Science.gov

Sample records for 5-6 km thick

  1. Changes in single skinfold thickness in 100 km ultramarathoners

    PubMed Central

    Knechtle, Beat; Baumgartner, Sabrina; Knechtle, Patrizia; Rüst, Christoph Alexander; Rosemann, Thomas; Bescós, Raúl

    2012-01-01

    Background Changes in single skinfold thickness and body fat have been investigated in ultraswimmers and ultracyclists, but not in ultrarunners. The present study investigated the changes in single skinfold thickness during a 100 km ultramarathon. Methods Firstly, we investigated associations between prerace preparation and prerace body composition and, secondly, changes in single skinfold thickness during a 100 km ultramarathon in 219 male ultramarathoners. Changes in fat mass and skeletal muscle were estimated using anthropometric methods. Results Kilometers run weekly prerace and running speed during training were negatively associated with all skinfold thicknesses (P < 0.05) except for the front thigh skinfold. During the race, skinfold thickness at the pectoral (−0.1%), suprailiac (−1.8%), and calf (−0.8%) sites decreased (P < 0.05). The subjects lost 1.9 ± 1.4 kg of body mass (P < 0.001), 0.7 ± 1.0 kg of estimated skeletal muscle mass (P < 0.001), and 0.2 ± 1.3 kg of estimated fat mass (P < 0.05). The decrease in body mass was positively related to the decrease in both estimated skeletal muscle mass (r = 0.21, P = 0.0017) and estimated fat mass (r = 0.41, P < 0.0001). Conclusion Firstly, prerace fat mass and prerace skinfold thickness were associated with both volume and speed in running training. Secondly, during the ultramarathon, skinfold thickness decreased at the pectoral, suprailiac, and calf sites, but not at the thigh site. Percent decreases in skinfold thickness for ultrarunners was lower than the percent decreases in skinfold thickness reported for ultraswimmers and ultracyclists. PMID:24198597

  2. Three-dimensional structure and origin of a 1.8 km thick ice dome within Korolev Crater, Mars

    NASA Astrophysics Data System (ADS)

    Brothers, T. Charles; Holt, John W.

    2016-02-01

    Korolev is an 80 km diameter impact crater located at 72.7°N, 164.5°E containing a large domed deposit. Perennial water ice is thought to be currently unstable there; however, using a 3-D analysis of the dome's internal radar stratigraphy, we estimate that Korolev's central mound contains between 1400 and 3500 km3 of water ice that is up to 1.8 km thick. Furthermore, the stratigraphic structure of this ice dome is strikingly similar to the north polar layered deposits (NPLD) on Planum Boreum, approximately 600 km to the north. Additionally, our stratigraphic analysis suggests that Korolev ice was not previously part of a once larger polar ice sheet but rather it was deposited locally. We conclude that Korolev Crater's ice likely deposited during the same climate regime as Planum Boreum's NPLD, but independently. This implies that the incorporation of circumpolar ice deposits such as Korolev may prove useful in reconstructing a unique Mars polar climate history.

  3. 4 CFR 5.6 - Allowances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Allowances. 5.6 Section 5.6 Accounts GOVERNMENT ACCOUNTABILITY OFFICE PERSONNEL SYSTEM COMPENSATION § 5.6 Allowances. The provisions of chapter 59 of title 5, U.S. Code and the implementing regulations for the Executive Branch apply to Government...

  4. 1 CFR 5.6 - Daily publication.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 1 General Provisions 1 2013-01-01 2012-01-01 true Daily publication. 5.6 Section 5.6 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.6 Daily publication. There shall be an edition of the Federal Register published for each official Federal working day....

  5. 1 CFR 5.6 - Daily publication.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 1 General Provisions 1 2012-01-01 2012-01-01 false Daily publication. 5.6 Section 5.6 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.6 Daily publication. There shall be an edition of the Federal Register published for each official Federal working day....

  6. 1 CFR 5.6 - Daily publication.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 1 General Provisions 1 2014-01-01 2012-01-01 true Daily publication. 5.6 Section 5.6 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.6 Daily publication. There shall be an edition of the Federal Register published for each official Federal working day....

  7. 1 CFR 5.6 - Daily publication.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 1 General Provisions 1 2011-01-01 2011-01-01 false Daily publication. 5.6 Section 5.6 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.6 Daily publication. There shall be an edition of the Federal Register published for each official Federal working day....

  8. 1 CFR 5.6 - Daily publication.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Daily publication. 5.6 Section 5.6 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.6 Daily publication. There shall be an edition of the Federal Register published for each official Federal working day....

  9. 43 CFR 1610.5-6 - Revision.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Revision. 1610.5-6 Section 1610.5-6 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR GENERAL MANAGEMENT (1000) PLANNING, PROGRAMMING, BUDGETING Resource...

  10. 36 CFR 5.6 - Commercial vehicles.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Commercial vehicles. 5.6... COMMERCIAL AND PRIVATE OPERATIONS § 5.6 Commercial vehicles. (a) The term “Commercial vehicle” as used in... used in connection with any business. (b) The use of government roads within park areas by...

  11. 11 CFR 5.6 - Fees.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CFR 5.6(a) include, but are not limited to, the following: Advisory Opinion Index Report on Financial... ELECTION COMMISSION ACCESS TO PUBLIC DISCLOSURE DIVISION DOCUMENTS § 5.6 Fees. (a)(1) Fees will be charged... Time/Photocopying Time Clerical: First 1/2 hour is free; remaining time costs $4.50 per each half...

  12. 11 CFR 5.6 - Fees.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CFR 5.6(a) include, but are not limited to, the following: Advisory Opinion Index Report on Financial... ELECTION COMMISSION ACCESS TO PUBLIC DISCLOSURE DIVISION DOCUMENTS § 5.6 Fees. (a)(1) Fees will be charged... Time/Photocopying Time Clerical: First 1/2 hour is free; remaining time costs $4.50 per each half...

  13. 36 CFR 5.6 - Commercial vehicles.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Commercial vehicles. 5.6... COMMERCIAL AND PRIVATE OPERATIONS § 5.6 Commercial vehicles. (a) The term “Commercial vehicle” as used in... other vehicles when used in transporting movable property for a fee or profit, either as a direct...

  14. 36 CFR 5.6 - Commercial vehicles.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Commercial vehicles. 5.6... COMMERCIAL AND PRIVATE OPERATIONS § 5.6 Commercial vehicles. (a) The term “Commercial vehicle” as used in... other vehicles when used in transporting movable property for a fee or profit, either as a direct...

  15. 41 CFR 51-5.6 - Shipping.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Shipping. 51-5.6 Section 51-5.6 Public Contracts and Property Management Other Provisions Relating to Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 5-CONTRACTING REQUIREMENTS §...

  16. New synthesis of 5,6-benzindole

    SciTech Connect

    Shagalov, L.B.; Ostapchuk, G.M.; Ivanova, T.M.; Suvorov, N.N.

    1987-12-01

    A method has been developed for the synthesis of linear 5,6-benzindole by reduction of N-acetyl-5,6-benzindoxy with NaBH/sub 4/ and subsequent hydrolysis of the N-acetyl group. The PMR spectra were obtained on a Varian H-100 spectrometer in solutions of acetone-d/sub 6/ and chloroform-d/sub 3/ with TMA as internal standard. IR spectra were recorded on a Perkin-Elmer 180 spectrometer in KBr disks or in chloroform solutions in standard cells. TLC was conducted on Silufol UV-254 plates, with chloroform as eluent.

  17. 44 CFR 5.6 - Congressional information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Congressional information. 5... HOMELAND SECURITY GENERAL PRODUCTION OR DISCLOSURE OF INFORMATION General Provisions § 5.6 Congressional information. Nothing in this part authorizes withholding information from the Congress except when...

  18. 11 CFR 5.6 - Fees.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CFR 5.6(a) include, but are not limited to, the following: Advisory Opinion Index Report on Financial... ID numbers. Requests for more than 20 ID numbers will cost $.05 for each ID number requested. E Index (Parts 1-4)—Candidate Index of Supporting Documents—No charge for requests of 20 or fewer candidate...

  19. 44 CFR 5.6 - Congressional information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Congressional information. 5... HOMELAND SECURITY GENERAL PRODUCTION OR DISCLOSURE OF INFORMATION General Provisions § 5.6 Congressional information. Nothing in this part authorizes withholding information from the Congress except when...

  20. 11 CFR 5.6 - Fees.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CFR 5.6(a) include, but are not limited to, the following: Advisory Opinion Index Report on Financial... ID numbers. Requests for more than 20 ID numbers will cost $.05 for each ID number requested. E Index (Parts 1-4)—Candidate Index of Supporting Documents—No charge for requests of 20 or fewer candidate...

  1. 11 CFR 5.6 - Fees.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CFR 5.6(a) include, but are not limited to, the following: Advisory Opinion Index Report on Financial... ID numbers. Requests for more than 20 ID numbers will cost $.05 for each ID number requested. E Index (Parts 1-4)—Candidate Index of Supporting Documents—No charge for requests of 20 or fewer candidate...

  2. 6 CFR 5.6 - Responses to requests.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 6 Domestic Security 1 2014-01-01 2014-01-01 false Responses to requests. 5.6 Section 5.6 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY DISCLOSURE OF RECORDS AND INFORMATION Freedom of Information Act § 5.6 Responses to requests. (a) Acknowledgements of requests. On receipt of a request, a component ordinarily...

  3. KM3NeT

    NASA Astrophysics Data System (ADS)

    de Jong, M.

    2015-07-01

    KM3NeT is a large research infrastructure, that will consist of a network of deep-sea neutrino telescopes in the Mediterranean Sea. The main objective of KM3NeT is the discovery and subsequent observation of high-energy neutrino sources in the Universe. A further physics perspective is the measurement of the mass hierarchy of neutrinos. A corresponding study, ORCA, is ongoing within KM3NeT. A cost effective technology for (very) large water Cherenkov detectors has been developed based on a new generation of low price 3-inch photo-multiplier tubes. Following the successful deployment and operation of two prototypes, the construction of the KM3NeT research infrastructure has started. The prospects of the different phases of the implementation of KM3NeT are summarised.

  4. KM3NeT

    SciTech Connect

    Jong, M. de; Collaboration: KM3NeT Collaboration

    2015-07-15

    KM3NeT is a large research infrastructure, that will consist of a network of deep-sea neutrino telescopes in the Mediterranean Sea. The main objective of KM3NeT is the discovery and subsequent observation of high-energy neutrino sources in the Universe. A further physics perspective is the measurement of the mass hierarchy of neutrinos. A corresponding study, ORCA, is ongoing within KM3NeT. A cost effective technology for (very) large water Cherenkov detectors has been developed based on a new generation of low price 3-inch photo-multiplier tubes. Following the successful deployment and operation of two prototypes, the construction of the KM3NeT research infrastructure has started. The prospects of the different phases of the implementation of KM3NeT are summarised.

  5. Imaging Resolution of the 410-km and 660-km Discontinuities

    NASA Astrophysics Data System (ADS)

    Deng, K.; Zhou, Y.

    2014-12-01

    Structure of seismic discontinuities at depths of about 410 km and 660 km provides important constraints on mantle convection as the associated phase transformations in the transition zone are sensitive to thermal perturbations. Teleseismic P-to-S receiver functions have been widely used to map the depths of the two discontinuities. In this study, we investigate the resolution of receiver functions in imaging topographic variations of the 410-km and 660-km discontinuities based on wave propagation simulations using the Spectral Element Method (SEM). We investigate finite-frequency effects of direct P waves as well as P-to-S converted waves by varying the length scale of discontinuity topography in the transition zone. We show that wavefront healing effects are significant in broadband receiver functions. For example, at a period of 10 to 20 seconds, the arrival anomaly in P-to-S converted waves is about 50% of what predicted by ray theory when the topography length scale is in the order of 400 km. The observed arrival anomaly further reduces to 10-20% when the topography length scale reduces to about 200 km. We calculate 2-D boundary sensitivity kernels for direct P waves as well as receiver functions based on surface wave mode summation and confirm that finite frequency-effects can be properly accounted for. Three-dimensional wavespeed structure beneath seismic stations can also introduce significant artifacts in transition zone discontinuity topography if time corrections are not applied, and, the effects are dependent on frequency.

  6. Knob manager (KM) operators guide

    SciTech Connect

    1993-10-08

    KM, Knob Manager, is a tool which enables the user to use the SUNDIALS knob box to adjust the settings of the control system. The followings are some features of KM: dynamic knob assignments with the user friendly interface; user-defined gain for individual knob; graphical displays for operating range and status of each process variable is assigned; backup and restore one or multiple process variable; save current settings to a file and recall the settings from that file in future.

  7. On the contribution of stereochemistry to human ITPK1 specificity: Ins(1,4,5,6)P4 is not a physiologic substrate.

    PubMed

    Riley, Andrew M; Deleu, Sandrine; Qian, Xun; Mitchell, Jennifer; Chung, Sung-Kee; Adelt, Stephan; Vogel, Günter; Potter, Barry V L; Shears, Stephen B

    2006-01-01

    Ins(1,4,5,6)P4, a biologically active cell constituent, was recently advocated as a substrate of human Ins(3,4,5,6)P4 1-kinase (hITPK1), because stereochemical factors were believed relatively unimportant to specificity [Miller, G.J., Wilson, M.P., Majerus, P.W. and Hurley, J.H. (2005) Specificity determinants in inositol polyphosphate synthesis: crystal structure of inositol 1,3,4-triphosphate 5/6-kinase. Mol. Cell. 18, 201-212]. Contrarily, we provide three examples of hITPK1 stereospecificity. hITPK1 phosphorylates only the 1-hydroxyl of both Ins(3,5,6)P3 and the meso-compound, Ins(4,5,6)P3. Moreover, hITPK1 has >13,000-fold preference for Ins(3,4,5,6)P4 over its enantiomer, Ins(1,4,5,6)P4. The biological significance of hITPK1 being stereospecific, and not physiologically phosphorylating Ins(1,4,5,6)P4, is reinforced by our demonstrating that Ins(1,4,5,6)P4 is phosphorylated (K(m) = 0.18 microM) by inositolphosphate-multikinase. PMID:16376887

  8. The fifth spectrum of platinum (Pt V): Analysis of the (5d6 + 5d5 6 s) - 5d5 6 p transition array

    NASA Astrophysics Data System (ADS)

    Azarov, Vladimir I.; Gayasov, Robert R.

    2016-03-01

    The spectrum of platinum was observed in the 300-2100 Å wavelength region. The (5d6 + 5d5 6 s) - 5d5 6 p transition array of four times ionized platinum, Pt V, has been investigated and 1659 spectral lines have been classified in the region of 460-1730 Å. The analysis has led to the determination of the 5d6, 5d5 6 s and 5d5 6 p configurations. Thirty two of 34 theoretically possible 5d6 levels, 45 of 74 possible 5d5 6 s levels and 181 of 214 possible 5d5 6 p levels have been established. The orthogonal operators technique was used to calculate the level structure and transition probabilities. The energy parameters have been determined by the least squares fit to the observed levels. Calculated transition probability and energy values, as well as LS-compositions obtained from the fitted parameters are presented.

  9. Whipple bumper shield tests at over 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. ); Hill, S.A. . George C. Marshall Space Flight Center)

    1991-01-01

    A series of experiments has been performed on the the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a thin Whipple bumper shield at impact velocities up to 10.5 km/s by orbital space debris. Upon impact by an 0.67gm (0.87 mm thick) flier plate the thin aluminum bumper shield completely disintegrates into a debris cloud. The debris cloud front propagates axially at velocities in excess of 14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris cloud penetrates the substructure completely. 8 refs., 4 figs.

  10. 7 CFR 5.6 - Revision of the parity price of a commodity.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 1 2013-01-01 2013-01-01 false Revision of the parity price of a commodity. 5.6 Section 5.6 Agriculture Office of the Secretary of Agriculture DETERMINATION OF PARITY PRICES § 5.6 Revision of the parity price of a commodity. (a) Initiation of hearings. The “modernized” parity...

  11. 7 CFR 5.6 - Revision of the parity price of a commodity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 1 2011-01-01 2011-01-01 false Revision of the parity price of a commodity. 5.6 Section 5.6 Agriculture Office of the Secretary of Agriculture DETERMINATION OF PARITY PRICES § 5.6 Revision of the parity price of a commodity. (a) Initiation of hearings. The “modernized” parity...

  12. 7 CFR 5.6 - Revision of the parity price of a commodity.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false Revision of the parity price of a commodity. 5.6 Section 5.6 Agriculture Office of the Secretary of Agriculture DETERMINATION OF PARITY PRICES § 5.6 Revision of the parity price of a commodity. (a) Initiation of hearings. The “modernized” parity...

  13. 7 CFR 5.6 - Revision of the parity price of a commodity.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Revision of the parity price of a commodity. 5.6 Section 5.6 Agriculture Office of the Secretary of Agriculture DETERMINATION OF PARITY PRICES § 5.6 Revision of the parity price of a commodity. (a) Initiation of hearings. The “modernized” parity...

  14. 7 CFR 5.6 - Revision of the parity price of a commodity.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 1 2012-01-01 2012-01-01 false Revision of the parity price of a commodity. 5.6 Section 5.6 Agriculture Office of the Secretary of Agriculture DETERMINATION OF PARITY PRICES § 5.6 Revision of the parity price of a commodity. (a) Initiation of hearings. The “modernized” parity...

  15. Comparing earthquake models for the Corinth rift for Mw>=5.5/6/6.5 (Greece)

    NASA Astrophysics Data System (ADS)

    Boiselet, Aurélien; Scotti, Oona; Lyon-Caen, Hélène; Ford, Mary; Meyer, NIcolas; Bernard, Pascal

    2013-04-01

    The Corinth rift (Greece) is identified as a site of major importance for earthquake studies in Europe, producing one of the highest seismic activity and strain in the Euro-Mediterranean region. It is characterized by an asymmetrical structure, with the most active normal faults dipping north and a north-south extension rate measured by GPS increasing from 0.6 mm/year in the eastern part of the rift to 15 mm/year in the western part. Frequent seismic swarms and destructive earthquakes are observed in this area. The Corinth rift Laboratory (CRL, http://crlab.eu) european project investigates fault mechanics, its relationship with earthquakes, fluid flow and the related hazards in the western part of the rift, covering an area about 50 km by 40 km, between the city of Patras to the west and the city of Aigion to the east. As part of this project, within the CRL-SISCOR group, we construct earthquake forecast models (EFM) for M>=5.5/6/6.5 events of the Corinth rift area based on the in-depth seismotectonic studies available for this region. We first present the methodology used to construct the earthquake and fault databases and to quantify the associated uncertainties. We then propose EFM following two approaches: one based on the definition of seimotectonic areas with similar geologic or strain characteristics, the second one based on the definition of fault sources mapped at the surface as well as blind ones. In order to compute the probability of occurrence for M>=5.5/6/6.5 for seismotectonic areas, we analyse two earthquake catalogues available for Greece (National Observatory of Athens, Thessaloniki), apply two declustering methods (Reasenberg and Gardner) to construct a Poissonian earthquake catalogue and test the influence of the minimal magnitude (3.5; 4.0). We compare the impact of maximum magnitude and corner magnitude (Kagan 1997, 2002) estimations. We then apply the Weichert method to estimate the probability of occurrence of M>=5.5/6/6.5 based on

  16. Thick Toenails

    MedlinePlus

    ... be seen in individuals with nail fungus (onychomycosis), psoriasis, and hypothyroidism. Those who have problems with the thickness of their toenails should consult a foot and ankle surgeon for proper diagnosis and treatment. and or or and or or, browse by ...

  17. The discovery of novel 5,6,5- and 5,5,6-tricyclic pyrrolidines as potent and selective DPP-4 inhibitors.

    PubMed

    Cox, Jason M; Chu, Hong D; Kuethe, Jeffrey T; Gao, Ying-Duo; Scapin, Giovanna; Eiermann, George; He, Huaibing; Li, Xiaohua; Lyons, Kathryn A; Metzger, Joseph; Petrov, Aleksandr; Wu, Joseph K; Xu, Shiyao; Sinha-Roy, Ranabir; Weber, Ann E; Biftu, Tesfaye

    2016-06-01

    Novel potent and selective 5,6,5- and 5,5,6-tricyclic pyrrolidine dipeptidyl peptidase IV (DPP-4) inhibitors were identified. Structure-activity relationship (SAR) efforts focused on improving the intrinsic DPP-4 inhibition potency, increasing protease selectivity, and demonstrating clean ion channel and cytochrome P450 profiles while trying to achieve a pharmacokinetic profile suitable for once weekly dosing in humans. PMID:27106708

  18. The 2012 MW5.6 earthquake in the vicinity of the city of Sofia

    NASA Astrophysics Data System (ADS)

    Simeonova, Stela; Solakov, Dimcho; Aleksandrova, Irena; Dimitrova, Liliya; Popova, Iliana; Raykova, Plamena

    2013-04-01

    The territory of Bulgaria represents a typical example of high seismic risk area in the eastern part of the Balkan Peninsula. The neotectonic movements on the Balkan Peninsula were controlled by extensional collapse of the Late Alpin orogen, and were influenced by extension behind the Aegean arc and by the complicated vertical and horizontal movements in the Pannonian region. The city of Sofia is the capital of Bulgaria. It is situated in the centre of the Sofia seismic zone that is the most populated (more than 1.2 mil. inhabitants), industrial and cultural region of Bulgaria that faces considerable earthquake risk. Seismicity in the zone is related mainly to the marginal neotectonic faults of Sofia graben. The available historical documents prove the occurrence of destructive earthquakes during the 15th-18th centuries in the Sofia zone. In 19th century the city of Sofia has experienced two strong earthquakes: the 1818 earthquake with epicentral intensity I0=8-9 MSK and the 1858 earthquake with I0=IX-X MSK64. The 1858 earthquake caused heavy destruction in the town of Sofia and the appearance of thermal springs in the western part of the town. After a quiescence of about 50 years a strong event with M=6.5 occurred in 1905 near the western marginal part of the Sofia zone. During the 20th century the strongest event occurred in the vicinity of the city of Sofia is the 1917 earthquake with MS=5.3 (I0=7-8 MSK64). The earthquake caused a lot of damages in the town and changed the capacity of the thermal mineral springs in Sofia and the surrounding villages. The earthquake was felt in an area of 50000 km2 and followed by aftershocks, which lasted more than one year. Almost a century later (95 years) an earthquake of moment magnitude 5.6 hit Sofia seismic zone, on May 22nd, 2012, at 25 km south west of the city of Sofia. This shallow earthquake was largely felt in the region and up to Greece, FYROM, Serbia and Romania. No severe injuries have been reported so far, though

  19. The Effects of the Parenting Styles on Social Skills of Children Aged 5-6

    ERIC Educational Resources Information Center

    Kol, Suat

    2016-01-01

    The purpose of this study is to determine the effects of the parenting styles on social skills of children aged 5-6. The problem sentence of the research is; Do the parenting styles' have any effects on social skills of children aged 5-6?. The sub-problems of the research are in the form as; Does the social skills of children aged 5-6 differs from…

  20. Detection of the structure near the 410 km and 660 km discontinuities in Japan subduction zone from the waveform triplication

    NASA Astrophysics Data System (ADS)

    Cui, H.; Zhou, Y.

    2015-12-01

    Slab subduction plays an important role in the mantle material circulation [Stern, 2002], and can also affect the feature of the 410 km and 660 km seismic discontinuities (410 and 660) [Lebedev et al., 2002]. Japan subduction zone is a natural laboratory for studying the mantle composition and velocity structure associated with the deep subduction of the Pacific plate. In this study, triplicated waveforms of an intermediate-depth earthquake at the Hokkaido of Japan (2011/10/21, 08:02:37.62, 142.5315°E, 43.8729°N, Mb6.0, relocated depth: 188 km) are retrieved from the dense Chinese Digital Seismic Network (CDSN). P and S waveforms are filtered with the band of 0.05-1.0 Hz and 0.02-0.5 Hz, respectively, and then integrated into the displacement data. The relative traveltime and synthetic waveform fitting is applied to mapping the deep structure. The best fitting models are obtained through the trial and error tests. We find a 15 km uplift of the 410 and a 25 km depression of the 660, indicating the cold environment caused by the subduction slab; both the 410 and 660 show the sharp discontinuity, but a smaller velocity contrast than the IASP91 model [Kennett and Engdahl, 1991]. Atop the 410 and 660, there are high-velocity layers associated with the subduction (or stagnant) slab. We also find a low-velocity anomaly with the thickness of ~65 km below the 660, which may relate to the slab dehydration or the hot upwelling at the top of the lower mantle. The seismic velocity ratio (VP/VS) shows a lower zone at the depth of ~210-395 km, showing the consistency with the low Poisson's ratio signature of the oceanic plate; a higher zone at the depth of ~560-685 km, implying the hydrous mantle transition zone.

  1. 43 CFR 3585.5-6 - Publication and posting of notice.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Publication and posting of notice. 3585.5-6 Section 3585.5-6 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) SPECIAL LEASING AREAS...

  2. The Effect of Science Activities on Concept Acquisition of Age 5-6 Children Groups

    ERIC Educational Resources Information Center

    Dogru, Mustafa; Seker, Fatih

    2012-01-01

    Present research aims to determine the effect of science activities on concept development of preschool period age 5-6 children groups. Parallel to research objective, qualitative research pattern has been the selected method. Study group comprises of collectively 48 children from 5-6 age group attending to a private education institution in city…

  3. IMMUNOASSAY METHODS FOR MEASURING ATRAZINE AND 3,5,6-TRICHLORO-2-PYRIDINOL IN FOODS

    EPA Science Inventory

    This chapter describes the use of enzyme-linked immunosorbent assay (ELISA) methods for the analysis of two potential environmental contaminants in food sample media, atrazine and 3,5,6-trichloro-2-pyridinol (3,5,6-TCP). Two different immunoassay formats are employed: a magnetic...

  4. The KM3NeT Digital Optical Module

    NASA Astrophysics Data System (ADS)

    Vivolo, Daniele

    2016-04-01

    KM3NeT is a European deep-sea multidisciplinary research infrastructure in the Mediterranean Sea. It will host a km3-scale neutrino telescope and dedicated instruments for long-term and continuous measurements for Earth and Sea sciences. The KM3NeT neutrino telescope is a 3-dimensional array of Digital Optical Modules, suspended in the sea by means of vertical string structures, called Detection Units, supported by two pre-stretched Dyneema ropes, anchored to the seabed and kept taut with a system of buoys. The Digital Optical Module represents the active part of the neutrino telescope. It is composed by a 17-inch, 14 mm thick borosilicate glass (Vitrovex) spheric vessel housing 31 photomultiplier tubes with 3-inch photocathode diameter and the associated front-end and readout electronics. The technical solution adopted for the KM3NeT optical modules is characterized by an innovative design, considering that existing neutrino telescopes, Baikal, IceCube and ANTARES, all use large photomultipliers, typically with a diameter of 8″ or 10″. It offers several advantages: higher sensitive surface (1260 cm2), weaker sensitivity to Earth's magnetic field, better distinction between single-photon and multi-photon events (photon counting) and directional information with an almost isotropic field of view. In this contribution the design and the performance of the KM3NeT Digital Optical Modules are discussed, with a particular focus on enabling technologies and integration procedure.

  5. Inositol 1,3,4,5,6-Pentakisphosphate 2-Kinase from Maize: Molecular and Biochemical Characterization[OA

    PubMed Central

    Sun, Yuejin; Thompson, Mark; Lin, Gaofeng; Butler, Holly; Gao, Zhifang; Thornburgh, Scott; Yau, Kerrm; Smith, Doug A.; Shukla, Vipula K.

    2007-01-01

    Inositol 1,3,4,5,6-pentakisphosphate 2-kinase, an enzyme encoded by the gene IPK1, catalyzes the terminal step in the phytic acid biosynthetic pathway. We report here the isolation and characterization of IPK1 cDNA and genomic clones from maize (Zea mays). DNA Southern-blot analysis revealed that ZmIPK1 in the maize genome constitutes a small gene family with two members. Two nearly identical ZmIPK1 paralogs, designated as ZmIPK1A and ZmIPK1B, were identified. The transcripts of ZmIPK1A were detected in various maize tissues, including leaves, silks, immature ears, seeds at 12 d after pollination, midstage endosperm, and maturing embryos. However, the transcripts of ZmIPK1B were exclusively detected in roots. A variety of alternative splicing products of ZmIPK1A were discovered in maize leaves and seeds. These products are derived from alternative acceptor sites, alternative donor sites, and retained introns in the transcripts. Consequently, up to 50% of the ZmIPK1A transcripts in maize seeds and leaves have an interrupted open reading frame. In contrast, only one type of splicing product of ZmIPK1B was detected in roots. When expressed in Escherichia coli and subsequently purified, the ZmIPK1 enzyme catalyzes the conversion of myo-inositol 1,3,4,5,6-pentakisphosphate to phytic acid. In addition, it is also capable of catalyzing the phosphorylation of myo-inositol 1,4,6-trisphosphate, myo-inositol 1,4,5,6-tetrakisphosphate, and myo-inositol 3,4,5,6-tetrakisphosphate. Nuclear magnetic resonance spectroscopy analysis indicates that the phosphorylation product of myo-inositol 1,4,6-trisphosphate is inositol 1,2,4,6-tetrakisphosphate. Kinetic studies showed that the Km for ZmIPK1 using myo-inositol 1,3,4,5,6-pentakisphosphate as a substrate is 119 μm with a Vmax at 625 nmol/min/mg. These data describing the tissue-specific accumulation and alternative splicing of the transcripts from two nearly identical ZmIPK1 paralogs suggest that maize has a highly sophisticated

  6. Synthesis and biological activity of substituted-4,5,6,7-tetrahydrothieno pyridines: a review.

    PubMed

    Sangshetti, Jaiprakash N; Zambare, Abhay S; Khan, Firoz A Kalam; Gonjari, Indrajeet; Zaheer, Zahid

    2014-01-01

    4,5,6,7-Tetrahydrothieno pyridine is an important class of heterocyclic nucleus. Various 4,5,6,7-tetrahydrothieno pyridine derivatives have been synthesized and evaluated for various biological activities in different models with desired findings. Some analogs have shown potent biological activities and may be considered as lead molecule for the development of future drugs. Number of drug molecules are available in the market and many molecules are in clinical development containing 4,5,6,7-tetrahydrothieno pyridine nucleus as an important core. This review is an attempt to organize the chemical and biological aspects of 4,5,6,7-tetrahydrothieno pyridine analogs reported in last 20 year to till date. Review mainly focuses on the important role of the core in synthesis of drug or drug intermediates giving emphasis on synthetic schemes and biological activities of the different 4,5,6,7-tetrahydrothieno pyridine analogs. PMID:25373848

  7. The TRPV5/6 calcium channels contain multiple calmodulin binding sites with differential binding properties.

    PubMed

    Kovalevskaya, Nadezda V; Bokhovchuk, Fedir M; Vuister, Geerten W

    2012-06-01

    The epithelial Ca(2+) channels TRPV5/6 (transient receptor potential vanilloid 5/6) are thoroughly regulated in order to fine-tune the amount of Ca(2+) reabsorption. Calmodulin has been shown to be involved into calcium-dependent inactivation of TRPV5/6 channels by binding directly to the distal C-terminal fragment of the channels (de Groot et al. in Mol Cell Biol 31:2845-2853, 12). Here, we investigate this binding in detail and find significant differences between TRPV5 and TRPV6. We also identify and characterize in vitro four other CaM binding fragments of TRPV5/6, which likely are also involved in TRPV5/6 channel regulation. The five CaM binding sites display diversity in binding modes, binding stoichiometries and binding affinities, which may fine-tune the response of the channels to varying Ca(2+)-concentrations. PMID:22354706

  8. Rifting Thick Lithosphere - Canning Basin, Western Australia

    NASA Astrophysics Data System (ADS)

    Czarnota, Karol; White, Nicky

    2016-04-01

    The subsidence histories and architecture of most, but not all, rift basins are elegantly explained by extension of ~120 km thick lithosphere followed by thermal re-thickening of the lithospheric mantle to its pre-rift thickness. Although this well-established model underpins most basin analysis, it is unclear whether the model explains the subsidence of rift basins developed over substantially thick lithosphere (as imaged by seismic tomography beneath substantial portions of the continents). The Canning Basin of Western Australia is an example where a rift basin putatively overlies lithosphere ≥180 km thick, imaged using shear wave tomography. Subsidence modelling in this study shows that the entire subsidence history of the <300 km wide and <6 km thick western Canning Basin is adequately explained by mild Ordovician extension (β≈1.2) of ~120 km thick lithosphere followed by post-rift thermal subsidence. This is consistent with the established model, described above, albeit with perturbations due to transient dynamic topography support which are expressed as basin-wide unconformities. In contrast the <150 km wide and ~15 km thick Fitzroy Trough of the eastern Canning Basin reveals an almost continuous period of normal faulting between the Ordovician and Carboniferous (β<2.0) followed by negligible post-rift thermal subsidence. These features cannot be readily explained by the established model of rift basin development. We attribute the difference in basin architecture between the western and eastern Canning Basin to rifting of thick lithosphere beneath the eastern part, verified by the presence of ~20 Ma diamond-bearing lamproites intruded into the basin depocentre. In order to account for the observed subsidence, at standard crustal densities, the lithospheric mantle is required to be depleted in density by 50-70 kg m-3, which is in line with estimates derived from modelling rare-earth element concentrations of the ~20 Ma lamproites and global isostatic

  9. Decadally resolved quantitative temperature reconstruction spanning 5.6 ka at Kurupa Lake, Arctic Alaska

    NASA Astrophysics Data System (ADS)

    Boldt, B. R.; Kaufman, D. S.; Briner, J. P.

    2012-12-01

    Pre-instrumental quantitative temperature records, fundamental for placing recent warming in the context of long-term, natural climate variability, are scarce in Arctic Alaska. New non-destructive high-resolution core scanning methods provide a means of constructing downcore inference models for various paleoclimate signals. Here we use visible reflectance spectroscopy (VIS-RS) to measure organic pigment (chlorophyll derivative) concentration in sediments from Kurupa Lake to quantitatively reconstruct air temperature in the north-central Brooks Range, Alaska during the past 5.6 ka. Kurupa Lake (N 68.35°, W -154.61°) is 29.7 km2, 40 m at maximum depth, and is fed by several tributaries, including meltwater from eight rapidly disappearing cirque glaciers. A 6.2-m-long core composed of finely laminated (sub-mm to 5 cm) coarse-grained clays to medium-grained silts was collected in 2010 from the primary depocenter of Kurupa Lake (depth = 34 m). The age model for the core is based on six radiocarbon ages and a Pu profile to capture the 1963 spike and 1953 onset of Pu deposition from atmospheric weapons testing. The split-core face was scanned with a Konica Minolta CM-2600d spectrometer at 2 mm intervals, corresponding to 1-2 years. The relative absorption band depth at 660-670 nm (RABD660-670) was used to quantify total sedimentary organic pigments (primarily diagenetic products of chlorophyll-a) as a proxy for primary productivity. Gridded temperature data from the NCEP reanalysis dataset were used for this study because regional weather stations in the Brooks Range are scarce and records discontinuous. The gridded data perform well in this area and are highly correlated (r = 0.88) with the instrumental record from Barrow. Mean May-through-October (warm half-year) temperature (5-year smoothed) from NCEP reanalysis data (130 years) correlates with inferred organic pigment content from Kurupa Lake (r = 0.76, p < 0.001). We chose k-fold cross-validation (k = 10) to

  10. Evaluation of a color-coded Landsat 5/6 ratio image for mapping lithologic differences in western South Dakota

    USGS Publications Warehouse

    Raines, Gary L.; Bretz, R.F.; Shurr, George W.

    1979-01-01

    From analysis of a color-coded Landsat 5/6 ratio, image, a map of the vegetation density distribution has been produced by Raines of 25,000 sq km of western South Dakota. This 5/6 ratio image is produced digitally calculating the ratios of the bands 5 and 6 of the Landsat data and then color coding these ratios in an image. Bretz and Shurr compared this vegetation density map with published and unpublished data primarily of the U.S. Geological Survey and the South Dakota Geological Survey; good correspondence is seen between this map and existing geologic maps, especially with the soils map. We believe that this Landsat ratio image can be used as a tool to refine existing maps of surficial geology and bedrock, where bedrock is exposed, and to improve mapping accuracy in areas of poor exposure common in South Dakota. In addition, this type of image could be a useful, additional tool in mapping areas that are unmapped.

  11. Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

    USGS Publications Warehouse

    Howard, K.A.; Foster, D.A.

    1996-01-01

    We estimate here a geothermal gradient of only 17 ?? 5??C km-1 for the tilted Grayback fault block in southeastern Arizona when extension began ???25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90?? during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220??-240??C isotherm migrated downward 5-6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ???83 Ma in the structurally highest crystalline rocks to ???24 Ma at ???6-km paleodepth and then to ???15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ???5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ???25 Ma. At that time the 110 ?? 10??C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ???5.7 km, and the 220 ?? 30??C isotherm as estimated from zircon data resided at a pretilting basement depth of ???12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ?? 5??C km-1. From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ???1 km m.y.-1.

  12. Efficient alcoholysis of 5,6-dihydro-1,10-phenanthroline-5,6-epoxide with ytterbium(III) triflate and subsequent enantioselective transesterification with lipases

    PubMed Central

    Schoffers, Elke; Kohler, Lars

    2009-01-01

    New 5,6-dihydro-1,10-phenanthroline derivatives were prepared in high yield via ytterbium(III) triflate-catalyzed alcoholysis of the corresponding epoxide. Enzymatic transesterifications of racemic alkoxy alcohols afforded enantioselective separations with up to 99% ee. The lipase derived from Burkholderia cepacia (PSCI) was the most efficient, with E-values of up to 200. The steric effect of substituents in the 6-position on reaction time and enantioselectivities was assessed. PMID:20160975

  13. Hydrogen peroxide generation associated with the oxidations of the eumelanin precursors 5,6-dihydroxyindole and 5,6-dihydroxyindole-2-carboxylic acid.

    PubMed

    Nappi, A J; Vass, E

    1996-10-01

    The ability of iron chelates to promote hydroxyl radical (.OH) formation from hydrogen peroxide (H2O2) via Fenton chemistry was exploited to detect H2O2 produced during the oxidations of the eumelanin precursors 5,6-dihydroxyindole (DHI) and 5,6-dihydroxyindole-2-carboxylic acid (DHICA). H2O2 generation during the autooxidations of DHI and DHICA was confirmed on the basis of the electrochemical detection of three hydroxylation products of salicylate [2,3 and 2,5-dihydroxybenzoic acid (DHBA) and catechol], which was used as an .OH indicator. The oxidations of both 5,6-dihydroxyindoles were augmented by tyrosinase and peroxidase without the addition of H2O2. The partial inhibitions by catalase of the auto-oxidations and tyrosinase- and peroxidase-mediated oxidations of DHI and DHICA provide additional evidence of an endogenous origin of H2O2 during the final stages of eumelanogenesis. The mechanism proposed for the formation of H2O2 involves the semiquinones of DHI and DHICA in the univalent transfer of electrons to molecular oxygen. The observations described in this study support previous reports suggesting that factors modulating the levels of H2O2 in melanocytes and melanoma cells play critical roles in directing the course of melanogenesis and influencing the potential cytotoxicity of the biosynthetic pathways. PMID:8908594

  14. Neutral Wind Observations below 200 km altitudes

    NASA Astrophysics Data System (ADS)

    Watanabe, S.; Abe, T.; Habu, H.; Kakinami, Y.; Larsen, M. F.; Pfaff, R. F., Jr.; Yamamoto, M.

    2015-12-01

    Neutral Wind Observations below 200 km altitudesS. Watanabe1, T. Abe2, H. Habu2, Y. Kakinami3, M. Larsen4, R. Pfaff5, M. Yamamoto6, M-Y. Yamamoto31Hokkaido University/Hokkaido Information University, 2JAXA/ISAS, 3Kochi University of Technology, 4Clemson University, 5NASA/Goddard Space Flight Center, 6Kyoto University, Neutral wind in the thermosphere is one of the key parameters to understand the ionosphere-thermosphere coupling process. JAXA/ISAS successfully launched sounding rockets from Uchinoura Space Center (USC) on September 2, 2007, January 12, 2012, and July 20, 2013, and NASA launched sounding rockets from Kwajalein on May 7, 2013 and from Wallops on July 4, 2013. The rockets installed Lithium and/or TMA canisters as well as instruments for plasma and electric and magnetic fields. The atomic Lithium gases were released at altitudes between 150 km and 300 km in the evening on September 2, 2007, at altitude of ~100 km in the morning on January 12, 2012, at altitude of ~120km in the midnight on July 20, 2013, at altitude between 150 km and 300 km in the evening on May 7, 2013 and at altitude of ~150 km in the noon on July 4, 2013. The Lithium atoms were scattering sunlight by resonance scattering with wavelength of 670nm. However, the Lithium atoms scattered moon light on July 20, 2013. The moon light scattering is the first time to use for thermospheric wind measurement in the midnight. The Lithium clouds/trails and TMA trails showed clearly the neutral wind shears and atmospheric waves at ~150 km altitude in the lower thermosphere for all local time.

  15. Finite-fault slip model of the 2011 Mw 5.6 Prague, Oklahoma earthquake from regional waveforms

    USGS Publications Warehouse

    Sun, Xiaodan; Hartzell, Stephen

    2014-01-01

    The slip model for the 2011 Mw 5.6 Prague, Oklahoma, earthquake is inferred using a linear least squares methodology. Waveforms of six aftershocks recorded at 21 regional stations are used as empirical Green's functions (EGFs). The solution indicates two large slip patches: one located around the hypocenter with a depth range of 3–5.5 km; the other located to the southwest of the epicenter with a depth range from 7.5 to 9.5 km. The total moment of the solution is estimated at 3.37 × 1024 dyne cm (Mw 5.65). The peak slip and average stress drop for the source at the hypocenter are 70 cm and 90 bars, respectively, approximately one half the values for the Mw 5.8 2011 Mineral, Virginia, earthquake. The stress drop averaged over all areas of slip is 16 bars. The relatively low peak slip and stress drop may indicate an induced component in the origin of the Prague earthquake from deep fluid injection.

  16. News from KM3NeT

    SciTech Connect

    Katz, Ulrich F.; Collaboration: KM3NeT Collaboration

    2014-11-18

    KM3NeT is a future research infrastructure in the Mediterranean Sea, hosting a multi-cubic-kilometre neutrino telescope and nodes for Earth and Sea sciences. In this report we shortly summarise the genesis of the KM3NeT project and present key elements of its technical design. The physics objectives of the KM3NeT neutrino telescope and some selected sensitivity estimates are discussed. Finally, some first results from prototype operations and the next steps towards implementation – in particular the first construction phase in 2014/15 – are described.

  17. Status of KM3NeT

    NASA Astrophysics Data System (ADS)

    Riccobene, G.

    2016-07-01

    The recent observation of cosmic neutrinos by IceCube has pushed the quest towards the identification of cosmic sources of high-energy particles. The KM3NeT Collaboration is now ready to launch the massive construction of detection units to be installed in deep sea to build a km-cubic size neutrino telescope. The main elements of the detector, the status of the project and the expected perfomances are briefly reported.

  18. Hepatitis B Virus X Protein Promotes Degradation of SMC5/6 to Enhance HBV Replication.

    PubMed

    Murphy, Christopher M; Xu, Yanping; Li, Feng; Nio, Kouki; Reszka-Blanco, Natalia; Li, Xiaodong; Wu, Yaxu; Yu, Yanbao; Xiong, Yue; Su, Lishan

    2016-09-13

    The hepatitis B virus (HBV) regulatory protein X (HBx) activates gene expression from the HBV covalently closed circular DNA (cccDNA) genome. Interaction of HBx with the DDB1-CUL4-ROC1 (CRL4) E3 ligase is critical for this function. Using substrate-trapping proteomics, we identified the structural maintenance of chromosomes (SMC) complex proteins SMC5 and SMC6 as CRL4(HBx) substrates. HBx expression and HBV infection degraded the SMC5/6 complex in human hepatocytes in vitro and in humanized mice in vivo. HBx targets SMC5/6 for ubiquitylation by the CRL4(HBx) E3 ligase and subsequent degradation by the proteasome. Using a minicircle HBV (mcHBV) reporter system with HBx-dependent activity, we demonstrate that SMC5/6 knockdown, or inhibition with a dominant-negative SMC6, enhance HBx null mcHBV-Gluc gene expression. Furthermore, SMC5/6 knockdown rescued HBx-deficient HBV replication in human hepatocytes. These results indicate that a primary function of HBx is to degrade SMC5/6, which restricts HBV replication by inhibiting HBV gene expression. PMID:27626656

  19. Origins of the 520-km discontinuity

    NASA Astrophysics Data System (ADS)

    Vinnik, Lev

    2016-04-01

    The 520-km discontinuity is often explained by the phase transition from wadsleyite to ringwoodite, although the theoretical impedance of this transition is so small that the related converted and reflected seismic phases could hardly be seen in the seismograms. At the same time there are numerous reports on observations of a large discontinuity at this depth, especially in the data on SS precursors and P-wave wide-angle reflections. Revenaugh and Jordan (1991) argued that this discontinuity is related to the garnet/post-garnet transformation. Gu et al. (1998) preferred very deep continental roots extending into the transition zone. Deuss and Woodhouse proposed splitting of the 520-km discontinuity into two discontinuities, whilst Bock (1994) denied evidence of the 520-km discontinuity in the SS precursors. Our approach to this problem is based on the analysis of S and P receiver functions. Most of our data are related to hot-spots in and around the Atlantic where the appropriate converted phases are often comparable in amplitude with P410s and S410p. Both S and P receiver functions provide strong evidence of a low S velocity in a depth range from 450 km to 510 km at some locations. The 520-km discontinuity appears to be the base of this low-velocity layer. Our observations of the low S velocity in the upper transition zone are very consistent with the indications of a drop in the solidus temperature of carbonated peridotite in the same pressure range (Keshav et al. 2011), and this phenomenon provides a viable alternative to the other explanations of the 520-km discontinuity.

  20. Two 6-substituted 5,6-dihydro-alpha-pyrones from Ravensara anisata.

    PubMed

    Andrianaivoravelona, J O; Sahpaz, S; Terreaux, C; Hostettmann, K; Stoeckli-Evans, H; Rasolondramanitra, J

    1999-09-01

    The leaves and bark dichloromethane extracts of Ravensara anisata showed antifungal activity against the yeast Candida albicans and the phytopathogenic fungus Cladosporium cucumerinum in bioautographic TLC assays. Activity-guided fractionation afforded two new alpha-pyrones: 6R*-(4R*-acetoxy-2S*-hydroxy- 8-phenyloctyl)-5,6-dihydro-2-H-pyran-2-one and 6R*-(2S*-acetoxy-4R*- hydroxy-8-phenyloctyl)-5,6-dihydro-2-H-pyran-2-one. Their structures have been established by NMR spectroscopy, chemical methods and X-ray crystallographic analysis. The antifungal activity against C. albicans and C. cucumerinum was determined for both compounds. PMID:10513401

  1. The Petrographic Analysis of Yucatan Shelf Sequence in UNAM-5, 6 and 7 Wells

    NASA Astrophysics Data System (ADS)

    Nieto, A. O.; Fucugauchi, J. U.

    2013-05-01

    We present the initial results of a stratigraphic, X-ray diffraction and petrographic study of the Cenozoic carbonate sequence in the Yucatan's shelf. The sequence is studied in cores from the UNAM-5, UNAM-6 and UNAM-7 boreholes, which are located in the southwest and southern sectors of the Yucatan state, close to the Ticul Sierra. The Yucatán shelf is an area of scientific interest because beneath the Cenozoic sedimentary deposits there is crater impact of 180-200 km diameter, which formed 65.5 Ma ago. The Yucatan shelf has been characterized to be a shallow ramp shelf that is tectonically stable and has a Cenozoic continuous sedimentary record. With the aim of investigating the nature, stratigraphic relations, textural changes and identify possible events that occurred along the Cenozoic record. Using macroscopic descriptions, we performed detailed stratigraphic columns for the three borehole cores and prepared samples collected across stratigraphic columns for the petrography and the clays identification. The petrographic studies were made at different depths above the K/Pg boundary and whit the aim of recognize the textural variations, and the skeletal content, the identification of dolomite was made by the method of staining thin sections. Analysis of microfacies associations followed the criteria in facies belts Wilson 1975 for carbonate rimmed platforms, using and comparing, while the ramp carbonate microfacies type of Flügel 2009 to homoclinal carbonate ramp platform. The method of X-ray diffraction was used to identify clay types. Three boreholes contain the K/Pg boundary at different depths that correspond to a sequence, from bottom to top of limestone with evaporites nodules, clay content identified as illite-esmectite, little content of benthic, scarce planktic foraminifera and oogonia fossils that correspond to lagoon zone. This sequence is underlying limestones with different degrees of dolomitization that in many cases destroyed all fossils

  2. Analysis of the Rotational Spectra of 2,3,4,5,6-PENTAFLUOROTOLUENE and 1-CHLORO-2,3,4,5,6-PENTAFLUOROBENZENE

    NASA Astrophysics Data System (ADS)

    Osthoff, Ashley A.; Peebles, Rebecca A.; Peebles, Sean A.; Grubbs, Garry S. Grubbs, II; Cooke, Stephen A.; Pate, Brooks H.; Neill, Justin L.; Muckle, Matt T.

    2009-06-01

    The microwave spectra of two substituted pentafluorobenzenes have been obtained. 2,3,4,5,6-Pentafluorotoluene was measured using the FTMW spectrometer at Eastern Illinois University and the chirped-pulse FTMW spectrometer at University of North Texas. The heavy atom structure has been obtained from the assigned ^{13}C transitions and is in reasonable agreement with ab initio calculations at the MP2/6-311++G(2d, 2p) level. The ground state rotational constants are A = 1036.61253(10) MHz, B = 1030.94126(10) MHz, and C = 516.92062(9) MHz, and the single dipole moment component is μ_b = 1.98(17) D. Very small splittings for many of the assigned transitions and multiple, as yet unassigned, lines were presumably due to excited torsional states of the methyl group. In a related study, the microwave spectrum of 1-chloro-2,3,4,5,6-pentafluorobenzene was obtained for both the ^{35}Cl and the ^{37}Cl isotopologues using the chirped-pulse microwave spectrometer at University of Virginia. The preliminary ground state rotational constants for this compound are A = 1028.5403(14) MHz, B = 751.8198(3) MHz and C = 434.3533(4) MHz for ^{35}Cl and A = 1028.5435(7) MHz, B = 734.4786(2) MHz and C = 428.5082(2) MHz for ^{37}Cl. Initial fits of the nuclear quadrupole coupling constants give χ_{aa} = -79.512(15) MHz, χ_{bb} = 43.593(8) MHz, χ_{cc} = 35.92(2) MHz for the ^{35}Cl species and χ_{aa} = -62.68(2) MHz, χ_{bb} = 34.38(4) MHz, χ_{cc} = 28.29(17) MHz for the ^{37}Cl species. These results will be compared with pentafluorotoluene to observe the effects on the structure of the benzene ring when substituting a chlorine atom for a methyl group.

  3. The structure and properties of 5,6-dinitro-1H-benzotriazole

    NASA Astrophysics Data System (ADS)

    Santa María, Dolores; Claramunt, Rosa M.; Torralba, M. Carmen; Torres, M. Rosario; Alkorta, Ibon; Elguero, José

    2016-06-01

    5,6-Dinitro-1H-benzotriazole crystallizes in the monoclinic system, space group P21/c. The asymmetric unit contains the planar 1H-tautomer together with a water molecule of crystallization. Each water molecule is hydrogen bonded to three adjacent 5,6-dinitrobenzotriazoles forming a tape along the b-axis of the crystal. These tapes stack along the c-axis through hydrogen bonds involving the water molecules and one of the nitro groups leading to a bidimensional structure. Solid-state 13C and 15N CPMAS NMR allow to confirm that the tautomer present is the 1H one. In DMSO-d6 solution the results are quite different and, based on GIAO/B3LYP/6-311++G(d,p) calculations, lead us to conclude that the major tautomer is the 5,6-dinitro-2H-benzotriazole, a surprising result that contradicts the rule that the major tautomer in solution coincides with the one present in the crystal. An anhydrous pseudopolymorph of 5,6-dinitro-1H-benzotriazole has been obtained as a non-crystalline form and from solid-state NMR and theoretical calculations, we conclude that it is an 1H-tautomer.

  4. Early development of Drosophila embryos requires Smc5/6 function during oogenesis.

    PubMed

    Tran, Martin; Tsarouhas, Vasilios; Kegel, Andreas

    2016-01-01

    Mutations in structural maintenance of chromosomes (Smc) proteins are frequently associated with chromosomal abnormalities commonly observed in developmental disorders. However, the role of Smc proteins in development still remains elusive. To investigate Smc5/6 function during early embryogenesis we examined smc5 and smc6 mutants of the fruit fly Drosophila melanogaster using a combination of reverse genetics and microscopy approaches. Smc5/6 exhibited a maternally contributed function in maintaining chromosome stability during early embryo development, which manifested as female subfertility in its absence. Loss of Smc5/6 caused an arrest and a considerable delay in embryo development accompanied by fragmented nuclei and increased anaphase-bridge formation, respectively. Surprisingly, early embryonic arrest was attributable to the absence of Smc5/6 during oogenesis, which resulted in insufficient repair of pre-meiotic and meiotic DNA double-strand breaks. Thus, our findings contribute to the understanding of Smc proteins in higher eukaryotic development by highlighting a maternal function in chromosome maintenance and a link between oogenesis and early embryogenesis. PMID:27288507

  5. Can 5-6 Year Old Children Orientate Themselves in a Cave?

    ERIC Educational Resources Information Center

    Jovignot, Francois

    1995-01-01

    Spatial capacities of 36 children ages 5-6 were tested in 3 experiments involving an electronic maze, map training and testing, and finding the way out of a cave using a map. All subjects could use simple maps; this ability improved with age. However, no subject navigated the cave without help, perhaps because of stress or task complexity. (SV)

  6. 2,2\\',3,3\\',4,4\\',5,5\\',6,6\\'-Decabromodiphenyl ether (BDE-209)

    Integrated Risk Information System (IRIS)

    2,2 ' , 3,3 ' , 4,4 ' , 5,5 ' , 6,6 ' - Decabromodiphenyl ether ( BDE - 209 ) ; CASRN 1163 - 19 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process

  7. Early development of Drosophila embryos requires Smc5/6 function during oogenesis

    PubMed Central

    Tran, Martin; Tsarouhas, Vasilios

    2016-01-01

    ABSTRACT Mutations in structural maintenance of chromosomes (Smc) proteins are frequently associated with chromosomal abnormalities commonly observed in developmental disorders. However, the role of Smc proteins in development still remains elusive. To investigate Smc5/6 function during early embryogenesis we examined smc5 and smc6 mutants of the fruit fly Drosophila melanogaster using a combination of reverse genetics and microscopy approaches. Smc5/6 exhibited a maternally contributed function in maintaining chromosome stability during early embryo development, which manifested as female subfertility in its absence. Loss of Smc5/6 caused an arrest and a considerable delay in embryo development accompanied by fragmented nuclei and increased anaphase-bridge formation, respectively. Surprisingly, early embryonic arrest was attributable to the absence of Smc5/6 during oogenesis, which resulted in insufficient repair of pre-meiotic and meiotic DNA double-strand breaks. Thus, our findings contribute to the understanding of Smc proteins in higher eukaryotic development by highlighting a maternal function in chromosome maintenance and a link between oogenesis and early embryogenesis. PMID:27288507

  8. DETERMINATION OF 3,5,6-TRICHLORO-2-PYRIDINOL (TCP) BY ELISA

    EPA Science Inventory

    A sensitive, competitive enzyme-linked immunosorbent assay (ELISA) for 3,5,6-trichloro-2pyridinol (TCP) has been developed to quantitate parts per billion (ppb) amounts of the analyte in urine. TCP is a major metabolite and environmental degradation product of the insecticide c...

  9. Pyrogen fever in rabbits pretreated with p-chlorophenylalanine or 5, 6-dihydroxytryptamine.

    PubMed

    Carruba, M O; Bächtold, H P

    1976-06-15

    The hyperthermic effect of a bacterial pyrogen has been studied in rabbits pretreated or not with p-chlorophenylalanine or 5, 6-dihydroxytryptamine. The results obtained indicate that a selective reduction of cerebral 5-hydroxytryptamine levels by these drugs do not significantly affect pyrogen hypertermia. PMID:133031

  10. IMMUNOHISTOCHEMICAL ANALYSIS OF ZNT1, 4, 5, 6, AND 7 IN THE MOUSE GASTROINTESTINAL TRACT

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Expression of five zinc transporters (ZnT1, 4, 5, 6, and 7) of the Slc30 family in the mouse gastrointestinal tract was studied by immunohistochemical analysis. The results demonstrated unique expression patterns, levels, and cellular localization among ZnT proteins in the mouse gastrointestinal tra...

  11. Viscosity Measurements of Eclogite Melt up to 5.6 GPa and 2000 K

    NASA Astrophysics Data System (ADS)

    Liu, H.; Fei, Y.; Han, L.; Kono, Y.; Hou, M.; Zhao, Z.; Du, J.

    2014-12-01

    The melting and rheology of eclogite is critical for understanding the dynamics of the subduction zone and plate tectonic. Viscosity of eclogite melt as a function of depth is a key parameter to model the long-term chemical evolution of the subduction zone and volcanic magma. It also plays an important role in earthquakes and continent formation. However, the viscosity and rheology of eclogite melt remain poorly understood at high pressure and temperature. In this study, we have carried out in-situ falling-sphere viscometry measurements to determine the viscosity of eclogite melt from 1.3 to 5.6 GPa at temperatures between 1500 and 2000 K, using the Paris-Edinburgh cell at the 16-BM-B beamline of the High Pressure Collaborative Access Team (HPCAT) at the Advanced Photon Source. We used a natural eclogite sample with 47.7wt% SiO2. The viscosity (η) was calculated with the Stokes' equation. The viscosity of eclogite melt decreases between 1.3 and 5.6 GPa at 2000K. At 1.4 GPa and 2000K the viscosity is 0.43 Pa·s, whereas at 5.6 GPa and 2000 K it is 0.13Pa·s. No minimum in the viscosity of eclogite was found in the measured pressure range up to 5.6 GPa.

  12. Assessing change in mouthguard thickness according to the thickness of the original mouthguard sheet.

    PubMed

    Mizuhashi, Fumi; Koide, Kaoru; Takahashi, Mutsumi

    2014-12-01

    The aim of this study was to examine changes in thickness and differences in rate of change of mouthguard thickness according to the thickness of the original sheet used to form the mouthguard. The material used in this study was Sports Mouthguard (3.0, 3.8, and 5.0 mm thicknesses, ethylene vinyl acetate sheet). The sheets were heated until they hung 15 mm from the baseline and were then vacuum formed. The thickness of the mouthguard was measured, and the rate of change of thickness was calculated. The differences in thickness and rate of change of thickness at the labial surface of the central incisor and buccal surface of the first molar according to the thickness of sheet were analyzed by one-way anova, and that of the occlusal surface of the first molar was analyzed by the Kruskal-Wallis test. The results showed that the thickness of mouthguard increased as the thickness of sheet increased (P < 0.05 or P < 0.01). The thickness of the sheet did not affect the rate of change of thickness at the central incisor and occlusal surface of the first molar. Adequate thickness could be obtained using the original sheet with a thickness >3.8 mm at the buccal surface of the first molar and >3.0 mm at the occlusal surface of the first molar. At the central incisor, the necessary thickness of the original sheet was calculated as 5.6 mm. These results would be useful for selecting the appropriate mouthguard sheet material. PMID:24890333

  13. Rhubarb Enema Attenuates Renal Tubulointerstitial Fibrosis in 5/6 Nephrectomized Rats by Alleviating Indoxyl Sulfate Overload

    PubMed Central

    Lu, Fuhua; Liu, Xusheng; Zou, Chuan

    2015-01-01

    Aim To investigate the effects of rhubarb enema treatment using a 5/6 nephrectomized rat model and study its mechanisms. Methods Twenty-eight Sprague Dawley rats were divided into three groups: sham operation group (n = 8), 5/6 nephrectomized (5/6Nx) (n = 10), and 5/6Nx with rhubarb enema treatment (n = 10). The rhubarb enema was continuous for 1.0 month. Serum creatinine, serum indoxyl sulfate (IS) level, renal pathology, tubulointerstitial fibrosis, and renal oxidative stress were assessed. Results 5/6Nx rats showed increasing levels of serum creatinine and severe pathological lesions. Their serum creatinine levels obviously decreased after rhubarb enema treatment (P < 0.05 vs 5/6Nx group). The administration of rhubarb enema attenuated the histopathological changes in 5/6Nx rats. In addition, 5/6Nx rats showed an enhanced extent of tubulointerstitial fibrosis compared with sham rats, and administration of rhubarb enema to 5/6Nx rats ameliorated tubulointerstitial fibrosis. 5/6Nx rats showed increased serum levels of IS, renal oxidative stress, and NF-κB compared with sham rats, whereas administration of rhubarb enema to 5/6Nx rats decreased serum levels of IS, renal oxidative stress, and NF-κB levels. Conclusion Rhubarb enema treatment ameliorates tubulointerstitial fibrosis in the kidneys of 5/6Nx rats, most likely by alleviating IS overload and reducing kidney oxidative stress and inflammatory injury. PMID:26671452

  14. E. coli QueD is a 6-carboxy-5,6,7,8-tetrahydropterin synthase†

    PubMed Central

    McCarty, Reid M.; Somogyi, Árpád; Bandarian, Vahe

    2009-01-01

    To elucidate the early steps required during biosynthesis of a broad class of 7-deazapurine containing natural products, we have studied the reaction catalyzed by Escherichia coli QueD, a 6-pyruvoyl-5,6,7,8-tetrahydropterin synthase (PTPS) homolog possibly involved in queuosine biosynthesis. While mammalian PTPS homologs convert 7,8-dihydroneopterin triphosphate (H2NTP) to 6-pyruvoyltetrahydropterin (PPH4) in biopterin biosynthesis, E. coli QueD catalyzes the conversion of H2NTP to 6-carboxy-5,6,7,8-tetrahydropterin (CPH4). E. coli QueD can also convert PPH4 and sepiapterin to CPH4, allowing a mechanism to be proposed. PMID:19231875

  15. Constructions of Optimal (v,{4,5,6},1,Q)-OOCs

    NASA Astrophysics Data System (ADS)

    Li, Xiyang; Fan, Pingzhi; Wu, Dianhua

    Optical code-division multiple-access (OCDMA) is a promising technique for multimedia transmission in fiber-optic local-area networks (LANs). Variable-weight optical orthogonal codes (OOCs) can be used for OCDMA networks supporting multiple quality of services (QoS). Most constructions for optimal variable-weight OOCs have focused on the case where the number of distinct Hamming weights of all codewords is equal to two, and the codewords of weight 3 are normally included. In this letter, four explicit constructions of optimal (v,{4,5,6},1,Q)-OOCs are presented, and more new optimal (v,{4,5,6},1,Q)-OOCs are obtained via recursive constructions. These improve the existing results on optimal variable-weight OOCs with at least three distinct Hamming weights and minimum Hamming weight 4.

  16. Km3Net Italy - Seafloor network

    NASA Astrophysics Data System (ADS)

    Papaleo, Riccardo

    2016-04-01

    The KM3NeT European project aims to construct a large volume underwater neutrino telescope in the depths of the Mediterranean Sea. INFN and KM3NeT collaboration, thanks to a dedicated funding of 21.000.000 € (PON 2007-2013), are committed to build and deploy the Phase 1 of the telescope, composed of a network of detection units: 8 towers, equipped with single photomultiplier optical modules, and 24 strings, equipped with multi-photomultipliers optical modules. All the towers and strings are connected to the main electro optical cable by means of a network of junction boxes and electro optical interlink cables. Each junction box is an active node able to provide all the necessary power to the detection units and to guarantee the data transmission between the detector and the on-shore control station. The KM3NeT Italia project foresees the realization and the installation of the first part of the deep sea network, composed of three junction boxes, one for the towers and two for the strings. In July 2015, two junction boxes have been deployed and connected to the new cable termination frame installed during the same sea campaign. The third and last one will be installed in November 2015. The status of the deep sea network is presented together with technical details of the project.

  17. Large Circular Basin - 1300-km diameter

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Close-up view of one-half of a 1300-km diameter circular basin the largest observed on Mercury. The other half is hidden beyond the terminator to the left. Hills and valleys extend in a radial fashion outward from the main ring. Interior of the large basin is completely flooded by plains materials; adjacent lowlands are also partially flooded and superimposed on the plains are bowl shaped craters. Wrinkle ridges are abundant on the plains materials. The area shown is 1008 miles (1600 km) from the top to the bottom of the picture. Sun's illumination is from the right. Blurred linear lines extending across the picture near bottom are missing data lines that have been filled in by the computer. Mariner 10 encountered Mercury on Friday, March 29th, 1974, passing the planet on the darkside 431 miles (690-km) from the surface.

    The Mariner 10 mission, managed by the Jet Propulsion Laboratory for NASA's Office of Space Science, explored Venus in February 1974 on the way to three encounters with Mercury-in March and September 1974 and in March 1975. The spacecraft took more than 7,000 photos of Mercury, Venus, the Earth and the Moon.

    NOTE: This image was scanned from physical media.

  18. Dihydro-5,6-dehydrokavain (DDK) from Alpinia zerumbet: Its Isolation, Synthesis, and Characterization.

    PubMed

    Xuan, Tran Dang; Teschke, Rolf

    2015-01-01

    Dihydro-5,6-dehydrokavain (DDK) is the major and most promising component of the tropical plant Alpinia zerumbet (shell ginger), a species of the ginger family Zingiberaceae. Alpinia zerumbet is known for its human use as a traditional herbal medicine, food, and dietary supplement. With its α-lactone ring, DDK belongs to the large chemical group of kavalactones, which are also found in kava (Piper methysticum), another herbal medicine; DDK is characterized by a double-bond linkage at positions 5,6 and the absence of a double-bond linkage at positions 7,8. This dissociates DDK from other kavalactones with their linkages at positions 7,8 and 5,6 that are both either completely saturated or unsaturated, or may have an unsaturated bond at the position 7,8 as well as a saturated bond at the position 5,6. DDK is easily identified and quantified by HPLC and GC. DDK contents in fresh leaves, stems and rhizomes range from 80 to 410 mg/g, requiring solvent extraction procedures to ensure high DDK yield. This is best achieved by hexane extraction from fresh rhizomes that were previously boiled in water, allowing DDK yields of up to 424 mg/g. Successful synthesis of DDK can be achieved by asymmetric pathways, whereas its simple chemical structure facilitates the synthesis of DDK derivatives by HCl hydrolysis. Thus, all synthesized products may be used for various commercial purposes, including the potential development of promising antiobesity pharmaceutical drugs, preparation of specific and safe dietary supplements, and use as effective natural herbicides or fungicides. PMID:26370954

  19. Conformational Changes in Inositol 1,3,4,5,6-Pentakisphosphate 2-Kinase upon Substrate Binding

    PubMed Central

    Baños-Sanz, José Ignacio; Sanz-Aparicio, Julia; Whitfield, Hayley; Hamilton, Chris; Brearley, Charles A.; González, Beatriz

    2012-01-01

    Inositol 1,3,4,5,6-pentakisphosphate 2-kinase (IP5 2-K) catalyzes the synthesis of inositol 1,2,3,4,5,6-hexakisphosphate from ATP and IP5. Inositol 1,2,3,4,5,6-hexakisphosphate is implicated in crucial processes such as mRNA export, DNA editing, and phosphorus storage in plants. We previously solved the first structure of an IP5 2-K, which shed light on aspects of substrate recognition. However, failure of IP5 2-K to crystallize in the absence of inositide prompted us to study putative conformational changes upon substrate binding. We have made mutations to residues on a region of the protein that produces a clasp over the active site. A W129A mutant allowed us to capture IP5 2-K in its different conformations by crystallography. Thus, the IP5 2-K apo-form structure displays an open conformation, whereas the nucleotide-bound form shows a half-closed conformation, in contrast to the inositide-bound form obtained previously in a closed conformation. Both nucleotide and inositide binding produce large conformational changes that can be understood as two rigid domain movements, although local changes were also observed. Changes in intrinsic fluorescence upon nucleotide and inositide binding are in agreement with the crystallographic findings. Our work suggests that the clasp might be involved in enzyme kinetics, with the N-terminal lobe being essential for inositide binding and subsequent conformational changes. We also show how IP5 2-K discriminates between inositol 1,3,4,5-tetrakisphosphate and 3,4,5,6-tetrakisphosphate enantiomers and that substrate preference can be manipulated by Arg130 mutation. Altogether, these results provide a framework for rational design of specific inhibitors with potential applications as biological tools for in vivo studies, which could assist in the identification of novel roles for IP5 2-K in mammals. PMID:22745128

  20. Cytokeratin 5/6 and P63 immunophenotype of thyroid lymphoepithelial complexes.

    PubMed

    Handra-Luca, Adriana; Dragoescu, Ema

    2016-08-01

    Thyroid lymphoepithelial complexes (LECos) are rare, being reported in lymphoma, Graves-Basedow disease, Hashimoto thyroiditis, pericarcinomatous thyroid or in the context of branchial cleft-like cysts. Here we report immunohistochemical expression of cytokeratin 5/6, P63 and TTF1 in 6 cases of thyroid LECos. Two cases had carbimazole treatment for hyperthyroidia and Graves disease. Anti-thyroglobulin, -thyroperoxidase or -TSH antibodies were detected in 4 cases. NSAID or poviodone iodine allergy were present in 2 cases. The treatment consisted in total thyroidectomy or lobectomy. Microscopy showed nodular goiter and focal lymphocytic thyroiditis. Basaloid LECos were seen in all thyroids while squamoid LECos in 2. Associated lesions were papillary thyroid microcarcinoma (2 cases), solid cell nest, thyroglosal duct remnant, lymphoepithelial cyst and thymus-parathyroid unit (one case each). Cytokeratin 5/6 was expressed in both squamoid and basaloid LECos along with P63. TTF1 expression was faint or absent. In conclusion LECos may occur in the context of autoimmune thyroiditis or of a specific immune susceptibility background. The expression of CK5/6 and of P63 suggests a squamous differentiation including in the basaloid LECos. The etiologic relevance of these immunostainings remains limited although rather suggestive of a metaplastic process than of migration-abnormalities. PMID:27130144

  1. A case of T2 radiculopathy after anterior C5-6 fusion.

    PubMed

    Takenaka, Tomofumi; Ohnishi, Yu-Ichiro; Oshino, Satoru

    2016-01-01

    Thoracic radiculopathy is a rare entity. Symptomatic adjacent-segment disease after anterior cervical fusion occurs commonly in the lower cervical spine segment. We describe the clinical presentation and treatment of T2 radiculopathy after C5-6 anterior fusion. A 60-year-old man presented with the right axillary pain for 3 months. He had undergone C5-6 anterior fusion for cervical spondylosis 5 years prior. Computed tomography (CT) and magnetic resonance images showed T2-3 degenerative disease. C5-6 anterior fusion exacerbated the T2-3 segment involved in the patient's scoliotic deformity. After 2 months of conservative treatment, we decompressed the T2 foramen via T2-3 hemilaminectomy and partial facet resection. After the surgery, his symptoms disappeared. T2 radiculopathy is rare but should be considered in the differential diagnosis of chest pain. Surgeons should pay attention not only to adjacent-segment disease but also to segmental degeneration at the apex of a scoliotic deformity after cervical anterior fusion. PMID:27197614

  2. Global anisotropy and the thickness of continents.

    PubMed

    Gung, Yuancheng; Panning, Mark; Romanowicz, Barbara

    2003-04-17

    For decades there has been a vigorous debate about the depth extent of continental roots. The analysis of heat-flow, mantle-xenolith and electrical-conductivity data all indicate that the coherent, conductive part of continental roots (the 'tectosphere') is at most 200-250 km thick. Some global seismic tomographic models agree with this estimate, but others suggest that a much thicker zone of high velocities lies beneath continental shields, reaching a depth of at least 400 km. Here we show that this disagreement can be reconciled by taking into account seismic anisotropy. We show that significant radial anisotropy, with horizontally polarized shear waves travelling faster than those that are vertically polarized, is present under most cratons in the depth range 250-400 km--similar to that found under ocean basins at shallower depths of 80-250 km. We propose that, in both cases, the anisotropy is related to shear in a low-viscosity asthenospheric channel, located at different depths under continents and oceans. The seismically defined 'tectosphere' is then at most 200-250 km thick under old continents. The 'Lehmann discontinuity', observed mostly under continents at about 200-250 km, and the 'Gutenberg discontinuity', observed under oceans at depths of about 60-80 km, may both be associated with the bottom of the lithosphere, marking a transition to flow-induced asthenospheric anisotropy. PMID:12700758

  3. Crustal thickness from 3D MCS data collected over the fast-spreading East Pacific Rise at 9°50'N

    NASA Astrophysics Data System (ADS)

    Aghaei, O.; Nedimović, M. R.; Canales, J.; Carton, H. D.; Carbotte, S. M.; Mutter, J. C.

