01

    AWARD NUMBER: W81XWH-12-1-0497 TITLE: Phospholipids as Biomarkers for Excessive Alcohol Use...SUBTITLE Phospholipids as Biomarkers for Excessive Alcohol Use 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-12-1-0497 5c. PROGRAM ELEMENT NUMBER 6...ability to measure alcohol quantity consumed and associated damage better than can be done with ethyl alcohol level measures and other existing

  15. Phospholipids as Biomarkers for Excessive Alcohol Use

    DTIC Science & Technology

    2013-10-01

    S. et al. (2002). Decreased activity of brain phospholipid metabolic enzymes in human users of cocaine and methamphetamine. Drug & Alcohol ...AWARD NUMBER: W81XWH-12-1-0497 TITLE: Phospholipids as Biomarkers for Excessive Alcohol Use...NUMBER Phospholipids as Biomarkers for Excessive Alcohol Use 5b. GRANT NUMBER W81XWH-12-1-0497 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S

  16. Spontaneous emergence of overgrown molar teeth in a colony of Prairie voles (Microtus ochrogaster).

    PubMed

    Jheon, Andrew H; Prochazkova, Michaela; Sherman, Michael; Manoli, Devanand S; Shah, Nirao M; Carbone, Lawrence; Klein, Ophir

    2015-03-23

    Continuously growing incisors are common to all rodents, which include the Microtus genus of voles. However, unlike many rodents, voles also possess continuously growing molars. Here, we report spontaneous molar defects in a population of Prairie voles (Microtus ochrogaster). We identified bilateral protuberances on the ventral surface of the mandible in several voles in our colony. In some cases, the protuberances broke through the cortical bone. The mandibular molars became exposed and infected, and the maxillary molars entered the cranial vault. Visualisation upon soft tissue removal and microcomputed tomography (microCT) analyses confirmed that the protuberances were caused by the overgrowth of the apical ends of the molar teeth. We speculate that the unrestricted growth of the molars was due to the misregulation of the molar dental stem cell niche. Further study of this molar phenotype may yield additional insight into stem cell regulation and the evolution and development of continuously growing teeth.

  17. On the apparent molar volumes of nonelectrolytes in water

    SciTech Connect

    Anderko, A.; Chan, J.P.; Pitzer, K.S. )

    1993-04-01

    Apparent molar volumes of aqueous solutions of argon and xenon have been calculated using a previously developed comprehensive equation of state for nonelectrolyte systems. The equation consists of a virial expansion truncated after the fourth virial coefficient and a closed-form term approximating higher coefficients. Mixing rules are based on the composition dependence of virial coefficients, which is known from statistical mechanics. The equation accurately represents vapor-liquid and gas-gas equilibria for the Ar + H[sub 2]O and Xe + H[sub 2]O systems over wide ranges of pressure and temperature using two binary parameters. With the binary parameters determined from phase equilibrium data, the equation accurately predicts apparent molar volumes V[sub [phi

  18. Natal molars in Pfeiffer syndrome type 3: a case report.

    PubMed

    Alvarez, M P; Crespi, P V; Shanske, A L

    1993-01-01

    The following report is the first documented case of natal teeth associated with a recently described new entity, Pfeiffer syndrome type 3. The clinical manifestations consistent with the spectrum of this rare disorder are described with an emphasis on the concomitant natal teeth. Pfeiffer syndrome type 3 is one of the craniosynostosis syndromes and has been described in only two patients to date. Both mandibular incisors and maxillary molar natal teeth were found. Natal teeth are teeth, which are present in the oral cavity at birth. They are often associated with developmental abnormalities and recognized syndromes. Their incidence ranges from 1 in 2,000 to 3,500 births. The natal teeth found in this infant included both the mandibular primary incisors and maxillary primary first molars bilaterally. The clinical and histological considerations of natal teeth and their management are discussed. The presence of multiple natal teeth is extremely rare.

  19. Dentigerous cyst associated with a formocresol pulpotomized deciduous molar.

    PubMed

    Asián-González, Eugenia; Pereira-Maestre, Manuela; Conde-Fernández, Dolores; Vilchez, Ignacio; Segura-Egea, Juan José; Gutiérrez-Pérez, José Luis

    2007-04-01

    This report presents a case of dentigerous cyst associated with a formocresol pulpotomized deciduous molar detected during routine examination. Dentigerous cyst is an epithelial-lined developmental cavity that encloses the crown of an unerupted tooth at the cementoenamel junction. The present case describes a 9-year-old girl sent to the dental clinic by her dentist, who had accidentally discovered in the panoramic radiograph a single, unilocular, well-defined, radiolucent area enclosing the second left unerupted mandibular premolar. The second left primary molar had been pulpotomized 2 years before and buccal swelling without redness occurred near the tooth, evidencing bone expansion. Surgical treatment was carried out, the tooth was extracted, and a cystectomy was performed under local anesthesia in the dental office. The histological study confirmed the suspected diagnosis of dentigerous cyst. The relation between pulpotomy and dentigerous cysts is discussed.

  20. Molar distalization with the assistance of Temporary Anchorage Devices.

    PubMed

    Palencar, Adrian J

    2015-01-01

    This article describes efficient techniques for distalization of maxillary and mandibular molars with the assistance of Temporary Anchorage Devices (TADs). There are numerous occasions where the distalization of molars is required in lieu of the odontectomy of bicuspids. In the past, extra-oral force has been used, (i.e. Cervical or Combination Head Gear, or intra-oral force, i.e. Posterior Sagittal Appliance, Modified Greenfield Appliance, Williams DMJ 20001, CD Distalizer, Magill Sagittal, Pendulum Appliance, etc.). All the intra-oral appliances have a common denominator the orthodontic clinician has to deal with, the undesirable expression of the Third Law of Newton. The utilization of TADs allows us to circumvent this shortcoming, establishing an absolute anchorage, and thus completely negate the expression of the Third Law of Newton.

  1. Replacement of missing molar teeth--a prosthodontic dilemma.

    PubMed

    Devlin, H

    1994-01-08

    In deciding whether to replace lost lower molar teeth with a denture or accept the status quo, the dentist is faced with a choice of equally unfavourable alternatives. Dentures tend to accumulate plaque, the main cause of periodontal destruction, but failure to provide a prosthesis may also disadvantage the patient. Whether or not the provision of a replacement partial denture following molar tooth extraction helps to maintain the periodontium of the remaining dentition is not known. Patients are also aware of the dilemma. Many surveys have shown that a large proportion of replacement lower, free-end saddle dentures are never worn. However, a failure to provide partial dentures may have many adverse effects, especially in young adults.

  2. Thermal correction to the molar polarizability of a Boltzmann gas

    SciTech Connect

    Jentschura, U. D.; Puchalski, M.; Mohr, P. J.

    2011-12-15

    Metrology in atomic physics has been crucial for a number of advanced determinations of fundamental constants. In addition to very precise frequency measurements, the molar polarizability of an atomic gas has recently also been measured very accurately. Part of the motivation for the measurements is due to ongoing efforts to redefine the International System of Units (SI), for which an accurate value of the Boltzmann constant is needed. Here we calculate the dominant shift of the molar polarizability in an atomic gas due to thermal effects. It is given by the relativistic correction to the dipole interaction, which emerges when the probing electric field is Lorentz transformed into the rest frame of the atoms that undergo thermal motion. While this effect is small when compared to currently available experimental accuracy, the relativistic correction to the dipole interaction is much larger than the thermal shift of the polarizability induced by blackbody radiation.

  3. Extrusion of impacted mandibular second molar using removable appliance

    PubMed Central

    Karthikeyan, M. K.; Prabhakar, Ramachandran; Saravanan, R.; Vikram, N. Raj; Kumar, R. Vinoth; Prasath, R. Eshwara

    2014-01-01

    The purpose of this article is to review the principles of case management of impacted mandibular molars and to illustrate their potential to respond well to treatment. Although the scope of treatment may be influenced by the patient's age, past dental history, severity of impaction, dentoalveolar development, and root form, the case reports demonstrate the inherent potential for good treatment outcome even in the most unfavorable circumstances. PMID:25210378

  4. Fate of the Molar Dental Lamina in the Monophyodont Mouse

    PubMed Central

    Dosedělová, Hana; Dumková, Jana; Lesot, Hervé; Glocová, Kristýna; Kunová, Michaela; Tucker, Abigail S.; Veselá, Iva; Krejčí, Pavel; Tichý, František; Hampl, Aleš; Buchtová, Marcela

    2015-01-01

    The successional dental lamina (SDL) plays an essential role in the development of replacement teeth in diphyodont and polyphyodont animals. A morphologically similar structure, the rudimental successional dental lamina (RSDL), has been described in monophyodont (only one tooth generation) lizards on the lingual side of the developing functional tooth. This rudimentary lamina regresses, which has been proposed to play a role in preventing the formation of future generations of teeth. A similar rudimentary lingual structure has been reported associated with the first molar in the monophyodont mouse, and we show that this structure is common to all murine molars. Intriguingly, a lingual lamina is also observed on the non-replacing molars of other diphyodont mammals (pig and hedgehog), initially appearing very similar to the successional dental lamina on the replacing teeth. We have analyzed the morphological as well as ultrastructural changes that occur during the development and loss of this molar lamina in the mouse, from its initiation at late embryonic stages to its disappearance at postnatal stages. We show that loss appears to be driven by a reduction in cell proliferation, down-regulation of the progenitor marker Sox2, with only a small number of cells undergoing programmed cell death. The lingual lamina was associated with the dental stalk, a short epithelial connection between the tooth germ and the oral epithelium. The dental stalk remained in contact with the oral epithelium throughout tooth development up to eruption when connective tissue and numerous capillaries progressively invaded the dental stalk. The buccal side of the dental stalk underwent keratinisation and became part of the gingival epithelium, while most of the lingual cells underwent programmed cell death and the tissue directly above the erupting tooth was shed into the oral cavity. PMID:26010446

  5. Formation and development of maxillary first molars with delayed eruption.

    PubMed

    Sano, Natsuki; Kameda, Takashi; Terashima, Yukari; Batbayar, Nomintsetseg; Terada, Kazuto

    2015-09-01

    Cases of congenitally missing and delayed eruption of the maxillary first molar are rare. However, in recent years, we have experienced cases of suspected delayed eruption of or congenitally missing first molars. The purpose of this study was to analyze the formation of delayed erupted maxillary first molars (M1) (>2 standard deviations), which play important roles in occlusion, and normal eruption of the maxillary first molars (U6). The frequency of M1 among patients born between 1974 and 1994 in one institution with a clear total patient number and personal oral histories was 1.55 % [80 % bilateral eruption in 8 of 806 male patients (0.99 %) and 23 of 1195 female patients (1.92 %)]. To evaluate the formation and eruption of M1 according to Moorrees's tooth formation stages, panoramic X-ray films were obtained every year for 73 patients with M1 from 3 institutions (20 male and 53 female patients, total 131 M1s) without systematic histories or genetic disorders. The development/growth curve of M1 was fitted to both the logistic curve and U6 curve. The M1 development/growth curve was started behind with U6 curve; however, the straight part of the M1 curve exhibited steep inclination compared with the straight part of the U6 curve. The curve of the eruption pathway of M1 also exhibited a sigmoid S shape. These results indicate that the development and migration speed of M1 are faster than that of U6, excluding the delayed start point. These results may help orthodontists in treatment planning for patients with M1.

  6. From molecular to molar: a paradigm shift in behavior analysis.

    PubMed Central

    Baum, William M

    2002-01-01

    A paradigm clash is occurring within behavior analysis. In the older paradigm, the molecular view, behavior consists of momentary or discrete responses that constitute instances of classes. Variation in response rate reflects variation in the strength or probability of the response class. The newer paradigm, the molar view, sees behavior as composed of activities that take up varying amounts of time. Whereas the molecular view takes response rate and choice to be "derived" measures and hence abstractions, the molar view takes response rate and choice to be concrete temporally extended behavioral allocations and regards momentary "responses" as abstractions. Research findings that point to variation in tempo, asymmetry in concurrent performance, and paradoxical resistance to change are readily interpretable when seen in the light of reinforcement and stimulus control of extended behavioral allocations or activities. Seen in the light of the ontological distinction between classes and individuals, extended behavioral allocations, like species in evolutionary taxonomy, constitute individuals, entities that change without changing their identity. Seeing allocations as individuals implies that less extended activities constitute parts of larger wholes rather than instances of classes. Both laboratory research and everyday behavior are explained plausibly in the light of concrete extended activities and their nesting. The molecular- view, because it requires discrete responses and contiguous events, relies on hypothetical stimuli and consequences to account for the same phenomena. One may prefer the molar view on grounds of elegance, integrative power, and plausibility. PMID:12144313

  7. Molar Macrowear Reveals Neanderthal Eco-Geographic Dietary Variation

    PubMed Central

    Fiorenza, Luca; Benazzi, Stefano; Tausch, Jeremy; Kullmer, Ottmar; Bromage, Timothy G.; Schrenk, Friedemann

    2011-01-01

    Neanderthal diets are reported to be based mainly on the consumption of large and medium sized herbivores, while the exploitation of other food types including plants has also been demonstrated. Though some studies conclude that early Homo sapiens were active hunters, the analyses of faunal assemblages, stone tool technologies and stable isotopic studies indicate that they exploited broader dietary resources than Neanderthals. Whereas previous studies assume taxon-specific dietary specializations, we suggest here that the diet of both Neanderthals and early Homo sapiens is determined by ecological conditions. We analyzed molar wear patterns using occlusal fingerprint analysis derived from optical 3D topometry. Molar macrowear accumulates during the lifespan of an individual and thus reflects diet over long periods. Neanderthal and early Homo sapiens maxillary molar macrowear indicates strong eco-geographic dietary variation independent of taxonomic affinities. Based on comparisons with modern hunter-gatherer populations with known diets, Neanderthals as well as early Homo sapiens show high dietary variability in Mediterranean evergreen habitats but a more restricted diet in upper latitude steppe/coniferous forest environments, suggesting a significant consumption of high protein meat resources. PMID:21445243

  8. Efficacy of Postoperative Prophylactic Antibiotic Therapy in Third Molar Surgery

    PubMed Central

    Reddy B, Praveen

    2014-01-01

    Introduction: Surgical extraction of mandibular third molar is the most frequently performed procedure in oral surgery. This procedure is associated with significant postoperative sequelae such as trismus, swelling, pain and infection. The need of antibiotic therapy during the removal of mandibular third molar has been a contentious issue. Method: This study investigated a regimen by using amoxycillin and metronidazole in one group and without using antibiotics in the other. Both the groups were assessed postoperatively on the 1st, 2nd, 5th, 7th and 10th days by the same observer for post operative mouth opening (interincisal distance), presence of a purulent discharge at the site of surgery, pain and swelling. Result: Overall, no statistically significant difference was seen between both the treatment groups when interincisal distance, pain, swelling and purulent discharge were considered. Conclusion: The results of this study failed to show any advantage which was associated with the routine postoperative use of antibiotics in asymptomatic third molar surgeries. PMID:24995236

  9. Variable permanent mandibular first molar: Review of literature

    PubMed Central

    Ballullaya, Srinidhi V; Vemuri, Sayesh; Kumar, Pabbati Ravi

    2013-01-01

    Introduction: The success of root canal therapy depends on the locations of all the canals, thourough debridement and proper sealing. At times the clinicians are challenged with variations in morphology of root canal. This review article attempts to list out all the variations of permanent mandibular first molar published so for in the literature. Materials and Methods: An exhaustive search was undertaken using PUBMED database to identify published literature from 1900 to 2010 relating to the root canal morphology of permanent first molar by using key words. The selected artcles were obtained and reviewed. Results: Total ninty seven articles were selected out of which 50 were original article and forty seven were case reports. The incidence of third canal in mesial root was 0.95% to 15%. The incidence of three rooted mandibular first molar was 3% to 33%. Only ninety cases reported with c-shape canal configuration. Incidence of Taurodintism without congenital disorder was very rare. Conclusion: The root canal treatment requires proper knowlegde of variations in root canal morphology in order to recognise, disinfect and seal all portal of exit. This can be accomplished with proper diagnosis using newer modes, modification in access preparation, use of operating microscope, enhanced methods of disinfecting and sealing of all canals. PMID:23716959

  10. Molar tooth carbonates and benthic methane fluxes in Proterozoic oceans

    PubMed Central

    Shen, Bing; Dong, Lin; Xiao, Shuhai; Lang, Xianguo; Huang, Kangjun; Peng, Yongbo; Zhou, Chuanming; Ke, Shan; Liu, Pengju

    2016-01-01

    Molar tooth structures are ptygmatically folded and microspar-filled structures common in early- and mid-Proterozoic (∼2,500–750 million years ago, Ma) subtidal successions, but extremely rare in rocks <750 Ma. Here, on the basis of Mg and S isotopes, we show that molar tooth structures may have formed within sediments where microbial sulphate reduction and methanogenesis converged. The convergence was driven by the abundant production of methyl sulphides (dimethyl sulphide and methanethiol) in euxinic or H2S-rich seawaters that were widespread in Proterozoic continental margins. In this convergence zone, methyl sulphides served as a non-competitive substrate supporting methane generation and methanethiol inhibited anaerobic oxidation of methane, resulting in the buildup of CH4, formation of degassing cracks in sediments and an increase in the benthic methane flux from sediments. Precipitation of crack-filling microspar was driven by methanogenesis-related alkalinity accumulation. Deep ocean ventilation and oxygenation around 750 Ma brought molar tooth structures to an end. PMID:26739600

  11. Quality of life following third molar removal under conscious sedation

    PubMed Central

    Sancho-Puchades, Manuel; Berini-Aytés, Leonardo; Gay-Escoda, Cosme

    2012-01-01

    Aim: The aim of this study was to assess quality of life (QoL) and degree of satisfaction among outpatients subjected to surgical extraction of all four third molars under conscious sedation. A second objective was to describe the evolution of self-reported pain measured in a visual analogue scale (VAS) in the 7 days after extraction. Study design: Fifty patients received a questionnaire assessing social isolation, working isolation, eating and speaking ability, diet modifications, sleep impairment, changes in physical appearance, discomfort at suture removal and overall satisfaction at days 4 and 7 after surgery. Pain was recorded by patients on a 100-mm pain visual analogue scale (VAS) every day after extraction until day 7. Results: Thirty-nine patients fulfilled correctly the questionnaire. Postoperative pain values suffered small fluctuations until day 5 (range: 23 to 33 mm in a 100-mm VAS), when dicreased significantly. A positive association was observed between difficult ranked surgeries and higher postoperative pain levels. The average number of days for which the patient stopped working was 4.9. Conclusion: The removal of all third molars in a single appointment causes an important deterioration of the patient’s QoL during the first postoperative week, especially due to local pain and eating discomfort. Key words:Third molar removal, quality of life, sedation. PMID:22926461

  12. Subcutaneous emphysema during third molar surgery: a case report.

    PubMed

    Romeo, Umberto; Galanakis, Alexandros; Lerario, Francesco; Daniele, Gabriele Maria; Tenore, Gianluca; Palaia, Gaspare

    2011-01-01

    Extraction of third molars is the most common surgical procedure performed in oral surgery on a daily basis and, despite surgical skills and expertise, complications may occur. Complications observed during or after third molar removal may include pain, swelling, bleeding, infection, sinus perforation and nerve damage. Fortunately, with a proper management and a good surgical technique, the incidence of such events is low. Subcutaneous emphysema associated with dental extraction occurs when the air from the high-speed dental handpiece is forced into the soft tissue through the reflected flap and invades the adjacent tissues, leading to swelling, crepitus on palpation and occasionally spreading through the tissue spaces of the fascial planes. Although rare, iatrogenic subcutaneous emphysema can have serious and potentially life-threatening consequences. Care should be taken when using air-driven handpieces. The access of air into the facial tissues is not limited to tooth extractions, but may also occur through other portals of entrance, such as endodontically treated teeth, periodontium and lacerations of intraoral soft tissues. When subcutaneous emphysema occurs, it must be quickly diagnosed and properly managed to reduce the risk of further complications. This report presents a case of subcutaneous emphysema occurred during extraction of a mandibular third molar extraction with the use of an air turbine handpiece. Case management is described and issues relative to the diagnosis and prevention of this surgical complication are discussed.

  13. Molar tooth carbonates and benthic methane fluxes in Proterozoic oceans.

    PubMed

    Shen, Bing; Dong, Lin; Xiao, Shuhai; Lang, Xianguo; Huang, Kangjun; Peng, Yongbo; Zhou, Chuanming; Ke, Shan; Liu, Pengju

    2016-01-07

    Molar tooth structures are ptygmatically folded and microspar-filled structures common in early- and mid-Proterozoic (∼2,500-750 million years ago, Ma) subtidal successions, but extremely rare in rocks <750 Ma. Here, on the basis of Mg and S isotopes, we show that molar tooth structures may have formed within sediments where microbial sulphate reduction and methanogenesis converged. The convergence was driven by the abundant production of methyl sulphides (dimethyl sulphide and methanethiol) in euxinic or H2S-rich seawaters that were widespread in Proterozoic continental margins. In this convergence zone, methyl sulphides served as a non-competitive substrate supporting methane generation and methanethiol inhibited anaerobic oxidation of methane, resulting in the buildup of CH4, formation of degassing cracks in sediments and an increase in the benthic methane flux from sediments. Precipitation of crack-filling microspar was driven by methanogenesis-related alkalinity accumulation. Deep ocean ventilation and oxygenation around 750 Ma brought molar tooth structures to an end.

  14. Molar tooth carbonates and benthic methane fluxes in Proterozoic oceans

    NASA Astrophysics Data System (ADS)

    Shen, Bing; Dong, Lin; Xiao, Shuhai; Lang, Xianguo; Huang, Kangjun; Peng, Yongbo; Zhou, Chuanming; Ke, Shan; Liu, Pengju

    2016-01-01

    Molar tooth structures are ptygmatically folded and microspar-filled structures common in early- and mid-Proterozoic (~2,500-750 million years ago, Ma) subtidal successions, but extremely rare in rocks <750 Ma. Here, on the basis of Mg and S isotopes, we show that molar tooth structures may have formed within sediments where microbial sulphate reduction and methanogenesis converged. The convergence was driven by the abundant production of methyl sulphides (dimethyl sulphide and methanethiol) in euxinic or H2S-rich seawaters that were widespread in Proterozoic continental margins. In this convergence zone, methyl sulphides served as a non-competitive substrate supporting methane generation and methanethiol inhibited anaerobic oxidation of methane, resulting in the buildup of CH4, formation of degassing cracks in sediments and an increase in the benthic methane flux from sediments. Precipitation of crack-filling microspar was driven by methanogenesis-related alkalinity accumulation. Deep ocean ventilation and oxygenation around 750 Ma brought molar tooth structures to an end.

  15. A Neanderthal lower molar from Stajnia Cave, Poland.

    PubMed

    Dąbrowski, P; Nowaczewska, W; Stringer, C B; Compton, T; Kruszyński, R; Nadachowski, A; Stefaniak, K; Urbanowski, M

    2013-04-01

    The primary aim of this study was to conduct a taxonomic assessment of the second of three isolated human teeth found in the Stajnia Cave (north of the Carpathians, Poland) in 2008. The specimen was located near a human tooth (S5000), which was identified by Urbanowski et al. (2010) as a Neanderthal permanent upper molar. Both of these teeth were excavated from the D2 layer, which belongs to the D stratigraphic complex comprising the archaeological assemblage associated with the Micoquian tradition. An Ursus spelaeus bone and Mammuthus primigenius tooth that were also excavated from the D2 layer were dated to >49,000 years BP (by AMS (14)C) and 52.9 ka BP (by U-Th), respectively. The sediment overlying stratigraphic complex D was dated to 45.9 ka BP by the OSL method. The S4300 tooth is a lower first or second permanent molar belonging to an individual other than that who once possessed the S5000 tooth. The S4300 tooth exhibits a combination of traits typical of Neanderthal lower molars, including a mid-trigonid crest, large anterior fovea, taurodontism and subvertical grooves on the interproximal face, indicating that this tooth belonged to a Neanderthal individual. The S4300 tooth from Stajnia Cave is one of the oldest human remains found in Poland.

  16. The Use of Narrow Diameter Implants in the Molar Area

    PubMed Central

    Saad, M.; Assaf, A.; Gerges, E.

    2016-01-01

    Implant rehabilitations in the posterior jaw are influenced by many factors such as the condition of the remaining teeth, the force factors related to the patient, the quality of the bone, the maintenance of the hygiene, the limited bone height, the type and extent of edentulism, and the nature of the opposing arch. The gold standard is to place a regular diameter implant (>3.7 mm) or a wide one to replace every missing molar. Unfortunately, due to horizontal bone resorption, this option is not possible without lateral bone augmentation. In this situation, narrow diameter implant (NDI < 3.5 mm) could be the alternative to lateral bone augmentation procedures. This paper presents a clinical study where NDIs were used for the replacement of missing molars. They were followed up to 11 years. Special considerations were observed and many parameters were evaluated. NDI could be used to replace missing molar in case of moderate horizontal bone resorption if strict guidelines are respected. Yet, future controlled prospective clinical trials are required to admit their use as scientific evidence. PMID:27293436

  17. 3-D diagnosis-assisted management of anomalous mandibular molar

    PubMed Central

    Mittal, Neelam; Narang, Isha

    2012-01-01

    This case report describes the successful non-surgical endodontic management of carious exposed three-rooted mandibular molar with four root canals detected on the pre-operative radiograph taken with 20 degrees mesial angulation and confirmed with a 64-slice helical computed tomography scan-assisted 3-D-reconstructed images. Access cavity shape was modified to locate the extra canal with respect to the distolingual root in the left mandibular first molar. Copious irrigation was accomplished with 5.25% sodium hypochlorite and 17% EDTA. Biomechanical preparation was done using protapers. Calcium hydroxide dressing was done for 1 week. The tooth was obturated using gutta percha and AH 26 root canal sealer, and it was permanently restored with composite. Clinical examination on follow-up visits revealed no sensitivity to percussion and palpation in the left mandibular first molar. Thorough knowledge of root canal variations and use of advanced diagnostic modalities lead to successful non-surgical management of the complex cases. PMID:22629067

  18. An odontometric study of the maxillary molars in Australian marsupials. I. The koala (Phascolarctos cinereus).

    PubMed

    Ueno, Ryuji; Iimura, Akira; Yoshida, Shunji; Kondo, Kenji; Sato, Iwao; Henneberg, Maciej; Townsend, Grant C

    2010-02-01

    Crown dimensions of the maxillary molars were measured in the koala (Phascolarctos cinereus). There were no significant differences in crown diameters between the first and second molars, however the fourth molars were reduced in all crown diameters. The third molar was smaller than the first or second molars in buccolingual crown diameters but there were no significant differences in mesiodistal crown diameters. It is proposed that the similar shapes of the first and second molars are associated with similar types of masticatory activity involving these teeth, The shape of the third molar, which is reduced in size buccolingually, may be linked to the koala's occlusal function which is characterized by a condylar action that leads to differences in movement between opposing anterior and posterior molar teeth during the occlusal stroke. The fourth molar, the smallest of the molar teeth in crown diameter, erupts significantly later than the other molars, and its reduction may be explained by the terminal and distal reduction theories. It is proposed that the pattern of molar morphology in the koala is associated with both masticatory activity linked to its characteristic occlusal function, as well as reflecting the sequence of tooth emergence.

  19. The origin of the lower fourth molar in canids, inferred by individual variation

    PubMed Central

    2016-01-01

    Background An increase in tooth number is an exception during mammalian evolution. The acquisition of the lower fourth molar in the bat-eared fox (Otocyon megalotis, Canidae, Carnivora, Mammalia) is one example; however, its developmental origin is not clear. In some canids (Canidae), individual variation exist as supernumerary molar M4. This study focuses on the acquisition of the lower fourth molar in canids and proposes that the inhibitory cascade model can explain its origin. Methods Occlusal view projected area of lower molars was determined from 740 mandibles obtained from Canis latrans, Nyctereutes procyonoides, and Urocyon cinereoargenteus museum specimens. For each molar, relative sizes of molars (M2/M1 and M3/M1 scores) affected by inhibition/activation dynamics during development, were compared between individuals with and without supernumerary molar (M4). Results Possession of a supernumerary molar was associated with significantly larger M2/M1 score in Canis latrans, M3/M1 score in Nyctereutes procyonoides, and M2/M1 and M3/M1 scores in Urocyon cinereoargenteus compared to individuals of these species that lacked supernumerary molars. Discussion We propose that, in canids, the supernumerary fourth molar is attributable to reduced inhibition and greater activation during molar development. In the bat-eared fox, altered inhibition and activation dynamics of dental development during omnivorous-insectivorous adaptation may be a contributing factor in the origin of the lower fourth molar. PMID:27843722

  20. Sub-10-Minute Characterization of an Ultrahigh Molar Mass Polymer by Multi-detector Hydrodynamic Chromatography

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Molar mass averages, distributions, and architectural information of polymers are routinely obtained using size-exclusion chromatography (SEC). It has previously been shown that ultrahigh molar mass polymers may experience degradation during SEC analysis, leading to inaccurate molar mass averages a...

  1. Molar Mass and Second Virial Coefficient of Polyethylene Glycol by Vapor Pressure Osmometry

    ERIC Educational Resources Information Center

    Schwinefus, Jeffrey J.; Checkal, Caleb; Saksa, Brian; Baka, Nadia; Modi, Kalpit; Rivera, Carlos

    2015-01-01

    In this laboratory experiment, students determine the number-average molar masses and second virial coefficients of polyethylene glycol (PEG) polymers ranging in molar mass from 200 to 1500 g mol[superscript -1] using vapor pressure osmometry (VPO). Students assess VPO in relation to accurate molar mass calculations of PEG polymers. Additionally,…

  2. Phenomenology and psychopathology of excessive indoor tanning.

    PubMed

    Petit, Aymeric; Karila, Laurent; Chalmin, Florence; Lejoyeux, Michel

    2014-06-01

    Excessive indoor tanning, defined by the presence of an impulse towards and repetition of tanning that leads to personal distress, has only recently been recognized as a psychiatric disorder. This finding is based on the observations of many dermatologists who report the presence of addictive relationships with tanning salons among their patients despite being given diagnoses of malignant melanoma. This article synthesizes the existing literature on excessive indoor tanning and addiction to investigate possible associations. This review focuses on the prevalence, clinical features, etiology, and treatment of this disorder. A literature review was conducted, using PubMed, Google Scholar, EMBASE and PsycINFO, to identify articles published in English from 1974 to 2013. Excessive indoor tanning may be related to addiction, obsessive-compulsive disorder, impulse control disorder, seasonal affective disorder, anorexia, body dysmorphic disorder, or depression. Excessive indoor tanning can be included in the spectrum of addictive behavior because it has clinical characteristics in common with those of classic addictive disorders. It is frequently associated with anxiety, eating disorders, and tobacco dependence. Further controlled studies are required, especially in clinical psychopathology and neurobiology, to improve our understanding of excessive indoor tanning.

  3. Patient with oligodontia treated with a miniscrew for unilateral mesial movement of the maxillary molars and alignment of an impacted third molar.

