Science.gov

Sample records for 5d transition-metal oxide

  1. Experimental bandstructure of the 5 d transition metal oxide IrO2

    NASA Astrophysics Data System (ADS)

    Kawasaki, Jason; Nie, Yuefeng; Uchida, Masaki; Schlom, Darrell; Shen, Kyle

    2015-03-01

    In the 5 d iridium oxides the close energy scales of spin-orbit coupling and electron-electron correlations lead to emergent quantum phenomena. Much research has focused on the ternary iridium oxides, e.g. the Ruddlesden-Poppers An + 1BnO3 n + 1 , which exhibit behavior from metal to antiferromagnetic insulator ground states, share common features with the cuprates, and may host a number of topological phases. The binary rutile IrO2 is another important 5 d oxide, which has technological importance for spintronics due to its large spin Hall effect and also applications in catalysis. IrO2 is expected to share similar physics as its perovskite-based cousins; however, due to bond-length distortions of the IrO6 octahedra in the rutile structure, the extent of similarities remains an open question. Here we use angle-resolved photoemission spectroscopy to perform momentum-resolved measurements of the electronic structure of IrO2 . IrO2 thin films were grown by molecular beam epitaxy on TiO2 (110) substrates using an Ir e-beam source and distilled ozone. Films were subsequently transferred through ultrahigh vacuum to a connected ARPES system. Combined with first-principles calculations we explore the interplay of spin-orbit coupling and correlations in IrO2 .

  2. New Quasi Low-Dimensional 4d and 5d Transition Metal Oxides with Correlated Electronic Properties - Synthesis and Characterizations

    DTIC Science & Technology

    2016-02-17

    Mn2MnReO6: synthesis and magnetic structure determination of a new transition- metal -only double perovskite canted antiferromagnet, Chemical...Greenblatt, Angewandt. Chem., revised resubmitted, 2-8-2016. 19. Mn2MnReO6: synthesis and magnetic structure determination of a new transition- metal ...typically combine to form non-polar structures , and the number of known polar, especially magnetoelectric materials, is still extremely few.[2] Therefore

  3. High-pressure Synthesis and Magnetic Properties of 4d and 5d Transition-metal Oxides

    NASA Astrophysics Data System (ADS)

    Cheng, J.-G.

    2011-03-01

    The pressure effect on synthesis of oxides with perovskite A BO3 and perovskite-related structures has become more clear in recent years. The geometric tolerance factor t ≡ (A-O)/ √ 2 (B-O) measures the structural stability. High-pressure synthesis enlarges the range of the t factor where the perovskite structure can be stabilized. For the A BO3 compounds with t 1, high pressure reduces the t factor since the A-O bond is more compressible than the B-O bond. Therefore, perovskite would be the high-pressure phase for ambient-pressure polytype structures. However, the bonding compressibility argument is no longer valid for the ABO3 with t < 1 . Adt / dP 0 isnormallyobtainedfortlessthanbutverycloseto 1 , i . e . theorthorhombicdistortionbecomessmallerunderpressure . Forthosehighlydistortedperovskiteswithtfactorfarlessthanone , pressureenlargesfurthertheorthorhombicdistortionandeventuallyleadstoaphasetransitiontothepost - perovskitephase . Asfor < formula > < ? TeX , high pressure prefers the small-volume perovskite phase relative to a competitive pyrochlore phase . Understanding the pressure effect and the new capacity provided by a Walker-type multianvil press enabled us to expand the perovskite family and to obtain new phases of 4d and 5d oxides. Studies of these new 4d and 5d oxides allow us not only to address long-standing problems, but also to explore exotic physical properties. (1) In the perovskite (A= alkaline earth), we have completed the phase diagram from A= Ca to Sr and to Ba and also accounted for the A-cation size-variance effect. A systematic study of the Curie temperature and the critical behavior as a function of the average A-site size and the size variance as well as external high pressures reveals explicitly the crucial role of the lattice strain on the ferromagnetism. The mean-field critical behaviour near found previously in is not typical of these perovskite ruthenates. is completely suppressed by Pb doping in not due to the steric effect

  4. Effect of longer-range lattice anisotropy on the electronic structure and magnetism of spin-orbit-coupled 5 d transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Bogdanov, Nikolay; Katukuri, Vamshi; Romhányi, Judit; Yushankhai, Viktor; Kataev, Vladislav; Büchner, Berndt; van den Brink, Jeroen; Hozoi, Liviu

    Our detailed quantum chemistry calculations provide magnetic g factors and exchange interactions for the quasi two-dimensional iridates Sr2IrO and Ba2IrO4. While canonical ligand-field considerations predict g| |-factors < 2 for the positive tetragonal distortions present in Sr2IrO4, we find g| | > 2 . This implies that the d levels in Sr2IrO4 are inverted with respect to the ordering deduced from the local ligand distortions, whereas we find them in Ba2IrO4 to be instead normally ordered. Electron spin resonance measurements confirm the level inversion in Sr2IrO4. This d-level switching is driven by the specific ionic charge distribution within adjacent IrO2 and SrO layers. Since polar discontinuities and the associated complications do not arise for such layers, our results highlight the tetravalent d-metal 214 oxides as ideal platforms to explore d-level reconstruction and engineering in the context of oxide heterostructures. Present address: Electronic structure theory, MPI-FKF, Stuttgart.

  5. Host Materials for 4d(N) and 5d(N) Transition-Metal Ions

    DTIC Science & Technology

    1990-12-01

    ELL COP.Y 0 HDL- TM -90-20 0 to December 1990 N I Host Materials for 4dN and 5dN Transition-Metal Ions by Clyde A. Morrison DTIC ELECTE SFEB13 1991u...ORGANIZATION NAME(S) AND ADDRESS(ES) B. PERFORMING ORGANIZATION REPORT NUMBER Harry Diamond Laboratories HDL- TM -90-20 2800 Powder Mill Road Adeiphi...October 1988), Analysis of the optical spectra of triply ionized transition-metal ions in yttrium aluminum garnet ( YAG ), Harry Diamond Laboratories

  6. First principles calculations of mechanical properties of cubic 5d transition metal monocarbides

    NASA Astrophysics Data System (ADS)

    Yang, Jun; Gao, Faming

    2012-09-01

    The electronic and elastic properties of cubic 5d transition metal monocarbides in rocksalt, cesium chloride, and zinc blende structures have been studied by first principles calculations. The calculations show that the incompressibility for ReC in cesium chloride structure is even higher than that of diamond under pressure (above 89 GPa). The transformation pressure from zinc blende structure to rocksalt structure takes place at about 47 GPa for PtC. HfC-NaCl, ReC-CsCl, and HfC-ZnS have the smallest metallicity, leading to higher hardness. A valence electron number of 8/cell may be a stable valence shell configuration for 5d transition metal monocarbides in rocksalt and zinc blende structures.

  7. Mesoporous Transition Metal Oxides for Supercapacitors

    PubMed Central

    Wang, Yan; Guo, Jin; Wang, Tingfeng; Shao, Junfeng; Wang, Dong; Yang, Ying-Wei

    2015-01-01

    Recently, transition metal oxides, such as ruthenium oxide (RuO2), manganese dioxide (MnO2), nickel oxides (NiO) and cobalt oxide (Co3O4), have been widely investigated as electrode materials for pseudo-capacitors. In particular, these metal oxides with mesoporous structures have become very hot nanomaterials in the field of supercapacitors owing to their large specific surface areas and suitable pore size distributions. The high specific capacities of these mesoporous metal oxides are resulted from the effective contacts between electrode materials and electrolytes as well as fast transportation of ions and electrons in the bulk of electrode and at the interface of electrode and electrolyte. During the past decade, many achievements on mesoporous transition metal oxides have been made. In this mini-review, we select several typical nanomaterials, such as RuO2, MnO2, NiO, Co3O4 and nickel cobaltite (NiCo2O4), and briefly summarize the recent research progress of these mesoporous transition metal oxides-based electrodes in the field of supercapacitors. PMID:28347088

  8. Nanostructured transition metal oxides useful for water oxidation catalysis

    DOEpatents

    Frei, Heinz M; Jiao, Feng

    2013-12-24

    The present invention provides for a composition comprising a nanostructured transition metal oxide capable of oxidizing two H.sub.2O molecules to obtain four protons. In some embodiments of the invention, the composition further comprises a porous matrix wherein the nanocluster of the transition metal oxide is embedded on and/or in the porous matrix.

  9. Orbital physics in transition-metal oxides

    PubMed

    Tokura; Nagaosa

    2000-04-21

    An electron in a solid, that is, bound to or nearly localized on the specific atomic site, has three attributes: charge, spin, and orbital. The orbital represents the shape of the electron cloud in solid. In transition-metal oxides with anisotropic-shaped d-orbital electrons, the Coulomb interaction between the electrons (strong electron correlation effect) is of importance for understanding their metal-insulator transitions and properties such as high-temperature superconductivity and colossal magnetoresistance. The orbital degree of freedom occasionally plays an important role in these phenomena, and its correlation and/or order-disorder transition causes a variety of phenomena through strong coupling with charge, spin, and lattice dynamics. An overview is given here on this "orbital physics," which will be a key concept for the science and technology of correlated electrons.

  10. First Principles Study of HCN Adsorption on Graphene Doped with 5d Transition Metal

    NASA Astrophysics Data System (ADS)

    Dong, Hai-Kuan; Wang, Yong-Ping; Shi, Li Bin

    2016-11-01

    Hydrogen cyanide (HCN) adsorption on graphene doped with 5d transition metal (TM) is investigated by the first principles based on density functional theory. It is observed that Hg atom cannot be doped into graphene due to saturated valence electron configurations of 5d106s2. Three kinds of HCN adsorption configurations are investigated, in which H, C and N in HCN are close to the adsorption site, respectively. The most stable adsorption configuration is obtained by total energy optimization. HCN adsorption can be studied by adsorption energy and electron density difference. HCN can only be physisorbed on Ir, Pt and Au-doped graphenes, while chemisorption is observed for Lu, Hf, Ta, W, Re and Os-doped graphenes. The band structure is calculated by B3LYP and Generalized gradient approximation (GGA) functionals. It is observed from B3LYP method that the conductivity of Lu, Hf, Re and Os-doped graphenes does not obviously change before and after HCN adsorption. Ta and W-doped graphenes change from semiconductor to metal after adsorption of HCN molecule. The results indicate that Ta and W-doped graphenes may be a promising sensor for detecting HCN. This study provides a useful basis for understanding of a wide variety of physical properties on graphene.

  11. The Intriguing Properties of Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Hoch, Michael J. R.

    2007-05-01

    Since the discovery of high-temperature superconductivity in the cuprates twenty years ago, there has been a resurgence of interest in the transition metal oxides. Work on these systems has been driven both by the fascinating properties that these materials exhibit and by potential applications in technology. A brief general review of the perovskites and their electronic structures is given. This is followed by a discussion of the properties of magnetic oxide systems ABO3 (A=La; B=Mn or Co), specifically focusing on the doped manganites (e.g. La1-x SrxMnO3) and cobaltites (e.g. La1-xSrxCoO3), in which mixed valence states and double exchange are important. Competing electron localizing and delocalizing effects result in rich phase diagrams and interesting transport properties with large magnetoresistance effects. Nanoscale phase separation has been found for a range of x values using a variety of techniques, such as nuclear magnetic resonance and neutron scattering. These discoveries have provided an increased understanding of the role of the interacting magnetic, electronic and lattice structures in these systems.

  12. Correlation between the spin Hall angle and the structural phases of early 5d transition metals

    SciTech Connect

    Liu, Jun; Ohkubo, Tadakatsu; Mitani, Seiji; Hono, Kazuhiro; Hayashi, Masamitsu

    2015-12-07

    We have studied the relationship between the structure and the spin Hall angle of the early 5d transition metals in X/CoFeB/MgO (X = Hf, Ta, W, and Re) heterostructures. Spin Hall magnetoresistance (SMR) is used to characterize the spin Hall angle of the heavy metals. Transmission electron microscopy images show that all underlayers are amorphous-like when their thicknesses are small, however, crystalline phases emerge as the thickness is increased for certain elements. We find that the heavy metal layer thickness dependence of the SMR reflects these changes in structure. The largest spin Hall angle |θ{sub SH}| of Hf, Ta, W, and Re (∼0.11, 0.10, 0.23, and 0.07, respectively) is found when the dominant phase is amorphous-like. We find that the amorphous-like phase not only possesses large resistivity but also exhibits sizeable spin Hall conductivity, which both contribute to the emergence of the large spin Hall angle.

  13. Electrolytic separation of crystals of transition-metal oxides

    NASA Technical Reports Server (NTRS)

    Arnott, R. J.; Feretti, A.; Kunnamann, W.

    1969-01-01

    Versatile flux system grows large, well-formed, stoichiometric single crystals of mixed oxides of the transition-metal elements. These crystals have important uses in the microwave field, and applications as lasers and masers in communications.

  14. Spin Hall effect in 5d Au: W transition metal alloys (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Laczkowski, Piotr; Rojas-Sánchez, Juan Carlos; Savero-Torres, Williams; Reyren, Nicolas; Deranlot, Cyrile; George, Jean-Marie; Jaffrès, Henri; Fu, Yu; Marty, Alain; Warin, Patrick; Attané, Jean-Philippe; Vila, Laurent; Fert, Albert

    2016-10-01

    The spin Hall effect (SHE) [1] allows for a reciprocal conversion between charge and spin currents using the spin orbit coupling which can be at the core of several promising spintronics devices. The spin orbit interaction is used to produce a transverse flow of spin or charge in response to a longitudinal excitation, these are the direct or inverse SHE. The spin Hall angle (SHA), the ratio of longitudinal and transverse electronic conductivities, is the characterising parameter of this conversion. So far, large SHA have been reported in transition metals like Pt, Pd, W, Beta-Ta and in a few alloys with large spin orbit coupling impurities: CuIr, CuBi or CuPb [2]. In this presentation we will report on our study of the SHA in Au based alloys [3] which exhibits a non-monotonic relation with the impurity concentration. In the regime of diluted alloys this behaviour suggests the dominent side-jump contribution to the spin Hall resistivity, thus allowing precise tuning of the SHA as a function of impurities concentration. We will present our analyses results by using the Lateral Spin Valves, with newly introduced spin-absorption model adapted to the case of the strong spin-orbit interactions and by using complementary Ferromagnetic-Resonance/Spin-Pumping technique thus demonstrating very large SHA of the order of 15 % or even larger. [1] J.E. Hirsch, PRL 83, 1834 (1999). [2] Y. Niimi et al., PRL 106, 126601 (2011), PRL 109, 156602 (2012), PRB 89, 054401 (2014). [3] P. Laczkowski et al., APL 104, 142403 (2014) [4] E. Saitoh, et al., APL 88, 182509 (2006).

  15. Synthesis of Oxides Containing Transition Metals

    DTIC Science & Technology

    1990-07-09

    prepare a number of vanadium spinels by electrolyzing melts of | ) sodium tetraborate and sodium fluoride in which were dissolved the appropriate... sodium hydroxide melts contained in alumina crucibles. Electrodes of iron, cobalt or nickel were used, depending on the desired composition of the final...product. Crystals of tungsten and molybdenum oxide "bronzes" have been grown by electrolytic reduction of tungstate or molybdate melts. Extensive

  16. Simple transition metal oxides (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Schuller, Ivan K.; Basaran, Ali C.; de la Venta, Jose; Ramirez, Juan Gabriel; Saerbeck, Thomas; Valmianski, Ilya; Wang, Siming

    2016-10-01

    Hybrid materials allow the engineering of new material properties by creative uses of proximity effects. When two dissimilar materials are in close physical proximity the properties of each one may be radically modified or occasionally a completely new material emerges. In the area of magnetism, controlling the magnetic properties of ferromagnetic thin films without magnetic fields is an on- going challenge with multiple technological implications for low- energy consumption memory and logic devices. Interesting possibilities include ferromagnets in proximity to dissimilar materials such as antiferromagnets or oxides that undergo metal-insulator transitions. The proximity of ferromagnets to antiferromagnets has given rise to the extensively studied Exchange Bias[1]. Our recent investigations in this field have addressed crucial issues regarding the importance of the antiferromagnetic [2-3] and ferromagnetic [4] bulk for the Exchange Bias and the unusual short time dynamics [5]. In a series of recent studies, we have investigated the magnetic properties of different hybrids of ferromagnets (Ni, Co and Fe) and oxides, which undergo metal-insulator and structural phase transitions. Both the static as well as dynamical properties of the ferromagnets are drastically affected. Static properties such as the coercivity, anisotropy and magnetization [6-8] and dynamical properties such as the microwave response are clearly modified by the proximity effect and give raise to interesting perhaps useful properties. Work supported by US-AFOSR and US-DOE

  17. Impurity diffusion in transition-metal oxides

    SciTech Connect

    Peterson, N.L.

    1982-06-01

    Intrinsic tracer impurity diffusion measurements in ceramic oxides have been primarily confined to CoO, NiO, and Fe/sub 3/O/sub 4/. Tracer impurity diffusion in these materials and TiO/sub 2/, together with measurements of the effect of impurities on tracer diffusion (Co in NiO and Cr in CoO), are reviewed and discussed in terms of impurity-defect interactions and mechanisms of diffusion. Divalent impurities in divalent solvents seem to have a weak interaction with vacancies whereas trivalent impurities in divalent solvents strongly influence the vacancy concentrations and significantly reduce solvent jump frequencies near a trivalent impurity. Impurities with small ionic radii diffuse more slowly with a larger activation energy than impurities with larger ionic radii for all systems considered in this review. Cobalt ions (a moderate size impurity) diffuse rapidly along the open channels parallel to the c-axis in TiO/sub 2/ whereas chromium ions (a smaller-sized impurity) do not. 60 references, 11 figures.

  18. Nearly free electrons in a 5d delafossite oxide metal

    PubMed Central

    Kushwaha, Pallavi; Sunko, Veronika; Moll, Philip J. W.; Bawden, Lewis; Riley, Jonathon M.; Nandi, Nabhanila; Rosner, Helge; Schmidt, Marcus P.; Arnold, Frank; Hassinger, Elena; Kim, Timur K.; Hoesch, Moritz; Mackenzie, Andrew P.; King, Phil D. C.

    2015-01-01

    Understanding the role of electron correlations in strong spin-orbit transition-metal oxides is key to the realization of numerous exotic phases including spin-orbit–assisted Mott insulators, correlated topological solids, and prospective new high-temperature superconductors. To date, most attention has been focused on the 5d iridium-based oxides. We instead consider the Pt-based delafossite oxide PtCoO2. Our transport measurements, performed on single-crystal samples etched to well-defined geometries using focused ion beam techniques, yield a room temperature resistivity of only 2.1 microhm·cm (μΩ-cm), establishing PtCoO2 as the most conductive oxide known. From angle-resolved photoemission and density functional theory, we show that the underlying Fermi surface is a single cylinder of nearly hexagonal cross-section, with very weak dispersion along kz. Despite being predominantly composed of d-orbital character, the conduction band is remarkably steep, with an average effective mass of only 1.14me. Moreover, the sharp spectral features observed in photoemission remain well defined with little additional broadening for more than 500 meV below EF, pointing to suppressed electron-electron scattering. Together, our findings establish PtCoO2 as a model nearly-free–electron system in a 5d delafossite transition-metal oxide. PMID:26601308

  19. Relationships between the surface electronic and chemical properties of doped 4d and 5d late transition metal dioxides

    SciTech Connect

    Xu, Zhongnan; Kitchin, John R.

    2015-03-14

    Density functional theory calculations were performed to elucidate the underlying physics describing the adsorption energies on doped late transition metal dioxide rutiles. Adsorption energies of atomic oxygen on doped rutiles M{sup D}-M{sup H}O{sub 2}, where transition metal M{sup D} is doped into M{sup H}O{sub 2}, were expressed in terms of a contribution from adsorption on the pure oxide of the dopant M{sup D} and perturbations to this adsorption energy caused by changing its neighboring metal cations and lattice parameters to that of the host oxide M{sup H}O{sub 2}, which we call the ligand and strain effects, respectively. Our analysis of atom projected density of states revealed that the t{sub 2g}-band center had the strongest correlation with adsorption energies. We show that charge transfer mediated shifts to the t{sub 2g}-band center describe the ligand effect, and the radii of the atomic orbitals of metal cations can predict the magnitude and direction of this charge transfer. Strain produces systematic shifts to all features of the atom projected density of states, but correlations between the strain effect and the electronic structure were dependent on the chemical identity of the metal cation. The slope of these correlations can be related to the idealized d-band filling. This work elucidates the underlying physics describing adsorption on doped late transition metal oxides and establishes a foundation for models that use known chemical properties for the prediction of reactivity.

  20. Optical properties of transition metal oxide quantum wells

    SciTech Connect

    Lin, Chungwei; Posadas, Agham; Choi, Miri; Demkov, Alexander A.

    2015-01-21

    Fabrication of a quantum well, a structure that confines the electron motion along one or more spatial directions, is a powerful method of controlling the electronic structure and corresponding optical response of a material. For example, semiconductor quantum wells are used to enhance optical properties of laser diodes. The ability to control the growth of transition metal oxide films to atomic precision opens an exciting opportunity of engineering quantum wells in these materials. The wide range of transition metal oxide band gaps offers unprecedented control of confinement while the strong correlation of d-electrons allows for various cooperative phenomena to come into play. Here, we combine density functional theory and tight-binding model Hamiltonian analysis to provide a simple physical picture of transition metal oxide quantum well states using a SrO/SrTiO{sub 3}/SrO heterostructure as an example. The optical properties of the well are investigated by computing the frequency-dependent dielectric functions. The effect of an external electric field, which is essential for electro-optical devices, is also considered.

  1. Optical properties of transition metal oxide quantum wells

    NASA Astrophysics Data System (ADS)

    Lin, Chungwei; Posadas, Agham; Choi, Miri; Demkov, Alexander A.

    2015-01-01

    Fabrication of a quantum well, a structure that confines the electron motion along one or more spatial directions, is a powerful method of controlling the electronic structure and corresponding optical response of a material. For example, semiconductor quantum wells are used to enhance optical properties of laser diodes. The ability to control the growth of transition metal oxide films to atomic precision opens an exciting opportunity of engineering quantum wells in these materials. The wide range of transition metal oxide band gaps offers unprecedented control of confinement while the strong correlation of d-electrons allows for various cooperative phenomena to come into play. Here, we combine density functional theory and tight-binding model Hamiltonian analysis to provide a simple physical picture of transition metal oxide quantum well states using a SrO/SrTiO3/SrO heterostructure as an example. The optical properties of the well are investigated by computing the frequency-dependent dielectric functions. The effect of an external electric field, which is essential for electro-optical devices, is also considered.

  2. Pseudopotentials for quantum Monte Carlo studies of transition metal oxides

    SciTech Connect

    Krogel, Jaron T.; Santana Palacio, Juan A.; Reboredo, Fernando A.

    2016-02-22

    Quantum Monte Carlo (QMC) calculations of transition metal oxides are partially limited by the availability of high-quality pseudopotentials that are both accurate in QMC and compatible with major plane-wave electronic structure codes. We have generated a set of neon-core pseudopotentials with small cutoff radii for the early transition metal elements Sc to Zn within the local density approximation of density functional theory. The pseudopotentials have been directly tested for accuracy within QMC by calculating the first through fourth ionization potentials of the isolated transition metal (M) atoms and the binding curve of each M-O dimer. We find the ionization potentials to be accurate to 0.16(1) eV, on average, relative to experiment. The equilibrium bond lengths of the dimers are within 0.5(1)% of experimental values, on average, and the binding energies are also typically accurate to 0.18(3) eV. The level of accuracy we find for atoms and dimers is comparable to what has recently been observed for bulk metals and oxides using the same pseudopotentials. Our QMC pseudopotential results compare well with the findings of previous QMC studies and benchmark quantum chemical calculations.

  3. Pseudopotentials for quantum Monte Carlo studies of transition metal oxides

    DOE PAGES

    Krogel, Jaron T.; Santana Palacio, Juan A.; Reboredo, Fernando A.

    2016-02-22

    Quantum Monte Carlo (QMC) calculations of transition metal oxides are partially limited by the availability of high-quality pseudopotentials that are both accurate in QMC and compatible with major plane-wave electronic structure codes. We have generated a set of neon-core pseudopotentials with small cutoff radii for the early transition metal elements Sc to Zn within the local density approximation of density functional theory. The pseudopotentials have been directly tested for accuracy within QMC by calculating the first through fourth ionization potentials of the isolated transition metal (M) atoms and the binding curve of each M-O dimer. We find the ionization potentialsmore » to be accurate to 0.16(1) eV, on average, relative to experiment. The equilibrium bond lengths of the dimers are within 0.5(1)% of experimental values, on average, and the binding energies are also typically accurate to 0.18(3) eV. The level of accuracy we find for atoms and dimers is comparable to what has recently been observed for bulk metals and oxides using the same pseudopotentials. Our QMC pseudopotential results compare well with the findings of previous QMC studies and benchmark quantum chemical calculations.« less

  4. Defects and ferromagnetism in transition metal doped zinc oxide

    NASA Astrophysics Data System (ADS)

    Thapa, Sunil

    Transition metal doped zinc oxide has been studied recently due to its potential application in spintronic devices. The magnetic semiconductor, often called Diluted Magnetic Semiconductors (DMS), has the ability to incorporate both charge and spin into a single formalism. Despite a large number of studies on ferromagnetism in ZnO based DMS and the realization of its room temperature ferromagnetism, there is still a debate about the origin of the ferromagnetism. In this work, the synthesis and characterization of transition metal doped zinc oxide have been carried out. The sol-gel method was used to synthesize thin films, and they were subsequently annealed in air. Characterization of doped zinc oxide films was carried out using the UV-visible range spectrometer, scanning electron microscopy, superconducting quantum interference device (SQUID), x-ray diffraction(XRD) and positron annihilation spectroscopy. Hysteresis loops were obtained for copper and manganese doped zinc oxide, but a reversed hysteresis loop was observed for 2% Al 3% Co doped zinc oxide. The reversed hysteresis loop has been explained using a two-layer model.

  5. Low temperature synthesis of transition metal oxides containing surfactant ions

    NASA Astrophysics Data System (ADS)

    Janauer, Gerald Gilbert

    1998-11-01

    Recently there has been much interest in reacting vanadium oxides hydrothermally with cationic surfactants to form novel layered compounds. A series of new transition metal oxides, however, has also been formed at or near room temperature in open containers. Synthesis, characterization, and proposed mechanisms of formation are the focus of this work. Low temperature reactions of vanadium pentoxide and ammonium transition metallates with long chain amine surfactants, such as dodecyltrimethylammonium bromide yielded interesting new products many of which are layered phases. DTAsb4\\ Hsb2Vsb{10}Osb{28}. 8Hsb2O, a layered highly crystalline phase, is the first such phase for which a single crystal X-ray structure has been determined. The unit cell for this material was found to be triclinic with space group P1-, cell parameters a=9.8945(3)A, b=11.5962(1)A, c=21.9238(2)A, alpha=95.153(2)sp°,\\ beta=93.778(1)sp°, and gamma=101.360(1)sp°. Additionally, a novel tungsten, a molybdenum and a dichromate phase will be discussed. Both the tungsten and the dichromate materials were indexed from their powder diffraction patterns yielding monoclinic unit cells. The tungsten material was found to have a=50.56(4)A, b=54.41(4)A, c=13.12(1)A, and beta=99.21sp°. The dichromate compound was determined to have a=26.757(5)A, b=10.458(2)A, c=14.829(3)A and beta=98.01(1)sp°. Interlayer spacings for the lamellar dichromate and molybdenum phases were d001 = 28.7 A, and d001 = 22.9 A. The synthesis, characterization, composition, and structure of these transition metal oxide-surfactant materials will be discussed.

  6. Flexible Transition Metal Oxide Electronics and Imprint Lithography

    NASA Astrophysics Data System (ADS)

    Jackson, Warren B.

    The previous chapters have discussed inorganic low-deposition temperature materials suitable for flexible applications, such as amorphous and nano-crystalline-silicon (Si) and organic conductors. This chapter presents the results of a recently developed inorganic low-temperature materials system, transition metal oxides (TMOs), that appears to be a very promising, new high-performance flexible electronic materials system. An equally, if not more, important part of this chapter, is the presentation of self-aligned imprint lithography (SAIL) a new fabrication method for flexible substrates that solves the layer-to-layer alignment problem.

  7. Electrocatalysis using transition metal carbide and oxide nanocrystals

    NASA Astrophysics Data System (ADS)

    Regmi, Yagya N.

    Carbides are one of the several families of transition metal compounds that are considered economic alternatives to catalysts based on noble metals and their compounds. Phase pure transition metal carbides of group 4-6 metals, in the first three periods, were synthesized using a common eutectic salt flux synthesis method, and their electrocatalytic activities compared under uniform electrochemical conditions. Mo2C showed highest hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) activities among the nine metal carbides investigated, but all other metal carbides also showed substantial activities. All the metal carbides showed remarkable enhancement in catalytic activities as supports, when compared to traditional graphitic carbon as platinum support. Mo2C, the most active transition metal carbide electrocatalyst, was prepared using four different synthesis routes, and the synthesis route dependent activities compared. Bifunctional Mo 2C that is HER as well as oxygen evolution reaction (OER) active, was achieved when the carbide was templated on a multiwalled carbon nanotube using carbothermic reduction method. Bimetallic carbides of Fe, Co, and Ni with Mo or W were prepared using a common carbothermic reduction method. Two different stoichiometries of bimetallic carbides were obtained for each system within a 60 °C temperature window. While the bimetallic carbides showed relatively lower electrocatalytic activities towards HER and ORR in comparison to Mo2C and WC, they revealed remarkably higher OER activities than IrO2 and RuO2, the state-of-the-art OER catalysts. Bimetallic oxides of Fe, Co, and Ni with Mo and W were also prepared using a hydrothermal synthesis method and they also revealed OER activities that are much higher than RuO2 and IrO2. Additionally, the OER activities were dependent on the degree and nature of hydration in the bimetallic oxide crystal lattice, with the completely hydrated, as synthesized, cobalt molybdate and nickel

  8. Quantum spin Hall effect in a transition metal oxide Na2IrO3

    SciTech Connect

    Shitade, Atsuo

    2010-05-26

    We study theoretically the electronic states in a 5d transition metal oxide Na{sub 2}I{sub r}O{sub 3}, in which both the spin-orbit interaction and the electron correlation play crucial roles. Tight-binding model analysis together with the fisrt-principles band structure calculation predicts that this material is a layered quantum spin Hall system. Due to the electron correlation, an antiferromagnetic order first develops at the edge, and later inside the bulk at low temperatures.

  9. Nanostructured transition metal oxides for energy storage and conversion

    NASA Astrophysics Data System (ADS)

    Li, Qiang

    Lithium-ion batteries, supercapacitors and photovoltaic devices have been widely considered as the three major promising alternatives of fossil fuels facing upcoming depletion to power the 21th century. The conventional film configuration of electrochemical electrodes hardly fulfills the high energy and efficiency requirements because heavy electroactive material deposition restricts ion diffusion path, and lowers power density and fault tolerance. In this thesis, I demonstrate that novel nanoarchitectured transition metal oxides (TMOs), e.g. MnO2, V2O 5, and ZnO, and their relevant nanocomposites were designed, fabricated and assembled into devices to deliver superior electrochemical performances such as high energy and power densities, and rate capacity. These improvements could be attributed to the significant enhancement of surface area, shortened ion diffusion distances and facile penetration of electrolyte solution into open structures of networks as well as to the pseudocapacitance domination. The utilization of ForcespinningRTM, a newly developed nanofiber processing technology, for large-scale energy storage and conversion applications is emphasized. This process simplifies the tedious multi-step hybridization synthesis and facilitates the contradiction between the micro-batch production and the ease of large-scale manufacturing. Key Words: Transition metal oxides, energy storage and conversion, ForcespinningRTM, pseudocapacitance domination, high rate capacity

  10. Quantum Monte Carlo Calculations of Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Wagner, Lucas

    2006-03-01

    Quantum Monte Carlo is a powerful computational tool to study correlated systems, allowing us to explicitly treat many-body interactions with favorable scaling in the number of particles. It has been regarded as a benchmark tool for first and second row condensed matter systems, although its accuracy has not been thoroughly investigated in strongly correlated transition metal oxides. QMC has also historically suffered from the mixed estimator error in operators that do not commute with the Hamiltonian and from stochastic uncertainty, which make small energy differences unattainable. Using the Reptation Monte Carlo algorithm of Moroni and Baroni(along with contributions from others), we have developed a QMC framework that makes these previously unavailable quantities computationally feasible for systems of hundreds of electrons in a controlled and consistent way, and apply this framework to transition metal oxides. We compare these results with traditional mean-field results like the LDA and with experiment where available, focusing in particular on the polarization and lattice constants in a few interesting ferroelectric materials. This work was performed in collaboration with Lubos Mitas and Jeffrey Grossman.

  11. Sonochemical synthesis of mesoporous transition metal and rare earth oxides.

    PubMed

    Wang, Yanqin; Yin, Lunxiang; Gedanken, Arahon

    2002-11-01

    Straight-extended layered mesostructures based on transItion metal (Fe, Cr) and rare earth (Y, Ce, La, Sm, Er) oxides are synthesized by sonication for 3 h. After a longer period of sonication (6 h), hexagonal mesostructures based on Y- and Er-oxides are obtained. The surface areas of the Y-based hexagonal mesophases before and after extraction are 46.5, 256 m2/g, respectively. For Er-based hexagonal mesophases, the surface areas before and after extraction are 157 and 225 m2/g. The pore sizes after extraction are 5.0 and 2.2 nm for Y- and Er-based mesophases, respectively. Hexagonal mesostructures are also obtained for Zr-based material after sonication for 3 h and the hexagonal structure is still maintained after calcinations at 400 degrees C for 4 h, although the surface area is only 35 m2/g.

  12. Investigations of Transition Metal Oxide with the Perovskite Structure as Potential Multiferroics

    DTIC Science & Technology

    2008-10-01

    Investigation of Transition Metal Oxides with the Perovskite Structure as Potential Multiferroics by Virginia Lea Miller and Steven C. Tidrow...Adelphi, MD 20783-1197 ARL-TR-4621 October 2008 Investigation of Transition Metal Oxides with the Perovskite Structure as Potential...5b. GRANT NUMBER 4. TITLE AND SUBTITLE Investigation of Transition Metal Oxides with the Perovskite Structure as Potential Multiferroics 5c

  13. Resonant Ultrasound Studies of Complex Transition Metal Oxides

    SciTech Connect

    Dr. Henry Bass; Dr. J. R. Gladden

    2008-08-18

    Department of Energy EPSCoR The University of Mississippi Award: DE-FG02-04ER46121 Resonant Ultrasound Spectroscopy Studies of Complex Transition Metal Oxides The central thrust of this DOE funded research program has been to apply resonant ultrasound spectroscopy (RUS), an elegant and efficient method for determining the elastic stiffness constants of a crystal, to the complex and poorly understood class of materials known as transition metal oxides (TMOs). Perhaps the most interesting and challenging feature of TMOs is their strongly correlated behavior in which spin, lattice, and charge degrees of freedom are strongly coupled. Elastic constants are a measure of the interatomic potentials in a crystal and are thus sensitive probes into the atomic environment. This sensitivity makes RUS an ideal tool to study the coupling of phase transition order parameters to lattice strains. The most significant result of the project has been the construction of a high temperature RUS apparatus capable of making elastic constant measurements at temperatures as high as 1000 degrees Celsius. We have designed and built novel acoustic transducers which can operate as high as 600 degrees Celsius based on lithium niobate piezoelectric elements. For measurement between 600 to 1000 C, a buffer rod system is used in which the samples under test and transducers are separated by a rod with low acoustic attenuation. The high temperature RUS system has been used to study the charge order (CO) transition in transition metal oxides for which we have discovered a new transition occurring about 35 C below the CO transition. While the CO transition exhibits a linear coupling between the strain and order parameter, this new precursor transition shows a different coupling indicating a fundamentally different mechanism. We have also begun a study, in collaboration with the Jet Propulsion Laboratory, to study novel thermoelectric materials at elevated temperatures. These materials include silicon

  14. Metal oxide chemistry in solution: the early transition metal polyoxoanions.

    PubMed

    Day, V W; Klemperer, W G

    1985-05-03

    Many of the early transition elements form large polynuclear metal-oxygen anions containing up to 200 atoms or more. Although these polyoxoanions have been investigated for more than a century, detailed studies of structure and reactivity were not possible until the development of modern x-ray crystallographic and nuclear magnetic resonance spectroscopic techniques. Systematic studies of small polyoxoanions in inert, aprotic solvents have clarified many of the principles governing their structure and reactivity, and also have made possible the preparation of entirely new types of covalent derivatives such as CH(2)Mo(4)O(15)H(3-), C(5)H(5)TiMo(5)O(18)(3-), and (OC)(3)Mn(Nb(2)W(4)O(19))(3-). Since most early transition metal polyoxoanions have structures based on close-packed oxygen arrays containing interstitial metal centers, their chemistry offers a rare opportunity to study chemical transformations in detail on well-defined metal oxide surfaces.

  15. Basic nanosystems of early 4d and 5d transition metals: Electronic properties and the effect of spin-orbit interaction

    NASA Astrophysics Data System (ADS)

    Bala, Anu; Nautiyal, Tashi; Auluck, Sushil

    2008-07-01

    There are various possibilities for the structure as well as for the growth of nanosystems, particularly of nanowires. The ultimate one-dimensional material—linear chains—are difficult to exploit for applications due to their transient nature. Nonetheless these are a good prototype for studying one-dimensional materials and project the kind of behavior one may expect from ultrathin nanowires. Likewise monolayers are the ultimate two-dimensional materials and their study is helpful in understanding the behavior of two-dimensional materials. We present a theoretical study on basic nanosystems—linear chains and monolayers—of the 4d (Y, Zr, Nb, Mo, and Tc) and 5d (Hf, Ta, W, and Re) transition metals of groups 3-7 by means of an all-electron density functional approach. We have explored all kinds of magnetic configurations: nonmagnetic, ferromagnetic, and antiferromagnetic, by (i) inclusion and (ii) omission of spin-orbit interaction. We find that though this interaction has a marginal effect on nanosystems of 4d transition metals, its impact becomes stronger with lowering of dimensionality. Further it has a significant effect on properties of nanosystems of 5d transition metals as well as those of bulk. It is interesting to note that the monolayers of 5d transition metals seem reluctant to order magnetically despite the general tendency of nanosystems of 4d transition metals and linear chains of 5d transition metals to woo magnetic ordering. The nanosystems with preference for antiferromagnetic ordering are found to be stable at larger nearest-neighbor distances compared to the ferromagnetic and nonmagnetic phases. Specially, antiferromagnetic monolayers of Nb and Mo are predicted to exhibit larger separations with respect to bulk, a feature observed only for some low-dimensional systems. All the monolayers, except Y, are predicted to have a nonmagnetic state almost degenerate with ferromagnetic or antiferromagnetic state. Therefore suitable substrate

  16. (S)TEM analysis of functional transition metal oxides

    NASA Astrophysics Data System (ADS)

    Chi, Miaofang

    Perovskite vanadates (AVO3) form an ideal family to study the structure-property relationships in transition metal oxides because their physical properties can easily be tailored by varying the A-site cations. (S)TEM is an ideal tool for this type of study due to its capacity for simultaneous imaging and chemical analysis. Determination of the oxidation state of vanadium in complex oxides have been carried out by electron energy loss spectroscopy. SrVO3/LaAlO3 is then studied both experimentally and theoretically as a prototype system. Extra electrons have been detected on the interface layer, and further proven to originate mainly from a change in the local bonding configuration of V at the La-O terminated substrate surface. Cr-containing stainless steel deposited with a LaCrO3 thin-film layer is a promising interconnect material of Solid Oxide Fuel Cells (SOFC). Our investigation on its microstructural evolution reveals that the LaCrO 3 thin film plays a role in inhibiting the growth of an oxide layer on the metal surface and thus protects the surface of the stainless steel. Ca-doped LaCoO3 is a promising SOFC cathode material. The domain structures and the oxidation state of Co in Ca-doped LaCoO3, which are directly related to its mechanical properties and electronic conductivity, are investigated by in-situ TEM and EELS. The formation of microcracks is observed during thermal cycles. Ca-doping in LaCoO3 is shown to not only improve the electronic conductivity of the material, but is also likely to strengthen the grain boundaries. The realization of its application in SOFCs depends on depressing the ferroelastisity to reduce strain formation during thermal cycles. The application of the (S)TEM techniques used for studying the perovskite systems are further extended to other compounds containing transition metal elements. The refractory minerals from Comet 81 P/Wild-2 are studied to investigate the formation of the early solar system. A relatively high Ti3+/Ti 4

  17. Orbital reconstruction in nonpolar tetravalent transition-metal oxide layers

    NASA Astrophysics Data System (ADS)

    Bogdanov, Nikolay A.; Katukuri, Vamshi M.; Romhányi, Judit; Yushankhai, Viktor; Kataev, Vladislav; Büchner, Bernd; van den Brink, Jeroen; Hozoi, Liviu

    2015-06-01

    A promising route to tailoring the electronic properties of quantum materials and devices rests on the idea of orbital engineering in multilayered oxide heterostructures. Here we show that the interplay of interlayer charge imbalance and ligand distortions provides a knob for tuning the sequence of electronic levels even in intrinsically stacked oxides. We resolve in this regard the d-level structure of layered Sr2IrO4 by electron spin resonance. While canonical ligand-field theory predicts g||-factors less than 2 for positive tetragonal distortions as present in Sr2IrO4, the experiment indicates g|| is greater than 2. This implies that the iridium d levels are inverted with respect to their normal ordering. State-of-the-art electronic-structure calculations confirm the level switching in Sr2IrO4, whereas we find them in Ba2IrO4 to be instead normally ordered. Given the nonpolar character of the metal-oxygen layers, our findings highlight the tetravalent transition-metal 214 oxides as ideal platforms to explore d-orbital reconstruction in the context of oxide electronics.

  18. Wannier function analysis of charge states in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Quan, Yundi; Pickett, Warren

    2015-03-01

    The charge (or oxidation) state of a cation has been a crucial concept in analyzing the electronic and magnetic properties of oxides as well as interpreting ``charge ordering'' metal-insulator transitions. In recent years a few methods have been proposed for the objective identification of charge states, beyond the conventional (and occasionally subjective) use of projected densities of states, weighted band structures (fatbands), and Born effective charges. In the past two decades Wannier functions (WFs) and particularly maximally localized WFs (MLWFs), have become an indispensable tool for several different purposes in electronic structure studies. These developments have motivated us to explore the charge state picture from the perspective of MLWFs. We will illustrate with a few transition metal oxide examples such as AgO and YNiO3 that the shape, extent, and location of the charge centers of the MLWFs provide insights into how cation-oxygen hybridization determines chemical bonding, charge distribution, and ``charge ordering.'' DOE DE-FG02-04ER46111.

  19. Intrinsic Bonding Defects in Transition Metal Elemental Oxides

    DTIC Science & Technology

    2006-01-01

    deposition, ALD. Spectroscopic studies have also been performed on nanocrystalline TiO2 , ZrO2, HfO2, and complex mixed oxides such as ZrTiO4, LaAlO3 and...5d-state and defect features are identified. Figure 2(b). SXPS valence band spectrum of TiO2 . 5d-state and defect features... TiO2 . 3d-state features are identified. Figure 4. Ti L3 edge XAS spectrum of TiO2 . Ti 3d J-T term split states are

  20. Electronic, magnetic and topological properties of transition metal oxides

    NASA Astrophysics Data System (ADS)

    Quan, Yundi

    Transition metal oxides have been the ideal platform for designing materials with exotic properties due to the complex interplay between spin, charge, and orbital degrees of freedom which can be fine-tuned by varying pressure, temperature, and external magnetic field to give rise to novel phases. Transition metal oxides are also a challenge from the theoretical point of view. The (semi)local density approximation for the exchange correlation functional that is often used in density functional calculations fails to adequately describe the many-body effects of 3d and 4f electrons thereby leading to underestimated band gaps. Several techniques, such as hybrid functionals, dynamical mean field theory, and DFT+U, have been developed over the past few decades to account for the many-body effects of 3d and 4f electrons. The DFT+U method, which will be used extensively throughout this thesis, has proved to be very successful in modeling gap opening, structure optimization and predicting transport properties. Rare earth nickelates have attracted a lot of attention in recent years due to their complex phase diagram that arises from the competition between spin, charge, and orbital degrees of freedom. Of particular interest is the metal-insulator transition that occurs upon cooling for RNiO3 (R=rare earth, except for La) which was found to be accompanied by symmetry lowering, later theorized as the evidence for charge ordering. By using first principles calculations, we found that the charge difference between Ni ions in the "charge-ordered" phase is negligibly small, while various aspects such as core energy levels, spectral weight immediately above and below the Fermi level, and magnetic moments do differ. Using Wannier function analysis, the charge states of Ni ions in the lower symmetry structure are systematically studied and found to correlated to the number of Wannier charge centers at the Ni site. The same approach was applied to study the charge states of Ag I and Ag

  1. APCVD Transition Metal Oxides - Functional Layers in "Smart windows"

    NASA Astrophysics Data System (ADS)

    Gesheva, K. A.; Ivanova, T. M.; Bodurov, G. K.

    2014-11-01

    Transition metal oxides (TMO) exhibit electrochromic effect. Under a small voltage they change their optical transmittance from transparent to collored (absorbing) state. The individual material can manifest its electrochromic properties only when it is part of electrochromic (EC) multilayer system. Smart window is controlling the energy of solar flux entering the building or car and makes the interiors comfortable and energy utilization more effective. Recently the efforts of material researchers in this field are directed to price decreasing. APCVD technology is considered as promissing as this process permits flowthrough large-scale production process. The paper presents results on device optimization based on WO3-MoO3 working electrode. Extensive research reveals that WO3-MoO3 structure combines positive features of single oxides: excellent electrochromic performance of WO3 and better kinetic properties of MoO3 deposition. The achieved color efficiency of APCVD WO3-MoO3 films is 200cm2/C and optical modulation of 65-70% are practically favorable electrochromic characteristics. To respond to low cost requirement, the expensive hexacarbonyl can be replaced with acetylacetonate. We have started with this precursor to fabricate mixed WxV1-xO3 films. The films possess excellent surface coverage and high growth-rate. CVD deposition of VO2, a promissing thermochromic thin film material is also presented.

  2. Hybrid functional studies of defects in layered transition metal oxides

    NASA Astrophysics Data System (ADS)

    Hoang, Khang; Johannes, Michelle

    2014-03-01

    Layered oxides LiMO2 (M is a transition metal) have been studied extensively for Li-ion battery cathodes. It is known that defects have strong impact on the electrochemical performance. A detailed understanding of native point defects in LiMO2 is however still lacking, thus hindering rational design of more complex materials for battery applications. In fact, first-principles defect calculations in LiMO2 are quite challenging because standard density functional theory (DFT) calculations using the generalized gradient approximation (GGA) of the exchange-correlation functional fail to reproduce the correct physics. The GGA+U extension can produce reasonable results, but the transferability of U across the compounds is limited. In this talk, we present our DFT studies of defects in LiMO2 (M=Co, Ni) using the Heyd-Scuseria-Ernzerhof (HSE) screened hybrid functional. The dominant point defects will be identified and compared with experiment; and their impact on the structural stability and the charge (electronic and ionic) and mass transport will be addressed. We will also discuss possible shortcomings of the HSE functional in the study of these electron-correlated materials.

  3. Spin-Orbital Entangled States in Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Oleś, Andrzej M.

    The phenomenon of spin-orbital entanglement which occurs in superexchange models for transition metal oxides is introduced and explained. We present its consequences in the RVO_3 Mott insulators, with R=La,Pr,\\cdots ,Yb,Lu, and show that entanglement occurs here in excited states of the spin-orbital d^2 model and determines: (i) the temperature dependence of low-energy optical spectral weight, (ii) the phase diagram of the RVO_3 perovskites, and (iii) the dimerization observed in the magnon excitations in YVO_3. Entangled ground states occur in two other model systems: (i) the bilayer d^9 (Kugel-Khomskii) model, and (ii) the d^1 model on the triangular frustrated lattice. In such cases even the predictions concerning the magnetic exchange constants based on the mean field decoupling of spin and orbital operators are incorrect. On the example of a single hole doped to a Mott insulator with coexisting antiferromagnetic and alternating t_{2g} orbital order we show that transport is hindered by spin-orbital excitations. It is suggested that spin-orbital entanglement in Mott insulators might be controlled by doping, leading to orbital disordered states with possible new opportunities for thermoelectric applications.

  4. Lithium vanadium oxide: A heavy fermion transition metal oxide

    NASA Astrophysics Data System (ADS)

    Kondo, Shinichiro

    LiVsb2Osb4 has the face-centered-cubic normal-spinel structure and is a metal. The preparative method and characterization of high-purity polycrystalline samples are herein reported. The intrinsic susceptibility chi, electronic heat capacity Csbe, nuclear magnetic resonance and thermal expansion measurements revealed that LiVsb2Osb4 shows a crossover from high temperature T localized magnetic moment behavior to low-T heavy Fermi liquid behavior. chi follows the Curie-Weiss law above ˜50 K with a Curie constant corresponding to a V S=1/2 spin and g-factor ˜2. The Weiss temperature indicates antiferromagnetic interactions between V local moments. chi becomes nearly T independent below ˜30K with a shallow broad maximum at T≈16K. Field-cooled and zero-field-cooled magnetization measurements in low applied magnetic fields H=10{-}100 G from 1.8 to 50 K showed no evidence for spin-glass ordering. The small amounts of paramagnetic impurities (S=3/2 to 4) in the samples were characterized using low-T isothermal magnetization Mspobs(H) measurement data. The observed electronic heat capacity coefficient gammaequiv Csbe/T≈0.42 J/mol Ksp2 at 1 K is extraordinarily large for a transition metal compound, the Wilson ratio ≈1.7, and the Korringa ratio ≈0.5. X-ray and neutron diffraction measurements down to 4 K found no distortion from the cubic structure. Neutron diffraction and dilatometry measurements indicate a strong enhancement of the thermal expansion coefficient and Gruneisen parameter below ˜20 K. Muon spin relaxation for a magnetically pure sample showed no evidence of static magnetic ordering above 0.02 K. Superconductivity was not observed above 0.01 K. All these measurements are consistent with a heavy Fermi liquid (HF) interpretation at low T. Theories which apply to some conventional f-electron HF compounds, the Kondo and Coqblin-Schrieffer models, fail to self-consistently explain chi(T) and Csbe(T) of LiVsb2Osb4. Geometric frustration inherent in the V

  5. Spectroscopic signatures of molecular orbitals in transition metal oxides with a honeycomb lattice

    NASA Astrophysics Data System (ADS)

    Pchelkina, Z. V.; Streltsov, S. V.; Mazin, I. I.

    2016-11-01

    A tendency to form benzenelike molecular orbitals has recently been shown to be a common feature of the 4 d and 5 d transition metal oxides with a honeycomb lattice. This tendency competes with other interactions such as the spin-orbit coupling and Hubbard correlations and can be partially or completely suppressed. In the calculations, SrRu2O6 presents the cleanest case of well-formed molecular orbitals so far; however, direct experimental evidence for or against this proposition has been missing. In this paper, we show that combined photoemission and optical studies can be used to identify molecular orbitals in SrRu2O6 . Symmetry-driven election selection rules suppress optical transitions between certain molecular orbitals, while photoemission and inverse photoemission measurements are insensitive to them. Comparing the photoemission and optical conductivity spectra, one should be able to observe clear signatures of molecular orbitals.

  6. Fingerprints of spin-orbital entanglement in transition metal oxides.

    PubMed

    Oleś, Andrzej M

    2012-08-08

    The concept of spin-orbital entanglement on superexchange bonds in transition metal oxides is introduced and explained on several examples. It is shown that spin-orbital entanglement in superexchange models destabilizes the long-range (spin and orbital) order and may lead either to a disordered spin-liquid state or to novel phases at low temperature which arise from strongly frustrated interactions. Such novel ground states cannot be described within the conventionally used mean field theory which separates spin and orbital degrees of freedom. Even in cases where the ground states are disentangled, spin-orbital entanglement occurs in excited states and may become crucial for a correct description of physical properties at finite temperature. As an important example of this behaviour we present spin-orbital entanglement in the RV O(3) perovskites, with R = La,Pr,…,Y b,Lu, where the finite temperature properties of these compounds can be understood only using entangled states: (i) the thermal evolution of the optical spectral weights, (ii) the dependence of the transition temperatures for the onset of orbital and magnetic order on the ionic radius in the phase diagram of the RV O(3) perovskites, and (iii) the dimerization observed in the magnon spectra for the C-type antiferromagnetic phase of Y V O(3). Finally, it is shown that joint spin-orbital excitations in an ordered phase with coexisting antiferromagnetic and alternating orbital order introduce topological constraints for the hole propagation and will thus radically modify the transport properties in doped Mott insulators where hole motion implies simultaneous spin and orbital excitations.

  7. Transition metals

    PubMed Central

    Rodrigo-Moreno, Ana; Poschenrieder, Charlotte; Shabala, Sergey

    2013-01-01

    Transition metals such as Iron (Fe) and Copper (Cu) are essential for plant cell development. At the same time, due their capability to generate hydroxyl radicals they can be potentially toxic to plant metabolism. Recent works on hydroxyl-radical activation of ion transporters suggest that hydroxyl radicals generated by transition metals could play an important role in plant growth and adaptation to imbalanced environments. In this mini-review, the relation between transition metals uptake and utilization and oxidative stress-activated ion transport in plant cells is analyzed, and a new model depicting both apoplastic and cytosolic mode of ROS signaling to plasma membrane transporters is suggested. PMID:23333964

  8. Transition-Metal Oxides in Warm Circumstellar Environments

    NASA Astrophysics Data System (ADS)

    Schmidt, Mirosław R.; Kaminski, Tomasz; Tylenda, Romuald

    2013-06-01

    We report on detections and simulations of electronic bands of transition-metal oxides, i.e. ScO, TiO, VO, CrO, YO, and of AlO, in spectra of two red novae V838 Mon and V4332 Sgr. These objects experienced a stellar merger event in 2002 and 1994, respectively, and have very rich circumstellar environments abundant in dust and molecules. We analyzed optical spectra of V838 Mon which show a presence of outflowing material. In this object, electronic systems of oxides are observed in absorption against a photospheric spectrum which resembles that of a late-type supergiant. We present simulations of the absorption bands which allowed us to derive the excitation temperatures of 300-500 K and constrain column densities, which turned out to be very high. Among many interesting features discovered, we identified forbidden transitions of TiO in the b^1Π-X^3Δ and c^{1}Φ-X^{3}Δ systems, which are seen owing to the high column densities and the relatively low temperatures. In the case of the older red nova V4332 Sgr, the main object is surrounded by a circumstellar disc which is seen almost edge-on and obscures the central star. The molecular spectra are seen in emission in this object, what is very unusual in astrophysical sources observed at optical wavelengths. We show that these emission bands arise owing to the special geometry of the star-disk system and that radiative pumping is responsible for excitation of the molecules. From the shapes of the rotational contours, we derive temperatures of about 120 K in this object. Remarkably, the spectra of V4332 Sgr contain features of CrO, which is the first identified signature of this molecule in an astrophysical object. In addition to the excitation and radiative-transfer analysis of the molecular spectra, we discuss chemical pathways that could lead to the observed variety of metal oxides seen in these enigmatic sources. T. Kaminski, M. Schmidt, R. Tylenda, M. Konacki, and M. Gromadzki ApJSuppl., {182} (33), 2009. T

  9. Magnetic and Orbital Structures in Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Khomskii, Daniel

    2002-03-01

    The interplay of different degrees of freedom (charge, spin, orbital, lattice) determine all the rich properties of transition metal oxides. In particular, spin and orbital orderings appear to be especially strongly coupled. At least this is the case in perovskite-like systems with (almost) 180-degree metal-oxygen-metal bonds. The coupled spins and orbitals in this case can be described by the effective Hamiltonian of the type H = A(S*S)+B(T*T)+C(S*S)(T*T), where S and T are the spin and pseudospin of an ion ( describing an orbital occupation). In conventional cases, e.g. in perovskites, the constants A, B, C are of the same order, which determines strong coupling between spins and orbitals. However this electronic mechanism is not the only one leading to orbital ordering. The conventional Jahn-Teller interaction can also contribute to the latter, and it is not always clear which mechanism dominates. In this talk I will consider two questions. The first is the possibility to describe different orbital (and charge) superstructures in oxides, in particular in manganites, using the electron-lattice (elastic) interaction [1]. One can show that due to specific features of these interactions, one can naturally get in this mechanism different superstructures, including stripes. The second question concerns the form which these mechanisms take in systems with more complicated crystal structures - notably in oxides with 90-degree bonds. To these systems belong in particular some systems with geometric frustrations, e.g. some spinels, or LiNiO2, NaNiO2. We show that the exchange interaction in case of orbital degeneracy has for these systems the form much different from the perovskites: spin and orbital degrees of freedom are essentially decoupled, orbital exchange being much stronger even in the absence of electron-lattice interaction. We obtain corresponding exchange Hamiltonian, and consider the orbital and spin structure in systems like LiNiO2 [2], in which, due to a

  10. L2 and L3 measurements of transition-metal 5d orbital occupancy, spin-orbit effects, and chemical bonding

    NASA Astrophysics Data System (ADS)

    Qi, Boyun; Perez, I.; Ansari, P. H.; Lu, F.; Croft, M.

    1987-08-01

    We present L2 and L3 x-ray absorption spectroscopy measurements on all of the 5d transition-metal (T) elements and selected TAl2 intermetallic compounds. For the 5d elements we discuss the general trends in the strength of the near-edge "white-line" (WL) feature, the manifestations of the spin-orbit effects, and the dearth of WL strength for Pt and Au. The changes in the intensity of the L-edge WL's in the intermetallic compounds TAl2 (T=Au and Pt) are discussed in terms of strong T-Al chemical bonding. Interestingly, our results for this bonding in AuAl2 are in good agreement with the arguments presented by Pauling [

    The Nature of the Chemical Bond (Cornell Univ. Press, Ithaca, NY, 1960), pp. 431-435
    ].

  11. Porous nanoarchitectures of spinel-type transition metal oxides for electrochemical energy storage systems.

    PubMed

    Park, Min-Sik; Kim, Jeonghun; Kim, Ki Jae; Lee, Jong-Won; Kim, Jung Ho; Yamauchi, Yusuke

    2015-12-14

    Transition metal oxides possessing two kinds of metals (denoted as AxB3-xO4, which is generally defined as a spinel structure; A, B = Co, Ni, Zn, Mn, Fe, etc.), with stoichiometric or even non-stoichiometric compositions, have recently attracted great interest in electrochemical energy storage systems (ESSs). The spinel-type transition metal oxides exhibit outstanding electrochemical activity and stability, and thus, they can play a key role in realising cost-effective and environmentally friendly ESSs. Moreover, porous nanoarchitectures can offer a large number of electrochemically active sites and, at the same time, facilitate transport of charge carriers (electrons and ions) during energy storage reactions. In the design of spinel-type transition metal oxides for energy storage applications, therefore, nanostructural engineering is one of the most essential approaches to achieving high electrochemical performance in ESSs. In this perspective, we introduce spinel-type transition metal oxides with various transition metals and present recent research advances in material design of spinel-type transition metal oxides with tunable architectures (shape, porosity, and size) and compositions on the micro- and nano-scale. Furthermore, their technological applications as electrode materials for next-generation ESSs, including metal-air batteries, lithium-ion batteries, and supercapacitors, are discussed.

  12. Comparison of Transition Metal-Mediated Oxidation Reactions of Guanine in Nucleoside and Single-Stranded Oligodeoxynucleotide Contexts.

    PubMed

    Ghude, Pranjali; Schallenberger, Mark A; Fleming, Aaron M; Muller, James G; Burrows, Cynthia J

    2011-04-15

    As the most readily oxidized of DNA's four natural bases, guanine is a prime target for attack by reactive oxygen species (ROS) and transition metal-mediated oxidants. The oxidation products of a modified guanosine nucleoside and of a single-stranded oligodeoxynucleotide, 5'-d(TTTTTTTGTTTTTTT)-3' have been studied using oxidants that include Co(II), Ni(II), and Ir(IV) compounds as well as photochemically generated oxidants such as sulphate radical, electron-transfer agents (riboflavin) and singlet oxygen. The oxidized lesions formed include spiroiminodihydantoin (Sp), guanidinohydantoin (Gh), imidazolone (Iz), oxazolone (Z) and 5-carboxamido-5-formamido-2-iminohydantion (2-Ih) nucleosides with a high degree of dependence on the exact oxidation system employed. Interestingly, a nickel(II) macrocyclic complex in conjunction with KHSO(5) leads to the recently reported 2-Ih heterocycle as the major product in both the nucleoside and oligonucleotide contexts.

  13. Electronic transitions and multiferroicity in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Zhou, Haidong

    Four systems have been studied for the localized-itinerant electronic transition in transition-metal oxides: (i) In CaV1- xTixO3, substitution of Ti(IV) introduces Anderson-localized states below a mobility edge mu c that increases with x, crossing epsilon F in the range 0.2 < x< 0.4 and also transforms the strong-correlation fluctuations to localized V(IV): t1e0 configurations for x ≥ 0.1. (ii) The properties of LaTiO3+delta reveal that a hole-poor, strongly correlated electronic phase coexists with a hole-rich, itinerant-electron phase. With delta ≥ 0.03, the hole-rich phase exists as a minority phase of isolated, mobile itinerant-electron clusters embedded in the hole-poor phase. With delta ≥ 0.08, isolated hole-poor clusters are embedded in an itinerant-electron matrix. As delta > 0.08 increases, the hole-poor clusters become smaller and more isolated until they are reduced to super-paramagnetic strong-correlation fluctuations by delta = 0.12. (iii) The data of Y1-xLaxTiO 3 appears to distinguish an itinerant-electron antiferromagnetic phase in the La-rich samples from a localized-electron ferromagnetic phase with a cooperative Jahn-Teller distortion in the Y-rich phase. (iv) The transition at Tt in Mg[Ti2]O4 is a semiconductor-semiconductor transition associated with Ti-Ti dimerization instabilities. The dimerization is caused by lattice instabilities resulting from a double-well Ti-Ti bond potential at a crossover from localized to itinerant electronic behavior. RMn1-xGaxO 3 (R = Ho, Y) and Ho1-xY xMnO3 have been studied for the multiferroicity of RMnO3. Ga doping raises the ferrielectric Curie temperature TC and the Mn-spin reorientation temperature TSR while lowering TN of the Mn spins and the Ho magnetic ordering temperature T 2. The data show an important coupling between the Mn3+-ion and HO3+-ion spins as well as a TSR that is driven by a cooperative MnO5 site rotation and R 3+-ion displacements that modify the c lattice parameter. The data also

  14. Modeling STM tips by single absorbed atoms on W(100) films: 3d, 4d and 5d transition metal atoms

    NASA Astrophysics Data System (ADS)

    Hofer, Werner; Redinger, Josef; Kresse, Georg; Podloucky, Raimund

    2000-03-01

    In order to provide comprehensive data on the electronic structure of realistic STM-tips we have calculated W(100) films with single 3d, 4d and 5d transition metal apex atoms by first principles molecular dynamics and full potential methods. Molecular dynamics using ultrasoft pseudopotentials (VASP) has been used to determine the relaxation of the surface layers. The electronic structure of the relaxed film has been calculated by a first principles full potential method with two-dimensional boundary conditions (FLEUR), which seems most suitable to reproduce subtle surface effects. The results suggest that the chemical nature of the tip apex determines to a high degree achievable corrugations and that correct results for the current and corrugation values in a perturbation approach can only be obtained by including the full electronic structure of the tip.

  15. Band gap tuning in transition metal oxides by site-specific substitution

    DOEpatents

    Lee, Ho Nyung; Chisholm, Jr., Matthew F; Jellison, Jr., Gerald Earle; Singh, David J; Choi, Woo Seok

    2013-12-24

    A transition metal oxide insulator composition having a tuned band gap includes a transition metal oxide having a perovskite or a perovskite-like crystalline structure. The transition metal oxide includes at least one first element selected form the group of Bi, Ca, Ba, Sr, Li, Na, Mg, K, Pb, and Pr; and at least one second element selected from the group of Ti, Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zr, Nb, Mo, Ru, Rh, Hf, Ta, W, Re, Os, Ir, and Pt. At least one correlated insulator is integrated into the crystalline structure, including REMO.sub.3, wherein RE is at least one Rare Earth element, and wherein M is at least one element selected from the group of Co, V, Cr, Ni, Mn, and Fe. The composition is characterized by a band gap of less of 4.5 eV.

  16. In Situ Electrochemical Oxidation Tuning of Transition Metal Disulfides to Oxides for Enhanced Water Oxidation

    PubMed Central

    2015-01-01

    The development of catalysts with earth-abundant elements for efficient oxygen evolution reactions is of paramount significance for clean and sustainable energy storage and conversion devices. Our group demonstrated recently that the electrochemical tuning of catalysts via lithium insertion and extraction has emerged as a powerful approach to improve catalytic activity. Here we report a novel in situ electrochemical oxidation tuning approach to develop a series of binary, ternary, and quaternary transition metal (e.g., Co, Ni, Fe) oxides from their corresponding sulfides as highly active catalysts for much enhanced water oxidation. The electrochemically tuned cobalt–nickel–iron oxides grown directly on the three-dimensional carbon fiber electrodes exhibit a low overpotential of 232 mV at current density of 10 mA cm–2, small Tafel slope of 37.6 mV dec–1, and exceptional long-term stability of electrolysis for over 100 h in 1 M KOH alkaline medium, superior to most non-noble oxygen evolution catalysts reported so far. The materials evolution associated with the electrochemical oxidation tuning is systematically investigated by various characterizations, manifesting that the improved activities are attributed to the significant grain size reduction and increase of surface area and electroactive sites. This work provides a promising strategy to develop electrocatalysts for large-scale water-splitting systems and many other applications. PMID:27162978

  17. Numerical study of Resonant inelastic x-ray scattering for cuprates and transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Jia, Chunjing; Wang, Yao; Chen, Cheng-Chien; Moritz, Brian; Devereaux, Thomas

    A theoretical understanding of resonant inelastic x-ray scattering (RIXS) measurements on cuprates and other transition-metal oxides remains an important yet challenging topic, especially for its ability to resolve the momentum and photon-polarization dependence of low energy elementary excitations. Here we present our exact diagonalization studies for RIXS spectra at the Cu L-edge for cuprates, with a focus on the dependence of both incoming and outgoing photon polarization and incoming photon energy. A more general method for calculating RIXS on other transition-metal oxides (such as NiO), which includes the multiplet and charge-transfer effects, will also be discussed.

  18. Nanophase transition metal oxides show large thermodynamically driven shifts in oxidation-reduction equilibria.

    PubMed

    Navrotsky, Alexandra; Ma, Chengcheng; Lilova, Kristina; Birkner, Nancy

    2010-10-08

    Knowing the thermodynamic stability of transition metal oxide nanoparticles is important for understanding and controlling their role in a variety of industrial and environmental systems. Using calorimetric data on surface energies for cobalt, iron, manganese, and nickel oxide systems, we show that surface energy strongly influences their redox equilibria and phase stability. Spinels (M(3)O(4)) commonly have lower surface energies than metals (M), rocksalt oxides (MO), and trivalent oxides (M(2)O(3)) of the same metal; thus, the contraction of the stability field of the divalent oxide and expansion of the spinel field appear to be general phenomena. Using tabulated thermodynamic data for bulk phases to calculate redox phase equilibria at the nanoscale can lead to errors of several orders of magnitude in oxygen fugacity and of 100 to 200 kelvin in temperature.

  19. Solubility Behavior and Phase Stability of Transition Metal Oxides in Alkaline Hydrothermal Environments

    SciTech Connect

    S.E. Ziemniak

    2000-05-18

    The solubility behavior of transition metal oxides in high temperature water is interpreted by recognizing three types of chemical reaction equilibria: metal oxide hydration/dehydration, metal oxide dissolution and metal ion hydroxocomplex formation. The equilibria are quantified using thermodynamic concepts and the thermochemical properties of the metal oxides/ions representative of the most common constituents of construction metal alloys, i.e., element shaving atomic numbers between Z = 22 (Ti) and Z = 30 (Zn), are summarized on the basis of metal oxide solubility studies conducted in the laboratory. Particular attention is devoted to the uncharged metal ion hydrocomplex, M{sup Z}(OH){sub Z}(aq), since its thermochemical properties define minimum solubilities of the metal oxide at a given temperature. Experimentally-extracted values of standard partial molal entropy (S{sup 0}) for the transition metal ion neutral hydroxocomplex are shown to be influenced by ligand field stabilization energies and complex symmetry.

  20. Carbonyl clusters of transition metals on oxide supports as heterogeneous catalysts for hydrocarbon synthesis

    SciTech Connect

    Kuznetsov, B.N.; Koval`chuk, V.I.

    1995-05-01

    The methods of preparation of heterogeneous catalysts by immobilization of carbonyl clusters of transition metals on oxide supports, as well as the study of the state of supported compounds and their catalytic properties in CO hydrogenation and olefin hydroformulation are briefly reviewed.

  1. Topological phases in oxide heterostructures with light and heavy transition metal ions (invited)

    SciTech Connect

    Fiete, Gregory A.; Rüegg, Andreas

    2015-05-07

    Using a combination of density functional theory, tight-binding models, and Hartree-Fock theory, we predict topological phases with and without time-reversal symmetry breaking in oxide heterostructures. We consider both heterostructures containing light transition metal ions and those containing heavy transition metal ions. We find that the (111) growth direction naturally leads to favorable conditions for topological phases in both perovskite structures and pyrochlore structures. For the case of light transition metal elements, Hartree-Fock theory predicts the spin-orbit coupling is effectively enhanced by on-site multiple-orbital interactions and may drive the system through a topological phase transition, while heavy elements with intrinsically large spin-orbit coupling require much weaker or even vanishing electron interactions to bring about a topological phase.