    2011-12-01

    We compute, analyze and present crustal thickness variations for a section of the fast-spreading East Pacific Rise (EPR). The area of 3D coverage is between 9°38'N and 9°58' N (~1000 km2), where the documented eruptions of 1990-91 and 2005-06 occurred. The crustal thickness is computed by depth converting the two-way reflection travel times from the seafloor to the Moho. The seafloor and Moho reflections are picked on the migrated stack volume produced from the 3D multichannel seismic (MCS) data collected on R/V Marcus G. Langseth in summer of 2008 during cruise MGL0812. The crustal velocities used for depth conversion were computed by Canales et al. (2003; 2011) by simultaneous inversion of seismic refractions and wide-angle Moho reflection traveltimes from four ridge-parallel and one ridge-perpendicular ocean bottom seismometer (OBS) profile for which data were collected during the 1998 UNDERSHOOT experiment. The MCS data analysis included 1D and 2D filtering, offset-dependent spherical divergence correction, surface-consistent amplitude correction, common midpoint (CMP) sort with flex binning, velocity analysis, normal moveout, and CMP stretch mute. The poststack processing includes seafloor multiple mute and 3D Kirchhoff poststack time migration. Here we use the crustal thickness and Moho seismic signature variations to detail their relationship with ridge segmentation, crustal age, bathymetry, and on- and off-axis magmatism. On the western flank (Pacific plate) from 9°41' to 9°48', the Moho reflection is strong. From 9°48' to 9°52', the Moho reflection varies from moderate to weak and disappears from ~3 km to ~9 km from the ridge axis. On the eastern flank (Cocos plate) from 9°41' to 9°51', the Moho reflection varies from strong to moderate. From 9°51' to 9°54' the Moho reflection varies from moderate to weak and disappears beneath a region ~3 km to ~9 km from the axis. On the Cocos plate, across-axis crustal thickness variations (5.5-6.2 km) show a

  4. The model of lithospheric thickness beneath China from gravity data

    NASA Astrophysics Data System (ADS)

    Zhang, H.; Ravat, D.

    2015-12-01

    We compare estimates of lithospheric thickness from several studies in China and examine whether the available gravity field anomalies can constrain these estimates. Ma (1987) suggested based on integrated geophysics that the lithospheric thickness varies from ~130 km in Qinling Dabie orogenic belt to ~60 km in Beijing, and ~50 km in Bohai bay. Lebedev and Nolet (2003) determined the lithospheric thickness in Bohai bay to be ~140 km from S wave tomography. Sodoudi et al.'s (2006) estimate of the lithospheric thickness is 72 km in Qinling Dabie orogenic belt and ~60 km in north China block. Since physical character differences exist between lithosphere and asthenosphere, it is possible to determine the thickness of lithospheric though gravity data. In this study, we use the crustal thickness obtained from teleseismic receiver functions (Li et al., 2014) to model the Moho gravity field variation and then remove this variation from the observed gravity field. Based on the residual field, the lithospheric thickness is obtained by the Parker inversion. Results show that the lithospheric thickness beneath China varies from ~80 km in the north of XinJiang to ~140 km in Tibet, and it changes to ~100 km in Eastern China. The residual field used for inversion is smooth which results in a smooth lithosphere-asthenosphere boundary (LAB). The LAB is generally in agreement with the previous seismic inversion result along profiles in eastern China (e.g. Li et al., 2011) and suggests that our method could be used to estimate the regional lithospheric variation in other areas in China, and somewhere else.

  5. Global modeling with GEOS-5 from 50-km to 1-km with a single unified GCM

    NASA Astrophysics Data System (ADS)

    Putman, William; Suarez, Max; Molod, Andrea; Barahona, Donifan

    2015-04-01

    The Goddard Earth Observing System model (GEOS-5) of the Global Modeling and Assimilation Office (GMAO) at NASA Goddard Space Flight Center is uniquely designed to adapt to increasing resolution. This supports application of GEOS-5 for decadal scale climate simulation and reanalysis with a horizontal resolution of 50-kilometers (km), high-resolution numerical weather prediction at 25- to 14-km, and global mesoscale modeling at resolutions of 7- to 1.5-km. Resolution-aware parameterizations and dynamics support this diverse portfolio of applications within a single unified GEOS-5 GCM code-base. We will discuss the adaptation of physics parameterizations with increasing resolution. This includes the role of deep convective parameterization, the move to an improved two-moment microphysics scheme, the need for shallow convective parameterization, and the role of non-hydrostatic dynamics and implicit/explicit damping. Parameterization and dynamics evaluation are explored not only in global integrations with GEOS-5 but with radiative convective equilibrium tests that permit the rapid exploration of high-resolution simulations in a smaller doubly periodic Cartesian domain. Simulation results will highlight intercomparisons of model biases in cloud forcing and precipitation from the 30-year 50-km MERRA-2 reanalysis, 50- to 25-km free-running AMIP simulations, a 2-year 7-km global mesoscale simulation, and monthly global simulations at 3.5-km. A global 1.5-km simulation with GEOS-5 highlights our pursuit of truly convection permitting global simulations with GEOS-5. The tuning evaluation for this simulation using doubly periodic radiative convective equilibrium experiments will be discussed.

  6. Emissions from an international airport increase particle number concentrations 4-fold at 10 km downwind.

    PubMed

    Hudda, Neelakshi; Gould, Tim; Hartin, Kris; Larson, Timothy V; Fruin, Scott A

    2014-06-17

    We measured the spatial pattern of particle number (PN) concentrations downwind from the Los Angeles International Airport (LAX) with an instrumented vehicle that enabled us to cover larger areas than allowed by traditional stationary measurements. LAX emissions adversely impacted air quality much farther than reported in previous airport studies. We measured at least a 2-fold increase in PN concentrations over unimpacted baseline PN concentrations during most hours of the day in an area of about 60 km(2) that extended to 16 km (10 miles) downwind and a 4- to 5-fold increase to 8-10 km (5-6 miles) downwind. Locations of maximum PN concentrations were aligned to eastern, downwind jet trajectories during prevailing westerly winds and to 8 km downwind concentrations exceeded 75 000 particles/cm(3), more than the average freeway PN concentration in Los Angeles. During infrequent northerly winds, the impact area remained large but shifted to south of the airport. The freeway length that would cause an impact equivalent to that measured in this study (i.e., PN concentration increases weighted by the area impacted) was estimated to be 280-790 km. The total freeway length in Los Angeles is 1500 km. These results suggest that airport emissions are a major source of PN in Los Angeles that are of the same general magnitude as the entire urban freeway network. They also indicate that the air quality impact areas of major airports may have been seriously underestimated. PMID:24871496

  7. Linear polarization variations modulo 5.6 days in HDE 226868

    NASA Technical Reports Server (NTRS)

    Nolt, I. G.; Kemp, J. C.; Rudy, R. J.; Southwick, R. G.; Radostitz, J. V.; Caroff, L. J.

    1975-01-01

    Results are reported for observations of variations in the linear polarization in HDE 226868 (the optical counterpart of Cyg X-1) made with a photoelastic polarimeter and a U-filter. The UV linear-polarization variations, as folded on the 5.6-day orbital period, are found to have amplitudes of 0.25% and position-angle changes of 2.7 deg. These results are shown to be consistent with the geometry and phasing required by the model of the binary system.

  8. Rare-earth plasma extreme ultraviolet sources at 6.5-6.7 nm

    SciTech Connect

    Otsuka, Takamitsu; Higashiguchi, Takeshi; Yugami, Noboru; Yatagai, Toyohiko; Kilbane, Deirdre; White, John; Dunne, Padraig; O'Sullivan, Gerry; Jiang, Weihua; Endo, Akira

    2010-09-13

    We have demonstrated a laser-produced plasma extreme ultraviolet source operating in the 6.5-6.7 nm region based on rare-earth targets of Gd and Tb coupled with a Mo/B{sub 4}C multilayer mirror. Multiply charged ions produce strong resonance emission lines, which combine to yield an intense unresolved transition array. The spectra of these resonant lines around 6.7 nm (in-band: 6.7 nm {+-}1%) suggest that the in-band emission increases with increased plasma volume by suppressing the plasma hydrodynamic expansion loss at an electron temperature of about 50 eV, resulting in maximized emission.

  9. Photophysics of poly(2,3,4,5,6-pentafluorostyrene) film

    SciTech Connect

    O'Connor, D.B.; Scott, G.W. ); Coulter, D.R.; Miskowski, V.M.; Yavrouian, A. )

    1990-08-09

    The temperature-dependent steady-state emission, emission polarization anisotropy, and fluorescence kinetics of poly(2,3,4,5,6-pentafluorostyrene) film are reported. Two interconverting excited-state conformations of the chromophore have been identified. The fluorescence of the higher energy conformation results from excitation on the red edge of the polymer absorption band at temperatures below 180 K. The energy barrier for conversion of the higher energy conformer to the lower energy conformer is estimated to be E/hc = 27 {plus minus} 7 cm{sup {minus}1}. Electronic energy migration is not evident in this polymer.

  10. Predicting km-scale shear zone formation

    NASA Astrophysics Data System (ADS)

    Gerbi, Christopher; Culshaw, Nicholas; Shulman, Deborah; Foley, Maura; Marsh, Jeffrey

    2015-04-01

    Because km-scale shear zones play a first-order role in lithospheric kinematics, accurate conceptual and numerical models of orogenic development require predicting when and where they form. Although a strain-based algorithm in the upper crust for weakening due to faulting appears to succeed (e.g., Koons et al., 2010, doi:10.1029/2009TC002463), a comparable general rule for the viscous crust remains unestablished. Here we consider two aspects of the geological argument for a similar algorithm in the viscous regime, namely (1) whether predicting km-scale shear zone development based on a single parameter (such as strain or shear heating) is reasonable; and (2) whether lithologic variability inherent in most orogenic systems precludes a simple predictive rule. A review of tectonically significant shear zones worldwide and more detailed investigations in the Central Gneiss belt of the Ontario segment of the Grenville Province reveals that most km-scale shear zones occur at lithological boundaries and involve mass transfer, but have fairly little else in common. As examples, the relatively flat-lying Twelve Mile Bay shear zone in the western Central Gneiss belt bounds the Parry Sound domain and is likely the product of both localized anatexis and later retrograde hydration with attendant metamorphism. Moderately dipping shear zones in granitoids of the Grenville Front Tectonic Zone apparently resulted from cooperation among several complementary microstructural processes, such as grain size reduction, enhanced diffusion, and a small degree of metamorphic reaction. Localization into shear zones requires the operation of some spatially restricted processes such as stress concentration, metamorphism/fluid access, textural evolution, and thermal perturbation. All of these could be due in part to strain, but not necessarily linearly related to strain. Stress concentrations, such as those that form at rheological boundaries, may be sufficient to nucleate high strain

  11. Smc5/6-Mms21 Prevents and Eliminates Inappropriate Recombination Intermediates in Meiosis

    PubMed Central

    Xaver, Martin; Huang, Lingzhi; Chen, Doris; Klein, Franz

    2013-01-01

    Repairing broken chromosomes via joint molecule (JM) intermediates is hazardous and therefore strictly controlled in most organisms. Also in budding yeast meiosis, where production of enough crossovers via JMs is imperative, only a subset of DNA breaks are repaired via JMs, closely regulated by the ZMM pathway. The other breaks are repaired to non-crossovers, avoiding JM formation, through pathways that require the BLM/Sgs1 helicase. “Rogue” JMs that escape the ZMM pathway and BLM/Sgs1 are eliminated before metaphase by resolvases like Mus81-Mms4 to prevent chromosome nondisjunction. Here, we report the requirement of Smc5/6-Mms21 for antagonizing rogue JMs via two mechanisms; destabilizing early intermediates and resolving JMs. Elimination of the Mms21 SUMO E3-ligase domain leads to transient JM accumulation, depending on Mus81-Mms4 for resolution. Absence of Smc6 leads to persistent rogue JMs accumulation, preventing chromatin separation. We propose that the Smc5/6-Mms21 complex antagonizes toxic JMs by coordinating helicases and resolvases at D-Loops and HJs, respectively. PMID:24385936

  12. Thermal responses to 5. 6-GHz radiofrequency radiation in anesthetized rats. Effect of chlorpromazine

    SciTech Connect

    Jauchem, J.R.; Frei, M.R.; Heinmets, F.

    1988-01-01

    Anesthetized rats were exposed to 5.6-GHz continuous-wave radiofrequency radiation (RFR) at an average power density of 60 mW/Sq. cm (average specific absorption rate 12 W/kg). Exposure was performed to raise colonic temperature from 38.5 to 39.5C. Following acute administration of chlorpromazine, body temperature exhibited a faster return to baseline temperature when exposure was discontinued. When exposure was initiated at 38.5C and continued until lethal temperature resulted, chlorpromazine-treated animals exhibited significantly shorter survival times than saline-treated animals. Thus, although chlorpromazine enhanced thermoregulatory efficiency at colonic temperature below 39.5 deg C, the drug caused increased susceptibility to terminal RFR. The present results, when compared with previous studies of irradiation at 2.8 GHz, indicate that the effects of chlorpromazine on thermal response to RFR during intermittent and terminal exposure are similar at both 2.8 and 5.6 GHz.

  13. Thermal responses to 5. 6-GHz radiofrequency radiation in anesthetized rats: effect of chlorpromazine

    SciTech Connect

    Jauchem, J.R.; Frei, M.R.; Heinmets, F.

    1988-01-01

    Anesthetized rats were exposed to 5.6-GHz continuous wave radiofrequency radiation at an average power density of 60 mW/cm2 (average specific absorption rate 12 W/kg). Exposure was performed to raise colonic temperature from 38.5 to 39.5 degrees C. Following acute administration of chlorpromazine, body temperature exhibited a faster return to baseline temperature when exposure was discontinued. When exposure was initiated at 38.5 degrees C and continued until lethal temperatures resulted, chlorpromazine-treated animals exhibited significantly shorter survival times than saline-treated animals. Thus, although chlorpromazine enhanced thermo-regulatory efficiency at colonic temperatures below 39.5 degrees C, the drug caused increased susceptibility to terminal radiofrequency radiation exposure. The present results, when compared to previous studies of irradiation at 2.8 GHz, indicate that the effects of chlorpromazine on thermal responses to RFR during intermittent and terminal exposure are similar at both 2.8 and 5.6 GHz.

  14. MnTBAP Therapy Attenuates Renal Fibrosis in Mice with 5/6 Nephrectomy

    PubMed Central

    Yu, Jing; Mao, Song; Zhang, Yue; Gong, Wei; Jia, Zhanjun; Huang, Songming; Zhang, Aihua

    2016-01-01

    Renal fibrosis is a common pathological feature of all kinds of chronic kidney diseases (CKDs) with uncertain mechanisms. Accumulating evidence demonstrated an important role of oxidative stress in the pathogenesis of CKD. Here we hypothesized that MnTBAP (manganese (III) tetrakis (4-benzoic acid)porphyrin chloride), a cell-permeable mimic of superoxide dismutase (SOD), may protect against the fibrotic response in CKD by antagonizing oxidative stress. To verify this hypothesis, we performed experiments in tubular epithelial cells and mice with 5/6 nephrectomy (Nx). In mouse tubular epithelial cells, TGF-β1 induced a significant transition to fibrotic phenotype in line with a remarkable mitochondrial dysfunction, which was markedly improved by MnTBAP (1.14 μM) pretreatment. In remnant kidneys of 5/6 Nx mice, tubulointerstitial fibrosis occurred in parallel with mitochondrial abnormality in renal tubular cells. Administration of MnTBAP significantly attenuated the deposition of extracellular matrix as evidenced by the blocked expressions of fibronectin, collagen I, and collagen III. Masson staining also displayed an ameliorated accumulation of collagenous matrix in MnTBAP-treated mice. Moreover, MnTBAP also significantly improved the severity of proteinuria without altering CKD-related hypertension. Collectively, MnTBAP therapy served as a promising strategy in preventing renal fibrosis in CKDs possibly via antagonizing mitochondrial-derived oxidative stress and subsequent protection of mitochondrial function. PMID:26989454

  15. Excision repair of 5,6-dihydroxydihydrothymine from the DNA of Micrococcus radiodurans

    SciTech Connect

    Targovnik, H.S.; Hariharan, P.V.

    1980-08-01

    One of the major ionizing radiation products, 5,6-dihydroxydihydrothymine (thymine glycol), was measured in the DNA of Micrococcus radiodurans following exposure of cells to 6.8-MeV electrons or 254-nm ultraviolet light. Removal of 5,6-dihydroxydihydrothymine was measured in both an ionizing radiation-sensitive strain (262) and a highly radioresistant strain (the wild type W/sup +/) of Micrococcus radiodurans. Within 30 min of incubation (33/sup 0/C) following exposure to ultraviolet light (2400 J/m/sup 2/) approximately 60% of the thymine glycols were excised, whereas in the case of ionizing radiation (250 krad) only 35% were removed from the cellular DNA of the wild-type strain. In contrast less than 50% of the thymine glycols were excised from the sensitive strain. The amount of DNA degradation induced by radiation was less than 10% in both strains. The results suggest a possible correlation between reduced excision repair of base damage and increased radiation sensitivity.

  16. Destabilized SMC5/6 complex leads to chromosome breakage syndrome with severe lung disease.

    PubMed

    van der Crabben, Saskia N; Hennus, Marije P; McGregor, Grant A; Ritter, Deborah I; Nagamani, Sandesh C S; Wells, Owen S; Harakalova, Magdalena; Chinn, Ivan K; Alt, Aaron; Vondrova, Lucie; Hochstenbach, Ron; van Montfrans, Joris M; Terheggen-Lagro, Suzanne W; van Lieshout, Stef; van Roosmalen, Markus J; Renkens, Ivo; Duran, Karen; Nijman, Isaac J; Kloosterman, Wigard P; Hennekam, Eric; Orange, Jordan S; van Hasselt, Peter M; Wheeler, David A; Palecek, Jan J; Lehmann, Alan R; Oliver, Antony W; Pearl, Laurence H; Plon, Sharon E; Murray, Johanne M; van Haaften, Gijs

    2016-08-01

    The structural maintenance of chromosomes (SMC) family of proteins supports mitotic proliferation, meiosis, and DNA repair to control genomic stability. Impairments in chromosome maintenance are linked to rare chromosome breakage disorders. Here, we have identified a chromosome breakage syndrome associated with severe lung disease in early childhood. Four children from two unrelated kindreds died of severe pulmonary disease during infancy following viral pneumonia with evidence of combined T and B cell immunodeficiency. Whole exome sequencing revealed biallelic missense mutations in the NSMCE3 (also known as NDNL2) gene, which encodes a subunit of the SMC5/6 complex that is essential for DNA damage response and chromosome segregation. The NSMCE3 mutations disrupted interactions within the SMC5/6 complex, leading to destabilization of the complex. Patient cells showed chromosome rearrangements, micronuclei, sensitivity to replication stress and DNA damage, and defective homologous recombination. This work associates missense mutations in NSMCE3 with an autosomal recessive chromosome breakage syndrome that leads to defective T and B cell function and acute respiratory distress syndrome in early childhood. PMID:27427983

  17. Structural basis of Wnt signaling inhibition by Dickkopf binding to LRP5/6

    PubMed Central

    Ahn, Victoria E.; Chu, Matthew Ling-Hon; Choi, Hee-Jung; Tran, Denise; Abo, Arie; Weis, William I.

    2011-01-01

    Summary LDL receptor-related proteins 5 and 6 (LRP5/6) are co-receptors for Wnt growth factors, and also bind Dkk proteins, secreted inhibitors of Wnt signaling. The LRP5/6 ectodomain contains four β-propeller/EGF-like domain repeats. The first two repeats (LRP6(1-2)) bind to several Wnt variants, whereas LRP6(3-4) binds other Wnts. We present the crystal structure of the Dkk1 C-terminal domain bound to LRP6(3-4), and show that the Dkk1 N-terminal domain binds to LRP6(1-2), demonstrating that a single Dkk1 molecule can bind to both portions of the LRP6 ectodomain and thereby inhibit different Wnts. Small-angle x-ray scattering analysis of LRP6(1-4) bound to a non-inhibitory antibody fragment or to full-length Dkk1 shows that in both cases the ectodomain adopts a curved conformation that places the first three repeats at a similar height relative to the membrane. Thus, Wnts bound to either portion of the LRP6 ectodomain likely bear a similar spatial relationship to Frizzled co-receptors. PMID:22000856

  18. Ubiquitous Low-Velocity Layer Atop the 410-km Discontinuity in the Northern Rocky Mountains

    NASA Astrophysics Data System (ADS)

    Jasbinsek, J. J.; Dueker, K. G.

    2006-12-01

    Receiver functions (RF) from three 30-station IRIS-PASSCAL small aperture arrays (2-15 km station spacing) operated for ten months each in the northern Rocky Mountains show a ubiquitous negative polarity P to S arrival (NPA) just preceding the 410-km discontinuity arrival. Data from the arrays was divided into NW, SE and SW backazimuths and stacked to form nine quadrant stacks (QS). Remarkably, the NPA is apparent in 8 of the 9 QS, with 7 of the 8 displaying a similar dipole shape (paired negative and positive swings). Each QS contains clear P to S arrivals from the 410- and 660-km discontinuities and display the correct moveout. To model the NPA, a "double gradient slab" model consisting of five parameters is used: top gradient thickness and shear wave velocity drop; a constant velocity layer; bottom gradient thickness and shear wave velocity increase. Model misfit is assessed via a grid search over the model space using a reflectivity code to calculate synthetic seismograms. Assessment of model likelihood is done by calculating 1- and 2-D marginal probability density functions (PDF). Model parameters for each QS are well resolved and uncorrelated, with the exception of the anti-correlation of the top and bottom gradients. To define an average model, the probability distributions of each QS for each parameter are multiplied to form summary 1-D marginal PDF from which 90% probability bounds are calculated. These probability bounds are: the top gradient is < 8 km with a velocity decrement of 0.3-0.5 km/s; the constant velocity layer thickness is < 5 km; and, the bottom gradient is 29-37 km with a velocity increase of 0.4-0.6 km/s. The effective width of the low velocity layer atop the 410 (herein called the 410-LVL) is characterized as the layer thickness plus half the two gradient widths. Thus, the 410-LVL is found to have a mean thickness of 26 km and a mean shear wave velocity decrement of 8.3%. These results contrast with 410-LVL widths of 25-90 km and shear

  19. Study of a conjugate Pc 5-6 magnetic and absorption pulsation event at subauroral latitudes in the morning sector

    SciTech Connect

    Oksman, J.; Rosenberg, T.J. ); Lanzerotti, L.J.; MaClennan, C.G. ); Singer, H.J. )

    1988-06-01

    An interval of long-period hydromagnetic wave activity occurring in the decay phase of a magnetic storm has been studied using ground-based magnetic field and cosmic noise absorption data recorded at L {approx lt} 4.2. There is some evidence in the data for the wave frequencies to be {approximately} 0.2 mHz lower at L {approximately} 3.0-3.2 than at L {approximately} 3.8-4.2. The low wave frequencies are inconsistent with resonant oscillations of the field lines within the L shell range and probable magnetosphere plasma density conditions of observation. The waves were observed to propagate westward over at least 3 hours of local time, near dawn. An azimuthal wave number m {approx} 9 and a westward phase velocity varying from {approximately} 2.5 to {approximately} 7.5 km s{sup {minus}1} at 55{degree} magnetic latitude characterized the event. The low azimuthal phase velocities make it unlikely that the waves were generated by the Kelvin-Helmholtz instability on the magnetopause. These Pc 5-6 waves appear to be odd mode, locally driven nonresonant oscillations. The ULF wave generation and propagation were most likely located on geomagnetic field lines in the range 3.5 {approx lt} L {approx lt} 6 in the region of hot storm time plasma outside the plasmapause where a gradient in particle precipitation flux was also observed. Neither the drift mirror instability nor the compressional drift wave instability appears to be a likely source for these waves. Modulation by the ULF waves of the pitch angle diffusion of energetic electrons injected into outer radiation zone during the magnetospheric storm is suggested to account for the cosmic noise absorption pulsations observed outside the plasmapause. Irregular plasma density gradients in this region, inferred from the propagation characteristics of whistler mode VLF signals, may have caused the observed H-D plane wave polarization variations.

  20. Variations in effective elastic thickness of the North American lithosphere

    NASA Technical Reports Server (NTRS)

    Bechtel, Timothy D.; Forsyth, Donald W.; Sharpton, Virgil L.; Grieve, Richard A. F.

    1990-01-01

    A technique for estimating flexural rigidity that is not limited to sedimentary basins is used here to map variations in the effective elastic thickness of the North American lithosphere. The effective elastic thickness ranges from a minimum of about 4 km in the Basin and Range Province to more than 100 km in the Precambrian core of the continent. This finding supports the idea that flexural rigidity has increased with time since the last thermal event.

  1. 45 Km Horizontal Path Optical Link Experiment

    NASA Technical Reports Server (NTRS)

    Biswas, A.; Ceniceros, J.; Novak, M.; Jeganathan, M.; Portillo, A.; Erickson, D.; Depew, J.; Sanii, B.; Lesh, J. R.

    2000-01-01

    Mountain-top to mountain-top optical link experiments have been initiated at JPL, in order to perform a systems level evaluation of optical communications. Progress made so far is reported. ne NASA, JPL developed optical communications demonstrator (OCD) is used to transmit a laser signal from Strawberry Peak (SP), located in the San Bernadino mountains of California. This laser beam is received by a 0.6 m aperture telescope at JPL's Table Mountain Facility (TMF), located in Wrightwood, California. The optical link is bi-directional with the TMF telescope transmitting a continuous 4-wave (cw) 780 run beacon and the OCD sending back a 840 nm, 100 - 500 Mbps pseudo noise (PN) modulated, laser beam. The optical link path is at an average altitude of 2 km above sea level, covers a range of 46.8 km and provides an atmospheric channel equivalent to approx. 4 air masses. Average received power measured at either end fall well within the uncertainties predicted by link analysis. The reduction in normalized intensity variance (sigma(sup 2, sub I)) for the 4-beam beacon, compared to each individual beam, at SP, was from approx. 0.68 to 0.22. With some allowance for intra-beam mis-alignment, this is consistent with incoherent averaging. The sigma(sup2, sub I) measured at TMF approx. 0.43 +/- 0.22 exceeded the expected aperture averaged value of less than 0.1, probably because of beam wander. The focused spot sizes of approx. 162 +/- 6 microns at the TMF Coude and approx. 64 +/- 3 microns on the OCD compare to the predicted size range of 52 - 172 microns and 57 - 93 microns, respectively. This is consistent with 4 - 5 arcsec of atmospheric "seeing". The preliminary evaluation of OCD's fine tracking indicates that the uncompensated tracking error is approx. 3.3 micro rad compared to approx. 1.7 micro rad observed in the laboratory. Fine tracking performance was intermittent, primarily due to beacon fades on the OCD tracking sensor. The best bit error rates observed while

  2. Thickness of western mare basalts

    NASA Technical Reports Server (NTRS)

    Dehon, R. A.

    1979-01-01

    An isopach map of the basalt thickness in the western mare basins is constructed from measurements of the exposed external rim height of partially buried craters. The data, although numerically sparse, is sufficiently distributed to yield gross thickness variations. The average basalt thickness in Oceanus Procellarum and adjacent regions is 400 m with local lenses in excess of 1500 m in the circular maria. The total volume of basalt in the western maria is estimated to be in the range of 1.5 x 10 to the 6th power cu km. The chief distinction between the eastern and western maria appears to be one of basalt volumes erupted to the surface. Maximum volumes of basalt are deposited west of the central highlands and flood subjacent terrain to a greater extent than on the east. The surface structures of the western maria reflect the probability of a greater degree of isostatic response to a larger surface loading by the greater accumulation of mare basalt.

  3. Two tautomeric forms of 2-amino-5,6-dimethylpyrimidin-4-one.

    PubMed

    Hall, Victoria M; Bertke, Jeffery A; Swift, Jennifer A

    2016-06-01

    Derivatives of 4-hydroxypyrimidine are an important class of biomolecules. These compounds can undergo keto-enol tautomerization in solution, though a search of the Cambridge Structural Database shows a strong bias toward the 3H-keto tautomer in the solid state. Recrystallization of 2-amino-5,6-dimethyl-4-hydroxypyrimidine, C6H9N3O, from aqueous solution yielded triclinic crystals of the 1H-keto tautomer, denoted form (I). Though not apparent in the X-ray data, the IR spectrum suggests that small amounts of the 4-hydroxy tautomer are also present in the crystal. Monoclinic crystals of form (II), comprised of a 1:1 ratio of both the 1H-keto and the 3H-keto tautomers, were obtained from aqueous solutions containing uric acid. Forms (I) and (II) exhibit one-dimensional and three-dimensional hydrogen-bonding motifs, respectively. PMID:27256693

  4. Sequential Injection/Electrochemical Immunoassay for Quantifying the Pesticide Metabolite 3, 5, 6-Trichloro-2-Pyridinol

    SciTech Connect

    Liu, Guodong; Riechers, Shawn L.; Timchalk, Chuck; Lin, Yuehe

    2005-12-04

    An automated and sensitive sequential injection electrochemical immunoassay was developed to monitor a potential insecticide biomarker, 3, 5, 6-trichloro-2-pyridinol. The current method involved a sequential injection analysis (SIA) system equipped with a thin-layer electrochemical flow cell and permanent magnet, which was used to fix 3,5,6-trichloro-2-pyridinol (TCP) antibody coated magnetic beads (TCP-Ab-MBs) in the reaction zone. After competitive immunoreactions among TCP-Ab-MBs, TCP analyte, and horseradish peroxidase (HRP) labeled TCP, a 3, 3?, 5, 5?-tetramethylbenzidine dihydrochloride and hydrogen peroxide (TMB-H2O2) substrate solution was injected to produce an electroactive enzymatic product. The activity of HRP tracers was monitored by a square wave voltammetric scanning electroactive enzymatic product in the thin-layer flow cell. The voltammetric characteristics of the substrate and the enzymatic product were investigated under batch conditions, and the parameters of the immunoassay were optimized in the SIA system. Under the optimal conditions, the system was used to measure as low as 6 ng L-1 (ppt) TCP, which is around 50-fold lower than the value indicated by the manufacturer of the TCP RaPID Assay? kit (0.25 ug/L, colorimetric detection). The performance of the developed immunoassay system was successfully evaluated on tap water and river water samples spiked with TCP. This technique could be readily used for detecting other environmental contaminants by developing specific antibodies against contaminants and is expected to open new opportunities for environmental and biological monitoring.

  5. Field orientation effects during 5. 6-GHz radiofrequency irradiation of rats

    SciTech Connect

    Frei, M.R.; Jauchem, J.R.; Price, D.L.; Padilla, J.M. )

    1990-12-01

    Ketamine-anesthetized Sprague-Dawley rats were exposed in E and H orientations (long axis parallel to electric and magnetic fields, respectively) to far-field 5.6-GHz continuous-wave radio-frequency radiation (RFR). Power densities were used that resulted in equivalent whole-body average specific absorption rates of 14 W/kg in both orientations (90 mW/cm2 for E and 66 mW/cm2 for H). Irradiation was conducted to increase colonic temperature by 1 degree C (from 38.5 to 39.5 degrees C). During experimentation, arterial blood pressure and respiratory rate and colonic, tympanic, left and right subcutaneous (sides toward and away from RFR source), and tail temperatures were continuously recorded. Results showed no significant difference in the times required to cause a 1 degree C increase or to recover to the initial temperature when irradiation was stopped. Significant differences between E- and H-orientation exposure were seen in the patterns of localized heating. The tail and left subcutaneous temperature increases were significantly greater during E-orientation exposure, the tympanic site showed no difference, and the right subcutaneous temperature increase was significantly greater during H-orientation exposure. Under both exposure conditions, heart rate and mean arterial blood pressure significantly increased during irradiation; however, there were no significant differences between E and H orientation responses. These findings at 5.6 GHz are in contrast to the significant cardiovascular response differences between E- and H-orientation exposure noted during a previous study of irradiation at 2.45 GHz.

  6. Teleportation of entanglement over 143 km.

    PubMed

    Herbst, Thomas; Scheidl, Thomas; Fink, Matthias; Handsteiner, Johannes; Wittmann, Bernhard; Ursin, Rupert; Zeilinger, Anton

    2015-11-17

    As a direct consequence of the no-cloning theorem, the deterministic amplification as in classical communication is impossible for unknown quantum states. This calls for more advanced techniques in a future global quantum network, e.g., for cloud quantum computing. A unique solution is the teleportation of an entangled state, i.e., entanglement swapping, representing the central resource to relay entanglement between distant nodes. Together with entanglement purification and a quantum memory it constitutes a so-called quantum repeater. Since the aforementioned building blocks have been individually demonstrated in laboratory setups only, the applicability of the required technology in real-world scenarios remained to be proven. Here we present a free-space entanglement-swapping experiment between the Canary Islands of La Palma and Tenerife, verifying the presence of quantum entanglement between two previously independent photons separated by 143 km. We obtained an expectation value for the entanglement-witness operator, more than 6 SDs beyond the classical limit. By consecutive generation of the two required photon pairs and space-like separation of the relevant measurement events, we also showed the feasibility of the swapping protocol in a long-distance scenario, where the independence of the nodes is highly demanded. Because our results already allow for efficient implementation of entanglement purification, we anticipate our research to lay the ground for a fully fledged quantum repeater over a realistic high-loss and even turbulent quantum channel. PMID:26578764

  7. Teleportation of entanglement over 143 km

    PubMed Central

    Herbst, Thomas; Scheidl, Thomas; Fink, Matthias; Handsteiner, Johannes; Wittmann, Bernhard; Ursin, Rupert; Zeilinger, Anton

    2015-01-01

    As a direct consequence of the no-cloning theorem, the deterministic amplification as in classical communication is impossible for unknown quantum states. This calls for more advanced techniques in a future global quantum network, e.g., for cloud quantum computing. A unique solution is the teleportation of an entangled state, i.e., entanglement swapping, representing the central resource to relay entanglement between distant nodes. Together with entanglement purification and a quantum memory it constitutes a so-called quantum repeater. Since the aforementioned building blocks have been individually demonstrated in laboratory setups only, the applicability of the required technology in real-world scenarios remained to be proven. Here we present a free-space entanglement-swapping experiment between the Canary Islands of La Palma and Tenerife, verifying the presence of quantum entanglement between two previously independent photons separated by 143 km. We obtained an expectation value for the entanglement-witness operator, more than 6 SDs beyond the classical limit. By consecutive generation of the two required photon pairs and space-like separation of the relevant measurement events, we also showed the feasibility of the swapping protocol in a long-distance scenario, where the independence of the nodes is highly demanded. Because our results already allow for efficient implementation of entanglement purification, we anticipate our research to lay the ground for a fully fledged quantum repeater over a realistic high-loss and even turbulent quantum channel. PMID:26578764

  8. Cloud Thickness from Offbeam Returns - Thor Lidar

    NASA Technical Reports Server (NTRS)

    Cahalan, R.; Kolasinski, J.; McGill, M.; Lau, William K. M. (Technical Monitor)

    2002-01-01

    Physical thickness of a cloud layer, and sometimes multiple cloud layers, can be estimated from the time delay of off-beam returns from a pulsed laser source illuminating one side of the cloud layer. In particular, the time delay of light returning from the outer diffuse halo of light surrounding the beam entry point, relative to the time delay at beam center, determines the cloud physical thickness. The delay combined with the pulse stretch gives the optical thickness. The halo method works best for thick cloud layers, typically optical thickness exceeding 2, and thus compliments conventional lidar which cannot penetrate thick clouds. Cloud layer top and base have been measured independently over the ARM/SGP site using conventional laser ranging (lidar) and the top minus base thickness are compared with a cloud top halo estimate obtained from the NASA/Goddard THOR System (THOR = THickness from Offbeam Returns). THOR flies on the NASA P3, and measures the halo timings from several km above cloud top, at the same time providing conventional lidar cloud top height. The ARM/SGP micropulse lidar provides cloud base height for validation.

  9. Reliability and Validity of "Parents' Evaluation of Responsible Behaviors of 5-6 Year Old Children" Scale

    ERIC Educational Resources Information Center

    Polat, Ozgul; Dagal, Asude B.

    2013-01-01

    This study is aimed at developing a scale (Parents' Evaluation of Responsible Behaviors of 5-6 Year Old Children) for measuring parents' evaluation of their 5-6 year-old children's responsible behaviors. The construct validity of the scale was tested by Factor Analysis. Factor analysis determined that the scale can be clustered under 10 factors.…

  10. EVALUATION OF IMMUNOASSAY METHODS FOR DETERMINATION OF 3,5,6-TRICHLORO-2-PYRIDINOL IN MULTIPLE SAMPLE MEDIA

    EPA Science Inventory

    Two enzyme-linked immunosorbent assay (ELISA) methods were evaluated for the determination of 3,5,6-trichloro-2-pyridinol (3,5,6-TCP) in multiple sample media (dust, soil, food, and urine). The dust and soil samples were analyzed by the RaPID (TM) commercial immunoassay testing ...

  11. 17 CFR 5.6 - Maintenance of minimum financial requirements by retail foreign exchange dealers and futures...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... engaging in retail forex transactions. 5.6 Section 5.6 Commodity and Securities Exchanges COMMODITY FUTURES... forex transactions. (a) Each futures commission merchant offering or engaging in retail forex... engage in retail forex transactions and each person registered as a retail foreign exchange dealer or...

  12. 17 CFR 5.6 - Maintenance of minimum financial requirements by retail foreign exchange dealers and futures...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... engaging in retail forex transactions. 5.6 Section 5.6 Commodity and Securities Exchanges COMMODITY FUTURES... forex transactions. (a) Each futures commission merchant offering or engaging in retail forex... engage in retail forex transactions and each person registered as a retail foreign exchange dealer or...

  13. 17 CFR 5.6 - Maintenance of minimum financial requirements by retail foreign exchange dealers and futures...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... engaging in retail forex transactions. 5.6 Section 5.6 Commodity and Securities Exchanges COMMODITY FUTURES... forex transactions. (a) Each futures commission merchant offering or engaging in retail forex... engage in retail forex transactions and each person registered as a retail foreign exchange dealer or...

  14. 17 CFR 5.6 - Maintenance of minimum financial requirements by retail foreign exchange dealers and futures...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... engaging in retail forex transactions. 5.6 Section 5.6 Commodity and Securities Exchanges COMMODITY FUTURES... forex transactions. (a) Each futures commission merchant offering or engaging in retail forex... engage in retail forex transactions and each person registered as a retail foreign exchange dealer or...

  15. Thickness of the magnetic crust of Mars

    NASA Astrophysics Data System (ADS)

    Voorhies, Coerte V.

    2008-04-01

    To estimate the thickness of the magnetic crust of Mars, six observational magnetic spectra are fitted with the theoretical spectrum expected from a novel, bimodal distribution of magnetic sources. Observational spectra differ, for each comes from a different map or model of variously selected and analyzed Mars Global Surveyor Magnetometer/Electron Reflectometer measurements of the vector magnetic field around Mars. The new theoretical spectrum represents fields from both compact sources and extended, laterally correlated sources on a spherical shell, so the estimated shell depth can now be doubled to obtain layer thickness. This typical magnetic crustal thickness is put at 47.8 +/- 8.4 km. The extensive sources are enormous, typically 650 km across, and account for over half the magnetic energy at low degrees. There is some indication that these sources are relatively shallow, but the typical area remains about 330,000 km2. Granted such extended sources represent magnetization of Mars' ancient crust in a core source field dominated by a reversing, areocentric paleodipole, each one arguably formed during a single polarity chron. How did such vast regions of magnetic crust form? A survey of many eligible mechanisms suggests magnetization of cooling igneous rock at minimal rates of about 1 to 0.1 km3/a during superchrons of order 15 to 150 Ma long.

  16. Peregrine 100-km Sounding Rocket Project

    NASA Technical Reports Server (NTRS)

    Zilliac, Gregory

    2012-01-01

    The Peregrine Sounding Rocket Program is a joint basic research program of NASA Ames Research Center, NASA Wallops, Stanford University, and the Space Propulsion Group, Inc. (SPG). The goal is to determine the applicability of this technology to a small launch system. The approach is to design, build, and fly a stable, efficient liquefying fuel hybrid rocket vehicle to an altitude of 100 km. The program was kicked off in October of 2006 and has seen considerable progress in the subsequent 18 months. This research group began studying liquifying hybrid rocket fuel technology more than a decade ago. The overall goal of the research was to gain a better understanding of the fundamental physics of the liquid layer entrainment process responsible for the large increase in regression rate observed in these fuels, and to demonstrate the effect of increased regression rate on hybrid rocket motor performance. At the time of this reporting, more than 400 motor tests were conducted with a variety of oxidizers (N2O, GOx, LOx) at ever increasing scales with thrust levels from 5 to over 15,000 pounds (22 N to over 66 kN) in order to move this technology from the laboratory to practical applications. The Peregrine program is the natural next step in this development. A number of small sounding rockets with diameters of 3, 4, and 6 in. (7.6, 10.2, and 15.2 cm) have been flown, but Peregrine at a diameter of 15 in. (38.1 cm) and 14,000-lb (62.3-kN) thrust is by far the largest system ever attempted and will be one of the largest hybrids ever flown. Successful Peregrine flights will set the stage for a wide range of applications of this technology.

  17. Crustal-thickness variations in the central Andes

    SciTech Connect

    Beck, S.L.; Myers, S.C.; Wallace, T.C.; Zandt, G. |; Silver, P.G.; Drake, L.

    1996-05-01

    We estimated the crustal thickness along an east-west transect across the Andes at lat 20{degree}S and along a north-south transect along the eastern edge of the Altiplano from data recorded on two arrays of portable broadband seismic stations (BANJO and SEDA). We found crustal-thickness variations of nearly 40 km across the Andes. Maximum crustal thicknesses of 70-74 km under the Western Cordillera and the Eastern Cordillera thin to 32-38 km 200 km east of the Andes in the Chaco Plain. The central Altiplano at 20{degree}S has crustal thicknesses of 60 to 65 km. The crust also appears to thicken from north (16{degree}S, 55-60 km) to south (20{degree}S, 70-74 km) along the Eastern Cordillera. The Subandean zone crust has intermediate thicknesses of 43 to 47 km. Crustal-thickness predictions for the Andes based on Airy-type isostatic behavior show remarkable overall correlation with observed crustal thickness in the regions of high elevation. In contrast, at the boundary between the Eastern Cordillera and the Subandean zone and in the Chaco Plain, the crust is thinner than predicted, suggesting that the crust in these regions is supported in part by the flexural rigidity of a strong lithosphere. With additional constraints, we conclude that the observation of Airy-type isostasy is consistent with thickening associated with compressional shortening of a weak lithosphere squeezed between the stronger lithosphere of the subducting Nazca plate and the cratonic lithosphere of the Brazilian craton. 26 refs., 4 figs.

  18. Predicting gravity and sediment thickness in Afghanistan

    NASA Astrophysics Data System (ADS)

    Jung, W.; Brozena, J.; Peters, M.

    2013-02-01

    The US Naval Research Laboratory conducted comprehensive high-altitude (7 km above mean sea level) aero-geophysical surveys over Afghanistan in 2006 (Rampant Lion I). The surveys were done in collaboration with the US Geological Survey and upon the request of Islamic Republic of Afghanistan Ministry of Mines. In this study, we show that a best fitting admittance between topography and airborne gravity in western Afghanistan can be used to predict airborne gravity for the no-data area of eastern Afghanistan where the mountains are too high to conduct airborne surveys, due to the threat of ground fire. The differences between the airborne and the predicted gravity along a tie-track through the no-data area were found to be within ±12 mGal range with rms difference 7.3 mGal, while those between the predicted gravity from a simple Airy model (with compensation depth of 32 km and crustal density of 2.67 g cm-3) and the airborne gravity were within ±22 mGal range with rms difference 10.3 mGal. A combined airborne free-air anomaly has been constructed by merging the predicted gravity with the airborne data. We also demonstrate that sediment thickness can be estimated for basin areas where surface topography and airborne free-air anomaly profiles do not show a correlation presumably because of thick sediments. In order to estimate sediment thickness, we first determine a simple linear relationship from a scatter plot of the airborne gravity points and the interpolated Shuttle Radar Topography Mission (SRTM) topography along the Rampant Lion I tracks, and computed corresponding quasi-topography tracks by multiplying the linear relationship with the airborne free-air anomalies. We then take the differences between the SRTM and quasi-topography as a first-order estimate of sediment thickness. A global gravity model (GOCO02S), upward continued to the same altitude (7 km above mean sea level) as the data collection, was compared with the low-pass filtered (with cutoff

  19. Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

    NASA Astrophysics Data System (ADS)

    Howard, Keith A.; Foster, David A.

    1996-01-01

    We estimate here a geothermal gradient of only 17 ± 5°C km-1 for the tilted Grayback fault block in southeastern Arizona when extension began ˜25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90° during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220°-240°C isotherm migrated downward 5-6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ˜83 Ma in the structurally highest crystalline rocks to ˜24 Ma at ˜6-km paleodepth and then to ˜15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ˜5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ˜25 Ma. At that time the 110 ± 10°C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ˜5.7 km, and the 220 ± 30°C isotherm as estimated from zircon data resided at a pretilting basement depth of ˜12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ± 5°C km-1. From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ˜1 km m.y.-1.

  20. Corneal thickness in glaucoma.

    PubMed

    De Cevallos, E; Dohlman, C H; Reinhart, W J

    1976-02-01

    The central corneal stromal thickness of patients with open angle glaucoma, secondary glaucoma (the majority aphakic), or a history of unilateral acute angle closure glaucoma were measured and compared with the stromal thickness of a group of normal patients. In open angle glaucoma, there was a small but significant increase in the average stromal thickness. This thickness increase was, in all likelihood, due to an abnormal function of the endothelium in this disease since the level of the intraocular pressure did not seem to be a factor. There was no correlation between stromal thickness and duration of the glaucoma or type of anti-glaucomatous medication. Most cases of secondary glaucome, controlled medically or not, had markedly increased corneal thickness, again, most likely, due to endothelial damage rather than to level of intraocular pressure. After an angle closure attack, permanent damage to the cornea was found to be rare. PMID:1247273

  1. Lead Thickness Measurements

    SciTech Connect

    Rucinski, R.; /Fermilab

    1998-02-16

    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in{sup 3}, an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  2. Essential Roles of the Smc5/6 Complex in Replication through Natural Pausing Sites and Endogenous DNA Damage Tolerance.

    PubMed

    Menolfi, Demis; Delamarre, Axel; Lengronne, Armelle; Pasero, Philippe; Branzei, Dana

    2015-12-17

    The essential functions of the conserved Smc5/6 complex remain elusive. To uncover its roles in genome maintenance, we established Saccharomyces cerevisiae cell-cycle-regulated alleles that enable restriction of Smc5/6 components to S or G2/M. Unexpectedly, the essential functions of Smc5/6 segregated fully and selectively to G2/M. Genetic screens that became possible with generated alleles identified processes that crucially rely on Smc5/6 specifically in G2/M: metabolism of DNA recombination structures triggered by endogenous replication stress, and replication through natural pausing sites located in late-replicating regions. In the first process, Smc5/6 modulates remodeling of recombination intermediates, cooperating with dissolution activities. In the second, Smc5/6 prevents chromosome fragility and toxic recombination instigated by prolonged pausing and the fork protection complex, Tof1-Csm3. Our results thus dissect Smc5/6 essential roles and reveal that combined defects in DNA damage tolerance and pausing site-replication cause recombination-mediated DNA lesions, which we propose to drive developmental and cancer-prone disorders. PMID:26698660

  3. Smc5/6 Coordinates Formation and Resolution of Joint Molecules with Chromosome Morphology to Ensure Meiotic Divisions

    PubMed Central

    Blitzblau, Hannah G.; Newcombe, Sonya; Chan, Andrew Chi-ho; Newnham, Louise; Li, Zhaobo; Gray, Stephen; Herbert, Alex D.; Arumugam, Prakash; Hochwagen, Andreas; Hunter, Neil; Hoffmann, Eva

    2013-01-01

    During meiosis, Structural Maintenance of Chromosome (SMC) complexes underpin two fundamental features of meiosis: homologous recombination and chromosome segregation. While meiotic functions of the cohesin and condensin complexes have been delineated, the role of the third SMC complex, Smc5/6, remains enigmatic. Here we identify specific, essential meiotic functions for the Smc5/6 complex in homologous recombination and the regulation of cohesin. We show that Smc5/6 is enriched at centromeres and cohesin-association sites where it regulates sister-chromatid cohesion and the timely removal of cohesin from chromosomal arms, respectively. Smc5/6 also localizes to recombination hotspots, where it promotes normal formation and resolution of a subset of joint-molecule intermediates. In this regard, Smc5/6 functions independently of the major crossover pathway defined by the MutLγ complex. Furthermore, we show that Smc5/6 is required for stable chromosomal localization of the XPF-family endonuclease, Mus81-Mms4Eme1. Our data suggest that the Smc5/6 complex is required for specific recombination and chromosomal processes throughout meiosis and that in its absence, attempts at cell division with unresolved joint molecules and residual cohesin lead to severe recombination-induced meiotic catastrophe. PMID:24385939

  4. Regulation of Ins(3,4,5,6)P(4) signaling by a reversible kinase/phosphatase.

    PubMed

    Ho, Melisa W Y; Yang, Xiaonian; Carew, Mark A; Zhang, Tong; Hua, Len; Kwon, Yong-Uk; Chung, Sung-Kee; Adelt, Stephan; Vogel, Günter; Riley, Andrew M; Potter, Barry V L; Shears, Stephen B

    2002-03-19

    Regulation of Cl(-) channel conductance by Ins(3,4,5,6)P(4) provides receptor-dependent control over salt and fluid secretion, cell volume homeostasis, and electrical excitability of neurones and smooth muscle. Ignorance of how Ins(3,4,5,6)P(4) is synthesized has long hindered our understanding of this signaling pathway. We now show Ins(3,4,5,6)P(4) synthesis by Ins(1,3,4,5,6)P(5) 1-phosphatase activity by an enzyme previously characterized as an Ins(3,4,5,6)P(4) 1-kinase. Rationalization of these phenomena with a ligand binding model unveils Ins(1,3,4)P(3) as not simply an alternative kinase substrate, but also an activator of Ins(1,3,4,5,6)P(5) 1-phosphatase. Stable overexpression of the enzyme in epithelial monolayers verifies its physiological role in elevating Ins(3,4,5,6)P(4) levels and inhibiting secretion. It is exceptional for a single enzyme to catalyze two opposing signaling reactions (1-kinase/1-phosphatase) under physiological conditions. Reciprocal coordination of these opposing reactions offers an alternative to general doctrine that intracellular signals are regulated by integrating multiple, distinct phosphatases and kinases. PMID:11909533

  5. Smc5/6 Is a Telomere-Associated Complex that Regulates Sir4 Binding and TPE

    PubMed Central

    Chartrand, Pascal; Cobb, Jennifer A.

    2016-01-01

    SMC proteins constitute the core members of the Smc5/6, cohesin and condensin complexes. We demonstrate that Smc5/6 is present at telomeres throughout the cell cycle and its association with chromosome ends is dependent on Nse3, a subcomponent of the complex. Cells harboring a temperature sensitive mutant, nse3-1, are defective in Smc5/6 localization to telomeres and have slightly shorter telomeres. Nse3 interacts physically and genetically with two Rap1-binding factors, Rif2 and Sir4. Reduction in telomere-associated Smc5/6 leads to defects in telomere clustering, dispersion of the silencing factor, Sir4, and a loss in transcriptional repression for sub-telomeric genes and non-coding telomeric repeat-containing RNA (TERRA). SIR4 recovery at telomeres is reduced in cells lacking Smc5/6 functionality and vice versa. However, nse3-1/ sir4 Δ double mutants show additive defects for telomere shortening and TPE indicating the contribution of Smc5/6 to telomere homeostasis is only in partial overlap with SIR factor silencing. These findings support a role for Smc5/6 in telomere maintenance that is separate from its canonical role(s) in HR-mediated events during replication and telomere elongation. PMID:27564449

  6. Smc5/6 Is a Telomere-Associated Complex that Regulates Sir4 Binding and TPE.

    PubMed

    Moradi-Fard, Sarah; Sarthi, Jessica; Tittel-Elmer, Mireille; Lalonde, Maxime; Cusanelli, Emilio; Chartrand, Pascal; Cobb, Jennifer A

    2016-08-01

    SMC proteins constitute the core members of the Smc5/6, cohesin and condensin complexes. We demonstrate that Smc5/6 is present at telomeres throughout the cell cycle and its association with chromosome ends is dependent on Nse3, a subcomponent of the complex. Cells harboring a temperature sensitive mutant, nse3-1, are defective in Smc5/6 localization to telomeres and have slightly shorter telomeres. Nse3 interacts physically and genetically with two Rap1-binding factors, Rif2 and Sir4. Reduction in telomere-associated Smc5/6 leads to defects in telomere clustering, dispersion of the silencing factor, Sir4, and a loss in transcriptional repression for sub-telomeric genes and non-coding telomeric repeat-containing RNA (TERRA). SIR4 recovery at telomeres is reduced in cells lacking Smc5/6 functionality and vice versa. However, nse3-1/ sir4 Δ double mutants show additive defects for telomere shortening and TPE indicating the contribution of Smc5/6 to telomere homeostasis is only in partial overlap with SIR factor silencing. These findings support a role for Smc5/6 in telomere maintenance that is separate from its canonical role(s) in HR-mediated events during replication and telomere elongation. PMID:27564449

  7. All-cis 1,2,3,4,5,6-hexafluorocyclohexane is a facially polarized cyclohexane

    NASA Astrophysics Data System (ADS)

    Keddie, Neil S.; Slawin, Alexandra M. Z.; Lebl, Tomas; Philp, Douglas; O'Hagan, David

    2015-06-01

    The highest-energy stereoisomer of 1,2,3,4,5,6-hexafluorocyclohexane, in which all of the fluorines are ‘up’, is prepared in a 12-step protocol. The molecule adopts a classic chair conformation with alternate C-F bonds aligned triaxially, clustering three highly electronegative fluorine atoms in close proximity. This generates a cyclohexane with a high molecular dipole (μ = 6.2 D), unusual in an otherwise aliphatic compound. X-ray analysis indicates that the intramolecular Fax···Fax distances (˜2.77 Å) are longer than the vicinal Fax···Feq­ distances (˜2.73 Å) suggesting a tension stabilizing the chair conformation. In the solid state the molecules pack in an orientation consistent with electrostatic ordering. Our synthesis of this highest-energy isomer demonstrates the properties that accompany the placement of axial fluorines on a cyclohexane and the unusual property of a facially polarized ring in organic chemistry. Derivatives have potential as new motifs for the design of functional organic molecules or for applications in supramolecular chemistry design.

  8. Reactions of organyl and silyl alanes with 1,3,4,5,6-pentamethyl-2-aminoborazine.

    PubMed

    Fan, Maomin; Duesler, Eileen N; Nöth, Heinrich; Paine, Robert T

    2010-03-15

    The reactions of (Me(3)Si)(3)Al, Me(3)Al, Et(3)Al, and i-Bu(3)Al with 1,3,4,5,6-pentamethyl-2-aminoborazine have been examined. An amine alane adduct (Me(3)Si)(3)Al.NH(2)B(3)(Me)(2)N(3)Me(3) (1) and several elimination products [(Me(3)Si)(2)AlN(H)B(3)(Me)(2)N(3)Me(3)](2) (2), [(Me(3)SiAl)(4)(Me(3)SiN)(3)NH] (3), [Me(2)AlN(H) B(3)(Me)(2)N(3)Me(3)](2) (4), [Et(2)AlN(H) B(3)(Me)(2)N(3)Me(3)](2) (5), and [i-Bu(2)AlN(H) B(3)(Me)(2)N(3)Me(3)](2) (6) have been isolated. Compounds 1, 2, 4-6 have been spectroscopically characterized, and single crystal X-ray diffraction structure determinations have been completed for 1-4 and 6. The molecular chemistry provides insight into the reaction of Me(3)Al and 1,3,5-N-trimethyl-2,4,6-B-triaminoborazine that, upon pyrolysis, produces AlN/BN composite ceramic materials. PMID:20158196

  9. Brazilian Red Propolis Attenuates Hypertension and Renal Damage in 5/6 Renal Ablation Model

    PubMed Central

    Teles, Flávio; da Silva, Tarcilo Machado; da Cruz Júnior, Francisco Pessoa; Honorato, Vitor Hugo; de Oliveira Costa, Henrique; Barbosa, Ana Paula Fernandes; de Oliveira, Sabrina Gomes; Porfírio, Zenaldo; Libório, Alexandre Braga; Borges, Raquel Lerner; Fanelli, Camilla

    2015-01-01

    The pathogenic role of inflammation and oxidative stress in chronic kidney disease (CKD) is well known. Anti-inflammatories and antioxidant drugs has demonstrated significant renoprotection in experimental nephropathies. Moreover, the inclusion of natural antioxidants derived from food and herbal extracts (such as polyphenols, curcumin and lycopene) as an adjuvant therapy for slowing CKD progression has been largely tested. Brazilian propolis is a honeybee product, whose anti-inflammatory, antimicrobial and antioxidant effects have been widely shown in models of sepsis, cancer, skin irritation and liver fibrosis. Furthermore, previous studies demonstrated that this compound promotes vasodilation and reduces hypertension. However, potential renoprotective effects of propolis in CKD have never been investigated. The aim of this study was to evaluate the effects of a subtype of Brazilian propolis, the Red Propolis (RP), in the 5/6 renal ablation model (Nx). Adult male Wistar rats underwent Nx and were divided into untreated (Nx) and RP-treated (Nx+RP) groups, after 30 days of surgery; when rats already exhibited marked hypertension and proteinuria. Animals were observed for 90 days from the surgery day, when Nx+RP group showed significant reduction of hypertension, proteinuria, serum creatinine retention, glomerulosclerosis, renal macrophage infiltration and oxidative stress, compared to age-matched untreated Nx rats, which worsened progressively over time. In conclusion, RP treatment attenuated hypertension and structural renal damage in Nx model. Reduction of renal inflammation and oxidative stress could be a plausible mechanism to explain this renoprotection. PMID:25607548

  10. Intracellular localization of human Ins(1,3,4,5,6)P5 2-kinase

    PubMed Central

    Brehm, Maria A.; Schenk, Tobias M. H.; Zhou, Xuefei; Fanick, Werner; Lin, Hongying; Windhorst, Sabine; Nalaskowski, Marcus M.; Kobras, Mario; Shears, Stephen B.; Mayr, Georg W.

    2007-01-01

    InsP6 is an intracellular signal with several proposed functions that is synthesized by IP5K [Ins(1,3,4,5,6)P5 2-kinase]. In the present study, we overexpressed EGFP (enhanced green fluorescent protein)–IP5K fusion proteins in NRK (normal rat kidney), COS7 and H1299 cells. The results indicate that there is spatial microheterogeneity in the intracellular localization of IP5K that could also be confirmed for the endogenous enzyme. This may facilitate changes in InsP6 levels at its sites of action. For example, overexpressed IP5K showed a structured organization within the nucleus. The kinase was preferentially localized in euchromatin and nucleoli, and co-localized with mRNA. In the cytoplasm, the overexpressed IP5K showed locally high concentrations in discrete foci. The latter were attributed to stress granules by using mRNA, PABP [poly(A)-binding protein] and TIAR (TIA-1-related protein) as markers. The incidence of stress granules, in which IP5K remained highly concentrated, was further increased by puromycin treatment. Using FRAP (fluorescence recovery after photobleaching) we established that IP5K was actively transported into the nucleus. By site-directed mutagenesis we identified a nuclear import signal and a peptide segment mediating the nuclear export of IP5K. PMID:17705785

  11. DNA binding studies of 3, 5, 6-trichloro-2-pyridinol pesticide metabolite.

    PubMed

    Kashanian, Soheila; Shariati, Zohreh; Roshanfekr, Hamideh; Ghobadi, Sirous

    2012-07-01

    3, 5, 6-Trichloro-2-pyridinol (TCP) is a stable metabolite of two major pesticides, Chlopyrifos insecticide and Triclopyr herbicide, which are widely used in the world. The potential health hazard associated with TCP is identified due to its high affinity to the DNA molecule. Therefore, in this study, the interaction of native calf thymus DNA with TCP has been investigated using spectrophotometric, circular dichroism (CD), spectrofluorometric, viscometric and voltametric techniques. It was found that TCP molecules could interact with DNA via a groove-binding mode, as evidenced by hyperchromism, with no red shift in the UV absorption band of TCP, no changes in K(b) values in the presence of salt, no significant changes in the specific viscosity and CD spectra of DNA, and a decrease in peak currents with no shift in the voltamogram. In addition, TCP is able to release Hoechst 33258, a strong groove binder, in the DNA solutions. The results are indicative of the groove-binding mode of TCP to DNA. PMID:22519761

  12. Fe L-shell lines from n (n=4, 5, 6) to 2 transitions

    NASA Astrophysics Data System (ADS)

    Chen, H.; Beiersdorfer, P.; Brown, G.; Behar, E.

    2003-03-01

    Fe L-shell emission lines at wavelengths less than 10 angstroms come from n (n great than 3) to 2 transitions. These lines embed information such as electron density and temperature that is of fundamental importance to understanding the physics of astrophysical objects. Unresolved by previous x-ray observatories, these low wavelength Fe lines are clearly observable by Chandra and XMM x-ray satellites. To meet the needs of using these lines as diagnostics, we have studied the n to 2 transitions (n = 4, 5, 6) Fe L-shell lines using the atomic codes HULLAC and FAC. Using the LLNL electron beam ion trap, we also made laboratory measurements for this wavelength region, following the success of our Fe L-shell emission lines for the 3-2 transitions (Brown et al, APJ supp. 2002). Our measurements and their comparison with code simulations will be reported, together with a discussion of the possible use of these low wavelength lines as diagnostics for astrophysics. This work was performed under the auspices of the U.S. DOE by LLNL under contract No. W-7405-Eng-48 and supported by NASA SARA grants to LLNL, GSFC, and Columbia University.

  13. Endothelial cell transfusion ameliorates endothelial dysfunction in 5/6 nephrectomized rats

    PubMed Central

    Pacurari, Maricica; Xing, Dongqi; Hilgers, Rob H. P.; Guo, Yuan Yuan; Yang, Zhengqin

    2013-01-01

    Endothelial dysfunction is prevalent in chronic kidney disease. This study tested the hypothesis that transfusion of rat aortic endothelial cells (ECs) ameliorates endothelial dysfunction in a rat model of chronic kidney disease. Male Sprague-Dawley rats underwent sham surgery or 5/6 nephrectomy (Nx). Five weeks after Nx, EC (1.5 × 106 cells/rat) or vehicle were transfused intravenously. One week later, vascular reactivity of mesenteric artery was assessed on a wire myograph. Sensitivity of endothelium-dependent relaxation to acetylcholine and maximum vasodilation were impaired by Nx and improved by EC transfusion. Using selective pharmacological nitric oxide synthase isoform inhibitors, we demonstrated that the negative effect of Nx on endothelial function and rescue by EC transfusion are, at least in part, endothelial nitric oxide synthase mediated. Plasma asymmetric dimethylarginine was increased by Nx and decreased by EC transfusion, whereas mRNA expression of dimethylarginine dimethylaminohydrolases 1 (DDAH1) was decreased by Nx and restored by EC transfusion. Immunohistochemical staining confirmed that local expression of DDAH1 is decreased by Nx and increased by EC transfusion. In conclusion, EC transfusion attenuates Nx-induced endothelium-dependent vascular dysfunction by regulating DDAH1 expression and enhancing endothelial nitric oxide synthase activity. These results suggest that EC-based therapy could provide a novel therapeutic strategy to improve vascular function in chronic kidney disease. PMID:23955716

  14. High antiallergic activity of 5,6,4'-trihydroxy-7,8,3'-trimethoxyflavone and 5,6-dihydroxy-7,8,3',4'-tetramethoxyflavone from eau de cologne mint (Mentha×piperita citrata).

    PubMed

    Sato, Akihiko; Tamura, Hirotoshi

    2015-04-01

    The following compounds with higher antiallergic activities were isolated from eau de cologne mint leaves: 5,6,4'-trihydroxy-7,8-dimethoxyflavone (6), 5,6,4'-trihydroxy-7,8,3'-trimethoxyflavone (7), 5,6-dihydroxy-7,3',4'-trimethoxyflavone (8), 5,6-dihydroxy-7,8,3',4'-tetramethoxyflavone (9), and 5,6-dihydroxy-7,8,4'-trimethoxyflavone (10). The IC50 values of compounds 6-10 against RBL-2H3 cells were 6.7, 2.4, 5.6, 3.0, and 6.1μM. Compounds 7 and 9 (IC50 2.4μM and 3.0μM) had the highest antiallergic activities among the flavonoids previously reported. The amounts of 7, 9, and 10 isolated were fairly high, at 177.7mg/kg, 278.0mg/kg, and 179.7mg/kg in the mint, respectively. LD5 value (index of toxicity) and LD5/IC50 ratio of 7 and 9 indicate that the safety is greater than that of luteolin, a typical antiallergic substance. The extract containing powerful antiallergic flavones, 6-10 with higher hydrophobicity could be selectively separated from the extract containing luteolin and other flavonoid glycosides by partition with dichloromethane and water. Therefore, compounds 7 and 9 in mint, and the dichloromethane extract would be the most potent and preventive resources against type I allergy. PMID:25704366

  15. Interpreting human behavior from depositional rates and combustion features through the study of sedimentary microfacies at site Pinnacle Point 5-6, South Africa.

    PubMed

    Karkanas, Panagiotis; Brown, Kyle S; Fisher, Erich C; Jacobs, Zenobia; Marean, Curtis W

    2015-08-01

    Using fine and coarse resolution geoarchaeological studies at the Middle Stone Age site of PP5-6 at Pinnacle Point, Mossel Bay, South Africa, we discovered different patterns of anthropogenic input and changes in behavior through time. Through the microfacies approach, we documented the various geogenic and anthropogenic processes that formed the deposits of the site. By deciphering large scale rate differences in the production of these microfacies we estimated anthropogenic input rates and therefore gained understanding of occupational duration and intensity. The PP5-6 sediments document occupations characterized by small groups and short visits during Marine Isotope Stage (MIS) 5. This part of the sequence is characterized by numerous single (and mostly intact) hearth structures in a roofspall-rich matrix. During this time the sea was very close to the site and the people were focused on exploiting the rocky shores. With the advent of the glacial conditions of MIS4, the occupation of the site became much more intense. The occurrence of thick palimpsests of burnt remains, sometimes disturbed by small-scale sedimentary gravity processes, supports this conclusion. As sea level dropped and the coastline retreated, the geogenic input shifted to predominately aeolian sediments, implying an exposed shelf probably associated with a rich but more distant coastal environment. The occupants of PP5-6 turned their preference to silcrete as a raw material and they began to make microlithic stone tools. Since sites dating to MIS4 are abundant in the Cape, we suggest that populations during MIS4 responded to glacial conditions with either demographic stability or growth as well as technological change. PMID:26024567

  16. Thick film hydrogen sensor

    DOEpatents

    Hoffheins, Barbara S.; Lauf, Robert J.

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  17. Thick film hydrogen sensor

    DOEpatents

    Hoffheins, B.S.; Lauf, R.J.

    1995-09-19

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors. 8 figs.

  18. Education and "Thick" Epistemology

    ERIC Educational Resources Information Center

    Kotzee, Ben

    2011-01-01

    In this essay Ben Kotzee addresses the implications of Bernard Williams's distinction between "thick" and "thin" concepts in ethics for epistemology and for education. Kotzee holds that, as in the case of ethics, one may distinguish between "thick" and "thin" concepts of epistemology and, further, that this distinction points to the importance of…

  19. Advanced Gas Reactor (AGR)-5/6/7 Fuel Irradiation Experiments in the Advanced Test Reactor

    SciTech Connect

    A. Joseph Palmer; David A. Petti; S. Blaine Grover

    2014-04-01

    The United States Department of Energy’s Very High Temperature Reactor (VHTR) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which each consist of at least five separate capsules, are being irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gases also have on-line fission product monitoring the effluent from each capsule to track performance of the fuel during irradiation. The first two experiments (designated AGR-1 and AGR-2), have been completed. The third and fourth experiments have been combined into a single experiment designated AGR-3/4, which started its irradiation in December 2011 and is currently scheduled to be completed in April 2014. The design of the fuel qualification experiment, designated AGR-5/6/7, is well underway and incorporates lessons learned from the three previous experiments. Various design issues will be discussed with particular details related to selection of thermometry.

  20. Evaluation of Whipple Bumper shields at 7 and 10 km/s

    NASA Technical Reports Server (NTRS)

    Ang, J. A.; Chhabildas, L. C.; Cour-Palais, B. G.; Christiansen, E. L.; Crews, J. L.

    1992-01-01

    A series of experiments has been performed on the Sandia Hypervelocity Launcher to determine the performance limits of conventional Whipple shields against representative 0.8 g aluminum orbital debris plate-like fragments with velocities of 7 and 10 km/s. Supporting diagnostics include flash X-rays, high speed photography and transient digitizers for timing correlation. Two Whipple shield designs were tested with either a 0.030 cm or a 0.127 cm thick front sheet and a 0.407 cm thick backsheet separated by 30.5 cm. These two designs bracket the ballistic penetration limit curve for protection against these debris simulants for 7 km/s impacts.

  1. Chromatin association of the SMC5/6 complex is dependent on binding of its NSE3 subunit to DNA

    PubMed Central

    Zabrady, Katerina; Adamus, Marek; Vondrova, Lucie; Liao, Chunyan; Skoupilova, Hana; Novakova, Marketa; Jurcisinova, Lenka; Alt, Aaron; Oliver, Antony W.; Lehmann, Alan R.; Palecek, Jan J.