    PubMed

    Maeda, Aya; Sakoguchi, Yoko; Miyawaki, Shouichi

    2013-09-01

    This report describes the treatment of a 20-year-old woman with a dental midline deviation and 7 congenitally missing premolars. She had retained a maxillary right deciduous canine and 4 deciduous second molars, and she had an impacted maxillary right third molar. The maxillary right deciduous second molar was extracted, and the space was nearly closed by mesial movement of the maxillary right molars using an edgewise appliance and a miniscrew for absolute anchorage. The miniscrew was removed, and the extraction space of the maxillary right deciduous canine was closed, correcting the dental midline deviation. After the mesial movement of the maxillary right molars, the impacted right third molar was aligned. To prevent root resorption, the retained left deciduous second molars were not aligned by the edgewise appliance. The occlusal contact area and the maximum occlusal force increased over the 2 years of retention. The miniscrew was useful for absolute anchorage for unilateral mesial movement of the maxillary molars and for the creation of eruption space and alignment of the impacted third molar in a patient with oligodontia.

  4. 40 CFR Table 1 to Subpart Ja of... - Molar Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Content of Fuel Gas Constituents 1 Table 1 to Subpart Ja of Part 60 Protection of Environment... Exhaust Volumes and Molar Heat Content of Fuel Gas Constituents Constituent MEVa dscf/mol MHCb Btu/mol Methane (CH4) 7.29 842 Ethane (C2H6) 12.96 1,475 Hydrogen (H2) 1.61 269 Ethene (C2H4) 11.34 1,335...

  5. Well Ordered Melts from Low Molar Mass Pluronic Copolymers Blended with Poly (acrylic acid): Effect of Homopolymer Molar Mass

    NASA Astrophysics Data System (ADS)

    Daga, Vikram; Tirumala, Vijay; Romang, Alvin; Lin, Eric; Watkins, James

    2008-03-01

    The use of short chain block copolymer melts as nanostructured templates is often limited by their low segregation strength (χN). Since increasing molar mass to strengthen segregation also increases the interdomain spacing, it is more desirable to increase the segment-segment interaction parameter, χ to produce strong segregation. We have recently shown that block copolymer melts with a molar mass less than 15 kg/mol undergo disorder-to-order transition without a significant increase in interdomain spacing when blended with a selectively associating homopolymer, due to an apparent increase in effective χ. Here, we study the effect of homopolymer molar mass on the segregation of a disordered poly (oxyethylene-oxypropylene-oxyethylene) copolymer melt that forms lamellar microstructure in the ordered phase. Based on small-angle scattering measurements, we find that the melts remain ordered over a broad range of homopolymer chain lengths, ranging up to ten times that of the copolymer. This approach has many implications for the use of commodity block copolymer surfactants as inexpensive nanostructured templates for commercial applications.

  6. Excess Electron Localization in Solvated DNA Bases

    SciTech Connect

    Smyth, Maeve; Kohanoff, Jorge

    2011-06-10

    We present a first-principles molecular dynamics study of an excess electron in condensed phase models of solvated DNA bases. Calculations on increasingly large microsolvated clusters taken from liquid phase simulations show that adiabatic electron affinities increase systematically upon solvation, as for optimized gas-phase geometries. Dynamical simulations after vertical attachment indicate that the excess electron, which is initially found delocalized, localizes around the nucleobases within a 15 fs time scale. This transition requires small rearrangements in the geometry of the bases.

  7. Photoreceptor damage following exposure to excess riboflavin.

    PubMed

    Eckhert, C D; Hsu, M H; Pang, N

    1993-12-15

    Flavins generate oxidants during metabolism and when exposed to light. Here we report that the photoreceptor layer of retinas from black-eyed rats is reduced in size by a dietary regime containing excess riboflavin. The effect of excess riboflavin was dose-dependent and was manifested by a decrease in photoreceptor length. This decrease was due in part to a reduction in the thickness of the outer nuclear layer, a structure formed from stacked photoreceptor nuclei. These changes were accompanied by an increase in photoreceptor outer segment autofluorescence following illumination at 328 nm, a wavelength that corresponds to the excitation maxima of oxidized lipopigments of the retinal pigment epithelium.

  8. Excess Sodium Tetraphenylborate and Intermediates Decomposition Studies

    SciTech Connect

    Barnes, M.J.

    1998-12-07

    The stability of excess amounts of sodium tetraphenylborate (NaTPB) in the In-Tank Precipitation (ITP) facility depends on a number of variables. Concentration of palladium, initial benzene, and sodium ion as well as temperature provide the best opportunities for controlling the decomposition rate. This study examined the influence of these four variable on the reactivity of palladium-catalyzed sodium tetraphenylborate decomposition. Also, single effects tests investigated the reactivity of simulants with continuous stirring and nitrogen ventilation, with very high benzene concentrations, under washed sodium concentrations, with very high palladium concentrations, and with minimal quantities of excess NaTPB.

  9. Mandibular alveolar neurovascular bundle injury associated with impacted third molar surgery.

    PubMed

    Ruga, Emanuele; Gallesio, Cesare; Boffano, Paolo

    2010-07-01

    Inferior alveolar neurovascular bundle (IANB) injury is one of the most common complications of third molar removal and involves important medicolegal issues. An accurate preoperative radiographic assessment of surgical difficulty is necessary to correctly plan the removal of impacted third molars and to estimate the risk of IANB injury. Therefore, the preoperative knowledge of the exact location of the third molar roots in relation to the mandibular canal is mandatory. A direct contact between the tooth and neurovascular bundle is suggested by a radiotransparent band across the roots of the impacted third molar on panoramic radiograph. We present the management of a patient with IANB damage associated with third molar surgery.

  10. Assessment of the relationship between the maxillary molars and adjacent structures using cone beam computed tomography

    PubMed Central

    Jung, Yun-Hoa

    2012-01-01

    Purpose This study investigated the relationship between the roots of the maxillary molars and the maxillary sinus using cone beam computed tomography (CBCT), and measured the distances between the roots of the maxillary molars and the sinus floor as well as the thickness of the bone between the root and the alveolar cortical plate. Materials and Methods The study sample consisted of 83 patients with normally erupted bilateral maxillary first and second molars. A total of 332 maxillary molars were examined using CBCT images. The vertical relationship of each root with the maxillary sinus was classified into four types on CBCT cross-sectional images. The distance between the sinus floor and root and the bone thickness between the root and alveolar cortical plate were measured. Results In the buccal roots of the maxillary molars, a root protruding into the sinus occurred most frequently. A root projecting laterally along the sinus cavity was most common in the palatal roots of the maxillary first molars. The mesiobuccal roots of the maxillary second molar were closest to the sinus. The mesiobuccal roots of the first molars were closest to the cortical plate. Conclusion The relationship between the roots of the maxillary molars and the sinus differed between the buccal and palatal roots. A root protruding into the sinus occurred more frequent in the buccal roots of the maxillary molars. The mesiobuccal root of the maxillary second molar was closest to the maxillary sinus floor and farthest from the alveolar cortical plate. PMID:23301207

  11. Compensation trends of the angulation of first molars: retrospective study of 1 403 malocclusion cases

    PubMed Central

    Su, Hong; Han, Bing; Li, Sa; Na, Bin; Ma, Wen; Xu, Tian-Min

    2014-01-01

    We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged <12 years and least distally in cases aged >16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability. PMID:24699185

  12. The effects and underlying mechanism of excessive iodide on excessive fluoride-induced thyroid cytotoxicity.

    PubMed

    Liu, Hongliang; Zeng, Qiang; Cui, Yushan; Yu, Linyu; Zhao, Liang; Hou, Changchun; Zhang, Shun; Zhang, Lei; Fu, Gang; Liu, Yeming; Jiang, Chunyang; Chen, Xuemin; Wang, Aiguo

    2014-07-01

    In many regions, excessive fluoride and excessive iodide coexist in groundwater, which may lead to biphasic hazards to human thyroid. To explore fluoride-induced thyroid cytotoxicity and the mechanism underlying the effects of excessive iodide on fluoride-induced cytotoxicity, a thyroid cell line (Nthy-ori 3-1) was exposed to excessive fluoride and/or excessive iodide. Cell viability, lactate dehydrogenase (LDH) leakage, reactive oxygen species (ROS) formation, apoptosis, and the expression levels of inositol-requiring enzyme 1 (IRE1) pathway-related molecules were detected. Fluoride and/or iodide decreased cell viability and increased LDH leakage and apoptosis. ROS, the expression levels of glucose-regulated protein 78 (GRP78), IRE1, C/EBP homologous protein (CHOP), and spliced X-box-binding protein-1 (sXBP-1) were enhanced by fluoride or the combination of the two elements. Collectively, excessive fluoride and excessive iodide have detrimental influences on human thyroid cells. Furthermore, an antagonistic interaction between fluoride and excessive iodide exists, and cytotoxicity may be related to IRE1 pathway-induced apoptosis.

  13. Enamel pits in hamster molars, formed by a single high fluoride dose, are associated with a perturbation of transitional stage ameloblasts

    PubMed Central

    Lyaruu, D.M.; Vermeulen, L.; Stienen, N.; Bervoets, T.J.M.; DenBesten, P.K.; Bronckers, A.L.J.J.

    2013-01-01

    Excessive intake of fluoride (F) by young children results in formation of enamel subsurface porosities and pits, called enamel fluorosis. In this study, we used a single high dose of fluoride administered to hamster pups, to determine the stage of ameloblasts most affected by fluoride, and whether pit formation was related to F-related sub-ameloblastic cyst formation. Hamster pups received a single subcutaneous injection of either 20 mg or 40 mg NaF/kg body weights, were sacrificed 24 h later, and the number of cysts formed in the first molars counted. Other pups were sacrificed 8 days after F-injection when the first molars had just erupted, to score for enamel defects. All F-injected pups formed enamel defects in the upper half of the cusps in a dose-dependent way. After injection of 20 mg NaF/kg an average of 2.2 white spots per molar was found but no pits. At 40 mg NaF/kg, almost 4.5 spots per molar were counted as well as 2 pits per molar. The defects in erupted enamel were located in the upper half of the cusps, sites where cysts had formed at the transition stage of ameloblast differentiation. These results suggest that transitional ameloblasts, located between secretory and maturation stage ameloblasts, are most sensitive to the effects of a single high dose of fluoride. Fluoride- induced cysts formed earlier at the pre-secretory stage were not correlated to either white spots or enamel pits, suggesting that damaged ameloblasts overlying a fluoride induced cyst regenerate and continue to form enamel. PMID:22947666

  14. Correlation of Third Molar Status with Incidence of Condylar and Angle Fractures.

    PubMed

    Menon, Suresh; Kumar, Veerendra; V, Srihari; Priyadarshini, Yogitha

    2016-09-01

    The mandibular angle and condylar regions are most prone to fractures and this has been attributed to the presence/absence or the position of the third molars. This retrospective study was undertaken to analyze the correlation between the third molars and incidence of condylar and angle fractures in 104 patients treated for these fractures during the period from June 2009 to December 2013. Clinical and radiographic records of these patients were studied to look for the presence and position of third molars and their relation to incidence of condylar or angle fractures. There was a definite positive relation to impacted third molars and increased incidence of angle fractures. The condylar fractures were more commonly seen when the third molars were fully erupted or missing. Third molar impactions predispose to angle fractures and missing or fully erupted third molars predispose to condylar fractures.

  15. Peri-operative second molar tube failure during orthognathic surgery: two case reports.

    PubMed

    Wenger, N A; Atack, N E; Mitchell, C N; Ireland, A J

    2007-06-01

    With improvements in bonding techniques, bracket base design and bond strengths, molar tubes are becoming more popular in orthodontics. Molar tubes make an attractive alternative to conventional banding due to a reduction in clinical bonding time and ease of placement on partially erupted teeth. The use of molar tubes negates the need for orthodontic separation and subsequent cementation of bands, and offers improved periodontal health. Their use on terminal molars, however, should be limited to non-orthognathic cases. This paper presents two cases of peri-operative second molar tube failure during orthognathic surgery. They are presented in the hope that it will highlight the importance of banding the distal terminal molar in orthognathic cases to prevent loss of molar tubes and peri-operative contamination of the surgical wound site.

  16. [Conservative and surgical treatment of convergence excess].

    PubMed

    Ehrt, O

    2016-07-01

    Convergence excess is a common finding especially in pediatric strabismus. A detailed diagnostic approach has to start after full correction of any hyperopia measured in cycloplegia. It includes measurements of manifest and latent deviation at near and distance fixation, near deviation after relaxation of accommodation with addition of +3 dpt, assessment of binocular function with and without +3 dpt as well as the accommodation range. This diagnostic approach is important for the classification into three types of convergence excess, which require different therapeutic approaches: 1) hypo-accommodative convergence excess is treated with permanent bifocal glasses, 2) norm-accommodative patients should be treated with bifocals which can be weaned over years, especially in patients with good stereopsis and 3) non-accommodative convergence excess and patients with large distance deviations need a surgical approach. The most effective operations include those which reduce the muscle torque, e. g. bimedial Faden operations or Y‑splitting of the medial rectus muscles.

  17. Excess capacity: markets regulation, and values.

    PubMed Central

    Madden, C W

    1999-01-01

    OBJECTIVE: To examine the conceptual bases for the conflicting views of excess capacity in healthcare markets and their application in the context of today's turbulent environment. STUDY SETTING: The policy and research literature of the past three decades. STUDY DESIGN: The theoretical perspectives of alternative economic schools of thought are used to support different policy positions with regard to excess capacity. Changes in these policy positions over time are linked to changes in the economic and political environment of the period. The social values implied by this history are articulated. DATA COLLECTION: Standard library search procedures are used to identify relevant literature. PRINCIPAL FINDINGS: Alternative policy views of excess capacity in healthcare markets rely on differing theoretical foundations. Changes in the context in which policy decisions are made over time affect the dominant theoretical framework and, therefore, the dominant policy view of excess capacity. CONCLUSIONS: In the 1990s, multiple perspectives of optimal capacity still exist. However, our evolving history suggests a set of persistent values that should guide future policy in this area. PMID:10029502

  18. ESTIMATING EXCESS DIETARY EXPOSURES OF YOUNG CHILDREN

    EPA Science Inventory

    Nine children in a daycare that routinely applied the pesticide, esfenvalerate, were studied to assess excess dietary exposures. Surface wipes, a standard food item of processed American cheese slice pressed on the surface and handled by the child, an accelerometer reading, and ...

  19. 34 CFR 668.166 - Excess cash.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Cash Management § 668.166 Excess cash. (a... than Federal Perkins Loan Program funds, that an institution does not disburse to students or parents... funds that an institution receives from the Secretary under the just-in-time payment method. (b)...

  20. 24 CFR 236.60 - Excess Income.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES MORTGAGE... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Excess Income. 236.60 Section 236.60 Housing and Urban Development Regulations Relating to Housing and Urban Development...

  1. Low excess air operations of oil boilers

    SciTech Connect

    Butcher, T.A.; Celebi, Y.; Litzke, Wai Lin

    1997-09-01

    To quantify the benefits which operation at very low excess air operation may have on heat exchanger fouling BNL has recently started a test project. The test allows simultaneous measurement of fouling rate, flue gas filterable soot, flue gas sulfuric acid content, and flue gas sulfur dioxide.

  2. Excessive Interviews: Listening to Maternal Subjectivity

    ERIC Educational Resources Information Center

    Willink, Kate

    2010-01-01

    In this article, the author revisits an interview with Ava Montalvo--a mother of two living in Albuquerque, New Mexico--which initially confounded her interpretive resources. This reflexive, performative article examines the role of excess as an analytical lens through which to understand maternal subjectivity and elaborates the methodological…

  3. Can Excess Bilirubin Levels Cause Learning Difficulties?

    ERIC Educational Resources Information Center

    Pretorius, E.; Naude, H.; Becker, P. J.

    2002-01-01

    Examined learning problems in South African sample of 7- to 14-year-olds whose mothers reported excessively high infant bilirubin shortly after the child's birth. Found that this sample had lowered verbal ability with the majority also showing impaired short-term and long-term memory. Findings suggested that impaired formation of astrocytes…

  4. Controlled expedient disposal of excess gun propellant.

    PubMed

    Walsh, M R; Thiboutot, S; Walsh, M E; Ampleman, G

    2012-06-15

    The expedient field disposal of excess gun propellants on the ground is an integral part of live-fire training in many countries. However, burning excess propellant in the field will leave significant quantities of energetic residues and heavy metals in the environment. Compounds such as dinitrotoluene and nitroglycerin and metals such as lead will leach into the soil column, eventually migrating to groundwater. Contamination of the environment will lead to high remediation costs and the possible loss of the training facility. After investigating the contamination at several propellant disposal sites, a portable propellant burn pan was developed and tested. The pan was transported to training sites where excess propellant was loaded and burned in a controlled manner. Up to 120 kg of excess single-base propellant charges have been burned during two series of tests at a consumption rate of greater than 99.9%. Less than 0.03% of the energetic material was recovered outside the burn pan. Recovered lead is largely contained within the pan. The turnover rate for burns is 15 min. The residues can be collected following cool-down for proper disposal.

  5. 7 CFR 955.44 - Excess funds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Excess funds. 955.44 Section 955.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN...

  6. 7 CFR 955.44 - Excess funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess funds. 955.44 Section 955.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN...

  7. 7 CFR 956.44 - Excess funds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Excess funds. 956.44 Section 956.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA...

  8. 7 CFR 955.44 - Excess funds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Excess funds. 955.44 Section 955.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN...

  9. 7 CFR 955.44 - Excess funds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Excess funds. 955.44 Section 955.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN...

  10. 7 CFR 956.44 - Excess funds.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Excess funds. 956.44 Section 956.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA...

  11. 7 CFR 955.44 - Excess funds.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Excess funds. 955.44 Section 955.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN...

  12. 7 CFR 956.44 - Excess funds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Excess funds. 956.44 Section 956.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA...

  13. 7 CFR 956.44 - Excess funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess funds. 956.44 Section 956.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA...

  14. 7 CFR 956.44 - Excess funds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Excess funds. 956.44 Section 956.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE SWEET ONIONS GROWN IN THE WALLA...

  15. Central Greenland Holocene Deuterium Excess Variability

    NASA Astrophysics Data System (ADS)

    Masson-Delmotte, V.; Jouzel, J.; Falourd, S.; Cattani, O.; Dahl-Jensen, D.; Johnsen, S.; Sveinbjornsdottir, A. E.; White, J. W. C.

    Water stable isotopes (oxygen 18 and deuterium) have been measured along the Holocene part of two deep ice cores from central Greenland, GRIP and North GRIP. Theoretical studies have shown that the second-order isotopic parameter, the deu- terium excess (d=dD-8d18O), is an indicator of climatic changes at the oceanic mois- ture source reflecting at least partly changes in sea-surface-temperature. The two deu- terium excess records from GRIP and North GRIP show a long term increasing trend already observed in Antarctic deep ice cores and related to changes in the Earth's obliquity during the Holocene : an decreased obliquity is associated with a larger low to high latitude annual mean insolation gradient, warmer tropics, colder poles, and a more intense atmospheric transport from the tropics to the poles, resulting in a higher moisture source temperature and higher deuterium excess values. Superimposed onto this long term trend, central Greenland deuterium excess records also exhibit small abrupt events (8.2 ka BP and 4.5 ka BP) and a high frequency variability.

  16. Why Excess Immigration Damages the Environment.

    ERIC Educational Resources Information Center

    Population-Environment Balance

    1992-01-01

    Explores the relationship between excessive immigration and environmental degradation. Explains the position that a stable United States population size is essential in prevention further deterioration of the natural resource base. Maintains that balancing immigration and emigration will be instrumental in balancing population with environment.…

  17. Search for excess showers from Crab Nebula

    NASA Technical Reports Server (NTRS)

    Kirov, I. N.; Stamenov, J. N.; Ushev, S. Z.; Janminchev, V. D.; Aseikin, V. S.; Nikolsky, S. I.; Nikolskaja, N. M.; Yakovlev, V. I.; Morozov, A. E.

    1985-01-01

    The arrival directions of muon poor showers registrated in the Tien Shan experiment during an effective running time about I,8.IO(4)h were analyzed. It is shown that there is a significant excess of these showers coming the direction of Crab Nebula.

  18. 34 CFR 300.16 - Excess costs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Excess costs. 300.16 Section 300.16 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN...

  19. 34 CFR 300.16 - Excess costs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false Excess costs. 300.16 Section 300.16 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN...

  20. 7 CFR 966.44 - Excess funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Excess funds. 966.44 Section 966.44 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA...

  1. Excess Sodium Tetraphenylborate and Intermediates Decomposition Studies

    SciTech Connect

    Barnes, M.J.; Peterson , R.A.

    1998-04-01

    The stability of excess amounts of sodium tetraphenylborate (NaTPB) in the In-Tank Precipitation (ITP) facility depends on a number of variables. Concentration of palladium, initial benzene, and sodium ion as well as temperature provide the best opportunities for controlling the decomposition rate. This study examined the influence of these four variables on the reactivity of palladium-catalyzed sodium tetraphenylborate decomposition. Also, single effects tests investigated the reactivity of simulants with continuous stirring and nitrogen ventilation, with very high benzene concentrations, under washed sodium concentrations, with very high palladium concentrations, and with minimal quantities of excess NaTPB. These tests showed the following.The testing demonstrates that current facility configuration does not provide assured safety of operations relative to the hazards of benzene (in particular to maintain the tank headspace below 60 percent of the lower flammability limit (lfl) for benzene generation rates of greater than 7 mg/(L.h)) from possible accelerated reaction of excess NaTPB. Current maximal operating temperatures of 40 degrees C and the lack of protection against palladium entering Tank 48H provide insufficient protection against the onset of the reaction. Similarly, control of the amount of excess NaTPB, purification of the organic, or limiting the benzene content of the slurry (via stirring) and ionic strength of the waste mixture prove inadequate to assure safe operation.

  2. Patterning by heritage in mouse molar row development.

    PubMed

    Prochazka, Jan; Pantalacci, Sophie; Churava, Svatava; Rothova, Michaela; Lambert, Anne; Lesot, Hervé; Klein, Ophir; Peterka, Miroslav; Laudet, Vincent; Peterkova, Renata

    2010-08-31

    It is known from paleontology studies that two premolars have been lost during mouse evolution. During mouse mandible development, two bud-like structures transiently form that may represent rudimentary precursors of the lost premolars. However, the interpretation of these structures and their significance for mouse molar development are highly controversial because of a lack of molecular data. Here, we searched for typical tooth signaling centers in these two bud-like structures, and followed their fate using molecular markers, 3D reconstructions, and lineage tracing in vitro. Transient signaling centers were indeed found to be located at the tips of both the anterior and posterior rudimentary buds. These centers expressed a similar set of molecular markers as the "primary enamel knot" (pEK), the signaling center of the first molar (M1). These two transient signaling centers were sequentially patterned before and anterior to the M1 pEK. We also determined the dynamics of the M1 pEK, which, slightly later during development, spread up to the field formerly occupied by the posterior transient signaling center. It can be concluded that two rudimentary tooth buds initiate the sequential development of the mouse molars and these have previously been mistaken for early stages of M1 development. Although neither rudiment progresses to form an adult tooth, the posterior one merges with the adjacent M1, which may explain the anterior enlargement of the M1 during mouse family evolution. This study highlights how rudiments of lost structures can stay integrated and participate in morphogenesis of functional organs and help in understanding their evolution, as Darwin suspected long ago.

  3. Etiology, Diagnosis, Consequences and Treatment of Infraoccluded Primary Molars

    PubMed Central

    Arhakis, Aristidis; Boutiou, Eirini

    2016-01-01

    Infraocclusion is a condition where teeth are found with their occlusal surface below the adjacent teeth, long after they should have reached occlusion. Many terms have been used to describe this condition; the most commonly used being submergence and ankylosis. Infraocclusion is classified as slight, moderate or severe. Studies have shown the commonness ratio of infraocclusion in kids being 1.3-8.9% with an equal male: female ratio. The frequency of infraocclusion of primary molars of mandible is 10-fold higher in contrast to those of the maxilla. Some studies showed that the first mandibular primary molars are most often affected, but others support the second one. Infraoccluded primary molars appear with an increase in 3 year-old children reaching a peak in 8-9 years of age. The main cause is ankylosis, followed by heredity, trauma, infection and various other theories. However, the etiology is still uncertain. Radiographically, an obliteration of the periodontal ligament can be seen using conventional methods and the CT-method can also be used to reveal greater detail. Clinically, other than submersion, a sharp, solid sound is heard on percussion, in contrast to a softer sound in the normal teeth. Infraoccluded primary teeth can cause occlusal disturbances, tilting of the adjacent teeth, supra-eruption of the antagonists, ectopic eruption or impaction of the successor premolars. A treatment decision must take into account whether there is a permanent successor or not. In the first case, patient monitoring is recommended, because these primary teeth usually exfoliate normally. However, in the second case, the therapeutic approach is not standard. The aim of this review of literature was to elucidate the available evidence concerning infraocclusion, its etiology, diagnosis, clinical characteristics, consequences and treatment. PMID:28217186

  4. Patterning by heritage in mouse molar row development

    PubMed Central

    Prochazka, Jan; Pantalacci, Sophie; Churava, Svatava; Rothova, Michaela; Lambert, Anne; Lesot, Hervé; Klein, Ophir; Peterka, Miroslav; Laudet, Vincent; Peterkova, Renata

    2010-01-01

    It is known from paleontology studies that two premolars have been lost during mouse evolution. During mouse mandible development, two bud-like structures transiently form that may represent rudimentary precursors of the lost premolars. However, the interpretation of these structures and their significance for mouse molar development are highly controversial because of a lack of molecular data. Here, we searched for typical tooth signaling centers in these two bud-like structures, and followed their fate using molecular markers, 3D reconstructions, and lineage tracing in vitro. Transient signaling centers were indeed found to be located at the tips of both the anterior and posterior rudimentary buds. These centers expressed a similar set of molecular markers as the “primary enamel knot” (pEK), the signaling center of the first molar (M1). These two transient signaling centers were sequentially patterned before and anterior to the M1 pEK. We also determined the dynamics of the M1 pEK, which, slightly later during development, spread up to the field formerly occupied by the posterior transient signaling center. It can be concluded that two rudimentary tooth buds initiate the sequential development of the mouse molars and these have previously been mistaken for early stages of M1 development. Although neither rudiment progresses to form an adult tooth, the posterior one merges with the adjacent M1, which may explain the anterior enlargement of the M1 during mouse family evolution. This study highlights how rudiments of lost structures can stay integrated and participate in morphogenesis of functional organs and help in understanding their evolution, as Darwin suspected long ago. PMID:20709958

  5. [Molar incisor hypomineralization (MIH)--a literature review].

    PubMed

    Gotler, M; Ratson, T

    2010-04-01

    MIH was defined by Weerheijm (2001) as "hypomineralisation of systemic origin of 1-4 permanent first molars, frequently associated with affected incisors". The prevalence of MIH varies between 2.8% and 25%, dependent upon the study. At their sixth congress in 2003, The European Association of pediatric dentistry defined criteria for diagnosis of the phenomena. It included the presence of demarcated opacity, posteruptive enamel breakdown, atypical restoration, extracted molar due to MIH and unerupted teeth. According to the teeth involved and to the time of the crown formation, researches focused on environmental and systemic conditions as possible reasons for MIH.The etiologies were divided into five groups: Exposure to environmental contaminants, pre/peri and neonatal problems, exposure to fluoride, common childhood illnesses and medically compromised children. The clinical implications include highly sensitive teeth, difficulty to achieve adequate anesthesia, behavioral problems and anxiety, rapid progression of caries and the esthetic implications. A six step approach to management was described suggested: risk identification, early diagnosis, remineralization and desensitization, prevention of caries and posteruption breakdown, restorations and extractions and finally maintenance. Restoring an affected molar can vary from adhesive intra coronal restorations (resin composite is the material of choice) to extra coronal restorations (e.g. preformed metal crown). Esthetic solutions to affected incisors may include microabrasion (that shows little improvement) and resin composite or porcelain veneer. The key for a successful treatment is early diagnosis, intense follow up and usage of remineralizating agents as soon as the teeth erupt. There is still need for further research to clarify the etiological factors and improve the durability of restoration in affected teeth.

  6. Peripheral facial nerve paralysis after upper third molar extraction.

    PubMed

    Cakarer, Sirmahan; Can, Taylan; Cankaya, Burak; Erdem, Mehmet Ali; Yazici, Sinem; Ayintap, Emre; Özden, Ali Veysel; Keskin, Cengizhan

    2010-11-01

    Peripheral facial nerve paralysis (PFNP) after mandibular interventions has been reported in the literature. In most cases, paralysis begins immediately after the injection of the mandibular anesthesia, and duration of facial weakness is less than 12 hours. However, there are few documented cases of PFNP after maxillary dental or surgical procedures. A variety of mechanisms have been associated to PFNP, including viral reactivation, demyelination, edema, vasospasm, and trauma. The purpose of this presentation was to report a rare case of facial paralysis that occurred after an upper third molar extraction. The cause of the PFNP and the importance of the multidisciplinary approach in the management are emphasized.

  7. Histological evaluation of mandibular third molar roots retrieved after coronectomy.

    PubMed

    Patel, Vinod; Sproat, Chris; Kwok, Jerry; Beneng, Kiran; Thavaraj, Selvam; McGurk, Mark

    2014-05-01

    There is a resurgence of interest in coronectomy for the management of mandibular third molars because it has a low risk of injury to the inferior dental nerve. However, there is concern that the root that is left in place will eventually become a source of infection. We describe the histological evaluation of 26 consecutive symptomatic coronectomy roots in 21 patients. All roots had vital tissue in the pulp chamber and there was no evidence of periradicular inflammation. Persistent postoperative symptoms related predominantly to inflammation of the soft tissue, which was caused by partially erupted roots or failure of the socket to heal.

  8. Ethanol sorption and partial molar volume in cellulose acetate films

    SciTech Connect

    Bolton, B.A.; Kint, S.; Bailey, G.F.; Scherer, J.R.

    1986-03-13

    The absorption characteristics of cellulose acetate (CA398) and cellulose triacetate membranes for ethanol vapor were determined by integrated optical techniques. Changes in the refractive index and film thicknesses are used to calculate the ethanol concentration within the membrane, to calculate the partial molar volume of sorbed ethanol as a function of ethanol concentration, and to estimate the average void volume of the dry film. The refractive index is shown to be very sensitive to the available void space within the membrane. The average total void space for the films considered here was less than 1% of the dry polymer volume. 22 references, 6 figures, 1 table.

  9. Restoration of Endodontically Treated Molars Using All Ceramic Endocrowns

    PubMed Central

    Carlos, Roopak Bose; Thomas Nainan, Mohan; Pradhan, Shamina; Roshni Sharma; Benjamin, Shiny; Rose, Rajani

    2013-01-01

    Clinical success of endodontically treated posterior teeth is determined by the postendodontic restoration. Several options have been proposed to restore endodontically treated teeth. Endocrowns represent a conservative and esthetic restorative alternative to full coverage crowns. The preparation consists of a circular equigingival butt-joint margin and central retention cavity into the entire pulp chamber constructing both the crown and the core as a single unit. The case reports discussed here are moderately damaged endodontically treated molars restored using all ceramic endocrowns fabricated using two different systems, namely, CAD/CAM and pressed ceramic. PMID:24455318

  10. Association between the presence of a partially erupted mandibular third molar and the existence of caries in the distal of the second molars.