  2. Transition-Metal Doped Ceria Microspheres with Nanoporous Structures for CO Oxidation

    PubMed Central

    Zhou, Lin; Li, Xiaoxiao; Yao, Ze; Chen, Zhuwen; Hong, Mei; Zhu, Rongshu; Liang, Yongye; Zhao, Jing

    2016-01-01

    Catalytic oxidation of carbon monoxide (CO) is of great importance in many different fields of industry. Until now it still remains challenging to use non-noble metal based catalysts to oxidize CO at low temperature. Herein, we report a new class of nanoporous, uniform, and transition metal-doped cerium (IV) oxide (ceria, CeO2) microsphere for CO oxidation catalysis. The porous and uniform microsphere is generated by sacrificed polymer template. Transition-metals, like Cu, Co, Ni, Mn and Fe, were doped into CeO2 microspheres. The combination of hierarchical structure and metal doping afford superior catalytic activities of the doped ceria microspheres, which could pave a new way to advanced non-precious metal based catalysts for CO oxidation. PMID:27030159

  3. Transition-Metal Doped Ceria Microspheres with Nanoporous Structures for CO Oxidation

    NASA Astrophysics Data System (ADS)

    Zhou, Lin; Li, Xiaoxiao; Yao, Ze; Chen, Zhuwen; Hong, Mei; Zhu, Rongshu; Liang, Yongye; Zhao, Jing

    2016-03-01

    Catalytic oxidation of carbon monoxide (CO) is of great importance in many different fields of industry. Until now it still remains challenging to use non-noble metal based catalysts to oxidize CO at low temperature. Herein, we report a new class of nanoporous, uniform, and transition metal-doped cerium (IV) oxide (ceria, CeO2) microsphere for CO oxidation catalysis. The porous and uniform microsphere is generated by sacrificed polymer template. Transition-metals, like Cu, Co, Ni, Mn and Fe, were doped into CeO2 microspheres. The combination of hierarchical structure and metal doping afford superior catalytic activities of the doped ceria microspheres, which could pave a new way to advanced non-precious metal based catalysts for CO oxidation.

  4. Status in calculating electronic excited states in transition metal oxides from first principles.

    PubMed

    Bendavid, Leah Isseroff; Carter, Emily Ann

    2014-01-01

    Characterization of excitations in transition metal oxides is a crucial step in the development of these materials for photonic and optoelectronic applications. However, many transition metal oxides are considered to be strongly correlated materials, and their complex electronic structure is challenging to model with many established quantum mechanical techniques. We review state-of-the-art first-principles methods to calculate charged and neutral excited states in extended materials, and discuss their application to transition metal oxides. We briefly discuss developments in density functional theory (DFT) to calculate fundamental band gaps, and introduce time-dependent DFT, which can model neutral excitations. Charged excitations can be described within the framework of many-body perturbation theory based on Green's functions techniques, which predominantly employs the GW approximation to the self-energy to facilitate a feasible solution to the quasiparticle equations. We review the various implementations of the GW approximation and evaluate each approach in its calculation of fundamental band gaps of many transition metal oxides. We also briefly review the related Bethe-Salpeter equation (BSE), which introduces an electron-hole interaction between GW-derived quasiparticles to describe accurately neutral excitations. Embedded correlated wavefunction theory is another framework used to model localized neutral or charged excitations in extended materials. Here, the electronic structure of a small cluster is modeled within correlated wavefunction theory, while its coupling to its environment is represented by an embedding potential. We review a number of techniques to represent this background potential, including electrostatic representations and electron density-based methods, and evaluate their application to transition metal oxides.

  5. Structure-property relationships: Synthesis and characterization of Perovskite-related transition metal oxides

    NASA Astrophysics Data System (ADS)

    Whaley, Louis

    The fundamental structural component of perovskite-related phases is the octahedrally coordinated transition metal ion, symbolized as BO6 . Corner-sharing networks of BO6 octahedra are present in perovskites and related Ruddlesden-Popper Phases, ABO3 and AO(ABO 3)n, respectively. Face-sharing octahedra arranged into columns are characteristic of hexagonal, perovskite-related phases, and the relationship will be described in detail in Chapter 1. Edge sharing octahedra are characteristic of Keggin- and Lindquist-type polyoxometallates, which at first glance, seem unconnected from perovskites. However, Chapter 1 will show the deep connections among all of the phases mentioned above, by starting with perovskite phases. Temperature- and field-dependent, magnetic and electronic transitions are linked to the structure by overlap of metal d-orbitals with oxygen 2p orbitals, and (in special cases) direct d-d overlap. A mixed-transition metal oxide with two or more type of B ions provides an environment in which dissimilar B-ion orbitals can interact via exchange of charge carriers (hole or electron transport). The general goal in choosing two B ions is to provide an opportunity for the large combined magnetic moment and a low barrier to hopping of charge carriers, achieved by pairing a 3d-ion having 3 to 5 unpaired d-electrons, with a 4d or 5d transition metal ion, having 1 or 2 unpaired electrons, such as Fe(III) and Mo(V), which have compatible reduction potentials (i.e., they can co-exist in the same oxide, and exchange takes place with a low barrier). This research includes the following systems: an n = 2 Ruddlesden-Popper (RP) phase, Sr3Fe5/4Mo3/4O6.9, containing 3-7% Sr2FeMoO6, as intergrowths (not separate crystal grains, by high-resolution transmission electron microscopy), and G-type antiferromagnetism below 150°K and a "partial spin-reorientation transition" by powder neutron diffraction (PND), not previously reported for n = 2 RP phases in the Sr-Fe-Mo-O system

  6. On the behavior of Bronsted-Evans-Polanyi Relations for Transition Metal Oxides

    SciTech Connect

    Vojvodic, Aleksandra

    2011-08-22

    Versatile Broensted-Evans-Polanyi (BEP) relations are found from density functional theory for a wide range of transition metal oxides including rutiles and perovskites. For oxides, the relation depends on the type of oxide, the active site and the dissociating molecule. The slope of the BEP relation is strongly coupled to the adsorbate geometry in the transition state. If it is final state-like the dissociative chemisorption energy can be considered as a descriptor for the dissociation. If it is initial state-like, on the other hand, the dissociative chemisorption energy is not suitable as descriptor for the dissociation. Dissociation of molecules with strong intramolecular bonds belong to the former and molecules with weak intramolecular bonds to the latter group. We show, for the prototype system La-perovskites, that there is a 'cyclic' behavior in the transition state characteristics upon change of the active transition metal of the oxide.

  7. Catalytic Oxidation by Transition Metal Ions in Zeolites.

    DTIC Science & Technology

    1984-09-28

    nmber) Zeolite, Oxidation Catalysis, Molybdenum Zeolite, Cobalt Zeolite, Oxygen Adduct, Cobalt-Oxygen Complexes, Epoxidation _j-J AVIATRACr .1kisa...and substrate ligands. Molybdenum-Y seolites were effective catalysts for the epoxidation of propylene using tert-butyl hydroperoxide as the source...of oxygen. They exhibited high selectivity to the epoxide , and initially were quite active. The activity, *I 0 OF, , , , , ,, , , UNCLASSIFIED -4 1 0 1

  8. Surface electronic structure and isomerization reactions of alkanes on some transition metal oxides

    NASA Astrophysics Data System (ADS)

    Katrib, A.; Logie, V.; Saurel, N.; Wehrer, P.; Hilaire, L.; Maire, G.

    1997-04-01

    XP spectra of some reduced transition metal oxides are presented. Different number of free nd,( n + 1)s valence electrons in each case could be observed by the presence of a certain density of states (DOS) at the Fermi-level in the valence band (VB) energy region of the XP spectrum. Catalytic isomerization reactions of 2-methylpentane yielding 3-methylpentane and n-hexane at 350°C have been observed on these reduced valence surface states. The bifunctionel mechanism in terms of metallic and acidic sites required for such reactions is proposed by considering the metallic properties of the rutile deformed structure through the C-axis in the case of MoO 2 and WO 2, while the oxygen atom(s) in the lattice structure exhibit Brönsted acidic properties. On the other hand, highly reduced or clean surfaces of these transition metals yield hydrogenolysis catalytic reactions for the same reactant with methane as the major product. In all cases, the exposure of the lower valence oxidation states of bulk transition metal oxides to air results in the surface partial oxidation to the stable oxides such as MoO 3, WO 3, V 2O 5 and Nb 2O 5.

  9. Quantum confinement in transition metal oxide quantum wells

    SciTech Connect

    Choi, Miri; Lin, Chungwei; Butcher, Matthew; Posadas, Agham B.; Demkov, Alexander A.; Rodriguez, Cesar; Zollner, Stefan; He, Qian; Borisevich, Albina Y.

    2015-05-11

    We report on the quantum confinement in SrTiO{sub 3} (STO) quantum wells (QWs) grown by molecular beam epitaxy. The QW structure consists of LaAlO{sub 3} (LAO) and STO layers grown on LAO substrate. Structures with different QW thicknesses ranging from two to ten unit cells were grown and characterized. Optical properties (complex dielectric function) were measured by spectroscopic ellipsometry in the range of 1.0 eV–6.0 eV at room temperature. We observed that the absorption edge was blue-shifted by approximately 0.39 eV as the STO quantum well thickness was reduced to two unit cells. This demonstrates that the energy level of the first sub-band can be controlled by the QW thickness in a complex oxide material.

  10. The Influence of Oxygen in Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Bach, P. L.; Leboran, V.; Rivadulla, F.

    2012-02-01

    The existence of a 2D metallic state at the interface between LaAlO3 and SrTiO3 (LAO/STO) has generated much excitement. Its origin has been attributed to charge redistribution to avoid a dielectric catastrophe; however, oxygen vacancies in TiO2-terminated STO can play a significant role in the electronic properties of the interface. In order to determine the nature and origin of the metallic phase, we have induced vacancies in TiO2-terminated STO single crystal substrates by annealing under controlled vacuum conditions. We report resistivity, Hall effect, and thermopower measurements on these materials and discuss their implications for the nature of the 2D electron gas at the STO surface. We have explored the possibility of gate-tuning these systems in order to fabricate single-oxide based devices. This work was supported by the Ministerio de Ciencia e Innovaci'on (Spain), grant MAT2010-16157, and the European Research Council, grant ERC-2010-StG 259082 2D THERMS.

  11. Optical properties of transition metal oxide quantum wells

    NASA Astrophysics Data System (ADS)

    Demkov, Alexander; Choi, Miri; Butcher, Matthew; Rodriguez, Cesar; He, Qian; Posadas, Agham; Borisevich, Albina; Zollner, Stefan; Lin, Chungwei; Ortmann, Elliott

    2015-03-01

    We report on the investigation of SrTiO3/LaAlO3 quantum wells (QWs) grown by molecular beam epitaxy (MBE) on LaAlO3 substrate. Structures with different QW thicknesses ranging from two to ten unit cells were grown and characterized using x-ray photoemission spectroscopy, reflection high-energy electron diffraction (RHEED), scanning transmission electron microscopy (STEM). Optical properties (complex dielectric function) were measured by spectroscopic ellipsometry (SE) in the range of 1.0 eV to 6.0 eV at room temperature. We observed that the absorption edge was blue-shifted by approximately 0.39 eV as the STO quantum well thickness was reduced to two unit cells (uc). Density functional theory and tight-binding are used to model the optical response of these heterostructures. Our results demonstrate that the energy level of the first sub-band can be controlled by the QW thickness in a complex oxide material. We acknowledge support from Air Force Office of Scientific Research (FA9550-12-10494).

  12. Graphene-based transition metal oxide nanocomposites for the oxygen reduction reaction

    NASA Astrophysics Data System (ADS)

    Sun, Meng; Liu, Huijuan; Liu, Yang; Qu, Jiuhui; Li, Jinghong

    2015-01-01

    The development of low cost, durable and efficient nanocatalysts to substitute expensive and rare noble metals (e.g. Pt, Au and Pd) in overcoming the sluggish kinetic process of the oxygen reduction reaction (ORR) is essential to satisfy the demand for sustainable energy conversion and storage in the future. Graphene based transition metal oxide nanocomposites have extensively been proven to be a type of promising highly efficient and economic nanocatalyst for optimizing the ORR to solve the world-wide energy crisis. Synthesized nanocomposites exhibit synergetic advantages and avoid the respective disadvantages. In this feature article, we concentrate on the recent leading works of different categories of introduced transition metal oxides on graphene: from the commonly-used classes (FeOx, MnOx, and CoOx) to some rare and heat-studied issues (TiOx, NiCoOx and Co-MnOx). Moreover, the morphologies of the supported oxides on graphene with various dimensional nanostructures, such as one dimensional nanocrystals, two dimensional nanosheets/nanoplates and some special multidimensional frameworks are further reviewed. The strategies used to synthesize and characterize these well-designed nanocomposites and their superior properties for the ORR compared to the traditional catalysts are carefully summarized. This work aims to highlight the meaning of the multiphase establishment of graphene-based transition metal oxide nanocomposites and its structural-dependent ORR performance and mechanisms.

  13. Influence of Surface Morphology on the Antimicrobial Effect of Transition Metal Oxides in Polymer Surface.

    PubMed

    Oh, Yoo Jin; Hubauer-Brenner, Michael; Hinterdorfer, Peter

    2015-10-01

    In this study, the physical properties of transition metal oxide surfaces were examined using scanning probe microscopic (SPM) techniques for elucidating the antimicrobial activity of molybdenum trioxide (MoO3), tungsten trioxide (WO3), and zinc oxide (ZnO) embedded into the polymers thermoplastic polyurethane (TPU) and polypropylene (PP). We utilized atomic force microscopy (AFM) in the contact imaging mode and its derivative single-pass Kelvin probe force microscopy for investigating samples that were presumably identical in their compositions, but showed different antimicrobial activity in bacterial adhesion tests. Our results revealed that surfaces with larger roughness and higher surface potential variation showed stronger antimicrobial activities compared to smoother and homogeneously charge-distributed surfaces. In addition, capacitance gradient (dC/dZ) measurements were performed to elucidate the antimicrobial activity arising from the different dielectric behavior of the transition metal oxides in this heterogeneous polymer surface. We found that the nano-scale exposure of transition metal oxides on polymer surfaces provided strong antimicrobial effects. Applications arising from our studies will be useful for public and healthcare environments.

  14. Pulsed laser deposition of transition metal oxides for secondary batteries

    SciTech Connect

    Striebel, K.A.; Deng, C.Z.; Cairns, E.J.

    1995-12-31

    Pulsed laser deposition has been used to prepare thin films of several complex metal oxides of significance in secondary batteries from a single stoichiometric target with a substrate temperature of 600 C in the presence of 200 mtorr O{sub 2}. Films of the candidate bifunctional air electrocatalysts, for metal air batteries, La{sub 0.6}Ca{sub 0.4}CoO{sub 3}, La{sub 0.6}Sr{sub 0.4}CoO{sub 3}, La{sub 0.6}Ca{sub 0.4}MnO{sub 3} and La{sub 0.6}Sr{sub 0.4}MnO{sub 3} were prepared on glassy carbon substrates. Glassy carbon was found to either erode during the ablation process (with the cobaltates) or cause film cracking after deposition because of its extremely low coefficient of thermal expansion. The use of stainless steel substrates yielded 0.3 {micro}m-thick dense films of La{sub 0.6}Ca{sub 0.4}CoO{sub 3} and La{sub 0.6}Ca{sub 0.4}MnO{sub 3} which were suitable for electrochemical measurements in concentrated alkaline electrolytes. LiMn{sub 2}O{sub 4} and LiCoO{sub 2} films were prepared at thickness` of 0.3 {micro}m and 1.5 {micro}m. The 0.3 {micro}m-thick films delivered 176 mC/cm{sup 2}-{micro}m and 323 mC/cm{sup 2} for LiMn{sub 2}O{sub 4} and LiCoO{sub 2}, respectively, in 1 M LiClO{sub 4}/PC.

  15. Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

    PubMed Central

    Chen, Hongjun

    2014-01-01

    Summary To better utilize the sunlight for efficient solar energy conversion, the research on visible-light active photocatalysts has recently attracted a lot of interest. The photosensitization of transition metal oxides is a promising approach for achieving effective visible-light photocatalysis. This review article primarily discusses the recent progress in the realm of a variety of nanostructured photosensitizers such as quantum dots, plasmonic metal nanostructures, and carbon nanostructures for coupling with wide-bandgap transition metal oxides to design better visible-light active photocatalysts. The underlying mechanisms of the composite photocatalysts, e.g., the light-induced charge separation and the subsequent visible-light photocatalytic reaction processes in environmental remediation and solar fuel generation fields, are also introduced. A brief outlook on the nanostructure photosensitization is also given. PMID:24991507

  16. Transition-metal-free direct alkylation of aryl tetrazoles via intermolecular oxidative C-N formation.

    PubMed

    Wang, Liang; Zhu, Kaiqiang; Chen, Qun; He, Mingyang

    2014-12-05

    A transition-metal-free synthetic approach for constructing alkylated aryl tetrazoles has been developed using n-Bu4NI as the catalyst and t-BuOOH as the oxidant. It involves the direct C-N bond formation through sp(3) C-H activation. A wide range of benzylic C-H substrates (or alkyl ethers) and aryl tetrazoles undergo this reaction smoothly to deliver the corresponding products in good yields.

  17. Evaluation of transition metal oxide as carrier-selective contacts for silicon heterojunction solar cells

    SciTech Connect

    Ding, L.; Boccard, Matthieu; Holman, Zachary; Bertoni, M.

    2015-04-06

    "Reducing light absorption in the non-active solar cell layers, while enabling the extraction of the photogenerated minority carriers at quasi-Fermi levels are two key factors to improve current generation and voltage, and therefore efficiency of silicon heterojunction solar devices. To address these two critical aspects, transition metal oxide materials have been proposed as alternative to the n- and p-type amorphous silicon used as electron and hole selective contacts, respectively. Indeed, transition metal oxides such as molybdenum oxide, titanium oxide, nickel oxide or tungsten oxide combine a wide band gap typically over 3 eV with a band structure and theoretical band alignment with silicon that results in high transparency to the solar spectrum and in selectivity for the transport of only one carrier type. Improving carrier extraction or injection using transition metal oxide has been a topic of investigation in the field of organic solar cells and organic LEDs; from these pioneering works a lot of knowledge has been gained on materials properties, ways to control these during synthesis and deposition, and their impact on device performance. Recently, the transfer of some of this knowledge to silicon solar cells and the successful application of some metal oxide to contact heterojunction devices have gained much attention. In this contribution, we investigate the suitability of various transition metal oxide films (molybdenum oxide, titanium oxide, and tungsten oxide) deposited either by thermal evaporation or sputtering as transparent hole or electron selective transport layer for silicon solar cells. In addition to systematically characterize their optical and structural properties, we use photoemission spectroscopy to relate compound stoichiometry to band structure and characterize band alignment to silicon. The direct silicon/metal oxide interface is further analyzed by quasi-steady state photoconductance decay method to assess the quality of surface

  18. Magnetic moment and magnetic anisotropy of linear and zigzag 4d and 5d transition metal nanowires: First-principles calculations

    NASA Astrophysics Data System (ADS)

    Tung, J. C.; Guo, G. Y.

    2010-03-01

    An extensive ab initio study of the physical properties of both linear and zigzag atomic chains of all 4d and 5d transition metals (TMs) within the generalized gradient approximation by using the accurate projector-augmented wave method, has been carried out. The atomic structures of equilibrium and metastable states were theoretically determined. All the TM linear chains are found to be unstable against the corresponding zigzag structures. All the TM chains, except Nb, Ag, and La, have a stable (or metastable) magnetic state in either the linear or zigzag or both structures. Magnetic states appear also in the sufficiently stretched Nb and La linear chains and in the largely compressed Y and La chains. The spin magnetic moments in the Mo, Tc, Ru, Rh, W, Re chains could be large (≥1.0μB/atom) . Structural transformation from the linear to zigzag chains could suppress the magnetism already in the linear chain, induce the magnetism in the zigzag structure, and also cause a change in the magnetic state (ferromagnetic to antiferromagnetic or vice verse). The calculations including the spin-orbit coupling reveal that the orbital moments in the Zr, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir, and Pt chains could be rather large (≥0.1μB/atom) . Importantly, large magnetic anisotropy energy (≥1.0meV/atom) is found in most of the magnetic TM chains, suggesting that these nanowires could have fascinating applications in ultrahigh-density magnetic memories and hard disks. In particular, giant magnetic anisotropy energy (≥10.0meV/atom) could appear in the Ru, Re, Rh, and Ir chains. Furthermore, the magnetic anisotropy energy in several elongated linear chains could be as large as 40.0 meV/atom. A spin-reorientation transition occurs in the Ru, Ir, Ta, Zr, La, Ta, and Ir linear chains when they are elongated. Remarkably, all the 5d as well as Tc and Pd chains show the colossal magnetic anisotropy (i.e., it is impossible to rotate magnetization into certain directions

  19. First-principles exploration of ferromagnetic and ferroelectric double-perovskite transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Uratani, Y.; Shishidou, T.; Ishii, F.; Oguchi, T.

    2006-08-01

    Possible ferromagnetic and ferroelectric phases are explored for bismuth transition-metal oxides with double-perovskite structure A2BB‧O6 on the basis of first-principles calculations within the local spin-density approximation (LSDA) and generalized gradient approximation (GGA). It is found that a lattice instability of the cubic to a non-centrosymmetric phase always happens in the all cases of lead and bismuth perovskite oxides with the 3d transition-metal ions at the B site. Placing bismuth ion at the A site in the double-perovskite structure, several sets of the 3d transition-metal ions are selected according to their total valence sum and the Goodenough-Kanamori rule for the superexchange coupling. Ferromagnetic solutions are actually obtained both within LSDA and GGA for Bi2CrFeO6, Bi2MnNiO6 and Bi2CrCuO6. For non-centrosymmetric monoclinic Bi2MnNiO6, the ferromagnetic and ferroelectric phase has the spin magnetic moment of 5μB and the electric polarization of 28 μC/cm2.

  20. Effect of UV exposure on photochromic glasses doped with transition metal oxides

    NASA Astrophysics Data System (ADS)

    El-Zaiat, S. Y.; Medhat, M.; Omar, Mona F.; Shirif, Marwa A.

    2016-07-01

    Silver halide photochromic glasses doped with one of the transition metal oxides, (Ti O2) , (CoO) ,(Cr2 O3) are prepared using the melt quench technique. Glass samples are exposed to a UV source for 20 min. Spectral reflectance and transmittance at normal incidence of the prepared glasses are recorded before and after UV exposure with a double beam spectrophotometer in the spectral range 200-2500 nm. Dispersion parameters such as: single oscillator energy, dispersion energy and Abbe's number are deduced and compared. Absorption dispersion parameters, like optical energy gap for direct and indirect transitions, Urbach energy and steepness parameter, are deduced for the different glass prepared. Reflection loss, molar refractivity and electronic polarizability are deduced and compared. The effect of UV light exposure of these glasses on transmittance, reflectance, the linear and the predicted nonlinear optical parameters are investigated and discussed for the three transition metals. Nonlinear parameters increase in the three glass samples after UV exposure.

  1. VUV photo-oxidation of gaseous benzene combined with ozone-assisted catalytic oxidation: Effect on transition metal catalyst

    NASA Astrophysics Data System (ADS)

    Huang, Haibao; Lu, Haoxian; Zhan, Yujie; Liu, Gaoyuan; Feng, Qiuyu; Huang, Huiling; Wu, Muyan; Ye, Xinguo

    2017-01-01

    Volatile organic compounds (VOCs) cause the major air pollution concern. In this study, a series of ZSM-5 supported transition metals were prepared by impregnation method. They were combined with vacuum UV (VUV) photo-oxidation in a continuous-flow packed-bed reactor and used for the degradation of benzene, a typical toxic VOCs. Compared with VUV photo-oxidation alone, the introduction of catalysts can greatly enhance benzene oxidation under the help of O3, the by-products from VUV irradiation, via ozone-assisted catalytic oxidation (OZCO). The catalytic activity of transition metals towards benzene oxidation followed the order: Mn > Co > Cu > Ni > Fe. Mn achieved the best catalytic activity due to the strongest capability for O3 catalytic decomposition and utilization. Benzene and O3 removal efficiency reached as high as 97% and 100% after 360 min, respectively. O3 was catalytically decomposed, generating highly reactive oxidants such as rad OH and rad O for benzene oxidation.

  2. Quantum Material Properties of 4d and 5d Transition Metal Oxides and Potential Applications

    DTIC Science & Technology

    2015-05-26

    structure leads to clear deviation from the metallic behavior seen in the 4H structure . The Nernst effect signal in the normal state of Sr2RuO4 is large...dimensional character in the 9R structure leads to clear deviation from the metallic behavior seen in the 4H structure . Measurements on the Nernst...deviation from the metallic behavior seen in the 4H structure . The Nernst effect signal in the normal state of Sr2RuO4 is large which decreases linearly as

  3. Structure-Reactivity Relationships in Multi-Component Transition Metal Oxide Catalysts FINAL Report

    SciTech Connect

    Altman, Eric I.

    2015-10-06

    The focus of the project was on developing an atomic-level understanding of how transition metal oxide catalysts function. Over the course of several renewals the specific emphases shifted from understanding how local structure and oxidation state affect how molecules adsorb and react on the surfaces of binary oxide crystals to more complex systems where interactions between different transition metal oxide cations in an oxide catalyst can affect reactivity, and finally to the impact of cluster size on oxide stability and reactivity. Hallmarks of the work were the use of epitaxial growth methods to create surfaces relevant to catalysis yet tractable for fundamental surface science approaches, and the use of scanning tunneling microscopy to follow structural changes induced by reactions and to pinpoint adsorption sites. Key early findings included the identification of oxidation and reduction mechanisms on a tungsten oxide catalyst surface that determine the sites available for reaction, identification of C-O bond cleavage as the rate limiting step in alcohol dehydration reactions on the tungsten oxide surface, and demonstration that reduction does not change the favored reaction pathway but rather eases C-O bond cleavage and thus reduces the reaction barrier. Subsequently, a new reconstruction on the anatase phase of TiO2 relevant to catalysis was discovered and shown to create sites with distinct reactivity compared to other TiO2 surfaces. Building on this work on anatase, the mechanism by which TiO2 enhances the reactivity of vanadium oxide layers was characterized and it was found that the TiO2 substrate can force thin vanadia layers to adopt structures they would not ordinarily form in the bulk which in turn creates differences in reactivity between supported layers and bulk samples. From there, the work progressed to studying well-defined ternary oxides where synergistic effects between the two cations can induce

  4. First principles studies of the dependence of magnetism on the crystal phase in 4d and 5d late transition metals

    NASA Astrophysics Data System (ADS)

    Hüger, E.; Osuch, K.

    2005-03-01

    We investigate the possibility of inducing ferromagnetic order in 4d and 5d late transition metals through crystal symmetry change. First principles, self-consistent density functional theory calculations, with spin-orbit coupling included, performed at 0 K show that ferromagnetism occurs in the bulk of Rh and Pd at the optimum lattice constant if Rh is in the bcc and Pd in the hcp/dhcp phase. The ferromagnetic order originates in the d-band occupancy of Rh or Pd which locates the Fermi energy at the top of the highest peak of the respective (paramagnetic) density of states induced by the bcc or hcp/dhcp structure. This peak in the density of states is caused by flat bands which lie at the surface of the respective Brillouin zone. For a bcc crystal these flat bands have the eg character and are positioned at the surface of the bcc Brillouin zone along the N-P line. The origin of the flatness of the bands was found to be the translation symmetry of the cubic lattice which causes the bands with the eg character to be narrow along the k-lines whose k-vector directions are furthest off the directions to which the orbitals of the eg symmetry point. Due to the d-band occupancy of Rh these flat bands lie in the paramagnetic state at the Fermi energy, whereas in the ferromagnetic state they exhibit the largest energetic split. This indicates that a smaller degree of orbital overlap narrows electronic bands enhancing the tendency of the system for ferromagnetic band split. For the hcp/dhcp structure the states contributing to the high density of para-magnetic states at the Fermi level of Pd lie in the vicinity of the M-L line of the hcp Brillouin zone boundary, which possesses a high number of symmetry (M and L) points. Moreover, the M-L line is aligned with the stacking sequence direction ([0001]) which is furthest off the densest-packed atomic chain direction of an hcp-crystal and, consequently, the weakest-bond direction in the crystal. This makes the narrow bands along

  5. Non-volatile memory based on transition metal perovskite oxide resistance switching

    NASA Astrophysics Data System (ADS)

    Nian, Yibo

    Driven by the non-volatile memory market looking for new advanced materials, this dissertation focuses on the study of non-volatile resistive random access memory (RRAM) based on transition metal perovskite oxides. Pr0.7Ca0.3MnO3 (PCMO), one of the representative materials in this family, has demonstrated a large range of resistance change when short electrical pulses with different polarity are applied. Such electrical-pulse-induced resistance (EPIR), with attractive features such as fast response, low power, high-density and non-volatility, makes PCMO and related materials promising candidates for non-volatile RRAM application. The objective of this work is to investigate, optimize and understand the properties of this universal EPIR behavior in transition metal perovskite oxide, represented by PCMO thin film devices. The research work includes fabrication of PCMO thin film devices, characterization of these EPIR devices as non-volatile memories, and investigation of their resistive switching mechanisms. The functionality of this perovskite oxide RRAM, including pulse magnitude/width dependence, power consumption, retention, endurance and radiation-hardness has been investigated. By studying the "shuttle tail" in hysteresis switching loops of oxygen deficient devices, a diffusion model with oxygen ions/vacancies as active agents at the metal/oxide interface is proposed for the non-volatile resistance switching effect in transition metal perovskite oxide thin films. The change of EPIR switching behavior after oxygen/argon ion implantation also shows experiment support for the proposed model. Furthermore, the universality, scalability and comparison with other non-volatile memories are discussed for future application.

  6. Understanding the NMR shifts in paramagnetic transition metal oxides using density functional theory calculations

    NASA Astrophysics Data System (ADS)

    Carlier, D.; Ménétrier, M.; Grey, C. P.; Delmas, C.; Ceder, G.

    2003-05-01

    The 6,7Li MAS NMR spectra of lithium ions in paramagnetic host materials are extremely sensitive to number and nature of the paramagnetic cations in the Li local environments and large shifts (Fermi contact shifts) are often observed. The work presented in this paper aims to provide a rational basis for the interpretation of the 6,7Li NMR shifts, as a function of the lithium local environment and electronic configuration of the transition metal ions. We focus on the layered rocksalts often found for LiMO2 compounds and on materials that are isostructural with the K2NiF4 structure. In order to understand the spin-density transfer mechanism from the transition metal ion to the lithium nucleus, which gives rise to the hyperfine shifts observed by NMR, we have performed density functional theory (DFT) calculations in the generalized gradient approximation. For each compound, we calculate the spin densities values on the transition metal, oxygen and lithium ions and map the spin density in the M-O-Li plane. Predictions of the calculations are in good agreement with several experimental results. We show that DFT calculations are a useful tool with which to interpret the observed paramagnetic shifts in layered oxides and to understand the major spin-density transfer processes. This information should help us to predict the magnitudes and signs of the Li hyperfine shifts for different Li local environments and t2g vs eg electrons in other compounds.

  7. Transition metal oxides deposited on rhodium and platinum: Surface chemistry and catalysis

    SciTech Connect

    Boffa, Alexander Bowman

    1994-07-01

    The surface chemistry and catalytic reactivity of transition metal oxides deposited on Rh and Pt substrates has been examined in order to establish the role of oxide-metal interactions in influencing catalytic activity. The oxides investigated included titanium oxide (TiOx), vanadium oxide (VOx), iron oxide (FeOx), zirconium oxide (ZrOx), niobium oxide (NbOx), tantalum oxide (TaOx), and tungsten oxide (WOx). The techniques used to characterize the sample included AES, XPS, LEED, TPD, ISS, and STM. After characterization of the surface in UHV, the sample was enclosed in an atmospheric reaction cell to measure the influence of the oxide deposits on the catalytic activity of the pure metal for CO and CO2 hydrogenation. The oxide deposits were found to strongly enhance the reactivity of the Rh foil. The rates of methane formation were promoted by up to 15 fold with the maximum in rate enhancement occurring at oxide coverages of approximately 0.5 ML. TiOx TaOx, and NbOx were the most effective promoters and were stable in the highest oxidation states during both reactions (compared to VOx, WOx, and FeOx). The trend in promoter effectiveness was attributed to the direct relationship between oxidation state and Lewis acidity. Bonding at the metal oxide/metal interface between the oxygen end of adsorbed CO and the Lewis acidic oxide was postulated to facilitate C-O bond dissociation and subsequent hydrogenation. 192 refs.

  8. Scalable salt-templated synthesis of two-dimensional transition metal oxides

    PubMed Central

    Xiao, Xu; Song, Huaibing; Lin, Shizhe; Zhou, Ying; Zhan, Xiaojun; Hu, Zhimi; Zhang, Qi; Sun, Jiyu; Yang, Bo; Li, Tianqi; Jiao, Liying; Zhou, Jun; Tang, Jiang; Gogotsi, Yury

    2016-01-01

    Two-dimensional atomic crystals, such as two-dimensional oxides, have attracted much attention in energy storage because nearly all of the atoms can be exposed to the electrolyte and involved in redox reactions. However, current strategies are largely limited to intrinsically layered compounds. Here we report a general strategy that uses the surfaces of water-soluble salt crystals as growth templates and is applicable to not only layered compounds but also various transition metal oxides, such as hexagonal-MoO3, MoO2, MnO and hexagonal-WO3. The planar growth is hypothesized to occur via a match between the crystal lattices of the salt and the growing oxide. Restacked two-dimensional hexagonal-MoO3 exhibits high pseudocapacitive performances (for example, 300 F cm−3 in an Al2(SO4)3 electrolyte). The synthesis of various two-dimensional transition metal oxides and the demonstration of high capacitance are expected to enable fundamental studies of dimensionality effects on their properties and facilitate their use in energy storage and other applications. PMID:27103200

  9. Development of new transition metal oxide catalysts for the destruction of PCDD/Fs.

    PubMed

    Yu, Ming-Feng; Li, Wen-Wei; Li, Xiao-Dong; Lin, Xiao-Qing; Chen, Tong; Yan, Jian-Hua

    2016-08-01

    Various transition metal oxide and vanadium-containing multi-metallic oxide catalysts were developed for the destruction of PCDD/Fs (polychlorinated dibenzo-p-dioxins and furans). A stable PCDD/Fs generating system was installed to support the catalytic destruction tests in this study. Nano-titania supported vanadium catalyst (VOx/TiO2) showed the highest activity, followed by CeOx, MnOx, WOx and finally MoOx. Multi-metallic oxide catalysts, prepared by doping WOx, MoOx, MnOx and CeOx into VOx/TiO2 catalysts, showed different activities on the decomposition of PCDD/Fs. The highest destruction efficiency of 92.5% was observed from the destruction test over VOxCeOx/TiO2 catalyst. However, the addition of WOx and MoOx even played a negative role in multi-metallic VOx/TiO2 catalysts. Characterizations of transition metal oxides and multi-metallic VOx/TiO2 catalysts were also investigated with XRD and TPR. After the catalysts were used, the conversion from high valent metals to low valence states was observed by XPS.

  10. Reduction of aqueous transition metal species on the surfaces of Fe(II)-containing oxides

    USGS Publications Warehouse

    White, A.F.; Peterson, M.L.

    1996-01-01

    Experimental studies demonstrate that structural Fe(II) in magnetite and ilmenite heterogeneously reduce aqueous ferric, cupric, vanadate, and chromate ions at the oxide surfaces over a pH range of 1-7 at 25??C. For an aqueous transition metal m, such reactions are 3[Fe2+Fe3+2]O4(magnetite) + 2/nmz ??? 4[Fe3+2]O3(maghemite) + Fe2+ + 2/nmz-n and 3[Fe2+Ti]O3(ilmenite) + 2/nmz ??? Fe3+2Ti3O9(pseudorutile) + Fe2+ + 2/nmz-n, where z is the valance state and n is the charge transfer number. The half cell potential range for solid state oxidation [Fe(II)] ??? [Fe(III)] is -0.34 to -0.65 V, making structural Fe(II) a stronger reducing agent than aqueous Fe2+ (-0.77 V). Reduction rates for aqueous metal species are linear with time (up to 36 h), decrease with pH, and have rate constants between 0.1 and 3.3 ?? 10-10 mol m-2 s-1. Iron is released to solution both from the above reactions and from dissolution of the oxide surface. In the presence of chromate, Fe2+ is oxidized homogeneously in solution to Fe3+. X-ray photoelectron spectroscopy (XPS) denotes a Fe(III) oxide surface containing reduced Cr(III) and V(IV) species. Magnetite and ilmenite electrode potentials are insensitive to increases in divalent transition metals including Zn(II), Co(II), Mn(II), and Ni(II) and reduced V(IV) and Cr(III) but exhibit a log-linear concentration-potential response to Fe(III) and Cu(II). Complex positive electrode responses occur with increasing Cr(VI) and V(V) concentrations. Potential dynamic scans indicate that the high oxidation potential of dichromate is capable of suppressing the cathodic reductive dissolution of magnetite. Oxide electrode potentials are determined by the Fe(II)/Fe(III) composition of the oxide surface and respond to aqueous ion potentials which accelerate this oxidation process. Natural magnetite sands weathered under anoxic conditions are electrochemically reactive as demonstrated by rapid chromate reduction and the release of aqueous Fe(III) to experimental

  11. Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides.

    PubMed

    Kuśtrowski, Piotr; Chmielarz, Lucjan; Dziembaj, Roman; Cool, Pegie; Vansant, Etienne F

    2005-01-20

    The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.

  12. Strain induced electronic structure changes in magnetic transition metal oxides thin films

    SciTech Connect

    van der Laan, G.; Chopdekar, R.V.; Suzuki, Y.; Arenholz, E.

    2010-07-08

    We show that the angular dependence of x-ray magnetic circular dichroism (XMCD) is strongly sensitive to strain-induced electronic structure changes in magnetic transition metal oxides. We observe a pronounced dependence of the XMCD spectral shape on the experimental geometry as well as nonvanishing XMCD with distinct spectral features in transverse geometry in compressively strained MnCr{sub 2}O{sub 4} films. The angular dependent XMCD can be described as a sum over an isotropic and anisotropic contribution, the latter linearly proportional to the axial distortion due to strain. The XMCD spectra are well reproduced by atomic multiplet calculations.

  13. Generation of highly N-type, defect passivated transition metal oxides using plasma fluorine insertion

    SciTech Connect

    Baker, L. Robert; Seo, Hyungtak; Hervier, Antoine; Somorjai, Gabor A.

    2016-04-12

    A new composition of matter is disclosed wherein oxygen vacancies in a semiconducting transition metal oxide such as titanium dioxide are filled with a halogen such as Fluorine, whereby the conductivity of the composition is greatly enhanced, while at the same time the chemical stability of the composition is greatly improved. Stoichiometric titanium dioxide having less than 3 % oxygen vacancies is subject to fluorine insertion such that oxygen vacancies are filled, limited amounts of fluorine replace additional oxygen atoms and fluorine interstitially inserts into the body of the TiO.sub.2 composition.

  14. Mesoscale Charge-Ordering in Transition Metal Oxides: Formation and Signatures

    SciTech Connect

    Bishop, A.R.; Yu, Z.G.

    1998-06-01

    The authors briefly outline the value of an inhomogeneous (unrestricted) Hartree-Fock plus Random Phase approach for understanding the types and properties of mesoscopic patterns of localized small polarons in transition metal oxides. Using a multiband Peierls-Hubbard model for a hole-doped CuO{sub 2} layer as an illustrative example, they demonstrate the appearance of correlated high-energy (electronic) and low-energy (localized phonon and spin-wave) signatures of various vertical, diagonal, metal-centered, and oxygen-centered mesoscopic stripe patterns of localized holes (small polarons).

  15. Resonant x-ray scattering in 3d-transition-metal oxides: Anisotropy and charge orderings

    NASA Astrophysics Data System (ADS)

    Subías, G.; García, J.; Blasco, J.; Herrero-Martín, J.; Sánchez, M. C.

    2009-11-01

    The structural, magnetic and electronic properties of transition metal oxides reflect in atomic charge, spin and orbital degrees of freedom. Resonant x-ray scattering (RXS) allows us to perform an accurate investigation of all these electronic degrees. RXS combines high-Q resolution x-ray diffraction with the properties of the resonance providing information similar to that obtained by atomic spectroscopy (element selectivity and a large enhancement of scattering amplitude for this particular element and sensitivity to the symmetry of the electronic levels through the multipole electric transitions). Since electronic states are coupled to the local symmetry, RXS reveals the occurrence of symmetry breaking effects such as lattice distortions, onset of electronic orbital ordering or ordering of electronic charge distributions. We shall discuss the strength of RXS at the K absorption edge of 3d transition-metal oxides by describing various applications in the observation of local anisotropy and charge disproportionation. Examples of these resonant effects are (I) charge ordering transitions in manganites, Fe3O4 and ferrites and (II) forbidden reflections and anisotropy in Mn3+ perovskites, spinel ferrites and cobalt oxides. In all the studied cases, the electronic (charge and/or anisotropy) orderings are determined by the structural distortions.

  16. Lithium Diffusion in Lithium-Transition-Metal Oxides Detected by μ+SR

    NASA Astrophysics Data System (ADS)

    Sugiyama, Jun; Mukai, Kazuhiko; Nozaki, Hiroshi; Harada, Masashi; Kamazawa, Kazuya; YutakaIkedo; Månsson, Martin; Ofer, Oren; Ansaldo, Eduardo J.; Brewer, Jess H.; Chow, Kim H.; IsaoWatanabe; Miyake, Yasuhiro; Ohzuku, Tsutomu

    Diffusion of Li+ ionsin solidsisa basic principle behindthe operationof Li-ion batteries. Suchdiffusive behavior is represented by the diffusion equation (Fick's law), J = -D × δϕ/δx, where J is the diffusion flux, D is the self diffusion coeffcient, ϕ is the concentration, and x is the position. Although D of Li+ ions(DLi)in solids is usually evaluatedby 7Li-NMR, diffculties arise for materials that contain magnetic ions. This is because the magnetic ions contribute additional spin-lattice relaxation processes thatis considerably larger than the1/T1 expected from only Li diffusion[1-3]. This implies that 7Li-NMRprovidesa rough estimateof DLi for the positive electrode materials of Li-ion batteries, which include transition metal ions in order to compensate charge neutrality during a Li+ intercala-tion/deintercalation reaction. This is an unsatisfactory situation since DLi is one of the primary parameters that govern the charge/discharge rate of a Li-ion battery. We have, therefore, attempted to measure DLi for lithium-transition-metal-oxides with muon-spin relaxation (μ+SR) since 2005 [4-6]. Muons do not feel fluctuating magnetic moments at high T, but instead sense the change in nuclear dipole field due to Li diffusion. Even if magnetic moments still affect the muon-spin depolarization rate, such aneffectis, in principle, distinguishablefromthatof nucleardipole fields.In particular,aweak longitudinal field can be applied that decouples the magnetic and nuclear dipole interactions [7,8]. Here, we wish to summarize our μ+SR study on the lithium-transition-metal-oxides, LixCoO2, LiNiO2, and LiCrO2.

  17. Synthesis of transition metal nitride by nitridation of metastable oxide precursor

    SciTech Connect

    Wang, Huamin; Wu, Zijie; Kong, Jing; Wang, Zhiqiang; Zhang, Minghui

    2012-10-15

    Metastable transition metal oxides were used as precursors to synthesize transition metal nitrides at low temperature. Amorphous MoO{sub 2} was prepared by reduction of (NH{sub 4}){sub 6}Mo{sub 7}O{sub 24} solution with hydrazine. As-synthesized amorphous MoO{sub 2} was transformed into fcc {gamma}-Mo{sub 2}N at 400 Degree-Sign C and then into hexagonal {delta}-MoN by further increasing the temperature to 600 Degree-Sign C under a NH{sub 3} flow. The nitridation temperature employed here is much lower than that employed in nitridation of crystalline materials, and the amorphous materials underwent a unique nitridation process. Besides this, the bimetallic nitride Ni{sub 2}Mo{sub 3}N was also synthesized by nitridating amorphous bimetallic precursor. These results suggested that the nitridation of amorphous precursor possessed potential to be a general method for synthesizing many interstitial metallic compounds, such as nitrides and carbides at low temperature. - graphical abstract: Amorphous oxide was used as new precursor to prepare nitride at low temperature. Pure {gamma}-Mo{sub 2}N and {delta}-MoN were obtained at 400 Degree-Sign C and at 600 Degree-Sign C, respectively. Highlights: Black-Right-Pointing-Pointer We bring out a new method to synthesize transition metal nitrides at low temperature. Black-Right-Pointing-Pointer Both mono- and bimetallic molybdenum nitrides were synthesized at a mild condition. Black-Right-Pointing-Pointer The formation of two different molybdenum nitrides {gamma}-Mo{sub 2}N and {delta}-MoN can be controlled from the same metastable precursor. Black-Right-Pointing-Pointer The nitridation temperature was much lower than that reported from crystalline precursors. Black-Right-Pointing-Pointer The metastable precursor had different reaction process in comparison with crystalline precursor.

  18. Multistep soft chemistry method for valence reduction in transition metal oxides with triangular (CdI2-type) layers.

    PubMed

    Blakely, Colin K; Bruno, Shaun R; Poltavets, Viktor V

    2014-03-14

    Transition metal (M) oxides with MO2 triangular layers demonstrate a variety of physical properties depending on the metal oxidation states. In the known compounds, metal oxidation states are limited to either 3+ or mixed-valent 3+/4+. A multistep soft chemistry synthetic route for novel phases with M(2+/3+)O2 triangular layers is reported.

  19. Self-Organized Growth, Structure, and Magnetism of Monatomic Transition-Metal Oxide Chains

    NASA Astrophysics Data System (ADS)

    Ferstl, Pascal; Hammer, Lutz; Sobel, Christopher; Gubo, Matthias; Heinz, Klaus; Schneider, M. Alexander; Mittendorfer, Florian; Redinger, Josef

    2016-07-01

    We report on the self-organized growth of monatomic transition-metal oxide chains of (3 ×1 ) periodicity and unusual M O2 stoichiometry (M =Ni , Co, Fe, Mn) on Ir(100). We analyze their structural and magnetic properties by means of quantitative LEED, STM, and density functional theory (DFT) calculations. LEED analyses reveal a fascinating common atomic structure in which the transition-metal atoms sit above a missing-row structure of the surface and are coupled to the substrate only via oxygen atoms. This structure is confirmed by DFT calculations with structural parameters deviating by less than 1.7 pm. The DFT calculations predict that the NiO2 chains are nonmagnetic, CoO2 chains are ferromagnetic, while FeO2 and MnO2 are antiferromagnetic. All structures show only weak magnetic interchain coupling. Further, we demonstrate the growth of oxide chains of binary alloys of Co and Ni or Fe on Ir(100), which allows us to produce well-controlled ensembles of ferromagnetic chains of different lengths separated by nonmagnetic or antiferromagnetic segments.

  20. Variation of Some Physical Properties of Brownmillerite Doped with a Transition Metal Oxide

    NASA Astrophysics Data System (ADS)

    Hassaan, M. Y.; Ebrahim, F. M.; Salah, S. H.

    2004-12-01

    Cement clinker is the main component of Portland cement. It is composed of four main phases. One of them is the brownmillerite or the ferrite phase of cement clinker. It is prepared according to the formula (4CaO)(Al2O3)(Fe2O3)1-x (M) x , where M represents transition metal oxides (TMO): TiO2, Cr2O3, Mn2O3 and WO3, where x=1, 2, 3, 4 and 5 mol%. Each mixture was fired at 1300°C for 30 minutes in a platinum crucible. The samples were pulverized for Mössbauer spectroscopy, X-ray diffraction and a.c. conductivity measurements. A shift in the position of the characterized peaks of pure brownmillerite appears in the X-ray diffraction patterns of brownmillerite doped with a transition metal oxide. The a.c. conductivity showed a maximum value for the samples containing 3 mol% TiO2, Cr2O3 and Mn2O3, and 2 mol% WO3. The Mössbauer parameters for the sample containing 5 mol% M showed a gradual increase in the isomer shift values. The number of electrons in d-orbital for the doped transition atoms, as the nearest neighbor atoms increased from 2 to 5 electrons. The hyperfine magnetic field at Fe3+ (Oh) iron nucleus decreases with increasing M content. This may be due to the decrease of the particle size of brownmillerite.

  1. Transition metal-modified zinc oxides for UV and visible light photocatalysis.

    PubMed

    Bloh, J Z; Dillert, R; Bahnemann, D W

    2012-11-01

    In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1 at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1 at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.

  2. Stoichiometry determined exchange interactions in amorphous ternary transition metal oxides: Theory and experiment

    SciTech Connect

    Hu, Shu-jun; Yan, Shi-shen Zhang, Yun-peng; Zhao, Ming-wen; Kang, Shi-shou; Mei, Liang-mo

    2014-07-28

    Amorphous transition metal oxides exhibit exotic transport and magnetic properties, while the absence of periodic structure has long been a major obstacle for the understanding of their electronic structure and exchange interaction. In this paper, we have formulated a theoretical approach, which combines the melt-quench approach and the spin dynamic Monte-Carlo simulations, and based on it, we explored amorphous Co{sub 0.5}Zn{sub 0.5}O{sub 1−y} ternary transition metal oxides. Our theoretical results reveal that the microstructure, the magnetic properties, and the exchange interactions of Co{sub 0.5}Zn{sub 0.5}O{sub 1−y} are strongly determined by the oxygen stoichiometry. In the oxygen-deficient sample (y > 0), we have observed the long-range ferromagnetic spin ordering which is associated with the non-stoichiometric cobalt-rich region rather than metallic clusters. On the other hand, the microstructure of stoichiometric sample takes the form of continuous random networks, and no long-range ferromagnetism has been observed in it. Magnetization characterization of experimental synthesized Co{sub 0.61}Zn{sub 0.39}O{sub 1−y} films verifies the relation between the spin ordering and the oxygen stoichiometry. Furthermore, the temperature dependence of electrical transport shows a typical feature of semiconductors, in agreement with our theoretical results.

  3. Magnetic collapse and the behavior of transition metal oxides at high pressure

    NASA Astrophysics Data System (ADS)

    Leonov, I.; Pourovskii, L.; Georges, A.; Abrikosov, I. A.

    2016-10-01

    We report a detail theoretical study of the electronic structure and phase stability of transition metal oxides MnO, FeO, CoO, and NiO in their paramagnetic cubic B 1 structure by employing dynamical mean-field theory of correlated electrons combined with ab initio band-structure methods. Our calculations reveal that under pressure these materials exhibit a Mott insulator-metal transition (IMT) which is accompanied by a simultaneous collapse of local magnetic moments and lattice volume, implying a complex interplay between chemical bonding and electronic correlations. Moreover, our results for the transition pressure show a monotonous decrease from ˜145 to 40 GPa, upon moving from MnO to CoO. In contrast to that, in NiO, magnetic collapse is found to occur at a remarkably higher pressure of ˜429 GPa. We provide a unified picture of such a behavior and suggest that it is primarily a localized to itinerant moment behavior transition at the IMT that gives rise to magnetic collapse in transition metal oxides.

  4. Methods to protect and recover work function of air exposed transition metal oxide thin films

    NASA Astrophysics Data System (ADS)

    Irfan, Irfan; Wang, Chenggong; Turinske, Alexander J.; Gao, Yongli

    2012-09-01

    Insertion of high work function (WF) transition metal oxide (TMO) layers between the anode and the hole transport layer is established to substantially enhance the performance of organic light emitting diodes (OLED). The high WF of transition metal oxide layer has been demonstrated to be the most crucial for the enhancement. The WF of a TMO layer decreases substantially with air exposure, and noticeably by the ambient even inside a low vacuum system. In the present work we discuss various methods to protect and recover the high WF after a TMO thin film has been exposed to air. We report covering a thin organic layer on top of MoOx to protect the high work function. We found that a thin layer of 1-2 nm organic layer was sufficient to protect the work function of MoOx thin film underneath. We further report methods to recover already decreased TMO WF due to air exposure. We performed oxygen plasma cleaning of air exposed MoOx film and found out that oxygen plasma could substantially recover the WF of as deposited MoOx film. We also performed annealing of air exposed MoOx film inside an ultra high vacuum system and observed a thin layer of oxygenrich adsorbate layer, which desorbed upon annealing that in turn substantially recovered the MoOx WF. We discuss the vacuum annealing and the effect of resulting surface on the interface energy level alignment.

  5. Synthesis and control of morphology, stoichiometry, and composition of transition metal oxides

    NASA Astrophysics Data System (ADS)

    Brier, Matthew Isaac

    Transition metal oxides (TMOs) are an important class of materials that have found uses in diverse applications, such as heterogeneous catalysts, sensors, and high temperature superconductors, due to their complex surface chemistry and high mobility of lattice oxygen atoms. Point defects such as oxygen and metal atom vacancies significantly perturb the electronic structure of TMOs and profoundly impact their electrical, optical, ferroelectric, photocatalytic, and other functional properties. As a result, significant research is being done to develop synthesis techniques that can produce metal oxides with controllable material properties. In this thesis, the use of hot wire chemical vapor deposition (HWCVD) was studied with the aim of precisely controlling the morphology, stoichiometry, and composition of TMOs. With molybdenum oxide as the model system, the control of morphology and stoichiometry was achieved by modulation of deposition parameters, such as filament power and gas phase composition. The study of HWCVD of MoOx led to the development of phase diagrams for the dependence of morphology and stoichiometry on deposition parameters. The knowledge gained studying the HWCVD of MoOx was then shown to translate to the deposition of other binary metal oxides by using tungsten, nickel, and vanadium metal filaments to synthesize their respective transition metal oxides. Additionally, NiMoO4 was synthesized as a proof-of-concept to show that HWCVD can be used to make ternary oxides. Nitridation of samples in an ammonia atmosphere was conducted to explore the potential for conversion of HWCVD grown TMOs to their respective metal nitrides, which are also reported to have catalytic properties. To examine the quality of TMOs grown by HWCVD, samples were electrochemically tested for their electrochromic properties and photoactivity with respect to splitting of water.

  6. The Oxidation of Sulfur-Containing Compounds Using Heterogeneous Catalysts of Transition Metal Oxides Deposited on the Polymeric Matrix

    NASA Astrophysics Data System (ADS)

    Dinh Vu, Ngo; Dinh Bui, Nhi; Thi Minh, Thao; Thi Thanh Dam, Huong; Thi Tran, Hang

    2016-05-01

    We investigate the activity of heterogeneous catalysts of transition metal oxides deposited on the polymeric matrix in the oxidation of sulfur-containing compounds. It is shown that MnO2-10/CuO-10 has the highest catalytic activity. The physicomechanical properties of polymeric heterogeneous catalysts of transition-metal oxides, including the specific surface area, elongation at break and breaking strength, specific electrical resistance, and volume resistivity were studied by using an Inspekt mini 3 kN universal tensile machine in accordance with TCVN 4509:2006 at a temperature of 20 ± 2°C. Results show that heterogeneous polymeric catalysts were stable under severe reaction conditions. Scanning electron microscopy, and energy-dispersive analysis are used to study the surfaces of the catalysts. Microstructural characterization of the catalysts is performed by using x-ray computed tomography. We demonstrate the potential application of polymeric heterogeneous catalysts of transition-metal oxides in industrial wastewater treatment.

  7. Oxidation of 5'-dGMP, 5'-dGDP, and 5'-dGTP by a platinum(IV) complex.

    PubMed

    Kipouros, Ioannis; Fica-Contreras, Sebastian Matias; Bowe, Gregory Joon Kee; Choi, Sunhee

    2015-12-01

    We previously reported that a Pt(IV) complex, [Pt(IV)(dach)Cl4] [trans-d,l-1,2-diaminocyclohexanetetrachloroplatinum(IV)] binds to the N7 of 5'-dGMP (deoxyguanosine-5'-monophosphate) at a relatively fast rate and oxidizes it to 8-oxo-5'-dGMP. Here, we further studied the kinetics of the oxidation of 5'-dGMP by the Pt(IV) complex. The electron transfer rate constants between 5'-dGMP and Pt(IV) in [H8-5'-dGMP-Pt(IV)] and [D8-5'-dGMP-Pt(IV)] were similar, giving a small value of the kinetic isotope effect (KIE: 1.2 ± 0.2). This small KIE indicates that the deprotonation of H8 in [H8-5'-dGMP-Pt(IV)] is not involved in the rate-determining step in the electron transfer between guanine (G) and Pt(IV). We also studied the reaction of 5'-dGDP (deoxyguanosine-5'-diphosphate) and 5'-dGTP (deoxyguanosine-5'-triphosphate) with the Pt(IV) complex. Our results showed that [Pt(IV)(dach)Cl4] oxidized 5'-dGDP and 5'-dGTP to 8-oxo-5'-dGDP and 8-oxo-5'-dGTP, respectively, by the same mechanism and kinetics as for 5'-dGMP. The Pt(IV) complex binds to N7 followed by a two-electron inner sphere electron transfer from G to Pt(IV). The reaction was catalyzed by Pt(II) and occurred faster at higher pH. The electron transfer was initiated by either an intramolecular nucleophilic attack by any of the phosphate groups or an intermolecular nucleophilic attack by free OH(-) in the solution. The rates of reactions for the three nucleotides followed the order: 5'-dGMP > 5'-dGDP > 5'-dGTP, indicating that the bulkier the phosphate groups are, the slower the reaction is, due to the larger steric hindrance and rotational barrier of the phosphate groups.

  8. Charge generation layers comprising transition metal-oxide/organic interfaces: Electronic structure and charge generation mechanism

    NASA Astrophysics Data System (ADS)

    Meyer, J.; Kröger, M.; Hamwi, S.; Gnam, F.; Riedl, T.; Kowalsky, W.; Kahn, A.

    2010-05-01

    The energetics of an archetype charge generation layer (CGL) architecture comprising of 4,4',4″-tris(N-carbazolyl)triphenylamine (TCTA), tungsten oxide (WO3), and bathophenanthroline (BPhen) n-doped with cesium carbonate (Cs2CO3) are determined by ultraviolet and inverse photoemission spectroscopy. We show that the charge generation process occurs at the interface between the hole-transport material (TCTA) and WO3 and not, as commonly assumed, at the interface between WO3 and the n-doped electron-transport material (BPhen:Cs2CO3). However, the n-doped layer is also essential to the realization of an efficient CGL structure. The charge generation mechanism occurs via electron transfer from the TCTA highest occupied molecular orbital level to the transition metal-oxide conduction band.

  9. LETTER TO THE EDITOR: Efficient photocarrier injection in a transition metal oxide heterostructure

    NASA Astrophysics Data System (ADS)

    Muraoka, Y.; Yamauchi, T.; Ueda, Y.; Hiroi, Z.

    2002-12-01

    An efficient method for doping a transition metal oxide (TMO) with hole carriers is presented: photocarrier injection (PCI) in an oxide heterostructure. It is shown that an insulating vanadium dioxide (VO2) film is rendered metallic under light irradiation by PCI from an n-type titanium dioxide (TiO2) substrate doped with Nb. Consequently, a large photoconductivity, which is exceptional for TMOs, is found in the VO2/TiO2:Nb heterostructure. We propose an electronic band structure where photoinduced holes created in TiO2:Nb can be transferred into the filled V 3d band via the low-lying O 2p band of VO2.

  10. Correlation effects in (111) bilayers of perovskite transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Okamoto, Satoshi; Zhu, Wenguang; Nomura, Yusuke; Arita, Ryotaro; Xiao, Di; Nagaosa, Naoto

    2014-05-01

    We investigate the correlation-induced Mott, magnetic, and topological phase transitions in artificial (111) bilayers of perovskite transition-metal oxides LaAuO3 and SrIrO3 for which the previous density-functional theory calculations predicted topological insulating states. Using the dynamical-mean-field theory with realistic band structures and Coulomb interactions, LaAuO3 bilayer is shown to be far away from a Mott insulating regime, and a topological-insulating state is robust. On the other hand, SrIrO3 bilayer is on the verge of an orbital-selective topological Mott transition and turns to a trivial insulator by an antiferromagnetic ordering. Oxide bilayers thus provide a novel class of topological materials for which the interplay between the spin-orbit coupling and electron-electron interactions is a fundamental ingredient.

  11. Transition-metal-free BF₃-mediated oxidative and non-oxidative cross-coupling of pyridines.

    PubMed

    Chen, Quan; León, Thierry; Knochel, Paul

    2014-08-11

    We report a BF3-mediated direct alkynylation of pyridines at C(2) by using a variety of alkynyllithium reagents (oxidative cross-coupling). Moreover, we have developed a novel transition-metal-free cross-coupling method between alkylmagnesium reagents and 4-substituted pyridines, such as isonicotinonitrile and 4-chloropyridine, by employing BF3⋅OEt2 as a promoter. The combination of these methods enabled us to efficiently prepare a range of di-, tri-, and tetrasubstituted pyridines.

  12. Physical Theory of Voltage Fade in Lithium- and Manganese-Rich Transition Metal Oxides

    SciTech Connect

    Rinaldo, Steven G.; Gallagher, Kevin G.; Long, Brandon R.; Croy, Jason R.; Bettge, Martin; Abraham, Daniel P.; Bareno, Javier; Dees, Dennis W.

    2015-03-04

    Lithium- and manganese-rich (LMR) transition metal oxide cathodes are of interest for lithium-ion battery applications due to their increased energy density and decreased cost. However, the advantages in energy density and cost are offset, in part, due to the phenomena of voltage fade. Specifically, the voltage profiles (voltage as a function of capacity) of LMR cathodes transform from a high energy configuration to a lower energy configuration as they are repeatedly charged (Li removed) and discharged (Li inserted). Here, we propose a physical model of voltage fade that accounts for the emergence of a low voltage Li phase due to the introduction of transition metal ion defects within a parent Li phase. The phenomenological model was re-cast in a general form and experimental LMR charge profiles were de-convoluted to extract the evolutionary behavior of various components of LMR capacitance profiles. Evolution of the voltage fade component was found to follow a universal growth curve with a maximal voltage fade capacity of ≈ 20% of the initial total capacity.

  13. Physical Theory of Voltage Fade in Lithium- and Manganese-Rich Transition Metal Oxides

    DOE PAGES

    Rinaldo, Steven G.; Gallagher, Kevin G.; Long, Brandon R.; ...

    2015-03-04

    Lithium- and manganese-rich (LMR) transition metal oxide cathodes are of interest for lithium-ion battery applications due to their increased energy density and decreased cost. However, the advantages in energy density and cost are offset, in part, due to the phenomena of voltage fade. Specifically, the voltage profiles (voltage as a function of capacity) of LMR cathodes transform from a high energy configuration to a lower energy configuration as they are repeatedly charged (Li removed) and discharged (Li inserted). Here, we propose a physical model of voltage fade that accounts for the emergence of a low voltage Li phase due tomore » the introduction of transition metal ion defects within a parent Li phase. The phenomenological model was re-cast in a general form and experimental LMR charge profiles were de-convoluted to extract the evolutionary behavior of various components of LMR capacitance profiles. Evolution of the voltage fade component was found to follow a universal growth curve with a maximal voltage fade capacity of ≈ 20% of the initial total capacity.« less

  14. Electronic structure at transition metal phthalocyanine-transition metal oxide interfaces: Cobalt phthalocyanine on epitaxial MnO films

    SciTech Connect

    Glaser, Mathias; Peisert, Heiko Adler, Hilmar; Aygül, Umut; Ivanovic, Milutin; Chassé, Thomas; Nagel, Peter; Merz, Michael; Schuppler, Stefan

    2015-03-14

    The electronic structure of the interface between cobalt phthalocyanine (CoPc) and epitaxially grown manganese oxide (MnO) thin films is studied by means of photoemission (PES) and X-ray absorption spectroscopy (XAS). Our results reveal a flat-lying adsorption geometry of the molecules on the oxide surface which allows a maximal interaction between the π-system and the substrate. A charge transfer from MnO, in particular, to the central metal atom of CoPc is observed by both PES and XAS. The change of the shape of N-K XAS spectra at the interface points, however, to the involvement of the Pc macrocycle in the charge transfer process. As a consequence of the charge transfer, energetic shifts of MnO related core levels were observed, which are discussed in terms of a Fermi level shift in the semiconducting MnO films due to interface charge redistribution.

  15. Rapid Mapping of Lithiation Dynamics in Transition Metal Oxide Particles with Operando X-ray Absorption Spectroscopy

    PubMed Central

    Nowack, Lea; Grolimund, Daniel; Samson, Vallerie; Marone, Federica; Wood, Vanessa

    2016-01-01

    Since the commercialization of lithium ion batteries (LIBs), layered transition metal oxides (LiMO2, where M = Co, Mn, Ni, or mixtures thereof) have been materials of choice for LIB cathodes. During cycling, the transition metals change their oxidation states, an effect that can be tracked by detecting energy shifts in the X-ray absorption near edge structure (XANES) spectrum. X-ray absorption spectroscopy (XAS) can therefore be used to visualize and quantify lithiation kinetics in transition metal oxide cathodes; however, in-situ measurements are often constrained by temporal resolution and X-ray dose, necessitating compromises in the electrochemistry cycling conditions used or the materials examined. We report a combined approach to reduce measurement time and X-ray exposure for operando XAS studies of lithium ion batteries. A highly discretized energy resolution coupled with advanced post-processing enables rapid yet reliable identification of the oxidation state. A full-field microscopy setup provides sub-particle resolution over a large area of battery electrode, enabling the oxidation state within many transition metal oxide particles to be tracked simultaneously. Here, we apply this approach to gain insights into the lithiation kinetics of a commercial, mixed-metal oxide cathode material, nickel cobalt aluminium oxide (NCA), during (dis)charge and its degradation during overcharge. PMID:26908198

  16. Ionic liquid-mediated synthesis of meso-scale porous lanthanum-transition-metal perovskites with high CO oxidation performance

    SciTech Connect

    Lu, Hanfeng; Zhang, Pengfei; Qiao, Zhen-An; Zhang, Jinshui; Zhu, Huiyuan; Chen, Jihua; Chen, Yinfei; Dai, Sheng

    2015-01-01

    Lanthanum-transition-metal perovskites with robust meso-scale porous frameworks (meso-LaMO3) are synthesized through use of ionic liquids. The resultant samples demonstrate a rather high activity for CO oxidation, by taking advantage of unique nanostructure-derived benefits. This synthesis strategy opens up a new opportunity for preparing functional mesoporous complex oxides of various compositions.

  17. Ionic liquid-mediated synthesis of meso-scale porous lanthanum-transition-metal perovskites with high CO oxidation performance

    DOE PAGES

    Lu, Hanfeng; Zhang, Pengfei; Qiao, Zhen-An; ...

    2015-01-01

    Lanthanum-transition-metal perovskites with robust meso-scale porous frameworks (meso-LaMO3) are synthesized through use of ionic liquids. The resultant samples demonstrate a rather high activity for CO oxidation, by taking advantage of unique nanostructure-derived benefits. This synthesis strategy opens up a new opportunity for preparing functional mesoporous complex oxides of various compositions.

  18. Rapid Mapping of Lithiation Dynamics in Transition Metal Oxide Particles with Operando X-ray Absorption Spectroscopy

    NASA Astrophysics Data System (ADS)

    Nowack, Lea; Grolimund, Daniel; Samson, Vallerie; Marone, Federica; Wood, Vanessa

    2016-02-01

    Since the commercialization of lithium ion batteries (LIBs), layered transition metal oxides (LiMO2, where M = Co, Mn, Ni, or mixtures thereof) have been materials of choice for LIB cathodes. During cycling, the transition metals change their oxidation states, an effect that can be tracked by detecting energy shifts in the X-ray absorption near edge structure (XANES) spectrum. X-ray absorption spectroscopy (XAS) can therefore be used to visualize and quantify lithiation kinetics in transition metal oxide cathodes; however, in-situ measurements are often constrained by temporal resolution and X-ray dose, necessitating compromises in the electrochemistry cycling conditions used or the materials examined. We report a combined approach to reduce measurement time and X-ray exposure for operando XAS studies of lithium ion batteries. A highly discretized energy resolution coupled with advanced post-processing enables rapid yet reliable identification of the oxidation state. A full-field microscopy setup provides sub-particle resolution over a large area of battery electrode, enabling the oxidation state within many transition metal oxide particles to be tracked simultaneously. Here, we apply this approach to gain insights into the lithiation kinetics of a commercial, mixed-metal oxide cathode material, nickel cobalt aluminium oxide (NCA), during (dis)charge and its degradation during overcharge.

  19. Synthesis of indazoles and azaindazoles by intramolecular aerobic oxidative C-N coupling under transition-metal-free conditions.

    PubMed

    Hu, Jiantao; Xu, Huacheng; Nie, Pengju; Xie, Xiaobo; Nie, Zongxiu; Rao, Yu

    2014-04-01

    A transition-metal-free oxidative C-N coupling method has been developed for the synthesis of 1H-azaindazoles and 1H-indazoles from easily accessible hydrazones. The procedure uses TEMPO, a basic additive, and dioxygen gas as the terminal oxidant. This reaction demonstrates better reactivity, functional group tolerance, and broader scope than comparable metal catalyzed reactions.

  20. First principles scheme to evaluate band edge positions in potential transition metal oxide photocatalysts and photoelectrodes.

    PubMed

    Toroker, Maytal Caspary; Kanan, Dalal K; Alidoust, Nima; Isseroff, Leah Y; Liao, Peilin; Carter, Emily A

    2011-10-06

    The positions of electronic band edges are one important metric for determining a material's capability to function in a solar energy conversion device that produces fuels from sunlight. In particular, the position of the valence band maximum (conduction band minimum) must lie lower (higher) in energy than the oxidation (reduction) reaction free energy in order for these reactions to be thermodynamically favorable. We present first principles quantum mechanics calculations of the band edge positions in five transition metal oxides and discuss the feasibility of using these materials in photoelectrochemical cells that produce fuels, including hydrogen, methane, methanol, and formic acid. The band gap center is determined within the framework of DFT+U theory. The valence band maximum (conduction band minimum) is found by subtracting (adding) half of the quasiparticle gap obtained from a non-self-consistent GW calculation. The calculations are validated against experimental data where possible; results for several materials including manganese(ii) oxide, iron(ii) oxide, iron(iii) oxide, copper(i) oxide and nickel(ii) oxide are presented.

  1. High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

    SciTech Connect

    Scalettar, Richard T.; Pickett, Warren E.

    2004-07-01

    This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (1) Mott transitions in transition metal oxides, (2) magnetism in half-metallic compounds, and (3) large volume-collapse transitions in f-band metals.

  2. High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

    SciTech Connect

    Richard T. Scalettar; Warren E. Pickett

    2005-08-02

    This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (i) Mott transitions in transition metal oxides, (ii) magnetism in half-metallic compounds, and (iii) large volume-collapse transitions in f-band metals.

  3. Onset conditions for gas phase reaction and nucleation in the CVD of transition metal oxides

    NASA Technical Reports Server (NTRS)

    Collins, J.; Rosner, D. E.; Castillo, J.

