Science.gov

Sample records for 64-bit digital optical

  1. Design and implementation of low power clock gated 64-bit ALU on ultra scale FPGA

    NASA Astrophysics Data System (ADS)

    Gupta, Ashutosh; Murgai, Shruti; Gulati, Anmol; Kumar, Pradeep

    2016-03-01

    64-bit energy efficient Arithmetic and Logic Unit using negative latch based clock gating technique is designed in this paper. The 64-bit ALU is designed using multiplexer based full adder cell. We have designed a 64-bit ALU with a gated clock. We have used negative latch based circuit for generating gated clock. This gated clock is used to control the multiplexer based 64-bit ALU. The circuit has been synthesized on kintex FPGA through Xilinx ISE Design Suite 14.7 using 28 nm technology in Verilog HDL. The circuit has been simulated on Modelsim 10.3c. The design is verified using System Verilog on QuestaSim in UVM environment. We have achieved 74.07%, 92. 93% and 95.53% reduction in total clock power, 89.73%, 91.35% and 92.85% reduction in I/Os power, 67.14%, 62.84% and 74.34% reduction in dynamic power and 25.47%, 29.05% and 46.13% reduction in total supply power at 20 MHz, 200 MHz and 2 GHz frequency respectively. The power has been calculated using XPower Analyzer tool of Xilinx ISE Design Suite 14.3.

  2. Digital optical conversion module

    DOEpatents

    Kotter, Dale K.; Rankin, Richard A.

    1991-02-26

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

  3. Digital optical conversion module

    DOEpatents

    Kotter, D.K.; Rankin, R.A.

    1988-07-19

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  4. Supporting 64-bit global indices in Epetra and other Trilinos packages :

    SciTech Connect

    Jhurani, Chetan; Austin, Travis M.; Heroux, Michael Allen; Willenbring, James Michael

    2013-06-01

    The Trilinos Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries within an object-oriented framework. It is intended for large-scale, complex multiphysics engineering and scientific applications [2, 4, 3]. Epetra is one of its basic packages. It provides serial and parallel linear algebra capabilities. Before Trilinos version 11.0, released in 2012, Epetra used the C++ int data-type for storing global and local indices for degrees of freedom (DOFs). Since int is typically 32-bit, this limited the largest problem size to be smaller than approximately two billion DOFs. This was true even if a distributed memory machine could handle larger problems. We have added optional support for C++ long long data-type, which is at least 64-bit wide, for global indices. To save memory, maintain the speed of memory-bound operations, and reduce further changes to the code, the local indices are still 32-bit. We document the changes required to achieve this feature and how the new functionality can be used. We also report on the lessons learned in modifying a mature and popular package from various perspectives design goals, backward compatibility, engineering decisions, C++ language features, effects on existing users and other packages, and build integration.

  5. Optical watthour meter digitizer

    SciTech Connect

    Andrews, W.H.

    1980-10-01

    As concern about energy conservation and energy-use efficiency increases, a simple and inexpensive instrument that would provide accurate, reliable and high-resolution data on electrical energy usage should find widespread application in research and industrial facilities. An instrument that would also provide one or more outputs compatible with a wide range of digital data acquisition systems would be especially appropriate, since the use of automatic data logging equipment is now common, even in small-scale and low-budget operations. An optical watthour meter digitizer was developed which meets these criteria. Based on the induction-type watthour meter, the digitizer provides an output pulse for a fixed amount of energy use. The digitizer senses the motion of the rotor disc of the meter by optically detecting passage of a nonreflective area painted on the underside of the disc. The passage of such area initiates a logic-compatible output pulse that can be used to measure power or energy usage in a variety of ways. The accuracy of the measurement is determined by the watthour meter. The resolution of the measurement is determined by the K/sub h/ constant (in watthours per revolution) of the meter and the number of equally spaced targets painted on the disc. The resolution of this device can be as small as a fraction of a watthour; the resolution of the manually read register on a watthour meter is typically a fraction of a kilowatthour. Several digitizers were fabricated, bench-tested, and installed in the field for long-term performance testing. All are performing satisfactorily.

  6. Digital Optical Control System

    NASA Astrophysics Data System (ADS)

    Jordan, David H.; Tipton, Charles A.; Christmann, Charles E.; Hochhausler, Nils P.

    1988-09-01

    We describe the digital optical control system (DOGS), a state-of-the-art controller for electrical feedback in an optical system. The need for a versatile optical controller arose from a number of unique experiments being performed by the Air Force Weapons Laboratory. These experiments use similar detectors and actuator-controlled mirrors, but the control requirements vary greatly. The experiments have in common a requirement for parallel control systems. The DOGS satisfies these needs by allowing several control systems to occupy a single chassis with one master controller. The architecture was designed to allow upward compatibility with future configurations. Combinations of off-the-shelf and custom boards are configured to meet the requirements of each experiment. The configuration described here was used to control piston error to X/80 at a wavelength of 0.51 Am. A peak sample rate of 8 kHz, yielding a closed loop bandwidth of 800 Hz, was achieved.

  7. Coherent Digital Holographic Adaptive Optics

    NASA Astrophysics Data System (ADS)

    Liu, Changgeng

    A new type of adaptive optics (AO) based on the principles of digital holography (DH) is proposed and developed for the use in wide-field and confocal retinal imaging. Digital holographic adaptive optics (DHAO) dispenses with the wavefront sensor and wavefront corrector of the conventional AO system. DH is an emergent imaging technology that gives direct numerical access to the phase of the optical field, thus allowing precise control and manipulation of the optical field. Incorporation of DH in an ophthalmic imaging system can lead to versatile imaging capabilities at substantially reduced complexity and cost of the instrument. A typical conventional AO system includes several critical hardware pieces: spatial light modulator, lenslet array, and a second CCD camera in addition to the camera for imaging. The proposed DHAO system replaces these hardware components with numerical processing for wavefront measurement and compensation of aberration through the principles of DH. (Abstract shortened by UMI.).

  8. Digital dual-rate burst-mode receiver for 10G and 1G coexistence in optical access networks

    NASA Astrophysics Data System (ADS)

    Delgado Mendinueta, José Manuel; Mitchell, John E.; Bayvel, Polina; Thomsen, Benn C.

    2011-07-01

    A digital dual-rate burst-mode receiver, intended to support 10 and 1 Gb/s coexistence in optical access networks, is proposed and experimentally characterized. The receiver employs a standard DC-coupled photoreceiver followed by a 20 GS/s digitizer and the detection of the packet presence and line-rate is implemented in the digital domain. A polyphase, 2 samples-per-bit digital signal processing algorithm is then used for efficient clock and data recovery of the 10/1.25 Gb/s packets. The receiver performance is characterized in terms of sensitivity and dynamic range under burst-mode operation for 10/1.25 Gb/s intensity modulated data in terms of both the packet error rate (PER) and the payload bit error rate (pBER). The impact of packet preamble lengths of 16, 32, 48, and 64 bits, at 10 Gb/s, on the receiver performance is investigated. We show that there is a trade-off between pBER and PER that is limited by electrical noise and digitizer clipping at low and high received powers, respectively, and that a 16/2-bit preamble at 10/1.25 Gb/s is sufficient to reliably detect packets at both line-rates over a burst-to-burst dynamic range of 14,5dB with a sensitivity of -18.5dBm at 10 Gb/s.

  9. Optical digital techniques

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Optical interface losses between transmitter-to-fiber interface, connector-to-connector interface, and fiber-to-receiver interface were studied. System effects such as pulse dispersion, risetimes of the sources and detectors, type of fibers used, output power of the sources, and detector sensitivity were considered. Data bus systems such as TEE, Star, and Hybrid were analyzed. The matter of single fiber versus bundle technologies for future avionics systems was considered. The existing data bus system on Space Shuttle was examined and an optical analog was derived for a fiber bundle system, along with the associated power margin. System tests were performed on a feasibility model of a 9-port Star data bus system including BER, star losses, connector losses, etc. The same system was subjected to EMI between the range of 200 Hz to 10 GHz at 20V/m levels. A lightning test was also performed which simulated the conditions similar to those on Space Shuttle. The data bus system was found to be EMI and lightning hard. It is concluded that an optical data bus system is feasible for shuttle orbiter type vehicles.

  10. Optical analog-to-digital converter

    DOEpatents

    Vawter, G. Allen; Raring, James; Skogen, Erik J.

    2009-07-21

    An optical analog-to-digital converter (ADC) is disclosed which converts an input optical analog signal to an output optical digital signal at a sampling rate defined by a sampling optical signal. Each bit of the digital representation is separately determined using an optical waveguide interferometer and an optical thresholding element. The interferometer uses the optical analog signal and the sampling optical signal to generate a sinusoidally-varying output signal using cross-phase-modulation (XPM) or a photocurrent generated from the optical analog signal. The sinusoidally-varying output signal is then digitized by the thresholding element, which includes a saturable absorber or at least one semiconductor optical amplifier, to form the optical digital signal which can be output either in parallel or serially.

  11. Digital Optical Sky Surveys

    SciTech Connect

    Kron, R.G.

    1995-08-01

    Cameras containing arrays of charge-coupled devices---or which are otherwise capable of sustained high data rates---enable optical sky surveys that compete in efficiency with photographic surveys in terms of area of sky covered per unit observing time. There are gains in performance as well as efficiency: stellar photometry is more straightforward because of the higher dynamic range of CCDs, and the low noise of CCDs allows narrow-band surveys to be undertaken. The small dead-time between exposures allows surveys for rapid variability as well as near-simultaneous color measurements. The most important new prospect may be real-time analysis for identification of sources changing either in position or in brightness. These gains come only after substantial investment in analysis tools and data handling and storage systems. To illustrate some of this potential, this review will focus on a number of sky surveys with CCDs that are either under way or in advanced implementation stages. {copyright} {ital 1995} {ital Astronomical} {ital Society} {ital of} {ital the} {ital Pacific}.

  12. Optical Digital Disks as Mass Storage Media.

    ERIC Educational Resources Information Center

    Boss, Richard W.

    1983-01-01

    Describes the optical digital disk, which stores machine-readable information in digitized form, and discusses their production, cost, present and future applications. The major companies currently active in the disk field are noted. (MBR)

  13. Novel digital optical tape recorder

    NASA Astrophysics Data System (ADS)

    Oakley, William S.

    1996-01-01

    A novel very high performance digital optical tape recorder is described. Linear tape motion at 4.2 meters per second and simultaneous writing of about 80 parallel bit tracks with a data density of three bits per micron per track enables a data rate of 1,000 Megabits per second, sufficient for a data rate of 100 megabytes per second with error correction. One micron track to track spacing gives a data capacity of one Terabyte (1,000 GB) in a single '3480' style tape cartridge shell. A single beam from a frequency doubled, laser diode pumped, solid state (2X- LDP-SS) laser is split into a multiplicity of like beams, each of which is then independently modulated at 12.5 MHz for recording.

  14. Digital Correlation By Optical Convolution/Correlation

    NASA Astrophysics Data System (ADS)

    Trimble, Joel; Casasent, David; Psaltis, Demetri; Caimi, Frank; Carlotto, Mark; Neft, Deborah

    1980-12-01

    Attention is given to various methods by which the accuracy achieveable and the dynamic range requirements of an optical computer can be enhanced. A new time position coding acousto-optic technique for optical residue arithmetic processing is presented and experimental demonstration is included. Major attention is given to the implementation of a correlator operating on digital or decimal encoded signals. Using a convolution description of multiplication, we realize such a correlator by optical convolution in one dimension and optical correlation in the other dimension of a optical system. A coherent matched spatial filter system operating on digital encoded signals, a noncoherent processor operating on complex-valued digital-encoded data, and a real-time multi-channel acousto-optic system for such operations are described and experimental verifications are included.

  15. Digitally encoded all-optical sensor multiplexing

    NASA Astrophysics Data System (ADS)

    Pervez, Anjum

    1992-01-01

    A digital, all-optical temperature sensor design concept based on optical sampling and digital encoding is presented. The proposed sensor generates 2M binary digital codewords of length M bits. The codewords are generated serially and, therefore, only a single output fiber line is required. A multiplexing scheme, which minimizes the power requirement per sensor array and facilitates a cost-effective digit regeneration for remote monitoring over long distance, is presented. The sensor arrays are used as building blocks to configure large scale sensor networks based on LAN topologies.

  16. Digital diffractive optics: Have diffractive optics entered mainstream industry yet?

    NASA Astrophysics Data System (ADS)

    Kress, Bernard; Hejmadi, Vic

    2010-05-01

    When a new technology is integrated into industry commodity products and consumer electronic devices, and sold worldwide in retail stores, it is usually understood that this technology has then entered the realm of mainstream technology and therefore mainstream industry. Such a leap however does not come cheap, as it has a double edge sword effect: first it becomes democratized and thus massively developed by numerous companies for various applications, but also it becomes a commodity, and thus gets under tremendous pressure to cut down its production and integration costs while not sacrificing to performance. We will show, based on numerous examples extracted from recent industry history, that the field of Diffractive Optics is about to undergo such a major transformation. Such a move has many impacts on all facets of digital diffractive optics technology, from the optical design houses to the micro-optics foundries (for both mastering and volume replication), to the final product integrators or contract manufacturers. The main causes of such a transformation are, as they have been for many other technologies in industry, successive technological bubbles which have carried and lifted up diffractive optics technology within the last decades. These various technological bubbles have been triggered either by real industry needs or by virtual investment hype. Both of these causes will be discussed in the paper. The adjective ""digital"" in "digital diffractive optics" does not refer only, as it is done in digital electronics, to the digital functionality of the element (digital signal processing), but rather to the digital way they are designed (by a digital computer) and fabricated (as wafer level optics using digital masking techniques). However, we can still trace a very strong similarity between the emergence of micro-electronics from analog electronics half a century ago, and the emergence of digital optics from conventional optics today.

  17. Advanced optical manufacturing digital integrated system

    NASA Astrophysics Data System (ADS)

    Tao, Yizheng; Li, Xinglan; Li, Wei; Tang, Dingyong

    2012-10-01

    It is necessarily to adapt development of advanced optical manufacturing technology with modern science technology development. To solved these problems which low of ration, ratio of finished product, repetition, consistent in big size and high precision in advanced optical component manufacturing. Applied business driven and method of Rational Unified Process, this paper has researched advanced optical manufacturing process flow, requirement of Advanced Optical Manufacturing integrated System, and put forward architecture and key technology of it. Designed Optical component core and Manufacturing process driven of Advanced Optical Manufacturing Digital Integrated System. the result displayed effective well, realized dynamic planning Manufacturing process, information integration improved ratio of production manufactory.

  18. Optical vortex phase-shifting digital holography.

    PubMed

    Guo, Cheng-Shan; Cheng, Xin; Ren, Xiu-Yun; Ding, Jian-Ping; Wang, Hui-Tian

    2004-10-18

    We report a new optical vortex phase-shifting method for digital holography, in which an optical vortex mode is taken as the reference beam for holographic recording, and the required phase shifts are directly generated by rotating the vortex mode. In digital reconstruction, the complex amplitude of the object wave can be retrieved by use of the conventional phase shifting algorithm on condition that the digital illumination beam is replaced by an vortex beam with the same topological charge as the reference used. Both the theoretical analysis and experimental results demonstrate the feasibility of this approach.

  19. Digital optical module design for PINGU

    SciTech Connect

    Sandstrom, Perry; Collaboration: IceCube-PINGU Collaboration

    2014-11-18

    The Precision IceCube Next Generation Upgrade (PINGU) will require optical sensors with similar performance as the digital optical modules (DOMs) of IceCube, but implemented in a higher-density array. A new design for the PINGU DOM (PDOM) is being pursued that retains the proven mechanical elements of the IceCube DOM, yet takes advantage of recently commercialized high-speed digitizer technology. The main features of the proposed PDOM electronics are discussed, along with status and plans for development. Proposed modifications to the IceCube string architecture that will accommodate the smaller vertical PDOM spacing are presented.

  20. The prospects of the digital optical computer

    NASA Astrophysics Data System (ADS)

    Bartelt, H.; Lohmann, A. W.; Weigelt, J.

    1985-03-01

    The suitability of electrons and photons for the purpose of computing is assessed. Based on these fundamental features it is pointed out why photons are in some ways better suited for parallel processors. Parallel processors are needed to satisfy the ever-increasing demand for speed of computation. The status of digital optical computing experiments is surveyed. It is concluded that electrons are well suited for switching operations as they occur in a logic processor. But electrons are not so easy to guide from one point to another point. On that score, photons are more suitable. Recently, photons became amenable also for logic processing. Hence, the stage is set for the development of an all-optical digital computer. A digital optical computer has as its assests: parallel processing; global interconnections, that are favorable for architecture and algorithms. But the digital optical computer is a late-comer. Nevertheless, the optical computer has a chance to supplement the electronic computer as a special purpose parallel processor.

  1. Optical interference with digital holograms

    NASA Astrophysics Data System (ADS)

    Gossman, David; Perez-Garcia, Benjamin; Hernandez-Aranda, Raul I.; Forbes, Andrew

    2016-07-01

    In 1804, Thomas Young reported the observation of fringes in the intensity of light, and attributed it to the concept of interference between coherent sources. In this paper, we revisit this famous experiment and show how it can easily be demonstrated with digital holography. We look closely at the concept of interference with light and ask, "fringes in what?" We then show that depending on how light interferes, fringe patterns in observables other than intensity can be seen. We explain this conceptually and demonstrate it experimentally. We provide a holistic approach to the topic, aided by modern laboratory practices for a straightforward demonstration of the underlying physics.

  2. Digitally enhanced optical fiber frequency reference.

    PubMed

    McRae, Terry G; Ngo, Silvie; Shaddock, Daniel A; Hsu, Magnus T L; Gray, Malcolm B

    2014-04-01

    We use digitally enhanced heterodyne interferometry to measure the stability of optical fiber laser frequency references. Suppression of laser frequency noise by over four orders of magnitude is achieved using post processing time delay interferometry, allowing us to measure the mechanical stability for frequencies as low as 100 μHz. The performance of the digitally enhanced heterodyne interferometer platform used here is not practically limited by the dynamic range or bandwidth issues that can occur in feedback stabilization systems. This allows longer measurement times, better frequency discrimination, a reduction in spatially uncorrelated noise sources and an increase in interferometer sensitivity. An optical fiber frequency reference with the stability reported here, over a signal band of 20 mHz-1 Hz, has potential for use in demanding environments, such as space-based interferometry missions and optical flywheel applications.

  3. Digital optical tape: Technology and standardization issues

    NASA Technical Reports Server (NTRS)

    Podio, Fernando L.

    1996-01-01

    During the coming years, digital data storage technologies will continue an aggressive growth to satisfy the user's need for higher storage capacities, higher data transfer rates and long-term archival media properties. Digital optical tape is a promising technology to satisfy these user's needs. As any emerging data storage technology, the industry faces many technological and standardization challenges. The technological challenges are great, but feasible to overcome. Although it is too early to consider formal industry standards, the optical tape industry has decided to work together by initiating prestandardization efforts that may lead in the future to formal voluntary industry standards. This paper will discuss current industry optical tape drive developments and the types of standards that will be required for the technology. The status of current industry prestandardization efforts will also be discussed.

  4. Digital micro-mirror devices in digital optical microscopy

    NASA Astrophysics Data System (ADS)

    Adeyemi, Adekunle Adesanya

    In this thesis, studies on the applications of digital micro-mirror devices (DMD) to enhancement of digital optical microscope images are presented. This involves adaptation of the fast switching capability and high optical efficiency of DMD to control the spatial illumination of the specimen. The first study focuses on a method of using DMD to enhance the dynamic range of a digital optical microscope. Our adaptive feedback illumination control method generates a high dynamic range image through an algorithm that combines the DMD-to-camera pixel geometrical mapping and a feedback operation. The feedback process automatically generates an illumination pattern in an iterative fashion that spatially modulates the DMD array elements on a pixel-by-pixel level. Via experiment, we demonstrate a transmitted-light microscope system that uses precise DMD control of a DMD-based projector to enhance the dynamic range ideally by a factor of 573. Results are presented showing approximately 5 times the camera dynamic range, enabling visualization over a wide range of specimen characteristics. The second study presents a technique for programming the source of the spherical reference illumination in a digital in-line holographic microscope using DMD. The programmable point source is achieved by individually addressing the elements of a DMD to spatially control the illumination of the object located at some distance from the source of the spherical reference field. Translation of the ON-state DMD mirror element changes the spatial location of the point source and consequently generates a sequence of translated holograms of the object. The experimental results obtained through numerical reconstruction of translated holograms of Latex microspheres shows the possibility of expanding the field of view by about 263% and also extracting depth information between features in an object volume. The common challenges associated with the use of DMD in coherent and broadband illumination

  5. Optical domain analog to digital conversion methods and apparatus

    SciTech Connect

    Vawter, Gregory A

    2014-05-13

    Methods and apparatus for optical analog to digital conversion are disclosed. An optical signal is converted by mapping the optical analog signal onto a wavelength modulated optical beam, passing the mapped beam through interferometers to generate analog bit representation signals, and converting the analog bit representation signals into an optical digital signal. A photodiode receives an optical analog signal, a wavelength modulated laser coupled to the photodiode maps the optical analog signal to a wavelength modulated optical beam, interferometers produce an analog bit representation signal from the mapped wavelength modulated optical beam, and sample and threshold circuits corresponding to the interferometers produce a digital bit signal from the analog bit representation signal.

  6. Digital optical recorder-reproducer system

    NASA Technical Reports Server (NTRS)

    Reddersen, Brad R. (Inventor); Zech, Richard G. (Inventor); Roberts, Howard N. (Inventor)

    1980-01-01

    A mass archival optical recording and reproduction system includes a recording light source such as a laser beam focussed and directed upon an acousto-optic linear modulator array (or page composer) that receives parallel blocks of data converted from a serial stream of digital data to be stored. The page composer imparts to the laser beam modulation representative of a plurality of parallel channels of data and through focussing optics downstream of the page composer parallel arrays of optical spots are recorded upon a suitable recording medium such as a photographic film floppy disc. The recording medium may be substantially frictionlessly and stably positioned for recording at a record/read station by an air-bearing platen arrangement which is preferably thermodynamically non-throttling so that the recording film may be positioned in the path of the information-carrying light beam in a static or dynamic mode. During readout, the page composer is bypassed and a readout light beam is focussed directly upon the recording medium containing an array of previously recorded digital spots, a sync bit, data positioning bits, and a tracking band. The readout beam which has been directed through the recording medium is then imaged upon a photodetector array, the output of which may be coupled to suitable electronic processing circuitry, such as a digital multiplexer, whereby the parallel spot array is converted back into the original serial data stream.

  7. Optical analog-to-digital converter

    NASA Technical Reports Server (NTRS)

    Evanchuk, Vincent L. (Inventor)

    1984-01-01

    A method and apparatus for converting the intensity of an unknown optical signal (B) into an electrical signal in digital form utilizes two elongated optical attenuators (11, 13), one for the unknown optical signal from a source (10) and one for a known optical signal (A) from a variable source (12), a plurality of photodetectors (e.g., 17, 18) along each attenuator for detecting the intensity of the optical signals, and a plurality of comparators (e.g., 21) connected to the photodetectors in pairs to determine at what points being compared the attenuated known signal equals the attenuated unknown signal. The intensity of the unknown relative to the known is thus determined by the output of a particular comparator. That output is automatically encoded to a relative intensity value in digital form through a balancing feedback control (24) and encoder (23). The digital value may be converted to analog form in a D-to-A converter (27) and used to vary the source of the known signal so that the attenuated intensity of the known signal at a predetermined point (comparator 16) equals the attenuated intensity of the unknown signal at the predetermined point of comparison. If the known signal is then equal to the unknown, there is verification of the analog-to-digital conversion being complete. Otherwise the output of the comparator indicating equality at some other point along the attenuators will provide an output which is encoded and added, through an accumulator comprised of a register (25) and an adder (26), to a previous relative intensity value thereby to further vary the intensity of the known signal source. The steps are repeated until full conversion is verified.

  8. Digital polarization holography advancing geometrical phase optics.

    PubMed

    De Sio, Luciano; Roberts, David E; Liao, Zhi; Nersisyan, Sarik; Uskova, Olena; Wickboldt, Lloyd; Tabiryan, Nelson; Steeves, Diane M; Kimball, Brian R

    2016-08-08

    Geometrical phase or the fourth generation (4G) optics enables realization of optical components (lenses, prisms, gratings, spiral phase plates, etc.) by patterning the optical axis orientation in the plane of thin anisotropic films. Such components exhibit near 100% diffraction efficiency over a broadband of wavelengths. The films are obtained by coating liquid crystalline (LC) materials over substrates with patterned alignment conditions. Photo-anisotropic materials are used for producing desired alignment conditions at the substrate surface. We present and discuss here an opportunity of producing the widest variety of "free-form" 4G optical components with arbitrary spatial patterns of the optical anisotropy axis orientation with the aid of a digital spatial light polarization converter (DSLPC). The DSLPC is based on a reflective, high resolution spatial light modulator (SLM) combined with an "ad hoc" optical setup. The most attractive feature of the use of a DSLPC for photoalignment of nanometer thin photo-anisotropic coatings is that the orientation of the alignment layer, and therefore of the fabricated LC or LC polymer (LCP) components can be specified on a pixel-by-pixel basis with high spatial resolution. By varying the optical magnification or de-magnification the spatial resolution of the photoaligned layer can be adjusted to an optimum for each application. With a simple "click" it is possible to record different optical components as well as arbitrary patterns ranging from lenses to invisible labels and other transparent labels that reveal different images depending on the side from which they are viewed.

  9. EDITORIAL: Optical tomography and digital holography

    NASA Astrophysics Data System (ADS)

    Coupland, Jeremy; Lobera, Julia

    2008-07-01

    The articles in this special feature in Measurement Science and Technology concern exciting new developments in the field of digital holography—the process of electronically recording and numerically reconstructing an optical field [1]. Making use of the enormous advances in digital imaging and computer technology, digital holography is presented in a range of applications from fluid flow measurement and structural analysis to medical imaging. The science of digital holography rests on the foundations of optical holography, on the work of Gabor in the late 1940s, and on the development of laser sources in the 1960s, which made his vision a practical reality [2]. Optical holography, however, uses a photosensitive material, both to record a latent image and subsequently to behave as a diffractive optical element with which to reconstruct the incident field. In this way display holograms, using silver halide materials for example, can produce life-size images that are virtually indistinguishable from the object itself [3]. Digital holography, in contrast, separates the steps of recording and reconstruction, and the final image is most often in the form of a 3D computer model. Of course, television cameras have been used from the beginnings of holography to record interferometric images. However, the huge disparity between the resolution of holographic recording materials (more than 3000 cycles/mm) and television cameras (around 50 cycles/mm) was raised as a major concern by early researchers. TV holography, as it was sometimes called, generally recorded low numerical aperture (NA) holograms producing images with characteristically large speckle and was therefore more often referred to as electronic speckle pattern interferomery (ESPI) [4]. It is possible, however, to record large NA holograms on a sensor with restricted resolution by using an objective lens or a diverging reference wave [5]. This is generally referred to as digital holographic microscopy (DHM) since

  10. Optical-digital hybrid image search system in cloud environment

    NASA Astrophysics Data System (ADS)

    Ikeda, Kanami; Kodate, Kashiko; Watanabe, Eriko

    2016-09-01

    To improve the versatility and usability of optical correlators, we developed an optical-digital hybrid image search system consisting of digital servers and an optical correlator that can be used to perform image searches in the cloud environment via a web browser. This hybrid system employs a simple method to obtain correlation signals and has a distributed network design. The correlation signals are acquired by using an encoder timing signal generated by a rotating disk, and the distributed network design facilitates the replacement and combination of the digital correlation server and the optical correlator.

  11. All-optical digital processor based on harmonic generation phenomena

    NASA Astrophysics Data System (ADS)

    Shcherbakov, Alexandre S.; Rakovsky, Vsevolod Y.

    1990-07-01

    Digital optical processors are designed to combine ultra- parallel data procesing capabilities of optical aystems cnd high accur&cy of performed computations. The ultimate limit of the processing rate can be anticipated from all-optical parcllel erchitecturea based on networks o logic gates using materials exibiting strong electronic nonlinearities with response times less than 1O seconds1.

  12. Why optics students should take digital signal processing courses and why digital signal processing students should take optics courses

    NASA Astrophysics Data System (ADS)

    Cathey, W. Thomas, Jr.

    2000-06-01

    This paper is based on the claim that future major contributions in the field of imaging systems will be made by those who have a background in both optics and digital signal processing. As the introduction of Fourier transforms and linear systems theory to optics had a major impact on the design of hybrid optical/digital imaging systems, the introduction of digital signal processing into optics programs will have a major impact. Examples are given of new hybrid imaging systems that have unique performance. By jointly designing the optics and the signal processing in a digital camera, a new paradigm arises where aberration balancing takes into consideration not only the number of surfaces and indices of refraction, but also the processing capability.

  13. Joint Applied Optics and Chinese Optics Letters feature introduction: digital holography and three-dimensional imaging.

    PubMed

    Poon, Ting-Chung

    2011-12-01

    This feature issue serves as a pilot issue promoting the joint issue of Applied Optics and Chinese Optics Letters. It focuses upon topics of current relevance to the community working in the area of digital holography and 3-D imaging.

  14. Digital adaptive optics line-scanning confocal imaging system.

    PubMed

    Liu, Changgeng; Kim, Myung K

    2015-01-01

    A digital adaptive optics line-scanning confocal imaging (DAOLCI) system is proposed by applying digital holographic adaptive optics to a digital form of line-scanning confocal imaging system. In DAOLCI, each line scan is recorded by a digital hologram, which allows access to the complex optical field from one slice of the sample through digital holography. This complex optical field contains both the information of one slice of the sample and the optical aberration of the system, thus allowing us to compensate for the effect of the optical aberration, which can be sensed by a complex guide star hologram. After numerical aberration compensation, the corrected optical fields of a sequence of line scans are stitched into the final corrected confocal image. In DAOLCI, a numerical slit is applied to realize the confocality at the sensor end. The width of this slit can be adjusted to control the image contrast and speckle noise for scattering samples. DAOLCI dispenses with the hardware pieces, such as Shack–Hartmann wavefront sensor and deformable mirror, and the closed-loop feedbacks adopted in the conventional adaptive optics confocal imaging system, thus reducing the optomechanical complexity and cost. Numerical simulations and proof-of-principle experiments are presented that demonstrate the feasibility of this idea.

  15. Digital adaptive optics line-scanning confocal imaging system

    PubMed Central

    Liu, Changgeng; Kim, Myung K.

    2015-01-01

    Abstract. A digital adaptive optics line-scanning confocal imaging (DAOLCI) system is proposed by applying digital holographic adaptive optics to a digital form of line-scanning confocal imaging system. In DAOLCI, each line scan is recorded by a digital hologram, which allows access to the complex optical field from one slice of the sample through digital holography. This complex optical field contains both the information of one slice of the sample and the optical aberration of the system, thus allowing us to compensate for the effect of the optical aberration, which can be sensed by a complex guide star hologram. After numerical aberration compensation, the corrected optical fields of a sequence of line scans are stitched into the final corrected confocal image. In DAOLCI, a numerical slit is applied to realize the confocality at the sensor end. The width of this slit can be adjusted to control the image contrast and speckle noise for scattering samples. DAOLCI dispenses with the hardware pieces, such as Shack–Hartmann wavefront sensor and deformable mirror, and the closed-loop feedbacks adopted in the conventional adaptive optics confocal imaging system, thus reducing the optomechanical complexity and cost. Numerical simulations and proof-of-principle experiments are presented that demonstrate the feasibility of this idea. PMID:26140334

  16. Analysis of a digital microstrip optical switch: a novel method.

    PubMed

    Al-Ruwaihi, K M; Hindy, M A

    1997-02-20

    A time domain analysis of an optically controlled digital microstrip switch for microwave integrated circuits on Si substrates is studied. A new model for high-frequency pulse propagation on a microstrip optical switch for different optical parameters is presented. A frequency-dependent macromodel for a microstrip line with a gap is implemented in Spice 3, taking into consideration high-frequency pulse dispersion, conductor and dielectric losses, metallization thickness, gap length, and different optical parameters such as optical energy, surface recombination velocities, and diffusion of generated carriers. In addition, the developed model has been used to optimize the switching frequency, gap length, level of optical power, and suitable substrate material parameters.

  17. Optical Oversampled Analog-to-Digital Conversion

    DTIC Science & Technology

    1992-06-29

    Introduction 1 1.1 Background and Motivation........................... 2 1.1.1 Nyquist Rate Conversion........................ 3 1.1.2 Optical A/ D ...processor [9] was used with the electronic analog input signal driving an optical beam deflector . This method of optical A/ D conversion was limited...implement an optical oversampled A/ D converter. From the theoretical development in Chapter 2 , there are two principal functions which require optical

  18. Digital-Electronic/Optical Apparatus Would Recognize Targets

    NASA Technical Reports Server (NTRS)

    Scholl, Marija S.

    1994-01-01

    Proposed automatic target-recognition apparatus consists mostly of digital-electronic/optical cross-correlator that processes infrared images of targets. Infrared images of unknown targets correlated quickly with images of known targets. Apparatus incorporates some features of correlator described in "Prototype Optical Correlator for Robotic Vision System" (NPO-18451), and some of correlator described in "Compact Optical Correlator" (NPO-18473). Useful in robotic system; to recognize and track infrared-emitting, moving objects as variously shaped hot workpieces on conveyor belt.

  19. Optical field data compression by opto-digital means

    NASA Astrophysics Data System (ADS)

    Velez, Alejandro; Fredy Barrera, John; Trejos, Sorayda; Tebaldi, Myrian; Torroba, Roberto

    2016-12-01

    Compression of optical field data is of interest due to the many applications where this kind of information processing is necessary. In particular, holographic recording has significant requirements in a high volume of both phase and amplitude data. We analyze and present a comparison between the performances of two lossy compression methods applied over optical field data: the optical scaling compression technique based on a virtual optical system that performs a scaling of the optical field data, and the JPEG format. In particular, we study the compression of optical fields data extracted from off-axis digital holograms. Our results show that optical scaling is better suited for the compression of the highly random phase information found in the optical field data of 3D diffuse objects. Data loss and volume reduction for each method are measured and compared.

  20. Structured-light-assisted wireless digital optical communications

    NASA Astrophysics Data System (ADS)

    Long, Yunfei; Wang, Shuaijun; Wu, Wei; Yang, Xiaomin; Jeon, Gwanggil; Liu, Kai

    2015-11-01

    Camera-projector-pair-based digital optical communications are attractive for safe and flexible usages, while the state-of-the-art systems suffer from various disadvantages or distortions of communication channels, including the irregularity and the non-uniform albedo of projection surfaces, the radial distortion of optical lenses, etc. In this paper, we present a novel method for digital optical communications. Assisted by structured light illumination, we overcome those disadvantages and accurately derive the models of the communication channels. First, by deriving accurate model-free coordinates maps for the camera-projector pair, we overcome the issues caused by the irregularity of projection surfaces and the radial distortion of optical lenses. Second, by normalizing received digital optical signals with calibrated system parameters, we overcome the issue arising from the non-uniform albedo of projection surfaces. Thus, with the models and all pixel-wise operations, we finally achieve robust and real-time wireless digital optical communications. Experimental results verify the validity of the proposed method.

  1. Electro-Optic Analog/Digital Converter.

    DTIC Science & Technology

    electro - optic material and a source of linearly polarized light is arranged to transmit its light energy along each of the optical waveguides. Electrodes are disposed contiguous to the optical waveguides for impressing electric fields thereacross. An input signal potential is applied to the electrodes to produce electric fields of intensity relative to each of the waveguides such that causes phase shift and resultant change of polarization which can be detected as representative of a binary ’one’ or binary ’zero’ for each of the channel optical

  2. Digital signal processing for fiber-optic thermometers

    SciTech Connect

    Fernicola, V.; Crovini, L.

    1994-12-31

    A digital signal processing scheme for measurement of exponentially-decaying signals, such as those found in fluorescence, lifetime-based, fiber-optic sensors, is proposed. The instrument uses a modified digital phase-sensitive-detection technique with the phase locked to a fixed value and the modulation period tracking the measured lifetime. Typical resolution of the system is 0.05% for slow decay (>500 {mu}s) and 0.1% for fast decay.

  3. KM3NeT Digital Optical Module electronics

    NASA Astrophysics Data System (ADS)

    Real, Diego

    2016-04-01

    The KM3NeT collaboration is currently building of a neutrino telescope with a volume of several cubic kilometres at the bottom of the Mediterranean Sea. The telescope consists of a matrix of Digital Optical Modules that will detect the Cherenkov light originated by the interaction of the neutrinos in the proximity of the detector. This contribution describes the main components of the read-out electronics of the Digital Optical Module: the Power Board, which delivers all the power supply required by the Digital Optical Molule electronics; the Central Logic Board, the main core of the read-out system, hosting 31 Time to Digital Converters with 1 ns resolution and the White Rabbit protocol embedded in the Central Logic Board Field Programmable Gate Array; the Octopus boards, that transfer the Low Voltage Digital Signals from the PMT bases to the Central Logic Board and finally the PMT bases, in charge of converting the analogue signal produced in the 31 3" PMTs into a Low Voltage Digital Signal.

  4. Holographic fluorescence microscopy with incoherent digital holographic adaptive optics.

    PubMed

    Jang, Changwon; Kim, Jonghyun; Clark, David C; Lee, Seungjae; Lee, Byoungho; Kim, Myung K

    2015-01-01

    Introduction of adaptive optics technology into astronomy and ophthalmology has made great contributions in these fields, allowing one to recover images blurred by atmospheric turbulence or aberrations of the eye. Similar adaptive optics improvement in microscopic imaging is also of interest to researchers using various techniques. Current technology of adaptive optics typically contains three key elements: a wavefront sensor, wavefront corrector, and controller. These hardware elements tend to be bulky, expensive, and limited in resolution, involving, for example, lenslet arrays for sensing or multiactuator deformable mirrors for correcting. We have previously introduced an alternate approach based on unique capabilities of digital holography, namely direct access to the phase profile of an optical field and the ability to numerically manipulate the phase profile. We have also demonstrated that direct access and compensation of the phase profile are possible not only with conventional coherent digital holography, but also with a new type of digital holography using incoherent light: selfinterference incoherent digital holography (SIDH). The SIDH generates a complex—i.e., amplitude plus phase—hologram from one or several interferograms acquired with incoherent light, such as LEDs, lamps, sunlight, or fluorescence. The complex point spread function can be measured using guide star illumination and it allows deterministic deconvolution of the full-field image. We present experimental demonstration of aberration compensation in holographic fluorescence microscopy using SIDH. Adaptive optics by SIDH provides new tools for improved cellular fluorescence microscopy through intact tissue layers or other types of aberrant media.

  5. Holographic fluorescence microscopy with incoherent digital holographic adaptive optics

    NASA Astrophysics Data System (ADS)

    Jang, Changwon; Kim, Jonghyun; Clark, David C.; Lee, Seungjae; Lee, Byoungho; Kim, Myung K.

    2015-11-01

    Introduction of adaptive optics technology into astronomy and ophthalmology has made great contributions in these fields, allowing one to recover images blurred by atmospheric turbulence or aberrations of the eye. Similar adaptive optics improvement in microscopic imaging is also of interest to researchers using various techniques. Current technology of adaptive optics typically contains three key elements: a wavefront sensor, wavefront corrector, and controller. These hardware elements tend to be bulky, expensive, and limited in resolution, involving, for example, lenslet arrays for sensing or multiactuator deformable mirrors for correcting. We have previously introduced an alternate approach based on unique capabilities of digital holography, namely direct access to the phase profile of an optical field and the ability to numerically manipulate the phase profile. We have also demonstrated that direct access and compensation of the phase profile are possible not only with conventional coherent digital holography, but also with a new type of digital holography using incoherent light: self­interference incoherent digital holography (SIDH). The SIDH generates a complex-i.e., amplitude plus phase-hologram from one or several interferograms acquired with incoherent light, such as LEDs, lamps, sunlight, or fluorescence. The complex point spread function can be measured using guide star illumination and it allows deterministic deconvolution of the full-field image. We present experimental demonstration of aberration compensation in holographic fluorescence microscopy using SIDH. Adaptive optics by SIDH provides new tools for improved cellular fluorescence microscopy through intact tissue layers or other types of aberrant media.

  6. Digital holography techniques for optical interference

    NASA Astrophysics Data System (ADS)

    Perez-Garcia, Benjamin; Gossman, David; Hernandez-Aranda, Raul I.; Forbes, Andrew

    2016-09-01

    In this work we revisit Young's experiment and show how it can be done with digital holography. We study different properties of light and show that depending on how light interferes, fringe patterns in other observables arise. We explain this conceptually and demonstrate how this can be implemented experimentally. We aid the reader with a tutorial-like approach and provide the necessary tools to easily perform the experiments.

  7. Applications of digital holography to measurements and optical characterization

    NASA Astrophysics Data System (ADS)

    Sang, Xinzhu; Yu, Chongxiu; Yu, Miao; Hsu, Dashsiung

    2011-09-01

    With recent advances in high-speed computer and video capture technology, holographic films used in classical holography can be replaced with charged-coupled devices (CCD) and complementary metal-oxide-semiconductor (CMOS) image sensors to record and numerically reconstruct a hologram, which is now known as digital holography. Digital holography introduces something new to optical science. Wet chemical processing and other time-consuming procedures can be removed, so numerical recording and reconstruction can be realized in almost real time. It allows us to characterize the phase of a light field as well the intensity, and so the whole wave field can be measured and stored in a computer. Digital holography is expanding applications of holography and becoming a scientific and technological tool. Its use has now increased for measuring amplitude and the phase of object waves, displacement and three dimensional shape, particle distributions and motions, characterization of the refractive index and biological tissues, and vibration analysis, etc. Here, basic principles of digital holography for optical measurement and characterization are described. Taking into consideration the rapid advance in CCD and CMOS sensors as the background, the state-of-the-art applications of digital holography to optical measurement and characterization are presented.

  8. Digital optical computers at the optoelectronic computing systems center

    NASA Technical Reports Server (NTRS)

    Jordan, Harry F.

    1991-01-01

    The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

  9. Large Scale Medical Databases On Digital Optical Discs

    NASA Astrophysics Data System (ADS)

    Rann, Leonard S.

    1985-04-01

    Since 1974, Micromedex Inc., has authored and published three widely used medical databases on microfiche. An integrated medical database system has been designed to run on an IBM-PC compatible computer utilizing digital optical discs as the primary mass storage medium.

  10. Versatile optical microscopy using a reconfigurable hemispherical digital condenser

    PubMed Central

    Sen, Sanchari; Molina, Luis; Cao, Dongyu; Desai, Darshan B.; Bernussi, Ayrton A.; Grave de Peralta, Luis

    2015-01-01

    We present a computer-controlled hemispherical digital condenser and demonstrate that a single device can be used to implement a variety of both well established and novel optical microscopy techniques. We verified the condenser capabilities by imaging fabricated periodic patterned structures and biological samples. PMID:25798294

  11. 40 Gbit/s asynchronous digital optical regenerator.

    PubMed

    Hillerkuss, D; Ellis, A; Zarris, G; Simeonidou, D; Leuthold, J; Cotter, D

    2008-11-10

    We present the first experimental demonstration of an asynchronous digital optical regenerator at 42.67 Gbit/s. The system effectively retimes incoming asynchronous data bursts to a local clock without burst mode clock recovery and converts the signal to a desired wavelength and duty cycle.

  12. Application of bistable optical logic gate arrays to all-optical digital parallel processing

    NASA Astrophysics Data System (ADS)

    Walker, A. C.

    1986-05-01

    Arrays of bistable optical gates can form the basis of an all-optical digital parallel processor. Two classes of signal input geometry exist - on- and off-axis - and lead to distinctly different device characteristics. The optical implementation of multisignal fan-in to an array of intrinsically bistable optical gates using the more efficient off-axis option is discussed together with the construction of programmable read/write memories from optically bistable devices. Finally the design of a demonstration all-optical parallel processor incorporating these concepts is presented.

  13. Digital optical phase conjugation of fluorescence in turbid tissue

    SciTech Connect

    Vellekoop, Ivo M.; Cui Meng; Yang Changhuei

    2012-08-20

    We demonstrate a method for phase conjugating fluorescence. Our method, called reference free digital optical phase conjugation, can conjugate extremely weak, incoherent optical signals. It was used to phase conjugate fluorescent light originating from a bead covered with 0.5 mm of light-scattering tissue. The phase conjugated beam refocuses onto the bead and causes a local increase of over two orders of magnitude in the light intensity. Potential applications are in imaging, optical trapping, and targeted photochemical activation inside turbid tissue.

  14. Parallel optical-path-length-shifting digital holography.

    PubMed

    Awatsuji, Yasuhiro; Koyama, Takamasa; Tahara, Tatsuki; Ito, Kenichi; Shimozato, Yuki; Kaneko, Atsushi; Nishio, Kenzo; Ura, Shogo; Kubota, Toshihiro; Matoba, Osamu

    2009-12-01

    The authors propose an optical-path-length-shifting digital holography as a technique capable of single-shot recording of three-dimensional information of objects. With a single image sensor, the proposed technique can simultaneously record all of the holograms required for the in-line digital holography that reconstruct the image of an object from two intensity measurements at different planes. The technique can be optically implemented by using an optical-path-length-shifting array device located in the common path of the reference and object waves. The array device has periodic structure of two-step optical-path difference. The configuration of the array device of the proposed technique is simpler than the phase-shifting array device required for parallel phase-shifting digital holographies. Therefore, the optical system of the proposed technique is more suitable for the realization of a single-shot in-line digital holography system that removes the conjugate image from the reconstructed image. The authors conducted both a numerical simulation and a preliminary experiment of the proposed technique. The reconstructed images were quantitatively evaluated by using root mean squared error. In comparison to single-shot digital holography using the Fresnel transform alone, with the proposed technique the root mean squared errors of the technique were reduced to less than 1/6 in amplitude and 1/3 in phase. Also the results of the simulation and experiment agreed well with the images of an object. Thus the effectiveness of the proposed technique is verified.

  15. Holographic fluorescence microscopy with incoherent digital holographic adaptive optics

    NASA Astrophysics Data System (ADS)

    Jang, Changwon; Kim, Jonghyun; Clark, David C.; Lee, Byoungho; Kim, Myung K.

    2015-03-01

    Introduction of adaptive optics technology into astronomy and ophthalmology has made great contributions in these fields, allowing one to recover images blurred by atmospheric turbulence or aberrations of the eye. Similar adaptive optics improvement in microscopic imaging is also of interest to researchers using various techniques. Current technology of adaptive optics typically contains three key elements: wavefront sensor, wavefront corrector and controller. These hardware elements tend to be bulky, expensive, and limited in resolution, involving, e.g., lenslet arrays for sensing or multi-acuator deformable mirrors for correcting. We have previously introduced an alternate approach to adaptive optics based on unique capabilities of digital holography, namely direct access to the phase profile of an optical field and the ability to numerically manipulate the phase profile. We have also demonstrated that direct access and compensation of the phase profile is possible not only with the conventional coherent type of digital holography, but also with a new type of digital holography using incoherent light: self-interference incoherent digital holography (SIDH). The SIDH generates complex - i.e. amplitude plus phase - hologram from one or several interferograms acquired with incoherent light, such as LEDs, lamps, sunlight, or fluorescence. The complex point spread function can be measured using a guide star illumination and it allows deterministic deconvolution of the full-field image. We present experimental demonstration of aberration compensation in holographic fluorescence microscopy using SIDH. The adaptive optics by SIDH provides new tools for improved cellular fluorescence microscopy through intact tissue layers or other types of aberrant media.

  16. Resolution-enhanced all-optical analog-to-digital converter employing cascade optical quantization operation.

    PubMed

    Kang, Zhe; Zhang, Xianting; Yuan, Jinhui; Sang, Xinzhu; Wu, Qiang; Farrell, Gerald; Yu, Chongxiu

    2014-09-08

    In this paper, a cascade optical quantization scheme is proposed to realize all-optical analog-to-digital converter with efficiently enhanced quantization resolution and achievable high analog bandwidth of larger than 20 GHz. Employing the cascade structure of an unbalanced Mach-zehnder modulator and a specially designed optical directional coupler, we predict the enhancement of number-of-bits can be up to 1.59-bit. Simulation results show that a 25 GHz RF signal is efficiently digitalized with the signal-to-noise ratio of 33.58 dB and effective-number-of-bits of 5.28-bit.

  17. The KM3NeT Digital Optical Module

    NASA Astrophysics Data System (ADS)

    Vivolo, Daniele

    2016-04-01

    KM3NeT is a European deep-sea multidisciplinary research infrastructure in the Mediterranean Sea. It will host a km3-scale neutrino telescope and dedicated instruments for long-term and continuous measurements for Earth and Sea sciences. The KM3NeT neutrino telescope is a 3-dimensional array of Digital Optical Modules, suspended in the sea by means of vertical string structures, called Detection Units, supported by two pre-stretched Dyneema ropes, anchored to the seabed and kept taut with a system of buoys. The Digital Optical Module represents the active part of the neutrino telescope. It is composed by a 17-inch, 14 mm thick borosilicate glass (Vitrovex) spheric vessel housing 31 photomultiplier tubes with 3-inch photocathode diameter and the associated front-end and readout electronics. The technical solution adopted for the KM3NeT optical modules is characterized by an innovative design, considering that existing neutrino telescopes, Baikal, IceCube and ANTARES, all use large photomultipliers, typically with a diameter of 8″ or 10″. It offers several advantages: higher sensitive surface (1260 cm2), weaker sensitivity to Earth's magnetic field, better distinction between single-photon and multi-photon events (photon counting) and directional information with an almost isotropic field of view. In this contribution the design and the performance of the KM3NeT Digital Optical Modules are discussed, with a particular focus on enabling technologies and integration procedure.

  18. Applying of digital signal processing to optical equisignal zone system

    NASA Astrophysics Data System (ADS)

    Maraev, Anton A.; Timofeev, Aleksandr N.; Gusarov, Vadim F.

    2015-05-01

    In this work we are trying to assess the application of array detectors and digital information processing to the system with the optical equisignal zone as a new method of evaluating of optical equisignal zone position. Peculiarities of optical equisignal zone formation are described. The algorithm of evaluation of optical equisignal zone position is applied to processing on the array detector. This algorithm enables to evaluate as lateral displacement as turning angles of the receiver relative to the projector. Interrelation of parameters of the projector and the receiver is considered. According to described principles an experimental set was made and then characterized. The accuracy of position evaluation of the equisignal zone is shown dependent of the size of the equivalent entrance pupil at processing.

  19. Study of optical design of three-dimensional digital ophthalmoscopes.

    PubMed

    Fang, Yi-Chin; Yen, Chih-Ta; Chu, Chin-Hsien

    2015-10-01

    This study primarily involves using optical zoom structures to design a three-dimensional (3D) human-eye optical sensory system with infrared and visible light. According to experimental data on two-dimensional (2D) and 3D images, human-eye recognition of 3D images is substantially higher (approximately 13.182%) than that of 2D images. Thus, 3D images are more effective than 2D images when they are used at work or in high-recognition devices. In the optical system design, infrared and visible light wavebands were incorporated as light sources to perform simulations. The results can be used to facilitate the design of optical systems suitable for 3D digital ophthalmoscopes.

  20. Digital polarization holography advancing 4G optics (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    De Sio, Luciano; Roberts, David E.; Tabiryan, Nelson V.; Steeves, Diane M.; Kimball, Brian R.

    2016-09-01

    The fourth generation optics (4G optics) enables the realization of novel optical components (lenses, gratings, vector vortices, etc.) by patterning the optical axis orientation in the plane of an anisotropic film. Such components exhibit near 100% diffraction efficiency for wavelengths meeting half-wave retardation condition. In this framework, we have advanced a step-forward by realizing different diffractive waveplates (DWs) with arbitrary spatial patterns of the optical axis orientation by exploiting the capability of a Digital Spatial Light Polarization Converter (DSLPC). The DSLPC is based on a reflective, high resolution Spatial Light Modulator (SLM) combined with an "ad hoc" optical setup. The most attractive feature of the use of a DSLPC for photoalignment is that the orientation of the alignment layer, and therefore of the fabricated liquid crystal (LC) or liquid crystal polymer (LCP) DWs, can be specified on a pixel-by-pixel basis. By varying the optical magnification or de-magnification between the SLM and the alignment layer, the spatial resolution of the photoaligned layer can be adjusted to be optimal for each application. We show that with a simple "click" it is possible to record different high resolution optical components as well as arbitrary patterns ranging from lenses to invisible and even dual labels.

  1. Digital image compression for a 2f multiplexing optical setup

    NASA Astrophysics Data System (ADS)

    Vargas, J.; Amaya, D.; Rueda, E.

    2016-07-01

    In this work a virtual 2f multiplexing system was implemented in combination with digital image compression techniques and redundant information elimination. Depending on the image type to be multiplexed, a memory-usage saving of as much as 99% was obtained. The feasibility of the system was tested using three types of images, binary characters, QR codes, and grey level images. A multiplexing step was implemented digitally, while a demultiplexing step was implemented in a virtual 2f optical setup following real experimental parameters. To avoid cross-talk noise, each image was codified with a specially designed phase diffraction carrier that would allow the separation and relocation of the multiplexed images on the observation plane by simple light propagation. A description of the system is presented together with simulations that corroborate the method. The present work may allow future experimental implementations that will make use of all the parallel processing capabilities of optical systems.

  2. Optical digital microscopy for cyto- and hematological studies in vitro

    NASA Astrophysics Data System (ADS)

    Ganilova, Yu. A.; Dolmashkin, A. A.; Doubrovski, V. A.; Yanina, I. Yu.; Tuchin, V. V.

    2013-08-01

    The dependence of the spatial resolution and field of view of an optical microscope equipped with a CCD camera on the objective magnification has been experimentally investigated. Measurement of these characteristics has shown that a spatial resolution of 20-25 px/μm at a field of view of about 110 μm is quite realistic; this resolution is acceptable for a detailed study of the processes occurring in cell. It is proposed to expand the dynamic range of digital camera by measuring and approximating its light characteristics with subsequent plotting of the corresponding calibration curve. The biological objects of study were human adipose tissue cells, as well as erythrocytes and their immune complexes in human blood; both objects have been investigated in vitro. Application of optical digital microscopy for solving specific problems of cytology and hematology can be useful in both biomedical studies in experiments with objects of nonbiological origin.

  3. Speckle reduction in optical coherence tomography images using digital filtering

    PubMed Central

    Ozcan, Aydogan; Bilenca, Alberto; Desjardins, Adrien E.; Bouma, Brett E.; Tearney, Guillermo J.

    2009-01-01

    Speckle noise is a ubiquitous artifact that limits the interpretation of optical coherence tomography images. Here we apply various speckle-reduction digital filters to optical coherence tomography images and compare their performance. Our results indicate that shift-invariant, nonorthogonal wavelet-transform-based filters together with enhanced Lee and adaptive Wiener filters can significantly reduce speckle and increase the signal-to-noise ratio, while preserving strong edges. The speckle reduction capabilities of these filters are also compared with speckle reduction from incoherent angular compounding. Our results suggest that by using these digital filters, the number of individual angles required to attain a certain level of speckle reduction can be decreased. PMID:17728812

  4. Digital optical tomography system for dynamic breast imaging.

    PubMed

    Flexman, Molly L; Khalil, Michael A; Al Abdi, Rabah; Kim, Hyun K; Fong, Christopher J; Desperito, Elise; Hershman, Dawn L; Barbour, Randall L; Hielscher, Andreas H

    2011-07-01

    Diffuse optical tomography has shown promising results as a tool for breast cancer screening and monitoring response to chemotherapy. Dynamic imaging of the transient response of the breast to an external stimulus, such as pressure or a respiratory maneuver, can provide additional information that can be used to detect tumors. We present a new digital continuous-wave optical tomography system designed to simultaneously image both breasts at fast frame rates and with a large number of sources and detectors. The system uses a master-slave digital signal processor-based detection architecture to achieve a dynamic range of 160 dB and a frame rate of 1.7 Hz with 32 sources, 64 detectors, and 4 wavelengths per breast. Included is a preliminary study of one healthy patient and two breast cancer patients showing the ability to identify an invasive carcinoma based on the hemodynamic response to a breath hold.

