Science.gov

Sample records for 5l x70 em

  1. Influence of Ti addition on the hydrogen induced cracking of API 5L X70 hot-rolled pipeline steel in acid sour media

    NASA Astrophysics Data System (ADS)

    Moon, Joonoh; Park, Chulbong; Kim, Seong-Ju

    2012-08-01

    In this study, Hydrogen Induced Cracking (HIC) testing of high strength API 5L grade X70 linepipe hot rolled steel containing Ti was performed to investigate the effects of (Nb, Ti, V)(C, N) particles on HIC susceptibility. By controlling chemical composition and hot rolling parameters, experimental steel with Bainitic ferrite and Bainite microstructures was fabricated. HIC testing was carried out within an acidic condition (pH=2.7±0.1) according to NACE standards with test results showing cracking propagated along coarse (Nb, Ti, V)(C, N) particles at mid-thickness. This is mainly due to centerline segregation and hydrogen blistering between matrix and coarse (Nb, Ti, V)(C, N) particles without external stress.

  2. Pitting Initiation and Propagation of X70 Pipeline Steel Exposed to Chloride-Containing Environments

    PubMed Central

    Yang, Zixuan; Kan, Bo; Li, Jinxu; Su, Yanjing; Qiao, Lijie; Volinsky, Alex A.

    2017-01-01

    Inclusion-induced pitting initiation mechanisms in X70 steel were investigated by scanning electron microscopy, scanning Kelvin probe force microscopy (SKPFM), immersion and electrochemical polarization tests in chloride-containing ion solutions. There are three inclusion types in the X70 steel. Corrosion test results indicated that pitting corrosion resistance of type A inclusion < type C inclusion < type B inclusion, i.e., (Mn, Ca)S < matrix < (Al, Ca)O. SKPFM test results show that the type A inclusion exhibited both lower and higher potentials than the matrix, while the type B inclusion exhibited higher potential than the matrix. The corrosion test and the SKPFM potential test results are consistent. Potentiodynamic polarization results indicate that the type A and C are active inclusions, while the type B is an inactive inclusion. Three kinds of possible mechanisms of inclusion-induced pitting corrosion are established for the X70 steel. PMID:28902156

  3. Investigating the effect of heat treatment on hydrogen permeation behavior of API X-70 steel

    NASA Astrophysics Data System (ADS)

    Shirband, Zeynab; Shishesaz, Mohammad Reza; Ashrafi, Ali

    2012-06-01

    Pipeline steels absorb different amounts of hydrogen during transportation of sour oil and gas. Since hydrogen-related damages such as hydrogen-induced cracking are strongly affected by hydrogen permeation behavior of steels, the purpose of this study determined to investigate hydrogen permeation behavior in API X-70 pipeline steel using electrochemical permeation method. The effect of heat treatment was also considered. It was found that hydrogen diffusivity increased by annealing the X-70 and it was decreased by normalizing. The condition was reverse for hydrogen apparent solubility. Finally, it was concluded that change in hydrogen diffusivity can be attributed to changes in grain size due to heat treatment.

  4. Effect of different microstructural parameters on hydrogen induced cracking in an API X70 pipeline steel

    NASA Astrophysics Data System (ADS)

    Mohtadi-Bonab, M. A.; Eskandari, M.; Karimdadashi, R.; Szpunar, J. A.

    2017-07-01

    In this study, the surface and cross section of an as-received API X70 pipeline steel was studied by SEM and EDS techniques in order to categorize the shape and morphology of inclusions. Then, an electrochemical hydrogen charging using a mixed solution of 0.2 M sulfuric acid and 3 g/l ammonium thiocyanate has been utilized to create hydrogen cracks in X70 steel. After hydrogen charging experiments, the cross section of this steel has been accurately checked by SEM in order to find out hydrogen cracks. The region of hydrogen cracks was investigated by SEM and EBSD techniques to predict the role of different microstructural parameters involving hydrogen induced cracking (HIC) phenomenon. The results showed that inclusions were randomly distributed in the cross section of tested specimens. Moreover, different types of inclusions in as-received X70 steel were found. However, only inclusions which were hard, brittle and incoherent with the metal matrix, such as manganese sulfide and carbonitride precipitates, were recognized to be harmful to HIC phenomenon. Moreover, HIC cracks propagate dominantly in transgraular manner through differently oriented grains with no clear preferential trend. Moreover, a different type of HIC crack with about 15-20 degrees of deviation from the rolling direction was found and studied by EBSD technique and role of micro-texture parameters on HIC was discussed.

  5. F-5-L Boat Seaplane : performance characteristics

    NASA Technical Reports Server (NTRS)

    Diehl, W S

    1922-01-01

    Performance characteristics for the F-5-L Boat Seaplane are given. Characteristic curves for the RAF-6 airfoil and the F-5-L wings, parasite resistance and velocity data, engine and propeller characteristics, effective and maximum horsepower, and cruising performance are discussed.

  6. Stress Corrosion Cracking of Welded API X70 Pipeline Steel in Simulated Underground Water

    NASA Astrophysics Data System (ADS)

    Liu, Z. Y.; Du, C. W.; Li, C.; Wang, F. M.; Li, X. G.

    2013-09-01

    This paper investigates the stress corrosion cracking (SCC) behavior of welded API X70 pipeline steel in simulated underground water using the slow strain rate test, fractographic characterization by scanning electron microscopy, and potentiodynamic polarization techniques. SCC susceptibility of the heat-affected zone (HAZ) is demonstrated to be dependent on two factors: the effect of the microstructure in the HAZ on electrochemical reactions and the effect of the mechanical property on SCC occurrence. Electrochemical experiments indicate that the microstructures in the HAZ, especially the softened microstructure, can significantly facilitate the processes of hydrogen evolution when cathodic potential is positive to -1050 mVSCE. However, when the cathodic potential is below -1050 mVSCE, the cathode current densities of different microstructures are close to one another and greatly increase because of the decrease of the applied potentials. The SCC behavior is consistent with the electrochemical results. Under -650 and -850 mVSCE, SCC is most likely to occur in the softened region, and under -1200 mVSCE, SCC occurs in both the softened and hardened regions.

  7. Electrochemical Behavior and Stress Corrosion Sensitivity of X70 Steel Under Disbonded Coatings in Korla Soil Solution

    NASA Astrophysics Data System (ADS)

    Qian, Hongchang; Wang, Luntao; Wang, Huiru; Zheng, Wenru; Zhang, Dawei; Du, Cuiwei

    2016-11-01

    The corrosion of X70 pipeline steel under a model disbonded coating was studied in a simulated solution of Korla soil by combining in situ electrochemical measurements at different locations in the crevice and stress corrosion cracking (SCC) sensitivity analyses in the corresponding simulated environments. The results from electrochemical impedance spectroscopy showed that the corrosion product resistance R t and charge transfer resistance R ct of X70 steel first increased and then decreased with increasing distance from the opening of the crevice in the disbonded coating. Scanning electron micrographs showed that pitting in the crevice became more severe at deeper locations in the crevice. Slow strain rate tests showed that the lowest SCC sensitivity of X70 steel was found at 15 cm away from the opening, and the highest SCC sensitivity was at the end of the crevice.

  8. The Effect of Chemical Composition on Microstructure and Properties of Intercritically Reheated Coarse-Grained Heat-Affected Zone in X70 Steels

    NASA Astrophysics Data System (ADS)

    Zhu, Zhixiong; Kuzmikova, Lenka; Li, Huijun; Barbaro, Frank

    2013-12-01

    The current study investigates the effect of different levels of Ti, N, and Ti/N ratios on microstructure and properties in the intercritically reheated coarse-grained heat-affected zone (ICCGHAZ) of two-pass submerged arc welds in API 5L grade X70 pipe. Gleeble simulation was employed to reproduce the ICCGHAZ of actual welds. Hardness and Charpy V-notch (CVN) tests were performed on the simulated samples. The microstructure of simulated ICCGHAZ was characterized by optical microscopy and scanning electron microscopy (SEM). LePera color etching technique was employed to identify and quantify the martensitic-austenitic (M-A) constituent. Results show that the simulated ICCGHAZ exhibited extremely low toughness, but in the studied range of Ti and N, there was no correlation with Ti/N ratio. The beneficial effect of near-stoichiometric Ti/N ratio observed in coarse-grained heat-affected zone (CGHAZ) did not translate to ICCGHAZ. This was because of the negative effect of the blocky M-A constituent formed on prior austenite grain boundaries.

  9. Influence of crystallographic texture in X70 pipeline steels on toughness anisotropy and delamination

    NASA Astrophysics Data System (ADS)

    Al-Jabr, Haytham M.

    The effects of microstructure and crystallographic texture in four commercially-produced API X70 pipeline steels and their relation to planar anisotropy of toughness and delamination were evaluated. The experimental steels were processed through either a hot strip mill, a Steckel mill, or a compact strip mill. Different processing routes were selected to obtain plates with potential variations in the microstructure and anisotropic characteristics. Tensile and Charpy impact testing were used to evaluate the mechanical properties in three orientations: longitudinal (L), transverse (T) and diagonal (D) with respect to the rolling direction to evaluate mechanical property anisotropy. The yield and tensile strengths were higher in the T orientation and toughness was lower in the D orientation for all plates. Delamination was observed in some of the ductile fracture surfaces of the impact samples. To further study the splitting behavior and effects on impact toughness, a modified impact test (MCVN) specimen with side grooves was designed to intensify induced stresses parallel to the notch root and thus facilitate evaluation of delamination. Scanning electron microscopy combined with electron backscattered diffraction (EBSD) were used to evaluate the grain size, microstructural constituents, and crystallographic texture to determine the factors leading to delamination and the anisotropy in toughness. The ferrite grain size is mainly responsible for the differences in DBTTs between the L and T orientations. The higher DBTT in the D orientation observed in pipeline steels is attributed to crystallographic texture. The higher DBTT in the D direction is due to the higher volume fraction of grains having their {100} planes parallel or close to the primary fracture plane for the D orientation. An equation based on a new "brittleness parameter," based on an assessment of grain orientations based on EBSD data, was developed to predict the changes in DBTTs with respect to sample

  10. Mechanical and Metallurgical Properties of Grade X70 Steel Linepipe Produced by Non-conventional Heat Treatment

    NASA Astrophysics Data System (ADS)

    Natividad, C.; García, R.; López, V. H.; Falcón, L. A.; Salazar, M.

    A nonconventional heat treatment in API X70 steel samples was carried out by heating the steel up to 1050 °C and holding for 30 min at this temperature. Subsequently, the samples were cooled in water and air. There has been recently a growing demand for higher-grade linepipes that can help to reduce the total cost of long linepipes. The application of high-strength linepipes such as API X70 and X80 grades has been increasing in recent years. The use of high-strength linepipe steels improves the efficiency of transportation by enabling large volumes under high internal pressure. Increasing yield strength and therefore thinner wall thickness enable the industry to reduce the costs of all components through the limitation of string weight. In this work, an API X70 has been developed through nonconventional heat treatment to create the suitable microstructure (acicular ferrite) which provides good toughness and sour service properties due to the bainite obtained in the microstructure. To assess the effect of the heat treatment, mechanical properties were evaluated. These results were related with the microstructures and precipitate distribution in the steel.

  11. Static Recrystallized Grain Size of Coarse-Grained Austenite in an API-X70 Pipeline Steel

    NASA Astrophysics Data System (ADS)

    Sha, Qingyun; Li, Guiyan; Li, Dahang

    2013-12-01

    The effects of initial grain size and strain on the static recrystallized grain size of coarse-grained austenite in an API-X70 steel microalloyed with Nb, V, and Ti were investigated using a Gleeble-3800 thermomechanical simulator. The results indicate that the static recrystallized grain size of coarse-grained austenite decreases with decreasing initial grain size and increasing applied strain. The addition of microalloying elements can lead to a smaller initial grain size for hot deformation due to the grain growth inhibition during reheating, resulting in decreasing of static recrystallized grain size. Based on the experimental data, an equation for the static recrystallized grain size was derived using the least square method. The grain sizes calculated using this equation fit well with the measured ones compared with the equations for fine-grained austenite and for coarse-grained austenite of Nb-V microalloyed steel.

  12. Anodic Dissolution Behavior of the Crack Tip of X70 Pipeline Steel in Near-Neutral pH Environment

    NASA Astrophysics Data System (ADS)

    Cui, Zhongyu; Wang, Liwei; Liu, Zhiyong; Du, Cuiwei; Li, Xiaogang; Wang, Xin

    2016-12-01

    In this work, the anodic dissolution behavior of the fresh metal surface at crack tip of X70 steel in near-neutral pH environment was investigated using galvanic corrosion simulation method. The solution environment, strain, strain rate, hydrogen enrichment, and fresh metal surface at the crack tip were considered. Corrosion current of the specimen during fast stretching increased linearly with plastic strain. The increment and increase rate of the corrosion current during plastic deformation stage were dependent on the strain rate. Combining Faraday's law and crack tip strain rate equation, the crack growth rate (CGR) induced by the anodic dissolution of the fresh metal surface was calculated. Results show that CGR caused by anodic dissolution was roughly one order lower than that measured on the compact tensile specimen under cyclic load. This finding indicated that hydrogen embrittlement may play a dominate role in stress corrosion crack propagation of pipeline steels in near-neutral pH environment.

  13. Effect of Hyperbaric Chamber Gas on Transformation Texture of the API-X70 Pipeline Weld Metal

    NASA Astrophysics Data System (ADS)

    Azar, Amin S.; Østby, Erling; Akselsen, Odd M.

    2012-09-01

    The development of the texture components in the X70 weld metal under several shielding environments was investigated using the electron-backscattered diffraction (EBSD) and orientation imaging microscopy (OIM) techniques. A new method for assigning the reference direction (RD), transverse direction (TD), and normal direction (ND) was introduced based on the morphological orientation of the grains. The analyses showed that different shielding gases affect the weld metal texture and microstructure. The shielding environment with pure argon shows the highest orientational pole density values and dominant acicular ferrite microstructure. It was observed that the distribution of misorientation angle and special coincidence site lattice (CSL) grain boundaries play significant roles in determining the tensile characteristics of the weld samples. Moreover, the bainite lattice orientation was found dependent on the directional heat flow unlike the other detected constituents.

  14. Effects of Heat-Affected Zone Microstructure on Fracture Toughness of Two X70 Pipe Girth Welds

    NASA Astrophysics Data System (ADS)

    Park, Dong-Yeob; Amirkhiz, Babak Shalchi; Gravel, Jean-Philippe; Wang, Yiyu; Li, Leijun; Zavadil, Renata; Liang, Jie; Liu, Pei; He, Anqiang; Arafin, Muhammad

    2017-07-01

    In the previous study, unstable brittle crack extensions were observed during ductile tearing from all the single-edge notched bend [SE(B)] specimens with an initial crack placed in heat-affected zone (HAZ), machined from one of the two studied X70 pipe girth welds, performed at 258 K (-15 °C). Thus their microstructures and properties have been investigated using optical microscopy, microhardness measurement, and advanced scanning electron microscopy and transmission electron microscopy so as to (1) characterize their metallographic properties including crystallographic texture and (2) correlate them with the unstable brittle crack occurrence and propagation. The results suggest that HAZ softening—strength loss—is a major factor responsible for the cleavage occurrence in the given HAZ specimens as it could induce a large local strain concentration by limiting plasticity in base metal when a ductile crack crosses from the HAZ to the base metal. The HAZ softening seems to be associated with the disappearance of pearlite packets in the HAZ region, which presumably occurred during welding, for the given material. High angle grain boundaries in the fine-grained HAZ appear to affect the direction of cleavage propagation at the point of cleavage initiation ( i.e., pop-in).

  15. Effects of Molybdenum and Vanadium Addition on Tensile and Charpy Impact Properties of API X70 Linepipe Steels

    NASA Astrophysics Data System (ADS)

    Kim, Young Min; Shin, Sang Yong; Lee, Hakcheol; Hwang, Byoungchul; Lee, Sunghak; Kim, Nack J.

    2007-08-01

    This study is concerned with the effects of V and Mo addition on tensile and Charpy impact properties of API X70 linepipe steels. Twelve kinds of steel specimens were produced by varying V and Mo additions and rolling conditions. The addition of V and Mo promoted the formation of acicular ferrite (AF), banitic ferrite (BF), and martensite-austenite (MA) constituents, while suppressing the formation of polygonal ferrite (PF) or pearlite (P). The tensile test results indicated that the tensile strength of the specimens rolled in the two-phase region increased with the addition of V and Mo, while the yield strength did not vary much in these specimens except the water-cooled specimens, which showed the increased yield strength with addition of Mo. The tensile strength of specimens rolled in the single-phase region followed by water cooling increased with increasing V and Mo contents. The yield strength, however, did not vary much with increasing V content or with addition of Mo to the low-V alloy. In these specimens, a substantial increase in the strengths was achieved only when Mo was added to the high-V alloy. The specimens rolled in the single-phase region had higher upper-shelf energy (USE) and lower ductile-brittle transition temperature (DBTT) than the specimens rolled in the two-phase region, because their microstructures were composed of AF and fine PF. According to the electron backscatter diffraction (EBSD) analysis data, the effective grain size in AF was determined by crystallographic packets composed of a few fine grains having similar orientations. Thus, the decreased DBTT in the specimens rolled in the single-phase region could be explained by the decrease in the overall effective grain size due to the presence of AF having smaller effective grain size.

  16. Effect of pH Value on the Electrochemical and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in the Dilute Bicarbonate Solutions

    NASA Astrophysics Data System (ADS)

    Cui, Z. Y.; Liu, Z. Y.; Wang, L. W.; Ma, H. C.; Du, C. W.; Li, X. G.; Wang, X.

    2015-11-01

    In this work, effects of pH value on the electrochemical and stress corrosion cracking (SCC) behavior of X70 pipeline steel in the dilute bicarbonate solutions were investigated using electrochemical measurements, slow strain rate tensile tests and surface analysis techniques. Decrease of the solution pH from 6.8 to 6.0 promotes the anodic dissolution and cathodic reduction simultaneously. Further decrease of the pH value mainly accelerates the cathodic reduction of X70 pipeline steel. As a result, when the solution pH decreases form 6.8 to 5.5, SCC susceptibility decreases because of the enhancement of the anodic dissolution. When the solution pH decreases from 5.5 to 4.0, SCC susceptibility increases gradually because of the acceleration of cathodic reactions.

  17. Homopolar pulse welding of API 5L carbon steel linepipe

    SciTech Connect

    Haase, P.; Carnes, R.; Harville, M.

    1994-12-31

    Homopolar pulse welding (HPW) is a resistance welding process being investigated as a method to rapidly join API 5L carbon steel linepipe. The target application for this investigation is deepwater offshore pipeline construction utilizing the J-lay method, which requires a rapid one-shot welding process for economic feasibility. HPW utilizes the high current, low-voltage pulse produced by a homopolar generator to rapidly resistance heat the interface between abutting workpieces, and follows that pulse with an upset action to produce a weld. A large number of controllable parameters affecting the quality of the resultant weld are present in the process. Three inch nominal diameter, schedule 160 API 5L X-52 pipe sections were welded in this series while controlling variations in generator discharge speed electrode location and upsetting parameters. Welding current voltage and temperature curves were recorded for the welds. Tensile and Charpy V-notch impact specimens were machined from each weld and tested. Weld cross-sections were macroscopically examined. By delaying the application of the forging action, the `white line` or decarburized zone commonly found in high frequency resistance or flash butt welds was eliminated. Weld tensile strength was found to be primarily dependent on generator discharge speed (heat input). Electrode distance from the weld interface was found to be the critical factor determining weld zone cooling rate. HPW parameters can be selected to produce welds without the `white line` or decarburized zone commonly found in high frequency resistance and flash butt welds. Full tensile strength welds are easily achieved providing two conditions are met: sufficient heat input is supplied and a nominal upsetting action is applied within a few seconds of the discharge current peak. Electrode location provides control over the weld zone cooling rate.

  18. Fracture-Toughness Analysis in Transition-Temperature Region of Three American Petroleum Institute X70 and X80 Pipeline Steels

    NASA Astrophysics Data System (ADS)

    Shin, Sang Yong; Woo, Kuk Je; Hwang, Byoungchul; Kim, Sangho; Lee, Sunghak

    2009-04-01

    The fracture toughness in the transition-temperature region of three American Petroleum Institute (API) X70 and X80 pipeline steels was analyzed in accordance with the American Society for Testing and Materials (ASTM) E1921-05 standard test method. The elastic-plastic cleavage fracture toughness ( K Jc ) was determined by three-point bend tests, using precracked Charpy V-notch (PCVN) specimens; the measured K Jc values were then interpreted by the three-parameter Weibull distribution. The fracture-toughness test results indicated that the master curve and the 98 pct confidence curves explained the variation in the measured fracture toughness well. The reference temperatures obtained from the fracture-toughness test and index temperatures obtained from the Charpy impact test were lowest in the X70 steel rolled in the two-phase region, because this steel had smaller effective grains and the lowest volume fraction of hard phases. In this steel, few hard phases led to a higher resistance to cleavage crack initiation, and the smaller effective grain size led to a higher possibility of crack arrest, thereby resulting in the best overall fracture properties. Measured reference temperatures were then comparatively analyzed with the index temperatures obtained from the Charpy impact test, and the effects of microstructures on these temperatures were discussed.

  19. Research on Soft Reduction Amount Distribution to Eliminate Typical Inter-dendritic Crack in Continuous Casting Slab of X70 Pipeline Steel by Numerical Model

    NASA Astrophysics Data System (ADS)

    Liu, Ke; Wang, Chang; Liu, Guo-liang; Ding, Ning; Sun, Qi-song; Tian, Zhi-hong

    2017-04-01

    To investigate the formation of one kind of typical inter-dendritic crack around triple point region in continuous casting(CC) slab during the operation of soft reduction, fully coupled 3D thermo-mechanical finite element models was developed, also plant trials were carried out in a domestic continuous casting machine. Three possible types of soft reduction amount distribution (SRAD) in the soft reduction region were analyzed. The relationship between the typical inter-dendritic cracks and soft reduction conditions is presented and demonstrated in production practice. Considering the critical strain of internal crack formation, a critical tolerance for the soft reduction amount distribution and related casing parameters have been proposed for better contribution of soft reduction to the internal quality of slabs. The typical inter-dendritic crack around the triple point region had been eliminated effectively through the application of proposed suggestions for continuous casting of X70 pipeline steel in industrial practice.

  20. Evolution of weld metal microstructure in shielded metal arc welding of X70 HSLA steel with cellulosic electrodes: A case study

    SciTech Connect

    Ghomashchi, Reza Costin, Walter; Kurji, Rahim

    2015-09-15

    The microstructure of weld joint in X70 line pipe steel resulted from shielded metal arc welding with E6010 cellulosic electrodes is characterized using optical and electron microscopy. A range of ferritic morphologies have been identified ranging from polygonal inter- and intra-prior austenite grains allotriomorphic, idiomorphic ferrites to Widmanstätten, acicular and bainitic ferrites. Electron Backscatter Diffraction (EBSD) analysis using Image Quality (IQ) and Inverse Pole Figure (IPF) maps through superimposition of IQ and IPF maps and measurement of percentages of high and low angle grain boundaries was identified to assist in differentiation of acicular ferrite from Widmanstätten and bainitic ferrite morphologies. In addition two types of pearlitic structures were identified. There was no martensite detected in this weld structure. The morphology, size and chemistry of non-metallic inclusions are also discussed briefly. - Highlights: • Application of EBSD reveals orientation relationships in a range of phases for shielded metal arc welding of HSLA steel. • Nucleation sites of various ferrite morphologies identified • Formation of upper and lower bainite and their morphologies.

  1. Structural basis for acyl-group discrimination by human Gcn5L2

    PubMed Central

    Ringel, Alison E.; Wolberger, Cynthia

    2016-01-01

    Gcn5 is a conserved acetyltransferase that regulates transcription by acetylating the N-terminal tails of histones. Motivated by recent studies identifying a chemically diverse array of lysine acyl modifications in vivo, the acyl-chain specificity of the acetyltransferase human Gcn5 (Gcn5L2) was examined. Whereas Gcn5L2 robustly catalyzes lysine acetylation, the acyltransferase activity of Gcn5L2 becomes progressively weaker with increasing acyl-chain length. To understand how Gcn5 discriminates between different acyl-CoA molecules, structures of the catalytic domain of human Gcn5L2 bound to propionyl-CoA and butyryl-CoA were determined. Although the active site of Gcn5L2 can accommodate propionyl-CoA and butyryl-CoA without major structural rearrangements, butyryl-CoA adopts a conformation incompatible with catalysis that obstructs the path of the incoming lysine residue and acts as a competitive inhibitor of Gcn5L2 versus acetyl-CoA. These structures demonstrate how Gcn5L2 discriminates between acyl-chain donors and explain why Gcn5L2 has weak activity for acyl moieties that are larger than an acetyl group. PMID:27377381

  2. Prp19 Arrests Cell Cycle via Cdc5L in Hepatocellular Carcinoma Cells

    PubMed Central

    Huang, Renzheng; Xue, Ruyi; Qu, Di; Yin, Jie; Shen, Xi-Zhong

    2017-01-01

    Pre-mRNA processing factor 19 (Prp19) is involved in many cellular events including pre-mRNA processing and DNA damage response. Recently, it has been identified as a candidate oncogene in hepatocellular carcinoma (HCC). However, the role of Prp19 in tumor biology is still elusive. Here, we reported that Prp19 arrested cell cycle in HCC cells via regulating G2/M transition. Mechanistic insights revealed that silencing Prp19 inhibited the expression of cell division cycle 5-like (Cdc5L) via repressing the translation of Cdc5L mRNA and facilitating lysosome-mediated degradation of Cdc5L in HCC cells. Furthermore, we found that silencing Prp19 induced cell cycle arrest could be partially resumed by overexpressing Cdc5L. This work implied that Prp19 participated in mitotic progression and thus could be a promising therapeutic target of HCC. PMID:28387715

  3. Bax-PGAM5L-Drp1 complex is required for intrinsic apoptosis execution.

    PubMed

    Xu, Wenjuan; Jing, Linlin; Wang, Quanshi; Lin, Chung-Chih; Chen, Xiaoting; Diao, Jianxin; Liu, Yuanliang; Sun, Xuegang

    2015-10-06

    Intrinsic apoptosis eliminates cells with damaged DNA and cells with dysregulated expression of oncogene. PGAM5, a member of the phosphoglycerate mutase family, has two splicing variants: PGAM5L (the long form) and PGAM5S (the short form). It has been well established that PGAM5 is at the convergent point of multiple necrosis pathways. However, the role of PGAM5 in intrinsic apoptosis is still controversial. Here we report that the PGAM5L, but not PGAM5S is a prerequisite for the activation of Bax and dephosphorylation of Drp1 in arenobufagin and staurosporine induced intrinsic apoptosis. Knockdown of PGAM5L inhibits the translocation of Bax to the mitochondria and reduces mitochondrial fission. The interaction between PGAM5L and Drp1 was observed in both arenobufagin and staurosporine treated HCT116 cells, but not in HCT116 Bax(-/-) cells. Bax transfection rescues the formation of the triplex in both arenobufagin and staurosporine stimulated HCT116 Bax(-/-) cells. Arenobufagin shows remarkable anti-cancer effects both in orthotropic and heterotropic CRC models and demonstrates less toxic effects as compared with that of cisplatin. Bax-PGAM5L-Drp1 complex is detected in arenobufagin and staurosporine treated CRC cells in vitro and in arenobufagin and cisplatin treated tumor in vivo as well. In summary, our results demonstrate that Bax-PGAM5L-Drp1 complex is required for intrinsic apoptosis execution.

  4. Bax-PGAM5L-Drp1 complex is required for intrinsic apoptosis execution

    PubMed Central

    Lin, Chung-Chih; Chen, Xiaoting; Diao, Jianxin; Liu, Yuanliang; Sun, Xuegang

    2015-01-01

    Intrinsic apoptosis eliminates cells with damaged DNA and cells with dysregulated expression of oncogene. PGAM5, a member of the phosphoglycerate mutase family, has two splicing variants: PGAM5L (the long form) and PGAM5S (the short form). It has been well established that PGAM5 is at the convergent point of multiple necrosis pathways. However, the role of PGAM5 in intrinsic apoptosis is still controversial. Here we report that the PGAM5L, but not PGAM5S is a prerequisite for the activation of Bax and dephosphorylation of Drp1 in arenobufagin and staurosporine induced intrinsic apoptosis. Knockdown of PGAM5L inhibits the translocation of Bax to the mitochondria and reduces mitochondrial fission. The interaction between PGAM5L and Drp1 was observed in both arenobufagin and staurosporine treated HCT116 cells, but not in HCT116 Bax−/− cells. Bax transfection rescues the formation of the triplex in both arenobufagin and staurosporine stimulated HCT116 Bax−/− cells. Arenobufagin shows remarkable anti-cancer effects both in orthotropic and heterotropic CRC models and demonstrates less toxic effects as compared with that of cisplatin. Bax-PGAM5L-Drp1 complex is detected in arenobufagin and staurosporine treated CRC cells in vitro and in arenobufagin and cisplatin treated tumor in vivo as well. In summary, our results demonstrate that Bax-PGAM5L-Drp1 complex is required for intrinsic apoptosis execution. PMID:26356820

  5. Mapping Sri Lankan EQ-5D-3L to EQ-5D-5L Value Sets.

    PubMed

    Kularatna, Sanjeewa; Chen, Gang; Byrnes, Josh; Scuffham, Paul A

    2017-05-01

    Quality-adjusted life-years are the common outcome measure in contemporary economic evaluations in health care. Due to the limitations of the sensitivity of the EQ-5D-3L in specific disease conditions, the EuroQoL group has developed a new EQ-5D-5L classification system with 3,125 health states. This study estimated the Sri Lankan value set for the EQ-5D-5L using a crosswalk methodology. The EuroQoL group had developed a crosswalk methods to obtain interim value set for the EQ-5D-5L health states using available EQ-5D-3L values. This was achieved by mapping EQ-5D-3L and EQ-5D-5L ratings through cross tabulations by each dimension level. Using above official EuroQoL crosswalk probabilities, an interim value set for the Sri Lankan EQ-5D-5L health states were generated based upon the Sri Lankan EQ-5D-3L value set (which was estimated using time trade-off method: n= 780). Comparison were conducted between the Sri Lankan EQ-5D-5L values and other countries. The Sri Lankan EQ-5D-5L recorded utility value of -0.73 for the worst health state and 0.85 for a best possible utility for a health state other than the full health. The UK (mean= 0.4) and Japanese (mean = 0.45) EQ-5D-5L mean utility values were higher than the Sri Lankan values (mean = 0.07). However, Thailand median values (0.21) were closer to the Sri Lankan median values (0.14) than the UK (0.41) or Japan (0.45). This study produced the Sri Lankan EQ-5D-5L interim value set using crosswalk methods. Currently, this is the only EQ-5D-5L value set available for the South Asian region. Copyright © 2017. Published by Elsevier Inc.

  6. CD5L/AIM regulates lipid biosythesis and restrains Th17 cell pathogenicity

    PubMed Central

    Wang, Chao; Yosef, Nir; Gaublomme, Jellert; Wu, Chuan; Lee, Youjin; Clish, Clary B.; Kaminski, Jim; Xiao, Sheng; Horste, Gerd Meyer Zu; Pawlak, Mathias; Kishi, Yasuhiro; Joller, Nicole; Karwacz, Katarzyna; Zhu, Chen; Ordovas-Montanes, Maria; Madi, Asaf; Wortman, Ivo; Miyazaki, Toru; Sobel, Raymond A.; Park, Hongkun; Regev, Aviv; Kuchroo, Vijay K.

    2015-01-01

    Summary Th17 cells play a critical role in host defense against extracellular pathogens and tissue homeostasis, but can induce autoimmunity. The mechanisms implicated in balancing ‘pathogenic’ and ‘non-pathogenic’ Th17 cell states remain largely unknown. We used single-cell RNA-seq to identify CD5L/AIM as a regulator expressed in ‘non-pathogenic’ but not in ‘pathogenic’ Th17 cells. Although CD5L does not affect Th17 differentiation, it is a functional switch that regulates the pathogenicity of Th17 cells. Loss of CD5L converts ‘non-pathogenic’ Th17 cells into ‘pathogenic’ cells that induce autoimmunity. CD5L mediates this effect by modulating the intracellular lipidome, altering fatty acid composition, and restricting cholesterol biosynthesis, and thus ligand availability for Rorγt, the master transcription factor of Th17 cells. Our study identifies CD5L as a critical regulator of the Th17 cell functional state and highlights the importance of lipid metabolism in balancing immune protection and disease induced by T cells. PMID:26607793

  7. Large scale validation of the M5L lung CAD on heterogeneous CT datasets

    SciTech Connect

    Lopez Torres, E. E-mail: cerello@to.infn.it; Fiorina, E.; Pennazio, F.; Peroni, C.; Saletta, M.; Cerello, P. E-mail: cerello@to.infn.it; Camarlinghi, N.; Fantacci, M. E.

    2015-04-15

    Purpose: M5L, a fully automated computer-aided detection (CAD) system for the detection and segmentation of lung nodules in thoracic computed tomography (CT), is presented and validated on several image datasets. Methods: M5L is the combination of two independent subsystems, based on the Channeler Ant Model as a segmentation tool [lung channeler ant model (lungCAM)] and on the voxel-based neural approach. The lungCAM was upgraded with a scan equalization module and a new procedure to recover the nodules connected to other lung structures; its classification module, which makes use of a feed-forward neural network, is based of a small number of features (13), so as to minimize the risk of lacking generalization, which could be possible given the large difference between the size of the training and testing datasets, which contain 94 and 1019 CTs, respectively. The lungCAM (standalone) and M5L (combined) performance was extensively tested on 1043 CT scans from three independent datasets, including a detailed analysis of the full Lung Image Database Consortium/Image Database Resource Initiative database, which is not yet found in literature. Results: The lungCAM and M5L performance is consistent across the databases, with a sensitivity of about 70% and 80%, respectively, at eight false positive findings per scan, despite the variable annotation criteria and acquisition and reconstruction conditions. A reduced sensitivity is found for subtle nodules and ground glass opacities (GGO) structures. A comparison with other CAD systems is also presented. Conclusions: The M5L performance on a large and heterogeneous dataset is stable and satisfactory, although the development of a dedicated module for GGOs detection could further improve it, as well as an iterative optimization of the training procedure. The main aim of the present study was accomplished: M5L results do not deteriorate when increasing the dataset size, making it a candidate for supporting radiologists on large

  8. Application of EQ-5D-5L questionnaire in patients suffering from urinary incontinence.

    PubMed

    Garcia-Gordillo, M A; Collado-Mateo, D; Olivares, P R; Adsuar, J C

    2016-09-01

    Urinary incontinence is associated with reduced quality of life and given the high prevalence of people with this condition, it could be useful to know the impact of having urinary incontinence on physical, psychological and social aspects. The Spanish value set of EQ-5D was used to assign single scores to the EQ-5D-5L health states. EQ-5D-5L is a health-related quality of life questionnaire, which allows assessing health status. The aim of this study was to provide normative values of EQ-5D-5L in a population sample with urinary incontinence. Cross-sectional study. A total of 965 people with urinary incontinence (297 men and 668 women) were included in this study. EQ-5D-5L index, VAS and health status are showed in the current study considering gender, age group, region, marital status, smoking status, net monthly incomes of household and educational level. Higher prevalence was observed in women (69.22%) compared with men (30.78%). Mean (SD) EQ-5D-5L utility index and VAS score were 0.58 (0.40) and 53.91 (22.16), respectively, for overall population. The 16.1% (155 people) reported perfect health status (11111). The utility equivalent to set values 55555 was not reported by anyone. This study provides normative values of EQ-5D-5L in a Spanish population sample with urinary incontinence. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  9. Large scale validation of the M5L lung CAD on heterogeneous CT datasets.

    PubMed

    Torres, E Lopez; Fiorina, E; Pennazio, F; Peroni, C; Saletta, M; Camarlinghi, N; Fantacci, M E; Cerello, P

    2015-04-01

    M5L, a fully automated computer-aided detection (CAD) system for the detection and segmentation of lung nodules in thoracic computed tomography (CT), is presented and validated on several image datasets. M5L is the combination of two independent subsystems, based on the Channeler Ant Model as a segmentation tool [lung channeler ant model (lungCAM)] and on the voxel-based neural approach. The lungCAM was upgraded with a scan equalization module and a new procedure to recover the nodules connected to other lung structures; its classification module, which makes use of a feed-forward neural network, is based of a small number of features (13), so as to minimize the risk of lacking generalization, which could be possible given the large difference between the size of the training and testing datasets, which contain 94 and 1019 CTs, respectively. The lungCAM (standalone) and M5L (combined) performance was extensively tested on 1043 CT scans from three independent datasets, including a detailed analysis of the full Lung Image Database Consortium/Image Database Resource Initiative database, which is not yet found in literature. The lungCAM and M5L performance is consistent across the databases, with a sensitivity of about 70% and 80%, respectively, at eight false positive findings per scan, despite the variable annotation criteria and acquisition and reconstruction conditions. A reduced sensitivity is found for subtle nodules and ground glass opacities (GGO) structures. A comparison with other CAD systems is also presented. The M5L performance on a large and heterogeneous dataset is stable and satisfactory, although the development of a dedicated module for GGOs detection could further improve it, as well as an iterative optimization of the training procedure. The main aim of the present study was accomplished: M5L results do not deteriorate when increasing the dataset size, making it a candidate for supporting radiologists on large scale screenings and clinical programs.

  10. Structure, Stability, and Reorganization of 0.5 L0 Topography in Block Copolymer Thin Films.

    PubMed

    Maher, Michael J; Self, Jeffrey L; Stasiak, Pawel; Blachut, Gregory; Ellison, Christopher J; Matsen, Mark W; Bates, Christopher M; Willson, C Grant

    2016-11-22

    The structure, stability, and reorganization of lamella-forming block copolymer thin film surface topography ("islands" and "holes") were studied under boundary conditions driving the formation of 0.5 L0 thick structures at short thermal annealing times. Self-consistent field theory predicts that the presence of one perfectly neutral surface renders 0.5 L0 topography thermodynamically stable relative to 1 L0 thick features, in agreement with previous experimental observations. The calculated through-film structures match cross-sectional scanning electron micrographs, collectively demonstrating the pinning of edge dislocations at the neutral surface. Remarkably, near-neutral surface compositions exhibit 0.5 L0 topography metastability upon extended thermal treatment, slowly transitioning to 1 L0 islands or holes as evidenced by optical and atomic force microscopy. Surface restructuring is rationalized by invoking commensurability effects imposed by slightly preferential surfaces. The results described herein clarify the impact of interfacial interactions on block copolymer self-assembly and solidify an understanding of 0.5 L0 topography, which is frequently used to determine neutral surface compositions of considerable importance to contemporary technological applications.

  11. Mapping and direct valuation: do they give equivalent EQ-5D-5L index scores?

    PubMed

    Luo, Nan; Cheung, Yin Bun; Ng, Raymond; Lee, Chun Fan

    2015-10-05

    Utility values of health states defined by health-related quality of life instruments can be derived from either direct valuation ('valuation-derived') or mapping ('mapping-derived'). This study aimed to compare the utility-based EQ-5D-5L index scores derived from the two approaches as a means to validating the mapping function developed by van Hout et al for the EQ-5D-5L instrument. This was an observational study of 269 breast cancer patients whose EQ-5D-5L index scores were derived from both methods. For comparing discriminatory ability and responsiveness to change, multivariable regression models were used to estimate the effect sizes of various health indicators on the index scores. Agreement and test-retest reliability were examined using intraclass correlation coefficient (ICC). Whenever appropriate, the 90% confidence intervals (90% CI) were compared to predefined equivalence margins. The mean difference in and ICC between the valuation- and mapping-derived EQ-5D-5L index scores were 0.015 (90% CI = 0.006 to 0.024) and 0.915, respectively. Discriminatory ability and responsiveness of the two indices were equivalent in 13 of 15 regression analyses. However, the mapping-derived index score was lower than the valuation-derived index score in patients experiencing extreme health problems, and the test-retest reliability of the former was lower than the latter, for example, their ICCs differed by 0.121 (90% CI = 0.051 to 0.198) in patients who reported no change in performance status in the follow-up survey. This study provided the first evidence supporting the validity of the mapping function for converting EQ-5D-5L profile data into a utility-based index score.

  12. Large scale validation of the M5L lung CAD on heterogeneous CT datasets

    PubMed Central

    Lopez Torres, E.; Fiorina, E.; Pennazio, F.; Peroni, C.; Saletta, M.; Camarlinghi, N.; Fantacci, M. E.; Cerello, P.

    2015-01-01

    Purpose: M5L, a fully automated computer-aided detection (CAD) system for the detection and segmentation of lung nodules in thoracic computed tomography (CT), is presented and validated on several image datasets. Methods: M5L is the combination of two independent subsystems, based on the Channeler Ant Model as a segmentation tool [lung channeler ant model (lungCAM)] and on the voxel-based neural approach. The lungCAM was upgraded with a scan equalization module and a new procedure to recover the nodules connected to other lung structures; its classification module, which makes use of a feed-forward neural network, is based of a small number of features (13), so as to minimize the risk of lacking generalization, which could be possible given the large difference between the size of the training and testing datasets, which contain 94 and 1019 CTs, respectively. The lungCAM (standalone) and M5L (combined) performance was extensively tested on 1043 CT scans from three independent datasets, including a detailed analysis of the full Lung Image Database Consortium/Image Database Resource Initiative database, which is not yet found in literature. Results: The lungCAM and M5L performance is consistent across the databases, with a sensitivity of about 70% and 80%, respectively, at eight false positive findings per scan, despite the variable annotation criteria and acquisition and reconstruction conditions. A reduced sensitivity is found for subtle nodules and ground glass opacities (GGO) structures. A comparison with other CAD systems is also presented. Conclusions: The M5L performance on a large and heterogeneous dataset is stable and satisfactory, although the development of a dedicated module for GGOs detection could further improve it, as well as an iterative optimization of the training procedure. The main aim of the present study was accomplished: M5L results do not deteriorate when increasing the dataset size, making it a candidate for supporting radiologists on large

  13. Effect of Celluclast 1.5L on the Physicochemical Characterization of Gold Kiwifruit Pectin

    PubMed Central

    Yuliarti, Oni; Matia-Merino, Lara; Goh, Kelvin K. T.; Mawson, John A.; Brennan, Charles S.

    2011-01-01

    The effects of Celluclast 1.5L concentration on the physicochemical characterization of gold kiwifruit pectin was evaluated. Varying the enzyme concentration affected the pectin yield and pectin physicochemical properties. The viscosity of extracted pectin was largely dependent on the enzyme concentration. Celluclast 1.5L with medium concentration exhibited the highest viscosity. Varying the enzyme concentration also influenced the molecular weight distribution. High molecular weight (Mw) pectin (1.65 × 106 g/mol) was obtained when the medium concentration was used. Overall, the study clearly reflects the importance of taking into consideration the amount of cellulytic enzyme added in order to determine the final quality of pectin. PMID:22072895

  14. Bauschinger effect on API 5L B and X56 steel plates under repeating bending load

    NASA Astrophysics Data System (ADS)

    Chandra, Icho Y.; Korda, Akhmad A.

    2017-01-01

    During steel pipe fabrication, hot rolled coil steel will undergo coiling and uncoiling process, where the steel plate is bent repeatedly. When cyclic loading is imposed on steel, tensile and compressive stress will occur in it resulting in softening caused by Bauschinger effect. This research is focused on Bauschinger effect and cyclic loading during coiling and uncoiling process on API 5L B and API 5L X56 steel. Both types of steel were given repeated bend loading with variation in loading cycle and the curvature radius. The steel's response was then observed by using tensile testing, microhardness testing, and microstructure observation. A decrease in yield strength is observed during lower cycles and on smaller radii. After higher loading cycle, the yield strength of the steel was increased. Microhardness testing also reported similar results on the subsurface part of the steel where loading is at its highest.

  15. Sample size determination for EQ-5D-5L value set studies.

    PubMed

    Gandhi, Mihir; Xu, Ying; Luo, Nan; Cheung, Yin Bun

    2017-08-19

    The EuroQol 5-Dimension (EQ-5D) is a widely used health status instrument for cost-utility analysis of healthcare interventions. Recently, its 5-Level version (EQ-5D-5L) and a protocol for conducting valuation of its health states were developed. We propose four approaches for estimating the sample size for EQ-5D-5L valuation according to the standardized procedures of the protocol. The first approach is for estimating mean health state utility values with a desired precision level using a regression model. The second approach, empirical in nature, determines a sample size based on mean absolute error in predicting health state values using a large-scale reference study. The last two approaches are for assessing the significance of regression coefficients of health state descriptors and to estimate the regression coefficients with a desired precision for predicting health state utility values. Using data from a Singaporean study, we estimated parameters that are useful for sample size determination, including the design effect. Each of the approaches was illustrated with examples and pragmatic recommendations were provided. Capitalizing on the EQ-5D-5L valuation protocol, we proposed four sample size estimation approaches which can help to decide an appropriate sample size for a value set study.

  16. NORMATIVE VALUES OF EQ-5D-5L FOR DIABETES PATIENTS FROM SPAIN.

    PubMed

    Collado Mateo, Daniel; García Gordillo, Miguel A; Olivares, Pedro R; Adsuar, José C

    2015-10-01

    Introducción: la diabetes es una enfermedad metabólica que puede conllevar una reducción de la calidad de vida relacionada con la salud. El EQ-5D es un cuestionario genérico de calidad de vida relacionada con la salud basado en preferencias sociales. Este cuestionario ha sido muy utilizado en pacientes con diabetes. Objetivo: el objetivo del presente artículo es informar sobre los valores normativos del cuestionario EQ-5D-5L en personas españolas con diabetes. Métodos: se utilizaron datos de la Encuesta Española de Salud (2011/2012). Un total de 1.857 personas con diabetes participaron en la encuesta. La puntuación del EQ-5D-5L se ha reflejado en función del sexo, región (incluyendo las 17 comunidades autónomas y las 2 ciudades autónomas de España), y 8 grupos de edad. Resultados: la media del índice de utilidad para toda la muestra fue de 0,742. Esta fue mejor para hombres (0,826) que para mujeres (0,673). Resultados similares se observaron en la Escala Visual Analógica. El efecto techo fue mucho mayor en hombres (44,83%) que en mujeres (24,41%). Conclusiones: el presente estudio recoge datos normativos representativos del EQ-5D-5L en España de personas con diabetes.

  17. Valuation and Modeling of EQ-5D-5L Health States Using a Hybrid Approach.

    PubMed

    Ramos-Goñi, Juan M; Pinto-Prades, Jose L; Oppe, Mark; Cabasés, Juan M; Serrano-Aguilar, Pedro; Rivero-Arias, Oliver

    2017-07-01

    The EQ-5D instrument is the most widely used preference-based health-related quality of life questionnaire in cost-effectiveness analysis of health care technologies. Recently, a version called EQ-5D-5L with 5 levels on each dimension was developed. This manuscript explores the performance of a hybrid approach for the modeling of EQ-5D-5L valuation data. Two elicitation techniques, the composite time trade-off, and discrete choice experiments, were applied to a sample of the Spanish population (n=1000) using a computer-based questionnaire. The sampling process consisted of 2 stages: stratified sampling of geographic area, followed by systematic sampling in each area. A hybrid regression model combining composite time trade-off and discrete choice data was used to estimate the potential value sets using main effects as starting point. The comparison between the models was performed using the criteria of logical consistency, goodness of fit, and parsimony. Twenty-seven participants from the 1000 were removed following the exclusion criteria. The best-fitted model included 2 significant interaction terms but resulted in marginal improvements in model fit compared to the main effects model. We therefore selected the model results with main effects as a potential value set for this methodological study, based on the parsimony criteria. The results showed that the main effects hybrid model was consistent, with a range of utility values between 1 and -0.224. This paper shows the feasibility of using a hybrid approach to estimate a value set for EQ-5D-5L valuation data.

  18. Quality Control Process for EQ-5D-5L Valuation Studies.

    PubMed

    Ramos-Goñi, Juan M; Oppe, Mark; Slaap, Bernhard; Busschbach, Jan J V; Stolk, Elly

    2017-03-01

    The values of the five-level EuroQol five-dimensional questionnaire (EQ-5D-5L) are elicited using composite time trade-off and discrete choice experiments. Unfortunately, data quality issues and interviewer effects were observed in the first few EQ-5D-5L valuation studies. To prevent these issues from occurring in later studies, the EuroQol Group established a cyclic quality control (QC) process. To describe this QC process and show its impact on data quality. A newly developed QC tool provided information about protocol compliance, interviewer effects, and mean values by health state severity. In a cyclic process, this information is initially used to evaluate whether new interviewers meet minimal quality requirements and later to provide feedback about how their performance may be improved. To investigate the impact of this cyclic process, we compared the quality of the data in Dutch and Spanish valuation studies that did not have this QC process with that in the follow-up studies in the same countries that used the QC process. Data quality was measured using protocol violations, variability between interviewers, the proportion of inconsistent responders, and clustering of composite time trade-off values. In Spain, protocol violations were reduced from 87% in the valuation study to 5% in the follow-up study and in the Netherlands from 20% to 8%. In both countries, interviewers performed more homogeneously in the follow-up studies. The number of inconsistent respondents was reduced by 23.2% in Spain and 23.6% in the Netherlands. Values were less clustered in the follow-up studies. The implementation of a strict QC process in EQ-5D-5L valuation studies increases interviewer protocol compliance and promotes data quality. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  19. The human CD5L/AIM-CD36 axis: A novel autophagy inducer in macrophages that modulates inflammatory responses.

    PubMed

    Sanjurjo, Lucía; Amézaga, Núria; Aran, Gemma; Naranjo-Gómez, Mar; Arias, Lilibeth; Armengol, Carolina; Borràs, Francesc E; Sarrias, Maria-Rosa

    2015-01-01

    CD5L (CD5 molecule-like) is a secreted glycoprotein that participates in host response to bacterial infection. CD5L influences the monocyte inflammatory response to the bacterial surface molecules lipopolysaccharide (LPS) and lipoteichoic acid (LTA) by inhibiting TNF secretion. Here we studied the intracellular events that lead to macrophage TNF inhibition by human CD5L. To accomplish this goal, we performed functional analyses with human monocytic THP1 macrophages, as well as with peripheral blood monocytes. Inhibition of phosphatidylinositol 3-kinase (PtdIns3K) reversed the inhibitory effect of CD5L on TNF secretion. Among the various PtdIns3K isoforms, our results indicated that CD5L activates PtdIns3K (whose catalytic subunit is termed PIK3C3), a key modulator involved in autophagy. Further analysis revealed a concomitant enhancement of autophagy markers such as cellular LC3-II content, increased LC3 puncta, as well as LC3-LysoTracker Red colocalization. Moreover, electron microscopy showed an increased presence of cytosolic autophagosomes in THP1 macrophages overexpressing CD5L. Besides preventing TNF secretion, CD5L also inhibited IL1B and enhanced IL10 secretion. This macrophage anti-inflammatory pattern of CD5L was reverted upon silencing of autophagy protein ATG7 by siRNA transfection. Additional siRNA experiments in THP1 macrophages indicated that the induction of autophagy mechanisms by CD5L was achieved through cell-surface scavenger receptor CD36, a multiligand receptor expressed in a wide variety of cell types. Our data represent the first evidence that CD36 is involved in autophagy and point to a significant contribution of the CD5L-CD36 axis to the induction of macrophage autophagy.

  20. Complement C5a receptors C5L2 and C5aR in renal fibrosis.

    PubMed

    Martin, Ina V; Bohner, Annika; Boor, Peter; Shagdarsuren, Erdenechimeg; Raffetseder, Ute; Lammert, Frank; Floege, Jürgen; Ostendorf, Tammo; Weber, Susanne N

    2017-09-13

    Complement factor C5a has two known receptors, C5aR mediating pro-inflammatory effects and C5L2, a potential C5a scavenger. We previously identified C5a/C5aR signaling as a potent profibrotic pathway in the kidney. Here we tested for the first time the role of C5L2 in renal fibrosis. In unilateral ureteral obstruction (UUO)-induced kidney fibrosis, the expression of C5aR and C5L2 increased similarly and gradually as fibrosis progressed and was particularly prominent in injured dilated tubules. Genetic deficiency of either C5aR or C5L2 significantly reduced UUO-induced tubular injury. Expression of key pro-inflammatory mediators, however, significantly increased in C5L2- compared to C5aR-deficient mice, but this had no effect on the number of renal infiltrating macrophages or T-cells. Moreover, in C5L2-/--mice the cytokine and MMP-inhibitor TIMP-1 was specifically enhanced. Consequently, in C5L2-/--mice the degree of renal fibrosis was similar to WT, albeit with reduced mRNA expression of some fibrosis-related genes. In contrast, C5aR-/--mice had significantly reduced renal fibrosis compared to WT- and C5L2-/--mice in UUO. In vitro experiments with primary tubular cells demonstrated, that deficiency for either C5aR or C5L2 led to a significantly reduced expression of tubular injury- and fibrosis-markers. Vice versa, stimulation of WT tubular cells with C5a significantly induced the expression of these markers, whereas absence of either receptor abolished this induction. In conclusion, in experimental renal fibrosis C5L2 and C5aR both contribute to tubular injury, and, while C5aR acts profibrotic, C5L2 does not play a role in extracellular matrix accumulation, arguing against C5L2 functioning simply as a decoy receptor. Copyright © 2017, American Journal of Physiology-Renal Physiology.

  1. Translation, validity and reliability of the British Sign Language (BSL) version of the EQ-5D-5L.

    PubMed

    Rogers, Katherine D; Pilling, Mark; Davies, Linda; Belk, Rachel; Nassimi-Green, Catherine; Young, Alys

    2016-07-01

    To translate the health questionnaire EuroQol EQ-5D-5L into British Sign Language (BSL), to test its reliability with the signing Deaf population of BSL users in the UK and to validate its psychometric properties. The EQ-5D-5L BSL was developed following the international standard for translation required by EuroQol, with additional agreed features appropriate to a visual language. Data collection used an online platform to view the signed (BSL) version of the tests. The psychometric testing included content validity, assessed by interviewing a small sample of Deaf people. Reliability was tested by internal consistency of the items and test-retest, and convergent validity was assessed by determining how well EQ-5D-5L BSL correlates with CORE-10 BSL and CORE-6D BSL. The psychometric properties of the EQ-5D-5L BSL are good, indicating that it can be used to measure health status in the Deaf signing population in the UK. Convergent validity between EQ-5D-5L BSL and CORE-10 BSL and CORE-6D BSL is consistent, demonstrating that the BSL version of EQ-5D-5L is a good measure of the health status of an individual. The test-retest reliability of EQ-5D-5L BSL, for each dimension of health, was shown to have Cohen's kappa values of 0.47-0.61; these were in the range of moderate to good and were therefore acceptable. This is the first time EQ-5D-5L has been translated into a signed language for use with Deaf people and is a significant step forward towards conducting studies of health status and cost-effectiveness in this population.

  2. A novel mutation in C5L2 gene was associated with hyperlipidemia and retinitis pigmentosa in a Chinese family

    PubMed Central

    2014-01-01

    Background Previous studies indicated that hyperlipidemia was associated with retinitis pigmentosa (RP). We aimed to identify the mutations in the C5L2 gene which was reported to be associated with hyperlipidemia in a Chinese family with (RP). Methods The Proband from the family was screened for mutations in the C5L2 gene that was known to cause hyperlipidemia. Cosegregation analysis was performed in the available family members. Linkage analysis was performed for one missense mutation to calculate the likelihood of its pathogenicity. One hundred and fifty unrelated, healthy Chinese subjects were screened to exclude nonpathogenic polymorphisms. Results By direct sequencing method, we identified a novel mutation (Thr196Asn) in C5L2 gene. In this family, each affected family members with RP showed a heterozygous mutation in the C5L2 gene. And all the carriers with heterozygous mutation have increased serum lipid levels in this family. Conclusions The present study has extended the mutation spectrum of C5L2, and Thr196Asn mutations in C5L2 were associated with RP and serum lipid levels. PMID:24885523

  3. Cross-cultural measurement equivalence of the EQ-5D-5L items for English-speaking Asians in Singapore.

    PubMed

    Luo, N; Wang, Y; How, C H; Wong, K Y; Shen, L; Tay, E G; Thumboo, J; Herdman, M

    2015-06-01

    To investigate how the response labels of the 5-level EQ-5D (EQ-5D-5L) items are interpreted and used by English-speaking Chinese and non-Chinese Singaporeans, as a means to assessing whether those items are cross-culturally equivalent health-status measures in this Asian population. In face-to-face interviews, Chinese, Malay and Indian visitors to a primary care institution in Singapore were asked to rate the relative severity conveyed by EQ-5D-5L response labels, each containing the keyword of 'no(t),' 'slight(ly),' 'moderate(ly),' 'severe(ly),' or 'unable'/'extreme(ly),' using a 0-100 numerical rating scale. Participants were also asked to describe 25 hypothetical health states using the EQ-5D-5L response labels. Differences between Chinese and Malay/Indian participants in label interpretation and selection were examined using multivariate regression analysis to adjust for participant characteristics. The differences in adjusted mean severity scores for individual EQ-5D-5L labels between Chinese (n = 148) and non-Chinese (Malay: n = 53; Indian: n = 56) participants ranged from 0.0 to 9.0. The relative severity of the labels to the participants supported the ordinality of the EQ-5D-5L response labels and was similar across ethnic groups. Chinese and non-Chinese participants selected similar response labels to describe each hypothetical health state, with the adjusted odds ratios of selecting any type of the five response labels for non-Chinese versus Chinese participants ranging from 0.92 to 1.15 (p > 0.05 for all). The EQ-5D-5L items are likely to generate equivalent health outcomes between English-speaking Chinese and non-Chinese Singaporeans.

  4. Adhesions of extracellular surface-layer associated proteins in Lactobacillus M5-L and Q8-L.

    PubMed

    Zhang, Yingchun; Xiang, Xinling; Lu, Qianhui; Zhang, Lanwei; Ma, Fang; Wang, Linlin

    2016-02-01

    Surface-layer associated proteins (SLAP) that envelop Lactobacillus paracasei ssp. paracasei M5-L and Lactobacillus casei Q8-L cell surfaces are involved in the adherence of these strain to the human intestinal cell line HT-29. To further elucidate some of the properties of these proteins, we assessed the yields and expressions of SLAP under different incubation conditions. An efficient and selective extraction of SLAP was obtained when cells of Lactobacillus were treated with 5 M LiCl at 37°C in aerobic conditions. The SLAP of Lactobacillus M5-L and Q8-L in cell extracts were visualized by SDS-PAGE and identified by Western blotting with sulfo-N-hydroxysuccinimide-biotin-labeled HT-29 cells as adhesion proteins. Atomic force microscopy contact imaging revealed that Lactobacillus strains M5-L and Q8-L normally display a smooth, homogeneous surface, whereas the surfaces of M5-L and Q8-L treated with 5 M LiCl were rough and more heterogeneous. Analysis of adhesion forces revealed that the initial adhesion forces of 1.41 and 1.28 nN obtained for normal Lactobacillus M5-L and Q8-L strains, respectively, decreased to 0.70 and 0.48 nN, respectively, following 5 M LiCl treatment. Finally, the dominant 45-kDa protein bands of Lactobacillus Q8-L and Lactobacillus M5-L were identified as elongation factor Tu and surface antigen, respectively, by liquid chromatography-tandem mass spectrometry.

  5. Quality of life profile and psychometric properties of the EQ-5D-5L in HIV/AIDS patients

    PubMed Central

    2012-01-01

    Objectives We assessed health-related quality of life (HRQOL), its associated factors, and examined measurement properties of the EuroQol - 5 Dimensions - 5 Levels (EQ-5D-5L) in HIV/AIDS patients. Methods A cross-sectional multi-site survey was conducted in 1016 patients (age: 35.4 ± 7.0 years; 63.8% male) in three epicenters of Vietnam. Internal consistency reliability, convergent validity, and discriminative validity of the EQ-5D-5L and a visual analogue scale (VAS) were evaluated. Tobit censored regression models were used to identify predictors of HRQOL in HIV/AIDS patients. Results The mean EQ-5D-5L single index and VAS were 0.65 (95% Confidence Interval (CI) = 0.63; 0.67) and 70.3 (95% CI = 69.2; 71.5). Cronbach’s alpha of five dimensions was 0.85. EQ-5D-5L has a good convergent validity with VAS (0.73). It discriminated patients at different HIV/AIDS stages, duration of ART, and CD4 cell count. Predictors of poorer HRQOL included being female, lower education level, unemployment, alcohol and drug use, CD4<200 cells/mL, and advanced HIV/AIDS stages. Conclusion The EQ-5D-5L has good measurement properties in HIV/AIDS patients and holds potentials for monitoring ART outcomes. Integration of HRQOL measurement using EQ-5D-5L in HIV/AIDS clinical practice could be helpful for economic evaluation of HIV/AIDS interventions. PMID:23116130

  6. Study on (100-x)(70Li2S-30P2S5)-xLi2ZrO3 glass-ceramic electrolyte for all-solid-state lithium-ion batteries

    NASA Astrophysics Data System (ADS)

    Lu, Penghao; Ding, Fei; Xu, Zhibin; Liu, Jiaquan; Liu, Xingjiang; Xu, Qiang

    2017-07-01

    A novel glass-ceramic electrolyte of (100-x)(70Li2S-30P2S5)-xLi2ZrO3 (x = 0, 1, 2, 5) is successfully prepared by a vibratory ball-milling method and followed by a heat-treatment process. Composition of the ternary sulfide electrolyte and the heat-treatment process are optimized by physical characterizations and electrochemical measurements. The testing results show that the optimal substitution quantity of Li2ZrO3 into the Li2S-P2S5 electrolyte substrate is 1 mol %. An appropriate heat-treatment temperature of 99(70Li2S-30P2S5)-1Li2ZrO3 glass-ceramic electrolyte is 285 °C. Among the as-prepared ternary electrolyte samples, 99(70Li2S-30P2S5)-1Li2ZrO3 glass-ceramic electrolyte may exhibit the highest conductivity of 2.85 × 10-3 S cm-1 at room temperature, which is much higher than that of the 70Li2S-30P2S5 glass-ceramic electrolyte. Compared to that of the all-solid-state lithium-ion battery of LiCoO2/70Li2S-30P2S5/In-Li, discharge capacities of all-solid-state lithium-ion battery of LiCoO2/99(70Li2S-30P2S5)-1Li2ZrO3/In-Li may increase 41.0% at the 10th charge-discharge cycle and 21.9% at the 50th charge-discharge cycle, respectively. Furthermore, electrochemical impedance spectroscopy (EIS) analyses of all-solid-state lithium-ion batteries reveal that addition of Li2ZrO3 into the Li2S-P2S5 electrolyte substrate may decrease the interfacial resistance between the electrodes and solid electrolyte. The improvement of electrochemical performances of 99(70Li2S-30P2S5)-1Li2ZrO3 glass-ceramic electrolyte is ascribed to both the stable crystal structure and a high lithium-ion diffusion coefficient of Li2ZrO3.

  7. C5L2 and C5aR interaction in adipocytes and macrophages: insights into adipoimmunology.

    PubMed

    Poursharifi, Pegah; Lapointe, Marc; Pétrin, Darlaine; Devost, Dominic; Gauvreau, Danny; Hébert, Terence E; Cianflone, Katherine

    2013-04-01

    Obesity is associated with inflammation characterized by increased infiltration of macrophages into adipose tissue. C5aR-like receptor 2 (C5L2) has been identified as a receptor for acylation-stimulating protein (ASP) and the inflammatory factor C5a, which also binds C5aR. The present study examines the effects of ligands ASP and C5a on interactions between the receptors C5L2 and C5aR in 3T3-L1 adipocytes and J774 macrophages. BRET experiments indicate that C5L2 and C5aR form homo- and heterodimers in transfected HEK 293 cells, which were stable in the presence of ligand. Cell surface receptor levels of C5L2 and C5aR increased during 3T3-L1 adipocyte differentiation; both receptors are also highly expressed in J774 macrophages. Using confocal microscopy to evaluate endogenous receptors in adipocytes following stimulation with ASP or C5a, C5L2 is internalized with increasing perinuclear colocalization with C5aR. There is little C5a-dependent colocalization in macrophages. While adipocyte-conditioned medium (ACM) increased C5L2-C5aR colocalization in macrophages, this was blocked by C5a. ASP stimulation increased Akt (Ser(473)) phosphorylation in both cell types; C5a induced slight Akt phosphorylation in adipocytes with less effect in macrophages. ASP, but not C5a, increased fatty acid uptake/esterification in adipocytes. C5L2-C5aR homodimerization versus heterodimerization may thus contribute to differential responses obtained following ASP vs C5a stimulation of adipocytes and macrophages, providing new insights into the complex interaction between these two cell types within adipose tissue. Studying the mechanisms involved in the differential responses of C5L2-C5aR activation based on cell type will further our understanding of inflammatory processes in obesity. Copyright © 2012 Elsevier Inc. All rights reserved.

  8. The EQ-5D-5L health status questionnaire in COPD: validity, responsiveness and minimum important difference

    PubMed Central

    Nolan, Claire M; Longworth, Louise; Lord, Joanne; Canavan, Jane L; Jones, Sarah E; Kon, Samantha S C; Man, William D-C

    2016-01-01

    Background The EQ-5D, a generic health status questionnaire that is widely used in health economic evaluation, was recently expanded to the EQ-5D-5L to address criticisms of unresponsiveness and ceiling effect. Aims To describe the validity, responsiveness and minimum important difference of the EQ-5D-5L in COPD. Methods Study 1: The validity of the EQ-5D-5L utility index and visual analogue scale (EQ-VAS) was compared with four established disease-specific health status questionnaires and other measures of disease severity in 616 stable outpatients with COPD. Study 2: The EQ-5D-5L utility index and EQ-VAS were measured in 324 patients with COPD before and after 8 weeks of pulmonary rehabilitation. Distribution and anchor-based approaches were used to estimate the minimum important difference. Results There were moderate-to-strong correlations between utility index and EQ-VAS with disease-specific questionnaires (Pearson's r=0.47–0.72). A ceiling effect was seen in 7% and 2.6% of utility index and EQ-VAS. Utility index decreased (worsening health status) with indices of worsening disease severity. With rehabilitation, mean (95% CI) changes in utility index and EQ-VAS were 0.065 (0.047 to 0.083) and 8.6 (6.5 to 10.7), respectively, with standardised response means of 0.39 and 0.44. The mean (range) anchor estimates of the minimum important difference for utility index and EQ-VAS were 0.051 (0.037 to 0.063) and 6.9 (6.5 to 8.0), respectively. Conclusions The EQ-5D-5L is a valid and responsive measure of health status in COPD and may provide useful additional cost-effectiveness data in clinical trials. PMID:27030578

  9. C5L2, the Second C5a Anaphylatoxin Receptor, Suppresses LPS-Induced Acute Lung Injury.

    PubMed

    Wang, Ruobing; Lu, Bao; Gerard, Craig; Gerard, Norma P

    2016-11-01

    LPS-induced lung injury in the mouse is one of the most robust experimental models used for studies of acute lung injury (ALI) and acute respiratory distress syndrome in humans. Prior clinical and experimental studies support an important role for complement activation, particularly production of C5a, in the pathophysiology of human ALI/acute respiratory distress syndrome. In the mouse model, however, the precise role of C5a and its receptors is unclear. C5L2, an enigmatic second receptor for C5a, has been characterized, and results have generated substantial debate regarding its in vivo function. Our previous work with human neutrophils revealed a unique role for C5L2 in negatively modulating C5a-C5a receptor (C5aR)-mediated cellular activation, in which antibody-mediated blockade of C5L2 resulted in augmented C5a-C5aR responses. Here, we demonstrate that C5L2(-/-) mice (BALB/c background) administered intranasal LPS exhibit significantly more airway edema and hemorrhage than do wild-type animals. Bronchoalveolar lavage fluid and lung homogenates have significantly more neutrophils and myeloperoxidase activity, as well as proinflammatory cytokines and chemokines. When a blocking antibody against the C5aR was administered before LPS administration, the increased neutrophilic infiltration and cytokine levels were reversed. Thus, our data show not only that C5a contributes significantly to LPS-induced ALI in the mouse, but also that C5L2 plays an important antiinflammatory role in this model through actions resulting at least in part from negative modulation of C5a receptor activation.

