Science.gov

Sample records for 55-pound bushel container

  1. 76 FR 7095 - Avocados Grown in South Florida; Increased Assessment Rate

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ... Service 7 CFR Part 915 Avocados Grown in South Florida; Increased Assessment Rate AGENCY: Agricultural... rate established for the Avocado Administrative Committee (Committee), for the 2010-11 and subsequent fiscal periods from $0.27 to $0.37 per 55-pound bushel container of Florida avocados handled....

  2. 77 FR 71688 - Avocados Grown in South Florida; Decreased Assessment Rate

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-04

    ... Agricultural Marketing Service 7 CFR Part 915 Avocados Grown in South Florida; Decreased Assessment Rate AGENCY... the assessment rate established for the Avocado Administrative Committee (Committee) for the 2012-13 and subsequent fiscal periods from $0.37 to $0.25 per 55-pound bushel container of Florida...

  3. Findings and actions by the IR-4 Project in response to a bushel of EPA inspections.

    PubMed

    Hackett-Fields, K; White, T L

    1999-01-01

    The IR-4 Project is dedicated to all aspects of minor crop pest management, in cooperation between USDA, universities, and other state or Federal entities. Human safety decisions made by EPA are based upon field raw data, analytical reports, and scientific review and interpretation. Quality Assurance personnel, an independent body of internal inspectors and auditors, assist both regulatory inspector and on-site field personnel during EPA site inspections. This article contains information gleaned from a large number of university and other test site inspections, which were conducted by EPA to fulfill requirements of Good Laboratory Practice regulations, 40 CFR 160.

  4. A Bushelful of Science.

    ERIC Educational Resources Information Center

    Van De Walle, Carol

    1988-01-01

    Describes a multidisciplinary unit which uses 12 varieties of apples. Explains activities for observing, predicting decay, art and science, the process of fermentation, and group and individual projects. Information on description of apples and labeled diagrams are included. (RT)

  5. "Measuring by the bushel": reweighing the Indian Ocean pepper trade.

    PubMed

    Prange, Sebastian R

    2011-01-01

    Of all the oriental spices, black pepper was the most important until the eighteenth century. The historiography of the pepper trade is characterized by a strong focus on Europe in terms of both its economic significance in the ancient and medieval periods and the struggle for its control in the early modern period. This article, by contrast, seeks to situate the pepper trade firmly in its Asian contexts. It examines the Indian Ocean pepper trade from three perspectives. First, it places the trade in its supply-side context by focusing on the Malabar coast as the primary source of pepper. Second, it examines the relative importance of the different branches of Malabar's pepper trade and highlights the central role played by Muslim mercantile networks. Third, it considers the reconfiguration of these pepper networks in the sixteenth century in the face of aggressive competition from the Portuguese. In their sum, these arguments advocate the need for rethought balances of trade and a reweighted scholarly focus on the pepper trade in its global dimensions.

  6. Sharps container

    NASA Technical Reports Server (NTRS)

    Lee, Angelene M. (Inventor)

    1992-01-01

    This invention relates to a system for use in disposing of potentially hazardous items and more particularly a Sharps receptacle for used hypodermic needles and the like. A Sharps container is constructed from lightweight alodined nonmagnetic metal material with a cup member having an elongated tapered shape and length greater than its transverse dimensions. A magnet in the cup member provides for metal retention in the container. A nonmagnetic lid member has an opening and spring biased closure flap member. The flap member is constructed from stainless steel. A Velcro patch on the container permits selective attachment at desired locations.

  7. Collapsing Containers.

    ERIC Educational Resources Information Center

    Brown, Justina L.; Battino, Rubin

    1994-01-01

    Describes variations on atmospheric pressure demonstrations and some systematic studies. Demonstrations use steam, generated either externally or internally to the container, to sweep out residual air. Preferred vessels collapsed slowly. Demonstrations use plastic milk jugs set in layers of aluminum foil, pop bottles immersed in 4-L beakers…

  8. CONTAINMENT TECHNOLOGIES

    EPA Science Inventory

    Hazardous waste containment's primary objective is to isolate wastes deemed as hazardous from man and environmental systems of air, soil, and water. Hazardous wastes differ from other waste classifications due to their increased potential to cause human health effects or environ...

  9. Repository containment

    SciTech Connect

    Beale, H.; Mogg, C.

    1994-12-31

    UK Nirex Limited is concentrating its further investigations at Sellafield in Cumbria to establish the sites suitability as a safe location for a deep disposal facility for intermediate and low level radioactive waste. Good progress has been achieved in the Site Characterization Program. The emerging picture of the geology and hydrogeology continues to suggest that the site holds good promise as a potential repository location. This paper sets out the latest results from site investigations at Sellafield and reviews some possibilities for enhancing waste containment deep underground at the site.

  10. Looking under the Bushels: Schools Still Applying Local Solutions to National Teacher Recruitment Problem.

    ERIC Educational Resources Information Center

    Traviss, Sister Mary Peter

    2001-01-01

    Discusses the national teacher shortage in Catholic schools. Reports findings from a survey of Catholic school superintendents conducted by the Chief Administrators of Catholic Education. Found that the most effective recruitment efforts were schools seeking teachers from within local communities through parish bulletins and word of mouth. (CJW)

  11. Optimization of oil extraction from giant bushel gourd seeds using response surface methodology.

    PubMed

    Popoola, Yetunde Yemisi; Akinoso, Rahman; Raji, Akeem Olayemi

    2016-09-01

    Gourd seeds have been identified as a source of edible oil, but there is sparse literature on the effect of processing factors on the characteristics of oil extracted from any Lagenaria spp. Optimization of oil extraction with the aid of expeller was achieved by applying response surface methodology. The variables were roasting temperature (87.70-172.0°C) and roasting duration (7.93-22.07 min), while the responses were oil yield and oil quality (free fatty acid, color, specific gravity, saponification value, moisture, and refractive index). Data obtained were analyzed at P < 0.05. Roasting conditions significantly influenced all the responses at P < 0.05. The optimum roasting condition was 100°C for 20 min, which gave 27.62% oil yield with good quality attributes (free fatty acid: 0.61%, color: 3.47 abs, specific gravity: 0.90 g/mL, saponification value: 289.66 mL, and refractive index: 1.47).

  12. Secondary Containers and Service Containers for Pesticides

    EPA Pesticide Factsheets

    Secondary containers and service containers are used by pesticide applicators in the process of applying a pesticide. EPA does not require secondary containers or service containers to be labeled or to meet particular construction standards. Learn more.

  13. Explosive parcel containment and blast mitigation container

    DOEpatents

    Sparks, Michael H.

    2001-06-12

    The present invention relates to a containment structure for containing and mitigating explosions. The containment structure is installed in the wall of the building and has interior and exterior doors for placing suspicious packages into the containment structure and retrieving them from the exterior of the building. The containment structure has a blast deflection chute and a blowout panel to direct over pressure from explosions away from the building, surrounding structures and people.

  14. Sealed container sampling device

    NASA Technical Reports Server (NTRS)

    Hennigan, T. J.

    1969-01-01

    Sampling device, by means of a tapered needle, pierces a sealed container while maintaining the seal and either evacuates or pressurizes the container. This device has many applications in the chemical, preservative and battery-manufacturing industries.

  15. Accident resistant transport container

    DOEpatents

    Andersen, John A.; Cole, James K.

    1980-01-01

    The invention relates to a container for the safe air transport of plutonium having several intermediate wood layers and a load spreader intermediate an inner container and an outer shell for mitigation of shock during a hypothetical accident.

  16. Accident resistant transport container

    DOEpatents

    Anderson, J.A.; Cole, K.K.

    The invention relates to a container for the safe air transport of plutonium having several intermediate wood layers and a load spreader intermediate an inner container and an outer shell for mitigation of shock during a hypothetical accident.

  17. Fluid transport container

    DOEpatents

    DeRoos, Bradley G.; Downing, Jr., John P.; Neal, Michael P.

    1995-01-01

    An improved fluid container for the transport, collection, and dispensing of a sample fluid that maintains the fluid integrity relative to the conditions of the location at which it is taken. More specifically, the invention is a fluid sample transport container that utilizes a fitment for both penetrating and sealing a storage container under controlled conditions. Additionally, the invention allows for the periodic withdrawal of portions of the sample fluid without contamination or intermixing from the environment surrounding the sample container.

  18. Fluid transport container

    DOEpatents

    DeRoos, B.G.; Downing, J.P. Jr.; Neal, M.P.

    1995-11-14

    An improved fluid container for the transport, collection, and dispensing of a sample fluid that maintains the fluid integrity relative to the conditions of the location at which it is taken. More specifically, the invention is a fluid sample transport container that utilizes a fitting for both penetrating and sealing a storage container under controlled conditions. Additionally, the invention allows for the periodic withdrawal of portions of the sample fluid without contamination or intermixing from the environment surrounding the sample container. 13 figs.

  19. Generic Fortran Containers (GFC)

    SciTech Connect

    Liakh, Dmitry

    2016-09-01

    The Fortran language does not provide a standard library that implements generic containers, like linked lists, trees, dictionaries, etc. The GFC software provides an implementation of generic Fortran containers natively written in Fortran 2003/2008 language. The following containers are either already implemented or planned: Stack (done), Linked list (done), Tree (done), Dictionary (done), Queue (planned), Priority queue (planned).

  20. Personal Container Artists.

    ERIC Educational Resources Information Center

    Szekely, George

    2002-01-01

    Focuses on the study of personal containers and their uses in art creation for children. States that children are fascinated by boxes and containers. Provides examples of personal containers, such as lunch boxes, pencil cases, purses and valets, and school bags. (CMK)

  1. Pressure suppression containment system

    DOEpatents

    Gluntz, D.M.; Townsend, H.E.

    1994-03-15

    A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of-coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto. 6 figures.

  2. Passive containment cooling system

    DOEpatents

    Billig, Paul F.; Cooke, Franklin E.; Fitch, James R.

    1994-01-01

    A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA.

  3. Pressure suppression containment system

    DOEpatents

    Gluntz, Douglas M.; Townsend, Harold E.

    1994-03-15

    A pressure suppression containment system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel. The wetwell pool includes a plenum for receiving the non-condensable gas carried with steam from the drywell following a loss-of coolant-accident (LOCA). The wetwell plenum is vented to a plenum above the GDCS pool following the LOCA for suppressing pressure rise within the containment vessel. A method of operation includes channeling steam released into the drywell following the LOCA into the wetwell pool for cooling along with the non-condensable gas carried therewith. The GDCS pool is then drained by gravity, and the wetwell plenum is vented into the GDCS plenum for channeling the non-condensable gas thereto.

  4. Passive containment cooling system

    DOEpatents

    Billig, P.F.; Cooke, F.E.; Fitch, J.R.

    1994-01-25

    A passive containment cooling system includes a containment vessel surrounding a reactor pressure vessel and defining a drywell therein containing a non-condensable gas. An enclosed wetwell pool is disposed inside the containment vessel, and a gravity driven cooling system (GDCS) pool is disposed above the wetwell pool in the containment vessel and is vented to the drywell. An isolation pool is disposed above the GDCS pool and includes an isolation condenser therein. The condenser has an inlet line disposed in flow communication with the drywell for receiving the non-condensable gas along with any steam released therein following a loss-of-coolant accident (LOCA). The condenser also has an outlet line disposed in flow communication with the drywell for returning to the drywell both liquid condensate produced upon cooling of the steam and the non-condensable gas for reducing pressure within the containment vessel following the LOCA. 1 figure.

  5. Container for radioactive materials

    DOEpatents

    Fields, Stanley R.

    1985-01-01

    A container for housing a plurality of canister assemblies containing radioactive material and disposed in a longitudinally spaced relation within a carrier to form a payload package concentrically mounted within the container. The payload package includes a spacer for each canister assembly, said spacer comprising a base member longitudinally spacing adjacent canister assemblies from each other and a sleeve surrounding the associated canister assembly for centering the same and conducting heat from the radioactive material in a desired flow path.

  6. Passive containment cooling system

    DOEpatents

    Conway, Lawrence E.; Stewart, William A.

    1991-01-01

    A containment cooling system utilizes a naturally induced air flow and a gravity flow of water over the containment shell which encloses a reactor core to cool reactor core decay heat in two stages. When core decay heat is greatest, the water and air flow combine to provide adequate evaporative cooling as heat from within the containment is transferred to the water flowing over the same. The water is heated by heat transfer and then evaporated and removed by the air flow. After an initial period of about three to four days when core decay heat is greatest, air flow alone is sufficient to cool the containment.

  7. CONTAIN independent peer review

    SciTech Connect

    Boyack, B.E.; Corradini, M.L.; Denning, R.S.; Khatib-Rahbar, M.; Loyalka, S.K.; Smith, P.N.

    1995-01-01

    The CONTAIN code was developed by Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission (NRC) to provide integrated analyses of containment phenomena. It is used to predict nuclear reactor containment loads, radiological source terms, and associated physical phenomena for a range of accident conditions encompassing both design-basis and severe accidents. The code`s targeted applications include support for containment-related experimental programs, light water and advanced light water reactor plant analysis, and analytical support for resolution of specific technical issues such as direct containment heating. The NRC decided that a broad technical review of the code should be performed by technical experts to determine its overall technical adequacy. For this purpose, a six-member CONTAIN Peer Review Committee was organized and a peer review as conducted. While the review was in progress, the NRC issued a draft ``Revised Severe Accident Code Strategy`` that incorporated revised design objectives and targeted applications for the CONTAIN code. The committee continued its effort to develop findings relative to the original NRC statement of design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications. However, the revised CONTAIN design objectives and targeted applications were considered by the Committee in assigning priorities to the Committee`s recommendations. The Committee determined some improvements are warranted and provided recommendations in five code-related areas: (1) documentation, (2) user guidance, (3) modeling capability, (4) code assessment, and (5) technical assessment.

  8. Flywheel containment technology assessment

    NASA Astrophysics Data System (ADS)

    Coppa, A. P.; Zweben, C. H.; Mirandy, L.

    1980-07-01

    The important effect of containment weight on the density of a flywheel was examined for a selection of flywheel designs incorporating metallic and composite construction as contained by steel housings. Three different flywheel constructions are presented, namely laminated rotor, shaped disk, and multirim. Materials are steel for the first two types and E glass, S glass and Kevlar composites for the third type. All of the flywheels were comparable in that their stress levels were based on long term high cycle operation. All of the specific energy values were penalized heavily by the containment weight, the least being the laminated rotor (-29 percent) and the greatest being the shaped disk (-72 percent). The penalties for the multirim designs are -45 percent (E glass), -55 percent (S glass), and -60 percent (Kevlar). The low penalty of the laminated steel rotor was due to the fact that the containment weight was based on withstanding the rupture of only one of the constituent disks. The high penalty of the shaped steel disk, on the other hand, reflects the severe containment action that resulted from its bursting into large, hard, and axially narrow fragments. The intermediate but nevertheless substantial containment penalty of the multidrum composite rotors resulted from their relatively mild containment behavior.

  9. OBOE containment prospectus

    SciTech Connect

    Burkhard, N R

    1999-11-19

    The OBOE series of experiments presents a new fielding concept for LLNL subcritical experiments. An experimental alcove will be reused for many different experiments. Each individual experiment will be conducted within a steel experimental vessel. After each experiment, the vessel will be moved to the back of the alcove and entombed in grout. The alcove is designed with sufficient space to entomb 12 experiment vessels. Each experiment in the OBOE series of experiments is composed of one experimental package. Each experimental package will have high explosive (HE) and special nuclear material (SNM) in a subcritical assembly. Each experimental package will be placed in a steel experimental vessel within the OBOE zero-room. Each experiment will be detonated inside its experimental vessel in the OBOE zero-room that is formed by a steel and concrete barrier at the entrance to the U1a.102C drift. The containment plan for the OBOE series of experiments utilizes a two containment vessel concept. The first containment vessel is formed by the primary containment barrier that seals the U1a.102C drift. The second containment vessel is formed by the secondary containment barrier in the U1a.100 drift. While it is likely that the experiment vessel will contain the SNM from an experiment, the containment plan for the OBOE series only assumes that the steel experiment vessel provides shock mitigation and is a heat sink for the heat produced by the detonation of the HE. It is possible that one or more of the experimental vessels may seep SNM in the zero-room from a failure of a seal on the vessel. We are presenting a containment plan for the entire series of OBOE experiments. At this time, we do not know exactly how many experiments will actually be conducted in the OBOE series. However, we do know that the maximum number of experiments in the OBOE series is 12. After the final experiment in the OBOE series, a larger experiment will be conducted in the U1a.102C alcove. This

  10. Container for radioactive materials

    DOEpatents

    Fields, S.R.

    1984-05-30

    A container is claimed for housing a plurality of canister assemblies containing radioactive material. The several canister assemblies are stacked in a longitudinally spaced relation within a carrier to form a payload concentrically mounted within the container. The payload package includes a spacer for each canister assembly, said spacer comprising a base member longitudinally spacing adjacent canister assemblies from each other and sleeve surrounding the associated canister assembly for centering the same and conducting heat from the radioactive material in a desired flow path. 7 figures.

  11. Lanthanide-containing polyimides

    NASA Technical Reports Server (NTRS)

    Stoakley, D. M.; St. Clair, Anne K.

    1987-01-01

    The preparation of a variety of lanthanide-containing polyimide films is described, and results of their characterization are presented. The properties investigated include the glass transition temperature, thermooxidative stability, magnetic susceptibility, and electrical conductivity of the polymer. Films containing lanthanide chlorides, fluorides, and sulfides are flexible, but those containing lanthanide nitrates are extremely brittle. The addition of lanthanide acetates and acetylacetonates caused immediate gelation of two of the synthesis-mixture ingredients. It was found that, in general, the addition of lanthanide to the polyimide increases the density and glass transition temperature of the polymer but slightly decreases the thermooxidative stability.

  12. Advanced Containment System

    DOEpatents

    Kostelnik, Kevin M.; Kawamura, Hideki; Richardson, John G.; Noda, Masaru

    2005-02-08

    An advanced containment system for containing buried waste and associated leachate. The advanced containment system comprises a plurality of casing sections with each casing section interlocked to an adjacent casing section. Each casing section includes a complementary interlocking structure that interlocks with the complementary interlocking structure on an adjacent casing section. A barrier filler substantially fills the casing sections and may substantially fill the spaces of the complementary interlocking structure to form a substantially impermeable barrier. Some of the casing sections may include sensors so that the casing sections and the zone of interest may be remotely monitored after the casing sections are emplaced in the ground.

  13. Lightweight flywheel containment

    DOEpatents

    Smith, James R.

    2001-01-01

    A lightweight flywheel containment composed of a combination of layers of various material which absorb the energy of a flywheel structural failure. The various layers of material act as a vacuum barrier, momentum spreader, energy absorber, and reaction plate. The flywheel containment structure has been experimentally demonstrated to contain carbon fiber fragments with a velocity of 1,000 m/s and has an aerial density of less than 6.5 g/square centimeters. The flywheel containment, may for example, be composed of an inner high toughness structural layer, and energy absorbing layer, and an outer support layer. Optionally, a layer of impedance matching material may be utilized intermediate the flywheel rotor and the inner high toughness layer.

  14. Lightweight flywheel containment

    DOEpatents

    Smith, James R.

    2004-06-29

    A lightweight flywheel containment composed of a combination of layers of various material which absorb the energy of a flywheel structural failure. The various layers of material act as a vacuum barrier, momentum spreader, energy absorber, and reaction plate. The flywheel containment structure has been experimentally demonstrated to contain carbon fiber fragments with a velocity of 1,000 m/s and has an aerial density of less than 6.5 g/square centimeters. The flywheel containment, may for example, be composed of an inner high toughness structural layer, and energy absorbing layer, and an outer support layer. Optionally, a layer of impedance matching material may be utilized intermediate the flywheel rotor and the inner high toughness layer.

  15. FREIGHT CONTAINER LIFTING STANDARD

    SciTech Connect

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  16. Container cover closure apparatus

    DOEpatents

    Griesau, Richard A.

    2000-01-01

    The present invention relates generally to handling and/or storing hazardous waste materials, such as radioactive materials, and is more specifically directed to loading and/or unloading radioactive material into or out of a container, such as a drum, by remote operation, and more particularly the present invention relates to the remote opening and/or closing of a container secured by a compression ring.

  17. Coatings for secondary containment

    SciTech Connect

    Ellisor, M.W.

    1995-12-31

    Federal environmental legislation has established minimum requirements for secondary containment of both hazardous wastes and petroleum products for aboveground storage tanks. Of the systems listed, the most commonly used containment is the concrete vault. Regulations require that the vault must be protected with an impermeable lining that is also compatible with the stored waste. This paper explores the selection criteria for such linings and the various types of linings on the market today.

  18. Echo 1 container

    NASA Technical Reports Server (NTRS)

    1964-01-01

    Echo 1 container: The design of this container was one of the most difficult technical tasks. Hansen writes: 'After several weeks of examining potential solutions to this problem, the Langley engineers narrowed the field of ideas to five. They then built working models of these five container designs, and 12-foot-diameter models of the satellite for simulation studies. With help from Langley's Engineering Service and Mechanical Service divisions, the Echo group built a special 41-foot-diameter spherical vacuum chamber equipped with pressure-proof windows. There the dynamics of opening the container and inflating the satelloon could be studies as the satelloon fell to the bottom of the tank.' 'The container-opening mechanism that eventually resulted from these vacuum tests was surely one of the oddest explosive devices ever contrived. The container was a sphere that opened at its equator into top and bottom hemispheres. the top half fit on the bottom half much like a lid fits snugly atop a kitchen pot. The joint between the two hemispheres, therefore, formed a sliding valve. The halves had to move apart an inch or two before the canister was actually open. It was in this joint between the hemispheres that the charge was placed.' The whole whole system was laced together with fishing line which resulted in many disdainful comments from visiting scientists and engineers but the system worked. Published in James R. Hansen, Spaceflight Revolution: NASA Langley Research Center From Sputnik to Apollo, (Washington: NASA, 1995), p. 180.

  19. Explosion containment device

    DOEpatents

    Benedick, William B.; Daniel, Charles J.

    1977-01-01

    The disclosure relates to an explosives storage container for absorbing and containing the blast, fragments and detonation products from a possible detonation of a contained explosive. The container comprises a layer of distended material having sufficient thickness to convert a portion of the kinetic energy of the explosion into thermal energy therein. A continuous wall of steel sufficiently thick to absorb most of the remaining kinetic energy by stretching and expanding, thereby reducing the momentum of detonation products and high velocity fragments, surrounds the layer of distended material. A crushable layer surrounds the continuous steel wall and accommodates the stretching and expanding thereof, transmitting a moderate load to the outer enclosure. These layers reduce the forces of the explosion and the momentum of the products thereof to zero. The outer enclosure comprises a continuous pressure wall enclosing all of the layers. In one embodiment, detonation of the contained explosive causes the outer enclosure to expand which indicates to a visual observer that a detonation has occurred.

  20. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamine, containing phenylethvnvl groups and various ratios of phthalic anhydride and 4-phenylethynviphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pvrrolidinone to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  1. Advanced Containment System

    DOEpatents

    Kostelnik, Kevin M.; Kawamura, Hideki; Richardson, John G.; Noda, Masaru

    2004-10-12

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  2. Advanced Containment System

    DOEpatents

    Kostelnik, Kevin M.; Kawamura, Hideki; Richardson, John G.; Noda, Masaru

    2005-05-24

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  3. Silicone-containing composition

    DOEpatents

    Mohamed, Mustafa

    2012-01-24

    A silicone-containing composition comprises the reaction product of a first component and an excess of an isocyanate component relative to the first component to form an isocyanated intermediary. The first component is selected from one of a polysiloxane and a silicone resin. The first component includes a carbon-bonded functional group selected from one of a hydroxyl group and an amine group. The isocyanate component is reactive with the carbon-bonded functional group of the first component. The isocyanated intermediary includes a plurality of isocyanate functional groups. The silicone-containing composition comprises the further reaction product of a second component, which is selected from the other of the polysiloxane and the silicone resin. The second component includes a plurality of carbon-bonded functional groups reactive with the isocyanate functional groups of the isocyanated intermediary for preparing the silicone-containing composition.

  4. Container for hydrogen isotopes

    DOEpatents

    Solomon, David E.

    1977-01-01

    A container for the storage, shipping and dispensing of hydrogen isotopes such as hydrogen, deuterium, tritium, or mixtures of the same which has compactness, which is safe against fracture or accident, and which is reusable. The container consists of an outer housing with suitable inlet and outlet openings and electrical feed elements, the housing containing an activated sorber material in the form, for example, of titanium sponge or an activated zirconium aluminate cartridge. The gas to be stored is introduced into the chamber under conditions of heat and vacuum and will be retained in the sorber material. Subsequently, it may be released by heating the unit to drive off the stored gas at desired rates.

  5. Phenylethynyl Containing Reactive Additives

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    2002-01-01

    Phenylethynyl containing reactive additives were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynylphthalic anhydride in glacial acetic acid to form the imide in one step or in N-methyl-2-pyrrolidi none to form the amide acid intermediate. The reactive additives were mixed in various amounts (10% to 90%) with oligomers containing either terminal or pendent phenylethynyl groups (or both) to reduce the melt viscosity and thereby enhance processability. Upon thermal cure, the additives react and become chemically incorporated into the matrix and effect an increase in crosslink density relative to that of the host resin. This resultant increase in crosslink density has advantageous consequences on the cured resin properties such as higher glass transition temperature and higher modulus as compared to that of the host resin.

  6. Material containment enclosure

    DOEpatents

    Carlson, David O.

    1993-01-01

    An isolation enclosure and a group of isolation enclosures useful when a relatively large containment area is required. The enclosure is in the form of a ring having a section removed so that a technician may enter the center area of the ring. In a preferred embodiment, an access zone is located in the transparent wall of the enclosure and extends around the inner perimeter of the ring so that a technician can insert his hands into the enclosure to reach any point within. The inventive enclosures provide more containment area per unit area of floor space than conventional material isolation enclosures.

  7. Westinghouse radiological containment guide

    SciTech Connect

    Aitken, S.B.; Brown, R.L.; Cantrell, J.R.; Wilcox, D.P.

    1994-03-01

    This document provides uniform guidance for Westinghouse contractors on the implementation of radiological containments. This document reflects standard industry practices and is provided as a guide. The guidance presented herein is consistent with the requirements of the DOE Radiological Control Manual (DOE N 5480.6). This guidance should further serve to enable and encourage the use of containments for contamination control and to accomplish the following: Minimize personnel contamination; Prevent the spread of contamination; Minimize the required use of protective clothing and personal protective equipment; Minimize the generation of waste.

  8. PANAMINT: Containment data report

    SciTech Connect

    Hudson, B.; Stubbs, T.; Heinle, R.

    1995-03-01

    The PANAMINT event was detonated in hole U2gb of the Nevada Test Site at 13:59 PDT on May 21, 1986. This paper contains a discussion of that event, with special attention given to the instrumentation designed to monitor stemming emplacement and performance. Data from those instruments are presented.

  9. FRISCO containment data report

    SciTech Connect

    Stubbs, T.; Heinle, R.

    1996-03-01

    This document is the containment data report for the Frisco Event. This event was detonated in hole U8m of the Nevada Test Site on September 23, 1982. Discussion of the instrumentation and stemming is included, as is stemming performance (radiation and pressure, motion, and collapse).

  10. ISLAY containment data report

    SciTech Connect

    Stubbs, T.; Heinle, R.

    1997-06-01

    This containment data report for the ISLAY event provides a description of the event, including the site, emplacement, and instrumentation. Stemming performance is reported, including radiation pressure and motion. Collapse phenomena are reported, including motion and radiation pressure. Measurements on the emplacement pipe are reported, including motion, pressure, temperature, and radiation.

  11. Polyazomethines containing trifluoromethylbenzene units

    NASA Technical Reports Server (NTRS)

    Bryant, Robert G. (Inventor)

    1996-01-01

    Soluble, amorphous, aromatic polyazomethine polymers and copolymers were prepared by reacting a dialdehyde monomer with a diamine monomer containing trifluoromethylbenzene and various combinations thereof in a solvent, such as N,N-dimethylacetamide. The reaction was heated to reflux yielding a polyazomethine which, after cooling to room temperature, was precipitated. These polymers and copolymers may be used to make films, coatings, composites and adhesives.

  12. Polyazomethines containing trifluoromethylbenzene units

    NASA Technical Reports Server (NTRS)

    Bryant, Robert G. (Inventor)

    1995-01-01

    Soluble, amorphous, aromatic polyazomethine polymers and copolymers were prepared by reacting a dialdehyde monomer with a diamine monomer containing trifluoromethylbenzene and various combinations thereof in a solvent, such as N,N-dimethylacetamide. The reaction was heated to reflux yielding a polyazomethine which, after cooling to room temperature, was precipitated. These polymers and copolymers may be used to make films, coatings, composites and adhesives.

  13. Herbs Indoors. Container Gardening.

    ERIC Educational Resources Information Center

    Hatch, Duane

    This package consists of two bilingual instructional booklets for use in helping Indochinese refugees learn basic gardening skills. Included in the package are Cambodian, Vietnamese, and English translations of instructions for raising herbs indoors and Cambodian and English translations of guidelines for container gardening. The herb booklet…

  14. Crash resistant container

    DOEpatents

    Pierce, Jim D.

    1994-01-01

    A container for hazardous materials capable of protecting the enclosed materials from high speed impact. Energy absorption is provided by a multiplicity of crushable layers of either wire mesh or perforated metal sheets which thin and flow together under impact loading. Layers of a higher tensile strength material are interspersed within the crushable layers to confine them and increase performance.

  15. Crash resistant container

    DOEpatents

    Pierce, J.D.

    1994-08-16

    A container for hazardous materials capable of protecting the enclosed materials from high speed impact is disclosed. Energy absorption is provided by a multiplicity of crushable layers of either wire mesh or perforated metal sheets which thin and flow together under impact loading. Layers of a higher tensile strength material are interspersed within the crushable layers to confine them and increase performance. 1 fig.

  16. JARLSBERG: Containment data report

    SciTech Connect

    Hudson, B.; Stubbs, T.; Heinle, R.

    1994-12-01

    Information on the JARLSBERG event at the Nevada Test Site is given. Emphasis is on stemming performance, surface motion, and satellite hole (free-field) measurements. Some of the instrumentation was rendered inoperative by a preshot lightning strike on the grounding system and the EMP. The containment was satisfactory.

  17. WASTE CONTAINMENT OVERVIEW

    EPA Science Inventory

    BSE waste is derived from diseased animals such as BSE (bovine spongiform encepilopothy, also known as Mad Cow) in cattle and CWD (chronic wasting disease) in deer and elk. Landfilling is examined as a disposal option and this presentation introduces waste containment technology...

  18. BWR steel containment corrosion

    SciTech Connect

    Tan, C.P.; Bagchi, G.

    1996-04-01

    The report describes regulatory actions taken after corrosion was discovered in the drywell at the Oyster Creek Plant and in the torus at the Nine Mile Point 1 Plant. The report describes the causes of corrosion, requirements for monitoring corrosion, and measures to mitigate the corrosive environment for the two plants. The report describes the issuances of generic letters and information notices either to collect information to determine whether the problem is generic or to alert the licensees of similar plants about the existence of such a problem. Implementation of measures to enhance the containment performance under severe accident conditions is discussed. A study by Brookhaven National Laboratory (BNL) of the performance of a degraded containment under severe accident conditions is summarized. The details of the BNL study are in the appendix to the report.

  19. Polymer composites containing nanotubes

    NASA Technical Reports Server (NTRS)

    Bley, Richard A. (Inventor)

    2008-01-01

    The present invention relates to polymer composite materials containing carbon nanotubes, particularly to those containing singled-walled nanotubes. The invention provides a polymer composite comprising one or more base polymers, one or more functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers and carbon nanotubes. The invention also relates to functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers, particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having side chain functionalization, and more particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having olefin side chains and alkyl epoxy side chains. The invention further relates to methods of making polymer composites comprising carbon nanotubes.

  20. Melt containment member

    SciTech Connect

    Rieken, Joel R.; Heidloff, Andrew J.

    2014-09-09

    A tubular melt containment member for transient containment of molten metals and alloys, especially reactive metals and alloys, includes a melt-contacting layer or region that comprises an oxygen-deficient rare earth oxide material that is less reactive as compared to the counterpart stoichiometric rare earth oxide. The oxygen-deficient (sub-stoichiometric) rare earth oxide can comprise oxygen-deficient yttria represented by Y.sub.2O.sub.3-x wherein x is from 0.01 to 0.1. Use of the oxygen-deficient rare earth oxide as the melt-contacting layer or region material reduces reaction with the melt for a given melt temperature and melt contact time.

  1. BWR zero pressure containment

    SciTech Connect

    Dillmann, C.W.; Townsend, H.E.; Nesbitt, L.B.

    1992-02-25

    This patent describes the operation of a nuclear reactor system, the system including a containment defining a drywall space wherein a nuclear reactor is disposed, there being a suppression pool in the containment with the suppression pool having a wetwell space above a level of the pool to which an non-condensable gases entering the suppression pool can vent. It comprises: continuously exhausting the wetwell space to remove gas mixture therefrom while admitting inflow of air from an atmospheric source thereof to the wetwell during normal operation by blocking off the inflow during a loss-of-coolant-accident whenever a pressure in the wetwell space is above a predetermined value, and subjecting the gas subsequent to its removal from the wetwell to a treatment operation to separate any particulate material entrained therein from the gas mixture.

  2. Concrete containment aging study

    SciTech Connect

    Pachner, J.; Tai, T.M.; Naus, D.

    1994-04-01

    In 1989, IAEA initiated a pilot study on the management of aging of nuclear power plant components. The Phase I and II studies of concrete containment are discussed. With the data base, plant owners will be able to review and enhance their existing programs. IAEA will analyze data provided by participating plants and the report is scheduled to be released by late 1994 (final report release mid-1995).

  3. Hydrogen storage container

    DOEpatents

    Wang, Jy-An John; Feng, Zhili; Zhang, Wei

    2017-02-07

    An apparatus and system is described for storing high-pressure fluids such as hydrogen. An inner tank and pre-stressed concrete pressure vessel share the structural and/or pressure load on the inner tank. The system and apparatus provide a high performance and low cost container while mitigating hydrogen embrittlement of the metal tank. System is useful for distributing hydrogen to a power grid or to a vehicle refueling station.

  4. Plastic container bagless transfer

    DOEpatents

    Tibrea, Steven L.; D'Amelio, Joseph A.; Daugherty, Brent A.

    2003-11-18

    A process and apparatus are provided for transferring material from an isolated environment into a storage carrier through a conduit that can be sealed with a plug. The plug and conduit can then be severed to provide a hermetically sealed storage carrier containing the material which may be transported for storage or disposal and to maintain a seal between the isolated environment and the ambient environment.

  5. Fluorine-containing polyformals

    NASA Technical Reports Server (NTRS)

    Trischler, F. D. (Inventor)

    1968-01-01

    A fluorine-containing polymeric polyformals is described which has the repeating unit O CH2 O CH2 (CF2) sub n CH2 wherein n is an integer of from about 3 to about 6 prepared by reacting trioxane with a diol having the formula HO CH2 (CF2) sub n CH2 OH. These polymeric polyformals are useful directly for impervious coatings on metals and the like.

  6. CORNUCOPIA containment data report

    SciTech Connect

    Hudson, B.; Stubbs, T.; Heinle, R.

    1995-03-01

    The CORNUCOPIA event was detonated on July 24, 1986. A crater resulted from the event that was 137.5 m in diameter and a maximum depth of 16.9 m. No radiation was detected above the ground surface and containment was satisfactory. This report describes measuring methods utilized, maps indicating the location of the event, and a discussion, with data, concerning the collapse progression.