  5. Digital balanced detection for fast optical computerized tomography

    NASA Astrophysics Data System (ADS)

    Hafiz, Rehan; Ozanyan, Krikor B.

    2006-10-01

    Analogue Balanced Photo-detection has found extensive usage in high- sensitivity small signal applications e.g. coherent heterodyne detection. It is particularly effective for laser intensity noise removal. Nevertheless, the high cost of the commercially available analogue systems makes them unsuitable for multi-channel applications, such as fast tomography. In this paper a flexible, scalable, inexpensive and compact solution for multi channel digital balanced detection is presented. The proposed system has two components: an analogue front-end, comprising a differential photodiode amplifier for minimizing the external interference noise, and a digital balanced noise remover. The latter component initially calculates a balancing factor (BF) from the average power ratio of the signal and reference photocurrents, measured with the object removed from the signal path. Three digital balancing algorithms (DBAx) are considered for subsequent processing. In DBA1, BF is directly used in real-time ratiometric calculations. In DBA2, the BF is adjusted in real time by monitoring the window-averaged power of the received photocurrents. In DBA3, first the baseline is removed using differentiation and then ratiometric detection is performed. Using the digital alternative only one measurement of the reference beam is necessary for single-source, multi-channel detection systems. The data from multiple channels are processed in parallel by pipelined hardware, configured as a state machine. The proposed system leads to a fast optical computerized tomography system using digital balanced detection.

  6. Adaptive optics in digital micromirror based confocal microscopy

    NASA Astrophysics Data System (ADS)

    Pozzi, P.; Wilding, D.; Soloviev, O.; Vdovin, G.; Verhaegen, M.

    2016-03-01

    This proceeding reports early results in the development of a new technique for adaptive optics in confocal microscopy. The term adaptive optics refers to the branch of optics in which an active element in the optical system is used to correct inhomogeneities in the media through which light propagates. In its most classical form, mostly used in astronomical imaging, adaptive optics is achieved through a closed loop in which the actuators of a deformable mirror are driven by a wavefront sensor. This approach is severely limited in fluorescence microscopy, as the use of a wavefront sensor requires the presence of a bright, point like source in the field of view, a condition rarely satisfied in microscopy samples. Previously reported approaches to adaptive optics in fluorescence microscopy are therefore limited to the inclusion of fluorescent microspheres in the sample, to use as bright stars for wavefront sensors, or time consuming sensorless optimization procedures, requiring several seconds of optimization before the acquisition of a single image. We propose an alternative approach to the problem, implementing sensorless adaptive optics in a Programmable array microscope. A programmable array microscope is a microscope based on a digital micromirror device, in which the single elements of the micromirror act both as point sources and pinholes.

  7. Enhancement Of Optical Registration Signals Through Digital Signal Processing Techniques

    NASA Astrophysics Data System (ADS)

    Cote, Daniel R.; Lazo-Wasem, Jeanne

    1988-01-01

    Alignment and setup of lighography processes has largely been conducted on special test wafers. Actual product level optimization has been limited to manual techniques such as optical verniers. This is especially time consuming and prone to inconsistencies when the registration characteristics of lithographic systems are being measured. One key factor obstructing the use of automated metrology equipment on product level wafers is the inability to discern reliably, metrology features from the background noise and variations in optical registration signals. This is often the case for metal levels such as aluminum and tungsten. This paper discusses methods for enhancement of typical registration signals obtained from difficult semiconductor process levels. Brightfield and darkfield registration signals are obtained using a microscope and a 1024 element linear photodiode array. These signals are then digitized and stored on the hard disk of a computer. The techniques utilized include amplitude selective and adaptive and non-adaptive frequency domain filtering techniques. The effect of each of these techniques upon calculated registration values is analyzed by determining the positional variation of the center location of a two line registration feature. Plots of raw and processed signals obtained are presented as are plots of the power spectral density of ideal metrology feature signal and noise patterns. It is concluded that the proper application of digital signal processing (DSP) techniques to problematic optical registration signals greatly enhances the applicability of automated optical registration measurement techniques to difficult semiconductor process levels.

  8. Optical processing architecture and its potential application for digital and analog radiography.

    PubMed

    Liu, H; Xu, J; Fajardo, L L

    1999-04-01

    In this report we introduce the fundamental architectures and the potential applications of optical processing techniques in medical imaging. Three basic optical processing architectures were investigated for digital and analog radiography. The processors consist of a module that converts either the analog or the digital radiograph into a coherent light distribution; a coherent optical processing architecture that performs various mathematical operations; a programmable digital-optical interface and other accessories. Optical frequency filters were implemented for mammographic and other clinical feature enhancement. In medical image processing, digital computers offer the advantages of programmability and flexibility. In contrast, optical processors perform parallel image processing with high speed. Optical processors also offer analog nature, compact size, and cost effectiveness. With technical advances of digital-optical interface devices, the medical image processor, in the foreseeable future, may be a hybrid device, namely, a programmable optical architecture.

  9. Optical Synchrotron Radiation Beam Imaging with a Digital Mask

    SciTech Connect

    Fiorito, R. B.; Zhang, H. D.; Corbett, W. J.; Fisher, A. S.; Mok, W. Y.; Tian, K.; Douglas, D.; Wilson, F. G.; Zhang, S.; Mitsuhashi, T. M.; Shkvarunets, A. G.

    2012-11-01

    We have applied a new imaging/optical masking technique, which employs a digital micro-mirror device (DMD) and optical synchrotron radiation (OSR), to perform high dynamic range (DR) beam imaging at the JLAB Energy Recovery Linac and the SLAC/SPEAR3 Synchrotron Light Source. The OSR from the beam is first focused onto the DMD to produce a primary image; selected areas of this image are spatially filtered by controlling the state of individual micro-mirrors; and finally, the filtered image is refocused onto a CCD camera. At JLAB this technique has been used successfully to view the beam halo with a DR ~ 105. At SPEAR3 the DMD was used to filter out the bright core of the stored beam to study the turn-by-turn dynamics of the 10-3 weaker injected beam. We describe the optical performance, present limitations and our plans to improve the DR of both experimental systems.

  10. Digital Fluoroscopy with AN Optically Coupled Charge-Coupled Device

    NASA Astrophysics Data System (ADS)

    Liu, Hong

    1992-01-01

    This research was aimed at investigating the potential of developing an optically coupled charge-coupled device (CCD) imaging system for some digital fluoroscopic applications. The viability of this concept for fluoroscopic imaging was studied with respect to image intensifier-television (II -TV) techniques. The anticipated advantages of the optically coupled CCD, compared with II-TV, include higher contrast sensitivity, larger dynamic range, moderate spatial resolution and clinically acceptable dose. Following an investigation of some theoretical and practical issues concerning the optical coupling efficiency between the intensifying screen and the CCD imager, mathematical methods were developed to relate the signal, signal-to -noise ratio, and x-ray quantum efficiency of the optically coupled CCD imaging chain. The spatial resolution of the system was also analyzed. Using an ultra-sensitive CCD, as well as improved scintillating and optical coupling techniques, we built a laboratory system for experiments. We conducted measurements of the modulation transfer function (MTF), contrast sensitivity, contrast-detail detectability and detector contrast. The results suggest that the lesion detectability of our sub-optimal system was comparable to that of a screen-film technique under the same radiation dose, and was significantly better than II-TV fluoroscopy. Potential clinical applications of our system include mammography, pre-operational localization, pediatric chest radiography, and single tracer autoradiography. Images of selected phantoms, pathological specimens and small animals were acquired to demonstrate the radiologic quality attainable for such procedures. We conclude that developing an x-ray quantum limited, pseudo-real time, digital fluoroscopic imaging system (for some applications) without an II appears to be theoretically and technically feasible. The successful development of optically coupled CCD fluoroscopy has the potential for improving the

  11. A Digital Staining Algorithm for Optical Coherence Tomography Images of the Optic Nerve Head

    PubMed Central

    Mari, Jean-Martial; Aung, Tin; Cheng, Ching-Yu; Strouthidis, Nicholas G.; Girard, Michaël J. A.

    2017-01-01

    Purpose To digitally stain spectral-domain optical coherence tomography (OCT) images of the optic nerve head (ONH), and highlight either connective or neural tissues. Methods OCT volumes of the ONH were acquired from one eye of 10 healthy subjects. We processed all volumes with adaptive compensation to remove shadows and enhance deep tissue visibility. For each ONH, we identified the four most dissimilar pixel-intensity histograms, each of which was assumed to represent a tissue group. These four histograms formed a vector basis on which we ‘projected' each OCT volume in order to generate four digitally stained volumes P1 to P4. Digital staining was also verified using a digital phantom, and compared with k-means clustering for three and four clusters. Results Digital staining was able to isolate three regions of interest from the proposed phantom. For the ONH, the digitally stained images P1 highlighted mostly connective tissues, as demonstrated through an excellent contrast increase across the anterior lamina cribrosa boundary (3.6 ± 0.6 times). P2 highlighted the nerve fiber layer and the prelamina, P3 the remaining layers of the retina, and P4 the image background. Further, digital staining was able to separate ONH tissue layers that were not well separated by k-means clustering. Conclusion We have described an algorithm that can digitally stain connective and neural tissues in OCT images of the ONH. Translational Relevance Because connective and neural tissues are considerably altered in glaucoma, digital staining of the ONH tissues may be of interest in the clinical management of this pathology. PMID:28174676

  12. Theoretical foundations for joint digital-optical analysis of electro-optical imaging systems.

    PubMed

    Stork, David G; Robinson, M Dirk

    2008-04-01

    We describe the mathematical and conceptual foundations for a novel methodology for jointly optimizing the design and analysis of the optics, detector, and digital image processing for imaging systems. Our methodology is based on the end-to-end merit function of predicted average pixel sum-squared error to find the optical and image processing parameters that minimize this merit function. Our approach offers several advantages over the traditional principles of optical design, such as improved imaging performance, expanded operating capabilities, and improved as-built performance.

  13. Optical synchrotron radiation beam imaging with a digital mask

    SciTech Connect

    Zhang, Hao; Fiorito, Ralph; Corbett, Jeff; Shkvarunets, Anatoly; Tian, Kai; Fisher, Alan; Douglas, D.; Wilson, F.; Zhang, S.; Mok, W.; Mitsuhashi, T.

    2016-01-01

    The 3GeV SPEAR3 synchrotron light source operates in top-up injection mode with up to 500mA circulating in the storage ring (equivalently 392nC). Each injection pulse contains only 40-80 pC producing a contrast ratio between total stored charge and injected charge of about 6500:1. In order to study transient injected beam dynamics during User operations, it is desirable to optically image the injected pulse in the presence of the bright stored beam. In the present work this is done by re-imaging visible synchrotron radiation onto a digital micro-mirror-array device (DMD), which is then used as an optical mask to block out light from the bright central core of the stored beam. The physical masking, together with an asynchronously-gated, ICCD imaging camera makes it is possible to observe the weak injected beam component on a turn-by-turn basis. The DMD optical masking system works similar to a classical solar coronagraph but has some distinct practical advantages: i.e. rapid adaption to changes in the shape of the stored beam, high extinction ratio for unwanted light and minimum scattering from the primary beam into the secondary optics. In this paper we describe the DMD masking method, features of the high dynamic range point spread function for the SPEAR3 optical beam line and measurements of the injected beam in the presence of the stored beam.

  14. Time-domain optical coherence tomography with digital holographic microscopy

    NASA Astrophysics Data System (ADS)

    Massatsch, Pia; Charrière, Florian; Cuche, Etienne; Marquet, Pierre; Depeursinge, Christian D.

    2005-04-01

    We show that digital holography can be combined easily with optical coherence tomography approach. Varying the reference path length is the means used to acquire a series of holograms at different depths, providing after reconstruction images of slices at different depths in the specimen thanks to the short-coherence length of light source. A metallic object, covered by a 150-µm-thick onion cell, is imaged with high resolution. Applications in ophthalmology are shown: structures of the anterior eye, the cornea, and the iris, are studied on enucleated porcine eyes. Tomographic images of the iris border close to the pupil were obtained 165 µm underneath the eye surface.

  15. Photodimerization in dipeptides for high capacity optical digital storage

    SciTech Connect

    Ramanujam, P.S.; Berg, Rolf H.

    2004-09-06

    We have developed peptide materials with chromophores that undergo cycloaddition, suitable for terabit optical digital storage in a 5.25 in. disc. The rationale behind this design is that the length and rigidity of the backbone can be adjusted to facilitate the formation of a photodimer without large physical movements of the chromophores on exposure to UV light. Initially strongly absorbing films transmit up to 50% of light on irradiation at dimerizing wavelengths. This property can be utilized to record grey levels. An intensity-dependent transmission behavior has been observed that may enable data to be written and read at the same wavelength.

  16. Fourier transform digital holographic adaptive optics imaging system

    PubMed Central

    Liu, Changgeng; Yu, Xiao; Kim, Myung K.

    2013-01-01

    A Fourier transform digital holographic adaptive optics imaging system and its basic principles are proposed. The CCD is put at the exact Fourier transform plane of the pupil of the eye lens. The spherical curvature introduced by the optics except the eye lens itself is eliminated. The CCD is also at image plane of the target. The point-spread function of the system is directly recorded, making it easier to determine the correct guide-star hologram. Also, the light signal will be stronger at the CCD, especially for phase-aberration sensing. Numerical propagation is avoided. The sensor aperture has nothing to do with the resolution and the possibility of using low coherence or incoherent illumination is opened. The system becomes more efficient and flexible. Although it is intended for ophthalmic use, it also shows potential application in microscopy. The robustness and feasibility of this compact system are demonstrated by simulations and experiments using scattering objects. PMID:23262541

  17. Single Element 2-DIMENSIONAL Acousto-Optic Deflectors Design, Fabrication and Implementation for Digital Optical Computing

    NASA Astrophysics Data System (ADS)

    Rosemeier, Jolanta Iwona

    1992-09-01

    With the need to develop very fast computers compared to the conventional digital chip based systems, the future is very bright for optical based signal processing. Attention has turned to a different application of optics utilizing mathematical operations, in which case operations are numerical, sometimes discrete, and often algebraic in nature. Interest has been so vigorous that many view it as a small revolution in optics whereby optical signal processing is beginning to encompass what many frequently describe as optical computing. The term is fully intended to imply close comparison with the operations performed by scientific digital computers. Most present computer intensive problem solving processors rely on a common set of linear equations found in numerical matrix algebra. Recently, considerable research focused on the use of systolic array, which can operate at high speeds with great efficiency. This approach addresses the acousto-optic digital and analog arrays utilizing three dimensional optical interconnect technology. In part I of this dissertation the first single element 2-dimensional (2-D) acousto-optic deflector was designed, fabricated and incorporated into an optical 3 x 3 vector-vector or matrix-matrix multiplier system. This single element deflector is used as a outer-product device. The input vectors are addressed by electronic means and the outer product matrix is displayed as a 2-D array of optical (laser) pixels. In part II of this work a multichannel single element 2-D deflector was designed, fabricated and implemented into a Programmable Logic Array (PLA) optical computing system. This system can be used for: word equality detection, free space optical interconnections, half adder optical system implementation. The PLA system described in this dissertation has capability of word equality detection. The 2-D multichannel deflector that was designed and fabricated is capable of comparing 16 x 16 words every 316 nanoseconds. Each word is 8

  18. Method for auto-alignment of digital optical phase conjugation systems based on digital propagation

    PubMed Central

    Jang, Mooseok; Ruan, Haowen; Zhou, Haojiang; Judkewitz, Benjamin; Yang, Changhuei

    2014-01-01

    Optical phase conjugation (OPC) has enabled many optical applications such as aberration correction and image transmission through fiber. In recent years, implementation of digital optical phase conjugation (DOPC) has opened up the possibility of its use in biomedical optics (e.g. deep-tissue optical focusing) due to its ability to provide greater-than-unity OPC reflectivity (the power ratio of the phase conjugated beam and input beam to the OPC system) and its flexibility to accommodate additional wavefront manipulations. However, the requirement for precise (pixel-to-pixel matching) alignment of the wavefront sensor and the spatial light modulator (SLM) limits the practical usability of DOPC systems. Here, we report a method for auto-alignment of a DOPC system by which the misalignment between the sensor and the SLM is auto-corrected through digital light propagation. With this method, we were able to accomplish OPC playback with a DOPC system with gross sensor-SLM misalignment by an axial displacement of up to~1.5 cm, rotation and tip/tilt of ~5∘, and in-plane displacement of ~5 mm (dependent on the physical size of the sensor and the SLM). Our auto-alignment method robustly achieved a DOPC playback peak-to-background ratio (PBR) corresponding to more than ~30 % of the theoretical maximum. As an additional advantage, the auto-alignment procedure can be easily performed at will and, as such, allows us to correct for small mechanical drifts within the DOPC systems, thus overcoming a previously major DOPC system vulnerability. We believe that this reported method for implementing robust DOPC systems will broaden the practical utility of DOPC systems. PMID:24977504

  19. Lifetime of digital media: is optics the solution?

    NASA Astrophysics Data System (ADS)

    Spitz, Erich; Hourcade, Jean-Charles; Lalo", Franck

    2010-01-01

    While the short term and mid-term archiving of digital data and information can be handled reasonably well with modern techniques, the long term aspects of the problem (several decades or even centuries) are much more difficult to manage. The heart of the problem is the longevity of storage media, which presently does not go beyond a few years, maybe one or two decades in the best cases. In this article, we review the various strategies for long term archiving, with two main categories: active and passive. We evaluate the various recording media in terms of their longevity. We then discuss the recordable optical digital disks (RODDs) and the state of the art in this domain; the present situation is that, with the techniques that are implemented commercially, good prospects for long term archiving are not available. Nevertheless, the conceptual simplicity of RODDs could be exploited to create new recordable digital media; the improvements that are needed seem to be reachable with reasonable development effort. Since RODDs are now in strong competition with other systems (hard disks or flash memory for instance) that constantly make enormous progress, there seems to be little hope to see RODDs win the race of capacity; nevertheless, longevity could provide them with a new market, since the need for long term archiving is so pressing everywhere in the world.

  20. Phase aberration correction by correlation in digital holographic adaptive optics

    PubMed Central

    Liu, Changgeng; Yu, Xiao; Kim, Myung K.

    2013-01-01

    We present a phase aberration correction method based on the correlation between the complex full-field and guide-star holograms in the context of digital holographic adaptive optics (DHAO). Removal of a global quadratic phase term before the correlation operation plays an important role in the correction. Correlation operation can remove the phase aberration at the entrance pupil plane and automatically refocus the corrected optical field. Except for the assumption that most aberrations lie at or close to the entrance pupil, the presented method does not impose any other constraints on the optical systems. Thus, it greatly enhances the flexibility of the optical design for DHAO systems in vision science and microscopy. Theoretical studies show that the previously proposed Fourier transform DHAO (FTDHAO) is just a special case of this general correction method, where the global quadratic phase term and a defocus term disappear. Hence, this correction method realizes the generalization of FTDHAO into arbitrary DHAO systems. The effectiveness and robustness of this method are demonstrated by simulations and experiments. PMID:23669707

  1. Focusing through dynamic tissue with millisecond digital optical phase conjugation

    PubMed Central

    Wang, Daifa; Zhou, Edward Haojiang; Brake, Joshua; Ruan, Haowen; Jang, Mooseok; Yang, Changhuei

    2015-01-01

    Digital optical phase conjugation (DOPC) is a new technique employed in wavefront shaping and phase conjugation for focusing light through or within scattering media such as biological tissues. DOPC is particularly attractive as it intrinsically achieves a high fluence reflectivity in comparison to nonlinear optical approaches. However, the slow refresh rate of liquid crystal spatial light modulators and limitations imposed by computer data transfer speeds have thus far made it difficult for DOPC to achieve a playback latency of shorter than ~200 ms and, therefore, prevented DOPC from being practically applied to thick living samples. In this paper, we report a novel DOPC system that is capable of 5.3 ms playback latency. This speed improvement of almost 2 orders of magnitude is achieved by using a digital micromirror device, field programmable gate array (FPGA) processing, and a single-shot binary phase retrieval technique. With this system, we are able to focus through 2.3 mm living mouse skin with blood flowing through it (decorrelation time ~30 ms) and demonstrate that the focus can be maintained indefinitely—an important technological milestone that has not been previously reported, to the best of our knowledge. PMID:26677458

  2. Phase resolved digital signal processing in optical coherence tomography

    NASA Astrophysics Data System (ADS)

    de Boer, Johannes F.; Tripathi, Renu; Park, Boris H.; Nassif, Nader

    2002-06-01

    We present phase resolved digital signal processing techniques for Optical Coherence Tomography to correct for the non Gaussian shape of source spectra and for Group Delay Dispersion (GDD). A broadband source centered at 820 nm was synthesized by combining the spectra of two superluminescent diodes to improve axial image resolution in an optical coherence tomography (OCT) system. Spectral shaping was used to reduce the side lobes (ringing) in the axial point spread function due to the non-Gaussian shape of the spectra. Images of onion cells taken with each individual source and the combined sources, respectively, show the improved resolution and quality enhancement in a turbid biological sample. An OCT system operating at 1310 nm was used to demonstrate that the broadening effect of group delay dispersion (GDD) on the coherence function could be eliminated completely by introducing a quadratic phase shift in the Fourier domain of the interferometric signal. The technique is demonstrated by images of human skin grafts with group delay dispersion mismatch between sample and reference arm before and after digital processing.

  3. Closed-loop optical stabilization and digital image registration in adaptive optics scanning light ophthalmoscopy.

    PubMed

    Yang, Qiang; Zhang, Jie; Nozato, Koji; Saito, Kenichi; Williams, David R; Roorda, Austin; Rossi, Ethan A

    2014-09-01

    Eye motion is a major impediment to the efficient acquisition of high resolution retinal images with the adaptive optics (AO) scanning light ophthalmoscope (AOSLO). Here we demonstrate a solution to this problem by implementing both optical stabilization and digital image registration in an AOSLO. We replaced the slow scanning mirror with a two-axis tip/tilt mirror for the dual functions of slow scanning and optical stabilization. Closed-loop optical stabilization reduced the amplitude of eye-movement related-image motion by a factor of 10-15. The residual RMS error after optical stabilization alone was on the order of the size of foveal cones: ~1.66-2.56 μm or ~0.34-0.53 arcmin with typical fixational eye motion for normal observers. The full implementation, with real-time digital image registration, corrected the residual eye motion after optical stabilization with an accuracy of ~0.20-0.25 μm or ~0.04-0.05 arcmin RMS, which to our knowledge is more accurate than any method previously reported.

  4. Digital Diffractive Optics: An Introduction to Planar Diffractive Optics and Related Technology

    NASA Astrophysics Data System (ADS)

    Kress, B.; Meyrueis, P.

    2000-10-01

    Diffractive optical elements (DOEs) are becoming more and more widely used in a braod range of fields, including telecommunications, optical computing, consumer electronics, laser material processing and the biomedical sciences, to manipulate light through micro-optical systems. In order to get the most out of such DOEs, knowledge of the design process, fabrication, packaging in a particular system, and operation is required. Digital Diffractive Optics discusses in detail the design and simulation of DOEs, before considering the main fabrication techniques. The increasingly important CAD/CAM tool requirements for the production of DOEs are covered, and a chapter is devoted to the crucial area of systematic fabrication error compensation. Finally, the integration and use of DOEs in a number of different systems, including various opto-electronic and opto-mechanical systems, are discussed. Digital Diffractive Optics will be of great interest to all those involved in the fields of optical engineering and photonics. It presents a clear view of the whole process, from design to fabrication and application, without overstressing the, often complex, mathematics, and will thus be accessible to postgraduate students and those entering the field, as well as more experienced engineers and scientists.

  5. Closed-loop optical stabilization and digital image registration in adaptive optics scanning light ophthalmoscopy

    PubMed Central

    Yang, Qiang; Zhang, Jie; Nozato, Koji; Saito, Kenichi; Williams, David R.; Roorda, Austin; Rossi, Ethan A.

    2014-01-01

    Eye motion is a major impediment to the efficient acquisition of high resolution retinal images with the adaptive optics (AO) scanning light ophthalmoscope (AOSLO). Here we demonstrate a solution to this problem by implementing both optical stabilization and digital image registration in an AOSLO. We replaced the slow scanning mirror with a two-axis tip/tilt mirror for the dual functions of slow scanning and optical stabilization. Closed-loop optical stabilization reduced the amplitude of eye-movement related-image motion by a factor of 10–15. The residual RMS error after optical stabilization alone was on the order of the size of foveal cones: ~1.66–2.56 μm or ~0.34–0.53 arcmin with typical fixational eye motion for normal observers. The full implementation, with real-time digital image registration, corrected the residual eye motion after optical stabilization with an accuracy of ~0.20–0.25 μm or ~0.04–0.05 arcmin RMS, which to our knowledge is more accurate than any method previously reported. PMID:25401030

  6. Signal digitizing system and method based on amplitude-to-time optical mapping

    DOEpatents

    Chou, Jason; Bennett, Corey V; Hernandez, Vince

    2015-01-13

    A signal digitizing system and method based on analog-to-time optical mapping, optically maps amplitude information of an analog signal of interest first into wavelength information using an amplitude tunable filter (ATF) to impress spectral changes induced by the amplitude of the analog signal onto a carrier signal, i.e. a train of optical pulses, and next from wavelength information to temporal information using a dispersive element so that temporal information representing the amplitude information is encoded in the time domain in the carrier signal. Optical-to-electrical conversion of the optical pulses into voltage waveforms and subsequently digitizing the voltage waveforms into a digital image enables the temporal information to be resolved and quantized in the time domain. The digital image may them be digital signal processed to digitally reconstruct the analog signal based on the temporal information with high fidelity.

  7. Optical geometry calibration method for free-form digital tomosynthesis

    NASA Astrophysics Data System (ADS)

    Chtcheprov, Pavel; Hartman, Allison; Shan, Jing; Lee, Yueh Z.; Zhou, Otto; Lu, Jianping

    2016-03-01

    Digital tomosynthesis is a type of limited angle tomography that allows 3D information to be reconstructed from a set of x-ray projection images taken at various angles using an x-ray tube, a mechanical arm to rotate the tube about the object, and a digital detector. Tomosynthesis reconstruction requires the precise location of the detector with respect to each x-ray source, forcing all current clinical tomosynthesis systems to use a physically coupled source and detector so the geometry is always known and is always the same. This limits the imaging geometries and its large size is impractical for mobile or field operations. To counter this, we have developed a free form tomosynthesis with a decoupled, free-moving source and detector that uses a novel optical method for accurate and real-time geometry calibration to allow for manual, hand-held tomosynthesis and even CT imaging. We accomplish this by using a camera, attached to the source, to track the motion of the source relative to the detector. Attached to the detector is an optical pattern and the image captured by the camera is then used to determine the relative camera/pattern position and orientation by analyzing the pattern distortion and calculating the source positions for each projection, necessary for 3D reconstruction. This allows for portable imaging in the field and also as an inexpensive upgrade to existing 2D systems, such as in developing countries, to provide 3D image data. Here we report the first feasibility demonstrations of free form digital tomosynthesis systems using the method.

  8. An Optical Tomography System Using a Digital Signal Processor

    PubMed Central

    Rahim, Ruzairi Abdul; Thiam, Chiam Kok; Fazalul Rahiman, Mohd Hafiz

    2008-01-01

    The use of a personal computer together with a Data Acquisition System (DAQ) as the processing tool in optical tomography systems has been the norm ever since the beginning of process tomography. However, advancements in silicon fabrication technology allow nowadays the fabrication of powerful Digital Signal Processors (DSP) at a reasonable cost. This allows this technology to be used in an optical tomography system since data acquisition and processing can be performed within the DSP. Thus, the dependency on a personal computer and a DAQ to sample and process the external signals can be reduced or even eliminated. The DSP system was customized to control the data acquisition process of 16×16 optical sensor array, arranged in parallel beam projection. The data collected was used to reconstruct the cross sectional image of the pipeline conveyor. For image display purposes, the reconstructed image was sent to a personal computer via serial communication. This allows the use of a laptop to display the tomogram image besides performing any other offline analysis. PMID:27879811

  9. An Optical Tomography System Using a Digital Signal Processor.

    PubMed

    Rahim, Ruzairi Abdul; Thiam, Chiam Kok; Rahiman, Mohd Hafiz Fazalul

    2008-03-27

    The use of a personal computer together with a Data Acquisition System (DAQ) as the processing tool in optical tomography systems has been the norm ever since the beginning of process tomography. However, advancements in silicon fabrication technology allow nowadays the fabrication of powerful Digital Signal Processors (DSP) at a reasonable cost. This allows this technology to be used in an optical tomography system since data acquisition and processing can be performed within the DSP. Thus, the dependency on a personal computer and a DAQ to sample and process the external signals can be reduced or even eliminated. The DSP system was customized to control the data acquisition process of 16x16 optical sensor array, arranged in parallel beam projection. The data collected was used to reconstruct the cross sectional image of the pipeline conveyor. For image display purposes, the reconstructed image was sent to a personal computer via serial communication. This allows the use of a laptop to display the tomogram image besides performing any other offline analysis.

  10. High-speed digital fiber optic links for satellite traffic

    NASA Technical Reports Server (NTRS)

    Daryoush, A. S.; Ackerman, E.; Saedi, R.; Kunath, R. R.; Shalkhauser, K.

    1989-01-01

    Large aperture phased array antennas operating at millimeter wave frequencies are designed for space-based communications and imaging platforms. Array elements are comprised of active T/R modules which are linked to the central processing unit through high-speed fiber-optic networks. The system architecture satisfying system requirements at millimeter wave frequency is T/R level data mixing where data and frequency reference signals are distributed independently before mixing at the T/R modules. This paper demonstrates design procedures of a low loss high-speed fiber-optic link used for transmission of data signals over 600-900 MHz bandwidth inside satellite. The fiber-optic link is characterized for transmission of analog and digital data. A dynamic range of 79 dB/MHz was measured for analog data over the bandwidth. On the other hand, for bursted SMSK satellite traffic at 220 Mbps rates, BER of 2 x 10 to the -7th was measured for E(b)/N(o) of 14.3 dB.

  11. High-speed digital fiber optic links for satellite traffic

    NASA Astrophysics Data System (ADS)

    Daryoush, A. S.; Ackerman, E.; Saedi, R.; Kunath, R. R.; Shalkhauser, K.

    1989-09-01

    Large aperture phased array antennas operating at millimeter wave frequencies are designed for space-based communications and imaging platforms. Array elements are comprised of active T/R modules which are linked to the central processing unit through high-speed fiber-optic networks. The system architecture satisfying system requirements at millimeter wave frequency is T/R level data mixing where data and frequency reference signals are distributed independently before mixing at the T/R modules. This paper demonstrates design procedures of a low loss high-speed fiber-optic link used for transmission of data signals over 600-900 MHz bandwidth inside satellite. The fiber-optic link is characterized for transmission of analog and digital data. A dynamic range of 79 dB/MHz was measured for analog data over the bandwidth. On the other hand, for bursted SMSK satellite traffic at 220 Mbps rates, BER of 2 x 10 to the -7th was measured for E(b)/N(o) of 14.3 dB.

  12. Fiber-optic projected-fringe digital interferometry

    NASA Technical Reports Server (NTRS)

    Mercer, Carolyn R.; Beheim, Glenn

    1990-01-01

    A phase-stepped projected-fringe interferometer was developed which uses a closed-loop fiber-optic phase-control system to make very accurate surface profile measurements. The closed-loop phase-control system greatly reduces phase-stepping error, which is frequently the dominant source of error in digital interferometers. Two beams emitted from a fiber-optic coupler are combined to form an interference fringe pattern on a diffusely reflecting object. Reflections off of the fibers' output faces are used to create a phase-indicating signal for the closed-loop optical phase controller. The controller steps the phase difference between the two beams by pi/2 radians in order to determine the object's surface profile using a solid-state camera and a computer. The system combines the ease of alignment and automated data reduction of phase-stepping projected-fringe interferometry with the greatly improved phase-stepping accuracy of our closed-loop phase-controller. The system is demonstrated by measuring the profile of a plate containing several convex surfaces whose heights range from 15 to 25 micron high.

  13. Digital signal processing techniques for coherent optical communication

    NASA Astrophysics Data System (ADS)

    Goldfarb, Gilad

    Coherent detection with subsequent digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in various fiber-optic transmission scenarios. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservaton of full information of the incoming field. These benefits include high receiver sensitivity, the ability to achieve high spectral-efficiency and the use of advanced modulation formats. With the immense advancements in DSP speeds, many of the problems hindering the use of coherent detection in optical transmission systems have been eliminated. Most notably, DSP alleviates the need for hardware phase-locking and polarization tracking, which can now be achieved in the digital domain. The complexity previously associated with coherent detection is hence significantly diminished and coherent detection is once gain considered a feasible detection alternative. In this thesis, several aspects of coherent detection (with or without subsequent DSP) are addressed. Coherent detection is presented as a means to extend the dispersion limit of a duobinary signal using an analog decision-directed phase-lock loop. Analytical bit-error ratio estimation for quadrature phase-shift keying signals is derived. To validate the promise for high spectral efficiency, the orthogonal-wavelength-division multiplexing scheme is suggested. In this scheme the WDM channels are spaced at the symbol rate, thus achieving the spectral efficiency limit. Theory, simulation and experimental results demonstrate the feasibility of this approach. Infinite impulse response filtering is shown to be an efficient alternative to finite impulse response filtering for chromatic dispersion compensation. Theory, design considerations, simulation and experimental results relating to this topic are presented. Interaction between fiber dispersion and nonlinearity remains the last major challenge

  14. Exploration of operator method digital optical computers for application to NASA

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Digital optical computer design has been focused primarily towards parallel (single point-to-point interconnection) implementation. This architecture is compared to currently developing VHSIC systems. Using demonstrated multichannel acousto-optic devices, a figure of merit can be formulated. The focus is on a figure of merit termed Gate Interconnect Bandwidth Product (GIBP). Conventional parallel optical digital computer architecture demonstrates only marginal competitiveness at best when compared to projected semiconductor implements. Global, analog global, quasi-digital, and full digital interconnects are briefly examined as alternative to parallel digital computer architecture. Digital optical computing is becoming a very tough competitor to semiconductor technology since it can support a very high degree of three dimensional interconnect density and high degrees of Fan-In without capacitive loading effects at very low power consumption levels.

  15. Some Protocols For Optical-Fiber Digital Communications

    NASA Technical Reports Server (NTRS)

    Yeh, Cavour; Gerla, Mario

    1989-01-01

    One works best in heavy traffic, another, in light traffic. Three protocols proposed for digital communications among stations connected by passive taps to pair of uni-directional optical-fiber buses. Mediate round-robin, bounded-delay access to buses by all stations and particularly suited to fast transmission. Partly because transmission medium passive (no relay stations) and partly because protocols distribute control of network among all stations with provision for addition and deletion of stations (no control stations), communication network able to resist and recover from failures. Implicit token propagates in one direction on one bus and in opposite direction on other bus, minimizing interval of silence between end of one round and beginning of next.

  16. QAM quantum stream cipher using digital coherent optical transmission.

    PubMed

    Nakazawa, Masataka; Yoshida, Masato; Hirooka, Toshihiko; Kasai, Keisuke

    2014-02-24

    A Quantum Stream Cipher (QSC) using Quadrature Amplitude Modulation (QAM) is presented to greatly increase the secure degree compared with ASK or PSK/QSC. We propose encoding multi-bit data in one symbol with a multi-bit basis state, resulting in QAM/QSC, which employs amplitude and phase encryption of the light beam simultaneously. A 16 QAM/QSC experiment at 10 Gbit/s was successfully carried out over 160 km using a digital coherent optical transmission technique, where 16 QAM data were encrypted in a constellation with 32 × 32~4096 × 4096 symbols. We show experimentally that the Number of Masked Signals (NMS) in the quantum noise Γ(QAM) for QAM/QSC becomes a square multiple larger than Γ(ASK) for ASK/QSC. Γ(QAM) exceeds 10,000. This result indicates that the QSC technique is more robust against eavesdroppers than ASK or PSK/QSC.

  17. Intraoperative localization using a three-dimensional optical digitizer

    NASA Astrophysics Data System (ADS)

    Bucholz, Richard D.; Smith, Kurt R.; Henderson, Jaimie M.; McDurmont, Lee L.; Schulze, Dean W.

    1993-09-01

    Frame based stereotactic surgery allows the surgeon to precisely approach a predetermined target. Although useful for diagnostic and functional procedures, mechanical instruments fail to indicate position quickly during open craniotomy. We have developed a system employing an infrared optical digitizer to indicate position on either CT, MRI, or PET scans. The system consists of a base ring attached to the patient's head during surgery, hand held instruments of any type, a camera array, and a computer display. Light emitting diodes on the instruments and head ring are tracked by three linear CCDs suspended over the surgical field. The position of the surgical instrument relative to the patient's head is computed by a personal computer. Surgical position is indicated on an individual CT, MRI, or PET slice. A graphics workstation provides three dimensional display of position.

  18. Optical-digital-neural network system for aided target recognition

    NASA Astrophysics Data System (ADS)

    Farr, Keith B.; Hartman, Richard L.

    1995-07-01

    Many military systems have a critical need for aided target recognition, or cuing. This includes several systems with wide field-of-view search missions such as the UAV, EFOG-M, and Comanche. This report discusses one new approach: a multiple region of interest processor based on diffraction pattern sampling and digital neural network processing. In this concept an optical system segments the image into multiple, rectangular regions of interest and in parallel converts each ROI, be it visible, IR, or radar, to a spatial frequency power spectrum and samples that spectrum for 64 features. A neural network learns to correlate those features with target classes or identifications. A digital system uses the network weights to recognize unknown targets. The research discussed in this report using a single ROI processor showed a very high level of performance. Out of 1024 trials with models of five targets of F- 14, F-18, HIND, SCUD, and M1 tanks, there were 1023 correct classifications and 1 incorrect classification. Out of 1514 trials with those images plus 490 real clutter scenes, there were 1514 correct decisions between target or no-target. Of the 1024 target detections, there were 1023 correct classifications. Out of 60 trials with low resolution IR images of real scenes, there were 60 correct decisions between target and no-target. Of the 40 target detections, there were 40 correct classifications.

  19. Evaluation of a digital optical ionizing radiation particle track detector

    SciTech Connect

    Hunter, S.R.

    1987-06-01

    An ionizing radiation particle track detector is outlined which can, in principle, determine the three-dimensional spatial distribution of all the secondary electrons produced by the passage of ionizing radiation through a low-pressure (0.1 to 10 kPa) gas. The electrons in the particle track are excited by the presence of a high-frequency AC electric field, and two digital cameras image the optical radiation produced in electronic excitation collisions of the surroundings gas by the electrons. The specific requirements of the detector for neutron dosimetry and microdosimetry are outlined (i.e., operating conditions of the digital cameras, high voltage fields, gas mixtures, etc.) along with an estimate of the resolution and sensitivity achievable with this technique. The proposed detector is shown to compare favorable with other methods for obtaining the details of the track structure, particularly in the quality of the information obtainable about the particle track and the comparative simplicity and adaptability of the detector for measuring the secondary electron track structure for many forms of ionizing radiation over a wide range of energies.

  20. Coherent detection and digital signal processing for fiber optic communications

    NASA Astrophysics Data System (ADS)

    Ip, Ezra

    The drive towards higher spectral efficiency in optical fiber systems has generated renewed interest in coherent detection. We review different detection methods, including noncoherent, differentially coherent, and coherent detection, as well as hybrid detection methods. We compare the modulation methods that are enabled and their respective performances in a linear regime. An important system parameter is the number of degrees of freedom (DOF) utilized in transmission. Polarization-multiplexed quadrature-amplitude modulation maximizes spectral efficiency and power efficiency as it uses all four available DOF contained in the two field quadratures in the two polarizations. Dual-polarization homodyne or heterodyne downconversion are linear processes that can fully recover the received signal field in these four DOF. When downconverted signals are sampled at the Nyquist rate, compensation of transmission impairments can be performed using digital signal processing (DSP). Software based receivers benefit from the robustness of DSP, flexibility in design, and ease of adaptation to time-varying channels. Linear impairments, including chromatic dispersion (CD) and polarization-mode dispersion (PMD), can be compensated quasi-exactly using finite impulse response filters. In practical systems, sampling the received signal at 3/2 times the symbol rate is sufficient to enable an arbitrary amount of CD and PMD to be compensated for a sufficiently long equalizer whose tap length scales linearly with transmission distance. Depending on the transmitted constellation and the target bit error rate, the analog-to-digital converter (ADC) should have around 5 to 6 bits of resolution. Digital coherent receivers are naturally suited for the implementation of feedforward carrier recovery, which has superior linewidth tolerance than phase-locked loops, and does not suffer from feedback delay constraints. Differential bit encoding can be used to prevent catastrophic receiver failure due

  1. Digital image correlation-based optical coherence elastography.

    PubMed

    Sun, Cuiru; Standish, Beau; Vuong, Barry; Wen, Xiao-Yan; Yang, Victor

    2013-12-01

    Optical coherence elastography (OCE) provides deformation or material properties, mapping of soft tissue. We aim to develop a robust speckle tracking OCE technique with improved resolution and accuracy. A digital image correlation (DIC)-based OCE technique was developed by combining an advanced DIC algorithm with optical coherence tomography (OCT). System calibration and measurement error evaluation demonstrated that this DIC-based OCE technique had a resolution of ~0.6 μm displacement and <0.5% strain measurement in the axial scan direction. The measured displacement ranged from 0.6 to 150 μm, obtained via phantom imaging. The capability of the DIC-based OCE technique, for differentiation of stiffness, was evaluated by imaging a candle gel phantom with an irregularly shaped stiff inclusion. OCE imaging of a chicken breast sample differentiated the fat, membrane, and muscle layers. Strain elastograms of an aneurysm sample showed heterogeneity of the tissue and clear contrast between the adventitia and media. These promising results demonstrated the capability of the DIC-based OCE for the characterization of the various components of the tissue sample. Further improvement of the system will be conducted to make this OCE technique a practical tool for measuring and differentiating material properties of soft tissue.

  2. Digital image correlation-based optical coherence elastography

    NASA Astrophysics Data System (ADS)

    Sun, Cuiru; Standish, Beau; Vuong, Barry; Wen, Xiao-Yan; Yang, Victor

    2013-12-01

    Optical coherence elastography (OCE) provides deformation or material properties, mapping of soft tissue. We aim to develop a robust speckle tracking OCE technique with improved resolution and accuracy. A digital image correlation (DIC)-based OCE technique was developed by combining an advanced DIC algorithm with optical coherence tomography (OCT). System calibration and measurement error evaluation demonstrated that this DIC-based OCE technique had a resolution of ˜0.6 μm displacement and <0.5% strain measurement in the axial scan direction. The measured displacement ranged from 0.6 to 150 μm, obtained via phantom imaging. The capability of the DIC-based OCE technique, for differentiation of stiffness, was evaluated by imaging a candle gel phantom with an irregularly shaped stiff inclusion. OCE imaging of a chicken breast sample differentiated the fat, membrane, and muscle layers. Strain elastograms of an aneurysm sample showed heterogeneity of the tissue and clear contrast between the adventitia and media. These promising results demonstrated the capability of the DIC-based OCE for the characterization of the various components of the tissue sample. Further improvement of the system will be conducted to make this OCE technique a practical tool for measuring and differentiating material properties of soft tissue.

  3. Optical Digital Parallel Truth-Table Look-Up Processing

    NASA Astrophysics Data System (ADS)

    Mirsalehi, Mir Mojtaba

    During the last decade, a number of optical digital processors have been proposed that combine the parallelism and speed of optics with the accuracy and flexibility of a digital representation. In this thesis, two types of such processors (an EXCLUSIVE OR-based processor and a NAND-based processor) that function as content-addressable memories (CAM's) are analyzed. The main factors that affect the performance of the EXCLUSIVE OR-based processor are found to be the Gaussian nature of the reference beam and the finite square aperture of the crystal. A quasi-one-dimensional model is developed to analyze the effect of the Gaussian reference beam, and a circular aperture is used to increase the dynamic range in the output power. The main factors that affect the performance of the NAND-based processor are found to be the variations in the amplitudes and the relative phase of the laser beams during the recording process. A mathematical model is developed for analyzing the probability of error in the output of the processor. Using this model, the performance of the processor for some practical cases is analyzed. Techniques that have been previously used to reduce the number of reference patterns in a CAM include: using the residue number system and applying logical minimization methods. In the present work, these and additional techniques are investigated. A systematic procedure is developed for selecting the optimum set of moduli. The effect of coding is investigated and it is shown that multi-level coding, when used in conjunction with logical minimization techniques, significantly reduces the number of reference patterns. The Quine-McCluskey method is extended to multiple -valued logic and a computer program based on this extension is used for logical minimization. The results show that for moduli expressable as p('n), where p is a prime number and n is an integer greater than one, p-level coding provides significant reduction. The NAND-based processor is modified for

  4. Multimodal full-field optical coherence tomography on biological tissue: toward all optical digital pathology

    NASA Astrophysics Data System (ADS)

    Harms, F.; Dalimier, E.; Vermeulen, P.; Fragola, A.; Boccara, A. C.

    2012-03-01

    Optical Coherence Tomography (OCT) is an efficient technique for in-depth optical biopsy of biological tissues, relying on interferometric selection of ballistic photons. Full-Field Optical Coherence Tomography (FF-OCT) is an alternative approach to Fourier-domain OCT (spectral or swept-source), allowing parallel acquisition of en-face optical sections. Using medium numerical aperture objective, it is possible to reach an isotropic resolution of about 1x1x1 ìm. After stitching a grid of acquired images, FF-OCT gives access to the architecture of the tissue, for both macroscopic and microscopic structures, in a non-invasive process, which makes the technique particularly suitable for applications in pathology. Here we report a multimodal approach to FF-OCT, combining two Full-Field techniques for collecting a backscattered endogeneous OCT image and a fluorescence exogeneous image in parallel. Considering pathological diagnosis of cancer, visualization of cell nuclei is of paramount importance. OCT images, even for the highest resolution, usually fail to identify individual nuclei due to the nature of the optical contrast used. We have built a multimodal optical microscope based on the combination of FF-OCT and Structured Illumination Microscopy (SIM). We used x30 immersion objectives, with a numerical aperture of 1.05, allowing for sub-micron transverse resolution. Fluorescent staining of nuclei was obtained using specific fluorescent dyes such as acridine orange. We present multimodal images of healthy and pathological skin tissue at various scales. This instrumental development paves the way for improvements of standard pathology procedures, as a faster, non sacrificial, operator independent digital optical method compared to frozen sections.

  5. Studies in electromagnetic compatibility of optical and digital current and voltage transformers

    NASA Astrophysics Data System (ADS)

    Lebedev, V. D.; Yablokov, A. A.

    2017-02-01

    The use of microprocessor devices for relay protection and automation, devices for measuring and determining electric power quality permits the introduction and development of digital circuits leading from primary current and voltage transformers. The use of optical channels for digital circuits addresses the problem of offsetting electromagnetic interference and voltage shift. Creating optical and digital current and voltage transformers with digitization of signals already at high measuring transformer voltage is the best solution for the above problem of mechanical engineering in the field of electromagnetic compatibility of high voltage measuring transformers. However, a difficulty arises in ensuring electromagnetic compatibility of sensors and microelectronic equipment adjoining live parts. The present study is devoted to examining the impact of electromagnetic fields on sensors and solving the problems of electromagnetic compatibility of optical and digital current and voltage transformers.

  6. Optical design of cipher block chaining (CBC) encryption mode by using digital holography

    NASA Astrophysics Data System (ADS)

    Gil, Sang Keun; Jeon, Seok Hee; Jung, Jong Rae; Kim, Nam

    2016-03-01

    We propose an optical design of cipher block chaining (CBC) encryption by using digital holographic technique, which has higher security than the conventional electronic method because of the analog-type randomized cipher text with 2-D array. In this paper, an optical design of CBC encryption mode is implemented by 2-step quadrature phase-shifting digital holographic encryption technique using orthogonal polarization. A block of plain text is encrypted with the encryption key by applying 2-step phase-shifting digital holography, and it is changed into cipher text blocks which are digital holograms. These ciphered digital holograms with the encrypted information are Fourier transform holograms and are recorded on CCDs with 256 gray levels quantized intensities. The decryption is computed by these encrypted digital holograms of cipher texts, the same encryption key and the previous cipher text. Results of computer simulations are presented to verify that the proposed method shows the feasibility in the high secure CBC encryption system.

  7. Matrix-vector multiplication using digital partitioning for more accurate optical computing

    NASA Technical Reports Server (NTRS)

    Gary, C. K.

    1992-01-01

    Digital partitioning offers a flexible means of increasing the accuracy of an optical matrix-vector processor. This algorithm can be implemented with the same architecture required for a purely analog processor, which gives optical matrix-vector processors the ability to perform high-accuracy calculations at speeds comparable with or greater than electronic computers as well as the ability to perform analog operations at a much greater speed. Digital partitioning is compared with digital multiplication by analog convolution, residue number systems, and redundant number representation in terms of the size and the speed required for an equivalent throughput as well as in terms of the hardware requirements. Digital partitioning and digital multiplication by analog convolution are found to be the most efficient alogrithms if coding time and hardware are considered, and the architecture for digital partitioning permits the use of analog computations to provide the greatest throughput for a single processor.

  8. Navigation and Elctro-Optic Sensor Integration Technology for Fusion of Imagery and Digital Mapping Products

    DTIC Science & Technology

    1999-08-01

    Electro - Optic Sensor Integration Technology (NEOSIT) software application. The design is highly modular and based on COTS tools to facilitate integration with sensors, navigation and digital data sources already installed on different host

  9. Study of optical techniques for the Ames unitary wind tunnel: Digital image processing, part 6

    NASA Technical Reports Server (NTRS)

    Lee, George

    1993-01-01

    A survey of digital image processing techniques and processing systems for aerodynamic images has been conducted. These images covered many types of flows and were generated by many types of flow diagnostics. These include laser vapor screens, infrared cameras, laser holographic interferometry, Schlieren, and luminescent paints. Some general digital image processing systems, imaging networks, optical sensors, and image computing chips were briefly reviewed. Possible digital imaging network systems for the Ames Unitary Wind Tunnel were explored.

  10. The implementation of high speed digital PSD in optically pumping magnetometers

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Cheng, Defu; Zhou, Zhijian; Ma, Ming; Wang, Chao; Hu, Ruifan

    2017-01-01

    The 4He optically pumping magnetometer is a kind of high resolution instrument for measuring magnetic field intensity. Its response speed cannot meet the requirements in some experiments. By analyzing many factors, Phase Sensitive Detector (PSD) which is the key part of the lock-in amplifier processes data at a very slow speed is found. To improve its performance, this paper introduces a parallel digital phase sensitive detector based on coordinate rotation digital computer (CORDIC) algorithm. The cost time of the parallel digital phase sensitive detector is only 5.1% of the previous one. It can greatly enhance the response speed of the 4He optically pumping magnetometer.

  11. Hybrid (Optical/Electronic) Computing and Digital Computing

    DTIC Science & Technology

    1988-06-01

    n ............................................................................................................................ 3 2 . Hybrid ( Optical ...implementation of architectures of fully and hypercube interconnection topology. ’S. 2 . 11 brid ( Optical -Analog/’Electronic Mlicro-) Comiputer 2.1. Optical ...variant optical /electronic processor of Fig. 2 to detect the three parameters of a circle and the four parameters of an ellipse; the experimental

  12. Comparison of New Single-Use Digital Flexible Ureteroscope Versus Nondisposable Fiber Optic and Digital Ureteroscope in a Cadaveric Model

    PubMed Central

    Proietti, Silvia; Dragos, Laurian; Molina, Wilson; Doizi, Steeve; Giusti, Guido

    2016-01-01

    Abstract Purpose: To evaluate LithoVue, the new single-use digital flexible ureteroscope, in a human cadaveric model and compare it with a nondisposable fiber optic and digital flexible ureteroscopes. Materials and Methods: LithoVue, a conventional fiber optic, and digital flexible ureteroscopes were each tested in four renal units of recently deceased female cadavers by three surgeons. The following parameters were analyzed: accessibility to the kidney and navigation of the entire collecting system with and without ureteral access sheath (UAS), lower pole access measuring the deflection of the ureteroscope with the working channel empty, and with inside two different baskets and laser fibers. A subjective evaluation of maneuverability and visibility was assessed by each surgeon at the end of every procedure. Results: Kidney access into the Renal unit 1 was not possible without UAS for all ureteroscopes because of noncompliant ureter at the level of sacroiliac joint. The reusable digital ureteroscope was unable to reach one calix of the lower pole and one calix of the upper pole (Renal units 2 and 3) without UAS placement. Lower pole access with baskets and laser fibers was possible for each ureteroscope after UAS placement. No statistically significant differences were detected in angle deflection between ureteroscopes. The digital ureteroscope was preferred for visibility in all procedures: LithoVue for maneuverability in six procedures, fiber optic in five procedures, and the digital ureteroscope in one procedure. Conclusions: LithoVue seems to be comparable with conventional ureteroscopes in terms of visibility and manipulation into the collecting system in fresh human cadavers. Further studies in humans are needed to determine the clinical value of this new instrument. PMID:27084572

  13. Fourier-domain digital holographic optical coherence imaging of living tissue.

    PubMed

    Jeong, Kwan; Turek, John J; Nolte, David D

    2007-08-01

    Digital holographic optical coherence imaging is a full-frame coherence-gated imaging approach that uses a CCD camera to record and reconstruct digital holograms from living tissue. Recording digital holograms at the optical Fourier plane has advantages for diffuse targets compared with Fresnel off-axis digital holography. A digital hologram captured at the Fourier plane requires only a 2D fast Fourier transform for numerical reconstruction. We have applied this technique for the depth-resolved imaging of rat osteogenic tumor multicellular spheroids and acquired cross-section images of the anterior segment and the retinal region of a mouse eye. A penetration depth of 1.4 mm for the tumor spheroids was achieved.

  14. Optical implementation of cipher block chaining mode algorithm using phase-shifting digital holography

    NASA Astrophysics Data System (ADS)

    Jeon, Seok-Hee; Gil, Sang-Keun

    2016-12-01

    We propose an optical design of cipher block chaining (CBC) encryption mode using digital holography, which is implemented by the two-step quadrature phase-shifting digital holographic encryption technique using orthogonal polarization. A block of plain text is encrypted with the encryption key by applying the two-step phase-shifting digital holographic method; then, it is changed into cipher text blocks which are digital holograms. Optically, these digital holograms with the encrypted information are Fourier transform holograms and are recorded onto charge-coupled devices with 256 quantization gray levels. This means that the proposed optical CBC encryption is a scheme that has an analog-type of pseudorandom pattern information in the cipher text, while the conventional electronic CBC encryption is a kind of bitwise block message encryption processed by digital bits. Also, the proposed method enables the cryptosystem to have higher security strength and faster processing than the conventional electronic method because of the large two-dimensional (2-D) array key space and parallel processing. The results of computer simulations verify that the proposed optical CBC encryption design is very effective in CBC mode due to fast and secure optical encryption of 2-D data and shows the feasibility for the CBC encryption mode.