    2016-01-01

    SMC5/6 is a highly conserved protein complex related to cohesin and condensin, which are the key components of higher-order chromatin structures. The SMC5/6 complex is essential for proliferation in yeast and is involved in replication fork stability and processing. However, the precise mechanism of action of SMC5/6 is not known. Here we present evidence that the NSE1/NSE3/NSE4 sub-complex of SMC5/6 binds to double-stranded DNA without any preference for DNA-replication/recombination intermediates. Mutations of key basic residues within the NSE1/NSE3/NSE4 DNA-binding surface reduce binding to DNA in vitro. Their introduction into the Schizosaccharomyces pombe genome results in cell death or hypersensitivity to DNA damaging agents. Chromatin immunoprecipitation analysis of the hypomorphic nse3 DNA-binding mutant shows a reduced association of fission yeast SMC5/6 with chromatin. Based on our results, we propose a model for loading of the SMC5/6 complex onto the chromatin. PMID:26446992

  2. Chromatin association of the SMC5/6 complex is dependent on binding of its NSE3 subunit to DNA.

    PubMed

    Zabrady, Katerina; Adamus, Marek; Vondrova, Lucie; Liao, Chunyan; Skoupilova, Hana; Novakova, Marketa; Jurcisinova, Lenka; Alt, Aaron; Oliver, Antony W; Lehmann, Alan R; Palecek, Jan J

    2016-02-18

    SMC5/6 is a highly conserved protein complex related to cohesin and condensin, which are the key components of higher-order chromatin structures. The SMC5/6 complex is essential for proliferation in yeast and is involved in replication fork stability and processing. However, the precise mechanism of action of SMC5/6 is not known. Here we present evidence that the NSE1/NSE3/NSE4 sub-complex of SMC5/6 binds to double-stranded DNA without any preference for DNA-replication/recombination intermediates. Mutations of key basic residues within the NSE1/NSE3/NSE4 DNA-binding surface reduce binding to DNA in vitro. Their introduction into the Schizosaccharomyces pombe genome results in cell death or hypersensitivity to DNA damaging agents. Chromatin immunoprecipitation analysis of the hypomorphic nse3 DNA-binding mutant shows a reduced association of fission yeast SMC5/6 with chromatin. Based on our results, we propose a model for loading of the SMC5/6 complex onto the chromatin. PMID:26446992

  3. The crustal thickness of West Antarctica

    NASA Astrophysics Data System (ADS)

    Chaput, J.; Aster, R. C.; Huerta, A.; Sun, X.; Lloyd, A.; Wiens, D.; Nyblade, A.; Anandakrishnan, S.; Winberry, J. P.; Wilson, T.

    2014-01-01

    P-to-S receiver functions (PRFs) from the Polar Earth Observing Network (POLENET) GPS and seismic leg of POLENET spanning West Antarctica and the Transantarctic Mountains deployment of seismographic stations provide new estimates of crustal thickness across West Antarctica, including the West Antarctic Rift System (WARS), Marie Byrd Land (MBL) dome, and the Transantarctic Mountains (TAM) margin. We show that complications arising from ice sheet multiples can be effectively managed and further information concerning low-velocity subglacial sediment thickness may be determined, via top-down utilization of synthetic receiver function models. We combine shallow structure constraints with the response of deeper layers using a regularized Markov chain Monte Carlo methodology to constrain bulk crustal properties. Crustal thickness estimates range from 17.0±4 km at Fishtail Point in the western WARS to 45±5 km at Lonewolf Nunataks in the TAM. Symmetric regions of crustal thinning observed in a transect deployment across the West Antarctic Ice Sheet correlate with deep subice basins, consistent with pure shear crustal necking under past localized extension. Subglacial sediment deposit thicknesses generally correlate with trough/dome expectations, with the thickest inferred subice low-velocity sediment estimated as ˜0.4 km within the Bentley Subglacial Trench. Inverted PRFs from this study and other published crustal estimates are combined with ambient noise surface wave constraints to generate a crustal thickness map for West Antarctica south of 75°S. Observations are consistent with isostatic crustal compensation across the central WARS but indicate significant mantle compensation across the TAM, Ellsworth Block, MBL dome, and eastern and western sectors of thinnest WARS crust, consistent with low density and likely dynamic, low-viscosity high-temperature mantle.

  4. Achievements and Planned Programmes of Activities of The Csg.5/6 "geodynamics of Northern Carpathians"

    NASA Astrophysics Data System (ADS)

    Zablotskyj, F.; Tretyak, K.

    Within the programme of the regional group CSG.5/6 "Geodynamics of Northern Carpathians", the following main lines are carried out. (1) Geodetic and geophysical investigations of the recent crustal movements and geophysical analysis of deep struc- ture on the Carpathian geodynamic test field. (2) Subsequent study of geological struc- tures in the region of Northern Carpathians. On the initiative of the Main Astronomical Observatory, the National Space Agency and the Aerogeodetic Enterprise of Ukraine two permanent GPS stations, UZHL and SULP, were being established during last 1.5 years. The first one is situated in the zone of Transcarpathian flexure (Uzhgorod, University) and the second one - in the west of East-European plate (the Precarpathi- ans, Lviv, Polytechnic University). In addition to the long-term project "Restoration of Ukrainian-Polish complex geophysical station at Pip Ivan Mount in Charnohora (Ukrainian Carpathians)", the following actions are planned for 2002-2004. (1) To carry out the complex geodetic, geophysical, geological and geomorphological in- vestigations in this region, which is less studied in comparison with other areas in Carpathians. The comparison of simultaneous appearance of geophysical processes in these regions will allow detect a degree of influence of endogenic, exogenic, and antro- pogenig factors on present day hydro-geological processes in the whole Carpathian region. (2) To create a network of permanent stations for the complex geophysical and geodynamic monitoring, which will include measurements of intensity of Earth's surface deformation field, remote photogrammetric measurements of intensity of de- structive and shift processes, the determination of parameters of gravity and mag- netic fields, seismic and electrometric measurements, spectral analysis of space im- ages for quality and quantity estimations of technogenic and antropogenic activity, generalization of data on evolution and dynamics of river systems and

  5. Origami of thick panels

    NASA Astrophysics Data System (ADS)

    Chen, Yan; Peng, Rui; You, Zhong

    2015-07-01

    Origami patterns, including the rigid origami patterns in which flat inflexible sheets are joined by creases, are primarily created for zero-thickness sheets. In order to apply them to fold structures such as roofs, solar panels, and space mirrors, for which thickness cannot be disregarded, various methods have been suggested. However, they generally involve adding materials to or offsetting panels away from the idealized sheet without altering the kinematic model used to simulate folding. We develop a comprehensive kinematic synthesis for rigid origami of thick panels that differs from the existing kinematic model but is capable of reproducing motions identical to that of zero-thickness origami. The approach, proven to be effective for typical origami, can be readily applied to fold real engineering structures.

  6. Measuring coal thickness

    NASA Technical Reports Server (NTRS)

    Barker, C.; Blaine, J.; Geller, G.; Robinson, R.; Summers, D.; Tyler, J.

    1980-01-01

    Laboratory tested concept, for measuring thickness of overhead coal using noncontacting sensor system coupled to controller and high pressure water jet, allows mining machines to remove virtually all coal from mine roofs without danger of cutting into overlying rock.

  7. Importance of Corneal Thickness

    MedlinePlus

    ... News About Us Donate In This Section The Importance of Corneal Thickness email Send this article to ... is important because it can mask an accurate reading of eye pressure, causing doctors to treat you ...

  8. MODIS 3km Aerosol Product: Algorithm and Global Perspective

    NASA Technical Reports Server (NTRS)

    Remer, L. A.; Mattoo, S.; Levy, R. C.; Munchak, L.

    2013-01-01

    After more than a decade of producing a nominal 10 km aerosol product based on the dark target method, the MODIS aerosol team will be releasing a nominal 3 km product as part of their Collection 6 release. The new product differs from the original 10 km product only in the manner in which reflectance pixels are ingested, organized and selected by the aerosol algorithm. Overall, the 3 km product closely mirrors the 10 km product. However, the finer resolution product is able to retrieve over ocean closer to islands and coastlines, and is better able to resolve fine aerosol features such as smoke plumes over both ocean and land. In some situations, it provides retrievals over entire regions that the 10 km product barely samples. In situations traditionally difficult for the dark target algorithm, such as over bright or urban surfaces the 3 km product introduces isolated spikes of artificially high aerosol optical depth (AOD) that the 10 km algorithm avoids. Over land, globally, the 3 km product appears to be 0.01 to 0.02 higher than the 10 km product, while over ocean, the 3 km algorithm is retrieving a proportionally greater number of very low aerosol loading situations. Based on collocations with ground-based observations for only six months, expected errors associated with the 3 km land product are determined to be greater than for the 10 km product: 0.05 0.25 AOD. Over ocean, the suggestion is for expected errors to be the same as the 10 km product: 0.03 0.05 AOD. The advantage of the product is on the local scale, which will require continued evaluation not addressed here. Nevertheless, the new 3 km product is expected to provide important information complementary to existing satellite-derived products and become an important tool for the aerosol community.

  9. United States crustal thickness

    NASA Technical Reports Server (NTRS)

    Allenby, R. J.; Schnetzler, C. C.

    1983-01-01

    The thickness of the crust, the thickness of the basal (intermediate or lower) crustal layer, and the average velocity at the top of the mantle have been mapped using all available deep-penetrating seismic-refraction profiles in the conterminous United States and surrounding border areas. These profiles are indexed to their literature data sources. The more significant long wavelength anomalies on the three maps are briefly discussed and analyzed. An attempt to use Bouguer gravity to validate mantle structure was inconclusive.

  10. Synthesis of 5,6-dihydro-4H-benzo[d]isoxazol-7-one and 5,6-dihydro-4H-isoxazolo[5,4-c]pyridin-7-one derivatives as potential Hsp90 inhibitors.

    PubMed

    Musso, Loana; Cincinelli, Raffaella; Giannini, Giuseppe; Manetti, Fabrizio; Dallavalle, Sabrina

    2015-11-01

    A novel class of 5,6-dihydro-4H-benzo[d]isoxazol-7-ones and 5,6-dihydro-4H-isoxazolo[5,4-c]pyridin-7-ones was designed, synthesized, and assayed to investigate the affinity toward Hsp90 protein. The synthetic route was based on a 1,3-dipolar cycloaddition of nitriloxides, generated in situ from suitable benzaldoximes, with 2-bromocyclohex-2-enones or 3-bromo-5,6-dihydro-1H-pyridin-2-ones. Whereas all the compounds bearing a benzamide group on the bicyclic scaffold were devoid of activity, the derivatives carrying a resorcinol-like fragment showed a remarkable inhibitory effect on Hsp90. Docking calculations were performed to investigate the orientation of the new compounds within the binding site of the enzyme. PMID:25855505

  11. Habit modification of 5,6-dimethyl-1H-benzotriazole in the presence of nonionic triblock copolymers

    NASA Astrophysics Data System (ADS)

    Molloy, Meghan R.; Partch, Richard

    2013-06-01

    The effects of different nonionic surfactants on the habit modification of 5,6-dimethyl-1H-benzotriazole (5,6-DMBTA) were evaluated. Three different triblock copolymers, Pluronic® F-127, Pluronic® L44NF, and Pluronic® P-123 were selected as nonionic surfactants. Crystallization was achieved by pH adjustment in an aqueous solution with or without the presence of surfactants. Pluronic® P-123 was found to have the most dramatic effect in changing the crystal habit of 5,6-DMBTA from needles to platelets. The surfactant with a smaller hydrophobic block, Pluronic® L44NF, or the one with a larger hydrophilic block, Pluronic® F-127, yield only shorter needles for the crystal habit. This indicates that both blocks of a surfactant backbone have an impact on habit modification. Analytical data confirmed that none of the three surfactants were incorporated into the crystal lattice of 5,6-DMBTA after crystallization. All the habit modified crystals have the same crystal form as the original 5,6-DMBTA crystal sample, indicating that solely a habit modifying process took place.

  12. Microbial Dechlorination of 2,3,5,6-Tetrachlorobiphenyl under Anaerobic Conditions in the Absence of Soil or Sediment

    PubMed Central

    Cutter, Leah; Sowers, Kevin R.; May, Harold D.

    1998-01-01

    Bacterial enrichment cultures developed with Baltimore Harbor (BH) sediments were found to reductively dechlorinate 2,3,5,6-tetrachlorobiphenyl (2,3,5,6-CB) when incubated in a minimal estuarine medium containing short-chain fatty acids under anaerobic conditions with and without the addition of sediment. Primary enrichment cultures formed both meta and ortho dechlorination products from 2,3,5,6-CB. The lag time preceding dechlorination decreased from 30 to less than 20 days as the cultures were sequentially transferred into estuarine medium containing dried, sterile BH sediment. In addition, only ortho dechlorination was observed following transfer of the cultures. Sequential transfer into medium without added sediment also resulted in the development of a strict ortho-dechlorinating culture following a lag of more than 100 days. Upon further transfer into the minimal medium without sediment, the lag time decreased to less than 50 days. At this stage all cultures, regardless of the presence of sediment, would produce 2,3,5-CB and 3,5-CB from 2,3,5,6-CB. The strict ortho-dechlorinating activity in the sediment-free cultures has remained stable for more than 1 year through several transfers. These results reveal that the classical microbial enrichment technique using a minimal medium with a single polychlorinated biphenyl (PCB) congener selected for ortho dechlorination of 2,3,5,6-CB. Furthermore, this is the first report of sustained anaerobic PCB dechlorination in the complete absence of soil or sediment. PMID:9687458

  13. Repeated cocaine weakens GABAB-Girk signaling in Layer 5/6 pyramidal neurons in the prelimbic cortex

    PubMed Central

    Hearing, Matthew; Kotecki, Lydia; de Velasco, Ezequiel Marron Fernandez; Fajardo-Serrano, Ana; Luján, Rafael; Wickman, Kevin

    2013-01-01

    Summary Repeated cocaine exposure triggers adaptations in Layer 5/6 glutamatergic neurons in the medial prefrontal cortex (mPFC) that promote behavioral sensitization and drug-seeking behavior. While suppression of metabotropic inhibitory signaling has been implicated in these behaviors, underlying mechanisms are unknown. Here, we show that Girk/KIR3 channels mediate most of the GABAB receptor (GABABR)-dependent inhibition of Layer 5/6 pyramidal neurons in the mPFC and that repeated cocaine suppresses this pathway. This adaptation was selective for GABABR-dependent Girk signaling in Layer 5/6 pyramidal neurons of the prelimbic cortex (PrLC) and involved a D1/5 dopamine receptor- and phosphorylation-dependent internalization of GABABR and Girk channels. Persistent suppression of Girk signaling in Layer 5/6 of the dorsal mPFC enhanced cocaine-induced locomotor activity and occluded behavioral sensitization. Thus, the cocaine-induced suppression of GABABR-Girk signaling in Layer 5/6 pyramidal neurons of the prelimbic cortex appears to represent an early adaptation critical for promoting addiction-related behavior. PMID:24094109

  14. Structural Polymorphism and Thin Film Transistor Behavior in the Fullerene Framework Molecule 5,6;11,12-di-o-Phenylenetetracene.

    PubMed

    Wombacher, Tobias; Gassmann, Andrea; Foro, Sabine; von Seggern, Heinz; Schneider, Jörg J

    2016-05-10

    The molecular structure of the hydrocarbon 5,6;11,12-di-o-phenylenetetracene (DOPT), its material characterization and evaluation of electronic properties is reported for the first time. A single-crystal X-ray study reveals two different motifs of intramolecular overlap with herringbone-type arrangement displaying either face-to-edge or co-facial face-to-face packing depicting intensive π-π interactions. Density functional theory (DFT) calculations underpin that a favorable electronic transport mechanism occurs by a charge hopping process due to a π-bond overlap in the DOPT polymorph with co-facial arene orientation. The performance of polycrystalline DOPT films as active organic semiconducting layer in a state-of-the-art organic field effect transistor (OFET) device was evaluated and proves to be film thickness dependent. For 40 nm layer thickness it displays a saturation hole mobility (μhole ) of up to 0.01 cm(2)  V(-1)  s(-1) and an on/off-ratio (Ion /Ioff ) of 1.5×10(3) . PMID:27061761

  15. Calculation of ejecta thickness and structural uplift for Lunar and Martian complex crater rims.

    NASA Astrophysics Data System (ADS)

    Krüger, Tim; Sturm, Sebastian; Kenkmann, Thomas

    2014-05-01

    Crater rims of simple and complex craters have an elevation that is formed during the excavation stage of crater formation. For simple crater rims it is believed that the elevation is due to the sum of two equal parts, the thickness of the most proximal impact ejecta blanket (overturned flap) plus the thickness that results from plastic deformation including injection [1, 2, 3]. We intend to measure and quantify the kinematics of mass movements, especially concerning the question why complex impact craters have elevated crater rims like simple craters and precisely constrain the ejecta thickness and structural uplift of Lunar and Martian crater rims to understand what the main contributor to the elevated rim is [4]. We investigated a pristine 16 km-diameter unnamed Martian complex crater (21.52°N, 184.35°) and the lunar complex craters Bessel (21.8°N, 17.9°E) 16 km in diameter and Euler (23.3°N, 29.2°W) 28 km in diameter [5, 6]. In the crater walls of these craters we found columnar lavas on Mars and basaltic layering on the Moon. We used the uppermost layers of these exposed outcrops along the crater wall to determine the dip of the target rocks (Mars) and to distinguish between the bedrock and the overlying ejecta. We precisely measured the structural uplift and ejecta thickness of these complex craters. The unnamed crater on Mars has a mean rim height of 375.75 m, with a structural uplift of 233.88 m (57.44%), exposed as columnar lavas and the superposing ejecta has a height of 141.87 m (43.56%). For the Lunar complex crater Euler the mean total rim height is 790 ± 100 m, with a minimal structural uplift of 475 ± 100 m (60 ± 10 %), exposed as basaltic layers [e.g., 7, 8] and a maximum ejecta thickness of 315 ± 100 m (40 ± 10%). The Lunar complex crater Bessel has a total rim height of 430 ± 15 m , with a minimal structural uplift of 290 ± 15 m (67 ± 3 %), exposed as basaltic layers and a maximum ejecta thickness of 140 ± 115 m (33 ± 3%). For the

  16. Role of the transition zone and 660 km discontinuity in mantle dynamics

    NASA Astrophysics Data System (ADS)

    Ringwood, A. E.

    1994-10-01

    Recent seismic evidence suggests that subducted slabs experience resistance to further descent when they encounter the 660 km seismic discontinuity. Several possible causes of this resistance are evaluated. It is concluded that the chemical composition of the lower mantle is similar to that of the upper mantle, and that compositional change is therefore unlikely to be the cause of resistance to slab penetration. The proposal that a large increase of viscosity at the 660 km discontinuity impedes descending slabs is also rejected. However, three other factors are identified, each of which is capable of causing substantial resistance to descending slabs: (1) the negative slope of the transformation of silicate spinel to Mg-perovskite+magnesiowuestite; (2) differentiation of oceanic lithosphere into basaltic and depleted peridotitic layers, causing the slab to be buoyant compared with surrounding mantle pyrolite between depths of 660-800 km; (3) the accumulation of former oceanic crust to produce a gravitationally stable layer of garnetite (about 50 km thick) on top of the 660 km discontinuity. The combined effects of these sources of resistance provide a filter for subducted slabs. Those slabs with seismic zones extending below 600 km may possess sufficient negative buoyancy and strength to overcome the barriers and penetrate into the lower mantle. However, the resistance causes strong buckling and plastic thickening of these slabs, which accumulate to form huge blobs or 'megaliths' underneath the 660 km discontinuity. In contrast, slabs with seismic zones extending no deeper than 300 km possess much smaller degrees of negative buoyancy and strength and hence are unable to penetrate the 660 km discontinuity. Slabs of this type are recycled within the transition zone and upper mantle. Mixing and petrological homogenization processes are less efficient in the transition zone than in the upper mantle (above 400 km). The transition zone is composed mainly of ancient slabs

  17. The metabolism of gamma-2,3,4,5,6-pentachlorocyclohex-1-ene and gamma-hexachlorocyclohexane in rats.

    PubMed

    Grover, P L; Sims, P

    1965-08-01

    1. After intraperitoneal administration, gamma-hexachlorocyclohexane (Gammexane) and gamma-2,3,4,5,6-pentachlorocyclohex-1-ene were converted by rats into 2,3,5- and 2,4,5-trichlorophenol, which were excreted as free phenols and as sulphuric acid and glucuronic acid conjugates. 2. Derivatives of 2,4,5-trichlorophenol and 2,4,5-trichlorophenyl glucosiduronic acid and 2,4-dichlorophenylmercapturic acid were isolated from the urine as metabolites of gamma-2,3,4,5,6-pentachlorocyclohex-1-ene. 3. The phenolic metabolites of gamma-hexachlorocyclohexane and gamma-2,3,4,5,6-pentachlorocyclohex-1-ene isolated from urine were similar to those of 1,2,4-trichlorobenzene, which indicates that the two latter compounds are intermediates in gamma-hexachlorocyclohexane metabolism in rats. PMID:4158352

  18. Sediment thickness beneath the Indo-Gangetic Plain and Siwalik Himalaya inferred from receiver function modelling

    NASA Astrophysics Data System (ADS)

    Borah, Kajaljyoti; Kanna, Nagaraju; Rai, S. S.; Prakasam, K. S.

    2015-03-01

    The Indo-Gangetic Plain and the adjoining Siwalik Himalaya are the seismically most vulnerable regions due to high density of human population and presence of thick sediments that amplify the seismic waves due to an earthquake in the region. We investigate the sedimentary structure and crustal thickness of the region through joint inversion of the receiver function time series at 14 broadband seismograph locations and the available Rayleigh velocity data for the region. Results show significant variability of sedimentary layer thicknesses from 1.0 to 2.0 km beneath the Delhi region to 2.0-5.0 km beneath the Indo-Gangetic Plain and the Siwalik Himalaya. As we progress from the Delhi to the Indo-Gangetic Plain, we observe a decrease in the shear velocity in sedimentary layer from ∼2.0 km/s to ∼1.3 km/s while the layer thickness increases progressively from ∼1.0 km in south to 2.0-5.0 km in the north. Average S-velocity in the sedimentary layer beneath the Siwalik Himalaya is ∼2.1 km/s. Crustal thicknesses varies from ∼42 in the Delhi region, ∼48 km in the Indo-Gangetic Plain, ∼50 km in the western part of Siwalik Himalaya to ∼60 km in the Kumaon region of Siwalik Himalaya.

  19. Kinetically Blocked Stable 5,6:12,13-Dibenzozethrene: A Laterally π-Extended Zethrene with Enhanced Diradical Character.

    PubMed

    Yadav, Priya; Das, Soumyajit; Phan, Hoa; Herng, Tun Seng; Ding, Jun; Wu, Jishan

    2016-06-17

    Although the ground-state and physical properties of zethrene and recently invented 1,2:8,9-dibenzozethrene have been well studied, the other dibenzozethrene isomer, i.e., 5,6:12,13-dibenzozethrene, remained unexplored. A short synthetic route to a kinetically blocked stable 5,6:12,13-dibenzozethrene derivative 5 is presented. The ground state is found to be open-shell singlet experimentally, and the theoretical y0 was enhanced to 0.414, which corroborates nicely with the experimental and theoretical singlet-triplet energy gap. PMID:27227758

  20. Microphysical Model of the Venus clouds between 40km and 80km

    NASA Astrophysics Data System (ADS)

    McGouldrick, Kevin

    2013-10-01

    I am continuing to adapt the Community Aerosol and Radiation Model for Atmospheres (CARMA) to successfully simulate the multi-layered clouds of Venus. The present version of the one-dimensional model now includes a simple parameterization of the photochemicial production of sulfuric acid around altitudes of 62km, and its thermochemical destruction below cloud base. Photochemical production in the model is limited by the availability of water vapor and insolation. Upper cloud particles are introduced into the model via binary homogeneous nucleation, while the lower and middle cloud particles are created via activation of involatile cloud condensation nuclei. Growth by condensation and coagulation and coalescence are also treated. Mass loadings and particle sizes compare favorably with the in situ observations by the Pioneer Venus Large Probe Particle Size Spectrometer, and mixing ratios of volatiles compare favorably with remotely sensed observations of water vapor and sulfuric acid vapor. This work was supported by the NASA Planetary Atmospheres Program, grant number NNX11AD79G.

  1. Liquid thickness gauge

    NASA Technical Reports Server (NTRS)

    Weinstein, Leonard M. (Inventor)

    1988-01-01

    A method and apparatus are developed to measure the thickness of a liquid on a surface independent of liquid conductivity. Two pairs of round, corrosion resistant wires are mounted in an insulating material such that the cross-sectional area of each wire is flush with and normal to the surface. The resistance between each pair of wires is measured using two ac resistance measuring circuits, in which the ratio of the outputs of the two resistance measuring circuits is indicative of the thickness of the liquid on the surface.

  2. Architecture of the Smc5/6 Complex of Saccharomyces cerevisiae Reveals a Unique Interaction between the Nse5-6 Subcomplex and the Hinge Regions of Smc5 and Smc6.

    PubMed

    Duan, Xinyuan; Yang, Yan; Chen, Yu-Hung; Arenz, Jacqueline; Rangi, Gurdish K; Zhao, Xiaolan; Ye, Hong

    2009-03-27

    The evolutionarily conserved structural maintenance of chromosome (SMC) proteins forms the core structures of three multisubunit complexes as follows: cohesin, condensin, and the Smc5/6 complex. These complexes play crucial roles in different aspects of chromosomal organization, duplication, and segregation. Although the architectures of cohesin and condensin are better understood, that of the more recently identified Smc5/6 complex remains to be elucidated. We have previously shown that the Smc5/6 complex of Saccharomyces cerevisiae contains Smc5, Smc6, and six non-SMC elements (Nse1-6). In this study, we investigated the architecture of the budding yeast Smc5/6 complex employing the yeast two-hybrid assay as well as in vitro biochemical approaches using purified recombinant proteins. These analyses revealed that Smc5 and Smc6 associate with each other at their hinge regions and constitute the backbone of the complex, whereas the Nse1-6 subunits form three distinct subcomplexes/entities that interact with different regions of Smc5 and Smc6. The Nse1, -3, and -4 subunits form a stable subcomplex that binds to the head and the adjacent coiled-coil region of Smc5. Nse2 binds to the middle of the coiled-coil region of Smc5. Nse5 and Nse6 interact with each other and, as a heterodimer, bind to the hinge regions of Smc5 and Smc6. These findings provide new insights into the structures of the Smc5/6 complex and lay the foundation for further investigations into the mechanism of its functions. PMID:19141609

  3. Crustal Thickness of Iran Inferred from Converted Waves

    NASA Astrophysics Data System (ADS)

    Taghizadeh-Farahmand, Fataneh; Afsari, Narges; Sodoudi, Forough

    2015-02-01

    The Iranian plate is part of the Alpine-Himalayan orogenic belt, which has been formed by the continental collision between the Arabian and Eurasian plates. The present-day Iranian plate is characterized by diverse tectonic domains including mountain belts (e.g. Zagros and Alborz, Kopeh-Dagh) and oceanic plate subduction (e.g. Makran). Here we present the lateral variations of the Moho discontinuity beneath Iran using a detailed P receiver function study. Our results allow for more precise estimations of the crustal thickness and enable us to provide a detailed Moho depth map for all of Iran for the first time. We used the teleseismic events recorded from 1995 to 2011 at 77 national permanent stations (24 broadband and 53 short period stations). Our results show significant variations in the crustal thickness, which are related to the different geological features within Iran. In general, the average crustal thickness beneath Iran is about 40-45 km. A relatively thick crust of about 54 ± 2 km due to the shortening is observed beneath the Alborz mountain ranges. The crust beneath the Alborz zone shows a thickness changing from 47 ± 2 to 45 ± 2 km from west to east and reaches a thickness of about 50 ± 2 km beneath the Kopeh-Dagh mountain range. We find the thinnest crust of about 33 ± 2 km beneath the Makran subduction zone in southeast Iran showing a normal continental crust, which has not been influenced by collisional processes. The thickest crust (~66 ± 2 km) is locally observed beneath the Sanandaj-Sirjan Zone, which is considered the suture zone of the collision between the Arabian and Eurasian plates.

  4. Thick Film Interference.

    ERIC Educational Resources Information Center

    Trefil, James

    1983-01-01

    Discusses why interference effects cannot be seen with a thick film, starting with a review of the origin of interference patterns in thin films. Considers properties of materials in films, properties of the light source, and the nature of light. (JN)

  5. Selective and effective binding of pillar[5,6]arenes toward secondary ammonium salts with a weakly coordinating counteranion.

    PubMed

    Li, Chunju; Shu, Xiaoyan; Li, Jian; Fan, Jiazeng; Chen, Zhenxia; Weng, Linhong; Jia, Xueshun

    2012-08-17

    The selective and effective binding of secondary ammoniums with a weakly coordinating tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BArF) counteranion by per-ethylated pillar[5,6]arenes is reported. The construction of a first pillararene-based self-sorting system consisting of two wheels and two axles is also described. PMID:22866893

  6. Cyg X-1: A return to the pre-1971 intensity level and a 5.6-day modulation

    NASA Technical Reports Server (NTRS)

    Holt, S. S.; Kaluzienski, L. J.; Boldt, E. A.; Serlemitsos, P. J.

    1976-01-01

    Ariel-5 all sky monitor data on Cyg X-1 X-ray intensity increase during 1975 are analyzed. Data cover rise, maximum, and decay variability of the constellation. Special attention was given to the failure of the increase to decay over the specified period of 5.6 days.

  7. A Study on the Relationship between the Rhythm and Mathematics Skills of 5-6 Year Old Children

    ERIC Educational Resources Information Center

    Mertoglu, Ercan

    2010-01-01

    This is a relational scan study aiming to question the relationship between rhythm skills which are the most fundamental element in musical development and mathematics ability. Also within the general aims of the study is to examine whether this relationship varies with respect to the personal characteristics of 5-6 year olds. It has been…

  8. Lack of mutagenicity of the fungicide 2,4,5,6-tetrachloroisophthalonitrile in the Ames Salmonella/microsome test

    SciTech Connect

    Wei, C.I.

    1982-01-01

    The fungicide 2,4,5,6-tetrachloroisophthalonitrile, detected from a coal fly ash sample, was found to be not mutagenic to five Salmonella typhimurium tester strains. Incorporation of either a liver or a kidney activation system did not increase the mutagenic activity of the fungicide.

  9. Cs[H2NB2(C6F5)6] Featuring an Unequivocal 16-Coordinate Cation.

    PubMed

    Pollak, David; Goddard, Richard; Pörschke, Klaus-Richard

    2016-08-01

    Cesium bis(perfluoro-triphenylborane)amide, Cs[H2NB2(C6F5)6] (1), has been prepared by the reaction of sodium salt and CsF in dichloromethane and water. The compound is exceptional for a [H2NB2(C6F5)6](-) salt in that it contains a monatomic solute-free cation. Determination of the molecular structure revealed a novel C2 symmetrical conformation of the weakly coordinating [H2NB2(C6F5)6](-) anion, which gives rise to an unprecedented 16-coordinate (CN 16) Cs(+) cation in a likewise unprecedented tetracosahedral arrangement of F atoms. The poor solubility of 1 allows nearly quantitative separation of Cs(+) from water, which suggests potential applications as an effective (134/137)Cs remover from nuclear waste solutions, administration as an antidote for (134/137)Cs poisoning, and use for (131/137)Cs radiotherapy (brachytherapy). Rb[H2NB2(C6F5)6]·CH2Cl2 (2) has also been characterized, featuring two inequivalent Rb(+) cations having CN 10, one of which involves Rb(+)(η(2)-Cl2CH2)2 coordination. PMID:27267866

  10. 5-Bromo (or chloro)-6-azido-5,6-dihydro-2' -deoxyuridine and -thymidine derivatives with potent antiviral activity.

    PubMed

    Kumar, Rakesh

    2002-02-11

    Synthesis, antiviral, and cytotoxic activities of 5-bromo (or chloro)-6-azido-5,6-dihydro-2' -deoxyuridine (4,5) and -thymidine (6,7) are reported. Compounds 4 and 5 exhibited a broad spectrum of antiherpes activity against (HSV-1, HSV-2, HCMV, and VZV). PMID:11814776

  11. 77 FR 17386 - Significant New Use Rule for Hexabromocyclododecane and 1,2,5,6,9,10-Hexabromocyclododecane

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-26

    ...EPA is proposing a significant new use rule (SNUR) under section 5(a)(2) of the Toxic Substances Control Act (TSCA) for two chemical substances: Hexabromocyclododecane (Chemical Abstracts Service Registry Number (CASRN) 25637-99-4) and 1,2,5,6,9,10- hexabromocyclododecane (CASRN 3194-55-6), hereinafter collectively referred to as HBCD. This proposed rule would designate ``use in consumer......

  12. Debris cloud characterization at impact velocities of 5 to 11 km/s

    SciTech Connect

    Chhabildas, L.C.; Boslough, M.B.; Reinhart, W.D.; Hall, C.A.

    1993-08-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher to impact a 1.25-mm thick aluminum bumper by an aluminum flier plate 17-mm diameter by 0.92-mm thick over the velocity range of 5 km/s to 11 km/s. Radiographic techniques were employed to record the debris cloud generated upon impact. The shape of the debris cloud is found to depend on the flier plate tilt. Generally -- the data indicate a central core of higher density surrounded by a diffused layer. These experiments allow measurements of debris cloud expansion velocities as the material undergoes a phase change from solid fragments at impact velocities of 5 km/s to a mixture of liquid and vapor phase at higher impact velocities. The expansion velocity of the debris cloud increases with increasing impact velocity, with the high-density leading edge traveling faster than the impact velocity. There is a difference between the X-ray and photographic measurements of expansion velocities at higher impact velocities. This is believed to be due to the presence of very low-density vapor in the photographic records that are not detecting using X-ray techniques.

  13. Hypervelocity impact tests and simulations of single Whipple bumper shield concepts at 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. ); Hill, S.A. )

    1992-01-01

    A series of experiments has been performed to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities of [approximately] 10 km/s. Upon impact by a 19 mm (0.87 nun thick, L/D [approximately]0.5) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of [approximately]14 km/s and expands radially at a velocity of [approximately]7 km/s. Subsequent loading by the debris on a 3.2 mm thick aluminum substructure placed 114 mm from the bumper penetrates the substructure completely. However, when the diameter of the flier plate is reduced to 12.7 mm, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete perforation of the substructure by the subsequent debris cloud for the larger flier plate. The numerical simulation for a 12.7 mm flier plate, however, shows a strong dependence on assumed impact geometry, i.e., a spherical projectile impact geometry does not result in perforation of the substructure by the subsequent debris cloud, while the flat plate impact geometry results in perforation.

  14. Hypervelocity impact tests and simulations of single Whipple bumper shield concepts at 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S.; Hill, S.A.

    1992-12-01

    A series of experiments has been performed to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities of {approximately} 10 km/s. Upon impact by a 19 mm (0.87 nun thick, L/D {approximately}0.5) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of {approximately}14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading by the debris on a 3.2 mm thick aluminum substructure placed 114 mm from the bumper penetrates the substructure completely. However, when the diameter of the flier plate is reduced to 12.7 mm, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete perforation of the substructure by the subsequent debris cloud for the larger flier plate. The numerical simulation for a 12.7 mm flier plate, however, shows a strong dependence on assumed impact geometry, i.e., a spherical projectile impact geometry does not result in perforation of the substructure by the subsequent debris cloud, while the flat plate impact geometry results in perforation.

  15. Whipple bumper shield results and CTH simulations at velocities in excess of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. Jr.; Reinhart, W.D.; Miller, J.M.

    1992-09-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities in excess of 10 km/s. Upon impact by a 0.67 g (0.87 mm thick) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of {approximately}14 km/s and expands radially at a velocity of {approximately}7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris penetrates the substructure completely. However, when the mass of the flier plate is reduced to 0.33 g, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete penetration of the substructure by the subsequent debris cloud for a 0.87 g flier plate. The numerical simulations for a 0.33 g flier plate show a strong dependence on assumed impact geometry. For the assumption of a spherical projectile impact geometry, perforation of the substructure by the subsequent debris cloud is not predicted by CTH.

  16. Whipple bumper shield results and CTH simulations at velocities in excess of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Hertel, E.S. Jr.; Reinhart, W.D.; Miller, J.M.

    1992-09-01

    A series of experiments has been performed on the Sandia HyperVelocity Launcher (HVL) to evaluate the effectiveness of a Whipple bumper shield to orbital space debris at impact velocities in excess of 10 km/s. Upon impact by a 0.67 g (0.87 mm thick) flier plate, the thin aluminum bumper shield disintegrates into a debris cloud. The debris cloud front propagates axially at velocities of [approximately]14 km/s and expands radially at a velocity of [approximately]7 km/s. Subsequent loading on a 3.2 mm thick aluminum substructure by the debris penetrates the substructure completely. However, when the mass of the flier plate is reduced to 0.33 g, the substructure, although damaged, is not perforated over the duration of the experiment. Numerical simulations performed using the multi-dimensional hydrodynamics code CTH also predict complete penetration of the substructure by the subsequent debris cloud for a 0.87 g flier plate. The numerical simulations for a 0.33 g flier plate show a strong dependence on assumed impact geometry. For the assumption of a spherical projectile impact geometry, perforation of the substructure by the subsequent debris cloud is not predicted by CTH.

  17. Ice Shell Thickness and Endogenic Processes on Europa from Mapping and Topographic Analyses of Pits, Uplifts and Small Chaos Features (Invited)

    NASA Astrophysics Data System (ADS)

    Singer, K. N.; McKinnon, W. B.; Schenk, P.

    2013-12-01

    Constraining the thickness of the ice shell on Europa and the geological processes occurring in it are keys to understanding this icy world and its potential habitability. We focus on circular-to-subcircular features generally agreed to have been created by endogenic processes in Europa's ice shell or ocean: pits, uplifts, and subcircular chaos. Pits and uplifts are defined by their negative or positive topographic expression, respectively. Pits and uplifts generally retain pre-existing surface structures such as ridges, while chaos specifically refers to areas where the surface is broken up, in some cases to the point of destroying all original surface topography. We have mapped all features plausibly created by upwellings or other endogenic processes in the size range of 1 to 50 km in diameter, and incorporated previously unavailable topographic data as an aid to mapping and characterization of features. Topography was derived from albedo-controlled photoclinometry and crosschecked with stereo data where possible. Mapping was carried out over the medium-resolution Galileo regional maps (RegMaps) covering approximately 9% of Europa's surface, as well as over available high-resolution regions. While limited in extent, the latter are extremely valuable for detecting smaller features and for overall geomorphological analysis. Results of this new mapping show decreasing numbers of small features, and a peak in the size distribution for all features at approximately 5-6 km in diameter. No pits smaller than 3.3 km in diameter were found in high resolution imagery. Topography was used to find the depths and heights of pits and uplifts in the mapped regions. A general trend of increasing pit depth with increasing pit size was found, a correlation more easily understood in the context of a diapiric hypothesis for feature formation (as opposed to purely non-diapiric, melt-through models). Based on isostasy, maximum pit depths of ~0.3-to-0.48 km imply a minimum shell

  18. New modeling results of the Bunte breccia ejecta morphology and thickness variations outside the Ries impact crater, southern Germany

    NASA Astrophysics Data System (ADS)

    Sturm, S.; Wulf, G.; Jung, D.; Kenkmann, T.

    2012-04-01

    The Ries impact crater with a diameter of ~25 km represents a relatively pristine, complex impact crater in southern Germany that was formed during the Miocene (14.34+-0.08 Ma) [1, 2]. The impact occurred into a two-layered target that consists of ~650 m partly water-saturated and subhorizontally layered sediments (limestones, sandstones, shales) of Triassic to Tertiary ages underlain by crystalline basement rocks (mainly gneisses, granites and amphibolites) [3, 4]. The continuous ejecta blanket of the crater ejected up to a distance of 45 km from the crater center is built up by so called Bunte breccias, a polymict lithic breccia. The ejected breccia material mainly consists of unshocked to weakly shocked sedimentary target clasts in addition to a minority of crystalline basement clasts and reworked surfical sediments (e.g., Upper Freshwater Molasses or Upper Seawater Molasses) [5, 6]. Here we present new results of the morphology of the (i) paleo-relief and (ii) the thickness variations of the continuous ejecta blanket with radial range. For this study we combined digital elevation data and geologic information of the recent geologic map [7] in ArcGIS (ESRI) and RockWorks14 (RockWare) to extract the elevation of the lower contact plane ("paleo-surface") and the contact between the Bunte breccia and the overlain Suevite deposits. In detail, we extracted the mapping information of the autochthonous-allochthonous ("Bunte breccia base") and allochthonous-suevite ("Bunte breccia top") intersections from the geologic map [7], descriptions of nine NASA drilling sites [6], and included up to 40 drillings carried out by the Bavarian Environment Agency to interpolate the morphology and thickness variation of the Bunte breccia ejecta outside the Ries impact crater. Due to the highest data density and the widespread occurrence of Bunte breccia deposits as well as Suevite, the southwestern part of the ejecta blanket was selected for the study and delivered a more or less

  19. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  20. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  1. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  2. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  3. 7 CFR 29.1035 - Mixed color (KM).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Mixed color (KM). 29.1035 Section 29.1035 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1035 Mixed color (KM). Distinctly different colors of the type mingled together....

  4. Exploring KM Features of High-Performance Companies

    NASA Astrophysics Data System (ADS)

    Wu, Wei-Wen

    2007-12-01

    For reacting to an increasingly rival business environment, many companies emphasize the importance of knowledge management (KM). It is a favorable way to explore and learn KM features of high-performance companies. However, finding out the critical KM features of high-performance companies is a qualitative analysis problem. To handle this kind of problem, the rough set approach is suitable because it is based on data-mining techniques to discover knowledge without rigorous statistical assumptions. Thus, this paper explored KM features of high-performance companies by using the rough set approach. The results show that high-performance companies stress the importance on both tacit and explicit knowledge, and consider that incentives and evaluations are the essentials to implementing KM.

  5. Synthesis and study of fluorescence properties of novel pyrazolo[4‧,3‧:5,6]pyrido[2,3-d]pyrimidin-5(6H)-one derivatives

    NASA Astrophysics Data System (ADS)

    Quiroga, Jairo; Acosta, Paola; Ortiz, Alejandro; Insuasty, Braulio; Abonia, Rodrigo

    2015-10-01

    New pyrazolo[4‧,3‧:5,6]pyrido[2,3-d]pyrimidin-5(6H)-one derivatives 5 were prepared by cyclocondensation reaction between heterocyclic o-aminonitriles 3 and carboxylic acids 4 in the presence of sulfuric acid as catalyst. This procedure provides the desired compound in good yield with a simple one-step methodology. The obtained products show interesting fluorescence properties in both solution and solid state; in this way several spectra of absorption and emission were measured for selected compounds 5b, 5e, 5g and 5j, showing a broad and intense emission band around of 470 nm. In other to understand the electronic transition processes, theoretical calculations were performed at TD-DFT level, using B3LYP as functional and 6-31(d,p) as basis set, finding a good agreement with experimental measurements.

  6. Marshall Space Flight Center Propulsion Systems Department (PSD) KM Initiative

    NASA Technical Reports Server (NTRS)

    Caraccioli, Paul; Varnadoe, Tom; McCarter, Mike

    2006-01-01

    NASA Marshall Space Flight Center s Propulsion Systems Department (PSD) is four months into a fifteen month Knowledge Management (KM) initiative to support enhanced engineering decision making and analyses, faster resolution of anomalies (near-term) and effective, efficient knowledge infused engineering processes, reduced knowledge attrition, and reduced anomaly occurrences (long-term). The near-term objective of this initiative is developing a KM Pilot project, within the context of a 3-5 year KM strategy, to introduce and evaluate the use of KM within PSD. An internal NASA/MSFC PSD KM team was established early in project formulation to maintain a practitioner, user-centric focus throughout the conceptual development, planning and deployment of KM technologies and capabilities with in the PSD. The PSD internal team is supported by the University of Alabama's Aging Infrastructure Systems Center Of Excellence (AISCE), Intergraph Corporation, and The Knowledge Institute. The principle product of the initial four month effort has been strategic planning of PSD KM implementation by first determining the "as is" state of KM capabilities and developing, planning and documenting the roadmap to achieve the desired "to be" state. Activities undertaken to support the planning phase have included data gathering; cultural surveys, group work-sessions, interviews, documentation review, and independent research. Assessments and analyses have been performed including industry benchmarking, related local and Agency initiatives, specific tools and techniques used and strategies for leveraging existing resources, people and technology to achieve common KM goals. Key findings captured in the PSD KM Strategic Plan include the system vision, purpose, stakeholders, prioritized strategic objectives mapped to the top ten practitioner needs and analysis of current resource usage. Opportunities identified from research, analyses, cultural/KM surveys and practitioner interviews include

  7. Thick film ink chemistry

    NASA Astrophysics Data System (ADS)

    Gehman, R. W.

    1982-03-01

    Twenty-six thick film inks from two vendors were proved for hybrid microcircuit production use. A data base of chemical information was established for all the inks to aid in future diagnostic and failure analysis activities. Efforts included both organic chemical analysis of printing vehicles and binders and inorganic chemical analysis of glass frits and electrically active phases. Analytical methods included infrared spectroscopy, mass spectroscopy, gas chromatography, X-ray fluorescence, emission spectroscopy, atomic absorption spectroscopy, and wet chemical techniques.

  8. Time-resolved wave-profile measurements at impact velocities of 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Furnish, M.D.; Reinhart, W.D.

    1998-06-01

    Development of well-controlled hypervelocity launch capabilities is the first step to understand material behavior at extreme pressures and temperatures not available using conventional gun technology. In this paper, techniques used to extend both the launch capabilities of a two-stage light-gas gun to 10 km/s and their use to determine material properties at pressures and temperature states higher than those ever obtained in the laboratory are summarized. Time-resolved interferometric techniques have been used to determine shock loading and release characteristics of materials impacted by titanium and aluminum fliers launched by the only developed three-stage light-gas gun at 10 km/s. In particular, the Sandia three stage light gas gun, also referred to as the hypervelocity launcher, HVL, which is capable of launching 0.5 mm to 1.0 mm thick by 6 mm to 19 mm diameter plates to velocities approaching 16 km/s has been used to obtain the necessary impact velocities. The VISAR, interferometric particle-velocity techniques has been used to determine shock loading and release profiles in aluminum and titanium at impact velocities of 10 km/s.

  9. One-hundred-km-scale basins on Enceladus: Evidence for an active ice shell

    NASA Astrophysics Data System (ADS)

    Schenk, Paul M.; McKinnon, William B.

    2009-08-01

    Stereo-derived topographic mapping of ˜50% of Enceladus reveals at least 6 large-scale, ovoid depressions (basins) 90-175 km across and 800-to-1500 m deep and uncorrelated with geologic boundaries. In contrast, the south polar depression is larger and apparently shallower and correlates with active resurfacing. The shape and scale of the basins is inconsistent with impact, geoid surface deflections, or with dynamically supported topography. Isostatic thinning of Enceladus' ice shell associated with upwellings (and tidally-driven ice melting) can plausibly account for these basins. Thinning implies upwarping of the base of the shell of ˜10-20 km beneath the depressions, depending on total shell thickness; loss of near-surface porosity due to enhanced heat flow may also contribute to basin lows. Alternatively, the basins may overly cold, inactive, and hence denser ice, but thermal isostasy alone requires thermal expansion more consistent with clathrate hydrate than water ice.

  10. The temperature gradient between 100 and 120 km

    NASA Technical Reports Server (NTRS)

    Donahue, T. M.; Carignan, G. R.

    1975-01-01

    Oxygen density profiles inferred from Ogo 6 green nightglow emission vary too sharply between 100 and 120 km to be consistent with temperature gradients in standard model atmospheres, and the eddy diffusion coefficient K determined from these observations reaches its maximum below 115 km. For three atomic oxygen profiles obtained at geographic latitudes of -27.69, +48.89, and +59.10 the temperature profiles required to create a downward flux that varies with altitude as the integrated photolytic production rate above that altitude are calculated, assuming K to be invariant with altitude and latitude. The oxygen distribution can be reconciled with a constant eddy coefficient above 100 km if the temperature gradient reaches a value between 10 and 20 deg K/km for low values of the eddy coefficient (about 500,000 sq cm/sec) or between 30 and 50 deg K/km for a higher eddy coefficient (about 1.6 million sq cm/sec). The maximum gradient for the Jacchia (1971) model is about 10 deg K/km. These temperature profiles predict Ar/N ratios consistent with those measured by sounding rockets. The low K profiles are large enough to remove a large part of the solar energy deposited below 120 km by thermal conduction.

  11. Antarctic Crustal Thickness from Gravity Inversion

    NASA Astrophysics Data System (ADS)

    Vaughan, A. P.; Kusznir, N. J.; Ferraccioli, F.; Jordan, T. A.

    2013-12-01

    Using gravity anomaly inversion, we have produced the first comprehensive regional maps of crustal thickness and oceanic lithosphere distribution for Antarctica and the Southern Ocean. We determine Moho depth, crustal basement thickness, continental lithosphere thinning (1-1/β) and ocean-continent transition location using a 3D spectral domain gravity inversion method, which incorporates a lithosphere thermal gravity anomaly correction. The continental lithosphere thinning distribution, used to define the initial thermal model temperature perturbation is derived from the gravity inversion and uses no a priori isochron information; as a consequence the gravity inversion method provides a prediction of ocean-continent transition location, which is independent of ocean isochron information. The gravity anomaly contribution from ice thickness is included in the gravity inversion, as is the contribution from sediments which assumes a compaction controlled sediment density increase with depth. Data used in the gravity inversion are elevation and bathymetry, free-air gravity anomaly, the most recent Bedmap2 ice thickness and bedrock topography compilation south of 60 degrees south (Fretwell et al., 2013) and relatively sparse constraints on sediment thickness. Our gravity inversion study predicts thick crust (> 45 km) under interior East Antarctica penetrated by narrow continental rifts that feature relatively thinner crust. The East Antarctic Rift System (EARS) is a major Permian to Cretaceous age rift system that appears to extend from the continental margin at the Lambert Rift to the South Pole region, a distance of 2500 km. This is comparable in scale to the well-studied East African rift system. Intermediate crustal thickness with an inferred linear rift fabric is predicted under Coates Land. An extensive region of either thick oceanic crust or highly thinned continental crust is predicted offshore Oates Land and north Victoria Land, and also off West Antarctica

  12. Synthesis of S-(-)-5,6-Dihydrocanthin-4-ones via a Triple Cooperative Catalysis-Mediated Domino Reaction.

    PubMed

    Dighe, Shashikant U; Mahar, Rohit; Shukla, Sanjeev K; Kant, Ruchir; Srivastava, Kumkum; Batra, Sanjay

    2016-06-01

    An enantioselective synthesis of S-(-)-5,6-dihydrocanthin-4-ones via a triple cooperative catalysis-mediated domino reaction having a broad substrate scope is reported. The reaction between substituted 1-formyl-9H-β-carbolines and terminal alkynes in the presence of catalytic amounts of Jorgensen-Hayashi catalyst, copper iodide, and Hunig base proceeded via a multicascade route, affording the title compounds in good yields and excellent ees with interesting mechanistic features. These compounds were assessed for in vitro antiplasmodial activity against P. falciparum strains. Additionally, 5,6-dihydrocanthin-4-ones are demonstrated to be a versatile precursor to different fused β-carboline derivatives via simple synthetic transformations. PMID:27159615

  13. Polarization Components in π0 Photoproduction at Photon Energies up to 5.6 GeV

    NASA Astrophysics Data System (ADS)

    Luo, W.; Brash, E. J.; Gilman, R.; Jones, M. K.; Meziane, M.; Pentchev, L.; Perdrisat, C. F.; Puckett, A. J. R.; Punjabi, V.; Wesselmann, F. R.; Ahmidouch, A.; Albayrak, I.; Aniol, K. A.; Arrington, J.; Asaturyan, A.; Ates, O.; Baghdasaryan, H.; Benmokhtar, F.; Bertozzi, W.; Bimbot, L.; Bosted, P.; Boeglin, W.; Butuceanu, C.; Carter, P.; Chernenko, S.; Christy, M. E.; Commisso, M.; Cornejo, J. C.; Covrig, S.; Danagoulian, S.; Daniel, A.; Davidenko, A.; Day, D.; Dhamija, S.; Dutta, D.; Ent, R.; Frullani, S.; Fenker, H.; Frlez, E.; Garibaldi, F.; Gaskell, D.; Gilad, S.; Goncharenko, Y.; Hafidi, K.; Hamilton, D.; Higinbotham, D. W.; Hinton, W.; Horn, T.; Hu, B.; Huang, J.; Huber, G. M.; Jensen, E.; Kang, H.; Keppel, C.; Khandaker, M.; King, P.; Kirillov, D.; Kohl, M.; Kravtsov, V.; Kumbartzki, G.; Li, Y.; Mamyan, V.; Margaziotis, D. J.; Markowitz, P.; Marsh, A.; Matulenko, Y.; Maxwell, J.; Mbianda, G.; Meekins, D.; Melnik, Y.; Miller, J.; Mkrtchyan, A.; Mkrtchyan, H.; Moffit, B.; Moreno, O.; Mulholland, J.; Narayan, A.; Nuruzzaman; Nedev, S.; Piasetzky, E.; Pierce, W.; Piskunov, N. M.; Prok, Y.; Ransome, R. D.; Razin, D. S.; Reimer, P. E.; Reinhold, J.; Rondon, O.; Shabestari, M.; Shahinyan, A.; Shestermanov, K.; Širca, S.; Sitnik, I.; Smykov, L.; Smith, G.; Solovyev, L.; Solvignon, P.; Strakovsky, I. I.; Subedi, R.; Suleiman, R.; Tomasi-Gustafsson, E.; Vasiliev, A.; Veilleux, M.; Wood, S.; Ye, Z.; Zanevsky, Y.; Zhang, X.; Zhang, Y.; Zheng, X.; Zhu, L.

    2012-06-01

    We present new data for the polarization observables of the final state proton in the H1(γ→,p→)π0 reaction. These data can be used to test predictions based on hadron helicity conservation and perturbative QCD. These data have both small statistical and systematic uncertainties and were obtained with beam energies between 1.8 and 5.6 GeV and for π0 scattering angles larger than 75° in the center-of-mass frame. The data extend the polarization measurements database for neutral pion photoproduction up to Eγ=5.6GeV. The results show a nonzero induced polarization above the resonance region. The polarization transfer components vary rapidly with the photon energy and π0 scattering angle in the center-of-mass frame. This indicates that hadron helicity conservation does not hold and that the perturbative QCD limit is still not reached in the energy regime of this experiment.

  14. Antimalarial 5,6-Dihydro-α-pyrones from Cryptocarya rigidifolia: Related Bicyclic Tetrahydro-α-Pyrones Are Artifacts1

    PubMed Central

    2016-01-01

    Antimalarial bioassay-guided fractionation of an EtOH extract of the root wood of Cryptocarya rigidifolia (Lauraceae) led to the isolation of the five new 5,6-dihydro-α-pyrones cryptorigidifoliols A–E (1–5) and the six bicyclic tetrahydro-α-pyrone derivatives cryptorigidifoliols F–K (6–11). The structure elucidations of all compounds were made on the basis of the interpretation of spectroscopic data and chemical derivatization, and the relative and absolute configurations were determined by NOESY, electronic circular dichroism (ECD), and 1H NMR analysis of α-methoxyphenylacetyl (MPA) derivatives. The bicyclic tetrahydro-α-pyrone derivatives were identified as products of acid-catalyzed intramolecular Michael addition of the 5,6-dihydro-α-pyrones in the presence of silica gel. A structure–activity relationship study suggested that the presence of an α,β-unsaturated carbonyl moiety is not essential for potent antimalarial activity. PMID:26042470

  15. The KM phase in semi-realistic heterotic orbifold models

    SciTech Connect

    Giedt, Joel

    2000-07-05

    In string-inspired semi-realistic heterotic orbifolds models with an anomalous U(1){sub X},a nonzero Kobayashi-Masakawa (KM) phase is shown to arise generically from the expectation values of complex scalar fields, which appear in nonrenormalizable quark mass couplings. Modular covariant nonrenormalizable superpotential couplings are constructed. A toy Z{sub 3} orbifold model is analyzed in some detail. Modular symmetries and orbifold selection rules are taken into account and do not lead to a cancellation of the KM phase. We also discuss attempts to obtain the KM phase solely from renormalizable interactions.

  16. NLRP3 deletion protects against renal fibrosis and attenuates mitochondrial abnormality in mouse with 5/6 nephrectomy.

    PubMed

    Gong, Wei; Mao, Song; Yu, Jing; Song, Jiayu; Jia, Zhanjun; Huang, Songming; Zhang, Aihua

    2016-05-15

    Progressive fibrosis in chronic kidney disease (CKD) is the well-recognized cause leading to the progressive loss of renal function. Emerging evidence indicated a pathogenic role of the NACHT, LRR and PYD domains-containing protein 3 (NLRP3) inflammasome in mediating kidney injury. However, the role of NLRP3 in the remnant kidney disease model is still undefined. The present study was undertaken to evaluate the function of NLRP3 in modulating renal fibrosis in a CKD model of 5/6 nephrectomy (5/6 Nx) and the potential involvement of mitochondrial dysfunction in the pathogenesis. Employing NLRP3(+/+) and NLRP3(-/-) mice with or without 5/6 Nx, we examined renal fibrotic response and mitochondrial function. Strikingly, tubulointerstitial fibrosis was remarkably attenuated in NLRP3(-/-) mice as evidenced by the blockade of extracellular matrix deposition. Meanwhile, renal tubular cells in NLRP3(-/-) mice maintained better mitochondrial morphology and higher mitochondrial DNA copy number, indicating an amelioration of mitochondrial abnormality. Moreover, NLRP3 deletion also blunted the severity of proteinuria and CKD-related hypertension. To further evaluate the direct role of NLRP3 in triggering fibrogenesis, mouse proximal tubular cells (PTCs) were subjected to transforming growth factor β1 (TGF-β1), and the cellular phenotypic changes were detected. As expected, TGF-β1-induced alterations of PTC phenotype were abolished by NLRP3 small interfering RNA, in line with a protection of mitochondrial function. Taken together, NLRP3 deletion protected against renal fibrosis in the 5/6 Nx disease model, possibly via inhibiting mitochondrial dysfunction. PMID:26887832

  17. Euphorikanin A, a Diterpenoid Lactone with a Fused 5/6/7/3 Ring System from Euphorbia kansui.

    PubMed

    Fei, Dong-Qing; Dong, Le-Le; Qi, Feng-Ming; Fan, Gai-Xia; Li, Hui-Hong; Li, Zheng-Yu; Zhang, Zhan-Xin

    2016-06-17

    Euphorikanin A (1), an unprecedented diterpenoid lactone which possesses a novel 5/6/7/3-fused tetracyclic ring skeleton, was isolated from the roots of Euphorbia kansui. The chemical structure and absolute stereochemistry were elucidated on the basis of extensive spectroscopic methods and single-crystal X-ray diffraction analysis. Compound 1 exhibited moderate cytotoxicity against two human tumor cell lines HeLa and NCI-446. A proposed biosynthetic pathway of compound 1 is also described. PMID:27230557

  18. Accelerating Thick Aluminum Liners Using Pulsed Power

    SciTech Connect

    Kyrala, G.A.; Hammerburg, J.E.; Bowers, D.; Stokes, J.; Morgan, D.V.; Anderson, W.E.; Cochrane, J.C.

    1999-06-28

    The authors have investigated the acceleration of very thick cylindrical aluminum liners using the Pegasus II capacitory bank. These accelerated solid liners will be used to impact other objects at velocities below 1.5 km/sec, allowing one to generate and sustain shocks of a few 100 kilobar for a few microseconds. A cylindrical shell of 1100 series aluminum with an initial inner radius of 23.61 mm, an initial thickness of 3.0 mm, and a height of 20 mm, was accelerated using a current pulse of 7.15 MA peak current and a 7.4 microsecond quarter cycle time. The aluminum shell was imploded within confining copper glide planes with decreasing separation with an inward slope of 8 degrees. At impact with a cylindrical target of diameter 3-cm, the liner was moving at 1.4 km/sec and its thickness increased to 4.5 mm. Radial X-ray radiograms of the liner showed both the liner and the glide plane interface. The curvature of the inner surface of the liner was measured before impact with the 15-mm radius target. The radiograms also showed that the copper glide planes distorted as the liner radius decreased and that some axial stress is induced in the liner. The axial stresses did not affect the inner curvature significantly. Post-shot calculations of the liner behavior indicated that the thickness of the glide plane played a significant role in the distortion of the interface between the liner and the glide plane.

  19. Modulation of activity and substrate binding modes by mutation of single and double subsites +1/+2 and -5/-6 of barley alpha-amylase 1.

    PubMed

    Mori, H; Bak-Jensen, K S; Gottschalk, T E; Motawia, M S; Damager, I; Møller, B L; Svensson, B

    2001-12-01

    Enzymatic properties of barley alpha-amylase 1 (AMY1) are altered as a result of amino acid substitutions at subsites -5/-6 (Cys95-->Ala/Thr) and +1/+2 (Met298-->Ala/Asn/Ser) as well as in the double mutants, Cys95-->Ala/Met298-->Ala/Asn/Ser. Cys95-->Ala shows 176% activity towards insoluble Blue Starch compared to wild-type AMY1, kcat of 142 and 211% towards amylose DP17 and 2-chloro-4-nitrophenyl beta-d-maltoheptaoside (Cl-PNPG7), respectively, but fivefold to 20-fold higher Km. The Cys95-->Thr-AMY1 AMY2 isozyme mimic exhibits the intermediary behaviour of Cys95-->Ala and wild-type. Met298-->Ala/Asn/Ser have slightly higher to slightly lower activity for starch and amylose, whereas kcat and kcat/Km for Cl-PNPG7 are < or = 30% and < or = 10% of wild-type, respectively. The activity of Cys95-->Ala/Met298-->Ala/Asn/Ser is 100-180% towards starch, and the kcat/Km is 15-30%, and 0.4-1.1% towards amylose and Cl-PNPG7, respectively, emphasizing the strong impact of the Cys95-->Ala mutation on activity. The mutants therefore prefer the longer substrates and the specificity ratios of starch/Cl-PNPG7 and amylose/Cl-PNPG7 are 2.8- to 270-fold and 1.2- to 60-fold larger, respectively, than of wild-type. Bond cleavage analyses show that Cys95 and Met298 mutations weaken malto-oligosaccharide binding near subsites -5 and +2, respectively. In the crystal structure Met298 CE and SD (i.e., the side chain methyl group and sulfur atom) are near C(6) and O(6) of the rings of the inhibitor acarbose at subsites +1 and +2, respectively, and Met298 mutants prefer amylose for glycogen, which is hydrolysed with a slightly lower activity than by wild-type. Met298 AMY1 mutants and wild-type release glucose from the nonreducing end of the main-chain of 6"'-maltotriosyl-maltohexaose thus covering subsites -1 to +5, while productive binding of unbranched substrate involves subsites -3 to +3. PMID:11737209

  20. A Combined Experimental and Theoretical Approach to the Photogeneration of 5,6-Dihydropyrimidin-5-yl Radicals in Nonaqueous Media.

    PubMed

    Aparici-Espert, Isabel; Francés-Monerris, Antonio; Rodríguez-Muñiz, Gemma M; Roca-Sanjuán, Daniel; Lhiaubet-Vallet, Virginie; Miranda, Miguel A

    2016-05-20

    The chemical fate of radical intermediates is relevant to understand the biological effects of radiation and to explain formation of DNA lesions. A direct approach to selectively generate the putative reactive intermediates is based on the irradiation of photolabile precursors. But, to date, radical formation and reactivity have only been studied in aqueous media, which do not completely mimic the microenvironment provided by the DNA structure and its complexes with proteins. Thus, it is also important to evaluate the photogeneration of nucleoside-based radicals in nonaqueous media. The attention here is focused on the independent generation of 5,6-dihydropyrimidin-5-yl radicals in organic solvent through the synthesis of new lipophilic tert-butyl ketone precursors. Formation of 5,6-dihydro-2'-deoxyuridin-5-yl and 5,6-dihydrothymidin-5-yl radicals has first been confirmed by using a new nitroxide-derived profluorescent radical trap. Further evidence has been obtained by nanosecond laser flash photolysis through detection of long-lived transients. Finally, the experimental data are corroborated by multiconfigurational ab initio CASPT2//CASSCF methodology. PMID:27088245

  1. Structure and functional properties of Norrin mimic Wnt for signalling with Frizzled4, Lrp5/6, and proteoglycan

    PubMed Central

    Chang, Tao-Hsin; Hsieh, Fu-Lien; Zebisch, Matthias; Harlos, Karl; Elegheert, Jonathan; Jones, E Yvonne

    2015-01-01

    Wnt signalling regulates multiple processes including angiogenesis, inflammation, and tumorigenesis. Norrin (Norrie Disease Protein) is a cystine-knot like growth factor. Although unrelated to Wnt, Norrin activates the Wnt/β-catenin pathway. Signal complex formation involves Frizzled4 (Fz4), low-density lipoprotein receptor related protein 5/6 (Lrp5/6), Tetraspanin-12 and glycosaminoglycans (GAGs). Here, we report crystallographic and small-angle X-ray scattering analyses of Norrin in complex with Fz4 cysteine-rich domain (Fz4CRD), of this complex bound with GAG analogues, and of unliganded Norrin and Fz4CRD. Our structural, biophysical and cellular data, map Fz4 and putative Lrp5/6 binding sites to distinct patches on Norrin, and reveal a GAG binding site spanning Norrin and Fz4CRD. These results explain numerous disease-associated mutations. Comparison with the Xenopus Wnt8–mouse Fz8CRD complex reveals Norrin mimics Wnt for Frizzled recognition. The production and characterization of wild-type and mutant Norrins reported here open new avenues for the development of therapeutics to combat abnormal Norrin/Wnt signalling. DOI: http://dx.doi.org/10.7554/eLife.06554.001 PMID:26158506

  2. Constraining Enceladus’s ice shell thickness using tidally driven Coulomb failure models of the tiger stripe fractures

    NASA Astrophysics Data System (ADS)

    Olgin, J. G.; Smith-Konter, B. R.; Pappalardo, R. T.

    2009-12-01

    The thickness of Enceladus’s ice shell, and subsequently the depth of its underlying ocean, plays an important role in determining the magnitude and orientation of tidal stresses on the surface of the satellite. The objective of this study is to attempt to constrain Enceladus’s ice shell thickness through assessment of tidally driven Coulomb failure of the tiger stripe fractures, probable sources of tectonic activity that reside along Enceladus’s south polar region. Using the SatStress computational model and assuming a global ocean and uniform ice shell thickness, we compare tidal stresses resulting from a suite of models of variable ice shell thickness (6 km, 24 km, 30 km, 40 km, 50 km, 75 km, and 90 km). Evaluation of the Love numbers for each model (l2, h2 and k2) suggest that ice shell thicknesses greater than a few 10s of km are not capable of generating stress conditions conducive to fault failure on Enceladus. We further investigate the feasibility of tiger stripe failure by applying a Coulomb failure model to the resulting tidal stresses. Based on previous work, we have shown that a 24 km thick ice shell model is capable of generating stress conditions that promote Coulomb failure and strike-slip displacements of ~0.4 m along some portions of the tiger stripe system, assuming a coefficient of friction of 0.2. We compare this reference model to the 6 km, 30 km, 40 km, 50 km, 75 km, and 90 km ice shell models and find that thin to moderate ice shell models do indeed support fault failure, while thick ice shell models do not. Models based on a 6 km ice shell thickness can yield strike-slip displacements on the order of 1 m along all segments of the tiger stripe system. Models based on a 30 km ice shell thickness can also generate strike-slip displacements (~0.1 m), however only on isolated fault segments. Finally, models based on a 40 km ice shell thickness or greater cannot generate stresses capable of Coulomb failure along any of the tiger stripe

  3. 4-km body(ies?) embedded in Saturn's Huygens Ringlet

    NASA Astrophysics Data System (ADS)

    Spitale, Joseph N.; Hahn, Joseph M.; Tamayo, Daniel

    2016-05-01

    Saturn's 20-km-wide Huygens ringlet, located ~250 km exterior to the B ring, displays unusual kinematics, as evidenced by a time variable width-relation. The cause of this behavior is not clear, but may be related to the presence of large embedded bodies (Spitale and Hahn 2016). The largest such bodies produce half-propeller-shaped disturbances originating at the inner edge of the ringlet, whose radial widths imply a size of ~4 km, based on simple scaling from A-ring propellers. Here, we show that a numerical N-body model of the ringlet with a 4-km body embedded near the inner edge produces features that are consistent with the observed half propellers.

  4. High energy neutrino detection with KM3NeT

    NASA Astrophysics Data System (ADS)

    Migliozzi, Pasquale; KM3NeT Collaboration

    2016-05-01

    The KM3NeT Collaboration has started the construction of a next generation high-energy neutrino telescope in the Mediterranean Sea: the largest and most sensitive neutrino research infrastructure. The full KM3NeT detector will be a several cubic kilometres distributed, networked infrastructure. In Italy, off the coast of Capo Passero, and in France, off the coast of Toulon. Thanks to its location in the Northern hemisphere and to its large instrumented volume, KM3NeT will be the optimal instrument to search for neutrinos from the Southern sky and in particular from the Galactic plane, thus making it complementary to IceCube. In this work the technologically innovative component of the detector, the status of construction and the first results from prototypes of the KM3NeT detector will be described as well as its capability to discover neutrino sources are reported.

  5. Akeno 20 km (2) air shower array (Akeno Branch)

    NASA Technical Reports Server (NTRS)

    Teshima, M.; Ohoka, H.; Matsubara, Y.; Hara, T.; Hatano, Y.; Hayashida, N.; He, C. X.; Honda, M.; Ishikawa, F.; Kamata, K.

    1985-01-01

    As the first stage of the future huge array, the Akeno air shower array was expanded to about 20 sq. km. by adding 19 scintillation detectors of 2.25 sq m area outside the present 1 sq. km. Akeno array with a new data collection system. These detectors are spaced about 1km from each other and connected by two optical fiber cables. This array has been in partial operation from 8th, Sep. 1984 and full operation from 20th, Dec. 1984. 20 sq m muon stations are planned to be set with 2km separation and one of them is now under construction. The origin of the highest energy cosmic rays is studied.

  6. How does music aid 5 km of running?

    PubMed

    Bigliassi, Marcelo; León-Domínguez, Umberto; Buzzachera, Cosme F; Barreto-Silva, Vinícius; Altimari, Leandro R

    2015-02-01

    This research investigated the effects of music and its time of application on a 5-km run. Fifteen well-trained male long-distance runners (24.87 ± 2.47 years; 78.87 ± 10.57 kg; 178 ± 07 cm) participated in this study. Five randomized experimental conditions during a 5-km run on an official track were tested (PM: motivational songs, applied before 5 km of running; SM: slow motivational songs, applied during 5 km of running; FM: fast and motivational songs, applied during 5 km of running; CS: calm songs, applied after 5 km of running; CO: control condition). Psychophysiological assessments were performed before (functional near-infrared spectroscopy, heart rate variability [HRV], valence, and arousal), during (performance time, heart rate, and rate of perceived exertion [RPE]), and after (mood, RPE, and HRV) tests. The chosen songs were considered pleasurable and capable of activating. Furthermore, they activated the 3 assessed prefrontal cortex (PFC) areas (medial, right dorsolateral, and left dorsolateral) similarly, generating positive emotional consequences by autonomous system analysis. The first 800 m was accomplished faster for SM and FM compared with other conditions (p ≤ 0.05); moreover, there was a high probability of improving running performance when music was applied (SM: 89%; FM: 85%; PM: 39%). Finally, music was capable of accelerating vagal tonus after 5 km of running with CS (p ≤ 0.05). In conclusion, music was able to activate the PFC area, minimize perceptions, improve performance, and accelerate recovery during 5 km of running. PMID:25029009

  7. Seismology and lateral thickness variations of the lunar crust

    NASA Astrophysics Data System (ADS)

    Chenet, H.; Lognonné, P.; Wieczorek, M.; Mizutani, H.