    1992-01-01

    A combined experimental/theoretical study is presented of the onset conditions for gas phase reaction and particle nucleation in hot substrate/cold gas CVD of transition metal oxides. Homogeneous reaction onset conditions are predicted using a simple high activation energy reacting gas film theory. Experimental tests of the basic theory are underway using an axisymmetric impinging jet CVD reactor. No vapor phase ignition has yet been observed in the TiCl4/O2 system under accessible operating conditions (below substrate temperature Tw = 1700 K). The goal of this research is to provide CVD reactor design and operation guidelines for achieving acceptable deposit microstructures at the maximum deposition rate while simultaneously avoiding homogeneous reaction/nucleation and diffusional limitations.

  4. Interface engineering of quantum Hall effects in digital transition metal oxide heterostructures.

    PubMed

    Xiao, Di; Zhu, Wenguang; Ran, Ying; Nagaosa, Naoto; Okamoto, Satoshi

    2011-12-20

    Topological insulators are characterized by a non-trivial band topology driven by the spin-orbit coupling. To fully explore the fundamental science and application of topological insulators, material realization is indispensable. Here we predict, based on tight-binding modelling and first-principles calculations, that bilayers of perovskite-type transition-metal oxides grown along the [111] crystallographic axis are potential candidates for two-dimensional topological insulators. The topological band structure of these materials can be fine-tuned by changing dopant ions, substrates and external gate voltages. We predict that LaAuO(3) bilayers have a topologically non-trivial energy gap of about 0.15 eV, which is sufficiently large to realize the quantum spin Hall effect at room temperature. Intriguing phenomena, such as fractional quantum Hall effect, associated with the nearly flat topologically non-trivial bands found in e(g) systems are also discussed.

  5. Fully-Coupled Thermo-Electrical Modeling and Simulation of Transition Metal Oxide Memristors

    SciTech Connect

    Mamaluy, Denis; Gao, Xujiao; Tierney, Brian David; Marinella, Matthew; Mickel, Patrick; Tierney, Brian D.

    2016-11-01

    Transition metal oxide (TMO) memristors have recently attracted special attention from the semiconductor industry and academia. Memristors are one of the strongest candidates to replace flash memory, and possibly DRAM and SRAM in the near future. Moreover, memristors have a high potential to enable beyond-CMOS technology advances in novel architectures for high performance computing (HPC). The utility of memristors has been demonstrated in reprogrammable logic (cross-bar switches), brain-inspired computing and in non-CMOS complementary logic. Indeed, the potential use of memristors as logic devices is especially important considering the inevitable end of CMOS technology scaling that is anticipated by 2025. In order to aid the on-going Sandia memristor fabrication effort with a memristor design tool and establish a clear physical picture of resistance switching in TMO memristors, we have created and validated with experimental data a simulation tool we name the Memristor Charge Transport (MCT) Simulator.

  6. Interface engineering of quantum Hall effects in digital transition metal oxide heterostructures

    SciTech Connect

    Xiao, Di; Zhu, Wenguang; Ran, Ying; Nagaosa, Naoto; Okamoto, Satoshi

    2011-01-01

    Topological insulators (TIs) are characterized by a non-trivial band topology driven by the spin-orbit coupling. To fully explore the fundamental science and application of TIs, material realization is indispensable. Here we predict, based on tight-binding modeling and first-principles calculations, that bilayers of perovskite-type transition-metal oxides grown along the [111] crystallographic axis are potential candidates for two-dimensional TIs. The topological band structure of these materials can be fine-tuned by changing dopant ions, substrates and external gate voltages. We predict that LaAuO$_3$ bilayers have a topologically non-trivial energy gap of about 0.15~eV, which is sufficiently large to realize the quantum spin Hall effect at room temperature. Intriguing phenomena, such as fractional quantum Hall effect, associated with the nearly flat topologically non-trivial bands found in $e_g$ systems are also discussed.

  7. Systematic thermodynamics of Magneli-phase and other transition metal oxides.

    PubMed

    Glasser, Leslie

    2009-11-02

    Both the molar enthalpies of formation and the absolute entropies of eight transition metal oxides are found to correlate very strongly with their formula unit volumes at room temperature. The metals are Ti, V, Cr, Nb, Mo, Ce, Pr, and Tb. In particular, the thermodynamic values of additive entities (such as TiO(2) in Ti(n)O(2n-1)) in Magneli phases (that is, recombination phases based on rebuilding after shear) are very close to those of the entity as a pure compound. Thus, reliable values of these thermodynamic properties can readily be predicted for unmeasured or even unsynthesized examples, and literature values can be checked. These assertions are checked against published results for which incomplete data is available. The contributions of the disordered regions which form between the added entities is tentatively estimated.

  8. Mixed transition-metal oxides: design, synthesis, and energy-related applications.

    PubMed

    Yuan, Changzhou; Wu, Hao Bin; Xie, Yi; Lou, Xiong Wen David

    2014-02-03

    A promising family of mixed transition-metal oxides (MTMOs) (designated as Ax B3-x O4 ; A, B=Co, Ni, Zn, Mn, Fe, etc.) with stoichiometric or even non-stoichiometric compositions, typically in a spinel structure, has recently attracted increasing research interest worldwide. Benefiting from their remarkable electrochemical properties, these MTMOs will play significant roles for low-cost and environmentally friendly energy storage/conversion technologies. In this Review, we summarize recent research advances in the rational design and efficient synthesis of MTMOs with controlled shapes, sizes, compositions, and micro-/nanostructures, along with their applications as electrode materials for lithium-ion batteries and electrochemical capacitors, and efficient electrocatalysts for the oxygen reduction reaction in metal-air batteries and fuel cells. Some future trends and prospects to further develop advanced MTMOs for next-generation electrochemical energy storage/conversion systems are also presented.

  9. Influence of transition metal electronegativity on the oxygen storage capacity of perovskite oxides.

    PubMed

    Liu, Lu; Taylor, Daniel D; Rodriguez, Efrain E; Zachariah, Michael R

    2016-08-16

    The selection of highly efficient oxygen carriers (OCs) is a key step necessary for the practical development of chemical looping combustion (CLC). In this study, a series of ABO3 perovskites, where A = La, Ba, Sr, Ca and B = Cr, Mn, Fe, Co, Ni, Cu, are synthesized and tested in a fixed bed reactor for reactivity and stability as OCs with CH4 as the fuel. We find that the electronegativity of the transition metal on the B-site (λB), is a convenient descriptor for oxygen storage capacity (OSC) of our perovskite samples. By plotting OSC for total methane oxidation against λB, we observe an inverted volcano plot relationship. These results could provide useful guidelines for perovskite OC design and their other energy related applications.

  10. Electrical conductivity in oxygen-deficient phases of transition metal oxides from first-principles calculations.

    SciTech Connect

    Bondi, Robert James; Desjarlais, Michael Paul; Thompson, Aidan Patrick; Brennecka, Geoffrey L.; Marinella, Matthew

    2013-09-01

    Density-functional theory calculations, ab-initio molecular dynamics, and the Kubo-Greenwood formula are applied to predict electrical conductivity in Ta2Ox (0 x 5) as a function of composition, phase, and temperature, where additional focus is given to various oxidation states of the O monovacancy (VOn; n=0,1+,2+). Our calculations of DC conductivity at 300K agree well with experimental measurements taken on Ta2Ox thin films and bulk Ta2O5 powder-sintered pellets, although simulation accuracy can be improved for the most insulating, stoichiometric compositions. Our conductivity calculations and further interrogation of the O-deficient Ta2O5 electronic structure provide further theoretical basis to substantiate VO0 as a donor dopant in Ta2O5 and other metal oxides. Furthermore, this dopant-like behavior appears specific to neutral VO cases in both Ta2O5 and TiO2 and was not observed in other oxidation states. This suggests that reduction and oxidation reactions may effectively act as donor activation and deactivation mechanisms, respectively, for VO0 in transition metal oxides.

  11. Transition metal oxides for organic electronics: energetics, device physics and applications.

    PubMed

    Meyer, Jens; Hamwi, Sami; Kröger, Michael; Kowalsky, Wolfgang; Riedl, Thomas; Kahn, Antoine

    2012-10-23

    During the last few years, transition metal oxides (TMO) such as molybdenum tri-oxide (MoO(3) ), vanadium pent-oxide (V(2) O(5) ) or tungsten tri-oxide (WO(3) ) have been extensively studied because of their exceptional electronic properties for charge injection and extraction in organic electronic devices. These unique properties have led to the performance enhancement of several types of devices and to a variety of novel applications. TMOs have been used to realize efficient and long-term stable p-type doping of wide band gap organic materials, charge-generation junctions for stacked organic light emitting diodes (OLED), sputtering buffer layers for semi-transparent devices, and organic photovoltaic (OPV) cells with improved charge extraction, enhanced power conversion efficiency and substantially improved long term stability. Energetics in general play a key role in advancing device structure and performance in organic electronics; however, the literature provides a very inconsistent picture of the electronic structure of TMOs and the resulting interpretation of their role as functional constituents in organic electronics. With this review we intend to clarify some of the existing misconceptions. An overview of TMO-based device architectures ranging from transparent OLEDs to tandem OPV cells is also given. Various TMO film deposition methods are reviewed, addressing vacuum evaporation and recent approaches for solution-based processing. The specific properties of the resulting materials and their role as functional layers in organic devices are discussed.

  12. Introducing Barium in Transition Metal Oxide Frameworks: Impact upon Superconductivity, Magnetism, Multiferroism and Oxygen Diffusion and Storage.

    PubMed

    Raveau, Bernard

    2016-11-25

    The role of barium in the structural chemistry of some transition metal oxides of the series "Cu, Mn, Fe,Co" is reviewed, based on its size effect and its particular chemical bonding. Its impact upon various properties, superconductivity, magnetism, multiferroism, oxygen storage is emphasized.

  13. Simulation of no oxidation catalysis over oxygen-covered transition metal surfaces

    NASA Astrophysics Data System (ADS)

    Getman, Rachel B.

    Lean burn (excess O2) automobile engines are more energy efficient than their stoichiometric or rich (O2 starved) burn counterparts, but technologies do not exist to effectively remediate harmful NO x (x = 1,2) compounds from lean exhaust. Current removal strategies rely in part on the catalytic oxidation of NO to NO 2 NO+1/2O2 \\rarrr NO2 Pt is the most active metal, but there is a strong drive to use less expensive materials. Understanding how Pt functions is a key step in catalyst design. Prior experiments and theory indicate the catalysis is promoted at high O coverage (thetaO = NO/ NPt), but too much O is inhibitive: Pt is prone to oxidative deactivation. The rate is promoted by high O2 pressures and inhibited by product NO2. The latter is true even after correcting for approach to equilibrium, suggesting NO2 hinders the reaction kinetics. In this work, we attempt to understand these phenomena with molecular simulation. We use density functional theory, first principles thermodynamics, and mean field microkinetic modeling to elucidate the catalysis under actual reaction conditions. We find the reaction occurs at 0.25--0.50 monolayer O. At these thetaO, the kinetics of O2 dissociation (O2 + 2* → 2O*) are strongly inhibited due to repulsive interactions on the surface, but the O--NO bond formation (NO* + O* ⇌ NO2 + 2*) kinetics are facile. In contrast to prior reports, we show O2 dissociation is rate limiting, and O--NO bond formation is equilibrated. The rate is strongly dependent on pO2 , and the O coverage is governed by pNO2 /pNO, leading to the observed rate inhibition by NO2. These observations are in excellent agreement with experiment. We apply our models to other transition metals and transition metal alloys to facilitate new catalyst design. Analysis indicates such materials should exhibit nearly identical behavior to Pt, offering no improvements in rate or propensity to oxidize. Screening the catalytic properties of Au nanoparticles and the O

  14. Raman microscopy of lithium-manganese-rich transition metal oxide cathodes

    DOE PAGES

    Ruther, Rose E.; Callender, Andrew F.; Zhou, Hui; ...

    2014-11-15

    Lithium-rich and manganese-rich (LMR) layered transition metal (TM) oxide composites with general formula xLi2MnO3·(1-x)LiMO2 (M = Ni, Co, Mn) are promising cathode candidates for high energy density lithium ion batteries. Lithium-manganese-rich TM oxides crystallize as a nanocomposite layered phase whose structure further evolves with electrochemical cycling. Raman spectroscopy is a powerful tool to monitor the crystal chemistry and correlate phase changes with electrochemical behavior. While several groups have reported Raman spectra of lithium rich TM oxides, the data show considerable variability in terms of both the vibrational features observed and their interpretation. In this paper, Raman microscopy is used tomore » investigate lithium-rich and manganese-rich TM cathodes as a function of voltage and electrochemical cycling at various temperatures. No growth of a spinel phase is observed within the cycling conditions. However, analysis of the Raman spectra does indicate the structure of LMR-NMC deviates significantly from an ideal layered phase. Finally, the results also highlight the importance of using low laser power and large sample sizes to obtain consistent data sets.« less

  15. Raman microscopy of lithium-manganese-rich transition metal oxide cathodes

    SciTech Connect

    Ruther, Rose E.; Callender, Andrew F.; Zhou, Hui; Martha, Surendra K.; Nanda, Jagjit

    2014-11-15

    Lithium-rich and manganese-rich (LMR) layered transition metal (TM) oxide composites with general formula xLi2MnO3·(1-x)LiMO2 (M = Ni, Co, Mn) are promising cathode candidates for high energy density lithium ion batteries. Lithium-manganese-rich TM oxides crystallize as a nanocomposite layered phase whose structure further evolves with electrochemical cycling. Raman spectroscopy is a powerful tool to monitor the crystal chemistry and correlate phase changes with electrochemical behavior. While several groups have reported Raman spectra of lithium rich TM oxides, the data show considerable variability in terms of both the vibrational features observed and their interpretation. In this paper, Raman microscopy is used to investigate lithium-rich and manganese-rich TM cathodes as a function of voltage and electrochemical cycling at various temperatures. No growth of a spinel phase is observed within the cycling conditions. However, analysis of the Raman spectra does indicate the structure of LMR-NMC deviates significantly from an ideal layered phase. Finally, the results also highlight the importance of using low laser power and large sample sizes to obtain consistent data sets.

  16. CeO2 nanorods-supported transition metal catalysts for CO oxidation.

    PubMed

    Mock, Samantha A; Sharp, Shannon E; Stoner, Thomas R; Radetic, Michael J; Zell, Elizabeth T; Wang, Ruigang

    2016-03-15

    A catalytically active oxide support in combination with metal catalysts is required in order to achieve better low temperature activity and selectivity. Here, we report that CeO2 nanorods with a superior surface oxygen release/storage capability were used as an active support of transition metal (TM) catalysts (Mn, Fe, Co, Ni, Cu) for CO oxidation reaction. The as-prepared CeO2 nanorods supported 10 wt% TM catalysts were highly active for CO oxidation at low temperature, except for the Fe sample. It is found that the 10%Cu-CeO2 catalyst performed best, and it provided a lower light-off temperature with T50 (50% conversion) at 75 °C and T100 (100% conversion) of CO to CO2 at 194 °C. The atomic level surface structure of CeO2 nanorods was investigated in order to understand the improved low temperature catalytic activity. The richness of surface roughness and various defects (voids, lattice distortion, bending, steps, twinning) on CeO2 nanorods could facilitate oxygen release and storage. According to XRD and Raman analysis, copper species migrate into the bulk CeO2 nanorods to a greater degree. Since CO adsorbed over the surface of the catalyst/support is detrimental to its catalytic activity, the surface defects on the CeO2 nanorods and CeO2-TM interactions were critical to the enhanced activity.

  17. Unravelling structural ambiguities in lithium- and manganese-rich transition metal oxides

    DOE PAGES

    Shukla, Alpesh Khushalchand; Ramasse, Quentin M.; Ophus, Colin; ...

    2015-10-29

    Although Li- and Mn-rich transition metal oxides have been extensively studied as high-capacity cathode materials for Li-ion batteries, the crystal structure of these materials in their pristine state is not yet fully understood. Here we apply complementary electron microscopy and spectroscopy techniques at multi-length scale on well-formed Li1.2(Ni0.13Mn0.54Co0.13)O2 crystals with two different morphologies as well as two commercially available materials with similar compositions, and unambiguously describe the structural make-up of these samples. Systematically observing the entire primary particles along multiple zone axes reveals that they are consistently made up of a single phase, save for rare localized defects and amore » thin surface layer on certain crystallographic facets. Finally and more specifically, we show the bulk of the oxides can be described as an aperiodic crystal consisting of randomly stacked domains that correspond to three variants of monoclinic structure, while the surface is composed of a Co- and/or Ni-rich spinel with antisite defects.« less

  18. Unravelling structural ambiguities in lithium- and manganese-rich transition metal oxides

    PubMed Central

    Shukla, Alpesh Khushalchand; Ramasse, Quentin M.; Ophus, Colin; Duncan, Hugues; Hage, Fredrik; Chen, Guoying

    2015-01-01

    Although Li- and Mn-rich transition metal oxides have been extensively studied as high-capacity cathode materials for Li-ion batteries, the crystal structure of these materials in their pristine state is not yet fully understood. Here we apply complementary electron microscopy and spectroscopy techniques at multi-length scale on well-formed Li1.2(Ni0.13Mn0.54Co0.13)O2 crystals with two different morphologies as well as two commercially available materials with similar compositions, and unambiguously describe the structural make-up of these samples. Systematically observing the entire primary particles along multiple zone axes reveals that they are consistently made up of a single phase, save for rare localized defects and a thin surface layer on certain crystallographic facets. More specifically, we show the bulk of the oxides can be described as an aperiodic crystal consisting of randomly stacked domains that correspond to three variants of monoclinic structure, while the surface is composed of a Co- and/or Ni-rich spinel with antisite defects. PMID:26510508

  19. Unravelling structural ambiguities in lithium- and manganese-rich transition metal oxides

    SciTech Connect

    Shukla, Alpesh Khushalchand; Ramasse, Quentin M.; Ophus, Colin; Duncan, Hugues; Hage, Fredrik; Chen, Guoying

    2015-10-29

    Although Li- and Mn-rich transition metal oxides have been extensively studied as high-capacity cathode materials for Li-ion batteries, the crystal structure of these materials in their pristine state is not yet fully understood. Here we apply complementary electron microscopy and spectroscopy techniques at multi-length scale on well-formed Li1.2(Ni0.13Mn0.54Co0.13)O2 crystals with two different morphologies as well as two commercially available materials with similar compositions, and unambiguously describe the structural make-up of these samples. Systematically observing the entire primary particles along multiple zone axes reveals that they are consistently made up of a single phase, save for rare localized defects and a thin surface layer on certain crystallographic facets. Finally and more specifically, we show the bulk of the oxides can be described as an aperiodic crystal consisting of randomly stacked domains that correspond to three variants of monoclinic structure, while the surface is composed of a Co- and/or Ni-rich spinel with antisite defects.

  20. Hydrazine reduction of transition metal oxides - In situ characterization using X-ray photoelectron spectroscopy

    NASA Technical Reports Server (NTRS)

    Littrell, D. M.; Tatarchuk, B. J.

    1986-01-01

    The transition metal oxides (TMOs) V2O5, FeO3, Co3O4, NiO, CuO, and ZnO were exposed to hydrazine at various pressures. The metallic surfaces were surveyed by in situ X-ray photoelectron spectroscopy to determine the irrelative rate of reduction by hydrazine. The most easily reducible oxide, CuO, could be reduced to the metallic state at room temperature and 10 to the -6th torr. The reaction is first order with respect to CuO, with an activation energy of about 35 kJ/mol. Two types of adsorption were seen to occur at 295 K: (1) a reversible component in which the measured N:Cu ratio increased to 0.60 at hydrazine pressures up to 0.5 torr, and (2) an irreversible component, with a N:Cu ratio of 0.28, which could not be removed by extended vacuum pumping. The results of this study are useful for the identification of TMO's that can be used as solid neatallizers of hydrazine spills, and for the preparation of metal surfaces for electroplating and evaporative thin-film coating.

  1. Non--Cubic Symmetry of the Electronic Response in AFM Late Transition--Metal Oxides.

    NASA Astrophysics Data System (ADS)

    Posternak, M.; Baldereschi, A.; Massidda, S.; Resta, R.

    1998-03-01

    The late transition--metal monoxides (MnO, FeO, CoO, NiO) have the rocksalt structure in their paramagnetic phase, while below the Neel temperature a weak structural distortion accompanies an AFM ordering of type II. Therefore, it is generally assumed that most nonmagnetic (i.e. spin--integrated) crystalline properties are essentially cubic: we give here convincing evidence of the contrary. We focus on the half--filled d shell oxide MnO as the most suitable case study, on which we perform accurate ab--initio, all--electron calculations, within different one--particle schemes. In order to study the symmetry lowering due to AFM ordering, we assume an ideal cubic geometry throughout. The calculated TO frequencies and Born effective charge tensor do not have cubic symmetry. The standard LSD severely exaggerates the deviations from cubic symmetry, confirming its unreliability for calculating properties of insulating AFM oxides, while a model self--energy correction scheme(S. Massidda et al.), Phys. Rev. B 55, 13494 (1997). reduces considerably the anisotropy. We also explain the origin and the magnitude of this effect in terms of the mixed charge--transfer/Mott--Hubbard character of MnO.

  2. Control method for transition metal oxides as a hole-injection layer for organic light-emitting devices

    NASA Astrophysics Data System (ADS)

    Zhang, Wejiang; Zhang, Jie

    2013-12-01

    The mechanism of transition metal oxide, molybdenum oxide (MoOx), used as interlayers in organic light-emitting devices (OLEDs) are investigated. The electronic structures and interfacial chemical reactions are investigated with ultraviolet and x-ray photoelectron spectroscopy. The influence of evaporation temperatures on the electronic structures of MoOx films and the electrical properties of organic light emitting diodes are investigated.

  3. High-resolution structural studies of ultra-thin magnetic, transition metal overlayers and two-dimensional transition metal oxides using synchrotron radiation

    SciTech Connect

    Kellar, S.A. |

    1997-05-01

    This thesis report the surface-structure determination of three, ultra-thin magnetic transition-metal films, Fe/Au(100), Mn/Ni(100), and Mn/Cu(100) using Angle-Resolved Photoemission Extended Fine Structure (ARPEFS) and photoelectron holography. These structural studies are the first to use non-s initial states in the ARPEFS procedure. This thesis also reports an ARPEFS surface-structure determination of a two-dimensional transition-metal oxide, [(1 x 1)O/W(110)] x 12. The authors have analyzed the ARPFES signal from the Au 4f{sub 7/5} core level of the Au(1 ML)/Fe(15 ML)/Au(100) system. The analysis shows that the Fe grows layer by layer with one monolayer of gold, acting as a surfactant, remaining on top of the growing Fe layers. These surface gold atoms sit in the four-fold hollow site, 1.67 {+-} 0.02 A above the iron surface. The grown Fe layer is very much like the bulk, bcc iron, with an interlayer spacing of 1.43 {+-} 0.03 A. Analysis of the Mn 3p ARPEFS signals from c(2 x 2)Mn/Ni(100) and c(2 x 2)Mn/Cu(100) shows that the Mn forms highly corrugated surface alloys. The corrugation of the Mn/Ni(100) and Mn/Cu(100) systems are 0.24 {+-} 0.02 A and 0.30 {+-} 0.04 A respectively. In both cases the Mn is sticking above the plane of the surface substrate atoms. For the Mn/Ni(100) system the first layer Ni is contracted 4% from the bulk value. The Mn/Cu(100) system shows bulk spacing for the substrate Cu. Photoelectron holography shows that the Mn/Ni interface is very abrupt with very little Mn leaking into the second layer, while the Mn/Cu(100) case has a significant amount of Mn leaking into the second layer. A new, five-element electrostatic electron lens was developed for hemispherical electron-energy analyzers. This lens system can be operated at constant transverse or constants angular magnification, and has been optimized for use with the very small photon-spot sizes. Improvements to the hemispherical electron-energy analyzer are also discussed.

  4. Density functional theory study of CO2 capture with transition metal oxides and hydroxides

    NASA Astrophysics Data System (ADS)

    Zhang, Bo; Duan, Yuhua; Johnson, Karl

    2012-02-01

    We have used density functional theory (DFT) employing several different exchange-correlation functionals (PW91, PBE, PBEsol, TPSS, and revTPSS) coupled with lattice dynamics calculations to compute the thermodynamics of CO2 absorption/desorption reactions for selected transition metal oxides, (TMO), and hydroxides, TM(OH)2, where TM = Mn, Ni, Zn, and Cd. The van't Hoff plots, which describe the reaction equilibrium as a function of the partial pressures of CO2 and H2O as well as temperature, were computed from DFT total energies, complemented by the free energy contribution of solids and gases from lattice dynamics and statistical mechanics, respectively. We find that the PBEsol functional calculations are generally in better agreement with experimental phase equilibrium data compared with the other functionals we tested. In contrast, the formation enthalpies of the compounds are better computed with the TPSS and revTPSS functionals. The PBEsol functional gives better equilibrium properties due to a partial cancellation of errors in the enthalpies of formation. We have identified all CO2 capture reactions that lie on the Gibbs free energy convex hull as a function of temperature and the partial pressures of CO2 and H2O for all TMO and TM(OH)2 systems studied here.

  5. Rovibronically Selected and Resolved Laser Photoionization and Photoelectron Studies of Transition Metal Carbides, Nitrides, and Oxides.

    NASA Astrophysics Data System (ADS)

    Luo, Zhihong; Chang, Yih-Chung; Huang, Huang; Ng, Cheuk-Yiu

    2014-06-01

    Transition metal (M) carbides, nitrides, and oxides (MX, X = C, N, and O) are important molecules in astrophysics, catalysis, and organometallic chemistry. The measurements of the ionization energies (IEs), bond energies, and spectroscopic constants for MX/MX+ in the gas phase by high-resolution photoelectron methods represent challenging but profitable approaches to gain fundamental understandings of the electronic structures and bonding properties of these compounds and their cations. We have developed a two-color laser excitation scheme for high-resolution pulse field ionization photoelectron (PFI-PE) measurements of MX species. By exciting the neutral MX species to a single rovibronic state using a visible laser prior to photoionization by a UV laser, we have obtained fully rotational resolved PFI-PE spectra for TiC+, TiO+, VCH+, VN+, CoC+, ZrO+, and NbC+. The unambiguous rotational assignments of these spectra have provided highly accurate IE values for TiC, TiO, VCH, VN, CoC, ZrO, and NbC, and spectroscopic constants for their cations.

  6. Transition metal decorated graphene-like zinc oxide monolayer: A first-principles investigation

    SciTech Connect

    Lei, Jie; Xu, Ming-Chun; Hu, Shu-Jun

    2015-09-14

    Transition metal (TM) atoms have been extensively employed to decorate the two-dimensional materials, endowing them with promising physical properties. Here, we have studied the adsorption of TM atoms (V, Cr, Mn, Fe, and Co) on graphene-like zinc oxide monolayer (g-ZnO) and the substitution of Zn by TM using first-principles calculations to search for the most likely configurations when TM atoms are deposited on g-ZnO. We found that when a V atom is initially placed on the top of Zn atom, V will squeeze out Zn from the two-dimensional plane then substitute it, which is a no barrier substitution process. For heavier elements (Cr to Co), although the substitution configurations are more stable than the adsorption ones, there is an energy barrier for the adsorption-substitution transition with the height of tens to hundreds meV. Therefore, Cr to Co prefers to be adsorbed on the hollow site or the top of oxygen, which is further verified by the molecular dynamics simulations. The decoration of TM is revealed to be a promising approach in terms of tuning the work function of g-ZnO in a large energy range.

  7. Tuning interfacial exchange interactions via electronic reconstruction in transition-metal oxide heterostructures

    SciTech Connect

    Li, Binzhi; Chopdekar, Rajesh V.; N'Diaye, Alpha T.; Mehta, Apurva; Byers, J. Paige; Browning, Nigel D.; Arenholz, Elke; Takamura, Yayoi

    2016-10-10

    The impact of interfacial electronic reconstruction on the magnetic characteristics of La0.7Sr0.3CoO3 (LSCO)/La0.7Sr0.3MnO3 (LSMO) superlattices was investigated as a function of layer thickness using a combination of soft x-ray magnetic spectroscopy and bulk magnetometry. We found that the magnetic properties of the LSCO layers are impacted by two competing electronic interactions occurring at the LSCO/substrate and LSMO/LSCO interfaces. For thin LSCO layers (< 5 nm), the heterostructures exist in a highly coupled state where the chemically distinct layers behave as a single magnetic compound with magnetically active Co2+ ions. As the LSCO thickness increases, a high coercivity LSCO layer develops which biases a low coercivity layer, which is composed not only of the LSMO layer, but also an interfacial LSCO layer. These results suggest a new route to tune the magnetic properties of transition metal oxide heterostructures through careful control of the interface structure.

  8. Microscopic magnetic nature of K2NiF4-type 3d transition metal oxides

    NASA Astrophysics Data System (ADS)

    Sugiyama, J.; Nozaki, H.; Umegaki, I.; Higemoto, W.; Ansaldo, E. J.; Brewer, J. H.; Sakurai, H.; Kao, T.-H.; Yang, H.-D.; Månsson, M.

    2014-12-01

    In order to elucidate the magnetic nature of K2NiF4-type 3d transition metal oxides, we have measured μ+SR spectra for Sr2VO4, LaSrVO4, and Sr2CrO4 using powder samples. ZF- and wTF-μ+SR measurements propose that Sr2VO4 enters into the static antiferromagnetic (AF) order phase below 8 K. In addition, TF-μ+SR measurements evidence that the transition at 105 K is not magnetic but structural and/or electronic in origin. For LaSrVO4, static long-range order has not been observed down to 20 K, while, as T decreases from 145 K, wTF asymmetry starts to decrease below 60 K, suggesting the appearance and evolution of localized magnetic moments below 60 K. For Sr2CrO4, by contrast, both ZF- and wTF-μ+SR have confirmed the presence of antiferromagnetic order below 117 K, as predicted in the χ(T) curve.

  9. The growth and analysis of transition metal oxide superlattices using advanced magnetometry techniques

    NASA Astrophysics Data System (ADS)

    Danaher, David J.

    Magnetic superlattices are the subject of increasing interest in the condensed matter community due to the consequences that arise from their reduced dimensionality. Such aspects make these superlattices useful in various electronic applications. High quality films of transition metal oxides SrRuO3 and SrMnO3, were grown by pulsed laser deposition (PLD) method in order to gain a further understanding of the parameters that determine the magnetic properties of such films. X-ray reflectivity was used to verify film thickness and quality, while the magnetic properties of the film and of the individual layers were probed using a superconducting quantum interference device (SQUID) and x-ray magnetic circular dichroism (XMCD). Some of the effects observed were expected, including enhanced coercivity, but others were more unexpected, such as anti-ferromagnetic coupling between thin layers of SrMnO3 and SrRuO3. This coupling was conspicuously absent in samples with thicker SrMnO3 layers. These results serve to further illuminate the basic properties of ferromagnetic/anti-ferromagnetic multilayers and have brought us closer to being able to individually manipulate the magnetic properties of such systems.

  10. Improved layered mixed transition metal oxides for Li-ion batteries

    SciTech Connect

    Doeff, Marca M.; Conry, Thomas; Wilcox, James

    2010-03-05

    Recent work in our laboratory has been directed towards development of mixed layered transition metal oxides with general composition Li[Ni, Co, M, Mn]O2 (M=Al, Ti) for Li ion battery cathodes. Compounds such as Li[Ni1/3Co1/3Mn1/3]O2 (often called NMCs) are currently being commercialized for use in consumer electronic batteries, but the high cobalt content makes them too expensive for vehicular applications such as electric vehicles (EV), plug-in hybrid electric vehicles (PHEVs), or hybrid electric vehicles (HEVs). To reduce materials costs, we have explored partial or full substitution of Co with Al, Ti, and Fe. Fe substitution generally decreases capacity and results in poorer rate and cycling behavior. Interestingly, low levels of substitution with Al or Ti improve aspects of performance with minimal impact on energy densities, for some formulations. High levels of Al substitution compromise specific capacity, however, so further improvements require that the Ni and Mn content be increased and Co correspondingly decreased. Low levels of Al or Ti substitution can then be used offset negative effects induced by the higher Ni content. The structural and electrochemical characterization of substituted NMCs is presented in this paper.

  11. Magnetic Excitations in Transition-metal Oxides Studied by Inelastic Neutron Scattering

    NASA Astrophysics Data System (ADS)

    Braden, M.

    2008-03-01

    Inelastic neutron scattering using a triple axis spectrometer is a very efficient tool to analyze magnetic excitations. We will discuss several recent experiments on transition-metal oxides where orbital degrees of freedom play an important role. Different kinds of experimental techniques including longitudinal and spherical polarization analysis were used in order to determine not only magnon frequencies but also polarization vectors. In layered ruthenates bands of different orbital character contribute to the magnetic excitations which are of both, ferromagnetic and antiferromagnetic, character. The orbital dependent magnetic excitations seem to play different roles in the superconducting pairing as well as in the metamagnetism . In manganates the analysis of the magnon dispersion in the charge and orbital ordered phase yields direct insight into the microscopic coupling of orbital and magnetic degrees of freedom and helps understanding, how the switching between metallic and insulating phases in manganates may occur. In multiferroic TbMnO3 the combination of our polarized neutron scattering results with the infrared measurements identifies a soft collective excitation of hybridized magnon-phonon character.

  12. Orientation of diamagnetic layered transition metal oxide particles in 1-tesla magnetic fields.

    PubMed

    Sklute, Elizabeth C; Eguchi, Miharu; Henderson, Camden N; Angelone, Mark S; Yennawar, Hemant P; Mallouk, Thomas E

    2011-02-16

    The magnetic field-driven orientation of microcrystals of six diamagnetic layered transition metal oxides (HLaNb(2)O(7), HCa(2)Nb(3)O(10)·0.5H(2)O, KNaCa(2)Nb(4)O(13), KTiTaO(5), KTiNbO(5), and H(2.2)K(1.8)Nb(6)O(17)·nH(2)O) suspended in epoxy resins was studied by X-ray diffraction using permanent magnets producing a 0.8 T field. Although the degree of orientation, quantified as the Hermans order parameter, was strongly affected by the particle size distribution, in all cases microcrystals with ∼1-2 μm lateral dimensions were found to orient with the magnetic field vector in the layer plane. Control of the orientation of ionically conducting layered oxides is of interest for practical applications in batteries and fuel cells. The consistent direction of orientation of the lamellar oxides studied can be rationalized in the framework of a quantitative bond anisotropy model developed by Uyeda (Phys. Chem. Miner.1993, 20, 77-80). The asymmetry of metal-oxygen bonding at the faces of the octahedral layers results in long and short M-O bonds perpendicular to the plane of the sheets. This distortion of the M-O octahedra, which is a structural feature of almost all layered materials that contain octahedral bonding frameworks, gives rise to the diamagnetic anisotropy and results in an easy axis or plane of magnetization in the plane of the sheets.

  13. Synthesis and structural, magnetic, thermal, and transport properties of several transition metal oxides and aresnides

    SciTech Connect

    Das, Supriyo

    2010-01-01

    Oxide compounds containing the transition metal vanadium (V) have attracted a lot of attention in the field of condensed matter physics owing to their exhibition of interesting properties including metal-insulator transitons, structural transitions, ferromagnetic and an- tiferromagnetic orderings, and heavy fermion behavior. Binary vanadium oxides VnO2n-1 where 2 ≤ n ≤ 9 have triclinic structures and exhibit metal-insulator and antiferromagnetic transitions.[1–6] The only exception is V7O13 which remains metallic down to 4 K.[7] The ternary vanadium oxide LiV2O4 has the normal spinel structure, is metallic, does not un- dergo magnetic ordering and exhibits heavy fermion behavior below 10 K.[8] CaV2O4 has an orthorhombic structure[9, 10] with the vanadium spins forming zigzag chains and has been suggested to be a model system to study the gapless chiral phase.[11, 12] These provide great motivation for further investigation of some known vanadium compounds as well as to ex- plore new vanadium compounds in search of new physics. This thesis consists, in part, of experimental studies involving sample preparation and magnetic, transport, thermal, and x- ray measurements on some strongly correlated eletron systems containing the transition metal vanadium. The compounds studied are LiV2O4, YV4O8, and YbV4O8. The recent discovery of superconductivity in RFeAsO1-xFx (R = La, Ce, Pr, Gd, Tb, Dy, Sm, and Nd), and AFe2As2 (A = Ba, Sr, Ca, and Eu) doped with K, Na, or Cs at the A site with relatively high Tc has sparked tremendous activities in the condensed matter physics community and a renewed interest in the area of superconductivity as occurred following the discovery of the layered cuprate high Tc superconductors in 1986. To discover more supercon- ductors

  14. Water adsorption and hydrolysis on molecular transition metal oxides and oxyhydroxides.

    PubMed

    Johnson, J R; Panas, I

    2000-07-24

    Addition of water to molecular transition metal oxides (TiO2(g) and CrO3(g)) and oxyhydroxides (ScO(OH)(g), VO2(OH)(g), and MnO3(OH)(g)) was studied by means of quantum chemistry. In the investigated reactions, each reaction step comprised the breaking of one M=O bond and the formation of two OH groups. Exothermicity was observed when the product had tetrahedral or lower oxygen coordination. The reactions were found to involve stable water complexes as intermediates. The stabilities of such complexes were accentuated in the addition reaction Sc(OH)3(g) + H2O(g), in which the formation of a tetrahedral complex was found exothermic. For VO(OH)3(g), CrO2(OH)2(g), and MnO3(OH)(g), water addition to the remaining M=O bonds was found endothermic, whereas the formation of water complexes, using hydrogen bonds and preserving the oxyhydroxide kernel, was preferred. Thus, the sequence of such kernels for water clustering in the investigated reactions was found to be Sc(OH)3.H2O(g), Ti(OH)4(g), VO(OH)3(g), CrO2(OH)2(g), and MnO3(OH)(g). These stability considerations are important, as CrO2(OH)2(g) is believed to be the product of water-induced degradation of the protective chromium oxide scale on stainless steel at elevated temperatures.

  15. First-principles data-driven discovery of transition metal oxides for artificial photosynthesis

    NASA Astrophysics Data System (ADS)

    Yan, Qimin

    We develop a first-principles data-driven approach for rapid identification of transition metal oxide (TMO) light absorbers and photocatalysts for artificial photosynthesis using the Materials Project. Initially focusing on Cr, V, and Mn-based ternary TMOs in the database, we design a broadly-applicable multiple-layer screening workflow automating density functional theory (DFT) and hybrid functional calculations of bulk and surface electronic and magnetic structures. We further assess the electrochemical stability of TMOs in aqueous environments from computed Pourbaix diagrams. Several promising earth-abundant low band-gap TMO compounds with desirable band edge energies and electrochemical stability are identified by our computational efforts and then synergistically evaluated using high-throughput synthesis and photoelectrochemical screening techniques by our experimental collaborators at Caltech. Our joint theory-experiment effort has successfully identified new earth-abundant copper and manganese vanadate complex oxides that meet highly demanding requirements for photoanodes, substantially expanding the known space of such materials. By integrating theory and experiment, we validate our approach and develop important new insights into structure-property relationships for TMOs for oxygen evolution photocatalysts, paving the way for use of first-principles data-driven techniques in future applications. This work is supported by the Materials Project Predictive Modeling Center and the Joint Center for Artificial Photosynthesis through the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, under Contract No. DE-AC02-05CH11231. Computational resources also provided by the Department of Energy through the National Energy Supercomputing Center.

  16. Aberration-corrected scanning transmission electron microscopy for complex transition metal oxides

    NASA Astrophysics Data System (ADS)

    Qing-Hua, Zhang; Dong-Dong, Xiao; Lin, Gu

    2016-06-01

    Lattice, charge, orbital, and spin are the four fundamental degrees of freedom in condensed matter, of which the interactive coupling derives tremendous novel physical phenomena, such as high-temperature superconductivity (high-T c SC) and colossal magnetoresistance (CMR) in strongly correlated electronic system. Direct experimental observation of these freedoms is essential to understanding the structure-property relationship and the physics behind it, and also indispensable for designing new materials and devices. Scanning transmission electron microscopy (STEM) integrating multiple techniques of structure imaging and spectrum analysis, is a comprehensive platform for providing structural, chemical and electronic information of materials with a high spatial resolution. Benefiting from the development of aberration correctors, STEM has taken a big breakthrough towards sub-angstrom resolution in last decade and always steps forward to improve the capability of material characterization; many improvements have been achieved in recent years, thereby giving an in-depth insight into material research. Here, we present a brief review of the recent advances of STEM by some representative examples of perovskite transition metal oxides; atomic-scale mapping of ferroelectric polarization, octahedral distortions and rotations, valence state, coordination and spin ordering are presented. We expect that this brief introduction about the current capability of STEM could facilitate the understanding of the relationship between functional properties and these fundamental degrees of freedom in complex oxides. Project supported by the National Key Basic Research Project, China (Grant No. 2014CB921002), the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDB07030200), and the National Natural Science Foundation of China (Grant Nos. 51522212 and 51421002).

  17. Unexpected change in the electron affinity of diamond caused by the ultra-thin transition metal oxide films

    NASA Astrophysics Data System (ADS)

    Tiwari, Amit K.; Goss, J. P.; Briddon, P. R.; Horsfall, A. B.; Wright, N. G.; Jones, R.; Rayson, M. J.

    2014-11-01

    The energetics and electronic properties of oxides of selected transition metals (Cu, Ni, Ti and Zn) adsorbed onto a diamond (001) surface are examined using density functional simulations. We find that the stoichiometric oxides of Ti and Zn exhibit large negative electronic affinities of around 3 eV, whereas the oxides Cu and Ni have a relatively small impact on the affinity. Although reactions of most metal oxides with the diamond surface are exothermic in nature, we propose that titanium, which exhibit large binding energies per metal atom in addition to a large negative electron affinity, is of particular interest for the surface coating of diamond-based electron emitters.

  18. Transition metal oxides - CrO, MoO, NiO, PdO, AgO

    NASA Technical Reports Server (NTRS)

    Bauschlicher, C. W., Jr.; Nelin, C. J.; Bagus, P. S.

    1985-01-01

    The transition-metal oxides are quite ionic; Mulliken population analyses for several oxides give a negative charge of about 0.7 electrons for oxygen. When the transition-metal d shell is only partially filled, the orbitals are involved in covalent bonds with O; both two-electron bonding (2)-antibonding (0) and one-electron bonding (2)-antibonding (1) bonds are formed. These covalent bonds occur in addition to the ionic bonding. There is d-sigma-O2 p sigma repulsion, and this repulsion is reduced when the d-sigma electron is promoted into an orbital which has dominantly 4sp-sigma character and is polarized away from O.

  19. On the character of the optical transitions in closed-shell transition metal oxides doped with Bi(3).

    PubMed

    Amer, M; Boutinaud, P

    2017-01-18

    A criterion is introduced to achieve the assignment of the optical features observed in the excitation spectra of Bi(3+) ions incorporated in closed-shell transition metal oxides. The model is based on the calculation of the energy associated with the lowest (1)S0 → (3)P1 intra-ionic transition of Bi(3+) (A-like transition), the metal-to-metal charge transfer (D-like transition) and the Stokes shift of the corresponding emission.

  20. Electrocatalytic reduction of carbon dioxide on post-transition metal and metal oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    White, James L.

    The electroreduction of carbon dioxide to liquid products is an important component in the utilization of CO2 and in the high-density storage of intermittent renewable energy in the form of chemical bonds. Materials based on indium and tin, which yield predominantly formic acid, have been investigated in order to gain a greater understanding of the electrochemically active species and the mechanism of CO2 reduction on these heavy post-transition metals, since prior studies on the bulk metals did not provide thermodynamically sensible reaction pathways. Nanoparticles of the oxides and hydroxides of tin and indium have been prepared and characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, and various electrochemical methods in order to obtain structural information and analyze the role of various surface species on the CO2 reduction pathway. On both indium and tin, metastable surface-bound hydroxides bound CO2 and formed metal carbonates, which can then be reduced electrochemically. The relevant oxidation state of tin was suggested to be SnII rather than SnIV, necessitating a pre reduction to generate the CO2-binding species. Metallic indium nanoparticles partially oxidized in air and became highly efficient CO2 reduction electrocatalysts. Unit Faradaic efficiencies for formate, much higher than on bulk indium, were achieved with only 300 mV of overpotential on these particles, which possessed an oxyhydroxide shell surrounding a conductive metallic core. Alloys and mixed-metal oxide and hydroxide particles of tin and indium have also been studied for their carbon dioxide electrocatalytic capabilities, especially in comparison to the pure metal species. Additionally, a solar-driven indium-based CO2 electrolyzer was developed to investigate the overall efficiency for intermittent energy storage. The three flow cells were powered by a commercial photovoltaic array and had a maximum conversion efficiency of incident

  1. Oxidatively Electrodeposited Thin-Film Transition Metal (Oxy)hydroxides as Oxygen Evolution Catalysts.

    PubMed

    Morales-Guio, Carlos G; Liardet, Laurent; Hu, Xile

    2016-07-20

    The electrolysis of water to produce hydrogen and oxygen is a simple and attractive approach to store renewable energies in the form of chemical fuels. The oxygen evolution reaction (OER) is a complex four-electron process that constitutes the most energy-inefficient step in water electrolysis. Here we describe a novel electrochemical method for the deposition of a family of thin-film transition metal (oxy)hydroxides as OER catalysts. The thin films have nanodomains of crystallinity with lattice spacing similar to those of double-layered hydroxides. The loadings of these thin-film catalysts were accurately determined with a resolution of below 1 μg cm(-2) using an electrochemical quartz microcrystal balance. The loading-activity relations for various catalysts were established using voltammetry and impedance spectroscopy. The thin-film catalysts have up to four types of loading-activity dependence due to film nucleation and growth as well as the resistance of the films. A zone of intrinsic activity has been identified for all of the catalysts where the mass-averaged activity remains constant while the loading is increased. According to their intrinsic activities, the metal oxides can be classified into three categories: NiOx, MnOx, and FeOx belong to category I, which is the least active; CoOx and CoNiOx belong to category II, which has medium activity; and FeNiOx, CoFeOx, and CoFeNiOx belong to category III, which is the most active. The high turnover frequencies of CoFeOx and CoFeNiOx at low overpotentials and the simple deposition method allow the fabrication of high-performance anode electrodes coated with these catalysts. In 1 M KOH and with the most active electrode, overpotentials as low as 240 and 270 mV are required to reach 10 and 100 mA cm(-2), respectively.

  2. First-principles study of nitric oxide oxidation on Pt(111) versus Pt overlayer on 3d transition metals

    SciTech Connect

    Arevalo, Ryan Lacdao; Escaño, Mary Clare Sison; Kasai, Hideaki

    2015-03-15

    Catalytic oxidation of NO to NO{sub 2} is a significant research interest for improving the quality of air through exhaust gas purification systems. In this paper, the authors studied this reaction on pure Pt and Pt overlayer on 3d transition metals using kinetic Monte Carlo simulations coupled with density functional theory based first principles calculations. The authors found that on the Pt(111) surface, NO oxidation proceeds via the Eley–Rideal mechanism, with O{sub 2} dissociative adsorption as the rate-determining step. The oxidation path via the Langmuir–Hinshelwood mechanism is very slow and does not significantly contribute to the overall reaction. However, in the Pt overlayer systems, the oxidation of NO on the surface is more thermodynamically and kinetically favorable compared to pure Pt. These findings are attributed to the weaker binding of O and NO on the Pt overlayer systems and the binding configuration of NO{sub 2} that promotes easier N-O bond formation. These results present insights for designing affordable and efficient catalysts for NO oxidation.

  3. Solventless oxidative coupling of amines to imines by using transition-metal-free metal-organic frameworks.

    PubMed

    Qiu, Xuan; Len, Christophe; Luque, Rafael; Li, Yingwei

    2014-06-01

    A highly efficient, simple, and versatile transition-metal-free metal-organic framework catalytic system is proposed for the oxidative coupling of amines to imines. The catalytic protocol features high activities and selectivities to target products; compatibility with a variety of substrates, including aliphatic amines and secondary amines; and the possibility to efficiently and selectively promote amine cross-coupling reactions. A high stability and recyclability of the catalyst is also observed under the investigated conditions. Insights into the reaction mechanism indicate the formation of a superoxide species able to efficiently promote oxidative couplings.

  4. Transition Metal-Free Selective Double sp(3) C-H Oxidation of Cyclic Amines to 3-Alkoxyamine Lactams.

    PubMed

    Osorio-Nieto, Urbano; Chamorro-Arenas, Delfino; Quintero, Leticia; Höpfl, Herbert; Sartillo-Piscil, Fernando

    2016-09-16

    The first chemical method for selective dual sp(3) C-H functionalization at the alpha-and beta positions of cyclic amines to their corresponding 3-alkoxyamine lactams is reported. Unlike traditional Cα-H oxidation of amines to amides mediated by transition metals, the present protocol, which involves the use of NaClO2/TEMPO/NaClO in either aqueous or organic solvent, not only allows the Cα-H oxidation but also the subsequent functionalization of the unreactive β-methylene group in an unprecedented tandem fashion and using environmentally friendly reactants.

  5. Electron-phonon coupling and structural phase transitions in early transition metal oxides and chalcogenides

    NASA Astrophysics Data System (ADS)

    Farley, Katie Elizabeth

    Pronounced nonlinear variation of electrical transport characteristics as a function of applied voltage, temperature, magnetic field, strain, or photo-excitation is usually underpinned by electronic instabilities that originate from the complex interplay of spin, orbital, and lattice degrees of freedom. This dissertation focuses on two canonical materials that show pronounced discontinuities in their temperature-dependent resistivity as a result of electron---phonon and electron---electron correlations: orthorhombic TaS3 and monoclinic VO2. Strong electron-phonon interactions in transition metal oxides and chalcogenides results in interesting structural and electronic phase transitions. The properties of the material can be changed drastically in response to external stimuli such as temperature, voltage, or light. Understanding the influence these interactions have on the electronic structure and ultimately transport characteristics is of utmost importance in order to take these materials from a fundamental aspect to prospective applications such as low-energy interconnects, steep-slope transistors, and synaptic neural networks. This dissertation describes synthetic routes to nanoscale TaS3 and VO2, develops mechanistic understanding of their electronic instabilities, and in the case of the latter system explores modulation of the electronic and structural phase transition via the incorporation of substitutional dopant atoms. We start in chapter 2 with a detailed study of the synthesis and electronic transport properties of TaS3, which undergoes a Peierls' distortion to form a charge density wave. Scaling this material down to the nanometer-sized regime allows for interrogation of single or discrete phase coherent domains. Using electrical transport and broad band noise measurements, the dynamics of pinning/depinning of the charge density wave is investigated. Chapter 3 provides a novel synthetic approach to produce high-edge-density MoS2 nanorods. MoS2 is a

  6. Lifetime of combustion-generated environmentally persistent free radicals on Zn(II)O and other transition metal oxides.

    PubMed

    Vejerano, Eric; Lomnicki, Slawo; Dellinger, Barry

    2012-10-26

    Previous studies indicated that Environmentally Persistent Free Radicals (EPFRs) are formed in the post-flame, cool zone of combustion. They result from the chemisorption of gas-phase products of incomplete combustion (particularly hydroxyl- and chlorine-substituted aromatics) on Cu(II)O, Fe(III)(2)O(3), and Ni(II)O domains of particulate matter (fly ash or soot particles). This study reports our detailed laboratory investigation on the lifetime of EPFRs on Zn(II)O/silica surface. Similarly, as in the case of other transition metals, chemisorption of the adsorbate on the Zn(II)O surface and subsequent transfer of electron from the adsorbate to the metal forms a surface-bound EPFR and a reduced metal ion center. The EPFRs are stabilized by their interaction with the metal oxide domain surface. The half-lives of EPFRs formed on Zn(II)O domains were the longest observed among the transition metal oxides studied and ranged from 3 to 73 days. These half-lives were an order of magnitude longer than those formed on nickel and iron oxides, and were 2 orders of magnitude longer compared to the EPFRs on copper oxide which have half-lives only on the order of hours. The longest-lived radicals on Zn(II)O correspond to the persistency in ambient air particles of almost a year. The half-life of EPFRs was found to correlate with the standard reduction potential of the associated metal.

  7. Coupling between crystal structure and magnetism in transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Barton, Phillip Thomas

    Transition-metal oxides exhibit a fascinating array of phenomena ranging from superconductivity to negative thermal expansion to catalysis. This dissertation focuses on magnetism, which is integral to engineering applications such as data storage, electric motors/generators, and transformers. The investigative approach follows structure-property relationships from materials science and draws on intuition from solid-state chemistry. The interplay between crystal structure and magnetic properties is studied experimentally in order to enhance the understanding of magnetostructural coupling mechanisms and provide insight into avenues for tuning behavior. A combination of diffraction and physical property measurements were used to study structural and magnetic phase transitions as a function of chemical composition, temperature, and magnetic field. The systems examined are of importance in Li-ion battery electrochemistry, condensed-matter physics, solid-state chemistry, and p-type transparent conducting oxides. The materials were prepared by solid-state reaction of powder reagents at high temperatures for periods lasting tens of hours. The first project discussed is of a solid solution between NiO, a correlated insulator, and LiNiO2, a layered battery cathode. Despite the deceptive structural and compositional simplicity of this system, a complete understanding of its complex magnetic properties has remained elusive. This study shows that nanoscale domains of chemical order form at intermediate compositions, creating interfaces between antiferromagnetism and ferrimagnetism that give rise to magnetic exchange bias. A simple model of the magnetism is presented along with a comprehensive phase diagram. The second set of investigations focus on the Ge-Co-O system where the spin-orbit coupling of Co(II) plays a significant role. GeCo2O 4 is reported to exhibit unusual magnetic behavior that arises from Ising spin in its spinel crystal structure. Studies by variable

  8. Relative stability of normal vs. inverse spinel for 3d transition metal oxides as lithium intercalation cathodes.

    PubMed

    Bhattacharya, Jishnu; Wolverton, C

    2013-05-07

    Spinel oxides represent an important class of cathode materials for Li-ion batteries. Two major variants of the spinel crystal structure are normal and inverse. The relative stability of normal and inverse ordering at different stages of lithiation has important consequences in lithium diffusivity, voltage, capacity retention and battery life. In this paper, we investigate the relative structural stability of normal and inverse structures of the 3d transition metal oxide spinels with first-principles DFT calculations. We have considered ternary spinel oxides LixM2O4 with M = Ti, V, Cr, Mn, Fe, Co and Ni in both lithiated (x = 1) and delithiated (x = 0) conditions. We find that for all lithiated spinels, the normal structure is preferred regardless of the metal. We observe that the normal structure for all these oxides has a lower size mismatch between octahedral cations compared to the inverse structure. With delithiation, many of the oxides undergo a change in stability with vanadium in particular, showing a tendency to occupy tetrahedral sites. We find that in the delithiated oxide, only vanadium ions can access a +5 oxidation state which prefers tetrahedral coordination. We have also calculated the average voltage of lithiation for these spinels. The calculated voltages agree well with the previously measured and calculated values, wherever available. For the yet to be characterized spinels, our calculation provides voltage values which can motivate further experimental attention. Lastly, we observe that all the normal spinel oxides of the 3d transition metal series have a driving force for a transformation to the non-spinel structure upon delithiation.

  9. Interaction at the silicon/transition metal oxide heterojunction interface and its effect on the photovoltaic performance.

    PubMed

    Liang, Zhimin; Su, Mingze; Zhou, Yangyang; Gong, Li; Zhao, Chuanxi; Chen, Keqiu; Xie, Fangyan; Zhang, Weihong; Chen, Jian; Liu, Pengyi; Xie, Weiguang

    2015-11-07

    The interfacial reaction and energy level alignment at the Si/transition metal oxide (TMO, including MoO3-x, V2O5-x, WO3-x) heterojunction are systematically investigated. We confirm that the interfacial reaction appears during the thermal deposition of TMO, with the reaction extent increasing from MoO3-x, to V2O5-x, and to WO3-x. The reaction causes the surface oxidation of silicon for faster electron/hole recombination, and the reduction of TMO for effective hole collection. The photovoltaic performance of the Si/TMO heterojunction devices is affected by the interface reaction. MoO3-x are the best hole selecting materials that induce least surface oxidation but strongest reduction. Compared with H-passivation, methyl group passivation is an effective way to reduce the interface reaction and improve the interfacial energy level alignment for better electron and hole collection.

  10. Spatially resolved surface valence gradient and structural transformation of lithium transition metal oxides in lithium-ion batteries.

    PubMed

    Liu, Hanshuo; Bugnet, Matthieu; Tessaro, Matteo Z; Harris, Kristopher J; Dunham, Mark J R; Jiang, Meng; Goward, Gillian R; Botton, Gianluigi A

    2016-10-26

    Layered lithium transition metal oxides are one of the most important types of cathode materials in lithium-ion batteries (LIBs) that possess high capacity and relatively low cost. Nevertheless, these layered cathode materials suffer structural changes during electrochemical cycling that could adversely affect the battery performance. Clear explanations of the cathode degradation process and its initiation, however, are still under debate and not yet fully understood. We herein systematically investigate the chemical evolution and structural transformation of the LiNixMnyCo1-x-yO2 (NMC) cathode material in order to understand the battery performance deterioration driven by the cathode degradation upon cycling. Using high-resolution electron energy loss spectroscopy (HR-EELS) we clarify the role of transition metals in the charge compensation mechanism, particularly the controversial Ni(2+) (active) and Co(3+) (stable) ions, at different states-of-charge (SOC) under 4.6 V operation voltage. The cathode evolution is studied in detail from the first-charge to long-term cycling using complementary diagnostic tools. With the bulk sensitive (7)Li nuclear magnetic resonance (NMR) measurements, we show that the local ordering of transition metal and Li layers (R3[combining macron]m structure) is well retained in the bulk material upon cycling. In complement to the bulk measurements, we locally probe the valence state distribution of cations and the surface structure of NMC particles using EELS and scanning transmission electron microscopy (STEM). The results reveal that the surface evolution of NMC is initiated in the first-charging step with a surface reduction layer formed at the particle surface. The NMC surface undergoes phase transformation from the layered structure to a poor electronic and ionic conducting transition-metal oxide rock-salt phase (R3[combining macron]m → Fm3[combining macron]m), accompanied by irreversible lithium and oxygen loss. In addition to the

  11. High-temperature desulfurization of gasifier effluents with rare earth and rare earth/transition metal oxides

    SciTech Connect

    Dooley, Kerry M.; Kalakota, Vikram; Adusumilli, Sumana

    2011-02-11

    We have improved the application of mixed rare-earth oxides (REOs) as hot gas desulfurization adsorbents by impregnating them on stable high surface area supports and by the inclusion of certain transition metal oxides. We report comparative desulfurization experiments at high temperature (900 K) using a synthetic biomass gasifier effluent containing 0.1 vol % H2S, along with H2, CO2, and water. More complex REO sorbents outperform the simpler CeO2/La2O3 mixtures, in some cases significantly. Supporting REOs on Al2O3 (~20 wt % REO) or ZrO2 actually increased the sulfur capacities found after several cycles on a total weight basis. Another major increase in sulfur capacity took place when MnOx or FeOx is incorporated. Apparently most of the Mn or Fe is dispersed on or near the surface of the mixed REOs because the capacities with REOs greatly exceeded those of Al2O3-supported MnOx or FeOx alone at these conditions. In contrast, incorporating Cu has little effect on sulfur adsorption capacities. Both the REO and transition metal/REO adsorbents could be regenerated completely using air for at least five repetitive cycles.

  12. Self-interaction correction in multiple scattering theory: application to transition metal oxides

    SciTech Connect

    Daene, Markus W; Lueders, Martin; Ernst, Arthur; Diemo, Koedderitzsch; Temmerman, Walter M; Szotek, Zdzislawa; Wolfam, Hergert

    2009-01-01

    We apply to transition metal monoxides the self-interaction corrected (SIC) local spin density (LSD) approximation, implemented locally in the multiple scattering theory within the Korringa-Kohn-Rostoker (KKR) band structure method. The calculated electronic structure and in particular magnetic moments and energy gaps are discussed in reference to the earlier SIC results obtained within the LMTO-ASA band structure method, involving transformations between Bloch and Wannier representations to solve the eigenvalue problem and calculate the SIC charge and potential. Since the KKR can be easily extended to treat disordered alloys, by invoking the coherent potential approximation (CPA), in this paper we compare the CPA approach and supercell calculations to study the electronic structure of NiO with cation vacancies.

  13. Atomic-Resolution Visualization of Distinctive Chemical Mixing Behavior of Ni, Co and Mn with Li in Layered Lithium Transition-Metal Oxide Cathode Materials

    SciTech Connect

    Yan, Pengfei; Zheng, Jianming; Lv, Dongping; Wei, Yi; Zheng, Jiaxin; Wang, Zhiguo; Kuppan, Saravanan; Yu, Jianguo; Luo, Langli; Edwards, Danny J.; Olszta, Matthew J.; Amine, Khalil; Liu, Jun; Xiao, Jie; Pan, Feng; Chen, Guoying; Zhang, Jiguang; Wang, Chong M.

    2015-07-06

    Capacity and voltage fading of layer structured cathode based on lithium transition metal oxide is closely related to the lattice position and migration behavior of the transition metal ions. However, it is scarcely clear about the behavior of each of these transition metal ions. We report direct atomic resolution visualization of interatomic layer mixing of transition metal (Ni, Co, Mn) and lithium ions in layer structured oxide cathodes for lithium ion batteries. Using chemical imaging with aberration corrected scanning transmission electron microscope (STEM) and DFT calculations, we discovered that in the layered cathodes, Mn and Co tend to reside almost exclusively at the lattice site of transition metal (TM) layer in the structure or little interlayer mixing with Li. In contrast, Ni shows high degree of interlayer mixing with Li. The fraction of Ni ions reside in the Li layer followed a near linear dependence on total Ni concentration before reaching saturation. The observed distinctively different behavior of Ni with respect to Co and Mn provides new insights on both capacity and voltage fade in this class of cathode materials based on lithium and TM oxides, therefore providing scientific basis for selective tailoring of oxide cathode materials for enhanced performance.

  14. Doped Mott Insulators in (111) Bilayers of Perovskite Transition-Metal Oxides with a Strong Spin-Orbit Coupling

    SciTech Connect

    Okamoto, Satoshi

    2013-01-01

    The electronic properties of Mott insulators realized in (111) bilayers of perovskite transition-metal oxides are studied. The low-energy effective Hamiltonians for such Mott insulators are derived in the presence of a strong spin-orbit coupling. These models are characterized by the antiferromagnetic Heisenberg interaction and the anisotropic interaction whose form depends on the $d$ orbital occupancy. From exact diagonalization analyses on finite clusters, the ground state phase diagrams are derived, including a Kitaev spin liquid phase in a narrow parameter regime for $t_{2g}$ systems. Slave-boson mean-field analyses indicate the possibility of novel superconducting states induced by carrier doping into the Mott-insulating parent systems, suggesting the present model systems as unique playgrounds for studying correlation-induced novel phenomena. Possible experimental realizations are also discussed.

  15. Investigation of the Spatially Resolved Electronic Structure of Single Layer WS2 on Transition Metal Oxide Surfaces

    NASA Astrophysics Data System (ADS)

    Katoch, Jyoti; Ulstrup, Søren; Koch, Roland; Schwarz, Daniel; Singh, Simranjeet; McCreary, Kathy; Keun Yoo, Hyang; Xu, Jinsong; Jonker, Berry; Kawakami, Roland; Bostwick, Aaron; Rotenberg, Eli; Jozwiak, Chris

    The family of semiconducting single layer (SL) transition metal dichalcogenides (TMDs) have lately been intensely studied, owing to the strong coupling between spin and valley degrees of freedom as well as the presence of strongly bound excitons. The choice of supporting substrate is known to strongly influence these properties. We set out to investigate the electronic properties of CVD grown SL WS2 transferred onto the dielectric oxide materials SrTiO3 and TiO2. By using a combination of photoemission electron microscopy (PEEM) and angle-resolved photoemission (ARPES) with micrometer focus we obtain simultaneous spatial, momentum and energy-resolved information about SL WS2 on a polar (SrTiO3) and a nonpolar (TiO2) surface for the first time.

  16. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries.

    PubMed

    Liu, Wen; Oh, Pilgun; Liu, Xien; Lee, Min-Joon; Cho, Woongrae; Chae, Sujong; Kim, Youngsik; Cho, Jaephil

    2015-04-07

    High energy-density lithium-ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni-rich, lithium transition-metal oxides can deliver higher capacity at lower cost than the conventional LiCoO2 . However, for these Ni-rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni-rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.

  17. Actinide-Transition Metal heteronuclear Ions and Their Oxides: {IrUO}+ as an Analogue to Uranyl

    SciTech Connect

    Gibson, John K

    2006-01-01

    Recent theoretical calculations have shown that Ir should behave as a chemical analogue to N, with the result that IrUO{sup +}, like known NUO{sup +}, is predicted to be a stable species isoelectronic with UO{sub 2}{sup 2+}, the uranyl dication. The target heterometallic analogue to uranyl has now been prepared by direct laser desorption/ionization of a U/Ir alloy, and by oxidation of UIr{sup +} with N{sub 2}O and C{sub 2}H{sub 4}O. Properties of UIr{sup +}, UPt{sup +}, and UAu{sup +} bimetallic ions have been studied. They demonstrate direct actinide-transition metal bonding, and support the concept of autogenic isolobality.

  18. Conductivity as a Tool for Evaluating the Homogeneity of Sintered Discs of Transition Metal Oxides.

    DTIC Science & Technology

    1981-02-18

    ultrasonically to each section, and the standard Van der Pauw technique (6) was used to measure its resistivity. Excellent agreement be- * tween the resistivity...4. J. Hormadaly, et al, J. Solid State Chem. 33, 27 (1980). 5. D. Schleich, et al, Mat. Res. Bull., 12, 321 (1977). 6. L. J. Van der Pauw , Phillips

  19. Synthesis and characterization of new ternary transition metal sulfide anodes for H 2S-powered solid oxide fuel cell

    NASA Astrophysics Data System (ADS)

    Vorontsov, V.; Luo, J. L.; Sanger, A. R.; Chuang, K. T.

    A number of ternary transition metal sulfides with general composition AB 2S 4 (where A and B are different transition metal atoms) have been prepared and investigated as potential anode catalysts for use in H 2S-powered solid oxide fuel cells (SOFCs). For the initial screening, polarization resistance of the materials was measured in a two electrode symmetrical cell at 700-850 °C. Vanadium-based materials showed the lowest polarization resistance, and so were chosen for subsequent full cell tests using the configuration [H 2S, AV 2S 4/YSZ/Pt, air] (where A = Ni, Cr, Mo). MoV 2S 4 anode had superior activity and performance in the full cell setup, consistent with results from symmetrical cell tests. Polarization curves showed MoV 2S 4 had the lowest potential drop, with up to a 200 mA cm -2 current density at 800 °C. The highest power density of ca. 275 mW cm -2 at 800 °C was obtained with a pure H 2S stream. Polarization resistance of materials was a strong function of current density, and showed a sharp change of slope attributable to a change in the rate-limiting step of the anode reaction mechanism. MoV 2S 4 was chemically stable during prolonged (10 days) exposure to H 2S at 850 °C, and fuel cell performance was stable during continuous 3-day operation at 370 mA cm -2 current density.

  20. Development of biomimetic catalytic oxidation methods and non-salt methods using transition metal-based acid and base ambiphilic catalysts.

    PubMed

    Murahashi, Shun-Ichi

    2011-01-01

    This review focuses on the development of ruthenium and flavin catalysts for environmentally benign oxidation reactions based on mimicking the functions of cytochrome P-450 and flavoenzymes, and low valent transition-metal catalysts that replace conventional acids and bases. Several new concepts and new types of catalytic reactions based on these concepts are described. (Communicated by Ryoji Noyori, M.J.A.).

  1. Functionalization of the semiconductor surfaces of diamond (100), Si (100), and Ge (100) by cycloaddition of transition metal oxides: a theoretical prediction.

    PubMed

    Xu, Yi-Jun; Fu, Xianzhi

    2009-09-01

    The viability of functionalization of the semiconductor surfaces of diamond (100), Si (100), and Ge (100) by traditional [3 + 2] cycloaddition of transition metal oxides has been predicted using effective cluster models in the framework of density functional theory. The cycloaddition of transition metal oxides (OsO(4), RuO(4), and MnO(4)(-)) onto the X (100) (X = C, Si, and Ge) surface is much more facile than that of other molecular analogues including ethylene, fullerene, and single-walled carbon nanotubes because of the high reactivity of surface dimers of X (100). Our computational results demonstrate the plausibility that the well-known [3 + 2] cycloaddition of transition metal oxides to alkenes in organic chemistry can be employed as a new type of surface reaction to functionalize the semiconductor X (100) surface, which offers the new possibility for self-assembly or chemical functionalization of X (100) at low temperature. More importantly, the chemical functionalization of X (100) by cycloaddition of transition metal oxides provides the molecular basis for preparation of semiconductor-supported catalysts but also strongly advances the concept of using organic reactions to modify the solid surface, particularly to modify the semiconductor C (100), Si (100), and Ge (100) surfaces for target applications in numerous fields such as microelectronics and heterogeneous photocatalysis.

  2. Development of biomimetic catalytic oxidation methods and non-salt methods using transition metal-based acid and base ambiphilic catalysts

    PubMed Central

    MURAHASHI, Shun-Ichi

    2011-01-01

    This review focuses on the development of ruthenium and flavin catalysts for environmentally benign oxidation reactions based on mimicking the functions of cytochrome P-450 and flavoenzymes, and low valent transition-metal catalysts that replace conventional acids and bases. Several new concepts and new types of catalytic reactions based on these concepts are described. PMID:21558760

  3. Recent progress in high performance and reliable n-type transition metal oxide-based thin film transistors

    NASA Astrophysics Data System (ADS)

    Kwon, Jang Yeon; Kyeong Jeong, Jae

    2015-02-01

    This review gives an overview of the recent progress in vacuum-based n-type transition metal oxide (TMO) thin film transistors (TFTs). Several excellent review papers regarding metal oxide TFTs in terms of fundamental electron structure, device process and reliability have been published. In particular, the required field-effect mobility of TMO TFTs has been increasing rapidly to meet the demands of the ultra-high-resolution, large panel size and three dimensional visual effects as a megatrend of flat panel displays, such as liquid crystal displays, organic light emitting diodes and flexible displays. In this regard, the effects of the TMO composition on the performance of the resulting oxide TFTs has been reviewed, and classified into binary, ternary and quaternary composition systems. In addition, the new strategic approaches including zinc oxynitride materials, double channel structures, and composite structures have been proposed recently, and were not covered in detail in previous review papers. Special attention is given to the advanced device architecture of TMO TFTs, such as back-channel-etch and self-aligned coplanar structure, which is a key technology because of their advantages including low cost fabrication, high driving speed and unwanted visual artifact-free high quality imaging. The integration process and related issues, such as etching, post treatment, low ohmic contact and Cu interconnection, required for realizing these advanced architectures are also discussed.