  10. Acetylation of mitochondrial proteins by GCN5L1 promotes enhanced fatty acid oxidation in the heart.

    PubMed

    Thapa, Dharendra; Zhang, Manling; Manning, Janet R; Guimarães, Danielle A; Stoner, Michael W; O'Doherty, Robert M; Shiva, Sruti; Scott, Iain

    2017-08-01

    Lysine acetylation is a reversible posttranslational modification and is particularly important in the regulation of mitochondrial metabolic enzymes. Acetylation uses acetyl-CoA derived from fuel metabolism as a cofactor, thereby linking nutrition to metabolic activity. In the present study, we investigated how mitochondrial acetylation status in the heart is controlled by food intake and how these changes affect mitochondrial metabolism. We found that there was a significant increase in cardiac mitochondrial protein acetylation in mice fed a long-term high-fat diet and that this change correlated with an increase in the abundance of the mitochondrial acetyltransferase-related protein GCN5L1. We showed that the acetylation status of several mitochondrial fatty acid oxidation enzymes (long-chain acyl-CoA dehydrogenase, short-chain acyl-CoA dehydrogenase, and hydroxyacyl-CoA dehydrogenase) and a pyruvate oxidation enzyme (pyruvate dehydrogenase) was significantly upregulated in high-fat diet-fed mice and that the increase in long-chain and short-chain acyl-CoA dehydrogenase acetylation correlated with increased enzymatic activity. Finally, we demonstrated that the acetylation of mitochondrial fatty acid oxidation proteins was decreased after GCN5L1 knockdown and that the reduced acetylation led to diminished fatty acid oxidation in cultured H9C2 cells. These data indicate that lysine acetylation promotes fatty acid oxidation in the heart and that this modification is regulated in part by the activity of GCN5L1.NEW & NOTEWORTHY Recent research has shown that acetylation of mitochondrial fatty acid oxidation enzymes has greatly contrasting effects on their activity in different tissues. Here, we provide new evidence that acetylation of cardiac mitochondrial fatty acid oxidation enzymes by GCN5L1 significantly upregulates their activity in diet-induced obese mice. Copyright © 2017 the American Physiological Society.

  11. A program of methodological research to arrive at the new international EQ-5D-5L valuation protocol.

    PubMed

    Oppe, Mark; Devlin, Nancy J; van Hout, Ben; Krabbe, Paul F M; de Charro, Frank

    2014-06-01

    To describe the research that has been undertaken by the EuroQol Group to improve current methods for health state valuation, to summarize the results of an extensive international pilot program, and to outline the key elements of the five-level EuroQol five-dimensional (EQ-5D-5L) questionnaire valuation protocol, which is the culmination of that work. To improve on methods of health state valuation for the EQ-5D-5L questionnaire, we investigated the performance of different variants of time trade-off and discrete choice tasks in a multinational setting. We also investigated the effect of three modes of administration on health state valuation: group interviews, online self-completion, and face-to-face interviews. The research program provided the basis for the EQ-5D-5L questionnaire valuation protocol. Two different types of tasks are included to derive preferences: a newly developed composite time trade-off task and a forced-choice paired comparisons discrete choice task. Furthermore, standardized blocked designs for the selection of the states to be valued by participants were created and implemented together with all other elements of the valuation protocol in a digital aid, the EuroQol Valuation Technology, which was developed in conjunction with the protocol. The EuroQol Group has developed a standard protocol, with accompanying digital aid and interviewer training materials, that can be used to create value sets for the EQ-5D-5L questionnaire. The use of a well-described, consistent protocol across all countries enhances the comparability of value sets between countries, and allows the exploration of the influence of cultural and other factors on health state values. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  12. A qualitative examination of the content validity of the EQ-5D-5L in patients with type 2 diabetes.

    PubMed

    Matza, Louis S; Boye, Kristina S; Stewart, Katie D; Curtis, Bradley H; Reaney, Matthew; Landrian, Amanda S

    2015-12-01

    The EQ-5D is frequently used to derive utilities for patients with type 2 diabetes (T2D). Despite widely available quantitative psychometric data on the EQ-5D, little is known about content validity in this population. Thus, the purpose of this qualitative study was to examine content validity of the EQ-5D in patients with T2D. Patients with T2D in the UK completed concept elicitation interviews, followed by administration of the EQ-5D-5L and cognitive interviewing focused on the instrument's relevance, clarity, and comprehensiveness. A total of 25 participants completed interviews (52.0 % male; mean age = 53.5 years). Approximately half (52 %) reported that the EQ-5D-5L was relevant to their experience with T2D. When asked if each individual item was relevant to their experience with T2D, responses varied widely (24.0 % said the self-care item was relevant; 68.0 % said the anxiety/depression item was relevant). Participants frequently said items were not relevant to themselves, but could be relevant to patients with more severe diabetes. Most participants (92.0 %) reported that T2D and/or its treatment/monitoring requirements had an impact on their quality of life that was not captured by the EQ-5D-5L. Common missing concepts included food awareness/restriction (n = 13, 52.0 %); activities (n = 11, 44.0 %); emotional functioning other than depression/anxiety (n = 8, 32.0 %); and social/relationship functioning (n = 8, 32.0 %). The results highlight strengths and potential limitations of the EQ-5D-5L, including missing content that could be important for some patients with T2D. Suggestions for addressing limitations are provided.

  13. A Time Trade-off-derived Value Set of the EQ-5D-5L for Canada.

    PubMed

    Xie, Feng; Pullenayegum, Eleanor; Gaebel, Kathy; Bansback, Nick; Bryan, Stirling; Ohinmaa, Arto; Poissant, Lise; Johnson, Jeffrey A

    2016-01-01

    The 5-level version of the EQ-5D (EQ-5D-5L) was recently developed. A number of preference-based scoring systems are being developed for several countries around the world. To develop a value set for the EQ-5D-5L based on societal preferences in Canada. We used age, sex, and education quota sampling from the general population from 4 cities across Canada. Composite time trade-off (cTTO) and traditional time trade-off (tTTO) were used as the main elicitation technique. A total of 86 EQ-5D-5L health states grouped into 10 blocks were valued using cTTO, whereas a subset of 18 severe states was also valued using tTTO. Participants meeting predefined inconsistency criteria were excluded from the analyses. For the value set development, we used tTTO and positive cTTO values, while censoring negative and zero cTTO values at zero. Models with the main effects presented using linear terms combined with various additional terms were estimated. The preferred model was selected based primarily on logically ordered coefficients, and secondly model fit. Of the 1209 participants who completed the interview, 136 met criteria that excluded them from the primary analyses. The demographics and socioeconomic status of the remaining 1073 participants were similar to the Canadian general population. The preferred model has 5 linear terms for the main effects, a term for level 4 or 5 for each dimension, and a term for the squared total number of level 4 or 5 beyond the first. For this preferred model, the health utilities ranged from -0.148 for the worst (55555) to 0.949 for the best (11111) EQ-5D-5L states. This is the first TTO-based value set of the EQ-5D-5L for Canada. It can be used to support the health utility estimation in economic evaluations for reimbursement decision making in Canada.

  14. Influence of the maximum applied magnetic field on the angular dependence of Magnetic Barkhausen Noise in API5L steels

    NASA Astrophysics Data System (ADS)

    Martínez-Ortiz, P.; Pérez-Benítez, J. A.; Espina-Hernández, J. H.; Caleyo, F.; Mehboob, N.; Grössinger, R.; Hallen, J. M.

    2016-03-01

    This work studies the influence of the maximum applied magnetic field on the angular dependence of the energy of the Magnetic Barkhausen Noise signal in three different API5L pipeline steels. The results show that the shape of the angular dependence of the Magnetic Barkhausen Noise energy changes with the increase of the amplitude of the applied magnetic field. This phenomenon is a consequence of the presence of unlike magnetization processes at different magnitudes of the applied magnetic field. The outcomes reveal the importance of controlling the value of the maximum applied field as parameter for the improvement of the MBN angular dependence measurements.

  15. Comment on "Simple thermodynamic derivation of the electrocapillary equations" by E.M. Gutman [Surf. Sci. 639 (2015) L5-L8

    NASA Astrophysics Data System (ADS)

    Makkonen, Lasse

    2016-05-01

    Gutman [1] presents strongly worded criticism on the recent effort to simplify the derivations of the electrocapillary equations by a clear-cut thermodynamic analysis [2]. It is outlined here that the points raised by Gutman [1] are misunderstandings of the purpose and the details of the criticized paper [2].

  16. A Head-to-Head Comparison of UK SF-6D and Thai and UK EQ-5D-5L Value Sets in Thai Patients with Chronic Diseases.

    PubMed

    Sakthong, Phantipa; Munpan, Wipaporn

    2017-03-13

    Little was known about the head-to-head comparison of psychometric properties between SF-6D and EQ-5D-5L or the different value sets of EQ-5D-5L. Therefore, this study set out to compare the psychometric properties including agreement, convergent, and known-group validity between the SF-6D and the EQ-5D-5L using the real value sets from Thailand and the UK in patients with chronic diseases. 356 adults taking a medication for at least 3 months were identified from a university hospital in Bangkok, Thailand, between July 2014 and March 2015. Agreement was assessed by intraclass correlation coefficients (ICCs) and Bland-Altman plots. Convergent validity was evaluated using Spearman's rank correlation coefficients between SF-6D and EQ-5D-5L and EQ-VAS and SF-12v2. For known-groups validity, the Mann-Whitney U test and Kruskal-Wallis test were used to examine the associations between SF-6D and EQ-5D-5L and patient characteristics. Agreements between the SF-6D and the EQ-5D-5L using Thai and UK value sets were fair, with ICCs of 0.45 and 0.49, respectively. Bland-Altman plots showed that the majority of the SF-6D index scores were lower than the EQ-5D-5L index scores. Both the EQ-5D-5L value sets were more related to the EQ-VAS and physical health, while the SF-6D was more associated with mental health. Both EQ-5D-5L value sets were more sensitive than the SF-6D in discriminating patients with different levels of more known groups except for adverse drug reactions. The SF-6D and both EQ-5D-5L value sets appeared to be valid but sensitive to different outcomes in Thai patients with chronic diseases.

  17. The Effect of Altitude Conditions on the Particle Emissions of a J85-GE-5L Turbojet Engine

    NASA Technical Reports Server (NTRS)

    Rickey, June Elizabeth

    1995-01-01

    Particles from a J85-GE-5L turbojet engine were measured over a range of engine speeds at simulated altitude conditions ranging from near sea level to 45,000 ft and at flight Mach numbers of 0.5 and 0.8. Samples were collected from the engine by using a specially designed probe positioned several inches behind the exhaust nozzle. A differential mobility particle sizing system was used to determine particle size. Particle data measured at near sea-level conditions were compared with Navy Aircraft Environmental Support Office (AESO) particle data taken from a GE-J85-4A engine at a sea-level static condition. Particle data from the J85 engine were also compared with particle data from a J85 combustor at three different simulated altitudes.

  18. Validity, responsiveness, and minimal clinically important difference of EQ-5D-5L in stroke patients undergoing rehabilitation.

    PubMed

    Chen, Poyu; Lin, Keh-Chung; Liing, Rong-Jiuan; Wu, Ching-Yi; Chen, Chia-Ling; Chang, Ku-Chou

    2016-06-01

    To examine the criterion validity, responsiveness, and minimal clinically important difference (MCID) of the EuroQoL 5-Dimensions Questionnaire (EQ-5D-5L) and visual analog scale (EQ-VAS) in people receiving rehabilitation after stroke. The EQ-5D-5L, along with four criterion measures-the Medical Research Council scales for muscle strength, the Fugl-Meyer assessment, the functional independence measure, and the Stroke Impact Scale-was administered to 65 patients with stroke before and after 3- to 4-week therapy. Criterion validity was estimated using the Spearman correlation coefficient. Responsiveness was analyzed by the effect size, standardized response mean (SRM), and criterion responsiveness. The MCID was determined by anchor-based and distribution-based approaches. The percentage of patients exceeding the MCID was also reported. Concurrent validity of the EQ-Index was better compared with the EQ-VAS. The EQ-Index has better power for predicting the rehabilitation outcome in the activities of daily living than other motor-related outcome measures. The EQ-Index was moderately responsive to change (SRM = 0.63), whereas the EQ-VAS was only mildly responsive to change. The MCID estimation of the EQ-Index (the percentage of patients exceeding the MCID) was 0.10 (33.8 %) and 0.10 (33.8 %) based on the anchor-based and distribution-based approaches, respectively, and the estimation of EQ-VAS was 8.61 (41.5 %) and 10.82 (32.3 %). The EQ-Index has shown reasonable concurrent validity, limited predictive validity, and acceptable responsiveness for detecting the health-related quality of life in stroke patients undergoing rehabilitation, but not for EQ-VAS. Future research considering different recovery stages after stroke is warranted to validate these estimations.

  19. Cross-cultural measurement equivalence of the 5-level EQ-5D (EQ-5D-5L) in patients with type 2 diabetes mellitus in Singapore.

    PubMed

    Wang, Ye; Tan, Ngiap-Chuan; Tay, Ee-Guan; Thumboo, Julian; Luo, Nan

    2015-07-16

    This study aimed to assess the measurement equivalence of the 5-level EQ-5D (EQ-5D-5L) among the English, Chinese, and Malay versions. A convenience sample of patients with type 2 diabetes mellitus were enrolled from a public primary health care institution in Singapore. The survey questionnaire comprised the EQ-5D-5L and questions assessing participants' socio-demographic and clinical characteristics. Multiple linear regression models were used to assess the difference in EQ-5D-5L index (calculated using an interim algorithm) and EQ-visual analog scale (EQ-VAS) scores across survey language (Chinese vs. English, Malay vs. English, and Malay vs. Chinese). Measurement equivalence was examined by comparing the 90% confidence interval of difference in the EQ-5D-5L index and EQ-VAS scores with a pre-determined equivalence margin. Multiple logistic regression models were used to assess the response patterns of the 5 Likert-type items of the EQ-5D-5L across survey language. Equivalence was demonstrated between the Chinese and English versions and between the Malay and English versions of the EQ-5D-5L index scores. Equivalence was also demonstrated between the Chinese and English versions and between the Malay and Chinese versions of the EQ-VAS scores. Equivalence could not be determined between the Malay and Chinese versions of the EQ-5D-5L index score and between the Malay and English versions of the EQ-VAS score. No significant difference was found in responses to EQ-5D-5L items between any languages, except that patients who chose to complete the Chinese version were more likely to report "no problems" in mobility compared to those who completed the Malay version of the questionnaire. This study provided evidence for the measurement equivalence of the different language versions of EQ-5D-5L in Singapore.

  20. GCN5L1 modulates cross-talk between mitochondria and cell signaling to regulate FoxO1 stability and gluconeogenesis.

    PubMed

    Wang, Lingdi; Scott, Iain; Zhu, Lu; Wu, Kaiyuan; Han, Kim; Chen, Yong; Gucek, Marjan; Sack, Michael N

    2017-09-12

    The mitochondrial enriched GCN5-like 1 (GCN5L1) protein has been shown to modulate mitochondrial protein acetylation, mitochondrial content and mitochondrial retrograde signaling. Here we show that hepatic GCN5L1 ablation reduces fasting glucose levels and blunts hepatic gluconeogenesis without affecting systemic glucose tolerance. PEPCK and G6Pase transcript levels are downregulated in hepatocytes from GCN5L1 liver specific knockout mice and their upstream regulator, FoxO1 protein levels are decreased via proteasome-dependent degradation and via reactive oxygen species mediated ERK-1/2 phosphorylation. ERK inhibition restores FoxO1, gluconeogenic enzyme expression and glucose production. Reconstitution of mitochondrial-targeted GCN5L1 blunts mitochondrial ROS, ERK activation and increases FoxO1, gluconeogenic enzyme expression and hepatocyte glucose production. We suggest that mitochondrial GCN5L1 modulates post-translational control of FoxO1, regulates gluconeogenesis and controls metabolic pathways via mitochondrial ROS mediated ERK activation. Exploring mechanisms underpinning GCN5L1 mediated ROS signaling may expand our understanding of the role of mitochondria in gluconeogenesis control.Hepatic gluconeogenesis is tightly regulated at transcriptional level and is essential for survival during prolonged fasting. Here Wang et al. show that the mitochondrial enriched GCN5-like 1 protein controls hepatic glucose production by regulating FoxO1 protein levels via proteasome-dependent degradation and, in turn, gluconeogenic gene expression.

  1. Scaled-up bioconversion of fish waste to liquid fertilizer using a 5 L ribbon-type reactor.

    PubMed

    Dao, Van Thingoc; Kim, Joong Kyun

    2011-10-01

    A scaled-up conversion process of fish waste to liquid fertilizer was performed in a 5 L ribbon-type reactor. Biodegradation was performed by inoculation of autoclaved fish waste with 5.84 × 10(5) CFU mL(-1) of mixed microorganisms for 96 h. As a result, the pH changed from 6.92 to 5.72, the cell number reached 7.28 × 10(5) CFU mL(-1), and approximately 430 g (28.3%) of fish waste was degraded. Analyses indicated that the 96 h culture of inoculated fish waste possessed comparable fertilizing ability to commercial fertilizers in hydroponic culture with amino acid contents of 6.91 g 100 g(-1). Therefore, the scaled-up production achieved a more satisfactory fish waste degradation rate (3.61 g h(-1)) than the flask-scale production (0.24 g h(-1)). The biodegraded broth of fish waste at room temperature did not undergo putrefaction for 6 months due to the addition of 1% lactate.

  2. Corrosion rate of API 5L Gr. X60 multipurpose steel pipeline under combined effect of water and crude oil

    NASA Astrophysics Data System (ADS)

    Miao, Jian; Wang, Qiang

    2016-09-01

    Multipurpose pipeline is often seriously corroded during its service life, and the phenomenon is more prominent once the transportation medium is changed. Electrochemical polarization curves and impedance spectroscopy of the API 5L Gr. X60 steel pipeline's corrosion process in sedimentary water with different ion types and their concentrations have been studied in this work. The results showed that the corrosion rates were found to be 0.00418 and 0.00232 mm/a for pure water and crude oil, respectively. However, for the mixtures of water and crude oil (with water content increased from 0.2 vol% to 10 vol%), the corrosion rate increased consistently and reached a maximum value of 0.15557 mm/a for 10 vol% water in crude oil. The effect of the concentration of various ions, namely, chloride, bicarbonate and sulfate in (oil/water) mixtures on the corrosion rate was characterized by weight-loss method. The results showed that with increasing the ions' concentrations, the corresponding exchange current density increased significantly. The results were further supported by the observations of corrosion morphology using scanning electron microscopy and are helpful in devising guidelines which would help in reducing corrosion in multipurpose transport pipelines involving a change of transported medium during their service life.

  3. Effect of artificial aging on the microstructure of weldment on API 5L X-52 steel pipe

    SciTech Connect

    Vargas-Arista, B. . E-mail: bvarista26@yahoo.com.mx; Hallen, J.M. . E-mail: j_hallen@yahoo.com; Albiter, A. . E-mail: aalbiter@imp.mx

    2007-08-15

    The effects of artificial aging on the microstructure in the weldment of an API 5L X-52 steel pipe were studied. Aging was performed at 250 deg. C over a period of 1000 h and values were recorded at every 100 h intervals. Transmission electron microscopy observations showed precipitation strengthening from nearly circular Nb-C containing nanoparticles for the base metal and heat affected zone, and cementite for the weld metal. The largest amount of precipitation in the weldment zone was obtained at 500 h, due to peak-aging, which showed the highest particle density. The weld metal was more susceptible to aging, exhibiting the highest increase in precipitation at 500 h, followed by the heat affected zone. After 500 h, the deterioration in the microstructure was caused by the coarsening of particles due to over-aging. The base metal showed the larger increment in particle size after 900 h of aging accompanied by a bigger decrease in fine particles than in the weld metal.

  4. Mapping the SRS-22r questionnaire onto the EQ-5D-5L utility score in patients with adolescent idiopathic scoliosis.

    PubMed

    Wong, Carlos King Ho; Cheung, Prudence Wing Hang; Samartzis, Dino; Luk, Keith Dip-Kei; Cheung, Kenneth M C; Lam, Cindy Lo Kuen; Cheung, Jason Pui Yin

    2017-01-01

    This is a prospective study to establish prediction models that map the refined Scoliosis Research Society 22-item (SRS-22r) onto EuroQoL-5 dimension 5-level (EQ-5D-5L) utility scores in adolescent idiopathic scoliosis (AIS) patients. Comparison of treatment outcomes in AIS can be determined by cost-utility analysis. However, the mainstay spine-specific health-related quality of life outcome measure, the SRS-22r questionnaire does not provide utility assessment. In this study, AIS patients were prospectively recruited to complete both the EQ-5D-5L and SRS-22r questionnaires by trained interviewers. Ordinary least squares regression was undertaken to develop mapping models, which the validity and robustness were assessed by using the 10-fold cross-validation procedure. EQ-5D-5L utility scores were regressed on demographics, Cobb angle, curve types, treatment modalities, and five domains of the SRS-22r questionnaire. Three models were developed using stepwise selection method. EQ-5D-5L scores were regressed on 1) main effects of SRS-22r subscale scores, 2) as per 1 plus squared and interaction terms, and 3) as per 2 plus demographic and clinical characteristics. Model goodness-of-fit was assessed using R-square, adjusted R-square, and information criteria; whereas the predictive performance was evaluated using root mean square error (RMSE), mean absolute error (MAE), and the proportion of absolute error within the threshold of 0.05 and 0.10. A total of 227 AIS patients with mean age of 15.6 years were recruited. The EQ-5D-5L scores were predicted by four domains of SRS-22r (main effects of 'Function', 'Pain', 'Appearance' and 'Mental Health', and squared term of 'Function' and 'Pain'), and Cobb angle in Model 3 with the best goodness-of-fit (R-square/adjusted R-square: 62.1%/60.9%). Three models demonstrated an acceptance predictive performance in error analysis applying 10-fold cross-validation to three models where RMSE and MAE were between 0.063-0.065 and between

  5. Measuring health-related quality of life in chronic obstructive pulmonary disease: properties of the EQ-5D-5L and PROMIS-43 short form

    PubMed Central

    2014-01-01

    Background The Patient Reported Outcomes Measurement Information System 43-item short form (PROMIS-43) and the five-level EQ-5D (EQ-5D-5L) are recently developed measures of health-related quality of life (HRQL) that have potentially broad application in evaluating treatments and capturing burden of respiratory-related diseases. The aims of this study were: (1) to examine their psychometric properties in patients with chronic obstructive pulmonary disease (COPD), and (2) to identify dimensions of HRQL that differ and do not differ by lung function. Methods We conducted a multi-center, cross-sectional study (“COPD Outcomes-based Network for Clinical Effectiveness & Research Translation” [CONCERT]). We analyzed patients who met spirometric criteria for COPD, and completed EQ-5D-5L and PROMIS questionnaires. Disease severity was graded based on the Global Initiative for Chronic Obstructive Lung Disease (GOLD) classification. Pulmonary function test, PROMIS-43, EQ-5D (index score and EQ-Visual Analog Scale [EQ-VAS]), six minute walk test (6MWT), and three dyspnea scales (mMRC, Borg, FACIT-Dyspnea) were administered. Validity and reliability of EQ-5D-5L and PROMIS-43 were examined, and differences in HRQL by GOLD grade were assessed. Results Data from 670 patients with COPD were analyzed (mean age 68.5 years; 58% male). More severe COPD was associated with more problems with mobility, self-care and usual activities (all p-values <0.01) according to EQ-5D-5L. Related domains on EQ-5D-5L, PROMIS and clinical measures were moderately (r = 0.30-0.49) to strongly (r ≥ 0.50) correlated. A statistically significant trend of decreasing HRQL with more severe lung functions was observed for EQ-5D-5L index scores, EQ-VAS scores, and PROMIS physical function and social roles. Conclusions Results supported the validity of EQ-5D-5L and PROMIS-43 in COPD patients, and indicate that physical function and social activities decrease with level of lung function by GOLD

  6. A Qualitative Assessment of the Content Validity of the ICECAP-A and EQ-5D-5L and Their Appropriateness for Use in Health Research

    PubMed Central

    Keeley, Thomas; Al-Janabi, Hareth; Lorgelly, Paula; Coast, Joanna

    2013-01-01

    Purpose The ICECAP-A and EQ-5D-5L are two index measures appropriate for use in health research. Assessment of content validity allows understanding of whether a measure captures the most relevant and important aspects of a concept. This paper reports a qualitative assessment of the content validity and appropriateness for use of the eq-5D-5L and ICECAP-A measures, using novel methodology. Methods In-depth semi-structured interviews were conducted with research professionals in the UK and Australia. Informants were purposively sampled based on their professional role. Data were analysed in an iterative, thematic and constant comparative manner. A two stage investigation - the comparative direct approach - was developed to address the methodological challenges of the content validity research and allow rigorous assessment. Results Informants viewed the ICECAP-A as an assessment of the broader determinants of quality of life, but lacking in assessment of health-related determinants. The eq-5D-5L was viewed as offering good coverage of health determinants, but as lacking in assessment of these broader determinants. Informants held some concerns about the content or wording of the Self-care, Pain/Discomfort and Anxiety/Depression items (EQ-5D-5L) and the Enjoyment, Achievement and attachment items (ICECAP-A). Conclusion Using rigorous qualitative methodology the results suggest that the ICECAP-A and EQ-5D-5L hold acceptable levels of content validity and are appropriate for use in health research. This work adds expert opinion to the emerging body of research using patients and public to validate these measures. PMID:24367708

  7. Comparing the performance of the EQ-5D-3L and the EQ-5D-5L in young Portuguese adults.

    PubMed

    Ferreira, Lara N; Ferreira, Pedro L; Ribeiro, Filipa P; Pereira, Luis N

    2016-06-08

    Some studies have reported a ceiling effect in EQ-5D-3L, especially in healthy and/or young individuals. Recently, two further levels have been included in its measurement model (EQ-5D-5L). The purposes of this study were (1) to assess the properties of the EQ-5D-5L in comparison with the standard EQ-5D-3L in a sample of young adults, (2) to foreground the importance of collecting qualitative data to confirm, validate or refine the EQ-5D questionnaire items and (3) to raise questions pertaining to the wording in these questionnaire items. The data used came from a sample of respondents aged 30 or under (n = 624). They completed both versions of the EQ-5D, which were compared in terms of feasibility, level of inconsistency and ceiling effect. Agreement between the instruments was assessed using correlation coefficients and Bland-Altman plots. Known-groups validity of the EQ-5D-5L was also assessed using non-parametric tests. The discriminative properties were compared using receiver operating characteristic curves. Finally, four interviews were conducted for retrospective reports to elicit respondents' understanding and perceptions of the format, instructions, items, and responses. Quantitative results show a ceiling effect reduction of 25.3 % and a high level agreement between both indices. Known-groups validity was confirmed for the EQ-5D-5L. Explorative interviews indicated ambiguity and low degree of certainty in regards to conceptualizing differences between levels moderate-slight across three dimensions. The EQ-5D-5L performed better than the EQ-5D-3L. However, the explorative interviews demonstrated several limitations in the EQ-5D questionnaire wording and high context-dependent answers point to lack of illnesses' experience amongst young adults.

  8. Valuation of the EQ-5D-5L with composite time trade-off for the German population - an exploratory study.

    PubMed

    Ludwig, Kristina; von der Schulenburg, J-Matthias Graf; Greiner, Wolfgang

    2017-02-20

    The EuroQol Group has extended the severity levels of the EQ-5D from three to five (EQ-5D-5L). There are valuation studies worldwide planned in order to convert the EQ-5D-5L health states into a single preference-based summary score based on country-specific value sets of social health status preference valuations. The EuroQol Group developed an internationally standardised EQ-5D-5L valuation protocol. Based on the experiences of the first wave of valuation studies applying the protocol, a number of modifications to the implementation of composite time trade-off (cTTO) were proposed and tested in an exploratory study in Germany. The aim of the study is to test the improved EQ-5D-5L valuation protocol 1.1 and the implementation of three modifications: (1) introduction of ranking task, (2) separating time trade-off (TTO) tasks for health states "Better Than Dead"(BTD)/"Worse Than Dead" (WTD), (3) allow for removal of problematic valuations from the cTTO data (the feedback module). Data were collected in computer assisted personal interviews with 200 members of the German general public. In comparison to the first wave of valuation studies a higher data quality can be observed in both study arms: increasing number of WTD valuations, reduced inconsistencies for health state 55555 as well as higher values for mild health states. Comparing both study arms, mean observed cTTO value for severity 6 is higher in the test arm. The proportion of inconsistent cTTO responses is lower in the test arm than in the control arm and is further reduced by the feedback module. The ranking task prolongs the interview without the desired effect. Both study arms yielded higher data quality in comparison to the first wave of EQ-5D-5L valuation studies. The valuation protocol combined with an intensive interviewer training and close data monitoring showed a high feasibility and acceptability to the respondents of the general population as well as the interviewers in Germany. Based on the

  9. Does the Introduction of the Ranking Task in Valuation Studies Improve Data Quality and Reduce Inconsistencies? The Case of the EQ-5D-5L.

    PubMed

    Ramos-Goñi, Juan M; Rand-Hendriksen, Kim; Pinto-Prades, Jose Luis

    2016-06-01

    Time trade-off (TTO)-based valuation studies for the three-level version of the EuroQol five-dimensional questionnaire (EQ-5D) typically started off with a ranking task (ordering the health states by preference). This was not included in the protocol for the five-level EQ-5D (EQ-5D-5L) valuation study. To test whether reintroducing a ranking task before the composite TTO (C-TTO) could help to reduce inconsistencies in C-TTO responses and improve the data quality. Respondents were randomly assigned to three study arms. The control arm was the present EQ-5D-5L study protocol, without ranking. The second arm (ranking without sorting) preceded the present protocol by asking respondents to rank the target health states using physical cards. The states were then valued in random order using C-TTO. In the third arm (ranking and sorting), the ranked states remained visible through the C-TTO tasks and the order of valuation was determined by the ranking. The study used only 10 EQ-5D-5L health states. We compared the C-TTO-based inconsistent pairs of health states and ties. The final sample size was 196 in the control arm, 205 in the ranking without sorting arm, and 199 in the ranking and sorting arm. The percentages of ties by respondents were 15.1%, 12.5%, and 12.6% for the control arm, the ranking without sorting arm, and the ranking and sorting arm, respectively. The extra cost for adding the ranking task was about 15%. The benefit does not justify the effort involved in the ranking task. For this reason, the addition of the ranking task to the present EQ-5D-5L valuation protocol is not an attractive option. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  10. CTNNBL1 facilitates the association of CWC15 with CDC5L and is required to maintain the abundance of the Prp19 spliceosomal complex

    PubMed Central

    van Maldegem, Febe; Maslen, Sarah; Johnson, Christopher M.; Chandra, Anita; Ganesh, Karuna; Skehel, Mark; Rada, Cristina

    2015-01-01

    In order to catalyse the splicing of messenger RNA, multiple proteins and RNA components associate and dissociate in a dynamic highly choreographed process. The Prp19 complex is a conserved essential part of the splicing machinery thought to facilitate the conformational changes the spliceosome undergoes during catalysis. Dynamic protein interactions often involve highly disordered regions that are difficult to study by structural methods. Using amine crosslinking and hydrogen–deuterium exchange coupled to mass spectrometry, we describe the architecture of the Prp19 sub-complex that contains CTNNBL1. Deficiency in CTNNBL1 leads to delayed initiation of cell division and embryonic lethality. Here we show that in vitro CTNNBL1 enhances the association of CWC15 and CDC5L, both core Prp19 complex proteins and identify an overlap in the region of CDC5L that binds either CTNNBL1 or CWC15 suggesting the two proteins might exchange places in the complex. Furthermore, in vivo, CTNNBL1 is required to maintain normal levels of the Prp19 complex and to facilitate the interaction of CWC15 with CDC5L. Our results identify a chaperone function for CTNNBL1 within the essential Prp19 complex, a function required to maintain the integrity of the complex and to support efficient splicing. PMID:26130721

  11. Mapping the SRS-22r questionnaire onto the EQ-5D-5L utility score in patients with adolescent idiopathic scoliosis

    PubMed Central

    Samartzis, Dino; Luk, Keith Dip-Kei; Cheung, Kenneth M. C.; Lam, Cindy Lo Kuen

    2017-01-01

    This is a prospective study to establish prediction models that map the refined Scoliosis Research Society 22-item (SRS-22r) onto EuroQoL-5 dimension 5-level (EQ-5D-5L) utility scores in adolescent idiopathic scoliosis (AIS) patients. Comparison of treatment outcomes in AIS can be determined by cost-utility analysis. However, the mainstay spine-specific health-related quality of life outcome measure, the SRS-22r questionnaire does not provide utility assessment. In this study, AIS patients were prospectively recruited to complete both the EQ-5D-5L and SRS-22r questionnaires by trained interviewers. Ordinary least squares regression was undertaken to develop mapping models, which the validity and robustness were assessed by using the 10-fold cross-validation procedure. EQ-5D-5L utility scores were regressed on demographics, Cobb angle, curve types, treatment modalities, and five domains of the SRS-22r questionnaire. Three models were developed using stepwise selection method. EQ-5D-5L scores were regressed on 1) main effects of SRS-22r subscale scores, 2) as per 1 plus squared and interaction terms, and 3) as per 2 plus demographic and clinical characteristics. Model goodness-of-fit was assessed using R-square, adjusted R-square, and information criteria; whereas the predictive performance was evaluated using root mean square error (RMSE), mean absolute error (MAE), and the proportion of absolute error within the threshold of 0.05 and 0.10. A total of 227 AIS patients with mean age of 15.6 years were recruited. The EQ-5D-5L scores were predicted by four domains of SRS-22r (main effects of ‘Function’, ‘Pain’, ‘Appearance’ and ‘Mental Health’, and squared term of ‘Function’ and ‘Pain’), and Cobb angle in Model 3 with the best goodness-of-fit (R-square/adjusted R-square: 62.1%/60.9%). Three models demonstrated an acceptance predictive performance in error analysis applying 10-fold cross-validation to three models where RMSE and MAE were between

  12. Extracellular histones are essential effectors of C5aR- and C5L2-mediated tissue damage and inflammation in acute lung injury

    PubMed Central

    Bosmann, Markus; Grailer, Jamison J.; Ruemmler, Robert; Russkamp, Norman F.; Zetoune, Firas S.; Sarma, J. Vidya; Standiford, Theodore J.; Ward, Peter A.

    2013-01-01

    We investigated how complement activation promotes tissue injury and organ dysfunction during acute inflammation. Three models of acute lung injury (ALI) induced by LPS, IgG immune complexes, or C5a were used in C57BL/6 mice, all models requiring availability of both C5a receptors (C5aR and C5L2) for full development of ALI. Ligation of C5aR and C5L2 with C5a triggered the appearance of histones (H3 and H4) in bronchoalveolar lavage fluid (BALF). BALF from humans with ALI contained H4 histone. Histones were absent in control BALF from healthy volunteers. In mice with ALI, in vivo neutralization of H4 with IgG antibody reduced the intensity of ALI. Neutrophil depletion in mice with ALI markedly reduced H4 presence in BALF and was highly protective. The direct lung damaging effects of extracellular histones were demonstrated by airway administration of histones into mice and rats (Sprague-Dawley), which resulted in ALI that was C5a receptor-independent, and associated with intense inflammation, PMN accumulation, damage/destruction of alveolar epithelial cells, together with release into lung of cytokines/chemokines. High-resolution magnetic resonance imaging demonstrated lung damage, edema and consolidation in histone-injured lungs. These studies confirm the destructive C5a-dependent effects in lung linked to appearance of extracellular histones.—Bosmann, M., Grailer, J. J., Ruemmler, R., Russkamp, N. F., Zetoune, F. S., Sarma, J. V., Standiford, T. J., Ward, P. A. Extracellular histones are essential effectors of C5aR- and C5L2-mediated tissue damage and inflammation in acute lung injury. PMID:23982144

  13. Health literacy and logical inconsistencies in valuations of hypothetical health states: results from the Canadian EQ-5D-5L valuation study.

    PubMed

    Al Sayah, Fatima; Johnson, Jeffrey A; Ohinmaa, Arto; Xie, Feng; Bansback, Nick

    2017-06-01

    To examine the association of health literacy with logical inconsistencies in time trade-off valuations of hypothetical health states described by the EQ-5D-5L classification system. Data from the EQ-5D-5L Canadian Valuation study were used. Health literacy was assessed using the Brief Health Literacy Screen. A health state valuation was considered logically inconsistent if a respondent gave the same or lower value for a very mild health state compared to the value given to 55555, or gave the same or lower value for a very mild health state compared to value assigned to the majority of the health states that are dominated by the very mild health state. Average age of respondents (N = 1209) was 48 (SD = 17) years, 45% were male, 7% reported inadequate health literacy, and 11% had a logical inconsistency. In adjusted analysis, participants with inadequate health literacy were 2.2 (95%CI: 1.2, 4.0; p = 0.014) times more likely to provide an inconsistent valuation compared to those with adequate health literacy. More specifically, those who had problems in "understanding written information" and "reading health information" were more likely to have a logical inconsistency compared to those who did not. However, lacking "confidence in completing medical forms" was not associated with logical inconsistencies. Health literacy was associated with logical inconsistencies in valuations of hypothetical health states described by the EQ-5D-5L classification system. Valuations studies should consider assessing health literacy, and explore better ways to introduce the valuation tasks or use simpler approaches of health preferences elicitation for individuals with inadequate health literacy.

  14. The Effect of Temperature and Acid Gas Loading on Corrosion Behavior of API 5L X52 Carbon Steel in Amine Unit

    NASA Astrophysics Data System (ADS)

    Javidi, M.; Lalehparvar, M. M.; Ghassemi, A.

    2016-05-01

    The effect of temperature and H2S concentration on amine corrosion of API 5L X52 carbon steel in a CO2-saturated 25 wt.% diethanolamine solution was investigated via electrochemical techniques. It was found that increase in temperature from 25 to 80 °C resulted in severe increase in corrosion rate from 0.88 to 16.24 mpy due to increase in degradation rate of amine. Also, it was concluded that increase in H2S concentration led to increase in corrosion rate because of formation of more heat stable amine salts. The effect of temperature on corrosion rate was more significant than acid gas loading.

  15. Utilization of nondestructive electrochemical techniques in characterizing microbiologically influenced corrosion (MIC) of API-5L X65 carbon linepipe steel: Laboratory study

    NASA Astrophysics Data System (ADS)

    Al-Abbas, F.; Kakpovbia, A.; Mishra, B.; Olson, D.; Spear, J.

    2012-05-01

    Nondestructive electrochemical techniques were used to investigate the microbiologically influenced corrosion (MIC) by Sulfate Reducing Bacteria (SRB) corrosion of API 5L X65 linepipe steel. These techniques included Electrochemical Impedance Spectroscopy (EIS), open circuit potential (OCP) and linear polarization resistance (Rp). OCP trend showed anodic polarization of 67 mV between the biotic media with reference to abiotic media. These shifts were attributed to the cathodic side reactions produced by the metabolic activity of SRB. Through circuit modeling, EIS results were used to interpret the real time interactions between the electrode, biofilm and solution interfaces.

  16. Recombinant C3adesArg/acylation stimulating protein (ASP) is highly bioactive: a critical evaluation of C5L2 binding and 3T3-L1 adipocyte activation.

    PubMed

    Cui, Wei; Lapointe, Marc; Gauvreau, Danny; Kalant, David; Cianflone, Katherine

    2009-10-01

    C5L2 is a recently identified receptor for C5a/C5adesArg, C3a and C3adesArg (ASP). C5a/C5adesArg bind with high affinity, with no identified activation. By contrast, some studies demonstrate C3a/ASP binding/activation to C5L2; others do not. Our aim is to critically evaluate ASP/C3adesArg-C5L2 binding and bioactivity. Cell-associated fluorescent-ASP (Fl-ASP) binding to C5L2 increased from transiently transfected5L2-HEK for both human C5L2 and mouse C5L2. Transfected C5L2-CHO cells had similar results. Endogenous C5L2 expression increased from 3T3-L1 preadipocytes<3T3-L1 adipocytes5L2-HEK (Fl-ASP sorted) and 3T3-L1 cells, blocking with 10% fetal calf serum, protamine sulfate or ovalbumin prevented (125)I-ASP non-specific binding (NSB, no cells), while albumin increased NSB. Binding to non-transfected HEK was comparable to NSB. Optimal specific binding was obtained at 20 degrees C (vs. 4 degrees C) in PBS or serum-free medium with K(d) 83.7+/-23.7 nM (C5L2-HEK), 66+/-15 nM (C5L2-CHO) and 76+/-14.3 nM (3T3-L1 preadipocytes); (125)I-C5a binding had greater affinity. Fl-ASP-C5L2 binding was comparable and concentration dependent (K(d) 31 nM (direct binding) and IC(50) 35 nM (competition binding) regardless of conditions). Recombinant ASP (rASP) produced in modified Escherichia coli Origami (DE3) (allowing folding and disulphide bridge formation), purified under non-denaturing conditions demonstrated 10x greater bioactivity vs. proteolytically derived plasma ASP for triglyceride synthesis and fatty acid uptake in 3T3-L1 adipocytes and preadipocytes while adipose tissue from C5L2 KO mice was non-responsive. rASP stimulation of adipocyte BODIPY-fatty acid uptake demonstrated EC(50) 115+/-93 nM and maximal stimulation of 413+/-33%, p<0.001. ASP binding has distinct characteristics that lead to C5L2 activation and increased

  17. Extracellular histones are essential effectors of C5aR- and C5L2-mediated tissue damage and inflammation in acute lung injury.

    PubMed

    Bosmann, Markus; Grailer, Jamison J; Ruemmler, Robert; Russkamp, Norman F; Zetoune, Firas S; Sarma, J Vidya; Standiford, Theodore J; Ward, Peter A

    2013-12-01

    We investigated how complement activation promotes tissue injury and organ dysfunction during acute inflammation. Three models of acute lung injury (ALI) induced by LPS, IgG immune complexes, or C5a were used in C57BL/6 mice, all models requiring availability of both C5a receptors (C5aR and C5L2) for full development of ALI. Ligation of C5aR and C5L2 with C5a triggered the appearance of histones (H3 and H4) in bronchoalveolar lavage fluid (BALF). BALF from humans with ALI contained H4 histone. Histones were absent in control BALF from healthy volunteers. In mice with ALI, in vivo neutralization of H4 with IgG antibody reduced the intensity of ALI. Neutrophil depletion in mice with ALI markedly reduced H4 presence in BALF and was highly protective. The direct lung damaging effects of extracellular histones were demonstrated by airway administration of histones into mice and rats (Sprague-Dawley), which resulted in ALI that was C5a receptor-independent, and associated with intense inflammation, PMN accumulation, damage/destruction of alveolar epithelial cells, together with release into lung of cytokines/chemokines. High-resolution magnetic resonance imaging demonstrated lung damage, edema and consolidation in histone-injured lungs. These studies confirm the destructive C5a-dependent effects in lung linked to appearance of extracellular histones.

  18. The Nop5-L7A-fibrillarin RNP complex and a novel box C/D containing sRNA of Halobacterium salinarum NRC-1.

    PubMed

    Weisel, Jasmin; Wagner, Steffen; Klug, Gabriele

    2010-04-09

    RNA 2'O-methylation is a frequent modification of rRNA and tRNA and supposed to influence RNA folding and stability. Ribonucleoprotein (RNP) complexes, containing the proteins Nop5, L7A, fibrillarin, and a box C/D sRNA, are guided for 2'O-methylation by interactions of their RNA component with their target RNA. In vitro complex assembly was analyzed for several thermophilic Archaea but in vivo studies are rare, even unavailable for halophilic Archaea. To analyze the putative box C/D RNP complex in the extremely halophilic Halobacterium salinarum NRC-1 we performed pull-down analysis and identified the proteins Nop5, L7A, and fibrillarin and the tRNA(Trp) intron, as a typical box C/D sRNA of this RNP complex in vivo. We show for the first time a ribonucleolytic activity of the purified RNP complex proteins, as well as for the RNP complex containing pull-down fractions. Furthermore, we identified a novel RNA (OE4630R-3'sRNA) as part of the complex, containing the typical boxes C/D and C'/D' sequence motifs and being twice as abundant as the tRNA(Trp) intron. Copyright 2010 Elsevier Inc. All rights reserved.

  19. EMS Student Handbook.

    ERIC Educational Resources Information Center

    Ogle, Patrick

    This student guide is one of a series of self-contained materials for students enrolled in an emergency medical services (EMS) training program. Discussed in the individual sections of the guide are the following topics: the purpose and history of EMS professionals; EMS training, certification and examinations (national and state certification and…

  20. Emergency department crystalloid resuscitation of 1.5 L or more is associated with increased mortality in elderly and nonelderly trauma patients.

    PubMed

    Ley, Eric J; Clond, Morgan A; Srour, Marissa K; Barnajian, Moshe; Mirocha, James; Margulies, Dan R; Salim, Ali

    2011-02-01

    Recent evidence suggests a survival advantage in trauma patients who receive controlled or hypotensive resuscitation volumes. This study examines the threshold crystalloid volume that is an independent risk factor for mortality after trauma. This study analyzed prospectively collected data from a Level I Trauma Center between January 2000 and December 2008. Demographics and outcomes were compared in elderly (≥70 years) and nonelderly (<70 years) trauma patients who received crystalloid fluid in the emergency department (ED) to determine a threshold volume that was an independent predictor for mortality. A total of 3,137 patients who received crystalloid resuscitation in the ED were compared. Overall mortality was 5.2%. Mortality among the elderly population was 17.3% (41 deaths), whereas mortality in the nonelderly population was 4% (116 deaths). After multivariate logistic regression analysis, fluid volumes of 1.5 L or more were significantly associated with mortality in both elderly (odds ratio [OR]: 2.89, confidence interval [CI] [1.13-7.41], p=0.027) and nonelderly patients (OR: 2.09, CI [1.31-3.33], p=0.002). Fluid volumes up to 1 L were not associated with significantly increased mortality. At 3 L, mortality was especially pronounced in the elderly (OR: 8.61, CI [1.55-47.75] p=0.014), when compared with the nonelderly (OR=2.69, CI [1.53-4.73], p=0.0006). ED volume replacement of 1.5 L or more was an independent risk factor for mortality. High-volume resuscitations were associated with high-mortality particularly in the elderly trauma patient. Our finding supports the notion that excessive fluid resuscitation should be avoided in the ED and when required, operative intervention or intensive care admission should be considered.

  1. Speeding up the solar water disinfection process (SODIS) against Cryptosporidium parvum by using 2.5l static solar reactors fitted with compound parabolic concentrators (CPCs).

    PubMed

    Gómez-Couso, H; Fontán-Sainz, M; Fernández-Ibáñez, P; Ares-Mazás, E

    2012-12-01

    Water samples of 0, 5, and 100 nephelometric turbidity units (NTU) spiked with Cryptosporidium parvum oocysts were exposed to natural sunlight in 2.5l static borosilicate solar reactors fitted with two different compound parabolic concentrators (CPCs), CPC1 and CPC1.89, with concentration factors of the solar radiation of 1 and 1.89, respectively. The global oocyst viability was calculated by the evaluation of the inclusion/exclusion of the fluorogenic vital dye propidium iodide and the spontaneous excystation. Thus, the initial global oocyst viability of the C. parvum isolate used was 95.3 ± 1.6%. Using the solar reactors fitted with CPC1, the global viability of oocysts after 12h of exposure was zero in the most turbid water samples (100 NTU) and almost zero in the other water samples (0.3 ± 0.0% for 0 NTU and 0.5 ± 0.2% for 5 NTU). Employing the solar reactors fitted with CPC1.89, after 10h exposure, the global oocyst viability was zero in the non-turbid water samples (0 NTU), and it was almost zero in the 5 NTU water samples after 8h of exposure (0.5 ± 0.5%). In the most turbid water samples (100 NTU), the global viability was 1.9 ± 0.6% after 10 and 12h of exposure. In conclusion, the use of these 2.5l static solar reactors fitted with CPCs significantly improved the efficacy of the SODIS technique as these systems shorten the exposure times to solar radiation, and also minimize the negative effects of turbidity. This technology therefore represents a good alternative method for improving the microbiological quality of household drinking water in developing countries. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Predicting EuroQoL 5 Dimensions 5 Levels (EQ-5D-5L) Utilities from Older People's Quality of Life Brief Questionnaire (OPQoL-Brief) Scores.

    PubMed

    Kaambwa, Billingsley; Ratcliffe, Julie

    2017-06-16

    Economic evaluation of healthcare treatment and services targeted at older people requires measurement of utility-based quality-of-life outcomes but it is not always possible to collect such outcome data. It may, however, be possible to estimate these outcomes using non-utility measures of quality of life where the latter have been collected. The objective of this study was to develop a regression-based algorithm to map a non-utility-based outcome, the Older People's Quality of Life brief questionnaire (OPQoL-brief), onto a utility-based outcome, the EuroQoL 5 Dimensions 5 Levels (EQ-5D-5L). The estimation sample comprised 330 community-based Australian older people (>65 years), while the validation sample consisted of 293 older people from a separate study. Six regression techniques were employed to estimate utilities from OPQoL-brief. The predictive accuracy of 54 regression models (six regression techniques × nine model specifications) was assessed using six criteria: mean absolute error (MAE), root mean squared error (RMSE), correlation, distribution of predicted utilities, distribution of residuals, and proportion of predictions with absolute errors <0.05. The 54 regression models predicted EQ-5D-5L utilities that performed differently when assessed by the six criteria. However, best results were obtained from an ordinary least squares (OLS) model where all 13 OPQoL-brief items were included as continuous variables (OLS 4). RMSE and MAE estimates for this model (0.2201 and 0.1638, respectively) were within the range of published estimates. It is possible to predict valid utilities from OPQoL-brief using regression methods. We recommend OLS model (4) for this exercise.

  3. Dealing with the health state 'dead' when using discrete choice experiments to obtain values for EQ-5D-5L heath states.

    PubMed

    Ramos-Goñi, Juan Manuel; Rivero-Arias, Oliver; Errea, María; Stolk, Elly A; Herdman, Michael; Cabasés, Juan Manuel

    2013-07-01

    To evaluate two different methods to obtain a dead (0)--full health (1) scale for EQ-5D-5L valuation studies when using discrete choice (DC) modeling. The study was carried out among 400 respondents from Barcelona who were representative of the Spanish population in terms of age, sex, and level of education. The DC design included 50 pairs of health states in five blocks. Participants were forced to choose between two EQ-5D-5L states (A and B). Two extra questions concerned whether A and B were considered worse than dead. Each participant performed ten choice exercises. In addition, values were collected using lead-time trade-off (lead-time TTO), for which 100 states in ten blocks were selected. Each participant performed five lead-time TTO exercises. These consisted of DC models offering the health state 'dead' as one of the choices--for which all participants' responses were used (DCdead)--and a model that included only the responses of participants who chose at least one state as worse than dead (WTD) (DCWTD). The study also estimated DC models rescaled with lead-time TTO data and a lead-time TTO linear model. The DC(dead) and DCWTD models produced relatively similar results, although the coefficients in the DCdead model were slightly lower. The DC model rescaled with lead-time TTO data produced higher utility decrements. Lead-time TTO produced the highest utility decrements. The incorporation of the state 'dead' in the DC models produces results in concordance with DC models that do not include 'dead'.

  4. EM International. Volume 1

    SciTech Connect

    Not Available

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  5. Leveraging EMS and VPP

    DTIC Science & Technology

    2009-05-01

    Elements of EMS  International Standards Organization ( ISO ) 14001 , Environmental Management Systems  The Key Elements of EMS: - Policy - Planning...wingman-- ON and OFF duty Fully Conforming vs. Fully Implemented  “Fully Conforming”  Meets standards established in ISO 14001  ESOH council...e n c e Every airman looking out for his wingman-- ON and OFF duty EMS & VPP Commonalities Environmental Management System ISO 14001 : 2004 Voluntary

  6. Development and validation of a real time PCR for the detection of myxoma virus based on the diploid gene M000.5L/R.

    PubMed

    Duarte, Margarida Dias; Barros, Sílvia Carla; Henriques, Ana Margarida; Fagulha, Maria Teresa; Ramos, Fernanda; Luís, Tiago; Fevereiro, Miguel

    2014-02-01

    The myxoma virus (MYXV) causes severe infections in European rabbits that may reach mortality rates up to 100% depending on the viral strain. The typical symptoms and lesions induced by the virus are usually enough to permit the correct clinical diagnosis. However, in peracute forms the infection may be accompanied by unspecific symptoms. Sudden death may also occur without evident clinical signs of myxomatosis. Likewise, a clinical diagnosis of atypical forms of myxomatosis (amyxomatous) is often complicated and delayed due to the scarceness of skin lesions. As the disease control often depends on an early and unequivocal diagnosis of MYXV, laboratorial methods play a relevant role in the confirmation of MYXV infection. This study describes the development and validation of a novel, high accurate real time polymerase chain reaction assay (rtPCR) for the detection of MYXV. Primers were designed to amplify a 125-bp within the gene M000.5L/R, which is duplicated in the termini of the genome and is unique among Leporipoxvirus. The assay was negative for SFV and other poxviruses and was able to detect 2.6 copies of MYXV DNA proving the effectiveness, specificity and sensitivity of this diagnosis tool. The rtPCR has been applied successfully in INIAV laboratory for routine diagnosis of myxomatosis since 2005. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. pH-control modes in a 5-L stirred-tank bioreactor for cell biomass and exopolysaccharide production by Tremella fuciformis spore.

    PubMed

    Zhu, Hu; Cao, Chunxu; Zhang, Shuaishuai; Zhang, Yan; Zou, Weisheng

    2011-10-01

    The effect of pH-control modes on cell growth and exopolysaccharide production by Tremella fuciformis was evaluated in a 5-L bioreactor. The results show that the maximal dry cell weight (DCW) and exopolysaccharide production were 23.57 and 4.48 g L⁻¹ in pH-stat fermentation, where the maximal specific growth rate (μ(max)) and specific production rate of exopolysaccharide (P(P/X)) were 1.03 and 0.24 d⁻¹, respectively; under pH-shift cultivation, the maximal DCW and exopolysaccharide production were 30.57 and 3.90 g L⁻¹, where the μ(max) and P(P/X) were 1.21 and 0.06 d⁻¹. Unlike batch fermentation, maximal DCW and exopolysaccharide production merely reached 15.04 and 2.0 g L⁻¹, where the μ(max) and P(P/X) were 0.86 and 0.05 d⁻¹, respectively. These results suggest that a pH-stat strategy is a more efficient way of performing the fermentation process to increase exopolysaccharide production. Furthermore, this research has also proved that the three-stage pH-control mode is effective for cell growth.

  8. 5L-Scale Magnesio-Milling Reduction of Nanostructured SiO2 for High Capacity Silicon Anodes in Lithium-Ion Batteries.

    PubMed

    Cho, Won Chul; Kim, Hye Jin; Lee, Hae In; Seo, Myung Won; Ra, Ho Won; Yoon, Sang Jun; Mun, Tae Young; Kim, Yong Ku; Kim, Jae Ho; Kim, Bo Hwa; Kook, Jin Woo; Yoo, Chung-Yul; Lee, Jae Goo; Choi, Jang Wook

    2016-11-09

    Nanostructured silicon (Si) is useful in many applications and has typically been synthesized by bottom-up colloid-based solution processes or top-down gas phase reactions at high temperatures. These methods, however, suffer from toxic precursors, low yields, and impractical processing conditions (i.e., high pressure). The magnesiothermic reduction of silicon oxide (SiO2) has also been introduced as an alternative method. Here, we demonstrate the reduction of SiO2 by a simple milling process using a lab-scale planetary-ball mill and industry-scale attrition-mill. Moreover, an ignition point where the reduction begins was consistently observed for the milling processes, which could be used to accurately monitor and control the reaction. The complete conversion of rice husk SiO2 to high purity Si was demonstrated, taking advantage of the rice husk's uniform nanoporosity and global availability, using a 5L-scale attrition-mill. The resulting porous Si showed excellent performance as a Li-ion battery anode, retaining 82.8% of the initial capacity of 1466 mAh g(-1) after 200 cycles.

  9. The TDH-GCN5L1-Fbxo15-KBP axis limits mitochondrial biogenesis in mouse embryonic stem cells.

    PubMed

    Donato, Valerio; Bonora, Massimo; Simoneschi, Daniele; Sartini, Davide; Kudo, Yasusei; Saraf, Anita; Florens, Laurence; Washburn, Michael P; Stadtfeld, Matthias; Pinton, Paolo; Pagano, Michele

    2017-03-20

    Self-renewing naive mouse embryonic stem cells (mESCs) contain few mitochondria, which increase in number and volume at the onset of differentiation. KBP (encoded by Kif1bp) is an interactor of the mitochondrial-associated kinesin Kif1Bα. We found that TDH, responsible for mitochondrial production of acetyl-CoA in mESCs, and the acetyltransferase GCN5L1 cooperate to acetylate Lys501 in KBP, allowing its recognition by and degradation via Fbxo15, an F-box protein transcriptionally controlled by the pluripotency core factors and repressed following differentiation. Defects in KBP degradation in mESCs result in an unscheduled increase in mitochondrial biogenesis, enhanced respiration and ROS production, and inhibition of cell proliferation. Silencing of Kif1Bα reverts the aberrant increase in mitochondria induced by KBP stabilization. Notably, following differentiation, Kif1bp(-/-) mESCs display impaired expansion of the mitochondrial mass and form smaller embryoid bodies. Thus, KBP proteolysis limits the accumulation of mitochondria in mESCs to preserve their optimal fitness, whereas KBP accumulation promotes mitochondrial biogenesis in differentiating cells.

  10. CTNNBL1 is a novel nuclear localization sequence-binding protein that recognizes RNA-splicing factors CDC5L and Prp31.

    PubMed

    Ganesh, Karuna; Adam, Salome; Taylor, Benjamin; Simpson, Paul; Rada, Cristina; Neuberger, Michael

    2011-05-13

    Nuclear proteins typically contain short stretches of basic amino acids (nuclear localization sequences; NLSs) that bind karyopherin α family members, directing nuclear import. Here, we identify CTNNBL1 (catenin-β-like 1), an armadillo motif-containing nuclear protein that exhibits no detectable primary sequence homology to karyopherin α, as a novel, selective NLS-binding protein. CTNNBL1 (a single-copy gene conserved from fission yeast to man) was previously found associated with Prp19-containing RNA-splicing complexes as well as with the antibody-diversifying enzyme AID. We find that CTNNBL1 association with the Prp19 complex is mediated by recognition of the NLS of the CDC5L component of the complex and show that CTNNBL1 also interacts with Prp31 (another U4/U6.U5 tri-snRNP-associated splicing factor) through its NLS. As with karyopherin αs, CTNNBL1 binds NLSs via its armadillo (ARM) domain, but displays a separate, more selective NLS binding specificity. Furthermore, the CTNNBL1/AID interaction depends on amino acids forming the AID conformational NLS with CTNNBL1-deficient cells showing a partial defect in AID nuclear accumulation. However, in further contrast to karyopherin αs, the CTNNBL1 N-terminal region itself binds karyopherin αs (rather than karyopherin β), suggesting a function divergent from canonical nuclear transport. Thus, CTNNBL1 is a novel NLS-binding protein, distinct from karyopherin αs, with the results suggesting a possible role in the selective intranuclear targeting or interactions of some splicing-associated complexes.

  11. Employing quality control and feedback to the EQ-5D-5L valuation protocol to improve the quality of data collection.

    PubMed

    Purba, Fredrick Dermawan; Hunfeld, Joke A M; Iskandarsyah, Aulia; Fitriana, Titi Sahidah; Sadarjoen, Sawitri S; Passchier, Jan; Busschbach, Jan J V

    2017-05-01

    In valuing health states using generic questionnaires such as EQ-5D, there are unrevealed issues with the quality of the data collection. The aims were to describe the problems encountered during valuation and to evaluate a quality control report and subsequent retraining of interviewers in improving this valuation. Data from the first 266 respondents in an EQ-5D-5L valuation study were used. Interviewers were trained and answered questions regarding problems during these initial interviews. Thematic analysis was used, and individual feedback was provided. After completion of 98 interviews, a first quantitative quality control (QC) report was generated, followed by a 1-day retraining program. Subsequently individual feedback was also given on the basis of follow-up QCs. The Wilcoxon signed-rank test was used to assess improvements based on 7 indicators of quality as identified in the first QC and the QC conducted after a further 168 interviews. Interviewers encountered problems in recruiting respondents. Solutions provided were: optimization of the time of interview, the use of broader networks and the use of different scripts to explain the project's goals to respondents. For problems in interviewing process, solutions applied were: developing the technical and personal skills of the interviewers and stimulating the respondents' thought processes. There were also technical problems related to hardware, software and internet connections. There was an improvement in all 7 indicators of quality after the second QC. Training before and during a study, and individual feedback on the basis of a quantitative QC, can increase the validity of values obtained from generic questionnaires.

  12. EMS in the pueblos.

    PubMed

    Vigil, M A

    1994-02-01

    Imagine creating a movie by excerpting scenes from "Dances With Wolves," splicing it with footage from "Code 3" or "Emergency Response" and then flavoring the script with the mystery of a Tony Hillerman novel. A film producer would probably find it quite difficult to choreograph a finished product from such a compilation of material. To hundreds of Native American EMS providers, however, such a movie is played out every day in Indian country. And with this movie come some real-life problems, including trauma, which is the number-one cause of premature death among Native Americans. But a high trauma rate is just one of the challenges facing tribal EMS responders. There's also prolonged response and transport, the problems involved in maintaining the unique culture and standard of care, the challenges of tribal EMS administration and EMS education of Native American students, and the unsure future of Native American EMS. Beyond that, there's the fact that EMS is a s unique to each Indian reservation as are the cultures of the native peoples who reside on these lands. Yet while no two systems are alike, most tribal EMS providers face similar challenges.

  13. A Comparison of the Validity and Responsiveness of the EQ-5D-5L and SF-6D for Measuring Health Spillovers: A Study of the Family Impact of Meningitis.

    PubMed

    Bhadhuri, Arjun; Jowett, Sue; Jolly, Kate; Al-Janabi, Hareth

    2017-05-01

    The "health spillover" of patient illness on family members is important to capture in economic evaluation. This study compares the construct validity and responsiveness of 2 widely used health-related quality-of-life instruments, the EQ-5D-5L and SF-6D, in capturing health spillover effects for family members with and without an informal care role (carers and noncarers). Construct validity and responsiveness were assessed using data from a 2012 UK survey of the family impact of meningitis-related sequelae. Construct validity was assessed by testing associations between family members' health status and variables anticipated to be associated with spillover effects (patient health status and informal care). Responsiveness was assessed by testing associations between the longitudinal change in family members' health status and longitudinal change in patient health and caring hours. Among noncarers, both the EQ-5D-5L and the SF-6D exhibited construct validity with 10 of the 11 associations that were hypothesized being statistically significant on both measures. There was less clear evidence of responsiveness of the measures for noncarers. Among carers, the EQ-5D-5L exhibited greater construct validity, as well as responsiveness, with respect to spillovers from patient health. This was evidenced by the EQ-5D-5L detecting 9 significant associations compared with 4 on the SF-6D. However, the SF-6D exhibited greater construct validity with respect to spillovers generated from informal care provision (5 associations significant compared with 2 on the EQ-5D-5L). Both the EQ-5D-5L and the SF-6D exhibited a degree of validity that could justify their use as measures of health-related quality-of-life spillovers on family members in economic evaluation.

  14. Remagnetization and Cementation of Unconsolidated Sediments in the Mallik 5L-38 Well (Canadian Arctic) by Solute Exclusion During Gas Hydrate Formation

    NASA Astrophysics Data System (ADS)

    Hamilton, T. S.; Enkin, R. J.; Esteban, L.

    2007-05-01

    Bulk magnetic properties provide a sensitive measure of sedimentary diagenesis related to the stability and growth of gas hydrates. The deposit at Mallik (Mackenzie Delta, Canadian Arctic) occurs in unconsolidated Tertiary sands, but is absent in interstratified silt layers. A detailed sampling of the JAPEX/JNOC/GSC Mallik 5L-38 core tested the use of magnetic properties for detecting diagenetic changes related to the hydrate. Petrographic studies reveal that the sands are well sorted and clean, with quartz > chert >> muscovite and little fines content. Excepting a few rare bands of indurated dolomite in the midst of the gas hydrate zone, there is little or no cementation in the sands. Detrital magnetite is the dominant magnetic mineral, comprising up to a few percent of the sand grain population. In contrast, the muddier layers have a somewhat different detrital grain composition, richer in lithic (sedimentary and metamorphic) grains, feldspar, and clays. They are extensively diagenetically altered (to as much as 30- 40%) and cemented with carbonates, clays, chlorite and the iron sulphide greigite (the dominant magnetic mineral). The greigite is recognized by its isotropic creamy-white reflectance, cubic to prismatic habit, and characteristic tarnish to faintly bluish bireflectant mackinawite. Habits range from disseminated cubes and colliform masses to inflationary massive sulphide veins and clots. Rare detrital grains of magnetite were observed among the silt grains, but never in a reaction relationship or overgrown. Instead the greigite has nucleated separately, in tensional fractures and granular masses up to 4 mm across. In this particular sediment sequence, being so quartz and chert rich, there is insufficient local source for the introduced cements (calcite, dolomite, greigite, clays, jarosite), so ions must have been introduced by fluid flow. Magnetic studies reveal a bi-modal character related to the lithology (sands versus silts) and their magnetic

  15. EMS in Mauritius.

    PubMed

    Ramalanjaona, Georges; Brogan, Gerald X

    2009-02-01

    Mauritius lies in the southwest Indian Ocean about 1250 miles from the African coast and 500 miles from Madagascar. Mauritius (estimated population 1,230,602) became independent from the United Kingdom in 1968 and has one of the highest GDP per capita in Africa. Within Mauritius there is a well established EMS system with a single 999 national dispatch system. Ambulances are either publicly or privately owned. Public ambulances are run by the Government (SAMU). Megacare is a private subscriber only ambulance service. The Government has recently invested in new technology such as telemedicine to further enhance the role of EMS on the island. This article describes the current state of EMS in Mauritius and depicts its development in the context of Government effort to decentralise and modernise the healthcare system.

  16. EMS -- Error Message Service

    NASA Astrophysics Data System (ADS)

    Rees, P. C. T.; Chipperfield, A. J.; Draper, P. W.

    This document describes the Error Message Service, EMS, and its use in system software. The purpose of EMS is to provide facilities for constructing and storing error messages for future delivery to the user -- usually via the Starlink Error Reporting System, ERR (see SUN/104). EMS can be regarded as a simplified version of ERR without the binding to any software environment (e.g., for message output or access to the parameter and data systems). The routines in this library conform to the error reporting conventions described in SUN/104. A knowledge of these conventions, and of the ADAM system (see SG/4), is assumed in what follows. This document is intended for Starlink systems programmers and can safely be ignored by applications programmers and users.