    The Apollo missions set up a seismic network on the nearside of the Moon (1969-1977), which allowed to address the fundamental questions of lunar science. Recently this dataset was re-investigated in order to shed light on ambiguous results of ancient studies. One of them was the proposed 60 km crustal thickness below the Apollo station 12 and 14 sites. Today, Khan and Mosegaard (2002) and Lognonné et al. (2003), both propose that the crust is much thinner than expected, respectively around 45 and 30 km. On the other hand, lateral relative variations of crustal thickness can be determined by inversion of gravity and topography data, but this process requires the use of a reference thickness brought by seismic determination, in order to build a crustal thickness map. This present work goes further. In this study, we constrain for the first time the lateral variations of crustal thickness with seismic and topography data only. We use a Markov-Chain Monte-Carlo method to invert for the lateral crustal thickness, determined by the arrival times of impacts at the 4 Apollo stations. Each impact and station site is associated to an independent Moho depth. Thus, we find independent seismological constraints on the Moho depth for 30 different locations on the lunar surface instead of one. We will present here the results of this study via a comparison between this first lunar crustal thickness map we built with seismology, and the map resulting from analysis of the gravity data.

  8. The Crustal Thickness of Mars: Accuracy and Resolution

    NASA Technical Reports Server (NTRS)

    Smith, D. E.; Zuber, M. T.

    2002-01-01

    The accuracy of the most recent crustal thickness models of Mars is investigated along with their resolution. Evidence is presented of noise-like features in the maps and spectra that suggest the basic data only represent features down to resolutions of about 300 to 600 km. Additional information is contained in the original extended abstract.

  9. Status of the KM3NeT project

    NASA Astrophysics Data System (ADS)

    Margiotta, A.

    2014-04-01

    KM3NeT is a deep-sea research infrastructure being constructed in the Mediterranean Sea. It will be installed at three sites: KM3NeT-Fr, offshore Toulon, France, KM3NeT-It, offshore Portopalo di Capo Passero, Sicily (Italy) and KM3NeT-Gr, offshore Pylos, Peloponnese, Greece. It will host the next generation Cherenkov neutrino telescope and nodes for a deep sea multidisciplinary observatory, providing oceanographers, marine biologists, and geophysicists with real time measurements. The neutrino telescope will search for Galactic and extra-Galactic sources of neutrinos, complementing IceCube in its field of view. The detector will have a modular structure and consists of six building blocks, each including about one hundred Detection Units (DUs). Each DU will be equipped with 18 multi-PMT digital optical modules. The first phase of construction has started and shore and deep-sea infrastructures hosting the future KM3NeT detector are being prepared in France near Toulon and in Italy, near Capo Passero in Sicily. The technological solutions for KM3NeT and the expected performance of the detector are presented and discussed.

  10. The vertical structure and thickness of Saturn's rings

    NASA Technical Reports Server (NTRS)

    Cuzzi, J. N.; Burns, J. A.; Durisen, R. H.; Hamill, P. M.

    1979-01-01

    An explanation for the vertical structure and thickness of Saturn's rings compatible with observational data is presented. The model of the rings as being many particles thick is shown to be possible, with random particle motions preventing the complete flattening of the system and a gaussian distribution of particle density with vertical displacement. The model prediction of a maximum ring thickness of tens of meters, however, is in conflict with observations of ring thickness of at least 0.8 km at ring-plane passage. It is shown that perturbations to ring particle orbits caused by the sun and Saturn's large satellites may produce long- and short-period coherent vertical ring displacements and a nonlinear displacement of the ring plane from the equatorial plane with radial distance, leading to an apparent edge-on thickness of a few hundred meters.

  11. Fetal nuchal translucency thickness.

    PubMed

    Witters, I; Fryns, J R

    2007-01-01

    In the early 1990s Nicolaides introduced screening for trisomy 21 by fetal nuchal translucency thickness measurement with ultrasound between 11-13(+6) weeks. Already in 1866 L. Down noted that common features of patients with trisomy 21 are a skin being too large for the body and a flat face with a small nose. While detection rates for trisomy 21, given an invasive testing rate of 5%, were only 30% for screening by maternal age and 65% for screening by maternal serum triple test, the detection rate for screening by nuchal translucency combined with maternal age was 75% and this could be increased to 90% in combination with maternal serum screening (serum B-human chorionic gonadotropin and pregnancy-associated plasma protein-A) at 11-13(+6) weeks. The additional soft markers in the first trimester are the fetal nasal bone, the Doppler velocity waveform in the ductus venosus and tricuspid regurgitation and these markers can be used to further increase the detection rate of trisomy 21. In addition increased nuchal translucency thickness can also identify other chromosomal defects (mainly trisomy 13 and 18 and monosomy X) and major congenital malformations (mainly cardiac defects) and genetic syndromes. PMID:17515296

  12. On the relations between cratonic lithosphere thickness, plate motions, and basal drag

    USGS Publications Warehouse

    Artemieva, I.M.; Mooney, W.D.

    2002-01-01

    An overview of seismic, thermal, and petrological evidence on the structure of Precambrian lithosphere suggests that its local maximum thickness is highly variable (140-350 km), with a bimodal distribution for Archean cratons (200-220 km and 300-350 km). We discuss the origin of such large differences in lithospheric thickness, and propose that the lithospheric base can have large depth variations over short distances. The topography of Bryce Canyon (western USA) is proposed as an inverted analog of the base of the lithosphere. The horizontal and vertical dimensions of Archean cratons are strongly correlated: larger cratons have thicker lithosphere. Analysis of the bimodal distribution of lithospheric thickness in Archean cratons shows that the "critical" surface area for cratons to have thick (>300 km) keels is >6-8 ?? 106 km2 . Extrapolation of the linear trend between Archean lithospheric thickness and cratonic area to zero area yields a thickness of 180 km. This implies that the reworking of Archean crust should be accompanied by thinning and reworking of the entire lithospheric column to a thickness of 180 km in accord with thickness estimates for Proterozoic lithosphere. Likewise, extrapolation of the same trend to the size equal to the total area of all Archean cratons implies that the lithospheric thickness of a hypothesized early Archean supercontinent could have been 350-450 km decreasing to 280-400 km for Gondwanaland. We evaluate the basal drag model as a possible mechanism that may thin the cratonic lithosphere. Inverse correlations are found between lithospheric thickness and (a) fractional subduction length and (b) the effective ridge length. In agreement with theoretical predictions, lithospheric thickness of Archean keels is proportional to the square root of the ratio of the craton length (along the direction of plate motion) to the plate velocity. Large cratons with thick keels and low plate velocities are less eroded by basal drag than small

  13. Local fluctuations of ozone from 16 km to 45 km deduced from in situ vertical ozone profile

    NASA Technical Reports Server (NTRS)

    Moreau, G.; Robert, C.

    1994-01-01

    A vertical ozone profile obtained by an in situ ozone sonde from 16 km to 45 km, has allowed to observe local ozone concentration variations. These variations can be observed, thanks to a fast measurement system based on a UV absorption KrF excimer laser beam in a multipass cell. Ozone standard deviation versus altitude calculated from the mean is derived. Ozone variations or fluctuations are correlated with the different dynamic zones of the stratosphere.

  14. Similarities and Differences in Pacing Patterns in a 161-km and 101-km Ultra-Distance Road Race.

    PubMed

    Tan, Philip L S; Tan, Frankie H Y; Bosch, Andrew N

    2016-08-01

    Tan, PLS, Tan, FHY, and Bosch, AN. Similarities and differences in pacing patterns in a 161-km and 101-km ultra-distance road race. J Strength Cond Res 30(8): 2145-2155, 2016-The purpose of this study was to establish and compare the pacing patterns of fast and slow finishers in a tropical ultra-marathon. Data were collected from the Craze Ultra-marathon held on the 22nd and 21st of September in 2012 and 2013, respectively. Finishers of the 161-km (N = 47) and 101-km (N = 120) categories of the race were divided into thirds (groups A-C) by merit of finishing time. Altogether, 17 and 11 split times were recorded for the 161-km and 101-km finishers, respectively, and used to calculate the mean running speed for each distance segment. Running speed for the first segment was normalized to 100, with all subsequent splits adjusted accordingly. Running speed during the last 5 km was calculated against the mean race pace to establish the existence of an end spurt. A reverse J-shaped pacing profile was demonstrated in all groups for both distance categories and only 38% of the finishers executed an end spurt. In the 101-km category, in comparison with groups B and C, group A maintained a significantly more even pace (p = 0.013 and 0.001, respectively) and completed the race at a significantly higher percent of initial starting speed (p = 0.001 and 0.001, respectively). Descriptive data also revealed that the top 5 finishers displayed a "herd-behavior" by staying close to the lead runner in the initial portion of the race. These findings demonstrate that to achieve a more even pace, recreational ultra-runners should adopt a patient sustainable starting speed, with less competitive runners setting realistic performance goals whereas competitive runners with a specific time goal to consider running in packs of similar pace. PMID:26808845

  15. The Equivalent Slab Thickness of Mars' Ionosphere

    NASA Astrophysics Data System (ADS)

    Mendillo, M.; Lawler, G.; Narvaez, C.; Kofman, W.; Mouginot, J.; Morgan, D.; Gurnett, D.

    2014-04-01

    The integral with height of an electron density profile, called the ionospheric total electron content (TEC), is dominated by plasma near the height of maximum electron density (Nmax). The ratio τ = TEC/Nmax has a unit of distance, representing the thickness of a slab of plasma of uniform density (Nmax) with the same TEC. At Earth, the parameter τ has been found to vary far less than either Nmax or TEC, and thus models of τ can be used to generate values of TEC or Nmax when only one is observed. For an ionospheric layer dominated by photo-chemical processes, τ has also been related to the scale height of the neutral gas (H = kT/mg) that is ionized by sunlight. The MARSIS radio science package on the Mars Express satellite has produced large independent data sets of TEC and Nmax. We have used them to form slab thickness patterns versus phase of the solar cycle and solar zenith angle. The overall sample average for daytime (SZA < 90o) conditions is < τ >day = 71 ± 21 km, and for SZA between 90o - 100o, < τ >terminator = 55 ± 25 km. We will report on the possible use of τ patterns to infer characteristics of the martian ionosphere and thermosphere.

  16. Conformational and electronic properties of the two cis (5S,6R) and (5R,6S) diastereoisomers of 5,6-dihydroxy-5,6-dihydrothymidine: X-ray and theoretical studies.

    PubMed

    Jolibois, F; Voituriez, L; Grand, A; Cadet, J

    1996-01-01

    The structure of (+)-cis-(5S,6R)-5,6-dihydroxy-5,6-dihydrothymidine was obtained using X-ray crystallography [space group P2(1) with a = 10.130(3) angstroms, b = 6.434(9) angstroms, c = 11.02(5) angstroms, and beta = 112.646(2) angstroms]. The comparison of the two cis diastereoisomers of thymidine glycol (I, II) showed several structural and conformational differences. The solid state structures appear to be in agreement with the results of 1H NMR studies which were carried out in aqueous solution. Conformational and electronic properties of the ground state of the molecules I and II were obtained using ab initio LSD-DFT theory. Only slight differences between the crystal structure and the optimized geometry are observed for each of the two oxidized nucleosides. On the other hand, molecules I and II exhibit significant differences in their electronic properties. In particular, the dipole moment of (5S,6R)-thymidine glycol (I) is twice smaller than that of the (5R,6S) diastereoisomer (II). It is noteworthy that these differences in the electronic properties between the two compounds may be related to changes in the rotameric population around the C4'-C5' bond. The repartition of the electrostatic potential is different in the two compounds. These observations lead to a better understanding of the structural changes when the above lesions are included within a DNA molecule. PMID:8924607

  17. Curcumin Induces Nrf2 Nuclear Translocation and Prevents Glomerular Hypertension, Hyperfiltration, Oxidant Stress, and the Decrease in Antioxidant Enzymes in 5/6 Nephrectomized Rats

    PubMed Central

    Tapia, Edilia; Soto, Virgilia; Ortiz-Vega, Karla Mariana; Zarco-Márquez, Guillermo; Molina-Jijón, Eduardo; Cristóbal-García, Magdalena; Santamaría, José; García-Niño, Wylly Ramsés; Correa, Francisco; Zazueta, Cecilia; Pedraza-Chaverri, José

    2012-01-01

    Renal injury resulting from renal ablation induced by 5/6 nephrectomy (5/6NX) is associated with oxidant stress, glomerular hypertension, hyperfiltration, and impaired Nrf2-Keap1 pathway. The purpose of this work was to know if the bifunctional antioxidant curcumin may induce nuclear translocation of Nrf2 and prevents 5/6NX-induced oxidant stress, renal injury, decrease in antioxidant enzymes, and glomerular hypertension and hyperfiltration. Four groups of rats were studied: (1) control, (2) 5/6NX, (3) 5/6NX +CUR, and (4) CUR (n = 8–10). Curcumin was given by gavage to NX5/6 +CUR and CUR groups (60 mg/kg/day) starting seven days before surgery. Rats were studied 30 days after NX5/6 or sham surgery. Curcumin attenuated 5/6NX-induced proteinuria, systemic and glomerular hypertension, hyperfiltration, glomerular sclerosis, interstitial fibrosis, interstitial inflammation, and increase in plasma creatinine and blood urea nitrogen. This protective effect was associated with enhanced nuclear translocation of Nrf2 and with prevention of 5/6NX-induced oxidant stress and decrease in the activity of antioxidant enzymes. It is concluded that the protective effect of curcumin against 5/6NX-induced glomerular and systemic hypertension, hyperfiltration, renal dysfunction, and renal injury was associated with the nuclear translocation of Nrf2 and the prevention of both oxidant stress and the decrease of antioxidant enzymes. PMID:22919438

  18. Tacrolimus restores podocyte injury and stabilizes the expression of Cabin1 in 5/6 nephrectomized rats.

    PubMed

    Wen, Yueqiang; Liu, Lingling; Zhou, Peilan; Li, Huiyuan; Wang, Zebin; Zhang, Yajie; Liang, Jianbo

    2016-05-01

    Podocyte injury is a vital factor, which induces massive proteinuria. Studies have shown that tacrolimus (TAC) protected podocyte via stabilizing cytoskeleton. Our latest study indicates that calcineurin binding protein 1 (Cabin1) undergoes nuclear translocation during podocytes injury. Whether TAC targets on Cabin1 during podocyte injury is still not clear. This study establishes non-immunological proteinuric model. To observe the effect of the treatment of TAC on Cabin1 expression in 5/6 nephrectomized rats. Sprague-Dawley rats were injected with TAC (0.2 mg/kg/day) for 4-8 weeks after 5/6 nephrectomy. Then, rats were sacrificed in the eighth week after operation, renal tissues were processed for morphological studies under light and electrical microscope. Cabin1 expression and distribution were detected by western blot and indirect immunofluorescence staining. In 5/6 nephrectomized rats, urinary protein excretion reached 90.2 ± 30.1 mg/24 h, glomerular sclerosis index and tubulointerstitial fibrosis score were significantly increased, and widespread of podocyte foot processes fusion was found. Moreover, Cabin1 protein expression was markedly increased, and its distribution became much more obviously in podocytes nuclei. In TAC treated rats, urinary protein excretion significantly decreased (44.9 ± 22.5 mg/24 h), glomerular sclerosis and tubulointerstitial fibrosis were alleviated, and podocyte foot processes fusion was inhibited. Furthermore, TAC alleviated the increased protein expression and abnormal distribution of Cabin1. In conclusion, TAC restores podocyte injury and stabilizes the expression of Cabin1. Cabin1 may become a new target to demonstrate the mechanism of TAC in podocyte injury. PMID:26905810

  19. Phagraphene: A Low-Energy Graphene Allotrope Composed of 5-6-7 Carbon Rings with Distorted Dirac Cones.

    PubMed

    Wang, Zhenhai; Zhou, Xiang-Feng; Zhang, Xiaoming; Zhu, Qiang; Dong, Huafeng; Zhao, Mingwen; Oganov, Artem R

    2015-09-01

    Using systematic evolutionary structure searching we propose a new carbon allotrope, phagraphene [fæ'græfi:n], standing for penta-hexa-hepta-graphene, because the structure is composed of 5-6-7 carbon rings. This two-dimensional (2D) carbon structure is lower in energy than most of the predicted 2D carbon allotropes due to its sp(2)-binding features and density of atomic packing comparable to graphene. More interestingly, the electronic structure of phagraphene has distorted Dirac cones. The direction-dependent cones are further proved to be robust against external strain with tunable Fermi velocities. PMID:26262429

  20. Comparison of energy calibration of Prognoz 5, 6, 7, and 8 and other hard-X-ray solar photometers

    NASA Astrophysics Data System (ADS)

    Farnik, F.; Valnicek, B.; Sylwester, B.; Sylwester, J.; Jakimiec, J.

    1984-08-01

    The data obtained by the Prognoz 5, 6, 7, and 8 hard-X-ray photometers are compared with the measurements carried out by similar instruments aboard Solrad 11, ISEE 3, SMM, and Hinotori satellites. Using the method of relative-amplitude analysis, the apparent disagreement in the energy-discrimination-level calibration between the instruments is pointed out. The results of the comparison and possible sources of disagreement are given. An international effort to develop a system of uniform prelaunch calibration of photometers based on a reference calibration source is suggested.

  1. Synthesis of Substituted 2,3,5,6-tetraarylbenzo(1,2-b:5,4-b')difurans

    NASA Technical Reports Server (NTRS)

    Abdul-Aziz, Mahmoud; Auping, Judith V.; Meador, Michael A.

    1995-01-01

    A series of substituted 2,3,5,6-tetraarylbenzo(l,2-b:5,4-b')difurans 1 was synthesized. This synthesis is based upon the photocyclization of 2,5-dibenzoylresorcinol dibenzyl ethers to the corresponding tetrahydrobenzo(1,2-b:5,4-b')difurans. Treatment of the photoproducts with methanesulfonyl chloride in pyridine afforded 1 in overall yields ranging from 30-72%. A number of these compounds have high fluorescence quantum yields (of phi(sub f) = 0.76-0.90), and their fluorescence spectra exhibit large solvatochromic shifts. These compounds may be suitable for use as fluorescent probes.

  2. Ultrasonic Inspection Of Thick Sections

    NASA Technical Reports Server (NTRS)

    Friant, C. L.; Djordjevic, B. B.; O'Keefe, C. V.; Ferrell, W.; Klutz, T.

    1993-01-01

    Ultrasonics used to inspect large, relatively thick vessels for hidden defects. Report based on experiments in through-the-thickness transmission of ultrasonic waves in both steel and filament-wound composite cases of solid-fuel rocket motors.

  3. Gravity Waves Near 300 km Over the Polar Caps

    NASA Technical Reports Server (NTRS)

    Johnson, F. S.; Hanson, W. B.; Hodges, R. R.; Coley, W. R.; Carignan, G. R.; Spencer, N. W.

    1995-01-01

    Distinctive wave forms in the distributions of vertical velocity and temperature of both neutral particles and ions are frequently observed from Dynamics Explorer 2 at altitudes above 250 km over the polar caps. These are interpreted as being due to internal gravity waves propagating in the neutral atmosphere. The disturbances characterized by vertical velocity perturbations of the order of 100 m/s and horizontal wave lengths along the satellite path of about 500 km. They often extend across the entire polar cap. The associated temperature perturbations indicate that the horizontal phase progression is from the nightside to the dayside. Vertical displacements are inferred to be of the order of 10 km and the periods to be of the order of 10(exp 3) s. The waves must propagate in the neutral atmosphere, but they usually are most clearly recognizable in the observations of ion vertical velocity and ion temperature. By combining the neutral pressure calculated from the observed neutral concentration and temperature with the vertical component of the neutral velocity, an upward energy flux of the order of 0.04 erg/sq cm-s at 250 km has been calculated, which is about equal to the maximum total solar ultraviolet heat input above that altitude. Upward energy fluxes calculated from observations on orbital passes at altitudes from 250 to 560 km indicate relatively little attenuation with altitude.

  4. Full 40 km crustal reflection seismic datasets in several Indonesian basins

    NASA Astrophysics Data System (ADS)

    Dinkelman, M. G.; Granath, J. W.; Christ, J. M.; Emmet, P. A.; Bird, D. E.

    2010-12-01

    Long offset, deep penetration regional 2D seismic data sets have been acquired since 2002 by GX Technology in a number of regions worldwide (www.iongeo.com/Data_Libraries/Spans/). Typical surveys consist of 10+ lines located to image specific critical aspects of basin structure. Early surveys were processed to 20 km, but more recent ones have extended to 40-45 km from 16 sec records. Pre-stack time migration is followed by pre-stack depth migration using gravity and in some cases magnetic modeling to constrain the velocity structure. We illustrate several cases in the SE Asian and Australasian area. In NatunaSPAN™ two generations of inversion can be distinguished, one involving Paleogene faults with Neogene inversion and one involving strike slip-related uplift in the West Natuna Basin. Crustal structure in the very deep Neogene East Natuna Basin has also been imaged. The JavaSPAN™ program traced Paleogene sediments onto oceanic crust of the Flores Sea, thus equating back arc spreading there to the widespread Eocene extension. It also imaged basement in the Makassar Strait beneath as much as 6 km of Cenozoic sedimentary rocks that accumulated Eocene rift basins (the North and South Makassar basins) on the edge of Sundaland, the core of SE Asia. The basement is seismically layered: a noisy upper crust overlies a prominent 10 km thick transparent zone, the base of which marks another change to slightly noisier reflectivity. Eocene normal faults responsible for the opening of extensional basins root in the top of the transparent layer which may be Moho or a brittle-ductile transition within the extended continental crust. Of particular significance is the first image of thick Precambrian basins comprising the bulk of continental crust under the Arafura Sea in the ArafuraSPAN™ program. Four lines some 1200 km long located between Australia and New Guinea on the Arafura platform image a thin Phanerozoic section overlying a striking Precambrian basement composed of

  5. Depressed mantle discontinuities beneath Iceland: Evidence of a garnet controlled 660 km discontinuity?

    NASA Astrophysics Data System (ADS)

    Jenkins, J.; Cottaar, S.; White, R. S.; Deuss, A.

    2016-01-01

    The presence of a mantle plume beneath Iceland has long been hypothesised to explain its high volumes of crustal volcanism. Practical constraints in seismic tomography mean that thin, slow velocity anomalies representative of a mantle plume signature are difficult to image. However it is possible to infer the presence of temperature anomalies at depth from the effect they have on phase transitions in surrounding mantle material. Phase changes in the olivine component of mantle rocks are thought to be responsible for global mantle seismic discontinuities at 410 and 660 km depth, though exact depths are dependent on surrounding temperature conditions. This study uses P to S seismic wave conversions at mantle discontinuities to investigate variation in topography allowing inference of temperature anomalies within the transition zone. We employ a large data set from a wide range of seismic stations across the North Atlantic region and a dense network in Iceland, including over 100 stations run by the University of Cambridge. Data are used to create over 6000 receiver functions. These are converted from time to depth including 3D corrections for variations in crustal thickness and upper mantle velocity heterogeneities, and then stacked based on common conversion points. We find that both the 410 and 660 km discontinuities are depressed under Iceland compared to normal depths in the surrounding region. The depression of 30 km observed on the 410 km discontinuity could be artificially deepened by un-modelled slow anomalies in the correcting velocity model. Adding a slow velocity conduit of -1.44% reduces the depression to 18 km; in this scenario both the velocity reduction and discontinuity topography reflect a temperature anomaly of 210 K. We find that much larger velocity reductions would be required to remove all depression on the 660 km discontinuity, and therefore correlated discontinuity depressions appear to be a robust feature of the data. While it is not possible

  6. The -145 km/S Absorption System of Eta Carinae

    NASA Technical Reports Server (NTRS)

    Vieira, G.; Gull, T. R.; Danks, A.; Johansson, S.

    2002-01-01

    With the STIS E230H mode (R-118,000) , we have identified about twenty absorption components in line of sight from Eta Carinae. Two components, one at -513 km/s and another at -145 W s , are quite different in character from the others, mostly at intermediate velocities. The -145 km/s component is significantly wider in fwhm, is seen in many more species, and the lower level can be above 20,000/cm, well above the 2000/cm noted in the -513 km/s component. In the spectral region from 2400 to 3160A, approximately 500 absorption lines have been identified. In this poster, we will present line identifications and atomic parameters of the measured lines, hopefully providing insight as to what levels are being excited and by what processes.

  7. Estimation of doses to Taikonauts in SZ-5/6/7 missions using a male voxel model

    NASA Astrophysics Data System (ADS)

    Xu, Feng; Zeng, Zhi; Jia, Xianghong

    2011-11-01

    Objective To assess the Taikonaut's space radiation risk organ, doses have been calculated using a male voxel model. Methods A male voxel model based on MRI was built. The proton spectra were calculated by AP-8 with SPENVIS and Badhwar's GCR model. The general 3 D Monte Carlo particle and heavy ion transport code GEANT4 was used to calculate the average doses for some organs and tissues. Results After 1 g/cm2 shielding shell, the absorbed dose rate of skin is 0.6 mGy/d and effective dose rate is estimated to be 2.3 mSv/d during the SZ-5/6/7 mission. The total effective dosesof the taikonauts are estimated to be around 2.0 mSv during the SZ-5 mission, 10.9mSv during the SZ-6 mission and 6.5 mSv during the SZ-7 mission separately. Conclusion The calculated skin doses are closed to the values measured by TLDs in SZ-5/6/7, and within the range of 0.2~0.6mSv published by USA and Russia.

  8. Estimation of doses to Taikonauts in SZ-5/6/7 missions using a male voxel model

    NASA Astrophysics Data System (ADS)

    Xu, Feng; Zeng, Zhi; Jia, Xianghong

    2012-03-01

    Objective To assess the Taikonaut's space radiation risk organ, doses have been calculated using a male voxel model. Methods A male voxel model based on MRI was built. The proton spectra were calculated by AP-8 with SPENVIS and Badhwar's GCR model. The general 3 D Monte Carlo particle and heavy ion transport code GEANT4 was used to calculate the average doses for some organs and tissues. Results After 1 g/cm2 shielding shell, the absorbed dose rate of skin is 0.6 mGy/d and effective dose rate is estimated to be 2.3 mSv/d during the SZ-5/6/7 mission. The total effective dosesof the taikonauts are estimated to be around 2.0 mSv during the SZ-5 mission, 10.9mSv during the SZ-6 mission and 6.5 mSv during the SZ-7 mission separately. Conclusion The calculated skin doses are closed to the values measured by TLDs in SZ-5/6/7, and within the range of 0.2~0.6mSv published by USA and Russia.

  9. Polarization components in π0 photoproduction at photon energies up to 5.6 GeV

    SciTech Connect

    Luo, W.; Brash, E. J.; Gilman, R.; Jones, M. K.; Meziane, M.; Pentchev, L.; Perdrisat, C. F; Puckett, A. J.R.; Punjabi, V.; Wesselmann, F. R.; Marsh, A.; Matulenko, Y.; Maxwell, J.; Meekins, D.; Melnik, Y.; Miller, J.; Mkrtchyan, A.; Mkrtchyan, H.; Moffit, B.; Moreno, O.; Mulholland, J.; Narayan, A.; Nuruzzaman, .; Nedev, S.; Piasetzky, E.; Pierce, W.; Piskunov, N. M.; Prok, Y.; Ransome, R. D.; Razin, D. S.; Reimer, P. E.; Reinhold, J.; Rondon, O.; Shabestari, M.; Shahinyan, A.; Shestermanov, K.; Sirca, S.; Sitnik, I.; Smykov, L.; Smith, G.; Solovyev, L.; Solvignon, P.; Strakovsky, I. I; Subedi, R.; Suleiman, R.; Tomasi-Gustafsson, E.; Vasiliev, A.; Veilleux, M.; Wood, S.; Ye, Z.; Zanevsky, Y.; Zhang, X.; Zhang, Y.; Zheng, X.; Zhu, L.; Ahmidouch, A.; Albayrak, I.; Aniol, K. A.; Arrington, J.; Asaturyan, A.; Ates, O.; Baghdasaryan, H.; Benmokhtar, F.; Bertozzi, W.; Bimbot, L.; Bosted, P.; Boeglin, W.; Butuceanu, C.; Carter, P.; Chernenko, S.; Christy, M. E.; Commisso, M.; Cornejo, J. C.; Covrig, S.; Danagoulian, S.; Daniel, A.; Davidenko, A.; Day, D.; Dhamija, S.; Dutta, D.; Ent, R.; Frullani, S.; Fenker, H.; Frlez, E.; Garibaldi, F.; Gaskell, D.; Gilad, S.; Goncharenko, Y.; Hafidi, K.; Hamilton, D.; Higinbotham, D. W.; Hinton, W.; Horn, T.; Hu, B.; Huang, J.; Huber, G. M.; Jensen, E.; Kang, H.; Keppel, C.; Khandaker, M.; King, P.; Kirillov, D.; Kohl, M.; Kravtsov, V.; Kumbartzki, G.; Li, Y.; Mamyan, V.; Margaziotis, D. J.; Markowitz, P.

    2012-05-31

    We present new data for the polarization observables of the final state proton in the 1H(→ γ, → p)π0 reaction. These data can be used to test predictions based on hadron helicity conservation (HHC) and perturbative QCD (pQCD). These data have both small statistical and systematic uncertainties, and were obtained with beam energies between 1.8 and 5.6 GeV and for π0 scattering angles larger than 75{sup o} in center-of-mass (c.m.) frame. The data extend the polarization measurements data base for neutral pion photoproduction up to Eγ = 5.6 GeV. The results show non-zero induced polarization above the resonance region. The polarization transfer components vary rapidly with the photon energy and π0 scattering angle in the center-of-mass frame. This indicates that HHC does not hold and that the pQCD limit is still not reached in the energy regime of this experiment.

  10. Polarization components in π0 photoproduction at photon energies up to 5.6 GeV

    DOE PAGESBeta

    Luo, W.; Brash, E. J.; Gilman, R.; Jones, M. K.; Meziane, M.; Pentchev, L.; Perdrisat, C. F; Puckett, A. J.R.; Punjabi, V.; Wesselmann, F. R.; et al

    2012-05-31

    We present new data for the polarization observables of the final state proton in the 1H(→ γ, → p)π0 reaction. These data can be used to test predictions based on hadron helicity conservation (HHC) and perturbative QCD (pQCD). These data have both small statistical and systematic uncertainties, and were obtained with beam energies between 1.8 and 5.6 GeV and for π0 scattering angles larger than 75{sup o} in center-of-mass (c.m.) frame. The data extend the polarization measurements data base for neutral pion photoproduction up to Eγ = 5.6 GeV. The results show non-zero induced polarization above the resonance region. Themore » polarization transfer components vary rapidly with the photon energy and π0 scattering angle in the center-of-mass frame. This indicates that HHC does not hold and that the pQCD limit is still not reached in the energy regime of this experiment.« less

  11. Smc5/6 Mediated Sumoylation of the Sgs1-Top3-Rmi1 Complex Promotes Removal of Recombination Intermediates.

    PubMed

    Bonner, Jaclyn N; Choi, Koyi; Xue, Xiaoyu; Torres, Nikko P; Szakal, Barnabas; Wei, Lei; Wan, Bingbing; Arter, Meret; Matos, Joao; Sung, Patrick; Brown, Grant W; Branzei, Dana; Zhao, Xiaolan

    2016-07-12

    Timely removal of DNA recombination intermediates is critical for genome stability. The DNA helicase-topoisomerase complex, Sgs1-Top3-Rmi1 (STR), is the major pathway for processing these intermediates to generate conservative products. However, the mechanisms that promote STR-mediated functions remain to be defined. Here we show that Sgs1 binds to poly-SUMO chains and associates with the Smc5/6 SUMO E3 complex in yeast. Moreover, these interactions contribute to the sumoylation of Sgs1, Top3, and Rmi1 upon the generation of recombination structures. We show that reduced STR sumoylation leads to accumulation of recombination structures, and impaired growth in conditions when these structures arise frequently, highlighting the importance of STR sumoylation. Mechanistically, sumoylation promotes STR inter-subunit interactions and accumulation at DNA repair centers. These findings expand the roles of sumoylation and Smc5/6 in genome maintenance by demonstrating that they foster STR functions in the removal of recombination intermediates. PMID:27373152

  12. 5,6-Dehydrokawain from Alpinia zerumbet promotes osteoblastic MC3T3-E1 cell differentiation.

    PubMed

    Kumagai, Momochika; Mishima, Takashi; Watanabe, Akio; Harada, Teppei; Yoshida, Izumi; Fujita, Kazuhiro; Watai, Masatoshi; Tawata, Shinkichi; Nishikawa, Keisuke; Morimoto, Yoshiki

    2016-07-01

    Bone homeostasis is maintained by balancing bone formation and bone resorption, but an imbalance between them is associated with various bone-related diseases such as osteoporosis and rheumatoid arthritis. We found that 5,6-dehydrokawain (DK) and dihydro-5,6-dehydrokawain (DDK), which were isolated as promising compounds from Alpinia zerumbet rhizomes, promote differentiation of osteoblastic MC3T3-E1 cells. DK and DDK increased the alkaline phosphatase activity and matrix mineralization of MC3T3-E1 cells. DK exerts larger effects than DDK. The gene expression of runt-related transcription factor 2 and osterix, which are essential transcription factors in the early period of osteoblast differentiation, was significantly increased by DK treatment. The mRNA level of distal-less homeobox 5 was also enhanced by DK treatment, and DK activated the p38 mitogen-activated protein kinase pathway. Therefore, DK may have clinical potential for preventing osteoporosis, and could be considered as a potential anabolic therapeutic agent. PMID:26940726

  13. Polarization components in π0 photoproduction at photon energies up to 5.6 GeV.

    PubMed

    Luo, W; Brash, E J; Gilman, R; Jones, M K; Meziane, M; Pentchev, L; Perdrisat, C F; Puckett, A J R; Punjabi, V; Wesselmann, F R; Ahmidouch, A; Albayrak, I; Aniol, K A; Arrington, J; Asaturyan, A; Ates, O; Baghdasaryan, H; Benmokhtar, F; Bertozzi, W; Bimbot, L; Bosted, P; Boeglin, W; Butuceanu, C; Carter, P; Chernenko, S; Christy, M E; Commisso, M; Cornejo, J C; Covrig, S; Danagoulian, S; Daniel, A; Davidenko, A; Day, D; Dhamija, S; Dutta, D; Ent, R; Frullani, S; Fenker, H; Frlez, E; Garibaldi, F; Gaskell, D; Gilad, S; Goncharenko, Y; Hafidi, K; Hamilton, D; Higinbotham, D W; Hinton, W; Horn, T; Hu, B; Huang, J; Huber, G M; Jensen, E; Kang, H; Keppel, C; Khandaker, M; King, P; Kirillov, D; Kohl, M; Kravtsov, V; Kumbartzki, G; Li, Y; Mamyan, V; Margaziotis, D J; Markowitz, P; Marsh, A; Matulenko, Y; Maxwell, J; Mbianda, G; Meekins, D; Melnik, Y; Miller, J; Mkrtchyan, A; Mkrtchyan, H; Moffit, B; Moreno, O; Mulholland, J; Narayan, A; Nuruzzaman; Nedev, S; Piasetzky, E; Pierce, W; Piskunov, N M; Prok, Y; Ransome, R D; Razin, D S; Reimer, P E; Reinhold, J; Rondon, O; Shabestari, M; Shahinyan, A; Shestermanov, K; Širca, S; Sitnik, I; Smykov, L; Smith, G; Solovyev, L; Solvignon, P; Strakovsky, I I; Subedi, R; Suleiman, R; Tomasi-Gustafsson, E; Vasiliev, A; Veilleux, M; Wood, S; Ye, Z; Zanevsky, Y; Zhang, X; Zhang, Y; Zheng, X; Zhu, L

    2012-06-01

    We present new data for the polarization observables of the final state proton in the (1)H(γ,p)π(0) reaction. These data can be used to test predictions based on hadron helicity conservation and perturbative QCD. These data have both small statistical and systematic uncertainties and were obtained with beam energies between 1.8 and 5.6 GeV and for π(0) scattering angles larger than 75° in the center-of-mass frame. The data extend the polarization measurements database for neutral pion photoproduction up to E(γ)=5.6 GeV. The results show a nonzero induced polarization above the resonance region. The polarization transfer components vary rapidly with the photon energy and π(0) scattering angle in the center-of-mass frame. This indicates that hadron helicity conservation does not hold and that the perturbative QCD limit is still not reached in the energy regime of this experiment. PMID:23180491

  14. Renal endothelial function is associated with the anti-proteinuric effect of ACE inhibition in 5/6 nephrectomized rats.

    PubMed

    Vettoretti, Simone; Vavrinec, Peter; Ochodnicky, Peter; Deelman, Leo E; De Zeeuw, Dick; Henning, Rob H; Buikema, Hendrik

    2016-05-01

    In healthy rats, the physiological variation of baseline endothelial function of intrarenal arteries correlates with the severity of renal damage in response to a subsequent specific renal injury. However, whether such a variation in endothelial function may also condition or predict the variable response to angiotensin-converting enzyme-inhibiting treatment in these individuals has not been addressed before. To study this, 5/6 nephrectomy was performed to induce renal injury and chronic kidney disease in a group of healthy Wistar rats. At the time of nephrectomy, interlobar arteries were obtained from the extirpated right kidney and studied in vitro for endothelium-dependent relaxation to acetylcholine. Six weeks thereafter, treatment with lisinopril was started (n = 11) and continued for 9 wk. Proteinuria (metabolic cages) and systolic blood pressure (SBP; tail cuff) were evaluated weekly, and these were analyzed in relation to renal endothelial function at baseline. 5/6 Nephrectomy induced an increase in SBP and progressive proteinuria. Treatment with lisinopril reduced SBP and slowed proteinuria, albeit to a variable degree among individuals. The acetylcholine-induced renal artery dilation at baseline negatively correlated with lisinopril-induced reduction of proteinuria (r(2) = 0.648, P = 0.003) and with the decrease in SBP (r(2) = 0.592, P = 0.006). Our data suggest that angiotensin-converting enzyme-inhibitor attenuates the progression of renal damage the most in those individuals with decreased basal renal endothelial-mediated vasodilation. PMID:26911850

  15. Evaluation of triggering schemes for KM3NeT

    NASA Astrophysics Data System (ADS)

    Seitz, T.; Herold, B.; Shanidze, R.

    2013-10-01

    The future neutrino telescope KM3NeT, to be built in the Mediterranean Sea, will be the largest of its kind. It will include nearly two hundred thousand photomultiplier tubes (PMT) mounted in multi-PMT digital optical modules (DOM). The dominant source of the PMT signals is decays of 40K and marine fauna bioluminescence. Selection of neutrino and muon events from this continuous optical background signals requires the implementation of fast and efficient triggers. Various schemes for the filtering of background data and the selection of neutrino and muon events were evaluated for the KM3NeT telescope using Monte Carlo simulations.

  16. Simulation of CO2 release at 800 km altitude

    NASA Astrophysics Data System (ADS)

    Setayesh, A.

    1993-08-01

    The SOCRATES contamination-interaction code has been used to simulate the reactions of 0 + CO2 yields CO2(v) + O, O + CO2 - CO(v) + O2, and CO2 + H - CO + OH(v) at an altitude of 800 km in both ram and wake directions of the spacecraft. These simulations show that the radiation from these reactions can be measurable for the parameters which have been used in these calculations. The investigation carries out the simulations as much as 30 km from the spacecraft. The radiative intensity of CO(v) and OH(v) show the highest and lowest, respectively.

  17. Cascade sensitivity studies for KM3NeT

    NASA Astrophysics Data System (ADS)

    Fusco, Luigi Antonio

    2016-07-01

    KM3NeT is a future research infrastructure in the deep seas of the Mediterranean housing a large scale neutrino telescope. The first phase of construction of the telescope has started. Next step is an intermediate phase realising a detector volume of about one-third of the final detector volume. We report on calculations of the sensitivity of the KM3NeT detector to showering neutrino events, the strategy to optimise the detector to a cosmic neutrino flux analogous to the one reported by the IceCube Collaboration and the results of this strategy applied to the intermediate phase detector.

  18. Thermal thickness and evolution of Precambrian lithosphere: A global study

    USGS Publications Warehouse

    Artemieva, I.M.; Mooney, W.D.

    2001-01-01

    The thermal thickness of Precambrian lithosphere is modeled and compared with estimates from seismic tomography and xenolith data. We use the steady state thermal conductivity equation with the same geothermal constraints for all of the Precambrian cratons (except Antarctica) to calculate the temperature distribution in the stable continental lithosphere. The modeling is based on the global compilation of heat flow data by Pollack et al. [1993] and more recent data. The depth distribution of heat-producing elements is estimated using regional models for ???300 blocks with sizes varying from 1?? ?? 1?? to about 5?? ?? 5?? in latitude and longitude and is constrained by laboratory, seismic and petrologic data and, where applicable, empirical heat flow/heat production relationships. Maps of the lateral temperature distribution at depths 50, 100, and 150 km are presented for all continents except Antarctica. The thermal thickness of the lithosphere is calculated assuming a conductive layer overlying the mantle with an adiabat of 1300??C. The Archean and early Proterozoic lithosphere is found to have two typical thicknesses, 200-220 km and 300-350 km. In general, thin (???220 km) roots are found for Archean and early Proterozoic cratons in the Southern Hemisphere (South Africa, Western Australia, South America, and India) and thicker (>300 km) roots are found in the Northern Hemisphere (Baltic Shield, Siberian Platform, West Africa, and possibly the Canadian Shield). We find that the thickness of continental lithosphere generally decreases with age from >200 km beneath Archean cratons to intermediate values of 200 ?? 50 km in early Proterozoic lithosphere, to about 140 ?? 50 km in middle and late Proterozoic cratons. Using known crustal thickness, our calculated geotherms, and assuming that isostatic balance is achieved at the base of the lithosphere, we find that Archean and early Proterozoic mantle lithosphere is 1.5% less dense (chemically depleted) than the

  19. Subduction of thick crust: the Alaska example (Invited)

    NASA Astrophysics Data System (ADS)

    Abers, G. A.; Kim, Y.; Christensen, D. H.

    2013-12-01

    It is a paradigm of plate tectonics that oceanic lithosphere subducts readily, while lithosphere transporting much thicker continental crust does not. Analyses of plate buoyancy have included a variety of effects, such as eclogitization, crustal compositional stratification, and plate strength, but all lead to the conclusion that crust needs to be thinner than about 15-25 km in order to subduct. A test of this conclusion is underway in southern Alaska, where the Yakutat terrane is being driven by the Pacific plate into the Alaskan margin. Its crust is 15-30 km thick, varying along strike, with a seismic velocity structure resembling an oceanic plateau; thus it spans the predicted limit in thickness of subductable crust. In the eastern thicker part, the terrane appears to be colliding and driving orogenesis in the St. Elias-Chugach ranges, although voluminous volcanism of the Wrangell Volcanic Field may be a consequence of some crust subducting. Farther west, the Yakutat terrane is 15-20 km thick and clearly subducting beneath the Prince William Sound and Kenai Peninsula. It forms the slab subducting beneath the central Alaska Range 400 km inland. The thick crust has been imaged at all depths less than 130 km, through receiver functions, travel-time tomography, and offshore by active-source imaging, with similar structure in most images. Greater than 130 km depth the imaged crust vanishes in seismic images, consistent with predicted depths of eclogitization of weakly hydrated metagabbroic crust, and the lack of a velocity contrast between eclogite and peridotite. Lithosphere including the thick Yakutat crust gives a net buoyancy close to neutral, so its subduction will depend on other factors. The high buoyancy may be responsible for the remarkably shallow dip of the plate at depths less than 50 km, producing one of the widest seismogenic thrust zones on the planet, allowing it to host the great (Mw 9.3) 1964 Gulf of Alaska earthquake. The shallow dip may also aid

  20. Waterway Ice Thickness Measurements

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The ship on the opposite page is a U. S. Steel Corporation tanker cruising through the ice-covered waters of the Great Lakes in the dead of winter. The ship's crew is able to navigate safely by plotting courses through open water or thin ice, a technique made possible by a multi-agency technology demonstration program in which NASA is a leading participant. Traditionally, the Great Lakes-St. Lawrence Seaway System is closed to shipping for more than three months of winter season because of ice blockage, particularly fluctuations in the thickness and location of ice cover due to storms, wind, currents and variable temperatures. Shippers have long sought a system of navigation that would allow year-round operation on the Lakes and produce enormous economic and fuel conservation benefits. Interrupted operations require that industrial firms stockpile materials to carry them through the impassable months, which is costly. Alternatively, they must haul cargos by more expensive overland transportation. Studies estimate the economic benefits of year-round Great Lakes shipping in the hundreds of millions of dollars annually and fuel consumption savings in the tens of millions of gallons. Under Project Icewarn, NASA, the U.S. Coast Guard and the National Oceanic Atmospheric Administration collaborated in development and demonstration of a system that permits safe year-round operations. It employs airborne radars, satellite communications relay and facsimile transmission to provide shippers and ships' masters up-to-date ice charts. Lewis Research Center contributed an accurate methods of measuring ice thickness by means of a special "short-pulse" type of radar. In a three-year demonstration program, Coast Guard aircraft equipped with Side-Looking Airborne Radar (SLAR) flew over the Great Lakes three or four times a week. The SLAR, which can penetrate clouds, provided large area readings of the type and distribution of ice cover. The information was supplemented by short

  1. 40 CFR 721.9504 - Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8-tridecafluorooctyl)-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Silane, triethoxy (3,3,4,4,5,5, 6,6,7... Significant New Uses for Specific Chemical Substances § 721.9504 Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8... substance identified as silane, triethoxy (3,3,4,4,5, 5,6,6,7,7,8,8,8-tridecafluorooctyl)- (PMN...

  2. 40 CFR 721.9504 - Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8-tridecafluorooctyl)-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Silane, triethoxy (3,3,4,4,5,5, 6,6,7... Significant New Uses for Specific Chemical Substances § 721.9504 Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8... substance identified as silane, triethoxy (3,3,4,4,5, 5,6,6,7,7,8,8,8-tridecafluorooctyl)- (PMN...

  3. 40 CFR 721.9504 - Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8-tridecafluorooctyl)-.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Silane, triethoxy (3,3,4,4,5,5, 6,6,7... Significant New Uses for Specific Chemical Substances § 721.9504 Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8... substance identified as silane, triethoxy (3,3,4,4,5, 5,6,6,7,7,8,8,8-tridecafluorooctyl)- (PMN...

  4. 40 CFR 721.9504 - Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8-tridecafluorooctyl)-.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Silane, triethoxy (3,3,4,4,5,5, 6,6,7... Significant New Uses for Specific Chemical Substances § 721.9504 Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8... substance identified as silane, triethoxy (3,3,4,4,5, 5,6,6,7,7,8,8,8-tridecafluorooctyl)- (PMN...

  5. 40 CFR 721.9504 - Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8-tridecafluorooctyl)-.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Silane, triethoxy (3,3,4,4,5,5, 6,6,7... Significant New Uses for Specific Chemical Substances § 721.9504 Silane, triethoxy (3,3,4,4,5,5, 6,6,7,7,8,8,8... substance identified as silane, triethoxy (3,3,4,4,5, 5,6,6,7,7,8,8,8-tridecafluorooctyl)- (PMN...

  6. 5,6-EET Is Released upon Neuronal Activity and Induces Mechanical Pain Hypersensitivity via TRPA1 on Central Afferent Terminals

    PubMed Central

    Sisignano, Marco; Park, Chul-Kyu; Angioni, Carlo; Zhang, Dong Dong; von Hehn, Christian; Cobos, Enrique J.; Ghasemlou, Nader; Xu, Zhen-Zhong; Kumaran, Vigneswara; Lu, Ruirui; Grant, Andrew; Fischer, Michael J. M.; Schmidtko, Achim; Reeh, Peter; Ji, Ru-Rong; Woolf, Clifford J.; Geisslinger, Gerd; Scholich, Klaus; Brenneis, Christian

    2012-01-01

    Epoxyeicosatrienoic acids (EETs) are cytochrome P450-epoxygenase-derived metabolites of arachidonic acid that act as endogenous signaling molecules in multiple biological systems. Here we have investigated the specific contribution of 5,6-EET to transient receptor potential (TRP) channel activation in nociceptor neurons and its consequence for nociceptive processing. We found that, during capsaicin-induced nociception, 5,6-EET levels increased in dorsal root ganglia (DRGs) and the dorsal spinal cord, and 5,6-EET is released from activated sensory neurons in vitro. 5,6-EET potently induced a calcium flux (100 nm) in cultured DRG neurons that was completely abolished when TRPA1 was deleted or inhibited. In spinal cord slices, 5,6-EET dose dependently enhanced the frequency, but not the amplitude, of spontaneous EPSCs (sEPSCs) in lamina II neurons that also responded to mustard oil (allyl isothiocyanate), indicating a presynaptic action. Furthermore, 5,6-EET-induced enhancement of sEPSC frequency was abolished in TRPA1-null mice, suggesting that 5,6-EET presynaptically facilitated spinal cord synaptic transmission by TRPA1. Finally, in vivo intrathecal injection of 5,6-EET caused mechanical allodynia in wild-type but not TRPA1-null mice. We conclude that 5,6-EET is synthesized on the acute activation of nociceptors and can produce mechanical hypersensitivity via TRPA1 at central afferent terminals in the spinal cord. PMID:22553041

  7. Castro ring zone: a 4,500-km2 fossil hydrothermal system in the Challis volcanic field, central Idaho.

    USGS Publications Warehouse

    Criss, R.E.; Ekren, E.B.; Hardyman, R.F.

    1984-01-01

    The largest fossil hydrothermal system occupying a 4500 km2 area in central Idaho is revealed by delta 18O studies. The remains of this meteoric-hydrothermal system are preserved within a sharply bounded, 15 km wide, 70-km-diameter annulus of low delta 18O rock (+2.0 to -8.8per mille) termed the Castro ring zone. The zone is centred on a less depleted (+4.5) core zone consisting of granitic rocks of the Castro pluton. This 700-km2 Eocene subvolcanic batholith has intruded, domed, and hydrothermally metamorphosed a thick sequence of Challis Volcanics, the stratigraphically low rocks in the 2000-km2 Van Horn Peak and the 1000-km2 Thunder Mountain cauldron complexes being most strongly altered. Less extreme 18O depletions occur in the youngest major ash-flow sheets of these complexes, indicating a vertical 18O gradient. Water/rock ratios of geothermal systems are surprisingly insensitive to the circulation scale.-L.-di H.

  8. Gravity wave vertical energy flux at 95 km

    NASA Technical Reports Server (NTRS)

    Jacob, P. G.; Jacka, F.

    1985-01-01

    A three-field photometer (3FP) located at Mt. Torrens near Adelaide, is capable of monitoring different airglow emissions from three spaced fields in the sky. A wheel containing up to six different narrow bandpass interference filters can be rotated, allowing each of the filters to be sequentially placed into each of the three fields. The airglow emission of interest is the 557.7 nm line which has an intensity maximum at 95 km. Each circular field of view is located at the apexes of an equilateral triangle centered on zenith with diameters of 5 km and field separations of 13 km when projected to the 95-km level. The sampling period was 30 seconds and typical data lengths were between 7 and 8 hours. The analysis and results from the interaction of gravity waves on the 557.7 nm emission layer are derived using an atmospheric model similar to that proposed by Hines (1960) where the atmosphere is assumed isothermal and perturbations caused by gravity waves are small and adiabatic, therefore, resulting in linearized equations of motion. In the absence of waves, the atmosphere is also considered stationary. Thirteen nights of quality data from January 1983 to October 1984, covering all seasons, are used in this analysis.

  9. The KM3NeT neutrino telescope

    NASA Astrophysics Data System (ADS)

    de Jong, M.; KM3NeT Consortium

    2010-11-01

    KM3NeT is a deep-sea research infrastructure to be constructed in the Mediterranean Sea hosting a neutrino telescope with a volume of at least one cubic kilometre. The scientific case for a neutrino telescope of a cubic kilometre scale is overwhelming. The infrastructure it requires will be shared by a host of other sciences, making continuous and long-term measurements in the fields of oceanography, geophysics, and marine biological sciences possible. The feasibility of neutrino astronomy with a detector in the deep sea was proven by the successful deployment and operation of the ANTARES prototype detector. The potential of the detection technique, based on the reconstruction of the tracks of muons, the possible reaction products of the sought after neutrinos, has been demonstrated. With two other pilot projects, NEMO and NESTOR, different detector configurations and techniques were explored. The three projects have provided a wealth of information on the technologies required for a large deep-sea neutrino telescope. KM3NeT will reap the benefits. It is planned to make KM3NeT a CO2-neutral facility, using wind or solar energy to supply the required power for the underwater system as well as the shore station. The proposed infrastructure will be built by a European consortium (KM3NeT). The total cost is estimated at 220-250 M€.

  10. The -145 km/s Absorption System of Eta Carinae

    NASA Astrophysics Data System (ADS)

    Vieira, G. L.; Gull, T. R.; Danks, A. C.; Johansson, S.

    2002-12-01

    With the STIS E230H mode (R 118,000), we have identified about twenty absorption components in line of sight from Eta Carinae. Two components, one at -513 km/s and another at -145 km/s, are quite different in character from the others, mostly at intermediate velocities (See adjacent posters by T. Gull and A. Danks). The -145 km/s component is significantly wider in fwhm, is seen in many more species, and the lower level can be above 20,000 cm-1, well above the 2000 cm-1 noted in the -513 km/s component. In the spectral region from 2400 to 3160A, approximately 500 absorption lines have been identified. In this poster, we will present line identifications and atomic parameters of the measured lines, hopefully providing insight as to what levels are being excited and by what processes. Observations were accomplished through STScI under proposal 9242 (Danks, P.I.). Funding is through the STIS GTO resources.

  11. Models of earth's atmosphere (90 to 2500 km)

    NASA Technical Reports Server (NTRS)

    1973-01-01

    This monograph replaces a monograph on the upper atmosphere which was a computerized version of Jacchia's model. The current model has a range from 90 to 2500 km. In addition to the computerized model, a quick-look prediction method is given that may be used to estimate the density for any time and spatial location without using a computer.

  12. Body Composition Measurements of 161-km Ultramarathon Participants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compares body composition characteristics with performance among participants in a 161-km trail ultramarathon. Height, mass, and percent body fat from bioimpedence spectroscopy were measured on 72 starters. Correlation analyses were used to compare body characteristics with finish time, ...

  13. Radar Interferometric Possibilities for Determining Sea Ice Thickness

    NASA Astrophysics Data System (ADS)

    Hensley, S.; Holt, B.; Jaruwatanadilok, S.; Steward, J.; Oveisgharan, S.; Moller, D.; Mahoney, A. R.; Reis, J.

    2014-12-01

    Sea ice thickness is a primary indicator of climate change in the polar oceans, as the thickness is a time-integrated result of both thermodynamic and dynamic processes. The large-scale ocean and atmospheric forcing acts on the fine-scale (a few to 10s of meters) opening and closing of the sea ice cover along fractures. The mean thickness and variance of sea thickness at km scales (50 cm uncertainty) are derived from recent spaceborne observations from the ICESat lidar and in the Arctic from sporadic upward looking sonar measurements. However, accurate measurements of sea ice thickness at the fine-scales at which the forcing is occurring are virtually non-existent. In this paper we explore two potential radar interferometric means of obtaining sea ice thickness. One method uses high frequency Ka-band (8.5 mm wavelength) to infer sea ice thickness by measuring elevations to the surface of the ice and to the ocean surface in nearby open leads. Data from the NASA Glistin radar is used to illustrate this methodology. Alternatively, we consider the use of dual frequency X-band and P-band (3 cm and 85 cm wavelengths) to exploit the differential penetration of longer versus shorter wavelength to estimate sea ice thickness. This technique is illustrated with data collected by the Furgo Earthdata GeoSAR system. Portions of this research were conducted at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

  14. Regional anomalies of sediment thickness, basement depth and isostatic crustal thickness in the North Atlantic Ocean

    NASA Astrophysics Data System (ADS)

    Louden, Keith E.; Tucholke, Brian E.; Oakey, Gordon N.

    2004-07-01

    We calculate the anomalous basement topography for the North Atlantic Ocean from 30° to 70°N latitude and from 0° to 70°W longitude at a resolution of roughly 6×6 km, using grids of total sediment thickness and observed and predicted sea-floor bathymetry to correct for the effects of isostatic sediment loading and lithospheric age. Plotting this residual topography for various plate reconstructions during opening of the North Atlantic, we delineate consistent patterns of basement highs related to variations in hotspot-related volcanism. In addition to Iceland and the Azores, we recognize three centers of excess volcanism at the mid-Atlantic ridge: the Milne Seamounts and Azores-Biscay Rise (˜75-40 Ma), the Southeast Newfoundland Ridge and Madeira-Tore Rise (˜130-110 Ma), and the East and West Thulean Rises (˜60-50 Ma). The duration of volcanic activity ranges from 8 to 10 m.y. (Thulean Rises) to 60 m.y. (Iceland) and thus it appears that both long- and short-lived hotspots coexist, even in relatively close proximity. In contrast, during the period 110-60 Ma we observe little excess volcanism during either continental breakup or seafloor spreading. We estimate isostatic crustal thickness from the anomalous basement depths, after first removing dynamic effects created by mantle flow. Maximum thicknesses of volcanic features, from 30 km beneath the Greenland-Iceland-Faeroe ridge to ˜15 km beneath the Azores-Biscay Rise, are broadly consistent with seismic data and predictions of decompression melting. Widths of volcanic features indicate that thickening primarily occurs within 100-200 km of hotspots except along continental margins that rifted at the time of the hotspot activity (i.e. East Greenland and the Hatton-Rockall Bank). We observe conjugate structures south of Greenland and Edoras Bank, where excess volcanism appears to have extended beyond the margin proper and into oceanic crust. Similar conjugate features appear in the Labrador Sea south of Davis

  15. The stereochemical outcome of electrophilic addition reactions on the 5,6-double bond in the spinosyns.

    PubMed

    De Amicis, C V; Graupner, P R; Erickson, J A; Paschal, J W; Kirst, H A; Creemer, L C; Fanwick, P E

    2001-12-14

    The electrophilic addition of reagents to the 5,6-double bond in spinosyn A and spinosyn D systems occurred with high pi-diastereofacial selectivity. Addition occurred preferentially from the beta face of the molecule with selectivities ranging from 5:1 to better than 30:1. Various NMR properties were investigated in order to distinguish the beta and alpha isomers with the help of theoretical models of the products. These NMR properties include a (13)C gamma effect to C-11 and vicinal coupling between H-4 and H-5. To help rationalize the selectivity, computational studies on the transition states for epoxidation were calculated using density functional theory. The results indicate that beta epoxidation is favored and that the geometries of the transition structures are consistent with torsional steering being the source of the selectivity. PMID:11735521

  16. Flexible charge balanced stimulator with 5.6 fC accuracy for 140 nC injections.

    PubMed

    Nag, Sudip; Jia, Xiaofeng; Thakor, Nitish V; Sharma, Dinesh

    2013-06-01

    Electrical stimulations of neuronal structures must ensure net injected charges to be zero for biological safety and voltage compliance reasons. We present a novel architecture of general purpose biphasic constant current stimulator that exhibits less than 5.6 fC error while injecting 140 nC charges using 1.4 mA currents. The floating current sources and conveyor switch based system can operate in monopolar or bipolar modes. Anodic-first or cathodic-first pulses with optional inter-phase delays have been demonstrated with zero quiescent current requirements at the analog front-end. The architecture eliminates blocking capacitors, electrode shorting and complex feedbacks. Bench-top and in-vivo measurement results have been presented with emulated electrode impedances (resistor-capacitor network), Ag-AgCl electrodes in saline and in-vivo (acute) peripheral nerve stimulations in anesthetized rats. PMID:23853326

  17. Synthesis of 1,4,5,6-tetrahydropyridine derivatives starting from trans-3-chloro-1,3-alkadien-5-ones

    SciTech Connect

    Melikyan, G.G.; Atanesyan, K.A.; Aslanyan, G.Kh.; Tirakyan, M.R.; Khachatryan, L.A.; Badanyan, Sh.O.

    1987-10-01

    A method has been developed for the synthesis of 3-carbethoxy-2-methyl-6-(oxo-alkylidene)-1,4,5,6-tetrahydropyridines by reaction of trans-3-chloro-1,3-alkadien-5-ones with ethyl aminocrotonate. It is shown that the corresponding vinylacetylanic ketones are intermediate products of the reactions. PMR spectra in CCl/sub 4/ were obtained on a Perkin-Elmer R12B (60 MHz) spectrometer, with TMS as internal standard. /sup 13/C NMR spectra were recordeed on a Bruker WH-90 instrument (22.63 MHz) without suppression and with complete suppression of spin-spin coupling. IR spectra were recorded in CCl/sub 4/ on a UR-10 instrument, mass spectra were recorded on a MX-1303 spectrometer with electron ionization energy of 30 eV.

  18. Bioconcentration of 5,5',6-trichlorobiphenyl and pentachlorophenol in the midge, Chironomus riparius, as measured by a pharmacokinetic model

    USGS Publications Warehouse

    Lydy, M.J.; Hayton, W.L.; Staubus, A.E.; Fisher, S.W.

    1994-01-01

    A two compartment pharmacokinetic model was developed which describes the uptake and elimination of 5,5',6-trichlorobiphenyl (TCB) and pentachlorophenol (PCP) in the midge, Chironomus riparius. C. riparius were exposed to nominal TCB (2 ??g L-1) and PCP (9 ??g L-1) concentrations during a 16 h static uptake phase. Depuration was determined over approximately 45 h using a flowthrough system without feeding. The uptake clearance (P) was 330 ?? 61 ml g-1 midge h-1 for TCB and 55 ?? 4 ml g-1 midge h-1 for PCP, while measured bioconcentration factors (BCF) were 35,900 and 458 for TCB and PCP, respectively. Overall, the clearance-volume- based pharmacokinetic model predicted BCF values that were consistent with published values as well as with BCF values obtained from the octanol-water partition coefficient (K(ow)).

  19. New 2-phenyl-4,5,6,7-tetrahydro-2H-indazole derivatives as paddy field herbicides.

    PubMed

    Hwang, In Taek; Kim, Hyoung Rae; Jeon, Dong Ju; Hong, Kyung Sik; Song, Jong Hwan; Chung, Chang Kook; Cho, Kwang Yun

    2005-05-01

    A series of 3-chloro-2-(4-chloro-2-fluorophenyl)-4,5,6,7-tetrahydro-2H-indazole derivatives containing various substituted isoxazolinylmethoxy groups at the 5-position of the benzene ring were synthesized and their herbicidal activities assessed under greenhouse and flooded paddy conditions. Among them, compounds having a phenyl or cyano substituent at the 3-position of the 5-methyl-isoxazolin-5-yl structure demonstrated good rice selectivity and potent herbicidal activity against annual weeds at 16-63 g AI ha(-1) under greenhouse conditions. Field trials indicated that these two compounds controlled a wide range of annual weeds rapidly with a good tolerance on transplanted rice seedlings by pre-emergence application. They showed a low mammalian and environmental toxicity in various toxicological tests. PMID:15627239

  20. SAMS Acceleration Measurements on Mir from May 1997 to June 1998 (NASA Increments 5, 6, and 7)

    NASA Technical Reports Server (NTRS)

    DeLombard, Richard

    1999-01-01

    During NASA Increments 5, 6, and 7 (May 1997 to June 1998), about eight gigabytes of acceleration data were collected by the Space Acceleration Measurement System (SAMS) onboard the Russian Space Station Mir. The data were recorded on twenty-seven optical disks which were returned to Earth on Orbiter missions STS-86, STS-89, and STS-91. During these increments, SAMS data were collected in the Priroda module to support various microgravity experiments. This report points out some of the salient features of the microgravity acceleration environment to which the experiments were exposed. This report presents an overview of the SAMS acceleration measurements recorded by 10 Hz and 100 Hz sensor heads. The analyses included herein complement those presented in previous Mir increment summary reports prepared by the Principal Investigator Microgravity Services project.

  1. Design, Synthesis and Evaluation of Novel 2,5,6-Trisubstituted Benzimidazoles Targeting FtsZ as Antitubercular Agents

    PubMed Central

    Park, Bora; Awasthi, Divya; Chowdhury, Soumya R.; Melief, Eduard H.; Kumar, Kunal; Knudson, Susan E.; Slayden, Richard A.; Ojima, Iwao

    2014-01-01

    Filamenting temperature-sensitive protein Z (FtsZ), an essential cell division protein, is a promising target for the drug discovery of new-generation antibacterial agents against various bacterial pathogens. As a part of SAR studies on benzimidazoles, we have synthesized a library of 376 novel 2,5,6-trisubstituted benzimidazoles, bearing ether or thioether linkage at the 6-position. In a preliminary HTP screening against Mtb H37Rv, 108 compounds were identified as hits at a cut off concentration of 5 μg/mL. Among those hits, 10 compounds exhibited MIC values in the range of 0.63–12.5 μg/mL. Light scattering assay and TEM analysis with the most potent compound 5a clearly indicate that its molecular target is Mtb-FtsZ. Also, the Kd of 5a with Mtb-FtsZ was determined to be 1.32 μM. PMID:24726304

  2. Spark-Plasma Sintering of W-5.6Ni-1.4Fe Heavy Alloys: Densification and Grain Growth

    NASA Astrophysics Data System (ADS)

    Hu, Ke; Li, Xiaoqiang; Qu, Shengguan; Li, Yuanyuan

    2013-02-01

    W-5.6Ni-1.4Fe heavy alloys were prepared by the method of spark-plasma sintering, and the densification and grain growth kinetics were analyzed as a function of various parameters such as sintering temperature and dwell duration. It is found that the local temperature gradient at the vicinity of the pores can cause the matrix phase melting or softening, resulting in a viscous layer coating the W particles and an improved solubility of W into the matrix phase. In the initial stage, particle rearrangement and neck formation and growth take place, and γ-(Ni, Fe) matrix phase has formed. Dissolution-precipitation and Ni-enhanced W grain boundary diffusion together with viscous process contribute to the simultaneous densification and grain growth in the intermediate stage. During the final stage, fast grain growth, controlled by both gas-phase diffusion and dissolution-precipitation mechanisms, dominates over the densification.

  3. Spectrofluorimetric determination of nitric oxide at trace levels with 5,6-diamino-1,3-naphthalene disulfonic acid.

    PubMed

    Zhang, Xian; Wang, Hong; Liang, Shu-Cai; Zhang, Hua-Shan

    2002-03-01

    Based on the selective reaction that 5,6-diamino-1,3-naphthalene disulfonic acid (DANDS) traps nitric oxide (NO) in the presence of dioxygen to yield the highly fluorescent form, 1-[H]-naphthotriazole-6,8-disulfonic acid in moderately alkaline medium, a new spectrofluorimetric method for the determination of NO has been reported. The method offered the advantage of specificity, sensitivity and a simple protocol for the direct detection of NO in aqueous solution. The linear calibration range for NO was 0.04-1.44 mumoll(-1) with a 3sigma detection limit of 0.6 nmoll(-1). The proposed method has been used to monitor the release of NO from S-nitrosocysteine, a NO-releasing agent. PMID:18968522

  4. Structure-based discovery of novel 4,5,6-trisubstituted pyrimidines as potent covalent Bruton's tyrosine kinase inhibitors.

    PubMed

    Zou, Yi; Xiao, Jianhu; Tu, Zhengchao; Zhang, Yingyi; Yao, Kun; Luo, Minghao; Ding, Ke; Zhang, Yihua; Lai, Yisheng

    2016-07-01

    A series of novel 4,5,6-trisubstituted pyrimidines were designed as potent covalent Bruton's tyrosine kinase (BTK) inhibitors based on the structure of ibrutinib by using a ring-opening strategy. Among these derivatives, compound I1 exhibited the most potent inhibitory activity with an IC50 value of 0.07μM. The preliminary structure-activity relationship was discussed and the primary amino group at the C-4 position of pyrimidine was crucial for maintaining BTK activity. Furthermore, molecular dynamics simulations and binding free energy calculations were performed for three inhibitor-BTK complexes to determine the probable binding model, which provided a comprehensive guide for further structural modification and optimization. PMID:27210433

  5. Histopathological characterization of renal tubular and interstitial changes in 5/6 nephrectomized marmoset monkeys (Callithrix jacchus).

    PubMed

    Suzuki, Yui; Yamaguchi, Itaru; Myojo, Kensuke; Kimoto, Naoya; Imaizumi, Minami; Takada, Chie; Sanada, Hiroko; Takaba, Katsumi; Yamate, Jyoji

    2015-01-01

    Common marmosets (Callithrix jacchus) have become a useful animal model, particularly for development of biopharmaceuticals. While various renal failure models have been established in rodents, there is currently no acceptable model in marmosets. We analyzed the damaged renal tubules and tubulointerstitial changes (inflammation and fibrosis) of 5/6 nephrectomized (Nx) common marmosets by histopathological/immunohistochemical methods, and compared these findings to those in 5/6 Nx SD rats. In Nx marmosets and rats sacrificed at 5 and 13 weeks after Nx, variously dilated and atrophied renal tubules were seen in the cortex in common; however, the epithelial proliferating activity was much less in Nx marmosets. Furthermore, the degrees of inflammation and fibrosis seen in the affected cortex were more severe and massive in Nx marmosets with time-dependent increase. Interestingly, inflammation in Nx marmosets, of which degree was less in Nx rats, consisted of a large number of CD3-positive T cells and CD20-positive B cells (occasionally forming follicles), and a few CD68-positive macrophages. Based on these findings, lymphocytes might contribute to the progressive renal lesions in Nx marmosets. Fibrotic areas in Nx marmosets comprised myofibroblasts expressing vimentin and α-smooth muscle actin (α-SMA), whereas along with vimentin and α-SMA expressions, desmin was expressed in myofibroblasts in Nx rats. This study shows that there are some differences in renal lesions induced by Nx between marmosets and rats, which would provide useful, base-line information for pharmacology and toxicology studies using Nx marmosets. PMID:25446802

  6. Synthesis and antinociceptive activity of new 2-substituted 4-(trifluoromethyl)-5,6-dihydrobenzo[h]quinazolines.

    PubMed

    Bonacorso, Helio G; Rosa, Wilian C; Oliveira, Sara M; Brusco, Indiara; Pozza, Camila C Dalla; Nogara, Pablo A; Wiethan, Carson W; Rodrigues, Melissa B; Frizzo, Clarissa P; Zanatta, Nilo

    2016-10-01

    A useful synthetic route for an initial new series of 2-substituted 4-(trifluoromethyl)-5,6-dihydrobenzo[h]quinazolines (3), as well as an evaluation of their analgesic effect in a mice pain model, is reported. Five new quinazolines were formed from the cyclocondensation reactions of 2,2,2-trifluoro-1-(1-methoxy-1,2,3,4-tetrahydronaphthalen-2-yl)ethanone (1) with some well-known amidine salts [NH2CR(=NH)] (2), in which R=H, Me, Ph, NH2 and SMe, at a 40-70% yield. Subsequently, due to the importance of the pyrrole nucleus, a 2-(pyrrol-1-yl)quinazoline (4) was obtained through a Clauson-Kaas reaction from the respective 2-(amino)quinazoline, in a reaction with 2,5-dimethoxy-tetrahydrofuran. The analgesic evaluation demonstrated that four 5,6-dihydrobenzo[h]quinazolines (compounds of 3c (R=Ph), 3d (R=NH2), 3e (R=SMe), and 4 (R=pyrrol-1-yl); 100mg/kg, p.o.) and ketoprofen (100mg/kg, p.o.) significantly reduced the spontaneous nociception in a capsaicin-induced test. Moreover, in comparison with ketoprofen (100 and 300mg/kg, p.o.), compound 3c (30-300mg/kg, p.o.) showed an anti-hyperalgesic action in an arthritic pain model without locomotor alterations in the mice, suggesting that quinazoline 3c is a promising prototype scaffold for new analgesic drugs in the treatment of pathological pain such as that in arthritis. PMID:27561714

  7. Isolation of oligomers of 5,6-dihydroxyindole-2-carboxylic acid from the eye of the catfish.

    PubMed

    Ito, S; Nicol, J A

    1974-10-01

    The reflecting material of the tapetum lucidum of the sea catfish (Arius felis) was chromatographed on Sephadex LH-20 in methanol-dimethyl sulphoxide-formic acid. Two components were present: one, showing an absorption maximum at 330nm, was tapetal pigment; the other, at 257nm, was an associated nucleoside. The tapetal pigment was extracted in methanol-HCl and isolated by adsorption chromatography on Sephadex LH-20. It yielded a methoxy methyl ester on treatment with diazomethane, and permanganate oxidation gave pyrrole-2,3,5-tricarboxylic acid. From the information provided by u.v. and i.r. spectra of the pigment and its methoxy methyl ester, from elemental analyses and from the oxidation products, we suggest that the tapetal pigment is derived from oxidative coupling of 5,6-dihydroxyindole-2-carboxylic acid. A molecular-weight determination and chromatography of the methoxy methyl ester indicate that the pigment is a mixture of oligomers, among which the tetramers probably predominate. We consider that the monomers are joined mainly by C-C linkages at positions 4 and 7. A synthetic pigment having spectral properties nearly identical with those of the natural pigment was prepared by enzymic oxidation of 5,6-dihydroxyindole-2-carboxylic acid with mushroom tyrosinase. The identity of the tapetal pigment with the synthetic pigment was further confirmed by comparing u.v. and i.r. spectra of their methoxy methyl esters. Formation of the tapetal pigment from tyrosine and relationships of the tapetal pigment to melanin are discussed. PMID:4464851

  8. Determination of Ice Crust Thickness from Flanking Cracks Along Ridges on Europa

    NASA Technical Reports Server (NTRS)

    Billings, S. E.; Kattenhorn, S. A.

