Science.gov

Sample records for 5mm ammonium acetate

  1. Ammonium acetate

    Integrated Risk Information System (IRIS)

    Ammonium acetate ; CASRN 631 - 61 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  2. Ammonium Acetate and Ammonium Bicarbonate in Traps for Anastrepha Fruit Flies

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fruit flies in the genus Anastrepha, especially the reproductive age females, are attracted to protein baits. Synthetic lures based on the principal components of protein degradation, especially ammonia along with acetic acid, were tested against three of the most economically important Anastrepha s...

  3. Ammonium Acetate Enhances the Attractiveness of a Variety of Protein-Based Baits to Female Ceratitis capitata (Diptera: Tephritidae).

    PubMed

    Piñero, Jaime C; Souder, Steven K; Smith, Trevor R; Fox, Abbie J; Vargas, Roger I

    2015-04-01

    Ammonia and its derivatives are used by female fruit flies (Diptera: Tephritidae) as volatile cues to locate protein-rich food needed to produce their eggs. This need for external protein sources has led to the development of behaviorally based control strategies such as food-based lures and insecticidal baits targeting pestiferous fruit fly species. In field cage studies conducted in Hawaii, we examined the behavioral response of laboratory-reared male and female Mediterranean fruit fly, Ceratitis capitata (Wiedemann), to seven commercially available protein baits and to beer waste, a relatively inexpensive and readily available substance. Each material was tested alone or in combination with either ammonium acetate or ammonium carbonate. For the majority of baits evaluated, the presence of ammonium acetate, but not ammonium carbonate, elicited a significantly greater level of response of female C. capitata compared with the protein baits alone. The addition of ammonium acetate to selected baits increased bait attractiveness to a level comparable with that elicited by the most widely used spinosad-based protein bait, GF-120. Our findings indicate that the addition of ammonium acetate to commercially available proteinaceous baits and to beer waste can greatly improve their attractiveness to C. capitata, potentially increasing the bait's effectiveness for fruit fly monitoring and suppression. PMID:26470180

  4. Distribution coefficients of purine alkaloids in water-ammonium sulfate-alkyl acetate-dialkyl phthalate systems

    NASA Astrophysics Data System (ADS)

    Korenman, Ya. I.; Krivosheeva, O. A.; Mokshina, N. Ya.

    2012-12-01

    The distribution of purine alkaloids (caffeine, theobromine, theophylline) was studied in the systems: alkyl acetates-dialkyl phtalate-salting-out agent (ammonium sulfate). The quantitative characteristics of the extraction-distribution coefficients ( D) and the degree of extraction ( R, %) are calculated. The relationships between the distribution coefficients of alkaloids and the length of the hydrocarbon radical in the molecule of alkyl acetate (dialkyl phtalate) are determined. The possibility of predicting the distribution coefficients is demonstrated.

  5. Electrodeposition of actinide compounds from an aqueous ammonium acetate matrix. Experimental development and optimization

    SciTech Connect

    Boll, Rose Ann; Matos, Milan; Torrico, Matthew N.

    2015-03-27

    Electrodeposition is a technique that is routinely employed in nuclear research for the preparation of thin solid films of actinide materials which can be used in accelerator beam bombardments, irradiation studies, or as radioactive sources. The present study investigates the deposition of both lanthanides and actinides from an aqueous ammonium acetate electrolyte matrix. Electrodepositions were performed primarily on stainless steel disks; with yield analysis evaluated using -spectroscopy. Experimental parameters were studied and modified in order to optimize the uniformity and adherence of the deposition while maximizing the yield. The initial development utilized samarium as the plating material, with and without a radioactive tracer. As a result, surface characterization studies were performed by scanning electron microscopy, electron microprobe analysis, radiographic imaging, and x-ray diffraction.

  6. Electrodeposition of actinide compounds from an aqueous ammonium acetate matrix: Experimental development and optimization

    NASA Astrophysics Data System (ADS)

    Torrico, M. N.; Boll, R. A.; Matos, M.

    2015-08-01

    Electrodeposition is a technique routinely employed in nuclear research for the preparation of thin solid films of actinide materials used in accelerator beam bombardments, irradiation studies, or as radioactive sources. This study investigates the deposition of both lanthanides and actinides from an aqueous ammonium acetate electrolyte matrix. Electrodepositions were performed primarily on stainless steel disks, with yield analysis evaluated using γ-spectroscopy. Experimental parameters (run time, current density, voltage, electrolyte concentration, and initial analyte mass) were studied and modified to optimize the uniformity and adherence of the deposition while maximizing yield. The procedure utilized samarium as the plating material, both with and without a radioactive tracer. Surface characterization studies were performed by scanning electron microscopy, electron microprobe analysis, radiographic imaging, and x-ray diffraction.

  7. Electrodeposition of actinide compounds from an aqueous ammonium acetate matrix. Experimental development and optimization

    DOE PAGESBeta

    Boll, Rose Ann; Matos, Milan; Torrico, Matthew N.

    2015-03-27

    Electrodeposition is a technique that is routinely employed in nuclear research for the preparation of thin solid films of actinide materials which can be used in accelerator beam bombardments, irradiation studies, or as radioactive sources. The present study investigates the deposition of both lanthanides and actinides from an aqueous ammonium acetate electrolyte matrix. Electrodepositions were performed primarily on stainless steel disks; with yield analysis evaluated using -spectroscopy. Experimental parameters were studied and modified in order to optimize the uniformity and adherence of the deposition while maximizing the yield. The initial development utilized samarium as the plating material, with and withoutmore » a radioactive tracer. As a result, surface characterization studies were performed by scanning electron microscopy, electron microprobe analysis, radiographic imaging, and x-ray diffraction.« less

  8. Differential responses of ammonia/ammonium-oxidizing microorganisms in mangrove sediment to amendment of acetate and leaf litter.

    PubMed

    Wang, Yong-Feng; Li, Xiao-Yan; Gu, Ji-Dong

    2014-04-01

    The effects of acetate and leaf litter powder on ammonia/ammonium-oxidizing microorganisms (AOMs) in mangrove sediment were investigated in a laboratory incubation study for a period of 60 days. The results showed that different AOMs responded differently to the addition of acetate and leaf litter. A higher diversity of anaerobic ammonium-oxidizing (anammox) bacteria was observed when acetate or leaf litter was added than the control. However, acetate and leaf litter generally inhibited the growth of anammox bacteria despite that leaf litter promoted their growth in the first 5 days. The inhibitory effects on anammox bacteria were more pronounced by acetate than by leaf litter. Neither acetate nor leaf litter affected ammonia-oxidizing archaea (AOA) community structures, but promoted their growth. For ammonia-oxidizing bacteria (AOB), the addition of acetate or leaf litter resulted in changes of community structures and promoted their growth in the early phase of the incubation. In addition, the promoting effects by leaf litter on AOB growth were more obvious than acetate. These results indicated that organic substances affect AOM community structures and abundances. The study suggests that leaf litter has an important influence on the community structures and abundances of AOMs in mangrove sediment and affects the nitrogen cycle in such ecosystem. PMID:24169949

  9. CHLORIDEDETERMINATION IN HIGH IONIC STRENGTH SOLUTION OF AMMONIUM ACETATE USING NEGATIVE ION ELECTRON SPRAY IONIZATION (HPLC/MS)

    EPA Science Inventory

    A precise ion chromatography method has been developed for the determination of chloride in high ionic strength ammonium acetate solutions (10-5 M-5 M) using sodium carbonate/sodium bicarbonate as eluent. Negative ion electrospray ionization (ESI) mass spectrometry was used for q...

  10. Precipitation of calcium carbonate from a calcium acetate and ammonium carbamate batch system

    NASA Astrophysics Data System (ADS)

    Prah, J.; Maček, J.; Dražič, G.

    2011-06-01

    In this paper, we report a novel approach for preparing precipitated calcium carbonate using solutions of ammonium carbamate and calcium acetate as the sources of calcium and carbon dioxide, respectively. Two different concentrations of the starting solutions at three different temperatures (15, 25 and 50 °C) were used for the reaction. The influence of temperature and concentration on the polymorphism and the resulting morphology of calcium carbonate are discussed. The most important parameter for controlling a particular crystal structure and precipitate morphology were the concentrations of the initial solutions. When initial solutions with lower concentrations were used, the crystal form of the precipitate changed with time. Regardless the different polymorphism at different temperatures, after one day only the calcite form was detected in all samples, regardless of at which temperature the samples were prepared. At higher concentrations, pure vaterite or a mixture of vaterite and calcite were present at the beginning of the experiment. After one day, pure vaterite was found in the samples that were prepared at 15 and 25 °C. If calcium carbonate precipitated at 50 °C, the XRD results showed a mixture of calcite and vaterite regardless of the time at which the sample was taken. The morphology of calcium carbonate particles prepared at various conditions changed from calcite cubes to spherical particles of vaterite and aragonite needles. When a low starting concentration was used, the morphology at the initial stage was strongly affected by the temperature at which the experiments were conducted. However, after one day only, cubes were present in all cases at low initial concentrations. In contrast, at high concentrations spherical particles precipitated at all three temperatures at the beginning of the reaction. Spherical particles were made up from smaller particles. Over time, the size of the particles was diminishing due to their disintegration into

  11. 40 CFR 721.8658 - Modified polymer of vinyl acetate and quaternary ammonium compound (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... quaternary ammonium compound (generic). 721.8658 Section 721.8658 Protection of Environment ENVIRONMENTAL... quaternary ammonium compound (generic). (a) Chemical substance and significant new uses subject to reporting... ammonium compound (PMN P-99-0874) is subject to reporting under this section for the significant new...

  12. 40 CFR 721.8658 - Modified polymer of vinyl acetate and quaternary ammonium compound (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... quaternary ammonium compound (generic). 721.8658 Section 721.8658 Protection of Environment ENVIRONMENTAL... quaternary ammonium compound (generic). (a) Chemical substance and significant new uses subject to reporting... ammonium compound (PMN P-99-0874) is subject to reporting under this section for the significant new...

  13. 40 CFR 721.8658 - Modified polymer of vinyl acetate and quaternary ammonium compound (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... quaternary ammonium compound (generic). 721.8658 Section 721.8658 Protection of Environment ENVIRONMENTAL... quaternary ammonium compound (generic). (a) Chemical substance and significant new uses subject to reporting... ammonium compound (PMN P-99-0874) is subject to reporting under this section for the significant new...

  14. 40 CFR 721.8658 - Modified polymer of vinyl acetate and quaternary ammonium compound (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... quaternary ammonium compound (generic). 721.8658 Section 721.8658 Protection of Environment ENVIRONMENTAL... quaternary ammonium compound (generic). (a) Chemical substance and significant new uses subject to reporting... ammonium compound (PMN P-99-0874) is subject to reporting under this section for the significant new...

  15. 40 CFR 721.8658 - Modified polymer of vinyl acetate and quaternary ammonium compound (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified polymer of vinyl acetate and... Significant New Uses for Specific Chemical Substances § 721.8658 Modified polymer of vinyl acetate and.... (1) The chemical substance identified generically as modified polymer of vinyl acetate and...

  16. Suitability of the methylene blue test for determination of cation exchange capacity of clay minerals related to ammonium acetate method

    NASA Astrophysics Data System (ADS)

    Milošević, Maja; Logar, Mihovil; Dojčinović, Biljana; Erić, Suzana

    2015-04-01

    Cation exchange capacity (CEC) represents one of the most important parameters of clay minerals which reflects their ability to exchange cations with liquid phases in near contact. Measurement of CEC is used for characterizing sample plasticity, adsorbing and swelling properties which later define their usage in industrial purposes. Several methods have been developed over the years for determination of layer charge, charge density, charge distribution, etc. and have been published in numerous papers (Czimerova et al., 2006; Yukselen and Kaya, 2008). The main goal of present study is comparison of suitability of more recent method - methylene blue test in regard to older method - ammonium acetate for determination of CEC. For this study, we selected one montmorillonite clay (Bogovina, Serbia) and two mainly kaolinite clays (Miličinica, Serbia). Chemicals used for CEC determinations were solution of methylene blue (MB)(14*10-6M/ml) and ammonium acetate (AA) solution (1M). The obtained results are showing generally lower values in case of MB method. The main difference is due to molecular aggregation of MB on the clay surface. AA method is highly sensitive to the presence of CaO. Release of Ca ion from the sample into the solution can limit the saturation of exchange sites by the ammonium ion. This is clearly visible in case of montmorillonite clay. Fe2+ and Mg ions are difficult to move by the ammonium ion because of their ion radius, but in case of MB molecule there is no such restriction in removing them from the exchange sites. MB solution, even in a low concentration (2*10-6M/ml), is showing preferable results in moving the ions from their positions which is already visible after adding a small quantity of solution (25cm3). Both MB-titration and MB-spot test yield similar results and are much simpler methods than AA and they also give other information such as specific surface area (external and internal) whereas AA method only provides information about

  17. Effect of cellulose acetate butyrate microencapsulated ammonium polyphosphate on the flame retardancy, mechanical, electrical, and thermal properties of intumescent flame-retardant ethylene-vinyl acetate copolymer/microencapsulated ammonium polyphosphate/polyamide-6 blends.

    PubMed

    Wang, Bibo; Tang, Qinbo; Hong, Ningning; Song, Lei; Wang, Lei; Shi, Yongqian; Hu, Yuan

    2011-09-01

    Ammonium polyphosphate (APP), a widely used intumescent flame retardant, has been microencapsulated by cellulose acetate butyrate with the aim of enhancing the water resistance of APP and the compatibility between the ethylene-vinyl acetate copolymer (EVA) matrix and APP. The structure of microencapsulated ammonium polyphosphate (MCAPP) was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and water contact angle (WCA). The flame retadancy and thermal stability were investigated by a limiting oxygen index (LOI) test, UL-94 test, cone calorimeter, and thermogravimetric analysis (TGA). The WCA results indicated that MCAPP has excellent water resistance and hydrophobicity. The results demonstrated that MCAPP enhanced interfacial adhesion, mechanical, electrical, and thermal stability of the EVA/MCAPP/polyamide-6 (PA-6) system. The microencapsulation not only imparted EVA/MCAPP/PA-6 with a higher LOI value and UL-94 rating but also could significantly improve the fire safety. Furthermore, the microencapsulated EVA/MCAPP/PA-6 composites can still pass the UL-94 V-0 rating after treatment with water for 3 days at 70 °C, indicating excellent water resistance. This investigation provides a promising formulation for the intumescent flame retardant EVA with excellent properties. PMID:21859130

  18. Involvement of indole-3-acetic acid produced by Azospirillum brasilense in accumulating intracellular ammonium in Chlorella vulgaris.

    PubMed

    Meza, Beatriz; de-Bashan, Luz E; Bashan, Yoav

    2015-01-01

    Accumulation of intracellular ammonium and activities of the enzymes glutamine synthetase (GS) and glutamate dehydrogenase (GDH) were measured when the microalgae Chlorella vulgaris was immobilized in alginate with either of two wild type strains of Azospirillum brasilense or their corresponding indole-3-acetic acid (IAA)-attenuated mutants. After 48 h of immobilization, both wild types induced higher levels of intracellular ammonium in the microalgae than their respective mutants; the more IAA produced, the higher the intracellular ammonium accumulated. Accumulation of intracellular ammonium in the cells of C. vulgaris followed application of four levels of exogenous IAA reported for A. brasilense and its IAA-attenuated mutants, which had a similar pattern for the first 24 h. This effect was transient and disappeared after 48 h of incubation. Immobilization of C. vulgaris with any bacteria strain induced higher GS activity. The bacterial strains also had GS activity, comparable to the activity detected in C. vulgaris, but weaker than when immobilized with the bacteria. When net activity was calculated, the wild type always induced higher GS activity than IAA-attenuated mutants. GDH activity in most microalgae/bacteria interactions resembled GS activity. When complementing IAA-attenuated mutants with exogenous IAA, GS activity in co-immobilized cultures matched those of the wild type A. brasilense immobilized with the microalga. Similarity occurred when the net GS activity was measured, and was higher with greater quantities of exogenous IAA. It is proposed that IAA produced by A. brasilense is involved in ammonium uptake and later assimilation by C. vulgaris. PMID:25554489

  19. Crystal structure of ammonium (3,5-di­chloro­phen­oxy)acetate hemihydrate

    PubMed Central

    Smith, Graham

    2015-01-01

    In the structure of the title hydrated salt, NH4 +·C8H5Cl2O3 −·0.5H2O, where the anion derives from (3,5-di­chloro­phen­oxy)acetic acid, the ammonium cation is involved in extensive N—H⋯O hydrogen bonding with both carboxyl­ate and ether O-atom acceptors giving sheet structures lying parallel to (100). The water mol­ecule of solvation lies on a crystallographic twofold rotation axis and is involved in intra-sheet O—H⋯Ocarboxyl­ate hydrogen-bonding inter­actions. In the anion, the oxoacetate side chain assumes an antiperiplanar conformation with the defining C—O—C—C torsion angle = −171.33 (15)°. PMID:26594440

  20. Both Free Indole-3-Acetic Acid and Photosynthetic Performance are Important Players in the Response of Medicago truncatula to Urea and Ammonium Nutrition Under Axenic Conditions.

    PubMed

    Esteban, Raquel; Royo, Beatriz; Urarte, Estibaliz; Zamarreño, Ángel M; Garcia-Mina, José M; Moran, Jose F

    2016-01-01

    We aimed to identify the early stress response and plant performance of Medicago truncatula growing in axenic medium with ammonium or urea as the sole source of nitrogen, with respect to nitrate-based nutrition. Biomass measurements, auxin content analyses, root system architecture (RSA) response analyses, and physiological parameters were determined. Both ammonium and ureic nutrition severely affected the RSA, resulting in changes in the main elongation rate, lateral root development, and insert position from the root base. The auxin content decreased in both urea- and ammonium-treated roots; however, only the ammonium-treated plants were affected at the shoot level. The analysis of chlorophyll a fluorescence transients showed that ammonium affected photosystem II, but urea did not impair photosynthetic activity. Superoxide dismutase isoenzymes in the plastids were moderately affected by urea and ammonium in the roots. Overall, our results showed that low N doses from different sources had no remarkable effects on M. truncatula, with the exception of the differential phenotypic root response. High doses of both ammonium and urea caused great changes in plant length, auxin contents and physiological measurements. Interesting correlations were found between the shoot auxin pool and both plant length and the "performance index" parameter, which is obtained from measurements of the kinetics of chlorophyll a fluorescence. Taken together, these data demonstrate that both the indole-3-acetic acid pool and performance index are important components of the response of M. truncatula under ammonium or urea as the sole N source. PMID:26909089

  1. Both Free Indole-3-Acetic Acid and Photosynthetic Performance are Important Players in the Response of Medicago truncatula to Urea and Ammonium Nutrition Under Axenic Conditions

    PubMed Central

    Esteban, Raquel; Royo, Beatriz; Urarte, Estibaliz; Zamarreño, Ángel M.; Garcia-Mina, José M.; Moran, Jose F.

    2016-01-01

    We aimed to identify the early stress response and plant performance of Medicago truncatula growing in axenic medium with ammonium or urea as the sole source of nitrogen, with respect to nitrate-based nutrition. Biomass measurements, auxin content analyses, root system architecture (RSA) response analyses, and physiological parameters were determined. Both ammonium and ureic nutrition severely affected the RSA, resulting in changes in the main elongation rate, lateral root development, and insert position from the root base. The auxin content decreased in both urea- and ammonium-treated roots; however, only the ammonium-treated plants were affected at the shoot level. The analysis of chlorophyll a fluorescence transients showed that ammonium affected photosystem II, but urea did not impair photosynthetic activity. Superoxide dismutase isoenzymes in the plastids were moderately affected by urea and ammonium in the roots. Overall, our results showed that low N doses from different sources had no remarkable effects on M. truncatula, with the exception of the differential phenotypic root response. High doses of both ammonium and urea caused great changes in plant length, auxin contents and physiological measurements. Interesting correlations were found between the shoot auxin pool and both plant length and the “performance index” parameter, which is obtained from measurements of the kinetics of chlorophyll a fluorescence. Taken together, these data demonstrate that both the indole-3-acetic acid pool and performance index are important components of the response of M. truncatula under ammonium or urea as the sole N source. PMID:26909089

  2. (R)-1-Phenyl­ethyl­ammonium trifluoro­acetate

    PubMed Central

    Hernández Linares, María-Guadalupe; Guerrero Luna, Gabriel; Bernès, Sylvain

    2010-01-01

    In the crystal structure of the title salt, C8H12N+·C2F3O2 −, all of the ammonium H atoms serve as donors for hydrogen bonds to carboxyl­ate O atoms, forming an R 4 3(10) ring motif based on two cations and two anions. Since both cations and anions act as inter-ion bridging groups, R(10) rings aggregate in a one-dimensional supra­molecular network by sharing the strongest N—H⋯O bond. Edge-sharing motifs lie on the twofold screw axis parallel to [010], and anti­parallel packing of these 21-column structural units results in the crystal structure. This arrangement is one of the most commonly occurring in conglomerates of chiral 1-phenyl­ethyl­amine with achiral monocarboxylic acids, confirming that these ionic salts are particularly robust supra­molecular heterosynthons useful in crystal engineering. PMID:21579169

  3. Laparoscopic 5-mm Trocar Site Herniation and Literature Review

    PubMed Central

    Minikel, Laura; Zaritsky, Eve

    2011-01-01

    Objective: To evaluate the evidence for fascial closure of 5-mm laparoscopic trocar sites. Methods: We conducted electronic database searches of PubMed and the Cochrane Library for articles published between November 2008 and December 2010. We used the keywords trocar hernia, trocar-site hernia, laparoscopic hernia, trocar port-site hernia, laparoscopic port-site hernia. Prospective and retrospective case series, randomized trials, literature reviews, and randomized animal studies of trocar hernias on abdominal wall defects from gynecologic, urologic, and general surgery literature were reviewed. The Cochrane Database was reviewed for pertinent studies. Metaanalysis was not possible due to the significant heterogeneity between studies and lack of randomized trials large enough to assess the incidence of this rare complication. Results: Trocar-site hernias are a rare but known complication of laparoscopic surgery. Trocar size ≥10mm is associated with an increased rate of hernia development. Currently, the accepted gynecologic surgical practice is closure of fascial incisions ≥10mm, while incisions <10mm do not require closure. However, large prospective and retrospective case series reports from general surgery and urology literature support nonclosure of blunt or radially dilating trocars in paramedian sites. Expert opinion and small case reports suggest that in cases of prolonged manipulation of 5-mm trocar sites the surgeon should consider fascial closure, because extension of the initial incision may have occurred. Conclusion: There is no evidence to recommend routine closure of 5-mm trocar incisions; the choice should continue to be left to the discretion of the individual surgeon. PMID:21902958

  4. Two-dimensional hydrogen-bonded polymers in the crystal structures of the ammonium salts of phen­oxy­acetic acid, (4-fluoro­phen­oxy)acetic acid and (4-chloro-2-methyl­phen­oxy)acetic acid

    PubMed Central

    Smith, Graham

    2014-01-01

    The structures of the ammonium salts of phen­oxy­acetic acid, NH4 +·C8H6O3 −, (I), (4-fluoro­phen­oxy)acetic acid, NH4 +·C8H5FO3 −, (II), and the herbicidally active (4-chloro-2-methyl­phen­oxy)acetic acid (MCPA), NH4 +·C9H8ClO3 −·0.5H2O, (III) have been determined. All have two-dimensional layered structures based on inter-species ammonium N—H⋯O hydrogen-bonding associations, which give core substructures consisting primarily of conjoined cyclic motifs. The crystals of (I) and (II) are isomorphous with the core comprising R 1 2(5), R 1 2(4) and centrosymmetric R 4 2(8) ring motifs, giving two-dimensional layers lying parallel to (100). In (III), the water mol­ecule of solvation lies on a crystallographic twofold rotation axis and bridges two carboxyl O atoms in an R 4 4(12) hydrogen-bonded motif, creating two R 4 3(10) rings, which together with a conjoined centrosymmetric R 4 2(8) ring incorporating both ammonium cations, generate two-dimensional layers lying parallel to (100). No π–π ring associations are present in any of the structures. PMID:25552984

  5. A comparative assessment of the response of three fruit fly species (Diptera: Tephritidae) to a spinosad-based bait: effect of ammonium acetate, female age, and protein hunger.

    PubMed

    Piñero, J C; Mau, R F L; Vargas, R I

    2011-08-01

    Ammonia-releasing substances are known to play an important role in fruit fly (Diptera: Tephritidae) attraction to food sources, and this information has been exploited for the development of effective synthetic food-based lures and insecticidal baits. In field studies conducted in Hawaii, we examined the behavioural response of wild female oriental fruit fly (Bactrocera dorsalis (Hendel)), melon fly (B. cucurbitae (Coquillett)), and Mediterranean fruit fly (Ceratitis capitata (Wiedemann)) to spinosad-based GF-120 NF Naturalyte Fruit Fly Bait(©) formulated to contain either 0, 1 or 2% ammonium acetate. Use of visually-attractive yellow bait stations for bait application in the field allowed for proper comparisons among bait formulations. Field cage tests were also conducted to investigate, using a comparative behavioural approach, the effects of female age and protein starvation on the subsequent response of F1 generation B. cucurbitae and B. dorsalis to the same three bait formulations that were evaluated in the field. Our field results indicate a significant positive effect of the presence, regardless of amount, of AA in GF-120 for B. dorsalis and B. cucurbitae. For C. capitata, there was a significant positive linear relationship between the relative amounts of AA in bait and female response. GF-120 with no AA was significantly more attractive to female C. capitata, but not to female B. dorsalis or B. cucurbitae, than the control treatment. Our field cage results indicate that the effects of varying amounts of AA present in GF-120 can be modulated by the physiological stage of the female flies and that the response of female B. cucurbitae to GF-120 was consistently greater than that of B. dorsalis over the various ages and levels of protein starvation regimes evaluated. Results are discussed in light of their applications for effective fruit fly suppression. PMID:20961468

  6. Mars - Subsurface properties from observed longitudinal variation of the 3.5-mm brightness temperature

    NASA Technical Reports Server (NTRS)

    Epstein, E. E.; Andrew, B. H.; Briggs, F. H.; Jakosky, B. M.; Palluconi, F. D.

    1983-01-01

    Extensive 3.5-mm measurements are reported which show a variation in the brightness temperature of Mars, with the Central Meridian Longitude that is generally in phase with the variation at 2.8 cm and is opposite in sign from the variations at 20 microns. It is pointed out that the phase result is not unexpected, since 3.5 mm is longer than the wavelength at which the phase behavior is expected to change. The result that the 3.5-mm rotation curve amplitude is larger than the amplitudes at both 20 microns and 2.8 cm, however, is unexpected. This result, it is noted, can be explained as a consequence of subsurface scattering from rocks smaller than 1.5 cm in radius. A correlation of subsurface scatterers with the location of the high-thermal inertial regions would be consistent with the hypothesis that rock abundance predominates in determining the thermal inertia.

  7. Surgical Management of Tibial Plateau Fractures With 3.5 mm Simple Plates

    PubMed Central

    Bagherifard, Abolfazl; Jabalameli, Mahmoud; Hadi, Hosseinali; Rahbar, Mohammad; Minator Sajjadi, Mohammadreza; Jahansouz, Ali; Karimi Heris, Hossein

    2016-01-01

    Background Tibial plateau fractures can be successfully fixed utilizing 3.5 mm locking plates. However, there are some disadvantages to using these plates. Objectives In the current prospective study, we investigated the outcome of treating different types of tibial plateau fractures with 3.5 mm simple plates which, to our knowledge, has not been evaluated in previous studies. Materials and Methods Between 2011 and 2013, 32 patients aged 40 ± 0.2 years underwent open reduction and internal fixation for tibial plateau fractures with 3.5 mm simple plates. The patients were followed for 16.14 ± 2.1 months. At each patient’s final visit, the articular surface depression, medial proximal tibial angle, and slope angle were measured and compared with measurements taken early after the operation. The functional outcomes were measured with the WOMAC and Lysholm knee scores. Results The mean union time was 13 ± 1.2 weeks. The mean knee range of motion was 116.8° ± 3.3°. The mean WOMAC and Lysholm scores were 83.5 ± 1.8 and 76.8 ± 1.6, respectively. On the early postoperative and final X-rays, 87.5% and 84% of patients, respectively, had acceptable reduction. Medial proximal tibial and slope angles did not change significantly by the last visit. No patient was found to have complications related to the type of plate. Conclusions In this case series study, the fixation of different types of tibial plateau fractures with 3.5 mm simple non-locking and non-precontoured plates was associated with acceptable clinical, functional, and radiographic outcomes. Based on the advantages and costs of these plates, the authors recommend using 3.5 mm simple plates for different types of tibial plateau fractures.

  8. TREATMENT OF AMMONIUM NITRATE SOLUTIONS

    DOEpatents

    Boyer, T.W.; MacHutchin, J.G.; Yaffe, L.

    1958-06-10

    The treatment of waste solutions obtained in the processing of neutron- irradiated uranium containing fission products and ammonium nitrate is described. The object of this process is to provide a method whereby the ammonium nitrate is destroyed and removed from the solution so as to permit subsequent concentration of the solution.. In accordance with the process the residual nitrate solutions are treated with an excess of alkyl acid anhydride, such as acetic anhydride. Preferably, the residual nitrate solution is added to an excess of the acetic anhydride at such a rate that external heat is not required. The result of this operation is that the ammonium nitrate and acetic anhydride react to form N/sub 2/ O and acetic acid.

  9. Low-Friction Minilaparoscopy Outperforms Regular 5-mm and 3-mm Instruments for Precise Tasks

    PubMed Central

    Firme, Wood A.; Lima, Diego L.; de Paula Lopes, Vladmir Goldstein; Montandon, Isabelle D.; Filho, Flavio Santos; Shadduck, Phillip P.

    2015-01-01

    Background and Objectives: Therapeutic laparoscopy was incorporated into surgical practice more than 25 y ago. Several modifications have since been developed to further minimize surgical trauma and improve results. Minilaparoscopy, performed with 2- to 3-mm instruments was introduced in the mid 1990s but failed to attain mainstream use, mostly because of the limitations of the early devices. Buoyed by a renewed interest, new generations of mini instruments are being developed with improved functionality and durability. This study is an objective evaluation of a new set of mini instruments with a novel low-friction design. Method: Twenty-two medical students and 22 surgical residents served as study participants. Three designs of laparoscopic instruments were evaluated: conventional 5 mm, traditional 3 mm, and low-friction 3 mm. The instruments were evaluated with a standard surgical simulator, emulating 4 exercises of various complexities, testing grasping, precise 2-handed movements, and suturing. The metric measured was time to task completion, with 5 replicates for every combination of instrument–exercise–participant. Results: For all 4 tasks, the instrument design that performed the best was the same in both the medical student and surgical resident groups. For the gross-grasping task, the 5-mm conventional instruments performed best, followed by the low-friction mini instruments. For the 3 more complex and precise tasks, the low-friction mini instruments outperformed both of the other instrument designs. Conclusion: In standard surgical simulator exercises, low-friction minilaparoscopic instruments outperformed both conventional 3- and 5-mm laparoscopic instruments for precise tasks. PMID:26390530

  10. Video-assisted thoracoscopic thymectomy using 5-mm ports and carbon dioxide insufflation.

    PubMed

    Petersen, René Horsleben

    2016-01-01

    The continuous development and refinement of minimally invasive approaches to thymectomy over the last two decades has potential benefits for patients in terms of better cosmesis, less postoperative pain, shorter length of stay, earlier return to daily activities, less bleeding and fewer complications overall with similar outcomes regarding survival, recurrence of thymoma and complete remission (CR) for myasthenia gravis patients. A variety of different approaches have been described previously. This is a detailed description of video-assisted thoracoscopic thymectomy using three 5 mm ports, carbon dioxide (CO2) insufflation and bipolar electrocoagulation (LigaSure). PMID:26904432

  11. Video-assisted thoracoscopic thymectomy using 5-mm ports and carbon dioxide insufflation

    PubMed Central

    2016-01-01

    The continuous development and refinement of minimally invasive approaches to thymectomy over the last two decades has potential benefits for patients in terms of better cosmesis, less postoperative pain, shorter length of stay, earlier return to daily activities, less bleeding and fewer complications overall with similar outcomes regarding survival, recurrence of thymoma and complete remission (CR) for myasthenia gravis patients. A variety of different approaches have been described previously. This is a detailed description of video-assisted thoracoscopic thymectomy using three 5 mm ports, carbon dioxide (CO2) insufflation and bipolar electrocoagulation (LigaSure). PMID:26904432

  12. The Intrinsic Shape of Sagittarius A* at 3.5 mm Wavelength

    NASA Astrophysics Data System (ADS)

    Ortiz-León, Gisela N.; Johnson, Michael D.; Doeleman, Sheperd S.; Blackburn, Lindy; Fish, Vincent L.; Loinard, Laurent; Reid, Mark J.; Castillo, Edgar; Chael, Andrew A.; Hernández-Gómez, Antonio; Hughes, David H.; León-Tavares, Jonathan; Lu, Ru-Sen; Montaña, Alfredo; Narayanan, Gopal; Rosenfeld, Katherine; Sánchez, David; Schloerb, F. Peter; Shen, Zhi-qiang; Shiokawa, Hotaka; SooHoo, Jason; Vertatschitsch, Laura

    2016-06-01

    The radio emission from Sgr A{}\\ast is thought to be powered by accretion onto a supermassive black hole of ∼ 4× {10}6 {M}ȯ at the Galactic Center. At millimeter wavelengths, Very Long Baseline Interferometry (VLBI) observations can directly resolve the bright innermost accretion region of Sgr A{}\\ast . Motivated by the addition of many sensitive long baselines in the north–south direction, we developed a full VLBI capability at the Large Millimeter Telescope Alfonso Serrano (LMT). We successfully detected Sgr A{}\\ast at 3.5 mm with an array consisting of six Very Long Baseline Array telescopes and the LMT. We model the source as an elliptical Gaussian brightness distribution and estimate the scattered size and orientation of the source from closure amplitude and self-calibration analysis, obtaining consistent results between methods and epochs. We then use the known scattering kernel to determine the intrinsic two-dimensional source size at 3.5 mm: (147+/- 7 μ {{as}})× (120+/- 12 μ {{as}}), at position angle 88^\\circ +/- 7^\\circ east of north. Finally, we detect non-zero closure phases on some baseline triangles, but we show that these are consistent with being introduced by refractive scattering in the interstellar medium and do not require intrinsic source asymmetry to explain.

  13. Assessing the Performance of 5mm White LED Light Sources forDeveloping-Country Applications

    SciTech Connect

    Mills, Evan

    2007-05-03

    Some white light-emitting diode (LED) light sources haverecently attained levels of efficiency and cost that allow them tocompete with fluorescent lighting for off-grid applications in thedeveloping world. Additional attributes (optics, size, ruggedness, andservice life) make them potentially superior products. Enormousreductions in energy use and greenhouse-gas emissions are thus possible,and system costs can be much lower given the ability to downsize thecharging and energy storage components compared to a fluorescentstrategy. However, there is a high risk of "market-spoiling" if inferiorproducts are introduced and result in user dissatisfaction. Completesystems involve the integration of light sources and optics, energysupply, and energy storage. A natural starting point for evaluatingproduct quality is to focus on the individual light sources. This reportdescribes testing results for batches of 10 5mm white LEDs from 26manufacturers. Efficacies and color properties are presented.

  14. Three-degree-of-freedom ultrasonic motor using a 5-mm-diameter piezoelectric ceramic tube.

    PubMed

    Mingsen Guo; Junhui Hu; Hua Zhu; Chunsheng Zhao; Shuxiang Dong

    2013-07-01

    A small three-degree-of-freedom ultrasonic motor has been developed using a simple piezoelectric lead zirconate titanate (PZT)-tube stator (OD 5 mm, ID 3 mm, length 15 mm). The stator drives a ball-rotor into rotational motion around one of three orthogonal (x-, y-, and z-) axes by combing the first longitudinal and second bending vibration modes. A motor prototype was fabricated and characterized; its performance was superior to those of previous motors made with a PZT ceramic/metal composite stator of comparable size. The method for further improving the performance was discussed. The motor can be further miniaturized and it has potential to be applied to medical microrobots, endoscopes or micro laparoscopic devices, and cell manipulation devices. PMID:25004511

  15. Absolute brightness temperature measurements at 3.5-mm wavelength. [of sun, Venus, Jupiter and Saturn

    NASA Technical Reports Server (NTRS)

    Ulich, B. L.; Rhodes, P. J.; Davis, J. H.; Hollis, J. M.

    1980-01-01

    Careful observations have been made at 86.1 GHz to derive the absolute brightness temperatures of the sun (7914 + or - 192 K), Venus (357.5 + or - 13.1 K), Jupiter (179.4 + or - 4.7 K), and Saturn (153.4 + or - 4.8 K) with a standard error of about three percent. This is a significant improvement in accuracy over previous results at millimeter wavelengths. A stable transmitter and novel superheterodyne receiver were constructed and used to determine the effective collecting area of the Millimeter Wave Observatory (MWO) 4.9-m antenna relative to a previously calibrated standard gain horn. The thermal scale was set by calibrating the radiometer with carefully constructed and tested hot and cold loads. The brightness temperatures may be used to establish an absolute calibration scale and to determine the antenna aperture and beam efficiencies of other radio telescopes at 3.5-mm wavelength.

  16. Postoperative blunt trauma to 7.5 mm scleral pocket wounds.

    PubMed

    Stevens, J D; Claoué, C M; Steele, A D

    1994-05-01

    Two patients received blunt trauma to the operated eye after phacoemulsification cataract surgery. Both patients had a three-step 7.5 mm chord width, 3.0 mm long, curving incision, extending from sclera into clear cornea. One patient had rupture of the scleral tunnel and horizontal suture 20 days after surgery. The intraocular lens was dislocated into and along the scleral tunnel. The second patient had direct trauma four days after surgery, resulting in cheese-wiring of the horizontal nylon 10-0 suture and wound leakage but no other sequelae. Blunt trauma after scleral pocket phacoemulsification cataract surgery may result in clinical wound dehiscence if sufficient force is sustained. PMID:8064613

  17. A 2.5-mm diameter probe for photoacoustic and ultrasonic endoscopy.

    PubMed

    Yang, Joon-Mo; Chen, Ruimin; Favazza, Christopher; Yao, Junjie; Li, Chiye; Hu, Zhilin; Zhou, Qifa; Shung, K Kirk; Wang, Lihong V

    2012-10-01

    We have created a 2.5-mm outer diameter integrated photo-acoustic and ultrasonic mini-probe which can be inserted into a standard video endoscope's instrument channel. A small-diameter focused ultrasonic transducer made of PMN-PT provides adequate signal sensitivity, and enables miniaturization of the probe. Additionally, this new endoscopic probe utilizes the same scanning mirror and micromotor-based built-in actuator described in our previous reports; however, the length of the rigid distal section of the new probe has been further reduced to ~35 mm. This paper describes the technical details of the mini-probe and presents experimental results that both quantify the imaging performance and demonstrate its in vivo imaging capability, which suggests that it could work as a mini-probe for certain clinical applications. PMID:23188360

  18. A 5-mm piezo-scanning fiber device for high speed ultrafast laser microsurgery

    PubMed Central

    Ferhanoglu, Onur; Yildirim, Murat; Subramanian, Kaushik; Ben-Yakar, Adela

    2014-01-01

    Towards developing precise microsurgery tools for the clinic, we previously developed image-guided miniaturized devices using low repetition rate amplified ultrafast lasers for surgery. To improve the speed of tissue removal while reducing device diameter, here we present a new 5-mm diameter device that delivers high-repetition rate laser pulses for high speed ultrafast laser microsurgery. The device consists of an air-core photonic bandgap fiber (PBF) for the delivery of high energy pulses, a piezoelectric tube actuator for fiber scanning, and two aspheric lenses for focusing the light. Its inline optical architecture provides easy alignment and substantial size reduction to 5 mm diameter as compared to our previous MEMS-scanning devices while realizing improved intensity squared (two-photon) lateral and axial resolutions of 1.16 μm and 11.46 μm, respectively. Our study also sheds light on the maximum pulse energies that can be delivered through the air-core PBF and identifies cladding damage at the input facet of the fiber as the limiting factor. We have achieved a maximum energy delivery larger than 700 nJ at 92% coupling efficiency. An in depth analysis reveals how this value is greatly affected by possible slight misalignments of the beam during coupling and the measured small beam pointing fluctuations. In the absence of these imperfections, self-phase modulation becomes the limiting factor for the maximum energy delivery, setting the theoretical upper bound to near 2 μJ for a 1-m long, 7-μm, air-core PBF. Finally, the use of a 300 kHz repetition rate fiber laser enabled rapid ablation of 150 µm x 150 µm area within only 50 ms. Such ablation speeds can now allow the surgeons to translate the surgery device as fast as ~4 mm/s to continuously remove a thin layer of a 150 µm wide tissue. Thanks to a high optical transmission efficiency of the in-line optical architecture of the device and improved resolution, we could successfully perform ablation of

  19. A 5-mm piezo-scanning fiber device for high speed ultrafast laser microsurgery.

    PubMed

    Ferhanoglu, Onur; Yildirim, Murat; Subramanian, Kaushik; Ben-Yakar, Adela

    2014-07-01

    Towards developing precise microsurgery tools for the clinic, we previously developed image-guided miniaturized devices using low repetition rate amplified ultrafast lasers for surgery. To improve the speed of tissue removal while reducing device diameter, here we present a new 5-mm diameter device that delivers high-repetition rate laser pulses for high speed ultrafast laser microsurgery. The device consists of an air-core photonic bandgap fiber (PBF) for the delivery of high energy pulses, a piezoelectric tube actuator for fiber scanning, and two aspheric lenses for focusing the light. Its inline optical architecture provides easy alignment and substantial size reduction to 5 mm diameter as compared to our previous MEMS-scanning devices while realizing improved intensity squared (two-photon) lateral and axial resolutions of 1.16 μm and 11.46 μm, respectively. Our study also sheds light on the maximum pulse energies that can be delivered through the air-core PBF and identifies cladding damage at the input facet of the fiber as the limiting factor. We have achieved a maximum energy delivery larger than 700 nJ at 92% coupling efficiency. An in depth analysis reveals how this value is greatly affected by possible slight misalignments of the beam during coupling and the measured small beam pointing fluctuations. In the absence of these imperfections, self-phase modulation becomes the limiting factor for the maximum energy delivery, setting the theoretical upper bound to near 2 μJ for a 1-m long, 7-μm, air-core PBF. Finally, the use of a 300 kHz repetition rate fiber laser enabled rapid ablation of 150 µm x 150 µm area within only 50 ms. Such ablation speeds can now allow the surgeons to translate the surgery device as fast as ~4 mm/s to continuously remove a thin layer of a 150 µm wide tissue. Thanks to a high optical transmission efficiency of the in-line optical architecture of the device and improved resolution, we could successfully perform ablation of

  20. In vitro biomechanical comparison of six different fixation methods following 5-mm sagittal split advancement osteotomies.

    PubMed

    Oguz, Y; Watanabe, E R; Reis, J M; Spin-Neto, R; Gabrielli, M A; Pereira-Filho, V A

    2015-08-01

    The sagittal split ramus osteotomy (SSRO) is a surgical technique used widely to treat many congenital and acquired mandibular discrepancies. Stabilization of the osteotomy site and the potential for skeletal relapse after the procedure are still major problems. The aim of this study was to compare the mechanical stability of six methods of rigid fixation in SSRO using a biomechanical test model. Sixty polyurethane replicas of human hemimandibles were divided into six groups. In group I, the osteotomies were fixed with two four-hole titanium miniplates; in group II, with one four-hole miniplate; in group III, with one four-hole miniplate+a bicortical screw; in group IV, with a grid miniplate; in group V, with a four-hole locking miniplate; and in group VI, with a six-hole miniplate. A linear load in the premolar region was applied to the hemimandibles. The resistance forces (N) needed to displace the distal segment by 1, 3, and 5mm were recorded and the data transmitted from the load cell to a computer. One-way analysis of variance with Tukey's post hoc test was performed to compare the means between groups. For the three displacement conditions, there was a strong tendency for the 2.0-mm plate+screw and the grid plate to have higher values. PMID:25840861

  1. High performances of very long (13.5mm) tapered laser emitting at 975 nm

    NASA Astrophysics Data System (ADS)

    Resneau, P.; Garcia, M.; Lecomte, M.; Robert, Y.; Vinet, E.; Parillaud, O.; Krakowski, M.; Boiko, D. L.

    2016-03-01

    Mode-locked semiconductor laser technology is a promising technology candidate considered by European Space Agency (ESA) for optical metrology systems and other space applications in the context of high-precision optical metrology, in particular for High Accuracy Absolute Long Distance Measurement. For these applications, we have realised a multi-section monolithic-cavity tapered laser diode with a record cavity length of 13.5 mm. The laser operates at 975 nm wavelength. It is designed for the emission of ultra-short optical pulses (<1 ps) at a repetition rate of 3 GHz with an average optical power of 600 mW. It is based on a MOVPE grown laser structure with Aluminium free active region enabling high optical gain, low internal losses and low series resistance. The first results obtained under CW pumping of such centimetre-long laser at 20 °C heatsink temperature show the lasing threshold current as low as 1.27 A and the differential external efficiency as high as 0.55 W/A.

  2. Development of a 13C-optimized 1.5-mm high temperature superconducting NMR probe

    NASA Astrophysics Data System (ADS)

    Ramaswamy, Vijaykumar; Hooker, Jerris W.; Withers, Richard S.; Nast, Robert E.; Brey, William W.; Edison, Arthur S.