  17. National EMS Research Agenda.

    PubMed

    Sayre, M R; White, L J; Brown, L H; McHenry, S D

    2002-01-01

    Now, more than ever before, the spirit of the emergency services professional is recognized by people everywhere. Individuals from every walk of life comprehend the reality of the job these professionals do each day. Placing the safety of others above their own is their acknowledged responsibility. Rescue and treatment of ill and injured patients are their purpose as well as their gratification. The men and women who provide prehospital care are well aware of the unpredictable nature of emergency medical services (EMS). Prehospital care is given when and where it is needed: in urban settings with vertical challenges and gridlock; in rural settings with limited access; in confined spaces; within entrapments; or simply in the street, exposed to the elements. Despite the challenges, EMS professionals rise to the occasion to do their best with the resources available. Despite more than 30 years of dedicated service by thousands of EMS professionals, academic researchers, and public policy makers, the nation's EMS system is treating victims of illness and injury with little or no evidence that the care they provide is optimal. A national investment in the EMS research infrastructure is necessary to overcome obstacles currently impeding the accumulation of essential evidence of the effectiveness of EMS practice. Funding is required to train new researchers and to help them establish their careers. Financial backing is needed to support the development of effective prehospital treatments for the diseases that drive the design of the EMS system, including injury and sudden cardiac arrest. Innovative strategies to make EMS research easier to accomplish in emergency situations must be implemented. Researchers must have access to patient outcome information in order to evaluate and improve prehospital care. New biomedical and technical advances must be evaluated using scientific methodology. Research is the key to maintaining focus on improving the overall health of the

  18. C5a, but not C5a-des Arg, induces upregulation of heteromer formation between complement C5a receptors C5aR and C5L2.

    PubMed

    Croker, Daniel E; Halai, Reena; Fairlie, David P; Cooper, Matthew A

    2013-01-01

    Receptors for C5a have an important role in innate immunity and inflammation where their expression and activation is tightly regulated. There are two known receptors for C5a: the C5a receptor (C5aR) and the C5a receptor like-2 (C5L2) receptor. Here we hypothesized that activation of C5aR might lead to heteromer formation with C5L2, as a downregulatory mechanism for C5aR signaling. To investigate this experimentally, bioluminescent resonance energy transfer (BRET) was implemented and supported by wide-field microscopy to analyze receptor localization in transfected HEK293 cells and human monocyte-derived macrophages (HMDM). BRET experiments indicated the presence of constitutive C5aR-C5L2 heteromers, where C5a, but not C5a-des Arg, was able to induce further heteromer formation, which was inhibited by a C5aR-specific antagonist. The data obtained suggest that C5aR-C5L2 can form heteromers in a process enhanced by C5a, but not by C5a-des Arg. There was also a significant difference in the levels of the anti-inflammatory cytokine IL-10 detected in HMDM following exposure to C5a compared with that seen for C5a-des Arg but no differences in the pro-inflammatory cytokines TNFα and IL-6. These subtle differences in C5a and C5a-des Arg induced receptor function may be of benefit in understanding the regulation of C5a in acute inflammation.

  19. Mapping the functional assessment of cancer therapy-breast (FACT-B) to the 5-level EuroQoL Group's 5-dimension questionnaire (EQ-5D-5L) utility index in a multi-ethnic Asian population.

    PubMed

    Cheung, Yin Bun; Luo, Nan; Ng, Raymond; Lee, Chun Fan

    2014-12-12

    To develop an algorithm for mapping the Functional Assessment of Cancer Therapy-Breast (FACT-B) to the 5-level EuroQoL Group's 5-dimension questionnaire (EQ-5D-5L) utility index. A survey of 238 breast cancer patients in Singapore was conducted. Models using various regression methods with or without recognizing the upper boundary of utility values at 1 were fitted to predict the EQ-5D-5L utility index based on the five subscale scores of the FACT-B. Data from a follow-up survey of these patients were used to validate the results. A model that maps the physical, emotional, functional well-being and the breast cancer concerns subscales of the FACT-B to the EQ-5D-5L utility index was derived. The social well-being subscale was not associated to the utility index. Although theoretical assumptions may not be valid, ordinary least square outperformed other regression methods. The mean predicted utility index within each performance status level at follow-up deviated from the observed mean less than the minimally important difference of EQ-5D for cancer patients. The mapping algorithm converts the FACT-B to the EQ-5D utility index. This enables oncologists, clinical researchers and policy makers to obtain a quantitative utility summary of a patient's health status when only the FACT-B is assessed.

  20. The EM Earthquake Precursor

    NASA Astrophysics Data System (ADS)

    Jones, K. B., II; Saxton, P. T.

    2013-12-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After the 1989 Loma Prieta Earthquake, American earthquake investigators predetermined magnetometer use and a minimum earthquake magnitude necessary for EM detection. This action was set in motion, due to the extensive damage incurred and public outrage concerning earthquake forecasting; however, the magnetometers employed, grounded or buried, are completely subject to static and electric fields and have yet to correlate to an identifiable precursor. Secondly, there is neither a networked array for finding any epicentral locations, nor have there been any attempts to find even one. This methodology needs dismissal, because it is overly complicated, subject to continuous change, and provides no response time. As for the minimum magnitude threshold, which was set at M5, this is simply higher than what modern technological advances have gained. Detection can now be achieved at approximately M1, which greatly improves forecasting chances. A propagating precursor has now been detected in both the field and laboratory. Field antenna testing conducted outside the NE Texas town of Timpson in February, 2013, detected three strong EM sources along with numerous weaker signals. The antenna had mobility, and observations were noted for recurrence, duration, and frequency response. Next, two

  1. EMS & the DEA.

    PubMed

    Beeson, Jeff; Ayres, Chris

    2010-01-01

    It's clear that EMS medical directors and management staff must be vigilant in their oversight of implementation, administration and monitoring of controlled substances within their agencies to best serve the public and avoid running afoul of investigation and incurring significant penalties. Those potentially affected by the need for individual registrations of both emergency vehicles and central inventory systems should carefully monitor upcoming developments in the interpretation od DEA regulations.

  2. The effect of 0.5 L 6% hydroxyethyl starch 130/0.42 versus 1 L Ringer's lactate preload on the hemodynamic status of parturients undergoing spinal anesthesia for elective cesarean delivery using arterial pulse contour analysis.

    PubMed

    Matsota, Paraskevi; Karakosta, Agathi; Pandazi, Ageliki; Niokou, Dimitra; Christodoulaki, Kalliopi; Kostopanagiotou, Georgia

    2015-06-01

    Fluid loading attenuates the hypotensive response to spinal anesthesia (SA). This study aimed to compare the preload efficacy of 0.5 L hydroxyethyl starch (HES) versus 1 L Ringer's lactate (R/L) in the prevention of hypotension after SA for elective cesarean delivery (CD). Assessment of maternal hemodynamic variables using FloTrac/Vigileo™ and neonatal outcome constituted secondary outcomes. Thirty-two ASA I/II parturients scheduled for elective CD were preloaded with either 1 L R/L (Group R/L, n = 16) or 0.5 L HES 6% 130/0.42 (Group T, n = 16) approximately 25 min before SA. Hypotension, defined as a 20% decrease of systolic arterial pressure (SAP) from baseline or SAP <100 mmHg, was treated with vasopressors according to a predetermined algorithm. The overall duration of hypotensive episodes and the total amount of vasopressors administered determined the severity of the hemodynamic instability. The incidence of hypotension was 73.3% in Group R/L and 46.7% in Group T. HES compared to R/L preload was associated with a shorter overall duration of hypotensive episodes (p < 0.001), a significantly less usage of ephedrine and phenylephrine (p = 0.015 and p = 0.029, respectively) and a greater impact, although not statistically significant, on cardiac index (CI) and stroke volume index (SVI). Although no statistical difference was detected between groups over time, there was a significant drop in CI, SVI and SAP within groups (p < 0.001) up to 14 min after SA. No difference was recorded in neonatal outcome. Preloading with 0.5 L HES 130/0.42 produced more stable hemodynamics compared to 1 L R/L solution in obstetric patients.

  3. Corrosion behavior of X-70 pipe steel in near-neutral pH solution

    NASA Astrophysics Data System (ADS)

    Niu, L.; Cheng, Y. F.

    2007-08-01

    The mechanism of near-neutral pH stress corrosion cracking (SCC) of natural gas pipelines has not been well-established since the first accident was found in the 1980s. In particular, the role of hydrogen in near-neutral pH SCC has remained unknown. In this work, cyclic voltammetry was used to comprehensively investigate the fundamentals of the electrochemical corrosion reactions occurring at the steel/solution interface in diluted, 5% CO 2/N 2-purged, near-neutral pH bicarbonate solutions. It is shown that there is no stable oxide film formed on the steel surface in near-neutral pH solution. The dissolution-based cracking mechanism does not apply for near-neutral pH SCC of pipelines. The formation of a metastable Fe(OH) 2 deposit layer shows a catalytic activity on hydrogen evolution reaction, indicating that a significant amount of hydrogen could be generated under near-neutral pH condition. The presence of corrosive anions in the soil electrolyte enhances both the anodic polarization of the steel and the cathodic hydrogen evolution reaction, resulting in an increased hydrogen evolution rate. The introduction of oxygen could form a stable oxide film on the surface of steel, resulting in the loss of the surface catalytic effect on hydrogen evolution reaction. Thus, a hydrogen-based mechanism does not apply for SCC in the presence of oxygen.

  4. Why do Emergency Medical Services (EMS) Professionals Leave EMS?

    PubMed

    Blau, Gary; Chapman, Susan A

    2016-12-01

    The objective was to determine why Emergency Medical Technician (EMT)-Basics and Paramedics leave the Emergency Medical Services (EMS) workforce. Data were collected through annual surveys of nationally registered EMT-Basics and Paramedics from 1999 to 2008. Survey items dealing with satisfaction with the EMS profession, likelihood of leaving the profession, and likelihood of leaving their EMS job were assessed for both EMT-Basics and Paramedics, along with reasons for leaving the profession. Individuals whose responses indicated that they were not working in EMS were mailed a special exit survey to determine the reasons for leaving EMS. The likelihood of leaving the profession in the next year was low for both EMT-Basics and Paramedics. Although overall satisfaction levels with the profession were high, EMT-Basics were significantly more satisfied than Paramedics. The most important reasons for leaving the profession were choosing to pursue further education and moving to a new location. A desire for better pay and benefits was a significantly more important reason for EMT-Paramedics' exit decisions than for EMT-Basics. Given the anticipated increased demand for EMS professionals in the next decade, continued study of issues associated with retention is strongly recommended. Some specific recommendations and suggestions for promoting retention are provided. Blau G , Chapman SA . Why do Emergency Medical Services (EMS) professionals leave EMS? Prehosp Disaster Med. 2016;31(Suppl. 1):s105-s111.

  5. Identified EM Earthquake Precursors

    NASA Astrophysics Data System (ADS)

    Jones, Kenneth, II; Saxton, Patrick

    2014-05-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After a number of custom rock experiments, two hypotheses were formed which could answer the EM wave model. The first hypothesis concerned a sufficient and continuous electron movement either by surface or penetrative flow, and the second regarded a novel approach to radio transmission. Electron flow along fracture surfaces was determined to be inadequate in creating strong EM fields, because rock has a very high electrical resistance making it a high quality insulator. Penetrative flow could not be corroborated as well, because it was discovered that rock was absorbing and confining electrons to a very thin skin depth. Radio wave transmission and detection worked with every single test administered. This hypothesis was reviewed for propagating, long-wave generation with sufficient amplitude, and the capability of penetrating solid rock. Additionally, fracture spaces, either air or ion-filled, can facilitate this concept from great depths and allow for surficial detection. A few propagating precursor signals have been detected in the field occurring with associated phases using custom-built loop antennae. Field testing was conducted in Southern California from 2006-2011, and outside the NE Texas town of Timpson in February, 2013. The antennae have mobility and observations were noted for

  6. Addressing case specific biogas plant tasks: industry oriented methane yields derived from 5L Automatic Methane Potential Test Systems in batch or semi-continuous tests using realistic inocula, substrate particle sizes and organic loading.

    PubMed

    Kolbl, Sabina; Paloczi, Attila; Panjan, Jože; Stres, Blaž

    2014-02-01

    The primary aim of the study was to develop and validate an in-house upscale of Automatic Methane Potential Test System II for studying real-time inocula and real-scale substrates in batch, codigestion and enzyme enhanced hydrolysis experiments, in addition to semi-continuous operation of the developed equipment and experiments testing inoculum functional quality. The successful upscale to 5L enabled comparison of different process configurations in shorter preparation times with acceptable accuracy and high-through put intended for industrial decision making. The adoption of the same scales, equipment and methodologies in batch and semi-continuous tests mirroring those at full scale biogas plants resulted in matching methane yields between the two laboratory tests and full-scale, confirming thus the increased decision making value of the approach for industrial operations.

  7. EPA LABORATORIES IMPLEMENT EMS PROGRAM

    EPA Science Inventory

    This paper highlights the breadth and magnitude of carrying out an effective Environmental Management System (EMS) program at the U.S. EPA's research and development laboratories. Federal research laboratories have unique operating challenges compared to more centralized industr...

  8. Busca de estruturas em grandes escalas em altos redshifts

    NASA Astrophysics Data System (ADS)

    Boris, N. V.; Sodrã©, L., Jr.; Cypriano, E.

    2003-08-01

    A busca por estruturas em grandes escalas (aglomerados de galáxias, por exemplo) é um ativo tópico de pesquisas hoje em dia, pois a detecção de um único aglomerado em altos redshifts pode por vínculos fortes sobre os modelos cosmológicos. Neste projeto estamos fazendo uma busca de estruturas distantes em campos contendo pares de quasares próximos entre si em z Â3 0.9. Os pares de quasares foram extraídos do catálogo de Véron-Cetty & Véron (2001) e estão sendo observados com os telescópios: 2,2m da University of Hawaii (UH), 2,5m do Observatório de Las Campanas e com o GEMINI. Apresentamos aqui a análise preliminar de um par de quasares observado nos filtros i'(7800 Å) e z'(9500 Å) com o GEMINI. A cor (i'-z') mostrou-se útil para detectar objetos "early-type" em redshifts menores que 1.1. No estudo do par 131046+0006/J131055+0008, com redshift ~ 0.9, o uso deste método possibilitou a detecção de sete objetos candidatos a galáxias "early-type". Num mapa da distribuição projetada dos objetos para 22 < i' < 25 observou-se que estas galáxias estão localizadas próximas a um dos quasares e há indícios de que estejam aglomeradas dentro de um área de ~ 6 arcmin2. Se esse for o caso, estes objetos seriam membros de uma estrutura em grande escala. Um outro argumento em favor dessa hipótese é que eles obedecem uma relação do tipo Kormendy (raio equivalente X brilho superficial dentro desse raio), como a apresentada pelas galáxias elípticas em z = 0.

  9. MCDHF and RCI calculations of energy levels, lifetimes and transition rates for 3l3l', 3l4l', and 3s5l states in Ca IX - As XXII and Kr XXV

    NASA Astrophysics Data System (ADS)

    Gustafsson, S.; Jönsson, P.; Froese Fischer, C.; Grant, I. P.

    2017-01-01

    Multiconfiguration Dirac-Hartree-Fock (MCDHF) calculations and relativistic configuration interaction (RCI) calculations were performed for states of the 3l3l', 3l4l' and 3s5l configurations in the Mg-like ions Ca IX - As XXII and Kr XXV. Valence and core-valence electron correlation effects are accounted for through large configuration state function expansions. Calculated excitation energies are in very good agreement with observations for the lowest levels. For higher lying levels observations are often missing and present energies aid line identification in spectra. Lifetimes and transition data are given for all ions. There is an excellent agreement for both lifetimes and transition data with recent multiconfiguration Hartree-Fock Breit Pauli calculations. Tables for energy levels, lifetimes, and transition data and full Tables 2, 4, and 6 are available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/597/A76

  10. The European Mobile System (EMS)

    NASA Technical Reports Server (NTRS)

    Jongejans, A.; Rogard, R.; Mistretta, I.; Ananasso, F.

    1993-01-01

    The European Space Agency is presently procuring an L band payload in order to promote a regional European L band system coping with the specific needs of the European market. The payload, and the two communications systems to be supported, are described below. The potential market for EMS in Europe is discussed.

  11. Using open hole and cased-hole resistivity logs to monitor gas hydrate dissociation during a thermal test in the mallik 5L-38 research well, Mackenzie Delta, Canada

    USGS Publications Warehouse

    Anderson, B.I.; Collett, T.S.; Lewis, R.E.; Dubourg, I.

    2008-01-01

    Gas hydrates, which are naturally occurring ice-like combinations of gas and water, have the potential to provide vast amounts of natural gas from the world's oceans and polar regions. However, producing gas economically from hydrates entails major technical challenges. Proposed recovery methods such as dissociating or melting gas hydrates by heating or depressurization are currently being tested. One such test was conducted in northern Canada by the partners in the Mallik 2002 Gas Hydrate Production Research Well Program. This paper describes how resistivity logs were used to determine the size of the annular region of gas hydrate dissociation that occurred around the wellbore during the thermal test in the Mallik 5L-38 well. An open-hole logging suite, run prior to the thermal test, included array induction, array laterolog, nuclear magnetic resonance and 1.1-GHz electromagnetic propagation logs. The reservoir saturation tool was run both before and after the thermal test to monitor formation changes. A cased-hole formation resistivity log was run after the test.Baseline resistivity values in each formation layer (Rt) were established from the deep laterolog data. The resistivity in the region of gas hydrate dissociation near the wellbore (Rxo) was determined from electromagnetic propagation and reservoir saturation tool measurements. The radius of hydrate dissociation as a function of depth was then determined by means of iterative forward modeling of cased-hole formation resistivity tool response. The solution was obtained by varying the modeled dissociation radius until the modeled log overlaid the field log. Pretest gas hydrate production computer simulations had predicted that dissociation would take place at a uniform radius over the 13-ft test interval. However, the post-test resistivity modeling showed that this was not the case. The resistivity-derived dissociation radius was greatest near the outlet of the pipe that circulated hot water in the wellbore

  12. Cosmic muon induced EM showers in NO$\

    SciTech Connect

    Yadav, Nitin; Duyang, Hongyue; Shanahan, Peter; Mishra, Sanjib; Bhuyan, Bipul

    2016-11-15

    Here, the NuMI Off-Axis ve Appearance (NOvA) experiment is a ne appearance neutrino oscillation experiment at Fermilab. It identifies the ne signal from the electromagnetic (EM) showers induced by the electrons in the final state of neutrino interactions. Cosmic muon induced EM showers, dominated by bremsstrahlung, are abundant in NOvA far detector. We use the Cosmic Muon- Removal technique to get pure EM shower sample from bremsstrahlung muons in data. We also use Cosmic muon decay in flight EM showers which are highly pure EM showers.The large Cosmic-EM sample can be used, as data driven method, to characterize the EM shower signature and provides valuable checks of the simulation, reconstruction, particle identification algorithm, and calibration across the NOvA detector.

  13. Correlation of the NBME advanced clinical examination in EM and the national EM M4 exams.

    PubMed

    Hiller, Katherine; Miller, Emily S; Lawson, Luan; Wald, David; Beeson, Michael; Heitz, Corey; Morrissey, Thomas; House, Joseph; Poznanski, Stacey

    2015-01-01

    Since 2011 two online, validated exams for fourth-year emergency medicine (EM) students have been available (National EM M4 Exams). In 2013 the National Board of Medical Examiners offered the Advanced Clinical Examination in Emergency Medicine (EM-ACE). All of these exams are now in widespread use; however, there are no data on how they correlate. This study evaluated the correlation between the EM-ACE exam and the National EM M4 Exams. From May 2013 to April 2014 the EM-ACE and one version of the EM M4 exam were administered sequentially to fourth-year EM students at five U.S. medical schools. Data collected included institution, gross and scaled scores and version of the EM M4 exam. We performed Pearson's correlation and random effects linear regression. 305 students took the EM-ACE and versions 1 (V1) or 2 (V2) of the EM M4 exams (281 and 24, respectively) [corrected].The mean percent correct for the exams were as follows: EM-ACE 74.9 (SD-9.82), V1 83.0 (SD-6.39), V2 78.5 (SD-7.70) [corrected]. Pearson's correlation coefficient for the V1/EM-ACE was 0.53 (0.43 scaled) and for the V2/EM-ACE was 0.58 (0.41 scaled) [corrected]. The coefficient of determination for V1/ EM-ACE was 0.73 and for V2/EM-ACE 0.71 (0.65 and .49 for scaled scores) [ERRATUM]. The R-squared values were 0.28 and 0.30 (0.18 and 0.13 scaled), respectively [corrected]. There was significant cluster effect by institution. There was moderate positive correlation of student scores on the EM-ACE exam and the National EM M4 Exams.

  14. Complaints against an EMS system.

    PubMed

    Colwell, Christopher B; Pons, Peter T; Pi, Randy

    2003-11-01

    Complaints against Emergency Medical Services (EMS) agencies represent a concerning and potentially time-consuming problem for all involved in the delivery of prehospital emergency medical care. The objective of this study was to identify the source of complaints against an EMS system to help focus quality and performance improvement and customer service efforts. We conducted a retrospective review of complaints filed against a busy urban EMS agency over a 6-year period. All complaints were included, totaled by season and by year, and categorized by originator and nature of the complaint. A total of 286 complaints were registered during the 6-year period, with an average of 48 per year and 9.3 per 10,000 responses. The most common originators of complaints were patients (53%) followed by medical personnel (19%) and family members or friends (12%). Rude behavior accounted for 23% of the complaints registered, followed by technical skills (20%), transport problems (18%), and loss of belongings (13%). The identification of areas of dissatisfaction will allow focused quality and performance improvement programs directed at customer service and risk management.

  15. Cosmic muon induced EM showers in NO$$\

    DOE PAGES

    Yadav, Nitin; Duyang, Hongyue; Shanahan, Peter; ...

    2016-11-15

    Here, the NuMI Off-Axis ve Appearance (NOvA) experiment is a ne appearance neutrino oscillation experiment at Fermilab. It identifies the ne signal from the electromagnetic (EM) showers induced by the electrons in the final state of neutrino interactions. Cosmic muon induced EM showers, dominated by bremsstrahlung, are abundant in NOvA far detector. We use the Cosmic Muon- Removal technique to get pure EM shower sample from bremsstrahlung muons in data. We also use Cosmic muon decay in flight EM showers which are highly pure EM showers.The large Cosmic-EM sample can be used, as data driven method, to characterize the EMmore » shower signature and provides valuable checks of the simulation, reconstruction, particle identification algorithm, and calibration across the NOvA detector.« less

  16. Kinetic model of Chlorella vulgaris growth with and without extremely low frequency-electromagnetic fields (EM-ELF).

    PubMed

    Beruto, Dario T; Lagazzo, Alberto; Frumento, Davide; Converti, Attilio

    2014-01-01

    Chlorella vulgaris was grown in two bench-scale photobioreactors with and without the application of a low intensity, low frequency electromagnetic field (EM-ELF) of about 3mT. Cell concentration and tendency of cells to form aggregates inside the reactor were recorded over a 30 days-time period at 0.5L-constant medium volume in the temperature range 289-304K. At 304K, after a cultivation period of 15 days, the rate of cell death became predominant over that of growth. In the temperature range 289-299K, a two step-kinetic model based on the mitotic division and the clusterization processes was developed and critically discussed. The best-fitted curves turned out to have a sigmoid shape, and the competition between mitosis and clusterization was investigated. Without EM-ELF, the temperature dependence of the specific rate constant of the mitotic step yielded an apparent total enthalpy of 15±6kJmol(-1), whose value was not influenced by the EM-ELF application. The electromagnetic field was shown to exert a significant effect on the exothermic clusterization step. The heat exchange due to binding between cells and liquid medium turned out to be -44±5kJmol(-1) in the absence of EM-ELF and -68±8kJmol(-1) when it was active. Optical microscopy observations were in agreement with the model predictions and confirmed that EM-ELF was able to enhance cell clusterization.

  17. The Empathic Operating System (emOS)

    DTIC Science & Technology

    2016-06-15

    The Empathic Operating System ( emOS ) Physiological measurements have typically been limited to expensive and cumbersome clinical research equipment...Report: The Empathic Operating System ( emOS ) Report Title Physiological measurements have typically been limited to expensive and cumbersome clinical...C-0043 Proposal number: 62850-LS-DRP Project title: “The Empathic Operating System ( emOS )” Contract performance period: January 1, 2016 – April 7

  18. DOE/EM Criticality Safety Needs Assessment

    SciTech Connect

    Westfall, Robert Michael; Hopper, Calvin Mitchell

    2011-02-01

    The issue of nuclear criticality safety (NCS) in Department of Energy Environmental Management (DOE/EM) fissionable material operations presents challenges because of the large quantities of material present in the facilities and equipment that are committed to storage and/or material conditioning and dispositioning processes. Given the uncertainty associated with the material and conditions for many DOE/EM fissionable material operations, ensuring safety while maintaining operational efficiency requires the application of the most-effective criticality safety practices. In turn, more-efficient implementation of these practices can be achieved if the best NCS technologies are utilized. In 2002, DOE/EM-1 commissioned a survey of criticality safety technical needs at the major EM sites. These needs were documented in the report Analysis of Nuclear Criticality Safety Technology Supporting the Environmental Management Program, issued May 2002. Subsequent to this study, EM safety management personnel made a commitment to applying the best and latest criticality safety technology, as described by the DOE Nuclear Criticality Safety Program (NCSP). Over the past 7 years, this commitment has enabled the transfer of several new technologies to EM operations. In 2008, it was decided to broaden the basis of the EM NCS needs assessment to include not only current needs for technologies but also NCS operational areas with potential for improvements in controls, analysis, and regulations. A series of NCS workshops has been conducted over the past years, and needs have been identified and addressed by EM staff and contractor personnel. These workshops were organized and conducted by the EM Criticality Safety Program Manager with administrative and technical support by staff at Oak Ridge National Laboratory (ORNL). This report records the progress made in identifying the needs, determining the approaches for addressing these needs, and assimilating new NCS technologies into EM

  19. EMS provider determinations of necessity for transport and reimbursement for EMS response, medical care, and transport: combined resource document for the National Association of EMS Physicians position statements.

    PubMed

    Millin, Michael G; Brown, Lawrence H; Schwartz, Brian

    2011-01-01

    With increasing demands for emergency medical services (EMS), many EMS jurisdictions are utilizing EMS provider-initiated nontransport policies as a method to offload potentially nonemergent patients from the EMS system. EMS provider determination of medical necessity, resulting in nontransport of patients, has the potential to avert unnecessary emergency department visits. However, EMS systems that utilize these policies must have additional education for the providers, a quality improvement process, and active physician oversight. In addition, EMS provider determination of nontransport for a specific situation should be supported by evidence in the peer-reviewed literature that the practice is safe. Further, EMS systems that do not utilize these programs should not be financially penalized. Payment for EMS services should be based on the prudent layperson standard. EMS systems that do utilize nontransport policies should be appropriately reimbursed, as this represents potential cost savings to the health care system.

  20. School Budget Hold'em Facilitator's Guide

    ERIC Educational Resources Information Center

    Education Resource Strategies, 2012

    2012-01-01

    "School Budget Hold'em" is a game designed to help school districts rethink their budgeting process. It evolved out of Education Resource Strategies' (ERS) experience working with large urban districts around the country. "School Budget Hold'em" offers a completely new approach--one that can turn the budgeting process into a long-term visioning…

  1. Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-Wire Tandem Submerged Arc Welding

    NASA Astrophysics Data System (ADS)

    Mohammadijoo, Mohsen; Kenny, Stephen; Collins, Laurie; Henein, Hani; Ivey, Douglas G.

    2017-03-01

    High-strength low-carbon microalloyed steels may be adversely affected by the high-heat input and thermal cycle that they experience during tandem submerged arc welding. The heat-affected zone (HAZ), particularly the coarse-grained heat-affected zone (CGHAZ), i.e., the region adjacent to the fusion line, has been known to show lower fracture toughness compared with the rest of the steel. The deterioration in toughness of the CGHAZ is attributed to the formation of martensite-austenite (M-A) constituents, local brittle zones, and large prior austenite grains (PAG). In the present work, the influence of the addition of a cold wire at various wire feed rates in cold-wire tandem submerged arc welding, a recently developed welding process for pipeline manufacturing, on the microstructure and mechanical properties of the HAZ of a microalloyed steel has been studied. The cold wire moderates the heat input of welding by consuming the heat of the trail electrode. Macrostructural analysis showed a decrease in the CGHAZ size by addition of a cold wire. Microstructural evaluation, using both tint etching optical microscopy and scanning electron microscopy, indicated the formation of finer PAGs and less fraction of M-A constituents with refined morphology within the CGHAZ when the cold wire was fed at 25.4 cm/min. This resulted in an improvement in the HAZ impact fracture toughness. These improvements are attributed to lower actual heat introduced to the weldment and lower peak temperature in the CGHAZ by cold-wire addition. However, a faster feed rate of the cold wire at 76.2 cm/min adversely affected the toughness due to the formation of slender M-A constituents caused by the relatively faster cooling rate in the CGHAZ.

  2. Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-Wire Tandem Submerged Arc Welding

    NASA Astrophysics Data System (ADS)

    Mohammadijoo, Mohsen; Kenny, Stephen; Collins, Laurie; Henein, Hani; Ivey, Douglas G.

    2017-05-01

    High-strength low-carbon microalloyed steels may be adversely affected by the high-heat input and thermal cycle that they experience during tandem submerged arc welding. The heat-affected zone (HAZ), particularly the coarse-grained heat-affected zone (CGHAZ), i.e., the region adjacent to the fusion line, has been known to show lower fracture toughness compared with the rest of the steel. The deterioration in toughness of the CGHAZ is attributed to the formation of martensite-austenite (M-A) constituents, local brittle zones, and large prior austenite grains (PAG). In the present work, the influence of the addition of a cold wire at various wire feed rates in cold-wire tandem submerged arc welding, a recently developed welding process for pipeline manufacturing, on the microstructure and mechanical properties of the HAZ of a microalloyed steel has been studied. The cold wire moderates the heat input of welding by consuming the heat of the trail electrode. Macrostructural analysis showed a decrease in the CGHAZ size by addition of a cold wire. Microstructural evaluation, using both tint etching optical microscopy and scanning electron microscopy, indicated the formation of finer PAGs and less fraction of M-A constituents with refined morphology within the CGHAZ when the cold wire was fed at 25.4 cm/min. This resulted in an improvement in the HAZ impact fracture toughness. These improvements are attributed to lower actual heat introduced to the weldment and lower peak temperature in the CGHAZ by cold-wire addition. However, a faster feed rate of the cold wire at 76.2 cm/min adversely affected the toughness due to the formation of slender M-A constituents caused by the relatively faster cooling rate in the CGHAZ.

  3. EM Cep: The Be Star

    NASA Astrophysics Data System (ADS)

    Kochiashvili, N.; Kochiashvili, I.; Natsvlishvili, R.; Vardosanidze, M.; Beradze, S.

    2017-07-01

    On the basis of UBVR photometric data, obtained in the Abastumani Observatory during 1991-1999, very interesting and unusual flare of EM Cep has been revealed. Duration of the flare was over two hours. We estimated the percentage of brightness increase during the flare and brightness decrease of the corresponding anti- flare and the minimum amount of the lost mass during this event. We have solved the light curves of the star using the Wilson-Devinney code. But the resulting fraction of calculated brightness of the companion star was not in accordance with spectral data. Then we decided to check the idea of a pulsating single star using new spectral data. Together with our Buyrakan colleagues we obtained and analyzed spectra of the star. We could not find spectral lines of a companion star or any traces of the radial velocities using this data. Hence, we concluded that we need the higher resolution spectra for final resolution of the matter. On the basis of the latest spectral data of Bulgarian astronomers they concluded that EM Cep is a single star. This makes it possible to suggest, that the question of stellar pulsation could be solved using additional photometric observations.

  4. The EM algorithm in medical imaging.

    PubMed

    Kay, J

    1997-03-01

    This article outlines the statistical developments that have taken place in the use of the EM algorithm in emission and transmission tomography during the past decade or so. We discuss the statistical aspects of the modelling of the projection data for both the emission and transmission cases and define the relevant probability models. This leads to the use of the method of maximum likelihood as a means of estimating the relevant unknown parameters within a given region of a patient's body and to the use of the EM algorithm to compute the reconstruction. Various different types of EM algorithm are discussed, including the SAGE algorithms of Fessler and Hero. The limitations of the EM algorithm, per se, are covered and the need for regularization is stressed. A number of different methods for penalizing the likelihood are described and a number of algorithms for the computation of the penalized EM reconstruction are discussed.

  5. Side mounted EMS for aluminium scrap melters

    SciTech Connect

    Eidem, M.; Tallbaeck, G.; Hanley, P.J.

    1996-10-01

    Normally the electromagnetic stirrer (EMS) is placed below the furnace. However it has recently been found that the EMS can also be placed at the side of the furnace, still giving good stirring. This makes it possible to install EMS on most existing furnaces. The side-mounted EMS is compared with the standard bottom-mounted stirrer with respect to installation, melting time and flow pattern in the melt. The major conclusion is that a side-mounted EMS is practical and will give about as good a performance as the bottom-mounted. Melting time estimates are based upon 3-D fluid flow and heat transfer predictions in combination with a simplified scrap melting theory. Predicted melting times are in fair agreement with operational data for mechanically stirred and electromagnetically bottom stirred furnaces.

  6. EM International, July 1994, Volume 2

    SciTech Connect

    Not Available

    1994-10-01

    The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM`s mandate to protect public health and the environment through the safe and cost-effective remediation of the Department`s nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM`s objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities.

  7. Project X RFQ EM Design

    SciTech Connect

    Romanov, Gennady; Hoff, Matthew; Li, Derun; Staples, John; Virostek, Steve; /LBNL

    2012-05-09

    Project X is a proposed multi-MW proton facility at Fermi National Accelerator Laboratory (FNAL). The Project X front-end would consist of an H- ion source, a low-energy beam transport (LEBT), a CW 162.5 MHz radio-frequency quadrupole (RFQ) accelerator, and a medium-energy beam transport (MEBT). Lawrence Berkeley National Laboratory (LBNL) and FNAL collaboration is currently developing the designs for various components in the Project X front end. This paper reports the detailed EM design of the CW 162.5 MHz RFQ that provides bunching of the 1-10 mA H- beam with acceleration from 30 keV to 2.1 MeV.

  8. NEIC Environmental Management System (EMS) Policy

    EPA Pesticide Factsheets

    National Enforcement Investigations Center (NEIC) Environmental Management System (EMS) Policy. Identification and management of actual and potential environmental impacts of operations and decisions for the purpose of continual improvement of performance

  9. EMS offshore. A new horizon for paramedics.

    PubMed

    Mallard, A S

    1991-10-01

    The difficulty in getting medical aid to offshore drilling platforms can be a source of life-threatening delays. Recently, some companies have charted new waters by actually stationing EMS crews on their rigs.

  10. How good can cryo-EM become?

    SciTech Connect

    Glaeser, Robert M.

    2015-12-30

    The suddenness with which single-particle cryo-electron microscopy (cryo-EM) has emerged as a method for determining high-resolution structures of biological macromolecules invites the questions, how much better can this technology get, and how fast is that likely to happen? While we can rightly celebrate the maturation of cryo-EM as a high-resolution structure-determination tool, I believe there still are many developments to look forward to.

  11. Reassessing training levels for prehospital EMS personnel.

    PubMed

    Briese, G L

    1983-01-01

    One of the major questions confronting prehospital care services today concerns determining the appropriate level of training for EMS personnel that will provide the most cost effective systems. Unfortunately there are no studies which assess this problem. Various communities have modified or expanded the roles of prehospital personnel beyond the traditional training of EMTs and paramedics. Continuing education and skills maintenance are ongoing problems faced by all EMS systems, which have been addressed in various ways by individual locales.

  12. SOFIS FTS EM test results

    NASA Astrophysics Data System (ADS)

    Soucy, Marc-Andre A.; Levesque, Luc E.; Tanii, Jun; Kawashima, Takahiro; Nakajima, Hideaki

    2003-04-01

    The Solar Occultation FTS for Inclined-orbit Satellite (SOFIS) is a solar occultation Fourier transform spectrometer developed by the Ministry of the Environment (MOE) in Japan for the Global Change Observation Mission-A1 (GCOM-A1) satellite. GCOM-A1 will be placed in a 650 km non-sun-synchronous orbit, with an inclination angle of 69 degrees. ABB-Bomem is a sub-contractor of NTSpace (NEC-Toshiba Space) for the design and manufacturing of the FTS Engineering Model of SOFIS. SOFIS measures the vertical profile of the atmospheric constituents with 0.2 cm-1 spectral resolution for the spectral range covering 3-13 μm. The atmospheric vertical resolution of SOFIS is 1 km. The target of SOFIS measurements is a global distribution of O3, HNO3, NO2, N2O, CH4, H2O, CO2, CFC-11, CFC-12, ClONO2, aerosol extinction, atmospheric pressure and temperature. NTSpace in Japan is the prime contractor of SOFIS. The spectrometer is an adapted version of the classical Michelson interferometer using an optimized optical layout and moving retro-reflectors. A solid-state laser diode operating at 1550 nm is used as metrology source of the interferometer. Its highly folded optical design results in a high performance instrument with a compact size. SOFIS FTS implements high performance control techniques to achieve outstanding speed stability of the moving mechanism. This paper describes the test activities of the SOFIS-FTS Engineering Model (EM) and preliminary results. The performances of the FTS are presented in terms of key parameters like signal-to-noise ratio, modulation efficiency and stability. Spectra acquired are shown and test methodology and analyses are presented. Lessons learned during assembly, integration and testing are described as well as improvements planned to be implemented in the Flight Model.

  13. EMS adaptation for climate change

    NASA Astrophysics Data System (ADS)

    Pan, C.; Chang, Y.; Wen, J.; Tsai, M.

    2010-12-01

    The purpose of this study was to find an appropriate scenario of pre-hospital transportation of an emergency medical service (EMS) system for burdensome casualties resulting from extreme climate events. A case of natural catastrophic events in Taiwan, 88 wind-caused disasters, was reviewed and analyzed. A sequential-conveyance method was designed to shorten the casualty transportation time and to promote the efficiency of ambulance services. A proposed mobile emergency medical center was first constructed in a safe area, but nearby the disaster area. The Center consists of professional medical personnel who process the triage of incoming patients and take care of casualties with minor injuries. Ambulances in the Center were ready to sequentially convey the casualties with severer conditions to an assigned hospital that is distant from the disaster area for further treatment. The study suggests that if we could construct a spacious and well-equipped mobile emergency medical center, only a small portion of casualties would need to be transferred to distant hospitals. This would reduce the over-crowding problem in hospital ERs. First-line ambulances only reciprocated between the mobile emergency medical center and the disaster area, saving time and shortening the working distances. Second-line ambulances were highly regulated between the mobile emergency medical center and requested hospitals. The ambulance service of the sequential-conveyance method was found to be more efficient than the conventional method and was concluded to be more profitable and reasonable on paper in adapting to climate change. Therefore, additional practical work should be launched to collect more precise quantitative data.

  14. Filter banks and the EM algorithm

    SciTech Connect

    Mair, B.A.; Carroll, R.B.; Anderson, J.M.M.

    1996-12-31

    In this paper, we present a wavelet based modification of the ML-EM algorithm for reconstructing positron emission tomography images. By using the filter bank implementation of the wavelet transform, this algorithm has the flexibility to incorporate a priori information, while maintaining the same computational complexity as the standard ML-EM algorithm. Thus, it has a significant computational advantage over usual Bayesian methods. It differs from recent wavelet-based Bayesian methods as it achieves {open_quotes}regularization{close_quotes} by an adaptive, wavelet-based method of thresholding which minimizes Stein`s Unbiased Estimate of Risk. The basic method consists of applying Donoho and Johnstone`s SureShrink wavelet denoising of the Poisson data, and then applying the standard ML-EM algorithm to the denoised data. A more elaborate method is discussed in which a wavelet denoising step is inserted after each EM iteration. This technique differs from previous smoothing techniques applied to the ML-EM algorithm since it is able to recover edges in discontinuous images.

  15. Processing of Cryo-EM Movie Data.

    PubMed

    Ripstein, Z A; Rubinstein, J L

    2016-01-01

    Direct detector device (DDD) cameras dramatically enhance the capabilities of electron cryomicroscopy (cryo-EM) due to their improved detective quantum efficiency (DQE) relative to other detectors. DDDs use semiconductor technology that allows micrographs to be recorded as movies rather than integrated individual exposures. Movies from DDDs improve cryo-EM in another, more surprising, way. DDD movies revealed beam-induced specimen movement as a major source of image degradation and provide a way to partially correct the problem by aligning frames or regions of frames to account for this specimen movement. In this chapter, we use a self-consistent mathematical notation to explain, compare, and contrast several of the most popular existing algorithms for computationally correcting specimen movement in DDD movies. We conclude by discussing future developments in algorithms for processing DDD movies that would extend the capabilities of cryo-EM even further. © 2016 Elsevier Inc. All rights reserved.

  16. 7 CFR 1945.35 - Special EM loan training.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... workshop and a test. (c) Objective. The basic objective of this training program is to keep State and... kit, will be used for the EM loan training meetings, and any subsequent EM loan training...

  17. 7 CFR 1945.35 - Special EM loan training.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... workshop and a test. (c) Objective. The basic objective of this training program is to keep State and... kit, will be used for the EM loan training meetings, and any subsequent EM loan training...

  18. Integrating Green Purchasing Into Your Environmental Management System (EMS)

    EPA Pesticide Factsheets

    The goal of this report is to help Federal facilities integrate green purchasing into their EMS. The intended audience includes those tasked with implementing an EMS, reducing environmental impacts, meeting green purchasing requirements.

  19. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  20. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52 ...

  1. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52 ...

  2. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52 ...

  3. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52 ...

  4. Risk Communication Within the EM Program

    SciTech Connect

    Edelson, M.

    2003-02-26

    The U.S. Department of Energy Environmental Management program (EM) conducts the most extensive environmental remediation effort in the world. The annual EM budgets have exceeded $6,000,000,000 for approximately ten years and EM has assumed responsibility for the cleanup of the largest DOE reservations (i.e., at Hanford, Washington, Aiken, South Carolina, and Idaho Falls, Idaho) as well as the facilities at Rocky Flats, Colorado and in Ohio. Each of these sites has areas of extensive radioactive and chemical contamination, numerous surplus facilities that require decontamination and removal, while some have special nuclear material that requires secure storage. The EM program has been criticized for being ineffective (1) and has been repeatedly reorganized to address perceived shortcomings. The most recent reorganization was announced in 2001 to become effective at the beginning of the 2003 Federal Fiscal Year (i.e., October 2002). It was preceded by a ''top to bottom'' review (TTBR) of the program (2) that identified several deficiencies that were to be corrected as a result of the reorganization. One prominent outcome of the TTBR was the identification of ''risk reduction'' as an organizing principle to prioritize the activities of the new EM program. The new program also sought to accelerate progress by identifying a set of critical activities at each site that could be accelerated and result in more rapid site closure, with attendant risk, cost, and schedule benefits. This paper investigates how the new emphasis on risk reduction in the EM program has been communicated to EM stakeholders and regulators. It focuses on the Rocky Flats Environmental Technology Site (RFETS) as a case study and finds that there is little evidence for a new emphasis on risk reduction in EM communications with RFETS stakeholders. Discussions between DOE and RFETS stakeholders often refer to ''risk,'' but the word serves as a placeholder for other concepts. Thus ''risk'' communication

  5. Structural Composites With Tuned EM Chirality

    DTIC Science & Technology

    2014-12-23

    AFRL-OSR-VA-TR-2015-0018 STRUCTURAL COMPOSITES WITH TUNED EM CHIRALITY Siavouche Nemat Nasser UNIVERSITY OF CALIFORNIA SAN DIEGO Final Report 12/23...REPORT Grant/Contract  Title:        STRUCTURAL  COMPOSITES  WITH  TUNED  EM   CHIRALITY     Grant  No.:  FA9550-­‐09-­‐1...structural   composites  with   tunable   chiral   elements   has   produced   some   impressive   results   in   the

  6. Lessons Learned: Integrating EMS and Environmental Compliance Auditing

    DTIC Science & Technology

    2009-05-06

    audit an EMS against the – ISO 14001 :2004 Standard – Installation’s own commitments and procedures established under their EMS (i.e. are they doing...what they said they would do?) – Army Policy • Findings are documented in a Word report (external audits) • ISO 14001 conformance is determined by...regulatory requirements • EMS Findings – Conformance: management system conforms to ISO 14001 standard – Major Nonconformance: EMS is missing element

  7. Which Questionnaire Should Be Used to Measure Quality-of-Life Utilities in Patients with Acute Leukemia? An Evaluation of the Validity and Interpretability of the EQ-5D-5L and Preference-Based Questionnaires Derived from the EORTC QLQ-C30.

    PubMed

    van Dongen-Leunis, Annemieke; Redekop, W Ken; Uyl-de Groot, Carin A

    The aim of this study was to assess the validity and interpretability of different preference-based questionnaires (generic 5-level EuroQol five-dimensional questionnaire [EQ-5D-5L], cancer-specific Quality of Life Questionnaire Preference-Based Measure, and European Organization of Randomized Controlled Trials 8 Dimension [EORTC-8D]) in patients with acute leukemia. Patients who participated in Hemato-Oncologie voor Volwassenen Nederland (HOVON - the Haemato Oncology Foundation for Adults in the Netherlands) clinical trials between 1999 and 2011 at a single hospital were invited to complete the questionnaires. Interpretability was evaluated by the frequency of incomplete data and highest and lowest possible scores. Content validity was evaluated by exploring the health-related quality-of-life domains included in the questionnaires. Construct validity was assessed using correlations with other quality-of-life scales (EQ-visual analogue scale score and global quality-of-life scale of the EORTC Quality of Life Questionnaire) and ability to distinguish between patients with different health statuses. Questionnaires were returned by 89% (111 of 125) of the patients. Six to seven respondents did not return full questionnaires. Perfect health on the EQ-5D-5L was reported by 32 respondents and many of them (N = 17) did report health problems on other questionnaires. All questionnaires were strongly correlated (range 0.61-0.78) with other quality-of-life scales and yielded substantially different utility values for patients with different health statuses. Nevertheless, the disease-specific preference-based questionnaires showed greater discriminatory power. Although the Quality of Life Questionnaire Preference-Based Measure and the EORTC-8D appear to have better validity, this study does not provide any strong evidence against the use of the EQ-5D-5L for measuring quality-of-life utilities in acute leukemia. However, our findings need to be confirmed in larger longitudinal

  8. Do earthquakes generate EM signals?

    NASA Astrophysics Data System (ADS)

    Walter, Christina; Onacha, Stephen; Malin, Peter; Shalev, Eylon; Lucas, Alan

    2010-05-01

    study areas, large swarms of earthquakes were located very close to the electromagnetic coils. This abstract focuses on the data from the Wairakei area. Preliminary data analysis has been carried out by band pass filtering and removing of the harmonics of the 50 Hz power line frequency. The initial results clearly show that electromagnetic signals accompany the seismic P and S waves (coseismic signal). Further data analysis involves the extraction of the seismoelectric signal generated at the onset of the earthquake and at interfaces from the coseismic signal and other ‘noise' sources. This processing step exhibits a major challenge in seismoelectric data processing. Unlike in other studies we measured the EM field and the seismic field at one location. Therefore the seismoelectric wave travelling at the speed of light cannot be determined as easily in the arrival times as when an array of coils is used. This makes the determination of the origin time much more difficult. Hence other processing techniques need to be explored.

  9. EMS response to an airliner crash.

    PubMed

    Dasgupta, Shuvra; French, Simone; Williams-Johnson, Jean; Hutson, Rhonda; Hart, Nicole; Wong, Mark; Williams, Eric; Espinosa, Kurdell; Maycock, Celeste; Edwards, Romayne; McCartney, Trevor; Cawich, Shamir; Crandon, Ivor

    2012-06-01

    This report of an aircraft crash at a major airport in Kingston, Jamaica examines the response of the local Emergency Medical Services (EMS). Factors that impacted the response are discussed, and the need for more disaster simulation exercises is highlighted. The objective of this case report was to document the response of EMS personnel to the crash of American Airlines Flight 331, and to utilize the information to examine and improve the present protocol. While multiple errors can occur during a mass-casualty event, these can be reduced by frequent simulation exercises during which various personnel practice and learn designated roles. Efficient triage, proper communication, and knowledge of the roles are important in ensuring the best possible outcome. While the triage system and response of the EMS personnel were effective for this magnitude of catastrophe, more work is needed in order to meet predetermined standards. Ways in which this can be overcome include: (1) hosting more disaster simulation exercises; (2) encouraging more involvement with first responders; and (3) strengthening the links in the local EMS system. Vigorous public education must be instituted and maintained.

  10. Navigating 3D electron microscopy maps with EM-SURFER.

    PubMed

    Esquivel-Rodríguez, Juan; Xiong, Yi; Han, Xusi; Guang, Shuomeng; Christoffer, Charles; Kihara, Daisuke

    2015-05-30

    The Electron Microscopy DataBank (EMDB) is growing rapidly, accumulating biological structural data obtained mainly by electron microscopy and tomography, which are emerging techniques for determining large biomolecular complex and subcellular structures. Together with the Protein Data Bank (PDB), EMDB is becoming a fundamental resource of the tertiary structures of biological macromolecules. To take full advantage of this indispensable resource, the ability to search the database by structural similarity is essential. However, unlike high-resolution structures stored in PDB, methods for comparing low-resolution electron microscopy (EM) density maps in EMDB are not well established. We developed a computational method for efficiently searching low-resolution EM maps. The method uses a compact fingerprint representation of EM maps based on the 3D Zernike descriptor, which is derived from a mathematical series expansion for EM maps that are considered as 3D functions. The method is implemented in a web server named EM-SURFER, which allows users to search against the entire EMDB in real-time. EM-SURFER compares the global shapes of EM maps. Examples of search results from different types of query structures are discussed. We developed EM-SURFER, which retrieves structurally relevant matches for query EM maps from EMDB within seconds. The unique capability of EM-SURFER to detect 3D shape similarity of low-resolution EM maps should prove invaluable in structural biology.

  11. The association between EMS workplace safety culture and safety outcomes.

    PubMed

    Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

    2012-01-01

    Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

  12. The association between EMS workplace safety culture and safety outcomes

    PubMed Central

    Weaver, Matthew D.; Wang, Henry E.; Fairbanks, Rollin J.; Patterson, Daniel

    2012-01-01

    Objective Prior studies have highlighted wide variation in EMS workplace safety culture across agencies. We sought to determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. Methods We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, perceptions of working conditions, stress recognition, and job satisfaction. A panel of medical directors, paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Results Sixteen percent of all respondents reported experiencing an injury in the past 3 months, four of every 10 respondents reported an error or adverse event (AE), and 90% reported safety-compromising behaviors. Respondents reporting injury scored lower on 5 of the 6 domains of safety culture. Respondents reporting an error or AE scored lower for 4 of the 6 domains, while respondents reporting safety-compromising behavior had lower safety culture scores for 5 of 6 domains. Conclusions Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes. PMID:21950463

  13. Accuracy of EMS Trauma Transport Destination Plans in North Carolina.

    PubMed

    Moss, Chailee; Cowden, Christopher S; Atterton, Laurie Meyer; Arasaratnam, Meredith H; Fernandez, Antonio R; Evarts, Jeff S; Barrier, Brian; Lerner, E Brooke; Mann, N Clay; Lohmeier, Chad; Shofer, Frances S; Brice, Jane H

    2015-01-01

    Abstract Objective. Planning for time-sensitive injury may allow emergency medical services (EMS) systems to more accurately triage patients meeting accepted criteria to facilities most capable of providing life-saving treatment. In 2010, North Carolina (NC) implemented statewide Trauma Triage and Destination Plans (TTDPs) in all 100 of North Carolina's county-defined EMS systems. Each system was responsible for identifying the specific destination hospitals with appropriate resources to treat trauma patients. We sought to characterize the accuracy of their hospital designations. Methods. In this cross-sectional study, we collected TTDPs for each county-defined EMS system, including their assigned hospital capabilities (i.e., trauma center or community hospital). We conducted a survey with each EMS system to determine how their TTDP was constructed and maintained, as well as with each TTDP-designated hospital to verify their capabilities. We determined the accuracy of the EMS assigned hospital designations by comparing them to the hospital's reported capabilities. Results. The 100 NC EMS systems provided 380 designations for 112 hospitals. TTDPs were created by EMS administrators and medical directors, with only 55% of EMS systems engaging a hospital representative in the plan creation. Compared to the actual hospital capabilities, 97% of the EMS TTDP designations were correct. Twelve hospital designations were incorrect and the majority (10) overestimated hospital capabilities. Of the 100 EMS systems, 7 misclassified hospitals in their TTDP. EMS systems that did not verify their local hospitals' capabilities during TTDP development were more likely to incorrectly categorize a hospital's capabilities (p = 0.001). Conclusions. A small number of EMS systems misclassified hospitals in their TTDP, but most plans accurately reflected hospital capabilities. Misclassification occurred more often in systems that did not consult local hospitals prior to developing their

  14. What Do They Want from Us? A Survey of EM Program Directors on EM Application Criteria

    PubMed Central

    King, Kevin; Kass, Dara

    2017-01-01

    Introduction Although a relatively young specialty, emergency medicine (EM) is popular among medical students and is one of the most competitive large specialties. Consequently, students increasingly seek more opportunity to differentiate themselves from their colleagues by pursuing more clerkships at the cost of taking out additional loans: this despite the fact that those who match in EM typically do so in their top three choices. We sought to ascertain what factors EM program directors seek in their typical candidate. Methods We recruited EM program directors via the Council of Emergency Medicine Residency Directors email listserv to participate in an anonymous survey regarding the United States Medical Licensing Examination (USMLE), the number of standardized letters of evaluation (SLOE), and the number of EM rotations during the fourth year. Results 135 respondents completed the anonymous survey: 59% of respondents stated their program did not have a minimum USMLE Step 1 score, but 39% reported a minimum score of 210 or higher; 95% of programs do not require Step 2 to grant an interview, but 46% require it to place the student on the rank list; 80% require only one EM rotation to grant an interview and none require more than two; 95% of programs will accept two SLOEs for both application and rank list placement. Conclusion For the typical EM applicant, there is likely little benefit to performing more than two rotations and obtaining more than two SLOEs. Students can defer USMLE Step 2 but must complete it by the time rank lists are due. Our study was limited by the anonymity of the survey, and comments by the respondents revealed the questions did not account for some nuances programs apply to their application review process. PMID:28116023

  15. The E-MS Algorithm: Model Selection with Incomplete Data.

    PubMed

    Jiang, Jiming; Nguyen, Thuan; Rao, J Sunil

    2015-04-04

    We propose a procedure associated with the idea of the E-M algorithm for model selection in the presence of missing data. The idea extends the concept of parameters to include both the model and the parameters under the model, and thus allows the model to be part of the E-M iterations. We develop the procedure, known as the E-MS algorithm, under the assumption that the class of candidate models is finite. Some special cases of the procedure are considered, including E-MS with the generalized information criteria (GIC), and E-MS with the adaptive fence (AF; Jiang et al. 2008). We prove numerical convergence of the E-MS algorithm as well as consistency in model selection of the limiting model of the E-MS convergence, for E-MS with GIC and E-MS with AF. We study the impact on model selection of different missing data mechanisms. Furthermore, we carry out extensive simulation studies on the finite-sample performance of the E-MS with comparisons to other procedures. The methodology is also illustrated on a real data analysis involving QTL mapping for an agricultural study on barley grains.

  16. The E-MS Algorithm: Model Selection with Incomplete Data

    PubMed Central

    Jiang, Jiming; Nguyen, Thuan; Rao, J. Sunil

    2014-01-01

    We propose a procedure associated with the idea of the E-M algorithm for model selection in the presence of missing data. The idea extends the concept of parameters to include both the model and the parameters under the model, and thus allows the model to be part of the E-M iterations. We develop the procedure, known as the E-MS algorithm, under the assumption that the class of candidate models is finite. Some special cases of the procedure are considered, including E-MS with the generalized information criteria (GIC), and E-MS with the adaptive fence (AF; Jiang et al. 2008). We prove numerical convergence of the E-MS algorithm as well as consistency in model selection of the limiting model of the E-MS convergence, for E-MS with GIC and E-MS with AF. We study the impact on model selection of different missing data mechanisms. Furthermore, we carry out extensive simulation studies on the finite-sample performance of the E-MS with comparisons to other procedures. The methodology is also illustrated on a real data analysis involving QTL mapping for an agricultural study on barley grains. PMID:26783375

  17. Applying Recursive EM to Scene Segmentation

    NASA Astrophysics Data System (ADS)

    Bachmann, Alexander

    In this paper a novel approach for the interdependent task of multiple object tracking and scene segmentation is presented. The method partitions a stereo image sequence of a dynamic 3-dimensional (3D) scene into its most prominent moving groups with similar 3D motion. The unknown set of motion parameters is recursively estimated using an iterated extended Kalman filter (IEKF) which will be derived from the expectation-maximization (EM) algorithm. The EM formulation is used to incorporate a probabilistic data association measure into the tracking process. In a subsequent segregation step, each image point is assigned to the object hypothesis with maximum a posteriori (MAP) probability. Within the association process, which is implemented as labeling problem, a Markov Random Field (MRF) is used to express our expectations on spatial continuity of objects.

  18. Intense EM filamentation in relativistic hot plasmas

    NASA Astrophysics Data System (ADS)

    Hu, Qiang-Lin; Chen, Zhong-Ping; Mahajan, Swadesh M.

    2017-03-01

    Through 2D particle-in-cell (PIC) simulations, we demonstrate that the nature of filamentation of a high intensity electromagnetic (EM) pulse propagating in an underdense plasma, is profoundly affected at relativistically high temperatures. The "relativistic" filaments are sharper, are dramatically extended (along the direction of propagation), and live much longer than their lower temperature counterparts. The thermally boosted electron inertia is invoked to understand this very interesting and powerful phenomenon.

  19. Cryo-EM: Spinning the Micelles Away.

    PubMed

    Singh, Satinder K; Sigworth, Fred J

    2015-09-01

    Structural characterization of integral membrane proteins (MPs) demands that the samples be pure, monodisperse, and stable. Detergents are required to extract MPs from the lipid bilayer in which they reside and to stabilize them for downstream biophysical analyses. Some of the best MP-stabilizing detergents pose problems for cryo-EM studies, but in this issue of Structure, Hauer et al. (2015) now offer a solution called GraDeR.

  20. Leukocyte Recognition Using EM-Algorithm

    NASA Astrophysics Data System (ADS)

    Colunga, Mario Chirinos; Siordia, Oscar Sánchez; Maybank, Stephen J.

    This document describes a method for classifying images of blood cells. Three different classes of cells are used: Band Neutrophils, Eosinophils and Lymphocytes. The image pattern is projected down to a lower dimensional sub space using PCA; the probability density function for each class is modeled with a Gaussian mixture using the EM-Algorithm. A new cell image is classified using the maximum a posteriori decision rule.

  1. TandEM: Titan and Enceladus mission

    NASA Astrophysics Data System (ADS)

    Coustenis, A.; Atreya, S. K.; Balint, T.; Brown, R. H.; Dougherty, M. K.; Ferri, F.; Fulchignoni, M.; Gautier, D.; Gowen, R. A.; Griffith, C. A.; Gurvits, L. I.; Jaumann, R.; Langevin, Y.; Leese, M. R.; Lunine, J. I.; McKay, C. P.; Moussas, X.; Müller-Wodarg, I.; Neubauer, F.; Owen, T. C.; Raulin, F.; Sittler, E. C.; Sohl, F.; Sotin, C.; Tobie, G.; Tokano, T.; Turtle, E. P.; Wahlund, J.-E.; Waite, J. H.; Baines, K. H.; Blamont, J.; Coates, A. J.; Dandouras, I.; Krimigis, T.; Lellouch, E.; Lorenz, R. D.; Morse, A.; Porco, C. C.; Hirtzig, M.; Saur, J.; Spilker, T.; Zarnecki, J. C.; Choi, E.; Achilleos, N.; Amils, R.; Annan, P.; Atkinson, D. H.; Bénilan, Y.; Bertucci, C.; Bézard, B.; Bjoraker, G. L.; Blanc, M.; Boireau, L.; Bouman, J.; Cabane, M.; Capria, M. T.; Chassefière, E.; Coll, P.; Combes, M.; Cooper, J. F.; Coradini, A.; Crary, F.; Cravens, T.; Daglis, I. A.; de Angelis, E.; de Bergh, C.; de Pater, I.; Dunford, C.; Durry, G.; Dutuit, O.; Fairbrother, D.; Flasar, F. M.; Fortes, A. D.; Frampton, R.; Fujimoto, M.; Galand, M.; Grasset, O.; Grott, M.; Haltigin, T.; Herique, A.; Hersant, F.; Hussmann, H.; Ip, W.; Johnson, R.; Kallio, E.; Kempf, S.; Knapmeyer, M.; Kofman, W.; Koop, R.; Kostiuk, T.; Krupp, N.; Küppers, M.; Lammer, H.; Lara, L.-M.; Lavvas, P.; Le Mouélic, S.; Lebonnois, S.; Ledvina, S.; Li, J.; Livengood, T. A.; Lopes, R. M.; Lopez-Moreno, J.-J.; Luz, D.; Mahaffy, P. R.; Mall, U.; Martinez-Frias, J.; Marty, B.; McCord, T.; Menor Salvan, C.; Milillo, A.; Mitchell, D. G.; Modolo, R.; Mousis, O.; Nakamura, M.; Neish, C. D.; Nixon, C. A.; Nna Mvondo, D.; Orton, G.; Paetzold, M.; Pitman, J.; Pogrebenko, S.; Pollard, W.; Prieto-Ballesteros, O.; Rannou, P.; Reh, K.; Richter, L.; Robb, F. T.; Rodrigo, R.; Rodriguez, S.; Romani, P.; Ruiz Bermejo, M.; Sarris, E. T.; Schenk, P.; Schmitt, B.; Schmitz, N.; Schulze-Makuch, D.; Schwingenschuh, K.; Selig, A.; Sicardy, B.; Soderblom, L.; Spilker, L. J.; Stam, D.; Steele, A.; Stephan, K.; Strobel, D. F.; Szego, K.; Szopa, C.; Thissen, R.; Tomasko, M. G.; Toublanc, D.; Vali, H.; Vardavas, I.; Vuitton, V.; West, R. A.; Yelle, R.; Young, E. F.

    2009-03-01

    TandEM was proposed as an L-class (large) mission in response to ESA’s Cosmic Vision 2015-2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini-Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini-Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (Montgolfière) and possibly several landing probes to be delivered through the atmosphere.

  2. TandEM: Titan and Enceladus mission

    USGS Publications Warehouse

    Coustenis, A.; Atreya, S.K.; Balint, T.; Brown, R.H.; Dougherty, M.K.; Ferri, F.; Fulchignoni, M.; Gautier, D.; Gowen, R.A.; Griffith, C.A.; Gurvits, L.I.; Jaumann, R.; Langevin, Y.; Leese, M.R.; Lunine, J.I.; McKay, C.P.; Moussas, X.; Muller-Wodarg, I.; Neubauer, F.; Owen, T.C.; Raulin, F.; Sittler, E.C.; Sohl, F.; Sotin, Christophe; Tobie, G.; Tokano, T.; Turtle, E.P.; Wahlund, J.-E.; Waite, J.H.; Baines, K.H.; Blamont, J.; Coates, A.J.; Dandouras, I.; Krimigis, T.; Lellouch, E.; Lorenz, R.D.; Morse, A.; Porco, C.C.; Hirtzig, M.; Saur, J.; Spilker, T.; Zarnecki, J.C.; Choi, E.; Achilleos, N.; Amils, R.; Annan, P.; Atkinson, D.H.; Benilan, Y.; Bertucci, C.; Bezard, B.; Bjoraker, G.L.; Blanc, M.; Boireau, L.; Bouman, J.; Cabane, M.; Capria, M.T.; Chassefiere, E.; Coll, P.; Combes, M.; Cooper, J.F.; Coradini, A.; Crary, F.; Cravens, T.; Daglis, I.A.; de Angelis, E.; De Bergh, C.; de Pater, I.; Dunford, C.; Durry, G.; Dutuit, O.; Fairbrother, D.; Flasar, F.M.; Fortes, A.D.; Frampton, R.; Fujimoto, M.; Galand, M.; Grasset, O.; Grott, M.; Haltigin, T.; Herique, A.; Hersant, F.; Hussmann, H.; Ip, W.; Johnson, R.; Kallio, E.; Kempf, S.; Knapmeyer, M.; Kofman, W.; Koop, R.; Kostiuk, T.; Krupp, N.; Kuppers, M.; Lammer, H.; Lara, L.-M.; Lavvas, P.; Le, Mouelic S.; Lebonnois, S.; Ledvina, S.; Li, Ji; Livengood, T.A.; Lopes, R.M.; Lopez-Moreno, J. -J.; Luz, D.; Mahaffy, P.R.; Mall, U.; Martinez-Frias, J.; Marty, B.; McCord, T.; Salvan, C.M.; Milillo, A.; Mitchell, D.G.; Modolo, R.; Mousis, O.; Nakamura, M.; Neish, Catherine D.; Nixon, C.A.; Mvondo, D.N.; Orton, G.; Paetzold, M.; Pitman, J.; Pogrebenko, S.; Pollard, W.; Prieto-Ballesteros, O.; Rannou, P.; Reh, K.; Richter, L.; Robb, F.T.; Rodrigo, R.; Rodriguez, S.; Romani, P.; Bermejo, M.R.; Sarris, E.T.; Schenk, P.; Schmitt, B.; Schmitz, N.; Schulze-Makuch, D.; Schwingenschuh, K.; Selig, A.; Sicardy, B.; Soderblom, L.; Spilker, L.J.; Stam, D.; Steele, A.; Stephan, K.; Strobel, D.F.; Szego, K.; Szopa,

    2009-01-01

    TandEM was proposed as an L-class (large) mission in response to ESA's Cosmic Vision 2015-2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini-Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini-Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (Montgolfi??re) and possibly several landing probes to be delivered through the atmosphere. ?? Springer Science + Business Media B.V. 2008.

  3. The US DOE EM international program

    SciTech Connect

    Elmetti, Rosa R.; Han, Ana M.; Roach, Jay A.

    2013-07-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eight international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into the remainder of FY 2013 and beyond. (authors)

  4. 2. HI PAR (ACQUISITION RADAR) TOWER AND ENLISTED MEN (EM) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. HI PAR (ACQUISITION RADAR) TOWER AND ENLISTED MEN (EM) BARRACKS WITH RADAR ATTACHED. - Nike Hercules Missile Battery Summit Site, Battery Control Administration & Barracks Building, Anchorage, Anchorage, AK

  5. The State of Emergency Medical Services (EMS) Systems in Africa.

    PubMed

    Mould-Millman, Nee-Kofi; Dixon, Julia M; Sefa, Nana; Yancey, Arthur; Hollong, Bonaventure G; Hagahmed, Mohamed; Ginde, Adit A; Wallis, Lee A

    2017-02-23

    Introduction Little is known about the existence, distribution, and characteristics of Emergency Medical Services (EMS) systems in Africa, or the corresponding epidemiology of prehospital illness and injury.

  6. Recruitment and retention in rural and urban EMS: results from a national survey of local EMS directors.

    PubMed

    Freeman, Victoria A; Slifkin, Rebecca T; Patterson, P Daniel

    2009-01-01

    Maintaining an adequate staff is a challenge for rural emergency medical services (EMS) providers. This national survey of local EMS directors finds that rural EMS are more likely to be freestanding, that is, not affiliated with other public services, to employ only emergency medical technician-basics (EMT-Bs), and to be all volunteer. Rural EMS directors are more likely than urban ones to report that they are not currently fully staffed. The most common barriers to recruitment of EMTs in both urban and rural areas include unwillingness of community members to volunteer and lack of certified EMTs in the area. In rural areas, barriers to EMT training were noted more often than in urban areas as was the lack of employer support for employee volunteers. Similar rural training barriers affected retention of staff. Rural respondents reported that they lose staff to burnout and to difficulty in meeting continuing education requirements. Among rural respondents, those who direct all-volunteer EMS were the most likely to report recruitment and retention problems. The results suggest areas for further study including how volunteer EMS agencies can transition to paid agencies, how to bring EMS education to rural areas, and how EMS can work with other agencies to ensure EMS viability.