    2002-01-01

    We use equations describing the deflection of an elastic plate below a line load to estimate ice crust thickness below ridges on Europa. Using a range of elastic parameters, ice thickness is calculated to fall in the range 0.2 2.6 km. Additional information is contained in the original extended abstract.

  9. Practical immunochemical method for determination of 3,5, 6-trichloro-2-pyridinol in human urine: applications and considerations for exposure assessment.

    PubMed

    Shackelford, D D; Young, D L; Mihaliak, C A; Shurdut, B A; Itak, J A

    1999-01-01

    An analytical method is described for the quantitative determination of 3,5,6-trichloro-2-pyridinol (3,5,6-TCP) in human urine. This is the primary analyte found in urine as a result of exposure to chlorpyrifos, chlorpyrifos-methyl, triclopyr, or 3,5,6-TCP. Conjugates of 3,5,6-TCP are released from urine by acid hydrolysis. The free 3,5,6-TCP is purified using C(18) solid-phase extraction, eluting the analyte with 1-chlorobutane. An aliquot of 1-chlorobutane is placed in a vial containing Trichloropyridinol Sample Diluent and evaporated, leaving the 3,5,6-TCP in the aqueous sample diluent. The samples are assayed using the Trichloropyridinol RaPID Assay immunoassay test kit. Final results are calculated using a standard curve constructed by linear regression after a ln/Logit data transformation is performed of the concentration and the absorbance readings, respectively. The calculated lower limit of quantitation for 3,5,6-TCP in fortified control urine samples is 2. 96 ng/mL (2.96 ppb). Residues of 3,5,6-TCP determined using both immunochemical and gas chromatography with mass spectrometric detection correlate well. PMID:10563869

  10. COMPARISON OF IMMUNOASSAY AND GAS CHROMATOGRAPHY/MASS SPECTROMETRY METHODS FOR MEASURING 3,5,6-TRICHLORO-2PYRIDINOL IN MULTIPLE SAMPLE MEDIA

    EPA Science Inventory

    Two enzyme-linked immunosorbent assay (ELISA) methods were evaluated for the determination of 3,5,6-trichloro-2-pyridinol (3,5,6-TCP) in multiple sample media (dust, soil, food, and urine). The dust and soil samples were analyzed by a commercial RaPID immunoassay testing kit. ...

  11. MAPPING THE ASYMMETRIC THICK DISK. II. DISTANCE, SIZE, AND MASS OF THE HERCULES THICK DISK CLOUD

    SciTech Connect

    Larsen, Jeffrey A.; Cabanela, Juan E.; Humphreys, Roberta M. E-mail: cabanela@mnstate.edu

    2011-04-15

    The Hercules Thick Disk Cloud was initially discovered as an excess in the number of faint blue stars between Quadrants 1 and 4 of the Galaxy. The origin of the Cloud could be an interaction with the disk bar, a triaxial Thick Disk, or a merger remnant or stream. To better map the spatial extent of the Cloud along the line of sight, we have obtained multi-color UBVR photometry for 1.2 million stars in 63 fields each of approximately 1 deg{sup 2}. Our analysis of the fields beyond the apparent boundaries of the excess has already ruled out a triaxial Thick Disk as a likely explanation. In this paper, we present our results for the star counts over all of our fields, determine the spatial extent of the overdensity across and along the line of sight, and estimate the size and mass of the Cloud. Using photometric parallaxes, the stars responsible for the excess are between 1 and 6 kpc from the Sun, 0.5-4 kpc above the Galactic plane, and extend approximately 3-4 kpc across our line of sight. The Cloud is thus a major substructure in the Galaxy. The distribution of the excess along our sight lines corresponds with the density contours of the bar in the Disk, and its most distant stars are directly over the bar. We also see through the Cloud to its far side. Over the entire 500 deg{sup 2} of the sky containing the Cloud, we estimate more than 5.6 million stars and 1.9 million solar masses of material. If the overdensity is associated with the bar, it would exceed 1.4 billion stars and more than 50 million solar masses. Finally, we argue that the Hercules-Aquila Cloud is actually the Hercules Thick Disk Cloud.

  12. KM3NeT-ARCA project status and plan

    NASA Astrophysics Data System (ADS)

    Coniglione, R.

    2016-04-01

    The KM3NeT Collaboration aims at building a research infrastructure in the depths of the Mediterranean Sea hosting a cubic kilometre neutrino telescope. The KM3NeT/ARCA detector is the ideal instrument to look for high-energy neutrino sources thanks to the latitude of the detector and to the optical characteristics of the sea water. The detector latitude allows for a wide coverage of the observable sky including the region of the Galactic centre and the optical sea water properties allow for the measure of the neutrino direction with excellent angular resolution also for cascade events. The technologically innovative components of the detector and the status of construction will be presented as well as the capability it offers to discover neutrinos.

  13. Neutral winds above 200 km at high latitudes.

    NASA Technical Reports Server (NTRS)

    Meriwether, J. W.; Heppner, J. P.; Stolarik, J. D.; Wescott, E. M.

    1973-01-01

    Electrically neutral, luminous clouds are a by-product of chemical releases conducted to create barium ion clouds for the measurement of electric fields. Wind measurements provided by the motions of these clouds are particularly valuable in that the motions can be directly compared with convective ion drift motions to test the importance of ion drag forces. Motion from multiple releases between 200 and 300 km from 15 rockets launched from four high-latitude locations is analyzed in this paper. The observations in the evening and midnight hours at magnetic latitudes above 65 deg strongly suggest that in these regions ion drag is the dominant force in driving neutral winds between 200 and 300 km. In the morning sector, it is evident that neutral wind observations cannot be directly interpreted in terms of ion drag; other factors must be considered.

  14. Fact Sheet for KM200 Front-end Electronics

    SciTech Connect

    Ianakiev, Kiril Dimitrov; Iliev, Metodi; Swinhoe, Martyn Thomas

    2015-07-08

    The KM200 device is a versatile, configurable front-end electronics boards that can be used as a functional replacement for Canberra’s JAB-01 boards based on the Amptek A-111 hybrid chip, which continues to be the preferred choice of electronics for large number of the boards in junction boxes of multiplicity counters that process the signal from an array of 3He detectors. Unlike the A-111 chip’s fixed time constants and sensitivity range, the shaping time and sensitivity of the new KM200 can be optimized for demanding applications such as spent fuel, and thus could improve the safeguards measurements of existing systems where the A-111 or PDT electronics does not perform well.

  15. Remote (250 km) Fiber Bragg Grating Multiplexing System

    PubMed Central

    Fernandez-Vallejo, Montserrat; Rota-Rodrigo, Sergio; Lopez-Amo, Manuel

    2011-01-01

    We propose and demonstrate two ultra-long range fiber Bragg grating (FBG) sensor interrogation systems. In the first approach four FBGs are located 200 km from the monitoring station and a signal to noise ratio of 20 dB is obtained. The second improved version is able to detect the four multiplexed FBGs placed 250 km away, offering a signal to noise ratio of 6–8 dB. Consequently, this last system represents the longest range FBG sensor system reported so far that includes fiber sensor multiplexing capability. Both simple systems are based on a wavelength swept laser to scan the reflection spectra of the FBGs, and they are composed by two identical-lengths optical paths: the first one intended to launch the amplified laser signal by means of Raman amplification and the other one is employed to guide the reflection signal to the reception system. PMID:22164101

  16. Real Km-synthesis via generalized Popov multipliers

    NASA Technical Reports Server (NTRS)

    Chiang, R. Y.; Safonov, M. G.

    1992-01-01

    The authors refine their H-infinity control designs presented at the 1990 and 1991 American Control Conference by introducing a new real Km-synthesis technique involving the use of generalized Popov multipliers. This multiplier technique substantially reduces, and in some cases may even eliminate altogether, the conservativeness associated with traditional Km-synthesis solutions in which all uncertainties are treated as complex, even when they arise from real parameters such as the masses and spring constants in the benchmark problem. The design results demonstrate how this approach permits a very precise analysis of the intrinsic tradeoffs between robustness, performance, and control energy requirements. Also included is an open-loop H-infinity prefilter design that makes it possible to address the command response shaping issue. The design concept has been applied to the benchmark problem no. 4 and successfully removes the initial undesired transient and cuts down the percent overshoot.

  17. Quantum Cryptography Over 24 km of Underground Optical Fibers

    NASA Astrophysics Data System (ADS)

    Hughes, Richard; Luther, Gabriel; Morgan, George; Peterson, Charles; Simmons, Charles

    1997-04-01

    The secure distribution of the secret random bit sequences known as ''key'' material, is an essential precursor to their use for the encryption and decryption of confidential communications. Quantum cryptography is an emerging technology for secure key distribution with single-photon transmissions: Heisenberg's uncertainty principle ensures that an adversary can neither successfully tap the key transmissions, nor evade detection (eavesdropping raises the key error rate above a threshold value). We are performing quantum cryptography over 24-km of underground optical fiber using non-orthogonal single-photon interference states. Key material is built up by transmitting a single-photon per bit of an initial secret random sequence. A quantum-mechanically random subset of this sequence is identified, becoming the key material after a data reconciliation stage with the sender. Our experiment demonstrates that secure, real-time key generation over "open" multi-km node-to-node optical fiber communications links is feasible.

  18. Towards a 1km resolution global flood risk model

    NASA Astrophysics Data System (ADS)

    Bates, Paul; Neal, Jeff; Sampson, Chris; Smith, Andy

    2014-05-01

    Recent advances in computationally efficient numerical algorithms and new High Performance Computing architectures now make high (1-2km) resolution global hydrodynamic models a realistic proposition. However in many areas of the world the data sets and tools necessary to undertake such modelling do not currently exist. In particular, five major problems need to be resolved: (1) the best globally available terrain data (SRTM) was generated from X-band interferometric radar data which does not penetrate vegetation canopies and which has significant problems in determining ground elevations in urban areas; (2) a global river bathymetry data set does not currently exist; (3) most river channels globally are less than the smallest currently resolvable grid scale (1km) and therefore require a sub-grid treatment; (4) a means to estimate the magnitude of the T year flood at any point along the global river network does not currently exist; and (5) a large proportion of flood losses are generated by off-floodplain surface water flows which are not well represented in current hydrodynamic modelling systems. In this paper we propose solutions to each of these five issues as part of a concerted effort to develop a 1km (or better) resolution global flood hazard model. We describe the new numerical algorithms, computer architectures and computational resources used, and demonstrate solutions to the five previously intractable problems identified above. We conduct a validation study of the modelling against satellite imagery of major flooding on the Mississippi-Missouri confluence plain in the central USA before outlining a proof-of-concept regional study for SE Asia as a step towards a global scale model. For SE Asia we simulate flood hazard for ten different flood return periods over the entire Thailand, Cambodia, Vietnam, Malaysia and Laos region at 1km resolution and show that the modelling produces coherent, consistent and sensible simulations of extent and water depth.

  19. Organizations, Paradigms, and People: The Challenge of KM Interventions

    NASA Technical Reports Server (NTRS)

    Bailey, Teresa; Burton, Yvette

    1999-01-01

    This paper presents viewgraphs on Knowledge Management (KM) and how these interventions are put into practice by organizations and society. The topics include: 1) The Multiple Paradigm Tool; 2) Four Paradigms: tool for the Analyzing Organizations; 3) Assumptions About the Nature of Social Science; 4) Assumptions About the Nature of Society; 5) Schools of Sociological and Organizational Theory; 6) Meaning and Metaphors in the Four Paradigms; and 7) Possibilities and Conclusions.

  20. Kinematic characteristics of elite men's 50 km race walking.

    PubMed

    Hanley, Brian; Bissas, Athanassios; Drake, Andrew

    2013-01-01

    Race walking is an endurance event which also requires great technical ability, particularly with respect to its two distinguishing rules. The 50 km race walk is the longest event in the athletics programme at the Olympic Games. The aims of this observational study were to identify the important kinematic variables in elite men's 50 km race walking, and to measure variation in those variables at different distances. Thirty men were analysed from video data recorded during a World Race Walking Cup competition. Video data were also recorded at four distances during the European Cup Race Walking and 12 men analysed from these data. Two camcorders (50 Hz) recorded at each race for 3D analysis. The results of this study showed that walking speed was associated with both step length (r=0.54,P=0.002) and cadence (r=0.58,P=0.001). While placing the foot further ahead of the body at heel strike was associated with greater step lengths (r=0.45,P=0.013), it was also negatively associated with cadence (r= -0.62,P<0.001). In the World Cup, knee angles ranged between 175 and 186° at initial contact and between 180 and 195° at midstance. During the European Cup, walking speed decreased significantly (F=9.35,P=0.002), mostly due to a decrease in step length between 38.5 and 48.5 km (t=8.59,P=0.014). From this study, it would appear that the key areas a 50 km race walker must develop and coordinate are step length and cadence, although it is also important to ensure legal walking technique is maintained with the onset of fatigue. PMID:23679143

  1. Saqqar: A 34 km diameter impact structure in Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Kenkmann, Thomas; Afifi, Abdulkader M.; Stewart, Simon A.; Poelchau, Michael H.; Cook, Douglas J.; Neville, Allen S.

    2015-11-01

    Here we present the first proof of an impact origin for the Saqqar circular structure in northwestern Saudi Arabia (Neville et al. ), with an apparent diameter of 34 km, centered at 29°35'N, 38°42'E. The structure is formed in Cambrian-Devonian siliciclastics and is unconformably overlain by undeformed Cretaceous and Paleogene sediments. The age of impact is not well constrained and lies somewhere between 410 and 70 Ma. The subsurface structure is constrained by 2-D reflection seismic profiles and six drilled wells. First-order structural features are a central uplift that rises approximately 2 km above regional datums, surrounded by a ring syncline. The crater rim is defined by circumferential normal faults. The central uplift and ring syncline correspond to a Bouguer gravity high and an annular ring-like low, respectively. The wells were drilled within the central uplift, the deepest among them exceed 2 km depth. Sandstone core samples from these wells show abundant indicators of a shock metamorphic overprint. Planar deformation features (PDFs) were measured with orientations along (0001), {101¯3}, and less frequently along {101¯1} and {101¯4}. Planar fractures (PFs) predominantly occur along (0001) and {101¯1}, and are locally associated with feather features (FFs). In addition, some shocked feldspar grains and strongly deformed mica flakes were found. The recorded shock pressure ranges between 5 and 15 GPa. The preserved level of shock and the absence of an allochthonous crater fill suggest that Saqqar was eroded by 1-2 km between the Devonian and Maastrichtian. The documentation of unequivocal shock features proves the formation of the Saqqar structure by a hypervelocity impact event.

  2. Towards Mapping the Ocean Surface Topography at 1 KM Resolution

    NASA Astrophysics Data System (ADS)

    Fu, L. L.; Rodriguez, E.

    2006-07-01

    We propose to apply the technique of synthetic aperture radar interferometry to the measurement of ocean surface topography at spatial resolu tion approaching 1 km . The measurement w ill have wide ranging applications in oceanography , hydrology , and marine geophysics. The oceanographic and related societal applications are briefly discussed in the paper. To meet the requirements for oceanographic application s, the in strument must be flown in an orbit w ith proper samp ling of ocean tides.

  3. Towards Mapping the Ocean Surface Topography at 1 km Resolution

    NASA Technical Reports Server (NTRS)

    Fu, Lee-Lueng; Rodriquez, Ernesto

    2006-01-01

    We propose to apply the technique of synthetic aperture radar interferometry to the measurement of ocean surface topography at spatial resolution approaching 1 km. The measurement will have wide ranging applications in oceanography, hydrology, and marine geophysics. The oceanographic and related societal applications are briefly discussed in the paper. To meet the requirements for oceanographic applications, the instrument must be flown in an orbit with proper sampling of ocean tides.

  4. Calcium accumulation during sporulation of Bacillus megaterium KM.

    PubMed Central

    Hogarth, C; Ellar, D J

    1978-01-01

    Accumulation of Ca2+ in Bacilli occurs during stages IV to VI of sporulation. Ca2+ uptake into the sporangium was investigated in Bacillus megaterium KM in protoplasts prepared in stage III of sporulation and cultured to continue sporulation. These protoplasts and whole cells exhibit essentially identical Ca2+ uptake, which is compared with that of forespores isolated in stage V of sporulation. Ca2+, uptake into both sporangial protoplasts and isolated forespores occurs by Ca2+-specific carrier-mediated processes. However, protoplasts exhibit a Km value of 31 micrometer, and forespores have a Km value of 2.1 mM. Sporangial protoplasts accumulate Ca2+ against a concentration gradient. In contrast, Ca2+ uptake into isolated forespores is consistent with downhill transfer in which both rate and extent of uptake are affected by the external Ca2+ concontration. Dipicolinic acid has no effect on Ca2+ uptake by isolated forespores, apart from decreasing the external Ca2+ concentration by chelation. A model for sporulation-specific Ca2+ accumulation is proposed, in which Ca2+ is transported into the sporangium, resulting in a concentration of 3--9 mM in the mother-cell cytoplasm. This high concentration of Ca2+ enables carrier-mediated transfer down a concentration gradient into the forespore compartment, where a low free Ca2+ concentration is maintained by complexing with dipicolinic acid. PMID:103543

  5. Observations of magnetoconvection in Sunspots with 100 km resolution

    NASA Astrophysics Data System (ADS)

    Berger, T. E.; Löfdahl, M. G.; Scharmer, G.; Title, A. M.

    2003-05-01

    We present new observations from the Swedish 1-meter Solar Telescope (SST) on La Palma with ˜0.1 arcsecond ( ˜100 km) resolution: the highest resolution yet achieved in solar observations. We focus on sunspot and active region magnetoconvective phenomena using G-band 4305 Å, 4877 Å continuum, 7507 Å TiO bandhead, and Ca II 3968 Å H-line filtergram movies. The G-band data are post-processed using Joint Phase Diverse Speckle wavefront restoration to create a full diffraction limited time series. Sunspot light-bridges are shown to have dark lanes less than 300 km in width that are coherent along the entire length of the bridge. Similarly, we find elongated dark ``canals'' in plage regions, particularly near pores, that appear to be highly modified intergranular downflow lanes. The canals are less than 200 km in width and are much more coherent than intergranular lanes in non-magnetic regions, often retaining their basic structure for more than one granular turn-over time. Both the light-bridge central lane and the canals appear to be the result of highly constrained flow structure in strong magnetic field regions -- an aspect of solar magnetoconvection that has not previously been observed. This reseach was supported by funding from the Royal Swedish Academy of Sciences, a SOHO Guest Investigator subcontract to California State University Northridge, and the NASA TRACE contract NAS5-38099 at Lockheed Martin.

  6. Acceleration of barium ions near 8000 km above an aurora

    NASA Technical Reports Server (NTRS)

    Stenbaek-Nielsen, H. C.; Hallinan, T. J.; Wescott, E. M.; Foeppl, H.

    1984-01-01

    A barium shaped charge, named Limerick, was released from a rocket launched from Poker Flat Research Range, Alaska, on March 30, 1982, at 1033 UT. The release took place in a small auroral breakup. The jet of ionized barium reached an altitude of 8100 km 14.5 min after release, indicating that there were no parallel electric fields below this altitude. At 8100 km the jet appeared to stop. Analysis shows that the barium at this altitude was effectively removed from the tip. It is concluded that the barium was actually accelerated upward, resulting in a large decrease in the line-of-sight density and hence the optical intensity. The parallel electric potential in the acceleration region must have been greater than 1 kV over an altitude interval of less than 200 km. The acceleration region, although presumably auroral in origin, did not seem to be related to individual auroral structures, but appeared to be a large-scale horizontal structure. The perpendicular electric field below, as deduced from the drift of the barium, was temporally and spatially very uniform and showed no variation related to individual auroral structures passing through.

  7. Mesoscale (50-km) Boundary Layer Eddies in CASES-97

    NASA Astrophysics Data System (ADS)

    LeMone, M. A.; Grossman, R. L.; Yates, D.; Chen, F.; Ikeda, K.

    2001-05-01

    Boundery-layer eddies 50 km across are documented for the morning of 10 May 1997 during the Cooperative Atmosphere Surface Exchange Study (CASES-97). CASES-97 was held from 21 April to 21 May 1997, in the lower Walnut River Watershed in south central Kansas, to study the role of the heterogeneous surface in boundary-layer evolution. The eddies appear to be tied to terrain, with warm, upwelling air over the relatively high terrain that forms the eastern edge of the watershed, and downwelling air over the watershed. The winds on this day were 5 m/s out of the south, and there were strong horizontal contrasts in vegetation and surface fluxes, suggesting that surfact fluxes could also play a role. For comparison, we examine two other days for the presence of mesoscale eddies, 29 April (characterized by high horizontal heterogeneity of vegetation and 10 m/s southerlies), and 20 May (characterized by a uniformly green and moist surface with winds ENE at 7 m/s). 29 April had significant but rapidly-changing horizontal variability at scales greater than 10 km, but variability on 20 May was on scales less than 5 km. Estimates of the sensible heat budgets for the three days revealed a large residual for 10 May, the day with the mesoscale eddies. Calculation of the expected errors and reasonable corrections for bias errors and radiative heating did not account for the residual, leading to the hypothesis that the residual is associated with the mesoscale eddies.

  8. Satellite Observations of Antarctic Sea Ice Thickness and Volume

    NASA Technical Reports Server (NTRS)

    Kurtz, Nathan; Markus, Thorsten

    2012-01-01

    We utilize satellite laser altimetry data from ICESat combined with passive microwave measurements to analyze basin-wide changes in Antarctic sea ice thickness and volume over a 5 year period from 2003-2008. Sea ice thickness exhibits a small negative trend while area increases in the summer and fall balanced losses in thickness leading to small overall volume changes. Using a five year time-series, we show that only small ice thickness changes of less than -0.03 m/yr and volume changes of -266 cu km/yr and 160 cu km/yr occurred for the spring and summer periods, respectively. The calculated thickness and volume trends are small compared to the observational time period and interannual variability which masks the determination of long-term trend or cyclical variability in the sea ice cover. These results are in stark contrast to the much greater observed losses in Arctic sea ice volume and illustrate the different hemispheric changes of the polar sea ice covers in recent years.

  9. Two different deglaciation processes in the subtropical Pacific at MIS 5/6 and 1/2

    NASA Astrophysics Data System (ADS)

    Ujiie, Y.; Asahi, H.

    2011-12-01

    Deglaciation process is one of the results that the tropical climate forcing impact on the global changes by its large heat capacity. However, the deglacial fluctuation has poorly been explored in the tropical Pacific area due to less resolution records from the marine deposits. The Okinawa region is available to represent the high-resolution paleocenographic records of the tropical-subtropical Pacific during the late Quaternary, because of the oscillation between the Kuroshio Current continuing from the North Equatorial Current and central water of the subtropical gyre in this region. Two IMAGES cores were collected from the Okinawa Trough (under the Kuroshio Current) and Ryukyu Trench (under the central water of the subtropical gyre), respectively. Both cores MD982196 (Okinawa Trough) and MD012398 (Ryukyu Trench) covered over the records until Marine Isotope Stage (MIS) 7. Here, we aim to demonstrate the deglacial fluctuations of the surface and intermediate waters during two glacial-interglacial shifts, MIS 6 to 5 and MIS 2 to 1, based on the comprehensive analyses of the oxygen isotopes, Mg/Ca ratios of two planktic foraminiferal faunas (surface and upper intermediate species), and faunal assemblages of planktic foraminifera. The glacial-interglacial cycles were clearly confirmed in whole of the Okinawa region by the planktic δ18O curves. Surface Mg/Ca paleo-temperature showed a same trend as the δ18O curve. However, the paleo-temperature of the upper intermediate water showed unique fluctuation: temperature increased from late MIS 6 to 5e, whereas decreased from MIS 2 to Holocene. Moreover, the temperature difference (dT) between the surface and intermediate layers defined these phenomena. Fast warming of intermediate layer proitor to the deglaciation MIS 5/6 delayed a stratification of water column, while cooling of this layer make a large dT during MIS 1/2. Intriguingly, the faunal compositions of planktic foraminifera changed through the shifts of the

  10. Eggshell thickness and DDE residue levels in vlulture eggs

    USGS Publications Warehouse

    Kiff, L.F.; Peakall, D.B.; Morrison, M.L.; Wilbur, S.R.

    1983-01-01

    Post-DDT (post-1947) eggshell thickness was examined in samples of Turkey Vulture, Black Vulture, and Crested Caracara eggs from several parts of the United States. Highly significant post-DDT decreases in eggshell thickness indices of at least 10 percent were found in Turkey Vulture eggs from California, Florida, and Texas and in Black Vulture eggs from Texas and Florida. Over one-third of the Black VUlture eggs and about 30 percent of the Turkey Vulture eggs from Texas showed thinning exceeding 20 percent, a level associated with reproductive failure and population decline in other species. A strong negative correlation was found between eggshell thickness indices and DDE residues extracted from eggshell membranes in California and Texas samples of Turkey Vulture eggs and in Texas Black Vulture eggs. Crested Caracara eggs from Texas and Florida showed mean changes in eggshell thickness indices of only -5.6 and -8.2 percent, respectively, although thinning in a few eggs from both states exceeded 20 percent. Most of the post-DDT Old World vulture eggs examined appeared to be of normal thickness, with low DDE residue levels in eggshell membranes; but single eggs of Egyptian Vulture from India, Cinereous Vulture from Spain, and White-headed Vulture from Zambia showed apparent thinning. Further monitoring of vulture populations in tropical regions, where DDT use is still increasing, is recommended.

  11. Near independence of OLED operating voltage on transport layer thickness

    SciTech Connect

    Swensen, James S.; Wang, Liang; Polikarpov, Evgueni; Rainbolt, James E.; Koech, Phillip K.; Cosimbescu, Lelia; Padmaperuma, Asanga B.

    2013-01-01

    We report organic light emitting devices (OLEDs) with weak drive voltage dependence on the thickness of the hole transport layer (HTL) for thicknesses up to 1150 Å using the N,N′-Bis(naphthalen-1-yl)-N,N′-bis(phenyl)-benzidine (α-NPD) and N,N'-bis(3-methyl phenyl)-N,N'-diphenyl-[1,1'-biphenyl]-4,4'diamine (TPD), both of which have hole mobilities in the range of 2 × 10-3 cm2V-1s-1. Lower mobility HTL materials show larger operating voltage dependence on thickness. The near independence of the operating voltage for high mobility transport material thickness was only observed when the energy barrier for charge injection into the transport material was minimized. To ensure low injection barriers, a thin film of 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluorotetracyanoquinodimethane (F3TCNQ-Adl) was cast from solution onto the ITO surface. These results indicate that thick transport layers can be integrated into OLED stacks without the need for bulk conductivity doping.

  12. Comparison of orbital chemistry with crustal thickness and lunar sample chemistry

    NASA Technical Reports Server (NTRS)

    Schonfeld, E.

    1977-01-01

    A correlation between orbital chemistry (FeO, Al2O3, Mg/Al, MgO/FeO, Th) and the lunar crustal thickness is examined. The correlation suggests either lack of complete homogenization by lateral or vertical mixing, or lateral variation in the differentiation process. In addition, links between orbital chemistry and lunar sample chemistry are investigated. In regions with crustal thickness between 100 and 110 km, gabbroic anorthosites are very abundant, while in regions with crustal thickness of about 80 km anorthositic gabbros are frequent. Special attention is given to the distribution of low-potassium Fra Mauro basalt, found in high concentrations in regions with 50 to 60 km crustal thickness.

  13. Measuring Thicknesses of Wastewater Films

    NASA Technical Reports Server (NTRS)

    Schubert, F. H.; Davenport, R. J.

    1987-01-01

    Sensor determines when thickness of film of electrically conductive wastewater on rotating evaporator drum exceeds preset value. Sensor simple electrical probe that makes contact with liquid surface. Made of materials resistant to chemicals in liquid. Mounted on shaft in rotating cylinder, liquid-thickness sensor extends toward cylinder wall so tip almost touches. Sensor body accommodates probe measuring temperature of evaporated water in cylinder.

  14. Thicknesses and Volumes of Lunar Mare Basalt Flow Units

    NASA Astrophysics Data System (ADS)

    Hiesinger, H.; Head, J. W.; Wolf, U.; Jaumann, R.; Neukum, G.

    Reliable estimates of the flow thickness are crucial to our understanding of the vol- umes and the flux of lunar mare basalt volcanism. Previous work on basalt flow unit thicknesses was based on (1) shadow measurements in high-resolution images that were taken under low-sun conditions, (2) in situ observations, e.g. of Hadley Rille at the Apollo 15 landing site, and (3) on studies of the chemical kinetic aspects of lava emplacement and cooling. These studies revealed flow unit thicknesses between 1 and 96 m. Flow unit thicknesses derived from imaging data are on average ~21 m, in contrast to chemical kinetic considerations that yield thicknesses of less than 10 m. We used crater size-distribution measurements to estimate flow unit thicknesses. A large number (~60) of our crater counts show evidence for resurfacing events and these "irregularities" in the crater size distributions are used to infer the thickness of the resurfacing layer, that is the thickness of lava flows in several nearside basins. We find that the average minimum flow unit height of all investigated units is on the order of 34 m (+7/-6 m) and that the average maximum flow unit height is about 53 m (+9/- 9 m). On average the thinnest flow units were detected for units in Mare Insularum, Mare Cognitum, and Mare Nubium, thickest flows are exposed in Mare Tranquilli- tatis and Mare Humorum. Average thicknesses of flow units in Oceanus Procellarum and Mare Imbrium are slightly larger than in Mare Insularum, Mare Cognitum, and Mare Nubium, but are smaller than in Mare Tranquillitatis and Mare Humorum. The minimum average volume of all investigated flow units is~590 km3 and the maximum average volume is~940 km3. Our data indicate that the most voluminous flow units are located in Mare Humorum and Mare Tranquillitatis. As crater counts for units in Mare Serenitatis do not exhibit prominent deflections we conclude that these units have not to been resurfaced with flows thick enough to be detected in the

  15. Comparison of broadband mode arrivals at ranges of 3515 km and 5171 km in the North Pacific

    NASA Astrophysics Data System (ADS)

    Wage, Kathleen E.

    2003-04-01

    The Acoustic Thermometry of Ocean Climate (ATOC) provided an opportunity to observe signals propagating in the low-order modes of the ocean waveguide. Understanding the fluctuations of these mode signals is an important prerequisite to using them for tomography or other applications. In previous work, we characterized the cross-mode coherence and temporal variability of the low-order mode arrivals at 3515 km range [Wage et al., J. Acoust. Soc. Am. (in press)]. This study compares the mode arrivals for two different ranges : 3515 km and 5171 km, using data from the ATOC vertical line arrays at Hawaii and Kiritimati. We discuss the mode intensity and coherence statistics for each of the arrays and examine mean arrival time trends over the year-long deployment. Experimental results are compared to PE simulations of propagation through a realistic background environment perturbed by internal waves of varying strengths. The dependence of mode statistics on the path-dependent changes in the background sound speed and the parameters of the internal wave field is explored. [Work supported by an ONR Ocean Acoustics Young Faculty Award.] a)A. B. Baggeroer, T. G. Birdsall, C. Clark, J. A. Colosi, B. D. Cornuelle, D. Costa, B. D. Dushaw, M. A. Dzieciuch, A. M. G. Forbes, B. M. Howe, D. Menemenlis, J. A. Mercer, K. Metzger, W. H. Munk, R. C. Spindel, P. F. Worcester, and C. Wunsch.

  16. The 5-6 December 1991 FIRE IFO II jet stream cirrus case study: Possible influences of volcanic aerosols

    SciTech Connect

    Sassen, K.; Starr, D.O.C.; Melfi, S.H.; Spinhirne, J.D.; Poellot, M.R.; Eberhard, W.L.; Eloranta, E.W.; Hagen, D.E.; Hallett, J.

    1995-01-01

    In presenting an overview of the cirrus clouds comprehensively studied by ground-based and airborne sensors from Coffeyville, Kansas, during the 5-6 December 1992 Project FIRE IFO II case study period, evidence is provided that volcanic aerosols from the June 1991 Pinatubo eruptions may have significantly influenced the formation and maintenance of the cirrus. Following the local appearance of a spur of stratospheric volcanic debris from the subtropics, a series of jet streaks subsequently conditioned the troposphere through tropopause foldings with sulfur-based particles that became effective cloud-forming nuclei in cirrus clouds. Aerosol and ozone measurements suggest a complicated history of stratospheric-tropospheric exchanges embedded within the upper-level flow, and cirrus cloud formation was noted to occur locally at the boundaries of stratospheric aerosol-enriched layers that became humidified through diffusion, precipitation, or advective processes. Apparent cirrus cloud alterations include abnormally high ice crystal concentrations (up to {approximately}600 L{sup {minus}1}), complex radial ice crystal types, and relatively large haze particles in cirrus uncinus cell heads at temperatures between {minus}40{degrees} and {minus}50{degrees}C. Implications for volcanic-cirrus cloud climate effects and usual (nonvolcanic aerosol) jet stream cirrus cloud formation are discussed. 42 refs., 25 figs., 3 tabs.

  17. Toxicity of 3,5,6-trichloro-2-pyridinol tested at multiple stages of zebrafish (Danio rerio) development.

    PubMed

    Suvarchala, Gonuguntla; Philip, Gundala Harold

    2016-08-01

    Organophosphate compounds (OP) are widely used throughout the world for pest control. 3,5,6-Trichloro-2-pyridinol (TCP) is a primary metabolite of two OP compounds namely CP and triclopyr. This study is carried out to know whether a metabolite of parent compound is doing well or harm to biota. The potential effect of TCP was evaluated on development as destabilization of any events transpiring during embryogenesis could be deleterious. To determine this, 4-hpf zebrafish embryos were exposed to five concentrations of TCP (200, 400, 600, 800, 1000 μg/L) or 99.5 % acetone (solvent control). Different early life-stage parameters were observed at four different developmental stages, 24, 48, 72 and 96 hpf. TCP-treated embryo/larvae showed increased mortality, delay in hatching time and decrease in percentage of hatched embryos. Reduction in heartbeat rate, blood flow and body and eye pigmentation was noticed in a dose-dependent manner. Pericardial and yolk sac edema were most severe malformations caused by TCP. Along with this crooked spine/notochord, tail deformation was noticed in hatched and unhatched embryos. The malformations observed provide a good starting point for examination of the molecular mechanisms that are affected during development by TCP. Results gain significance as TCP, which is a breakdown product, appears to be more toxic during development compared to parent compound, CP (our earlier publication). PMID:27121015

  18. Determination of irradiation histories of raw beef livers using liquid chromatography-tandem mass spectrometry of 5,6-dihydrothymidine.

    PubMed

    Fukui, Naoki; Takatori, Satoshi; Kitagawa, Yoko; Okihashi, Masahiro; Ishikawa, Etsuko; Fujiyama, Takatomo; Kajimura, Keiji; Furuta, Masakazu; Obana, Hirotaka

    2017-02-01

    A method for detecting irradiation histories of raw beef livers was developed by measuring 5,6-dihydrothymidine (DHdThd) using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Liver DNA was extracted using phenol-chloroform extraction followed by precipitation in 50% ethanol. DNA was then enzymatically digested and nucleosides were purified using an OASIS MCX column. DHdThd and thymidine (dThd) contents of resulting test solutions were analyzed using LC-MS/MS. DHdThd was detected specifically after γ-irradiation. Concentration ratios of DHdThd to dThd in the test solutions increased dose-dependently after irradiation at 1.0-11.3kGy, which included the practical dose for sterilization of 2-7kGy. Dose-response curves from beef livers of individual animals almost overlapped. Thus, this method is a candidate for the detection of irradiation histories of foods from which DNA can be extracted. PMID:27596408

  19. Electrochemical biosensor based on glucose oxidase encapsulated within enzymatically synthesized poly(1,10-phenanthroline-5,6-dione).

    PubMed

    Ciftci, Hakan; Oztekin, Yasemin; Tamer, Ugur; Ramanaviciene, Almira; Ramanavicius, Arunas

    2014-11-01

    This study is focused on the investigation of electrocatalytic effect of glucose oxidase (GOx) immobilized on the graphite rod (GR) electrode. The enzyme modified electrode was prepared by encapsulation of immobilized GOx within enzymatically formed poly(1,10-phenanthroline-5,6-dione) (pPD) film. The electrochemical responses of such enzymatic electrode (pPD/GOx/GR) vs. different glucose concentrations were examined chronoamperometrically in acetate-phosphate buffer solution (A-PBS), pH 6.0, under aerobic or anaerobic conditions. Amperometric signals of the pPD/GOx/GR electrode exhibited well-defined hyperbolic dependence upon glucose concentration. Amperometric signals at 100mM of glucose were 41.17 and 32.27 μA under aerobic and anaerobic conditions, respectively. Amperometric signals of the pPD/GOx/GR electrode decreased by 6% within seven days. The pPD/GOx/GR electrode showed excellent selectivity in the presence of dopamine and uric acid. Furthermore it had a good reproducibility and repeatability with standard deviation of 9.4% and 8.0%, respectively. PMID:25454754

  20. Arabidopsis inositol 1,3,4-trisphosphate 5/6 kinase 2 is required for seed coat development.

    PubMed

    Tang, Yong; Tan, Shutang; Xue, Hongwei

    2013-07-01

    Inositol 1,3,4-trisphosphate 5/6 kinase (ITPK) phosphorylates inositol 1,3,4-trisphosphate to form inositol 1,3,4,5-tetrakisphosphate and inositol 1,3,4,6-tetrakisphosphate which can be finally transferred to inositol hexaphosphate (IP₆) and play important roles during plant growth and development. There are 4 putative ITPK members in Arabidopsis. Expression pattern analysis showed that ITPK2 is constitutively expressed in various tissues. A T-DNA knockout mutant of ITPK2 was identified and scanning electron microscopy (SEM) analysis showed that the epidermis structure of seed coat was irregularly formed in seeds of itpk2-1 mutant, resulting in the increased permeability of seed coat to tetrazolium salts. Further analysis by gas chromatography coupled with mass spectrometry of lipid polyester monomers in cell wall confirmed a dramatic decrease in composition of suberin and cutin, which relate to the permeability of seed coat and the formation of which is accompanied with seed coat development. These results indicate that ITPK2 plays an essential role in seed coat development and lipid polyester barrier formation. PMID:23595027

  1. Acid-coated Textiles (pH 5.5-6.5)--a New Therapeutic Strategy for Atopic Eczema?

    PubMed

    Jaeger, Teresa; Rothmaier, Markus; Zander, Holger; Ring, Johannes; Gutermuth, Jan; Anliker, Mark D

    2015-07-01

    Increased transepidermal water loss (TEWL) and decreased skin capacitance are characteristic features of the disturbed epidermal barrier in atopic eczema (AE). The "acid mantle", which is a slightly acidic film on the surface of the skin has led to the development of acidic emollients for skin care. In this context, the effect of citric acid-coated textiles on atopic skin has not been examined to date. A textile carrier composed of cellulose fibres was coated with a citric acid surface layer by esterification, ensuring a constant pH of 5.5-6.5. Twenty patients with AE or atopic diathesis were enrolled in the study. In a double-blind, half-side experiment, patients had to wear these textiles for 12 h a day for 14 days. On day 0 (baseline), 7 and 14, tolerability (erythema, pruritus, eczema, wearing comfort) and efficacy on skin barrier were assessed by TEWL skin hydration (corneometry/capacitance), pH and clinical scoring of eczema (SCORAD). Citric acid-coated textiles were well tolerated and improved eczema and objective parameters of skin physiology, including barrier function and a reduced skin surface pH, with potential lower pathogenic microbial colonisation. PMID:24953993

  2. The 5-6 December 1991 FIRE IFO 2 Jet Stream Cirrus Case Study: Possible Influences of Volcanic Aerosols

    NASA Technical Reports Server (NTRS)

    Sassen, Kenneth; Starr, David OC.; Mace, Gerald G.; Poellot, Michael R.; Melfi, S. H.; Eberhard, Wynn L.; Spinhirne, James D.; Eloranta, E. W.; Hagen, Donald E.; Hallett, John

    1996-01-01

    In presenting an overview of the cirrus clouds comprehensively studied by ground based and airborne sensors from Coffeyville, Kansas, during the 5-6 December 1992 First ISCCP Regional Experiment (FIRE) intensive field observation (IFO) case study period, evidence is provided that volcanic aerosols from the June 1991 Pinatubo eruptions may have significantly influenced the formation and maintenance of the cirrus. Following the local appearance of a spur of stratospheric volcanic debris from the subtropics, a series of jet streaks subsequently conditioned the troposphere through tropopause foldings with sulfur based particles that became effective cloud forming nuclei in cirrus clouds. Aerosol and ozone measurements suggest a complicated history of stratospheric-tropospheric exchanges embedded with the upper level flow, and cirrus cloud formation was noted to occur locally at the boundaries of stratospheric aerosol enriched layers that became humidified through diffusion, precipitation, or advective processes. Apparent cirrus cloud alterations include abnormally high ice crystal concentrations (up to approximately 600 L(exp. 1)), complex radial ice crystal types, and relatively large haze particles in cirrus uncinus cell heads at temperatures between -40 and -50 degrees C. Implications for volcanic-cirrus cloud climate effects and unusual (nonvolcanic) aerosol jet stream cirrus cloud formation are discussed.

  3. Comprehensive Synthesis of Monohydroxy-Cucurbit[n]urils (n = 5, 6, 7, 8): High Purity and High Conversions.

    PubMed

    Ayhan, Mehmet M; Karoui, Hakim; Hardy, Micaël; Rockenbauer, Antal; Charles, Laurence; Rosas, Roselyne; Udachin, Konstantin; Tordo, Paul; Bardelang, David; Ouari, Olivier

    2015-08-19

    We describe a photochemical method to introduce a single alcohol function directly on cucurbit[n]urils (n = 5, 6, 7, 8) with conversions of the order 95-100% using hydrogen peroxide and UV light. The reaction was easily scaled up to 1 g for CB[6] and CB[7]. Spin trapping of cucurbituril radicals combined with MS experiments allowed us to get insights about the reaction mechanism and characterize CB[5], CB[6], CB[7], and CB[8] monofunctional compounds. Experiments involving (18)O isotopically labeled water indicated that the mechanism was complex and showed signs of both radical and ionic intermediates. DFT calculations allowed estimating the Bond Dissociation Energies (BDEs) of each hydrogen atom type in the CB series, providing an explanation of the higher reactivity of the "equatorial" C-H position of CB[n] compounds. These results also showed that, for CB[8], direct functionalization on the cucurbituril skeleton is more difficult because one of the methylene hydrogen atoms (Hb) has its BDE lowering within the series and coming close to that of Hc, thus opening the way to other types of free radicals generated on the CB[8] skeleton leading to several side products. Yet CB[5]-(OH)1 and CB[8]-(OH)1, the first CB[8] derivative, were obtained in excellent yields thanks to the soft method presented here. PMID:26197228

  4. Magnetic properties of YMn{sub x}Al{sub 12{minus}x}(x = 4,5,6)

    SciTech Connect

    Coldea, M.; Coldea, R.; Borodi, G.

    1994-03-01

    Magnetic susceptibility of YMn{sub x}Al{sub 12{minus}x} (x=4,5,6) with ThMn{sub 12} structure was measured at temperatures 90K to 900K. These compounds show varied magnetic behaviors depending upon the relative abundance of Mn atoms in the 8f, 8j and 8i crystallographic sites. In the high temperature range, the temperature dependence of the susceptibility is of the Curie-Weiss type. The occurrence of a Mn moment in YMn{sub 4}Al{sub 8} and YMn{sub 8}Al{sub 6} is strongly correlated with the critical value d{approx}2.6{angstrom} of MD-Mn distance below which the Mn moment collapses. In YMn{sub 8}Al{sub 6} both the magnetic and the nonmagnetic Mn atoms were observed to coexist. It has been revealed that the magnetic character of Mn moment in the 8f sites of these two compounds changes from an itinerant electron type to a local moment type with increasing temperature. A transition to a spin glass state at low temperatures for YMn{sub 5}Al{sub 7}, was suggested.

  5. Lipoic acid does not improve renal function markers in 5/6 nephrectomy model: possible role of Nrf2 inactivation.

    PubMed

    Lo, Sze M; Dal Lin, Fernando T; Soares, Maria F; Hauser, Aline B; Pecoits-Filho, Roberto; Nakao, Lia S

    2016-05-01

    Chronic kidney disease (CKD) progression and complications are associated with increased oxidative stress, as well as with Nrf2 inactivation. Lipoic acid (LA) has been considered an inducer of Nrf2 antioxidant response. We tested whether oral administration of LA provides beneficial effects in experimental CKD in rats. Wistar rats underwent 5/6 nephrectomy (CKD group) or sham laparotomy. Seven days later, CKD group was divided into three subgroups that received: (i) LA continuously in the drinking water (100 mg/kg/day), (ii) LA by gavage every other day (100 mg/kg), or (iii) no LA treatment. LA treatment lasted until day 60. Plasma urea and creatinine, 24 h-proteinuria, glomerulosclerosis, interstitial fibrosis/tubular atrophy, and Nrf2 activation were analyzed. All parameters measured were significantly altered in the untreated CKD group, compared with the sham group, as expected. Oral LA administration, either in the drinking water or by gavage, did not improve significantly any parameter, comparing the treated-groups with the untreated CKD group. These results indicate that oral LA administration for 53 days was ineffective to reactivate Nrf2 in the remnant kidney of uremic rats, likely preventing improvements in biochemical and histopathological markers of renal function. PMID:26904958

  6. Improved propionic acid and 5,6-dimethylbenzimidazole control strategy for vitamin B12 fermentation by Propionibacterium freudenreichii.

    PubMed

    Wang, Peng; Zhang, Zhiwei; Jiao, Youjing; Liu, Shouxin; Wang, Yunshan

    2015-01-10

    An efficient fermentation-strengthening approach was developed to improve the anaerobic production of vitamin B12 by cultivation process optimization with Propionibacterium freudenreichii. The effects of the byproduct propionic acid and the precursor 5,6-dimethylbenzimidazole (DMB) on vitamin B12 biosynthesis were investigated. Byproduct inhibition experiments showed that maintaining propionic acid concentration in broth below 10-20 g/L in the early stage and 20-30 g/L in the late stage can efficiently improve vitamin B12 biosynthesis. Batch fermentation indicated the occurrence of feed-back inhibition in intracellular intermediate biosynthesis. In addition, the incorporation of the precursor DMB depended on the fermentation level of the vitamin B12 intermediate. High vitamin B12 concentration (58.8 mg/L) and production (0.37 mg/g) were obtained with an expanded bed adsorption bioreactor by using the propionic acid and DMB control method. The optimum concentration and production of 59.5 and 0.59 mg/L h for vitamin B12 production were respectively achieved after five continuous batches. PMID:25455014

  7. Synthesis and anticancer activities of 5,6,7-trimethoxy-N-phenyl(ethyl)-4-aminoquinazoline derivatives.

    PubMed

    Zhang, Ying; Jin, Linhong; Xiang, Hongmei; Wu, Jian; Wang, Peiyi; Hu, Deyu; Xue, Wei; Yang, Song

    2013-08-01

    A series of 5,6,7-trimethoxy-N-phenyl(ethyl)-4-aminoquinazoline compounds was prepared by microwave irradiation and conventional heating methods. Compounds 6p, 6q, and 6x strongly inhibited extracellular regulated kinase1/2 (ERK1/2) phosphorylation induced by epidermal growth factor (EGF) at 1.28 μM in PC3 cells. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed that all compounds had certain anticancer activities, and the IC₅₀ values of 6x were 6.2 ± 0.9, 3.2 ± 0.1, and 3.1 ± 0.1 μM against PC3, BGC823, and Bcap37 cells, respectively. Acridine orange/ethidium bromide staining, Hoechst 33258 staining, DNA ladder, and flow cytometry analyses revealed that 6x induced cell apoptosis in PC3 cells, with apoptosis ratios of 11.6% at 1 μM and 31.8% at 10 μM after 72 h. PMID:23811258

  8. Electron density determinations of stellar coronae using Fe XXI ndarrow2p (n=3,4,5,6) transitions

    NASA Astrophysics Data System (ADS)

    Chen, H.; Beiersdorfer, P.; Liedahl, D. A.; Bitter, M.; Brown, G. V.; Kahn, S. M.

    2002-04-01

    The idea of using L-shell iron spectroscopic information to infer the electron density has become very attractive following the availability of high-resolution data measured by current x-ray observatories. Following suggestions in [1], we developed the n darrow2p line (n=3,4,5,6) intensities in Fe XXI as a diagnostic that is sensitive to densities near 10^13 cm-3 and applied it to Chandra observations of HR1099. HULLAC code predictions of the density sensitivity were checked with the Livermore EBIT-II ion trap for low densities. Checks at high density are in progress at the Princeton NSTX tokamak. For HR1099 we find a density of about 2 to 8 x 10^13 cm-3. This is in the range of 10^12 - 10^13 cm-3 that was determined using the Fe XXI EUV line ratios (102/128 ÅÅobserved with EUVE [2]. This work was performed under the auspice of DOE by UC-LLNL under contract W-7405-Eng-48 and supported by DOE OFES and by NASA SARA grants to LLNL, GSFC, PPPL and Columbia University.\\$[1]. Wargelin, et al, APJ 496 (1998). [2]. Ayres,et al, APJ, 549, (2001) 554)

  9. Rapid and sensitive spectrofluorimetric determination of enrofloxacin, levofloxacin and ofloxacin with 2,3,5,6-tetrachloro- p-benzoquinone

    NASA Astrophysics Data System (ADS)

    Ulu, Sevgi Tatar

    2009-06-01

    A highly sensitive spectrofluorimetric method was developed for the first time, for the analysis of three fluoroquinolones (FQ) antibacterials, namely enrofloxacin (ENR), levofloxacin (LEV) and ofloxacin (OFL) in pharmaceutical preparations through charge transfer (CT) complex formation with 2,3,5,6-tetrachloro- p-benzoquinone (chloranil,CLA). At the optimum reaction conditions, the FQ-CLA complexes showed excitation maxima ranging from 359 to 363 nm and emission maxima ranging from 442 to 488 nm. Rectilinear calibration graphs were obtained in the concentration range of 50-1000, 50-1000 and 25-500 ng mL -1 for ENR, LEV and OFL, respectively. The detection limit was found to be 17 ng mL -1 for ENR, 17 ng mL -1 for LEV, 8 ng mL -1 for OFL, respectively. Excipients used as additive in commercial formulations did not interfere in the analysis. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The proposed method was successfully applied to the analysis of pharmaceutical preparations. The results obtained were in good agreement with those obtained using the official method; no significant difference in the accuracy and precision as revealed by the accepted values of t- and F-tests, respectively.

  10. Phosphorylation regulates proteolytic efficiency of TEV protease detected by a 5(6)-carboxyfluorescein-pyrene based fluorescent sensor.

    PubMed

    He, Yao-Hui; Li, Yan-Mei; Chen, Yong-Xiang

    2016-04-01

    TEV protease is of great importance for in vitro and in vivo site-specific cleavage of proteins. The proteolytic efficiency of TEV protease is often regulated by mutation of the substrate, which is irreversible and hard to be modulated. Herein, a facile and reversible method, based on phosphorylation in the substrate, is developed to regulate the cleavage capability of TEV protease. Phosphorylation at P3 tyrosine hinders the recognition of TEV protease to the substrate by using a robust fluorescent protease sensor. Moreover, the phosphate group can be easily removed by alkaline phosphatases for recovering the proteolytic efficiency of TEV protease. Additionally, 5(6)-carboxyfluorescein and pyrene have been used as high-efficiency mutual fluorophore-quencher pair in the peptide-based protease sensor for the first time, which provides a chance to simultaneously monitor the cleavage process in two respective fluorescence channels. Further studies indicated both dynamic and static components contributing to the mutual quenching system. The phosphorylation-regulated TEV protease proteolysis system can be used in conditional cleavage of protein or peptide tag. PMID:26838417

  11. Subduction of European continental crust to 70 km depth imaged in the Western Alps

    NASA Astrophysics Data System (ADS)

    Paul, Anne; Zhao, Liang; Guillot, Stéphane; Solarino, Stefano

    2015-04-01

    amplitude negative-polarity converted phases (generated by downward velocity decreases) beneath the Dora Maira massif and the westernmost Po plain. Records in the Po plain display a strong but intricate converted signal from the Adria Moho between 10 and 35 km depth. We propose that the negative-polarity converted phases are generated by downward decreasing velocity between, from top to bottom, the Ivrea body of mantle origin, a thick wedge of HP/UHP metamorphic rocks and the European lower crust. Our receiver-function section thus displays the classical wedge-shaped image of the Alpine crust, but with the deepest European Moho ever recorded (70-75 km), and clear evidence of continental subduction of the European lower crust beneath the Ivrea mantle body (and possibly Adria mantle) as a negative-polarity converted phase indicative of an inverted Moho. Based on our seismic section, complemented with seismic and gravity modelling and geological arguments, we propose a new crustal-scale cross-section of the Western Alps.

  12. Exhumation of an unusually large, ~3000 km3 coherent block of oceanic crust from >40 km depth

    NASA Astrophysics Data System (ADS)

    Barrow, Wendy; Metcalf, Rodney; Fairhurst, Robert

    2010-05-01

    The Central Metamorphic terrane (CMt) is an unusually large (~3000 km3) coherent block of mid-ocean ridge (MOR) metabasites; the first one of this scale reported with eclogite facies relicts, decompression assemblages, and thermobarometry indicating exhumation of the entire block from >40 km depth. The CMt is exposed in the eastern Klamath Mountains of northern California and is dominantly an amphibolite facies metabasite which represents remnant oceanic crust subducted in a mid-Paleozoic Pacific-type margin. Thermochronology indicates that the CMt was subsequently exhumed along the Trinity fault during an early Permian extensional event. Newly discovered relict textures with new thermobarometry results suggest the CMt metabasites record the retrograde segment of the P-T-deformation-time path during exhumation from hornblende eclogite facies P-T conditions. A decompression and cooling sequence consisting of rutile cores within ilmenite crystals mantled by titanite is observed in CMt amphibolite samples. Zr-in-rutile thermometry combined with experimental data for rutile stability in metabasites suggests that relict rutile crystals preserve early P-T conditions of ~600° C and >1.3 GPa. Transition from eclogite facies is further supported by ilmenite-plagioclase-amphibole symplectites suggesting replacement of garnet or omphacite during decompression. The dominant mineral assemblages and metamorphic fabrics indicate dynamic recrystallization of metabasites during declining P-T conditions through amphibolite - epidote amphibolite facies. Exhumation via extension along the Trinity fault is suggested by the coplanar relationship between metabasite decompression-related deformation fabrics and the Trinity fault. We propose that subducted oceanic crust (CMt) was subsequently exhumed as a large coherent block from depths >40 km. This is significant because the conversion of mafic oceanic crust to eclogite produces the negative buoyancy (relative to mantle peridotite) that

  13. Mapping the global land surface using 1 km AVHRR data

    USGS Publications Warehouse

    Lauer, D.T.; Eidenshink, J.C.

    1998-01-01

    The scientific requirements for mapping the global land surface using 1 km advanced very high resolution radiometer (AVHRR) data have been set forth by the U.S. Global Change Research Program; the International Geosphere Biosphere Programme (IGBP); The United Nations; the National Oceanic and Atmospheric Administration (NOAA); the Committee on Earth Observations Satellites; and the National Aeronautics and Space Administration (NASA) mission to planet Earth (MTPE) program. Mapping the global land surface using 1 km AVHRR data is an international effort to acquire, archive, process, and distribute 1 km AVHRR data to meet the needs of the international science community. A network of AVHRR receiving stations, along with data recorded by NOAA, has been acquiring daily global land coverage since April 1, 1992. A data set of over 70,000 AVHRR images is archived and distributed by the United States Geological Survey (USGS) EROS Data Center, and the European Space Agency. Under the guidance of the IGBP, processing standards have been developed for calibration, atmospheric correction, geometric registration, and the production of global 10-day maximum normalized difference vegetation index (NDVI) composites. The major uses of the composites are for the study of surface vegetation condition, mapping land cover, and deriving biophysical characteristics of terrestrial ecosystems. A time-series of 54 10-day global vegetation index composites for the period of April 1, 1992 through September 1993 has been produced. The production of a time-series of 33 10-day global vegetation index composites using NOAA-14 data for the period of February 1, 1995 through December 31, 1995 is underway. The data products are available from the USGS, in cooperation with NASA's MTPE program and other international organizations.

  14. An evaluation of the global 1-km AVHRR land dataset

    USGS Publications Warehouse

    Teillet, P.M.; El Saleous, N.; Hansen, M.C.; Eidenshink, Jeffery C.; Justice, C.O.; Townshend, J.R.G.

    2000-01-01

    This paper summarizes the steps taken in the generation of the global 1-km AVHRR land dataset, and it documents an evaluation of the data product with respect to the original specifications and its usefulness in research and applications to date. The evaluation addresses data characterization, processing, compositing and handling issues. Examples of the main scientific outputs are presented and options for improved processing are outlined and prioritized. The dataset has made a significant contribution, and a strong recommendation is made for its reprocessing and continuation to produce a long-term record for global change research.

  15. Microorganisms cultured from stratospheric air samples obtained at 41 km.

    PubMed

    Wainwright, M; Wickramasinghe, N C; Narlikar, J V; Rajaratnam, P

    2003-01-21

    Samples of air removed from the stratosphere, at an altitude of 41 km, were previously found to contain viable, but non-cultureable bacteria (cocci and rods). Here, we describe experiments aimed at growing these, together with any other organisms, present in these samples. Two bacteria (Bacillus simplex and Staphylococcus pasteuri) and a single fungus, Engyodontium album (Limber) de Hoog were isolated from the samples. Although the possibility of contamination can never be ruled out when space-derived samples are studied on earth, we are confident that the organisms originated from the stratosphere. Possible mechanisms by which these organisms could have attained such a height are discussed. PMID:12583913

  16. A Proposed International Tropical Reference Atmosphere up to 80 Km

    NASA Technical Reports Server (NTRS)

    Ananthasayanam, M. R.; Narasimha, R.

    1985-01-01

    Based upon previous standard reference atmosphere, which are usually inspired by temperature regions, a proposal is made for an International Tropical Reference Atmosphere (ITRA). It is a modification of the Indian Standard Tropical Atmosphere (ISIA). The data at the available longitudinal stations in the tropics was considered in formulating the present proposal. Balloonsonde, rocketsonde, and grenade and falling sphere data was used in developing the temperature data bse fromt he stratosphere, troposphere and mesosphere. Temperature distribution and mean sea level pressures up to 80 km altitudes is discussed.

  17. PMT characterisation for the KM3NeT project

    NASA Astrophysics Data System (ADS)

    Herold, B.; Kalekin, O.; Reubelt, J.; KM3NeT Consortium

    2011-05-01

    The KM3NeT project aims to design and to construct at least a cubic kilometre scale neutrino telescope in the Mediterranean Sea. The main task is to instrument this deep-sea water volume with optical modules, each housing one or several photomultiplier tubes. Three-, 8- and 10-in. PMTs from ET Enterprises, Hamamatsu and MELZ-FEU have been investigated as candidates for the telescope's optical modules. Various parameters of these photomultiplier tubes have been measured in a test bench at the Erlangen Centre for Astroparticle Physics. These results are presented.

  18. EVLA/NMA: Within and Beyond the 21-km Radius

    NASA Astrophysics Data System (ADS)

    Durand, Steve; Romney, Jonathan D.

    NRAO's Expanded Very Large Array (EVLA) project is being implemented in two phases. Each involves extremely wide- bandwidth data transmission over optical fibers, but the two phases necessarily involve quite different approaches to the required fiber infrastructure, which make for an interesting contrast. Phase 1, formally called the "Ultrasensitive Array", involves replacing almost all of the existing electronics, leaving only the mechanical and track infrastructure of the VLA. The data transmission system being implemented for Phase 1 uses dedicated optical fibers, currently being buried at the VLA site. Twelve standard single-mode fibers will run from each of 72 antenna pads to the central building. One of these fibers will support the wideband data transmission system, using a dense wavelength division multiplexing technique to carry a bandwidth of 96 Gbps (120 Gbps formatted) per antenna. Fibers from the 27 active antenna pads will carry a total bandwidth of 2.6 Tbps. The longest of these fibers will extend the full 21- km length of each arm. Phase 2 will add the "New Mexico Array". Eight new stations will be built, and the electronics of the VLBA Pie Town and Los Alamos stations will be upgraded, to create a medium-resolution array, with sensitivity even higher than Phase 1. All ten NMA stations will lie within the State of New Mexico. The new antennas will range as far as 265 km from the VLA site, and will be located so as to facilitate access to existing fiber trunks installed, primarily, by rural telephone companies. These trunks include numerous unused fibers which, it is anticipated, can be leased economically. The longest fiber run from the VLA is 480 km. The same 96-Gbps total bandwidth per station will be supported, with the same underlying sub-band structure. Signals from up to three NMA stations will be multiplexed onto a single fiber in the existing trunks. This will limit the total length of fiber which must be leased or acquired to about 1240 km.

  19. The 10 km/s, 10 kg railgun

    SciTech Connect

    Marshall, R.A. ); Barber, J.P. )

    1991-01-01

    In this paper the system design for a railgun powered by capacitor-based energy stores distributed along its length is presented. It is assumed that it is required to accelerate a mass of 10kg to a velocity of 10 km/s. Parameters for the railgun and its energy stores are derived and the performance of the system is computed with particular attention being paid to the efficiency with which store energy is converted to launch package kinetic energy. It is shown that efficiencies of 90 percent can be expected from a properly designed system.

  20. The relational database system of KM3NeT

    NASA Astrophysics Data System (ADS)

    Albert, Arnauld; Bozza, Cristiano

    2016-04-01

    The KM3NeT Collaboration is building a new generation of neutrino telescopes in the Mediterranean Sea. For these telescopes, a relational database is designed and implemented for several purposes, such as the centralised management of accounts, the storage of all documentation about components and the status of the detector and information about slow control and calibration data. It also contains information useful during the construction and the data acquisition phases. Highlights in the database schema, storage and management are discussed along with design choices that have impact on performances. In most cases, the database is not accessed directly by applications, but via a custom designed Web application server.

  1. 157km BOTDA with pulse coding and image processing

    NASA Astrophysics Data System (ADS)

    Qian, Xianyang; Wang, Zinan; Wang, Song; Xue, Naitian; Sun, Wei; Zhang, Li; Zhang, Bin; Rao, Yunjiang

    2016-05-01

    A repeater-less Brillouin optical time-domain analyzer (BOTDA) with 157.68km sensing range is demonstrated, using the combination of random fiber laser Raman pumping and low-noise laser-diode-Raman pumping. With optical pulse coding (OPC) and Non Local Means (NLM) image processing, temperature sensing with +/-0.70°C uncertainty and 8m spatial resolution is experimentally demonstrated. The image processing approach has been proved to be compatible with OPC, and it further increases the figure-of-merit (FoM) of the system by 57%.

  2. One-Hundred-km-Scale Basins on Enceladus: Evidence for an Active Ice Shell

    NASA Technical Reports Server (NTRS)

    Schenk, Paul M.; McKinnon, William B.

    2009-01-01

    Stereo-derived topographic mapping of 50% of Enceladus reveals at least 6 large-scale, ovoid depressions (basins) 90-175 km across and 800-to-1500 m deep and uncorrelated with geologic boundaries. Their shape and scale are inconsistent with impact, geoid deflection, or with dynamically supported topography. Isostatic thinning of Enceladus ice shell associated with upwellings (and tidally-driven ice melting) can plausibly account for the basins. Thinning implies upwarping of the base of the shell of 10-20 km beneath the depressions, depending on total shell thickness; loss of near-surface porosity due to enhanced heat flow may also contribute to basin lows. Alternatively, the basins may overly cold, inactive, and hence denser ice, but thermal isostasy alone requires thermal expansion more consistent with clathrate hydrate than water ice. In contrast to the basins, the south polar depression (SPD) is larger (350 wide) and shallower (0.4-to-0.8 km deep) and correlates with the area of tectonic deformation and active resurfacing. The SPD also differs in that the floor is relatively flat (i.e., conforms roughly to the global triaxial shape, or geoid) with broad, gently sloping flanks. The relative flatness across the SPD suggests that it is in or near isostatic equilibrium, and underlain by denser material, supporting the polar sea hypothesis of Collins and Goodman. Near flatness is also predicted by a crustal spreading origin for the "tiger stripes (McKinnon and Barr 2007, Barr 2008); the extraordinary, high CIRS heat flows imply half-spreading rates in excess of 10 cm/yr, a very young surface age (250,000 yr), and a rather thin lithosphere (hence modest thermal topography). Topographic rises in places along the outer margin of the SPD correlate with parallel ridges and deformation along the edge of the resurfaced terrain, consistent with a compressional, imbricate thrust origin for these ridges, driven by the spreading.

  3. Wall thickness design and corrosion management

    SciTech Connect

    Gestel, W.M. van; Guijt, J.

    1994-12-31

    In 1995, Norske Shell will install two 36-in. sweet wet gas pipe lines in the Norwegian sector of the North Sea. The lines cross the Norwegian trench with water depths up to 350 meter. For the last 3.5 km. of the route the pipelines will be laid in a tunnel which will be flooded after construction. The two lines will transport largely untreated well fluids from the Troll field to an onshore processing plant at Kollsness, North of Bergen. From there sales gas will be transported to the continent via the Furopipe and Zeepipe systems. Gas contracts covering 30 years have been concluded with gas utilities on the continent. The maximum wall thickness that could be installed was limited by the capabilities of the present generation of lay barges and pipe mill capacities. The over-thickness, i.e. beyond that what is required for pressure containment and external collapse, is available as corrosion allowance. The paper discusses a novel probabilistic approach to define the corrosion control measures. The corrosion control system is based on the injection of glycol for corrosion mitigation and inspection by ultrasonic internal smart pigs, which in combination with identified fall back options, ensure a minimum 50 year service life.

  4. How thick are lunar mare basalts

    NASA Technical Reports Server (NTRS)

    Hoerz, F.

    1978-01-01

    It is argued that De Hon's estimates of the thickness of lunar mare basalts, made by analyzing 'ghost' craters on mare surfaces, were inflated as the result of the crater morphometric data of Pike (1977) to reconstruct rim heights of degraded craters. Crater rim heights of 82 randomly selected highland craters of various states of degradation were determined, and median rim height was compared to that of corresponding fresh impact structures. Results indicate that the thickness estimates of De Hon may be reduced by a factor of 2, and that the total volume of mare basalt produced throughout lunar history could be as little as 1-2 million cubic kilometers. A survey of geochemical and petrographic evidence indicates that lateral transport of regolith components over distances of much greater than 10 km is relatively inefficient; it is suggested that vertical mixing of a highland substrate underlying the basaltic fill may have had a primordial role in generating the observed mare width distributions and high concentrations of exotic components in intrabasin regoliths.

  5. Analysis of sex differences in open-water ultra-distance swimming performances in the FINA World Cup races in 5 km, 10 km and 25 km from 2000 to 2012

    PubMed Central

    2014-01-01

    Background The present study investigated the changes in swimming speeds and sex differences for elite male and female swimmers competing in 5 km, 10 km and 25 km open-water FINA World Cup races held between 2000 and 2012. Methods The changes in swimming speeds and sex differences across years were analysed using linear, non-linear, and multi-level regression analyses for the annual fastest and the annual ten fastest competitors. Results For the annual fastest, swimming speed remained stable for men and women in 5 km (5.50 ± 0.21 and 5.08 ± 0.19 km/h, respectively), in 10 km (5.38 ± 0.21 and 5.05 ± 0.26 km/h, respectively) and in 25 km (5.03 ± 0.32 and 4.58 ± 0.27 km/h, respectively). In the annual ten fastest, swimming speed remained constant in 5 km in women (5.02 ± 0.19 km/h) but decreased significantly and linearly in men from 5.42 ± 0.03 km/h to 5.39 ± 0.02 km/h. In 10 km, swimming speed increased significantly and linearly in women from 4.75 ± 0.01 km/h to 5.74 ± 0.01 km/h but remained stable in men at 5.36 ± 0.21 km/h. In 25 km, swimming speed decreased significantly and linearly in women from 4.60 ± 0.06 km/h to 4.44 ± 0.08 km/h but remained unchanged at 4.93 ± 0.34 km/h in men. For the annual fastest, the sex difference in swimming speed remained unchanged in 5 km (7.6 ± 3.0%), 10 km (6.1 ± 2.5%) and 25 km (9.0 ± 3.7%). For the annual ten fastest, the sex difference remained stable in 5 km at 7.6 ± 0.6%, decreased significantly and linearly in 10 km from 7.7 ± 0.7% to 1.2 ± 0.3% and increased significantly and linearly from 4.7 ± 1.4% to 9.6 ± 1.5% in 25 km. Conclusions To summarize, elite female open-water ultra-distance swimmers improved in 10 km but impaired in 25 km leading to a linear decrease in sex difference in 10 km and a linear increase in sex difference in 25 km. The linear changes in sex differences

  6. Application of Environmental Seismic Intensity scale (ESI 2007) to Krn Mountains 1998 Mw = 5.6 earthquake (NW Slovenia) with emphasis on rockfalls

    NASA Astrophysics Data System (ADS)

    Gosar, A.