    2013-10-01

    We report a 1.5-mm NMR probe based on high temperature superconductors operating at 14.1 T optimized for 13C detection. The probe has a total sample volume of about 35 microliters (μL) with an active volume of 20 μL and provides exceptional mass sensitivity for 13C detection. The probe also has excellent 1H sensitivity and employs a 2H lock; 15N irradiation capability can be added in the future. The coils are cooled to about 20 K using a standard Agilent cryogenic refrigeration system, and the sample temperature is regulated near room temperature. The coil design considerations are discussed in detail. This probe is ideal for directly detected 13C NMR experiments for natural products chemistry and metabolomics applications, for which 35 μL is an optimal sample volume. The outstanding 13C sensitivity of this probe allowed us to directly determine the 13C connectivity on 1.1 mg of natural abundance histidine using an INADEQUATE experiment. We demonstrated the utility of this probe for 13C-based metabolomics using a synthetic mixture of common natural abundance metabolites whose concentrations ranged from 1 to 5 mM (40-200 nmol).

  3. Development of a 13C-Optimized 1.5-mm High Temperature Superconducting NMR Probe

    PubMed Central

    Ramaswamy, Vijaykumar; Hooker, Jerris W.; Withers, Richard S.; Nast, Robert E.; Brey, William W.; Edison, Arthur S.

    2013-01-01

    We report a 1.5-mm NMR probe based on high temperature superconductors operating at 14.1 T optimized for 13C detection. The probe has a total sample volume of about 35 microliters (μL) with an active volume of 20 μL and provides exceptional mass sensitivity for 13C detection. The probe also has excellent 1H sensitivity and employs a 2H channel lock; 15N irradiation capability can be added in the future. The coils are cooled to about 20 K using a standard Agilent cryogenic refrigeration system, and the sample temperature is regulated near room temperature. The coil design considerations are discussed in detail. This probe is ideal for directly detected 13C NMR experiments for natural products chemistry and metabolomics applications, for which 35 μL is an optimal sample volume. The outstanding 13C sensitivity of this probe allowed us to directly determine the 13C connectivity on 1.1 mg of natural abundance histidine using an INADEQUATE experiment. We demonstrated the utility of this probe for 13C-based metabolomics using a synthetic mixture of common natural abundance metabolites whose concentrations ranged from 1 to 5 mM (40 to 200 nmol). PMID:23969086

  4. Analysis of nine food additives in red wine by ion-suppression reversed-phase high-performance liquid chromatography using trifluoroacetic acid and ammonium acetate as ion-suppressors.

    PubMed

    Zhao, Yong-Gang; Chen, Xiao-Hong; Yao, Shan-Shan; Pan, Sheng-Dong; Li, Xiao-Ping; Jin, Mi-Cong

    2012-01-01

    A reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed for the simultaneous determination of nine food additives, i.e., acesulfame, saccharin, caffeine, aspartame, benzoic acid, sorbic acid, stevioside, dehydroacetic acid and neotame in red wine. The effects of ion-suppressors, i.e., trifluoroacetic acid (TFA) and ammonium acetate (AmAc) on retention behavior of nine food additives in RP-HPLC separation were discussed in detail. The relationships between retention factors of solutes and volume percent of ion-suppressors in the mobile-phase systems of acetonitrile-TFA aqueous solution and acetonitrile-TFA-AmAc aqueous solution were quantitatively established, respectively. The results showed that the ion suppressors had not only an ion suppression effect, but also an organic modification effect on the acidic analytes. The baseline separation of nine food additives was completed by a gradient elution with acetonitrile-TFA(0.01%, v/v)-AmAc(2.5 mmol L(-1)) aqueous solution as the mobile phase. The recoveries were between 80.2 - 99.5% for all analytes with RSDs in the range of 1.5 - 8.9%. The linearities were in the range of 0.2 - 100.0 mg L(-1) with determination coefficients (r(2)) higher than 0.9991 for all analytes. The limits of quantification (LOQs) were between 0.53 - 0.99 mg L(-1). The applicability of the proposed method to detect and quantify food additives has been demonstrated in the analysis of 30 real samples. PMID:23059992

  5. Morphological evaluation of eccentric sets guide-plates of dcp-l 4.5 mm

    PubMed Central

    Borges, José Humberto de Souza; da Silva Filho, Antonio Lisboa; Pereira Neto, Francisco; Daher, Walter Rodrigo; de Mesquita, Alessandro Queiroz; Freitas, Anderson

    2012-01-01

    Objective To carry out isolated and comparative evaluations of the measurements of the set eccentric guide plates used in 4.5mm surgical implants, and to determine the effect of these measurements on compression strength. Methods Four eccentric guides, four large dynamic compression plates (L-DCP) from four local manufacturers, and a Vonder® 200 mm caliper brand were used. Five standard parameter measurements were created for the set eccentric guide-plate, which were identified as A to E. Four sets were made, using materials of the same factory, and identified as groups I to IV. The analyses were performed by measuring all the parameters from a ventral view of the plate, with the eccentric guide placed in the plate hole. Results Groups I and II showed the same values for all the parameters. All the groups showed the same measurements for E = 8.15 e B = 3.60. Group III: A = 8.10mm, C = 3.25mm, D = 1.25mm. Group IV: A = 7.00mm, C = 3.10mm, D = 0.30mm. Maximum compression force was (F Max.): Group I 80.58 N, Group. II: F Max. 81.63 N, Group. III: F Max. 36.32N, Group. IV: F Max. 37.52N Conclusion The measurements evaluated show a lack of standardization in the manufacture of orthopedic instruments and its effects on the values for compression strength. Level of Evidence: Level III, analytical study. PMID:24453573

  6. Ammonium methacrylate

    Integrated Risk Information System (IRIS)

    Ammonium methacrylate ; CASRN 16325 - 47 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  7. Ammonium sulfamate

    Integrated Risk Information System (IRIS)

    Ammonium sulfamate ; CASRN 7773 - 06 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  8. Is smaller better? Comparison of 3-mm and 5-mm leaf size for stereotactic radiosurgery: A dosimetric study

    SciTech Connect

    Chern, Shyh-shi . E-mail: Richard.Chern@hci.utah.edu; Leavitt, Dennis D.; Jensen, Randy L.; Shrieve, Dennis C.

    2006-11-15

    Purpose: To perform a dosimetric comparison of a minimal 3-mm leaf width multileaf collimator (MLC) and a minimal 5-mm MLC in dynamic conformal arc stereotactic radiosurgery for treatment of intracranial lesions. Methods and Materials: The treatment plans of 23 patients previously treated for intracranial lesions in our institution were redone using the BrainSCAN, version 5.3, stereotactic radiosurgery treatment planning system (BrainLAB). For each case, two dynamic conformal arc plans were generated: one using a minimal 3-mm micro-MLC (BrainLAB, Novalis) and one using a minimal 5-mm MLC (Varian Millennium). All arc parameters were the same in each of the two plans, except for the collimator angle settings. The collimator angle settings were optimized for each arc in each plan. A peritumoral rind structure (1 cm) was created to evaluate normal tissue sparing immediately adjacent to the target volume. Conformity indexes (CIs) were calculated for each plan. The dependence of normal tissue sparing and target conformity on target volume (TV) was determined. Results: The TV was 0.14-36.32 cm{sup 3} (median, 5.90). The CI was 1.22-2.60 (median, 1.51) for the 3-mm micro-MLC and 1.23-2.69 (median, 1.60) for the 5-mm MLC. Despite this small difference, it was a statistically significant increase (p < 0.0001) for the 5-mm MLC compared with the 3-mm micro-MLC. Improved normal tissue sparing was demonstrated using the 3-mm micro-MLC compared with the 5-mm MLC by examining the peritumoral rind volumes (PRVs) receiving 50% (PRV{sub 5}), 80% (PRV{sub 8}), and 90% (PRV{sub 9}) of the prescription dose. The reduction in the PRV{sub 5}, PRV{sub 8}, and PRV{sub 9} for the 3-mm micro-MLC compared with the 5-mm MLC was 13.5%, 12.9%, and 11.5%, respectively. The CI decreased with a larger TV, as did the difference in the CIs between the 3-mm micro-MLC and 5-mm MLC. A reduction in the PRV increased with larger TVs. Conclusion: The 3-mm micro-MLC provided better target conformity and

  9. Synergetic stress of acids and ammonium on the shift in the methanogenic pathways during thermophilic anaerobic digestion of organics.

    PubMed

    Lü, Fan; Hao, Liping; Guan, Dongxing; Qi, Yujiao; Shao, Liming; He, Pinjing

    2013-05-01

    Combined effects of acids and ammonium on functional pathway and microbial structure during organics methanization were investigated by stable isotopic method and quantitative PCR. The results showed that the stress from acids and ammonium was synergetic, resulted in different inhibition for acetoclastic and hydrogenotrophic methanogenesis and syntrophic acetate oxidation, leading to pathway shift. Methane production from acetate was affected more by acetate than by ammonium until the ammonium concentration reached 6-7 g-N/L. When the ammonium concentration exceeded 6 g-N/L, ammonium inhibition was strengthened by the increased concentration of acetate. At a low acetate concentration (50 mmol/L), acetoclastic methanogenesis dominated, regardless of ammonium concentration. At higher acetate concentrations (150 and 250 mmol/L) and at low-medium ammonium levels (1-4 g-N/L), acetate was mainly degraded by acetoclastic methanogenesis, while residual acetate was degraded by a combination of acetoclastic methanogenesis and the syntrophic reaction of syntrophic acetate oxidization and hydrogenotrophic methanogenesis with the latter dominating at 250 mmol/L acetate. At high ammonium levels (6-7 g-N/L), the degradation of acetate in the 150 mmol/L treatment was firstly through a combination of acetoclastic methanogenesis and the syntrophic pathway and then gradually shifted to the syntrophic pathway, while the degradation of acetate in the 250 mmol/L treatment was completely by the syntrophic pathway. PMID:23434042

  10. Is 5 mm MMLC suitable for VMAT-based lung SBRT? A dosimetric comparison with 2.5 mm HDMLC using RTOG-0813 treatment planning criteria for both conventional and high-dose flattening filter-free photon beams.

    PubMed

    Subramanian, Shanmuga V; Subramani, Vellaiyan; Thirumalai Swamy, Shanmugam; Gandhi, Arun; Chilukuri, Srinivas; Kathirvel, Murugesan

    2015-01-01

    The aim of this study is to assess the suitability of 5 mm millennium multileaf collimator (MMLC) for volumetric-modulated arc therapy (VMAT)-based lung stereotactic body radiotherapy (SBRT). Thirty lung SBRT patient treatment plans along with their planning target volumes (ranging from 2.01 cc to 150.11 cc) were transferred to an inhomogeneous lung phantom and retrospectively planned using VMAT technique, along with the high definition multileaf collimator (HDMLC) and MMLC systems. The plans were evaluated using Radiation Therapy Oncology Group (RTOG-0813) treatment planning criteria for target coverage, normal tissue sparing, and treatment efficiency for both the MMLC and HDMLC systems using flat and flattening filter-free (FFF) photon beams. Irrespective of the target volumes, both the MLC systems were able to satisfy the RTOG-0813 treatment planning criteria without having any major deviation. Dose conformity was marginally better with HDMLC. The average conformity index (CI) value was found to be 1.069 ± 0.034 and 1.075 ± 0.0380 for HDMLC and MMLC plans, respectively. For the 6 MV FFF beams, the plan was slightly more conformal, with the average CI values of 1.063 ± 0.029 and 1.073 ± 0.033 for the HDMLC and MMLC plans, respectively. The high dose spillage was the maximum for 2 cc volume set (3% for HDMLC and 3.1% for MMLC). In the case of low dose spillage, both the MLCs were within the protocol of no deviation, except for the 2 cc volume set. The results from this study revealed that VMAT-based lung SBRT using 5 mm MMLC satisfies the RTOG-0813 treatment planning criteria for the studied target size and shapes. PMID:26219006

  11. Washout/rainout contribution in wet deposition estimated by 0.5 mm precipitation sampling/analysis

    NASA Astrophysics Data System (ADS)

    Aikawa, Masahide; Hiraki, Takatoshi

    A precipitation dataset collected on a 0.5 mm precipitation basis was studied. The parameters analyzed in this study were the pH (i.e., H + concentration), electric conductivity (EC), and SO42- and NO3- concentrations. The NO3- concentration clearly decayed with an increase of the precipitation amount, while a larger variation was observed in the SO42- concentration even when the precipitation amount increased. Assuming that the decaying NO3- concentration (0.70 μg ml -1) was the result of the rainout process, the estimates were: annual total deposition, 3252 mg m -2 yr -1; rainout process, 1092 mg m -2 yr -1; and rainout/total, 34%. The estimates for SO42- were: annual total deposition, 4687 mg m -2 yr -1; rainout process, 2096 mg m -2 yr -1; and rainout/total, 45%.

  12. Controlling the length of plasma waveguide up to 5 mm, produced by femtosecond laser pulses in atomic clustered gas.

    PubMed

    Mohamed, Walid Tawfik; Chen, Guanglong; Kim, Jaehoon; Tao, Geng Xiao; Ahn, Jungkwen; Kim, Dong Eon

    2011-08-15

    We report the observation of longitudinally uniform plasma waveguide with a controlled length of up to nearly 5 mm, in argon clustered gas jet. This self-channeling plasma is obtained using a 35 mJ, 30 fs FWHM pulse as a pump laser pulse to create the plasma channel. A 1 mJ pulse of the same laser is used for probing the plasma channels using interferometric diagnostics. The radial distribution of the electron density confirms the formation of a plasma waveguide. Clustered argon enhances the absorption efficiency of femtosecond pulses which enables the use of pump pulses of only 35 mJ, approximately 10 times less energy than required for heating conventional gas targets. The plasma channel length is controlled by the laser focus point (F), the laser intensity (I), the pump-probe delay time (t) and the laser height from a nozzle (z). The variation of the electron density for these parameters is also studied. We found that the highest density of 1.2 x 10(19) cm(-3) was obtained at I = 5.2 x 10(16) W/cm(2), z = 2 mm and t = 7.6 ns. It was demonstrated that by using a clustered jet, both the plasma waveguide length and the plasma density could be controlled. PMID:21934955

  13. Vinyl acetate

    Integrated Risk Information System (IRIS)

    Vinyl acetate ; CASRN 108 - 05 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  14. Ethyl acetate

    Integrated Risk Information System (IRIS)

    Ethyl acetate ; CASRN 141 - 78 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Eff

  15. Phenylmercuric acetate

    Integrated Risk Information System (IRIS)

    Phenylmercuric acetate ; CASRN 62 - 38 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinog

  16. Thallium acetate

    Integrated Risk Information System (IRIS)

    Jump to main content . Integrated Risk Information System Recent Additions | Contact Us Search : All EPA IRIS • You are here : EPA Home • Research • Environmental Assessment • IRIS • IRIS Summaries Redirect Page As of September 30 , 2009 , the assessment summary for Thallium acetate is included in t

  17. Hydrothermal oxidation of organic wastes using reclaimed ammonium nitrate

    SciTech Connect

    Proesmans, P.I.; Luan, L.; Buelow, S.J.

    1996-04-01

    Ammonium nitrate is being studied as an alternative for ammonium perchlorate as an oxidizing agent in Department of Defense 1.1 and 1.3 rocket propellants. Use of ammonium nitrate would eliminate the HCl produced by ammonium perchlorate upon thermal decomposition. To stabilize the ammonium nitrate, which suffers from phase instability, potassium dinitramide (KDN) is added. This increased use of ammonium nitrate will ultimately create a need for environmentally responsible processes to reuse ammonium nitrate extracted from demilitarized rocket motors. Ammonium Nitrate was investigated as an oxidizing agent for methanol, acetic acid and phenol. High removal of organic, ammonia and nitrate was achieved at stoichiometric concentrations. The oxidation of ammonia by nitrate was much faster than the oxidation of either methanol or acetic acid. Phenol, however, was in strong competition with ammonia for the oxidizer (nitrate). Nitrogen products included N{sub 2}, N{sub 2}O, NO{sub 2{sup {minus}}} as well as toxic NO and trace amounts of NO{sub 2}. Carbon products were CO{sub 2}, HCO{sub 3{sup {minus}}}, CO{sub 3}{sup 2{minus}}, and CO.

  18. Ammonium nitrate explosive systems

    SciTech Connect

    Coburn, M.D.; Stinecipher, M.M.

    1981-11-17

    Novel explosives which comprise mixtures of ammonium nitrate and an ammonium salt of a nitroazole in desired ratios are disclosed. A preferred nitroazole is 3,5-dinitro-1,2,4-triazole. The explosive and physical properties of these explosives may readily be varied by the addition of other explosives and oxidizers. Certain of these mixtures have been found to act as ideal explosives.

  19. Ammonium nitrate explosive systems

    DOEpatents

    Stinecipher, Mary M.; Coburn, Michael D.

    1981-01-01

    Novel explosives which comprise mixtures of ammonium nitrate and an ammonium salt of a nitroazole in desired ratios are disclosed. A preferred nitroazole is 3,5-dinitro-1,2,4-triazole. The explosive and physical properties of these explosives may readily be varied by the addition of other explosives and oxidizers. Certain of these mixtures have been found to act as ideal explosives.

  20. Comparison of the holding power of 3.5-mm cortical versus 4.0-mm cancellous orthopedic screws in the pelvis of immature dogs (cadavers).

    PubMed

    Sardinas, J C; Kraus, K H; Sisson, R D

    1995-02-01

    A 3.5-mm cortical orthopedic screw was compared with a 4.0-mm cancellous screw for maximal load to failure in the pelvis of immature dogs. The pelvis from young cadavers (7 to 13 months old) was divided into hemipelves and used for testing of the 2 screw types. Two sites in each hemipelvis were used, mid-shaft of the ilium and mid-sacrum, including the wing of the ilium. The screws were extracted, and maximal load to failure and mode of failure were recorded. Maximal load to failure per millimeter of engaged thread was calculated. In either pelvic site, the 4.0-mm cancellous screw required a significantly (P < 0.05) higher pullout force per millimeter of engaged screw threads than did the 3.5-mm cortical bone screw. PMID:7717594

  1. Elongated beamlets: a simple technique for segment and MU reduction for sMLC IMRT delivery on accelerators utilizing 5 mm leaf widths.

    PubMed

    Price, R A; Paskalev, K; McNeeley, S; Ma, C-M

    2005-10-01

    The focus of this work is to demonstrate the effects of using an elongated beamlet to achieve similar dose conformity as achieved with a square beamlet while reducing the number of segments and subsequent MU required. A series of 10 patients were planned for IMRT delivery to the prostate using minimum beamlet sizes of 5x5 mm2 (default scheme), 10x5 mm2 with the short axis parallel to the prostate-rectum interface (scheme 1), and 10x5 mm2 with the short axis perpendicular to the prostate-rectum interface (scheme 2). All other parameters between plans were left unchanged. Plans were appropriately normalized and evaluated for R65, R40, conformity index, total number of segments and MU. All plans were generated using the Corvus inverse planning system. The average number of segments in this study decreased by approximately 49% for both schemes 1 and 2. The subsequent number of MU required decreased by approximately 34.6%. The resultant modified modulation scaling factor (MSFmod) decreased by approximately 34.3%. Additionally, we found that each isodose distribution using scheme 2 would still meet our clinical acceptance criteria with no visible degradation in the dose distribution as compared with the default scheme. In conclusion, we have demonstrated that it is possible to achieve similar results as those obtained using a 5x5 mm2 beamlet with respect to target coverage and critical structure sparing by using strategically oriented elongated beamlets. This technique directly translates to a decreased MSF(mod) allowing for decreased leakage dose to the patient, a decreased risk of exceeding secondary shielding limits in pre-existing vaults, and shorter treatment times. PMID:16177479

  2. NOTE: Elongated beamlets: a simple technique for segment and MU reduction for sMLC IMRT delivery on accelerators utilizing 5 mm leaf widths

    NASA Astrophysics Data System (ADS)

    Price, R. A., Jr.; Paskalev, K.; McNeeley, S.; Ma, C.-M.

    2005-10-01

    The focus of this work is to demonstrate the effects of using an elongated beamlet to achieve similar dose conformity as achieved with a square beamlet while reducing the number of segments and subsequent MU required. A series of 10 patients were planned for IMRT delivery to the prostate using minimum beamlet sizes of 5 × 5 mm2 (default scheme), 10 × 5 mm2 with the short axis parallel to the prostate rectum interface (scheme 1), and 10 × 5 mm2 with the short axis perpendicular to the prostate rectum interface (scheme 2). All other parameters between plans were left unchanged. Plans were appropriately normalized and evaluated for R65, R40, conformity index, total number of segments and MU. All plans were generated using the Corvus inverse planning system. The average number of segments in this study decreased by approximately 49% for both schemes 1 and 2. The subsequent number of MU required decreased by approximately 34.6%. The resultant modified modulation scaling factor (MSFmod) decreased by approximately 34.3%. Additionally, we found that each isodose distribution using scheme 2 would still meet our clinical acceptance criteria with no visible degradation in the dose distribution as compared with the default scheme. In conclusion, we have demonstrated that it is possible to achieve similar results as those obtained using a 5 × 5 mm2 beamlet with respect to target coverage and critical structure sparing by using strategically oriented elongated beamlets. This technique directly translates to a decreased MSFmod allowing for decreased leakage dose to the patient, a decreased risk of exceeding secondary shielding limits in pre-existing vaults, and shorter treatment times.

  3. Infrared band intensities in ammonium hydroxide and ammonium salts

    NASA Technical Reports Server (NTRS)

    Sethna, P. P.; Downing, H. D.; Pinkley, L. W.; Williams, D.

    1978-01-01

    We have applied Kramers-Kronig analysis to reflection spectra to determine the optical constants of ammonium hydroxide and of aqueous solutions of ammonium chloride and bromide. From considerations of the absorption indices k(nu) we conclude that ammonium hydroxide consists of a solution of NH3 in water, in which NH3 molecules are hydrogen bonded to neighboring water molecules. The spectrum of ammonium hydroxide differs from the spectra of ammonium salts, in which bands characteristic of NH4(+) ions are prominent. The existence of ammonium hydroxide as an aerosol in planetary atmospheres is briefly discussed

  4. Influence of heterogeneous ammonium availability on bacterial community structure and the expression of nitrogen fixation and ammonium transporter genes during in situ bioremediation of uranium-contaminated groundwater

    SciTech Connect

    Mouser, P.J.; N'Guessan, A.L.; Elifantz, H.; Holmes, D.E.; Williams, K.H.; Wilkins, M.J.; Long, P.E.; Lovley, D.R.

    2009-04-01

    The impact of ammonium availability on microbial community structure and the physiological status and activity of Geobacter species during in situ bioremediation of uranium-contaminated groundwater was evaluated. Ammonium concentrations varied by as much as two orders of magnitude (<4 to 400 {micro}M) across the study site. Analysis of 16S rRNA gene sequences suggested that ammonium influenced the composition of the microbial community prior to acetate addition with Rhodoferax species predominating over Geobacter species at the site with the highest ammonium, and Dechloromonas species dominating at sites with lowest ammonium. However, once acetate was added, and dissimilatory metal reduction was stimulated, Geobacter species became the predominant organisms at all locations. Rates of U(VI) reduction appeared to be more related to the concentration of acetate that was delivered to each location rather than the amount of ammonium available in the groundwater. In situ mRNA transcript abundance of the nitrogen fixation gene, nifD, and the ammonium importer gene, amtB, in Geobacter species indicated that ammonium was the primary source of nitrogen during in situ uranium reduction, and that the abundance of amtB transcripts was inversely correlated to ammonium levels across all sites examined. These results suggest that nifD and amtB expression by subsurface Geobacter species are closely regulated in response to ammonium availability to ensure an adequate supply of nitrogen while conserving cell resources. Thus, quantifying nifD and amtB expression appears to be a useful approach for monitoring the nitrogen-related physiological status of Geobacter species in subsurface environments during bioremediation. This study also emphasizes the need for more detailed analysis of geochemical/physiological interactions at the field scale, in order to adequately model subsurface microbial processes.

  5. 70. INTERIOR VIEW OF AMMONIUM NITRATE HOUSE, LOOKING AT AMMONIUM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    70. INTERIOR VIEW OF AMMONIUM NITRATE HOUSE, LOOKING AT AMMONIUM NITRATE IN STORAGE. APRIL 18, 1919. - United States Nitrate Plant No. 2, Reservation Road, Muscle Shoals, Muscle Shoals, Colbert County, AL

  6. Glufosinate-ammonium

    Integrated Risk Information System (IRIS)

    Glufosinate - ammonium ; CASRN 77182 - 82 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarci

  7. Condensation heat transfer characteristics of R410A-oil mixture in 5 mm and 4 mm outside diameter horizontal microfin tubes

    SciTech Connect

    Huang, Xiangchao; Ding, Guoliang; Hu, Haitao; Zhu, Yu.; Gao, Yifeng; Deng, Bin

    2010-10-15

    Condensation heat transfer characteristics of R410A-oil mixture in 5 mm and 4 mm outside diameter horizontal microfin tubes were investigated experimentally. The experimental condensing temperature is 40 C, and nominal oil concentration range is from 0% to 5%. The test results indicate that the presence of oil deteriorates the heat transfer. The deterioration effect is negligible at nominal oil concentration of 1%, and becomes obvious with the increase of nominal oil concentration. At 5% nominal oil concentration, the heat transfer coefficient of R410A-oil mixture is found to have a maximum reduction of 25.1% and 23.8% for 5 mm and 4 mm tubes, respectively. The predictabilities of the existing condensation heat transfer correlations were verified with the experimental data, and Yu and Koyama correlation shows the best predictability. By replacing the pure refrigerant properties with the mixture's properties, Yu and Koyama correlation has a deviation of -15% to + 20% in predicting the local condensation heat transfer coefficient of R410A-oil mixture. (author)

  8. Resistance of Pseudomonas to Quaternary Ammonium Compounds

    PubMed Central

    Adair, Frank W.; Geftic, Sam G.; Gelzer, Justus

    1971-01-01

    Tube dilution experiments showed that benzalkonium chloride (BC)-resistant mutants of Pseudomonas aeruginosa grown in the presence of 1,000 μg of BC per ml were at least 20 times more sensitive to polymyxin B and colistin sulfate than the BC-sensitive (BCS) parent strain. BCS cells selected for resistance to 500 μg of polymyxin B per ml remained sensitive to BC. There was little difference in the amount of carbenicillin, gentamicin sulfate, or rifampin needed to prevent growth of either the BCS or BC-resistant (BCR) strains. Growth of BCR cells was inhibited by ethylenediaminetetraacetate at a concentration of 400 μg/ml or less, whereas the BCS strain grew at ethylenediaminetetraacetate levels of 10,000 μg/ml. Phenylmercuric acetate and thimerosal inhibited growth of BCR and BCS cells at concentrations of 10 μg/ml or less. BCR cells were cross-resistant to >1,000 μg/ml concentrations of five other quaternary ammonium compounds, including three with C16 alkyls and two with alkyl groups of shorter length. The BCS strain was also resistant to >1,000 μg/ml concentrations of the three quaternary ammonium compounds with C16 alkyl groups but, in addition to BC, was inhibited by 200 μg/ml levels or less of the two quaternary ammonium compounds containing alkyl groups of less than 16 carbon atoms. PMID:4998348

  9. Repeated 1-cm Resolution Topographic and 2.5-mm Resolution Photomosiac Surveys of Benthic Communities and Fine Scale Bedforms in Monterey Canyon

    NASA Astrophysics Data System (ADS)

    Caress, D. W.; Hobson, B.; Thomas, H. J.; Henthorn, R.; Martin, E. J.; Bird, L.; Risi, M.; Troni, G.; Paull, C. K.; Rock, S.; Padial, J. A.; Hammond, M. M.

    2014-12-01

    The Monterey Bay Aquarium Research Institute has developed a low altitude, ROV-based seafloor mapping system that combines lidar laser ranging, multibeam sonar, and stereo photographic imagery. When operated at a 3-m altitude, this system maps seafloor topography with a 1-cm lateral resolution and simultaneously collects 2.5-mm resolution color photography. We have twice mapped an 80-m by 80-m area of a chemosynthetic clam community located at 2850-m depth in the Monterey Canyon axis. Both the topography and the photomosaics resolve changes in the clam community over a six-month interval. Many individual animals have moved, and tracks of those animals are visible in the lidar topography. No other changes in the seafloor at this site can be discerned. We have also performed single surveys of bedforms and scours at both 1850-m and 2850-m depths in Monterey Canyon. The highest resolution bathymetry data are collected using a 3DatDepth SL1 lidar laser scanner. This system has a 30° field of view and ranges continuously, achieving a 1 cm sounding spacing at a 3 m altitude and 0.3 m/s speed. Bathymetry data are also collected using a 400-kHz Reson 7125 multibeam sonar. This configuration produces 512 beams across a 135° wide swath; each beam has a 0.5° acrosstrack by 1.0° alongtrack angular width. At a 3-m altitude, the nadir beams have a 2.5 cm acrosstrack and 5 cm alongtrack footprint. Dual Prosilica GX1920 2.4 Mpixel color cameras provide color stereo photography of the seafloor. Illumination is provided by dual xenon strobes. The camera housings have been fitted with corrective optics achieving a 90° field of view with less than 1% distortion. At a 3-m altitude the raw image pixels have a 2.5 mm resolution. Position and attitude data are provided by a Kearfott SeaDevil Inertial Navigation System (INS) integrated with a 300 kHz Teledyne RD Instruments Doppler velocity log (DVL). A separate Paroscientific pressure sensor is mounted adjacent to the INS. The INS

  10. Femtosecond laser written 16.5 mm long glass-waveguide amplifier and laser with 5.2 dB cm-1 internal gain at 1534 nm

    NASA Astrophysics Data System (ADS)

    Hoyo, J.; Berdejo, V.; Toney Fernandez, T.; Ferrer, A.; Ruiz, A.; Valles, J. A.; Rebolledo, M. A.; Ortega-Feliu, I.; Solis, J.

    2013-10-01

    A 16.5 mm long, heavily doped erbium-ytterbium phosphate glass-waveguide amplifier was fabricated by the femtosecond laser (fs-laser) inscription technique. The femtosecond laser inscription of waveguides was carried out at 500 kHz repetition rate using a 0.68 NA aspheric lens. The energy deposition profile in the dielectric material was initially simulated using a generalized adaptive fast-Fourier evolver (GAFFE) algorithm. The size and shape of the guiding structures were carefully controlled by the slit shaping technique to reduce the coupling losses, with achievable values down to less than 0.1 dB. Rigorous simulations of the response of the active waveguides were carried out to optimize their performance as optical amplifiers. A maximum of 8.6 dB internal gain at 1534 nm was obtained upon bidirectional laser pumping at 976 nm, leading to a gain per unit length of 5.2 dB cm-1. Laser action was also achieved for both ring and linear cavity configurations.

  11. Hydrothermal synthesis of ammonium illite

    USGS Publications Warehouse

    Sucha, V.; Elsass, F.; Eberl, D.D.; Kuchta, L'.; Madejova, J.; Gates, W.P.; Komadel, P.

    1998-01-01

    Synthetic gel and glass of illitic composition, natural kaolinite, and mixed-layer illite-smectite were used as starting materials for hydrothermal synthesis of ammonium illite. Ammonium illite was prepared from synthetic gel by hydrothermal treatment at 300??C. The onset of crystallization began within 3 h, and well-crystallized ammonium illite appeared at 24 h. Increasing reaction time (up to four weeks) led to many illite layers per crystal. In the presence of equivalent proportions of potassium and ammonium, the gel was transformed to illite with equimolar contents of K and NH4. In contrast, synthesis using glass under the same conditions resulted in a mixture of mixed-layer ammonium illite-smectite with large expandability and discrete illite. Hydrothermal treatments of the fine fractions of natural kaolinite and illite-smectite produced ammonium illite from kaolinite but the illite-smectite remained unchanged.

  12. Distal third humeri fractures treated using the Synthes™ 3.5-mm extra-articular distal humeral locking compression plate: clinical, radiographic and patient outcome scores

    PubMed Central

    Lewis, James; Rao, Prasad; Parfitt, Dan; Mohanty, Khitish; Ghandour, Adel

    2014-01-01

    Background Conventional management protocols for distal humeral extra-articular fractures (e.g. conservative, double columnar plating) are often associated with complications. We aimed to describe our experience of using the Synthes™ 3.5-mm extra-articular distal humeral locking compression plate for treatment of extra-articular distal humeral fractures. Methods We prospectively studied 23 consecutive patients who underwent fixation, in a tertiary trauma centre, over 2 years. Data, including patient demographics, duration of follow-up, patient satisfaction, visual analogue score (VAS), Oxford Elbow Score, and final outcome on discharge, were collected and analyzed. Results Of the 23 patients (12 males, 11 females; mean age 47.5 years; range 18 years to 89 years), all fractures united radiologically and clinically after the index procedure, with a mean time to fracture union of 15.7 weeks (range 9 weeks to 34 weeks) and a mean time to discharge of 17.8 weeks (range 13 weeks to 34 weeks). Oxford Elbow Score was 36.5 (range 11 to 48) at 4.6 months postoperatively; at 20 months follow-up, it was 40 (range 14 to 48) and the VAS was 8.5 (range 5 to 10). One patient had radial nerve neuropraxia pre-operatively, and one postoperatively, and both recovered uneventfully 3 months postoperatively. Neither superficial, nor deep infections were observed in this cohort. Conclusions The present study reports satisfactory outcome with the usage of the Synthes plate for extra-articular fracture management. It has become the technique of choice in our centre because it provides excellent results.

  13. High-sensitivity 86 GHz (3.5 mm) VLBI Observations of M87: Deep Imaging of the Jet Base at a Resolution of 10 Schwarzschild Radii

    NASA Astrophysics Data System (ADS)

    Hada, Kazuhiro; Kino, Motoki; Doi, Akihiro; Nagai, Hiroshi; Honma, Mareki; Akiyama, Kazunori; Tazaki, Fumie; Lico, Rocco; Giroletti, Marcello; Giovannini, Gabriele; Orienti, Monica; Hagiwara, Yoshiaki

    2016-02-01

    We report on results from new high-sensitivity, high-resolution 86 GHz (3.5 mm) observations of the jet base in the nearby radio galaxy M87, obtained by the Very Long Baseline Array in conjunction with the Green Bank Telescope. The resulting image has a dynamic range exceeding 1500 to 1, the highest ever achieved for this jet at this frequency, resolving and imaging a detailed jet formation/collimation structure down to ∼10 Schwarzschild radii ({R}{{s}}). The obtained 86 GHz image clearly confirms some important jet features known at lower frequencies, i.e., a jet base with a wide opening angle, a limb-brightened intensity profile, a parabola-shape collimation profile and a counter jet. The limb-brightened structure is already well developed at \\lt 0.2 mas (\\lt 28 {R}{{s}}, projected) from the core, where the corresponding apparent opening angle becomes as wide as ∼100°. The subsequent jet collimation near the black hole evolves in a complicated manner; there is a “constricted” structure at tens of {R}{{s}} from the core, where the jet cross section is locally shrinking. We suggest that external pressure support from the inner part of the radiatively inefficient accretion flow may be dynamically important in shaping/confining the footprint of the magnetized jet. We also present the first 86 GHz polarimetric experiment using very long baseline interferometry for this source, where a highly polarized (∼20%) feature is detected near the jet base, indicating the presence of a well-ordered magnetic field. As a by-product, we additionally report a 43/86 GHz polarimetric result for our calibrator 3C 273, suggesting an extreme rotation measure near the core.

  14. Preparation of vinyl acetate

    DOEpatents

    Tustin, Gerald Charles; Zoeller, Joseph Robert; Depew, Leslie Sharon

    1998-01-01

    This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

  15. Preparation of vinyl acetate

    DOEpatents

    Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

    1998-03-24

    This invention pertains to the preparation of vinyl acetate by contacting a mixture of hydrogen and ketene with a heterogeneous catalyst containing a transition metal to produce acetaldehyde, which is then reacted with ketene in the presence of an acid catalyst to produce vinyl acetate.

  16. Ammonium diphosphitoindate(III)

    PubMed Central

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-01-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from InIII cations (site symmetry 3m.) adopting an octa­hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular–pyramidal geometry. Each InO6 octa­hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 + cations and the O atoms of the framework. PMID:23633983

  17. Ammonium diphosphitoindate(III).

    PubMed

    Hamchaoui, Farida; Rebbah, Houria; Le Fur, Eric

    2013-04-01

    The crystal structure of the title compound, NH4[In(HPO3)2], is built up from In(III) cations (site symmetry 3m.) adopting an octa-hedral environment and two different phosphite anions (each with site symmetry 3m.) exhibiting a triangular-pyramidal geometry. Each InO6 octa-hedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO3)2](-) layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO3)2](-) layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4 (+) cations and the O atoms of the framework. PMID:23633983

  18. A Biomechanical Comparison of Three 1.5-mm Plate and Screw Configurations and a Single 2.0-mm Plate for Internal Fixation of a Mandibular Condylar Fracture

    PubMed Central

    Aquilina, Peter; Parr, William C.H.; Chamoli, Uphar; Wroe, Stephen; Clausen, Philip

    2014-01-01

    The most stable pattern of internal fixation for mandibular condyle fractures is an area of ongoing discussion. This study investigates the stability of three patterns of plate fixation using readily available, commercially pure titanium implants. Finite element models of a simulated mandibular condyle fracture were constructed. The completed models were heterogeneous in bone material properties, contained approximately 1.2 million elements and incorporated simulated jaw adducting musculature. Models were run assuming linear elasticity and isotropic material properties for bone. No human subjects were involved in this investigation. The stability of the simulated condylar fracture reduced with the different implant configurations, and the von Mises stresses of a 1.5-mm X-shaped plate, a 1.5-mm rectangular plate, and a 1.5-mm square plate (all Synthes (Synthes GmbH, Zuchwil, Switzerland) were compared. The 1.5-mm X plate was the most stable of the three 1.5-mm profile plate configurations examined and had comparable mechanical performance to a single 2.0-mm straight four-hole plate. This study does not support the use of rectangular or square plate patterns in the open reduction and internal fixation of mandibular condyle fractures. It does provide some support for the use of a 1.5-mm X plate to reduce condylar fractures in selected clinical cases. PMID:25136411

  19. Carcinoma ex-pleomorphic adenoma of the salivary glands has a high risk of progression when the tumor invades more than 2.5 mm beyond the capsule of the residual pleomorphic adenoma.

    PubMed

    Rito, Miguel; Fonseca, Isabel

    2016-03-01

    Carcinoma ex-pleomorphic adenoma (CPA) is subclassified based on the extent of penetration of the malignant component beyond the fibrous capsule of the pre-existing pleomorphic adenoma (PA). These subclasses are considered to be prognostically significant since the non-invasive/minimally invasive groups have an excellent outcome. Nevertheless, there is no consensus as to the cutoff value to distinguish between minimal and wide invasion, even though the 2005 WHO classification defines 1.5 mm as cutoff. The objective of this study is to evaluate a consecutive series of CPA, in order to establish what the effect is of the extent of extra-capsular invasion on prognosis. Fifty-eight cases of CPA were reviewed to obtain demographic and pathological information. Extent of invasion was measured. Eleven cases were non-invasive, 9 had ≤1.5 mm invasion, and for the remainder, the depth of invasion ranged between 2.5 and >10 mm. Distant metastases or death did not occur in the first two groups. In the group with ≥2.5 mm invasion, 15 patients had progressive disease and 9 of them died. The minimum extent of invasion associated with tumor progression and death was 2.5 mm. Two histologically non-invasive carcinomas had regional lymph node metastasis. CPA with ≤1.5 mm depth of invasion has good prognosis. Nevertheless, the lymph node metastases found in two cases of this group question the concept that intracapsular/minimally invasive CPA has a prognosis similar to that of PA. The minimum extent of invasion associated with death was 2.5 mm, which is at variance with findings in other recent series. Thirteen cases with depth of invasion exceeding 2.5 mm did well, confirming that additional factors should be considered in the clinical management of these patients. PMID:26638158

  20. High performance ammonium nitrate propellant

    NASA Technical Reports Server (NTRS)

    Anderson, F. A. (Inventor)

    1979-01-01

    A high performance propellant having greatly reduced hydrogen chloride emission is presented. It is comprised of: (1) a minor amount of hydrocarbon binder (10-15%), (2) at least 85% solids including ammonium nitrate as the primary oxidizer (about 40% to 70%), (3) a significant amount (5-25%) powdered metal fuel, such as aluminum, (4) a small amount (5-25%) of ammonium perchlorate as a supplementary oxidizer, and (5) optionally a small amount (0-20%) of a nitramine.

  1. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  2. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... Specific Substances Affirmed as GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg... is prepared by the neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient...

  3. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...). It is prepared by the sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food... Specific Substances Affirmed as GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3,...

  4. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg. No. 7783-20-2) occurs... neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient meets the specifications of the...

  5. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food... Specific Substances Affirmed as GRAS § 184.1143 Ammonium sulfate. (a) Ammonium sulfate ((NH4)2SO4, CAS Reg... is prepared by the neutralization of sulfuric acid with ammonium hydroxide. (b) The ingredient...

  6. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...). It is prepared by the sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium carbonate. 184.1137 Section 184.1137 Food... Specific Substances Affirmed as GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3,...

  7. Solubility of the Sodium and Ammonium Salts of Oxalic Acid in Water with Ammonium Sulfate.

    PubMed

    Buttke, Lukas G; Schueller, Justin R; Pearson, Christian S; Beyer, Keith D

    2016-08-18

    The solubility of the sodium and ammonium salts of oxalic acid in water with ammonium sulfate present has been studied using differential scanning calorimetry, X-ray crystallography, and infrared spectroscopy. The crystals that form from aqueous mixtures of ammonium sulfate/sodium hydrogen oxalate were determined to be sodium hydrogen oxalate monohydrate under low ammonium sulfate conditions and ammonium hydrogen oxalate hemihydrate under high ammonium sulfate conditions. Crystals from aqueous mixtures of ammonium sulfate/sodium oxalate were determined to be ammonium oxalate monohydrate under moderate to high ammonium sulfate concentrations and sodium oxalate under low ammonium sulfate concentrations. It was also found that ammonium sulfate enhances the solubility of the sodium oxalate salts (salting in effect) and decreases the solubility of the ammonium oxalate salts (salting out effect). In addition, a partial phase diagram for the ammonium hydrogen oxalate/water system was determined. PMID:27482644

  8. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  9. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  10. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  11. 46 CFR 148.205 - Ammonium nitrate and ammonium nitrate fertilizers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Ammonium nitrate and ammonium nitrate fertilizers. 148... Materials § 148.205 Ammonium nitrate and ammonium nitrate fertilizers. (a) This section applies to the stowage and transportation in bulk of ammonium nitrate and the following fertilizers composed of...

  12. Properties of the Nafion membrane impregnated with hydroxyl ammonium based ionic liquids

    NASA Astrophysics Data System (ADS)

    Garaev, Valeriy; Kleperis, Janis; Pavlovica, Sanita; Vaivars, Guntars

    2012-08-01

    In this work, the Nafion 112 membrane impregnated with nine various hydroxyl ammonium based ionic liquids have been investigated. The used ionic liquids were combined from hydroxyl ammonium cations (2-hydroxyethylammonium/HEA, bis(2- hydroxyethyl)ammonium/BHEA, tris(2-hydroxyethyl)ammonium/THEA) and carboxylate anions (formate, acetate, lactate). The membranes are characterized by conductivity and thermal stability measurements. It was found, that almost all composites have 10 times higher ion conductivity than a pure Nafion 112 at 90 °C in ambient environment due to the higher thermal stability. The thermal stability of Nafion membrane was increased by all studied nine ionic liquids. In this work, only biodegradable ionic liquids were used for composite preparation.