    PubMed

    Falci, S G M; de Castro, C R; Santos, R C; de Souza Lima, L D; Ramos-Jorge, M L; Botelho, A M; Dos Santos, C R R

    2012-10-01

    The objective of this study was to verify, using periapical radiographs, whether a partially erupted mandibular third molar is a factor in the presence of dental caries on the distal surface of the adjacent second molar. Two-forty six high quality periapical radiographs were selected, each showing a partially erupted mandibular third molar. The variables analyzed were: tooth number; gender; age; radiographic presence of caries on the distal surface of the adjacent molar; Pell and Gregory classification; Winter classification; angulation and distance between the second and mandibular third molar. The examiners were previously calibrated to collect data (kappa statistics from 0.87 to 1.0). The prevalence rate of caries on the distal surface of the second molar was 13.4%. In the logistical multivariate regression analysis, the angulation (OR=8.5; IC95%: 1.7-43.8; p=0.011) and the gender (OR=3.3; IC95%: 1.4-7.7; p=0.005) remained statistically significant after an age adjustment was made. The results indicate that the presence of a partially erupted mandibular third molar with an angulation of 31 degrees or more, is a risk factor for caries on the distal surface of the mandibular second molars.

  11. Unilateral failure of development of mandibular premolars and molars in an Eastern Grey kangaroo (Macropus giganteus) and its effects on molar progression.

    PubMed

    Barber, D; Campbell, J; Davey, J; Luke, T; Agren, E; Beveridge, I

    2008-01-01

    An adult male Eastern Grey kangaroo from a wildlife reserve near Melbourne was submitted for necropsy examination and was discovered to have abnormal dentition. There was no evidence that any premolars or molars had ever been present on the right mandible, whilst the incisors were normal. The age of the kangaroo was estimated to be 1 year 9 months using the right maxillary molars and 2 years 4 months old using the contralateral side, presumably due to the asymmetry of the dental arcades. 'Lumpy jaw', a common periodontal disease of kangaroos, from which Bacteroides sp was cultured, was present on the base of the vertical ramus of the left mandible. Complete unilateral absence of premolar and molar teeth in the mandible of a kangaroo has not been described. This condition affected molar progression in both sets of maxillary molars.

  12. Effectiveness of a personalized device in the evaluation of mandibular second molar periodontal healing after surgical extraction of adjacent third molar

    PubMed Central

    Pippi, Roberto

    2013-01-01

    Summary Aim The primary aim of the present study was to validate the effectiveness of a personalized device able to guide periodontal probing in evaluation of second molar periodontal healing after adjacent third molar surgical extraction. Secondarily, the study analyzed if any patient and tooth related factors affected the second molar periodontal healing as well as if they were able to affect the periodontal probing depth performed with or without the personalized device. Materials and methods Thirty-five lower second molars were evaluated after extraction of the adjacent third molar. Pre-operative as well as 3 and 12 month post-operative probing depths of the distal surface of the second molar were evaluated. All measurements were taken by two different methods: standard two-point and four-point probing using a personalized onlay-type guide. Periapical radiographs were also evaluated. The Pearson product moment and the general linear model with backward stepwise procedure were used for inferential statistics. Results The mean 12-month post-operative probing depth/mean pre-operative probing depth ratio obtained with the guided probing method showed a highly significant effect on the 12-month radiographic post-operative/pre-operative radiographic measure ratio. None of the examined patient- or tooth-related factors showed a significant effect on pre-operative/12-month post-operative radiographic measure ratio. Conclusions The use of the proposed personalized device seems to provide a more reliable estimate of second molar periodontal healing after adjacent third molar surgical extraction. No patient-or tooth-related factors seem to be able to affect either second molar periodontal healing or probing depth measures obtained with or without the personalized device in individuals younger than 25 years old. It can be therefore recommended that lower third molar surgical extraction be performed in young adults. PMID:24611086

  13. Excess volumes of binary mixtures of 1,3-dichloropropane with isomeric butanols at 298. 15 and 313. 15 K

    SciTech Connect

    Lafuente, C.; Pardo, J.; Rodriguez, V.; Royo, F.M.; Urieta, J.S. . Dept. de Quimica Organica-Quimica Fisica)

    1993-10-01

    Excess molar volumes, V[sub m][sup E], for binary mixtures of 1,3-dichloropropane with 1-butanol, 2-butanol, 2-methyl-1-propanol, and 2-methyl-2-propanol have been determined from density measurements at 298.15 and 313.15 K by means of an Anton Paar DMA-58 vibrating tube densimeter. V[sub m][sup E] is positive over the whole composition range except for mixtures containing 1-butanol and 2-methyl-1-propanol at 298.15 K in which V[sub m][sup E] shows negative values at low mole fractions of dichloroalkane.

  14. Evolutionary novelty in a rat with no molars

    PubMed Central

    Esselstyn, Jacob A.; Achmadi, Anang Setiawan; Rowe, Kevin C.

    2012-01-01

    Rodents are important ecological components of virtually every terrestrial ecosystem. Their success is a result of their gnawing incisors, battery of grinding molars and diastema that spatially and functionally separates the incisors from the molars. Until now these traits defined all rodents. Here, we describe a new species and genus of shrew-rat from Sulawesi Island, Indonesia that is distinguished from all other rodents by the absence of cheek teeth. Moreover, rather than gnawing incisors, this animal has bicuspid upper incisors, also unique among the more than 2200 species of rodents. Stomach contents from a single specimen suggest that the species consumes only earthworms. We posit that by specializing on soft-bodied prey, this species has had no need to process food by chewing, allowing its dentition to evolve for the sole purpose of procuring food. Thus, the removal of functional constraints, often considered a source of evolutionary innovations, may also lead to the loss of the very same traits that fuelled evolutionary diversification in the past. PMID:22915626

  15. Nanomechanical Behavior of Human Molars Soaked in Slight Acid Solutions

    NASA Astrophysics Data System (ADS)

    Fang, Te-Hua; Chang, Win-Jin; Kang, Shao-Hui; Chu, Chia-Chun

    This paper studied the mechanical and chemical properties of hydroxyl apatite (HA) crystal structure in the teeth when human molars were soaked in slight acid solution. First, we soaked the ground and polished molars respectively in the liquor of 30 wt.% H2CO3 and the liquor of 30 wt.% H2O2 for 10, 20, or 60 minutes. Next, we used a nanoindenter to measure the hardness and Young's modulus. Finally, we used a scanning electron microscope (SEM) coupled with energy dispersive spectroscopy (EDS) to analyze the variation of Ca, P and Na in teeth, a high resolution transmitting electron microscope (HRTEM) to observe the arrangement of crystallization phase of HA, and X-ray diffraction (XRD) to analyze the crystallinity of the hexagonal phase of HA. The results showed that the demineralization phenomenon of the calcium-phosphorous compound in teeth made the teeth reduce sharply in hardness and Young's modulus after they were soaked in the two slight acid solutions for 10 minutes, but the re-mineralization phenomenon made the hardness and Young's modulus ascend gradually when the time lasted longer. With the same period of time, the teeth soaked in H2CO3 were lower in the hardness and Young's modulus than that in H2O2.

  16. Maxillary infiltration anaesthesia by ropivacaine for upper third molar surgery.

    PubMed

    Brkovic, B M B; Zlatkovic, M; Jovanovic, D; Stojic, D

    2010-01-01

    The main purpose of this study was to assess the clinical efficacy and haemodynamic effects of ropivacaine for infiltration anaesthesia in patients undergoing surgical removal of upper third molars. The safety profile of ropivacaine was also studied by investigating the maximal venous plasma concentration of ropivacaine and the reactivity to ropivacaine of isolated human infraorbital arteries. Ropivacaine in concentrations of 0.5, 0.75 and 1% achieved dose-dependent parameters of maxillary infiltration aneasthesia, clinically relevant in concentrations 0.75 and 1%. Postoperative needs for analgesics were observed in 67-100% of patients. Haemodynamic parameters were stable during surgery with significant changes occuring 10 min after surgery. After maxillary infiltration of 2.0 ml 1% ropivacaine, the maximum venous plasma concentration (Cmax) was 82+/-15 microg/l. On isolated human infraorbital artery, ropivacaine (10(-4)M) induced endothelium-independent contraction. This study suggests that 0.75 and 1% ropivacaine offers adequate and safe intraoperative analgesia but not successful postoperative pain control for the surgical removal of upper third molars.

  17. Nanoparticle Counting: Towards Accurate Determination of the Molar Concentration

    PubMed Central

    Shang, Jing; Gao, Xiaohu

    2014-01-01

    Summary Innovations in nanotechnology have brought tremendous opportunities for the advancement of many research frontiers, ranging from electronics, photonics, energy, to medicine. To maximize the benefits of nano-scaled materials in different devices and systems, precise control of their concentration is a prerequisite. While concentrations of nanoparticles have been provided in other forms (e.g., mass), accurate determination of molar concentration, arguably the most useful one for chemical reactions and applications, has been a major challenge (especially for nanoparticles smaller than 30 nm). Towards this significant yet chronic problem, a variety of strategies are currently under development. Most of these strategies are applicable to a specialized group of nanoparticles due to their restrictions on the composition and size ranges of nanoparticles. As research and uses of nanomaterials being explored in an unprecedented speed, it is necessary to develop universal strategies that are easy to use, and compatible with nanoparticles of different sizes, compositions, and shapes. This review outlines the theories and applications of current strategies to measure nanoparticle molar concentration, discusses the advantages and limitations of these methods, and provides insights into future directions. PMID:25099190

  18. A comparison of results of second molar and first premolar extraction treatment.

    PubMed

    Staggers, J A

    1990-11-01

    The purpose of this study was to examine treatment results of maxillary and mandibular second molar extraction cases and compare them with treatment results of maxillary and mandibular first-premolar extraction cases. Records of 22 maxillary and mandibular second-molar extraction cases and 22 maxillary and mandibular first-premolar extraction cases were evaluated. For each case, pretreatment and posttreatment lateral cephalograms were traced and several cephalometric parameters were compared. From the pretreatment and posttreatment panoramic radiographs, angulations of the maxillary and mandibular third molars were evaluated. Average treatment time, in months, was recorded for both groups. The data obtained from each group were analyzed for statistical difference. The results showed that the two groups had fewer differences than indicated by advocates of second-molar extractions. Analysis of the cephalometric data demonstrated only a few statistical differences between the groups. The maxillary and mandibular incisors in the premolar group were retracted a significantly greater amount than in the second-molar group. The maxillary and mandibular first molars were protracted a greater amount in the premolar group than in the second-molar group. The lower lips in the premolar group were retracted a greater amount than in the second-molar group. The resulting facial profile after extraction of second-molars appears to be no different from that obtained after extraction of first premolars. The pantographic evaluation of the changes in third-molar angulation were not statistically different. In both groups, the maxillary third molars showed an improvement in third-molar angulation, while the mandibular third-molars showed an undesirable increase in angulation. The average treatment time for both groups was not statistically different.

  19. Predictive factors of excessive online poker playing.

    PubMed

    Hopley, Anthony A B; Nicki, Richard M

    2010-08-01

    Despite the widespread rise of online poker playing, there is a paucity of research examining potential predictors for excessive poker playing. The aim of this study was to build on recent research examining motives for Texas Hold'em play in students by determining whether predictors of other kinds of excessive gambling apply to Texas Hold'em. Impulsivity, negative mood states, dissociation, and boredom proneness have been linked to general problem gambling and may play a role in online poker. Participants of this study were self-selected online poker players (N = 179) who completed an online survey. Results revealed that participants played an average of 20 hours of online poker a week and approximately 9% of the sample was classified as a problem gambler according to the Canadian Problem Gambling Index. Problem gambling, in this sample, was uniquely predicted by time played, dissociation, boredom proneness, impulsivity, and negative affective states, namely depression, anxiety, and stress.

  20. Excess plutonium disposition: The deep borehole option

    SciTech Connect

    Ferguson, K.L.

    1994-08-09

    This report reviews the current status of technologies required for the disposition of plutonium in Very Deep Holes (VDH). It is in response to a recent National Academy of Sciences (NAS) report which addressed the management of excess weapons plutonium and recommended three approaches to the ultimate disposition of excess plutonium: (1) fabrication and use as a fuel in existing or modified reactors in a once-through cycle, (2) vitrification with high-level radioactive waste for repository disposition, (3) burial in deep boreholes. As indicated in the NAS report, substantial effort would be required to address the broad range of issues related to deep bore-hole emplacement. Subjects reviewed in this report include geology and hydrology, design and engineering, safety and licensing, policy decisions that can impact the viability of the concept, and applicable international programs. Key technical areas that would require attention should decisions be made to further develop the borehole emplacement option are identified.

  1. Excess junction current of silicon solar cells

    NASA Technical Reports Server (NTRS)

    Wang, E. Y.; Legge, R. N.; Christidis, N.

    1973-01-01

    The current-voltage characteristics of n(plus)-p silicon solar cells with 0.1, 1.0, 2.0, and 10 ohm-cm p-type base materials have been examined in detail. In addition to the usual I-V measurements, we have studied the temperature dependence of the slope of the I-V curve at the origin by the lock-in technique. The excess junction current coefficient (Iq) deduced from the slope at the origin depends on the square root of the intrinsic carrier concentration. The Iq obtained from the I-V curve fitting over the entire forward bias region at various temperatures shows the same temperature dependence. This result, in addition to the presence of an aging effect, suggest that the surface channel effect is the dominant cause of the excess junction current.

  2. Comparative evaluation of pre-emptive analgesic efficacy of intramuscular ketorolac versus tramadol following third molar surgery.

    PubMed

    Shah, Ashwin V; Arun Kumar, K V; Rai, Kirthi Kumar; Rajesh Kumar, B P

    2013-06-01

    Pre-emptive analgesia aims at preventing the central nervous system from reaching a hyper-excitable state known as central sensitization, in which it responds excessively to afferent inputs. The clinical implication would be more effective pain management, thereby reducing post-operative pain and analgesic requirements. This study aimed at investigating the existence of pre-emptive analgesia and to compare the pre-emptive analgesic efficacy of im ketorolac [NSAID] versus tramadol [SYNTHETIC OPIOD] for post-operative pain management following third molar surgery. Fifty patients under the age group of 16-25 years with asymptomatic, symmetrically impacted mandibular third molars were equally divided into 2 groups and underwent third molar surgery under local anesthesia. Ketorolac 30 mg and tramadol 50 mg were used in the study group, while sodium chloride 0.9 % was used in the control group. Study parameters included pain intensity scores for 12 post-operative hours, time to 1st rescue analgesia, total number of analgesics consumed during the 5 post-operative days and patients' self assessment of efficacy of the surgery with regardsto no pain. Statistically, the data are presented as the mean values with their standard deviations and a 95 % confidence interval [p is significant, if p < 0.05] for the mean are applicable. Incidences of adverse events like pain on injection of the study drug, local reactions, nausea and vomiting were noted. Patients in the study group significantly performed better than the control group in terms of all the parameters; while among the study group, ketorolac fared better than tramadol. All the drug related complications were mild and did not require any intervention. Pre-operative ketorolac or tramadol in comparison to placebo resulted in a significantly better post-operative pain management. However as against tramadol, ketorolac is a better choice as a pre-emptive analgesic agent for the post-operative pain management following

  3. Search for bright stars with infrared excess

    SciTech Connect

    Raharto, Moedji

    2014-03-24

    Bright stars, stars with visual magnitude smaller than 6.5, can be studied using small telescope. In general, if stars are assumed as black body radiator, then the color in infrared (IR) region is usually equal to zero. Infrared data from IRAS observations at 12 and 25μm (micron) with good flux quality are used to search for bright stars (from Bright Stars Catalogues) with infrared excess. In magnitude scale, stars with IR excess is defined as stars with IR color m{sub 12}−m{sub 25}>0; where m{sub 12}−m{sub 25} = −2.5log(F{sub 12}/F{sub 25})+1.56, where F{sub 12} and F{sub 25} are flux density in Jansky at 12 and 25μm, respectively. Stars with similar spectral type are expected to have similar color. The existence of infrared excess in the same spectral type indicates the existence of circum-stellar dust, the origin of which is probably due to the remnant of pre main-sequence evolution during star formation or post AGB evolution or due to physical process such as the rotation of those stars.

  4. Earnings Quality Measures and Excess Returns.

    PubMed

    Perotti, Pietro; Wagenhofer, Alfred

    2014-06-01

    This paper examines how commonly used earnings quality measures fulfill a key objective of financial reporting, i.e., improving decision usefulness for investors. We propose a stock-price-based measure for assessing the quality of earnings quality measures. We predict that firms with higher earnings quality will be less mispriced than other firms. Mispricing is measured by the difference of the mean absolute excess returns of portfolios formed on high and low values of a measure. We examine persistence, predictability, two measures of smoothness, abnormal accruals, accruals quality, earnings response coefficient and value relevance. For a large sample of US non-financial firms over the period 1988-2007, we show that all measures except for smoothness are negatively associated with absolute excess returns, suggesting that smoothness is generally a favorable attribute of earnings. Accruals measures generate the largest spread in absolute excess returns, followed by smoothness and market-based measures. These results lend support to the widespread use of accruals measures as overall measures of earnings quality in the literature.

  5. [CLINICAL INVESTIGATION OF AN EXCESSIVE SLEEPINESS COMPLAINT].

    PubMed

    Evangelista, Elisa; Barateau, Lucie; Dauvilliers, Yves

    2016-06-01

    Excessive sleepiness is a common problem, defined by a complaint of excessive daytime sleepiness almost daily with an inability to stay awake and alert dosing periods at sleep, with episodes of irresistible sleep need or drowsiness or non-intentional sleep, or by a night's sleep time overly extended often associated with sleep inertia. This sleepiness is variable in terms of phenotype and severity to be specified by the out-patient clinic. It is considered to be chronic beyond three months and often responsible for significant functional impairment of school and professional performance, of the accidents and cardiovascular risk. We need to decipher the causes of excessive sleepiness: sleep deprivation, toxic and iatrogenic, psychiatric disorders (including depression), non-psychiatric medical problems (obesity, neurological pathologies...), sleep disorders (as for example the sleep apnea syndrome), and finally the central hypersomnias namely narcolepsy type 1 and 2, idiopathic hypersomnia, and Kleine-Levin syndrome. If careful questioning often towards one of these etiologies, need most of the time a paraclinical balance with a sleep recording to confirm the diagnosis. Patients affected with potential central hypersomnia must be referred to the Sleep Study Centers that have the skills and the appropriate means to achieve this balance sheet.

  6. Negative excess noise in gated quantum wires

    SciTech Connect

    Dolcini, F.; Trauzettel, B.; Safi, I.; Grabert, H.

    2009-04-23

    The electrical current noise of a quantum wire is expected to increase with increasing applied voltage. We show that this intuition can be wrong. Specifically, we consider a single channel quantum wire with impurities and with a capacitive coupling to a metallic gate, and find that its excess noise, defined as the change in the noise caused by the finite voltage, can be negative at zero temperature. This feature is present both for large (c>>c{sub q}) and small (c<>c{sub q}, negativity of the excess noise can occur at finite frequency when the transmission coefficients are energy dependent, i.e. in the presence of Fabry-Perot resonances or band curvature. In the opposite regime c < or approx. c{sub q}, a non trivial voltage dependence of the noise arises even for energy independent transmission coefficients: at zero frequency the noise decreases with voltage as a power law when cexcess noise are present due to Andreev-type resonances.

  7. Earnings Quality Measures and Excess Returns

    PubMed Central

    Perotti, Pietro; Wagenhofer, Alfred

    2014-01-01

    This paper examines how commonly used earnings quality measures fulfill a key objective of financial reporting, i.e., improving decision usefulness for investors. We propose a stock-price-based measure for assessing the quality of earnings quality measures. We predict that firms with higher earnings quality will be less mispriced than other firms. Mispricing is measured by the difference of the mean absolute excess returns of portfolios formed on high and low values of a measure. We examine persistence, predictability, two measures of smoothness, abnormal accruals, accruals quality, earnings response coefficient and value relevance. For a large sample of US non-financial firms over the period 1988–2007, we show that all measures except for smoothness are negatively associated with absolute excess returns, suggesting that smoothness is generally a favorable attribute of earnings. Accruals measures generate the largest spread in absolute excess returns, followed by smoothness and market-based measures. These results lend support to the widespread use of accruals measures as overall measures of earnings quality in the literature. PMID:26300582

  8. Submillimeter to centimeter excess emission from the Magellanic Clouds. II. On the nature of the excess

    NASA Astrophysics Data System (ADS)

    Bot, C.; Ysard, N.; Paradis, D.; Bernard, J. P.; Lagache, G.; Israel, F. P.; Wall, W. F.

    2010-11-01

    Context. Dust emission at sub-millimeter to centimeter wavelengths is often simply the Rayleigh-Jeans tail of dust particles at thermal equilibrium and is used as a cold mass tracer in various environments, including nearby galaxies. However, well-sampled spectral energy distributions of the nearby, star-forming Magellanic Clouds have a pronounced (sub-)millimeter excess. Aims: This study attempts to confirm the existence of this millimeter excess above expected dust, free-free and synchrotron emission and to explore different possibilities for its origin. Methods: We model near-infrared to radio spectral energy distributions of the Magellanic Clouds with dust, free-free, and synchrotron emission. A millimeter excess emission is confirmed above these components and its spectral shape and intensity are analyzed in light of different scenarios: very cold dust, cosmic microwave background (CMB) fluctuations, a change of the dust spectral index and spinning dust emission. Results: We show that very cold dust or CMB fluctuations are very unlikely explanations for the observed excess in these two galaxies. The excess in the Large Magellanic Cloud can be satisfactorily explained either by a change of the spectral index related to intrinsic properties of amorphous grains, or by spinning dust emission. In the Small Magellanic Cloud, however, the excess is larger and the dust grain model including TLS/DCD effects cannot reproduce the observed emission in a simple way. A possible solution was achieved with spinning dust emission, but many assumptions on the physical state of the interstellar medium had to be made. Conclusions: Further studies, with higher resolution data from Planck and Herschel are needed to probe the origin of this observed submillimeter-centimeter excess more definitely. Our study shows that the different possible origins will be best distinguished where the excess is the highest, as is the case in the Small Magellanic Cloud.

  9. Excess and unlike interaction second virial coefficients and excess enthalpy of mixing of (carbon monoxide + pentane)

    SciTech Connect

    McElroy, P.J.; Buchanan, S.

    1995-03-01

    Carbon monoxide and pentane are minor components of natural gas. The excess second virial coefficient of the mixture carbon monoxide + pentane has been determined at 299.5, 313.15, 328.15, and 343.15 K using the pressure change on mixing method. Unlike interaction second virial coefficients were derived and compared with the predictions of the Tsonopoulos correlation. The excess enthalpy of mixing was also estimated.

  10. Efficiency of two protocols for maxillary molar intrusion with mini-implants

    PubMed Central

    Paccini, Juliana Volpato Curi; Cotrim-Ferreira, Flávio Augusto; Ferreira, Flávio Vellini; de Freitas, Karina Maria Salvatore; Cançado, Rodrigo Hermont; Valarelli, Fabrício Pinelli

    2016-01-01

    ABSTRACT Objective: The aim of this study was to compare the efficiency of two protocols for maxillary molar intrusion with two or three mini-implants. Methods: Twenty five maxillary first molars extruded for loss of their antagonists in adult subjects were selected. The sample was divided into two groups, according to the intrusion protocol with two or three mini-implants. Group 1 consisted of 15 molars that were intruded by two mini-implants. Group 2 consisted of 10 molars intruded by three mini-implants. Changes with treatment were analyzed in lateral cephalograms at the beginning and at the end of intrusion of maxillary molars. Results: Results showed that there was no difference in efficiency for the two intrusion protocols. It was concluded that extruded maxillary molars can be intruded with two or three mini-implants with similar efficiency. PMID:27409654

  11. A morphological study on the crown dimensions of the mandibular molars in Tupaia glis.

    PubMed

    Kondo, S; Hanamura, H; Wakatsuki, E

    1994-03-01

    The crown dimensions of the mandibular molars in Tupaia glis were measured. All the mean values of crown diameters and areas were larger for the M1 molar than for the M2 and M3. The last two molars were more reduced in the talonid component than in the trigonid compared to the M1, and were more reduced in the buccolingual than in the mesiodistal direction. The most common molar size sequence (MSS) was M1 > M2 > M3, and this pattern was more frequently observed in the talonid component than in the trigonid. In the canonical discriminant analysis, all the cases of the M3 were discriminated correctly, but some cases of the first two molars were confused with each other. The molars size of the mandible was closely related to that of the maxilla.

  12. Saving the 2nd Molar from the 3rd Is it Really the Guilt of the Tilt?

    PubMed Central

    Yadav, Pankaj; Nawal, Ruchika Roongta; Talwar, Sangeeta; Verma, Mahesh

    2016-01-01

    Introduction Clinicians often relate the distal caries in second molars to angulated third molars, which if left undetected can lead to gross decay that may further require removal of the tooth. Due to this fact, many third molars are advised for prophylactic removal to prevent decay in the second molar. But this approach would only be justified when the incidence of decay/loss of second molar due to third molar are reasonably high. We sought to determine incidence of caries experience and also sequel extraction in second molars associated with the third molars. Aim The study was conducted to answer the basic question that whether the incidence of caries and subsequent extraction of second molar due to angulated third molars is high enough to justify the prophylactic removal of third molar or not. Materials and Methods This study was conducted on radiographic records of 1187 patients. The effect of tilted third molar on the second molar was measured in relation with three parameters namely level & position of third molar with respect to second molar and the distribution among arches. Results The results indicated that out of total number of teeth examined only 5.4% of maxillary and 9.6% of mandibular second molars were affected by tilted third molars. Further, only 2.2% of mandibular and 2.9% of maxillary second molars were indicated for extraction. The data was statistically insignificant. Conclusion It was concluded that distal caries in second molars is not very common. It may be present in some cases of third molar impactions and prophylactic removal of these impacted teeth may not be considered appropriate. PMID:27437353

  13. Management of over-retained mandibular deciduous second molars with and without permanent successors.

    PubMed

    Sabri, Roy

    2008-01-01

    The objective of this article is to describe the various clinical situations of prolonged retention of mandibular deciduous second molars. Indications for orthodontic space closure in the absence of permanent successors and treatment alternatives in space opening, including retaining the deciduous molars, are described. Periodic monitoring, composite buildups, and indications and timing of extraction of infraoccluded and ankylosed deciduous molars with and without permanent successors are reviewed.

  14. Automatic Molar Extraction from Dental Panoramic Radiographs for Forensic Personal Identification

    NASA Astrophysics Data System (ADS)

    Samopa, Febriliyan; Asano, Akira; Taguchi, Akira

    Measurement of an individual molar provides rich information for forensic personal identification. We propose a computer-based system for extracting an individual molar from dental panoramic radiographs. A molar is obtained by extracting the region-of-interest, separating the maxilla and mandible, and extracting the boundaries between teeth. The proposed system is almost fully automatic; all that the user has to do is clicking three points on the boundary between the maxilla and the mandible.

  15. Age estimation using development of third molars in South Indian population: A radiological study

    PubMed Central

    Priyadharshini, K. Indra; Idiculla, Jose Joy; Sivapathasundaram, B.; Mohanbabu, V.; Augustine, Dominic; Patil, Shankargouda

    2015-01-01

    Aim: To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A–H) method of Demirjian et al. in Chennai population of South India. Materials and Methods: A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. Results: The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). Conclusion: There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization. PMID:25984465

  16. Rotation of rectangular wire in rectangular molar tubes. Part I.

    PubMed

    Raphael, E; Sandrik, J L; Klapper, L

    1981-08-01

    The degree of angular rotation of rectangular orthodontic wires in rectangular molar tubes was measured using a rotatable mechanical stage on a Unitron metallograph and compared to theoretical data. It was found that square 0.016 inch wire did not bind in 0.018 by 0.022 inch or larger mandrel- or inconel-formed tubes, whereas rotations of 11 to 23 degrees were noted in cast tubes of this dimension. Although 0.016 by 0.022 inch wire did bind in these tubes, the degree of rotation was far greater than expected on the basis of theoretical calculations or clinical expectations. The results indicated that it was unrealistic to expect fine control of a few degrees of torque to occur as expected for delicate clinical control.

  17. Molar extinction coefficients of some carbohydrates in aqueous solutions

    NASA Astrophysics Data System (ADS)

    Singh, K.; Sandhu, G. K.; Lark, B. S.; Sud, S. P.

    2002-03-01

    Molar extinction coefficients of some carbohydrates viz. L-arabinose (C5H10O5), D-glucose (C6H12O6), D-mannose (C6H12O6), D-galactose (C6H12O6), D(-) fructose (C6H12O6) and maltose (C12H24O12) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer--Lambert law is obeyed very well.

  18. Calculations of Molar Fractions of the IPR C78 Fullerenes

    NASA Astrophysics Data System (ADS)

    Uhlík, Filip; Slanina, Zdeněk

    2002-10-01

    There are five isolated-pentagon-rule (IPR) satisfying isomers of C78. In contradiction to theoretical predictions, only three isomers were observed in experiments and the fourth one was not identified until very recently. In this work we calculate structural and energetic data of the five IPR C78 fullerenes, namely we optimized their geometries with the B3LYP density-functional method using the standard 4-31G basis set (B3LYP/4-31G), calculated separation energies at the B3LYP/6-311G* level (B3LYP/6-311G*//B3LYP/4-31G), estimated energies of low lying electronic states with the ZINDO semiempirical method and calculated harmonic vibrational frequencies with the semiempirical SAM1 method. From the obtained data we constructed chirality respecting isomeric partition functions and evaluated molar fractions in the equilibrium isomeric mixture for a wide temperature interval.

  19. Transmission electron microscope characterisation of molar-incisor-hypomineralisation.

    PubMed

    Xie, Zonghan; Kilpatrick, Nicky M; Swain, Michael V; Munroe, Paul R; Hoffman, Mark

    2008-10-01

    Molar-incisor-hypomineralisation (MIH), one of the major developmental defects in dental enamel, is presenting challenge to clinicians due, in part, to the limited understanding of microstructural changes in affected teeth. Difficulties in the preparation of site-specific transmission electron microscope (TEM) specimens are partly responsible for this deficit. In this study, a dual-beam field emission scanning electron microscope (FESEM)/focused ion beam (FIB) milling instrument was used to prepare electron transparent specimens of sound and hypomineralised enamel. Microstructural analysis revealed that the hypomineralised areas in enamel were associated with marked changes in microstructure; loosely packed apatite crystals within prisms and wider sheath regions were identified. Microstructural changes appear to occur during enamel maturation and may be responsible for the dramatic reduction in mechanical properties of the affected regions. An enhanced knowledge of the degradation of structural integrity in hypomineralised enamel could shed light on more appropriate management strategies for these developmental defects.