  15. Wavelet image processing applied to optical and digital holography: past achievements and future challenges

    NASA Astrophysics Data System (ADS)

    Jones, Katharine J.

    2005-08-01

    The link between wavelets and optics goes back to the work of Dennis Gabor who both invented holography and developed Gabor decompositions. Holography involves 3-D images. Gabor decompositions involves 1-D signals. Gabor decompositions are the predecessors of wavelets. Wavelet image processing of holography, both optical holography and digital holography, will be examined with respect to past achievements and future challenges.

  16. Hybrid optical-digital encryption system based on wavefront coding paradigm

    NASA Astrophysics Data System (ADS)

    Konnik, Mikhail V.

    2012-04-01

    The wavefront coding is a widely used in the optical systems to compensate aberrations and increase the depth of field. This paper presents experimental results on application of the wavefront coding paradigm for data encryption. We use a synthesised diffractive optical element (DOE) to deliberately introduce a phase distortion during the images registration process to encode the acquired image. In this case, an optical convolution of the input image with the point spread function (PSF) of the DOE is registered. The encryption is performed optically, and is therefore is fast and secure. Since the introduced distortion is the same across the image, the decryption is performed digitally using deconvolution methods. However, due to noise and finite accuracy of a photosensor, the reconstructed image is degraded but still readable. The experimental results, which are presented in this paper, indicate that the proposed hybrid optical-digital system can be implemented as a portable device using inexpensive off-the-shelf components. We present the results of optical encryption and digital restoration with quantitative estimations of the images quality. Details of hardware optical implementation of the hybrid optical-digital encryption system are discussed.

  17. Concept annotation and search space decrement of digital photos using optical context information

    NASA Astrophysics Data System (ADS)

    Sinha, Pinaki; Jain, Ramesh

    2008-01-01

    A modern digital camera is not just a single sensor capturing light. It is an ensemble of different sensors which capture independent contextual information about the photo shooting event. This is stored as metadata in the image. In this paper, we demonstrate how the optical metadata (data related to the optics of the camera) can be retrieved, interpreted and used along with content information for organizing and indexing digital photos. Our model is based on the physics of vision and operation of a camera. We use our algorithm on images from personal photo albums. Our results show that the optical metadata improves annotation performance and decreases the search space for retrieval.

  18. Demonstration of a 3-bit optical digital-to-analog converter based on silicon microring resonators.

    PubMed

    Yang, Lin; Ding, Jianfeng; Chen, Qiaoshan; Zhou, Ping; Zhang, Fanfan; Zhang, Lei

    2014-10-01

    We propose an N-bit optical digital-to-analog converter based on silicon microring resonators (MRRs), which can transform an N-bit electrical digital signal to an optical analog signal. A 3-bit optical digital-to-analog convertor is fabricated as proof of concept through a CMOS-compatible process on a silicon-on-insulator platform. The silicon MRRs are modulated through the electric-field-induced carrier injection in forward biased PN junctions embedded in the ring waveguides. The electro-optical 3-dB bandwidths of the silicon MRRs are approximately 800 MHz. The device works well at a speed of 500  MSample/s under driving voltage swings of 0.75 V.

  19. Universal Michelson Gires-Tournois interferometer optical interleaver based on digital signal processing.

    PubMed

    Zhang, Juan; Yang, Xiaowei

    2010-03-01

    Optical interleavers based on Michelson Gires-Tournois interferometer (MGTI) with arbitrary cascaded reflectors for symmetrical or asymmetrical periodic frequency response with arbitrary duty cycles are defined as universal MGTI optical interleaver (UMGTIOI). It can significantly enhance flexibility and applicability of optical networks. A novel and simple method based on digital signal processing is proposed for the design of UMGTIOI. Different kinds of design examples are given to confirm effectiveness of the method.

  20. Shaping perfect optical vortex with amplitude modulated using a digital micro-mirror device

    NASA Astrophysics Data System (ADS)

    Zhang, Chonglei; Min, Changjun; Yuan, X.-C.

    2016-12-01

    We propose a technique to generate of perfect optical vortex (POV) via Fourier transformation of Bessel-Gauss (BG) beams through encoding of the amplitude of the optical field with binary amplitude digital micro-mirrors device (DMD). Furthermore, we confirm the correct phase patterns of the POV with the method of Mach-Zehnder interferometer. Our approach to generate the POV has the advantages that rapidly switch among the different modes, wide spectral regions and high energy tolerance. Since the POV possess propagation properties that not shape-invariant, we therefore suppose that our proposed approach will find potential applications in optical microscopy, optical fabrication, and optical communication.

  1. Systems, Devices, and Materials for Digital Optical Processing.

    NASA Astrophysics Data System (ADS)

    Title, Mark Alan

    The massive parallelism and flexibility of three -dimensional optical communication may allow the development of new parallel computers free from the constraints of planar electronic technology. To bring the optical computer from possibility to reality, however, requires technological and scientific development in new optical systems, devices, and materials. We present here research results in each of these areas. First described is a prototype optical information processing system using CdS/liquid crystal spatial light modulators for optical logic and memory. This system has been developed as the first step in the implementation of a fine-grained, globally-interconnected optical processing element array. Notable system features include the implementation of programmable electronic control and the analysis of the optical power distribution within the processor, both directly applicable to the design of new and more advanced optical information processing systems. Next presented is the design and initial performance data for a new spatial light modulator combining an array of silicon phototransistors with the electro-optic material (Pb,La)(Zr,Ti)O _3, opening new possibilities for "intelligent" optical logic, memory, and switching devices. Important to the optimal performance of this Si/PLZT device is the fabrication of embedded electrodes in the electro-optic material, reducing the device operating voltage and switching energy while improving the uniformity of the optical modulation. An extensive computer model of embedded electrode performance and details of the electrode fabrication by reactive ion beam etching and electroless Ni deposition are presented. Finally, in the area of optical materials development we present initial results in the RF magnetron deposition of electro -optic PLZT on r-plane sapphire. This work is important to the fabrication of a monolithic, Si/PLZT-on-sapphire spatial light modulator, promising superior performance to devices using

  2. A guiding light: spectroscopy on digital microfluidic devices using in-plane optical fibre waveguides.

    PubMed

    Choi, Kihwan; Mudrik, Jared M; Wheeler, Aaron R

    2015-09-01

    We present a novel method for in-plane digital microfluidic spectroscopy. In this technique, a custom manifold (.stl file available online as ESM) aligns optical fibres with a digital microfluidic device, allowing optical measurements to be made in the plane of the device. Because of the greater width vs thickness of a droplet on-device, the in-plane alignment of this technique allows it to outperform the sensitivity of vertical absorbance measurements on digital microfluidic (DMF) devices by ∼14×. The new system also has greater calibration sensitivity for thymol blue measurements than the popular NanoDrop system by ∼2.5×. The improvements in absorbance sensitivity result from increased path length, as well as from additional effects likely caused by liquid lensing, in which the presence of a water droplet between optical fibres increases fibre-to-fibre transmission of light by ∼2× through refraction and internal reflection. For interrogation of dilute samples, stretching of droplets using digital microfluidic electrodes and adjustment of fibre-to-fibre gap width allows absorbance path length to be changed on-demand. We anticipate this new digital microfluidic optical fibre absorbance and fluorescence measurement system will be useful for a wide variety of analytical applications involving microvolume samples with digital microfluidics.

  3. The VA-Cyberware lower limb prosthetics-orthotics optical laser digitizer.

    PubMed

    Houston, V L; Mason, C P; Beattie, A C; LaBlanc, K P; Garbarini, M; Lorenze, E J; Thongpop, C M

    1995-02-01

    Characterization of the residual limbs and limb segments of patients for prosthesis and orthosis design has principally been a subjective process, highly dependent upon the skill, level of training, and experience of the prosthetist/orthotist involved. Even with the application of computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies in prosthetics and orthotics, residual limb/limb segment characterization has remained substantially subjective and dependent upon prosthetist/orthotist skill, training, and experience. To eliminate the variations and errors that frequently occur because of this dependence, and to further quantify the patient measurement process, rehabilitation engineering researchers at the New York Department of Veterans Affairs Medical Center developed an optical laser digitizer for quantitative characterization of patients' residual limbs'/limb segments' spatial geometry and surface topography. The optical digitizer developed is described, and results of laboratory and clinical tests with the digitizer are presented. Examples showing the capability of the digitizer to accurately, rapidly, repeatably, and consistently capture the contours over the entire surfaces of the residual limbs of patients with below-knee (BK) and above-knee (AK) amputation, the lower limbs of orthotics patients, and the feet and ankles of pedorthics patients, are given. In addition, results of a comparative clinical study of optical digitization and standard prosthetics CAD plaster wrap cast electromechanical digitization of the residual limbs of subjects with BK and AK amputation are presented. The enhanced accuracy, repeatability, and consistency afforded by optical digitization are shown. Finally, areas for refinement of the optical digitizer's design, identified in the project's laboratory and clinical tests, are discussed.

  4. Development of Optical Pickup for Digital Versatile Disc Using Two-Wavelength-Integrated Laser Diode

    NASA Astrophysics Data System (ADS)

    Uchiyama, Mineharu; Ebihara, Takeshi; Omi, Kunio; Kitano, Hisashi; Hoshino, Isao; Mori, Kazushige

    2000-03-01

    A digital versatile disc (DVD)-and compact disc (CD)-compatible optical pickup using a two-wavelength-integrated laser diode (TWIN-LD) has been developed. The TWIN-LD has two emission points in one chip, one for the red laser beam to read out signals from DVDs and the other for the IR laser beam to read out signals from CDs that are arranged along the active layer. With the application of a TWIN-LD to the optical pickup, the necessity for four optical components, namely, a laser diode, photodetector, holographic optical element and dichroic prism, is avoided in comparison with conventional optical pickups. This paper discusses some key points for designing an optical system using a TWIN-LD, and the results of the experiments appling the optical system to an optical pickup 7.3 mm in height.

  5. Electro-optic Mach-Zehnder Interferometer based Optical Digital Magnitude Comparator and 1's Complement Calculator

    NASA Astrophysics Data System (ADS)

    Kumar, Ajay; Raghuwanshi, Sanjeev Kumar

    2016-06-01

    The optical switching activity is one of the most essential phenomena in the optical domain. The electro-optic effect-based switching phenomena are applicable to generate some effective combinational and sequential logic circuits. The processing of digital computational technique in the optical domain includes some considerable advantages of optical communication technology, e.g. immunity to electro-magnetic interferences, compact size, signal security, parallel computing and larger bandwidth. The paper describes some efficient technique to implement single bit magnitude comparator and 1's complement calculator using the concepts of electro-optic effect. The proposed techniques are simulated on the MATLAB software. However, the suitability of the techniques is verified using the highly reliable Opti-BPM software. It is interesting to analyze the circuits in order to specify some optimized device parameter in order to optimize some performance affecting parameters, e.g. crosstalk, extinction ratio, signal losses through the curved and straight waveguide sections.

  6. PREFACE: I International Scientific School Methods of Digital Image Processing in Optics and Photonics

    NASA Astrophysics Data System (ADS)

    Gurov, I. P.; Kozlov, S. A.

    2014-09-01

    The first international scientific school "Methods of Digital Image Processing in Optics and Photonics" was held with a view to develop cooperation between world-class experts, young scientists, students and post-graduate students, and to exchange information on the current status and directions of research in the field of digital image processing in optics and photonics. The International Scientific School was managed by: Saint Petersburg National Research University of Information Technologies, Mechanics and Optics (ITMO University) - Saint Petersburg (Russia) Chernyshevsky Saratov State University - Saratov (Russia) National research nuclear University "MEPHI" (NRNU MEPhI) - Moscow (Russia) The school was held with the participation of the local chapters of Optical Society of America (OSA), the Society of Photo-Optical Instrumentation Engineers (SPIE) and IEEE Photonics Society. Further details, including topics, committees and conference photos are available in the PDF

  7. Optical hybrid analog-digital signal processing based on spike processing in neurons

    NASA Astrophysics Data System (ADS)

    Fok, Mable P.; Tian, Yue; Rosenbluth, David; Deng, Yanhua; Prucnal, Paul R.

    2011-09-01

    Spike processing is one kind of hybrid analog-digital signal processing, which has the efficiency of analog processing and the robustness to noise of digital processing. When instantiated with optics, a hybrid analog-digital processing primitive has the potential to be scalable, computationally powerful, and have high operation bandwidth. These devices open up a range of processing applications for which electronic processing is too slow. Our approach is based on a hybrid analog/digital computational primitive that elegantly implements the functionality of an integrate-and-fire neuron using a Ge-doped non-linear optical fiber and off-the-shelf semiconductor devices. In this paper, we introduce our photonic neuron architecture and demonstrate the feasibility of implementing simple photonic neuromorphic circuits, including the auditory localization algorithm of the barn owl, which is useful for LIDAR localization, and the crayfish tail-flip escape response.

  8. Active flutter suppression using optical output feedback digital controllers

    NASA Technical Reports Server (NTRS)

    1982-01-01

    A method for synthesizing digital active flutter suppression controllers using the concept of optimal output feedback is presented. A convergent algorithm is employed to determine constrained control law parameters that minimize an infinite time discrete quadratic performance index. Low order compensator dynamics are included in the control law and the compensator parameters are computed along with the output feedback gain as part of the optimization process. An input noise adjustment procedure is used to improve the stability margins of the digital active flutter controller. Sample rate variation, prefilter pole variation, control structure variation and gain scheduling are discussed. A digital control law which accommodates computation delay can stabilize the wing with reasonable rms performance and adequate stability margins.

  9. Novel uninterruptible self-determinate hybrid high-speed multimedia fiber optic wireless secure digital network

    NASA Astrophysics Data System (ADS)

    Lindsey, Lonnie

    2000-08-01

    One key to successful digital battlespace management is communications management. HF, UHF, VHF, CDMA, and SATCOM assets are difficult and complex to manage, and the modern digital battlespace adds new dimensions by including high volume multimedia transmissions, high-speed broadband data, and hyper-spectral sensor data. This environment requires more than the traditional voice transport-based communications system. The future sanctuary-based communication hub model will benefit from a novel uninterruptible self-determinate high bandwidth fiber optic system.

  10. Precise digital demodulation for fiber optic interferometer sensors

    NASA Astrophysics Data System (ADS)

    Medvedev, Andrei; Berezhnoi, Andrei; Kudryashov, Aleksei; Liokumovich, Leonid

    2016-03-01

    Different methods are used in the interferometer sensors for target signal extraction. Digital technologies provide new opportunities for precise signal detection. We have developed the principle of signal demodulation using an additional harmonic phase modulation and digital signal processing. The principle allows implementation of processing algorithms using different ratios between modulation and discretization frequencies. The expressions allowing calculation of the phase difference using the inverse trigonometric functions were derived. The method was realized in LabVIEW programming environment and was demonstrated for various signal shapes.

  11. Digital timing recovery combined with adaptive equalization for optical coherent receivers

    NASA Astrophysics Data System (ADS)

    Zhou, Xian; Chen, Xue; Zhou, Weiqing; Fan, Yangyang; Zhu, Hai; Li, Zhiyu

    2009-11-01

    We propose a novel equalization and timing recovery scheme, which adds an adaptive butterfly-structured equalizer in an all-digital timing recovery loop, for polarization multiplexing (POLMUX) coherent receivers. It resolves an incompatible problem that digital equalizer requires the timing recovered (synchronous) signal and Gardner timing-error detection algorithm requires the equalized signal because of its small tolerance on dispersion. This joint module can complete synchronization, equalization and polarization de-multiplexing simultaneously without any extra computational cost. Finally, we demonstrate the good performance of the new scheme in a 112-Gbit/s POLMUX-NRZ-DQPSK digital optical coherent receiver.

  12. Joint digital-optical design of imaging systems for grayscale objects

    NASA Astrophysics Data System (ADS)

    Robinson, M. Dirk; Stork, David G.

    2008-09-01

    In many imaging applications, the objects of interest have broad range of strongly correlated spectral components. For example, the spectral components of grayscale objects such as media printed with black ink or toner are nearly perfectly correlated spatially. We describe how to exploit such correlation during the design of electro-optical imaging systems to achieve greater imaging performance and lower optical component cost. These advantages are achieved by jointly optimizing optical, detector, and digital image processing subsystems using a unified statistical imaging performance measure. The resulting optical systems have lower F# and greater depth-of-field than systems that do not exploit spectral correlations.

  13. Frequency division multiplexed microwave and baseband digital optical fiber link for phased array antennas

    NASA Astrophysics Data System (ADS)

    Heim, Peter J.; McClay, C. Phillip

    1990-05-01

    A frequency-division multiplexed optical fiber link is described in which microwave (1-8 GHz) and baseband digital (1-10 Mb/s) signals are combined electrically and transmitted through a direct-modulation microwave optical link. The microwave signal does not affect bit error rate (BER) performance of the Manchester-coded baseband digital data link. The baseband digital signal affects microwave signal quality by generating second-order intermodulation noise. The intermodulation noise power density is found to be proportional to both the microwave input power and the digital input power, enabling the system to be modeled as a mixer (AM modulator). The conversion loss for the digital signal is approximately 68 dB for a 1-GHz microwave signal and is highly dependent on the microwave frequency, reaching a minimum value of 41 dB at 4.5 GHz, corresponding to the laser diode relaxation oscillation frequency. It is shown that Manchester coding on the digital link places the intermodulation noise peak away from the microwave signal, preventing degradation of close-carrier phase noise (<1 kHz offset). A direct trade-off between intermodulation noise and digital link margin is developed to project system performance.

  14. Development of an undergraduate optics laboratory based on the analysis of digital images

    NASA Astrophysics Data System (ADS)

    Ramil, Alberto; López, Ana J.; Fiorucci, M. Paula; Vincitorio, Fabio

    2014-07-01

    The aim of this work is to present an experience based on the use of digital images and computer processing techniques for enhanced optics laboratory teaching aids. The use of digital images offers the possibility of analysing some phenomena quantitatively, which would be very difficult to do with the traditional equipment available in teaching labs. In order to obtain high quality teaching material, a number of practical aspects should be taken into account during the process of image acquisition and subsequent analysis. Examples of quantitative experiments are presented; they cover the usual topics at undergraduate level, both geometrical and physical optics and even spectral analysis of the light.

  15. DIGITAL RADIOGRAPHIC EVALUATION OF OPTICAL DENSITY OF PORCELAINS USED FOR FABRICATION OF INLAY/ONLAY PROSTHESIS

    PubMed Central

    CASTILHO, Julio Cezar de Melo; TAKESHITA, Wilton Mitsunari; dos SANTOS, Luis Roque de Araújo; de MORAES, Luiz Cesar; MEDICI, Edmundo; de MORAES, Mari Eli Leonelli

    2006-01-01

    The purpose of this article was to compare the mean value of optical density of four porcelains commonly used for fabrication of inlay/onlay prostheses using direct digital radiograph. The sample consisted of 20 2-mm thick porcelain specimens (measured by digital pachymeter): Empress (Ivoclair), Simbios (Degussa), Vita Omega 900 and Vitadur Alpha (Vita Zahnfabrik). The values of optical density of the specimens were expressed in millimeters aluminum equivalent (mm eq Al). The samples were X-rayed using two charge coupled devices (CCD) - RVG (Trophy) - Visualix (Gendex) and a phosphor plate system – Digora (Soredex). The optical density reading was performed with Image Tool 1.28 in a total of 110 measurements. Statistical analysis showed that there were statistically significant differences in all materials studied (p < 0.05) regardless of the radiographic system used. The highest optical density value was found for Omega 900 (1.8988 mmeqAl – Visualix – Gendex) and the lowest for Vitadur Alpha (0.8647 – Visualix – Gendex). Thus, the material presenting the highest degree of optical density was Omega 900, Empress and Simbios presented intermediate optical density values, Vitadur Alpha presented the lowest value, and the optical density of porcelains was not influenced by the digital radiography systems. PMID:19089024

  16. Digital optical phase conjugation for delivering two-dimensional images through turbid media.

    PubMed

    Hillman, Timothy R; Yamauchi, Toyohiko; Choi, Wonshik; Dasari, Ramachandra R; Feld, Michael S; Park, YongKeun; Yaqoob, Zahid

    2013-01-01

    Optical transmission through complex media such as biological tissue is fundamentally limited by multiple light scattering. Precise control of the optical wavefield potentially holds the key to advancing a broad range of light-based techniques and applications for imaging or optical delivery. We present a simple and robust digital optical phase conjugation (DOPC) implementation for suppressing multiple light scattering. Utilizing wavefront shaping via a spatial light modulator (SLM), we demonstrate its turbidity-suppression capability by reconstructing the image of a complex two-dimensional wide-field target through a highly scattering medium. Employing an interferometer with a Sagnac-like ring design, we successfully overcome the challenging alignment and wavefront-matching constraints in DOPC, reflecting the requirement that the forward- and reverse-propagation paths through the turbid medium be identical. By measuring the output response to digital distortion of the SLM write pattern, we validate the sub-wavelength sensitivity of the system.

  17. Design of illumination and projection optics for projectors with single digital micromirror devices.

    PubMed

    Chang, C M; Shieh, H P

    2000-07-01

    We present a new optical system design for a projector with a single digital micromirror device (Texas Instruments Digital Micromirror Device) that improves on previous designs in terms of optical efficiency, uniformity, and contrast while yielding a low-profile and compact system. A rod integrator is incorporated with a compact relay system to maximize light efficiency and to increase illumination uniformity. The uniformity achieved by the optimized optical system was calculated to be 94%. In addition, this unique light-separator design has dual output channels to increase the image contrast by steering the off-state light away from the projection lens. This projector design provides very efficient light utilization, and we discuss how the geometrical optical efficiency of the system can be boosted to approach the theoretical maximum.

  18. Broadband optical equalizer using fault tolerant digital micromirrors.

    PubMed

    Riza, Nabeel; Mughal, M Junaid

    2003-06-30

    For the first time, the design and demonstration of a near continuous spectral processing mode broadband equalizer is described using the earlier proposed macro-pixel spatial approach for multiwavelength fiber-optic attenuation in combination with a high spectral resolution broadband transmissive volume Bragg grating. The demonstrated design features low loss and low polarization dependent loss with broadband operation. Such an analog mode spectral processor can impact optical applications ranging from test and instrumentation to dynamic alloptical networks.

  19. Performance Characterization of Digital Optical Data Transfer Systems for Use in the Space Radiation Environment

    NASA Technical Reports Server (NTRS)

    Reed, Robert A.; Ladbury, Ray L.; Day, John H. (Technical Monitor)

    2000-01-01

    Radiation effects in photonic and microelectronic components can impact the performance of high-speed digital optical data link in a variety of ways. This segment of the short course focuses on radiation effects in digital optical data links operating in the MHz to GHz regime. (Some of the information is applicable to frequencies above and below this regime) The three basic component level effects that should be considered are Total Ionizing Dose (TID), Displacement Damage Dose (DDD) and Single Event Effects (SEE). In some cases the system performance degradation can be quantified from component level tests, while in others a more holistic characterization approach must be taken. In Section 2.0 of this segment of the Short Course we will give a brief overview of the space radiation environment follow by a summary of the basic space radiation effects important for microelectronics and photonics listed above. The last part of this section will give an example of a typical mission radiation environment requirements. Section 3.0 gives an overview of intra-satellite digital optical data link systems. It contains a discussion of the digital optical data link and it's components. Also, we discuss some of the important system performance metrics that are impacted by radiation effects degradation of optical and optoelectronic component performance. Section 4.0 discusses radiation effects in optical and optoelectronic components. While each component effect will be discussed, the focus of this section is on degradation of passive optical components and SEE in photodiodes (other mechanisms are covered in segment II of this short course entitled "Photonic Devices with Complex and Multiple Failure Modes"). Section 5.0 will focus on optical data link system response to the space radiation environment. System level SEE ground testing will be discussed. Then we give a discussion of system level assessment of data link performance when operating in the space radiation environment.

  20. Optical security features by using information carrier digital screening

    NASA Astrophysics Data System (ADS)

    Koltai, Ferenc

    2002-04-01

    Jura is an Austrian-Hungarian company providing security printers with proprietary security printing design software, complete security printing pre=press systems (HW + SW), ultrahigh resolution image setters developed for security printing market, security features, developed by Jura for security printing in general, proprietary security features, destined for document personalization systems. In addition to supply such products Jura is providing its customers with full technical support, as integration, installation, training, hot-line remote and/or on-site support, service and maintenance worldwide. Research and development have always been in the focus of Jura's activity. Development and testing of new software, new security features are the most important parts of the work. Jura was the first on the world to release her Engraver Software enabling artist-engravers to create engraving-styled portraits digitally. This development, incompatibility with Jura's security design software package, enabled a full digital workflow for banknote origination. Jura made a lot of remarkable steps to develop security features also for Document Personalization. This development links the personal data with the photography of the document' holder by encoding personal data to the photography, invisibly for naked human eye, however, decodable by an appropriate decoding device. This feature exists also in machine-readable digital version. Experts of Jura started the research and development on digital screening 15 years ago for commercial printing and 10 years ago on special screens for security printing technologies. In very early stage of this development, when knowledge of creating each screen-dot individually in shape, form and position was acquired, the idea was born to use the screen dots as secondary data holder for encoded messages.

  1. Security enhanced optical one-time password authentication method by using digital holography

    NASA Astrophysics Data System (ADS)

    Gil, Sang Keun; Jeon, Seok Hee; Jeong, Jong Rae

    2015-03-01

    We propose a new optical one-time password(OTP) authentication method by using digital holography, which enhances security strength in the cryptosystem compared to the conventional electronic OTP method. In this paper, a challenge-response optical OTP authentication based on two-factor authentication is presented by 2-step quadrature phase-shifting digital holography using orthogonal polarization, and two-way authentication is also performed using the challenge-response handshake in both directions. The ID (identification), PW (password) and OTP information are encrypted with a shared key by applying phase-shifting digital holography, and these encrypted information are verified each other by the shared key. Because the encrypted digital holograms which are transmitted to the other party are expressed as random distribution, it guards against a replay attack and results in higher security level. Optically, encrypted digital hologram in our method is Fourier transform hologram and is recorded on CCD with 256 gray-level quantized intensities. The proposed method has an advantage that it does not need a time-synchronized OTP and can be applied to various security services. Computer experiments show that the proposed method is suitable for high secure OTP authentication.

  2. Electronic polarization-division demultiplexing based on digital signal processing in intensity-modulation direct-detection optical communication systems.

    PubMed

    Kikuchi, Kazuro

    2014-01-27

    We propose a novel configuration of optical receivers for intensity-modulation direct-detection (IM · DD) systems, which can cope with dual-polarization (DP) optical signals electrically. Using a Stokes analyzer and a newly-developed digital signal-processing (DSP) algorithm, we can achieve polarization tracking and demultiplexing in the digital domain after direct detection. Simulation results show that the power penalty stemming from digital polarization manipulations is negligibly small.

  3. Feasibility of direct digital sampling for diffuse optical frequency domain spectroscopy in tissue

    NASA Astrophysics Data System (ADS)

    Roblyer, Darren; O'Sullivan, Thomas D.; Warren, Robert V.; Tromberg, Bruce J.

    2013-04-01

    Frequency domain optical spectroscopy in the diffusive regime is currently being investigated for biomedical applications including tumor detection, therapy monitoring, exercise metabolism and others. Analog homodyne or heterodyne detection of sinusoidally modulated signals has been the predominant method for measuring phase and amplitude of photon density waves that have traversed through tissue. Here we demonstrate the feasibility of utilizing direct digital sampling of modulated signals using a 3.6 gigasample/second 12 bit analog to digital converter. Digitally synthesized modulated signals between 50 MHz and 400 MHz were measured on tissue-simulating phantoms at six near-infrared wavelengths. An amplitude and phase precision of 1% and 0.6° were achieved during drift tests. Amplitude, phase, scattering and absorption values were compared with a well-characterized network analyzer-based diffuse optical device. Optical properties measured with both systems were within 3.6% for absorption and 2.8% for scattering over a range of biologically relevant values. Direct digital sampling represents a viable method for frequency domain diffuse optical spectroscopy and has the potential to reduce system complexity, size and cost.

  4. Feasibility of Direct Digital Sampling for Diffuse Optical Frequency Domain Spectroscopy in Tissue.

    PubMed

    Roblyer, Darren; O'Sullivan, Thomas D; Warren, Robert V; Tromberg, Bruce

    2013-04-01

    Frequency domain optical spectroscopy in the diffusive regime is currently being investigated for biomedical applications including tumor detection, therapy monitoring, exercise metabolism, and others. Analog homodyne or heterodyne detection of sinusoidally modulated signals have been the predominant method for measuring phase and amplitude of photon density waves that have traversed through tissue. Here we demonstrate the feasibility of utilizing direct digital sampling of modulated signals using a 3.6 Gigasample/second 12 bit Analog to Digital Converter. Digitally synthesized modulated signals between 50MHz and 400MHz were measured on tissue simulating phantoms at six near-infrared wavelengths. An amplitude and phase precision of 1% and 0.6 degrees were achieved during drift tests. Amplitude, phase, scattering and absorption values were compared with a well-characterized network analyzer based diffuse optical device. Measured optical properties measured with both systems were within 3.6% for absorption and 2.8% for scattering over a range of biologically relevant values. Direct digital sampling represents a viable method for frequency domain diffuse optical spectroscopy and has the potential to reduce system complexity, size, and cost.

  5. The Impact of Fiber Nonlinearities on Digital Optical Communication Systems

    NASA Astrophysics Data System (ADS)

    Chiang, Ting-Kuang

    Wavelength-division multiplexing (WDM) enables high throughput fiber-optic networks by sending several optical channels through a single fiber. Even though the bandwidth of optical fibers is over 25 THz, fiber nonlinearities can limit the capacity of WDM communication systems. Cross -phase modulation (XPM) is one of the nonlinear effects that affect WDM systems. This thesis provides an in-depth understanding of the properties of XPM-induced phase shift and suggests techniques to suppress XPM in long-distance WDM optical networks. In this thesis, XPM is theoretically and experimentally investigated in fiber links with optical amplifiers and dispersion compensators. The theoretical analysis suggests that the XPM effect can be modeled as a phase modulator with inputs from the intensity of co-propagating waves. The frequency response of the phase modulator depends on fiber dispersion, wavelength separation, and fiber length. In non-dispersive fibers, XPM is frequency-independent; in dispersive fibers, the response is approximately inversely proportional to modulation frequency, fiber dispersion, and wavelength separation. In N-segment amplified links with no dispersion compensators, the XPM frequency response is increased N -fold, but only in very narrow frequency bands. In most other frequency bands, the increase is limited and almost independent of N. However, in N-segment amplified links with dispersion compensators, the frequency response of XPM is increased N-fold at all frequencies if the dispersion is compensated for within each fiber segment. The XPM-induced sensitivity penalty in multichannel continuous-phase frequency-shift-keying optical communication systems is investigated by theoretical analysis, computer simulations, and experimental measurements. It is shown that high-frequency components in the XPM-induced phase shift play a more important role in determining the sensitivity penalty than the low-frequency components. The XPM-induced sensitivity penalty

  6. A Novel Optical/digital Processing System for Pattern Recognition

    NASA Technical Reports Server (NTRS)

    Boone, Bradley G.; Shukla, Oodaye B.

    1993-01-01

    This paper describes two processing algorithms that can be implemented optically: the Radon transform and angular correlation. These two algorithms can be combined in one optical processor to extract all the basic geometric and amplitude features from objects embedded in video imagery. We show that the internal amplitude structure of objects is recovered by the Radon transform, which is a well-known result, but, in addition, we show simulation results that calculate angular correlation, a simple but unique algorithm that extracts object boundaries from suitably threshold images from which length, width, area, aspect ratio, and orientation can be derived. In addition to circumventing scale and rotation distortions, these simulations indicate that the features derived from the angular correlation algorithm are relatively insensitive to tracking shifts and image noise. Some optical architecture concepts, including one based on micro-optical lenslet arrays, have been developed to implement these algorithms. Simulation test and evaluation using simple synthetic object data will be described, including results of a study that uses object boundaries (derivable from angular correlation) to classify simple objects using a neural network.

  7. Design and production of the digital optical module of the KM3NeT project

    NASA Astrophysics Data System (ADS)

    Leonora, Emanuele; Giordano, Valentina

    2017-03-01

    The KM3NeT collaboration is building the ARCA and ORCA neutrino telescopes in the depths of the Mediterranean Sea. They will consist of 3-dimensional arrays of photodetectors, called digital optical modules, suspended in the sea by means of vertical string structures, called detection units. The optical modules are composed of a pressure-resistant 17-inch spherical glass vessel, which contains 31 small photomultiplier tubes and all the associated electronics. The multi- photomultiplier solution represents an innovative design with respect to optical modules of all currently operated neutrino telescopes comprising a single large photomultipliers.

  8. Development of an optical parallel logic device and a half-adder circuit for digital optical processing

    NASA Technical Reports Server (NTRS)

    Athale, R. A.; Lee, S. H.

    1978-01-01

    The paper describes the fabrication and operation of an optical parallel logic (OPAL) device which performs Boolean algebraic operations on binary images. Several logic operations on two input binary images were demonstrated using an 8 x 8 device with a CdS photoconductor and a twisted nematic liquid crystal. Two such OPAL devices can be interconnected to form a half-adder circuit which is one of the essential components of a CPU in a digital signal processor.

  9. Discrete convolution of digital optical signals during noncollinear second harmonic generation in the LiIO3 crystal

    NASA Astrophysics Data System (ADS)

    Berishev, I. E.; Rakovskii, V. Iu.; Selishchev, A. V.; Shcherbakov, A. S.

    1989-04-01

    The paper reports results of an experimental study of the possibility of implementing the discrete convolution of digital optical signals using the effect of second harmonic generation in a crystal with quadratic nonlinearity. With reference to results obtained for a LiIO3 single crystal, it is shown that, in the regime of noncollinear optical second harmonic generation, a nonlinear crystal can be used as a high-speed active element of a digital optical processor with parallel coding of binary data.

  10. Optical properties of a photopolymer film for digital holographic storage

    NASA Astrophysics Data System (ADS)

    Shin, Changwon; Kim, Junghoi; Kim, Nam; Lee, Hyojin; Kim, Eunkyoung

    2005-09-01

    Tir- and mono functional monomers were dispersed in a solution of polysulfone in organic solvent containing a photo initiator and other additives. New photopolymer film was prepared by dispersing acrylic monomer in a polysulfone matrix. The Polysulfone was adopted as a binder since it affords transparent thick films with low dimensional changes during holographic recording. Optical property of the photopolymer showed high diffraction efficiency (>90%) under an optimized optical condition at 532nm laser. The angular selectivity for angular multiplexing page oriented holographic memories (POHMs), the maximum diffraction efficiency of the material during holographic recording, the diffraction efficiency of the films as a function of an incident angle of two beams, exposure energy for saturation of the holographic material and application for holographic data storage will be discussed.

  11. Digital crossbar switch using nonlinear optical ring resonator

    NASA Astrophysics Data System (ADS)

    McAulay, Alastair D.

    2009-08-01

    Optical elements are preferred to electronic ones for military computing and communications to reduce vulnerability to electromagnetic pulses from nuclear explosion, electromagnetic bombs or lightning. Equations are derived for an optical micro ring resonator and for a nonlinear ring resonator that uses Kerr material so that the resonant frequency changes with light intensity in the ring. The switch can be modulated at faster than 10 Gbps for compatibility with electronic switches and equipment. A two-by-two switch is described based on the nonlinear ring resonator. A Benes network is constructed using the two-by-two switches. This allows full permutations of the inputs by means of an algorithm for setting the switches. Several rings are used for each frequency with slightly different frequencies to allow switching of wavelength division multiplexed signals.

  12. Real-time digital signal processing for live electro-optic imaging.

    PubMed

    Sasagawa, Kiyotaka; Kanno, Atsushi; Tsuchiya, Masahiro

    2009-08-31

    We present an imaging system that enables real-time magnitude and phase detection of modulated signals and its application to a Live Electro-optic Imaging (LEI) system, which realizes instantaneous visualization of RF electric fields. The real-time acquisition of magnitude and phase images of a modulated optical signal at 5 kHz is demonstrated by imaging with a Si-based high-speed CMOS image sensor and real-time signal processing with a digital signal processor. In the LEI system, RF electric fields are probed with light via an electro-optic crystal plate and downconverted to an intermediate frequency by parallel optical heterodyning, which can be detected with the image sensor. The artifacts caused by the optics and the image sensor characteristics are corrected by image processing. As examples, we demonstrate real-time visualization of electric fields from RF circuits.

  13. Filter-bank based digital sub-banding ASIC architecture for coherent optical receivers

    NASA Astrophysics Data System (ADS)

    Nazarathy, Moshe; Tolmachev, Alex

    2013-01-01

    We introduce a highly efficient high performance architecture for the digital signal processing of high speed coherent optical receivers. Our ASIC signal processing architecture ports for the first time to optical reception efficient filter bank signal processing structures. The resulting optical receiver ASICs are applicable to long-haul and metro photonic communication and provide substantial energy efficiency saving 30%-50% in power consumption. We aim to develop an ultra-high-speed optical receiver ASIC for transporting 160 Gb/s in a 25 GHz optical band - seven such channels will together carry 1Tb/s (plus overhead) in our 'TeraSanta' project of TeraBitPerSecond efficient transponders.

  14. Hybrid-integrated optical acceleration seismometer and its digital processing system

    NASA Astrophysics Data System (ADS)

    En, De; Chen, Caihe; Cui, Yuming; Tang, Donglin; Liang, Zhengxi; Gao, Hongyu

    2005-02-01

    Hybrid-integrated Optical acceleration seismometer and its digital signal processing system are researched and developed. The simple system figure of the seismometer is given. The principle of the seismometer is explicated. The seismometer is composed of a seismic mass,Integrated Optical Chips and a set of Michelson interferometer light path. The Michelson Integrated Optical Chips are critical parts among the sensor elements. The simple figure of the digital signal processing system is given. As an advanced quality digital signal processing (DSP) chip equipped with necessary circuits has been used in its digital signal processing system, a high accurate detection of the acceleration signal has been achieved and the environmental interference signal has been effectively compensated. Test results indicate that the accelerometer has better frequency response well above the resonant frequency, and the output signal is in correspondence with the input signal. The accelerometer also has better frequency response under the resonant frequency. At last, the curve of Seismometer frequency response is given.

  15. High-speed optical processing using digital micromirror device

    NASA Astrophysics Data System (ADS)

    Chao, Tien-Hsin; Lu, Thomas; Walker, Brian; Reyes, George

    2014-04-01

    We have designed optical processing architecture and algorithms utilizing the DMD as the input and filter Spatial Light Modulators (SLM). Detailed system analysis will be depicted. Experimental demonstration, for the first time, showing that a complex-valued spatial filtered can be successfully written on the DMDSLM using a Computer Generated Hologram (CGH) [1] encoding technique will also be provided. The high-resolution, high-bandwidth provided by the DMD and its potential low cost due to mass production will enable its vast defense and civil application.

  16. Implementation theory of distortion-invariant pattern recognition for optical and digital signal processing systems

    NASA Astrophysics Data System (ADS)

    Lhamon, Michael Earl

    A pattern recognition system which uses complex correlation filter banks requires proportionally more computational effort than single-real valued filters. This introduces increased computation burden but also introduces a higher level of parallelism, that common computing platforms fail to identify. As a result, we consider algorithm mapping to both optical and digital processors. For digital implementation, we develop computationally efficient pattern recognition algorithms, referred to as, vector inner product operators that require less computational effort than traditional fast Fourier methods. These algorithms do not need correlation and they map readily onto parallel digital architectures, which imply new architectures for optical processors. These filters exploit circulant-symmetric matrix structures of the training set data representing a variety of distortions. By using the same mathematical basis as with the vector inner product operations, we are able to extend the capabilities of more traditional correlation filtering to what we refer to as "Super Images". These "Super Images" are used to morphologically transform a complicated input scene into a predetermined dot pattern. The orientation of the dot pattern is related to the rotational distortion of the object of interest. The optical implementation of "Super Images" yields feature reduction necessary for using other techniques, such as artificial neural networks. We propose a parallel digital signal processor architecture based on specific pattern recognition algorithms but general enough to be applicable to other similar problems. Such an architecture is classified as a data flow architecture. Instead of mapping an algorithm to an architecture, we propose mapping the DSP architecture to a class of pattern recognition algorithms. Today's optical processing systems have difficulties implementing full complex filter structures. Typically, optical systems (like the 4f correlators) are limited to phase

  17. Suppression of image autocorrelation artefacts in spectral domain optical coherence tomography and multiwave digital holography

    SciTech Connect

    Gelikonov, V M; Gelikonov, G V; Terpelov, D A; Shabanov, D V; Shilyagin, P A

    2012-05-31

    An improved method for suppressing image artefacts in spectral domain optical coherence tomography (SD OCT) and multiwave digital holography, caused by the influence of coherent noise in the course of successive registration of an autocorrelation component and informative signal is reported. The method allows complete suppression of all types of coherent noises, provided that the sample of values used to record the autocorrelation component satisfies the conditions of Kotelnikov's theorem: in SD OCT - for the transverse structure of the studied medium, in multiwave digital holography - for the envelop function of the radiation source frequency tuning spectrum.

  18. Optical folding-flash analog-to-digital converter with analog encoding.

    PubMed

    Jalali, B; Xie, Y M

    1995-09-15

    We describe an optically assisted folding-flash analog-to-digital converter. The periodic transfer function of the Mach-Zehnder interferometer is used to perform analog folding on the electronic signal to be quantized. A novel analog encoding scheme for efficient generation of gray code digital data is proposed. The new encoding scheme eliminates the requirement for interferometers with ultralow V(pi), which, so far, has hindered the development of such systems. The encoding concept is experimentally demonstrated through the use of LiNbO(3) modulators.

  19. Combining digital holographic microscopy and optical tweezers: a new route in microfluidic

    NASA Astrophysics Data System (ADS)

    Miccio, L.; Memmolo, P.; Merola, F.; Paturzo, M.; Finizio, A.; Grilli, S.; Ferraro, P.

    2012-04-01

    An optical configuration is realized to obtain quantitative phase-contrast maps able to characterize particles floating in a microfluidic chamber by interference microscopy. The novelty is the possibility to drive the sample and measure it thorough the same light path. That is realized by an optical setup made of two light beams coming from the same laser source. One beam provides the optical forces for driving the particle along the desired path and, at same time, it works as object beam in the digital holographic microscope (DHM). The second one acts as reference beam, allowing recording of an interference fringe pattern (i.e., the digital hologram) in an out-of-focus image plane. This work finds application in the field of micromanipulation as, the devise developed allows to operate in microfluidic chambers driving samples flowing in very small volumes. Recently, the field of optical particle micro-manipulation has had rapid growth, due to Optical Tweezers development. A particle is trapped or moved along certain trajectories according to the intensity and phase distribution of the laser beam used. Here, particles freely floating are driven by optical forces along preferential directions and then analyzed by a DHM to numerically calculate their phase-contrast signature. The improvement is that one laser source is employed for making two jobs: driving and analyze the sample. We use two slightly off-axis laser beams coming from a single laser source. The interference between them gives the possibility to record in real-time a sequence of digital holograms, while one of the beam creates the driving force. By this method, a great amount of particles can be analyzed by a real-time recording of DH movies. This allows one to examine each particle at time and characterize it. The optical configuration and the working method are illustrated. Experimental results are shown for polymeric particles and in-vitro.

  20. Photonic quantum digital signatures operating over kilometer ranges in installed optical fiber

    NASA Astrophysics Data System (ADS)

    Collins, Robert J.; Fujiwara, Mikio; Amiri, Ryan; Honjo, Toshimori; Shimizu, Kaoru; Tamaki, Kiyoshi; Takeoka, Masahiro; Andersson, Erika; Buller, Gerald S.; Sasaki, Masahide

    2016-10-01

    The security of electronic communications is a topic that has gained noteworthy public interest in recent years. As a result, there is an increasing public recognition of the existence and importance of mathematically based approaches to digital security. Many of these implement digital signatures to ensure that a malicious party has not tampered with the message in transit, that a legitimate receiver can validate the identity of the signer and that messages are transferable. The security of most digital signature schemes relies on the assumed computational difficulty of solving certain mathematical problems. However, reports in the media have shown that certain implementations of such signature schemes are vulnerable to algorithmic breakthroughs and emerging quantum processing technologies. Indeed, even without quantum processors, the possibility remains that classical algorithmic breakthroughs will render these schemes insecure. There is ongoing research into information-theoretically secure signature schemes, where the security is guaranteed against an attacker with arbitrary computational resources. One such approach is quantum digital signatures. Quantum signature schemes can be made information-theoretically secure based on the laws of quantum mechanics while comparable classical protocols require additional resources such as anonymous broadcast and/or a trusted authority. Previously, most early demonstrations of quantum digital signatures required dedicated single-purpose hardware and operated over restricted ranges in a laboratory environment. Here, for the first time, we present a demonstration of quantum digital signatures conducted over several kilometers of installed optical fiber. The system reported here operates at a higher signature generation rate than previous fiber systems.

  1. Real-time optical fiber digital speckle pattern interferometry for industrial applications

    NASA Astrophysics Data System (ADS)

    Chan, Robert K.; Cheung, Y. M.; Lo, C. H.; Tam, T. K.

    1997-03-01

    There is current interest, especially in the industrial sector, to use the digital speckle pattern interferometry (DSPI) technique to measure surface stress. Indeed, many publications in the subject are evident of the growing interests in the field. However, to bring the technology to industrial use requires the integration of several emerging technologies, viz. optics, feedback control, electronics, imaging processing and digital signal processing. Due to the highly interdisciplinary nature of the technique, successful implementation and development require expertise in all of the fields. At Baptist University, under the funding of a major industrial grant, we are developing the technology for the industrial sector. Our system fully exploits optical fibers and diode lasers in the design to enable practical and rugged systems suited for industrial applications. Besides the development in optics, we have broken away from the reliance of a microcomputer PC platform for both image capture and processing, and have developed a digital signal processing array system that can handle simultaneous and independent image capture/processing with feedback control. The system, named CASPA for 'cascadable architecture signal processing array,' is a third generation development system that utilizes up to 7 digital signal processors has proved to be a very powerful system. With our CASPA we are now in a better position to developing novel optical measurement systems for industrial application that may require different measurement systems to operate concurrently and requiring information exchange between the systems. Applications in mind such as simultaneous in-plane and out-of-plane DSPI image capture/process, vibrational analysis with interactive DSPI and phase shifting control of optical systems are a few good examples of the potentials.

  2. Optically coupled digital altitude encoder for general aviation altimeters

    NASA Technical Reports Server (NTRS)

    Bryant, F. R.

    1975-01-01

    An optically coupled pressure altitude encoder which can be incorporated into commercially available inexpensive general aviation altimeters was successfully developed. The encoding of pressure altitude is accomplished in 100-ft (30.48-m) increments from -1000 to 20,000ft (-304.8 to 6096 m). The prototype encoders were retrofitted into two different internal altimeter configurations. A prototype encoder was checked for accuracy of transition points and environmental effects. Each altimeter configuration, with the encoder incorporated, was laboratory tested for performance and was subsequently flight-tested over the specified altitude range. With few exceptions, the assembled altimeter-encoder met aeronautical standards for altimeters and encoders. Design changes are suggested to improve performance to meet required standards consistently.

  3. Optical Measurement Techniques for Rocket Engine Testing and Component Applications: Digital Image Correlation and Dynamic Photogrammetry

    NASA Technical Reports Server (NTRS)

    Gradl, Paul

    2016-01-01

    NASA Marshall Space Flight Center (MSFC) has been advancing dynamic optical measurement systems, primarily Digital Image Correlation, for extreme environment rocket engine test applications. The Digital Image Correlation (DIC) technology is used to track local and full field deformations, displacement vectors and local and global strain measurements. This technology has been evaluated at MSFC through lab testing to full scale hotfire engine testing of the J-2X Upper Stage engine at Stennis Space Center. It has been shown to provide reliable measurement data and has replaced many traditional measurement techniques for NASA applications. NASA and AMRDEC have recently signed agreements for NASA to train and transition the technology to applications for missile and helicopter testing. This presentation will provide an overview and progression of the technology, various testing applications at NASA MSFC, overview of Army-NASA test collaborations and application lessons learned about Digital Image Correlation.

  4. Multi-aperture digital coherent combining for free-space optical communication receivers.

    PubMed

    Geisler, David J; Yarnall, Timothy M; Stevens, Mark L; Schieler, Curt M; Robinson, Bryan S; Hamilton, Scott A

    2016-06-13

    Space-to-ground optical communication systems can benefit from reducing the size, weight, and power profiles of space terminals. One way of reducing the required power-aperture product on a space platform is to implement effective, but costly, single-aperture ground terminals with large collection areas. In contrast, we present a ground terminal receiver architecture in which many small less-expensive apertures are efficiently combined to create a large effective aperture while maintaining excellent receiver sensitivity. This is accomplished via coherent detection behind each aperture followed by digitization. The digitized signals are then combined in a digital signal processing chain. Experimental results demonstrate lossless coherent combining of four lasercom signals, at power levels below 0.1 photons/bit/aperture.

  5. On-premises digital communications upgrades with emphasis on fiber optics

    NASA Astrophysics Data System (ADS)

    Hull, J. A.; Hanson, A. G.

    1986-11-01

    The Federal Telecommunications Standards Committee has established a Fiber Optics Task Group, one purpose of which is to develop guidelines for Federal agencies planning to use fiber optics in on-premises communications upgrades. The report describes the key technical elements under consideration in the Task Group. These technical elements include local area networks (LANs), digital private automatic branch exchanges (PABXs), building-wiring distribution architecture, and the application of optical fiber waveguides in the implementation of these on-premises systems. The report develops some fundamental principles necessary to do tradeoff analyses required to make decisions regarding cost versus early technological obsolescence. Some examples of commercially available technology representing the present state of the art are included. Brief summaries of technology readiness, as presented by several key industry representatives to the Fiber Optics Task Group, are provided.

  6. Digital subcarrier multiplexing for fiber nonlinearity mitigation in coherent optical communication systems.

    PubMed

    Qiu, Meng; Zhuge, Qunbi; Chagnon, Mathieu; Gao, Yuliang; Xu, Xian; Morsy-Osman, Mohamed; Plant, David V

    2014-07-28

    In this work we experimentally investigate the improved intra-channel fiber nonlinearity tolerance of digital subcarrier multiplexed (SCM) signals in a single-channel coherent optical transmission system. The digital signal processing (DSP) for the generation and reception of the SCM signals is described. We show experimentally that the SCM signal with a nearly-optimum number of subcarriers can extend the maximum reach by 23% in a 24 GBaud DP-QPSK transmission with a BER threshold of 3.8 × 10(-3) and by 8% in a 24 GBaud DP-16-QAM transmission with a BER threshold of 2 × 10(-2). Moreover, we show by simulations that the improved performance of SCM signals is observed over a wide range of baud rates, further indicating the merits of SCM signals in baud-rate flexible agile transmissions and future high-speed optical transport systems.

  7. Note: A simple broad bandwidth undersampling frequency-domain digital diffuse optical spectroscopy system

    NASA Astrophysics Data System (ADS)

    Jung, Justin; Istfan, Raeef; Roblyer, Darren

    2014-07-01

    Near-Infrared frequency-domain technologies, such as Diffuse Optical Spectroscopy (DOS), have demonstrated growing potential in a number of clinical applications. The broader dissemination of this technology is limited by the complexity and cost of instrumentation. We present here a simple system constructed with off-the-shelf components that utilizes undersampling for digital frequency-domain dDOS measurements. Broadband RF sweeps (50-300 MHz) were digitally sampled at 25 MSPS; amplitude, phase, and optical property extractions were within 5% of network analyzer derived values. The use of undersampling for broad bandwidth dDOS provides a significant reduction in complexity, power consumption, and cost compared with high-speed ADCs and analog techniques.

  8. An open source digital servo for atomic, molecular, and optical physics experiments

    PubMed Central

    Leibrandt, D. R.; Heidecker, J.

    2016-01-01

    We describe a general purpose digital servo optimized for feedback control of lasers in atomic, molecular, and optical physics experiments. The servo is capable of feedback bandwidths up to roughly 1 MHz (limited by the 320 ns total latency); loop filter shapes up to fifth order; multiple-input, multiple-output control; and automatic lock acquisition. The configuration of the servo is controlled via a graphical user interface, which also provides a rudimentary software oscilloscope and tools for measurement of system transfer functions. We illustrate the functionality of the digital servo by describing its use in two example scenarios: frequency control of the laser used to probe the narrow clock transition of 27Al+ in an optical atomic clock, and length control of a cavity used for resonant frequency doubling of a laser. PMID:26724014

  9. Single-shot digital holography for fast measuring optical properties of fibers.

    PubMed

    Agour, Mostafa; El-Farahaty, Keremal; Seisa, Eman; Omar, Emam; Sokkar, Taha

    2015-10-01

    We propose a fast method for measuring optical properties, e.g., the refractive index profile and birefringence, of fibers. It is based on recovering the phase distribution of light refracted by a fiber sample at the recording plane from a single-shot digital hologram. During the recovering process, an optimized approach based on the spatial carrier frequency method was utilized. The proposed approach enhances affects that arise from the limited spatial extent of the bandpass filter associated with the implementation of the spatial carrier frequency method. In contrast to the low spatial resolution of off-axis digital holograms, the method ensures the best utilization of the camera support. From the recovered phase information, the optical path difference is measured; thus, the refractive index profile, the mean refractive index, and the birefringence of isotactic polypropylene (IPP) are determined. Experimental results are given for illustration.

  10. An open source digital servo for atomic, molecular, and optical physics experiments

    SciTech Connect

    Leibrandt, D. R. Heidecker, J.

    2015-12-15

    We describe a general purpose digital servo optimized for feedback control of lasers in atomic, molecular, and optical physics experiments. The servo is capable of feedback bandwidths up to roughly 1 MHz (limited by the 320 ns total latency); loop filter shapes up to fifth order; multiple-input, multiple-output control; and automatic lock acquisition. The configuration of the servo is controlled via a graphical user interface, which also provides a rudimentary software oscilloscope and tools for measurement of system transfer functions. We illustrate the functionality of the digital servo by describing its use in two example scenarios: frequency control of the laser used to probe the narrow clock transition of {sup 27}Al{sup +} in an optical atomic clock, and length control of a cavity used for resonant frequency doubling of a laser.

  11. Note: A simple broad bandwidth undersampling frequency-domain digital diffuse optical spectroscopy system

    PubMed Central

    Jung, Justin; Istfan, Raeef; Roblyer, Darren

    2014-01-01

    Near-Infrared frequency-domain technologies, such as Diffuse Optical Spectroscopy (DOS), have demonstrated growing potential in a number of clinical applications. The broader dissemination of this technology is limited by the complexity and cost of instrumentation. We present here a simple system constructed with off-the-shelf components that utilizes undersampling for digital frequency-domain dDOS measurements. Broadband RF sweeps (50–300 MHz) were digitally sampled at 25 MSPS; amplitude, phase, and optical property extractions were within 5% of network analyzer derived values. The use of undersampling for broad bandwidth dDOS provides a significant reduction in complexity, power consumption, and cost compared with high-speed ADCs and analog techniques. PMID:25085193

  12. The design and characterization of a digital optical breast cancer imaging system.

    PubMed

    Flexman, Molly L; Li, Yang; Bur, Andres M; Fong, Christopher J; Masciotti, James M; Al Abdi, Rabah; Barbour, Randall L; Hielscher, Andreas H

    2008-01-01

    Optical imaging has the potential to play a major role in breast cancer screening and diagnosis due to its ability to image cancer characteristics such as angiogenesis and hypoxia. A promising approach to evaluate and quantify these characteristics is to perform dynamic imaging studies in which one monitors the hemodynamic response to an external stimulus, such as a valsalva maneuver. It has been shown that the response to such stimuli shows MARKED differences between cancerous and healthy tissues. The fast imaging rates and large dynamic range of digital devices makes them ideal for this type of imaging studies. Here we present a digital optical tomography system designed specifically for dynamic breast imaging. The instrument uses laser diodes at 4 different near-infrared wavelengths with 32 sources and 128 silicon photodiode detectors.