  13. Anaerobic ammonium oxidation for treatment of ammonium-rich wastewaters*

    PubMed Central

    Zhang, Lei; Zheng, Ping; Tang, Chong-jian; Jin, Ren-cun

    2008-01-01

    The concept of anaerobic ammonium oxidation (ANAMMOX) is presently of great interest. The functional bacteria belonging to the Planctomycete phylum and their metabolism are investigated by microbiologists. Meanwhile, the ANAMMOX is equally valuable in treatment of ammonium-rich wastewaters. Related processes including partial nitritation-ANAMMOX and completely autotrophic nitrogen removal over nitrite (CANON) have been developed, and lab-scale experiments proved that both processes were quite feasible in engineering with appropriate control. Successful full-scale practice in the Netherlands will accelerate application of the process in future. This review introduces the microbiology and more focuses on application of the ANAMMOX process. PMID:18500782

  14. Comparative DFT study of crystalline ammonium perchlorate and ammonium dinitramide.

    PubMed

    Zhu, Weihua; Wei, Tao; Zhu, Wei; Xiao, Heming

    2008-05-22

    The electronic structure, vibrational properties, absorption spectra, and thermodynamic properties of crystalline ammonium perchlorate (AP) and ammonium dinitramide (ADN) have been comparatively studied using density functional theory in the local density approximation. The results shows that the p states for the two solids play a very important role in their chemical reaction. From the low frequency to high frequency region, ADN has more motion modes for the vibrational frequencies than AP. The absorption spectra of AP and ADN display a few, strong bands in the fundamental absorption region. The thermodynamic properties show that ADN is easier to decompose than AP as the temperature increases. PMID:18396853

  15. Field Dissipation and Storage Stability of Glufosinate Ammonium and Its Metabolites in Soil

    PubMed Central

    Zhang, Yun; Wang, Kai; Wu, Junxue; Zhang, Hongyan

    2014-01-01

    A simple analytical method was developed to measure concentrations of glufosinate ammonium and its metabolites, 3-methylphosphinico-propionic acid (MPP) and 2-methylphosphinico-acetic acid (MPA), in field soil samples. To determine the minimum quantification limit, samples were spiked at different levels (0.1, 0.5, and 1.0 mg/kg). Soil samples were extracted with ammonium hydroxide solution 5% (v/v), concentrated, and reacted with trimethyl orthoacetate (TMOA) in the presence of acetic acid for derivatization. The derivatives were quantified by gas chromatography (GC) using a flame photometric detector (FPD). The linear correlation coefficients of glufosinate ammonium, MPP, and MPA in soil were 0.991, 0.999, and 0.999, respectively. The recoveries of this method for glufosinate ammonium, MPP, and MPA in soil were 77.2–95.5%, 98.3–100.3%, and 99.3–99.6% with relative standard deviations (RSD) of 1.8–4.1%, 0.4–1.4%, and 1.3–2.0%, respectively. Glufosinate ammonium dissipated rapidly in soil to MPA in hours and gradually degraded to MPP. The half-life of glufosinate ammonium degradation in soil was 2.30–2.93 days in an open field. In soil samples stored at −20°C glufosinate ammonium was stable for two months. The results of this study should provide guidance for the safe application of the herbicide glufosinate ammonium to agricultural products and the environment. PMID:25374604

  16. Acetate Dependence of Tumors

    PubMed Central

    Comerford, Sarah A.; Huang, Zhiguang; Du, Xinlin; Wang, Yun; Cai, Ling; Witkiewicz, Agnes; Walters, Holly; Tantawy, Mohammed N.; Fu, Allie; Manning, H. Charles; Horton, Jay D.; Hammer, Robert E.; McKnight, Steven L.; Tu, Benjamin P.

    2014-01-01

    SUMMARY Acetyl-CoA represents a central node of carbon metabolism that plays a key role in bioenergetics, cell proliferation and the regulation of gene expression. How highly glycolytic or hypoxic tumors are able to produce sufficient quantities of this metabolite to support cell growth and survival under nutrient-limiting conditions remains poorly understood. Here we show that the nucleocytosolic acetyl-CoA synthetase enzyme, ACSS2, supplies a key source of acetyl-CoA for tumors by capturing acetate as a carbon source. Despite exhibiting no gross deficits in growth or development, adult mice lacking ACSS2 exhibit a significant reduction in tumor burden in two different models of hepatocellular carcinoma. ACSS2 is expressed in a large proportion of human tumors and its activity is responsible for the majority of cellular acetate uptake into both lipids and histones. These observations may qualify ACSS2 as a targetable metabolic vulnerability of a wide spectrum of tumors. PMID:25525877

  17. Paradigm for industrial strain improvement identifies sodium acetate tolerance loci in Zymomonas mobilis and Saccharomyces cerevisiae

    SciTech Connect

    Yang, Shihui; Land, Miriam L; Klingeman, Dawn Marie; Pelletier, Dale A; Lu, Tse-Yuan; Martin, S L.; Guo, Hao-Bo; Smith, Jeremy C; Brown, Steven D

    2010-01-01

    The application of systems biology tools holds promise for rational industrial microbial strain development. Here, we characterize a Zymomonas mobilis mutant (AcR) demonstrating sodium acetate tolerance that has potential importance in biofuel development. The genome changes associated with AcR are determined using microarray comparative genome sequencing (CGS) and 454-pyrosequencing. Sanger sequencing analysis is employed to validate genomic differences and to investigate CGS and 454-pyrosequencing limitations. Transcriptomics, genetic data and growth studies indicate that over-expression of the sodium-proton antiporter gene nhaA confers the elevated AcR sodium acetate tolerance phenotype. nhaA over-expression mostly confers enhanced sodium (Na{sup +}) tolerance and not acetate (Ac{sup -}) tolerance, unless both ions are present in sufficient quantities. NaAc is more inhibitory than potassium and ammonium acetate for Z. mobilis and the combination of elevated Na{sup +} and Ac{sup -} ions exerts a synergistic inhibitory effect for strain ZM4. A structural model for the NhaA sodium-proton antiporter is constructed to provide mechanistic insights. We demonstrate that Saccharomyces cerevisiae sodium-proton antiporter genes also contribute to sodium acetate, potassium acetate, and ammonium acetate tolerances. The present combination of classical and systems biology tools is a paradigm for accelerated industrial strain improvement and combines benefits of few a priori assumptions with detailed, rapid, mechanistic studies.

  18. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... sublimation of a mixture of ammonium sulfate and calcium carbonate and occurs as a white powder or a hard... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food... GRAS § 184.1137 Ammonium carbonate. (a) Ammonium carbonate ((NH4)2CO3, CAS Reg. No. 8000-73-5) is...

  19. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  20. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  1. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium (marker residue) in chickens is 0.38 parts per million in fat (target tissue). A tolerance refers to the... animals. (b) The safe concentrations for total maduramicin ammonium residues in uncooked edible...

  2. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.375 Maduramicin ammonium. A tolerance is established for residues of maduramicin ammonium in chickens as follows: (a) A tolerance for maduramicin ammonium...

  3. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  4. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  5. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  6. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138...

  7. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  8. 21 CFR 184.1138 - Ammonium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    .... No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution. The less soluble sodium salt separates out at elevated temperatures, and ammonium chloride is recovered... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium chloride. 184.1138 Section 184.1138...

  9. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  10. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  11. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  12. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  13. 21 CFR 582.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ammonium sulfate. 582.1143 Section 582.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1143 Ammonium sulfate. (a) Product. Ammonium sulfate. (b) Conditions of use. This...

  14. Extraction of urea and ammonium ion

    NASA Technical Reports Server (NTRS)

    Anselmi, R. T.; Husted, R. R.; Schulz, J. R.

    1977-01-01

    Water purification system keeps urea and ammonium ion concentration below toxic limits in recirculated water of closed loop aquatic habitat. Urea is first converted to ammonium ions and carbon dioxide by enzygmatic action. Ammonium ions are removed by ion exchange. Bioburden is controlled by filtration through 0.45 micron millipore filters.

  15. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  16. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  17. 21 CFR 582.1141 - Ammonium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  18. Responses of Pisum sativum L. to exogenous indole acetic acid application under manganese toxicity.

    PubMed

    Gangwar, Savita; Singh, Vijay Pratap; Maurya, Jagat Narayan

    2011-06-01

    Responses of pea (Pisum sativum L.) seedlings to manganese (50, 100 and 250 μM) and indole acetic acid (10 and 100 μM) treatments were investigated. Single and combined exposure of pea to manganese and 100 μM indole acetic acid decreased root and shoot fresh mass, chlorophyll, carotenoids, protein and nitrogen while ammonium content increased compared to the control. Combined treatment of pea with 250 μM manganese and 100 μM indole acetic acid decreased root and shoot fresh mass by 54% and 51%, chlorophyll and carotenoids by 31% and 26%, root and shoot protein by 47% and 44%, and root and shoot nitrogen by 44% and 40%, respectively. Activities of glutamine synthetase and glutamate synthase were decreased by the exposure of manganese and 100 μM indole acetic acid while glutamate dehydrogenase activity increased. Combined application of 250 μM manganese and 100 μM indole acetic acid decreased root and shoot glutamine synthetase activity by 44% and 39%, and glutamate synthase activity by 39% and 37% while root and shoot glutamate dehydrogenase activity increased by 47% and 42%, respectively compared to the control. In contrast, application of 10 μM indole acetic acid together with manganese decreased the negative impacts of manganese, and promoted seedling growth compared to the manganese treatments alone. This study has shown that 10 μM indole acetic acid protected pea seedlings appreciably from manganese toxicity by regulating ammonium content and the activities of enzymes of ammonium assimilation, while 100 μM of indole acetic acid exhibited opposite response under manganese toxicity. PMID:21516457

  19. Scaleable production and separation of fermentation-derived acetic acid. Final CRADA report.

    SciTech Connect

    Snyder, S. W.; Energy Systems

    2010-02-08

    Half of U.S. acetic acid production is used in manufacturing vinyl acetate monomer (VAM) and is economical only in very large production plants. Nearly 80% of the VAM is produced by methanol carbonylation, which requires high temperatures and exotic construction materials and is energy intensive. Fermentation-derived acetic acid production allows for small-scale production at low temperatures, significantly reducing the energy requirement of the process. The goal of the project is to develop a scaleable production and separation process for fermentation-derived acetic acid. Synthesis gas (syngas) will be fermented to acetic acid, and the fermentation broth will be continuously neutralized with ammonia. The acetic acid product will be recovered from the ammonium acid broth using vapor-based membrane separation technology. The process is summarized in Figure 1. The two technical challenges to success are selecting and developing (1) microbial strains that efficiently ferment syngas to acetic acid in high salt environments and (2) membranes that efficiently separate ammonia from the acetic acid/water mixture and are stable at high enough temperature to facilitate high thermal cracking of the ammonium acetate salt. Fermentation - Microbial strains were procured from a variety of public culture collections (Table 1). Strains were incubated and grown in the presence of the ammonium acetate product and the fastest growing cultures were selected and incubated at higher product concentrations. An example of the performance of a selected culture is shown in Figure 2. Separations - Several membranes were considered. Testing was performed on a new product line produced by Sulzer Chemtech (Germany). These are tubular ceramic membranes with weak acid functionality (see Figure 3). The following results were observed: (1) The membranes were relatively fragile in a laboratory setting; (2) Thermally stable {at} 130 C in hot organic acids; (3) Acetic acid rejection > 99%; and (4

  20. Antennal responses of West Indian and Caribbean fruit flies (Diptera: Tephritidae) to ammonium bicarbonate and putrescine lures

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Efforts to monitor and detect tephritid fruit flies in the genus Anastrepha currently involve MultiLure traps baited with two food-based synthetic attractants; ammonium acetate and putrescine (1,4-diaminobutane). These baits are used in Central America, Florida, Texas, and the Caribbean, each region...

  1. Hydrides of CeNi/sub 5/, MmNi/sub 5/, Ca/sub 0/ /sub 2/(Ce/sub 0/ /sub 65/Mm/sub 0/ /sub 35/)/sub 0/ /sub 8/Ni/sub 5/, Ca/sub 0/ /sub 2/Ce/sub 0/ /sub 8/Ni/sub 5/, Ca/sub 0/ /sub 2/Mm/sub 0/ /sub 8/Ni/sub 5/, and mixed CeNi/sub 5//MmNi/sub 5/

    SciTech Connect

    Lakner, J.F.; Chow, T.S.

    1982-09-01

    Six intermetallic alloys (CeNi/sub 5/, MmNi/sub 5/, Ca/sub 0/ /sub 2/(Ce/sub 0/ /sub 65/Mm/sub 0/ /sub 35/)/sub 0/ /sub 8/Ni/sub 5/, Ca/sub 0/ /sub 2/Ce/sub 0/ /sub 8/Ni/sub 5/, Ca/sub 0/ /sub 2/Mm/sub 0/ /sub 8/Ni/sub 5/, and a mixed alloy, CeNi/sub 5//MmNi/sub 5/) were investigated with respect to their suitability to provide high hydrogen capacity and their potential for use in providing substantial hydrogen pressure at both low and high temperatures. A second phase of our investigation dealt with ball-milling and hydriding and dehydriding cycles to produce fine particles for use in hydride powder transfer studies. A summary of several Van't Hoff plots is also included for hydride-forming alloys.

  2. Phase diagram of ammonium nitrate

    NASA Astrophysics Data System (ADS)

    Dunuwille, M.; Yoo, C. S.

    2014-05-01

    Ammonium Nitrate (AN) has often subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood -resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 17 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400 °C.

  3. Fluorometric determination of ammonium ion by ion chromatography using postcolumn derivatization with o-phthaldialdehyde.

    PubMed

    Kuo, Chun-Ting; Wang, Po-Yen; Wu, Chien-Hou

    2005-08-26

    A postcolumn fluorometric derivatization method for the determination of trace amounts of ammonium ion (microg/L level) under matrices with high concentrations of sodium and amino acids has been developed. In this method, ammonium ion was determined by ion chromatography combined with fluorometric detection (IC-FL) in less than 16 min. IC was performed in a high-capacity cation-exchange Dionex IonPac CS16 analytical column (250 mm x 5 mm) under isocratic conditions with 30 mM methanesulfonic acid (MSA) as mobile phase at flow-rate 1.0 mL/min. To remove amino acid interference, the postcolumn derivatization based on the reaction of ammonia with o-phthaldialdehyde (OPA) and sulfite was applied. The excitation and emission wavelengths were 364 and 425 nm, respectively. The effects of pH, reaction temperature and time, OPA-reagent composition and concentration, and sample matrix were studied. The linear range and detection limit of this method were similar to the standard method. The IC-FL method with a postcolumn fluorometric derivatization allows the routine determination of ammonium ion in extreme matrices where the ratios of sodium and amino acids to ammonium are up to 2,800,000:1 and 28,000:1, respectively. PMID:16106853

  4. The enhancement of ammonium removal from ethanolamine wastewater using air-cathode microbial fuel cells coupled to ferric reduction.

    PubMed

    Shin, Ja-Won; Seo, Seok-Ju; Maitlo, Hubdar Ali; Park, Joo-Yang

    2015-08-01

    A microbial fuel cell (MFC) with biological Fe(III) reduction was implemented for simultaneous ethanolamine (ETA) degradation and electrical energy generation. In the feasibility experiment using acetate as a substrate in a single-chamber MFC with goethite and ammonium at a ratio of 3.0(mol/mol), up to 96.1% of the ammonium was removed through the novel process related to Fe(III). In addition, the highest voltage output (0.53V) and maximum power density (0.49Wm(-2)) were obtained. However, the ammonium removal and electrical performance decreased as acetate was replaced with ETA. In the long-term experiment, the electrical performance markedly decreased where the voltage loss increased due to Fe deposition on the membranes. PMID:25804534

  5. [Nomegestrol acetate: clinical pharmacology].

    PubMed

    Lello, S

    2009-10-01

    Progestogens are used in clinical practice in some conditions. Their effects depend on their chemical structure, pharmacokinetics, pharmacodynamics, with important differences among various progestogens. Generally, progestins are classified according to their parent molecule, of which often they keep some features. Derivatives of 19-nor-progesterone are characterized by high selectivity of action on progestin receptor. In particular, nomegestrol acetate (NomAc) shows an important progestational potency, neutral gluco-lipid profile, and antigonadotropic activity. It is used for treating menstrual cycle disorders and for hormone replacement therapy in menopause in association with an estrogen. In future, thanks to its antigonadotropic activity, NomAc will be used in estroprogestin combinations in fertile women, thus taking advantage of its tolerability profile and obtaining numerous non-contraceptive benefits as well. PMID:19749678

  6. Impact of Ammonium on Syntrophic Organohalide-Respiring and Fermenting Microbial Communities.

    PubMed

    Delgado, Anca G; Fajardo-Williams, Devyn; Kegerreis, Kylie L; Parameswaran, Prathap; Krajmalnik-Brown, Rosa

    2016-01-01

    Syntrophic interactions between organohalide-respiring and fermentative microorganisms are critical for effective bioremediation of halogenated compounds. This work investigated the effect of ammonium concentration (up to 4 g liter(-1) NH4 (+)-N) on trichloroethene-reducing Dehalococcoides mccartyi and Geobacteraceae in microbial communities fed lactate and methanol. We found that production of ethene by D. mccartyi occurred in mineral medium containing ≤2 g liter(-1) NH4 (+)-N and in landfill leachate. For the partial reduction of trichloroethene (TCE) to cis-dichloroethene (cis-DCE) at ≥1 g liter(-1) NH4 (+)-N, organohalide-respiring dynamics shifted from D. mccartyi and Geobacteraceae to mainly D. mccartyi. An increasing concentration of ammonium was coupled to lower metabolic rates, longer lag times, and lower gene abundances for all microbial processes studied. The methanol fermentation pathway to acetate and H2 was conserved, regardless of the ammonium concentration provided. However, lactate fermentation shifted from propionic to acetogenic at concentrations of ≥2 g liter(-1) NH4 (+)-N. Our study findings strongly support a tolerance of D. mccartyi to high ammonium concentrations, highlighting the feasibility of organohalide respiration in ammonium-contaminated subsurface environments. IMPORTANCE Contamination with ammonium and chlorinated solvents has been reported in numerous subsurface environments, and these chemicals bring significant challenges for in situ bioremediation. Dehalococcoides mccartyi is able to reduce the chlorinated solvent trichloroethene to the nontoxic end product ethene. Fermentative bacteria are of central importance for organohalide respiration and bioremediation to provide D. mccartyi with H2, their electron donor, acetate, their carbon source, and other micronutrients. In this study, we found that high concentrations of ammonium negatively correlated with rates of trichloroethene reductive dehalogenation and

  7. Impact of Ammonium on Syntrophic Organohalide-Respiring and Fermenting Microbial Communities

    PubMed Central

    Fajardo-Williams, Devyn; Kegerreis, Kylie L.; Parameswaran, Prathap

    2016-01-01

    ABSTRACT Syntrophic interactions between organohalide-respiring and fermentative microorganisms are critical for effective bioremediation of halogenated compounds. This work investigated the effect of ammonium concentration (up to 4 g liter−1 NH4+-N) on trichloroethene-reducing Dehalococcoides mccartyi and Geobacteraceae in microbial communities fed lactate and methanol. We found that production of ethene by D. mccartyi occurred in mineral medium containing ≤2 g liter−1 NH4+-N and in landfill leachate. For the partial reduction of trichloroethene (TCE) to cis-dichloroethene (cis-DCE) at ≥1 g liter−1 NH4+-N, organohalide-respiring dynamics shifted from D. mccartyi and Geobacteraceae to mainly D. mccartyi. An increasing concentration of ammonium was coupled to lower metabolic rates, longer lag times, and lower gene abundances for all microbial processes studied. The methanol fermentation pathway to acetate and H2 was conserved, regardless of the ammonium concentration provided. However, lactate fermentation shifted from propionic to acetogenic at concentrations of ≥2 g liter−1 NH4+-N. Our study findings strongly support a tolerance of D. mccartyi to high ammonium concentrations, highlighting the feasibility of organohalide respiration in ammonium-contaminated subsurface environments. IMPORTANCE Contamination with ammonium and chlorinated solvents has been reported in numerous subsurface environments, and these chemicals bring significant challenges for in situ bioremediation. Dehalococcoides mccartyi is able to reduce the chlorinated solvent trichloroethene to the nontoxic end product ethene. Fermentative bacteria are of central importance for organohalide respiration and bioremediation to provide D. mccartyi with H2, their electron donor, acetate, their carbon source, and other micronutrients. In this study, we found that high concentrations of ammonium negatively correlated with rates of trichloroethene reductive dehalogenation and

  8. PACE-90 water and solute transport calculations for 0.01, 0.1, and 0. 5 mm/yr infiltration into Yucca Mountain; Yucca Mountain Site Characterization Project

    SciTech Connect

    Dykhuizen, R.C.; Eaton, R.R.; Hopkins, P.L.; Martinez, M.J.

    1991-12-01

    Numerical results are presented for the Performance Assessment Calculational Exercise (PACE-90). One- and two-dimensional water and solute transport are presented for steady infiltration into Yucca Mountain. Evenly distributed infiltration rates of 0.01, 0.1, and 0.5 mm/yr were considered. The calculations of solute transport show that significant amounts of radionuclides can reach the water table over 100,000 yr at the 0.5 mm/yr rate. For time periods less than 10,000 yr or infiltrations less than 0.1 mm/yr very little solute reaches the water table. The numerical simulations clearly demonstrate that multi-dimensional effects can result in significant decreases in the travel time of solute through the modeled domain. Dual continuum effects are shown to be negligible for the low steady state fluxes considered. However, material heterogeneities may cause local amplification of the flux level in multi-dimensional flows. These higher flux levels may then require modeling of a dual continuum porous medium.

  9. Ammonium assmilation in spruce ectomycorrhizas

    SciTech Connect

    Chalot, M.; Brun, A.; Botton, B. ); Stewart, G. )

    1990-05-01

    Assimilation of labelled NH{sub 4}{sup +} into amino acids has been followed in ectomycorrhizal roots of spruce. Over an 18 h period of NH{sub 4}{sup +} feeding, Gln, Glu and Ala became the most abundant amino acids. Gln was also the most highly labelled amino acid during the experiment, followed by Glu and Ala. This result indicates that Gln synthesis is an important ammonium utilization reaction in spruce mycorrhizas. Addition of MSX to NH{sub 4}{sup +} fed mycorrhizas caused an inhibition of Gln accumulation with a corresponding increase in Glu, Ala and Asn levels. The supply of MSX induced a sharp diminution of {sup 15}N enrichment in both amino and amido groups of glutamine. In contrast, the {sup 15}N incorporation into Glu and derivatives (Ala and Asp) remained very high. This study demonstrates that the fungal glutamate dehydrogenase is quite operative in spruce ectomycorrhizas since it is able to sustain ammonium assimilation when glutamine synthetase is inhibited.

  10. Structural study of ammonium metatungstate

    SciTech Connect

    Christian, Joel B. Whittingham, M. Stanley

    2008-08-15

    Several techniques have been used to study the structure of the Keggin-type polyoxometalate salt ammonium metatungstate (AMT)-(NH{sub 4}){sub 6}[H{sub 2}W{sub 12}O{sub 40}]*nH{sub 2}O, a potential fuel cell catalyst. The dehydrated salt is comprised of a mixture of crystallites of different unit cells in a centered eutactic cubic configuration, with an average unit cell of a{approx_equal}12.295. Varied orientations of the Keggin ions in the cubic arrangement create the differences, and orientational variation within each unit cell size represents an energy well. Progressive hydration of each crystallite leads to expansion of the lattice, with the degree of expansion depending on the locations of the water added in relation to the Keggin ion, which is influenced by cation location and hydrogen bonding. The structural hypothesis is supported by electron diffraction of single and multicrystal samples, by powder density measurements, X-ray powder diffraction studies, synchrotron powder X-ray diffraction, and a priori structural modeling studies. Based on the structure, projected active site densities are compared with nanostructured platinum catalysts for fuel cell application. - Graphical abstract: The structure of ammonium metatungstate powders are highly dependent on hydration and POM molecule rotation, with cation and hydrogen bonding forces directing a mixture of structures that have been studied with bulk and single-crystal methods. The illustration shows Monte Carlo simulated anion structural disorder for the fully dehydrated form of the title compound.

  11. Phase Diagram of Ammonium Nitrate

    NASA Astrophysics Data System (ADS)

    Dunuwille, Mihindra; Yoo, Choong-Shik

    2013-06-01

    Ammonium Nitrate (AN) has often been subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood - resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety, in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN, in different chemical environments, at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 15 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 673 K. The present study has been supported by the U.S. DHS under Award Number 2008-ST-061-ED0001.

  12. Chemical destruction of HMX-based explosives with ammonium hydroxide

    SciTech Connect

    Skidmore, C.; Dell`Orco, P.; Flesner, R.; Kramer, J.; Spontarelli, T.

    1995-09-01

    A series of experiments at Los Alamos National Laboratory explored the efficacy of ammonium hydroxide solutions in converting HMX (cyclotetramethylene-tetranitramine, or Octogen) and HMX-based explosives to nonenergetic, nonhazardous materials. When 80 g of explosive was converted in a reactor operating at 85 psig pressure at 140 C, the principal gaseous products were nitrous oxide (46% to 51%), nitrogen (22% to 32%), and ammonia (17% to 28%). Formate and hexamethylene-tetramine (hexamine) account for effectively 100% of the carbon-bearing aqueous species. Nitrate, nitrite, and acetate were present in the liquid in trace amounts. The process effectively treated molding powders of the plastic-bonded explosives PBX 9501 (2.5% estane), LX-04 (15% viton), and PBX 9404 (3% nitrocellulose). Results were compared with those achieved using sodium hydroxide solutions at 150 C in a pressurized reactor.

  13. Thermophysical properties of two ammonium-based protic ionic liquids

    PubMed Central

    Bhattacharjee, Arijit; Coutinho, João A. P.; Freire, Mara G.; Carvalho, Pedro J.

    2015-01-01

    Experimental data for density, viscosity, refractive index and surface tension are reported, for the first time, in the temperature range between 288.15 K and 353.15 K and at atmospheric pressure for two protic ionic liquids, namely 2-(dimethylamino)-N,N-dimethylethan-1-ammonium acetate, [N11{2(N11)}H][CH3CO2], and N-ethyl-N,N-dimethylammonium phenylacetate, [N112H][C7H7CO2]. The effect of the anion aromaticity and the cation’s aliphatic tails on the studied properties is discussed. From the measured properties temperature dependency the derived properties, such as the isobaric thermal expansion coefficient, the surface entropy and enthalpy, and the critical temperature, were estimated. PMID:26435554

  14. Hygroscopic behavior of atmospherically relevant water-soluble carboxylic salts and their influence on the water uptake of ammonium sulfate

    NASA Astrophysics Data System (ADS)

    Wu, Z. J.; Nowak, A.; Poulain, L.; Herrmann, H.; Wiedensohler, A.

    2011-03-01

    The hygroscopic behavior of atmospherically relevant water-soluble carboxylic salts and their effects on ammonium sulfate was investigated using a hygroscopicity tandem differential mobility analyzer (H-TDMA). No hygroscopic growth is observed for sodium oxalate, while ammonium oxalate shows slight growth (growth factor = 1.05 at 90%). The growth factors at 90% RH for sodium acetate, sodium malonate, sodium succinate, sodium tartrate, ammonium tartrate, sodium pyruvate, sodium maleate, and humic acid sodium salt are 1.79, 1.78, 1.69, 1.54, 1.29, 1.70, 1.78, and 1.19, respectively. The mixtures of organic salts with ammonium sulfate, which are prepared simulating the atmospheric aerosols, are determined. A clear shift in DRH of mixture to lower RH is observed with increasing organic mass fraction. Above RH = 80%, the humidograms of the different mixtures are quite close to that of pure ammonium sulfate. Köhler theory is used to predict the effective hygroscopicity parameter, κ, for mixtures at 90% RH. The results show that Köhler theory underestimated kappa for mixtures without considering the water solubility of ammonium oxalate. However, if the water solubility of ammonium oxalate is taken into account, the results show a much better agreement with those derived from H-TDMA measurements.

  15. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  16. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  17. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  18. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  19. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  20. Equilibrium studies of sodium-ammonium potassium-ammonium, and calcium-ammonium exchanges on clinoptilolite zeolite

    SciTech Connect

    Jama, M.A.; Yuecel, H. )

    1989-12-01

    Forward and reverse ion-exchange isotherms for the binary sodium-ammonium, potassium-ammonium, and calcium-ammonium systems on clinoptilolite have been measured in aqueous solutions at a total concentration of 0.1 equiv/dm{sup 3} and at 298 K. Prior to exchange experiments it was attempted to prepare homoionic forms of the zeolite by exhaustive treatments with appropriate salt solutions of cations. With no binary exchanges, full replacement of the cation by the ammonium ion is observed, which conflicts with some earlier work on clinoptilolite. Despite the observed partial exchange levels, clinoptilolite shows a very high preference for ammonium ion over sodium and calcium but not over potassium. Thermodynamic values for the exchanges were calculated and compared with data in the literature. Both the selectivity and thermodynamic affinity sequence, in agreement with previous work reported in the literature, are K{sup +} > NH{sub 4}{sup +} > Na{sup +} > Ca{sup 2+}.

  1. Separation of Trivalent Actinides from Lanthanides in an Acetate Buffer Solution Using Cyanex 301

    SciTech Connect

    Jack D. Law; Dean R. Peterman; Terry A. Todd; Richard D. Tillotson

    2006-05-01

    The separation of trivalent actinides from the lanthanides using the active extractant in the Cyanex 301 reagent, bis(2,4,4-trimethylpentyl)dithiophosphinic acid, was studied. Specifically, the extractant was studied for an ammonium acetate/acetic acid buffered feed that would result from a transuranic separation process utilizing an ammonium acetate strip solution. Separation factors of 241Am from 154Eu with this extractant, as a function of total acetate concentration and pH, have been measured. Additionally, the extraction behavior of stable La, Ce, Pr, Nd, Sm, and Eu was measured. Separation factors were typically very high for Am from Eu at a pH ranging from 3.8 to 5.8 and a total acetate concentration ranging from 0.2 M to 1.0 M. However, separation factors across the lanthanide series varied considerably and resulted in separation of the lighter lanthanides from the heavier lanthanides at the higher pH’s.

  2. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    .... No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid. It may be produced by the calcium hydroxide neutralization of acetic acid. (b) The ingredient meets...

  3. 76 FR 46907 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ...This proposed rule would implement anti-terrorism measures to better secure the homeland. The Department of Homeland Security would regulate the sale and transfer of ammonium nitrate pursuant to section 563 of the Fiscal Year 2008 Department of Homeland Security Appropriations Act with the purpose of preventing the use of ammonium nitrate in an act of terrorism. This proposed rule seeks......

  4. Biodegradation of rocket propellant waste, ammonium perchlorate

    NASA Technical Reports Server (NTRS)

    Naqvi, S. M. Z.; Latif, A.

    1975-01-01

    The short term effects of ammonium perchlorate on selected organisms were studied. A long term experiment was also designed to assess the changes incurred by ammonium perchlorate on the nitrogen and chloride contents of soil within a period of 3 years. In addition, an attempt was made to produce methane gas from anaerobic fermentation of the aquatic weed, Alternanthera philoxeroides.

  5. 76 FR 62311 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... FR 64280 (advance notice of proposed rulemaking); 76 FR 46908 (notice of proposed rulemaking... Program Web site in mid-October at http://www.dhs.gov/ files/ ] programs/ammonium-nitrate-security-program...; ] DEPARTMENT OF HOMELAND SECURITY Office of the Secretary 6 CFR Part 31 RIN 1601-AA52 Ammonium Nitrate...

  6. Ammonium nonanoate broadcast application over onions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Ammonium nonanoate occurs in nature and is primarily formed from biodegradation of higher fatty acids. Racer (40% ammonium nonaoate) is a potential contact herbicide for weed control in organic crop production. Field research was conducted in southeast Oklahoma (Atoka County, Lane, OK) to determin...

  7. Evolution of Electrogenic Ammonium Transporters (AMTs)

    PubMed Central

    McDonald, Tami R.; Ward, John M.

    2016-01-01

    The ammonium transporter gene family consists of three main clades, AMT, MEP, and Rh. The evolutionary history of the AMT/MEP/Rh gene family is characterized by multiple horizontal gene transfer events, gene family expansion and contraction, and gene loss; thus the gene tree for this family of transporters is unlike the organismal tree. The genomes of angiosperms contain genes for both electrogenic and electroneutral ammonium transporters, but it is not clear how far back in the land plant lineage electrogenic ammonium transporters occur. Here, we place Marchantia polymorpha ammonium transporters in the AMT/MEP/Rh phylogeny and we show that AMTs from the liverwort M. polymorpha are electrogenic. This information suggests that electrogenic ammonium transport evolved at least as early as the divergence of bryophytes in the land plant lineage. PMID:27066024

  8. Evolution of Electrogenic Ammonium Transporters (AMTs).

    PubMed

    McDonald, Tami R; Ward, John M

    2016-01-01

    The ammonium transporter gene family consists of three main clades, AMT, MEP, and Rh. The evolutionary history of the AMT/MEP/Rh gene family is characterized by multiple horizontal gene transfer events, gene family expansion and contraction, and gene loss; thus the gene tree for this family of transporters is unlike the organismal tree. The genomes of angiosperms contain genes for both electrogenic and electroneutral ammonium transporters, but it is not clear how far back in the land plant lineage electrogenic ammonium transporters occur. Here, we place Marchantia polymorpha ammonium transporters in the AMT/MEP/Rh phylogeny and we show that AMTs from the liverwort M. polymorpha are electrogenic. This information suggests that electrogenic ammonium transport evolved at least as early as the divergence of bryophytes in the land plant lineage. PMID:27066024

  9. Ammonium-induced calcium mobilization in 1321N1 astrocytoma cells

    SciTech Connect

    Hillmann, Petra; Koese, Meryem; Soehl, Kristina; Mueller, Christa E.

    2008-02-15

    High blood levels of ammonium/ammonia (NH{sub 4}{sup +}/NH{sub 3}) are associated with severe neurotoxicity as observed in hepatic encephalopathy (HE). Astrocytes are the main targets of ammonium toxicity, while neuronal cells are less vulnerable. In the present study, an astrocytoma cell line 1321N1 and a neuroblastoma glioma hybrid cell line NG108-15 were used as model systems for astrocytes and neuronal cells, respectively. Ammonium salts evoked a transient increase in intracellular calcium concentrations ([Ca{sup 2+}]{sub i}) in astrocytoma (EC{sub 50} = 6.38 mM), but not in NG108-15 cells. The ammonium-induced increase in [Ca{sup 2+}]{sub i} was due to an intracellular effect of NH{sub 4}{sup +}/NH{sub 3} and was independent of extracellular calcium. Acetate completely inhibited the ammonium effect. Ammonium potently reduced calcium signaling by G{sub q} protein-coupled receptors (H{sub 1} and M3) expressed on the cells. Ammonium (5 mM) also significantly inhibited the proliferation of 1321N1 astrocytoma cells. While mRNA for the mammalian ammonium transporters RhBG and RhCG could not be detected in 1321N1 astrocytoma cells, both transporters were expressed in NG108-15 cells. RhBG and RhBC in brain may promote the excretion of NH{sub 3}/NH{sub 4}{sup +} from neuronal cells. Cellular uptake of NH{sub 4}{sup +}/NH{sub 3} was mainly by passive diffusion of NH{sub 3}. Human 1321N1 astrocytoma cells appear to be an excellent, easily accessible human model for studying HE, which can substitute animal studies, while NG108-15 cells may be useful for investigating the role of the recently discovered Rhesus family type ammonium transporters in neuronal cells. Our findings may contribute to the understanding of pathologic ammonium effects in different brain cells, and to the treatment of hyperammonemia.

  10. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  11. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  12. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  13. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  14. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  15. Antibiofilm Properties of Acetic Acid

    PubMed Central

    Bjarnsholt, Thomas; Alhede, Morten; Jensen, Peter Østrup; Nielsen, Anne K.; Johansen, Helle Krogh; Homøe, Preben; Høiby, Niels; Givskov, Michael; Kirketerp-Møller, Klaus

    2015-01-01

    Bacterial biofilms are known to be extremely tolerant toward antibiotics and other antimicrobial agents. These biofilms cause the persistence of chronic infections. Since antibiotics rarely resolve these infections, the only effective treatment of chronic infections is surgical removal of the infected implant, tissue, or organ and thereby the biofilm. Acetic acid is known for its antimicrobial effect on bacteria in general, but has never been thoroughly tested for its efficacy against bacterial biofilms. In this article, we describe complete eradication of both Gram-positive and Gram-negative biofilms using acetic acid both as a liquid and as a dry salt. In addition, we present our clinical experience of acetic acid treatment of chronic wounds. In conclusion, we here present the first comprehensive in vitro and in vivo testing of acetic acid against bacterial biofilms. PMID:26155378

  16. The nucleation kinetics of ammonium metavanadate precipitated by ammonium chloride

    NASA Astrophysics Data System (ADS)

    Du, Guangchao; Sun, Zhaohui; Xian, Yong; Jing, Han; Chen, Haijun; Yin, Danfeng

    2016-05-01

    The nucleation kinetics of ammonium metavanadate (NH4VO3) was investigated under conditions of the simulated process for precipitation of NH4VO3 from the vanadium-containing solution. Induction periods for the nucleation of NH4VO3 were experimentally determined as a function of supersaturation at temperatures from 30 to 45 °C. Using the classical nucleation theory, the interfacial tension between NH4VO3 and supersaturated solution, the nucleation rate and critical radius of nucleus for the homogeneous nucleation of NH4VO3 were estimated. With temperature increasing, the calculated interfacial tension gradually decreased from 29.78 mJ/m2 at 30 °C to 23.66 mJ/m2 at 45 °C. The nucleation rate was found to proportionally increase but the critical radius of nucleus exponentially decreased, with increase in supersaturation ratio at a constant temperature. The activation energy for NH4VO3 nucleation was obtained from the relationship between temperature and induction period, ranging from 79.17 kJ/mol at S=25 to 115.50 kJ/mol at S=15. FT-IR and Raman spectrum indicated that the crystals obtained in the precipitation process were NH4VO3.

  17. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  18. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  19. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  20. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  1. 21 CFR 73.1298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by oxidizing... product is filtered, washed, and dried. The pigment consists principally of ferric ammonium...

  2. Ammonium Hydrosulfide: Coloring Jupiter's Clouds

    NASA Astrophysics Data System (ADS)

    Loeffler, Mark J.; Hudson, Reggie L.; Chanover, Nancy J.; Simon, Amy A.

    2015-11-01

    The appearance and composition of Jupiter’s Great Red Spot (GRS) have been studied for over a century, yet there still is no consensus for what is causing the GRS’s color. As the GRS is believed to originate in tropospheric clouds, it seems likely that one or more cloud components may contribute to the GRS's color. Recently, we have begun to investigate whether either ammonium hydrosulfide (NH4SH), a predicted cloud component, or its radiation-chemical products can produce color and/or an ultraviolet-visible spectrum similar to what has been observed on Jupiter via remote sensing (e.g., Simon et al., 2015). Our initial experiments relied on infrared spectroscopy to quantify the radiolytic and thermal stability of NH4SH and to identify the new chemical products formed during MeV ion irradiation (Loeffler et al., 2015). This DPS presentation will cover some of our most recent results detailing the ultraviolet-visible spectral and color changes observed during irradiation and post-irradiation warming of NH4SH ices. This work is funded by NASA’s Outer Planets and Planetary Atmospheres programs.

  3. Phase diagram of ammonium nitrate

    SciTech Connect

    Dunuwille, Mihindra; Yoo, Choong-Shik

    2013-12-07

    Ammonium Nitrate (AN) is a fertilizer, yet becomes an explosive upon a small addition of chemical impurities. The origin of enhanced chemical sensitivity in impure AN (or AN mixtures) is not well understood, posing significant safety issues in using AN even today. To remedy the situation, we have carried out an extensive study to investigate the phase stability of AN and its mixtures with hexane (ANFO–AN mixed with fuel oil) and Aluminum (Ammonal) at high pressures and temperatures, using diamond anvil cells (DAC) and micro-Raman spectroscopy. The results indicate that pure AN decomposes to N{sub 2}, N{sub 2}O, and H{sub 2}O at the onset of the melt, whereas the mixtures, ANFO and Ammonal, decompose at substantially lower temperatures. The present results also confirm the recently proposed phase IV-IV{sup ′} transition above 17 GPa and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400°C.

  4. Hygroscopic behavior of atmospherically relevant water-soluble carboxylic salts and their influence on the water uptake of ammonium sulfate

    NASA Astrophysics Data System (ADS)

    Wu, Z. J.; Nowak, A.; Poulain, L.; Herrmann, H.; Wiedensohler, A.

    2011-12-01

    The hygroscopic behavior of atmospherically relevant water-soluble carboxylic salts and their effects on ammonium sulfate were investigated using a hygroscopicity tandem differential mobility analyzer (H-TDMA). No hygroscopic growth is observed for disodium oxalate, while ammonium oxalate shows slight growth (growth factor = 1.05 at 90%). The growth factors at 90% RH for sodium acetate, disodium malonate, disodium succinate, disodium tartrate, diammonium tartrate, sodium pyruvate, disodium maleate, and humic acid sodium salt are 1.79, 1.78, 1.69, 1.54, 1.29, 1.70, 1.78, and 1.19, respectively. The hygroscopic growth of mixtures of organic salts with ammonium sulfate, which are prepared as surrogates of atmospheric aerosols, was determined. A clear shift in deliquescence relative humidity to lower RH with increasing organic mass fraction was observed for these mixtures. Above 80% RH, the contribution to water uptake by the organic salts was close to that of ammonium sulfate for the majority of investigated compounds. The observed hygroscopic growth of the mixed particles at RH above the deliquescence relative humidity of ammonium sulfate agreed well with that predicted using the Zdanovskii-Stokes-Robinson (ZSR) mixing rule. Mixtures of ammonium sulfate with organic salts are more hygroscopic than mixtures with organic acids, indicating that neutralization by gas-phase ammonia and/or association with cations of dicarbonxylic acids may enhance the hygroscopicity of the atmospheric particles.

  5. Metabolic adaptation of microbial communities to ammonium stress in a high solid anaerobic digester with dewatered sludge.

    PubMed

    Dai, Xiaohu; Yan, Han; Li, Ning; He, Jin; Ding, Yueling; Dai, Lingling; Dong, Bin

    2016-01-01

    A high solid digester with dewatered sludge was operated for 110 days to ascertain the interactions between bacterial and archaeal communities under ammonium stress, as well as the corresponding changes in bio-degradation mechanisms. The volatile solids reduction (95% confidence intervals in mean) changed from 31.6 ± 0.9% in the stable period (day 40-55) to 21.3 ± 1.5% in the last period (day 71-110) when ammonium concentration was elevated to be within 5,000-6,000 mgN/L. Biogas yield dropped accordingly from 11.9 ± 0.3 to 10.4 ± 0.2 L/d and carbon dioxide increased simultaneously from 35.2% to 44.8%. Anaerobranca better adapted to the ammonium stress, while the initially dominant protein-degrading microbes-Tepidimicrobium and Proteiniborus were suppressed, probably responsible for the increase of protein content in digestate. Meanwhile, Methanosarcina, as the dominant Archaea, was resistant to ammonium stress with the constant relative abundance of more than 92% during the whole operation. Nonmetric Multidimensional Scaling (NMDS) analysis was thus conducted which indicated that the gradually increased TAN dictated the bacterial clusters. The dominant Methanosarcina and the increased carbon dioxide content under ammonium stress suggested that, rather than the commonly acknowledged syntrophic acetate oxidation (SAO) with hydrogenotrophic methanogenesis, only SAO pathway was enhanced during the initial 'ammonium inhibition'. PMID:27312792

  6. Effects of soil phosphorus status on environmental risk assessment of glyphosate and glufosinate-ammonium.

    PubMed

    Laitinen, Pirkko; Siimes, Katri; Rämö, Sari; Jauhiainen, Lauri; Eronen, Liisa; Oinonen, Seija; Hartikainen, Helinä

    2008-01-01

    The increased use of herbicides poses a risk to the aquatic environment. Easy and economical methods are needed to identify the fields where specific environment protection measures are needed. Phosphorus (P) and organophosphorus herbicides compete for the same adsorption sites in soil. In this study the relationship between P obtained in routine Finnish agronomic tests (acid ammonium acetate [P(AC)]) and adsorption of glyphosate and glufosinate-ammonium was investigated to determine whether P(AC) values could be used in the risk assessment. The adsorption of glyphosate ((N-(phosphonomethyl)glycine) and glufosinate-ammonium (2-amino-4-(hydroxymethylphosphinyl)butanoic acid) was studied in a clay and a sandy loam soil enriched with increasing amounts of P added as potassium dihydrogen phosphate. Desorption was also determined for some P-enriched soil samples. The adsorption of both herbicides diminished with increasing P(AC) value. The correlations between Freundlich adsorption coefficients obtained in the adsorption tests and P(AC) were nonlinear but significant (r > 0.98) in both soils. The exponential models of the relationship between soil P(AC) values and glyphosate adsorption were found to fit well to an independent Finnish soil data set (P < 0.1 for glyphosate and P < 0.01 for glufosinate-ammonium). The desorption results showed that glufosinate-ammonium sorption is not inversely related to soil P status, and the high correlation coefficients obtained in the test of the model were thus artifacts caused by an abnormal concentration of exchangeable potassium in soil. The solved equations are a useful tool in assessing the leaching risks of glyphosate, but their use for glufosinate-ammonium is questionable. PMID:18453404

  7. Biodegradation of rocket propellent waste, ammonium perchlorate

    NASA Technical Reports Server (NTRS)

    Naqui, S. M. Z.

    1975-01-01

    The impact of the biodegradation rate of ammonium perchlorate on the environment was studied in terms of growth, metabolic rate, and total biomass of selected animal and plant species. Brief methodology and detailed results are presented.