  4. [Deactivation by SO2 of transition metal oxides modified low-temperature SCR catalyst for NOx reduction with NH3].

    PubMed

    Shen, Bo-xiong; Liu, Ting; Yang, Ting-ting; Xiong, Li-xian; Wang, Jing

    2009-08-15

    MnOx-CeOx/ACF catalyst was prepared by impregnation method, which exhibited high activity for low-temperature selective catalytic reduction of NOx over the temperature range 110-230 degrees C. Experiments results indicated that the catalyst yielded 80% NO conversion at 150 degrees C and 90% at 230 degrees C. The Oxides of Fe,Cu and V were added to the catalysts based on MnOx-CeOx/ACF. The additions of these transition metal oxides had a negative effect on the activity of the catalysts. Compared with MnOx-CeOx/ACF and Cu and V modified catalysts, NO conversion for Fe-MnOx-CeOx/ACF catalyst leveled off at nearly 75% in the first 6 h in the presence of SO2. Two mechanisms of catalyst deactivation by SO2 were discovered by the methods of X-ray photoelectron spectrum (XPS) and Fourier transform infrared spectra (FTIR), indicating that the catalysts were covered by ammonium sulfates and the metal oxides, acting as active components, were also sulfated by SO2 to form metal sulfates.

  5. Superconductors and Complex Transition Metal Oxides for Tunable THz Plasmonic Metamaterials

    SciTech Connect

    Singh, Ranjan; Xiong, Jie; Azad, Md A.; Yang, Hao; Trugman, Stuart A.; Jia, Quanxi; Taylor, Antoinette; Chen, Houtong

    2012-07-13

    The outline of this presentation are: (1) Motivation - Non-tunability of metal metamaterials; (2) Superconductors for temperature tunable metamaterials; (3) Ultrafast optical switching in superconductor metamaterials; (4) Controlling the conductivity with infrared pump beam; (5) Complex metal oxides as active substrates - Strontium Titanate; and (6) Conclusion. Conclusions are: (1) High Tc superconductors good for tunable and ultrafast metamaterials; (2) Large frequency and amplitude tunability in ultrathin superconductor films; (3) Such tunable properties cannot be accessed using metals; (4) Complex metal oxides can be used as active substrates - large tunability; (5) Complex oxides fail to address the issue of radiation losses in THz metamaterials.

  6. Storage capacity and oxygen mobility in mixed oxides from transition metals promoted by cerium

    NASA Astrophysics Data System (ADS)

    Perdomo, Camilo; Pérez, Alejandro; Molina, Rafael; Moreno, Sonia

    2016-10-01

    The oxygen mobility and storage capacity of Ce-Co/Cu-MgAl or Ce-MgAl mixed oxides, obtained by hydrotalcite precursors, were evaluated using Toluene-temperature-programmed-reaction, 18O2 isotopic exchange and O2-H2 titration. The presence of oxygen vacancies-related species was evaluated by means of Electron Paramagnetic Resonance. A correlation was found between the studied properties and the catalytic activity of the oxides in total oxidation processes. It was evidenced that catalytic activity depends on two related processes: the facility with which the solid can be reduced and its ability to regenerate itself in the presence of molecular oxygen in the gas phase. These processes are enhanced by Cu-Co cooperative effect in the mixed oxides. Additionally, the incorporation of Ce in the Co-Cu catalysts improved their oxygen transport properties.

  7. Water oxidation using earth-abundant transition metal catalysts: opportunities and challenges.

    PubMed

    Kärkäs, Markus D; Åkermark, Björn

    2016-10-07

    Catalysts for the oxidation of H2O are an integral component of solar energy to fuel conversion technologies. Although catalysts based on scarce and precious metals have been recognized as efficient catalysts for H2O oxidation, catalysts composed of inexpensive and earth-abundant element(s) are essential for realizing economically viable energy conversion technologies. This Perspective summarizes recent advances in the field of designing homogeneous water oxidation catalysts (WOCs) based on Mn, Fe, Co and Cu. It reviews the state of the art catalysts, provides insight into their catalytic mechanisms and discusses future challenges in designing bioinspired catalysts based on earth-abundant metals for the oxidation of H2O.

  8. Recent Advances in Modeling Transition Metal Oxides for Photo-electrochemistry

    NASA Astrophysics Data System (ADS)

    Caspary Toroker, Maytal

    Computational research offers a wide range of opportunities for materials science and engineering, especially in the energy arena where there is a need for understanding how material composition and structure control energy conversion, and for designing materials that could improve conversion efficiency. Potential inexpensive materials for energy conversion devices are metal oxides. However, their conversion efficiency is limited by at least one of several factors: a too large band gap for efficiently absorbing solar energy, similar conduction and valence band edge characters that may lead to unfavorably high electron-hole recombination rates, a valence band edge that is not positioned well for oxidizing water, low stability, low electronic conductivity, and low surface reactivity. I will show how we model metal oxides with ab-initio methods, primarily DFT +U. Our previous results show that doping with lithium, sodium, or hydrogen could improve iron (II) oxide's electronic properties, and alloying with zinc or nickel could improve iron (II) oxide's optical properties. Furthermore, doping nickel (II) oxide with lithium could improve several key properties including solar energy absorption. In this talk I will highlight new results on our understanding of the mechanism of iron (III) oxide's surface reactivity. Our theoretical insights bring us a step closer towards understanding how to design better materials for photo-electrochemistry. References: 1. O. Neufeld and M. Caspary Toroker, ``Pt-doped Fe2O3 for enhanced water splitting efficiency: a DFT +U study'', J. Phys. Chem. C 119, 5836 (2015). 2. M. Caspary Toroker, ``Theoretical Insights into the Mechanism of Water Oxidation on Non-stoichiometric and Ti - doped Fe2O3 (0001)'', J. Phys. Chem. C, 118, 23162 (2014). This research was supported by the Morantz Energy Research Fund, the Nancy and Stephen Grand Technion Energy Program, the I-CORE Program of the Planning and Budgeting Committee, and The Israel Science

  9. Biomimetic metal-radical reactivity: aerial oxidation of alcohols, amines, aminophenols and catechols catalyzed by transition metal complexes.

    PubMed

    Chaudhuri, Phalguni; Wieghardt, Karl; Weyhermüller, Thomas; Paine, Tapan K; Mukherjee, Soumen; Mukherjee, Chandan

    2005-10-01

    The contributions of the authors to the research program 'Radicals in Enzymatic Catalysis' over the last ca. 5 years are summarized. Significant efforts were directed towards the design and testing of phenol-containing ligands for synthesizing radical-containing transition metal complexes as potential candidates for catalysis of organic substrates like alcohols, amines, aminophenols and catechols. Functional models for different copper oxidases, such as galactose oxidase, amine oxidases, phenoxazinone synthase and catechol oxidase, are reported. The copper complexes synthesized can mimic the function of the metalloenzymes galactose oxidase and amine oxidases by catalyzing the aerial oxidation of alcohols and amines. Even methanol could be oxidized, albeit with a low conversion, by a biradical-copper(II) compound. The presence of a primary kinetic isotope effect, similar to that for galactose oxidase, provides compelling evidence that H-atom abstraction from the alpha-C-atom of the substrates is the rate-limiting step. Although catechol oxidase and phenoxazinone synthase contain copper, manganese(IV) complexes containing radicals have been found to be useful to study synthetic systems and to understand the naturally occurring processes. An 'on-off' mechanism of the radicals without redox participation from the metal centers seems to be operative in the catalysis involving such metal-radical complexes.

  10. Synthesis and Characterization of Nanostructure Transition Metal Oxides Extracted from Industrial Waste (EOFD) by Hydrothermal Method

    NASA Astrophysics Data System (ADS)

    Girisun, T. C. Sabari; Babeela, C.; Vidhya, V.

    2011-10-01

    Electric oil furnace dust (EOFD) is a solid waste generated in the collection of particulate material during steelmaking process in electric and oil furnaces. Over 7 million metric tons dust produced per annum in worldwide creates deep impacts like soil, ground water and ecology pollutions. This article reports the simple one step process for the extraction of nanostructured metal oxides from the industrial waste (EOFD) for the realization of low cost solar applications. By hydrothermal technique valuable metals were obtained in the form of metal oxides. Initially the presence of metals was identified by ICP analysis. XRD analysis confirms the formation of nano structured titanium oxide (TiO) along with traces of iron oxide (Fe2O3). The surface morphology and the particle size were analyzed by SEM analysis. Thus the metal oxides derived could be helpful to reduce the burden on the environment, increase the development of the source nano material and reduce the cost of raw materials for solar cell applications.

  11. P-type conductive amorphous oxides of transition metals from solution processing

    NASA Astrophysics Data System (ADS)

    Li, Jinwang; Kaneda, Toshihiko; Tokumitsu, Eisuke; Koyano, Mikio; Mitani, Tadaoki; Shimoda, Tatsuya

    2012-07-01

    We report a series of solution-processed p-type conductive amorphous Ln-M-O (a-Ln-M-O, where M = Ru, Ir, and Ln is a lanthanide element except Ce) having low resistivities (10-3 to 10-2 Ω cm). These oxides are thermally stable to a high degree, being amorphous up to 800 °C, and processable below 400 °C. Their film surfaces are smooth on the atomic scale, and the process allows patterning simply by direct imprinting without distortion of the pattern after annealing. These properties have high potential for use in printed electronics. The electron configurations of these oxides are apparently different from existing p-type oxides.

  12. Synthesis and characterization of transition metal oxide nanotubes for photoelectrochemical hydrogen generation

    NASA Astrophysics Data System (ADS)

    Rangaraju, Raghu Raj

    Two different configurations of photo anodes based on anodic iron oxide were investigated for photo electrochemical water oxidation. Self ordered and vertically oriented array of iron oxide nanotubes was obtained by anodization of pure iron substrate in ethylene glycol based electrolyte containing 0.1 M NH4F + 3 vol% water (EGWF solution) at 50 V for 15 minutes. Annealing of the oxide nanotubes in hydrogen environment at 500 °C for 1 h resulted in predominantly hematite phase. The second type of photo anode was obtained by a two-step anodization procedure. This process resulted in a two- layered oxide structure, a top layer of nano-dendrite morphology and a bottom layer of nanoporous morphology. This electrode configuration combined the better photo catalytic properties of the nano-dendritic iron oxide and better electron transportation behavior of vertically oriented nano-channels. Annealing of these double anodized samples in acetylene environment at 550 °C for 10 minutes resulted in a mixture of maghemite and hematite phases. Photo current densities of 0.74 mA/cm2 at 0.2 VAg/AgCl and 1.8 mA/cm 2 at 0.5 VAg/AgCl were obtained under AM 1.5 illumination in 1 M KOH solution. The double anodized samples showed high photo conductivity and more negative flat band potential (-0.8 VAg/AgCl), which are the properties required for promising photo anode materials. Apart from the above work, mild steel which is 10 times less the cost of Ti is also being tested for its photoelectrochemical properties. TiO2 nanotubes synthesized and annealed in different conditions are compared for their quantum efficiency is also carried out in this work. Quantum efficiency measurements gives more reliable and photocurrent data towards photoelectrochemical applications.

  13. Oxidative addition of C--H bonds in organic molecules to transition metal centers

    SciTech Connect

    Bergman, R.G.

    1989-04-01

    Alkanes are among the most chemically inert organic molecules. They are reactive toward a limited range of reagents, such as highly energetic free radicals and strongly electrophilic and oxidizing species. This low reactivity is a consequence of the C--H bond energies in most saturated hydrocarbons. These values range from 90 to 98 kcal/mole for primary and secondary C--H bonds; in methane, the main constituent of natural gas, the C--H bond energy is 104 kcal/mole. This makes methane one of the most common but least reactive organic molecules in nature. This report briefly discusses the search for metal complexes capable of undergoing the C--H oxidative addition process allowing alkane chemistry to be more selective than that available using free radical reagents. 14 refs.

  14. Hot electron transport in a strongly correlated transition-metal oxide

    PubMed Central

    Rana, Kumari Gaurav; Yajima, Takeaki; Parui, Subir; Kemper, Alexander F.; Devereaux, Thomas P.; Hikita, Yasuyuki; Hwang, Harold Y.; Banerjee, Tamalika

    2013-01-01

    Oxide heterointerfaces are ideal for investigating strong correlation effects to electron transport, relevant for oxide-electronics. Using hot-electrons, we probe electron transport perpendicular to the La0.7Sr0.3MnO3 (LSMO)- Nb-doped SrTiO3 (Nb:STO) interface and find the characteristic hot-electron attenuation length in LSMO to be 1.48 ± 0.10 unit cells (u.c.) at −1.9 V, increasing to 2.02 ± 0.16 u.c. at −1.3 V at room temperature. Theoretical analysis of this energy dispersion reveals the dominance of electron-electron and polaron scattering. Direct visualization of the local electron transport shows different transmission at the terraces and at the step-edges. PMID:23429420

  15. Unusual magnetic phases in the strong interaction limit of two-dimensional topological band insulators in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Kargarian, Mehdi; Langari, Abdollah; Fiete, Gregory A.

    2013-03-01

    The expected phenomenology of non-interacting topological band insulators (TBI) is now largely theoretically understood. However, the fate of TBIs in the presence of interactions remains an active area of research with novel, interaction-driven topological states possible, as well as new exotic magnetic states. In this work we study the magnetic phases of an exchange Hamiltonian arising in the strong interaction limit of a Hubbard model on the honeycomb lattice whose non-interacting limit is a two-dimensional TBI recently proposed for the layered heavy transition metal oxide compound, (Li,Na)2IrO3. By a combination of analytical methods and exact diagonalization studies on finite size clusters, we map out the magnetic phase diagram of the model. We find that strong spin-orbit coupling can lead to a phase transition from an antiferromagnetic Neél state to a spiral or stripy ordered state. We also discuss the conditions under which a quantum spin liquid may appear in our model, and we compare our results with the different but related Kitaev-Heisenberg-J2-J3 model which has recently been studied in a similar context. We gratefully acknowledge financial support from ARO Grant No. W911NF-09-1-0527 and NSF Grant No. DMR-0955778

  16. Unusual magnetic phases in the strong interaction limit of two-dimensional topological band insulators in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Kargarian, Mehdi; Langari, Abdollah; Fiete, Gregory A.

    2012-11-01

    The expected phenomenology of noninteracting topological band insulators (TBIs) is now largely theoretically understood. However, the fate of TBIs in the presence of interactions remains an active area of research with novel, interaction-driven topological states possible, as well as new exotic magnetic states. In this work we study the magnetic phases of an exchange Hamiltonian arising in the strong interaction limit of a Hubbard model on the honeycomb lattice whose noninteracting limit is a two-dimensional TBI recently proposed for the layered heavy transition metal oxide compound (Li,Na)2IrO3. By a combination of analytical methods and exact diagonalization studies on finite-size clusters, we map out the magnetic phase diagram of the model. We find that strong spin-orbit coupling can lead to a phase transition from an antiferromagnetic Neél state to a spiral or stripy ordered state. We also discuss the conditions under which a quantum spin liquid may appear in our model, and we compare our results with the different but related Kitaev-Heisenberg-J2-J3 model which has recently been studied in a similar context.

  17. A systematic study of (25)Mg NMR in paramagnetic transition metal oxides: applications to Mg-ion battery materials.

    PubMed

    Lee, Jeongjae; Seymour, Ieuan D; Pell, Andrew J; Dutton, Siân E; Grey, Clare P

    2016-12-21

    Rechargeable battery systems based on Mg-ion chemistries are generating significant interest as potential alternatives to Li-ion batteries. Despite the wealth of local structural information that could potentially be gained from Nuclear Magnetic Resonance (NMR) experiments of Mg-ion battery materials, systematic (25)Mg solid-state NMR studies have been scarce due to the low natural abundance, low gyromagnetic ratio, and significant quadrupole moment of (25)Mg (I = 5/2). This work reports a combined experimental (25)Mg NMR and first principles density functional theory (DFT) study of paramagnetic Mg transition metal oxide systems Mg6MnO8 and MgCr2O4 that serve as model systems for Mg-ion battery cathode materials. Magnetic parameters, hyperfine shifts and quadrupolar parameters were calculated ab initio using hybrid DFT and compared to the experimental values obtained from NMR and magnetic measurements. We show that the rotor assisted population transfer (RAPT) pulse sequence can be used to enhance the signal-to-noise ratio in paramagnetic (25)Mg spectra without distortions in the spinning sideband manifold. In addition, the value of the predicted quadrupolar coupling constant of Mg6MnO8 was confirmed using the RAPT pulse sequence. We further apply the same methodology to study the NMR spectra of spinel compounds MgV2O4 and MgMn2O4, candidate cathode materials for Mg-ion batteries.

  18. Electronic and Magnetic Properties of Transition-Metal Oxide Nanocomposites: A Tight-Binding Modeling at Mesoscale

    NASA Astrophysics Data System (ADS)

    Tai, Yuan-Yen; Zhu, Jian-Xin

    Transition metal oxides (TMOs) exhibit many emergent phenomena ranging from high-temperature superconductivity and giant magnetoresistance to magnetism and ferroelectricity. In addition, when TMOs are interfaced with each other, new functionalities can arise, which are absent in individual components. In this talk, I will present an overview on our recent efforts in theoretical understanding of the electronic and magnetic properties TMO nanocomposites. In particular, I will introduce our recently developed tight-binding modeling of these properties arising from the interplay of competing interactions at the interfaces of planar and pillar nanocomposites. Our theoretical tool package will provide a unique capability to address the emergent phenomena in TMO nanocomposites and their mesoscale response to such effects like strain and microstructures at the interfaces, and ultimately help establish design principles of new multifunctionality with TMOs. This work was carried out under the auspices of the National Nuclear Security Administration of the U.S. Department of Energy at LANL under Contract No. DE-AC52-06NA25396, and was supported by the LANL LDRD Program.

  19. Obtaining X-ray absorption near-edge structure for transition metal oxides via the Bethe-Salpeter equation

    NASA Astrophysics Data System (ADS)

    Liang, Yufeng; Vinson, John; Pemmaraju, Sri; Shirley, Eric; Prendergast, David

    Transition metal oxides are an important class of materials featured with strongly correlated effects. Most interesting and yet to-be-unveiled physics is associated with the metal 3d orbitals, which can be probed by X-ray absorption near-edge spectroscopy. A thorough interpretation of the x-ray spectroscopy is often accompanied with first-principles simulations of structures, electronic properties and the corresponding x-ray spectra. However, the simulation for TMOs is particularly challenging with the localized 3d orbitals. Most previous studies relied on the ground-state calculations without the core-hole as a compromise. Other treated the excited atom as a charged impurity but the calculated spectra turn out to be even more deviated from experiments. Here, we present the first study for the O K-edge for several typical TMOs via solving the Bethe-Salpeter equation (BSE). We have found that electron-core-hole interactions can alter the absorption spectra significantly. Our study helps to disentangle core-hole effects from the intrinsic electron correlations and hence facilitates the development of more advanced many-electron theories.

  20. The Influence of Doping with Transition Metal Ions on the Structure and Magnetic Properties of Zinc Oxide Thin Films

    PubMed Central

    2014-01-01

    Zn1−xNixO (x = 0.03 ÷ 0.10) and Zn1−xFexO (x = 0.03 ÷ 0.15) thin films were synthesized by sol-gel method. The structure and the surface morphology of zinc oxide thin films doped with transition metal (TM) ions have been investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM). The magnetic studies were done using vibrating sample magnetometer (VSM) at room temperature. Experimental results revealed that the substitution of Ni ions in ZnO wurtzite lattice for the contents x = 0.03 ÷ 0.10 (Ni2+) leads to weak ferromagnetism of thin films. For Zn1−xFexO with x = 0.03 ÷ 0.05, the Fe3+ ions are magnetic coupling by superexchange interaction via oxygen ions in wurtzite structure. For x = 0.10 ÷ 0.15 (Fe3+) one can observe the increasing of secondary phase of ZnFe2O4 spinel. The Zn0.9Fe0.1O film shows a superparamagnetic behavior due to small crystallite sizes and the net spin magnetic moments arisen from the interaction between the iron ions through an oxygen ion in the spinel structure. PMID:24683324

  1. Detecting the Photoexcited Carrier Distribution Across GaAs/Transition Metal Oxide Interfaces by Coherent Longitudinal Acoustic Phonons.

    PubMed

    Pollock, Kevin L; Doan, Hoang Q; Rustagi, Avinash; Stanton, Christopher J; Cuk, Tanja

    2017-03-02

    A prominent architecture for solar energy conversion layers diverse materials, such as traditional semiconductors (Si, III-V) and transition metal oxides (TMOs), into a monolithic device. The efficiency with which photoexcited carriers cross each layer is critical to device performance and dependent on the electronic properties of a heterojunction. Here, by time-resolved changes in the reflectivity after excitation of an n-GaAs/p-GaAs/TMO (Co3O4, IrO2) device, we detect a photoexcited carrier distribution specific to the p-GaAs/TMO interface through its coupling to phonons in both materials. The photoexcited carriers generate two coherent longitudinal acoustic phonons (CLAPs) traveling in opposite directions, one into the TMO and the other into the p-GaAs. This is the first time a CLAP is reported to originate at a semiconductor/TMO heterojunction. Therefore, these experiments seed future modeling of the built-in electric fields, the internal Fermi level, and the photoexcited carrier density of semiconductor/TMO interfaces within multilayered heterostructures.

  2. Transition Metal-Oxide Free Perovskite Solar Cells Enabled by a New Organic Charge Transport Layer.

    PubMed

    Chang, Sehoon; Han, Ggoch Ddeul; Weis, Jonathan G; Park, Hyoungwon; Hentz, Olivia; Zhao, Zhibo; Swager, Timothy M; Gradečak, Silvija

    2016-04-06

    Various electron and hole transport layers have been used to develop high-efficiency perovskite solar cells. To achieve low-temperature solution processing of perovskite solar cells, organic n-type materials are employed to replace the metal oxide electron transport layer (ETL). Although PCBM (phenyl-C61-butyric acid methyl ester) has been widely used for this application, its morphological instability in films (i.e., aggregation) is detrimental. Herein, we demonstrate the synthesis of a new fullerene derivative (isobenzofulvene-C60-epoxide, IBF-Ep) that serves as an electron transporting material for methylammonium mixed lead halide-based perovskite (CH3NH3PbI(3-x)Cl(x)) solar cells, both in the normal and inverted device configurations. We demonstrate that IBF-Ep has superior morphological stability compared to the conventional acceptor, PCBM. IBF-Ep provides higher photovoltaic device performance as compared to PCBM (6.9% vs 2.5% in the normal and 9.0% vs 5.3% in the inverted device configuration). Moreover, IBF-Ep devices show superior tolerance to high humidity (90%) in air. By reaching power conversion efficiencies up to 9.0% for the inverted devices with IBF-Ep as the ETL, we demonstrate the potential of this new material as an alternative to metal oxides for perovskite solar cells processed in air.

  3. Supported transition-metal oxide catalysts for reduction of sulfur dioxide with hydrogen to elemental sulfur.

    PubMed

    Chen, Chun-Liang; Wang, Ching-Huei; Weng, Hung-Shan

    2004-08-01

    This work is for the purpose to find a high performance catalyst for the catalytic reduction of SO2 with H2 as a reducing agent. NiO/gamma-Al2O3 catalyst was found to be the most active catalyst among the seven gamma-Al2O3-supported metal-oxide catalysts tested. With NiO as the active species, of the supports tested, gamma-Al2O3 was the most suitable one and the optimal Ni content was 16 wt%. Using this NiO/gamma-Al2O3 catalyst, we found that the optimal feed ratio of H2/SO2 is 2:1 and the catalyst presulfided with H2 + H2S exhibits a higher performance than that pretreated with H2 or He. XRD patterns reveal that the nickel oxide experienced a transformation to Ni3S2 and NiS, and then to NiS2, the most active nickel sulfide, during the reaction process. The reason for the highest catalyst activity of 16 wt% Ni was attributed to the largest amount of NiS2. Water vapor in the feed gas reactant caused inhibition of catalyst activity, whereas H2S promoted the reduction of SO2. These phenomena were rationalized with the aid of Claus reaction.

  4. Oxygen vacancy ordering in transition-metal-oxide LaCoO3 films

    NASA Astrophysics Data System (ADS)

    Biskup, Neven; Salafranca, Juan; Mehta, Virat; Suzuki, Yuri; Pennycook, Stephen; Pantelides, Sokrates; Varela, Maria

    2013-03-01

    Oxygen vacancies in complex oxides affect the structure and the electronic and magnetic properties. Here we use atomically-resolved Z-contrast imaging, electron-energy-loss spectroscopy and densityfunctional calculations to demonstrate that ordered oxygen vacancies may act as the controlling degree of freedom for the structural, electronic, and magnetic properties of LaCoO3 thin films. We find that epitaxial strain is released through the formation of O vacancy superlattices. The O vacancies donate excess electrons to the Co d-states, resulting in ferromagnetic ordering. The appearance of Peierls-like minigaps followed by strain relaxation triggers a nonlinear rupture of the energy bands, which explains the observed insulating behavior. We conclude that oxygen vacancy ordering constitutes a degree of freedom that can be used to engineer novel behavior in complex-oxide films. Research at ORNL supported by U.S. DOE-BES, Materials Sciences and Engineering Div. and by ORNL's ShaRE User Program (DOE-BES), at UCM by the ERC Starting Inv. Award, at UC Berkeley and LBNL by BES-DMSE, at Vanderbilt by U.S DOE and the McMinn Endowment.

  5. Enhancing capacitance behaviour of CoOOH nanostructures using transition metal dopants by ambient oxidation

    PubMed Central

    Chen, Yanhui; Zhou, Junfeng; Maguire, Pierce; O’Connell, Robert; Schmitt, Wolfgang; Li, Yonghe; Yan, Zhengguang; Zhang, Yuefei; Zhang, Hongzhou

    2016-01-01

    Cobalt hydrate and doped binary Co0.9M0.1OOH (M = Ni, Mn, Fe) nanorings of 100–300 nm were fabricated in solution through a facile ambient oxidation method. A transformation from Co0.9Ni0.1(OH)2 nanodiscs to hollow Co0.9Ni0.1OOH nanorings was observed with prolonged reaction time. Core-shell nanodiscs have elemental segregation with a Co(OH)2 core and Ni(OH)2 shell. Co0.9Ni0.1OOH nanorings displayed a higher electrochemical capacitance than Mn and Fe doped nanorings materials or materials with disc-like geometries. PMID:26853105

  6. Fabrication of functional transition metal oxide and hydroxide used as catalysts and battery materials

    NASA Astrophysics Data System (ADS)

    Xu, Linping

    My research is focused on developing metal oxide and hydroxide nanomaterials which can be used as battery materials, organic transformation catalysts, and photocatalysts. This research involves studying ZnO with different morphologies as photocatalysts for phenol degradation, producing CuO as olefin epoxidation catalysts, developing V and Cu incorporated manganese oxides as cathode materials for Li-ion batteries, and fabricating alpha-nickel hydroxide for Li-air battery materials. The first part includes producing ZnO as a photocatalyst for phenol degradation. The goal of this study is the synthesis of ZnO with different morphologies using the solvothermal method. The influence of solvents has been studied in detail. Their properties and photocatalytic performances have been explored as well. The second part of the research is concerned with developing novel urchin-like CuO as an olefin epoxidation catalyst. The purpose of this study is to develop a new catalyst, CuO, for olefin epoxidation. The copper source and precipitators were optimized, and the possible self-assembly mechanism of the urchin-like morphology was proposed. The catalytic activity of CuO for olefin epoxidation was studied. The third part of this work includes developing V, Cu incorporated manganese oxide (V-Cu-OMS-2) as cathode materials for Li-ion batteries. The purpose of this project is to develop a new material with enhanced battery performance. V and Cu incorporated manganese oxide were developed using hydrothermal methods. Octahedral molecular sieve (OMS) materials show mixed valences of Mn 3+ and Mn4+, which produces novel properties in battery applications. Inexpensive starting materials make OMS materials more promising for commercial applications. How the incorporation of V and Cu affected OMS-2 materials was investigated in terms of their crystal structure, morphologies, and surface areas. The battery performance of the incorporated OMS-2 materials with different loading amounts of V

  7. Single crystal growth from separated educts and its application to lithium transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Freund, F.; Williams, S. C.; Johnson, R. D.; Coldea, R.; Gegenwart, P.; Jesche, A.

    2016-10-01

    Thorough mixing of the starting materials is the first step of a crystal growth procedure. This holds true for almost any standard technique, whereas the intentional separation of educts is considered to be restricted to a very limited number of cases. Here we show that single crystals of α-Li2IrO3 can be grown from separated educts in an open crucible in air. Elemental lithium and iridium are oxidized and transported over a distance of typically one centimeter. In contrast to classical vapor transport, the process is essentially isothermal and a temperature gradient of minor importance. Single crystals grow from an exposed condensation point placed in between the educts. The method has also been applied to the growth of Li2RuO3, Li2PtO3 and β-Li2IrO3. A successful use of this simple and low cost technique for various other materials is anticipated.

  8. Single crystal growth from separated educts and its application to lithium transition-metal oxides

    PubMed Central

    Freund, F.; Williams, S. C.; Johnson, R. D.; Coldea, R.; Gegenwart, P.; Jesche, A.

    2016-01-01

    Thorough mixing of the starting materials is the first step of a crystal growth procedure. This holds true for almost any standard technique, whereas the intentional separation of educts is considered to be restricted to a very limited number of cases. Here we show that single crystals of α-Li2IrO3 can be grown from separated educts in an open crucible in air. Elemental lithium and iridium are oxidized and transported over a distance of typically one centimeter. In contrast to classical vapor transport, the process is essentially isothermal and a temperature gradient of minor importance. Single crystals grow from an exposed condensation point placed in between the educts. The method has also been applied to the growth of Li2RuO3, Li2PtO3 and β-Li2IrO3. A successful use of this simple and low cost technique for various other materials is anticipated. PMID:27748402

  9. Synthesis, Characterization, and Catalytic Applications of Transition Metal Oxide/Carbonate Nanomaterials

    NASA Astrophysics Data System (ADS)

    Jin, Lei

    2011-12-01

    This thesis contains two parts: 1) Studies of novel synthesis methods and characterization of advanced functional manganese oxide octahedral molecular sieves (OMS) and their applications in Li/Air batteries, solvent free toluene oxidations, and ethane oxydehydrogenation (ODH) in the presence of CO2, recycling the green house gas. 2) Development of unique Ln2O2CO3 (Ln = rare earth) layered materials and ZnO/La2O2CO3 composites as clean energy biofuel catalysts. These parts are separated into five different focused topics included in this thesis. The first topic presents studies of catalytic activities of a single step synthesized gamma-MnO2 octahedral molecular sieve nano fiber in solvent free atmospheric oxidation of toluene with molecular oxygen. Solvent free atmospheric oxidation of toluene is a notoriously difficult liquid phase oxidation process due to the challenge of oxidizing sp³ hybridized carbon in inactive hydrocarbons. The synthesized gamma-MnO2 showed excellent catalytic activity and good selectivity under the mild atmospheric reflux system. Under optimized conditions, a 47.8% conversion of toluene, along with 57% selectivity of benzoic acid and 15% of benzaldehyde were obtained. The effects of reaction time, amount of catalyst and initiator, and the reusability of the catalyst were investigated. The second topic involves developing titanium containing gamma-MnO 2 (TM) hollow spheres as electrocatalysts in Li/Air Batteries. Li/air batteries have recently attracted interest because they have the largest theoretical specific energy (11,972 Wh.kg-1) among all practical electrochemical couples. In this study, unique hollow aspheric materials were prepared for the first time using a one-step synthesis method and fully characterized by various techniques. These prepared materials were found to have excellent electrocatalytic activation as cathode materials in lithium-air batteries with a very high specific capacity (up to 2.3 A.h/g of carbon). The third

  10. High Performance Ceramic Interconnect Material for Solid Oxide Fuel Cells (SOFCs): Ca- and Transition Metal-doped Yttrium Chromite

    SciTech Connect

    Yoon, Kyung J.; Stevenson, Jeffry W.; Marina, Olga A.

    2011-10-15

    The effect of transition metal substitution on thermal and electrical properties of Ca-doped yttrium chromite was investigated in relation to use as a ceramic interconnect in high temperature solid oxide fuel cells (SOFCs). 10 at% Co, 4 at% Ni, and 1 at% Cu substitution on B-site of 20 at% Ca-doped yttrium chromite led to a close match of thermal expansion coefficient (TEC) with that of 8 mol% yttria-stabilized zirconia (YSZ), and a single phase Y0.8Ca0.2Cr0.85Co0.1Ni0.04Cu0.01O3 remained stable between 25 and 1100 degree C over a wide oxygen partial pressure range. Doping with Cu significantly facilitated densification of yttrium chromite. Ni dopant improved both electrical conductivity and dimensional stability in reducing environments, likely through diminishing the oxygen vacancy formation. Substitution with Co substantially enhanced electrical conductivity in oxidizing atmosphere, which was attributed to an increase in charge carrier density and hopping mobility. Electrical conductivity of Y0.8Ca0.2Cr0.85Co0.1Ni0.04Cu0.01O3 at 900 degree C is 57 S/cm in air and 11 S/cm in fuel (pO2=5×10^-17 atm) environments. Chemical compatibility of doped yttrium chromite with other cell components was verified at the processing temperatures. Based on the chemical and dimensional stability, sinterability, and thermal and electrical properties, Y0.8Ca0.2Cr0.85Co0.1Ni0.04Cu0.01O3 is suggested as a promising SOFC ceramic interconnect to potentially overcome technical limitations of conventional acceptor-doped lanthanum chromites.

  11. Surface Charge Transfer Doping via Transition Metal Oxides for Efficient p-Type Doping of II-VI Nanostructures.

    PubMed

    Xia, Feifei; Shao, Zhibin; He, Yuanyuan; Wang, Rongbin; Wu, Xiaofeng; Jiang, Tianhao; Duhm, Steffen; Zhao, Jianwei; Lee, Shuit-Tong; Jie, Jiansheng

    2016-11-22

    Wide band gap II-VI nanostructures are important building blocks for new-generation electronic and optoelectronic devices. However, the difficulty of realizing p-type conductivity in these materials via conventional doping methods has severely handicapped the fabrication of p-n homojunctions and complementary circuits, which are the fundamental components for high-performance devices. Herein, by using first-principles density functional theory calculations, we demonstrated a simple yet efficient way to achieve controlled p-type doping on II-VI nanostructures via surface charge transfer doping (SCTD) using high work function transition metal oxides such as MoO3, WO3, CrO3, and V2O5 as dopants. Our calculations revealed that these oxides were capable of drawing electrons from II-VI nanostructures, leading to accumulation of positive charges (holes injection) in the II-VI nanostructures. As a result, Fermi levels of the II-VI nanostructures were shifted toward the valence band regions after surface modifications, along with the large enhancement of work functions. In situ ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy characterizations verified the significant interfacial charge transfer between II-VI nanostructures and surface dopants. Both theoretical calculations and electrical transfer measurements on the II-VI nanostructure-based field-effect transistors clearly showed the p-type conductivity of the nanostructures after surface modifications. Strikingly, II-VI nanowires could undergo semiconductor-to-metal transition by further increasing the SCTD level. SCTD offers the possibility to create a variety of electronic and optoelectronic devices from the II-VI nanostructures via realization of complementary doping.

  12. Hydrolysis on transition metal oxide clusters and the stabilities of M-O-M bridges.

    PubMed

    Johnson, J R; Panas, I

    2000-07-24

    Water addition to molecular single, double and triple M-O-M bridges (M = Sc, Ti, V, Cr, and Mn) were considered, and the stabilities toward stepwise hydrolysis of the oxygen bridges were studied by means of quantum chemistry. The M-O bond distances for the studied systems were compared to experiment for demonstration of the applicability of the B3LYP functional to the investigated systems. While substantial exothermicities were found for the hydrolysis of double and triple M-O-M bridges, addition of water to a single bridge was generally found to be slightly endothermic. The lack of enthalpy drive for the (OH)yOxM-O-MOx(OH)y + H2O-->2MOx-1(OH)y+2 reaction was taken to suggest that entropy increase and the formation of mononuclear water complexe, would be decisive factors for the dissociation. A mechanism was proposed for the observed erosion of the protective chromium oxide scale on high-temperature alloys at elevated temperatures and high humidities, based on the formation of CrO2(OH)2(g).

  13. Approach to multifunctional device platform with epitaxial graphene on transition metal oxide

    PubMed Central

    Park, Jeongho; Back, Tyson; Mitchel, William C.; Kim, Steve S.; Elhamri, Said; Boeckl, John; Fairchild, Steven B.; Naik, Rajesh; Voevodin, Andrey A.

    2015-01-01

    Heterostructures consisting of two-dimensional materials have shown new physical phenomena, novel electronic and optical properties, and new device concepts not observed in bulk material systems or purely three dimensional heterostructures. These new effects originated mostly from the van der Waals interaction between the different layers. Here we report that a new optical and electronic device platform can be provided by heterostructures of 2D graphene with a metal oxide (TiO2). Our novel direct synthesis of graphene/TiO2 heterostructure is achieved by C60 deposition on transition Ti metal surface using a molecular beam epitaxy approach and O2 intercalation method, which is compatible with wafer scale growth of heterostructures. As-grown heterostructures exhibit inherent photosensitivity in the visible light spectrum with high photo responsivity. The photo sensitivity is 25 times higher than that of reported graphene photo detectors. The improved responsivity is attributed to optical transitions between O 2p orbitals in the valence band of TiO2 and C 2p orbitals in the conduction band of graphene enabled by Coulomb interactions at the interface. In addition, this heterostructure provides a platform for realization of bottom gated graphene field effect devices with graphene and TiO2 playing the roles of channel and gate dielectric layers, respectively. PMID:26395160

  14. STUDY MAGNETIC EXCITATIONS IN DOPED TRANSITION METAL OXIDES USING INELASTIC NEUTRON SCATTERING

    SciTech Connect

    Dai, Pengcheng

    2014-02-18

    Understanding the interplay between magnetism and superconductivity continues to be a “hot” topic in modern condensed matter physics. The discovery of high-temperature superconductivity in iron-based materials in 2008 provided an unique opportunity to compare and contrast these materials with traditional high-Tc copper oxide superconductors. Neutron scattering plays an important role in determining the dynamical spin properties in these materials. This proposal is a continuation of previous DOE supported proposal. This report summarizes the final progress we have made over from May 2005 till Aug. 2013. Overall, we continue to carry out extensive neutron scattering experiments on Fe-based materials, focusing on understanding their magnetic properties. In addition, we have established a materials laboratory at UT that has allowed us to grow these superconductors. Because neutron scattering typically demands a large amount of samples, by growing these materials in our own laboratory, we can now pursuit neutron scattering experiments over the entire electronic phase diagram, focusing on regions of interests. The material synthesis laboratory at UT was established entirely with the support of DOE funding. This not only allowed us to carry out neutron scattering experiments, but also permit us to provide samples to other US/International collaborators for studying these materials.

  15. Transition metal sulfide loaded catalyst

    DOEpatents

    Maroni, V.A.; Iton, L.E.; Pasterczyk, J.W.; Winterer, M.; Krause, T.R.

    1994-04-26

    A zeolite-based catalyst is described for activation and conversion of methane. A zeolite support includes a transition metal (Mo, Cr or W) sulfide disposed within the micropores of the zeolite. The catalyst allows activation and conversion of methane to C[sub 2]+ hydrocarbons in a reducing atmosphere, thereby avoiding formation of oxides of carbon.

  16. Transition metal sulfide loaded catalyst

    DOEpatents

    Maroni, Victor A.; Iton, Lennox E.; Pasterczyk, James W.; Winterer, Markus; Krause, Theodore R.

    1994-01-01

    A zeolite based catalyst for activation and conversion of methane. A zeolite support includes a transition metal (Mo, Cr or W) sulfide disposed within the micropores of the zeolite. The catalyst allows activation and conversion of methane to C.sub.2 + hydrocarbons in a reducing atmosphere, thereby avoiding formation of oxides of carbon.

  17. Synthesis and characterization of three-dimensional transition metal ions doped zinc oxide based dilute magnetic semiconductor thin films

    NASA Astrophysics Data System (ADS)

    Samanta, Kousik

    Magnetic Polaron (BMP) model. The Resistivity of ZCO sample (˜ 103 O-cm) dropped by 5 orders of magnitude (0.02 O-cm) in Co, Al co-doped samples and the carrier concentrations increases 4 orders of magnitude (˜ 1019/cm3). The Cu2+ doped ZnO thin films showed the ferromagnetic property at 300K. The p-d orbital mixing of high spin Cu2+ (d9) state with the nearest neighbor oxygen p-orbital can explain the origin of RTFM in Zn 1-xCuxO thin films. The optical transmission spectroscopy and the photoluminescence spectroscopy analysis were used to understand the electronic band structure, near band edge (NBE) transition, and the excitonic behavior in ZnO and Zn1-xTMxO thin films. We have found the reduction of NBE transition at 300K due to the substitution of Co and Cu in ZnO host lattice. This narrowing of the optical band gap (NBE) is due to the sp-d exchange interaction between the d electrons of transition metal ions and the band electrons of ZnO; the strength of this interaction strongly depends on the number of d electrons. The s-d and p-d exchanges give rise to negative and positive corrections to the conduction and valance band edges respectively, leading to the NBE narrowing. We have observed the characteristic inter atomic d-d transitions in Co doped samples; thus confirming the substitution of Co2+ in the tetrahedral site in ZnO. The low temperature (77K) PL spectrum showed the basic excitonic characteristics of pure ZnO in Zn1-xTMxO thin films. The X-ray photoelectron spectroscopy (XPS) showed that the Co and Cu are normally in 2+ oxidation state, but in the case of higher Cu concentrations (>3%), the mixed state of Cu2+ and Cu1+ were detected.

  18. Transition-metal-free oxidative carboazidation of acrylamides via cascade C-N and C-C bond-forming reactions.

    PubMed

    Qiu, Jun; Zhang, Ronghua

    2014-07-07

    A novel transition-metal-free oxidative carboazidation of acrylamides using inexpensive NaN3 and K2S2O8 was achieved, which not only provided an efficient method to prepare various N3-substituted oxindoles, but also represented a novel strategy for C-N and C-C bond formation via a free-radical cascade process. This transformation exhibits excellent functional group tolerance, affording the desired oxindoles in good to excellent yields.

  19. Technologies for deposition of transition metal oxide thin films: application as functional layers in “Smart windows” and photocatalytic systems

    NASA Astrophysics Data System (ADS)

    Gesheva, K.; Ivanova, T.; Bodurov, G.; Szilágyi, I. M.; Justh, N.; Kéri, O.; Boyadjiev, S.; Nagy, D.; Aleksandrova, M.

    2016-02-01

    “Smart windows” are envisaged for future low-energy, high-efficient architectural buildings, as well as for the car industry. By switching from coloured to fully bleached state, these windows regulate the energy of solar flux entering the interior. Functional layers in these devices are the transition metals oxides. The materials (transitional metal oxides) used in smart windows can be also applied as photoelectrodes in water splitting photocells for hydrogen production or as photocatalytic materials for self-cleaning surfaces, waste water treatment and pollution removal. Solar energy utilization is recently in the main scope of numerous world research laboratories and energy organizations, working on protection against conventional fuel exhaustion. The paper presents results from research on transition metal oxide thin films, fabricated by different methods - atomic layer deposition, atmospheric pressure chemical vapour deposition, physical vapour deposition, and wet chemical methods, suitable for flowthrough production process. The lower price of the chemical deposition processes is especially important when the method is related to large-scale glazing applications. Conclusions are derived about which processes are recently considered as most prospective, related to electrochromic materials and devices manufacturing.

  20. Benchmark Calculations of Energetic Properties of Groups 4 and 6 Transition Metal Oxide Nanoclusters Including Comparison to Density Functional Theory.

    PubMed

    Fang, Zongtang; Both, Johan; Li, Shenggang; Yue, Shuwen; Aprà, Edoardo; Keçeli, Murat; Wagner, Albert F; Dixon, David A

    2016-08-09

    The heats of formation and the normalized clustering energies (NCEs) for the group 4 and group 6 transition metal oxide (TMO) trimers and tetramers have been calculated by the Feller-Peterson-Dixon (FPD) method. The heats of formation predicted by the FPD method do not differ much from those previously derived from the NCEs at the CCSD(T)/aT level except for the CrO3 nanoclusters. New and improved heats of formation for Cr3O9 and Cr4O12 were obtained using PW91 orbitals instead of Hartree-Fock (HF) orbitals. Diffuse functions are necessary to predict accurate heats of formation. The fluoride affinities (FAs) are calculated with the CCSD(T) method. The relative energies (REs) of different isomers, NCEs, electron affinities (EAs), and FAs of (MO2)n (M = Ti, Zr, Hf, n = 1-4) and (MO3)n (M = Cr, Mo, W, n = 1-3) clusters have been benchmarked with 55 exchange-correlation density functional theory (DFT) functionals including both pure and hybrid types. The absolute errors of the DFT results are mostly less than ±10 kcal/mol for the NCEs and the EAs and less than ±15 kcal/mol for the FAs. Hybrid functionals usually perform better than the pure functionals for the REs and NCEs. The performance of the two types of functionals in predicting EAs and FAs is comparable. The B1B95 and PBE1PBE functionals provide reliable energetic properties for most isomers. Long range corrected pure functionals usually give poor FAs. The standard deviation of the absolute error is always close to the mean errors, and the probability distributions of the DFT errors are often not Gaussian (normal). The breadth of the distribution of errors and the maximum probability are dependent on the energy property and the isomer.

  1. Transition metal substituted SrTiO3 perovskite oxides as promising functional materials for oxygen sensor

    NASA Astrophysics Data System (ADS)

    Misra, Sunasira

    2012-07-01

    Modern industries employ several gases as process fluids. Leakage of these gases in the operating area could lead to undesirable consequences. Even in chemical industries, which use large quantities of inert gases in confined areas, accidental leakage of these process gases would result in the reduction of oxygen partial pressure in atmospheric air. For instance, large amounts of gaseous nitrogen and argon are used in pharmaceutical industries, gas filling/bottling plants, operating area of Fast Breeder reactors, etc. Fall of concentration of oxygen in air below 17% could lead to life risk (Asphyxiation) of the working personnel that has to be checked well in advance. Further, when the leaking gas is of explosive nature, its damage potential would be very high if its concentration level in air increases beyond its lower explosive limit. Surveillance of the ambient within these industries at the critical areas and also in the environment around them for oxygen therefore becomes highly essential. Sensitive and selective gas sensors made of advanced materials are required to meet this demand of monitoring environmental pollution. The perovskite class of oxides (ABO3) is chemically stable even at high temperatures and can tolerate large levels of dopants without phase transformations. The electronic properties of this parent functional material can be tailored by adding appropriate dopants that exhibit different valence states. Aliovalent transition metal substituted SrTiO3 perovskites are good mixed ionic and electronic conductors and potential candidates for sensing oxygen at percentage level exploiting their oxygen pressure dependent electrical conductivity. This paper presents the preparation, study of electrical conductivity and oxygen-sensing characteristics of iron and cobalt substituted SrTiO3.

  2. Benchmark Calculations of Energetic Properties of Groups 4 and 6 Transition Metal Oxide Nanoclusters Including Comparison to Density Functional Theory

    SciTech Connect

    Fang, Zongtang; Both, Johan; Li, Shenggang; Yue, Shuwen; Aprà, Edoardo; Keçeli, Murat; Wagner, Albert F.; Dixon, David A.

    2016-08-09

    The heats of formation and the normalized clustering energies (NCEs) for the group 4 and group 6 transition metal oxide (TMO) trimers and tetramers have been calculated by the Feller-Peterson-Dixon (FPD) method. The heats of formation predicted by the FPD method do not differ much from those previously derived from the NCEs at the CCSD(T)/aT level except for the CrO3 nanoclusters. New and improved heats of formation for Cr3O9 and Cr4O12 were obtained using PW91 orbitals instead of Hartree-Fock (HF) orbitals. Diffuse functions are necessary to predict accurate heats of formation. The fluoride affinities (FAs) are calculated with the CCSD(T) method. The relative energies (REs) of different isomers, NCEs, electron affinities (EAs), and FAs of (MO2)n ( M = Ti, Zr, Hf, n = 1 – 4 ) and (MO3)n ( M = Cr, Mo, W, n = 1 – 3) clusters have been benchmarked with 55 exchange-correlation DFT functionals including both pure and hybrid types. The absolute errors of the DFT results are mostly less than ±10 kcal/mol for the NCEs and the EAs, and less than ±15 kcal/mol for the FAs. Hybrid functionals usually perform better than the pure functionals for the REs and NCEs. The performance of the two types of functionals in predicting EAs and FAs is comparable. The B1B95 and PBE1PBE functionals provide reliable energetic properties for most isomers. Long range corrected pure functionals usually give poor FAs. The standard deviation of the absolute error is always close to the mean errors and the probability distributions of the DFT errors are often not Gaussian (normal). The breadth of the distribution of errors and the maximum probability are dependent on the energy property and the isomer.

  3. Covalent bonds against magnetism in transition metal compounds.

    PubMed

    Streltsov, Sergey V; Khomskii, Daniel I

    2016-09-20

    Magnetism in transition metal compounds is usually considered starting from a description of isolated ions, as exact as possible, and treating their (exchange) interaction at a later stage. We show that this standard approach may break down in many cases, especially in 4d and 5d compounds. We argue that there is an important intersite effect-an orbital-selective formation of covalent metal-metal bonds that leads to an "exclusion" of corresponding electrons from the magnetic subsystem, and thus strongly affects magnetic properties of the system. This effect is especially prominent for noninteger electron number, when it results in suppression of the famous double exchange, the main mechanism of ferromagnetism in transition metal compounds. We study this mechanism analytically and numerically and show that it explains magnetic properties of not only several 4d-5d materials, including Nb2O2F3 and Ba5AlIr2O11, but can also be operative in 3d transition metal oxides, e.g., in CrO2 under pressure. We also discuss the role of spin-orbit coupling on the competition between covalency and magnetism. Our results demonstrate that strong intersite coupling may invalidate the standard single-site starting point for considering magnetism, and can lead to a qualitatively new behavior.

  4. Covalent bonds against magnetism in transition metal compounds

    PubMed Central

    Streltsov, Sergey V.; Khomskii, Daniel I.

    2016-01-01

    Magnetism in transition metal compounds is usually considered starting from a description of isolated ions, as exact as possible, and treating their (exchange) interaction at a later stage. We show that this standard approach may break down in many cases, especially in 4d and 5d compounds. We argue that there is an important intersite effect—an orbital-selective formation of covalent metal–metal bonds that leads to an “exclusion” of corresponding electrons from the magnetic subsystem, and thus strongly affects magnetic properties of the system. This effect is especially prominent for noninteger electron number, when it results in suppression of the famous double exchange, the main mechanism of ferromagnetism in transition metal compounds. We study this mechanism analytically and numerically and show that it explains magnetic properties of not only several 4d–5d materials, including Nb2O2F3 and Ba5AlIr2O11, but can also be operative in 3d transition metal oxides, e.g., in CrO2 under pressure. We also discuss the role of spin–orbit coupling on the competition between covalency and magnetism. Our results demonstrate that strong intersite coupling may invalidate the standard single-site starting point for considering magnetism, and can lead to a qualitatively new behavior. PMID:27601669

  5. Method for dry etching of transition metals

    DOEpatents

    Ashby, C.I.H.; Baca, A.G.; Esherick, P.; Parmeter, J.E.; Rieger, D.J.; Shul, R.J.

    1998-09-29

    A method for dry etching of transition metals is disclosed. The method for dry etching of a transition metal (or a transition metal alloy such as a silicide) on a substrate comprises providing at least one nitrogen- or phosphorus-containing {pi}-acceptor ligand in proximity to the transition metal, and etching the transition metal to form a volatile transition metal/{pi}-acceptor ligand complex. The dry etching may be performed in a plasma etching system such as a reactive ion etching (RIE) system, a downstream plasma etching system (i.e. a plasma afterglow), a chemically-assisted ion beam etching (CAIBE) system or the like. The dry etching may also be performed by generating the {pi}-acceptor ligands directly from a ligand source gas (e.g. nitrosyl ligands generated from nitric oxide), or from contact with energized particles such as photons, electrons, ions, atoms, or molecules. In some preferred embodiments of the present invention, an intermediary reactant species such as carbonyl or a halide ligand is used for an initial chemical reaction with the transition metal, with the intermediary reactant species being replaced at least in part by the {pi}-acceptor ligand for forming the volatile transition metal/{pi}-acceptor ligand complex.

  6. Method for dry etching of transition metals

    DOEpatents

    Ashby, Carol I. H.; Baca, Albert G.; Esherick, Peter; Parmeter, John E.; Rieger, Dennis J.; Shul, Randy J.

    1998-01-01

    A method for dry etching of transition metals. The method for dry etching of a transition metal (or a transition metal alloy such as a silicide) on a substrate comprises providing at least one nitrogen- or phosphorous-containing .pi.-acceptor ligand in proximity to the transition metal, and etching the transition metal to form a volatile transition metal/.pi.-acceptor ligand complex. The dry etching may be performed in a plasma etching system such as a reactive ion etching (RIE) system, a downstream plasma etching system (i.e. a plasma afterglow), a chemically-assisted ion beam etching (CAIBE) system or the like. The dry etching may also be performed by generating the .pi.-acceptor ligands directly from a ligand source gas (e.g. nitrosyl ligands generated from nitric oxide), or from contact with energized particles such as photons, electrons, ions, atoms, or molecules. In some preferred embodiments of the present invention, an intermediary reactant species such as carbonyl or a halide ligand is used for an initial chemical reaction with the transition metal, with the intermediary reactant species being replaced at least in part by the .pi.-acceptor ligand for forming the volatile transition metal/.pi.-acceptor ligand complex.

  7. Enhanced spin-phonon-electronic coupling in a 5d oxide

    PubMed Central

    Calder, S.; Lee, J. H.; Stone, M. B.; Lumsden, M. D.; Lang, J. C.; Feygenson, M.; Zhao, Z.; Yan, J.-Q.; Shi, Y. G.; Sun, Y. S.; Tsujimoto, Y.; Yamaura, K.; Christianson, A. D.

    2015-01-01

    Enhanced coupling of material properties offers new fundamental insights and routes to multifunctional devices. In this context 5d oxides provide new paradigms of cooperative interactions that drive novel emergent behaviour. This is exemplified in osmates that host metal–insulator transitions where magnetic order appears intimately entwined. Here we consider such a material, the 5d perovskite NaOsO3, and observe a coupling between spin and phonon manifested in a frequency shift of 40 cm−1, the largest measured in any material. The anomalous modes are shown to involve solely Os–O interactions and magnetism is revealed as the driving microscopic mechanism for the phonon renormalization. The magnitude of the coupling in NaOsO3 is primarily due to a property common to all 5d materials: the large spatial extent of the ion. This allows magnetism to couple to phonons on an unprecedented scale and in general offers multiple new routes to enhanced coupled phenomena in 5d materials. PMID:26608626

  8. Enhanced spin-phonon-electronic coupling in a 5d oxide

    DOE PAGES

    Calder, Stuart A.; Yamaura, K.; Tsujimoto, Y.; ...

    2015-11-26

    Enhanced coupling of material properties offers new fundamental insights and routes to multifunctional devices. In this context 5d oxides provide new paradigms of cooperative interactions that drive novel emergent behaviour. This is exemplified in osmates that host metal insulator transitions where magnetic order appears intimately entwined. Here we consider such a material, the 5d perovskite NaOsO3, and observe a coupling between spin and phonon manifested in a frequency shift of 40 cm 1, the largest measured in any material. The anomalous modes are shown to involve solely Os O interactions and magnetism is revealed as the driving microscopic mechanism formore » the phonon renormalization. The magnitude of the coupling in NaOsO3 is primarily due to a property common to all 5d materials: the large spatial extent of the ion. This allows magnetism to couple to phonons on an unprecedented scale and in general offers multiple new routes to enhanced coupled phenomena in 5d materials.« less

  9. Enhanced spin-phonon-electronic coupling in a 5d oxide

    SciTech Connect

    Calder, Stuart A.; Yamaura, K.; Tsujimoto, Y.; Sun, Y. S.; Stone, Matthew B.; Shi, Y. G.; Lang, Jonathan; Christianson, Andrew D.; Lumsden, Mark D.; Lee, Jun Hee; Feygenson, Mikhail; Zhao, Zhiying; Yan, Jiaqiang

    2015-11-26

    Enhanced coupling of material properties offers new fundamental insights and routes to multifunctional devices. In this context 5d oxides provide new paradigms of cooperative interactions that drive novel emergent behaviour. This is exemplified in osmates that host metal insulator transitions where magnetic order appears intimately entwined. Here we consider such a material, the 5d perovskite NaOsO3, and observe a coupling between spin and phonon manifested in a frequency shift of 40 cm 1, the largest measured in any material. The anomalous modes are shown to involve solely Os O interactions and magnetism is revealed as the driving microscopic mechanism for the phonon renormalization. The magnitude of the coupling in NaOsO3 is primarily due to a property common to all 5d materials: the large spatial extent of the ion. This allows magnetism to couple to phonons on an unprecedented scale and in general offers multiple new routes to enhanced coupled phenomena in 5d materials.

  10. Accurate electronic and chemical properties of 3d transition metal oxides using a calculated linear response U and a DFT + U(V) method.

    PubMed

    Xu, Zhongnan; Joshi, Yogesh V; Raman, Sumathy; Kitchin, John R

    2015-04-14

    We validate the usage of the calculated, linear response Hubbard U for evaluating accurate electronic and chemical properties of bulk 3d transition metal oxides. We find calculated values of U lead to improved band gaps. For the evaluation of accurate reaction energies, we first identify and eliminate contributions to the reaction energies of bulk systems due only to changes in U and construct a thermodynamic cycle that references the total energies of unique U systems to a common point using a DFT + U(V) method, which we recast from a recently introduced DFT + U(R) method for molecular systems. We then introduce a semi-empirical method based on weighted DFT/DFT + U cohesive energies to calculate bulk oxidation energies of transition metal oxides using density functional theory and linear response calculated U values. We validate this method by calculating 14 reactions energies involving V, Cr, Mn, Fe, and Co oxides. We find up to an 85% reduction of the mean average error (MAE) compared to energies calculated with the Perdew-Burke-Ernzerhof functional. When our method is compared with DFT + U with empirically derived U values and the HSE06 hybrid functional, we find up to 65% and 39% reductions in the MAE, respectively.

  11. Accurate electronic and chemical properties of 3d transition metal oxides using a calculated linear response U and a DFT + U(V) method

    SciTech Connect

    Xu, Zhongnan; Kitchin, John R.; Joshi, Yogesh V.; Raman, Sumathy

    2015-04-14

    We validate the usage of the calculated, linear response Hubbard U for evaluating accurate electronic and chemical properties of bulk 3d transition metal oxides. We find calculated values of U lead to improved band gaps. For the evaluation of accurate reaction energies, we first identify and eliminate contributions to the reaction energies of bulk systems due only to changes in U and construct a thermodynamic cycle that references the total energies of unique U systems to a common point using a DFT + U(V ) method, which we recast from a recently introduced DFT + U(R) method for molecular systems. We then introduce a semi-empirical method based on weighted DFT/DFT + U cohesive energies to calculate bulk oxidation energies of transition metal oxides using density functional theory and linear response calculated U values. We validate this method by calculating 14 reactions energies involving V, Cr, Mn, Fe, and Co oxides. We find up to an 85% reduction of the mean average error (MAE) compared to energies calculated with the Perdew-Burke-Ernzerhof functional. When our method is compared with DFT + U with empirically derived U values and the HSE06 hybrid functional, we find up to 65% and 39% reductions in the MAE, respectively.

  12. Oligocyclopentadienyl transition metal complexes

    SciTech Connect

    de Azevedo, Cristina G.; Vollhardt, K. Peter C.

    2002-01-18

    Synthesis, characterization, and reactivity studies of oligocyclopentadienyl transition metal complexes, namely those of fulvalene, tercyclopentadienyl, quatercyclopentadienyl, and pentacyclopentadienyl(cyclopentadienyl) are the subject of this account. Thermal-, photo-, and redox chemistries of homo- and heteropolynuclear complexes are described.

  13. One-step synthesis of nanocrystalline transition metal oxides on thin sheets of disordered graphitic carbon by oxidation of MXenes.

    PubMed

    Naguib, Michael; Mashtalir, Olha; Lukatskaya, Maria R; Dyatkin, Boris; Zhang, Chuanfang; Presser, Volker; Gogotsi, Yury; Barsoum, Michel W

    2014-07-18

    Herein we show that heating 2D Ti3C2 in air results in TiO2 nanocrystals enmeshed in thin sheets of disordered graphitic carbon structures that can handle extremely high cycling rates when tested as anodes in lithium ion batteries. Oxidation of 2D Ti3C2 in either CO2 or pressurized water also resulted in TiO2-C hybrid structures. Similarly, other hybrids can be produced, as we show here for Nb2O5/C from 2D Nb2C.

  14. Understanding of catalysis on early transition metal oxide-based catalysts through exploration of surface structure and chemistry during catalysis using in-situ approaches

    SciTech Connect

    Tao, Franklin

    2015-09-14

    Two main categories of heterogeneous catalysts are metal and metal oxide which catalyze 80% chemical reactions at solid-gas and solid-liquid interfaces. Metal oxide catalysts are much more complicated than metal catalysts. The reason is that the cations of the metal atoms could exhibit a few different oxidation states on surface of the same catalyst particle such as Co3O4 or change of their oxidation states under different reactive environments. For a metal catalyst, there is only one oxidation state typically. In addition, surface of a metal oxide can be terminated with multiple surface functionalities including O atoms with different binding configurations and OH group. For metal, only metal atoms are exposed typically. Obviously, the complication of surface chemistry and structure of a metal oxide makes studies of surface of an oxide catalyst very challenging. Due to the complication of surface of a meal oxide, the electronic and geometric structures of surface of a metal oxide and the exposed species have received enormous attention since oxide catalysts catalyze at least 1/3 chemical reactions in chemical and energy industries. Understanding of catalytic reactions on early transition metal oxide-based catalysts is fundamentally intriguing and of great practical interest in energy- and environment-related catalysis. Exploration of surface chemistry of oxide-based catalysts at molecular level during catalysis has remained challenging though it is critical in deeply understanding catalysis on oxide-based catalysts and developing oxide-based catalysts with high activity and selectivity. Thus, the overall objective of this project is to explore surface chemistry and structure of early transition metal oxide-based catalysts through in-situ characterization of surface of catalysts, measurements of catalytic performances, and then build an intrinsic correlation of surface chemistry and structure with their catalytic performances in a few

  15. Synthesis-microstructure-performance relationship of layered transition metal oxides as cathode for rechargeable sodium batteries prepared by high-temperature calcination.

    PubMed

    Xie, Man; Luo, Rui; Lu, Jun; Chen, Renjie; Wu, Feng; Wang, Xiaoming; Zhan, Chun; Wu, Huiming; Albishri, Hassan M; Al-Bogami, Abdullah S; El-Hady, Deia Abd; Amine, Khalil

    2014-10-08

    Research on sodium batteries has made a comeback because of concern regarding the limited resources and cost of lithium for Li-ion batteries. From the standpoint of electrochemistry and economics, Mn- or Fe-based layered transition metal oxides should be the most suitable cathode candidates for affordable sodium batteries. Herein, this paper reports a novel cathode material, layered Na1+x(Fey/2Niy/2Mn1-y)1-xO2 (x = 0.1-0.5), synthesized through a facile coprecipitation process combined with subsequent calcination. For such cathode material calcined at 800 °C for 20 h, the Na/Na1+x(Fey/2Niy/2Mn1-y)1-xO2 (x = 0.4) electrode exhibited a good capacity of 99.1 mAh g(-1) (cycled at 1.5-4.0 V) and capacity retention over 87% after 50 cycles. Optimization of this material would make layered transition metal oxides a strong candidate for the Na-ion battery cathode.

  16. α-Alkylation of ketones with primary alcohols driven by visible light and bimetallic gold and palladium nanoparticles supported on transition metal oxide

    NASA Astrophysics Data System (ADS)

    Bai, Meifen; Xin, Hui; Guo, Zhi; Guo, Dapeng; Wang, Yan; Zhao, Peng; Li, Jingyi

    2017-01-01

    The direct α-alkylation of ketones with primary alcohols to obtain the corresponding saturated coupled ketones was achieved with bimetallic gold(Au)-palladium(Pd) nanoparticles(NPs) supported on a transition metal oxide (such as CeO2). This system demonstrated a higher catalytic property than Au/CeO2 and Pd/CeO2 under visible light irradiation at 40 ± 3 °C in an Ar atmosphere. Such phenomenon was caused by the synergistic effect between Au and Pd. Isopropyl alcohol was used as the solvent and CH3ONa as the base. The effect of the bimetallic Au-Pd mass ratio and the two different transition metal oxide supports (such as CeO2 or ZrO2) during the reaction process was studied. The highest catalytic activity of those examined happened with the 1.5 wt% Au-1.5 wt% Pd (Au and Pd mass ratio 1:1)/CeO2 photo-catalyst. The intensity and wavelength of the visible light had a strong influence on the system. The catalyst can be reused for four times. A reaction mechanism was proposed for the α-alkylation of ketones with primary alcohols.

  17. Synthesis-Microstructure-Performance Relationship of Layered Transition Metal Oxides as Cathode for Rechargeable Sodium Batteries Prepared by High-Temperature Calcination

    SciTech Connect

    Xie, Man; Luo, Rui; Lu, Jun; Chen, Renjie; Wu, Feng; Wang, Xiaoming; Zhan, Chun; Wu, Huiming; Albishri, Hassan M.; Al-Bogami, Abdullah S.; El-Hady, Deia Abd; Amine, Khalil

    2014-09-05

    Research on sodium batteries has made a comeback because of concern regarding the limited resources and cost of lithium for Li-ion batteries. From the standpoint of electrochemistry and economics, Mn- or Fe-based layered transition metal oxides should be the most suitable cathode candidates for affordable sodium batteries. Herein, this paper reports a novel cathode material, layered Na1+x(Fey/2Niy/2Mn1–y)1–xO2 (x = 0.1–0.5), synthesized through a facile coprecipitation process combined with subsequent calcination. For such cathode material calcined at 800 °C for 20 h, the Na/Na1+x(Fey/2Niy/2Mn1–y)1–xO2 (x = 0.4) electrode exhibited a good capacity of 99.1 mAh g–1 (cycled at 1.5–4.0 V) and capacity retention over 87% after 50 cycles. Optimization of this material would make layered transition metal oxides a strong candidate for the Na-ion battery cathode.

  18. Symmetry Violations in Partially Oxidized One-Dimensional (1D) Transition Metal Polymers. Metal-Ligand-Metal (M-L-M) Bridged Systems

    NASA Astrophysics Data System (ADS)

    Böhm, Michael C.

    1984-09-01

    The band structure of the metal-ligand-metal (M-L-M) bridged quasi one-dimensional (1D) cyclopentadienylmanganese polymer, MnCp 1, has been studied in the unoxidized state and in a partly oxidized modification with one electron removed from each second MnCp fragment. The tight-binding approach is based on a semiempirical self-consistent-field (SCF) Hartree-Fock (HF) crystal orbital (CO) model of the INDO-type (intermediate neglect of differential overlap) combined with a statistical averaging procedure which has its origin in the grand canonical ensemble. The latter approximation allows for an efficient investigation of violations of the translation symmetries in the oxidized 1D material. The oxidation process in 1 is both ligand- and metal-centered (Mn 3d-2 states). The mean-field minimum corresponds to a charge density wave (CDW) solution with inequivalent Mn sites within the employed repeat-units. The symmetry adapted solution with electronically identical 3d centers is a maximum in the variational space. The coupling of this electronic instability to geometrical deformations is also analyzed. The ligand amplitudes encountered in the hole-state wave function prevent extremely large charge separations between the 3d centers which are found in ID systems without bridging moieties (e.g. Ni(CN)2-5 chain). The symmetry reduction in oxidized 1 is compared with violations of spatial symmetries in finite transition metal derivatives and simple solids. The stabilization of the valence bond-type (VB) solution is physically rationalized (i.e. left-right correlations between the 3d centers). The computational results derived for 1 are generalized to oxidized transition metal chains with band occupancies that are simple fractions of the number of stacking units and to 1D systems that deviate from this relation. The entropy-influence for temperatures T ≠ 0 is shortly discussed (stabilization of domain or cluster structures).

  19. Ascorbate does not act as a pro-oxidant towards lipids and proteins in human plasma exposed to redox-active transition metal ions and hydrogen peroxide.

    PubMed

    Suh, Jung; Zhu, Ben-Zhan; Frei, Balz

    2003-05-15

    The combination of ascorbate, transition metal ions, and hydrogen peroxide (H(2)O(2)) is an efficient hydroxyl radical generating system called "the Udenfriend system." Although the pro-oxidant role of ascorbate in this system has been well characterized in vitro, it is uncertain whether ascorbate also acts as a pro-oxidant under physiological conditions. To address this question, human plasma, used as a representative biological fluid, was either depleted of endogenous ascorbate with ascorbate oxidase, left untreated, or supplemented with 25 microM-1 mM ascorbate. Subsequently, the plasma samples were incubated at 37 degrees C with 50 microM-1 mM iron (from ferrous ammonium sulfate), 60 or 100 microM copper (from cupric sulfate), and/or 200 microM or 1 mM H(2)O(2). Although endogenous and added ascorbate was depleted rapidly in the presence of transition metal ions and H(2)O(2), no cholesterol ester hydroperoxides or malondialdehyde were formed, i.e., ascorbate protected against, rather than promoted, lipid peroxidation. Conversely, depletion of endogenous ascorbate was sufficient to cause lipid peroxidation, the rate and extent of which were enhanced by the addition of metal ions but not H(2)O(2). Ascorbate also did not enhance protein oxidation in plasma exposed to metal ions and H(2)O(2), as assessed by protein carbonyl formation and depletion of reduced thiols. Interestingly, neither the rate nor the extent of endogenous alpha-tocopherol oxidation in plasma was affected by any of the treatments. Our data show that even in the presence of redox-active iron or copper and H(2)O(2), ascorbate acts as an antioxidant that prevents lipid peroxidation and does not promote protein oxidation in human plasma in vitro.

  20. Ligand-Assisted Co-Assembly Approach toward Mesoporous Hybrid Catalysts of Transition-Metal Oxides and Noble Metals: Photochemical Water Splitting.