  13. Digitizing stereoscopic optic nerve head photographs for storage and viewing using a personal computer.

    PubMed

    Nesher, Ronit; Zacharopoulos, Ioannis; Assia, Ehud I; Schuman, Joel S

    2005-01-01

    Careful examination and monitoring of optic nerve head changes is essential in the treatment of patients with glaucoma. This often results in accumulation of numerous photographs and required appropriate storage space. A simple, inexpensive, and efficient means of storing and viewing stereoscopic optic nerve head photographs is described. Images were acquired with a fundus camera, on a color slide film. Slides were then scanned and digitized. A handheld stereoscope was used for stereoscopic viewing on a computer monitor. A scanning resolution of 300 dpi appeared optimal. At this resolution, the storage utilization was 16 kilobytes and the scanning time was 160 seconds per patient.

  14. Orientation function of optical mouse realized by digital speckle correlation method

    NASA Astrophysics Data System (ADS)

    Zhen, ZhiQiang; Tang, ZhengXin; Yan, Haitao; Lai, Fangming

    2008-12-01

    Used digital speckle correlation method (DSCM) to realize orientation function of optical mouse is researched. The experiment is designed to obtain the dynamic speckle patterns which are shot by CCD, Then the DSCM is used to process the sequential images and also the experiment is simulated. The experimental results show the DSCM can confirm orientation function of the optical mouse, and have a good agreement with the simulation results, and the resolution we obtained is higher than the resolution of mouse on the market.

  15. Used digital speckle correlation method to realize orientation function of optical mouse

    NASA Astrophysics Data System (ADS)

    Yan, Haitao; Wang, Ming; Ge, Yixian; Zhou, Junping

    2008-09-01

    Used digital speckle correlation method (DSCM) to realize orientation function of optical mouse is researched. The experiment is designed to obtain the dynamic speckle patterns which are shot by CCD, then the DSCM is used to process the sequential images and also the experiment is simulated. The experimental results show the DSCM can confirm orientation function of the optical mouse, and have a good agreement with the simulation results, and the resolution we obtained is higher than the resolution of mouse on the market.

  16. 40GS/s Optical analog-to-digital conversion system and its improvement.

    PubMed

    Wu, Qingwei; Zhang, Hongming; Peng, Yue; Fu, Xin; Yao, Minyu

    2009-05-25

    An optical analog-to-digital conversion system is proposed and demonstrated. Using time- and wavelength- interleaved optical sampling pulse train; sampling rate of 40GS/s is realized. 2.5 GHz sinusoidal electrical analog signal is sampled and quantized using this system, achieving an effective number of bits of 3.45 bits. A novel technology that can dramatically improve the bandwidth of this system will also be presented in this paper, which manifests that our system can realized high bandwidth of more than 50 GHz using commercially available LiNbO(3) phase modulator.

  17. Regional medical information network using optical memory cards and integrated services for digital network.

    PubMed

    Ogushi, Y; Misawa, T; Hayashi, Y; Ohta, Y; Suzuki, S; Horie, M; Sakashita, Y

    1995-01-01

    Since 1986, we have been developing a regional health and welfare system using optical memory cards. We have expanded the system and performed model experiments and evaluations this time. There are approximately 3000 card-holders and 23 card-reader terminals in use. They cover 50 percent of the medical facilities in the city of Isehara. Two medical clinics within neighboring cities have joined our project. Standard Deviation Index (SDI) has been introduced to standardize the numeric results of examinations. The terminals are connected with Integrated Services for Digital Network (ISDN) allowing remote access to the optical memory cards. This enhanced connectivity has allowed greater cooperation in delivering quality medical services.

  18. Performance evaluation of intensity modulated optical OFDM system with digital baseband distortion.

    PubMed

    Vanin, Evgeny

    2011-02-28

    Bit-Error-Ratio (BER) of intensity modulated optical orthogonal frequency division multiplexing (OFDM) system is analytically evaluated accounting for nonlinear digital baseband distortion in the transmitter and additive noise in the photo receiver. The nonlinear distortion that is caused by signal clipping and quantization is taken into consideration. The signal clipping helps to overcome the system performance limitation related to high peak-to-average power ratio (PAPR) of the OFDM signal and to minimize the value of optical power that is required for achieving specified BER. The signal quantization due to a limited bit resolution of the digital to analog converter (DAC) causes an optical power penalty in the case when the bit resolution is too low. By introducing an effective signal to noise ratio (SNR) the optimum signal clipping ratio, system BER and required optical power at the input to the receiver is evaluated for the OFDM system with multi-level quadrature amplitude modulation (QAM) applied to the optical signal subcarriers. Minimum required DAC bit resolution versus the size of QAM constellation is identified. It is demonstrated that the bit resolution of 7 and higher causes negligibly small optical power penalty at the system BER=10⁻³ when 256-QAM and a constellation of lower size is applied. The performance of the optical OFDM system is compared to the performance of the multi-level amplitude-shift keying (M-ASK) system for the same number of information bits transmitted per signal sample. It is demonstrated that in the case of the matched receiver the M-ASK system outperforms OFDM and requires 3-3.5 dB less of optical power at BER=10⁻³ when 1-4 data bits are transmitted per signal sample.

  19. Digital holographic interferometry for characterizing deformable mirrors in aero-optics

    NASA Astrophysics Data System (ADS)

    Trolinger, James D.; Hess, Cecil F.; Razavi, Payam; Furlong, Cosme

    2016-08-01

    Measuring and understanding the transient behavior of a surface with high spatial and temporal resolution are required in many areas of science. This paper describes the development and application of a high-speed, high-dynamic range, digital holographic interferometer for high-speed surface contouring with fractional wavelength precision and high-spatial resolution. The specific application under investigation here is to characterize deformable mirrors (DM) employed in aero-optics. The developed instrument was shown capable of contouring a deformable mirror with extremely high-resolution at frequencies exceeding 40 kHz. We demonstrated two different procedures for characterizing the mechanical response of a surface to a wide variety of input forces, one that employs a high-speed digital camera and a second that employs a low-speed, low-cost digital camera. The latter is achieved by cycling the DM actuators with a step input, producing a transient that typically lasts up to a millisecond before reaching equilibrium. Recordings are made at increasing times after the DM initiation from zero to equilibrium to analyze the transient. Because the wave functions are stored and reconstructable, they can be compared with each other to produce contours including absolute, difference, and velocity. High-speed digital cameras recorded the wave functions during a single transient at rates exceeding 40 kHz. We concluded that either method is fully capable of characterizing a typical DM to the extent required by aero-optical engineers.

  20. Optical Injection Locking of Vertical Cavity Surface-Emitting Lasers: Digital and Analog Applications

    NASA Astrophysics Data System (ADS)

    Parekh, Devang

    With the rise of mobile (cellphones, tablets, notebooks, etc.) and broadband wireline communications (Fiber to the Home), there are increasing demands being placed on transmitters for moving data from device to device and around the world. Digital and analog fiber-optic communications have been the key technology to meet this challenge, ushering in ubiquitous Internet and cable TV over the past 20 years. At the physical layer, high-volume low-cost manufacturing of semiconductor optoelectronic devices has played an integral role in allowing for deployment of high-speed communication links. In particular, vertical cavity surface emitting lasers (VCSEL) have revolutionized short reach communications and are poised to enter more markets due to their low cost, small size, and performance. However, VCSELs have disadvantages such as limited modulation performance and large frequency chirp which limits fiber transmission speed and distance, key parameters for many fiber-optic communication systems. Optical injection locking is one method to overcome these limitations without re-engineering the VCSEL at the device level. By locking the frequency and phase of the VCSEL by the direct injection of light from another laser oscillator, improved device performance is achieved in a post-fabrication method. In this dissertation, optical injection locking of VCSELs is investigated from an applications perspective. Optical injection locking of VCSELs can be used as a pathway to reduce complexity, cost, and size of both digital and analog fiber-optic communications. On the digital front, reduction of frequency chirp via bit pattern inversion for large-signal modulation is experimentally demonstrated showing up to 10 times reduction in frequency chirp and over 90 times increase in fiber transmission distance. Based on these results, a new reflection-based interferometric model for optical injection locking was established to explain this phenomenon. On the analog side, the resonance

  1. Reconstruction in interferometric synthetic aperture microscopy: comparison with optical coherence tomography and digital holographic microscopy.

    PubMed

    Sheppard, Colin J R; Kou, Shan Shan; Depeursinge, Christian

    2012-03-01

    It is shown that the spatial frequencies recorded in interferometric synthetic aperture microscopy do not correspond to exact backscattering [as they do in unistatic synthetic aperture radar (SAR)] and that the reconstruction process based on SAR is therefore based on an approximation. The spatial frequency response is developed based on the three-dimensional coherent transfer function approach and compared with that in optical coherence tomography and digital holographic microscopy.

  2. Optical mapping of Kamchatka's volcanic deposits using digitally processed band-selective photographs

    NASA Astrophysics Data System (ADS)

    Ivanov, S. I.; Novikov, V. V.; Popov, A. P.; Tadzhidinov, Kh. G.

    1989-08-01

    A procedure is described for the digital processing of band-selective aerial photographs of volcano-bearing surfaces. The brightness and color parameters of samples of volcanic rocks and soils in their natural bedding are examined, and the results of two-parameter (albedo-color) mapping for an area around the Tolbachin Volcano are discussed. It is shown that the information obtained with this procedure yields accurate predictions of geochemical properties of volcanic deposits from optical data.

  3. Optically Identified BL Lacertae Objects From the Sloan Digital Sky Survey

    DTIC Science & Technology

    2007-11-02

    386 BL Lacertae candidates identified from 2860 deg2 of the Sloan Digital Sky Survey ( SDSS ) spectroscopic database. The candidates are primarily...selected to have quasi-featureless optical spectra and low proper motions as measured from SDSS and USNO-B positions; however, our ability to separate...Sky Survey ( SDSS ; York et al. 2000) and the Two-Degree Field QSO Red- shift Survey (2QZ; Boyle et al. 2000), have the potential to reveal new

  4. Photonic processing and realization of an all-optical digital comparator based on semiconductor optical amplifiers

    NASA Astrophysics Data System (ADS)

    Singh, Simranjit; Kaur, Ramandeep; Kaler, Rajinder Singh

    2015-01-01

    A module of an all-optical 2-bit comparator is analyzed and implemented using semiconductor optical amplifiers (SOAs). By employing SOA-based cross phase modulation, the optical XNOR logic is used to get an A=B output signal, where as AB¯ and A¯B> logics operations are used to realize A>B and Aoptical high speed networks and computing systems.

  5. Development of high precision digital driver of acoustic-optical frequency shifter for ROG

    NASA Astrophysics Data System (ADS)

    Zhang, Rong; Kong, Mei; Xu, Yameng

    2016-10-01

    We develop a high precision digital driver of the acoustic-optical frequency shifter (AOFS) based on the parallel direct digital synthesizer (DDS) technology. We use an atomic clock as the phase-locked loop (PLL) reference clock, and the PLL is realized by a dual digital phase-locked loop. A DDS sampling clock up to 320 MHz with a frequency stability as low as 10-12 Hz is obtained. By constructing the RF signal measurement system, it is measured that the frequency output range of the AOFS-driver is 52-58 MHz, the center frequency of the band-pass filter is 55 MHz, the ripple in the band is less than 1 dB@3MHz, the single channel output power is up to 0.3 W, the frequency stability is 1 ppb (1 hour duration), and the frequency-shift precision is 0.1 Hz. The obtained frequency stability has two orders of improvement compared to that of the analog AOFS-drivers. For the designed binary frequency shift keying (2-FSK) and binary phase shift keying (2-PSK) modulation system, the demodulating frequency of the input TTL synchronous level signal is up to 10 kHz. The designed digital-bus coding/decoding system is compatible with many conventional digital bus protocols. It can interface with the ROG signal detecting software through the integrated drive electronics (IDE) and exchange data with the two DDS frequency-shift channels through the signal detecting software.

  6. Understanding the Physical Optics Phenomena by Using a Digital Application for Light Propagation

    NASA Astrophysics Data System (ADS)

    Sierra-Sosa, Daniel-Esteban; Ángel-Toro, Luciano

    2011-01-01

    Understanding the light propagation on the basis of the Huygens-Fresnel principle stands for a fundamental factor for deeper comprehension of different physical optics related phenomena like diffraction, self-imaging, image formation, Fourier analysis and spatial filtering. This constitutes the physical approach of the Fourier optics whose principles and applications have been developed since the 1950's. Both for analytical and digital applications purposes, light propagation can be formulated in terms of the Fresnel Integral Transform. In this work, a digital optics application based on the implementation of the Discrete Fresnel Transform (DFT), and addressed to serve as a tool for applications in didactics of optics is presented. This tool allows, at a basic and intermediate learning level, exercising with the identification of basic phenomena, and observing changes associated with modifications of physical parameters. This is achieved by using a friendly graphic user interface (GUI). It also assists the user in the development of his capacity for abstracting and predicting the characteristics of more complicated phenomena. At an upper level of learning, the application could be used to favor a deeper comprehension of involved physics and models, and experimenting with new models and configurations. To achieve this, two characteristics of the didactic tool were taken into account when designing it. First, all physical operations, ranging from simple diffraction experiments to digital holography and interferometry, were developed on the basis of the more fundamental concept of light propagation. Second, the algorithm was conceived to be easily upgradable due its modular architecture based in MATLAB® software environment. Typical results are presented and briefly discussed in connection with didactics of optics.

  7. Optical digital comparison unit for equal-to, less-than, and greater-than determination.

    PubMed

    Mitkas, P A; Feld, S A; Beyette, F R; Wilmsen, C W

    1994-02-10

    A number of nonnumerical processing applications, including database management, full text search, and pattern recognition rely heavily on digital comparisons. The development of massive-capacity optical memories coupled with the high speed and parallelism of optics have led to the investigation of optical techniques for nonnumerical processing. This paper proposes a system design for an optical comparator capable of performing multiple equal-to, less-than, and greater-than comparisons between pairs of binary words. The comparator consists of three two-dimensional arrays of optical elements based on a new optical logic device called the light-amplifying optical switch. The first two stages contain inverters, NOR gates, and flip-flops, while the third stage is a custom-designed winner-takes-all network. With a compact design and with small high-speed devices a comparator with 2.5 × 10(4) pixels could theoretically attain a processing rate of approximately 4 × 10(10) 16-bit word comparisons/s.

  8. Simultaneous demonstration on all-optical digital encoder and comparator at 40 Gb/s with semiconductor optical amplifiers.

    PubMed

    Wang, Yang; Zhang, Xinliang; Dong, Jianji; Huang, Dexiu

    2007-11-12

    We proposed and experimental demonstrated all-optical two line-four line encoder and two bit-wise comparator of RZ data streams at 40Gb/s based on cross gain modulation (XGM) and four wave mixing (FWM) in three parallel SOAs. Five logic functions for digital encoder and comparator between two signals A and B: AB, AB, AB, AB and AOmicronB, were achieved simultaneously. The first three optical logics are realized based on XGM in SOAs, the fourth is realized with FWM, and the fifth is the mixing result of the first and the fourth. A detuning filter is employed to improve the output performance. The output extinction ratio (ER) for the XGM operation is above 10dB, and the ER for FWM operation is around 8 dB. Wide and clear eye patterns for the five logic outputs can be observed.

  9. Optical 3D surface digitizing in forensic medicine: 3D documentation of skin and bone injuries.

    PubMed

    Thali, Michael J; Braun, Marcel; Dirnhofer, Richard

    2003-11-26

    Photography process reduces a three-dimensional (3D) wound to a two-dimensional level. If there is a need for a high-resolution 3D dataset of an object, it needs to be three-dimensionally scanned. No-contact optical 3D digitizing surface scanners can be used as a powerful tool for wound and injury-causing instrument analysis in trauma cases. The 3D skin wound and a bone injury documentation using the optical scanner Advanced TOpometric Sensor (ATOS II, GOM International, Switzerland) will be demonstrated using two illustrative cases. Using this 3D optical digitizing method the wounds (the virtual 3D computer model of the skin and the bone injuries) and the virtual 3D model of the injury-causing tool are graphically documented in 3D in real-life size and shape and can be rotated in the CAD program on the computer screen. In addition, the virtual 3D models of the bone injuries and tool can now be compared in a 3D CAD program against one another in virtual space, to see if there are matching areas. Further steps in forensic medicine will be a full 3D surface documentation of the human body and all the forensic relevant injuries using optical 3D scanners.

  10. Analog and digital transport of RF channels over converged 5G wireless-optical networks

    NASA Astrophysics Data System (ADS)

    Binh, Le Nguyen

    2016-02-01

    Under the exponential increase demand by the emerging 5G wireless access networking and thus data-center based Internet, novel and economical transport of RF channels to and from wireless access systems. This paper presents the transport technologies of RF channels over the analog and digital domain so as to meet the demands of the transport capacity reaching multi-Tbps, in the followings: (i) The convergence of 5G broadband wireless and optical networks and its demands on capacity delivery and network structures; (ii) Analog optical technologies for delivery of both the information and RF carriers to and from multiple-input multiple-output (MIMO) antenna sites so as to control the beam steering of MIMO antenna in the mmW at either 28.6 GHz and 56.8 GHz RF carrier and delivery of channels of aggregate capacity reaching several Tbps; (ii) Transceiver employing advanced digital modulation formats and digital signal processing (DSP) so as to provide 100G and beyond transmission rate to meet the ultra-high capacity demands with flexible spectral grids, hence pay-on-demand services. The interplay between DSP-based and analog transport techniques is examined; (iii) Transport technologies for 5G cloud access networks and associate modulation and digital processing techniques for capacity efficiency; and (iv) Finally the integrated optic technologies with novel lasers, comb generators and simultaneous dual function photonic devices for both demultiplexing/multiplexing and modulation are proposed, hence a system on chip structure can be structured. Quantum dot lasers and matrixes of micro ring resonators are integrated on the same Si-on-Silica substrate are proposed and described.

  11. Digitalized detection of optical axes' parallelism in multi-optical axes system

    NASA Astrophysics Data System (ADS)

    Liu, Bingqi; Ling, Jun; Zhou, Bing; Zhao, Xilin

    2002-09-01

    Automation and intelligent function in performance testing of optical instrument are the key problems in modern detection technology. In this paper a testing system based on the detection in laboratory is proposed and has successfully realized the detection of multi-optical axes" parallelism. This system is on the base of optics, mechanics and electricity, and combines the modern computer technology to gather and process the data obtained in the experiment, finally high-precision quantified results can be gotten, so these results can provide reliable data for the alignment of optical axes. The paper introduces the whole testing system"s design options, system composition, operational principle and software design in detail, and it"s technical difficulties and emphases are also analyzed and discussed.

  12. Dynamic optical tomographic imager with optimized digital lock-in filtering

    NASA Astrophysics Data System (ADS)

    Lasker, Joseph M.; Masciotti, James M.; Li, Yang; Fong, Chris; Hielscher, Andreas H.

    2007-07-01

    We describe a new dynamic optical tomography system that is, unlike currently available analog instrumentation, based on digital data-acquisition and filtering techniques. At the heart of this continuous wave instrument is a digital signal processor (DSP) that collects, collates, processes, and filters the digitized data set. A digital lock-in filter that has been designed for this particular application maximizes measurement fidelity. The synchronously-timed processes are controlled by a complex programmable logic device (CPLD) that is also used in conjunction with the DSP to orchestrate data flow. Real-time data rates as high as 140Hz can be achieved. The operation of the system is implemented through a graphical user interface designed with LabVIEW software, Performance analysis shows very low system noise (~600fW RMS noise equivalent power), excellent signal precision (<0.04% - 0.2%) and long-term system stability (<1% over 40 min). A large dynamic range (~195dB) accommodates a wide scope of measurement geometries and tissue types. First experiments on tissue phantoms show that dynamic behavior is accurately captured and spatial location can be correctly tracked using this system.

  13. Comparison of digital and film stereo photography of the optic nerve in the evaluation of patients with glaucoma.

    PubMed

    Khouri, Albert S; Szirth, Bernard; Realini, Tony; Fechtner, Robert D

    2006-12-01

    The aim of this study was to validate a digital simultaneous stereo photography system against film in the assessment of optic nerve head features in patients with glaucoma. Fifteen digital and 15 corresponding film simultaneous stereo photographs (SSP) of the optic nerve from patients with glaucoma were graded by two glaucoma specialists. Assessed parameters included the vertical and horizontal cup-to-disc ratios (VCD and HCD, respectively), and the image quality score (1 = worse, 5 = best) for each image. Digital and film SSP were presented in random order, two times to each grader. A total of 60 evaluations (30 digital and 30 film) per grader were collected. A Nidek 3-Dx simultaneous stereo disc camera (Gamagori, Japan) was used with both a standard 35-mm-film camera back, and with a 6.1 mega pixel camera (Nikon D1x, Tokyo, Japan) for capture of digital images. All digital images were stored on a computer and reviewed using the Navis Screener software (proprietary software from Nidek). Digital image pairs were evaluated directly on an ADVAN 27-inch Liquid Crystal Display computer monitor (Taipei, Taiwan) with resolution comparable to that of the digital camera, using the screen-vu stereo viewer held at a fixed angle to the monitor. Film image pairs were evaluated using a Pentax stereo slide viewer (Asahi Optical Co., Tokyo, Japan) illuminated by a light box over a neutral density filter to match the luminance between the computer screen and the light box. The mean difference between digital and film was near zero for all three evaluated outcomes (VCD, HCD, and quality score), and there was no significant grader effect for any of the outcomes. Digital images correlated well with film for SSP of the optic nerve in glaucoma.

  14. A digital optical phase-locked loop for diode lasers based on field programmable gate array.

    PubMed

    Xu, Zhouxiang; Zhang, Xian; Huang, Kaikai; Lu, Xuanhui

    2012-09-01

    We have designed and implemented a highly digital optical phase-locked loop (OPLL) for diode lasers in atom interferometry. The three parts of controlling circuit in this OPLL, including phase and frequency detector (PFD), loop filter and proportional integral derivative (PID) controller, are implemented in a single field programmable gate array chip. A structure type compatible with the model MAX9382∕MCH12140 is chosen for PFD and pipeline and parallelism technology have been adapted in PID controller. Especially, high speed clock and twisted ring counter have been integrated in the most crucial part, the loop filter. This OPLL has the narrow beat note line width below 1 Hz, residual mean-square phase error of 0.14 rad(2) and transition time of 100 μs under 10 MHz frequency step. A main innovation of this design is the completely digitalization of the whole controlling circuit in OPLL for diode lasers.

  15. Simple and robust symbol rate estimation method for digital coherent optical receivers

    NASA Astrophysics Data System (ADS)

    Cui, Sheng; Xia, Wenjuan; Shang, Jin; Ke, Changjian; Fu, Songnian; Liu, Deming

    2016-05-01

    A novel symbol rate estimation (SRE) technique utilizing the clock tone (CT) obtained by Godard timing recovery algorithm is proposed. By this technique, the known sampling rate of the analog-to-digital converter (ADC) in digital coherent optical receivers can used as a reference to directly determine the unknown signal symbol rate. The impact of polarization mode dispersion (PMD) on the CT magnitude can be mitigated by using the hybrid correlation function (HCF) consisting of both auto-correlation function (ACF) and cross-correlation function (XCF) of the received signal spectrum, while the chromatic dispersion (CD) impact can be mitigated by adaptive CD compensation techniques. This technique is simple, accurate, applicable to advanced modulation formats commonly used, and robust to various link impairments. Numerical simulations and experimental results are presented to validate this technique.

  16. A digital optical phase-locked loop for diode lasers based on field programmable gate array

    NASA Astrophysics Data System (ADS)

    Xu, Zhouxiang; Zhang, Xian; Huang, Kaikai; Lu, Xuanhui

    2012-09-01

    We have designed and implemented a highly digital optical phase-locked loop (OPLL) for diode lasers in atom interferometry. The three parts of controlling circuit in this OPLL, including phase and frequency detector (PFD), loop filter and proportional integral derivative (PID) controller, are implemented in a single field programmable gate array chip. A structure type compatible with the model MAX9382/MCH12140 is chosen for PFD and pipeline and parallelism technology have been adapted in PID controller. Especially, high speed clock and twisted ring counter have been integrated in the most crucial part, the loop filter. This OPLL has the narrow beat note line width below 1 Hz, residual mean-square phase error of 0.14 rad2 and transition time of 100 μs under 10 MHz frequency step. A main innovation of this design is the completely digitalization of the whole controlling circuit in OPLL for diode lasers.

  17. A digital optical phase-locked loop for diode lasers based on field programmable gate array

    SciTech Connect

    Xu Zhouxiang; Zhang Xian; Huang Kaikai; Lu Xuanhui

    2012-09-15

    We have designed and implemented a highly digital optical phase-locked loop (OPLL) for diode lasers in atom interferometry. The three parts of controlling circuit in this OPLL, including phase and frequency detector (PFD), loop filter and proportional integral derivative (PID) controller, are implemented in a single field programmable gate array chip. A structure type compatible with the model MAX9382/MCH12140 is chosen for PFD and pipeline and parallelism technology have been adapted in PID controller. Especially, high speed clock and twisted ring counter have been integrated in the most crucial part, the loop filter. This OPLL has the narrow beat note line width below 1 Hz, residual mean-square phase error of 0.14 rad{sup 2} and transition time of 100 {mu}s under 10 MHz frequency step. A main innovation of this design is the completely digitalization of the whole controlling circuit in OPLL for diode lasers.

  18. Anisotropic aberration correction using region of interest based digital adaptive optics in Fourier domain OCT.

    PubMed

    Kumar, Abhishek; Kamali, Tschackad; Platzer, René; Unterhuber, Angelika; Drexler, Wolfgang; Leitgeb, Rainer A

    2015-04-01

    In this paper a numerical technique is presented to compensate for anisotropic optical aberrations, which are usually present across the lateral field of view in the out of focus regions, in high resolution optical coherence tomography and microscopy (OCT/OCM) setups. The recorded enface image field at different depths in the tomogram is digitally divided into smaller sub-regions or the regions of interest (ROIs), processed individually using subaperture based digital adaptive optics (DAO), and finally stitched together to yield a final image with a uniform diffraction limited resolution across the entire field of view (FOV). Using this method, a sub-micron lateral resolution is achieved over a depth range of 218 [Formula: see text]for a nano-particle phantom sample imaged using a fiber based point scanning spectral domain (SD) OCM system with a limited depth of focus (DOF) of ~7 [Formula: see text]at a numerical aperture (NA) of 0.6. Thus, an increase in DOF by ~30x is demonstrated in this case. The application of this method is also shown in ex vivo mouse adipose tissue.

  19. Anisotropic aberration correction using region of interest based digital adaptive optics in Fourier domain OCT

    PubMed Central

    Kumar, Abhishek; Kamali, Tschackad; Platzer, René; Unterhuber, Angelika; Drexler, Wolfgang; Leitgeb, Rainer A.

    2015-01-01

    In this paper a numerical technique is presented to compensate for anisotropic optical aberrations, which are usually present across the lateral field of view in the out of focus regions, in high resolution optical coherence tomography and microscopy (OCT/OCM) setups. The recorded enface image field at different depths in the tomogram is digitally divided into smaller sub-regions or the regions of interest (ROIs), processed individually using subaperture based digital adaptive optics (DAO), and finally stitched together to yield a final image with a uniform diffraction limited resolution across the entire field of view (FOV). Using this method, a sub-micron lateral resolution is achieved over a depth range of 218 μmfor a nano-particle phantom sample imaged using a fiber based point scanning spectral domain (SD) OCM system with a limited depth of focus (DOF) of ~7 μmat a numerical aperture (NA) of 0.6. Thus, an increase in DOF by ~30x is demonstrated in this case. The application of this method is also shown in ex vivo mouse adipose tissue. PMID:25908999

  20. The importance of optical optimization in whole slide imaging (WSI) and digital pathology imaging.

    PubMed

    Yagi, Yukako; Gilbertson, John R

    2008-07-15

    In the last 10 years, whole slide imaging (WSI) has seen impressive progress not only in image quality and scanning speed but also in the variety of systems available to pathologists. However, we have noticed that most systems have relatively simple optics axes and rely on software to optimize image quality and colour balance. While much can be done in software, this study examines the importance of optics, in particular optical filters, in WSI.Optical resolution is a function of the wavelength of light used and the numerical aperture of the lens system (Resolution = (f) wavelength/2 NA). When illumining light is not conditioned correctly with filters, there is a tendency for the wavelength to shift to longer values (more red) because of the characteristics of the lamps in common use. Most microscopes (but remarkably few WSI devices) correct for this with ND filter for brightness and Blue filter (depends on the light source) for colour correction.Using H&E slides research microscopes (Axiophot, Carl Zeiss MicroImaging, Inc. NY. Eclipse 50i., Nikon Inc. NY) at 20x, an attached digital camera (SPOT RT741 Slider Color, Diagnosis Instruments., MI USA), and a filter set, we examined the effect of filters and software enhancement on digital image quality. The focus value (as evaluated by focus evaluation software developed in house and SPOT imaging Software v4.6) was used as a proxy for image quality. Resolution of tissue features was best with the use of both the Blue and ND filters (in addition to software enhancement). Images without filters but with software enhancement while superficially good, lacked some details of specimen morphology and were unclear compared with the images with filters.The results indicate that the appropriate use of optical filters could measurably improve the appearance and resolution of WSI images.

  1. Demonstration of all-optical two bit digital comparator using self-locked Fabry-Perot laser diode

    NASA Astrophysics Data System (ADS)

    Nakarmi, Bikash; Rakib-Uddin, M.; Won, Yong Hyub

    2012-02-01

    All-optical two bit digital comparator using single mode Fabry-Perot laser diodes (SMFP-LDs) is proposed and demonstrated with 10 Gbps PRBS signal of 231-1. Digital comparators are one of the important components for decision making circuits, threshold detection, which are used in optical signal processing and optical computing. The basic principle of the comparator is based on injection locking, multi-input injection locking and combinational input injection locking (CMIL) to realize the greater than, less than, and equal to function of the basic comparator circuit. These principles are used to realize the different optical logic gates which are combined together to demonstrate optical comparator with the minimum number of components, making the configuration cheaper and simpler. The proposed method draws less current and hence power effective too. Output waveform diagram and output eye diagram for all three cases of comparator are presented to verify all functions of all-optical comparator.

  2. Beam studies at the SPEAR3 synchrotron using a digital optical mask

    SciTech Connect

    Zhang, H. D.; Fiorito, R. B.; Corbett, J.; Shkvarunets, A. G.; Tian, K.; Fisher, A.

    2016-05-01

    The 3GeV SPEAR3 synchrotron light source operates in top-up injection mode with up to 500 mA circulating in the storage ring (equivalently 392 nC). Each injection pulse contains 40–80 pC producing a contrast ratio between total stored charge and injected charge of about 6500:1. In order to study transient injected beam dynamics during user operations, it is desirable to optically image the injected pulse in the presence of the bright stored beam. In the present work this is done by imaging the visible component of the synchrotron radiation onto a digital micro-mirror-array device (DMD), which is then used as an optical mask to block out light from the bright central core of the stored beam. The physical masking, together with an asynchronously-gated, ICCD imaging camera, makes it possible to observe the weak injected beam component on a turn-by-turn basis. The DMD optical masking system works similar to a classical solar coronagraph but has some distinct practical advantages: i.e. rapid adaption to changes in the shape of the stored beam, a high extinction ratio for unwanted light and minimum scattering from the primary beam into the secondary optics. In this paper we describe the DMD masking method, features of the high dynamic range point spread function for the SPEAR3 optical beam line and measurements of the injected beam in the presence of the stored beam.

  3. Beam studies at the SPEAR3 synchrotron using a digital optical mask

    NASA Astrophysics Data System (ADS)

    Zhang, H. D.; Fiorito, R. B.; Corbett, J.; Shkvarunets, A. G.; Tian, K.; Fisher, A.

    2016-05-01

    The 3GeV SPEAR3 synchrotron light source operates in top-up injection mode with up to 500 mA circulating in the storage ring (equivalently 392 nC). Each injection pulse contains 40-80 pC producing a contrast ratio between total stored charge and injected charge of about 6500:1. In order to study transient injected beam dynamics during user operations, it is desirable to optically image the injected pulse in the presence of the bright stored beam. In the present work this is done by imaging the visible component of the synchrotron radiation onto a digital micro-mirror-array device (DMD), which is then used as an optical mask to block out light from the bright central core of the stored beam. The physical masking, together with an asynchronously-gated, ICCD imaging camera, makes it possible to observe the weak injected beam component on a turn-by-turn basis. The DMD optical masking system works similar to a classical solar coronagraph but has some distinct practical advantages: i.e. rapid adaption to changes in the shape of the stored beam, a high extinction ratio for unwanted light and minimum scattering from the primary beam into the secondary optics. In this paper we describe the DMD masking method, features of the high dynamic range point spread function for the SPEAR3 optical beam line and measurements of the injected beam in the presence of the stored beam.

  4. Optical and digital pattern recognition; Proceedings of the Meeting, Los Angeles, CA, Jan. 13-15, 1987

    NASA Technical Reports Server (NTRS)

    Liu, Hua-Kuang (Editor); Schenker, Paul (Editor)

    1987-01-01

    The papers presented in this volume provide an overview of current research in both optical and digital pattern recognition, with a theme of identifying overlapping research problems and methodologies. Topics discussed include image analysis and low-level vision, optical system design, object analysis and recognition, real-time hybrid architectures and algorithms, high-level image understanding, and optical matched filter design. Papers are presented on synthetic estimation filters for a control system; white-light correlator character recognition; optical AI architectures for intelligent sensors; interpreting aerial photographs by segmentation and search; and optical information processing using a new photopolymer.

  5. Digital signal processor-based real-time optical Doppler tomography system.

    PubMed

    Yan, Shikui; Piao, Daqing; Chen, Yueli; Zhu, Quing

    2004-01-01

    We present a real-time data-processing and display unit based on a custom-designed digital signal processor (DSP) module for imaging tissue structure and Doppler blood flow. The DSP module is incorporated into a conventional optical coherence tomography system. We also demonstrate the flexibility of embedding advanced Doppler processing algorithms in the DSP module. Two advanced velocity estimation algorithms previously introduced by us are incorporated in this DSP module. Experiments on Intralipid flow demonstrate that a pulsatile flow of several hundred pulses per minute can be faithfully captured in M-scan mode by this DSP system. In vivo imaging of a rat's abdominal blood flow is also presented.

  6. Fast optical sectioning obtained by structured illumination microscopy using a digital mirror device.

    PubMed

    Xu, Dongli; Jiang, Tao; Li, Anan; Hu, Bihe; Feng, Zhao; Gong, Hui; Zeng, Shaoqun; Luo, Qingming

    2013-06-01

    High-throughput optical imaging is critical to obtain large-scale neural connectivity information of brain in neuroscience. Using a digital mirror device and a scientific complementary metal-oxide semiconductor camera, we report a significant speed improvement of structured illumination microscopy (SIM), which produces a maximum SIM net frame rate of 133 Hz. We perform three-dimensional (3-D) imaging of mouse brain slices at diffraction-limited resolution and demonstrate the fast 3-D imaging capability to a large sample with an imaging rate of 6.9×10(7)  pixel/s of our system, an order of magnitude faster than previously reported.

  7. Fast optical sectioning obtained by structured illumination microscopy using a digital mirror device

    NASA Astrophysics Data System (ADS)

    Xu, Dongli; Jiang, Tao; Li, Anan; Hu, Bihe; Feng, Zhao; Gong, Hui; Zeng, Shaoqun; Luo, Qingming

    2013-06-01

    High-throughput optical imaging is critical to obtain large-scale neural connectivity information of brain in neuroscience. Using a digital mirror device and a scientific complementary metal-oxide semiconductor camera, we report a significant speed improvement of structured illumination microscopy (SIM), which produces a maximum SIM net frame rate of 133 Hz. We perform three-dimensional (3-D) imaging of mouse brain slices at diffraction-limited resolution and demonstrate the fast 3-D imaging capability to a large sample with an imaging rate of 6.9 pixel/s of our system, an order of magnitude faster than previously reported.

  8. Optical wide field monitor AROMA-W using multiple digital single-lens reflex cameras

    NASA Astrophysics Data System (ADS)

    Takahashi, Ichiro; Tsunashima, Kosuke; Tatsuhito, Takeda; Saori, Ono; Kazutaka, Yamaoka; Yoshida, Atsumasa

    2010-12-01

    We have developed and operated the automatic optical observation device Aoyama Gakuin University Robotic Optical Monitor for Astrophysical objects - Wide field (AROMA-W). It covers a large field of view of about 45 degrees W 30 degrees at a time by the multiple digital single-lens reflex cameras, and provides photometric data in four bands with a limiting V magnitude of about 12-13 magnitude (20 seconds, 3 sigma level). The automatic analysis pipeline which can analyze in parallel with observation has been constructed so far. It can draw the light curves of all stars in the field of view of AROMA-W. We are aiming at the simultaneous observation of the transients (e.g., X-ray nova, Supernova, GRB) that MAXI discovered by using the AROMA-W. We report the developmental status, the observational results of AROMA-W and a possibility of the simultaneous observation to the X-ray transients discovered with MAXI.

  9. Digital coherent superposition of optical OFDM subcarrier pairs with Hermitian symmetry for phase noise mitigation.

    PubMed

    Yi, Xingwen; Chen, Xuemei; Sharma, Dinesh; Li, Chao; Luo, Ming; Yang, Qi; Li, Zhaohui; Qiu, Kun

    2014-06-02

    Digital coherent superposition (DCS) provides an approach to combat fiber nonlinearities by trading off the spectrum efficiency. In analogy, we extend the concept of DCS to the optical OFDM subcarrier pairs with Hermitian symmetry to combat the linear and nonlinear phase noise. At the transmitter, we simply use a real-valued OFDM signal to drive a Mach-Zehnder (MZ) intensity modulator biased at the null point and the so-generated OFDM signal is Hermitian in the frequency domain. At receiver, after the conventional OFDM signal processing, we conduct DCS of the optical OFDM subcarrier pairs, which requires only conjugation and summation. We show that the inter-carrier-interference (ICI) due to phase noise can be reduced because of the Hermitain symmetry. In a simulation, this method improves the tolerance to the laser phase noise. In a nonlinear WDM transmission experiment, this method also achieves better performance under the influence of cross phase modulation (XPM).

  10. Deep sea tests of a prototype of the KM3NeT digital optical module

    NASA Astrophysics Data System (ADS)

    Adrián-Martínez, S.; Ageron, M.; Aharonian, F.; Aiello, S.; Albert, A.; Ameli, F.; Anassontzis, E. G.; Anghinolfi, M.; Anton, G.; Anvar, S.; Ardid, M.; de Asmundis, R.; Balasi, K.; Band, H.; Barbarino, G.; Barbarito, E.; Barbato, F.; Baret, B.; Baron, S.; Belias, A.; Berbee, E.; van den Berg, A. M.; Berkien, A.; Bertin, V.; Beurthey, S.; van Beveren, V.; Beverini, N.; Biagi, S.; Bianucci, S.; Billault, M.; Birbas, A.; Boer Rookhuizen, H.; Bormuth, R.; Bouché, V.; Bouhadef, B.; Bourlis, G.; Bouwhuis, M.; Bozza, C.; Bruijn, R.; Brunner, J.; Cacopardo, G.; Caillat, L.; Calamai, M.; Calvo, D.; Capone, A.; Caramete, L.; Caruso, F.; Cecchini, S.; Ceres, A.; Cereseto, R.; Champion, C.; Château, F.; Chiarusi, T.; Christopoulou, B.; Circella, M.; Classen, L.; Cocimano, R.; Colonges, S.; Coniglione, R.; Cosquer, A.; Costa, M.; Coyle, P.; Creusot, A.; Curtil, C.; Cuttone, G.; D'Amato, C.; D'Amico, A.; De Bonis, G.; De Rosa, G.; Deniskina, N.; Destelle, J.-J.; Distefano, C.; Donzaud, C.; Dornic, D.; Dorosti-Hasankiadeh, Q.; Drakopoulou, E.; Drouhin, D.; Drury, L.; Durand, D.; Eberl, T.; Eleftheriadis, C.; Elsaesser, D.; Enzenhöfer, A.; Fermani, P.; Fusco, L. A.; Gajana, D.; Gal, T.; Galatà, S.; Gallo, F.; Garufi, F.; Gebyehu, M.; Giordano, V.; Gizani, N.; Gracia Ruiz, R.; Graf, K.; Grasso, R.; Grella, G.; Grmek, A.; Habel, R.; van Haren, H.; Heid, T.; Heijboer, A.; Heine, E.; Henry, S.; Hernández-Rey, J. J.; Herold, B.; Hevinga, M. A.; van der Hoek, M.; Hofestädt, J.; Hogenbirk, J.; Hugon, C.; Hößl, J.; Imbesi, M.; James, C.; Jansweijer, P.; Jochum, J.; de Jong, M.; Kadler, M.; Kalekin, O.; Kappes, A.; Kappos, E.; Katz, U.; Kavatsyuk, O.; Keller, P.; Kieft, G.; Koffeman, E.; Kok, H.; Kooijman, P.; Koopstra, J.; Korporaal, A.; Kouchner, A.; Koutsoukos, S.; Kreykenbohm, I.; Kulikovskiy, V.; Lahmann, R.; Lamare, P.; Larosa, G.; Lattuada, D.; Le Provost, H.; Leisos, A.; Lenis, D.; Leonora, E.; Lindsey Clark, M.; Liolios, A.; Llorens Alvarez, C. D.; Löhner, H.; Lo Presti, D.; Louis, F.; Maccioni, E.; Mannheim, K.; Manolopoulos, K.; Margiotta, A.; Mariş, O.; Markou, C.; Martínez-Mora, J. A.; Martini, A.; Masullo, R.; Michael, T.; Migliozzi, P.; Migneco, E.; Miraglia, A.; Mollo, C.; Mongelli, M.; Morganti, M.; Mos, S.; Moudden, Y.; Musico, P.; Musumeci, M.; Nicolaou, C.; Nicolau, C. A.; Orlando, A.; Orzelli, A.; Papageorgiou, K.; Papaikonomou, A.; Papaleo, R.; Păvălaş, G. E.; Peek, H.; Pellegrino, C.; Pellegriti, M. G.; Perrina, C.; Petridou, C.; Piattelli, P.; Pikounis, K.; Popa, V.; Pradier, Th.; Priede, M.; Pühlhofer, G.; Pulvirenti, S.; Racca, C.; Raffaelli, F.; Randazzo, N.; Rapidis, P. A.; Razis, P.; Real, D.; Resvanis, L.; Reubelt, J.; Riccobene, G.; Rovelli, A.; Royon, J.; Saldaña, M.; Samtleben, D. F. E.; Sanguineti, M.; Santangelo, A.; Sapienza, P.; Savvidis, I.; Schmelling, J.; Schnabel, J.; Sedita, M.; Seitz, T.; Sgura, I.; Simeone, F.; Siotis, I.; Sipala, V.; Solazzo, M.; Spitaleri, A.; Spurio, M.; Stavropoulos, G.; Steijger, J.; Stolarczyk, T.; Stransky, D.; Taiuti, M.; Terreni, G.; Tézier, D.; Théraube, S.; Thompson, L. F.; Timmer, P.; Trapierakis, H. I.; Trasatti, L.; Trovato, A.; Tselengidou, M.; Tsirigotis, A.; Tzamarias, S.; Tzamariudaki, E.; Vallage, B.; Van Elewyck, V.; Vermeulen, J.; Vernin, P.; Viola, S.; Vivolo, D.; Werneke, P.; Wiggers, L.; Wilms, J.; de Wolf, E.; van Wooning, R. H. L.; Yatkin, K.; Zachariadou, K.; Zonca, E.; Zornoza, J. D.; Zúñiga, J.; Zwart, A.

    2014-09-01

    The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.

  11. Scanning-free BOTDA based on ultra-fine digital optical frequency comb.

    PubMed

    Jin, Chao; Guo, Nan; Feng, Yuanhua; Wang, Liang; Liang, Hao; Li, Jianping; Li, Zhaohui; Yu, Changyuan; Lu, Chao

    2015-02-23

    We realize a scanning-free Brillouin optical time domain analyzer (BOTDA) based on an ultra-fine digital optical frequency comb (DOFC) with 1.95MHz frequency spacing and 2GHz bandwidth. The DOFC can be used to reconstruct the Brillouin gain spectrum (BGS) and locate the Brillouin frequency shift (BFS) without frequency scanning and thus can improve the measurement speed about 100 times compared with the conventional BOTDA. This scanning-free BOTDA scheme has also been demonstrated experimentally with 51.2m spatial resolution over 10km standard single mode fiber (SSMF) and with resolution of 1.5°C for temperature and 43.3με for strain measurement respectively.

  12. A new method of measuring aerosol optical properties from digital twilight photographs

    NASA Astrophysics Data System (ADS)

    Saito, M.; Iwabuchi, H.

    2015-01-01

    An optimal-estimation algorithm for inferring aerosol optical properties from digital twilight photographs is proposed. The sensitivity of atmospheric components and surface characteristics to brightness and color of twilight sky is investigated, and the results suggest that tropospheric and stratospheric aerosol optical thickness (AOT) are sensitive to condition of the twilight sky. The coarse-fine particle volume ratio is moderately sensitive to the sky condition near the horizon under a clean-atmosphere condition. A radiative transfer model that takes into account a spherical-shell atmosphere, refraction, and multiple scattering is used as a forward model. Error analysis shows that the tropospheric and stratospheric AOT can be retrieved without significant bias. Comparisons with results from other ground-based instruments exhibit reasonable agreement on AOT. A case study suggests that the AOT retrieval method can be applied to atmospheric conditions with varying aerosol vertical profiles and vertically inhomogeneous species in the troposphere.

  13. A new method of measuring aerosol optical properties from digital twilight photographs

    NASA Astrophysics Data System (ADS)

    Saito, M.; Iwabuchi, H.

    2015-10-01

    An optimal-estimation algorithm for inferring aerosol optical properties from digital twilight photographs is proposed. The sensitivity of atmospheric components and surface characteristics to brightness and color of twilight sky is investigated, and the results suggest that tropospheric and stratospheric aerosol optical thickness (AOT) are sensitive to condition of the twilight sky. The coarse-fine particle volume ratio is moderately sensitive to the sky condition near the horizon under a clean-atmosphere condition. A radiative transfer model that takes into account a spherical-shell atmosphere, refraction, and multiple scattering is used as a forward model. Error analysis shows that the tropospheric and stratospheric AOT can be retrieved without significant bias. Comparisons with results from other ground-based instruments exhibit reasonable agreement on AOT. A case study suggests that the AOT retrieval method can be applied to atmospheric conditions with varying aerosol vertical profiles and vertically inhomogeneous species in the troposphere.

  14. Dynamic demonstration of diffractive optic analog-to-digital converter scheme.

    PubMed

    Galt, Sheila; Magnusson, Anders; Hård, Sverker

    2003-01-10

    Dynamic behavior of an analog-to-digital converter (ADC) based on diffractive optical element(s) (DOE)(s) was studied and found to be in agreement with predictions. The analog signal was translated to an angular deflection of a laser beam by means of an acousto-optic (AO) cell. The number of bits in this experimental demonstration was three, using an eight-element DOE array. The maximum sample rate was found to be 2.5 MS/s, the limiting factor being the transit time for the acoustic wave across the width of the laser beam in the AO cell. The study is intended as a first dynamic demonstration of a proposed ADC scheme previously demonstrated in a quasi-static version. The full potential of the ADC scheme will require the use of a fast tunable diode laser to replace the AO deflection scheme used here.

  15. Optical Image Classification Using Optical/digital Hybrid Image Processing Systems.

    NASA Astrophysics Data System (ADS)

    Li, Xiaoyang

    1990-01-01

    Offering parallel and real-time operations, optical image classification is becoming a general technique in the solution of real-life image classification problems. This thesis investigates several algorithms for optical realization. Compared to other statistical pattern recognition algorithms, the Kittler-Young transform can provide more discriminative feature spaces for image classification. We shall apply the Kittler-Young transform to image classification and implement it on optical systems. A feature selection criterion is designed for the application of the Kittler -Young transform to image classification. The realizations of the Kittler-Young transform on both a joint transform correlator and a matrix multiplier are successively conducted. Experiments of applying this technique to two-category and three-category problems are demonstrated. To combine the advantages of the statistical pattern recognition algorithms and the neural network models, processes using the two methods are studied. The Karhunen-Loeve Hopfield model is developed for image classification. This model has significant improvement in the system capacity and the capability of using image structures for more discriminative classification processes. As another such hybrid process, we propose the feature extraction perceptron. The application of feature extraction techniques to the perceptron shortens its learning time. An improved activation function of neurons (dynamic activation function), its design and updating rule for fast learning process and high space-bandwidth product image classification are also proposed. We have shortened by two-thirds the learning time on the feature extraction perceptron as compared with the original perceptron. By using this architecture, we have shown that the classification performs better than both the Kittler-Young transform and the original perceptron.

  16. Subaperture correlation based digital adaptive optics for full field optical coherence tomography.

    PubMed

    Kumar, Abhishek; Drexler, Wolfgang; Leitgeb, Rainer A

    2013-05-06

    This paper proposes a sub-aperture correlation based numerical phase correction method for interferometric full field imaging systems provided the complex object field information can be extracted. This method corrects for the wavefront aberration at the pupil/ Fourier transform plane without the need of any adaptive optics, spatial light modulators (SLM) and additional cameras. We show that this method does not require the knowledge of any system parameters. In the simulation study, we consider a full field swept source OCT (FF SSOCT) system to show the working principle of the algorithm. Experimental results are presented for a technical and biological sample to demonstrate the proof of the principle.

  17. Digital-signal-processor-based dynamic imaging system for optical tomography.

    PubMed

    Lasker, Joseph M; Masciotti, James M; Schoenecker, Matthew; Schmitz, Christoph H; Hielscher, Andreas H

    2007-08-01

    In this article, we introduce a dynamic optical tomography system that is, unlike currently available analog instrumentation, based on digital data acquisition and filtering techniques. At the core of this continuous wave instrument is a digital signal processor (DSP) that collects, collates, processes, and filters the digitized data set. The processor is also responsible for managing system timing and the imaging routines which can acquire real-time data at rates as high as 150 Hz. Many of the synchronously timed processes are controlled by a complex programmable logic device that is also used in conjunction with the DSP to orchestrate data flow. The operation of the system is implemented through a comprehensive graphical user interface designed with LABVIEW software which integrates automated calibration, data acquisition, data organization, and signal postprocessing. Performance analysis demonstrates very low system noise (approximately 1 pW rms noise equivalent power), excellent signal precision (<0.04%-0.2%) and long term system stability (<1% over 40 min). A large dynamic range (approximately 190 dB) accommodates a wide scope of measurement geometries and tissue types. First experiments on tissue phantoms show that dynamic behavior is accurately captured and spatial location can be correctly tracked using this system.

  18. Optical scanning holography based on compressive sensing using a digital micro-mirror device

    NASA Astrophysics Data System (ADS)

    A-qian, Sun; Ding-fu, Zhou; Sheng, Yuan; You-jun, Hu; Peng, Zhang; Jian-ming, Yue; xin, Zhou

    2017-02-01

    Optical scanning holography (OSH) is a distinct digital holography technique, which uses a single two-dimensional (2D) scanning process to record the hologram of a three-dimensional (3D) object. Usually, these 2D scanning processes are in the form of mechanical scanning, and the quality of recorded hologram may be affected due to the limitation of mechanical scanning accuracy and unavoidable vibration of stepper motor's start-stop. In this paper, we propose a new framework, which replaces the 2D mechanical scanning mirrors with a Digital Micro-mirror Device (DMD) to modulate the scanning light field, and we call it OSH based on Compressive Sensing (CS) using a digital micro-mirror device (CS-OSH). CS-OSH can reconstruct the hologram of an object through the use of compressive sensing theory, and then restore the image of object itself. Numerical simulation results confirm this new type OSH can get a reconstructed image with favorable visual quality even under the condition of a low sample rate.

  19. Compressive optical image encryption with two-step-only quadrature phase-shifting digital holography

    NASA Astrophysics Data System (ADS)

    Li, Jun; Li, Hongbing; Li, Jiaosheng; Pan, Yangyang; Li, Rong

    2015-06-01

    An image encryption method which combines two-step-only quadrature phase-shifting digital holography with compressive sensing (CS) has been proposed in the fully optical domain. An object image is firstly encrypted to two on-axis quadrature-phase holograms using the two random phase masks in the Mach-Zehnder interferometer. Then, the two encrypted images are highly compressed to a one-dimensional signal using the single-pixel compressive holographic imaging in the optical domain. At the receiving terminal, the two compressive encrypted holograms are exactly reconstructed from much less than the Nyquist sampling number of observations by solving an optimization problem, and the original image can be decrypted with only two reconstructed holograms and the correct keys. This method largely decreases holograms data volume for the current optical image encryption system, and it is also suitable for some special optical imaging cases such as different wavelengths imaging and weak light imaging. Numerical simulation is performed to demonstrate the feasibility and validity of this novel image encryption method.

  20. Quantum noise in digital x-ray image detectors with optically coupled scintillators

    SciTech Connect

    Flynn, M.J.; Hames, S.M. |; Wilderman, S.J.; Ciarelli, J.J.

    1996-08-01

    Digital x-ray imaging detectors designed to soft x-ray (1 to 50 keV) are significant for medical mammography, dental radiography, microradiography, and microtomography. Detector designs involve either direct absorption of x-rays in solid state devices or thin scintillator screens optically coupled to solid state sensors. Well designed scintillator systems produce 10 or more electrons per detected x-ray and, used with charge coupled devices (CCD), detect 100,000 x-rays per pixel before saturation. However, if the scintillator is directly coupled to the detector, radiation can penetrate to the semiconductor detector with a small number of events producing large charge and noise. The authors have investigated the degradation of image noise by these direct absorption events using numerical models for a laboratory detector system consisting of a 60 {micro}m CsI scintillator optically coupled to a scientific CCD. Monte Carlo methods were used to estimate the charge deposition signal and noise for both the CsI and the semiconductor. Without a fiber optic coupler, direct absorptions dominate the signal and increase the signal variance by a factor of about 30 at energies above 10 keV. With a 3 mm fiber optic coupler, no significant degradation is observed for input energies below 45 keV.

  1. Accurate and reliable segmentation of the optic disc in digital fundus images

    PubMed Central

    Giachetti, Andrea; Ballerini, Lucia; Trucco, Emanuele

    2014-01-01

    Abstract. We describe a complete pipeline for the detection and accurate automatic segmentation of the optic disc in digital fundus images. This procedure provides separation of vascular information and accurate inpainting of vessel-removed images, symmetry-based optic disc localization, and fitting of incrementally complex contour models at increasing resolutions using information related to inpainted images and vessel masks. Validation experiments, performed on a large dataset of images of healthy and pathological eyes, annotated by experts and partially graded with a quality label, demonstrate the good performances of the proposed approach. The method is able to detect the optic disc and trace its contours better than the other systems presented in the literature and tested on the same data. The average error in the obtained contour masks is reasonably close to the interoperator errors and suitable for practical applications. The optic disc segmentation pipeline is currently integrated in a complete software suite for the semiautomatic quantification of retinal vessel properties from fundus camera images (VAMPIRE). PMID:26158034

  2. Tracking Performance Analysis and Simulation of the Digital Pointing System for the Optical Communication Demonstrator

    NASA Astrophysics Data System (ADS)

    Racho, C.; Portillo, A.