  7. Communication - An Effective Tool for Implementing ISO 14001/EMS

    SciTech Connect

    Rachel Damewood; Bowen Huntsman

    2004-04-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) received ISO 14001/EMS certification in June 2002. Communication played an effective role in implementing ISO 14001/EMS at the INEEL. This paper describes communication strategies used during the implementation and certification processes. The INEEL achieved Integrated Safety Management System (ISMS) and Voluntary Protection Program (VPP) Star status in 2001. ISMS implemented a formal process to plan and execute work. VPP facilitated worker involvement by establishing geographic units at various facilities with employee points of contact and management champions. The INEEL Environmental Management System (EMS) was developed to integrate the environmental functional area into its ISMS and VPP. Since the core functions of ISMS, VPP, and EMS are interchangeable, they were easy to integrate. Communication is essential to successfully implement an EMS. (According to ISO 14001 requirements, communication interacts with 12 other elements of the requirements.) We developed communication strategies that integrated ISMS, VPP, and EMS. For example, the ISMS, VPP, and EMS Web sites communicated messages to the work force, such as “VPP emphasizes the people side of doing business, ISMS emphasizes the system side of doing business, and EMS emphasizes the systems to protect the environment; but they all define work, identify and analyze hazards, and mitigate the hazards.” As a result of this integration, the work force supported and implemented the EMS. In addition, the INEEL established a cross-functional communication team to assist with implementing the EMS. The team included members from the Training and Communication organizations, VPP office, Pollution Prevention, Employee and Media Relations, a union representative, facility environmental support, and EMS staff. This crossfunctional team used various communication strategies to promote our EMS to all organization levels and successfully implemented EMS

  8. Improving Emergency Medical Services (EMS) in the United States Through Improved and Centralized Federal Coordination

    DTIC Science & Technology

    2011-03-01

    other emergencies. 4 • Public Awareness of the EMS Discipline. The public at large is not aware of the EMS structure in its community or at a higher...regard for its imperative role in community service. For this reason, placing EMS under the USFA at the federal level would cause EMS to still be...service to include EMS is appropriate, and in some cases, it is not. Not all communities have a dedicated fire service, which can make EMS provision

  9. EM threat analysis for wireless systems.

    SciTech Connect

    Burkholder, R. J. (Ohio State University Electroscience Laboratory); Mariano, Robert J.; Schniter, P. (Ohio State University Electroscience Laboratory); Gupta, I. J. (Ohio State University Electroscience Laboratory)

    2006-06-01

    Modern digital radio systems are complex and must be carefully designed, especially when expected to operate in harsh propagation environments. The ability to accurately predict the effects of propagation on wireless radio performance could lead to more efficient radio designs as well as the ability to perform vulnerability analyses before and after system deployment. In this report, the authors--experts in electromagnetic (EM) modeling and wireless communication theory--describe the construction of a simulation environment that is capable of quantifying the effects of wireless propagation on the performance of digital communication.

  10. Association between EMS Question Bank Completion and Passing Rates on the EMS Certification Examination.

    PubMed

    Clemency, Brian; Martin-Gill, Christian; Rall, Nicole; May, Paul; Lubin, Jeffrey; Cooley, Craig; Van Dillen, Christine; Silvestri, Salvatore; Portela, Roberto; Cooney, Derek; Knutsen, Christian; March, Juan

    2017-01-01

    A board review question bank was created to assist candidates in their preparation for the 2015 EMS certification examination. We aimed to describe the development of this question bank and evaluate its successes in preparing candidates to obtain EMS subspecialty board certification. An online question bank was developed by 13 subject matter experts who participated as item writers, representing eight different EMS fellowship programs. The online question bank consisted of four practice tests, with each of the tests comprised of 100 questions. The number of candidates who participated in and completed the question bank was calculated. The passing rate among candidates who completed the question bank was calculated and compared to the publicly reported statistics for all candidates. The relationship between candidates' performance on the question bank and subspecialty exam pass rates was determined. A total of 252 candidates took at least one practice test and, of those, 225 candidates completed all four 100-question practice tests. The pass rate on the 2015 EMS certification exam was 79% (95%CI 74-85%) among candidates who completed the question bank, which is 12% higher than the overall pass rate (p = 0.003). Candidates' performance on the question bank was positively associated with overall success on the exam (X(2) = 75.8, p < 0.0001). Achieving a score of ≥ 70% on the question bank was associated with a higher likelihood of passing the exam (OR = 17.8; 95% CI: 8.0-39.6). Completing the question bank program was associated with improved pass rates on the EMS certification exam. Strong performance on the question bank correlated with success on the exam.

  11. Light curve analysis of southern eclipsing binary EM Car

    NASA Astrophysics Data System (ADS)

    Ćiçek, C.; Bulut, I.; Bulut, A.

    2017-02-01

    In this study, ASAS light curve of the eclipsing binary EM Car (Sp = O8V, P = 3.4 days) has been analyzed using the Wilson-Devinney method. The light curve analyses have found that EM Car is a detached eclipsing binary system with small eccentric orbit

  12. Genetic-based EM algorithm for learning Gaussian mixture models.

    PubMed

    Pernkopf, Franz; Bouchaffra, Djamel

    2005-08-01

    We propose a genetic-based expectation-maximization (GA-EM) algorithm for learning Gaussian mixture models from multivariate data. This algorithm is capable of selecting the number of components of the model using the minimum description length (MDL) criterion. Our approach benefits from the properties of Genetic algorithms (GA) and the EM algorithm by combination of both into a single procedure. The population-based stochastic search of the GA explores the search space more thoroughly than the EM method. Therefore, our algorithm enables escaping from local optimal solutions since the algorithm becomes less sensitive to its initialization. The GA-EM algorithm is elitist which maintains the monotonic convergence property of the EM algorithm. The experiments on simulated and real data show that the GA-EM outperforms the EM method since: 1) We have obtained a better MDL score while using exactly the same termination condition for both algorithms. 2) Our approach identifies the number of components which were used to generate the underlying data more often than the EM algorithm.

  13. CryoEM at IUCrJ: a new era

    PubMed Central

    Subramaniam, Sriram; Kühlbrandt, Werner; Henderson, Richard

    2016-01-01

    In this overview, we briefly outline recent advances in electron cryomicroscopy (cryoEM) and explain why the journal IUCrJ, published by the International Union of Crystallography, could provide a natural home for publications covering many present and future developments in the cryoEM field. PMID:26870375

  14. 7 CFR 759.6 - EM to be made available.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... natural disaster has occurred in a county, resulting in severe physical losses. If the FSA Administrator determines that such a natural disaster has occurred, then EM can be made available to eligible farmers for... AGRICULTURE SPECIAL PROGRAMS DISASTER DESIGNATIONS AND NOTIFICATIONS § 759.6 EM to be made available. (a)...

  15. 7 CFR 759.6 - EM to be made available.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... natural disaster has occurred in a county, resulting in severe physical losses. If the FSA Administrator determines that such a natural disaster has occurred, then EM can be made available to eligible farmers for... AGRICULTURE SPECIAL PROGRAMS DISASTER DESIGNATIONS AND NOTIFICATIONS § 759.6 EM to be made available. (a)...

  16. The Post-LBV Supernova 2001em

    NASA Astrophysics Data System (ADS)

    Van Dyk, Schuyler D.; Chornock, R.; Filippenko, A. V.; Foley, R. J.; Lewin, W. H. G.; Li, W.; Panagia, N.; Pooley, D.; Stockdale, C. J.; Weiler, K. W.

    2009-12-01

    The supernova (SN) 2001em in UGC 11794 was classified early as Type Ib/c, i.e., as one arising from a hydrogen-stripped star. As part of a radio survey with the Very Large Array of SNe Ib/c at late times (Stockdale et al. 2003, BAAS, 35, 1346), SN 2001em was detected as a highly luminous radio source ˜2 years after explosion. The SN was also subsequently discovered with Chandra to be a very luminous X-ray source. The properties of both the radio and X-ray emission are more characteristic of the Type II-narrow (IIn) SNe, where the SN shock is interacting with dense, massive circumstellar matter, resulting in bright radio synchrotron emission and thermal bremsstrahlung from the interaction region. In fact, SN 2001em has shown to have spectroscopically transformed to a SN IIn. The premise that this might indicate an off-axis gamma-ray burst has been presented (Granot & Ramirez-Ruiz 2004, ApJ, 609, L9) and later, rather convincingly, refuted (e.g., Schinzel et al. 2009, ApJ, 691, 1380). Chugai & Chevalier (2006, ApJ, 641, 1051) have interpreted the spectral transformation and radio/X-ray emission as the SN shock overtaking the detached hydrogen envelope of the progenitor star, which was shed in a superwind episode many years prior to explosion. Chevalier (2007, RMxAC, 30, 41) has further pointed to the required mass-loss rate in the event being equivalent to what would occur in the eruption of a luminous blue variable (LBV). The optical (ground-based and HST) and radio/X-ray data, together with mid-infrared Spitzer observations, tend to support this scenario of a very massive star that experienced a powerful LBV outburst prior to explosion. Such an event may not be unique, with possible parallels in the cases of SNe 2005bf and 2006jc, and may provide valuable new information about massive stellar evolution.

  17. Refinement of atomic models in high resolution EM reconstructions using Flex-EM and local assessment.

    PubMed

    Joseph, Agnel Praveen; Malhotra, Sony; Burnley, Tom; Wood, Chris; Clare, Daniel K; Winn, Martyn; Topf, Maya

    2016-05-01

    As the resolutions of Three Dimensional Electron Microscopic reconstructions of biological macromolecules are being improved, there is a need for better fitting and refinement methods at high resolutions and robust approaches for model assessment. Flex-EM/MODELLER has been used for flexible fitting of atomic models in intermediate-to-low resolution density maps of different biological systems. Here, we demonstrate the suitability of the method to successfully refine structures at higher resolutions (2.5-4.5Å) using both simulated and experimental data, including a newly processed map of Apo-GroEL. A hierarchical refinement protocol was adopted where the rigid body definitions are relaxed and atom displacement steps are reduced progressively at successive stages of refinement. For the assessment of local fit, we used the SMOC (segment-based Manders' overlap coefficient) score, while the model quality was checked using the Qmean score. Comparison of SMOC profiles at different stages of refinement helped in detecting regions that are poorly fitted. We also show how initial model errors can have significant impact on the goodness-of-fit. Finally, we discuss the implementation of Flex-EM in the CCP-EM software suite. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  18. Refinement of atomic models in high resolution EM reconstructions using Flex-EM and local assessment

    PubMed Central

    Joseph, Agnel Praveen; Malhotra, Sony; Burnley, Tom; Wood, Chris; Clare, Daniel K.; Winn, Martyn; Topf, Maya

    2016-01-01

    As the resolutions of Three Dimensional Electron Microscopic reconstructions of biological macromolecules are being improved, there is a need for better fitting and refinement methods at high resolutions and robust approaches for model assessment. Flex-EM/MODELLER has been used for flexible fitting of atomic models in intermediate-to-low resolution density maps of different biological systems. Here, we demonstrate the suitability of the method to successfully refine structures at higher resolutions (2.5–4.5 Å) using both simulated and experimental data, including a newly processed map of Apo-GroEL. A hierarchical refinement protocol was adopted where the rigid body definitions are relaxed and atom displacement steps are reduced progressively at successive stages of refinement. For the assessment of local fit, we used the SMOC (segment-based Manders’ overlap coefficient) score, while the model quality was checked using the Qmean score. Comparison of SMOC profiles at different stages of refinement helped in detecting regions that are poorly fitted. We also show how initial model errors can have significant impact on the goodness-of-fit. Finally, we discuss the implementation of Flex-EM in the CCP-EM software suite. PMID:26988127

  19. EMS incident management: emergency medical logistics.

    PubMed

    Maniscalco, P M; Christen, H T

    1999-01-01

    If you had to get x amount of supplies to point A or point B, or both, in 10 minutes, how would you do it? The answer lies in the following steps: 1. Develop a logistics plan. 2. Use emergency management as a partner agency for developing your logistics plan. 3. Implement a push logistics system by determining what supplies/medications and equipment are important. 4. Place mass casualty/disaster caches at key locations for rapid deployment. Have medication/fluid caches available at local hospitals. 5. Develop and implement command caches for key supervisors and managers. 6. Anticipate the logistics requirements of a terrorism/tactical violence event based on a community threat assessment. 7. Educate the public about preparing a BLS family disaster kit. 8. Test logistics capabilities at disaster exercises. 9. Budget for logistics needs. 10. Never underestimate the importance of logistics. When logistics support fails, the EMS system fails.

  20. A new preparedness policy for EMS logistics.

    PubMed

    Lee, Seokcheon

    2017-03-01

    Response time in emergency medical services (EMS) is defined as the interval for an ambulance to arrive the scene after receipt of a 911 call. When several ambulances are available upon the receipt of a new call, a decision of selecting an ambulance has to be made in an effort to reduce response time. Dispatching the closest unit available is commonly used in practice; however, recently the Preparedness policy was designed that is in a simplistic form yet being capable of securing a long-term efficiency. This research aims to improve the Preparedness policy, resolving several critical issues inherent in the current form of the policy. The new Preparedness policy incorporates a new metric of preparedness based on the notion of centrality and involves a tuning parameter, weight on preparedness, which has to be appropriately chosen according to operational scenario. Computational experiment shows that the new policy significantly improves the former policy robustly in various scenarios.

  1. Online EM with weight-based forgetting.

    PubMed

    Celaya, Enric; Agostini, Alejandro

    2015-05-01

    In the online version of the EM algorithm introduced by Sato and Ishii ( 2000 ), a time-dependent discount factor is introduced for forgetting the effect of the old estimated values obtained with an earlier, inaccurate estimator. In their approach, forgetting is uniformly applied to the estimators of each mixture component depending exclusively on time, irrespective of the weight attributed to each unit for the observed sample. This causes an excessive forgetting in the less frequently sampled regions. To address this problem, we propose a modification of the algorithm that involves a weight-dependent forgetting, different for each mixture component, in which old observations are forgotten according to the actual weight of the new samples used to replace older values. A comparison of the time-dependent versus the weight-dependent approach shows that the latter improves the accuracy of the approximation and exhibits much greater stability.

  2. DOE EM industry programs robotics development

    SciTech Connect

    Staubly, R.; Kothari, V.

    1997-12-01

    The Office of Science and Technology (OST) manages an aggressive program for RD&D, as well as testing and evaluation for the U.S. Department of Energy`s (DOE) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. OST has organized technology management activities along focus teams for each major problem area. There are currently five focus areas: decontamination and decommissioning, tanks, subsurface contaminants, mixed waste, and plutonium. In addition, OST is pursuing research and development (R&D) that cuts across these focus areas by having applications in two or more focus areas. Currently, there are three cross-cutting programs: the robotics technology development; characterization, monitoring, and sensor technologies; and efficient separations and processing.

  3. Epidemiology of Emergency Medical Services (EMS) Utilization in Four Indian Emergency Departments.

    PubMed

    Wijesekera, Olindi; Reed, Amanda; Chastain, Parker S; Biggs, Shauna; Clark, Elizabeth G; Kole, Tamorish; Chakrapani, Anoop T; Ashish, Nandy; Rajhans, Prasad; Breaud, Alan H; Jacquet, Gabrielle A

    2016-12-01

    Introduction Without a universal Emergency Medical Services (EMS) system in India, data on the epidemiology of patients who utilize EMS are limited. This retrospective chart review aimed to quantify and describe the burden of disease and patient demographics of patients who arrived by EMS to four Indian emergency departments (EDs) in order to inform a national EMS curriculum.

  4. Tailoring transition metal complexes for nonlinear optics applications. 2. A theoretical investigation of the second-order nonlinear optical properties of M(CO)(5)L complexes (M = Cr, W; L = Py, PyCHO, Pyz, PyzBF(3), BPE, BPEBF(3)).

    PubMed

    Bruschi, Maurizio; Fantucci, Piercarlo; Pizzotti, Maddalena

    2005-10-27

    In this work, we report an ab initio investigation of second-order nonlinear optical (NLO) properties and absorption electronic spectra of push-pull transition metal chromophores of the formula [M(CO)(5)L] (M = Cr, W; L = pyridine (Py), 4-formyl-pyridine (PyCHO), pyrazine (Pyz), trans-1,2-bis(4-pyridyl)ethylene (BPE)). Pyz and BPE are considered either with one nitrogen atom free or interacting with the strong acceptor BF(3). All of the molecular properties have been calculated using two different and methodologically independent approaches: the time dependent and coupled perturbed density functional theories (TDDFT and CPDFT) and the sum-over-states (SOS) approach, where the excited states are obtained via the single configuration interaction (SCI) ab initio method. DFT results are in acceptable agreement with the experimental energy values of electronic transitions (with the exception of chromophores with the large pi-delocalization, like BPE); SCI calculations overestimate excitation energies and produce an inversion in the order of d(M) --> pi(L) and d(M) --> pi(CO) transitions. The SCI-SOS approach gives first-order hyperpolarizabilities, basically in agreement as trend and values with the experiments and seems to be a tool generally suitable for the evaluation of these properties also for transition metal complexes. On the other hand, the first-order hyperpolarizabilities computed using the CPDFT approach are consistently overestimated in comparison with the experimental results, especially in the case of a ligand with large pi-delocalization. We also show that the "two-level" approximation taking into account only the lowest energy charge transfer excitation (e.g., d(M) --> pi(L)) is not applicable to chromophores with the extended pi-delocalized ligand (BPE) coordinated to a transition metal, due to significant contributions originating from intraligand pi(L) --> pi(L) transitions. This study reports a detailed analysis and comparison of electronic NLO

  5. Best Practices for Managing Large CryoEM Facilities

    PubMed Central

    Alewijnse, Bart; Ashton, Alun W.; Chambers, Melissa G.; Chen, Songye; Cheng, Anchi; Ebrahim, Mark; Eng, Edward; Hagen, Wim J. H.; Koster, Abraham J.; López, Claudia S.; Lukoyanova, Natalya; Ortega, Joaquin; Renault, Ludovic; Reyntjens, Steve; Rice, William J.; Scapin, Giovanna; Schrijver, Raymond; Siebert, Alistair; Stagg, Scott M.; Grum-Tokars, Valerie; Wright, Elizabeth R.; Wu, Shenping; Yu, Zhiheng; Zhou, Z. Hong; Carragher, Bridget; Potter, Clinton S.

    2017-01-01

    This paper provides an overview of the discussion and presentations from the Workshop on the Management of Large CryoEM Facilities held at the New York Structural Biology Center, New York, NY on February 6–7, 2017. A major objective of the workshop was to discuss best practices for managing cryoEM facilities. The discussions were largely focused on supporting single-particle methods for cryoEM and topics included: user access, assessing projects, workflow, sample handling, microscopy, data management and processing, and user training. PMID:28827185

  6. Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993

    SciTech Connect

    Not Available

    1993-12-31

    The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical, and technical literacy and competency. This report discusses fiscal year 1993 activities.

  7. Transforming EMS Compliance at the Utah National Guard with an Automated Tool

    DTIC Science & Technology

    2009-05-01

    14001 & EMS 16 ISO 14001 EMS Requirements ISO14001 Requirement Condition WebEMIS™ 4.1 General Requirements None Uploads and stores EO 13423, EO...top level management with metrics and performance measures based on media WebEMIS vs. ISO 14001 & EMS 17 ISO 14001 EMS Requirements ISO14001 ...14001 EMS Requirements ISO14001 Requirement Condition WebEMIS 4.4 Implementation and Operation 4.4.1 Resources, Roles, Responsibility and Authority

  8. Recent developments in the CCP-EM software suite

    PubMed Central

    Burnley, Tom

    2017-01-01

    As part of its remit to provide computational support to the cryo-EM community, the Collaborative Computational Project for Electron cryo-Microscopy (CCP-EM) has produced a software framework which enables easy access to a range of programs and utilities. The resulting software suite incorporates contributions from different collaborators by encapsulating them in Python task wrappers, which are then made accessible via a user-friendly graphical user interface as well as a command-line interface suitable for scripting. The framework includes tools for project and data management. An overview of the design of the framework is given, together with a survey of the functionality at different levels. The current CCP-EM suite has particular strength in the building and refinement of atomic models into cryo-EM reconstructions, which is described in detail. PMID:28580908

  9. E.M. and Hadronic Shower Simulation with FLUKA

    SciTech Connect

    Battistoni, G.; Fasso, A.; Ferrari, A.; Ranft, J.; Rubbia, A.; Sala, P.R.; /INFN, Milan /SLAC /CERN /Siegen U. /Zurich, ETH

    2005-10-03

    A description of the main features of e.m. and hadronic shower simulation models used in the FLUKA code is summarized and some recent applications are discussed. The general status of the FLUKA project is also reported.

  10. Recent developments in the CCP-EM software suite.

    PubMed

    Burnley, Tom; Palmer, Colin M; Winn, Martyn

    2017-06-01

    As part of its remit to provide computational support to the cryo-EM community, the Collaborative Computational Project for Electron cryo-Microscopy (CCP-EM) has produced a software framework which enables easy access to a range of programs and utilities. The resulting software suite incorporates contributions from different collaborators by encapsulating them in Python task wrappers, which are then made accessible via a user-friendly graphical user interface as well as a command-line interface suitable for scripting. The framework includes tools for project and data management. An overview of the design of the framework is given, together with a survey of the functionality at different levels. The current CCP-EM suite has particular strength in the building and refinement of atomic models into cryo-EM reconstructions, which is described in detail.

  11. DOE-EM Science of Safety Robotics Challenge

    SciTech Connect

    Rimando, Rodrigo; Watts, Alex; Bobbitt, John; McLaughlin, Doug; Quigley, Morgan; Gladwell, Scott; McLoughlin, Mike; Kinnamon, Tony; Garcia, Joe; Ansari, Alex; Voyles, Richard; Chambers, David; Pryor, Mitch; Workman, Theresa; Mehling, Joshua; Browning, Kimberly; Deuel, Jake; Profitt, Bryan; Reibold, Marty

    2016-09-20

    During the week of August 22nd, 2016, over 150 technologists, stakeholders, and Department of Energy, Office of Environmental Management workers, met at DOE’s Portsmouth Gaseous Diffusion Plant in Ohio, for the EM Science of Safety Robotics Challenge.

  12. Near-atomic-resolution cryo-EM for molecular virology.

    PubMed

    Hryc, Corey F; Chen, Dong-Hua; Chiu, Wah

    2011-08-01

    Electron cryo-microscopy (cryo-EM) is a technique in structural biology that is widely used to solve the three-dimensional structures of macromolecular assemblies, close to their biological and solution conditions. Recent improvements in cryo-EM and single-particle reconstruction methodologies have led to the determination of several virus structures at near-atomic resolution (3.3 - 4.6 Å). These cryo-EM structures not only resolve the Cα backbones and side-chain densities of viral capsid proteins, but also suggest functional roles that the protein domains and some key amino acid residues play. This paper reviews the recent advances in near-atomic-resolution cryo-EM for probing the mechanisms of virus assembly and morphogenesis.

  13. EMS: A framework for data acquisition and analysis

    NASA Astrophysics Data System (ADS)

    Nogiec, J. M.; Sim, J.; Trombly-Freytag, K.; Walbridge, D.

    2001-08-01

    The Extensible Measurement System (EMS) is a universal Java framework for building data analysis and test systems. The objective of the EMS project is to replace a multitude of different existing systems with a single expandable system, capable of accommodating various test and analysis scenarios and varying algorithms. The EMS framework is based on component technology, graphical assembly of systems, introspection and flexibility to accommodate various data processing and data acquisition components. Core system components, common to many application domains, have been identified and designed together with the domain-specific components for the measurement of accelerator magnets. The EMS employs several modern technologies and the result is a highly portable, configurable, and potentially distributed system, with the capability of parallel signal data processing, parameterized test scripting, and run-time reconfiguration.

  14. EmPOWER Maryland - Leveraging relationships and experience

    EPA Pesticide Factsheets

    DHCD has gained a deep understanding of the needs of Maryland’s low-income residents and therefore was well-positioned to implement the low-income components of the broader EmPOWER Maryland energy efficiency initiative.

  15. Classification of ASASSN-17em/AT2017cts

    NASA Astrophysics Data System (ADS)

    Bersier, David

    2017-04-01

    We obtained a spectrum of the candidate supernova ASASSN-17em/AT2017cts (ATEL #10241), using the SPRAT spectrograph mounted on the robotic 2m Liverpool Telescope at the Roque de los Muchachos observatory (La Palma).

  16. Classification of ASASSN-17em/AT2017cts

    NASA Astrophysics Data System (ADS)

    Bersier, David

    2017-04-01

    We obtained a spectrum of the candidate supernova ASASSN-17em/AT2017cts (ATEL #10241), using the SPRAT spectrograph mounted on the robotic 2m Liverpool Telescope at the Roque de los Muchachos observatory (La Palma).

  17. Analysis of NSWC Ocean EM Observatory Test Data

    DTIC Science & Technology

    2016-09-01

    Analysis of NSWC Ocean EM Observatory test data: final report J. Bradley Nelson Date: September 2016 Contract #: NICOP - N62909-15...From - To) 09/01/2016 Technical Report #2 July 2015 - September 2016 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Analysis of NSWC Ocean EM Observatory...distribution is unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT NSWC-Carderock is leading a defense/academia group to instrument the South Florida Ocean

  18. NASA EM Followup of LIGO-Virgo Candidate Events

    NASA Technical Reports Server (NTRS)

    Blackburn, Lindy L.

    2011-01-01

    We present a strategy for a follow-up of LIGO-Virgo candidate events using offline survey data from several NASA high-energy photon instruments aboard RXTE, Swift, and Fermi. Time and sky-location information provided by the GW trigger allows for a targeted search for prompt and afterglow EM signals. In doing so, we expect to be sensitive to signals which are too weak to be publicly reported as astrophysical EM events.

  19. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-31

    The right hand aft skirt for NASA's Space Launch System (SLS) rocket has been refurbished and painted and is in a drying cell in a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt will be used on the right hand booster of the SLS for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep space missions, and the Journey to Mars.

  20. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-28

    A technician with Orbital ATK, prime contractor for the Space Launch System (SLS) Booster, preps a section of the right hand aft skirt for primer and paint in a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt will be used on the right hand booster of NASA's SLS rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep space missions, and the Journey to Mars.

  1. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-29

    The right hand aft skirt for NASA's Space Launch System (SLS) rocket has been painted and is in a drying cell in a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt will be used on the right hand booster of NASA's Space Launch System rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep space missions, and the Journey to Mars.

  2. EM Telemetry Tool for Deep Well Drilling Applications

    SciTech Connect

    Jeffrey M. Gabelmann

    2005-11-15

    This final report discusses the successful development and testing of a deep operational electromagnetic (EM) telemetry system, produced under a cooperative agreement with the United States Department of Energy's National Energy Technology Laboratory. This new electromagnetic telemetry system provides a wireless communication link between sensors deployed deep within oil and gas wells and data acquisition equipment located on the earth's surface. EM based wireless telemetry is a highly appropriate technology for oil and gas exploration in that it avoids the need for thousands of feet of wired connections. In order to achieve the project performance objectives, significant improvements over existing EM telemetry systems were made. These improvements included the development of new technologies that have improved the reliability of the communications link while extending operational depth. A key element of the new design is the incorporation of a data-fusion methodology which enhances the communication receiver's ability to extract very weak signals from large amounts of ambient environmental noise. This innovative data-fusion receiver based system adapts advanced technologies, not normally associated with low-frequency communications, and makes them work within the harsh drilling environments associated with the energy exploration market. Every element of a traditional EM telemetry system design, from power efficiency to reliability, has been addressed. The data fusion based EM telemetry system developed during this project is anticipated to provide an EM tool capability that will impact both onshore and offshore oil and gas exploration operations, for conventional and underbalanced drilling applications.

  3. STEME: efficient EM to find motifs in large data sets.

    PubMed

    Reid, John E; Wernisch, Lorenz

    2011-10-01

    MEME and many other popular motif finders use the expectation-maximization (EM) algorithm to optimize their parameters. Unfortunately, the running time of EM is linear in the length of the input sequences. This can prohibit its application to data sets of the size commonly generated by high-throughput biological techniques. A suffix tree is a data structure that can efficiently index a set of sequences. We describe an algorithm, Suffix Tree EM for Motif Elicitation (STEME), that approximates EM using suffix trees. To the best of our knowledge, this is the first application of suffix trees to EM. We provide an analysis of the expected running time of the algorithm and demonstrate that STEME runs an order of magnitude more quickly than the implementation of EM used by MEME. We give theoretical bounds for the quality of the approximation and show that, in practice, the approximation has a negligible effect on the outcome. We provide an open source implementation of the algorithm that we hope will be used to speed up existing and future motif search algorithms.

  4. STEME: efficient EM to find motifs in large data sets

    PubMed Central

    Reid, John E.; Wernisch, Lorenz

    2011-01-01

    MEME and many other popular motif finders use the expectation–maximization (EM) algorithm to optimize their parameters. Unfortunately, the running time of EM is linear in the length of the input sequences. This can prohibit its application to data sets of the size commonly generated by high-throughput biological techniques. A suffix tree is a data structure that can efficiently index a set of sequences. We describe an algorithm, Suffix Tree EM for Motif Elicitation (STEME), that approximates EM using suffix trees. To the best of our knowledge, this is the first application of suffix trees to EM. We provide an analysis of the expected running time of the algorithm and demonstrate that STEME runs an order of magnitude more quickly than the implementation of EM used by MEME. We give theoretical bounds for the quality of the approximation and show that, in practice, the approximation has a negligible effect on the outcome. We provide an open source implementation of the algorithm that we hope will be used to speed up existing and future motif search algorithms. PMID:21785132

  5. A History and Informal Assessment of the <em>Slacker Astronomyem> Podcast

    NASA Astrophysics Data System (ADS)

    Price, Aaron; Gay, Pamela; Searle, Travis; Brissenden, Gina

    Slacker Astronomyem> is a weekly podcast that covers a recent astronomical news event or discovery. The show has a unique style consisting of irreverent, over-the-top humor combined with a healthy dose of hard science. According to our demographic analysis, the combination of this style and the unique podcasting distribution mechanism allows the show to reach audiences younger and busier than those reached via traditional channels. We report on the successes and challenges of the first year of the show, and provide an informal assessment of its role as a source for astronomical news and concepts for its approximately 15,500 weekly listeners.

  6. A HF EM installation allowing simultaneous whole body and deep local EM hyperthermia.

    PubMed

    Mazokhin, V N; Kolmakov, D N; Lucheyov, N A; Gelvich, E A; Troshin, I I

    1999-01-01

    The structure and main features of a HF EM installation based upon a new approach for creating electromagnetic fields destined for whole body (WBH) and deep local (DLH) hyperthermia are discussed. The HF EM field, at a frequency of 13.56 MHz, is created by a coplanar capacity type applicator positioned under a distilled water filled bolus that the patient is lying on. The EM energy being released directly in the deep tissues ensures effective whole body heating to required therapeutic temperatures of up to 43.5 degrees C, whereas the skin temperature can be maintained as low as 39-40.5 degrees C. For DLH, the installation is equipped with additional applicators and a generator operating at a frequency of 40.68 MHz. High efficiency of the WBH applicator makes it possible to carry out the WBH procedure without any air-conditioning cabin. Due to this, a free access to the patient's body during the WBH treatment is provided and a simultaneous WBH/DLH or WBH/LH procedure by means of additional applicators is possible. Controllable power output in the range of 100-800 W at a frequency of 13.56 MHz and 50-350 W at a frequency of 40.68 MHz allows accurate temperature control during WBH, DLH and WBH/DLH procedures. SAR patterns created by the WBH and DLH applicators in a liquid muscle phantom and measured by means of a non-perturbing E-dipole are investigated. The scattered EM field strength measured in the vicinity of the operating installation during the WBH, DLH and WBH/DLH procedures does not exceed security standards. Examples of temperature versus time graphs in the course of WBH, DLH and WBH/DLH procedures in clinics are presented. The installation is successfully used in leading oncological institutions of Russia and Belarus, though combined WBH/DLH procedures are evidently more complicated and demand thorough planning and temperature measurements to avoid overheating.

  7. Airborne EM for mine infrastructure planning

    NASA Astrophysics Data System (ADS)

    Wijns, Chris

    2016-08-01

    Airborne electromagnetic (AEM) surveys with near-surface vertical resolution provide rapid and comprehensive coverage of a mine site ahead of infrastructure planning. In environments of sufficient electrical conductivity contrast, the data will map variations in the depth to bedrock, providing guidance for expected excavation depths for solid building foundations, or mine pre-strip volumes. Continuous coverage overcomes the severe areal limitation of relying only on drilling and test pits. An AEM survey in northern Finland illustrates the success of this approach for guiding the placement of a mine crusher and related infrastructure. The cost of the EM data collection and interpretation is insignificant in comparison to the US$300 million capital cost of the mine infrastructure. This environment of shallow glacial cover challenges the limits of AEM resolution, yet analysis of subsequently collected three-dimensional (3D) surface seismic data and actual pre-strip excavation depths reinforces the predictive, but qualitative, mapping capability of the AEM. It also highlights the need to tune the modelling via petrophysics for the specific goal of the investigation, and exposes the limitations of visual drill core logging.

  8. Databases and archiving for cryoEM

    PubMed Central

    Patwardhan, Ardan; Lawson, Catherine L.

    2017-01-01

    Cryo-EM in structural biology is currently served by three public archives – EMDB for 3DEM reconstructions, PDB for models built from 3DEM reconstructions and EMPIAR for the raw 2D image data used to obtain the 3DEM reconstructions. These archives play a vital role for both the structural community and the wider biological community in making the data accessible so that results may be reused, reassessed and integrated with other structural and bioinformatics resources. The important role of the archives is underpinned by the fact that many journals mandate the deposition of data to PDB and EMDB on publication. The field is currently undergoing transformative changes where on the one hand high-resolution structures are becoming a routine occurrence while on the other hand electron tomography is enabling the study of macromolecules in the cellular context. Concomitantly the archives are evolving to best serve their stakeholder communities. In this chapter we describe the current state of the archives, resources available for depositing, accessing, searching, visualising and validating data, on-going community-wide initiatives and opportunities and challenges for the future. PMID:27572735

  9. DOE EM industry programs robotics development

    SciTech Connect

    Staubly, R.; Kothari, V.

    1998-12-31

    The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy`s (DOE`s) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution.

  10. Analysis of EM dataset with several sensor configurations obtained by the loop-loop EM survey on magnetic anomalies

    NASA Astrophysics Data System (ADS)

    CHOI, J.; Yi, M. J.; Sasaki, Y.; Son, J.; Nam, M. J.

    2015-12-01

    Most of mineral mines in Korea are located in rugged mountain area embedding small-scale anomalies. Loop-loop EM survey system can be a better choice for exploring those mines because no ground contact is required and portable loops are freely positioned. Survey design is very important for detecting small amount of mineral deposits efficiently and spatial limits of survey lines should be considered. Along a same survey line, surveys with different separations between a transmitter and a receiver are applicable. EM responses are calculated in a layered-earth model embedding magnetic anomalies and analyses considering electric conductivity and magnetic permeability are made for the loop-loop EM survey data. Combining EM dataset with multi-frequency and multi-separation slightly enhanced a reconstructed image. Loop-loop EM survey using PROMOIS system was conducted on a small magnetite mine. Inversion with and without considering magnetic permeability was conducted for EM data with multi-frequency and multi-separation between a transmitter and a receiver.

  11. Image segmentation by EM-based adaptive pulse coupled neural networks in brain magnetic resonance imaging.

    PubMed

    Fu, J C; Chen, C C; Chai, J W; Wong, S T C; Li, I C

    2010-06-01

    We propose an automatic hybrid image segmentation model that integrates the statistical expectation maximization (EM) model and the spatial pulse coupled neural network (PCNN) for brain magnetic resonance imaging (MRI) segmentation. In addition, an adaptive mechanism is developed to fine tune the PCNN parameters. The EM model serves two functions: evaluation of the PCNN image segmentation and adaptive adjustment of the PCNN parameters for optimal segmentation. To evaluate the performance of the adaptive EM-PCNN, we use it to segment MR brain image into gray matter (GM), white matter (WM) and cerebrospinal fluid (CSF). The performance of the adaptive EM-PCNN is compared with that of the non-adaptive EM-PCNN, EM, and Bias Corrected Fuzzy C-Means (BCFCM) algorithms. The result is four sets of boundaries for the GM and the brain parenchyma (GM+WM), the two regions of most interest in medical research and clinical applications. Each set of boundaries is compared with the golden standard to evaluate the segmentation performance. The adaptive EM-PCNN significantly outperforms the non-adaptive EM-PCNN, EM, and BCFCM algorithms in gray mater segmentation. In brain parenchyma segmentation, the adaptive EM-PCNN significantly outperforms the BCFCM only. However, the adaptive EM-PCNN is better than the non-adaptive EM-PCNN and EM on average. We conclude that of the three approaches, the adaptive EM-PCNN yields the best results for gray matter and brain parenchyma segmentation.

  12. FitEM2EM--tools for low resolution study of macromolecular assembly and dynamics.

    PubMed

    Frankenstein, Ziv; Sperling, Joseph; Sperling, Ruth; Eisenstein, Miriam

    2008-01-01

    Studies of the structure and dynamics of macromolecular assemblies often involve comparison of low resolution models obtained using different techniques such as electron microscopy or atomic force microscopy. We present new computational tools for comparing (matching) and docking of low resolution structures, based on shape complementarity. The matched or docked objects are represented by three dimensional grids where the value of each grid point depends on its position with regard to the interior, surface or exterior of the object. The grids are correlated using fast Fourier transformations producing either matches of related objects or docking models depending on the details of the grid representations. The procedures incorporate thickening and smoothing of the surfaces of the objects which effectively compensates for differences in the resolution of the matched/docked objects, circumventing the need for resolution modification. The presented matching tool FitEM2EMin successfully fitted electron microscopy structures obtained at different resolutions, different conformers of the same structure and partial structures, ranking correct matches at the top in every case. The differences between the grid representations of the matched objects can be used to study conformation differences or to characterize the size and shape of substructures. The presented low-to-low docking tool FitEM2EMout ranked the expected models at the top.

  13. Colloidal Oatmeal <em>(Avena Sativa)em> Improves Skin Barrier Through Multi-Therapy Activity.

    PubMed

    Ilnytska, Olha; Kaur, Simarna; Chon, Suhyoun; Reynertson, Kurt A; Nebus, Judith; Garay, Michelle; Mahmood, Khalid; Southall, Michael D

    2016-06-01

    Oats (Avena sativa) are a centuries-old topical treatment for a variety of skin barrier conditions, including dry skin, skin rashes, and eczema; however, few studies have investigated the actual mechanism of action for the skin barrier strengthening activity of colloidal oatmeal. Four extracts of colloidal oatmeal were prepared with various solvents and tested in vitro for skin barrier related gene expression and activity. Extracts of colloidal oatmeal were found to induce the expression of genes related to epidermal differentiation, tight junctions and lipid regulation in skin, and provide pH-buffering capacity. Colloidal oatmeal boosted the expression of multiple target genes related to skin barrier, and resulted in recovery of barrier damage in an in vitro model of atopic dermatitis. In addition, an investigator-blinded study was performed with 50 healthy female subjects who exhibited bilateral moderate to severe dry skin on their lower legs. Subjects were treated with a colloidal oatmeal skin protectant lotion. Clinically, the colloidal oatmeal lotion showed significant clinical improvements in skin dryness, moisturization, and barrier. Taken together, these results demonstrate that colloidal oatmeal can provide clinically effective benefits for dry and compromised skin by strengthening skin barrier.

    <em>J Drugs Dermatolem>. 2016;15(6):684-690.

  14. Emergency medical service (EMS): A unique flight environment

    NASA Technical Reports Server (NTRS)

    Shively, R. Jay

    1993-01-01

    The EMS flight environment is unique in today's aviation. The pilots must respond quickly to emergency events and often fly to landing zones where they have never been before . The time from initially receiving a call to being airborne can be as little as two to three minutes. Often the EMS pilot is the only aviation professional on site, they have no operations people or other pilots to aid them in making decisons. Further, since they are often flying to accident scenes, not airports, there is often complete weather and condition information. Therefore, the initial decision that the pilot must make, accepting or declining a flight, can become very difficult. The accident rate of EMS helicopters has been relatively high over the past years. NASA-Ames research center has taken several steps in an attempt to aid EMS pilots in their decision making and situational awareness. A preflight risk assessment system (SAFE) was developed to aid pilots in their decision making, and was tested at an EMS service. The resutls of the study were promising and a second version incorporating the lessons learned is under development. A second line of research was the development of a low cost electronic chart display (ECD). This is a digital map display to help pilots maintain geographical orientation. Another thrust was undertaken in conjunction with the Aviation Safety Reporting System (ASRS). This involved publicizing the ASRS to EMS pilots and personnel, and calling each of the reporters back to gather additional information. This paper will discuss these efforts and how they may positively impact the safety of EMS operations.

  15. Emergency medical service (EMS): A unique flight environment

    NASA Technical Reports Server (NTRS)

    Shively, R. Jay

    1993-01-01

    The EMS flight environment is unique in today's aviation. The pilots must respond quickly to emergency events and often fly to landing zones where they have never been before . The time from initially receiving a call to being airborne can be as little as two to three minutes. Often the EMS pilot is the only aviation professional on site, they have no operations people or other pilots to aid them in making decisons. Further, since they are often flying to accident scenes, not airports, there is often complete weather and condition information. Therefore, the initial decision that the pilot must make, accepting or declining a flight, can become very difficult. The accident rate of EMS helicopters has been relatively high over the past years. NASA-Ames research center has taken several steps in an attempt to aid EMS pilots in their decision making and situational awareness. A preflight risk assessment system (SAFE) was developed to aid pilots in their decision making, and was tested at an EMS service. The resutls of the study were promising and a second version incorporating the lessons learned is under development. A second line of research was the development of a low cost electronic chart display (ECD). This is a digital map display to help pilots maintain geographical orientation. Another thrust was undertaken in conjunction with the Aviation Safety Reporting System (ASRS). This involved publicizing the ASRS to EMS pilots and personnel, and calling each of the reporters back to gather additional information. This paper will discuss these efforts and how they may positively impact the safety of EMS operations.

  16. Degradation of Benzodiazepines after 120 Days of EMS Deployment

    PubMed Central

    McMullan, Jason T.; Jones, Elizabeth; Barnhart, Bruce; Denninghoff, Kurt; Spaite, Daniel; Zaleski, Erin; Silbergleit, Robert

    2014-01-01

    Introduction EMS treatment of status epilepticus improves outcomes, but the benzodiazepine best suited for EMS use is unclear, given potential high environmental temperature exposures. Objective To describe the degradation of diazepam, lorazepam, and midazolam as a function of temperature exposure and time over 120 days of storage on active EMS units. Methods Study boxes containing vials of diazepam, lorazepam, and midazolam were distributed to 4 active EMS units in each of 2 EMS systems in the southwestern United States during May–August 2011. The boxes logged temperature every minute and were stored in EMS units per local agency policy. Two vials of each drug were removed from each box at 30-day intervals and underwent high-performance liquid chromatography to determine drug concentration. Concentration was analyzed as mean (and 95%CI) percent of initial labeled concentration as a function of time and mean kinetic temperature (MKT). Results 192 samples were collected (2 samples of each drug from each of 4 units per city at 4 time-points). After 120 days, the mean relative concentration (95%CI) of diazepam was 97.0% (95.7–98.2%) and of midazolam was 99.0% (97.7–100.2%). Lorazepam experienced modest degradation by 60 days (95.6% [91.6–99.5%]) and substantial degradation at 90 days (90.3% [85.2-95.4%]) and 120 days (86.5% [80.7–92.3%]). Mean MKT was 31.6°C (95%CI 27.1–36.1). Increasing MKT was associated with greater degradation of lorazepam, but not midazolam or diazepam. Conclusions Midazolam and diazepam experienced minimal degradation throughout 120 days of EMS deployment in high-heat environments. Lorazepam experienced significant degradation over 120 days and appeared especially sensitive to higher MKT exposure. PMID:24548058

  17. Resource Document: Coordination of Pediatric Emergency Care in EMS Systems.

    PubMed

    Remick, Katherine; Gross, Toni; Adelgais, Kathleen; Shah, Manish I; Leonard, Julie C; Gausche-Hill, Marianne

    2017-01-01

    Citing numerous pediatric-specific deficiencies within Emergency Medical Services (EMS) systems, the Institute of Medicine (IOM) recommended that EMS systems appoint a pediatric emergency care coordinator (PECC) to provide oversight of EMS activities related to care of children, to promote the integration of pediatric elements into day-to-day services as well as local and/or regional disaster planning, and to promote pediatric education across all levels of EMS providers. A systematic review of the literature was undertaken to describe the evidence for pediatric coordination across the emergency care continuum. The search strategy was developed by the investigators in consultation with a medical librarian and conducted in OVID, Medline, PubMed, Embase, Web of Science, and CINAHL databases from January 1, 1983 to January 1, 2016. All research articles that measured a patient-related or system-related outcome associated with pediatric coordination in the setting of emergency care, trauma, or disaster were included. Opinion articles, commentaries, and letters to the editors were excluded. Three investigators independently screened citations in a hierarchical manner and abstracted data. Of 149 identified titles, nine were included in the systematic review. The nine articles included one interventional study, five surveys, and three consensus documents. All articles favored the presence of pediatric coordination. The interventional study demonstrated improved documentation, clinical management, and staff awareness of high priority pediatric areas. The current literature supports the identification of pediatric coordination to facilitate the optimal care of children within EMS systems. In order for EMS systems to provide high quality care to children, pediatric components must be integrated into all aspects of care including day-to-day operations, policies, protocols, available equipment and medications, quality improvement efforts, and disaster planning. This systematic

  18. The EM-POGO: A simple, absolute velocity profiler

    NASA Astrophysics Data System (ADS)

    Terker, S. R.; Sanford, T. B.; Dunlap, J. H.; Girton, J. B.

    2013-01-01

    Electromagnetic current instrumentation has been added to the Bathy Systems, Inc. POGO transport sondes to produce a free-falling absolute velocity profiler called EM-POGO. The POGO is a free-fall profiler that measures a depth-averaged velocity using GPS fixes at the beginning and end of a round trip to the ocean floor (or a preset depth). The EM-POGO adds a velocity profile determined from measurements of motionally induced electric fields generated by the ocean current moving through the vertical component of the Earth's magnetic field. In addition to providing information about the vertical structure of the velocity, the depth-dependent measurements improve transport measurements by correcting for the non-constant fall-rate. Neglecting the variable fall rate results in errors O (1 cm s-1). The transition from POGO to EM-POGO included electrically isolating the POGO and electric-field-measuring circuits, installing a functional GPS receiver, finding a pressure case that provided an optimal balance among crush-depth, price and size, and incorporating the electrodes, electrode collar, and the circuitry required for the electric field measurement. The first EM-POGO sea-trial was in July 1999. In August 2006 a refurbished EM-POGO collected 15 absolute velocity profiles; relative and absolute velocity uncertainty was ˜1cms-1 and 0.5-5 cm s-1, respectively, at a vertical resolution of 25 m. Absolute velocity from the EM-POGO compared to shipboard ADCP measurements differed by ˜ 1-2 cm s-1, comparable to the uncertainty in absolute velocity from the ADCP. The EM-POGO is thus a low-cost, easy to deploy and recover, and accurate velocity profiler.

  19. International Space Station (ISS) Emergency Mask (EM) Development

    NASA Technical Reports Server (NTRS)

    Toon, Katherine P.; Hahn, Jeffrey; Fowler, Michael; Young, Kevin

    2011-01-01

    The Emergency Mask (EM) is considered a secondary response emergency Personal Protective Equipment (PPE) designed to provide respiratory protection to the International Space Station (ISS) crewmembers in response to a post-fire event or ammonia leak. The EM is planned to be delivered to ISS in 2012 to replace the current air purifying respirator (APR) onboard ISS called the Ammonia Respirator (AR). The EM is a one ]size ]fits ]all model designed to fit any size crewmember, unlike the APR on ISS, and uses either two Fire Cartridges (FCs) or two Commercial Off-the-Shelf (COTS) 3M(Trademark). Ammonia Cartridges (ACs) to provide the crew with a minimum of 8 hours of respiratory protection with appropriate cartridge swap ]out. The EM is designed for a single exposure event, for either post ]fire or ammonia, and is a passive device that cannot help crewmembers who cannot breathe on their own. The EM fs primary and only seal is around the wearer fs neck to prevent a crewmember from inhaling contaminants. During the development of the ISS Emergency Mask, several design challenges were faced that focused around manufacturing a leak free mask. The description of those challenges are broadly discussed but focuses on one key design challenge area: bonding EPDM gasket material to Gore(Registered Trademark) fabric hood.

  20. Breaking Cryo-EM Resolution Barriers to Facilitate Drug Discovery.

    PubMed

    Merk, Alan; Bartesaghi, Alberto; Banerjee, Soojay; Falconieri, Veronica; Rao, Prashant; Davis, Mindy I; Pragani, Rajan; Boxer, Matthew B; Earl, Lesley A; Milne, Jacqueline L S; Subramaniam, Sriram

    2016-06-16

    Recent advances in single-particle cryoelecton microscopy (cryo-EM) are enabling generation of numerous near-atomic resolution structures for well-ordered protein complexes with sizes ≥ ∼200 kDa. Whether cryo-EM methods are equally useful for high-resolution structural analysis of smaller, dynamic protein complexes such as those involved in cellular metabolism remains an important question. Here, we present 3.8 Å resolution cryo-EM structures of the cancer target isocitrate dehydrogenase (93 kDa) and identify the nature of conformational changes induced by binding of the allosteric small-molecule inhibitor ML309. We also report 2.8-Å- and 1.8-Å-resolution structures of lactate dehydrogenase (145 kDa) and glutamate dehydrogenase (334 kDa), respectively. With these results, two perceived barriers in single-particle cryo-EM are overcome: (1) crossing 2 Å resolution and (2) obtaining structures of proteins with sizes < 100 kDa, demonstrating that cryo-EM can be used to investigate a broad spectrum of drug-target interactions and dynamic conformational states.

  1. Refinement of Atomic Structures Against cryo-EM Maps.

    PubMed

    Murshudov, G N

    2016-01-01

    This review describes some of the methods for atomic structure refinement (fitting) against medium/high-resolution single-particle cryo-EM reconstructed maps. Some of the tools developed for macromolecular X-ray crystal structure analysis, especially those encapsulating prior chemical and structural information can be transferred directly for fitting into cryo-EM maps. However, despite the similarities, there are significant differences between data produced by these two techniques; therefore, different likelihood functions linking the data and model must be used in cryo-EM and crystallographic refinement. Although tools described in this review are mostly designed for medium/high-resolution maps, if maps have sufficiently good quality, then these tools can also be used at moderately low resolution, as shown in one example. In addition, the use of several popular crystallographic methods is strongly discouraged in cryo-EM refinement, such as 2Fo-Fc maps, solvent flattening, and feature-enhanced maps (FEMs) for visualization and model (re)building. Two problems in the cryo-EM field are overclaiming resolution and severe map oversharpening. Both of these should be avoided; if data of higher resolution than the signal are used, then overfitting of model parameters into the noise is unavoidable, and if maps are oversharpened, then at least parts of the maps might become very noisy and ultimately uninterpretable. Both of these may result in suboptimal and even misleading atomic models.

  2. Application of the EM algorithm to radiographic images.

    PubMed

    Brailean, J C; Little, D; Giger, M L; Chen, C T; Sullivan, B J

    1992-01-01

    The expectation maximization (EM) algorithm has received considerable attention in the area of positron emitted tomography (PET) as a restoration and reconstruction technique. In this paper, the restoration capabilities of the EM algorithm when applied to radiographic images is investigated. This application does not involve reconstruction. The performance of the EM algorithm is quantitatively evaluated using a "perceived" signal-to-noise ratio (SNR) as the image quality metric. This perceived SNR is based on statistical decision theory and includes both the observer's visual response function and a noise component internal to the eye-brain system. For a variety of processing parameters, the relative SNR (ratio of the processed SNR to the original SNR) is calculated and used as a metric to compare quantitatively the effects of the EM algorithm with two other image enhancement techniques: global contrast enhancement (windowing) and unsharp mask filtering. The results suggest that the EM algorithm's performance is superior when compared to unsharp mask filtering and global contrast enhancement for radiographic images which contain objects smaller than 4 mm.

  3. Topical Treatment With an Agent Disruptive to <em>P. acnesem> Biofilm Provides Positive Therapeutic Response: Results of a Randomized Clinical Trial.

    PubMed

    Bernhardt, Michael J; Myntti, Matthew F

    2016-06-01

    The traditional disease model of acne has been one of follicular plugging due to 'sticky epithelial cells' associated with increased sebum production with deep follicular anaerobic conditions favoring <em>P. acnesem>- generated inflammation. <em>P. acnesem> biofilms have been found more frequently in patients with acne than controls. Biofilms are genetically coded to create adhesion to the pilosebaceous unit followed by production of a mucopolysaccharide coating capable of binding to lipid surfaces. Traditional therapies for acne have involved mixtures of oral and topical antibiotics admixed with topical keratolytics and retinoids, which are aimed at traditional bacterial reduction as well as downregulating the inflammatory cascade. These approaches are limited by side effect and compliance/tolerability issues. As the <em>P. acnesem> biofilm may, in fact, be the instigator of this process, we studied the use of a topical agent designed to reduce the <em>P. acnesem> biofilm to see if reducing the biofilm would be therapeutically efficacious. We present data of a proprietary topical non-prescription agent with a novel pharmaco mechanism designed to attack the biofilm produced by <em>P. acnesem>. Our data shows a decrease of inflammatory lesions by 44% and non-inflammatory lesions by 32% after 12 weeks and also provided for a meaningful improvement in the quality of life of the patients in the study. These improvements were achieved with a product that was not associated with burning, chafing, irritation, or erythema, which can be seen with topical treatments. It is apparent from this study that by addressing the biofilm which protects the <em>P. acnesem> bacteria through the use of the Acne Gel, the incidence of acne symptoms can be greatly reduced, while having no negative impacts on the patients' skin (ClinicalTrials.gov registry number NCT02404285).

    <em>J Drugs Dermatol. em>2016;15(6):677-683.

  4. Where There is No EMS: Lay Providers in Emergency Medical Services Care - EMS as a Public Health Priority.

    PubMed

    Debenham, Sierra; Fuller, Matthew; Stewart, Matthew; Price, Raymond R

    2017-08-11

    By 2030, road traffic accidents are projected to be the fifth leading cause of death worldwide, with 90% of these deaths occurring in low- and middle-income countries (LMICs). While high-quality, prehospital trauma care is crucial to reduce the number of trauma-related deaths, effective Emergency Medical Systems (EMS) are limited or absent in many LMICs. Although lay providers have long been recognized as the front lines of informal trauma care in countries without formal EMS, few efforts have been made to capitalize on these networks. We suggest that lay providers can become a strong foundation for nascent EMS through a four-fold approach: strengthening and expanding existing lay provider training programs; incentivizing lay providers; strengthening locally available first aid supply chains; and using technology to link lay provider networks. Debenham S , Fuller M , Stewart M , Price RR . Where there is no EMS: lay providers in Emergency Medical Services care - EMS as a public health priority. Prehosp Disaster Med. 2017;32(6):1-3.

  5. EMS Stretcher “Misadventures” in a Large, Urban EMS System: A Descriptive Analysis of Contributing Factors and Resultant Injuries

    PubMed Central

    Goodloe, Jeffrey M.; Crowder, Christopher J.; Arthur, Annette O.; Thomas, Stephen H.

    2012-01-01

    Purpose. There is a paucity of data regarding EMS stretcher-operation-related injuries. This study describes and analyzes characteristics associated with undesirable stretcher operations, with or without resultant injury in a large, urban EMS agency. Methods. In the study agency, all stretcher-related “misadventures” are required to be documented, regardless of whether injury results. All stretcher-related reports between July 1, 2009 and June 30, 2010 were queried in retrospective analysis, avoiding Hawthorne effect in stretcher operations. Results. During the year studied, 129,110 patients were transported. 23 stretcher incidents were reported (0.16 per 1,000 transports). No patient injury occurred. Four EMS providers sustained minor injuries. Among contributing aspects, the most common involved operations surrounding the stretcher-ambulance safety latch, 14/23 (60.9%). From a personnel injury prevention perspective, there exists a significant relationship between combative patients and crew injury related to stretcher operation, Fisher's exact test 0.048. Conclusions. In this large, urban EMS system, the incidence of injury related to stretcher operations in the one-year study period is markedly low, with few personnel injuries and no patient injuries incurred. Safety for EMS personnel and patients could be advanced by educational initiatives that highlight specific events and conditions contributing to stretcher-related adverse events. PMID:22606379

  6. EMS-induced cytomictic variability in safflower (Carthamus tinctorius L.).

    PubMed

    Srivastava, P; Kumar, G

    2011-01-01

    Seeds of safflower (Carthamus tinctorius L.) were subjected to three treatment durations (3h, 5h and 7h) of 0.5 % Ethyl Methane Sulphonate (EMS). Microsporogenesis was carried out in the control as well as in the treated materials. EMS treated plants showed interesting feature of partial inter-meiocyte chromatin migration through channel formation, beak formation or direct cell fusion. Another interesting feature noticed during the study was the fusion among tetrads due to wall dissolution. The phenomenon of cytomixis was recorded at nearly all the stages of microsporogenesis connecting from a few to several meiocytes. Other abnormalities such as laggards, precocious movement, bridge and non-disjunction of chromosomes were also recorded but in very low frequencies. The phenomenon of cytomixis increased along with the increase in treatment duration of EMS. Cells with these types of cytomictic disturbances may probably result in uneven formation of gametes or zygote, heterogenous sized pollen grains or even loss of fertility in future.

  7. Pirmasis lietuvi\\vskas Suvalkijos žemėlapis

    NASA Astrophysics Data System (ADS)

    Girkus, Romualdas; Lukoševičius, Viktoras

    2009-01-01

    Po ilgo paie\\vskos laikotarpio, dr. N. Lietuvninkaitei padedant, KTU bibliotekos Retų knygų skyriaus kartografiniame archyve aptiktas 1915 m. JAV išleistas B. K. Balučio M 1:252 000 Suvalkijos žemėlapis. Lietuvių išeivijos instituto B. K. Balučio fonde žemėlapio sudarymo medžiagos nerasta. Paie\\vska atrodė bevilti\\vska dėl tarpukario Lietuvi\\vskosios enciklopedijos klaidinančios informacijos, kad prasidėjus Pirmajam pasauliniam karui žemėlapis nebuvo išleistas, tad aprašomas ir publikuojamas pirmą kartą.

  8. Recent technical advancements enabled atomic resolution CryoEM

    NASA Astrophysics Data System (ADS)

    Xueming, Li

    2016-01-01

    With recent breakthroughs in camera and image processing technologies single-particle electron cryo-microscopy (CryoEM) has suddenly gained the attention of structural biologists as a powerful tool able to solve the atomic structures of biological complexes and assemblies. Compared with x-ray crystallography, CryoEM can be applied to partially flexible structures in solution and without the necessity of crystallization, which is especially important for large complexes and assemblies. This review briefly explains several key bottlenecks for atomic resolution CryoEM, and describes the corresponding solutions for these bottlenecks based on the recent technical advancements. The review also aims to provide an overview about the technical differences between its applications in biology and those in material science. Project supported by Tsinghua-Peking Joint Center for Life Sciences, China.

  9. Analyses of Subnanometer Resolution Cryo-EM Density Maps

    PubMed Central

    Baker, Matthew L.; Baker, Mariah R.; Hryc, Corey F.; DiMaio, Frank

    2011-01-01

    Today, electron cryomicroscopy (cryo-EM) can routinely achieve subnanometer resolutions of complex macromolecular assemblies. From a density map, one can extract key structural and functional information using a variety of computational analysis tools. At subnanometer resolution, these tools make it possible to isolate individual subunits, identify secondary structures, and accurately fit atomic models. With several cryo-EM studies achieving resolutions beyond 5 Å, computational modeling and feature recognition tools have been employed to construct backbone and atomic models of the protein components directly from a density map. In this chapter, we describe several common classes of computational tools that can be used to analyze and model subnanometer resolution reconstructions from cryo-EM. A general protocol for analyzing subnanometer resolution density maps is presented along with a full description of steps used in analyzing the 4.3 Å resolution structure of Mm-cpn. PMID:20888467

  10. Lietuvos Teritorijos Gravimetrinio Žemėlapio Tikslumo Vertinimas

    NASA Astrophysics Data System (ADS)

    Birvydienė, Rosita; Krikštaponis, Boleslovas; Obuchovski, Romuald; Paršeliūnas, Eimuntas; Petroškevičius, Petras; Šlikas, Dominykas

    2010-01-01

    Remiantis matavimų, atliktų Lietuvos gravimetrinio tinklo punktuose, duomenimis, įvertintas Lietuvos teritorijos 1:200 000 mastelio Bouguer anomalijų gravimetrinio žemėlapio tikslumas. Vertinimui naudota 686 gravimetrinių punktų sunkio pagreičio reikšmės, kurių vidutinė kvadratinė paklaida neviršija 9 μGal. Nustatytos teritorijos, kuriose sunkio pagreitis, apskaičiuotas pagal žemėlapį, turi sistemingąsias paklaidas. Gautas vidutinis skirtumas tarp žemėlapyje taikomos Potsdamo sunkio sistemos ir IGSN 71 sistemos, apibrėžtos Lietuvos gravimetriniame tinkle atliktais absoliučiaisiais gravimetriniais matavimais.

  11. Longitudinal information and radiation damage in EM calorimetry

    SciTech Connect

    Green, D.

    1993-02-05

    The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a ``shower maximum`` detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.

  12. Geospatial Analysis of Pediatric EMS Run Density and Endotracheal Intubation

    PubMed Central

    Hansen, Matthew; Loker, William; Warden, Craig

    2016-01-01

    Introduction The association between geographic factors, including transport distance, and pediatric emergency medical services (EMS) run clustering on out-of-hospital pediatric endotracheal intubation is unclear. The objective of this study was to determine if endotracheal intubation procedures are more likely to occur at greater distances from the hospital and near clusters of pediatric calls. Methods This was a retrospective observational study including all EMS runs for patients less than 18 years of age from 2008 to 2014 in a geographically large and diverse Oregon county that includes densely populated urban areas near Portland and remote rural areas. We geocoded scene addresses using the automated address locator created in the cloud-based mapping platform ArcGIS, supplemented with manual address geocoding for remaining cases. We then use the Getis-Ord Gi spatial statistic feature in ArcGIS to map statistically significant spatial clusters (hot spots) of pediatric EMS runs throughout the county. We then superimposed all intubation procedures performed during the study period on maps of pediatric EMS-run hot spots, pediatric population density, fire stations, and hospitals. We also performed multivariable logistic regression to determine if distance traveled to the hospital was associated with intubation after controlling for several confounding variables. Results We identified a total of 7,797 pediatric EMS runs during the study period and 38 endotracheal intubations. In univariate analysis we found that patients who were intubated were similar to those who were not in gender and whether or not they were transported to a children’s hospital. Intubated patients tended to be transported shorter distances and were older than non-intubated patients. Increased distance from the hospital was associated with reduced odds of intubation after controlling for age, sex, scene location, and trauma system entry status in a multivariate logistic regression. The

  13. The photon: EM fields, electrical potentials, and AC charge

    NASA Astrophysics Data System (ADS)

    Meulenberg, A.; Hudgins, W. R.; Penland, R. F.

    2015-09-01

    Photons are here considered to be resonant oscillations (solitons) in four dimensions (space/time) of an undefined `field' otherwise generally existing at a local energy minimum. The photons' constituent EM fields result in elevated energy, and therefore potentials, within that field. It is in the context of the standing waves of and between photons that the EM fields and potentials lead to a description of alternating (AC) `currents' (of some form) of unquantized alternating `charge' (of some sort). The main topic of this paper is the alternating charge.

  14. Geospatial Analysis of Pediatric EMS Run Density and Endotracheal Intubation.

    PubMed

    Hansen, Matthew; Loker, William; Warden, Craig

    2016-09-01

    The association between geographic factors, including transport distance, and pediatric emergency medical services (EMS) run clustering on out-of-hospital pediatric endotracheal intubation is unclear. The objective of this study was to determine if endotracheal intubation procedures are more likely to occur at greater distances from the hospital and near clusters of pediatric calls. This was a retrospective observational study including all EMS runs for patients less than 18 years of age from 2008 to 2014 in a geographically large and diverse Oregon county that includes densely populated urban areas near Portland and remote rural areas. We geocoded scene addresses using the automated address locator created in the cloud-based mapping platform ArcGIS, supplemented with manual address geocoding for remaining cases. We then use the Getis-Ord Gi spatial statistic feature in ArcGIS to map statistically significant spatial clusters (hot spots) of pediatric EMS runs throughout the county. We then superimposed all intubation procedures performed during the study period on maps of pediatric EMS-run hot spots, pediatric population density, fire stations, and hospitals. We also performed multivariable logistic regression to determine if distance traveled to the hospital was associated with intubation after controlling for several confounding variables. We identified a total of 7,797 pediatric EMS runs during the study period and 38 endotracheal intubations. In univariate analysis we found that patients who were intubated were similar to those who were not in gender and whether or not they were transported to a children's hospital. Intubated patients tended to be transported shorter distances and were older than non-intubated patients. Increased distance from the hospital was associated with reduced odds of intubation after controlling for age, sex, scene location, and trauma system entry status in a multivariate logistic regression. The locations of intubations were

  15. A constrained EM algorithm for independent component analysis.

    PubMed

    Welling, M; Weber, M

    2001-03-01

    We introduce a novel way of performing independent component analysis using a constrained version of the expectation-maximization (EM) algorithm. The source distributions are modeled as D one-dimensional mixtures of gaussians. The observed data are modeled as linear mixtures of the sources with additive, isotropic noise. This generative model is fit to the data using constrained EM. The simpler "soft-switching" approach is introduced, which uses only one parameter to decide on the sub- or supergaussian nature of the sources. We explain how our approach relates to independent factor analysis.

  16. Low Bandwidth Vocoding using EM Sensor and Acoustic Signal Processing

    SciTech Connect

    Ng, L C; Holzrichter, J F; Larson, P E

    2001-10-25

    Low-power EM radar-like sensors have made it possible to measure properties of the human speech production system in real-time, without acoustic interference [1]. By combining these data with the corresponding acoustic signal, we've demonstrated an almost 10-fold bandwidth reduction in speech compression, compared to a standard 2.4 kbps LPC10 protocol used in the STU-III (Secure Terminal Unit, third generation) telephone. This paper describes a potential EM sensor/acoustic based vocoder implementation.

  17. Speaker verification using combined acoustic and EM sensor signal processing

    SciTech Connect

    Ng, L C; Gable, T J; Holzrichter, J F

    2000-11-10

    Low Power EM radar-like sensors have made it possible to measure properties of the human speech production system in real-time, without acoustic interference. This greatly enhances the quality and quantity of information for many speech related applications. See Holzrichter, Burnett, Ng, and Lea, J. Acoustic. SOC. Am . 103 ( 1) 622 (1998). By combining the Glottal-EM-Sensor (GEMS) with the Acoustic-signals, we've demonstrated an almost 10 fold reduction in error rates from a speaker verification system experiment under a moderate noisy environment (-10dB).

  18. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-28

    A paint technician with Orbital ATK, prime contractor for the Space Launch System (SLS) Booster, uses an air gun to apply paint to the right hand aft skirt for NASA’s SLS rocket inside a support building at the Hangar AF facility at Cape Canaveral Air Force Station. The space shuttle-era aft skirt, was inspected and resurfaced to prepare it for primer and paint. The aft skirt will be used on the right hand booster of the SLS rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep-space missions, and the journey to Mars.

  19. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-28

    Technicians with Orbital ATK, prime contractor for the Space Launch System (SLS) Booster, prepare the right hand aft skirt for NASA’s SLS rocket for primer and painting inside a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt, was inspected and resurfaced and will be primed and painted for use on the right hand booster of the SLS rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep-space missions, and the journey to Mars.

  20. Orion EM-1 Booster Preps - Aft Skirt Preps/Painting

    NASA Image and Video Library

    2016-10-28

    Technicians with Orbital ATK, prime contractor for the Space Launch System (SLS) Booster, prepare a paint mixture for the right hand aft skirt for NASA’s SLS in a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt, was inspected and resurfaced, and will be primed and painted for use on the right hand booster of the SLS rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep-space missions, and the Journey to Mars.