  7. ARMADA containment data report

    SciTech Connect

    Stubbs, T.; Heinle, R.

    1996-04-01

    ARMADA was detonated in hole U9cs of Nevada Test Site. Depth of burial was 265 m in the Paintbrush Tuff of area 9, about 400 m above the Paleozoic formation and 310 m above the standing water level. Detonation time was 05:53 PDT on April 22, 1983, and collapse progressed to the surface at about 0.4 hour after detonation. Resulting crater had a mean radius of 72.9 m and a max depth of 7.7 m. No radiation arrivals were detected above ground and the ARMADA containment was considered successful.

  8. Buckminsterfullerene-containing microemulsions

    SciTech Connect

    Zhang, W.; Honeychuck, R.V.; Hussam, A.

    1996-03-06

    We have shown that C{sub 60}-containing microemulsions can be readily prepared. This opens up the possibility of studying C{sub 60} molecules in a medium which has significant practical applications. One of the most intriguing aspects of this work is the revelation of a local C{sub 60} environment, inside the micelles, which is largely aromatic and weakly polar. This shows that van der Waals interactions between a fullerene molecule and the aromatic {pi} cloud of the solvent molecules are important in bringing the solute into solution in a largely aliphatic micellar interior. 23 refs., 1 fig.

  9. Confinement Contains Condensates

    SciTech Connect

    Brodsky, Stanley J.; Roberts, Craig D.; Shrock, Robert; Tandy, Peter C.

    2012-03-12

    Dynamical chiral symmetry breaking and its connection to the generation of hadron masses has historically been viewed as a vacuum phenomenon. We argue that confinement makes such a position untenable. If quark-hadron duality is a reality in QCD, then condensates, those quantities that have commonly been viewed as constant empirical mass-scales that fill all spacetime, are instead wholly contained within hadrons; i.e., they are a property of hadrons themselves and expressed, e.g., in their Bethe-Salpeter or light-front wave functions. We explain that this paradigm is consistent with empirical evidence, and incidentally expose misconceptions in a recent Comment.

  10. Intrauterine devices containing progesterone.

    PubMed

    Murad, F

    1977-05-01

    Characteristics of progesterone-releasing IUDs are reported. At present, the only progesterone-containing IUD on the market is Progestasert, a T-shaped ethylene vinyl acetate copolymer device containing 38 mg progesterone in silicone. The device releases approximately 65 mcg/day into the uterine cavity over the course of 1-year. The device does not alter pituitary function or ovulation, nor does it depend on a local mechanical effect. Rather, it may exert its effect by inhibiting sperm capacitation or survival, or it may prevent nidation by alterning the endometrium. The reported pregnancy rate for Progestasert is 1.9% in parous women and 2.5% in nulliparous women. This efficacy rate is similar to that for other IUDs and low-dose progestin-only oral contraceptives. Breakthrough bleeding is the most common side effect, and perhaps 10-15% of the acceptors will have the device removed for either bleeding, pain, or infection. The rate of spontaneous expulsion of the device is about 3-8%. It is recommended that the device be inserted during or shortly after the menstrual period.

  11. FUEL CONTAINER CLOSURE

    DOEpatents

    Stone, C.C.; Noland, R.A.

    1962-07-17

    A method of producing a spherical closed end on a small thin-walled tube forming a container for reactor fuel is described. An end cap inserted in the tube has a long slender external projection extending axially of the tube. A heavy electrical current is applied to the projection, and simultaneously a portion of the tube very near the end cap is chilled. A part of the projection is vaporized, and the balance is melted, along with portions of the end cap and the tube. As a result, the end cap is welded to the tube, and the projection in melting is spread out to form a spherical surface on the end cap. (AEC)

  12. NORMANNA containment data report

    SciTech Connect

    Hudson, B.; Stubbs, T.; Heinle, R.

    1995-03-01

    The second in a series of three similar experiments, NORMANNA was located in hole U10cb in area 10 of the Nevada Test Site (NTS). The first experiment of this series (JARLSBERG) was conducted about one year earlier. The diameter of the emplacement hole was 2.18 m and the depth-of-burial of 203 m placed the working point in alluvium about 100 m above the Paleozoic contact and nearly 300 m above the static water level. NORMANNA was detonated on July 12, 1984 at 07:00 PDT. All phenomena appeared normal with a chimney collapse to the ground surface about 7 minutes later. The mean radius of the resulting crater was 54.1 m and its maximum depth was 8.8 m. No radiation arrivals were detected above ground and containment was satisfactory.

  13. HAVARTI containment data report

    SciTech Connect

    Stubbs, T.; Heinle, R.

    1997-06-01

    The HAVARTI event was detonated in hole U10bg of the Nevada Test Site. The HAVARTI device had a depth-of-burial of 200 m in the Tunnel Bed tuffs of area 10, about 280 m above the Paleozoic formation and 330 m above the standing water level. Stemming of the 2.44 m diameter emplacement hole is described. A log of the stemming operations was maintained by Holmes & Narver). Detonation time was 06:41 PDT on August 5 1981. At a depth of 149 m there was an indication of subsurface collapse occurring 1780 s after detonation. No radiation arrivals were detected above ground and the HAVARTI containment was considered successful.

  14. CABRA containment data report

    SciTech Connect

    Stubbs, T.; Heinle, T.

    1996-03-01

    The CABRA event was detonated in hole U20aj of the Nevada Test Site as indicated in figure 1.1. The CABRA device had a depth-of-burial (DOB) of 542 m in the Tuffs and rhyolites of area 20, about 20 m above the standing water level, as shown in figure 1.2(l). Figure 1.3 is a plan map of the immediate Vicinity of hole U20aj showing the drill holes used in the construction of the cross section plot of figure 1.2. Stemming of the 2.44 m diameter emplacement hole followed the plan shown in figure 1.4. A log of the stemming operations was maintained by Holmes & Narver. Detonation time was 12:20 PST on March 26,1983, and a sub-surface collapse to a depth of 380 m was observed. No radiation arrivals were detected above ground and the CABRA containment was considered successful.

  15. Organic containment separator

    DOEpatents

    Del Mar, Peter

    1995-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  16. Gestodene-containing contraceptives.

    PubMed

    Kuhl, H; Jung-Hoffmann, C; Wiegratz, I

    1995-12-01

    As GSD is the most potent progestogen used in oral contraceptives, the doses of GSD can be lower than those of other progestogen components. The monophasic (30 micrograms EE + 75 micrograms GSD) and the triphasic formulation (30 micrograms EE + 50 micrograms GSD/40 micrograms EE + 70 micrograms GSD/30 micrograms EE + 100 micrograms GSD) suppress gonadotropin release and ovarian function profoundly and inhibit ovulation reliably. The strong anti-estrogenic and progestogenic effectiveness of GSD is based on the high GSD serum concentrations achieved during daily intake. Because of the weak androgenic properties of GSD, both formulations can be characterized as estrogen-dominant with respect to their hepatic effects. Except for the first cycles, both formulations afford good cycle control, and the rate of side effects is similar to that with comparable low-dose oral contraceptives. The levels of total and free androgens and androgen precursors, as well as of peripheral androgen activity, are significantly reduced, resulting in a reduced incidence of acne. The concentrations of SHBG and other serum-binding globulins are elevated considerably, and thyroid function is almost unaffected. The estrogen-dominant effect on hepatic metabolism of both formulations also is reflected by a significant increase in the levels of triglycerides and VLDL, HDL, and some apolipoproteins, while LDL-CH and total CH remain unchanged. Similar to other low-dose oral contraceptives, the GSD-containing preparations cause a slight impairment of glucose tolerance that does not appear to be of clinical relevance. However, a significant increase exists in pro-coagulatory and fibrinolytic activity that leads to a considerable stimulation of fibrin turnover. In predisposed women, this may contribute to an elevated risk of venous and arterial thromboembolic diseases.

  17. VILLE containment data report

    SciTech Connect

    Stubbs, T.; Heinle, R.

    1995-03-01

    The VILLE event was detonated in hole U4am of the Nevada Test Site as indicated in Fig. 1.1. A plan view map of the local region around hole U4am indicating the inferred faults and drill holes is shown in figure 1.2. The device had a depth-of-burial of 293 m in the alluvium of Area 4, about 240 m above the standing water level (SWL), as shown in Figure 1.3. Stemming of the 2.44 m diameter emplacement hole followed the plan shown in Fig. 1.4. A log of the stemming operations was maintained by Holmes and Narver. Detonation time was 08:15 PDT on June 13, 1985 and about 28 minutes later the chimney collapsed to the surface leaving a crater with a mean radius of 59.7 m and a maximum depth of 17.3 m. No radiation arrivals were detected in the emplacement hole and the VILLE containment was considered successful. Three of the five stemming plugs (the first, fourth and fifth) were composed of coarse gypsum aggregate in a gypsum cement slurry. Each of these three gypsum-filled-aggregate (GFA) plugs was monitored during emplacement with arrays of conductivity probes and thermistors. The remaining two plugs were soft, coal tar aggregate (CT/A) gas seal membranes having a thickness of about 1.5 m sandwiched between layers of fines material. A layer of CT/A was poured on the top of each of the top two GFA plugs.

  18. Prenatal Experiences of Containment in the Light of Bion's Model of Container/Contained

    ERIC Educational Resources Information Center

    Maiello, Suzanne

    2012-01-01

    This paper explores the idea of possible proto-experiences of the prenatal child in the context of Bion's model of container/contained. The physical configuration of the embryo/foetus contained in the maternal uterus represents the starting point for an enquiry into the unborn child's possible experiences of its state of being contained in a…

  19. A Snapshot of the EPA Pesticide Container and Containment Rule

    EPA Pesticide Factsheets

    This brochure provides an overview of the EPA pesticide container and containment rule for registrants, retailers, distributors, commercial applicators, custom blenders and pesticide users It describes who must comply and provides requirement information.

  20. CONTAINER MATERIALS, FABRICATION AND ROBUSTNESS

    SciTech Connect

    Dunn, K.; Louthan, M.; Rawls, G.; Sindelar, R.; Zapp, P.; Mcclard, J.

    2009-11-10

    The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised.

  1. Direct containment heating models in the CONTAIN code

    SciTech Connect

    Washington, K.E.; Williams, D.C.

    1995-08-01

    The potential exists in a nuclear reactor core melt severe accident for molten core debris to be dispersed under high pressure into the containment building. If this occurs, the set of phenomena that result in the transfer of energy to the containment atmosphere and its surroundings is referred to as direct containment heating (DCH). Because of the potential for DCH to lead to early containment failure, the U.S. Nuclear Regulatory Commission (USNRC) has sponsored an extensive research program consisting of experimental, analytical, and risk integration components. An important element of the analytical research has been the development and assessment of direct containment heating models in the CONTAIN code. This report documents the DCH models in the CONTAIN code. DCH models in CONTAIN for representing debris transport, trapping, chemical reactions, and heat transfer from debris to the containment atmosphere and surroundings are described. The descriptions include the governing equations and input instructions in CONTAIN unique to performing DCH calculations. Modifications made to the combustion models in CONTAIN for representing the combustion of DCH-produced and pre-existing hydrogen under DCH conditions are also described. Input table options for representing the discharge of debris from the RPV and the entrainment phase of the DCH process are also described. A sample calculation is presented to demonstrate the functionality of the models. The results show that reasonable behavior is obtained when the models are used to predict the sixth Zion geometry integral effects test at 1/10th scale.

  2. Conductive Container for Semiconductor Devices

    NASA Technical Reports Server (NTRS)

    Rice, J. T.

    1986-01-01

    Container for semiconductor components not only protects them against mechanical damage but ensures they are not harmed by electrostatic discharges. Container holds components in fixed positions so they can be serialized and identified from their locations. Suitable for holding components during both storing and shipping. Originally developed for microwave diodes, container concept readily adaptable to transistors and integrated circuits.

  3. Global Container Management Process Improvements

    DTIC Science & Technology

    2015-06-19

    GLOBAL CONTAINER MANAGEMENT PROCESS IMPROVEMENTS GRP Traci L. Bowman, Major, USAF AFIT-ENS-GRP-15...020 GLOBAL CONTAINER MANAGEMENT PROCESS IMPROVEMENTS GRP Presented to the Faculty Department of Operational Sciences Graduate...STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. AFIT-ENS-GRP-15-J-020 GLOBAL CONTAINER MANAGEMENT PROCESS

  4. Pressure sensor for sealed containers

    DOEpatents

    Hodges, Franklin R.

    2001-01-01

    A magnetic pressure sensor for sensing a pressure change inside a sealed container. The sensor includes a sealed deformable vessel having a first end attachable to an interior surface of the sealed container, and a second end. A magnet mounted to the vessel second end defining a distance away from the container surface provides an externally detectable magnetic field. A pressure change inside the sealed container causes deformation of the vessel changing the distance of the magnet away from the container surface, and thus the detectable intensity of the magnetic field.

  5. METHOD OF TESTING HERMETIC CONTAINERS

    DOEpatents

    Borst, L.B.

    1959-02-17

    A method is presented for testing hermetic containers enclosing a material capable of chemically combining with a fluid at elevated temperatures. In accordance with the invention, the container to be tested is weighed together with the material therein. The container and its contents are then immersed in the fluid and heated to a temperature sufficiently high to cause a reaction to take place between the contents and the fluid and maintained under such conditions for a definite period of time. The container and its contents are then cooled and re-weighed. The rate of change in weight is determined and utilized as an index to determine the possibility of container failure.

  6. RESIDUAL STRESSES IN 3013 CONTAINERS

    SciTech Connect

    Mickalonis, J.; Dunn, K.

    2009-11-10

    The DOE Complex is packaging plutonium-bearing materials for storage and eventual disposition or disposal. The materials are handled according to the DOE-STD-3013 which outlines general requirements for stabilization, packaging and long-term storage. The storage vessels for the plutonium-bearing materials are termed 3013 containers. Stress corrosion cracking has been identified as a potential container degradation mode and this work determined that the residual stresses in the containers are sufficient to support such cracking. Sections of the 3013 outer, inner, and convenience containers, in both the as-fabricated condition and the closure welded condition, were evaluated per ASTM standard G-36. The standard requires exposure to a boiling magnesium chloride solution, which is an aggressive testing solution. Tests in a less aggressive 40% calcium chloride solution were also conducted. These tests were used to reveal the relative stress corrosion cracking susceptibility of the as fabricated 3013 containers. Significant cracking was observed in all containers in areas near welds and transitions in the container diameter. Stress corrosion cracks developed in both the lid and the body of gas tungsten arc welded and laser closure welded containers. The development of stress corrosion cracks in the as-fabricated and in the closure welded container samples demonstrates that the residual stresses in the 3013 containers are sufficient to support stress corrosion cracking if the environmental conditions inside the containers do not preclude the cracking process.

  7. Polyimides containing pendent siloxane groups

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); St.clair, Terry L. (Inventor); Hergenrother, Paul M. (Inventor)

    1994-01-01

    Novel polyimides containing pendent siloxane groups (PISOX) were prepared by the reaction of functionalized siloxane compounds with hydroxy containing polyimides (PIOH). The pendent siloxane groups on the polyimide backbone offer distinct advantages such as lowering the dielectric constant and moisture resistance and enhanced atomic oxygen resistance. The siloxane containing polyimides are potentially useful as protective silicon oxide coatings and are useful for a variety of applications where atomic oxygen resistance is needed.

  8. Leak test adapter for containers

    DOEpatents

    Hallett, Brian H.; Hartley, Michael S.

    1996-01-01

    An adapter is provided for facilitating the charging of containers and leak testing penetration areas. The adapter comprises an adapter body and stem which are secured to the container's penetration areas. The container is then pressurized with a tracer gas. Manipulating the adapter stem installs a penetration plug allowing the adapter to be removed and the penetration to be leak tested with a mass spectrometer. Additionally, a method is provided for using the adapter.

  9. SHIPPING CONTAINER FOR RADIOACTIVE MATERIAL

    DOEpatents

    Nachbar, H.D.; Biggs, B.B.; Tariello, P.J.; George, K.O.

    1963-01-15

    A shipping container is described for transponting a large number of radioactive nuclear fuel element modules which produce a substantial amount of heat. The container comprises a primary pressure vessel and shield, and a rotatable head having an access port that can be indexed with module holders in the container. In order to remove heat generated in the fuel eleme nts, a heat exchanger is arranged within the container and in contact with a heat exchange fluid therein. The heat exchanger communicates with additional external heat exchangers, which dissipate heat to the atmosphere. (AEC)

  10. Plasmids as Tools for Containment.

    PubMed

    García, José L; Díaz, Eduardo

    2014-10-01

    Active containment systems are a major tool for reducing the uncertainty associated with the introduction of monocultures, genetically engineered or not, into target habitats for a large number of biotechnological applications (e.g., bioremediation, bioleaching, biopesticides, biofuels, biotransformations, live vaccines, etc.). While biological containment reduces the survival of the introduced organism outside the target habitat and/or upon completion of the projected task, gene containment strategies reduce the lateral spread of the key genetic determinants to indigenous microorganisms. In fundamental research, suicide circuits become relevant tools to address the role of gene transfer, mainly plasmid transfer, in evolution and how this transfer contributes to genome plasticity and to the rapid adaptation of microbial communities to environmental changes. Many lethal functions and regulatory circuits have been used and combined to design efficient containment systems. As many new genomes are being sequenced, novel lethal genes and regulatory elements are available, e.g., new toxin-antitoxin modules, and they could be used to increase further the current containment efficiencies and to expand containment to other organisms. Although the current containment systems can increase the predictability of genetically modified organisms in the environment, containment will never be absolute, due to the existence of mutations that lead to the appearance of surviving subpopulations. In this sense, orthogonal systems (xenobiology) appear to be the solution for setting a functional genetic firewall that will allow absolute containment of recombinant organisms.

  11. Rapid Sampling from Sealed Containers

    SciTech Connect

    Johnston, R.G.; Garcia, A.R.E.; Martinez, R.K.; Baca, E.T.

    1999-02-28

    The authors have developed several different types of tools for sampling from sealed containers. These tools allow the user to rapidly drill into a closed container, extract a sample of its contents (gas, liquid, or free-flowing powder), and permanently reseal the point of entry. This is accomplished without exposing the user or the environment to the container contents, even while drilling. The entire process is completed in less than 15 seconds for a 55 gallon drum. Almost any kind of container can be sampled (regardless of the materials) with wall thicknesses up to 1.3 cm and internal pressures up to 8 atm. Samples can be taken from the top, sides, or bottom of a container. The sampling tools are inexpensive, small, and easy to use. They work with any battery-powered hand drill. This allows considerable safety, speed, flexibility, and maneuverability. The tools also permit the user to rapidly attach plumbing, a pressure relief valve, alarms, or other instrumentation to a container. Possible applications include drum venting, liquid transfer, container flushing, waste characterization, monitoring, sampling for archival or quality control purposes, emergency sampling by rapid response teams, counter-terrorism, non-proliferation and treaty verification, and use by law enforcement personnel during drug or environmental raids.

  12. Shipping Containers as Structural Systems.

    DTIC Science & Technology

    1977-07-01

    0(’I Tec h nical N1,iiiutor t u l this study was Nit. R. II. Barnard . CDL J. F. iLu~ is Commander and [)irector of CERL. and Dr. I . R. Shaffer is...Technology Transfer 2 ANAL YTICAL STUDIES 8 Finite Element Model for Sing le Container Matrix Reduction for Single Container Box Beam Roof System 3 LABORATORY... Studies Test Results 4 FIELD TESTS 11 Construct ion Techniques Loading Procedures Endurance Tests Test Results 5 DEDICATED CONTAINERS 13 Containerized

  13. Seal device for ferromagnetic containers

    DOEpatents

    Meyer, Ross E.; Jason, Andrew J.

    1994-01-01

    A temporary seal or patch assembly prevents the escape of contents, e.g., fluids and the like, from within a container having a breach therethrough until the contents can be removed and/or a repair effected. A frame that supports a sealing bladder can be positioned over the breach and the frame is then attached to the container surface, which must be of a ferromagnet material, by using switchable permanent magnets. The permanent magnets are designed to have a first condition that is not attracted to the ferromagnetic surface and a second conditions whereby the magnets are attracted to the surface with sufficient force to support the seal assembly on the surface. Latching devices may be attached to the frame and engage the container surface with hardened pins to prevent the lateral movement of the seal assembly along the container surface from external forces such as fluid drag or gravity.

  14. Seal device for ferromagnetic containers

    DOEpatents

    Meyer, R.E.; Jason, A.J.

    1994-10-18

    A temporary seal or patch assembly prevents the escape of contents, e.g., fluids and the like, from within a container having a breach there through until the contents can be removed and/or a repair effected. A frame that supports a sealing bladder can be positioned over the breach and the frame is then attached to the container surface, which must be of a ferromagnet material, by using switchable permanent magnets. The permanent magnets are designed to have a first condition that is not attracted to the ferromagnetic surface and a second conditions whereby the magnets are attracted to the surface with sufficient force to support the seal assembly on the surface. Latching devices may be attached to the frame and engage the container surface with hardened pins to prevent the lateral movement of the seal assembly along the container surface from external forces such as fluid drag or gravity. 10 figs.

  15. VEGETATIVE COVERS FOR WASTE CONTAINMENT

    EPA Science Inventory

    Disposal of municipal ahd hazardous waste in the United States is primarily accomplished by containment in lined and capped landfills. Evapotranspiration cover systems offer an alternative to conventional landfill cap systems. These covers work on completely different principles ...

  16. LIQUID METAL COMPOSITIONS CONTAINING URANIUM

    DOEpatents

    Teitel, R.J.

    1959-04-21

    Liquid metal compositions containing a solid uranium compound dispersed therein is described. Uranium combines with tin to form the intermetallic compound USn/sub 3/. It has been found that this compound may be incorporated into a liquid bath containing bismuth and lead-bismuth components, if a relatively small percentage of tin is also included in the bath. The composition has a low thermal neutron cross section which makes it suitable for use in a liquid metal fueled nuclear reactor.

  17. Building a secondary containment system

    SciTech Connect

    Broder, M.F.

    1994-10-01

    Retail fertilizer and pesticide dealers across the United States are installing secondary containment at their facilities or are seriously considering it. Much of this work is in response to new state regulations; however, many dealers not facing new regulations are upgrading their facilities to reduce their liability, lower their insurance costs, or comply with anticipated regulations. The Tennessee Valley Authority`s (TVA) National Fertilizer and Environmental Research Center (NFERC) has assisted dealers in 22 states in retrofitting containment to their facilities. Simultaneous improvements in the operational efficiency of the facilities have been achieved at many of the sites. This paper is based on experience gained in that work and details the rationale used in planning secondary containment and facility modifications.

  18. Waste product profile: Glass containers

    SciTech Connect

    Miller, C.

    1995-09-01

    In 1992, Waste Age initiated the Waste Product Profile series -- brief, factual listings of the solid waste management characteristics of materials in the solid waste stream. This popular series of profiles high-lighted a product, explained how it fit into integrated waste management systems, and provided current data on recycling and markets for the product. Glass containers are made from sand, limestone, soda ash, cullet (crushed bottles), and various additives, including those used to produce green, brown, and blue glass. Other glass products include flat glass, such as windows, and fiberglass products, such as insulation and glassware. These products are manufactured using different processes and different additives than container glass. This profile covers only glass containers.

  19. TERNARY ALLOY-CONTAINING PLUTONIUM

    DOEpatents

    Waber, J.T.

    1960-02-23

    Ternary alloys of uranium and plutonium containing as the third element either molybdenum or zirconium are reported. Such alloys are particularly useful as reactor fuels in fast breeder reactors. The alloy contains from 2 to 25 at.% of molybdenum or zirconium, the balance being a combination of uranium and plutonium in the ratio of from 1 to 9 atoms of uranlum for each atom of plutonium. These alloys are prepared by melting the constituent elements, treating them at an elevated temperature for homogenization, and cooling them to room temperature, the rate of cooling varying with the oomposition and the desired phase structure. The preferred embodiment contains 12 to 25 at.% of molybdenum and is treated by quenching to obtain a body centered cubic crystal structure. The most important advantage of these alloys over prior binary alloys of both plutonium and uranium is the lack of cracking during casting and their ready machinability.

  20. Scintillator materials containing lanthanum fluorides

    DOEpatents

    Moses, William W.

    1991-01-01

    An improved radiation detector containing a crystalline mixture of LaF.sub.3 and CeF.sub.3 as the scintillator element is disclosed. Scintillators made with from 25% to 99.5% LaF.sub.3 and the remainder CeF.sub.3 have been found to provide a balance of good stopping power, high light yield and short decay constant that is equal to or superior to other known scintillator materials, and which may be processed from natural starting materials containing both rare earth elements. The radiation detectors disclosed are favorably suited for use in general purpose detection and in positron emission tomography.

  1. Shipping container for fissile material

    DOEpatents

    Crowder, H.E.

    1984-12-17

    The present invention is directed to a shipping container for the interstate transportation of enriched uranium materials. The shipping container is comprised of a rigid, high-strength, cylindrical-shaped outer vessel lined with thermal insulation. Disposed inside the thermal insulation and spaced apart from the inner walls of the outer vessel is a rigid, high-strength, cylindrical inner vessel impervious to liquid and gaseous substances and having the inner surfaces coated with a layer of cadmium to prevent nuclear criticality. The cadmium is, in turn, lined with a protective shield of high-density urethane for corrosion and wear protection. 2 figs.

  2. Liquid crystalline composites containing phyllosilicates

    DOEpatents

    Chaiko, David J.

    2004-07-13

    The present invention provides phyllosilicate-polymer compositions which are useful as liquid crystalline composites. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while at the same time be transparent. Because of the ordering of the particles liquid crystalline composite, liquid crystalline composites are particularly useful as barriers to gas transport.

  3. Metal-containing lubricant compositions

    SciTech Connect

    Hunt, M.W.; Kennedy, S.

    1987-05-12

    A lubricating oil composition is described comprising: a major amount of a lubricating oil; from 1 to 10 (wt)% of an ashless dispersant compound; or from 0.3 to 10 (wt)% of a nitrogen or ester containing polymeric viscosity index improver dispersant.

  4. Diamines Containing Pendent Phenylethynyl Groups

    NASA Technical Reports Server (NTRS)

    Connell, John W. (Inventor); Smith, Joseph G., Jr. (Inventor); Hergenrother, Paul M. (Inventor)

    1997-01-01

    Controlled molecular weight imide oligomers and co-oligomers containing pendent phenylethynyl groups (PEPIs) and endcapped with nonreactive or phenylethynyl groups have been prepared by the cyclodehydration of the precursor amide acid oligomers or co-oligomers containing pendent phenylethynyl groups and endcapped with nonreactive or phenylethynyl groups. The amine terminated amide acid oligomers or co-oligomers are prepared from the reaction of dianhydride(s) with an excess of diamine(s) and diamine containing pendent phenylethynyl groups and subsequently endcapped with a phenylethynyl phthalic anhydride or monofunctional anhydride. The anhydride terminated amide acid oligomers and co-oligomers are prepared from the reaction of diamine(s) and diamine containing pendent phenylethynyl group(s) with an excess of dianhydride(s) and subsequently endcapped with a phenylethynyl amine or monofunctional amine. The polymerizations are carried out in polar aprotic solvents such as and N,N-dimethylacetamide under nitrogen at room temperature. The amide acid oligomers or co-oligomers are subsequently cyclodehydrated either thermally or chemically to the corresponding imide oligomers. The polymers and copolymers prepared from these materials exhibit a unique and unexpected combination of properties that includes higher glass transition temperatures after curing and higher retention of neat resin, adhesive and carbon fiber reinforced mechanical properties at temperatures up to 204 C under wet conditions without sacrificing melt flow behavior and processability as compared to similar materials. These materials are useful as adhesives, coatings, films, moldings, and composite matrices.

  5. Control And Containment Design Report

    EPA Pesticide Factsheets

    his work plan (571-pages) is called the “SWMU-3-1 and 3-4 Control and Containment Design Report” was written to be in compliance with new FEMA requirements that the design must not create any positive change in the 100 year flood elevation.

  6. Container Soil-Water Reactions.

    ERIC Educational Resources Information Center

    Spomer, L. Art; Hershey, David R.

    1990-01-01

    Presented is an activity that illustrates the relationship between the soil found in containers and soil in the ground including the amount of air and water found in each. Sponges are used to represent soil. Materials, procedures, and probable results are described. (KR)

  7. 27 CFR 30.44 - Weighing containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Weighing containers. 30.44... Weighing containers. (a) Weighing containers of more than 10 wine gallons. The weight of containers having.... (b) Weighing containers of 10 wine gallons or less. The weight for containers of a capacity of...

  8. Liquid crystalline composites containing phyllosilicates

    DOEpatents

    Chaiko; David J.

    2007-05-08

    The present invention provides barrier films having reduced gas permeability for use in packaging and coating applications. The barrier films comprise an anisotropic liquid crystalline composite layer formed from phyllosilicate-polymer compositions. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while remaining transparent. Because of the ordering of the particles in the liquid crystalline composite, barrier films comprising liquid crystalline composites are particularly useful as barriers to gas transport.

  9. Copper-containing zeolite catalysts

    DOEpatents

    Price, Geoffrey L.; Kanazirev, Vladislav

    1996-01-01

    A catalyst useful in the conversion of nitrogen oxides or in the synthesis of nitriles or imines from amines, formed by preparing an intimate mechanical mixture of a copper (II)-containing species, such as CuO or CuCl.sub.2, or elemental copper, with a zeolite having a pore mouth comprising 10 oxygen atoms, such as ZSM-5, converting the elemental copper or copper (II) to copper (I), and driving the copper (I) into the zeolite.

  10. Hybrid Ionosilica containing aromatic groups

    NASA Astrophysics Data System (ADS)

    Thach, U. D.; Prelot, B.; Hesemann, P.

    2015-07-01

    Ionosilicas are defined as mesostructured silica based materials bearing covalently bound ionic groups. These materials, situated at the interface of ionic liquids and structured silica mesophases, are usually synthesized following template directed hydrolysis-polycondensation procedures starting from silylated ionic compounds. Here, we report new ammonium type hybrid ionosilicas containing aromatic groups which can serve as a new platform for the design of functional materials, for applications in the areas of ion exchange reactions, drug delivery or wastewater treatment.

  11. Propelling Charge Container Leak Rate

    DTIC Science & Technology

    1979-08-01

    effective leakage hole size for the total population of 349 containers does not exceed 1.2 mils. L 4 5Based upon the work of Somerville as reported...1977. 4. Paul N. Somerville , Tables for Obtaining Non-rarametric Tolerance Limits, Annals of Mathematical Statistics, Vol 29, Nc,. 2, pp 5991- 601, June...1958. 5. Mary Natrella, "Engineering design Handbook, Experimental Statistics," SEction 5, Tables. US Army Materiel rommand, AMCP 706-114, July 1963

  12. Nonaggregating Microspheres Containing Aldehyde Groups

    NASA Technical Reports Server (NTRS)

    Rembaum, Alan

    1989-01-01

    Cobalt gamma irradiation of hydrophilic monomers in presence of acrolein yields exceptionally-stable, nonaggregating microspheres. Mixtures of 2-hydroxyethyl methacrylate (HEMA) and acrolein form homogeneous solutions in distilled water containing 0.4 percent polyethylene oxide (PEO). After deaeration with nitrogen, mixtures irradiated at room temperature with gamma rays from cobalt source; total exposure time 4 hours, at rate of 0.2 milliroentgen per hour. Reaction product centrifuged three times for purification and kept in distilled water.

  13. A silaproline-containing dipeptide.

    PubMed

    Vivet, B; Cavelier, F; Martinez, J; Didierjean, C; Marraud, M; Aubry, A

    2000-12-01

    The silaproline-containing dipeptide N-(3, 3-dimethyl-1-pivaloyl-1-aza-3-sila-5-cyclopentylcarbonyl)-L- alanine isopropylamide, C(17)H(33)N(3)O(3)Si, has two independent molecules in the asymmetric unit and each adopts a beta-II folded conformation, where the amide on the terminal C interacts intramolecularly with the pivaloyl O atom. The five-membered silaproline ring is C(beta)-puckered, an infrequent conformation for the homologous proline ring.

  14. Copper-containing zeolite catalysts

    DOEpatents

    Price, G.L.; Kanazirev, V.

    1996-12-10

    A catalyst useful in the conversion of nitrogen oxides or in the synthesis of nitriles or imines from amines, is formed by preparing an intimate mechanical mixture of a copper (II)-containing species, such as CuO or CuCl{sub 2}, or elemental copper, with a zeolite having a pore mouth comprising 10 oxygen atoms, such as ZSM-5, converting the elemental copper or copper (II) to copper (I), and driving the copper (I) into the zeolite.

  15. REM-containing silicate concentrates

    NASA Astrophysics Data System (ADS)

    Pavlov, V. F.; Shabanova, O. V.; Pavlov, I. V.; Pavlov, M. V.; Shabanov, A. V.

    2016-01-01

    A new method of advanced complex processing of ores containing rare-earth elements (REE) is proposed to obtain porous X-ray amorphous aluminosilicate material with a stable chemical composition which concentrates oxides of rare-earth metals (REM). The ferromanganese oxide ores of Chuktukon deposit (Krasnoyarsk Region, RF) were used for the experiment. The obtained aluminosilicate material is appropriate for treatment with 5 - 15% solutions of mineral acids to leach REM.

  16. Platelet preservation: agitation and containers.

    PubMed

    van der Meer, Pieter F; de Korte, Dirk

    2011-06-01

    For platelets to maintain their in vitro quality and in vivo effectiveness, they need to be stored at room temperature with gentle agitation in gas-permeable containers. The mode of agitation affects the quality of the platelets, and a gentle method of agitation, either a circular or a flat bed movement, provides the best results. Tumblers or elliptical agitators induce platelet activation and subsequent damage. As long as the platelets remain in suspension, the agitation speed is not important. Agitation of the platelet concentrates ensures that the platelets are continuously oxygenated, that sufficient oxygen can enter the storage container and that excess carbon dioxide can be expelled. During transportation of platelet concentrates, nowadays over long distances where they are held without controlled agitation, platelets may tolerate a certain period without agitation. However, evidence is accumulating that during the time without agitation, local hypoxia surrounding the platelets may induce irreversible harm to the platelets. Over the decades, more gas-permeable plastics have been used to manufacture platelet containers. The use of different plastics and their influence on the platelet quality both in vitro and in vivo is discussed. The improved gas-permeability has allowed the extension of platelet storage from 3 days in the early 1980s, to currently at least 7 days. In the light of new developments, particularly the introduction of pathogen reduction techniques, the use of platelet additive solutions and the availability of improved automated separators, further (renewed) research in this area is warranted.

  17. Characterization of Aerosols Containing Microcystin

    PubMed Central

    Cheng, Yung Sung; Zhou, Yue; Irvin, C. Mitch; Kirkpatrick, Barbara; Backer, Lorraine C.