    1998-10-01

    Over the past 3 years, JPL has been heavily engaged in designing and developing a reduced-complexity optical communication terminal for high-data-volume applications. The terminal is called the Optical Communication Demonstrator (OCD) and has the ability to point microradian-level beams with a very small number of detectors and steering elements. Using only a single steering mirror and a charge-coupled device (CCD) detector array, the OCD can accomplish the functions of beacon signal acquisition, beacon tracking, transmit and receive beam coalignment, and transmit beam point-ahead offset. At a higher system level, developing an understanding of the OCD performance is an essential part of achieving a better understanding of the end-to-end optical communication system performance in the field. During the latter half of fiscal year 1998, a series of experiments was conducted between Table Mountain and Strawberry Peak using the OCD as a transmitting terminal for terrestrial ground-to- ground optical link demonstrations. The OCD was taken to Strawberry Peak and set up to receive the multibeam laser beacon from the 0.6-meter telescope located at Table Mountain, a distance of approximately 40 kilometers. In the presence of atmospheric effects, the laser beacon will fluctuate both in intensity and position. The ability to determine the performance of the control loop under atmospheric-induced fades and distortion becomes very important in evaluating the results of the field testing. This article describes the design and performance of the OCD digital control loop system, which includes the steering mirror, the CCD detector array tracker, and the associated electronics. The digital control loop performance is a key factor in the ultimate performance of the laser beacon acquisition and tracking algorithm of the OCD. A model of the OCD digital control loop is developed for use in simulations. The analytical results from control loop simulations are compared with measured data

  3. A digital-signal-processor-based optical tomographic system for dynamic imaging of joint diseases

    NASA Astrophysics Data System (ADS)

    Lasker, Joseph M.

    Over the last decade, optical tomography (OT) has emerged as viable biomedical imaging modality. Various imaging systems have been developed that are employed in preclinical as well as clinical studies, mostly targeting breast imaging, brain imaging, and cancer related studies. Of particular interest are so-called dynamic imaging studies where one attempts to image changes in optical properties and/or physiological parameters as they occur during a system perturbation. To successfully perform dynamic imaging studies, great effort is put towards system development that offers increasingly enhanced signal-to-noise performance at ever shorter data acquisition times, thus capturing high fidelity tomographic data within narrower time periods. Towards this goal, I have developed in this thesis a dynamic optical tomography system that is, unlike currently available analog instrumentation, based on digital data acquisition and filtering techniques. At the core of this instrument is a digital signal processor (DSP) that collects, collates, and processes the digitized data set. Complementary protocols between the DSP and a complex programmable logic device synchronizes the sampling process and organizes data flow. Instrument control is implemented through a comprehensive graphical user interface which integrates automated calibration, data acquisition, and signal post-processing. Real-time data is generated at frame rates as high as 140 Hz. An extensive dynamic range (˜190 dB) accommodates a wide scope of measurement geometries and tissue types. Performance analysis demonstrates very low system noise (˜1 pW rms noise equivalent power), excellent signal precision (˜0.04%--0.2%) and long term system stability (˜1% over 40 min). Experiments on tissue phantoms validate spatial and temporal accuracy of the system. As a potential new application of dynamic optical imaging I present the first application of this method to use vascular hemodynamics as a means of characterizing

  4. Scene-of-crime analysis by a 3-dimensional optical digitizer: a useful perspective for forensic science.

    PubMed

    Sansoni, Giovanna; Cattaneo, Cristina; Trebeschi, Marco; Gibelli, Daniele; Poppa, Pasquale; Porta, Davide; Maldarella, Monica; Picozzi, Massimo

    2011-09-01

    Analysis and detailed registration of the crime scene are of the utmost importance during investigations. However, this phase of activity is often affected by the risk of loss of evidence due to the limits of traditional scene of crime registration methods (ie, photos and videos). This technical note shows the utility of the application of a 3-dimensional optical digitizer on different crime scenes. This study aims in fact at verifying the importance and feasibility of contactless 3-dimensional reconstruction and modeling by optical digitization to achieve an optimal registration of the crime scene.

  5. Optical memory device structure using vertical interference from digital thin films

    NASA Astrophysics Data System (ADS)

    Chi, Robert Chih-Jen

    2001-10-01

    The objective of this dissertation research was to create a high-density optical memory device. From an engineering point of view, to create a promising durable optical memory device with high density requires a simple, efficient, effective storage method. This need led to the concept of creating a three-dimensional memory by storage of many bits data in a single physical location. Unlike conventional multi-layer 3D structure, this was accomplished in a single layer structure using a dielectric thin film. The resulting digital thin-film (DTF) structure was investigated in order to prove and demonstrate that the vertical interference properties of micro-scale Fabry-Perot filters array can be used as the basis for optical data storage cells. Optical memory devices are conventionally fabricated by laser beam processing. In this work, a Ga+ focused ion beam was used to ``write'' data on a SiO2 film grown on Si as proof of concept and demonstration of this DTF structure. The use of FIB milling has the advantage of creating smaller data storage elements and higher data density since the ion beam can be focused into a much smaller spot size than that of lasers. The FIB-written data creates a sub-micron structure with multiple bit capacity per physical location and can be read by far-field optical detection methods. A bit density of 5 Gbit in 2 which is roughly double the current storage density of a DVD has been obtained. The extended lifetime of data stored on a robust material such as SiO2/Si produces a data storage option with excellent survival under harsh environment such as high temperature, radiation, etc.

  6. Multichannel analog-to-digital converters based on current mirrors for the optical systems

    NASA Astrophysics Data System (ADS)

    Krasilenko, Vladimir G.; Nikolskyy, A. I.; Nikolska, M. A.; Lobodzinska, R. F.

    2011-12-01

    The paper considers results of designing and modeling analogue-digital converters (ADC) based on current mirrors for the optical systems and neural networks with parallel inputs-outputs. Such ADC, named us multichannel analog-todigital converters based on current mirrors (M ADC CM). Compared with usual converters, for example, reading, a bitby- bit equilibration, and so forth, have a number of advantages: high speed and reliability, simplicity, small power consumption, the big degree of integration in linear and matrix structures. The considered aspects of designing of M_ADC CM in binary codes. Base digit cells (ABC) of such M_ADC CM, series-pipelined are connected in structures, consist from 20-30 CMOS the transistors, one photodiode, have low (1,5-3,5) supply voltage, work in current modes with the maximum values of currents (10-40)μA. Therefore such new principles of realization high-speed low-discharge M_ADC CM have allowed, as have shown modeling experiments, to reach time of transformation less than 20-30 nS at 5-6 bits of a binary code and the general power 1-5 mW. The quantity easily cascadable ABC depends on wordlength ADC, and makes n, and provides quantity of levels of quantization equal N=2n. Such simple enough on structure M ADC CM, having low power consumption <= 3 ÷ 5mW, supply voltage (3-7)V, is provided at the same time with good dynamic characteristics (frequency of digitization even for 1,5μm or 0,35 μm- CMOS-technologies has made 40 MHz, and can be increased 10 times) and accuracy (Δquantization 156,25nA for I max10μA) characteristics is show. The range can be transformed optical signals, taking into account sensitivity of modern photodetectors makes 20-200 μW in such ADC. M_ADC CM open new prospects for realization linear and matrix (with picture operands) micro photoelectronic structures which are necessary for neural networks, digital optoelectronic processors, neurofuzzy controllers, and so forth.

  7. Fusion of UAV photogrammetry and digital optical granulometry for detection of structural changes in floodplains

    NASA Astrophysics Data System (ADS)

    Langhammer, Jakub; Lendzioch, Theodora; Mirijovsky, Jakub

    2016-04-01

    Granulometric analysis represents a traditional, important and for the description of sedimentary material substantial method with various applications in sedimentology, hydrology and geomorphology. However, the conventional granulometric field survey methods are time consuming, laborious, costly and are invasive to the surface being sampled, which can be limiting factor for their applicability in protected areas.. The optical granulometry has recently emerged as an image analysis technique, enabling non-invasive survey, employing semi-automated identification of clasts from calibrated digital imagery, taken on site by conventional high resolution digital camera and calibrated frame. The image processing allows detection and measurement of mixed size natural grains, their sorting and quantitative analysis using standard granulometric approaches. Despite known limitations, the technique today presents reliable tool, significantly easing and speeding the field survey in fluvial geomorphology. However, the nature of such survey has still limitations in spatial coverage of the sites and applicability in research at multitemporal scale. In our study, we are presenting novel approach, based on fusion of two image analysis techniques - optical granulometry and UAV-based photogrammetry, allowing to bridge the gap between the needs of high resolution structural information for granulometric analysis and spatially accurate and data coverage. We have developed and tested a workflow that, using UAV imaging platform enabling to deliver seamless, high resolution and spatially accurate imagery of the study site from which can be derived the granulometric properties of the sedimentary material. We have set up a workflow modeling chain, providing (i) the optimum flight parameters for UAV imagery to balance the two key divergent requirements - imagery resolution and seamless spatial coverage, (ii) the workflow for the processing of UAV acquired imagery by means of the optical

  8. Laser speckle based digital optical methods in structural mechanics: A review

    NASA Astrophysics Data System (ADS)

    De la Torre, I. Manuel; Hernández Montes, María del Socorro; Flores-Moreno, J. Mauricio; Santoyo, Fernando Mendoza

    2016-12-01

    Laser Speckle Correlation, Electronic Speckle Pattern Interferometry and Digital Holographic interferometry have evolved for decades to become relevant techniques in many fields of today's wide spectrum of knowledge and disciplines. Indeed, with today's advances in optics, photonics, electronics and computing there are many important applications for them and strictly speaking there are an almost infinite number of applications that one can think of, as they are non-contact optical techniques that can be used to measure mechanical parameters ranging from a few microns to hundreds of nanometers. In this review we will explore and discuss some relevant applications in structural mechanics in the fields of materials in engineering, biomedical and art preservation and restoration. This work will take the reader from a succinct historical account on the development of these techniques, followed by a brief theoretical description for each one that will then facilitate the introduction of the results chosen as the key applications, ending the review with the conclusions. From the myriad of papers now available in the web, we will only present those that we believe are the most illustrative applications within three lustrum, 2000 to 2015, all set to give a frame that place these optical techniques as mature technologies with an absolute relevance to conduct metrology in many fields.

  9. On line measurement of lag angle in optical fiber winding using digital image processing technology

    NASA Astrophysics Data System (ADS)

    Ma, Baoji; Zhu, Yuquan; Jin, Xiaoli; Zhang, Jun

    2008-12-01

    During the optical fiber winding, larger or smaller lag angle would lead to superposition or spacing winding which would seriously influence the quality and stability of optical fiber bobbin. So the precise measurement and control of the lag angle was a key technique in optical fiber precise winding. Based on computer digital image technology, a new measurement scheme was proposed. According to the measurement requests, hardware of the image collection system and the image processing system were designed. By means of the image collection system and the designed program, the lag angle image was successfully collected. The resolution and efficiency of the Hough transform and the concentric cirque seeking method for image recognition were tested. The results showed that the efficiency of the Hough transform and the concentric cirque seeking method is low. So an improved Hough transform method was developed and the efficiency was numerically tested. The results showed that the improved Hough transform method was much more efficient and 0.1° measurement error of the lag angle can be achieved.

  10. Shack-Hartmann sensor based optical quality testing of whole slide imaging systems for digital pathology

    NASA Astrophysics Data System (ADS)

    Shakeri, S. M.; Hulsken, Bas; van Vliet, Lucas J.; Stallinga, Sjoerd

    2015-03-01

    Whole Slide Imaging (WSI) systems are used in the emerging field of digital pathology for capturing high-resolution images of tissue slides at high throughput. We present a technique to measure the optical aberrations of WSI systems using a Shack-Hartmann wavefront sensor as a function of field position. The resulting full-field aberration maps for the lowest order astigmatism and coma are analyzed using nodal aberration theory. According to this theory two coefficients describe the astigmatism and coma inherent to the optical design and another six coefficients are needed to describe the cumulative effects of all possible misalignments on astigmatism and coma. The nodal aberration theory appears to fit well to the experimental data. We have measured and analyzed the full-field aberration maps for two different objective lens-tube lens assemblies and found that only the optical design related astigmatism coefficient differed substantially between the two cases, but in agreement with expectations. We have also studied full-field aberration maps for intentional decenter and tilt and found that these affect the misalignment coefficient for constant coma (decenter) and the misalignment coefficient for linear astigmatism (tilt), while keeping all other nodal aberration theory coefficients constant.

  11. Intracellular Calcium Gradients in Single Living Cells: Measurement and Analysis by Optical and Digital Techniques

    NASA Astrophysics Data System (ADS)

    Yelamarty, Rao Viswanadha

    Intracellular calcium (Ca^{2+ }) has been considered as a regulator of many cellular processes. In addition, Ca^{2+ } also plays a key role in mediating actions of many hormones, growth factors, and drugs. This thesis describes two general approaches, digital video and photomultiplier (PMT) based fluorescence microscopic systems, to measure such Ca^{2+} changes throughout the cell. They reveal the heterogeneous spatial and fast temporal changes of Ca^{2+} within a single isolated living cell. In order to measure spatial Ca^ {2+} in three dimensions (3-D), optical section microscopy (OSM) coupled to digital video imaging is introduced. With this approach, an increase in nuclear Ca^{2+} compared to cytosolic Ca^{2+} is detected in human erythroblasts and rat hepatocytes under the addition of growth factors: erythropoietin and epidermal growth factor respectively. In addition, the primary effect of non growth-promoting hormone vasopressin, raise in cytosolic Ca^{2+}, is also observed. These observations are the first to underscore the importance of nuclear Ca^{2+} increase in cell growth and differentiation. On the other hand, to track fast Ca^ {2+} transients (mesc) during excitation -contraction (EC) cycle and then examine alterations in Ca^{2+} transients in healthy and diseased (hypertensive) heart cells, a PMT based system is implemented. Significant alterations in Ca^{2+} transients in hypertensive heart cells were observed. This finding is compatible with the clinical finding that patients with hypertensive cardiomyopathy suffer a lack of adequate relaxation. Finally, to correlate the Ca^{2+} dynamics in an EC cycle with mechanical activity, a hybrid optical digital processor was developed. The performance of the hybrid processor is analyzed and applied simultaneously with the PMT based system. The mechanical contraction and relaxation of a single cardiac cell closely paralleled that of Ca^{2+} dynamics during an EC cycle. In summary, this thesis illustrates

  12. Focusing light through scattering media by full-polarization digital optical phase conjugation.

    PubMed

    Shen, Yuecheng; Liu, Yan; Ma, Cheng; Wang, Lihong V

    2016-03-15

    Digital optical phase conjugation (DOPC) is an emerging technique for focusing light through or within scattering media such as biological tissue. Since DOPC systems are based on time reversal, they benefit from collecting as much information about the scattered light as possible. However, existing DOPC techniques record and subsequently phase-conjugate the scattered light in only a single-polarization state, limited by the operating principle of spatial light modulators. Here, we develop the first, to the best of our knowledge, full-polarization DOPC system that records and phase-conjugates scattered light along two orthogonal polarizations. When focusing light through thick scattering media, such as 2 mm and 4 mm-thick chicken breast tissue, our full-polarization DOPC system on average doubles the focal peak-to-background ratio achieved by single-polarization DOPC systems and improves the phase-conjugation fidelity.

  13. On the performance of multichannel digital backpropagation in high-capacity long-haul optical transmission.

    PubMed

    Liga, Gabriele; Xu, Tianhua; Alvarado, Alex; Killey, Robert I; Bayvel, Polina

    2014-12-01

    The performance of digital backpropagation (DBP) equalization when applied over multiple channels to compensate for the nonlinear impairments in optical fiber transmission systems is investigated. The impact of a suboptimal multichannel DBP operation is evaluated, where implementation complexity is reduced by varying parameters such as the number of nonlinear steps per span and sampling rate. Results have been obtained for a reference system consisting of a 5×32 Gbaud PDM-16QAM superchannel with 33 GHz subchannel spacing and Nyquist pulse shaping under long-haul transmission. The reduction in the effectiveness of the algorithm is evaluated and compared with the ideal gain expected from the cancellation of the nonlinear signal distortion. The detrimental effects of polarization mode dispersion (PMD) with varying DBP bandwidth are also studied. Key parameters which ensure the effectiveness of multichannel DBP are identified.

  14. On nonlinearly-induced noise in single-channel optical links with digital backpropagation.

    PubMed

    Beygi, Lotfollah; Irukulapati, Naga V; Agrell, Erik; Johannisson, Pontus; Karlsson, Magnus; Wymeersch, Henk; Serena, Paolo; Bononi, Alberto

    2013-11-04

    In this paper, we investigate the performance limits of electronic chromatic dispersion compensation (EDC) and digital backpropagation (DBP) for a single-channel non-dispersion-managed fiber-optical link. A known analytical method to derive the performance of the system with EDC is extended to derive a first-order approximation for the performance of the system with DBP. In contrast to the cubic growth of the variance of the nonlinear noise-like interference, often called nonlinear noise, with input power for EDC, a quadratic growth is observed with DBP using this approximation. Finally, we provide numerical results to verify the accuracy of the proposed approach and compare it with existing analytical models.

  15. XMM-NEWTON AND OPTICAL OBSERVATIONS OF CATACLYSMIC VARIABLES FROM THE SLOAN DIGITAL SKY SURVEY

    SciTech Connect

    Hilton, Eric J.; Szkody, Paula; Mukadam, Anjum; Henden, Arne; Dillon, William; Schmidt, Gary D. E-mail: szkody@astro.washington.edu

    2009-03-15

    We report on XMM-Newton and optical results for six cataclysmic variables that were selected from Sloan Digital Sky Survey (SDSS) spectra because they showed strong He II emission lines, indicative of being candidates for containing white dwarfs with strong magnetic fields. While high X-ray background rates prevented optimum results, we are able to confirm SDSS J233325.92+152222.1 as an intermediate polar from its strong pulse signature at 21 minutes and its obscured hard X-ray spectrum. Ground-based circular polarization and photometric observations were also able to confirm SDSS J142256.31 - 022108.1 as a polar with a period near 4 hr. Photometry of SDSS J083751.00+383012.5 and SDSS J093214.82+495054.7 solidifies the orbital period of the former as 3.18 hr and confirms the latter as a high-inclination system with deep eclipses.

  16. Modulation format dependence of digital nonlinearity compensation performance in optical fibre communication systems.

    PubMed

    Xu, Tianhua; Shevchenko, Nikita A; Lavery, Domaniç; Semrau, Daniel; Liga, Gabriele; Alvarado, Alex; Killey, Robert I; Bayvel, Polina

    2017-02-20

    The relationship between modulation format and the performance of multi-channel digital back-propagation (MC-DBP) in ideal Nyquist-spaced optical communication systems is investigated. It is found that the nonlinear distortions behave independent of modulation format in the case of full-field DBP, in contrast to the cases of electronic dispersion compensation and partial-bandwidth DBP. It is shown that the minimum number of steps per span required for MC-DBP depends on the chosen modulation format. For any given target information rate, there exists a possible trade-off between modulation format and back-propagated bandwidth, which could be used to reduce the computational complexity requirement of MC-DBP.

  17. Focusing light through scattering media by full-polarization digital optical phase conjugation

    PubMed Central

    Shen, Yuecheng; Liu, Yan; Ma, Cheng; Wang, Lihong V.

    2016-01-01

    Digital optical phase conjugation (DOPC) is an emerging technique for focusing light through or within scattering media such as biological tissue. Since DOPC systems are based on time reversal, they benefit from collecting as much information about the scattered light as possible. However, existing DOPC techniques record and subsequently phase-conjugate the scattered light in only a single polarization state, limited by the operating principle of spatial light modulators. Here, we develop the first full-polarization DOPC system which records and phase-conjugates scattered light along two orthogonal polarizations. When focusing light through thick scattering media, such as 2 mm and 4 mm thick chicken breast tissue, our full-polarization DOPC system on average doubles the focal peak-to-background ratio achieved by single-polarization DOPC systems and improves the phase conjugation fidelity. PMID:26977651

  18. Analysis of a dual-reflector antenna system using physical optics and digital computers

    NASA Technical Reports Server (NTRS)

    Schmidt, R. F.

    1972-01-01

    The application of physical-optics diffraction theory to a deployable dual-reflector geometry is discussed. The methods employed are not restricted to the Conical-Gregorian antenna, but apply in a general way to dual and even multiple reflector systems. Complex vector wave methods are used in the Fresnel and Fraunhofer regions of the reflectors. Field amplitude, phase, polarization data, and time average Poynting vectors are obtained via an IBM 360/91 digital computer. Focal region characteristics are plotted with the aid of a CalComp plotter. Comparison between the GSFC Huygens wavelet approach, JPL measurements, and JPL computer results based on the near field spherical wave expansion method are made wherever possible.

  19. Two bit optical analog-to-digital converter based on photonic crystals.

    PubMed

    Miao, Binglin; Chen, Caihua; Sharkway, Ahmed; Shi, Shouyuan; Prather, Dennis W

    2006-08-21

    In this paper, we demonstrate a 2-bit optical analog-to-digital (A/D) converter. This converter consists of three cascaded splitters constructed in a self-guiding photonic crystal through the perturbation of the uniform lattice. The A/D conversion is achieved by adjusting splitting ratios of the splitters through changing the degree of perturbation. In this way, output ports reach a state of '1' at different input power levels to generate unique states desired for an A/D converter. To validate this design concept, we first experimentally characterize the relation between the splitting ratio and the degree of lattice perturbation. Based on this understanding, we then fabricate the 2-bit A/D converter and successfully observe four unique states corresponding to different power levels of input analog signal.

  20. Characterization and Design of Digital Pointing Subsystem for Optical Communication Demonstrator

    NASA Technical Reports Server (NTRS)

    Racho, C.; Portillo, A.

    1998-01-01

    The Optical Communications Demonstrator (OCD) is a laboratory-based lasercom demonstration terminal designed to validate several key technologies, including beacon acquisition, high bandwidth tracking, precision bearn pointing, and point-ahead compensation functions. It has been under active development over the past few years. The instrument uses a CCD array detector for both spatial acquisition and high-bandwidth tracking, and a fiber coupled laser transmitter. The array detector tracking concept provides wide field-of-view acquisition and permits effective platform jitter compensation and point-ahead control using only one steering mirror. This paper describes the detailed design and characterization of the digital control loop system which includes the Fast Steering Mirror (FSM), the CCD image tracker, and the associated electronics. The objective is to improve the overall system performance using laboratory measured data. The. design of the digital control loop is based on a linear time invariant open loop model. The closed loop performance is predicted using the theoretical model. With the digital filter programmed into the OCD control software, data is collected to verify the predictions. This paper presents the results of the, system modeling and performance analysis. It has been shown that measurement data closely matches theoretical predictions. An important part of the laser communication experiment is the ability of FSM to track the laser beacon within the. required tolerances. The pointing must be maintained to an accuracy that is much smaller than the transmit signal beamwidth. For an earth orbit distance, the system must be able to track the receiving station to within a few microradians. The failure. to do so will result in a severely degraded system performance.

  1. Optical Flow in a Smart Sensor Based on Hybrid Analog-Digital Architecture

    PubMed Central

    Guzmán, Pablo; Díaz, Javier; Agís, Rodrigo; Ros, Eduardo

    2010-01-01

    The purpose of this study is to develop a motion sensor (delivering optical flow estimations) using a platform that includes the sensor itself, focal plane processing resources, and co-processing resources on a general purpose embedded processor. All this is implemented on a single device as a SoC (System-on-a-Chip). Optical flow is the 2-D projection into the camera plane of the 3-D motion information presented at the world scenario. This motion representation is widespread well-known and applied in the science community to solve a wide variety of problems. Most applications based on motion estimation require work in real-time; hence, this restriction must be taken into account. In this paper, we show an efficient approach to estimate the motion velocity vectors with an architecture based on a focal plane processor combined on-chip with a 32 bits NIOS II processor. Our approach relies on the simplification of the original optical flow model and its efficient implementation in a platform that combines an analog (focal-plane) and digital (NIOS II) processor. The system is fully functional and is organized in different stages where the early processing (focal plane) stage is mainly focus to pre-process the input image stream to reduce the computational cost in the post-processing (NIOS II) stage. We present the employed co-design techniques and analyze this novel architecture. We evaluate the system’s performance and accuracy with respect to the different proposed approaches described in the literature. We also discuss the advantages of the proposed approach as well as the degree of efficiency which can be obtained from the focal plane processing capabilities of the system. The final outcome is a low cost smart sensor for optical flow computation with real-time performance and reduced power consumption that can be used for very diverse application domains. PMID:22319283

  2. Sequential-digital image correlation for mapping human posterior sclera and optic nerve head deformation.

    PubMed

    Pyne, Jeffrey D; Genovese, Katia; Casaletto, Luciana; Vande Geest, Jonathan P

    2014-02-01

    Optic nerve head (ONH) deformations may be involved in the onset or further development of glaucoma, including in patients with relatively normal intraocular pressures (IOPs). Characterizing posterior scleral deformations over physiological pressures may provide a better understanding of how changes in IOP lead to changes in the mechanical environment of the ONH and possibly retinal ganglion cell death. Pressure inflation measurement test protocols are commonly used to measure deformation of the peripapillary sclera with full-field noncontact optical methods. The purpose of this work was to develop and validate a new sequential 3D digital image correlation (S-DIC) approach for quantification of posterior scleral pressure induced deformation that improves z (in-depth) resolution of the DIC measurement without losing in-plane sensitivity, while also being able to contour and map deformations of the complex-shaped ONH. Our approach combines two orthogonal axes of parallax with standard 3D DIC methods using a single high-resolution camera. The enhanced capabilities of S-DIC with respect to standard 3D DIC has been demonstrated by carrying out a complete benchmark for shape, deformation, and strain measurement on an object of known complex geometry. Our S-DIC method provided a reconstruction accuracy of 0.17% and an uncertainty in z-position measurement of 8 μm. The developed methodology has also been applied to a human posterior scleral shell, including the full peripapillary sclera and optic nerve. The relatively inexpensive S-DIC approach may provide new information on the biomechanical deformations of the optic nerve head and, thus, the death of retinal ganglion cells in primary open angle glaucoma.

  3. Digital holographic interferometry: A novel optical calorimetry technique for radiation dosimetry

    SciTech Connect

    Cavan, Alicia; Meyer, Juergen

    2014-02-15

    Purpose: To develop and demonstrate the proof-of-principle of a novel optical calorimetry method to determine radiation absorbed dose in a transparent medium. Methods: The calorimetric property of water is measured during irradiation by means of an interferometer, which detects temperature-induced changes in the refractive index that can be mathematically related to absorbed dose. The proposed method uses a technique called digital holographic interferometry (DHI), which comprises an optical laser interferometer setup and consecutive physical reconstruction of the recorded wave fronts by means of the Fresnel transform. This paper describes the conceptual framework and provides the mathematical basis for DHI dosimetry. Dose distributions from a high dose rate Brachytherapy source were measured by a prototype optical setup to demonstrate the feasibility of the approach. Results: The developed DHI dosimeter successfully determined absorbed dose distributions in water in the region adjacent to a high dose rate Brachytherapy source. A temperature change of 0.0381 K across a distance of 6.8 mm near the source was measured, corresponding to a dose of 159.3 Gy. The standard deviation in a typical measurement set was ±3.45 Gy (corresponding to an uncertainty in the temperature value of ±8.3 × 10{sup −4} K). The relative dose fall off was in agreement with treatment planning system modeled data. Conclusions: First results with a prototype optical setup and a Brachytherapy source demonstrate the proof-of-principle of the approach. The prototype achieves high spatial resolution of approximately 3 × 10{sup −5} m. The general approach is fundamentally independent of the radiation type and energy. The sensitivity range determined indicates that the method is predominantly suitable for high dose rate applications. Further work is required to determine absolute dose in all three dimensions.

  4. Measurement of impinging butane flame using combined optical system with digital speckle tomography

    NASA Astrophysics Data System (ADS)

    Ko, Han Seo; Ahn, Seong Soo; Kim, Hyun Jung

    2011-11-01

    Three-dimensional density distributions of an impinging and eccentric flame were measured experimentally using a combined optical system with digital speckle tomography. In addition, a three-dimensional temperature distribution of the flame was reconstructed from an ideal gas equation based on the reconstructed density data. The flame was formed by the ignition of premixed butane/air from air holes and impinged upward against a plate located 24 mm distance from the burner nozzle. In order to verify the reconstruction process for the experimental measurements, numerically synthesized phantoms of impinging and eccentric flames were derived and reconstructed using a developed three-dimensional multiplicative algebraic reconstruction technique (MART). A new scanning technique was developed for the accurate analysis of speckle displacements necessary for investigating the wall jet regions of the impinging flame at which a sharp variation of the flow direction and pressure gradient occur. The reconstructed temperatures by the digital speckle tomography were applied to the boundary condition for numerical analysis of a flame impinged plate. Then, the numerically calculated temperature distribution of the upper side of the flame impinged plate was compared to temperature data taken by an infrared camera. The absolute average uncertainty between the numerical and infrared camera data was 3.7%.

  5. Optical parameters and space-bandwidth product optimization in digital holographic microscopy.

    PubMed

    Claus, Daniel; Iliescu, Daciana

    2013-01-01

    This paper considers some of the most important optical parameters that characterize a digital holographic microscope (DHM) and presents their mathematical derivation based on geometrical and diffraction-based models. It supports and justifies the use of the out-of-focus recording of holograms by showing that the field of view can be increased when recording the hologram in front of the in-focus image plane. In this manner a better match between the space-bandwidth product (SBP) of the microscope objective and that of the reconstructed hologram can be obtained. Hence, DHM offers a more cost-efficient way to increase the recorded SBP compared to the application of a high-quality microscope objective (large numerical aperture and low magnification) used in conventional microscopy. Furthermore, an expression for the imaging distance (distance between hologram and image plane), while maintaining the optical resolution and sufficient sampling, is obtained. This expression takes into account all kinds of reference-wave curvature and can easily be transferred to lensless digital holography. In this context it could be demonstrated that an object wave matched reference wave offers a significantly smaller imaging distance and hence the largest recoverable SBP. In addition, a new, to our knowledge, approach, based on the influence of defocus on the modulation transfer function, is used to derive the depth of field (DOF) for a circular aperture (lens-based system) and a rectangular aperture (lensless system), respectively. This investigation leads to the finding that a rectangular aperture offers an increased resolution combined with an increased DOF, when compared to a circular aperture of the same size.

  6. The research and realization of digital management platform for ultra-precision optical elements within life-cycle

    NASA Astrophysics Data System (ADS)

    Wang, Juan; Wang, Jian; Li, Lijuan; Zhou, Kun

    2014-08-01

    In order to solve the information fusion, process integration, collaborative design and manufacturing for ultra-precision optical elements within life-cycle management, this paper presents a digital management platform which is based on product data and business processes by adopting the modern manufacturing technique, information technique and modern management technique. The architecture and system integration of the digital management platform are discussed in this paper. The digital management platform can realize information sharing and interaction for information-flow, control-flow and value-stream from user's needs to offline in life-cycle, and it can also enhance process control, collaborative research and service ability of ultra-precision optical elements.

  7. Two-dimensional mapping of electro-optic phase retardation in lithium niobate crystals by digital holography.

    PubMed

    de Angelis, M; De Nicola, S; Finizio, A; Pierattini, G; Ferraro, P; Grilli, S; Paturzo, M; Sansone, L; Alfieri, D; De Natale, P

    2005-07-01

    We demonstrate accurate two-dimensional mapping of the phase retardation induced by the electro-optic effect in lithium niobate crystals. Off-axis digital holography is used to investigate congruent z-cut crystals. The spatially resolved optical path difference is interferometrically measured while a linearly rising voltage ramp is applied to the crystal. This procedure provides information on the uniformity of crystals' electro-optic properties and offers the ability to detect the presence of defects that is of fundamental importance for reliable processing of photonic devices.

  8. Novel Perspectives on the Characterization of Species-Dependent Optical Signatures of Bacterial Colonies by Digital Holography

    PubMed Central

    Buzalewicz, Igor; Kujawińska, Małgorzata; Krauze, Wojciech; Podbielska, Halina

    2016-01-01

    The use of light diffraction for the microbiological diagnosis of bacterial colonies was a significant breakthrough with widespread implications for the food industry and clinical practice. We previously confirmed that optical sensors for bacterial colony light diffraction can be used for bacterial identification. This paper is focused on the novel perspectives of this method based on digital in-line holography (DIH), which is able to reconstruct the amplitude and phase properties of examined objects, as well as the amplitude and phase patterns of the optical field scattered/diffracted by the bacterial colony in any chosen observation plane behind the object from single digital hologram. Analysis of the amplitude and phase patterns inside a colony revealed its unique optical properties, which are associated with the internal structure and geometry of the bacterial colony. Moreover, on a computational level, it is possible to select the desired scattered/diffracted pattern within the entire observation volume that exhibits the largest amount of unique, differentiating bacterial features. These properties distinguish this method from the already proposed sensing techniques based on light diffraction/scattering of bacterial colonies. The reconstructed diffraction patterns have a similar spatial distribution as the recorded Fresnel patterns, previously applied for bacterial identification with over 98% accuracy, but they are characterized by both intensity and phase distributions. Our results using digital holography provide new optical discriminators of bacterial species revealed in one single step in form of new optical signatures of bacterial colonies: digital holograms, reconstructed amplitude and phase patterns, as well as diffraction patterns from all observation space, which exhibit species-dependent features. To the best of our knowledge, this is the first report on bacterial colony analysis via digital holography and our study represents an innovative approach

  9. Novel Perspectives on the Characterization of Species-Dependent Optical Signatures of Bacterial Colonies by Digital Holography.

    PubMed

    Buzalewicz, Igor; Kujawińska, Małgorzata; Krauze, Wojciech; Podbielska, Halina

    2016-01-01

    The use of light diffraction for the microbiological diagnosis of bacterial colonies was a significant breakthrough with widespread implications for the food industry and clinical practice. We previously confirmed that optical sensors for bacterial colony light diffraction can be used for bacterial identification. This paper is focused on the novel perspectives of this method based on digital in-line holography (DIH), which is able to reconstruct the amplitude and phase properties of examined objects, as well as the amplitude and phase patterns of the optical field scattered/diffracted by the bacterial colony in any chosen observation plane behind the object from single digital hologram. Analysis of the amplitude and phase patterns inside a colony revealed its unique optical properties, which are associated with the internal structure and geometry of the bacterial colony. Moreover, on a computational level, it is possible to select the desired scattered/diffracted pattern within the entire observation volume that exhibits the largest amount of unique, differentiating bacterial features. These properties distinguish this method from the already proposed sensing techniques based on light diffraction/scattering of bacterial colonies. The reconstructed diffraction patterns have a similar spatial distribution as the recorded Fresnel patterns, previously applied for bacterial identification with over 98% accuracy, but they are characterized by both intensity and phase distributions. Our results using digital holography provide new optical discriminators of bacterial species revealed in one single step in form of new optical signatures of bacterial colonies: digital holograms, reconstructed amplitude and phase patterns, as well as diffraction patterns from all observation space, which exhibit species-dependent features. To the best of our knowledge, this is the first report on bacterial colony analysis via digital holography and our study represents an innovative approach

  10. Optical characterization of MEMS micro-mirror arrays using digital holographic Shack-Hartmann wavefront sensor: a new technique

    NASA Astrophysics Data System (ADS)

    Anisimov, Igor; Dooley, Sarah B.

    2011-05-01

    Micro-Electro-Mechanical Systems (MEMS) Micro-Mirror Arrays (MMAs) are widely used in advanced laser beam steering systems and as adaptive optical elements. The new generation of MEMS MMAs are fabricated by bulk micromachining of a single Silicon-On-Insulator wafer. Optical characterization of MEMS MMAs can be done by direct detection of the reflected beams or by using more advanced wavefront measuring techniques, such as a phase-shifting interferometer or Shack-Hartmann wavefront sensor. In the case of an interferometer, the geometry of the tested MMA can be calculated after performing the phase unwrapping procedure, which can be quite complex. In the latter case of the Shack-Hartmann wavefront sensor, careful selection of a highquality array of microlenses is required in order to match the capabilities of the wavefront sensor to the measured wavefront produced by the MMA. The presented digital Shack-Hartmann technique is a modified approach for wavefront characterization based on digital processing of the interferometer data. The optical wavefront from the tested MMA is mixed with the reference wavefront. Then the recorded interference intensity image is Fourier transformed producing digitally synthesized images of the optical beams in the far field. Therefore, the digital version of the Shack-Hartmann wavefront sensor does not require the use of an array of microlenses and is primarily limited by the detector array geometry. One can digitally generate any configuration of subapertures corresponding to various geometries of microlenses. However, this new technique does require coherent optical mixing of the two wavefronts in order to produce the interference pattern.

  11. The digital optical module - How IceCube will acquire data

    SciTech Connect

    Stokstad, R.G.

    2003-01-09

    IceCube will be a km-scale neutrino detector consisting of 4800 optical modules (OMs) on 80 strings of 60 OMs each. The DAQ technology will have the following desirable features: (1) the robustness of copper cable between the OMs and the surface. (2) digitization and time-stamping of signals that are unattenuated and undispersed. (3) calibration methods (particularly for timing) appropriate for a large number of OMs. The PMT anode waveform is digitized and time-stamped in the OM. The time calibration procedure is both accurate and automatic. A system having these features has been tested in AMANDA. A prototype digital system consisting of 40 OMs was deployed in Jan., 2000. The principal components of the Digital Optical Module (DOM) signal processing circuitry are: the analog transient waveform digitizer (ATWD), a low-power custom integrated circuit that captures the waveform in 128 samples at a rate of {approx}500 Megasamples/s; an ADC operating at {approx}30 MS/s covering several microseconds; a FPGA that provides state control, time stamps events, handles communications, etc.; a low-power 32-bit ARM CPU with a real-time operating system. A 16.8 MHz oscillator, made by Toyocom, is free-running, very stable ({delta}f/f {approx} 5 {center_dot} 10{sup -11} over {approx} 5s) and provides clock signals to several components. Short (12 m) cables connecting adjacent modules enable a local time coincidence, which eliminates most of the {approx}1 kHz of dark noise pulses. A critical requirement is the ability to calibrate the DOM oscillator against a master clock at the surface. In essence, timing pulses sent in one direction at known time intervals can be used to determine relative frequency, and the round trip time of pulses sent in both directions can determine the offset. After receiving a timing pulse at the DOM and waiting for a short time, {delta}t, measured on the DOM clock, a pulse is sent from the DOM to the surface. The shapes of the pulses sent down and up are

  12. Optical position sensor based on a digital wavelength-encoding grating ruler

    NASA Astrophysics Data System (ADS)

    Wang, Yu; Chen, Huoyao; Liu, Zhengkun; Hong, Yilin

    2016-10-01

    A wavelength-encoding optical position sensor was designed in this study. The critical component of the sensor is its innovative digital encoding grating ruler (DEGR), which is a substrate on which several blazed grating units with different line densities are arranged parallel to one another following a certain order. Two types of multi-DEGR were designed. We obtained over 100,000 codes that significantly assisted in designing long-range and high-resolution position sensors by optimizing the coding algorithm. The wavelength signals generated by the multi-DEGR were demodulated using concave grating and several photosensitive elements. A 100-mm multi-DEGR with 1000 codes was successfully fabricated using the combined methods of direct laser writing and holographic technology. We described the principle of the sensor in detail and established the entire sensor system. A bench test was conducted to test the signal response of the sensor. Bench test results exhibited 100% accuracy of the signal response of the optical sensor and an excellent temperature performance within -55°C and 75°C.

  13. High-Speed Microscale Optical Tracking Using Digital Frequency-Domain Multiplexing

    PubMed Central

    MacLachlan, Robert A.; Riviere, Cameron N.

    2010-01-01

    Position-sensitive detectors (PSDs), or lateral-effect photodiodes, are commonly used for high-speed, high-resolution optical position measurement. This paper describes the instrument design for multidimensional position and orientation measurement based on the simultaneous position measurement of multiple modulated sources using frequency-domain-multiplexed (FDM) PSDs. The important advantages of this optical configuration in comparison with laser/mirror combinations are that it has a large angular measurement range and allows the use of a probe that is small in comparison with the measurement volume. We review PSD characteristics and quantitative resolution limits, consider the lock-in amplifier measurement system as a communication link, discuss the application of FDM to PSDs, and make comparisons with time-domain techniques. We consider the phase-sensitive detector as a multirate DSP problem, explore parallels with Fourier spectral estimation and filter banks, discuss how to choose the modulation frequencies and sample rates that maximize channel isolation under design constraints, and describe efficient digital implementation. We also discuss hardware design considerations, sensor calibration, probe construction and calibration, and 3-D measurement by triangulation using two sensors. As an example, we characterize the resolution, speed, and accuracy of an instrument that measures the position and orientation of a 10 mm × 5 mm probe in 5 degrees of freedom (DOF) over a 30-mm cube with 4-μm peak-to-peak resolution at 1-kHz sampling. PMID:20428484

  14. Optical phase analysis in drilled cortical porcine bones using digital holographic interferometry

    NASA Astrophysics Data System (ADS)

    Tavera R., César G.; De la Torre I., Manuel H.; Flores M., J. Mauricio; Luna H., Juan M.; Briones R., Manuel de J.; Mendoza S., Fernando

    2016-03-01

    A study in porcine femoral bones with and without the presence of cortical drilling is presented. An out of plane digital holographic interferometer is used to retrieve the optical phase during the controlled compression tests. These tests try to simulate physiological deformations in postmortem healthy bones and compare their mechanical response with those having a cortical hole. The cortical drilling technique is widely used in medical procedures to fix plaques and metallic frames to a bone recovering from a fracture. Several materials and drilling techniques are used for this purpose. In this work we analyze the superficial variations of the bone when different drilling diameters are used. By means of the optical phase it is possible to recover the superficial deformation of the tissue during a controlled deformation with high resolution. This information could give a better understand about the micro structural variations of the bone instead of a bulk response. As proof of principle, several tests were performed to register the modes and ranges of the displacements for compressive loads. From these tests notorious differences are observed between both groups of bones, having less structural stiffness the drilled ones as expected. However, the bone's characteristic to absorb and adjust itself due the load is also highly affected according to the number of holes. Results from different kind of samples (undrilled and drilled) are presented and discussed in this work.

  15. Continuous monitoring of large civil structures using a digital fiber optic motion sensor system

    NASA Astrophysics Data System (ADS)

    Hodge, Malcolm H.; Kausel, Theodore C., Jr.

    1998-03-01

    There is no single attribute which can always predict structural deterioration. Accordingly, we have developed a scheme for monitoring a wide range of incipient deterioration parameters, all based on a single motion sensor concept. In this presentation, we describe how an intrinsically low power- consumption fiber optic harness can be permanently deployed to poll an array of optical sensors. The function and design of these simple, durable, and naturally digital sensors is described, along with the manner in which they have been configured to collect information for changes in the most important structural aspects. The SIMS system is designed to interrogate each sensor up to five-thousand times per second for the life of the structure, and to report sensor data back to a remote computer base for current and long-term analysis, and is directed primarily towards bridges. By suitably modifying the actuation of this very precise motion sensor, SIMS is able to track bridge deck deflection and vibration, expansion joint travel, concrete and rebar corrosion, pothole development, pier scour and tilt. Other sensors will track bolt clamp load, cable tension, and metal fatigue. All of these data are received within microseconds, which means that appropriate computer algorithm manipulations can be carried out to correlate one sensor with other sensors in real time. This internal verification feature automatically enhances confidence in the system's predictive ability and alerts the user to any anomalous behavior.

  16. High-Speed Microscale Optical Tracking Using Digital Frequency-Domain Multiplexing.

    PubMed

    Maclachlan, Robert A; Riviere, Cameron N

    2009-06-01

    Position-sensitive detectors (PSDs), or lateral-effect photodiodes, are commonly used for high-speed, high-resolution optical position measurement. This paper describes the instrument design for multidimensional position and orientation measurement based on the simultaneous position measurement of multiple modulated sources using frequency-domain-multiplexed (FDM) PSDs. The important advantages of this optical configuration in comparison with laser/mirror combinations are that it has a large angular measurement range and allows the use of a probe that is small in comparison with the measurement volume. We review PSD characteristics and quantitative resolution limits, consider the lock-in amplifier measurement system as a communication link, discuss the application of FDM to PSDs, and make comparisons with time-domain techniques. We consider the phase-sensitive detector as a multirate DSP problem, explore parallels with Fourier spectral estimation and filter banks, discuss how to choose the modulation frequencies and sample rates that maximize channel isolation under design constraints, and describe efficient digital implementation. We also discuss hardware design considerations, sensor calibration, probe construction and calibration, and 3-D measurement by triangulation using two sensors. As an example, we characterize the resolution, speed, and accuracy of an instrument that measures the position and orientation of a 10 mm × 5 mm probe in 5 degrees of freedom (DOF) over a 30-mm cube with 4-μm peak-to-peak resolution at 1-kHz sampling.

  17. Line Terminal Circuit Module Design For Fiber Optic Digital Subscriber Loops

    NASA Astrophysics Data System (ADS)

    Tsuchiya, Toshiyuki; Suto, Koh-ichi; Yoneda, Etsugo

    1990-01-01

    Design philosophy of a fiber optic transmission line terminal circuit (LTC) module for digital subscriber loops is described. A small, cost effective LTC module has been developed that realizes a 52 to 156 Mb/s fiber-to-the-home system. The salient points are ; various combinations of LDs and PDs/APDs can be used to match the subscriber line length requirements, CMI or scrambled NRZ line codes can be used, the module is suitable for single mode fiber (SMF) or graded index fiber (GIF) cables, high density LSI techniques can be used to develop single chip components. The volume of the contructed module is 92.6cm3 with a dispersion power of 3W. A single low power IC chip has been developed that includes decision and timing circuits. Thus timing phase adjustments are not needed. Differential amplification created between the pre-amplifer IC and the main amplifier IC is employed to yield a high common mode rejection ratio and suppress the effects of external noise. The double loop of the auto-power-control (APC) for the LD is adopted to separately control the d.c. bias current (Is) and the pulse modulation current (Ip). The CMI-CODEC-IC is fabricated by a Bi-CMOS process. It includes a PLL circuit that doubles input clock frequency for CMI signal coding. The CMI line code can be adopted to maintain bit sequence independence, facilitate hardware implementation of the timing-extraction circuit, and prevent bit errors caused by received optical power fluctuations. Received optical power fluctuations can happen when fibers are manually handled during cable installation or mid-span branching.

  18. Observer Performance in the Use of Digital and Optical Microscopy for the Interpretation of Tissue-Based Biomarkers

    PubMed Central

    Gavrielides, Marios A.; Conway, Catherine; O'Flaherty, Neil; Gallas, Brandon D.; Hewitt, Stephen M.

    2014-01-01

    Background. We conducted a validation study of digital pathology for the quantitative assessment of tissue-based biomarkers with immunohistochemistry. Objective. To examine observer agreement as a function of viewing modality (digital versus optical microscopy), whole slide versus tissue microarray (TMA) review, biomarker type (HER2 incorporating membranous staining and Ki-67 with nuclear staining), and data type (continuous and categorical). Methods. Eight pathologists reviewed 50 breast cancer whole slides (25 stained with HER2 and 25 with Ki-67) and 2 TMAs (1 stained with HER2, 1 with Ki-67, each containing 97 cores), using digital and optical microscopy. Results. Results showed relatively high overall interobserver and intermodality agreement, with different patterns specific to biomarker type. For HER2, there was better interobserver agreement for optical compared to digital microscopy for whole slides as well as better interobserver and intermodality agreement for TMAs. For Ki-67, those patterns were not observed. Conclusions. The differences in agreement patterns when examining different biomarkers and different scoring methods and reviewing whole slides compared to TMA stress the need for validation studies focused on specific pathology tasks to eliminate sources of variability that might dilute findings. The statistical uncertainty observed in our analyses calls for adequate sampling for each individual task rather than pooling cases. PMID:25763314

  19. Digital recording and numerical reconstruction of holograms: an optical diagnostic for combustion.

    PubMed

    Xiao, Xudong; Puri, Ishwar K

    2002-07-01

    Holographic interferometry (HI) has proved to be a useful tool for nonintrusive temperature measurements in flames (and thereafter for inference of the local composition based on the state relationship approach) with high spatial and temporal resolution. Digital holographic interferometry (DHI) is a relatively new imaging and measurement technique that electronically records a hologram (e.g., on a CCD) and reconstructs it by a numerical method. Cumbersome chemical processing of the hologram is avoided in DHI, which thereby provides greater flexibility, speed, and the potential for real-time processing. In conventional holography, fringes that are neither bright nor dark on a hologram cannot be accurately resolved. The DHI technique has not yet to our knowledge been used for combustion applications. Herein we evaluate its efficacy for making temperature measurements in flames and assess its applicability through a simulation. Each part of a double exposure associated with the holographic technique is considered to be recorded by a hypothetical CCD sensor at a separate time from the other part. We applied the principles of Fourier optics to develop two numerical methods for hologram reconstruction, and we show that both methods provide an accurate reconstruction of the phase image associated with a flame. Because of the periodic nature of the wave function, the reconstructed phase values are limited to the interval [-pi/2, pi/2]. Thus an unwrapping algorithm is provided that produces a continuous phase distribution based on the condition that the reconstructed phase is jumped by a value of -pi or pi. We have also developed an iterative calculation method to adjust the value of the digital reference wave parameters that determines the phase imaging reconstruction in DHI.

  20. Optical analysis of nanomaterial-cell interactions: flow cytometry and digital holographic microscopy

    NASA Astrophysics Data System (ADS)

    Mues, Sarah; Antunovic, Jan; Ossig, Rainer; Kemper, Björn; Schnekenburger, Jürgen

    2015-05-01

    The in vitro cytotoxicity assessment of engineered nanoparticles commonly involves the measurement of different endpoints like the formation of reactive oxygen species, cell viability or cell death. Usually these parameters are determined by optical readouts of enzymatically converted substrates that often interfere with the tested nanomaterials. Using cell viability (WST-8) and cell death (LDH) as parameter we have initially investigated the toxic effects of spherical (NM 300) and rod shaped (NM 302) silver nanomaterials with a matrix of four cell lines representing different functions: lung and kidney epithelial cells, macrophages and fibroblasts. In addition, we have used a label-free flow cytometer configuration to investigate interactions of particles and macrophages by side scatter signal analysis. Finally, we explored digital holographic microscopy (DHM) for multimodal label-free analysis of nanomaterial toxicity. Quantitative DHM phase images were analyzed for cell thickness, volume, density, dry mass and refractive index. We could demonstrate that silver spheres lead to more cytotoxic effects than rods in all four examined cell lines and both assay. Exemplarily a dose dependent interaction increase of cells with NM 300 and NM 302 analyzed by flow cytometry is shown. Furthermore, we found that the refractive index of cells is influenced by incubation with NM 300 in a decreasing manner. A 24 hours time-lapse measurement revealed a dose dependent decrease of dry mass and surface area development indicating reduced cell viability and cell death. Our results demonstrate digital holographic microscopy and flow cytometry as valuable label-free tools for nanomaterial toxicity and cell interaction studies.

  1. The Ultraviolet, Optical, and Infrared Properties of Sloan Digital Sky Survey Sources Detected by GALEX

    NASA Astrophysics Data System (ADS)

    Agüeros, Marcel A.; Ivezić, Željko; Covey, Kevin R.; Obrić, Mirela; Hao, Lei; Walkowicz, Lucianne M.; West, Andrew A.; Vanden Berk, Daniel E.; Lupton, Robert H.; Knapp, Gillian R.; Gunn, James E.; Richards, Gordon T.; Bochanski, John, Jr.; Brooks, Alyson; Claire, Mark; Haggard, Daryl; Kaib, Nathan; Kimball, Amy; Gogarten, Stephanie M.; Seth, Anil; Solontoi, Michael

    2005-09-01

    We discuss the ultraviolet, optical, and infrared properties of the Sloan Digital Sky Survey (SDSS) sources detected by the Galaxy Evolution Explorer (GALEX) as part of its All-sky Imaging Survey Early Release Observations. Virtually all (>99%) the GALEX sources in the overlap region are detected by SDSS; those without an SDSS counterpart within our 6" search radius are mostly unflagged GALEX artifacts. GALEX sources represent ~2.5% of all SDSS sources within these fields, and about half are optically unresolved. Most unresolved GALEX-SDSS sources are bright (r<18 mag), blue, turnoff, thick-disk stars and are typically detected only in the GALEX near-ultraviolet (NUV) band. The remaining unresolved sources include low-redshift quasars (z<2.2), white dwarfs, and white dwarf-M dwarf pairs, and these dominate the optically unresolved sources detected in both GALEX bands. Almost all the resolved SDSS sources detected by GALEX are fainter than the SDSS main spectroscopic limit. (Conversely, of the SDSS galaxies in the main spectroscopic sample, about 40% are detected in at least one GALEX band.) These sources have colors consistent with those of blue (spiral) galaxies (u-r<2.2), and most are detected in both GALEX bands. Measurements of their UV colors allow much more accurate and robust estimates of star formation history than are possible using only SDSS data. Indeed, galaxies with the most recent (<~20 Myr) star formation can be robustly selected from the GALEX data by requiring that they be brighter in the far-ultraviolet (FUV) than in the NUV band. However, older starburst galaxies have UV colors similar to those of active galactic nuclei and thus cannot be selected unambiguously on the basis of GALEX fluxes alone. Additional information, such as spatially resolved FUV emission, optical morphology, or X-ray and radio data, is needed before blue GALEX colors can be unambiguously interpreted as a sign of recent star formation. With the aid of Two Micron All Sky

  2. Fixed-point vs. floating-point arithmetic comparison for adaptive optics real-time control computation

    NASA Astrophysics Data System (ADS)

    Martín-Hernando, Yolanda; Rodríguez-Ramos, Luis F.; Garcia-Talavera, Marcos R.

    2008-07-01

    Most computers in the past have been equipped with floating point processing capabilities, allowing an easy and brute-force solution for the machine computation errors, not requiring any specific tailoring of the computation in nearly hundred percent of situations. However, the computation needed for the adaptive optics real-time control in 30-50 meter telescopes is big enough to cause trouble to conventional von-Neumann processors, even if Moore's Law is valid for the next years. Field Programmable Gate Array (FPGAs) have been proposed as a viable alternative to cope with such computation needs[1,2], but--at least today's chips--will require fixed-point arithmetic to be used instead. It is then important to evaluate up to what point the accuracy and stability of the control system will be affected by this limitation. This paper presents the simulation and laboratory results of the comparison between both arithmetics, specifically evaluated in an adaptive optics system. The real-time controller has been modeled as black box having as input the wavefront sensor camera digital output data, providing a digital output to the actuators of the deformable mirror, and with the task of internally computing all outputs from the inputs. MATLAB fixed-point library has been used to evaluate the effect of different precision lengths (5-10 fractional bits) in the computation of the Shack-Hartmann subaperture centroid, in comparison with the reference 64-bit floating-point arithmetic and with the noise floor of the real system, concluding that the effect of the limited precision can be overcome by adequately selecting the number of fractional bits used in the representation, and tailoring that number with the needs at every step of the algorithm.