  8. Leaching of lead by ammonium salts and EDTA from Salvinia minima biomass produced during aquatic phytoremediation.

    PubMed

    Núñez-López, Roberto Aurelio; Meas, Yunny; Gama, Silvia Citlalli; Borges, Raúl Ortega; Olguín, Eugenia J

    2008-06-15

    Plant biomass harvested after heavy-metal phytoremediation must be considered as a hazardous waste that should be contained or treated appropriately before disposal or reuse. As a potential method to detoxify the biomass and to convert this material to a suitable fertilizer or mulch, leaching of lead (Pb) from Salvinia minima biomass was studied by testing water, several aqueous ammonium salts, and EDTA solution as lead extractants. The research was carried out in two phases: (i) a leaching study to determine the lead-extraction efficiency of the different leachants, and (ii) a thermodynamic analysis to identify the likely reactions and stable Pb(II) species formed in the leaching systems of the most efficient leachants. Experimentally, lead concentrations measured in leached biomass and in leachates were significantly different among the various leachants. It was determined that the extraction strength of the leachants followed the order: EDTA>ammonium oxalate>water approximately ammonium nitrate>ammonium acetate, achieving Pb extraction efficiencies of 99%, 70%, 7.2%, 6.9% and 1.3%, respectively, in single-stage extractions. The thermodynamic study indicated that the dominant species produced by the leaching process should be the soluble species PbEDTA2- for EDTA system, and the insoluble Pb(COO)2S precipitate for the oxalate system. PMID:18078711

  9. Microbiome response to controlled shifts in ammonium and LCFA levels in co-digestion systems.

    PubMed

    Regueiro, Leticia; Carballa, Marta; Lema, Juan M

    2016-02-20

    Anaerobic co-digestion using protein-rich and lipid-rich co-substrates is limited by the accumulation of ammonia and long chain fatty acids (LCFAs), which are important inhibitors of the anaerobic microorganisms. This work aimed to study the microbial community dynamics during gradual and abrupt increase in ammonium and LCFAs concentrations by applying several molecular techniques, as well as during gradual decrease. For this purpose, two anaerobic reactors co-digesting three agro-industrial wastes underwent abrupt and gradual changes of ammonium and LCFAs concentrations. Both variations provoked volatile fatty acids (VFAs) accumulation, mainly acetic acid up to 4.5gL(-1). High ammonium levels were correlated to an increase in Pseudomonadaceae, Carnobacteriaceae and Clostridiadaceae families and to a drop in Syntrophomonadaceae. However, high LCFA levels provoked an increase in the Anaerobaculaceae and Peptococcaceae families. Both perturbations resulted in greater variations in the archaeal domain, going from Methanosaeta dominance in steady state to hydrogenotrophic pathway during the disturbance periods. During the abrupt changes, Bacteria domain experienced a minimal change, which indicates the adaptation bacterial populations to high ammonium and LCFAs levels. Species belonging to Porphyromonadaceae and Tissierellaceae families linked to VFAs consumption rose their presence during the recovery period. This study identifies a subset of microbial communities linked to high ammonia and LCFA concentrations, useful for optimizing the high-rate co-digestion processes dealing with lipid and protein-rich co-substrates. PMID:26778540

  10. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Calcium acetate. 184.1185 Section 184.1185 Food and... Substances Affirmed as GRAS § 184.1185 Calcium acetate. (a) Calcium acetate (Ca (C2H3O2)2, CAS Reg. No. 62-54-4), also known as acetate of lime or vinegar salts, is the calcium salt of acetic acid. It may...

  11. Electrochemically and bioelectrochemically induced ammonium recovery.

    PubMed

    Gildemyn, Sylvia; Luther, Amanda K; Andersen, Stephen J; Desloover, Joachim; Rabaey, Korneel

    2015-01-01

    Streams such as urine and manure can contain high levels of ammonium, which could be recovered for reuse in agriculture or chemistry. The extraction of ammonium from an ammonium-rich stream is demonstrated using an electrochemical and a bioelectrochemical system. Both systems are controlled by a potentiostat to either fix the current (for the electrochemical cell) or fix the potential of the working electrode (for the bioelectrochemical cell). In the bioelectrochemical cell, electroactive bacteria catalyze the anodic reaction, whereas in the electrochemical cell the potentiostat applies a higher voltage to produce a current. The current and consequent restoration of the charge balance across the cell allow the transport of cations, such as ammonium, across a cation exchange membrane from the anolyte to the catholyte. The high pH of the catholyte leads to formation of ammonia, which can be stripped from the medium and captured in an acid solution, thus enabling the recovery of a valuable nutrient. The flux of ammonium across the membrane is characterized at different anolyte ammonium concentrations and currents for both the abiotic and biotic reactor systems. Both systems are compared based on current and removal efficiencies for ammonium, as well as the energy input required to drive ammonium transfer across the cation exchange membrane. Finally, a comparative analysis considering key aspects such as reliability, electrode cost, and rate is made. This video article and protocol provide the necessary information to conduct electrochemical and bioelectrochemical ammonia recovery experiments. The reactor setup for the two cases is explained, as well as the reactor operation. We elaborate on data analysis for both reactor types and on the advantages and disadvantages of bioelectrochemical and electrochemical systems. PMID:25651406

  12. Influence of ammonium availability on expression of nifD and amtB genes during biostimulation of a U(VI) contaminated aquifer: implications for U(VI) removal and monitoring the metabolic state of Geobacteraceae

    SciTech Connect

    Mouser, Paula J.; N'Guessan, A. Lucie; Elifantz, Hila; Holmes, Dawn E.; Williams, Kenneth H; Wilkins, Michael J.; Long, Philip E.; Lovley, Derek R.

    2009-03-25

    The influence of ammonium availability on bacterial community structure and the physiological status of Geobacter species during in situ bioremediation of uranium-contaminated groundwater was evaluated. Ammonium concentrations varied by 2 orders of magnitude (<4 to 400 ?M) across the study site. Analysis of 16S rRNA sequences suggested that ammonium may have been one factor influencing the community composition prior to acetate amendment with Rhodoferax species predominating over Geobacter species with higher ammonium and Dechloromonas species dominating at the site with lowest ammonium. However, once acetate was added and dissimilatory metal reduction was stimulated, Geobacter species became the predominant organisms at all locations. Rates of U(VI) reduction appeared to be more related to acetate concentrations rather than ammonium levels. In situ mRNA transcript abundance of the nitrogen fixation gene, nifD, and the ammonium transporter gene, amtB, in Geobacter species indicated that ammonium was the primary source of nitrogen during uranium reduction. The abundance of amtB was inversely correlated to ammonium levels, whereas nifD transcript levels were similar across all sites examined. These results suggest that nifD and amtB expression are closely regulated in response to ammonium availability to ensure an adequate supply of nitrogen while conserving cell resources. Thus, quantifying nifD and amtB transcript expression appears to be a useful approach for monitoring the nitrogen-related physiological status of subsurface Geobacter species. This study also emphasizes the need for more detailed analysis of geochemical and physiological interactions at the field scale in order to adequately model subsurface microbial processes during bioremediation.

  13. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  14. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  15. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  16. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  17. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  18. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  19. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Iron ammonium citrate. 172.430 Section 172.430 Food... Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in food in... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  20. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Iron ammonium citrate. 172.430 Section 172.430... CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in... human consumption so that the level of iron ammonium citrate does not exceed 25 parts per million...

  1. 21 CFR 573.560 - Iron ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Iron ammonium citrate. 573.560 Section 573.560... Additive Listing § 573.560 Iron ammonium citrate. Iron ammonium citrate may be safely used in animal feed... consumption so that the level of iron ammonium citrate does not exceed 25 parts per million (0.0025...

  2. Desmopressin Acetate in Intracranial Haemorrhage

    PubMed Central

    Kapapa, Thomas; Röhrer, Stefan; Struve, Sabine; Petscher, Matthias; König, Ralph; Wirtz, Christian Rainer; Woischneck, Dieter

    2014-01-01

    Introduction. The secondary increase in the size of intracranial haematomas as a result of spontaneous haemorrhage or trauma is of particular relevance in the event of prior intake of platelet aggregation inhibitors. We describe the effect of desmopressin acetate as a means of temporarily stabilising the platelet function. Patients and Methods. The platelet function was analysed in 10 patients who had received single (N = 4) or multiple (N = 6) doses of acetylsalicylic acid and 3 patients (control group) who had not taken acetylsalicylic acid. All subjects had suffered intracranial haemorrhage. Analysis was performed before, half an hour and three hours after administration of desmopressin acetate. Statistical analysis was performed by applying a level of significance of P ≤ 0.05. Results. (1) Platelet function returned to normal 30 minutes after administration of desmopressin acetate. (2) The platelet function worsened again after three hours. (3) There were no complications related to electrolytes or fluid balance. Conclusion. Desmopressin acetate can stabilise the platelet function in neurosurgical patients who have received acetylsalicylic acid prior to surgery without causing transfusion-related side effects or a loss of time. The effect is, however, limited and influenced by the frequency of drug intake. Further controls are needed in neurosurgical patients. PMID:25610644

  3. Low Temperature Double-Layer Capacitors Using Asymmetric and Spiro-Type Quaternary Ammonium Salts

    NASA Technical Reports Server (NTRS)

    Brandon, Erik J. (Inventor); Smart, Marshall C. (Inventor); West, William C. (Inventor)

    2014-01-01

    Double-layer capacitors capable of operating at extremely low temperatures (e.g., as low as -80.degree. C.) are disclosed. Electrolyte solutions combining a base solvent (e.g., acetonitrile) and a cosolvent are employed to lower the melting point of the base electrolyte. Example cosolvents include methyl formate, ethyl acetate, methyl acetate, propionitrile, butyronitrile, and 1,3-dioxolane. A quaternary ammonium salt including at least one of triethylmethylammonium tetrafluoroborate (TEMATFB) and spiro-(1,1')-bipyrrolidium tetrafluoroborate (SBPBF.sub.4), is used in an optimized concentration (e.g., 0.10 M to 0.75 M), dissolved into the electrolyte solution. Conventional device form factors and structural elements (e.g., porous carbon electrodes and a polyethylene separator) may be employed.

  4. Purification and characterization of an alkaline protease from Acetes chinensis

    NASA Astrophysics Data System (ADS)

    Xu, Jiachao; Liu, Xin; Li, Zhaojie; Xu, Jie; Xue, Changhu; Gao, Xin

    2005-07-01

    An alkaline protease from Acetes chinensis was purified and characterized in this study. The steps of purification include ammonium sulfate precipitation, ion-exchange chromatography with Q-sepharose Fast Flow, gel filtration chromatography with S300 and the second ion-exchange chromatography with Q-sepharose Fast Flow. The protease was isolated and purified, which was present and active on protein substrates (azocasein and casein). The specific protease activity was 17.15 folds and the recovery was 4.67. The molecular weight of the protease was estimated at 23.2 kD by SDS-PAGE. With azocasein as the susbstrate, the optimal temperature was 55°C and the optimal pH value was 5.5. Ion Ca2+ could enhance the proteolytic activity of the protease, while Cu2+, EDTA and PMSF could inhibit its activity.

  5. Reductive opening of carbohydrate phenylsulfonylethylidene (PSE) acetals.

    PubMed

    Chéry, Florence; Cabianca, Elena; Tatibouët, Arnaud; De Lucchi, Ottorino; Lindhorst, Thisbe K; Rollin, Patrick

    2015-11-19

    The phenylsulfonylethylidene (PSE) acetal is a relatively new protecting group in carbohydrate chemistry. However, carbohydrate-derived phenylsulfonylethylidene (PSE) acetals show a different behavior in reductive desulfonylation than simple symmetrical acetals. Here we have investigated various SET-type reaction conditions in order to open PSE acetals regioselectively and to produce chiral ω-hydroxyethenyl ethers. Whereas sodium amalgam leads to a mixture of regioisomeric vinyl ethers besides the ethylidene acetal, samarium iodide is suited for regioselective ring opening. This is shown with seven different carbohydrate PSE acetals, both of the 1,3-dioxane and the 1,3-dioxolane type. PMID:26469209

  6. Calcium sulphate in ammonium sulphate solution

    USGS Publications Warehouse

    Sullivan, E.C.

    1905-01-01

    Calcium sulphate, at 25?? C., is two-thirds as soluble in dilute (o.i mol per liter) and twice as soluble in concentrated (3 mois per liter) ammonium sulphate solution as in water. The specific electric conductivity of concentrated ammonium sulphate solutions is lessened by saturating with calcium sulphate. Assuming that dissociation of ammonium sulphate takes place into 2NH4?? and SO4" and of calcium sulphate into Ca and SO4" only, and that the conductivity is a measure of such dissociation, the solubility of calcium sulphate in dilute ammonium sulphate solutions is greater than required by the mass-law. The conductivity of the dilute mixtures may be accurately calculated by means of Arrhenius' principle of isohydric solutions. In the data obtained in these calculations, the concentration of non-dissociated calcium sulphate decreases with increasing ammonium sulphate. The work as a whole is additional evidence of the fact that we are not yet in possession of all the factors necessary for reconciling the mass-law to the behavior of electrolytes. The measurements above described were made in the chemical laboratory of the University of Michigan.

  7. Benchmark binding energies of ammonium and alkyl-ammonium ions interacting with water. Are ammonium-water hydrogen bonds strong?

    NASA Astrophysics Data System (ADS)

    Vallet, Valérie; Masella, Michel

    2015-01-01

    Alkyl-ammonium ion/water interactions are investigated using high level quantum computations, yielding thermodynamics data in good agreement with gas-phase experiments. Alkylation and hydration lead to weaken the NHsbnd O hydrogen bonds. Upon complete hydration by four water molecules, their main features are close to those of the OHsbnd O bond in the isolated water dimer. Energy decomposition analyses indicate that hydration of alkyl-ammonium ions are mainly due to electrostatic/polarization effects, as for hard monoatomic cations, but with a larger effect of dispersion.

  8. 21 CFR 522.533 - Deslorelin acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Deslorelin acetate. (a) Specifications. Each implant contains 2.1 milligrams deslorelin acetate. (b) Sponsor.... One implant per mare. (ii) Indications for use. For inducing ovulation within 48 hours in...

  9. Carbon-isotopic analysis of dissolved acetate

    NASA Technical Reports Server (NTRS)

    Gelwicks, J. T.; Hayes, J. M.

    1990-01-01

    Heating of dried, acetate-containing solids together with oxalic acid dihydrate conveniently releases acetic acid for purification by gas chromatography. For determination of the carbon-isotopic composition of total acetate, the acetate-containing zone of the chromatographic effluent can be routed directly to a combustion furnace coupled to a vacuum system allowing recovery, purification, and packaging of CO2 for mass-spectrometric analysis. For analysis of methyl carbon, acetic acid can be cryogenically trapped from the chromatographic effluent, then transferred to a tube containing excess NaOH. The tube is evacuated, sealed, and heated to 500 degrees C to produce methane by pyrolysis of sodium acetate. Subsequent combustion of the methane allows determination of the 13C content at the methyl position in the parent acetate. With typical blanks, the standard deviation of single analyses is less than 0.4% for acetate samples larger than 5 micromoles. A full treatment of uncertainties is outlined.

  10. Ozone decomposition in aqueous acetate solutions

    SciTech Connect

    Sehested, K.; Holcman, J.; Bjergbakke, E.; Hart, E.J.

    1987-01-01

    The acetate radical ion reacts with ozone with a rate constant of k = (1.5 +/- 0.5) x 10Z dmT mol s . The products from this reaction are CO2, HCHO, and O2 . By subsequent reaction of the peroxy radical with ozone the acetate radical ion is regenerated through the OH radical. A chain decomposition of ozone takes place. It terminates when the acetate radical ion reacts with oxygen forming the unreactive peroxy acetate radical. The chain is rather short as oxygen is developed, as a result of the ozone consumption. The inhibiting effect of acetate on the ozone decay is rationalized by OH scavenging by acetate and successive reaction of the acetate radical ion with oxygen. Some products from the bimolecular disappearance of the peroxy acetate radicals, however, react further with ozone, reducing the effectiveness of the stabilization.

  11. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and....1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3 or C2H3O2Na·3H2O, CAS Reg. No. 6131-90-4) is the sodium salt of acetic acid and occurs naturally in plant and animal tissues....

  12. On the evaporation of ammonium sulfate solution

    PubMed Central

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.

    2009-01-01

    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 ± 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor–liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly. PMID:19861551

  13. On the effective ionic radii for ammonium.

    PubMed

    Sidey, Vasyl

    2016-08-01

    A set of effective ionic radii corresponding to different coordination numbers (CNs) and compatible with the radii system by Shannon [Acta Cryst. (1976), A32, 751-767] has been derived for ammonium: 1.40 Å (CN = IV), 1.48 Å (CN = VI), 1.54 Å (CN = VIII) and 1.67 Å (CN = XII). The bond-valence parameters r0 = 2.3433 Å and B = 0.262 Å have been determined for ammonium-fluorine bonds. PMID:27484382

  14. On the evaporation of ammonium sulfate solution

    SciTech Connect

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.

    2009-07-16

    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 {+-} 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor-liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly.

  15. Ammonium uptake by nitrogen fixing bacteria I. Azotobacter vinelandii.

    PubMed

    Kleiner, D

    1975-06-22

    Both the changes in the activities of nitrogenase, glutamine synthetase and glutamate dehydrogenase and in the extracellular and intracellular NH4+ concentrations were investigated during the transition from an NH4+ free medium to one containing NH4+ ions for a continuous culture of Azotobacter vinelandii. If added in amounts causing 80-100% repression of nitrogenase, ammonium acetate, lactate and phosphate are absorbed completely, whereas chloride, sulfate and citrate are only taken up to about 80%. After about 1-2 hrs the NH4+ remaining in the medium is absorbed too, indicating the induction or activation of a new NH4+ transport system. One of the new permeases allows the uptake of citrate in the presence of sucrose. Addition of inorganic NH4+ level leads to a reversible rise in the glutamine synthetase activity which is not prevented by chloramphenicol, and to a reversible decrease in nitrogenase activity. During these measurements glutamate dehydrogenase activity remains close to zero. The intracellular NH4+ level of about 0.6 mM does not change when extracellular NH4+ is taken up and repression of nitrogenase starts. PMID:239660

  16. Kinetics of the Methanogenic Fermentation of Acetate

    PubMed Central

    Fukuzaki, Satoshi; Nishio, Naomichi; Nagai, Shiro

    1990-01-01

    Inhibition of the fermentation of acetate to methane and carbon dioxide by acetate was analyzed with an acetate-acclimatized sludge and with Methanosarcina barkeri Fusaro under mesophilic conditions. A second-order substrate inhibition model, qch4 = qmS/[Ks + S + (S2/Ki)], where S was the concentration of undissociated acetic acid, not ionized acetic acid, could be applicable in both cases. The analysis resulted in substrate saturation constants, Ks, of 4.0 μM for the acclimatized sludge and 104 μM for M. barkeri. The threshold concentrations of undissociated acetic acid when no further acetate utilization was observed were 0.078 μM (pH 7.50) for the acclimatized sludge and 4.43 μM (pH 7.45) for M. barkeri. These kinetic results suggested that the concentration of undissociated acetic acid became a key factor governing the actual threshold acetate concentration for acetate utilization and that the acclimatized sludge in which Methanothrix spp. appeared dominant could utilize acetate better and survive at a lower concentration of undissociated acetic acid than could M. barkeri. Images PMID:16348323

  17. 21 CFR 522.2476 - Trenbolone acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... days. (A) 140 milligrams (mg) trenbolone acetate (one implant consisting of 7 pellets, each pellet containing 20 mg trenbolone acetate) per implant dose. (B) 140 mg trenbolone acetate (one implant consisting... 29 mg tylosin tartrate) per implant dose. (ii) Indications for use. For improved feed...

  18. 21 CFR 522.2476 - Trenbolone acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... days. (A) 140 milligrams (mg) trenbolone acetate (one implant consisting of 7 pellets, each pellet containing 20 mg trenbolone acetate) per implant dose. (B) 140 mg trenbolone acetate (one implant consisting... 29 mg tylosin tartrate) per implant dose. (ii) Indications for use. For improved feed...

  19. 21 CFR 522.2476 - Trenbolone acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... days. (A) 140 milligrams (mg) trenbolone acetate (one implant consisting of 7 pellets, each pellet containing 20 mg trenbolone acetate) per implant dose. (B) 140 mg trenbolone acetate (one implant consisting... 29 mg tylosin tartrate) per implant dose. (ii) Indications for use. For improved feed...

  20. 21 CFR 522.2476 - Trenbolone acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... days. (A) 140 milligrams (mg) trenbolone acetate (one implant consisting of 7 pellets, each pellet containing 20 mg trenbolone acetate) per implant dose. (B) 140 mg trenbolone acetate (one implant consisting... 29 mg tylosin tartrate) per implant dose. (ii) Indications for use. For improved feed...

  1. 21 CFR 582.6185 - Calcium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Calcium acetate. 582.6185 Section 582.6185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Calcium acetate. (a) Product. Calcium acetate. (b) Conditions of use. This substance is...

  2. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  3. 21 CFR 184.1005 - Acetic acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Acetic acid. 184.1005 Section 184.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD....1005 Acetic acid. (a) Acetic acid (C2H4O2, CAS Reg. No. 64-19-7) is known as ethanoic acid. It...

  4. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  5. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  6. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  7. 21 CFR 582.1005 - Acetic acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Acetic acid. 582.1005 Section 582.1005 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1005 Acetic acid. (a) Product. Acetic acid. (b) Conditions of use. This substance is...

  8. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  9. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  10. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  11. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  12. 21 CFR 582.1721 - Sodium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium acetate. 582.1721 Section 582.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1721 Sodium acetate. (a) Product. Sodium acetate. (b) Conditions of use. This substance is...

  13. Acet-oxy-γ-valerolactone.

    PubMed

    Tristram, Cameron; Gainsford, Graeme J; Hinkley, Simon

    2013-06-01

    Levulinyl cellulose esters have been produced as an effective renewable binder for architectural coatings. The title compound, C7H10O4 (systematic name: 2-methyl-5-oxo-tetra-hydro-furan-2-yl acetate), assigned as the esterifying species, was isolated and crystallized to confirm the structure. In the crystal, the mol-ecules pack in layers parallel to (102) utilizing weak C-H⋯O inter-actions. PMID:23795112

  14. Asaia bogorensis gen. nov., sp. nov., an unusual acetic acid bacterium in the alpha-Proteobacteria.

    PubMed

    Yamada, Y; Katsura, K; Kawasaki, H; Widyastuti, Y; Saono, S; Seki, T; Uchimura, T; Komagata, K

    2000-03-01

    Eight Gram-negative, aerobic, rod-shaped and peritrichously flagellated strains were isolated from flowers of the orchid tree (Bauhinia purpurea) and of plumbago (Plumbago auriculata), and from fermented glutinous rice, all collected in Indonesia. The enrichment culture approach for acetic acid bacteria was employed, involving use of sorbitol medium at pH 3.5. All isolates grew well at pH 3.0 and 30 degrees C. They did not oxidize ethanol to acetic acid except for one strain that oxidized ethanol weakly, and 0.35% acetic acid inhibited their growth completely. However, they oxidized acetate and lactate to carbon dioxide and water. The isolates grew well on mannitol agar and on glutamate agar, and assimilated ammonium sulfate for growth on vitamin-free glucose medium. The isolates produced acid from D-glucose, D-fructose, L-sorbose, dulcitol and glycerol. The quinone system was Q-10. DNA base composition ranged from 59.3 to 61.0 mol% G + C. Studies of DNA relatedness showed that the isolates constitute a single species. Phylogenetic analysis based on their 16S rRNA gene sequences indicated that the isolates are located in the acetic acid bacteria lineage, but distant from the genera Acetobacter, Gluconobacter, Acidomonas and Gluconacetobacter. On the basis of the above characteristics, the name Asaia bogorensis gen. nov., sp. nov. is proposed for these isolates. The type strain is isolate 71T (= NRIC 0311T = JCM 10569T). PMID:10758893

  15. 21 CFR 184.1133 - Ammonium alginate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...: Category of food Maximum level of use in food (as served) (percent) Functional use Confections, frostings... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium alginate. 184.1133 Section 184.1133 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  16. 21 CFR 184.1133 - Ammonium alginate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium alginate. 184.1133 Section 184.1133 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  17. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  18. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  19. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  20. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  1. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  2. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  3. 21 CFR 582.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium carbonate. 582.1137 Section 582.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  4. 21 CFR 582.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium hydroxide. 582.1139 Section 582.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  5. 21 CFR 582.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ammonium bicarbonate. 582.1135 Section 582.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose...

  6. Diamond Head Revisited with Ammonium Dichromate.

    ERIC Educational Resources Information Center

    Arrigoni, Edward

    1981-01-01

    The classroom demonstration using ammonium dichromate to simulate a volcanic eruption can be modified into a more dramatic and accurate representation of the geologic processes involved in the formation of a volcanic crater. The materials, demonstration setup, safety procedures, and applications to instruction are presented. (Author/WB)

  7. Near infrared detection of ammonium minerals.

    USGS Publications Warehouse

    Krohn, M.D.; Altaner, S.P.

    1987-01-01

    Diagnostic near-infrared spectral features have been identified for minerals with ammonium (NH4+) bound in the crystal structure. Near-infrared detection of NH4-bearing minerals may provide useful information for prospecting for certain ore deposits and may provide a better understanding of the nitrogen cycle within geologic environments.-from Authors

  8. 21 CFR 556.375 - Maduramicin ammonium.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Maduramicin ammonium. 556.375 Section 556.375 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS TOLERANCES FOR RESIDUES OF NEW ANIMAL DRUGS IN FOOD Specific Tolerances for Residues of New Animal Drugs §...

  9. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in...) To assure safe use of the additive, in addition to the other information required by the Federal Food... labeled as containing ammonium formate. (d) To assure safe use of the additive, in addition to the...

  10. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in...) To assure safe use of the additive, in addition to the other information required by the Federal Food... labeled as containing ammonium formate. (d) To assure safe use of the additive, in addition to the...

  11. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in a... safe use of the additive, in addition to the other information required by the Federal Food, Drug, and... ammonium formate. (d) To assure safe use of the additive, in addition to the other information required...

  12. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  13. 21 CFR 184.1143 - Ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium sulfate. 184.1143 Section 184.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  14. 21 CFR 184.1137 - Ammonium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium carbonate. 184.1137 Section 184.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  15. Cyclo­hexyl­ammonium nitrate

    PubMed Central

    Bagabas, Abdulaziz A.; Aboud, Mohamed F. A.; Shemsi, Ahsan M.; Addurihem, Emad S.; Al-Othman, Zeid A.; Chidan Kumar, C. S.; Fun, Hoong-Kun

    2014-01-01

    In the title salt, C6H14N+·NO3 −, the cyclo­hexyl ring adopts a chair conformation. The ammonium group occupies an equatorial position and the crystal struture is stabilized by inter­molecular N—H⋯O hydrogen-bonding inter­actions, resulting in a three-dimensional network. PMID:24764971

  16. 76 FR 70366 - Ammonium Nitrate Security Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-14

    ... Department previously announced a series of public meetings on the same topic on October 2, 2011 (see 76 FR... public comment on August 3, 2011. See 73 FR 64280 (advance notice of proposed rulemaking); 76 FR 46908... the Department's Ammonium Nitrate Security Program Web site, at...

  17. MECHANISM BY WHICH AMMONIUM FERTILIZERS KILL LARKSPUR

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Environmental concerns of using pesticides on public lands have greatly reduced the use of herbicides to control tall larkspur (Delphinium barbeyi). Alternative methods of control have used ammonium sulfate placed in the crown of individual plants to kill larkspur. The objective of this study was ...

  18. 76 FR 47238 - Ammonium Nitrate From Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ...)). Background The Commission instituted this review on March 1, 2011 (76 FR 11273) and determined on June 6, 2011 that it would conduct an expedited review (76 FR 34749, June 14, 2011). The Commission transmitted... COMMISSION Ammonium Nitrate From Russia Determination On the basis of the record \\1\\ developed in the...

  19. 21 CFR 573.170 - Ammonium formate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) The additive is manufactured by the reaction of 99.5 percent ammonia gas and 99 percent formic acid in a continuous loop reactor to produce a solution made up of 37 percent ammonium salt of formic acid and 62 percent formic acid. (b) The additive is used or intended for use as a feed acidifying...

  20. 21 CFR 184.1139 - Ammonium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 20, which is incorporated by reference. Copies are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium hydroxide. 184.1139 Section 184.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  1. 21 CFR 184.1135 - Ammonium bicarbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 19, which is incorporated... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium bicarbonate. 184.1135 Section 184.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED)...

  2. Propionate Oxidation by and Methanol Inhibition of Anaerobic Ammonium-Oxidizing Bacteria

    PubMed Central

    Güven, Didem; Dapena, Ana; Kartal, Boran; Schmid, Markus C.; Maas, Bart; van de Pas-Schoonen, Katinka; Sozen, Seval; Mendez, Ramon; Op den Camp, Huub J. M.; Jetten, Mike S. M.; Strous, Marc; Schmidt, Ingo

    2005-01-01

    Anaerobic ammonium oxidation (anammox) is a recently discovered microbial pathway and a cost-effective way to remove ammonium from wastewater. Anammox bacteria have been described as obligate chemolithoautotrophs. However, many chemolithoautotrophs (i.e., nitrifiers) can use organic compounds as a supplementary carbon source. In this study, the effect of organic compounds on anammox bacteria was investigated. It was shown that alcohols inhibited anammox bacteria, while organic acids were converted by them. Methanol was the most potent inhibitor, leading to complete and irreversible loss of activity at concentrations as low as 0.5 mM. Of the organic acids acetate and propionate, propionate was consumed at a higher rate (0.8 nmol min−1 mg of protein−1) by Percoll-purified anammox cells. Glucose, formate, and alanine had no effect on the anammox process. It was shown that propionate was oxidized mainly to CO2, with nitrate and/or nitrite as the electron acceptor. The anammox bacteria carried out propionate oxidation simultaneously with anaerobic ammonium oxidation. In an anammox enrichment culture fed with propionate for 150 days, the relative amounts of anammox cells and denitrifiers did not change significantly over time, indicating that anammox bacteria could compete successfully with heterotrophic denitrifiers for propionate. In conclusion, this study shows that anammox bacteria have a more versatile metabolism than previously assumed. PMID:15691967

  3. Biochar alleviates combined stress of ammonium and acids by firstly enriching Methanosaeta and then Methanosarcina.

    PubMed

    Lü, Fan; Luo, Chenghao; Shao, Liming; He, Pinjing

    2016-03-01

    This investigation evaluated the effectiveness of biochar of different particle sizes in alleviating ammonium (NH4(+)) inhibition (up to 7 g-N/L) during anaerobic digestion of 6 g/L glucose. Compared to the control treatment without biochar addition, treatments that included biochar particles 2-5 mm, 0.5-1 mm and 75-150 μm in size reduced the methanization lag phase by 23.9%, 23.8% and 5.9%, respectively, and increased the maximum methane production rate by 47.1%, 23.5% and 44.1%, respectively. These results confirmed that biochar accelerated the initiation of methanization during anaerobic digestion under double inhibition risk from both ammonium and acids. Furthermore, fine biochar significantly promoted the production of volatile fatty acids (VFAs). Comparative analysis on the archaeal and bacterial diversity at the early and later stages of digestion, and in the suspended, biochar loosely bound, and biochar tightly bound fractions suggested that, in suspended fractions, hydrogenotrophic Methanobacterium was actively resistant to ammonium. However, acetoclastic Methanosaeta can survive at VFAs concentrations up to 60-80 mmol-C/L by improved affinity to conductive biochar, resulting in the accelerated initiation of acetate degradation. Improved methanogenesis was followed by the colonization of the biochar tightly bound fractions by Methanosarcina. The selection of appropriate biochar particles sizes was important in facilitating the initial colonization of microbial cells. PMID:26724437

  4. The role of the anion in the reaction of reducing sugars with ammonium salts.

    PubMed

    Agyei-Aye, Kwasi; Chian, May X; Lauterbach, John H; Moldoveanu, Serban C

    2002-11-19

    Reactions of reducing sugars with ammonia and its compounds are important commercially, particularly in the preparation of flavors and caramel colors. However, such reactions generally produce a complex series of products ranging from simple molecules to complex polymeric materials, particularly since commercial systems generally involve mixtures of sugars as opposed to single sugars. This complexity has made understanding the mechanisms of such reactions difficult. Therefore, investigatory work has generally been focused on model systems. Herein we report one such study with model systems: the effects of the nature of the anion of the reactions of reducing sugars with ammonium salts. D-Glucose was reacted in aqueous solution with each of the following ammonium salts: acetate, bicarbonate, carbonate, chloride, citrate, formate, monohydrogenphosphate (DAP), sulfate, and sulfite. These reactions were carried out in a Parr bomb at 93 degrees C for 2.5 h. The initial pH of the reaction mixtures was adjusted to pH 8.0 at 25 degrees C. The resulting mixtures were analyzed by LC-MS, and the results were analyzed by comparing the product yields and distributions with those obtained with DAP. The major reaction product of interest was 2,6-deoxyfructosazine, as it had been shown to be a marker for the polymeric material formed from such reactions. It was found that ammonium salts of weak acids were much more effective in effecting the desired reactions than were those of strong acids; however, none was as effective as DAP. PMID:12433492

  5. 40 CFR 721.4095 - Quaternary ammonium alkyltherpropyl trialkylamine halides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... trialkylamine halides. 721.4095 Section 721.4095 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.4095 Quaternary ammonium alkyltherpropyl trialkylamine halides. (a... generically as quaternary ammonium alkyltherpropyl trialkylamine halides (PMNs...

  6. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) ammonium citrate, CAS Reg. No. 1332-98-5) is a complex salt of undetermined structure composed of 16.5 to... (iron (III) ammonium citrate, CAS Reg. No. 1333-00-2) is a complex salt of undetermined...

  7. 40 CFR 721.10099 - Dialkyl dimethyl ammonium carbonate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate... Specific Chemical Substances § 721.10099 Dialkyl dimethyl ammonium carbonate (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (1:1) (PMN P-03-715) is subject to reporting under...

  8. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  9. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  10. 40 CFR 721.10302 - Zinc ammonium phosphate (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Zinc ammonium phosphate (generic). 721... Substances § 721.10302 Zinc ammonium phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as zinc ammonium phosphate (PMN...

  11. 40 CFR 721.10591 - Tertiary ammonium compound (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tertiary ammonium compound (generic... Specific Chemical Substances § 721.10591 Tertiary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-11-110) is subject to reporting under this section for the significant new...

  12. 40 CFR 721.10591 - Tertiary ammonium compound (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary ammonium compound (generic... Specific Chemical Substances § 721.10591 Tertiary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-11-110) is subject to reporting under this section for the significant new...

  13. 40 CFR 721.10582 - Quaternary ammonium compound (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Quaternary ammonium compound (generic... Specific Chemical Substances § 721.10582 Quaternary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-10-571) is subject to reporting under this section for the significant new...

  14. 40 CFR 721.10582 - Quaternary ammonium compound (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Quaternary ammonium compound (generic... Specific Chemical Substances § 721.10582 Quaternary ammonium compound (generic). (a) Chemical substance and... ammonium compound (PMN P-10-571) is subject to reporting under this section for the significant new...

  15. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  16. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  17. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  18. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  19. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  20. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  1. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  2. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  3. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Multiple Purpose GRAS Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions of use. This substance is...

  4. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  5. 21 CFR 582.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Aluminum ammonium sulfate. 582.1127 Section 582.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate. (b) Conditions...

  6. 21 CFR 182.1127 - Aluminum ammonium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Aluminum ammonium sulfate. 182.1127 Section 182.1127 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1127 Aluminum ammonium sulfate. (a) Product. Aluminum ammonium sulfate....

  7. 21 CFR 73.1025 - Ferric ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Ferric ammonium citrate. 73.1025 Section 73.1025 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1025 Ferric ammonium citrate. (a) Identity. The color additive ferric ammonium...

  8. 21 CFR 172.430 - Iron ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Iron ammonium citrate. 172.430 Section 172.430... ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Anticaking Agents § 172.430 Iron ammonium citrate. Iron ammonium citrate may be safely used in food in accordance with the...

  9. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  10. 40 CFR 721.10430 - Tetra alkyl ammonium salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tetra alkyl ammonium salt (generic... Specific Chemical Substances § 721.10430 Tetra alkyl ammonium salt (generic). (a) Chemical substance and... ammonium salt (PMN P-97-823) is subject to reporting under this section for the significant new...

  11. 40 CFR 721.10511 - Quaternary ammonium salts (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Quaternary ammonium salts (generic... Specific Chemical Substances § 721.10511 Quaternary ammonium salts (generic). (a) Chemical substance and... ammonium salts (PMNs P-07-320, P-07-321, P-07-322, P-07-323, and P-07-324) are subject to reporting...

  12. 40 CFR 721.10511 - Quaternary ammonium salts (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Quaternary ammonium salts (generic... Specific Chemical Substances § 721.10511 Quaternary ammonium salts (generic). (a) Chemical substance and... ammonium salts (PMNs P-07-320, P-07-321, P-07-322, P-07-323, and P-07-324) are subject to reporting...

  13. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  14. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ammonium phosphate, monobasic. 184.1141a Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic (NH4H2PO4, CAS Reg. No. 7722-76-1) is manufactured by reacting ammonia...

  15. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium phosphate, monobasic. 184.1141a Section 184.1141a Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Affirmed as GRAS § 184.1141a Ammonium phosphate, monobasic. (a) Ammonium phosphate, monobasic...

  16. 21 CFR 184.1141b - Ammonium phosphate, dibasic.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ammonium phosphate, dibasic. 184.1141b Section 184.1141b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... as GRAS § 184.1141b Ammonium phosphate, dibasic. (a) Ammonium phosphate, dibasic ((NH4)2HPO4, CAS...

  17. Detonation Properties of Ammonium Dinitramide (ADN)

    NASA Astrophysics Data System (ADS)

    Wätterstam, A.; Östmark, H.; Helte, A.; Karlsson, S.

    1999-06-01

    Ammonium Dinitramide, ADN, has a potential as an oxidizer for underwater high explosives. Pure ADN has a large reaction-zone length and shows a strong non-ideal behaviour. The work presented here is an extension of previous work.(Sensitivity and Performance Characterization of Ammonium Dinitramide (ADN). Presented at 11th International Detonation Symposium, Snowmass, CO, 1998.) Experiments for determining the detonation velocity as a function of inverse charge radius and density, reaction-zone length and curvature, and the detonation pressure are presented. Measurements of pressure indicates that no, or weak von-Neumann spike exists, suggesting an immediate chemical decomposition. Experimental data are compared with predicted using thermochemical codes and ZND-theory.

  18. Ammonium and methylammonium transport in Rhodobacter sphaeroides

    SciTech Connect

    Cordts, M.L.

    1988-01-01

    The properties of two ammonium transport systems, including a novel NH{sub 4}{sup +}-specific system, were studied in the phototrophic bacterium Rhodobacter sphaeroides 2.4.1. The organism's ability to transport NH{sub 4}{sup +} was characterized by: (1) filtration assays of the analog, {sup 14}CH{sub 3}NH{sub 3}{sup +} and (2) comparison of extracellular and intracellular NH{sub 4}{sup +} concentrations determined chemically under various conditions. Both {sup 14}CH{sub 3}NH{sub 3}{sup +} transport and maintenance of intracellular NH{sub 4}{sup +} pools were observed when glutamine synthetase was inhibited by methionine sulfoximine, suggesting ammonium transport and assimilation occurred independently.

  19. Role of anaerobic ammonium oxidation (anammox) in nitrogen removal from a freshwater aquifer

    USGS Publications Warehouse

    Smith, Richard L.; Bohlke, John Karl; B. Song; C. Tobias

    2015-01-01

    Anaerobic ammonium oxidation (anammox) couples the oxidation of ammonium with the reduction of nitrite, producing N2. The presence and activity of anammox bacteria in groundwater were investigated at multiple locations in an aquifer variably affected by a large, wastewater-derived contaminant plume. Anammox bacteria were detected at all locations tested using 16S rRNA gene sequencing and quantification of hydrazine oxidoreductase (hzo) gene transcripts. Anammox and denitrification activities were quantified by in situ 15NO2–tracer tests along anoxic flow paths in areas of varying ammonium, nitrate, and organic carbon abundances. Rates of denitrification and anammox were determined by quantifying changes in 28N2, 29N2, 30N2, 15NO3–, 15NO2–, and 15NH4+ with groundwater travel time. Anammox was present and active in all areas tested, including where ammonium and dissolved organic carbon concentrations were low, but decreased in proportion to denitrification when acetate was added to increase available electron supply. Anammox contributed 39–90% of potential N2 production in this aquifer, with rates on the order of 10 nmol N2–N L–1 day–1. Although rates of both anammox and denitrification during the tracer tests were low, they were sufficient to reduce inorganic nitrogen concentrations substantially during the overall groundwater residence times in the aquifer. These results demonstrate that anammox activity in groundwater can rival that of denitrification and may need to be considered when assessing nitrogen mass transport and permanent loss of fixed nitrogen in aquifers.

  20. A robust method for ammonium nitrogen isotopic analysis in freshwater and seawater at natural abundance levels

    NASA Astrophysics Data System (ADS)

    Zhang, L.; Altabet, M. A.; Wu, T.; Hadas, O.

    2006-12-01

    Natural ammonium N isotopic abundance has been increasingly used in studies of marine and freshwater biogeochemistry. However, current methods are time-consuming, subject to interference from DON, and not reliable at low concentrations. Our new method for determining the δ15N of ammonium overcomes these difficulties by employing the oxidation of ammonium to nitrite followed by conversion of nitrite to nitrous oxide. In the first step, ammonium is quantitatively oxidized by hypobromite at pH~12. After the addition of sodium arsenite to consume excess hypobromite, yield is verified by colorimetric NO2-measurement using sulfanilamide and naphthyl ethylenediamine (NED). Nitrite is further reduced to N2O by a 1:1 sodium azide and acetic acid buffer solution using previously established procedures. Buffer concentration can be varied according to sample matrix to ensure that a reaction pH between 2 and 4 is reached. The product nitrous oxide is then isotopically analyzed using a continuous flow purge and cryogenic trap system coupled to an isotope ratio mass spectrometer. Reliable δ15N values (±0.31‰) are obtained over a concentration range of 0.5 μM to 20 μM using 20 ml volumes of either fresh or seawater samples. Reagent blanks are very low, about 0.05 μM. There is no interference from any of the nitrogen containing compounds tested except short chain aliphatic amino acid (i.e. glycine) which typically are not present at sufficiently high environmental concentrations to pose a problem.

  1. Role of Anaerobic Ammonium Oxidation (Anammox) in Nitrogen Removal from a Freshwater Aquifer.

    PubMed

    Smith, Richard L; Böhlke, J K; Song, Bongkeun; Tobias, Craig R

    2015-10-20

    Anaerobic ammonium oxidation (anammox) couples the oxidation of ammonium with the reduction of nitrite, producing N2. The presence and activity of anammox bacteria in groundwater were investigated at multiple locations in an aquifer variably affected by a large, wastewater-derived contaminant plume. Anammox bacteria were detected at all locations tested using 16S rRNA gene sequencing and quantification of hydrazine oxidoreductase (hzo) gene transcripts. Anammox and denitrification activities were quantified by in situ (15)NO2(-) tracer tests along anoxic flow paths in areas of varying ammonium, nitrate, and organic carbon abundances. Rates of denitrification and anammox were determined by quantifying changes in (28)N2, (29)N2, (30)N2, (15)NO3(-), (15)NO2(-), and (15)NH4(+) with groundwater travel time. Anammox was present and active in all areas tested, including where ammonium and dissolved organic carbon concentrations were low, but decreased in proportion to denitrification when acetate was added to increase available electron supply. Anammox contributed 39-90% of potential N2 production in this aquifer, with rates on the order of 10 nmol N2-N L(-1) day(-1). Although rates of both anammox and denitrification during the tracer tests were low, they were sufficient to reduce inorganic nitrogen concentrations substantially during the overall groundwater residence times in the aquifer. These results demonstrate that anammox activity in groundwater can rival that of denitrification and may need to be considered when assessing nitrogen mass transport and permanent loss of fixed nitrogen in aquifers. PMID:26401911

  2. Optical constants of concentrated aqueous ammonium sulfate.

    NASA Technical Reports Server (NTRS)

    Remsberg, E. E.

    1973-01-01

    Using experimental data obtained from applying spectroscopy to a 39-wt-% aqueous ammonium sulfate solution, it is shown that, even though specific aerosol optical constants appear quite accurate, spectral variations may exist as functions of material composition or concentration or both. Prudent users of optical constant data must then include liberal data error estimates when performing calculations or in interpreting spectroscopic surveys of collected aerosol material.

  3. Corrosion and repairs of ammonium carbamate decomposers

    SciTech Connect

    De Romero, M.F.; Galban, J.P.

    1996-05-01

    Corrosion-erosion problems occurred in the carbon steel base metal of the ammonium carbamate decomposers in an urea extraction process lined with type 316L (UNS S31603) urea grade stainless steel. The cladding was replaced by weld overlay using a semiautomatic gas metal arc welding process. The first layer was alloy 25%Cr-15%Ni-2%Mo (UNS W30923); the second layer was alloy 25%Cr-22%Ni-2%Mo (UNS W31020).

  4. Metabolic adaptation of microbial communities to ammonium stress in a high solid anaerobic digester with dewatered sludge

    PubMed Central

    Dai, Xiaohu; Yan, Han; Li, Ning; He, Jin; Ding, Yueling; Dai, Lingling; Dong, Bin

    2016-01-01

    A high solid digester with dewatered sludge was operated for 110 days to ascertain the interactions between bacterial and archaeal communities under ammonium stress, as well as the corresponding changes in bio-degradation mechanisms. The volatile solids reduction (95% confidence intervals in mean) changed from 31.6 ± 0.9% in the stable period (day 40–55) to 21.3 ± 1.5% in the last period (day 71–110) when ammonium concentration was elevated to be within 5,000–6,000 mgN/L. Biogas yield dropped accordingly from 11.9 ± 0.3 to 10.4 ± 0.2 L/d and carbon dioxide increased simultaneously from 35.2% to 44.8%. Anaerobranca better adapted to the ammonium stress, while the initially dominant protein-degrading microbes-Tepidimicrobium and Proteiniborus were suppressed, probably responsible for the increase of protein content in digestate. Meanwhile, Methanosarcina, as the dominant Archaea, was resistant to ammonium stress with the constant relative abundance of more than 92% during the whole operation. Nonmetric Multidimensional Scaling (NMDS) analysis was thus conducted which indicated that the gradually increased TAN dictated the bacterial clusters. The dominant Methanosarcina and the increased carbon dioxide content under ammonium stress suggested that, rather than the commonly acknowledged syntrophic acetate oxidation (SAO) with hydrogenotrophic methanogenesis, only SAO pathway was enhanced during the initial ‘ammonium inhibition’. PMID:27312792

  5. PROCESS FOR THE PRODUCTION OF AMMONIUM URANIUM FLUORIDE

    DOEpatents

    Ellis, A.S.; Mooney, R.B.