    2007-01-01

    Toxic blooms of cyanobacteria are ubiquitous in both freshwater and brackish water sources throughout the world. One class of cyanobacterial toxins, called microcystins, is cyclic peptides. In addition to ingestion and dermal, inhalation is a likely route of human exposure. A significant increase in reporting of minor symptoms, particularly respiratory symptoms was associated with exposure to higher levels of cyanobacteria during recreational activities. Algae cells, bacteria, and waterborne toxins can be aerosolized by a bubble-bursting process with a wind-driven white-capped wave mechanism. The purposes of this study were to: evaluate sampling and analysis techniques for microcystin aerosol, produce aerosol droplets containing microcystin in the laboratory, and deploy the sampling instruments in field studies. A high-volume impactor and an IOM filter sampler were tried first in the laboratory to collect droplets containing microcystins. Samples were extracted and analyzed for microcystin using an ELISA method. The laboratory study showed that cyanotoxins in water could be transferred to air via a bubble-bursting process. The droplets containing microcystins showed a bimodal size distribution with the mass median aerodynamic diameter (MMAD) of 1.4 and 27.8 μm. The sampling and analysis methods were successfully used in a pilot field study to measure microcystin aerosol in situ. PMID:18463733

  18. Profiles in garbage glass containers

    SciTech Connect

    Miller, C.

    1997-09-01

    Glass containers are made from sand, limestone, soda ash, cullet (crushed bottles), and various additives, including those used to color brown, green, or blue bottles. Sixty percent of the glass used in the US is clear (flint) and one-fourth is brown (amber). Almost half of the green bottles are imported wind and beer bottles. Other glass products include flat glass such as windows; fiberglass insulation; and glassware. These products use different manufacturing processes and different additives than container glass. This profile covers only container glass. Glass bottles are commonly collected in curb-side programs. Losses due to breakage and the abrasiveness of glass during collection and processing offset their low collection and processing costs. Breakage solutions include installation of interior baffles or nets in the collection trucks, special glass-only truck compartments, and limiting the number of times glass is transferred after collection before final processing. Ten states require deposits on glass bottles for beer and soft drinks and related items.

  19. 10 CFR 20.1904 - Labeling containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Labeling containers. 20.1904 Section 20.1904 Energy....1904 Labeling containers. (a) The licensee shall ensure that each container of licensed material bears... handling or using the containers, or working in the vicinity of the containers, to take precautions...

  20. 7 CFR 51.911 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Container. 51.911 Section 51.911 Agriculture... Standards for Grades of Table Grapes (European or Vinifera Type) 1 Definitions § 51.911 Container. Container... of grapes in packages containing 5 pounds or less, mean the master container in which the...

  1. 27 CFR 19.581 - Authorized containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Authorized containers. 19..., DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Containers and Marks Containers § 19.581 Authorized containers. (a) General. Proprietors shall use for any purpose of containing,...

  2. Antimicrobial hydantoin-containing polyesters.

    PubMed

    Tan, Licheng; Maji, Samarendra; Mattheis, Claudia; Zheng, Mengyao; Chen, Yiwang; Caballero-Díaz, E; Gil, Pilar Rivera; Parak, Wolfgang J; Greiner, Andreas; Agarwal, Seema

    2012-08-01

    A new N-hydantoin-containing biocompatible and enzymatically degradable polyester with antibacterial properties is presented. Different polyesters of dimethyl succinate, 1,4-butanediol, and 3-[N,N-di(β-hydroxyethyl)aminoethyl]-5,5-dimethylhydantoin in varying molar ratios are prepared via two-step melt polycondensation. The antibacterially active N-halamine form is obtained by subsequent chlorination of the polyesters with sodium hypochlorite. Chemical structures, thermal properties, and spherulitic morphologies of the copolymers are studied adopting FT-IR, NMR, TGA, DSC, WAXD, and POM. The polyesters exhibit antibacterial activity against Escherichia coli. The adopted synthetic approach can be transferred to other polyesters in a straightforward manner.

  3. Cobalt ion-containing epoxies

    NASA Technical Reports Server (NTRS)

    Stoakley, D. M.; St.clair, A. K.

    1983-01-01

    Varying concentrations of an organometallic cobalt complex were added to an epoxy system currently used by the aerospace industry as a composite matrix resin. Methods for combining cobalt (III) acetylacetonate with a tetraglycidyl 4,4 prime - diaminodiphenylmethane-based epoxy were investigated. The effects of increasing cobalt ion concentration on the epoxy cure were demonstrated by epoxy gel times and differential scanning calorimetry cure exotherms. Analysis on cured cobalt-containing epoxy castings included determination of glass transition temperatures by thermomechanical analysis, thermooxidative stabilities by thermogravimetric analysis, and densities in a density gradient column. Flexural strength and stiffness were also measured on the neat resin castings.

  4. Bilateral Inguinal Hernias Containing Ovaries

    PubMed Central

    Basrur, Gurudutt Bhaskar

    2015-01-01

    Inguinal hernias are rare in females. The authors report a case of bilateral inguinal hernias in a 10-year-old female. On exploration, the patient was found to be having a sliding hernia containing incarcerated ovary as contents on both sides. Peroperatively the contents were reduced, the sac was transfixed at its base and the redundant sac was excised. The repair of this form of hernias is more difficult because of adhesions between the contents and the wall of the sac and risk of damage during dissection. A description of this clinical presentation in the pre operative assessment and operative management are discussed in this report. PMID:25918632

  5. Rigid zeolite containing polyurethane foams

    DOEpatents

    Frost, C.B.

    1984-05-18

    A closed cell rigid polyurethane foam has been prepared which contains up to about 60% by weight of molecular sieves capable of sorbing molecules with effective critical diameters of up to about 10 A. The molecular sieve component of the foam can be preloaded with catalysts or with reactive compounds that can be released upon activation of the foam to control and complete crosslinking after the foam is formed. The foam can also be loaded with water or other flame-retarding agents, after completion. Up to about 50% of the weight of the isocyanate component of the foam can be replaced by polyimide resin precursors for incorporation into the final polymeric network.

  6. Split ring containment attachment device

    DOEpatents

    Sammel, Alfred G.

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  7. Treatment of mercury containing waste

    DOEpatents

    Kalb, Paul D.; Melamed, Dan; Patel, Bhavesh R; Fuhrmann, Mark

    2002-01-01

    A process is provided for the treatment of mercury containing waste in a single reaction vessel which includes a) stabilizing the waste with sulfur polymer cement under an inert atmosphere to form a resulting mixture and b) encapsulating the resulting mixture by heating the mixture to form a molten product and casting the molten product as a monolithic final waste form. Additional sulfur polymer cement can be added in the encapsulation step if needed, and a stabilizing additive can be added in the process to improve the leaching properties of the waste form.

  8. Rigid zeolite containing polyurethane foams

    DOEpatents

    Frost, Charles B.

    1985-01-01

    A closed cell rigid polyurethane foam has been prepared which contains up to about 60% by weight of molecular sieves capable of sorbing molecules with effective critical diameters of up to about 10 .ANG.. The molecular sieve component of the foam can be preloaded with catalysts or with reactive compounds that can be released upon activation of the foam to control and complete crosslinking after the foam is formed. The foam can also be loaded with water or other flame-retarding agents, after completion. Up to about 50% of the weight of the isocyanate component of the foam can be replaced by polyimide resin precursors for incorporation into the final polymeric network.

  9. Metal ion-containing epoxies

    NASA Technical Reports Server (NTRS)

    Stoakley, D. M.; St.clair, A. K.

    1982-01-01

    A variety of metallic and organometallic complexes to be used as potential additives for an epoxy used by the aerospace industry as a composite matrix resin were investigated. A total of 9 complexes were screened for compatibility and for their ability to accelerate or inhibit the cure of a highly crosslinkable epoxy resin. Methods for combining the metallic complexes with the resin were investigated, gel times recorded, and cure exotherms studied by differential scanning calorimetry. Glass transition temperatures of cured metal ion containing epoxy castings were determined by thermomechanical analysis. Thermal stabilities of the castings were determined by thermogravimetric analysis. Mechanical strength and stiffness of these doped epoxies were also measured.

  10. [Isoflavone-containing dietary supplements].

    PubMed

    Lehmann, Leane; Soukup, Sebastian T; Gerhäuser, Clarissa; Vollmer, Günter; Kulling, Sabine E

    2017-03-01

    Isoflavones (IFs) from soy and other legumes have weak estrogenic properties. Isolated IFs are available as dietary supplements and advertised to alleviate symptoms of menopause. The present chapter provides an overview of the occurrence, the chemical structure of IFs and their metabolites, the market situation and reviews the current evidence on the efficacy and safety of IF-containing dietary supplements.The biological effectiveness of IFs is attributable to the activation of the estrogen receptor (ER). Studies on the influence of IFs on endogenous estrogen levels in women show inconsistent results. So far, the European Food Safety Authority (EFSA) has rejected all submitted health claims for IFs due to insufficient scientific evidence for any of the postulated health effects. Based on the results of their recent risk assessment, the EFSA concluded that the available human studies did not support the hypothesis of adverse effects of isolated IFs on the human mammary gland, uterus or thyroid in healthy postmenopausal women. However, the assessment does not allow a general statement on the safety of IF-containing dietary supplements. Studies in animal models are often not comparable with the complex interactions in humans due to differences in the metabolism of IFs, in the developmental stage at time of consumption and in the temporarily restricted uptake of IFs during certain stages of life.

  11. Radiological containment selection, design, and specification guide

    SciTech Connect

    Brown, R.L.

    1994-11-01

    This document provides guidance to Tank Waste Remediation Systems personnel in determining what containment is appropriate for work activities, what containments are available, general applications of each, design criteria, and other information needed to make informed decisions concerning containment application.

  12. High Energy Flywheel Containment Evaluation

    NASA Technical Reports Server (NTRS)

    Colozza, Anthony J.; Trase, Larry (Technical Monitor)

    2000-01-01

    A flywheel testing facility is being constructed at the NASA Glenn Research Center. This facility is to be used for life cycle testing of various flywheel rotors. The lifecycle testing consists of spinning a rotor from a low rpm (approx. 20,000 ) to a high rpm (approx. 60,000) and then back to the low rpm. This spin cycle will model that which the rotor will see during use. To simulate the lifetime of the rotor, the spin cycle will be performed tens of thousands of times. A typical life cycle spin test is expected to last six months. During this time the rotor will be spun through a cycle every five minutes. The test will run continuously for the six month period barring a flywheel failure. Since it is not reasonable to have the surrounding area evacuated of personnel for the duration of the testing, the flywheel facility has to be designed to withstand a flywheel rotor failure and insure that there is no danger to any personnel in the adjacent buildings or surrounding areas. In order to determine if the facility can safely contain a flywheel rotor failure an analysis of the facility in conjunction with possible flywheel failure modes was performed. This analysis is intended as a worst case evaluation of the burst liner and vacuum tank's ability to contain a failure. The test chamber consists of a cylindrical stainless steel vacuum tank, two outer steel containment rings, and a stainless steel burst liner. The stainless steel used is annealed 302, which has an ultimate strength of 620 MPa (90,000 psi). A diagram of the vacuum tank configuration is shown. The vacuum tank and air turbine will be located below ground in a pit. The tank is secured in the pit with 0.3 m (12 in.) of cement along the base and the remaining portion of the tank is surrounded by gravel up to the access ports. A 590 kg (1300 lb.) bulkhead is placed on top of the pit during operation and the complete facility is housed within a concrete structure which has 7.5 cm (3 in.) thick walls. A cutaway

  13. Boundary control of container cranes

    NASA Astrophysics Data System (ADS)

    Park, Hahn; Hong, Keum-Shik

    2005-12-01

    The control objectives in this paper are to move the gantry of a container crane to its target position and to suppress the transverse vibration of the payload. The crane system is modeled as an axially moving nonlinear string, in which control inputs are applied at both ends, through the gantry and the payload. The dynamics of the moving string are derived using Hamilton's principle. The Lyapunov function method is used in deriving a boundary control law, in which the Lyapunov function candidate is introduced from the total mechanical energy of the system. The performance of the proposed control law is compared with other two control algorithms available in the literature. Experimental results are given.

  14. Metal containing polymeric functional microspheres

    NASA Technical Reports Server (NTRS)

    Yen, Shiao-Ping S. (Inventor); Rembaum, Alan (Inventor); Molday, Robert S. (Inventor)

    1979-01-01

    Polymeric functional microspheres containing metal or metal compounds are formed by addition polymerization of a covalently bondable olefinic monomer such as hydroxyethylmethacrylate in the presence of finely divided metal or metal oxide particles, such as iron, gold, platinum or magnetite, which are embedded in the resulting microspheres. The microspheres can be covalently bonded to chemotherapeutic agents, antibodies, or other proteins providing a means for labeling or separating labeled cells. Labeled cells or microspheres can be concentrated at a specific body location such as in the vicinity of a malignant tumor by applying a magnetic field to the location and then introducing the magnetically attractable microspheres or cells into the circulatory system of the subject. Labeled cells can be separated from a cell mixture by applying a predetermined magnetic field to a tube in which the mixture is flowing. After collection of the labeled cells, the magnetic field is discontinued and the labeled sub-cell population recovered.

  15. Large panel design for containment air baffle

    DOEpatents

    Orr, Richard S.

    1992-01-01

    The movable air baffle shield means in accordance with the present invention provides an efficient method of cooling the space surrounding the containment vessel while also providing the capability of being moved away from the containment vessel during inspection. The containment apparatus comprises a generally cylindrical sealed containment vessel for containing at least a portion of a nuclear power generation plant, a disparate shield building surrounding and housing the containment vessel therein and spaced outwardly thereof so as to form an air annulus in the space between the shield building and the containment vessel, a shield baffle means positioned in the air annulus around at least a portion of the sides of the containment vessel providing a coolant path between the baffle means and the containment vessel to permit cooling of the containment vessel by air, the shield baffle means being movable to afford access to the containment vessel.

  16. Large panel design for containment air baffle

    DOEpatents

    Orr, R.S.

    1992-12-08

    The movable air baffle shield means in accordance with the present invention provides an efficient method of cooling the space surrounding the containment vessel while also providing the capability of being moved away from the containment vessel during inspection. The containment apparatus comprises a generally cylindrical sealed containment vessel for containing at least a portion of a nuclear power generation plant, a disparate shield building surrounding and housing the containment vessel therein and spaced outwardly thereof so as to form an air annulus in the space between the shield building and the containment vessel, a shield baffle means positioned in the air annulus around at least a portion of the sides of the containment vessel providing a coolant path between the baffle means and the containment vessel to permit cooling of the containment vessel by air, the shield baffle means being movable to afford access to the containment vessel. 9 figs.

  17. 27 CFR 44.187 - Shipping containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44... Shipping containers. Each shipping case, crate, or other container in which tobacco products, or cigarette... same containers in which they were received from the factory. (72 Stat. 1418, as amended; 26...

  18. 7 CFR 987.48 - Container regulation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container regulation. 987.48 Section 987.48... IN RIVERSIDE COUNTY, CALIFORNIA Order Regulating Handling Container Regulation § 987.48 Container regulation. Whenever the Committee deems it advisable to establish a container regulation for any variety...

  19. 21 CFR 100.100 - Misleading containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Misleading containers. 100.100 Section 100.100... containers. In accordance with section 403(d) of the act, a food shall be deemed to be misbranded if its container is so made, formed, or filled as to be misleading. (a) A container that does not allow...

  20. 46 CFR 160.023-6 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.023-6 Section 160.023-6 Shipping COAST... Container. (a) General. The container for storing the signals on lifeboats and liferafts is not required to be of a special design or be approved by the Coast Guard. The container must meet the requirements...

  1. 7 CFR 58.923 - Filling containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Filling containers. 58.923 Section 58.923 Agriculture... Procedures § 58.923 Filling containers. (a) The filling of small containers with product shall be done in a sanitary manner. The containers shall not contaminate or detract from the quality of the product in any...

  2. 46 CFR 160.036-6 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.036-6 Section 160.036-6 Shipping COAST... § 160.036-6 Container. (a) General. The container for storing the signals on lifeboats and liferafts is not required to be of a special design or be approved by the Coast Guard. The container must meet...

  3. 7 CFR 58.729 - Forming containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Forming containers. 58.729 Section 58.729 Agriculture... Procedures § 58.729 Forming containers. Containers either lined or unlined shall be assembled and stored in a sanitary manner to prevent contamination. The handling of containers by filler crews should be done...

  4. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.026-3 Section 160.026-3 Shipping COAST...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Water, Emergency Drinking (In Hermetically Sealed Containers), for Merchant Vessels § 160.026-3 Container. (a) General. The emergency drinking water container...

  5. 7 CFR 201.42 - Small containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Small containers. 201.42 Section 201.42 Agriculture... REGULATIONS Sampling in the Administration of the Act § 201.42 Small containers. In sampling seed in small containers that it is not practical to sample as required in § 201.41, a portion of one unopened container...

  6. 21 CFR 1230.47 - Rejected containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rejected containers. 1230.47 Section 1230.47 Food... FEDERAL CAUSTIC POISON ACT Imports § 1230.47 Rejected containers. (a) In all cases where the containers... notification to the importer that the containers must be exported under customs supervision within 3...

  7. 76 FR 46805 - Notice of Utah Adoption by Reference of the Pesticide Container Containment Rule

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Notice of Utah Adoption by Reference of the Pesticide Container Containment Rule AGENCY... the State of Utah's adoption by reference of the federal Pesticide Container Containment (PCC)...

  8. Economic alternatives for containment barriers

    SciTech Connect

    Nicholson, P.J.; Jasperse, B.H.; Fisher, M.J.

    1997-12-31

    Fixation, barriers, and containment of existing landfills and other disposal areas are often performed by insitu auger type soil mixing and jet grouting. Cement or other chemical reagents are mixed with soil to form both vertical and horizontal barriers. Immobilization of contaminants can be economically achieved by mixing soil and the contaminants with reagents that solidify or stabilize the contaminated area. Developed in Japan, and relatively new to the United States, the first large scale application was for a vertical barrier at the Jackson Lake Dam project in 1986. This technology has grown in both the civil and environmental field since. The paper describes current United States practice for Deep Soil Mixing (over 12 meters in depth), and Shallow Soil Mixing for vertical barriers and stabilization/solidification, and Jet Grouting for horizontal and vertical barriers. Creating very low permeability barriers at depth with minimal surface return often makes these techniques economical when compared to slurry trenches. The paper will discuss equipment, materials, soil and strength parameters, and quality control.

  9. Generalized waste package containment model

    SciTech Connect

    Liebetrau, A.M.; Apted, M.J.

    1985-02-01

    The US Department of Energy (DOE) is developing a performance assessment strategy to demonstrate compliance with standards and technical requirements of the Environmental Protection Agency (EPA) and the Nuclear Regulatory Commission (NRC) for the permanent disposal of high-level nuclear wastes in geologic repositories. One aspect of this strategy is the development of a unified performance model of the entire geologic repository system. Details of a generalized waste package containment (WPC) model and its relationship with other components of an overall repository model are presented in this paper. The WPC model provides stochastically determined estimates of the distributions of times-to-failure of the barriers of a waste package by various corrosion mechanisms and degradation processes. The model consists of a series of modules which employ various combinations of stochastic (probabilistic) and mechanistic process models, and which are individually designed to reflect the current state of knowledge. The WPC model is designed not only to take account of various site-specific conditions and processes, but also to deal with a wide range of site, repository, and waste package configurations. 11 refs., 3 figs., 2 tabs.

  10. Synthesizing topological structures containing RNA.

    PubMed

    Liu, Di; Shao, Yaming; Chen, Gang; Tse-Dinh, Yuk-Ching; Piccirilli, Joseph A; Weizmann, Yossi

    2017-03-31

    Though knotting and entanglement have been observed in DNA and proteins, their existence in RNA remains an enigma. Synthetic RNA topological structures are significant for understanding the physical and biological properties pertaining to RNA topology, and these properties in turn could facilitate identifying naturally occurring topologically nontrivial RNA molecules. Here we show that topological structures containing single-stranded RNA (ssRNA) free of strong base pairing interactions can be created either by configuring RNA-DNA hybrid four-way junctions or by template-directed synthesis with a single-stranded DNA (ssDNA) topological structure. By using a constructed ssRNA knot as a highly sensitive topological probe, we find that Escherichia coli DNA topoisomerase I has low RNA topoisomerase activity and that the R173A point mutation abolishes the unknotting activity for ssRNA, but not for ssDNA. Furthermore, we discover the topological inhibition of reverse transcription (RT) and obtain different RT-PCR patterns for an ssRNA knot and circle of the same sequence.

  11. Contained radiological analytical chemistry module

    DOEpatents

    Barney, David M.

    1990-01-01

    A system which provides analytical determination of a plurality of water chemistry parameters with respect to water samples subject to radiological contamination. The system includes a water sample analyzer disposed within a containment and comprising a sampling section for providing predetermined volumes of samples for analysis; a flow control section for controlling the flow through the system; and a gas analysis section for analyzing samples provided by the sampling system. The sampling section includes a controllable multiple port valve for, in one position, metering out sample of a predetermined volume and for, in a second position, delivering the material sample for analysis. The flow control section includes a regulator valve for reducing the pressure in a portion of the system to provide a low pressure region, and measurement devices located in the low pressure region for measuring sample parameters such as pH and conductivity, at low pressure. The gas analysis section which is of independent utility provides for isolating a small water sample and extracting the dissolved gases therefrom into a small expansion volume wherein the gas pressure and thermoconductivity of the extracted gas are measured.

  12. Contained radiological analytical chemistry module

    DOEpatents

    Barney, David M.

    1989-01-01

    A system which provides analytical determination of a plurality of water chemistry parameters with respect to water samples subject to radiological contamination. The system includes a water sample analyzer disposed within a containment and comprising a sampling section for providing predetermined volumes of samples for analysis; a flow control section for controlling the flow through the system; and a gas analysis section for analyzing samples provided by the sampling system. The sampling section includes a controllable multiple port valve for, in one position, metering out sample of a predetermined volume and for, in a second position, delivering the material sample for analysis. The flow control section includes a regulator valve for reducing the pressure in a portion of the system to provide a low pressure region, and measurement devices located in the low pressure region for measuring sample parameters such as pH and conductivity, at low pressure. The gas analysis section which is of independent utility provides for isolating a small water sample and extracting the dissolved gases therefrom into a small expansion volume wherein the gas pressure and thermoconductivity of the extracted gas are measured.

  13. Heteroatom-Containing Porphyrin Analogues.

    PubMed

    Chatterjee, Tamal; Shetti, Vijayendra S; Sharma, Ritambhara; Ravikanth, Mangalampalli

    2017-02-22

    The heteroatom-containing porphyrin analogues or core-modified porphyrins that resulted from the replacement of one or two pyrrole rings with other five-membered heterocycles such as furan, thiophene, selenophene, tellurophene, indene, phosphole, and silole are highly promising macrocycles and exhibit quite different physicochemical properties compared to regular azaporphyrins. The properties of heteroporphyrins depend on the nature and number of different heterocycle(s) present in place of pyrrole ring(s). The heteroporphyrins provide unique and unprecedented coordination environments for metals. Unlike regular porphyrins, the monoheteroporphyrins are known to stabilize metals in unusual oxidation states such as Cu and Ni in +1 oxidation states. The diheteroporphyrins, which are neutral macrocycles without ionizable protons, also showed interesting coordination chemistry. Thus, significant progress has been made in last few decades on core-modified porphyrins in terms of their synthesis, their use in building multiporphyrin arrays for light-harvesting applications, their use as ligands to form interesting metal complexes, and also their use for several other studies. The synthetic methods available in the literature allow one to prepare mono- and diheteroporphyrins and their functionalized derivatives, which were used extensively to prepare several covalent and noncovalent heteroporphyrin-based multiporphyrin arrays. The methods are also developed to synthesize different hetero analogues of porphyrin derivatives such as heterocorroles, heterochlorins, heterocarbaporphyrinoids, heteroatom-substituted confused porphyrins, and so on. This Review summarizes the key developments that have occurred in heteroporphyrin chemistry over the last four decades.

  14. 75 FR 26268 - Agency Information Collection Activities: Permit To Transfer Containers to a Container Station

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-11

    ... Containers to a Container Station AGENCY: U.S. Customs and Border Protection, Department of Homeland Security... concerning the: Permit to Transfer Containers to a Container Station. This request for comment is being made... Containers to a Container Station. OMB Number: 1651-0049. Form Number: None. Abstract: This...

  15. Biopolymers Containing Unnatural Building Blocks

    SciTech Connect

    Schultz, Peter G.

    2013-06-30

    Although the main chain structure of polymers has a profound effect on their materials properties, the side groups can also have dramatic effects on their properties including conductivity, liquid crystallinity, hydrophobicity, elasticity and biodegradability. Unfortunately control over the side chain structure of polymers remains a challenge – it is difficult to control the sequence of chain elongation when mixtures of monomers are polymerized, and postpolymerization side chain modification is made difficult by polymer effects on side chain reactivity. In contrast, the mRNA templated synthesis of polypeptides on the ribosome affords absolute control over the primary sequence of the twenty amino acid monomers. Moreover, the length of the biopolymer is precisely controlled as are sites of crosslinking. However, whereas synthetic polymers can be synthesized from monomers with a wide range of chemically defined structures, ribosomal biosynthesis is largely limited to the 20 canonical amino acids. For many applications in material sciences, additional building blocks would be desirable, for example, amino acids containing metallocene, photoactive, and halogenated side chains. To overcome this natural constraint we have developed a method that allows unnatural amino acids, beyond the common twenty, to be genetically encoded in response to nonsense or frameshift codons in bacteria, yeast and mammalian cells with high fidelity and good yields. Here we have developed methods that allow identical or distinct noncanonical amino acids to be incorporated at multiple sites in a polypeptide chain, potentially leading to a new class of templated biopolymers. We have also developed improved methods for genetically encoding unnatural amino acids. In addition, we have genetically encoded new amino acids with novel physical and chemical properties that allow selective modification of proteins with synthetic agents. Finally, we have evolved new metal-ion binding sites in proteins

  16. 7 CFR 810.1005 - Special grades and special grade requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... contain more than 0.10 percent ergot. (d) Extra-heavy oats. Oats that have a test weight per bushel of 40 pounds or more. (e) Garlicky oats. Oats that contain 4 or more green garlic bulblets or an equivalent quantity of dry or partly dry bulblets in 500 grams of oats. (f) Heavy oats. Oats that have a test...

  17. 7 CFR 810.1005 - Special grades and special grade requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... contain more than 0.10 percent ergot. (d) Extra-heavy oats. Oats that have a test weight per bushel of 40 pounds or more. (e) Garlicky oats. Oats that contain 4 or more green garlic bulblets or an equivalent quantity of dry or partly dry bulblets in 500 grams of oats. (f) Heavy oats. Oats that have a test...

  18. IP-1 Certification of Cargo Containers

    SciTech Connect

    Hagler, Lisle

    2010-10-05

    The purpose and scope of this engineering note is to demonstrate that the structural design of the cargo container complies with the IP-1 container requirements of 49 CFR 173.410 as required by CFR 173.411.

  19. Nuclear waste storage container with metal matrix

    DOEpatents

    Sump, Kenneth R.

    1978-01-01

    The invention relates to a storage container for high-level waste having a metal matrix for the high-level waste, thereby providing greater impact strength for the waste container and increasing heat transfer properties.

  20. 46 CFR 160.037-6 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a....021 (§ 160.021-6) except that the wording on the container must be: “Hand Orange Smoke...

  1. 46 CFR 160.037-6 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a....021 (§ 160.021-6) except that the wording on the container must be: “Hand Orange Smoke...

  2. 46 CFR 160.037-6 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a....021 (§ 160.021-6) except that the wording on the container must be: “Hand Orange Smoke...

  3. 46 CFR 160.037-6 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a....021 (§ 160.021-6) except that the wording on the container must be: “Hand Orange Smoke...

  4. 46 CFR 160.037-6 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a....021 (§ 160.021-6) except that the wording on the container must be: “Hand Orange Smoke...

  5. Remote possibly hazardous content container sampling device

    DOEpatents

    Volz, David L.

    1998-01-01

    The present invention relates to an apparatus capable of sampling enclosed containers, where the contents of the container is unknown. The invention includes a compressed air device capable of supplying air pressure, device for controlling the amount of air pressure applied, a pneumatic valve, a sampling device having a hollow, sampling insertion needle suspended therein and device to communicate fluid flow between the container and a containment vessel, pump or direct reading instrument.

  6. 7 CFR 58.339 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Procedures § 58.339 Containers. (a) Containers used for the packaging of butter and related products shall be..., parchment liners for bulk butter packages shall be completely immersed in a boiling salt solution in a... contamination of the liner prior to filling. (c) Filling bulk butter containers. The lined butter...

  7. 7 CFR 58.339 - Containers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Procedures § 58.339 Containers. (a) Containers used for the packaging of butter and related products shall be..., parchment liners for bulk butter packages shall be completely immersed in a boiling salt solution in a... contamination of the liner prior to filling. (c) Filling bulk butter containers. The lined butter...

  8. Vacuum-Gauge Connection For Shipping Container

    NASA Technical Reports Server (NTRS)

    Henry, Robert H.

    1990-01-01

    External connector enables measurement of vacuum in stored part. Remote-readout connector added to shipping container and connected to thermo-couple vacuum gauge in vacuum-insulated cryogenic line packed in container. Enables monitoring of condition of vacuum without opening container.

  9. 49 CFR 178.318-2 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.318-2 Container. (a) Every container for detonators and..., phenolresinous or other resinous material, or other nonmetallic, nonsparking material, except that metal...

  10. 49 CFR 178.318-2 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.318-2 Container. (a) Every container for detonators and..., phenolresinous or other resinous material, or other nonmetallic, nonsparking material, except that metal...

  11. 49 CFR 178.318-2 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.318-2 Container. (a) Every container for detonators and..., phenolresinous or other resinous material, or other nonmetallic, nonsparking material, except that metal...

  12. 49 CFR 178.318-2 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers for Motor Vehicle Transportation § 178.318-2 Container. (a) Every container for detonators and..., phenolresinous or other resinous material, or other nonmetallic, nonsparking material, except that metal...

  13. 27 CFR 30.44 - Weighing containers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... fractional part of a gallon equivalent to 1 pound, to obtain the weight of the spirits in pounds and... OF THE TREASURY LIQUORS GAUGING MANUAL Gauging Procedures Determination of Quantity by Weight § 30.44 Weighing containers. (a) Weighing containers of more than 10 wine gallons. The weight of containers...

  14. 27 CFR 30.44 - Weighing containers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... fractional part of a gallon equivalent to 1 pound, to obtain the weight of the spirits in pounds and... OF THE TREASURY ALCOHOL GAUGING MANUAL Gauging Procedures Determination of Quantity by Weight § 30.44 Weighing containers. (a) Weighing containers of more than 10 wine gallons. The weight of containers...

  15. 7 CFR 916.14 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 916.14 Section 916.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 916.14 Container. Container means a box, bag, crate, lug, basket,...

  16. 7 CFR 922.17 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 922.17 Section 922.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... IN WASHINGTON Order Regulating Handling Definitions § 922.17 Container. Container means a box,...

  17. 40 CFR 63.688 - Standards: Containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Standards: Containers. 63.688 Section... Standards: Containers. (a) The provisions of this section apply to the control of air emissions from containers for which § 63.683(b)(1)(i) of this subpart references the use of this section for such...

  18. 7 CFR 966.13 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 966.13 Section 966.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 966.13 Container. Container means a box, bag, crate, hamper,...

  19. 7 CFR 948.14 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 948.14 Section 948.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.14 Container. Container means a sack, bag, crate,...

  20. 7 CFR 959.13 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 959.13 Section 959.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 959.13 Container. Container means a box, bag, crate, hamper,...

  1. 7 CFR 920.14 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 920.14 Section 920.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Definitions § 920.14 Container. Container means a box, bag, crate, lug, basket, carton, package, or any...

  2. 7 CFR 956.9 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 956.9 Section 956.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Definitions § 956.9 Container. Container means a...

  3. 7 CFR 946.18 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 946.18 Section 946.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 946.18 Container. Container means a sack, box, bag,...

  4. 7 CFR 924.17 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 924.17 Section 924.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Container. Container means a box, bag, crate, lug, basket, carton, package, or any other type of...

  5. 7 CFR 160.32 - Marking containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Marking containers. 160.32 Section 160.32 Agriculture... STANDARDS FOR NAVAL STORES Analysis, Inspection, and Grading on Request § 160.32 Marking containers. The interested person shall provide any labor necessary for marking the containers, after the contents have...

  6. 40 CFR 264.1086 - Standards: Containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Standards: Containers. 264.1086... Air Emission Standards for Tanks, Surface Impoundments, and Containers § 264.1086 Standards: Containers. (a) The provisions of this section apply to the control of air pollutant emissions...

  7. 7 CFR 956.162 - Container markings.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container markings. 956.162 Section 956.162... WALLA VALLEY OF SOUTHEAST WASHINGTON AND NORTHEAST OREGON Rules and Regulations § 956.162 Container markings. Effective April 15, 1997, no handler shall ship any container of Walla Walla Sweet Onions...

  8. 7 CFR 923.17 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 923.17 Section 923.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... COUNTIES IN WASHINGTON Order Regulating Handling Definitions § 923.17 Container. Container means a box,...

  9. 27 CFR 28.94 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Containers. 28.94 Section... Manufacturing Bonded Warehouse § 28.94 Containers. Distilled spirits authorized to be withdrawn without payment... be withdrawn from such establishment in such containers as may be authorized in part 19 of...

  10. 27 CFR 27.121 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Containers. 27.121 Section... Spirits In Bulk § 27.121 Containers. Imported distilled spirits may be bottled in either domestic or imported containers conforming to the provisions of subpart N of this part. (72 Stat. 1374; 26 U.S.C. 5301)...

  11. 27 CFR 20.145 - Encased containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Encased containers. 20.145... Denatured Alcohol § 20.145 Encased containers. Completely denatured alcohol may be packaged by distributors in unlabeled containers which are completely encased in wood, fiberboard, or similar material so...

  12. 27 CFR 44.254 - Shipping containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44.254 Section 44.254 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Requirements § 44.254 Shipping containers. Each shipping case, crate, or other container, in which cigars...

  13. 46 CFR 160.028-6 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.028-6 Section 160.028-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... Container. (a) General. Containers for the stowage of signal pistols and pistol projected parachute...

  14. 7 CFR 958.17 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 958.17 Section 958.17 Agriculture... COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 958.17 Container. Container means a sack, box, bag, crate, hamper, basket, carton, package, or any other type of...

  15. 7 CFR 58.150 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Containers. 58.150 Section 58.150 Agriculture... Identification § 58.150 Containers. (a) The size, style, and type of packaging used for dairy products shall be commercially acceptable containers and packaging materials which will satisfactorily cover and protect...

  16. 7 CFR 906.12 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 906.12 Section 906.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... RIO GRANDE VALLEY IN TEXAS Order Regulating Handling Definitions § 906.12 Container. Container...

  17. 7 CFR 925.13 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 925.13 Section 925.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... SOUTHEASTERN CALIFORNIA Definitions § 925.13 Container. Container means any lug, box, bag, crate, carton,...

  18. 27 CFR 20.177 - Encased containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Encased containers. 20.177... Users of Specially Denatured Spirits Operations by Dealers § 20.177 Encased containers. (a) A dealer may package specially denatured spirits in unlabeled containers which are completely encased in...

  19. 40 CFR 265.1087 - Standards: Containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Standards: Containers. 265.1087... DISPOSAL FACILITIES Air Emission Standards for Tanks, Surface Impoundments, and Containers § 265.1087 Standards: Containers. (a) The provisions of this section apply to the control of air pollutant...

  20. 7 CFR 945.16 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 945.16 Section 945.16 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Container. Container means a sack, box, bag, crate, hamper, basket, carton, package, barrel, or any...

  1. 7 CFR 917.12 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Container. 917.12 Section 917.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... CALIFORNIA Order Regulating Handling Definitions § 917.12 Container. Container means a box, bag, crate,...