    PubMed

    Liu, Ben; Kuo, Chung-Hao; Chen, Jiejie; Luo, Zhu; Thanneeru, Srinivas; Li, Weikun; Song, Wenqiao; Biswas, Sourav; Suib, Steven L; He, Jie

    2015-07-27

    A bottom-up synthetic approach was developed for the preparation of mesoporous transition-metal-oxide/noble-metal hybrid catalysts through ligand-assisted co-assembly of amphiphilic block-copolymer micelles and polymer-tethered noble-metal nanoparticles (NPs). The synthetic approach offers a general and straightforward method to precisely tune the sizes and loadings of noble-metal NPs in metal oxides. This system thus provides a solid platform to clearly understand the role of noble-metal NPs in photochemical water splitting. The presence of trace amounts of metal NPs (≈0.1 wt %) can enhance the photocatalytic activity for water splitting up to a factor of four. The findings can conceivably be applied to other semiconductors/noble-metal catalysts, which may stand out as a new methodology to build highly efficient solar energy conversion systems.

  1. General facile approach to transition-metal oxides with highly uniform mesoporosity and their application as adsorbents for heavy-metal-ion sequestration.

    PubMed

    Seisenbaeva, Gulaim A; Daniel, Geoffrey; Kessler, Vadim G; Nedelec, Jean-Marie

    2014-08-18

    Mesoporous powders of transition-metal oxides, TiO2, ZrO2, HfO2, Nb2O5, and Ta2O5, pure from organic impurities were produced by a rapid single-step thermohydrolytic approach. The obtained materials display an impressively large active surface area and sharp pore-size distribution, being composed of partially coalesced uniform nanoparticles with crystalline cores and amorphous shells. They reveal extremely high adsorption capacity in removal of Cr(VI) anions from solutions (25.8 for TiO2, 73.0 for ZrO2, and 74.7 mg g(-1) for Nb2O5 in relation to the Cr2O7(2-) anion), making them very attractive as adsorbents in water remediation applications. The difference in adsorption capacities for the studied oxides may be explained by variation in surface hydration and surface-charge distribution.

  2. Metal-insulator transition in 3d transition-metal oxides with ABO 3 and A 2BO 4 type structures

    NASA Astrophysics Data System (ADS)

    Eisaki, H.; Ido, T.; Magoshi, K.; Mochizuki, M.; Yamatsu, H.; Ito, T.; Uchida, S.

    1991-12-01

    3d transition-metal oxides with perovskite and K 2NiF 4 crystal structures, (La,Sr)VO 3, (La,Sr)FeO 3, (La,Sr)CoO 3, LaNiO 3 and (La,Sr) 2NiO 4 systems are investigated focusing on the effect of carrier doping performed by the A-site ion substitution. Both (La,Sr)VO 3 and (La,Sr)CoO 3 systems show an insulator to metal transition by Sr substitution, however, the magnetic behavior differs drastically. The mid-infrared structure induced by Sr substitution is observed in the optical spectra of (La,Sr) 2NiO 4 system. Relation between the behavior of metal-insulator transition and the variation of the electronic and/or spin structure in these systems is discussed in comparison with the high-T c copper oxides.

  3. Consistent LDA' + DMFT approach to the electronic structure of transition metal oxides: Charge transfer insulators and correlated metals

    SciTech Connect

    Nekrasov, I. A. Pavlov, N. S.; Sadovskii, M. V.

    2013-04-15

    We discuss the recently proposed LDA' + DMFT approach providing a consistent parameter-free treatment of the so-called double counting problem arising within the LDA + DMFT hybrid computational method for realistic strongly correlated materials. In this approach, the local exchange-correlation portion of the electron-electron interaction is excluded from self-consistent LDA calculations for strongly correlated electronic shells, e.g., d-states of transition metal compounds. Then, the corresponding double-counting term in the LDA' + DMFT Hamiltonian is consistently set in the local Hartree (fully localized limit, FLL) form of the Hubbard model interaction term. We present the results of extensive LDA' + DMFT calculations of densities of states, spectral densities, and optical conductivity for most typical representatives of two wide classes of strongly correlated systems in the paramagnetic phase: charge transfer insulators (MnO, CoO, and NiO) and strongly correlated metals (SrVO{sub 3} and Sr{sub 2}RuO{sub 4}). It is shown that for NiO and CoO systems, the LDA' + DMFT approach qualitatively improves the conventional LDA + DMFT results with the FLL type of double counting, where CoO and NiO were obtained to be metals. Our calculations also include transition-metal 4s-states located near the Fermi level, missed in previous LDA + DMFT studies of these monoxides. General agreement with optical and the X-ray experiments is obtained. For strongly correlated metals, the LDA' + DMFT results agree well with the earlier LDA + DMFT calculations and existing experiments. However, in general, LDA' + DMFT results give better quantitative agreement with experimental data for band gap sizes and oxygen-state positions compared to the conventional LDA + DMFT method.

  4. A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Zhou, Han; Zhang, Lusi; Zhang, Dongyang; Chen, Shuangqiang; Coxon, Paul R.; He, Xiong; Coto, Mike; Kim, Hyun-Kyung; Xi, Kai; Ding, Shujiang

    2016-11-01

    We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4 nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (‑SO3‑) that can effectively attract Ni2+, Co2+, Zn2+ ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068 mAh g‑1 after 100 cycles at a current density of 400 mAg‑1. For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360 Fg‑1 at current densities of 10 Ag‑1 after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices.

  5. A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors

    PubMed Central

    Zhou, Han; Zhang, Lusi; Zhang, Dongyang; Chen, Shuangqiang; Coxon, Paul R.; He, Xiong; Coto, Mike; Kim, Hyun-Kyung; Xi, Kai; Ding, Shujiang

    2016-01-01

    We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4 nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (−SO3−) that can effectively attract Ni2+, Co2+, Zn2+ ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068 mAh g−1 after 100 cycles at a current density of 400 mAg−1. For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360 Fg−1 at current densities of 10 Ag−1 after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices. PMID:27886231

  6. A universal synthetic route to carbon nanotube/transition metal oxide nano-composites for lithium ion batteries and electrochemical capacitors.

    PubMed

    Zhou, Han; Zhang, Lusi; Zhang, Dongyang; Chen, Shuangqiang; Coxon, Paul R; He, Xiong; Coto, Mike; Kim, Hyun-Kyung; Xi, Kai; Ding, Shujiang

    2016-11-25

    We report a simple synthetic approach to coaxially grow transition metal oxide (TMO) nanostructures on carbon nanotubes (CNT) with ready control of phase and morphology. A thin (~4 nm) sulfonated-polystyrene (SPS) pre-coating is essential for the deposition of transition metal based materials. This layer has abundant sulfonic groups (-SO3(-)) that can effectively attract Ni(2+), Co(2+), Zn(2+) ions through electrostatic interaction and induce them via hydrolysis, dehydration and recrystallization to form coaxial (NiO, Co3O4, NiCoO2 and ZnCo2O4) shells and a nanosheet-like morphology around CNT. These structures possess a large active surface and enhanced structural robustness when used as electrode materials for lithium-ion batteries (LIBs) and electrochemical capacitors (ECs). As electrodes for LIBs, the ZnCo2O4@CNT material shows extremely stable cycling performance with a discharge capacity of 1068 mAh g(-1) after 100 cycles at a current density of 400 mAg(-1). For EC applications, the NiCoO2@CNT exhibits a high capacitance of 1360 Fg(-1) at current densities of 10 Ag(-1) after 3000 cycles and an overall capacitance loss of only 1.4%. These results demonstrate the potential of such hybrid materials meeting the crucial requirements of cycling stability and high rate capability for energy conversion and storage devices.

  7. Effect of Transition Metal Ions on the B Ring Oxidation of Sterols and their Kinetics in Oil-in-Water Emulsions

    NASA Astrophysics Data System (ADS)

    Lu, Baiyi; Hu, Yinzhou; Huang, Weisu; Wang, Mengmeng; Jiang, Yuan; Lou, Tiantian

    2016-06-01

    This study investigated the effect of metal ions on the oxidation of sterols and their kinetics in oil-in-water emulsions. Sterol substrates were added with different metal ions (Cu2+, Fe2+, Mn2+, Zn2+, Na+, and Mg2+) of five concentrations and investigated after 2 h of heating at 90 °C. The substrates added with Fe2+ and Cu2+ were heated continuously to evaluate the kinetics of four sterols and their corresponding sterol oxidation products (SOPs). Sterol oxidation increased as the metal ion concentration increased and the heating time was prolonged. The capability of the metal ions oxidizing sterols ranked as followed: Fe2+ > Cu2+ > Mn2+ > Zn2+ > Mg2+ ≈ Na+. 7-Ketosterol, 7β/7α-Hydroxysterol, 5β,6β/5α,6α-Epoxysterol, and Triols were the main oxides on the B ring, whereas 6β-Hydroxysterol was not or only slightly influenced. The acceleration of sterol degradation induced by Fe2+ and Cu2+, as well as the formation of oxidation products, followed first-order formation/elimination kinetics. The acceleration effect may be partly ascribed to the increase in elimination rate constant and formation rate constant. Transition metal ions can significantly induce sterol oxidation, which reduces food nutritional quality and triggers the formation of undesirable compounds, such as SOPs.

  8. Effect of Transition Metal Ions on the B Ring Oxidation of Sterols and their Kinetics in Oil-in-Water Emulsions

    PubMed Central

    Lu, Baiyi; Hu, Yinzhou; Huang, Weisu; Wang, Mengmeng; Jiang, Yuan; Lou, Tiantian

    2016-01-01

    This study investigated the effect of metal ions on the oxidation of sterols and their kinetics in oil-in-water emulsions. Sterol substrates were added with different metal ions (Cu2+, Fe2+, Mn2+, Zn2+, Na+, and Mg2+) of five concentrations and investigated after 2 h of heating at 90 °C. The substrates added with Fe2+ and Cu2+ were heated continuously to evaluate the kinetics of four sterols and their corresponding sterol oxidation products (SOPs). Sterol oxidation increased as the metal ion concentration increased and the heating time was prolonged. The capability of the metal ions oxidizing sterols ranked as followed: Fe2+ > Cu2+ > Mn2+ > Zn2+ > Mg2+ ≈ Na+. 7-Ketosterol, 7β/7α-Hydroxysterol, 5β,6β/5α,6α-Epoxysterol, and Triols were the main oxides on the B ring, whereas 6β-Hydroxysterol was not or only slightly influenced. The acceleration of sterol degradation induced by Fe2+ and Cu2+, as well as the formation of oxidation products, followed first-order formation/elimination kinetics. The acceleration effect may be partly ascribed to the increase in elimination rate constant and formation rate constant. Transition metal ions can significantly induce sterol oxidation, which reduces food nutritional quality and triggers the formation of undesirable compounds, such as SOPs. PMID:27328709

  9. Coulomb Correlations in 4d and 5d Oxides from First Principles - or How Spin-Orbit Materials choose their Effective Orbital Degeneracies.

    PubMed

    Martins, Cyril; Aichhorn, Markus; Biermann, Silke

    2017-03-06

    The interplay of spin-orbit coupling and Coulomb correlations has become a hot topic in condensed matter theory and is especially at stake in 4d and 5d transition metal oxides, like iridates or rhodates. Here, we review recent advances in dynamical mean-field theory(DMFT)-based electronic structure calculations for treating such compounds, introducing all necessary implementation details. We also discuss the evaluation of Hubbard interactions in spin-orbit materials. As an example, we perform DMFT calculations on insulating strontium iridate (Sr2IrO4) and its 4d metallic counterpart strontium rhodate (Sr2RhO4). While a Mott-insulating state is obtained for Sr2IrO4 in its paramagnetic phase, the obtained spectral properties and Fermi surfaces for Sr2RhO4 show excellent agreement with available experimental data. We finally discuss the electronic structure of these two compounds by introducing the notion of effective spin-orbital degeneracy as the key quantity that determines the correlation strength. We stress that effective spin-orbital degeneracy introduces an additional axis into the conventional picture of a phase diagram based on filling and on the ratio of interactions to bandwidth, in analogy with the degeneracy controled Mott transition in d1 perovskites.

  10. Modification of MWCNT@TiO2 core-shell nanocomposites with transition metal oxide dopants for photoreduction of carbon dioxide into methane

    NASA Astrophysics Data System (ADS)

    Gui, Meei Mei; Chai, Siang-Piao; Mohamed, Abdul Rahman

    2014-11-01

    Titanium dioxide (TiO2) doped with visible-light-responsive metal oxides has been widely reported for improving the visible light absorption performance of TiO2 and its photocatalytic activity. The metal oxides could function as 'charge-carrier traps' that transport electrons from TiO2 through the heterojunction of the TiO2-metal oxides. In this work, the common transition metal oxides, i.e. FeOx, CuOx, NiO, CoOx and ZnO, were doped onto MWCNT@TiO2 core-shell nanocomposites. The effects of the metal oxide dopants on the photoactivity of the core-shell nanocomposites on CO2 reduction were studied. Characterization with diffuse-reflectance UV-vis showed significant improvement on visible light absorption after doping MWCNT@TiO2 with CuOx, FeOx and CoOx with the adsorption band-edge position red-shifted into the wavelength range of 480-630 nm. CuO-MWCNT@TiO2 appeared to be the most active one among all the studied photocatalysts, achieving a total methane formation of 0.93 μmol/g-catalyst.

  11. Anomalous High-Energy Waterfall-Like Electronic Structure in 5 d Transition Metal Oxide Sr2IrO4 with a Strong Spin-Orbit Coupling

    PubMed Central

    Liu, Yan; Yu, Li; Jia, Xiaowen; Zhao, Jianzhou; Weng, Hongming; Peng, Yingying; Chen, Chaoyu; Xie, Zhuojin; Mou, Daixiang; He, Junfeng; Liu, Xu; Feng, Ya; Yi, Hemian; Zhao, Lin; Liu, Guodong; He, Shaolong; Dong, Xiaoli; Zhang, Jun; Xu, Zuyan; Chen, Chuangtian; Cao, Gang; Dai, Xi; Fang, Zhong; Zhou, X. J.

    2015-01-01

    The low energy electronic structure of Sr2IrO4 has been well studied and understood in terms of an effective Jeff = 1/2 Mott insulator model. However, little work has been done in studying its high energy electronic behaviors. Here we report a new observation of the anomalous high energy electronic structure in Sr2IrO4. By taking high-resolution angle-resolved photoemission measurements on Sr2IrO4 over a wide energy range, we have revealed for the first time that the high energy electronic structures show unusual nearly-vertical bands that extend over a large energy range. Such anomalous high energy behaviors resemble the high energy waterfall features observed in the cuprate superconductors. While strong electron correlation plays an important role in producing high energy waterfall features in the cuprate superconductors, the revelation of the high energy anomalies in Sr2IrO4, which exhibits strong spin-orbit coupling and a moderate electron correlation, points to an unknown and novel route in generating exotic electronic excitations. PMID:26267653

  12. Anomalous High-Energy Waterfall-Like Electronic Structure in 5 d Transition Metal Oxide Sr2IrO4 with a Strong Spin-Orbit Coupling

    NASA Astrophysics Data System (ADS)

    Liu, Yan; Yu, Li; Jia, Xiaowen; Zhao, Jianzhou; Weng, Hongming; Peng, Yingying; Chen, Chaoyu; Xie, Zhuojin; Mou, Daixiang; He, Junfeng; Liu, Xu; Feng, Ya; Yi, Hemian; Zhao, Lin; Liu, Guodong; He, Shaolong; Dong, Xiaoli; Zhang, Jun; Xu, Zuyan; Chen, Chuangtian; Cao, Gang; Dai, Xi; Fang, Zhong; Zhou, X. J.

    2015-08-01

    The low energy electronic structure of Sr2IrO4 has been well studied and understood in terms of an effective Jeff = 1/2 Mott insulator model. However, little work has been done in studying its high energy electronic behaviors. Here we report a new observation of the anomalous high energy electronic structure in Sr2IrO4. By taking high-resolution angle-resolved photoemission measurements on Sr2IrO4 over a wide energy range, we have revealed for the first time that the high energy electronic structures show unusual nearly-vertical bands that extend over a large energy range. Such anomalous high energy behaviors resemble the high energy waterfall features observed in the cuprate superconductors. While strong electron correlation plays an important role in producing high energy waterfall features in the cuprate superconductors, the revelation of the high energy anomalies in Sr2IrO4, which exhibits strong spin-orbit coupling and a moderate electron correlation, points to an unknown and novel route in generating exotic electronic excitations.

  13. Anomalous High-Energy Waterfall-Like Electronic Structure in 5 d Transition Metal Oxide Sr2IrO4 with a Strong Spin-Orbit Coupling.

    PubMed

    Liu, Yan; Yu, Li; Jia, Xiaowen; Zhao, Jianzhou; Weng, Hongming; Peng, Yingying; Chen, Chaoyu; Xie, Zhuojin; Mou, Daixiang; He, Junfeng; Liu, Xu; Feng, Ya; Yi, Hemian; Zhao, Lin; Liu, Guodong; He, Shaolong; Dong, Xiaoli; Zhang, Jun; Xu, Zuyan; Chen, Chuangtian; Cao, Gang; Dai, Xi; Fang, Zhong; Zhou, X J

    2015-08-12

    The low energy electronic structure of Sr2IrO4 has been well studied and understood in terms of an effective Jeff = 1/2 Mott insulator model. However, little work has been done in studying its high energy electronic behaviors. Here we report a new observation of the anomalous high energy electronic structure in Sr2IrO4. By taking high-resolution angle-resolved photoemission measurements on Sr2IrO4 over a wide energy range, we have revealed for the first time that the high energy electronic structures show unusual nearly-vertical bands that extend over a large energy range. Such anomalous high energy behaviors resemble the high energy waterfall features observed in the cuprate superconductors. While strong electron correlation plays an important role in producing high energy waterfall features in the cuprate superconductors, the revelation of the high energy anomalies in Sr2IrO4, which exhibits strong spin-orbit coupling and a moderate electron correlation, points to an unknown and novel route in generating exotic electronic excitations.

  14. Strong and anisotropic superexchange in the single-molecule magnet (SMM) [MnIII(6)OsIII]3+: promoting SMM behavior through 3d-5d transition metal substitution.

    PubMed

    Hoeke, Veronika; Stammler, Anja; Bögge, Hartmut; Schnack, Jürgen; Glaser, Thorsten

    2014-01-06

    The reaction of the in situ generated trinuclear triplesalen complex [(talent-Bu2)MnIII3(solv)n]3+ with (Ph4P)3[OsIII(CN)6] and NaClO4·H2O affords [MnIII6OsIII](ClO4)3 (= [{(talent-Bu2)MnIII3}2{OsIII(CN)6}](ClO4)3) in the presence of the oxidizing agent [(tacn)2NiIII](ClO4)3 (tacn =1,4,7-triazacyclononane), while the reaction of [(talent-Bu2)MnIII3(solv)n]3+ with K4[OsII(CN)6] and NaClO4·H2O yields [MnIII6OsII](ClO4)2 under an argon atmosphere. The molecular structure of [MnIII6OsIII]3+ as determined by single-crystal X-ray diffraction is closely related to the already published [MnIII6Mc]3+ complexes (Mc = CrIII, FeIII, CoIII, MnIII). The half-wave potential of the OsIII/OsII couple is E1/2 = 0.07 V vs Fc+/Fc. The FT-IR and electronic absorption spectra of [MnIII6OsII]2+ and [MnIII6OsIII]3+ exhibit distinct features of dicationic and tricationic [MnIII6Mc]n+ complexes, respectively. The dc magnetic data (μeff vs T, M vs B, and VTVH) of [MnIII6OsII]2+ are successfully simulated by a full-matrix diagonalization of a spin-Hamiltonian including isotropic exchange, zero-field splitting with full consideration of the relative orientation of the D-tensors, and Zeeman interaction, indicating antiferromagnetic MnIII–MnIII interactions within the trinuclear triplesalen subunits (JMn–Mn(1) = −(0.53 ± 0.01) cm–1, Ĥex = −2∑i

  15. Transition metals in superheat melts

    NASA Technical Reports Server (NTRS)

    Jakes, Petr; Wolfbauer, Michael-Patrick

    1993-01-01

    A series of experiments with silicate melts doped with transition element oxides was carried out at atmospheric pressures of inert gas at temperatures exceeding liquidus. As predicted from the shape of fO2 buffer curves in T-fO2 diagrams the reducing conditions for a particular oxide-metal pair can be achieved through the T increase if the released oxygen is continuously removed. Experimental studies suggest that transition metals such as Cr or V behave as siderophile elements at temperatures exceeding liquidus temperatures if the system is not buffered by the presence of other oxide of more siderophile element. For example the presence of FeO prevents the reduction of Cr2O3. The sequence of decreasing siderophility of transition elements at superheat conditions (Mo, Ni, Fe, Cr) matches the decreasing degree of depletion of siderophile elements in mantle rocks as compared to chondrites.

  16. Superconductivity in transition metals.

    PubMed

    Slocombe, Daniel R; Kuznetsov, Vladimir L; Grochala, Wojciech; Williams, Robert J P; Edwards, Peter P

    2015-03-13

    A qualitative account of the occurrence and magnitude of superconductivity in the transition metals is presented, with a primary emphasis on elements of the first row. Correlations of the important parameters of the Bardeen-Cooper-Schrieffer theory of superconductivity are highlighted with respect to the number of d-shell electrons per atom of the transition elements. The relation between the systematics of superconductivity in the transition metals and the periodic table high-lights the importance of short-range or chemical bonding on the remarkable natural phenomenon of superconductivity in the chemical elements. A relationship between superconductivity and lattice instability appears naturally as a balance and competition between localized covalent bonding and so-called broken covalency, which favours d-electron delocalization and superconductivity. In this manner, the systematics of superconductivity and various other physical properties of the transition elements are related and unified.

  17. Carbon-Coated Honeycomb Ni-Mn-Co-O Inverse Opal: A High Capacity Ternary Transition Metal Oxide Anode for Li-ion Batteries.

    PubMed

    McNulty, David; Geaney, Hugh; O'Dwyer, Colm

    2017-02-10

    We present the formation of a carbon-coated honeycomb ternary Ni-Mn-Co-O inverse opal as a conversion mode anode material for Li-ion battery applications. In order to obtain high capacity via conversion mode reactions, a single phase crystalline honeycombed IO structure of Ni-Mn-Co-O material was first formed. This Ni-Mn-Co-O IO converts via reversible redox reactions and Li2O formation to a 3D structured matrix assembly of nanoparticles of three (MnO, CoO and NiO) oxides, that facilitates efficient reactions with Li. A carbon coating maintains the structure without clogging the open-worked IO pore morphology for electrolyte penetration and mass transport of products during cycling. The highly porous IO was compared in a Li-ion half-cell to nanoparticles of the same material and showed significant improvement in specific capacity and capacity retention. Further optimization of the system was investigated by incorporating a vinylene carbonate additive into the electrolyte solution which boosted performance, offering promising high-rate performance and good capacity retention over extended cycling. The analysis confirms the possibility of creating a ternary transition metal oxide material with binder free accessible open-worked structure to allow three conversion mode oxides to efficiently cycle as an anode material for Li-ion battery applications.

  18. Beyond Metal-Hydrides: Non-Transition-Metal and Metal-Free Ligand-Centered Electrocatalytic Hydrogen Evolution and Hydrogen Oxidation.

    PubMed

    Haddad, Andrew Z; Garabato, Brady D; Kozlowski, Pawel M; Buchanan, Robert M; Grapperhaus, Craig A

    2016-06-29

    A new pathway for homogeneous electrocatalytic H2 evolution and H2 oxidation has been developed using a redox active thiosemicarbazone and its zinc complex as seminal metal-free and transition-metal-free examples. Diacetyl-bis(N-4-methyl-3-thiosemicarbazone) and zinc diacetyl-bis(N-4-methyl-3-thiosemicarbazide) display the highest reported TOFs of any homogeneous ligand-centered H2 evolution catalyst, 1320 and 1170 s(-1), respectively, while the zinc complex also displays one of the highest reported TOF values for H2 oxidation, 72 s(-1), of any homogeneous catalyst. Catalysis proceeds via ligand-centered proton-transfer and electron-transfer events while avoiding traditional metal-hydride intermediates. The unique mechanism is consistent with electrochemical results and is further supported by density functional theory. The results identify a new direction for the design of electrocatalysts for H2 evolution and H2 oxidation that are not reliant on metal-hydride intermediates.

  19. Carbon-Coated Honeycomb Ni-Mn-Co-O Inverse Opal: A High Capacity Ternary Transition Metal Oxide Anode for Li-ion Batteries

    PubMed Central

    McNulty, David; Geaney, Hugh; O’Dwyer, Colm

    2017-01-01

    We present the formation of a carbon-coated honeycomb ternary Ni-Mn-Co-O inverse opal as a conversion mode anode material for Li-ion battery applications. In order to obtain high capacity via conversion mode reactions, a single phase crystalline honeycombed IO structure of Ni-Mn-Co-O material was first formed. This Ni-Mn-Co-O IO converts via reversible redox reactions and Li2O formation to a 3D structured matrix assembly of nanoparticles of three (MnO, CoO and NiO) oxides, that facilitates efficient reactions with Li. A carbon coating maintains the structure without clogging the open-worked IO pore morphology for electrolyte penetration and mass transport of products during cycling. The highly porous IO was compared in a Li-ion half-cell to nanoparticles of the same material and showed significant improvement in specific capacity and capacity retention. Further optimization of the system was investigated by incorporating a vinylene carbonate additive into the electrolyte solution which boosted performance, offering promising high-rate performance and good capacity retention over extended cycling. The analysis confirms the possibility of creating a ternary transition metal oxide material with binder free accessible open-worked structure to allow three conversion mode oxides to efficiently cycle as an anode material for Li-ion battery applications. PMID:28186183

  20. Transition-Metal-Free Regioselective Alkylation of Pyridine N-Oxides Using 1,1-Diborylalkanes as Alkylating Reagents.

    PubMed

    Jo, Woohyun; Kim, Junghoon; Choi, Seoyoung; Cho, Seung Hwan

    2016-08-08

    Reported herein is an unprecedented base-promoted deborylative alkylation of pyridine N-oxides using 1,1-diborylalkanes as alkyl sources. The reaction proceeds efficiently for a wide range of pyridine N-oxides and 1,1-diborylalkanes with excellent regioselectivity. The utility of the developed method is demonstrated by the sequential C-H arylation and methylation of pyridine N-oxides. The reaction also can be applied for the direct introduction of a methyl group to 9-O-methylquinine N-oxide, thus it can serve as a powerful method for late-stage functionalization.

  1. Contributions of superoxide, hydrogen peroxide, and transition metal ions to auto-oxidation of the favism-inducing pyrimidine aglycone, divicine, and its reactions with haemoglobin.

    PubMed

    Winterbourn, C C; Benatti, U; De Flora, A

    1986-06-15

    The influence of O2-, H2O2 and metal ions on the auto-oxidation of divicine, a pyrimidine aglycone, was studied. In air at pH 7.4, the hydroquinonic form oxidized within a few minutes. Superoxide dismutase (SOD) markedly decreased the initial rate, giving a lag phase followed by rapid oxidation. Although catalase or diethylenetriamine-penta-acetic acid (DTPA) alone had little effect, each in the presence of SOD further slowed the initial rate and increased the lag. H2O2 decreased the lag time, as did Cu2+, Fe2+ or haemoglobin. GSH substantially increased the lag phase, but it eventually reacted with the divicine to form a 305 nm-absorbing adduct. These results indicate that an O2(-)-dependent mechanism of divicine auto-oxidation normally predominates. Auto-oxidation can also occur by a mechanism involving H2O2 and transition metal ions or haemoglobin, and if both these reactions are prevented by SOD and DTPA or catalase, a third mechanism, requiring build-up of an autocatalytic intermediate, becomes operative. Oxyhaemoglobin did not react directly with divicine, but reacted with the H2O2 produced by divicine auto-oxidation to give mainly an oxidized derivative presumed to be ferrylhaemoglobin. Divicine was shown to reduce ferylhaemoglobin to methaemoglobin, and this reaction was probably responsible for the acceleratory effect of haemoglobin on divicine oxidation. These results indicate that O2 rather than oxyhaemoglobin is likely to initiate divicine oxidation in the erythrocyte. Haemolytic crises, which are thought to result from this oxidation, occur only sporadically in glucose-6-phosphate dehydrogenase deficient individuals following ingestion of fava beans. A characteristic of the crises is acute depletion of erythrocyte GSH, and the vulnerability of these cells could relate to the ability of GSH, in combination with SOD, to protect against the autocatalytic mechanism of divicine auto-oxidation. Our demonstration of a variety of auto-oxidation pathways also

  2. Transition Metal Switchable Mirror

    SciTech Connect

    2009-01-01

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft. More information at: http://windows.lbl.gov/materials/chromogenics/default.htm

  3. Transition Metal Switchable Mirror

    SciTech Connect

    2009-08-21

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft.

  4. Transition Metal Switchable Mirror

    ScienceCinema

    None

    2016-07-12

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft. More information at: http://windows.lbl.gov/materials/chromogenics/default.htm

  5. Transition Metal Switchable Mirror

    ScienceCinema

    None

    2016-07-12

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft.

  6. Hydrocracking and hydroisomerization of long-chain alkanes and polyolefins over metal-promoted anion-modified transition metal oxides

    SciTech Connect

    Venkatesh, Koppampatti R.; Hu, Jianli; Tierney, John W.; Wender, Irving

    1996-12-01

    A method is described for cracking a feedstock by contacting the feedstock with a metal-promoted anion-modified metal oxide catalyst in the presence of hydrogen gas. The metal oxide of the catalyst is one or more of ZrO{sub 2}, HfO{sub 2}, TiO{sub 2} and SnO{sub 2}, and the feedstock is principally chains of at least 20 carbon atoms. The metal-promoted anion-modified metal oxide catalyst contains one or more of Pt, Ni, Pd, Rh, Ir, Ru, (Mn and Fe) or mixtures of them present between about 0.2% to about 15% by weight of the catalyst. The metal-promoted anion-modified metal oxide catalyst contains one or more of SO{sub 4}, WO{sub 3}, or mixtures of them present between about 0.5% to about 20% by weight of the catalyst.

  7. Hydrocracking and hydroisomerization of long-chain alkanes and polyolefins over metal-promoted anion-modified transition metal oxides

    DOEpatents

    Venkatesh, Koppampatti R.; Hu, Jianli; Tierney, John W.; Wender, Irving

    2001-01-01

    A method of cracking a feedstock by contacting the feedstock with a metal-promoted anion-modified metal oxide catalyst in the presence of hydrogen gas. The metal oxide of the catalyst is one or more of ZrO.sub.2, HfO.sub.2, TiO.sub.2 and SnO.sub.2, and the feedstock is principally chains of at least 20 carbon atoms. The metal-promoted anion-modified metal oxide catalyst contains one or more of Pt, Ni, Pd, Rh, Ir, Ru, (Mn & Fe) or mixtures of them present between about 0.2% to about 15% by weight of the catalyst. The metal-promoted anion-modified metal oxide catalyst contains one or more of SO.sub.4, WO.sub.3, or mixtures of them present between about 0.5% to about 20% by weight of the catalyst.

  8. Ni And Co Segregations On Selective Surface Facets And Rational Design Of Layered Lithium Transition-metal Oxide Cathodes

    SciTech Connect

    Yan, Pengfei; Zheng, Jianming; Zheng, Jiaxin; Wang, Zhiguo; Teng, Gaofeng; Kuppan, Saravanan; Xiao, Jie; Chen, Guoying; Pan, Feng; Zhang, Jiguang; Wang, Chong M.

    2016-05-05

    The chemical processes occurring on the surface of cathode materials during battery cycling play a crucial role in determining battery’s performance. However, our understanding on such surface chemistry is far from clear due to the complexity of redox chemistry during battery charge/discharge. In this work, through intensive aberration corrected STEM investigation on eight layered oxide cathode materials, we report two important findings on the pristine oxides. First, Ni and Co show strong plane selectivity when building up their respective surface segregation layers (SSL). Specifically, Ni-SSL is exclusively developed on (200)m facet in Li-Mn-rich oxides (monoclinic C2/m symmetry) and (012)h facet in Mn-Ni equally rich oxides (hexagonal R-3m symmetry), while Co-SSL has a strong preference to (20-2)m plane with minimal Co-SSL also developed on some other planes in LMR cathodes. Structurally, Ni-SSLs tend to form spinel-like lattice while Co-SSLs are in a rock-salt-like structure. Secondly, by increasing Ni concentration in these layered oxides, Ni and Co SSLs can be suppressed and even eliminated. Our findings indicate that Ni and Co SSLs are tunable through controlling particle morphology and oxide composition, which opens up a new way for future rational design and synthesis of cathode materials.

  9. Transition metal complexes coupled to vacancies in oxides: origin of different properties of Cr3+ in MgO bounded to a <100> or <110> Mg2+ vacancy.

    PubMed

    Aramburu, J A; García-Fernández, P; Barriuso, M T; Moreno, M

    2013-11-27

    Despite the importance of vacancies over the properties of insulating oxides its influence on neighboring transition metal ions is far from being understood. This work is devoted to find the origin of various up to now unexplained properties of chromium bounded either to a <100> or a <110> Mg(2+) vacancy in MgO. In these model systems particular attention is paid to understand, by means of ab initio calculations, why the cubic field splitting parameter, 10Dq, is surprisingly 1600 cm(-1) higher for a <100> than for a <110> vacancy, a fact behind the suppression of the sharp (2)E → (4)A2 luminescence in the latter case. Our calculations, which reproduce the main experimental facts, prove that the average Cr(3+)-O(2-) distance is the same within 0.8% for both systems, and thus, the low 10Dq value for a <110> vacancy is shown to be due mainly to the electrostatic potential from the missing Mg(2+) ion, which increases the energy of antibonding t(2g) (∼xy, xz, yz) levels. By contrast, for a <100> Mg(2+) vacancy that potential provides a supplementary increase of the e(g) (∼x(2) - y(2), 3z(2 )- r(2)) level energy and thus of 10Dq. The existence of the (2)E → (4)A2 luminescence for Cr(3+)-doped MgO under perfect cubic symmetry or with a <100> vacancy is shown to be greatly helped by the internal electric field created by the rest of the lattice ions on the CrO6(9-) unit, whose importance is usually ignored. The present results underline the role of ab initio calculations for unveiling the subtle effects induced by a close vacancy on the properties of transition metal ions in oxides. At the same time they stress the failure of the empirical superposition model for deriving the equilibrium geometry of C4v and C2v centers in MgO:Cr(3+).

  10. Oxidations of Organic and Inorganic Substrates by Superoxo-, hydroperoxo-, and oxo-compounds of the transition metals.

    SciTech Connect

    Vasbinder, Michael John

    2006-01-01

    Chapters 1 and 2 dealt with the chemistry of superoxo-, hydroperoxo-, and oxo- complexes of chromium, rhodium and cobalt. Chapter 3 dealt with the mechanism of oxygen-atom transfer catalyzed by an oxo-complex of rhenium. In Chapter 1, it was shown that hydroperoxometal complexes of cobalt and rhodium react with superoxochromium and chromyl ions, generating reduced chromium species while oxidizing the hydroperoxometal ions to their corresponding superoxometal ions. It was shown that the chromyl and superoxochromium ions are the more powerful oxidants. Evidence supports hydrogen atom transfer from the hydroperoxometal ion to the oxidizing superoxochromium or chromyl ion as the reaction mechanism. There is a significant H/D kinetic isotope effect. Comparisons to the rate constants of other known hydrogen atom transfer reactions show the expected correlation with bond dissociation energies. In Chapter 2, it was found that the superoxometal complexes Cr{sub aq}OO2+ and Rh(NH3)4(H2O)OO2+ oxidize stable nitroxyl radicals of the TEMPO series with rate constants that correlate with the redox potentials of both the oxidant and reductant. These reactions fit the Marcus equation for electron transfer near the theoretical value. Acid catalysis is important to the reaction, especially the thermodynamically limited cases involving Rh(NH3)4(H2O)OO2+ as the oxidant. The rate constants are notably less than those measured in the reaction between the same nitroxyl radicals and other strong free-radical oxidants, an illustration of the delocalized and stabilized nature of the superoxometal ions. Chapter 3 showed that oxo-rhenium catalysts needed a nucleophile to complete the catalytic oxygen-atom transfer from substituted pyridine-N-oxides to triphenylphosphine. The reaction was studied by introducing various pyridine-derived nucleophiles and monitoring their effect on the rate, then

  11. Final-state effect on x-ray photoelectron spectrum of nominally d1 and n -doped d0 transition-metal oxides

    NASA Astrophysics Data System (ADS)

    Lin, Chungwei; Posadas, Agham; Hadamek, Tobias; Demkov, Alexander A.

    2015-07-01

    We investigate the x-ray photoelectron spectroscopy (XPS) of nominally d1 and n -doped d0 transition-metal oxides including NbO2,SrVO3, and LaTiO3 (nominally d1), as well as n -doped SrTiO3 (nominally d0). In the case of single phase d1 oxides, we find that the XPS spectra (specifically photoelectrons from Nb 3 d , V 2 p , Ti 2 p core levels) all display at least two, and sometimes three distinct components, which can be consistently identified as d0,d1, and d2 oxidation states (with decreasing order in binding energy). Electron doping increases the d2 component but decreases the d0 component, whereas hole doping reverses this trend; a single d1 peak is never observed, and the d0 peak is always present even in phase-pure samples. In the case of n -doped SrTiO3, the d1 component appears as a weak shoulder with respect to the main d0 peak. We argue that these multiple peaks should be understood as being due to the final-state effect and are intrinsic to the materials. Their presence does not necessarily imply the existence of spatially localized ions of different oxidation states nor of separate phases. A simple model is provided to illustrate this interpretation, and several experiments are discussed accordingly. The key parameter to determine the relative importance between the initial-state and final-state effects is also pointed out.

  12. Nucleic acid-functionalized transition metal nanosheets for biosensing applications.

    PubMed

    Mo, Liuting; Li, Juan; Liu, Qiaoling; Qiu, Liping; Tan, Weihong

    2017-03-15

    In clinical diagnostics, as well as food and environmental safety practices, biosensors are powerful tools for monitoring biological or biochemical processes. Two-dimensional (2D) transition metal nanomaterials, including transition metal chalcogenides (TMCs) and transition metal oxides (TMOs), are receiving growing interest for their use in biosensing applications based on such unique properties as high surface area and fluorescence quenching abilities. Meanwhile, nucleic acid probes based on Watson-Crick base-pairing rules are also being widely applied in biosensing based on their excellent recognition capability. In particular, the emergence of functional nucleic acids in the 1980s, especially aptamers, has substantially extended the recognition capability of nucleic acids to various targets, ranging from small organic molecules and metal ions to proteins and cells. Based on π-π stacking interaction between transition metal nanosheets and nucleic acids, biosensing systems can be easily assembled. Therefore, the combination of 2D transition metal nanomaterials and nucleic acids brings intriguing opportunities in bioanalysis and biomedicine. In this review, we summarize recent advances of nucleic acid-functionalized transition metal nanosheets in biosensing applications. The structure and properties of 2D transition metal nanomaterials are first discussed, emphasizing the interaction between transition metal nanosheets and nucleic acids. Then, the applications of nucleic acid-functionalized transition metal nanosheet-based biosensors are discussed in the context of different signal transducing mechanisms, including optical and electrochemical approaches. Finally, we provide our perspectives on the current challenges and opportunities in this promising field.

  13. Laterally configured resistive switching device based on transition-metal nano-gap electrode on Gd oxide

    SciTech Connect

    Kawakita, Masatoshi; Okabe, Kyota; Kimura, Takashi

    2016-01-11

    We have developed a fabrication process for a laterally configured resistive switching device based on a Gd oxide. A nano-gap electrode connected by a Gd oxide with the ideal interfaces has been created by adapting the electro-migration method in a metal/GdO{sub x} bilayer system. Bipolar set and reset operations have been clearly observed in the Pt/GdO{sub x} system similarly in the vertical device based on GdO{sub x}. Interestingly, we were able to observe a clear bipolar switching also in a ferromagnetic CoFeB nano-gap electrode with better stability compared to the Pt/GdO{sub x} device. The superior performance of the CoFeB/GdO{sub x} device implies the importance of the spin on the resistive switching.

  14. Strategies to curb structural changes of lithium/transition metal oxide cathode materials & the changes' effects on thermal & cycling stability

    DOE PAGES

    Yu, Xiqian; Hu, Enyuan; Bak, Seongmin; ...

    2015-12-07

    Structural transformation behaviors of several typical oxide cathode materials during a heating process are reviewed in detail to provide in-depth understanding of the key factors governing the thermal stability of these materials. Furthermore, we also discuss applying the information about heat induced structural evolution in the study of electrochemically induced structural changes. All these discussions are expected to provide valuable insights for designing oxide cathode materials with significantly improved structural stability for safe, long-life lithium ion batteries, as the safety of lithium-ion batteries is a critical issue. As a result, it is widely accepted that the thermal instability of themore » cathodes is one of the most critical factors in thermal runaway and related safety problems.« less

  15. Strategies to curb structural changes of lithium/transition metal oxide cathode materials & the changes' effects on thermal & cycling stability

    SciTech Connect

    Yu, Xiqian; Hu, Enyuan; Bak, Seongmin; Zhou, Yong -Ning; Yang, Xiao -Qing

    2015-12-07

    Structural transformation behaviors of several typical oxide cathode materials during a heating process are reviewed in detail to provide in-depth understanding of the key factors governing the thermal stability of these materials. Furthermore, we also discuss applying the information about heat induced structural evolution in the study of electrochemically induced structural changes. All these discussions are expected to provide valuable insights for designing oxide cathode materials with significantly improved structural stability for safe, long-life lithium ion batteries, as the safety of lithium-ion batteries is a critical issue. As a result, it is widely accepted that the thermal instability of the cathodes is one of the most critical factors in thermal runaway and related safety problems.

  16. Development of novel low-temperature selective hydrogen gas sensors made of palladium/oxide or nitride capped Magnesium-transition metal hydride films

    NASA Astrophysics Data System (ADS)

    Tang, Yu Ming

    Palladium capped Mg-based transition metal alloy film (Pd/Mg-TM) is a potentially useful hydrogen gas (H2) sensing material, which can operate at low temperature for detection of H2 leakage in an environment to ensure safe use and storage of the gas. The Pd layer catalytically dissociates hydrogen molecules, and the hydrogen atoms produced can enter (hydridation) or be detached (dehydridation) from the alloy layer. These processes are reversible, such that the film is switchable between a metal state and a hydride state, giving rise to substantial changes in its optical transmittance/reflectance and electrical resistivity. Unlike a conventional metal-oxide (MOx) H2 sensor, hydridation of an Mg-TM film is associated with relatively low enthalpy, and hence can perform at temperature much lower than the operation temperature of an MOx sensor (typically around 500°C or above). As such, an Mg-TM based sensor does not experience undesired annealing effect during operation, and hence is much more stable and durable. Furthermore, the detection selectivity of a Pd/Mg-TM film versus other reducing gases is superior to most conventional MOx-type hydrogen sensors. In this project, we systematically investigated the H2 sensing properties of Pd/Mg-TM films.

  17. A new simple method for point contact Andreev reflection (PCAR) using a self-aligned atomic filament in transition-metal oxides.

    PubMed

    Hwang, Inrok; Lee, Keundong; Jin, Hyunwoo; Choi, Sunhwa; Jung, Eunok; Park, Bae Ho; Lee, Suyoun

    2015-05-14

    Point contact Andreev reflection (PCAR) has become a standard method for measuring the spin polarization (P) of spintronic materials due to its unique simplicity and the firm physical ground, but it is still challenging to achieve a clean point contact between a superconductor (SC) and a metal (N) for implementing PCAR. In this work, we suggest a much simpler method for PCAR measurement, where a point contact between SC and N is provided by a metallic filament in a transition-metal oxide generated by electrical bias. This method has been successfully demonstrated using a structure composed of Nb/NiO/Pt, where P of the Ni filament was estimated to be about 40%, consistent with the known value of the bulk Ni. In addition, we investigated the dependence of the conductance spectrum on the measurement temperature and the magnetic field. We found that the superconductivity is not fully suppressed until 9 T far above the critical field of Nb, which is associated with the nm-sized constriction of our SC/N junction, much smaller than the coherence length of the SC.

  18. Towards understanding the rate capability of layered transition metal oxides LiNiyMnyCo1-2yO2

    NASA Astrophysics Data System (ADS)

    Li, Zheng; Ban, Chunmei; Chernova, Natasha A.; Wu, Zhuangchun; Upreti, Shailesh; Dillon, Anne; Whittingham, M. Stanley

    2014-12-01

    This work attempts to understand the rate capability of layered transition metal oxides LiNiyMnyCo1-2yO2 (0.33 ≤ y ≤ 0.5). The rate capability of LiNiyMnyCo1-2yO2 increase with increasing Co in the compounds and with increasing amount of carbon additives in the electrodes. The lithium diffusion coefficients and electronic conductivities of LixNiyMnyCo1-2yO2 are investigated and compared. The 333 compound has higher diffusivity and electronic conductivity and thus better rate performance than 550. Chemical diffusion coefficients for both delithiation and lithiation of LixNiyMnyCo1-2yO2 investigated by GITT and PITT experiments are calculated to be around 10-10 cm2 s-1, lower than that of LixCoO2. The electronic conductivity of LixNiyMnyCo1-2yO2 is inferior compared to LixCoO2 at same temperature and delithiation stage. However, the LixNiyMnyCo1-2yO2 are able to deliver 55%-80% of theoretical capacity at 5 C with good electronic wiring in the composite electrode that make them very promising candidates for electric propulsion in terms of rate capability.

  19. Electrochemical Fabrication of Monolithic Electrodes with Core/Shell Sandwiched Transition Metal Oxide/Oxyhydroxide for High-Performance Energy Storage.

    PubMed

    Chang, Shaozhong; Pu, Jun; Wang, Jian; Du, Hongxiu; Zhou, Qingwen; Liu, Ziqiang; Zhu, Chao; Li, Jiachen; Zhang, Huigang

    2016-10-05

    Transition metal oxides/oxyhydroxides (TMOs) are promising high-capacity materials for electrochemical energy storage. However, the low rate and poor cyclability hinder practical applications. In this work, we developed a general electrochemical route to fabricate monolithic core/shell sandwiched structures, which are able to significantly improve the electrochemical properties of TMO electrodes by electrically wiring the insulating active materials and alleviating the adverse effects caused by volume changes using engineered porous structures. As an example, a lithium ion battery anode of porous MnO sandwiched between CNT and carbon demonstrates a high capacity of 554 mAh g(-1) even after 1000 cycles at 2 A g(-1). An all-solid-state symmetric pseudocapacitor consisting of CNT@MnOOH@polypyrrole exhibits a high specific capacitance of 148 F g(-1) and excellent capacitance retention (92% after 10000 cycles at 2 A g(-1)). Several other examples and applications have further confirmed the effectiveness of improving the electrochemical properties by core/shell sandwiched structures.

  20. Mechanical mixtures of metal oxides and phosphorus pentoxide as novel precursors for the synthesis of transition-metal phosphides.

    PubMed

    Guo, Lijuan; Zhao, Yu; Yao, Zhiwei

    2016-01-21

    This study presents a new type of precursor, mechanical mixtures of metal oxides (MOs) and phosphorus pentoxide (P2O5) are used to synthesize Ni2P, Co2P and MoP phosphides by the H2 reduction method. In addition, this is first report of common solid-state P2O5 being used as a P source for the synthesis of metal phosphides. The traditional precursors are usually prepared via a complicated preparation procedure involving dissolution, drying and calcination steps. However, these novel MOs/P2O5 precursors can be obtained only by simple mechanical mixing of the starting materials. Furthermore, unlike the direct transformation from amorphous phases to phosphides, various specific intermediates were involved in the transformation from MOs/P2O5 to phosphides. It is worthy to note that the dispersions of Ni2P, Co2P and MoP obtained from MOs/P2O5 precursors were superior to those of the corresponding phosphides prepared from the abovementioned traditional precursors. It is suggested that the morphology of the as-prepared metal phosphides might be inherited from the corresponding MOs. Based on the results of XRD, XPS, SEM and TEM, the formation pathway of phosphides can be defined as MOs/P2O5 precursors → complex intermediates (metals, metal phosphates and metal oxide-phosphates) → metal phosphides.

  1. Transition metal (Fe, Co and Ni) oxide nanoparticles grafted graphitic carbon nitrides as efficient optical limiters and recyclable photocatalysts

    NASA Astrophysics Data System (ADS)

    Sridharan, Kishore; Kuriakose, Tintu; Philip, Reji; Park, Tae Joo

    2014-07-01

    A single-step pyrolysis assisted route towards the large scale fabrication of metal oxide nanoparticles (Fe2O3, Co3O4 and NiO) ingrained in graphitic carbon nitride (GCN) is demonstrated. Urea, an abundantly available precursor, plays a dual role during the synthesis: while it acts as a reducing agent, it also gets converted to GCN. The formation of GCN and the in-situ growth and embedment of oxide nanoparticles are discussed on the basis of the experimental results. The wide absorption of the samples in the visible light region makes them suitable for nonlinear transmission and photocatalytic activity studies. Visible light photocatalytic activities of the samples are studied by monitoring the degradation of Rhodamine B dye. Optical limiting properties of the prepared samples are studied through the open aperture z-scan technique using 5 ns laser pulses at a wavelength of 532 nm. The cost-efficient and time saving synthetic approach is complemented by the magnetic behaviour of the samples, which enables their use as recyclable photocatalyst and magnetically controllable optical limiters.

  2. Transition metal catalyzed transformations of unsaturated molecules

    SciTech Connect

    Not Available

    1989-01-01

    In this proposal, research in three areas of transition metal catalyzed transformations of small molecules is proposed. The first encompasses metal catalyzed processes for the synthesis of several classes of carbon monoxide containing polymers. This section describes plans for metal catalyzed synthesis of (a) new alternating copolymers of carbon monoxide and olefins, (b) block copolymers consisting of segments of the olefin homopolymer and the olefin- carbon monoxide alternating copolymer, and (c) polycarbonates, polyesters and polyamides. The second section involves the examination of the chemistry of metal complexes incorporating oxo and hydrocarbyl ligands as a model for the heterogeneous oxidation of olefins and alkanes by meal oxides. Specific plans are to mimic in solution two proposed key steps in the heterogeneous oxidations. These are (a) the heterolytic cleavage of an alkyl (or allyl) C-H bond that is assisted by an oxo group, and (a) the transfer of an oxo group to the resultant metal bound alkyl (or allyl) ligand. The third section concerned with the development of a hybrid catalyst system involving both homogeneous and heterogeneous components for the oxidative functionalization of alkanes. The basic idea is to employ a transition metal in the elemental state to activate C-H bonds of alkanes and form surface alkyl groups. An additional transition metal species will be present in solution which will serve to oxidize these surface alkyl groups to ultimately yield oxidatively functionalized organic products. 57 refs.

  3. Thin films of metal oxides grown by chemical vapor deposition from volatile transition metal and lanthanide metal complexes

    NASA Astrophysics Data System (ADS)

    Pollard, Kimberly Dona

    1998-08-01

    This thesis describes the synthesis and characterization of novel volatile metal-organic complexes for the chemical vapor deposition (CVD) of metal oxides. Monomeric tantalum complexes, lbrack Ta(OEt)sb4(beta-diketonate)) are prepared by the acid-base reaction of lbrack Tasb2(OEt)sb{10}rbrack with a beta-diketone, (RC(O)CHsb2C(O)Rsp' for R = CHsb3, Rsp' = CFsb3; R = Rsp'=C(CHsb3)sb3; R = Csb3Fsb7,\\ Rsp'=C(CHsb3)sb3;\\ R=Rsp'=CFsb3; and R = Rsp' = CHsb3). The products are characterized spectroscopically. Thermal CVD using these complexes as precursors gave good quality Tasb2Osb5 thin films which are characterized by XPS, SEM, electrical measurements, and XRD. Factors affecting the film deposition such as the type of carrier gas and the temperature of the substrate were considered. Catalyst-enhanced CVD reactions with each of the precursors and a palladium catalyst, ((2-methylallyl)Pd(acac)), were studied as a lower temperature route to good quality Tasb2Osb5 films. The decomposition mechanism at the hot substrate surface was studied. Precursors for the formation of yttria by CVD were examined. New complexes of the form (Y(hfac)sb3(glyme)), (hfac = \\{CFsb3C(O)CHC(O)CFsb3\\}sp-,\\ glyme=CHsb3O(CHsb2CHsb2O)sb{n}CHsb3 for n = 1-4) were synthesized and characterized spectroscopically. X-ray structural determinations of three new complexes were obtained. CVD reaction conditions were determined which give YOF films and, with catalyst-enhanced CVD, reaction conditions which give selective formation of Ysb2Osb3, YOF, or YFsb3. The films were studied by XPS, SEM, and XRD. Decomposition mechanisms which lead to film formation, together with a possible route for fluorine atom transfer from the ligand to the metal resulting in fluorine incorporation, were studied by analysis of exhaust products using GC-MS. Novel precursors of the form lbrack Ce(hfac)sb3(glyme)rbrack,\\ (hfac=\\{CFsb3C(O)CHC(O)CFsb3\\}sp-,\\ glyme=CHsb3O(CHsb2CHsb2O)sb{n}CHsb3, n = 1-4) for CVD of ceria were

  4. Kinetic and mechanistic studies of reactive intermediates in photochemical and transition metal-assisted oxidation, decarboxylation and alkyl transfer reactions

    NASA Astrophysics Data System (ADS)

    Carraher, Jack McCaslin

    Reactive species like high-valent metal-oxo complexes and carbon and oxygen centered radicals are important intermediates in enzymatic systems, atmospheric chemistry, and industrial processes. Understanding the pathways by which these intermediates form, their relative reactivity, and their fate after reactions is of the utmost importance. Herein are described the mechanistic detail for the generation of several reactive intermediates, synthesis of precursors, characterization of precursors, and methods to direct the chemistry to more desirable outcomes yielding 'greener' sources of commodity chemicals and fuels. High-valent Chromium from Hydroperoxido-Chromium(III). The decomposition of pentaaquahydroperoxido chromium(III) ion (hereafter Cr aqOOH2+) in acidic aqueous solutions is kinetically complex and generates mixtures of products (Craq3+, HCrO 4-, H2O2, and O2). The yield of high-valent chromium products (known carcinogens) increased from a few percent at pH 1 to 70 % at pH 5.5 (near biological pH). Yields of H 2O2 increased with acid concentration. The reproducibility of the kinetic data was poor, but became simplified in the presence of H2O2 or 2,2‧-azinobis(3-ethylbenzothiazoline-6-sulfonate) dianion (ABTS2-). Both are capable of scavenging strongly oxidizing intermediates). The observed rate constants (pH 1, [O2] ≤ 0.03 mM) in the presence of these scavengers are independent of [scavenger] and within the error are the same (k,ABTS2- = (4.9 +/- 0.2) x 10-4 s-1 and kH2O2 = (5.3 +/- 0.7) x 10-4 s-1); indicating involvement of the scavengers in post-rate determining steps. In the presence of either scavenger, decomposition of CrOOH2+ obeyed a two-term rate law, k obs / s-1 = (6.7 +/- 0.7) x 10-4 + (7.6 +/- 1.1) x 10-4 [H+]. Effect of [H+] on the kinetics and the product distribution, cleaner kinetics in the presence of scavengers, and independence of kobs on [scavenger] suggest a dual-pathway mechanism for the decay of Craq OOH2+. The H+-catalyzed path

  5. Transition-Metal Oxide Superconductivity

    DTIC Science & Technology

    1988-04-20

    pyramidally coordinated complexes of the 02"- deficient compounds, and (iii) that ordering of the sources that produce the mixed-valence Cu2+ɛ+) ions in...With the strong antiferromagnetic exchange coupling of the Fe2+(3+) pairs in ferrites , no superconducting cells should be anticipated and only normal...I couplings dictate significant antiferromagnetic ordering and little chance of superconductivity. This group includes the common ferrite conduction

  6. Selenophene transition metal complexes

    SciTech Connect

    White, Carter James

    1994-07-27

    This research shows that selenophene transition metal complexes have a chemistry that is similar to their thiophene analogs. Selenophene coordination has been demonstrated and confirmed by molecular structure in both the η5- and the η1(Se)-coordination modes. The reaction chemistry of selenophene complexes closely resembles that of the analogous thiophene complexes. One major difference, however, is that selenophene is a better donor ligand than thiophene making the selenophene complexes more stable than the corresponding thiophene complexes. The 77Se NMR chemical shift values for selenophene complexes fall within distinct regions primarily depending on the coordination mode of the selenophene ligand. In the final paper, the C-H bond activation of η1(S)-bound thiophenes, η1(S)-benzothiophene and η1(Se)-bound selenophenes has been demonstrated. The deprotonation and rearrangement of the η1(E)-bound ligand to the carbon bound L-yl complex readily occurs in the presence of base. Reprotonation with a strong acid gives a carbene complex that is unreactive towards nucleophilic attack at the carbene carbon and is stable towards exposure to air. The molecular structure of [Cp(NO)(PPh3)Re(2-benzothioenylcarbene)]O3SCF3 was determined and contains a Re-C bond with substantial double bond character. Methyl substitution for the thienylcarbene or selenylcarbene gives a carbene that rearranges thermally to give back the η1(E)-bound complex. Based on these model reactions, a new mechanism for the H/D exchange of thiophene over the hydrodesulfurization catalyst has been proposed.

  7. Ligand field splittings in core level transitions for transition metal (TM) oxides: Tanabe-Sugano diagrams and (TM) dangling bonds in vacated O-atom defects

    NASA Astrophysics Data System (ADS)

    Lucovsky, Gerry; Wu, Kun; Pappas, Brian; Whitten, Jerry

    2013-04-01

    Defect states in the forbidden band-gap below the conduction band edge are active as electron traps in nano-grain high-) transition metal (TM) oxides with thickness >0.3 nm, e.g., ZrO2 and HfO2. These oxides have received considerable attention as gate-dielectrics in complementary metal oxide semiconductor (CMOS) devices, and more recently are emerging as candidates for charge storage and memory devices. To provide a theoretical basis for device functionality, ab-initio many-electron theory is combined with X-ray absorption spectroscopy (XAS) to study O K edge and TM core level transitions. These studies identify ligand field splittings (ΔLF) for defect state features,. When compared with those obtained from O-atom and TM-atom core spectroscopic transitions, this provides direct information about defect state sun-nm bonding arrangements. comparisons are made for (i) elemental TiO2 and Ti2O3 with different formal ionic charges, Ti4+ and Ti3+ and for (ii) Magneli Phase alloys, TinO2n-1, n is an integer 9>=n>3, and (TiO2)x(HfO2)1-x alloys. The alloys display multi-valent behavior from (i) different ionic-charge states, (ii} local bond-strain, and (iii) metallic hopping transport. The intrinsic bonding defects in TM oxides are identified as pairs of singly occupied dangling bonds. For 6-fold coordinated Ti-oxides defect excited states in 2nd derivative O K pre-edge spectra are essentially the same as single Ti-atom d2 transitions in Tanabe-Sugano (T-S) diagrams. O-vacated site defects in 8-fold coordinated ZrO2 and HfO2 are described by d8 T-S diagrams. T-S defect state ordering and splittings are functions of the coordination and symmetry of vacated site bordering TM atoms. ΔLF values from the analysis of T-S diagrams indicate medium range order (MRO) extending to 3rd and 4th nearest-neighbor (NN) TM-atoms. Values are different for 6-fold Ti, and 8-fold ZrO2 and HfO2, and scale inversely with differences in respective formal ionic radii. O-vacated site bonding

  8. Density functional theory studies on the oxidation of 5'-dGMP and 5'-dAMP by a platinum(IV) complex.

    PubMed

    Ariafard, Alireza; Tabatabaie, Elham S; Aghmasheh, Simin; Najaflo, Sahar; Yates, Brian F

    2012-08-06

    Density functional theory has been used to investigate the oxidation of a guanine nucleotide by platinum(IV), a process that can be important in the degradation of DNA. For the first time, we have provided a comprehensive mechanism for all of the steps in this process. A number of intermediates are predicted to occur but with short lifetimes that would make them difficult to observe experimentally. A key step in the mechanism is electron transfer from guanine to platinum(IV), and we show that this is driven by the loss of a chloride ligand from the platinum complex after nucleophilic attack of 5'-phosphate to C8 of guanine. We have investigated several different initial platinum(IV) guanine adducts and shown that the adduct formed from replacement of an axial chlorine ligand in the platinum(IV) complex undergoes oxidation more easily. We have studied adenine versus guanine adducts, and our results show that oxidation of the former is more difficult because of disruption of the aromatic π system that occurs during the process. Finally, our results show that the acidic hydrolysis step to form the final oxidized product occurs readily via an initial protonation of N7 of the guanine.

  9. Transition Metal Oxides for the Oxygen Reduction Reaction: Influence of the Oxidation States of the Metal and its Position on the Periodic Table.

    PubMed

    Toh, Rou Jun; Sofer, Zdeněk; Pumera, Martin

    2015-11-16

    Electrocatalysts have been developed to meet the needs and requirements of renewable energy applications. Metal oxides have been well explored and are promising for this purpose, however, many reports focus on only one or a few metal oxides at once. Herein, thirty metal oxides, which were either commercially available or synthesized by a simple and scalable method, were screened for comparison with regards to their electrocatalytic activity towards the oxygen reduction reaction (ORR). We show that although manganese, iron, cobalt, and nickel oxides generally displayed the ability to enhance the kinetics of oxygen reduction under alkaline conditions compared with bare glassy carbon, there is no significant correlation between the position of a metal on the periodic table and the electrocatalytic performance of its respective metal oxides. Moreover, it was also observed that mixed valent (+2, +3) oxides performed the poorest, compared with their respective pure metal oxides. These findings may be of paramount importance in the field of renewable energy.

  10. Synthesis, structure and magnetic properties of low dimensional spin systems in the 3d transition metal oxides and superconductivity in magnesium borate

    NASA Astrophysics Data System (ADS)

    Rogado, Nyrissa S.

    The major part of this thesis deals with the synthesis and magnetic characterization of low dimensional spin systems in the 3d transition metal oxides. Such systems are of interest due to the simplicity of their structures, allowing theoretical modeling of their electronic and magnetic behavior. Exotic properties are also often encountered. Studies involving layered magnetic materials based on triangle lattices, in particular, have resulted in many observations of unusual low temperature spin dynamics, and have presented new challenges for the theoretical understanding of magnetic systems. The magnetic properties of some compounds exhibiting these triangle-based lattices are described here in detail. BaNi2V2O8 is a spin-1 antiferromagnet on a honeycomb net. Susceptibility chi(T), specific heat C(T), and neutron diffraction measurements on this compound reveal the onset of antiferromagnetic (AFM) long-range ordering (LRO) close to 50 K. Diffuse diffraction peaks that are characteristic of two-dimensional (2D) short-range order are also observed up to 100 K. chi(T) of Ba(Ni1-xMgx)2V 2O8 shows the gradual disappearance of LRO with doping. Ni3V2O8, Co3V2O 8, and beta-Cu3V2O8 have spin-1, spin-3/2, and spin-1/2 magnetic lattices that are a new anisotropic variant of the Kagome net, wherein edge-sharing MO6 octahedra form the rises and rungs of a "Kagome staircase". The anisotropy largely relieves the geometric frustration, but results in rich magnetic behavior. Characterization of the magnetization of polycrystalline samples of Ni 3V2O8 and Co3V2O8 reveals that the compounds are ferrimagnetic in character. C(T) show four distinct magnetic phase transitions below 9 K for Ni3V2O 8 and two below 11 K for Co3V2O8. In the case of beta-Cu3V2O8, chi(T) and C(T) show the onset of short-range ordering at approximately 75 K, and a magnetic phase transition with the characteristics of antiferromagnetism at around 29 K. The second part of this thesis describes the bulk synthesis of

  11. Iodide effects in transition metal catalyzed reactions.

    PubMed

    Maitlis, Peter M; Haynes, Anthony; James, Brian R; Catellani, Marta; Chiusoli, Gian Paolo

    2004-11-07

    The unique properties of I(-) allow it to be involved in several different ways in reactions catalyzed by the late transition metals: in the oxidative addition, the migration, and the coupling/reductive elimination steps, as well as in substrate activation. Most steps are accelerated by I(-)(for example through an increased nucleophilicity of the metal center), but some are retarded, because a coordination site is blocked. The "soft" iodide ligand binds more strongly to soft metals (low oxidation state, electron rich, and polarizable) such as the later and heavier transition metals, than do the other halides, or N- and O-centered ligands. Hence in a catalytic cycle that includes the metal in a formally low oxidation state there will be less tendency for the metal to precipitate (and be removed from the cycle) in the presence of I(-) than most other ligands. Iodide is a good nucleophile and is also easily and reversibly oxidized to I(2). In addition, I(-) can play key roles in purely organic reactions that occur as part of a catalytic cycle. Thus to understand the function of iodide requires careful analysis, since two or sometimes more effects occur in different steps of one single cycle. Each of these topics is illustrated with examples of the influence of iodide from homogeneous catalytic reactions in the literature: methanol carbonylation to acetic acid and related reactions; CO hydrogenation; imine hydrogenation; and C-C and C-N coupling reactions. General features are summarised in the Conclusions.

  12. First insertion of NO into a transition-metal cluster-carbon bond: regioselective formation, structure, and reactions of the first alkanenitrile oxide complexes

    SciTech Connect

    Goldhaber, A.; Vollhardt, K.P.C.; Walborsky, E.C.; Wolfgruber, M.

    1986-02-05

    The chemistry of NO in the presence of transition metals is receiving considerable current attention because of its role in air pollution, its potential in organic synthesis by carbon-nitrogen bond formation, and an increasing interest in its basic features. The nitrosyl cation has been reacted with many mono and polynuclear metal systems, leading mainly to substitution and reduction. Insertion into alkyl and aryl metal bonds in mono-metallic complexes is documented. The unprecedented title reaction and some preliminary chemistry of the products are reported here. 27 references, 1 figure.

  13. Electrical Conductivity in Transition Metals

    ERIC Educational Resources Information Center

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  14. Nonaqueous synthesis of metal oxide nanoparticles: Short review and doped titanium dioxide as case study for the preparation of transition metal-doped oxide nanoparticles

    SciTech Connect

    Djerdj, Igor Arcon, Denis; Jaglicic, Zvonko; Niederberger, Markus

    2008-07-15

    The liquid-phase synthesis of metal oxide nanoparticles in organic solvents under exclusion of water is nowadays a well-established alternative to aqueous sol-gel chemistry. In this article, we highlight some of the advantages of these routes based on selected examples. The first part reviews some recent developments in the synthesis of ternary metal oxide nanoparticles by surfactant-free nonaqueous sol-gel routes, followed by the discussion of the morphology-controlled synthesis of lanthanum hydroxide nanoparticles, and the presentation of structural peculiarities of manganese oxide nanoparticles with an ordered Mn vacancy superstructure. These examples show that nonaqueous systems, on the one hand, allow the preparation of compositionally complex oxides, and, on the other hand, make use of the organic components (initially present or formed in situ) in the reaction mixture to tailor the morphology. Furthermore, obviously even the crystal structure can differ from the corresponding bulk material like in the case of MnO nanoparticles. In the second part of the paper we present original results regarding the synthesis of dilute magnetic semiconductor TiO{sub 2} nanoparticles doped with cobalt and iron. The structural characterization as well as the magnetic properties with special attention to the doping efficiency is discussed. - Graphical abstract: In the first part of this article, nonaqueous sol-gel routes to ternary metal oxide nanoparticles are briefly reviewed, followed by the discussion of the morphology-controlled synthesis of lanthanum hydroxide nanoparticles, and the appearance of an unprecedented superstructure in MnO nanoparticles. In the second part, doping experiments of TiO{sub 2} with Fe and Co are presented, along with their characterization including magnetic measurements.

  15. Engineering skyrmions in transition-metal multilayers for spintronics

    NASA Astrophysics Data System (ADS)

    Dupé, B.; Bihlmayer, G.; Böttcher, M.; Blügel, S.; Heinze, S.

    2016-06-01

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii-Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations.

  16. Engineering skyrmions in transition-metal multilayers for spintronics.

    PubMed

    Dupé, B; Bihlmayer, G; Böttcher, M; Blügel, S; Heinze, S

    2016-06-03

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii-Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations.

  17. Engineering skyrmions in transition-metal multilayers for spintronics

    PubMed Central

    Dupé, B.; Bihlmayer, G.; Böttcher, M.; Blügel, S.; Heinze, S.

    2016-01-01

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii–Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations. PMID:27257020

  18. PREFACE: INERA Workshop: Transition Metal Oxide Thin Films-functional Layers in "Smart windows" and Water Splitting Devices. Parallel session of the 18th International School on Condensed Matter Physics

    NASA Astrophysics Data System (ADS)

    2014-11-01

    The Special issue presents the papers for the INERA Workshop entitled "Transition Metal Oxides as Functional Layers in Smart windows and Water Splitting Devices", which was held in Varna, St. Konstantin and Elena, Bulgaria, from the 4th-6th September 2014. The Workshop is organized within the context of the INERA "Research and Innovation Capacity Strengthening of ISSP-BAS in Multifunctional Nanostructures", FP7 Project REGPOT 316309 program, European project of the Institute of Solid State Physics at the Bulgarian Academy of Sciences. There were 42 participants at the workshop, 16 from Sweden, Germany, Romania and Hungary, 11 invited lecturers, and 28 young participants. There were researchers present from prestigious European laboratories which are leaders in the field of transition metal oxide thin film technologies. The event contributed to training young researchers in innovative thin film technologies, as well as thin films characterization techniques. The topics of the Workshop cover the field of technology and investigation of thin oxide films as functional layers in "Smart windows" and "Water splitting" devices. The topics are related to the application of novel technologies for the preparation of transition metal oxide films and the modification of chromogenic properties towards the improvement of electrochromic and termochromic device parameters for possible industrial deployment. The Workshop addressed the following topics: Metal oxide films-functional layers in energy efficient devices; Photocatalysts and chemical sensing; Novel thin film technologies and applications; Methods of thin films characterizations; From the 37 abstracts sent, 21 manuscripts were written and later refereed. We appreciate the comments from all the referees, and we are grateful for their valuable contributions. Guest Editors: Assoc. Prof. Dr.Tatyana Ivanova Prof. DSc Kostadinka Gesheva Prof. DSc Hassan Chamatti Assoc. Prof. Dr. Georgi Popkirov Workshop Organizing Committee Prof

  19. Transition Metal Diborides as Electrode Material for MHD Direct Power Extraction: High-temperature Oxidation of ZrB2-HfB2 Solid Solution with LaB6 Addition

    NASA Astrophysics Data System (ADS)

    Sitler, Steven; Hill, Cody; Raja, Krishnan S.; Charit, Indrajit

    2016-06-01

    Transition metal borides are being considered for use as potential electrode coating materials in magnetohydrodynamic direct power extraction plants from coal-fired plasma. These electrode materials will be exposed to aggressive service conditions at high temperatures. Therefore, high-temperature oxidation resistance is an important property. Consolidated samples containing an equimolar solid solution of ZrB2-HfB2 with and without the addition of 1.8 mol pct LaB6 were prepared by ball milling of commercial boride material followed by spark plasma sintering. These samples were oxidized at 1773 K (1500 °C) in two different conditions: (1) as-sintered and (2) anodized (10 V in 0.1 M KOH electrolyte). Oxidation studies were carried out in 0.3 × 105 and 0.1 Pa oxygen partial pressures. The anodic oxide layers showed hafnium enrichment on the surface of the samples, whereas the high-temperature oxides showed zirconium enrichment. The anodized samples without LaB6 addition showed about 2.5 times higher oxidation resistance in high-oxygen partial pressures than the as-sintered samples. Addition of LaB6 improved the oxidation resistance in the as-sintered condition by about 30 pct in the high-oxygen partial pressure tests.