  1. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  2. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) into a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  3. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) is in a clean room with protective walls secured around it. The adapter will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  4. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) toward a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  5. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a Lockheed Martin technician secures a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  6. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) is being moved to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  7. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a protective cover is installed around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  8. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  9. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians are preparing the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for the move into a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  10. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  11. Orion EM-1 Crew Module Adapter Move to Clean Room

    NASA Image and Video Library

    2016-11-29

    Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians begin to move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

  12. A emissão em 8mm e as bandas de Merrill-Sanford em estrelas carbonadas

    NASA Astrophysics Data System (ADS)

    de Mello, A. B.; Lorenz-Martins, S.

    2003-08-01

    Estrelas carbonadas possuem bandas moleculares em absorção no visível e, no infravermelho (IR) as principais características espectrais se devem a emissão de grãos. Recentemente foi detectada a presença de bandas de SiC2 (Merrill-Sanford, MS) em emissão sendo atribuída à presença de um disco rico em poeira. Neste trabalho analisamos uma amostra de 14 estrelas carbonadas, observadas no telescópio de 1.52 m do ESO em 4 regiões espectrais diferentes, a fim de detectar as bandas de MS em emissão. Nossa amostra é composta de estrelas que apresentam além da emissão em 11.3 mm, outra em 8 mm. Esta última emissão, não usual nestes objetos, tem sido atribuída ou a moléculas de C2H2, ou a um composto sólido ainda indefinido. A detecção de emissões de MS e aquelas no IR, simultaneamente, revelaria um cenário mais complexo que o habitualmente esperado para os ventos destes objetos. No entanto como primeiro resultado, verificamos que as bandas de Merrill-Sanford encontram-se em absorção, não revelando nenhuma conexão com a emissão a 8 mm. Assim, temos duas hipóteses: (a) a emissão a 8 mm se deve à molécula C2H2 ou (b) essa emissão é resultado da emissão térmica de grãos. Testamos a segunda hipótese modelando a amostra com grãos não-homogêneos de SiC e quartzo, o qual emite em aproximadamente 8mm. Este grão seria produzido em uma fase evolutiva anterior a das carbonadas (estrelas S) e por terem uma estrutura cristalina são destruídos apenas na presença de campos de radiação ultravioleta muito intensos. Os modelos para os envoltórios utilizam o método de Monte Carlo para descrever o problema do transporte da radiação. As conclusões deste trabalho são: (1) as bandas de Merrill-Sanford se encontram em absorção, sugerindo um cenário usual para os ventos das estrelas da amostra; (2) neste cenário, a emissão em 8 mm seria resultado de grãos de quartzo com mantos de SiC, indicando que o quartzo poderia sobreviver a fase

  13. Item Parameter Estimation via Marginal Maximum Likelihood and an EM Algorithm: A Didactic.

    ERIC Educational Resources Information Center

    Harwell, Michael R.; And Others

    1988-01-01

    The Bock and Aitkin Marginal Maximum Likelihood/EM (MML/EM) approach to item parameter estimation is an alternative to the classical joint maximum likelihood procedure of item response theory. This paper provides the essential mathematical details of a MML/EM solution and shows its use in obtaining consistent item parameter estimates. (TJH)

  14. An EM System with Dynamic Multi-Axis Transmitter and Tensor Gradiometer Receiver

    DTIC Science & Technology

    2011-06-01

    FINAL REPORT An EM System With Dynamic Multi-Axis Transmitter and Tensor Gradiometer Receiver SERDP Project MR-1534 JUNE 2011 David C...2006- 2010 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER An EM System with Dynamic Multi-Axis transmitter and Tensor Gradiometer W91 2HQ-06-C-0050...239.18 EM Tensor Gradiometer SERDP MM-1532 i Contents Contents

  15. Texas Hold 'em Online Poker: A Further Examination

    ERIC Educational Resources Information Center

    Hopley, Anthony A. B.; Dempsey, Kevin; Nicki, Richard

    2012-01-01

    Playing Texas Hold 'em Online Poker (THOP) is on the rise. However, there is relatively little research examining factors that contribute to problem gambling in poker players. The aim of this study was to extend the research findings of Hopley and Nicki (2010). The negative mood states of depression, anxiety and stress were found to be linked to…

  16. Texas Hold 'em Online Poker: A Further Examination

    ERIC Educational Resources Information Center

    Hopley, Anthony A. B.; Dempsey, Kevin; Nicki, Richard

    2012-01-01

    Playing Texas Hold 'em Online Poker (THOP) is on the rise. However, there is relatively little research examining factors that contribute to problem gambling in poker players. The aim of this study was to extend the research findings of Hopley and Nicki (2010). The negative mood states of depression, anxiety and stress were found to be linked to…

  17. Noise properties of the EM algorithm: II. Monte Carlo simulations.

    PubMed

    Wilson, D W; Tsui, B M; Barrett, H H

    1994-05-01

    In an earlier paper we derived a theoretical formulation for estimating the statistical properties of images reconstructed using the iterative ML-EM algorithm. To gain insight into this complex problem, two levels of approximation were considered in the theory. These techniques revealed the dependence of the variance and covariance of the reconstructed image noise on the source distribution, imaging system transfer function, and iteration number. In this paper a Monte Carlo approach was taken to study the noise properties of the ML-EM algorithm and to test the predictions of the theory. The study also served to evaluate the approximations used in the theory. Simulated data from phantoms were used in the Monte Carlo experiments. The ML-EM statistical properties were calculated from sample averages of a large number of images with different noise realizations. The agreement between the more exact form of the theoretical formulation and the Monte Carlo formulation was better than 10% in most cases examined, and for many situations the agreement was within the expected error of the Monte Carlo experiments. Results from the studies provide valuable information about the noise characteristics of ML-EM reconstructed images. Furthermore, the studies demonstrate the power of the theoretical and Monte Carlo approaches for investigating noise properties of statistical reconstruction algorithms.

  18. EMS-generated Rhizoctonia resistance in an adapted wheat

    USDA-ARS?s Scientific Manuscript database

    We report the first genetic resistance in wheat to Rhizoctonia solani AG-8 and R. oryzae, the causal agents of Rhizoctonia root rot and pre-emergence damping-off. Rhizoctonia resistance was generated in the spring wheat cultivar Scarlet using EMS mutagenesis. Resistant plants, named Scarlet-Rz1, d...

  19. Functionalized Anatomical Models for EM-Neuron Interaction Modeling

    PubMed Central

    Neufeld, Esra; Cassará, Antonino Mario; Montanaro, Hazael; Kuster, Niels; Kainz, Wolfgang

    2017-01-01

    The understanding of interactions between electromagnetic (EM) fields and nerves are crucial in contexts ranging from therapeutic neurostimulation to low frequency EM exposure safety. To properly consider the impact of in-vivo induced field inhomogeneity on non-linear neuronal dynamics, coupled EM-neuronal dynamics modeling is required. For that purpose, novel functionalized computable human phantoms have been developed. Their implementation and the systematic verification of the integrated anisotropic quasi-static EM solver and neuronal dynamics modeling functionality, based on the method of manufactured solutions and numerical reference data, is described. Electric and magnetic stimulation of the ulnar and sciatic nerve were modeled to help understanding a range of controversial issues related to the magnitude and optimal determination of strength-duration (SD) time constants. The results indicate the importance of considering the stimulation-specific inhomogeneous field distributions (especially at tissue interfaces), realistic models of non-linear neuronal dynamics, very short pulses, and suitable SD extrapolation models. These results and the functionalized computable phantom will influence and support the development of safe and effective neuroprosthetic devices and novel electroceuticals. Furthermore they will assist the evaluation of existing low frequency exposure standards for the entire population under all exposure conditions. PMID:27224508

  20. Symmetry-restrained flexible fitting for symmetric EM maps

    PubMed Central

    Chan, Kwok-Yan; Gumbart, James; McGreevy, Ryan; Watermeyer, Jean M.; Sewell, B. Trevor; Schulten, Klaus

    2011-01-01

    Summary Many large biological macromolecules have inherent structural symmetry, being composed of a few distinct subunits, repeated in a symmetric array. These complexes are often not amenable to traditional high-resolution structural determination methods, but can be imaged in functionally relevant states using cryo-electron microscopy (cryo-EM). A number of methods for fitting atomic-scale structures into cryo-EM maps have been developed, including the molecular dynamics flexible fitting (MDFF) method. However, quality and resolution of the cryo-EM map are the major determinants of a method’s success. In order to incorporate knowledge of structural symmetry into the fitting procedure, we developed the symmetry-restrained MDFF method. The new method adds to the cryo-EM map-derived potential further restraints on the allowed conformations of a complex during fitting, thereby improving the quality of the resultant structure. The benefit of using symmetry-based restraints during fitting, particularly for medium to low-resolution data, is demonstrated for three different systems. PMID:21893283

  1. Reservoir characterization and steam flood monitoring with crosshole EM

    SciTech Connect

    Wilt, M.; Torres-Verdin, C.

    1995-06-01

    Crosshole electromagnetic (EM) imaging is applied to reservoir characterization and steam flood monitoring in a central California oil field. Steam was injected into three stacked eastward-dipping, unconsolidated oil sands within the upper 200 m. The steam plume is expected to develop as an ellipse aligned with the regional northwest-southeast strike. EM measurements were made from two fiberglass-cased observation wells straddling the steam injector on a northeast-southwest profile using the LLNL frequency domain crosshole EM system. Field data were collected before the initiation of a steam drive to map the distribution of the oil sands and then 6 and 12 months later to monitor the progress of the steam chest. Resistivity images derived from the EM data before steam injection clearly delineate the distribution and dipping structure on the target oil sands. Difference images, from data collected before and after steam flooding, show resistivity changes that indicate that the steam chest has developed only in the deeper oil sands although steam injection occurred in all three sand layers.

  2. Signs and Guides: Wayfinding Alternatives for the EMS Library.

    ERIC Educational Resources Information Center

    Johnson, Johanna H.

    Concerned with increasing the accessibility of the collection of the Engineering/Math Sciences (EMS) Library at the University of California at Los Angeles through the use of self guidance systems, this practical study focused on the problem context, general library guides, and library signage in reviewing the literature, and conducted a survey of…

  3. Functionalized anatomical models for EM-neuron Interaction modeling

    NASA Astrophysics Data System (ADS)

    Neufeld, Esra; Cassará, Antonino Mario; Montanaro, Hazael; Kuster, Niels; Kainz, Wolfgang

    2016-06-01

    The understanding of interactions between electromagnetic (EM) fields and nerves are crucial in contexts ranging from therapeutic neurostimulation to low frequency EM exposure safety. To properly consider the impact of in vivo induced field inhomogeneity on non-linear neuronal dynamics, coupled EM-neuronal dynamics modeling is required. For that purpose, novel functionalized computable human phantoms have been developed. Their implementation and the systematic verification of the integrated anisotropic quasi-static EM solver and neuronal dynamics modeling functionality, based on the method of manufactured solutions and numerical reference data, is described. Electric and magnetic stimulation of the ulnar and sciatic nerve were modeled to help understanding a range of controversial issues related to the magnitude and optimal determination of strength-duration (SD) time constants. The results indicate the importance of considering the stimulation-specific inhomogeneous field distributions (especially at tissue interfaces), realistic models of non-linear neuronal dynamics, very short pulses, and suitable SD extrapolation models. These results and the functionalized computable phantom will influence and support the development of safe and effective neuroprosthetic devices and novel electroceuticals. Furthermore they will assist the evaluation of existing low frequency exposure standards for the entire population under all exposure conditions.

  4. DOE-EM Science of Safety Robotics Challenge

    ScienceCinema

    Rimando, Rodrigo; Watts, Alex; Bobbitt, John; McLaughlin, Doug; Quigley, Morgan; Gladwell, Scott; McLoughlin, Mike; Kinnamon, Tony; Garcia, Joe; Ansari, Alex; Voyles, Richard; Chambers, David; Pryor, Mitch; Workman, Theresa; Mehling, Joshua; Browning, Kimberly; Deuel, Jake; Profitt, Bryan; Reibold, Marty

    2016-10-19

    During the week of August 22nd, 2016, over 150 technologists, stakeholders, and Department of Energy, Office of Environmental Management workers, met at DOE’s Portsmouth Gaseous Diffusion Plant in Ohio, for the EM Science of Safety Robotics Challenge.

  5. <em>An Amphibious Magnetotelluric Investigation of the Cascadian Seismogenic and ETS zones.em>

    NASA Astrophysics Data System (ADS)

    Parris, B. A.; Livelybrooks, D.; Bedrosian, P.; Egbert, G. D.; Key, K.; Schultz, A.; Cook, A.; Kant, M.; Wogan, N.; Zeryck, A.

    2015-12-01

    The amphibious Magnetotelluric Observations of Cascadia using a Huge Array (MOCHA) experiment seeks to address unresolved questions about the seismogenic locked zone and down-dip transition zone where episodic tremor and slip (ETS) originates. The presence of free fluids is thought to be one of the primary controls on ETS behavior within the Cascadia margin. Since the bulk electrical conductivity in the crust and mantle can be greatly increased by fluids, magnetotelluric(MT) observations can offer unique insights on the fluid distribution and its relation to observed ETS behavior. Here we present preliminary results from the 146 MT stations collected for the MOCHA project. MOCHA is unique in that it is the first amphibious array of MT stations occupied to provide for 3-D interpretation of conductivity structure of a subduction zone. The MOCHA data set comprises 75 onshore stations and 71 offshore stations, accumulated over a two-year period, and located on an approximate 25km grid, spanning from the trench to the Eastern Willamette Valley, and from central Oregon into middle Washington. We present the results of a series of east-west (cross-strike) oriented, two-dimensional inversions created using the MARE2DEM software that provide an initial picture of the conductivity structure of the locked and ETS zones and its along strike variations. Our models can be used to identify correlations between ETS occurrence rates and inferred fluid concentrations. Our modeling explores the impact of various parameterizations on 2-D inversion results, including inclusion of a smoothness penalty reduction along the inferred slab interface. This series of 2-D inversions can then be used collectively to help make and guide an a priori 3-D inversion. In addition we will present a preliminary 3-D inversion of the onshore stations created using the ModEM software. We are currently working on modifying ModEM to support inversion of offshore data. The more computationally intensive 3-D

  6. High school allied health students and their exposure to the profession of EMS.

    PubMed

    Holloman, Joshua B; Hubble, Michael W

    2012-06-01

    Ensuring a stable Emergency Medical Services (EMS) workforce is a growing concern, and effective recruiting strategies are needed to expose young adults to the EMS profession. The objective of this study was to assess the exposure of high school allied health students to EMS as a career option, as well as measure their attitudes and beliefs about the EMS profession. Hypothesis Few high school allied health students are exposed to EMS educational and career opportunities. A convenience sample of allied health students in a rural high school system was surveyed about exposure to EMS, career intentions, factors impacting career decisions, and attitudes and beliefs about EMS. Descriptive statistics were calculated, and intention to pursue an EMS career was modeled using logistic regression. Of 171 students enrolled in allied health courses across six high schools, 135 (78.9%) agreed to participate; 85.2% were female. Almost all (92.6%) respondents intended to pursue a health career, but only 43.0% reported that their allied health course exposed them to EMS as a profession. Few participants (37.7%) were knowledgeable about EMS associate degree or baccalaureate degree (27.4%) programs. Only 20.7% of the respondents intended to pursue EMS as a career, although 46.0% wanted to learn more about the profession. Most (68.2%) students expressed interest in an emergency medical technician (EMT) course if one were offered, and 80.0% were interested in a ride-along program. Independent predictors of pursuing an EMS career included exposure to EMS outside of high school (OR = 7.4, 95% CI = 1.7-30.4); media influence on career choice (OR = 9.6, 95% CI = 1.8-50.1); and the belief that EMS was mentally challenging (OR = 15.9, 95% CI = 1.1-216.6). Negative predictors included the beliefs that an EMS career was stimulating (OR = 0.05, 95% CI = 0.00-0.53) and physically challenging (OR = 0.06, 95% CI = 0.00-0.63); as well as prior exposure to an EMS job advertisement (OR = 0.14, 0

  7. GPS computer navigators to shorten EMS response and transport times.

    PubMed

    Ota, F S; Muramatsu, R S; Yoshida, B H; Yamamoto, L G

    2001-05-01

    GPS (global positioning satellite system to determine one's position on earth) units have become inexpensive and compact. The purpose of this study is to assess the effectiveness of a GPS enhanced computer street map navigator to improve the ability of EMS drivers in an urban setting to locate their destination and shorten response times. For part I, residential addresses in the city were randomly selected from a telephone directory. Two driver/navigator teams were assigned to drive to the address adhering to speed limits. One team used a standard street map, whereas the other team used a GPS computer navigator. The travel time and distance of the runs were compared. For part II, the computer GPS navigator was placed on an ambulance to supplement their normal methods of navigation to find the address requesting EMS. After the run was completed, EMS providers were interviewed to determine their opinion of whether the GPS navigator was helpful. For part I the results showed that in the 29 initial test runs, comparing the GPS team versus the standard map team, the mean distances traveled were 8.7 versus 9.0 kilometers (not significant) and the mean travel times were 13.5 versus 14.6 minutes (P=.02), respectively. The GPS team arrived faster in 72% runs. For part II the results showed that most EMS providers surveyed noted that the GPS computer navigator enhanced their ability to find the destination and all EMS providers acknowledged that it would enhance their ability to find a destination in an area in which they were unfamiliar. These results suggest that a portable GPS computer navigator system is helpful and can enhance the ability of prehospital care providers to locate their destination. Because these units are accurate and inexpensive, GPS computer navigators may be a valuable tool in reducing pre-hospital transport times.

  8. The B and Be States of the Star EM Cepheus

    NASA Astrophysics Data System (ADS)

    Kjurkchieva, Diana; Marchev, Dragomir; Sigut, T. A. A.; Dimitrov, Dinko

    2016-09-01

    We present 11 yr of high-resolution, spectroscopic observations for the star EM Cep. EM Cep switches between B and Be star states, as revealed by the level of Hα emission, but spends most of its time in the B star state. EM Cep has been considered to be an eclipsing, near-contact binary of nearly equal-mass B stars in order to reproduce regular photometric variations; however, this model is problematic due to the lack of any observed Doppler shift in the spectrum. Our observations confirm that there are no apparent Doppler shifts in the wide spectral lines Hα and He i λ6678 in either the B or Be star states. The profiles of He i λ6678 typically exhibited a filled-in absorption core, but we detected weak emission in this line during the highest Be state. Given the lack of observed Doppler shifts, we model EM Cep as an isolated Be star with a variable circumstellar disk. We can reproduce the observed Hα emission profiles over the 11 yr period reasonably well with disk masses on the order of 3{--}10× {10}-11 {M}* in the Be state with the circumstellar disk seen at an inclination of 78° to the line of sight. From a disk ejection episode in 2014, we estimate a mass-loss rate of ≈ 3× {10}-9 {M}⊙ {{yr}}-1. The derived disk density parameters are typical of those found for the classical Be stars. We therefore suggest that the EM Cep is a classical Be star and that its photometric variations are the result of β Cep or nonradial pulsations.

  9. Correlates of suicidality in firefighter/EMS personnel.

    PubMed

    Martin, Colleen E; Tran, Jana K; Buser, Sam J

    2017-01-15

    Firefighter and Emergency Medical Services (EMS) personnel experience higher rates of lifetime suicidal ideation and attempts than the general population and other protective service professions. Several correlates of suicidality (alcohol use, depression, posttraumatic stress) have been identified in the literature as applicable to firefighter/EMS populations; however, few studies to date have examined the specific correlates of suicidality (lifetime suicidal ideation and/or attempts) in a firefighter/EMS sample. Participants (N=3036) from a large, urban fire department completed demographic and self-report measures of alcohol dependence, depression, posttraumatic stress disorder (PTSD) symptom severity, and lifetime suicidal ideation and attempts. Participants in this sample performed both firefighter and EMS duties, were predominately male (97%), White (61.6%), and 25-34 years old (32.1%). Through hierarchical linear regressions, depression (β=.22, p<.05) and PTSD symptom severity (β=.21, p<.05) were significantly associated with lifetime suicidal ideation (R(2) =17.5). Depression (β=.15, p<.001), and PTSD symptom severity (β=.07, p<.01) were significantly associated with lifetime suicide attempts (R(2)=5.1). Several limitations are addressed in the current study. The survey was a self-report pre-existing dataset and lifetime suicidal ideation and attempts were measured using sum scores. Additionally, the disproportionately large sample of males and large, urban setting, may not generalize to female firefighters and members of rural community fire departments. The current study highlights the importance of targeting depression and PTSD symptom severity in efforts to reduce suicidality in firefighter/EMS personnel. Published by Elsevier B.V.

  10. ATTRACT-EM: A New Method for the Computational Assembly of Large Molecular Machines Using Cryo-EM Maps

    PubMed Central

    de Vries, Sjoerd J.; Zacharias, Martin

    2012-01-01

    Many of the most important functions in the cell are carried out by proteins organized in large molecular machines. Cryo-electron microscopy (cryo-EM) is increasingly being used to obtain low resolution density maps of these large assemblies. A new method, ATTRACT-EM, for the computational assembly of molecular assemblies from their components has been developed. Based on concepts from the protein-protein docking field, it utilizes cryo-EM density maps to assemble molecular subunits at near atomic detail, starting from millions of initial subunit configurations. The search efficiency was further enhanced by recombining partial solutions, the inclusion of symmetry information, and refinement using a molecular force field. The approach was tested on the GroES-GroEL system, using an experimental cryo-EM map at 23.5 Å resolution, and on several smaller complexes. Inclusion of experimental information on the symmetry of the systems and the application of a new gradient vector matching algorithm allowed the efficient identification of docked assemblies in close agreement with experiment. Application to the GroES-GroEL complex resulted in a top ranked model with a deviation of 4.6 Å (and a 2.8 Å model within the top 10) from the GroES-GroEL crystal structure, a significant improvement over existing methods. PMID:23251350

  11. DeepEM3D: approaching human-level performance on 3D anisotropic EM image segmentation.

    PubMed

    Zeng, Tao; Wu, Bian; Ji, Shuiwang

    2017-08-15

    Progress in 3D electron microscopy (EM) imaging has greatly facilitated neuroscience research in high-throughput data acquisition. Correspondingly, high-throughput automated image analysis methods are necessary to work on par with the speed of data being produced. One such example is the need for automated EM image segmentation for neurite reconstruction. However, the efficiency and reliability of current methods are still lagging far behind human performance. Here, we propose DeepEM3D, a deep learning method for segmenting 3D anisotropic brain electron microscopy images. In this method, the deep learning model can efficiently build feature representation and incorporate sufficient multi-scale contextual information. We propose employing a combination of novel boundary map generation methods with optimized model ensembles to address the inherent challenges of segmenting anisotropic images. We evaluated our method by participating in the 3D segmentation of neurites in EM images (SNEMI3D) challenge. Our submission is ranked #1 on the current leaderboard as of Oct 15, 2016. More importantly, our result was very close to human-level performance in terms of the challenge evaluation metric: namely, a Rand error of 0.06015 versus the human value of 0.05998. The code is available at https://github.com/divelab/deepem3d/. sji@eecs.wsu.edu. Supplementary data are available at Bioinformatics online.

  12. Effects of caffeine or EDTA post-treatment on EMS mutagenesis in soybean.

    PubMed

    Zhu, B; Gu, A; Deng, X; Geng, Y; Lu, Z

    1995-04-01

    Seeds of soybean cultivar LD4 were mutagenically treated with EMS (0.3, 0.5, 0.6, 0.9, 1.5 and 1.8%) for 3 h only or plus caffeine (50 mM) or EDTA (1 mM) post-treatment for 5 h. The experimental results indicated that: (1) of the different concentrations of EMS treatment, the M2 mutation frequency induced with 0.6% EMS was the highest (9.7%). When the EMS concentration was over 0.9%, the mutation frequency decreased rapidly. (2) Of the EMS treatments plus caffeine or EDTA post-treatment, the mutagenic effect of 0.6% EMS was the best for inducing morphological variations. Caffeine post-treatment decreased notably the mutation frequency of EMS treatment; when concentrations of EMS were very high (1.5% and 1.8%), mutation frequencies of EDTA post-treatment were still 5.0% and 4.88%, but no mutants were found in EMS treatment or plus caffeine post-treatment. (3) In the M2 mutation spectrum, 11 kinds of mutant types were observed in EMS treatment or plus caffeine or EDTA post-treatment. Relative frequencies of some mutant types (growth period, plant height, grain size, leaf shape and sterility, etc.) were similar among the three treatments, but EDTA post-treatment could change the relative frequencies of yield characteristics (number of pods and grains, grain weight/plant) induced by EMS treatment only.

  13. Composting of rice straw with effective microorganisms (EM) and its influence on compost quality

    PubMed Central

    2013-01-01

    This study aims to assess the effect of EM application on the composting process of rice straw with goat manure and green waste and to evaluate the quality of both compost treatments. There are two treatment piles in this study, in which one pile was applied with EM and another pile without EM. Each treatment was replicated three times with 90 days of composting duration. The parameters for the temperature, pH, TOC and C/N ratio, show that decomposition of organic matter occurs during the 90-day period. The t-test conducted shows that there is a significant difference between compost with EM and compost without EM. The application of EM in compost increases the macro and micronutrient content. The following parameters support this conclusion: compost applied with EM has more N, P and K content (P < 0.05) compared to compost without EM. Although the Fe in compost with EM is much higher (P < 0.05) than in the compost without EM, for Zn and Cu, there is no significant difference between treatments. This study suggests that the application of EM is suitable to increase the mineralization in the composting process. The final resultant compost indicated that it was in the range of the matured level and can be used without any restriction. PMID:23390930

  14. Application of Electromagnetic (EM) Separation Technology to Metal Refining Processes: A Review

    NASA Astrophysics Data System (ADS)

    Zhang, Lifeng; Wang, Shengqian; Dong, Anping; Gao, Jianwei; Damoah, Lucas Nana Wiredu

    2014-12-01

    Application of electromagnetic (EM) force to metal processing has been considered as an emerging technology for the production of clean metals and other advanced materials. In the current paper, the principle of EM separation was introduced and several schemes of imposing EM field, such as DC electric field with a crossed steady magnetic field, AC electric field, AC magnetic field, and traveling magnetic field were reviewed. The force around a single particle or multi-particles and their trajectories in the conductive liquid under EM field were discussed. Applications of EM technique to the purification of different liquid metals such as aluminum, zinc, magnesium, silicon, copper, and steel were summarized. Effects of EM processing parameters, such as the frequency of imposed field, imposed magnetic flux density, processing time, particle size, and the EM unit size on the EM purification efficiency were discussed. Experimental and theoretical investigations have showed that the separation efficiency of inclusions from the molten aluminum using EM purification could as high as over 90 pct. Meanwhile, the EM purification was also applied to separate intermetallic compounds from metal melt, such as α-AlFeMnSi-phase from the molten aluminum. And then the potential industrial application of EM technique was proposed.

  15. Development of the Emergency Medical Services Role Identity Scale (EMS-RIS).

    PubMed

    Donnelly, Elizabeth A; Siebert, Darcy; Siebert, Carl

    2015-01-01

    This article describes the development and validation of the theoretically grounded Emergency Medical Services Role Identity Scale (EMS-RIS), which measures four domains of EMS role identity. The EMS-RIS was developed using a mixed methods approach. Key informants informed item development and the scale was validated using a representative probability sample of EMS personnel. Factor analyses revealed a conceptually consistent, four-factor solution with sound psychometric properties as well as evidence of convergent and discriminant validities. Social workers work with EMS professionals in crisis settings and as their counselors when they are distressed. The EMS-RIS provides useful information for the assessment of and intervention with distressed EMS professionals, as well as how role identity may influence occupational stress.

  16. Nonlinear Smoothing and the EM Algorithm for Positive Integral Equations of the First Kind

    SciTech Connect

    Eggermont, P. P. B.

    1999-01-15

    We study a modification of the EMS algorithm in which each step of the EMS algorithm is preceded by a nonlinear smoothing step of the form Nf-exp(S*log f) , where S is the smoothing operator of the EMS algorithm. In the context of positive integral equations (a la positron emission tomography) the resulting algorithm is related to a convex minimization problem which always admits a unique smooth solution, in contrast to the unmodified maximum likelihood setup. The new algorithm has slightly stronger monotonicity properties than the original EM algorithm. This suggests that the modified EMS algorithm is actually an EM algorithm for the modified problem. The existence of a smooth solution to the modified maximum likelihood problem and the monotonicity together imply the strong convergence of the new algorithm. We also present some simulation results for the integral equation of stereology, which suggests that the new algorithm behaves roughly like the EMS algorithm.

  17. Similarity-regulation of OS-EM for accelerated SPECT reconstruction

    NASA Astrophysics Data System (ADS)

    Vaissier, P. E. B.; Beekman, F. J.; Goorden, M. C.

    2016-06-01

    Ordered subsets expectation maximization (OS-EM) is widely used to accelerate image reconstruction in single photon emission computed tomography (SPECT). Speedup of OS-EM over maximum likelihood expectation maximization (ML-EM) is close to the number of subsets used. Although a high number of subsets can shorten reconstruction times significantly, it can also cause severe image artifacts such as improper erasure of reconstructed activity if projections contain few counts. We recently showed that such artifacts can be prevented by using a count-regulated OS-EM (CR-OS-EM) algorithm which automatically adapts the number of subsets for each voxel based on the estimated number of counts that the voxel contributed to the projections. While CR-OS-EM reached high speed-up over ML-EM in high-activity regions of images, speed in low-activity regions could still be very slow. In this work we propose similarity-regulated OS-EM (SR-OS-EM) as a much faster alternative to CR-OS-EM. SR-OS-EM also automatically and locally adapts the number of subsets, but it uses a different criterion for subset regulation: the number of subsets that is used for updating an individual voxel depends on how similar the reconstruction algorithm would update the estimated activity in that voxel with different subsets. Reconstructions of an image quality phantom and in vivo scans show that SR-OS-EM retains all of the favorable properties of CR-OS-EM, while reconstruction speed can be up to an order of magnitude higher in low-activity regions. Moreover our results suggest that SR-OS-EM can be operated with identical reconstruction parameters (including the number of iterations) for a wide range of count levels, which can be an additional advantage from a user perspective since users would only have to post-filter an image to present it at an appropriate noise level.

  18. An economic toolkit for identifying the cost of emergency medical services (EMS) systems: detailed methodology of the EMS Cost Analysis Project (EMSCAP).

    PubMed

    Lerner, E Brooke; Garrison, Herbert G; Nichol, Graham; Maio, Ronald F; Lookman, Hunaid A; Sheahan, William D; Franz, Timothy R; Austad, James D; Ginster, Aaron M; Spaite, Daniel W

    2012-02-01

    Calculating the cost of an emergency medical services (EMS) system using a standardized method is important for determining the value of EMS. This article describes the development of a methodology for calculating the cost of an EMS system to its community. This includes a tool for calculating the cost of EMS (the "cost workbook") and detailed directions for determining cost (the "cost guide"). The 12-step process that was developed is consistent with current theories of health economics, applicable to prehospital care, flexible enough to be used in varying sizes and types of EMS systems, and comprehensive enough to provide meaningful conclusions. It was developed by an expert panel (the EMS Cost Analysis Project [EMSCAP] investigator team) in an iterative process that included pilot testing the process in three diverse communities. The iterative process allowed ongoing modification of the toolkit during the development phase, based upon direct, practical, ongoing interaction with the EMS systems that were using the toolkit. The resulting methodology estimates EMS system costs within a user-defined community, allowing either the number of patients treated or the estimated number of lives saved by EMS to be assessed in light of the cost of those efforts. Much controversy exists about the cost of EMS and whether the resources spent for this purpose are justified. However, the existence of a validated toolkit that provides a standardized process will allow meaningful assessments and comparisons to be made and will supply objective information to inform EMS and community officials who are tasked with determining the utilization of scarce societal resources.

  19. Compassionate Options for Pediatric EMS (COPE): Addressing Communication Skills.

    PubMed

    Calhoun, Aaron W; Sutton, Erica R H; Barbee, Anita P; McClure, Beth; Bohnert, Carrie; Forest, Richard; Taillac, Peter; Fallat, Mary E

    2017-01-01

    Each year, 16,000 children suffer cardiopulmonary arrest, and in one urban study, 2% of pediatric EMS calls were attributed to pediatric arrests. This indicates a need for enhanced educational options for prehospital providers that address how to communicate to families in these difficult situations. In response, our team developed a cellular phone digital application (app) designed to assist EMS providers in self-debriefing these events, thereby improving their communication skills. The goal of this study was to pilot the app using a simulation-based investigative methodology. Video and didactic app content was generated using themes developed from a series of EMS focus groups and evaluated using volunteer EMS providers assessed during two identical nonaccidental trauma simulations. Intervention groups interacted with the app as a team between assessments, and control groups debriefed during that period as they normally would. Communication performance and gap analyses were measured using the Gap-Kalamazoo Consensus Statement Assessment Form. A total of 148 subjects divided into 38 subject groups (18 intervention groups and 20 control groups) were assessed. Comparison of initial intervention group and control group scores showed no statistically significant difference in performance (2.9/5 vs. 3.0/5; p = 0.33). Comparisons made during the second assessment revealed a statistically significant improvement in the intervention group scores, with a moderate to large effect size (3.1/5 control vs. 4.0/5 intervention; p < 0.001, r = 0.69, absolute value). Gap analysis data showed a similar pattern, with gaps of -0.6 and -0.5 (values suggesting team self-over-appraisal of communication abilities) present in both control and intervention groups (p = 0.515) at the initial assessment. This gap persisted in the control group at the time of the second assessment (-0.8), but was significantly reduced (0.04) in the intervention group (p = 0.013, r = 0.41, absolute value

  20. Portable suction unit failure in a rural EMS system.

    PubMed

    Risavi, Brian L; Sabotchick, K J; Heile, Christopher J

    2013-08-01

    Portable suction units used by EMS personnel are utilized infrequently and often are powered by batteries. Lack of use and inspection often results in failure of the device when it is needed. The purpose of this study was to examine the incidence of portable suction unit failure in a rural EMS system and to identify the reasons for failures. A convenience sample was obtained through both random inspections by the staff of a regional EMS council and data from twice monthly checks reported by respective EMS agencies following a standard protocol for each unit. A standard protocol was used, including checking the vacuum level on each suction unit and inspecting the tubing, canister, and battery. Each inspector assessed whether the unit was capable of achieving 300 mmHg of suction within four seconds. Also, the unit was inspected for any signs of misalignment or dry rot of the gasket, kinking of suction hose, damage to the suction canister, weak/dead battery, or defective pump. Findings were recorded. Over a two-year period, 9,631 suction unit inspections were completed. There were 233 failures (2.4%) noted. The majority (126, 54.1%) were due to battery failure. Seventy-three units failed due to other reasons (not recorded, switch failure, battery not seated). Ten inspections failed due to incorrect assembly. Nineteen inspections failed due to defects with the suction canister. Five inspections failed due to kinked/disconnected suction tubing. Only a relatively small percentage of inspections of suction units revealed failures (4.6% Advanced Life Support, 8.6% Basic Life Support) using the above-stated criteria. However, given the importance of airway management and potential complications associated with airway compromise, including aspiration pneumonia, hypoxia, and hemodynamic instability, this is of concern relative to the morbidity and mortality that could be related to airway failure. Due to the relative infrequency of use and the nature of portable suction units

  1. Translation of EMS: clinical practice and system oversight from core content study guide to best practices implementation in an Urban EMS system.

    PubMed

    Tataris, Katie; Mercer, Mary; Brown, John

    2015-01-01

    Since 2009, the seminal text in emergency medical services (EMS) medicine has been used to guide the academic development of the new subspecialty but direct application of the material into EMS oversight has not been previously described. The EMS/Disaster Medicine fellowship program at our institution scheduled a monthly meeting to systematically review the text and develop a study guide to assist the fellow and affiliated faculty in preparation for the board examination. In addition to the summary of chapter content, the review included an assessment of areas from each chapter subject where our EMS system did not exhibit recommended characteristics. A matrix was developed in the form of a gap analysis to include specific recommendations based on each perceived gap. Initial review and completion dates for each identified gap enable tracking and a responsible party. This matrix assisted the fellow with development of projects for EMS system improvement in addition to focusing and prioritizing the work of other interested physicians working in the system. By discussing expert recommendations in the setting of an actual EMS system, the faculty can teach the fellow how to approach system improvements based on prior experiences and current stakeholders. This collaborative environment facilitates system-based practice and practice-based learning, aligning with ACGME core competencies. Our educational model has demonstrated the success of translating the text into action items for EMS systems. This model may be useful in other systems and could contribute to the development of EMS system standards nationwide.

  2. Orion EM-1 Heat Shield Offload, Transport, and Lift

    NASA Image and Video Library

    2016-08-26

    Technicians with Jacobs on the Test and Operations Support Contract have positioned a platform close to NASA’s Super Guppy aircraft at the Shuttle Landing Facility, managed and operated by Space Florida, at the agency’s Kennedy Space Center in Florida, for offloading of the shipping container carrying the Orion heat shield for Exploration Mission 1 (EM-1). The heat shield will be offloaded and transported to the Neil Armstrong Operations and Checkout Building high bay for processing. The heat shield arrived from Lockheed Martin’s manufacturing facility near Denver. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, an uncrewed test flight, in 2018.

  3. Event reconstruction in NEXT using the ML-EM algorithm

    NASA Astrophysics Data System (ADS)

    Simón, A.; Ferrario, P.; Izmaylov, A.; NEXT Collaboration

    2016-04-01

    The NEXT collaboration aims to find the neutrinoless double beta decay in 136Xe. The rareness of this decay demands an exceptional background rejection. This can be obtained with an excellent energy resolution, which has been already demonstrated in the NEXT prototypes. In addition to this, the ββ 0 ν decay in gas produces a characteristic topological signal which could be an extremely useful extra handle to avoid background events. The need for a satisfactory topology reconstruction has led the NEXT Collaboration to implement the Maximum Likelihood Expectation Maximization method (ML-EM) in the data processing scheme. ML-EM is a generic iterative algorithm for many kinds of inverse problems. Although this method is well known in medical imaging and has been used widely in Positron Emission Tomography, it has never been applied to a time projection chamber. First results and studies of the performance of the method will be presented in this poster.

  4. EM susceptibility studies and measurements on electro explosive devices

    NASA Astrophysics Data System (ADS)

    Deb, G. K.; Mukherjee, M.

    Electroexplosive devices (EEDs) are susceptible to stray electromagnetic (EM) fields near high-power communications and radar transmitters. Experiments have been carried out to measure the exact susceptibility of EED resistive squibs in pulsed and continuous EM environments, respectively. The susceptibility test procedure consisted of individual measurements of direct current sensitivity (mA); impulse sensitivity; RF impedance measurements; and safety margin calculations. A stray energy monitor was used to evaluate the safe performance of a hybrid weapons system. It is found that the RF sensitivity of the squib was influenced by the transmission characteristics of the transmission line connected to it. RF absorption peaks were observed above the EED sensitivity threshold of 120 MHz. Methods of EMI control are discussed, including: low-pass pin filters; lossy line filters for all dc power line interconnections; and twisting and shielding of the wires.

  5. Environmental Restoration and Waste Management (EM) program: An introduction

    SciTech Connect

    Not Available

    1990-12-01

    This booklet introduces the reader to the mission and functions of a major new unit within the US Department of Energy (DOE): the Office of Environmental Restoration and Waste Management (EM). The Secretary of Energy established EM in November 1989, implementing a central purpose of DOE's first annual Environmental Restoration and Waste Management Five-Year Plan, which had appeared three months earlier. The contents of this booklet, and their arrangement, reflect the annual update of the Five-Year Plan. The Five-Year Plan supports DOE's strategy for meeting its 30-year compliance and cleanup goal. This strategy involves: focusing DOE's activities on eliminating or reducing known or recognized potential risks to worker and public health and the environment, containing or isolating, removing, or detoxifying onsite and offsite contamination, and developing technology to achieve DOE's environmental goals.

  6. Superconducting Electromagnetic Suspension (EMS) system for Grumman Maglev concept

    NASA Technical Reports Server (NTRS)

    Kalsi, Swarn S.

    1994-01-01

    The Grumman developed Electromagnetic Suspension (EMS) Maglev system has the following key characteristics: a large operating airgap--40 mm; levitation at all speeds; both high speed and low speed applications; no deleterious effects on SC coils at low vehicle speeds; low magnetic field at the SC coil--less than 0.35 T; no need to use non-magnetic/non-metallic rebar in the guideway structure; low magnetic field in passenger cabin--approximately 1 G; low forces on the SC coil; employs state-of-the-art NbTi wire; no need for an active magnet quench protection system; and lower weight than a magnet system with copper coils. The EMS Maglev described in this paper does not require development of any new technologies. The system could be built with the existing SC magnet technology.

  7. A constrained EM algorithm for principal component analysis.

    PubMed

    Ahn, Jong-Hoon; Oh, Jong-Hoon

    2003-01-01

    We propose a constrained EM algorithm for principal component analysis (PCA) using a coupled probability model derived from single-standard factor analysis models with isotropic noise structure. The single probabilistic PCA, especially for the case where there is no noise, can find only a vector set that is a linear superposition of principal components and requires postprocessing, such as diagonalization of symmetric matrices. By contrast, the proposed algorithm finds the actual principal components, which are sorted in descending order of eigenvalue size and require no additional calculation or postprocessing. The method is easily applied to kernel PCA. It is also shown that the new EM algorithm is derived from a generalized least-squares formulation.

  8. Hybrid polymer composite membrane for an electromagnetic (EM) valveless micropump

    NASA Astrophysics Data System (ADS)

    Said, Muzalifah Mohd; Yunas, Jumril; Bais, Badariah; Azlan Hamzah, Azrul; Yeop Majlis, Burhanuddin

    2017-07-01

    In this paper, we report on a hybrid membrane used as an actuator in an electromagnetically driven valveless micropump developed using MEMS processes. The membrane structure consists of the combination of a magnetic polymer composite membrane and an attached bulk permanent magnet which is expected to have a compact structure and a strong magnetic force with maintained membrane flexibility. A soft polymeric material made of polydimethylsiloxane (PDMS) is initially mixed with neodymium magnetic particles (NdFeB) to form a magnetic polymer composite membrane. The membrane is then bonded with the PDMS based microfluidic part, developed using soft lithography process. The developed micropump was tested in terms of the actuator membrane deflection capability and the fluidic flow of the injected fluid sample through the microfluidic channel. The experimental results show that the magnetic composite actuator membrane with an attached bulk permanent magnet is capable of producing a maximum membrane deflection of up to 106 µm. The functionality test of the electromagnetic (EM) actuator for fluid pumping purposes was done by supplying an AC voltage with various amplitudes, signal waves and frequencies. A wide range of sample injection rates from a few µl min-1 to tens of nl min-1 was achieved with a maximum flow rate of 6.6 µl min-1. The injection flow rate of the EM micropump can be controlled by adjusting the voltage amplitude and frequency supplied to the EM coil, to control the membrane deflection in the pump chamber. The designed valveless EM micropump has a very high potential to enhance the drug delivery system capability in biomedical applications.

  9. Love 'em or they'll leave: motivating volunteers.

    PubMed

    McDowell, D

    1999-11-01

    Running a successful volunteer-based service does not begin and end with the recruitment of volunteers. You need to first consider what is in it for the prospective volunteer, define why you want volunteers and then decide exactly what you want those volunteers to do. Then you recruit them, face-to-face, ensuring that every prospect is offered something specific to do and is welcomed into your EMS family.

  10. EMS mutagenesis in the pea aphid Acyrthosiphon pisum.

    PubMed

    Tagu, Denis; Le Trionnaire, Gaël; Tanguy, Sylvie; Gauthier, Jean-Pierre; Huynh, Jean-René

    2014-04-16

    In aphids, clonal individuals can show distinct morphologic traits in response to environmental cues. Such phenotypic plasticity cannot be studied with classical genetic model organisms such as Caenorhabditis elegans or Drosophila melanogaster. The genetic basis of this biological process remain unknown, as mutations affecting this process are not available in aphids. Here, we describe a protocol to treat third-stage larvae with an alkylating mutagen, ethyl methanesulfonate (EMS), to generate random mutations within the Acyrthosiphon pisum genome. We found that even low concentrations of EMS were toxic for two genotypes of A. pisum. Mutagenesis efficiency was nevertheless assessed by estimating the occurrence of mutational events on the X chromosome. Indeed, any lethal mutation on the X-chromosome would kill males that are haploid on the X so that we used the proportion of males as an estimation of mutagenesis efficacy. We could assess a putative mutation rate of 0.4 per X-chromosome at 10 mM of EMS. We then applied this protocol to perform a small-scale mutagenesis on parthenogenetic individuals, which were screened for defects in their ability to produce sexual individuals in response to photoperiod shortening. We found one mutant line showing a reproducible altered photoperiodic response with a reduced production of males and the appearance of aberrant winged males (wing atrophy, alteration of legs morphology). This mutation appeared to be stable because it could be transmitted over several generations of parthenogenetic individuals. To our knowledge, this study represents the first example of an EMS-generated aphid mutant.

  11. EMS Mutagenesis in the Pea Aphid Acyrthosiphon pisum

    PubMed Central

    Tagu, Denis; Le Trionnaire, Gaël; Tanguy, Sylvie; Gauthier, Jean-Pierre; Huynh, Jean-René

    2014-01-01

    In aphids, clonal individuals can show distinct morphologic traits in response to environmental cues. Such phenotypic plasticity cannot be studied with classical genetic model organisms such as Caenorhabditis elegans or Drosophila melanogaster. The genetic basis of this biological process remain unknown, as mutations affecting this process are not available in aphids. Here, we describe a protocol to treat third-stage larvae with an alkylating mutagen, ethyl methanesulfonate (EMS), to generate random mutations within the Acyrthosiphon pisum genome. We found that even low concentrations of EMS were toxic for two genotypes of A. pisum. Mutagenesis efficiency was nevertheless assessed by estimating the occurrence of mutational events on the X chromosome. Indeed, any lethal mutation on the X-chromosome would kill males that are haploid on the X so that we used the proportion of males as an estimation of mutagenesis efficacy. We could assess a putative mutation rate of 0.4 per X-chromosome at 10 mM of EMS. We then applied this protocol to perform a small-scale mutagenesis on parthenogenetic individuals, which were screened for defects in their ability to produce sexual individuals in response to photoperiod shortening. We found one mutant line showing a reproducible altered photoperiodic response with a reduced production of males and the appearance of aberrant winged males (wing atrophy, alteration of legs morphology). This mutation appeared to be stable because it could be transmitted over several generations of parthenogenetic individuals. To our knowledge, this study represents the first example of an EMS-generated aphid mutant. PMID:24531730

  12. Range Condition and ML-EM Checkerboard Artifacts

    PubMed Central

    You, Jiangsheng; Wang, Jing; Liang, Zhengrong

    2007-01-01

    The expectation maximization (EM) algorithm for the maximum likelihood (ML) image reconstruction criterion generates severe checkerboard artifacts in the presence of noise. A classical remedy is to impose an a priori constraint for a penalized ML or maximum a posteriori probability solution. The penalty reduces the checkerboard artifacts and also introduces uncertainty because a priori information is usually unknown in clinic. Recent theoretical investigation reveals that the noise can be divided into two components: one is called null-space noise and the other is range-space noise. The null-space noise can be numerically estimated using filtered backprojection (FBP) algorithm. By the FBP algorithm, the null-space noise annihilates in the reconstruction while the range-space noise propagates into the reconstructed image. The aim of this work is to investigate the relation between the null-space noise and the checkerboard artifacts in the ML-EM reconstruction from noisy projection data. Our study suggests that removing the null-space noise from the projection data could improve the signal-to-noise ratio of the projection data and, therefore, reduce the checkerboard artifacts in the ML-EM reconstructed images. This study reveals an in-depth understanding of the different noise propagations in analytical and iterative image reconstructions, which may be useful to single photon emission computed tomography, where the noise has been a major factor for image degradation. The reduction of the ML-EM checkerboard artifacts by removing the null-space noise avoids the uncertainty of using a priori penalty. PMID:18449363

  13. Generalized single-particle cryo-EM--a historical perspective.

    PubMed

    Frank, Joachim

    2016-02-01

    This is a brief account of the earlier history of single-particle cryo-EM of biological molecules lacking internal symmetry, which goes back to the mid-seventies. The emphasis of this review is on the mathematical concepts and computational approaches. It is written as the field experiences a turning point in the wake of the introduction of digital cameras capable of single electron counting, and near-atomic resolution can be reached even for smaller molecules.

  14. Principles of cryo-EM single-particle image processing

    PubMed Central

    Sigworth, Fred J.

    2016-01-01

    Single-particle reconstruction is the process by which 3D density maps are obtained from a set of low-dose cryo-EM images of individual macromolecules. This review considers the fundamental principles of this process and the steps in the overall workflow for single-particle image processing. Also considered are the limits that image signal-to-noise ratio places on resolution and the distinguishing of heterogeneous particle populations. PMID:26705325

  15. Night Vision Goggles in Emergency Medical Service (EMS) Helicopters

    DTIC Science & Technology

    1994-07-01

    participated in a flight test program to assess the use of NVG’s in EMS operations. Information produced by other government agencies with extensive NVG...recommendations of this document. information produced by other government agencies, with extensive experience with NVGs, was reviewed for use in this...as possible without touching eyelashes or spectacles (see figure 35). 5. Evaluate the picture. The NVG should be correctly aligned. There should be no

  16. Color a bright energy picture with EMS controls

    SciTech Connect

    Not Available

    1985-09-01

    After 80 years in the crayon-manufacturing business, Binney and Smith found that more than 50% of their staggering annual utility costs were being generated by non-production loads. To curtail waste, they installed an expandable EMS which controls energy in the company's two separate, multi-building facilities from one central location. The system selected was an AI2100/MAX System manufactured by American Auto-Matrix, Export, PA.

  17. Integrated GW-EM Follow-up Analysis

    NASA Astrophysics Data System (ADS)

    Ackley, Kendall; Eikenberry, Stephen; Klimenko, Sergey; LSC Collaboration

    2015-04-01

    Advanced Gravitational-Wave (GW) detectors such as Advanced LIGO and Advanced Virgo are expected to become operational for observation runs in 2015, with an expected ultimate improvement in sensitivity over previous configurations by a factor of 10 by 2019. There are many potential electromagnetic (EM) counterparts to GWs including short and long gamma-ray bursts (GRBs) and kilonovae. While SGRBs and LGRBs predominantly emit in the X-ray, and the recently-observed kilonova primarily in the infrared, all three sources are expected to have detectable traces in the optical band, albeit requiring very sensitive optical telescopes. In order to aid in the optimization of GW trigger follow-up procedures, we perform an end-to-end analysis feasibility study using synthesized Advanced detector data simulating a GW detection with a theoretical EM counterpart injected into archival optical images. We use images from Robotic Optical Transient Search Experiment (ROTSE) and Palomar Transient Factory (PTF), and inject candidate events following observed lightcurves of SGRBs, LGRBs, and kilonovae. The use of Zernike PSF decomposition on candidate objects offers a fast way to identify point sources, speeding up the automated identification of transient sources in the images. We present our method of transient recovery and the latest results of our feasibility study of a joint GW-EM observation.

  18. Modeling to Optimize Hospital Evacuation Planning in EMS Systems.

    PubMed

    Bish, Douglas R; Tarhini, Hussein; Amara, Roel; Zoraster, Richard; Bosson, Nichole; Gausche-Hill, Marianne

    2017-01-01

    To develop optimal hospital evacuation plans within a large urban EMS system using a novel evacuation planning model and a realistic hospital evacuation scenario, and to illustrate the ways in which a decision support model may be useful in evacuation planning. An optimization model was used to produce detailed evacuation plans given the number and type of patients in the evacuating hospital, resource levels (teams to move patients, vehicles, and beds at other hospitals), and evacuation rules. Optimal evacuation plans under various resource levels and rules were developed and high-level metrics were calculated, including evacuation duration and the utilization of resources. Using this model we were able to determine the limiting resources and demonstrate how strategically augmenting the resource levels can improve the performance of the evacuation plan. The model allowed the planner to test various evacuation conditions and resource levels to demonstrate the effect on performance of the evacuation plan. We present a hospital evacuation planning analysis for a hospital in a large urban EMS system using an optimization model. This model can be used by EMS administrators and medical directors to guide planning decisions and provide a better understanding of various resource allocation decisions and rules that govern a hospital evacuation.

  19. Essential ethics for EMS: cardinal virtues and core principles.

    PubMed

    Larkin, Gregory Luke; Fowler, Raymond Logan

    2002-11-01

    Dutiful attention to virtue, teamwork, beneficence, justice, and respect for patient autonomy provides a coherent approach to addressing many ethical dilemmas in the out-of-hospital setting. Most of the great risks of EMS--abandonment, competence, and safe-driving skills--lie at the ethike or character of those who ply the prehospital art. Proactively fostering the personal and professional virtue of team members may be a kind of moral vaccination against the ethical pitfalls inherent in emergency medical service provision. Future training, education, disaster preparedness drills, and related exercises must include opportunities for character and team building before optimal performance and accountability can be assured. In the steady, almost glacial, maturation of the specialty of EMS medicine, truly the character of those who serve in the "line of fire" of evaluation, management, and transport in the out-of-hospital arena must be girded with more than the armor and shields of technology. Since September 11, 2001, it has become increasingly clear that EMS workers must strengthen their ability to bear the "slings and arrows of outrageous fortune," armed with swords of discipline, virtue, and character to provide the breadth of care that only a well orchestrated team can deliver. Ultimately, humans perform best when they share themselves unselfconsciously, surrendering to an enterprise and cause far greater than themselves. Our citizens, patients, and heroic colleagues deserve no less.

  20. Marine EM: The Past, The Present, and The Future

    NASA Astrophysics Data System (ADS)

    Constable, S.

    2016-12-01

    The high cost of deepwater exploration motivated the development of commercial marine magnetotelluric (MT) exploration in 1995, but it wasn't until marine controlled-source electromagnetic (CSEM) methods burst upon the industry scene with the formation of three new contractors in 2002 that things got really exciting. Now the bubble has burst and the excitement has diminished, but marine EM remains an important tool for offshore exploration. Early mistakes were made as a result of poor instrumentation and a lack of good interpretation tools - unlike seismics, EM relies heavily on inversion to produce useful results - but both equipment and inversion codes have improved significantly. Still, there are mistakes that can be made. Rock anisotropy and seawater conductivity have to be handled appropriately. A strong galvanic response means that there is a resistivity/thickness ambiguity when imaging reservoirs, but the inductive nature of the data means that multi-frequency inversions are very much better than using single frequencies. Resolution will never be as good as for seismic methods, but is much better than for potential field methods and conductivity may often be a more diagnostic property than acoustic impedance. EM images resistivity, not hydrocarbon content, and false positives occasionally occur, but false negatives are rare. That is, without a CSEM signature there is little chance of discovering economical hydrocarbons. This should bode well for the future of the method.

  1. Forward Genetics by Sequencing EMS Variation-Induced Inbred Lines

    PubMed Central

    Addo-Quaye, Charles; Buescher, Elizabeth; Best, Norman; Chaikam, Vijay; Baxter, Ivan; Dilkes, Brian P.

    2016-01-01

    In order to leverage novel sequencing techniques for cloning genes in eukaryotic organisms with complex genomes, the false positive rate of variant discovery must be controlled for by experimental design and informatics. We sequenced five lines from three pedigrees of ethyl methanesulfonate (EMS)-mutagenized Sorghum bicolor, including a pedigree segregating a recessive dwarf mutant. Comparing the sequences of the lines, we were able to identify and eliminate error-prone positions. One genomic region contained EMS mutant alleles in dwarfs that were homozygous reference sequences in wild-type siblings and heterozygous in segregating families. This region contained a single nonsynonymous change that cosegregated with dwarfism in a validation population and caused a premature stop codon in the Sorghum ortholog encoding the gibberellic acid (GA) biosynthetic enzyme ent-kaurene oxidase. Application of exogenous GA rescued the mutant phenotype. Our method for mapping did not require outcrossing and introduced no segregation variance. This enables work when line crossing is complicated by life history, permitting gene discovery outside of genetic models. This inverts the historical approach of first using recombination to define a locus and then sequencing genes. Our formally identical approach first sequences all the genes and then seeks cosegregation with the trait. Mutagenized lines lacking obvious phenotypic alterations are available for an extension of this approach: mapping with a known marker set in a line that is phenotypically identical to starting material for EMS mutant generation. PMID:28040779

  2. A study on characteristics of EM radiation from stripline structure

    NASA Astrophysics Data System (ADS)

    Kayano, Yoshiki; Inoue, Hiroshi

    2011-10-01

    In recent years, effective methods for predicting and suppressing electromagnetic interference over a broad band are required. In this paper, we focus on the prediction of electromagnetic (EM) radiation from a stripline structure with a ground thin wire by an equivalent circuit model. First, frequency responses of common-mode (CM) current on the printed circuit board and EM radiation are studied with finite difference time domain modeling. Secondly, an equivalent circuit model for predicting CM current is proposed. The equivalent circuit model for prediction is based on the concepts of CM antenna impedance, distributed constant circuit, and electric coupling between the power plane and the thin ground wire. Good agreement between the predicted and full-wave analysis results indicates the validity of the proposed equivalent circuit model. The frequency response of EM radiation from the stripline structure can be identified using our proposed model. In addition, the equivalent circuit model provides enough flexibility for different geometric parameters and can be used to develop physical insights and design guidelines.

  3. Improving EM&V for Energy Efficiency Programs (Fact Sheet)

    SciTech Connect

    Not Available

    2012-07-01

    This fact sheet describes the objectives of the U.S. Department of Energy Uniform Methods Project to bring consistency to energy savings calculations in U.S. energy efficiency programs. The U.S. Department of Energy (DOE) is developing a framework and a set of protocols for determining gross energy savings from energy efficiency measures and programs. The protocols represent a refinement of the body of knowledge supporting energy efficiency evaluation, measurement, and verification (EM&V) activities. They have been written by technical experts within the field and reviewed by industry experts. Current EM&V practice allows for multiple methods for calculating energy savings. These methods were developed to meet the needs of energy efficiency program administrators and regulators. Although they served their original objectives well, they have resulted in inconsistent and incomparable savings results - even for identical measures. The goal of the Uniform Methods Project is to strengthen the credibility of energy savings determinations by improving EM&V, increasing the consistency and transparency of how energy savings are determined.

  4. Debris Avalanche Formation at Kick'em Jenny Submarine Volcano

    NASA Astrophysics Data System (ADS)

    Sigurdsson, H.; Carey, S. N.; Wilson, D.

    2005-12-01

    Kick'em Jenny submarine volcano near Grenada is the most active volcanic center in the Lesser Antilles arc. Multibeam surveys of the volcano by NOAA in 2002 revealed an arcuate fault scarp east of the active cone, suggesting flank collapse. More extensive NOAA surveys in 2003 demonstrated the presence of an associated debris avalanche deposit, judging from their surface morphologic expression on the sea floor, extending at least 15 km and possibly as much as 30 km from the volcano, into the Grenada Basin to the west. Seismic air-gun profiles of the region show that these are lobate deposits, that range in thickness from tens to hundreds of meters. The debris avalanche deposit is contained within two marginal levees, that extend symmetrically from the volcano to the west. A conservative estimate of the volume of the smaller debris avalanche deposit is about 10 km3. Age dating of the deposits and the flank failure events is in progress, by analysis of gravity cores collected during the 2003 survey. Reconstruction of the pre-collapse volcanic edifice suggests that the ancestral Kick'em Jenny volcano might have been at or above sea level. Kick'em Jenny is dominantly supplied by basalt to basaltic andesite magmas, that are extruded now as submarine pillow lavas and domes or ejected as tephra in relatively minor phreatomagmatic explosions. Geochemical evolution of this volcano has not, however, reached the stage of generation of volatile-rich silicic magmas that might form highly explosive eruptions.

  5. The US DOE-EM International Program - 13004

    SciTech Connect

    Elmetti, Rosa R.; Han, Ana M.; Williams, Alice C.

    2013-07-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eight international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into FY 2013 and beyond. (authors)

  6. Bayesian Modeling of Biomolecular Assemblies with Cryo-EM Maps

    PubMed Central

    Habeck, Michael

    2017-01-01

    A growing array of experimental techniques allows us to characterize the three-dimensional structure of large biological assemblies at increasingly higher resolution. In addition to X-ray crystallography and nuclear magnetic resonance in solution, new structure determination methods such cryo-electron microscopy (cryo-EM), crosslinking/mass spectrometry and solid-state NMR have emerged. Often it is not sufficient to use a single experimental method, but complementary data need to be collected by using multiple techniques. The integration of all datasets can only be achieved by computational means. This article describes Inferential structure determination, a Bayesian approach to integrative modeling of biomolecular complexes with hybrid structural data. I will introduce probabilistic models for cryo-EM maps and outline Markov chain Monte Carlo algorithms for sampling model structures from the posterior distribution. I will focus on rigid and flexible modeling with cryo-EM data and discuss some of the computational challenges of Bayesian inference in the context of biomolecular modeling. PMID:28382301

  7. Retrospectively exploring the importance of items in the decision to leave the emergency medical services (EMS) profession and their relationships to life satisfaction after leaving EMS and likelihood of returning to EMS.

    PubMed

    Blau, Gary; Chapman, Susan

    2011-01-01

    An exit survey was returned by a sample of 127 respondents in fully compensated positions who left the EMS profession, most within 12 months prior to filling out the exit survey. A very high percentage continued to work after leaving EMS. Respondents were asked to rate the importance of each of 17 items in affecting their decision to leave EMS. A higher than anticipated response to a "not applicable" response choice affected the usability of 8 of these items. Nine of the 17 items had at least 65 useable responses and were used for further analysis. Within these 9, stress/burnout and lack of job challenges had the highest importance in affecting the decision to leave EMS, while desire for better pay and benefits had the lowest importance. Desire for career change was positively related to life satisfaction after leaving EMS and negatively related to likelihood of returning to EMS. Stress/burnout was positively related to life satisfaction after leaving EMS. Study limitations and future research issues are briefly discussed.

  8. EMS-STARS: Emergency Medical Services "Superuser" Transport Associations: An Adult Retrospective Study.

    PubMed

    Hall, M Kennedy; Raven, Maria C; Hall, Jane; Yeh, Clement; Allen, Elaine; Rodriguez, Robert M; Tangherlini, Niels L; Sporer, Karl A; Brown, John F

    2015-01-01

    Abstract Objective. Emergency medical services (EMS) "superusers" -those who use EMS services at extremely high rates -have not been well characterized. Recent interest in the small group of individuals who account for a disproportionate share of health-care expenditures has led to research on frequent users of emergency departments and other health services, but little research has been done regarding those who use EMS services. To inform policy and intervention implementation, we undertook a descriptive analysis of EMS superusers in a large urban community. In this paper we compare EMS superusers to low, moderate, and high users to characterize factors contributing to EMS use. We also estimate the financial impact of EMS superusers. Methods. We conducted a retrospective cross-sectional study based on 1 year of data from an urban EMS system. Data for all EMS encounters with patients age ≥18 years were extracted from electronic records generated on scene by paramedics. We identified demographic and clinical variables associated with levels of EMS use. EMS users were characterized by the annual number of EMS encounters: low (1), moderate (2-4), high (5-14), and superusers (≥15). In addition, we performed a financial analysis using San Francisco Fire Department (SFFD) 2009 charge and reimbursement data. Results. A total of 31,462 adults generated 43,559 EMS ambulance encounters, which resulted in 39,107 transports (a 90% transport rate). Encounters for general medical reasons were common among moderate and high users and less frequent among superusers and low users, while alcohol use was exponentially correlated with encounter frequency. Superusers were significantly younger than moderate EMS users, and more likely to be male. The superuser group created a significantly higher financial burden/person than any other group, comprising 0.3% of the study population, but over 6% of annual EMS charges and reimbursements. Conclusions. In this retrospective study, adult

  9. Investigation of Electromagnetic Signatures of a FPGA Using an APREL EM-ISIGHT System

    DTIC Science & Technology

    2015-12-01

    INVESTIGATION OF ELECTROMAGNETIC SIGNATURES OF A FPGA USING AN APREL EM-ISIGHT SYSTEM THESIS...States. AFIT-ENV-MS-15-D-035 INVESTIGATION OF ELECTROMAGNETIC SIGNATURES OF A FPGA USING AN APREL EM-ISIGHT SYSTEM THESIS Presented...ENV-MS-15-D-035 INVESTIGATION OF ELECTROMAGNETIC SIGNATURES OF A FPGA USING AN APREL EM-ISIGHT SYSTEM Karynn A. Sutherlin, Civilian, DAF

  10. An EM System With Dramatic Multi-Axis Transmitter and Tensor Gradiometer Receiver

    DTIC Science & Technology

    2011-06-01

    FINAL REPORT An EM System With Dramatic Multi-Axis Transmitter and Tensor Gradiometer Receiver SERDP Project MR-1534 JUNE 2011 David C...Technical 2006-20 10 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER An EM System with Dynamic Multi-Axis transmitter and Tensor Gradiometer W912HQ-06-C-0050...ANSI Std. Z39. 18 EM Tensor Gradiometer SERDP MM-1532 i Contents Contents

  11. Measuring Turbulence Mixing in Indonesian Seas using Microstructure EM APEX Floats

    DTIC Science & Technology

    2015-09-30

    Research and Technology). Our engineers have updated the EM-APEX float software and prepared test floats . Monsoon wind forcing, and thereby upper ocean...Microstructure EM-APEX Floats Ren-Chieh Lien Applied Physics Laboratory University of Washington 1013 NE 40th Street Seattle, Washington 98105...modulation of sea surface temperature and air–sea fluxes. APPROACH Two microstructure EM-APEX floats will be deployed in Indonesian Seas. The

  12. EM absorption reduction in wireless mobile antenna using printed paper-based metamaterial

    NASA Astrophysics Data System (ADS)

    Alam, Touhidul; Islam, Mohammad Tariqul; Kibria, Salehin; Cho, Mengu; Faruque, Mohammad Rashed Iqbal

    2017-01-01

    This paper presents a printed negative index metamaterial for electromagnetic (EM) absorption reduction in portable wireless antenna. The perceptible novelty exhibited in this paper is that EM absorption reduction toward the human head with paper-based metamaterial attachment. This research has been performed using human head phantom integrated in the commercially available CST Microwave Studio software package. The EM absorption has been reduced by 13.2 and 6% at 900 and 1800 MHz, respectively.

  13. An EM-IMM based abrupt change detector for landmine detection

    NASA Astrophysics Data System (ADS)

    Venkatasubramanian, Vijayaraghavan; Leung, Henry

    2006-05-01

    In this paper, we propose an expectation maximization (EM) trained interacting multiple model (IMM) abrupt change detector for land mine detection applications. The proposed EM algorithm learns the parameters of the different models in real time without requiring a priori information on either the number of models or the model parameters. Using the real ground penetrating radar (GPR) data, the learning performance of the EM-IMM technique is analyzed and commented upon. Numerical receiver operating characteristics (ROC) analysis and detected images indicate that the proposed EM-IMM based abrupt change detector has a better detection and imaging performance than the conventional Kalman filter for land mine detection applications.

  14. USMC’s Environmental Management Portal for EMS Implementation Service-wide Rollout and Future Plans

    DTIC Science & Technology

    2010-06-16

    at MCB Camp Lejeune in 2004 – EMS implementation efforts resulted in the need for a web -based system for: communicating with EMS stakeholders Up AND...Si:e m Edit Page EM flortal HOMC Fnwnnm1~nt. Welcome to the E~l : xecJtive Order (:O) 13148, m~lemented at all aplicable Le9dership h Ewironmnt91...sharing environmental information • managing EMS-related data and documentation – Additional linkage to other USMC web -based applications – Migration to

  15. Multi-frequency electromagnetic sounding tool EMS. Archaeological discoveries. Case stories.

    NASA Astrophysics Data System (ADS)

    Abu Zeid, N.; Balkov, E.; Chemyakina, M.; Manstein, A.; Manstein, Y.; Morelli, G.; Santarato, G.