  2. 7 CFR 51.911 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Container. 51.911 Section 51.911 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Definitions § 51.911 Container. Container as used in these standards shall, for the purposes of...

  3. 7 CFR 51.911 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Container. 51.911 Section 51.911 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Definitions § 51.911 Container. Container as used in these standards shall, for the purposes of...

  4. 46 CFR 160.021-6 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Red Flare Distress Signals § 160.021-6 Container. (a) General. Containers for stowage of hand red flare distress signals in lifeboats and life rafts on merchant... corrosion-resistant to salt water and spray. The type container illustrated by Figure Number 160.021-6(a)...

  5. 46 CFR 160.021-6 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Red Flare Distress Signals § 160.021-6 Container. (a) General. Containers for stowage of hand red flare distress signals in lifeboats and life rafts on merchant... corrosion-resistant to salt water and spray. The type container illustrated by Figure Number 160.021-6(a)...

  6. 46 CFR 160.021-6 - Container.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Red Flare Distress Signals § 160.021-6 Container. (a) General. Containers for stowage of hand red flare distress signals in lifeboats and life rafts on merchant... corrosion-resistant to salt water and spray. The type container illustrated by Figure Number 160.021-6(a)...

  7. Sliding indirect hernia containing both ovaries.

    PubMed

    Fowler, Carol L

    2005-09-01

    Although sliding indirect inguinal hernias containing the ipsilateral ovary and fallopian tube are not uncommon in infant girls, sliding hernias containing both ovaries are rare. This report describes a large indirect inguinal hernia in a 1-year-old infant girl that contained the left uterine fundus, left bladder ear, as well as both ovaries and fallopian tubes.

  8. 21 CFR 100.100 - Misleading containers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... of product contained therein. Nonfunctional slack-fill is the empty space in a package that is filled... product settling during shipping and handling; (4) The need for the package to perform a specific function... product consists of a food packaged in a reusable container where the container is part of...

  9. Weapon container catalog. Volumes 1 & 2

    SciTech Connect

    Brown, L.A.; Higuera, M.C.

    1998-02-01

    The Weapon Container Catalog describes H-gear (shipping and storage containers, bomb hand trucks and the ancillary equipment required for loading) used for weapon programs and for special use containers. When completed, the catalog will contain five volumes. Volume 1 for enduring stockpile programs (B53, B61, B83, W62, W76, W78, W80, W84, W87, and W88) and Volume 2, Special Use Containers, are being released. The catalog is intended as a source of information for weapon program engineers and also provides historical information. The catalog also will be published on the SNL Internal Web and will undergo periodic updates.

  10. Containment loads due to direct containment heating and associated hydrogen behavior: Analysis and calculations with the CONTAIN code

    SciTech Connect

    Williams, D C; Bergeron, K D; Carroll, D E; Gasser, R D; Tills, J L; Washington, K E

    1987-05-01

    One of the most important unresolved issues governing risk in many nuclear power plants involves the phenomenon called direct containment heating (DCH), in which it is postulated that molten corium ejected under high pressure from the reactor vessel is dispersed into the containment atmosphere, thereby causing sufficient heating and pressurization to threaten containment integrity. Models for the calculation of potential DCH loads have been developed and incorporated into the CONTAIN code for severe accident analysis. Using CONTAIN, DCH scenarios in PWR plants having three different representative containment types have been analyzed: Surry (subatmospheric large dry containment), Sequoyah (ice condenser containment), and Bellefonte (atmospheric large dry containment). A large number of parameter variation and phenomenological uncertainty studies were performed. Response of DCH loads to these variations was found to be quite complex; often the results differ substantially from what has been previously assumed concerning DCH. Containment compartmentalization offers the potential of greatly mitigating DCH loads relative to what might be calculated using single-cell representations of containments, but the actual degree of mitigation to be expected is sensitive to many uncertainties. Dominant uncertainties include hydrogen combustion phenomena in the extreme environments produced by DCH scenarios, and factors which affect the rate of transport of DCH energy to the upper containment. In addition, DCH loads can be aggravated by rapid blowdown of the primary system, co-dispersal of moderate quantities of water with the debris, and quenching of de-entrained debris in water; these factors act by increasing steam flows which, in turn, accelerates energy transport. It may be noted that containment-threatening loads were calculated for a substantial portion of the scenarios treated for some of the plants considered.

  11. Performance of Sequoyah Containment Anchorage System

    SciTech Connect

    Fanous, F.; Greimann, L.; Wassef, W.; Bluhm, D.

    1993-01-01

    Deformation of a steel containment anchorage system during a severe accident may result in a leakage path at the containment boundaries. Current design criteria are based on either ductile or brittle failure modes of headed bolts that do not account for factors such as cracking of the containment basemat or deformation of the anchor bolt that may affect the behavior of the containment anchorage system. The purpose of this study was to investigate the performance of a typical ice condenser containment`s anchorage system. This was accomplished by analyzing the Sequoyah Containment Anchorage System. Based on a strength of materials approach and assuming that the anchor bolts are resisting the uplift caused by the internal pressure, one can estimate that the failure of the anchor bolts would occur at a containment pressure of 79 psig. To verify these results and to calibrate the strength of materials equation, the Sequoyah containment anchorage system was analyzed with the ABAQUS program using a three-dimensional, finite-element model. The model included portions of the steel containment building, shield building, anchor bolt assembly, reinforced concrete mat and soil foundation material.

  12. Filtered-vented containment systems. [PWR; BWR

    SciTech Connect

    Benjamin, A S; Walling, H C; Cybulskis, P; DiSalvo, R

    1980-01-01

    The potential benefits of filtered-vented containment systems as a means for mitigating the effects of severe accidents are analyzed. Studies so far have focused upon two operating reactor plants in the United States, a large-containment pressurized water reactor and a Mark I containment boiling water reactor. Design options that could be retrofitted to these plants are described including single-component once-through venting systems, multiple-component systems with vent and recirculation capabilities, and totally contained venting systems. A variety of venting strategies are also described which include simple low-volume containment pressure relief strategies and more complicated, high-volume venting strategies that require anticipatory actions. The latter type of strategy is intended for accidents that produce containment-threatening pressure spikes.

  13. System for inspection of stacked cargo containers

    SciTech Connect

    Derenzo, Stephen

    2011-08-16

    The present invention relates to a system for inspection of stacked cargo containers. One embodiment of the invention generally comprises a plurality of stacked cargo containers arranged in rows or tiers, each container having a top, a bottom a first side, a second side, a front end, and a back end; a plurality of spacers arranged in rows or tiers; one or more mobile inspection devices for inspecting the cargo containers, wherein the one or more inspection devices are removeably disposed within the spacers, the inspection means configured to move through the spacers to detect radiation within the containers. The invented system can also be configured to inspect the cargo containers for a variety of other potentially hazardous materials including but not limited to explosive and chemical threats.

  14. Containment performance perspectives based on IPE results

    SciTech Connect

    Lehner, J.R.; Lin, C.C.; Pratt, W.T.

    1996-12-31

    Perspectives on Containment Performance were obtained from the accident progression analyses, i.e. level 2 PRA analyses, found in the IPE submittals. Insights related to the containment failure modes, the releases associated with those failure modes, and the factors responsible for the types of containment failures and release sizes reported were gathered. The results summarized here are discussed in detail in volumes 1 and 2 of NUREG 1560. 3 refs., 4 figs.

  15. Treating nahcolite containing formations and saline zones

    DOEpatents

    Vinegar, Harold J

    2013-06-11

    A method for treating a nahcolite containing subsurface formation includes removing water from a saline zone in or near the formation. The removed water is heated using a steam and electricity cogeneration facility. The heated water is provided to the nahcolite containing formation. A fluid is produced from the nahcolite containing formation. The fluid includes at least some dissolved nahcolite. At least some of the fluid is provided to the saline zone.

  16. Analyses of containment structures with corrosion damage

    SciTech Connect

    Cherry, J.L.

    1996-12-31

    Corrosion damage to a nuclear power plant containment structure can degrade the pressure capacity of the vessel. For the low-carbon, low- strength steels used in containments, the effect of corrosion on material properties is discussed. Strain-to-failure tests, in uniaxial tension, have been performed on corroded material samples. Results were used to select strain-based failure criteria for corroded steel. Using the ABAQUS finite element analysis code, the capacity of a typical PWR Ice Condenser containment with corrosion damage has been studied. Multiple analyses were performed with the locations of the corrosion the containment, and the amount of corrosion varied in each analysis.

  17. 49 CFR 173.189 - Batteries containing sodium or cells containing sodium.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Batteries containing sodium or cells containing sodium. 173.189 Section 173.189 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.189 Batteries containing sodium or cells containing sodium....

  18. 49 CFR 173.189 - Batteries containing sodium or cells containing sodium.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Batteries containing sodium or cells containing sodium. 173.189 Section 173.189 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.189 Batteries containing sodium or cells containing sodium....

  19. 49 CFR 173.189 - Batteries containing sodium or cells containing sodium.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Batteries containing sodium or cells containing sodium. 173.189 Section 173.189 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.189 Batteries containing sodium or cells containing sodium....

  20. 49 CFR 173.189 - Batteries containing sodium or cells containing sodium.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Batteries containing sodium or cells containing sodium. 173.189 Section 173.189 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.189 Batteries containing sodium or cells containing sodium....

  1. 49 CFR 173.189 - Batteries containing sodium or cells containing sodium.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Batteries containing sodium or cells containing sodium. 173.189 Section 173.189 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.189 Batteries containing sodium or cells containing sodium....

  2. 7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Minimum test weight per bushel (pounds) Maximum limits of— Damaged Sunflower Seed Heat Damaged (percent... U.S. Nos. 1 or 2; or (b) Contains 8 or more stones which have an aggregate weight in excess of 0.20 percent of the sample weight, 2 or more pieces of glass, 3 or more crotalaria seeds (Crotalaria spp.),...

  3. 7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Minimum test weight per bushel (pounds) Maximum limits of— Damaged Sunflower Seed Heat Damaged (percent... U.S. Nos. 1 or 2; or (b) Contains 8 or more stones which have an aggregate weight in excess of 0.20 percent of the sample weight, 2 or more pieces of glass, 3 or more crotalaria seeds (Crotalaria spp.),...

  4. 7 CFR 810.1804 - Grades and grade requirements for sunflower seed.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Minimum test weight per bushel (pounds) Maximum limits of— Damaged Sunflower Seed Heat Damaged (percent... U.S. Nos. 1 or 2; or (b) Contains 8 or more stones which have an aggregate weight in excess of 0.20 percent of the sample weight, 2 or more pieces of glass, 3 or more crotalaria seeds (Crotalaria spp.),...

  5. Resolution of the direct containment heating issue for all Westinghouse plants with large dry containments or subatmospheric containments

    SciTech Connect

    Pilch, M.M.; Allen, M.D.; Klamerus, E.W.

    1996-03-01

    This report uses the methodology and scenarios described in NUREG/CR-6075 and NUREG/CR-6075, Supplement 1, to address the direct containment heating (DCH) issue for all Westinghouse plants with large dry or subatmospheric containments. DCH is considered resolved if the conditional containment failure probability (CCFP) is less than 0.1. The methodology calls for an initial screening phase in which the CCFP for each plant is calculated based on loads versus strength evaluations using plant-specific information. The DCH issue is considered resolved for a plant if the CCFP calculated in the screening phase is less than 0.01. This value is more stringent than the overall success criterion of 0.1. The CCFPs for all of the Westinghouse plants with dry containments were less than 0.01 in the screening phase calculations, and thus, the DCH issue is resolved for these plants based on containment loads alone. No additional analyses are required.

  6. 7 CFR 201.42 - Small containers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Small containers. 201.42 Section 201.42 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS Sampling in the Administration of the Act § 201.42 Small containers. In sampling seed in...

  7. 21 CFR 606.121 - Container label.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... color scheme may be used for differentiating ABO Blood groups: Blood group Color of label O Blue A... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Additional Labeling Standards for Blood and Blood Components § 606.121 Container label. (a) The container label requirements are designed...

  8. 21 CFR 606.121 - Container label.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Finished Product Control § 606.121... container label for blood and blood components (except Source Plasma) by all blood establishments. (b) The... information required to identify accurately the contents of a container after blood components have...

  9. 40 CFR 264.1086 - Standards: Containers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... material in the container, or when a worker needs to open a manhole hatch to access equipment inside...

  10. 40 CFR 265.1087 - Standards: Containers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... hatch to access equipment inside the container. Following completion of the activity, the owner...

  11. 40 CFR 265.1087 - Standards: Containers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... hatch to access equipment inside the container. Following completion of the activity, the owner...

  12. 40 CFR 264.1086 - Standards: Containers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... material in the container, or when a worker needs to open a manhole hatch to access equipment inside...

  13. 40 CFR 265.1087 - Standards: Containers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... hatch to access equipment inside the container. Following completion of the activity, the owner...

  14. 40 CFR 264.1086 - Standards: Containers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... material in the container, or when a worker needs to open a manhole hatch to access equipment inside...

  15. 40 CFR 265.1087 - Standards: Containers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... hatch to access equipment inside the container. Following completion of the activity, the owner...

  16. 40 CFR 264.1086 - Standards: Containers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... materials to minimize exposure of the hazardous waste to the atmosphere and to maintain the equipment... hatch to access equipment inside the container. Following completion of the activity, the owner or... material in the container, or when a worker needs to open a manhole hatch to access equipment inside...

  17. 40 CFR 61.345 - Standards: Containers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the container is maintained at a pressure less than atmospheric pressure, the owner or operator may... year by methods specified in § 61.355(h); and (iii) The pressure is monitored continuously to ensure that the pressure in the container remains below atmospheric pressure. (b) Each cover and all...

  18. 40 CFR 61.345 - Standards: Containers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the container is maintained at a pressure less than atmospheric pressure, the owner or operator may... year by methods specified in § 61.355(h); and (iii) The pressure is monitored continuously to ensure that the pressure in the container remains below atmospheric pressure. (b) Each cover and all...

  19. 40 CFR 61.345 - Standards: Containers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... the container is maintained at a pressure less than atmospheric pressure, the owner or operator may... year by methods specified in § 61.355(h); and (iii) The pressure is monitored continuously to ensure that the pressure in the container remains below atmospheric pressure. (b) Each cover and all...

  20. 40 CFR 61.345 - Standards: Containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the container is maintained at a pressure less than atmospheric pressure, the owner or operator may... year by methods specified in § 61.355(h); and (iii) The pressure is monitored continuously to ensure that the pressure in the container remains below atmospheric pressure. (b) Each cover and all...

  1. 40 CFR 61.345 - Standards: Containers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the container is maintained at a pressure less than atmospheric pressure, the owner or operator may... year by methods specified in § 61.355(h); and (iii) The pressure is monitored continuously to ensure that the pressure in the container remains below atmospheric pressure. (b) Each cover and all...

  2. 7 CFR 58.514 - Container fillers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Container fillers. 58.514 Section 58.514 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....514 Container fillers. Shall comply with the 3-A Sanitary Standards for Equipment for Packaging...

  3. Corrosion assessment of dry fuel storage containers

    SciTech Connect

    Graves, C.E.

    1994-09-01

    The structural stability as a function of expected corrosion degradation of 75 dry fuel storage containers located in the 200 Area Low-Level Waste Burial Grounds was evaluated. These containers include 22 concrete burial containers, 13 55-gal (208-l) drums, and 40 Experimental Breeder Reactor II (EBR-II) transport/storage casks. All containers are buried beneath at least 48 in. of soil and a heavy plastic tarp with the exception of 35 of the EBR-II casks which are exposed to atmosphere. A literature review revealed that little general corrosion is expected and pitting corrosion of the carbon steel used as the exterior shell for all containers (with the exception of the concrete containers) will occur at a maximum rate of 3.5 mil/yr. Penetration from pitting of the exterior shell of the 208-l drums and EBR-II casks is calculated to occur after 18 and 71 years of burial, respectively. The internal construction beneath the shell would be expected to preclude containment breach, however, for the drums and casks. The estimates for structural failure of the external shells, large-scale shell deterioration due to corrosion, are considerably longer, 39 and 150 years respectively for the drums and casks. The concrete burial containers are expected to withstand a service life of 50 years.

  4. 7 CFR 51.911 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Container. 51.911 Section 51.911 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Table Grapes (European or Vinifera Type) 1 Definitions § 51.911 Container....

  5. 7 CFR 51.911 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Container. 51.911 Section 51.911 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Table Grapes (European or Vinifera Type) 1 Definitions § 51.911 Container....

  6. Containment Prospectus for the PIANO Experiment

    SciTech Connect

    Burkhard, N R

    2001-03-23

    PIANO is a dynamic, subcritical, zero-yield experiment intended for execution in the U1a.102C drift of the U1a complex at the Nevada Test Site (NTS) (Figure 1). The data from the PIANO experiment will be used in the Stockpile Stewardship Program to assess the aging of nuclear weapon components and to better model the long-term performance of the weapons in the enduring stockpile. The PIANO experiment is composed of one experimental package. The experimental package will have high explosive (HE) and special nuclear material (SNM) in a subcritical assembly. The containment plan for the PIANO series of experiments utilizes a two-containment-vessel concept. The first Containment vessel is formed by the primary containment barrier that seals the U1a.102C drift. The second containment vessel is formed by the secondary containment barrier in the U100 drift. The PIANO experiment is the final experiment to be conducted in the U1a.102C alcove. It will be an ''open'' experiment--meaning that PIANO will not utilize a confinement vessel as the previous OBOE experiments in this alcove did. We expect that the SNM from the PIANO experiment will be fully contained within the first containment vessel.

  7. 46 CFR 160.021-6 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... respect. Open the container, remove the contents, insert colored blotting paper as a lining, re-close... additional marking which might cause confusion as to the contents shall be permitted. The vessel's name ordinarily is painted or branded on equipment such as this container, and nothing in this subpart shall...

  8. 21 CFR 610.60 - Container label.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Container label. 610.60 Section 610.60 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.60 Container label. (a) Full label....

  9. Rat pro-opiomelanocortin contains sulfate

    SciTech Connect

    Hoshina, H.; Hortin, G.; Boime, I.

    1982-07-02

    Intermediate lobes isolated from rat pituitary glands incorporated (/sup 35/S)sulfate into pro-opiomelanocortin and other adrenocorticotropic hormone-containing peptides. Incubation of intermediate lobes in medium containing the arginine analog canavanine inhibited the cleavage of pro-opiomelanocortin into smaller products. Pro-opiomelanocortin that accumulated in the presence of canavanine was also sulfated.

  10. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container,...

  11. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... on the outside. The can shall be made of 1.25-pound coating coke tin-plate throughout, with not less.... The interior of the container shall be uncoated, except for the tin-plating required by paragraph (a) of this section. In addition to the tin-plating, the exterior surfaces of the container,...

  12. Containment system for supercritical water oxidation reactor

    DOEpatents

    Chastagner, Philippe

    1994-01-01

    A system for containment of a supercritical water oxidation reactor in the event of a rupture of the reactor. The system includes a containment for housing the reaction vessel and a communicating chamber for holding a volume of coolant, such as water. The coolant is recirculated and sprayed to entrain and cool any reactants that might have escaped from the reaction vessel. Baffles at the entrance to the chamber prevent the sprayed coolant from contacting the reaction vessel. An impact-absorbing layer is positioned between the vessel and the containment to at least partially absorb momentum of any fragments propelled by the rupturing vessel. Remote, quick-disconnecting fittings exterior to the containment, in cooperation with shut-off valves, enable the vessel to be isolated and the system safely taken off-line. Normally-closed orifices throughout the containment and chamber enable decontamination of interior surfaces when necessary.

  13. Containment system for supercritical water oxidation reactor

    DOEpatents

    Chastagner, P.

    1994-07-05

    A system is described for containment of a supercritical water oxidation reactor in the event of a rupture of the reactor. The system includes a containment for housing the reaction vessel and a communicating chamber for holding a volume of coolant, such as water. The coolant is recirculated and sprayed to entrain and cool any reactants that might have escaped from the reaction vessel. Baffles at the entrance to the chamber prevent the sprayed coolant from contacting the reaction vessel. An impact-absorbing layer is positioned between the vessel and the containment to at least partially absorb momentum of any fragments propelled by the rupturing vessel. Remote, quick-disconnecting fittings exterior to the containment, in cooperation with shut-off valves, enable the vessel to be isolated and the system safely taken off-line. Normally-closed orifices throughout the containment and chamber enable decontamination of interior surfaces when necessary. 2 figures.

  14. Nuclear Power Plant Containment Pressure Boundary Research

    SciTech Connect

    Cherry, J.L.; Chokshi, N.C.; Costello, J.F.; Ellingwood, B.R.; Naus, D.J.

    1999-09-15

    Research to address aging of the containment pressure boundary in light-water reactor plants is summarized. This research is aimed at understanding the significant factors relating occurrence of corrosion, efficacy of inspection, and structural capacity reduction of steel containment and liners of concrete containment. This understanding will lead to improvements in risk-informed regulatory decision making. Containment pressure boundary components are described and potential aging factors identified. Quantitative tools for condition assessments of aging structures to maintain an acceptable level of reliability over the service life of the plant are discussed. Finally, the impact of aging (i.e., loss of shell thickness due to corrosion) on steel containment fragility for a pressurized water reactor ice-condenser plant is presented.

  15. Selection of 3013 Containers for Field Surveillance

    SciTech Connect

    Larry Peppers, Elizabeth Kelly, James McClard, Gary Friday, Theodore Venetz, and Jerry Stakebade

    2007-01-01

    This report revises and combines three earlier reports dealing with the binning, statistical sampling, and sample selection of 3013 containers for field surveillance. It includes changes to the binning specification resulting from completion of the Savannah River Site packaging campaign and new information from the shelf-life program and field surveillance activities. The revised bin assignments result in changes to the random sample specification. These changes are necessary to meet the statistical requirements of the surveillance program. This report will be reviewed regularly and revised as needed. Section 1 of this report summarizes the results of an extensive effort to assign all of the current and projected 3013 containers in the Department of Energy (DOE) inventory to one of three bins (Innocuous, Pressure and Corrosion, or Pressure) based on potential failure mechanisms. Grouping containers into bins provides a framework to make a statistical selection of individual containers from the entire population for destructive and nondestructive field surveillance. The binning process consisted of three main steps. First, the packaged containers were binned using information in the Integrated Surveillance Program database and a decision tree. The second task was to assign those containers that could not be binned using the decision tree to a specific bin using container-by-container engineering review. The final task was to evaluate containers not yet packaged and assign them to bins using process knowledge. The technical basis for the decisions made during the binning process is included in Section 1. A composite decision tree and a summary table show all of the containers projected to be in the DOE inventory at the conclusion of packaging at all sites. Decision trees that provide an overview of the binning process and logic are included for each site. Section 2 of this report describes the approach to the statistical selection of containers for surveillance and

  16. Container Refurbishment Cycle Time Reduction (CTR) Project

    SciTech Connect

    Aloi, t.; anthony, p; blair, t; forester, c; hall, k; hawk, t; gordon, b; johnsen, s; keck, g; clifford, m; reichert, d; rogers, p; richards, w; smallen, p; tilley, e

    2000-05-15

    In mid-1999, a Cycle Time Reduction (CTR) project was initiated by senior management to improve the overall efficiency of the Container Refurbishment process. A cross-functional team was formed by the Industrial Engineering Services group within Product Certification Organization to evaluate the current process and to propose necessary changes for improvement. The CTR team efforts have resulted in increased productivity equaling approximately $450K per year. The effort also significantly reduced the wait time required necessary to start assembly work on the shop floor. Increasing daily production time and identifying delays were key team goals. Following is a brief summary of accomplishments: (A) Productivity Improvements: (1) Reduced Radcon survey time for empty containers: (i) 50% at 9720-3 (ii) 67% at 9204-2 and (iii) 100% at 9212; (2) Eliminated container inspections at 9720-3; (3) Reduced charged time (includes hands-on labor and support functions) per empty container by 25%; (4) Reduced cycle time to refurbish a container by 25%. (Dramatic wait time reduction -Assembly); (5) Reduced the time for 9212 to receive empty, refurbished containers by 67-80%; (6) Reduced the time for 9204-2E to receive empty, refurbished containers from 1 day to immediate; (7) Implemented software to track time charged per container for continuous improvement; (8) Initiated continuous improvement efforts between Workstream experts and Refurbishment personnel, reworded complex Workstream prompts to allow worker data corrections, and reduces time of support groups, Workstream personnel, and Refurbishment personnel; (9) Consolidated refurbished, container warehousing areas, eliminated long travel times to areas outside the protected area portals to an area in the vicinity of the refurbishment area and a process area, benefits are improved container flow and better housekeeping; and (10) improved overall communication of team by flowcharting entire process. B. Annual Cost Savings: $453K

  17. Studies of sulphur containing model interstellar ices

    NASA Astrophysics Data System (ADS)

    Brown, W. A.; Burke, D. J.; Edridge, J. L.

    2011-05-01

    Sulphur bearing species have long been proposed as good evolutionary tracers of star forming regions. The abundance of sulphur containing molecules varies by large amounts during the evolution of a proto-star and hence astronomical models are very sensitive to the amount of sulphur present and to its chemical composition. Interstellar observations have identified a range of sulphur containing species including SO, SO2, H2S, CS and OCS (amongst others). To try to understand the role of sulphur containing species in interstellar ices, we have undertaken a detailed investigation of the adsorption and desorption of a range of sulphur-containing model ices on a carbonaceous dust grain analogue surface (graphite) held at 14 K. Ices consisting of pure sulphur-containing molecules, sulphur-containing molecules adsorbed on top of amorphous solid water ice, mixed ices containing water ices and sulphur-species, all adsorbed on graphite, have been investigated. Ultra-high vacuum techniques have been used to model the low pressure conditions of interstellar space and a combination of surface infrared spectroscopy (RAIRS - reflection absorption infrared spectroscopy) and temperature programmed desorption (TPD) have been used to investigate the behaviour of the ices.

  18. CLOSURE WELD DEVELOPMENT FOR 3013 OUTER CONTAINERS

    SciTech Connect

    Daugherty, W.; Howard, S.; Peterson, K.; Stokes, M.

    2009-11-10

    Excess plutonium materials in the DOE complex are packaged and stored in accordance with DOE-STD-3013. This standard specifies requirements for the stabilization of such materials and subsequent packaging in dual nested seal-welded containers. Austenitic stainless steels have been selected for container fabrication. The inner 3013 container provides contamination control while the outer 3013 container is the primary containment vessel and is the focus of this paper. Each packaging site chose a process for seal welding the outer 3013 containers in accordance with its needs and expertise. The two processes chosen for weld closure were laser beam welding (LBW) and gas tungsten arc welding (GTAW). Following development efforts, each system was qualified in accordance with DOE-STD-3013 prior to production use. The 3013 outer container closure weld joint was designed to accommodate the characteristics of a laser weld. This aspect of the joint design necessitated some innovative process and equipment considerations in the application of the GTAW process. Details of the weld requirements and the development processes are presented and several potential enhancements for the GTAW system are described.

  19. Resolution of the direct containment heating issue for all Westinghouse plants with large dry containments or subatmospheric containments

    SciTech Connect

    Pilch, M.M.; Allen, M.D.; Klamerus, E.W.

    1996-02-01

    This report uses the scenarios described in NUREG/CR-6075 and NUREG/CR-6075, Supplement 1, to address the direct containment heating (DCH) issue for all Westinghouse plants with large dry or subatmospheric containments. DCH is considered resolved if the conditional containment failure probability (CCFP) is less than 0.1. Loads versus strength evaluations of the CCFP were performed for each plant using plant-specific information. The DCH issue is considered resolved for a plant if a screening phase results in a CCFP less than 0.01, which is more stringent than the overall success criterion. If the screening phase CCFP for a plant is greater than 0.01, then refined containment loads evaluations must be performed and/or the probability of high pressure at vessel breach must be analyzed. These analyses could be used separately or could be integrated together to recalculate the CCFP for an individual plant to reduce the CCFP to meet the overall success criterion of less than 0.1. The CCFPs for all of the Westinghouse plants with dry containments were less than 0.01 at the screening phase, and thus, the DCH issue is resolved for these plants based on containment loads alone. No additional analyses are required.

  20. Material development for fan blade containment casing

    NASA Astrophysics Data System (ADS)

    McMillan, A.

    2008-03-01

    This paper describes the physics reasoning and the engineering development process for the structured material system adopted for the containment system of the Trent 900 engine. This is the Rolls-Royce engine that powers the Airbus A380 double-decker aeroplane, which is on the point of entering service. The fan blade containment casing is the near cylindrical casing that surrounds the fan blades at the front of the engine. The fan blades provide the main part of the thrust of the engine; the power to the fan is provided through a shaft from the turbine. The fan is approximately three meters in diameter, with the tips of the blade travelling at a little over Mach speed. The purpose of the containment system is to catch and contain a blade in the extremely unlikely event of a part or whole blade becoming detached. This is known as a ''Fan Blade Off (FBO)'' event. The requirement is that no high-energy fragments should escape the containment system; this is essential to prevent damage to other engines or to the fuselage of the aircraft. Traditionally the containment system philosophy has been to provide a sufficiently thick solid metallic skin that the blade cannot penetrate. Obviously, this is heavy. A good choice of metal in this case is a highly ductile steel, which arrests the kinetic energy of the blade through plastic deformation, and possibly, a controlled amount of cracking. This is known as ''hard wall'' containment. More recently, to reduce weight, containment systems have incorporated a Kevlar fibre wrap. In this case, the thinner metallic wall provides some containment, which is backed up by the stretching of the Kevlar fibres. This is known as ''soft wall'' containment; but it suffers the disadvantage of requiring a large empty volume in the nacelle in to which to expand. For the Trent 900 engine, there was a requirement to make a substantial weight saving while still adopting a hard wall style of containment system. To achieve this, a hollow structured

  1. Radon free storage container and method

    DOEpatents

    Langner, Jr., G. Harold; Rangel, Mark J.

    1991-01-01

    A radon free containment environment for either short or long term storage of radon gas detectors can be provided as active, passive, or combined active and passive embodiments. A passive embodiment includes a resealable vessel containing a basket capable of holding and storing detectors and an activated charcoal adsorbing liner between the basket and the containment vessel wall. An active embodiment includes the resealable vessel of the passive embodiment, and also includes an external activated charcoal filter that circulates the gas inside the vessel through the activated charcoal filter. An embodiment combining the active and passive embodiments is also provided.

  2. Preparation of Hemoglobin-Containing Microcapsules.

    DTIC Science & Technology

    1982-04-01

    L -i2 801 PREPARRTION OF HEMOGLOBIN-CONTAINING MICROCAPSULES (U) i/i I SRI INTERNATIONAL MENLO PRK CA Z REYES APR 82 UNLSSFE SRI1-2254-2 DRMDi,7-8@-C...R oI• _ AD I PREPARATION OF HEMOGLOBIN- /2 o ) CONTAINING MICROCAPSULES . 00 ANNUAL AND FINAL REPORT ZOILA REYES, Ph.D. APRIL 1982 Supported by U.S...1/31/82) PREPARATION OF HEMOGLOBIN-CONTAINING MICROCAPSULES 6. PERFORMING ORG. REPOR’ NUMBER 2254-2 7. AUTHOR(s) 8. CONTRACT OR GRANT NUMBER(s) Zoila

  3. Simplified dynamic buckling assessment of steel containments

    SciTech Connect

    Farrar, C.R.; Duffey, T.A.; Renick, D.H.

    1993-02-01

    A simplified, three-degree-of-freedom analytical procedure for performing a response spectrum buckling analysis of a thin containment shell is developed. Two numerical examples with R/t values which bound many existing steel containments are used to illustrate the procedure. The role of damping on incipient buckling acceleration level is evaluated for a regulatory seismic spectrum using the two numerical examples. The zero-period acceleration level that causes incipient buckling in either of the two containments increases 31% when damping is increased from 1% to 4% of critical. Comparisons with finite element results on incipient buckling levels are favorable.

  4. Reducibility of Matrix Equations Containing Several Parameters.

    DTIC Science & Technology

    1981-12-01

    AD-AI15 568 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO;-ETC EF G 12 1ADA1551 REDUCIBILITY OF MATRIX EQUATIONS CONTAINING SEVERAL...PARAMETERS.E U)CA E UNCLASSIFIED AFIT/GE/RA/81D-1 N P11111111II soonhh Eu;o I. ’Trm * a, ~t- NMI 4 i’- 00Nt. met r~ REDUCIBILITY OF MATRIX EQUATIONS CONTAINING...1 REDUCIBILITY OF MATRIX EQUATIONS CONTAINING SEVERAL PARAMETERS THESIS Presented to the Faculty of the School of Engineering of the Air Force

  5. IP-RFID Based Container Monitoring System

    NASA Astrophysics Data System (ADS)

    Choi, Hyung-Rim; Park, Byung-Kwon; Park, Yong-Sung; Lee, Chang-Sup; Park, Chang-Hyun

    RFID technology in container management field is considered for increasing productivity and efficiency in logistics industry. But there are a lot of problems caused by inappropriate application of RFID technology in shipping logistics. Therefore, technology development based on IP is needed for accepting diverse technology applied before and offering better service to develop container management technology involved with RFID. In this study, realtime container monitoring system using IP-RFID is designed and implemented for supplementing weakness of information gathering using existing RFID and transferring data in real time to user.

  6. Corrosion resistant storage container for radioactive material

    DOEpatents

    Schweitzer, Donald G.; Davis, Mary S.

    1990-01-01

    A corrosion resistant long-term storage container for isolating radioactive waste material in a repository. The container is formed of a plurality of sealed corrosion resistant canisters of different relative sizes, with the smaller canisters housed within the larger canisters, and with spacer means disposed between judxtaposed pairs of canisters to maintain a predetermined spacing between each of the canisters. The combination of the plural surfaces of the canisters and the associated spacer means is effective to make the container capable of resisting corrosion, and thereby of preventing waste material from leaking from the innermost canister into the ambient atmosphere.

  7. Corrosion resistant storage container for radioactive material

    DOEpatents

    Schweitzer, D.G.; Davis, M.S.

    1984-08-30

    A corrosion resistant long-term storage container for isolating high-level radioactive waste material in a repository is claimed. The container is formed of a plurality of sealed corrosion resistant canisters of different relative sizes, with the smaller canisters housed within the larger canisters, and with spacer means disposed between juxtaposed pairs of canisters to maintain a predetermined spacing between each of the canisters. The combination of the plural surfaces of the canisters and the associated spacer means is effective to make the container capable of resisting corrosion, and thereby of preventing waste material from leaking from the innermost canister into the ambient atmosphere.

  8. Radiation monitoring container device (16-IML-1)

    NASA Technical Reports Server (NTRS)

    Nagaoka, S.

    1992-01-01

    In this experiment, layers of radiation detectors and biological specimens, bacterial spores (Bacillus subtillis), shrimp eggs (Altemia salina), and maize seeds (Zea mays) are sandwiched together in the Radiation Monitoring Container. The detectors, sheets of plastic materials, record the nuclear track of cosmic radiation. The dosimeter package contains conventional detectors made of materials such as lithium fluoride or magnesium-silica-terbium. The thermoluminescent materials (TLD) will, when moderately heated, emit luminescent photons linearly depending upon the dose of radiation received. The experiment, enclosed in a box-like container, is mounted on the aft end cone of the Spacelab, the area where the shielding is somewhat less than other locations.

  9. Super-hydrophobic fluorine containing aerogels

    DOEpatents

    Coronado, Paul R.; Poco, John F.; Hrubesh, Lawrence W.