  3. Optically Selected BL Lacertae Candidates from the Sloan Digital Sky Survey Data Release Seven

    NASA Astrophysics Data System (ADS)

    Plotkin, Richard M.; Anderson, Scott F.; Brandt, W. N.; Diamond-Stanic, Aleksandar M.; Fan, Xiaohui; Hall, Patrick B.; Kimball, Amy E.; Richmond, Michael W.; Schneider, Donald P.; Shemmer, Ohad; Voges, Wolfgang; York, Donald G.; Bahcall, Neta A.; Snedden, Stephanie; Bizyaev, Dmitry; Brewington, Howard; Malanushenko, Viktor; Malanushenko, Elena; Oravetz, Dan; Pan, Kaike; Simmons, Audrey

    2010-02-01

    We present a sample of 723 optically selected BL Lac candidates from the Sloan Digital Sky Survey Data Release 7 (SDSS DR7) spectroscopic database encompassing 8250 deg2 of sky; our sample constitutes one of the largest uniform BL Lac samples yet derived. Each BL Lac candidate has a high-quality SDSS spectrum from which we determine spectroscopic redshifts for ~60% of the objects. Redshift lower limits are estimated for the remaining objects utilizing the lack of host galaxy flux contamination in their optical spectra; we find that objects lacking spectroscopic redshifts are likely at systematically higher redshifts. Approximately 80% of our BL Lac candidates match to a radio source in FIRST/NVSS, and ~40% match to a ROSAT X-ray source. The homogeneous multiwavelength coverage allows subdivision of the sample into 637 radio-loud BL Lac candidates and 86 weak-featured radio-quiet objects. The radio-loud objects broadly support the standard paradigm unifying BL Lac objects with beamed radio galaxies. We propose that the majority of the radio-quiet objects may be lower-redshift (z < 2.2) analogs to high-redshift weak line quasars (i.e., active galactic nucleus with unusually anemic broad emission line regions). These would constitute the largest sample of such objects, being of similar size and complementary in redshift to the samples of high-redshift weak line quasars previously discovered by the SDSS. However, some fraction of the weak-featured radio-quiet objects may instead populate a rare and extreme radio-weak tail of the much larger radio-loud BL Lac population. Serendipitous discoveries of unusual white dwarfs, high-redshift weak line quasars, and broad absorption line quasars with extreme continuum dropoffs blueward of rest-frame 2800 Å are also briefly described.

  4. Speckle reduction process based on digital filtering and wavelet compounding in optical coherence tomography for dermatology

    NASA Astrophysics Data System (ADS)

    Gómez Valverde, Juan J.; Ortuño, Juan E.; Guerra, Pedro; Hermann, Boris; Zabihian, Behrooz; Rubio-Guivernau, José L.; Santos, Andrés.; Drexler, Wolfgang; Ledesma-Carbayo, Maria J.

    2015-07-01

    Optical Coherence Tomography (OCT) has shown a great potential as a complementary imaging tool in the diagnosis of skin diseases. Speckle noise is the most prominent artifact present in OCT images and could limit the interpretation and detection capabilities. In this work we propose a new speckle reduction process and compare it with various denoising filters with high edge-preserving potential, using several sets of dermatological OCT B-scans. To validate the performance we used a custom-designed spectral domain OCT and two different data set groups. The first group consisted in five datasets of a single B-scan captured N times (with N<20), the second were five 3D volumes of 25 Bscans. As quality metrics we used signal to noise (SNR), contrast to noise (CNR) and equivalent number of looks (ENL) ratios. Our results show that a process based on a combination of a 2D enhanced sigma digital filter and a wavelet compounding method achieves the best results in terms of the improvement of the quality metrics. In the first group of individual B-scans we achieved improvements in SNR, CNR and ENL of 16.87 dB, 2.19 and 328 respectively; for the 3D volume datasets the improvements were 15.65 dB, 3.44 and 1148. Our results suggest that the proposed enhancement process may significantly reduce speckle, increasing SNR, CNR and ENL and reducing the number of extra acquisitions of the same frame.

  5. Resolution enhancement of digital laser scanning fluorescence microscopy with a dual-lens optical pickup head

    NASA Astrophysics Data System (ADS)

    Tsai, Rung-Ywan; Chen, Jung-Po; Lee, Yuan-Chin; Chiang, Hung-Chih; Huang, Tai-Ting; Huang, Chun-Chieh; Cheng, Chih-Ming; Cheng, Chung-Ta; Lo, Feng-Hsiang; Tiao, Golden

    2016-10-01

    The resolution of the cell fluorescence image captured by a digital laser scanning microscopy with a modified dual-lens BD-ROM optical pickup head is enhanced by image registration and double sample frequency. A dual objective lens of red (655 nm) and blue (405 or 488 nm) laser sources with numerical apertures of 0.6 and 0.85 is used for sample focusing and position tracking and cell fluorescence image capturing, respectively. The image registration and capturing frequency are based on the address-coded patterns of a sample slide. The address-coded patterns are designed as a string of binary code, which comprises a plurality of base-straight lands and grooves and data-straight grooves. The widths of the base-straight lands, base-straight grooves, and data-straight grooves are 0.38, 0.38, and 0.76 μm, respectively. The numbers of sample signals in the x-direction are measured at every intersection point by intersecting the base intensity of the push-pull signal of the address-coded patterns, which has a minimum spacing of 0.38 μm. After taking a double sample frequency, the resolution of the measured cell fluorescence image is enhanced from 0.38 μm to the diffraction limit of the objective lens.

  6. High-Speed Optical Library System Using Digital Versatile Disk Random Access Memory

    NASA Astrophysics Data System (ADS)

    Tanabe, Takaya; Ura, Tetsu; Yamamoto, Manabu

    2000-02-01

    A high-data-transfer-rate optical storage system using a redundant array of inexpensive libraries (RAIL) has been developed and tested. It incorporates multiple libraries, where each library consists of dual digital versatile disk (DVD) random access memory (RAM) drives and a single robotic hand and holds 2.6 GB DVD disks. To increase the reliability of data storage and at the same time to eliminate the need for read-after-write verification, which doubles the recording time, a redundant array of inexpensive drives (RAID) 4 algorithm is implemented in the control unit of the storage system. Data sent by the host is transferred to a control unit, which stripes the data into five data groups plus one parity unit. The striped and parity data is sent to individual libraries and written to the DVD disks. This system writes and retrieves data with a transfer rate of approximately 6 MB/s, using write and read control methods that minimize the data striping overhead. This reliable library system can be used for networked multimedia applications.

  7. Digital and optical shape representation and pattern recognition; Proceedings of the Meeting, Orlando, FL, Apr. 4-6, 1988

    NASA Technical Reports Server (NTRS)

    Juday, Richard D. (Editor)

    1988-01-01

    The present conference discusses topics in pattern-recognition correlator architectures, digital stereo systems, geometric image transformations and their applications, topics in pattern recognition, filter algorithms, object detection and classification, shape representation techniques, and model-based object recognition methods. Attention is given to edge-enhancement preprocessing using liquid crystal TVs, massively-parallel optical data base management, three-dimensional sensing with polar exponential sensor arrays, the optical processing of imaging spectrometer data, hybrid associative memories and metric data models, the representation of shape primitives in neural networks, and the Monte Carlo estimation of moment invariants for pattern recognition.

  8. Advanced optical correlation and digital methods for pattern matching—50th anniversary of Vander Lugt matched filter

    NASA Astrophysics Data System (ADS)

    Millán, María S.

    2012-10-01

    On the verge of the 50th anniversary of Vander Lugt’s formulation for pattern matching based on matched filtering and optical correlation, we acknowledge the very intense research activity developed in the field of correlation-based pattern recognition during this period of time. The paper reviews some domains that appeared as emerging fields in the last years of the 20th century and have been developed later on in the 21st century. Such is the case of three-dimensional (3D) object recognition, biometric pattern matching, optical security and hybrid optical-digital processors. 3D object recognition is a challenging case of multidimensional image recognition because of its implications in the recognition of real-world objects independent of their perspective. Biometric recognition is essentially pattern recognition for which the personal identification is based on the authentication of a specific physiological characteristic possessed by the subject (e.g. fingerprint, face, iris, retina, and multifactor combinations). Biometric recognition often appears combined with encryption-decryption processes to secure information. The optical implementations of correlation-based pattern recognition processes still rely on the 4f-correlator, the joint transform correlator, or some of their variants. But the many applications developed in the field have been pushing the systems for a continuous improvement of their architectures and algorithms, thus leading towards merged optical-digital solutions.

  9. Individual sarcomere length determination from isolated cardiac cells using high-resolution optical microscopy and digital image processing.

    PubMed Central

    Roos, K P; Brady, A J

    1982-01-01

    Discrete sarcomere lengths have been determined from dynamically contracting isolated cardiac cells with a high-speed, high-resolution direct optical imaging system. Calcium-tolerant cardiac cells from the rat are isolated by perfusion with collagenase and hyaluronidase. Individual sarcomere lengths can be determined by directly imaging the cell's striation pattern onto a solid-state charge-coupled device (CCD) detector interfaced with a digital computer. The precision of detection in a real light microscopic optical system is discussed in relation to the type of image detector, optical contract enhancement techniques, and digital image processing. The optical performance of the direct striation pattern image apparatus has been determined empirically with test grids under standard bright-field and Nomarski-differential interference contrast (DIC) conditions for application to real muscle imaging. Discrete striation positions of isolated cells have been detected and followed with high precision during phasic contraction-relaxation cycles down to average sarcomere lengths as short as 1.43 +/- 0.053 microns. The maximum rates of contraction and relaxation are rapid and synchronous in time course along the length of the cell. These results indicate that direct optical imaging can provide an accurate means to monitor discrete striations and sarcomere lengths along the length of Ca2+-tolerant heart cells. Images FIGURE 1 FIGURE 4 PMID:7183337

  10. Generation of optical OFDM signals using 21.4 GS/s real time digital signal processing.

    PubMed

    Benlachtar, Yannis; Watts, Philip M; Bouziane, Rachid; Milder, Peter; Rangaraj, Deepak; Cartolano, Anthony; Koutsoyannis, Robert; Hoe, James C; Püschel, Markus; Glick, Madeleine; Killey, Robert I

    2009-09-28

    We demonstrate a field programmable gate array (FPGA) based optical orthogonal frequency division multiplexing (OFDM) transmitter implementing real time digital signal processing at a sample rate of 21.4 GS/s. The QPSK-OFDM signal is generated using an 8 bit, 128 point inverse fast Fourier transform (IFFT) core, performing one transform per clock cycle at a clock speed of 167.2 MHz and can be deployed with either a direct-detection or a coherent receiver. The hardware design and the main digital signal processing functions are described, and we show that the main performance limitation is due to the low (4-bit) resolution of the digital-to-analog converter (DAC) and the 8-bit resolution of the IFFT core used. We analyze the back-to-back performance of the transmitter generating an 8.36 Gb/s optical single sideband (SSB) OFDM signal using digital up-conversion, suitable for direct-detection. Additionally, we use the device to transmit 8.36 Gb/s SSB OFDM signals over 200 km of uncompensated standard single mode fiber achieving an overall BER<10(-3).

  11. Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

    NASA Technical Reports Server (NTRS)

    Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

    1990-01-01

    The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

  12. Novel 2N bit bipolar photonic digital-to-analog converter based on optical DQPSK modulation coupled with differential detection.

    PubMed

    Liao, Jinxin; Wen, He; Zheng, Xiaoping; Zhang, Hanyi; Guo, Yili; Zhou, Bingkun

    2012-05-01

    A novel 2N bit bipolar photonic digital-to-analog converter (PDAC) scenario based on the optical differential quadrature phase shift keying (ODQPSK) modulation coupled with differential detection is proposed. Compared with other proposed schemes, this bipolar PDAC has a greater dynamic range and a larger noise margin with good scalabilities both in speed and resolution. We demonstrate a 4 bit PDAC in a proof-of-principle experiment at a sampling rate of 2.5 GS/s.

  13. Multi-ion detection by one-shot optical sensors using a colour digital photographic camera.

    PubMed

    Lapresta-Fernández, Alejandro; Capitán-Vallvey, Luis Fermín

    2011-10-07

    The feasibility and performance of a procedure to evaluate previously developed one-shot optical sensors as single and selective analyte sensors for potassium, magnesium and hardness are presented. The procedure uses a conventional colour digital photographic camera as the detection system for simultaneous multianalyte detection. A 6.0 megapixel camera was used, and the procedure describes how it is possible to quantify potassium, magnesium and hardness simultaneously from the images captured, using multianalyte one-shot sensors based on ionophore-chromoionophore chemistry, employing the colour information computed from a defined region of interest on the sensing membrane. One of the colour channels in the red, green, blue (RGB) colour space is used to build the analytical parameter, the effective degree of protonation (1-α(eff)), in good agreement with the theoretical model. The linearization of the sigmoidal response function increases the limit of detection (LOD) and analytical range in all cases studied. The increases were from 5.4 × 10(-6) to 2.7 × 10(-7) M for potassium, from 1.4 × 10(-4) to 2.0 × 10(-6) M for magnesium and from 1.7 to 2.0 × 10(-2) mg L(-1) of CaCO(3) for hardness. The method's precision was determined in terms of the relative standard deviation (RSD%) which was from 2.4 to 7.6 for potassium, from 6.8 to 7.8 for magnesium and from 4.3 to 7.8 for hardness. The procedure was applied to the simultaneous determination of potassium, magnesium and hardness using multianalyte one-shot sensors in different types of waters and beverages in order to cover the entire application range, statistically validating the results against atomic absorption spectrometry as the reference procedure. Accordingly, this paper is an attempt to demonstrate the possibility of using a conventional digital camera as an analytical device to measure this type of one-shot sensor based on ionophore-chromoionophore chemistry instead of using conventional lab

  14. Optical Science: Deploying Technical Concepts and Engaging Participation through Digital Storytelling

    NASA Astrophysics Data System (ADS)

    Thomas, R. G.; Berry, K.; Arrigo, J.; Hooper, R. P.

    2013-12-01

    Technical 'hands-on' training workshops are designed to bring together scientists, technicians, and program managers from universities, government agencies, and the private sector to discuss methods used and advances made in instrumentation and data analysis. Through classroom lectures and discussions combined with a field-day component, hands-on workshop participants get a 'full life cycle' perspective from instrumentation concepts and deployment to data analysis. Using film to document this process is becoming increasingly more popular, allowing scientists to add a story-telling component to their research. With the availability of high-quality and low priced professional video equipment and editing software, scientists are becoming digital storytellers. The science video developed from the 'hands-on' workshop, Optical Water Quality Sensors for Nutrients: Concepts, Deployment, and Analysis, encapsulates the objectives of technical training workshops for participants. Through the use of still photography, video, interviews, and sound, the short video, An Introduction to CUAHSI's Hands-on Workshops, produced by a co-instructor of the workshop acts as a multi-purpose tool. The 10-minute piece provides an overview of workshop field day activities and works to bridge the gap between classroom learning, instrumentation application and data analysis. CUAHSI 'hands-on' technical workshops have been collaboratively executed with faculty from several universities and with the U.S. Geological Survey. The video developed was designed to attract new participants to these professional development workshops, to stimulate a connection with the environment, to act as a workshop legacy resource, and also serve as a guide for prospective hands-on workshop organizers. The effective use of film and short videos in marketing scientific programs, such as technical trainings, allows scientists to visually demonstrate the technologies currently being employed and to provide a more

  15. All-digital signal-processing open-loop fiber-optic gyroscope with enlarged dynamic range.

    PubMed

    Wang, Qin; Yang, Chuanchuan; Wang, Xinyue; Wang, Ziyu

    2013-12-15

    We propose and realize a new open-loop fiber-optic gyroscope (FOG) with an all-digital signal-processing (DSP) system where an all-digital phase-locked loop is employed for digital demodulation to eliminate the variation of the source intensity and suppress the bias drift. A Sagnac phase-shift tracking method is proposed to enlarge the dynamic range, and, with its aid, a new open-loop FOG, which can achieve a large dynamic range and high sensitivity at the same time, is realized. The experimental results show that compared with the conventional open-loop FOG with the same fiber coil and optical devices, the proposed FOG reduces the bias instability from 0.259 to 0.018 deg/h, and the angle random walk from 0.031 to 0.006 deg/h(1/2), moreover, enlarges the dynamic range to ±360 deg/s, exceeding the maximum dynamic range ±63 deg/s of the conventional open-loop FOG.

  16. Optical timing receiver for the NASA laser ranging system. Part 2: High precision time interval digitizer

    NASA Technical Reports Server (NTRS)

    Leskovar, B.; Turko, B.

    1977-01-01

    The development of a high precision time interval digitizer is described. The time digitizer is a 10 psec resolution stop watch covering a range of up to 340 msec. The measured time interval is determined as a separation between leading edges of a pair of pulses applied externally to the start input and the stop input of the digitizer. Employing an interpolation techniques and a 50 MHz high precision master oscillator, the equivalent of a 100 GHz clock frequency standard is achieved. Absolute accuracy and stability of the digitizer are determined by the external 50 MHz master oscillator, which serves as a standard time marker. The start and stop pulses are fast 1 nsec rise time signals, according to the Nuclear Instrument means of tunnel diode discriminators. Firing level of the discriminator define start and stop points between which the time interval is digitized.

  17. External cavity based single mode Fabry-Pérot laser diode and its application towards all-optical digital circuits

    NASA Astrophysics Data System (ADS)

    Nakarmi, Bikash; Zhang, Xuping; Won, Yong Hyub

    2012-11-01

    We have proposed a novel approach of realizing all-optical logic gates and combinational circuit using external cavity based single mode Fabry-Pérot laser diodes (SMFP-LDs). Different techniques and critical parameters for injection locking the any one of the modes of SMFP-LDs are discussed. Taking consideration of wavelength detuning and input injected power, we have proposed and demonstrated multi-input injection locking, supporting beam injection locking with the conventional injection locking which are used for demonstrating different logic gates (NAND, AND, XNOR, XOR, NOT, NOR) and digital circuits (Half adder and Comparator). Since we have used SMFP-LDs, there is no requirement of additional probe beam and associated components as required by other optical technologies making the realization simple in configuration, cost effective and power efficient. Clear output waveforms, eye diagrams, risingfalling times and BER are presented to verify the proposed method. All-optical logic units and digital circuit are demonstrated at the data rate of 10 Gbps with the waveform of NRZ signal waveform and measured eye diagram and BER of the PRBS of 231-1 signal. The maximum power penalty among all demonstrated units is below 1.4 dB at the BER of 10-9.

  18. Implementation of a digital optical matrix-vector multiplier using a holographic look-up table and residue arithmetic

    NASA Technical Reports Server (NTRS)

    Habiby, Sarry F.

    1987-01-01

    The design and implementation of a digital (numerical) optical matrix-vector multiplier are presented. The objective is to demonstrate the operation of an optical processor designed to minimize computation time in performing a practical computing application. This is done by using the large array of processing elements in a Hughes liquid crystal light valve, and relying on the residue arithmetic representation, a holographic optical memory, and position coded optical look-up tables. In the design, all operations are performed in effectively one light valve response time regardless of matrix size. The features of the design allowing fast computation include the residue arithmetic representation, the mapping approach to computation, and the holographic memory. In addition, other features of the work include a practical light valve configuration for efficient polarization control, a model for recording multiple exposures in silver halides with equal reconstruction efficiency, and using light from an optical fiber for a reference beam source in constructing the hologram. The design can be extended to implement larger matrix arrays without increasing computation time.

  19. Single-shot three-dimensional shape measurement by low-coherent optical path difference digital holography.

    PubMed

    Tanaka, Yuji; Mori, Yutaka; Nomura, Takanori

    2014-09-20

    A single-shot three-dimensional (3D) shape measurement by low-coherent optical path difference digital holography with small energy consumption is proposed. The use of a superluminescent diode makes it possible. Weighting of the single hologram and numerical reconstruction give the 3D shape of an object. Experimental results using a simple object (the surface of a button cell battery) are given. By comparison with experimental results using a vertical scanning method, the proposed method is confirmed. The effects of a shift interval of the hologram and a zero-order component on a measurement result are also discussed.

  20. Fabrication of dual-wavelength diffractive beam splitters using maskless optical lithography with a digital micromirror device

    NASA Astrophysics Data System (ADS)

    Amako, Jun; Yu, Shinozaki

    2016-03-01

    In this paper, we demonstrate a dual-wavelength diffractive beam splitter to be used in parallel laser processing. The novel optical element, which is formed in a transparent material, generates two beam arrays at different wavelengths and allows their overlap at the process points on a workpiece. Since the splitter has a stochastically designed, complex, and deep surface profile, there is limited freedom in selecting a fabrication method. We designed the splitter using a simulated annealing algorithm and fabricated it in a photoresist through maskless exposure by using a digital micromirror device. We characterized the designed splitter, thereby corroborating the proposed beam-splitting concept.

  1. All-digital demodulation system of interferometric fiber optic sensors using an improved PGC algorithm based on fundamental frequency mixing

    NASA Astrophysics Data System (ADS)

    Zhang, Ai-ling; Wang, Kai-han; Zhang, Shuai; Wang, Yan

    2015-05-01

    We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying (arctan-DSM) algorithm. The total harmonic distortion (THD) and the light intensity disturbance (LID) are also suppressed, the same as those in the traditional arctan-DSM algorithm. Moreover, the lowest sampling frequency is also reduced by introducing anti-aliasing filter, so the occupation of the system memory is reduced. The simulations show that the improved algorithm can correctly demodulate cosine signal and chirp signal with lower sampling frequency.

  2. Differential-interference-contrast digital in-line holography microscopy based on a single-optical-element.

    PubMed

    Zhang, Yuchao; Xie, Changqing

    2015-11-01

    Both digital in-line holography (DIH) and zone plate-based microscopy have received considerable interest as powerful imaging tools. However, the former suffers from a twin-image noise problem. The latter suffers from low efficiency and difficulty in fabrication. Here, we present an effective and efficient phase-contrast imaging approach, named differential-interference-contrast digital in-line holography (DIC-DIH), by using a single optical element to split the incident light into a plane wave and a converging spherical wave and generate a two-dimensional (2D) DIC effect simultaneously. Specifically, to improve image contrast, we present a new single optical element, termed 2D DIC compound photon sieves, by combining two overlaid binary gratings and a compound photon sieve through two logical XOR operations. The proof-of-concept experiments demonstrate that the proposed technique can eliminate the twin-image noise problem and improve image contrast with high efficiency. Additionally, we present an example of the phase-contrast imaging nonuniform thick photoresist development process.

  3. High-Throughput Optical Interconnect Technology for Future On-Board Digital Processors

    DTIC Science & Technology

    2005-07-13

    30 Gbit/s. A flexible optical fibre circuit was developed so as to route the fibres from board to board, and connected to optical transmitter and...receiver modules through multi- fibre connectors. The demonstrator was integrated and the overall processor functionality was successfully demonstrated...equalizing circuits may be necessary in order to restore degraded signals. Fibre optics has become the technology of predilection for high-speed

  4. Fiber optic spectroscopic digital imaging sensor and method for flame properties monitoring

    SciTech Connect

    Zelepouga, Serguei A; Rue, David M; Saveliev, Alexei V

    2011-03-15

    A system for real-time monitoring of flame properties in combustors and gasifiers which includes an imaging fiber optic bundle having a light receiving end and a light output end and a spectroscopic imaging system operably connected with the light output end of the imaging fiber optic bundle. Focusing of the light received by the light receiving end of the imaging fiber optic bundle by a wall disposed between the light receiving end of the fiber optic bundle and a light source, which wall forms a pinhole opening aligned with the light receiving end.

  5. Implementation of digital optical capillaroscopy for quantifying and estimating the microvascular abnormalities in type 2 diabetes mellitus

    NASA Astrophysics Data System (ADS)

    Gurfinkel, Yu. I.; Suchkova, O. V.; Sasonko, M. L.; Priezzhev, A. V.

    2016-04-01

    This study is aimed to define the extent of digital capillaroscopy possibilities for the quantification and estimation of microvascular abnormalities in type 2 diabetes mellitus (T2DM). A total of 196 adult persons were enrolled in the study including the group of compensated T2DM (n = 52), decompensated diabetics (n = 68), and healthy volunteers (n = 76) with normal blood glucose and without signs of cardiovascular pathology. All participants of the study were examined with the digital optical capillaroscope ("AET", Russia). This instrument is equipped with an image-processing program allowing for quantifying the diameters of the arterial and venous segments of the capillaries and their ratio (coefficient of remodeling), perivascular zone size, capillary blood velocity, and the degree of arterial loops narrowing and the density of the capillary network. Also we estimated the relative amount of coil-shaped capillaries. The study revealed significant difference in the capillary density and the remodeling coefficient in comparison of T2DM patients with non-diabetic individuals. Significant changes are found in the decompensated T2DM group compared to the compensated group of diabetic patients. Furthermore, the number of coil-shaped capillaries differed greatly in T2DM patients as compared to the healthy subjects. The study did not reveal any statistically significant differences in the capillary density between the patients with compensated and decompensated T2DM. The digital optical capillaroscope equipped with the advanced image-processing algorithm opens up new possibilities for obtaining clinically important information on microvascular abnormalities in patients suffering from diabetes mellitus.

  6. Life Estimation Method for Optical Disk and Data Migration Method for Digitally Recorded Media

    NASA Astrophysics Data System (ADS)

    Watanabe, Atsumi

    Results of Study about lifetime estimation method for DVD disk are described. The study was performed by Digital Content Association of Japan (DCAj) under commission from The Mechanical Social Systems Foundation with subsidies from JKA's industry promotional funds raised from KEIRIN RACE. DVD disks for which quality control is well performed have lifetime of 50-100 years or more. Data migration method for digitally recorded media is also described. Here, error check is requested every 3 years. If the measured error rate is larger than determined value, immediate data migration to new media is requested.

  7. Computer Tomography and Hybrid Optical/Digital Methods for Aerodynamic Measurements.

    DTIC Science & Technology

    1987-12-28

    Industrial Applications of Corn- on Axisymnnietric Flame ’Iempnlw res Measured by Holo- puted Tornographv arid NMI? Imiaging (Optical Society of graphic...Pontificia Universidad Catolica de Chile. Escuela de Ingenieria . Santiago, equal. The optical path length difference (OPD) be- Chile. tween the two rays

  8. Synchronous triple-optical-path digital speckle pattern interferometry with fast discrete curvelet transform for measuring three-dimensional displacements

    NASA Astrophysics Data System (ADS)

    Gu, Guoqing; Wang, Kaifu; Wang, Yanfang; She, Bin

    2016-06-01

    Digital speckle pattern interferometry (DSPI) is a well-established and widely used optical measurement technique for obtaining qualitative as well as quantitative measurements of objects deformation. The simultaneous measurement of an object's surface displacements in three dimensions using DSPI is of great interest. This paper presents a triple-optical-path DSPI based method for the simultaneous and independent measurement of three-dimensional (3D) displacement fields. In the proposed method, in-plane speckle interferometers with dual-observation geometry and an out-of-plane interferometer are optimally combined to construct an integrated triple-optical-path DSPI system employing the phase shift technique, which uses only a single laser source and three cameras. These cameras are placed along a single line to synchronously capture real-time visible speckle fringe patterns in three dimensions. In addition, a pre-filtering method based on the fast discrete curvelet transform (FDCT) is utilized for denoising the obtained wrapped phase patterns to improve measurement accuracy. Finally, the simultaneous measurement of the 3D displacement fields of a simple beam and a composite laminated plate respectively subjected to three-point and single-point bend loading are investigated to validate the feasibility and effectiveness of the proposed method.

  9. Packet error rate analysis of digital pulse interval modulation in intersatellite optical communication systems with diversified wavefront deformation.

    PubMed

    Zhu, Jin; Wang, Dayan; Xie, Wanqing

    2015-02-20

    Diversified wavefront deformation is an inevitable phenomenon in intersatellite optical communication systems, which will decrease system performance. In this paper, we investigate the description of wavefront deformation and its influence on the packet error rate (PER) of digital pulse interval modulation (DPIM). With the wavelet method, the diversified wavefront deformation can be described by wavelet parameters: coefficient, dilation, and shift factors, where the coefficient factor represents the depth, dilation factor represents the area, and shift factor is for location. Based on this, the relationship between PER and wavelet parameters is analyzed from a theoretical viewpoint. Numerical results illustrate the validity of theoretical analysis: PER increases with the depth and area and decreases if location gets farther from the center of the optical antenna. In addition to describing diversified deformation, the advantage of the wavelet method over Zernike polynomials in computational complexity is shown via numerical example. This work provides a feasible method for the description along with influence analysis of diversified wavefront deformation from a practical viewpoint and will be helpful for designing optical systems.

  10. Geometrical features of transformed phase masks in the optical/digital device for identification of credit cards

    NASA Astrophysics Data System (ADS)

    Muravsky, Leonid I.; Kulynych, Yaroslav P.; Maksymenko, Olexander P.; Voronyak, Taras I.; Kostyukevych, Sergey A.

    2002-04-01

    The new method for identification of optical marks containing transformed phase masks (TPMs) is considered. A TPM placed in an optical correlator produces several sharp correlation peaks on its output. We choose the distances between peaks as basic geometrical features of a TPM. The increase of quantity of basic features leads to the increase of security level of documents and valuable papers. However, the amount of such features is limited and is depending from many factors. We picked the probability of false identification of the nearest feature as the criterion of separation of features on independent classes. The optical/digital device for identification of credit cards based on a joint transform correlator architecture was used for the study of TPMs. To estimate the law of distribution of basic features inherent to the same class, we carried out experiments with the series of TPMs. We have shown, that the additional features allow to increase the number of basic features, separated on different classes. These experiments also have allowed to estimate the error of features measurements

  11. Programmable broadband radio-frequency transversal filter with compact fiber-optics and digital microelectromechanical system-based optical spectral control.

    PubMed

    Riza, Nabeel A; Arain, Muzammil A

    2004-05-20

    To the best of our knowledge, for the first time a programmable broadband rf transversal filter is proposed that operates on the principle of broadband optical spectral control implemented with a spatial light modulator input rf signal time delay and weight selection over a near-continuous signal space. Specifically, the filter uses a chirped fiber Bragg grating in combination with a two-dimensional digital micromirror device to enable a programmable rf filter. As a first step, a two-tap rf notch filter is demonstrated with a tuning range of 0.563-6.032 GHz with a 25-dB notch depth at test notch frequencies of 845 and 905 MHz. The proposed filter can find applications in diverse fields such as radar, communications, medicine, and test and measurement.

  12. Simultaneous all-optical digital comparator and dual-directional half-subtractor for two-input 40 Gbit/s DPSK signals employing SOAs

    NASA Astrophysics Data System (ADS)

    Zhang, Yin; Lei, Lei; Dong, Jianji; Zhang, Xinliang

    2012-02-01

    A module of simultaneous implementation of all-optical digital comparator and dual-directional half-subtractor is proposed. Proof-of-concept experiment is performed at 40 Gbit/s employing the four-wave mixing and cross gain modulation in three parallel semiconductor optical amplifiers. All output results with over 10 dB extinction ratios, clear and wide open eye diagrams, are obtained without using assistant/holding light beam. All-optical half-adder can also be obtained by adjusting the phase shifter of delay interferometer in the proposed module because of its inherent reconfigurability and flexibility. The module would be a promising digital logic elementary circuit in all-optical networks and computing systems.

  13. Chip-scale hybrid optical sensing systems using digital signal processing.

    PubMed

    Cho, Sang-Yeon; Borah, Deva K

    2009-01-05

    We propose a novel hybrid optical sensing system for standalone, chip-scale sensing applications. The hybrid optical sensing system detects any spectral shift of the microresonator sensor output by estimating the effective refractive index using maximum likelihood estimation. The performance evaluation of the proposed hybrid sensing system in the Gaussian-noise dominant environment shows excellent estimation accuracy. This innovative approach allows fully functional integrated hybrid sensing systems, offering great potential in various chip-scale sensing applications.

  14. Folded digital backward propagation for dispersion-managed fiber-optic transmission.

    PubMed

    Zhu, Likai; Li, Guifang

    2011-03-28

    In periodically dispersion managed long-haul transmission systems, waveform distortion is dominated by chromatic dispersion. As a result of the periodic waveform evolution, the nonlinear behavior also repeats itself in every dispersion period. It is shown that, under the weakly nonlinear assumption, nonlinear effects accumulated in a large number (K) of spans can be approximated by nonlinear effects accumulated in a single span with the same dispersion map and K times the nonlinearity. Thus, significant savings in computational load can be achieved in digital compensation of fiber nonlinearity using folded digital backward propagation (DBP). Simulation results show that the required computation for DBP of dispersion managed transoceanic transmission systems can be reduced by up to 2 orders of magnitude with negligible penalty using folded DBP.

  15. An optical symmetric cryptographic system with simultaneous encryption and transmission of binary data and secret key by using dual phase-shifting digital holography

    NASA Astrophysics Data System (ADS)

    Gil, Sang Keun; Jeon, Seok Hee; Jung, Jong Rae

    2013-03-01

    We propose a new optical symmetric cryptographic system with simultaneous encryption and transmission of binary data and secret key by using dual phase-shifting digital holography. Dual phase-shifting digital holography contains two inner and outer interferometers which are used for encrypting data and a secret key at the same time. The technique using dual phase-shifting digital holographic interferometry is efficient because this scheme has an advantage of interference fringe data acquiring time. Binary information data is encrypted by the secret key by applying phase-shifting digital holographic method, and this secret key is also encrypted by phase-shifting digital holographic method and transmitted. Encrypted digital hologram in our method is Fourier transform hologram and is recorded on CCD with 256 gray-level quantized intensities. These encrypted digital holograms are able to be stored by computer and be transmitted over a communication network. With this encrypted digital hologram, the original binary data are decrypted by the same secret key. Simulation results show that the proposed method can be used for a cipher and security system.

  16. All-optical digital logic: Full addition or subtraction on a three-state system

    SciTech Connect

    Remacle, F.; Levine, R. D.

    2006-03-15

    Stimulated Raman adiabatic passage (STIRAP) is a well-studied pump-probe control scheme for manipulating the population of quantum states of atoms or molecules. By encoding the digits to be operated on as 'on' or 'off' laser input signals we show how STIRAP can be used to implement a finite-state logic machine. The physical conditions required for an effective STIRAP operation are related to the physical conditions expected for a logic machine. In particular, a condition is derived on the mean number of photons that represent an on pulse. A finite-state machine computes Boolean expressions that depend both on the input and on the present state of the machine. With two input signals we show how to implement a full adder where the carry-in digit is stored in the state of the machine. Furthermore, we show that it is possible to store the carry-out digit as the next state and thereby return the machine to a state ready for the next full addition. Such a machine operates as a cyclical full adder. We further show how this full adder can equally well be operated as a full subtractor. To the best of our knowledge this is the first example of a nanosized system that implements a full subtraction.

  17. High-temperature optically activated GaAs power switching for aircraft digital electronic control

    NASA Technical Reports Server (NTRS)

    Berak, J. M.; Grantham, D. H.; Swindal, J. L.; Black, J. F.; Allen, L. B.

    1983-01-01

    Gallium arsenide high-temperature devices were fabricated and assembled into an optically activated pulse-width-modulated power control for a torque motor typical of the kinds used in jet engine actuators. A bipolar heterojunction phototransistor with gallium aluminum arsenide emitter/window, a gallium arsenide junction field-effect power transistor and a gallium arsenide transient protection diode were designed and fabricated. A high-temperature fiber optic/phototransistor coupling scheme was implemented. The devices assembled into the demonstrator were successfully tested at 250 C, proving the feasibility of actuator-located switching of control power using optical signals transmitted by fibers. Assessments of the efficiency and technical merits were made for extension of this high-temperature technology to local conversion of optical power to electrical power and its control at levels useful for driving actuators. Optical power sources included in the comparisons were an infrared light-emitting diode, an injection laser diode, tungsten-halogen lamps and arc lamps. Optical-to-electrical power conversion was limited to photovoltaics located at the actuator. Impedance matching of the photovoltaic array to the load was considered over the full temperature range, -55 C to 260 C. Loss of photovoltaic efficiency at higher temperatures was taken into account. Serious losses in efficiency are: (1) in the optical source and the cooling which they may require in the assumed 125 C ambient, (2) in the decreased conversion efficiency of the gallium arsenide photovoltaic at 260 C, and (3) in impedance matching. Practical systems require improvements in these areas.

  18. An experimental distribution of analog and digital information in a hybrid wireless visible light communication system based on acousto-optic modulation and sinusoidal gratings

    NASA Astrophysics Data System (ADS)

    Gómez Colín, R.; García Juárez, A.; Zaldívar Huerta, I. E.; Marquina, A. Vera; García Delgado, L. A.; Leal Cruz, A. L.; Gómez Fuentes, R.

    2016-03-01

    In this paper we propose a photonic architecture as an alternative tool to distribute point to multipoint analog and digital information over a hybrid wireless visible optical communication system. The experimental set-up is composed of a red laser pointer, an acousto-optic modulator, a sinusoidal grating and a photo-detector array. By using a simple and variable interferometric system, diffraction gratings with different spatial frequencies are generated and recorded on a photoemulsion which is composed of vanilla with dichromate gelatin. Analog video and digital information are first transmitted and recovered over a wireless communication system using a microwave carrier at 4.52 GHz which is generated by distributed feedback lasers operating in the low laser threshold current region. Separately, the recovered video information and digital data are combined with a radio frequency signal of 80 MHz, obtaining a subcarrier of information that is imposed on the optical carrier of the pointer laser using an acousto-optic modulator which is operated with an angle of incident light that satisfies the Bragg condition. The modulated optical carrier is sent to a sinusoidal grating, the diffraction pattern is photo-detected using an array of PIN photo-detectors. The use of sinusoidal gratings with acousto-optic modulators allows that number of channels to be increased when both components are placed in cascade.

  19. Real-time monitoring of vibration fringe patterns by optical reconstruction of digital holograms: mode beating detection.

    PubMed

    Demoli, Nazif

    2006-03-20

    A new technique capable of monitoring two-dimensional vibration fringe patterns in real-time is presented. It is based on optical reconstructing of time-averaged digital holograms. Recording of the holograms is realized in a quasi-Fourier off-axis setup whilst reconstructing in an extended Fourier transform setup capable of spatial filtering of the hologram reconstructions. The effectiveness of the proposed device, tested on a silicon wafer, was verified by performing operations such as monitoring of vibration modes, adjusting the hologram recording parameters, or searching for resonant frequencies. Additionally, mode beating between two distant vibration frequencies is observed and reported. The proposed technique is suitable for various scientific and industrial applications.

  20. Near-infrared spectral tomography integrated with digital breast tomosynthesis: Effects of tissue scattering on optical data acquisition design

    SciTech Connect

    Michaelsen, Kelly; Krishnaswamy, Venkat; Pogue, Brian W.; Poplack, Steven P.; Paulsen, Keith D.

    2012-07-15

    Purpose: Design optimization and phantom validation of an integrated digital breast tomosynthesis (DBT) and near-infrared spectral tomography (NIRST) system targeting improvement in sensitivity and specificity of breast cancer detection is presented. Factors affecting instrumentation design include minimization of cost, complexity, and examination time while maintaining high fidelity NIRST measurements with sufficient information to recover accurate optical property maps. Methods: Reconstructed DBT slices from eight patients with abnormal mammograms provided anatomical information for the NIRST simulations. A limited frequency domain (FD) and extensive continuous wave (CW) NIRST system was modeled. The FD components provided tissue scattering estimations used in the reconstruction of the CW data. Scattering estimates were perturbed to study the effects on hemoglobin recovery. Breast mimicking agar phantoms with inclusions were imaged using the combined DBT/NIRST system for comparison with simulation results. Results: Patient simulations derived from DBT images show successful reconstruction of both normal and malignant lesions in the breast. They also demonstrate the importance of accurately quantifying tissue scattering. Specifically, 20% errors in optical scattering resulted in 22.6% or 35.1% error in quantification of total hemoglobin concentrations, depending on whether scattering was over- or underestimated, respectively. Limited frequency-domain optical signal sampling provided two regions scattering estimates (for fat and fibroglandular tissues) that led to hemoglobin concentrations that reduced the error in the tumor region by 31% relative to when a single estimate of optical scattering was used throughout the breast volume of interest. Acquiring frequency-domain data with six wavelengths instead of three did not significantly improve the hemoglobin concentration estimates. Simulation results were confirmed through experiments in two-region breast mimicking

  1. Uncertainty in the assessment of immunohistochemical staining with optical and digital microscopy: lessons from a reader study

    NASA Astrophysics Data System (ADS)

    Gavrielides, Marios A.; Gallas, Brandon D.; Hewitt, Stephen M.

    2015-03-01

    We recently completed a reader study to compare optical and digital pathology (DP) for the assessment of two tissue-based biomarkers with immunohistochemistry. Eight pathologists reviewed 50 breast cancer whole slides (25 stained with HER2 and 25 with Ki-67) and 2 TMAs (1 stained with HER2, 1 with Ki-67, 97 cores each), using digital and optical microscopy. All reviews took place in a single office, using the same microscope, same computer/color calibrated monitor combination, and the same ambient light, in order to eliminate sources of variability due to these parameters. Agreement analysis was performed using the Kendall's tau-b metric and percent correct agreement. Results showed relatively high overall inter-observer and inter-modality agreement. However, significant uncertainty was observed for the whole slide evaluation with 95% confidence intervals (CI) in the order of 0.30 for the Kendall's tau-b metric, despite taking care to reduce sources of uncertainty. For the better-sampled TMAs, CIs were in the order of 0.15. It can be deduced that the sample size of 25 slides for each biomarker was not adequate even though it is in line with recent guidelines for the validation of DP from the College of American Pathologists (20 slides for immunohistochemistry without specifying task). Significant uncertainty was observed in our study, despite controlling for several variables. Further work is needed to identify sources of uncertainty for observer tasks in DP, and to account for it in study designs to assess DP.

  2. Digitization of Full-Text Documents Before Publishing on the Internet: A Case Study Reviewing the Latest Optical Character Recognition Technologies.

    ERIC Educational Resources Information Center

    McClean, Clare M.

    1998-01-01

    Reviews strengths and weaknesses of five optical character recognition (OCR) software packages used to digitize paper documents before publishing on the Internet. Outlines options available and stages of the conversion process. Describes the learning experience of Eurotext, a United Kingdom-based electronic libraries project (eLib). (PEN)

  3. Experimental demonstration of a real-time high-throughput digital DC blocker for compensating ADC imperfections in optical fast-OFDM receivers.

    PubMed

    Zhang, Lu; Ouyang, Xing; Shao, Xiaopeng; Zhao, Jian

    2016-06-27

    Performance degradation induced by the DC components at the output of real-time analogue-to-digital converter (ADC) is experimentally investigated for optical fast-OFDM receiver. To compensate this degradation, register transfer level (RTL) circuits for real-time digital DC blocker with 20GS/s throughput are proposed and implemented in field programmable gate array (FPGA). The performance of the proposed real-time digital DC blocker is experimentally investigated in a 15Gb/s optical fast-OFDM system with intensity modulation and direct detection over 40 km standard single-mode fibre. The results show that the fixed-point DC blocker has negligible performance penalty compared to the offline floating point one, and can overcome the error floor of the fast OFDM receiver caused by the DC components from the real-time ADC output.

  4. Computer-Aided Design Package for Designers of Digital Optical Computers

    DTIC Science & Technology

    1993-07-01

    and even the circuit breadth is good in terms of complexity theory [4], but overall gate count is high, typically two to eight times greater than if... theory behind the method is described in Ref. [5]. In more detail, XOPID is a menu-driven tool that allows the user to draw and manipulate digital...into stage 3. In theory , any number of Boolean functions can be implemented in just two stages, given arbitrary fan-in and fan-out. In practice, fan

  5. Optical design for digital-micromirror device-based infrared scene projector

    NASA Astrophysics Data System (ADS)

    Jia, Xin; Xing, Tingwen

    2007-12-01

    This paper describes the principle of Digital Micromirror Device-based infrared scene projector system and analyzes the illumination system. We review traditional illumination systems in critical and kola ways. In order to get more uniform and a low cost illumination system, we use CODEV to design a fly-eye illumination system and a reflective fly-eye lens system. Simulation results by means of CODEV were shown. We propose that a fly-eye illumination system can achieve high quality infrared illumination system and a reflective fly-eye lens system can provide a low-loss illuminator.

  6. Optical Measurement of In-plane Waves in Mechanical Metamaterials Through Digital Image Correlation

    NASA Astrophysics Data System (ADS)

    Schaeffer, Marshall; Trainiti, Giuseppe; Ruzzene, Massimo

    2017-02-01

    We report on a Digital Image Correlation-based technique for the detection of in-plane elastic waves propagating in structural lattices. The experimental characterization of wave motion in lattice structures is currently of great interest due its relevance to the design of novel mechanical metamaterials with unique/unusual properties such as strongly directional behaviour, negative refractive indexes and topologically protected wave motion. Assessment of these functionalities often requires the detection of highly spatially resolved in-plane wavefields, which for reticulated or porous structural assemblies is an open challenge. A Digital Image Correlation approach is implemented that tracks small displacements of the lattice nodes by centring image subsets about the lattice intersections. A high speed camera records the motion of the points by properly interleaving subse- quent frames thus artificially enhancing the available sampling rate. This, along with an imaging stitching procedure, enables the capturing of a field of view that is sufficiently large for subsequent processing. The transient response is recorded in the form of the full wavefields, which are processed to unveil features of wave motion in a hexagonal lattice. Time snapshots and frequency contours in the spatial Fourier domain are compared with numerical predictions to illustrate the accuracy of the recorded wavefields.

  7. Optical Measurement of In-plane Waves in Mechanical Metamaterials Through Digital Image Correlation

    PubMed Central

    Schaeffer, Marshall; Trainiti, Giuseppe; Ruzzene, Massimo

    2017-01-01

    We report on a Digital Image Correlation-based technique for the detection of in-plane elastic waves propagating in structural lattices. The experimental characterization of wave motion in lattice structures is currently of great interest due its relevance to the design of novel mechanical metamaterials with unique/unusual properties such as strongly directional behaviour, negative refractive indexes and topologically protected wave motion. Assessment of these functionalities often requires the detection of highly spatially resolved in-plane wavefields, which for reticulated or porous structural assemblies is an open challenge. A Digital Image Correlation approach is implemented that tracks small displacements of the lattice nodes by centring image subsets about the lattice intersections. A high speed camera records the motion of the points by properly interleaving subse- quent frames thus artificially enhancing the available sampling rate. This, along with an imaging stitching procedure, enables the capturing of a field of view that is sufficiently large for subsequent processing. The transient response is recorded in the form of the full wavefields, which are processed to unveil features of wave motion in a hexagonal lattice. Time snapshots and frequency contours in the spatial Fourier domain are compared with numerical predictions to illustrate the accuracy of the recorded wavefields. PMID:28205589

  8. Optical Measurement of In-plane Waves in Mechanical Metamaterials Through Digital Image Correlation.

    PubMed

    Schaeffer, Marshall; Trainiti, Giuseppe; Ruzzene, Massimo

    2017-02-13

    We report on a Digital Image Correlation-based technique for the detection of in-plane elastic waves propagating in structural lattices. The experimental characterization of wave motion in lattice structures is currently of great interest due its relevance to the design of novel mechanical metamaterials with unique/unusual properties such as strongly directional behaviour, negative refractive indexes and topologically protected wave motion. Assessment of these functionalities often requires the detection of highly spatially resolved in-plane wavefields, which for reticulated or porous structural assemblies is an open challenge. A Digital Image Correlation approach is implemented that tracks small displacements of the lattice nodes by centring image subsets about the lattice intersections. A high speed camera records the motion of the points by properly interleaving subse- quent frames thus artificially enhancing the available sampling rate. This, along with an imaging stitching procedure, enables the capturing of a field of view that is sufficiently large for subsequent processing. The transient response is recorded in the form of the full wavefields, which are processed to unveil features of wave motion in a hexagonal lattice. Time snapshots and frequency contours in the spatial Fourier domain are compared with numerical predictions to illustrate the accuracy of the recorded wavefields.

  9. Parallel Matlab: RTExpress on 64-bit SGI Altix with SCSL and MPT

    DTIC Science & Technology

    2007-11-02

    MATLAB® Scripts RTExpress Resource Mapper Translator Compiler/ Linker Execute on Host Target Platform splitm editm Automatically Generate Embedded Code...plotting and image viewing • Greater life cycle coverage due to MATLAB® integration • Legacy software integration • Automatic parallel C code generation

  10. Skin surface and sub-surface strain and deformation imaging using optical coherence tomography and digital image correlation

    NASA Astrophysics Data System (ADS)

    Hu, X.; Maiti, R.; Liu, X.; Gerhardt, L. C.; Lee, Z. S.; Byers, R.; Franklin, S. E.; Lewis, R.; Matcher, S. J.; Carré, M. J.

    2016-03-01

    Bio-mechanical properties of the human skin deformed by external forces at difference skin/material interfaces attract much attention in medical research. For instance, such properties are important design factors when one designs a healthcare device, i.e., the device might be applied directly at skin/device interfaces. In this paper, we investigated the bio-mechanical properties, i.e., surface strain, morphological changes of the skin layers, etc., of the human finger-pad and forearm skin as a function of applied pressure by utilizing two non-invasive techniques, i.e., optical coherence tomography (OCT) and digital image correlation (DIC). Skin deformation results of the human finger-pad and forearm skin were obtained while pressed against a transparent optical glass plate under the action of 0.5-24 N force and stretching naturally from 90° flexion to 180° full extension respectively. The obtained OCT images showed the deformation results beneath the skin surface, however, DIC images gave overall information of strain at the surface.

  11. Closed-loop phase stabilizing and phase stepping methods for fiber-optic projected-fringe digital interferometry.

    PubMed

    Chao, Zhang; Fa-Jie, Duan

    2011-11-01

    Closed-loop active homodyne control can be used to make an interferometer steady against phase fluctuating followed by, for example, temperature gradients. This technology is introduced to stabilize π/2 -rad phase steps in a full-field interferometer. Two beams emitted from a fiber-optic coupler are combined to form an interference fringe pattern on a diffusely reflecting object. Fresnel reflections from the distal fiber ends undergo a double pass in the fibers and interference at the fourth port of the coupler which formed a Michelson interferometer. We suggested two means of ac phase tracking (PTAC) and dc phase tracking (PTDC) to maintain the interference intensity at quadrature by feedback control. Stepping between quadrature positions forces a π/2 -rad phase step. A method based on the ratio of harmonic of the interference signal was proposed to estimate phase step accuracy. A root-mean-square phase stability of 1.5 mrad and phase step accuracy of 2.6 mrad were measured with PTAC and a root-mean-square phase stability of 2 mrad and phase step accuracy of 13.8 mrad were measured with PTDC for the fiber-optic projected-fringe digital interferometry following the same condition. It worked well in two hours without resetting the integrator.

  12. Experimental transmission of quantum digital signatures over 90 km of installed optical fiber using a differential phase shift quantum key distribution system

    NASA Astrophysics Data System (ADS)

    Collins, Robert J.; Amiri, Ryan; Fujiwara, Mikio; Honjo, Toshimori; Shimizu, Kaoru; Tamaki, Kiyoshi; Takeoka, Masahiro; Andersson, Erika; Buller, Gerald S.; Sasaki, Masahide

    2016-11-01

    Quantum digital signatures apply quantum mechanics to the problem of guaranteeing message integrity and non-repudiation with information-theoretical security, which are complementary to the confidentiality realized by quantum key distribution. Previous experimental demonstrations have been limited to transmission distances of less than 5-km of optical fiber in a laboratory setting. Here we report the first demonstration of quantum digital signatures over installed optical fiber as well as the longest transmission link reported to date. This demonstration used a 90-km long differential phase shift quantum key distribution system to achieve approximately one signed bit per second - an increase in the signature generation rate of several orders of magnitude over previous optical fiber demonstrations.

  13. Digital in-line holography for the characterization of flowing particles in astigmatic optical systems

    NASA Astrophysics Data System (ADS)

    Sentis, Matthias P. L.; Bruel, Laurent; Charton, Sophie; Onofri, Fabrice R. A.; Lamadie, Fabrice

    2017-01-01

    An extended Generalized Fresnel Transform (GFT) is proposed to account for the astigmatism introduced by optical elements described, in the paraxial approximation, with a ray transfer matrix analysis. Generalized impulse response and generalized Fresnel transfer function propagators as well as sampling conditions are derived to properly implement this transformation. As a test case, the near-field diffraction patterns and in-line holograms produced by droplets flowing in a tube with cylindrical interfaces have been simulated. A best fitting approach is introduced to retrieve, from the propagated holograms, the 3D position and size of the droplets. Several hologram focusing indicators based on the analysis of droplets focus region are also proposed to further improve the estimation of the droplets position along the optical axis. Numerical simulations and experimental results confirm the applicability and accuracy of the proposed methods.

  14. Programmable Optoelectronic Multiprocessors And Their Comparison With Symbolic Substitution For Digital Optical Computing

    NASA Astrophysics Data System (ADS)

    Kiamilev, F.; Esener, Sadik C.; Paturi, R.; Fainmar, Y.; Mercier, P.; Guest, C. C.; Lee, Sing H.

    1989-04-01

    This paper introduces programmable arrays of optically inter-connected electronic processors and compares them with conventional symbolic substitution (SS) systems. The comparison is made on the basis of computational efficiency, speed, size, energy utilization, programmability, and fault tolerance. The small grain size and space-invariant connections of SS lead to poor computational efficiency, difficult programming, and difficult incorporation of fault tolerance. Reliance on optical gates as its fundamental building elements is shown to give poor energy utilization. Programmable optoelectronic multiprocessor (POEM) systems, on the other hand, provide the architectural flexibility for good computational efficiency, use an energy-efficient combination of technologies, and support traditional programming methodologies and fault tolerance. Although the inherent clock speed of POEM systems is slower than that of SS systems, for most problems they will provide greater computational throughput. This comparison does not take into account the recent addition of crossover interconnect and space-variant masks to the SS architecture.

  15. Phase Coherent Digital Communications for Wireless Optical Links in Turbid Underwater Environments

    DTIC Science & Technology

    2007-01-01

    keying (PSK) and quadrature amplitude modulation (QAM). Implementation of these schemes is unique, since most work in underwater optical...environment will affect the utility of these coherent schemes. Therefore, the focus of this work is to investigate the effects that scattering will...5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Air Systems Command,22347 Cedar Point Rd,Patuxent River,MD,20634 8

  16. Optical enhancement of fingerprint deposits on brass using digital color mapping.

    PubMed

    Bond, John W

    2011-09-01

    The reflection of visible light from α-phase brass subject to surface oxidation in air at elevated temperatures is investigated. X-ray photoelectron and auger electron spectroscopy confirm that covered areas of brass (not exposed to air) display dezincification but an absence of significant surface oxidation, confirming a differential oxidation mechanism. Visualization of differential oxidation is shown to be enhanced by selective digital mapping of colors reflected from the surface of the brass using Adobe(®) Photoshop(®). Enhancement is optimal when the brass is heated to ∼ 250°C with areas of oxidation having a mirror-like appearance. The use of this enhancement method to produce a faithful image of fingerprint ridge characteristics is demonstrated on brass shell casings where fingerprints were deposited prefiring.