    1953-08-25

    This patent relates to the preparation of ammonium uranium fluoride. The process comprises adding a water soluble fluoride to an aqueous solution of a uranous compound containing an ammonium salt, and isolating the resulting precipitate. This patent relates to the manufacture of uranium tetnafluoride from ammonium uranium fluoride, NH/sub 4/UF/sub 5/. Uranium tetrafluoride is prepared by heating the ammonium uranium fluoride to a temperature at which dissociation occurs with liberation of ammonium fluoride. Preferably the process is carried out under reduced pressure, or in a current of an inert gas.

  6. Oxidation of ammonium sulfite in aqueous solutions using ozone technology

    NASA Astrophysics Data System (ADS)

    Li, Yue; Shang, Kefeng; Lu, Na; Li, Jie; Wu, Yan

    2013-03-01

    How to deal with unstable ammonium sulfite, the byproduct of flue gas desulfuration by ammonia absorption methods, has been a difficult problem in recent years. Oxidation of ammonium sulfite in aqueous solutions using ozone produced by a surface discharge system was investigated in the paper. The oxidation efficiency of ammonium sulfite by ozone and traditional air aeration were compared, and the factors including ozone concentration, gas flow rate, initial concentration of ammonium sulfite solution and reaction temperature were discussed. The results show that the oxidation efficiency of ammonium sulfite by ozone technology reached nearly 100% under the optimum conditions, which had a significant increase compared with that by air aeration.

  7. Detection of the Ammonium Ion in Space

    NASA Astrophysics Data System (ADS)

    Cernicharo, J.; Tercero, B.; Fuente, A.; Domenech, J. L.; Cueto, M.; Carrasco, E.; Herrero, V. J.; Tanarro, I.; Marcelino, N.; Roueff, E.; Gerin, M.; Pearson, J.

    2013-07-01

    We report on the detection of a narrow feature at 262816.73 MHz toward Orion and the cold prestellar core B1-bS which we attribute to the 10-00 line of the deuterated ammonium ion, NH3D+. The observations were performed with the IRAM 30 m radio telescope. The carrier has to be a light molecular species as it is the only feature detected over 3.6 GHz of bandwidth. The hyperfine structure is not resolved, indicating a very low value for the electric quadrupolar coupling constant of nitrogen which is expected for NH3D+ as the electric field over the N nucleus is practically zero. Moreover, the feature is right at the predicted frequency for the 10-00 transition of the ammonium ion, 262817 ± 6 MHz (3σ), using rotational constants derived from new infrared data obtained in our laboratory in Madrid. The estimated column density is (1.1 ± 0.2) × 1012 cm-2. Assuming a deuterium enhancement similar to that of NH2D, we derive N(NH_4^+) ~= 2.6 × 1013 cm-2, i.e., an abundance for ammonium of a few 10-11. This work was based on observations carried out with the IRAM 30 m telescope. IRAM is supported by INSU/CNRS (France), MPG (Germany), and IGN (Spain)

  8. DETECTION OF THE AMMONIUM ION IN SPACE

    SciTech Connect

    Cernicharo, J.; Tercero, B.; Fuente, A.; Domenech, J. L.; Cueto, M.; Carrasco, E.; Herrero, V. J.; Tanarro, I.; Marcelino, N.; Roueff, E.; Gerin, M.; Pearson, J.

    2013-07-01

    We report on the detection of a narrow feature at 262816.73 MHz toward Orion and the cold prestellar core B1-bS which we attribute to the 1{sub 0}-0{sub 0} line of the deuterated ammonium ion, NH{sub 3}D{sup +}. The observations were performed with the IRAM 30 m radio telescope. The carrier has to be a light molecular species as it is the only feature detected over 3.6 GHz of bandwidth. The hyperfine structure is not resolved, indicating a very low value for the electric quadrupolar coupling constant of nitrogen which is expected for NH{sub 3}D{sup +} as the electric field over the N nucleus is practically zero. Moreover, the feature is right at the predicted frequency for the 1{sub 0}-0{sub 0} transition of the ammonium ion, 262817 {+-} 6 MHz (3{sigma}), using rotational constants derived from new infrared data obtained in our laboratory in Madrid. The estimated column density is (1.1 {+-} 0.2) Multiplication-Sign 10{sup 12} cm{sup -2}. Assuming a deuterium enhancement similar to that of NH{sub 2}D, we derive N(NH{sub 4}{sup +}) {approx_equal} 2.6 Multiplication-Sign 10{sup 13} cm{sup -2}, i.e., an abundance for ammonium of a few 10{sup -11}.

  9. Equation of State of Ammonium Nitrate

    NASA Astrophysics Data System (ADS)

    Robbins, David L.; Sheffield, Stephen A.; Dattelbaum, Dana M.; Velisavljevic, Nenad; Stahl, David B.

    2009-12-01

    Ammonium nitrate (AN) is a widely used fertilizer and mining explosive. AN is commonly used in ammonium nitrate-fuel oil (ANFO), which is a mixture of explosive-grade AN prills and fuel oil in a 94:6 ratio by weight. ANFO is a non-ideal explosive with measured detonation velocities around 4 km/s. The equation of state properties and known initiation behavior of neat AN are limited. We present the results of a series of gas gun-driven plate impact experiments on pressed neat ammonium nitrate at 1.72 g/cm3. No evidence of initiation was observed under shock loading to 22 GPa. High pressure x-ray diffraction experiments in diamond anvil cells provided insight into the high pressure phase behavior over the same pressure range (to 25 GPa), as well as a static isotherm at ambient temperature. From the isotherm and thermodynamic properties at ambient conditions, a preliminary unreacted equation of state (EOS) has been developed based on the Murnaghan isotherm and Helmholtz formalism [1], which compares favorably with the available experimental Hugoniot data on several densities of AN.

  10. Understanding Palladium Acetate from a User Perspective.

    PubMed

    Carole, William A; Colacot, Thomas J

    2016-06-01

    The behavior of palladium acetate is reviewed with respect to its synthesis, characterization, structure (in both solution and solid state), and activation pathways. In addition, comparisons of catalytic activities between pure palladium acetate and two common byproducts, Pd3 (OAc)5 (NO2 ) and polymeric [Pd(OAc)2 ]n , typically present in commercially available material are reviewed. Hence, this minireview serves as a concise guide for the users of palladium acetate from both academia and industry. PMID:27125630

  11. 21 CFR 184.1005 - Acetic acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Acetic acid. 184.1005 Section 184.1005 Food and... Substances Affirmed as GRAS § 184.1005 Acetic acid. (a) Acetic acid (C2H4O2, CAS Reg. No. 64-19-7) is known as ethanoic acid. It occurs naturally in plant and animal tissues. It is produced by fermentation...

  12. 21 CFR 184.1005 - Acetic acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Acetic acid. 184.1005 Section 184.1005 Food and... Substances Affirmed as GRAS § 184.1005 Acetic acid. (a) Acetic acid (C2H4O2, CAS Reg. No. 64-19-7) is known as ethanoic acid. It occurs naturally in plant and animal tissues. It is produced by fermentation...

  13. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  14. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  15. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... sodium sulfate and sodium bicarbonate. (b) The ingredient meets the specifications of the Food Chemicals... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and... Substances Affirmed as GRAS § 184.1721 Sodium acetate. (a) Sodium acetate (C2H3O2Na, CAS Reg. No. 127-09-3...

  16. Nitrate removal by organotrophic anaerobic ammonium oxidizing bacteria with C2/C3 fatty acid in upflow anaerobic sludge blanket reactors.

    PubMed

    Liang, Yuhai; Li, Dong; Zhang, Xiaojing; Zeng, Huiping; Yang, Yin; Zhang, Jie

    2015-10-01

    In anaerobic ammonium oxidation (Anammox) process, a harsh ratio of nitrite to ammonia in influent was demanded, and the max nitrogen removal efficiency could only achieve to 89%, both of which limited the development of Anammox. The aim of this work was to study the nitrate removal by organotrophic anaerobic ammonium oxidizing bacteria (AAOB) with C2/C3 fatty acid in upflow anaerobic sludge blanket (UASB) reactors. In this study, organotrophic AAOB was successfully enriched by adding acetate and propionate with the total organic carbon to nitrogen (TOC/N) ratio of 0.1. In the condition of low substrate, the TN removal efficiency reached 90%, with the effluent TN of around 11.8 mg L(-1). After the addition of acetate and propionate, the predominant species in Anammox granular sludge transformed to Candidatus Jettenia that belonging to organotrophic AAOB from the Candidatus Kuenenia relating to general AAOB. PMID:26151852

  17. Genome-guided analysis of physiological capacities of Tepidanaerobacter acetatoxydans provides insights into environmental adaptations and syntrophic acetate oxidation.

    PubMed

    Müller, Bettina; Manzoor, Shahid; Niazi, Adnan; Bongcam-Rudloff, Erik; Schnürer, Anna

    2015-01-01

    This paper describes the genome-based analysis of Tepidanaerobacter acetatoxydans strain Re1, a syntrophic acetate-oxidising bacterium (SAOB). Principal issues such as environmental adaptations, metabolic capacities, and energy conserving systems have been investigated and the potential consequences for syntrophic acetate oxidation discussed. Briefly, in pure culture, T. acetatoxydans grows with different organic compounds and produces acetate as the main product. In a syntrophic consortium with a hydrogenotrophic methanogen, it can also reverse its metabolism and instead convert acetate to formate/H2 and CO2. It can only proceed if the product formed is continuously removed. This process generates a very small amount of energy that is scarcely enough for growth, which makes this particular syntrophy of special interest. As a crucial member of the biogas-producing community in ammonium-rich engineered AD processes, genomic features conferring ammonium resistance, bacterial defense, oxygen and temperature tolerance were found, as well as attributes related to biofilm formation and flocculation. It is likely that T. acetatoxydans can form an electrochemical gradient by putative electron-bifurcating Rnf complex and [Fe-Fe] hydrogenases, as observed in other acetogens. However, genomic deficiencies related to acetogenic metabolism and anaerobic respiration were discovered, such as the lack of formate dehydrogenase and F1F0 ATP synthase. This has potential consequences for the metabolic pathways used under SAO and non-SAO conditions. The two complete sets of bacteriophage genomes, which were found to be encoded in the genome, are also worthy of mention. PMID:25811859

  18. Genome-Guided Analysis of Physiological Capacities of Tepidanaerobacter acetatoxydans Provides Insights into Environmental Adaptations and Syntrophic Acetate Oxidation

    PubMed Central

    Niazi, Adnan; Bongcam-Rudloff, Erik; Schnürer, Anna

    2015-01-01

    This paper describes the genome-based analysis of Tepidanaerobacter acetatoxydans strain Re1, a syntrophic acetate-oxidising bacterium (SAOB). Principal issues such as environmental adaptations, metabolic capacities, and energy conserving systems have been investigated and the potential consequences for syntrophic acetate oxidation discussed. Briefly, in pure culture, T. acetatoxydans grows with different organic compounds and produces acetate as the main product. In a syntrophic consortium with a hydrogenotrophic methanogen, it can also reverse its metabolism and instead convert acetate to formate/H2 and CO2. It can only proceed if the product formed is continuously removed. This process generates a very small amount of energy that is scarcely enough for growth, which makes this particular syntrophy of special interest. As a crucial member of the biogas-producing community in ammonium-rich engineered AD processes, genomic features conferring ammonium resistance, bacterial defense, oxygen and temperature tolerance were found, as well as attributes related to biofilm formation and flocculation. It is likely that T. acetatoxydans can form an electrochemical gradient by putative electron-bifurcating Rnf complex and [Fe-Fe] hydrogenases, as observed in other acetogens. However, genomic deficiencies related to acetogenic metabolism and anaerobic respiration were discovered, such as the lack of formate dehydrogenase and F1F0 ATP synthase. This has potential consequences for the metabolic pathways used under SAO and non-SAO conditions. The two complete sets of bacteriophage genomes, which were found to be encoded in the genome, are also worthy of mention. PMID:25811859

  19. Positron scattering from vinyl acetate

    NASA Astrophysics Data System (ADS)

    Chiari, L.; Zecca, A.; Blanco, F.; García, G.; Brunger, M. J.

    2014-09-01

    Using a Beer-Lambert attenuation approach, we report measured total cross sections (TCSs) for positron scattering from vinyl acetate (C4H6O2) in the incident positron energy range 0.15-50 eV. In addition, we also report an independent atom model with screening corrected additivity rule computation results for the TCSs, differential and integral elastic cross sections, the positronium formation cross section and inelastic integral cross sections. The energy range of these calculations is 1-1000 eV. While there is a reasonable qualitative correspondence between measurement and calculation for the TCSs, in terms of the energy dependence of those cross sections, the theory was found to be a factor of ˜2 larger in magnitude at the lower energies, even after the measured data were corrected for the forward angle scattering effect.

  20. Extractive fermentation of acetic acid

    SciTech Connect

    Busche, R.M.

    1991-12-31

    In this technoeconomic evaluation of the manufacture of acetic acid by fermentation, the use of the bacterium: Acetobacter suboxydans from the old vinegar process was compared with expected performance of the newer Clostridium thermoaceticum bacterium. Both systems were projected to operate as immobilized cells in a continuous, fluidized bed bioreactor, using solvent extraction to recover the product. Acetobacter metabolizes ethanol aerobically to produce acid at 100 g/L in a low pH medium. This ensures that the product is in the form of a concentrated extractable free acid, rather than as an unextractable salt. Unfortunately, yields from glucose by way of the ethanol fermentation are poor, but near the biological limits of the organisms involved. Conversely, C. thermoaceticum is a thermophilic anaerobe that operates at high fermentation rates on glucose at neutral pH to produce acetate salts directly in substantially quantitative yields. However, it is severely inhibited by product, which restricts concentration to a dilute 20 g/L. An improved Acetobacter system operating with recycled cells at 50 g/L appears capable of producing acid at $0.38/lb, as compared with a $0.29/lb price for synthetic acid. However, this system has only a limited margin for process improvement. The present Clostridium system cannot compete, since the required selling price would be $0.42/lb. However, if the organism could be adapted to tolerate higher product concentrations at acid pH, selling price could be reduced to $0.22/lb, or about 80% of the price of synthetic acid.

  1. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.380 Melengestrol acetate. A tolerance of 25 parts...

  2. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.380 Melengestrol acetate. A tolerance of 25 parts...

  3. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.380 Melengestrol acetate. A tolerance of 25 parts...

  4. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Tolerances for Residues of New Animal Drugs § 556.380 Melengestrol acetate. A tolerance of 25 parts...

  5. Manufacturing Ethyl Acetate From Fermentation Ethanol

    NASA Technical Reports Server (NTRS)

    Rohatgi, Naresh K.; Ingham, John D.

    1991-01-01

    Conceptual process uses dilute product of fermentation instead of concentrated ethanol. Low-concentration ethanol, extracted by vacuum from fermentation tank, and acetic acid constitutes feedstock for catalytic reaction. Product of reaction goes through steps that increases ethyl acetate content to 93 percent by weight. To conserve energy, heat exchangers recycle waste heat to preheat process streams at various points.

  6. 21 CFR 173.228 - Ethyl acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the specifications of the Food Chemicals Codex, 1 (Ethyl Acetate; p. 372, 3d Ed., 1981), which are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ethyl acetate. 173.228 Section 173.228 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  7. Review: Mechanisms of ammonium toxicity and the quest for tolerance.

    PubMed

    Esteban, Raquel; Ariz, Idoia; Cruz, Cristina; Moran, Jose Fernando

    2016-07-01

    Ammonium sensitivity of plants is a worldwide problem, constraining crop production. Prolonged application of ammonium as the sole nitrogen source may result in physiological and morphological disorders that lead to decreased plant growth and toxicity. The main causes of ammonium toxicity/tolerance described until now include high ammonium assimilation by plants and/or low sensitivity to external pH acidification. The various ammonium transport-related components, especially the non-electrogenic influx of NH3 (related to the depletion of (15)N) and the electrogenic influx of NH4(+), may contribute to ammonium accumulation, and therefore to NH3 toxicity. However, this accumulation may be influenced by increasing K(+) concentration in the root medium. Recently, new insights have been provided by "omics" studies, leading to a suggested involvement of GDP mannose-pyrophosphorylase in the response pathways of NH4(+) stress. In this review, we highlight the cross-talk signaling between nitrate, auxins and NO, and the importance of the connection of the plants' urea cycle to metabolism of polyamines. Overall, the tolerance and amelioration of ammonium toxicity are outlined to improve the yield of ammonium-grown plants. This review identifies future directions of research, focusing on the putative importance of aquaporins in ammonium influx, and on genes involved in ammonium sensitivity and tolerance. PMID:27181951

  8. Immunohistochemical observation of indole-3-acetic acid at the IAA synthetic maize coleoptile tips

    PubMed Central

    Nishimura, Takeshi; Toyooka, Kiminori; Sato, Mayuko; Matsumoto, Sachiko; Lucas, M. Mercedes; Strnad, Miroslav; Baluška, František; Koshiba, Tomokazu

    2011-01-01

    To investigate the distribution of IAA (indole-3-acetic acid) and the IAA synthetic cells in maize coleoptiles, we established immunohistochemistry of IAA using an anti-IAA-C-monoclonal antibody. We first confirmed the specificity of the antibody by comparing the amounts of endogenous free and conjugated IAA to the IAA signal obtained from the IAA antibody. Depletion of endogenous IAA showed a corresponding decrease in immuno-signal intensity and negligible cross-reactivity against IAA-related compounds, including tryptophan, indole-3-acetamide, and conjugated-IAA was observed. Immunolocalization showed that the IAA signal was intense in the approximately 1 mm region and the outer epidermis at the approximately 0.5 mm region from the top of coleoptiles treated with 1-N-naphthylphthalamic acid. By contrast, the IAA immuno-signal in the outer epidermis almost disappeared after 5-methyl-tryptophan treatment. Immunogold labeling of IAA with an anti-IAA-N-polyclonal antibody in the outer-epidermal cells showed cytoplasmic localization of free-IAA, but none in cell walls or vacuoles. These findings indicated that IAA is synthesized in the 0–2.0 mm region of maize coleoptile tips from Trp, in which the outer-epidermal cells of the 0.5 mm tip are the most active IAA synthetic cells. PMID:22112455

  9. Effective immobilisation of a metathesis catalyst bearing an ammonium-tagged NHC ligand on various solid supports.

    PubMed

    Skowerski, Krzysztof; Białecki, Jacek; Czarnocki, Stefan J; Żukowska, Karolina; Grela, Karol

    2016-01-01

    An ammonium-tagged ruthenium complex, 8, was deposited on several widely available commercial solid materials such as silica gel, alumina, cotton, filter paper, iron powder or palladium on carbon. The resulting catalysts were tested in toluene or ethyl acetate, and found to afford metathesis products in high yield and with extremely low ruthenium contamination. Depending on the support used, immobilised catalyst 8 shows also additional traits, such as the possibility of being magnetically separated or the use for metathesis and subsequent reduction of the obtained double bond in one pot. PMID:26877803

  10. Effective immobilisation of a metathesis catalyst bearing an ammonium-tagged NHC ligand on various solid supports

    PubMed Central

    Białecki, Jacek; Czarnocki, Stefan J; Żukowska, Karolina

    2016-01-01

    Summary An ammonium-tagged ruthenium complex, 8, was deposited on several widely available commercial solid materials such as silica gel, alumina, cotton, filter paper, iron powder or palladium on carbon. The resulting catalysts were tested in toluene or ethyl acetate, and found to afford metathesis products in high yield and with extremely low ruthenium contamination. Depending on the support used, immobilised catalyst 8 shows also additional traits, such as the possibility of being magnetically separated or the use for metathesis and subsequent reduction of the obtained double bond in one pot. PMID:26877803

  11. The comparative effects of feeding ammonium carbonate, ammonium sulfate, and ammonium chloride on urinary calcium excretion in the rat.

    PubMed

    Whiting, S J; Cole, D E

    1987-11-01

    When either sulfate or chloride is added to the diet, the resulting acid load causes a rise in urinary calcium excretion. There is, however, the possibility that sulfate, which has been shown to complex renal tubular calcium, will further decrease renal calcium reabsorption and thus produce a greater calciuria than chloride. Because addition of a fixed cation (e.g., sodium) to the diet may also stimulate calciuresis, experiments were conducted using metabolizable ammonium to minimize cation effects. Ammonium salts of sulfate, chloride, and carbonate (control) were added to the diets of male rats at 0.3 mequiv./g weight of diet. Twenty-four hour excretion rates of calcium, sulfate, chloride, and net acid were measured at various intervals up to 1 month. As expected, the chloride and sulfate diets were both associated with significantly elevated urine calcium and net acid excretion as compared with controls. However, those fed sulfate exhibited significantly less calcium and acid excretion and absorbed a smaller proportion of the anion load than those given chloride. In a second experiment, the amounts of supplemental sulfate and chloride were adjusted so that total absorptions were similar. At 2 weeks, both calcium and acid excretions in the fixed anion groups were no longer significantly different. Thus, in chronic feeding trials, there appears to be no measurable difference in the calciuretic properties of sulfate and chloride anions. PMID:3449184

  12. [Achievement of Sulfate-Reducing Anaerobic Ammonium Oxidation Reactor Started with Nitrate-Reducting Anaerobic Ammonium Oxidation].

    PubMed

    Liu, Zheng-chuan; Yuan, Lin-jiang; Zhou, Guo-biao; Li, Jing

    2015-09-01

    The transformation of nitrite-reducing anaerobic ammonium oxidation to sulfate-reducing anaerobic ammonium oxidation in an UASB was performed and the changes in microbial community were studied. The result showed that the sulfate reducing anaerobic ammonium oxidation process was successfully accomplished after 177 days' operation. The removal rate of ammonium nitrogen and sulfate were up to 58. 9% and 15. 7%, the removing load of ammonium nitrogen and sulfate were 74. 3 mg.(L.d)-1 and 77. 5 mg.(L.d)-1 while concentration of ammonium nitrogen and sulfate of influent were 130 mg.(L.d)-1 and 500 mg.(L.d)-1, respectively. The lost nitrogen and sulphur was around 2 in molar ratio. The pH value of the effluent was lower than that of the influent. Instead of Candidatus brocadia in nitrite reducing anaerobic ammonium oxidation granular sludge, Bacillus benzoevorans became the dominant species in sulfate reducing anaerobic ammonium oxidation sludge. The dominant bacterium in the two kinds of anaerobic ammonium oxidation process is different. Our results imply that the two anaerobic ammonium oxidation processes are carried out by different kind of bacterium. PMID:26717697

  13. Ammonium release from a blanket peatland into headwater stream systems.

    PubMed

    Daniels, S M; Evans, M G; Agnew, C T; Allott, T E H

    2012-04-01

    Hydrochemical sampling of South Pennine (UK) headwater streams draining eroded upland peatlands demonstrates these systems are nitrogen saturated, with significant leaching of dissolved inorganic nitrogen (DIN), particularly ammonium, during both stormflow and baseflow conditions. DIN leaching at sub-catchment scale is controlled by geomorphological context; in catchments with low gully densities ammonium leaching dominates whereas highly gullied catchments leach ammonium and nitrate since lower water tables and increased aeration encourages nitrification. Stormflow flux calculations indicate that: approximately equivalent amounts of nitrate are deposited and exported; ammonium export significantly exceeds atmospheric inputs. This suggests two ammonium sources: high atmospheric loadings; and mineralisation of organic nitrogen stored in peat. Downstream trends indicate rapid transformation of leached ammonium into nitrate. It is important that low-order headwater streams are adequately considered when assessing impacts of atmospheric loads on the hydrochemistry of stream networks, especially with respect to erosion, climate change and reduced precipitation. PMID:22285801

  14. Mild ammonium stress increases chlorophyll content in Arabidopsis thaliana

    PubMed Central

    Sanchez-Zabala, Joseba; González-Murua, Carmen; Marino, Daniel

    2015-01-01

    Nitrate (NO3−) and ammonium (NH4+) are the main forms of nitrogen available in the soil for plants. Excessive NH4+ accumulation in tissues is toxic for plants and exclusive NH4+-based nutrition enhances this effect. Ammonium toxicity syndrome commonly includes growth impairment, ion imbalance and chlorosis among others. In this work, we observed high intraspecific variability in chlorophyll content in 47 Arabidopsis thaliana natural accessions grown under 1 mM NH4+ or 1 mM NO3− as N-source. Interestingly, chlorophyll content increased in every accession upon ammonium nutrition. Moreover, this increase was independent of ammonium tolerance capacity. Thus, chlorosis seems to be an exclusive effect of severe ammonium toxicity while mild ammonium stress induces chlorophyll accumulation. PMID:25853545

  15. Impact of non-storing biomass on PHA production: an enrichment culture on acetate and methanol.

    PubMed

    Marang, Leonie; Jiang, Yang; van Loosdrecht, Mark C M; Kleerebezem, Robbert

    2014-11-01

    The use of enrichment cultures for polyhydroxyalkanoate (PHA) production from substrate mixtures such as wastewater inevitably results in the establishment of a non-PHA-storing population besides the PHA-producing bacteria. This reduces the maximum PHA content that can be established, and increases downstream-processing costs. The aim of this study was to investigate the impact of non-storing biomass on the PHA production process. A microbial culture was enriched in a sequencing batch reactor fed with acetate and methanol. Methanol served as model substrate for compounds unsuitable for PHA production. The enrichment was dominated by Plasticicumulans acidivorans, a known PHA producer, and Methylobacillus flagellatus, an obligate methylotroph that cannot store PHA. As expected, the presence of the non-storing population lowered the maximum PHA content of the culture, from more than 80 to 66wt.%. To mimic a nitrogen-rich waste stream, additional accumulation experiments were performed with continuous supply of carbon and ammonium. In these experiments P. acidivorans still accumulated large amounts of PHA, but unrestricted growth of the non-storing, methylotrophic population reduced the maximum overall PHA content to 52wt.%. Besides ammonium limitation, other strategies to restrict the fraction of non-storing biomass should be developed. The mixture of acetate and methanol is a useful model substrate for the development of such strategies. PMID:24802855

  16. Utilization of by-product ammonium sulfate

    SciTech Connect

    Boles, J.L.

    1992-12-31

    Sulfur is generally referred to as a secondary plant nutrients but it actually ranks in importance with nitrogen and phosphorous in protein synthesis. It is also an integral part of vitamins and enzymes essential to life. Soils in many areas of the world today are deficient in sulfur and soil sulfur reserves are being rapidly depleted. To address growing agronomic needs for sulfur, TVA`s National Fertilizer and Environmental Research Center (NFERC) has been committed to development of technologies to produce low-cost sulfur-containing fertilizers since the mid 1970`s. In the late 1970`s and early 1980`s, NFERC developed and demonstrated a 29-0-0-5S urea-ammonium sulfate (UAS) suspension. In 1984, NFERC developed and later patented a new family of nitrogen-sulfur (NS) suspensions to replace the earlier UAS suspension with more versatile, better quality products made by a simpler, more economical process. NFERC`s current endeavors involve development of technologies for successful utilization of low-quality, by-product ammonium sulfate (AS) in the fertilizer industry, which is the subject of this paper. NFERC`s current focus on utilization of by-product AS centers around the economic and environmental aspects of these technologies as the primary rationale for development, since the needs for sulfur in soils is now generally well known and sulfur application is common and now charged for in many areas.

  17. Utilization of by-product ammonium sulfate

    SciTech Connect

    Boles, J.L.

    1992-01-01

    Sulfur is generally referred to as a secondary plant nutrients but it actually ranks in importance with nitrogen and phosphorous in protein synthesis. It is also an integral part of vitamins and enzymes essential to life. Soils in many areas of the world today are deficient in sulfur and soil sulfur reserves are being rapidly depleted. To address growing agronomic needs for sulfur, TVA's National Fertilizer and Environmental Research Center (NFERC) has been committed to development of technologies to produce low-cost sulfur-containing fertilizers since the mid 1970's. In the late 1970's and early 1980's, NFERC developed and demonstrated a 29-0-0-5S urea-ammonium sulfate (UAS) suspension. In 1984, NFERC developed and later patented a new family of nitrogen-sulfur (NS) suspensions to replace the earlier UAS suspension with more versatile, better quality products made by a simpler, more economical process. NFERC's current endeavors involve development of technologies for successful utilization of low-quality, by-product ammonium sulfate (AS) in the fertilizer industry, which is the subject of this paper. NFERC's current focus on utilization of by-product AS centers around the economic and environmental aspects of these technologies as the primary rationale for development, since the needs for sulfur in soils is now generally well known and sulfur application is common and now charged for in many areas.

  18. Reassimilation of ammonium in Lotus japonicus.

    PubMed

    Betti, Marco; García-Calderón, Margarita; Pérez-Delgado, Carmen M; Credali, Alfredo; Pal'ove-Balang, Peter; Estivill, Guillermo; Repčák, Miroslav; Vega, José M; Galván, Francisco; Márquez, Antonio J

    2014-10-01

    This review summarizes the most recent results obtained in the analysis of two important metabolic pathways involved in the release of internal sources of ammonium in the model legume Lotus japonicus: photorespiratory metabolism and asparagine breakdown mediated by aparaginase (NSE). The use of photorespiratory mutants deficient in plastidic glutamine synthetase (GS2) enabled us to investigate the transcriptomics and metabolomic changes associated with photorespiratory ammonium accumulation in this plant. The results obtained indicate the existence of a coordinate regulation of genes involved in photorespiratory metabolism. Other types of evidence illustrate the multiple interconnections existing among the photorespiratory pathway and other processes such as intermediate metabolism, nodule function, and secondary metabolism in this plant, all of which are substantially affected in GS2-deficient mutants because of the impairment of the photorespiratory cycle. Finally, the importance of asparagine metabolism in L. japonicus is highlighted because of the fact that asparagine constitutes the vast majority of the reduced nitrogen translocated between different organs of this plant. The different types of NSE enzymes and genes which are present in L. japonicus are described. There is a particular focus on the most abundant K(+)-dependent LjNSE1 isoform and how TILLING mutants were used to demonstrate by reverse genetics the importance of this particular isoform in plant growth and seed production. PMID:24948681

  19. Safety Testing of Ammonium Nitrate Based Mixtures

    NASA Astrophysics Data System (ADS)

    Phillips, Jason; Lappo, Karmen; Phelan, James; Peterson, Nathan; Gilbert, Don

    2013-06-01

    Ammonium nitrate (AN)/ammonium nitrate based explosives have a lengthy documented history of use by adversaries in acts of terror. While historical research has been conducted on AN-based explosive mixtures, it has primarily focused on detonation performance while varying the oxygen balance between the oxidizer and fuel components. Similarly, historical safety data on these materials is often lacking in pertinent details such as specific fuel type, particle size parameters, oxidizer form, etc. A variety of AN-based fuel-oxidizer mixtures were tested for small-scale sensitivity in preparation for large-scale testing. Current efforts focus on maintaining a zero oxygen-balance (a stoichiometric ratio for active chemical participants) while varying factors such as charge geometry, oxidizer form, particle size, and inert diluent ratios. Small-scale safety testing was conducted on various mixtures and fuels. It was found that ESD sensitivity is significantly affected by particle size, while this is less so for impact and friction. Thermal testing is in progress to evaluate hazards that may be experienced during large-scale testing.

  20. Molecular mechanism of anaerobic ammonium oxidation.

    PubMed

    Kartal, Boran; Maalcke, Wouter J; de Almeida, Naomi M; Cirpus, Irina; Gloerich, Jolein; Geerts, Wim; Op den Camp, Huub J M; Harhangi, Harry R; Janssen-Megens, Eva M; Francoijs, Kees-Jan; Stunnenberg, Hendrik G; Keltjens, Jan T; Jetten, Mike S M; Strous, Marc

    2011-11-01

    Two distinct microbial processes, denitrification and anaerobic ammonium oxidation (anammox), are responsible for the release of fixed nitrogen as dinitrogen gas (N(2)) to the atmosphere. Denitrification has been studied for over 100 years and its intermediates and enzymes are well known. Even though anammox is a key biogeochemical process of equal importance, its molecular mechanism is unknown, but it was proposed to proceed through hydrazine (N(2)H(4)). Here we show that N(2)H(4) is produced from the anammox substrates ammonium and nitrite and that nitric oxide (NO) is the direct precursor of N(2)H(4). We resolved the genes and proteins central to anammox metabolism and purified the key enzymes that catalyse N(2)H(4) synthesis and its oxidation to N(2). These results present a new biochemical reaction forging an N-N bond and fill a lacuna in our understanding of the biochemical synthesis of the N(2) in the atmosphere. Furthermore, they reinforce the role of nitric oxide in the evolution of the nitrogen cycle. PMID:21964329

  1. Interaction of heavy metal ions with ammonium humates

    SciTech Connect

    Budaeva, A.D.; Zoltoev, E.V.; Tikhova, V.D.; Bodoev, N.V.

    2006-06-15

    Sorption properties of ammonium humates with respect to Fe(III), Cu(II), Al(III), Ni(II), Pb(II), and Zn(II) are studied. The effect of the metal ion concentration on the ammonium humate consumption is examined and the corresponding dependences are analyzed using regression equations. The IR spectra of brown coal humic acids, ammonium humates, as well as Fe, Cu, Ni, Zn, Pb, and Al humates are presented.

  2. Ammonium dichromate poisoning: A rare cause of acute kidney injury

    PubMed Central

    Radhakrishnan, H.; Gopi, M.; Arumugam, A.

    2014-01-01

    Ammonium dichromate is an inorganic compound frequently used in screen and color printing. Being a strong oxidizing agent, it causes oxygen free radical injury resulting in organ failure. We report a 25-year-old female who presented with acute kidney injury after consumption of ammonium dichromate. She was managed successfully with hemodialysis and supportive measures. This case is reported to highlight the toxicity of ammonium dichromate. PMID:25484533

  3. Evidence for ammonium-bearing minerals in Ceres

    NASA Technical Reports Server (NTRS)

    King, T. V. V.; Clark, R. N.; Calvin, W. M.; Sherman, D. M.; Swayze, G. A.; Brown, R. H.

    1991-01-01

    Evidence for ammonium-bearing minerals was found on the surface of the largest asteroid Ceres. The presence of ammonium-bearing clays suggests that Ceres has experienced a period of alteration by substantial amounts of an ammonium-bearing fluid. The presence of the ammonium-bearing clays does not preclude Ceres maintaining a volatile inventory in the core or in a volatile-rich zone at some distance below the surface. Telescopic observations of Ceres, using the 3.0 meter NASA Infrared telescope facility prompted this reevaluation of its surface mineralogy.

  4. The pharmacology of nomegestrol acetate.

    PubMed

    Ruan, Xiangyan; Seeger, Harald; Mueck, Alfred O

    2012-04-01

    Nomegestrol acetate (NOMAC) is a 19-norprogesterone derivative with high biological activity at the progesterone receptor, a weak anti-androgenic effect, but with no binding to estrogen, glucocorticoid or mineralocorticoid receptors. At dosages of 1.5mg/day or more, NOMAC effectively suppresses gonadotropic activity and ovulation in women of reproductive age. Hemostasis, lipids and carbohydrate metabolism remain largely unchanged. In normal and cancerous human breast cells, NOMAC has shown favorable effects on estrogen metabolism. Like natural progesterone (but in contrast to some other synthetic progestogens), it does not appear stimulate the proliferation of cancerous breast cells. While there has been some experience of the use of NOMAC in combination with estrogens as a hormone replacement therapy, most of the data on the compound are reported in the context of its inclusion as a component of a new contraceptive pill comprising 2.5mg NOMAC combined with 1.5mg estradiol. Because of its strong endometrial efficacy, and due to its high antigonadotropic activity and long elimination half-life (about 50h), the contraceptive efficacy of the new pill is maintained even when dosages are missed. Furthermore, for the first time with a monophasic 24/4 regimen containing estradiol, cyclical stability can be achieved comparable with that obtained using pills containing ethinyl estradiol and progestogens like levonorgestrel or drospirenone. The addition of NOMAC to estradiol means that the beneficial effects of estrogen are not lost, which is of especial importance in relation to the cardiovascular system. On the basis both of its pharmacology and of studies performed during the development of the NOMAC/estradiol pill, involving some 4000 women in total, good long-term tolerability can be expected for NOMAC, although its safety profile is still to be fully ascertained, as the clinical endpoint studies are yet to be completed. PMID:22364709

  5. Conversion to eslicarbazepine acetate monotherapy

    PubMed Central

    French, Jacqueline; Jacobson, Mercedes P.; Pazdera, Ladislav; Gough, Mallory; Cheng, Hailong; Grinnell, Todd; Blum, David

    2016-01-01

    Objective: To assess the efficacy and safety of eslicarbazepine acetate (ESL) monotherapy. Methods: This post hoc pooled analysis of 2 randomized double-blind studies (093-045 and -046) included adults with partial-onset seizures medically uncontrolled by 1 or 2 antiepileptic drugs (AEDs). Following the baseline period (8 weeks), eligible patients were randomized 2:1 to receive ESL 1,600 mg or 1,200 mg once daily for 18 weeks; the primary endpoint was study exit by meeting predefined exit criteria (signifying worsening seizure control). In each study, treatment was considered effective if the upper 95% confidence limit for exit rate was lower than the historical control threshold (65.3%). Results: Pooled exit rates were as follows: ESL 1,600 mg = 20.6% (95% confidence interval: 15.6%–26.8%); ESL 1,200 mg = 30.8% (23.0%–40.5%). Use of 2 baseline AEDs or rescue medication, US location, epilepsy duration ≥20 years, and higher maximum baseline seizure frequency were associated with higher exit risks. Median percent reductions in standardized seizure frequency between baseline and the 18-week double-blind period were as follows: ESL 1,600 mg = 43.2%; ESL 1,200 mg = 35.7%; baseline carbamazepine use was associated with smaller reductions. Safety profiles were similar between ESL doses. Conclusions: Exit rates for ESL monotherapy (1,600 mg and 1,200 mg once daily) were lower than the historical control threshold, irrespective of baseline AED use and region, with no additional safety concerns identified. Clinical factors and location clearly influence treatment responses in conversion-to-monotherapy trials. Classification of evidence: This pooled analysis provides Class IV evidence that for adults with medically uncontrolled partial-onset seizures, ESL monotherapy is well tolerated and effective. PMID:26911639

  6. Mixtures of the 1-ethyl-3-methylimidazolium acetate ionic liquid with different inorganic salts: insights into their interactions.

    PubMed

    Oliveira, Filipe S; Cabrita, Eurico J; Todorovic, Smilja; Bernardes, Carlos E S; Lopes, José N Canongia; Hodgson, Jennifer L; MacFarlane, Douglas R; Rebelo, Luís P N; Marrucho, Isabel M

    2016-01-28

    In this work, we explore the interactions between the ionic liquid 1-ethyl-3-methylimidazolim acetate and different inorganic salts belonging to two different cation families, those based on ammonium and others based on sodium. NMR and Raman spectroscopy are used to screen for changes in the molecular environment of the ions in the ionic liquid + inorganic salt mixtures as compared to pure ionic liquid. The ion self-diffusion coefficients are determined from NMR data, allowing the discussion of the ionicity values of the ionic liquid + inorganic salt mixtures calculated using different methods. Our data reveal that preferential interactions are established between the ionic liquid and ammonium-based salts, as opposed to sodium-based salts. Computational calculations show the formation of aggregates between the ionic liquid and the inorganic salt, which is consistent with the spectroscopic data, and indicate that the acetate anion of the ionic liquid establishes preferential interactions with the ammonium cation of the inorganic salts, leaving the imidazolium cation less engaged in the media. PMID:26725329

  7. Clostridium thermosaccharolyticum strain deficient in acetate production

    SciTech Connect

    Rothstein, D.M.

    1986-01-01

    A mutant of Clostridium thermosaccharolyticum that is blocked in acetate production was isolated after treatment with nitrosoguanidine and selection for fluoroacetate resistance. The mutant produced more ethanol than the parent strain did.

  8. Acetate Causes Alcohol Hangover Headache in Rats

    PubMed Central

    Maxwell, Christina R.; Spangenberg, Rebecca Jay; Hoek, Jan B.; Silberstein, Stephen D.; Oshinsky, Michael L.

    2010-01-01

    Background The mechanism of veisalgia cephalgia or hangover headache is unknown. Despite a lack of mechanistic studies, there are a number of theories positing congeners, dehydration, or the ethanol metabolite acetaldehyde as causes of hangover headache. Methods We used a chronic headache model to examine how pure ethanol produces increased sensitivity for nociceptive behaviors in normally hydrated rats. Results Ethanol initially decreased sensitivity to mechanical stimuli on the face (analgesia), followed 4 to 6 hours later by inflammatory pain. Inhibiting alcohol dehydrogenase extended the analgesia whereas inhibiting aldehyde dehydrogenase decreased analgesia. Neither treatment had nociceptive effects. Direct administration of acetate increased nociceptive behaviors suggesting that acetate, not acetaldehyde, accumulation results in hangover-like hypersensitivity in our model. Since adenosine accumulation is a result of acetate formation, we administered an adenosine antagonist that blocked hypersensitivity. Discussion Our study shows that acetate contributes to hangover headache. These findings provide insight into the mechanism of hangover headache and the mechanism of headache induction. PMID:21209842

  9. Mafenide acetate allergy presenting as recurrent chondritis.

    PubMed

    Pickus, Evan J; Lionelli, Gerald T; Charles, E Woodall; Korentager, Richard A

    2002-02-01

    Acute chondritis has a strong predilection for recurrence. Mafenide acetate has been implicated in causing reactions that mimic this condition; however, these hypersensitivity reactions lack fever, fluctuance, and pain. The authors report a case of mafenide acetate allergy presenting as recurrent chondritis in a patient who had previously been treated successfully for this condition. In this patient, the allergic response resolved within 3 days after cessation of mafenide acetate. If unappreciated, it may have led to unnecessary operative intervention. Therefore, auricular edema and erythema, without fever, fluctuance, and pain, must be recognized by surgeons as a possible mafenide acetate allergy and must be considered in the differential diagnosis for patients who present with recurrent acute suppurative chondritis. PMID:11910229

  10. [A case of ammonium urate urinary stone].

    PubMed

    Hara, Noboru; Koike, Hiroshi

    2004-05-01

    An 18-year-old female, who had undergone antireflux surgery for bilateral vesicoureteral reflux 5 years ago, was admitted to our department with complaints of fever and left-sided back pain. Bilateral renal stones and pyelonephritis were diagnosed after roentgenography, ultrasonography and urinalysis. Pyelonephritis was successfully treated with antibiotics and the left renal stone was completely disintegrated with extracorporeal shock wave lithotripsy. Spectrophotometric analysis revealed that the stone was composed of pure ammonium urate (AU). The patient had not experienced any episodes of urinary tract infection from the antireflux surgery until the present event, but had lost 20 kg in body weight during the last year due to a low-caloric diet and laxative abuse. AU urinary stones have been infrequently reported in Japan, and they are supposed to be associated with a low-caloric diet, laxative abuse, and anorexia nervosa. PMID:15237492

  11. Unsteady growth of ammonium chloride dendrites

    NASA Astrophysics Data System (ADS)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.

    2016-02-01

    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=сΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  12. Shock Compression of Ammonium Perchlorate Single Crystals

    NASA Astrophysics Data System (ADS)

    Gupta, Y. M.; Yuan, Gang; Feng, Ruqiang

    1997-07-01

    The shock response of ammonium perchlorate (AP) single crystals has been examined for uniaxial strain compression along the [210] and [001] directions. Quartz gauge and VISAR measurements have provided the wave profiles at the impact surface and after propagation through thin samples (1-3 mm thickness) for peak stresses ranging between 10 and 65 kbar. A two wave structure due to elastic-plastic deformation was observed for both orientations. The measured HEL values for the [210] and [001] orientations were about 4.3 and 3.5 kbar, respectively. Data for the two orientations reveal small stress relaxation effects and small differences due to crystal orientation effects. We have chosen to fit both sets of results with a simple elastic-perfectly plastic model used for isotropic materials. Reasonable agreement between the calculations and experimental results was obtained. Over the stress range examined to date, no evidence of chemical decomposition was observed for the time durations in our experiments.