    2003-04-01

    EMS is the new patented tool for shallow-depth (up to 7 m) induction frequency sounding. The tool is developed in Institute of Geophysics, Siberian Branch of Russian Academy, Novosibirsk, RUSSIA. Few years of application of EMS prototypes in archaeological prospection gave us the well described picture of possibilities and limitations of EM sounding for archaeological purpose. We would like to present several archaeological case stories including paleolitic, bronze and iron ages, antique and medieval targets discovery. The cases include complex geophysical works using GPR, Vertical DC sounding and magnetometry together with EM sounding. Archaeological proofs of geophysical prospection will be presented. The last September in Italy we have done the comparative work at few Italian archaeological sites. The second EMS prototype has been compared with commercially available tools for EM prospection such as EM mappers, georadars and DC electrical resistivity tomography. In the comparison EMS feature good noise immunity, high sensibility and resolution. In some cases only EMS data shows the buried targets and it was proved immediately by excavation. The researches were done with financial support of RFBR grant # 00-06-80421

  16. Modeling of MHD edge containment in strip casting with ELEKTRA and CaPS-EM codes

    SciTech Connect

    Chang, F. C.

    2000-01-12

    This paper presents modeling studies of magnetohydrodynamics analysis in twin-roll casting. Argonne National Laboratory (ANL) and ISPAT Inland Inc. (Inland), formerly Inland Steel Co., have worked together to develop a three-dimensional (3-D) computer model that can predict eddy currents, fluid flows, and liquid metal containment of an electromagnetic (EM) edge containment device. The model was verified by comparing predictions with experimental results of liquid metal containment and fluid flow in EM edge dams (EMDs) that were designed at Inland for twin-roll casting. This mathematical model can significantly shorten casting research on the use of EM fields for liquid metal containment and control. The model can optimize the EMD design so it is suitable for application, and minimize expensive time-consuming full-scale testing. Numerical simulation was performed by coupling a 3-D finite-element EM code (ELEKTRA) and a 3-D finite-difference fluids code (CaPS-EM) to solve heat transfer, fluid flow, and turbulence transport in a casting process that involves EM fields. ELEKTRA can predict the eddy-current distribution and the EM forces in complex geometries. CaPS-EM can model fluid flows with free surfaces. The computed 3-D magnetic fields and induced eddy currents in ELEKTRA are used as input to temperature- and flow-field computations in CaPS-EM. Results of the numerical simulation compared well with measurements obtained from both static and dynamic tests.

  17. Volta phase plate cryo-EM of the small protein complex Prx3

    NASA Astrophysics Data System (ADS)

    Khoshouei, Maryam; Radjainia, Mazdak; Phillips, Amy J.; Gerrard, Juliet A.; Mitra, Alok K.; Plitzko, Jürgen M.; Baumeister, Wolfgang; Danev, Radostin

    2016-01-01

    Cryo-EM of large, macromolecular assemblies has seen a significant increase in the numbers of high-resolution structures since the arrival of direct electron detectors. However, sub-nanometre resolution cryo-EM structures are rare compared with crystal structure depositions, particularly for relatively small particles (<400 kDa). Here we demonstrate the benefits of Volta phase plates for single-particle analysis by time-efficient cryo-EM structure determination of 257 kDa human peroxiredoxin-3 dodecamers at 4.4 Å resolution. The Volta phase plate improves the applicability of cryo-EM for small molecules and accelerates structure determination.

  18. Emergency medical services and "psych calls": Examining the work of urban EMS providers.

    PubMed

    Prener, Christopher; Lincoln, Alisa K

    2015-11-01

    Emergency medical technicians and paramedics form the backbone of the United States' Emergency Medical Service (EMS) system. Despite the frequent involvement of EMS with people with mental health and substance abuse problems, the nature and content of this work, as well as how EMS providers think about this work, have not been fully explored. Using data obtained through observations and interviews with providers at an urban American EMS agency, this paper provides an analysis of the ways in which EMS providers interact with people with mental illness and substance abuse problems, as well as providers' experiences with the mental health care system. Results demonstrate that EMS providers share common beliefs and frustrations about "psych calls" and the types of calls that involve people with behavioral health problems. In addition, providers described their understandings of the ways in which people with mental health and substance use problems "abuse the system" and the consequences of this abuse. Finally, EMS providers discuss the system-level factors that impact their work and specific barriers and challenges to care. These results suggest that additional work is needed to expand our understanding of the role of EMS providers in the care of people with behavioral health problems and that mental health practitioners and policy makers should include consideration of the important role of EMS and prehospital care in providing community-based supports for people with behavioral health needs. (PsycINFO Database Record

  19. The HOME Team: Evaluating the Effect of an EMS-based Outreach Team to Decrease the Frequency of 911 Use Among High Utilizers of EMS.

    PubMed

    Tangherlini, Niels; Villar, Julian; Brown, John; Rodriguez, Robert M; Yeh, Clement; Friedman, Benjamin T; Wada, Paul

    2016-12-01

    The San Francisco Fire Department's (SFFD; San Francisco, California USA) Homeless Outreach and Medical Emergency (HOME) Team is the United States' first Emergency Medical Services (EMS)-based outreach effort using a specially trained paramedic to redirect frequent users of EMS to other types of services. The effectiveness of this program at reducing repeat use of emergency services during the first seven months of the team's existence was examined. A retrospective analysis of EMS use frequency and demographic characteristics of frequent users was conducted. Clients that used emergency services at least four times per month from March 2004 through May 2005 were contacted for intervention. Patterns for each frequent user before and after intervention were analyzed. Changes in EMS use during the 15-month study interval was the primary outcome measurement. A total of 59 clients were included. The target population had a median age of 55.1 years and was 68% male. Additionally, 38.0% of the target population was homeless, 43.4% had no primary care, 88.9% had a substance abuse disorder at time of contact, and 83.0% had a history of psychiatric disorder. The HOME Team undertook 320 distinct contacts with 65 frequent users during the study period. The average EMS use prior to HOME Team contact was 18.72 responses per month (SD=19.40), and after the first contact with the HOME Team, use dropped to 8.61 (SD=10.84), P<.001. Frequent users of EMS suffer from disproportionate comorbidities, particularly substance abuse and psychiatric disorders. This population responds well to the intervention of a specially trained paramedic as measured by EMS usage. Tangherlini N , Villar J , Brown J , Rodriguez RM , Yeh C , Friedman BT , Wada P . The HOME Team: evaluating the effect of an EMS-based outreach team to decrease the frequency of 911 use among high utilizers of EMS. Prehosp Disaster Med. 2016;31(6):603-607.

  20. Emergency Medical Services Utilization in EMS Priority Conditions in Beirut, Lebanon.

    PubMed

    El Sayed, Mazen; Tamim, Hani; Chehadeh, Ahel Al-Hajj; Kazzi, Amin A

    2016-12-01

    Early activation and use of Emergency Medical Services (EMS) are associated with improved patient outcomes in EMS priority conditions in developed EMS systems. This study describes patterns of EMS use and identifies predictors of EMS utilization in EMS priority conditions in Lebanon METHODS: This was a cross-sectional study of a random sample of adult patients presenting to the emergency department (ED) of a tertiary care center in Beirut with the following EMS priority conditions: chest pain, major trauma, respiratory distress, cardiac arrest, respiratory arrest, and airway obstruction. Patient/proxy survey (20 questions) and chart review were completed. The responses to survey questions were "disagree," "neutral," or "agree" and were scored as one, two, or three with three corresponding to higher likelihood of EMS use. A total scale score ranging from 20 to 60 was created and transformed from 0% to 100%. Data were analyzed based on mode of presentation (EMS vs other). Among the 481 patients enrolled, only 112 (23.3%) used EMS. Mean age for study population was 63.7 years (SD=18.8 years) with 56.5% males. Mean clinical severity score (Emergency Severity Index [ESI]) was 2.5 (SD=0.7) and mean pain score was 3.1 (SD=3.5) at ED presentation. Over one-half (58.8%) needed admission to hospital with 21.8% to an intensive care unit care level and with a mortality rate of 7.3%. Significant associations were found between EMS use and the following variables: severity of illness, degree of pain, familiarity with EMS activation, previous EMS use, perceived EMS benefit, availability of EMS services, trust in EMS response times and treatment, advice from family, and unavailability of immediate private mode of transport (P≤.05). Functional screening, or requiring full assistance (OR=4.77; 95% CI, 1.85-12.29); acute symptoms onset ≤ one hour (OR=2.14; 95% CI, 1.08-4.26); and higher scale scores (OR=2.99; 95% CI, 2.20-4.07) were significant predictors of EMS use. Patients

  1. EM-21 Retrieval Knowledge Center: Waste Retrieval Challenges

    SciTech Connect

    Fellinger, Andrew P.; Rinker, Michael W.; Berglin, Eric J.; Minichan, Richard L.; Poirier, Micheal R.; Gauglitz, Phillip A.; Martin, Bruce A.; Hatchell, Brian K.; Saldivar, Eloy; Mullen, O Dennis; Chapman, Noel F.; Wells, Beric E.; Gibbons, Peter W.

    2009-04-10

    EM-21 is the Waste Processing Division of the Office of Engineering and Technology, within the U.S. Department of Energy’s (DOE) Office of Environmental Management (EM). In August of 2008, EM-21 began an initiative to develop a Retrieval Knowledge Center (RKC) to provide the DOE, high level waste retrieval operators, and technology developers with centralized and focused location to share knowledge and expertise that will be used to address retrieval challenges across the DOE complex. The RKC is also designed to facilitate information sharing across the DOE Waste Site Complex through workshops, and a searchable database of waste retrieval technology information. The database may be used to research effective technology approaches for specific retrieval tasks and to take advantage of the lessons learned from previous operations. It is also expected to be effective for remaining current with state-of-the-art of retrieval technologies and ongoing development within the DOE Complex. To encourage collaboration of DOE sites with waste retrieval issues, the RKC team is co-led by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL). Two RKC workshops were held in the Fall of 2008. The purpose of these workshops was to define top level waste retrieval functional areas, exchange lessons learned, and develop a path forward to support a strategic business plan focused on technology needs for retrieval. The primary participants involved in these workshops included retrieval personnel and laboratory staff that are associated with Hanford and Savannah River Sites since the majority of remaining DOE waste tanks are located at these sites. This report summarizes and documents the results of the initial RKC workshops. Technology challenges identified from these workshops and presented here are expected to be a key component to defining future RKC-directed tasks designed to facilitate tank waste retrieval solutions.

  2. Perda de massa em ventos empoeirados de estrelas supergigantes

    NASA Astrophysics Data System (ADS)

    Vidotto, A. A.; Jatenco-Pereira, V.

    2003-08-01

    Em praticamente todas as regiões do diagrama HR, as estrelas apresentam evidências observacionais de perda de massa. Na literatura, pode-se encontrar trabalhos que tratam tanto do diagnóstico da perda de massa como da construção de modelos que visam explicá-la. O amortecimento de ondas Alfvén tem sido utilizado como mecanismo de aceleração de ventos homogêneos. Entretanto, sabe-se que os envelopes de estrelas frias contêm grãos sólidos e moléculas. Com o intuito de estudar a interação entre as ondas Alfvén e a poeira e a sua conseqüência na aceleração do vento estelar, Falceta-Gonçalves & Jatenco-Pereira (2002) desenvolveram um modelo de perda de massa para estrelas supergigantes. Neste trabalho, apresentamos um estudo do modelo acima proposto para avaliar a dependência da taxa de perda de massa com alguns parâmetros iniciais como, por exemplo, a densidade r0, o campo magnético B0, o comprimento de amortecimento da onda L0, seu fluxo f0, entre outros. Sendo assim, aumentando f0 de 10% a partir de valores de referência, vimos que aumenta consideravelmente, enquanto que um aumento de mesmo valor em r0, B0 e L0 acarreta uma diminuição em .

  3. Timely bystander CPR improves outcomes despite longer EMS times.

    PubMed

    Park, Gwan Jin; Song, Kyoung Jun; Shin, Sang Do; Lee, Kyung Won; Ahn, Ki Ok; Lee, Eui Jung; Hong, Ki Jeong; Ro, Young Sun

    2017-08-01

    This study aimed to determine the impact of bystander CPR on clinical outcomes in patients with increasing response time from collapse to EMS response. A population-based observational study was conducted in patients with witnessed out-of-hospital cardiac arrest (OHCA) of presumed cardiac etiology from 2012 to 2014. The time interval from collapse to CPR by EMS providers was categorized into quartile groups: fastest group (<4min), fast group (4 to <8min), late group (8 to <15min), and latest group (15 to <30min). The primary outcome was hospital discharge and the secondary outcome was survival with good neurological outcome. Multivariable logistic regression analysis was performed to evaluate the interaction between bystander CPR and the time interval from collapse to CPR by EMS providers. A total of 15,354 OHCAs were analyzed. Bystander CPR was performed in 8591 (56.0%). Survival to hospital discharge occurred in 1632 (10.6%) and favorable neurological outcome in 996 (6.5%). In an interaction model of bystander CPR, compared to the fastest group, adjusted odds ratios (AORs) (95% CIs) for survival to discharge were 0.89 (0.66-1.20) in the fast group, 0.76 (0.57-1.02) in the late group, and 0.52 (0.37-0.73) in the latest group. For favorable neurological outcome, AORs were 1.12 (0.77-1.62) in the fast group, 0.90 (0.62-1.30) in the late group, 0.59 (0.38-0.91) in the latest group. The survival from OHCA decreases as the ambulance response time increases. The increase in mortality and worsening neurologic outcomes appear to be mitigated in those patients who receive bystander CPR. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Covariance Matrix Estimation for the Cryo-EM Heterogeneity Problem*

    PubMed Central

    Katsevich, E.; Katsevich, A.; Singer, A.

    2015-01-01

    In cryo-electron microscopy (cryo-EM), a microscope generates a top view of a sample of randomly oriented copies of a molecule. The problem of single particle reconstruction (SPR) from cryo-EM is to use the resulting set of noisy two-dimensional projection images taken at unknown directions to reconstruct the three-dimensional (3D) structure of the molecule. In some situations, the molecule under examination exhibits structural variability, which poses a fundamental challenge in SPR. The heterogeneity problem is the task of mapping the space of conformational states of a molecule. It has been previously suggested that the leading eigenvectors of the covariance matrix of the 3D molecules can be used to solve the heterogeneity problem. Estimating the covariance matrix is challenging, since only projections of the molecules are observed, but not the molecules themselves. In this paper, we formulate a general problem of covariance estimation from noisy projections of samples. This problem has intimate connections with matrix completion problems and high-dimensional principal component analysis. We propose an estimator and prove its consistency. When there are finitely many heterogeneity classes, the spectrum of the estimated covariance matrix reveals the number of classes. The estimator can be found as the solution to a certain linear system. In the cryo-EM case, the linear operator to be inverted, which we term the projection covariance transform, is an important object in covariance estimation for tomographic problems involving structural variation. Inverting it involves applying a filter akin to the ramp filter in tomography. We design a basis in which this linear operator is sparse and thus can be tractably inverted despite its large size. We demonstrate via numerical experiments on synthetic datasets the robustness of our algorithm to high levels of noise. PMID:25699132

  5. Accuracy of EMS-Reported Last Known Normal Times in Suspected Acute Stroke Patients

    PubMed Central

    Curfman, David; Connor, Lisa Tabor; Moy, Hawnwan Philip; Heitsch, Laura; Panagos, Peter; Lee, Jin-Moo; Tan, David K.; Ford, Andria L.

    2014-01-01

    Background and Purpose The last known normal (LKN) time is a critical determinant of IV tPA eligibility; however, the accuracy of EMS-reported LKN times is unknown. We determined the congruence between EMS-reported and neurologist-determined LKN times and identified predictors of incongruent LKN times. Methods We prospectively collected EMS-reported LKN times for patients brought into the ED with suspected acute stroke and calculated the absolute difference between the EMS-reported and neurologist-determined LKN times (|ΔLKN|). We determined the rate of inappropriate IV tPA use if EMS-reported times had been used in place of neurologist-determined times. Univariate and multivariable linear regression assessed for any predictors of prolonged |ΔLKN|. Results Of 251 patients, mean and median |ΔLKN| were 28 and 0 minutes, respectively. |ΔLKN| was <15 min in 91% of the entire cohort and was <15 min in 80% of patients with a diagnosis of stroke (n=86). Of patients who received IV tPA, none would have been incorrectly excluded from IV tPA if the EMS LKN time had been used. Conversely, of patients who did not receive IV tPA, 6% would have been incorrectly included for IV tPA consideration had the EMS time been used. In patients with wake-up stroke symptoms, EMS underestimated LKN times: mean EMS LKN time - neurologist LKN time = −208 minutes. The presence of wake-up stroke symptoms (p<0.0001) and older age (p=0.019) were independent predictors of prolonged |ΔLKN|. Conclusions EMS-reported LKN times were largely congruent with neurologist-determined times. Focused EMS training regarding wake-up stroke symptoms may further improve accuracy. PMID:24643409

  6. Theme park EMS. It's no Mickey Mouse operation.

    PubMed

    Philips, J H

    1995-07-01

    In a single shift, they can rescue someone trapped in a time warp, perform CPR while menacing monsters look over their shoulders or calmly watch as a motorboat chase ends in a huge ball of fire. It's just another routine day for EMS providers in America's theme parks, where getting ready for unusual calls is the norm. JEMS went behind the scenes with theme park responders to explore the unique challenges of their service environment. What we found was a group of super-dedicated professionals who place genuine hospitality right alongside quality patient care.

  7. The White Dwarf in EM Cygni: Beyond the Veil

    DTIC Science & Technology

    2009-07-10

    reserved. Printed in the U.S.A. THE WHITE DWARF IN EM CYGNI: BEYOND THE VEIL∗ Patrick Godon1,4, Edward M. Sion1, Paul E. Barrett2, and Albert P. Linnell3 1...However, more recent full three-dimensional hydrodynami- cal simulations, e.g., (Blondin 1998; Kunze et al. 2001; Bisikalo et al. 2003), have followed...deflection is believed to cause X-ray absorption in CVs (and LMXBs) around orbital phase 0.7, if the inclination is at least 65◦ ( Kunze et al. 2001

  8. EMS Bill of Rights: what every patient deserves.

    PubMed

    Meador, Steven R; Slovis, Corey M; Wrenn, Keith D

    2003-03-01

    Every EMT, paramedic, supervisor and EMS medical director must stress that our job is to treat every patient the way we'd like to be treated or the way we'd want one of our family members treated. Those charged with supervision must ensure that EMTs and paramedics receive the support and training necessary to allow adherence to the 10 objectives outlined in this article. Quality-assurance reviews, quality-improvement programs, provider comments and complaints from the public must all be used to improve the care we deliver. Prehospital care should be constantly improving the delivery of excellent, life-saving care.

  9. A compulsator driven rapid-fire EM-gun

    SciTech Connect

    Pratap, S.B.; Bird, W.L.

    1984-03-01

    A compulsator-driven railgun is an attractive alternative to the homopolar generator-inductor-switch configuration, especially for repetitive duty. A conceptual design of a rapid-fire EM-gun system is presented. The generator is sized to accelerate a 0.08-kg projectile to 2 to 3 km/s at a 60 pulse-per-second repetition rate. Initial design parameters are discussed, and example current and velocity waveforms are given. The generator is discharged at the proper phase angle to provide a current zero just as the projectile exits the muzzle of the railgun.

  10. Unravelling the structures of biological macromolecules by cryo-EM

    PubMed Central

    Fernandez-Leiro, Rafael; Scheres, Sjors H.W.

    2016-01-01

    Preface Understanding how proteins and other biological macromolecules perform their complicated tasks in the living cell is often aided by knowledge of their three-dimensional structures. Because many tasks involve the cleavage or formation of chemical bonds, structural characterisation at the atomic level is most useful. Recent developments in electron microscopy of frozen hydrated samples (cryo-EM) have provided unprecedented opportunities for the structural characterization of biological macromolecules. This is resulting in a wave of new information about biological processes that were impossible to characterize with previously existing techniques in structural biology. PMID:27629640

  11. State of the Art in EM Field Computation

    SciTech Connect

    Ng, C.; Akcelik, V.; Candel, A.; Chen, S.; Folwell, N.; Ge, L.; Guetz, A.; Jiang, H.; Kabel, A.; Lee, L.-Q.; Li, Z.; Prudencio, E.; Schussman, G.; Uplenchwar, R.; Xiao, L.; Ko, K.; /SLAC

    2006-09-25

    This paper presents the advances in electromagnetic (EM) field computation that have been enabled by the US DOE SciDAC Accelerator Science and Technology project which supports the development and application of a suite of electromagnetic codes based on the higher-order finite element method. Implemented on distributed memory supercomputers, this state of the art simulation capability has produced results which are of great interest to accelerator designers and with realism previously not possible with standard codes. Examples from work on the International Linear Collider (ILC) project are described.

  12. EMS response at a hazardous material incident: some basic guidelines.

    PubMed

    Plante, D M; Walker, J S

    1989-01-01

    Emergency medical response to a scene where hazardous materials are potentially involved is becoming more commonplace. Following routine response procedures could result in the incapacitation of the rescue crew. Unique to this paper are some suggestions from the fire fighting literature on how to deal with these incidents. As with any type of potential disaster, it has been found that response is much more effective if potential problems are examined beforehand and protocols developed. Emergency physicians in their role as on-site emergency medical services (EMS) medical controllers should play a leading part in the development and implementation of these protocols.

  13. Single-particle cryo-EM at crystallographic resolution

    PubMed Central

    Cheng, Yifan

    2015-01-01

    Until only a few years ago, single-particle electron cryo-microscopy (cryo-EM) was usually not the first choice for many structural biologists due to its limited resolution in the range of nanometer to subnanometer. Now, this method rivals X-ray crystallography in terms of resolution and can be used to determine atomic structures of macromolecules that are either refractory to crystallization or difficult to crystallize in specific functional states. In this review, I discuss the recent breakthroughs in both hardware and software that transformed cryo-microscopy, enabling understanding of complex biomolecules and their functions at atomic level. PMID:25910205

  14. The influence of macrofouling on the corrosion behaviour of API 5L X65 carbon steel.

    PubMed

    de Brito, Luciana V R; Coutinho, Ricardo; Cavalcanti, Eduardo H S; Benchimol, Marlene

    2007-01-01

    Seawater is a complex corrosive system, and biofouling is one of the factors that influences corrosion processes. The behaviour of corrosion associated with the development of macrofouling was investigated during the first 6 months of the successional process. Three treatments were compared: the 'Control' treatment (absence of macrofouling); 'Community' treatment, and 'Barnacle' treatment, where other macroorganisms were excluded. In the Community treatment, the dominant organisms were filamentous macroalgae (23.73%), barnacles (17.51%), hydroids (16.96%) and encrusting bryozoans (9.58%). In the Barnacle treatment, the cover varied between 39.38% and 62.50%. The corrosion potential ranged from -665.75 to -517.50 mV(Ag/AgC l((KCl))) and could not be associated with fouling development. The highest corrosion rate in the control suggests that macrofouling provides a protection against mass loss. The highest percentage of localised attacks was found in the Community treatment. This may indicate that not only barnacles, but also other organisms induce localised corrosion.

  15. Conversion of Input Data between KENO V.a and MCNP File Formats, Version 5L.

    SciTech Connect

    SCHWARZ, RANDY A.

    2007-10-31

    Version 00 The KENO2MCNP program was written to convert KENO V.a input files to MCNP Format. This program currently only works with KENO Va geometries and will not work with geometries that contain more than a single array. A C++ graphical user interface was created that was linked to Fortran routines from KENO V.a that read the material library and Fortran routines from the MCNP Visual Editor that generate the MCNP input file. Either SCALE 5.0 or SCALE 5.1 cross section files will work with this release. This version of KENO2MCNP was tested with CCC-730/MCNP5 1.40 and with CCC-725/SCALE5.0 and CCC-732/SCALE 5.1. Note that this distribution does not include either MCNP or SCALE, which are available separately through either RSICC or the NEA Data Bank.

  16. Crystallization of the C-terminal domain of the bacteriophage T5 L-shaped fibre.

    PubMed

    Garcia-Doval, Carmela; Luque, Daniel; Castón, José R; Boulanger, Pascale; van Raaij, Mark J

    2013-12-01

    Tails of bacteriophage T5 (a member of the Siphoviridae family) were studied by electron microscopy. For the distal parts of the L-shaped tail fibres, which are involved in host cell receptor binding, a low-resolution volume was calculated. Several C-terminal fragments of the fibre were expressed and purified. Crystals of two of them were obtained that belonged to space groups P63 and R32 and diffracted synchrotron radiation to 2.3 and 2.9 Å resolution, respectively. A single-wavelength anomalous dispersion data set to 2.5 Å resolution was also collected from a selenomethionine-derivatized crystal of one of the fragments, which belonged to space group C2.

  17. Demonstrate a Leap-Ahead EM Gun Armament System that Proves the Maturity of the Technology for Future Combat Systems

    DTIC Science & Technology

    2001-03-26

    This report, comprised of viewgraphs, discusses the Army EM program and the challenges it faces. Topics include pulsed power, hypervelocity lethality plans, systems and technology integration , and the army EM gun program.

  18. EMS Attitudes Towards Geriatric Prehospital Care And Continuing Medical Education in Geriatrics

    PubMed Central

    Peterson, Lars-Kristofer N.; Fairbanks, Rollin J.; Hettinger, Aaron Z.; Shah, Manish N.

    2008-01-01

    Objectives To understand the opinions of emergency medical service (EMS) providers regarding their ability to care for older adults, the domains of geriatric medicine in which they need more training, and the modality through which continuing education could be best delivered. Design Qualitative study using key informant interviews. Setting Prehospital EMS system in Rochester, New York. Participants EMS providers, EMS instructors and administrators, emergency physicians, and geriatricians. Outcome Measures Semi-structured interviews were conducted using an interview guide that addressed the following domains: 1)knowledge and skill deficiencies; 2)recommendations for improvement of geriatrics continuing education; 3)delivery methods of education. Results Participant responses were generally congruous despite the diverse backgrounds, and redundancy was achieved rapidly. All participants perceived a deficit in EMS education on the care of older adults, particularly related to communications with patients and skilled nursing facility staff. All desired more geriatric continuing education for EMS providers, especially in communications and psychosocial issues. Education was desired in various modalities. Conclusion Further geriatrics continuing education for EMS providers is needed. Some specific topics relate to medical issues, but a large proportion involve communications and psychosocial issues. Education should be delivered in a variety of modalities to meet the needs of the EMS community. Emerging online video technologies may bridge the gap between learners preferring classroom based modailities and those preferring self-study modules. PMID:19170777

  19. Developing State and National Evaluation Infrastructures- Guidance for the Challenges and Opportunities of EM&V

    SciTech Connect

    Schiller, Steven R.; Goldman, Charles A.

    2011-06-24

    Evaluating the impacts and effectiveness of energy efficiency programs is likely to become increasingly important for state policymakers and program administrators given legislative mandates and regulatory goals and increasing reliance on energy efficiency as a resource. In this paper, we summarize three activities that the authors have conducted that highlight the expanded role of evaluation, measurement and verification (EM&V): a study that identified and analyzed challenges in improving and scaling up EM&V activities; a scoping study that identified issues involved in developing a national efficiency EM&V standard; and lessons learned from providing technical assistance on EM&V issues to states that are ramping up energy efficiency programs. The lessons learned are summarized in 13 EM&V issues that policy makers should address in each jurisdiction and which are listed and briefly described. The paper also discusses how improving the effectiveness and reliability of EM&V will require additional capacity building, better access to existing EM&V resources, new methods to address emerging issues and technologies, and perhaps foundational documents and approaches to improving the credibility and cross jurisdictional comparability of efficiency investments. Two of the potential foundational documents discussed are a national EM&V standard or resource guide and regional deemed savings and algorithm databases.

  20. Broadband EM radiation amplification by means of a monochromatically driven two-level system

    NASA Astrophysics Data System (ADS)

    Soldatov, Andrey V.

    2017-02-01

    It is shown that a two-level quantum system possessing dipole moment operator with permanent non-equal diagonal matrix elements and driven by external semiclassical monochromatic high-frequency electromagnetic (EM) (laser) field can amplify EM radiation waves of much lower frequency.

  1. Method for evaluating compatibility of commercial electromagnetic (EM) microsensor tracking systems with surgical and imaging tables

    NASA Astrophysics Data System (ADS)

    Nafis, Christopher; Jensen, Vern; von Jako, Ron

    2008-03-01

    Electromagnetic (EM) tracking systems have been successfully used for Surgical Navigation in ENT, cranial, and spine applications for several years. Catheter sized micro EM sensors have also been used in tightly controlled cardiac mapping and pulmonary applications. EM systems have the benefit over optical navigation systems of not requiring a line-of-sight between devices. Ferrous metals or conductive materials that are transient within the EM working volume may impact tracking performance. Effective methods for detecting and reporting EM field distortions are generally well known. Distortion compensation can be achieved for objects that have a static spatial relationship to a tracking sensor. New commercially available micro EM tracking systems offer opportunities for expanded image-guided navigation procedures. It is important to know and understand how well these systems perform with different surgical tables and ancillary equipment. By their design and intended use, micro EM sensors will be located at the distal tip of tracked devices and therefore be in closer proximity to the tables. Our goal was to define a simple and portable process that could be used to estimate the EM tracker accuracy, and to vet a large number of popular general surgery and imaging tables that are used in the United States and abroad.

  2. EMS Instructor Training Program. National Standard Curriculum. Instructor Guide. Student Guide.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    This guide for teaching a course to prepare emergency medical service (EMS) trainers focuses on the skills necessary to present any of the Department of Transportation (DOT), National Highway Traffic Safety Administration (NHTSA) EMS courses. Course topics are as follows: (1) introduction; (2) instructor roles and responsibilities; (3) legal…

  3. Global Convergence of the EM Algorithm for Unconstrained Latent Variable Models with Categorical Indicators

    ERIC Educational Resources Information Center

    Weissman, Alexander

    2013-01-01

    Convergence of the expectation-maximization (EM) algorithm to a global optimum of the marginal log likelihood function for unconstrained latent variable models with categorical indicators is presented. The sufficient conditions under which global convergence of the EM algorithm is attainable are provided in an information-theoretic context by…

  4. Global Convergence of the EM Algorithm for Unconstrained Latent Variable Models with Categorical Indicators

    ERIC Educational Resources Information Center

    Weissman, Alexander

    2013-01-01

    Convergence of the expectation-maximization (EM) algorithm to a global optimum of the marginal log likelihood function for unconstrained latent variable models with categorical indicators is presented. The sufficient conditions under which global convergence of the EM algorithm is attainable are provided in an information-theoretic context by…

  5. The Effect of Older Age on EMS Use for Transportation to an Emergency Department.

    PubMed

    Jones, Courtney M C; Wasserman, Erin B; Li, Timmy; Amidon, Ashley; Abbott, Marissa; Shah, Manish N

    2017-02-13

    Introduction Previous studies have found that older adults are more likely to use Emergency Medical Services (EMS) than younger adults, but the reasons for this remain understudied. Hypothesis/Problem This study aimed to determine if older age is associated with using EMS for transportation to an emergency department (ED) after controlling for confounding variables.

  6. Disaster Relief and Emergency Medical Services Project (DREAMS TM): Digital EMS

    DTIC Science & Technology

    2000-10-01

    38 11.1.3 Physician Map and Navigation Interface................................................... 38 11.1.4 Physician Run Record Copy...42 11.2.4 Map & Navigation Interface ................................................................ 42...must be developed for use by the Digital EMS system. 0 Mapping and Navigation Location and route values must be maintained for each Digital EMS emergency

  7. Covariance Structure Model Fit Testing under Missing Data: An Application of the Supplemented EM Algorithm

    ERIC Educational Resources Information Center

    Cai, Li; Lee, Taehun

    2009-01-01

    We apply the Supplemented EM algorithm (Meng & Rubin, 1991) to address a chronic problem with the "two-stage" fitting of covariance structure models in the presence of ignorable missing data: the lack of an asymptotically chi-square distributed goodness-of-fit statistic. We show that the Supplemented EM algorithm provides a…

  8. Improvement of coverage and utilization of EmOC services in southwestern Bangladesh.

    PubMed

    Islam, M T; Hossain, M M; Islam, M A; Haque, Y A

    2005-12-01

    The Government of Bangladesh has implemented safe motherhood programs throughout the country supported by the United Nations Children's Fund (UNICEF) and United Nations Population Fund (UNFPA) aimed at reducing maternal morbidity and mortality. The objective of this study is to assess the effect of the interventions on the UN emergency obstetric care (EmOC) process indicators in Khulna division, Bangladesh. Of the 71 government health facilities in Khulna division, 32 were providing comprehensive and 20 were providing basic EmOC services. Another 4 facilities were providing comprehensive or basic EmOC services during the first three-quarters but became non-functional during the last quarter. EmOC data, from January to December 2002, were collected from all these 56 facilities to determine the levels of EmOC process indicators relative to the UN guidelines and compared with baseline data from 1998 to 1999. There were 1.04 and 0.64 comprehensive and basic EmOC facilities respectively per 500,000 population. When compared with the baseline data, the coverage of comprehensive EmOC services was substantially increased from 0.23 to 1.04 per 500,000 population, which achieves the minimum UN standards but the coverage of basic EmOC services remained the same. The data also showed that, compared with the baseline survey, the proportion of births at the EmOC facilities increased 119% from 5.3% to 11.7% (p<0.001), met need increased 141% from 11.1% to 26.6% (p<0.001), and cesarean section as a proportion of all expected births, increased 151% from 0.5% to 1.3% (p<0.001), while the overall case fatality rate (CFR) decreased by 51% (p<0.001). With the exception of coverage of basic EmOC after the interventions, there was significant improvement in all the EmOC process indicators in Khulna division. However, most of the process indicators are still far from the minimum recommended UN standards. Efforts should continue to keep the EmOC facilities functional 24/7 while increasing

  9. Robust EM Continual Reassessment Method in Oncology Dose Finding

    PubMed Central

    Yuan, Ying; Yin, Guosheng

    2012-01-01

    The continual reassessment method (CRM) is a commonly used dose-finding design for phase I clinical trials. Practical applications of this method have been restricted by two limitations: (1) the requirement that the toxicity outcome needs to be observed shortly after the initiation of the treatment; and (2) the potential sensitivity to the prespecified toxicity probability at each dose. To overcome these limitations, we naturally treat the unobserved toxicity outcomes as missing data, and use the expectation-maximization (EM) algorithm to estimate the dose toxicity probabilities based on the incomplete data to direct dose assignment. To enhance the robustness of the design, we propose prespecifying multiple sets of toxicity probabilities, each set corresponding to an individual CRM model. We carry out these multiple CRMs in parallel, across which model selection and model averaging procedures are used to make more robust inference. We evaluate the operating characteristics of the proposed robust EM-CRM designs through simulation studies and show that the proposed methods satisfactorily resolve both limitations of the CRM. Besides improving the MTD selection percentage, the new designs dramatically shorten the duration of the trial, and are robust to the prespecification of the toxicity probabilities. PMID:22375092

  10. Chapter 19: HVAC Controls (DDC/EMS/BAS) Evaluation Protocol

    SciTech Connect

    Romberger, J.

    2014-11-01

    The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions. This protocol addresses only HVAC-related equipment and the energy savings estimation methods associated with installing such control systems as an energy efficiency measure. The affected equipment includes: Air-side equipment (air handlers, direct expansion systems, furnaces, other heating- and cooling-related devices, terminal air distribution equipment, and fans); Central plant equipment (chillers, cooling towers, boilers, and pumps). These controls may also operate or affect other end uses, such as lighting, domestic hot water, irrigation systems, and life safety systems such as fire alarms and other security systems. Considerable nonenergy benefits, such as maintenance scheduling, system component troubleshooting, equipment failure alarms, and increased equipment lifetime, may also be associated with these systems. When connected to building utility meters, these systems can also be valuable demand-limiting control tools. However, this protocol does not evaluate any of these additional capabilities and benefits.

  11. Viewing Direction Estimation in Cryo-EM Using Synchronization*

    PubMed Central

    Shkolnisky, Yoel; Singer, Amit

    2013-01-01

    A central task in recovering the structure of a macromolecule from cryo-electron microscopy (cryo-EM) images is to determine a three-dimensional model of the macromolecule given many of its two-dimensional projection images. The direction from each image taken the images which was is unknown, and are small and extremely noisy. The goal is to determine the direction from which each image was taken and then to combine the images into a three-dimensional model of the molecule. We present an algorithm for determining the viewing direction of all cryo-EM images at once, which is robust to high levels of noise. The algorithm is based on formulating the problem as a synchronization problem; that is, we estimate the relative spatial configuration of pairs of images and then estimate a global assignment of orientations that maximizes the number of satisfied pairwise relations. Information about the spatial relation between pairs of images is extracted from common lines between triplets of images. These noisy pairwise relations are combined into a single consistent assignment of orientations by constructing a matrix whose entries encode the pairwise relations. This matrix is shown to have rank 3, and its nontrivial eigenspace is shown to reveal the projection orientation of each image. In particular, we show that the nontrivial eigenvectors encode the rotation matrix that corresponds to each image. PMID:24363820

  12. A Generalized Fast Frequency Sweep Algorithm for Coupled Circuit-EM Simulations

    SciTech Connect

    Rockway, J D; Champagne, N J; Sharpe, R M; Fasenfest, B

    2004-01-14

    Frequency domain techniques are popular for analyzing electromagnetics (EM) and coupled circuit-EM problems. These techniques, such as the method of moments (MoM) and the finite element method (FEM), are used to determine the response of the EM portion of the problem at a single frequency. Since only one frequency is solved at a time, it may take a long time to calculate the parameters for wideband devices. In this paper, a fast frequency sweep based on the Asymptotic Wave Expansion (AWE) method is developed and applied to generalized mixed circuit-EM problems. The AWE method, which was originally developed for lumped-load circuit simulations, has recently been shown to be effective at quasi-static and low frequency full-wave simulations. Here it is applied to a full-wave MoM solver, capable of solving for metals, dielectrics, and coupled circuit-EM problems.

  13. Fabrication and EM shielding properties of electrospining PANi/MWCNT/PEO fibrous membrane and its composite

    NASA Astrophysics Data System (ADS)

    Zhang, Zhichun; Jiang, Xueyong; Liu, Yanju; Leng, Jinsong

    2012-04-01

    In this paper, Polyaniline-based fibrous membranes were fabricated with multi-walled carbon nanotubes and polyethylene oxide (PEO) by the electrospinning method. And then PANi/PEO/MWCNT fibrous membranes reinforced epoxy based nanocomposite was then fabricated. The morphology and electrical properties of PANi /MWCNT /PEO fibrous membrane was characterized by scanning electron microscope (SEM). The morphologies of the membranes indicate that the electrospining method can fabricate well nano structures fibrous membrane. The EM properties of the composite reinforced with the electrospining fibrous membrane were measured by vector network analyzer. The results show that the permittivity real, image parts and permeability real part of the composite increase by filling with PANI/PEO and PANI/CNT/PEO membrane. The EM shielding and absorb performance is base on the dielectric dissipation. And different membranes made of different materials show different EM parameter, and different EM shielding performance, which can be used to the EM shielding and stealth material design and fabrication.

  14. Surgical treatment of moyamoya disease in children: which is more effective procedure, EDAS or EMS?

    PubMed

    Fujita, K; Tamaki, N; Matsumoto, S

    1986-01-01

    At present, encephaloduroarteriosynangiosis (EDAS) and encephalomyosynangiosis (EMS) are the treatments of choice for moyamoya disease in children, but no attempts have been made to determine which is the more effective procedure, for the ischemic lesions in moyamoya disease. Ten patients (seven children and three adults) underwent EDAS and/or EMS: three patients EDAS on both sides; seven patients EDAS on one side and EMS on the other. These ten patients were followed up with a neurological examination and r-CBF and angiographic studies. Postoperative angiograms and r-CBF studies demonstrated more revascularization from the external carotid artery in sides treated with EDAS than with sides treated with EMS. From these results, it is concluded that the EDAS surgical procedure is superior to that of EMS for moyamoya disease.

  15. The EM/MPM algorithm for segmentation of textured images: analysis and further experimental results.

    PubMed

    Comer, M L; Delp, E J

    2000-01-01

    In this paper we present new results relative to the "expectation-maximization/maximization of the posterior marginals" (EM/MPM) algorithm for simultaneous parameter estimation and segmentation of textured images. The EM/MPM algorithm uses a Markov random field model for the pixel class labels and alternately approximates the MPM estimate of the pixel class labels and estimates parameters of the observed image model. The goal of the EM/MPM algorithm is to minimize the expected value of the number of misclassified pixels. We present new theoretical results in this paper which show that the algorithm can be expected to achieve this goal, to the extent that the EM estimates of the model parameters are close to the true values of the model parameters. We also present new experimental results demonstrating the performance of the EM/MPM algorithm.

  16. High-Resolution Cryo-EM Maps and Models: A Crystallographer's Perspective.

    PubMed

    Wlodawer, Alexander; Li, Mi; Dauter, Zbigniew

    2017-08-10

    The appearance of ten high-resolution cryoelectron microscopy (cryo-EM) maps of proteins, ribosomes, and viruses was compared with the experimentally phased crystallographic electron density maps of four proteins. We found that maps calculated at a similar resolution by the two techniques are quite comparable in their appearance, although cryo-EM maps, even when sharpened, seem to be a little less detailed. An analysis of models fitted to the cryo-EM maps indicated the presence of significant problems in almost all of them, including incorrect geometry, clashes between atoms, and discrepancies between the map density and the fitted models. In particular, the treatment of the atomic displacement (B) factors was meaningless in almost all analyzed cryo-EM models. Stricter cryo-EM structure deposition standards and their better enforcement are needed. Published by Elsevier Ltd.

  17. Correlates of perceived care comfort with an EMS professional having a legal conviction.

    PubMed

    Blau, Gary; Gibson, Gregory

    2012-08-01

    The first objective was to examine the outcome of how comfortable a potential EMS-caller would be receiving care from an out-of-hospital-care EMS professional who might have a legal conviction. A second objective was to test for correlates that would explain this outcome. In the autumn of 2010, a structured phone survey was conducted. To maximize geographical representation across the contiguous United States, a clustered, stratified sampling strategy was used based upon US Postal Service zip codes. Of the 2,443 phone calls made, 1,051 (43%) full survey responses were obtained. Data cleaning efforts reduced the total to 929 in the final model regression analysis. Results revealed significant public discomfort in receiving care from EMS professionals who may have such a conviction. In addition, respondents who are less educated and older more strongly (1) agree that EMS professionals should have their licenses revoked for wrong doing; (2) agree EMS professionals should be screened before being hired; (3) perceive EMS credentials to be important; (4) support a lawsuit for improper care; and (5) are collectively less comfortable with being cared for by an EMS professional who may have a legal conviction. Reliable scales were found for future research use. There is significant public discomfort in receiving care from EMS professionals who may have a legal conviction. The results of this study provide increased impetus for the careful screening of EMS professionals before they are hired or allowed to be volunteers. Beyond this due diligence, the results serve as a reminder for increased EMS provider awareness of the importance of exhibiting professionalism when dealing with the public.

  18. Time of Day and Day of Week Trends in EMS Demand.

    PubMed

    Cantwell, Kate; Morgans, Amee; Smith, Karen; Livingston, Michael; Spelman, Tim; Dietze, Paul

    2015-01-01

    We examined temporal variations in overall Emergency Medical Services (EMS) demand, as well as medical and trauma cases separately. We analyzed cases according to time of day and day of week to determine whether population level demand demonstrates temporal patterns that will increase baseline knowledge for EMS planning. We conducted a secondary analysis of data from the Ambulance Victoria data warehouse covering the period 2008-2011. We included all cases of EMS attendance which resulted in 1,203,803 cases for review. Data elements comprised age, gender, date and time of call to the EMS emergency number along with the clinical condition of the patient. We employed Poisson regression to analyze case numbers and trigonometric regression to quantify distribution patterns. EMS demand exhibited a bimodal distribution with the highest peak at 10:00 and a second smaller peak at 19:00. The highest number of cases occurred on Fridays, and the lowest on Tuesdays and Wednesdays. However, the distribution of cases throughout the day differed by day of week. Distribution patterns on Fridays, Saturdays and Sundays differed significantly from the rest of the week (p < 0.001). When categorized into medical or trauma cases, medical cases were more frequent during working hours and involved patients of higher mean age (57 years vs. 49 years for trauma, p < 0.001). Trauma cases peaked on Friday and Saturday nights around midnight. Day of week EMS demand distribution patterns reveal differences that can be masked in aggregate data. Day of week EMS demand distribution patterns showed not only which days have differences in demand but the times of day at which the demand changes. Patterns differed by case type as well. These differences in distribution are important for EMS demand planning. Increased understanding of EMS demand patterns is imperative in a climate of ever-increasing demand and fiscal constraints. Further research is needed into the effect of age and case type on EMS

  19. Estudo em microondas do aprisionamento e precipitação de elétrons em explosões solares

    NASA Astrophysics Data System (ADS)

    Rosal, A. C.; Costa, J. E. R.

    2003-08-01

    Uma explosão solar é uma variação rápida e intensa do brilho que ocorre nas chamadas regiões ativas da atmosfera, constituídas por um plasma magnetizado com intensa indução magnética. Os modelos de explosões solares atuais, discutidos na literatura, apresentam características de aprisionamento e precipitação de elétrons em ambientes magnéticos simplificados. Neste trabalho, nos propusemos a separar a emissão dos elétrons aprisionados da emissão dos elétrons em precipitação apenas a partir da emissão em microondas, melhorando portanto o controle sobre o conjunto de parâmetros inferidos. A emissão em microondas da população em precipitação é bastante fraca e portanto da nossa base de dados de 130 explosões observadas pelo Rádio Polarímetro de Nobeyama, em sete freqüências, apenas para 32 foi possível separar as duas componentes de emissão com uma boa razão sinal/ruído. A partir de estudos das escalas de tempo das emissões devidas à variação gradual da emissão no aprisionamento e da variação rápida da emissão dos elétrons em precipitação foi possível obter a separação utilizando um filtro temporal nas emissões resultantes. Em nossa análise destas explosões estudamos os espectros girossincrotrônicos da emissão gradual, a qual associamos provir do topo dos arcos magnéticos e da emissão de variação rápida associada aos elétrons em precipitação. Estes espectros foram calculados e dos quais inferimos que a indução magnética efetiva do topo e dos pés foi em média, Btopo = 236 G e Bpés = 577 G, inferidas das freqüências de pico dos espectros em ntopo = 11,8 GHz e npés = 14,6 GHz com leve anisotropia (pequeno alargamento espectral). O índice espectral da distribuição não-térmica de elétrons d, inferido do índice espectral de fótons da emissão em regime opticamente fino, foi de dtopo = 3,3 e dpés = 3,9. Estes parâmetros são típicos da maioria das análises realizadas em ambiente único de

  20. EMS Provider assessment of vehicle damage compared with assessment by a professional crash reconstructionist.

    PubMed

    Lerner, E Brooke; Cushman, Jeremy T; Blatt, Alan; Lawrence, Richard D; Shah, Manish N; Swor, Robert A; Brasel, Karen; Jurkovich, Gregory J

    2011-01-01

    To determine the accuracy of emergency medical services (EMS) provider assessments of motor vehicle damage when compared with measurements made by a professional crash reconstructionist. EMS providers caring for adult patients injured during a motor vehicle crash and transported to the regional trauma center in a midsized community were interviewed upon emergency department arrival. The interview collected provider estimates of crash mechanism of injury. For crashes that met a preset severity threshold, the vehicle's owner was asked to consent to having a crash reconstructionist assess the vehicle. The assessment included measuring intrusion and external automobile deformity. Vehicle damage was used to calculate change in velocity. Paired t-test, correlation, and kappa were used to compare EMS estimates and investigator-derived values. Ninety-one vehicles were enrolled; of these, 58 were inspected and 33 were excluded because the vehicle was not accessible. Six vehicles had multiple patients. Therefore, a total of 68 EMS estimates were compared with the inspection findings. Patients were 46% male, 28% were admitted to hospital, and 1% died. The mean EMS-estimated deformity was 18 inches and the mean measured deformity was 14 inches. The mean EMS-estimated intrusion was 5 inches and the mean measured intrusion was 4 inches. The EMS providers and the reconstructionist had 68% agreement for determination of external automobile deformity (kappa 0.26) and 88% agreement for determination of intrusion (kappa 0.27) when the 1999 American College of Surgeons Field Triage Decision Scheme criteria were applied. The mean (± standard deviation) EMS-estimated speed prior to the crash was 48 ± 13 mph and the mean reconstructionist-estimated change in velocity was 18 ± 12 mph (correlation -0.45). The EMS providers determined that 19 vehicles had rolled over, whereas the investigator identified 18 (kappa 0.96). In 55 cases, EMS and the investigator agreed on seat belt use; for

  1. The EM SSAB Annual Work Plan Process: Focusing Board Efforts and Resources - 13667

    SciTech Connect

    Young, Ralph

    2013-07-01

    One of the most daunting tasks for any new member of a local board of the Environmental Management Site Specific Advisory Board (EM SSAB) is to try to understand the scope of the clean-up activities going on at the site. In most cases, there are at least two or three major cleanup activities in progress as well as monitoring of past projects. When planning for future projects is added to the mix, the list of projects can be long. With the clean-up activities involving all major environmental media - air, water, soils, and groundwater, new EM SSAB members can find themselves totally overwhelmed and ineffective. Helping new members get over this initial hurdle is a major objective of EM and all local boards of the EM SSAB. Even as members start to understand the size and scope of the projects at a site, they can still be frustrated at the length of time it takes to see results and get projects completed. Many project and clean-up timelines for most of the sites go beyond 10 years, so it's not unusual for an EM SSAB member to see the completion of only 1 or 2 projects over the course of their 6-year term on the board. This paper explores the annual work planning process of the EM SSAB local boards, one tool that can be used to educate EM SSAB members into seeing the broader picture for the site. EM SSAB local work plans divide the site into projects focused on a specific environmental issue or media such as groundwater and/or waste disposal options. Projects are further broken down into smaller segments by highlighting major milestones. Using these metrics, local boards of the EM SSAB can start to quantify the effectiveness of the project in achieving the ultimate goal of site clean-up. These metrics can also trigger board advice and recommendations for EM. At the beginning of each fiscal year, the EM SSAB work plan provides a road map with quantifiable checkpoints for activities throughout the year. When the work plans are integrated with site-specific, enforceable

  2. EMS Dispatches during Hurricanes Irene and Sandy in New Jersey.

    PubMed

    Bucher, Joshua; McCoy, Jonathan; Donovan, Colleen; Patel, Snehal; Ohman-Strickland, Pamela; Dewan, Asa

    2017-08-31

    Hurricanes Irene and Sandy heavily impacted New Jersey. Investigating EMS dispatch trends during these storms may allow us to prepare for future disasters. Our objectives to characterize the types of EMS dispatches immediately before, during, and after landfall compared to a control period. This retrospective study was conducted at a large EMS dispatch center that provides first responders, Basic Life Support (BLS), Advanced Life Support (ALS), and critical care transport services to an area with approximately 20 receiving hospitals including a Level I Trauma Center. At peak staffing, there are 8-10 ALS vehicles, 25 BLS vehicles, and 3 critical care transport vehicles deployed. We included of the day of landfall and seven days before and after. We compared dispatch data to a control period in 2010 that mirrored Hurricane Sandy the dates of. Descriptive statistics and two way ANOVA were used to assess dispatch, gender and age differences. We found Hurricane Sandy dispatches peaked 2 days after landfall. Both ALS and BLS had an increase in age in the post-Sandy period compared to the pre-Sandy (ALS 58.5 to 64.2, p = 0.005, ANOVA p = 0.078; BLS 47.4 to 56.3, p < 0.001, ANOVA p = 0.001). There were 17 "hurricane related" (loss of power related issues, oxygen supply depleted, evacuation) and 15 carbon monoxide dispatches in the post-Sandy period and none in the others, including peri-Irene. The average age of cardiac arrest dispatches was lower in the post-Irene group compared to pre-Irene (74.3 to 47.8, p = 0.023). There were no critical care requests before or after Hurricane Sandy, but there were 14 around Hurricane Irene and 10 surrounding the control period. Dispatch data can inform natural disaster planning. Education efforts can focus on geriatric patients, as well as resource distribution planning for an increase in geriatric populations. However, pattern variability between storms shows further study is needed to clarify exactly which resources should be

  3. The White Dwarf in EM Cygni: Beyond the Veil

    NASA Astrophysics Data System (ADS)

    Godon, Patrick; Sion, Edward M.; Barrett, Paul E.; Linnell, Albert P.

    2009-07-01

    We present a spectral analysis of the Far Ultraviolet Spectroscopic Explorer (FUSE) spectra of the eclipsing double-line spectroscopic binary EM Cygni (EM Cyg), a Z Cam DN system. The FUSE spectrum, obtained in quiescence, consists of four individual exposures (orbits): two exposures, at orbital phases phi ~ 0.65 and phi ~ 0.90, have a lower flux; and two exposures, at orbital phases phi = 0.15 and 0.45, have a relatively higher flux. The change of flux level as a function of the orbital phase is consistent with the stream material (flowing over and below the disk from the hot spot region to smaller radii) partially masking the white dwarf. We carry out a spectral analysis of the FUSE data, obtained at phase 0.45 (when the flux is maximal), using synthetic spectra generated with the codes TLUSTY and SYNSPEC. Using a single white dwarf spectral component, we obtain a white dwarf temperature of 40, 000 K ± 1000 K, rotating at 100 km s-1. The white dwarf, or conceivably, the material overflowing the disk rim, shows suprasolar abundances of silicon, sulphur, and possibly nitrogen. Using a white dwarf+disk composite model, we obtain that the white dwarf temperature could be even as high as 50,000 K, contributing more than 90% of the FUV flux, and the disk contributing less than 10% must have a mass accretion rate reaching 10-10 M sun yr-1. The single white dwarf model fits the absorption lines better than the white dwarf+disk model, but the white dwarf+disk model fits better the continuum in the shorter wavelengths. In both cases, however, we obtain that the white dwarf temperature is much higher than previously estimated. We emphasize the importance of modeling the spectra of EM Cyg around phase phi < 0.5, when the white dwarf and disk are facing the observer, and we suggest that the discrepancy between the present analysis and previous spectral analysis might be due to the occulting effect of the stream veiling the white dwarf and disk. Based on observations made

  4. Main error factors, affecting inversion of EM data

    NASA Astrophysics Data System (ADS)

    Zuev, M. A.; Magomedov, M.; Korneev, V. A.; Goloshubin, G.; Zuev, J.; Brovman, Y.

    2013-12-01

    Inversions of EM data are complicated by a number of factors that need to be taken into account. These factors might contribute by tens of percents in data values, concealing responses from target objects, which usually contribute at the level of few percents only. We developed the exact analytical solutions of the EM wave equations that properly incorporate the contributions of the following effects: 1) A finite source size effect, where conventional dipole (zero-size) approximation brings 10-40% error compare to a real size source, needed to provide adequate signal-to-noise ratio. 2) Complex topography. A three-parametrical approach allows to keep the data misfits in 0.5% corridor while topography effect might be up to 40%. 3) Grounding shadow effect, caused by return ground currents, when Tx-line vicinity is horizontally non-uniform. By keeping survey setup within some reasonable geometrical ratios, the shadow effect comes to just one frequency-independent coefficient, which can be excluded from processing by using logarithmical derivatives. 4) Layer's wide spectral range effect. This brings to multi-layer spectral overlapping, so each frequency is affected by many layers; that requires wide spectral range processing, making the typical 'few-frequency data acquisition' non-reliable. 5) Horizontal sensitivity effect. The typical view at the target signal, reflected from a Tx-Rx mid-point is valid only for a ray approximation, reliable in a far-field zone. Unlike this, the real EM surveys usually work in near-field zone. Thus Tx-Rx mid-point does not represent the layer, so a sensitivity distribution function must be computed for each layer for the following 3D-unification process. 6) Wide range Rx-directions from mid-line Tx. Survey terrain often prevents placing Rx perpendicular to Tx-line, and even small deviations without proper corrections cause a significant inaccuracy. A radical simplification of the effect's description becomes possible after applying a

  5. THE WHITE DWARF IN EM CYGNI: BEYOND THE VEIL

    SciTech Connect

    Godon, Patrick; Sion, Edward M.; Barrett, Paul E.; Linnell, Albert P. E-mail: edward.sion@villanova.edu E-mail: linnell@astro.washington.edu

    2009-07-10

    We present a spectral analysis of the Far Ultraviolet Spectroscopic Explorer (FUSE) spectra of the eclipsing double-line spectroscopic binary EM Cygni (EM Cyg), a Z Cam DN system. The FUSE spectrum, obtained in quiescence, consists of four individual exposures (orbits): two exposures, at orbital phases {phi} {approx} 0.65 and {phi} {approx} 0.90, have a lower flux; and two exposures, at orbital phases {phi} = 0.15 and 0.45, have a relatively higher flux. The change of flux level as a function of the orbital phase is consistent with the stream material (flowing over and below the disk from the hot spot region to smaller radii) partially masking the white dwarf. We carry out a spectral analysis of the FUSE data, obtained at phase 0.45 (when the flux is maximal), using synthetic spectra generated with the codes TLUSTY and SYNSPEC. Using a single white dwarf spectral component, we obtain a white dwarf temperature of 40, 000 K {+-} 1000 K, rotating at 100 km s{sup -1}. The white dwarf, or conceivably, the material overflowing the disk rim, shows suprasolar abundances of silicon, sulphur, and possibly nitrogen. Using a white dwarf+disk composite model, we obtain that the white dwarf temperature could be even as high as 50,000 K, contributing more than 90% of the FUV flux, and the disk contributing less than 10% must have a mass accretion rate reaching 10{sup -10} M{sub sun} yr{sup -1}. The single white dwarf model fits the absorption lines better than the white dwarf+disk model, but the white dwarf+disk model fits better the continuum in the shorter wavelengths. In both cases, however, we obtain that the white dwarf temperature is much higher than previously estimated. We emphasize the importance of modeling the spectra of EM Cyg around phase {phi} < 0.5, when the white dwarf and disk are facing the observer, and we suggest that the discrepancy between the present analysis and previous spectral analysis might be due to the occulting effect of the stream veiling the white

  6. Linear array implementation of the EM algorithm for PET image reconstruction

    SciTech Connect

    Rajan, K.; Patnaik, L.M.; Ramakrishna, J.

    1995-08-01

    The PET image reconstruction based on the EM algorithm has several attractive advantages over the conventional convolution back projection algorithms. However, the PET image reconstruction based on the EM algorithm is computationally burdensome for today`s single processor systems. In addition, a large memory is required for the storage of the image, projection data, and the probability matrix. Since the computations are easily divided into tasks executable in parallel, multiprocessor configurations are the ideal choice for fast execution of the EM algorithms. In tis study, the authors attempt to overcome these two problems by parallelizing the EM algorithm on a multiprocessor systems. The parallel EM algorithm on a linear array topology using the commercially available fast floating point digital signal processor (DSP) chips as the processing elements (PE`s) has been implemented. The performance of the EM algorithm on a 386/387 machine, IBM 6000 RISC workstation, and on the linear array system is discussed and compared. The results show that the computational speed performance of a linear array using 8 DSP chips as PE`s executing the EM image reconstruction algorithm is about 15.5 times better than that of the IBM 6000 RISC workstation. The novelty of the scheme is its simplicity. The linear array topology is expandable with a larger number of PE`s. The architecture is not dependant on the DSP chip chosen, and the substitution of the latest DSP chip is straightforward and could yield better speed performance.

  7. Imaging protein three-dimensional nanocrystals with cryo-EM.

    PubMed

    Nederlof, Igor; Li, Yao Wang; van Heel, Marin; Abrahams, Jan Pieter

    2013-05-01

    Flash-cooled three-dimensional crystals of the small protein lysozyme with a thickness of the order of 100 nm were imaged by 300 kV cryo-EM on a Falcon direct electron detector. The images were taken close to focus and to the eye appeared devoid of contrast. Fourier transforms of the images revealed the reciprocal lattice up to 3 Å resolution in favourable cases and up to 4 Å resolution for about half the crystals. The reciprocal-lattice spots showed structure, indicating that the ordering of the crystals was not uniform. Data processing revealed details at higher than 2 Å resolution and indicated the presence of multiple mosaic blocks within the crystal which could be separately processed. The prospects for full three-dimensional structure determination by electron imaging of protein three-dimensional nanocrystals are discussed.

  8. Telescópio de patrulhamento solar em 12 GHz

    NASA Astrophysics Data System (ADS)

    Utsumi, F.; Costa, J. E. R.

    2003-08-01

    O telescópio de patrulhamento solar é um instrumento dedicado à observação de explosões solares com início de suas operações em janeiro de 2002, trabalhando próximo ao pico de emissão do espectro girossincrotrônico (12 GHz). Trata-se de um arranjo de três antenas concebido para a detecção de explosões e determinação em tempo real da localização da região emissora. Porém, desde sua implementação em uma montagem equatorial movimentada por um sistema de rotação constante (15 graus/hora) o rastreio apresentou pequenas variações de velocidade e folgas nas caixas de engrenagens. Assim, tornou-se necessária a construção de um sistema de correção automática do apontamento que era de fundamental importância para os objetivos do projeto. No segundo semestre de 2002 empreendemos uma série de tarefas com o objetivo de automatizar completamente o rastreio, a calibração, a aquisição de dados, controle de ganhos, offsets e transferência dos dados pela internet através de um projeto custeado pela FAPESP. O rastreio automático é realizado através de um inversor que controla a freqüência da rede de alimentação do motor de rastreio podendo fazer micro-correções na direção leste-oeste conforme os radiômetros desta direção detectem uma variação relativa do sinal. Foi adicionado também um motor na direção da declinação para correção automática da variação da direção norte-sul. Após a implementação deste sistema a precisão do rastreio melhorou para um desvio máximo de 30 segundos de arco, o que está muito bom para este projeto. O Telescópio se encontra em funcionamento automático desde março de 2003 e já conta com várias explosões observadas após a conclusão desta fase de automação. Estamos apresentando as explosões mais intensas do período e com as suas respectivas posições no disco solar.

  9. Balloting motion of SLEKE launch packages in EM railguns

    NASA Astrophysics Data System (ADS)

    Chu, Szu H.

    1993-01-01

    This paper reports some balloting motion computational results of the SLEKE (Sabot Launched Electric-gun Kinetic Energy) launch packages, which are in their early stage of development. The computation model considers the effects of the EM (Lorentz) propulsion force, friction, air resistance, gravity, elastic forces, and clearance between the launch package and the barrel. The axial, normal and yaw displacement, velocity and acceleration; friction; deformations and forces at the interfacing points are computed. The results of this study indicate that the balloting force for SLEKE launch packages is on the order of the air drag force and that a uniformly distributed power source would be more desirable than sharp pulse current for electromagnetic railguns.

  10. EM Properties of Magnetic Minerals at RADAR Frequencies

    NASA Technical Reports Server (NTRS)

    Stillman, D. E.; Olhoeft, G. R.

    2005-01-01

    Previous missions to Mars have revealed that Mars surface is magnetic at DC frequency. Does this highly magnetic surface layer attenuate RADAR energy as it does in certain locations on Earth? It has been suggested that the active magnetic mineral on Mars is titanomaghemite and/or titanomagnetite. When titanium is incorporated into a maghemite or magnetite crystal, the Curie temperature can be significantly reduced. Mars has a wide range of daily temperature fluctuations (303K - 143K), which could allow for daily passes through the Curie temperature. Hence, the global dust layer on Mars could experience widely varying magnetic properties as a function of temperature, more specifically being ferromagnetic at night and paramagnetic during the day. Measurements of EM properties of magnetic minerals were made versus frequency and temperature (300K- 180K). Magnetic minerals and Martian analog samples were gathered from a number of different locations on Earth.

  11. Detection of karst structures using airborne EM and VLF

    SciTech Connect

    Beard, L.P. Nyquist, J.E.; Carpenter, P.J.

    1994-12-31

    Through the combined use of multi-frequency helicopter electromagnetic and VLF data, it is possible to detect and delineate a wide variety of karst structures and possibly to assess their interconnectedness. Multi-frequency EM Can detect karst features if some element of the structure is conductive. This conductive aspect may derive from thick, moist soils in the depression commonly associated with a doline, from conductive fluids in the cavity, or from conductive sediments in the cavity if these occupy a significant portion of it. Multiple loop configurations may also increase the likelihood of detecting karst features. Preliminary evidence indicates total field VLF measurements may be able to detect interconnected karst pathways, so long as the pathways are water or sediment filled. Neither technique can effectively detect dry, resistive air-filled cavities.

  12. EM Structure-Based Accelerators Working Group Summary

    NASA Astrophysics Data System (ADS)

    Kimura, W. D.; Lidia, S. M.

    2004-12-01

    This Working Group (WG) focused on EM Structure-Based Accelerators, which covers a broad area of mechanisms and experiments. Topics covered included dielectric wakefield accelerators (DWA), photonic bandgap accelerators (PBGA), inverse free electron lasers (IFEL), vacuum laser accelerators (VLA), other novel schemes, and supporting analysis and modeling. In addition, this WG was tasked at the Workshop with developing conceptual (strawman) designs for a 1-GeV accelerator system based upon any of the experimentally-proven approaches covered in this WG. Two strawmen designs were developed based upon IFELs and DWAs. The presentations given and strawmen designs indicate great progress has been made in many areas. Proof-of-principle experiments will occur shortly in PBGA and VLA. Other well-proven devices, such as IFELs, are becoming accepted as "workhorse" providers of microbunches.

  13. GW astronomy, EM observations, and the interactions between them

    NASA Astrophysics Data System (ADS)

    Essick, Reed; LIGO-Virgo Collaboration

    2017-01-01

    I present an overview of the types of low latency searches operated by the LIGO-Virgo collaboration, focusing on the products produced by each and how they tie into the broader astronomical community. This includes both automated and manual follow-up to characterize the source localization as well as statements about the data quality surrounding the candidate. In broad strokes, I'll also describe the internal and external communication mechanisms put in place to announce candidates and report follow-up activities, with particular emphasis placed on how GW and EM data are mutually beneficial. Time permitting, I will also describe some consequences of observed diurnal cycles governing when the LIGO detectors are likely to record data and studies comparing localizations from different algorithms.

  14. Making connections. Voice and data solutions for EMS.

    PubMed

    Careless, James; Erich, John

    2008-08-01

    Communications used to be so simple-1) grab the radio, 2) push and talk. Now we're besieged by a confusing assortment of technology and terms-wideband, broadband, VoIP, RoIP, ect.- and a constand thrumming imperative to achieve and improve and perfect some mystical state of full interoperability. Frankly, it can all be a bit much. With this supplement, we hope to clarify you options. We examine the importance of broadband for EMS, with its potential for larger data "pipes" between the hospital and the field; advances in the promising technologies of Voice over IP and Radio over IP; and how some systems are improving their interconnectedness and resulting operations. The jargon can be overwhelming, but the ideas are worth understanding.

  15. Speech articulator measurements using low power EM-wave sensors

    SciTech Connect

    Holzrichter, J.F.; Burnett, G.C.; Ng, L.C.; Lea, W.A.

    1998-01-01

    Very low power electromagnetic (EM) wave sensors are being used to measure speech articulator motions as speech is produced. Glottal tissue oscillations, jaw, tongue, soft palate, and other organs have been measured. Previously, microwave imaging (e.g., using radar sensors) appears not to have been considered for such monitoring. Glottal tissue movements detected by radar sensors correlate well with those obtained by established laboratory techniques, and have been used to estimate a voiced excitation function for speech processing applications. The noninvasive access, coupled with the small size, low power, and high resolution of these new sensors, permit promising research and development applications in speech production, communication disorders, speech recognition and related topics. {copyright} {ital 1998 Acoustical Society of America.}

  16. EM modeling of RF drive in DTL tank 4

    SciTech Connect

    Kurennoy, Sergey S.