  20. Fast Track to Molar-Mass Distributions of Technical Lignins.

    PubMed

    Sulaeva, Irina; Zinovyev, Grigory; Plankeele, Jean-Michel; Sumerskii, Ivan; Rosenau, Thomas; Potthast, Antje

    2017-02-08

    Technical lignins (waste products obtained from wood pulping or biorefinery processes) have so far required lengthy analysis procedures and different eluents for molar-mass analysis by gel permeation chromatography (GPC). This challenge has become more pressing recently since attempts to utilize lignins have increased, leading to skyrocketing numbers of samples to be analyzed. A new approach, which uses the eluent DMSO/LiBr (0.5 % w/v) and converts lignosulfonate salts into their acidic form before analysis, overcomes these limitations by enabling measurement of all kinds of lignins (kraft, organosolv, soda, lignosulfonates) in the same size-exclusion chromatography (SEC) system without the necessity of prior time-consuming derivatization steps. In combination with ultra-performance liquid chromatography (UPLC), analysis times are shortened to one tenth of classical lignin GPC. The new approach is presented, along with a comparison of GPC and UPLC methods and a critical discussion of the analytical parameters.

  1. Unusual anatomical detection of a third molar in the infratemporal fossa.

    PubMed

    Corega, C; Vaida, L; Festila, D; Bertossi, D

    2013-01-01

    Third molar presence in the infratemporal fossa is a rare event and it has been reported previously only two times in the literature, except for the cases which arise from complications occurring during the extraction of the impacted upper third molar. Due to the presence of important vessel bundles and nerves in this area, third molar removal requires a correct surgical management in order to avoid many possible serious side effects. We report an unusual case of upper third molar detected in the infratemporal fossa, which has been thoroughly investigated radiologically and removed through a safe surgical approach.

  2. Mandibular Third Molar Impaction: Review of Literature and a Proposal of a Classification

    PubMed Central

    Daugela, Povilas

    2013-01-01

    ABSTRACT Objectives The purpose of present article was to review impacted mandibular third molar aetiology, clinical anatomy, radiologic examination, surgical treatment and possible complications, as well as to create new mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results. Material and Methods Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandibular third molar, impacted mandibular third molar, inferior alveolar nerve injury third molar, lingual nerve injury third molar. The search was restricted to English language articles, published from 1976 to April 2013. Additionally, a manual search in the major anatomy and oral surgery journals and books was performed. The publications there selected by including clinical and human anatomy studies. Results In total 75 literature sources were obtained and reviewed. Impacted mandibular third molar aetiology, clinical anatomy, radiographic examination, surgical extraction of and possible complications, classifications and risk factors were discussed. New mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results was proposed. Conclusions The classification proposed here based on anatomical and radiological impacted mandibular third molar features is promising to be a helpful tool for impacted tooth assessment as well as for planning for surgical operation. Further clinical studies should be conducted for new classification validation and reliability evaluation. PMID:24422029

  3. A Prospective Study of Clinical Outcomes Related to Third Molar Removal or Retention

    PubMed Central

    Cunha-Cruz, Joana; Rothen, Marilynn; Spiekerman, Charles; Drangsholt, Mark; Anderson, Loren; Roset, Gayle A.

    2014-01-01

    Objectives. We investigated outcomes of third molar removal or retention in adolescents and young adults. Methods. We recruited patients aged 16 to 22 years from a dental practice–based research network in the Pacific Northwest from May 2009 through September 2010 who had at least 1 third molar present and had never undergone third molar removal. Data were acquired via questionnaire and clinical examination at baseline, periodic online questionnaires, and clinical examination at 24 months. Results. A total of 801 patients participated. Among patients undergoing third molar removal, rates of paresthesia and jaw joint symptoms lasting more than 1 month were 6.3 and 34.3 per 100 person-years, respectively. Among patients not undergoing removal, corresponding rates were 0.7 and 8.8. Periodontal attachment loss at distal sites of second molars did not significantly differ by third molar removal status. Incident caries at the distal surfaces of second molars occurred in fewer than 1% of all sites. Conclusions. Rates of paresthesia and temporomandibular joint disorder were higher after third molar removal. Periodontal attachment loss and incident caries at the distal sites of second molars were not affected by extraction status. PMID:24524521

  4. The evolution of molar occlusion in the Cercopithecidae and early Catarrhines.

    PubMed

    Kay, R F

    1977-03-01

    Those Eocene prosimians which are possible catarrhine ancestors have four blade-like crests on each lower molar. Each crest shears in sequence across two upper molar crests. Occluding crests are concavely curved to hold the foods being sheared. Each of two medial lower molar crests bordering the principal crushing surface shear past single upper molar crests at about the same time the lateral lower molar crests contact the second rank of upper molar crests. Grinding and crushing areas are restricted to hypoconid, trigonid, and protocone surfaces. Oligocene catarrhine molars have increased crushing-grinding capacities and maintained but modify their shearing. As the crushing surface of the protocone expands and a crushing hypocone is added, the "second rank" upper molar shearing crests are functionally reduced. At the same time medial crests are increasingly emphasized so that the total shearing capacity remains virtually unchanged. Marginal shearing blades are straight edged; leading edges of occluding blades are set at different angles to the occlusal plane so that blades contact at only one point at any given time. Early Primates have separate crushing basins surrounded by shearing blades. Catarrhines tend to link explanding crushing surfaces anteroposteriorly into a continuous surface between all molars. A cladistic analysis based on both new and previously recognized characters indicates that: 1. Apidium may be more closely related to Aegyptopithecus than to Parapithecus; 2. cercopithecids are derived from a Parapithecus-related stock; 3. Oreopithecus could equally well have come from an Apidium or Aegyptopithecus stock.

  5. Do antibiotics reduce the frequency of surgical site infections after impacted mandibular third molar surgery?

    PubMed

    Susarla, Srinivas M; Sharaf, Basel; Dodson, Thomas B

    2011-11-01

    Surgical removal of impacted third molars remains the most common procedure performed by oral and maxillofacial surgeons. Given the abundance of host bacteria within the operative sites, surgical site infections are among the most common complications of third molar removal, with an estimated frequency of 1% to 30%. In this setting, significant controversy has surrounded the use of prophylactic antibiotics in the surgical management of impacted third molars. This article provides a comprehensive review of the available data on antibiotic prophylaxis in impacted third molar surgery and offers specific recommendations on antibiotic use.

  6. Appositional enamel growth in molars of South African fossil hominids.

    PubMed

    Lacruz, Rodrigo S; Bromage, Timothy G

    2006-07-01

    Enamel is formed incrementally by the secretory activity of ameloblast cells. Variable stages of secretion result in the formation of structures known as cross striations along enamel prisms, for which experimental data demonstrate a correspondence with daily periods of secretion. Patterns of variation in this daily growth are important to understanding mechanisms of tooth formation and the development of enamel thickness. Transmitted light microscopy (TLM) of histological ground sections and scanning electron microscopy (SEM) of bulk specimens or their surface replicas are the usual methods for investigating cross striations. However, these methods pose some constraints on the study of these features in Plio-Pleistocene hominid enamel, the specimens of which may only rarely be sectioned for TLM or examined on only their most superficial surfaces for SEM. The recent development of portable confocal scanning optical microscopy (PCSOM) resolves some of the restrictions on fractured enamel surfaces, allowing the visualization of cross striations by direct examination. This technology has been applied here to the study of Australopithecus africanus and Paranthropus robustus hominid molars from the Plio-Pleistocene of South Africa. We hypothesize that these taxa have increased enamel appositional rates compared with modern humans, because despite having thicker enamelled molars (particularly P. robustus), the enamel crowns of these fossil taxa take an equivalent or reduced amount of time to form. Cross striations were measured in cuspal, lateral and cervical regions of the enamel crowns, and, within each region, the inner, middle and outer zones. Values obtained for A. africanus outer zones of the enamel crown are, in general, lower than those for P. robustus, indicating faster forming enamel in the latter, while both taxa show higher rates of enamel growth than modern humans and the African great apes. This demonstrates a relatively high degree of variability in the

  7. Brief communication: Molar development and crown areas in early Australopithecus.

    PubMed

    Lacruz, Rodrigo S; Ramirez Rozzi, Fernando V; Wood, Bernard A; Bromage, Timothy G

    2012-08-01

    Recent studies suggest that the hypodigms representing the two earliest Australopithecus (Au. anamensis and Au. afarensis) form an ancestor-descendant lineage. Understanding the details of this possible transition is important comparative evidence for assessing the likelihood of other examples of ancestor-descendant lineages within the hominin clade. To this end we have analyzed crown and cusp base areas of high resolution replicas of the mandibular molars of Au. anamensis (Allia Bay and Kanapoi sites) and those of Au. afarensis (Hadar, Laetoli, and Maka). We found no statistically significant differences in crown areas between these hypodigms although the mean of M(1) crowns was smaller in Au. anamensis, being the smallest of any Australopithecus species sampled to date. Intraspecies comparison of the areas of mesial cusps for each molar type using Wilcoxon signed rank test showed no differences for Au. anamensis. Significant differences were found between the protoconid and metaconid of Au. afarensis M(2)s and M(3)s. Furthermore, the area formed by the posterior cusps as a whole relative to the anterior cusps showed significant differences in Au. afarensis M(1)s and in Au. anamensis M(2)s but no differences were noted for M(3)s of either taxon. Developmental information derived from microstructural details in enamel shows that M(1) crown formation in Au. anamensis is similar to Pan and shorter than in H. sapiens. Taken together, these data suggests that the overall trend in the Au. anamensis-Au. afarensis transition may have involved a moderate increase in M(1) crown areas with relative expansion of distal cusps.

  8. Mineralocorticoid excess, dietary sodium, and myocardial fibrosis.

    PubMed

    Brilla, C G; Weber, K T

    1992-12-01

    Unlike the non-renin-dependent hypertension associated with infrarenal aorta banding, an abnormal accumulation of fibrillar collagen occurs within the adventitia of intramural coronary arteries and neighboring interstitial space of the left and right ventricles in arterial hypertension associated with primary or secondary hyperaldosteronism. Based on these findings it was suggested that this interstitial and perivascular fibrosis was mediated by mineralocorticoid excess (i.e., elevated plasma aldosterone relative to dietary sodium) and not ventricular loading. To further address the importance of mineralocorticoid excess, we examined the fibrous tissue response after 8 weeks in the following uninephrectomized rat groups receiving a high-sodium diet: D-aldosterone (ALDO) infusion (0.75 micrograms/hr sc, n = 16); deoxycorticosterone acetate (DOCA) administration (100 mg/kg/wk sc, n = 8); and administration of a mineralocorticoid-like substance, glycyrrhizic acid (GA; 1 gm kg/wk sc, n = 8). Compared with ALDO infusion and sodium deprivation (n = 9), untreated controls (n = 14), and uninephrectomized rats with high dietary sodium and no mineralocorticoid administration (n = 15), we found (1) hypertension and left ventricular hypertrophy with all forms of mineralocorticoid excess; (2) a rise in collagen volume fraction with ALDO, and an increase in perivascular collagen with DOCA; and (3) no observance of myocardial fibrosis with GA or experimental controls, including ALDO infusion and sodium deprivation. Thus, in the presence of enhanced sodium intake, chronic administration of ALDO or DOCA are associated with collagen accumulation in the myocardium, whereas with the mineralocorticoid-like compound GA, myocardial fibrosis was not seen.(ABSTRACT TRUNCATED AT 250 WORDS)

  9. Phospholipids as Biomarkers for Excessive Alcohol Use

    DTIC Science & Technology

    2015-10-01

    than 4 standard drinks in a day (or more than 14 per week ) and women who drink more than 3 drinks in a day (or more than 7 per week ). Non-civilian...excessive drinking is defined as men who drink more than 4 standard drinks in a day (or more than 14 per week ) and women who drink more than 3 drinks in a...day (or more than 7 per week ). Non-civilian military personnel have been deployed in support of the war efforts in Afghanistan (Operation Enduring

  10. Propylene Glycol Poisoning From Excess Whiskey Ingestion

    PubMed Central

    Ku, Kevin; Sue, Gloria R.

    2015-01-01

    In this report, we describe a case of high anion gap metabolic acidosis with a significant osmolal gap attributed to the ingestion of liquor containing propylene glycol. Recently, several reports have characterized severe lactic acidosis occurring in the setting of iatrogenic unintentional overdosing of medications that use propylene glycol as a diluent, including lorazepam and diazepam. To date, no studies have explored potential effects of excess propylene glycol in the setting of alcohol intoxication. Our patient endorsed drinking large volumes of cinnamon flavored whiskey, which was likely Fireball Cinnamon Whisky. To our knowledge, this is the first case of propylene glycol toxicity from an intentional ingestion of liquor containing propylene glycol. PMID:26904700

  11. [Excessive spending by misuse of clinical laboratory].

    PubMed

    Benítez-Arvizu, Gamaliel; Novelo-Garza, Bárbara; Mendoza-Valdez, Antonia Lorena; Galván-Cervantes, Jorge; Morales-Rojas, Alejandro

    2016-01-01

    Seventy five percent or more of a diagnosis comes from a proper medical history along with an excellent physical examination. This leaves to the clinical laboratory the function of supporting the findings, determining prognosis, classifying the diseases, monitoring the diseases and, in the minimum of cases, establishing the diagnosis. In recent years there has been a global phenomenon in which the allocation of resources to health care has grown in an excessive way; the Instituto Mexicano del Seguro Social is not an exception with an increase of 29 % from 2009 to 2011; therefore, it is necessary to set containment and reduction without compromising the quality of patient care.

  12. Subcorneal hematomas in excessive video game play.

    PubMed

    Lennox, Maria; Rizzo, Jason; Lennox, Luke; Rothman, Ilene

    2016-01-01

    We report a case of subcorneal hematomas caused by excessive video game play in a 19-year-old man. The hematomas occurred in a setting of thrombocytopenia secondary to induction chemotherapy for acute myeloid leukemia. It was concluded that thrombocytopenia subsequent to prior friction from heavy use of a video game controller allowed for traumatic subcorneal hemorrhage of the hands. Using our case as a springboard, we summarize other reports with video game associated pathologies in the medical literature. Overall, cognizance of the popularity of video games and related pathologies can be an asset for dermatologists who evaluate pediatric patients.

  13. Immobilization of excess weapons plutonium in Russia

    SciTech Connect

    Borisov, G B; Jardine, L J; Mansourov, O A

    1999-01-25

    In this paper, we examine the logic and framework for the development of a capability to immobilize excess Russian weapons plutonium by the year 2004. The initial activities underway in Russia, summarized here, include engineering feasibility studies of the immobilization of plutonium-containing materials at the Krasnoyarsk and Mayak industrial sites. In addition, research and development (R&D) studies are underway at Russian institutes to develop glass and ceramic forms suitable for the immobilization of plutonium-containing materials, residues, and wastes and for their geologic disposal.

  14. Accuracy of Panoramic Radiograph in Assessment of the Relationship Between Mandibular Canal and Impacted Third Molars

    PubMed Central

    Tantanapornkul, Weeraya; Mavin, Darika; Prapaiphittayakun, Jaruthai; Phipatboonyarat, Natnicha; Julphantong, Wanchanok

    2016-01-01

    Background: The relationship between impacted mandibular third molar and mandibular canal is important for removal of this tooth. Panoramic radiography is one of the commonly used diagnostic tools for evaluating the relationship of these two structures. Objectives: To evaluate the accuracy of panoramic radiographic findings in predicting direct contact between mandibular canal and impacted third molars on 3D digital images, and to define panoramic criterion in predicting direct contact between the two structures. Methods: Two observers examined panoramic radiographs of 178 patients (256 impacted mandibular third molars). Panoramic findings of interruption of mandibular canal wall, isolated or with darkening of third molar root, diversion of mandibular canal and narrowing of third molar root were evaluated for 3D digital radiography. Direct contact between mandibular canal and impacted third molars on 3D digital images was then correlated with panoramic findings. Panoramic criterion was also defined in predicting direct contact between the two structures. Results: Panoramic findings of interruption of mandibular canal wall, isolated or with darkening of third molar root were statistically significantly correlated with direct contact between mandibular canal and impacted third molars on 3D digital images (p < 0.005), and were defined as panoramic criteria in predicting direct contact between the two structures. Conclusion: Interruption of mandibular canal wall, isolated or with darkening of third molar root observed on panoramic radiographs were effective in predicting direct contact between mandibular canal and impacted third molars on 3D digital images. Panoramic radiography is one of the efficient diagnostic tools for pre-operative assessment of impacted mandibular third molars. PMID:27398105

  15. Surgery for residual convergence excess esotropia.

    PubMed

    Patel, Himanshu I; Dawson, Emma; Lee, John

    2011-12-01

    The outcome of bilateral medial rectus posterior fixation sutures +/- central tenotomy was assessed as a secondary procedure for residual convergence excess esotropia in 11 patients. Ten had previously undergone bilateral medial rectus recessions. One had recess/resect surgery on the deviating eye. The average preoperative near angle was 30 prism diopters with a range of 16 to 45 prism diopters. Eight patients underwent bilateral medial rectus posterior fixation sutures with central tenotomy. Two had bilateral medial rectus posterior fixation sutures only, and one had bilateral medial rectus posterior fixation suture, a lateral rectus resection, and an inferior oblique disinsertion. The postoperative near angle ranged from 4-30 prism diopters, with mean of 12 prism diopters. Five patients demonstrated some stereopsis preoperatively, all needing bifocals. Postoperatively, nine patients demonstrated an improvement in stereopsis, none needing bifocals. Two showed smaller near angles and better control without bifocals. Final stereopsis ranged from 30 seconds of arc to 800 seconds of arc. We feel that bilateral medial rectus posterior fixation sutures with or without central tenotomy is a viable secondary procedure for residual convergence excess esotropia.

  16. Hyperplasia in glands with hormone excess.

    PubMed

    Marx, Stephen J

    2016-01-01

    Five syndromes share predominantly hyperplastic glands with a primary excess of hormones: neonatal severe primary hyperparathyroidism, from homozygous mutated CASR, begins severely in utero; congenital non-autoimmune thyrotoxicosis, from mutated TSHR, varies from severe with fetal onset to mild with adult onset; familial male-limited precocious puberty, from mutated LHR, expresses testosterone oversecretion in young boys; hereditary ovarian hyperstimulation syndrome, from mutated FSHR, expresses symptomatic systemic vascular permeabilities during pregnancy; and familial hyperaldosteronism type IIIA, from mutated KCNJ5, presents in young children with hypertension and hypokalemia. The grouping of these five syndromes highlights predominant hyperplasia as a stable tissue endpoint and as their tissue stage for all of the hormone excess. Comparisons were made among this and two other groups of syndromes, forming a continuum of gland staging: predominant oversecretions express little or no hyperplasia; predominant hyperplasias express little or no neoplasia; and predominant neoplasias express nodules, adenomas, or cancers. Hyperplasias may progress (5 of 5) to neoplastic stages while predominant oversecretions rarely do (1 of 6; frequencies differ P<0.02). Hyperplasias do not show tumor multiplicity (0 of 5) unlike neoplasias that do (13 of 19; P<0.02). Hyperplasias express mutation of a plasma membrane-bound sensor (5 of 5), while neoplasias rarely do (3 of 14; P<0.002). In conclusion, the multiple distinguishing themes within the hyperplasias establish a robust pathophysiology. It has the shared and novel feature of mutant sensors in the plasma membrane, suggesting that these are major contributors to hyperplasia.

  17. Narcolepsy and disorders of excessive somnolence.

    PubMed

    Dyken, Mark E; Yamada, Thoru

    2005-06-01

    Recent studies provide valid criteria that help differentiate idiopathic narcolepsy from other disorders of excessive daytime somnolence [3]. Research to date suggests that idiopathic narcolepsy might properly be considered a disorder of excessive sleepiness with dysfunctional REM-sleep mechanisms, clinically evidenced as cataplexy and electrophysiologically recognized as SOREMPs. Given these criteria, a diagnosis can generally be made using a combination of history, PSG, and MSLT. Traditionally, the medical treatment of idiopathic narcolepsy has centered on a two-drug regimen (stimulants for sleepiness and TCAs for cataplexy and auxiliary symptoms). Some newer medications are proving efficacious for sleepiness with minimal adverse effects, whereas others may provide a single-drug regimen that simultaneously addresses sleepiness and cataplexy [18]. New research has allowed some experts to hypothesize that idiopathic narcolepsy may be the result of a genetic predisposition to autoimmune disease [176]. It is possible that aberrant genetic coding of elements in the hypocretin/orexin systems allows a sensitivity to inducible and possibly virally mediated changes, which leave cells in the lateral hypothalamus susceptible to autoimmune attack [96]. As such, genetic screening of high-risk individuals might eventually rationalize the prophylactic use of immunosuppressants in some instances. In the future, for atypical cases(poorly responsive to therapy), genetic, CSF, and brain imaging studies, and possibly even neuronal transplantation may prove beneficial in the assessment and treatment of idiopathic narcolepsy.

  18. Evaluation and endodontic management of a patient with 6 single-rooted molars: a case report.

    PubMed

    Jaikrishnan, S; Kottoor, Jojo; Mathew, Joy; Kumar, Sanjana Ravi; George, Saira; Hari, Krishna

    2015-01-01

    This case report describes a patient with unusual tooth morphology involving the bilateral presence of 6 maxillary and mandibular first and second molars with a single root and a single canal. The article also discusses the endodontic management of a single-rooted maxillary molar and the use of cone beam computed tomography for evaluation and diagnosis of these anatomical variations.

  19. 40 CFR 1066.610 - Mass-based and molar-based exhaust emission calculations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Mass-based and molar-based exhaust... (CONTINUED) AIR POLLUTION CONTROLS VEHICLE-TESTING PROCEDURES Calculations § 1066.610 Mass-based and molar-based exhaust emission calculations. (a) Calculate your total mass of emissions over a test cycle...

  20. 40 CFR 1066.610 - Mass-based and molar-based exhaust emission calculations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Mass-based and molar-based exhaust... (CONTINUED) AIR POLLUTION CONTROLS VEHICLE-TESTING PROCEDURES Calculations § 1066.610 Mass-based and molar-based exhaust emission calculations. (a) Calculate your total mass of emissions over a test cycle...

  1. Immediate changes in the mandibular dentition after maxillary molar distalization using headgear

    PubMed Central

    Kang, Sung-Ja; Kim, Hyun-Hee; Hwang, Hyeon-Shik

    2017-01-01

    The purpose of this study was to investigate immediate changes in the mandibular dentition after maxillary molar distalization using headgear in non-growing patients. Sixteen patients (mean age, 18.9 ± 2.0 years) with Class II molar relationship and crowding were included in the present study. To correct the molar relationship, headgear was used for maxillary molar distalization. Cone-beam computed tomography-generated half-cephalograms (CG Cephs) and dental casts were used to evaluate dental changes for each subject before and immediately after molar distalization using headgear. The mean duration that subjects wore the headgear was 6.3 months. CG Cephs showed that the first maxillary molars were distalized 4.2 ± 1.6 mm with 9.7° ± 6.1° of distal angulation. The intercanine, interpremolar, and intermolar widths of the mandible increased after maxillary molar distalization. The present study's results suggest that maxillary molar distalization using headgear induces a spontaneous response in the untreated mandibular dentition of non-growing patients. PMID:28337423

  2. Degradation of Ultra-High Molar Mass Polymers in Size-Exclusion Chromatography

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The degradation of high molar mass polymers during size-exclusion chromatography (SEC) analysis has been a topic of interest for several decades. Should a polymer degrade during analysis, the accuracy of the molar mass (M) and architectural information obtained will be compromised. To this effect,...

  3. A Semi-Empirical Excess Pressure Equation for CO{sub 2}-H{sub 2}O fluids at 400 C, 0--400 MPa

    SciTech Connect

    Blencoe, J.G.; Anovitz, L.M.; Singh, J.

    1999-09-12

    Highly accurate and precise density data for CO{sub 2}-H{sub 2}O mixtures at 400 C 10-400 MPa, were used to develop a modified, B-truncated virial equation for excess pressure (P{sup ex}). This function and empirical equations of state for H{sub 2}O and CO{sub 2} accurately represent the experimentally determined densities, and interpolate smoothly between data points. Integrating the P{sub ex} expression with respect to molar volume yields an equation for excess Helmholta free energy, which can be used to calculate other excess properties of interest. The P{sup ex} modeling method has important advantages over more conventional, alternative approaches.

  4. A Noble, Easy and Conceptual Radiographic Analysis to Assess the Type of Tooth Movement (Molar Distalization)

    PubMed Central

    Prakash, Anaveri Thimmappa; Deepthi; Naik, Atri

    2015-01-01

    Context and Aim Bodily tooth movement is desirable in the field of Orthodontics and so is with molar distalization. Till date there is no such analysis available which could gauge and quantify the molar distalization and the type of tooth movement achieved, therefore one was required. Materials and Methods An OPG and Lateral cephalogram was used taking Inter orbitale plane and FH plane respectively as reference lines and the analysis was devised to measure the amount and type of tooth movement achieved in distalization of molar. Conclusion This analysis is a noble, easy and conceptual analysis to assess the type of tooth movement achieved during molar distalization and other molar movements using Lateral cephalogram and orthopantomogram. PMID:26436040

  5. Iatrogenic mandibular fracture associated with third molar removal after mandibular angle osteotectomy.

    PubMed

    Xu, Jia-Jie; Teng, Li; Jin, Xiao-Lei; Lu, Jian-Jian; Zhang, Chao

    2014-05-01

    The extraction of mandibular third molars is a common dental procedure. The complications include hemorrhage, pain, dental fracture, the displacement of teeth or fragments, iatrogenic damage or luxation of the second molar, neurologic injuries, soft tissue damage, subcutaneous emphysema, trismus, swelling, infection, and iatrogenic mandibular fracture. Fracture of the angle of the mandible associated with third molar removal is a rare but severe complication. This article describes a case of mandibular angle fracture associated with third molar extraction after mandibular angle osteotectomy, including a brief review of the literature. The removal of the mandibular angle and the outer cortex of the mandible, especially the external oblique ridge, may contribute to the bone fracture. We conclude that the extraction of the lower third molar must be before the removal of the mandibular angle, and a soft diet for at least 4 weeks postoperatively is essential to prevent late mandible fracture.

  6. Management of excessive movable tissue: a modified impression technique.

    PubMed

    Shum, Michael H C; Pow, Edmond H N

    2014-08-01

    Excessive movable tissue is a challenge in complete denture prosthetics. A modified impression technique is presented with polyvinyl siloxane impression material and a custom tray with relief areas and perforations in the area of the excessive movable tissue.

  7. RESTORED STREAMS ENHANCE ABILITY TO REMOVE EXCESS NITROGEN

    EPA Science Inventory

    Issue: Excess nitrogen from fertilizer, septic tanks, animal feedlots, and runoff from pavement can threaten human and aquatic ecosystem health. Furthermore, degraded ecosystems like those impacted by urbanization have reduced ability to process and remove excess nitrogen from t...

  8. Faint Infrared-Excess Field Galaxies: FROGs

    NASA Astrophysics Data System (ADS)

    Moustakas, L. A.; Davis, M.; Zepf, S. E.; Bunker, A. J.

    Deep near-infrared and optical imaging surveys in the field reveal a curious population of galaxies that are infrared-bright (I-K>4), yet with relatively blue optical colors (V-I<2). Their surface density, several per square arcminute at K>20, is high enough that if placed at z>1 as our models suggest, their space densities are about one-tenth of phi-*. The colors of these ``faint red outlier galaxies'' (fROGs) may derive from exceedingly old underlying stellar populations, a dust-embedded starburst or AGN, or a combination thereof. Determining the nature of these fROGs, and their relation with the I-K>6 ``extremely red objects,'' has implications for our understanding of the processes that give rise to infrared-excess galaxies in general. We report on an ongoing study of several targets with HST & Keck imaging and Keck/LRIS multislit spectroscopy.

  9. Excess plutonium disposition using ALWR technology

    SciTech Connect

    Phillips, A.; Buckner, M.R.; Radder, J.A.; Angelos, J.G.; Inhaber, H.

    1993-02-01

    The Office of Nuclear Energy of the Department of Energy chartered the Plutonium Disposition Task Force in August 1992. The Task Force was created to assess the range of practicable means of disposition of excess weapons-grade plutonium. Within the Task Force, working groups were formed to consider: (1) storage, (2) disposal,and(3) fission options for this disposition,and a separate group to evaluate nonproliferation concerns of each of the alternatives. As a member of the Fission Working Group, the Savannah River Technology Center acted as a sponsor for light water reactor (LWR) technology. The information contained in this report details the submittal that was made to the Fission Working Group of the technical assessment of LWR technology for plutonium disposition. The following aspects were considered: (1) proliferation issues, (2) technical feasibility, (3) technical availability, (4) economics, (5) regulatory issues, and (6) political acceptance.

  10. Mapping interfacial excess in atom probe data.

    PubMed

    Felfer, Peter; Scherrer, Barbara; Demeulemeester, Jelle; Vandervorst, Wilfried; Cairney, Julie M

    2015-12-01

    Using modern wide-angle atom probes, it is possible to acquire atomic scale 3D data containing 1000 s of nm(2) of interfaces. It is therefore possible to probe the distribution of segregated species across these interfaces. Here, we present techniques that allow the production of models for interfacial excess (IE) mapping and discuss the underlying considerations and sampling statistics. We also show, how the same principles can be used to achieve thickness mapping of thin films. We demonstrate the effectiveness on example applications, including the analysis of segregation to a phase boundary in stainless steel, segregation to a metal-ceramic interface and the assessment of thickness variations of the gate oxide in a fin-FET.