  13. Allyl­ammonium hydrogen oxalate hemihydrate

    PubMed Central

    Dziuk, Błażej; Zarychta, Bartosz; Ejsmont, Krzysztof

    2014-01-01

    In the title hydrated mol­ecular salt, C3H8N+·C2HO4 −·0.5H2O, the water O atom lies on a crystallographic twofold axis. The C=C—C—N torsion angle in the cation is 2.8 (3)° and the dihedral angle between the CO2 and CO2H planes in the anion is 1.0 (4)°. In the crystal, the hydrogen oxalate ions are linked by O—H⋯O hydrogen bonds, generating [010] chains. The allyl­ammonium cations bond to the chains through N—H⋯O and N—H⋯(O,O) hydrogen bonds. The water mol­ecule accepts two N—H⋯O hydrogen bonds and makes two O—H⋯O hydrogen bonds. Together, the hydrogen bonds generate (100) sheets. PMID:25249903

  14. Nomegestrol acetate/estradiol: in oral contraception.

    PubMed

    Yang, Lily P H; Plosker, Greg L

    2012-10-01

    Nomegestrol acetate/estradiol is a combined oral contraceptive with approval in many countries. This fixed-dose combination tablet contains nomegestrol acetate, a highly selective progestogen, and estradiol, a natural estrogen. It is the first monophasic combined oral contraceptive to contain estradiol, and is taken in 28-day cycles, consisting of 24 active therapy days with 4 placebo days (i.e. 24/4-day cycles). In two large, 1-year, randomized, open-label, multicentre, phase III trials in healthy adult women (aged 18-50 years), nomegestrol acetate/estradiol was at least as effective as drospirenone/ethinylestradiol as contraceptive therapy, as the pregnancy rates in women aged 18-35 years (primary efficacy population) in terms of the Pearl Index (primary endpoint) were numerically lower with nomegestrol acetate/estradiol, although the between-group difference was not statistically significant. In both trials, nomegestrol acetate/estradiol was given in a 24/4-day cycle, and drospirenone/ethinylestradiol was given in a 21/7-day cycle. The criteria for using condoms in case of forgotten doses were less stringent in the nomegestrol acetate/estradiol group than in the drospirenone/ethinylestradiol group. Nomegestrol acetate/estradiol therapy for up to 1 year was generally well tolerated in healthy adult women, with an acceptable tolerability profile in line with that expected for a combined oral contraceptive. The most commonly reported adverse events were acne and abnormal withdrawal bleeding (most often shorter, lighter or absent periods). Overall, compared with drospirenone/ethinylestradiol, nomegestrol acetate/estradiol appeared to be associated with less favourable acne-related outcomes, and shorter, lighter or absent periods. PMID:22950535

  15. Methanogenesis from acetate: a nonmethanogenic bacterium from an anaerobic acetate enrichment.

    PubMed

    Ward, D M; Mah, R A; Kaplan, I R

    1978-06-01

    A methanogenic acetate enrichment was initiated by inoculation of an acetate-mineral salts medium with domestic anaerobic digestor sludge and maintained by weekly transfer for 2 years. The enrichment culture contained a Methanosarcina and several obligately anaerobic nonmethanogenic bacteria. These latter organisms formed varying degrees of association with the Methanosarcina, ranging from the nutritionally fastidious gram-negative rod called the satellite bacterium to the nutritionally nonfastidious Eubacterium limosum. The satellite bacterium had growth requirements for amino acids, a peptide, a purine base, vitamin B12, and other B vitamins. Glucose, mannitol, starch, pyruvate, cysteine, lysine, leucine, isoleucine, arginine, and asparagine stimulated growth and hydrogen production. Acetate was neither incorporated nor metabolized by the satellite organism. Since acetate was the sole organic carbon source in the enrichment culture, organism(s) which metabolize acetate (such as the Methanosarcina) must produce substrates and growth factors for associated organisms which do not metabolize acetate. PMID:677881

  16. THE MASS ACCOMMODATION COEFFICIENT OF AMMONIUM NITRATE AEROSOL. (R823514)

    EPA Science Inventory

    The mass transfer rate of pure ammonium nitrate between the aerosol and gas phases was
    quantified experimentally by the use of the tandem differential mobility analyzer/scanning mobility
    particle sizer (TDMA/SMPS) technique. Ammonium nitrate particles 80-220 nm in diameter<...

  17. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  18. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  19. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  20. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  1. 40 CFR 721.655 - Ethoxylated alkyl quaternary ammonium compound.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... compound. 721.655 Section 721.655 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.655 Ethoxylated alkyl quaternary ammonium compound. (a) Chemical... as an ethoxylated alkyl quaternary ammonium compound (PMN P-96-573) is subject to reporting...

  2. 40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Glufosinate ammonium; tolerances for residues. 180.473 Section 180.473 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.473 Glufosinate ammonium;...

  3. 21 CFR 73.1025 - Ferric ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1025 Ferric ammonium citrate. (a) Identity. The... green forms, are deliquescent in air, and are reducible by light. (b) Specifications. Ferric ammonium... from certification. Certification of this color additive is not necessary for the protection of...

  4. 21 CFR 73.1025 - Ferric ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1025 Ferric ammonium citrate. (a) Identity. The... green forms, are deliquescent in air, and are reducible by light. (b) Specifications. Ferric ammonium... from certification. Certification of this color additive is not necessary for the protection of...

  5. 21 CFR 73.1025 - Ferric ammonium citrate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1025 Ferric ammonium citrate. (a) Identity. The... green forms, are deliquescent in air, and are reducible by light. (b) Specifications. Ferric ammonium... from certification. Certification of this color additive is not necessary for the protection of...

  6. Racer (Ammonium Nonanoate) weed control evaluation for onions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Racer has been labeled as a herbicide for food use and is currently under consideration as an organic herbicide for organically grown food crops. The main component (40%) of Racer is ammonium nonanoate (ammonium pelargonate), which occurs in nature and primarily formed from biodegradation of higher...

  7. 46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and transportation of uniform, nonsegregating mixtures of nitrogen/phosphate or nitrogen/potash type fertilizers,...

  8. 46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and transportation of uniform, nonsegregating mixtures of nitrogen/phosphate or nitrogen/potash type fertilizers,...

  9. 46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and transportation of uniform, nonsegregating mixtures of nitrogen/phosphate or nitrogen/potash type fertilizers,...

  10. 46 CFR 148.220 - Ammonium nitrate-phosphate fertilizers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Ammonium nitrate-phosphate fertilizers. 148.220 Section... § 148.220 Ammonium nitrate-phosphate fertilizers. (a) This section applies to the stowage and transportation of uniform, nonsegregating mixtures of nitrogen/phosphate or nitrogen/potash type fertilizers,...

  11. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  12. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  13. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  14. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  15. 40 CFR 721.6070 - Alkyl phosphonate ammonium salts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl phosphonate ammonium salts. 721... Substances § 721.6070 Alkyl phosphonate ammonium salts. (a) Chemical substances and significant new uses... salts (PMNs P-93-725 and P-93-726) are subject to reporting under this section for the significant...

  16. IUPAC - NIST Solubility Data Series 66. Ammonium Phosphates

    NASA Astrophysics Data System (ADS)

    Eysseltová, Jitka; Dirkse, Thedford P.

    1998-11-01

    The solubility of ammonium phosphate is reviewed. Many ammonium phosphates can be described in terms of the ternary system: NH3-PO5-H2O. However, this system differs from systems like the sulfates and halates in that it has a marked tendency to form condensed oligophosphate ions. The literature survey covers the period up to 1988.

  17. Shock wave synthesis of amino acids from solutions of ammonium formate and ammonium bicarbonate

    NASA Astrophysics Data System (ADS)

    Suzuki, Chizuka; Furukawa, Yoshihiro; Kobayashi, Takamichi; Sekine, Toshimori; Nakazawa, Hiromoto; Kakegawa, Takeshi

    2015-07-01

    The emergence of life's building blocks, such as amino acids and nucleobases, on the prebiotic Earth was a critical step for the beginning of life. Reduced species with low mass, such as ammonia, amines, or carboxylic acids, are potential precursors for these building blocks of life. These precursors may have been provided to the prebiotic ocean by carbonaceous chondrites and chemical reactions related to meteorite impacts on the early Earth. The impact of extraterrestrial objects on Earth occurred more frequently during this period than at present. Such impacts generated shock waves in the ocean, which have the potential to progress chemical reactions to form the building blocks of life from reduced species. To simulate shock-induced reactions in the prebiotic ocean, we conducted shock-recovery experiments on ammonium bicarbonate solution and ammonium formate solution at impact velocities ranging from 0.51 to 0.92 km/s. In the products from the ammonium formate solution, several amino acids (glycine, alanine, ß-alanine, and sarcosine) and aliphatic amines (methylamine, ethylamine, propylamine, and butylamine) were detected, although yields were less than 0.1 mol % of the formic acid reactant. From the ammonium bicarbonate solution, smaller amounts of glycine, methylamine, ethylamine, and propylamine were formed. The impact velocities used in this study represent minimum cases because natural meteorite impacts typically have higher velocities and longer durations. Our results therefore suggest that shock waves could have been involved in forming life's building blocks in the ocean of prebiotic Earth, and potentially in aquifers of other planets, satellites, and asteroids.

  18. Hybrid organic-inorganic crystals based on ammonium dihydrogen phosphate and ammonium salicylate

    NASA Astrophysics Data System (ADS)

    Voronov, A. P.; Salo, V. I.; Puzikov, V. M.; Babenko, G. N.; Roshal, A. D.; Tkachenko, V. F.

    2011-11-01

    ADP-NH 4Sal hybrid crystals are grown from aqueous solutions. The influence of the acidity of the mixed solution on the conditions of co-crystallization of the components is studied. The spectral and scintillation characteristics are determined. Co-crystallization of ammonium salicylate (NH 4Sal) and ammonium dihydrogen phosphate (ADP, NH 4H 2PO 4) is shown to be feasible, the structure of the doping addition being defined by the solution рН. In basic and weak acidic media the hybrid crystals ADP:NH 4Sal are formed in which salicylate anions are located in the interplanar space between the {110}-type planes in the lattice of ADP. The luminescence spectra contain an emission band maximum with λ max=360 nm. In acidic solutions there are ADP:HSal crystals in which salicylic acid molecules captured by the growth macrosteps are located in the interplanar space of the prismatic {100} and pyramidal {101} growth sectors. The luminescence band undergoes bathochromic shift to λmax=400 nm. The sensitivity of ADP:NH 4Sal scintillation crystals to fast neutrons depends on the concentration of ammonium salicylate in ADP matrix. The highest neutron sensitivity is characteristic of the co-doped ADP:NH 4Sal/Tl scintillation crystals.

  19. Assimilation of ammonium and nitrate nitrogen by bean plants

    SciTech Connect

    Volk, R.J. ); Chaillou, S.; Morot-Gaudry, J.F. ); Mariotti, A. )

    1989-04-01

    Enhanced growth is often observed in plants growing on combined ammonium and nitrate nutrition. The physiological basis for such enhancement was examined by exposing non-nodulated bean (Phaseolus vulgaris L.) plants to {sup 15}N-labeled, 1.0 mM N solutions containing 0, 33, 67 or 100% of the N as ammonium, the balance being nitrate. Maximal total N uptake and biomass production were attained by plants receiving 33% ammonium. A higher proportion of incoming ammonium than nitrate was incorporated into root protein. This was accompanied by increased partitioning of plant biomass to roots. It was concluded that as a consequence of greater N metabolism in the root under mixed ammonium and nitrate nutrition, the root became a more active sink for photosynthate. Concurrently, the augmented supply of N to the shoot enhanced net photosynthesis as reflected in increased plant biomass.

  20. Ammonium Metabolism Enzymes Aid Helicobacter pylori Acid Resistance

    PubMed Central

    Miller, Erica F.

    2014-01-01

    The gastric pathogen Helicobacter pylori possesses a highly active urease to support acid tolerance. Urea hydrolysis occurs inside the cytoplasm, resulting in the production of NH3 that is immediately protonated to form NH4+. This ammonium must be metabolized or effluxed because its presence within the cell is counterproductive to the goal of raising pH while maintaining a viable proton motive force (PMF). Two compatible hypotheses for mitigating intracellular ammonium toxicity include (i) the exit of protonated ammonium outward via the UreI permease, which was shown to facilitate diffusion of both urea and ammonium, and/or (ii) the assimilation of this ammonium, which is supported by evidence that H. pylori assimilates urea nitrogen into its amino acid pools. We investigated the second hypothesis by constructing strains with altered expression of the ammonium-assimilating enzymes glutamine synthetase (GS) and glutamate dehydrogenase (GDH) and the ammonium-evolving periplasmic enzymes glutaminase (Ggt) and asparaginase (AsnB). H. pylori strains expressing elevated levels of either GS or GDH are more acid tolerant than the wild type, exhibit enhanced ammonium production, and are able to alkalize the medium faster than the wild type. Strains lacking the genes for either Ggt or AsnB are acid sensitive, have 8-fold-lower urea-dependent ammonium production, and are more acid sensitive than the parent. Additionally, we found that purified H. pylori GS produces glutamine in the presence of Mg2+ at a rate similar to that of unadenylated Escherichia coli GS. These data reveal that all four enzymes contribute to whole-cell acid resistance in H. pylori and are likely important for assimilation and/or efflux of urea-derived ammonium. PMID:24936052

  1. PULMONARY FUNCTION IN ELASTASE-TREATED GUINEA PIGS AND RATS EXPOSED TO AMMONIUM SULFATE OR AMMONIUM NITRATE AEROSOLS

    EPA Science Inventory

    Three weeks following intratracheal instillations of elastase dissolved in saline, or saline alone, guinea pigs and rats were exposed for 5 or 20 days, 6 hr/day, 5 days/week to filtered room air, 1 mg/cu.m. ammonium sulfate ((NH4)2SO4) or 1 mg/cu.m. ammonium nitrate (NH4NO3) aero...

  2. Thermophysical properties of aqueous solution of ammonium-based ionic liquids.

    PubMed

    Umapathi, Reddicherla; Attri, Pankaj; Venkatesu, Pannuru

    2014-06-01

    Experimental densities (ρ), ultrasonic sound velocities (u), viscosities (η), and refractive indices (n(D)) of binary mixtures of ammonium-based ionic liquids (ILs) such as diethylammonium acetate (DEAA) [(CH3CH2)2NH][CH3COO], triethylammonium acetate (TEAA) [(CH3CH2)3NH][CH3COO], diethylammonium hydrogen sulfate (DEAS) [(CH3CH2)2NH][HSO4], triethylammonium hydrogen sulfate (TEAS) [(CH3CH2)3NH][HSO4], trimethylammonium acetate (TMAA) [(CH3)3NH][CH3COO], and trimethylammonium hydrogen sulfate (TMAS) [(CH3)3NH][HSO4] with water are reported over the wide composition range at 25 °C under atmospheric pressure. The excess molar volumes (V(E)), deviation in isentropic compressibilities (Δκ(s)), deviation in viscosities (Δη) and deviation in refractive indices (Δn(D)) are calculated from experimental values and are correlated by Redlich-Kister polynomial equations. The V(E) and Δκ(s) values for the aforesaid systems are negative over the entire composition range while the Δη and Δn(D) values are positive under the same experimental conditions. The intermolecular interactions and structural effects were analyzed on the basis of measured and derived properties. A qualitative analysis of the results is discussed in terms of the ion-dipole, ion-pair interactions and hydrogen bonding between ILs and water. Furthermore, the hydrogen bonding features between ILs with water were analyzed by using a molecular modeling program with the help of HyperChem7. PMID:24830564

  3. Adrenocortical suppression in cats given megestrol acetate.

    PubMed

    Chastain, C B; Graham, C L; Nichols, C E

    1981-12-01

    Megestrol acetate was given orally to 8 cats at a dose of 2.5 mg every other day for 2 weeks and to 8 cats at a dose of 5.0 mg every day for 2 weeks. Four cats were designated nontreated controls. Pre-ACTH-stimulated plasma concentrations of cortisol (hydrocortisone) and ACTH-stimulated cortisol and tolerance to large-dose glucose infusion (IV) were determined on each of the 20 cats given megestrol acetate. Cats were restrained with acepromazine maleate and ketamine hydrochloride during blood sample collection and large-dose glucose infusion. Adrenocortical function and tolerance to large-dose glucose infusion were reevaluated for 4 weeks--after 1st and 2nd weeks of megestrol acetate treatment of the treated groups, and after 1st and 2nd weeks when treatment was stopped (ie, experiment weeks 3 and 4). Each week a cat from the control group and 2 cats from the 2 treated groups were selected to determine the changes occurring during the experiment for that week; after collection of plasma samples, each week's 5 selected cats were euthanatized and necropsied. Significant impairment of adrenocortical function and alteration of adrenocortical morphology occurred with both treated groups. The most severe adrenocortical alterations occurred in the cats 1 week after megestrol acetate was no longer given (ie, experiment week 3). Megestrol acetate-induced adrenocortical suppression contributed to the death of 1 cat. It was concluded that if stress occurs to cats on treatment or soon after treatment with megestrol acetate, glucocorticoids should be supplemented. The effects of megestrol acetate on glucose tolerance were overshadowed by the unforeseen intolerance caused by chemical restraint with acepromazine maleate and ketamine hydrochloride. PMID:6280517

  4. Higher Ammonium Transamination Capacity Can Alleviate Glutamate Inhibition on Winter Wheat (Triticum aestivum L.) Root Growth under High Ammonium Stress

    PubMed Central

    Liu, Yang; Tian, Zhongwei; Muhammad, Abid; Zhang, Yixuan; Jiang, Dong; Cao, Weixing; Dai, Tingbo

    2016-01-01

    Most of the studies about NH4+ stress mechanism simply address the effects of free NH4+, failing to recognize the changed nitrogen assimilation products. The objective of this study was to elucidate the effects of glutamate on root growth under high ammonium (NH4+) conditions in winter wheat (Triticum aestivum L.). Hydroponic experiments were conducted using two wheat cultivars, AK58 (NH4+-sensitive) and Xumai25 (NH4+-tolerant) with either 5 mM NH4+ nitrogen (AN) as stress treatment or 5 mM nitrate (NO3-) nitrogen as control. To evaluate the effects of NH4+-assimilation products on plant growth, 1 μM L-methionine sulfoximine (MSO) (an inhibitor of glutamine synthetase (GS)) and 1 mM glutamates (a primary N assimilation product) were added to the solutions, respectively. The AN significantly reduced plant biomass, total root length, surface area and root volume in both cultivars, but less effect was observed in Xumai25. The inhibition effects were alleviated by the application of MSO but strengthened by the application of glutamate. The AN increased the activities of GS, glutamate dehydrogenase (GDH) in both cultivars, resulting in higher glutamate contents. However, its contents were decreased by the application of MSO. Compared to AK58, Xumai25 showed lower glutamate contents due to its higher activities of glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT). With the indole-3-acetic acid (IAA) contents decreasing in roots, the ratio of shoot to root in IAA was increased, and further increased by the application of glutamate, and reduced by the application of MSO, but the ratio was lower in Xumai25. Meanwhile, the total soluble sugar contents and its root to shoot ratio also showed similar trends. These results indicate that the NH4+-tolerant cultivar has a greater transamination ability to prevent glutamate over-accumulation to maintain higher IAA transport ability, and consequently promoted soluble sugar transport to roots, further

  5. Higher Ammonium Transamination Capacity Can Alleviate Glutamate Inhibition on Winter Wheat (Triticum aestivum L.) Root Growth under High Ammonium Stress.

    PubMed

    Wang, Feng; Gao, Jingwen; Liu, Yang; Tian, Zhongwei; Muhammad, Abid; Zhang, Yixuan; Jiang, Dong; Cao, Weixing; Dai, Tingbo

    2016-01-01

    Most of the studies about NH4+ stress mechanism simply address the effects of free NH4+, failing to recognize the changed nitrogen assimilation products. The objective of this study was to elucidate the effects of glutamate on root growth under high ammonium (NH4+) conditions in winter wheat (Triticum aestivum L.). Hydroponic experiments were conducted using two wheat cultivars, AK58 (NH4+-sensitive) and Xumai25 (NH4+-tolerant) with either 5 mM NH4+ nitrogen (AN) as stress treatment or 5 mM nitrate (NO3-) nitrogen as control. To evaluate the effects of NH4+-assimilation products on plant growth, 1 μM L-methionine sulfoximine (MSO) (an inhibitor of glutamine synthetase (GS)) and 1 mM glutamates (a primary N assimilation product) were added to the solutions, respectively. The AN significantly reduced plant biomass, total root length, surface area and root volume in both cultivars, but less effect was observed in Xumai25. The inhibition effects were alleviated by the application of MSO but strengthened by the application of glutamate. The AN increased the activities of GS, glutamate dehydrogenase (GDH) in both cultivars, resulting in higher glutamate contents. However, its contents were decreased by the application of MSO. Compared to AK58, Xumai25 showed lower glutamate contents due to its higher activities of glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT). With the indole-3-acetic acid (IAA) contents decreasing in roots, the ratio of shoot to root in IAA was increased, and further increased by the application of glutamate, and reduced by the application of MSO, but the ratio was lower in Xumai25. Meanwhile, the total soluble sugar contents and its root to shoot ratio also showed similar trends. These results indicate that the NH4+-tolerant cultivar has a greater transamination ability to prevent glutamate over-accumulation to maintain higher IAA transport ability, and consequently promoted soluble sugar transport to roots, further

  6. Acetate Transport and Utilization in the Rat Brain

    PubMed Central

    Deelchand, Dinesh K.; Shestov, Alexander A.; Koski, Dee M.; Uğurbil, Kâmil; Henry, Pierre-Gilles

    2009-01-01

    Acetate, a glial-specific substrate, is an attractive alternative to glucose for the study of neuronal-glial interactions. The present study investigates the kinetics of acetate uptake and utilization in the rat brain in vivo during infusion of [2-13C]acetate using NMR spectroscopy. When plasma acetate concentration was increased, the rate of brain acetate utilization (CMRace) increased progressively and reached close to saturation for plasma acetate concentration > 2-3 mM, whereas brain acetate concentration continued to increase. The Michaelis-Menten constant for brain acetate utilization ( KMutil=0.01±0.14mM) was much smaller than for acetate transport through the blood-brain barrier ( KMt=4.18±0.83mM). The maximum transport capacity of acetate through the blood-brain barrier ( Vmaxt=0.96±0.18μmol/g/min) was nearly two-fold higher than the maximum rate of brain acetate utilization ( Vmaxutil=0.50±0.08μmol/g/min). We conclude that, under our experimental conditions, brain acetate utilization is saturated when plasma acetate concentrations increase above 2-3 mM. At such high plasma acetate concentration, the rate-limiting step for glial acetate metabolism is not the blood-brain barrier, but occurs after entry of acetate into the brain. PMID:19393008

  7. Ammonium and methylammonium transport in Rhodobacter sphaeroides

    SciTech Connect

    Cordts, M.L.; Gibson, J.

    1987-04-01

    Rhodobacter spheroides maintained intracellular ammonium pools of 1.1 to 2.6 mM during growth in several fixed nitrogen sources as well as during diazotrophic growth. Addition of 0.15 mM NH/sub 4//sup +/ to washed, nitrogen-free cell suspensions was followed by linear uptake of NH/sub 4//sup +/ from the medium and transient formation of intracellular pools of 0.9 to 1.5 mM NH/sub 4//sup +/. Transport of NH/sub 4//sup +/ was shown to be independent of assimilation by glutamine synthetase because intracellular pools of over 1 mM represented NH/sub 4//sup +/ concentration gradients of at least 100-fold across the cytoplasmic membrane. Ammonium pools of over 1 mM were also found in non-growing cell suspensions in nitrogen-free medium after glutamine synthetase was inhibited with methionine sulfoximine. In NH/sub 4//sup +/-free cell suspensions, methylammonium (/sup 14/CH/sub 3/NH/sub 3//sup +/) was taken up rapidly, and intracellular concentrations of 0.4 to 0.5 mM were maintained. The /sup 14/CN/sub 3/NH/sub 3//sup +/ pool was not affected by methionine sulfoximine. Unlike NH/sub 4//sup +/ uptake, /sup 14/CH/sub 3/NH/sub 3//sup +/ uptake in nitrogen-free cell suspensions was repressed by growth in NH/sub 4//sup +/. These results suggest that R. sphaeroides may produce an NH/sub 4//sup +/-specific transport system in addition to the NH/sub 4//sup +///sup 14/CH/sub 3/NH/sub 3//sup +/ transporter. This second transporter is able to produce normal-size NH/sub 4//sup +/ pools but has very little affinity for /sup 14/CH/sub 3/NH/sub 3//sup +/ and is not repressed by growth in high concentrations of NH/sub 4//sup +/.

  8. Tested Demonstrations: Buffer Capacity of Various Acetic Acid-Sodium Acetate Systems: A Lecture Experiment.

    ERIC Educational Resources Information Center

    Donahue, Craig J.; Panek, Mary G.

    1985-01-01

    Background information and procedures are provided for a lecture experiment which uses indicators to illustrate the concept of differing buffer capacities by titrating acetic acid/sodium acetate buffers with 1.0 molar hydrochloric acid and 1.0 molar sodium hydroxide. A table with data used to plot the titration curve is included. (JN)

  9. Acetylation of Starch with Vinyl Acetate in Imidazolium Ionic Liquids and Characterization of Acetate Distribution

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Starch was acetylated with vinyl acetate in different 1-butyl-3-methylimidazolium (BMIM) salts as solvent in effort to produce starches with different acetylation patterns. Overall degree of substitution was much higher for basic anions such as acetate and dicyanimide (dca) than for neutral anions ...

  10. 40 CFR 721.10001 - 2-Ethoxyethanol, 2-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... new uses subject to reporting. (1) The chemical substances identified as 2-ethoxyethanol (CAS No. 110-80-5), 2-ethoxyethanol acetate (CAS No. 111-15-9), 2-methoxyethanol (CAS No. 109-86-4), and 2-methoxyethanol acetate (CAS No. 110-49-6) are subject to reporting under this section for the significant new...

  11. 40 CFR 721.10001 - 2-Ethoxyethanol, 2-ethoxyethanol acetate, 2-methoxyethanol, and 2-methoxyethanol acetate.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... new uses subject to reporting. (1) The chemical substances identified as 2-ethoxyethanol (CAS No. 110-80-5), 2-ethoxyethanol acetate (CAS No. 111-15-9), 2-methoxyethanol (CAS No. 109-86-4), and 2-methoxyethanol acetate (CAS No. 110-49-6) are subject to reporting under this section for the significant new...

  12. [Degradation of thiometon in ethyl acetate].

    PubMed

    Satoh, M; Shimokawa, S; Kobata, M; Tanaka, T; Nakanishi, Y

    2001-04-01

    When performing multiresidue analysis of pesticides, the recovery of thiometon was less than 20% from carrots and eggplants, but about 100% from garlic chives and welsh onions. The recovery of thiometon was found to depend on the lot of ethyl acetate. A 2-year-old lot of ethyl acetate caused degradation of thiometon, but a fresh lot of ethyl acetate did not. Analysis showed that ethyl acetate stored for 2 years contained about 5 microL/mL of acetaldehyde. Thiometon was also degraded by acetone or acetonitrile, when acetaldehyde was added to them, in the same manner as by aged ethyl acetate. The fact that the recovery of thiometon from welsh onions was about 100% indicated that some of the mercaptans in allium vegetables may prevent thiometon degradation. Mercaptans such as L-cysteine and 3-mercaptoproionic acid were confirmed to prevent the degradation of thiometon and disulfoton. These findings show that mercaptans may be useful additives for analyzing thiometon and disulfoton. PMID:11486375

  13. Population of Nitrifying Bacteria and Nitrification in Ammonium Saturated Clinoptilolite

    NASA Technical Reports Server (NTRS)

    McGilloway, R. L.; Weaver, R. W.; Ming, Douglas W.; Gruener, J.

    1999-01-01

    As humans begin to spend longer periods of time in space, plants will be incorporated into life support systems. Ammonium saturated clinoptilolite is one plant growth substrate but a balance between ammonium and nitrate is needed. A laboratory study was conducted to determine effects of nitrifying bacteria on ammonium concentrations and kinetics of nitrification. Columns containing clinoptilolite substrate amended with nitrifying bacteria obtained from soil enrichment were analyzed weekly for a 90 day period. The enrichment culture initially contained 1 x 10(exp 5) ammonium oxidizing bacteria and 1 x 10(exp 2) nitrite oxidizing bacteria per gram of substrate. Populations of ammonium oxidizing bacteria increased to 1 x 10(exp 6) and nitrite oxidizing bacteria increased to 1 x 10(exp 3) per gram of substrate. The nitrification rate was approximately 0.25mg NO3(-)-N/kg.hr. Experiments were also conducted to enumerate nitrifying bacteria in a clinoptilolite substrate used to grow wheat (Triticum aestivum L.). Seventy days following the initial inoculation with an unknown number of commercial nitrifying bacteria, 1 x 10(exp 5) ammonium oxidizing bacteria per gram of substrate were present. The number of nitrite oxidizing bacteria was between 1 x 10(exp 3) to 10(exp 4) per gram of substrate as measured by the most probable number method. Nitrification rates were approximately 0.20mg NO3(-)-N/kg.hr. Clinoptilolite readily exchanged sufficient concentrations of ammonium to support nitrifying bacteria and they survived well in this medium.

  14. Acclimation and toxicity of high ammonium concentrations to unicellular algae.

    PubMed

    Collos, Yves; Harrison, Paul J

    2014-03-15

    A literature review on the effects of high ammonium concentrations on the growth of 6 classes of microalgae suggests the following rankings. Mean optimal ammonium concentrations were 7600, 2500, 1400, 340, 260, 100 μM for Chlorophyceae, Cyanophyceae, Prymnesiophyceae, Diatomophyceae, Raphidophyceae, and Dinophyceae respectively and their tolerance to high toxic ammonium levels was 39,000, 13,000, 2300, 3600, 2500, 1200 μM respectively. Field ammonium concentrations <100 μM would not likely reduce the growth rate of most microalgae. Chlorophytes were significantly more tolerant to high ammonium than diatoms, prymnesiophytes, dinoflagellates, and raphidophytes. Cyanophytes were significantly more tolerant than dinoflagellates which were the least tolerant. A smaller but more complete data set was used to estimate ammonium EC₅₀ values, and the ranking was: Chlorophyceae>Cyanophyceae, Dinophyceae, Diatomophyceae, and Raphidophyceae. Ammonia toxicity is mainly attributed to NH₃ at pHs >9 and at pHs <8, toxicity is likely associated with the ammonium ion rather than ammonia. PMID:24533997

  15. Ammonium Hydrosulfide and Jupiter's Great Red Spot

    NASA Astrophysics Data System (ADS)

    Loeffler, M. J.; Hudson, R.; Chanover, N.; Simon, A. A.

    2014-12-01

    The color and composition of Jupiter's Great Red Spot (GRS) has been debated for more than a century. While there are numerous hypotheses for the origin of Jupiter's GRS, recent work suggests that the GRS's color could originate from multiple components (Carlson et al., 2012; Simon et al., submitted). In light of this, we have recently begun conducting in situ laboratory experiments that test whether ammonium hydrosulfide, NH4SH, or its radiation decomposition products contribute to the GRS spectrum. In this presentation, we will discuss some of our most recent results, where we have studied the stability of NH4SH samples as a function of temperature using infrared and mass spectrometry. Funding for this work has been provided by NASA's Planetary Atmospheres and Outer Planets Research programs. ReferencesCarlson, R. W., K. H. Baines, M. S. Anderson, G. Filacchione. Chromophores from photolyzed ammonia reacting with acetylene: Application to Jupiter's Great Red Spot, DPS, 44, 2012. Simon, A. A., J. Legarreta, F. Sanz-Requena, S. Perez-Hoyos, E. Garcia-Melendo, R. W. Carlson. Spectral Comparison and Stability of Red Regions on Jupiter. J. Geophys. Res. - Planets, submitted.

  16. Quaternary ammonium biocides: efficacy in application.

    PubMed

    Gerba, Charles P

    2015-01-01

    Quaternary ammonium compounds (QACs) are among the most commonly used disinfectants. There has been concern that their widespread use will lead to the development of resistant organisms, and it has been suggested that limits should be place on their use. While increases in tolerance to QACs have been observed, there is no clear evidence to support the development of resistance to QACs. Since efflux pumps are believe to account for at least some of the increased tolerance found in bacteria, there has been concern that this will enhance the resistance of bacteria to certain antibiotics. QACs are membrane-active agents interacting with the cytoplasmic membrane of bacteria and lipids of viruses. The wide variety of chemical structures possible has seen an evolution in their effectiveness and expansion of applications over the last century, including non-lipid-containing viruses (i.e., noroviruses). Selection of formulations and methods of application have been shown to affect the efficacy of QACs. While numerous laboratory studies on the efficacy of QACs are available, relatively few studies have been conducted to assess their efficacy in practice. Better standardized tests for assessing and defining the differences between increases in tolerance versus resistance are needed. The ecological dynamics of microbial communities where QACs are a main line of defense against exposure to pathogens need to be better understood in terms of sublethal doses and antibiotic resistance. PMID:25362069

  17. Quaternary Ammonium Biocides: Efficacy in Application

    PubMed Central

    2014-01-01

    Quaternary ammonium compounds (QACs) are among the most commonly used disinfectants. There has been concern that their widespread use will lead to the development of resistant organisms, and it has been suggested that limits should be place on their use. While increases in tolerance to QACs have been observed, there is no clear evidence to support the development of resistance to QACs. Since efflux pumps are believe to account for at least some of the increased tolerance found in bacteria, there has been concern that this will enhance the resistance of bacteria to certain antibiotics. QACs are membrane-active agents interacting with the cytoplasmic membrane of bacteria and lipids of viruses. The wide variety of chemical structures possible has seen an evolution in their effectiveness and expansion of applications over the last century, including non-lipid-containing viruses (i.e., noroviruses). Selection of formulations and methods of application have been shown to affect the efficacy of QACs. While numerous laboratory studies on the efficacy of QACs are available, relatively few studies have been conducted to assess their efficacy in practice. Better standardized tests for assessing and defining the differences between increases in tolerance versus resistance are needed. The ecological dynamics of microbial communities where QACs are a main line of defense against exposure to pathogens need to be better understood in terms of sublethal doses and antibiotic resistance. PMID:25362069

  18. [A case of ammonium urate urinary stones with anorexia nervosa].

    PubMed

    Komori, K; Arai, H; Gotoh, T; Imazu, T; Honda, M; Fujioka, H

    2000-09-01

    A 27-year-old woman had been suffering from bulimia and habitual vomiting for about 7 years and was incidentally found to have right renal stones by computed tomography. She was referred to our hospital for the treatment of these caluculi. On admission, she presented with hypokalemia, hypochloremia and metabolic alkalosis and was diagnosed with anorexia nervosa. Following successful removal by percutaneous nephrolithotripsy and extracorporeal shockwave lithotripsy the stones were found to consist of pure ammonium urate. Since the urine of an anorexia nervosa patient tends to be rich in uric acid and ammonium, anorexia nervosa seems to be associated with ammonium urate urinary stones. PMID:11107533

  19. Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts

    PubMed Central

    Xue, Yan; Xiao, Huining; Zhang, Yi

    2015-01-01

    Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers. PMID:25667977

  20. Megestrol acetate for treatment of endometriosis.

    PubMed

    Schlaff, W D; Dugoff, L; Damewood, M D; Rock, J A

    1990-04-01

    Between 1977-1989, 29 women with symptomatic endometriosis were treated with megestrol acetate by the Johns Hopkins Division of Reproductive Endocrinology. All had previously received one or more alternative medical treatments for endometriosis, in each case discontinued because of poor response or development of unacceptable side effects. Treatment consisted of a daily dose of 40 mg megestrol acetate orally for up to 24 months. Disease-related symptoms (dysmenorrhea, noncyclic pelvic pain, and dyspareunia) were relieved in 86% of the subjects treated with an adequate course of therapy. Side effects were fairly well tolerated, although eight women discontinued treatment within 2 months and two others stopped the drug by 4 months. These preliminary findings suggest that megestrol acetate may be an effective treatment for patients with endometriosis, even those who have been unresponsive to other modes of therapy. PMID:2314784

  1. Comparative study on the effect of electron beam irradiation on the physical properties of ethylene-vinyl acetate copolymer composites

    NASA Astrophysics Data System (ADS)

    Wang, Bibo; Hong, Ningning; Shi, Yongqian; Wang, Biao; Sheng, Haibo; Song, Lei; Tang, Qinbo; Hu, Yuan

    2014-04-01

    Ethylene-vinyl acetate copolymer (EVA) flame retarded by a combination of cellulose acetate butyrate (CAB) microencapsulated ammonium polyphosphate (MCAPP) and polyamide-6 (PA-6) have been crosslinked by high energy electron beam irradiation. The effect of high energy electron beam irradiation on the crosslinking degree, mechanical, electrical and thermal properties of EVA/MCAPP/PA-6 cable material was studied by gel content, heat extention test, mechanical test, dynamic mechanical analysis, high-insulation resistance meter and thermogravimetric analysis. The gel content and heat extention test results showed that the EVA/MCAPP/PA-6 composites can be easily crosslinked by electron beam irradiation. The tensile strength of EVA composites was drastically increased from 16.2 to maximum 26.2 MPa as the electron beam irradiation dose increases from 0 to 160 kGy. The volatilized products of EVA/MCAPP/PA-6 composites were analyzed and compared by thermogravimetric analysis/infrared spectrometry (TG-FTIR).

  2. Rhizobium sp. strain ORS571 ammonium assimilation and nitrogen fixation.

    PubMed Central

    Donald, R G; Ludwig, R A

    1984-01-01

    Among rhizobia studied, Rhizobium sp. strain ORS571 alone grew unambiguously on N2 as sole N source. In ORS571 , only the glutamine synthetase (GS)-glutamate synthase ( GOGAT ) pathway assimilated ammonium. However, ORS571 exhibited two unique physiological aspects of this pathway: ORS571 had only GS I, whereas all other Rhizobiaceae studied had both GS I and GS II, and both NADPH- and NADH-dependent GOGAT activities were present. ORS571 GS-affected and NADPH- GOGAT -affected mutant strains were defective in both ammonium assimilation (Asm-) and N2 fixation (Nif-) in culture and in planta ; NADH- GOGAT mutants were Asm- but Nif+. "Bacteroid" GS activity was essentially nil, suggesting symbiotic ammonium export. Physiological studies on effects of glutamine, ammonium, methionine sulfoximine, and diazo-oxo-norleucine on nitrogenase induction in culture implied a regulatory role for the intracellular glutamine pool. Images PMID:6144666

  3. 21 CFR 73.2298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2298 Ferric ammonium ferrocyanide. (a... ferrocyanide is safe for use in coloring externally applied cosmetics, including cosmetics applied to the...

  4. 21 CFR 73.2298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2298 Ferric ammonium ferrocyanide. (a... ferrocyanide is safe for use in coloring externally applied cosmetics, including cosmetics applied to the...

  5. 21 CFR 73.2298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2298 Ferric ammonium ferrocyanide. (a... ferrocyanide is safe for use in coloring externally applied cosmetics, including cosmetics applied to the...

  6. 21 CFR 73.2298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2298 Ferric ammonium ferrocyanide. (a... ferrocyanide is safe for use in coloring externally applied cosmetics, including cosmetics applied to the...

  7. 21 CFR 73.2298 - Ferric ammonium ferrocyanide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2298 Ferric ammonium ferrocyanide. (a... ferrocyanide is safe for use in coloring externally applied cosmetics, including cosmetics applied to the...

  8. Synthesis and Antibacterial Activity of Novel Quaternary Ammonium Pyridoxine Derivatives.

    PubMed

    Shtyrlin, Nikita V; Sapozhnikov, Sergey V; Koshkin, Sergey A; Iksanova, Alfiya G; Sabirov, Arthur H; Kayumov, Airat R; Nureeva, Aliya A; Zeldi, Marina I; Shtyrlin, Yurii G

    2015-01-01

    A series of 26 quaternary ammonium pyridoxine derivatives were synthesized and their cytotoxicity and antibacterial activities against clinically relevant bacterial strains were tested in vitro. The antibacterial activity of mono-ammonium salts increased with the rise of the lipophilicity and compound 3,3,5-trimethyl-8,8-dioctyl-1,7,8,9-tetrahydro-[1,3]dioxino[5,4-d]pyrrolo[3,4-b]pyridin-8-ium chloride (2d) reaches a maximum among them. Bis-ammonium salt of pyridoxine 4 with two dimethyloctylamine groups also demonstrated high antibacterial activity despite lower lipophilicity. The results of MTT assay indicated that HEK 293 cells were more sensitive than HSF to quaternary ammonium pyridoxine derivatives. Compounds 2d and 4 did not induce the damage of the DNA and might be of interest in the development of new antimicrobials. PMID:25938426

  9. Formation of urea and guanidine by irradiation of ammonium cyanide.

    NASA Technical Reports Server (NTRS)

    Lohrmann, R.

    1972-01-01

    Aqueous solutions of ammonium cyanide yield urea, cyanamide and guanidine when exposed to sunlight or an unfiltered 254 nm ultraviolet source. The prebiotic significance of these results is discussed.

  10. Direct esterification of ammonium salts of carboxylic acids

    DOEpatents

    Halpern, Yuval

    2003-06-24

    A non-catalytic process for producing esters, the process comprising reacting an ammonium salt of a carboxylic acid with an alcohol and removing ammonia from the reaction mixture. Selectivities for the desired ester product can exceed 95 percent.

  11. Methods to Stabilize and Destabilize Ammonium Borohydride

    SciTech Connect

    Nielsen, Thomas K.; Karkamkar, Abhijeet J.; Bowden, Mark E.; Besenbacher, Fleming; Jensen, Torben R.; Autrey, Thomas

    2013-01-21

    Ammonium borohydride, NH4BH4, has a high hydrogen content of ρm = 24.5 wt% H2 and releases 18 wt% H2 below T = 160 °C. However, the half-life of bulk NH4BH4 at ambient temperatures, ~6 h, is insufficient for practical applications. The decomposition of NH4BH4 (ABH2) was studied at variable hydrogen and argon back pressures to investigate possible pressure mediated stabilization effects. The hydrogen release rate from solid ABH2 at ambient temperatures is reduced by ~16 % upon increasing the hydrogen back pressure from 5 to 54 bar. Similar results were obtained using argon pressure and the observed stabilization may be explained by a positive volume of activation in the transition state leading to hydrogen release. Nanoconfinement in mesoporous silica, MCM-41, was investigated as alternative means to stabilize NH4BH4. However, other factors appear to significantly destabilize NH4BH4 and it rapidly decomposes at ambient temperatures into [(NH3)2BH2][BH4] (DADB) in accordance with the bulk reaction scheme. The hydrogen desorption kinetics from nanoconfined [(NH3)2BH2][BH4] is moderately enhanced as evidenced by a reduction in the DSC decomposition peak temperature of ΔT = -13 °C as compared to the bulk material. Finally, we note a surprising result, storage of DADB at temperature < -30 °C transformed, reversibly, the [(NH3)2BH2][BH4] into a new low temperature polymorph as revealed by both XRD and solid state MAS 11B MAS NMR. TA & AK are thankful for support from the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. A portion of the research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle.

  12. Development and Validation of an RP-HPLC Method for Quantitative Estimation of Eslicarbazepine Acetate in Bulk Drug and Tablets

    PubMed Central

    Singh, M.; Kumar, L.; Arora, P.; Mathur, S. C.; Saini, P. K.; Singh, R. M.; Singh, G. N.

    2013-01-01

    A convenient, simple, accurate, precise and reproducible RP-HPLC method was developed and validated for the estimation of eslicarbazepine acetate in bulk drug and tablet dosage form. Objective was achieved under optimised chromatographic conditions on Dionex RP-HPLC system with Dionex C18 column (250×4.6 mm, 5 μm particle size) using mobile phase composed of methanol and ammonium acetate (0.005 M) in the ratio of 70:30 v/v. The separation was achieved using an isocratic elution method with a flow rate of 1.0 ml/ min at room temperature. The effluent was monitored at 230 nm using diode array detector. The retention time of eslicarbazepine acetate is found to be 4.9 min and the standard calibration plot was linear over a concentration range of 10-90 μg/ml with r2=0.9995. The limit of detection and quantification were found to be 3.144 and 9.52 μg/ml, respectively. The amount of eslicarbazepine acetate in bulk and tablet dosage form was found to be 99.19 and 97.88%, respectively. The method was validated statistically using the percent relative standard deviation and the values are found to be within the limits. The recovery studies were performed and the percentage recoveries were found to be 98.33± 0.5%. PMID:24591752

  13. Development and Validation of an RP-HPLC Method for Quantitative Estimation of Eslicarbazepine Acetate in Bulk Drug and Tablets.

    PubMed

    Singh, M; Kumar, L; Arora, P; Mathur, S C; Saini, P K; Singh, R M; Singh, G N

    2013-11-01

    A convenient, simple, accurate, precise and reproducible RP-HPLC method was developed and validated for the estimation of eslicarbazepine acetate in bulk drug and tablet dosage form. Objective was achieved under optimised chromatographic conditions on Dionex RP-HPLC system with Dionex C18 column (250×4.6 mm, 5 μm particle size) using mobile phase composed of methanol and ammonium acetate (0.005 M) in the ratio of 70:30 v/v. The separation was achieved using an isocratic elution method with a flow rate of 1.0 ml/ min at room temperature. The effluent was monitored at 230 nm using diode array detector. The retention time of eslicarbazepine acetate is found to be 4.9 min and the standard calibration plot was linear over a concentration range of 10-90 μg/ml with r(2)=0.9995. The limit of detection and quantification were found to be 3.144 and 9.52 μg/ml, respectively. The amount of eslicarbazepine acetate in bulk and tablet dosage form was found to be 99.19 and 97.88%, respectively. The method was validated statistically using the percent relative standard deviation and the values are found to be within the limits. The recovery studies were performed and the percentage recoveries were found to be 98.33± 0.5%. PMID:24591752

  14. Thermal Decomposition Behavior of Ammonium Perchlorate and of an Ammonium-Perchlorate-Based Composite Propellant

    NASA Technical Reports Server (NTRS)

    Behrens, R.; Minier, L.