  17. Digital metamaterials.

    PubMed

    Della Giovampaola, Cristian; Engheta, Nader

    2014-12-01

    Balancing complexity and simplicity has played an important role in the development of many fields in science and engineering. One of the well-known and powerful examples of such balance can be found in Boolean algebra and its impact on the birth of digital electronics and the digital information age. The simplicity of using only two numbers, '0' and '1', in a binary system for describing an arbitrary quantity made the fields of digital electronics and digital signal processing powerful and ubiquitous. Here, inspired by the binary concept, we propose to develop the notion of digital metamaterials. Specifically, we investigate how one can synthesize an electromagnetic metamaterial with a desired permittivity, using as building blocks only two elemental materials, which we call 'metamaterial bits', with two distinct permittivity functions. We demonstrate, analytically and numerically, how proper spatial mixtures of such metamaterial bits lead to elemental 'metamaterial bytes' with effective material parameters that are different from the parameters of the metamaterial bits. We then apply this methodology to several design examples of optical elements, such as digital convex lenses, flat graded-index digital lenses, digital constructs for epsilon-near-zero (ENZ) supercoupling and digital hyperlenses, thus highlighting the power and simplicity of the methodology.

  18. Ultra-fast analog-to-digital converter based on a nonlinear triplexer and an optical coder with a photonic crystal structure.

    PubMed

    Mehdizadeh, Farhad; Soroosh, Mohammad; Alipour-Banaei, Hamed; Farshidi, Ebrahim

    2017-03-01

    In this paper, we propose what we believe is a novel all-optical analog-to-digital converter (ADC) based on photonic crystals. The proposed structure is composed of a nonlinear triplexer and an optical coder. The nonlinear triplexer is for creating discrete levels in the continuous optical input signal, and the optical coder is for generating a 2-bit standard binary code out of the discrete levels coming from the nonlinear triplexer. Controlling the resonant mode of the resonant rings through optical intensity is the main objective and working mechanism of the proposed structure. The maximum delay time obtained for the proposed structure was about 5 ps and the total footprint is about 1520  μm2.

  19. Digital Logic and Reconfigurable Interconnects Using Aluminum Gallium Arsenide Electro-Optic Fredkin Gates

    DTIC Science & Technology

    1994-06-01

    Cabrera, C. Tejedor and F . Meseguer, OLinear Electro-Optic Effects in Zinc Blende Semiconductors,’ Journal of Agglied Physics Vol. 56, 4666, (1985...IL JAMES G. GROTE E-O Techniques & Applications Branch Solid State Electronics Directorate F Air Force Materiel Command June 1994 Interim Report For...dWta nede. and comWei and= tvew ==g te €ollon f inmation. Send comments regarding this b=n emae or ay oer aspect of thi$ uec~a@4 ntnta4i. iclding

  20. Fast and Accurate Cell Tracking by a Novel Optical-Digital Hybrid Method

    NASA Astrophysics Data System (ADS)

    Torres-Cisneros, M.; Aviña-Cervantes, J. G.; Pérez-Careta, E.; Ambriz-Colín, F.; Tinoco, Verónica; Ibarra-Manzano, O. G.; Plascencia-Mora, H.; Aguilera-Gómez, E.; Ibarra-Manzano, M. A.; Guzman-Cabrera, R.; Debeir, Olivier; Sánchez-Mondragón, J. J.

    2013-09-01

    An innovative methodology to detect and track cells using microscope images enhanced by optical cross-correlation techniques is proposed in this paper. In order to increase the tracking sensibility, image pre-processing has been implemented as a morphological operator on the microscope image. Results show that the pre-processing process allows for additional frames of cell tracking, therefore increasing its robustness. The proposed methodology can be used in analyzing different problems such as mitosis, cell collisions, and cell overlapping, ultimately designed to identify and treat illnesses and malignancies.

  1. Parallel optical control of spatiotemporal neuronal spike activity using high-speed digital light processing.

    PubMed

    Jerome, Jason; Foehring, Robert C; Armstrong, William E; Spain, William J; Heck, Detlef H

    2011-01-01

    Neurons in the mammalian neocortex receive inputs from and communicate back to thousands of other neurons, creating complex spatiotemporal activity patterns. The experimental investigation of these parallel dynamic interactions has been limited due to the technical challenges of monitoring or manipulating neuronal activity at that level of complexity. Here we describe a new massively parallel photostimulation system that can be used to control action potential firing in in vitro brain slices with high spatial and temporal resolution while performing extracellular or intracellular electrophysiological measurements. The system uses digital light processing technology to generate 2-dimensional (2D) stimulus patterns with >780,000 independently controlled photostimulation sites that operate at high spatial (5.4 μm) and temporal (>13 kHz) resolution. Light is projected through the quartz-glass bottom of the perfusion chamber providing access to a large area (2.76 mm × 2.07 mm) of the slice preparation. This system has the unique capability to induce temporally precise action potential firing in large groups of neurons distributed over a wide area covering several cortical columns. Parallel photostimulation opens up new opportunities for the in vitro experimental investigation of spatiotemporal neuronal interactions at a broad range of anatomical scales.

  2. Parallel Optical Control of Spatiotemporal Neuronal Spike Activity Using High-Speed Digital Light Processing

    PubMed Central

    Jerome, Jason; Foehring, Robert C.; Armstrong, William E.; Spain, William J.; Heck, Detlef H.

    2011-01-01

    Neurons in the mammalian neocortex receive inputs from and communicate back to thousands of other neurons, creating complex spatiotemporal activity patterns. The experimental investigation of these parallel dynamic interactions has been limited due to the technical challenges of monitoring or manipulating neuronal activity at that level of complexity. Here we describe a new massively parallel photostimulation system that can be used to control action potential firing in in vitro brain slices with high spatial and temporal resolution while performing extracellular or intracellular electrophysiological measurements. The system uses digital light processing technology to generate 2-dimensional (2D) stimulus patterns with >780,000 independently controlled photostimulation sites that operate at high spatial (5.4 μm) and temporal (>13 kHz) resolution. Light is projected through the quartz–glass bottom of the perfusion chamber providing access to a large area (2.76 mm × 2.07 mm) of the slice preparation. This system has the unique capability to induce temporally precise action potential firing in large groups of neurons distributed over a wide area covering several cortical columns. Parallel photostimulation opens up new opportunities for the in vitro experimental investigation of spatiotemporal neuronal interactions at a broad range of anatomical scales. PMID:21904526

  3. Extracting Short Rise-Time Velocity Profiles with Digital Down-Shift Analysis of Optically Up-Converted PDV Data

    SciTech Connect

    Abel Diaz, Nathan Riley, Cenobio Gallegos, Matthew Teel, Michael Berninger, Thomas W. Tunnell

    2010-09-08

    This work describes the digital down-shift (DDS) technique, a new method of extracting short rise-time velocity profiles in the analysis of optically up-converted PDV data. The DDS technique manipulates the PDV data by subtracting a constant velocity (i.e., the DDS velocity νDDS) from the velocity profile. DDS exploits the simple fact that the optically up-converted data ride on top of a base velocity (ν0, the apparent velocity at no motion) with a rapid rise to a high velocity (νf) of a few km/s or more. Consequently, the frequency content of the signal must describe a velocity profile that increases from ν0 to ν0 + νf. The DDS technique produces velocity reversals in the processed data before shock breakout when ν0 < νDDS < ν0 + νf. The DDS analysis process strategically selects specific DDS velocities (velocity at which the user down shifts the data) that produce anomalous reversals (maxima and/or minima), which are predictable and easy to identify in the mid-range of the data. Additional analysis determines when these maxima and minima occur. By successive application of the DDS technique and iterative analysis, velocity profiles are extracted as time as a function of velocity rather than as a function of time as it would be in a conventional velocity profile. Presented results include a description of DDS, velocity profiles extracted from laser-driven shock data with rise times of 200 ps or less, and a comparison with other techniques.

  4. Experimental demonstration of low-complexity fiber chromatic dispersion mitigation for reduced guard-interval OFDM coherent optical communication systems based on digital spectrum sub-band multiplexing.

    PubMed

    Malekiha, Mahdi; Tselniker, Igor; Nazarathy, Moshe; Tolmachev, Alex; Plant, David V

    2015-10-05

    We experimentally demonstrate a novel digital signal processing (DSP) structure for reduced guard-interval (RGI) OFDM coherent optical systems. The proposed concept is based on digitally slicing optical channel bandwidth into multiple spectrally disjoint sub-bands which are then processed in parallel. Each low bandwidth sub-band has a smaller delay-spread compared to a full-band signal. This enables compensation of both chromatic dispersion (CD) and polarization mode dispersion using a simple timing and one-tap-per-symbol frequency domain equalizer with a small cyclic prefix overhead. In terms of the DSP architecture, this allows for a highly efficient parallelization of DSP tasks performed over the received signal samples by deploying multiple processors running at a lower clock rate. It should be noted that this parallelization is performed in the frequency domain and it allows for flexible optical transceiver schemes. In addition, the resulting optical receiver is simplified due to the removal of the CD compensation equalizer compared to conventional RGI-OFDM systems. In this paper we experimentally demonstrate digital sub-banding of optical bandwidth. We test the system performance for different modulation formats (QPSK, 16QAM and 32QAM) over various transmission distances and optical launch powers using a 1.5% CP overhead in all scenarios. We also compare the proposed RGI-OFDM architecture performance against common single carrier modulation formats. At the same total data rate and signal bandwidth both systems have similar performance and transmission reach whereas the proposed method allows for a significant reduction of computational complexity due to removal of CD pre/post compensation equalizer.

  5. Focusing light through biological tissue and tissue-mimicking phantoms up to 9.6 cm in thickness with digital optical phase conjugation

    NASA Astrophysics Data System (ADS)

    Shen, Yuecheng; Liu, Yan; Ma, Cheng; Wang, Lihong V.

    2016-08-01

    Optical phase conjugation (OPC)-based wavefront shaping techniques focus light through or within scattering media, which is critically important for deep-tissue optical imaging, manipulation, and therapy. However, to date, the sample thickness in OPC experiments has been limited to only a few millimeters. Here, by using a laser with a long coherence length and an optimized digital OPC system that can safely deliver more light power, we focused 532-nm light through tissue-mimicking phantoms up to 9.6 cm thick, as well as through ex vivo chicken breast tissue up to 2.5 cm thick. Our results demonstrate that OPC can be achieved even when photons have experienced on average 1000 scattering events. The demonstrated penetration of nearly 10 cm (˜100 transport mean free paths) has never been achieved before by any optical focusing technique, and it shows the promise of OPC for deep-tissue noninvasive optical imaging, manipulation, and therapy.

  6. Optical diffraction tomography using a digital micromirror device for stable measurements of 4D refractive index tomography of cells

    NASA Astrophysics Data System (ADS)

    Shin, Seungwoo; Kim, Kyoohyun; Kim, Taeho; Yoon, Jonghee; Hong, Kihyun; Park, Jinah; Park, YongKeun

    2016-03-01

    Optical diffraction tomography (ODT) is an interferometric microscopy technique capable of measuring 3-D refractive index (RI) distribution of transparent samples. Multiple 2-D holograms of a sample illuminated with various angles are measured, from which 3-D RI map of the sample is reconstructed via the diffraction theory. ODT has been proved as a powerful tool for the study of biological cells, due to its non-invasiveness, label-free and quantitative imaging capability. Recently, our group has demonstrated that a digital micromirror device (DMD) can be exploited for fast and precise control of illumination beams for ODT. In this work, we systematically study the precision and stability of the ODT system equipped with a DMD and present measurements of 3-D and 4-D RI maps of various types of live cells including human red blood cells, white blood cells, hepatocytes, and HeLa cells. Furthermore, we also demonstrate the effective visualization of 3-D RI maps of live cells utilizing the measured information about the values and gradient of RI tomograms.

  7. Subaru Telescope adaptive optics observations of gravitationally lensed quasars in the Sloan Digital Sky Survey

    NASA Astrophysics Data System (ADS)

    Rusu, Cristian E.; Oguri, Masamune; Minowa, Yosuke; Iye, Masanori; Inada, Naohisa; Oya, Shin; Kayo, Issha; Hayano, Yutaka; Hattori, Masayuki; Saito, Yoshihiko; Ito, Meguru; Pyo, Tae-Soo; Terada, Hiroshi; Takami, Hideki; Watanabe, Makoto

    2016-05-01

    We present the results of an imaging observation campaign conducted with the Subaru Telescope adaptive optics system (IRCS+AO188) on 28 gravitationally lensed quasars and candidates (23 doubles, 1 quad, 1 possible triple, and 3 candidates) from the SDSS Quasar Lens Search. We develop a novel modelling technique that fits analytical and hybrid point spread functions (PSFs), while simultaneously measuring the relative astrometry, photometry, as well as the lens galaxy morphology. We account for systematics by simulating the observed systems using separately observed PSF stars. The measured relative astrometry is comparable with that typically achieved with the Hubble Space Telescope, even after marginalizing over the PSF uncertainty. We model for the first time the quasar host galaxies in five systems, without a priori knowledge of the PSF, and show that their luminosities follow the known correlation with the mass of the supermassive black hole. For each system, we obtain mass models far more accurate than those previously published from low-resolution data, and we show that in our sample of lensing galaxies the observed light profile is more elliptical than the mass, for ellipticity ≳0.25. We also identify eight doubles for which the sources of external and internal shear are more reliably separated, and should therefore be prioritized in monitoring campaigns aimed at measuring time delays in order to infer the Hubble constant.

  8. Digital stereo-optic disc image analyzer for monitoring progression of glaucoma

    NASA Astrophysics Data System (ADS)

    Corona, Enrique; Mitra, Sunanda; Wilson, Mark P.; Soliz, Peter

    2002-05-01

    This paper describes an automated 3-D surface recovery algorithm for consistent and quantitative evaluation of the deformation in the ONH (optic nerve head). Additional measures, such as the changes in the volume of the cup and the disc as an improvement to the traditional cup to disc ratios, can thus be developed for longitudinal follow-up study of a patient. We propose an automated computerized technique for stereo pair registration and surface visualization of the ONH. Power cepstrum and zero mean cross correlation are embedded in the registration and a 3-D surface recovery technique is proposed. Preprocessing, as well as an overall registration, is performed upon stereo pairs. Then a coarse to fine feature matching strategy is used to reduce the ambiguity in finding the conjugate pair of the same point within the constraints of the epipolar plane. A cubic B-spline interpolation smooths the representation of the ONH obtained, while superimposition of features such as blood vessels is added. Studies show high correlation between traditional cup/disc measures derived from manual segmentation by ophthalmologists and computer generated cup/disc volume ratio. Such longitudinal studies over a large population of glaucoma patients are currently in progress for validation of the surface recovery algorithm.

  9. Recent advances in joint optical-digital design for optronics applications

    NASA Astrophysics Data System (ADS)

    Burcklen, Marie-Anne; Diaz, Frédéric; Leprêtre, François; Lee, Mane-Si Laure; Delboulbé, Anne; Loiseaux, Brigitte; Millet, Philippe; Duhem, François; Lemonnier, Fabrice; Sauer, Hervé; Goudail, François

    2016-05-01

    Increasing the capture volume of visible cameras while maintaining high image resolutions, low power consumption and standard video-frame rate operation is of utmost importance for hand-free night vision goggles or embedded surveillance systems. Since such imaging systems require to operate at high aperture, their optical design has become more complex and critical. Therefore new design alternatives have to be considered. Among them, wavefront coding changes and desensitizes the modulation transfer function (MTF) of the lens by inserting a phase mask in the vicinity of the aperture stop. This smart filter is combined with an efficient image processing that ensures optimal image quality over a larger depth of field. In this paper recent advances are discussed concerning design and integration of a compact imaging system based on wavefront coding. We address the design, the integration and the characterization of a High Definition (HD) camera of large aperture (F/1.2) operating in the visible and near infrared spectral ranges, endowed with wavefront coding. Two types of phase masks (pyramidal and polynomial) have been jointly optimized with their deconvolution algorithm in order to meet the best performance along an increased range of focus distances and manufactured. Real time deconvolution processing is implemented on a Field Programmable Gate Array. It is shown that despite the high data throughput of an HD imaging chain, the level of power consumption is far below the initial specifications. We have characterized the performances with and without wavefront coding through MTF measurements and image quality assessments. A depth-of- field increase up to x2.5 has been demonstrated in accordance with the theoretical predictions.

  10. Automating quality assurance of digital linear accelerators using a radioluminescent phosphor coated phantom and optical imaging

    NASA Astrophysics Data System (ADS)

    Jenkins, Cesare H.; Naczynski, Dominik J.; Yu, Shu-Jung S.; Yang, Yong; Xing, Lei

    2016-09-01

    Performing mechanical and geometric quality assurance (QA) tests for medical linear accelerators (LINAC) is a predominantly manual process that consumes significant time and resources. In order to alleviate this burden this study proposes a novel strategy to automate the process of performing these tests. The autonomous QA system consists of three parts: (1) a customized phantom coated with radioluminescent material; (2) an optical imaging system capable of visualizing the incidence of the radiation beam, light field or lasers on the phantom; and (3) software to process the captured signals. The radioluminescent phantom, which enables visualization of the radiation beam on the same surface as the light field and lasers, is placed on the couch and imaged while a predefined treatment plan is delivered from the LINAC. The captured images are then processed to self-calibrate the system and perform measurements for evaluating light field/radiation coincidence, jaw position indicators, cross-hair centering, treatment couch position indicators and localizing laser alignment. System accuracy is probed by intentionally introducing errors and by comparing with current clinical methods. The accuracy of self-calibration is evaluated by examining measurement repeatability under fixed and variable phantom setups. The integrated system was able to automatically collect, analyze and report the results for the mechanical alignment tests specified by TG-142. The average difference between introduced and measured errors was 0.13 mm. The system was shown to be consistent with current techniques. Measurement variability increased slightly from 0.1 mm to 0.2 mm when the phantom setup was varied, but no significant difference in the mean measurement value was detected. Total measurement time was less than 10 minutes for all tests as a result of automation. The system’s unique features of a phosphor-coated phantom and fully automated, operator independent self-calibration offer the

  11. Technical note: Use of a digital and an optical Brix refractometer to estimate total solids in milk replacer solutions for calves.

    PubMed

    Floren, H K; Sischo, W M; Crudo, C; Moore, D A

    2016-09-01

    The Brix refractometer is used on dairy farms and calf ranches for colostrum quality (estimation of IgG concentration), estimation of serum IgG concentration in neonatal calves, and nonsalable milk evaluation of total solids for calf nutrition. Another potential use is to estimate the total solids concentrations of milk replacer mixes as an aid in monitoring feeding consistency. The purpose of this study was to evaluate the use of Brix refractometers to estimate total solids in milk replacer solutions and evaluate different replacer mixes for osmolality. Five different milk replacer powders (2 milk replacers with 28% crude protein and 25% fat and 3 with 22% crude protein and 20% fat) were mixed to achieve total solids concentrations from approximately 5.5 to 18%, for a total of 90 different solutions. Readings from both digital and optical Brix refractometers were compared with total solids. The 2 types of refractometers' readings correlated well with one another. The digital and optical Brix readings were highly correlated with the total solids percentage. A value of 1.08 to 1.47 would need to be added to the Brix reading to estimate the total solids in the milk replacer mixes with the optical and digital refractometers, respectively. Osmolality was correlated with total solids percentage of the mixes, but the relationship was different depending on the type of milk replacer. The Brix refractometer can be beneficial in estimating total solids concentration in milk replacer mixes to help monitor milk replacer feeding consistency.

  12. Design challenges of EO polymer based leaky waveguide deflector for 40 Gs/s all-optical analog-to-digital converters

    NASA Astrophysics Data System (ADS)

    Hadjloum, Massinissa; El Gibari, Mohammed; Li, Hongwu; Daryoush, Afshin S.

    2016-08-01

    Design challenges and performance optimization of an all-optical analog-to-digital converter (AOADC) is presented here. The paper addresses both microwave and optical design of a leaky waveguide optical deflector using electro-optic (E-O) polymer. The optical deflector converts magnitude variation of the applied RF voltage into variation of deflection angle out of a leaky waveguide optical beam using the linear E-O effect (Pockels effect) as part of the E-O polymer based optical waveguide. This variation of deflection angle as result of the applied RF signal is then quantized using optical windows followed by an array of high-speed photodetectors. We optimized the leakage coefficient of the leaky waveguide and its physical length to achieve the best trade-off between bandwidth and the deflected optical beam resolution, by improving the phase velocity matching between lightwave and microwave on one hand and using pre-emphasis technique to compensate for the RF signal attenuation on the other hand. In addition, for ease of access from both optical and RF perspective, a via-hole less broad bandwidth transition is designed between coplanar pads and coupled microstrip (CPW-CMS) driving electrodes. With the best reported E-O coefficient of 350 pm/V, the designed E-O deflector should allow an AOADC operating over 44 giga-samples-per-seconds with an estimated effective resolution of 6.5 bits on RF signals with Nyquist bandwidth of 22 GHz. The overall DC power consumption of all components used in this AOADC is of order of 4 W and is dominated by power consumption in the power amplifier to generate a 20 V RF voltage in 50 Ohm system. A higher sampling rate can be achieved at similar bits of resolution by interleaving a number of this elementary AOADC at the expense of a higher power consumption.

  13. Implementation of a digital optical phase conjugation system and its application to study the robustness of turbidity suppression by phase conjugation

    PubMed Central

    Cui, Meng; Yang, Changhuei

    2010-01-01

    In this work, we report a novel high capacity (number of degrees of freedom) open loop adaptive optics method, termed digital optical phase conjugation (DOPC), which provides a robust optoelectronic optical phase conjugation (OPC) solution. We showed that our prototype can phase conjugate light fields with ~3.9 x 10−3 degree accuracy over a range of ~3 degrees and can phase conjugate an input field through a relatively thick turbid medium (μsl ~13). Furthermore, we employed this system to show that the reversing of random scattering in turbid media by phase conjugation is surprisingly robust and accommodating of phase errors. An OPC wavefront with significant spatial phase errors (error uniformly distributed from – π/2 to π/2) can nevertheless allow OPC reconstruction through a scattering medium with ~40% of the efficiency achieved with phase error free OPC. PMID:20389354

  14. Implementation of a digital optical phase conjugation system and its application to study the robustness of turbidity suppression by phase conjugation.

    PubMed

    Cui, Meng; Yang, Changhuei

    2010-02-15

    In this work, we report a novel high capacity (number of degrees of freedom) open loop adaptive optics method, termed digital optical phase conjugation (DOPC), which provides a robust optoelectronic optical phase conjugation (OPC) solution. We showed that our prototype can phase conjugate light fields with approximately 3.9 x 10(-3) degree accuracy over a range of approximately 3 degrees and can phase conjugate an input field through a relatively thick turbid medium (micro(s)l approximately 13). Furthermore, we employed this system to show that the reversing of random scattering in turbid media by phase conjugation is surprisingly robust and accommodating of phase errors. An OPC wavefront with significant spatial phase errors (error uniformly distributed from - pi/2 to pi/2) can nevertheless allow OPC reconstruction through a scattering medium with approximately 40% of the efficiency achieved with phase error free OPC.

  15. A proposal for digital electro-optic switches with free-carrier dispersion effect and Goos-Hanchen shift in silicon-on-insulator waveguide corner mirror

    NASA Astrophysics Data System (ADS)

    Sun, DeGui

    2013-09-01

    In a silicon-on-insulator (SOI) waveguide corner mirror (WCM) structure, with the quantum process of a frustrated total internal reflection (FTIR) phenomenon and the time delay principle in the two-dimensional potential barrier tunneling process of a mass of particles, we derive an accurate physical model for the Goos-Hanchen (GH) shift of optical guided-mode in the FTIR process, and in principle match the GH shift jumping states with the independent guided-modes. Then, we propose and demonstrate a new regime of 1 × N digital optical switches with a matching state between the free-carrier dispersion (FCD) based refractive index modulation (RIM) of silicon to create a GH shift jumping function of a photonic signal at the reflecting interface and the independent guided-modes in the FTIR process, where a MOS-capacitor type electro-optic modulation regime is proposed and discussed to realize an effective FCD-based RIM. At the critical matching state, i.e., the incident of an optical beam is at the vicinity of Brewster angle in the WCM, a mini-change of refractive index of waveguide material can cause a great jump of GH shift along the FTIR reflecting interface, and further a 1 × N digital optical switching process could be realized. For a 350-500 nm single-mode rib waveguide made on the 220 nm CMOS-compatible SOI substrate and with the FCD effect based RIM of silicon crystal, a concentration variation of 1018-1019 cm-3 has caused a 0.5-2.5 μm GH shift of reflected beam, which is at 2-5 times of a mode-size and hence radically convinces an optical switching function with a 1 × 3-1 × 10 scale.

  16. Digital Radiography

    NASA Technical Reports Server (NTRS)

    1986-01-01

    System One, a digital radiography system, incorporates a reusable image medium (RIM) which retains an image. No film is needed; the RIM is read with a laser scanner, and the information is used to produce a digital image on an image processor. The image is stored on an optical disc. System allows the radiologist to "dial away" unwanted images to compare views on three screens. It is compatible with existing equipment and cost efficient. It was commercialized by a Stanford researcher from energy selective technology developed under a NASA grant.

  17. Manipulation of the coherent spatial and angular shifts of Goos-Hänchen effect to realize the digital optical switch in silicon-on-insulator waveguide corner

    NASA Astrophysics Data System (ADS)

    Sun, DeGui

    2016-11-01

    In this work, based on the quantum process of the Goos-Hänchen (GH) spatial shift, a quantum process of the GH angular shift is also theoretically investigated. Then, the coherence between spatial and angular shifts in the GH effect is discovered and developed to manipulate the final total displacement for a digital optical switch. It is found that a waveguide corner structure always makes the reflected guide-mode have a GH angular shift in the minus direction when the incident beam is in the Brewster angle vicinity, while it always makes the spatial shift in the plus direction. Meanwhile, the coherence of these two GH shifts has an interesting distribution with the incident angle, and only in the common linear response area to the incident angle, the two GH shifts are mutually enhancing, and then a mini refractive index modulation of the guided-mode at the reflecting interface can create a great stable jump of reflected beam displacement at an eigenstate under the GH effect. As a result, on the 220 nm CMOS-compatible silicon-on-insulator waveguide platform, with a tapered multimode interference (MMI) waveguide, a 5 × 1018cm-3 concentration variation of free carriers can create an absolute digital total displacement of 8-25 μm of the reflected beam on the MMI waveguide output end, leading to a 1 × 5 scale digital optical switching function.

  18. Digital Optical Circuit Technology.

    DTIC Science & Technology

    1985-03-01

    under financial support of the Max-Planck- Gesell - schaft (MPG) and the Deutsche Forschungsgemeinschaft (DFG) and in part at the Tech- nische...mode picosecond pulses by injection locking of an AIGaAs semiconductor laser", Appl. Phys. Lett., vol. 41, 1982, pp. 14 - 16 0 G. Arnold , P. Russer, K...stripe laser", Appl. Phys. Lett., 39, pp. 27-29 (1981). 12. Peterman, K. and Arnold , G., "Noise and distortion charaL -ristics of semi- conductor lases

  19. Real-time swept source optical coherence tomography imaging of the human airway using a microelectromechanical system endoscope and digital signal processor

    PubMed Central

    Su, Jianping; Zhang, Jun; Yu, Lingfeng; Colt, Henri G; Brenner, Matthew; Chen, Zhongping

    2009-01-01

    A fast-scan-rate swept laser for optical coherence tomography (OCT) is suitable to record and analyze a 3-D image volume. However, the whole OCT system speed is limited by data streaming, processing, and storage. In this case, postprocessing is a common technique. Endoscopic clinical applications prefer onsite diagnosis, which requires a real-time technique. Parallel digital signal processors were applied to stream and process data directly from a data digitizer. A real-time system with 20-kHz axial line speed, which was limited only by our swept laser scan rate, was implemented. To couple with the system speed, an endoscope based on an improved 3-D microelectromechanical motor (diameter 1.5 mm, length 9.4 mm) was developed. In vivo 3-D imaging of the human airway was demonstrated. PMID:18601523

  20. Real-time swept source optical coherence tomography imaging of the human airway using a microelectromechanical system endoscope and digital signal processor.

    PubMed

    Su, Jianping; Zhang, Jun; Yu, Lingfeng; G Colt, Henri; Brenner, Matthew; Chen, Zhongping

    2008-01-01

    A fast-scan-rate swept laser for optical coherence tomography (OCT) is suitable to record and analyze a 3-D image volume. However, the whole OCT system speed is limited by data streaming, processing, and storage. In this case, postprocessing is a common technique. Endoscopic clinical applications prefer onsite diagnosis, which requires a real-time technique. Parallel digital signal processors were applied to stream and process data directly from a data digitizer. A real-time system with 20-kHz axial line speed, which was limited only by our swept laser scan rate, was implemented. To couple with the system speed, an endoscope based on an improved 3-D microelectromechanical motor (diameter 1.5 mm, length 9.4 mm) was developed. In vivo 3-D imaging of the human airway was demonstrated.

  1. Anti-drift and auto-alignment mechanism for an astigmatic atomic force microscope system based on a digital versatile disk optical head.

    PubMed

    Hwu, E-T; Illers, H; Wang, W-M; Hwang, I-S; Jusko, L; Danzebrink, H-U

    2012-01-01

    In this work, an anti-drift and auto-alignment mechanism is applied to an astigmatic detection system (ADS)-based atomic force microscope (AFM) for drift compensation and cantilever alignment. The optical path of the ADS adopts a commercial digital versatile disc (DVD) optical head using the astigmatic focus error signal. The ADS-based astigmatic AFM is lightweight, compact size, low priced, and easy to use. Furthermore, the optical head is capable of measuring sub-atomic displacements of high-frequency AFM probes with a sub-micron laser spot (~570 nm, FWHM) and a high-working bandwidth (80 MHz). Nevertheless, conventional DVD optical heads suffer from signal drift problems. In a previous setup, signal drifts of even thousands of nanometers had been measured. With the anti-drift and auto-alignment mechanism, the signal drift is compensated by actuating a voice coil motor of the DVD optical head. A nearly zero signal drift was achieved. Additional benefits of this mechanism are automatic cantilever alignment and simplified design.

  2. Coherent receiver design based on digital signal processing in optical high-speed intersatellite links with M-phase-shift keying

    NASA Astrophysics Data System (ADS)

    Schaefer, Semjon; Gregory, Mark; Rosenkranz, Werner

    2016-11-01

    We present simulative and experimental investigations of different coherent receiver designs for high-speed optical intersatellite links. We focus on frequency offset (FO) compensation in homodyne and intradyne detection systems. The considered laser communication terminal uses an optical phase-locked loop (OPLL), which ensures stable homodyne detection. However, the hardware complexity increases with the modulation order. Therefore, we show that software-based intradyne detection is an attractive alternative for OPLL-based homodyne systems. Our approach is based on digital FO and phase noise compensation, in order to achieve a more flexible coherent detection scheme. Analytic results will further show the theoretical impact of the different detection schemes on the receiver sensitivity. Finally, we compare the schemes in terms of bit error ratio measurements and optimal receiver design.

  3. Theoretical calculation on ICI reduction using digital coherent superposition of optical OFDM subcarrier pairs in the presence of laser phase noise.

    PubMed

    Yi, Xingwen; Xu, Bo; Zhang, Jing; Lin, Yun; Qiu, Kun

    2014-12-15

    Digital coherent superposition (DCS) of optical OFDM subcarrier pairs with Hermitian symmetry can reduce the inter-carrier-interference (ICI) noise resulted from phase noise. In this paper, we show two different implementations of DCS-OFDM that have the same performance in the presence of laser phase noise. We complete the theoretical calculation on ICI reduction by using the model of pure Wiener phase noise. By Taylor expansion of the ICI, we show that the ICI power is cancelled to the second order by DCS. The fourth order term is further derived out and only decided by the ratio of laser linewidth to OFDM subcarrier symbol rate, which can greatly simplify the system design. Finally, we verify our theoretical calculations in simulations and use the analytical results to predict the system performance. DCS-OFDM is expected to be beneficial to certain optical fiber transmissions.

  4. Reconfigurable intensity modulation and direct detection optical transceivers for variable-rate wavelength-division-multiplexing passive optical networks utilizing digital signal processing-based symbol mapper

    NASA Astrophysics Data System (ADS)

    Zhang, Zhiguo; Zhang, Bingbing; Chen, Yanxu; Chen, Xue

    2017-01-01

    Variable-rate intensity modulation and direct detection-based optical transceivers with software-controllable reconfigurability and transmission performance adaptability are experimentally demonstrated, utilizing M-QAM symbol mapping implemented in MATLAB® programs. A frequency division multiplexing-based symbol demapping and wavelength management method is proposed for the symbol demapper and tunable laser management used in colorless optical network unit.

  5. Real-time experimental demonstrations of software reconfigurable optical OFDM transceivers utilizing DSP-based digital orthogonal filters for SDN PONs.

    PubMed

    Duan, X; Giddings, R P; Bolea, M; Ling, Y; Cao, B; Mansoor, S; Tang, J M

    2014-08-11

    Real-time optical OFDM (OOFDM) transceivers with on-line software-controllable channel reconfigurability and transmission performance adaptability are experimentally demonstrated, for the first time, utilizing Hilbert-pair-based 32-tap digital orthogonal filters implemented in FPGAs. By making use of an 8-bit DAC/ADC operating at 2GS/s, an oversampling factor of 2 and an EML intensity modulator, the demonstrated RF conversion-free transceiver supports end-to-end real-time simultaneous adaptive transmissions, within a 1GHz signal spectrum region, of a 2.03Gb/s in-phase OOFDM channel and a 1.41Gb/s quadrature-phase OOFDM channel over a 25km SSMF IMDD system. In addition, detailed experimental explorations are also undertaken of key physical mechanisms limiting the maximum achievable transmission performance, impacts of transceiver's channel multiplexing/demultiplexing operations on the system BER performance, and the feasibility of utilizing adaptive modulation to combat impairments associated with low-complexity digital filter designs. Furthermore, experimental results indicate that the transceiver incorporating a fixed digital orthogonal filter DSP architecture can be made transparent to various signal modulation formats up to 64-QAM.

  6. Candidate isolated neutron stars and other optically blank x-ray fields identified from the rosat all-sky and sloan digital sky surveys

    SciTech Connect

    Agueros, Marcel A.; Anderson, Scott F.; Margon, Bruce; Haberl, Frank; Voges, Wolfgang; Annis, James; Schneider, Donald P.; Brinkmann, Jonathan; /Apache Point Observ.

    2005-11-01

    Only seven radio-quiet isolated neutron stars (INSs) emitting thermal X rays are known, a sample that has yet to definitively address such fundamental issues as the equation of state of degenerate neutron matter. We describe a selection algorithm based on a cross-correlation of the ROSAT All-Sky Survey (RASS) and the Sloan Digital Sky Survey (SDSS) that identifies X-ray error circles devoid of plausible optical counterparts to the SDSS g {approx} 22 magnitudes limit. We quantitatively characterize these error circles as optically blank; they may host INSs or other similarly exotic X-ray sources such as radio-quiet BL Lacs, obscured AGN, etc. Our search is an order of magnitude more selective than previous searches for optically blank RASS error circles, and excludes the 99.9% of error circles that contain more common X-ray-emitting subclasses. We find 11 candidates, nine of which are new. While our search is designed to find the best INS candidates and not to produce a complete list of INSs in the RASS, it is reassuring that our number of candidates is consistent with predictions from INS population models. Further X-ray observations will obtain pinpoint positions and determine whether these sources are entirely optically blank at g {approx} 22, supporting the presence of likely isolated neutron stars and perhaps enabling detailed follow-up studies of neutron star physics.

  7. Successive approximation-like 4-bit full-optical analog-to-digital converter based on Kerr-like nonlinear photonic crystal ring resonators

    NASA Astrophysics Data System (ADS)

    Tavousi, Alireza; Mansouri-Birjandi, Mohammad Ali; Saffari, Mehdi

    2016-09-01

    Implementing of photonic sampling and quantizing analog-to-digital converters (ADCs) enable us to extract a single binary word from optical signals without need for extra electronic assisting parts. This would enormously increase the sampling and quantizing time as well as decreasing the consumed power. To this end, based on the concept of successive approximation method, a 4-bit full-optical ADC that operates using the intensity-dependent Kerr-like nonlinearity in a two dimensional photonic crystal (2DPhC) platform is proposed. The Silicon (Si) nanocrystal is chosen because of the suitable nonlinear material characteristic. An optical limiter is used for the clamping and quantization of each successive levels that represent the ADC bits. In the proposal, an energy efficient optical ADC circuit is implemented by controlling the system parameters such as ring-to-waveguide coupling coefficients, the ring's nonlinear refractive index, and the ring's length. The performance of the ADC structure is verified by the simulation using finite difference time domain (FDTD) method.

  8. Predictive dynamic digital holography

    NASA Astrophysics Data System (ADS)

    Sulaiman, Sennan; Gibson, Steve; Spencer, Mark

    2016-09-01

    Digital holography has received recent attention for many imaging and sensing applications, including imaging through turbulent and turbid media, adaptive optics, three dimensional projective display technology and optical tweezing. A significant obstacle for digital holography in real-time applications, such as wavefront sensing for high energy laser systems and high speed imaging for target tracking, is the fact that digital holography is computationally intensive; it requires iterative virtual wavefront propagation and hill-climbing to optimize some sharpness criteria. This paper demonstrates real-time methods for digital holography based on approaches developed recently at UCLA for optimal and adaptive identification, prediction, and control of optical wavefronts. The methods presented integrate minimum variance wavefront prediction into digital holography schemes to short-circuit the computationally intensive algorithms for iterative propagation of virtual wavefronts and hill climbing for sharpness optimization.

  9. Making digital phantoms with spectral and spatial light modulators for quantitative applications of hyperspectral optical medical imaging devices

    NASA Astrophysics Data System (ADS)

    Chon, Bonghwan; Tokumasu, Fuyuki; Lee, Ji Youn; Allen, David W.; Rice, Joseph P.; Hwang, Jeeseong

    2015-03-01

    We present a procedure to generate digital phantoms with a hyperspectral image projector (HIP) consisting of two liquid crystal on silicon (LCoS) spatial light modulators (SLMs). The digital phantoms are 3D image data cubes of the spatial distribution of spectrally resolved abundances of intracellular light-absorbing oxy-hemoglobin molecules in single erythrocytes. Spectrally and spatially resolved image data indistinguishable from the real scene may be used as standards to calibrate image sensors and validate image analysis algorithms for their measurement quality, performance consistency, and inter-laboratory comparisons for quantitative biomedical imaging applications.

  10. Videodisc and Optical Digital Disk Technologies and Their Applications in Libraries. A Report to the Council on Library Resources.

    ERIC Educational Resources Information Center

    Information Systems Consultants, Inc., Washington, DC.

    This report examines the potential impact of optical media--videodiscs, compact audio discs, and optical disks, tapes, and cards--in library related applications. A detailed consideration of the technology includes discussion of the underlying principles, the various forms in which the technology is marketed, production methods and costs, and the…

  11. Hypermedia and Digital Optical Media Technologies as Applied to a Prototype Geographic and Threat Recognition (GEOTREC) Training and Reference Tool

    DTIC Science & Technology

    1990-03-01

    a two-monitor system, you see the film running by on the video display, while commentary scrolls along with it on your [computer’s] screen. You stop...well as its soundtrack in digital form. Both of these DOM have been commercially available in meaningful quantities since the early to mid-1980s. Only

  12. ISDN: The Digital Difference.

    ERIC Educational Resources Information Center

    Piedmo, Greg

    1995-01-01

    Integrated services digital network (ISDN) is a dial-up digital transmission service supporting transmission of audio, video, and text data over standard copper telephone wires or fiber optic cables. Advantages of ISDN over analog transmission include the ability of one phone line to support up to three simultaneous, separate conversations (phone,…

  13. Three-dimensional motion-picture imaging of dynamic object by parallel-phase-shifting digital holographic microscopy using an inverted magnification optical system

    NASA Astrophysics Data System (ADS)

    Fukuda, Takahito; Shinomura, Masato; Xia, Peng; Awatsuji, Yasuhiro; Nishio, Kenzo; Matoba, Osamu

    2016-10-01

    We constructed a parallel-phase-shifting digital holographic microscopy (PPSDHM) system using an inverted magnification optical system, and succeeded in three-dimensional (3D) motion-picture imaging for 3D displacement of a microscopic object. In the PPSDHM system, the inverted and afocal magnification optical system consisted of a microscope objective (16.56 mm focal length and 0.25 numerical aperture) and a convex lens (300 mm focal length and 82 mm aperture diameter). A polarization-imaging camera was used to record multiple phase-shifted holograms with a single-shot exposure. We recorded an alum crystal, sinking down in aqueous solution of alum, by the constructed PPSDHM system at 60 frames/s for about 20 s and reconstructed high-quality 3D motion-picture image of the crystal. Then, we calculated amounts of displacement of the crystal from the amounts in the focus plane and the magnifications of the magnification optical system, and obtained the 3D trajectory of the crystal by that amounts.

  14. Microprocessor Control of a Fast Analog-to-Digital Converter for an Underwater Fiber Optic Data Link

    DTIC Science & Technology

    1988-03-01

    in the next chapter presents the reasoning for multiplexing the N input channels between the analog-to-digital (A/D) conversion and encoding functions...elopment for a number of reasons . The added flexibilit,’ diLCUssed in the previou section was the most compelling advantage. Being A first design effort...The 80C86 manufactured by Harris Semi conductor was chosen for a multitude of reasons , but foremost was that it was a CMOS device and readil

  15. Four-dimensional key design in amplitude, phase, polarization and distance for optical encryption based on polarization digital holography and QR code.

    PubMed

    Lin, Chao; Shen, Xueju; Li, Baochen

    2014-08-25

    We demonstrate that all parameters of optical lightwave can be simultaneously designed as keys in security system. This multi-dimensional property of key can significantly enlarge the key space and further enhance the security level of the system. The single-shot off-axis digital holography with orthogonal polarized reference waves is employed to perform polarization state recording on object wave. Two pieces of polarization holograms are calculated and fabricated to be arranged in reference arms to generate random amplitude and phase distribution respectively. When reconstruction, original information which is represented with QR code can be retrieved using Fresnel diffraction with decryption keys and read out noise-free. Numerical simulation results for this cryptosystem are presented. An analysis on the key sensitivity and fault tolerance properties are also provided.

  16. Efficiency analysis on platform over the top (OTT) to deploy content and applications (edutainment) in digital television on optical network link

    NASA Astrophysics Data System (ADS)

    Puche, William S.; Sierra, Javier E.; Moreno, Gustavo A.

    2014-08-01

    The convergence of new technologies in the digital world has made devices with internet connectivity such as televisions, smatphone, Tablet, Blu-ray, game consoles, among others, to increase more and more. Therefore the major research centers are in the task of improving the network performance to mitigate the bottle neck phenomenon regarding capacity and high transmission rates in information and data. The implementation of standard HbbTV (Hybrid Broadcast Broadband TV), and technological platforms OTT (Over the Top), capable of distributing video, audio, TV, and other Internet services via devices connected directly to the cloud. Therefore a model to improve the transmission capacity required by content distribution networks (CDN) for online TV, with high-capacity optical networks is proposed.

  17. Improved performance of analog and digital acousto-optic modulation with feedback under profiled beam propagation for secure communication using chaos

    NASA Astrophysics Data System (ADS)

    Almehmadi, Fares S.; Chatterjee, Monish R.

    2014-12-01

    Using intensity feedback, the closed-loop behavior of an acousto-optic hybrid device under profiled beam propagation has been recently shown to exhibit wider chaotic bands potentially leading to an increase in both the dynamic range and sensitivity to key parameters that characterize the encryption. In this work, a detailed examination is carried out vis-à-vis the robustness of the encryption/decryption process relative to parameter mismatch for both analog and pulse code modulation signals, and bit error rate (BER) curves are used to examine the impact of additive white noise. The simulations with profiled input beams are shown to produce a stronger encryption key (i.e., much lower parametric tolerance thresholds) relative to simulations with uniform plane wave input beams. In each case, it is shown that the tolerance for key parameters drops by factors ranging from 10 to 20 times below those for uniform plane wave propagation. Results are shown to be at consistently lower tolerances for secure transmission of analog and digital signals using parameter tolerance measures, as well as BER performance measures for digital signals. These results hold out the promise for considerably greater information transmission security for such a system.

  18. Demonstration of digital phase-sensitive boosting to extend signal reach for long-haul WDM systems using optical phase-conjugated copy.

    PubMed

    Tian, Yue; Huang, Yue-Kai; Zhang, Shaoliang; Prucnal, Paul R; Wang, Ting

    2013-02-25

    We demonstrate a hybrid optical/digital phase-sensitive boosting (PSB) technique for long-haul wavelength division multiplexing (WDM) transmission systems. The approach uses four-wave mixing (FWM) to generate a phase-conjugated idler alongside the original signal. At the receiver, the signal and idler are jointly detected, and the phases of the idler symbols are conjugated and summed with the signal symbols to suppress noise and nonlinear phase distortion. The proposed hybrid PSB scheme is independent of modulation format and does not require an optical phase-locked loop to achieve phase matching required by conventional phase-sensitive amplifiers. Our simulation and experimental results of 112-Gb/s dual-polarization quadrature phase-shift-keying (DP-QPSK) transmission confirmed the principle of the PSB scheme, attaining a Q-factor improvement of 2.4 dB over conventional single-channel transmission after 4,800 km of dispersion-managed fiber (DMF) link at the expense of 50% reduction in spectral efficiency and extending the system reach by 60% to 7,680 km.

  19. Real-time optical wireless transmissions of digital TV signals using white InGaN LEDs grown with an asymmetric quantum barrier.

    PubMed

    Tsai, Chia-Lung; Chen, Yen-Jen

    2015-10-19

    The feasibility of using InGaN LEDs grown with asymmetric barrier layer (ABL) as transmitters in visible light communications is investigated experimentally. Compared with normal LEDs, the improvement in the spontaneous emission rate due to enhanced carrier localization and better uniformity of carrier distribution in ABL-containing MQWs leads to the fabricated LEDs can exhibit a 32.6% (@ 350 mA) increase in emission intensity and a 10.5% increase in modulation bandwidth. After eliminating the slow-responding phosphorescent components emitting from the phosphor-converted white LEDs, an open eye-diagram at 180 Mb/s is demonstrated over a distance of 100 cm in directed line-of-sight optical links. With the use of proposed LEDs, real-time transmissions of digital TV signals over a moderate distance (~100 cm) in free space is shown to be available in a 150 Mbit/s white LED-based optical link with conventional on-off keying modulation.

  20. Investigation on cytoskeleton dynamics for no-adherent cells subjected to point-like stimuli by digital holographic microscopy and holographic optical trapping

    NASA Astrophysics Data System (ADS)

    Miccio, Lisa; Merola, Francesco; Memmolo, Pasquale; Mugnano, Martina; Fusco, Sabato; Netti, Paolo A.; Ferraro, Pietro

    2014-05-01

    Guiding, controlling and studying cellular functions are challenging themes in the biomedical field, as they are fundamental prerequisites for new therapeutic strategies from tissue regeneration to controlled drug delivery. In recent years, multidisciplinary studies in nanotechnology offer new tools to investigate important biophysical phenomena in response to the local physical characteristics of the extracellular environment, some examples are the mechanisms of cell adhesion, migration, communication and differentiation. Indeed for reproducing the features of the extracellular matrix in vitro, it is essential to develop active devices that evoke as much as possible the natural cellular environment. Our investigation is in the framework of studying and clarifying the biophysical mechanisms of the interaction between cells and the microenvironment in which they exist. We implement an optical tweezers setup to investigate cell material interaction and we use Digital Holography as non-invasive imaging technique in microscopy. We exploit Holographic Optical Tweezers arrangement in order to trap and manage functionalized micrometric latex beads to induce mechanical deformation in suspended cells. A lot of papers in literature examine the dynamics of the cytoskeleton when cells adhere on substrates and nowadays well established cell models are based on such research activities. Actually, the natural cell environment is made of a complex extracellular matrix and the single cell behavior is due to intricate interactions with the environment and are strongly correlated to the cell-cell interactions. Our investigation is devoted to understand the inner cell mechanism when it is mechanically stressed by point-like stimulus without the substrate influence.

  1. Parallel-mode scanning optical sectioning using digital Fresnel holography with three-wave interference phase-shifting.

    PubMed

    Kelner, Roy; Rosen, Joseph

    2016-02-08

    The Fresnel incoherent correlation holography (FINCH) method is applicable to various techniques of imaging, including fluorescence microscopy. Recently, a FINCH configuration capable of optical sectioning, using a scanning phase pinhole, has been suggested [Optica 1, 70 (2014)]. This capability is highly important in situations that demand the suppression of out-of-focus information from the hologram reconstruction of a specific plane of interest, such as the imaging of thick samples in biology. In this study, parallel-mode scanning using multiple phase pinholes is suggested as a means to shorten the acquisition time in an optical sectioning FINCH configuration. The parallel-mode scanning is enabled through a phase-shifting procedure that extracts the mixed term of two out of three interfering beams.

  2. Real-time optical multiple-object recognition and tracking demonstration: A friendly challenge to the digital field

    NASA Technical Reports Server (NTRS)

    Chao, Tien-Hsin; Liu, Hua-Kuang

    1980-01-01

    Researchers demonstrated the first optical multiple object tracking system. The system is capable of simultaneous tracking of multiple objects, each with independent movements in real-time, limited only to the TV frame rate (30 msec). In order to perform a similar tracking operation, a large computer system and very complex software would be needed. Although researchers have demonstrated the tracking of only 3 objects, the system capacity can easily be expanded by 2 orders of magnitude.

  3. MULTI-CORE AND OPTICAL PROCESSOR RELATED APPLICATIONS RESEARCH AT OAK RIDGE NATIONAL LABORATORY

    SciTech Connect

    Barhen, Jacob; Kerekes, Ryan A; ST Charles, Jesse Lee; Buckner, Mark A

    2008-01-01

    High-speed parallelization of common tasks holds great promise as a low-risk approach to achieving the significant increases in signal processing and computational performance required for next generation innovations in reconfigurable radio systems. Researchers at the Oak Ridge National Laboratory have been working on exploiting the parallelization offered by this emerging technology and applying it to a variety of problems. This paper will highlight recent experience with four different parallel processors applied to signal processing tasks that are directly relevant to signal processing required for SDR/CR waveforms. The first is the EnLight Optical Core Processor applied to matched filter (MF) correlation processing via fast Fourier transform (FFT) of broadband Dopplersensitive waveforms (DSW) using active sonar arrays for target tracking. The second is the IBM CELL Broadband Engine applied to 2-D discrete Fourier transform (DFT) kernel for image processing and frequency domain processing. And the third is the NVIDIA graphical processor applied to document feature clustering. EnLight Optical Core Processor. Optical processing is inherently capable of high-parallelism that can be translated to very high performance, low power dissipation computing. The EnLight 256 is a small form factor signal processing chip (5x5 cm2) with a digital optical core that is being developed by an Israeli startup company. As part of its evaluation of foreign technology, ORNL's Center for Engineering Science Advanced Research (CESAR) had access to a precursor EnLight 64 Alpha hardware for a preliminary assessment of capabilities in terms of large Fourier transforms for matched filter banks and on applications related to Doppler-sensitive waveforms. This processor is optimized for array operations, which it performs in fixed-point arithmetic at the rate of 16 TeraOPS at 8-bit precision. This is approximately 1000 times faster than the fastest DSP available today. The optical core

  4. Optical engineering application of modeled photosynthetically active radiation (PAR) for high-speed digital camera dynamic range optimization

    NASA Astrophysics Data System (ADS)

    Alves, James; Gueymard, Christian A.

    2009-08-01

    As efforts to create accurate yet computationally efficient estimation models for clear-sky photosynthetically active solar radiation (PAR) have succeeded, the range of practical engineering applications where these models can be successfully applied has increased. This paper describes a novel application of the REST2 radiative model (developed by the second author) in optical engineering. The PAR predictions in this application are used to predict the possible range of instantaneous irradiances that could impinge on the image plane of a stationary video camera designed to image license plates on moving vehicles. The overall spectral response of the camera (including lens and optical filters) is similar to the 400-700 nm PAR range, thereby making PAR irradiance (rather than luminance) predictions most suitable for this application. The accuracy of the REST2 irradiance predictions for horizontal surfaces, coupled with another radiative model to obtain irradiances on vertical surfaces, and to standard optical image formation models, enable setting the dynamic range controls of the camera to ensure that the license plate images are legible (unsaturated with adequate contrast) regardless of the time of day, sky condition, or vehicle speed. A brief description of how these radiative models are utilized as part of the camera control algorithm is provided. Several comparisons of the irradiance predictions derived from the radiative model versus actual PAR measurements under varying sky conditions with three Licor sensors (one horizontal and two vertical) have been made and showed good agreement. Various camera-to-plate geometries and compass headings have been considered in these comparisons. Time-lapse sequences of license plate images taken with the camera under various sky conditions over a 30-day period are also analyzed. They demonstrate the success of the approach at creating legible plate images under highly variable lighting, which is the main goal of this

  5. Dental wear estimation using a digital intra-oral optical scanner and an automated 3D computer vision method.

    PubMed

    Meireles, Agnes Batista; Vieira, Antonio Wilson; Corpas, Livia; Vandenberghe, Bart; Bastos, Flavia Souza; Lambrechts, Paul; Campos, Mario Montenegro; Las Casas, Estevam Barbosa de

    2016-01-01

    The objective of this work was to propose an automated and direct process to grade tooth wear intra-orally. Eight extracted teeth were etched with acid for different times to produce wear and scanned with an intra-oral optical scanner. Computer vision algorithms were used for alignment and comparison among models. Wear volume was estimated and visual scoring was achieved to determine reliability. Results demonstrated that it is possible to directly detect submillimeter differences in teeth surfaces with an automated method with results similar to those obtained by direct visual inspection. The investigated method proved to be reliable for comparison of measurements over time.

  6. Digital Libraries.

    ERIC Educational Resources Information Center

    Fox, Edward A.; Urs, Shalini R.

    2002-01-01

    Provides an overview of digital libraries research, practice, and literature. Highlights include new technologies; redefining roles; historical background; trends; creating digital content, including conversion; metadata; organizing digital resources; services; access; information retrieval; searching; natural language processing; visualization;…

  7. Digital Avionics

    NASA Technical Reports Server (NTRS)

    Koelbl, Terry G.; Ponchak, Denise; Lamarche, Teresa

    2002-01-01

    The field of digital avionics experienced another year of important advances in civil aviation, military systems, and space applications. As a result of the events of 9/11/2001, NASA has pursued activities to apply its aerospace technologies toward improved aviation security. Both NASA Glenn Research Center and Langley Research Center have performed flight research demonstrations using advanced datalink concepts to transmit live pictures from inside a jetliner, and to downlink the contents of the plane's 'black box' recorder in real time. The U.S. Navy and General Electric demonstrated survivable engine control (SEC) algorithms during engine ground tests at the Weapons Survivability Laboratory at China Lake. The scientists at Boeing Satellite Systems advanced the field of stellar inertial technology with the development of a new method for positioning optical star trackers on satellites.

  8. 3D mechanical analysis of aeronautical plain bearings: Validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography

    NASA Astrophysics Data System (ADS)

    Germaneau, A.; Peyruseigt, F.; Mistou, S.; Doumalin, P.; Dupré, J.-C.

    2010-06-01

    On Airbus aircraft, spherical plain bearings are used on many components; in particular to link engine to pylon or pylon to wing. Design of bearings is based on contact pressure distribution on spherical surfaces. To determine this distribution, a 3D analysis of the mechanical behaviour of aeronautical plain bearing is presented in this paper. A numerical model has been built and validated from a comparison with 3D experimental measurements of kinematic components. For that, digital volume correlation (DVC) coupled with optical scanning tomography (OST) is employed to study the mechanical response of a plain bearing model made in epoxy resin. Experimental results have been compared with the ones obtained from the simulated model. This comparison enables us to study the influence of various boundary conditions to build the FE model. Some factors have been highlighted like the fitting behaviour which can radically change contact pressure distribution. This work shows the contribution of a representative mechanical environment to study precisely mechanical response of aeronautical plain bearings.