    2007-05-01

    An aerogel material with surfaces containing fluorine atoms which exhibits exceptional hydrophobicity, or the ability to repel liquid water. Hydrophobic aerogels are efficient absorbers of solvents from water. Solvents miscible with water are separated from it because the solvents are more volatile than water and they enter the porous aerogel as a vapor across the liquid water/solid interface. Solvents that are immisicble with water are separated from it by selectively wetting the aerogel. The hydrophobic property is achieved by formulating the aerogel using fluorine containing molecules either directly by addition in the sol-gel process, or by treating a standard dried aerogel using the vapor of fluorine containing molecules.

  10. Uncertainties in container failure time predictions

    SciTech Connect

    Williford, R.E.

    1990-01-01

    Stochastic variations in the local chemical environment of a geologic waste repository can cause corresponding variations in container corrosion rates and failure times, and thus in radionuclide release rates. This paper addresses how well the future variations in repository chemistries must be known in order to predict container failure times that are bounded by a finite time period within the repository lifetime. Preliminary results indicate that a 5000 year scatter in predicted container failure times requires that repository chemistries be known to within {plus minus}10% over the repository lifetime. These are small uncertainties compared to current estimates. 9 refs., 3 figs.

  11. Passive containment cooling water distribution device

    DOEpatents

    Conway, Lawrence E.; Fanto, Susan V.

    1994-01-01

    A passive containment cooling system for a nuclear reactor containment vessel. Disclosed is a cooling water distribution system for introducing cooling water by gravity uniformly over the outer surface of a steel containment vessel using a series of radial guide elements and cascading weir boxes to collect and then distribute the cooling water into a series of distribution areas through a plurality of cascading weirs. The cooling water is then uniformly distributed over the curved surface by a plurality of weir notches in the face plate of the weir box.

  12. Electrically Conductive Polyimide Films Containing Gold Surface

    NASA Technical Reports Server (NTRS)

    Caplan, Maggie L.; Stoakley, Diane M.; St. Clair, Anne K.

    1994-01-01

    Polyimide films exhibiting high thermo-oxidative stability and including electrically conductive surface layers containing gold made by casting process. Many variations of basic process conditions, ingredients, and sequence of operations possible, and not all resulting versions of process yield electrically conductive films. Gold-containing layer formed on film surface during cure. These metallic gold-containing polyimides used in film and coating applications requiring electrical conductivity, high reflectivity, exceptional thermal stability, and/or mechanical integrity. They also find commercial potential in areas ranging from thin films for satellite antennas to decorative coatings and packaging.

  13. Asbestos-Containing Materials (ACM) and Demolition

    EPA Pesticide Factsheets

    There are specific federal regulatory requirements that require the identification of asbestos-containing materials (ACM) in many of the residential buildings that are being demolished or renovated by a municipality.

  14. Heat pipes containing alkali metal working fluid

    NASA Technical Reports Server (NTRS)

    Morris, J. F. (Inventor)

    1981-01-01

    A technique for improving high temperature evaporation-condensation heat-transfer devices which have important and unique advantage in terrestrial and space energy processing is described. The device is in the form of a heat pipe comprising a sealed container or envelope which contains a capillary wick. The temperature of one end of the heat pipe is raised by the input of heat from an external heat source which is extremely hot and corrosive. A working fluid of a corrosive alkali metal, such as lithium, sodium, or potassium transfers this heat to a heat receiver remote from the heat source. The container and wick are fabricated from a superalloy containing a small percentage of a corrosion inhibiting or gettering element. Lanthanum, scandium, yttrium, thorium, and hafnium are utilized as the alloying metal.

  15. Design and development of diborane shipping container

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The design, development, and tests of a 200 pound container for the shipment of liquid diborane are reported. A record of the correspondence with the DOT to obtain a permit for liquid diborane shipment is presented.

  16. Mercury-Containing Devices and Demolition

    EPA Pesticide Factsheets

    Some items inside residential buildings contain mercury, which poses a persistent and toxic human health and environmental threat. These materials should be carefully salvaged for proper recycling to prevent mercury contamination prior to demolition.

  17. Conversion of asphaltene-containing charge stocks

    SciTech Connect

    Conner, A.J.; Hutchings, L.E.

    1982-11-09

    A process is claimed for the conversion of an asphaltene-containing, hydrocarbonaceous black oil in a catalytic slurry reaction zone wherein an admixture of converted hydrocarbonaceous oil and unconverted asphaltenes is recycled to the reaction zone.

  18. Electrically conductive palladium containing polyimide films

    NASA Technical Reports Server (NTRS)

    Taylor, L. T.; St.clair, A. K.; Carver, V. C.; Furtsch, T. A. (Inventor)

    1982-01-01

    Lightweight, high temperature resistant, electrically conductive, palladium containing polyimide films and methods for their preparation are described. A palladium (II) ion-containing polyamic acid solution is prepared by reacting an aromatic dianhydride with an equimolar quantity of a palladium II ion-containing salt or complex and the reactant product is cast as a thin film onto a surface and cured at approximately 300 C to produce a flexible electrically conductive cyclic palladium containing polyimide. The source of palladium ions is selected from the group of palladium II compounds consisting of LiPdCl4, PdS(CH3)2Cl2Na2PdCl4, and PdCl2. The films have application to aerodynamic and space structures and in particular to the relieving of space charging effects.

  19. Remotely controlled large container disposal methodology

    SciTech Connect

    Amir, S.J.

    1994-09-01

    Remotely Handled Large Containers (RHLC), also called drag-off boxes, have been used at the Hanford Site since the 1940s to dispose of large pieces of radioactively contaminated equipment. These containers are typically large steel-reinforced concrete boxes, which weigh as much as 40 tons. Because large quantities of high-dose waste can produce radiation levels as high as 200 mrem/hour at 200 ft, the containers are remotely handled (either lifted off the railcar by crane or dragged off with a cable). Many of the existing containers do not meet existing structural and safety design criteria and some of the transportation requirements. The drag-off method of pulling the box off the railcar using a cable and a tractor is also not considered a safe operation, especially in view of past mishaps.

  20. Planned Change Request for Shielded Containers

    EPA Pesticide Factsheets

    The U.S. Department of Energy (DOE) is proposing to package and emplace a portion of the Remote Handled (RH) Transuranic (TRU) Waste inventory in shielded containers at the Waste Isolation Pilot Plant.

  1. Self-Lubricating Composite Containing Chromium Oxide

    NASA Technical Reports Server (NTRS)

    Dellacorte, Christopher (Inventor); Edmonds, Brian J. (Inventor)

    1999-01-01

    A self lubricating. friction and wear reducing composite material useful over a wide temperature range of from cryogenic temperature up to about 900 C. contains 60 80 wt. % of particulate Cr2O3, dispersed in a metal binder of a metal alloy containing Cr and at least 50 wt. % of Ni, Cr or a mature of Ni and Cr. It also contains 5-20 wt. % of a fluoride of at least one Group I, Group II or rare earth metal and. optionally, 5-20 wt. % of a low temperature lubricant metal, such as Ag. Au, Pt, Pd, Rh and Cu. This composite exhibits less oxidation instability and less abrasiveness than composites containing chromium carbide, is readily applied using plasma spray and can be ground and polished with a silicon carbide abrasive.

  2. Radiation shielding materials and containers incorporating same

    DOEpatents

    Mirsky, Steven M.; Krill, Stephen J.; Murray, Alexander P.

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound ("PYRUC") shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  3. Radiation Shielding Materials and Containers Incorporating Same

    DOEpatents

    Mirsky, Steven M.; Krill, Stephen J.; and Murray, Alexander P.

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound (''PYRUC'') shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  4. Abatement of Marine Coatings Containing Heavy Metals

    DTIC Science & Technology

    1995-06-01

    in the abatement of heavy metal containing marine coatings. Funding for this...shipyards to be proactive in the area of heavy metal coating systems abatement as current regulations were not "user friendly" in shipboard applications.

  5. Enzyme Reactions in Nanoporous, Picoliter Volume Containers

    SciTech Connect

    Siuti, Piro; Retterer, Scott T; Choi, Chang Kyoung; Doktycz, Mitchel John

    2012-01-01

    Advancements in nanoscale fabrication allow creation of small volume reaction containers that can facilitate the screening and characterization of enzymes. A porous, ~19 pL volume vessel has been used in this work to carry out enzyme reactions under varying substrate concentrations. Glucose oxidase and horseradish peroxidase can be contained in these structures and diffusively fed with a solution containing glucose and the fluorogenic substrate Amplex Red through the engineered nanoscale pore structure. Fluorescent microscopy was used to monitor the reaction, which was carried out under microfluidic control. Kinetic characteristics of the enzyme were evaluated and compared with results from conventional scale reactions. These picoliter, nanoporous containers can facilitate quick determination of enzyme kinetics in microfluidic systems without the requirement of surface tethering and can be used for applications in drug discovery, clinical diagnostics and high-throughput screening.

  6. Fire-Resistant Polyimides Containing Phosphorus

    NASA Technical Reports Server (NTRS)

    Mikroyannidis, J.

    1986-01-01

    Limiting oxygen index increased. Copolyimide with a group containing phosphorus synthesized from 1-2,4-diaminobenzene, m-phenylenediamine, and tetracarboxylic dianhydride. Copolymer more fire resistant than corresponding polyimide without phosphorus.

  7. Structural response of rectilinear containment to overpressurization

    SciTech Connect

    Pfeiffer, P.A.; Kulak, R.F.

    1995-07-01

    Containment structures for nuclear reactors are the final barrier between released radionuclides and the public. Containment structures are constructed from steel, reinforced concrete, or prestressed concrete. US nuclear reactor containment geometries tend to be cylindrical with elliptical or hemispherical heads. The older Soviet designed reactors do not use a containment building to mitigate the effects of accidents. Instead, they employ a sealed set of rectilinear, interconnected compartments, collectively called the accident localization system (ALS), to reduce the release of radionuclides to the atmosphere during accidents. The purpose of this paper is to present a methodology that can be used to find the structural capacity of reinforced concrete structures. The method is applicable to both cylindrical and rectilinear geometries. As an illustrative example, the methodology is applied to a generic VVER-440/V213 design.

  8. 7 CFR 160.32 - Marking containers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... interested person shall provide any labor necessary for marking the containers, after the contents have...

  9. Composite construction for nuclear fuel containers

    DOEpatents

    Cheng, Bo-Ching [Fremont, CA; Rosenbaum, Herman S [Fremont, CA; Armijo, Joseph S [Saratoga, CA

    1987-01-01

    An improved method for producing nuclear fuel containers of a composite construction having components providing therein a barrier system for resisting destructive action by volatile fission products or impurities and also interdiffusion of metal constituents, and the product thereof. The composite nuclear fuel containers of the method comprise a casing of zirconium or alloy thereof with a layer of copper overlying an oxidized surface portion of the zirconium or alloy thereof.

  10. 1994 Solid waste forecast container volume summary

    SciTech Connect

    Templeton, K.J.; Clary, J.L.

    1994-09-01

    This report describes a 30-year forecast of the solid waste volumes by container type. The volumes described are low-level mixed waste (LLMW) and transuranic/transuranic mixed (TRU/TRUM) waste. These volumes and their associated container types will be generated or received at the US Department of Energy Hanford Site for storage, treatment, and disposal at Westinghouse Hanford Company`s Solid Waste Operations Complex (SWOC) during a 30-year period from FY 1994 through FY 2023. The forecast data for the 30-year period indicates that approximately 307,150 m{sup 3} of LLMW and TRU/TRUM waste will be managed by the SWOC. The main container type for this waste is 55-gallon drums, which will be used to ship 36% of the LLMW and TRU/TRUM waste. The main waste generator forecasting the use of 55-gallon drums is Past Practice Remediation. This waste will be generated by the Environmental Restoration Program during remediation of Hanford`s past practice sites. Although Past Practice Remediation is the primary generator of 55-gallon drums, most waste generators are planning to ship some percentage of their waste in 55-gallon drums. Long-length equipment containers (LECs) are forecasted to contain 32% of the LLMW and TRU/TRUM waste. The main waste generator forecasting the use of LECs is the Long-Length Equipment waste generator, which is responsible for retrieving contaminated long-length equipment from the tank farms. Boxes are forecasted to contain 21% of the waste. These containers are primarily forecasted for use by the Environmental Restoration Operations--D&D of Surplus Facilities waste generator. This waste generator is responsible for the solid waste generated during decontamination and decommissioning (D&D) of the facilities currently on the Surplus Facilities Program Plan. The remaining LLMW and TRU/TRUM waste volume is planned to be shipped in casks and other miscellaneous containers.

  11. System and method for liquid silicon containment

    SciTech Connect

    Cliber, James A; Clark, Roger F; Stoddard, Nathan G; Von Dollen, Paul

    2014-06-03

    This invention relates to a system and a method for liquid silicon containment, such as during the casting of high purity silicon used in solar cells or solar modules. The containment apparatus includes a shielding ember adapted to prevent breaching molten silicon from contacting structural elements or cooling elements of a casting device, and a volume adapted to hold a quantity of breaching molten silicon with the volume formed by a bottom and one or more sides.

  12. Costs and cost containment in nursing homes.

    PubMed Central

    Smith, H L; Fottler, M D

    1981-01-01

    The study examines the impact of structural and process variables on the cost of nursing home care and the utilization of various cost containment methods in 43 california nursing homes. Several predictors were statistically significant in their relation to cost per patient day. A diverse range of cost containment techniques was discovered along with strong predictors of the utilization of these techniques by nursing home administrators. The trade-off between quality of care and cost of care is discussed. PMID:7228713

  13. Subsurface materials management and containment system

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kostelnik, Kevin M.; Sloan, Paul A.

    2006-10-17

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  14. Subsurface materials management and containment system

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kosteinik, Kevin M.; Sloan, Paul A.

    2004-07-06

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  15. Lightweight Energy Absorbers for Blast Containers

    NASA Technical Reports Server (NTRS)

    Balles, Donald L.; Ingram, Thomas M.; Novak, Howard L.; Schricker, Albert F.

    2003-01-01

    Kinetic-energy-absorbing liners made of aluminum foam have been developed to replace solid lead liners in blast containers on the aft skirt of the solid rocket booster of the space shuttle. The blast containers are used to safely trap the debris from small explosions that are initiated at liftoff to sever frangible nuts on hold-down studs that secure the spacecraft to a mobile launch platform until liftoff.

  16. Container molecules based on imine type ligands.

    PubMed

    Schulze, A Carina; Oppel, Iris M

    2012-01-01

    This chapter will give a short overview about container molecules, their synthesis and possible applications. The main focus is on those which are based on imine type ligands. These containers can be used for example for guest exchange, gas separation, as chemical sensors or for the stabilisation of white phosphorus under water. The described cages have wide openings or tightly closed ones. For one cage the reversible opening and closing is also described.

  17. Microsphere coated substrate containing reactive aldehyde groups

    NASA Technical Reports Server (NTRS)

    Rembaum, Alan (Inventor); Yen, Richard C. K. (Inventor)

    1984-01-01

    A synthetic organic resin is coated with a continuous layer of contiguous, tangential, individual microspheres having a uniform diameter preferably between 100 Angstroms and 2000 Angstroms. The microspheres are an addition polymerized polymer of an unsaturated aldehyde containing 4 to 20 carbon atoms and are covalently bonded to the substrate by means of high energy radiation grafting. The microspheres contain reactive aldehyde groups and can form conjugates with proteins such as enzymes or other aldehyde reactive materials.

  18. Polyimides containing amide and perfluoroisopropylidene connecting groups

    NASA Technical Reports Server (NTRS)

    Dezern, James F. (Inventor)

    1993-01-01

    New, thermooxidatively stable polyimides were prepared from the reaction of aromatic dianhydrides containing isopropylidene bridging groups with aromatic diamines containing amide connecting groups between the rings. Several of these polyimides were shown to be semi-crystalline as evidenced by wide angle x ray scattering and differential scanning calorimetry. Most of the polyimides form tough, flexible films with high tensile properties. These polyimide films exhibit enhanced solubility in organic solvents.

  19. Laboratory Investigation of Containment of Underground Explosions.

    DTIC Science & Technology

    1983-12-01

    the mechanics of containing gases in cavities formed by underground nuclear explosions. One experimental technique uses constant flow rate...30 2.3 Containment Experiment Apparatus...........................31 2.4 Constant Flow -Rate Hydrofracture System ................... 32 2.5 Overall...charge size (3/8 gram PETN), overburden pressure [1000 psi (6.895 MPa). viscosity of the hydrofracture fluid (I centipoise), and rate of fluid 0 flow

  20. Personnel administration can act on cost containment.

    PubMed

    Adams, J

    1980-01-01

    Hosiptal personnel administration programs have the potential to contain costs in a variety of areas, including human resources management, payroll costs, benefits costs, labor turnover, and recruitment costs. Recognizing this, the Maine Society for Hospital Personnel Administration presented a seminar and prepared a guide for trustees and administrators on the role that personnel administration can play in the Voluntary Effort to contain costs. The following article is an adaptation of the information included in the seminar and guide.

  1. Intravenous iron-containing products: EMA procrastination.

    PubMed

    2014-07-01

    A European reassessment has led to identical changes in the summaries of product characteristics (SPCs) for all intravenous iron-containing products: the risk of serious adverse effects is now highlighted, underlining the fact that intravenous iron-containing products should only be used when the benefits clearly outweigh the harms. Unfortunately, iron dextran still remains on the market despite a higher risk of hypersensitivity reactions than with iron sucrose.

  2. Composite construction for nuclear fuel containers

    DOEpatents

    Cheng, B. C.; Rosenbaum, H. S.; Armijo, J. S.

    1987-04-21

    Disclosed is an improved method for producing nuclear fuel containers of a composite construction having components providing therein a barrier system for resisting destructive action by volatile fission products or impurities and also interdiffusion of metal constituents, and the product thereof. The composite nuclear fuel containers of the method comprise a casing of zirconium or alloy thereof with a layer of copper overlying an oxidized surface portion of the zirconium or alloy thereof. 1 fig.

  3. Aromatic Polyimides Containing Meta-Biphenoxy Moieties

    NASA Technical Reports Server (NTRS)

    St. Clair, Terry L.; Whitley, Karen S.; Pratt, John R.

    1994-01-01

    Synthesis of two novel monomers and subsequent incorporation into aromatic polyimides yields polyimides containing meta-biphenoxy moieties exhibiting stability at high temperatures and having glass-transition temperatures lower than state-of-the-art polyimides containing para-biphenoxy moieties. Because of outstanding thermal stability, low density, resistance to radiation, electrical-insulating capability, toughness, and flexibility, linear aromatic polyimides used increasingly for applications in aerospace and electronics industries and possibly in others.

  4. Lubricating oil containing VII pour depressant

    SciTech Connect

    Hart, W.P.; Mays, D.L.

    1986-08-19

    Lubricating oils for internal combustion engines typically contain a multitude of additives which function as detergents, dispersants, viscosity index improvers, pour depressants, etc. in order to improve the properties of the oil. It is found that it is particularly necessary to improve the properties exhibited by lubricating oil compositions at low temperatures. It is an object of this invention to provide a lubricating oil containing an additive which provides improved properties at low temperatures.

  5. 40 CFR 156.146 - Residue removal instructions for nonrefillable containers-rigid containers with dilutable...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable...

  6. 40 CFR 156.146 - Residue removal instructions for nonrefillable containers-rigid containers with dilutable...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable...

  7. 40 CFR 156.146 - Residue removal instructions for nonrefillable containers-rigid containers with dilutable...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable...

  8. 40 CFR 156.146 - Residue removal instructions for nonrefillable containers-rigid containers with dilutable...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable...

  9. 40 CFR 156.146 - Residue removal instructions for nonrefillable containers-rigid containers with dilutable...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... nonrefillable containers-rigid containers with dilutable pesticides. 156.146 Section 156.146 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS LABELING REQUIREMENTS FOR PESTICIDES AND DEVICES Container Labeling § 156.146 Residue removal instructions for nonrefillable...

  10. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... section, not including 49 CFR part 387, a rail car, freight container, truck body, or trailer in which the... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container... rail car, freight container, truck body, or trailer the FUMIGANT marking specified in paragraph (e)...

  11. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... section, not including 49 CFR part 387, a rail car, freight container, truck body, or trailer in which the... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container... rail car, freight container, truck body, or trailer the FUMIGANT marking specified in paragraph (e)...

  12. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... section, not including 49 CFR part 387, a rail car, freight container, truck body, or trailer in which the... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container... rail car, freight container, truck body, or trailer the FUMIGANT marking specified in paragraph (e)...

  13. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... section, not including 49 CFR part 387, a rail car, freight container, truck body, or trailer in which the... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container... rail car, freight container, truck body, or trailer the FUMIGANT marking specified in paragraph (e)...

  14. 49 CFR 173.9 - Transport vehicles or freight containers containing lading which has been fumigated.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... section, not including 49 CFR part 387, a rail car, freight container, truck body, or trailer in which the... hazardous material. (b) No person may offer for transportation or transport a rail car, freight container... rail car, freight container, truck body, or trailer the FUMIGANT marking specified in paragraph (e)...

  15. A Sample Return Container with Hermetic Seal

    NASA Technical Reports Server (NTRS)

    Kong, Kin Yuen; Rafeek, Shaheed; Sadick, Shazad; Porter, Christopher C.

    2000-01-01

    A sample return container is being developed by Honeybee Robotics to receive samples from a derivative of the Champollion/ST4 Sample Acquisition and Transfer Mechanism or other samplers and then hermetically seal samples for a sample return mission. The container is enclosed in a phase change material (PCM) chamber to prevent phase change during return and re-entry to earth. This container is designed to operate passively with no motors and actuators. Using the sampler's featured drill tip for interfacing, transfer-ring and sealing samples, the container consumes no electrical power and therefore minimizes sample temperature change. The circular container houses a few isolated canisters, which will be sealed individually for samples acquired from different sites or depths. The drill based sampler indexes each canister to the sample transfer position, below the index interface for sample transfer. After sample transfer is completed, the sampler indexes a seal carrier, which lines up seals with the openings of the canisters. The sampler moves to the sealing interface and seals the sample canisters one by one. The sealing interface can be designed to work with C-seals, knife edge seals and cup seals. Again, the sampler provides all sealing actuation. This sample return container and co-engineered sample acquisition system are being developed by Honeybee Robotics in collaboration with the JPL Exploration Technology program.

  16. Method and apparatus for container leakage testing

    DOEpatents

    Kronberg, James W.

    1995-01-01

    An apparatus for use in one-hundred percent leak testing of food containers used in conjunction with a tracer gas. The apparatus includes a shell with entrance and exit air locks to create a controlled atmosphere through which a series of containers is conveyed by a conveyor belt. The pressure in the shell is kept lower than the pressure in the containers and the atmosphere is made to flow with the containers so that a tracer gas placed in the packages before sealing them will leak more readily, but the leaked tracer gas will remain associated with the leaking package as it moves through the shell. The leaks are detected with a sniffer probe in fluid communication with a gas chromatograph. The gas chromatograph issues a signal when it detects a leak to an ejector that will eject the leaking container from the conveyor. The system is timed so that the series of containers can move continuously into and out of the shell, past the probe and the ejector, without stopping, yet each package is tested for leaks and removed if leaking.

  17. Latest generation of halogen-containing pesticides.

    PubMed

    Jeschke, Peter

    2017-02-01

    Agriculture is confronted with enormous challenges, from production of enough high-quality food to water use, environmental impacts and issues combined with a continually growing world population. Modern agricultural chemistry has to support farmers by providing innovative agrichemicals, used in applied agriculture. In this context, the introduction of halogen atoms into an active ingredient is still an important tool to modulate the properties of new crop protection compounds. Since 2010, around 96% of the launched products (herbicides, fungicides, insecticides/acaricides and nematicides) contain halogen atoms. The launched nematicides contain the largest number of halogen atoms, followed by insecticides/acaricides, herbicides and fungicides. In this context, fungicides and herbicides contain in most cases fluorine atoms, whereas nematicides and insecticides contain in most cases 'mixed' halogen atoms, for example chlorine and fluorine. This review gives an overview of the latest generation of halogen-containing pesticides launched over the past 6 years and describes current halogen-containing development candidates. © 2017 Society of Chemical Industry.

  18. Containment atmosphere response to external sprays

    SciTech Connect

    Green, J.; Almenas, K.

    1995-09-01

    The application of external sprays to a containment steel shell can be an effective energy removal method and has been proposed in the passive AP-600 design. Reduction of the steel shell temperature in contact with the containment atmosphere enhances both heat and mass transfer driving forces. Large scale experimental data in this area is scarce, therefore the measurements obtained from the E series tests conducted at the German HDR facility deserve special attention. These long term tests simulated various severe accident conditions, including external spraying of the hemispherical steel shell. This investigation focuses upon the integral response of the HDR containment atmosphere during spray periods and upon methods by which lumped parameter system codes, like CONTAIN, model the underlying condensation phenomena. Increases in spray water flowrates above a minimum value were ineffective at improving containment pressure reduction since the limiting resistance for energy transfer lies in the noncondensable-vapor boundary layer at the inner condensing surface. The spray created an unstable condition by cooling the upper layers of a heated atmosphere and thus inducing global natural circulation flows in the facility and subsequently, abrupt changes in lighter-than-air noncondensable (J{sub 2}/He) concentrations. Modeling results using the CONTAIN code are outlined and code limitations are delineated.

  19. Containment Prospectus for the TRUMPET Experiments

    SciTech Connect

    Pawloski, G A

    2004-02-05

    TRUMPET is a series of dynamic subcritical experiments planned for execution in the U1a.102D alcove of the U1a Complex at the Nevada Test Site (NTS). The location of LLNL drifts at the U1a Complex is shown in Figure 1. The data from the TRUMPET experiments will be used in the Stockpile Stewardship Program to assess the aging of nuclear weapons components and to better model the long-term performance of weapons in the enduring stockpile. The TRUMPET series of experiments will be conducted in an almost identical way as the OBOE series of experiments. Individual TRUMPET experiments will be housed in an experiment vessel, as was done for OBOE. These vessels are the same as those utilized for OBOE. All TRUMPET experiments will occur in the zero room in the U1a.102D alcove, which is on the opposite side of the U1a.102 drift from U1a.102C, which housed the OBOE experiments. The centerlines of these two alcoves are separated by only 10 feet. As with OBOE experiments, expended TRUMPET experiment vessels will be moved to the back of the alcove and entombed in grout. After the TRUMPET series of experiments is completed, another experiment will be sited in the U1a.102D alcove and it will be the final experiment in the zero room, as was similarly done for the OBOE series of experiments followed by the execution of the PIANO experiment. Each experimental package for TRUMPET will be composed of high explosive (HE) and special nuclear material (SNM) in a subcritical assembly. Each experimental package will be placed in an experimental vessel within the TRUMPET zero room in the U1a.102D alcove. The containment plan for the TRUMPET experiments utilizes a two-nested containment vessel concept, similar to OBOE and other subcritical experiments in the U1a Complex. The first containment vessel is formed by the primary containment barrier that seals the U1a.102D drift. The second containment vessel is formed by the secondary containment barrier in the U1a.100 drift. While it is likely

  20. AP600 containment purge radiological analysis

    SciTech Connect

    O`Connor, M.; Schulz, J.; Tan, C.

    1995-02-01

    The AP600 Project is a passive pressurized water reactor power plant which is part of the Design Certification and First-of-a-Kind Engineering effort under the Advanced Light Water Reactor program. Included in this process is the design of the containment air filtration system which will be the subject of this paper. We will compare the practice used by previous plants with the AP600 approach to meet the goals of industry standards in sizing the containment air filtration system. The radiological aspects of design are of primary significance and will be the focus of this paper. The AP600 Project optimized the design to combine the functions of the high volumetric flow rate, low volumetric flow rate, and containment cleanup and other filtration systems into one multi-functional system. This achieves a more simplified, standardized, and lower cost design. Studies were performed to determine the possible concentrations of radioactive material in the containment atmosphere and the effectiveness of the purge system to keep concentrations within 10CFR20 limits and within offsite dose objectives. The concentrations were determined for various reactor coolant system leakage rates and containment purge modes of operation. The resultant concentrations were used to determine the containment accessibility during various stages of normal plant operation including refueling. The results of the parametric studies indicate that a dual train purge system with a capacity of 4,000 cfm per train is more than adequate to control the airborne radioactivity levels inside containment during normal plant operation and refueling, and satisfies the goals of ANSI/ANS-56.6-1986 and limits the amount of radioactive material released to the environment per ANSI/ANS 59.2-1985 to provide a safe environment for plant personnel and offsite residents.

  1. Composite-flywheel burst-containment study

    SciTech Connect

    Sapowith, A D; Handy, W E

    1982-04-08

    A key component impacting total flywheel energy storage system weight is the containment structure. This report addresses the factors that shape this structure and define its design criteria. In addition, containment weight estimates are made for the several composite flywheel designs of interest so that judgements can be made as to the relative weights of their containment structure. The requirements set down for this program were that all containment weight estimates be based on a 1 kWh burst. It should be noted that typical flywheel requirements for regenerative braking of small automobiles call for deliverable energies of 0.25 kWh. This leads to expected maximum burst energies of 0.5 kWh. The flywheels studied are those considered most likely to be carried further for operational design. These area: The pseudo isotropic disk flywheel, sometimes called the alpha ply; the SMC molded disk; either disk with a carbon ring; the subcircular rim with cruciform hub; and Avco's bi-directional circular weave disk. The flywheel materials for the disk are S-glass; the subcircular rim is Kevlar over S-glass. Test data on flywheel bursts and containment failures were analyzed. Recommendations are made for further testing.

  2. Active containment systems incorporating modified pillared clays

    SciTech Connect

    Lundie, P. |; McLeod, N.

    1997-12-31

    The application of treatment technologies in active containment systems provides a more advanced and effective method for the remediation of contaminated sites. These treatment technologies can be applied in permeable reactive walls and/or funnel and gate systems. The application of modified pillared clays in active containment systems provides a mechanism for producing permeable reactive walls with versatile properties. These pillared clays are suitably modified to incorporate reactive intercalatants capable of reacting with both a broad range of organic pollutants of varying molecular size, polarity and reactivity. Heavy metals can be removed from contaminated water by conventional ion-exchange and other reactive processes within the clay structure. Complex contamination problems can be addressed by the application of more than one modified clay on a site specific basis. This paper briefly describes the active containment system and the structure/chemistry of the modified pillared clay technology, illustrating potential applications of the in-situ treatment process for contaminated site remediation.

  3. Reliability Estimation for Double Containment Piping

    SciTech Connect

    L. Cadwallader; T. Pinna

    2012-08-01

    Double walled or double containment piping is considered for use in the ITER international project and other next-generation fusion device designs to provide an extra barrier for tritium gas and other radioactive materials. The extra barrier improves confinement of these materials and enhances safety of the facility. This paper describes some of the design challenges in designing double containment piping systems. There is also a brief review of a few operating experiences of double walled piping used with hazardous chemicals in different industries. This paper recommends approaches for the reliability analyst to use to quantify leakage from a double containment piping system in conceptual and more advanced designs. The paper also cites quantitative data that can be used to support such reliability analyses.

  4. Investigation of some topical formulations containing dexpanthenol.

    PubMed

    Stozkowska, Wiesława; Piekoś, Ryszard

    2004-01-01

    Owing to its ability to regenerate epidermal cells Dexpanthenol (D-panthenol; chemically known as (+)-2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethylbutyramide) has found use for the treatment of patholytic ileus and postoperative distention. The purpose of research was to develop a gel containing dexpanthenol by monitoring the effect of various concentrations of a gelating agent on the activity of the ciliary apparatus. A system containing 2.5% of hydroxyethylcellulose was optimal for the preparation of the gel. Together with a formulation containing 5% of dexpanthenol, drops with equal concentration of the active compound were tested for comparison. Physical characteristics, such as osmotic pressure, acidity, density and viscosity of the preparation were determined as well as its microbiological sterility. The anti-inflammatory activity of the gel was determined following its topical application. Epidermal tests showed its good tolerance after topical application to the shaved skin of guinea pigs.

  5. Spent fuel container alignment device and method

    DOEpatents

    Jones, Stewart D.; Chapek, George V.

    1996-01-01

    An alignment device is used with a spent fuel shipping container including a plurality of fuel pockets for spent fuel arranged in an annular array and having a rotatable cover including an access opening therein. The alignment device includes a lightweight plate which is installed over the access opening of the cover. A laser device is mounted on the plate so as to emit a laser beam through a laser admittance window in the cover into the container in the direction of a pre-established target associated with a particular fuel pocket. An indexing arrangement on the container provides an indication of the angular position of the rotatable cover when the laser beam produced by the laser is brought into alignment with the target of the associated fuel pocket.

  6. Optical properties of coumarins containing copolymers

    NASA Astrophysics Data System (ADS)

    Skowronski, L.; Krupka, O.; Smokal, V.; Grabowski, A.; Naparty, M.; Derkowska-Zielinska, B.

    2015-09-01

    We investigate the optical properties such as absorption coefficient, refractive index, real and imaginary parts of dielectric function and energy band gap of coumarin-containing copolymers thin films by means of spectroscopic ellipsometry (SE) combined with transmittance measurements (T) and atomic force microscopy (AFM). We found that the optical properties of coumarin-containing copolymers strongly depend from length of alkyl spacer as well as the type of substitution in coumarin moiety. In our case the refractive index as well as the energy band gap of coumarin-containing copolymer decrease with increase the length of alkyl spacer. Additionally, the lengthening of the alkyl spacer brings the bathochromic shifts of the absorption spectra towards longer wavelengths.

  7. JUNIOR JADE - containment phenomenology of decoupled events

    SciTech Connect

    Smith, C.W.

    1995-02-01

    With five 8 pound high-explosive experiments, the author has investigated aspects of the containment phenomenology of partially decoupled events. In three experiments he observed multiple fractures and little cavity growth. In the final two experiments there were no fractures and cavity volumes grew by factors of approximately two and three. With the five experiments a spectrum of results ranging from hydraulic fracture - like crack propagation through multiple fracture propagation to the no fracture, or fully contained, case, was observed. For the multiple fracture experiments a partial residual stress field may have controlled the release of the cavity pressure. Measurements of cavity pressure versus time provided containment diagnostics; post event mining allowed visual observation of the cavities and fractures.

  8. Conversion method for gas streams containing hydrocarbons

    DOEpatents

    Mallinson, Richard G.; Lobban, Lance; Liu, Chang-jun

    2000-01-01

    An apparatus and a method of using the apparatus are provided for converting a gas stream containing hydrocarbons to a reaction product containing effluent molecules having at least one carbon atom, having at least one interior surface and at least one exterior surface, a first electrode and a second electrode with the first and second electrodes being selectively movable in relation to each other and positioned within the housing so as to be spatially disposed a predetermined distance from each other, a plasma discharge generator between the first and second electrodes, gas stream introducer and a collector for collecting the reaction product effluent produced by the reaction of the gas stream containing hydrocarbons with the plasma discharge between the first and second electrodes.

  9. Crack propagation and arrest in pressurized containers

    NASA Technical Reports Server (NTRS)

    Erdogan, F.; Delale, F.; Owczarek, J. A.

    1976-01-01

    The problem of crack propagation and arrest in a finite volume cylindrical container filled with pressurized gas is considered. It is assumed that the cylinder contains a symmetrically located longitudinal part-through crack with a relatively small net ligament. The net ligament suddenly ruptures initiating the process of fracture propagation and depressurization in the cylinder. Thus the problem is a coupled gas dynamics and solid mechanics problem the exact formulation of which does not seem to be possible. The problem is reduced to a proper initial value problem by introducing a dynamic fracture criterion which relates the crack acceleration to the difference between a load factor and the corresponding strength parameter. The results indicate that generally in gas filled cylinders fracture arrest is not possible unless the material behaves in a ductile manner and the container is relatively long.