    1998-01-01

    The thermal decomposition of ammonium perchlorate (AP) and ammonium-perchlorate-based composite propellants is studied using the simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) technique. The main objective of the present work is to evaluate whether the STMBMS can provide new data on these materials that will have sufficient detail on the reaction mechanisms and associated reaction kinetics to permit creation of a detailed model of the thermal decomposition process. Such a model is a necessary ingredient to engineering models of ignition and slow-cookoff for these AP-based composite propellants. Results show that the decomposition of pure AP is controlled by two processes. One occurs at lower temperatures (240 to 270 C), produces mainly H2O, O2, Cl2, N2O and HCl, and is shown to occur in the solid phase within the AP particles. 200(micro) diameter AP particles undergo 25% decomposition in the solid phase, whereas 20(micro) diameter AP particles undergo only 13% decomposition. The second process is dissociative sublimation of AP to NH3 + HClO4 followed by the decomposition of, and reaction between, these two products in the gas phase. The dissociative sublimation process occurs over the entire temperature range of AP decomposition, but only becomes dominant at temperatures above those for the solid-phase decomposition. AP-based composite propellants are used extensively in both small tactical rocket motors and large strategic rocket systems.

  15. The thermal decomposition behavior of ammonium perchlorate and of an ammonium-perchlorate-based composite propellant

    SciTech Connect

    Behrens, R.; Minier, L.

    1998-03-24

    The thermal decomposition of ammonium perchlorate (AP) and ammonium-perchlorate-based composite propellants is studied using the simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) technique. The main objective of the present work is to evaluate whether the STMBMS can provide new data on these materials that will have sufficient detail on the reaction mechanisms and associated reaction kinetics to permit creation of a detailed model of the thermal decomposition process. Such a model is a necessary ingredient to engineering models of ignition and slow-cookoff for these AP-based composite propellants. Results show that the decomposition of pure AP is controlled by two processes. One occurs at lower temperatures (240 to 270 C), produces mainly H{sub 2}O, O{sub 2}, Cl{sub 2}, N{sub 2}O and HCl, and is shown to occur in the solid phase within the AP particles. 200{micro} diameter AP particles undergo 25% decomposition in the solid phase, whereas 20{micro} diameter AP particles undergo only 13% decomposition. The second process is dissociative sublimation of AP to NH{sub 3} + HClO{sub 4} followed by the decomposition of, and reaction between, these two products in the gas phase. The dissociative sublimation process occurs over the entire temperature range of AP decomposition, but only becomes dominant at temperatures above those for the solid-phase decomposition. AP-based composite propellants are used extensively in both small tactical rocket motors and large strategic rocket systems.

  16. Stoichiometric analysis of ammonium nitrate and ammonium perchlorate with nanosecond laser induced breakdown spectroscopy

    NASA Astrophysics Data System (ADS)

    Sreedhar, S.; Rao, S. Venugopal; Kiran, P. Prem; Tewari, Surya P.; Kumar, G. Manoj

    2010-04-01

    We present our results on the stoichiometric analysis of ammonium nitrate (AN) and ammonium Perchlorate (AP) studied using laser induced breakdown spectroscopy (LIBS) with nanosecond pulses. The LIBS spectra collected for AP and AN, without any gating and using a high resolution spectrometer, exhibited characteristic lines corresponding to O, N, H, C, and K. The Oxygen line at 777.38 nm and three Nitrogen lines (N1, N2, N3) at 742.54 nm, 744.64 nm, 747.12 nm were used for evaluating the Oxygen/Nitrogen ratios. The intensities were calculated using area under the peaks and normalized to their respective transition probabilities and statistical weights. The O/N1 ratios estimated from the LIBS spectra were ~4.94 and ~5.11 for AP and O/N3 ratios were ~1.64 and ~1.47 for AN obtained from two independent measurements. The intensity ratios show good agreement with the actual stoichiometric ratios - four for AP and one for AN.

  17. Heterogeneous reactivity of chlorine atoms with ammonium sulfate and ammonium nitrate particles.

    PubMed

    Ciuraru, Raluca; Gosselin, Sylvie; Visez, Nicolas; Petitprez, Denis

    2012-04-01

    In this laboratory study, model particles of ammonium sulfate (AS) and ammonium nitrate (AN) were exposed to chlorine atoms and uptake experiments were performed in a coated wall flow tube reactor coupled to a molecular beam mass spectrometer. The reactive surfaces were prepared by coating the inner surface of the reactor using two different methods: either by depositing size-selected particles on the halocarbon wax or by spray depositing thin films using a constant output atomizer. The observed uptake coefficients vary for (NH(4))(2)SO(4), ranging from γ(Cl)(AS)≈ 1 × 10(-3) for size-selected particles to γ(Cl)(AS)≈ 6 × 10(-2) for thin films prepared by spray. An uptake coefficient of γ(Cl)(AN)≈ 2.5 × 10(-3) of Cl˙ on size-selected NH(4)NO(3) particles was measured. A heterogeneous recombination of Cl atoms to from Cl(2) molecules was observed for the two surfaces. Furthermore, an ageing process was observed for AS particles, this phenomenon leading to the formation of new chlorine species on the solid substrate. PMID:22374517

  18. Synthesis of Cellulose Acetate from Cotton Byproducts

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Cotton burr and cottonseed hull are relatively inexpensive cotton byproducts. In an effort to derive greater value out of these natural renewable materials, we have succeeded in converting part of them into cellulose acetate without prior chemical breakdown or physical separation of cellulose, ligni...

  19. Advanced Colloids Experiment (ACE-T1)

    NASA Technical Reports Server (NTRS)

    Meyer, William V.; Sicker, Ron; Brown, Dan; Eustace, John

    2015-01-01

    Increment 45 - 46 Science Symposium presentation of Advanced Colloids Experiment (ACE-T1) to RPO. The purpose of this event is for Principal Investigators to present their science objectives, testing approach, and measurement methods to agency scientists, managers, and other investigators.

  20. 21 CFR 184.1185 - Calcium acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Calcium acetate. 184.1185 Section 184.1185 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  1. 21 CFR 556.380 - Melengestrol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Melengestrol acetate. 556.380 Section 556.380 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS TOLERANCES FOR RESIDUES OF NEW ANIMAL DRUGS IN FOOD Specific Tolerances for Residues of New Animal Drugs §...

  2. Heat Bonding of Irradiated Ethylene Vinyl Acetate

    NASA Technical Reports Server (NTRS)

    Slack, D. H.

    1986-01-01

    Reliable method now available for joining parts of this difficult-tobond material. Heating fixture encircles ethylene vinyl acetate multiplesocket part, providing heat to it and to tubes inserted in it. Fixtures specially designed to match parts to be bonded. Tube-and-socket bonds made with this technique subjected to tensile tests. Bond strengths of 50 percent that of base material obtained consistently.

  3. 21 CFR 522.1881 - Prednisolone acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Prednisolone acetate. 522.1881 Section 522.1881 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... used as supportive therapy pre- and postoperatively and for various stress conditions...

  4. Fragrance material review on phenethyl acetate.

    PubMed

    McGinty, D; Vitale, D; Letizia, C S; Api, A M

    2012-09-01

    A toxicologic and dermatologic review of phenethyl acetate when used as a fragrance ingredient is presented. Phenethyl acetate is a member of the fragrance structural group aryl alkyl alcohol simple acid esters (AAASAE). The AAASAE fragrance ingredients are prepared by reacting an aryl alkyl alcohol with a simple carboxylic acid (a chain of 1-4 carbons) to generate formate, acetate, propionate, butyrate, isobutyrate and carbonate esters. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for phenethyl acetate were evaluated, then summarized, and includes: physical properties, acute toxicity, skin irritation, mucous membrane (eye) irritation, skin sensitization, elicitation, toxicokinetics, repeated dose, genotoxicity, and carcinogenicity data. A safety assessment of the entire AAASAE will be published simultaneously with this document. Please refer to Belsito et al. (2012) for an overall assessment of the safe use of this material and all AAASAE in fragrances. PMID:22414644

  5. Reactions of germanium tetrahalides with ketene acetals

    SciTech Connect

    Efimova, I.V.; Kazankova, M.A.; Lutsenko, I.F.

    1985-05-01

    Recently, the authors reported that alkyl vinyl ethers and terminal alkynes are readily germylated by germanium tetrahalides in the presence of a tertiary amine. To extend the range of applicability of this reaction and to obtain additional information on its mechanism, the authors study reactions of ketene acetals with germanium tetrachloride and tetrabromide in the presence of triethylamine.

  6. 21 CFR 184.1721 - Sodium acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium acetate. 184.1721 Section 184.1721 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  7. Process for the preparation of vinyl acetate

    DOEpatents

    Tustin, G.C.; Zoeller, J.R.; Depew, L.S.

    1998-02-17

    This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85 and 200 C and removing the reaction products from the contact zone.

  8. Process for the preparation of vinyl acetate

    DOEpatents

    Tustin, Gerald Charles; Zoeller, Joseph Robert; Depew, Leslie Sharon

    1998-01-01

    This invention pertains to the preparation of vinyl acetate by contacting within a contact zone a mixture of ketene and acetaldehyde with an acid catalyst at about one bar pressure and between about 85.degree. and 200.degree. C. and removing the reaction products from the contact zone.

  9. Removal of ammonium from municipal landfill leachate using natural zeolites.

    PubMed

    Ye, Zhihong; Wang, Jiawen; Sun, Lingyu; Zhang, Daobin; Zhang, Hui

    2015-01-01

    Ammonium ion-exchange performance of the natural zeolite was investigated in both batch and column studies. The effects of zeolite dosage, contact time, stirring speed and pH on ammonium removal were investigated in batch experiments. The result showed that ammonium removal efficiency increased with an increase in zeolite dosage from 25 to 150 g/L, and an increase in stirring speed from 200 to 250 r/min. But further increase in zeolite dosage and stirring speed would result in an unpronounced increase of ammonium removal. The optimal pH for the removal of ammonium was found as 7.1. In the column studies, the effect of flow rate was investigated, and the total ammonium removal percentage during 180 min operation time decreased with the flow rate though the ion-exchange capacity varied to a very small extent with the flow rate ranging from 4 to 9 mL/min. The spent zeolite was regenerated by sodium chloride solution and the ammonia removal capacity of zeolite changed little or even increased after three regeneration cycles. PMID:26510611

  10. Anaerobic ammonium oxidation by anammox bacteria in the Black Sea

    NASA Astrophysics Data System (ADS)

    Kuypers, Marcel M. M.; Sliekers, A. Olav; Lavik, Gaute; Schmid, Markus; Jørgensen, Bo Barker; Kuenen, J. Gijs; Sinninghe Damsté, Jaap S.; Strous, Marc; Jetten, Mike S. M.

    2003-04-01

    The availability of fixed inorganic nitrogen (nitrate, nitrite and ammonium) limits primary productivity in many oceanic regions. The conversion of nitrate to N2 by heterotrophic bacteria (denitrification) is believed to be the only important sink for fixed inorganic nitrogen in the ocean. Here we provide evidence for bacteria that anaerobically oxidize ammonium with nitrite to N2 in the world's largest anoxic basin, the Black Sea. Phylogenetic analysis of 16S ribosomal RNA gene sequences shows that these bacteria are related to members of the order Planctomycetales performing the anammox (anaerobic ammonium oxidation) process in ammonium-removing bioreactors. Nutrient profiles, fluorescently labelled RNA probes, 15N tracer experiments and the distribution of specific `ladderane' membrane lipids indicate that ammonium diffusing upwards from the anoxic deep water is consumed by anammox bacteria below the oxic zone. This is the first time that anammox bacteria have been identified and directly linked to the removal of fixed inorganic nitrogen in the environment. The widespread occurrence of ammonium consumption in suboxic marine settings indicates that anammox might be important in the oceanic nitrogen cycle.

  11. Catalytic Deprotection of Acetals In Strongly Basic Solution Usinga Self-Assembled Supramolecular 'Nanozyme'

    SciTech Connect

    Pluth, Michael D.; Bergman, Robert G.; Raymond, Kenneth N.

    2007-07-26

    Acetals are among the most commonly used protecting groups for aldehydes and ketones in organic synthesis due to their ease of installation and resistance to cleavage in neutral or basic solution.[1] The common methods for hydrolyzing acetals almost always involve the use of either Broensted acid or Lewis acid catalysts.[2] Usually aqueous acids or organic solutions acidified with organic or inorganic acids have been used for reconversion of the acetal functionality to the corresponding carbonyl group; however, recently a number of reports have documented a variety of strategies for acetal cleavage under mild conditions. These include the use of Lewis acids such as bismuth(III)[3] or cerium(IV),[4, 5] functionalized silica gel, such as silica sulfuric acid[6] or silica-supported pyridinium p-toluene sulfonate,[7] or the use of silicon-based reagents such as TESOTf-2,6-Lutidine.[8] Despite these mild reagents, all of the above conditions require either added acid or overall acidic media. Marko and co-workers recently reported the first example of acetal deprotection under mildly basic conditions using catalytic cerium ammonium nitrate at pH 8 in a water-acetonitrile solution.[5] Also recently, Rao and co-workers described a purely aqueous system at neutral pH for the deprotection of acetals using {beta}-cyclodextrin as the catalyst.[9] Herein, we report the hydrolysis of acetals in strongly basic aqueous solution using a self-assembled supramolecular host as the catalyst. During the last decade, we have used metal-ligand interactions for the formation of well-defined supramolecular assemblies with the stoichiometry M{sub 4}L{sub 6}6 (M = Ga{sup III} (1 refers to K{sub 12}[Ga{sub 4}L{sub 6}]), Al{sup III}, In{sup III}, Fe{sup III}, Ti{sup IV}, or Ge{sup IV}, L = N,N{prime}-bis(2,3-dihydroxybenzoyl)-1,5-diaminonaphthalene) (Figure 1).[10] The metal ions occupy the vertices of the tetrahedron and the bisbidentate catecholamide ligands span the edges. The strong

  12. Phenyl Acetate Preparation from Phenol and Acetic Acid: Reassessment of a Common Textbook Misconception.

    ERIC Educational Resources Information Center

    Hocking, M. B.

    1980-01-01

    Reassesses a common textbook misconception that "...phenols cannot be esterified directly." Results of experiments are discussed and data tables provided of an effective method for the direct preparation of phenyl acetate. (CS)

  13. Ammonium removal from high-strength aqueous solutions by Australian zeolite.

    PubMed

    Wijesinghe, D Thushari N; Dassanayake, Kithsiri B; Sommer, Sven G; Jayasinghe, Guttila Y; J Scales, Peter; Chen, Deli

    2016-07-01

    Removal of ammonium nitrogen (NH4(+)-N) particularly from sources which are highly rich in nitrogen is important for addressing environmental pollution. Zeolites, aluminosilicate minerals, are commonly used as commercial adsorbents and ion-exchange medium in number of commercial applications due to its high adsorption capacity of ammonium (NH4(+)). However, detailed investigations on NH4(+) adsorption and ion exchange capacities of Australian natural zeolites are rare, particularly under higher NH4(+) concentrations in the medium. Therefore, this study was conducted to determine NH4(+) adsorption characteristics of Australian natural zeolites at high NH4(+) concentrations with and without other chemical compounds in an aqueous solution. Results showed that initial NH4(+) concentration, temperature, reaction time, and pH of the solution had significant effects on NH4(+) adsorption capacity of zeolite. Increased retention time and temperature generally had a positive impact on adsorption. Freundlich model fitted well with adsorption process of Australian natural zeolites; however, Langmuir model had best fitted for the adsorption process of sodium (Na(+)) treated zeolites. NaCl treatment increased the NH4(+) adsorption capacity of Australian zeolites by 25% at 1000 mg-N, NH4(+) solution. The maximum adsorption capacity of both natural Australian zeolites and Na(+) treated zeolites were estimated as 9.48 and 11.83 mg-N/g, respectively, which is lower than many zeolites from other sources. Compared to the NH4(+) only medium, presence of other competitive ions and acetic acid in the medium (resembling composition in digested swine manure slurries) reduced NH4(+) removal of natural and Na(+) treated zeolites by 44% and 57%, respectively. This suggests detailed investigations are required to determine practically achievable NH4(+) -N removal potential of zeolites for applications in complex mediums such as animal manure slurries. PMID:27050255

  14. Difluprednate 0.05% Versus Prednisolone Acetate 1% for Endogenous Anterior Uveitis: A Phase III, Multicenter, Randomized Study

    PubMed Central

    Sheppard, John D.; Toyos, Melissa M.; Kempen, John H.; Kaur, Paramjit; Foster, C. Stephen

    2014-01-01

    Purpose. Endogenous anterior uveitis (AU), when untreated, may lead to vision loss. This study compared the safety and efficacy of difluprednate versus prednisolone acetate for the treatment of this condition. Methods. This phase III, double-masked, noninferiority study randomized patients with mild to moderate endogenous AU to receive difluprednate 0.05% (n = 56) four times daily, alternating with vehicle four times daily, or prednisolone acetate 1% (n = 54) eight times daily. The 14-day treatment period was followed by a 14-day dose-tapering period and a 14-day observation period. The primary efficacy end point was change in anterior chamber cell grade (range, 0 for ≤1 cell to 4 for >50 cells) from baseline to day 14. Results. At day 14, the mean change in anterior chamber cell grade with difluprednate was noninferior to that with prednisolone acetate (−2.2 vs. −2.0, P = 0.16). The proportions of difluprednate-treated patients versus prednisolone acetate–treated patients demonstrating complete clearing of anterior chamber cells at day 3 were 13.0% vs. 2.1% (P = 0.046) and at day 21 were 73.9% vs. 63.8% (P = 0.013). A significant between-group difference in the mean IOP increase was seen at day 3 (2.5 mm Hg for difluprednate-treated patients and 0.1 mm Hg for prednisolone acetate–treated patients, P = 0.0013) but not at other time points. The mean IOP values in both groups remained less than 21 mm Hg throughout the study. Conclusions. Difluprednate 0.05% four times daily is well tolerated and is noninferior to prednisolone acetate 1% eight times daily for the treatment of endogenous AU. (ClinicalTrials.gov number, NCT01201798.) PMID:24677110

  15. Ammonium inhibition of nitrogenase activity in Herbaspirillum seropedicae

    SciTech Connect

    Fu, H.; Burris, R.H. )

    1989-06-01

    The effect of oxygen, ammonium ion, and amino acids on nitrogenase activity in the root-associated N{sub 2}-fixing bacterium Herbaspirillum seropedicae was investigated in comparison with Azospirillum spp. and Rhodospirillum rubrum. H. seropedicae is microaerophilic, and its optimal dissolved oxygen level is from 0.04 to 0.2 kPa for dinitrogen fixation but higher when it is supplied with fixed nitrogen. No nitrogenase activity was detected when the dissolved O{sub 2} level corresponded to 4.0 kPa. Ammonium, a product of the nitrogenase reaction, reversible inhibited nitrogenase activity when added to derepressed cell cultures. However, the inhibition of nitrogenase activity was only partial even with concentrations of ammonium chloride as high as 20 mM. Amides such as glutamine and asparagine partially inhibited nitrogenase activity, but glutamate did not. Nitrogenase in crude extracts prepared from ammonium-inhibited cells showed activity as high as in extracts from N{sub 2}-fixing cells. The pattern of the dinitrogenase and the dinitrogenase reductase revealed by the immunoblotting technique did not change upon ammonium chloride treatment of cells in vivo. No homologous sequences were detected with the draT-draG probe from Azospirillum lipoferum. There is no clear evidence that ADP-ribosylation of the dinitrogenase reductase is involved in the ammonium inhibition of H. seropedicae. The uncoupler carbonyl cyanide m-chlorophenylhydrazone decreased the intracellular ATP concentration and inhibited the nitrogenase activity of whole cells. The ATP pool was significantly disturbed when cultures were treated with ammonium in vivo.

  16. 21 CFR 582.5892 - a-Tocopherol acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5892 a-Tocopherol acetate. (a) Product. a-Tocopherol acetate. (b) Conditions of use....

  17. Expression of acetate permease-like (apl) genes in subsurface communities of Geobacter species under fluctuating acetate concentrations

    SciTech Connect

    Elifantz, H.; N'Guessan, L.A.; Mouser, P.J.; Williams, K H.; Wilkins, M J.; Risso, C.; Holmes, D.E.; Long, P.E.; Lovley, D.R.

    2010-03-01

    The addition of acetate to uranium-contaminated aquifers in order to stimulate the growth and activity of Geobacter species that reduce uranium is a promising in situ bioremediation option. Optimizing this bioremediation strategy requires that sufficient acetate be added to promote Geobacter species growth. We hypothesized that under acetate-limiting conditions, subsurface Geobacter species would increase the expression of either putative acetate symporters genes (aplI and aplII). Acetate was added to a uranium-contaminated aquifer (Rifle, CO) in two continuous amendments separated by 5 days of groundwater flush to create changing acetate concentrations. While the expression of aplI in monitoring well D04 (high acetate) weakly correlated with the acetate concentration over time, the transcript levels for this gene were relatively constant in well D08 (low acetate). At the lowest acetate concentrations during the groundwater flush, the transcript levels of aplII were the highest. The expression of aplII decreased 2-10-fold upon acetate reintroduction. However, the overall instability of acetate concentrations throughout the experiment could not support a robust conclusion regarding the role of apl genes in response to acetate limitation under field conditions, in contrast to previous chemostat studies, suggesting that the function of a microbial community cannot be inferred based on lab experiments alone.

  18. Expression of Acetate Permease-like (apl) Genes in Subsurface Communities of Geobacter Species Under Fluctuating Acetate Concentrations

    SciTech Connect

    Elifantz, H; N'Guessan, A L; Mouser, Paula; Williams, Kenneth H; Wilkins, Michael J; Risso, Carla; Holmes, Dawn; Long, Philip E; Lovley, Derek R

    2010-09-01

    The addition of acetate to uranium-contaminated aquifers in order to stimulate the growth and activity of Geobacter species that reduce uranium is a promising in situ bioremediation option. Optimizing this bioremediation strategy requires that sufficient acetate be added to promote Geobacter species growth. We hypothesized that under acetate-limiting conditions, subsurface Geobacter species would increase the expression of either putative acetate symporters genes (aplI and aplII). Acetate was added to a uranium-contaminated aquifer (Rifle, CO) in two continuous amendments separated by 5 days of groundwater flush to create changing acetate concentrations. While the expression of aplI in monitoring well D04 (high acetate) weakly correlated with the acetate concentration over time, the transcript levels for this gene were relatively constant in well D08 (low acetate). At the lowest acetate concentrations during the groundwater flush, the transcript levels of aplII were the highest. The expression of aplII decreased 2–10-fold upon acetate reintroduction. However, the overall instability of acetate concentrations throughout the experiment could not support a robust conclusion regarding the role of apl genes in response to acetate limitation under field conditions, in contrast to previous chemostat studies, suggesting that the function of a microbial community cannot be inferred based on lab experiments alone.

  19. Separating acetic acid from furol (furfural) by electrodialysis method

    SciTech Connect

    Guan, S.F.; Li, C.S. Ye, S.T.; Shen, S.Y.; Wang, Y.T.; Yu, S.H.

    1981-01-01

    Furfural production by hydrolysis of fibrous plant materials is accompanied by formation of acetic acid in amounts depending on the material used. The amount of acetic formed in the hydrolysis of the fruit shell of oil-tea camellia (Camellia oleosa) (an oilseed-bearing tree) is equal to the amount of furfural. The acetic acid can be separated from the furfural and concentrated to 10% by electrodialysis. A smaller amount of furfural is separated with acetic acid.

  20. Cyproterone acetate in treatment of precocious puberty.

    PubMed Central

    Kauli, R; Pertzelan, A; Prager-Lewin, R; Grünebaum, M; Laron, Z

    1976-01-01

    Twenty-nine children (23 girls, 6 boys) with precocious puberty were treated with cyproterone acetate for various periods of time ranging from 6 months to 3 years 4 months. They received an oral dose ranging from 70-150 mg/m2 per day, or an intramuscular depot injection once a fortnight or once a month at a dose ranging from 107-230 mg/m2. Both forms of therapy were found to suppress the signs of sexual maturation, but the oral form proved to be superior. Only the younger patients with a bone age under 11 years showed a beneficial effect upon linear growth and bone maturation. No side effects were noted, but additional advantageous effects upon behaviour and sociability were. It is concluded that at present cyproterone acetate by mouth is the drug of choice in the treatment of precocious puberty. The treatment should be initiated as early as possible to attain maximum benefit. PMID:952553

  1. Facile hydrolysis and alcoholysis of palladium acetate.

    PubMed

    Bedford, Robin B; Bowen, John G; Davidson, Russell B; Haddow, Mairi F; Seymour-Julen, Annabelle E; Sparkes, Hazel A; Webster, Ruth L

    2015-05-26

    Palladium(II) acetate is readily converted into [Pd3 (μ(2) -OH)(OAc)5 ] (1) in the presence of water in a range of organic solvents and is also slowly converted in the solid state. Complex 1 can also be formed in nominally anhydrous solvents. Similarly, the analogous alkoxide complexes [Pd3 (μ(2) -OR)(OAc)5 ] (3) are easily formed in solutions of palladium(II) acetate containing a range of alcohols. An examination of a representative Wacker-type oxidation shows that the Pd-OH complex 1 and a related Pd-oxo complex 4 can be excluded as potential catalytic intermediates in the absence of exogenous water. PMID:25865439

  2. Thermochemical characteristics of cellulose acetates with different degrees of acetylation

    NASA Astrophysics Data System (ADS)

    Larina, V. N.; Ur'yash, V. F.; Kushch, D. S.

    2012-12-01

    The standard enthalpies of combustion and formation of cellulose acetates with different degrees of acetylation are determined. It is established that there is a proportional dependence of these thermochemical characteristics vs. the degree of acetylation, weight fraction of bonded acetic acid, and molar mass of the repeating unit of cellulose acetates.

  3. Acetate concentrations and oxidation in salt marsh sediments

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Acetate concentrations and rates of acetate oxidation and sulfate reduction were measured in S. alterniflora sediments in New Hampshire and Massachusetts. Pore water extracted from cores by squeezing or centrifugation contained in greater than 0.1 mM acetate and, in some instances, greater than 1.0 mM. Pore water sampled nondestructively contained much less acetate, often less than 0.01 mM. Acetate was associated with roots, and concentrations varied with changes in plant physiology. Acetate turnover was very low whether whole core or slurry incubations were used. Radiotracers injected directly into soils yielded rates of sulfate reduction and acetate oxidation not significantly different from core incubation techniques. Regardless of incubation method, acetate oxidation did not account for a substantial percentage of sulfate reduction. These results differ markedly from data for unvegetated coastal sediments where acetate levels are low, oxidation rate constants are high, and acetate oxication rates greatly exceed rates of sulfate reduction. The discrepancy between rates of acetate oxidation and sulfate reduction in these marsh soils may be due either to the utilization of substrates other than acetate by sulfate reducers or artifacts associated with measurements of organic utilization by rhizosphere bacteria. Care must be taken when interpreting data from salt marsh sediments since the release of material from roots during coring may affect the concentrations of certain compounds as well as influencing results obtained when sediment incubations are employed.

  4. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Ethyl alcohol containing ethyl acetate....

  5. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Ethyl alcohol containing ethyl acetate....

  6. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Ethyl alcohol containing ethyl acetate....

  7. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ethyl alcohol containing ethyl acetate....

  8. 21 CFR 584.200 - Ethyl alcohol containing ethyl acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Ethyl alcohol containing ethyl acetate. The feed additive ethyl alcohol containing ethyl acetate meets the requirement of 27 CFR 21.62, being not less than 92.5 percent ethyl alcohol, each 100 gallons... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Ethyl alcohol containing ethyl acetate....

  9. Kinetics of Ethyl Acetate Synthesis Catalyzed by Acidic Resins

    ERIC Educational Resources Information Center

    Antunes, Bruno M.; Cardoso, Simao P.; Silva, Carlos M.; Portugal, Ines

    2011-01-01

    A low-cost experiment to carry out the second-order reversible reaction of acetic acid esterification with ethanol to produce ethyl acetate is presented to illustrate concepts of kinetics and reactor modeling. The reaction is performed in a batch reactor, and the acetic acid concentration is measured by acid-base titration versus time. The…

  10. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  11. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  12. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  13. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  14. 21 CFR 582.5933 - Vitamin A acetate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Vitamin A acetate. 582.5933 Section 582.5933 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5933 Vitamin A acetate. (a) Product. Vitamin A acetate. (b) Conditions of use....

  15. Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

    SciTech Connect

    Daoudi, El Mehdi; Boughaleb, Yahia; El Gaini, Layla; Meghea, Irina; Bakasse, Mina

    2013-05-15

    Highlights: ► The modification of montmorillonites by three surfactants increases the basal spacing. ► The model proposed show a bilayer conformation for the surfactant ODTMA. ► The DODMA and TOMA surfactants adopt a paraffin type arrangement. ► Behavior of surfactants in interlayer space was confirmed by TGA and ATR analysis. - Abstract: The objective of this work was to study the conformation of the quaternary ammonium cations viz., octadecyl trimethyl ammonium (ODTMA), dioctadecyl dimethyl ammonium (DMDOA) and trioctadecyl methyl ammonium (TOMA) intercalated within montmorillonite. The modified montmorillonite was characterized by X-ray diffraction in small angle (SAXS), thermal analysis (TGA) and infrared spectroscopy of attenuated total reflection (ATR). The modification of organophilic montmorillonites by the three surfactants ODTMA, DMDOA and TOMA increases the basal spacing from their respective intercalated distances of 1.9 nm, 2.6 nm and 3.4 nm respectively. The increase in the spacing due to the basic organic modification was confirmed by the results of thermal analysis (TGA) and infrared spectroscopy (ATR), and also supported by theoretical calculations of longitudinal and transversal chain sizes of these alkyl quaternary ammonium cations.

  16. Effects of bisphenol A on ammonium assimilation in soybean roots.

    PubMed

    Sun, Hai; Wang, Li Hong; Zhou, Qing; Huang, Xiao Hua

    2013-12-01

    Bisphenol A (BPA), which is ubiquitous in the environment, is an example of an endocrine-disrupting compound (EDC). Ammonium assimilation has an important function in plant growth and development. However, insufficient information on the potential effect of BPA on ammonium assimilation in plants is available. In this study, the effects of BPA on ammonium assimilation in roots of soybean seedlings were investigated. During the stress period, 1.5 mg L(-1) of BPA improved glutamine synthetase (GS)/glutamate synthase (GOGAT) cycle and glutamate dehydrogenase (GDH) pathway in ammonium assimilation. The amino acid and the soluble protein contents increased in the soybeans. At 17.2 and 50.0 mg L(-1) of BPA, the GS/GOGAT cycle was inhibited and the GDH pathway was promoted. The amino acid content increased and the soluble protein content decreased. During the recovery period, the GS/GOGAT cycle and the GDH pathway recovered at 1.5 and 17.2 mg L(-1) of BPA but not at 50.0 mg L(-1) of BPA. The amino acid content continuously increased and the soluble protein content decreased compared with those in the control treatment. In summary, BPA treatment could affect the contents of soluble protein and amino acid in the soybean roots by regulating ammonium assimilation. PMID:23649602

  17. Simultaneous removal of ammonium and suspended solids in multipurpose filters.

    PubMed

    Alkas, Deniz; Baykal, Bilsen Beler; Kinaci, Cumali

    2012-06-01

    A multipurpose filter in which sand and clinoptilolite are used together as filter material is suggested for the simultaneous removal of suspended solids and ammonium in one single unit. The capacity of the clinoptilolite used was determined as 10.4 mg/g for 20 mg/l initial ammonium concentration. In addition, a packed column ion exchanger with clinoptilolite and a classical sand filter were also investigated for comparison. Ammonium and suspended solids removal rates were observed and compared for all columns. The results of the column analysis have revealed that the ammonium removal rate, which was only 20% in the sand column, was increased to 100% by replacing 50% of the sand with clinoptilolite; similarly, the suspended solids removal, which was only 17% in the clinoptilolite column, was increased to 75% by replacing 50% of the clinoptilolite with sand. As such, when ion exchange and filtration processes were carried out in a multipurpose column, high removals for both parameters could be obtained simultaneously. Multipurpose columns could be an alternative both for the upgrading of existing treatment plants or for new plants for simultaneous removal of ammonium and suspended solids, giving considerable savings in terms of land requirements. PMID:22856296

  18. Electrospray Ionization Tandem Mass Spectrometry of Ammonium Cationized Polyethers

    NASA Astrophysics Data System (ADS)

    Nasioudis, Andreas; Heeren, Ron M. A.; van Doormalen, Irene; de Wijs-Rot, Nicolette; van den Brink, Oscar F.

    2011-05-01

    Quaternary ammonium salts (Quats) and amines are known to facilitate the MS analysis of high molar mass polyethers by forming low charge state adduct ions. The formation, stability, and behavior upon collision-induced dissociation (CID) of adduct ions of polyethers with a variety of Quats and amines were studied by electrospray ionization quadrupole time-of-flight, quadrupole ion trap, and linear ion trap tandem mass spectrometry (MS/MS). The linear ion trap instrument was part of an Orbitrap hybrid mass spectrometer that allowed accurate mass MS/MS measurements. The Quats and amines studied were of different degree of substitution, structure, and size. The stability of the adduct ions was related to the structure of the cation, especially the amine's degree of substitution. CID of singly/doubly charged primary and tertiary ammonium cationized polymers resulted in the neutral loss of the amine followed by fragmentation of the protonated product ions. The latter reveals information about the monomer unit, polymer sequence, and endgroup structure. In addition, the detection of product ions retaining the ammonium ion was observed. The predominant process in the CID of singly charged quaternary ammonium cationized polymers was cation detachment, whereas their doubly charged adduct ions provided the same information as the primary and tertiary ammonium cationized adduct ions. This study shows the potential of specific amines as tools for the structural elucidation of high molar mass polyethers.

  19. Removal of sulfur oxides from gas streams with ammonium sulfite

    SciTech Connect

    Spitz, A.W.

    1986-05-20

    A process is described for removal of sulfur oxides from sulfur oxide containing flue gases comprising scrubbing the flue gases in the first stage scrubber with an ammonium sulfite solution to remove most of the sulfur oxides and producing a liquor comprising ammonium sulfite, bisulfite and sulfate salts; recycling the liquor in the first state scrubber and producing a 40% to 50% solution of dissolved ammonium sulfite, bisulfite and sulfate salts in a first stage reservoir while maintaining the pH between about 5 and 5.8; maintaining the ratio of bisulfite to sulfite between approximately 2.3 to 1 and 1 to 1 without liberating ammonia; removing portions of the 40% to 50% solution of dissolved salts from the first stage reservoir; scrubbing the flue gases in a second stage scrubber with an ammonium sulfite solution of pH between 6.2 and 6.8 to remove additional sulfur oxides and producing a dilute liquor of 1% to 10% solids comprising ammonium sulfite, bisulfite and sulfate salts in a second stage reservoir; and pumping the dilute liquor from the second stage reservoir to the first stage reservoir in amounts sufficient to replace the removed portions.

  20. Loss of Fine Particle Ammonium from Denuded Nylon Filters

    SciTech Connect

    Yu, Xiao-Ying; Lee, Taehyoung; Ayres, Benjamin; Kreidenweis, Sonia M.; Malm, William C.; Collett, Jeffrey L.

    2006-08-01

    Ammonium is an important constituent of fine particulate mass in the atmosphere, but can be difficult to quantify due to possible sampling artifacts. Losses of semivolatile species such as NH4NO3 can be particularly problematic. In order to evaluate ammonium losses from aerosol particles collected on filters, a series of field experiments was conducted using denuded nylon and Teflon filters at Bondville, Illinois (February 2003), San Gorgonio, California (April 2003 and July 2004), Grand Canyon National Park, Arizona (May, 2003), Brigantine, New Jersey (November 2003), and Great Smoky Mountains National Park (NP), Tennessee (July–August 2004). Samples were collected over 24-hr periods. Losses from denuded nylon filters ranged from 10% (monthly average) in Bondville, Illinois to 28% in San Gorgonio, California in summer. Losses on individual sample days ranged from 1% to 65%. Losses tended to increase with increasing diurnal temperature and relative humidity changes and with the fraction of ambient total N(--III) (particulate NH4+ plus gaseous NH3) present as gaseous NH3. The amount of ammonium lost at most sites could be explained by the amount of NH4NO3 present in the sampled aerosol. Ammonium losses at Great Smoky Mountains NP, however, significantly exceeded the amount of NH4NO3 collected. Ammoniated organic salts are suggested as additional important contributors to observed ammonium loss at this location.

  1. Co-fermentation of acetate and sugars facilitating microbial lipid production on acetate-rich biomass hydrolysates.

    PubMed

    Gong, Zhiwei; Zhou, Wenting; Shen, Hongwei; Yang, Zhonghua; Wang, Guanghui; Zuo, Zhenyu; Hou, Yali; Zhao, Zongbao K

    2016-05-01

    The process of lignocellulosic biomass routinely produces a stream that contains sugars plus various amounts of acetic acid. As acetate is known to inhibit the culture of microorganisms including oleaginous yeasts, little attention has been paid to explore lipid production on mixtures of acetate and sugars. Here we demonstrated that the yeast Cryptococcus curvatus can effectively co-ferment acetate and sugars for lipid production. When mixtures of acetate and glucose were applied, C. curvatus consumed both substrates simultaneously. Similar phenomena were also observed for acetate and xylose mixtures, as well as acetate-rich corn stover hydrolysates. More interestingly, the replacement of sugar with equal amount of acetate as carbon source afforded higher lipid titre and lipid content. The lipid products had fatty acid compositional profiles similar to those of cocoa butter, suggesting their potential for high value-added fats and biodiesel production. This co-fermentation strategy should facilitate lipid production technology from lignocelluloses. PMID:26874438

  2. Multiple-anion nonvolatile acetal (MANA) resists

    NASA Astrophysics Data System (ADS)

    Guevremont, Jeffrey M.; Brainard, Robert L.; Reeves, Scott D.; Zhou, Xin; Nguyen, Thinh B.; Mackevich, Joseph F.; Anderson, Erik H.; Taylor, Gary N.

    2001-08-01

    New acetal or ketal blocking reagents were investigated for use in e-beam lithography and compared with the performance of ethyl vinyl either (EVE). Three blocking groups, (alpha) -Angelicalactone (AL), 6-methylene-5,6-benzo-1,4- dioxane (MBD), and MANA50 (an undisclosed blocking group used to show the potential of this chemistry) were reacted with poly(p-hydroxystyrene) (PHS) under acid catalyzed conditions to form AL-PHS, MBD-PHS, MANA50-PHS. The performance objectives pursued in the design of these new materials was to use acetal (ketal) chemistry to deliver wide process latitudes (e.g. good PED performance and minimal PEB sensitivity), use high molecular weight blocking groups to eliminate outgassing, and use the novel concept of multiple anions to deliver lithographic performance. These new materials are called Multiple Anion Nonvolatile Acetal (MANA) resists. Resists films were exposed with 50kV electrons, post exposure baked (PEB), and developed with 0.26 N TMAH. Resists prepared with the third blocking group, MANA50, gave contrast and imaging performance independent of PEB humidity and were relatively insensitive to PEB temperature and post exposure delay (PED). These resists gave the best resolution (90 nm) and profiles of all the materials tested, as well as showing no outgassing (as measured by film thickness loss).

  3. Analysis of the key enzymes of butyric and acetic acid fermentation in biogas reactors

    PubMed Central

    Gabris, Christina; Bengelsdorf, Frank R; Dürre, Peter

    2015-01-01

    This study aimed at the investigation of the mechanisms of acidogenesis, which is a key process during anaerobic digestion. To expose possible bottlenecks, specific activities of the key enzymes of acidification, such as acetate kinase (Ack, 0.23–0.99 U mg−1 protein), butyrate kinase (Buk, < 0.03 U mg−1 protein) and butyryl-CoA:acetate-CoA transferase (But, 3.24–7.64 U mg−1 protein), were determined in cell free extracts of biogas reactor content from three different biogas reactors. Furthermore, the detection of Ack was successful via Western blot analysis. Quantification of corresponding functional genes encoding Buk (buk) and But (but) was not feasible, although an amplification was possible. Thus, phylogenetic trees were constructed based on respective gene fragments. Four new clades of possible butyrate-producing bacteria were postulated, as well as bacteria of the genera Roseburia or Clostridium identified. The low Buk activity was in contrast to the high specific But activity in the analysed samples. Butyrate formation via Buk activity does barely occur in the investigated biogas reactor. Specific enzyme activities (Ack, Buk and But) in samples drawn from three different biogas reactors correlated with ammonia and ammonium concentrations (NH3 and NH4+-N), and a negative dependency can be postulated. Thus, high concentrations of NH3 and NH4+-N may lead to a bottleneck in acidogenesis due to decreased specific acidogenic enzyme activities. PMID:26086956

  4. Analysis of the key enzymes of butyric and acetic acid fermentation in biogas reactors.

    PubMed

    Gabris, Christina; Bengelsdorf, Frank R; Dürre, Peter

    2015-09-01

    This study aimed at the investigation of the mechanisms of acidogenesis, which is a key process during anaerobic digestion. To expose possible bottlenecks, specific activities of the key enzymes of acidification, such as acetate kinase (Ack, 0.23-0.99 U mg(-1) protein), butyrate kinase (Buk, < 0.03 U mg(-1) protein) and butyryl-CoA:acetate-CoA transferase (But, 3.24-7.64 U mg(-1) protein), were determined in cell free extracts of biogas reactor content from three different biogas reactors. Furthermore, the detection of Ack was successful via Western blot analysis. Quantification of corresponding functional genes encoding Buk (buk) and But (but) was not feasible, although an amplification was possible. Thus, phylogenetic trees were constructed based on respective gene fragments. Four new clades of possible butyrate-producing bacteria were postulated, as well as bacteria of the genera Roseburia or Clostridium identified. The low Buk activity was in contrast to the high specific But activity in the analysed samples. Butyrate formation via Buk activity does barely occur in the investigated biogas reactor. Specific enzyme activities (Ack, Buk and But) in samples drawn from three different biogas reactors correlated with ammonia and ammonium concentrations (NH₃ and NH₄(+)-N), and a negative dependency can be postulated. Thus, high concentrations of NH₃ and NH₄(+)-N may lead to a bottleneck in acidogenesis due to decreased specific acidogenic enzyme activities. PMID:26086956

  5. Spectroscopic and structural characterization of reduced technetium species in acetate media

    SciTech Connect

    Mausolf, Edward; Poineau, Frederic; Droessler, Janelle; Czerwinski, Kenneth R.

    2011-11-17

    The reduction of ammonium pertechnetate by sodium borohydride in 0.1 M NaOH/glacial acetic acid has been studied. The reduction products (solids and solutions) have been characterized by UV-Visible spectroscopy, Scanning Electron Microscopy/Energy-dispersive X-ray emission spectroscopy (SEM/EDS), and X-ray absorption fine structure (XAFS) spectroscopy. UV-Visible spectra of the solution, after reduction, exhibit bands at 350 and 500 nm that have been attributed to the formation of polymeric Tc(IV) species. SEM/EDS on the solid (X-ray amorphous) indicates the absence of metallic Tc and the presence of oxygen. EXAFS measurements further indicate that the precipitate exhibits a [Tc({mu}-O){sub 2}Tc] core structure. XANES is consistent with the formation of Tc(III) and/or Tc(IV). Results infer that reduction of aqueous Tc(VII) by borohydride in the presence of acetic acid does not produce metallic Tc, but a mixture of various oxidation states of Tc near Tc(III) and Tc(IV).

  6. Feasibility of enhancing the DEnitrifying AMmonium OXidation (DEAMOX) process for nitrogen removal by seeding partial denitrification sludge.

    PubMed

    Cao, Shenbin; Peng, Yongzhen; Du, Rui; Wang, Shuying

    2016-04-01

    The recently proposed DEnitrifying AMmonium OXidation (DEAMOX) process combined anaerobic ammonia oxidation (ANAMMOX) with denitrification to convert nitrate to nitrite, which was a promising way for treating wastewater containing nitrate and ammonia. This study investigated the feasibility of establishing DEAMOX process by seeding partial denitrification sludge (NO3(-) → NO2(-)) using sodium acetate as an electron donor in a sequencing batch reactor. Results showed that the DEAMOX process was established successfully and operated stably in 114-days operation. The average effluent total nitrogen concentration was below 5 mg L(-1) and TN removal efficiency reached up to 97% at COD/NO3(-) ratio of 3.0 under initial NH4(+) concentration of 25 mg L(-1) and NO3(-) of 30 mg L(-1). It suggested that the presence of NO2(-) in the system supplied for ANAMMOX and the relatively long sludge retention time (SRT) for denitrifiers were attributed to commendable coexistence of ANAMMOX and denitrifying bacteria. PMID:26829308

  7. Ammonium as a sustainable proton shuttle in bioelectrochemical systems.

    PubMed

    Cord-Ruwisch, Ralf; Law, Yingyu; Cheng, Ka Yu

    2011-10-01

    This work examines a pH control method using ammonium (NH(4)(+)) as a sustainable proton shuttle in a CEM-equipped BES. Current generation was sustained by adding NH(3) or ammonium hydroxide (NH(4)OH) to the anolyte, controlling its pH at 7. Ammonium ion migration maintained the catholyte pH at approximately 9.25. Such NH(4)(+)/NH(3) migration accounted for 90±10% of the ionic flux in the BES. Reintroducing the volatilized NH(3) from the cathode into the anolyte maintained a suitable anolyte pH for sustained microbial-driven current generation. Hence, NH(4)(+)/NH(3) acted as a proton shuttle that is not consumed in the process. PMID:21865037

  8. Exposure to common quaternary ammonium disinfectants decreases fertility in mice

    PubMed Central

    Melin, Vanessa E.; Potineni, Haritha; Hunt, Patricia; Griswold, Jodi; Siems, Bill; Werre, Stephen R.; Hrubec, Terry C.