    2012-05-01

    The 12 April 1998 Mw = 5.6 Krn Mountains earthquake with a maximum intensity of VII-VIII on the EMS-98 scale caused extensive environmental effects in the Julian Alps. The application of intensity scales based mainly on damage to buildings was limited in the epicentral area, because it is a high mountain area and thus very sparsely populated. On the other hand, the effects on the natural environment were prominent and widespread. These facts and the introduction of a new Environmental Seismic Intensity scale (ESI 2007) motivated a research aimed to evaluate the applicability of ESI 2007 to this event. All environmental effects were described, classified and evaluated by a field survey, analysis of aerial images and analysis of macroseismic questionnaires. These effects include rockfalls, landslides, secondary ground cracks and hydrogeological effects. It was realized that only rockfalls (78 were registered) are widespread enough to be used for intensity assessment, together with the total size of affected area, which is around 180 km2. Rockfalls were classified into five categories according to their volume. The volumes of the two largest rockfalls were quantitatively assessed by comparison of Digital Elevation Models to be 15 × 106 m3 and 3 × 106 m3. Distribution of very large, large and medium size rockfalls has clearly defined an elliptical zone, elongated parallel to the strike of the seismogenic fault, for which the intensity VII-VIII was assessed. This isoseismal line was compared to the tentative EMS-98 isoseism derived from damage-related macroseismic data. The VII-VIII EMS-98 isoseism was defined by four points alone, but a similar elongated shape was obtained. This isoseism is larger than the corresponding ESI 2007 isoseism, but its size is strongly controlled by a single intensity point lying quite far from others, at the location where local amplification is likely. The ESI 2007 scale has proved to be an effective tool for intensity assessment in

  7. Near-Cloud Aerosol Properties from the 1 Km Resolution MODIS Ocean Product

    NASA Technical Reports Server (NTRS)

    Varnai, Tamas; Marshak, Alexander

    2014-01-01

    This study examines aerosol properties in the vicinity of clouds by analyzing high-resolution atmospheric correction parameters provided in the MODIS (Moderate Resolution Imaging Spectroradiometer) ocean color product. The study analyzes data from a 2 week long period of September in 10 years, covering a large area in the northeast Atlantic Ocean. The results indicate that on the one hand, the Quality Assessment (QA) flags of the ocean color product successfully eliminate cloud-related uncertainties in ocean parameters such as chlorophyll content, but on the other hand, using the flags introduces a sampling bias in atmospheric products such as aerosol optical thickness (AOT) and Angstrom exponent. Therefore, researchers need to select QA flags by balancing the risks of increased retrieval uncertainties and sampling biases. Using an optimal set of QA flags, the results reveal substantial increases in optical thickness near clouds-on average the increase is 50% for the roughly half of pixels within 5 km from clouds and is accompanied by a roughly matching increase in particle size. Theoretical simulations show that the 50% increase in 550nm AOT changes instantaneous direct aerosol radiative forcing by up to 8W/m2 and that the radiative impact is significantly larger if observed near-cloud changes are attributed to aerosol particles as opposed to undetected cloud particles. These results underline that accounting for near-cloud areas and understanding the causes of near-cloud particle changes are critical for accurate calculations of direct aerosol radiative forcing.

  8. How to evacuate 10 km3 of mud: saturate with gas and decrease the pressure!

    NASA Astrophysics Data System (ADS)

    Imbert, Patrice; Geiss, Bernard; Fatjó de Martín, Núria

    2014-06-01

    The crest of the Absheron anticline in the South Caspian Basin at a few hundred meters below the present seafloor shows a subcircular depression about 8 km in diameter and 200 m deep, bounded by steep edges dipping 15° to 45° into it. The depression and the surrounding series are respectively filled and overlain by a regional mass-transport deposit (MTD) 150 m thick outside the depression and 300 m thick inside, composed mostly of extensional blocks. Geometric and stratigraphic analyses indicate that 150 m of initially deposited sediment were removed from a closed area after burial. Seismic evidence of shallow gas accumulations below the crater-like feature suggests that gas likely played a significant role in its development. The model proposed for the emplacement of the crater is that the gas-bearing cover of a shallow gas reservoir underwent exsolution when its overburden thinned during an episode of extensional slope failure. This resulted in loss of resistance to shear and evacuation of the gas-bearing sediment, likely at the shearing base of the failed mass. This evacuation feature is considered an example where the presence of gas locally governs the morphology of an MTD. The interpreted process shows a positive feedback between slope failure and loss of strength at the base of the resulting MTD.

  9. Infrared emission from the atmosphere above 200 km

    NASA Technical Reports Server (NTRS)

    Simpson, J. P.

    1976-01-01

    The infrared radiation over the range from 4 to 1000 microns from atoms and molecules in the earth's atmosphere, between 200 and 400 km, was calculated. Only zenith lines of sight were considered. The excitation of the atoms and molecules is due to collisions with other molecules and to absorption of radiation from the earth and sun. In some cases, the abundances of the molecules had to be estimated. The most important lines are the forbidden lines from atomic oxygen at 63.1 and 147 micron, and the vibration-rotation band of nitric oxide at 5.3 micron. These lines can have intensities as high as a few times 0.001 ergs/sq cm/sec/steradian at 200 km altitude. In addition, the vibration-rotation bands of NO(+) at 4.3 micron and CO at 4.7 micron and the pure rotation lines of NO and NO(+) could be detected by infrared telescopes in space.

  10. Km typing with PCR: application to population screening.

    PubMed Central

    Kurth, J H; Bowcock, A M; Erlich, H A; Nevo, S; Cavalli-Sforza, L L

    1991-01-01

    The immunoglobulin kappa light chain (IgK) locus may play a significant role in the pathology of both infectious and autoimmune diseases. Most of the work on IgK genetics has been conducted using immunological techniques for allelic typing and sequence analysis. This is restricted by availability of reagents and can be both expensive and time-consuming. PCR primers were designed to amplify the kappa constant gene (Ck), and four allele-specific oligonucleotides (ASOs) were used to distinguish the alleles in the amplified PCR products. Direct sequencing of PCR products was performed to confirm that the primers specifically amplified the Ck region and the ASOs differentiated the Km alleles. Sequencing of an average of 209 nucleotides of DNA from 50 individuals revealed no variation except at codon 191, which is known to be involved in a frequent polymorphism. An analysis of 347 different individual DNAs from 10 human populations was conducted to determine Km allelic frequencies within these populations and to apply this type of data collection to population studies. Images Figure 4 Figure 5 PMID:1900145

  11. KM3NeT/ORCA status and plans

    NASA Astrophysics Data System (ADS)

    Samtleben, Dorothea F. E.

    2016-04-01

    Neutrinos created in interactions of cosmic rays with the atmosphere can serve as a powerful tool to unveil the neutrino mass hierarchy (NMH). At low energies, around a few GeV, matter effects from the transition through the Earth are expected to imprint a distinct but also subtle signature on the oscillation pattern, specific to the ordering of the neutrino masses. KM3NeT/ORCA (Oscillations Research with Cosmics in the Abyss), a densely instrumented building block of the upcoming KM3NeT neutrino telescope, will be designated to measuring this signature in the Mediterranean Sea. Using detailed simulations the sensitivity towards this signature has been evaluated. The multi-PMT detectors allow in the water for an accurate reconstruction of GeV neutrino event signatures and distinction of neutrino flavours. For the determination of the mass hierarchy a median significance of 2-6σ has been estimated for three years of data taking, depending on the actual hierarchy and the oscillation parameters. At the same time the values of several oscillation parameters like θ23 will be determined to unprecedented precision.

  12. Quantum crytography over 14km of installed optical fiber

    SciTech Connect

    Hughes, R.J.; Luther, G.G.; Morgan, G.L.; Simmons, C.

    1995-09-01

    We have made the first demonstration that low error rate quantum cryptography over long distances (14km) of installed optical fiber in a real-world environment, subject to uncontrolled temperature and mechanical influences, representing an important new step towards incorporation of quantum cryptography into existing information security systems. We also point out that the high visibility single-photon interference in our experiment allows us to infer a test of the superposition principle of quantum mechanics: a photon reaching the detector has traveled over 14km of optical fiber in a wavepacket comprising a coherent superposition of two components that are spatially separated by about 2m. In principle, there are decoherence processes (or even possible modifications of quantum mechanics) that could cause the photon`s wavefunction to collapse into one component or the other during propagation, leading to a reduction in visibility. However, our results are consistent with no such loss of quantum coherence during the 67-{mu}s propagation time.

  13. Shape from equal thickness contours

    SciTech Connect

    Cong, G.; Parvin, B.

    1998-05-10

    A unique imaging modality based on Equal Thickness Contours (ETC) has introduced a new opportunity for 3D shape reconstruction from multiple views. We present a computational framework for representing each view of an object in terms of its object thickness, and then integrating these representations into a 3D surface by algebraic reconstruction. The object thickness is inferred by grouping curve segments that correspond to points of second derivative maxima. At each step of the process, we use some form of regularization to ensure closeness to the original features, as well as neighborhood continuity. We apply our approach to images of a sub-micron crystal structure obtained through a holographic process.

  14. Laser detection of material thickness

    DOEpatents

    Early, James W.

    2002-01-01

    There is provided a method for measuring material thickness comprising: (a) contacting a surface of a material to be measured with a high intensity short duration laser pulse at a light wavelength which heats the area of contact with the material, thereby creating an acoustical pulse within the material: (b) timing the intervals between deflections in the contacted surface caused by the reverberation of acoustical pulses between the contacted surface and the opposite surface of the material: and (c) determining the thickness of the material by calculating the proportion of the thickness of the material to the measured time intervals between deflections of the contacted surface.

  15. Through thick and thin: Structure of the Galactic thick disc from extragalactic surveys

    NASA Astrophysics Data System (ADS)

    Kordopatis, G.; Hill, V.; Irwin, M.; Gilmore, G.; Wyse, R. F. G.; Tolstoy, E.; de Laverny, P.; Recio-Blanco, A.; Battaglia, G.; Starkenburg, E.

    2013-07-01

    . This population was earlier detected, but our more detailed analysis provides robust estimates of its location (|Z| < 1 kpc), metallicity (-2 < [M/H] < -1 dex) and azimuthal orbital velocity (Vφ ~ 120 km s-1). Conclusions: Given the chemo-dynamical properties of the over-density towards the Carina line-of-sight, we suggest that it represents the metal-poor tail of the canonical thick disc. In spite of the small number of stars available, we suggest that this metal-weak thick disc follows the often suggested canonical thick disc velocity-metallicity correlation of ∂Vφ/∂ [M/H] ~ 40-50 km s-1 dex-1. Based on observations collected at the European Southern Observatory at Paranal, Chile, ESO Large Programme 171.B-0588 (DART) and 171.B-0520(A).Full Tables 2 and 4 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/555/A12

  16. Thermodynamic relationship between structural isomers of the thermochromic compound bis(N-Isopropyl-5,6-benzosalicylideneiminato)nickel(II).

    PubMed

    Wang, Qi; Takeuchi, Akira; Yamamura, Yasuhisa; Saito, Kazuya; Mori, Wasuke; Sorai, Michio

    2008-09-01

    A pair of structural isomers was isolated at room temperature for the thermochromic nickel complex bis( N-isopropyl-5,6-benzosalicylideneiminato)nickel(II); one is a diamagnetic green form with square-planar coordination geometry (G phase), and the other is a paramagnetic brown form with a tetrahedral geometry (B phase). However, a question as to which form is thermodynamically stable was left open. To solve this problem, thermal and magnetic properties of this complex were investigated by adiabatic heat capacity calorimetry in the 6-508 K temperature range and magnetic measurements in the 2-400 K region. In addition to the two forms previously reported, two metastable crystal forms (G' and B' phases) were found. The stable phase sequence was G phase, B phase, and then liquid upon heating. The supercooled B phase gave rise to a small phase transition with nonmagnetic origin at around 50 K. By rapidly cooling the liquid, a glassy liquid state was realized below approximately 290 K. The order of thermodynamic stability at 298.15 K was revealed to be the G, B, G', and then the B' phase. The entropy, enthalpy, and Gibbs energy differences between the B and the G phases at 298.15 K were S degrees (B) - S degrees (G) = 32.8 J K (-1) mol (-1), H degrees (B) - H degrees (G) = 16.0 kJ mol (-1), and G degrees (B) - G degrees (G) = 6.25 kJ mol (-1), respectively. PMID:18698710

  17. Inhibition of Bovine Viral Diarrhea Virus RNA Synthesis by Thiosemicarbazone Derived from 5,6-Dimethoxy-1-Indanone▿

    PubMed Central

    Castro, Eliana F.; Fabian, Lucas E.; Caputto, María E.; Gagey, Dolores; Finkielsztein, Liliana M.; Moltrasio, Graciela Y.; Moglioni, Albertina G.; Campos, Rodolfo H.; Cavallaro, Lucía V.

    2011-01-01

    In the present work, we described the activity of the thiosemicarbazone derived from 5,6-dimethoxy-1-indanone (TSC), which we previously characterized as a new compound that inhibits bovine viral diarrhea virus (BVDV) infection. We showed that TSC acts at a point of time that coincides with the onset of viral RNA synthesis and that it inhibits the activity of BVDV replication complexes (RCs). Moreover, we have selected five BVDV mutants that turned out to be highly resistant to TSC but still susceptible to ribavirin (RBV). Four of these resistant mutants carried an N264D mutation in the viral RNA-dependent RNA polymerase (RdRp). The remaining mutant showed an A392E mutation within the same protein. Some of these mutants replicated slower than the wild-type (wt) virus in the absence of TSC, whereas others showed a partial reversion to the wt phenotype over several passages in the absence of the compound. The docking of TSC in the crystal structure of the BVDV RdRp revealed a close contact between the indane ring of the compound and several residues within the fingers domain of the enzyme, some hydrophobic contacts, and hydrogen bonds with the thiosemicarbazone group. Finally, in the mutated RdRp from resistant BVDV, these interactions with TSC could not be achieved. Interestingly, TSC inhibited BVDV replication in cell culture synergistically with RBV. In conclusion, TSC emerges as a new nonnucleoside inhibitor of BVDV RdRp that is synergistic with RBV, a feature that turns it into a potential compound to be evaluated against hepatitis C virus (HCV). PMID:21430053

  18. Inhibition of bovine viral diarrhea virus RNA synthesis by thiosemicarbazone derived from 5,6-dimethoxy-1-indanone.

    PubMed

    Castro, Eliana F; Fabian, Lucas E; Caputto, María E; Gagey, Dolores; Finkielsztein, Liliana M; Moltrasio, Graciela Y; Moglioni, Albertina G; Campos, Rodolfo H; Cavallaro, Lucía V

    2011-06-01

    In the present work, we described the activity of the thiosemicarbazone derived from 5,6-dimethoxy-1-indanone (TSC), which we previously characterized as a new compound that inhibits bovine viral diarrhea virus (BVDV) infection. We showed that TSC acts at a point of time that coincides with the onset of viral RNA synthesis and that it inhibits the activity of BVDV replication complexes (RCs). Moreover, we have selected five BVDV mutants that turned out to be highly resistant to TSC but still susceptible to ribavirin (RBV). Four of these resistant mutants carried an N264D mutation in the viral RNA-dependent RNA polymerase (RdRp). The remaining mutant showed an A392E mutation within the same protein. Some of these mutants replicated slower than the wild-type (wt) virus in the absence of TSC, whereas others showed a partial reversion to the wt phenotype over several passages in the absence of the compound. The docking of TSC in the crystal structure of the BVDV RdRp revealed a close contact between the indane ring of the compound and several residues within the fingers domain of the enzyme, some hydrophobic contacts, and hydrogen bonds with the thiosemicarbazone group. Finally, in the mutated RdRp from resistant BVDV, these interactions with TSC could not be achieved. Interestingly, TSC inhibited BVDV replication in cell culture synergistically with RBV. In conclusion, TSC emerges as a new nonnucleoside inhibitor of BVDV RdRp that is synergistic with RBV, a feature that turns it into a potential compound to be evaluated against hepatitis C virus (HCV). PMID:21430053

  19. Synthesis and anticancer activities of 4-(4-substituted piperazin)-5,6,7-trialkoxy quinazoline derivatives.

    PubMed

    Zhang, Ying; Huang, Yin-Jiu; Xiang, Hong-Mei; Wang, Pei-Yi; Hu, De-Yu; Xue, Wei; Song, Bao-An; Yang, Song

    2014-05-01

    A series of 4-(4-substituted piperazin)-5,6,7-trialkoxy quinazoline was prepared by conventional heating methods. Among these compounds, the crystal structure of compound 10o (CCDC: 916922) was determined by X-ray crystallography. Bioassay results showed that most target compounds had certain inhibition activities against proliferation of tumor cells, and some compounds even had good broad-spectrum inhibition activities. The ethoxyl series of compounds possessed higher inhibition activities against tumor cells than the methoxyl series of compounds. Bioactivity tests showed that the IC50 values of compound 10s against PC3, MGC803, A375, and A549 cells were 1.8, 2.8, 1.3, and 2.9 μΜ, respectively, which were much higher than those of commercial gefitinib (7.2, 7.6, 7.2, and 9.8 μM, respectively). Conversely, the IC50 values of compound 10s were very low against NH3T3, indicating only weak effect on normal cells as also proven by lactate dehydrogenase and acridine orange/ethidium bromide staining. Analyses of cell configuration and cell cycle revealed that compound 10s possibly caused cells to remain at G0/G1 phase by inhibiting cell proliferation for 24 h. Compound 10s also inhibited the phosphorylation of ERK1/2 and P38 with obvious concentration dependence. Thus, these compounds can inhibit the proliferation of A549 cells through the interruption of ERK1/2 and P38signaling pathways. PMID:24675177

  20. Cratering and penetration experiments in Teflon targets at velocities from 1 to 7 km/s

    NASA Technical Reports Server (NTRS)

    Hoerz, Friedrich; Bernhard, Ronald P.; Cintala, Mark J.; See, Thomas H.

    1995-01-01

    Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility (LDEF) after the spacecraft had spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments in an effort to reproduce such features and to -- hopefully -- understand the relationships between projectile size and the resulting crater or penetration-hole diameter over a wide range of impact velocity. Such relationships are needed to derive the size- and mass-frequency distribution and flux of natural and man-made particles in low-Earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres of 3.175 mm (1/8 inch) nominal diameter (Dp) into pure Teflon FEP targets at velocities ranging from 1 to 7 km/s. Target thickness (T) was varied over more than three orders of magnitude from infinite halfspace targets (Dp/T less than 0.1) to very thin films (Dp/T greater than 100). Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration-hole diameter (Dh) can become larger than that of a standard crater (Dc) at relative target thicknesses of Dp/T = 0.6-0.9. The crater diameter is infinite halfspace Teflon targets increases -- at otherwise constant impact conditions -- with encounter velocity by a factor of V0.44. In contrast, the penetration-hole size is very thin foils (Dp/T greater than 50) is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is

  1. Hybrid fine scale climatology and microphysics of in-cloud icing: From 32 km reanalysis to 5 km mesoscale modeling

    NASA Astrophysics Data System (ADS)

    Lamraoui, Fayçal; Benoit, Robert; Perron, Jean; Fortin, Guy; Masson, Christian

    2015-03-01

    In-cloud icing can impose safety concerns and economic challenges for various industries. Icing climate representations proved beneficial for optimal designs and careful planning. The current study investigates in-cloud icing, its related cloud microphysics and introduces a 15-year time period climatology of icing events. The model was initially driven by reanalysis data from North American Regional Reanalysis and downscaled through a two-level nesting of 10 km and 5 km, using a limited-area version of the Global Environment Multiscale Model of the Canadian Meteorological Center. In addition, a hybrid approach is used to reduce time consuming calculations. The simulation realized exclusively on significant icing days, was combined with non-significant icing days as represented by data from NARR. A proof of concept is presented here for a 1000 km area around Gaspé during January for those 15 years. An increase in the number and intensity of icing events has been identified during the last 15 years. From GEM-LAM simulations and within the atmospheric layer between 10 m and 200 m AGL, supercooled liquid water contents indicated a maximum of 0.4 g m- 3, and 50% of the values are less than 0.05 g m- 3. All values of median volume diameters (MVD) are approximately capped by 70 μm and the typical values are around 15 μm. Supercooled Large Droplets represent approximately 5%. The vertical profile of icing climatology demonstrates a steady duration of icing events until the level of 60 m. The altitudes of 60 m and 100 m indicate substantial icing intensification toward higher elevations. GEM-LAM demonstrated a substantial improvement in the calculation of in-cloud icing, reducing significantly the challenge posed by complex terrains.

  2. An Instrument Suite for the Vertical Characterization of the Ionosphere-Thermosphere System from 100 km to 700km Altitude.

    NASA Astrophysics Data System (ADS)

    Herrero, F.; Nicholas, A.

    2008-05-01

    We describe an instrument suite that includes WTS (the Wind-Temperature Spectrometer developed for the ANDE mission of the Naval Research Laboratory), a new Ion-Drift-Temperature Spectrometer (IDTS) and one each of our new Neutral (NMS) and Ion (IMS) Mass Spectrometers. The WTS and IDTS both implement Small- Deflection Energy Analyzers (SDEAs) developed at NASA Goddard; thus, they are capable of measuring the differential energy and angular distributions of neutrals and ions with the capability of detecting and characterizing non-Maxwellian ion and neutral distributions in the upper atmosphere. The mass spectrometers have a mass resolution of approximately 1/60. The suite is designed for sounding rocket investigations to obtain the vertical distribution of the neutral wind, ion drift, respective temperatures, and relative densities of the major species, e.g., O/N2; in addition it will provide ion and neutral composition, to include metals. The sensitivity of each instrument is sufficient to provide data over altitudes ranging from about 100 to about 700 km. The vertical spatial resolution in the neutral wind/temperature gradually increases from a few meters between 100 and 150 km to 100's of meters above 400 km. The ion drift measurements will have spatial resolution less than 1 m at the peak of the F- region and larger above and below. The wind and ion-drift measurements require large vehicle velocity in the sampled region. We will discuss this and other performance requirements. The capability offered in this instrument suite will make it possible to add new data in our pursuit of two long standing questions: a) the transition from Maxwellian to non-Maxwellian as the thermosphere becomes the exosphere and b) the true O/O2 and O/N2 ratio without instrument contamination due to O recombination in the ion source.

  3. 40 CFR 721.9503 - Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)trimethoxy-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9503 Silane, (3,3,4,4,5,5,6,6,7,7,8,8... subject to reporting. (1) The chemical substance identified as silane,...

  4. 40 CFR 721.9503 - Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)trimethoxy-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9503 Silane, (3,3,4,4,5,5,6,6,7,7,8,8... subject to reporting. (1) The chemical substance identified as silane,...

  5. 40 CFR 721.9503 - Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)trimethoxy-.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9503 Silane, (3,3,4,4,5,5,6,6,7,7,8,8... subject to reporting. (1) The chemical substance identified as silane,...

  6. 40 CFR 721.9503 - Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)trimethoxy-.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9503 Silane, (3,3,4,4,5,5,6,6,7,7,8,8... subject to reporting. (1) The chemical substance identified as silane,...

  7. 40 CFR 721.9503 - Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)trimethoxy-.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Silane, (3,3,4,4,5,5,6,6,7,7,8,8,9,9... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.9503 Silane, (3,3,4,4,5,5,6,6,7,7,8,8... subject to reporting. (1) The chemical substance identified as silane,...

  8. A 700 km long crustal transect across northern Morocco

    NASA Astrophysics Data System (ADS)

    Carbonell, Ramon; Gallart, Josep; Díaz, Jordi; Gil, Alba; Harnafi, Mimoun; Ouraini, Fadila; Ayarza, Puy; Teixell, Antonio; Arboleya, Maria Luisa; Palomeras, Imma; Levander, Alan

    2013-04-01

    Two controlled-source wide angle seismic reflection experiments have been acquired recently (2010 and 2011) in northern Africa across Morocco. A lithospheric scale transect can be constructed by joining both data sets. Hence, an approximately 700 km-long seismic velocity cross section can be derived. From south-to-north the transect goes from the Sahara Platform, south of Merzouga, to Tanger in the north. The first experiment, SIMA, aimed to constrain the crustal structure across the Atlas Mountains. The Rif, the orogenic belt located just south of the coast of Alboran Sea, was the target of the second experiment, RIFSIS. In both cases 900 recording instruments (TEXANS) from the IRIS-PASSCAL instrument center were used to record the acoustic energy generated by explosion shots. In both experiments the shots consisted of 1 TM of explosives fired in ~30 m deep boreholes. Although the data quality varies from shot to shot, key seismic phases as Pg, PmP, Pn, and a few intra-crustal arrivals have been identified to constrain the velocity-depth structure along the whole transect. Forward modelling of the seismic reflection/refraction phases reveals a crust consisting of 3 layers in average. The Moho topography shows from south to north a relatively moderate crustal root beneath the High Atlas, which can reach 40-42 km depth. The crust is thicker beneath the Rif where the Moho is imaged as an asymmetric feature that locally defines a crustal root reaching depths of 50 km and suggesting a crustal imbrication. P wave velocities are rather low in the crust and upper mantle. First arrivals/reflections tomography supports the forward modelling results. Low fold wide-angle stacks obtained by using hyperbolic move-out reveals the geometry of the Moho along the entire transect. Beneath the Atlas, the moderate crustal root inferred is not isostatically consistent with the high surface elevations, hence supporting the idea of a 'mantle plume' as main contributor to the Atlas

  9. Improved Coal-Thickness Measurement

    NASA Technical Reports Server (NTRS)

    Barr, T. A.

    1984-01-01

    Summed signals and dielectric-filled antenna improve measurement. Improved FM radar for measuring thickness of coal seam eliminates spectrum splitting and reduces magnitude of echo from front coal surface.

  10. Metal thickness measurements using radiography

    NASA Astrophysics Data System (ADS)

    Achrekar, P. M.

    1986-04-01

    The present invention relates broadly to a radiographic inspection technique, and in particular to a metal thickness measurement method using radiography. The localized areas wherein the effective metal thickness is less than the minimum that is required for radiation shielding and which can render a shielding enclosure functionless, is readily determined. The invention comprises a process for assuring metal thickness in small regions. The actual metal thickness of small regions can be verified by comparing the optical densities of sections of the metal i.e., stepwedge. A comparator microphotometer, which compares optical densities of spectrum lines from spectrophotometers, compares the optical density of spectrum lines on an exposed spectrum plate (metal under test) with a standard plate (stepwedge).

  11. Edge-on thick discs

    NASA Astrophysics Data System (ADS)

    Kasparova, A.; Katkov, I.; Chilingarian, I.; Silchenko, O.; Moiseev, A.; Borisov, S.

    2016-06-01

    Although thick stellar discs are detected in nearly all edge-on disc galaxies, their formation scenarios still remain a matter of debate. Due to observational difficulties, there is a lack of information about their stellar populations. Using the Russian 6-m telescope BTA we collected deep spectra of thick discs in three edge-on early-type disc galaxies located in different environments: NGC4111 in a dense group, NGC4710 in the Virgo cluster, and NGC5422 in a sparse group. We see intermediate age (4 ‑ 5 Gyr) metal rich ([Fe/H] ~ ‑0.2 ‑ 0.0 dex) stellar populations in NGC4111 and NGC4710. On the other hand, NGC5422 does not harbour young stars, its only disc is thick and old (10 Gyr) and its α-element abundance suggests a long formation epoch implying its formation at high redshift. Our results prove the diversity of thick disc formation scenarios.

  12. Sgs1's roles in DNA end resection, HJ dissolution, and crossover suppression require a two-step SUMO regulation dependent on Smc5/6

    PubMed Central

    Bermúdez-López, Marcelino; Villoria, María Teresa; Esteras, Miguel; Jarmuz, Adam; Torres-Rosell, Jordi; Clemente-Blanco, Andres; Aragon, Luis

    2016-01-01

    The RecQ helicase Sgs1 plays critical roles during DNA repair by homologous recombination, from end resection to Holliday junction (HJ) dissolution. Sgs1 has both pro- and anti-recombinogenic roles, and therefore its activity must be tightly regulated. However, the controls involved in recruitment and activation of Sgs1 at damaged sites are unknown. Here we show a two-step role for Smc5/6 in recruiting and activating Sgs1 through SUMOylation. First, auto-SUMOylation of Smc5/6 subunits leads to recruitment of Sgs1 as part of the STR (Sgs1–Top3–Rmi1) complex, mediated by two SUMO-interacting motifs (SIMs) on Sgs1 that specifically recognize SUMOylated Smc5/6. Second, Smc5/6-dependent SUMOylation of Sgs1 and Top3 is required for the efficient function of STR. Sgs1 mutants impaired in recognition of SUMOylated Smc5/6 (sgs1-SIMΔ) or SUMO-dead alleles (sgs1-KR) exhibit unprocessed HJs at damaged replication forks, increased crossover frequencies during double-strand break repair, and severe impairment in DNA end resection. Smc5/6 is a key regulator of Sgs1's recombination functions. PMID:27298337

  13. ICESat: Sea ice freeboard, snow depth, and thickness

    NASA Astrophysics Data System (ADS)

    Kwok, R.

    2007-12-01

    Total freeboard (snow and ice) and thickness of the Arctic Ocean sea ice cover are derived from ICESat data for two 35-day periods: one during the fall (Oct-Nov) of 2005 and the other during the winter (Feb-Mar) of 2006. Our freeboard retrieval approach is based on reflectivity and the expected statistics of freeboard variability from combined analysis of RADARSAT/ICESat data. Results suggest that our retrieval procedures could provide consistent freeboard estimates along 25-km segments with uncertainties of better than several centimeters. With a climatology of snow density, ECMWF snowfall is used to construct a time-varying field of snow depth for the conversion of freeboard to sea ice thickness. The derived ice thickness estimates are compared with ice draft observations from moored upward looking sonar data and the snow depth/thickness data from mass balance buoys in the Beaufort Sea. Preliminary results show that the estimated ICESat thickness estimates are within 0.5 m of the ice drafts reported by moorings. In this talk, we highlight some of the issues associated with the process of freeboard retrieval, thickness estimation, and quality assessment due to the disparity of spatial resolution between the ICESat footprint and those from in-situ measurements.

  14. Peripapillary choroidal thickness in childhood.

    PubMed

    Read, Scott A; Alonso-Caneiro, David; Vincent, Stephen J; Collins, Michael J

    2015-06-01

    Changes in the thickness of the invivo peripapillary choroid have been documented in a range of ocular conditions in adults; however, choroidal thickness in the peripapillary region of children has not been examined in detail. This study therefore aimed to investigate the thickness of the peripapillary choroid and the overlying retinal nerve fibre layer (RNFL) in a population of normal children with a range of refractive errors. Ninety-three children (37 myopes and 56 non-myopes) aged between 11 and 16 years, had measurements of peripapillary choroidal and RNFL thickness derived from enhanced depth imaging optical coherence tomography images (EDI-OCT, Heidelberg Spectralis). The average thickness was determined in a series of five 0.25 mm width concentric annuli (each divided into 8 equal sized 45° sectors) centred on the optic nerve head boundary, accounting for individual ocular magnification factors and the disc-fovea angle. Significant variations in peripapillary choroidal thickness were found to occur with both annulus location (p < 0.001) and sector position (p < 0.001) in this population of children. The innermost annulus (closest to the edge of the optic disc) exhibited the thinnest choroid (mean 77 ± 16 μm) and the outermost annulus, the thickest choroid (191 ± 52 μm). The choroid was thinnest inferior to the optic nerve head (139 ± 38 μm) and was thickest in the superior temporal sector (157 ± 40 μm). Significant differences in the distribution of choroidal thickness were also associated with myopia, with myopic children having significantly thinner choroids in the inner and outer annuli of the nasal and temporal sectors respectively (p < 0.001). RNFL thickness also varied significantly with annulus location and sector (p < 0.001), and showed differences in thickness distribution associated with refractive error. This study establishes the normal variations in the thickness of the peripapillary choroid with radial distance and azimuthal angle

  15. The ion population between 1300 km and 230000 km in the coma of comet P/Halley

    NASA Technical Reports Server (NTRS)

    Altwegg, K.; Balsiger, H.; Geiss, J.; Goldstein, R.; Ip, W. -H.; Meier, A.; Neugebauer, M.; Rosenbauer, H.; Shelley, E.

    1993-01-01

    During the encounter of the spacecraft Giotto with Comet Halley the two sensors of the ion mass spectrometer (IMS), high energy range spectrometer (HERS) and high intensity spectrometer (HIS), measured the mass and the three-dimensional velocity distributions of cometary ions. HIS looked mainly at the cold, slow part of the distribution close to the nucleus, HERS at the more energetic pick-up ions further out. After a thorough recalibration of the HIS flight spare unit and an extensive data analysis we present here continuous ion density-, composition-, velocity-, and temperature profiles for the water group ion (mass range 16-19 amu/e) along Giotto's inbound trajectory from 230,000 to 1300 km from the comet nucleus. The two sensors are in very good agreement in the region where their measurements overlap thus giving an excellent data base for the discussion of theoretical comet models. The most prominent feature where models and observations disagree is the so called pile up region between 8000 and 15,000 km from the nucleus.

  16. 2540 km: bimagic baseline for neutrino oscillation parameters.

    PubMed

    Dighe, Amol; Goswami, Srubabati; Ray, Shamayita

    2010-12-31

    We show that a source-to-detector distance of 2540 km, motivated recently [S. K. Raut, R. S. Singh, and S. U. Sankar, arXiv:0908.3741] for a narrow band superbeam, offers multiple advantages for a low energy neutrino factory with a detector that can identify muon charge. At this baseline, for any neutrino hierarchy, the wrong-sign muon signal is almost independent of CP violation and θ(13) in certain energy ranges. This allows the identification of the hierarchy in a clean way. In addition, part of the muon spectrum is also sensitive to the CP violating phase and θ(13), so that the same setup can be used to probe these parameters as well. PMID:21231644

  17. Transport System for Delivery Tourists At Altitude 140 km

    NASA Technical Reports Server (NTRS)

    Bolonkin, Alexander

    2002-01-01

    The author offers a new method and installation for flight in space. This method uses the centrifugal force of a rotating circular cable that provides a means for the launch of a payload into outer space, to keep the fixed space stations at high altitudes (up to 200 km). The method may also be useful for landing to space bodies, for launching of the space ships (crafts), and for moving and accelerating other artificial apparatuses. The offered installation may be used as a propulsion system for space ships and/or probes. This system uses the material of any space body (i.e. stones) for acceleration and change of the space vehicle trajectory. The suggested system may be also used as a high capacity energy accumulator.

  18. Readout and data acquisition for KM3NeT

    NASA Astrophysics Data System (ADS)

    Belias, Anastasios; Manolopoulos, Konstantinos

    2013-05-01

    In the KM3NeT neutrino telescope design the readout concept is based on a point-to-point network connecting tenthousands of optical modules in the deep sea through a photonic network with the shore station. The time-over-threshold data from each Photo Multiplier Tube (PMT) of each optical module will be send to shore over fibres using dedicated wavelengths. Nanosecond timing accuracy will be schieved using a clock signal embedded in the data stream and measuring the roundtrip time from the shore to each optical module individually. The DAQ software architecture based on the Internet Communications Engine (ICE) will provide a common and uniform software framework for the control of each optical module and the data acquisition of the whole neutrino telescope.

  19. Fatal truck-bicycle accident involving dragging for 45 km.

    PubMed

    Klintschar, M; Darok, M; Roll, P

    2003-08-01

    Vehicle-bicycle accidents with subsequent dragging of the rider over long distances are extremely rare. The case reported here is that of a 16-year-old mentally retarded bike rider who was run over by a truck whose driver failed to notice the accident. The legs of the victim became trapped by the rear axle of the trailer and the body was dragged over 45 km before being discovered under the parked truck. The autopsy revealed that the boy had died from the initial impact and not from the dragging injuries which had caused extensive mutilation. The reports of the technical expert and the forensic pathologist led the prosecutor to drop the case against the truck driver for manslaughter. PMID:12748865

  20. Calibration methods and tools for KM3NeT

    NASA Astrophysics Data System (ADS)

    Kulikovskiy, Vladimir

    2016-04-01

    The KM3NeT detectors, ARCA and ORCA, composed of several thousands digital optical modules, are in the process of their realization in the Mediterranean Sea. Each optical module contains 31 3-inch photomultipliers. Readout of the optical modules and other detector components is synchronized at the level of sub-nanoseconds. The position of the module is measured by acoustic piezo detectors inside the module and external acoustic emitters installed on the bottom of the sea. The orientation of the module is obtained with an internal attitude and heading reference system chip. Detector calibration, i.e. timing, positioning and sea-water properties, is overviewed in this talk and discussed in detail in this conference. Results of the procedure applied to the first detector unit ready for installation in the deep sea will be shown.

  1. Estimating worldwide solar radiation resources on a 40km grid

    SciTech Connect

    Maxwell, E.L.; George, R.L.; Brady, E.H.

    1996-11-01

    During 1995, the National Renewable Energy Laboratory (NREL), initiated the Data Grid Task under the auspices of DOE`s Resource Assessment Program. A data grid is a framework of uniformly spaced locations (grid points) for which data are available. Estimates of monthly averages of direct normal, diffuse horizontal, and global horizontal daily-total solar radiation energy (kWh/m{sup 2}) are being made for each point on a grid covering the US, Mexico, the Caribbean, and southern Canada. The grid points are separated by approximately 40 km. Using interpolation methods, the digital data grid can be used to estimate solar resources at any location. The most encouraging result to date has been the location of sources providing worldwide data for most of the input parameters required for modeling daily total solar radiation. This is a multiyear task expected to continue through the rest of this century.

  2. Constraining density and velocity jumps across the 410 km discontinuity

    NASA Astrophysics Data System (ADS)

    Saki, Morvarid; Thomas, Christine; Cobden, Laura; Abreu, Rafael

    2016-04-01

    We investigate the velocity and density structure of the olivine-to-wadsleyite transition using polarities of precursor arrivals to PP seismic waves that reflect off the 410 km discontinuity beneath the Northern Atlantic. Numerous source-receiver combinations have been used in order to collect a dataset of reflection points beneath our investigation area. We analyzed over 1700 seismograms from Mw > 5.8 using array seismology methods to enhance the signal to noise ratio. For each event the polarity of the PP phase is compared to polarity of the precursor signal and we find several events where the polarity of the precursors are opposite to that of PP. There does not seem to be any dependency of the observed polarities on the propagation direction of the seismic waves but interestingly there seems to be a dependency on the distance between source and receiver. The events with epicentral distances greater than 119 degrees mostly show opposite polarities, while for those with smaller epicentral distances the same polarity of the main phase and precursor signal is dominant. Using Zeoppritz equations, we analyzed more than 64 million combinations of density, compressional and shear wave velocities for both layers, above and below the 410 km discontinuity in order to find the best combination of those parameters that can explain the observations. The results are indicating combinations of density, P and S wave velocity exhibiting a smaller contrast compared to those from the pyrolite model (the density jump, however is still positive to provide physically meaningful results). The calculated reductions in both compressional and shear wave velocities go up to 13% but mostly fall within the range of less than 7- 8%. We interpret this reduction in elastic properties and seismic velocity of minerals as the effect of a higher than normal content of water of wadsleyite in this region, while we can exclude a reduction in iron.

  3. Models of crustal thickness for South America from seismic refraction, receiver functions and surface wave tomography

    NASA Astrophysics Data System (ADS)

    Assumpção, Marcelo; Feng, Mei; Tassara, Andrés; Julià, Jordi

    2013-12-01

    An extensive compilation of crustal thicknesses is used to develop crustal models in continental South America. We consider point crustal thicknesses from seismic refraction experiments, receiver function analyses, and surface-wave dispersion. Estimates of crustal thickness derived from gravity anomalies were only included along the continental shelf and in some areas of the Andes to fill large gaps in seismic coverage. Two crustal models were developed: A) by simple interpolation of the point estimates, and B) our preferred model, based on the same point estimates, interpolated with surface-wave tomography. Despite gaps in continental coverage, both models reveal interesting crustal thickness variations. In the Andean range, the crust reaches 75 km in Southern Peru and the Bolivian Altiplano, while crustal thicknesses seem to be close to the global continental average (~ 40 km) in Ecuador and southern Colombia (despite high elevations), and along the southern Andes of Chile-Argentina (elevation lower than 2000 m). In the stable continental platform the average thickness is 38 ± 5 km (1-st. deviation) and no systematic differences are observed among Archean-Paleoproterozoic cratons, NeoProterozoic fold belts, and low-altitude intracratonic sedimentary basins. An exception is the Borborema Province (NE Brazil) with crust ~ 30-35 km thick. Narrow belts surrounding the cratons are suggested in central Brazil, parallel to the eastern and southern border of the Amazon craton, and possibly along the TransBrasiliano Lineament continuing into the Chaco basin, where crust thinner than 35 km is observed. In the sub-Andean region, between the mid-plate cratons and the Andean cordillera, the crust tends to be thinner (~ 35 km) than the average crust in the stable platform, a feature possibly inherited from the old pre-Cambrian history of the continent. We expect that these crustal models will be useful for studies of isostasy, dynamic topography, and crustal evolution of the

  4. Models of Crustal Thickness for South America from Seismic Refraction, Receiver Functions and Surface Wave Tomography

    NASA Astrophysics Data System (ADS)

    Assumpcao, M.; Feng, M.; Tassara, A.; Julia, J.

    2013-05-01

    An extensive compilation of crustal thicknesses is used to develop crustal models in continental South America. We consider point crustal thicknesses from seismic seismic refraction experiments, receiver function analyses, and surface-wave dispersion. Estimates of crustal thickness derived from gravity anomalies were only included along the continental shelf and in some areas of the Andes to fill large gaps in seismic coverage. Two crustal models were developed: A) by simple interpolation of the ~1000 point estimates, and B) our preferred model, based on the same point estimates, interpolated with surface-wave tomography. Despite gaps in continental coverage, both models reveal interesting crustal thickness variations. In the Andean range, the crust reaches 75 km in Southern Peru and the Bolivian Altiplano, while crustal thicknesses seem to be close to the global continental average (~40 km) in Ecuador and southern Colombia (despite high elevations), and along the southern Andes of Chile-Argentina (elevation lower than 2000 m). In the stable continental platform the average thickness is 38 ± 5 km (1 std. deviation) and no systematic differences are observed among Archean-Paleoproterozoic cratons, NeoProterozoic fold belts, and low-altitude intracratonic sedimentary basins. An exception is the Borborema Province (NE Brazil) with crust ~30-35 km thick. Narrow belts surrounding the cratons are suggested in central Brazil, parallel to the eastern and southern border of the Amazon craton, and possibly along the Transbrasiliano Lineament continuing into the Chaco basin, where crust thinner than 35 km is observed. In the sub-Andean region, between the mid-plate cratons and the Andean cordillera, the crust tends to be thinner (~35 km) than the average crust in the stable platform, a feature possibly inherited from the old pre-Cambrian history of the continent. We expect these crustal models will be useful for studies of isostasy, dynamic topography, and crustal evolution

  5. On the Spatial Variability of the Martian Elastic Lithosphere Thickness: Evidence for Mantle Plumes?

    NASA Astrophysics Data System (ADS)

    Grott, M.; Breuer, D.

    2009-12-01

    The elastic lithosphere thickness at the Martian North Pole has recently been constrained by estimating the flexural response of the lithosphere to loading at the polar caps and a minimum elastic thickness of 300 km has been determined. This is a factor of three to four larger than elastic thickness estimates for other Amazonian surface units like the Tharsis volcanoes, which exhibit elastic thicknesses around 75 to 90 km. Here we investigate the spatial heterogeneity of the Martian elastic lithosphere thickness and present a model which takes the locally varying crustal thickness, the local concentration of heat producing elements as well as variations of strain rate into account. The model predicts D = 225 km at the North Pole today, whereas D = 75-90 km is obtained at the Tharsis volcanoes if a mid Amazonian loading age is assumed. Therefore, although a large degree of spatial heterogeneity can be explained by the presented model, large elastic thicknesses in excess of 300 km cannot be reproduced. In order to fit all elastic thickness values derived from observations the mantle heat flow at the North Pole needs to be smaller than the global average. A local reduction of heat flow by 25% with respect to the chondritic value would be sufficient to explain the large elastic thicknesses observed there. However, a local reduction of heat flow can only be reconciled with a bulk chondritic concentration of heat producing elements in the Martian interior if the excess heat is deposited elsewhere. This could be achieved by mantle plumes, possibly active underneath Tharsis. The size and strength of such a plume is constrained by the elastic thickness at the Tharsis Montes and maximum average heat flows between 8 and 20 mW/m2, corresponding to central peak heat flows of 40 to 100 mW/m2, are consistent with the observations. Such a plume would leave a clear signature in the surface heat flow and should be readily detectable by in-situ heat flow measurements. Gray

  6. Focusing Cosmic Telescopes: Exploring Redshift z ~ 5-6 Galaxies with the Bullet Cluster 1E0657 - 56

    NASA Astrophysics Data System (ADS)

    Bradač, Maruša; Treu, Tommaso; Applegate, Douglas; Gonzalez, Anthony H.; Clowe, Douglas; Forman, William; Jones, Christine; Marshall, Phil; Schneider, Peter; Zaritsky, Dennis

    2009-12-01

    The gravitational potential of clusters of galaxies acts as a cosmic telescope allowing us to find and study galaxies at fainter limits than otherwise possible and thus probe closer to the epoch of formation of the first galaxies. We use the Bullet cluster 1E0657 - 56 (z = 0.296) as a case study, because its high mass and merging configuration makes it one of the most efficient cosmic telescopes we know. We develop a new algorithm to reconstruct the gravitational potential of the Bullet cluster based on a non-uniform adaptive grid, combining strong and weak gravitational lensing data derived from deep Hubble Space Telescope/Advanced Camera for Surveys F606W-F775W-F850LP and ground-based imaging. We exploit this improved mass map to study z ~ 5-6 Lyman break galaxies (LBGs), which we detect as dropouts. One of the LBGs is multiply imaged, providing a geometric confirmation of its high redshift, and is used to further improve our mass model. We quantify the uncertainties in the magnification map reconstruction in the intrinsic source luminosity, and in the volume surveyed, and show that they are negligible compared to sample variance when determining the luminosity function of high-redshift galaxies. With shallower and comparable magnitude limits to Hubble Ultra Deep Field (HUDF) and Great Observatories Origins Deep Survey (GOODS), the Bullet cluster observations, after correcting for magnification, probe deeper into the luminosity function of the high-redshift galaxies than GOODS and only slightly shallower than HUDF. We conclude that accurately focused cosmic telescopes are the most efficient way to sample the bright end of the luminosity function of high-redshift galaxies and—in case they are multiply imaged—confirm their redshifts. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5

  7. Emerging toxicity of 5,6-methylenedioxy-2-aminoindane (MDAI): Pharmacokinetics, behaviour, thermoregulation and LD50 in rats.

    PubMed

    Páleníček, Tomáš; Lhotková, Eva; Žídková, Monika; Balíková, Marie; Kuchař, Martin; Himl, Michal; Mikšátková, Petra; Čegan, Martin; Valeš, Karel; Tylš, Filip; Horsley, Rachel R

    2016-08-01

    MDAI (5,6-Methylenedioxy-2-aminoindane) has a reputation as a non-neurotoxic ecstasy replacement amongst recreational users, however the drug has been implicated in some severe and lethal intoxications. Due to this, and the fact that the drug is almost unexplored scientifically we investigated a broad range of effects of acute MDAI administration: pharmacokinetics (in sera, brain, liver and lung); behaviour (open field; prepulse inhibition, PPI); acute effects on thermoregulation (in group-/individually-housed rats); and systemic toxicity (median lethal dose, LD50) in Wistar rats. Pharmacokinetics of MDAI was rapid, maximum median concentration in serum and brain was attained 30min and almost returned to zero 6h after subcutaneous (sc.) administration of 10mg/kg MDAI; brain/serum ratio was ~4. MDAI particularly accumulated in lung tissue. In the open field, MDAI (5, 10, 20 and 40mg/kg sc.) increased exploratory activity, induced signs of behavioural serotonin syndrome and reduced locomotor habituation, although by 60min some effects had diminished. All doses of MDAI significantly disrupted PPI and the effect was present during the onset of its action as well as 60min after treatment. Unexpectedly, 40mg/kg MDAI killed 90% of animals in the first behavioural test, hence LD50 tests were conducted which yielded 28.33mg/kg sc. and 35mg/kg intravenous but was not established up to 40mg/kg after gastric administration. Disseminated intravascular coagulopathy (DIC) with brain oedema was concluded as a direct cause of death in sc. treated animals. Finally, MDAI (10, 20mg/kg sc.) caused hyperthermia and perspiration in group-housed rats. In conclusion, the drug had fast pharmacokinetics and accumulated in lipohilic tissues. Behavioural findings were consistent with mild, transient stimulation with anxiolysis and disruption of sensorimotor processing. Together with hyperthermia, the drug had a similar profile to related entactogens, especially 3

  8. Mesoscale simulations of the November 25-26 and December 5-6 cirrus cases using the RAMS model

    NASA Technical Reports Server (NTRS)

    Harrington, J. L.; Meyers, Michael P.; Cotton, William R.

    1993-01-01

    The Regional Atmospheric Modeling System (RAMS), developed at Colorado State University, was used during the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE) 2 (13 Nov. through 6 Dec. 1991) to provide real time forecasts of cirrus clouds. Forecasts were run once a day, initializing with the 0000 UTC dataset provided by NOAA (Forecast Systems Laboratory (FSL) Mesoscale Analysis and Prediction System (MAPS)). In order to obtain better agreement with observations, a second set of simulations were done for the FIRE 2 cases that occurred on 25-26 Nov. and 5-6 Dec. In this set of simulations, a more complex radiation scheme was used, the Chen/Cotton radiation scheme, along with the nucleation of ice occurring at ice supersaturations as opposed to nucleation occurring at water supersaturations that was done in the actual forecast version. The runs using these more complex schemes took longer wall clock time (7-9 hours for the actual forecasts as compared to 12-14 hrs for the runs using the more complex schemes) however, the final results of the simulations were definitely improved upon. Comparisons between these two sets of simulations are given. Now underway are simulations of these cases using a closed analytical solution for the auto-conversion of ice from a pristine ice class (sizes less than about 50 microns in effective diameter) to a snow class (effective diameters on the order of several hundred microns). This solution is employed along with a new scheme for the nucleation of ice crystals due to Meyers et al and Demott et al. The scheme is derived assuming complete gamma distributions for both the pristine and snow classes. The time rate of change of the number concentration and mass mixing-ratio of each distribution is found by calculating either the flux of crystals that grow beyond a certain critical diameter by vapor deposition in an ice supersaturated regime or by calculating the flux of crystals that evaporate to

  9. Pharmacokinetics and metabolism of triclopyr 3,5,6-trichloro-2-pyridinyloxyacetic acid) in Fischer 344 rats.

    PubMed

    Timchalk, C; Dryzga, M D; Kastl, P E

    1990-05-14

    Triclopyr, (3,5,6-trichloro-2-pyridinyloxyacetic acid) is the active component of GARLON (trademark of the Dow Chemical Company) brand herbicide. [14C]Triclopyr was administered orally to groups of 5 rats/sex as a single 3 and 60 mg/kg body weight dose and as a multiple 3 mg/kg nonradiolabeled dose for 14 days followed by a single 3 mg [14C]triclopyr/kg dose on day 15. A fourth group (5 rats/sex) was administered a single 3 mg/kg intravenous dose of [14C]triclopyr. In addition, two groups of male rats (3/dose) were used to obtain 14C plasma time-course data and were orally administered [14C]triclopyr at doses of 3 and 60 mg/kg. Between 94 and 97% of the administered radioactivity was recovered, and the principal route of excretion was the urine (89-95%). The feces contained less than 3% of the dose and the expired 14CO2 and cage wash accounted for less than 0.2 and 1% of the dose, respectively. The tissues and carcass accounted for less than 2% of the radioactivity at 72 h post-dosing. [14C]Triclopyr was rapidly and completely absorbed after oral administration of 3 and 60 mg/kg. The radioactivity was cleared from the plasma of male rats at 3 mg/kg in a mono-exponential manner, with an apparent first-order elimination half-life of 3.6 h. The primary difference between the 3 and 60 mg/kg dose kinetics was the saturation of renal elimination of triclopyr through 9 h post-dosing for the 60 mg/kg group. [14C]Triclopyr was primarily excreted unchanged in the urine (81-96% of the urinary radioactivity), although 4 minor urinary metabolites were noted. Aside from the initial saturation of renal elimination of triclopyr at 60 mg/kg, there were no appreciable differences in the absorption, disposition, or metabolism of [14C]triclopyr, based on sex, or prior exposure. PMID:2343458

  10. Regional crustal thickness and precipitation in young mountain chains

    PubMed Central

    Ernst, W. G.

    2004-01-01

    Crustal thickness is related to climate through precipitation-induced erosion. Along the Andes, the highest mountains and thickest crust (≈70 km) occur at 25° south, a region of low precipitation. Westerly winds warm passing over the Atacama Desert; precipitation is modest in the High Andes and eastward over the Altiplano. Severe aridity, hence low erosion rates, helps to account for the elevated volcanogenic contractional arc and high, internally draining plateau in its rain shadow. Weak erosion along the north-central arc provides scant amounts of sediment to the Chile–Peru Trench, starving the subduction channel. Subcrustal removal might be expected to reduce the crustal thickness, but is not a factor at 25° south. The thickness of the gravitationally compensated continental crust cannot reflect underplating and/or partial fusion of sediments, but must be caused chiefly by volcanism-plutonism and contraction. Contrasting climate typifies the terrane at 45° south where moisture-laden westerly winds encounter a cool margin, bringing abundant precipitation. The alpine landscape is of lower average elevation compared with the north-central Andes and is supported by thinner continental crust (≈35 km). Intense erosion supplies voluminous clastic debris to the offshore trench, and vast quantities are subducted. However, the southern Andean crust is only about half as thick as that at 25° south, suggesting that erosion, not subcrustal sediment accretion or anatexis, is partly responsible for the thickness of the mountain belt. The Himalayas plus Tibetan Plateau, the Sierra Nevada plus Colorado Plateau, and the Japanese Islands exhibit analogous relationships between crustal thickness and climate. PMID:15471988

  11. Regional crustal thickness and precipitation in young mountain chains.

    PubMed

    Ernst, W G

    2004-10-19

    Crustal thickness is related to climate through precipitation-induced erosion. Along the Andes, the highest mountains and thickest crust (approximately 70 km) occur at 25 degrees south, a region of low precipitation. Westerly winds warm passing over the Atacama Desert; precipitation is modest in the High Andes and eastward over the Altiplano. Severe aridity, hence low erosion rates, helps to account for the elevated volcanogenic contractional arc and high, internally draining plateau in its rain shadow. Weak erosion along the north-central arc provides scant amounts of sediment to the Chile-Peru Trench, starving the subduction channel. Subcrustal removal might be expected to reduce the crustal thickness, but is not a factor at 25 degrees south. The thickness of the gravitationally compensated continental crust cannot reflect underplating and/or partial fusion of sediments, but must be caused chiefly by volcanism-plutonism and contraction. Contrasting climate typifies the terrain at 45 degrees south where moisture-laden westerly winds encounter a cool margin, bringing abundant precipitation. The alpine landscape is of lower average elevation compared with the north-central Andes and is supported by thinner continental crust (approximately 35 km). Intense erosion supplies voluminous clastic debris to the offshore trench, and vast quantities are subducted. However, the southern Andean crust is only about half as thick as that at 25 degrees south, suggesting that erosion, not subcrustal sediment accretion or anatexis, is partly responsible for the thickness of the mountain belt. The Himalayas plus Tibetan Plateau, the Sierra Nevada plus Colorado Plateau, and the Japanese Islands exhibit analogous relationships between crustal thickness and climate. PMID:15471988

  12. Photographer : JPL Range : 241,000km (150,600 mi.). This black and white image of Europa, smallest

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Photographer : JPL Range : 241,000km (150,600 mi.). This black and white image of Europa, smallest of Jupiter's four Galilean satellites, was acquired by Voyager 2. Europa, the brightest of the Galiliean satellites, has a density slightly less than Io, suggesting it has a substantial quantity of water. Scientists previously speculated that the water must have cooled from the interior and formed a mantle of ice perhaps 100 km thick. The complex patterns on its surface suggest that the icy surface was fractured, and that the cracks filled with dark material from below. Very few impact craters are visible on the surface, suggesting that active processes on the surface are still modifying Europa. The tectonic pattern seen on its surface differs drastically from the fault systems seen on Ganymede where pieces of the crust have moved relative to each other. On Europa, the crust evidently fractures but the pieces remain in roughly their original position.

  13. Evaluation of the 7-km GEOS-5 Nature Run

    NASA Technical Reports Server (NTRS)

    Gelaro, Ronald; Putman, William M.; Pawson, Steven; Draper, Clara; Molod, Andrea; Norris, Peter M.; Ott, Lesley; Prive, Nikki; Reale, Oreste; Achuthavarier, Deepthi; Bosilovich, Michael; Buchard, Virginie; Chao, Winston; Coy, Lawrence; Cullather, Richard; da Silva, Arlindo; Darmenov, Anton; Koster, Randal; McCarty, Will; Schubert, Siegfried

    2015-01-01

    This report documents an evaluation by the Global Modeling and Assimilation Office (GMAO) of a two-year 7-km-resolution non-hydrostatic global mesoscale simulation produced with the Goddard Earth Observing System (GEOS-5) atmospheric general circulation model. The simulation was produced as a Nature Run for conducting observing system simulation experiments (OSSEs). Generation of the GEOS-5 Nature Run (G5NR) was motivated in part by the desire of the OSSE community for an improved high-resolution sequel to an existing Nature Run produced by the European Centre for Medium-Range Weather Forecasts (ECMWF), which has served the community for several years. The intended use of the G5NR in this context is for generating simulated observations to test proposed observing system designs regarding new instruments and their deployments. Because NASA's interest in OSSEs extends beyond traditional weather forecasting applications, the G5NR includes, in addition to standard meteorological components, a suite of aerosol types and several trace gas concentrations, with emissions downscaled to 10 km using ancillary information such as power plant location, population density and night-light information. The evaluation exercise described here involved more than twenty-five GMAO scientists investigating various aspects of the G5NR performance, including time mean temperature and wind fields, energy spectra, precipitation and the hydrological cycle, the representation of waves, tropical cyclones and midlatitude storms, land and ocean surface characteristics, the representation and forcing effects of clouds and radiation, dynamics of the stratosphere and mesosphere, and the representation of aerosols and trace gases. Comparisons are made with observational data sets when possible, as well as with reanalyses and other long model simulations. The evaluation is broad in scope, as it is meant to assess the overall realism of basic aspects of the G5NR deemed relevant to the conduct of OSSEs

  14. Tube wall thickness measurement apparatus

    DOEpatents

    Lagasse, Paul R.

    1987-01-01

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  15. Tube wall thickness measurement apparatus

    DOEpatents

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  16. System for measuring film thickness

    DOEpatents

    Batishko, Charles R.; Kirihara, Leslie J.; Peters, Timothy J.; Rasmussen, Donald E.

    1990-01-01

    A system for determining the thicknesses of thin films of materials exhibiting fluorescence in response to exposure to excitation energy from a suitable source of such energy. A section of film is illuminated with a fixed level of excitation energy from a source such as an argon ion laser emitting blue-green light. The amount of fluorescent light produced by the film over a limited area within the section so illuminated is then measured using a detector such as a photomultiplier tube. Since the amount of fluorescent light produced is a function of the thicknesses of thin films, the thickness of a specific film can be determined by comparing the intensity of fluorescent light produced by this film with the intensity of light produced by similar films of known thicknesses in response to the same amount of excitation energy. The preferred embodiment of the invention uses fiber optic probes in measuring the thicknesses of oil films on the operational components of machinery which are ordinarily obscured from view.

  17. Source modelling of the M5-6 Emilia-Romagna, Italy, earthquakes (2012 May 20-29)

    NASA Astrophysics Data System (ADS)

    Cesca, Simone; Braun, Thomas; Maccaferri, Francesco; Passarelli, Luigi; Rivalta, Eleonora; Dahm, Torsten

    2013-06-01

    On 2012 May 20 and 29, two damaging earthquakes with magnitudes Mw 6.1 and 5.9, respectively, struck the Emilia-Romagna region in the sedimentary Po Plain, Northern Italy, causing 26 fatalities, significant damage to historical buildings and substantial impact to the economy of the region. The earthquake sequence included four more aftershocks with Mw ≥ 5.0, all at shallow depths (about 7-9 km), with similar WNW-ESE striking reverse mechanism. The timeline of the sequence suggests significant static stress interaction between the largest events. We perform here a detailed source inversion, first adopting a point source approximation and considering pure double couple and full moment tensor source models. We compare different extended source inversion approaches for the two largest events, and find that the rupture occurred in both cases along a subhorizontal plane, dipping towards SSW. Directivity is well detected for the May 20 main shock, indicating that the rupture propagated unilaterally towards SE. Based on the focal mechanism solution, we further estimate the co-seismic static stress change induced by the May 20 event. By using the rate-and-state model and a Poissonian earthquake occurrence, we infer that the second largest event of May 29 was induced with a probability in the range 0.2-0.4. This suggests that the segment of fault was already prone to rupture. Finally, we estimate peak ground accelerations for the two main events as occurred separately or simultaneously. For the scenario involving hypothetical rupture areas of both main events, we estimate Mw = 6.3 and an increase of ground acceleration by 50 per cent. The approach we propose may help to quantify rapidly which regions are invested by a significant increase of the hazard, bearing the potential for large aftershocks or even a second main shock.

  18. Development of a high-resolution record of Great Basin climate change during MIS 5, 6, and 7

    NASA Astrophysics Data System (ADS)

    Cross, M.; McGee, D.; Broecker, W. S.; Quade, J.; Cheng, H.; Edwards, R.

    2013-12-01

    As evinced by the cycles of the large paleolakes Lahontan and Bonneville, the currently semi-arid to arid Great Basin region of the United States has experienced significant changes in climate and water balance in the past. Although there has been substantial research concerning these changes for times around and since the last glacial maximum, relatively little is known about the region's previous climate and water balance history. There is a clear need for a long-term record for earlier glacial and interglacial periods. Here, we present some of our initial results from Lehman Cave (39.01°N, 114.22°W), a well-decorated, active cave located on the edge of the Bonneville Basin in the Great Basin National Park, for times correlating with large portions of Marine Oxygen Isotope Stages (MIS) 5, 6, and 7. We initially surveyed a suite of speleothems to obtain times and durations of growth phases to aid in choosing samples appropriate for more extensive analysis. Approximately eighty 2 to 10 mg samples with a mean 238U of 400 ppb, representing most of the major growth phases of this suite of 20 speleothems, were analyzed for preliminary uranium-thorium dates. A subset of eight of these stalagmites grew collectively over large portions of MIS 5 and 6 (an interval that includes the Little Valley lake cycle of the Bonneville Basin) as well as a substantial portion of MIS 7. This record includes several significant periods of contemporaneous growth, including: 81.5 to 103 ka, which corresponds to the interval between Dansgaard-Oeschger events 21 and 23; 204 to 207 ka; and 118 to 132 ka, an interval including the beginning of the last interglacial period and the end of Termination II and Heinrich Stadial 11. We have yet to identify growth phases between 103 to 118 ka, 134 to 137 ka, and 164 to 169 ka. Initial stable isotope results indicate a shift of approximately +3‰ δ18O and +5‰ δ13C around 131 × 2.5 ka, which agrees within error with the findings of Shakun et al

  19. The Crust and Mantle Relationships Beneath Central and Southern Iberian Peninsula constrained by a 550 km long multiseismic transect

    NASA Astrophysics Data System (ADS)

    Ehsan, Siddique Akhtar; Carbonell, Ramon; Simancas, Jose Fernando; Martinez Poyatos, David; Azor, Antonio; Ayarza, Puy; Storti, Fabrizio

    2013-04-01

    A composite lithospheric cross section which is composed by data from controlled source multiseismic experiments strongly constrains the lithospheric structure of southwestern Iberia. The data includes coincident normal incidence and wide-angle profiles along an, approximately, 550 km long transect. This transect goes across, from North-to-South, the major tectonic zones that build up Southwestern part of the Iberian Peninsula (the Central Iberian Zone -CIZ-, the Ossa-Morena Zone -OMZ- and the South Portuguese Zone -SPZ-). The knowledge provided by these datasets constitutes the base to develop multidisciplinary models of the lithosphere. The multichannel deep seismic high resolution (60-90 fold) profiles, IBERSEIS & ALCUDIA were acquired in summer 2001 and 2007 are about 300 and 250 km long respectively. The transects image 20 s (TWTT), about 70 km depth. To address the crust and upper mantle structural relationships a reassessment of the normal incidence seismic reflection transect ALCUDIA has been carried out. We revised the key processing steps and applied advance analysis on the ALCUDIA transect with the aim to improve the signal to noise ratio especially in the deep parts and to produce a depth migrated image. The velocity model generated through wide-angle seismic survey (2003) was used to convert IBERSEIS time migrated stack image into depth. The new data processing flow provide better structural constraints on the shallow and deep structures as the current images reveal indentation features which strongly suggest horizontal tectonics. The ALCUDIA transect shows slightly less reflective upper crust about 13 km thick decoupled from the comparatively reflective lower crust. The reflectivity of the lower crust is continuous, high amplitude, horizontal and parallel though evidences of deformation are present as flat-ramp-flat geometry on the northeastern portion and a "Crocodile structure" wedging into the upper mantle on the southwestern portion of the ALCUDIA

  20. ASIC design in the KM3NeT detector

    NASA Astrophysics Data System (ADS)

    Gajanana, D.; Gromov, V.; Timmer, P.

    2013-02-01

    In the KM3NeT project [1], Cherenkov light from the muon interactions with transparent matter around the detector, is used to detect neutrinos. Photo multiplier tubes (PMT) used as photon sensor, are housed in a glass sphere (aka Optical Module) to detect single photons from the Cherenkov light. The PMT needs high operational voltage ( ~ 1.5 kV) and is generated by a Cockroft-Walton (CW) multiplier circuit. The electronics required to control the PMT's and collect the signals is integrated in two ASIC's namely: 1) a front-end mixed signal ASIC (PROMiS) for the readout of the PMT and 2) an analog ASIC (CoCo) to generate pulses for charging the CW circuit and to control the feedback of the CW circuit. In this article, we discuss the two integrated circuits and test results of the complete setup. PROMiS amplifies the input charge, converts it to a pulse width and delivers the information via LVDS signals. These LVDS signals carry accurate information on the Time of arrival ( < 2 ns) and Time over Threshold. A PROM block provides unique identification to the chip. The chip communicates with the control electronics via an I2C bus. This unique combination of the ASIC's results in a very cost and power efficient PMT base design.

  1. Nausea is associated with endotoxemia during a 161-km ultramarathon.

    PubMed

    Stuempfle, Kristin J; Valentino, Taylor; Hew-Butler, Tamara; Hecht, Frederick M; Hoffman, Martin D

    2016-09-01

    This study explored possible contributing factors to gastrointestinal distress, including endotoxemia, hyperthermia, dehydration and nutrition, during a 161-km ultramarathon. Thirty runners participated in the study and 20 finished the race. At three checkpoints and the finish, runners were interviewed to assess the incidence and severity of 12 gastrointestinal symptoms and to determine dietary intake. Core temperature was measured at the same locations. Runners were weighed pre-race, at the three checkpoints and the finish to monitor hydration status. Blood markers for endotoxemia (sCD14) and inflammation (interleukin-6 and C-reactive protein) were measured pre- and post-race. Gastrointestinal symptoms were experienced by most runners (80%), with nausea being the most common complaint (60%). Runners with nausea experienced significantly greater (P = 0.02) endotoxemia than those without nausea (sCD14 mean increase 0.7 versus 0.5 µg · mL(-1)). There was a significant positive correlation (r = 0.652, P = 0.005) between nausea severity and endotoxemia level. Inflammatory response, core temperature, hydration level and race diet were similar between runners with and without nausea. This study links endotoxemia to nausea in ultramarathon runners. Other possible contributing factors to nausea such as hyperthermia, dehydration and nutrition did not appear to play a role in the symptomatic runners in this study. PMID:26707127

  2. A 233 km tunnel for lepton and hadron colliders

    NASA Astrophysics Data System (ADS)

    Summers, D. J.; Cremaldi, L. M.; Datta, A.; Duraisamy, M.; Luo, T.; Lyons, G. T.

    2012-12-01

    A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of e+e-, pp, and μ+μ- collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV e+e- colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV e+e- collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV pp collider uses the high intensity Fermilab p source, exploits high cross sections for pp production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice.

  3. KM3NeT Digital Optical Module electronics

    NASA Astrophysics Data System (ADS)

    Real, Diego

    2016-04-01

    The KM3NeT collaboration is currently building of a neutrino telescope with a volume of several cubic kilometres at the bottom of the Mediterranean Sea. The telescope consists of a matrix of Digital Optical Modules that will detect the Cherenkov light originated by the interaction of the neutrinos in the proximity of the detector. This contribution describes the main components of the read-out electronics of the Digital Optical Module: the Power Board, which delivers all the power supply required by the Digital Optical Molule electronics; the Central Logic Board, the main core of the read-out system, hosting 31 Time to Digital Converters with 1 ns resolution and the White Rabbit protocol embedded in the Central Logic Board Field Programmable Gate Array; the Octopus boards, that transfer the Low Voltage Digital Signals from the PMT bases to the Central Logic Board and finally the PMT bases, in charge of converting the analogue signal produced in the 31 3" PMTs into a Low Voltage Digital Signal.

  4. A 233 km tunnel for lepton and hadron colliders

    SciTech Connect

    Summers, D. J.; Cremaldi, L. M.; Datta, A.; Duraisamy, M.; Luo, T.; Lyons, G. T.

    2012-12-21

    A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of e{sup +}e{sup -}, pp-bar , and {mu}{sup +}{mu}{sup -} collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV e{sup +}e{sup -} colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV e{sup +}e{sup -} collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV pp-bar collider uses the high intensity Fermilab p-bar source, exploits high cross sections for pp-bar production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice.

  5. Determination of the Elastic Thickness of the Crust using GOES and LIDAR images

    NASA Astrophysics Data System (ADS)

    Taghavi, Farahnaz; Ghalenoiee, Samira; Ebrahim-zadeh Ardestani, Vahid

    2016-07-01

    In this study, to identify the elastic thickness (Te) of the crust, the local variations of the coherence between Bouguer gravity and topography in the three area included Canadian Shield region, Appalachian region, and Basin and Range region are determined. We use a coherence method based on Windowed Fourier Transform (WFT) under the assumption of an isotropic lithosphere. Data sources are selected from GOES and LIDAR images for Bouguer gravity and topography, respectively. First, the coherence distribution is calculated and then, the characteristic wavelengths are obtained where the coherence is 0.5. Results show that values of the elastic thickness of the lithosphere are 110km in the Canadian Shield region, 49km in the Appalachian region and 3.5km in the Basin and Range region. The results are in good agreement with the existing values calculated from other spectral methods. Key words: Effective elastic thickness, Coherence method, Bouguer gravity anomaly, topography, satellite images.

  6. Fermion localization on thick branes

    SciTech Connect

    Melfo, Alejandra; Pantoja, Nelson; Tempo, Jose David

    2006-02-15

    We consider chiral fermion confinement in scalar thick branes, which are known to localize gravity, coupled through a Yukawa term. The conditions for the confinement and their behavior in the thin-wall limit are found for various different BPS branes, including double walls and branes interpolating between different AdS{sub 5} spacetimes. We show that only one massless chiral mode is localized in all these walls, whenever the wall thickness is keep finite. We also show that, independently of wall's thickness, chiral fermionic modes cannot be localized in dS{sub 4} walls embedded in a M{sub 5} spacetime. Finally, massive fermions in double wall spacetimes are also investigated. We find that, besides the massless chiral mode localization, these double walls support quasilocalized massive modes of both chiralities.

  7. LTCC Thick Film Process Characterization

    DOE PAGESBeta

    Girardi, M. A.; Peterson, K. A.; Vianco, P. T.