  11. Vitamin paradox in obesity: Deficiency or excess?

    PubMed Central

    Zhou, Shi-Sheng; Li, Da; Chen, Na-Na; Zhou, Yiming

    2015-01-01

    Since synthetic vitamins were used to fortify food and as supplements in the late 1930s, vitamin intake has significantly increased. This has been accompanied by an increased prevalence of obesity, a condition associated with diabetes, hypertension, cardiovascular disease, asthma and cancer. Paradoxically, obesity is often associated with low levels of fasting serum vitamins, such as folate and vitamin D. Recent studies on folic acid fortification have revealed another paradoxical phenomenon: obesity exhibits low fasting serum but high erythrocyte folate concentrations, with high levels of serum folate oxidation products. High erythrocyte folate status is known to reflect long-term excess folic acid intake, while increased folate oxidation products suggest an increased folate degradation because obesity shows an increased activity of cytochrome P450 2E1, a monooxygenase enzyme that can use folic acid as a substrate. There is also evidence that obesity increases niacin degradation, manifested by increased activity/expression of niacin-degrading enzymes and high levels of niacin metabolites. Moreover, obesity most commonly occurs in those with a low excretory reserve capacity (e.g., due to low birth weight/preterm birth) and/or a low sweat gland activity (black race and physical inactivity). These lines of evidence raise the possibility that low fasting serum vitamin status in obesity may be a compensatory response to chronic excess vitamin intake, rather than vitamin deficiency, and that obesity could be one of the manifestations of chronic vitamin poisoning. In this article, we discuss vitamin paradox in obesity from the perspective of vitamin homeostasis. PMID:26322161

  12. Invisible excess of sense in social interaction.

    PubMed

    Koubová, Alice

    2014-01-01

    The question of visibility and invisibility in social understanding is examined here. First, the phenomenological account of expressive phenomena and key ideas of the participatory sense-making theory are presented with regard to the issue of visibility. These accounts plead for the principal visibility of agents in interaction. Although participatory sense-making does not completely rule out the existence of opacity and invisible aspects of agents in interaction, it assumes the capacity of agents to integrate disruptions, opacity and misunderstandings in mutual modulation. Invisibility is classified as the dialectical counterpart of visibility, i.e., as a lack of sense whereby the dynamics of perpetual asking, of coping with each other and of improvements in interpretation are brought into play. By means of empirical exemplification this article aims at demonstrating aspects of invisibility in social interaction which complement the enactive interpretation. Without falling back into Cartesianism, it shows through dramaturgical analysis of a practice called "(Inter)acting with the inner partner" that social interaction includes elements of opacity and invisibility whose role is performative. This means that opacity is neither an obstacle to be overcome with more precise understanding nor a lack of meaning, but rather an excess of sense, a "hiddenness" of something real that has an "active power" (Merleau-Ponty). In this way it contributes to on-going social understanding as a hidden potentiality that naturally enriches, amplifies and in part constitutes human participation in social interactions. It is also shown here that this invisible excess of sense already functions on the level of self-relationship due to the essential self-opacity and self-alterity of each agent of social interaction. The analysis consequently raises two issues: the question of the enactive ethical stance toward the alterity of the other and the question of the autonomy of the self

  13. Invisible excess of sense in social interaction

    PubMed Central

    Koubová, Alice

    2014-01-01

    The question of visibility and invisibility in social understanding is examined here. First, the phenomenological account of expressive phenomena and key ideas of the participatory sense-making theory are presented with regard to the issue of visibility. These accounts plead for the principal visibility of agents in interaction. Although participatory sense-making does not completely rule out the existence of opacity and invisible aspects of agents in interaction, it assumes the capacity of agents to integrate disruptions, opacity and misunderstandings in mutual modulation. Invisibility is classified as the dialectical counterpart of visibility, i.e., as a lack of sense whereby the dynamics of perpetual asking, of coping with each other and of improvements in interpretation are brought into play. By means of empirical exemplification this article aims at demonstrating aspects of invisibility in social interaction which complement the enactive interpretation. Without falling back into Cartesianism, it shows through dramaturgical analysis of a practice called “(Inter)acting with the inner partner” that social interaction includes elements of opacity and invisibility whose role is performative. This means that opacity is neither an obstacle to be overcome with more precise understanding nor a lack of meaning, but rather an excess of sense, a “hiddenness” of something real that has an “active power” (Merleau-Ponty). In this way it contributes to on-going social understanding as a hidden potentiality that naturally enriches, amplifies and in part constitutes human participation in social interactions. It is also shown here that this invisible excess of sense already functions on the level of self-relationship due to the essential self-opacity and self-alterity of each agent of social interaction. The analysis consequently raises two issues: the question of the enactive ethical stance toward the alterity of the other and the question of the autonomy of the

  14. Vitamin paradox in obesity: Deficiency or excess?

    PubMed

    Zhou, Shi-Sheng; Li, Da; Chen, Na-Na; Zhou, Yiming

    2015-08-25

    Since synthetic vitamins were used to fortify food and as supplements in the late 1930s, vitamin intake has significantly increased. This has been accompanied by an increased prevalence of obesity, a condition associated with diabetes, hypertension, cardiovascular disease, asthma and cancer. Paradoxically, obesity is often associated with low levels of fasting serum vitamins, such as folate and vitamin D. Recent studies on folic acid fortification have revealed another paradoxical phenomenon: obesity exhibits low fasting serum but high erythrocyte folate concentrations, with high levels of serum folate oxidation products. High erythrocyte folate status is known to reflect long-term excess folic acid intake, while increased folate oxidation products suggest an increased folate degradation because obesity shows an increased activity of cytochrome P450 2E1, a monooxygenase enzyme that can use folic acid as a substrate. There is also evidence that obesity increases niacin degradation, manifested by increased activity/expression of niacin-degrading enzymes and high levels of niacin metabolites. Moreover, obesity most commonly occurs in those with a low excretory reserve capacity (e.g., due to low birth weight/preterm birth) and/or a low sweat gland activity (black race and physical inactivity). These lines of evidence raise the possibility that low fasting serum vitamin status in obesity may be a compensatory response to chronic excess vitamin intake, rather than vitamin deficiency, and that obesity could be one of the manifestations of chronic vitamin poisoning. In this article, we discuss vitamin paradox in obesity from the perspective of vitamin homeostasis.

  15. Prevalence of third molar impaction in orthodontic patients treated nonextraction and with extraction of 4 premolars.

    PubMed

    Kim, Tae-Woo; Artun, Jon; Behbehani, Faraj; Artese, Flavia

    2003-02-01

    The purposes of this study were to confirm that premolar extraction treatment is associated with mesial movement of the molars concomitant with an increase in the eruption space for the third molars and to test the hypothesis that such treatment reduces the frequency of third molar impaction. Lateral cephalograms, panoramic or periapical radiographs, and study models made before (T1) and after (T2) treatment and a minimum of 10 years postretention (T3) of 157 patients were selected from the postretention sample at the Department of Orthodontics of the University of Washington, Seattle. Treatment for 105 patients included the extraction of 4 premolars; the other 53 were treated nonextraction. These patients represented all the extraction and nonextraction patients in the sample who had at least 1 third molar at T1 or T2 and who showed evidence of full eruption or closure of the root apex at T2 or T3. Student t tests showed higher scores for third molar impaction (P <.01), less mesial movement of the molars from T1 to T2 (P <.01), and smaller retromolar space at T2 (P <.001) in both arches of the nonex patients than in the ex patients. Similarly, molar movement was more mesial from T1 to T2 in the maxilla (P <.01) and in the mandible (P <.05), and the retromolar space was larger in both arches (P <.001) of the patients with eruption than in those with impaction of the third molars. Our results suggest that premolar extraction therapy reduces the frequency of third molar impaction because of increased eruption space concomitant with mesial movement of the molars during space closure.

  16. Comparison of Primary Molar Crown Dimensions with Stainless Steel Crowns in a Sample of Iranian Children

    PubMed Central

    Afshar, Hossein; Kamali Sabeti, Arghavan; Shahrabi, Mahdi

    2015-01-01

    Background and aims. Due to anatomic variation in tooth anatomy between populations, this study compared the buccolingual (BL) and mesiodistal (MD) dimensions of primary molars with those of stainless steel crowns (SSCs) in anIranian population. Materials and methods. Impressions were taken from both dental arches of children, and casts were poured. Teeth with caries, restoration, hypoplasia or other dental anomalies were excluded. 216 primary molars were selected and divided into 4 groups of 54 each (maxillary and mandibular first and second primary molars). MD/BL dimensions were measured using a digital caliper with 0.01 mm precision on casts and SCCs (3M brand). Data were assessed using paired t-test, post hoc test and ANOVA. P < 0.05 was considered statistically significant. Results. The MD dimension of the lower first molar SSC and the BL dimension of the lower second molar SSC had the least difference with the corresponding values of the respective teeth. The MD dimension of the upper second molar SSC and the BL dimension of the upper first molar SSC had the greatest difference with the corresponding values in the respective teeth. Comparison of the two different brands of SSCs for the upper first molar revealed that both types had significant differences with the teeth in terms of both MD (P = 0.0) and BL (P = 0.0) dimensions. Conclusion. In the studied population, best adaptation was seen in second lower molars and the least adaptationswere seen in first and second upper molars. PMID:26236433

  17. Dietary Inference from Upper and Lower Molar Morphology in Platyrrhine Primates

    PubMed Central

    Allen, Kari L.; Cooke, Siobhán B.; Gonzales, Lauren A.; Kay, Richard F.

    2015-01-01

    The correlation between diet and dental topography is of importance to paleontologists seeking to diagnose ecological adaptations in extinct taxa. Although the subject is well represented in the literature, few studies directly compare methods or evaluate dietary signals conveyed by both upper and lower molars. Here, we address this gap in our knowledge by comparing the efficacy of three measures of functional morphology for classifying an ecologically diverse sample of thirteen medium- to large-bodied platyrrhines by diet category (e.g., folivore, frugivore, hard object feeder). We used Shearing Quotient (SQ), an index derived from linear measurements of molar cutting edges and two indices of crown surface topography, Occlusal Relief (OR) and Relief Index (RFI). Using SQ, OR, and RFI, individuals were then classified by dietary category using Discriminate Function Analysis. Both upper and lower molar variables produce high classification rates in assigning individuals to diet categories, but lower molars are consistently more successful. SQs yield the highest classification rates. RFI and OR generally perform above chance. Upper molar RFI has a success rate below the level of chance. Adding molar length enhances the discriminatory power for all variables. We conclude that upper molar SQs are useful for dietary reconstruction, especially when combined with body size information. Additionally, we find that among our sample of platyrrhines, SQ remains the strongest predictor of diet, while RFI is less useful at signaling dietary differences in absence of body size information. The study demonstrates new ways for inferring the diets of extinct platyrrhine primates when both upper and lower molars are available, or, for taxa known only from upper molars. The techniques are useful in reconstructing diet in stem representatives of anthropoid clade, who share key aspects of molar morphology with extant platyrrhines. PMID:25738266

  18. Characterization of stem and progenitor cells in the dental pulp of erupted and unerupted murine molars

    PubMed Central

    Balic, Anamaria; Aguila, H. Leonardo; Caimano, Melissa J.; Francone, Victor P.; Mina, Mina

    2010-01-01

    In the past few years there have been significant advances in the identification of putative stem cells also referred to as “mesenchymal stem cells” (MSC) in dental tissues including the dental pulp. It is thought that MSC in dental pulp share certain similarities with MSC isolated from other tissues. However, cells in dental pulp are still poorly characterized. This study focused on the characterization of progenitor and stem cells in dental pulps of erupted and unerupted mice molars. Our study showed that dental pulps from unerupted molars contain a significant number of cells expressing CD90+/CD45-, CD117+/CD45-, Sca-1+/CD45- and little if any CD45+ cells. Our in vitro functional studies showed that dental pulp cells from unerupted molars displayed extensive osteo-dentinogenic potential but were unable to differentiate into chondrocytes and adipocytes. Dental pulp from erupted molars displayed a reduced number of cells, contained higher percentage of CD45+ and lower percentage of cells expressing CD90+/CD45-, CD117+/CD45- as compared to unerupted molars. In vitro functional assays demonstrated the ability of a small fraction of cells to differentiate into odontoblasts, osteoblasts, adipocytes and chondrocytes. There was a significant reduction in the osteo-dentinogenic potential of the pulp cells derived from erupted molars compared to unerupted molars. Furthermore, the adipogenic and chondrogenic differentiation of pulp cells from erupted molars was dependent on a long induction period and infrequent. Based on these findings we propose that the dental pulp of the erupted molars contain a small population of multipotent cells, whereas the dental pulp of the unerupted molars does not contain multipotent cells but is enriched in osteo-dentinogenic progenitors engaged in the formation of coronal and radicular odontoblasts. PMID:20193787

  19. 26 CFR 54.4981A-1T - Tax on excess distributions and excess accumulations (temporary).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... applies to estates of decedents dying after December 31, 1986 (see Q&A d-11 of this section). Excess... employee's benefits under the plan is distributed to an individual, how are the distribution of such... the special grandfather rule. b-3: Q. How does an eligible individual make a valid election to use...

  20. 26 CFR 54.4981A-1T - Tax on excess distributions and excess accumulations (temporary).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... applies to estates of decedents dying after December 31, 1986 (see Q&A d-11 of this section). Excess... employee's benefits under the plan is distributed to an individual, how are the distribution of such... the special grandfather rule. b-3: Q. How does an eligible individual make a valid election to use...

  1. 26 CFR 54.4981A-1T - Tax on excess distributions and excess accumulations (temporary).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... applies to estates of decedents dying after December 31, 1986 (see Q&A d-11 of this section). Excess... employee's benefits under the plan is distributed to an individual, how are the distribution of such... the special grandfather rule. b-3: Q. How does an eligible individual make a valid election to use...

  2. 26 CFR 54.4981A-1T - Tax on excess distributions and excess accumulations (temporary).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... applies to estates of decedents dying after December 31, 1986 (see Q&A d-11 of this section). Excess... employee's benefits under the plan is distributed to an individual, how are the distribution of such... the special grandfather rule. b-3: Q. How does an eligible individual make a valid election to use...

  3. 26 CFR 54.4981A-1T - Tax on excess distributions and excess accumulations (temporary).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... applies to estates of decedents dying after December 31, 1986 (see Q&A d-11 of this section). Excess... employee's benefits under the plan is distributed to an individual, how are the distribution of such... the special grandfather rule. b-3: Q. How does an eligible individual make a valid election to use...

  4. 26 CFR 54.4979-1 - Excise tax on certain excess contributions and excess aggregate contributions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) General rule. In the case of any plan (as defined in paragraph (b)(3) of this section), there is imposed a...) Special rule for simplified employee pensions—(i) An employer that maintains a simplified employee pension... contributions made—(1) General rule. No tax is imposed under this section on any excess contribution or...

  5. Complications in surgical removal of mandibular third molars.

    PubMed

    Clauser, B; Barone, R; Briccoli, L; Baleani, A

    2009-01-01

    The most frequent complications after surgical removal of an impacted mandibular third molar are the following: alveolar osteitis, infections, neurological damage involving the inferior alveolar and lingual nerves. All of these postoperative complications are more frequent in older patients. Their increase starts at about 25 years of age. Alveolar osteitis is the most frequent postoperative complication, but it is easily handled; its pathogenesis remains unknown, even if cigarette smoking enhances its incidence; other putative risk factors have not been confirmed. An effective etiologic therapy is not yet available, but the symptoms can be managed by means of local medication. Postoperative infections can still cause very severe problems, especially in elderly patients, if the treatment is not correct and timely. Antibiotic prophylaxis is indicated in selected cases. The possibility of neurological complications is often associated with anxiety both in the patient and doctor: fortunately, their incidence has been lowered by improved surgical techniques; moreover, risk indicators have been identified on the panoramic radiographs; three-dimensional imaging is useful in planning the surgical intervention in risky cases.

  6. Biodentine Pulpotomy in Mature Permanent Molar: A Case Report

    PubMed Central

    2016-01-01

    Irreversible pulpitis is the most common reason for endodontic treatment in primary and permanent teeth. Root canal therapy and extraction are the two viable and most documented treatment options for the same. Studies with regards to management of mature permanent teeth with carious exposure and treatment with vital pulp therapies such as adult permanent tooth pulpotomy are scarce. However, permanent tooth pulpotomy with the new calcium-silicate based cements (Mineral Trioxide Aggregate and Biodentine) can help preserve the tooth pulp vitality and promote healing and repair foregoing the more invasive root canal therapy procedure. A 12-year old male patient with irreversible pulpitis in right mandibular first permanent molar was treated with complete coronal pulpotomy with placement of Biodentine in the pulp chamber and a full coronal coverage using stainless steel crown. Clinical and radiographic examinations were performed at three, six, twelve and eighteen months. At the end of 18 months, the patient was completely asymptomatic and the tooth was free of any clinical and radiographic signs of inflammation and infection. PMID:27630966

  7. Molar crown inner structural organization in Javanese Homo erectus.

    PubMed

    Zanolli, Clément

    2015-01-01

    This contribution investigates the inner organizational pattern (tooth tissue proportions and enamel-dentine junction morphology) of seven Homo erectus permanent molar crowns from the late Lower-early Middle Pleistocene Kabuh Formation of the Sangiran Dome (Central Java, Indonesia). The previous study of their external characteristics confirmed the degree of time-related structural reduction occurred in Javanese H. erectus, and also revealed a combination of nonmetric features which are rare in the Lower and early Middle Pleistocene dental record, but more frequently found in recent humans. In accordance with their outer occlusal morphology, the specimens exhibit a set of derived internal features, such as thick to hyperthick enamel, an incomplete expression of the crest patterns at the enamel-dentine junction (EDJ) level, a sharp EDJ topography. As a whole, these features differ from those expressed in some penecontemporaneous specimens/samples representing African H. erectus/ergaster and H. heidelbergensis, as well as in Neanderthals, but occur in recent human populations. Further research in virtual dental paleoanthropology to be developed at macroregional scale would clarify the polarity and intensity of the intermittent exchanges between continental and insular Southeast Asia around the Lower to Middle Pleistocene boundary, as well as should shed light on the still poorly understood longitudinal evolutionary dynamics across continental Asia.

  8. What Counts as Behavior? The Molar Multiscale View.

    PubMed

    Baum, William M

    2013-01-01

    Because the definition of behavior changes as our understanding of behavior changes, giving a final definition is impossible. One can, however, rule out some possibilities and propose some others based on what we currently know. Behavior is not simply movement, but must be defined by its function. Also, our understanding of behavior must agree with evolutionary theory. I suggest 4 basic principles: (a) only whole organisms behave; (b) behavior is purposive; (c) behavior takes time; and (d) behavior is choice. Saying that parts of an organism behave is nonsense, and, moreover, evolutionary theory explains the existence of organisms mainly through their adaptive behavior. Behavior is purposive in that behavior is shaped by its consequences, through an organism's lifetime or through interactions with the environment across many generations of natural selection. Behavior takes time in that behavior is interaction with the environment that cannot take place at a moment. Moreover, at a moment in time, one cannot definitely identify the function of behavior. Identification of an activity requires a span of time. Behavior is choice in the sense that a suitable span of time always includes time spent in more than 1 activity. Activities include parts that are themselves activities on a smaller time scale and compete for time. Thus, behavior constitutes time allocation. An accounting problem arises whenever any behavior is attributed to multiple consequences. In the molar multiscale view, this raises the question of whether 2 activities can occur at the same time. The question remains open.

  9. Mass or molar? Recommendations for reporting concentrations of therapeutic drugs.

    PubMed

    Jones, Graham R D; Bryant, Stewart; Fullinfaw, Robert; Ilett, Ken; Miners, John O; Morris, Raymond G; Doogue, Matthew P

    2013-04-15

    A working party (WP) from the Australasian Association of Clinical Biochemists, Australasian Society of Clinical and Experimental Pharmacologists and Toxicologists, Royal College of Pathologists of Australasia and Royal Australasian College of Physicians recommends the following: *mass units should be used for reporting therapeutic drug concentrations in Australia and New Zealand; and the litre (L) should be used as the denominator when expressing concentration. Examples of these units are mg/L and μg/L Exceptions to these principles include: *drugs for which there is current uniformity of reporting and supporting information using molar units, notably lithium (mmol/L) and methotrexate (μmol/L); *drugs that are also present as endogenous substances, where the units used routinely should continue to be used. This applies to many substances, including minerals (eg, iron; μmol/L), vitamins (eg, vitamin D; nmol/L) and hormones (eg, thyroxine; pmol/L). *drugs for which the denominator is not a 198 of fluid and there is international uniformity of reporting (eg, thiopurine metabolites; per 109 red blood cells). These recommendations relate to drugs that are used therapeutically, whether measured for therapeutic drug monitoring purposes or for assessment of overdose. Other substances, such as drugs of misuse, heavy metals or environmental toxins, were not considered by the WP and are thus not covered by this document. These recommendations should also be applied to other supporting documentation such as published guidelines, journal articles and websites. The implementation of these recommendations in New Zealand is subject to local confirmation.

  10. Use of opioid pain relievers following extraction of third molars.

    PubMed

    Weiland, Breanna M; Wach, Anthony G; Kanar, Brent P; Castele, Matthew T; Sosovicka, Mark F; Cooke, Matthew R; Moore, Paul A

    2015-02-01

    Following extraction of third molars, it is common practice for oral and maxillofacial surgeons to provide a prescription for an opioid-containing analgesic such as hydrocodone with acetaminophen. Because the instructions for use most often indicate that these analgesics are to be taken "as needed for pain," it is unknown how many of the prescribed postoperative analgesic tablets are needed and actually taken. Therefore, an assessment of patient pain experiences and actual opioid analgesic usage was carried out using structured telephone interviews of patients performed 1 and 7 days following their thirdmolar extraction surgery. Forty-eight adolescents and young adults, ages 15 to 30 years, participated in this assessment. A review of the surgeon's notes indicated that the median number of prescribed opioid-containing analgesics (ie, Vicodin®, Norco®, Lorcet®, Percocet®) was 20 tablets (range 10 to 40). The median consumption during the first 24 hours was reported to be three tablets (range 0 to 10), and the total consumption for all 7 days was eight tablets (range 0 to 34). Four patients reported nausea or vomiting in the first 24 hours, and six patients reported nausea or vomiting during the following 6 days of recovery. The initial prescriptions provided adequate relief for 45 of the 48 patients. Higher consumption of opioid pain relievers (OPRs) was associated with a longer duration of surgery and the occurrence of postoperative infections.

  11. MTA pulpotomy of human permanent molars with irreversible pulpitis.

    PubMed

    Eghbal, Mohammad Jafar; Asgary, Saeed; Baglue, Reza Ali; Parirokh, Masoud; Ghoddusi, Jamileh

    2009-04-01

    The histological success of mineral trioxide aggregate (MTA) pulpotomy for treatment of irreversible pulpitis in human teeth as an alternative treatment was investigated in this study. Fourteen molars which had to be extracted were selected from patients 16-28 years old. The selection criteria include carious pulp exposure with a history of lingering pain. After isolation, caries removal and pulp exposure, MTA was used in pulpotomy treatment. Patients were evaluated for pain after 24 h. Two patients were lost from this study. Twelve teeth were extracted after 2 months and were assessed histologically. Recall examinations confirmed that none of the patients experienced pain after pulpotomy. Histological observation revealed that all samples had dentin bridge formation completely and that the pulps were vital and free of inflammation. Although the results favour the use of MTA as a pulpotomy material, more studies with larger samples and a longer recall period are suggested to justify the use of MTA for treatment of irreversible pulpitis in human permanent teeth.

  12. Experience versus complication rate in third molar surgery

    PubMed Central

    Jerjes, Waseem; El-Maaytah, Mohammed; Swinson, Brian; Banu, Bilquis; Upile, Tahwinder; D'Sa, Sapna; Al-Khawalde, Mohammed; Chaib, Boussad; Hopper, Colin

    2006-01-01

    Objectives The records of 1087 patients who underwent surgical removal of third molar teeth were prospectively examined to analyse the possible relationship between postoperative complications and the surgeon's experience parameter. Method and materials Seven surgeons (three specialists in surgical dentistry [specialists SD] and four oral and maxillofacial Senior House Officers [OMFS residents]) carried out the surgical procedures. For each patient, several variables were recorded including age, gender, radiographic position of extracted teeth, treating surgeon, duration of surgery and postoperative complications. Results Analysis of the data revealed some differences in the incidence of complications produced by the specialists SD and OMFS residents. The main statistically relevant differences were increase the incidences of trismus, nerve paraesthesia, alveolar osteitis and infection in the resident-treated group, while the specialist-treated group showed higher rates of post-operative bleeding. Conclusion The higher rate of postoperative complications in the resident-treated group suggests that at least some of the complications might be related to surgical experience. Further work needs to compare specialists of training programmes with different years of experience, using large cross – sectional studies. PMID:16725024

  13. Removal of an Upper Third Molar from the Maxillary Sinus

    PubMed Central

    Amorim, Klinger de Souza; da Silva, Vanessa Tavares; da Cunha, Rafael Soares; Souto, Maria Luisa Silveira; São Mateus, Carla Rocha; Souza, Liane Maciel de Almeida

    2015-01-01

    The maxillary sinus or antrum is the largest of the paranasal sinuses. It is located in the maxillary bone and has a proximity to the apexes of upper molars and premolars, which allows it to form a direct link between the sinus and the oral cavity. Dislocation of a foreign body or tooth to the interior of a paranasal sinus is a situation that can occur as a result of car accidents, firearm attacks, or iatrogenic in surgical procedures. Therefore, it is necessary to know how to treat this kind of situation. This study's objective is to report the case of a 23-year-old female patient, leucoderma, who sought treatment from the Surgical Unit at the Dental Faculty of the Federal University of Sergipe. She had a history of pain and edema in the right side of the genian region and two failed attempts at removing dental unit (DU) 18. The extraoral clinical exam revealed intense edema of the left hemiface with signs of infection, excoriation of the labial commissure, hematoma, a body temperature of 39°C, and a limited ability to open her mouth. The patient was medicated and treated surgically. The tooth was removed from the maxillary sinus with caution, as should have been done initially. PMID:25705524

  14. Enamel prism morphology in molar teeth of small eutherian mammals.

    PubMed

    Dumont, E R

    1996-01-01

    Data summarizing enamel prism shape, size and spacing are reported for the molar enamel of 55 species of small eutherian mammals including primates, bats, tree shrews, flying lemurs, insectivorans and representatives of a variety of fossil families. Confocal photomicrographs reveal that the subsurface enamel of most species is characterized by arc-shaped prisms. The lack of a clear distinction between pattern 2 and pattern 3 prism configurations within single specimens suggests that the broad category "arc-shaped prisms" is the most appropriate descriptive grouping for these species. Of the total sample, three species exhibit only circular prisms while no evidence of prismatic enamel was found in two bats. Prism shape is not an informative phylogenetic character at the ordinal level for these morphologically primitive and relatively thin-enameled taxa. Significant differences between species in several prism size and spacing variables (central distance between prisms, prism diameter, prism area and the ratio of prism area to estimated ameloblast area) suggest the potential for further analyses of quantitative variation to document evolutionary relationships within or among family-level groups.

  15. Molar incisor hypomineralization in HIV-infected children and adolescents.

    PubMed

    Andrade, Natália Silva; Pontes, Alessandra Silva; de Sousa Paz, Hélvis Enri; de Moura, Marcoeli Silva; Moura, Lúcia de Fátima Almeida de Deus; Lima, Marina de Deus Mourade

    2017-01-01

    The objective was to determine the prevalence of molar incisor hypomineralization (MIH) among individuals between 7 and 15 years old infected or noninfected with human immunodeficiency virus (HIV). The study was conducted with 33 HIV-infected individuals (study group; SG) and 66 non-HIV-infected schoolchildren (control group; CG), paired by gender and age. Data collection was based on medical records (SG), a questionnaire for caregivers and oral examination for diagnosis of MIH (European Academy of Pediatric Dentistry criteria) and caries (DMFT index and ICDAS). Data were analyzed with Mann-Whitney, chi-square, and Fisher's exact tests and logistic regression. In SG, MIH (45.5%) and caries (87.9%) had higher prevalence. MIH was associated with use of protease inhibitors in SG (OR: 2.14; 95% CI: 1.21 to 3.77) and incubator need in CG (OR: 2.80; 95% CI: 1.71 to 9.10). HIV-infected patients had a higher prevalence of MIH and dental caries in the permanent dentition.

  16. What Counts as Behavior? The Molar Multiscale View

    PubMed Central

    2013-01-01

    Because the definition of behavior changes as our understanding of behavior changes, giving a final definition is impossible. One can, however, rule out some possibilities and propose some others based on what we currently know. Behavior is not simply movement, but must be defined by its function. Also, our understanding of behavior must agree with evolutionary theory. I suggest 4 basic principles: (a) only whole organisms behave; (b) behavior is purposive; (c) behavior takes time; and (d) behavior is choice. Saying that parts of an organism behave is nonsense, and, moreover, evolutionary theory explains the existence of organisms mainly through their adaptive behavior. Behavior is purposive in that behavior is shaped by its consequences, through an organism's lifetime or through interactions with the environment across many generations of natural selection. Behavior takes time in that behavior is interaction with the environment that cannot take place at a moment. Moreover, at a moment in time, one cannot definitely identify the function of behavior. Identification of an activity requires a span of time. Behavior is choice in the sense that a suitable span of time always includes time spent in more than 1 activity. Activities include parts that are themselves activities on a smaller time scale and compete for time. Thus, behavior constitutes time allocation. An accounting problem arises whenever any behavior is attributed to multiple consequences. In the molar multiscale view, this raises the question of whether 2 activities can occur at the same time. The question remains open. PMID:28018040

  17. Variability of Australopithecus second maxillary molars from Sterkfontein Member 4.

    PubMed

    Fornai, Cinzia; Bookstein, Fred L; Weber, Gerhard W

    2015-08-01

    The question of how many Australopithecus species lived at Sterkfontein Member 4 and Makapansgat continues to be controversial inasmuch as the fossils are poorly preserved, the stratigraphy is difficult to interpret, and the cranial, dental, and postcranial remains are mostly not associated. To proceed we applied the most intensive modern methods of 3D geometric morphometrics to dental form, specifically the shapes of the upper second molars (M(2)s) in a sample combining 13 Australopithecus, 11 Paranthropus, and 23 Homo. We analyzed outer and inner crown surfaces, as well as crown and cervical outlines both separately and together, using a total of 16 landmarks, 51 curve semilandmarks, and 48 pseudolandmarks over the four structures. Outer and inner enamel surfaces are highly correlated in this dataset, while crown outline is the least informative of the four structures. Homo was easily distinguished from both Australopithecus and Paranthropus by these methods, likewise Homo sapiens from Homo neanderthalensis. There were, however, no stable classes within the Australopithecus sample or between Australopithecus and Paranthropus. Instead, there was a gradient along which Australopithecus prometheus and Australopithecus africanus lie toward the extremes, with Paranthropus overlapping both. If there are indeed different species at this site, then either their M(2) morphologies are uninformative or else the present sample is too small to make an accurate assessment. Our findings suggest that the variability of the Australopithecus specimens will be difficult to interpret authoritatively, independent of the method used.

  18. 7 CFR 929.61 - Outlets for excess cranberries.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Outlets for excess cranberries. 929.61 Section 929.61... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... excess cranberries. (a) Noncommercial outlets. Excess cranberries may be disposed of in...

  19. 7 CFR 929.104 - Outlets for excess cranberries.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Outlets for excess cranberries. 929.104 Section 929... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES... excess cranberries. (a) In accordance with § 929.61, excess cranberries may be disposed of only in...

  20. 7 CFR 929.104 - Outlets for excess cranberries.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Outlets for excess cranberries. 929.104 Section 929... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES... excess cranberries. (a) In accordance with § 929.61, excess cranberries may be disposed of only in...

  1. 7 CFR 929.61 - Outlets for excess cranberries.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Outlets for excess cranberries. 929.61 Section 929.61... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... excess cranberries. (a) Noncommercial outlets. Excess cranberries may be disposed of in...

  2. 7 CFR 929.104 - Outlets for excess cranberries.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Outlets for excess cranberries. 929.104 Section 929... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES... excess cranberries. (a) In accordance with § 929.61, excess cranberries may be disposed of only in...

  3. 7 CFR 929.61 - Outlets for excess cranberries.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Outlets for excess cranberries. 929.61 Section 929.61... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... excess cranberries. (a) Noncommercial outlets. Excess cranberries may be disposed of in...

  4. 7 CFR 929.61 - Outlets for excess cranberries.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Outlets for excess cranberries. 929.61 Section 929.61... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... excess cranberries. (a) Noncommercial outlets. Excess cranberries may be disposed of in...

  5. 7 CFR 929.61 - Outlets for excess cranberries.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Outlets for excess cranberries. 929.61 Section 929.61... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE CRANBERRIES GROWN IN STATES OF... excess cranberries. (a) Noncommercial outlets. Excess cranberries may be disposed of in...