  10. Piercing tool, Transportation Accident Resistant Container (TARC)

    SciTech Connect

    Lari, P.

    1994-08-01

    Transportation Accident Resistant Containers (TARC)s are used for enhanced safety during movement of nuclear weapons. Its design features a tough stainless steel outer skin, redwood for impact mitigation and fire protection and a rugged aluminum inner container. Redwood absorbs impact energy by crushing, similar to the way foam crushes in other containers. Redwood also functions to insulate the weapon from heat and fire. When a TARC is involved in a fire, the redwood will slowly burn forming a good insulating char. The redwood can continue to smolder once the fire is out. To ensure the smolder is extinguished, water can be directed into any accident caused hole in the skin. If no hole exists, it may be necessary to create one. This document discusses tool selection, testing, and a simple but effective method of creating an access hole in the outer skin large enough to apply fire fighting techniques.

  11. Explosive containment with spherically tamped powders

    SciTech Connect

    Glenn, L.A.

    1986-11-15

    An effective technique for maximizing the explosive charge that a given container can safely handle is to fill the space between the charge and the container walls with a porous medium or a powder. Using the wrong powder, however, can be worse than using no powder at all. Moreover, a powder-filled container that performs very well with a small charge may also be worse than a powderless system when the charge is increased. An analysis of this problem is developed with the aim of identifying appropriate buffer material properties and the conditions under which breakdown occurs. The results are compared with various experiments performed with graphite powder, coke chunks, granular salt, snow, and vermiculite.

  12. Hydrogen behavior in ice condenser containments

    SciTech Connect

    Lundstroem, P.; Hongisto, O.; Theofanous, T.G.

    1995-09-01

    A new hydrogen management strategy is being developed for the Loviisa ice condenser containment. The strategy relies on containment-wide natural circulations that develop, once the ice condenser doors are forced open, to effectively produce a well-mixed behavior, and a correspondingly slow rise in hydrogen concentration. Levels can then be kept low by a distributed catalytic recombiner system, and (perhaps) an igniter system as a backup, while the associated energy releases can be effectively dissipated in the ice bed. Verification and fine-tuning of the approach is carried out experimentally in the VICTORIA facility and by associated scaling/modelling studies. VICTORIA represents an 1/15th scale model of the Loviisa containment, hydrogen is simulated by helium, and local concentration measurements are obtained by a newly developed instrument specifically for this purpose, called SPARTA. This paper is focused on experimental results from several key experiments that provide a first delineation of key behaviors.

  13. Water-Soluble Metallocene-Containing Polymers.

    PubMed

    Alkan, Arda; Wurm, Frederik R

    2016-09-01

    Metallocenes are organometallic compounds with reversible redox profiles and tunable oxidation and reduction potentials, depending on the metal and substituents at the cyclopentadienyl rings. Metallocenes have been introduced in macromolecules to combine the redox-activity with polymer properties. There are many examples of such hydrophobic polymer materials, but much fewer water-soluble examples are found scattered across the polymer literature. However, in terms of drug delivery and other biological applications, water solubility is essential. For this very reason, all the synthetic routes to water-soluble metallocene containing polymers are collected and discussed here. The focus is on neutral ferrocene- and ruthenocene-containing and charged cobaltocenium-containing macromolecules (i.e., symmetrical sandwich complexes). The synthetic protocols, self-assembly behavior, and other benefits of the obtained materials are discussed.

  14. Development of a Whole Container Seal

    SciTech Connect

    Kuhn, Michael J; Pickett, Chris A; Stinson, Brad J; Rowe, Nathan C

    2014-01-01

    This paper outlines a technique for utilizing electrically conductive textiles as a whole container seal. This method has the potential to provide more robustness for ensuring that the container has not been breached versus conventional sealing methods that only provide tamper indication at the area used for normal access. The conductive textile is used as a distributed sensor for detecting and localizing container tamper or breach. For sealing purposes, the conductive fabric represents a bounded, near-infinite grid of resistors. The well-known infinite resistance grid problem was used to model and confirm the expected accuracy and validity of this approach. An experimental setup was built that uses a multiplexed Wheatstone bridge measurement to determine the resistances of a coarse electrode grid across the conductive fabric. Non-uniform resistance values of the grid infer the presence of damage or tears in the fabric. Results suggest accuracy proportional to the electrode spacing in determining the presence and location of disturbances in conductive fabric samples. Current work is focused on constructing experimental prototypes for field and environmental testing to gauge the performance of these whole container seals in real world conditions. We are also developing software and hardware to interface with the whole container seals. The latest prototypes are expected to provide more accuracy in detecting and localizing events, although detection of a penetration should be adequate for most sealing applications. We are also developing smart sensing nodes that integrate digital hardware and additional sensors (e.g., motion, humidity) into the electrode nodes within the whole container seal.

  15. Reciprocating clamp apparatus for thermoforming plastic containers

    SciTech Connect

    Beck, M.H.; Harry, I.L.; Krishnakumar, S.M.

    1984-03-06

    This relates to the forming of containers and like hollow articles from sheets or webs of thermoplastic material. Two webs or sheets are simultaneously acted upon by way of a forming apparatus which includes a reciprocating clamp first cooperable with one outer platen and then the other in sequence wherein, while a first web or sheet is being formed within a plurality of mold cavities to define a plurality of hollow articles such as containers, the other sheet or web may be stripped from its respective mold set and a new sheet or a new portion of a sheet or web may be advanced into position for molding. The forming apparatus may be constructed in a manner wherein the web portions which are to be formed may be billowed away from the mold cavities as an initial step in the stretching and orientation of the thermoplastic material. The thermoplastic material may be heated to the desired forming temperature using separate sets of rf electrodes so that only those portions of the thermoplastic material which are to be formed need be heated. Two sets of containers of different sizes may be formed from the webs or sheets, and then internested to form double wall containers wherein the walls may be formed of different materials and wherein the outer material may be a barrier material, or wherein the walls of the containers are spaced apart to form an insulated container. This abstract forms no part of the specification of this application and is not to be construed as limiting the claims of the application.

  16. Cells having cathodes containing polycarbon disulfide materials

    DOEpatents

    Okamoto, Yoshi; Skotheim, Terje A.; Lee, Hung S.

    1995-08-15

    The present invention relates to an electric current producing cell which contains an anode, a cathode having as a cathode-active material one or more carbon-sulfur compounds of the formula (CS.sub.x).sub.n, in which x takes values from 1.2 to 2.3 and n is greater or equal to 2, and where the redox process does not involve polymerization and de-polymerization by forming and breaking S--S bonds in the polymer backbone. The cell also contains an electrolyte which is chemically inert with respect to the anode and the cathode.

  17. Cells having cathodes containing polycarbon disulfide materials

    DOEpatents

    Okamoto, Y.; Skotheim, T.A.; Lee, H.S.

    1995-08-15

    The present invention relates to an electric current producing cell which contains an anode, a cathode having as a cathode-active material one or more carbon-sulfur compounds of the formula (CS{sub x}){sub n}, in which x takes values from 1.2 to 2.3 and n is greater or equal to 2, and where the redox process does not involve polymerization and de-polymerization by forming and breaking S--S bonds in the polymer backbone. The cell also contains an electrolyte which is chemically inert with respect to the anode and the cathode. 5 figs.

  18. The Retrograde of Shipping Containers from Afghanistan

    DTIC Science & Technology

    2013-04-01

    War, (New York, New York: The Random House Publishing Group, 1993), Page 78. 2 MAJ Tony Velazquez , 1st TSC, SPO Mobility and Mark LaRue, Global...mail to author, March 23, 2013 25 Ibid. 26 Ibid. 27 MAJ Tony Velazquez , 1st TSC, SPO Mobility and Mark LaRue, Global Container Manager, Surface...Late Fees for Military Shipping Containers Soar”, USA Today, October 4, 2012 33 MAJ Tony Velazquez , 1st TSC, SPO Mobility and Mark LaRue, Global

  19. Blends of cysteine-containing proteins

    NASA Astrophysics Data System (ADS)

    Barone, Justin

    2005-03-01

    Many agricultural wastes are made of proteins such as keratin, lactalbumin, gluten, and albumin. These proteins contain the amino acid cysteine. Cysteine allows for the formation of inter-and intra-molecular sulfur-sulfur bonds. Correlations are made between the properties of films made from the proteins and the amino acid sequence. Blends of cysteine-containing proteins show possible synergies in physical properties at intermediate concentrations. FT-IR spectroscopy shows increased hydrogen bonding at intermediate concentrations suggesting that this contributes to increased physical properties. DSC shows limited miscibility and the formation of new crystalline phases in the blends suggesting that this too contributes.

  20. Acetabular pneumatocyst containing air-fluid level.

    PubMed

    Narváez, J A; Narváez, J; Rodríguez-Mijarro, M; Quintero, J C

    1999-01-01

    The presence of intraosseous gas most commonly occurs in osteomyelitis, vacuum phenomenon, and postsurgery or posttraumatic states. Several cases of subchondral gas-filled lesions, called pneumatocysts, have also been described in the sacroiliac joint and clavicle, none of them with intralesional air-fluid level. These pneumatocysts are innocuous lesions of uncertain origin. We describe one case of acetabular pneumatocyst containing air-fluid level in a 62-year-old man with long-standing ankylosing spondylitis involving hip joint. To our knowledge, this is the first reported case of a pneumatocyst in an acetabular location containing air-fluid level.

  1. Containment: Concept and Policy. Volume 1

    DTIC Science & Technology

    1986-01-01

    34contain" one another. For "con- tainment" was just another way of talking about restoring a bal- ance of power in the world, and that idea would surely...side but because of the compul- sions, the suspicions, the anxieties such a competition engen - ders, and because of the very serious dangers it carries...ronment as a support system for civilized living. And finally, there is much in our own life, here in this country, that needs early containment. It

  2. Quick-sealing design for radiological containment

    DOEpatents

    Rampolia, Donald S.; Speer, Elmer

    1990-01-01

    A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

  3. Quick-sealing design for radiological containment

    DOEpatents

    Rampolla, Donald S.; Speer, Elmer

    1991-01-01

    A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

  4. SCIS. Small Container Storage Inventory System

    SciTech Connect

    Esworthy, S.

    1988-09-01

    SCIS, the Small Container Inventory System, was developed to track the chemical inventory in the Small Container Storage Facility. Running totals of the amounts of stored chemicals can be extracted daily, with reports generated at the close of business on the last working day of each month. SCIS is designed to provide complete logging of all chemical transactions of the Facility. Records can be retrieved based on key information in any of the 14 fields in the system. Eight reports are available by division, cabinet number, and chemical name; for chemicals removed and chemicals remaining; for all transactions occurring during a specified month; and a current inventory by chemical name and cabinet number.

  5. Explosive containment and propagation evaluations for commonly used handling and storage containers

    SciTech Connect

    LeBlanc, R.

    1994-01-01

    A series of explosive tests were performed to establish containment integrity data for commonly used handling and storage containers of energetic materials at Sandia National Laboratories, Albuquerque, N.M. The tests consisted of two phases: (1) each container was tested for explosive integrity and propagation, and (2) the data were used to evaluate a nominal donor-receptor test matrix for verifying the confinement integrity of a typical explosives service locker.

  6. 21 CFR 606.121 - Container label.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Container label. 606.121 Section 606.121 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS CURRENT GOOD MANUFACTURING PRACTICE FOR BLOOD AND BLOOD COMPONENTS Finished Product Control §...

  7. 27 CFR 28.143 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Containers. 28.143 Section 28.143 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... removal of beer for consumption or sale....

  8. Starch-lipid composites containing cimmamaldehyde

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The formulation of a starch-lipid composite containing cinnamaldehyde as antimicrobial agent has been studied. Cinnamaldehyde was incorporated as an emulsion using Acetem 90-50K as a carrier and Tween 60 as the emulsifier. Oil in water emulsions were prepared by direct emulsification using a high sh...

  9. 7 CFR 58.730 - Filling containers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Procedures § 58.730 Filling containers. Hot fluid cheese from the cookers may be held in hotwells or hoppers to assure a constant and even supply of processed cheese to the filler or slice former. Filler valves... and shall cut off sharply without drip or drag of cheese across the opening. An effective system...

  10. Inspection of cargo containers using gamma radiation

    NASA Astrophysics Data System (ADS)

    Hussein, Esam M. A.; Gokhale, Prasad; Arendtsz, Nina V.; Lawrence, Andre H.

    1997-02-01

    This paper investigate, with the aid of Monte Carlo simulations and laboratory experiments, a technique for the detection of narcotics in large cargo containers using gamma-radiation. The transmission and back-scattering of photons, at different energies, is used to provide information useful for identifying the presence of bulk quantities of commonly encountered narcotics.

  11. Response analysis of an automobile shipping container

    NASA Technical Reports Server (NTRS)

    Hua, L.; Lee, S. H.; Johnstone, B.

    1973-01-01

    The design and development of automobile shipping containers to reduce enroute damage are discussed. Vibration tests were conducted to determine the system structural integrity. A dynamic analysis was made using NASTRAN and the results of the test and the analysis are compared.

  12. Dimensionally Stable Ether-Containing Polyimide Copolymers

    NASA Technical Reports Server (NTRS)

    Fay, Catharine C. (Inventor); St.Clair, Anne K. (Inventor)

    1999-01-01

    Novel polyimide copolymers containing ether linkages were prepared by the reaction of an equimolar amount of dianhydride and a combination of diamines. The polyimide copolymers described herein possess the unique features of low moisture uptake, dimensional stability, good mechanical properties, and moderate glass transition temperatures. These materials have potential application as encapsulants and interlayer dielectrics.

  13. Feasibility of Magnetostrictive Sensor Inspection of Containments

    SciTech Connect

    Kwun, H.

    1999-03-01

    This report describes the results of a study on the feasibility of using guided waves for long-range global inspection of containment metallic pressure boundaries (i.e., steel containments and liners of reinforced concrete containments) in nuclear power plants. Of particular concern in this study was the potential of the guided-wave approach for remotely inspecting the regions that are inaccessible; for example, regions where the metallic pressure boundary is backed by concrete on one or both sides. The study includes a literature review on long-range guided-wave inspection techniques, a modeling study of the behavior of guided waves in plates with different boundary conditions (e.g., freestanding and backed by concrete on one or both sides), and an experimental investigation of the feasibility of a guided-wave technique called ''magnetostrictive sensor (MsS)'' for (1) generating and detecting guided waves in plates and (2) detecting a defect over a long range. Results of the study showed (1) that it is feasible to achieve long-range global inspection of plates, including regions that are inaccessible, using low-frequency guided waves and (2) that the MsS technique is well suited for this application. Recommendations are made to further test and develop the MsS technique for practical implementation for containment inspection in nuclear power plants.

  14. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Container. 160.026-3 Section 160.026-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... under vacuum, and after sealing, it shall be autoclaved at a temperature of not less than 250 °F....

  15. 46 CFR 160.026-3 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Container. 160.026-3 Section 160.026-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... under vacuum, and after sealing, it shall be autoclaved at a temperature of not less than 250 °F....

  16. Fuel additive containing inner quaternary ammonium salt

    SciTech Connect

    Biasotti, J.B.; Vartanian, P.F.

    1980-05-06

    As a fuel additive is disclosed. It is the reaction product of a polymer having an amine group and an alpha-beta-unsaturated C3-C6 aliphatic carboxylic acid. Also disclosed herein is a fuel component, especially gasoline, containing such a reaction product as a detergent.

  17. Fuel compositions containing deposit control additives

    SciTech Connect

    Lilburn, J.E.

    1980-11-18

    Fuel compositions are provided which contain a deposit control additive. The deposit control additive is produced by reacting a hydrocarbylpoly(oxyalkylene) alcohol with excess phosgene and an excess amount of certain polyamines. The product comprises hydrocarbylpoly(oxyalkylene) ureylene carbamates.

  18. Process for upgrading arsenic-containing oils

    DOEpatents

    Sullivan, Richard F.

    1979-01-01

    A method is provided for avoiding feed-transfer-line plugging by a deposit comprising arsenic in hydroprocessing an oil containing an arsenic contaminant. In the method, a mixture of hydrogen gas and the oil is formed in situ in a bed of porous particulate contact material.

  19. 21 CFR 606.121 - Container label.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... prepared in a system that might compromise sterility, the hour of expiration. (ii) If Source Plasma... collection date for each unit in the pool. (5) For Whole Blood, Plasma, Platelets, and partial units of Red... the container label for Source Plasma is not required to list the negative results of...

  20. Fe-containing phases in hydrated cements

    SciTech Connect

    Dilnesa, B.Z.; Wieland, E.; Lothenbach, B.; Dähn, R.; Scrivener, K.L.

    2014-04-01

    In this study synchrotron X-ray absorption spectroscopy (XAS) has been applied, an element specific technique which allows Fe-containing phases to be identified in the complex mineral mixture of hydrated cements. Several Fe species contributed to the overall Fe K-edge spectra recorded on the cement samples. In the early stage of cement hydration ferrite was the dominant Fe-containing mineral. Ferrihydrite was detected during the first hours of the hydration process. After 1 day the formation of Al- and Fe-siliceous hydrogarnet was observed, while the amount of ferrihydrite decreased. The latter finding agrees with thermodynamic modeling, which predicts the formation of Fe-siliceous hydrogarnet in Portland cement systems. The presence of Al- and Fe-containing siliceous hydrogarnet was further substantiated in the residue of hydrated cement by performing a selective dissolution procedure. - Highlights: • Fe bound to ferrihydrite at early age hydration • Fe found to be stable in siliceous hydrogarnet at longer term age hydration • Fe-containing AFt and AFm phases are less stable than siliceous hydrogarnet. • The study demonstrates EXAFS used to identify amorphous or poorly crystalline phases.

  1. Predictability of steel containment response near failure

    SciTech Connect

    Costello, J.F.; Ludwigsen, J.S.; Luk, V.K.; Hessheimer, M.F.

    2000-01-06

    The Nuclear Power Engineering Corporation of Japan and the US Nuclear Regulatory Commission Office of Nuclear Regulatory Research, are co-sponsoring and jointly funding a Cooperative Containment Research Program at Sandia National Laboratories, Albuquerque, New Mexico, USA. As a part of this program, a steel containment vessel model and contact structure assembly was tested to failure with over pressurization at Sandia on December 11--12, 1996. The steel containment vessel model was a mixed-scale model (1:10 in geometry and 1:4 in shell thickness) of a steel containment for an improved Mark-II Boiling Water Reactor plant in Japan. The contact structure, which is a thick, bell-shaped steel shell separated at a nominally uniform distance from the model, provides a simplified representation of features of the concrete reactor shield building in the actual plant. The objective of the internal pressurization test was to provide measurement data of the structural response of the model up to its failure in order to validate analytical modeling, to find its pressure capacity, and to observe the failure model and mechanisms.

  2. 7 CFR 922.110 - Container exemption.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE APRICOTS GROWN IN DESIGNATED... shipments of apricots in experimental containers, approved by the committee, subject to the following: (a... conducted by or in cooperation with the Washington Apricot Marketing Committee. (b) The handler shall...

  3. 7 CFR 922.110 - Container exemption.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE APRICOTS GROWN IN DESIGNATED... shipments of apricots in experimental containers, approved by the committee, subject to the following: (a... conducted by or in cooperation with the Washington Apricot Marketing Committee. (b) The handler shall...

  4. 7 CFR 922.110 - Container exemption.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE APRICOTS GROWN IN DESIGNATED... shipments of apricots in experimental containers, approved by the committee, subject to the following: (a... conducted by or in cooperation with the Washington Apricot Marketing Committee. (b) The handler shall...

  5. 7 CFR 922.110 - Container exemption.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE APRICOTS GROWN IN DESIGNATED... shipments of apricots in experimental containers, approved by the committee, subject to the following: (a... conducted by or in cooperation with the Washington Apricot Marketing Committee. (b) The handler shall...

  6. 7 CFR 922.110 - Container exemption.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE APRICOTS GROWN IN DESIGNATED... shipments of apricots in experimental containers, approved by the committee, subject to the following: (a... conducted by or in cooperation with the Washington Apricot Marketing Committee. (b) The handler shall...

  7. Magnetic Heat Pump Containing Flow Diverters

    NASA Technical Reports Server (NTRS)

    Howard, Frank S.

    1995-01-01

    Proposed magnetic heat pump contains flow diverters for suppression of undesired flows. If left unchecked, undesired flows mix substantial amounts of partially heated and partially cooled portions of working fluid, effectively causing leakage of heat from heated side to cooled side. By reducing leakage of heat, flow diverters increase energy efficiency of magnetic heat pump, potentially offering efficiency greater than compressor-driven refrigerator.

  8. Democratic Pedagogy and the Discourse of Containment.

    ERIC Educational Resources Information Center

    Popen, Shari

    2002-01-01

    Discusses application of a discourse of containment in pedagogical practice, asserting that this discourse limits democratic possibilities in the classroom. Analyzes the stakes in political struggles over control of the production of meaning within the classroom, examining the mythologized version of Rosa Parks' story and the current agenda of…

  9. Microbial production of lactate-containing polyesters

    PubMed Central

    Yang, Jung Eun; Choi, So Young; Shin, Jae Ho; Park, Si Jae; Lee, Sang Yup

    2013-01-01

    Due to our increasing concerns on environmental problems and limited fossil resources, biobased production of chemicals and materials through biorefinery has been attracting much attention. Optimization of the metabolic performance of microorganisms, the key biocatalysts for the efficient production of the desired target bioproducts, has been achieved by metabolic engineering. Metabolic engineering allowed more efficient production of polyhydroxyalkanoates, a family of microbial polyesters. More recently, non-natural polyesters containing lactate as a monomer have also been produced by one-step fermentation of engineered bacteria. Systems metabolic engineering integrating traditional metabolic engineering with systems biology, synthetic biology, protein/enzyme engineering through directed evolution and structural design, and evolutionary engineering, enabled microorganisms to efficiently produce natural and non-natural products. Here, we review the strategies for the metabolic engineering of microorganisms for the in vivo biosynthesis of lactate-containing polyesters and for the optimization of whole cell metabolism to efficiently produce lactate-containing polyesters. Also, major problems to be solved to further enhance the production of lactate-containing polyesters are discussed. PMID:23718266

  10. 7 CFR 923.17 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Container. 923.17 Section 923.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE SWEET CHERRIES GROWN IN...

  11. 7 CFR 923.17 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Container. 923.17 Section 923.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET CHERRIES GROWN IN...

  12. 7 CFR 923.17 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Container. 923.17 Section 923.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE SWEET CHERRIES GROWN IN...

  13. 7 CFR 923.17 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Container. 923.17 Section 923.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE SWEET CHERRIES GROWN IN...

  14. Containment considerations for the biotechnology industry.

    PubMed

    Liberman, D F; Fink, R

    1991-01-01

    The handling of hazardous organisms or chemical substances in any research and development activity must be performed in such a manner as to minimize worker exposure to these materials. The term containment is used to describe the assemblage of primary and secondary preventive measures that provide personal, experimental, and environmental protection.

  15. Study of audio speakers containing ferrofluid.

    PubMed

    Rosensweig, R E; Hirota, Y; Tsuda, S; Raj, K

    2008-05-21

    This work validates a method for increasing the radial restoring force on the voice coil in audio speakers containing ferrofluid. In addition, a study is made of factors influencing splash loss of the ferrofluid due to shock. Ferrohydrodynamic analysis is employed throughout to model behavior, and predictions are compared to experimental data.

  16. Superconducting oxides containing sulphate and phosphate groups

    NASA Astrophysics Data System (ADS)

    Dominguez, Angel Bustamante; Scorzelli, R. B.; Baggio-Saitovitch, E.; Giordanengo, B.; Elmassalami, M.

    1994-12-01

    The effects of partial substitution of Sr and Ca in YBaCuO related materials containing sulphate and phosphate groups have been investigated. 57Fe Mössbauer measurements were performed on samples doped with lat.% 57Fe and the spectral components related to different Cu sites and oxygen vacancies.

  17. Superconducting oxides containing sulphate and phosphate groups

    NASA Astrophysics Data System (ADS)

    Scorzelli, R. B.; Baggio-Saitovitch, E.; Giordanengo, B.; Elmassalami, M.; Dominguez, A. B.; Bustamante Dominguez, A.

    1994-12-01

    The effects of partial substitution of Sr and Ca in Y-Ba-Cu-O related materials containing sulphate and phosphate groups have been investigated. e57Fe Mössbauer measurements were performed on samples doped with lat. % e57Fe and the spectral components related to different Cu sites and oxygen vacancies.

  18. Order and Containment in Concurrent System Design

    DTIC Science & Technology

    2000-01-01

    determined at compile time. How the source code of a program is written determines what the containment constraints will be. Order constraints between...searching existing data sources , gathering and maintaining the data needed, and completing and reviewing the collection of information. Send...38 2.2.3 Conservative Compile Time Deadlock Detection . . . . . . . . . . . . . . 41 2.2.4 Communication Semantics

  19. A Study on Generation Ice Containing Ozone

    NASA Astrophysics Data System (ADS)

    Yoshimura, Kenji; Koyama, Shigeru; Yamamoto, Hiromi

    Ozone has the capability of sterilization and deodorization due to high oxidation power. It is also effective for the conservation of perishable foods and purification of water. However, ozone has a disadvantage, that is, conservation of ozone is difficult because it changes back into oxygen. Recently, ice containing ozone is taken attention for the purpose of its conservation. The use of ice containing ozone seems to keep food fresher when we conserve and transport perishable foods due to effects of cooling and sterilization of ice containing ozone. In the present study, we investigated the influence of temperatures of water dissolving ozone on the timewise attenuations of ozone concentration in water. We also investigated the influence of cooling temperature, ice diameter, initial temperatures of water dissolving ozone and container internal pressure of the water dissolving ozone on ozone concentration in the ice. In addition, we investigated the influence of the ice diameter on the timewise attenuations of ozone concentration in the ice. It was confirmed that the solidification experimental data can be adjusted by a correlation between ozone concentration in the ice and solidification time.

  20. Shark cartilage contains inhibitors of tumor angiogenesis.

    PubMed

    Lee, A; Langer, R

    1983-09-16

    Shark cartilage contains a substance that strongly inhibits the growth of new blood vessels toward solid tumors, thereby restricting tumor growth. The abundance of this factor in shark cartilage, in contrast to cartilage from mammalian sources, may make sharks an ideal source of the inhibitor and may help to explain the rarity of neoplasms in these animals.

  1. Explosion testing for the container venting system

    SciTech Connect

    Cashdollar, K.L.; Green, G.M.; Thomas, R.A.; Demiter, J.A.

    1993-09-30

    As part of the study of the hazards of inspecting nuclear waste stored at the Hanford Site, the US Department of Energy and Westinghouse Hanford Company have developed a container venting system to sample the gases that may be present in various metal drums and other containers. In support of this work, the US Bureau of Mines has studied the probability of ignition while drilling into drums and other containers that may contain flammable gas mixtures. The Westinghouse Hanford Company drilling procedure was simulated by tests conducted in the Bureau`s 8-liter chamber, using the same type of pneumatic drill that will be used at the Hanford Site. There were no ignitions of near-stoichiometric hydrogen-air or methane-air mixtures during the drilling tests. The temperatures of the drill bits and lids were measured by an infrared video camera during the drilling tests. These measured temperatures are significantly lower than the {approximately}500{degree}C autoignition temperature of uniformly heated hydrogen-air or the {approximately}600{degree}C autoignition temperature of uniformly heated methane-air. The temperatures are substantially lower than the 750{degree}C ignition temperature of hydrogen-air and 1,220{degree}C temperature of methane-air when heated by a 1-m-diameter wire.

  2. Separation medium containing thermally exfoliated graphite oxide

    NASA Technical Reports Server (NTRS)

    Prud'homme, Robert K. (Inventor); Aksay, Ilhan A. (Inventor); Herrera-Alonso, Margarita (Inventor)

    2012-01-01

    A separation medium, such as a chromatography filling or packing, containing a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 m.sup.2/g to 2600 m.sup.2/g, wherein the thermally exfoliated graphite oxide has a surface that has been at least partially functionalized.

  3. Commissioning Ventilated Containment Systems in the Laboratory

    SciTech Connect

    Not Available

    2008-08-01

    This Best Practices Guide focuses on the specialized approaches required for ventilated containment systems, understood to be all components that drive and control ventilated enclosures and local exhaust systems within the laboratory. Geared toward architects, engineers, and facility managers, this guide provides information about technologies and practices to use in designing, constructing, and operating operating safe, sustainable, high-performance laboratories.

  4. 21 CFR 113.60 - Containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., false seam, droop at the crossover or lap, and condition of inside of countersink wall for evidence of...) Countersink. Thickness by micrometer (c) Can double seam terminology: ER01JA93.376 (1) “Crossover”: The... so designed and operated as to preserve the can seam or other container closure integrity....

  5. Fire-Resistant Polyamides Containing Phosphorus

    NASA Technical Reports Server (NTRS)

    Kourtides, Demetrius A.; Mikroyannidis, John A.

    1988-01-01

    Flammability and weight loss reduced. Fire-resistant polymers obtained from 1-{(dialkoxyphosphonyl) methyl}-2, 4- and -2, 6-diaminobenzenes by reaction with acyl or diacyl halides of higher functionality. Incorporation of compounds containing phosphorus into certain polymers shown previously to increase fire retardance. Discovery adds new class of polyamides to group of such polymers.

  6. 21 CFR 113.60 - Containers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    .... Regular observations shall be maintained during production runs for gross closure defects. Any such defects shall be recorded and corrective action taken and recorded. At intervals of sufficient frequency..., length) (2) For glass containers with vacuum closures, capper efficiency must be checked by a...

  7. Analyses of containment structures with corrosion damage

    SciTech Connect

    Cherry, J.L.

    1997-01-01

    Corrosion damage that has been found in a number of nuclear power plant containment structures can degrade the pressure capacity of the vessel. This has prompted concerns regarding the capacity of corroded containments to withstand accident loadings. To address these concerns, finite element analyses have been performed for a typical PWR Ice Condenser containment structure. Using ABAQUS, the pressure capacity was calculated for a typical vessel with no corrosion damage. Multiple analyses were then performed with the location of the corrosion and the amount of corrosion varied in each analysis. Using a strain-based failure criterion, a {open_quotes}lower bound{close_quotes}, {open_quotes}best estimate{close_quotes}, and {open_quotes}upper bound{close_quotes} failure level was predicted for each case. These limits were established by: determining the amount of variability that exists in material properties of typical containments, estimating the amount of uncertainty associated with the level of modeling detail and modeling assumptions, and estimating the effect of corrosion on the material properties.

  8. Bioboxes: standardised containers for interchangeable bioinformatics software.

    PubMed

    Belmann, Peter; Dröge, Johannes; Bremges, Andreas; McHardy, Alice C; Sczyrba, Alexander; Barton, Michael D

    2015-01-01

    Software is now both central and essential to modern biology, yet lack of availability, difficult installations, and complex user interfaces make software hard to obtain and use. Containerisation, as exemplified by the Docker platform, has the potential to solve the problems associated with sharing software. We propose bioboxes: containers with standardised interfaces to make bioinformatics software interchangeable.

  9. Tire containing thermally exfoliated graphite oxide

    NASA Technical Reports Server (NTRS)

    Prud'homme, Robert K. (Inventor); Aksay, Ilhan A. (Inventor)

    2011-01-01

    A tire, tire lining or inner tube, containing a polymer composite, made of at least one rubber and/or at least one elastomer and a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 sq m/g to 2600 sq m/g.

  10. Flywheel rotor and containment technology development

    SciTech Connect

    Kulkarni, S.V.

    1981-08-11

    The goals of the project are: to develop an economical and practical composite flywheel having an energy density of 88 Wh/kg at failure, an operational energy density of 44 to 55 Wh/kg, and an energy storage capacity of approximately 1 kWh; to determine the suitability of various manufacturing processes for low-cost rotor fabrication; to investigate flywheel and flywheel-systems dynamics; to test and evaluate prototype rotors for use in transportation and stationary applications; and to develop a fail-safe, lightweight, and low-cost flywheel containment. The following tasks have been accomplished: evaluation and selection of 1-kWh, first-generation, advanced flywheel rotor designs for subsequent development towards the DOE-established energy density goal of 88 Wh/kg at burst; completion of an advanced design concept for a flywheel primary containment structure, capable of containing the failure of a 1-kWh flywheel rotor and targeted for vehicular applications; non-destructive inspection and burst testing of approximately twenty (20) prototype rotors, and initiation of cyclic testing; completion of various activities in the areas of rotor manufacturing processes, dynamic analyses and composite materials design data generation; and initiation of an economic feasibility study to establish a rational costing methodology for composite rotors and containment.

  11. Aldehyde-containing urea-absorbing polysaccharides

    NASA Technical Reports Server (NTRS)

    Mueller, W. A.; Hsu, G. C.; Marsh, H. E., Jr. (Inventor)

    1977-01-01

    A novel aldehyde containing polymer (ACP) is prepared by reaction of a polysaccharide with periodate to introduce aldehyde groups onto the C2 - C3 carbon atoms. By introduction of ether and ester groups onto the pendant primary hydroxyl solubility characteristics are modified. The ACP is utilized to absorb nitrogen bases such as urea in vitro or in vivo.

  12. Viscoelastic cationic polymers containing the urethane linkage

    NASA Technical Reports Server (NTRS)

    Rembaum, A. (Inventor)

    1972-01-01

    A method for the synthesis and manufacturing of elastomeric compositions and articles containing quaternary nitrogen centers and condensation residues along the polymeric backbone of the centers is presented. Linear and cross-linked straight chain and block polymers having a wide damping temperature range were synthesized. Formulae for the viscoelastic cationic polymers are presented.

  13. Preservation of Mercury in Polyethylene Containers.

    ERIC Educational Resources Information Center

    Piccolino, Samuel Paul

    1983-01-01

    Reports results of experiments favoring use of 0.5 percent nitric acid with an oxidant (potassium dichromate or potassium permanganate) to preserve samples in polyethylene containers for mercury analysis. Includes procedures used and statistical data obtained from the experiments. (JN)

  14. DISSOLUTION OF ZIRCONIUM-CONTAINING FUEL ELEMENTS

    DOEpatents

    Horn, F.L.

    1961-12-12

    Uranium is recovered from spent uranium fuel elements containing or clad with zirconium. These fuel elements are placed in an anhydrous solution of hydrogen fluoride and nitrogen dioxide. Within this system uranium forms a soluble complex and zirconium forms an insoluble complex. The uranium can then be separated, treated, and removed from solution as uranium hexafluoride. (AEC)

  15. Some NUDET effects due to water containment

    SciTech Connect

    Symbalisty, E.M.D.

    1994-07-01

    The effect on the optical and acoustical signals of containing a nominal low yield nuclear device in a sphere of water is studied. The silicon photodiode optical signal is seen to be distorted by a relatively small amount of water. The acoustical signal timing and shape change little.

  16. Divertor target for magnetic containment device

    DOEpatents

    Luzzi, Jr., Theodore E.

    1982-01-01

    In a plasma containment device of a type having superconducting field coils for magnetically shaping the plasma into approximately the form of a torus, an improved divertor target for removing impurities from a "scrape off" region of the plasma comprises an array of water cooled swirl tubes onto which the scrape off flux is impinged. Impurities reflected from the divertor target are removed from the target region by a conventional vacuum getter system. The swirl tubes are oriented and spaced apart within the divertor region relative to the incident angle of the scrape off flux to cause only one side of each tube to be exposed to the flux to increase the burnout rating of the target. The divertor target plane is oriented relative to the plane of the path of the scrape off flux such that the maximum heat flux onto a swirl tube is less than the tube design flux. The containment device is used to contain the plasma of a tokamak fusion reactor and is applicable to other long pulse plasma containment systems.