    2012-06-19

    A 3-D MicroWave Studio model for the RF drive in the LANSCE DTL tank 4 has been built. Both eigensolver and time-domain modeling are used to evaluate maximal fields in the drive module and RF coupling. The LANSCE DTL tank 4 has recently been experiencing RF problems, which may or may not be related to its replaced RF coupler. This situation stimulated a request by Dan Rees to provide EM modeling of the RF drive in the DTL tank 4 (T4). Jim O'Hara provided a CAD model that was imported into the CST Microwave Studio (MWS) and after some modifications became a part of a simplified MWS model of the T4 RF drive. This technical note describes the model and presents simulation results.

  17. Integrated EM & Thermal Simulations with Upgraded VORPAL Software

    SciTech Connect

    D.N. Smithe, D. Karipides, P. Stoltz, G. Cheng, H. Wang

    2011-03-01

    Nuclear physics accelerators are powered by microwaves which must travel in waveguides between room-temperature sources and the cryogenic accelerator structures. The ohmic heat load from the microwaves is affected by the temperature-dependent surface resistance and in turn affects the cryogenic thermal conduction problem. Integrated EM & thermal analysis of this difficult non-linear problem is now possible with the VORPAL finite-difference time-domain simulation tool. We highlight thermal benchmarking work with a complex HOM feed-through geometry, done in collaboration with researchers at the Thomas Jefferson National Accelerator Laboratory, and discuss upcoming design studies with this emerging tool. This work is part of an effort to generalize the VORPAL framework to include generalized PDE capabilities, for wider multi-physics capabilities in the accelerator, vacuum electronics, plasma processing and fusion R&D fields, and we will also discuss user interface and algorithmic upgrades which facilitate this emerging multiphysics capability.

  18. Suspended-Patch Antenna With Inverted, EM-Coupled Feed

    NASA Technical Reports Server (NTRS)

    Simons, Rainee N.

    2004-01-01

    An improved suspended-patch antenna has been designed to operate at a frequency of about 23 GHz with linear polarization and to be one of four identical antennas in a rectangular array. The antenna includes a parasitic patch on top of a suspended dielectric superstrate, an active patch on top of a suspended dielectric substrate, a microstrip on the bottom of the dielectric substrate, and a ground plane. The microstrip, the ground plane, the airgap between them, and the dielectric substrate together constitute a transmission line that has an impedance of 50 Ohm and is electromagnetically (EM) coupled to the active patch. The parasitic patch is, in turn, excited by the active patch. The microstrip feed is characterized as inverted because the microstrip is on the bottom of the substrate, whereas microstrips are usually placed on the tops of dielectric substrates

  19. Updated bathymetric survey of Kick-'em-Jenny submarine volcano

    NASA Astrophysics Data System (ADS)

    Watlington, R. A.; Wilson, W. D.; Johns, W. E.; Nelson, C.

    High-resolution bathymetric data obtained in July 1996 during a survey of the Kick-'em-Jenny submarine volcano north of Grenada in the Lesser Antilles revealed changes in the structure of the volcanic edifice compared to previously available surveys. The volcano's summit, at 178 m below sea level, was found to be approximately 18 m farther from the surface than was reported by Bouysse et al. (1988) and others. No dome was observed. Instead, an open crater, surrounded by walls that dropped significantly in elevation from one side to the opposite, suggest that eruptions, earthquakes, rockfalls or explosions may have altered the structure since the last detailed survey. The deepest contour of the volcano's crater was found 106 m below the summit.

  20. Elevated ethyl methanesulfonate (EMS) in nelfinavir mesylate (Viracept®, Roche): overview

    PubMed Central

    Pozniak, Anton; Müller, Lutz; Salgo, Miklos; Jones, Judith K; Larson, Peter; Tweats, David

    2009-01-01

    Roche's protease inhibitor nelfinavir mesylate (Viracept®) produced between March 2007-June 2007 was found to contain elevated levels of ethyl methanesulfonate (EMS), a known mutagen (alkylator) – leading to a global recall of the drug. EMS levels in a daily dose (2,500 mg Viracept/day) were predicted not to exceed a dose of ~2.75 mg/day (~0.055 mg/kg/day based on 50 kg patient). As existing toxicology data on EMS did not permit an adequate patient risk assessment, a comprehensive animal toxicology evaluation of EMS was conducted. General toxicity of EMS was investigated in rats over 28 days. Two studies for DNA damage were performed in mice; chromosomal damage was assessed using a micronucleus assay and gene mutations were detected using the MutaMouse transgenic model. In addition, experiments designed to extrapolate animal exposure to humans were undertaken. A general toxicity study showed that the toxicity of EMS occurred only at doses ≥ 60 mg/kg/day, which is far above that received by patients. Studies for chromosomal damage and mutations in mice demonstrated a clear threshold effect with EMS at 25 mg/kg/day, under chronic dosing conditions. Exposure analysis (Cmax) demonstrated that ~370-fold higher levels of EMS than that ingested by patients, are needed to saturate known, highly conserved, error-free, mammalian DNA repair mechanisms for alkylation. In summary, animal studies suggested that patients who took nelfinavir mesylate with elevated levels of EMS are at no increased risk for carcinogenicity or teratogenicity over their background risk, since mutations are prerequisites for such downstream events. These findings are potentially relevant to >40 marketed drugs that are mesylate salts. PMID:19660105

  1. DOE-EM-45 PACKAGING OPERATIONS AND MAINTENANCE COURSE

    SciTech Connect

    Watkins, R.; England, J.

    2010-05-28

    Savannah River National Laboratory - Savannah River Packaging Technology (SRNL-SRPT) delivered the inaugural offering of the Packaging Operations and Maintenance Course for DOE-EM-45's Packaging Certification Program (PCP) at the University of South Carolina Aiken on September 1 and 2, 2009. Twenty-nine students registered, attended, and completed this training. The DOE-EM-45 Packaging Certification Program (PCP) sponsored the presentation of a new training course, Packaging Maintenance and Operations, on September 1-2, 2009 at the University of South Carolina Aiken (USC-Aiken) campus in Aiken, SC. The premier offering of the course was developed and presented by the Savannah River National Laboratory, and attended by twenty-nine students across the DOE, NNSA and private industry. This training informed package users of the requirements associated with handling shipping containers at a facility (user) level and provided a basic overview of the requirements typically outlined in Safety Analysis Report for Packaging (SARP) Chapters 1, 7, and 8. The course taught packaging personnel about the regulatory nature of SARPs to help reduce associated and often costly packaging errors. Some of the topics covered were package contents, loading, unloading, storage, torque requirements, maintaining records, how to handle abnormal conditions, lessons learned, leakage testing (including demonstration), and replacement parts. The target audience for this course was facility operations personnel, facility maintenance personnel, and field quality assurance personnel who are directly involved in the handling of shipping containers. The training also aimed at writers of SARP Chapters 1, 7, and 8, package designers, and anyone else involved in radioactive material packaging and transportation safety. Student feedback and critiques of the training were very positive. SRNL will offer the course again at USC Aiken in September 2010.

  2. Risk factors for hypothermia in EMS-treated burn patients.

    PubMed

    Weaver, Matthew D; Rittenberger, Jon C; Patterson, P Daniel; McEntire, Serina J; Corcos, Alain C; Ziembicki, Jenny A; Hostler, David

    2014-01-01

    Hypothermia has been associated with increased mortality in burn patients. We sought to characterize the body temperature of burn patients transported directly to a burn center by emergency medical services (EMS) personnel and identify the factors independently associated with hypothermia. We utilized prospective data collected by a statewide trauma registry to carry out a nested case-control study of burn patients transported by EMS directly to an accredited burn center between 2000 and 2011. Temperature at hospital admission ≤36.5°C was defined as hypothermia. We utilized registry data abstracted from prehospital care reports and hospital records in building a multivariable regression model to identify the factors associated with hypothermia. Forty-two percent of the sample was hypothermic. Burns of 20-39% total body surface area (TBSA) (OR 1.44; 1.17-1.79) and ≥40% TBSA (OR 2.39; 1.57-3.64) were associated with hypothermia. Hypothermia was also associated with age > 60 (OR 1.50; 1.30-1.74), polytrauma (OR 1.58; 1.19-2.09), prehospital Glasgow Coma Scale <8 (OR 2.01; 1.46-2.78), and extrication (OR 1.49; 1.30-1.71). Hypothermia was also more common in the winter months (OR 1.54; 1.33-1.79) and less prevalent in patients weighing over 90 kg (OR 0.63; 0.46-0.88). A substantial proportion of burn patients demonstrate hypothermia at hospital arrival. Risk factors for hypothermia are readily identifiable by prehospital providers. Maintenance of normothermia should be stressed during prehospital care.

  3. Effects of integrated use of organic and inorganic nutrient sources with effective microorganisms (EM) on seed cotton yield in Pakistan.

    PubMed

    Khaliq, Abdul; Abbasi, M Kaleem; Hussain, Tahir

    2006-05-01

    A field experiment was conducted to determine the effects of integrated use of organic and inorganic nutrient sources with effective microorganisms on growth and yield of cotton. Treatments included: control; organic materials (OM); effective microorganisms (EM); OM+EM; mineral NPK (170:85:60 kg); 1/2 mineral NPK+EM; 1/2 mineral NPK+OM+EM and mineral NPK+OM+EM. OM and EM alone did not increase the yield and yield attributing components significantly but integrated use of both resulted in a 44% increase over control. Application of NPK in combination with OM and EM resulted in the highest seed cotton yield (2470 kg ha-1). Integrated use of OM+EM with 1/2 mineral NPK yielded 2091 kg ha-1, similar to the yield (2165 kg ha-1) obtained from full recommended NPK, indicating that this combination can substitute for 85 kg N ha-1. Combination of both N sources with EM also increased the concentrations of NPK in plants. Economic analysis suggested the use of 1/2 mineral NPK with EM+OM saves the mineral N fertilizer by almost 50% compared to a system with only mineral NPK application. This study indicated that application of EM increased the efficiency of both organic and mineral nutrient sources but alone was ineffective in increasing yield.

  4. EMS Provider Assessment of Vehicle Damage Compared to a Professional Crash Reconstructionist

    PubMed Central

    Lerner, E. Brooke; Cushman, Jeremy T.; Blatt, Alan; Lawrence, Richard; Shah, Manish N.; Swor, Robert; Brasel, Karen; Jurkovich, Gregory J.

    2011-01-01

    Objective To determine the accuracy of EMS provider assessments of motor vehicle damage, when compared to measurements made by a professional crash reconstructionist. Methods EMS providers caring for adult patients injured during a motor vehicle crash and transported to the regional trauma center in a midsized community were interviewed upon ED arrival. The interview collected provider estimates of crash mechanism of injury. For crashes that met a preset severity threshold, the vehicle’s owner was asked to consent to having a crash reconstructionist assess their vehicle. The assessment included measuring intrusion and external auto deformity. Vehicle damage was used to calculate change in velocity. Paired t-test and correlation were used to compare EMS estimates and investigator derived values. Results 91 vehicles were enrolled; of these 58 were inspected and 33 were excluded because the vehicle was not accessible. 6 vehicles had multiple patients. Therefore, a total of 68 EMS estimates were compared to the inspection findings. Patients were 46% male, 28% admitted to hospital, and 1% died. Mean EMS estimated deformity was 18” and mean measured was 14”. Mean EMS estimated intrusion was 5” and mean measured was 4”. EMS providers and the reconstructionist had 67% agreement for determination of external auto deformity (kappa 0.26), and 88% agreement for determination of intrusion (kappa 0.27) when the 1999 Field Triage Decision Scheme Criteria were applied. Mean EMS estimated speed prior to the crash was 48 mph±13 and mean reconstructionist estimated change in velocity was 18 mph±12 (correlation -0.45). EMS determined that 19 vehicles had rolled over while the investigator identified 18 (kappa 0.96). In 55 cases EMS and the investigator agreed on seatbelt use, for the remaining 13 cases there was disagreement (5) or the investigator was unable to make a determination (8) (kappa 0.40). Conclusions This study found that EMS providers are good at estimating

  5. Time-Lapse inversion of EM Tomography data for polymer-injected hydrocarbon reservoirs

    NASA Astrophysics Data System (ADS)

    Cheon, Seiwook; Park, Chanho; Nam, Myung Jin; Son, Jeong-Sul

    2015-04-01

    Polymer flooding is a method to increase the production of hydrocarbon reservoir by injecting polymer solution into the reservoir. For a study on the monitoring fluid variation within the reservoir, we first make analysis on seismic- and electromagnetic (EM)- tomography responses for seismic and electrical-resistivity rock physics models (RPMs) of the reservoir considering polymer fluid. Constructing RPMs are dependent on not only geologic characteristics of reservoir but also reservoir parameters such as fluid-type, fluid saturation, pressure and temperature. When making RPM for monitoring analysis, we assume the geology does not changes while reservoir parameters change to affect responses of seismic and EM tomography data. Specifically when constructing electrical-resistivity RPM, we consider three different types of hydrocarbon reservoirs, which are clean sand, shaly sand, sand-shale lamination, while considering two different types of waters (fresh water and salt water) to make 2wt% polymer solution. To compute time lapse EM and seismic tomography responses for corresponding RPMs of polymer-injected reservoirs, we used 2.5D finite element EM modeling algorithm and staggered-grid finite difference elastic modeling algorithm, respectively. Comparison between sensitivities of seismic and EM tomography to polymer injection confirms that EM tomography is more sensitivity to the polymer injection. For the evaluation of the potential of EM tomography to monitor polymer flooding, this study subsequently develops an efficient time-lapse EM tomography inversion algorithm based on the 2.5D EM tomography modeling. Using the inversion algorithm, we inverted the time-lapse EM tomography data to construct true resistivity models of polymer-injected reservoirs and analyze differences between them. From the time-lapse inversion results, we can observe the differences in time lapse responses between using fresh water and salt water have been decreased in the inverted time

  6. DNA-ligase activities appear normal in the CHO mutant EM9.

    PubMed

    Chan, J Y; Thompson, L H; Becker, F F

    1984-01-01

    The Chinese hamster ovary (CHO) mutant strain EM9 was previously shown to be hypersensitive to killing by ethyl methanesulfonate (EMS) and methyl methanesulfonate (MMS), to have a 12-fold increased baseline incidence of sister-chromatid exchanges (SCE), and to be defective in rejoining DNA strand breaks after treatment with EMS, MMS, or X-rays. A study was performed to determine if the primary biochemical defect might be a DNA ligase. DNA-ligase activities were assayed and compared after separation of the multiple forms of ligase by AcA 34 gel-filtration chromatography of total cellular extracts. In EM9 cells the levels of the presumptive replicative forms, DNA ligase Ia (480 kd) and ligase Ib (240 kd) were about 50% and 60%, respectively, of those in the parental AA8 cells, whereas DNA ligase II (80 kd) was unaltered in EM9 . In a phenotypic revertant line ( 9R1 ) ligases Ia, Ib and II levels were 35%, 37% and 100%, respectively, of those in AA8 . The reduced levels of ligases Ia and Ib in EM9 and 9R1 cells are apparently not related directly to the mutant phenotype and may be attributable to the somewhat slower growth rates of these strains compared with those of AA8 . To determine if the repair defect in EM9 might reside in the ability to induce DNA-ligase activity after treatment with a DNA-damaging agent, AA8 and EM9 cells were treated with MMS at 30 micrograms/ml for 60 min before preparing fractions for ligase assays. Under these conditions the activities of ligases Ia and Ib decreases 70-80% in both cell lines, but ligase II increased 2.0- and 2.6-fold, respectively, in AA8 and EM9 . As a further test of defective ligase activities in EM9 , assays were performed in the presence of 0.1 M NaCl or after heating the fractions for 10 min at 50 degrees C. Although all 3 forms of ligase showed altered activity under both of these conditions, there were no significant differences between EM9 and AA8 cells. These data combined with the above results provide strong

  7. Quantitative performance evaluation of the EM algorithm applied to radiographic images

    NASA Astrophysics Data System (ADS)

    Brailean, James C.; Giger, Maryellen L.; Chen, Chin-Tu; Sullivan, Barry J.

    1991-07-01

    In this study, the authors evaluate quantitatively the performance of the Expectation Maximization (EM) algorithm as a restoration technique for radiographic images. The 'perceived' signal-to-nose ratio (SNR), of simple radiographic patterns processed by the EM algorithm are calculated on the basis of a statistical decision theory model that includes both the observer's visual response function and a noise component internal to the eye-brain system. The relative SNR (ratio of the processed SNR to the original SNR) is calculated and used as a metric to quantitatively compare the effects of the EM algorithm to two popular image enhancement techniques: contrast enhancement (windowing) and unsharp mask filtering.

  8. Investigating the source of contaminated plumes downstream of the Alborz Sharghi coal washing plant using EM34 conductivity data, VLF-EM and DC-resistivity geophysical methods

    NASA Astrophysics Data System (ADS)

    Shiraz, Farzin Amirkhani; Ardejani, Faramarz Doulati; Moradzadeh, Ali; Arab-Amiri, Ali Reza

    2013-01-01

    Coal washing factories may create serious environmental problems due to pyrite oxidation and acid mine drainage generation from coal waste piles on nearby land. Infiltration of pyrite oxidation products through the porous materials of the coal waste pile by rainwater cause changes in the conductivity of underground materials and groundwater downstream of the pile. Electromagnetic and electrical methods are effective for investigation and monitoring of the contaminated plumes caused by coal waste piles and tailings impoundments. In order to investigate the environmental impact from a coal waste pile at the Alborz Sharghi coal washing plant, an EM34 ground conductivity meter was used on seven parallel lines in an E-W direction, downstream of the waste pile. Two-dimensional resistivity models obtained by the inversion of EM34 conductivity data identified conductive leachate plumes. In addition, quasi-3D inversion of EM34 data has confirmed the decreasing resistivity at depth due to the contaminated plumes. Comparison between EM34, VLF and DC-resistivity datasets, which were acquired for similar survey lines, agree well in identifying changes in the resistivity trend. The EM34 and DC-resistivity sections have greater similarity and better smoothness rather than those of the VLF model. Two-dimensional inversion models of these methods have shown some contaminated plumes with low resistivity.

  9. Simulating Suspended Silt Concentrations in the Ems Estuary, The Netherlands

    NASA Astrophysics Data System (ADS)

    Grasmeijer, B. T.

    2009-04-01

    1 Introduction The Ems Estuary is situated in the North-east Netherlands on the border with Germany. Its area, including the tidal river and excluding the outer delta, is ± 500 km2. The area of the outer delta is ± 100 km2. The length of the estuary from the inlet to the town of Leer in Germany is approximately 75 km. The mean tidal range varies over years (de Jonge, 1992), but is approximately 2.3 m near the island of Borkum (tidal inlet) and approximately 3.2 m near the town of Emden in Germany. The estuary receives water from the rain-fed River Ems (approximately 115 m3/s on average). A second much smaller freshwater input emanates from the small canalized river Westerwoldsche Aa (12.5 m3/s on average). These discharges vary strongly within and between years. The result of the interaction between freshwater discharge and seawater brought in by the tide is a salinity gradient, the length and position of which is strongly dependent on the water discharge by the rivers. The present morphology of the estuary is the result of natural processes such as tidal currents, wind and wave driven currents and river discharge, resulting in sediment trans-port and sedimentation and erosion patterns. These natural processes are affected by human interferences like maintenance dredging of the navigation channels, land reclamation, building of dikes, etc. The greatest changes in the last 50 years in the physical functioning of the Ems estuary have been the increased sea level and tidal range, the increased amplitude and frequency of storm surge, and greatly increased turbidity and sediment concentrations (particularly near the estuarine turbidity maximum). Much of the changes can be traced directly or indirectly to anthropogenic influence. 2 Aim and approach We studied the hydrodynamics and morphodynamics of the Ems estuary. One of the aims was to gain more insight in the behaviour of the suspended silt concentrations in the estuary and the anthropogenic influence thereon. We

  10. Factors that Influence the Formation and Stability of Thin, Cryo-EM Specimens

    PubMed Central

    Glaeser, Robert M.; Han, Bong-Gyoon; Csencsits, Roseann; Killilea, Alison; Pulk, Arto; Cate, Jamie H.D.

    2016-01-01

    Poor consistency of the ice thickness from one area of a cryo-electron microscope (cryo-EM) specimen grid to another, from one grid to the next, and from one type of specimen to another, motivates a reconsideration of how to best prepare suitably thin specimens. Here we first review the three related topics of wetting, thinning, and stability against dewetting of aqueous films spread over a hydrophilic substrate. We then suggest that the importance of there being a surfactant monolayer at the air-water interface of thin, cryo-EM specimens has been largely underappreciated. In fact, a surfactant layer (of uncontrolled composition and surface pressure) can hardly be avoided during standard cryo-EM specimen preparation. We thus suggest that better control over the composition and properties of the surfactant layer may result in more reliable production of cryo-EM specimens with the desired thickness. PMID:26386606

  11. cryoSPARC: algorithms for rapid unsupervised cryo-EM structure determination.

    PubMed

    Punjani, Ali; Rubinstein, John L; Fleet, David J; Brubaker, Marcus A

    2017-03-01

    Single-particle electron cryomicroscopy (cryo-EM) is a powerful method for determining the structures of biological macromolecules. With automated microscopes, cryo-EM data can often be obtained in a few days. However, processing cryo-EM image data to reveal heterogeneity in the protein structure and to refine 3D maps to high resolution frequently becomes a severe bottleneck, requiring expert intervention, prior structural knowledge, and weeks of calculations on expensive computer clusters. Here we show that stochastic gradient descent (SGD) and branch-and-bound maximum likelihood optimization algorithms permit the major steps in cryo-EM structure determination to be performed in hours or minutes on an inexpensive desktop computer. Furthermore, SGD with Bayesian marginalization allows ab initio 3D classification, enabling automated analysis and discovery of unexpected structures without bias from a reference map. These algorithms are combined in a user-friendly computer program named cryoSPARC (http://www.cryosparc.com).

  12. Analysis of the electrochemistry of hemes with Ems spanning 800 mV

    PubMed Central

    Zheng, Zhong; Gunner, M. R.

    2009-01-01

    The free energy of heme reduction in different proteins is found to vary over more than 18 kcal/mol. It is a challenge to determine how proteins manage to achieve this enormous range of Ems with a single type of redox cofactor. Proteins containing 141 unique hemes of a-, b-, and c-type, with bis-His, His-Met, and aquo-His ligation were calculated using Multi-Conformation Continuum Electrostatics (MCCE). The experimental Ems range over 800 mV from −350 mV in cytochrome c3 to 450 mV in cytochrome c peroxidase (vs. SHE). The quantitative analysis of the factors that modulate heme electrochemistry includes the interactions of the heme with its ligands, the solvent, the protein backbone, and sidechains. MCCE calculated Ems are in good agreement with measured values. Using no free parameters the slope of the line comparing calculated and experimental Ems is 0.73 (R2 = 0.90), showing the method accounts for 73% of the observed Em range. Adding a +160 mV correction to the His-Met c-type hemes yields a slope of 0.97 (R2 = 0.93). With the correction 65% of the hemes have an absolute error smaller than 60 mV and 92% are within 120 mV. The overview of heme proteins with known structures and Ems shows both the lowest and highest potential hemes are c-type, whereas the b-type hemes are found in the middle Em range. In solution, bis-His ligation lowers the Em by ≈205 mV relative to hemes with His-Met ligands. The bis-His, aquo-His, and His-Met ligated b-type hemes all cluster about Ems which are ≈200 mV more positive in protein than in water. In contrast, the low potential bis-His c-type hemes are shifted little from in solution, whereas the high potential His-Met c-type hemes are raised by ≈300 mV from solution. The analysis shows that no single type of interaction can be identified as the most important in setting heme electrochemistry in proteins. For example, the loss of solvation (reaction field) energy, which raises the Em, has been suggested to be a major factor in

  13. 7. PHOTOCOPY, ELEVATIONS FOR E.M. BARRACKS, N.C.O. AND OFFICERS QUARTERS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. PHOTOCOPY, ELEVATIONS FOR E.M. BARRACKS, N.C.O. AND OFFICERS QUARTERS. - NIKE Missile Base SL-40, Barracks No. 1, North end of base, southest of Basketball Court & northwest of Barracks No. 2, Hecker, Monroe County, IL

  14. Design of Microstrip Lange Coupler Based on Em-Ann Model

    NASA Astrophysics Data System (ADS)

    Yang, Ziqiang; Yang, Tao; Liu, Yu

    2006-10-01

    Electromagnetically trained artificial neural network (EM-ANN) model for microstrip Lange Coupler is presented. Full-wave EM analysis software is employed to characterize the Lange Coupler. The EM-ANN model is then designed using physical parameters as inputs and S-parameters as outputs. Once the EM-ANN model is trained, it can be used to find the optimal physical structure of the Lange Coupler for a given application using optimization technique. A Ka-band microstrip Lange Coupler is designed by this method. The simulated results of the Lange Coupler show that the insert loss is better than -3.64 dB; the amplitude balance is less than 0.55 dB and the phase balance is less than 0.52°from the 90°phase difference over the 30 to 40 GHz frequency range.

  15. 3D parallel inversion of time-domain airborne EM data

    NASA Astrophysics Data System (ADS)

    Liu, Yun-He; Yin, Chang-Chun; Ren, Xiu-Yan; Qiu, Chang-Kai

    2016-12-01

    To improve the inversion accuracy of time-domain airborne electromagnetic data, we propose a parallel 3D inversion algorithm for airborne EM data based on the direct Gauss-Newton optimization. Forward modeling is performed in the frequency domain based on the scattered secondary electrical field. Then, the inverse Fourier transform and convolution of the transmitting waveform are used to calculate the EM responses and the sensitivity matrix in the time domain for arbitrary transmitting waves. To optimize the computational time and memory requirements, we use the EM "footprint" concept to reduce the model size and obtain the sparse sensitivity matrix. To improve the 3D inversion, we use the OpenMP library and parallel computing. We test the proposed 3D parallel inversion code using two synthetic datasets and a field dataset. The time-domain airborne EM inversion results suggest that the proposed algorithm is effective, efficient, and practical.

  16. Factors that Influence the Formation and Stability of Thin, Cryo-EM Specimens

    DOE PAGES

    Glaeser, Robert M.; Han, Bong-Gyoon; Csencsits, Roseann; ...

    2015-09-17

    Poor consistency of the ice thickness from one area of a cryo-electron microscope (cryo-EM) specimen grid to another, from one grid to the next, and from one type of specimen to another, motivates a reconsideration of how to best prepare suitably thin specimens. We first review the three related topics of wetting, thinning, and stability against dewetting of aqueous films spread over a hydrophilic substrate. Furthermore, we then suggest that the importance of there being a surfactant monolayer at the air-water interface of thin, cryo-EM specimens has been largely underappreciated. In fact, a surfactant layer (of uncontrolled composition and surfacemore » pressure) can hardly be avoided during standard cryo-EM specimen preparation. Thus it is suggested that better control over the composition and properties of the surfactant layer may result in more reliable production of cryo-EM specimens with the desired thickness.« less

  17. Factors that Influence the Formation and Stability of Thin, Cryo-EM Specimens

    SciTech Connect

    Glaeser, Robert M.; Han, Bong-Gyoon; Csencsits, Roseann; Killilea, Alison; Pulk, Arto; Cate, Jamie H. D.

    2015-09-17

    Poor consistency of the ice thickness from one area of a cryo-electron microscope (cryo-EM) specimen grid to another, from one grid to the next, and from one type of specimen to another, motivates a reconsideration of how to best prepare suitably thin specimens. We first review the three related topics of wetting, thinning, and stability against dewetting of aqueous films spread over a hydrophilic substrate. Furthermore, we then suggest that the importance of there being a surfactant monolayer at the air-water interface of thin, cryo-EM specimens has been largely underappreciated. In fact, a surfactant layer (of uncontrolled composition and surface pressure) can hardly be avoided during standard cryo-EM specimen preparation. Thus it is suggested that better control over the composition and properties of the surfactant layer may result in more reliable production of cryo-EM specimens with the desired thickness.

  18. Aquisição de Estreptococos Mutans e Desenvolvimento de Cárie Dental em Primogênitos

    PubMed Central

    NOCE, Erica; RUBIRA, Cassia Maria Fischer; da Silva ROSA, Odila Pereira; da SILVA, Salete Moura Bonifácio; BRETZ, Walter Antonio

    2011-01-01

    Objetivo Avaliar o momento de aquisição de estreptococos mutans (EM), desenvolvimento de cárie dental e as variáveis a eles associadas no decorrer de 23 meses, em primogênitos de famílias de baixo nível socioeconômico, desde os sete meses de idade. Método A amostra foi selecionada com base em mães densamente colonizadas por EM, incluindo todos os membros de 14 famílias que conviviam na mesma casa. Foram envolvidos no estudo 14 mães, pais e primogênitos e 8 parentes, na maioria avós. Exames clínicos e radiográficos iniciais determinaram os índices de cárie e condição periodontal dos adultos. Contagens de EM foram feitas em todos os adultos nas duas primeiras visitas. Nas crianças foram avaliados os níveis de EM, o número de dentes e de cáries, em quatro visitas. Resultados A prevalência de EM nos adultos foi alta, estando ausente em apenas um dos pais. EM foram detectados em 1, 2, 3 e 10 crianças, respectivamente nas visitas #1, 2, 3 e 4. A cárie dental foi detectada em apenas três crianças na última visita (aos 30 meses de idade), as quais apresentaram escores de EM significantemente maiores que as crianças sem cárie, na mesma visita. Conclusão Exclusivamente a condição social de baixa renda e mães densamente colonizadas por EM não são sinônimo de colonização precoce e alta atividade de cárie em crianças cuidadas em casa. O desenvolvimento de cárie está significantemente associado a escores elevados de EM nas crianças. PMID:22022218

  19. Using PAs in prehospital environments to reduce ED and EMS overuse.

    PubMed

    Thompson, Katherine M; Tozier, William L

    2017-04-01

    Emergency medical services (EMS) and EDs in large cities are burdened with a significant number of patients with chronic disease who have limited options for receiving proper care. Despite their relatively small numbers, these "superusers" can have a significant effect on EMS, particularly in large cities. Additionally, EDs are not designed to provide chronic and continuous healthcare. This article describes how several organizations use physician assistants to manage these patients.

  20. Effects of Loaded Squat Exercise with and without Application of Superimposed EMS on Physical Performance.

    PubMed

    Wirtz, Nicolas; Zinner, Christoph; Doermann, Ulrike; Kleinoeder, Heinz; Mester, Joachim

    2016-03-01

    The aim of the present study was to investigate the effects of a multiple set squat exercise training intervention with superimposed electromyostimulation (EMS) on strength and power, sprint and jump performance. Twenty athletes from different disciplines participated and were divided into two groups: strength training (S) or strength training with superimposed EMS (S+E). Both groups completed the same training program twice a week over a six week period consisting of four sets of the 10 repetition maximum of back squats. Additionally, the S+E group had EMS superimposed to the squat exercise with simultaneous stimulation of leg and trunk muscles. EMS intensity was adjusted to 70% of individual pain threshold to ensure dynamic movement. Strength and power of different muscle groups, sprint, and vertical jump performance were assessed one week before (pre), one week after (post) and three weeks (re) following the training period. Both groups showed improvements in leg press strength and power, countermovement and squat jump performance and pendulum sprint (p < 0.05), with no changes for linear sprint. Differences between groups were only evident at the leg curl machine with greater improvements for the S+E group (p < 0.05). Common squat exercise training and squat exercise with superimposed EMS improves maximum strength and power, as well as jumping abilities in athletes from different disciplines. The greater improvements in strength performance of leg curl muscles caused by superimposed EMS with improvements in strength of antagonistic hamstrings in the S+E group are suggesting the potential of EMS to unloaded (antagonistic) muscle groups. Key pointsSimilar strength adaptations occurred after a 6 week 10 RM back squat exercise program with superimposed EMS (S+E) and 10 RM back squat exercise (S) alone.Specific adaptations for S+E at the leg curl muscles were evident.S and S+E improved SJ, CMJ and pendulum sprint performance.No improvement occurred in linear sprint

  1. Measuring Turbulence Mixing in Indonesian Seas Using Microstructure EM-APEX Floats

    DTIC Science & Technology

    2016-04-18

    Indonesia in the spring 2016 are being arranged. 15. SUBJECT TERMS mixing within the Banda; EM APEX fl oats; upper ocean processes; mixed layer...tech instrumentation. The Indonesian seas or maritime continent is at the nexus of key components of the ocean and climate systems, such as ENSO...has the potential to lead to larger, more elaborate field programs investigating upper ocean dynamics. EM APEX float measurements provide .details of

  2. Quantify Lateral Dispersion and Turbulent Mixing by Spatial Array of chi-EM-APEX Floats

    DTIC Science & Technology

    2012-09-30

    before being transported to the northeast, with strong south-east/north- west gradients. The other assets were moved northward immediately, causing an...experiments. REFERENCES Kunze, E., and Sanford, T. B., 1993, Submesoscale Dynamics near a Seamount . Part I: Measurements of Ertel Vorticity, American...EM-APEX Floats and Moorings (N00014-08-1-0560) as a part of the ITOP DRI. Fourteen EM-APEX floats were air-deployed into two W. Pacific typhoons

  3. Light curve analysis of beta Lyrae type binary star EM TrA

    NASA Astrophysics Data System (ADS)

    Özkardeş, B.

    2017-02-01

    An analysis of photometric observations of the eclipsing binary system EM TrA (TYC 9258-211-1=CD-67 1660) is presented in this study. The V light curve of the system from All Sky Automated Survey (ASAS) was solved using the Wilson-Devinney code. The final solution describes EM TrA as a detached system. The absolute parameters of the components of the system were estimated.

  4. Orion EM-1 Forward Skirt Move from Hangar AF to BFF

    NASA Image and Video Library

    2017-08-30

    The Exploration Mission-1 (EM-1) left-hand forward skirt for NASA's Space Launch System (SLS) solid rocket boosters arrives inside the high bay at the Booster Fabrication Facility (BFF) at NASA's Kennedy Space Center in Florida. In the BFF, the forward skirt will be inspected and prepared for use on the left-hand solid rocket booster for EM-1. NASA's Orion spacecraft will fly atop the SLS rocket on its first uncrewed flight test.

  5. Orion EM-1 Forward Skirt Move from Hangar AF to BFF

    NASA Image and Video Library

    2017-08-30

    The Exploration Mission-1 (EM-1) left-hand forward skirt for NASA's Space Launch System (SLS) solid rocket boosters arrives at the Booster Fabrication Facility (BFF) at NASA's Kennedy Space Center in Florida from Hangar AE at Cape Canaveral Air Force Station. In the BFF, the forward skirt will be inspected and prepared for use on the left-hand solid rocket booster for EM-1. NASA's Orion spacecraft will fly atop the SLS rocket on its first uncrewed flight test.

  6. Orion EM-1 Forward Skirt Move from Hangar AF to BFF

    NASA Image and Video Library

    2017-08-30

    The Exploration Mission-1 (EM-1) left-hand forward skirt for NASA's Space Launch System (SLS) solid rocket boosters arrives at the entrance to the high bay at the Booster Fabrication Facility (BFF) at NASA's Kennedy Space Center in Florida. In the BFF, the forward skirt will be inspected and prepared for use on the left-hand solid rocket booster for EM-1. NASA's Orion spacecraft will fly atop the SLS rocket on its first uncrewed flight test.

  7. Estudo comparativo entre estrelas centrais de nebulosas planetárias deficientes em hidrogênio

    NASA Astrophysics Data System (ADS)

    Marcolino, W. L. F.; de Araújo, F. X.

    2003-08-01

    Apresentamos neste trabalho o resultado de um estudo das principais características espectrais das estrelas centrais de nebulosas planetárias (ECNP) deficientes em hidrogênio. A origem e a evolução dessas estrelas ainda constitui um problema em aberto na evolução estelar. Geralmente esses objetos são divididos em [WCE], [WCL] e [WELS]. Os tipos [WCE] e [WCL] apresentam um espectro típico de uma estrela Wolf-Rayet carbonada de população I e as [WELS] apresentam linhas fracas de carbono e oxigênio em emissão. Existem evidências que apontam a seguinte sequência evolutiva : [WCL] = > [WCE] = > [WELS] = > PG 1159 (pré anã-branca). No entanto, tal cenário apresenta falhas como por exemplo a falta de ECNP entre os tipos [WCL] e [WCE]. Baseados em uma amostra de 24 objetos obtida no telescópio de 1.52m em La Silla, Chile (acordo ESO/ON), ao longo do ano 2000, apresentamos os resultados da comparação das larguras equivalentes de diversas linhas relevantes entre os tipos [WCL], [WCE] e [WELS]. Verificamos que nossos dados estão de acordo com a sequência evolutiva. Baseado nas linhas de C IV, conseguimos dividir pela primeira vez as [WELS] em dois grupos principais. Além disso, os dados reforçam a afirmação de que as [WCE] são as estrelas que possuem a maior temperatura entre as ECNP deficientes em hidrogênio. Discutimos ainda, a escassez de dados disponíveis na literatura e a necessidade da obtenção de parametros físicos para estes objetos.

  8. The Soils and Groundwater – EM-20 S&T Roadmap Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-02-11

    The Soils and Groundwater – EM-20 Science and Technology Roadmap Project is a U.S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies and technology for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by EM-20 Roadmap Project staff.

  9. Self-assembled monolayers improve protein distribution on holey carbon cryo-EM supports

    PubMed Central

    Meyerson, Joel R.; Rao, Prashant; Kumar, Janesh; Chittori, Sagar; Banerjee, Soojay; Pierson, Jason; Mayer, Mark L.; Subramaniam, Sriram

    2014-01-01

    Poor partitioning of macromolecules into the holes of holey carbon support grids frequently limits structural determination by single particle cryo-electron microscopy (cryo-EM). Here, we present a method to deposit, on gold-coated carbon grids, a self-assembled monolayer whose surface properties can be controlled by chemical modification. We demonstrate the utility of this approach to drive partitioning of ionotropic glutamate receptors into the holes, thereby enabling 3D structural analysis using cryo-EM methods. PMID:25403871

  10. Prehospital recognition of severe sepsis: development and validation of a novel EMS screening tool

    PubMed Central

    Polito, Carmen C.; Isakov, Alex; Yancey, Arthur H.; Wilson, Duncan K.; Anderson, Blake A.; Bloom, Ingrid; Martin, Greg S.; Sevransky, Jonathan E.

    2015-01-01

    Objective To derive and validate a predictive model and novel Emergency Medical Services (EMS) screening tool for severe sepsis (SS). Design Retrospective cohort study. Setting A single EMS system and an urban, public hospital. Patients Sequential adult, non-trauma, non-arrest, at-risk, EMS-transported patients between January 1, 2011 and December 31, 2012. At-risk patients were defined as having all 3 of the following criteria present in the EMS setting: heart rate >90bpm, 2) respiratory rate >20bpm, and 3) systolic blood pressure <110mmHg. Interventions None. Measurements and Main Results Among 66,439 EMS encounters, 555 met criteria for analysis. Fourteen percent (n=75) of patients had SS, of which 19% (n=14) were identified by EMS clinical judgment. In-hospital mortality for patients with SS was 31% (n=23). Six EMS characteristics were found to be predictors of SS: older age, transport from nursing home, Emergency Medical Dispatch (EMD) 9-1-1 chief complaint category of “Sick Person”, hot tactile temperature assessment, low systolic blood pressure, and low oxygen saturation. The final predictive model showed good discrimination in derivation and validation subgroups (AUC 0.843 and 0.820, respectively). Sensitivity of the final model was 91% in the derivation group and 78% in the validation group. At a pre-defined threshold of 2 or more points, prehospital severe sepsis (PRESS) score sensitivity was 86%. Conclusions The PRESS score is a novel EMS screening tool for SS that demonstrates a sensitivity of 86% and specificity of 47%. Additional validation is needed before this tool can be recommended for widespread clinical use. PMID:26070235

  11. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    A view from inside NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, as the Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is loaded into the aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  12. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the Orion Exploration Mission-1 (EM-1) structural test article, secured in its transport container, is loaded into the agency's Super Guppy aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  13. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    NASA's Super Guppy aircraft takes off from the runway at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article, secured inside the Super Guppy, will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  14. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is lifted up by crane from its transport vehicle at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be loaded into NASA's Super Guppy aircraft, in view at left, and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  15. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    A view from inside NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, will be loaded into the Super Guppy for transport to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  16. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is loaded into NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  17. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the agency's Super Guppy aircraft closes after the Orion Exploration Mission-1 (EM-1) structural test article, in its transport container, is secured inside. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  18. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    The Orion Exploration Mission-1 (EM-1) structural test article, inside its transport container, is secured in NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  19. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, arrives at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be loaded into NASA's Super Guppy aircraft, in view at left, and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  20. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    NASA's Super Guppy aircraft throttles up for takeoff on the runway at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article, secured inside the Super Guppy, will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  1. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    The front of NASA's Super Guppy aircraft has been opened at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, will be loaded into the Super Guppy for transport to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  2. Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

    NASA Image and Video Library

    2017-04-25

    On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, NASA and contractor workers review procedures before beginning loading of the Orion Exploration Mission-1 (EM-1) structural test article in its transport container into NASA's Super Guppy aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  3. The development of cryo-EM into a mainstream structural biology technique

    PubMed Central

    Nogales, Eva

    2016-01-01

    Single-particle cryo-electron microscopy (cryo-EM) has emerged over the last two decades as a technique capable of studying challenging systems that otherwise defy structural characterization. Recent technical advances have resulted in a ‘quantum leap’ in applicability, throughput and achievable resolution that has gained this technique worldwide attention. Here I discuss some of the major historical landmarks in the development of the cryo-EM field, ultimately leading to its present success. PMID:27110629

  4. Guppy Arrival for Orion EM-1 Crew Module Structural Test Article

    NASA Image and Video Library

    2017-04-24

    NASA's Super Guppy airplane touches down on the runway at the Shuttle Landing Facility at the agency's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article will be loaded in the Super Guppy and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  5. Guppy Arrival for Orion EM-1 Crew Module Structural Test Article

    NASA Image and Video Library

    2017-04-24

    NASA's Super Guppy airplane descends toward the runway at the Shuttle Landing Facility at the agency's Kennedy Space Center in Florida. The Orion Exploration Mission-1 (EM-1) structural test article will be loaded in the Super Guppy and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

  6. EMS Provider Attitudes and Perceptions of Enrolling Patients without Consent in Prehospital Emergency Research.

    PubMed

    Jasti, Jamie; Fernandez, Antonio R; Schmidt, Terri A; Lerner, E Brooke

    2016-01-01

    The purpose of this study was to evaluate the attitudes and opinions of a broad population of EMS providers on enrolling patients in research without consent. A survey was conducted in 2010 of all EMS providers who participated in the National Registry of Emergency Medical Technicians (NREMT) reregistration process, which included half of all registered providers. Each reregistration packet included our optional survey, which had nine 6-point Likert scale questions concerning their opinion of research studies without consent as well as 8 demographic questions. Responses were collapsed to agree and disagree and then analyzed using descriptive statistics with 99% confidence intervals. A total of 65,993 EMS providers received the survey and 23,832 (36%) participated. Most respondents agreed (98.4%, 99%CI: 98.2-98.6) that EMS research is important, but only 30.9% (99%CI: 30.1-31.6) agreed with enrolling patients without their consent when it is important to learn about a new treatment. Only 46.6% (99%Cl: 45.7-47.4) were personally willing to be enrolled in a study without their consent. A majority (68.5% [99%Cl: 67.7-69.3]) of respondents believed that EMS providers should have the individual right to refuse to enroll patients in EMS research. While the majority of respondents agreed that EMS research is important, considerably less agree with enrolling patients without consent and less than half would be willing to be enrolled in a study without their consent. Prior to starting an Exception from Informed Consent (EFIC) study, researchers should discuss with EMS providers their perceptions of enrolling patients without consent and address their concerns.

  7. Pre-flight risk assessment in emergency medical service (EMS) helicopters

    NASA Technical Reports Server (NTRS)

    Shively, Robert J.

    1990-01-01

    A preflight risk assessment system (SAFE) was developed at NASA-Ames Research Center for civil EMS operations to assist pilots in making a decision objectively to accept or decline a mission. The ability of the SAFE system to predict risk profiles was examined at an EMS operator. Results of this field study showed that the usefulness of SAFE was largely dependent on the type of mission flown.

  8. Effects of Loaded Squat Exercise with and without Application of Superimposed EMS on Physical Performance

    PubMed Central

    Wirtz, Nicolas; Zinner, Christoph; Doermann, Ulrike; Kleinoeder, Heinz; Mester, Joachim

    2016-01-01

    The aim of the present study was to investigate the effects of a multiple set squat exercise training intervention with superimposed electromyostimulation (EMS) on strength and power, sprint and jump performance. Twenty athletes from different disciplines participated and were divided into two groups: strength training (S) or strength training with superimposed EMS (S+E). Both groups completed the same training program twice a week over a six week period consisting of four sets of the 10 repetition maximum of back squats. Additionally, the S+E group had EMS superimposed to the squat exercise with simultaneous stimulation of leg and trunk muscles. EMS intensity was adjusted to 70% of individual pain threshold to ensure dynamic movement. Strength and power of different muscle groups, sprint, and vertical jump performance were assessed one week before (pre), one week after (post) and three weeks (re) following the training period. Both groups showed improvements in leg press strength and power, countermovement and squat jump performance and pendulum sprint (p < 0.05), with no changes for linear sprint. Differences between groups were only evident at the leg curl machine with greater improvements for the S+E group (p < 0.05). Common squat exercise training and squat exercise with superimposed EMS improves maximum strength and power, as well as jumping abilities in athletes from different disciplines. The greater improvements in strength performance of leg curl muscles caused by superimposed EMS with improvements in strength of antagonistic hamstrings in the S+E group are suggesting the potential of EMS to unloaded (antagonistic) muscle groups. Key points Similar strength adaptations occurred after a 6 week 10 RM back squat exercise program with superimposed EMS (S+E) and 10 RM back squat exercise (S) alone. Specific adaptations for S+E at the leg curl muscles were evident. S and S+E improved SJ, CMJ and pendulum sprint performance. No improvement occurred in linear

  9. Sobre o uso das séries de Puiseux em mecanica celeste

    NASA Astrophysics Data System (ADS)

    Miloni, O. I.

    2003-08-01

    Neste trabalho é apresentada uma demonstração do uso dos diferentes desenvolvimentos em séries para as equações de perturbação em Mecânica Celeste no marco Hamiltoniano. Em trabalhos clássicos como os de Poincaré (Poincaré, 1893) por exemplo, já esta planteado o uso de potências não inteiras no pequeno parâmetro, o que evidencia a não analiticidade das funções quando uma ressonância ocorre. Nestes trabalhos os desenvolvimentos são na raíz quadrada da massa de Júpiter (o pequeno parâmetro). Mais recentemente (Ferraz-Mello, 1985) outros tipos de desenvolvimentos foram aplicados modificando substancialmente as ordens de grandeza e a velocidade de convergência das séries. Com esta abordagem, os desenvolvimentos foram expressados em termos da raíz cúbica do pequeno parâmetro. Neste trabalho apresentamos um enfoque geral, onde os diferentes tipos de desenvolvimentos em séries de Puiseux (Valiron, 1950) são obtidos a partir da aplicação de Teorema de Preparação de Weierstrass (Goursat, 1916) considerando a equação de Hamilton-Jacobi como uma equação algébrica. Os resultados são aplicados ao problema restrito dos três corpos em ressonância de primeira ordem e, dependendo da grandeza da excentricidade do asteróide em relação à de Júpiter, obtemos os diferentes desenvolvimentos, em raíz quadrada ou raíz cúbica da massa de Júpiter.

  10. EM techniques for archaeological laboratory experiments: preliminary results

    NASA Astrophysics Data System (ADS)

    Capozzoli, Luigi; De Martino, Gregory; Giampaolo, Valeria; Raffaele, Luongo; Perciante, Felice; Rizzo, Enzo

    2015-04-01

    The electromagnetic techniques (EM) are based on the investigation of subsoil geophysical parameters and in the archaeological framework they involve in studying contrasts between the buried cultural structures and the surrounding materials. Unfortunately, the geophysical contrast between archaeological features and surrounding soils sometimes are difficult to define due to problems of sensitivity and resolution both related on the characteristic of the subsoil and the geophysical methods. For this reason an experimental activity has been performed in the Hydrogeosite laboratory addressed on the assessment of the capability of geophysical techniques to detect archeological remains placed in the humid/saturated subsoil. At Hydrogeosite Laboratory of CNR-IMAA, a large scale sand-box is located, consisting on a pool shape structures of 230m3 where archaeological remains have been installed . The remains are relative to a living environment and burial of Roman times (walls, tombs, roads, harbour, etc.) covered by sediments. In order to simulate lacustrine and wetland condition and to simulate extreme events (for example underwater landslide, fast natural erosion coast, etc.) the phreatic level was varied and various acquisitions for the different scenarios were performed. In order to analyze the EM behavior of the buried small archaeological framework, ground penetrating radar (GPR) and electrical resistivity tomographies were performed. With GPR, analysis in time domain and frequency domain were performed and coupled to information obtained through resistivity analysis with the support of numerical simulations used to compare the real data with those modeled. A dense grid was adopted for 400 and 900 MHz e-m acquisitions in both the directions, the maximum depth of investigation was limited and less than 3 meters. The same approach was used for ERT acquisition where different array are employed, in particular 3D configuration was used to carry out a 3D resistivity

  11. Two SERK Receptor-Like Kinases Interact with EMS1 to Control Anther Cell Fate Determination1[OPEN

    PubMed Central

    Wang, Yao; Ahsan, Nagib; Biener, Gabriel; Paprocki, Joel

    2017-01-01

    Cell signaling pathways mediated by leucine-rich repeat receptor-like kinases (LRR-RLKs) are essential for plant growth, development, and defense. The EMS1 (EXCESS MICROSPOROCYTES1) LRR-RLK and its small protein ligand TPD1 (TAPETUM DETERMINANT1) play a fundamental role in somatic and reproductive cell differentiation during early anther development in Arabidopsis (Arabidopsis thaliana). However, it is unclear whether other cell surface molecules serve as coregulators of EMS1. Here, we show that SERK1 (SOMATIC EMBRYOGENESIS RECEPTOR-LIKE KINASE1) and SERK2 LRR-RLKs act redundantly as coregulatory and physical partners of EMS1. The SERK1/2 genes function in the same genetic pathway as EMS1 in anther development. Bimolecular fluorescence complementation, Förster resonance energy transfer, and coimmunoprecipitation approaches revealed that SERK1 interacted biochemically with EMS1. Transphosphorylation of EMS1 by SERK1 enhances EMS1 kinase activity. Among 12 in vitro autophosphorylation and transphosphorylation sites identified by tandem mass spectrometry, seven of them were found to be critical for EMS1 autophosphorylation activity. Furthermore, complementation test results suggest that phosphorylation of EMS1 is required for its function in anther development. Collectively, these data provide genetic and biochemical evidence of the interaction and phosphorylation between SERK1/2 and EMS1 in anther development. PMID:27920157

  12. Cryo-EM Data Are Superior to Contact and Interface Information in Integrative Modeling

    PubMed Central

    de Vries, Sjoerd J.; Chauvot de Beauchêne, Isaure; Schindler, Christina E.M.; Zacharias, Martin

    2016-01-01

    Protein-protein interactions carry out a large variety of essential cellular processes. Cryo-electron microscopy (cryo-EM) is a powerful technique for the modeling of protein-protein interactions at a wide range of resolutions, and recent developments have caused a revolution in the field. At low resolution, cryo-EM maps can drive integrative modeling of the interaction, assembling existing structures into the map. Other experimental techniques can provide information on the interface or on the contacts between the monomers in the complex. This inevitably raises the question regarding which type of data is best suited to drive integrative modeling approaches. Systematic comparison of the prediction accuracy and specificity of the different integrative modeling paradigms is unavailable to date. Here, we compare EM-driven, interface-driven, and contact-driven integrative modeling paradigms. Models were generated for the protein docking benchmark using the ATTRACT docking engine and evaluated using the CAPRI two-star criterion. At 20 Å resolution, EM-driven modeling achieved a success rate of 100%, outperforming the other paradigms even with perfect interface and contact information. Therefore, even very low resolution cryo-EM data is superior in predicting heterodimeric and heterotrimeric protein assemblies. Our study demonstrates that a force field is not necessary, cryo-EM data alone is sufficient to accurately guide the monomers into place. The resulting rigid models successfully identify regions of conformational change, opening up perspectives for targeted flexible remodeling. PMID:26846888

  13. An Uncertainty Analysis for Predicting Soil Profile Salinity Using EM Induction Data

    NASA Astrophysics Data System (ADS)

    Huang, Jingyi; Monteiro Santos, Fernando; Triantafilis, John

    2016-04-01

    Proximal soil sensing techniques such as electromagnetic (EM) induction have been used to identify and map the areal variation of average soil properties. However, soil varies with depth owing to the action of various soil forming factors (e.g., parent material and topography). In this work we collected EM data using an EM38 and EM34 meter along a 22-km transect in the Trangie District, Australia.We jointly inverted these data using EM4Soil software and compare our 2-dimensional model of true electrical conductivity (sigma - mS/m) with depth against measured electrical conductivity of a saturated soil-paste extract (ECe - dS/m) at depth of 0-16 m. Through the use of a linear regression (LR) model and by varying forward modelling algorithms (cumulative function and full solution), inversion algorithms (S1 and S2), and damping factor (lambda) we determined a suitable electromagnetic conductivity image (EMCI) which was optimal when using the full solution, S2 and lambda = 0.6. To evaluate uncertainty of the inversion process and the LR model, we conducted an uncertainty analysis. The distribution of the model misfit shows the largest uncertainty caused by inversion (mostly due to EM34-40) occurs at deeper profiles while the largest uncertainty of the LR model occurs where the soil profile is most saline. These uncertainty maps also illustrate us how the model accuracy can be improved in the future.

  14. The Impact of the Geriatrics Education for EMS Training Program in a Rural Community

    PubMed Central

    Shah, Manish N.; Rajasekaran, Karthik; Sheahan, William D.; Wimbush, Tracy; Karuza, Jurgis

    2008-01-01

    The Geriatrics Education for EMS (GEMS) course provides continuing education for emergency medical service (EMS) providers. This study evaluates the impact of the course on EMS providers in a rural county by performing a prospective cohort study using a pre-/post- survey design. We used the Geriatric Attitude Scale, the GEMS knowledge post-test, a class satisfaction survey, and a survey evaluating EMS providers’ comfort in caring for older adults to measure the classes’ impact. Eighty-eight EMS providers participated. All passed the course and were very satisfied with the course. Follow up was completed on 77(80%). No significant change in attitude score was identified (p=0.09). Median comfort scores significantly increased for the following domains: communications, medical care, abuse evaluation, and falls evaluation. Providing the GEMS course to EMS providers in a rural community resulted in students achieving a pre-established level of knowledge regarding caring for older adults and an increase in their comfort level for the care of older adults. The impact of the training on patient outcomes needs to be identified. PMID:18482304

  15. Anisotropic 3D inversion of towed streamer EM data from the Troll West oil province (Invited)

    NASA Astrophysics Data System (ADS)

    Mattsson, J.; Midgley, J.; Zhdanov, M. S.; ENDO, M.

    2013-12-01

    Obviating the need for ocean bottom receivers, the towed streamer EM system enables CSEM data to be acquired simultaneously with seismic over very large areas in frontier and mature basins for higher production rates and more cost effective than conventional marine CSEM. The towed streamer EM data are currently processed and delivered as a spectrum of frequency-domain responses. We apply a 3D anisotropic inversion methodology for towed streamer EM data that includes a moving sensitivity domain. Our implementation is based on the 3D contraction integral equation method for computing the EM responses and Fréchet derivatives, and uses the re-weighted regularized conjugate gradient method for minimizing the objective functional with focusing regularization. We present an actual case study for the 3D anisotropic inversion of towed streamer EM data from the Troll West oil province in the North Sea, and demonstrate our ability to image the Troll West Oil and Gas Provinces. We conclude that 3D anisotropic inversion of the data from the current generation of towed streamer EM system can adequately recover both the vertical and horizontal resistivities in anisotropic hydrocarbon-bearing formations.

  16. Fusion to a homo-oligomeric scaffold allows cryo-EM analysis of a small protein

    PubMed Central

    Coscia, Francesca; Estrozi, Leandro F.; Hans, Fabienne; Malet, Hélène; Noirclerc-Savoye, Marjolaine; Schoehn, Guy; Petosa, Carlo

    2016-01-01

    Recent technical advances have revolutionized the field of cryo-electron microscopy (cryo-EM). However, most monomeric proteins remain too small (<100 kDa) for cryo-EM analysis. To overcome this limitation, we explored a strategy whereby a monomeric target protein is genetically fused to a homo-oligomeric scaffold protein and the junction optimized to allow the target to adopt the scaffold symmetry, thereby generating a chimeric particle suitable for cryo-EM. To demonstrate the concept, we fused maltose-binding protein (MBP), a 40 kDa monomer, to glutamine synthetase, a dodecamer formed by two hexameric rings. Chimeric constructs with different junction lengths were screened by biophysical analysis and negative-stain EM. The optimal construct yielded a cryo-EM reconstruction that revealed the MBP structure at sub-nanometre resolution. These findings illustrate the feasibility of using homo-oligomeric scaffolds to enable cryo-EM analysis of monomeric proteins, paving the way for applying this strategy to challenging structures resistant to crystallographic and NMR analysis. PMID:27485862

  17. New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

    SciTech Connect

    Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

    2013-07-01

    A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In March 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)

  18. Operation Protective Edge - A Unique Challenge for a Civilian EMS Agency.

    PubMed

    Jaffe, Eli; Strugo, Refael; Wacht, Oren

    2015-10-01

    During July through August 2014, Operation Protective Edge, a military conflict between Israel and the Hamas regime in Gaza, dramatically affected both populations. Magen David Adom (MDA), the Israeli national Emergency Medical Service (EMS) and a member of the Red Cross, faced a unique challenge during the conflict: to continue providing crucial service to the entire civilian population of Israel, which was under constant missile threat. This challenge included not only providing immediate care for routine EMS calls under missile threat, but also preparing and delivering immediate care to civilians injured in attacks on major cities, as well as small communities, in Israel. This task is a challenge for a civilian EMS agency that normally operates in a non-military environment, yet, in an instant, must enhance its capability to respond to a considerable threat to its population. During Operation Protective Edge, MDA provided care for 842 wounded civilians and utilized a significant amount of its resources. Providing EMS services for a civilian population in a mixed civilian/military scenario is a challenging task on a national level for an EMS system, especially when the threat lasts for weeks. This report describes MDA's preparedness and operations during Operation Protective Edge, and the unique EMS challenges and dilemmas the agency faced.

  19. Streptavidin crystals as nanostructured supports and image-calibration references for cryo-EM data collection.

    PubMed

    Wang, Liguo; Ounjai, Puey; Sigworth, Fred J

    2008-11-01

    For cryo-EM structural studies, we seek to image membrane proteins as single particles embedded in proteoliposomes. One technical difficulty has been the low density of liposomes that can be trapped in the approximately 100nm ice layer that spans holes in the perforated carbon support film of EM grids. Inspired by the use of two-dimensional (2D) streptavidin crystals as an affinity surface for biotinylated DNA (Crucifix et al., 2004), we propose to use the crystals to tether liposomes doped with biotinylated lipids. The 2D crystal image also serves as a calibration of the image formation process, providing an absolute conversion from electrostatic potentials in the specimen to the EM image intensity, and serving as a quality control of acquired cryo-EM images. We were able to grow streptavidin crystals covering more than 90% of the holes in an EM grid, and which remained stable even under negative stain. The liposome density in the resulting cryo-EM sample was uniform and high due to the high-affinity binding of biotin to streptavidin. Using computational methods, the 2D crystal background can be removed from images without noticeable effect on image properties.

  20. Stroke savvy. The accuracy of EMS-reported last known normal times.

    PubMed

    Wesley, Keith; Wesley, Karen

    2014-09-01

    We collected EMS-reported "last known normal" (LKN) times for patients brought to the ED with suspected acute stroke and calculated the absolute difference between the neurologist-determined and EMS-reported LKN times (deltaLKN). We determined the rate of inappropriate IV tissue plasminogen activator (tPA) use if the EMS-reported times were used instead of the neurologist-determined times. Of 251 patients, mean and median deltaLKN were 28 and 0 minutes, respectively. deltaLKN was < 15 minutes in 91% of the entire group and < 15 minutes in 80% of patients with a diagnosis of stroke. Of patients who received IV tPA, none would've been incorrectly excluded from IV tPA if the EMS LKN time had been used. Conversely, of patients who didn't receive IV tPA, 6% would have been incorrectly included for IV tPA consideration had the EMS time been used. In patients with wake-up stroke symptoms, EMS underestimated LKN times by an average of 208 minutes. All of the potentially incorrectly included patients would've been wake-up strokes.

  1. Abundâncias em estrelas de Bário

    NASA Astrophysics Data System (ADS)

    Allen, D. M.

    2003-08-01

    Estrelas de Bário apresentam linhas intensas de elementos produzidos pelo processos (ex: Ba, Y, Sr, Zr) e bandas intensas de CN, C2 e CH. A hipótese mais aceita sobre a origem deste grupo peculiar é a de que essas estrelas façam parte de sistemas binários, tendo recebido material enriquecido em elementos pesados da companheira mais evoluída. Apresentamos neste trabalho uma análise detalhada de uma amostra de estrelas desta classe, incluindo determinação de parâmetros atmosféricos e cálculo de abundâncias. As temperaturas efetivas foram determinadas a partir de dados fotométricos obtidos com o Fotrap instalado no telescópio Zeiss do LNA (Laboratório Nacional de Astrofísica) (B-V, V-I, R-I, V-R), e coletados na literatura nos catálogos Hipparcos (B-V), 2MASS (Two Micron All Sky Survey) (V-K) e The General Catalogue Photometric Data (sistema Geneva). Obtivemos uma faixa de temperaturas de 4400 £ Tef £ 6500. As metalicidades foram determinadas a partir de linhas de Fe I e Fe II, estando os resultados no intervalo -1 £ [Fe/H] £ +0.1. O log g foi determinado pelo equilíbrio de ionização e pela relação com a magnitude bolométrica, a temperatura e a massa, sendo os resultados na faixa 1.5 £ log g £ 4.5. As distâncias utilizadas foram determinadas com o auxílio das paralaxes Hipparcos, e as massas determinadas por modelos de isócronas. Os espectros utilizados foram obtidos com o espectrógrafo FEROS no Telescópio de 1,5m do ESO (European Southern Observatory). As abundâncias foram calculadas por meio de síntese espectral de linhas individuais incluindo elementos alfa, pico do Fe, s e r. Encontramos um excesso de elementos pesados em relação ao Fe, como esperado para estrelas de Bário.

  2. If EM waves don't interfere, what causes interferograms?

    NASA Astrophysics Data System (ADS)

    Wellard, Stanley J.

    2012-10-01

    Photonics engineers involved in designing and operating Fourier transform spectrometers (FTS) often rely on Maxwell's wave equations and time-frequency (distance-wavenumber) Fourier theory as models to understand and predict the conversion of optical energy to electrical signals in their instruments. Dr. Chandrasekhar Roychoudhuri and his colleagues, at last year's conference, presented three significant concepts that might completely change the way we comprehend the interaction of light and matter and the way interference information is generated. The first concept is his non-interaction of waves (NIW) formulation, which puts in place an optical wave description that more accurately describe the properties of the finite time and spatial signals of an optical system. The second is a new description for the cosmic EM environment that recognizes that space is really filled with the ether of classical electromagnetics. The third concept is a new metaphysics or metaphotonics that compares the photon as a particle in a void against the photon as a wave in a medium to see which best explain the twelve different aspects of light. Dr. Henry Lindner presents a compelling case that photons are waves in a medium and particles (electrons, protons, atoms) are wave-structures embedded in the new ether. Discussion of the three new principles is intended to increase the curiosity of photonics engineers to investigate these changes in the nature of light and matter.

  3. An EM Induction Hi-Speed Rotation Angular Rate Sensor.

    PubMed

    Li, Kai; Li, Yuan; Han, Yan

    2017-03-17

    A hi-speed rotation angular rate sensor based on an electromagnetic induction signal is proposed to provide a possibility of wide range measurement of high angular rates. An angular rate sensor is designed that works on the principle of electromagnetism (EM) induction. In addition to a zero-phase detection technique, this sensor uses the feedback principle of magnetic induction coils in response to a rotating magnetic field. It solves the challenge of designing an angular rate sensor that is suitable for both low and high rotating rates. The sensor was examined for angular rate measurement accuracy in simulation tests using a rotary table. The results show that it is capable of measuring angular rates ranging from 1 rps to 100 rps, with an error within 1.8‰ of the full scale (FS). The proposed sensor is suitable to measurement applications where the rotation angular rate is widely varied, and it contributes to design technology advancements of real-time sensors measuring angular acceleration, angular rate, and angular displacement of hi-speed rotary objects.

  4. An EM Induction Hi-Speed Rotation Angular Rate Sensor

    PubMed Central

    Li, Kai; Li, Yuan; Han, Yan

    2017-01-01

    A hi-speed rotation angular rate sensor based on an electromagnetic induction signal is proposed to provide a possibility of wide range measurement of high angular rates. An angular rate sensor is designed that works on the principle of electromagnetism (EM) induction. In addition to a zero-phase detection technique, this sensor uses the feedback principle of magnetic induction coils in response to a rotating magnetic field. It solves the challenge of designing an angular rate sensor that is suitable for both low and high rotating rates. The sensor was examined for angular rate measurement accuracy in simulation tests using a rotary table. The results show that it is capable of measuring angular rates ranging from 1 rps to 100 rps, with an error within 1.8‰ of the full scale (FS). The proposed sensor is suitable to measurement applications where the rotation angular rate is widely varied, and it contributes to design technology advancements of real-time sensors measuring angular acceleration, angular rate, and angular displacement of hi-speed rotary objects. PMID:28304348

  5. CryoEM structure of the spliceosome immediately after branching

    PubMed Central

    Galej, Wojciech P.; Wilkinson, Max E.; Fica, Sebastian M.; Oubridge, Chris; Newman, Andrew J.; Nagai, Kiyoshi

    2016-01-01

    Pre-mRNA splicing proceeds by two consecutive trans-esterification reactions via a lariat-intron intermediate. We present the 3.8Å cryoEM structure of the spliceosome immediately after lariat formation. The 5’-splice site is cleaved but remains close to the catalytic Mg2+ site in the U2/U6 snRNA triplex, and the 5’-phosphate of the intron nucleotide G(+1) is linked to the branch adenosine 2’OH. The 5’-exon is held between the Prp8 N-terminal and Linker domains, and base-pairs with U5 snRNA loop 1. Non-Watson-Crick interactions between the branch helix and 5’-splice site dock the branch adenosine into the active site, while intron nucleotides +3 to +6 base-pair with the U6 snRNA ACAGAGA sequence. Isy1 and the step one factors Yju2 and Cwc25 stabilise docking of the branch helix. The intron downstream of the branch site emerges between the Prp8 RT and Linker domains and extends towards Prp16 helicase, suggesting a plausible mechanism of remodelling before exon ligation. PMID:27459055

  6. Orthogonalizing EM: A design-based least squares algorithm.

    PubMed

    Xiong, Shifeng; Dai, Bin; Huling, Jared; Qian, Peter Z G

    We introduce an efficient iterative algorithm, intended for various least squares problems, based on a design of experiments perspective. The algorithm, called orthogonalizing EM (OEM), works for ordinary least squares and can be easily extended to penalized least squares. The main idea of the procedure is to orthogonalize a design matrix by adding new rows and then solve the original problem by embedding the augmented design in a missing data framework. We establish several attractive theoretical properties concerning OEM. For the ordinary least squares with a singular regression matrix, an OEM sequence converges to the Moore-Penrose generalized inverse-based least squares estimator. For ordinary and penalized least squares with various penalties, it converges to a point having grouping coherence for fully aliased regression matrices. Convergence and the convergence rate of the algorithm are examined. Finally, we demonstrate that OEM is highly efficient for large-scale least squares and penalized least squares problems, and is considerably faster than competing methods when n is much larger than p. Supplementary materials for this article are available online.