  6. 48 CFR 52.211-17 - Delivery of Excess Quantities.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Delivery of Excess....211-17 Delivery of Excess Quantities. As prescribed in 11.703(b), insert the following clause: Delivery of Excess Quantities (SEP 1989) The Contractor is responsible for the delivery of each...

  7. 48 CFR 52.211-17 - Delivery of Excess Quantities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Delivery of Excess....211-17 Delivery of Excess Quantities. As prescribed in 11.703(b), insert the following clause: Delivery of Excess Quantities (SEP 1989) The Contractor is responsible for the delivery of each...

  8. 20 CFR 416.1324 - Suspension due to excess resources.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Suspension due to excess resources. 416.1324... AGED, BLIND, AND DISABLED Suspensions and Terminations § 416.1324 Suspension due to excess resources... payments because of excess resources is required effective with the month in which: (1)...

  9. 20 CFR 416.1324 - Suspension due to excess resources.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Suspension due to excess resources. 416.1324... AGED, BLIND, AND DISABLED Suspensions and Terminations § 416.1324 Suspension due to excess resources... payments because of excess resources is required effective with the month in which: (1)...

  10. 20 CFR 416.1324 - Suspension due to excess resources.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Suspension due to excess resources. 416.1324... AGED, BLIND, AND DISABLED Suspensions and Terminations § 416.1324 Suspension due to excess resources... payments because of excess resources is required effective with the month in which: (1)...

  11. 20 CFR 416.1324 - Suspension due to excess resources.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Suspension due to excess resources. 416.1324... AGED, BLIND, AND DISABLED Suspensions and Terminations § 416.1324 Suspension due to excess resources... payments because of excess resources is required effective with the month in which: (1)...

  12. 46 CFR 154.550 - Excess flow valve: Bypass.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Excess flow valve: Bypass. 154.550 Section 154.550 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.550 Excess flow valve: Bypass. If the excess flow valve allowed...

  13. 46 CFR 154.546 - Excess flow valve: Closing flow.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Excess flow valve: Closing flow. 154.546 Section 154.546... and Process Piping Systems § 154.546 Excess flow valve: Closing flow. (a) The rated closing flow of vapor or liquid cargo for an excess flow valve must be specially approved by the Commandant (CG-522)....

  14. Quantitative determination of total molar concentrations of bioaccumulatable organic micropollutants in water using C18 empore disk and molar detection techniques.

    PubMed

    van Loon, W M; Wijnker, F G; Verwoerd, M E; Hermens, J L

    1996-09-01

    A highly sensitive and quantitative group parameter to determine total molar concentrations of organic micropollutants that can bioaccumulate in the lipid phase of aquatic organisms from effluents, surface water, and drinking water has been developed. C18 empore disk was used as a surrogate lipid phase. The partition process between water and C18 empore disk was employed to simulate the bioaccumulation process. After partition extraction of the water sample, the empore disk was extracted with cyclohexane, and total molar concentrations were determined in these extracts using vapor pressure osmometry (VPO) and gas chromatography/mass spectrometry (GC/MS), respectively. Total molar concentrations bioaccumulated in aquatic biota were estimated from the cyclohexane concentrations. Good accuracy for the total molar determination was obtained using VPO, due to the practically constant molar response factors (43.1 +/- 1.7 V/M) for a wide compound range and to excellent additivity of individual compound responses. Satisfying reproducibility (0-8.3%) of VPO was obtained for sample extracts. The detection limit of VPO in cyclohexane extracts corresponded to 0.60 mM in the lipid phase of aquatic biota. A minimal separation GC/MS system was developed, which enabled highly sensitive and sufficiently accurate total molar determinations. The reproducibility of the GC/MS determination for samples ranged from 0.7 to 22%. The detection limit of GC/MS in cyclohexane extracts corresponded to 0.044 mM in the lipid phase. The determined total molar concentrations in the lipid phase of aquatic biota were in the range of 0.139-168 mM for effluents, 0.26-1.34 mM for surface water systems, and < 0.044 mM for drinking water.

  15. The Molar Volume of FeO-MgO-Fe2O3-Cr2O3-Al2O3-TiO2 Spinels

    NASA Astrophysics Data System (ADS)

    Hamecher, E. A.; Antoshechkina, P. M.; Ghiorso, M. S.; Asimow, P. D.

    2011-12-01

    A new model of molar volume has been calibrated in the spinel supersystem (Mg,Fe2+)(Al,Cr,Fe3+)2O4 - (Mg,Fe2+)2TiO4. A total of 832 X-ray and neutron diffraction experiments performed on spinels at ambient and in situ high-P, T conditions (from the American Mineralogist Crystal Structure Database (Downs and Hall-Wallace, 2003) and other sources) were used to calibrate end-member equations of state and an excess volume model for this system. The effect on molar volume of cation ordering over the octahedral and tetrahedral sites is captured with linear dependence on Mg2+, Al3+, and Fe3+ site occupancy terms. We allowed standard state volumes and coefficients of thermal expansion of the end members to vary within their uncertainties during extraction of the mixing properties, in order to achieve the best fit. Published equations of states of the various spinel end members were analyzed to obtain optimal values of the bulk modulus and its pressure derivative, for each explicit end member. For any spinel composition in the supersystem, the model molar volume is obtained by adding excess volume and cation order-dependent terms to a linear combination of the five end member volumes, estimated at pressure and temperature using the high-T Vinet equation of state. The model has a total of 31 parameters and fits nearly all experiments to within 0.02 J/bar/mol, or better than 0.5% in volume. The model is compared to the current MELTS (Ghiorso and Sack, 1995; Ghiorso et al., 2002) spinel model with a demonstration of the impact of the model difference on the estimated spinel-garnet lherzolite transition pressure. Our primary motivation in this work is the development of a comprehensive spinel molar volume model for use in calibration of activity-composition models of garnet and pyroxene solid solutions. The thermodynamic models, along with a new silicate liquid equation of state, will be incorporated into the next generation MELTS model, xMELTS. The new solid solution models

  16. Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials

    PubMed Central

    Nazari, Vahideh; Ghodsi, Safoura; Alikhasi, Marzieh; Shamshiri, Ahmad Reza

    2016-01-01

    Objectives: Fracture strength is an important factor influencing the clinical long-term success of implant-supported prostheses especially in high stress situations like excessive crown height space (CHS). The purpose of this study was to compare the fracture strength of implant-supported fixed partial dentures (FPDs) with excessive crown height, fabricated from three different materials. Materials and Methods: Two implants with corresponding abutments were mounted in a metal model that simulated mandibular second premolar and second molar. Thirty 3-unit frameworks with supportive anatomical design were fabricated using zirconia, nickel-chromium alloy (Ni-Cr), and polyetheretherketone (PEEK) (n=10). After veneering, the CHS was equal to 15mm. Then; samples were axially loaded on the center of pontics until fracture in a universal testing machine at a crosshead speed of 0.5 mm/minute. The failure load data were analyzed by one-way ANOVA and Games-Howell tests at significance level of 0.05. Results: The mean failure loads for zirconia, Ni-Cr and PEEK restorations were 2086±362N, 5591±1200N and 1430±262N, respectively. There were significant differences in the mean failure loads of the three groups (P<0.001). The fracture modes in zirconia, metal ceramic and PEEK restorations were cohesive, mixed and adhesive type, respectively. Conclusions: According to the findings of this study, all implant supported three-unit FPDs fabricated of zirconia, metal ceramic and PEEK materials are capable to withstand bite force (even para-functions) in the molar region with excessive CHS. PMID:28243301

  17. Posterior fixation suture and convergence excess esotropia.

    PubMed

    Steffen; Auffarth; Kolling

    1998-09-01

    The present study investigates the results of Cuppers' 'Fadenoperation' in patients with non-accommodative convergence excess esotropia. Particular attention is given to postoperative eye alignment at distance fixation. Group 1 (n=96) included patients with a 'normal' convergence excess. The manifest near angles (mean ET 16.73 degrees +/- 6.33 degrees, range 4 degrees -33 degrees ) were roughly twice the size of the distance angles (mean ET 6.50 degrees +/- 3.62 degrees, range 0 degrees -14 degrees ). These patients were treated with a bilateral fadenoperation of the medial recti without additional eye muscle surgery. Three months after surgery, the mean postoperative angles were XT 0.5 degrees +/- 3.3 degrees (range XT 11 degrees -ET 5 degrees ) for distance fixation, and ET 2.7 degrees +/- 3.6 degrees (range XT 5 degrees -ET 14 degrees ) for near fixation, respectively. Postoperative convergent angles at near fixation >ET 10 degrees were present in two patients (1.9%). Group 2 (n=21) included patients with a mean preoperative distance angle of ET 9.2 degrees +/- 3.7 degrees (range 6 degrees -16 degrees ) and a mean preoperative near angle of ET 23.4 degrees +/- 3.1 degrees (range 16 degrees -31 degrees ). These patients were operated on with a bilateral fadenoperation of the medial recti and a simultaneous recession of one or both medial rectus muscles. Mean postoperative angles were XT 0.5 degrees +/- 4.6 degrees (range XT 12 degrees -ET 7 degrees ) for distance fixation and ET 1.4 degrees +/- 4.5 degrees (range XT 8 degrees -ET 13 degrees ) for near fixation, respectively. In this group, 2 patients (10.6%) had a postoperative exotropia >XT 5 degrees at distance fixation, and two patients had residual esotropia>ET 10 degrees at near fixation. Group 3 (n=17) included patients with a pronounced non-accommodative convergence excess. Near angle values (mean of 17.8 degrees +/- 5.3 degrees, range ET 7 degrees -26 degrees ) were several times higher than the distance

  18. 75 FR 30846 - Monthly Report of Excess Income and Annual Report of Uses of Excess Income (Correction)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-02

    ... URBAN DEVELOPMENT Monthly Report of Excess Income and Annual Report of Uses of Excess Income (Correction... lists the following information: Title of Proposal: Monthly Report of Excess Income and Annual Report of..., Jr., Reports Management Officer, QDAM, Department of Housing and Urban Development, 451...

  19. Loss of Permanent First Molars in the Mixed Dentition: Circumstances Resulting in Extraction and Requiring Orthodontic Management.

    PubMed

    Mathu-Muju, Kavita R; Kennedy, David B

    2016-10-15

    Extraction of significantly compromised permanent first molars may be indicated during the mixed dentition stage of occlusal development. The purpose of this article was to review circumstances that can result in the loss of a permanent first molar-including dental caries, molar incisor hypomineralization, eruption disturbances of permanent teeth, and failure of restorative treatment to affirm that a complete dental arch is not necessary for the existence of a functional dental arch. The extraction of permanent first molar(s) with subsequent orthodontic treatment in a young patient can be considered a cost-effective alternative to placing complex restorations that require replacement over the lifespan. Approaches to establish a functional dental arch in the event of the loss of a permanent first molar(s) are outlined. Additionally, orthodontic diagnostic and treatment principles are reviewed. Case histories are provided to illustrate the clinical management of permanent first molar extractions to achieve a functional dental arch.

  20. Growth and treatment changes distal to the mandibular first molar: a lateral cephalometric study.

    PubMed

    Sable, Daniel L; Woods, Michael G

    2004-06-01

    This study examined space changes occurring distal to the mandibular first molar in growing patients treated using two different approaches. Two groups of 50 patients were selected for the study. The patients in group I were treated with the extraction of mandibular second premolars, whereas those in group II were treated without mandibular premolar extractions, by holding E-spaces with utility arches. Lateral cephalograms taken before and after treatment were used to measure space changes within the mandible. Follow-up written treatment records and radiographs were also examined to ascertain whether the mandibular third molars were ultimately extracted or retained. A greater mean space increase between Xi point and the mandibular first molar was found in boys and girls treated with second premolar extractions. The mean space increase between Xi point and the mandibular first molar, as well as the average increase in total mandibular length, was greater in boys than in girls for both treatment modalities. This reflects a greater amount of growth in boys during the treatment period. The greater mean space increase in the groups treated with second premolar extractions could be attributed to the fact that the first molar generally moved further mesially during treatment in the extraction subjects, whereas in the E-space subjects, the first molars were perhaps held back. It was noted that the mandibular third molars were ultimately more likely to have been extracted in the E-space groups than in the second premolar extraction groups within this sample.

  1. Preoperative removal of lower third molars and bilateral sagittal split osteotomy in the UK.

    PubMed

    Rice, Steven; Serrant, Paul; Laverick, Sean; McIntyre, Grant

    2016-06-01

    To find out what consultants in Oral and Maxillofacial Surgery (OMFS) in the UK think about complications of bilateral sagittal split osteotomy (BSSO) in relation to lower third molars we organised a national postal questionnaire during 2012-13. Of 378 consultants, 192 practised orthognathic surgery of whom 132 replied (a 69% response rate). Eighty-one respondents routinely removed lower third molars before BSSO; 51 did not. Eighty-nine respondents thought that there was an increased risk of complications if third molars were present at the time of BSSO, mainly an increased risk of unfavourable fractures. Forty-three respondents did not think there was an increased risk of complications of BSSO when third molars were present. Of the 81 who routinely removed the lower third molars, 13 removed them within the six-month period before BSSO, 56 removed them 6-12 months before, and 11 removed them more than 12 months before. There seemed to be no difference in self-reported unfavourable fracture rates between those surgeons who routinely removed lower third molars and those who did not. The results of the questionnaire showed that there was considerable variation in surgical practice across the UK in the management of lower third molars before BSSO, both in terms of whether or not to remove these teeth at all, and if so, when to remove them.

  2. National clinical guidelines for the extraction of first permanent molars in children.

    PubMed

    Cobourne, M T; Williams, A; Harrison, M

    2014-12-05

    This article summarises recently updated guidelines produced by the Clinical Governance Directorate of the British Orthodontic Society through the Clinical Standards Committee of the Faculty of Dental Surgery, Royal College of Surgeons of England (FDSRCS) on the extraction of first permanent molars in children. The first permanent molar is susceptible to chronological enamel defects, molar-incisor hypomineralisation and caries, which may necessitate enforced extraction in the developing dentition. In the right circumstances, the extraction of these teeth can be followed by successful eruption of the second permanent molar and ultimately, third molar eruption to complete the molar dentition. For this reason, elective extraction of first permanent molars with a questionable long-term prognosis should be considered when planning enforced extractions. However, a number of factors can influence the decision-making process, including the necessity for a general anaesthetic to allow extraction, potential cooperation with restorative or orthodontic treatment and likely future preventative practice within the family. Moreover, the presence of any underlying malocclusion also needs to be evaluated within the context of extraction planning. The current available evidence has been evaluated and awarded a grade based upon those recommended by the Scottish Intercollegiate Guidelines Network.

  3. Review of flap design influence on the health of the periodontium after mandibular third molar surgery.

    PubMed

    Karaca, Inci; Simşek, Sebnem; Uğar, Dilek; Bozkaya, Süleyman

    2007-07-01

    The purpose of this study is to review the effect of flap design in terms of periodontal status of the preceding second molar after lower third molar surgery. Impacted lower third molar surgery may result in periodontal complications on the distal surface of the adjacent second molar. Flap design that is used during impacted third molar surgery is important to prevent those complications. Several different flap techniques, mainly envelope, triangular (vertical) flaps, and their modifications have been developed to minimize those complications. Each technique has some advantages as well as disadvantages. It is also reported that the selection of a flap design does not seem to have a lasting effect on the health of periodontal tissue. The effect of the type of flap used for lower third molar surgery on the periodontal status of the second molar, as well as the factors that may influence this outcome, has been uncertain. The decision to use on one or the other of the flaps should be based on surgeon's preference.

  4. Morphometric variation of extant platyrrhine molars: taxonomic implications for fossil platyrrhines

    PubMed Central

    Nova Delgado, Mónica; Galbany, Jordi

    2016-01-01

    The phylogenetic position of many fossil platyrrhines with respect to extant ones is not yet clear. Two main hypotheses have been proposed: the layered or successive radiations hypothesis suggests that Patagonian fossils are Middle Miocene stem platyrrhines lacking modern descendants, whereas the long lineage hypothesis argues for an evolutionary continuity of all fossil platyrrhines with the extant ones. Our geometric morphometric analysis of a 15 landmark-based configuration of platyrrhines’ first and second lower molars suggest that morphological stasis may explain the reduced molar shape variation observed. Platyrrhine lower molar shape might be a primitive retention of the ancestral state affected by strong ecological constraints throughout the radiation of the main platyrrhine families. The Patagonian fossil specimens showed two distinct morphological patterns of lower molars, Callicebus—like and Saguinus—like, which might be the precursors of the extant forms, whereas the Middle Miocene specimens, though showing morphological resemblances with the Patagonian fossils, also displayed new, derived molar patterns, Alouatta—like and Pitheciinae—like, thereby suggesting that despite the overall morphological stasis of molars, phenotypic diversification of molar shape was already settled during the Middle Miocene. PMID:27190704

  5. Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars

    PubMed Central

    Abarca, J.; Zaror, C.; Monardes, H.; Hermosilla, V.; Muñoz, C.; Cantin, M.

    2015-01-01

    SUMMARY Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3–5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24–0.33 mm in maxillary first molars and between 0.25–0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully. PMID:25937698

  6. Morphology of the Physiological Apical Foramen in Maxillary and Mandibular First Molars.

    PubMed

    Abarca, J; Zaror, C; Monardes, H; Hermosilla, V; Muñoz, C; Cantin, M

    2014-06-01

    Information regarding the anatomy of the physiological apical foramen is limited. Knowing its diameter and shapes contributes to clinical work, specifically to the cleaning and shaping of the apical third. The aim of this ex vivo study was to determine the minimum and maximum diameters and shape of the physiological apical foramen in the roots of maxillary and mandibular first molars. A descriptive study was conducted on 89 recently extracted first molars. Roots 3-5 mm from the apex were sectioned and prepared for analysis at 40× magnification. The minimum and maximum diameters of each physiological foramen were measured using the program Motic Images plus 2.0 ML. The shape of the foramina, classified as round, oval or irregular, was determined by the difference between the maximum and minimum diameters. A total of 174 physiological foramina were analyzed. The average of the minimum and maximum diameters was between 0.24-0.33 mm in maxillary first molars and between 0.25-0.33 mm in mandibular first molars. In maxillary molars, the most common shape of the foramen was oval (50%), then irregular (32%), then round (18%). In mandibular molars, the oval shape was also the most frequent (59%), followed by irregular (23%) and round (18%). The findings of this study regarding the morphology of physiological apical foramina in first molars make it easier for the operator to choose the appropriately-sized instruments to perform endodontic therapy successfully.

  7. Enamel-dentine junction (EDJ) morphology distinguishes the lower molars of Australopithecus africanus and Paranthropus robustus.

    PubMed

    Skinner, Matthew M; Gunz, Philipp; Wood, Bernard A; Hublin, Jean-Jacques

    2008-12-01

    Tooth crown morphology plays a central role in hominin systematics, but the removal of the original outer enamel surface by dental attrition often eliminates from consideration the type of detailed crown morphology that has been shown to discriminate among hominin taxa. This reduces the size of samples available for study. The enamel-dentine junction (EDJ) is the developmental precursor and primary contributor to the morphology of the unworn outer enamel surface, and its morphology is only affected after considerable attrition. In this paper, we explore whether the form of the EDJ can be used to distinguish between the mandibular molars of two southern African fossil hominins: Paranthropus (or Australopithecus) robustus and Australopithecus africanus. After micro-computed tomographic scanning the molar sample, we made high-resolution images of the EDJ and used geometric morphometrics to compare EDJ shape differences between species, in addition to documenting metameric variation along the molar row within each species. Landmarks were collected along the marginal ridge that runs between adjacent dentine horns and around the circumference of the cervix. Our results suggest that the morphology of the EDJ can distinguish lower molars of these southern African hominins, and it can discriminate first, second, and third molars within each taxon. These results confirm previous findings that the EDJ preserves taxonomically valuable shape information in worn teeth. Mean differences in EDJ shape, in particular dentine horn height, crown height, and cervix shape, are more marked between adjacent molars within each taxon than for the same molar between the two taxa.

  8. Third molar surgery: the patient's and the clinician's perspective

    PubMed Central

    Jerjes, Waseem; Upile, Tahwinder; Kafas, Panagiotis; Abbas, Syedda; Rob, Jubli; McCarthy, Eileen; McCarthy, Peter; Hopper, Colin

    2009-01-01

    Background In this report, the problems of third molar surgery have been reviewed from the perspective of both patient and clinician; additionally an overall analysis of preoperative imaging investigations was carried out. Specifically, three main areas of interest were investigated: the prediction of surgical difficulty and potential complications; the assessment of stress and anxiety and finally the assessment of postoperative complications and the surgeon's experience. Findings In the first study, the prediction of surgical difficulty and potential injury to the inferior alveolar nerve was assessed. This was achieved by examining the patient's orthopantomograms and by using the Pederson Difficulty Index (PDI). Several radiological signs were identified and a classification tree was created to help predict the incidence of such event. In the second study, a prospective assessment addressing the patient's stress and anxiety pre-, intra- and postoperatively was employed. Midazolam was the active drug used against placebo. Objective and subjective parameters were assessed, including measuring the cortisol level in saliva. Midazolam was found to significantly reduce anxiety levels and salivary cortisol was identified as an accurate anxiety marker. In the third study, postoperative complications and the surgeon's experience were examined. Few patients in this study suffered permanent nerve dysfunction. Junior surgeons reported a higher complication rate particularly in trismus, alveolar osteitis, infection and paraesthesia over the distributions of the inferior alveolar and lingual nerves. In apparent contrast, senior surgeons reported higher incidence of postoperative bleeding. Discussion These studies if well employed can lead to favourable alteration in patient management and might have a positive impact on future healthcare service. PMID:19852848

  9. Vergence adaptation in subjects with convergence excess.

    PubMed

    Nilsson, Maria; Brautaset, Rune L

    2011-03-01

    The main purpose of this study was to evaluate the vergence adaptive ability in subjects diagnosed with convergence excess (CE) phoria (ie, subjects with an esophoric shift from distance to near but without an intermittent tropia at near). Vergence adaptation was measured at far and near with both base-in and base-out prisms using a "flashed" Maddox rod technique in 20 control subjects and 16 subjects with CE. In addition, accommodative adaptation and the stimulus AC/A and CA/C cross-links were measured. The AC/A and CA/C ratios were found to be high and low, respectively, and accommodative adaptation was found to be reduced in CE subjects as compared with the controls (P<0.005), all as predicted by the present theory. However, vergence adaptive ability was found to be reduced in the CE subjects at both distance and near and in response to both base-in and base-out prisms (P=0.002). This finding is not in accordance with and is difficult to reconcile with the present theory of CE.

  10. [Base excess. Parameter with exceptional clinical significance].

    PubMed

    Schaffartzik, W

    2007-05-01

    The base excess of blood (BE) plays an important role in the description of the acid-base status of a patient and is gaining in clinical interest. Apart from the Quick test, the age, the injury severity score and the Glasgow coma scale, the BE is becoming more and more important to identify, e. g. the risk of mortality for patients with multiple injuries. According to Zander the BE is calculated using the pH, pCO(2), haemoglobin concentration and the oxygen saturation of haemoglobin (sO(2)). The use of sO(2 )allows the blood gas analyser to determine only one value of BE, independent of the type of blood sample analyzed: arterial, mixed venous or venous. The BE and measurement of the lactate concentration (cLac) play an important role in diagnosing critically ill patients. In general, the change in BE corresponds to the change in cLac. If DeltaBE is smaller than DeltacLac the reason could be therapy with HCO(3)(-) but also with infusion solutions containing lactate. Physician are very familiar with the term BE, therefore, knowledge about an alkalizing or acidifying effect of an infusion solution would be very helpful in the treatment of patients, especially critically ill patients. Unfortunately, at present the description of an infusion solution with respect to BE has not yet been accepted by the manufacturers.

  11. Prevention and treatment of excessive dermal scarring.

    PubMed Central

    Roseborough, Ingrid E.; Grevious, Mark A.; Lee, Raphael C.

    2004-01-01

    Today, wound management to avoid excessive scar formation is increasingly important, especially in populations with Fitzpatrick 3 or higher skin pigmentation. Medical science and industrial development are devoting more effort toward understanding and offering better therapy to control scars. However, advances in scar management have been hampered by the confusing or ambiguous terminology. There is no consensus on what amount of post-traumatic skin scar formation is "normal" and what should be considered "hypertrophic". In the World Health Organization's ICD-9, there is no diagnostic code for hypertrophic scar--only keloid is listed. Yet, the medical and scientific literature distinguishes them as different conditions. Our experience suggests that the diagnosis of keloid disease is greatly over-rendered. For black patients, an elevated scar seems, by default, diagnosed as keloid by most. This confusion results in inappropriate management of scar formation, and occasionally contributes to decision making related to elective or cosmetic surgery. Given that patients are expecting better outcomes from wound care today than in the past, this review article attempts to capture the essential biological factors related to wound scar production and discusses treatment options and indications used by the authors. Images Figure 1 Figure 2 Figure 3 PMID:14746360

  12. Cool WISPs for stellar cooling excesses

    NASA Astrophysics Data System (ADS)

    Giannotti, Maurizio; Irastorza, Igor; Redondo, Javier; Ringwald, Andreas

    2016-05-01

    Several stellar systems (white dwarfs, red giants, horizontal branch stars and possibly the neutron star in the supernova remnant Cassiopeia A) show a mild preference for a non-standard cooling mechanism when compared with theoretical models. This exotic cooling could be provided by Weakly Interacting Slim Particles (WISPs), produced in the hot cores and abandoning the star unimpeded, contributing directly to the energy loss. Taken individually, these excesses do not show a strong statistical weight. However, if one mechanism could consistently explain several of them, the hint could be significant. We analyze the hints in terms of neutrino anomalous magnetic moments, minicharged particles, hidden photons and axion-like particles (ALPs). Among them, the ALP or a massless HP represent the best solution. Interestingly, the hinted ALP parameter space is accessible to the next generation proposed ALP searches, such as ALPS II and IAXO and the massless HP requires a multi TeV energy scale of new physics that might be accessible at the LHC.

  13. Excessive internet use and depressive disorders.

    PubMed

    Mihajlović, Goran; Hinić, Darko; Damjanović, Aleksandar; Gajić, Tomislav; Dukić-Dejanović, Slavica

    2008-03-01

    Recent studies of Internet influence on behavioural disorders of its users, have created quite a polarised ambience. On the one hand, there are those who believe that the Internet is a new better medium for enabling various patterns of communication and social relations. On the other hand, others maintain that Internet use can lead to social isolation and other forms of psychological disorders, for an example depression. The aim of this work is a review of research attempts to confirm a connection between increased Internet use and psychological disorders, in the first place, depression. The number of studies on this subject is not very great thus far. This is mainly because depression and similar disorders are serious distorsions in basic psychological processes; this suggests how difficult it may be to work with such examinees, and how complex it may appear to distinguish etiological factors. These facts do not lessen the importance of the aim itself, i.e. defining potential consequences of excessive Internet use when it comes to psychological wellbeing, since the Internet is expected to become a basic form of social interaction in the near future, and consequently one of the major factors of socialisation and constitution of one's psychological identity. Due to that fact, the aim of this work is to indicate methodological and conceptual flaws of the studies which have attempted to make a connection between mood disorders and the Internet, so as to establish the base for future studies of the psychological consequences of Internet development.

  14. "Excess Water" Following Deforestation by Beetle Kill?

    NASA Astrophysics Data System (ADS)

    Hyde, K.; Miller, S. N.; Anderson-Sprecher, R.; Ewers, B. E.; Speckman, H.

    2014-12-01

    Deforestation resulting from tree mortality by insects and disease may reduce transpiration demand and increase available water in mountain environments throughout. We tested this hypothesis using three large catchments (97-407 km2) located in the Snowy Mountains of Wyoming where hydrology is snowmelt dominated. An epidemic of spruce bark beetle and associated tree mortality emerged in 2006 and has since impacted 60 to 80% of basal area of the spruce-fir and mixed conifer forests. A 25-year continuous record (1998-2013) of daily snowfall, temperature, and stream discharge data between 1 April and 30 September of each year were available for each catchment. We used quantile regression and multivariate time series analysis first to control for the effects of temperature and snow water equivalent on the timing and magnitude of discharge and then to test for changes in discharge trends since 2006. We found no compelling evidence of changes in discharge trends associated with the onset of the beetle epidemic independent of snowmelt trends. Several factors could explain this apparent lack of "excess water" following tree mortality by insects and disease. Any increases in water may be scale dependent, a local phenomenon that does not transfer through large catchments. Other vegetation including young cohorts of affected tree species, shrubs, and herbaceous cover may respond robustly to the open canopy and utilize soil water previously consumed by the infected trees.

  15. The Neurometabolic Fingerprint of Excessive Alcohol Drinking

    PubMed Central

    Meinhardt, Marcus W; Sévin, Daniel C; Klee, Manuela L; Dieter, Sandra; Sauer, Uwe; Sommer, Wolfgang H

    2015-01-01

    ‘Omics' techniques are widely used to identify novel mechanisms underlying brain function and pathology. Here we applied a novel metabolomics approach to further ascertain the role of frontostriatal brain regions for the expression of addiction-like behaviors in rat models of alcoholism. Rats were made alcohol dependent via chronic intermittent alcohol vapor exposure. Following a 3-week abstinence period, rats had continuous access to alcohol in a two-bottle, free-choice paradigm for 7 weeks. Nontargeted flow injection time-of-flight mass spectrometry was used to assess global metabolic profiles of two cortical (prelimbic and infralimbic) and two striatal (accumbens core and shell) brain regions. Alcohol consumption produces pronounced global effects on neurometabolomic profiles leading to a clear separation of metabolic phenotypes between treatment groups, particularly. Further comparisons of regional tissue levels of various metabolites, most notably dopamine and Met-enkephalin, allow the extrapolation of alcohol consumption history. Finally, a high-drinking metabolic fingerprint was identified indicating a distinct alteration of central energy metabolism in the accumbens shell of excessively drinking rats that could indicate a so far unrecognized pathophysiological mechanism in alcohol addiction. In conclusion, global metabolic profiling from distinct brain regions by mass spectrometry identifies profiles reflective of an animal's drinking history and provides a versatile tool to further investigate pathophysiological mechanisms in alcohol dependence. PMID:25418809

  16. Excess-density-driven snakes in tokamaks

    NASA Astrophysics Data System (ADS)

    Aydemir, A. Y.; Shaing, K. C.; Waelbroeck, F. L.

    2011-10-01

    ``Snakes'' refer to sinusoidal patterns observed on space-time plots of soft-X-ray signals in tokamak plasmas. They are generally attributed to persistent and localized density perturbations that form at a rational surface after pellet injection (Weller, JET 1987), and Parker, Alcator-C 1987), or impurity accumulation (Naujoks, ASDEX 1996, Delgado-Aparicio, C-Mod 2011). It is not clear whether all snake observations have a unique origin. A likely explanation is that material trapped inside an island driven by a temperature hole leads to the observed soft-X-ray signals (Wesson 1995). More recently, it has been suggested that they could be the result of saturated nonlinear internal kinks in low, or reversed-shear geometries (Cooper 2011). We have started an examination of some of these issues using ideas from neoclassical transport theory (Shaing 2007) in conjunction with various magnetohydrodynamic models. In a RMHD model, we demonstrated that excess-density-driven bootstrap current can stabilize a resistive m = 1 island at a small amplitude, leaving a radially and poloidally localized snake-like structure. Extension of this work to more sophisticated models that include diamagnetic effects, and possibly more realistic geometries, will be presented. This research was supported by the Office of Fusion Energy Science of the U.S. Department of Energy.