  17. 7 CFR 917.12 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Container. 917.12 Section 917.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN...

  18. 7 CFR 917.12 - Container.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Container. 917.12 Section 917.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN...

  19. 7 CFR 917.12 - Container.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Container. 917.12 Section 917.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN...

  20. 7 CFR 917.12 - Container.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Container. 917.12 Section 917.12 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN...

  1. MATCON MODIFIED ASPHALT COVER CONTAINMENT SYSTEM DEMONSTRATION

    EPA Science Inventory

    In order to make improvements to conventional paving asphalt to make it more suitable for containment applications, Wilder Construction Co. of Everett, WA offers MatCon, a polymer modified asphalt system comprised of proprietary binder, when coupled with a selected aggregate type...

  2. 7 CFR 920.14 - Container.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Container. 920.14 Section 920.14 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE KIWIFRUIT GROWN IN...

  3. Lubricating oil compositions containing modified succinimides

    SciTech Connect

    Wollenberg, R.H.

    1987-05-05

    A lubricating oil composition is described comprising an oil of lubricating viscosity and from 0.2 to 10 percent by weight of a product produced by the process. A temperature is contacted sufficient to cause reaction. A polyamino alkenyl or alkyl succinimide contains at least one primary or secondary amine and a compound. A formula is given.

  4. 40 CFR 264.175 - Containment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2... remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are... enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from...

  5. 40 CFR 264.175 - Containment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2... remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are... enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from...

  6. 40 CFR 264.175 - Containment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2... remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are... enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from...

  7. 40 CFR 264.175 - Containment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2... remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are... enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from...

  8. 40 CFR 264.175 - Containment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2... remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are... enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from...

  9. Metallocene catalyst containing bulky organic group

    DOEpatents

    Marks, Tobin J.; Ja, Li; Yang, Xinmin

    1996-03-26

    An ionic metallocene catalyst for olefin polymerization which comprises: (1) a cyclopentadienyl-type ligand, a Group IVB transition metal, and alkyl, aryl, or hydride substituents, as a cation, and (2) a weakly coordinating anion comprising boron substituted with halogenated, such as tetra fluoro, aryl substituents preferably containing silylalkyl substitution, such as para-silyl t-butyldimethyl.

  10. Metallocene catalyst containing bulky organic group

    DOEpatents

    Marks, T.J.; Ja, L.; Yang, X.

    1996-03-26

    An ionic metallocene catalyst for olefin polymerization which comprises: (1) a cyclopentadienyl-type ligand, a Group IVB transition metal, and alkyl, aryl, or hydride substituents, as a cation, and (2) a weakly coordinating anion comprising boron substituted with halogenated, such as tetrafluoro-aryl substituents preferably containing silylalkyl substitution, such as para-silyl t-butyldimethyl.

  11. Valuation effects of health cost containment measures.

    PubMed

    Strange, M L; Ezzell, J R

    2000-01-01

    This study reports the findings of research into the valuation effects of health cost containment activities by publicly traded corporations. The motivation for this study was employers' increasing cost of providing health care insurance to their employees and employers' efforts to contain those costs. A 1990 survey of corporate health benefits indicated that these costs represented 25 percent of employers' net earnings and this would rise by the year 2000 if no actions were taken to reduce cost. Health cost containment programs that are implemented by firms should be seen by shareholders as a wealth maximizing effort. As such, this should be reflected in share price. This study employed standard event study methodology where the event is a media announcement or report regarding an attempt by a firm to contain the costs of providing health insurance and other health related benefits to employees. It examined abnormal returns on a number of event days and for a number of event intervals. Of the daily and interval returns that are least significant at the 10 percent level, virtually all are negative. Cross-sectional analysis shows that the abnormal returns are related negatively to a unionization variable.

  12. VVER-440 Containment Thermal Hydraulic Analyses With MELCOR and CONTAIN Codes

    SciTech Connect

    Gromov, Gregory; Lola, Igor; Sholomitsky, Stanislav; Gumenyuk, Dmitry; Shikhabutinov, Valery; Alekseev, Yury; Wagner, K.C.; Dallman, Jack

    2002-07-01

    In support of the analyses for the Rivne Nuclear Power Plant (RNPP) VVER-440/213 (Ukraine) Safety Analysis Report (SAR), detailed MELCOR and CONTAIN models of the containment were developed. The RNPP containment features a bubble condenser tower with air locks and active and passive spray systems. Code input models were developed to accurately represent the containment volumes, room interconnections, structural masses, and the engineering safety features. Although MELCOR 1.8.3 was the primary tool for the SAR containment analysis, comparison calculations were performed using CONTAIN Version 1.12. Consequently, both the response of the VVER-440 containment to limiting design conditions as well as a comparison of the two codes is presented. In the context of SAR requirements, the present application was performed for design basis accidents with conservative assumptions to compare the containment temperature and pressure with design criteria. The peak containment pressure and temperature were evaluated using the most intensive release of the primary and secondary coolant into the hermetic compartments, in particular, for the large break loss of coolant accident and main steam line break. Conservative coolant release data were evaluated using the RELAP5/Mod3.2 SAR model. The selection of the accident scenario, initial and boundary conditions, and the major results are presented. The results of the analyses will be included in the design basis accident analysis chapter of the RNPP SAR. (authors)

  13. Containment performance of prototypical reactor containments subjected to severe accident conditions

    SciTech Connect

    Klamerus, E.W.; Bohn, M.P.; Wesley, D.A.; Krishnaswamy, C.N.

    1996-12-01

    In SECY-90-016, the NTRC proposed a safety goal of a conditional containment failure probability (CCFP) of 0.1 and the alternative acceptance criteria allowed for steel containments, which specifies that the stresses should not exceed ASNE Level C allowables for severe accident pressures and temperatures. In this work, the need for an equivalent criterion for concrete containments was studied. Six surrogate containments were designed and analyzed in order to compare the margins between design pressure, pressure resulting in exceedance of Level C (or yield) stress limits, and ultimate pressure. For comparability, each containment has an identical internal volume and design pressure. Results from the analysis showed margins to yield are comparable and display a similar margin for both steel and concrete containments. In addition, the margin to failure, although slightly higher in the steel containments, were also comparable. Finally, a CCFP for code design was determined based on general membrane behavior and imposing an upper bound severe accident curve developed in the DCH studies. The resulting CCFP`s were less then 0.02 (or 2%) for all the surrogate containments studied, showing that these containment designs all achieved the NRC safety goal.

  14. 40 CFR 264.171 - Condition of containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Condition of containers. 264.171... Use and Management of Containers § 264.171 Condition of containers. If a container holding hazardous... leak, the owner or operator must transfer the hazardous waste from this container to a container...

  15. 40 CFR 265.171 - Condition of containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Condition of containers. 265.171... DISPOSAL FACILITIES Use and Management of Containers § 265.171 Condition of containers. If a container... transfer the hazardous waste from this container to a container that is in good condition, or manage...

  16. Container inspection in the port container terminal by using 14 MeV neutrons

    SciTech Connect

    Valkovic, Vladivoj; Sudac, Davorin; Nad, Karlo; Obhodas, Jasmina

    2015-07-01

    A proposal for an autonomous and flexible ship container inspection system is presented. This could be accomplished by the incorporation of inspection system on the container transportation devices (straddle carriers, yard gentry cranes automated guided vehicles, trailers). This configuration is terminal specific and it will be decided by container terminal operator. In such a way no part of port operational area will be used for inspection. The inspection scenario will include container transfer from ship to transportation device with inspection unit mounted on it, inspection during container movement to the container location. A neutron generator without associated alpha particle detection will be used. This will allow the use of higher neutron intensity (5x10{sup 9} - 10{sup 10} n/s in 4π). The inspected container will be stationary in the 'inspection position' on the transportation device while the 'inspection unit' will move along its side. Following analytical methods will be used simultaneously: neutron radiography, X-ray radiography, neutron activation analysis, (n,γ) and (n,n'γ) reactions, neutron absorption, and scattering, X-ray backscattering, Neutron techniques will take the advantage of using 'smart collimators' for neutrons and gammas, both emitted and detected. The inspected voxel will be defined by intersections/union of neutron generator and detectors solid angles. The container inspection protocol will be based on identification of discrepancies between its cargo manifest and its elemental 'fingerprint' and radiography profiles. In addition, the information on container weight will be obtained during the container transport and foreseen screening from the measurement of density of material in the container. (authors)

  17. Faster Parameterized Algorithms for Minor Containment

    NASA Astrophysics Data System (ADS)

    Adler, Isolde; Dorn, Frederic; Fomin, Fedor V.; Sau, Ignasi; Thilikos, Dimitrios M.

    The theory of Graph Minors by Robertson and Seymour is one of the deepest and significant theories in modern Combinatorics. This theory has also a strong impact on the recent development of Algorithms, and several areas, like Parameterized Complexity, have roots in Graph Minors. Until very recently it was a common belief that Graph Minors Theory is mainly of theoretical importance. However, it appears that many deep results from Robertson and Seymour's theory can be also used in the design of practical algorithms. Minor containment testing is one of algorithmically most important and technical parts of the theory, and minor containment in graphs of bounded branchwidth is a basic ingredient of this algorithm. In order to implement minor containment testing on graphs of bounded branchwidth, Hicks [NETWORKS 04] described an algorithm, that in time O(3^{k^2}\\cdot (h+k-1)!\\cdot m) decides if a graph G with m edges and branchwidth k, contains a fixed graph H on h vertices as a minor. That algorithm follows the ideas introduced by Robertson and Seymour in [J'CTSB 95]. In this work we improve the dependence on k of Hicks' result by showing that checking if H is a minor of G can be done in time O(2^{(2k +1 )\\cdot log k} \\cdot h^{2k} \\cdot 2^{2h^2} \\cdot m). Our approach is based on a combinatorial object called rooted packing, which captures the properties of the potential models of subgraphs of H that we seek in our dynamic programming algorithm. This formulation with rooted packings allows us to speed up the algorithm when G is embedded in a fixed surface, obtaining the first single-exponential algorithm for minor containment testing. Namely, it runs in time 2^{O(k)} \\cdot h^{2k} \\cdot 2^{O(h)} \\cdot n, with n = |V(G)|. Finally, we show that slight modifications of our algorithm permit to solve some related problems within the same time bounds, like induced minor or contraction minor containment.

  18. 75 FR 33744 - Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Proposed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... AGENCY 40 CFR Part 156 RIN 2070-AJ74 Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Proposed Change to Labeling Compliance Date AGENCY: Environmental Protection... August 16, 2010 to August 16, 2011. This change is being proposed to address concerns raised...

  19. 75 FR 62323 - Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Change to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-08

    ...-0327; FRL-8848-8] RIN 2070-AJ74 Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Change to Labeling Compliance Date AGENCY: Environmental Protection Agency (EPA.... This change is being made to provide additional time for pesticide registrants to revise labels...

  20. 75 FR 33705 - Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Change to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... AGENCY 40 CFR Part 156 RIN 2070-AJ74 Pesticide Management and Disposal; Standards for Pesticide Containers and Containment; Change to Labeling Compliance Date AGENCY: Environmental Protection Agency (EPA... December 16, 2010. This change is being made because there is insufficient time for pesticide...

  1. 10 CFR 35.75 - Release of individuals containing unsealed byproduct material or implants containing byproduct...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Release of individuals containing unsealed byproduct material or implants containing byproduct material. 35.75 Section 35.75 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL General Technical Requirements § 35.75 Release of...

  2. 10 CFR 35.75 - Release of individuals containing unsealed byproduct material or implants containing byproduct...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Release of individuals containing unsealed byproduct material or implants containing byproduct material. 35.75 Section 35.75 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL General Technical Requirements § 35.75 Release of...

  3. 10 CFR 35.75 - Release of individuals containing unsealed byproduct material or implants containing byproduct...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Release of individuals containing unsealed byproduct material or implants containing byproduct material. 35.75 Section 35.75 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL General Technical Requirements § 35.75 Release of...

  4. 10 CFR 35.75 - Release of individuals containing unsealed byproduct material or implants containing byproduct...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Release of individuals containing unsealed byproduct material or implants containing byproduct material. 35.75 Section 35.75 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL General Technical Requirements § 35.75 Release of...

  5. 75 FR 43536 - Agency Information Collection Activities: Permit To Transfer Containers to a Container Station

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-26

    ... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Permit To Transfer Containers to a Container Station AGENCY: U.S. Customs and Border Protection, Department of Homeland Security...-0049. SUMMARY: U.S. Customs and Border Protection (CBP) of the Department of Homeland Security will...

  6. Isotope exchange in oxide-containing catalyst

    NASA Technical Reports Server (NTRS)

    Brown, Kenneth G. (Inventor); Upchurch, Billy T. (Inventor); Hess, Robert V. (Inventor); Miller, Irvin M. (Inventor); Schryer, David R. (Inventor); Sidney, Barry D. (Inventor); Wood, George M. (Inventor); Hoyt, Ronald F. (Inventor)

    1989-01-01

    A method of exchanging rare-isotope oxygen for common-isotope oxygen in the top several layers of an oxide-containing catalyst is disclosed. A sample of an oxide-containing catalyst is exposed to a flowing stream of reducing gas in an inert carrier gas at a temperature suitable for the removal of the reactive common-isotope oxygen atoms from the surface layer or layers of the catalyst without damaging the catalyst structure. The reduction temperature must be higher than any at which the catalyst will subsequently operate. Sufficient reducing gas is used to allow removal of all the reactive common-isotope oxygen atoms in the top several layers of the catalyst. The catalyst is then reoxidized with the desired rare-isotope oxygen in sufficient quantity to replace all of the common-isotope oxygen that was removed.

  7. Dehydration resistance of liposomes containing trehalose glycolipids

    NASA Astrophysics Data System (ADS)

    Nyberg, Kendra; Goulding, Morgan; Parthasarathy, Raghuveer

    2010-03-01

    The pathogen, Mycobacterium tuberculosis, has an unusual outer membrane containing trehalose glycolipids that may contribute to its ability to survive freezing and dehydration. Based on our recent discovery that trehalose glycolipids confer dehydration resistance to supported lipid monolayers (Biophys. J. 94: 4718-4724 (2008); Langmuir 25: 5193-5198, (2009)), we hypothesized that liposomes containing synthetic trehalose glycolipids may be dehydration-resistant as well. To test this, we measured the leakage of encapsulated fluorophores and larger macromolecular cargo from such liposomes subject to freeze drying. Both leakage assays and size measurements show that the liposomes are dehydration-resistant. In addition to demonstrating a possibly technologically useful encapsulation platform, our results corroborate the view that encapsulation in a trehalose-glycolipid-rich membrane is a biophysically viable route to protection of mycobacteria from environmental stresses.

  8. Multi-layer waste containment barrier

    SciTech Connect

    Smith, Ann Marie; Gardner, Bradley M.; Nickelson, David F.

    1999-01-01

    An apparatus for constructing an underground containment barrier for containing an in-situ portion of earth. The apparatus includes an excavating device for simultaneously (i) excavating earthen material from beside the in-situ portion of earth without removing the in-situ portion and thereby forming an open side trench defined by opposing earthen sidewalls, and (ii) excavating earthen material from beneath the in-situ portion of earth without removing the in-situ portion and thereby forming a generally horizontal underground trench beneath the in-situ portion defined by opposing earthen sidewalls. The apparatus further includes a barrier-forming device attached to the excavating device for simultaneously forming a side barrier within the open trench and a generally horizontal, multi-layer barrier within the generally horizontal trench. The multi-layer barrier includes at least a first layer and a second layer.

  9. [Experience with gestodene-containing hormonal contraceptive].

    PubMed

    Szabó, L; Nagy, K; Godó, G

    1998-03-01

    An oral contraceptive containing gestodene (Minulet) was examined in collaborating with the Richter-Wyeth Pharmaceutical Factory. The authors present their experiences of monitoring of 591 cycles of a hundred women between 18 and 35 years of age. There were no pregnancy and severe side effects during that period. Irregular bleeding occurred in 17.5% of women in the beginning of the treatment, however it gradually decreased and ceased by the fifth cycle. Both the length and the quantity of the withdrawal bleeding decreased by the end of the sixth cycle. During the observation there was no amenorrhoea and the dysmenorrhoea presented a decreasing tendency, expressing in per cent of the cycles. Their own data support, that the oral contraceptives containing gestodene meet requirements of today's medical science, and beyond the low hormone content they also fulfil the next demands: reliable contraceptive effect, efficacy, excellent cycle control, good tolerability and limited side effects.

  10. Recombinant thiopeptides containing noncanonical amino acids

    PubMed Central

    Luo, Xiaozhou; Zambaldo, Claudio; Liu, Tao; Zhang, Yuhan; Xuan, Weimin; Wang, Chen; Reed, Sean A.; Yang, Peng-Yu; Wang, Rongsheng E.; Javahishvili, Tsotne; Schultz, Peter G.; Young, Travis S.

    2016-01-01

    Thiopeptides are a subclass of ribosomally synthesized and posttranslationally modified peptides (RiPPs) with complex molecular architectures and an array of biological activities, including potent antimicrobial activity. Here we report the generation of thiopeptides containing noncanonical amino acids (ncAAs) by introducing orthogonal amber suppressor aminoacyl-tRNA synthetase/tRNA pairs into a thiocillin producer strain of Bacillus cereus. We demonstrate that thiopeptide variants containing ncAAs with bioorthogonal chemical reactivity can be further postbiosynthetically modified with biophysical probes, including fluorophores and photo-cross-linkers. This work allows the site-specific incorporation of ncAAs into thiopeptides to increase their structural diversity and probe their biological activity; similar approaches can likely be applied to other classes of RiPPs. PMID:26976568

  11. TRUPACT-II residue pipe payload container

    SciTech Connect

    Geinitz, R.; Gregory, P.

    1995-06-01

    This paper summarizes the project to develop, test and certify a new payload container for the TRUPACT-II, a Type B packaging for the shipment of transuranic waste. The new payload container will provide segregation of plutonium waste materials within the TRUPACT-II. This segregation of fissile contents will support a new criticality safety analysis that may allow an increase in the TRUPACT-II Pu-239 Fissile Gram Equivalent (FGE) limit from 325 grams to 2800 grams. The need for this project was brought about by the end of the Cold War and the resulting shift in value of plutonium residues from providing recoverable Defense Program material to being considered disposable waste. This paper will not cover many of the details of the project but will instead aim to provide a general picture of all the project activities.

  12. Transparent monolithic metal ion containing nanophase aerogels

    SciTech Connect

    Risen, W. M., Jr.; Hu, X.; Ji, S.; Littrell, K.

    1999-12-01

    The formation of monolithic and transparent transition metal containing aerogels has been achieved through cooperative interactions of high molecular weight functionalized carbohydrates and silica precursors, which strongly influence the kinetics of gelation. After initial gelation, subsequent modification of the ligating character of the system, coordination of the group VIII metal ions, and supercritical extraction afford the aerogels. The structures at the nanophase level have been probed by photon and electron transmission and neutron scattering techniques to help elucidate the basis for structural integrity together with the small entity sizes that permit transparency in the visible range. They also help with understanding the chemical reactivities of the metal-containing sites in these very high surface area materials. These results are discussed in connection with new reaction studies.

  13. Silver nanoparticle containing silk fibroin bionanotextiles

    NASA Astrophysics Data System (ADS)

    Calamak, Semih; Aksoy, Eda Ayse; Erdogdu, Ceren; Sagıroglu, Meral; Ulubayram, Kezban

    2015-02-01

    Development of new generation bionanotextiles is an important growing field, and they have found applications as wound dressings, bandages, tissue scaffolds, etc. In this study, silver nanoparticle (AgNP) containing silk-based bionanotextiles were fabricated by electrospinning, and processing parameters were optimized and discussed in detail. AgNPs were in situ synthesized within fibroin nanofibers by UV reduction of silver ions to metallic silver. The influence of post-treatments via methanol treatment and glutaraldehyde (GA) vapor exhibited changes in the secondary structure of silk. Methanol treatment increased the tensile properties of fibers due to supported crystalline silk structure, while GA vapor promoted amorphous secondary structure. AgNP containing silk fibroin bionanotextiles had strong antibacterial activity against gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa.

  14. Metal dusting of nickel-containing alloys

    SciTech Connect

    Baker, B.A.; Smith, G.D.

    1998-12-31

    Metal dusting is a catastrophic form of carburization which leads to pitting and grooves as the affected metal disintegrates into a mixture of powdery carbon, metallic particles, and possibly oxides and carbides. This high temperature carburization mode is not yet well understood and while relatively infrequent, can be economically disastrous when it does occur in large and complex chemical and petrochemical process streams. References in the literature show that all classes of heat resistant alloys are prone to metal dusting, given the necessary and specific environmental conditions. These same references describe the environments that plague nickel-containing alloys and are used as the basis for postulation on the probable corrosion mechanisms responsible for metal dusting. Using alloy 800 and other nickel-containing alloys and metal dusting atmospheres, an effort is made to examine the steps in the metal dusting process and the temperature ranges over which metal dusting occurs.

  15. Development of Mullite Substrates and Containers

    NASA Technical Reports Server (NTRS)

    Sibold, J. D.

    1979-01-01

    The mullite-molten silicon interaction was evaluated through fabrication of a series of bodies made with variations in density, alumina-silica ratio, and glass-crystalline ratio. The materials were tested in a sessile drop technique. None of the variations stood up to extended exposure to molten silicon sufficiently to be recommended as a container material. However, directional solidification experiments suggest that, under proper conditions, contamination of the silicon by mullite containers can be minimized. To improve an already good thermal expansion match between mullite and silicon, compositional variations were studied. Altering of the alumina-silica ratio was determined to give a continuously varying thermal expansion. A standard mullite composition was selected and substrates 40 x 4 x .040 inches were fabricated. Slotted substrates of various configurations and various compositions were also fabricated.

  16. Microfluidic Pumps Containing Teflon [Trademark] AF Diaphragms

    NASA Technical Reports Server (NTRS)

    Willis, Peter; White, Victor; Grunthaner, Frank; Ikeda, Mike; Mathies, Richard A.

    2009-01-01

    Microfluidic pumps and valves based on pneumatically actuated diaphragms made of Teflon AF polymers are being developed for incorporation into laboratory-on-a-chip devices that must perform well over temperature ranges wider than those of prior diaphragm-based microfluidic pumps and valves. Other potential applications include implanted biomedical microfluidic devices, wherein the biocompatability of Teflon AF polymers would be highly advantageous. These pumps and valves have been demonstrated to function stably after cycling through temperatures from -125 to 120 C. These pumps and valves are intended to be successors to similar prior pumps and valves containing diaphragms made of polydimethylsiloxane (PDMS) [commonly known as silicone rubber]. The PDMS-containing valves ae designed to function stably only within the temperature range from 5 to 80 C. Undesirably, PDMS membranes are somwehat porous and retain water. PDMS is especially unsuitable for use at temperatures below 0 C because the formation of ice crystals increases porosity and introduces microshear.

  17. Models of iodine behavior in reactor containments

    SciTech Connect

    Weber, C.F.; Beahm, E.C.; Kress, T.S.

    1992-10-01

    Models are developed for many phenomena of interest concerning iodine behavior in reactor containments during severe accidents. Processes include speciation in both gas and liquid phases, reactions with surfaces, airborne aerosols, and other materials, and gas-liquid interface behavior. Although some models are largely empirical formulations, every effort has been made to construct mechanistic and rigorous descriptions of relevant chemical processes. All are based on actual experimental data generated at the Oak Ridge National Laboratory (ORNL) or elsewhere, and, hence, considerable data evaluation and parameter estimation are contained in this study. No application or encoding is attempted, but each model is stated in terms of rate processes, with the intention of allowing mechanistic simulation. Taken together, this collection of models represents a best estimate iodine behavior and transport in reactor accidents.

  18. Provisions for containment venting in Germany

    SciTech Connect

    Wilhelm, J.G.

    1997-08-01

    In this short paper an overlook is given of the systems developed in Germany for filtered containment venting and their implementation in nuclear power plants. More information on the development can be found in the Proceedings of the DOE/NRC Aircleaning Conferences. In Germany, 28.8 % of the electric energy is produced by 19 nuclear power reactors. No new power reactor is expected to be built at least within the next ten years, but France and Germany cooperate in the development of a future European Power Reactor (ERP). This reactor type will be fitted with a core catcher and passive cooling in order to avoid serious consequences of a hypothetical core meltdown accident so that provisions for containment venting are not required. 3 refs., 6 figs., 1 tab.

  19. CONTAIN assessment of the NUPEC mixing experiments

    SciTech Connect

    Stamps, D.W.

    1995-08-01

    The ability of the CONTAIN code to predict the thermal hydraulics of five experiments performed in the NUPEC 1/4-scale model containment was assessed. These experiments simulated severe accident conditions in a nuclear power plant in which helium (as a nonflammable substitute for hydrogen) and steam were coinjected at different locations in the facility with and without the concurrent injection of water sprays in the dome. Helium concentrations, gas temperatures and pressures, and wall temperatures were predicted and compared with the data. The use of different flow solvers, nodalization schemes, and analysis methods for the treatment of water sprays was emphasized. As a result, a general procedure was suggested for lumped-parameter code analyses of problems in which the thermal hydraulics are dominated by water sprays.

  20. Electric power annual 1989. [Contains glossary

    SciTech Connect

    Not Available

    1991-01-17

    This publication presents a summary of electric utility statistics at the national, regional and state levels. The Industry At A Glance'' section presents a profile of the electric power industry ownership and performance; a review of key statistics for the year; and projections for various aspects of the electric power industry through 2010. Subsequent sections present data on generating capability, including proposed capability additions; net generation; fossil-fuel statistics; electricity sales, revenue and average revenue per kilowatthour sold; financial statistics; environmental statistics; and electric power transactions. In addition, the appendices provide supplemental data on major disturbances and unusual occurrences. Each section contains related text and tables and refers the reader to the appropriate publication that contains more detailed data on the subject matter. 24 figs., 57 tabs.

  1. Xerox's closed recycling loop still contains kinks

    SciTech Connect

    Not Available

    1995-02-01

    Xerox Corp. has established a recycling loop for plastics screw-top toner bottles and dry-ink containers used in most of the company's high-volume copiers. However, a severe shortage of post-consumer recycled plastic has been short-circuiting Xerox's good intentions. Last year, the Stamford, Conn.-based company stopped manufacturing toner containers from virgin plastics and instead began using recycled raw materials, such as discarded milk and water jugs collected from municipal curbside recycling programs. The bottles are ground and remolded into such products as air filters for vacuum cleaners, plastic lumber, compost bins, landscape ties, benches and fence posts. However, what sounds like a win-win situation actually is costing too much money. Contrary to popular belief, post-consumer recycled plastic costs more than virgin plastic. Despite the added expense, Xerox will continue to use recycled plastics when possible.

  2. SULPHUR DIOXIDE LEACHING OF URANIUM CONTAINING MATERIAL

    DOEpatents

    Thunaes, A.; Rabbits, F.T.; Hester, K.D.; Smith, H.W.

    1958-12-01

    A process is described for extracting uranlum from uranium containing material, such as a low grade pitchblende ore, or mill taillngs, where at least part of the uraniunn is in the +4 oxidation state. After comminuting and magnetically removing any entrained lron particles the general material is made up as an aqueous slurry containing added ferric and manganese salts and treated with sulfur dioxide and aeration to an extent sufficient to form a proportion of oxysulfur acids to give a pH of about 1 to 2 but insufficient to cause excessive removal of the sulfur dioxide gas. After separating from the solids, the leach solution is adjusted to a pH of about 1.25, then treated with metallic iron in the presence of a precipitant such as a soluble phosphate, arsonate, or fluoride.

  3. Contained colonic perforation due to cecal retroflexion.

    PubMed

    Geng, Zhuo; Agrawal, Deepak; Singal, Amit G; Kircher, Stephen; Gupta, Samir

    2016-03-21

    Complications of cecal retroflexion performed during colonoscopy have not previously been reported to occur. We report a case of contained colonic perforation secondary to using cecal retroflexion technique to examine the colon, and review available published reports of complications associated with this technique. We conclude that complications may rarely occur with use of cecal retroflexion, and that the clinical benefit of this technique is uncertain.

  4. Inspection In Overhead Spaces Containing Asbestos

    NASA Technical Reports Server (NTRS)

    Bell, Jacque; Hartwick, George; Hutcherson, Jerry

    1989-01-01

    Procedure for inspection in spaces above dropped ceilings that contain asbestos saves time and effort without sacrificing safety. With new method, only items of safety equipment needed are glove bag, storage bag, and roll of adhesive tape. Inspector tapes glove bag tightly to support grid around ceiling tile to be removed. With hands in gloves inspector lifts tile gently and places it aside. Extending head and shoulders into bag, inspector examines space above ceiling with help of flashlight.

  5. Mineralogical conversion of asbestos containing materials

    SciTech Connect

    Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

    1996-12-31

    The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the {open_quotes}cradle to grave{close_quotes} ownership liabilities.

  6. Scanning Cargo Containers with Tagged Neutrons

    SciTech Connect

    Viesti, G.; Botosso, C.; Fabris, D.; Lunardon, M.; Moretto, S.; Nebbia, G.; Pesente, S.; Zenoni, A.; Donzella, A.; Perot, B.; Carasco, C.; Bernard, S.; Mariani, A.; Szabo, J.-L.; Sannie, G.; Valkovic, V.; Sudac, D.; Nad, K.; Peerani, P.; Sequeira, V.

    2007-10-26

    A new Tagged Neutron Inspection System (TNIS) able to detect illicit materials such as explosives and narcotics in cargo containers has been developed within the EURopean Illicit TRAfficing Countermeasures Kit (EURITRACK) project. After the R and D phase, the inspection portal has been installed and commissioned at the Rijeka seaport in Croatia, where it has been operated in connection with the existing X-ray scanner for a first two-month demonstration campaign. Results obtained are presented and discussed in this paper.

  7. Scanning Cargo Containers with Tagged Neutrons

    NASA Astrophysics Data System (ADS)

    Viesti, G.; Botosso, C.; Fabris, D.; Lunardon, M.; Moretto, S.; Nebbia, G.; Pesente, S.; Zenoni, A.; Donzella, A.; Perot, B.; Carasco, C.; Bernard, S.; Mariani, A.; Szabo, J.-L.; Sannie, G.; Valkovic, V.; Sudac, D.; Nad, K.; Peerani, P.; Sequeira, V.; Salvato, M.; Moszynski, M.; Gierlik, M.; Klamra, W.; Le Tourneur, P.; Lhuissier, M.; Colonna, A.; Tintori, C.

    2007-10-01

    A new Tagged Neutron Inspection System (TNIS) able to detect illicit materials such as explosives and narcotics in cargo containers has been developed within the EURopean Illicit TRAfficing Countermeasures Kit (EURITRACK) project. After the R&D phase, the inspection portal has been installed and commissioned at the Rijeka seaport in Croatia, where it has been operated in connection with the existing X-ray scanner for a first two-month demonstration campaign. Results obtained are presented and discussed in this paper.

  8. Electrically conductive polyimides containing silver trifluoroacetylacetonate

    NASA Technical Reports Server (NTRS)

    Rancourt, James D. (Inventor); Stoakley, Diane M. (Inventor); Caplan, Maggie L. (Inventor); St. Clair, Anne K. (Inventor); Taylor, Larry T. (Inventor)

    1996-01-01

    Polyimides with enhanced electrical conductivity are produced by adding a silver ion-containing additive to the polyamic acid resin formed by the condensation of an aromatic dianhydride with an aromatic diamine. After thermal treatment the resulting polyimides had surface conductivities in the range of 1.7.times.10.sup.-3 4.5 .OMEGA..sup.-1 making them useful in low the electronics industry as flexible, electrically conductive polymeric films and coatings.

  9. PRODUCTION OF FLUORINE-CONTAINING HYDROCARBON

    DOEpatents

    Sarsfield, N.F.

    1949-08-01

    This patent relates to improvements in the production of fluorine- containing hydrocarbon derivatives. The process for increasing the degree of fluorination of a fluorochlorohydrocarbon comprises subjecting a highly fluorinated fluorochlorohydrocarbon to the action of a dehydrochlorinating agent, and treating the resulting unsaturated body with fluorine, cobalt trifluoride, or silver difluoride. A number of reagents are known as dehydrochlorinaling agents, including, for example, the caustic alkalies, either in an anhydrous condition or dissolved in water or a lower aliphatic alcohol.

  10. Electrically conductive palladium-containing polyimide films

    NASA Technical Reports Server (NTRS)

    St.clair, A. K.; Furtsch, T. A.; Taylor, L. T.

    1981-01-01

    Palladium addition makes light, flexible film with low resistivity to relieve space charging. Polyimide film is prepared in four steps: preparation of polyamic acid in polar solvent; addition of soluable palladium complex salt; fabrication of film of "palladium polyamic acid" solution; and thermal imidization of film to palladium-containing polyimide by 300 C heating. Lowered resistivities were achieved without loss in film flexibility or increase in film weight.

  11. Perfluoroalkyl polytriazines containing pendent iododifluoromethyl groups

    NASA Technical Reports Server (NTRS)

    Rosser, R. W.; Psarras, T. (Inventor)

    1980-01-01

    New perfluoroalkyl polytriazines containing pendent iododifluoromethyl groups are prepared by the reaction of perfluoroalkyl dinitriles with ammonia to form poly(imidoylamidines), followed by the cyclization of the imidoylamidine groups with, e.g., various mixtures of a perfluoroacyl fluoride with an omega iodoperfluoroacyl fluoride. The polytriazines obtained can be cured by heat which causes crosslinking at the iododifluoromethyl groups by elimination of iodine and formation of carbon-to-carbon bonds.

  12. DS2 Container and Weatherproofing Study

    DTIC Science & Technology

    1990-12-01

    container manufacturers, air pollution mitigators ) (5 firms) * Businesses with no desire to accept Government or military contracts (2 firms) * Dropped...A CrUdeoii A L.actic acid A Suipiuri ac;;c (40%11 Cycionexans A 1 01. roiC ScId (40%) A Magnesium chloride 9 Ta, raethy lead A Chlorine Water ($at...processed on most common converting and packaging machinery. Very few films combine so many desirable qualities as ACLAR. It is: - Unsurpassed in

  13. Metal Containing Polymers as Fuel Cell Catalysts.

    DTIC Science & Technology

    1987-06-30

    AvjilLib:I:W. C, s IAvoi! ~ or Dist Spo.:11 TRLE OF CONTENTS Introduction 1 Results 3 Electrocatalyst Synthesis and Characterization 3 Rationale 3...collector may be effected by a number of mechanisms. � 3 ELECTRODECATALYST SYNTHESIS AND CHARACTERIZATION Rational e The synthetic objectives of the...orometnyl polystyrene to yield a diketone contain- ing polymer. These 1 i:ter two polymers 3re particularly interesting in t, - tney pose in alternative to

  14. High Energy Failure Containment for Spacecraft

    NASA Technical Reports Server (NTRS)

    Pektas, Pete; Baker, Christopher

    2011-01-01

    Objective: The objective of this paper will be to investigate advancements and any commonality between spacecraft debris containment and the improvements being made in ballistic protection. Scope: This paper will focus on cross application of protection devices and methods, and how they relate to protecting humans from failures in spacecraft. The potential gain is to reduce the risk associated with hardware failure, while decreasing the weight and size of energy containment methods currently being used by the government and commercial industry. Method of Approach: This paper will examine testing that has already been accomplished in regards to the failure of high energy rotating hardware and compare it to advancements in ballistic protection. Examples are: DOT research and testing of turbine containment as documented in DOT/FAA/AR-96/110, DOT/FAA/AR-97/82, DOT/FAA/AR-98/22. It will also look at work accomplished by companies such as ApNano and IBD Deisenroth in the development of nano ceramics and nanometric steels. Other forms of energy absorbent materials and composites will also be considered and discussed. New Advances in State of the Art: There have been numerous advances in technology in regards to high energy debris containment and in the similar field of ballistic protection. This paper will discuss methods such as using impregnated or dry Kevlar, ceramic, and nano-technology which have been successfully tested but are yet to be utilized in spacecraft. Reports on tungsten disulfide nanotubes claim that they are 4-5 times stronger than steel and reports vary about the magnitude increase over Kevlar, but it appears to be somewhere in the range of 2-6 times stronger. This technology could also have applications in the protection of pressure vessels, motor housings, and hydraulic component failures.