  20. Thermodynamic Hydricity of Transition Metal Hydrides.

    PubMed

    Wiedner, Eric S; Chambers, Matthew B; Pitman, Catherine L; Bullock, R Morris; Miller, Alexander J M; Appel, Aaron M

    2016-08-10

    Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.

  1. Microwave assisted synthesis of technologically important transition metal silicides

    SciTech Connect

    Vaidhyanathan, B.; Rao, K.J.

    1997-12-01

    A novel, simple, clean and fast microwave assisted method of preparing important transition metal silicides (MoSi{sub 2}, WSi{sub 2}, CoSi{sub 2}, and TiSi{sub 2}) has been described. Amorphous carbon is used both as a microwave susceptor and as a preventer of oxidation. {copyright} {ital 1997 Materials Research Society.}

  2. [Non-empirical interatomic potentials for transition metals]. Progress report

    SciTech Connect

    Not Available

    1993-05-01

    The report is divided into the following sections: potential-energy functions for d-band metals, potential-energy functions for aluminides and quasicrystals, electronic structure of complex structures and quasicrystals, potential-energy functions in transition-metal oxides, applications to defect structure and mechanical properties, and basic theory of interatomic potentials.

  3. [Non-empirical interatomic potentials for transition metals

    SciTech Connect

    Not Available

    1993-01-01

    The report is divided into the following sections: potential-energy functions for d-band metals, potential-energy functions for aluminides and quasicrystals, electronic structure of complex structures and quasicrystals, potential-energy functions in transition-metal oxides, applications to defect structure and mechanical properties, and basic theory of interatomic potentials.

  4. Transition metal-substituted cobalt ferrite nanoparticles for biomedical applications.

    PubMed

    Sanpo, Noppakun; Berndt, Christopher C; Wen, Cuie; Wang, James

    2013-03-01

    Transition metals of copper, zinc, chromium and nickel were substituted into cobalt ferrite nanoparticles via a sol-gel route using citric acid as a chelating agent. The microstructure and elemental composition were characterized using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy. Phase analysis of transition metal-substituted cobalt ferrite nanoparticles was performed via X-ray diffraction. Surface wettability was measured using the water contact angle technique. The surface roughness of all nanoparticles was measured using profilometry. Moreover, thermogravimetric analysis and differential scanning calorimetry were performed to determine the temperature at which the decomposition and oxidation of the chelating agents took place. Results indicated that the substitution of transition metals influences strongly the microstructure, crystal structure and antibacterial property of the cobalt ferrite nanoparticles.

  5. Methane activation on supported transition metal catalysts

    NASA Astrophysics Data System (ADS)

    Carstens, Jason Ned

    At present, there is considerable interest in utilizing methane more efficiently as both a fuel source and as a starting material for the production of other, more valuable products. However, methane is a very stable molecule with strong C-H bonds that are difficult to break. This makes methane combustion or the formation of carbon-carbon bonds quite difficult. The present work focuses on the use of supported transition metal catalysts as a means of activating methane (i.e. breaking C-H bonds) at low temperatures to produce valuable products or energy. The conversion of methane into higher hydrocarbons. A low temperature (<750 K), direct process to effectively convert methane into higher hydrocarbons would be quite desirable. Such a process is thermodynamically feasible if the reaction is broken up into two separate steps. The first step is the adsorption of methane onto a transition metal catalyst at temperatures above about 600 K to produce a surface carbon species. The second step is a low temperature (<373 K) hydrogenation to convert the carbon species into higher hydrocarbons. T. Koerts et al. have pursued this approach by dissociatively absorbing methane onto silica supported transition metal catalysts at temperatures ranging between 573 K and 773 K. The result was a surface carbonaceous species and hydrogen. In the second step, the carbonaceous intermediates produced small alkanes upon hydrogenation around 373 K. A maximum yield to higher hydrocarbons of 13% was obtained on a ruthenium catalyst. The present study was conducted to further investigate the nature of the carbonaceous species reported by Koerts. Methane combustion. This investigation was conducted in an effort to better understand the mechanism of methane combustion on Pd catalysts. In the first part of this study, temperature programmed reduction (TPR) was used to investigate the oxidation and reduction dynamics of a 10 wt% Pd/ZrOsb2 catalyst used for methane combustion. TPR experiments indicate

  6. Photochemistry of Transition Metal Hydrides.

    PubMed

    Perutz, Robin N; Procacci, Barbara

    2016-08-10

    Photochemical reactivity associated with metal-hydrogen bonds is widespread among metal hydride complexes and has played a critical part in opening up C-H bond activation. It has been exploited to design different types of photocatalytic reactions and to obtain NMR spectra of dilute solutions with a single pulse of an NMR spectrometer. Because photolysis can be performed on fast time scales and at low temperature, metal-hydride photochemistry has enabled determination of the molecular structure and rates of reaction of highly reactive intermediates. We identify five characteristic photoprocesses of metal monohydride complexes associated with the M-H bond, of which the most widespread are M-H homolysis and R-H reductive elimination. For metal dihydride complexes, the dominant photoprocess is reductive elimination of H2. Dihydrogen complexes typically lose H2 photochemically. The majority of photochemical reactions are likely to be dissociative, but hydride complexes may be designed with equilibrated excited states that undergo different photochemical reactions, including proton transfer or hydride transfer. The photochemical mechanisms of a few reactions have been analyzed by computational methods, including quantum dynamics. A section on specialist methods (time-resolved spectroscopy, matrix isolation, NMR, and computational methods) and a survey of transition metal hydride photochemistry organized by transition metal group complete the Review.

  7. Catabolism of hyaluronan: involvement of transition metals

    PubMed Central

    Šoltés, Ladislav; Kogan, Grigorij

    2009-01-01

    One of the very complex structures in the vertebrates is the joint. The main component of the joint is the synovial fluid with its high-molar-mass glycosaminoglycan hyaluronan, which turnover is approximately twelve hours. Since the synovial fluid does not contain any hyaluronidases, the fast hyaluronan catabolism is caused primarily by reductive-oxidative processes. Eight transition metals – V23, Mn25, Fe26, Co27, Ni28, Cu29, Zn30, and Mo42 – naturally occurring in living organism are essential for the control of various metabolic and signaling pathways. They are also the key elements in catabolism of hyaluronan in the joint. In this overview, the role of these metals in physiological and pathophysiological catabolism of hyaluronan is described. The participation of these metals in the initiation and propagation of the radical degradation hyaluronan is critically reviewed. PMID:21217859

  8. Polaronic Transport in Phosphate Glasses Containing Transition Metal Ions

    NASA Astrophysics Data System (ADS)

    Henderson, Mark

    The goal of this dissertation is to characterize the basic transport properties of phosphate glasses containing various amounts of TIs and to identify and explain any electronic phase transitions which may occur. The P2 O5-V2O5-WO3 (PVW) glass system will be analyzed to find the effect of TI concentration on conduction. In addition, the effect of the relative concentrations of network forming ions (SiO2 and P2O5) on transport will be studied in the P2O5-SiO2-Fe2O 3 (PSF) system. Also presented is a numerical study on a tight-binding model adapted for the purposes of modelling Gaussian traps, mimicking TI's, which are arranged in an extended network. The results of this project will contribute to the development of fundamental theories on the electronic transport in glasses containing mixtures of transition oxides as well as those containing multiple network formers without discernible phase separation. The present study on the PVW follows up on previous investigation into the effect on mixed transition ions in oxide glasses. Past research has focused on glasses containing transition metal ions from the 3d row. The inclusion of tungsten, a 5d transition metal, adds a layer of complexity through the mismatch of the energies of the orbitals contributing to localized states. The data have indicated that a transition reminiscent of a metal-insulator transition (MIT) occurs in this system as the concentration of tungsten increases. As opposed to some other MIT-like transitions found in phosphate glass systems, there seems to be no polaron to bipolaron conversion. Instead, the individual localization parameter for tungsten noticeably decreases dramatically at the transition point as well as the adiabaticity. Another distinctive feature of this project is the study of the PSF system, which contains two true network formers, phosphorous pentoxide (P2O 5) and silicon dioxide (SiO2). It is not usually possible to do a reliable investigation of the conduction properties of

  9. Synthesis of transition metal carbonitrides

    DOEpatents

    Munir, Zuhair A. R.; Eslamloo-Grami, Maryam

    1994-01-01

    Transition metal carbonitrides (in particular, titanium carbonitride, TiC.sub.0.5 N.sub.0.5) are synthesized by a self-propagating reaction between the metal (e.g., titanium) and carbon in a nitrogen atmosphere. Complete conversion to the carbonitride phase is achieved with the addition of TiN as diluent and with a nitrogen pressure .gtoreq.0.6 MPa. Thermodynamic phase-stability calculations and experimental characterizations of quenched samples provided revealed that the mechanism of formation of the carbonitride is a two-step process. The first step involves the formation of the nonstoichiometric carbide, TiC.sub.0.5, and is followed by the formation of the product by the incorporation of nitrogen in the defect-structure carbide.

  10. Reactivity of transition metal solvates

    NASA Astrophysics Data System (ADS)

    Berezin, Boris D.

    1991-09-01

    Reactivity data are generalised for one of the most important classes of complexes, solvates, which are quantitatively nearly unstudied. Various approaches to studying and describing the reactivity are compared with respect to solvation of the reagents and the transition state. The specifics and mechanism of ligand substitution in pure and mixed organic solvents are found. The reactivity of simple (homoleptic) and mixed solvates toward macrocycles is examined in detail using porphyrins as an example. The kinetic method of indicator reactions is applied to porphyrins in order to study the state of transition metal salts in organic solvents and the stability of the coordination spheres of acidosalts (MXnn-2), acidosolvates (MX2Sn-2) and their transition states. The concentration dependence of the rate constant of an indicator reaction is demonstrated to be due to a change in the inner coordination sphere and a shift of equilibria between the various coordination complexes. The bibliography includes 38 references.

  11. Finding new ternary transition metal selenides and sulphides

    NASA Astrophysics Data System (ADS)

    Narayan, Awadhesh; Bhutani, Ankita; Eckstein, James N.; Shoemaker, Daniel P.; Wagner, Lucas K.

    The transition metal oxides exhibit many interesting physical properties, and have been explored in detail over time. Recently, the transition metal chalchogenides including selenium and sulfur have been of interest because of their correlated electron properties, as seen in the iron based superconductors and the layered transition metal dichalchogenides. However, the chalchogenides are much less explored than the oxides, and there is an open question of whether there may be new materials heretofore undiscovered. We perform a systematic combined theoretical and experimental search over ternary phase diagrams that are empty in the Inorganic Crystal Structure Database containing cations, transition metals, and one of selenium or sulfur. In these 27 ternary systems, we use a probabilistic model to reduce the likelihood of false negative predictions, which results in a list of 24 candidate materials. We then conduct a variety of synthesis experiments to check the candidate materials for stability. While the prediction method did obtain compositions that are stable, none of the candidate materials formed in our experiments. We come to the conclusion that these phase diagrams are either truly empty or have unusual structures or synthesis requirements. This work was supported by the Center for Emergent Superconductivity, Department of Energy Frontier Research Center under Grant No. DEAC0298CH1088.

  12. Time-resolved XAFS spectroscopic studies of B-H and N-H oxidative addition to transition metal catalysts relevant to hydrogen storage

    SciTech Connect

    Bitterwolf, Thomas E.

    2014-12-09

    Successful catalytic dehydrogenation of aminoborane, H3NBH3, prompted questions as to the potential role of N-H oxidative addition in the mechanisms of these processes. N-H oxidative addition reactions are rare, and in all cases appear to involve initial dative bonding to the metal by the amine lone pairs followed by transfer of a proton to the basic metal. Aminoborane and its trimethylborane derivative block this mechanism and, in principle, should permit authentic N-H oxidative attrition to occur. Extensive experimental work failed to confirm this hypothesis. In all cases either B-H complexation or oxidative addition of solvent C-H bonds dominate the chemistry.

  13. Transition-metal-free Chemoselective Oxidative C-C Coupling of the sp(3) C-H Bond of Oxindoles with Arenes and Addition to Alkene: Synthesis of 3-Aryl Oxindoles, and Benzofuro- and Indoloindoles.

    PubMed

    Sattar, Moh; Rathore, Vandana; Prasad, Ch Durga; Kumar, Sangit

    2017-04-04

    A transition-metal (TM)-free and halogen-free NaOtBu-mediated oxidative cross-coupling between the sp(3) C-H bond of oxindoles and sp(2) C-H bond of nitroarenes has been developed to access 3-aryl substituted and 3,3-aryldisubstituted oxindoles in DMSO at room temperature in a short time. Interestingly, the sp(3) C-H bond of oxindoles could also react with styrene under TM-free conditions for the practical synthesis of quaternary 3,3-disubstituted oxindoles. The synthesized 3-oxindoles have also been further transformed into advanced heterocycles, that is, benzofuroindoles, indoloindoles, and substituted indoles. Mechanistic experiments of the reaction suggests the formation of an anion intermediate from the sp(3) C-H bond of oxindole by tert-butoxide base in DMSO. The addition of nitrobenzene to the in-situ generated carbanion leads to the 3-(nitrophenyl)oxindolyl carbanion in DMSO which is subsequently oxidized to 3-(nitro-aryl) oxindole by DMSO.

  14. Methodology for robust superhydrophobic fabrics and sponges from in situ growth of transition metal/metal oxide nanocrystals with thiol modification and their applications in oil/water separation.

    PubMed

    Wang, Ben; Li, Jing; Wang, Guiyuan; Liang, Weixin; Zhang, Yabin; Shi, Lei; Guo, Zhiguang; Liu, Weimin

    2013-03-13

    Solid surfaces possessing both superhydrophobic and superoleophilic properties have attracted significant interest in fundamental investigations and potential applications in the fields of self-cleaning surfaces, oil/water separation, and microfluidic channels. In this paper, a general methodology for robust superhydrophobic fabrics and sponges was proposed via the in situ growth of both transition-metal oxides and metallic nanocrystals, including the simple neutralization reaction and oxidation-reduction reaction. The porous surfaces coated with Group VIII and IB nanocrystals (such as Fe, Co, Ni, Cu, and Ag) can not only present multiscale surface roughness, but also readily coordinate with thiols, leading to special wettability. In our previous work, it has been confirmed that the interaction between the nanocrystals and thiols plays a significant role in the introduction of hydrophobic ingredients. In this work, it has been demonstrated that the efficient control of the nucleation and growth of Group VIII and IB nanocrystals on the porous surfaces becomes the key factor in the formation of multiscale surface roughness, resulting in the achievement of controllable special wettability. In addition, these as-prepared superhydrophobic and superoleophilic fabrics and sponges were successfully used for application in oil/water separation.

  15. Structure and potential mutagenicity of new hydantoin products from guanosine and 8-oxo-7,8-dihydroguanine oxidation by transition metals.

    PubMed

    Burrows, Cynthia J; Muller, James G; Kornyushyna, Olga; Luo, Wenchen; Duarte, Victor; Leipold, Michael D; David, Sheila S

    2002-10-01

    In vitro work in this laboratory has identified new DNA lesions resulting from further oxidation of a common biomarker of oxidative damage, 8-oxo-7,8-dihydroguanine (OG). The major product of oxidation of OG in a nucleoside, nucleotide, or single-stranded oligodeoxynucleotide using metal ions that act as one-electron oxidants is the new nucleoside derivative spiroiminodihydantoin (Sp). In duplex DNA an equilibrating mixture of two isomeric products, guanidinohydantoin (Gh) and iminoallantoin (Ia), is produced. These products are also formed by the overall four-electron oxidation of guanosine by photochemical processes involving O(2). DNA template strands containing either Sp or Gh/Ia generally acted as a block to DNA synthesis with the Klenow exo(-) fragment of pol I. However, when nucleotide insertion did occur opposite the lesions, only 2'-deoxyadenosine 5-triphosphate and 2'-deoxyguanine 5-triphosphate were used for primer extension. The Escherichia coli DNA repair enzyme Fpg was able to remove the Sp and Gh/Ia lesions from duplex DNA substrates, although the efficiency was depended on the base opposite the lesion.

  16. A Method for the Synthesis of Tetranitroglycoluril from Imidazo-[4,5-d]-imidazoles with Loss of Dinitrogen Oxide

    DTIC Science & Technology

    2014-12-01

    imidazoles are nitrated with the elimination of N2O to generate TNGU. This method of TNGU synthesis results in material that is less sensitive than...using known literature procedures [6] and attempts were made to further nitrate them in an effort to produce a novel material 8 (Figure 3). 2 Results...Abstract : A new method for the preparation of tetranitro- glycoluril (TNGU, Sorguyl) is described, in which imidazo- [4,5-d]-imidazoles are nitrated

  17. Synthesis, structural studies, and oxidation catalysis of the late-first-row-transition-metal complexes of a 2-pyridylmethyl pendant-armed ethylene cross-bridged cyclam.

    PubMed

    Jones, Donald G; Wilson, Kevin R; Cannon-Smith, Desiray J; Shircliff, Anthony D; Zhang, Zhan; Chen, Zhuqi; Prior, Timothy J; Yin, Guochuan; Hubin, Timothy J

    2015-03-02

    The first 2-pyridylmethyl pendant-armed ethylene cross-bridged cyclam ligand has been synthesized and successfully complexed to Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), and Zn(2+) cations. X-ray crystal structures were obtained for all six complexes and demonstrate pentadentate binding of the ligand with the requisite cis-V configuration of the cross-bridged cyclam ring in all cases, leaving a potential labile binding site cis to the pyridine donor for interaction of the complex with oxidants and/or substrates. The electronic properties of the complexes were evaluated using solid-state magnetic moment determination and acetonitrile solution electronic spectroscopy, which both agree with the crystal structure determination of high-spin divalent metal complexes in all cases. Cyclic voltammetry in acetonitrile revealed reversible redox processes in all but the Ni(2+) complex, suggesting that catalytic reactivity involving electron-transfer processes is possible for complexes of this ligand. Kinetic studies of the dissociation of the ligand from the copper(II) complex under strongly acidic conditions and elevated temperatures revealed that the pyridine pendant arm actually destabilizes the complex compared to the parent cross-bridged cyclam complex. Screening for oxidation catalysis using hydrogen peroxide as the terminal oxidant for the most biologically relevant Mn(2+), Fe(2+), and Cu(2+) complexes identified the Mn(2+) complex as a potential mild oxidation catalyst worthy of continued development.

  18. Platinum nanoparticles decorated robust binary transition metal nitride-carbon nanotubes hybrid as an efficient electrocatalyst for the methanol oxidation reaction

    NASA Astrophysics Data System (ADS)

    Zhan, Guohe; Fu, Zhenggao; Sun, Dalei; Pan, Zhanchang; Xiao, Chumin; Wu, Shoukun; Chen, Chun; Hu, Guanghui; Wei, Zhigang

    2016-09-01

    Titanium cobalt nitride (TiCoN)-CNTs hybrid support is prepared by a facile and efficient method, including a one-pot solvothermal process followed by a nitriding process, and this hybrid support is further decorated with Pt nanoparticles to catalyze the oxidation of methanol. The catalyst is characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and electrochemical measurements. Notably, Pt/CNTs@TiCoN catalyst exhibits a much higher mass activity and durability than that of the conventional Pt/C (JM) for methanol oxidation. The experimental data indicates that the CNTs@TiCoN hybrid support combines the merits of the CNTs's high conductivity and the superb corrosion resistance of external TiCoN coating.

  19. Impact Electrochemistry of Layered Transition Metal Dichalcogenides.

    PubMed

    Lim, Chee Shan; Tan, Shu Min; Sofer, Zdeněk; Pumera, Martin

    2015-08-25

    Layered transition metal dichalcogenides (TMDs) exhibit paramount importance in the electrocatalysis of the hydrogen evolution reaction. It is crucial to determine the size of the electrocatalytic particles as well as to establish their electrocatalytic activity, which occurs at the edges of these particles. Here, we show that individual TMD (MoS2, MoSe2, WS2, or WSe2; in general MX2) nanoparticles impacting an electrode surface provide well-defined current "spikes" in both the cathodic and anodic regions. These spikes originate from direct oxidation of the nanoparticles (from M(4+) to M(6+)) at the anodic region and from the electrocatalytic currents generated upon hydrogen evolution in the cathodic region. The positive correlation between the frequency of the impacts and the concentration of TMD nanoparticles is also demonstrated here, enabling determination of the concentration of TMD nanoparticles in colloidal form. In addition, the size of individual TMD nanoparticles can be evaluated using the charge passed during every spike. The capability of detecting both the "indirect" catalytic effect of an impacting TMD nanoparticle as well as "direct" oxidation indicates that the frequency of impacts in both the "indirect" and "direct" scenarios are comparable. This suggests that all TMD nanoparticles, which are electrochemically oxidizable (thus capable of donating electrons to electrodes), are also capable of catalyzing the hydrogen reduction reaction.

  20. O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

    SciTech Connect

    Yue, Ji -Li; Yang, Xiao -Qing; Zhou, Yong -Ning; Yu, Xiqian; Bak, Seong -Min; Fu, Zheng -Wen

    2015-10-09

    High rate capability and long cycle life are challenging goals for the development of room temperature sodium-ion batteries. Here we report a new single phase quaternary O3-type layer-structured transition metal oxide Na(NiCoFeTi)1/4O2 synthesized by a simple solid-state reaction as a new cathode material for sodium-ion batteries. It can deliver a reversible capacity of 90.6 mA h g–1 at a rate as high as 20C. At 5C, 75.0% of the initial specific capacity can be retained after 400 cycles with a capacity-decay rate of 0.07% per cycle, demonstrating a superior long-term cyclability at high current density. X-ray diffraction and absorption characterization revealed reversible phase transformations and electronic structural changes during the Na+ deintercalation/intercalation process. Ni, Co and Fe ions contribute to charge compensation during charge and discharge. Although Ti ions do not contribute to the charge transfer, they play a very important role in stabilizing the structure during charge and discharge by suppressing the Fe migration. Additionally, Ti substitution can also smooth the charge–discharge plateaus effectively, which provides a potential advantage for the commercialization of this material for room temperature sodium-ion batteries.

  1. O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

    DOE PAGES

    Yue, Ji -Li; Yang, Xiao -Qing; Zhou, Yong -Ning; ...

    2015-10-09

    High rate capability and long cycle life are challenging goals for the development of room temperature sodium-ion batteries. Here we report a new single phase quaternary O3-type layer-structured transition metal oxide Na(NiCoFeTi)1/4O2 synthesized by a simple solid-state reaction as a new cathode material for sodium-ion batteries. It can deliver a reversible capacity of 90.6 mA h g–1 at a rate as high as 20C. At 5C, 75.0% of the initial specific capacity can be retained after 400 cycles with a capacity-decay rate of 0.07% per cycle, demonstrating a superior long-term cyclability at high current density. X-ray diffraction and absorption characterizationmore » revealed reversible phase transformations and electronic structural changes during the Na+ deintercalation/intercalation process. Ni, Co and Fe ions contribute to charge compensation during charge and discharge. Although Ti ions do not contribute to the charge transfer, they play a very important role in stabilizing the structure during charge and discharge by suppressing the Fe migration. Additionally, Ti substitution can also smooth the charge–discharge plateaus effectively, which provides a potential advantage for the commercialization of this material for room temperature sodium-ion batteries.« less

  2. Preparation of nanocomposites containing nanoclusters of transition metals

    SciTech Connect

    Milne, S.B.; Lukehart, C.M., Wittig, J.E.

    1996-10-01

    New nanocomposites containing nanoclusters of transition metals have been prepared and characterized by TEM, XRD, and energy dispersive spectroscopy. Organometallic or other coordination compounds functionalized with trialkoxysilyl groups have been synthesized and covalently incorporated into silica xerogels using standard sol-gel techniques. Thermal oxidative treatment of these xerogels in air followed by reduction in hydrogen yielded the desired nanocomposite phases. Using these methods, Mo, Re, Fe, Ru, Os, Pd, Pt, Cu. and Ag nanocomposites have been prepared.

  3. Ballistic performance comparison of monolayer transition metal dichalcogenide MX{sub 2} (M = Mo, W; X = S, Se, Te) metal-oxide-semiconductor field effect transistors

    SciTech Connect

    Chang, Jiwon; Register, Leonard F.; Banerjee, Sanjay K.

    2014-02-28

    We study the transport properties of monolayer MX{sub 2} (M = Mo, W; X = S, Se, Te) n- and p-channel metal-oxide-semiconductor field effect transistors (MOSFETs) using full-band ballistic non-equilibrium Green's function simulations with an atomistic tight-binding Hamiltonian with hopping potentials obtained from density functional theory. We discuss the subthreshold slope, drain-induced barrier lowering (DIBL), as well as gate-induced drain leakage (GIDL) for different monolayer MX{sub 2} MOSFETs. We also report the possibility of negative differential resistance behavior in the output characteristics of nanoscale monolayer MX{sub 2} MOSFETs.

  4. Interfacial interaction in monolayer transition metal dichalcogenide/metal oxide heterostructures and its effects on electronic and optical properties: The case of MX2/CeO2

    NASA Astrophysics Data System (ADS)

    Yang, Ke; Huang, Wei-Qing; Hu, Wangyu; Huang, Gui-Fang; Wen, Shuangchun

    2017-01-01

    Using the density functional theory (DFT), we systematically study the interfacial interaction in monolayer MX2 (M = Mo, W; X = S, Se)/CeO2 heterostructures and its effects on electronic and optical properties. The interfacial interaction in the MX2/CeO2 heterostructures depends largely on chalcogens, and its strength determines the band gap variation and important electronic states at the band edges of the heterostructures. The MX2/CeO2 heterostructures with the same chalcogen have similar absorption spectra, from ultraviolet to near-infrared regions. These results suggest that chalcogens importantly determine the properties of MX2/metal oxide heterostructures.

  5. Photoinduced charge, ion & energy transfer processes at transition-metal coordination compounds anchored to mesoporous, nanocrystalline metal-oxide thin films

    NASA Astrophysics Data System (ADS)

    Ardo, Shane

    Photovoltaics provide a direct means of converting photons into useful, electric power; however traditional silicon-based technologies are too expensive for global commercialization. Dye-sensitized mesoporous semiconducting thin films, when utilized in regenerative photoelectrochemical cells, are one category of next generation photovoltaics that could eventually circumvent this issue. In fact, their architecture also affords a clear platform for implementation of a direct, solar fuel-forming system. The mechanisms involved in the myriad of molecular processes that occur in these molecular--solid-state hybrid materials are poorly understood. Thus, the overriding goal of this dissertation was to evaluate sensitized mesoporous, nanocrystalline metal-oxide thin films critically so as to elucidate mechanistic phenomena. Using transient and steady-state absorption and emission spectroscopies as well as (photo)electrochemistry, various previously unobserved processes have been identified. Chapter 2 demonstrates for the first time that the electric fields emanating from these charged thin films affect surface-anchored molecular sensitizers via a Stark effect. In most cases, further, but incomplete, ionic screening of the charged nanoparticles from the sensitizers, as non-Faradaic electrolyte redistribution, was spectroscopically inferred after rapid semiconductor charging. Chapter 3 highlights the reactivity of Co(I) coordination-compound catalysts anchored to anatase TiO2 thin-film electrodes. Visible-light excitation resulted in prompt excited-state electron injection into TiO2 while introduction of benzylbromide into the fluid solution surrounding the thin film led to a 2e--transfer, oxidative-addition reaction to Co1 forming a stable Co--benzyl product. Subsequent visible-light excitation initiated a photocatalytic cycle for C--C bond formation. Unique to the nanocrystalline thin films employed here, Chapter 4 demonstrates that traditional time-resolved polarization

  6. Solid-state transition metal chemistry with quinolin-4-yl-methyl-[N-(n-butyl)amino]-diphenylphosphine oxide (4-qmape): Crystal structure of the 4-qmape ligand

    NASA Astrophysics Data System (ADS)

    Żurowska, Bogumiła; Brzuszkiewicz, Anna; Boduszek, Bogdan

    2012-11-01

    A series of three perchlorate coordination compounds of bioactive diethyl quinolin-4-yl-methyl(N-butylamino)diphenylphosphine oxide (4-qmape) ligand, with the following stoichiometries [M(2-qmape)2](ClO4)2 Mdbnd Cu and Ni and [Co(2-qmape)2](ClO4)2, were obtained and studied. Stoichiometry and stereochemistry of the compounds was confirmed by spectroscopic and magnetic studies as well as by elemental analyses. In particular, the crystal structure of the free ligand was determined. The 4-qmape ligand has a potential capacity to coordinate to metal ions by following atoms: phosphoryl oxygen, amino nitrogen and quinolyl nitrogen. In studied compounds, 4-qmape adopts the didentate N,O-coordination mode, bonding metal centers through the phosphoryl oxygen and amino nitrogen. Quinoline nitrogen atom does not participate in coordination. The all complexes are monomeric with tetrahedral environment of metal ions. Magnetic studies (1.8-300 K) indicate existence of a very weak exchange coupling between metal centers in crystal lattice.

  7. Correlation between resistance-change effect in transition-metal oxides and secondary-electron contrast of scanning electron microscope images

    SciTech Connect

    Kinoshita, K.; Kishida, S.; Yoda, T.

    2011-09-15

    Conductive atomic-force microscopy (C-AFM) writing is attracting attention as a technique for clarifying the switching mechanism of resistive random-access memory by providing a wide area filled with filaments, which can be regarded as one filament with large radius. The writing area on a nickel-oxide (NiO) film formed by conductive atomic-force microscopy was observed by scanning electron microscope, and a correlation between the contrast in a secondary-electron image (SEI) and the resistance written by C-AFM was revealed. In addition, the dependence of the SEI contrast on the beam accelerating voltage (V{sub accel}) suggests that the resistance-change effect occurs near the surface of the NiO film. As for the effects of electron irradiation and vacuum annealing on the C-AFM writing area, it was shown that the resistance-change effect is caused by exchange of oxygen with the atmosphere at the surface of the NiO film. This result suggests that the low-resistance and high-resistance areas are, respectively, p-type Ni{sub 1+{delta}}O ({delta} < 0) and insulating (stoichiometric) or n-type Ni{sub 1+{delta}}O ({delta}{>=} 0).

  8. Transition-Metal Hydride Radical Cations.

    PubMed

    Hu, Yue; Shaw, Anthony P; Estes, Deven P; Norton, Jack R

    2016-08-10

    Transition-metal hydride radical cations (TMHRCs) are involved in a variety of chemical and biochemical reactions, making a more thorough understanding of their properties essential for explaining observed reactivity and for the eventual development of new applications. Generally, these species may be treated as the ones formed by one-electron oxidation of diamagnetic analogues that are neutral or cationic. Despite the importance of TMHRCs, the generally sensitive nature of these complexes has hindered their development. However, over the last four decades, many more TMHRCs have been synthesized, characterized, isolated, or hypothesized as reaction intermediates. This comprehensive review focuses on experimental studies of TMHRCs reported through the year 2014, with an emphasis on isolated and observed species. The methods used for the generation or synthesis of TMHRCs are surveyed, followed by a discussion about the stability of these complexes. The fundamental properties of TMHRCs, especially those pertaining to the M-H bond, are described, followed by a detailed treatment of decomposition pathways. Finally, reactions involving TMHRCs as intermediates are described.

  9. High-pressure synthesis, crystal structure, and magnetic properties of KSbO3-type 5d oxides K0.84OsO3 and Bi2.93Os3O11

    PubMed Central

    Yuan, Yahua; Feng, Hai L; Shi, Youguo; Tsujimoto, Yoshihiro; Belik, Alexei A; Matsushita, Yoshitaka; Arai, Masao; He, Jianfeng; Tanaka, Masahiko; Yamaura, Kazunari

    2014-01-01

    5d Solid-state oxides K0.84OsO3 (Os5.16+; 5d 2.84) and Bi2.93Os3O11 (Os4.40+; 5d 3.60) were synthesized under high-pressure and high-temperature conditions (6 GPa and 1500–1700 °C). Their crystal structures were determined by synchrotron x-ray diffraction and their 5d electronic properties and tunnel-like structure motifs were investigated. A KSbO3-type structure with a space group of Im-3 and Pn-3 was determined for K0.84OsO3 and Bi2.93Os3O11, respectively. The magnetic and electronic transport properties of the polycrystalline compounds were compared with those obtained theoretically. It was revealed that the 5d tunnel-like structures are paramagnetic with metallic charge conduction at temperatures above 2 K. This was similar to what was observed for structurally relevant 5d oxides, including Bi3Re3O11 (Re4.33+; 5d 2.66) and Ba2Ir3O9 (Ir4.66+; 5d 4.33). The absence of long-range magnetic order seems to be common among 5d KSbO3-like oxides, regardless of the number of 5d electrons (between 2.6 and 4.3 per 5d atom). PMID:27877729

  10. Transition Metal Nitrides for Electrocatalytic Energy Conversion: Opportunities and Challenges.

    PubMed

    Xie, Junfeng; Xie, Yi

    2016-03-07

    Electrocatalytic energy conversion has been considered as one of the most efficient and promising pathways for realizing energy storage and energy utilization in modern society. To improve electrocatalytic reactions, specific catalysts are needed to lower the overpotential. In the search for efficient alternatives to noble metal catalysts, transition metal nitrides have attracted considerable interest due to their high catalytic activity and unique electronic structure. Over the past few decades, numerous nitride-based catalysts have been explored with respect to their ability to drive various electrocatalytic reactions, such as the hydrogen evolution reaction and the oxygen evolution reaction to achieve water splitting and the oxygen reduction reaction coupled with the methanol oxidation reaction to construct fuel cells or rechargeable Li-O2 batteries. This Minireview provides a brief overview of recent progress on electrocatalysts based on transition metal nitrides, and outlines the current challenges and future opportunities.

  11. Intrastrand G-U cross-links generated by the oxidation of guanine in 5'-d(GCU) and 5'-r(GCU).

    PubMed

    Crean, Conor; Geacintov, Nicholas E; Shafirovich, Vladimir

    2008-10-15

    It has been suggested that carbonate radical anions are biologically important because they may be produced during the inflammatory response. The carbonate radicals can selectively oxidize guanine in DNA and RNA by one-electron transfer mechanisms and the guanine radicals thus formed decay by diverse competing pathways with other free radicals or nucleophiles. Using a photochemical method to generate CO(3)(-) radicals in vitro, we compare the distributions of products initiated by the one-electron oxidation of guanine in the trinucleotides 5'-r(GpCpU) and 5'-d(GpCpU) in aqueous buffer solutions (pH 7.5). Similar distributions of stable end products identified by LC-MS/MS methods were found in both cases. The guanine oxidation products include the diastereomeric pair of spiroiminodihydantoin (Sp) and 2,5-diamino-4H-imidazolone (Iz). In addition, intrastrand cross-linked products involving covalent bonds between the G and the U bases (GCU) were also found, although with different relative yields in the 2'-deoxy- and the ribotrinucleotides. The positive-ion MS/MS spectra of the 5'-r(GpCpU) and 5'-d(GpCpU) products clearly indicate the presence of covalently linked G-U products that have a mass smaller by 2 Da than the sum of the G and U bases in both types of trinucleotides. The 5'-d(GCU) cross-linked product was further characterized by 1D and 2D NMR methods that confirm its cyclic structure in which the guanine C8 atom is covalently linked to the uracil N3 atom.

  12. Structural and Electronic Properties of Reduced Transition Metal Oxide Clusters, M 3 O 8 and M 3 O 8 - (M = Cr, W), from Photoelectron Spectroscopy and Quantum Chemical Calculations

    SciTech Connect

    Li, Shenggang; Zhai, Hua-Jin; Wang, Lai-Sheng; Dixon, David A.

    2009-09-28

    We report a comparative study of reduced transition metal oxide clusters, M₃O₈⁻ (M = Cr, W) anions and their neutrals, via anion photoelectron spectroscopy (PES) and density functional theory (DFT) and molecular orbital theory (CCSD(T)) calculations. Well-resolved PES spectra are obtained for M₃O₈⁻ (M = Cr, W) at 193 and 157 nm photon energies. Different PES spectra are observed for M = Cr versus M = W. ExtensiveDFT and CCSD(T) calculations are performed to locate the ground and low-lying excited states for the neutrals and anions. The ground states of Cr₃O₈ and Cr₃O₈⁻ are predicted to be the ³B₂ and ⁴B₂ states of a C₂v structure, respectively, revealing ferromagnetic spin coupling for Cr 3d electrons. In contrast, the ground states of W₃O₈ and W₃O₈⁻ are predicted to be the ¹A' state (Cs symmetry) and the ²A₁ state (C₂v symmetry), respectively, showing metal-metal d-d bonding in the anion. The current cluster geometries are in qualitative agreement with prior DFT studies at the PBE level for M = Cr and the B3LYP level for M = W. The BP86 and PW91 functionals significantly outperform the B3LYP functional for the Cr species, in terms of relative energies, electron detachment energies, and electronic excitation energies, whereas the B3LYP functional is better for the W species. Accurate heats of formation for the ground states of M₃O₈ are calculated from the clustering energies and the heats of formation of MO₂ and MO₃. The energetics have been used to predict redox reaction thermochemistry.

  13. Microwave-assisted synthesis of transition metal phosphide

    SciTech Connect

    Viswanathan, Tito

    2014-12-30

    A method of synthesizing transition metal phosphide. In one embodiment, the method has the steps of preparing a transition metal lignosulfonate, mixing the transition metal lignosulfonate with phosphoric acid to form a mixture, and subjecting the mixture to a microwave radiation for a duration of time effective to obtain a transition metal phosphide.

  14. Signatures of correlation in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Gatti, Matteo; Guzzo, Matteo; Reining, Lucia

    Photoemission satellites are a genuine fingerprint of electronic correlation that cannot be interpreted within the quasiparticle band-structure picture. Here we show that they can be understood in terms of the coupling between different elementary excitations, as in the case of plasmon sidebands. Using examples from different correlated materials, we discuss how this coupling can be explained by advanced calculations based on first-principles many-body perturbation theory that combine GW-like approximations for the self-energy with the cumulant expansion of the Green's function. This approach is not limited to low-energy satellites, but allows for a consistent explanation of signatures of correlation over a wide range of binding energies.

  15. The role of transition metal ions chemistry on multiphase chemistry

    NASA Astrophysics Data System (ADS)

    Deguillaume, L.; Leriche, M.; Monod, A.; Chaumerliac, N.

    2003-04-01

    A modelling study of the role of transition metal ions chemistry on cloud chemistry is presented. First, new developments of the Model of Multiphase Cloud Chemistry (M2C2) are described: the transition metal ions reactivity and variable photolysis in the aqueous phase. Secondly, three summertime scenarios describing urban, remote and marine conditions are simulated. First, comparisons between results from M2C2 and from CAPRAM2.3 models for the same scenarios (Herrmann et al., 2000) show a good agreement between the two models with respect to their different chemical mechanisms. Secondly, chemical regimes in cloud are analysed to understand the role of transition metal ions chemistry on cloud chemistry. This study focuses on HOx chemistry, which afterwards influences the sulphur and the VOCs chemistry in droplets. The ratio of Fe(II)/Fe(III) exhibits a diurnal variation with values in agreement with the few measurements of Fe speciation available. In the polluted case, sensitivity tests with and without TMI chemistry, show an enhancement of OH concentration in the aqueous phase when TMI chemistry is considered. This implies a more important oxidation of VOCs in droplets, which produces the HO2 radical, the hydrogen peroxide precursor. In fact, the HO2 radical is mainly converted into hydrogen peroxide by reactions between HO2/O2- radicals with Fe(II). This production of hydrogen peroxide leads to a rapid conversion of S(IV) into S(VI) at the beginning of the simulation.

  16. Method of boronizing transition metal surfaces

    DOEpatents

    Koyama, Koichiro; Shimotake, Hiroshi

    1983-01-01

    A method is presented for preparing a boride layer on a transition metal substrate for use in corrosive environments or as a harden surface in machine applications. This method is particularly useful in treating current collectors for use within a high temperature and corrosive electrochemical cell environment. A melt of a alkali metal boride tetrafluoride salt including such as KF to lower its melting point is prepared including a dissolved boron containing material, for instance NiB, MnB.sub.2, or CrB.sub.2. A transition metal to be coated is immersed in the melt at a temperature of no more than 700.degree. C. and a surface boride layer of that transition metal is formed within a period of about 24 hours on the substrate surface.

  17. Method of boronizing transition metal surfaces

    DOEpatents

    Koyama, Koichiro; Shimotake, Hiroshi.

    1983-08-16

    A method is presented for preparing a boride layer on a transition metal substrate for use in corrosive environments or as a harden surface in machine applications. This method is particularly useful in treating current collectors for use within a high temperature and corrosive electrochemical cell environment. A melt of a alkali metal boride tetrafluoride salt including such as KF to lower its melting point is prepared including a dissolved boron containing material, for instance NiB, MnB[sub 2], or CrB[sub 2]. A transition metal to be coated is immersed in the melt at a temperature of no more than 700 C and a surface boride layer of that transition metal is formed within a period of about 24 hours on the substrate surface. 4 figs.

  18. Transition metal catalysis in confined spaces.

    PubMed

    Leenders, Stefan H A M; Gramage-Doria, Rafael; de Bruin, Bas; Reek, Joost N H

    2015-01-21

    Transition metal catalysis plays an important role in both industry and in academia where selectivity, activity and stability are crucial parameters to control. Next to changing the structure of the ligand, introducing a confined space as a second coordination sphere around a metal catalyst has recently been shown to be a viable method to induce new selectivity and activity in transition metal catalysis. In this review we focus on supramolecular strategies to encapsulate transition metal complexes with the aim of controlling the selectivity via the second coordination sphere. As we will discuss, catalyst confinement can result in selective processes that are impossible or difficult to achieve by traditional methods. We will describe the template-ligand approach as well as the host-guest approach to arrive at such supramolecular systems and discuss how the performance of the catalyst is enhanced by confining it in a molecular container.

  19. Transition Metals and Virulence in Bacteria

    PubMed Central

    Palmer, Lauren D.; Skaar, Eric P.

    2016-01-01

    Transition metals are required trace elements for all forms of life. Due to their unique inorganic and redox properties, transition metals serve as cofactors for enzymes and other proteins. In bacterial pathogenesis, the vertebrate host represents a rich source of nutrient metals, and bacteria have evolved diverse metal acquisition strategies. Host metal homeostasis changes dramatically in response to bacterial infections, including production of metal sequestering proteins and the bombardment of bacteria with toxic levels of metals. Presumably, in response, bacteria have evolved systems to subvert metal sequestration and toxicity. The coevolution of hosts and their bacterial pathogens in the battle for metals has uncovered emerging paradigms in social microbiology, rapid evolution, host specificity, and metal homeostasis across domains. This review focuses on recent advances and open questions in our understanding of the complex role of transition metals at the host-pathogen interface. PMID:27617971

  20. Generic trend of work functions in transition-metal carbides and nitrides

    SciTech Connect

    Yoshitake, Michiko

    2014-11-15

    Transition-metal carbides and nitrides (TMCs and TMNs) are promising electrode materials for various electronic devices such as metal-oxide-semiconductor field-effect transistors and metal-insulator-metal capacitors. In this paper, the work functions of TMCs and TMNs are discussed systematically. Based upon the origin of the work function, the effect upon transition metal species by different periodic table groups is explained, carbides are compared with nitrides for the same transition metal, and the effect of carbon or nitrogen vacancies is discussed. In addition, a method to estimate the generic trend of the work function is proposed for TMC{sub x}, TMN{sub x}, TMC{sub 1−y}N{sub y} (transition metal carbonitrides), and TM{sub 1−z}TM′{sub z}C (alloy carbides)

  1. Activation of methane by transition metal-substituted aluminophosphate molecular sieves

    DOEpatents

    Iton, Lennox E.; Maroni, Victor A.

    1991-01-01

    Aluminophosphate molecular sieves substituted with cobalt, manganese or iron and having the AlPO.sub.4 -34 or AlPO.sub.4 -5, or related AlPO.sub.4 structure activate methane starting at approximately 350.degree. C. Between 400.degree. and 500.degree. C. and at methane pressures .ltoreq.1 atmosphere the rate of methane conversion increases steadily with typical conversion efficiencies at 500.degree. C. approaching 50% and selectivity to the production of C.sub.2+ hydrocarbons approaching 100%. The activation mechanism is based on reduction of the transition metal(III) form of the molecular sieve to the transition metal(II) form with accompanying oxidative dehydrogenation of the methane. Reoxidation of the - transition metal(II) form to the transition metal(III) form can be done either chemically (e.g., using O.sub.2) or electrochemically.

  2. Transition Metal-Involved Photon Upconversion.

    PubMed

    Ye, Shi; Song, En-Hai; Zhang, Qin-Yuan

    2016-12-01

    Upconversion (UC) luminescence of lanthanide ions (Ln(3+)) has been extensively investigated for several decades and is a constant research hotspot owing to its fundamental significance and widespread applications. In contrast to the multiple and fixed UC emissions of Ln(3+), transition metal (TM) ions, e.g., Mn(2+), usually possess a single broadband emission due to its 3d(5) electronic configuration. Wavelength-tuneable single UC emission can be achieved in some TM ion-activated systems ascribed to the susceptibility of d electrons to the chemical environment, which is appealing in molecular sensing and lighting. Moreover, the UC emissions of Ln(3+) can be modulated by TM ions (specifically d-block element ions with unfilled d orbitals), which benefits from the specific metastable energy levels of Ln(3+) owing to the well-shielded 4f electrons and tuneable energy levels of the TM ions. The electric versatility of d(0) ion-containing hosts (d(0) normally viewed as charged anion groups, such as MoO6(6-) and TiO4(4-)) may also have a strong influence on the electric dipole transition of Ln(3+), resulting in multifunctional properties of modulated UC emission and electrical behaviour, such as ferroelectricity and oxide-ion conductivity. This review focuses on recent advances in the room temperature (RT) UC of TM ions, the UC of Ln(3+) tuned by TM or d(0) ions, and the UC of d(0) ion-centred groups, as well as their potential applications in bioimaging, solar cells and multifunctional devices.

  3. Transition metal-free decarboxylative alkylation reactions.

    PubMed

    Liu, Ping; Zhang, Guanghui; Sun, Peipei

    2016-11-22

    This review summarizes advances in the decarboxylative alkylation of carboxylic acids and their derivatives under transition metal-free conditions in recent years. Unlike most transition metal-catalyzed decarboxylative coupling reactions which tend to undergo catalytic cycles, the mechanisms of reactions under metal-free conditions are usually diverse and even ambiguous in some cases. This article offers an overview of reaction types and their corresponding mechanisms, highlights some of the advantages and limitations, and focuses on introducing UV and visible light-induced, organocatalyst and peroxide promoted radical processes for decarboxylative alkylation and the formation of C-C bonds.

  4. Mid-IR Transition Metal Lasers (Postprint)

    DTIC Science & Technology

    2007-01-01

    alexandrite was demonstrated in 1979. [2] Cr4+ and Cr2+ infrared laser materials took even longer to be discovered. However, transition metal laser...already been mentioned. Other transition metal laser ions such as Cr3+ in alexandrite [19] and Ti3+ in YAlO3 [20] have excited state absorption (ESA...Washington, DC. 19. Shand, M.L., J.C. Walling, and R.C. Morris, Excited-state absorption in the pump region of alexandrite , Journal of Applied Physics

  5. Alkane Soluble Transition Metal Complexes.

    DTIC Science & Technology

    1983-10-01

    A.l. Shilov and A.A. Uhtelrman, Cooed. Chim. ev., 1977, 54 , 97. 4. O.W. Parshall, "Catalysis", Vol 1. Chemical Society Spec. Per. Report (3d C. Kemball...freshly pulverized, fused wete prepared by standard procedures. The method of potassium hydrogusmiphbsa at 16 *C for 8 h or until the de- Clark wasn... method as *Hsaism*UaeLtAl 6 CRW MW OIOIflWY VOL IL NO.61 IM M 0. MAML. & FRAN= AND P. it. mAyn1zy described pesavituly.1 The oxides (P-XC.M.)sP-O

  6. An insight into fluorescent transition metal complexes.

    PubMed

    Chia, Y Y; Tay, M G

    2014-09-21

    The emission from transition metal complexes is usually produced from triplet excited states. Owing to strong spin-orbit coupling (SOC), the fast conversion of singlet to triplet excited states via intersystem crossing (ISC) is facilitated. Hence, in transition metal complexes, emission from singlet excited states is not favoured. Nevertheless, a number of examples of transition metal complexes that fluoresce with high intensity have been found and some of them were even comprehensively studied. In general, three common photophysical characteristics are used for the identification of fluorescent emission from a transition metal complex: emission lifetimes on the nanosecond scale; a small Stokes shift; and intense emission under aerated conditions. For most of the complexes reviewed here, singlet emission is the result of ligand-based fluorescence, which is the dominant emission process due to poor metal-ligand interactions leading to a small metal contribution in the excited states, and a competitive fluorescence rate constant when compared to the ISC rate constant. In addition to the pure fluorescence from metal complexes, another two types of fluorescent emissions were also reviewed, namely, delayed fluorescence and fluorescence-phosphorescence dual emissions. Both emissions also have their respective unique characteristics, and thus they are discussed in this perspective.

  7. High Pressure Synthesis of Transition Metal Carbonyls.

    ERIC Educational Resources Information Center

    Hagen, A. P.; And Others

    1979-01-01

    Presents an experiment which uses readily available starting materials and inexpensive equipment for synthesis of transition metal carbonyls at 1000 atm and which is intended to give students experience in techniques used in research and industry. Safety precautions are emphasized. (Author/SA)

  8. Magnetic properties of nanocrystalline transition metals

    NASA Astrophysics Data System (ADS)

    Aus, Martin J.

    1999-09-01

    In the past decade, considerable attention has been devoted to the nanoprocessing of magnetic materials to enhance specific magnetic properties. For nanocrystalline materials in which the grain size approaches the dimensions of the domain wall thickness of conventional materials, considerable changes in magnetic behaviour are expected. In the present work, various electrodeposited ferromagnetic nanocrystalline pure metals and alloys were characterized by using a vibrating sample magnetometer. The systems investigated include pure Ni and Co as well as alloys of Ni-P, Ni-Fe and Co-Fe. These studies explored the effect of gram size on coercivity, indicating that the crystallographic texture is more significant than gram size. In addition, these studies reported, for the first time, that saturation magnetization of pore-free electroplated bulk nanocrystalline transition metals and their alloys is relatively little affected by grain size. In contrast, previously reported results for ultra-fine particles and nanomaterials produced from compacted powders showed a strong decrease in saturation magnetization with decreasing grain size. The difference in results for pore-free electrodeposits and ultrafine particles/compacted powders has been attributed to antiferromagnetic surface oxide layers, which is a direct result of large internal porosity in the latter group of materials. Further magnetic studies were completed on nanocrystalline electrodeposits produced by magnetoelectrohydrolysis. The effects of applied magnetic field strength and substrate orientation on saturation magnetization and coercivity of Ni-Fe and Co were explored. The results have shown that both nanoprocessing and electroplating in a magnetic field can improve soft magnetic properties by lowering the coercivity. Thermomagnetic studies examined saturation magnetization as a function of temperature, Curie temperature and coercivity changes during annealing. The Curie temperatures of electrodeposited

  9. (Electronic structure and reactivities of transition metal clusters)

    SciTech Connect

    Not Available

    1992-01-01

    The following are reported: theoretical calculations (configuration interaction, relativistic effective core potentials, polyatomics, CASSCF); proposed theoretical studies (clusters of Cu, Ag, Au, Ni, Pt, Pd, Rh, Ir, Os, Ru; transition metal cluster ions; transition metal carbide clusters; bimetallic mixed transition metal clusters); reactivity studies on transition metal clusters (reactivity with H{sub 2}, C{sub 2}H{sub 4}, hydrocarbons; NO and CO chemisorption on surfaces). Computer facilities and codes to be used, are described. 192 refs, 13 figs.

  10. Transition-Metal Substitution Doping in Synthetic Atomically Thin Semiconductors.

    PubMed

    Gao, Jian; Kim, Young Duck; Liang, Liangbo; Idrobo, Juan Carlos; Chow, Phil; Tan, Jiawei; Li, Baichang; Li, Lu; Sumpter, Bobby G; Lu, Toh-Ming; Meunier, Vincent; Hone, James; Koratkar, Nikhil

    2016-11-01

    Large-area "in situ" transition-metal substitution doping for chemical-vapor-deposited semiconducting transition-metal-dichalcogenide monolayers deposited on dielectric substrates is demonstrated. In this approach, the transition-metal substitution is stable and preserves the monolayer's semiconducting nature, along with other attractive characteristics, including direct-bandgap photoluminescence.

  11. Single-layer transition metal sulfide catalysts

    DOEpatents

    Thoma, Steven G.

    2011-05-31

    Transition Metal Sulfides (TMS), such as molybdenum disulfide (MoS.sub.2), are the petroleum industry's "workhorse" catalysts for upgrading heavy petroleum feedstocks and removing sulfur, nitrogen and other pollutants from fuels. We have developed an improved synthesis technique to produce SLTMS catalysts, such as molybdenum disulfide, with potentially greater activity and specificity than those currently available. Applications for this technology include heavy feed upgrading, in-situ catalysis, bio-fuel conversion and coal liquefaction.

  12. Lanthanoid-transition-metal bonding in bismetallocenes.

    PubMed

    Butovskii, Mikhail V; Oelkers, Benjamin; Bauer, Tobias; Bakker, Jacinta M; Bezugly, Viktor; Wagner, Frank R; Kempe, Rhett

    2014-03-03

    Bismetallocenes [Cp2 LuReCp2 ] and [Cp*2 LaReCp2 ] (Cp=cyclopentadienyl; Cp*=pentamethylcyclopentadienyl) were prepared using different synthetic strategies. Salt metathesis-performed in aromatic hydrocarbons to avoid degradation pathways caused by THF-were identified as an attractive alternative to alkane elimination. Although alkane elimination is more attractive in the sense of its less elaborate workup, the rate of the reaction shows a strong dependence on the ionic radius of Ln(3+) (Ln=lanthanide) within a given ligand set. Steric hindrance can cause a dramatic decrease in the reaction rate of alkane elimination. In this case, salt metathesis should be considered the better alternative. Covalent bonding interactions between the Ln and transition-metal (TM) cations has been quantified on the basis of the delocalization index. Its magnitude lies within the range characteristic for bonds between transition metals. Secondary interactions were identified between carbon atoms of the Cp ligand of the transition metal and the Ln cation. Model calculations clearly indicated that the size of these interactions depends on the capability of the TM atom to act as an electron donor (i.e., a Lewis base). The consequences can even be derived from structural details. The observed clear dependency of the LuRu and interfragment LuC bonding on the THF coordination of the Lu atom points to a tunable Lewis acidity at the Ln site, which provides a method of significantly influencing the structure and the interfragment bonding.

  13. Corrosion behavior of mesoporous transition metal nitrides

    SciTech Connect

    Yang, Minghui; Allen, Amy J.; Nguyen, Minh T.; Ralston, Walter T.; MacLeod, Michelle J.; DiSalvo, Francis J.

    2013-09-15

    Transition metal nitrides (TMN) have many desirable characteristics such as high hardness and good thermal stability under reducing conditions. This work reports an initial survey of the chemical stability of mesoporous TMNs (TM=Nb, V, Cr and Ti) in water at 80 °C at neutral, acidic and alkaline pH. The mesoporous TMNs had specific surface areas of 25–60 m{sup 2}/g with average pore sizes ranging from 10 to 50 nm. The high surface areas of these materials enhance the rate of corrosion per unit mass over that of a bulk material, making detection of corrosion much easier. The products were characterized by Rietveld refinement of powder X-ray diffraction (PXRD) patterns and by scanning electron microscopy (SEM). Several nitrides have corrosion rates that are, within error, not distinguishable from zero (±1 Å/day). Of the nitrides examined, CrN appears to be the most corrosion resistant under acidic conditions. None of the nitrides studied are corrosion resistant under alkaline conditions. - Graphical abstract: Corrosion behavior of mesoporous transition metal nitrides (TM=Nb, V, Cr and Ti) in acidic and alkaline solutions at 80 °C for 2 weeks. Display Omitted - highlights: • Corrosion rates of mesoporous transition metal nitrides in aqueous solution is reported. • The mesoporous TMNs had surface areas of 25–60 m{sup 2}/g. • CrN is the most corrosion resistant under the conditions studied.

  14. Transition metal-induced degradation of a pharmaceutical compound in reversed-phase liquid chromatographic analysis.

    PubMed

    Wang, Qinggang; He, Brian Lingfeng; Zhang, Jin; Huang, Yande; Kleintop, Brent; Raglione, Thomas

    2015-01-01

    Drug degradation that occurs in HPLC analysis, during either sample preparation or chromatographic separation, can greatly impact method robustness and result accuracy. In this work, we report a case study of drug dimerization in HPLC analysis where proximate causes were attributed to either the LC columns or the HPLC instrument. Solution stress studies indicated that the same pseudo-dimeric degradants could also be formed rapidly when the compound was exposed to certain oxidative transition metal ions, such as Cu(II) and Fe(III). Two pseudo-dimeric degradants were isolated from transition metal stressed samples and their structures were elucidated. A degradation pathway was proposed, whereby the degradation was initiated through transition metal-induced single electron transfer oxidation. Further studies confirmed that the dimerization was induced by trace transition metals in the HPLC flow path, which could arise from either the stainless steel frits in the LC column or stainless steel tubing in the HPLC instrument. Various procedures to prevent transition metal-induced drug degradation were explored, and a general strategy to mitigate such risks is briefly discussed.

  15. Recognition- and Reactivity-Based Fluorescent Probes for Studying Transition Metal Signaling in Living Systems

    PubMed Central

    2015-01-01

    Conspectus Metals are essential for life, playing critical roles in all aspects of the central dogma of biology (e.g., the transcription and translation of nucleic acids and synthesis of proteins). Redox-inactive alkali, alkaline earth, and transition metals such as sodium, potassium, calcium, and zinc are widely recognized as dynamic signals, whereas redox-active transition metals such as copper and iron are traditionally thought of as sequestered by protein ligands, including as static enzyme cofactors, in part because of their potential to trigger oxidative stress and damage via Fenton chemistry. Metals in biology can be broadly categorized into two pools: static and labile. In the former, proteins and other macromolecules tightly bind metals; in the latter, metals are bound relatively weakly to cellular ligands, including proteins and low molecular weight ligands. Fluorescent probes can be useful tools for studying the roles of transition metals in their labile forms. Probes for imaging transition metal dynamics in living systems must meet several stringent criteria. In addition to exhibiting desirable photophysical properties and biocompatibility, they must be selective and show a fluorescence turn-on response to the metal of interest. To meet this challenge, we have pursued two general strategies for metal detection, termed “recognition” and “reactivity”. Our design of transition metal probes makes use of a recognition-based approach for copper and nickel and a reactivity-based approach for cobalt and iron. This Account summarizes progress in our laboratory on both the development and application of fluorescent probes to identify and study the signaling roles of transition metals in biology. In conjunction with complementary methods for direct metal detection and genetic and/or pharmacological manipulations, fluorescent probes for transition metals have helped reveal a number of principles underlying transition metal dynamics. In this Account, we give

  16. Recognition- and reactivity-based fluorescent probes for studying transition metal signaling in living systems.

    PubMed

    Aron, Allegra T; Ramos-Torres, Karla M; Cotruvo, Joseph A; Chang, Christopher J

    2015-08-18

    Metals are essential for life, playing critical roles in all aspects of the central dogma of biology (e.g., the transcription and translation of nucleic acids and synthesis of proteins). Redox-inactive alkali, alkaline earth, and transition metals such as sodium, potassium, calcium, and zinc are widely recognized as dynamic signals, whereas redox-active transition metals such as copper and iron are traditionally thought of as sequestered by protein ligands, including as static enzyme cofactors, in part because of their potential to trigger oxidative stress and damage via Fenton chemistry. Metals in biology can be broadly categorized into two pools: static and labile. In the former, proteins and other macromolecules tightly bind metals; in the latter, metals are bound relatively weakly to cellular ligands, including proteins and low molecular weight ligands. Fluorescent probes can be useful tools for studying the roles of transition metals in their labile forms. Probes for imaging transition metal dynamics in living systems must meet several stringent criteria. In addition to exhibiting desirable photophysical properties and biocompatibility, they must be selective and show a fluorescence turn-on response to the metal of interest. To meet this challenge, we have pursued two general strategies for metal detection, termed "recognition" and "reactivity". Our design of transition metal probes makes use of a recognition-based approach for copper and nickel and a reactivity-based approach for cobalt and iron. This Account summarizes progress in our laboratory on both the development and application of fluorescent probes to identify and study the signaling roles of transition metals in biology. In conjunction with complementary methods for direct metal detection and genetic and/or pharmacological manipulations, fluorescent probes for transition metals have helped reveal a number of principles underlying transition metal dynamics. In this Account, we give three recent

  17. Photoluminescence of monolayer transition metal dichalcogenides integrated with VO2

    NASA Astrophysics Data System (ADS)

    Lin, Yu-Chuan; DeLello, Kursti; Zhang, Hai-Tian; Zhang, Kehao; Lin, Zhong; Terrones, Mauricio; Engel-Herbert, Roman; Robinson, Joshua A.

    2016-12-01

    Integrating a phase transition material with two-dimensional semiconductors can provide a route towards tunable opto-electronic metamaterials. Here, we integrate monolayer transition metal dichalcogenides with vanadium dioxide (VO2) thin films grown via molecular beam epitaxy to form a 2D/3D heterostructure. Vanadium dioxide undergoes an insulator-to-metal transition at 60-70 °C, which changes the band alignment between MoS2 and VO2 from a semiconductor-insulator junction to a semiconductor-metal junction. By switching VO2 between insulating and metallic phases, the modulation of photoluminescence emission in the 2D semiconductors was observed. This study demonstrates the feasibility to combine TMDs and functional oxides to create unconventional hybrid optoelectronic properties derived from 2D semiconductors that are linked to functional properties of oxides through proximity coupling.

  18. Magnetism In 3d Transition Metals at High Pressures

    SciTech Connect

    Iota, V

    2006-02-09

    This research project examined the changes in electronic and magnetic properties of transition metals and oxides under applied pressures, focusing on complex relationship between magnetism and phase stability in these correlated electron systems. As part of this LDRD project, we developed new measurement techniques and adapted synchrotron-based electronic and magnetic measurements for use in the diamond anvil cell. We have performed state-of-the-art X-ray spectroscopy experiments at the dedicated high-pressure beamline HP-CAT (Sector 16 Advanced Photon Source, Argonne National Laboratory), maintained in collaboration with of University of Nevada, Las Vegas and Geophysical Laboratory of The Carnegie Institution of Washington. Using these advanced measurements, we determined the evolution of the magnetic order in the ferromagnetic 3d transition metals (Fe, Co and Ni) under pressure, and found that at high densities, 3d band broadening results in diminished long range magnetic coupling. Our experiments have allowed us to paint a unified picture of the effects of pressure on the evolution of magnetic spin in 3d electron systems. The technical and scientific advances made during this LDRD project have been reported at a number of scientific meetings and conferences, and have been submitted for publication in technical journals. Both the technical advances and the physical understanding of correlated systems derived from this LDRD are being applied to research on the 4f and 5f electron systems under pressure.

  19. XRD and FTIR studies the effect of heat treatment and doping the transition metal oxide on LiNbO3 and LiNb3O8 nano-crystallite phases in lithium borate glass system.

    PubMed

    Kashif, Ismail; Soliman, Ashia A; Sakr, Elham M; Ratep, Asmaa

    2013-09-01

    Glasses of various compositions in the system 90 Li2B4O7-10 Nb2O5 mixed with T.M ions (where T.M is the transition metal) were prepared by quenching technique. Heat-treatment of the parent glasses was performed at 540, 570 and 620 °C, for 5 and 16 h. The glass structure evolution during the controlled crystallization was examined by XRD and FT-IR spectroscopy analysis. The crystalline phases present in the glass ceramics were identified via X-ray diffraction as a function of heat treatment. The FT-IR data propose for these glasses and heat-treated glass network structures mainly built by: di-, tri-, tetra-, penta-and ortho-borate groups. It was found that the quantitative evolution of these various borate species in the glass structures is influenced by the transition metal. A detailed discussion relating to the N4 evolution with the T.M content was made.

  20. Reduction of transition metals by human (THP-1) monocytes is enhanced by activators of protein kinase C.

    PubMed

    Wood, J L; Graham, A

    1999-11-01

    Macrophages oxidize low density lipoprotein (LDL) by enzymatic and non-enzymatic mechanisms; however, it is evident that macrophage reduction of transition metals can accelerate LDL oxidation in vitro, and possibly in vivo. Distinct cellular pathways contribute to this process, including trans-plasma membrane electron transport (TPMET), and production of free thiols or superoxide. Here, we explore the role of protein kinase C (PKC) in regulating transition metal reduction by each of these redox-active pathways, in human (THP-1) monocytes. We demonstrate that PKC agonists and/or inhibitors modulate reduction of transition metals by monocytes: both thiol-independent (direct) and thiol-dependent (indirect) pathways for transition metal reduction are enhanced by PKC activation, suggesting a potential strategy for therapeutic intervention.

  1. Transitional Metal/Chalcogen Dependant Interactions of Hairpin DNA with Transition Metal Dichalcogenides, MX2.

    PubMed

    Loo, Adeline Huiling; Bonanni, Alessandra; Sofer, Zdenek; Pumera, Martin

    2015-08-03

    Owing to the attractive properties that transition metal dichalcogenides (TMDs) display, they have found recent application in the fabrication of biosensing devices. These devices involve the immobilization of a recognition element such as DNA onto the surface of TMDs. Therefore, it is imperative to examine the interactions between TMDs and DNA. Herein, we explore the effect of different transition metals (Mo and W) and chalcogens (S and Se) on the interactions between hairpin DNA and TMDs of both bulk and t-BuLi exfoliated forms. We discovered that the interactions are strongly dependent on the metal/chalcogen composition in TMDs.

  2. Spinning around in Transition-Metal Chemistry.

    PubMed

    Swart, Marcel; Gruden, Maja

    2016-12-20

    The great diversity and richness of transition metal chemistry, such as the features of an open d-shell, opened a way to numerous areas of scientific research and technological applications. Depending on the nature of the metal and its environment, there are often several energetically accessible spin states, and the progress in accurate theoretical treatment of this complicated phenomenon is presented in this Account. The spin state energetics of a transition metal complex can be predicted theoretically on the basis of density functional theory (DFT) or wave function based methodology, where DFT has advantages since it can be applied routinely to medium-to-large-sized molecules and spin-state consistent density functionals are now available. Additional factors such as the effect of the basis set, thermochemical contributions, solvation, relativity, and dispersion, have been investigated by many researchers, but challenges in unambiguous assignment of spin states still remain. The first DFT studies showed intrinsic spin-state preferences of hybrid functionals for high spin and early generalized gradient approximation functionals for low spin. Progress in the development of density functional approximations (DFAs) then led to a class of specially designed DFAs, such as OPBE, SSB-D, and S12g, and brought a very intriguing and fascinating observation that the spin states of transition metals and the SN2 barriers of organic molecules are somehow intimately linked. Among the many noteworthy results that emerged from the search for the appropriate description of the complicated spin state preferences in transition metals, we mainly focused on the examination of the connection between the spin state and the structures or coordination modes of the transition metal complexes. Changes in spin states normally lead only to changes in the metal-ligand bond lengths, but to the best of our knowledge, the dapsox ligand showed the first example of a transition-metal complex where a

  3. Dimensional diversity in transition metal trihalides

    SciTech Connect

    Jianhua Lin; Miller, G.J. )

    1993-04-14

    Structural variations of the second- and third-row transition metal trihalides are rationalized via tight-binding band calculations and evaluation of Madelung energetic factors. The observed structure for a given metal halide is controlled by both the coordination geometry at the anion and the d electron configuration at the metal. As the polarizability of the halide increases, the M-X-M angle, in general, decreases so that three-dimensional frameworks occur for the fluorides, while layer and chain structures are found for the chlorides, bromides, and iodides. Within a particular halide system, systematic structural trends also occur as the d electron configuration changes. 56 refs., 23 figs., 4 tabs.

  4. Laser materials based on transition metal ions

    NASA Astrophysics Data System (ADS)

    Moncorgé, Richard

    2017-01-01

    The purpose of this presentation is to review the spectroscopic properties of the main laser materials based on transition metal ions which lead to noticeable laser performance at room temperature and, for very few cases, because of unique properties, when they are operated at cryogenic temperatures. The description also includes the materials which are currently being used as saturable absorbers for passive-Q-switching of a variety of other near- and mid-infrared solid state lasers. A substantial part of the article is devoted first to the description of the energy levels and of the absorption and emission transitions of the transition metal ions in various types of environments by using the well-known Tanabe-Sugano diagrams. It is shown in particular how these diagrams can be used along with other theoretical considerations to understand and describe the spectroscopic properties of ions sitting in crystal field environments of near-octahedral or near-tetrahedral symmetry. The second part is then dedicated to the description (positions and intensities) of the main absorption and emission features which characterize the different types of materials.

  5. Heterobimetallic coordination polymers involving 3d metal complexes and heavier transition metals cyanometallates

    SciTech Connect

    Peresypkina, Eugenia V.; Samsonenko, Denis G.; Vostrikova, Kira E.