  17. Gel injection successfully shuts off excess water

    SciTech Connect

    1995-11-01

    Unocal applied a high-temperature organic polymer gel in Feather field Well H-43 in the UK North Sea to reduce water production in them more-permeable upper perforated section of the Brent Sand. The operation and technical details of the polymer system developed by Unocal, and how it was applied, are described in paper SPE 30426, ``Water shut off in the North Sea; Testing a new polymer system in the Heather field, UKCS Block 2/5.`` The authors concluded that the new gel system successfully isolated the Upper Brent water production, increasing oil production and decreasing water production. Lower perforations were successfully isolated using sized calcium carbonate suspended in an HEC polymer--a technique difficult to monitor in the deviated well. Batch mixing provided ``excellent`` quality gel, closely matching lab measured performance. And the gel required no pre-cooling in the near-wellbore area. Some 1,100 bbl were injected without excessive wellhead pressure, at 1 bpm. A summary of the paper`s highlights is presented here.

  18. The neurometabolic fingerprint of excessive alcohol drinking.

    PubMed

    Meinhardt, Marcus W; Sévin, Daniel C; Klee, Manuela L; Dieter, Sandra; Sauer, Uwe; Sommer, Wolfgang H

    2015-03-13

    'Omics' techniques are widely used to identify novel mechanisms underlying brain function and pathology. Here we applied a novel metabolomics approach to further ascertain the role of frontostriatal brain regions for the expression of addiction-like behaviors in rat models of alcoholism. Rats were made alcohol dependent via chronic intermittent alcohol vapor exposure. Following a 3-week abstinence period, rats had continuous access to alcohol in a two-bottle, free-choice paradigm for 7 weeks. Nontargeted flow injection time-of-flight mass spectrometry was used to assess global metabolic profiles of two cortical (prelimbic and infralimbic) and two striatal (accumbens core and shell) brain regions. Alcohol consumption produces pronounced global effects on neurometabolomic profiles leading to a clear separation of metabolic phenotypes between treatment groups, particularly. Further comparisons of regional tissue levels of various metabolites, most notably dopamine and Met-enkephalin, allow the extrapolation of alcohol consumption history. Finally, a high-drinking metabolic fingerprint was identified indicating a distinct alteration of central energy metabolism in the accumbens shell of excessively drinking rats that could indicate a so far unrecognized pathophysiological mechanism in alcohol addiction. In conclusion, global metabolic profiling from distinct brain regions by mass spectrometry identifies profiles reflective of an animal's drinking history and provides a versatile tool to further investigate pathophysiological mechanisms in alcohol dependence.

  19. Convergence Insufficiency/Divergence Insufficiency Convergence Excess/Divergence Excess: Some Facts and Fictions.

    PubMed

    Khawam, Edward; Abiad, Bachir; Boughannam, Alaa; Saade, Joanna; Alameddine, Ramzi

    2015-01-01

    Great discrepancies are often encountered between the distance fixation and the near-fixation esodeviations and exodeviations. They are all attributed to either anomalies of the AC/A ratio or anomalies of the fusional convergence or divergence amplitudes. We report a case with pseudoconvergence insufficiency and another one with pseudoaccommodative convergence excess. In both cases, conv./div. excess and insufficiency were erroneously attributed to anomalies of the AC/A ratio or to anomalies of the fusional amplitudes. Our purpose is to show that numerous factors, other than anomalies in the AC/A ratio or anomalies in the fusional conv. or divergence amplitudes, can contaminate either the distance or the near deviations. This results in significant discrepancies between the distance and the near deviations despite a normal AC/A ratio and normal fusional amplitudes, leading to erroneous diagnoses and inappropriate treatment models.

  20. Di-photon excess at LHC and the gamma ray excess at the Galactic Centre

    SciTech Connect

    Hektor, Andi; Marzola, Luca

    2016-07-25

    Motivated by the recent indications for a 750 GeV resonance in the di-photon final state at the LHC, in this work we analyse the compatibility of the excess with the broad photon excess detected at the Galactic Centre. Intriguingly, by analysing the parameter space of an effective models where a 750 GeV pseudoscalar particles mediates the interaction between the Standard Model and a scalar dark sector, we prove the compatibility of the two signals. We show, however, that the LHC mono-jet searches and the Fermi LAT measurements strongly limit the viable parameter space. We comment on the possible impact of cosmic antiproton flux measurement by the AMS-02 experiment.

  1. Selection of instruments for the successful extraction of molar teeth: a pilot study.

    PubMed

    Babarinde, Bolaji Adebayo

    2009-01-01

    We report the result of a pilot study that was designed to test the effectiveness of a chart that gives advice about the choice of extraction instruments and the techniques necessary to remove molar teeth successfully. It was designed from experience gained from the extraction of several molar teeth under local anaesthesia, and includes 20 blocks that cover a combination of five clinical presentations of tooth decay with four clinical presentations of tooth mobility. Recent graduates who used the chart were able to extract more molar teeth successfully than those who did not, and its use can also reduce the amount of supervision time necessary without compromising the guidance required.

  2. Vital Pulp Therapy with Three Different Pulpotomy Agents in Immature Molars: A Case Report

    PubMed Central

    Harandi, Azadeh; Forghani, Maryam; Ghoddusi, Jamileh

    2013-01-01

    Introduction This case report describes apexogenesis treatment of three molar teeth of an 8-year-old boy using three different pulpotomy agents. Methods Pulpotomy was performed on decayed immature molar teeth with established irreversible pulpitis and the remaining pulp was capped with either zinc oxide eugenol, ProRoot mineral trioxide aggregate or calcium-enriched mixture (CEM) cement. Teeth were restored with stainless steel crowns. Results Eighteen months clinical and radiographic follow-up revealed successful preservation of pulpal vitality with continued root development in all treated teeth. Conclusion Based on this case report, CEM cement may be an alternative option for pulpotomy treatment of immature permanent molars. PMID:23922578

  3. Endodontic therapy of a mandibular third molar with 5 canals: a case report.

    PubMed

    Silberman, Adrian; Heilborn, Carlos; Cohenca, Nestor

    2009-06-01

    Endodontic treatment of third molars often becomes part of comprehensive treatment plans, as it represents a more conservative and less invasive approach than its therapeutic alternatives. The frequency of anatomic variations in mandibular molars, particularly root canal configuration, requires 2 periapical radiographs from different angles. Upon reading and interpretation of the radiographs, the clinician should consider the anatomy and level of difficulty of the endodontic procedure and refer the patient to an endodontist, if deemed necessary. The present article discusses the successful treatment and preservation of a mandibular third molar with 5 root canals, as well as methods for its clinical management.

  4. A New Orthodontic Appliance with a Mini Screw for Upper Molar Distalization

    PubMed Central

    2016-01-01

    The aim of this study is to present a new upper molar distalization appliance called Cise distalizer designed as intraoral device supported with orthodontic mini screw for upper permanent molar distalization. The new appliance consists of eight main components. In order to understand the optimum force level, the appliance under static loading is tested by using strain gage measurement techniques. Results show that one of the open coils produces approximately 300 gr distalization force. Cise distalizer can provide totally 600 gr distalization force. This range of force level is enough for distalization of upper first and second molar teeth. PMID:27528796

  5. Implication of zinc excess on soil health.

    PubMed

    Wyszkowska, Jadwiga; Boros-Lajszner, Edyta; Borowik, Agata; Baćmaga, Małgorzata; Kucharski, Jan; Tomkiel, Monika

    2016-01-01

    This study was undertaken to evaluate zinc's influence on the resistance of organotrophic bacteria, actinomyces, fungi, dehydrogenases, catalase and urease. The experiment was conducted in a greenhouse of the University of Warmia and Mazury (UWM) in Olsztyn, Poland. Plastic pots were filled with 3 kg of sandy loam with pHKCl - 7.0 each. The experimental variables were: zinc applied to soil at six doses: 100, 300, 600, 1,200, 2,400 and 4,800 mg of Zn(2+) kg(-1) in the form of ZnCl2 (zinc chloride), and species of plant: oat (Avena sativa L.) cv. Chwat and white mustard (Sinapis alba) cv. Rota. Soil without the addition of zinc served as the control. During the growing season, soil samples were subjected to microbiological analyses on experimental days 25 and 50 to determine the abundance of organotrophic bacteria, actinomyces and fungi, and the activity of dehydrogenases, catalase and urease, which provided a basis for determining the soil resistance index (RS). The physicochemical properties of soil were determined after harvest. The results of this study indicate that excessive concentrations of zinc have an adverse impact on microbial growth and the activity of soil enzymes. The resistance of organotrophic bacteria, actinomyces, fungi, dehydrogenases, catalase and urease decreased with an increase in the degree of soil contamination with zinc. Dehydrogenases were most sensitive and urease was least sensitive to soil contamination with zinc. Zinc also exerted an adverse influence on the physicochemical properties of soil and plant development. The growth of oat and white mustard plants was almost completely inhibited in response to the highest zinc doses of 2,400 and 4,800 mg Zn(2+) kg(-1).

  6. Dynamics of the G-excess illusion

    NASA Technical Reports Server (NTRS)

    Baylor, K. A.; Reschke, M.; Guedry, F. E.; Mcgrath, B. J.; Rupert, A. H.

    1992-01-01

    The G-excess illusion is increasingly recognized as a cause of aviation mishaps especially when pilots perform high-speed, steeply banked turns at low altitudes. Centrifuge studies of this illusion have examined the perception of subject orientation and/or target displacement during maintained hypergravity with the subject's head held stationary. The transient illusory perceptions produced by moving the head in hypergravity are difficult to study onboard centrifuges because the high angular velocity ensures the presence of strong Coriolis cross-coupled semicircular canal effects that mask immediate transient otolith-organ effects. The present study reports perceptions following head movements in hypergravity produced by high-speed aircraft maintaining a banked attitude with low angular velocity to minimize cross-coupled effects. Methods: Fourteen subjects flew on the NASA KC-135 and were exposed to resultant gravity forces of 1.3, 1.5, and 1.8 G for 3 minute periods. On command, seated subjects made controlled head movements in roll, pitch, and yaw at 30 second intervals both in the dark and with faint targets at a distance of 5 feet. Results: head movement produced transient perception of target displacement and velocity at levels as low as 1.3 G. Reports of target velocity without appropriate corresponding displacement were common. At 1.8 G when yaw head movements were made from a face down position, 4 subjects reported oscillatory rotational target displacement with fast and slow alternating components suggestive of torsional nystagmus. Head movements evoked symptoms of nausea in most subjects, with 2 subjects and 1 observer vomiting. Conclusions: The transient percepts present conflicting signals, which introduced confusion in target and subject orientation. Repeated head movements in hypergravity generate nausea by mechanisms distinct from cross-coupled Coriolis effects.

  7. Kinetic model of excess activated sludge thermohydrolysis.

    PubMed

    Imbierowicz, Mirosław; Chacuk, Andrzej

    2012-11-01

    Thermal hydrolysis of excess activated sludge suspensions was carried at temperatures ranging from 423 K to 523 K and under pressure 0.2-4.0 MPa. Changes of total organic carbon (TOC) concentration in a solid and liquid phase were measured during these studies. At the temperature 423 K, after 2 h of the process, TOC concentration in the reaction mixture decreased by 15-18% of the initial value. At 473 K total organic carbon removal from activated sludge suspension increased to 30%. It was also found that the solubilisation of particulate organic matter strongly depended on the process temperature. At 423 K the transfer of TOC from solid particles into liquid phase after 1 h of the process reached 25% of the initial value, however, at the temperature of 523 K the conversion degree of 'solid' TOC attained 50% just after 15 min of the process. In the article a lumped kinetic model of the process of activated sludge thermohydrolysis has been proposed. It was assumed that during heating of the activated sludge suspension to a temperature in the range of 423-523 K two parallel reactions occurred. One, connected with thermal destruction of activated sludge particles, caused solubilisation of organic carbon and an increase of dissolved organic carbon concentration in the liquid phase (hydrolysate). The parallel reaction led to a new kind of unsolvable solid phase, which was further decomposed into gaseous products (CO(2)). The collected experimental data were used to identify unknown parameters of the model, i.e. activation energies and pre-exponential factors of elementary reactions. The mathematical model of activated sludge thermohydrolysis appropriately describes the kinetics of reactions occurring in the studied system.

  8. Family-Based Genetic Association for Molar-Incisor Hypomineralization.

    PubMed

    Jeremias, Fabiano; Pierri, Ricardo A G; Souza, Juliana F; Fragelli, Camila Maria B; Restrepo, Manuel; Finoti, Livia S; Bussaneli, Diego G; Cordeiro, Rita C L; Secolin, Rodrigo; Maurer-Morelli, Claudia V; Scarel-Caminaga, Raquel M; Santos-Pinto, Lourdes

    2016-01-01

    Despite some evidence of genetic and environmental factors on molar-incisor hypomineralization (MIH), its aetiology remains unclear. This family-based genetic association study aimed more comprehensively to investigate the genetic carriage potentially involved in MIH development. DNA was obtained from buccal cells of 391 individuals who were birth family members of 101 Brazilian nuclear families. Sixty-three single nucleotide polymorphisms (SNPs) were investigated in 21 candidate genes related to amelogenesis using the TaqMan™ OpenArray™ Genotyping platform. All SNPs were genotyped in 165 birth family members unaffected by MIH, 96 with unknown MIH status and 130 affected individuals (50.7% with severe MIH). Association analysis was performed by the transmission/disequilibrium test (TDT), and statistical results were corrected using the false discovery rate. Significant results were obtained for SNPs rs7821494 (FAM83H gene, OR = 3.7; 95% CI = 1.75-7.78), rs34367704 (AMBN gene, OR = 2.7; 95% CI = 1.16-6.58), rs3789334 (BMP2 gene, OR = 2.9; 95% CI = 1.34-6.35), rs6099486 (BMP7 gene, OR = 2.2; 95% CI = 1.14-4.38), rs762642 (BMP4 gene, OR = 2.3; 95% CI = 1.38-3.65), rs7664896 (ENAM gene, OR = 2.1; 95% CI = 1.19-3.51), rs1711399 (MMP20 gene, OR = 0.4; 95% CI = 0.20-0.72), rs1711423 (MMP20 gene, OR = 2.1; 95% CI = 1.18-3.61), rs2278163 (DLX3 gene, OR = 2.8; 95% CI = 1.26-6.41), rs6996321 (FGFR1 gene, OR = 2.7; 95% CI = 1.20-5.88), and rs5979395 (AMELX gene, OR = 11.7; 95% CI = 1.63-84.74). Through this family-based association study, we concluded that variations in genes related to amelogenesis were associated with the susceptibility to develop MIH. This result is in agreement with the multifactorial idea of the MIH aetiology, but further studies are necessary to investigate more thoroughly the factors that could influence MIH.

  9. An Ex-vivo Shear and tensile bond strengths of orthodontic molar tubes bonded using different techniques

    PubMed Central

    Alwahadni, Ahed

    2017-01-01

    Background Molar bonding procedures need continuous improvement to be widely accepted clinically and eventually replace molar bands. Material and Methods The purpose of this study was to determine the effects of enamel micro-abrasion and silane coating of the base of molar tubes on shear and tensile bond strengths of orthodontic molar tubes. A total of 200 third molars were randomly allocated into five groups of 40 teeth as follows: group 1: molar tubes bonded to etched teeth (37% phosphoric acid gel; control group); group 2: molar tubes bonded to etched teeth (37% phosphoric acid) with the addition of silane to the base of molar tubes; group 3: molar tubes bonded to teeth pre-treated with 18% hydrochloric acid and pumice (micro-abrasion); group 4: molar tubes bonded to teeth pre-treated with microabrasion with the addition of silane to the base of molar tubes; group 5: molar tubes bonded to teeth pre-treated with microabrasion before conventional acid etching combined with the addition of silane to the base of molar tubes. The bond strength testing was performed using a computer control electromechanical universal testing machine. Results The highest mean shear and tensile bond strengths were recorded in group 5 (13.81±2.54MPa and 13.97±2.29 MPa, respectively). Micro-abrasion alone (group 3) and the combination of enamel micro-abrasion and the addition of silane (group 4) produced bond strength values comparable to the control. Conclusions Enamel surface pre-treatment (micro abrasion) before conventional acid etching combined with the addition of silane to the base of the molar tube produced the highest bond strengths among all tested groups. Key words:Molar, shear strength, tensile strength, orthodontic appliances. PMID:28298990

  10. Effects of ozone therapy on pain, swelling, and trismus following third molar surgery.

    PubMed

    Kazancioglu, H O; Kurklu, E; Ezirganli, S

    2014-05-01

    The aim of this study was to evaluate the efficacy of therapeutic ozone application in the management of pain, swelling, and trismus associated with the surgical removal of impacted mandibular third molars. Sixty consecutive patients with asymptomatic bilateral impacted mandibular third molars were recruited into the study. Randomly, by use of envelops, the molar on one side was extracted and ozone therapy was given (study side); the molar on the other side was extracted 2 weeks later and sham ozone therapy was given (negative control side). The mean age of the 60 patients was 22.6±2.3 years (range 18-25 years). No differences were found between the two sides for mouth opening or swelling. The degree of pain and the number of analgesic tablets taken was significantly lower for the study side. This study showed ozone therapy to have a positive effect on OHIP-14 questionnaire results.

  11. Management of Chronic Hyperplastic Pulpitis in Mandibular Molars of Middle Aged Adults- A Multidisciplinary Approach

    PubMed Central

    Lingeswaran, Somiya; Ari, Geetha; Thyagarajan, Ramakrishnan; Logaranjani, Anitha

    2016-01-01

    The molar tooth of children and young adults is a common site for chronic hyperplastic pulpitis (pulp polyp). It rarely occurs in middle aged adults. This condition is usually characterized by extensive involvement of the pulp, dictating the extraction of involved tooth. Extraction of permanent molars can lead to transient or permanent malocclusion, aesthetic, phonetic and functional problems. Here we report a case of pulp polyp in mandibular first molar of a 33-year-old woman that grew into the carious cavity. The aim of this case report is to describe the diagnosis of a chronic hyperplastic pulpitis involving the permanent molar as well as to describe its management in order to preserve them as a functional unit of the dentition. PMID:26894192

  12. How Many Digits Should We Use in Formula or Molar Mass Calculations?

    ERIC Educational Resources Information Center

    Svensson, Christer

    2004-01-01

    The calculations of uncertainties in the formula or molar masses of compounds are streamlined. Three rules of increasing complexity are proposed, which overestimate the uncertainty so there is little if any risk that the true values are missed.

  13. Identification of a nonsense mutation in the PAX9 gene in molar oligodontia.

    PubMed

    Nieminen, P; Arte, S; Tanner, D; Paulin, L; Alaluusua, S; Thesleff, I; Pirinen, S

    2001-10-01

    Development of dentition is controlled by numerous genes, as has been shown by experimental animal studies and mutations that have been identified by genetic studies in man. Here we report a nonsense mutation in the PAX9 gene that is associated with molar tooth agenesis in a Finnish family. The A340T transversion creates a stop codon at lysine 114, and truncates the coded PAX9 protein at the end of the DNA-binding paired-box. All the affected members of the family were heterozygous for the mutation. The tooth agenesis phenotype involves all permanent second and third molars and most of the first molars and resembles the earlier reported phenotype that was also associated with a PAX9 mutation. The phenotype is presumably a consequence of haploinsufficiency of PAX9. In another Finnish family with molar tooth agenesis, we could not find similar sequence changes in PAX9.

  14. Simplifying Chemical Reactor Design by using Molar Quantities Instead of Fractional Conversion.

    ERIC Educational Resources Information Center

    Brown, Lee F.; Falconer, John L.

    1987-01-01

    Explains the advantages of using molar quantities in chemical reactor design. Advocates the use of differential versions of reactor mass balances rather than the integrated forms. Provides specific examples and cases to illustrate the principles. (ML)

  15. Molar incisor hypomineralization: considerations about treatment in a controlled longitudinal case.

    PubMed

    de Oliveira, Daniela Cristina; Favretto, Carla Oliveira; Cunha, Robson Frederico

    2015-01-01

    Molar incisor hypomineralization (MIH) is a defect in the tooth enamel of systemic origin and may affect one or all four first permanent molars frequently associated with the permanent incisors. This case reports a 7-year-old child with severe MIH in the permanent molars associated with tooth decay and intense pain. In the first stage of treatment, therapy was performed with fluoride varnish and restoration with glass ionomer cement (GIC). After 6 years of clinical and radiographic follow-up, the restorations presented wear and fractures on the margins, indicating their replacement with composite resin. Severe cases of MIH in the early permanent molars can be treated with varnish and GIC to restore the patient's comfort and strengthen the hypomineralized dental structures. The clinical and radiographic monitoring frequently indicated when the restoration with composite resin should be performed.

  16. Root Canal Morphology of Mandibular First Permanent Molars in an Indian Population

    PubMed Central

    Chourasia, Hemant Ramesh; Meshram, Ganesh K.; Warhadpande, Manjusha; Dakshindas, Darshan

    2012-01-01

    An in vitro study was performed to determine the number of roots, root canals per tooth, root canal configurations, and frequency of isthmi and apical deltas in mandibular first permanent molars in an Indian population. Hundred and fifty mandibular first permanent molars were collected and subjected to clearing technique. The cleared teeth were examined in a stereomicroscope under 7.5x magnifications. The canal configurations were categorized using Vertucci's classification. Overall 94.6% of the mandibular first molars had two roots, and 5.3% had extradistal roots (distolingual root). In addition, 64% of the specimens had three root canals, and 36% had four root canals. The most common canal configurations of mesial and distal roots were Vertucci type IV (54%) and type I (65.3%), respectively. Clinician should be aware of the complex root canal morphology of mandibular first molars among the Indian population before and during the root canal treatment. PMID:22287965

  17. Phylogenetic and environmental components of morphological variation: skull, mandible, and molar shape in marmots (Marmota, Rodentia).

    PubMed

    Caumul, Radhekshmi; Polly, P David

    2005-11-01

    The phenotype is a product of its phylogenetic history and its recent adaptation to local environments, but the relative importance of the two factors is controversial. We assessed the effects of diet, habitat, elevation, temperature, precipitation, body size, and mtDNA genetic divergence on shape variation in skulls, mandibles, and molars, structures that differ in their genetic and functional control. We asked whether these structures have adapted to environment to the same extent and whether they retain the same amount of phylogenetic signal. We studied these traits in intra- and interspecific populations of Eurasian marmots whose last common ancestor lived 2-5 million years ago. Path Analysis revealed that body size explained 10% of variation in skulls, 7% in mandibles, and 15% in molars. Local vegetation explained 7% of variation in skulls, 11% in mandibles, and 12% in molars. Dietary category explained 25% of variation in skulls, 11% in mandibles, and 9% in molars. Cyt b mtDNA divergence (phylogeny) explained 15% of variation in skulls, 7% in mandibles, and 5% in molars. Despite the percentages of phylogenetic variance, maximum-likelihood trees based on molar and skull shape recovered most phylogenetic groupings correctly, but mandible shape did not. The good performance of molars and skulls was probably due to different factors. Skulls are genetically and functionally more complicated than teeth, and they had more mathematically independent components of variation (5-6-in skulls compared to 3-in molars). The high proportion of diet-related variance was not enough to mask the phylogenetic signal. Molars had fewer independent components, but they also have less ecophenotypic variation and evolve more slowly, giving each component a proportionally stronger phylogenetic signal. Molars require larger samples for each operational taxonomic unit than the other structures because the proportion of within-taxon to between-taxon variation was higher. Good phylogenetic

  18. The efficacy of locally applied morphine in post-operative pain after bilateral third molar surgery.

    PubMed

    Moore, U J; Seymour, R A; Gilroy, J; Rawlins, M D

    1994-03-01

    1. Recent evidence has hinted at a peripheral site of action of morphine analgesic efficacy. 2. Previous studies by the same authors have developed a model for testing local analgesic efficacy by placing drugs into tooth sockets after third molar surgery. 3. The present studies test the hypothesis of local morphine activity at two dosage concentrations, 100 ng ml-1 and 100 micrograms ml-1 after third molar surgery. 4. No significant analgesic efficacy was found at either dose when compared with placebo.

  19. Spectrophotometric color evaluation of permanent incisors, canines and molars. A cross-sectional clinical study

    PubMed Central

    POP-CIUTRILA, IOANA-SOFIA; COLOSI, HORATIU ALEXANDRU; DUDEA, DIANA; BADEA, MANDRA EUGENIA

    2015-01-01

    Background and aims An accurate color reproduction represents the final validation level of an esthetic anterior or posterior restoration. The aim of this study was to evaluate the color of permanent maxillary incisors, canines and molars, using a clinical spectrophotometer. Methods The Vita Easyshade Advance 4.0® intraoral spectrophotometer was used by one clinician to determine the color of 369 permanent maxillary incisors, canines and molars. The best matches to Vitapan Classical® and 3D-Master® shade guides were recorded. A one-way analysis of variance and Kruskal-Wallis test were used to compare L*, a*, b*, c* and h* color coordinates among the 3 types of teeth. Differences between the mean values of all color coordinates were evaluated by use of Bonferroni corrections. Color difference (ΔE*) between incisors, canines and molars was calculated from ΔL*, Δa* and Δb* data and the results were compared to ΔE*=3.3 acceptability threshold. Results Except for Δa* and Δh* between canines and molars, statistically significant differences among the mean differences of all color coordinates were found when the 3 types of teeth were compared by pairs. The most frequently measured shades were A1 (48.4%), respectively 1M1 (31.5%) for incisors, B3 (36.6%), respectively 2M3 (39.8%) for canines and B3 (44.7%), respectively 2M3 (52%) for molars. Incisors had the highest lightness values, followed by canines and molars. Molars were the most chromatic with the highest a* and b* values. Conclusions Despite the limitations of this study, color differences among incisors, canines and molars were found to be statistically significant, above the clinical acceptability threshold established. In conclusion, successful esthetic restorations of permanent teeth of the same patient need an individual color assessment and reproduction of every type of tooth. PMID:26733753

  20. Combined orthodontic and surgical therapy for a deeply impacted third molar related with a dentigerous cyst.

    PubMed

    Celebi, Nukhet; Canakci, Gulfesan Y; Sakin, Caglar; Kurt, Gokmen; Alkan, Alper

    2015-03-01

    The dentigerous cysts are the common cause that inhibits the eruption of the teeth. Large dentigerous cysts can cause pathological fractures in mandible. Temporary or permanent inferior alveolar and lingual nerve damage can occur associated with deeply impacted third molar surgery. We treated the dentigerous cyst arised from deeply impacted mandibular third molar with orthodontic extraction combined with the marsupialization therapy. This orthodontic-surgical procedure reduced the risk of nerve damage and pathological fracture of the mandible.

  1. A geometric morphometric analysis of hominin lower molars: Evolutionary implications and overview of postcanine dental variation.

    PubMed

    Gómez-Robles, Aida; Bermúdez de Castro, José María; Martinón-Torres, María; Prado-Simón, Leyre; Arsuaga, Juan Luis

    2015-05-01

    Lower molars have been extensively studied in the context of hominin evolution using classic and geometric morphometric analyses, 2D and 3D approaches, evaluations of the external (outer enamel surface) and internal anatomy (dentine, pulp chamber, and radicular canals), and studies of the crown and root variation. In this study, we present a 2D geometric morphometric analysis of the crown anatomy of lower first, second, and third molars of a broad sample of hominins, including Pliocene and Lower, Middle, and Upper Pleistocene species coming from Africa, Asia, and Europe. We show that shape variability increases from first to second and third molars. While first molars tend to retain a relatively stable 5-cusped conformation throughout the hominin fossil record, second and third molars show marked distal reductions in later Homo species. This trend to distal reduction is similar to that observed in previous studies of premolars and upper second and third molars, and points to a correlated reduction of distal areas across the whole postcanine dentition. Results on lower molar variation, as well as on other postcanine teeth, show certain trends in European Pleistocene populations from the Atapuerca sites. Middle Pleistocene hominins from Sima de los Huesos show Neanderthal affinities and strong dental reduction, especially in the most distal molars. The degree of dental reduction in this population is stronger than that observed in classic Neanderthals. Homo antecessor hominins from Gran Dolina-TD6 have primitive lower teeth that contrast with their more derived upper teeth. The evolutionary implications of these dental affinities are discussed in light of recent paleogenetic studies.