  15. Emulsions Containing Perfluorocarbon Support Cell Cultures

    NASA Technical Reports Server (NTRS)

    Ju, Lu-Kwang; Lee, Jaw Fang; Armiger, William B.

    1990-01-01

    Addition of emulsion containing perfluorocarbon liquid to aqueous cell-culture medium increases capacity of medium to support mammalian cells. FC-40 Fluorinert (or equivalent) - increases average density of medium so approximately equal to that of cells. Cells stay suspended in medium without mechanical stirring, which damages them. Increases density enough to prevent cells from setting, and increases viscosity of medium so oxygen bubbled through it and nutrients stirred in with less damage to delicate cells.

  16. Laser Initiation of PETN containing Nickel Inclusions

    NASA Astrophysics Data System (ADS)

    Aduev, B. P.; Zvekov, A. A.; Nurmukhametov, D. R.; Nikitin, A. P.

    2017-01-01

    The spectral and kinetic characteristics of pentaerythritol tetranitrate (PETN) containing nickel nanoparticles glow initiated by laser pulses was studied with high temporal resolution. It was shown that glow which is chemiluminescence arises as a result of chemical reaction initiation. We suggest that the glow is concerned on excited nitrogen dioxide NO2 luminescence. The reaction propagation leads to the explosion in the microsecond time range that is accompanied by thermal glow of the reaction products with temperature T=4300 K.

  17. Fort Knox, KY Containment Berm Unit Installation

    DTIC Science & Technology

    2013-02-01

    Equipment coordinat- ed for berm installation included: a fork lift, bobcat , backhoe, and dump trucks. 2.2 Containment Berm Unit Installation...600.00 Supervisor 6 $ 75.00 $ 450.00 Bobcat 1 $ 2,000.00 $ 2,000.00 Backhoe 1 $ 2,000.00 $ 2,000.00... bobcat to ensure that air pockets were removed. Following compaction, the berm was regraded to conform to the contours of the range and make it

  18. HIGH ENERGY GASEOUS PLASMA CONTAINMENT DEVICE

    DOEpatents

    Josephson, V.; Hammel, J.E.

    1959-01-13

    An apparatus is presenied for producing neutrons as a result of collisions between ions in high temperature plasmas. The invention resides in the particular arrangement of ihe device whereby ihe magneiic and electric fields are made to cross at substantially right angles in several places along a torus shaped containment vessel. A plasma of deuterium gas is generated in the vessel under the electric fields and is "trapped" in any one of the "crossed field" regions to produce a release of energy.

  19. Electrically conducting polyimide film containing tin complexes

    NASA Technical Reports Server (NTRS)

    St. Clair, Anne K. (Inventor); Ezzell, Stephen A. (Inventor); Taylor, Larry T. (Inventor); Boston, Harold G. (Inventor)

    1996-01-01

    Disclosed is a thermally-stable SnO.sub.2 -surfaced polyimide film wherein the electrical conductivity of the SnO.sub.2 surface is within the range of about 3.0.times.10.sup.-3 to about 1.times.10.sup.-2 ohms.sup.-1,. Also disclosed is a method of preparing this film from a solution containing a polyamic acid and SnCl.sub.4 (DMSO).sub.2.

  20. Plasma sprayed ceria-containing interlayer

    DOEpatents

    Schmidt, Douglas S.; Folser, George R.

    2006-01-10

    A plasma sprayed ceria-containing interlayer is provided. The interlayer has particular application in connection with a solid oxide fuel cell used within a power generation system. The fuel cell advantageously comprises an air electrode, a plasma sprayed interlayer disposed on at least a portion of the air electrode, a plasma sprayed electrolyte disposed on at least a portion of the interlayer, and a fuel electrode applied on at least a portion of the electrolyte.

  1. Synthesis of Oxides Containing Transition Metals

    DTIC Science & Technology

    1990-07-09

    prepare a number of vanadium spinels by electrolyzing melts of | ) sodium tetraborate and sodium fluoride in which were dissolved the appropriate... sodium hydroxide melts contained in alumina crucibles. Electrodes of iron, cobalt or nickel were used, depending on the desired composition of the final...product. Crystals of tungsten and molybdenum oxide "bronzes" have been grown by electrolytic reduction of tungstate or molybdate melts. Extensive

  2. New Gem-Dicyanocyclobutane-Containing Hydroxyesters

    DTIC Science & Technology

    1989-04-01

    4 In other solvents, such as acetonitrile, dichloromethane, toluene or DMSO, complex mixture of the desired cyclobutane adducts, double Diels - Alder ...Dicyanocyclobutane-Containing Hydroxyesters 12 PERSONAL AUTHOR(S) Shoji Mori, Toyoji Kakuchi, Anne Buyle Padias, and H. K. Hall, Jr. 13a. TYPE OF REPORT...6,0-dicyanoacrylate (DCA) is readily available from Knoevenagel condensation of methyl glyoxylate with malononitrile.3 CN -H20 / CH300CH-CH-O + CH2(CN

  3. Composition containing aerogel substrate loaded with tritium

    DOEpatents

    Ashley, Carol S.; Brinker, C. Jeffrey; Ellefson, Robert E.; Gill, John T.; Reed, Scott; Walko, Robert J.

    1992-01-01

    The invention provides a process for loading an aerogel substrate with tritium and the resultant compositions. According to the process, an aerogel substrate is hydrolyzed so that surface OH groups are formed. The hydrolyzed aerogel is then subjected to tritium exchange employing, for example, a tritium-containing gas, whereby tritium atoms replace H atoms of surface OH groups. OH and/or CH groups of residual alcohol present in the aerogel may also undergo tritium exchange.

  4. ) Composites Containing Nanoparticles and Larger Particles

    NASA Astrophysics Data System (ADS)

    Ghanaraja, S.; Nath, S. K.; Ray, S.

    2014-07-01

    The composites reinforced with nanoparticles result in improved strength and ductility while those containing coarser particles of micron size have limited ductility. The present study investigates the outcome of mechanical properties in a composite reinforced simultaneously with coarse and fine particles. High energy milling of manganese dioxide particles with excess of aluminum powder ensures that nanoparticles generated, either of MnO2 or alumina, are mostly separate and surrounded by aluminum particles. The milled powder when added to aluminum alloy melt, the excess aluminum particles will melt leaving behind separate oxide nanoparticles without significant agglomeration. Different amounts of milled powder mix have been stirred into molten aluminum alloy where nanoparticles of MnO2 react with melt to form alumina. The resulting slurry is cast into composites, which also contains coarser (nearly micron size) alumina particles formed by internal oxidation of the melt during processing. The microstructure of the composites shows good distribution of both the size categories of particles without significant clustering. The oxide particles are primarily γ-alumina in a matrix of aluminum-magnesium-manganese alloy containing some iron picked up from the stirrer. These composites fail during tensile test by ductile fracture due to debonding of coarser particles. The presence of nanoparticles along with coarser particles in a composite improves both strength and ductility considerably, presumably due to delay in debonding of coarser particles to higher stress because of reduced mismatch in extension caused by increased strain hardening in presence of nanoparticles in the matrix. The composites containing only coarser oxide particles show limited strength and ductility attributed to early debonding of particles at a relatively lower stress due to larger mismatch in extension between matrix and larger particles. Higher addition of powder mix beyond a limit, however

  5. Lubricating oil compositions containing hydroxy polyether polyamines

    SciTech Connect

    Campbell, C.B.

    1987-09-29

    This patent describes a hydroxy polyether amine or polyamine additive, and a lubricating oil composition containing a major amount of oil of lubricating viscosity and from about 0.01 to about 10 weight percent of the additive. The additives consist of certain lubricating oil soluble hydroxy polyoxyalkylene polyamines. The compositions may be either mono or polyamines, but polyamines are preferred. The additive compounds have molecular weights of from about 500 to 2000, and preferably from about 700 to 1200.

  6. Optical Docking Aid Containing Fresnel Lenses

    NASA Technical Reports Server (NTRS)

    Pierce, Cole J.

    1995-01-01

    Proposed device provides self-contained visual cues to aid in docking. Similar to devices used to guide pilots in landing on aircraft carriers. Positions and directions of beams of light give observer visual cues of position relative to docking target point. Optical assemblies generate directed, diverging beams of light that, together, mark approach path to docking point. Conceived for use in docking spacecraft at Space Station Freedom, device adapted to numerous industrial docking and alignment applications.

  7. Direct Containment Heating: A Solved Risk Issue

    SciTech Connect

    Passalacqua, Roberto

    2002-07-01

    In case of a High Pressure Melt Ejection (HPME) heated gas and corium may be expelled from the bottom head of a reactor vessel reaching the containment atmosphere, leading to a Direct Containment Heating (DCH). In addition, released gases might burn (e.g. hydrogen) causing a high load of the reactor containment building. Corium dispersal phenomena also strongly affect consequences of Molten Core-Concrete Interaction (MCCI) since the corium mass, which remains within the cavity, may remarkably diminish. Several computer codes are able to simulate the response of nuclear plants during hypothetical severe accidents: MELCOR, MAAP, ESCADRE and ASTEC have the capability to describe corium slump into the reactor cavity, vessel gases blow-down and possible corium entrainment. In this paper the various steps of model development, validation, plant-specific applications, etc., are described in the attempt of establishing a risk-oriented methodology with the target of solving this particular risk-issue. ENEA mature expertise in level-2 PSA analyses shows that the DCH phenomenology can be considered a solved risk issue. The applied methodology gives also hints and/or guidelines for solving similar risk issues in current PSA (level 2) analysis. (authors)

  8. Energy implications of glass-container recycling

    SciTech Connect

    Gaines, L L; Mintz, M M

    1994-03-01

    This report addresses the question of whether glass-container recycling actually saves energy. Glass-container production in 1991 was 10{sup 7} tons, with cullet making up about 30% of the input to manufacture. Two-thirds of the cullet is postconsumer waste; the remainder is in-house scrap (rejects). Most of the glass recycled is made into new containers. Total primary energy consumption includes direct process-energy use by the industry (adjusted to account for the efficiency of fuel production) plus fuel and raw-material transportation and production energies; the grand total for 1991 is estimated to be about 168 {times} 10{sup 12} Btu. The total primary energy use decreases as the percent of glass recycled rises, but the maximum energy saved is only about 13%. If distance to the landfill is kept fixed and that to the recovery facility multiplied by about eight, to 100 mi, a break-even point is reached, and recycling saves no energy. Previous work has shown that to save energy when using glass bottles, reuse is the clear choice. Recycling of glass does not save much energy or valuable raw material and does not reduce air or water pollution significantly. The most important impacts are the small reduction of waste sent to the landfill and increased production rates at glass plants.

  9. Slit Diaphragms Contain Tight Junction Proteins

    PubMed Central

    Fukasawa, Hirotaka; Bornheimer, Scott; Kudlicka, Krystyna; Farquhar, Marilyn G.

    2009-01-01

    Slit diaphragms are essential components of the glomerular filtration apparatus, as changes in these junctions are the hallmark of proteinuric diseases. Slit diaphragms, considered specialized adherens junctions, contain both unique membrane proteins (e.g., nephrin, podocin, and Neph1) and typical adherens junction proteins (e.g., P-cadherin, FAT, and catenins). Whether slit diaphragms also contain tight junction proteins is unknown. Here, immunofluorescence, immunogold labeling, and cell fractionation demonstrated that rat slit diaphragms contain the tight junction proteins JAM-A (junctional adhesion molecule A), occludin, and cingulin. We found these proteins in the same protein complexes as nephrin, podocin, CD2AP, ZO-1, and Neph1 by cosedimentation, coimmunoprecipitation, and pull-down assays. PAN nephrosis increased the protein levels of JAM-A, occludin, cingulin, and ZO-1 several-fold in glomeruli and loosened their attachment to the actin cytoskeleton. These data extend current information about the molecular composition of slit diaphragms by demonstrating the presence of tight junction proteins, although slit diaphragms lack the characteristic morphologic features of tight junctions. The contribution of these proteins to the assembly of slit diaphragms and potential signaling cascades requires further investigation. PMID:19478094

  10. Welding the AT-400A Containment Vessel

    SciTech Connect

    Brandon, E.

    1998-11-01

    Early in 1994, the Department of Energy assigned Sandia National Laboratories the responsibility for designing and providing the welding system for the girth weld for the AT-400A containment vessel. (The AT-400A container is employed for the shipment and long-term storage of the nuclear weapon pits being returned from the nation's nuclear arsenal.) Mason Hanger Corporation's Pantex Plant was chosen to be the production facility. The project was successfully completed by providing and implementing a turnkey welding system and qualified welding procedure at the Pantex Plant. The welding system was transferred to Pantex and a pilot lot of 20 AT-400A containers with W48 pits was welded in August 1997. This document is intended to bring together the AT-400A welding system and product (girth weld) requirements and the activities conducted to meet those requirements. This document alone is not a complete compilation of the welding development activities but is meant to be a summary to be used with the applicable references.

  11. Nuclear waste; Can we contain it

    SciTech Connect

    King, F.; Ikeda, B.M.; Shoesmith, D.W.

    1992-04-01

    This paper reports that the safe disposal of nuclear waste requires that the waste be isolated from the environment until radioactive decay has reduced its toxicity to innocuous levels. The disposal of such wastes deep in stable geological formations has been extensively researched since the late 1970s and is now the preferred option internationally. In all of the proposed disposal concepts, the natural barrier of the geological formation is supplemented by a series of engineered barriers each of which retards the transport of radionuclides to the environment. The geological formations being considered usually fall into one of three general categories: crystalline rock (Canada, Sweden, Switzerland, United Kingdom, United States); salt deposits (United States, Germany); and sedimentary deposits, such as clay or seabed sediments (Belgium, United Kingdom, United States), illustrates the Canadian disposal concept based on disposal in igneous rock in the Canadian Shield. The waste will consist of either used fuel bundles or immobilized reprocessed material. In the multibarrier approach the principal engineered component, and the only absolute barrier, is a metallic container enclosing the waste. The required period of containment will influence the choice of material and the thickness of the container.

  12. Physics of systems containing neutron stars

    NASA Astrophysics Data System (ADS)

    Shaham, Jacob

    1995-01-01

    This grant deals with several topics related to the dynamics of systems containing a compact object. Most of our research in 1994 dealt with systems containing Neutron Stars (NS's), but we also addressed systems containing a Black Hole (BH) or a White Dwarf (WD) in situations relevant to NS systems. Among the systems were isolated regular pulsars, Millisecond Pulsars (MSP's) that are either Single (SMP's) or in a binary (BMP's) Low Mass X-Ray Binaries (LMX's) and Cataclysmic Variables (CV's). We also dealt with one aspect of NS structure, namely NS superfluidity. A large fraction of our research dealt with irradiation-driven winds from companions. These winds turned out to be of some importance in the evolution of LMXB's and MSP's, be they SMP's or BMP's. While their role during LMXB evolution (i.e. during the accretion phase) is not yet clear, they may play an important role in turning BMP's into SMP's and also in bringing about the formation of planets around MSP's.

  13. Code manual for CONTAIN 2.0: A computer code for nuclear reactor containment analysis

    SciTech Connect

    Murata, K.K.; Williams, D.C.; Griffith, R.O.; Gido, R.G.; Tadios, E.L.; Davis, F.J.; Martinez, G.M.; Washington, K.E.; Tills, J.

    1997-12-01

    The CONTAIN 2.0 computer code is an integrated analysis tool used for predicting the physical conditions, chemical compositions, and distributions of radiological materials inside a containment building following the release of material from the primary system in a light-water reactor accident. It can also predict the source term to the environment. CONTAIN 2.0 is intended to replace the earlier CONTAIN 1.12, which was released in 1991. The purpose of this Code Manual is to provide full documentation of the features and models in CONTAIN 2.0. Besides complete descriptions of the models, this Code Manual provides a complete description of the input and output from the code. CONTAIN 2.0 is a highly flexible and modular code that can run problems that are either quite simple or highly complex. An important aspect of CONTAIN is that the interactions among thermal-hydraulic phenomena, aerosol behavior, and fission product behavior are taken into account. The code includes atmospheric models for steam/air thermodynamics, intercell flows, condensation/evaporation on structures and aerosols, aerosol behavior, and gas combustion. It also includes models for reactor cavity phenomena such as core-concrete interactions and coolant pool boiling. Heat conduction in structures, fission product decay and transport, radioactive decay heating, and the thermal-hydraulic and fission product decontamination effects of engineered safety features are also modeled. To the extent possible, the best available models for severe accident phenomena have been incorporated into CONTAIN, but it is intrinsic to the nature of accident analysis that significant uncertainty exists regarding numerous phenomena. In those cases, sensitivity studies can be performed with CONTAIN by means of user-specified input parameters. Thus, the code can be viewed as a tool designed to assist the knowledge reactor safety analyst in evaluating the consequences of specific modeling assumptions.

  14. Deconnable self-reading pocket dosimeter containment with self-contained light

    DOEpatents

    Stevens, Robyn L.; Arnold, Greg N.; McBride, Ryan G.

    1996-01-01

    A container for a self-reading pocket dosimeter includes a transparent tube for receiving the self-reading pocket dosimeter, a light source mounted at one end of the transparent tube, and an eyepiece mounted on an opposite end of the transparent tube for viewing a read-out of the self-reading pocket dosimeter. The container may further include an activation device for selectively supplying power to the light source. The container both protects the dosimeter from being contaminated and provides a light source for viewing the dosimeter.

  15. 42 CFR 84.74 - Apparatus containers; minimum requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be... for self-contained breathing apparatus shall be designed and constructed to permit easy removal of...

  16. 42 CFR 84.74 - Apparatus containers; minimum requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be... for self-contained breathing apparatus shall be designed and constructed to permit easy removal of...

  17. 42 CFR 84.74 - Apparatus containers; minimum requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be... for self-contained breathing apparatus shall be designed and constructed to permit easy removal of...

  18. 9 CFR 381.301 - Containers and closures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Containers and closures. 381.301... Containers and closures. (a) Examination and cleaning of empty containers. (1) Empty containers, closures... and free of structural defects and damage that may affect product or container integrity. Such...

  19. 40 CFR 265.173 - Management of containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Management of containers. 265.173... DISPOSAL FACILITIES Use and Management of Containers § 265.173 Management of containers. (a) A container... waste. (b) A container holding hazardous waste must not be opened, handled, or stored in a manner...

  20. 40 CFR 264.173 - Management of containers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Management of containers. 264.173... Use and Management of Containers § 264.173 Management of containers. (a) A container holding hazardous... container holding hazardous waste must not be opened, handled, or stored in a manner which may rupture...

  1. 19 CFR 10.7 - Substantial containers or holders.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Substantial containers or holders. 10.7 Section 10... Exported and Returned § 10.7 Substantial containers or holders. (a) Substantial containers or holders... domestic products exported and returned. When such containers or holders are imported not containing...

  2. 46 CFR 108.635 - Self-contained breathing apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.635 Self-contained breathing apparatus. Each locker or space containing self-contained breathing apparatus must be marked: “SELF CONTAINED... 46 Shipping 4 2010-10-01 2010-10-01 false Self-contained breathing apparatus. 108.635 Section...

  3. 46 CFR 108.635 - Self-contained breathing apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.635 Self-contained breathing apparatus. Each locker or space containing self-contained breathing apparatus must be marked: “SELF CONTAINED... 46 Shipping 4 2011-10-01 2011-10-01 false Self-contained breathing apparatus. 108.635 Section...

  4. 42 CFR 84.74 - Apparatus containers; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will...

  5. 42 CFR 84.74 - Apparatus containers; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will...

  6. 7 CFR 1434.8 - Containers and drums.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... REGULATIONS FOR HONEY § 1434.8 Containers and drums. (a)(1) To be eligible for assistance under this part, honey must be packed in: (i) CCC-approved, 5-gallon plastic containers; (ii) 5-gallon metal containers... Intermediate Bulk Containers (IBC's). (2) Honey stored in plastic containers must be determined safe and...

  7. 7 CFR 1434.8 - Containers and drums.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... REGULATIONS FOR HONEY § 1434.8 Containers and drums. (a)(1) To be eligible for assistance under this part, honey must be packed in: (i) CCC-approved, 5-gallon plastic containers; (ii) 5-gallon metal containers... Intermediate Bulk Containers (IBC's). (2) Honey stored in plastic containers must be determined safe and...

  8. Lithium insertion in carbonaceous materials containing silicon

    NASA Astrophysics Data System (ADS)

    Wilson, Alfred Macdonald

    Three different series of silicon-containing carbonaceous materials were synthesized for use as anodes in lithium ion cells. Disordered (or pregraphitic) carbons containing nanodispersed silicon were prepared by the chemical vapour deposition (CVD) of various chlorosilanes (SiClsb4, (CHsb3)sb2Clsb2Si, and (CHsb3)sb3ClSi) with benzene in two different apparatuses. Silicon oxycarbide glasses were synthesized by the pyrolysis of over 50 silicon-containing polymers at various temperatures, although the principal materials in the study were prepared at 1000sp°C. Finally, materials which we believe to be similar to disordered carbons containing nanodispersed silicon were prepared by the pyrolysis of various blends of pitches with polysilanes. Powder X-ray diffraction was used to learn about the structure of all the materials made. Thermal gravimetric analysis was used to determine the silicon content in the CVD materials and, when coupled to a residual gas analyzer, to study the decomposition process of the polymers. Near edge X-ray absorption spectroscopy measurements of the silicon L- and K-edges of CVD materials and the silicon K-edges of silicon oxycarbides were used to learn about local chemical environments of the silicon atoms. Lithium metal electrochemical test cells of the silicon-containing CVD materials showed larger capacities (up to 500 mAh/g) than pure carbons prepared in the same way (˜300 mAh/g). The additional capacity was observed to be centered near 0.4 V on charge, the average voltage observed for the removal of lithium from a silicon-lithium alloy. Chemical analysis showed that the stoichiometries of materials made by polymer pyrolysis were distributed over a well-defined region in the Si-O-C Gibbs phase diagram. An interesting series of materials is found near the line in the Si-O-C Gibbs triangle connecting carbon to SiOsb{1.3}. Lithium metal electrochemical test cells made using all the silicon oxycarbides synthesized showed that a stoichiometry

  9. Performance of particulate containment at nanotechnology workplaces

    NASA Astrophysics Data System (ADS)

    Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

    2015-11-01

    The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These control assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37 % reduction on the particle concentration in the worker's breathing zone, and produce a 42 % lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15-20 % higher ultrafine (<500 nm) particle concentrations at the source and at the worker's breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored.

  10. Manganese containing layer for magnetic recording media

    DOEpatents

    Lambeth, David N.; Lee, Li-Lien; Laughlin, David E.

    1999-01-01

    The present invention provides for a magnetic recording media incorporating Mn-containing layers between a substrate and a magnetic layer to provide media having increased coercivity and lower noise. The Mn-containing layer can be incorporated in a rotating, translating or stationary recording media to operate in conjunction with magnetic transducing heads for recording and reading of magnetic data, as well as other applications. The magnetic recording medium of the invention preferably includes a Co or Co alloy film magnetic layer, and Mn-containing layer, preferably comprised of VMn, TiMn, MnZn, CrMnMo, CrMnW, CrMnV, and CrMnTi, and most preferably a CrMn alloy, disposed between the substrate and the magnetic layer to promote an epitaxial crystalline structure in the magnetic layer. The medium can further include seed layers, preferably polycrystalline MgO for longitudinal media, underlayers, and intermediate layers. Underlayers and intermediate layers are comprised of materials having either an A2 structure or a B2-ordered crystalline structure disposed between the seed layer and the magnetic layer. Materials having an A2 structure are preferably Cr or Cr alloys, such as CrV, CrMo, CrW and CrTi. Materials having a B2-ordered structure having a lattice constant that is substantially comparable to that of Cr, such as those preferably selected from the group consisting of NiAl, AILCo, FeAl, FeTi, CoFe, CoTi, CoHf, CoZr, NiTi, CuBe, CuZn, A-LMn, AlRe, AgMg, and Al.sub.2 FeMn.sub.2, and is most preferably FeAl or NiAl.

  11. Engineered containment and control systems : nurturing nature.

    SciTech Connect

    MacDonell, M.; Clarke, J.; Smith, E.; Dunn, J.; Waugh, J.; Environmental Assessment; Vanderbilt Univ.; ORNL; Kleinfelder; U.S. Department of Energy Grand Junction Office

    2004-06-01

    The development of engineered containment and control systems for contaminated sites must consider the environmental setting of each site. The behaviors of both contaminated materials and engineered systems are affected by environmental conditions that will continue to evolve over time as a result of such natural processes as climate change, ecological succession, pedogenesis, and landform changes. Understanding these processes is crucial to designing, implementing, and maintaining effective systems for sustained health and environmental protection. Traditional engineered systems such as landfill liners and caps are designed to resist natural processes rather than working with them. These systems cannot be expected to provide long-term isolation without continued maintenance. In some cases, full-scale replacement and remediation may be required within 50 years, at an effort and cost much higher than for the original cleanup. Approaches are being developed to define smarter containment and control systems for stewardship sites, considering lessons learned from implementing prescriptive waste disposal regulations enacted since the 1970s. These approaches more effectively involve integrating natural and engineered systems; enhancing sensors and predictive tools for evaluating performance; and incorporating information on failure events, including precursors and consequences, into system design and maintenance. An important feature is using natural analogs to predict environmental conditions and system responses over the long term, to accommodate environmental change in the design process, and, as possible, to engineer containment systems that mimic favorable natural systems. The key emphasis is harmony with the environment, so systems will work with and rely on natural processes rather than resisting them. Implementing these new integrated systems will reduce current requirements for active management, which are resource-intensive and expensive.

  12. A novel orellanine containing mushroom Cortinarius armillatus.

    PubMed

    Shao, Dahai; Tang, Shusheng; Healy, Rosanne A; Imerman, Paula M; Schrunk, Dwayne E; Rumbeiha, Wilson K

    2016-05-01

    Orellanine (3,3',4,4'-tetrahydroxy-2,2'-bipyridine-1,1'-dioxide) is a tetrahydroxylated di-N-oxidized bipyridine compound. The toxin, present in certain species of Cortinarius mushrooms, is structurally similar to herbicides Paraquat and Diquat. Cortinarius orellanus and Cortinarius rubellus are the major orellanine-containing mushrooms. Cortinarius mushrooms are widely reported in Europe where they have caused human poisoning and deaths through accidental ingestion of the poisonous species mistaken for the edible ones. In North America, Cortinarius orellanosus mushroom poisoning was recently reported to cause renal failure in a Michigan patient. Cortinarius mushroom poisoning is characterized by delayed acute renal failure, with some cases progressing to end-stage kidney disease. There is debate whether other Cortinarius mushroom contain orellanine or not, especially in North America. Currently, there are no veterinary diagnostic laboratories in North America with established test methods for detection and quantitation of orellanine. We have developed two diagnostic test methods based on HPLC and LC-MSMS for identification and quantitation of orellanine in mushrooms. Using these methods, we have identified Cortinarius armillatus as a novel orellanine-containing mushroom in North America. The mean toxin concentration of 145 ug/g was <1% of that of the more toxic C. rubellus. The HPLC method can detect orellanine at 17 μg g(-1) while the LC-MSMS method is almost 2000 times more sensitive and can detect orellanine at 30 ng g(-1). Both tests are quantitative, selective and are now available for veterinary diagnostic applications.

  13. Power Morcellation Using a Contained Bag System

    PubMed Central

    Cholkeri-Singh, Aarathi; Sasaki, Kirsten; Miller, Charles E.

    2017-01-01

    Background and Objectives: The well-known advantages of minimally invasive surgery make the approach well suited for hysterectomy and other gynecological procedures. The removal of specimens excised during surgery has been a challenge that has been answered by the use of power morcellation. With this study we sought to assess the feasibility of power morcellation within a specimen bag. Methods: This was a retrospective cohort study including patients from a private practice in suburban Chicago, Illinois, who underwent contained electromechanical power morcellation during a laparoscopic or robot-assisted hysterectomy or myomectomy from May 2014 through December 2015. Contained power morcellation was performed with the Espiner EcoSac 230 (Espiner Medical Ltd., North Somerset, United Kingdom) specimen bag. Descriptive statistics were performed for both categorical and continuous data. Results: Of the 187 procedures performed, 73.8% were myomectomies, and 26.2% were hysterectomies. The patients' mean age was 40 (range, 25–54) years and mean body mass index was 28.7 (range, 17.3–57.6). The average specimen weight was 300 g, with the largest weighing 2134 g. Estimated blood loss averaged 98.4 mL. The postoperative admission rate was 12.3%, most of which were due to nausea and urinary retention. Seventeen patients (9.1%) had postoperative complications, most of which were minor, and 4 (2.1%) were readmitted. There were no bag failures or complications that were due to the use of the specimen bag or to power morcellation. Conclusions: Performing electromechanical power morcellation within the Espiner EcoSac 230 specimen bag was successfully performed in 187 patients with no bag-related complications. This method of contained power morcellation is feasible, reliable, and reproducible, even for a large specimen. PMID:28352146

  14. Performance of Particulate Containment at Nanotechnology Workplaces

    PubMed Central

    Lo, Li-Ming; Tsai, Candace S.-J.; Dunn, Kevin H.; Hammond, Duane; Marlow, David; Topmiller, Jennifer; Ellenbecker, Michael

    2015-01-01

    The evaluation of engineering controls for the production or use of carbon nanotubes (CNTs) was investigated at two facilities. These controls assessments are necessary to evaluate the current status of control performance and to develop proper control strategies for these workplaces. The control systems evaluated in these studies included ventilated enclosures, exterior hoods, and exhaust filtration systems. Activity-based monitoring with direct-reading instruments and filter sampling for microscopy analysis were used to evaluate the effectiveness of control measures at study sites. Our study results showed that weighing CNTs inside the biological safety cabinet can have a 37% reduction on the particle concentration in the worker’s breathing zone, and produce a 42% lower area concentration outside the enclosure. The ventilated enclosures used to reduce fugitive emissions from the production furnaces exhibited good containment characteristics when closed, but they failed to contain emissions effectively when opened during product removal/harvesting. The exhaust filtration systems employed for exhausting these ventilated enclosures did not provide promised collection efficiencies for removing engineered nanomaterials from furnace exhaust. The exterior hoods were found to be a challenge for controlling emissions from machining nanocomposites: the downdraft hood effectively contained and removed particles released from the manual cutting process, but using the canopy hood for powered cutting of nanocomposites created 15%–20% higher ultrafine (<500 nm) particle concentrations at the source and at the worker’s breathing zone. The microscopy analysis showed that CNTs can only be found at production sources but not at the worker breathing zones during the tasks monitored. PMID:26705393

  15. Uranyl peroxide closed clusters containing topological squares

    SciTech Connect

    Unruh, Daniel K.; Burtner, Alicia; Pressprich, Laura; Sigmon, Ginger E.; Burns, Peter C

    2010-01-01

    Four self-assembling clusters of uranyl peroxide polyhedra have been formed in alkaline aqueous solutions and structurally characterized. These clusters consist of 28, 30, 36 and 44 uranyl polyhedra and exhibit complex new topologies. Each has a structure that contains topological squares, pentagons and hexagons. Analysis of possible topologies within boundary constraints indicates a tendency for adoption of higher symmetry topologies in these cases. Small angle X-ray scattering data demonstrated that crystals of one of these clusters can be dissolved in ultrapure water and that the clusters remain intact for at least several days.

  16. Cysteine-containing peptides having antioxidant properties

    DOEpatents

    Bielicki, John K.

    2008-10-21

    Cysteine containing amphipathic alpha helices of the exchangeable apolipoproteins, as exemplified by apolipoprotein (apo) A-I.sub.Milano (R173C) and apoA-I.sub.Paris, (R151C) were found to exhibit potent antioxidant activity on phospholipid surfaces. The addition of a free thiol, at the hydrophobic/hydrophilic interface of an amphipathic alpha helix of synthetic peptides that mimic HDL-related proteins, imparts a unique antioxidant activity to these peptides which inhibits lipid peroxidation and protects phospholipids from water-soluble free radical initiators. These peptides can be used as therapeutic agents to combat cardiovascular disease, ischemia, bone disease and other inflammatory related diseases.

  17. Cysteine-containing peptides having antioxidant properties

    DOEpatents

    Bielicki, John K.

    2009-10-13

    Cysteine containing amphipathic alpha helices of the exchangeable apolipoproteins, as exemplified by apolipoprotein (apo) A-I.sub.Milano (R173C) and apoA-I.sub.Paris, (R151C) were found to exhibit potent antioxidant activity on phospholipid surfaces. The addition of a free thiol, at the hydrophobic/hydrophilic interface of an amphipathic alpha helix of synthetic peptides that mimic HDL-related proteins, imparts a unique antioxidant activity to these peptides which inhibits lipid peroxidation and protects phospholipids from water-soluble free radical initiators. These peptides can be used as therapeutic agents to combat cardiovascular disease, ischemia, bone disease and other inflammatory related diseases.

  18. Pigs from iron containing dusts and sludges

    SciTech Connect

    Moore, C.M.

    1995-12-31

    DK Recycling und Roheisen GmbH converts 380,000 annual tonnes of iron containing waste materials into pig iron. Zinc is the main reason that these materials are classified as waste. The materials are processed in the conventional way by making sinter which is then smelted in a blast furnace to foundry grade pig iron. The trick lies not in the unit operations which are quite standard but rather in the modifications made to the plant and operating procedures to cope with the much higher levels of tramp elements.

  19. Reusable crucible for containing corrosive liquids

    DOEpatents

    de Pruneda, Jean A. H.

    1995-01-01

    A reusable, non-wetting, corrosion-resistant material suitable for containment of corrosive liquids is formed of a tantalum or tantalum alloy substrate that is permeated with carbon atoms. The substrate is carburized to form surface layers of TaC and Ta.sub.2 C, and then is heated at high temperature under vacuum until the carbon atoms in the carbide layers diffuse throughout the substrate to form a solid solution of carbon atoms randomly interspersed in the tantalum or tantalum alloy lattice.

  20. Reliability evaluation of prestressed concrete containment structures

    SciTech Connect

    Pires, J.; Hwang, H.; Reich, M.

    1985-01-01

    The probabilistic safety evaluation of a realistic unbonded prestressed concrete containment building subjected to combinations of static and dynamic loads is presented. Loads considered include dead load, prestressing, accidental internal pressure, tornado and earthquake loads. Pertinent load parameters are the occurrence rate, duration and intensity. These parameters are treated as random variables for most of the loads. Limit state probabilities conditional on a specific load combination are calculated using the analytical procedure developed at BNL, which makes use of the finite element method and random vibration theory. Lifetime limit state probabilities are calculated using a load coincidence formulation. 3 refs., 2 figs., 2 tabs.