    2016-05-01

    Low temperature cofired ceramic (LTCC) technology has proven itself in military/space electronics, wireless communication, microsystems, medical and automotive electronics, and sensors. The use of LTCC for high frequency applications is appealing due to its low losses, design flexibility and packaging and integration capability. Moreover, we summarize the LTCC thick film process including some unconventional process steps such as feature machining in the unfired state and thin film definition of outer layer conductors. The LTCC thick film process was characterized to optimize process yields by focusing on these factors: 1) Print location, 2) Print thickness, 3) Drying of tapes and panels,more » 4) Shrinkage upon firing, and 5) Via topography. Statistical methods were used to analyze critical process and product characteristics in the determination towards that optimization goal.« less

  8. Applications of film thickness equations

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.; Dowson, D.

    1983-01-01

    A number of applications of elastohydrodynamic film thickness expressions were considered. The motion of a steel ball over steel surfaces presenting varying degrees of conformity was examined. The equation for minimum film thickness in elliptical conjunctions under elastohydrodynamic conditions was applied to roller and ball bearings. An involute gear was also introduced, it was again found that the elliptical conjunction expression yielded a conservative estimate of the minimum film thickness. Continuously variable-speed drives like the Perbury gear, which present truly elliptical elastohydrodynamic conjunctions, are favored increasingly in mobile and static machinery. A representative elastohydrodynamic condition for this class of machinery is considered for power transmission equipment. The possibility of elastohydrodynamic films of water or oil forming between locomotive wheels and rails is examined. The important subject of traction on the railways is attracting considerable attention in various countries at the present time. The final example of a synovial joint introduced the equation developed for isoviscous-elastic regimes of lubrication.

  9. A unique approach to accurately measure thickness in thick multilayers.

    PubMed

    Shi, Bing; Hiller, Jon M; Liu, Yuzi; Liu, Chian; Qian, Jun; Gades, Lisa; Wieczorek, Michael J; Marander, Albert T; Maser, Jorg; Assoufid, Lahsen

    2012-05-01

    X-ray optics called multilayer Laue lenses (MLLs) provide a promising path to focusing hard X-rays with high focusing efficiency at a resolution between 5 nm and 20 nm. MLLs consist of thousands of depth-graded thin layers. The thickness of each layer obeys the linear zone plate law. X-ray beamline tests have been performed on magnetron sputter-deposited WSi(2)/Si MLLs at the Advanced Photon Source/Center for Nanoscale Materials 26-ID nanoprobe beamline. However, it is still very challenging to accurately grow each layer at the designed thickness during deposition; errors introduced during thickness measurements of thousands of layers lead to inaccurate MLL structures. Here, a new metrology approach that can accurately measure thickness by introducing regular marks on the cross section of thousands of layers using a focused ion beam is reported. This new measurement method is compared with a previous method. More accurate results are obtained using the new measurement approach. PMID:22514179

  10. Cratering and penetration experiments in teflon targets at velocities from 1 to 7 km/s

    NASA Technical Reports Server (NTRS)

    Horz, Friedrich; Cintala, Mark; Bernhard, Ronald P.; Cardenas, Frank; Davidson, William; Haynes, Gerald; See, Thomas H.; Winkler, Jerry; Knight, Jeffrey

    1994-01-01

    Approximately 20 sq m of protective thermal blankets, largely composed of Teflon, were retrieved from the Long Duration Exposure Facility after the spacecraft spent approximately 5.7 years in space. Examination of these blankets revealed that they contained thousands of hypervelocity impact features ranging from micron-sized craters to penetration holes several millimeters in diameter. We conducted impact experiments to reproduce such features and to understand the relationships between projectile size and the resulting crater or penetration hole diameter over a wide range of impact velocities. Such relationships are needed to derive the size and mass frequency distribution and flux of natural and man-made particles in low-earth orbit. Powder propellant and light-gas guns were used to launch soda-lime glass spheres into pure Teflon targets at velocities ranging from 1 to 7 km/s. Target thickness varied over more than three orders of magnitude from finite halfspace targets to very thin films. Cratering and penetration of massive Teflon targets is dominated by brittle failure and the development of extensive spall zones at the target's front and, if penetrated, the target's rear side. Mass removal by spallation at the back side of Teflon targets may be so severe that the absolute penetration hole diameter can become larger than that of a standard crater. The crater diameter in infinite halfspace Teflon targets increases, at otherwise constant impact conditions, with encounter velocity by a factor of V (exp 0.44). In contrast, the penetration hole size in very thin foils is essentially unaffected by impact velocity. Penetrations at target thicknesses intermediate to these extremes will scale with variable exponents of V. Our experimental matrix is sufficiently systematic and complete, up to 7 km/s, to make reasonable recommendations for velocity-scaling of Teflon craters and penetrations. We specifically suggest that cratering behavior and associated equations apply

  11. Kinematics of the New Zealand plate boundary: Relative motion by GPS across networks of 1000 km and 50 km spacing

    NASA Technical Reports Server (NTRS)

    Meertens, Charles M.; Rocken, Christian; Perin, Barbara; Walcott, Richard

    1993-01-01

    The NASA/DOSE 'Kinematics of the New Zealand Plate Boundary' experiment is a four-year cooperative Global Positioning System (GPS) experiment involving 6 universities and institutions in New Zealand and the United States. The investigation covers two scales, the first on the scale of plates (approximately 1000 km) and the second is on the scale of the plate boundary zone (approximately 50 km). In the first portion of the experiment, phase A, the objective is to make direct measurements of tectonic plate motion between the Australian and Pacific plates using GPS in order to determine the Euler vector of this plate pair. The phase A portion of this experiment was initiated in December 1992 with the first-epoch baseline measurements on the large scale network. The network will be resurveyed two years later to obtain velocities. The stations which were observed for phase A are shown and listed. Additional regional stations which will be used for this study are listed and are part of either CIGNET or other global tracking networks. The phase A portion of the experiment is primarily the responsibility of the UNAVCO investigators. Therefore, this report concentrates on phase A. The first year of NASA funding for phase A included only support for the field work. Processing and analysis will take place with the second year of funding. The second part of the experiemnt measured relative motion between the Australian and Pacific plates across the pate boundary zone between Hokitika and Christchurch on the South Island of New Zealand. The extent and rate of deformation will be determined by comparisons with historical, conventional surveys and by repeated GPS measurements to be made in two years. This activity was the emphasis of the LDGO portion of the study. An ancillary experiment, phase C, concentrated on plate boundary deformation in the vicinity of Wellington and was done as part of training during the early portion of the field campaign. Details of the objectives of the

  12. File Specification for the 7-km GEOS-5 Nature Run, Ganymed Release Non-Hydrostatic 7-km Global Mesoscale Simulation

    NASA Technical Reports Server (NTRS)

    da Silva, Arlindo M.; Putman, William; Nattala, J.

    2014-01-01

    This document describes the gridded output files produced by a two-year global, non-hydrostatic mesoscale simulation for the period 2005-2006 produced with the non-hydrostatic version of GEOS-5 Atmospheric Global Climate Model (AGCM). In addition to standard meteorological parameters (wind, temperature, moisture, surface pressure), this simulation includes 15 aerosol tracers (dust, sea-salt, sulfate, black and organic carbon), O3, CO and CO2. This model simulation is driven by prescribed sea-surface temperature and sea-ice, daily volcanic and biomass burning emissions, as well as high-resolution inventories of anthropogenic sources. A description of the GEOS-5 model configuration used for this simulation can be found in Putman et al. (2014). The simulation is performed at a horizontal resolution of 7 km using a cubed-sphere horizontal grid with 72 vertical levels, extending up to to 0.01 hPa (approximately 80 km). For user convenience, all data products are generated on two logically rectangular longitude-latitude grids: a full-resolution 0.0625 deg grid that approximately matches the native cubed-sphere resolution, and another 0.5 deg reduced-resolution grid. The majority of the full-resolution data products are instantaneous with some fields being time-averaged. The reduced-resolution datasets are mostly time-averaged, with some fields being instantaneous. Hourly data intervals are used for the reduced-resolution datasets, while 30-minute intervals are used for the full-resolution products. All full-resolution output is on the model's native 72-layer hybrid sigma-pressure vertical grid, while the reduced-resolution output is given on native vertical levels and on 48 pressure surfaces extending up to 0.02 hPa. Section 4 presents additional details on horizontal and vertical grids. Information of the model surface representation can be found in Appendix B. The GEOS-5 product is organized into file collections that are described in detail in Appendix C. Additional

  13. Synthesis of 2-arylamino substituted 5,6-dihydropyrido[2,3-d]pyrimidine-7(8H)-ones from arylguanidines.

    PubMed

    Galve, Iñaki; Puig de la Bellacasa, Raimon; Sánchez-García, David; Batllori, Xavier; Teixidó, Jordi; Borrell, José I

    2012-11-01

    A practical protocol was developed for the synthesis of 2-arylamino substituted 4-amino-5,6-dihydropyrido[2,3-d]pyrimidin-7(8H)-ones from α,β-unsaturated esters, malononitrile, and an aryl substituted guanidine via the corresponding 3-aryl-3,4,5,6- tetrahydropyrido[2,3-d]pyrimidin-7(8H)-ones. Such compounds are formed upon treatment of 2-methoxy-6-oxo-1,4,5,6-tetrahydropyridine-3-carbonitriles with an aryl substituted guanidine in 1,4-dioxane and are converted to the desired 4-aminopyridopyrimidines with NaOMe/MeOH through a Dimroth rearrangement. The overall yields of this three-step protocol are, generally speaking, higher than the multicomponent reaction, previously developed by our group, between an α,β-unsaturated ester, malononitrile, and an aryl substituted guanidine. PMID:23054532

  14. A high resolution (1 km) groundwater model for Indonesia

    NASA Astrophysics Data System (ADS)

    Sutanudjaja, Edwin; Verkaik, Jarno; de Graaf, Inge; van Beek, Rens; Erkens, Gilles; Bierkens, Marc

    2015-04-01

    Groundwater is important in many parts of Indonesia. It serves as a primary source of drinking water and industrial activities. During times of drought, it sustains water flows in streams, rivers, lakes and wetlands, and thus support ecosystem habitat and biodiversity as well as preventing hazardous forest fire. Besides its importance, groundwater is known as a vulnerable resource as unsustainable groundwater exploitation and management occurs in many areas of the country. Therefore, in order to ensure sustainable management of groundwater resources, monitoring and predicting groundwater changes in Indonesia are imperative. However, large extent groundwater models to assess these changes on a regional scale are almost non-existent and are hampered by the strong topographical and lithological transitions that characterize Indonesia. In this study, we built an 1 km resolution groundwater model for the entire Indonesian archipelago (total inland area: about 2 million km2). We adopted the approaches of Sutanudjaja et al. (2011, 2014a) and de Graaf et al. (2014) in order to make a MODFLOW (Harbaugh et al., 2000) groundwater model by using only global datasets. Aquifer schematization and properties of the groundwater model were developed from available global lithological maps (e.g. Dürr et al., 2005; Gleeson et al., 2011; Hartmann & Moorsdorf, 2012; Gleeson et al., 2014). We forced the groundwater model with the recent output of global hydrological model PCR-GLOBWB version 2.0 (Sutanudjaja et al., 2014b; van Beek et al., 2011), specifically the long term average of groundwater recharge and average surface water levels derived from channel discharge. Simulation results were promising. The MODFLOW model converged with realistic aquifer properties (i.e. transmissivities) and produced reasonable groundwater head spatial distribution reflecting the positions of major groundwater bodies and surface water bodies in the country. In Vienna, we aim to show and demonstrate these

  15. Estimation of Land Surface Temperature from 1-km AVHRR data

    NASA Astrophysics Data System (ADS)

    Frey, Corinne

    2016-04-01

    In order to re-process DLRs 1km AVHRR data archive to different geophysical and descriptive parameters of the land surface and the atmosphere, a series of scientific data processors are being developed in the framework of the TIMELINE project. The archive of DLR ranges back to the 80ies. One of the data processors is SurfTemp, which processes L2 LST and emissivity datasets from AVHRR L1b data. The development of the data processor included the selection of statistical procedures suitable for time series processing, including four mono-window and six split window algorithms. For almost all of these algorithms, new constants were generated, which better account for different atmospheric and geometric acquisition situations. The selection of optimal algorithms for SurfTemp is based on a round robin approach, in which the selected mono-window and split window algorithms are tested on the basis of a large number of TOA radiance/LST pairs, which were generated using a radiative transfer model and the SeeBorV5 profile database. The original LSTs are thereby compared to the LSTs derived from the TOA radiances using the mono- and split window algorithms. The algorithm comparison includes measures of precision, as well as the sensitivity of a method to the accuracy of its input data. The results of the round robin are presented, as well as the implementation of selected algorithms into SurfTemp. Further, first cross-validation results between the AVHRR LST and MODIS LST are shown.

  16. Gastrointestinal distress is common during a 161-km ultramarathon.

    PubMed

    Stuempfle, Kristin Jean; Hoffman, Martin Dean

    2015-01-01

    This study examined the incidence, severity, and timing of gastrointestinal (GI) symptoms in finishers and non-finishers of the 161-km Western States Endurance Run. A total of 272 runners (71.0% of starters) completed a post-race questionnaire that assessed the incidence and severity (none = 0, mild = 1, moderate = 2, severe = 3, very severe = 4) of 12 upper (reflux/heartburn, belching, stomach bloating, stomach cramps/pain, nausea, vomiting) and lower (intestinal cramps/pain, flatulence, side ache/stitch, urge to defecate, loose stool/diarrhoea, intestinal bleeding/bloody faeces) GI symptoms experienced during each of four race segments. GI symptoms were experienced by most runners (96.0%). Flatulence (65.9% frequency, mean value 1.0, s = 0.6 severity), belching (61.3% frequency, mean value 1.0, s = 0.6 severity), and nausea (60.3% frequency, mean value 1.0, s = 0.7 severity) were the most common symptoms. Among race finishers, 43.9% reported that GI symptoms affected their race performance, with nausea being the most common symptom (86.0%). Among race non-finishers, 35.6% reported that GI symptoms were a reason for dropping out of the race, with nausea being the most common symptom (90.5%). For both finishers and non-finishers, nausea was greatest during the most challenging and hottest part of the race. GI symptoms are very common during ultramarathon running, and in particular, nausea is the most common complaint for finishers and non-finishers. PMID:25716739

  17. Processing techniques for global land 1-km AVHRR data

    USGS Publications Warehouse

    Eidenshink, Jeffery C.; Steinwand, Daniel R.; Wivell, Charles E.; Hollaren, Douglas M.; Meyer, David

    1993-01-01

    The U.S. Geological Survey's (USGS) Earth Resources Observation Systems (EROS) Data Center (EDC) in cooperation with several international science organizations has developed techniques for processing daily Advanced Very High Resolution Radiometer (AVHRR) 1-km data of the entire global land surface. These techniques include orbital stitching, geometric rectification, radiometric calibration, and atmospheric correction. An orbital stitching algorithm was developed to combine consecutive observations acquired along an orbit by ground receiving stations into contiguous half-orbital segments. The geometric rectification process uses an AVHRR satellite model that contains modules for forward mapping, forward terrain correction, and inverse mapping with terrain correction. The correction is accomplished by using the hydrologic features coastlines and lakes from the Digital Chart of the World. These features are rasterized into the satellite projection and are matched to the AVHRR imagery using binary edge correlation techniques. The resulting coefficients are related to six attitude correction parameters: roll, roll rate, pitch, pitch rate, yaw, and altitude. The image can then be precision corrected to a variety of map projections and user-selected image frames. Because the AVHRR lacks onboard calibration for the optical wavelengths, a series of time-variant calibration coefficients derived from vicarious calibration methods and are used to model the degradation profile of the instruments. Reducing atmospheric effects on AVHRR data is important. A method has been develop that will remove the effects of molecular scattering and absorption from clear sky observations, using climatological measurements of ozone. Other methods to remove the effects of water vapor and aerosols are being investigated.

  18. The dipeptidyl peptidase inhibitor linagliptin and the angiotensin II receptor blocker telmisartan show renal benefit by different pathways in rats with 5/6 nephrectomy.

    PubMed

    Tsuprykov, Oleg; Ando, Ryotaro; Reichetzeder, Christoph; von Websky, Karoline; Antonenko, Viktoriia; Sharkovska, Yuliya; Chaykovska, Lyubov; Rahnenführer, Jan; Hasan, Ahmed A; Tammen, Harald; Alter, Markus; Klein, Thomas; Ueda, Seiji; Yamagishi, Sho-Ichi; Okuda, Seiya; Hocher, Berthold

    2016-05-01

    Dipeptidyl peptidase (DPP)-4 inhibitors delay chronic kidney disease (CKD) progression in experimental diabetic nephropathy in a glucose-independent manner. Here we compared the effects of the DPP-4 inhibitor linagliptin versus telmisartan in preventing CKD progression in non-diabetic rats with 5/6 nephrectomy. Animals were allocated to 1 of 4 groups: sham operated plus placebo; 5/6 nephrectomy plus placebo; 5/6 nephrectomy plus linagliptin; and 5/6 nephrectomy plus telmisartan. Interstitial fibrosis was significantly decreased by 48% with linagliptin but a non-significant 24% with telmisartan versus placebo. The urine albumin-to-creatinine ratio was significantly decreased by 66% with linagliptin and 92% with telmisartan versus placebo. Blood pressure was significantly lowered by telmisartan, but it was not affected by linagliptin. As shown by mass spectrometry, the number of altered peptide signals for linagliptin in plasma was 552 and 320 in the kidney. For telmisartan, there were 108 peptide changes in plasma and 363 in the kidney versus placebo. Linagliptin up-regulated peptides derived from collagen type I, apolipoprotein C1, and heterogeneous nuclear ribonucleoproteins A2/B1, a potential downstream target of atrial natriuretic peptide, whereas telmisartan up-regulated angiotensin II. A second study was conducted to confirm these findings in 5/6 nephrectomy wild-type and genetically deficient DPP-4 rats treated with linagliptin or placebo. Linagliptin therapy in wild-type rats was as effective as DPP-4 genetic deficiency in terms of albuminuria reduction. Thus, linagliptin showed comparable efficacy to telmisartan in preventing CKD progression in non-diabetic rats with 5/6 nephrectomy. However, the underlying pathways seem to be different. PMID:27083282

  19. The SMC-5/6 Complex and the HIM-6 (BLM) Helicase Synergistically Promote Meiotic Recombination Intermediate Processing and Chromosome Maturation during Caenorhabditis elegans Meiosis.

    PubMed

    Hong, Ye; Sonneville, Remi; Agostinho, Ana; Meier, Bettina; Wang, Bin; Blow, J Julian; Gartner, Anton

    2016-03-01

    Meiotic recombination is essential for the repair of programmed double strand breaks (DSBs) to generate crossovers (COs) during meiosis. The efficient processing of meiotic recombination intermediates not only needs various resolvases but also requires proper meiotic chromosome structure. The Smc5/6 complex belongs to the structural maintenance of chromosome (SMC) family and is closely related to cohesin and condensin. Although the Smc5/6 complex has been implicated in the processing of recombination intermediates during meiosis, it is not known how Smc5/6 controls meiotic DSB repair. Here, using Caenorhabditis elegans we show that the SMC-5/6 complex acts synergistically with HIM-6, an ortholog of the human Bloom syndrome helicase (BLM) during meiotic recombination. The concerted action of the SMC-5/6 complex and HIM-6 is important for processing recombination intermediates, CO regulation and bivalent maturation. Careful examination of meiotic chromosomal morphology reveals an accumulation of inter-chromosomal bridges in smc-5; him-6 double mutants, leading to compromised chromosome segregation during meiotic cell divisions. Interestingly, we found that the lethality of smc-5; him-6 can be rescued by loss of the conserved BRCA1 ortholog BRC-1. Furthermore, the combined deletion of smc-5 and him-6 leads to an irregular distribution of condensin and to chromosome decondensation defects reminiscent of condensin depletion. Lethality conferred by condensin depletion can also be rescued by BRC-1 depletion. Our results suggest that SMC-5/6 and HIM-6 can synergistically regulate recombination intermediate metabolism and suppress ectopic recombination by controlling chromosome architecture during meiosis. PMID:27010650

  20. The SMC-5/6 Complex and the HIM-6 (BLM) Helicase Synergistically Promote Meiotic Recombination Intermediate Processing and Chromosome Maturation during Caenorhabditis elegans Meiosis

    PubMed Central

    Hong, Ye; Sonneville, Remi; Agostinho, Ana; Meier, Bettina; Wang, Bin; Blow, J. Julian; Gartner, Anton

    2016-01-01

    Meiotic recombination is essential for the repair of programmed double strand breaks (DSBs) to generate crossovers (COs) during meiosis. The efficient processing of meiotic recombination intermediates not only needs various resolvases but also requires proper meiotic chromosome structure. The Smc5/6 complex belongs to the structural maintenance of chromosome (SMC) family and is closely related to cohesin and condensin. Although the Smc5/6 complex has been implicated in the processing of recombination intermediates during meiosis, it is not known how Smc5/6 controls meiotic DSB repair. Here, using Caenorhabditis elegans we show that the SMC-5/6 complex acts synergistically with HIM-6, an ortholog of the human Bloom syndrome helicase (BLM) during meiotic recombination. The concerted action of the SMC-5/6 complex and HIM-6 is important for processing recombination intermediates, CO regulation and bivalent maturation. Careful examination of meiotic chromosomal morphology reveals an accumulation of inter-chromosomal bridges in smc-5; him-6 double mutants, leading to compromised chromosome segregation during meiotic cell divisions. Interestingly, we found that the lethality of smc-5; him-6 can be rescued by loss of the conserved BRCA1 ortholog BRC-1. Furthermore, the combined deletion of smc-5 and him-6 leads to an irregular distribution of condensin and to chromosome decondensation defects reminiscent of condensin depletion. Lethality conferred by condensin depletion can also be rescued by BRC-1 depletion. Our results suggest that SMC-5/6 and HIM-6 can synergistically regulate recombination intermediate metabolism and suppress ectopic recombination by controlling chromosome architecture during meiosis. PMID:27010650

  1. Seismotectonics and Crustal Thickness of Northwest Mindoro, Philippines

    NASA Astrophysics Data System (ADS)

    Chen, P. F.; Olavere, E. A.; Lee, K. M.; Bautista, B.; Solidum, R., Jr.; Huang, B. S.

    2015-12-01

    Mindoro Island locates where the Palawan Continental Block (PCB) indented into the Philippine Mobile Belt (PMB) during the Early Miocene and where the Manila Trench terminates, having ceased convergence due to collision. On the transition from subduction to collision, Northwest Mindoro exhibits vigorous seismic activity and has been debated about its affiliation being PCB or PMB. Here, we use data from both the EHB and Global Centroid Moment Tensor catalogues to study the regional seismotectonics. We also deployed five broadband stations to probe the crustal thickness beneath NW Mindoro using receiver function analysis. Results show that, following the southeasterly reduction of convergence rates at the southern termination of the Manila Trench, the slab dipping angles steepen, were initiated at depth (~200 km) and propagate upwards. The horizontal distances of the trench and slab, as measured from the Wadati-Benioff zone at 200 km depth, also reduce in a southeasterly direction. Observations of intermediate-depth earthquakes that exhibit predominantly down-dip extensional stress patterns attest that the steepening of slab dipping angles is due to the negative buoyancy of the slab. Preliminary results of receiver function analysis suggest that the crustal thickness beneath NW Mindoro is about 40 km and is probably PCB affiliated.

  2. Response of mantle transition zone thickness to plume buoyancy flux

    NASA Astrophysics Data System (ADS)

    Das Sharma, S.; Ramesh, D. S.; Li, X.; Yuan, X.; Sreenivas, B.; Kind, R.

    2010-01-01

    The debate concerning thermal plumes in the Earth's mantle, their geophysical detection and depth characterization remains contentious. Available geophysical, petrological and geochemical evidence is at variance regarding the very existence of mantle plumes. Utilizing P-to-S converted seismic waves (P receiver functions) from the 410 and 660 km discontinuities, we investigate disposition of these boundaries beneath a number of prominent hotspot regions. The thickness of the mantle transition zone (MTZ), measured as P660s-P410s differential times (tMTZ), is determined. Our analyses suggest that the MTZ thickness beneath some hotspots correlates with the plume strength. The relationship between tMTZ, in response to the thermal perturbation, and the strength of plumes, as buoyancy flux B, follows a power law. This B-tMTZ behavior provides unprecedented insights into the relation of buoyancy flux and excess temperature at 410-660 km depth below hotspots. We find that the strongest hotspots, which are located in the Pacific, are indeed plumes originating at the MTZ or deeper. According to the detected power law, even the strongest plumes may not shrink the transition zone by significantly more than ~40 km (corresponding to a maximum of 300-400° excess temperature).

  3. Supplementing lactating dairy cows with a vitamin B12 precursor, 5,6-dimethylbenzimidazole, increases the apparent ruminal synthesis of vitamin B12.

    PubMed

    Brito, A; Chiquette, J; Stabler, S P; Allen, R H; Girard, C L

    2015-01-01

    Cobalamin (CBL), the biologically active form of vitamin B12, and its analogs, are produced by bacteria only if cobalt supply is adequate. The analogs differ generally by the nucleotide moiety of the molecule. In CBL, 5,6-dimethylbenzimidazole (5,6-DMB) is the base in the nucleotide moiety. The present study aimed to determine if a supplement of 5,6-DMB could increase utilization of dietary cobalt for synthesis of CBL and change ruminal fermentation, nutrient digestibility, omasal flow of nutrients and ruminal protozoa counts. Eight ruminally cannulated multiparous Holstein cows (mean±standard deviation=238±21 days in milk and 736±47 kg of BW) were used in a crossover design. Cows were randomly assigned to a daily supplement of a gelatin capsule containing 1.5 g of 5,6-DMB via the rumen cannula or no supplement. Each period lasted 29 days and consisted of 21 days for treatment adaptation and 8 days for data and samples collection. Five corrinoids, CBL and four cobamides were detected in the total mixed ration and the omasal digesta from both treatments. The dietary supplement of 5,6-DMB increased (P=0.02) apparent ruminal synthesis of CBL from 14.6 to 19.6 (s.e.m. 0.8) mg/day but had no effect (P>0.1) on apparent ruminal synthesis of the four analogs. The supplement of 5,6-DMB had no effect (P>0.1) on milk production and composition, or on protozoal count, ruminal pH and concentrations of volatile fatty acids and ammonia nitrogen in rumen content. The supplement had also no effect (P>0.1) on intake, omasal flow and apparent ruminal digestibility of dry matter, organic matter, NDF, ADF and nitrogenous fractions. Plasma concentration of CBL was not affected by treatments (P=0.98). Providing a preformed part of the CBL molecule, that is, 5,6-DMB, increased by 34% the apparent ruminal synthesis of CBL by ruminal bacteria but had no effect on ruminal fermentation or protozoa count and it was not sufficient to increase plasma concentrations of the vitamin. Even though

  4. Eddy current thickness measurement apparatus

    DOEpatents

    Rosen, Gary J.; Sinclair, Frank; Soskov, Alexander; Buff, James S.

    2015-06-16

    A sheet of a material is disposed in a melt of the material. The sheet is formed using a cooling plate in one instance. An exciting coil and sensing coil are positioned downstream of the cooling plate. The exciting coil and sensing coil use eddy currents to determine a thickness of the solid sheet on top of the melt.

  5. K--Ar dating, geological and paleomagnetic study of a 5-KM lava succession in northern Iceland

    SciTech Connect

    Saemundsson, K.; Kristjansson, L.; McDougall, I.; Watkins, N.D.

    1980-07-10

    A 5-km section of basalt lavas exposed at Troellaskagi on the western flank of the Eyjafjoerdur structural dome in northern Iceland has been subjected to K--Ar age and paleomagnetic analysis from which detailed results are tabulated (34 dated lavas, 455 paleomagnetic directions). The upper 4 km of the sequence was erupted between about 11 and 9 m.y. ago. The rate of growth of the lava pile changed about 9.5 m.y. ago. Growth rates in the lower part were of the order of 1 km/m.y., whereas growth rates in the upper part may have been as high as 4 km/m.y. A 1.8 km-thick normal polarity interval in the middle part of the section is correlated with marine magnetic anomaly 5. A good match is observed between the polarity sequence of the Troellaskagi section and the marine magnetic polarity pattern above and below anamaly 5. Regression analysis of the K-Ar data gives an age of 10.5 m.y. for the older boundary of anomaly 5 but a questionable o.3-m.y. age for its younger limit. Structural characteristics of the lava pile indicate that eruption of the sequence was associated with a now extinct rift axis in the western part of northern Iceland. Low-lattice virtual poles are more prevalent in this survey than in two comparable recent surveys on younger Icelandic lavas and much more common than may be expected from a Fisherian distribution. There is no evidence to confirm that such transitional poles are predominantly due to nondipole fields. No significant difference was found in overall strength or stability between normal and reverse geomagnetic fields, as recorded in over 1000 lava flows in Iceland.

  6. Thick resist for MEMS processing

    NASA Astrophysics Data System (ADS)

    Brown, Joe; Hamel, Clifford

    2001-11-01

    The need for technical innovation is always present in today's economy. Microfabrication methods have evolved in support of the demand for smaller and faster integrated circuits with price performance improvements always in the scope of the manufacturing design engineer. The dispersion of processing technology spans well beyond IC fabrication today with batch fabrication and wafer scale processing lending advantages to MEMES applications from biotechnology to consumer electronics from oil exploration to aerospace. Today the demand for innovative processing techniques that enable technology is apparent where only a few years ago appeared too costly or not reliable. In high volume applications where yield and cost improvements are measured in fractions of a percent it is imperative to have process technologies that produce consistent results. Only a few years ago thick resist coatings were limited to thickness less than 20 microns. Factors such as uniformity, edge bead and multiple coatings made high volume production impossible. New developments in photoresist formulation combined with advanced coating equipment techniques that closely controls process parameters have enable thick photoresist coatings of 70 microns with acceptable uniformity and edge bead in one pass. Packaging of microelectronic and micromechanical devices is often a significant cost factor and a reliability issue for high volume low cost production. Technologies such as flip- chip assembly provide a solution for cost and reliability improvements over wire bond techniques. The processing for such technology demands dimensional control and presents a significant cost savings if it were compatible with mainstream technologies. Thick photoresist layers, with good sidewall control would allow wafer-bumping technologies to penetrate the barriers to yield and production where costs for technology are the overriding issue. Single pass processing is paramount to the manufacturability of packaging

  7. Using a New Crustal Thickness Model to Test Previous Candidate Lunar Basins and to Search for New Candidates

    NASA Technical Reports Server (NTRS)

    Meyer, H. M.; Frey, H. V.

    2012-01-01

    A new crustal thickness model was used to test the viability of 110 candidate large lunar basins previously identified using older topographic and crustal thickness data as well as photogeologic data. The new model was also used to search for new candidate lunar basins greater than 300 km in diameter. We eliminated 11 of 27 candidates previously identified in the older crustal thickness model, and found strong evidence for at least 8 new candidates.

  8. PHOTOLYSIS RATES OF (2,4,5-TRICHLOROPHENOXY)ACETIC ACID AND 4-AMINO-3,5,6-TRICHLOROPICOLINIC ACID IN NATURAL WATERS

    EPA Science Inventory

    Photoreactions of (2,45-trichlorophenoxy) acetic acid (2,4,5-T) and 4-amino-3,5,6-trichloropicolinic acid (picloram) were studied in distilled water, natural water samples, fulvic acid solutions, and solutions containing iron (III) and/or hydrogen peroxide to determine the effect...

  9. Predictors of urinary levels of 2,4-dichlorophenoxyacetic acid, 3,5,6-trichloro-2-pyridinol, 3-phenoxybenzoic acid, and pentachlorophenol in 121 adults in Ohio

    EPA Science Inventory

    Limited data exist on the driving factors that influence the non-occupational exposures of adults to pesticides using urinary biomonitoring. In this work, the objectives were to quantify the urinary levels of 2,4-dichlorophenoxyacetic acid (2,4-D), 3,5,6-trichloro-2-pyridinol (TC...

  10. A ONE STEP METHOD FOR THE DETERMINATION OF CARBAMATE PESTICIDES BY DERIVATIZATION WITH ALPHA-BROMO-2,3,4,5,6-PENTAFLUOROTOLUENE

    EPA Science Inventory

    A procedure was developed for the determination of trace quantities of a broad range of carbamate pesticides. The carbamates were hydrolyzed and derivatized in a single step, using alkali and alpha-bromo-2,3,4,5,6-pentafluorotoluene (PFBB), and were subsequently analyzed using el...

  11. The Effect Inclusive Education Practice during Preschool Has on the Peer Relations and Social Skills of 5-6-Year Olds with Typical Development

    ERIC Educational Resources Information Center

    Ogelman, Hulya Gulay; Secer, Zarife

    2012-01-01

    The purpose of this study is to set forth the effect preschool inclusive education practices have on the peer relations of 5-6 year olds with typical development. The study comprised of two sample groups. The children in both groups were attendees of kindergartens at primary schools governed by the Ministry of National Education located in the…

  12. Analysing Mothers' Self-Efficacy Perception towards Parenting in Relation to Peer Relationships of 5-6 Year-Old Preschool Children

    ERIC Educational Resources Information Center

    Secer, Zarife; Gulay Ogelman, Hulya; Onder, Alev; Berengi, Semra

    2012-01-01

    The purpose of this study was to investigate the effect of self-efficacy perception of mothers' towards parenting on the peer relations of children aged between 5 and 6. The sample group of this study comprised of 200, 5-6 year old children (girls = 96, boys = 104), and their mothers. The Ladd and Profilet Child Behaviour Scale, the Peer…

  13. Synthesis and anti-inflammatory activity of 5-(6-methyl-2-substituted 4-pyrimidinyloxymethyl)-1,3,4-oxadiazole-2-thiones and their 3-morpholinomethyl derivatives.

    PubMed

    Jakubkiene, Virginija; Burbuliene, Milda Malvina; Mekuskiene, Giedrute; Udrenaite, Emilija; Gaidelis, Povilas; Vainilavicius, Povilas

    2003-04-01

    The synthesis of 5-(6-methyl-2-substituted 4-pyrimidinyloxymethyl)-2,3-dihydro-1,3,4-oxadiazole-2-thiones and their 3-morpholinomethyl derivatives and the results of anti-inflammatory activity in vivo are described. Most of the tested compounds exhibited anti-inflammatory activity and some of them were more active than acetylsalicylic acid. PMID:12727542

  14. CHLORPYRIFOS AND 3,5,6 TRICHLORO-2-PYRIDINOL DISTRIBUTION IN RAT BLOOD AND BRAIN DURING CHRONIC DIETARY AND REPEATED HIGH LEVEL ACUTE EXPOSURE TO CHLORPYRIFOS.

    EPA Science Inventory

    The aim of this study was to determine the concentrations of an organophosphorus pesticide, chlorpyrifos (CPF), and the metabolite 3,5,6 trichloro-2-pyridinol (TCP) in tissues from rats exposed to long-term, low-dose CPF. Adult, Long-Evans male rats received CPF for one year at ...

  15. EXPOSURE OF PRESCHOOL CHILDREN TO CHLORPYRIFOS AND ITS DEGRADATION PRODUCT 3,5,6-TRICHLORO-2-PYRIDINOL IN THEIR EVERYDAY ENVIRONMENTS

    EPA Science Inventory

    As part of the Children's Total Exposure to Persistent Pesticides and Other Persistent Organic Pollutants (CTEPP) study, we investigated the exposures of preschool children to chlorpyrifos and its degradation product 3,5,6-trichloro-2-pyridinol (TCP) in their everyday environment...

  16. Constraining the thickness of Europa's water-ice shell: Insights from tidal dissipation and conductive cooling

    NASA Astrophysics Data System (ADS)

    Quick, Lynnae C.; Marsh, Bruce D.

    2015-06-01

    The time of crystallization of a 100 km thick ocean on Europa is estimated using a Stefan-style solidification solution. This solution is then extended to estimate the present thickness of the ice shell. It is assumed that the shell is initially in a steady-state conductive regime, and the ocean is taken to be an infinite liquid half space cooling from above. We find that in the absence of tidal heating and without the presence of low-eutectic impurities to serve as anti-freezes, a 100 km thick ocean solidifies in about 64 Myr. Conversely, when considering the present thickness of Europa's ice shell, if tidal heating is included at a global dissipation rate of ∼1 TW, the shell is found to be, on average, approximately 28 km thick. However, if this dissipative heating is solely restricted to the shell, the local rate of heating may vary significantly due to crustal compositional heterogeneities and it is shown that this process may, in turn, produce thermal maxima in the crust, which could lead to local melting and structural instabilities, perhaps associated with the formation of chaos regions. Our approach is also extended to Ganymede and Callisto in order to estimate the time of solidification of their putative subsurface oceans and the current thicknesses of their ice-I shells.

  17. A comparison of mammographic systems for different breast thicknesses using model observer detectability

    NASA Astrophysics Data System (ADS)

    Van Peteghem, Nelis; Salvagnini, Elena; Bosmans, Hilde; Cockmartin, Lesley; Marshall, Nicholas W.

    2015-03-01

    This work investigated image quality as a function of PMMA thickness on a variety of mammography systems. Image quality was quantified by calculating detectability (d') using a non-prewhitening with eye filter model observer (NPWE) from routinely acquired quality control (QC) data of twelve digital radiography (DR) systems. The sample of systems included two mammography devices equipped with the Siemens PRIME upgrade and one system with the Claymount SmartBucky detector. The d' data were calculated for a 0.1 and 0.25 mm diameter gold discs using images of homogeneous PMMA (thickness from 2 to 7 cm), all from the routinely performed AEC test. The GE Essential systems had the highest d' values for low thicknesses and the lowest d' values for high thicknesses. The Hologic Selenia Dimension systems had the most constant detectability curve, ensuring high d' values at high thicknesses. This was achieved by increasing the mean glandular dose (MGD) at higher thicknesses compared to the other systems. The Siemens PRIME and the Claymount system detectability results were comparable to the standard FFDM systems. Mean glandular dose at 5, 6 and 7 cm PMMA and gold threshold thickness at 5 cm PMMA were also evaluated. The Claymount system had a high (but acceptable) threshold gold thickness (T) compared to the other systems. This was probably caused by the low dose at which this DR detector operates. Results of NPWE d' and CDMAM analysis showed the same trends.

  18. Quantifying Uncertainties in Tephra Thickness and Volume Estimates

    NASA Astrophysics Data System (ADS)

    Engwell, S. L.; Aspinall, W.; Sparks, R. S.

    2013-12-01

    Characterization of explosive volcanic eruptive processes from interpretations of deposits is a key to assessing long-term volcanic hazards and risks, particularly for large explosive eruptions which occur relatively infrequently and others whose deposits, particularly distal deposits, are transient in the geological record. Whilst eruption size - determined by measurement and interpretation of tephra fall deposits - is of particular importance, uncertainties for such measurements and volume estimates are rarely presented. In this study, we quantify the main sources of variance in determining tephra volume from thickness measurements and isopachs in terms of number and spatial distribution of such measurements, using the Fogo A deposit, São Miguel, Azores as an example. Analysis of Fogo A fall deposits show measurement uncertainties are approximately 9 % of measured thickness while uncertainty associated with natural deposit variability ranges between 10 % and 40 % of average thickness, with an average variation of 30 %. Correlations between measurement uncertainties and natural deposit variability are complex and depend on a unit's thickness, position within a succession and distance from source and local topography. The degree to which thickness measurement errors impact on volume uncertainty depends on the number of measurements in a given dataset and their associated individual uncertainties. For Fogo A, the consequent uncertainty in volume associated with thickness measurement uncertainty is 1.3 %, equivalent to a volume uncertainty of 1.5 × 0.02 km3. Uncertainties also arise in producing isopach maps: the spatial relationships between source location and different deposit thicknesses are described by contours subjectively drawn to encompass measurements of a given thickness, generally by eye. Recent advances in volume estimation techniques involve the application of mathematical models directly to tephra thickness data. Here, uncertainties in tephra volumes

  19. Focusing of relative plate motion at a continental transform fault: Cenozoic dextral displacement >700 km on New Zealand's Alpine Fault, reversing >225 km of Late Cretaceous sinistral motion

    NASA Astrophysics Data System (ADS)

    Lamb, Simon; Mortimer, Nick; Smith, Euan; Turner, Gillian

    2016-03-01

    The widely accepted ˜450 km Cenozoic dextral strike-slip displacement on New Zealand's Alpine Fault is large for continental strike-slip faults, but it is still less than 60% of the Cenozoic relative plate motion between the Australian and Pacific plates through Zealandia, with the remaining motion assumed to be taken up by rotation and displacement on other faults in a zone up to 300 km wide. We show here that the 450 km total displacement across the Alpine Fault is an artifact of assumptions about the geometry of New Zealand's basement terranes in the Eocene, and the actual Cenozoic dextral displacement across the active trace is greater than 665 km, with more than 700 km (and <785 km since 25 Ma) occurring in a narrow zone less than 10 km wide. This way, the Alpine Fault has accommodated almost all (>94%) of the relative plate motion in the last 25 Ma at an average rate in excess of 28 mm/yr. It reverses more than 225 km (and <300 km) of sinistral shear through Zealandia in the Late Cretaceous, when Zealandia lay on the margin of Gondwana, providing a direct constraint on the kinematics of extension between East and West Antarctica at this time.

  20. Mineral bone disorder in chronic kidney disease: head-to-head comparison of the 5/6 nephrectomy and adenine models

    PubMed Central

    2014-01-01

    Background Experimental models are important to the understanding of the pathophysiology of, as well as the effects of therapy on, certain diseases. In the case of chronic kidney disease-mineral bone disorder, there are currently two models that are used in evaluating the disease: 5/6 nephrectomy (Nx) and adenine-induced renal failure (AIRF). However, the two models have never been compared in studies using animals maintained under similar conditions. Therefore, we compared these two models, focusing on the biochemical, bone histomorphometry, and vascular calcification aspects. Methods Wistar rats, initially fed identical diets, were divided into two groups: those undergoing 5/6 Nx (5/6Nx group) and those that were switched to an adenine-enriched diet (AIRF group). After 9 weeks, animals were sacrificed, and we conducted biochemical and bone histomorphometry analyses, as well as assessing vascular calcification. Results At sacrifice, the mean body weight was higher in the 5/6Nx group than in the AIRF group, as was the mean blood pressure. No differences were seen regarding serum phosphate, ionized calcium, intact parathyroid hormone (PTH), or fibroblast growth factor 23 (FGF23). However, creatinine clearance was lower and fractional excretion of phosphate (FeP) was higher in the AIRF group rats, which also had a more severe form of high-turnover bone disease. Vascular calcification, as evaluated through von Kossa staining, was not observed in any of the animals. Conclusions Overt vascular calcification was not seen in either model as applied in this study. Under similar conditions of diet and housing, the AIRF model produces a more severe form of bone disease than does 5/6 Nx. This should be taken into account when the choice is made between these models for use in preclinical studies. PMID:24885705

  1. Rutin ameliorates renal fibrosis and proteinuria in 5/6-nephrectomized rats by anti-oxidation and inhibiting activation of TGFβ1-smad signaling

    PubMed Central

    Han, Yu; Lu, Jin-Shan; Xu, Yong; Zhang, Lei; Hong, Bao-Fa

    2015-01-01

    Objectives: Rutin, a polyphenolic flavonoid, was reported to have beneficial effect on drug induced nephropathy. The present study aimed to introduce 5/6 nephrectomized rat model to further evaluate its renal protective effect. Methods: Adult Wistar rats were induced to develop chronic renal failure through 5/6 nephrectomy (5/6 Nx). After that, animals were treated orally with saline, rutin at 15 and 45 mg/kg, and losartan (10 mg/kg) daily for 20 weeks; sham-operated animals were also involved as control. After treatment for 8 and 20 weeks, blood and urine samples were collected for biochemical examination; all the kidney remnants were collected for histological examination. The protein levels of TGF-β1, smad2 and phosphorylated-smad2 (p-smad2) in kidney were measured. Immunohistochemistry was used to analyze the expression of TGF-β1, fibronectin and collagen IV in kidney tissues. Results: Results suggested that rutin could reduce the proteinurea, blood urine nitrogen and blood creatinine in 5/6 Nx animals significantly, as well as oxidation stress in the kidney. By histological examination, rutin administration alleviated glomerular sclerosis scores and tubulointerstitial injuries in a dose-dependent manner (P<0.01). Immunohistochemistry also suggested rutin could reduce the expression of TGF-β1, fibronectin and collagen IV in kidney tissues. By western blot, we found the rutin could reduce the TGF-β1, p-smad2 expression in the kidney tissues of rats. Conclusions: This study suggests that the rutin can improve renal function in 5/6 Nx rats effectively. Its effect may be due to its anti-oxidation and inhibiting TGFβ1-Smad signaling. PMID:26191162

  2. Inhibition of the Smc5/6 Complex during Meiosis Perturbs Joint Molecule Formation and Resolution without Significantly Changing Crossover or Non-crossover Levels

    PubMed Central

    Lilienthal, Ingrid; Kanno, Takaharu; Sjögren, Camilla

    2013-01-01

    Meiosis is a specialized cell division used by diploid organisms to form haploid gametes for sexual reproduction. Central to this reductive division is repair of endogenous DNA double-strand breaks (DSBs) induced by the meiosis-specific enzyme Spo11. These DSBs are repaired in a process called homologous recombination using the sister chromatid or the homologous chromosome as a repair template, with the homolog being the preferred substrate during meiosis. Specific products of inter-homolog recombination, called crossovers, are essential for proper homolog segregation at the first meiotic nuclear division in budding yeast and mice. This study identifies an essential role for the conserved Structural Maintenance of Chromosomes (SMC) 5/6 protein complex during meiotic recombination in budding yeast. Meiosis-specific smc5/6 mutants experience a block in DNA segregation without hindering meiotic progression. Establishment and removal of meiotic sister chromatid cohesin are independent of functional Smc6 protein. smc6 mutants also have normal levels of DSB formation and repair. Eliminating DSBs rescues the segregation block in smc5/6 mutants, suggesting that the complex has a function during meiotic recombination. Accordingly, smc6 mutants accumulate high levels of recombination intermediates in the form of joint molecules. Many of these joint molecules are formed between sister chromatids, which is not normally observed in wild-type cells. The normal formation of crossovers in smc6 mutants supports the notion that mainly inter-sister joint molecule resolution is impaired. In addition, return-to-function studies indicate that the Smc5/6 complex performs its most important functions during joint molecule resolution without influencing crossover formation. These results suggest that the Smc5/6 complex aids primarily in the resolution of joint molecules formed outside of canonical inter-homolog pathways. PMID:24244180

  3. Accurate thickness measurement of graphene

    NASA Astrophysics Data System (ADS)

    Shearer, Cameron J.; Slattery, Ashley D.; Stapleton, Andrew J.; Shapter, Joseph G.; Gibson, Christopher T.

    2016-03-01

    Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.

  4. Preparation of thick molybdenum targets

    NASA Technical Reports Server (NTRS)

    Singh, J. J.

    1974-01-01

    Thick natural molybdenum deposits on nickel plated copper substrates were prepared by thermal decomposition of molybdenum hexacarbonyl vapors on a heated surface in an inert gas atmosphere. The molybdenum metal atoms are firmly bonded to the substrate atoms, thus providing an excellent thermal contact across the junction. Molybdenum targets thus prepared should be useful for internal bombardment in a cyclotron where thermal energy inputs can exceed 10 kW.

  5. Soliton models for thick branes

    NASA Astrophysics Data System (ADS)

    Peyravi, Marzieh; Riazi, Nematollah; Lobo, Francisco S. N.

    2016-05-01

    In this work, we present new soliton solutions for thick branes in 4+1 dimensions. In particular, we consider brane models based on the sine-Gordon (SG), φ 4 and φ 6 scalar fields, which have broken Z2 symmetry in some cases and are responsible for supporting and stabilizing the thick branes. The origin of the symmetry breaking in these models resides in the fact that the modified scalar field potential may have non-degenerate vacua. These vacua determine the cosmological constant on both sides of the brane. We also study the geodesic equations along the fifth dimension, in order to explore the particle motion in the neighborhood of the brane. Furthermore, we examine the stability of the thick branes, by determining the sign of the w^2 term in the expansion of the potential for the resulting Schrödinger-like equation, where w is the five-dimensional coordinate. It turns out that the φ ^4 brane is stable, while there are unstable modes for certain ranges of the model parameters in the SG and φ ^6 branes.

  6. Central Corneal Thickness in Children

    PubMed Central

    2011-01-01

    Objective To report the central corneal thickness (CCT) in healthy white, African-American, and Hispanic children from birth to 17 years of age. Design Prospective observational multicenter study. Central corneal thickness was measured with a hand-held contact pachymeter. Results Two thousand seventy-nine children were included in the study, with ages ranging from day of birth to 17 years. Included were 807 white, 494 Hispanic, and 474 African-American individuals, in addition to Asian, unknown and mixed race individuals. African-American children had thinner corneas on average than that of both white (p< .001) and Hispanic children (p< .001) by approximately 20 micrometers. Thicker median CCT was observed with each successive year of age from age 1 to 11 years, with year-to-year differences steadily decreasing and reaching a plateau after age 11 at 573 micrometers in white and Hispanic children and 551 micrometers in African-American children. For every 100 micrometers of thicker CCT measured, the intraocular pressure was 1.5 mmHg higher on average (p< 0.001). For every diopter of increased myopic refractive error (p< 0.001) CCT was 1 micrometer thinner on average. Conclusions Median CCT increases with age from 1 to 11 years with the greatest increase present in the youngest age groups. African-American children on average have thinner central corneas than white and Hispanic children, while white and Hispanic children demonstrate similar central corneal thickness. PMID:21911662

  7. Measuring Metal Thickness With an Electric Probe

    NASA Technical Reports Server (NTRS)

    Shumka, A.

    1986-01-01

    Thickness of metal parts measured from one side with aid of Kelvin probe. Method developed for measuring thickness of end plate on sealed metal bellows from outside. Suitable for thicknesses of few thousandth's of inch (few hundred micrometers). Method also used to determine thickness of metal coatings applied by sputtering, electroplating, and flame spraying.

  8. Measuring Rind Thickness on Polyurethane Foam

    NASA Technical Reports Server (NTRS)

    Johnson, C.; Miller, J.; Brown, H.

    1985-01-01

    Nondestructive test determines rind thickness of polyurethane foam. Surface harness of foam measured by Shore durometer method: hardness on Shore D scale correlates well with rind thickness. Shore D hardness of 20, for example, indicates rind thickness of 0.04 inch (1 millimeter). New hardness test makes it easy to determine rind thickness of sample nondestructively and to adjust fabrication variables accordingly.

  9. Effect of Varying Crustal Thickness on CHAMP Geopotential Data

    NASA Technical Reports Server (NTRS)

    Taylor, P. T.; Kis, K. I.; vonFrese, R. R. B.; Korhonen, J. V.; Wittmann, G.; Kim, H. R.; Potts, L. V.

    2003-01-01

    To determine the effect of crustal thickness variation on satellite-altitude geopotential anomalies we compared two regions of Europe with vastly different values, Central/Southern Finland and the Pannonian Basin. Crustal thickness exceeds 62 km in Finland and is less than 26 km in the Pannonian Basin. Heat-flow maps indicate that the thinner and more active crust of the Pannonian Basin has a value nearly three times that of the Finnish Svecofennian Province. Ground based gravity mapping in Hungary shows that the free-air gravity anomalies across the Pannonian Basin are near 0 to +20 mGal with shorter wavelength anomalies from +40 to less than +60 mGal and some 0 to greater than -20 mGal. Larger anomalies are detected in the mountainous areas. The minor value anomalies can indicate the isostatic equilibrium for Hungary (the central part of the Pannonian Basin). Gravity data over Finland are complicated by de-glaciation. CHAMP gravity data (400 km) indicates a west-east positive gradient of greater than 4 mGal across Central/Southern Finland and an ovoid positive anomaly (approximately 4 mGal) quasi-coincidental with the magnetic anomaly traversing the Pannonian Basin. CHAMP magnetic data (425 km) reveal elongated semicircular negative anomalies for both regions with South-Central Finland having larger amplitude (less than -6 nT) than that over the Pannonian Basin, Hungary (less than -5 nT). In both regions subducted oceanic lithosphere has been proposed as the anomalous body.

  10. Arctic sea ice volume and thickness: trends and observations

    NASA Astrophysics Data System (ADS)

    Kwok, Ronald

    The sea ice extent of the Northern Hemisphere has been declining at an average rate of ˜3% per decade over the satellite record (1978-present) and the summer decline seems to be accelerating (Comiso et al., 2008). In September 2007, the summer ice extent reached a record minimum of 4.2×106 km2, which was 1.6×106 km2 or 23% less than the previous record set in September 2005. The loss of old ice is occurring at an even higher rate of ˜10% per decade. In addition to these remarkable trends in summer ice coverage, combined submarine and satellite records show a parallel thinning of the central Arctic ice cover from a winter thickness of 3.64 m in 1980 to only 1.89 m by 2008, a net decrease of 1.75 m or 48% in thickness (Kwok and Rothrock, 2009). More than two-thirds of the Arctic is now covered by thinner seasonal ice. If current rates persist, both trajectories point to the potential of ice-free summers in the not too distant future. Recent thickness observations from ICESat-1 have also provided a short record of the total sea ice volume of the Arctic Ocean -an important indicator of the state of the sea ice system. However, sustaining a capability to construct a long-term climate record of thickness and volume is a challenge. At this writing, ICESat-1 is near the end of its mission life and CryoSat-2 is about to be launched. CryoSat-2 is designed to have a mission life of 3 years that would likely end prior to launch of ICESat-II in ˜2015. Cross-calibration of the ICESat and CryoSat-2 (and eventually ICESat-II) ice thickness estimates is needed for linking the two data sets to extend the record of the seasonal, interannual, and decadal trends in thickness and volume. This is crucial for understanding the trends, process studies, as well as for improvement of long-term climate projections. Through this decade, there will be gaps in observations that need to be bridged with airborne assets augmented perhaps other new approaches to measure sea ice thickness. In

  11. Decameter thick remnant glacial ice deposits on Mars

    NASA Astrophysics Data System (ADS)

    Conway, Susan J.; Balme, Matthew R.

    2014-08-01

    On Mars, a smooth, draping unit—the "latitude-dependant mantle" (LDM), believed to comprise meter thick layers of dust and ice—extends from the midlatitudes to the poles, covering at least 23% of the surface. We show that the LDM can be 30 m deep on pole-facing crater walls, and by measuring the erosional and depositional volumes of small gullies that incise these LDM deposits, we show that it must contain between 46% and 95% ice by volume. Extrapolating to a global scale, these deposits account for ~104 km3 of near-surface ice, doubling previous LDM volume estimates. Thick LDM deposits can be emplaced during the many orbital variation-driven climate excursions that occurred during the Amazonian period. We suggest that LDM deposits are similar to ice sheets composed of massive ice with a surface lag.

  12. Refined shear correction factor for very thick simply supported and uniformly loaded isosceles right triangular auxetic plates

    NASA Astrophysics Data System (ADS)

    Lim, Teik-Cheng

    2016-05-01

    For moderately thick plates, the use of First order Shear Deformation Theory (FSDT) with a constant shear correction factor of 5/6 is sufficient to take into account the plate deflection arising from transverse shear deformation. For very thick plates, the use of Third order Shear Deformation Theory (TSDT) is preferred as it allows the shear strain distribution to be varied through the plate thickness. Therefore no correction factor is required in TSDT, unlike FSDT. Due to the complexity involved in TSDT, this paper obtains a more accurate shear correction factor for use in FSDT of very thick simply supported and uniformly loaded isosceles right triangular plates based on the TSDT. By matching the maximum deflections for this plate according to FSDT and TSDT, a variable shear correction factor is obtained. Results show that the shear correction factor for the simplified TSDT, i.e. 14/17, is least accurate. The commonly adopted shear correction factor of 5/6 in FSDT is valid only for very thin or highly auxetic plates. This paper provides a variable shear correction for FSDT deflection that matches the plate deflection by TSDT. This variable shear correction factor allows designers to justify the use of a commonly adopted shear correction factor of 5/6 even for very thick plates as long as the Poisson’s ratio of the plate material is sufficiently negative.

  13. Thicknesses of mare basalts on the Moon from gravity and topography

    NASA Astrophysics Data System (ADS)

    Gong, Shengxia; Wieczorek, Mark A.; Nimmo, Francis; Kiefer, Walter S.; Head, James W.; Huang, Chengli; Smith, David E.; Zuber, Maria T.

    2016-05-01

    A new method of determining the thickness of mare basalts on the Moon is introduced that is made possible by high-resolution gravity data acquired from NASA's Gravity Recovery and Interior Laboratory (GRAIL) mission. Using a localized multitaper spherical-harmonic analysis, an effective density spectrum is calculated that provides an estimate of the average crustal density as a function of spherical harmonic degree. By comparing the observed effective density spectrum with one generated from a theoretical model, the thickness of mare basalts can be constrained. We assume that the grain density of the basalts is known from remote sensing data and petrologic considerations, we assign a constant porosity to the basalts, and we let both the thickness of the basalts and the density of the underlying crust vary. Using this method, the total thickness of basalts was estimated on the nearside hemisphere, yielding an average of 0.74 km with 1σ upper and lower bounds of 1.62 km and 100 m, respectively. The region of Marius Hills, which is a long-lived volcanic complex, is found to have the thickest basalts, with an average of 2.86 km and 1σ limits of 3.65 and 1.02 km, respectively. The crust beneath the Mare Imbrium basalts is found to have an atypically high density of about 3000 kg m-3 that we interpret as representing a mafic, unfractured, impact melt sheet.

  14. Thickness of the Magnetic Crust of Mars from Magneto-Spectral Analysis

    NASA Technical Reports Server (NTRS)

    Voorhies, Coerte V.

    2006-01-01

    Previous analysis of the magnetic spectrum of Mars showed only a crustal source field. The observational spectrum was fairly well fitted by the spectrum expected from random dipolar sources scattered on a spherical shell about 46 plus or minus 10 km below Mars' 3389.5 km mean radius. This de-correlation depth overestimates the typical depth of extended magnetized structures, and so was judged closer to mean source layer thickness than twice its value. To better estimate the thickness of the magnetic crust of Mars, six different magnetic spectra were fitted with the theoretical spectrum expected from a novel, bimodal distribution of magnetic sources. This theoretical spectrum represents both compact and extended, laterally correlated sources, so source shell depth is doubled to obtain layer thickness. The typical magnetic crustal thickness is put at 47.8 plus or minus 8.2 km. The extended sources are enormous, typically 650 km across, and account for over half the magnetic energy at low degrees. How did such vast regions form?

  15. The Reactivity of Thymine and Thymidine 5,6-Epoxides with Organometallic Reagents - A Route to Thymidine (6-4) Photoproduct Analogues.

    PubMed

    Wrigstedt, Pauli; Kavakka, Jari; Heikkinen, Sami; Nieger, Martin; Räisänen, Minna; Repo, Timo

    2016-05-01

    This report describes an efficient procedure for the generation and isolation of various thymine and thymidine 5,6-epoxides from the corresponding trans-5,6-bromohydrins by reaction with triethylamine. The quantitative isolation of the epoxides, accomplished by solvent precipitation of triethylamine hydrobromide, enabled their regiospecific ring-opening at C6 position by organometallic nucleophiles. The reaction was amenable to a broad range of alkyl, aryl, alkenyl, and alkynyl organomagnesium, -zinc, -aluminum, or -boron reagents, although the reactivity was strongly affected by the electronic effects of N3 protecting group. Additionally, the reaction featured excellent cis-diastereoselectivity providing access to C6-carbon-functionalized dihydrothymidine cis-alcohols, which are synthetic derivatives of UV-induced DNA lesions, namely, thymidine (6-4) photoproducts. PMID:27080560

  16. Design and synthesis of novel 5,6-disubstituted pyridine-2,3-dione-3-thiosemicarbazone derivatives as potential anticancer agents.

    PubMed

    Xie, Wenlin; Xie, Shimin; Zhou, Ying; Tang, Xufu; Liu, Jian; Yang, Wenqian; Qiu, Minghua

    2014-06-23

    A series of 5,6-disubstituted pyridine-2,3-dione-3-thiosemicarbazone derivatives(2a-2n) and 5,6-disubstituted pyridine-2,3-dione S-benzyl-3-thiosemicarbazones(3a-3g) were synthesized starting from 2,3-dihydroxypyridine via oxidation-Michael additions, condensations and nucleophilic substitutions. The structures of the compounds were established by IR, (1)H NMR, (13)C NMR, and HRMS. All newly synthesized compounds were screened for their anticancer activity against Breast cancer (MCF-7), Colon cancer (HCT-116) and hepatocellular cancer (BEL7402) cell lines. Bioassay results indicated that most of the prepared compounds exhibited cytotoxicity against various cancer cells in vitro. Some of the compounds exhibited promising antiproliferative activity, which were comparable to the positive control (5-fluorouracil). The structure-activity relationship was discussed. PMID:24819956

  17. Developing Knowledge Management (KM): Contributions by Organizational Learning and Total Quality Management (TQM)

    ERIC Educational Resources Information Center

    Hung, Richard Yu-Yuan; Lien, Bella Ya-Hui

    2005-01-01

    Knowledge management is an integral business function for many organizations to manage intellectual resources effectively. From a resource-based perspective, organizational learning and TQM are antecedents that are closely related to KM. The purposes of this study were to explain the contents of KM, and explore the relationship between KM-related…

  18. The Cytochrome b5 dependent C-5(6) sterol desaturase DES5A from the endoplasmic reticulum of Tetrahymena thermophila complements ergosterol biosynthesis mutants in Saccharomyces cerevisiae

    PubMed Central

    Poklepovich, Tomas J.; Rinaldi, Mauro A.; Tomazic, Mariela L.; Favale, Nicolas O.; Turkewitz, Aaron P.; Nudel, Clara B.; Nusblat, Alejandro D.

    2012-01-01

    Tetrahymena thermophila is a free-living ciliate with no exogenous sterol requirement. However, it can perform several modifications on externally added sterols including desaturation at C5(6), C7(8), and C22(23). Sterol desaturases in Tetrahymena are microsomal enzymes that require Cyt b5, Cyt b5 reductase, oxygen, and reduced NAD(P)H for their activity, and some of the genes encoding these functions have recently been identified. The DES5A gene encodes a C-5(6) sterol desaturase, as shown by gene knockout in Tetrahymena. To confirm and extend that result, and to develop new approaches to gene characterization in Tetrahymena, we have now, expressed DES5A in Saccharomyces cerevisiae. The DES5A gene was codon optimized and expressed in a yeast mutant, erg3Δ, which is disrupted for the gene encoding the S. cerevisiae C-5(6) sterol desaturase ERG3. The complemented strain was able to accumulate 74% of the wild type level of ergosterol, and also lost the hypersensitivity to cycloheximide associated with the lack of ERG3 function. C-5(6) sterol desaturases are expected to function at the endoplasmic reticulum. Consistent with this, a GFP-tagged copy of Des5Ap was localized to the endoplasmic reticulum in both Tetrahymena and yeast. This work shows for the first time that both function and localization are conserved for a microsomal enzyme between ciliates and fungi, notwithstanding the enormous evolutionary distance between these lineages. The results suggest that heterologous expression of ciliate genes in S. cerevisiae provides a useful tool for the characterization of genes in Tetrahymena, including genes encoding membrane protein complexes. PMID:22982564

  19. Modelling of crystal structure of cis-1,2,3,6 and 3,4,5,6-tetrahydrophthalic anhydrides using lattice energy calculations.

    PubMed

    Fredj, A Ben; Day, G M

    2015-08-01

    Lattice energy calculations using a model potential were performed to model the crystal structures of cis-1,2,3,6- and 3,4,5,6-tetrahydrophthalic (THP) anhydrides. The optimized molecular models using the DFT method at the B3LYP/6-31G** level were found consistent with the available experimental evidence and allowed all differences observed in crystal packing between cis-1,2,3,6- and 3,4,5,6-THP anhydrides to be reproduced. Calculations provide evidence for the presence of dipole-dipole C=O⋯C=O intermolecular interactions and support the idea that the molecules distort from their ideal geometries, improving packing in both crystals. The search for minima in the lattice energy of both crystals amongst the more common space groups with Z' = 1, using a simulated annealing crystal structure prediction procedure followed by lattice energy minimization showed that the observed structure of 3,4,5,6-THP anhydride (Z' = 2) is the thermodynamically most stable, and allowed us to justify why 3,4,5,6-THP anhydride crystallizes in such a complex structure with 16 molecules in the unit cell. The computational model was successful in predicting the second observed form at 173 K for cis-1,2,3,6-THP anhydride as a polymorph, and could predict several hypothetical structures with Z' = 1 that appear competitive with the observed structures. The results of phonon estimates of zero point intermolecular vibrational energy and entropy suggest that crystal structures of cis-1,2,3,6-THP anhydride cannot be predicted solely on the basis of lattice energy; factors other than thermodynamics favor the observed structures. PMID:26224602

  20. Genetic structure of Plasmodium vivax using the merozoite surface protein 1 icb5-6 fragment reveals new hybrid haplotypes in southern Mexico

    PubMed Central

    2014-01-01

    Background Plasmodium vivax is a protozoan parasite with an extensive worldwide distribution, being highly prevalent in Asia as well as in Mesoamerica and South America. In southern Mexico, P. vivax transmission has been endemic and recent studies suggest that these parasites have unique biological and genetic features. The msp1 gene has shown high rate of nucleotide substitutions, deletions, insertions, and its mosaic structure reveals frequent events of recombination, maybe between highly divergent parasite isolates. Methods The nucleotide sequence variation in the polymorphic icb5-6 fragment of the msp1 gene of Mexican and worldwide isolates was analysed. To understand how genotype diversity arises, disperses and persists in Mexico, the genetic structure and genealogical relationships of local isolates were examined. To identify new sequence hybrids and their evolutionary relationships with other P. vivax isolates circulating worldwide two haplotype networks were constructed questioning that two portions of the icb5-6 have different evolutionary history. Results Twelve new msp1 icb5-6 haplotypes of P. vivax from Mexico were identified. These nucleotide sequences show mosaic structure comprising three partially conserved and two variable subfragments and resulted into five different sequence types. The variable subfragment sV1 has undergone recombination events and resulted in hybrid sequences and the haplotype network allocated the Mexican haplotypes to three lineages, corresponding to the Sal I and Belem types, and other more divergent group. In contrast, the network from icb5-6 fragment but not sV1 revealed that the Mexican haplotypes belong to two separate lineages, none of which are closely related to Sal I or Belem sequences. Conclusions These results suggest that the new hybrid haplotypes from southern Mexico were the result of at least three different recombination events. These rearrangements likely resulted from the recombination between haplotypes of

  1. The unique luminal staining pattern of cytokeratin 5/6 in adenoid cystic carcinoma of the breast may aid in differentiating it from its mimickers.

    PubMed

    Nakai, Tokiko; Ichihara, Shu; Kada, Akiko; Ito, Noriko; Moritani, Suzuko; Kawasaki, Tomonori; Uchiyama, Tomoko; Itami, Hiroe; Morita, Kouhei; Takano, Masato; Takeda, Maiko; Hatakeyama, Kinta; Ohbayashi, Chiho

    2016-08-01

    Adenoid cystic carcinoma (AdCC) of the breast is an uncommon but distinct neoplasm composed of a dual cell population polarized around true glandular (luminal) spaces and pseudolumina. The aim of this study was to clarify whether various immunohistochemical markers (CK7, EMA, CD117, p63, calponin, CD10, S100, CK5/6, CK14, vimentin, and type IV collagen) can distinguish between the two cell types in classical AdCC (n = 14) and in collagenous spherulosis (n = 5). The sensitivity and specificity of these 11 markers to distinguish luminal from abluminal cells were evaluated using a curve created by plotting the true-positive rate (sensitivity) against the false-positive rate (1 - specificity) at threshold settings of 0, 10, 50, and 70 %. The most sensitive and specific markers for luminal cells in AdCC were CK7 and EMA; those for abluminal cells were type IV collagen, p63, and vimentin. CD10 and S100 did not act as abluminal markers in AdCC. CK5/6, one of the basal/myoepithelial markers, was expressed more frequently in luminal than in abluminal cells of AdCC. Thus, CK5/6 immunostaining resulted in a reverse expression pattern, analogous to what we recently documented in clear cells in mammary adenomyoepithelioma. In conclusion, compared with myoepithelial/abluminal cells of normal breast or collagenous spherulosis, the neoplastic abluminal cells of classical AdCC are characterized by enhanced vimentin and attenuated CD10 and S100. Furthermore, the luminal cells of AdCC show a unique aberrant staining pattern for CK5/6 that may aid in the differential diagnosis. PMID:27240462

  2. Structural studies on Mannich bases of 2-Hydroxy-3,4,5,6-tetrachlorobenzene. An UV, IR, NMR and DFT study. A mini-review

    NASA Astrophysics Data System (ADS)

    Hansen, Poul Erik; Spanget-Larsen, Jens

    2016-09-01

    Mannich bases of 2-Hydroxy-3,4,5,6-tetrachlorobenzene are chosen as an exemplary case for tautomeric Mannich bases. Molecular structures are calculated. OH stretching frequencies are rationalized based on DFT calculations. Intrinsic deuterium isotope effects on 13C chemical shifts in the M-form are estimated based on OH bond lengths. The observed deuterium isotope effects on 13C chemical shifts are demonstrated to be largely of equilibrium type except at ambient temperatures.

  3. Deformation of an elastic shell with variable thickness: a comparison of different methods

    NASA Astrophysics Data System (ADS)

    Kalousová, K.; Souček, O.; Čadek, O.

    2012-08-01

    Deformation of the outermost parts of single-plate planetary bodies is often modelled in terms of the response of a spherical elastic shell to surface or basal loading. As the thickness of such elastic lithosphere is usually much smaller than the radius of the body, the deformation is commonly approximated by that obtained for a thin elastic shell of uniform thickness. The main advantage of the thin shell approximation is its simplicity—the solution can be expressed analytically if the thickness of the shell is uniform, but even in the case of a thin shell of variable thickness, when the problem must be solved numerically, the computational costs are much lower than in a fully 3-D case. Here we analyse the error of the thin shell approximation by comparing it with the solution obtained for a shell of finite thickness using finite element methods. Special attention is paid to a shell of variable thickness and, in general, to the effect of elastic thickness variations on local deformation. For a shell of uniform thickness with the outer radius corresponding to Mars, we find that the error in radial displacement at low harmonic degrees (ℓ≤ 20) does not exceed 5 per cent for small shell thicknesses (d≤ 50 km) and 10 per cent for thick shells (d˜ 250 km). Similar accuracy is also found for a shell of variable thickness if the thin shell approximation is used. Our numerical tests indicate that local deformation of a shell is mostly sensitive to the average thickness of the shell in the near zone while the effect of thickness variations in the far zone can be neglected in the first approximation. Consequently, the extremely simple thin shell method, designed for shells of uniform thickness, can be effectively used to obtain a reasonably accurate estimate of deflection even in the case of a shell with varying thickness. Finally, we investigate the deformation of an elastic lithosphere due to viscous flow beneath the shell, and we propose an extension of the

  4. Mesd Is a Universal Inhibitor of Wnt Co-receptor LRP5/6 and Blocks Wnt/β-catenin Signaling in Cancer Cells†

    PubMed Central

    Lu, Wenyan; Liu, Chia-Chen; Thottassery, Jaideep V.; Bu, Guojun; Li, Yonghe

    2010-01-01

    Mesd is a specialized chaperone for the low-density lipoprotein receptor-related protein-5 (LRP5) and LRP6. In our previous studies, we found that Mesd binds to mature LRP6 on the cell surface and blocks the binding of Wnt antagonist Dickkopf-1(Dkk1) to LRP6. Herein, we demonstrated that Mesd also binds to LRP5 with a high affinity, and is a universal inhibitor of LRP5/6 ligands. Mesd not only blocks Wnt antagonists Dkk1 and Sclerostin binding to LRP5/6, but also inhibits Wnt3A and Rspondin1-induced Wnt/β-catenin signaling in LRP5/6 expressing cells. We also found that Mesd, Dkk1 and Sclerostin compete with one another for binding to LRP5 and LRP6 at the cell surface. More importantly, we demonstrated that Mesd is able to suppress LRP6 phosphorylation and Wnt/β-catenin signaling in prostate cancer PC-3 cells, and inhibits PC-3 cell proliferation. Our results indicate that recombinant Mesd protein is a useful tool for studying Wnt/β-catenin signaling on the cell surface, and has a potential therapeutic role in Wnt-dependent cancers. PMID:20446724

  5. [(Pb6I8){Mn(CO)5}6](2-): an octahedral (M6X8)-like cluster with inverted bonding.