  2. Unilateral Maxillary First Molar Extraction in Class II Subdivision: An Unconventional Treatment Alternative

    PubMed Central

    Booij, J. W.; Livas, Christos

    2016-01-01

    The asymmetrical intra-arch relationship in Class II subdivision malocclusion poses challenges in the treatment planning and mechanotherapy of such cases. This case report demonstrates a treatment technique engaging unilateral extraction of a maxillary first molar and Begg fixed appliances. The outcome stability and the enhancing effect on the eruption of the third molar in the extraction segment were confirmed by a 4-year follow-up examination. PMID:27200194

  3. Evaluation of postoperative complications according to treatment of third molars in mandibular angle fracture

    PubMed Central

    2017-01-01

    Objectives The aim of this study was to evaluate the implication of third molars in postoperative complications of mandibular angle fracture with open reduction and internal fixation (ORIF). Materials and Methods Data were collected on patients who presented with mandibular angle fracture at our Department of Oral and Maxillofacial Surgery between January 2011 and December 2015. Of the 63 total patients who underwent ORIF and perioperative intermaxillary fixation (IMF) with an arch bar, 49 patients were identified as having third molars in the fracture line and were followed up with until plate removal. The complications of postoperative infection, postoperative nerve injury, bone healing, and changes in occlusion and temporomandibular joint were evaluated and analyzed using statistical methods. Results In total, 49 patients had third molars in the fracture line and underwent ORIF surgery and perioperative IMF with an arch bar. The third molar in the fracture line was retained during ORIF in 39 patients. Several patients complained of nerve injury, temporomandibular disorder (TMD), change of occlusion, and postoperative infection around the retained third molar. The third molars were removed during ORIF surgery in 10 patients. Some of these patients complained of nerve injury, but no other complications, such as TMD, change in occlusion, or postoperative infection, were observed. There was no delayed union or nonunion in either of the groups. No statistically significant difference was found between the non-extraction group and the retained teeth group regarding complications after ORIF. Conclusion If the third molar is partially impacted or completely nonfunctional, likely to be involved in pathologic conditions later in life, or possible to remove with the plate simultaneously, extraction of the third molar in the fracture line should be considered during ORIF surgery of the mandible angle fracture. PMID:28280708

  4. Class, type and position of 9148 surgically removed third molars in 3206 patients: A retrospective study

    PubMed Central

    Rocha-Navarro, Miriam L.; Acosta-Veloz, Anselmo L.; Juárez-Hernández, Angélica

    2012-01-01

    Objective: To investigate the class, type, position, diagnosis and most common procedures used in the surgical removal of third molars, and evaluate the sex and age distribution in a representative sample of Mexican patients. Study Design: A retrospective descriptive study was made covering the period 1993-2008 in relation to 9148 extracted third molars in 3206 patients treated in the Dental School of Salle Bajío University, A.C. (Mexico). Patients of either sex and aged 11-59 years, with at least one third molar programmed for surgical removal, were included in the study. A descriptive statistical study was made. Results: The mean patient age was 27.6 ± 10.6 years. There were 2093 females (65.3%) and 1111 males (34.6%). In relation to the 4025 upper molars, extraction was decided for prophylactic reasons in 3827 cases (95.08%). Type A presentations were recorded in 1929 cases (47.9%), with a vertical position in 1931 teeth (48%). In relation to the 5123 lower third molars, extraction was likewise most often indicated for prophylactic reasons (4424 cases, 86.36%). A total of 2353 teeth corresponded to type A (45.9%), 2545 were class I cases (49.7%), and a mesioangular position was observed in 1850 cases (36.1%). Conclusions: The present study shows that in Mexican patients, upper third molars most often correspond to type A and class I, with a vertical position, while lower third molars predominantly correspond to type A and class I, with a mesioangular position. This information can help dental surgeons take better decisions before and after surgery, to the benefit of their patients. Key words:Third molars, retrospective review, surgical removal. PMID:22143723

  5. Comparison of sexual dimorphism of permanent mandibular canine with mandibular first molar by odontometrics

    PubMed Central

    Agrawal, Aditi; Manjunatha, Bhari Shranesha; Dholia, Bhavik; Althomali, Yousef

    2015-01-01

    Background and Objectives: Sexual dimorphism is one of important tool of forensic science. The objective of this study is to assess the dimorphic status of mesio-distal (MD) and bucco-lingual (BL) diameter of mandibular canine with mandibular first molar among the students of dental college. This study is of definite significance as sex chromosomes and hormonal production influenced tooth morphology. Materials and Methods: The descriptive study adopted the purposive sampling technique, of 50 male and 50 female aged 17-25 years, using study casts for mesio-distal and bucco-lingual dimensions of mandibular canine with mandibular first molar were taken using digital Vernier caliper. The data obtained were subjected to statistical analysis using descriptive statistics and t-test to compare MD and BL dimensions in male and female populations and P ≤ 0.05 was found statistically significant. Results: Sexual dimorphism can be predicted by measuring mesiodistal dimension of mandibular canine and mandibular first molar. The left mandibular canine showed more sexual dimorphism (12.66%) in comparison to left mandibular first molar (0.824%) only. Right mandibular canine showed greater dimorphism in MD dimensions (10.94%) in comparison to right mandibular first molar (6.96%). In bucco-lingual dimensions mandibular canine showed less variability when compared with mandibular first molar, thus our study showed more significance on mesio-distal dimensions of both teeth. Conclusion: The present study concludes statistically significant sexual dimorphism in mandibular canine over mandibular first molar on study casts. The MD dimensions in mandibular canine and mandibular first molar can help in determining sex and identification of unknown person. PMID:26816466

  6. Is caffeine excess part of your differential diagnosis?

    PubMed

    Bridle, Leisa; Remick, June; Duffy, Evelyn

    2004-04-01

    The consumption of caffeine, and its effect on the human body, is a topic of ongoing debate. The average consumer may unwittingly consume excessive amounts of caffeine that may lead to adverse physiological side effects. Even the most astute clinician may miss caffeine-excess in the differential diagnosis. Therefore, a careful patient history, including a food and beverage diary, may be helpful in diagnosis of caffeine excess.

  7. Excess Weapons Plutonium Immobilization in Russia

    SciTech Connect

    Jardine, L.; Borisov, G.B.

    2000-04-15

    The joint goal of the Russian work is to establish a full-scale plutonium immobilization facility at a Russian industrial site by 2005. To achieve this requires that the necessary engineering and technical basis be developed in these Russian projects and the needed Russian approvals be obtained to conduct industrial-scale immobilization of plutonium-containing materials at a Russian industrial site by the 2005 date. This meeting and future work will provide the basis for joint decisions. Supporting R&D projects are being carried out at Russian Institutes that directly support the technical needs of Russian industrial sites to immobilize plutonium-containing materials. Special R&D on plutonium materials is also being carried out to support excess weapons disposition in Russia and the US, including nonproliferation studies of plutonium recovery from immobilization forms and accelerated radiation damage studies of the US-specified plutonium ceramic for immobilizing plutonium. This intriguing and extraordinary cooperation on certain aspects of the weapons plutonium problem is now progressing well and much work with plutonium has been completed in the past two years. Because much excellent and unique scientific and engineering technical work has now been completed in Russia in many aspects of plutonium immobilization, this meeting in St. Petersburg was both timely and necessary to summarize, review, and discuss these efforts among those who performed the actual work. The results of this meeting will help the US and Russia jointly define the future direction of the Russian plutonium immobilization program, and make it an even stronger and more integrated Russian program. The two objectives for the meeting were to: (1) Bring together the Russian organizations, experts, and managers performing the work into one place for four days to review and discuss their work with each other; and (2) Publish a meeting summary and a proceedings to compile reports of all the excellent

  8. Molar Absorptivity Measurements in Absorbing Solvents: Impact on Solvent Absorptivity Values.

    PubMed

    Bohman, Ariel; Arnold, Mark A

    2016-10-18

    Molar absorptivity is a fundamental molecular property that quantifies absorption strength as a function of wavelength. Absolute measurements of molar absorptivity demand accounting for all mechanisms of light attenuation, including reflective losses at interfaces associated with the sample. Ideally, such measurements are performed in nonabsorbing solvents and reflective losses can be determined in a straightforward manner from Fresnel equations or effectively accounted for by path length difference methods. At near-infrared wavelengths, however, many solvents, including water, are absorbing which complicates the quantification of reflective losses. Here, generalized equations are developed for calculating absolute molar absorptivities of neat liquids wherein the dependency of reflective loss on absorption properties of the liquid are considered explicitly. The resulting equations are used to characterize sensitivity of absolute molar absorptivity measurements for solvents to the absorption strength of the solvent as well as the path length of the measurement. Methods are derived from these equations to properly account for reflective losses in general and the effectiveness of these methods is demonstrated for absolute molar absorptivity measurements for water over the combination region (5000-4000 cm(-1)) of the near-infrared spectrum. Results indicate that ignoring solvent absorption effects can incorporate wide ranging systematic errors depending upon experimental conditions. As an example, systematic errors range from 0 to 10% for common conditions used in the measurement of absolute molar absorptivity of water over the combination region of the near-infrared spectrum.

  9. Early extraction: a silver bullet to avoid nerve injury in lower third molar removal?

    PubMed

    Zhang, Q-B; Zhang, Z-Q

    2012-10-01

    This retrospective study evaluated the effects of early extraction of immature lower third molar on preventing complications, particularly nerve injury following lower third molar removal. Patients were grouped according to age and radiographic results: group A (518 patients, ≤23 years, immature teeth with apical foramen not closed); group B (532 patients, >23 years, mature teeth with closed apical foramen). Group A included 230 males and 288 females (average age 17 years). In group A, 808 lower mandibular third molars were extracted bilaterally in 290 and unilaterally in 228 patients; the incidence of complications was 2.48% (20/808) (all were temporary), the incidence of nerve injury was 0%. Group B included 250 males and 282 females (average age 39 years). In group B, 810 lower third molars were extracted bilaterally in 278 and unilaterally in 254 patients; the incidence of complications was 10% (81/810), the incidence of nerve injury was 1.6% (13/810). All complications were temporary, except two removals of permanent inferior alveolar nerve numbness (>6 months). In this study, early removal of the lower third molar was effective in avoiding some postoperative complications, especially nerve injury. Early extraction of lower third molar in youngsters is recommended following a team consultation.

  10. The effect of extraction of third molars on late lower incisor crowding: a randomized controlled trial.

    PubMed

    Harradine, N W; Pearson, M H; Toth, B

    1998-05-01

    The problem of late mandibular incisor crowding is a well established phenomenon, the cause of which has been the substance of considerable debate over the years. A central issue is the possible role of the third molars though no definitive conclusions have been consistently drawn. This prospective study was designed to investigate the effects of randomly assigned early extraction of third molars on late crowding of the mandibular incisors. One-hundred-and-sixty-four patients entered the study from 1984 following completion of retention after orthodontic treatment. Seventy-seven patients (47%) returned for records up to a mean of 66 months later, and their start and finish study casts were digitized on a reflex microscope to determine Little's index of irregularity, intercanine width and arch length. Forty-four of the patients had been randomized to have third molars removed. There was no evidence of responder bias. Where third molars were extracted the mean increase in lower labial segment irregularity was reduced by 1.1 mm from a mean of 2.1 mm for the group where third molars were retained (P = 0.15, not statistically significant). This difference was also not considered to be clinically significant. The principal conclusion drawn from this randomized prospective study is that the removal of third molars to reduce or prevent late incisor crowding cannot be justified.

  11. Effect of orthodontic treatment involving first premolar extractions on mandibular third molar angulation and retromolar space

    PubMed Central

    Vaillard-Jiménez, Esther; García-Rocha, Araceli; Bellot-Arcís, Carlos; Paredes-Gallardo, Vanessa

    2017-01-01

    Background Third molars present more problems than other teeth because they are the last teeth to erupt, and so it is important to assess their development when designing an orthodontic treatment plan. The aim of this study was to compare the angulation of the mandibular third molar and retromolar space before and after orthodontic treatment in cases involving first premolar extraction. Material and Methods 76 patients, 59 women (77.63%) and 17 men (22.36%), were recruited from the Orthodontics Clinic at Benemérita Universidad Autónoma de Puebla (Mexico). Panoramic radiographs were analyzed before and after orthodontic treatment that included first premolar extractions, measuring retromolar space (RS) and the angles formed by the intersection of the axes of the third and second molar (α) and the intersection of the axis of the mandibular plane and third molar (β). Results The data obtained underwent statistical analysis. The angle α and β showed statistically significant differences on the left side in women. In men, only the right side α angle showed significant differences. Retromolar space increased significantly on both sides for both sexes. Conclusions Third molar angulation presents different behaviors between men and women, with greater verticalization in women. Key words:Third molar, retromolar space, orthodontics. PMID:28298970

  12. Prevalence of Third Molar Agenesis: Associated Dental Anomalies in Non-Syndromic 5923 Patients

    PubMed Central

    Sujon, Mamun Khan; Alam, Mohammad Khursheed; Rahman, Shaifulizan Abdul

    2016-01-01

    The aim of this study was to investigate the prevalence of third molar agenesis and other associated dental anomalies in Bangladeshi population and to investigate the relationship of other dental anomalies with the third molar presence/agenesis. A retrospective study was performed using panoramic radiographs of 5923 patients, who ranged in age from 10 to 50 years. All radiographs were analyzed by Planmeca Romexis® 3.0 software (Planmeca Oy, Helsinki, Finland). Pearson chi-square and one way ANOVA (Post Hoc) test were conducted. The prevalence of third molar agenesis was 38.4%. The frequency of third molar agenesis was significantly higher in females than males (p <0.025). Third molar agenesis was significantly more prevalent in maxilla as compared to mandible (p <0.007). The prevalence of other dental anomalies was 6.5%, among them hypodontia was 3.1%. Prevalence of third molar agenesis varies in different geographic region. Among the other dental anomalies hypodontia was more prevalent. PMID:27580050

  13. Revolution vs status quo? Non-intervention strategy of asymptomatic third molars causes harm.

    PubMed

    Toedtling, V; Yates, J M

    2015-07-10

    The Faculty of Dental Surgery of the Royal College of Surgeons of England has prompted the National Institute for Health and Care Excellence to urgently re-assess the TA1 guidance on extractions of wisdom teeth and highlighted required amendments to the present version in light of published evidence concerning the harm caused by wisdom tooth retention. This article seeks to address the recent concerns relating the increasing frequency of distal-cervical caries in lower second molar teeth when associated with asymptomatic partially erupted mesial or horizontal impacted mandibular third molars. Such acute angle impactions are classified as partially erupted when one of the third molar cusps breached the epithelial attachment of the distal aspect of the second molar, thus prevents the formation of a gingival seal. At its earliest stage the wisdom tooth appears clinically absent or unerupted, yet histologically the architecture of the gingival epithelium has been disrupted allowing ingress of microbes, demineralisation and succeeding cavitation to take place on the distal aspect of the second molar. We hope to highlight the difficulties faced in addressing this growing clinical problem and encourage clinicians to re-evaluate their own caries risk assessment and caries prevention strategy in relation to mesial and horizontal third molar extractions.

  14. Functional ecology and evolution of hominoid molar enamel thickness: Pan troglodytes schweinfurthii and Pongo pygmaeus wurmbii.

    PubMed

    Vogel, Erin R; van Woerden, Janneke T; Lucas, Peter W; Utami Atmoko, Sri S; van Schaik, Carel P; Dominy, Nathaniel J

    2008-07-01

    The divergent molar characteristics of Pan troglodytes and Pongo pygmaeus provide an instructive paradigm for examining the adaptive form-function relationship between molar enamel thickness and food hardness. Although both species exhibit a categorical preference for ripe fruit over other food objects, the thick enamel and crenulated occlusal surface of Pongo molar teeth predict a diet that is more resistant to deformation (hard) and fracture (tough) than the diet of Pan. We confirm these predictions with behavioral observations of Pan troglodytes schweinfurthii and Pongo pygmaeus wurmbii in the wild and describe the mechanical properties of foods utilized during periods when preferred foods are scarce. Such fallback foods may have exerted a selective pressure on tooth evolution, particularly molar enamel thinness, which is interpreted as a functional adaptation to seasonal folivory and a derived character trait within the hominoid clade. The thick enamel and crenulated occlusal surface of Pongo molars is interpreted as a functional adaptation to the routine consumption of relatively tough and hard foods. We discuss the implications of these interpretations for inferring the diet of hominin species, which possessed varying degrees of thick molar enamel. These data, which are among the first reported for hominoid primates, fill an important empirical void for evaluating the mechanical plausibility of putative hominin food objects.

  15. A reliable method for evaluating upper molar distalization: Superimposition of three-dimensional digital models

    PubMed Central

    Nalcaci, Ruhi; Bicakci, Ali Altug; Ozturk, Firat; Babacan, Hasan

    2015-01-01

    Objective The aim of this study was to evaluate the reliability of measurements obtained after the superimposition of three-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs and photocopies of plaster models for the evaluation of upper molar distalization. Methods Data were collected from plaster models and lateral cephalometric radiographs of 20 Class II patients whose maxillary first molars were distalized with an intraoral distalizer. The posterior movements of the maxillary first molars were evaluated using lateral cephalometric radiographs (group CP), photocopies of plaster models (group PH), and digitized 3D models (group TD). Additionally, distalization and expansion of the other teeth and the degrees of molar rotation were measured in group PH and group TD and compared between the two groups. Results No significant difference was observed regarding the amount of molar distalization among the three groups. A comparison of the aforementioned parameters between group PH and group TD did not reveal any significant difference. Conclusions 3D digital models are reliable to assess the results of upper molar distalization and can be considered a valid alternative to conventional measurement methods. PMID:25798414

  16. Molar-incisor hypomineralisation: prevalence and defect characteristics in Iraqi children.

    PubMed

    Ghanim, Aghareed; Morgan, Michael; Mariño, Rodrigo; Bailey, Denise; Manton, David

    2011-11-01

    BACKGROUND.  Little prevalence data relating to molar incisor hypomineralisation (MIH) exist for Middle East populations. AIM.  To evaluate the prevalence and the clinical features of MIH in school-aged children residing in Mosul City, Iraq. DESIGN.  A cluster sample of 823 7- to 9-year-old children had their first permanent molars and incisors (index teeth) evaluated using the European Academy of Paediatric Dentistry (EAPD) criteria for MIH. The examinations were conducted at schools by a calibrated examiner. RESULTS.  Of the children examined, 177 (21.5%) had hypomineralisation defects in at least one index tooth, 153 (18.6%) had at least one affected first molar or first molars and incisors and were considered as having MIH. The most commonly affected teeth were maxillary molars. Demarcated creamy white opacities were the most frequent lesion type. Dental restorations and tooth extraction because of MIH were uncommon. Children with three or more affected teeth were 3.7 times more likely to have enamel breakdown when compared with those children having only one or two affected teeth. CONCLUSIONS.  Molar incisor hypomineralisation was common amongst Iraqi children. Demarcated opacities were more prevalent than breakdown. The severity of the lesions increased with the number of affected teeth. The more severe the defect, the greater the involved tooth surface area.

  17. Recommendations for Third Molar Removal: A Practice-Based Cohort Study

    PubMed Central

    Rothen, Marilynn; Spiekerman, Charles; Drangsholt, Mark; McClellan, Lyle; Huang, Greg J.

    2014-01-01

    Objectives. We investigated general dentists’ reasons for recommending removal or retention of third molars and whether patients adhered to dentists’ recommendations. Methods. In a 2-year prospective cohort study (2009–2011) in the Pacific Northwest, we followed 801 patients aged 16 to 22 years from 50 general dental practices. Generalized estimating equations logistic regressions related patient and dentist characteristics to dentists' recommendations to remove third molars and to patient adherence. Results. General dentists recommended removal of 1683 third molars from 469 (59%) participants, mainly to prevent future problems (79%) or because a third molar had an unfavorable orientation or was unlikely to erupt (57%). Dentists recommended retention and monitoring of 1244 third molars from 366 (46%) participants, because it was too early to decide (73%), eruption path was favorable (39%), or space for eruption was sufficient (26%). When dentists recommended removal, 55% of participants adhered to this recommendation during follow-up, and the main reason was availability of insurance (88%). Conclusions. General dentists frequently recommended removal of third molars for reasons not related to symptoms or pathology, but rather to prevent future problems. PMID:24524519

  18. Root resorption of primary molars without successor teeth. An experimental study in the beagle dog.

    PubMed

    Lin, Bi-Chen; Zhao, Yu-Ming; Yang, Jie; Ge, Li-Hong

    2012-04-01

    Tooth agenesis is a common craniofacial congenital malformation in humans, but little is known about the mechanisms of root resorption in this condition. The purpose of this study was to investigate the mechanisms of root resorption in primary molars without successors. An animal model without permanent tooth germs was established by surgery in beagles. The times of onset of primary molar root resorption, with and without successors, were compared. The distribution of immune cells, odontoclasts, and their activating factors were determined by histochemistry and immunohistochemistry. Root resorption of primary mandibular molars without successors began later than physiological resorption. In primary molars without permanent germs, odontoclasts and immune cells were present mainly in the apical pulp at the start of root resorption, whereas in control teeth receptor activator of nuclear factor-κB ligand (RANKL)-positive cells were found mainly in the region of the periodontal ligament. CD14(+) and CD3(+) cells were found in both the pulp and the periodontal ligament region. These results suggest that the dental pulp of primary molars, as well as immune cells, may play an important role in root resorption in primary molars without permanent tooth germs.

  19. Sharp mandibular bone irregularities after lower third molar extraction: Incidence, clinical features and risk factors

    PubMed Central

    Alves-Pereira, Daniela; Valmaseda-Castellón, Eduard; Laskin, Daniel M.; Berini-Aytés, Leonardo; Gay-Escoda, Cosme

    2013-01-01

    Objectives: The purpose of this study was to determine the incidence and clinical symptoms associated with sharp mandibular bone irregularities (SMBI) after lower third molar extraction and to identify possible risk factors for this complication. Study Design: A mixed study design was used. A retrospective cohort study of 1432 lower third molar extractions was done to determine the incidence of SMBI and a retrospective case-control study was done to determine potential demographic and etiologic factors by comparing those patients with postoperative SMBI with controls. Results: Twelve SMBI were found (0.84%). Age was the most important risk factor for this complication. The operated side and the presence of an associated radiolucent image were also significantly related to the development of mandibular bone irregularities. The depth of impaction of the tooth might also be an important factor since erupted or nearly erupted third molars were more frequent in the SMBI group. Conclusions: SMBI are a rare postoperative complication after lower third molar removal. Older patients having left side lower third molars removed are more likely to develop this problem. The treatment should be the removal of the irregularity when the patient is symptomatic. Key words:Third molar, postoperative complication, bone irregularities, age. PMID:23524429

  20. Prevalence of Extra Roots in Permanent Mandibular First Molars in Iranian Population: A CBCT Analysis

    PubMed Central

    Rahimi, Saeed; Mokhtari, Hadi; Ranjkesh, Bahram; Johari, Masoomeh; Frough Reyhani, Mohammad; Shahi, Shahriar; Seif Reyhani, Sina

    2017-01-01

    Introduction: Having knowledge about the anatomy of root canal system is essential for success of endodontic treatment. The present study used cone-beam computed tomography (CBCT), to evaluate the prevalence of third root in mandibular first molars in a selected Iranian population. Methods and Materials: A total of 386 CBCT images from subjects referred to oral and maxillofacial radiology department of dental faculty of Tabriz University of Medical Sciences from 2011 to 2013 were selected and evaluated for this study and the cases with well-developed permanent mandibular first molars were included. The 3D images were reconstructed in axial cross sections and evaluated by two endodontists for the presence of the third extra lingual (radix entomolaris) or buccal (radix paramolaris) root. The chi-squared test was used to evaluate the relationship between gender and bilateral incidence of extra roots in mandibular first molars. Results: The distribution of three-rooted mandibular first molars with an additional root was 3%, (3.53% in female and 2.50% in male patients). There was no significant relationship between gender and bilateral occurrence of three-rooted mandibular first molars. Conclusion: The occurrence of three-rooted mandibular first molars in Iranian population is not uncommon which should be taken into consideration by the dental practitioners during root canal treatment of these teeth. PMID:28179928

  1. Distribution of soil arsenic species, lead and arsenic bound to humic acid molar mass fractions in a contaminated apple orchard.

    PubMed

    Newton, Kimberly; Amarasiriwardena, Dulasiri; Xing, Baoshan

    2006-09-01

    Excessive application of lead arsenate pesticides in apple orchards during the early 1900s has led to the accumulation of lead and arsenic in these soils. Lead and arsenic bound to soil humic acids (HA) and soil arsenic species in a western Massachusetts apple orchard was investigated. The metal-humate binding profiles of Pb and As were analyzed with size exclusion chromatography-inductively coupled plasma mass spectrometry (SEC-ICP-MS). It was observed that both Pb and As bind "tightly" to soil HA molar mass fractions. The surface soils of the apple orchard contained a ratio of about 14:1 of water soluble As (V) to As (III), while mono-methyl (MMA) and di-methyl arsenic (DMA) were not detectable. The control soil contained comparatively very low levels of As (III) and As (V). The analysis of soil core samples demonstrated that As (III) and As (V) species are confined to the top 20 cm of the soil.

  2. Assessment of home-based processing methods to reduce the phytate content and phytate/zinc molar ratio of white maize (Zea mays).

    PubMed

    Hotz, C; Gibson, R S

    2001-02-01

    Various methods of processing maize suitable for household use in rural Malawi, Central Africa, were investigated for their ability to reduce its phytate content and phytate/zinc molar ratio. These methods included fermentation, germination, and soaking. Penta- and hexainositol phosphates were measured by HPLC, and zinc was measured by atomic absorption spectrophotometry. Natural lactic fermentation of maize flour slurries resulted in 88% phytate retention compared to unprocessed, unrefined maize flour porridges, whereas lower phytate retention was observed when a starter culture (61%) or germinated flour (71%) was also used. Fermentation of cooked maize flour porridges with germinated flour added resulted in 54-85% retention of phytate compared to controls. Soaking maize flour or pounded maize and decanting excess water resulted in 43 and 49% retention of phytate, respectively. The latter soaking procedures were simple and effective and were suitable for household use in rural Malawian communities.

  3. Apparent molar volumes of aqueous calcium chloride to 250{degrees}C, 400 bars, and from molalities of 0.242 to 6.150

    SciTech Connect

    Oakes, C.S.; Bodnar, R.J.; Simonson, J.M.

    1995-09-01

    Relative densities of CaCl{sub 2}(aq) with 0.242 {le} m/(mol-kg{sup {minus}1}) {le} 6.150 were measured with vibrating-tube densimeters between 25 and 250{degrees}C and near 70 and 400 bars. Apparent molar volumes V{sub {null}} calculated from the measured density differences were represented with the Pitzer ion-interaction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V{sub {null}}{sup o}, and the second and third virial coefficients B{sup v} and C{sup v}, were necessary to represent V{sub {null}} near the estimated experimental uncertainty. The ionic-strength dependent {Beta}{sup 1}{sup v} term in the B{sup v} coefficient was included in the fit. The representation for V{sub {null}} has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln {gamma}{plus_minus}(CaCl{sub 2}), increases by a maximum of 0.3 at 400 bars, 250{degrees}C, and 6 mol-kg{sup {minus}1} as compared with its value at saturation pressure.

  4. Studies of excess electrons in sodium chloride clusters and of excess protons in water clusters

    SciTech Connect

    Barnett, R.N.; Cheng, H.P.; Hakkinen, H.; Landman, U.

    1995-05-11

    Electronic structure calculations using the local density functional method with nonlocal norm-conserving pseudopotentials, ab-initio molecular dynamics simulations, and a novel method of all-quantum simulations, combining a quantum path-integral description of the nuclear degrees of freedom with concurrent electronic structure calculations of the Born-Oppenheimer potential energy surface, were employed in investigations of the structure and dynamics of sodium chloride and protonated water clusters. The Na{sub 14}Cl{sub 9} (or Na{sub 14}Cl{sub 9}{sup +}) cluster exhibits a face (surface) segregated metallic Na{sub 5} (Na{sub 5}{sup +}) over-layer, the stability of which is demonstrated by a molecular dynamics simulation at 660 K. In analogy with color centers in bulk ionic crystals, the excess electrons in the halogen-deficient clusters in the various metallization sequences occupy energy levels which are split from the bottom of the unoccupied `conduction band` of the corresponding stoichiometric parent. Analysis of the electronic spatial distributions and participation ratios indicates that the excess electrons are of a more delocalized nature in comparison with the electrons occupying the p-like `valence band`. 133 refs., 28 figs., 12 tabs.

  5. A behavioral intervention to reduce excessive gestational weight gain

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Excessive gestational weight gain (GWG) is a key modifiable risk factor for negative maternal and child health. We examined the efficacy of a behavioral intervention in preventing excessive GWG. 230 participants (87.8% Caucasian, mean age= 29.1 years; second parity) completed the 36 week gestational...

  6. 7 CFR 1744.67 - Temporary excess construction funds.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Temporary excess construction funds. 1744.67 Section... Advance and Disbursement of Funds § 1744.67 Temporary excess construction funds. (a) When unanticipated events delay the borrower's disbursement of advanced funds, the funds may be used as follows: (1)...

  7. 26 CFR 1.162-8 - Treatment of excessive compensation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 2 2011-04-01 2011-04-01 false Treatment of excessive compensation. 1.162-8...-8 Treatment of excessive compensation. The income tax liability of the recipient in respect of an amount ostensibly paid to him as compensation, but not allowed to be deducted as such by the payor,...

  8. 26 CFR 1.162-8 - Treatment of excessive compensation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Treatment of excessive compensation. 1.162-8...-8 Treatment of excessive compensation. The income tax liability of the recipient in respect of an amount ostensibly paid to him as compensation, but not allowed to be deducted as such by the payor,...

  9. 40 CFR 76.13 - Compliance and excess emissions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Compliance and excess emissions. 76.13 Section 76.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.13 Compliance and excess...

  10. 40 CFR 76.13 - Compliance and excess emissions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Compliance and excess emissions. 76.13 Section 76.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.13 Compliance and excess...

  11. 40 CFR 76.13 - Compliance and excess emissions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Compliance and excess emissions. 76.13 Section 76.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.13 Compliance and excess...

  12. 40 CFR 76.13 - Compliance and excess emissions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Compliance and excess emissions. 76.13 Section 76.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.13 Compliance and excess...

  13. 40 CFR 76.13 - Compliance and excess emissions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Compliance and excess emissions. 76.13 Section 76.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES EMISSION REDUCTION PROGRAM § 76.13 Compliance and excess...

  14. The Role of Alcohol Advertising in Excessive and Hazardous Drinking.

    ERIC Educational Resources Information Center

    Atkin, Charles K.; And Others

    1983-01-01

    Examined the influence of advertising on excessive and dangerous drinking in a survey of 1,200 adolescents and young adults who were shown advertisements depicting excessive consumption themes. Results indicated that advertising stimulates consumption levels, which leads to heavy drinking and drinking in dangerous situations. (JAC)

  15. 12 CFR 740.3 - Advertising of excess insurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Advertising of excess insurance. 740.3 Section... ACCURACY OF ADVERTISING AND NOTICE OF INSURED STATUS § 740.3 Advertising of excess insurance. Any advertising that mentions share or savings account insurance provided by a party other than the NCUA...

  16. 12 CFR 740.3 - Advertising of excess insurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Advertising of excess insurance. 740.3 Section... ACCURACY OF ADVERTISING AND NOTICE OF INSURED STATUS § 740.3 Advertising of excess insurance. Any advertising that mentions share or savings account insurance provided by a party other than the NCUA...

  17. 12 CFR 740.3 - Advertising of excess insurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Advertising of excess insurance. 740.3 Section... ACCURACY OF ADVERTISING AND NOTICE OF INSURED STATUS § 740.3 Advertising of excess insurance. Any advertising that mentions share or savings account insurance provided by a party other than the NCUA...

  18. 12 CFR 740.3 - Advertising of excess insurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Advertising of excess insurance. 740.3 Section... ACCURACY OF ADVERTISING AND NOTICE OF INSURED STATUS § 740.3 Advertising of excess insurance. Any advertising that mentions share or savings account insurance provided by a party other than the NCUA...

  19. 12 CFR 740.3 - Advertising of excess insurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 7 2014-01-01 2014-01-01 false Advertising of excess insurance. 740.3 Section... ACCURACY OF ADVERTISING AND NOTICE OF INSURED STATUS § 740.3 Advertising of excess insurance. Any advertising that mentions share or savings account insurance provided by a party other than the NCUA...

  20. Excess attenuation of an acoustic beam by turbulence.

    PubMed

    Pan, Naixian

    2003-12-01

    A theory based on the concept of a spatial sinusoidal diffraction grating is presented for the estimation of the excess attenuation in an acoustic beam. The equation of the excess attenuation coefficient shows that the excess attenuation of acoustic beam not only depends on the turbulence but also depends on the application parameters such as the beam width, the beam orientation and whether for forward propagation or back scatter propagation. Analysis shows that the excess attenuation appears to have a frequency dependence of cube-root. The expression for the excess attenuation coefficient has been used in the estimations of the temperature structure coefficient, C(T)2, in sodar sounding. The correction of C(T)2 values for excess attenuation reduces their errors greatly. Published profiles of temperature structure coefficient and the velocity structure coefficient in convective conditions are used to test our theory, which is compared with the theory by Brown and Clifford. The excess attenuation due to scattering from turbulence and atmospheric absorption are both taken into account in sodar data processing for deducing the contribution of the lower atmosphere to seeing, which is the sharpness of a telescope image determined by the degree of turbulence in the Earth's atmosphere. The comparison between the contributions of the lowest 300-m layer to seeing with that of the whole atmosphere supports the reasonableness of our estimation of excess attenuation.