    2015-04-15

    The results of the first steps in the design of coordination polymers based on penta- and heptacyanometallates of heavier d transitions metals are presented. The 2D structure of the coordination polymers: [(Mn(acacen)){sub 2}Ru(NO)(CN){sub 5}]{sub n} and two complexes composed of different cyanorhenates, [Ni(cyclam)]{sub 2}[ReO(OH)(CN){sub 4}](ClO{sub 4}){sub 2}(H{sub 2}O){sub 1.25} and [Cu(cyclam)]{sub 2}[Re(CN){sub 7}](H{sub 2}O){sub 12}, was confirmed by single crystal XRD study, the rhenium oxidation state having been proved by the magnetic measurements. An amorphism of [M(cyclam)]{sub 3}[Re(CN){sub 7}]{sub 2} (M=Ni, Cu) polymers does not allow to define strictly their dimensionality and to model anisotropic magnetic behavior of the compounds. However, with high probability a honey-comb like layer structure could be expected for [M(cyclam)]{sub 3}[Re(CN){sub 7}]{sub 2} complexes, studied in this work, because such an arrangement is the most common among the bimetallic assemblies of hexa- and octacyanometallates with a ratio [M(cyclam)]/[M(CN){sub n}]=3/2. For the first time was prepared and fully characterized a precursor (n-Bu{sub 4}N){sub 2}[Ru(NO)(CN){sub 5}], soluble in organic media. - Graphical abstract: The very first results in the design of 2D coordination polymers based on penta- and heptacyanometallates of 4d and5d transitions metals are presented. - Highlights: • Design of coordination polymers based on penta- and heptacyanometallates. • New Ru and Re cyanide based heterobimetallic coordination complexes. • Hydrolysis and ox/red processes involving [Re(CN){sub 7}]{sup 3+} during crystallization. • High magnetic anisotropy of [M(cyclam)]{sub 3}[Re(CN){sub 7}]{sub 2}(H{sub 2}O){sub n}, M=Cu, Ni, complexes.

  6. Multifunctional Ligands in Transition Metal Catalysis

    SciTech Connect

    Crabtree, Robert H

    2011-01-01

    Sophisticated ligands are now being designed that do far more than just fulfil their traditional spectator roles by binding to the metal and providing a sterically-defined binding pocket for the substrate in homogeneous transition metal catalysis. This Focus review emphasizes selected cases in which ligands carry additional functional groups that change the properties of the ligand as a result of an external stimulus or undergo catalytically-relevant ligand-based reactivity. These include proton responsive ligands capable of gaining or losing one or more protons, ligands having a hydrogen bonding function, electroresponsive ligands capable of gaining or losing one or more electrons, and photoresponsive ligands capable of undergoing a useful change of properties upon irradiation. Molecular recognition ligands and proton coupled electron transfer (PCET) are briefly discussed.

  7. Raman spectroscopy of transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Saito, R.; Tatsumi, Y.; Huang, S.; Ling, X.; Dresselhaus, M. S.

    2016-09-01

    Raman spectroscopy of transition metal dichalcogenides (TMDs) is reviewed based on our recent theoretical and experimental works. First, we discuss the semi-classical and quantum mechanical description for the polarization dependence of Raman spectra of TMDs in which the optical dipole transition matrix elements as a function of laser excitation energy are important for understanding the polarization dependence of the Raman intensity and Raman tensor. Overviewing the symmetry of TMDs, we discuss the dependence of the Raman spectra of TMDs on layer thickness, polarization, laser energy and the structural phase. Furthermore, we discuss the Raman spectra of twisted bilayer and heterostructures of TMDs. Finally, we give our perspectives on the Raman spectroscopy of TMDs.

  8. Raman spectroscopy of transition metal dichalcogenides.

    PubMed

    Saito, R; Tatsumi, Y; Huang, S; Ling, X; Dresselhaus, M S

    2016-09-07

    Raman spectroscopy of transition metal dichalcogenides (TMDs) is reviewed based on our recent theoretical and experimental works. First, we discuss the semi-classical and quantum mechanical description for the polarization dependence of Raman spectra of TMDs in which the optical dipole transition matrix elements as a function of laser excitation energy are important for understanding the polarization dependence of the Raman intensity and Raman tensor. Overviewing the symmetry of TMDs, we discuss the dependence of the Raman spectra of TMDs on layer thickness, polarization, laser energy and the structural phase. Furthermore, we discuss the Raman spectra of twisted bilayer and heterostructures of TMDs. Finally, we give our perspectives on the Raman spectroscopy of TMDs.

  9. Spin doping using transition metal phthalocyanine molecules

    NASA Astrophysics Data System (ADS)

    Atxabal, A.; Ribeiro, M.; Parui, S.; Urreta, L.; Sagasta, E.; Sun, X.; Llopis, R.; Casanova, F.; Hueso, L. E.

    2016-12-01

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale.

  10. Spin doping using transition metal phthalocyanine molecules

    PubMed Central

    Atxabal, A.; Ribeiro, M.; Parui, S.; Urreta, L.; Sagasta, E.; Sun, X.; Llopis, R.; Casanova, F.; Hueso, L. E.

    2016-01-01

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale. PMID:27941810

  11. Radiation damage of transition metal carbides

    SciTech Connect

    Dixon, G.

    1991-01-01

    In this grant period we have investigated electrical properties of transition metal carbides and radiation-induced defects produced by low-temperature electron irradiation in them. Special attention has been given to the composition VC[sub 0.88] in which the vacancies on the carbon sublattice of this fcc crystal order to produce a V[sub 8]C[sub 7] superlattice. The existence of this superlattice structure was found to make the crystal somewhat resistant to radiation damage at low doses and/or at ambient temperature. At larger doses significant changes in the resistivity are produced. Annealing effects were observed which we believe to be connected with the reconstitution of the superlattice structure.

  12. Theoretical studies of transition metal dimers

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Bauschlicher, Charles W., Jr.

    1985-01-01

    The CASSCF approach was used to perform the MCSCF calculations for a number of transition metal dimers, including the Sc2, Ti2, Cr2, Cu2, TiV, Y2, Nb2, and Mo2 molecules; in addition, CASSCF/CI calculations were carried out for Sc2, Ti2, Cu2, and Y2. The CASSCF procedure is shown to provide a consistent set of calculations for these molecules, from which trends and a simple qualitative picture of the electronic structure may be derived. In particular, the calculations confirmed the ground states of the Sc2 and the TiV, and led to predictions for other molecules in this series. In addition to specific predictions, the study provides a simple qualitative picture of the bonding in these dimers.

  13. Transition metal-ligand bonding. II

    NASA Technical Reports Server (NTRS)

    Bauschlicher, C. W., Jr.

    1986-01-01

    The nature of the bonding of CO, H2O, and NH3 to transition metal atoms is analyzed using the constrained-space-orbital-variation (CSOV) technique. The cooperative effects for Ni(CO)2 are found to be different than those for Ni(H2O)2. The bonding between neutral systems and the positive ions is found to be quite different; NiCO(+) has little pi bonding, while NiCO has strong pi bonding. The positive ion of NiH2O is far more strongly bound than the neutral, while for NiCO the positive ion and neutral are bound by about the same energy.

  14. Spin doping using transition metal phthalocyanine molecules.

    PubMed

    Atxabal, A; Ribeiro, M; Parui, S; Urreta, L; Sagasta, E; Sun, X; Llopis, R; Casanova, F; Hueso, L E

    2016-12-12

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale.

  15. Transition metal catalysis and nucleophilic fluorination.

    PubMed

    Hollingworth, Charlotte; Gouverneur, Véronique

    2012-03-21

    Transition metal catalyzed transformations using fluorinating reagents have been developed extensively for the preparation of synthetically valuable fluorinated targets. This is a topic of critical importance to facilitate laboratory and industrial chemical synthesis of fluorine containing pharmaceuticals and agrochemicals. Translation to (18)F-radiochemistry is also emerging as a vibrant research field because functional imaging based on Positron Emission Tomography (PET) is increasingly used for both diagnosis and pharmaceutical development. This review summarizes how fluoride sources have been used for the catalytic nucleophilic fluorination of various substrates inclusive of aryl triflates, alkynes, allylic halides, allylic esters, allylic trichloroacetimidates, benzylic halides, tertiary alkyl halides and epoxides. Until recently, progress in this field of research has been slow in part because of the challenges associated with the dual reactivity profile of fluoride (nucleophile or base). Despite these difficulties, some remarkable breakthroughs have emerged. This includes the demonstration that Pd(0)/Pd(II)-catalyzed nucleophilic fluorination to access fluoroarenes from aryl triflates is feasible, and the first examples of Tsuji-Trost allylic alkylation with fluoride using either allyl chlorides or allyl precursors bearing O-leaving groups. More recently, allylic fluorides were also made accessible under iridium catalysis. Another reaction, which has been greatly improved based on careful mechanistic work, is the catalytic asymmetric hydrofluorination of meso epoxides. Notably, each individual transition metal catalyzed nucleophilic fluorination reported to date employs a different F-reagent, an observation indicating that this area of research will benefit from a larger pool of nucleophilic fluoride sources. In this context, a striking recent development is the successful design, synthesis and applications of a fluoride-derived electrophilic late stage

  16. Dysregulation of transition metal ion homeostasis is the molecular basis for cadmium toxicity in Streptococcus pneumoniae

    PubMed Central

    Begg, Stephanie L.; Eijkelkamp, Bart A.; Luo, Zhenyao; Couñago, Rafael M.; Morey, Jacqueline R.; Maher, Megan J.; Ong, Cheryl-lynn Y.; McEwan, Alastair G.; Kobe, Bostjan; O’Mara, Megan L.; Paton, James C.; McDevitt, Christopher A.

    2015-01-01

    Cadmium is a transition metal ion that is highly toxic in biological systems. Although relatively rare in the Earth’s crust, anthropogenic release of cadmium since industrialization has increased biogeochemical cycling and the abundance of the ion in the biosphere. Despite this, the molecular basis of its toxicity remains unclear. Here we combine metal-accumulation assays, high-resolution structural data and biochemical analyses to show that cadmium toxicity, in Streptococcus pneumoniae, occurs via perturbation of first row transition metal ion homeostasis. We show that cadmium uptake reduces the millimolar cellular accumulation of manganese and zinc, and thereby increases sensitivity to oxidative stress. Despite this, high cellular concentrations of cadmium (~17 mM) are tolerated, with negligible impact on growth or sensitivity to oxidative stress, when manganese and glutathione are abundant. Collectively, this work provides insight into the molecular basis of cadmium toxicity in prokaryotes, and the connection between cadmium accumulation and oxidative stress. PMID:25731976

  17. Trends in Ionization Energy of Transition-Metal Elements

    ERIC Educational Resources Information Center

    Matsumoto, Paul S.

    2005-01-01

    A rationale for the difference in the periodic trends in the ionization energy of the transition-metal elements versus the main-group elements is presented. The difference is that in the transition-metal elements, the electrons enter an inner-shell electron orbital, while in the main-group elements, the electrons enter an outer-shell electron…

  18. Neutron scattering study of magnetic excitations in a 5d-based double-perovskite Ba2FeReO6

    SciTech Connect

    Plumb, K. W.; Cook, A. M.; Clancy, J.P.; Kolesnikov, Alexander I; Jeon, B. C.; Noh, Tae Won; Paramekanti, A.; Kim, Young-June

    2013-01-01

    Motivated by exploring spin-orbit-coupled magnetism in 5d-based transition metal oxides (TMOs) beyond the iridates, we present a powder inelastic neutron scattering study of magnetic excitations in Ba2FeReO6 - a member of the double-perovskite family of materials which exhibit half-metallic behavior and high Curie temperatures Tc. We find clear evidence of two well-defined dispersing magnetic modes in its low-temperature ferromagnetic state. We develop a local moment model, which incorporates the interaction of Fe spins with spin-orbital locked magnetic moments on Re and show that it captures our experimental observations. This allows us to extract moment sizes and exchange couplings, explain the magnitude of Tc, and infer that magnetostructural locking terms are weak. Our study further opens up Re-based compounds as model systems to explore the interplay of strong correlations and spin-orbit coupling in 5d TMOs.

  19. Bulk Properties of Transition Metals: A Challenge for the Design of Universal Density Functionals.

    PubMed

    Janthon, Patanachai; Luo, Sijie Andy; Kozlov, Sergey M; Viñes, Francesc; Limtrakul, Jumras; Truhlar, Donald G; Illas, Francesc

    2014-09-09

    Systematic evaluation of the accuracy of exchange-correlation functionals is essential to guide scientists in their choice of an optimal method for a given problem when using density functional theory. In this work, accuracy of one Generalized Gradient Approximation (GGA) functional, three meta-GGA functionals, one Nonseparable Gradient Approximation (NGA) functional, one meta-NGA, and three hybrid GGA functionals was evaluated for calculations of the closest interatomic distances, cohesive energies, and bulk moduli of all 3d, 4d, and 5d bulk transition metals that have face centered cubic (fcc), hexagonal closed packed (hcp), or body centered cubic (bcc) structures (a total of 27 cases). Our results show that including the extra elements of kinetic energy density and Hartree-Fock exchange energy density into gradient approximation density functionals does not usually improve them. Nevertheless, the accuracies of the Tao-Perdew-Staroverov-Scuseria (TPSS) and M06-L meta-GGAs and the MN12-L meta-NGA approach the accuracy of the Perdew-Burke-Ernzerhof (PBE) GGA, so usage of these functionals may be advisable for systems containing both solid-state transition metals and molecular species. The N12 NGA functional is also shown to be almost as accurate as PBE for bulk transition metals, and thus it could be a good choice for studies of catalysis given its proven good performance for molecular species.

  20. Energetic characteristics of transition metal complexes.

    PubMed

    Wojewódka, Andrzej; Bełzowski, Janusz; Wilk, Zenon; Staś, Justyna

    2009-11-15

    Ten transition metal nitrate and perchlorate complexes of hydrazine and ethylenediamine were synthesized, namely [Cu(EN)(2)](ClO(4))(2), [Co(EN)(3)](ClO(4))(3), [Ni(EN)(3)](ClO(4))(2), [Hg(EN)(2)](ClO(4))(2), [Cr(N(2)H(4))(3)](ClO(4))(3), [Cd(N(2)H(4))(3)](ClO(4))(2), [Ni(N(2)H(4))(3)](NO(3))(2), [Co(N(2)H(4))(3)](NO(3))(3), [Zn(N(2)H(4))(3)](NO(3))(2), and [Cd(N(2)H(4))(3)](NO(3))(2) based on the lines of the literature reported methods. All of them were tested with applying underwater detonation test and further compared to the typical blasting explosives: RDX, HMX, TNT and PETN. From the above presented complexes [Ni(N(2)H(4))(3)](NO(3))(2) (called NHN) and [Co(N(2)H(4))(3)](NO(3))(3) (called CoHN) are known as primary explosives and can be used as the standard explosives. Explosion parameters, such as shock wave overpressure, shock wave energy equivalent and bubble energy equivalent, were determined. Evaluated energetic characteristics of the tested compounds are comparable to those of the classic high explosives and are even enhanced in some cases.

  1. Transition Metal Phosphide Hydroprocessing Catalysts: A review

    SciTech Connect

    Oyama, S.; Gott, T; Zhao, H; Lee, Y

    2009-01-01

    The diminishing quality of oil feedstocks coupled with increasingly more stringent environmental regulations limiting the content of sulfur in transportation fuels have given rise to a need for improved hydroprocessing technology. This review begins with a summary of the major improvements in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) catalysts and processes that have been reported in recent years. It then describes a new class of hydroprocessing catalysts, the transition metal phosphides, which have emerged as a promising group of high-activity, stable catalysts. The phosphides have physical properties resembling ceramics, so are strong and hard, yet retain electronic and magnetic properties similar to metals. Their crystal structures are based on trigonal prisms, yet they do not form layered structures like the sulfides. They display excellent performance in HDS and HDN, with the most active phosphide, Ni{sub 2}P, having activity surpassing that of promoted sulfides on the basis of sites titrated by chemisorption (CO for the phosphides, O{sub 2} for the sulfides). In the HDS of difficult heteroaromatics like 4,6-dimethyldibenzothiophene Ni{sub 2}P operates by the hydrogenation pathway, while in the HDN of substituted nitrogen compounds like 2-methylpiperidine it carries out nucleophilic substitution. The active sites for hydrogenation in Ni{sub 2}P have a square pyramidal geometry, while those for direct hydrodesulfurization have a tetrahedral geometry. Overall, Ni{sub 2}P is a promising catalyst for deep HDS in the presence of nitrogen and aromatic compounds.

  2. Tunable magnetocaloric effect in transition metal alloys.

    PubMed

    Belyea, Dustin D; Lucas, M S; Michel, E; Horwath, J; Miller, Casey W

    2015-10-28

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based "high entropy alloys" in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants.

  3. Tunable magnetocaloric effect in transition metal alloys

    NASA Astrophysics Data System (ADS)

    Belyea, Dustin D.; Lucas, M. S.; Michel, E.; Horwath, J.; Miller, Casey W.

    2015-10-01

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based “high entropy alloys” in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants.

  4. New Gallides and Germanides of Transition Metals

    NASA Astrophysics Data System (ADS)

    Popova, S. V.

    1982-01-01

    The analysis of the average atomic volumes (AAV) of the intermediate phases from the concentration was done in many two-component systems. It was shown that in some systems (namely transition metal with non-transition element from the IIIrd or IVth group of the periodic table) the AAV of the intermediate phases are much more less than the sum of the volumes of the pure components. It means that the formation of the intermediate phases in such systems is accompanied by a rather large decreasing of the volume in comparison with the mixture of elements. For this reason the high pressure conditions are favourable for the formation of the intermediate phases in such systems from the thermodynamical point of view. On the ground of these data the systems W-Ga, W-Ge, Re-Ga, Os-Ga, Sc-Ga, Ta-Ga, were investigated at high pressures and temperatures. It was found that many new phases are crystallised in these systems. All of them are metastable at room pressure. The composition and crystal structures of these phases were investigated at ordinary conditions.

  5. Polytypism in superhard transition-metal triborides

    PubMed Central

    Liang, Yongcheng; Yang, Jiong; Yuan, Xun; Qiu, Wujie; Zhong, Zheng; Yang, Jihui; Zhang, Wenqing

    2014-01-01

    The quest of novel compounds with special structures and unusual functionalities continues to be a central challenge to modern materials science. Even though their exact structures have puzzled scientists for decades, superhard transition-metal borides (TMBs) have long been believed to exist only in simple crystal structures. Here, we report on a polytypic phenomenon in superhard WB3 and MoB3 with a series of energetically degenerate structures due to the random stacking of metal layers amongst the interlocking boron layers. Such polytypism can create a multiphase solid-solution compound with a large number of interfaces amongst different polytypes, and these interfaces will strongly hinder the interlayer sliding movement within each polytype, thereby further increase the hardness of this particular material. Furthermore, in contrast to the conventional knowledge that intrinsically strong chemical bonds in superhard materials should lead to high lattice thermal conductivity, the polytypic TMB3 manifest anomalously low lattice thermal conductivity due to structural disorders and phonon folding. These findings promise to open a new avenue to searching for novel superhard materials with additional functionalities. PMID:24863493

  6. Polytypism in superhard transition-metal triborides.

    PubMed

    Liang, Yongcheng; Yang, Jiong; Yuan, Xun; Qiu, Wujie; Zhong, Zheng; Yang, Jihui; Zhang, Wenqing

    2014-05-27

    The quest of novel compounds with special structures and unusual functionalities continues to be a central challenge to modern materials science. Even though their exact structures have puzzled scientists for decades, superhard transition-metal borides (TMBs) have long been believed to exist only in simple crystal structures. Here, we report on a polytypic phenomenon in superhard WB3 and MoB3 with a series of energetically degenerate structures due to the random stacking of metal layers amongst the interlocking boron layers. Such polytypism can create a multiphase solid-solution compound with a large number of interfaces amongst different polytypes, and these interfaces will strongly hinder the interlayer sliding movement within each polytype, thereby further increase the hardness of this particular material. Furthermore, in contrast to the conventional knowledge that intrinsically strong chemical bonds in superhard materials should lead to high lattice thermal conductivity, the polytypic TMB3 manifest anomalously low lattice thermal conductivity due to structural disorders and phonon folding. These findings promise to open a new avenue to searching for novel superhard materials with additional functionalities.

  7. Tunable magnetocaloric effect in transition metal alloys

    PubMed Central

    Belyea, Dustin D.; Lucas, M. S.; Michel, E.; Horwath, J.; Miller, Casey W.

    2015-01-01

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based “high entropy alloys” in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants. PMID:26507636

  8. Transition metal-free olefin polymerization catalyst

    DOEpatents

    Sen, Ayusman; Wojcinski, II, Louis M.; Liu, Shengsheng

    2001-01-01

    Ethylene and/or propylene are polymerized to form high molecular weight, linear polymers by contacting ethylene and/or propylene monomer, in the presence of an inert reaction medium, with a catalyst system which consists essentially of (1) an aluminum alkyl component, such as trimethylaluminum, triethylaluminum, triisobutylaluminum, tri-n-octylaluminum and diethylaluminum hydride and (2) a Lewis acid or Lewis acid derivative component, such as B (C.sub.6 F.sub.5).sub.3, [(CH.sub.3).sub.2 N (H) (C.sub.6 H.sub.5)].sup.+ [B (C.sub.6 F.sub.5)4].sup.-, [(C.sub.2 H.sub.5).sub.3 NH].sup.+ [B C.sub.6 F.sub.5).sub.4 ],.sup.-, [C(C.sub.6 F.sub.5).sub.3 ].sup.+ [B(C.sub.6 F.sub.5).sub.4 ].sup.-, (C.sub.2 H.sub.5).sub.2 Al(OCH.sub.3), (C.sub.2 H.sub.5).sub.2 Al(2,6-di-t-butyl-4-methylphenoxide), (C.sub.2 H.sub.5)Al(2,6 -di-t-butylphenoxide).sub.2, (C.sub.2 H.sub.5).sub.2 Al(2,6-di-t-butylphonoxide) , 2,6 -di-t-butylphenol.multidot.methylaluminoxane or an alkylaluminoxane, and which may be completely free any transition metal component(s).

  9. Properties of Transition Metal Doped Alumina

    NASA Astrophysics Data System (ADS)

    Nykwest, Erik; Limmer, Krista; Brennan, Ray; Blair, Victoria; Ramprasad, Rampi

    Crystallographic texture can have profound effects on the properties of a material. One method of texturing is through the application of an external magnetic field during processing. While this method works with highly magnetic systems, doping is required to couple non-magnetic systems with the external field. Experiments have shown that low concentrations of rare earth (RE) dopants in alumina powders have enabled this kind of texturing. The magnetic properties of RE elements are directly related to their f orbital, which can have as many as 7 unpaired electrons. Since d-block elements can have as many as 5 unpaired electrons the effects of substitutional doping of 3d transition metals (TM) for Al in alpha (stable) and theta (metastable) alumina on the local structure and magnetic properties, in addition to the energetic cost, have been calculated by performing first-principles calculations based on density functional theory. This study has led to the development of general guidelines for the magnetic moment distribution at and around the dopant atom, and the dependence of this distribution on the dopant atom type and its coordination environment. It is anticipated that these findings can aid in the selection of suitable dopants help to guide parallel experimental efforts. This project was supported in part by an internship at the Army Research Laboratory, administered by the Oak Ridge Institute for Science and Education, along with a grant of computer time from the DoD High Performance Computing Modernization Program.

  10. Supported transition metal nanomaterials: Nanocomposites synthesized by ionizing radiation

    NASA Astrophysics Data System (ADS)

    Clifford, D. M.; Castano, C. E.; Rojas, J. V.

    2017-03-01

    Nanostructures decorated with transition metal nanoparticles using ionizing radiation as a synthesis method in aqueous solutions represents a clean alternative to existing physical, chemical and physicochemical methods. Gamma irradiation of aqueous solutions generates free radicals, both oxidizing and reducing species, all distributed homogeneously. The presence of oxidant scavengers in situ during irradiation generates a highly reductive environment favoring the reduction of the metal precursors promoting seed formation and nanoparticle growth. Particle growth is controlled by addition of surfactants, polymers or various substrates, otherwise referred to as supports, which enhance the formation of well dispersed nanoparticles. Furthermore, the combination of nanoparticles with supports can offer desirable synergisms not solely presented by the substrate or nanoparticles. Thus, supported nanoparticles offer a huge diversity of applications. Among the ionizing radiation methods to synthesize nanomaterials and modify their characteristics, gamma irradiation is of growing interest and it has shown tremendous potential in morphological control and distribution of particle size by judiciously varying parameters including absorbed dose, dose rate, concentration of metal precursor, and stabilizing agents. In this work, major advances on the synthesis of supported nanoparticles through gamma irradiation are reviewed as well as the opportunities to develop and exploit new composites using gamma-rays and other accessible ionizing radiation sources such as X-rays.

  11. Substitutional 4d and 5d impurities in graphene.

    PubMed

    Alonso-Lanza, Tomás; Ayuela, Andrés; Aguilera-Granja, Faustino

    2016-08-21

    We describe the structural and electronic properties of graphene doped with substitutional impurities of 4d and 5d transition metals. The adsorption energies and distances for 4d and 5d metals in graphene show similar trends for the later groups in the periodic table, which are also well-known characteristics of 3d elements. However, along earlier groups the 4d impurities in graphene show very similar adsorption energies, distances and magnetic moments to the 5d ones, which can be related to the influence of the 4d and 5d lanthanide contraction. Surprisingly, within the manganese group, the total magnetic moment of 3 μB for manganese is reduced to 1 μB for technetium and rhenium. We find that compared with 3d elements, the larger size of the 4d and 5d elements causes a high degree of hybridization with the neighbouring carbon atoms, reducing spin splitting in the d levels. It seems that the magnetic adjustment of graphene could be significantly different if 4d or 5d impurities are used instead of 3d impurities.

  12. Transition-Metal-Free C-3 Arylation of Quinoline-4-ones with Arylhydrazines.

    PubMed

    Ravi, Makthala; Chauhan, Parul; Kant, Ruchir; Shukla, Sanjeev K; Yadav, Prem P

    2015-05-15

    A transition-metal-free C-3-arylation of quinolin-4-ones in the presence of base has been achieved by using arylhydrazines as aryl radical source and air as oxidant. The reaction proceeds smoothly at room temperature and does not require any prefunctionalization and N-protection of quinoline-4-ones. The utility of this methodology is further demonstrated in synthesis of quinoline-quinolone hybrid as well as 6-aryl-benzofuro[3,2-c]quinoline scaffold.

  13. Transition metal-free aroylation of NH-sulfoximines with methyl arenes.

    PubMed

    Zou, Ya; Xiao, Jing; Peng, Zhihong; Dong, Wanrong; An, Delie

    2015-10-14

    A novel protocol towards N-aroylated sulfoximines from NH-sulfoximines and methyl arenes was herein demonstrated. The reaction took place in the presence of elemental iodine, requiring no external organic solvents, transition metal-catalysts or ligands. The aroylated products were obtained from the oxidative transformation in moderate to excellent yields (up to 94% yield) with a broad substrate scope (35 examples) through a radical pathway.

  14. Transition-Metal Substitution Doping in Synthetic Atomically Thin Semiconductors

    SciTech Connect

    Gao, Jian; Kim, Young Duck; Liang, Liangbo; Idrobo, Juan Carlos; Chow, Phil; Tan, Jiawei; Li, Baichang; Li, Lu; Sumpter, Bobby G.; Lu, Toh-Ming; Meunier, Vincent; Hone, James; Koratkar, Nikhil

    2016-09-20

    Semiconductor impurity doping has enabled an entire generation of technology. The emergence of alternative semiconductor material systems, such as transition metal dichalcogenides (TMDCs), requires the development of scalable doping strategies. We report an unprecedented one-pot synthesis for transition-metal substitution in large-area, synthetic monolayer TMDCs. Electron microscopy, optical and electronic transport characterization and ab initio calculations indicate that our doping strategy preserves the attractive qualities of TMDC monolayers, including semiconducting transport and strong direct-gap luminescence. These results are expected to encourage exploration of transition-metal substitution in two-dimensional systems, potentially enabling next-generation optoelectronic technology in the atomically-thin regime.

  15. High-throughput exploration of thermoelectric and mechanical properties of amorphous NbO2 with transition metal additions

    NASA Astrophysics Data System (ADS)

    Music, Denis; Geyer, Richard W.; Hans, Marcus

    2016-07-01

    To increase the thermoelectric efficiency and reduce the thermal fatigue upon cyclic heat loading, alloying of amorphous NbO2 with all 3d and 5d transition metals has systematically been investigated using density functional theory. It was found that Ta fulfills the key design criteria, namely, enhancement of the Seebeck coefficient and positive Cauchy pressure (ductility gauge). These quantum mechanical predictions were validated by assessing the thermoelectric and elastic properties on combinatorial thin films, which is a high-throughput approach. The maximum power factor is 2813 μW m-1 K-2 for the Ta/Nb ratio of 0.25, which is a hundredfold increment compared to pure NbO2 and exceeds many oxide thermoelectrics. Based on the elasticity measurements, the consistency between theory and experiment for the Cauchy pressure was attained within 2%. On the basis of the electronic structure analysis, these configurations can be perceived as metallic, which is consistent with low electrical resistivity and ductile behavior. Furthermore, a pronounced quantum confinement effect occurs, which is identified as the physical origin for the Seebeck coefficient enhancement.

  16. Process for making transition metal nitride whiskers

    DOEpatents

    Bamberger, C.E.

    1988-04-12

    A process for making metal nitrides, particularly titanium nitride whiskers, using a cyanide salt as a reducing agent for a metal compound in the presence of an alkali metal oxide. Sodium cyanide, various titanates and titanium oxide mixed with sodium oxide react to provide titanium nitride whiskers that can be used as reinforcement to ceramic composites. 1 fig., 1 tab.

  17. Process for making transition metal nitride whiskers

    DOEpatents

    Bamberger, Carlos E.

    1989-01-01

    A process for making metal nitrides, particularly titanium nitride whiskers, using a cyanide salt as a reducing agent for a metal compound in the presence of an alkali metal oxide. Sodium cyanide, various titanates and titanium oxide mixed with sodium oxide react to provide titanium nitride whiskers that can be used as reinforcement to ceramic composites.

  18. Mechanisms of transition-metal gettering in silicon

    SciTech Connect

    MYERS JR.,SAMUEL M.; SEIBT,M.; SCHROTER,W.

    2000-03-23

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed from a mechanistic perspective. Methods for mathematical modeling of gettering are reviewed and illustrated. Needs for further research are discussed.

  19. Atomic Natural Orbital Basis Sets for Transition Metals

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Taylor, Peter R.

    1993-01-01

    We show that atomic natural orbitals are an excellent way to contract transition-metal basis sets, even though the different low-lying electronic states may have very different basis set requirements.

  20. Transition-Metal-Free Biomolecule-Based Flexible Asymmetric Supercapacitors.

    PubMed

    Yang, Yun; Wang, Hua; Hao, Rui; Guo, Lin

    2016-09-01

    A transition-metal-free asymmetric supercapacitor (ASC) is successfully fabricated based on an earth-abundant biomass derived redox-active biomolecule, named lawsone. Such an ASC exhibits comparable or even higher energy densities than most of the recently reported transition-metal-based ASCs, and this green ASC generation from renewable resources is promising for addressing current issues of electronic hazard processing, high cost, and unsustainability.

  1. Investigation of methods for the selective removal and characterization of transition metals associated with solids in the marine environment

    SciTech Connect

    Van Valin, R.; Morse, J.W.

    1981-02-01

    The operation of an OTEC plant will result in the mixing of large volumes of seawater from different depths within the ocean. Because suspended particulate material is intimately involved in marine food webs and transition metals, such as copper, can have toxic effects, it is important to develop a sound methodology for characterizing and quantifying transition metal behavior associated with the solid material. The characterization of solid-phase-associated transition metals in the marine environment has largely been directed at marine sediments. These studies have generally indicated that it is not possible to uniquely identify the solid phases or chemical speciation of a given metal. There are many reasons for this difficulty, but the probable major analytical problems arise from the fact that many of the transition metals of interest are present only in trace concentrations as adsorbed species on amorphous oxides or as coprecipitates. In one approach transition metals are classified according to how easily they are solubilized when exposed to different types of chemical attack, as defined in chemical extraction schemes. In this study, several of the most widely accepted extraction techniques were compared for many of the most commonly measured transition metals to a variety of marine sediments. Based on the results of this study, the sequential extraction scheme of Tessler et al. (1979) is the recommended method for the characterization of solid-phase associated transition metals. An increase of the reducing agent concentration in the intermediate step and temperature decrease with an additional HCl digestion in the residual step are recommended as improvements, based on the results of the individual extraction method studies.

  2. Interactions between lasers and two-dimensional transition metal dichalcogenides.

    PubMed

    Lu, Junpeng; Liu, Hongwei; Tok, Eng Soon; Sow, Chorng-Haur

    2016-05-03

    The recent increasing research interest in two-dimensional (2D) layered materials has led to an explosion of in the discovery of novel physical and chemical phenomena in these materials. Among the 2D family, group-VI transition metal dichalcogenides (TMDs), such as represented by MoS2 and WSe2, are remarkable semiconductors with sizable energy band gaps, which make the TMDs promising building blocks for new generation optoelectronics. On the other hand, the specificity and tunability of the band gaps can generate particularly strong light-matter interactions between TMD crystals and specific photons, which can trigger complex and interesting phenomena such as photo-scattering, photo-excitation, photo-destruction, photo-physical modification, photochemical reaction and photo-oxidation. Herein, we provide an overview of the phenomena explained by various interactions between lasers and the 2D TMDs. Characterizations of the optical fundamentals of the TMDs via laser spectroscopies are reviewed. Subsequently, photoelectric conversion devices enabled by laser excitation and the functionality extension and performance improvement of the TMDs materials via laser modification are comprehensively summarized. Finally, we conclude the review by discussing the prospects for further development in this research area.

  3. Magnesium nanoparticles with transition metal decoration for hydrogen storage

    NASA Astrophysics Data System (ADS)

    Pasquini, Luca; Callini, Elsa; Brighi, Matteo; Boscherini, Federico; Montone, Amelia; Jensen, Torben R.; Maurizio, Chiara; Vittori Antisari, Marco; Bonetti, Ennio

    2011-11-01

    We report on the hydrogen storage behaviour of Mg nanoparticles (NPs) (size range 100 nm-1 μm) with metal-oxide core-shell morphology synthesized by inert gas condensation and decorated by transition metal (TM) (Pd or Ti) clusters via in situ vacuum deposition. The structure and morphology of the as-prepared and hydrogenated NPs is studied by electron microscopy, X-ray diffraction including in situ experiments and X-ray absorption spectroscopy, in order to investigate the relationships with the hydrogen storage kinetics measured by the volumetric Sieverts method. With both Pd and Ti, the decoration deeply improves the hydrogen sorption properties: previously inert NPs exhibit complete hydrogenation with fast transformation kinetics, good stability and reversible gravimetric capacity that can attain 6 wt%. In the case of Pd-decoration, the occurrence of Mg-Pd alloying is observed at high temperatures and in dependence of the hydrogen pressure conditions. These structural transformations modify both the kinetics and thermodynamics of hydride formation, while Ti-decoration has an effect only on the kinetics. The experimental results are discussed in relation with key issues such as the amount of decoration, the heat of mixing between TM and Mg and the binding energy between TM and hydrogen.

  4. Ultrafast photophysics of transition metal complexes.

    PubMed

    Chergui, Majed

    2015-03-17

    The properties of transition metal complexes are interesting not only for their potential applications in solar energy conversion, OLEDs, molecular electronics, biology, photochemistry, etc. but also for their fascinating photophysical properties that call for a rethinking of fundamental concepts. With the advent of ultrafast spectroscopy over 25 years ago and, more particularly, with improvements in the past 10-15 years, a new area of study was opened that has led to insightful observations of the intramolecular relaxation processes such as internal conversion (IC), intersystem crossing (ISC), and intramolecular vibrational redistribution (IVR). Indeed, ultrafast optical spectroscopic tools, such as fluorescence up-conversion, show that in many cases, intramolecular relaxation processes can be extremely fast and even shorter than time scales of vibrations. In addition, more and more examples are appearing showing that ultrafast ISC rates do not scale with the magnitude of the metal spin-orbit coupling constant, that is, that there is no heavy-atom effect on ultrafast time scales. It appears that the structural dynamics of the system and the density of states play a crucial role therein. While optical spectroscopy delivers an insightful picture of electronic relaxation processes involving valence orbitals, the photophysics of metal complexes involves excitations that may be centered on the metal (called metal-centered or MC) or the ligand (called ligand-centered or LC) or involve a transition from one to the other or vice versa (called MLCT or LMCT). These excitations call for an element-specific probe of the photophysics, which is achieved by X-ray absorption spectroscopy. In this case, transitions from core orbitals to valence orbitals or higher allow probing the electronic structure changes induced by the optical excitation of the valence orbitals, while also delivering information about the geometrical rearrangement of the neighbor atoms around the atom of

  5. Pristine and intercalated transition metal dichalcogenide superconductors

    NASA Astrophysics Data System (ADS)

    Klemm, Richard A.

    2015-07-01

    Transition metal dichalcogenides (TMDs) are quasi-two-dimensional layered compounds that exhibit strongly competing effects of charge-density wave (CDW) formation and superconductivity (SC). The weak van der Waals interlayer bonding between hexagonal layers of octahedral or trigonal prismatic TMD building blocks allows many polytypes to form. In the single layer 1 T polytype materials, one or more CDW states can form, but the pristine TMDs are not superconducting. The 2 H polytypes have two or more Fermi surfaces and saddle bands, allowing for dual orderings, which can be coexisting CDW and SC orderings, two SC gaps as in MgB2, two CDW gaps, and possibly even pseudogaps above the onset TCDW s of CDW orderings. Higher order polytypes allow for multiple CDW gaps and at least one superconducting gap. The CDW transitions TCDW s usually greatly exceed the superconducting transitions at their low Tc values, their orbital order parameters (OPs) are generally highly anisotropic and can even contain nodes, and the SC OPs can be greatly affected by their simultaneous presence. The properties of the CDWs ubiquitously seen in TMDs are remarkably similar to those of the pseudogaps seen in the high-Tc cuprates. In 2H-NbSe2, for example, the CDW renders its general s-wave SC OP orbital symmetry to be highly anisotropic and strongly reduces its Josephson coupling strength (IcRn) with the conventional SC, Pb. Hence, the pristine TMDs are highly "unconventional" in comparison with Pb, but are much more "conventional" than are the ferromagnetic superconductors such as URhGe. Applied pressure and intercalation generally suppress the TMD CDWs, allowing for enhanced SC formation, even in the 1 T polytype materials. The misfit intercalation compound (LaSe)1.14(NbSe2) and many 2 H -TMDs intercalated with organic Lewis base molecules, such as TaS2(pyridine)1/2, have completely incoherent c-axis transport, dimensional-crossover effects, and behave as stacks of intrinsic Josephson junctions

  6. Electron Devices Based on Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Tosun, Mahmut

    Integrated circuits consists of building blocks called transistors. A transistor is a switch that enables logic operations to perform computing. Since the invention of the first integrated circuit, transistors have been scaled down in their dimensions to increase the density of transistors per unit area to enable more functionality. Transistor scaling is continued by introducing novel device structures and materials at each technology node. Due to the challenges such as short channel effects and the power consumption issues, novel materials are investigated as a candidate for next generation transistors. In this thesis, 2-dimensinal layered semiconductors, namely transition metal dichalcogenides (TMDCs) are studied to assess their electronic material properties as a candidate channel material for next generation electronic devices. Chapter one, introduces the challenges in the state of the art MOSFET devices. Then the motivation for the use of TMDCs in MOSFETs is explained. In chapter two, doping of the TMDCs is studied to be able to probe the intrinsic electronic properties of the devices fabricated using these materials. Contact resistance can be decreased by doping and TMDC MOSFETs with near-ideal performance metrics are demonstrated. In chapter three the CMOS integration of the devices using TMDCs are examined. Logic operations are conducted by fabricating WSe 2 n-FETs and p-FETs on the same flake. Then vertical 3-dimensional integration of n-FETs and p-FETs are demonstrated using the same gate. These transistors are connected as a CMOS inverter and logic operations are performed. Chapter four presents the band structure engineering study using TMDCs. Mono-multilayer MoS2 junctions are found to have a type-I heterojunction. Optoelectronic properties of this junction are investigated and the junction is shown to have a photoresponse that dominates the photoresponse coming from the contacts. In chapter five, the tunneling devices using TMDCs are studied. Dual

  7. Contrasting Behavior of the Z Bonds in X-Z···Y Weak Interactions: Z = Main Group Elements Versus the Transition Metals.

    PubMed

    Joy, Jyothish; Jemmis, Eluvathingal D

    2017-02-06

    In contrast to the increasing family of weak intermolecular interactions in main-group compounds (X-Z···Y, Z = main-group elements), an analysis of the Cambridge Structural Database indicates that electron-saturated (18-electron) transition-metal complexes show reluctance toward weak M bond formation (X-M···Y, M = transition metal). In particular, weak M bonds involving electron-saturated (18-electron) complexes of transition metals with partially filled d-orbitals are not found. We propose that the nature of valence electron density distribution in transition-metal complexes is the primary reason for this reluctance. A survey of the interaction of selected electron-saturated transition-metal complexes with electron-rich molecules (Y) demonstrates the following: shielding the possible σ-hole on the metal center by the core electron density in 3d series, and enhanced electronegativity and relativistic effects in 4d and 5d series, hinders the formation of the M bond. A balance in all the destabilizing effects has been found in the 4d series due to its moderate polarizability and primogenic repulsion from inner core d-electrons. A changeover in the donor-acceptor nature of the metal center toward different types of incoming molecules is also unveiled here. The present study confirms the possibility of M bond as a new supramolecular force in designing the crystal structures of electron-saturated transition-metal complexes by invoking extreme ligand conditions.

  8. Orbital-selective singlet dimer formation and suppression of double exchange in 4d and 5d systems

    NASA Astrophysics Data System (ADS)

    Streltsov, Sergey; Cao, Gang; Khomskii, Daniel

    One of the main mechanisms of ferromagnetic ordering in conducting materials is the double exchange (DE). It is usually supposed in DE model that the Hund's coupling JH is much larger than electron hopping t; in this case one stabilizes the state with maximum spin per pair of ions, which finally leads to ferromagnetism in bulk systems. We show that in the dimerized 4 d / 5 d transition metal oxides for which JH is reduced and t is in contrast enhanced, another situation is possible, when formation of the spin-singlets on delocalized orbitals is more favorable. This leads to suppression of the DE and to a strong decrease of the total spin. The model calculations using the dynamical mean-field theory show that this effect survives even in the extended systems, not only for dimers. Such a situation is realized, e.g., in Y5Mo2O12, CrO2 under pressure and in many other 4 d / 5 d based materials. Another mechanism, which may suppress DE and which is also typical for 4 d / 5 d compounds is the spin-orbit coupling (SOC). We show on the example of Ba5AlIr2O11, that in this system it is the combination of molecular-orbital formation and SOC that strongly decreases magnetic moment on Ir. Civil Research and Development Foundation via FSCX-14-61025-0.

  9. Methods for synthesizing metal oxide nanowires

    DOEpatents

    Sunkara, Mahendra Kumar; Kumar, Vivekanand; Kim, Jeong H.; Clark, Ezra Lee

    2016-08-09

    A method of synthesizing a metal oxide nanowire includes the steps of: combining an amount of a transition metal or a transition metal oxide with an amount of an alkali metal compound to produce a mixture; activating a plasma discharge reactor to create a plasma discharge; exposing the mixture to the plasma discharge for a first predetermined time period such that transition metal oxide nanowires are formed; contacting the transition metal oxide nanowires with an acid solution such that an alkali metal ion is exchanged for a hydrogen ion on each of the transition metal oxide nanowires; and exposing the transition metal oxide nanowires to the plasma discharge for a second predetermined time period to thermally anneal the transition metal oxide nanowires. Transition metal oxide nanowires produced using the synthesis methods described herein are also provided.

  10. Catalytic effect of transition metals on microwave-induced degradation of atrazine in mineral micropores.

    PubMed

    Hu, Erdan; Cheng, Hefa

    2014-06-15

    With their high catalytic activity for redox reactions, transition metal ions (Cu(2+) and Fe(3+)) were exchanged into the micropores of dealuminated Y zeolites to prepare effective microporous mineral sorbents for sorption and microwave-induced degradation of atrazine. Due to its ability to complex with atrazine, loading of copper greatly increased the sorption of atrazine. Atrazine sorption on iron-exchanged zeolites was also significantly enhanced, which was attributed to the hydrolysis of Fe(3+) polycations in mineral micropores and electrostatic interactions of protonated atrazine molecules with the negatively charged pore wall surface. Copper and iron species in the micropores also significantly accelerated degradation of the sorbed atrazine (and its degradation intermediates) under microwave irradiation. The catalytic effect was attributed to the easy reducibility and high oxidation activity of Cu(2+) and Fe(3+) species stabilized in the micropores of the zeolites. It was postulated that the surface species of transition metals (monomeric Cu(2+), Cu(2+)-O-Cu(2+) complexes, FeO(+), and dinuclear Fe-O-Fe-like species) in the mineral micropores were thermally activated under microwave irradiation, and subsequently formed highly reactive sites catalyzing oxidative degradation of atrazine. The transition metal-exchanged zeolites, particularly the iron-exchanged ones, were relatively stable when leached under acidic conditions, which suggests that they are reusable in sorption and microwave-induced degradation. These findings offer valuable insights on designing of effective mineral sorbents that can selectively uptake atrazine from aqueous solutions and catalyze its degradation under microwave irradiation.

  11. Transition metal (Mn, Fe, Co, Ni)-doped graphene hybrids for electrocatalysis.

    PubMed

    Toh, Rou Jun; Poh, Hwee Ling; Sofer, Zdeněk; Pumera, Martin

    2013-06-01

    The development of electrocatalysts is crucial for renewable energy applications. Metal-doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal-doped graphene hybrids were synthesized by a simple and scalable method. Metal-doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel-doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O2 when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.

  12. The importance of atomic and molecular correlation on the bonding in transition metal compounds

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Walch, Stephen P.

    1986-01-01

    The determination of accurate spectroscopic parameters for molecular systems containing transition metal atoms is shown to require extensive data sets and a high level correlation treatment, and techniques and their limitations are considered. Extensive results reported on the transition metal atoms, hydrides, oxides, and dimers makes possible the design of a calculation to correctly describe the mixing of different atomic asymptotes, and to give a correct balance between molecular bonding and exchange interactions. Examples considered include the dipole moment of the 2Delta state of NiH, which can help determine the mixture of 3d(8)4s(2) and 3d(9)4s(1) in the NiH wavefunction, and the bonding in CrO, where an equivalent description of the relative energies associated with the Cr 3d-3d atomic exchange and the Cr-O bond is important.

  13. Self-assembly of noble metal monolayers on transition metal carbide nanoparticle catalysts.

    PubMed

    Hunt, Sean T; Milina, Maria; Alba-Rubio, Ana C; Hendon, Christopher H; Dumesic, James A; Román-Leshkov, Yuriy

    2016-05-20

    We demonstrated the self-assembly of transition metal carbide nanoparticles coated with atomically thin noble metal monolayers by carburizing mixtures of noble metal salts and transition metal oxides encapsulated in removable silica templates. This approach allows for control of the final core-shell architecture, including particle size, monolayer coverage, and heterometallic composition. Carbon-supported Ti(0.1)W(0.9)C nanoparticles coated with Pt or bimetallic PtRu monolayers exhibited enhanced resistance to sintering and CO poisoning, achieving an order of magnitude increase in specific activity over commercial catalysts for methanol electrooxidation after 10,000 cycles. These core-shell materials provide a new direction to reduce the loading, enhance the activity, and increase the stability of noble metal catalysts.

  14. Mercury Induced by Pressure to act as a Transition Metal in Mercury Fluorides

    NASA Astrophysics Data System (ADS)

    Botana, Jorge; Wang, Xiaoli; Hou, Chunju; Yan, Dadong; Lin, Haiqing; Ma, Yanming; Miao, Mao-Sheng

    The question of whether Hg is a transition metal remains open for stable solids. In our work we propose that high-pressure techniques will help prepare unusual oxidation states of Hg in Hg-F compounds. By means of ab initio calculations and an advanced structure-search algorithm we find that under high pressure charge is transferred from the Hg d orbitals to the F, and becomes a transition metal. HgF3 and HgF4 have been found to be stable compounds at high pressure. HgF4 consists of planar molecules, a typical geometry for d8 metallic centers. HgF3 is an example of metallic and ferromagnetic compound, with an electronic structure analogous to transparent conductors due to the Hg d9 configuration.

  15. Raman scattering in transition metal compounds: Titanium and compounds of titanium

    SciTech Connect

    Jimenez, J.; Ederer, D.L.; Shu, T.

    1997-04-01

    The transition metal compounds form a very interesting and important set of materials. The diversity arises from the many states of ionization the transition elements may take when forming compounds. This variety provides ample opportunity for a large class of materials to have a vast range of electronic and magnetic properties. The x-ray spectroscopy of the transition elements is especially interesting because they have unfilled d bands that are at the bottom of the conduction band with atomic like structure. This group embarked on the systematic study of transition metal sulfides and oxides. As an example of the type of spectra observed in some of these compounds they have chosen to showcase the L{sub II, III} emission and Raman scattering in some titanium compounds obtained by photon excitation.

  16. Method of synthesizing bulk transition metal carbide, nitride and phosphide catalysts

    DOEpatents

    Choi, Jae Soon; Armstrong, Beth L; Schwartz, Viviane

    2015-04-21

    A method for synthesizing catalyst beads of bulk transmission metal carbides, nitrides and phosphides is provided. The method includes providing an aqueous suspension of transition metal oxide particles in a gel forming base, dropping the suspension into an aqueous solution to form a gel bead matrix, heating the bead to remove the binder, and carburizing, nitriding or phosphiding the bead to form a transition metal carbide, nitride, or phosphide catalyst bead. The method can be tuned for control of porosity, mechanical strength, and dopant content of the beads. The produced catalyst beads are catalytically active, mechanically robust, and suitable for packed-bed reactor applications. The produced catalyst beads are suitable for biomass conversion, petrochemistry, petroleum refining, electrocatalysis, and other applications.

  17. Transition Metal-Promoted V2CO2 (MXenes): A New and Highly Active Catalyst for Hydrogen Evolution Reaction.

    PubMed

    Ling, Chongyi; Shi, Li; Ouyang, Yixin; Chen, Qian; Wang, Jinlan

    2016-11-01

    Developing alternatives to precious Pt for hydrogen production from water splitting is central to the area of renewable energy. This work predicts extremely high catalytic activity of transition metal (Fe, Co, and Ni) promoted two-dimensional MXenes, fully oxidized vanadium carbides (V2CO2), for hydrogen evolution reaction (HER). The first-principle calculations show that the introduction of transition metal can greatly weaken the strong binding between hydrogen and oxygen and engineer the hydrogen adsorption free energy to the optimal value ≈0 eV by choosing the suitable type and coverage of the promoters as well as the active sites. Strain engineering on the performance of transition metal promoted V2CO2 further reveals that the excellent HER activities can maintain well while those poor ones can be modulated to be highly active. This study provides new possibilities for cost-effective alternatives to Pt in HER and for the application of 2D MXenes.

  18. Early Transition Metal Alkyl and Tetrahydroborate Complexes.

    NASA Astrophysics Data System (ADS)

    Jensen, James Allen

    1988-06-01

    An investigation of early transition metal alkyl and tetrahydroborate complexes as catalytic models and ceramic precursors has been initiated. The compounds MX _2 (dmpe)_2, dmpe = 1,2-bis(dimethylphosphino)ethane, for M = Ti, V, Cr, and X = Br, I, BH_4, have been prepared. These complexes are paramagnetic and have been shown by X-ray crystallography to have trans-octahedral structures. The BH_4^{-} groups in Ti(BH_4)_2(dmpe) _2 bond to the metal in a bidentate manner. This structure is in marked contrast to the structure of the vanadium analogue, V(BH_4)_2 (dmpe)_2, which displays two unidentate BH_4^{-} groups. Alkylation of Ti(BH_4)_2 (dmpe)_2 with LiMe results in the complex TiMe_2(dmpe) _2 which is diamagnetic in both solution and solid state. Single crystal X-ray and neutron diffraction studies show that there may be strong Ti-C pi -bonding. A tetragonal compression along the C -Ti-C bond vector accounts for the observed diamegnetism. A series of complexes of the formula Ti(BH _4)_3(PR_3)_2 has been prepared where PR_3 = PMe_3, PEt_3, PMe_3Ph, and P(OMe)_3 . The X-ray crystal structure of Ti(BH _4)_3(PMe_3)_2 reveals a pseudo trigonal bipyramidal geometry in which two BH_4^{-} groups display an unusual "side-on" bonding mode. The "side-on" ligation mode has been attributed to a Jahn-Teller distortion of the orbitally degenerate d^1 ground state. In contrast, the non-Jahn-Teller susceptible vanadium analogue, V(BH_4)_3 (PMe_3)_2, possesses a nearly ideal D_{rm 3h} >=ometry with three bidentate tetrahydroborate groups. Addition of excess PMe_3 to V(BH_4)_3(PMe _3)_2<=ads to the vanadium(II) hydride -bridged dimer (V(H)(BH_4)(PMe _3)_2]_2, while addition of PMe_3 and water forms the vanadium(III) oxo dimer (V(BH_4)_2 (PMe_3)_2]_2 [mu-O) which has been structurally characterized. The compound Ti(CH_2CMe _3)_4 can be prepared by addition of Ti(OEt)_4 to LiCH_2 CMe_3. Sublimation of Ti(CH _2CMe_3)_4 over a substrate heated to 250^ circC results in the chemical vapor

  19. Role of OGG1 and NTG2 in the repair of oxidative DNA damage and mutagenesis induced by hydrogen peroxide in Saccharomyces cerevisiae: relationships with transition metals iron and copper.

    PubMed

    Melo, R G M; Leitão, A C; Pádula, M

    2004-09-01

    The base excision repair pathway of Saccharomyces cerevisiae possesses three DNA N-glycosylases, viz. Ogg1p, Ngt1p and Ntg2p, involved in the repair of oxidative DNA damage. It was previously reported that inactivation of any of these activities, in most cases, did not generate a sensitive mutant phenotype to a variety of oxidative agents. Only the ntg1 mutant appeared to be more sensitive to hydrogen peroxide (H2O2) than a wild-type (WT) strain. In the present study we evaluated the role of S. cerevisiae OGG1 and NTG2 genes in the repair of oxidative lesions induced by high H2O2 concentrations (5-100 mM for 20 min), followed by catalase treatment (500 IU/ml). In these conditions, the ogg1 mutant was more sensitive than the WT strain to H2O2 (concentration 40-60 mM). Unexpectedly, the inactivation of NTG2 in an ogg1 background was able to suppress both sensitivity and mutagenesis induced by H2O2. Indeed, even the ntg2 single mutant was more resistant than the WT (60-100 mM H2O2). The use of metal ion chelators dipyridyl and neocuproine allowed us to evaluate the participation of iron and copper ions in the production of lethal and mutagenic lesions during H2O2 treatment in different DNA repair-deficient S. cerevisiae strains. The roles of OGG1 and NTG2 genes in the repair of lethal and mutagenic oxidative lesions induced by H2O2 and their relationships with iron and copper ions are discussed.

  20. Synthesis, structural studies, kinetic stability, and oxidation catalysis of the late first row transition metal complexes of 4,10-dimethyl-1,4,7,10-tetraazabicyclo[6.5.2]pentadecane.

    PubMed

    Matz, Dallas L; Jones, Donald G; Roewe, Kimberly D; Gorbet, Michael-Joseph; Zhang, Zhan; Chen, Zhuqi; Prior, Timothy J; Archibald, Stephen J; Yin, Guochuan; Hubin, Timothy J

    2015-07-21

    Synthetic details for 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.5.2]pentadecane, the dimethyl ethylene cross-bridged homocyclen ligand are presented for the first time. Its novel Mn(2+), Fe(2+), Mn(3+), and Fe(3+) complexes have been synthesized and characterized. X-ray crystal structures were obtained for both manganese complexes, along with five additional Co(3+), Cu(2+), and Zn(2+) structures, the first structural characterization of complexes of this ligand. Each complex has the cis-V configuration of the cross-bridged macrocycle ring, leaving cis labile binding sites for interaction of the complex with oxidants and/or substrates. The copper(II) complex kinetic stability in 5 M HCl and at elevated temperatures was determined and compared to related complexes in the literature. The electronic properties of the manganese and iron complexes were evaluated using solid state magnetic moment determination and acetonitrile solution electronic spectroscopy, revealing high spin metal complexes in all cases. Cyclic voltammetry in acetonitrile of the divalent iron and manganese complexes revealed reversible redox processes, suggesting catalytic reactivity involving electron transfer processes are possible for both complexes. Screening of the Mn(2+) and Fe(2+) complexes for oxidation catalysis using hydrogen peroxide as the terminal oxidant showed both complexes are worthy of continued development.

  1. Flexible transition metal dichalcogenide nanosheets for band-selective photodetection

    PubMed Central

    Velusamy, Dhinesh Babu; Kim, Richard Hahnkee; Cha, Soonyoung; Huh, June; Khazaeinezhad, Reza; Kassani, Sahar Hosseinzadeh; Song, Giyoung; Cho, Suk Man; Cho, Sung Hwan; Hwang, Ihn; Lee, Jinseong; Oh, Kyunghwan; Choi, Hyunyoug; Park, Cheolmin

    2015-01-01

    The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 μm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra. PMID:26333531

  2. [Transition metal mediated transformations of small molecules

    SciTech Connect

    Sen, A.

    1992-01-01

    Work on organotransition metal chemistry, homogeneous and heterogeneous catalysis is summarized. Several cationic palladium(II) complexes with bulky phosphine or pyridine ligands were discovered that are highly selective catalysts for linear dimerization of vinyl monomers and linear polymerization of p-divinylbenzene, the reactions proceeding through a carbocationic mechanism. Our studies were continued on alternating olefin-carbon monoxide copolymers. The copolymerization reaction and reactivity of copolymers were examined. New catalytic systems for alternating copolymerization of [alpha]-olefins with CO were discovered. In the case of styrene derivatives, tactic copolymers were obtained. Poly(ethylenepyrrolediyl) derivatives were synthesized from alternating ethylene-carbon monoxide copolymer and become electronic conductors when doped with iodine. A catalytic system for direct synthesis of polyureas and polyoxamides from and diamines was also discovered. Pt metal catalyzed the oxidation of ethers, esters, and amines to carboxylic acids and the oxidation of olefins to 1,2-diols. Anaerobic and aerobic decomposition of molybdenum(VI)-oxoalkyl compounds were studied for heterogeneous oxidation of alkanes and olefins on Mo(VI)-oxide surfaces. Synthesis of polymer-trapped metal, metal oxide, and metal sulfide nanoclusters (size <1--10 nm) was studied.

  3. Transition Metal-Participated Synthesis and Utilization of N-containing Heterocycles: Exploring for Nitrogen Sources.

    PubMed

    Gao, Mingchun; Xu, Bin

    2016-06-01

    This account aims to describe our recent efforts on the synthesis and utilization of N-containing heterocycles, where transition metals participate in the synthesis. A variety of nitrogen sources, including amines, amides, hydrazones, pyrimidines, isocyanides, and copper nitrate, have been disclosed for the synthesis of diverse bioactive and pharmacologically interesting N-containing heterocycles under the participation of transition metals. The well-known nitrogen sources, such as amines and amides, were used for the construction of indoles, isatins, and quinolones. Dihydrophthalazines, isoquinolines, indazoles, and pyrazoles were obtained from hydrazones, while various pyrimidine-containing heterocycles were afforded through regioselective C-H functionalizations using pyrimidine as the directing group. Recent research has focused on the chemistry of isocyanides to achieve several kinds of heterocyclic compounds with high efficiency under the catalysis of transition metals (Pd, Rh, Mn, Cu), through oxidative cyanation reactions, sequential isocyanide insertions into C-H, N-H, or O-H bonds, and tandem radical annulation. More recently, an efficient route to isoxazolines has been reported using copper nitrate as a novel nitrogen source.

  4. Transition-metal doped sulfide, selenide, and telluride laser crystal and lasers

    DOEpatents

    Krupke, William F.; Page, Ralph H.; DeLoach, Laura D.; Payne, Stephen A.

    1996-01-01

    A new class of solid state laser crystals and lasers are formed of transition metal doped sulfide, selenide, and telluride host crystals which have four fold coordinated substitutional sites. The host crystals include II-VI compounds. The host crystal is doped with a transition metal laser ion, e.g., chromium, cobalt or iron. In particular, Cr.sup.2+ -doped ZnS and ZnSe generate laser action near 2.3 .mu.m. Oxide, chloride, fluoride, bromide and iodide crystals with similar structures can also be used. Important aspects of these laser materials are the tetrahedral site symmetry of the host crystal, low excited state absorption losses and high luminescence efficiency, and the d.sup.4 and d.sup.6 electronic configurations of the transition metal ions. The same materials are also useful as saturable absorbers for passive Q-switching applications. The laser materials can be used as gain media in amplifiers and oscillators; these gain media can be incorporated into waveguides and semiconductor lasers.

  5. Transition-metal doped sulfide, selenide, and telluride laser crystal and lasers

    DOEpatents

    Krupke, W.F.; Page, R.H.; DeLoach, L.D.; Payne, S.A.

    1996-07-30

    A new class of solid state laser crystals and lasers are formed of transition metal doped sulfide, selenide, and telluride host crystals which have four fold coordinated substitutional sites. The host crystals include II-VI compounds. The host crystal is doped with a transition metal laser ion, e.g., chromium, cobalt or iron. In particular, Cr{sup 2+}-doped ZnS and ZnSe generate laser action near 2.3 {micro}m. Oxide, chloride, fluoride, bromide and iodide crystals with similar structures can also be used. Important aspects of these laser materials are the tetrahedral site symmetry of the host crystal, low excited state absorption losses and high luminescence efficiency, and the d{sup 4} and d{sup 6} electronic configurations of the transition metal ions. The same materials are also useful as saturable absorbers for passive Q-switching applications. The laser materials can be used as gain media in amplifiers and oscillators; these gain media can be incorporated into waveguides and semiconductor lasers. 18 figs.

  6. Position-sensitive change in the transition metal L-edge fine structures

    SciTech Connect

    Gulec, Ahmet; Phillips, Patrick J.; Klie, Robert F.

    2015-10-05

    Studying the structure and composition of solid-state materials on the atomic scale has become nearly routine in transmission electron microscopy with the development of novel electron optics and electron sources. In particular, with spatial resolutions better than 0.1 nm and energy resolution smaller than 100 meV, the stoichiometry, bonding, and coordination can now be examined on similar scales. Aberration-corrected scanning transmission electron microscopy and electron energy-loss spectroscopy (EELS) have played a crucial role in identifying charge ordering, valence, and as spin state transitions in transition metal perovskite oxides. In this letter, we investigate the effects of ever-decreasing electron-probe sizes on the measured near-edge fine-structure of the transition metal core-loss edge using EELS. We find that for certain transition metal perovskites, the position of the electron probe with respect to the atomic column is crucial in determining the correct valence state. Several reasons for the observed position-sensitive EELS fine-structure are discussed.

  7. Effect of transition metal salts on the initiated chemical vapor deposition of polymer thin films

    SciTech Connect

    Kwong, Philip; Seidel, Scott; Gupta, Malancha

    2015-05-15

    In this work, the effect of transition metal salts on the initiated chemical vapor deposition of polymer thin films was studied using x-ray photoelectron spectroscopy. The polymerizations of 4-vinyl pyridine and 1H,1H,2H,2H-perfluorodecyl acrylate were studied using copper(II) chloride (CuCl{sub 2}) and iron(III) chloride (FeCl{sub 3}) as the transition metal salts. It was found that the surface coverages of both poly(4-vinyl pyridine) (P4VP) and poly(1H,1H,2H,2H-perfluorodecyl acrylate) were decreased on CuCl{sub 2}, while the surface coverage of only P4VP was decreased on FeCl{sub 3}. The decreased polymer surface coverage was found to be due to quenching of the propagating radicals by the salt, which led to a reduction of the oxidation state of the metal. The identification of this reaction mechanism allowed for tuning of the effectiveness of the salts to decrease the polymer surface coverage through the adjustment of processing parameters such as the filament temperature. Additionally, it was demonstrated that the ability of transition metal salts to decrease the polymer surface coverage could be extended to the fabrication of patterned cross-linked coatings, which is important for many practical applications such as sensors and microelectronics.

  8. The chemistry of transition metals in relation to their potential role in neurodegenerative processes.

    PubMed

    Hamai, D; Bondy, S C; Becaria, A; Campbell, A

    2001-12-01

    Cells rely on several transition metals to regulate a wide range of metabolic and signaling functions. The diversity and efficiency of their physiological functions are derived from atomic properties that are specific to transition metals, most notably an incomplete inner valence subshell. These properties impart upon these elements the ability to fluctuate among a variety of positively charged ionic forms, and a chemical flexibility that allows them to impose conformational changes upon the proteins to which they bind. By this means, transition metals can serve as the catalytic centers of enzymes for redox reactions including molecular oxygen and endogenous peroxides. This review addresses the consequences of the aberrant translocation of the redox-capable essential transition elements, iron, copper, and manganese, upon the brain with an emphasis on uncontrolled and deleterious oxidative events. The potential of metal-protein interactions in facilitating such events, and their association with the physiologically redox-inert metals zinc and aluminum, are related to their postulated contribution to the pathology of neurodegeneration.

  9. Transition Metal and Vacancy Defect Complexes in Phosphorene

    NASA Astrophysics Data System (ADS)

    Kabir, Mukul; Babar, Rohit

    Inducing magnetic moment in otherwise nonmagnetic two-dimensional semiconducting materials is the first step to design spintronic material. Here, we study the adsorption of transition-metals on pristine and defected phosphorene, within density functional theory. We predict that increased transition-meal diffusivity on the pristine phosphorene would hinder controlled magnetism. In contrast, point-defects anchor the transiton-metal to reduce metal diffusivity. The di-vacancy complex is more important in this context due to their increased thermodynamic stability over the mono-vacancy. For most cases, the defect-transition metal complexes retain the intrinsic semiconducting properties, and induce a local moment. We provide a simple microscopic model which describe the local moment of these transition metal and defect complexes.

  10. Biocompatibility of transition metal-substituted cobalt ferrite nanoparticles

    NASA Astrophysics Data System (ADS)

    Sanpo, Noppakun; Tharajak, Jirasak; Li, Yuncang; Berndt, Christopher C.; Wen, Cuie; Wang, James

    2014-07-01

    Transition metals of copper, zinc, manganese, and nickel were substituted into cobalt ferrite nanoparticles via a sol-gel route using citric acid as a chelating agent. The microstructure and elemental compositions of the nanoparticles were characterized using scanning electron microscopy combined with energy dispersive X-ray spectroscopy. The particle size of the nanoparticles was investigated using particle size analyzer, and the zeta potentials were measured using zeta potential analyzer. The phase components of the synthesized transition metal-substituted cobalt ferrite nanoparticles were studied using Raman spectroscopy. The biocompatibility of the nanoparticles was assessed using osteoblast-like cells. Results indicated that the substitution of transition metals strongly influences the physical, chemical properties, and biocompatibility of the cobalt ferrite nanoparticles.

  11. Nanodisperse transition metal electrodes (NTME) for electrochemical cells

    DOEpatents

    Striebel, Kathryn A.; Wen, Shi-Jie

    2000-01-01

    Disclosed are transition metal electrodes for electrochemical cells using gel-state and solid-state polymers. The electrodes are suitable for use in primary and secondary cells. The electrodes (either negative electrode or positive electrode) are characterized by uniform dispersion of the transition metal at the nanoscale in the polymer. The transition metal moiety is structurally amorphous, so no capacity fade should occur due to lattice expansion/contraction mechanisms. The small grain size, amorphous structure and homogeneous distribution provide improved charge/discharge cycling performance, and a higher initial discharge rate capability. The cells can be cycled at high current densities, limited only by the electrolyte conductivity. A method of making the electrodes (positive and negative), and their usage in electrochemical cells are disclosed.

  12. Nanodisperse transition metal electrodes (NTME) for electrochemical cells

    SciTech Connect

    Striebel, Kathryn A.; Wen, Shi-Jie

    1998-12-01

    Disclosed are transition metal electrodes for electrochemical cells using gel-state and solid-state polymers. The electrodes are suitable for use in primary and secondary cells. The electrodes (either negative electrode or positive electrode) are characterized by uniform dispersion of the transition metal at the nanoscale in the polymer. The transition metal moiety is structurally amorphous, so no capacity fade should occur due to lattice expansion/contraction mechanisms. The small grain size, amorphous structure and homogeneous distribution provide improved charge/discharge cycling performance, and a higher initial discharge rate capability. The cells can be cycled at high current densities, limited only by the electrolyte conductivity. A method of making the electrodes (positive and negative), and their usage in electrochemical cells are disclosed.

  13. Strong dependence of fluorescence quenching on the transition metal in layered transition metal dichalcogenide nanoflakes for nucleic acid detection.

    PubMed

    Loo, Adeline Huiling; Bonanni, Alessandra; Pumera, Martin

    2016-08-07

    In recent years, the application of transition metal dichalcogenides for the development of biosensors has been receiving widespread attention from researchers, as demonstrated by the surge in studies present in the field. While different transition metal dichalcogenide materials have been employed for the fabrication of fluorescent biosensors with superior performance, no research has been conducted to draw comparisons across materials containing different transition metals. Herein, the performance of MoS2 and WS2 nanoflakes for the fluorescence detection of nucleic acids is assessed. It is discovered that, at the optimal amount, MoS2 and WS2 nanoflakes exhibit a similar degree of fluorescence quenching, at 75% and 71% respectively. However, MoS2 nanoflakes have better performance in the areas of detection range and selectivity than WS2 nanoflakes. The detection range achieved with MoS2 nanoflakes is 9.60-366 nM while 13.3-143 nM with WS2 nanoflakes. In the context of selectivity, MoS2 nanoflakes display a signal difference of 97.8% between complementary and non-complementary DNA targets, whereas WS2 nanoflakes only exhibit 44.3%. Such research is highly beneficial as it delivers vital insights on how the performance of a fluorescent biosensor can be affected by the transition metal present. Furthermore, these insights can assist in the selection of suitable transition metal dichalcogenide materials for utilization in biosensor development.