    2014-01-01

    Quaternary ammonium compounds (QACs) are antimicrobial disinfectants commonly used in commercial and household settings. Extensive use of QACs results in ubiquitous human exposure, yet reproductive toxicity has not been evaluated. Decreased reproductive performance in laboratory mice coincided with the introduction of a disinfectant containing both alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC). QACs were detected in caging material over a period of several months following cessation of disinfectant use. Breeding pairs exposed for six months to a QAC disinfectant exhibited decreases in fertility and fecundity: increased time to first litter, longer pregnancy intervals, fewer pups per litter and fewer pregnancies. Significant morbidity in near term dams was also observed. In summary, exposure to a common QAC disinfectant mixture significantly impaired reproductive health in mice. This study illustrates the importance of assessing mixture toxicity of commonly used products whose components have only been evaluated individually. PMID:25483128

  9. Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

    SciTech Connect

    Wang, Wei-Wei; Yao, Jia-Liang

    2010-11-15

    Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

  10. Aerosol isotopic ammonium signatures over the remote Atlantic Ocean

    NASA Astrophysics Data System (ADS)

    Lin, C. T.; Jickells, T. D.; Baker, A. R.; Marca, A.; Johnson, M. T.

    2016-05-01

    We report aerosol ammonium 15N signatures for samples collected from research cruises on the South Atlantic and Caribbean using a new high sensitivity method. We confirm a pattern of isotopic signals from generally light (δ15N -5 to -10‰), for aerosols with very low (<2  nmol m-3) ammonium concentrations from the remote high latitude ocean, to generally heavier values (δ15N +5 to +10‰), for aerosols collected in temperate and tropical latitudes and with higher ammonium concentrations (>2  nmol m-3). We discuss whether this reflects a mixing of aerosols from two end-members (polluted continental and remote marine emissions), or isotopic fractionation during aerosol transport.

  11. Effect of temperature on ammonium removal in Scenedesmus sp.

    PubMed

    Ruiz-Martínez, A; Serralta, J; Seco, A; Ferrer, J

    2015-09-01

    The effect of temperature on microalgal ammonium uptake was investigated by carrying out four batch experiments in which a mixed culture of microalgae, composed mainly of Scenedesmus sp., was cultivated under different temperatures within the usual temperature working range in Mediterranean climate (15-34 °C). Ammonium removal rates increased with temperature up to 26 °C and stabilized thereafter. Ratkowsky and Cardinal temperatures models successfully reproduced the experimental data. Optimum (31.3 °C), minimum (8.8 °C) and maximum (46.1 °C) temperatures for ammonium removal by Scenedesmus sp. under the studied conditions were obtained as model parameters. These temperature-related parameters constitute very useful information for designing and operating wastewater treatment systems using these microalgae. PMID:26027902

  12. Handling of Ammonium Nitrate Mother-Liquid Radiochemical Production - 13089

    SciTech Connect

    Zherebtsov, Alexander; Dvoeglazov, Konstantine; Volk, Vladimir; Zagumenov, Vladimir; Zverev, Dmitriy; Tinin, Vasiliy; Kozyrev, Anatoly; Shamin, Dladimir; Tvilenev, Konstantin

    2013-07-01

    The aim of the work is to develop a basic technology of decomposition of ammonium nitrate stock solutions produced in radiochemical enterprises engaged in the reprocessing of irradiated nuclear fuel and fabrication of fresh fuel. It was necessary to work out how to conduct a one-step thermal decomposition of ammonium nitrate, select and test the catalysts for this process and to prepare proposals for recycling condensation. Necessary accessories were added to a laboratory equipment installation decomposition of ammonium nitrate. It is tested several types of reducing agents and two types of catalyst to neutralize the nitrogen oxides. It is conducted testing of modes of the process to produce condensation, suitable for use in the conversion of a new technological scheme of production. It is studied the structure of the catalysts before and after their use in a laboratory setting. It is tested the selected catalyst in the optimal range for 48 hours of continuous operation. (authors)

  13. Ammonium perchlorate structure and dynamics at low temperatures

    NASA Astrophysics Data System (ADS)

    Prask, H. J.; Choi, C. S.; Chesser, N. J.; Rosasco, G. J.

    1988-04-01

    Single-crystal and powder neutron diffraction, coherent neutron inelastic scattering, and Raman spectroscopy have been used to study the low temperature structure and dynamics of ammonium perchlorate. No evidence for a phase transition is found. Based on analysis of thermal motion amplitudes and inelastic neutron-scattering data for ND4ClO4 a Raman-active B3g symmetry zone-center mode at 45 cm-1 is identified as a libration. Another Raman-active mode, B1g symmetry at 33 cm-1, and a previously unobserved Au symmetry mode at 12 cm-1, are inferred to have significant librational character at q=0. Comparison of these results with earlier incoherent neutron scattering results suggests that, because of the low activation energy of ammonium ions, classical jump reorientations strongly influence ammonium-ion sublattice dynamics even to temperatures as low as 20 K. Partial dispersion curves are also presented.

  14. Overview on mechanisms of acetic acid resistance in acetic acid bacteria.

    PubMed

    Wang, Bin; Shao, Yanchun; Chen, Fusheng

    2015-02-01

    Acetic acid bacteria (AAB) are a group of gram-negative or gram-variable bacteria which possess an obligate aerobic property with oxygen as the terminal electron acceptor, meanwhile transform ethanol and sugar to corresponding aldehydes, ketones and organic acids. Since the first genus Acetobacter of AAB was established in 1898, 16 AAB genera have been recorded so far. As the main producer of a world-wide condiment, vinegar, AAB have evolved an elegant adaptive system that enables them to survive and produce a high concentration of acetic acid. Some researches and reviews focused on mechanisms of acid resistance in enteric bacteria and made the mechanisms thoroughly understood, while a few investigations did in AAB. As the related technologies with proteome, transcriptome and genome were rapidly developed and applied to AAB research, some plausible mechanisms conferring acetic acid resistance in some AAB strains have been published. In this review, the related mechanisms of AAB against acetic acid with acetic acid assimilation, transportation systems, cell morphology and membrane compositions, adaptation response, and fermentation conditions will be described. Finally, a framework for future research for anti-acid AAB will be provided. PMID:25575804

  15. Steady state growth of E. Coli in low ammonium environment

    NASA Astrophysics Data System (ADS)

    Kim, Minsu; Deris, Barret; Zhang, Zhongge; Hwa, Terry

    2011-03-01

    Ammonium is the preferred nitrogen source for many microorganisms. In medium with low ammonium concentrations, enteric bacteria turn on the nitrogen responsive (ntr) genes to assimilate ammonium. Two proteins in E. coli, Glutamine synthetase (GS) and the Ammonium/methylammonium transporter AmtB play crucial roles in this regard. GS is the major ammonium assimilation enzyme below 1mM of NH4 + . AmtB is an inner membrane protein that transports NH4 + across the cell membrane against a concentration gradient. In order to study ammonium uptake at low NH4 + concentration at neutral pH, we developed a microfluidic flow chamber that maintains a homogenous nutrient environment during the course of exponential cell growth, even at very low concentration of nutrients. Cell growth can be accurately monitored using time-lapse microscopy. We followed steady state growth down to micro-molar range of NH4 + for the wild type and Δ amtB strains. The wild type strain is able to maintain the growth rate from 10mM down to a few uM of NH4 + , while the mutant exhibited reduced growth below ~ 20 ~uM of NH4 + . Simultaneous characterization of the expression levels of GS and AmtB using fluorescence reporters reveals that AmtB is turned on already at 1mM, but contributes to function only below ~ 30 ~uM in the wild-type. Down to ~ 20 ~uM of NH4 + , E.~coli can compensate the loss of AmtB by GS alone.

  16. Mutagenic activity of quaternary ammonium salt derivatives of carbohydrates.

    PubMed

    Dmochowska, Barbara; Sikora, Karol; Woziwodzka, Anna; Piosik, Jacek; Podgórska, Beata

    2016-01-01

    This paper presents a study on a series of quaternary ammonium salt (QAS) derivatives of glucopyranosides with an elongated hydrophobic hydrocarbon chain. The new N-[6-(β-D-glucopyranosyloxy)hexyl]ammonium bromides and their O-acetyl derivatives were analyzed via (1)H and (13)C NMR spectroscopy. The mutagenic activity of the newly synthesized QAS was investigated using two different techniques: The Vibrio harveyi luminescence assay and the Ames test. The obtained results support previous findings contesting QAS safety and indicate that QAS, specifically pyridinium derivatives, might be mutagenic. PMID:27559394

  17. Mutagenic activity of quaternary ammonium salt derivatives of carbohydrates

    PubMed Central

    Sikora, Karol; Woziwodzka, Anna; Piosik, Jacek; Podgórska, Beata

    2016-01-01

    Summary This paper presents a study on a series of quaternary ammonium salt (QAS) derivatives of glucopyranosides with an elongated hydrophobic hydrocarbon chain. The new N-[6-(β-D-glucopyranosyloxy)hexyl]ammonium bromides and their O-acetyl derivatives were analyzed via 1H and 13C NMR spectroscopy. The mutagenic activity of the newly synthesized QAS was investigated using two different techniques: The Vibrio harveyi luminescence assay and the Ames test. The obtained results support previous findings contesting QAS safety and indicate that QAS, specifically pyridinium derivatives, might be mutagenic. PMID:27559394

  18. A model of the spatial distribution of ammonium in precipitation

    SciTech Connect

    Liljestrand, H.M.

    1986-04-01

    The net acidity of precipitation depends on both acid and base contributions, with ammonia being one of the two major bases. A model of ammonium concentrations in precipitation is developed from estimates of the spatial and seasonal emission densities of NH/sub 3/ across the continental United States. Box models are used to determine the transport, reactions and distribution between gaseous and particulate phases. An acid-base scavenging model is developed to estimate area average ammonium concentrations in precipitation. Model predictions are compared with historical data.

  19. Tripropyl­ammonium trithio­cyanurate

    PubMed Central

    Yang, Yunxia

    2010-01-01

    In the title compound (systematic name: tripropyl­azanium 2,4,6-tris­ulfanyl­idene­cyclo­hexan-1-ide), (C3H7)3HN+·C3H2N3S3 −, one H atom of trithio­cyanuric acid is accepted by tripropyl­amine to form the ammonium ion. Coplanar trithio­cyanurate and tripropyl­ammonium ions [dihedral angle = 82.33 (8)°] form the salt, which is stabilised by various N—H⋯S and N—H⋯N contacts. PMID:21588990

  20. Metabolic Responses of Saccharomyces cerevisiae to Valine and Ammonium Pulses during Four-Stage Continuous Wine Fermentations

    PubMed Central

    Clement, T.; Perez, M.; Mouret, J. R.; Sanchez, I.; Sablayrolles, J. M.

    2013-01-01

    Nitrogen supplementation, which is widely used in winemaking to improve fermentation kinetics, also affects the products of fermentation, including volatile compounds. However, the mechanisms underlying the metabolic response of yeast to nitrogen additions remain unclear. We studied the consequences for Saccharomyces cerevisiae metabolism of valine and ammonium pulses during the stationary phase of four-stage continuous fermentation (FSCF). This culture technique provides cells at steady state similar to that of the stationary phase of batch wine fermentation. Thus, the FSCF device is an appropriate and reliable tool for individual analysis of the metabolic rerouting associated with nutrient additions, in isolation from the continuous evolution of the environment in batch processes. Nitrogen additions, irrespective of the nitrogen-containing compound added, substantially modified the formation of fermentation metabolites, including glycerol, succinate, isoamyl alcohol, propanol, and ethyl esters. This flux redistribution, fulfilling the requirements for precursors of amino acids, was consistent with increased protein synthesis resulting from increased nitrogen availability. Valine pulses, less efficient than ammonium addition in increasing the fermentation rate, were followed by a massive conversion of this amino acid in isobutanol and isobutyl acetate through the Ehrlich pathway. However, additional routes were involved in valine assimilation when added in stationary phase. Overall, we found that particular metabolic changes may be triggered according to the nature of the amino acid supplied, in addition to the common response. Both these shared and specific modifications should be considered when designing strategies to modulate the production of volatile compounds, a current challenge for winemakers. PMID:23417007

  1. Metabolic responses of Saccharomyces cerevisiae to valine and ammonium pulses during four-stage continuous wine fermentations.

    PubMed

    Clement, T; Perez, M; Mouret, J R; Sanchez, I; Sablayrolles, J M; Camarasa, C

    2013-04-01

    Nitrogen supplementation, which is widely used in winemaking to improve fermentation kinetics, also affects the products of fermentation, including volatile compounds. However, the mechanisms underlying the metabolic response of yeast to nitrogen additions remain unclear. We studied the consequences for Saccharomyces cerevisiae metabolism of valine and ammonium pulses during the stationary phase of four-stage continuous fermentation (FSCF). This culture technique provides cells at steady state similar to that of the stationary phase of batch wine fermentation. Thus, the FSCF device is an appropriate and reliable tool for individual analysis of the metabolic rerouting associated with nutrient additions, in isolation from the continuous evolution of the environment in batch processes. Nitrogen additions, irrespective of the nitrogen-containing compound added, substantially modified the formation of fermentation metabolites, including glycerol, succinate, isoamyl alcohol, propanol, and ethyl esters. This flux redistribution, fulfilling the requirements for precursors of amino acids, was consistent with increased protein synthesis resulting from increased nitrogen availability. Valine pulses, less efficient than ammonium addition in increasing the fermentation rate, were followed by a massive conversion of this amino acid in isobutanol and isobutyl acetate through the Ehrlich pathway. However, additional routes were involved in valine assimilation when added in stationary phase. Overall, we found that particular metabolic changes may be triggered according to the nature of the amino acid supplied, in addition to the common response. Both these shared and specific modifications should be considered when designing strategies to modulate the production of volatile compounds, a current challenge for winemakers. PMID:23417007

  2. [Degradation of oxytetracycline with ozonation in acetic acid solvent].

    PubMed

    Li, Shi-Yin; Li, Xiao-Rong; Zhu, Yi-Ping; Zhu, Jiang-Peng; Wang, Guo-Xiang

    2012-12-01

    Use acetic acid as the media of ozone degradation of oxytetracycline (OTC), and effects of the initial dosing ratio of ozone/OTC, ozone flow, free radical scavenger, metal ions on the removal rate of OTC were investigated respectively. The results showed that acetic acid had a high ozone stability and solubility. OTC had a high removal rate and degradation rate in acetic acid solution. With the increase of OTC dosage, the removal rate of OTC decreased in acetic acid. Removal rate of OTC was increased distinctly when ozone flow increased properly. It was also observed that free radical scavenger had a significantly negative effect on OTC ozonation degradation in acetic acid. Furthermore the main reactions of OTC ozone oxidation were direct oxidation and indirect oxidation in acetic acid. When Fe3+ and Co2+ were existent in acetic acid, the degradation of OTC was inhibited significantly. PMID:23379161

  3. Acetic acid removal from corn stover hydrolysate using ethyl acetate and the impact on Saccharomyces cerevisiae bioethanol fermentation.

    PubMed

    Aghazadeh, Mahdieh; Ladisch, Michael R; Engelberth, Abigail S

    2016-07-01

    Acetic acid is introduced into cellulose conversion processes as a consequence of composition of lignocellulose feedstocks, causing significant inhibition of adapted, genetically modified and wild-type S. cerevisiae in bioethanol fermentation. While adaptation or modification of yeast may reduce inhibition, the most effective approach is to remove the acetic acid prior to fermentation. This work addresses liquid-liquid extraction of acetic acid from biomass hydrolysate through a pathway that mitigates acetic acid inhibition while avoiding the negative effects of the extractant, which itself may exhibit inhibition. Candidate solvents were selected using simulation results from Aspen Plus™, based on their ability to extract acetic acid which was confirmed by experimentation. All solvents showed varying degrees of toxicity toward yeast, but the relative volatility of ethyl acetate enabled its use as simple vacuum evaporation could reduce small concentrations of aqueous ethyl acetate to minimally inhibitory levels. The toxicity threshold of ethyl acetate, in the presence of acetic acid, was found to be 10 g L(-1) . The fermentation was enhanced by extracting 90% of the acetic acid using ethyl acetate, followed by vacuum evaporation to remove 88% removal of residual ethyl acetate along with 10% of the broth. NRRL Y-1546 yeast was used to demonstrate a 13% increase in concentration, 14% in ethanol specific production rate, and 11% ethanol yield. This study demonstrated that extraction of acetic acid with ethyl acetate followed by evaporative removal of ethyl acetate from the raffinate phase has potential to significantly enhance ethanol fermentation in a corn stover bioethanol facility. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:929-937, 2016. PMID:27090191

  4. Preparation and characterization of superfine ammonium perchlorate (AP) crystals through ceramic membrane anti-solvent crystallization

    NASA Astrophysics Data System (ADS)

    Ma, Zhenye; Li, Cheng; Wu, Rujun; Chen, Rizhi; Gu, Zhenggui

    2009-10-01

    In this paper, a novel ceramic membrane anti-solvent crystallization (CMASC) method was proposed for the safe and rapid preparation ammonium perchlorate (AP) crystals, in which the acetone and ethyl acetate were chosen as solvent and anti-solvent, respectively. Comparing with the conventional liquid anti-solvent crystallization (LASC), CMASC which successfully introduces ceramic membrane with regular pore structure to the LASC as feeding medium, is favorable to control the rate of feeding rate and, therefore, to obtain size and morphology controllable AP. Several kinds of micro-sized AP particles with different morphology were obtained including polyhedral-like, quadrate-like to rod-like. The effect of processing parameters on the crystal size and shape of AP crystals such as volume ratio of anti-solvent to solvent, feeding pressure and crystallization temperature were investigated. It is found that higher volume ratio of anti-solvent to solvent, higher feeding pressure and higher temperature result in smaller particle size. Scaning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the resulting AP crystals. The nucleation and growth kinetic of the resulting AP crystals were also discussed.

  5. Temperature dependence of ion transport in dilute tetrabutylammonium triflate-acetate solutions and self-diffusion in pure acetate liquids.

    PubMed

    Bopege, Dharshani N; Petrowsky, Matt; Fleshman, Allison M; Frech, Roger; Johnson, Matthew B

    2012-01-12

    Conductivities and static dielectric constants for 0.0055 M tetrabutylammonium trifluoromethanesulfonate in n-butyl acetate, n-pentyl acetate, n-hexyl acetate, n-octyl acetate, and n-decyl acetate have been collected over the temperature range of 0-80 °C. Self-diffusion coefficients and static dielectric constants of pure acetates were obtained over the same temperature range. Both temperature-dependent diffusion coefficients and ionic conductivities of these pure acetates and dilute acetate solutions can be accurately described by the compensated Arrhenius formalism. Activation energies were calculated from compensated Arrhenius plots for both conductivity and diffusion data. Activation energies are higher for conductivity data of 0.0055 M TbaTf-acetates compared to diffusion data of pure acetates. The plot of the exponential prefactor versus the dielectric constant yields a single master curve for both conductivity and diffusion data. These data support the argument that mass and charge transport are thermally activated processes in the acetates, as previously observed in alcohol-based electrolytes. PMID:22145961

  6. Lead acetate may cause erectile dysfunction by modulating NO/cGMP pathway in rat corpus cavernosum.

    PubMed

    Senbel, Amira M; Helmy, Mai M

    2013-10-01

    Despite the fact that metal toxicity has been widely reported in industrial toxicological studies, very little has been reported about the effect of lead exposure on erectile function. This study investigated the effect of lead on erectile function in rats and aimed to preliminarily test the mechanisms by which it might affect erection. Rats were injected with lead acetate (0.25-2 mg/kg) intraperitoneally for 21 days. Intracavernosal pressure/mean arterial pressure (ICP/MAP) next to nerve stimulation; nitrite/nitrate; malonaldehyde; and reduced glutathione levels and superoxide dismutase activity in the corpus cavernosum, kidney, and brain were measured in addition to creatinine, urea, and testosterone. For acute studies, rats were injected intravenously with lead acetate, and then ICP/MAP was recorded for 45 min. Subacute treatment significantly reduced erection with significant elevation of malonaldehyde and reduction of nitrite/nitrate levels in the corpus cavernosum. In acute studies, lead (2 and 5 mg/kg) reduced neurogenic erections by 28.42 ± 3.76 and 96.84 ± 8.52%, respectively, an effect that was masked in the presence of NG-nitro-L-arginine, tetraethyl ammonium, or methylene blue, but not zinc protoporphyrine, and reversed by vitamin C and partially by sildenafil. Lead acetate may inhibit the erectile process in rats. Besides its prooxidant effect and consequent inactivation of nitric oxide, lead may negatively modulate the action of nitric oxide on guanylate cyclase and potassium channels. PMID:23979109

  7. Chemoselectivities in acetalization, thioacetalization, oxathioacetalization and azathioacetalization.

    PubMed

    Roy, Ram Kinkar; Bagaria, Priyanka; Naik, Sarala; Kavala, Veerababurao; Patel, Bhisma K

    2006-02-16

    In the present article (experimental as well theoretical) the relative yields of cyclic (O,O), (S,S), (S,O), and (S,N) acetals, formed from p-(NO2)C6H4CHO and p-(OH)C6H4CHO, are compared. Atomic charges, global electrophilicity descriptor (w) [as proposed by Parr et al., J. Am. Chem. Soc. 1999, 121, 1922] and hard-soft acid-base concept of Pearson (J. Am. Chem. Soc. 1963, 85, 3533) are used to explain the experimental observations. Although the w values can explain the yields, charge and local softness values of the interacting sites explain the plausible reaction mechanism. The bisnucleophiles chosen for acetalization are CH2(OH)-CH2(OH) (glycol), CH2(SH)-CH2(SH) (dithiol), CH2(OH)-CH2(SH) (oxathiol) and CH2(SH)-CH2(NH2) (azathiol). For p-(NO2)C6H4CHO, the experimental yield of cyclic acetals were found to follow the trend as (S,N) > (S,O) > (O,O) > (S,S), which is also supported by theoretical explanation based on the w values and applying the concept of hard-hard (i.e., charge-controlled) and soft-soft (i.e., orbital-controlled) interaction between the interacting sites of the substrates (i.e., aldehydes) and the reactants (bisnucleophiles). Similarly, for p-(OH)C6H4CHO the relative yields of cyclic acetals follow the trend (S,N) approximately (S,S) > (S,O) > (O,O). It is argued that the attack on C(CHO) (i.e., C-atom of the CHO group) in p-(NO2)C6H4CHO by O(OH) (i.e., O-atom of OH group) or N(NH2) (i.e., N-atom of NH2 group) is mainly charge-controlled but the attack on C(CHO) in p-(OH)C6H4CHO) by S(SH) (i.e., S-atom of SH group) is orbital-controlled. PMID:16466254

  8. Immobilization of quaternary ammonium salts on grafting particle polystyrene/SiO 2 and preliminary study of application performance

    NASA Astrophysics Data System (ADS)

    Gao, Baojiao; Qi, Changsheng; Liu, Qing

    2008-04-01

    Polystyrene (PSt) was grafted on the surface of silica gel particles in the manner of "grafting from" in a solution polymerization system, and grafting particles PSt/SiO 2 was obtained. The chloromethylation reaction of the grafted polystyrene was performed using a novel chloromethylation reagent, 1,4-bis(chloromethyoxy)butane which is un-carcinogenic, and grafting particles CMPS/SiO 2 was gained. Subsequently, grafted CMPS was quaternized (denoted as QPS) using tertiary amine, and finally functional composite-type particles QPS/SiO 2, on which quaternary ammonium groups were immobilized, were prepared. The catalysis activity of the particle QPS/SiO 2 as a triphase catalyst in phase-transfer catalysis systems and its antibacterial activity as a water-insoluble antibacterial material were studied preliminarily. The experimental results show that the particle QPS/SiO 2 exhibits higher catalysis activity as a triphase catalyst for the reaction between benzyl chloride in organic phase and sodium acetate in aqueous phase to form benzyl acetate, and under a mild condition of 60 °C for 7 h of reaction time a conversion of 66% for benzyl chloride can be obtained. The particle QPS/SiO 2 has high antibacterial activity as a water-insoluble antibacterial material against Escherichia coli ( E. coli).

  9. Quaternary Ammonium Disinfectant Issues Encountered in an Environmental Services Department.

    PubMed

    Boyce, John M; Sullivan, Linda; Booker, Arica; Baker, James

    2016-03-01

    We identified several factors affecting the use of quaternary ammonium-based (Quat) disinfectant in our facility. Microfiber wipers, cotton towels, and 1 of 2 types of disposable wipes soaked in a Quat disinfectant revealed significant binding of the disinfectant. Concentrations of Quat delivered by automated disinfectant dispensers varied widely. PMID:26821275

  10. Two types of ammonium uncoupling in pea chloroplasts.

    PubMed

    Opanasenko, V K; Vasyukhina, L A; Naydov, I A

    2010-06-01

    The effect of ammonium on ATP synthesis, electron transfer, and light-induced uptake of hydrogen ions in pea chloroplasts was studied. It is shown that the dependence of these reactions on ammonium concentration could be due to effects of two different uncoupling processes. The first process is induced by low ammonium concentrations (<0.2 mM); the second one is observed in the NH(4)Cl concentration interval of 0.5-5.0 mM. The first type of uncoupling is stimulated by palmitic acid or by N,N'-dicyclohexylcarbodiimide, while the second is stimulated by chloroplast thylakoid swelling caused by energy-dependent osmotic gradients. In the presence of the fluorescent dye sulforhodamine B, which does not penetrate through the cell membrane, this swelling causes the dye to enter the lumens. It is supposed that ammonium activates two different routes of cation leakage from the lumen. The first route involves channel proteins, while the second is a mechanosensitive pore that opens in response to osmotic gradients. PMID:20636271

  11. Growth rate dispersion of small ammonium alum crystals

    NASA Astrophysics Data System (ADS)

    Teodossiev, N.

    1987-01-01

    The growth rates of small (below 60 μm) and large (about 1 mm) crystals of ammonium alum was measured during batch crystallization from aqueous solutions. The growth rate distribution of small crystals is close to normal. With increasing supersaturation the growth rate of the large crystals increases more rapidly than that of small crystals.

  12. 40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., pulp 0.20 Beet, sugar, molasses 5.0 Beet, sugar, roots 0.9 Beet, sugar, tops (leaves) 1.5 Bushberry... residues of the herbicide glufosinate-ammonium (butanoic acid, 2-amino-4-(hydroxymethylphosphinyl...-propionic acid, expressed as 2-amino-4-(hydroxymethylphosphinyl)butanoic acid equivalents, in or on...

  13. 40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., roots 0.9 Beet, sugar, tops (leaves) 1.5 Bushberry subgroup 13B 0.15 Canola, meal 1.1 Canola, seed 0.40... is to be determined by measuring only the sum of glufosinate ammonium, 2-amino-4... 2-amino-4-(hydroxymethylphosphinyl)butanoic acid, in or on the commodity. Commodity Parts...

  14. Residual Particle Sizes of Evaporating Droplets: Ammonium Sulfate and Aldehydes

    NASA Astrophysics Data System (ADS)

    Sedehi, N.; Galloway, M. M.; De Haan, D. O.

    2012-12-01

    The reactions of carbonyls like glyoxal, methylglyoxal, and glycolaldehyde, with ammonium salts have been proposed as significant sources of atmospheric organic aerosol. Aerosol containing these compounds was generated in the laboratory using the Vibrating Orifice Aerosol Generator (VOAG). The particles were completely dried before they were measured using a SMPS system. The nonvolatile fraction of the resulting aerosol was measured. The drying times were varied between two and twenty minutes, and for ammonium sulfate and glyoxal reactions, minimum residual particle sizes were reached after 3.5 minutes. Reactions of glyoxal, glycolaldehyde, and methylglyoxal with ammonium sulfate appeared to have lower non-volatile fractions remaining at higher starting concentrations, suggesting that a constant 'excess volume,' likely water, was present in the residual particles that could not be evaporated even after 20 minutes of drying. These excess volumes were not observed in our previous experiments with aldehydes but no ammonium sulfate present. At the highest concentrations tested (100 uM), non-volatile fractions of aldehydes present in residual particles were 16 (±17) %, 41 (±28) %, and 17(±32) % for glyoxal, glycolaldehyde, and methylglyoxal, respectively.

  15. Producing ammonium sulfate from flue gas desulfurization by-products

    USGS Publications Warehouse

    Chou, I.-Ming; Bruinius, J.A.; Benig, V.; Chou, S.-F.J.; Carty, R.H.

    2005-01-01

    Emission control technologies using flue gas desulfurization (FGD) have been widely adopted by utilities burning high-sulfur fuels. However, these technologies require additional equipment, greater operating expenses, and increased costs for landfill disposal of the solid by-products produced. The financial burdens would be reduced if successful high-volume commercial applications of the FGD solid by-products were developed. In this study, the technical feasibility of producing ammonium sulfate from FGD residues by allowing it to react with ammonium carbonate in an aqueous solution was preliminarily assessed. Reaction temperatures of 60, 70, and 80??C and residence times of 4 and 6 hours were tested to determine the optimal conversion condition and final product evaluations. High yields (up to 83%) of ammonium sulfate with up to 99% purity were achieved under relatively mild conditions. The optimal conversion condition was observed at 60??C and a 4-hour residence time. The results of this study indicate the technical feasibility of producing ammonium sulfate fertilizer from an FGD by-product. Copyright ?? Taylor & Francis Inc.

  16. Biochemistry of growth inhibition by ammonium ions in mammalian cells

    SciTech Connect

    Ryll, T.; Valley, U.; Wagner, R. . Cell Culture Techniques Dept.)

    1994-06-20

    The intracellular pool of UDP-N-acetylglucosamine and UDP-N-acetylgalactosamine has been shown to act as a central target during the inhibitory action of ammonium ions in vitro cultivated mammalian cell cultures. This pool has been demonstrated to be elevated at the end of a batch cultivation and very quickly as a response to exogenously applied ammonium chloride by using four different cell lines (hybridoma, BHK, CHO, and Ltk-929). The amount of enlarged UDP aminohexoses is correlated to the inhibitor concentration and additionally dependent on the cell line. The formation of the UDP sugars is associated with a transient reduction of the UTP pool. Moreover, the quick formation of UDP-GNAC is strictly dependent on the presence of, glucose and ammonium. Both metabolites act as biochemical precursors. Additionally, the formation of UDP-GNAc after ammonium application has been shown to increase with an elevated cultivation pH and to be independent of the inhibition of transcription and translation processes. The intracellular amount of UDP-GNAc correlates with the level of growth inhibition in mammalian cell lines.

  17. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ferric ammonium citrate. 184.1296 Section 184.1296 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  18. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ferric ammonium citrate. 184.1296 Section 184.1296 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS...

  19. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Ferric ammonium citrate. 184.1296 Section 184.1296 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  20. 21 CFR 184.1296 - Ferric ammonium citrate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Ferric ammonium citrate. 184.1296 Section 184.1296 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed...

  1. GRANULATION OF COMPLEX FERTILIZERS CONTAINING AMMONIUM SULFATE BY MELT TECHNOLOGY

    EPA Science Inventory

    A novel process was developed for production of high analysis fertilizers in which large portions of the nutrients are derived from by-product and waste ammonium sulfate. The materials produced exhibit good physical and storage characteristics and are similar in grades to those n...

  2. Glufosinate and Ammonium Sulfate Inhibits Atrazine Degradation in Adapted Soils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The co-application of glufosinate with nitrogen fertilizers may alter atrazine co-metabolism, thereby extending the herbicide’s residual weed control in adapted soils. The objective of this study was to assess the effects of glufosinate, ammonium sulfate, and the combination of glufosinate and ammo...

  3. Salmonella enterica Strains with Reduced Susceptibility to Quarternary Ammonium Compounds

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Background: Salmonella spp. are responsible for 76 million illnesses per year in the U.S. Quaternary ammonium compounds (QAC) are commonly used antimicrobial agents. Reduced susceptibility to these compounds by a broad spectrum of organisms is a concern. Methods: Salmonella enterica strains with r...

  4. Weed control efficacy with ammonium nonanoate for organic vegetable production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Precision application of herbicides is important to vegetable producers because of the limited number of herbicides available and the potential for crop injury. Racer® (ammonium nonanoate) is a contact herbicide labeled for food use and is now labeled as a bio-herbicide for organically grown food c...

  5. Aqueous ammonia and ammonium chloride hydrates: Principal infrared spectra

    NASA Astrophysics Data System (ADS)

    Max, Jean-Joseph; Chapados, Camille

    2013-08-01

    The infrared (IR) spectra of aqueous ammonia (NH3) and aqueous ammonium chloride (NH4Cl) were recorded by attenuated total reflectance to obtain their molecular organizations. Factor analysis (FA) of the spectra revealed two hydrates for each species: (NH3)2ṡH2O and NH3ṡ3H2O; NH·HO; and (NH4+,Cl)·3HO, respectively. The hydrate spectra and species abundances were obtained as a function of total concentrations. From this the equilibrium equation between the two ammonia hydrates was determined: 2[(NH)2·HO]+5(HO)2⇌4[NH·3HO] with its equilibrium constant Kα = (2.3 ± 0.6) × 10-5 L3 mol-3. Similarly, for the two ammonium chloride hydrates the equation is 2[(NHCl)2·HO]+5(HO)2⇌4[NHCl·3HO] with its equilibrium constant: Kβ = (4 ± 1) × 10-7 L3 mol-3. Band simulations of the hydrate spectra were compared to that of pure liquid water and parent molecules. For aqueous ammonium chloride solutions the water and all ammonium hydrate bands are slightly displaced from that of pure water and pure ammonium chloride, respectively. However, for ammonia hydrates the situation is different: compared to the gas situation the hydrate water bands have similar displacements as that of pure liquid water; the ammonia deformation bands are also little displaced but the stretching bands are strongly red shifted. These shifts, which are even greater than that in pure liquid water, are attributed to strong hydrogen bonding situations: water-H with N-ammonia and ammonia-H with O-water. This explains the high solubility of ammonia in water. The comparison between the spectra of aqueous ammonium chloride and ammonia hydrates indicates that ammonium ion is not present in aqueous ammonia from 11.3 M down to at least our detection limit of 3 mM NH3.

  6. Sphingolipids contribute to acetic acid resistance in Zygosaccharomyces bailii.

    PubMed

    Lindahl, Lina; Genheden, Samuel; Eriksson, Leif A; Olsson, Lisbeth; Bettiga, Maurizio

    2016-04-01

    Lignocellulosic raw material plays a crucial role in the development of sustainable processes for the production of fuels and chemicals. Weak acids such as acetic acid and formic acid are troublesome inhibitors restricting efficient microbial conversion of the biomass to desired products. To improve our understanding of weak acid inhibition and to identify engineering strategies to reduce acetic acid toxicity, the highly acetic-acid-tolerant yeast Zygosaccharomyces bailii was studied. The impact of acetic acid membrane permeability on acetic acid tolerance in Z. bailii was investigated with particular focus on how the previously demonstrated high sphingolipid content in the plasma membrane influences acetic acid tolerance and membrane permeability. Through molecular dynamics simulations, we concluded that membranes with a high content of sphingolipids are thicker and more dense, increasing the free energy barrier for the permeation of acetic acid through the membrane. Z. bailii cultured with the drug myriocin, known to decrease cellular sphingo-lipid levels, exhibited significant growth inhibition in the presence of acetic acid, while growth in medium without acetic acid was unaffected by the myriocin addition. Furthermore, following an acetic acid pulse, the intracellular pH decreased more in myriocin-treated cells than in control cells. This indicates a higher inflow rate of acetic acid and confirms that the reduction in growth of cells cultured with myriocin in the medium with acetic acid was due to an increase in membrane permeability, thereby demonstrating the importance of a high fraction of sphingolipids in the membrane of Z. bailii to facilitate acetic acid resistance; a property potentially transferable to desired production organisms suffering from weak acid stress. PMID:26416641

  7. Structure, hydrogen bonding and thermal expansion of ammonium carbonate monohydrate.

    PubMed

    Fortes, A Dominic; Wood, Ian G; Alfè, Dario; Hernández, Eduardo R; Gutmann, Matthias J; Sparkes, Hazel A

    2014-12-01

    We have determined the crystal structure of ammonium carbonate monohydrate, (NH4)2CO3·H2O, using Laue single-crystal diffraction methods with pulsed neutron radiation. The crystal is orthorhombic, space group Pnma (Z = 4), with unit-cell dimensions a = 12.047 (3), b = 4.453 (1), c = 11.023 (3) Å and V = 591.3 (3) Å(3) [ρcalc = 1281.8 (7) kg m(-3)] at 10 K. The single-crystal data collected at 10 and 100 K are complemented by X-ray powder diffraction data measured from 245 to 273 K, Raman spectra measured from 80 to 263 K and an athermal zero-pressure calculation of the electronic structure and phonon spectrum carried out using density functional theory (DFT). We find no evidence of a phase transition between 10 and 273 K; above 273 K, however, the title compound transforms first to ammonium sesquicarbonate monohydrate and subsequently to ammonium bicarbonate. The crystallographic and spectroscopic data and the calculations reveal a quite strongly hydrogen-bonded structure (EHB ≃ 30-40 kJ mol(-1)), on the basis of H...O bond lengths and the topology of the electron density at the bond critical points, in which there is no free rotation of the ammonium cation at any temperature. The barrier to free rotation of the ammonium ions is estimated from the observed librational frequency to be ∼ 36 kJ mol(-1). The c-axis exhibits negative thermal expansion, but the thermal expansion behaviour of the a and b axes is ormal. PMID:25449618

  8. Structure, hydrogen bonding and thermal expansion of ammonium carbonate monohydrate

    PubMed Central

    Fortes, A. Dominic; Wood, Ian G.; Alfè, Dario; Hernández, Eduardo R.; Gutmann, Matthias J.; Sparkes, Hazel A.

    2014-01-01

    We have determined the crystal structure of ammonium carbonate monohydrate, (NH4)2CO3·H2O, using Laue single-crystal diffraction methods with pulsed neutron radiation. The crystal is orthorhombic, space group Pnma (Z = 4), with unit-cell dimensions a = 12.047 (3), b = 4.453 (1), c = 11.023 (3) Å and V = 591.3 (3) Å3 [ρcalc = 1281.8 (7) kg m−3] at 10 K. The single-crystal data collected at 10 and 100 K are complemented by X-ray powder diffraction data measured from 245 to 273 K, Raman spectra measured from 80 to 263 K and an athermal zero-pressure calculation of the electronic structure and phonon spectrum carried out using density functional theory (DFT). We find no evidence of a phase transition between 10 and 273 K; above 273 K, however, the title compound transforms first to ammonium sesquicarbonate monohydrate and subsequently to ammonium bicarbonate. The crystallographic and spectroscopic data and the calculations reveal a quite strongly hydrogen-bonded structure (E HB ≃ 30–40 kJ mol−1), on the basis of H⋯O bond lengths and the topology of the electron density at the bond critical points, in which there is no free rotation of the ammonium cation at any temperature. The barrier to free rotation of the ammonium ions is estimated from the observed librational frequency to be ∼ 36 kJ mol−1. The c-axis exhibits negative thermal expansion, but the thermal expansion behaviour of the a and b axes is ormal. PMID:25449618

  9. Immunotoxicity of trenbolone acetate in Japanese quail

    USGS Publications Warehouse

    Quinn, M.J.; McKernan, M.; Lavoie, E.T.; Ottinger, M.A.

    2007-01-01

    Trenbolone acetate is a synthetic androgen that is currently used as a growth promoter in many meat-exporting countries. Despite industry laboratories classifying trenbolone as nonteratogenic, data showed that embryonic exposure to this androgenic chemical altered development of the immune system in Japanese quail. Trenbolone is lipophilic, persistent, and released into the environment in manure used as soil fertilizer. This is the first study to date to assess this chemical's immunotoxic effects in an avian species. A one-time injection of trenbolone into yolks was administered to mimic maternal deposition, and subsequent effects on the development and function of the immune system were determined in chicks and adults. Development of the bursa of Fabricius, an organ responsible for development of the humoral arm of the immune system, was disrupted, as indicated by lower masse, and smaller and fewer follicles at day 1 of hatch. Morphological differences in the bursas persisted in adults, although no differences in either two measures of immune function were observed. Total numbers of circulating leukocytes were reduced and heterophil-lymphocyte ratios were elevated in chicks but not adults. This study shows that trenbolone acetate is teratogenic and immunotoxic in Japanese quail, and provides evidence that the quail immune system may be fairly resilient to embryonic endocrine-disrupting chemical-induced alterations following no further exposure posthatch.

  10. Phytogenic biosynthesis and emission of methyl acetate.

    PubMed

    Jardine, Kolby; Wegener, Frederik; Abrell, Leif; van Haren, Joost; Werner, Christiane

    2014-02-01

    Acetylation of plant metabolites fundamentally changes their volatility, solubility and activity as semiochemicals. Here we present a new technique termed dynamic (13) C-pulse chasing to track the fate of C1-3 carbon atoms of pyruvate into the biosynthesis and emission of methyl acetate (MA) and CO2 . (13) C-labelling of MA and CO2 branch emissions respond within minutes to changes in (13) C-positionally labelled pyruvate solutions fed through the transpiration stream. Strong (13) C-labelling of MA emissions occurred only under pyruvate-2-(13) C and pyruvate-2,3-(13) C feeding, but not pyruvate-1-(13) C feeding. In contrast, strong (13) CO2 emissions were only observed under pyruvate-1-(13) C feeding. These results demonstrate that MA (and other volatile and non-volatile metabolites) derive from the C2,3 atoms of pyruvate while the C1 atom undergoes decarboxylation. The latter is a non-mitochondrial source of CO2 in the light generally not considered in studies of CO2 sources and sinks. Within a tropical rainforest mesocosm, we also observed atmospheric concentrations of MA up to 0.6 ppbv that tracked light and temperature conditions. Moreover, signals partially attributed to MA were observed in ambient air within and above a tropical rainforest in the Amazon. Our study highlights the potential importance of acetyl coenzyme A (CoA) biosynthesis as a source of acetate esters and CO2 to the atmosphere. PMID:23862653

  11. Determination of diethanolamine or N-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters.

    PubMed

    Bord, N; Crétier, G; Rocca, J-L; Bailly, C; Souchez, J-P

    2004-09-01

    Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively. PMID:15338092

  12. 40 CFR 721.9075 - Quaternary ammonium salt of fluorinated alkylaryl amide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Quaternary ammonium salt of... New Uses for Specific Chemical Substances § 721.9075 Quaternary ammonium salt of fluorinated alkylaryl... identified generically as quaternary ammonium salt of fluorinated alkylaryl amide (PMN No. P-92-688)...

  13. 40 CFR 721.9075 - Quaternary ammonium salt of fluorinated alkylaryl amide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Quaternary ammonium salt of... New Uses for Specific Chemical Substances § 721.9075 Quaternary ammonium salt of fluorinated alkylaryl... identified generically as quaternary ammonium salt of fluorinated alkylaryl amide (PMN No. P-92-688)...

  14. 40 CFR 721.10100 - Dialkyl dimethyl ammonium carbonate (2:1) (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate (2... Specific Chemical Substances § 721.10100 Dialkyl dimethyl ammonium carbonate (2:1) (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (2:1) (PMN P-03-716) is subject to reporting under...

  15. 40 CFR 721.10479 - Quaternary ammonium compounds, tris(hydrogenated tallow alkyl)methyl, chlorides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Quaternary ammonium compounds, tris... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10479 Quaternary ammonium compounds... subject to reporting. (1) The chemical substance identified as quaternary ammonium compounds,...

  16. 40 CFR 721.10479 - Quaternary ammonium compounds, tris(hydrogenated tallow alkyl)methyl, chlorides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Quaternary ammonium compounds, tris... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10479 Quaternary ammonium compounds... subject to reporting. (1) The chemical substance identified as quaternary ammonium compounds,...

  17. 40 CFR 721.10342 - Quaternary ammonium compounds, fatty alkyl dialkyl hydroxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Quaternary ammonium compounds, fatty... Significant New Uses for Specific Chemical Substances § 721.10342 Quaternary ammonium compounds, fatty alkyl... chemical substance identified generically as quaternary ammonium compounds, fatty alkyl dialkyl...

  18. 40 CFR 721.10342 - Quaternary ammonium compounds, fatty alkyl dialkyl hydroxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Quaternary ammonium compounds, fatty... Significant New Uses for Specific Chemical Substances § 721.10342 Quaternary ammonium compounds, fatty alkyl... chemical substance identified generically as quaternary ammonium compounds, fatty alkyl dialkyl...

  19. 40 CFR 721.10342 - Quaternary ammonium compounds, fatty alkyl dialkyl hydroxide (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Quaternary ammonium compounds, fatty... Significant New Uses for Specific Chemical Substances § 721.10342 Quaternary ammonium compounds, fatty alkyl... chemical substance identified generically as quaternary ammonium compounds, fatty alkyl dialkyl...

  20. 40 CFR 721.10443 - Ethoxylated alkylphenol sulfate, ammonium salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., ammonium salt (generic). 721.10443 Section 721.10443 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.10443 Ethoxylated alkylphenol sulfate, ammonium salt... identified generically as ethoxylated alkylphenol sulfate, ammonium salt (PMN P-01-470) is subject...