  7. Orthogonalizing EM: A design-based least squares algorithm

    PubMed Central

    Xiong, Shifeng; Dai, Bin; Huling, Jared; Qian, Peter Z. G.

    2016-01-01

    We introduce an efficient iterative algorithm, intended for various least squares problems, based on a design of experiments perspective. The algorithm, called orthogonalizing EM (OEM), works for ordinary least squares and can be easily extended to penalized least squares. The main idea of the procedure is to orthogonalize a design matrix by adding new rows and then solve the original problem by embedding the augmented design in a missing data framework. We establish several attractive theoretical properties concerning OEM. For the ordinary least squares with a singular regression matrix, an OEM sequence converges to the Moore-Penrose generalized inverse-based least squares estimator. For ordinary and penalized least squares with various penalties, it converges to a point having grouping coherence for fully aliased regression matrices. Convergence and the convergence rate of the algorithm are examined. Finally, we demonstrate that OEM is highly efficient for large-scale least squares and penalized least squares problems, and is considerably faster than competing methods when n is much larger than p. Supplementary materials for this article are available online. PMID:27499558

  8. EM modeling for GPIR using 3D FDTD modeling codes

    SciTech Connect

    Nelson, S.D.

    1994-10-01

    An analysis of the one-, two-, and three-dimensional electrical characteristics of structural cement and concrete is presented. This work connects experimental efforts in characterizing cement and concrete in the frequency and time domains with the Finite Difference Time Domain (FDTD) modeling efforts of these substances. These efforts include Electromagnetic (EM) modeling of simple lossless homogeneous materials with aggregate and targets and the modeling dispersive and lossy materials with aggregate and complex target geometries for Ground Penetrating Imaging Radar (GPIR). Two- and three-dimensional FDTD codes (developed at LLNL) where used for the modeling efforts. Purpose of the experimental and modeling efforts is to gain knowledge about the electrical properties of concrete typically used in the construction industry for bridges and other load bearing structures. The goal is to optimize the performance of a high-sample-rate impulse radar and data acquisition system and to design an antenna system to match the characteristics of this material. Results show agreement to within 2 dB of the amplitudes of the experimental and modeled data while the frequency peaks correlate to within 10% the differences being due to the unknown exact nature of the aggregate placement.

  9. First Results from the Scarborough Marine EM Survey

    NASA Astrophysics Data System (ADS)

    Constable, S.; Key, K. W.; Myer, D. G.

    2009-12-01

    In May/June 2009 we carried out a large marine controlled source EM (CSEM) and magnetotelluric (MT) survey over the Scarborough gas field off northwest Australia. We supplemented traditional marine CSEM and MT data collection (deeptowed electric field transmissions into seafloor horizontal electric and magnetic field recorders) with new techniques such as continuously towed 3-axis electric field recorders, electric field gradiometers, vertical electric field sensors, novel long base line acoustic navigation solutions for the transmitter, and broad-spectrum waveforms. A total of 144 receiver deployments and 12 days of transmitter tow allowed full 3D coverage of the reservoir, along with considerable off-target control. Noise floors are good, around 10^{-15} V/Am^2 and 10^{18} T/Am, limited not by receiver noise but by water motion. The reservoir is clearly visible in the data at source-receiver offsets of 1 to 8~km. First results of 1D and 2D modeling will be presented.

  10. Specimen preparation for high-resolution cryo-EM

    PubMed Central

    Passmore, Lori A.; Russo, Christopher J.

    2016-01-01

    Imaging a material with electrons at near-atomic resolution requires a thin specimen that is stable in the vacuum of the transmission electron microscope. For biological samples, this comprises a thin layer of frozen aqueous solution containing the biomolecular complex of interest. The process of preparing a high-quality specimen is often the limiting step in the determination of structures by single-particle electron cryomicroscopy (cryo-EM). Here we describe a systematic approach for going from a purified biomolecular complex in aqueous solution to high-resolution electron micrographs that are suitable for 3D structure determination. This includes a series of protocols for the preparation of vitrified specimens on various specimen supports, including all-gold and graphene. We also describe techniques for troubleshooting when a preparation fails to yield suitable specimens, and common mistakes to avoid during each part of the process. Finally, we include recommendations for obtaining the highest quality micrographs from prepared specimens with current microscope, detector and support technology. PMID:27572723

  11. PREFACE: EmQM13: Emergent Quantum Mechanics 2013

    NASA Astrophysics Data System (ADS)

    2014-04-01

    These proceedings comprise the invited lectures of the second international symposium on Emergent Quantum Mechanics (EmQM13), which was held at the premises of the Austrian Academy of Sciences in Vienna, Austria, 3-6 October 2013. The symposium was held at the ''Theatersaal'' of the Academy of Sciences, and was devoted to the open exploration of emergent quantum mechanics, a possible ''deeper level theory'' that interconnects three fields of knowledge: emergence, the quantum, and information. Could there appear a revised image of physical reality from recognizing new links between emergence, the quantum, and information? Could a novel synthesis pave the way towards a 21st century, ''superclassical'' physics? The symposium provided a forum for discussing (i) important obstacles which need to be overcome as well as (ii) promising developments and research opportunities on the way towards emergent quantum mechanics. Contributions were invited that presented current advances in both standard as well as unconventional approaches to quantum mechanics. The EmQM13 symposium was co-organized by Gerhard Grössing (Austrian Institute for Nonlinear Studies (AINS), Vienna), and by Jan Walleczek (Fetzer Franklin Fund, USA, and Phenoscience Laboratories, Berlin). After a very successful first conference on the same topic in 2011, the new partnership between AINS and the Fetzer Franklin Fund in producing the EmQM13 symposium was able to further expand interest in the promise of emergent quantum mechanics. The symposium consisted of two parts, an opening evening addressing the general public, and the scientific program of the conference proper. The opening evening took place at the Great Ceremonial Hall (Grosser Festsaal) of the Austrian Academy of Sciences, and it presented talks and a panel discussion on ''The Future of Quantum Mechanics'' with three distinguished speakers: Stephen Adler (Princeton), Gerard 't Hooft (Utrecht) and Masanao Ozawa (Nagoya). The articles contained in

  12. Expert witness qualifications and ethical guidelines for emergency medical services litigation: resource document for the National Association of EMS Physicians position statement.

    PubMed

    Maggiore, W Ann Winnie; Kupas, Douglas F; Glushak, Cai

    2011-01-01

    The clinical provision of medical care by emergency medical services (EMS) providers in the out-of-hospital environment and the operation of EMS systems to provide that care are unique in the medical arena. There is a substantive difference in the experience of individuals who provide medical care in the out-of-hospital setting and the experience of those who provide similar care in the hospital or other clinical settings. Furthermore, physicians who provide medical direction for EMS personnel have a clinical and oversight relationship with EMS personnel. This relationship uniquely qualifies EMS medical directors to provide expert opinions related to care provided by nonphysician EMS personnel. Physicians without specific EMS oversight experience are not uniformly qualified to provide expert opinion regarding the provision of EMS. This resource document reviews the current issues in expert witness testimony in cases involving EMS as these issues relate to the unique qualifications of the expert witness, the standard of care, and the ethical expectations.

  13. The Rhode Island Life Saving Score (RILSS)--a proposed life-saving definition for EMS and emergency medicine.

    PubMed

    Williams, Kenneth A; Sullivan, Francis M

    2013-12-03

    Emergency Medical Services (EMS) and Emergency Medicine staff are often described as life-saving providers, but there is no generally accepted objective definition of a life saved by these providers. Therefore, a proposed definition is described. Development of this definition began with conceptual rules, followed by a survey of physician EMS medical directors, and then by the development of a tool to implement the definition, and measure its validity and reliability through a review of 100 critical care transport EMS patient charts.

  14. Monitoring Survivability and Infectivity of Porcine Epidemic Diarrhea Virus (PEDv) in the Infected On-Farm Earthen Manure Storages (EMS).

    PubMed

    Tun, Hein M; Cai, Zhangbin; Khafipour, Ehsan

    2016-01-01

    In recent years, porcine epidemic diarrhea virus (PEDv) has caused major epidemics, which has been a burden to North America's swine industry. Low infectious dose and high viability in the environment are major challenges in eradication of this virus. To further understand the viability of PEDv in the infected manure, we longitudinally monitored survivability and infectivity of PEDv in two open earthen manure storages (EMS; previously referred to as lagoon) from two different infected swine farms identified in the province of Manitoba, Canada. Our study revealed that PEDv could survive up to 9 months in the infected EMS after the initial outbreak in the farm. The viral load varied among different layers of the EMS with an average of 1.1 × 10(5) copies/ml of EMS, independent of EMS temperature and pH. In both studied EMS, the evidence of viral replication was observed through increased viral load in the later weeks of the samplings while there was no new influx of infected manure into the EMS, which was suggestive of presence of potential alternative hosts for PEDv within the EMS. Decreasing infectivity of virus over time irrespective of increased viral load suggested the possibility of PEDv evolution within the EMS and perhaps in the new host that negatively impacted virus infectivity. Viral load in the top layer of the EMS was low and mostly non-infective suggesting that environmental factors, such as UV and sunlight, could diminish the replicability and infectivity of the virus. Thus, frequent agitation of the EMS that could expose virus to UV and sunlight might be a potential strategy for reduction of PEDv load and infectivity in the infected EMS.

  15. Monitoring Survivability and Infectivity of Porcine Epidemic Diarrhea Virus (PEDv) in the Infected On-Farm Earthen Manure Storages (EMS)

    PubMed Central

    Tun, Hein M.; Cai, Zhangbin; Khafipour, Ehsan

    2016-01-01

    In recent years, porcine epidemic diarrhea virus (PEDv) has caused major epidemics, which has been a burden to North America’s swine industry. Low infectious dose and high viability in the environment are major challenges in eradication of this virus. To further understand the viability of PEDv in the infected manure, we longitudinally monitored survivability and infectivity of PEDv in two open earthen manure storages (EMS; previously referred to as lagoon) from two different infected swine farms identified in the province of Manitoba, Canada. Our study revealed that PEDv could survive up to 9 months in the infected EMS after the initial outbreak in the farm. The viral load varied among different layers of the EMS with an average of 1.1 × 105 copies/ml of EMS, independent of EMS temperature and pH. In both studied EMS, the evidence of viral replication was observed through increased viral load in the later weeks of the samplings while there was no new influx of infected manure into the EMS, which was suggestive of presence of potential alternative hosts for PEDv within the EMS. Decreasing infectivity of virus over time irrespective of increased viral load suggested the possibility of PEDv evolution within the EMS and perhaps in the new host that negatively impacted virus infectivity. Viral load in the top layer of the EMS was low and mostly non-infective suggesting that environmental factors, such as UV and sunlight, could diminish the replicability and infectivity of the virus. Thus, frequent agitation of the EMS that could expose virus to UV and sunlight might be a potential strategy for reduction of PEDv load and infectivity in the infected EMS. PMID:27014197

  16. Employee retention: applying hospital strategies to EMS. With increasing demand for and decreasing supply of EMTs and paramedics, retention strategies should be a priority for EMS organizations.

    PubMed

    Powers, Robert

    2007-10-01

    Retention strategies are a priority for EMS organizations. These strategies must be broad and varied to address the variety of reasons employees leave healthcare organizations. The value of creating these programs should manifest itself through increased employee satisfaction and an increased sense of belonging to the organization.

  17. Development of Embedded EM Sensors for Estimating Tensile Forces of PSC Girder Bridges.

    PubMed

    Kim, Junkyeong; Kim, Ju-Won; Lee, Chaggil; Park, Seunghee

    2017-08-30

    The tensile force of pre-stressed concrete (PSC) girders is the most important factor for managing the stability of PSC bridges. The tensile force is induced using pre-stressing (PS) tendons of a PSC girder. Because the PS tendons are located inside of the PSC girder, the tensile force cannot be measured after construction using conventional NDT (non-destructive testing) methods. To monitor the induced tensile force of a PSC girder, an embedded EM (elasto-magnetic) sensor was proposed in this study. The PS tendons are made of carbon steel, a ferromagnetic material. The magnetic properties of the ferromagnetic specimen are changed according to the induced magnetic field, temperature, and induced stress. Thus, the tensile force of PS tendons can be estimated by measuring their magnetic properties. The EM sensor can measure the magnetic properties of ferromagnetic materials in the form of a B (magnetic density)-H (magnetic force) loop. To measure the B-H loop of a PS tendon in a PSC girder, the EM sensor should be embedded into the PSC girder. The proposed embedded EM sensor can be embedded into a PSC girder as a sheath joint by designing screw threads to connect with the sheath. To confirm the proposed embedded EM sensors, the experimental study was performed using a down-scaled PSC girder model. Two specimens were constructed with embedded EM sensors, and three sensors were installed in each specimen. The embedded EM sensor could measure the B-H loop of PS tendons even if it was located inside concrete, and the area of the B-H loop was proportionally decreased according to the increase in tensile force. According to the results, the proposed method can be used to estimate the tensile force of unrevealed PS tendons.

  18. Immune protection of microneme 7 (EmMIC7) against Eimeria maxima challenge in chickens.

    PubMed

    Huang, Jingwei; Zhang, Zhenchao; Li, Menghui; Song, Xiaokai; Yan, Ruofeng; Xu, Lixin; Li, Xiangrui

    2015-10-01

    In the present study, the immune protective effects of recombinant microneme protein 7 of Eimeria maxima (rEmMIC7) and a DNA vaccine encoding this antigen (pVAX1-EmMIC7) on experimental challenge were evaluated. Two-week-old chickens were randomly divided into five groups. Experimental groups of chickens were immunized with 100 μg DNA vaccine pVAX1-MIC7 or 200 μg rEmMIC7, while control groups of chickens were injected with pVAX1 plasmid or sterile phosphate buffered saline (PBS). The results showed that the anti-EmMIC7 antibody titres in chickens of both rEmMIC7 and pVAX1-MIC7 groups were significantly higher as compared to PBS and pVAX1 control (P < .05). The splenocytes from both vaccinated groups of chickens displayed significantly greater proliferation response compared with the controls (P < .05). Serum from chickens immunized with pVAX1-MIC7 and rEmMIC7 displayed significantly high levels of interleukin-2, interferon-γ, IL-10, IL-17, tumour growth factor-β and IL-4 (P < .05) compared to those of negative controls. The challenge experiment results showed that both the recombinant antigen and the DNA vaccine could obviously alleviate jejunum lesions, body weight loss and enhance oocyst decrease ratio. The anti-coccidial index (ACI) of the pVAX1-MIC7 group was 167.84, higher than that of the recombinant MIC7 protein group, 167.10. Our data suggested that immunization with EmMIC7 was effective in imparting partial protection against E. maxima challenge in chickens and it could be an effective antigen candidate for the development of new vaccines against E. maxima.

  19. OV-Wav: um novo pacote para análise multiescalar em astronomia

    NASA Astrophysics Data System (ADS)

    Pereira, D. N. E.; Rabaça, C. R.

    2003-08-01

    Wavelets e outras formas de análise multiescalar têm sido amplamente empregadas em diversas áreas do conhecimento, sendo reconhecidamente superiores a técnicas mais tradicionais, como as análises de Fourier e de Gabor, em certas aplicações. Embora a teoria dos wavelets tenha começado a ser elaborada há quase trinta anos, seu impacto no estudo de imagens astronômicas tem sido pequeno até bem recentemente. Apresentamos um conjunto de programas desenvolvidos ao longo dos últimos três anos no Observatório do Valongo/UFRJ que possibilitam aplicar essa poderosa ferramenta a problemas comuns em astronomia, como a remoção de ruído, a detecção hierárquica de fontes e a modelagem de objetos com perfis de brilho arbitrários em condições não ideais. Este pacote, desenvolvido para execução em plataforma IDL, teve sua primeira versão concluída recentemente e está sendo disponibilizado à comunidade científica de forma aberta. Mostramos também resultados de testes controlados ao quais submetemos os programas, com a sua aplicação a imagens artificiais, com resultados satisfatórios. Algumas aplicações astrofísicas foram estudadas com o uso do pacote, em caráter experimental, incluindo a análise da componente de luz difusa em grupos compactos de galáxias de Hickson e o estudo de subestruturas de nebulosas planetárias no espaço multiescalar.

  20. Designing ergonomic interventions for EMS workers: concept generation of patient-handling devices.

    PubMed

    Conrad, Karen M; Reichelt, Paul A; Lavender, Steven A; Gacki-Smith, Jessica; Hattle, Sally

    2008-11-01

    Fire service personnel and private ambulance paramedics suffer musculoskeletal injuries as they lift and carry patients while performing emergency medical services (EMS). Engineering changes, such as the design of new EMS patient-handling devices, offer a potential intervention opportunity for combating this problem. The purpose of this qualitative descriptive study was to generate beginning ideas for the design of new EMS patient-handling devices that were framed within the contextual reality of the end user firefighter/paramedics. Guided by an ecological model of musculoskeletal injuries in the fire service, focus groups were conducted with 25 firefighter/paramedics from 13 suburban fire departments. Based on their availability, participants were assigned to one of three groups with each group focusing on a different EMS patient-handling scenario. Each group participated in two focus group sessions: one session to brainstorm ideas for devices and a second session to validate sketches of their design ideas. The sketches were professionally drawn by an industrial designer who attended all focus group sessions. Sketches, photos, videotapes, and written transcripts were content analyzed to describe the phenomena of interest. The ideas centered on EMS devices for lateral transfers, bed-to-stairchair transfers, and stair descent transport, and served as the starting point for the development of EMS devices in subsequent phases of a mixed method research study. The outcomes of this study were an improved understanding of the contextual issues that need to be considered in designing EMS patient handling devices and a set of industrial design sketches that served as a starting point for subsequent development of the devices. End user acceptance criteria for the devices included: affordability, portability/compactness, durability, operability including being quickly ready for use, and cleanability.

  1. Accurate 2D/3D electromagnetic modeling for time-domain airborne EM systems

    NASA Astrophysics Data System (ADS)

    Yin, C.; Hodges, G.

    2012-12-01

    The existing industry software cannot deliver correct results for 3D time-domain airborne EM responses. In this paper, starting from the Fourier transform and convolution, we compare the stability of different modeling techniques and analyze the reason for instable calculations of the time-domain airborne EM responses. We find that the singularity of the impulse responses of EM systems at very early time that are used in the convolution is responsible for the instability of the modeling (Fig.1). Based on this finding, we put forward an algorithm that uses step response rather than impulse response of the airborne EM system for the convolution and create a stable algorithm that delivers precise results and maintains well the integral/derivative relationship between the magnetic field B and the magnetic induction dB/dt. A three-step transformation procedure for the modeling is proposed: 1) output the frequency-domain EM response data from the existing software; 2) transform into step-response by digital Fourier/Hankel transform; 3) convolve the step response with the transmitting current or its derivatives. The method has proved to be working very well (Fig. 2). The algorithm can be extended to the modeling of other time-domain ground and airborne EM system responses.Fig. 1: Comparison of impulse and step responses for an airborne EM system Fig. 2: Bz and dBz/dt calculated from step (middle panel) and impulse responses (lower panel) for the same 3D model as in Fig.1.

  2. Prevention and Immunotherapy of Secondary Murine Alveolar Echinococcosis Employing Recombinant EmP29 Antigen

    PubMed Central

    Boubaker, Ghalia; Hemphill, Andrew; Huber, Cristina Olivia; Spiliotis, Markus; Babba, Hamouda; Gottstein, Bruno

    2015-01-01

    Alveolar echinococcosis (AE) is caused by infection with the larval stage of the tapeworm Echinococcus multilocularis. An increasing understanding of immunological events that account for the metacestode survival in human and murine AE infection prompted us to undertake explorative experiments tackling the potential of novel preventive and/or immunotherapeutic measures. In this study, the immunoprotective and immunotherapeutic ability of recombinant EmP29 antigen (rEmP29) was assessed in mice that were intraperitoneally infected with E. multilocularis metacestodes. For vaccination, three intraperitoneal injections with 20μg rEmP29 emulsified in saponin adjuvants were applied over 6 weeks. 2 weeks after the last boost, mice were infected, and at 90 days post-infection, rEmP29-vaccinated mice exhibited a median parasite weight that was reduced by 75% and 59% when compared to NaCl- or saponin–treated control mice, respectively. For immunotherapeutical application, the rEmP29 (20μg) vaccine was administered to experimentally infected mice, starting at 1 month post-infection, three times with 2 weeks intervals. Mice undergoing rEmP29 immunotherapy exhibited a median parasite load that was reduced by 53% and 49% when compared to NaCl- and saponin–treated control mice, respectively. Upon analysis of spleen cells, both, vaccination and treatment with rEmP29, resulted in low ratios of Th2/Th1 (IL-4/IFN-γ) cytokine mRNA and low levels of mRNA coding for IL-10 and IL-2. These results suggest that reduction of the immunosuppressive environment takes place in vaccinated as well as immunotreated mice, and a shift towards a Th1 type of immune response may be responsible for the observed increased restriction of parasite growth. The present study provides the first evidence that active immunotherapy may present a sustainable route for the control of AE. PMID:26053794

  3. Assessing the environmental performance of construction materials testing using EMS: An Australian study.

    PubMed

    Dejkovski, Nick

    2016-10-01

    This paper reports the audit findings of the waste management practices at 30 construction materials testing (CMT) laboratories (constituting 4.6% of total accredited CMT laboratories at the time of the audit) that operate in four Australian jurisdictions and assesses the organisation's Environmental Management System (EMS) for indicators of progress towards sustainable development (SD). In Australia, waste indicators are 'priority indicators' of environmental performance yet the quality and availability of waste data is poor. National construction and demolition waste (CDW) data estimates are not fully disaggregated and the contribution of CMT waste (classified as CDW) to the national total CDW landfill burden is difficult to quantify. The environmental and human impacts of anthropogenic release of hazardous substances contained in CMT waste into the ecosphere can be measured by construing waste indicators from the EMS. An analytical framework for evaluating the EMS is developed to elucidate CMT waste indicators and assess these indicators against the principle of proportionality. Assessing against this principle allows for: objective evaluations of whether the environmental measures prescribed in the EMS are 'proportionate' to the 'desired' (subjective) level of protection chosen by decision-makers; and benchmarking CMT waste indicators against aspirational CDW targets set by each Australian jurisdiction included in the audit. Construed together, the EMS derived waste indicators and benchmark data provide a composite indicator of environmental performance and progress towards SD. The key audit findings indicate: CMT laboratories have a 'poor' environmental performance (and overall progress towards SD) when EMS waste data are converted into indicator scores and assessed against the principle of proportionality; CMT waste recycling targets are lower when benchmarked against jurisdictional CDW waste recovery targets; and no significant difference in the average

  4. Cystatin E/M Suppresses Tumor Cell Growth through Cytoplasmic Retention of NF-κB

    PubMed Central

    Soh, Hendrick; Venkatesan, Natarajan; Veena, Mysore S.; Ravichandran, Sandhiya; Zinabadi, Alborz; Basak, Saroj K.; Parvatiyar, Kislay; Srivastava, Meera; Liang, Li-Jung; Gjertson, David W.; Torres, Jorge Z.; Moatamed, Neda A.

    2016-01-01

    We and others have shown that the cystatin E/M gene is inactivated in primary human tumors, pointing to its role as a tumor suppressor gene. However, the molecular mechanism of tumor suppression is not yet understood. Using plasmid-directed cystatin E/M gene overexpression, a lentivirus-mediated tetracycline-inducible vector system, and human papillomavirus 16 (HPV 16) E6 and E7 gene-immortalized normal human epidermal keratinocytes, we demonstrated intracellular and non-cell-autonomous apoptotic growth inhibition of tumor cell lines and that growth inhibition is associated with cytoplasmic retention of NF-κB. We further demonstrated decreased phosphorylation of IκB kinase (IKKβ) and IκBα in the presence of tumor necrosis factor alpha (TNF-α), confirming the role of cystatin E/M in the regulation of the NF-κB signaling pathway. Growth suppression of nude mouse xenograft tumors carrying a tetracycline-inducible vector system was observed with the addition of doxycycline in drinking water, confirming that the cystatin E/M gene is a tumor suppressor gene. Finally, immunohistochemical analyses of cervical carcinoma in situ and primary tumors have shown a statistically significant inverse relationship between the expression of cystatin E/M and cathepsin L and a direct relationship between the loss of cystatin E/M expression and nuclear expression of NF-κB. We therefore propose that the cystatin E/M suppressor gene plays an important role in the regulation of NF-κB. PMID:27090639

  5. An EM algorithm for estimating SPECT emission and transmission parameters from emissions data only.

    PubMed

    Krol, A; Bowsher, J E; Manglos, S H; Feiglin, D H; Tornai, M P; Thomas, F D

    2001-03-01

    A maximum-likelihood (ML) expectation-maximization (EM) algorithm (called EM-IntraSPECT) is presented for simultaneously estimating single photon emission computed tomography (SPECT) emission and attenuation parameters from emission data alone. The algorithm uses the activity within the patient as transmission tomography sources, with which attenuation coefficients can be estimated. For this initial study, EM-IntraSPECT was tested on computer-simulated attenuation and emission maps representing a simplified human thorax as well as on SPECT data obtained from a physical phantom. Two evaluations were performed. First, to corroborate the idea of reconstructing attenuation parameters from emission data, attenuation parameters (mu) were estimated with the emission intensities (lambda) fixed at their true values. Accurate reconstructions of attenuation parameters were obtained. Second, emission parameters lambda and attenuation parameters mu were simultaneously estimated from the emission data alone. In this case there was crosstalk between estimates of lambda and mu and final estimates of lambda and mu depended on initial values. Estimates degraded significantly as the support extended out farther from the body, and an explanation for this is proposed. In the EM-IntraSPECT reconstructed attenuation images, the lungs, spine, and soft tissue were readily distinguished and had approximately correct shapes and sizes. As compared with standard EM reconstruction assuming a fix uniform attenuation map, EM-IntraSPECT provided more uniform estimates of cardiac activity in the physical phantom study and in the simulation study with tight support, but less uniform estimates with a broad support. The new EM algorithm derived here has additional applications, including reconstructing emission and transmission projection data under a unified statistical model.

  6. Methicillin-resistant Staphylococcus aureus in Ohio EMS Providers: A Statewide Cross-sectional Study.

    PubMed

    Orellana, Robert C; Hoet, Armando E; Bell, Christopher; Kelley, Christina; Lu, Bo; Anderson, Sarah E; Stevenson, Kurt B

    2016-01-01

    The objective was to determine the nasal carriage prevalence of methicillin-resistant Staphylococcus aureus (MRSA) among emergency medical service (EMS) personnel and the associated risk factors. A cross-sectional study was conducted among Ohio EMS personnel randomly sampled from 84 urban and rural agencies. Surveys assessing demographics, occupational history, health, cohabitation status, and hygiene practice were collected with nasal swabs from those who enrolled. Survey weight adjusted analysis was performed (1) to estimate MRSA nasal carriage prevalence of Ohio EMS providers, and (2) to identify variables associated with MRSA. MRSA was detected in 4.6% (13/280) EMS personnel sampled. After employing a survey-weighted analysis the following risk factors associated with MRSA carriage were identified: those who did not practice frequent hand hygiene after glove use (OR, 10.51; 95% CI, 2.54-43.45; P = 0.0012), living with someone with a recent staphylococcal infection (OR, 9.02; 95% CI, 1.03-78.98; P = 0.0470), and individuals with low frequency of hand washing (< 8 times per shift) (OR, 4.20; 95% CI 1.02-17.27; P = 0.0468). An additional risk factor identified through the logistic regression analysis on the study population was EMS workers with an open wound or skin infection (OR, 6.75; 95% CI, 1.25-36.36; P = 0.0262). However, this was not significant in the survey-weighted analysis. The high prevalence of MRSA in Ohio EMS personnel is both an occupational hazard and patient safety concern. Implementing methods to reinforce CDC guidelines for proper hygiene could decrease MRSA found in the EMS setting. Previous literature suggests that a reduction in MRSA colonization can lead to decreases in transmission and improved health for both patients and personnel.

  7. National Prehospital Evidence-Based Guidelines Strategy: A Summary for EMS Stakeholders.

    PubMed

    Martin-Gill, Christian; Gaither, Joshua B; Bigham, Blair L; Myers, J Brent; Kupas, Douglas F; Spaite, Daniel W

    2016-01-01

    Multiple national organizations have recommended and supported a national investment to increase the scientific evidence available to guide patient care delivered by Emergency Medical Services (EMS) and incorporate that evidence directly into EMS systems. Ongoing efforts seek to develop, implement, and evaluate prehospital evidence-based guidelines (EBGs) using the National Model Process created by a multidisciplinary panel of experts convened by the Federal Interagency Committee on EMS (FICEMS) and the National EMS Advisory Council (NEMSAC). Yet, these and other EBG efforts have occurred in relative isolation, with limited direct collaboration between national projects, and have experienced challenges in implementation of individual guidelines. There is a need to develop sustainable relationships among stakeholders that facilitate a common vision that facilitates EBG efforts. Herein, we summarize a National Strategy on EBGs developed by the National Association of EMS Physicians (NAEMSP) with involvement of 57 stakeholder organizations, and with the financial support of the National Highway Traffic Safety Administration (NHTSA) and the EMS for Children program. The Strategy proposes seven action items that support collaborative efforts in advancing prehospital EBGs. The first proposed action is creation of a Prehospital Guidelines Consortium (PGC) representing national medical and EMS organizations that have an interest in prehospital EBGs and their benefits to patient outcomes. Other action items include promoting research that supports creation and evaluates the impact of EBGs, promoting the development of new EBGs through improved stakeholder collaboration, and improving education on evidence-based medicine for all prehospital providers. The Strategy intends to facilitate implementation of EBGs by improving guideline dissemination and incorporation into protocols, and seeks to establish standardized evaluation methods for prehospital EBGs. Finally, the Strategy

  8. EM-54 Technology Development In Situ Remediation Integrated Program. Annual report

    SciTech Connect

    Not Available

    1993-08-01

    The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years.

  9. Over one-half billion years of head conservation? Expression of an ems class gene in Hydractinia symbiolongicarpus (Cnidaria: Hydrozoa)

    PubMed Central

    Mokady, Ofer; Dick, Matthew H.; Lackschewitz, Dagmar; Schierwater, Bernd; Buss, Leo W.

    1998-01-01

    We report the isolation of an empty spiracles class homeodomain-containing gene, Cn-ems, from the hydrozoan Hydractinia symbiolongicarpus, the first gene of this class characterized in a lower metazoan. Cn-ems was found to be expressed in the head of gastrozooids, specifically in endodermal epithelial cells of the taeniolae of the hypostome. Cn-ems is not expressed in gonozooids, which lack taeniolae. Experimental conversion of the posterior region of the planula larva into head structures up-regulates expression of the gene. These findings establish that the association of ems-class genes with head structures preceded the evolution of bilateral symmetry. PMID:9520424

  10. Rock 'Em, Sock 'Em!

    ERIC Educational Resources Information Center

    Waters, John K.

    2011-01-01

    K-12-level competitive robotics is growing in popularity around the country and worldwide. According to one of the leading organizers of these events, FIRST--For Inspiration and Recognition of Science and Technology--250,000 students from 56 countries take part in its competitions. FIRST Tech Challenge (FTC) is a yearly event the organization puts…

  11. Rock 'Em, Sock 'Em!

    ERIC Educational Resources Information Center

    Waters, John K.

    2011-01-01

    K-12-level competitive robotics is growing in popularity around the country and worldwide. According to one of the leading organizers of these events, FIRST--For Inspiration and Recognition of Science and Technology--250,000 students from 56 countries take part in its competitions. FIRST Tech Challenge (FTC) is a yearly event the organization puts…

  12. emMAW: computing minimal absent words in external memory.

    PubMed

    Héliou, Alice; Pissis, Solon P; Puglisi, Simon J

    2017-09-01

    The biological significance of minimal absent words has been investigated in genomes of organisms from all domains of life. For instance, three minimal absent words of the human genome were found in Ebola virus genomes. There exists an O(n) -time and O(n) -space algorithm for computing all minimal absent words of a sequence of length n on a fixed-sized alphabet based on suffix arrays. A standard implementation of this algorithm, when applied to a large sequence of length n , requires more than 20 n  bytes of RAM. Such memory requirements are a significant hurdle to the computation of minimal absent words in large datasets. We present emMAW, the first external-memory algorithm for computing minimal absent words. A free open-source implementation of our algorithm is made available. This allows for computation of minimal absent words on far bigger data sets than was previously possible. Our implementation requires less than 3 h on a standard workstation to process the full human genome when as little as 1 GB of RAM is made available. We stress that our implementation, despite making use of external memory, is fast; indeed, even on relatively smaller datasets when enough RAM is available to hold all necessary data structures, it is less than two times slower than state-of-the-art internal-memory implementations. https://github.com/solonas13/maw (free software under the terms of the GNU GPL). alice.heliou@lix.polytechnique.fr or solon.pissis@kcl.ac.uk. Supplementary data are available at Bioinformatics online.

  13. Elimination of error factors, affecting EM and seismic inversions

    NASA Astrophysics Data System (ADS)

    Magomedov, M.; Zuev, M. A.; Korneev, V. A.; Goloshubin, G.; Zuev, J.; Brovman, Y.

    2013-12-01

    EM or seismic data inversions are affected by many factors, which may conceal the responses from target objects. We address here the contributions from the following effects: 1) Pre-survey spectral sensitivity factor. Preliminary information about a target layer can be used for a pre-survey estimation of the required frequency domain and signal level. A universal approach allows making such estimations in real time, helping the survey crew to optimize an acquisition process. 2) Preliminary velocities' identification and their dispersions for all the seismic waves, arising in a stratified media became a fast working tool, based on the exact analytical solution. 3) Vertical gradients effect. For most layers the log data scatter, requiring an averaging pattern. A linear gradient within each representative layer is a reasonable compromise between required inversion accuracy and forward modeling complexity. 4) An effect from the seismic source's radial component becomes comparable with vertical part for explosive sources. If this effect is not taken into account, a serious modeling error takes place. This problem has an algorithmic solution. 5) Seismic modeling is often based on different representations for a source formulated either for a force or to a potential. The wave amplitudes depend on the formulation, making an inversion result sensitive to it. 6) Asymmetrical seismic waves (modified Rayleigh) in symmetrical geometry around liquid fracture come from S-wave and merge with the modified Krauklis wave at high frequencies. A detail analysis of this feature allows a spectral range optimization for the proper wave's extraction. 7) An ultrasonic experiment was conducted to show different waves appearance for a super-thin water-saturated fracture between two Plexiglas plates, being confirmed by comparison with theoretical computations. 8) A 'sandwich effect' was detected by comparison with averaged layer's effect. This opens an opportunity of the shale gas direct

  14. An EM algorithm for mapping segregation distortion loci.

    PubMed

    Zhu, Chengsong; Zhang, Yuan-Ming

    2007-11-29

    Chromosomal region that causes distorted segregation ratios is referred to as segregation distortion locus (SDL). The distortion is caused either by differential representation of SDL genotypes in gametes before fertilization or by viability differences of SDL genotypes after fertilization but before genotype scoring. In both cases, observable phenotypes are distorted for marker loci in the chromosomal region close to the SDL. Under the quantitative genetics model for viability selection by proposing a continuous liability controlling the viability of individual, a simplex algorithm has been used to search for the solution in SDL mapping. However, they did not consider the effects of SDL on the construction of linkage maps. We proposed a multipoint maximum-likelihood method to estimate the position and the effects of SDL under the liability model together with both selection coefficients of marker genotypes and recombination fractions. The method was implemented via an expectation and maximization (EM) algorithm. The superiority of the method proposed under the liability model over the previous methods was verified by a series of Monte Carlo simulation experiments, together with a working example derived from the MAPMAKER/QTL software. Our results suggested that the new method can serve as a powerful alternative to existing methods for SDL mapping. Under the liability model, the new method can simultaneously estimate the position and the effects of SDL as well as the recombinant fractions between adjacent markers, and also be used to probe into the genetic mechanism for the bias of uncorrected map distance and to elucidate the relationship between the viability selection and genetic linkage.

  15. Does contamination buildup limit throughput for automated cryoEM?

    PubMed

    Cheng, Anchi; Fellmann, Denis; Pulokas, James; Potter, Clinton S; Carragher, Bridget

    2006-06-01

    The development of automated systems for data acquisition in cryo electron microscopy has enabled the possibility of acquiring very large number of images from a single specimen grid. We have demonstrated that over images of 250,000 single particles can be acquired in a 24 h period. This has raised questions as to whether contamination buildup on the specimen limits the quality of the data that can be acquired during these long duration experiments and also whether the data acquisition session could be extended to allow acquisition of more than 1,000,000 particles. We report here a systematic characterization of contamination of specimens maintained for long periods of time at liquid nitrogen temperatures using standard side entry cryo stages. As part of this characterization we developed a more reliable method for accurately estimating specimen ice thickness. Using the method, we were able to calibrate image contrast against ice thickness under a variety of magnifications, objective aperture positions, and defoci, and demonstrated the strong dependence of the calibration curve on these parameters. The results show the anti-contamination aperture is, as expected, critical to the prevention of contamination and that loading film into the microscope dramatically increases the contamination rate, particularly in the first 3 h after the insertion of the film box. In the absence of film, we were able to reproducibly demonstrate that the contamination rate can be limited to a rate of approximately 1 angstrom/h providing reassurance that contamination will not be a major limiting factor for long term cryoEM experiments if a CCD camera is used for the imaging.

  16. Association of Burnout with Workforce-Reducing Factors among EMS Professionals.

    PubMed

    Crowe, Remle P; Bower, Julie K; Cash, Rebecca E; Panchal, Ashish R; Rodriguez, Severo A; Olivo-Marston, Susan E

    2017-08-25

    Emergency medical services (EMS) professionals often work long hours at multiple jobs and endure frequent exposure to traumatic events. The stressors inherent to the prehospital setting may increase the likelihood of experiencing burnout and lead providers to exit the profession, representing a serious workforce and public health concern. Our objectives were to estimate the prevalence of burnout, identify characteristics associated with experiencing burnout, and quantify its relationship with factors that negatively impact EMS workforce stability, namely sickness absence and turnover intentions. A random sample of 10,620 emergency medical technicians (EMTs) and 10,540 paramedics was selected from the National EMS Certification database to receive an electronic questionnaire between October, 2015 and November, 2015. Using the validated Copenhagen Burnout Inventory (CBI), we assessed burnout across three dimensions: personal, work-related, and patient-related. We used multivariable logistic regression modeling to identify burnout predictors and quantify the association between burnout and our workforce-related outcomes: reporting ten or more days of work absence due to personal illness in the past 12 months, and intending to leave an EMS job or the profession within the next 12 months. Burnout was more prevalent among paramedics than EMTs (personal: 38.3% vs. 24.9%, work-related: 30.1% vs. 19.1%, and patient-related: 14.4% vs. 5.5%). Variables associated with increased burnout in all dimensions included certification at the paramedic level, having between five and 15 years of EMS experience, and increased weekly call volume. After adjustment, burnout was associated with over a two-fold increase in odds of reporting ten or more days of sickness absence in the past year. Burnout was associated with greater odds of intending to leave an EMS job (personal OR:2.45, 95% CI:1.95-3.06, work-related OR:3.37, 95% CI:2.67-4.26, patient-related OR: 2.38, 95% CI:1.74-3.26) or

  17. Pre-flight risk assessment in Emergency Medical Service (EMS) helicopters

    NASA Technical Reports Server (NTRS)

    Shively, R. J.

    1992-01-01

    The Emergency Medical Service (EMS) industry has been the subject of several television and newspaper articles (Harvey and Jensen, 1987) which emphasized the negative aspects, (e.g., fatalities and high accident rates), rather than the life saving services performed. Until recently, the accident rate of the EMS industry has been five times as high as that of other civil helicopters. This high accident rate has been coupled with the dramatic rise in the number of programs. The industry has built from a single service at its inception in 1972, to over 180 in 1987 (Spray, 1987), to the point that 93 percent of the contiguous U.S. is now covered by some type of EMS service. These factors prompted the National Transportation Safety Board (NTSB) to study the accidents that occurred between May 11, 1978 and December 3, 1986 (NTSB, 1988). The NTSB report concluded that 'Sound pilot judgment is central to safe flight operations.' They further stated that '... factors unique to EMS helicopter operations--such as the influence of the mission itself, program competition, and EMS program management perspectives--can drastically influence pilot judgment during the EMS mission.' One of the most difficult decisions that a pilot must make is whether to accept or decline a mission. A pre-flight risk assessment system (SAFE) was developed at NASA-Ames Research Center for civil EMS operations to aid pilots in making this decision objectively. The ability of the SAFE system to predict mission risk profiles was tested at an EMS facility. The results of this field study demonstrated that the usefulness of SAFE was highly dependent on the type of mission flown. SAFE is now being modified so that it can 'learn' with each mission flown. For example, after flying a mission to a particular site, an EMS pilot would input information about this mission into the system, such as new buildings, wires, or approach procedures. Then, the next time a pilot flew a similar mission or one to the same

  18. Pre-flight risk assessment in Emergency Medical Service (EMS) helicopters

    NASA Technical Reports Server (NTRS)

    Shively, R. J.

    1992-01-01

    The Emergency Medical Service (EMS) industry has been the subject of several television and newspaper articles (Harvey and Jensen, 1987) which emphasized the negative aspects, (e.g., fatalities and high accident rates), rather than the life saving services performed. Until recently, the accident rate of the EMS industry has been five times as high as that of other civil helicopters. This high accident rate has been coupled with the dramatic rise in the number of programs. The industry has built from a single service at its inception in 1972, to over 180 in 1987 (Spray, 1987), to the point that 93 percent of the contiguous U.S. is now covered by some type of EMS service. These factors prompted the National Transportation Safety Board (NTSB) to study the accidents that occurred between May 11, 1978 and December 3, 1986 (NTSB, 1988). The NTSB report concluded that 'Sound pilot judgment is central to safe flight operations.' They further stated that '... factors unique to EMS helicopter operations--such as the influence of the mission itself, program competition, and EMS program management perspectives--can drastically influence pilot judgment during the EMS mission.' One of the most difficult decisions that a pilot must make is whether to accept or decline a mission. A pre-flight risk assessment system (SAFE) was developed at NASA-Ames Research Center for civil EMS operations to aid pilots in making this decision objectively. The ability of the SAFE system to predict mission risk profiles was tested at an EMS facility. The results of this field study demonstrated that the usefulness of SAFE was highly dependent on the type of mission flown. SAFE is now being modified so that it can 'learn' with each mission flown. For example, after flying a mission to a particular site, an EMS pilot would input information about this mission into the system, such as new buildings, wires, or approach procedures. Then, the next time a pilot flew a similar mission or one to the same

  19. Single-Particle Cryo-EM of the Ryanodine Receptor Channel in an Aqueous Environment

    PubMed Central

    Baker, Mariah R.; Fan, Guizhen

    2015-01-01

    Ryanodine receptors (RyRs) are tetrameric ligand-gated Ca2+ release channels that are responsible for the increase of cytosolic Ca2+ concentration leading to muscle contraction. Our current understanding of RyR channel gating and regulation is greatly limited due to the lack of a high-resolution structure of the channel protein. The enormous size and unwieldy shape of Ca2+ release channels make X-ray or NMR methods difficult to apply for high-resolution structural analysis of the full-length functional channel. Single-particle electron cryo-microscopy (cryo-EM) is one of the only effective techniques for the study of such a large integral membrane protein and its molecular interactions. Despite recent developments in cryo-EM technologies and break-through single-particle cryo-EM studies of ion channels, cryospecimen preparation, particularly the presence of detergent in the buffer, remains the main impediment to obtaining atomic-resolution structures of ion channels and a multitude of other integral membrane protein complexes. In this review we will discuss properties of several detergents that have been successfully utilized in cryo-EM studies of ion channels and the emergence of the detergent alternative amphipol to stabilize ion channels for structure-function characterization. Future structural studies of challenging specimen like ion channels are likely to be facilitated by cryo-EM amenable detergents or alternative surfactants. PMID:26913144

  20. Single-particle cryo-EM of the ryanodine receptor channel in an aqueous environment

    PubMed Central

    Baker, Mariah R.; Fan, Guizhen; Serysheva, Irina I.

    2015-01-01

    Ryanodine receptors (RyRs) are tetrameric ligand-gated Ca2+ release channels that are responsible for the increase of cytosolic Ca2+ concentration leading to muscle contraction. Our current understanding of RyR channel gating and regulation is greatly limited due to the lack of a high-resolution structure of the channel protein. The enormous size and unwieldy shape of Ca2+ release channels make X-ray or NMR methods difficult to apply for high-resolution structural analysis of the full-length functional channel. Single-particle electron cryo-microscopy (cryo-EM) is one of the only effective techniques for the study of such a large integral membrane protein and its molecular interactions. Despite recent developments in cryo-EM technologies and break-through single-particle cryo-EM studies of ion channels, cryospecimen preparation, particularly the presence of detergent in the buffer, remains the main impediment to obtaining atomic-resolution structures of ion channels and a multitude of other integral membrane protein complexes. In this review we will discuss properties of several detergents that have been successfully utilized in cryo-EM studies of ion channels and the emergence of the detergent alternative amphipol to stabilize ion channels for structure-function characterization. Future structural studies of challenging specimen like ion channels are likely to be facilitated by cryo-EM amenable detergents or alternative surfactants. PMID:25844145

  1. dbEM: A database of epigenetic modifiers curated from cancerous and normal genomes.

    PubMed

    Singh Nanda, Jagpreet; Kumar, Rahul; Raghava, Gajendra P S

    2016-01-18

    We have developed a database called dbEM (database of Epigenetic Modifiers) to maintain the genomic information of about 167 epigenetic modifiers/proteins, which are considered as potential cancer targets. In dbEM, modifiers are classified on functional basis and comprise of 48 histone methyl transferases, 33 chromatin remodelers and 31 histone demethylases. dbEM maintains the genomic information like mutations, copy number variation and gene expression in thousands of tumor samples, cancer cell lines and healthy samples. This information is obtained from public resources viz. COSMIC, CCLE and 1000-genome project. Gene essentiality data retrieved from COLT database further highlights the importance of various epigenetic proteins for cancer survival. We have also reported the sequence profiles, tertiary structures and post-translational modifications of these epigenetic proteins in cancer. It also contains information of 54 drug molecules against different epigenetic proteins. A wide range of tools have been integrated in dbEM e.g. Search, BLAST, Alignment and Profile based prediction. In our analysis, we found that epigenetic proteins DNMT3A, HDAC2, KDM6A, and TET2 are highly mutated in variety of cancers. We are confident that dbEM will be very useful in cancer research particularly in the field of epigenetic proteins based cancer therapeutics. This database is available for public at URL: http://crdd.osdd.net/raghava/dbem.

  2. Incubator embedded cell culture imaging system (EmSight) based on Fourier ptychographic microscopy

    PubMed Central

    Kim, Jinho; Henley, Beverley M.; Kim, Charlene H.; Lester, Henry A.; Yang, Changhuei

    2016-01-01

    Multi-day tracking of cells in culture systems can provide valuable information in bioscience experiments. We report the development of a cell culture imaging system, named EmSight, which incorporates multiple compact Fourier ptychographic microscopes with a standard multiwell imaging plate. The system is housed in an incubator and presently incorporates six microscopes. By using the same low magnification objective lenses as the objective and the tube lens, the EmSight is configured as a 1:1 imaging system that, providing large field-of-view (FOV) imaging onto a low-cost CMOS imaging sensor. The EmSight improves the image resolution by capturing a series of images of the sample at varying illumination angles; the instrument reconstructs a higher-resolution image by using the iterative Fourier ptychographic algorithm. In addition to providing high-resolution brightfield and phase imaging, the EmSight is also capable of fluorescence imaging at the native resolution of the objectives. We characterized the system using a phase Siemens star target, and show four-fold improved coherent resolution (synthetic NA of 0.42) and a depth of field of 0.2 mm. To conduct live, long-term dopaminergic neuron imaging, we cultured ventral midbrain from mice driving eGFP from the tyrosine hydroxylase promoter. The EmSight system tracks movements of dopaminergic neurons over a 21 day period. PMID:27570701

  3. Cryo-EM studies of the structure and dynamics of vacuolar-type ATPases

    PubMed Central

    Mazhab-Jafari, Mohammad T.; Rubinstein, John L.

    2016-01-01

    Electron cryomicroscopy (cryo-EM) has significantly advanced our understanding of molecular structure in biology. Recent innovations in both hardware and software have made cryo-EM a viable alternative for targets that are not amenable to x-ray crystallography or nuclear magnetic resonance (NMR) spectroscopy. Cryo-EM has even become the method of choice in some situations where x-ray crystallography and NMR spectroscopy are possible but where cryo-EM can determine structures at higher resolution or with less time or effort. Rotary adenosine triphosphatases (ATPases) are crucial to the maintenance of cellular homeostasis. These enzymes couple the synthesis or hydrolysis of adenosine triphosphate to the use or production of a transmembrane electrochemical ion gradient, respectively. However, the membrane-embedded nature and conformational heterogeneity of intact rotary ATPases have prevented their high-resolution structural analysis to date. Recent application of cryo-EM methods to the different types of rotary ATPase has led to sudden advances in understanding the structure and function of these enzymes, revealing significant conformational heterogeneity and characteristic transmembrane α helices that are highly tilted with respect to the membrane. In this Review, we will discuss what has been learned recently about rotary ATPase structure and function, with a particular focus on the vacuolar-type ATPases. PMID:27532044

  4. dbEM: A database of epigenetic modifiers curated from cancerous and normal genomes

    NASA Astrophysics Data System (ADS)

    Singh Nanda, Jagpreet; Kumar, Rahul; Raghava, Gajendra P. S.

    2016-01-01

    We have developed a database called dbEM (database of Epigenetic Modifiers) to maintain the genomic information of about 167 epigenetic modifiers/proteins, which are considered as potential cancer targets. In dbEM, modifiers are classified on functional basis and comprise of 48 histone methyl transferases, 33 chromatin remodelers and 31 histone demethylases. dbEM maintains the genomic information like mutations, copy number variation and gene expression in thousands of tumor samples, cancer cell lines and healthy samples. This information is obtained from public resources viz. COSMIC, CCLE and 1000-genome project. Gene essentiality data retrieved from COLT database further highlights the importance of various epigenetic proteins for cancer survival. We have also reported the sequence profiles, tertiary structures and post-translational modifications of these epigenetic proteins in cancer. It also contains information of 54 drug molecules against different epigenetic proteins. A wide range of tools have been integrated in dbEM e.g. Search, BLAST, Alignment and Profile based prediction. In our analysis, we found that epigenetic proteins DNMT3A, HDAC2, KDM6A, and TET2 are highly mutated in variety of cancers. We are confident that dbEM will be very useful in cancer research particularly in the field of epigenetic proteins based cancer therapeutics. This database is available for public at URL: http://crdd.osdd.net/raghava/dbem.

  5. Incubator embedded cell culture imaging system (EmSight) based on Fourier ptychographic microscopy.

    PubMed

    Kim, Jinho; Henley, Beverley M; Kim, Charlene H; Lester, Henry A; Yang, Changhuei

    2016-08-01

    Multi-day tracking of cells in culture systems can provide valuable information in bioscience experiments. We report the development of a cell culture imaging system, named EmSight, which incorporates multiple compact Fourier ptychographic microscopes with a standard multiwell imaging plate. The system is housed in an incubator and presently incorporates six microscopes. By using the same low magnification objective lenses as the objective and the tube lens, the EmSight is configured as a 1:1 imaging system that, providing large field-of-view (FOV) imaging onto a low-cost CMOS imaging sensor. The EmSight improves the image resolution by capturing a series of images of the sample at varying illumination angles; the instrument reconstructs a higher-resolution image by using the iterative Fourier ptychographic algorithm. In addition to providing high-resolution brightfield and phase imaging, the EmSight is also capable of fluorescence imaging at the native resolution of the objectives. We characterized the system using a phase Siemens star target, and show four-fold improved coherent resolution (synthetic NA of 0.42) and a depth of field of 0.2 mm. To conduct live, long-term dopaminergic neuron imaging, we cultured ventral midbrain from mice driving eGFP from the tyrosine hydroxylase promoter. The EmSight system tracks movements of dopaminergic neurons over a 21 day period.

  6. A comparative study of the PIFA and printed monopole antenna EM absorption.

    PubMed

    Hossain, Md Ikbal; Iqbal Faruque, Mohammad Rashed; Islam, Mohammad Tariqul

    2017-02-01

    This paper represents a comparative study on electromagnetic (EM) absorption in the human head between a printed monopole antenna and a planar inverted-F antenna (PIFA). The specific absorption rate (SAR) values and total absorbed power in the human head phantom are used to evaluate EM absorption for both antennae. Moreover, antenna performances in terms of return loss, radiation efficiency, and gain are also investigated in this study. The finite integration technique (FIT) based on CST Microwave studio and SAM head phantom are used in this study. The antenna performances are measured in an anechoic chamber and the SAR is tested using COMOSAR measurement system. The obtained results indicate that the printed monopole antenna lead to higher EM absorption in the human head as compared to PIFA for both GSM frequencies.

  7. Robust estimation for class averaging in cryo-EM Single Particle Reconstruction.

    PubMed

    Huang, Chenxi; Tagare, Hemant D

    2014-01-01

    Single Particle Reconstruction (SPR) for Cryogenic Electron Microscopy (cryo-EM) aligns and averages the images extracted from micrographs to improve the Signal-to-Noise ratio (SNR). Outliers compromise the fidelity of the averaging. We propose a robust cross-correlation-like w-estimator for combating the effect of outliers on the average images in cryo-EM. The estimator accounts for the natural variation of signal contrast among the images and eliminates the need for a threshold for outlier rejection. We show that the influence function of our estimator is asymptotically bounded. Evaluations of the estimator on simulated and real cryo-EM images show good performance in the presence of outliers.

  8. Scene safety in the face of automatic weapons fire: a new dilemma for EMS?

    PubMed

    Eckstein, M; Cowen, A R

    1998-01-01

    To describe the EMS response to a large-scale shooting incident involving military-style weapons. Descriptive review. Twenty ambulances, nine engine companies, and three helicopters responded to this incident. Ten police officers and nine civilians were wounded, all of whom required transport to nearby hospitals. Two gunmen were shot and pronounced dead at the scene. No EMS personnel were injured. Incidents involving military-style weapons pose a unique challenge for prehospital care providers who must care for injured civilians and law enforcement personnel while maintaining their own safety. Use of the Incident Command System, establishment of a liaison with law enforcement, and the provision of protective gear for EMS personnel are vital to effectively and safely manage these types of incidents.

  9. Network Analysis of Students' Representation Use in Mechanics and E&M

    NASA Astrophysics Data System (ADS)

    McPadden, Daryl; Brewe, Eric

    2017-01-01

    In this study, we analyzed the representational tools that students in the Modeling Instruction-Introductory E&M (MI-E&M) course use on introductory physics problems. Representational competence is a critical skill needed for students to develop and communicate a sophisticated understanding of science topics, particularly in physics where multiple representations are often used within a single problem. The Modeling Instruction curriculum highlights representation development as a part of the modeling process, making the MI-E&M course a rich context to collect data. In the Spring 2015 and Spring 2016 semesters, over 150 students total (from 3 sections of MI-E&M) were given a survey of 25 physics problem statements both pre- and post- instruction, covering both Newtonian Mechanics and Electricity and Magnetism (E&M), and asked which representations they would use in that given situation. Using network analysis, we compare how students use representations in Mechanics and E&M contexts.

  10. EM algorithm applied for estimating non-stationary region boundaries using electrical impedance tomography

    NASA Astrophysics Data System (ADS)

    Khambampati, A. K.; Rashid, A.; Kim, B. S.; Liu, Dong; Kim, S.; Kim, K. Y.

    2010-04-01

    EIT has been used for the dynamic estimation of organ boundaries. One specific application in this context is the estimation of lung boundaries during pulmonary circulation. This would help track the size and shape of lungs of the patients suffering from diseases like pulmonary edema and acute respiratory failure (ARF). The dynamic boundary estimation of the lungs can also be utilized to set and control the air volume and pressure delivered to the patients during artificial ventilation. In this paper, the expectation-maximization (EM) algorithm is used as an inverse algorithm to estimate the non-stationary lung boundary. The uncertainties caused in Kalman-type filters due to inaccurate selection of model parameters are overcome using EM algorithm. Numerical experiments using chest shaped geometry are carried out with proposed method and the performance is compared with extended Kalman filter (EKF). Results show superior performance of EM in estimation of the lung boundary.

  11. Fabs enable single particle cryoEM studies of small proteins

    PubMed Central

    Wu, Shenping; Avila-Sakar, Agustin; Kim, JungMin; Booth, David S.; Greenberg, Charles H.; Rossi, Andrea; Liao, Maofu; Li, Xueming; Alian, Akram; Griner, Sarah L.; Juge, Narinobu; Yu, Yadong; Mergel, Claudia M.; Chaparro-Riggers, Javier; Strop, Pavel; Tampé, Robert; Edwards, Robert H.; Stroud, Robert M.; Craik, Charles S.; Cheng, Yifan

    2012-01-01

    Summary In spite of its recent achievements, the technique of single particle electron cryomicroscopy (cryoEM) has not been widely used to study proteins smaller than 100kDa, although it is a highly desirable application of this technique. One fundamental limitation is that images of small proteins embedded in vitreous ice do not contain adequate features for accurate image alignment. We describe a general strategy to overcome this limitation by selecting a fragment antigen binding (Fab) to form a stable and rigid complex with a target protein, thus providing a defined feature for accurate image alignment. Using this approach, we determined a three-dimensional structure of a ~65 kDa protein by single particle cryoEM. Because Fabs can be readily generated against a wide range of proteins by phage display, this approach is generally applicable to study many small proteins by single particle cryoEM. PMID:22483106

  12. Fabs enable single particle cryoEM studies of small proteins.

    PubMed

    Wu, Shenping; Avila-Sakar, Agustin; Kim, JungMin; Booth, David S; Greenberg, Charles H; Rossi, Andrea; Liao, Maofu; Li, Xueming; Alian, Akram; Griner, Sarah L; Juge, Narinobu; Yu, Yadong; Mergel, Claudia M; Chaparro-Riggers, Javier; Strop, Pavel; Tampé, Robert; Edwards, Robert H; Stroud, Robert M; Craik, Charles S; Cheng, Yifan

    2012-04-04

    In spite of its recent achievements, the technique of single particle electron cryomicroscopy (cryoEM) has not been widely used to study proteins smaller than 100 kDa, although it is a highly desirable application of this technique. One fundamental limitation is that images of small proteins embedded in vitreous ice do not contain adequate features for accurate image alignment. We describe a general strategy to overcome this limitation by selecting a fragment antigen binding (Fab) to form a stable and rigid complex with a target protein, thus providing a defined feature for accurate image alignment. Using this approach, we determined a three-dimensional structure of an ∼65 kDa protein by single particle cryoEM. Because Fabs can be readily generated against a wide range of proteins by phage display, this approach is generally applicable to study many small proteins by single particle cryoEM. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Direct and indirect measures of speech articulator motions using low power EM sensors

    SciTech Connect

    Barnes, T; Burnett, G; Gable, T; Holzrichter, J F; Ng, L

    1999-05-12

    Low power Electromagnetic (EM) Wave sensors can measure general properties of human speech articulator motions, as speech is produced. See Holzrichter, Burnett, Ng, and Lea, J.Acoust.Soc.Am. 103 (1) 622 (1998). Experiments have demonstrated extremely accurate pitch measurements (< 1 Hz per pitch cycle) and accurate onset of voiced speech. Recent measurements of pressure-induced tracheal motions enable very good spectra and amplitude estimates of a voiced excitation function. The use of the measured excitation functions and pitch synchronous processing enable the determination of each pitch cycle of an accurate transfer function and, indirectly, of the corresponding articulator motions. In addition, direct measurements have been made of EM wave reflections from articulator interfaces, including jaw, tongue, and palate, simultaneously with acoustic and glottal open/close signals. While several types of EM sensors are suitable for speech articulator measurements, the homodyne sensor has been found to provide good spatial and temporal resolution for several applications.

  14. Facility location: a review of context-free and EMS models.

    PubMed Central

    ReVelle, C; Bigman, D; Schilling, D; Cohon, J; Church, R

    1977-01-01

    EMS location models are those formulated to address specific problems of emergency medical services systems; context-free location models are those developed without reference to particular applications. The literature on these two types of public facility location models is reviewed, and the development of the maximal covering model from several earlier context-free models is described, with emphasis on problem statements and articulation of service objectives. An application of the maximal covering model to fire truck location points up the ability of this model to handle multiple objectives; its ability to compare alternative solutions gives it great utility for planning and evaluating EMS systems of a wide range of complexity. Potential applications of the maximal covering model are discussed regarding EMS problems involving multiple time standards and service objectives, location of special equipment, and siting of fixed facilities. PMID:885725

  15. Physics-based simulation of EM and SM in TSV-based 3D IC structures

    SciTech Connect

    Kteyan, Armen; Sukharev, Valeriy; Zschech, Ehrenfried

    2014-06-19

    Evolution of stresses in through-silicon-vias (TSVs) and in the TSV landing pad due to the stress migration (SM) and electromigration (EM) phenomena are considered. It is shown that an initial stress distribution existing in a TSV depends on its architecture and copper fill technology. We demonstrate that in the case of proper copper annealing the SM-induced redistribution of atoms results in uniform distributions of the hydrostatic stress and concentration of vacancies along each segment. In this case, applied EM stressing generates atom migration that is characterized by kinetics depending on the preexisting equilibrium concentration of vacancies. Stress-induced voiding in TSV is considered. EM induced voiding in TSV landing pad is analyzed in details.

  16. Genome Sequence of Elizabethkingia meningoseptica EM1, Isolated from a Patient with a Bloodstream Infection

    PubMed Central

    Soehnlen, Marty; Walker, Edward D.

    2016-01-01

    Elizabethkingia meningoseptica EM1 was isolated from a whole-blood sample from a female patient. The draft genome sequence of Em1 contains 4,038,467 bp, with a G+C content of 36.37%. A preliminary genome analysis showed that Em1 contains genes conferring resistance to β-lactams. The bacterium has hemolysin genes and a set of genes involved in heme uptake and heme utilization, showing its potential to cause bloodstream infections. A clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein (CRISPR/Cas) system was identified. Average nucleotide identity (ANI) analysis assigned the bacterium to the species E. meningoseptica (ANI, >95%). The annotated genome sequence provides the genetic basis for revealing its role as a pathogen in humans. PMID:27789634

  17. Next-Generation Sequencing for Identification of EMS-Induced Mutations in Caenorhabditis elegans.

    PubMed

    Lehrbach, Nicolas J; Ji, Fei; Sadreyev, Ruslan

    2017-01-05

    Forward genetic analysis using chemical mutagenesis in model organisms is a powerful tool for investigation of molecular mechanisms in biological systems. In the nematode, Caenorhabditis elegans, mutagenesis screens using ethyl methanesulfonate (EMS) have led to important insights into genetic control of animal development and physiology. A major bottleneck to this approach is identification of the causative mutation underlying a phenotype of interest. In the past, this has required time-consuming genetic mapping experiments. More recently, next-generation sequencing technologies have allowed development of new methods for rapid mapping and identification of EMS-induced lesions. In this unit we describe a protocol to map and identify EMS-induced mutations in C. elegans. © 2017 by John Wiley & Sons, Inc.

  18. EM Safety Innovations Aim Toward Safer Technologies and Better Information for Users

    SciTech Connect

    Lankford, M.; Geiger, J.; Carpenter, C.

    2002-02-26

    Beginning in 2000, the Department of Energy's Office of Environmental Management (EM), Office of Science and Technology (OST) has substantially re-examined and improved our approach to worker safety and health. Consistent with OST's responsibilities for safety, these initiatives can be categorized generally as: (1) Making our technologies inherently safer to use; and (2) Providing useful safety and health information about our technologies to the sites and technology operators. This evolved through a collaborative process by the EM Office of Safety, Health and Security, the EM Office of Science and Technology, EM Focus Areas and others. It was, initially, largely in response to a set of eight recommendations by the Environmental Management Advisory Board (EMAB) and to lessons learned from a serious accident in August, 2000 involving an OST-funded new technology. The cornerstone of this effort is the Policy for Occupational Safety and Health in EM's Science and Technology Program, issued in January 2001. DOE Focus Areas are focusing more attention on worker safety and health in their solicitations and procurement documents for new technology research and development (R&D) projects. EM Headquarters is working with Focus Areas, site environmental contractors, technology developers, and their respective DOE field organizations to ensure that roles and responsibilities for worker safety and health are clearly defined when a new technology is demonstrated at an environmental management site. The peer review process administered by the American Society of Mechanical Engineers (ASME) now requires technology developers to think through their approach to safety and health in a more detailed, focused way than previously. In Innovative Technology Summary Reports (ITSRs), developers are comparing their new technologies to baseline technologies on the basis of safety and health. Technology Safety Data Sheets (TSDSs) are being prepared for new technologies when they reach the

  19. Análise da medição do raio solar em ultravioleta

    NASA Astrophysics Data System (ADS)

    Saraiva, A. C. V.; Giménez de Castro, C. G.; Costa, J. E. R.; Selhorst, C. L.; Simões, P. J. A.

    2003-08-01

    A medição acurada do raio solar em qualquer banda do espectro eletromagnético é de relevância na formulação e calibração de modelos da estrutura e atmosfera solar. Esses modelos atribuem emissão do contínuo do Sol calmo em microondas à mesma região da linha Ha do Hell. Apresentamos a medição do raio solar em UV com imagens do EIT (Extreme Ultraviolet Image Telescope) entre 1996 e 2002, no comprimento de onda 30,9 nm (Ha do Hell), que se forma na região de transição/cromosfera solar. A técnica utilizada para o cálculo do raio UV foi baseada na transformada Wavelet B3spline. Fizemos um banco de dados com 1 imagem por dia durante o período citado. Obtivemos como resultado o raio médio da ordem de 975.61" e uma diminuição do mesmo para o período citado variando em média -0,45" /ano. Comparamos estes dados com os valores obtidos pelo ROI (Radio Observatório de Itapetinga) em 22/48 GHz e Nobeyama Radio Heliograph em 17 GHz mostrando que os raios médios são muito próximos o que indica que a região de formação nessas freqüências é a mesma conforme os modelos. Comparamos os resultados também com outros índices de atividade solar.

  20. Mass Gathering Medical Care: Resource Document for the National Association of EMS Physicians Position Statement.

    PubMed

    Schwartz, Brian; Nafziger, Sarah; Milsten, Andrew; Luk, Jeffrey; Yancey, Arthur

    2015-01-01

    Mass gatherings are heterogeneous in terms of size, duration, type of event, crowd behavior, demographics of the participants and spectators, use of recreational substances, weather, and environment. The goals of health and medical services should be the provision of care for participants and spectators consistent with local standards of care, protection of continuing medical service to the populations surrounding the event venue, and preparation for surge to respond to extraordinary events. Pre-event planning among jurisdictional public health and EMS, acute care hospitals, and event EMS is essential, but should also include, at a minimum, event security services, public relations, facility maintenance, communications technicians, and the event planners and organizers. Previous documented experience with similar events has been shown to most accurately predict future needs. Future work in and guidance for mass gathering medical care should include the consistent use and further development of universally accepted consistent metrics, such as Patient Presentation Rate and Transfer to Hospital Rate. Only by standardizing data collection can evaluations be performed that link interventions with outcomes to enhance evidence-based EMS services at mass gatherings. Research is needed to evaluate the skills and interventions required by EMS providers to achieve desired outcomes. The event-dedicated EMS Medical Director is integral to acceptable quality medical care provided at mass gatherings; hence, he/she must be included in all aspects of mass gathering medical care planning, preparations, response, and recovery. Incorporation of jurisdictional EMS and community hospital medical leadership, and emergency practitioners into these processes will ensure that on-site care, transport, and transition to acute care at appropriate receiving facilities is consistent with, and fully integrated into the community's medical care system, while fulfilling the needs of event