  14. Trion formation dynamics in monolayer transition metal dichalcogenides

    SciTech Connect

    Singh, Akashay; Moody, Galan; Schaibley, John R.; Yan, Jiaqiang; Mandrus, David G.; Xu, Xiaodong; Li, Xiaoqun; Tran, Kha; Scott, Marie E.; Overbeck, Vincent; Berghauser, Gunnar; Seifert, Edward J.; Pleskot, Dennis; Gabor, Nathaniel M.; Richter, Marten; Malic, Ermin

    2016-01-05

    Here, we report charged exciton (trion) formation dynamics in doped monolayer transition metal dichalcogenides, specifically molybdenum diselenide (MoSe2), using resonant two-color pump-probe spectroscopy. When resonantly pumping the exciton transition, trions are generated on a picosecond time scale through exciton-electron interaction. As the pump energy is tuned from the high energy to low energy side of the inhomogeneously broadened exciton resonance, the trion formation time increases by ~50%. This feature can be explained by the existence of both localized and delocalized excitons in a disordered potential and suggests the existence of an exciton mobility edge in transition metal dichalcogenides.

  15. Binding of transition metals to S100 proteins

    PubMed Central

    Gilston, Benjamin A.; Skaar, Eric P.; Chazin, Walter J.

    2016-01-01

    The S100 proteins are a unique class of EF-hand Ca2+ binding proteins distributed in a cell-specific, tissue-specific, and cell cycle-specific manner in humans and other vertebrates. These proteins are distinguished by their distinctive homodimeric structure, both intracellular and extracellular functions, and the ability to bind transition metals at the dimer interface. Here we summarize current knowledge of S100 protein binding of Zn2+, Cu2+ and Mn2+ ions, focusing on binding affinities, conformational changes that arise from metal binding, and the roles of transition metal binding in S100 protein function. PMID:27430886

  16. Trion formation dynamics in monolayer transition metal dichalcogenides

    DOE PAGES

    Singh, Akashay; Moody, Galan; Schaibley, John R.; ...

    2016-01-05

    Here, we report charged exciton (trion) formation dynamics in doped monolayer transition metal dichalcogenides, specifically molybdenum diselenide (MoSe2), using resonant two-color pump-probe spectroscopy. When resonantly pumping the exciton transition, trions are generated on a picosecond time scale through exciton-electron interaction. As the pump energy is tuned from the high energy to low energy side of the inhomogeneously broadened exciton resonance, the trion formation time increases by ~50%. This feature can be explained by the existence of both localized and delocalized excitons in a disordered potential and suggests the existence of an exciton mobility edge in transition metal dichalcogenides.

  17. Third Row Transition Metal Hexafluorides, Extraordinary Oxidizers, and Lewis Acids: Electron Affinities, Fluoride Affinities, and Heats of Formation of WF₆, ReF₆, OsF₆, IrF₆, PtF₆, and AuF₆

    SciTech Connect

    Craciun, Raluca; Picone, Desiree; Long, Rebecca T.; Li, Shenggang; Dixon, David A.; Peterson, Kirk A.; Christe, Karl O.

    2010-02-01

    High level electronic structure calculations were used to evaluate reliable, self-consistent thermochemical data sets for the third row transitionmetal hexafluorides. The electron affinities, heats of formation, first (MF₆ → MF₅ + F) and average M-F bond dissociation energies, and fluoride affinities of MF₆ (MF₆ + F⁻→ MF₇ ⁻) and MF₅ (MF₅ + F⁻→ MF₆ ⁻) were calculated. The electron affinities which are a direct measure for the oxidizer strength increase monotonically from WF₆ to AuF₆, with PtF₆ and AuF₆ being extremely powerful oxidizers. The inclusion of spin orbit corrections is necessary to obtain the correct qualitative order for the electron affinities. The calculated electron affinities increase with increasing atomic number, are in good agreement with the available experimental values, and are as follows: WF₆ (3.15 eV), ReF₆ (4.58 eV), OsF₆ (5.92 eV), IrF₆ (5.99 eV), PtF₆ (7.09 eV), and AuF₆ (8.20 eV). A wide range of density functional theory exchange-correlation functionals were also evaluated, and only three gave satisfactory results. The corresponding pentafluorides are extremely strong Lewis acids, with OsF₅, IrF₅, PtF₅, and AuF₅ significantly exceeding the acidity of SbF₅. The optimized geometries of the corresponding MF₇⁻ anions for W through Ir are classical MF₇⁻ anions with M-F bonds; however, for PtF₇⁻ and AuF₇⁻ non-classical anions were found with a very weak external F-F bond between an MF₆⁻ fragment and a fluorine atom. These two anions are text book examples for “superhalogens” and can serve as F atom sources under very mild conditions, explaining the ability of PtF₆ to convert NF₃ to NF₄⁺, ClF₅ to ClF₆⁺, and Xe to XeF⁺ and why Bartlett failed to observe XePtF₆ as the reaction product of the PtF₆/Xe reaction.

  18. A DFT study of the structural, electronic and optical properties of transition metal doped fluorite oxides: Ce0.75M0.25O2 (M=Fe, Co, Ni)

    NASA Astrophysics Data System (ADS)

    Tian, Dong; Zeng, Chunhua; Fu, Yunchang; Wang, Hua; Luo, Hongchun; Xiang, Chao; Wei, Yonggang; Li, Kongzhai; Zhu, Xing

    2016-04-01

    The structural, electronic and optical properties of Ce1-xMxO2 (M=Fe, Co, Ni; x=0, 0.25) fluorite type oxides are studied by using the method of density functional theory (DFT) + U method. The calculated equilibrium lattice parameter, cell volume, bulk modulus and optical properties for CeO2 are in good agreement with the available experimental data and other theoretical results. The lattice parameter, cell volume, bulk modulus and bond length of Ce-O decreased after substituting Ce atom with Fe (or Co, Ni). Meanwhile, the band-gap (Eg) reduction is observed. It is interesting to find that doping of Fe (or Co, Ni) in CeO2 obviously decreases the O 2p-Ce 4f transition intensity and the covalent character of the Ce-O bond. On the contrary, the static dielectric constant ε0 and refractive index n0 for the doped system increased. Compared with the undoped CeO2, the doped system has steep absorption peaks ranging from 1.0 eV to 2.0 eV at lower energy, and it can be used for visible light absorption applications. The Ce0.75Co0.25O2 has a high refractive index and reflectivity, therefore it is suitable as a high-refractive index film material in single and multilayered optical coatings.

  19. Cohesion and promotion energies in the transition metals: Implications of the local-density approximation

    NASA Astrophysics Data System (ADS)

    Watson, R. E.; Fernando, G. W.; Weinert, M.; Wang, Y. J.; Davenport, J. W.

    1991-04-01

    The accuracy of the local-density (LDA) or local-spin-density (LSDA) approximations when applied to transition metals is of great concern. Estimates of the cohesive energy compare the total energy of the solid with that of the free atom. This involves chosing the reference state of the free atom which, as a rule, will not be the free atom's ground state in LDA or LSDA. Comparing one reference state versus another, e.g., the dn-1s vs dn-2s2 for a transition metal, corresponds to calculating an s-d promotion energy Δ, which may be compared with experiment. Gunnarsson and Jones (GJ) [Phys. Rev. B 31, 7588 (1985)] found for the 3d row that the calculated Δ displayed systematic errors which they attributed to a difference in error within the LSDA in the treatment of the coupling of the outer-core electrons with the d versus non-d valence electrons. This study has been extended to relativistic calculations for the 3d, 4d, and 5d rows and for other promotions. The situation is more complicated than suggested by GJ, and its implications for cohesive energy estimates will be discussed.

  20. Mechanistic investigations of CO-photoextrusion and oxidative addition reactions of early transition-metal carbonyls: (η(5)-C5H5)M(CO)4 (M = V, Nb, Ta).

    PubMed

    Su, Shih-Hao; Su, Ming-Der

    2016-06-28

    The mechanisms for the photochemical Si-H bond activation reaction are studied theoretically using a model system of the group 5 organometallic compounds, η(5)-CpM(CO)4 (M = V, Nb, and Ta), with the M06-2X method and the Def2-SVPD basis set. Three types of reaction pathways that lead to final insertion products are identified. The structures of the intersystem crossings, which play a central role in these photo-activation reactions, are determined. The intermediates and transitional structures in either the singlet or triplet states are also calculated to provide a mechanistic explanation of the reaction pathways. All of the potential energy surfaces for the group 5 η(5)-CpM(CO)4 complexes are quite similar. In particular, the theoretical evidence suggests that after irradiation using light, η(5)-CpM(CO)4 quickly loses one CO ligand to yield two tricarbonyls, in either the singlet or the triplet states. The triplet tricarbonyl 16-electron intermediates, ([η(5)-CpM(CO)3](3)), play a key role in the formation of the final oxidative addition product, η(5)-CpM(CO)3(H)(SiMe3). However, the singlet counterparts, ([η(5)-CpM(CO)3](1)), play no role in the formation of the final product molecule, but their singlet metal centers interact weakly with solvent molecules ((Me3)SiH) to produce alkyl-solvated organometallic complexes, which are observable experimentally. This theoretical evidence is in accordance with the available experimental observations.

  1. Structural and Electrochemical Characterization of Lithium Transition Metal Phosphates

    NASA Astrophysics Data System (ADS)

    Hashambhoy, Ayesha Maria

    The lithium ion battery has emerged as one of the most promising hybrid vehicle energy storage systems of the future. Of the potential cathode chemistries explored, lithium transition metal phosphates have generated a significant amount of interest due to their low-cost precursors, potential ease of synthesis, stability, and their environmentally friendly nature. This is in contrast to layered oxide systems such as LiCoO2, which have long been considered state of the art, but are now being reevaluated due to their structural instability at elevated temperatures, and higher cost. In particular, LiFePO4 has an operating potential comparable to those batteries available on the market (˜3.5V vs. Li/Li+), and higher theoretical specific capacity (170mAh/g vs. that of LiCoO2 which is 140mAh/g). The manganese analog to LiFePO4, LiMnPO4, exhibits a higher operating potential (˜4.1V v Li/Li+), and the same theoretical capacity, however Li-ion diffusion through this structure is much more rate limited and its theoretical capacity cannot be realized at rates suitable for commercial applications. The purpose of this work was threefold: 1) To explore the impact of Fe substitution on Mn sites in LiMnPO 4. 2) To examine the effects of alterations to the particle/electrolyte interface on rate capability. 3) To explore a novel fabrication route for LiMnPO4 using microwaves, and determine an optimal power and time combination for best performance. The coexistence of Fe and Mn on the transition metal site M, of LiMPO 4 resulted in an improved apparent Li-ion diffusivity in both Fe and Mn regimes as compared to that observed for LiFePO4 and LiMnPO 4 respectively. Calculations made from two different analysis methods, cyclic voltammetry (CV) and galvanostatic intermittent titration (GITT) drew this same conclusion. The signature characteristics observed from the CVs pertaining to single and dual phase reactions led to a delithiation model of LiFe0.5Mn0.5PO4 proposing the localization

  2. Nature of the insulating ground state of the 5d postperovskite CaIrO3

    DOE PAGES

    Kim, Sun -Woo; Liu, Chen; Kim, Hyun -Jung; ...

    2015-08-26

    In this study, the insulating ground state of the 5d transition metal oxide CaIrO3 has been classified as a Mott-type insulator. Based on a systematic density functional theory (DFT) study with local, semilocal, and hybrid exchange-correlation functionals, we reveal that the Ir t2g states exhibit large splittings and one-dimensional electronic states along the c axis due to a tetragonal crystal field. Our hybrid DFT calculation adequately describes the antiferromagnetic (AFM) order along the c direction via a superexchange interaction between Ir4+ spins. Furthermore, the spin-orbit coupling (SOC) hybridizes the t2g states to open an insulating gap. These results indicate thatmore » CaIrO3 can be represented as a spin-orbit Slater insulator, driven by the interplay between a long-range AFM order and the SOC. Such a Slater mechanism for the gap formation is also demonstrated by the DFT + dynamical mean field theory calculation, where the metal-insulator transition and the paramagnetic to AFM phase transition are concomitant with each other.« less

  3. Methane Activation by 5 d Transition Metals: Energetics, Mechanisms, and Periodic Trends.

    PubMed

    Armentrout, Peter B

    2017-01-01

    Although it has been known for almost three decades that several 5d transition-metal cations will activate methane at room temperature, a more detailed examination of these reactions across the periodic table has only recently been completed. In this Minireview, we compare and contrast studies of the kinetic energy dependence of these reactions as studied using guided-ion-beam tandem mass spectrometry. Thermochemistry for the various products observed (MH(+) , MH2(+) , MC(+) , MCH(+) , MCH2(+) , and MCH3(+) ) are collected and periodic trends evaluated and discussed. The mechanisms for the reactions as elucidated by synergistic quantum chemical calculations are also reviewed. Recent spectroscopic evidence for the structures of the MCH2(+) dehydrogenation products are discussed as well.

  4. k-asymmetric spin-splitting at the interface between transition metal ferromagnets and heavy metals.

    PubMed

    Grytsyuk, Sergiy; Belabbes, Abderrezak; Haney, Paul M; Lee, Hyun-Woo; Lee, Kyung-Jin; Stiles, M D; Schwingenschögl, Udo; Manchon, Aurelien

    2016-05-01

    We systematically investigate the spin-orbit coupling-induced band splitting originating from inversion symmetry breaking at the interface between a Co monolayer and 4d (Tc, Ru, Rh, Pd, and Ag) or 5d (Re, Os, Ir, Pt, and Au) transition metals. In spite of the complex band structure of these systems, the odd-in-k spin splitting of the bands displays striking similarities with the much simpler Rashba spin-orbit coupling picture. While we do not find salient correlations between the interfacial magnetic anisotropy and the odd-in-k spin-splitting of the bands, we establish a clear connection between the overall strength of the band splitting and the charge transfer between the d-orbitals at the interface. Furthermore, we show that the spin splitting of the Fermi surface scales with the induced orbital moment, weighted by the spin-orbit coupling.

  5. k -asymmetric spin splitting at the interface between transition metal ferromagnets and heavy metals

    NASA Astrophysics Data System (ADS)

    Grytsyuk, Sergiy; Belabbes, Abderrezak; Haney, Paul M.; Lee, Hyun-Woo; Lee, Kyung-Jin; Stiles, M. D.; Schwingenschlögl, Udo; Manchon, Aurelien

    2016-05-01

    We systematically investigate the spin-orbit coupling-induced band splitting originating from inversion symmetry breaking at the interface between a Co monolayer and 4 d (Tc, Ru, Rh, Pd, and Ag) or 5 d (Re, Os, Ir, Pt, and Au) transition metals. In spite of the complex band structure of these systems, the odd-in-k spin splitting of the bands displays striking similarities with the much simpler Rashba spin-orbit coupling picture. We establish a clear connection between the overall strength of the odd-in-k spin splitting of the bands and the charge transfer between the d orbitals at the interface. Furthermore, we show that the spin splitting of the Fermi surface scales with the induced orbital moment, weighted by the spin-orbit coupling.

  6. k-asymmetric spin-splitting at the interface between transition metal ferromagnets and heavy metals

    PubMed Central

    Grytsyuk, Sergiy; Belabbes, Abderrezak; Haney, Paul M.; Lee, Hyun-Woo; Lee, Kyung-Jin; Stiles, M. D.; Schwingenschögl, Udo; Manchon, Aurelien

    2016-01-01

    We systematically investigate the spin-orbit coupling-induced band splitting originating from inversion symmetry breaking at the interface between a Co monolayer and 4d (Tc, Ru, Rh, Pd, and Ag) or 5d (Re, Os, Ir, Pt, and Au) transition metals. In spite of the complex band structure of these systems, the odd-in-k spin splitting of the bands displays striking similarities with the much simpler Rashba spin-orbit coupling picture. While we do not find salient correlations between the interfacial magnetic anisotropy and the odd-in-k spin-splitting of the bands, we establish a clear connection between the overall strength of the band splitting and the charge transfer between the d-orbitals at the interface. Furthermore, we show that the spin splitting of the Fermi surface scales with the induced orbital moment, weighted by the spin-orbit coupling. PMID:27441303

  7. Transition-metal-free trifluoromethylthiolation of N-heteroarenes.

    PubMed

    Honeker, Roman; Ernst, Johannes B; Glorius, Frank

    2015-05-26

    A general and efficient methodology for the direct transition metal free trifluoromethylthiolation of a broad range of biologically relevant N-heteroarenes is reported employing abundant sodium chloride as the catalyst. This method is operationally simple, exhibits high functional group tolerance, and does not require protecting groups.

  8. Luminescent molecular rods - transition-metal alkynyl complexes.

    PubMed

    Yam, Vivian Wing-Wah; Wong, Keith Man-Chung

    2005-01-01

    A number of transition-metal complexes have been reported to exhibit rich luminescence, usually originating from phosphorescence. Such luminescence properties of the triplet excited state with a large Stoke's shift, long lifetime, high luminescence quantum yield as well as lower excitation energy, are envisaged to serve as an ideal candidate in the area of potential applications for chemosensors, dye-sensitized solar cells, flat panel displays, optics, new materials and biological sciences. Organic alkynes (poly-ynes), with extended or conjugatedπ-systems and rigid structure with linear geometry, have become a significant research area due to their novel electronic and physical properties and their potential applications in nanotechnology. Owing to the presence of unsaturated sp-hybridized carbon atoms, the alkynyl unit can serve as a versatile building block in the construction of alkynyl transition-metal complexes, not only throughσ-bonding but also viaπ-bonding interactions. By incorporation of linear alkynyl groups into luminescent transition-metal complexes, the alkynyl moiety with goodσ-donor,π-donor andπ-acceptor abilities is envisaged to tune or perturb the emission behaviors, including emission energy (color), intensity and lifetime by its role as an auxiliary ligand as well as to govern the emission origin from its direct involvement. This review summarizes recent efforts on the synthesis of luminescent rod-like alkynyl complexes with different classes of transition metals and details the effects of the introduction of alkynyl groups on the luminescence properties of the complexes.

  9. Mechanisms of transition-metal gettering in silicon

    SciTech Connect

    Myers, S. M.; Seibt, M.; Schroeter, W.

    2000-10-01

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed. Methods for mathematical modeling of gettering are discussed and illustrated. Needs for further research are considered. (c) 2000 American Institute of Physics.

  10. Biomass transition metal hydrogen-evolution electrocatalysts and electrodes

    DOEpatents

    Chen, Wei-Fu; Iyer, Shweta; Iyer, Shilpa; Sasaki, Kotaro; Muckerman, James T.; Fujita, Etsuko

    2017-02-28

    A catalytic composition from earth-abundant transition metal salts and biomass is disclosed. A calcined catalytic composition formed from soybean powder and ammonium molybdate is specifically exemplified herein. Methods for making the catalytic composition are disclosed as are electrodes for hydrogen evolution reactions comprising the catalytic composition.

  11. Binding and catalytic reduction of NO by transition metal aluminosilicates

    SciTech Connect

    Klier, K.; Herman, R.G.; Hou, Shaolie.

    1991-09-01

    The objective of this research is to provide the scientific understanding of processes that actively and selectively reduce NO in dilute exhaust streams, as well as in concentrated streams, to N{sub 2}. Experimental studies of NO chemistry in transition metal-containing aluminosilicate catalysts are being carried out with the aim of determining the chemical rules for NO reduction on non-precious metals. The catalyst supports chosen for this investigation are A and Y zeolites, mordenite, and monoliths based on cordierite. The supported transition metal cations that were examined are principally the first row redox metals, e.g. Cr(2), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Cu(I). The reactions of interest are the reductions of NO by H{sub 2}, CO, and CH{sub 4}, as well as the disproportionation of NO. Rare earth cations that possess redox properties were placed in the more shielded sites, e.g. Site I in Y zeolite, prior to or simultaneously with the exchange procedure with the transition metal cations. Theoretical calculations of the electronic structure of the transition metal cations in zeolitic sites were carried out by ab initio methods. The aim of this part of the research is to find the best match between the metal-based antibonding orbitals and the antibonding orbitals of the NO molecule such that the N-O bond is weakened and is readily broken. 9 refs., 4 figs., 3 tabs.

  12. The Electrochemical Synthesis of Transition-Metal Acetylacetonates

    ERIC Educational Resources Information Center

    Long, S. R.; Browning, S. R.; Lagowski, J. J.

    2008-01-01

    The electrochemical synthesis of transition-metal acetylacetonates described here can form the basis of assisting in the transformation of an entry-level laboratory course into a research-like environment where all members of a class are working on the same problem, but where each member has a personal responsibility for the synthesis and…

  13. Well-defined transition metal hydrides in catalytic isomerizations.

    PubMed

    Larionov, Evgeny; Li, Houhua; Mazet, Clément

    2014-09-07

    This Feature Article intends to provide an overview of a variety of catalytic isomerization reactions that have been performed using well-defined transition metal hydride precatalysts. A particular emphasis is placed on the underlying mechanistic features of the transformations discussed. These have been categorized depending upon the nature of the substrate and in most cases discussed following a chronological order.

  14. Comparative Study of Catalysts containing Transition Metals in Production of Carbon Nanotubes

    NASA Astrophysics Data System (ADS)

    Vesselényi, I.; Niesz, K.; Kónya, Z.; Nagy, J. B.; Kiricsi, I.

    2002-10-01

    For production of multiwall carbon nanotubes (MWNT) by catalytic chemical vapour deposition (CCVD) different transition metals supported on amorphous or crystalline oxides such as silica, alumina or zeolites were used. In several cases both the productivity of catalysts and the quality of MWNT are improved by using bimetallic catalysts such as Co-Fe, Co-V etc. In this publication we report the results in comparison of mono and bimetallic catalysts of Co, Fe, Ni and V supported on alumina, zeolite 13X-FAU and zeolite ZSM-5-MFI.

  15. Synthesis and Characterization of Layered Double Hydroxides Containing Optically Active Transition Metal Ion

    NASA Astrophysics Data System (ADS)

    Tyagi, S. B.; Kharkwal, Aneeta; Nitu; Kharkwal, Mamta; Sharma, Raghunandan

    2017-01-01

    The acetate intercalated layered double hydroxides of Zn and Mn, have been synthesized by chimie douce method. The materials were characterized by XRD, TGA, CHN, IR, XPS, SEM-EDX and UV-visible spectroscopy. The photoluminescence properties was also studied. The optical properties of layered hydroxides are active transition metal ion dependent, particularly d1-10 system plays an important role. Simultaneously the role of host - guest orientation has been considered the basis of photoluminescence. Acetate ion can be exchanged with iodide and sulphate ions. The decomposed product resulted the pure phase Mn doped zinc oxide are also reported.

  16. Ellipsometric method for the measurement of temperature and optical constants of incandescent transition metals

    NASA Technical Reports Server (NTRS)

    Hansen, George P.; Krishnan, Shankar; Hauge, Robert H.; Margrave, John L.

    1989-01-01

    The development of a unique noncontact temperature measurement device utilizing rotating analyzer ellipsometry is described. The technique circumvents the necessity of spectral emissivity estimation by direct measurement concomitant with radiance brightness. Simultaneous determinations of dielectric constants and refractive indices allow changes in the physical and chemical state of a heated surface to be monitored. The results of optical property measurements at 633 nm as functions of temperature between 1000 and 2500 K for eight transition metals including Hf, Ir, Mo, Nb, Pd, Pt, Ta, and V are presented together with preliminary results of oxidation studies on iridium.

  17. High-pressure synthesis, crystal structures, and magnetic properties of 5d double-perovskite oxides Ca2MgOsO6 and Sr2MgOsO6.

    PubMed

    Yuan, Yahua; Feng, Hai L; Ghimire, Madhav Prasad; Matsushita, Yoshitaka; Tsujimoto, Yoshihiro; He, Jianfeng; Tanaka, Masahiko; Katsuya, Yoshio; Yamaura, Kazunari

    2015-04-06

    Double-perovskite oxides Ca2MgOsO6 and Sr2MgOsO6 have been synthesized under high-pressure and high-temperature conditions (6 GPa and 1500 °C). Their crystal structures and magnetic properties were studied by a synchrotron X-ray diffraction experiment and by magnetic susceptibility, specific heat, isothermal magnetization, and electrical resistivity measurements. Ca2MgOsO6 and Sr2MgOsO6 crystallized in monoclinic (P21/n) and tetragonal (I4/m) double-perovskite structures, respectively; the degree of order of the Os and Mg arrangement was 96% or higher. Although Ca2MgOsO6 and Sr2MgOsO6 are isoelectric, a magnetic-glass transition was observed for Ca2MgOsO6 at 19 K, while Sr2MgOsO6 showed an antiferromagnetic transition at 110 K. The antiferromagnetic-transition temperature is the highest in the family. A first-principles density functional approach revealed that Ca2MgOsO6 and Sr2MgOsO6 are likely to be antiferromagnetic Mott insulators in which the band gaps open, with Coulomb correlations of ∼1.8-3.0 eV. These compounds offer a better opportunity for the clarification of the basis of 5d magnetic sublattices, with regard to the possible use of perovskite-related oxides in multifunctional devices. The double-perovskite oxides Ca2MgOsO6 and Sr2MgOsO6 are likely to be Mott insulators with a magnetic-glass (MG) transition at ∼19 K and an antiferromagnetic (AFM) transition at ∼110 K, respectively. This AFM transition temperature is the highest among double-perovskite oxides containing single magnetic sublattices. Thus, these compounds offer valuable opportunities for studying the magnetic nature of 5d perovskite-related oxides, with regard to their possible use in multifunctional devices.

  18. First principle study of AlX (X=3d, 4d, 5d elements and Lu) dimer.

    PubMed

    Ouyang, Yifang; Wang, Jianchuan; Hou, Yuhua; Zhong, Xiaping; Du, Yong; Feng, Yuanping

    2008-02-21

    The ground state equilibrium bond length, harmonic vibrational frequency, and dissociation energy of AlX (X=3d,4d,5d elements and Lu) dimers are investigated by density functional method B3LYP. The present results are in good agreement with the available experimental and other theoretical values except the dissociation energy of AlCr. The present calculations show that the late transition metal can combine strongly with aluminum compared with the former transition metal. The present calculation also indicates that it is more reasonable to replace La with Lu in the Periodic Table and that the bonding strengths of zinc, cadmium, and mercury with aluminum are very weak.

  19. Transition Metal d-Orbital Splitting Diagrams: An Updated Educational Resource for Square Planar Transition Metal Complexes

    ERIC Educational Resources Information Center

    Bo¨rgel, Jonas; Campbell, Michael G.; Ritter, Tobias

    2016-01-01

    The presentation of d-orbital splitting diagrams for square planar transition metal complexes in textbooks and educational materials is often inconsistent and therefore confusing for students. Here we provide a concise summary of the key features of orbital splitting diagrams for square planar complexes, which we propose may be used as an updated…

  20. Solid-state chemistry on a surface and in a beaker: Unconventional routes to transition metal chalcogenide nanomaterials

    SciTech Connect

    Stender, Christopher L.; Sekar, Perumal; Odom, Teri W.

    2008-07-15

    This article focuses on two different approaches to create nanoscale transition metal chalcogenide materials. First, we used chemical nanofabrication, a combination of top-down patterning and bottom-up solid-state synthesis, to achieve control over the shape, size, and ordering of the patterned nanomaterials. We demonstrated orientational control over nanocrystals within sub-300 nm patterns of MoS{sub 2} and formed free-standing nanostructures of crystalline NiS{sub 2}. In addition, crossed line arrays of mixed metal chalcogenide nanostructures were achieved, and TaS{sub 2} nanopatterns were made by the chemical transformation of tantalum oxide templates. Second, we developed a one-pot procedure using molecular precursors to synthesize two-dimensional NbSe{sub 2}, TaS{sub 2} and TaSe{sub 2} nanoplates and one-dimensional NbSe{sub 2} wires depending on the relative amount of surfactants in the reaction mixture. Prospects for these transition metal chalcogenide nanomaterials with controlled shapes and morphologies will be discussed. - Graphical abstract: This paper describes how transition metal chalcogenide nanomaterials can be produced by two approaches. First, chemical nanofabrication-a combination of top-down patterning and bottom-up solid-state synthesis-was used to achieve control over the shape, size, and ordering of patterned nanomaterials. Second, a one-pot procedure using molecular precursors was developed to synthesize two-dimensional nanoplates and one-dimensional nanowires of conducting transition metal dichalcogenides.

  1. The involvement of transition metal ions on iron-dependent lipid peroxidation.

    PubMed

    Repetto, Marisa G; Ferrarotti, Nidia F; Boveris, Alberto

    2010-04-01

    The metals iron (Fe) and copper (Cu) are considered trace elements, and the metals cobalt (Co) and nickel (Ni) are known as ultra-trace elements, considering their presence in low to very low quantity in humans. The biologic activity of these transition metals is associated with the presence of unpaired electrons that favor their participation in redox reactions. They are part of important enzymes involved in vital biologic processes. However, these transition metals become toxic to cells when they reach elevated tissue concentrations and produce cellular oxidative damage. Phospholipid liposomes (0.5 mg/ml, phosphatidylcholine (PC)/phosphatidylserine (PS), 60/40) were incubated for 60 min at 37 degrees C with 25 microM of Fe2+ in the absence and in the presence of Cu2+, Co2+, and Ni2+ (0-100 microM) with and without the addition of hydrogen peroxide (H2O2, 5-50 microM). Iron-dependent lipid peroxidation in PC/PS liposomes was assessed by thiobarbituric acid-reactive substances (TBARS) production. Metal transition ions promoted lipid peroxidation by H2O2 decomposition and direct homolysis of endogenous hydroperoxides. The Fe2+-H2O2-mediated lipid peroxidation takes place by a pseudo-second order process, and the Cu2+-mediated process by a pseudo-first order reaction. Co2+ and Ni2+ alone do not induce lipid peroxidation. Nevertheless, when they are combined with Fe2+, Fe2+-H2O2-mediated lipid peroxidation was stimulated in the presence of Ni2+ and was inhibited in the presence of Co2+. The understanding of the effects of transition metal ions on phospholipids is relevant to the prevention of oxidative damage in biologic systems.

  2. Two-Dimensional Hexagonal Transition-Metal Oxide for Spintronics.

    PubMed

    Kan, Erjun; Li, Ming; Hu, Shuanglin; Xiao, Chuanyun; Xiang, Hongjun; Deng, Kaiming

    2013-04-04

    Two-dimensional materials have been the hot subject of studies due to their great potential in applications. However, their applications in spintronics have been blocked by the difficulty in producing ordered spin structures in 2D structures. Here we demonstrated that the ultrathin films of recently experimentally realized wurtzite MnO can automatically transform into a stable graphitic structure with ordered spin arrangement via density functional calculation, and the stability of graphitic structure can be enhanced by external strain. Moreover, the antiferromagnetic ordering of graphitic MnO single layer can be switched into half-metallic ferromagnetism by small hole-doping, and the estimated Curie temperature is higher than 300 K. Thus, our results highlight a promising way toward 2D magnetic materials.

  3. RESONANT INELASTIC X-RAY SCATTERING FROM TRANSITION METAL OXIDES.

    SciTech Connect

    HILL,J.P.

    1999-08-23

    Recent developments in hard x-ray resonant inelastic x-ray scattering as a probe of strongly correlated systems are reviewed. Particular attention is paid to studies of Nd{sub 2}CuO{sub 4}. A charge transfer excitation is observed when the incident photon energy is tuned in the vicinity of the copper K-edge. It is shown that the presence of resonant enhancements is controlled by the polarization dependence of the excitation process and by the overlap between a given intermediate state and the particular excitation being studied. This latter observation has shed light on the non-local effects present in certain intermediate states.

  4. Synthesis, structure and physical properties of selected transition metal oxides

    NASA Astrophysics Data System (ADS)

    Waldron, Joanna Elizabeth Leah

    Monoclinic Nb12O29 has been synthesised by topotactic reduction of H-Nb2O5. It has a complex crystallographic shear structure made up of 3x4 blocks of corner shared NbO6 octahedra. Nb12O29 is mixed d0/d1 compound which, can be written as Nb4+2NB5+10O29. It has been found, using Rietveld refinement of powder neutron diffraction data, to undergo a charge ordering transition at around 12K resulting in a lowering of symmetry from A2/m to Am. Below this transition, one Nb4+ ion is localised on a crystallographically distinct site in the centre of the 3x4 blocks. This charge ordering transition has an associated transition to an incommensurate one dimensional antiferromagnetic state. The nature of the magnetic order has been investigated using susceptibility and SR measurements. Susceptibility measurements reveal that only 48% of the Nb4+ in the system is localised, and its temperature dependence is well fitted to a Bonner-Fisher model for S=1/2 one dimensional antiferromagnets. It is found that the remaining valence electrons in NB12O29 itinerant and contribute to its metallic conductivity. Further evidence for the unique properties of monoclinic Nb12O29 has been obtained by doping the structure with small amounts of diamagnetic Ti4+, which rapidly causes a destruction of the long range magnetic order at only 3% doping, but leaves the metallic conductivity unaffected, as is expected for a one dimensional chain.

  5. Thin film reaction of transition metals with germanium

    SciTech Connect

    Gaudet, S.; Detavernier, C.; Kellock, A.J.; Desjardins, P.; Lavoie, C.

    2006-05-15

    A systematic study of the thermally induced reaction of 20 transition metals (Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Re, Fe, Ru, Co, Rh, Ir, Ni, Pd, Pt, and Cu) with Ge substrates was carried out in order to identify appropriate contact materials in Ge-based microelectronic circuits. Thin metal films, nominally 30 nm thick, were sputter deposited on both amorphous Ge and crystalline Ge(001). Metal-Ge reactions were monitored in situ during ramp anneals at 3 deg. C s{sup -1} in an atmosphere of purified He using time-resolved x-ray diffraction, diffuse light scattering, and resistance measurements. These analyses allowed the determination of the phase formation sequence for each metal-Ge system and the identification of the most promising candidates--in terms of sheet resistance and surface roughness--for their use as first level interconnections in microelectronic circuits. A first group of metals (Ti, Zr, Hf, V, Nb, and Ta) reacted with Ge only at temperatures well above 450 deg. C and was prone to oxidation. Another set (Cr, Mo, Mn, Re, Rh, Ru, and Ir) did not form low resistivity phases (<130 {mu}{omega} cm) whereas no reaction was observed in the case of W even after annealing at up to 1000 deg. C. We found that Fe, Co, Ni, Pd, Pt, and Cu were the most interesting candidates for microelectronic applications as they reacted at relatively low temperatures (150-360 deg. C) to form low resistivity phases (22-129 {mu}{omega} cm). Among those, two monogermanides, NiGe and PdGe, exhibited the lowest resistivity values (22-30 {mu}{omega} cm) and were stable over the widest temperature window during ramp anneals. In passing, we note that Cu, Ni, and Pd were the most effective in lowering the crystallization temperature of amorphous Ge, by up to 290 deg. C for our typical ramp anneals at 3 deg. C s{sup -1}.

  6. Transition metal activation and functionalization of carbon-hydrogen bonds

    SciTech Connect

    Jones, W.D.

    1992-06-01

    We are investigating the fundamental thermodynamic and kinetic factors that influence carbon-hydrogen bond activation at homogeneous transition metal centers and the conversion of hydrocarbons into functionalized products of potential use to the chemical industry. Advances have been made in both understanding the interactions of hydrocarbons with metals and in the functionalization of hydrocarbons. We have found that RhCl(PR{sub 3}){sub 2}(CNR) complexes can catalyze the insertion of isonitriles into the C-H bonds or arenes upon photolysis. The mechanism of these reactions was found to proceed by way of initial phosphine dissociation, followed by C-H activation and isonitrile insertion. We have also examined reactions of a series of arenes with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and begun to map out the kinetic and thermodynamic preferences for arene coordination. The effects of resonance, specifically the differences in the Hueckel energies of the bound vs free ligand, are now believed to fully control the C-H activation/{eta}{sup 2}-coordination equilibria. We have begun to examine the reactions of rhodium isonitrile pyrazolylborates for alkane and arene C-H bond activation. A new, labile, carbodiimide precursor has been developed for these studies. We have completed studies of the reactions of (C{sub 5}Me{sub 5})Rh(PMe{sub 3})H{sub 2} with D{sub 2} and PMe{sub 3} that indicate that both {eta}{sup 5} {yields} {eta}{sup 3} ring slippage and metal to ring hydride migration occur more facilely than thermal reductive elimination of H{sub 2}. We have examined the reactions of heterocycles with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and found that pyrrole and furan undergo C-H or N-H activation. Thiophene, however, undergoes C-S bond oxidative addition, and the mechanism of activation has been shown to proceed through sulfur coordination prior to C-S insertion.

  7. Photoluminescence properties of Jahn-Teller transition-metal ions

    NASA Astrophysics Data System (ADS)

    Sanz-Ortiz, Marta N.; Rodríguez, Fernando

    2009-09-01

    This work investigates the influence of electron-phonon coupling associated with E ⊗e and T ⊗e Jahn-Teller (JT) effect in different transition-metal (TM) ions on de-excitation phenomena through nonradiative multiphonon relaxation, i.e., photoluminescence (PL) quenching. We developed a configurational curve model which is able to predict from the absorption spectrum whether a given JT-TM ion is PL or quenched. The prediction is made on the basis of an adapted Dexter-Klick-Russell parameter for JT systems, defined in terms of spectroscopic parameters through ΛJT=αΔeabs/Eabs, where Δeabs refers to the splitting of the parent octahedral Eg states by the JT distortion in E ⊗e (α =3/4) or T ⊗e (α =1/4), and Eabs is the energy of the first absorption band involving electronic transition between Eg and T2g. We show that PL in any JT-TM ion occurs whenever ΛJT<0.1 or is quenched if ΛJT>0.2. This result is noteworthy since it allows us to establish structural requirements for the JT-TM ion and the host crystal to be PL. Although PL properties of materials containing TM ions depend on a variety of structural factors such as the electronic configuration, the site symmetry, and the crystal field produced by neighboring atoms, the present model achieves this goal through a simple spectroscopic parameter: ΛJT. In this work we correlated the PL properties of different sixfold-coordinated JT systems such as Ti3+, Cu2+, Mn3+, Cr2+, Fe2+, Co3+, and Ni3+ in halides and oxides with ΛJT obtained from their respective absorption spectra. From this analysis we conclude that depending on the nature of the JT coupling and its strength, PL is either strongly favored or quenched in T ⊗e while it is mostly quenched in E ⊗e systems due to the larger JT distortion.

  8. Transition-Metal-Free Deacylative Cleavage of Unstrained C(sp(3))-C(sp(2)) Bonds: Cyanide-Free Access to Aryl and Aliphatic Nitriles from Ketones and Aldehydes.

    PubMed

    Ge, Jing-Jie; Yao, Chuan-Zhi; Wang, Mei-Mei; Zheng, Hong-Xing; Kang, Yan-Biao; Li, Yadong

    2016-01-15

    A transition-metal-free deacylative C(sp(3))-C(sp(2)) bond cleavage for the synthetically practical oxidative amination of ketones and aldehydes to nitriles is first described, using cheap and commercially abundant NaNO2 as the oxidant and the nitrogen source. Various nitriles bearing aryl, heteroaryl, alkyl, and alkenyl groups could be smoothly obtained from ketones and aldehydes in high yields, avoiding highly toxic cyanides or transition metals.

  9. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOEpatents

    Kostic, Nenad M.; Chen, Jian

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme.

  10. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOEpatents

    Kostic, N.M.; Chen, J.

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme. No Drawings

  11. An Alternative Approach to the Teaching of Systematic Transition Metal Chemistry.

    ERIC Educational Resources Information Center

    Hathaway, Brian

    1979-01-01

    Presents an alternative approach to teaching Systematic Transition Metal Chemistry with the transition metal chemistry skeleton features of interest. The "skeleton" is intended as a guide to predicting the chemistry of a selected compound. (Author/SA)

  12. Third row transition metal hexafluorides, extraordinary oxidizers, and Lewis acids: electron affinities, fluoride affinities, and heats of formation of WF6, ReF6, OsF6, IrF6, PtF6, and AuF6.

    PubMed

    Craciun, Raluca; Picone, Désireé; Long, Rebecca T; Li, Shenggang; Dixon, David A; Peterson, Kirk A; Christe, Karl O

    2010-02-01

    High level electronic structure calculations were used to evaluate reliable, self-consistent thermochemical data sets for the third row transition metal hexafluorides. The electron affinities, heats of formation, first (MF(6) --> MF(5) + F) and average M-F bond dissociation energies, and fluoride affinities of MF(6) (MF(6) + F(-) --> MF(7)(-)) and MF(5) (MF(5) + F(-) --> MF(6)(-)) were calculated. The electron affinities which are a direct measure for the oxidizer strength increase monotonically from WF(6) to AuF(6), with PtF(6) and AuF(6) being extremely powerful oxidizers. The inclusion of spin orbit corrections is necessary to obtain the correct qualitative order for the electron affinities. The calculated electron affinities increase with increasing atomic number, are in good agreement with the available experimental values, and are as follows: WF(6) (3.15 eV), ReF(6) (4.58 eV), OsF(6) (5.92 eV), IrF(6) (5.99 eV), PtF(6) (7.09 eV), and AuF(6) (8.20 eV). A wide range of density functional theory exchange-correlation functionals were also evaluated, and only three gave satisfactory results. The corresponding pentafluorides are extremely strong Lewis acids, with OsF(5), IrF(5), PtF(5), and AuF(5) significantly exceeding the acidity of SbF(5). The optimized geometries of the corresponding MF(7)(-) anions for W through Ir are classical MF(7)(-) anions with M-F bonds; however, for PtF(7)(-) and AuF(7)(-) non-classical anions were found with a very weak external F-F bond between an MF(6)(-) fragment and a fluorine atom. These two anions are text book examples for "superhalogens" and can serve as F atom sources under very mild conditions, explaining the ability of PtF(6) to convert NF(3) to NF(4)(+), ClF(5) to ClF(6)(+), and Xe to XeF(+) and why Bartlett failed to observe XePtF(6) as the reaction product of the PtF(6)/Xe reaction.

  13. Spin Transport in Single Layer Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Phillips, Michael; Aji, Vivek

    Inversion symmetry breaking and strong spin orbit coupling in two dimensional transition metal dichalcogenides leads to interesting new phenomena such as the valley hall and spin hall effects. The nontrivial Berry curvature of the bands yields transverse spin currents in applied field. In this talk we characterize the spin transport in hole-doped systems. Due to the large spin-splitting, time-reversal invariance, and the large separation of hole pockets in momentum space, spin flip scattering involves inter-valley processes with large momentum. As such, one expects large spin life times and a large spin hall angle. We analyze the robustness of the phenomena to various scattering processes and explore the viability of transition metal dichalcogenides for spintronic applications. We acknowledge the support of the NSF via Grant NSF DMR-1506707.

  14. [Spectroscopic studies on transition metal ions in colored diamonds].

    PubMed

    Meng, Yu-Fei; Peng, Ming-Sheng

    2004-07-01

    Transition metals like nickel, cobalt and iron have been often used as solvent catalysts in high pressure high temperature (HPHT) synthesis of diamond, and nickel and cobalt ions have been found in diamond lattice. Available studies indicated that nickel and cobalt ions could enter the lattice as interstitial or substitutional impurities and form complexes with nitrogen. Polarized microscopy, SEM-EDS, EPR, PL and FTIR have been used in this study to investigate six fancy color natural and synthetic diamonds in order to determine the spectroscopic characteristics and the existing forms of transition metal ions in colored diamond lattice. Cobalt-related optical centers were first found in natural chameleon diamonds, and some new nickel and cobalt-related optical and EPR centers have also been detected in these diamond samples.

  15. Recent Advances in Transition Metal-Catalyzed Glycosylation.

    PubMed

    McKay, Matthew J; Nguyen, Hien M

    2012-08-03

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation.

  16. Transition metal catalysis in the generation of natural gas

    SciTech Connect

    Mango, F.D.

    1995-12-31

    The view that natural gas is thermolytic, coming from decomposing organic debris, has remained almost unchallenged for nearly half a century. Disturbing contradictions exist, however: Oil is found at great depth, at temperatures where only gas should exist and oil and gas deposits show no evidence of the thermolytic debris indicative of oil decomposing to gas. Moreover, laboratory attempts to duplicate the composition of natural gas, which is typically between 60 and 95+ wt% methane in C{sub 1}-C{sub 4}, have produced insufficient amounts of methane (10 to 60%). It has been suggested that natural gas may be generated catalytically, promoted by the transition metals in carbonaceous sedimentary rocks. This talk will discuss experimental results that support this hypothesis. Various transition metals, as pure compounds and in source rocks, will be shown to generate a catalytic gas that is identical to natural gas. Kinetic results suggest robust catalytic activity under moderate catagenetic conditions.

  17. Recent Advances in Transition Metal-Catalyzed Glycosylation

    PubMed Central

    McKay, Matthew J.; Nguyen, Hien M.

    2012-01-01

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation. PMID:22924154

  18. Covalent functionalization of monolayered transition metal dichalcogenides by phase engineering.

    PubMed

    Voiry, Damien; Goswami, Anandarup; Kappera, Rajesh; e Silva, Cecilia de Carvalho Castro; Kaplan, Daniel; Fujita, Takeshi; Chen, Mingwei; Asefa, Tewodros; Chhowalla, Manish

    2015-01-01

    Chemical functionalization of low-dimensional materials such as nanotubes, nanowires and graphene leads to profound changes in their properties and is essential for solubilizing them in common solvents. Covalent attachment of functional groups is generally achieved at defect sites, which facilitate electron transfer. Here, we describe a simple and general method for covalent functionalization of two-dimensional transition metal dichalcogenide nanosheets (MoS₂, WS₂ and MoSe₂), which does not rely on defect engineering. The functionalization reaction is instead facilitated by electron transfer between the electron-rich metallic 1T phase and an organohalide reactant, resulting in functional groups that are covalently attached to the chalcogen atoms of the transition metal dichalcogenide. The attachment of functional groups leads to dramatic changes in the optoelectronic properties of the material. For example, we show that it renders the metallic 1T phase semiconducting, and gives it strong and tunable photoluminescence and gate modulation in field-effect transistors.

  19. Synthesis of quinazolines from 2-aminobenzylamines with benzylamines and N-substituted benzylamines under transition metal-free conditions.

    PubMed

    Tiwari, Abhishek R; Bhanage, Bhalchandra M

    2016-12-07

    This work reports the synthesis of quinazolines from 2-aminobenzylamines with N-substituted benzylamines in the presence of molecular iodine. The developed methodology works smoothly under transition-metal free, additive free and solvent free conditions. The use of O2 as a green oxidant makes it a greatly economical, green and sustainable protocol. Moreover, no aqueous work up is required thereby enhancing the efficiency. A series of quinazoline derivatives were synthesized successfully in good to excellent yields.

  20. Cointercalation of titanium dichalcogenides with transition metals and copper

    NASA Astrophysics Data System (ADS)

    Titov, A. A.; Titov, A. N.; Titova, S. G.; Pryanichnikov, S. V.; Chezganov, D. S.

    2017-01-01

    Cointercalated materials are studied, obtained by introducing copper into a TiSe2 lattice preintercalated with transition metals M = Mn, Fe, Co, or Ni. The analysis of the state of cointercalated systems at 950°C shows that copper reduces manganese and iron, but it is incapable of reducing cobalt or nickel. To explain the results, the values of the binding energy of hybrid states M3d/Ti3 d are compared.

  1. Zwitterionic Group VIII transition metal initiators supported by olefin ligands

    DOEpatents

    Bazan, Guillermo C.; Chen, Yaofeng

    2011-10-25

    A zwitterionic Group VIII transition metal complex containing the simple and relatively small 3-(arylimino)-but-1-en-2-olato ligand that catalyzes the formation of polypropylene and high molecular weight polyethylene. A novel feature of this catalyst is that the active species is stabilized by a chelated olefin adduct. The present invention also provides methods of polymerizing olefin monomers using zwitterionic catalysts, particularly polypropylene and high molecular weight polyethylene.

  2. Vibrational energy transfer dynamics in ruthenium polypyridine transition metal complexes.

    PubMed

    Fedoseeva, Marina; Delor, Milan; Parker, Simon C; Sazanovich, Igor V; Towrie, Michael; Parker, Anthony W; Weinstein, Julia A

    2015-01-21

    Understanding the dynamics of the initial stages of vibrational energy transfer in transition metal complexes is a challenging fundamental question which is also of crucial importance for many applications, such as improving the performance of solar devices or photocatalysis. The present study investigates vibrational energy transport in the ground and the electronic excited state of Ru(4,4'-(COOEt)2-2,2-bpy)2(NCS)2, a close relative of the efficient "N3" dye used in dye-sensitized solar cells. Using the emerging technique of ultrafast two-dimensional infrared spectroscopy, we show that, similarly to other transition-metal complexes, the central Ru heavy atom acts as a "bottleneck" making the energy transfer from small ligands with high energy vibrational stretching frequencies less favorable and thereby affecting the efficiency of vibrational energy flow in the complex. Comparison of the vibrational relaxation times in the electronic ground and excited state of Ru(4,4'-(COOEt)2-2,2-bpy)2(NCS)2 shows that it is dramatically faster in the latter. We propose to explain this observation by the intramolecular electrostatic interactions between the thiocyanate group and partially oxidised Ru metal center, which increase the degree of vibrational coupling between CN and Ru-N modes in the excited state thus reducing structural and thermodynamic barriers that slow down vibrational relaxation and energy transport in the electronic ground state. As a very similar behavior was earlier observed in another transition-metal complex, Re(4,4'-(COOEt)2-2,2'-bpy)(CO)3Cl, we suggest that this effect in vibrational energy dynamics might be common for transition-metal complexes with heavy central atoms.

  3. The chemistry and physics of transition metal clusters

    SciTech Connect

    Parks, E.K.; Jellinek, J.; Knickelbein, M.B.; Riley, S.J.

    1994-06-01

    In this program the authors study the fundamental properties of isolated clusters of transition metal atoms. Experimental studies of cluster chemistry include determination of cluster structure, reactivity, and the nature of cluster-adsorbate interactions. Studies of physical properties include measurements of cluster ionization potentials and photoabsorption cross sections. Theoretical studies focus on the structure and dynamics of clusters, including isomers, phases and phase changes, interactions with molecules, and fragmentation process.

  4. The energetics of ordered intermetallic alloys (of the transition metals)

    SciTech Connect

    Watson, R.E.; Weinert, M.; Davenport, J.W.; Fernando, G.W.; Bennett, L.H.

    1992-10-01

    The atomically ordered phases in ordered transition metal alloys are discussed. This chapter is divided into: physical parameters controlling phase stability (Hume-Rothery, structural maps, Miedema Hamiltonian), wave functions & band theory, comment on entropy terms, cohesive energies (electron promotion energies, Hund`s rule on orbital effects), structural energies/stabilities of elemental solids, total energies and atomic positions, charge transfer (Au alloys, charge tailing), heats of formation of ordered compounds.

  5. The energetics of ordered intermetallic alloys (of the transition metals)

    SciTech Connect

    Watson, R.E.; Weinert, M.; Davenport, J.W. ); Fernando, G.W. . Dept. of Physics); Bennett, L.H. . Metallurgy Div.)

    1992-01-01

    The atomically ordered phases in ordered transition metal alloys are discussed. This chapter is divided into: physical parameters controlling phase stability (Hume-Rothery, structural maps, Miedema Hamiltonian), wave functions band theory, comment on entropy terms, cohesive energies (electron promotion energies, Hund's rule on orbital effects), structural energies/stabilities of elemental solids, total energies and atomic positions, charge transfer (Au alloys, charge tailing), heats of formation of ordered compounds.

  6. Novel Transition Metal Compounds with Promising Thermoelectric Properties

    NASA Technical Reports Server (NTRS)

    Caillat, T.; Borshchevsky, A.; Fleurial, J. -P.

    1993-01-01

    Progress in the search for new high temperature thermoelectric materials at the Jet Propulsion Laboratory is reviewed. Novel transition metal compounds were selected as potential new high performance thermoelectric materials and criteria of selection are presented and discussed. Samples of these new compounds were prepared at JPL by a variety of techniques. Encouraging experimental results obtained on several of these compounds are reported and show that they have the potential to be the next generation of thermoelectric materials.

  7. Hydrogen and dihydrogen bonding of transition metal hydrides

    NASA Astrophysics Data System (ADS)

    Jacobsen, Heiko

    2008-04-01

    Intermolecular interactions between a prototypical transition metal hydride WH(CO) 2NO(PH 3) 2 and a small proton donor H 2O have been studied using DFT methodology. The hydride, nitrosyl and carbonyl ligand have been considered as site of protonation. Further, DFT-D calculations in which empirical corrections for the dispersion energy are included, have been carried out. A variety of pure and hybrid density functionals (BP86, PW91, PBE, BLYP, OLYP, B3LYP, B1PW91, PBE0, X3LYP) have been considered, and our calculations indicate the PBE functional and its hybrid variation are well suited for the calculation of transition metal hydride hydrogen and dihydrogen bonding. Dispersive interactions make up for a sizeable portion of the intermolecular interaction, and amount to 20-30% of the bond energy and to 30-40% of the bond enthalpy. An energy decomposition analysis reveals that the H⋯H bond of transition metal hydrides contains both covalent and electrostatic contributions.

  8. Generation of Hydroxyl Radicals from Dissolved Transition Metals in Surrogate Lung Fluid Solutions

    PubMed Central

    Vidrio, Edgar; Jung, Heejung; Anastasio, Cort

    2008-01-01

    Epidemiological research has linked exposure to atmospheric particulate matter (PM) to several adverse health effects, including cardiovascular and pulmonary morbidity and mortality. Despite these links, the mechanisms by which PM causes adverse health effects are poorly understood. The generation of hydroxyl radical (·OH) and other reactive oxygen species (ROS) through transition metal-mediated pathways is one of the main hypotheses for PM toxicity. In order to better understand the ability of particulate transition metals to produce ROS, we have quantified the amounts of ·OH produced from dissolved iron and copper in a cell-free, surrogate lung fluid (SLF). We also examined how two important biological molecules, citrate and ascorbate, affect the generation of ·OH by these metals. We have found that Fe(II) and Fe(III) produce little ·OH in the absence of ascorbate and citrate, but that they efficiently make ·OH in the presence of ascorbate and this is further enhanced when citrate is also added. In the presence of ascorbate, with or without citrate, the oxidation state of iron makes little difference on the amount of ·OH formed after 24 hours. In the case of Cu(II), the production of ·OH is greatly enhanced in the presence of ascorbate, but is inhibited by the addition of citrate. The mechanism for this effect is unclear, but appears to involve formation of a citrate-copper complex that is apparently less reactive than free, aquated copper in either the generation of HOOH or in the Fenton-like reaction of copper with HOOH to make ·OH. By quantifying the amount of ·OH that Fe and Cu can produce in surrogate lung fluid, we have provided a first step into being able to predict the amounts of ·OH that can be produced in the human lung from exposure to PM containing known amounts of transition metals. PMID:19148304

  9. Generation of Hydroxyl Radicals from Dissolved Transition Metals in Surrogate Lung Fluid Solutions.

    PubMed

    Vidrio, Edgar; Jung, Heejung; Anastasio, Cort

    2008-01-01

    Epidemiological research has linked exposure to atmospheric particulate matter (PM) to several adverse health effects, including cardiovascular and pulmonary morbidity and mortality. Despite these links, the mechanisms by which PM causes adverse health effects are poorly understood. The generation of hydroxyl radical (.OH) and other reactive oxygen species (ROS) through transition metal-mediated pathways is one of the main hypotheses for PM toxicity. In order to better understand the ability of particulate transition metals to produce ROS, we have quantified the amounts of .OH produced from dissolved iron and copper in a cell-free, surrogate lung fluid (SLF). We also examined how two important biological molecules, citrate and ascorbate, affect the generation of .OH by these metals. We have found that Fe(II) and Fe(III) produce little .OH in the absence of ascorbate and citrate, but that they efficiently make .OH in the presence of ascorbate and this is further enhanced when citrate is also added. In the presence of ascorbate, with or without citrate, the oxidation state of iron makes little difference on the amount of .OH formed after 24 hours. In the case of Cu(II), the production of .OH is greatly enhanced in the presence of ascorbate, but is inhibited by the addition of citrate. The mechanism for this effect is unclear, but appears to involve formation of a citrate-copper complex that is apparently less reactive than free, aquated copper in either the generation of HOOH or in the Fenton-like reaction of copper with HOOH to make .OH. By quantifying the amount of .OH that Fe and Cu can produce in surrogate lung fluid, we have provided a first step into being able to predict the amounts of .OH that can be produced in the human lung from exposure to PM containing known amounts of transition metals.

  10. Jahn-Teller effects in transition-metal compounds with small charge-transfer energy

    NASA Astrophysics Data System (ADS)

    Mizokawa, Takashi

    2013-04-01

    We have studied Jahn-Teller effects in Cs2Au2Br6, ACu3Co4O12(A=Ca or Y), and IrTe2 in which the ligand p-to-transition-metal d charge-transfer energy is small or negative. The Au+/Au3+ charge disproportionation of Cs2Au2Br6 manifests in Au 4f photoemission spectra. In Cs2Au2Br6 with negative Δ and intermediate U, the charge disproportionation can be described using effective d orbitals constructed from the Au 5d and Br 4p orbitals and is stabilized by the Jahn-Teller distortion of the Au3+ site with low-spin d8 configuration. In ACu3Co4O12, Δs for Cu3+ and Co4+ are negative and Us are very large. The Zhang-Rice picture is valid to describe the electronic state, and the valence change from Cu2+/Co4+ to Cu3+/Co3+ can be viewed as the O 2p hole transfer from Co to Cu or d9 + d6L → d9L + d6. In IrTe2, both Δ and U are small and the Ir 5d and Te 5p electrons are itinerant to form the multi-band Fermi surfaces. The ideas of band Jahn-Teller transition and Peierls transition are useful to describe the structural instabilities.

  11. Post-synthesis addition of transition metal ions and lanthanide ions to the surface of anatase titanium (IV) dioxide nanorods

    NASA Astrophysics Data System (ADS)

    Balasanthiran, Choumini

    Solar energy utilization is an attractive option for new energy technology and economic development. Our research is the formulation of catalyst materials for solar production of hydrogen from water. Titanium(IV) oxide has been explored for water splitting; however, a major challenge is that titanium(IV) oxide can only absorb UV light. Visible light absorption can be increased by metal ion or anion doping by creating interband states. Most dopant protocols lead to deposition of dopant ions throughout the solid, and interfacial deposition has received very little attention. We have developed a method to selectively attach transition metal ions and lanthanide ions on the surface of titanium(IV) oxide nanorods using metal chlorides as precursors. The present study demonstrates that Cr(III), Mn(II), Fe(II), Co(II), Ni(II), Cu (II), Eu(III), Ce(III), Pr(III) and Er(III) were coordinated to the surface of oleic acid capped TiO2 nanorods (NRs) by post-synthesis method without any phase or morphology transformation. Metal ion loading could be carefully controlled, and we show a titration curve for addition of transition metal ions and Eu(III) to the nanorod surface. The materials were characterized with UV-visible spectroscopy, transmission electron microscopy, elemental analysis, XPS and powder X-ray diffraction. X-ray photoelectron spectra were obtained for a series of M-TiO2 samples in which transition metal (M = Cr, Mn, Fe, Co, Ni, Cu) ions are directly attached to the surface of anatase TiO2 nanocrystals. Further, we report sequential, quantitative loading of transition metal ions (Cr, Mn, Fe, Co, Ni, Cu) to the surface of rod-shape anatase TiO2 nanocrystals in bimetallic combinations (6C2 = 15). TEM, PXRD, UV-Vis, XPS and elemental analysis characterization show that bimetallic combinations were synthesized successfully.

  12. Transition metal complexes of phyllobilins – a new realm of bioinorganic chemistry

    PubMed Central

    Li, Chengjie

    2015-01-01

    Natural cyclic tetrapyrroles feature outstanding capacity for binding transition metal ions, furnishing Nature with the important metallo-porphyrinoid ‘Pigments of Life’, such as heme, chlorophyll (Chl) and vitamin B12. In contrast, linear tetrapyrroles are not generally ascribed a biologically relevant ability for metal-binding. Indeed, when heme or Chl are degraded to natural linear tetrapyrroles, their central Fe- or Mg-ions are set free. Some linear tetrapyrroles are, however, effective multi-dentate ligands and their transition metal complexes have remarkable chemical properties. The focus of this short review is centred on such complexes of the linear tetrapyrroles derived from natural Chl-breakdown, called phyllobilins. These natural bilin-type compounds are massively produced in Nature and in highly visible processes. Colourless non-fluorescing Chl-catabolites (NCCs) and the related dioxobilin-type NCCs, which typically accumulate in leaves as ‘final’ products of Chl-breakdown, show low affinity for transition metal-ions. However, NCCs are oxidized in leaves to give less saturated coloured phyllobilins, such as yellow or pink Chl-catabolites (YCCs or PiCCs). YCCs and PiCCs are ligands for various biologically relevant transition metal-ions, such as Zn(ii)-, Ni(ii)- and Cu(ii)-ions. Complexation of Zn(ii)- and Cd(ii)-ions by the effectively tridentate PiCC produces blue metal-complexes that exhibit an intense red fluorescence, thus providing a tool for the sensitive detection of these metal ions. Outlined here are fundamental aspects of structure and metal coordination of phyllobilins, including a comparison with the corresponding properties of bilins. This knowledge may be valuable in the quest of finding possible biological roles of the phyllobilins. Thanks to their capacity for metal-ion coordination, phyllobilins could, e.g., be involved in heavy-metal transport and detoxification, and some of their metal-complexes could act as sensitizers for

  13. Thermoelectric material including a multiple transition metal-doped type I clathrate crystal structure

    DOEpatents

    Yang, Jihui [Lakeshore, CA; Shi, Xun [Troy, MI; Bai, Shengqiang [Shanghai, CN; Zhang, Wenqing [Shanghai, CN; Chen, Lidong [Shanghai, CN; Yang, Jiong [Shanghai, CN

    2012-01-17

    A thermoelectric material includes a multiple transition metal-doped type I clathrate crystal structure having the formula A.sub.8TM.sub.y.sub.1.sup.1TM.sub.y.sub.2.sup.2 . . . TM.sub.y.sub.n.sup.nM.sub.zX.sub.46-y.sub.1.sub.-y.sub.2.sub.- . . . -y.sub.n.sub.-z. In the formula, A is selected from the group consisting of barium, strontium, and europium; X is selected from the group consisting of silicon, germanium, and tin; M is selected from the group consisting of aluminum, gallium, and indium; TM.sup.1, TM.sup.2, and TM.sup.n are independently selected from the group consisting of 3d, 4d, and 5d transition metals; and y.sub.1, y.sub.2, y.sub.n and Z are actual compositions of TM.sup.1, TM.sup.2, TM.sup.n, and M, respectively. The actual compositions are based upon nominal compositions derived from the following equation: z=8q.sub.A-|.DELTA.q.sub.1|y.sub.1-|.DELTA.q.sub.2|y.sub.2- . . . -|.DELTA.q.sub.n|y.sub.n, wherein q.sub.A is a charge state of A, and wherein .DELTA.q.sub.1, .DELTA.q.sub.2, .DELTA.q.sub.n are, respectively, the nominal charge state of the first, second, and n-th TM.

  14. Estimating the acidity of transition metal hydride and dihydrogen complexes by adding ligand acidity constants.

    PubMed

    Morris, Robert H

    2014-02-05

    A simple equation (pKa(THF) = ∑AL + Ccharge + Cnd + Cd6) can be used to obtain an estimate of the pKa of diamagnetic transition metal hydride and dihydrogen complexes in tetrahydrofuran, and, by use of conversion equations, in other solvents. It involves adding acidity constants AL for each of the ligands in the 5-, 6-, 7-, or 8-coordinate conjugate base complex of the hydride or dihydrogen complex along with a correction for the charge (Ccharge = -15, 0 or 30 for x = +1, 0 or -1 charge, respectively) and the periodic row of the transition metal (Cnd = 0 for 3d or 4d metal, 2 for 5d metal) as well as a correction for d(6) octahedral acids (Cd6 = 6 for d(6) metal ion in the acid, 0 for others) that are not dihydrogen complexes. Constants AL are provided for 13 commonly occurring ligand types; of these, nine neutral ligands are correlated with Lever's electrochemical ligand parameters EL. This method gives good estimates of the over 170 literature pKa values that range from less than zero to 50 with a standard deviation of 3 pKa units for complexes of the metals chromium to nickel, molybdenum, ruthenium to palladium, and tungsten to platinum in the periodic table. This approach allows a quick assessment of the acidity of hydride complexes found in nature (e.g., hydrogenases) and in industry (e.g., catalysis and hydrogen energy applications). The pKa values calculated for acids that have bulky or large bite angle chelating ligands deviate the most from this correlation. The method also provides an estimate of the base strength of the deprotonated form of the complex.

  15. Second harmonic generation in nanoscale films of transition metal chalcogenides: Taking into account multibeam interference

    NASA Astrophysics Data System (ADS)

    Lavrov, S. D.; Kudryavtsev, A. V.; Shestakova, A. P.; Kulyuk, L.; Mishina, E. D.

    2016-05-01

    Second harmonic generation is studied in structures containing nanoscale layers of transition metal chalcogenides that are two-dimensional semiconductors and deposited on a SiO2/Si substrate. The second harmonic generation intensity is calculated with allowance for multibeam interference in layers of dichalcogenide and silicon oxide. The coefficient of reflection from the SiO2-layer-based Fabry-Perot cavity is subsequently calculated for pump wave fields initiating nonlinear polarization at every point of dichalcogenide, which is followed by integration of all second harmonic waves generated by this polarization. Calculated second harmonic intensities are presented as functions of dichalcogenide and silicon oxide layer thicknesses. The dependence of the second harmonic intensity on the MoS2 layer thickness is studied experimentally in the layer of 2-140 nm. A good coincidence of the experimental data and numerical simulation results has been obtained.

  16. Bioavailable transition metals in particulate matter mediate cardiopulmonary injury in healthy and compromised animal models.

    PubMed Central

    Costa, D L; Dreher, K L

    1997-01-01

    Many epidemiologic reports associate ambient levels of particulate matter (PM) with human mortality and morbidity, particularly in people with preexisting cardiopulmonary disease (e.g., chronic obstructive pulmonary disease, infection, asthma). Because much ambient PM is derived from combustion sources, we tested the hypothesis that the health effects of PM arise from anthropogenic PM that contains bioavailable transition metals. The PM samples studied derived from three emission sources (two oil and one coal fly ash) and four ambient airsheds (St. Louis, MO; Washington; Dusseldorf, Germany; and Ottawa, Canada). PM was administered to rats by intratracheal instillation in equimass or equimetal doses to address directly the influence of PM mass versus metal content on acute lung injury and inflammation. Our results indicated that the lung dose of bioavailable transition metal, not instilled PM mass, was the primary determinant of the acute inflammatory response for both the combustion source and ambient PM samples. Residual oil fly ash, a combustion PM rich in bioavailable metal, was evaluated in a rat model of cardiopulmonary disease (pulmonary vasculitis/hypertension) to ascertain whether the disease state augmented sensitivity to that PM. Significant mortality and enhanced airway responsiveness were observed. Analysis of the lavaged lung fluids suggested that the milieu of the inflamed lung amplified metal-mediated oxidant chemistry to jeopardize the compromised cardiopulmonary system. We propose that soluble metals from PM mediate the array of PM-associated injuries to the cardiopulmonary system of the healthy and at-risk compromised host. PMID:9400700

  17. Computing pK(A) values of hexa-aqua transition metal complexes.

    PubMed

    Galstyan, Gegham; Knapp, Ernst-Walter

    2015-01-15

    Aqueous pKA values for 15 hexa-aqua transition metal complexes were computed using a combination of quantum chemical and electrostatic methods. Two different structure models were considered optimizing the isolated complexes in vacuum or in presence of explicit solvent using a QM/MM approach. They yield very good agreement with experimentally measured pKA values with an overall root mean square deviation of about 1 pH unit, excluding a single but different outlier for each of the two structure models. These outliers are hexa-aqua Cr(III) for the vacuum and hexa-aqua Mn(III) for the QM/MM structure model. Reasons leading to the deviations of the outlier complexes are partially explained. Compared to previous approaches from the same lab the precision of the method was systematically improved as discussed in this study. The refined methods to obtain the appropriate geometries of the complexes, developed in this work, may allow also the computation of accurate pKA values for multicore transition metal complexes in different oxidation states.

  18. Understanding the Enhanced Catalytic Performance of Ultrafine Transition Metal Nanoparticles-Graphene Composites

    NASA Astrophysics Data System (ADS)

    Liu, Xin; Meng, Changgong; Han, Yu

    2015-09-01

    Catalysis, as the key to minimize the energy requirement and environmental impact of today's chemical industry, plays a vital role in many fields directly related to our daily life and economy, including energy generation, environment control, manufacture of chemicals, medicine synthesis, etc. Rational design and fabrication of highly efficient catalysts have become the ultimate goal of today's catalysis research. For the purpose of handling and product separation, heterogeneous catalysts are highly preferred for industrial applications and a large part of which are the composites of transition metal nanoparticles (TMNPs). With the fast development of nanoscience and nanotechnology and assisted with theoretical investigations, basic understanding on tailoring the electronic structure of these nanocomposites has been gained, mainly by precise control of the composition, morphology, interfacial structure and electronic states. With the rise of graphene, chemical routes to prepare graphene were developed and various graphene-based composites were fabricated. Transition metal nanoparticles-reduced graphene oxide (TMNPs-rGO) composites have attracted considerable attention, because of their intriguing catalytic performance which have been extensively explored for energy- and environment-related applications to date. This review summarizes our recent experimental and theoretical efforts on understanding the superior catalytic performance of subnanosized TMNPs-rGO composites.

  19. The recent development of efficient Earth-abundant transition-metal nanocatalysts.

    PubMed

    Wang, Dong; Astruc, Didier

    2017-02-06

    Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

  20. Chemistry of guanidinate-stabilised diboranes: transition-metal-catalysed dehydrocoupling and hydride abstraction.

    PubMed

    Wagner, Arne; Litters, Sebastian; Elias, Jana; Kaifer, Elisabeth; Himmel, Hans-Jörg

    2014-09-22

    Herein, we analyse the catalytic boron-boron dehydrocoupling reaction that leads from the base-stabilised diborane(6) [H2 B(hpp)]2 (hpp=1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidinate) to the base-stabilised diborane(4) [H2 B(hpp)]2 . A number of potential transition-metal precatalysts was studied, including transition-metal complexes of the product diborane(4). The synthesis and structural characterisation of two further examples of such complexes is presented. The best results for the dehydrocoupling reactions were obtained with precatalysts of Group 9 metals in the oxidation state of +I. The active catalyst is formed in situ through a multistep process that involves reduction of the precatalyst by the substrate [H2 B(hpp)]2 , and mechanistic investigations indicate that both heterogeneous and (slower) homogeneous reaction pathways play a role in the dehydrocoupling reaction. In addition, hydride abstraction from [H2 B(hpp)]2 and related diboranes is analysed and the possibility for subsequent deprotonation is discussed by probing the protic character of the cationic boron-hydrogen compounds with NMR spectroscopic analysis.