    PubMed

    Wolf, Silke; Reiter, Kevin; Weigend, Florian; Klopper, Wim; Feldmann, Claus

    2015-04-20

    [BMIm]2[{PbMn(CO)5)}6I8] (BMIm: 1-butyl-3-methylimidazolium) is obtained by ionic liquid mediated reaction of PbI2 and Mn2(CO)10. Central is a cubelike (Pb6I8) unit containing a nonfilled Pb6 octahedron. Each Pb of this (Pb6I8) unit is terminated on its outside by Mn(CO)5, exhibiting Pb-Mn metal-to-metal bonding (280 pm). Structurally, the (Pb6I8) unit is similar to the well-known octahedral (M6Xn) cluster-type family (M = Zr, Nb, Ta, Mo, W; X = Cl, Br, I). In contrast to most similar cluster compounds, such as W6Br12 ([W6Br8]Br2/1Br4/2, according to Niggli notation) or the carbonyl cluster [Sn6{Cr(CO5)6}](2-), however, the nonfilled central Pb6 octahedron in [{PbMn(CO)5)}6I8](2-) does not exhibit any metal-to-metal bonding. Structure and bonding of the title compound are validated by single-crystal structure analysis, energy-dispersive X-ray analysis (EDX), infrared spectroscopy (FT-IR), and density functional theory (DFT) calculations. Based on the isolobal principle, electronegativity considerations, bond lengths, and DFT calculations including Mulliken population analysis and natural population analysis (NPA), in sum, the charge distribution of Pb is best reflected by an oxidation state of +1. PMID:25830920

  6. 4′-CyanoPLP presents better prospect for the experimental detection of elusive cyclic intermediate radical in the reaction of lysine 5,6-aminomutase

    SciTech Connect

    Maity, Amarendra Nath; Ke, Shyue-Chu

    2015-02-06

    Graphical abstract: The results of our calculations suggest that the reaction of 4′-cyanoPLP with lysine 5,6-aminomutase offers better prospect for the experimental detection of elusive cyclic azacyclopropylcarbinyl radical, which is proposed to be a key intermediate in the reaction of pyridoxal-5′-phosphate dependent radical aminomutases. - Highlights: • 4′-CyanoI{sup ·} is the lowest energy radical intermediate in the reaction of 5,6-LAM. • 4′-CyanoPLP offers good prospect for the experimental observation of elusive I{sup ·}. • The calculated HFCCs would help to characterize 4′-cyanoI{sup ·} by EPR. - Abstract: The results of our calculations suggest that the reaction of 4′-cyanoPLP with lysine 5,6-aminomutase offers better prospect for the experimental detection of elusive cyclic azacyclopropylcarbinyl radical (I{sup ·}), which is proposed to be a key intermediate in the reaction of pyridoxal-5′-phosphate dependent radical aminomutases. We have calculated the corresponding hyperfine coupling constants (HFCCs) for {sup 14}N and {sup 13}C of cyano group using several basis sets to help the characterization of 4′-cyanoI{sup ·}.

  7. Time-temperature-burial significance of Devonian anthracite implies former great (approx. 6. 5 km) depth of burial of Catskill Mountains, New York

    SciTech Connect

    Friedman, G.M.; Sanders, J.E.

    1982-02-01

    Specimens of coalified plant debris in Tully-correlative strata of the Gilboa Formation (uppermost Middle Devonian) within the eastern Catskill Mountains of New York State have been converted to anthracite having a vitrinite reflectance of 2.5%. This implies a level of organic metamorphism (LOM) of 16. The specimens are about 350 m.y. old; if 200 m.y. is taken as the duration of the time of exposure to the maximum geothermal temperature, then the LOM of 16 and other thermal indicators imply a maximum temperature of 190/sup 0/C. Using a geothermal gradient of 26/sup 0/C.km/sup -1/ (17/sup 0/F.1,000 ft/sup -1/), a former depth of burial of 6.5 km is implied. Such former deep burial is not usually inferred for the Catskills, but it is consistent with the idea that the thick (about 6.4 km or 21,000 ft) Carboniferous strata of northeastern Pennsylvania formerly extended northeast far enough to bury the Catskills. The lack of metamorphism of the Paleozoic strata lying about 4.5 km beneath the Tully-correlative rocks and exposed in the adjacent Hudson Valley places low limits on the former geothermal gradient; this supports the concept of great depth of former burial of the Catskills. For example, 6.5 km of former burial and a geothermal gradient of 26/sup 0/C.km/sup -1/ imply a temperature of 307/sup 0/C for the base of the Paleozoic. By contrast, only 1 km of former burial requires a geothermal gradient of 170/sup 0/C.km/sup -1/, which would have subjected the base of the Paleozoic to a temperature of 955/sup 0/GAMMA, which is far higher than the 600 to 650/sup 0/C recently inferred for the Acadian-age metamorphism of the Taconic allochthon in southwestern Massachusetts and adjoining areas.

  8. Three-dimensional estimate of the lithospheric effective elastic thickness of the Line ridge

    NASA Astrophysics Data System (ADS)

    Hu, Minzhang; Li, Jiancheng; Jin, Taoyong; Xu, Xinyu; Xing, Lelin; Shen, Chongyang; Li, Hui

    2015-09-01

    Using a new bathymetry grid formed with vertical gravity gradient anomalies and ship soundings (BAT_VGG), a 1° × 1° lithospheric effective elastic thickness (Te) grid of the Line ridge was calculated with the moving window admittance technique. As a comparison, both the GEBCO_08 and SIO V15.1 bathymetry datasets were used to calculate Te as well. The results show that BAT_VGG is suitable for the calculation of lithospheric effective elastic thickness. The lithospheric effective elastic thickness of the Line ridge is shown to be low, in the range of 5.5-13 km, with an average of 8 km and a standard deviation of 1.3 km. Using the plate cooling model as a reference, most of the effective elastic thicknesses are controlled by the 150-300 °C isotherm. Seamounts are primarily present in two zones, with lithospheric ages of 20-35 Ma and 40-60 Ma, at the time of loading. Unlike the Hawaiian-Emperor chain, the lithospheric effective elastic thickness of the Line ridge does not change monotonously. The tectonic setting of the Line ridge is discussed in detail based on our Te results and the seamount ages collected from the literature. The results show that thermal and fracture activities must have played an important role in the origin and evolution of the ridge.

  9. Optically thick outflows in ultraluminous supersoft sources

    NASA Astrophysics Data System (ADS)

    Urquhart, R.; Soria, R.

    2016-02-01

    Ultraluminous supersoft sources (ULSs) are defined by a thermal spectrum with colour temperatures ˜0.1 keV, bolometric luminosities ˜ a few 1039 erg s-1, and almost no emission above 1 keV. It has never been clear how they fit into the general scheme of accreting compact objects. To address this problem, we studied a sample of seven ULSs with extensive Chandra and XMM-Newton coverage. We find an anticorrelation between fitted temperatures and radii of the thermal emitter, and no correlation between bolometric luminosity and radius or temperature. We compare the physical parameters of ULSs with those of classical supersoft sources, thought to be surface-nuclear-burning white dwarfs, and of ultraluminous X-ray sources (ULXs), thought to be super-Eddington stellar-mass black holes. We argue that ULSs are the sub-class of ULXs seen through the densest wind, perhaps an extension of the soft-ultraluminous regime. We suggest that in ULSs, the massive disc outflow becomes effectively optically thick and forms a large photosphere, shrouding the inner regions from our view. Our model predicts that when the photosphere expands to ≳ 105 km and the temperature decreases below ≈50 eV, ULSs become brighter in the far-UV but undetectable in X-rays. Conversely, we find that harder emission components begin to appear in ULSs when the fitted size of the thermal emitter is smallest (interpreted as a shrinking of the photosphere). The observed short-term variability and absorption edges are also consistent with clumpy outflows. We suggest that the transition between ULXs (with a harder tail) and ULSs (with only a soft thermal component) occurs at blackbody temperatures of ≈150 eV.

  10. Oscillatory Chloride Efflux at the Pollen Tube Apex Has a Role in Growth and Cell Volume Regulation and Is Targeted by Inositol 3,4,5,6-Tetrakisphosphate

    PubMed Central

    Zonia, Laura; Cordeiro, Sofia; Tupý, Jaroslav; Feijó, José A.

    2002-01-01

    Oscillatory growth of pollen tubes has been correlated with oscillatory influxes of the cations Ca2+, H+, and K+. Using an ion-specific vibrating probe, a new circuit was identified that involves oscillatory efflux of the anion Cl− at the apex and steady influx along the tube starting at 12 μm distal to the tip. This spatial coupling of influx and efflux sites predicts that a vectorial flux of Cl− ion traverses the apical region. The Cl− channel blockers 4,4′-diisothiocyanatostilbene-2,2′-disulfonic acid (DIDS) and 5-nitro-2-(3-phenylpropylamino)benzoic acid completely inhibited tobacco pollen tube growth at 80 and 20 μM, respectively. Cl− channel blockers also induced increases in apical cell volume. The apical 50 μm of untreated pollen tubes had a mean cell volume of 3905 ± 75 μm3. DIDS at 80 μM caused a rapid and lethal cell volume increase to 6206 ± 171 μm3, which is at the point of cell bursting at the apex. DIDS was further demonstrated to disrupt Cl− efflux from the apex, indicating that Cl− flux correlates with pollen tube growth and cell volume status. The signal encoded by inositol 3,4,5,6-tetrakisphosphate [Ins(3,4,5,6)P4] antagonized pollen tube growth, induced cell volume increases, and disrupted Cl− efflux. Ins(3,4,5,6)P4 decreased the mean growth rate by 85%, increased the cell volume to 5997 ± 148 μm3, and disrupted normal Cl− efflux oscillations. These effects were specific for Ins(3,4,5,6)P4 and were not mimicked by either Ins(1,3,4,5)P4 or Ins(1,3,4,5,6)P5. Growth correlation analysis demonstrated that cycles of Cl− efflux were coupled to and temporally in phase with cycles of growth. A role for Cl− flux in the dynamic cellular events during growth is assessed. Differential interference contrast microscopy and kymographic analysis of individual growth cycles revealed that vesicles can advance transiently to within 2 to 4 μm of the apex during the phase of maximally increasing Cl− efflux, which temporally

  11. New approach to immunochemical determinations for triclopyr and 3,5,6-trichloro-2-pyridinol by using a bifunctional hapten, and evaluation of polyclonal antiserum.

    PubMed

    Watanabe, Eiki; Hoshino, Ryoko; Kanzaki, Yukiko; Tokumoto, Hiroshi; Kubo, Hiroaki; Nakazawa, Hiroyuki

    2002-06-19

    The present work describes the design and synthesis of the structurally unique hapten, "bifunctional hapten", to produce a group-specific polyclonal antiserum to triclopyr and 3,5,6-trichloro-2-pyridinol. A bifunctional hapten was designed and synthesized by conjugating commercially available Nepsilon-2,4-dinitrophenyl (DNP)-L-lysine to triclopyr, and then coupling this to carrier proteins such as bovine serum albumin (BSA). The synthesized bifunctional hapten greatly raised the antiserum titer in comparison with that of the conventional hapten, triclopyr. Antiserum with a sufficiently high titer to provide the determinations of targeted compounds was obtained only 63 days after the primary immunization. The obtained antiserum showed the highest affinity to triclopyr (IC(50) = 3.5 nM) and 3,5,6-trichloro-2-pyridinol (IC(50) = 5.1 nM) in homologous ELISA. The cross-reactivities to various agrochemicals and some chlorinated phenolic compounds were determined. Significant cross-reactivity was found to the herbicide 2,4,5-T. The antiserum reacted to both triclopyr and its metabolite. Assay sensitivity was evaluated for effects of various assay conditions, including pH value and concentrations of organic solvents and detergents. Under optimized assay conditions, the quantitative working range of triclopyr ELISA was from 0.1 to 5.2 ng/mL with a limit of detection (LOD) of 0.037 ng/mL, and an IC(50) of 0.72 ng/mL. On the other hand, the quantitative working range of 3,5,6-trichloro-2-pyridinol ELISA was from 0.13 to 6.0 ng/mL with a LOD of 0.052 ng/mL, and an IC(50) of 0.95 ng/mL. Water samples fortified with triclopyr or its metabolite at 1, 5, and 10 ng/mL were directly analyzed without extraction and cleanup by the proposed ELISA. The mean recovery was 101.6%, and the mean coefficient of variation (CV) was 7.1% in the case of the triclopyr ELISA. In the case of the 3,5,6-trichloro-2-pyridinol ELISA, the mean recovery was 99.8%, and the mean CV was 9.5%. The proposed

  12. Cloud Thickness from Offbeam Returns (THOR) Validation Campaign on NASA's P3B Over the ARM/SGP

    NASA Technical Reports Server (NTRS)

    Cahalan, R. F.; Kolasinski, J.; McGill, M.; Lau, William K. M. (Technical Monitor)

    2002-01-01

    Physical thickness of a cloud layer, sometimes multiple cloud layers, is a crucial controller of solar heating of the Earth- atmosphere system, which drives the convective processes that produce storm systems. Yet clouds of average optical thickness are opaque to conventional lidar, so their thickness is well estimated only by combining a lidar above and another below cloud, or a radar and lidar on the same side, dual facilities not widely available. Here we report initial observations of a new airborne multiple field of view lidar, capable of determining physical thickness of cloud layers from time signatures of off-beam returns from a I kHz micropulse lidar at 540 rim. For a single layer, the time delay of light returning from the outer diffuse halo of light surrounding the beam entry point, relative to the time delay at beam center, determines the cloud physical thickness. The delay combined with the pulse stretch gives the optical thickness. This halo method requires cloud optical thickness exceeding 2, and improves with cloud thickness, thus complimenting conventional lidar, which cannot penetrate thick clouds. Results are presented from March 25, 2002, when THOR flew a butterfly pattern over the ARM site at 8.3 km, above a thin ice cloud at 5 km, and a thick boundary-layer stratus deck with top at 1.3 km, as shown by THOR channel 1, and a base at about 0.3 km as shown by the ground-based MPL. Additional information is included in the original extended abstract.

  13. Hyperveolcity impacts on aluminum from 6 to 11 km/s for hydrocode benchmarking.

    SciTech Connect

    Saul, W. Venner; Reinhart, William Dodd; Thornhill, Tom Finley, III; Lawrence, Raymond Jeffery Jr.; Chhabildas, Lalit Chandra; Bessette, Gregory Carl; Kipp, Marlin E.

    2003-04-01

    A systematic computational and experimental study is presented on impact generated debris resulting from record-high impact speeds recently achieved on the Sandia three-stage light-gas gun. In these experiments, a target plate of aluminum is impacted by a titanium-alloy flyer plate at speeds ranging from 6.5 to 11 km/s, producing pressures from 1 Mb to over 2.3 Mb, and temperatures as high as 15000 K (>1 eV). The aluminum plate is totally melted at stresses above 1.6 Mb. Upon release, the thermodynamic release isentropes will interact with the vapor dome. The amount of vapor generated in the debris cloud will depend on many factors such as the thickness of the aluminum plate, super-cooling, vaporization kinetics, the distance, and therefore time, over which the impact-generated debris is allowed to expand. To characterize the debris cloud, the velocity history produced by stagnation of the aluminum expansion products against a witness plate is measured using velocity interferometry. X-ray measurements of the debris cloud are also recorded prior to stagnation against an aluminum witness plate. Both radiographs and witness-plate velocity measurements suggest that the vaporization process is both time-dependent and heterogeneous when the material is released from shocked states around 230 GPa. Experiments suggest that the threshold for vaporization kinetics in aluminum should become significant when expanded from shocked states over 230 GPa. Numerical simulations are conducted to compare the measured x-ray radiographs of the debris cloud and the time-resolved experimental interferometer record with calculational results using the 3-D hydrodynamic wavecode, CTH. Results of these experiments and calculations are discussed in this paper.

  14. Underwater acoustic positioning system for the SMO and KM3NeT - Italia projects

    SciTech Connect

    Viola, S.; Barbagallo, G.; Cacopardo, G.; Calí, C.; Cocimano, R.; Coniglione, R.; Costa, M.; Cuttone, G.; D'Amato, C.; D'Amato, V.; D'Amico, A.; De Luca, V.; Del Tevere, F.; Distefano, C.; Ferrera, F.; Gmerk, A.; Grasso, R.; Imbesi, M.; Larosa, G.; Lattuada, D.; and others

    2014-11-18

    In the underwater neutrino telescopes, the positions of the Cherenkov light sensors and their movements must be known with an accuracy of few tens of centimetres. In this work, the activities of the SMO and KM3NeT-Italia teams for the development of an acoustic positioning system for KM3NeT-Italia project are presented. The KM3NeT-Italia project foresees the construction, within two years, of 8 towers in the view of the several km{sup 3}-scale neutrino telescope KM3NeT.

  15. Furrow Topography and the Elastic Thickness of Ganymede's Dark Terrain Lithosphere

    NASA Technical Reports Server (NTRS)

    Pappalardo, Robert T.; Nimmo, Francis; Giese, Bernd; Bader, Christina E.; DeRemer, Lindsay C.; Prockter, Louise M.

    2003-01-01

    The effective elastic thickness of Ganymede's lithosphere tell of the satellite's thermal evolution through time. Generally it has been inferred that dark terrain, which is less tectonically deformed than grooved terrain, represents regions of cooler and thicker lithosphere [1]. The ancient dark terrain is cut by furrows, tectonic troughs about 5 to 20 km in width, which may have formed in response to large ancient impacts [1, 2]. We have applied the methods of [3] to estimate effective elastic thickness based on topographic profiles across tectonic furrows, extracted from a stereo-derived digital elevation model (DEM) of dark terrain in Galileo Regio [4]. Asymmetry in furrow topography and inferred flexure suggests asymmetric furrow fault geometry. We find effective elastic thicknesses 0.4 km, similar to analyzed areas alongside bright grooved terrain. Data and Analysis: A broken-plate elastic model.

  16. Large floor-fractured craters and isostatic crater modification: Implications for lithospheric thickness on Venus

    NASA Astrophysics Data System (ADS)

    Wichman, R. W.; Schultz, P. H.

    1993-03-01

    Several of the largest craters on Venus, including Mead, Meitner and Isabella, exhibit well-developed floor fracture patterns combining a central set of radial features with a peripheral set of concentric fractures. This pattern strongly resembles the fracture patterns observed in the largest floor-fractured craters on the Moon (e.g. Humboldt, Gauss, Petavius). Although most lunar floor-fractured craters apparently reflect crater modification by igneous intrusions and volcanism, we propose that the fractures in these larger craters represent domical flexure events in response to post-impact isostatic uplift. Since the extent of uplift and surface failure in this model depends on both the size of the basin cavity and the local lithospheric thickness, this interpretation also provides a means for constraining lithospheric thicknesses on Venus. Based on the apparent onset diameter of isostatic crater modification, we derive lithospheric thickness estimates for the Moon of approximately 80 - 100 km, and for Venus of approximately 50 - 70 km.

  17. Effect of Ice-Shell Thickness Variations on the Tidal Deformation of Enceladus

    NASA Astrophysics Data System (ADS)

    Choblet, G.; Cadek, O.; Behounkova, M.; Tobie, G.; Kozubek, T.

    2015-12-01

    Recent analysis of Enceladus's gravity and topography has suggested that the thickness of the ice shell significantly varies laterally - from 30-40 km in the south polar region to 60 km elsewhere. These variations may influence the activity of the geysers and increase the tidal heat production in regions where the ice shell is thinned. Using a model including a regional or global subsurface ocean and Maxwell viscoelasticity, we investigate the impact of these variations on the tidal deformation of the moon and its heat production. For that purpose, we use different numerical approaches - finite elements, local application of 1d spectral method, and a generalized spectral method. Results obtained with these three approaches for various models of ice-shell thickness variations are presented and compared. Implications of a reduced ice shell thickness for the south polar terrain activity are discussed.

  18. Large floor-fractured craters and isostatic crater modification: Implications for lithospheric thickness on Venus

    NASA Technical Reports Server (NTRS)

    Wichman, R. W.; Schultz, P. H.

    1993-01-01

    Several of the largest craters on Venus, including Mead, Meitner and Isabella, exhibit well-developed floor fracture patterns combining a central set of radial features with a peripheral set of concentric fractures. This pattern strongly resembles the fracture patterns observed in the largest floor-fractured craters on the Moon (e.g. Humboldt, Gauss, Petavius). Although most lunar floor-fractured craters apparently reflect crater modification by igneous intrusions and volcanism, we propose that the fractures in these larger craters represent domical flexure events in response to post-impact isostatic uplift. Since the extent of uplift and surface failure in this model depends on both the size of the basin cavity and the local lithospheric thickness, this interpretation also provides a means for constraining lithospheric thicknesses on Venus. Based on the apparent onset diameter of isostatic crater modification, we derive lithospheric thickness estimates for the Moon of approximately 80 - 100 km, and for Venus of approximately 50 - 70 km.

  19. Kinematical and Chemical Vertical Structure of the Galactic Thick Disk. I. Thick Disk Kinematics

    NASA Astrophysics Data System (ADS)

    Moni Bidin, C.; Carraro, G.; Méndez, R. A.

    2012-03-01

    The variation of the kinematical properties of the Galactic thick disk with Galactic height Z is studied by means of 412 red giants observed in the direction of the south Galactic pole up to 4.5 kpc from the plane. We confirm the non-null mean radial motion toward the Galactic anticenter found by other authors, but we find that it changes sign at |Z| = 3 kpc, and the proposed inward motion of the local standard of rest alone cannot explain these observations. The rotational velocity decreases with |Z| by -30 km s-1 kpc-1, but the data are better represented by a power law with index 1.25, similar to that proposed from the analysis of Sloan Digital Sky Survey data. All the velocity dispersions increase with |Z|, but the vertical gradients are small. The dispersions grow proportionally, with no significant variation of the anisotropy. The ratio σU/σW = 2 suggests that the thick disk could have formed from a low-latitude merging event. The vertex deviation increases with Galactic height, reaching ~20° at |Z| = 3.5 kpc. The tilt angle also increases, and the orientation of the ellipsoid in the radial-vertical plane is constantly intermediate between the alignment with the cylindrical and the spherical coordinate systems. The tilt angle at |Z| = 2 kpc coincides with the expectations of MOdified Newtonian Dynamics, but an extension of the calculations to higher |Z| is required to perform a conclusive test. Finally, between 2.5 and 3.5 kpc we detect deviations from the linear trend of many kinematical quantities, suggesting that some kinematical substructure could be present. Based on observations collected at the European Organization for Astronomical Research in the Southern Hemisphere, Chile (proposal IDs 075.B-0459(A), 077.B-0348(A)). This paper includes data gathered with the 6.5 m Magellan and the duPont Telescopes, located at Las Campanas Observatory, Chile.

  20. On Level Ice Thickness Retrieval in the Kara Sea Using MODIS and Envisat ASAR Data

    NASA Astrophysics Data System (ADS)

    Makynen, Marko; Simila, Markku; Cheng, Bin

    2010-12-01

    We propose here an approach to use jointly ENVISAT SAR and MODIS data and high-resolution thermodynamic snow/ice model (HIGHTSI) to estimate the thickness of first-year sea ice in cold winter conditions. For thin ice areas the sea ice thickness is retrieved from the MODIS based ice surface temperature (Ts) and HIRLAM forcing data. When estimating the ice thickness in the older and thicker drift ice areas, ice thickness field produced by HIGHTSI is used as a background field which constraints backscattering coefficient based ice thickness range. Our test data set consists of four MODIS-SAR image pairs taken over the Kara Sea in Dec 2008 - Mar 2009. The MODIS based ice thickness retrievals were consistent with each other. We estimated their uncertainty to be less than 25% for young ice. However, the HIRLAM modelled air temperature seems to be somewhat lower than could be inferred from Ts. This bias affected the MODIS ice thickness retrieval process by decreasing the retrieved ice thickness significantly for thicker ice fields. On a scale 10-100 km the spatial distribution of the ice thickness provided by our algorithm follows roughly the AARI ice charts which were used as a ground truth.

  1. Teaching Music, Grades 5, 6.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

    This curriculum guide has been prepared for use by both the music specialist and the classroom teacher in New York City. It outlines areas of musical subject matter appropriate for students in grades five and six. The materials are presented in six sections. "Rhythmic Experiences" introduces students to a variety of meters and rhythms through…

  2. Structural uplift and ejecta thickness of lunar mare craters: New insights into the formation of complex crater rims

    NASA Astrophysics Data System (ADS)

    Krüger, Tim; Kenkmann, Thomas

    2015-04-01

    Most complex impact craters on solid planetary surfaces throughout the Solar System exhibit elevated crater rims similar to the elevated crater rims of simple craters. In principal the final elevation of the crater rim is due to the deposition of ejecta on the structurally uplifted bedrock of the pre-impact surface. For simple craters the elevated crater rim is due to two well understood factors: (i) Emplacement of the coherent proximal ejecta material at the transient cavity rim (overturned flap) [1]. (ii) Structural uplift of the pre-impact surface in the proximity of the transient cavity [1, 2]. The amount of structural uplift at the rim of simple craters is due to plastic thickening of the target rock, the emplacement of interthrust wedges and/or the injection of dike material in the underlying target [1, 2, 3, 4]. Both factors, (i) and (ii), are believed to equally contribute to the structural uplift of simple craters. Larger craters have complex morphologies and the crater's extent may considerably exceed that of the transient cavity due to gravity-driven adjustment movements. For instance, the Ries crater's final diameter is twice of its transient cavity size. It is expected that both ejecta thickness and structural uplift decrease with increasing distance from the rim of the transient crater. For lunar craters the continuous ejecta extends up to 2 crater radii from the crater center. The ejecta blanket thickness ET at the rim crest of the transient crater (which is inside the final crater) is a function of the distance r from the crater center, with RT as the radius of the transient crater [2, 6, 7] and is expressed by the following function: (1) ET = 0.033 RT (r/RT)^-3.0 for r ≥ RT [5, 6] The structural uplift is largest at the transient cavity rim and gets rapidly smaller with increasing distance to the crater center and disappears after 1.3 - 1.7 crater radii [1]. These circumstances raise the question, how elevated rims of complex craters form? Based

  3. Imaging Transition Zone Thickness Beneath South America from SS Precursors

    NASA Astrophysics Data System (ADS)

    Schmerr, N.; Garnero, E.

    2006-12-01

    We image detailed upper mantle discontinuity structure beneath a number of geologically active regions, including the South American subduction zone, the Scotia plate subduction zone, and several volcanic hotspots (e.g., the Galapagos Islands), in a region ~10,000 km by 10,000 km wide, spanning 70° S to 20° N and 20° W to 110° W. Precursors to the seismic phase SS are analyzed, which form as a result of underside reflections off seismic discontinuities beneath the midpoint of the SS path and are highly sensitive to discontinuity depth and sharpness. Our SS dataset consists of over 15,000 high-quality transverse component broadband displacement seismograms collected from the Incorporated Research Institutions for Seismology (IRIS), the Canadian National Seismic Network (CNSN), as well as data from EarthScope seismic stations, and from the Canadian Northwest Experiment (CANOE) temporary broadband array deployment. This dataset densely samples several regions in our study area and significantly improves the sampling for this area compared to previous precursor studies. Data with common central SS bouncepoints are stacked to enhance precursory phases. Solution discontinuity structure depends on a number of factors, including dominant seismic period, crustal correction, signal-to-noise ratio threshold, and tomography model used for mantle heterogeneity correction. We exclude precursor data predicted to interfere with other seismic phases, such as topside reflections (e.g., s670sS), which have been demonstrated to contaminate final stacks. Solution transition zone thickness is at least 20 km thicker than global average estimates of 242 km along the northwestern portion of the South American subduction complex (Peru, Ecuador, and Columbia); this thickening extends 1000-1500 km to the east beneath the continent, but does not appear to continue south of -20° latitude along the convergent margin. A minimum of 10 km of thickening is imaged to the west of the Scotia

  4. A Unified Sea Ice Thickness Data Set for Model Validation

    NASA Astrophysics Data System (ADS)

    Lindsay, R.; Wensnahan, M.

    2007-12-01

    Can we, as a community, do better at using existing ice thickness measurements to more effectively evaluate the changing nature of the Arctic ice pack and to better evaluate the performance of our models? We think we can if we work together. We are trying to create a unified ice thickness data set by combining observations from various ice thickness measurement systems. It is designed to facilitate the intercomparison of different measurements, the evaluation of the state of the ice pack, and the validation of sea ice models. Datasets that might be included are ice draft estimates from various submarine and moored upward looking sonar instruments, ice thickness estimates from airborne electromagnetic instruments, and satellite altimeter freeboard measurements. Three principles for the proposed data set are: 1) Full documentation of data sources and characteristics, 2) Spatial and temporal averaging to approximately common scales, and 3) Common data formats. We would not mix data types and we would not interpolate to locations or times not represented in the observations. The target spatial and temporal scale for the measurements would be 50 lineal km of ice and/or one month. Point measurements are not so useful in this context. Data from both hemispheres and any body of ocean water would be included. Documentation would include locations, times, measurement methods, processing, snow depth assumptions, averaging distance and time, error characteristics, data provider, and more. The cooperation and collaboration of the various data providers is essential to the success of this project and so far we have had a very gratifying response to our overtures. We would like to hear from any who have not heard from us and who have collected sea ice thickness data at the approximate target scales. With potentially thousands of individual samples, much could be learned about the measurement systems, about the changing state of the ice cover, and about ice model performance and

  5. Effect of Varying Crustal Thickness on CHAMP Geopotential Data

    NASA Technical Reports Server (NTRS)

    Taylor, Patrick T.; Kis, Karoly I.; vonFrese, Ralph R. B.; Korhonen, Juha V.; Wittmann, Geza; Kim, Hyung Rae; Potts, Larmie V.

    2003-01-01

    Tn determine the effect of crustal thickness variation on satellite-altitude geopotential anomalies we compared two regions of Europe with vastly different values, South and Central Finland and the Pannonian Basin. In our study regions, crustal thickness exceeds 44 km in Finland and is less than 26 km in the Pannonian Basin. Heat-flow data indicate that the thinner and more active crust of the Pannonian Basin has a value nearly three times that of the Finnish Svecofennian Province. An ovoid positive CHAMP gravity anomaly (-4 mGal) is quasi-coincidental with the CHAMP magnetic anomaly traverses the Pannonian Basin while ground based gravity mapping in Hungary shows that the free-air gravity anomalies across the Pannonian Basin are near 0 to +20 mGal with shorter wavelength anomalies from +40 to less than +60 mGal and some 0 to greater than -20 mGal. Larger anomalies are detected in the mountainous areas. The minor value anomalies can indicate the isostatic equilibrium for Hungary (the central part of the Pannonian Basin). Gravity data over Finland bear overprint of de-glaciation. CHAMP gravity data indicates a west-east positive gradient of less than 4 mGal across South and Central Finland. CHAMP magnetic data (400 km) reveal elongated semi-circular negative anomalies for both regions with South-Central Finland having larger amplitude (less than -6 nT) than that over the Pannonian Basin, Hungary (less than -5 nT). In the latter subducted oceanic lithosphere has been proposed as the anomalous body.

  6. Composition and thickness of the southern Altiplano crust, Bolivia

    SciTech Connect

    Zandt, G.; Velasco, A.A. ); Beck, S.L. )

    1994-11-01

    Slant stacking of broadband seismograms recorded in the western United States for two 1993 intermediate-depth earthquakes that occurred near the Bolvia-Argentina-Chile borders reveals small but clear precursors to both the compressional (P) wave and shear (S) wave depth phases. We interpret and model these precursors as underside reflections from the thickened Andean Altiplano crust. We model the crustal structure of the Altiplano with a grid-search technique to match the timing and amplitudes of the depth phases and precursors in the waveforms of both the P wave and S wave. Our best-fit model has an average crust velocity of 5.9-6.0 km/s, a crustal V[sub p]/V[sub s] of 1.6, a crustal thickness of 75-80 km, and a high-velocity (V[sub p] = 8.4 km/s), high-V[sub p]/V[sub s] (1.9) mantle wedge. Assuming isotropy, the low V[sub p]/V[sub s] ratio of 1.6 for the crust corresponds to an anomalously low Poisson's ratio of 0.18. Such a low value, in conjunction with the low average V[sub p] estimate, is consistent only with a felsic composition and high upper-crustal temperatures. The finding of a thick felsic crust overlying a high-velocity mantle supports models of Altiplano uplift due predominantly to crustal shortening as opposed to mafic magmatic addition and is inconsistent with recent mantle delamination. 19 refs., 3 figs., 1 tab.

  7. Deformation quantification in steel plates following impact at a velocity of 2.6 km/s

    NASA Astrophysics Data System (ADS)

    Hogan, J. D.; Rogers, R. J.; Spray, J. G.

    2014-05-01

    Micro-scale damage processes during hypervelocity impact into steel targets have been evaluated using image analysis and electron backscatter diffraction techniques. The targets were 50 mm thick and the impact velocity was 2.6 km/s. Image analysis of the pearlite grains shows localized pockets of strain upwards of 55% occurring at depths associated with penetrator geometry. Electron back scatter diffraction (EBSD) shows that inter-granular ferrite grain orientations become less uniform, with deformation being primarily two- and three-dimensional. Mobilized micro-ferrite textures aligned in the shot direction were also identified with EBSD. These are formed as a result of significant plastic deformation and frictional shearing of the small volume of material.

  8. Amputee Socks: Thickness of Multiple Socks

    PubMed Central

    Cagle, John C; Yu, Alan J; Ciol, Marcia A; Sanders, JE

    2015-01-01

    Background and Aim It is unclear how total sock ply and thickness are related when more than one sock is worn. The objectives were to determine if the thickness of one multi-ply amputee sock of ply P was the same as the thickness of a stack of reduced-ply socks of total ply P; and if the thickness of N single socks stacked one on top of the other was equal to the sum (1 to N) of the single sock thicknesses. Technique Using a custom instrument, compressive stresses were applied while sock thickness was measured. Discussion The thickness of one multi-ply sock of ply P was typically less than the thickness of a stack of reduced-ply socks of total ply P. The thickness of N single socks stacked one on top of the other was approximately equal to the sum (1 to N) of the single sock thicknesses. Clinical Relevance Our findings suggest three 1-ply socks to be 20% greater in thickness than one 3-ply sock, and one 3-ply + two 1-ply socks to be 30% greater in thickness than one 5-ply sock. PMID:24240023

  9. Effects of training and anthropometric factors on marathon and 100 km ultramarathon race performance

    PubMed Central

    Tanda, Giovanni; Knechtle, Beat

    2015-01-01

    Background Marathon (42 km) and 100 km ultramarathon races are increasing in popularity. The aim of the present study was to investigate the potential associations of anthropometric and training variables with performance in these long-distance running competitions. Methods Training and anthropometric data from a large cohort of marathoners and 100 km ultramarathoners provided the basis of this work. Correlations between training and anthropometric indices of subjects and race performance were assessed using bivariate and multiple regression analyses. Results A combination of volume and intensity in training was found to be suitable for prediction of marathon and 100 km ultramarathon race pace. The relative role played by these two variables was different, in that training volume was more important than training pace for the prediction of 100 km ultramarathon performance, while the opposite was found for marathon performance. Anthropometric characteristics in terms of body fat percentage negatively affected 42 km and 100 km race performance. However, when this factor was relatively low (ie, less than 15% body fat), the performance of 42 km and 100 km races could be predicted solely on the basis of training indices. Conclusion Mean weekly training distance run and mean training pace were key predictor variables for both marathon and 100 km ultramarathon race performance. Predictive correlations for race performance are provided for runners with a relatively low body fat percentage. PMID:25995653

  10. Global sediment thickness data set updated for the Australian-Antarctic Southern Ocean

    NASA Astrophysics Data System (ADS)

    Whittaker, Joanne M.; Goncharov, Alexey; Williams, Simon E.; Müller, R. Dietmar; Leitchenkov, German

    2013-08-01

    We present a new, 5 min sediment thickness grid for the Australian-Antarctic region (60°E-155°E, 30°S-70°S). New seismic reflection and refraction data have been used to add detail to the conjugate Australian and Antarctic margins and intervening ocean floor where regional sediment thickness patterns were poorly known previously. On the margins, sediment thickness estimates were computed from velocity-depth functions from sonobuoy/refraction velocity solutions ground-truthed against seismic reflection data. For the Southeast Indian Ridge abyssal plains, sediment thickness contours from Geli et al. (2007) were used. The new regional minimum sediment thickness grid was combined with the global National Geophysical Data Center (NGDC) sediment grid to create an updated global grid. Even using the minimum estimates, sediment accumulations on the extended Australian and Antarctic continental margins are 2 km thicker across large regions and up to 9 km thicker in the Ceduna Basin compared to the global NGDC compilation of sediment thickness data.

  11. Janus all-cis-1,2,3,4,5,6-Hexafluorocyclohexane: A Molecular Motif for Aggregation-Induced Enhanced Polarization.

    PubMed

    Pratik, Saied Md; Nijamudheen, Abdulrahiman; Datta, Ayan

    2016-08-01

    Recently synthesized all-cis-1,2,3,4,5,6-hexafluorocyclohexane is the least stable among all possible configurational isomers of 1,2,3,4,5,6-hexafluorocyclohexane. This molecule has a remarkably large dipole moment (6.2 D) as well as high facial polarization. Solid-state, dispersion-corrected DFT (DFT-D3) calculations are performed on the crystalline phase of all-cis-1,2,3,4,5,6- hexafluorocyclohexane, which reveal that dispersion interactions play a crucial role in its stabilization. A number of thermodynamically favorable orientations of dimers, trimers and tetramers are demonstrated for this molecule. Parallel-stacked aggregates, from dimers to higher-order aggregates, which are absent in the crystal, are found to be thermodynamically most favorable due to the presence of strong short-range C-H⋅⋅⋅F-C intermolecular hydrogen-bonding networks. Because of their cooperative nature, binding energies, dipole moments, and polarizations per molecule increase from monomer to tetramer, whereas the HOMO-LUMO gaps follow the opposite trend. Based on the DFT-D3 calculations, it is proposed that this parallel-stacked arrangement can be further extended to prepare stable a 1D crystal such that a large dipole moment and macroscopic polarizations can arise, which might be useful in designing electronic and nonlinear optical devices. Because the molecule has conformational flexibility, the potential energy surface is investigated for ring flipping and the effects of fluorine substitution are studied by comparing the barrier with respect to cyclohexane and all-cis-1,2,3-trifluorocyclohexane. PMID:27124861

  12. Acute tissue-type plasminogen activator release in human microvascular endothelial cells: the roles of Galphaq, PLC-beta, IP3 and 5,6-epoxyeicosatrienoic acid.

    PubMed

    Muldowney, James A S; Painter, Corrie A; Sanders-Bush, Elaine; Brown, Nancy J; Vaughan, Douglas E

    2007-02-01

    The acute physiologic release of tissue-type plasminogen activator (t-PA) from the endothelium is critical for vascular homeostasis. This process is prostacyclin- and nitric oxide (NO)-independent in humans. It has been suggested that calcium signaling and endothelial-derived hyperpolarizing factors (EDHF) may play a role in t-PA release. G-protein-coupled receptor-dependent calcium signaling is typically Galphaq-dependent. EDHFs have been functionally defined and in various tissues are believed to be various regioisomers of the epoxyeicosatrienoic acids (EETs). We tested the hypothesis in vitro that thrombin-stimulated t-PA release from human microvascular endothelial cells (HMECs) is both Galphaq- and EDHF-dependent. Conditioned media was harvested following thrombin stimulation, and t-PA antigen was measured by ELISA. Thrombin-induced t-PA release was limited by a membrane-permeable Galphaq inhibitory peptide, the PLC-beta antagonist U73122, and the IP3 receptor antagonist 2-aminoethoxyphenylborane, while the Galphaq agonist Pasteurella toxin modestly induced t-PA release. The cytochrome P450 (CYP450) inhibitor, miconazole, and the arachidonic acid epoxygenase inhibitor MS-PPOH inhibited thrombin-stimulated t-PA release, while 5,6-EET-methyl ester stimulated t-PA release. The 5,6- and 14,15-EET antagonist, 14,15-epoxyeicosa-5(Z)-enoic acid, inhibited t-PA release at the 100 microM concentration. However, thrombin-stimulated t-PA release was unaffected by the prostacyclin and NO inhibitors ASA and L-NAME, as well as the potassium channel inhibitors TEA, apamin and charybdotoxin. These studies suggest that thrombin-stimulated t-PA release is Galphaq-, PLC-beta-, IP3-, and 5,6-EET-dependent while being prostacyclin-, NO- and K+ channel-independent in HMECs. PMID:17264956

  13. Dimethyl and diethyl esters of 5,6-bis-(pyridin-2-yl)pyrazine-2,3-di-carb-oxy-lic acid: a comparison.

    PubMed

    Alfonso, Montserrat; Stoeckli-Evans, Helen

    2016-02-01

    In dimethyl 5,6-bis-(pyridin-2-yl)pyrazine-2,3-di-carboxyl-ate, C18H14N4O4, (I), and diethyl 5,6-bis-(pyridin-2-yl)pyrazine-2,3-di-carboxyl-ate, C20H18N4O4, (II), the dimethyl and diethyl esters of 5,6-bis-(pyridin-2-yl)pyrazine-2,3-di-carb-oxy-lic acid, the orientation of the two pyridine rings differ. In (I), pyridine ring B is inclined to pyrazine ring A by 44.8 (2)° and the pyridine and pyrazine N atoms are trans to one another, while pyridine ring C is inclined to the pyrazine ring by 50.3 (2)°, with the pyridine and pyrazine N atoms cis to one another. In compound (II), the diethyl ester, which possesses twofold rotation symmetry, the pyridine ring is inclined to the pyrazine ring by 40.7 (1)°, with the pyridine and pyrazine N atoms trans to one another. In the crystal of (I), mol-ecules are linked by C-H⋯N hydrogen bonds, forming chains along [001]. The chains are linked by C-H⋯π inter-actions, forming a three-dimensional structure. In the crystal of (II), mol-ecules are linked via C-H⋯O hydrogen bonds, forming a three-dimensional framework. There are C-H⋯π inter-actions present within the framework. PMID:26958396

  14. Transcriptional profiling of canola developing embryo and identification of the important roles of BnDof5.6 in embryo development and fatty acids synthesis.

    PubMed

    Deng, Wei; Yan, Fang; Zhang, Xiaolan; Tang, Yuwei; Yuan, Yujin

    2015-08-01

    Canola is an important vegetable oil crop globally, and the understanding of the molecular mechanism underlying fatty acids biosynthesis during seed embryo development is an important research goal. Here we report the transcriptional profiling analysis of developing canola embryos using RNA-sequencing (RNA-Seq) method. RNA-Seq analysis generated 58,579,451 sequence reads aligned with 32,243 genes. It was found that a total of 55 differential expression genes (DEGs) encoding 28 enzymes function in carbon flow to fatty acids of storage TAG. Most of the DEGs encoding above enzymes showed similar expression pattern, indicating the DEGs are cooperatively involved in carbon flow into fatty acids. In addition, 41 DEGs associated with signal transductions, transport and metabolic processing of auxin, gibberellin, abscisic acid, cytokinin and salicylic acids were found in the RNA-Seq database, which indicates the important roles of the phytohormones in controlling embryo development and fatty acids synthesis. 122 DEGs encoding transcriptional factor family members were found in developing canola embryos. Furthermore, BnDOF5.6, a zinc finger transcriptional factor gene, found in RNA-Seq database was down-regulated in developing canola embryos. The transgenic plants displayed reduced embryo sizes, decreased fatty acids contents and altered seed fatty acids composition in canola. Down-regulated of BnDof5.6 also changed the expression levels of genes involved in fatty acids synthesis and desaturation. Our results indicate that BnDof5.6 is required for embryo development and fatty acids synthesis in canola. Overall this study presents new information on the global expression patterns of genes during embryo development and will expand our understanding of the complex molecular mechanism of carbon flow into fatty acids and embryo development in canola. PMID:26092973

  15. Recent summer sea ice thickness surveys in Fram Strait and associated ice volume fluxes

    NASA Astrophysics Data System (ADS)

    Krumpen, T.; Gerdes, R.; Haas, C.; Hendricks, S.; Herber, A.; Selyuzhenok, V.; Smedsrud, L.; Spreen, G.

    2016-03-01

    Fram Strait is the main gateway for sea ice export out of the Arctic Ocean, and therefore observations there give insight into the composition and properties of Arctic sea ice in general and how it varies over time. A data set of ground-based and airborne electromagnetic ice thickness measurements collected during summer between 2001 and 2012 is presented here, including long transects well into the southern part of the Transpolar Drift obtained using fixed-wing aircrafts. The primary source of the surveyed sea ice leaving Fram Strait is the Laptev Sea and its age has decreased from 3 to 2 years between 1990 and 2012. The thickness data consistently also show a general thinning of sea ice for the last decade, with a decrease in modal thickness of second year and multiyear ice, and a decrease in mean thickness and fraction of ice thicker than 3 m. Local melting in the strait was investigated in two surveys performed in the downstream direction, showing a decrease in sea ice thickness of 0.19 m degree-1 latitude south of 81° N. Further north variability in ice thickness is more related to differences in age and deformation. The thickness observations were combined with ice area export estimates to calculate summer volume fluxes of sea ice. While satellite data show that monthly ice area export had positive trends since 1980 (10.9 × 103 km2 decade-1), the summer (July and August) ice area export is low with high uncertainties. The average volume export amounts to 16.78 km3. Naturally, the volume flux estimates are limited to the period when airborne thickness surveys are available. Nevertheless, we could show that the combination of satellite data and airborne observations can be used to determine volume fluxes through Fram Strait and as such, can be used to bridge the lack of satellite-based sea ice thickness information in summer.

  16. Multicomponent Double Diels-Alder/Nazarov Tandem Cyclization of Symmetric Cross-Conjugated Diynones to Generate [6-5-6] Tricyclic Products.

    PubMed

    Carmichael, Rachael A; Chalifoux, Wesley A

    2016-06-20

    The construction of complex polycyclic terpenoid products in an efficient and step-economical manner using multicomponent and tandem processes is highly valuable. Herein, we report a tandem cyclization sequence that initiates with a multicomponent double Diels-Alder reaction of cross-conjugated diynones, followed by a Nazarov cyclization to efficiently produce [6-5-6] tricyclic products with excellent regio- and diastereoselectivity. This methodology generates five new carbon-carbon bonds, three rings, quaternary or vicinal quaternary carbons, and stereogenic centers in a one-pot reaction. PMID:27124516

  17. Lasing of multiperiod quantum-cascade lasers in the spectral range of (5.6–5.8)-μm under current pumping

    SciTech Connect

    Egorov, A. Yu. Babichev, A. V.; Karachinsky, L. Ya.; Novikov, I. I.; Nikitina, E. V.; Tchernycheva, M.; Sofronov, A. N.; Firsov, D. A.; Vorobjev, L. E.; Pikhtin, N. A.; Tarasov, I. S.

    2015-11-15

    The lasing of multiperiod quantum-cascade lasers in the spectral range of (5.6–5.8)-μm under current pumping are demonstrated. The quantum-cascade laser heterostructure is grown by molecular-beam epitaxy technique. Despite the relatively short laser cavity length and high level of external loss the laser shows the lasing in the temperature range of 80–220 K. The threshold current density below 4 kA/cm{sup 2} at 220 K with the characteristic temperature T{sub 0} = 123 K was demonstrated.

  18. 5,6,7,8-Tetrahydropyrido[4,3-d]pyrimidines as novel class of potent and highly selective CaMKII inhibitors.

    PubMed

    Asano, Shigehiro; Komiya, Masafumi; Koike, Nobuyuki; Koga, Erina; Nakatani, Shogo; Isobe, Yoshiaki

    2010-11-15

    A novel series of 5,6,7,8-tetrahydropyrido[4,3-d]pyrimidines containing substituted phenyl sulfonamide are synthesized and evaluated for their inhibitory activity against CaMKII. Substituents on the phenyl group had significant impact on CaMKII inhibition, in particular, the inhibitory activity of 8p was 25-fold higher than that of KN-93, a known CaMKII inhibitor. Michaelis-Menten analysis of a representative compound suggested that the synthesized pyrimidines are calmodulin non-competitive inhibitors. Finally, 8p exhibited more than 100-fold higher selectivity for CaMKII over five types of off-target kinases. PMID:20875738

  19. 3,5,6,7,8,3',4'-Heptamethoxyflavone, a citrus flavonoid, on protection against memory impairment and neuronal cell death in a global cerebral ischemia mouse model.

    PubMed

    Okuyama, Satoshi; Morita, Mayu; Miyoshi, Kazuhiro; Nishigawa, Yuki; Kaji, Miki; Sawamoto, Atsushi; Terugo, Tsukasa; Toyoda, Nobuki; Makihata, Nahomi; Amakura, Yoshiaki; Yoshimura, Morio; Nakajima, Mitsunari; Furukawa, Yoshiko

    2014-05-01

    The present study evaluated the effects of treatment with the citrus flavonoid, 3,5,6,7,8,3',4'-heptamethoxyflavone (HMF) on protection against memory impairment and neuronal death in a global cerebral ischemia mouse model. The results showed that HMF, administrated for three days immediately after ischemic surgery, protected against ischemia-induced memory dysfunction, rescued neuronal cell death in the CA1 cell layer, increased the production of BDNF, stimulated the autophosphorylation of CaMK II and suppressed microglial activation in the hippocampus. These results suggest that HMF has a neuroprotective effect after brain ischemia by inducing BDNF production and anti-inflammatory effects. PMID:24657445

  20. Synthesis and Antiproliferative Effects of 5,6-Disubstituted Pyridazin-3(2H)-ones Designed as Conformationally Constrained Combretastatin A-4 Analogues

    PubMed Central

    Elagawany, Mohamed; Schmitt, Martine; Ghiaty, Adel; El-Etrawy, A. Sh.; Ibrahim, Mohamed A.; Bihel, Frédéric; Sbardelotto, Aline Borba; Pessoa, Cláudia; Nguyen, Tam Luong; Hamel, Ernest; Bourguignon, Jean Jacques

    2013-01-01

    Novel 5,6-disubstituted pyridazin-3(2H)-one derivatives were designed and synthesized as combretastatin A-4 analogues. Our objective was to overcome the spontaneous cis to trans isomerization of the compound. We therefore replaced the cis-double bond with a pyridazine ring. The antiproliferative activity of the novel analogues was evaluated against four human cancer cell lines (HL-60, MDA-MB-435, SF-295 and HCT-8). We found that the analogues had little activity either against selected cell lines or against purified tubulin. Molecular modeling studies may account for their inactivity. PMID:23574386

  1. C-(4,5,6-trimethoxyindan-1-yl)methanamine: a mescaline analogue designed using a homology model of the 5-HT2A receptor.

    PubMed

    McLean, Thomas H; Chambers, James J; Parrish, Jason C; Braden, Michael R; Marona-Lewicka, Danuta; Kurrasch-Orbaugh, Deborah; Nichols, David E

    2006-07-13

    A conformationally restricted analogue of mescaline, C-(4,5,6-trimethoxyindan-1-yl)-methanamine, was designed using a 5-HT(2A) receptor homology model. The compound possessed 3-fold higher affinity and potency than and efficacy equal to that of mescaline at the 5-HT(2A) receptor. The new analogue substituted fully for LSD in drug discrimination studies and was 5-fold more potent than mescaline. Resolution of this analogue into its enantiomers corroborated the docking experiments, showing the R-(+) isomer to have higher affinity and potency and to have efficacy similar to that of mescaline at the 5-HT(2A) receptor. PMID:16821786

  2. Shen-Kang protects 5/6 nephrectomized rats against renal injury by reducing oxidative stress through the MAPK signaling pathways

    PubMed Central

    LIU, MEIYOU; PARK, JISOO; WU, XIAOXIAO; LI, YUWEN; TRAN, QUANGDON; MUN, KISUN; LEE, YONGJIN; HUR, GANG MIN; WEN, AIDONG; PARK, JONGSUN

    2015-01-01

    Chronic kidney disease (CKD) is a worldwide public health concern with limited treatment options. The incidence of CDK is increasing and the disease is associated with a poor quality of life and a high financial cost of treatment. Shen-Kang (SK), a traditional Chinese herbal medicine, has been used clinically in the treatment of renal diseases for decades. This study was carried out to validate the therapeutic effects of SK on renal injury induced by 5/6 nephrectomy, as well as its effects on the apoptosis of proximal tubule epithelial cells (HK-2 cells), in an aim to elucidate its mechanisms of action. For this purpose, an animal model of renal injury was created by subjecting rats to a 5/6 nephrectomy. The rats in the sham-operated and model groups received distilled water, while the rats in the SK and enalapril (EN) groups were treated with SK or EN. The levels of blood urea nitrogen (BUN) and serum creatinine (SCr) were measured. Kidney tissues obtained from the rats were stained with hematoxylin and eosin. HK-2 cells were employed to investigate the effects of SK on the apoptosis of renal proximal tubule epithelial cells induced by treatment with hydrogen peroxide (H2O2). In addition, cell viability was measured by MTT assay. Apoptotic events were monitored by western blot analysis, flow cytometric analysis and nuclear morphological anlaysis. The levels of intracellular reactive oxygen species (ROS) were measured by flow cytometric analysis with dihydroethidium staining. The results revealed that the administration of SK to 5/6 nephrectomized rats for 1 week significantly decreased the levels of SCr and BUN. The morphological observations of the kidneys also indicated the amelioration of damage to renal tissue. Treatment of the HK-2 cells with SK significantly protected the cells from H2O2-induced apoptosis, as indicated by an increase in cell viability, the decrease in the cleavage of poly(ADP-ribose) polymerase (PARP) and fewer condensed nuclei. H2O2-induced

  3. Synthesis, structure-activity relationships and biological evaluation of 4,5,6,7-tetrahydropyrazolopyrazines as metabotropic glutamate receptor 5 negative allosteric modulators.

    PubMed

    Hirose, Wataru; Kato, Yoshihiro; Yamamoto, Takayoshi; Kassai, Momoe; Takata, Makoto; Hayashi, Shun; Arai, Yukiyo; Imai, Satoki; Yoshida, Kohzo

    2016-08-15

    The design, synthesis and SAR studies of novel 4,5,6,7-tetrahydropyrazolopyrazines as metabotropic glutamate receptor 5 (mGluR5) negative allosteric modulators (NAMs) are presented in this letter. Starting from a HTS hit compound (1, IC50=477nM), optimization of various groups led to the synthesis of a potent mGluR5 NAM (32, IC50=75nM) with excellent rat PK profile and good brain penetration. This compound produced oral antidepressant-like effect in a mouse tale suspension model (MED: 30mg/kg). PMID:27432763

  4. Intestinal absorption and fecal excretion of 5,6 alpha-epoxy-5 alpha-cholesta-3 beta-ol by the male Wistar rat

    SciTech Connect

    Bascoul, J.; Domergue, N.; Mourot, J.; Debry, G.; Crastes de Paulet, A.

    1986-12-01

    The intestinal absorption of 5,6 alpha-epoxy-5 alpha-cholesta-3 beta-ol, an oxysterol formed by cholesterol autoxidation, has been evaluated in the male Wistar rat. Measurement of the /sup 14/C//sup 3/H ratio in the serum (by the method of Zilversmit and Hugues) and in the feces showed that a large proportion of the epoxide was absorbed. Epoxide clearance from the blood was very rapid, but its excretion in the stool continued for several days, corresponding to the fraction of the epoxide stored in the animal.

  5. A facile synthesis and fungicidal activities of 2-(alkylamino)-5,6-dimethylthieno[2,3-d]pyrimidin-4(3H)-ones

    PubMed Central

    Zheng, Ai-Hua; Ruan, Xu-Zhi

    2008-01-01

    Summary The aza-Wittig reactions of iminophosphorane 3 with aromatic isocyanates generated carbodiimides 4, which were reacted with alkylamines under mild conditions to give a series of 2-(alkylamino)-5,6-dimethylthieno[2,3-d]pyrimidin-4(3H)-ones 6 and 8 in satisfactory yield. Their structures were confirmed by 1H NMR, EI-MS, IR and elementary analysis, and compound 8c was further analyzed by single-crystal X-ray diffraction. The preliminary bioassays indicated that these compounds showed excellent fungicidal activities against six kinds of fungi. PMID:19190737

  6. Crystal structure of 2-amino-7,7-dimethyl-5-oxo-4-(pyridin-4-yl)-5,6,7,8-tetrahydro-4 H-chromene-3-carbonitrile hemihydrate

    NASA Astrophysics Data System (ADS)

    Sharma, N.; Banerjee, B.; Brahmachari, G.; Kant, R.; Gupta, V. K.

    2015-12-01

    The title compound, 2-amino-7,7-dimethyl-5-oxo-4-(pyridin-4-yl)-5,6,7,8-tetrahydro-4 Hchromene-3-carbonitrile was synthesized by multicomponent reaction at room temperature using commercially available urea as inexpensive and environmentally benign organo-catalyst. Its structure was determined by X-ray structure analysis. The crystals are monoclinic, sp. gr. C2/ c, a = 22.010(6), b = 11.0364(10), c = 17.147(4) Å, β = 130.37(4)°, Z = 8, R = 0.0433 for 2377 observed reflections.

  7. Lipophilic and hydrophilic esters of 4-acetyl-2-(2-hydroxyethyl)-5,6-bis(4-chlorophenyl)-2H-pyridazin-3-one as antihypertensive agents.

    PubMed

    Fogt, S W; Scozzie, J A; Heilman, R D; Powers, L J

    1980-12-01

    In an attempt to enhance the antihypertensive activity of 4-acetyl-2-(2-hydroxyethyl)-5,6-bis(4-chlorophenyl)-2H-pyridazin-3-one, 1, a series of lipophilic and hydrophilic esters was synthesized. These derivatives possessed increased lipid and aqueous solubility, respectively. The esters, in general, cause a larger blood-pressure drop than 1 when tested at high doses in the spontaneously hypertensive rat (SHR) model. At lower doses the antihypertensive activity is the same as with 1. PMID:7452699

  8. Effect of cordycepin(3'-deoxyadenosine) on excision repair of 5,6-dihydroxy-dihydrothymine-type products from the DNA of Micrococcus radiodurans

    SciTech Connect

    Patil, M.S.; Tundo, V.J.; Locher, S.E.; Hariharan, P.V.

    1983-07-01

    Cordycepin(3'-deoxyadenosine), a nucleoside analog, has been shown to enhance radiation-induced cell killing. In an effort to elucidate the possible mechanism for enhancement of cell killing, the effect of cordycepin on the excision repair of radiation-induced 5,6-dihydroxy-dihydrothymine-type (t') products from the DNA of wild type Micrococcus radiodurans was investigated. The capacity of M. radiodurans to excise nondimeric (t') products from its DNA was significantly impaired after cordycepin treatment. The results suggest that the increased radiation sensitivity of cordycepin-treated cells could be due to alterations in cellular processes that repair DNA damage.

  9. Isorecticular Synthesis of Dissectible Molecular Bamboo Tubes of Hexarhenium(I) Benzene-1,2,3,4,5,6-hexaolate Complexes.

    PubMed

    Tseng, Tien-Wen; Luo, Tzuoo-Tsair; Liao, Shi-Hao; Lu, Kai-Hsiang; Lu, Kuang-Lieh

    2016-07-11

    A family of bamboo-like metal-organic nanotubes consisting of in situ synthesized macromolecular blocks (MB) is reported. The MBs are composed of six fac-(CO)3 Re cores, one benzene-1,2,3,4,5,6-hexaolate plate, and six pyridine-derivative pillar ligands, which have a doubly tri-legged geometry and can be mutually assembled, piece by piece. This entire system is characterized as a simple but precise supramolecular complexation of these macromolecular blocks and further introduces an archetypal approach to systematically constructing a tunable form of dissectible molecular bamboo tubes. PMID:27126190

  10. Cleft Lip/Palate, Short Stature, and Developmental Delay in a Boy with a 5.6-Mb Interstitial Deletion Involving 10p15.3p14

    PubMed Central

    Gamba, Bruno F.; Rosenberg, Carla; Costa, Silvia; Richieri-Costa, Antonio; Ribeiro-Bicudo, Lucilene A.

    2015-01-01

    The chromosome interval 10p15.3p14 harbors about a dozen genes. This region has been implicated in a few well-known human phenotypes, namely HDR syndrome (hypoparathyroidism, sensorineural deafness, and renal dysplasia) and DGS2 (DiGeorge syndrome 2), but a number of variable phenotypes have also been reported. Cleft lip/palate seems to be a very unusual finding within the clinical spectrum of patients with this deletion. Here, we report a male child born with short stature, cleft lip/palate, and feeding problems who was found to have a 5.6-Mb deletion at 10p15.3p14. PMID:25852446

  11. One-pot synthesis of tetrazole-1,2,5,6-tetrahydronicotinonitriles and cholinesterase inhibition: Probing the plausible reaction mechanism via computational studies.

    PubMed

    Hameed, Abdul; Zehra, Syeda Tazeen; Abbas, Saba; Nisa, Riffat Un; Mahmood, Tariq; Ayub, Khurshid; Al-Rashida, Mariya; Bajorath, Jürgen; Khan, Khalid Mohammed; Iqbal, Jamshed

    2016-04-01

    In the present study, one-pot synthesis of 1H-tetrazole linked 1,2,5,6-tetrahydronicotinonitriles under solvent-free conditions have been carried out in the presence of tetra-n-butyl ammonium fluoride trihydrated (TBAF) as catalyst and solvent. Computational studies have been conducted to elaborate two plausible mechanistic pathways of this one-pot reaction. Moreover, the synthesized compounds were screened for cholinesterases (acetylcholinesterase and butyrylcholinesterase) inhibition which are consider to be major malefactors of Alzheimer's disease (AD) to find lead compounds for further research in AD therapy. PMID:26851737

  12. Facile synthesis of 4,5,6a,7-tetrahydrodibenzo[de,g]chromene heterocycles and their transformation to phenanthrene alkaloids

    PubMed Central

    Kapadia, Nirav; Harding, Wayne

    2013-01-01

    Oxa-Pictet-Spengler cyclization and microwave-assisted C-H arylation have been implemented as key steps in the synthesis of new isochroman heterocycles containing a 4,5,6a,7-tetrahydrodibenzo[de,g]chromene motif. These isochromans may be easily transformed to phenanthrene alkaloids via acidic cleavage of the isochroman ring and standard synthetic manipulations thereafter. The route described is attractive in that it provides access to two biologically interesting scaffolds in simple and high yielding synthetic steps. PMID:24187388

  13. Etude par spectrometrie infrarouge et Raman de la triméthyl-4,5,6 pyrimidone-2 et de son chlorhydrate. Complexation par les halogenures de potassium

    NASA Astrophysics Data System (ADS)

    Lautié, Alain; Picquenard, Eric; Ratovelomanana, Nicole

    The i.r. Raman spectra of crystalline 4,5,6-trimethyl 2-pyrimidone and seven deuterated derivatives have been investigated between 4000 and 180 cm -1. Aqueous and CHCl 3 solutions were also examined. An assignment for intramolecular fundamentals is given, as well as a distinction between the most characteristic of each methyl group. The methylation and protonation effects are discussed. Furthermore, a 1/1 adduct of this pyrimidone and potassium halides is observed and characterized; it contains a strong NH…X - hydrogen bond.

  14. 1,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles: identification of a potent Aurora kinase inhibitor with a favorable antitumor kinase inhibition profile.

    PubMed

    Fancelli, Daniele; Moll, Jürgen; Varasi, Mario; Bravo, Rodrigo; Artico, Roberta; Berta, Daniela; Bindi, Simona; Cameron, Alexander; Candiani, Ilaria; Cappella, Paolo; Carpinelli, Patrizia; Croci, Walter; Forte, Barbara; Giorgini, Maria Laura; Klapwijk, Jan; Marsiglio, Aurelio; Pesenti, Enrico; Rocchetti, Maurizio; Roletto, Fulvia; Severino, Dino; Soncini, Chiara; Storici, Paola; Tonani, Roberto; Zugnoni, Paola; Vianello, Paola

    2006-11-30

    The optimization of a series of 5-phenylacetyl 1,4,5,6-tetrahydropyrrolo[3,4-c]pyrazole derivatives toward the inhibition of Aurora kinases led to the identification of compound 9d. This is a potent inhibitor of Aurora kinases that also shows low nanomolar potency against additional anticancer kinase targets. Based on its high antiproliferative activity on different cancer cell lines, favorable chemico-physical and pharmacokinetic properties, and high efficacy in in vivo tumor models, compound 9d was ultimately selected for further development. PMID:17125279

  15. Synthesis of Novel 3-Aryl-N-Methyl-1,2,5,6-Tetrahydropyridine Derivatives by Suzuki coupling: As Acetyl Cholinesterase Inhibitors

    PubMed Central

    Prasad, S.B. Benaka; Kumar, Y.C. Sunil; Kumar, C.S. Ananda; Sadashiva, C.T; Vinaya, K; Rangappa, K.S

    2007-01-01

    Alzheimer’s disease (AD) is a neurodegenerative disorder affecting the central nervous system, which is also associated with progressive loss of memory and cognition. The development of numerous structural classes of compounds with different pharmacological profile could be an evolving, promising therapeutic approach for the treatment of AD. Thus, providing a symptomatic treatment for this disease are cholinomimetics with the pharmacological profile of Acetylcholinesterase (AChE) inhibitors. In view of this, we have synthesized novel 3-aryl-N-methyl-1,2,5,6-tetrahydropyridine derivatives 5a-k by Suzuki coupling and screened the efficacy of these derivatives for their AChE inhibitor activity. PMID:19662135

  16. Microstrip dipole antennas on electrically thick substrates

    NASA Astrophysics Data System (ADS)

    Jackson, D. R.; Alexopoulos, N. G.

    1985-10-01

    Printed circuit antennas are attractive radiation sources both at microwave and millimeter wave frequencies. However, for millimeter wave applications where the substrate is likely to be electrically thick, it is important to understand the basic effects of a thick substrate on radiation characteristics. In particular, it is concluded here that dipole radiation properties become sensitive to loss as the substrate becomes thick. Furthermore, the efficiency of dipoles on thick substrates tends to be low, especially as the dielectric constant of the substrate increases. A method of improving both the efficiency and gain can be used for thick substrates, however, which uses a superstrate layer on top of the antenna.

  17. Intelligent processing for thick composites

    NASA Astrophysics Data System (ADS)

    Shin, Daniel Dong-Ok

    2000-10-01

    Manufacturing thick composite parts are associated with adverse curing conditions such as large in-plane temperature gradient and exotherms. The condition is further aggravated because the manufacturer's cycle and the existing cure control systems do not adequately counter such affects. In response, the forecast-based thermal control system is developed to have better cure control for thick composites. Accurate cure kinetic model is crucial for correctly identifying the amount of heat generated for composite process simulation. A new technique for identifying cure parameters for Hercules AS4/3502 prepreg is presented by normalizing the DSC data. The cure kinetics is based on an autocatalytic model for the proposed method, which uses dynamic and isothermal DSC data to determine its parameters. Existing models are also used to determine kinetic parameters but rendered inadequate because of the material's temperature dependent final degree of cure. The model predictions determined from the new technique showed good agreement to both isothermal and dynamic DSC data. The final degree of cure was also in good agreement with experimental data. A realistic cure simulation model including bleeder ply analysis and compaction is validated with Hercules AS4/3501-6 based laminates. The nonsymmetrical temperature distribution resulting from the presence of bleeder plies agreed well to the model prediction. Some of the discrepancies in the predicted compaction behavior were attributed to inaccurate viscosity and permeability models. The temperature prediction was quite good for the 3cm laminate. The validated process simulation model along with cure kinetics model for AS4/3502 prepreg were integrated into the thermal control system. The 3cm Hercules AS4/3501-6 and AS4/3502 laminate were fabricated. The resulting cure cycles satisfied all imposed requirements by minimizing exotherms and temperature gradient. Although the duration of the cure cycles increased, such phenomena was

  18. Experimental technique to simulate orbital-debris impact on space shields at impact velocities over 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Boslough, M.B.

    1992-12-31

    With the development of a new HyperVelocity Launcher, HVL, at Sandia, it is now possible to perform experiments over the velocity range of 7 to 12 km/s. This velocity range has not been previously accessible for gram-size plates. This meets the requisite mass-velocity criteria established for the orbital debris environment. In this paper, the technique employed to launch thin flier plates to velocities not previously accessible on a two-stage light-gas gun is reported. In particular, this technique has been used on a two-stage light-gas gun to launch nominally 0.5 to 1.0-mm thick aluminum, titanium, and magnesium flier plates intact to velocities up to 12.2 km/s. Since the mass-velocity capability of the newly developed HVL meets the average specifications of the space debris environment, it is expected to be a useful tool to evaluate the effects of debris impact on space structures and debris shields. Examples of a plate impact i.e., orbital debris impact on a thin Whipple shield are presented in this paper.

  19. Experimental technique to simulate orbital-debris impact on space shields at impact velocities over 10 km/s

    SciTech Connect

    Chhabildas, L.C.; Boslough, M.B.

    1992-01-01

    With the development of a new HyperVelocity Launcher, HVL, at Sandia, it is now possible to perform experiments over the velocity range of 7 to 12 km/s. This velocity range has not been previously accessible for gram-size plates. This meets the requisite mass-velocity criteria established for the orbital debris environment. In this paper, the technique employed to launch thin flier plates to velocities not previously accessible on a two-stage light-gas gun is reported. In particular, this technique has been used on a two-stage light-gas gun to launch nominally 0.5 to 1.0-mm thick aluminum, titanium, and magnesium flier plates intact to velocities up to 12.2 km/s. Since the mass-velocity capability of the newly developed HVL meets the average specifications of the space debris environment, it is expected to be a useful tool to evaluate the effects of debris impact on space structures and debris shields. Examples of a plate impact i.e., orbital debris impact on a thin Whipple shield are presented in this paper.

  20. Pavement thickness evaluation using ground penetrating radar

    NASA Astrophysics Data System (ADS)

    Harris, Dwayne Arthur

    Accurate knowledge of pavement thickness is important information to have both at a network and project level. This information aids in pavement management and design. Much of the time this information is missing, out of date, or unknown for highway sections. Current technologies for determining pavement thickness are core drilling, falling weight deflectometer (FWD), and ground penetrating radar (GPR). Core drilling provides very accurate pin point pavement thickness information; however, it is also time consuming, labor intensive, intrusive to traffic, destructive, and limited in coverage. FWD provides nondestructive estimates of both a surface thickness and total pavement structure thickness, including pavement, base and sub-base. On the other hand, FWD is intrusive to traffic and affected by the limitations and assumptions the method used to estimate thickness. GPR provides pavement surface course thickness estimates with excellent data coverage at highway speed. Yet, disadvantages include the pavement thickness estimation being affected by the electrical properties of the pavement, limitations of the system utilized, and heavy post processing of the data. Nevertheless, GPR has been successfully utilized by a number of departments of transportation (DOTs) for pavement thickness evaluation. This research presents the GPR thickness evaluation methods, develops GPRPAVZ the software used to implement the methodologies, and addresses the quality of GPR pavement thickness evaluation.