  9. Simultaneous Optical Recording in Multiple Cells by Digital Holographic Microscopy of Chloride Current Associated to Activation of the Ligand-Gated Chloride Channel GABAA Receptor

    PubMed Central

    Jourdain, Pascal; Boss, Daniel; Rappaz, Benjamin; Moratal, Corinne; Hernandez, Maria-Clemencia; Depeursinge, Christian

    2012-01-01

    Chloride channels represent a group of targets for major clinical indications. However, molecular screening for chloride channel modulators has proven to be difficult and time-consuming as approaches essentially rely on the use of fluorescent dyes or invasive patch-clamp techniques which do not lend themselves to the screening of large sets of compounds. To address this problem, we have developed a non-invasive optical method, based on digital holographic microcopy (DHM), allowing monitoring of ion channel activity without using any electrode or fluorescent dye. To illustrate this approach, GABAA mediated chloride currents have been monitored with DHM. Practically, we show that DHM can non-invasively provide the quantitative determination of transmembrane chloride fluxes mediated by the activation of chloride channels associated with GABAA receptors. Indeed through an original algorithm, chloride currents elicited by application of appropriate agonists of the GABAA receptor can be derived from the quantitative phase signal recorded with DHM. Finally, chloride currents can be determined and pharmacologically characterized non-invasively simultaneously on a large cellular sampling by DHM. PMID:23236427

  10. Using MountainsMap (Digital Surf) surface analysis software as an analysis tool for x-ray mirror optical metrology data

    NASA Astrophysics Data System (ADS)

    Duffy, Alan; Yates, Brian; Takacs, Peter

    2012-09-01

    The Optical Metrology Facility at the Canadian Light Source (CLS) has recently purchased MountainsMap surface analysis software from Digital Surf and we report here our experiences with this package and its usefulness as a tool for examining metrology data of synchrotron x-ray mirrors. The package has a number of operators that are useful for determining surface roughness and slope error including compliance with ISO standards (viz. ISO 4287 and ISO 25178). The software is extensible with MATLAB scripts either by loading an m-file or by a user written script. This makes it possible to apply a custom operator to measurement data sets. Using this feature we have applied the simple six-line MATLAB code for the direct least square fitting of ellipses developed by Fitzgibbon et. al. to investigate the residual slope error of elliptical mirrors upon the removal of the best-fit-ellipse. The software includes support for many instruments (e.g. Zygo, MicroMap, etc...) and can import ASCII data (e.g. LTP data). The stitching module allows the user to assemble overlapping images and we report on our experiences with this feature applied to MicroMap surface roughness data. The power spectral density function was determined for the stitched and unstitched data and compared.

  11. Optical evaluation of digital micromirror devices (DMDs) with UV-grade fused silica, sapphire, and magnesium fluoride windows and long-term reflectance of bare devices

    NASA Astrophysics Data System (ADS)

    Quijada, Manuel A.; Travinsky, Anton; Vorobiev, Dmitry; Ninkov, Zoran; Raisanen, Alan; Robberto, Massimo; Heap, Sara

    2016-07-01

    Digital micromirror devices (DMDs) are commercial micro-electromechanical systems, consisting of millions of mirrors which can be individually addressed and tilted into one of two states (+/-12°). These devices were developed to create binary patterns in video projectors, in the visible range. Commercially available DMDs are hermetically sealed and extremely reliable. Recently, DMDs have been identified as an alternative to microshutter arrays for space-based multi-object spectrometers (MOS). Specifically, the MOS at the heart of the proposed Galactic Evolution Spectroscopic Explorer (GESE) uses the DMD as a reprogrammable slit mask. Unfortunately, the protective borosilicate windows limit the use of DMDs in the UV and IR regimes, where the glass has insufficient throughput. In this work, we present our efforts to replace standard DMD windows with custom windows made from UV-grade fused silica, low-absorption optical sapphire (LAOS) and magnesium fluoride (MgF2). We present transmission measurements of the antireflection coated windows and the reflectance of bare (window removed) DMDs. Furthermore, we investigated the long-term stability of the DMD reflectance and experiments for coating DMD active area with a layer of pure aluminum (Al) to boost reflectance performance in the UV spectral range (200-400 nm).

  12. Loop gain stabilizing with an all-digital automatic-gain-control method for high-precision fiber-optic gyroscope.

    PubMed

    Zheng, Yue; Zhang, Chunxi; Li, Lijing; Song, Lailiang; Chen, Wen

    2016-06-10

    For a fiber-optic gyroscope (FOG) using electronic dithers to suppress the dead zone, without a fixed loop gain, the deterministic compensation for the dither signals in the control loop of the FOG cannot remain accurate, resulting in the dither residuals in the FOG rotation rate output and the navigation errors in the inertial navigation system. An all-digital automatic-gain-control method for stabilizing the loop gain of the FOG is proposed. By using a perturbation square wave to measure the loop gain of the FOG and adding an automatic gain control loop in the conventional control loop of the FOG, we successfully obtain the actual loop gain and make the loop gain converge to the reference value. The experimental results show that in the case of 20% variation in the loop gain, the dither residuals are successfully eliminated and the standard deviation of the FOG sampling outputs is decreased from 2.00  deg/h to 0.62  deg/h (sampling period 2.5 ms, 10 points smoothing). With this method, the loop gain of the FOG can be stabilized over the operation temperature range and in the long-time application, which provides a solid foundation for the engineering applications of the high-precision FOG.

  13. Optical Evaluation of Digital Micromirror Devices (DMDs) with UV-Grade Fused Silica, Sapphire, and Magnesium Fluoride Windows and Longterm Reflectance of Bare Devices

    NASA Technical Reports Server (NTRS)

    Quijada, Manuel A.; Travinsky, Anton; Vorobiev, Dmitry; Ninkov, Zoran; Raisanen, Alan; Robberto, Massimo; Heap, Sara

    2016-01-01

    Digital micromirror devices (DMDs) are commercial micro-electromechanical systems, consisting of millions of mirrors which can be individually addressed and tilted into one of two states (+/-12deg). These devices were developed to create binary patterns in video projectors, in the visible range. Commercially available DMDs are hermetically sealed and extremely reliable. Recently, DMDs have been identified as an alternative to microshutter arrays for space-based multi-object spectrometers (MOS). Specifically, the MOS at the heart of the proposed Galactic Evolution Spectroscopic Explorer (GESE) uses the DMD as a reprogrammable slit mask. Unfortunately, the protective borosilicate windows limit the use of DMDs in the UV and IR regimes, where the glass has insufficient throughput. In this work, we present our efforts to replace standard DMD windows with custom windows made from UV-grade fused silica, low-absorption optical sapphire (LAOS) and magnesium fluoride (MgF2). We present transmission measurements of the antireflection coated windows and the reflectance of bare (window removed) DMDs. Furthermore, we investigated the long-term stability of the DMD reflectance and experiments for coating DMD active area with a layer of pure aluminum (Al) to boost reflectance performance in the UV spectral range (200-400 nm).

  14. Application of ground-penetrating radar, digital optical borehole images, and cores for characterization of porosity hydraulic conductivity and paleokarst in the Biscayne aquifer, southeastern Florida, USA

    USGS Publications Warehouse

    Cunningham, K.J.

    2004-01-01

    This paper presents examples of ground-penetrating radar (GPR) data from two study sites in southeastern Florida where karstic Pleistocene platform carbonates that comprise the unconfined Biscayne aquifer were imaged. Important features shown on resultant GPR profiles include: (1) upward and lateral qualitative interpretative distribution of porosity and hydraulic conductivity; (2) paleotopographic relief on karstic subaerial exposure surfaces; and (3) vertical stacking of chronostratigraphic high-frequency cycles (HFCs). These characteristics were verified by comparison to rock properties observed and measured in core samples, and identified in digital optical borehole images. Results demonstrate that an empirical relation exists between measured whole-core porosity and hydraulic conductivity, observed porosity on digital optical borehole images, formation conductivity, and GPR reflection amplitudes-as porosity and hydraulic conductivity determined from core and borehole images increases, formation conductivity increases, and GPR reflection amplitude decreases. This relation allows for qualitative interpretation of the vertical and lateral distribution of porosity and hydraulic conductivity within HFCs. Two subtidal HFCs in the uppermost Biscayne aquifer have significantly unique populations of whole-core porosity values and vertical hydraulic conductivity values. Porosity measurements from one cycle has a median value about two to three times greater than the values from the other HFC, and median values of vertical hydraulic-conductivity about three orders of magnitude higher than the other HFC. The HFC with the higher porosity and hydraulic conductivity values is shown as a discrete package of relatively low-amplitude reflections, whereas the HFC characterized by lower porosity and hydraulic-conductivity measurements is expressed by higher amplitude reflections. Porosity and hydraulic-conductivity values measured from whole-core samples, and vuggy porosity

  15. Optical XOR gate

    SciTech Connect

    Vawter, G. Allen

    2013-11-12

    An optical XOR gate is formed as a photonic integrated circuit (PIC) from two sets of optical waveguide devices on a substrate, with each set of the optical waveguide devices including an electroabsorption modulator electrically connected in series with a waveguide photodetector. The optical XOR gate utilizes two digital optical inputs to generate an XOR function digital optical output. The optical XOR gate can be formed from III-V compound semiconductor layers which are epitaxially deposited on a III-V compound semiconductor substrate, and operates at a wavelength in the range of 0.8-2.0 .mu.m.

  16. Optical NOR gate

    DOEpatents

    Skogen, Erik J.; Tauke-Pedretti, Anna

    2011-09-06

    An optical NOR gate is formed from two pair of optical waveguide devices on a substrate, with each pair of the optical waveguide devices consisting of an electroabsorption modulator electrically connected in series with a waveguide photodetector. The optical NOR gate utilizes two digital optical inputs and a continuous light input to provide a NOR function digital optical output. The optical NOR gate can be formed from III-V compound semiconductor layers which are epitaxially deposited on a III-V compound semiconductor substrate, and operates at a wavelength in the range of 0.8-2.0 .mu.m.

  17. A Digital Solar Aspect Sensor

    NASA Technical Reports Server (NTRS)

    Albus, James S.

    1961-01-01

    The solar aspect sensor described herein performs the analog-to-digital conversion of data optically. To accomplish this, it uses a binary "Gray code" light mask to produce a digital indication, in vehicle-fixed coordinates, of the elevation and azimuth angles of incident light from the sun. This digital solar aspect sensor system, in Explorer X, provided measurements of both elevation and azimuth angles to +/- 2 degrees at a distance of over 140,000 statute miles.

  18. AN OPTICAL CATALOG OF GALAXY CLUSTERS OBTAINED FROM AN ADAPTIVE MATCHED FILTER FINDER APPLIED TO SLOAN DIGITAL SKY SURVEY DATA RELEASE 6

    SciTech Connect

    Szabo, T.; Pierpaoli, E.; Pipino, A.; Dong, F.; Gunn, J. E-mail: pierpaol@usc.edu

    2011-07-20

    We present a new cluster catalog extracted from the Sloan Digital Sky Survey Data Release 6 (SDSS DR6) using an adaptive matched filter (AMF) cluster finder. We identify 69,173 galaxy clusters in the redshift range 0.045 {<=} z < 0.78 in 8420 deg{sup 2} of the sky. We provide angular position, redshift, richness, core, and virial radii estimates for these clusters, as well as an error analysis for each of these quantities. We also provide a catalog of more than 205,000 galaxies representing the three brightest galaxies in the r band which are possible brightest cluster galaxy (BCG) candidates. We show basic properties of the BCG candidates and study how their luminosity scales in redshift and cluster richness. We compare our catalog with the maxBCG and GMBCG catalogs, as well as with that of Wen et al. We match between 30% and 50% of clusters between catalogs over all overlapping redshift ranges. We find that the percentage of matches increases with the richness for all catalogs. We cross match the AMF catalog with available X-ray data in the same area of the sky and find 539 matches, 119 of which with temperature measurements. We present scaling relations between optical and X-ray properties and cluster center comparison. We find that both {Lambda}{sub 200} and R{sub 200} correlate well with both L{sub X} and T{sub X} , with no significant difference in trend if we restrict the matches to flux-limited X-ray samples.

  19. Lattice Boltzmann methods applied to large-scale three-dimensional virtual cores constructed from digital optical borehole images of the karst carbonate Biscayne aquifer in southeastern Florida

    USGS Publications Warehouse

    Michael Sukop,; Cunningham, Kevin J.

    2014-01-01

    Digital optical borehole images at approximately 2 mm vertical resolution and borehole caliper data were used to create three-dimensional renderings of the distribution of (1) matrix porosity and (2) vuggy megaporosity for the karst carbonate Biscayne aquifer in southeastern Florida. The renderings based on the borehole data were used as input into Lattice Boltzmann methods to obtain intrinsic permeability estimates for this extremely transmissive aquifer, where traditional aquifer test methods may fail due to very small drawdowns and non-Darcian flow that can reduce apparent hydraulic conductivity. Variogram analysis of the borehole data suggests a nearly isotropic rock structure at lag lengths up to the nominal borehole diameter. A strong correlation between the diameter of the borehole and the presence of vuggy megaporosity in the data set led to a bias in the variogram where the computed horizontal spatial autocorrelation is strong at lag distances greater than the nominal borehole size. Lattice Boltzmann simulation of flow across a 0.4 × 0.4 × 17 m (2.72 m3 volume) parallel-walled column of rendered matrix and vuggy megaporosity indicates a high hydraulic conductivity of 53 m s−1. This value is similar to previous Lattice Boltzmann calculations of hydraulic conductivity in smaller limestone samples of the Biscayne aquifer. The development of simulation methods that reproduce dual-porosity systems with higher resolution and fidelity and that consider flow through horizontally longer renderings could provide improved estimates of the hydraulic conductivity and help to address questions about the importance of scale.

  20. Parallel optical sampler

    DOEpatents

    Tauke-Pedretti, Anna; Skogen, Erik J; Vawter, Gregory A

    2014-05-20

    An optical sampler includes a first and second 1.times.n optical beam splitters splitting an input optical sampling signal and an optical analog input signal into n parallel channels, respectively, a plurality of optical delay elements providing n parallel delayed input optical sampling signals, n photodiodes converting the n parallel optical analog input signals into n respective electrical output signals, and n optical modulators modulating the input optical sampling signal or the optical analog input signal by the respective electrical output signals, and providing n successive optical samples of the optical analog input signal. A plurality of output photodiodes and eADCs convert the n successive optical samples to n successive digital samples. The optical modulator may be a photodiode interconnected Mach-Zehnder Modulator. A method of sampling the optical analog input signal is disclosed.

  1. Optical Digital Image Storage System

    DTIC Science & Technology

    1991-03-18

    Reading Room which is not 12X or 24X. NARA has a Minolta microfilm reader printer with a 17X lens, but this machine is an outmoded electrostatic wet ...melting point, and is not susceptible to oxidation . A protective layer and adhesive layer are next. A disk is really two disks that are glued together to...lioer travels along the track at a certain rate looking for its reflection (see Figure A-18). Whei it encounters a hole or a blister, the beam is

  2. Digital imaging.

    PubMed

    Daniel, Gregory B

    2009-07-01

    Medical imaging is rapidly moving toward a digital-based image system. An understanding of the principles of digital imaging is necessary to evaluate features of imaging systems and can play an important role in purchasing decisions.

  3. Digital Imaging.

    ERIC Educational Resources Information Center

    Howell, Les

    1996-01-01

    Defines a digital photograph as a numerical record of light electronically measured and recorded by a computer's scanner. States that most personal computers cannot do digital photography successfully and that digital pictures can be hard to manage and present a storage problem. Finds that, once the school has the hardware/software, picture…

  4. Digital Citizenship

    ERIC Educational Resources Information Center

    Isman, Aytekin; Canan Gungoren, Ozlem

    2014-01-01

    Era in which we live is known and referred as digital age.In this age technology is rapidly changed and developed. In light of these technological advances in 21st century, schools have the responsibility of training "digital citizen" as well as a good citizen. Digital citizens must have extensive skills, knowledge, Internet and …

  5. Exploring virtual reality technology and the Oculus Rift for the examination of digital pathology slides

    PubMed Central

    Farahani, Navid; Post, Robert; Duboy, Jon; Ahmed, Ishtiaque; Kolowitz, Brian J.; Krinchai, Teppituk; Monaco, Sara E.; Fine, Jeffrey L.; Hartman, Douglas J.; Pantanowitz, Liron

    2016-01-01

    Background: Digital slides obtained from whole slide imaging (WSI) platforms are typically viewed in two dimensions using desktop personal computer monitors or more recently on mobile devices. To the best of our knowledge, we are not aware of any studies viewing digital pathology slides in a virtual reality (VR) environment. VR technology enables users to be artificially immersed in and interact with a computer-simulated world. Oculus Rift is among the world's first consumer-targeted VR headsets, intended primarily for enhanced gaming. Our aim was to explore the use of the Oculus Rift for examining digital pathology slides in a VR environment. Methods: An Oculus Rift Development Kit 2 (DK2) was connected to a 64-bit computer running Virtual Desktop software. Glass slides from twenty randomly selected lymph node cases (ten with benign and ten malignant diagnoses) were digitized using a WSI scanner. Three pathologists reviewed these digital slides on a 27-inch 5K display and with the Oculus Rift after a 2-week washout period. Recorded endpoints included concordance of final diagnoses and time required to examine slides. The pathologists also rated their ease of navigation, image quality, and diagnostic confidence for both modalities. Results: There was 90% diagnostic concordance when reviewing WSI using a 5K display and Oculus Rift. The time required to examine digital pathology slides on the 5K display averaged 39 s (range 10–120 s), compared to 62 s with the Oculus Rift (range 15–270 s). All pathologists confirmed that digital pathology slides were easily viewable in a VR environment. The ratings for image quality and diagnostic confidence were higher when using the 5K display. Conclusion: Using the Oculus Rift DK2 to view and navigate pathology whole slide images in a virtual environment is feasible for diagnostic purposes. However, image resolution using the Oculus Rift device was limited. Interactive VR technologies such as the Oculus Rift are novel tools

  6. Electronic post-compensation for nonlinear phase fluctuations in a 1000-km 20-Gbit/s optical quadrature phase-shift keying transmission system using the digital coherent receiver.

    PubMed

    Kikuchi, Kazuro

    2008-01-21

    We demonstrate electronic post-compensation for nonlinear phase fluctuation in a 1000-km 20-Gbit/s optical quadrature phase-shift keying (QPSK) transmission system, where group-velocity dispersion is well managed. The inter-symbol interference (ISI) at the transmitter induces the nonlinear phase fluctuation through self-phase modulation (SPM) of the signal transmitted through a fiber. However, when the optimized phase shift proportional to the intensity fluctuation is given to the complex amplitude of the signal electric field by using a digital coherent receiver, the nonlinear phase fluctuation can be reduced effectively.

  7. Digital Natives or Digital Tribes?

    ERIC Educational Resources Information Center

    Watson, Ian Robert

    2013-01-01

    This research builds upon the discourse surrounding digital natives. A literature review into the digital native phenomena was undertaken and found that researchers are beginning to identify the digital native as not one cohesive group but of individuals influenced by other factors. Primary research by means of questionnaire survey of technologies…

  8. Fiber optic multiplex optical transmission system

    NASA Technical Reports Server (NTRS)

    Bell, C. H. (Inventor)

    1977-01-01

    A multiplex optical transmission system which minimizes external interference while simultaneously receiving and transmitting video, digital data, and audio signals is described. Signals are received into subgroup mixers for blocking into respective frequency ranges. The outputs of these mixers are in turn fed to a master mixer which produces a composite electrical signal. An optical transmitter connected to the master mixer converts the composite signal into an optical signal and transmits it over a fiber optic cable to an optical receiver which receives the signal and converts it back to a composite electrical signal. A de-multiplexer is coupled to the output of the receiver for separating the composite signal back into composite video, digital data, and audio signals. A programmable optic patch board is interposed in the fiber optic cables for selectively connecting the optical signals to various receivers and transmitters.

  9. Acquisition hardware for digital imaging.

    PubMed

    Widmer, William R

    2008-01-01

    Use of digital radiography is growing rapidly in veterinary medicine. Two basic digital imaging systems are available, computed radiography (CR) and direct digital radiography (DDR). Computed radiographic detectors use a two-step process for image capture and processing. Image capture is by X-ray sensitive phosphors in the image plate. The image plate reader transforms the latent phosphor image to light photons that are converted to an analog electrical signal. An analog to digital converter is used to digitize the electrical signal before computer analysis. Direct digital detectors provide digital data by direct readout after image capture--a reader unnecessary. Types of DDR detectors are flat panel detectors and charge coupled device (CCD) detectors. Flat panel detectors are composed of layers of semiconductors for image capture with transistor and microscopic circuitry embedded in a pixel array. Direct converting flat panel detectors convert incident X-rays directly into electrical charges. Indirect detectors convert X-rays to visible light, then to electrical charges. All flat panel detectors send a digitized electrical signal to a computer using a direct link. Charge coupled device detectors have a small chip similar to those used in digital cameras. A scintillator first converts X-rays to a light signal that is minified by an optical system before reaching the chip. The chip sends a digital signal directly to a computer. Both CR and DDR provide quality diagnostic images. CR is a mature technology while DDR is an emerging technology.

  10. Interferometer combines laser light source and digital counting system

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Measurement of small linear displacements in digital readouts with extreme accuracy and sensitivity is achieved by an interferometer. The instrument combines a digital electro-optical fringe-counting system and a laser light source.

  11. Automated Optical Target Recognition.

    DTIC Science & Technology

    1994-12-01

    A multi-resolution signal processing approach to object recognition is presented using an optical correlator for generating a wavelet transform . The...This report presents an overview of continuous and discrete wavelet transforms. Both digital and optical implementations of the discrete wavelet ... transform are discussed. Examples of typical wavelet basis functions are compared and the constraints imposed by optical implementations are discussed

  12. Effect of optical digitizer selection on the application accuracy of a surgical localization system-a quantitative comparison between the OPTOTRAK and flashpoint tracking systems

    NASA Technical Reports Server (NTRS)

    Li, Q.; Zamorano, L.; Jiang, Z.; Gong, J. X.; Pandya, A.; Perez, R.; Diaz, F.

    1999-01-01

    Application accuracy is a crucial factor for stereotactic surgical localization systems, in which space digitization camera systems are one of the most critical components. In this study we compared the effect of the OPTOTRAK 3020 space digitization system and the FlashPoint Model 3000 and 5000 3D digitizer systems on the application accuracy for interactive localization of intracranial lesions. A phantom was mounted with several implantable frameless markers which were randomly distributed on its surface. The target point was digitized and the coordinates were recorded and compared with reference points. The differences from the reference points represented the deviation from the "true point." The root mean square (RMS) was calculated to show the differences, and a paired t-test was used to analyze the results. The results with the phantom showed that, for 1-mm sections of CT scans, the RMS was 0.76 +/- 0. 54 mm for the OPTOTRAK system, 1.23 +/- 0.53 mm for the FlashPoint Model 3000 3D digitizer system, and 1.00 +/- 0.42 mm for the FlashPoint Model 5000 system. These preliminary results showed that there is no significant difference between the three tracking systems, and, from the quality point of view, they can all be used for image-guided surgery procedures. Copyright 1999 Wiley-Liss, Inc.

  13. Digital Imaging

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Digital Imaging is the computer processed numerical representation of physical images. Enhancement of images results in easier interpretation. Quantitative digital image analysis by Perceptive Scientific Instruments, locates objects within an image and measures them to extract quantitative information. Applications are CAT scanners, radiography, microscopy in medicine as well as various industrial and manufacturing uses. The PSICOM 327 performs all digital image analysis functions. It is based on Jet Propulsion Laboratory technology, is accurate and cost efficient.

  14. Digital printing

    NASA Astrophysics Data System (ADS)

    Sobotka, Werner K.

    1997-02-01

    Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

  15. TOCM digital color photography

    NASA Astrophysics Data System (ADS)

    Zhang, Baoying; Mu, Guoguang; Fang, Zhiliang; Li, Zhengqun; Fang, Hui; Yang, Yong

    2009-11-01

    In this paper, total optical color modulator (TOCM) digital color photography is presented. TOCM has the character of multi-wave superposed in spatial domain and separated in frequency domain. If TOCM is close-contacted with the image plane of a black-and-white (B&W) CCD, the encoding B&W CCD is formed. Image from the encoding B&W CCD are digital encoded by the TOCM. The decoded color image can be obtained by computer program. The program includes four main steps. The first step is Fourier transforming of the encoded image. The second step is filtering the spectra of the first and zero order in frequency domain. The third is inverse Fourier transforming of the filtered spectra. The last is melting the image with zero order. Then the digital color image will be shown on the display of the computer. The experiment proves that this technique is feasible. The principle of encoding color information in B&W image can be applied to color-blind sensors to get digital color image. Furthermore, it can be applied to digital multi-spectra color photography.

  16. Two-fold transmission reach enhancement enabled by transmitter-side digital backpropagation and optical frequency comb-derived information carriers.

    PubMed

    Temprana, E; Myslivets, E; Liu, L; Ataie, V; Wiberg, A; Kuo, B P P; Alic, N; Radic, S

    2015-08-10

    We demonstrate a two-fold reach extension of 16 GBaud 16-Quadrature Amplitude Modulation (QAM) wavelength division multiplexed (WDM) system based on erbium doped fiber amplifier (EDFA)-only amplified standard and single mode fiber -based link. The result is enabled by transmitter-side digital backpropagation and frequency referenced carriers drawn from a parametric comb.

  17. Digitizing Preservation.

    ERIC Educational Resources Information Center

    Conway, Paul

    1994-01-01

    Discussion of digital imaging technology focuses on its potential use for preservation of library materials. Topics addressed include converting microfilm to digital; the high cost of conversion from paper or microfilm; quality; indexing; database management issues; incompatibility among imaging systems; longevity; cooperative pilot projects; and…

  18. Digital Discrimination

    ERIC Educational Resources Information Center

    Blansett, Jim

    2008-01-01

    In recent years, the Internet has become a digital commons of commerce and education. However, accessibility standards have often been overlooked online, and the digital equivalents to curb-cuts and other physical accommodations have only rarely been implemented to serve those with print disabilities. (A print disability can be a learning…

  19. Digital TMI

    NASA Technical Reports Server (NTRS)

    Rios, Joseph

    2012-01-01

    Presenting the current status of the Digital TMI project to visiting members of the FAA Command Center. Digital TMI is an effort to store national-level traffic management initiatives in a standards-compliant manner. Work is funded by the FAA.

  20. Stealth transmission of temporal phase en/decoded polarization-modulated-code-shift-keying optical-code-division multiple-access signal over synchronous digital hierarchy network with asynchronous detection

    NASA Astrophysics Data System (ADS)

    Chen, Yinfang; Wang, Rong; Fang, Tao; Pu, Tao; Xiang, Peng; Zhu, Huatao; Zheng, Jilin

    2014-06-01

    An innovative approach for security-enhanced optical stealth transmission in a synchronous digital hierarchy network is proposed and experimentally investigated. The security enhancement is achieved through a signal modulation format, so-called polarization-modulated-code-shift-keying, which is implemented with two superstructured fiber Bragg gratings-based optical-code-division multiple-access encoders and a polarization modulator. The proposed modulation format can provide a constant energy level for both bits 0's and 1's, which avoids secure vulnerability of single-stealth-user with on-off-keying modulation before coupling into the host channel and after the cascade of filters. Moreover, a self-made cost-effective gain-switched distributed feedback laser with relatively narrow spectrum is first employed as a stealth optical source, which greatly reduces the system cost and complexity. The stealth signal is recovered and detected asynchronously. The experimental results show high secure performance and robustness against eavesdropping, while keeping a bit error rate below forward error correction limit.

  1. Digital Ethics/Going Digital.

    ERIC Educational Resources Information Center

    Wilson, Bradley

    1996-01-01

    Finds that the recent National Press Photographers Association code of ethics can serve as a model for any photography staff. Discusses how digital imaging is becoming commonplace in classrooms, due to decreasing costs and easier software. Explains digital terminology. Concludes that time saved in the darkroom and at the printer is now spent on…

  2. Optical encryption interface

    NASA Technical Reports Server (NTRS)

    Jackson, Deborah J. (Inventor)

    1998-01-01

    An analog optical encryption system based on phase scrambling of two-dimensional optical images and holographic transformation for achieving large encryption keys and high encryption speed. An enciphering interface uses a spatial light modulator for converting a digital data stream into a two dimensional optical image. The optical image is further transformed into a hologram with a random phase distribution. The hologram is converted into digital form for transmission over a shared information channel. A respective deciphering interface at a receiver reverses the encrypting process by using a phase conjugate reconstruction of the phase scrambled hologram.

  3. Optical NAND gate

    DOEpatents

    Skogen, Erik J.; Raring, James; Tauke-Pedretti, Anna

    2011-08-09

    An optical NAND gate is formed from two pair of optical waveguide devices on a substrate, with each pair of the optical waveguide devices consisting of an electroabsorption modulator and a photodetector. One pair of the optical waveguide devices is electrically connected in parallel to operate as an optical AND gate; and the other pair of the optical waveguide devices is connected in series to operate as an optical NOT gate (i.e. an optical inverter). The optical NAND gate utilizes two digital optical inputs and a continuous light input to provide a NAND function output. The optical NAND gate can be formed from III-V compound semiconductor layers which are epitaxially deposited on a III-V compound semiconductor substrate, and operates at a wavelength in the range of 0.8-2.0 .mu.m.

  4. [Investigation of influencing variables on the computer-aided simulation of contacts in dynamic occlusion based on optically digitized plaster casts].

    PubMed

    Böröcz, Z; Dirksen, D; Thomas, C; Runte, C; Bollmann, F; von Bally, G

    2004-05-01

    In dentistry, mechanical articulators with which mandibular movements can be reproduced in dentals casts play a major role. Commonly used semiadjustable articulators, however, have major limitations: On the one hand, the movement of the mandible is not reproduced exactly, on the other, they do not provide time-related information on jaw movement. Both problems can be solved by replacing the mechanical articulator by a digital simulation ("virtual articulator") based on digitized plaster casts and electronically recorded masticatory movements. We present a system for the 3D measurement of plaster casts in a skull-related, anatomical coordinate system using the fringe projection technique, and electronically recorded condylar movements. Using numerical algorithms, the contacts between upper and low jaw, and the angle of rotation of the temporomandibular joint can be computed for each movement in dynamic occlusion. Taking the data recorded from a patient as an example, the influence of the accuracy of the digitization of plaster casts on the computation of the rotation of the temporomandibular joint is discussed in relation to the anatomy of the masticatory apparatus.

  5. Digital holographic nondestructive testing of laminate composite

    NASA Astrophysics Data System (ADS)

    Karray, Mayssa; Christophe, Poilane; Gargouri, Mohamed; Picart, Pascal

    2016-09-01

    Optical digital holographic techniques can be used for nondestructive testing of materials. Digital holographic nondestructive testing essentially measures deformations on the surface of the object. However, there is sufficient sensitivity to detect subsurface and internal defects in metallic and composite specimens. We investigate and discuss the vibration analysis of laminated composite glass-epoxy using time averaging in digital Fresnel holography to visualize the modes of vibration and to test the integrity of the structures of studied materials.

  6. Digital Audio Tape: Yet Another Archival Media?

    ERIC Educational Resources Information Center

    Vanker, Anthony D.

    1989-01-01

    Provides an introduction to the technical aspects of digital audiotape and compares it to other computer storage devices such as optical data disks and magnetic tape cartridges in terms of capacity, transfer rate, and cost. The current development of digital audiotape standards is also discussed. (five references) (CLB)

  7. Doppler extraction with a digital VCO

    NASA Technical Reports Server (NTRS)

    Starner, E. R.; Nossen, E. J.

    1977-01-01

    Digitally controlled oscillator in phased-locked loop may be useful for data communications systems, or may be modified to serve as information extraction component of microwave or optical system for collision avoidance or automatic braking. Instrument is frequency-synthesizing device with output specified precisely by digital number programmed into frequency register.

  8. Digital Epidemiology

    PubMed Central

    Salathé, Marcel; Bengtsson, Linus; Bodnar, Todd J.; Brewer, Devon D.; Brownstein, John S.; Buckee, Caroline; Campbell, Ellsworth M.; Cattuto, Ciro; Khandelwal, Shashank; Mabry, Patricia L.; Vespignani, Alessandro

    2012-01-01

    Mobile, social, real-time: the ongoing revolution in the way people communicate has given rise to a new kind of epidemiology. Digital data sources, when harnessed appropriately, can provide local and timely information about disease and health dynamics in populations around the world. The rapid, unprecedented increase in the availability of relevant data from various digital sources creates considerable technical and computational challenges. PMID:22844241

  9. Digital Collections, Digital Libraries & the Digitization of Cultural Heritage Information.

    ERIC Educational Resources Information Center

    Lynch, Clifford

    2002-01-01

    Discusses digital collections and digital libraries. Topics include broadband availability; digital rights protection; content, both non-profit and commercial; digitization of cultural content; sustainability; metadata harvesting protocol; infrastructure; authorship; linking multiple resources; data mining; digitization of reference works;…

  10. New method for quantification of vuggy porosity from digital optical borehole images as applied to the karstic Pleistocene limestone of the Biscayne aquifer, southeastern Florida

    USGS Publications Warehouse

    Cunningham, K.J.; Carlson, J.I.; Hurley, N.F.

    2004-01-01

    Vuggy porosity is gas- or fluid-filled openings in rock matrix that are large enough to be seen with the unaided eye. Well-connected vugs can form major conduits for flow of ground water, especially in carbonate rocks. This paper presents a new method for quantification of vuggy porosity calculated from digital borehole images collected from 47 test coreholes that penetrate the karstic Pleistocene limestone of the Biscayne aquifer, southeastern Florida. Basically, the method interprets vugs and background based on the grayscale color of each in digital borehole images and calculates a percentage of vuggy porosity. Development of the method was complicated because environmental conditions created an uneven grayscale contrast in the borehole images that makes it difficult to distinguish vugs from background. The irregular contrast was produced by unbalanced illumination of the borehole wall, which was a result of eccentering of the borehole-image logging tool. Experimentation showed that a simple, single grayscale threshold would not realistically differentiate between the grayscale contrast of vugs and background. Therefore, an equation was developed for an effective subtraction of the changing grayscale contrast, due to uneven illumination, to produce a grayscale threshold that successfully identifies vugs. In the equation, a moving average calculated around the circumference of the borehole and expressed as the background grayscale intensity is defined as a baseline from which to identify a grayscale threshold for vugs. A constant was derived empirically by calibration with vuggy porosity values derived from digital images of slabbed-core samples and used to make the subtraction from the background baseline to derive the vug grayscale threshold as a function of azimuth. The method should be effective in estimating vuggy porosity in any carbonate aquifer. ?? 2003 Published by Elsevier B.V.

  11. Digital Telematics: Present and Future.

    ERIC Educational Resources Information Center

    Stalberg, Christian E.

    1987-01-01

    This overview of developments in international telecommunications networks focuses on their importance for developing countries and the necessary interdependence of all countries. Highlights include digital technology, telephone service, packet switching networks, communications satellites, fiber optic cables, and possible future developments.…

  12. Virtual mask digital electron beam lithography

    DOEpatents

    Baylor, Larry R.; Thomas, Clarence E.; Voelkl, Edgar; Moore, James A.; Simpson, Michael L.; Paulus, Michael J.

    1999-01-01

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  13. Virtual mask digital electron beam lithography

    DOEpatents

    Baylor, L.R.; Thomas, C.E.; Voelkl, E.; Moore, J.A.; Simpson, M.L.; Paulus, M.J.

    1999-04-06

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made. 5 figs.

  14. Direct-to-digital holography and holovision

    DOEpatents

    Thomas, Clarence E.; Baylor, Larry R.; Hanson, Gregory R.; Rasmussen, David A.; Voelkl, Edgar; Castracane, James; Simkulet, Michelle; Clow, Lawrence

    2000-01-01

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  15. Digitally Enhanced Heterodyne Interferometry

    NASA Technical Reports Server (NTRS)

    Shaddock, Daniel; Ware, Brent; Lay, Oliver; Dubovitsky, Serge

    2010-01-01

    Spurious interference limits the performance of many interferometric measurements. Digitally enhanced interferometry (DEI) improves measurement sensitivity by augmenting conventional heterodyne interferometry with pseudo-random noise (PRN) code phase modulation. DEI effectively changes the measurement problem from one of hardware (optics, electronics), which may deteriorate over time, to one of software (modulation, digital signal processing), which does not. DEI isolates interferometric signals based on their delay. Interferometric signals are effectively time-tagged by phase-modulating the laser source with a PRN code. DEI improves measurement sensitivity by exploiting the autocorrelation properties of the PRN to isolate only the signal of interest and reject spurious interference. The properties of the PRN code determine the degree of isolation.

  16. Digital image storage.

    PubMed

    Wallack, Seth

    2008-01-01

    Digital image archival requires less physical storage space, allows for rapid storage and retrieval and avoids loss in image quality over time or with image duplication compared with film storage. Because medical imaging data are critically important and, by law, must be stored in a safe, accessible manner, it is imperative not to have one computer error destroy all copies of the image data. Several options for image storage media are available including magnetic tape, optical media, spinning disks and solid state. Other considerations include on-site vs. off-site storage, redundancy, on-line vs. off-line storage, and removable storage media for disaster recovery. The different storage media can be used in different configurations to provide sufficient protection of digital data. Choose a storage system that will keep your data safe from unauthorized access, hardware failure, and clinic disasters.

  17. Metrological digital audio reconstruction

    DOEpatents

    Fadeyev; Vitaliy , Haber; Carl

    2004-02-19

    Audio information stored in the undulations of grooves in a medium such as a phonograph record may be reconstructed, with little or no contact, by measuring the groove shape using precision metrology methods coupled with digital image processing and numerical analysis. The effects of damage, wear, and contamination may be compensated, in many cases, through image processing and analysis methods. The speed and data handling capacity of available computing hardware make this approach practical. Two examples used a general purpose optical metrology system to study a 50 year old 78 r.p.m. phonograph record and a commercial confocal scanning probe to study a 1920's celluloid Edison cylinder. Comparisons are presented with stylus playback of the samples and with a digitally re-mastered version of an original magnetic recording. There is also a more extensive implementation of this approach, with dedicated hardware and software.

  18. Digital Light Processing and MEMS: reflecting the digital display needs of the networked society

    NASA Astrophysics Data System (ADS)

    Hornbeck, Larry J.

    1996-08-01

    Digital video technology is becoming increasingly important to the networked society. The natural interface to digital video is a digital display, one that accepts electrical bits at its input and converts them into optical bits at the output. The digital-to-analog processing function is performed in the mind of the observer. Texas Instruments has developed such a display with its recent market introduction of the Digital Light ProcessingTM (DLPTM) projection display. DLP technology is based on the Digital Micromirror DeviceTM (DMDTM), a microelectromechanical systems (MEMS) array of semiconductor-based digital light switches. The DMD switching array precisely controls a light source for projection display and digital printing applications. This paper presents an overview of DLP technology along with the architecture, projection operation, manufacture, and reliability of the DMD. Features of DMD technology that distinguish it from conventional MEMS technology are explored. Finally, the paper provides a view of DLP business opportunities.

  19. Submillisecond Optical Knife-Edge Testing

    NASA Technical Reports Server (NTRS)

    Thurlow, P.

    1983-01-01

    Fast computer-controlled sampling of optical knife-edge response (KER) signal increases accuracy of optical system aberration measurement. Submicrosecond-response detectors in optical focal plane convert optical signals to electrical signals converted to digital data, sampled and feed into computer for storage and subsequent analysis. Optical data are virtually free of effects of index-of-refraction gradients.

  20. Wavelength-Division Multiplexing Of Bipolar Digital Signals

    NASA Technical Reports Server (NTRS)

    Gibbons, Ronnie D.; Ubele, John L., II

    1994-01-01

    In system, bipolar digital data transmitted by use of wavelength-division multiplexing on single optical fiber. Two different wavelengths used to transmit pulses signifying "positive" or "negative" bipolar digital data. Simultaneous absence of pulses at both wavelengths signifies digital "zero."

  1. High-Speed Digital Interferometry

    NASA Technical Reports Server (NTRS)

    De Vine, Glenn; Shaddock, Daniel A.; Ware, Brent; Spero, Robert E.; Wuchenich, Danielle M.; Klipstein, William M.; McKenzie, Kirk

    2012-01-01

    Digitally enhanced heterodyne interferometry (DI) is a laser metrology technique employing pseudo-random noise (PRN) codes phase-modulated onto an optical carrier. Combined with heterodyne interferometry, the PRN code is used to select individual signals, returning the inherent interferometric sensitivity determined by the optical wavelength. The signal isolation arises from the autocorrelation properties of the PRN code, enabling both rejection of spurious signals (e.g., from scattered light) and multiplexing capability using a single metrology system. The minimum separation of optical components is determined by the wavelength of the PRN code.

  2. A fast and high-sensitive dual-wavelength diffuse optical tomography system using digital lock-in photon-counting technique

    NASA Astrophysics Data System (ADS)

    Chen, Weiting; Yi, Xi; Zhao, Huijuan; Gao, Feng

    2014-09-01

    We presented a novel dual-wavelength diffuse optical imaging system which can perform 2-D or 3-D imaging fast and high-sensitively for monitoring the dynamic change of optical parameters. A newly proposed lock-in photon-counting detection method was adopted for week optical signal collection, which brought in excellent property as well as simplified geometry. Fundamental principles of the lock-in photon-counting detection were elaborately demonstrated, and the feasibility was strictly verified by the linearity experiment. Systemic performance of the prototype set up was experimentally accessed, including stray light rejection and inherent interference. Results showed that the system possessed superior anti-interference capability (under 0.58% in darkroom) compared with traditional photon-counting detection, and the crosstalk between two wavelengths was lower than 2.28%. For comprehensive assessment, 2-D phantom experiments towards relatively large dimension model (diameter of 4cm) were conducted. Different absorption targets were imaged to investigate detection sensitivity. Reconstruction image under all conditions was exciting, with a desirable SNR. Study on image quality v.s. integration time put forward a new method for accessing higher SNR with the sacrifice of measuring speed. In summary, the newly developed system showed great potential in promoting detection sensitivity as well as measuring speed. This will make substantial progress in dynamically tracking the blood concentration distribution in many clinical areas, such as small animal disease modeling, human brain activity research and thick tissues (for example, breast) diagnosis.

  3. Digital karyotyping.

    PubMed

    Wang, Tian-Li; Maierhofer, Christine; Speicher, Michael R; Lengauer, Christoph; Vogelstein, Bert; Kinzler, Kenneth W; Velculescu, Victor E

    2002-12-10

    Alterations in the genetic content of a cell are the underlying cause of many human diseases, including cancers. We have developed a method, called digital karyotyping, that provides quantitative analysis of DNA copy number at high resolution. This approach involves the isolation and enumeration of short sequence tags from specific genomic loci. Analysis of human cancer cells by using this method identified gross chromosomal changes as well as amplifications and deletions, including regions not previously known to be altered. Foreign DNA sequences not present in the normal human genome could also be readily identified. Digital karyotyping provides a broadly applicable means for systematic detection of DNA copy number changes on a genomic scale.

  4. Digital Perspective Correction For Cylindrical Holographic Stereograms

    NASA Astrophysics Data System (ADS)

    Jaffey, Stephen M.; Dutta, Kalyan

    1983-04-01

    This paper discusses digital perspective correction in the multiplex hologram,also known as Cross hologram or white light cylindrical holographic stereogram. It presents digital analogues of previously reported optical methods, and demonstrates the digital implementation of Benton's method. It introduces a non-linear remapping of the input views to compensate for a non-uniform color viewing position. Simulation results are included on the relative accuracy of different algorithms. Digital correction can be applied to both real and artificial objects such as computed tomography (CT) data.

  5. Nematic Cells for Digital Light Deflection

    NASA Technical Reports Server (NTRS)

    Pishnyak, Oleg; Golovin, Andrii; Laventovich, Oleg; Kreminska, Liubov; Winker, Bruce; Pouch, John; Miranda, Felix

    2008-01-01

    Smectic A (SmA) materials can be used in non-mechanical, digital beam deflectors (DBDs) as fillers for passive birefringent prisms based on decoupled pairs of electrically controlled, liquid crystalline polarization rotators, like twisted nematic (TN) cells and passive deflectors. DBDs are used in free-space laser communications, optical fiber communications, optical switches, scanners, and in-situ wavefront correction.

  6. Fabrication and test of digital output interface devices for gas turbine electronic controls

    NASA Technical Reports Server (NTRS)

    Newirth, D. M.; Koenig, E. W.

    1978-01-01

    A program was conducted to develop an innovative digital output interface device, a digital effector with optical feedback of the fuel metering valve position, for future electronic controls for gas turbine engines. A digital effector (on-off solenoids driven directly by on-off signals from a digital electronic controller) with optical position feedback was fabricated, coupled with the fuel metering valve, and tested under simulated engine operating conditions. The testing indicated that a digital effector with optical position feedback is a suitable candidate, with proper development for future digital electronic gas turbine controls. The testing also identified several problem areas which would have to be overcome in a final production configuration.

  7. Digital psychiatry.

    PubMed

    Tang, S; Helmeste, D

    2000-02-01

    The American managed care movement has been viewed as a big experiment and is being watched closely by the rest of the world. In the meanwhile, computer-based information technology (IT) is changing the practice of medicine, much more rapidly than managed care. A New World of digitized knowledge and information has been created. Although literature on IT in psychiatry is largely absent in peer-reviewed psychiatric journals, IT is finding its way into all aspects of medicine, particularly psychiatry. Telepsychiatry programs are becoming very popular. At the same time, medical information sites are flourishing and evolving into a new health-care industry. Patient-physician information asymmetry is decreasing as patients are gaining easy access to medical information hitherto only available to professionals. Thus, psychiatry is facing another paradigm shift, at a time when most attention has been focused on managed care. In this new digital world, knowledge and information are no longer the sole property of professionals. Value will migrate from traditional in-person office-based therapy to digital clinical products, from in-person library search and classroom didactic instruction to interactive on-line searches and distance learning. In this time of value migration, psychiatrists have to determine what their 'distinctive competence' is and where best to add value in the health-care delivery value chain. The authors assess the impact of IT on clinical psychiatry and review how clinical practice, education and research in psychiatry are expected to change in this emerging digital world.

  8. Digital books.

    PubMed

    Wink, Diane M

    2011-01-01

    In this bimonthly series, the author examines how nurse educators can use the Internet and Web-based computer technologies such as search, communication, and collaborative writing tools; social networking and social bookmarking sites; virtual worlds; and Web-based teaching and learning programs. This article describes digital books.

  9. Digital Tidbits

    ERIC Educational Resources Information Center

    Kumaran, Maha; Geary, Joe

    2011-01-01

    Technology has transformed libraries. There are digital libraries, electronic collections, online databases and catalogs, ebooks, downloadable books, and much more. With free technology such as social websites, newspaper collections, downloadable online calendars, clocks and sticky notes, online scheduling, online document sharing, and online…

  10. Digital Badges

    ERIC Educational Resources Information Center

    Frederiksen, Linda

    2013-01-01

    Unlike so much of the current vocabulary in education and technology that seems to stir more confusion than clarity, most public service librarians may already have a general idea about digital badges. As visual representations of individual accomplishments, competencies or skills that are awarded by groups, institutions, or organizations, they…

  11. Fast robust non-sequential optical ray-tracing with implicit algebraic surfaces

    NASA Astrophysics Data System (ADS)

    Greynolds, Alan W.

    2015-09-01

    The fastest, most robust, general technique for non-sequentially ray-tracing a large class of imaging and non-imaging optical systems is by geometric modeling with algebraic (i.e. polynomial) implicit surfaces. The basic theory of these surfaces with special attention to optimizing their precise intersection with a ray (even at grazing incidence) is outlined for an admittedly limited software implementation. On a couple of "tame" examples, a 64-bit Windows 7 version is significantly faster than the fastest commercial design software (all multi-threaded). Non-sequential ray-surface interactions approaching 30M/sec are achieved on a 12-core 2.67 GHz Mac Pro desktop computer. For a more exotic example of a 6th degree Wood's horn beam dump (light trap), a 32-bit Windows single thread version traces rays nearly 4 times faster than the commercial ASAP software's implicit algebraic surface and over 13 times faster than its equivalent NURBS surface. However, implicit surfaces are foreign to most CAD systems and thus unfortunately, don't easily fit into a modern workflow.

  12. Scalability of a cross-platform multi-threaded non-sequential optical ray tracer

    NASA Astrophysics Data System (ADS)

    Greynolds, Alan W.

    2011-10-01

    The GelOE optical engineering software implements multi-threaded ray tracing with just a few simple cross-platform OpenMP directives. Timings as a function of the number of threads are presented for two quite different ZEMAX non-sequential sample problems running on a dual-boot 12-core Apple computer and compared to not only ZEMAX but also FRED (plus single-threaded ASAP and CodeV). Also discussed are the relative merits of using Mac OSX or Windows 7, 32-bit or 64-bit mode, single or double precision floats, and the Intel or GCC compilers. It is found that simple cross-platform multi-threading can be more efficient than the Windows-specific kind used in the commercial codes and who's the fastest ray tracer depends on the specific problem. Note that besides ray trace speed, overall productivity also depends on other things like visualization, ease-of-use, documentation, and technical support of which none are rated here.

  13. Simulation performance of a Sagnac loop terahertz asymmetric optical demultiplexer for OTDM systems

    NASA Astrophysics Data System (ADS)

    Pereira, Antonio A., Jr.; Martinez, Maria A. G.

    2003-08-01

    The aim of this work is to present a customized simulation tool for analysis and design of Sagnac loop TOAD's. Basically, we present a fast and versatile tool to emulate the behavior of some key design parameters like those found on non-linear elements, splitters, fiber delay line among others. After proper optimization, we use two different wavelengths for the control and signal hyperbolic secant pulses. Additionally, a band-pass filter is used to guarantee the transmission of signal pulses only. Furthermore, we analyze a bit to bit all optical demultiplexer, where one channel is extracted from a 64 bit frame at 10 Gbps transmission rate, and extend the implementation to work at 100 Gbps. SNR better than 22 dB are achieved with control pulse energy on the order of 200fJ and SOA bias current of 150 mA. A degradation of SNR of about 17 dB was verified for a variation of splitter coupling factor around 20%.

  14. Digital laser scanning fundus camera.

    PubMed

    Plesch, A; Klingbeil, U; Bille, J

    1987-04-15

    Imaging and documentation of the human retina for clinical diagnostics are conventionally achieved by classical optical methods. We designed a digital laser scanning fundus camera. The optoelectronical instrument is based on scanning laser illumination of the retina and a modified video imaging procedure. It is coupled to a digital image buffer and a microcomputer for image storage and processing. Aside from its high sensitivity the LSF incorporates new ophthalmic imaging methods like polarization differential contrast. We give design considerations as well as a description of the instrument and its performance.

  15. Digital Holography Display (2)

    NASA Astrophysics Data System (ADS)

    Lee, Cheok Peng; Asundi, A.; Yu, Yang; Xiao, Zhen Zhong

    This paper describes the extension work from the last Digital Holography Projector System. From the developed works shows that, some unforeseen factors have created the difficulties for the system alignment. Such factors are the DMD frame rate, light source and diffractive zero order. It is really the challenging development works to achieve the virtual 3D model display on the high speed rotation screen. The three most key factors are emphasizing: 1) The display device's frame rate; 2) The light source orientation angle; and 3) The zero order filtering optic. 1) This device's is the digital micro mirror, in short is DMD. It is the high speed switching device has developed by the most recent technology. The switching frame rate can go up as high as 291fps. At first, the 8 bits depth file must be digitalized and stored for DMD onboard Ram. The digitalized data are transmitting from the PC USB to DMD onboard Ram. Instead of the data are downloading directly from the PC to DVI or VGA during display, this downloading method cause slower down the display speed, which is the common frame rate of 30 Hz. Next, the onboard Ram data then transfer to the DMD mirror's for display, at the 8 bits 291 fps speed. At this frame rate, the display 2D image can almost cover for 10 of out of the 360 0 in 1 revolution. 2) This laser light source must be installed such that free for orientated in any arbitrary angle from 220 to 450. Which is normalized to the DMD mirrors and the brief sketch show on figure (a). The purpose of orientated the light source is ensure that multi diffractive order would be reflected straight from the mirrors. (This multi diffractive order is the phenomenon of the digital micro mirror's characteristic). This mean, the reconstruct images would be followed the DMD normalized direction reflected up to fibre conduit. Moreover, this orientated method install of the laser light source is making space for other optical lenses or device driver/controller. Because, all

  16. Optical modulation goes external

    NASA Astrophysics Data System (ADS)

    Loni, A.

    1995-02-01

    Digital or analog modulation of continuous-wave laser sources forms the basis of encoding and transmitting of information through optical fiber link systems. In digital systems, data are formatted in a simple periodic two-bit configuration, represented by high or low light intensities, whereas in analog systems data are represented by selective portions of a time-varying electronic waveform applied to the optical carrier. High speed optical communications and the distribution of cable television (CATV) signals are just two examples of digital and analog systems, respectively, that involve the transmission of data, voice and video over fiber networks. The basic layout of a fiber-optic link system is presented. The optical source wavelength is determined by the characteristics of the optical fiber. If the optical sources used is a semiconductor laser diode, information can be imprinted on the optical output by directly modulating the laser drive current with a radio frequency (RF) signal. In digital systems, the low (off) state generally corresponds to a position just below the lasing threshold on the characteristic intensity-current curve of the diode. This position is preferred to the zero current locus because the turn-on delays are then minimized. Analog systems require a bias current in addition to the threshold current in order to push the modulation into the linear region of the power-current curve. The main disadvantages associated with the direct modulation approach are discussed. The main disadvantage of the solid-state approach is its inability to modulate directly the laser at the data rates nominally entailed in optical communications. This inability causes further limitations associated with the inherently long excited state lifetime of the lasing species. External modulation overcomes this drawback by modulating the optical output from the laser rather than the material properties of the laser itself, and consequently, is set to play an increasingly

  17. A 96-channel FPGA-based time-to-digital converter

    SciTech Connect

    Bogdan, Mircea; Frisch, Henry; Heintz, Mary; Paramonov, Alexander; Sanders, Harold; Chappa, Steve; DeMaat, Robert; Klein, Rod; Miao, Ting; Phillips, Thomas J; Wilson, Peter

    2005-02-01

    We describe an FPGA-based, 96-channel, time-to-digital converter (TDC) intended for use with the Central Outer Tracker (COT) [1] in the CDF Experiment [2] at the Fermilab Tevatron. The COT system is digitized and read out by 315 TDC cards, each serving 96 wires of the chamber. The TDC is physically configured as a 9U VME card. The functionality is almost entirely programmed in firmware in two Altera Stratix FPGA’s. The special capabilities of this device are the availability of 840 MHz LVDS inputs, multiple phase-locked clock modules, and abundant memory. The TDC system operates with an input resolution of 1.2 ns, a minimum input pulse width of 4.8 ns and a minimum separation of 4.8 ns between pulses. Each input can accept up to 7 hits per collision. The time-to-digital conversion is done by first sampling each of the 96 inputs in 1.2-ns bins and filling a circular memory; the memory addresses of logical transitions (edges) in the input data are then translated into the time of arrival and width of the COT pulses. Memory pipelines with a depth of 5.5 μs allow deadtime-less operation in the first-level trigger; the data are multiple-buffered to diminish deadtime in the second-level trigger. The complete process of edge-detection and filling of buffers for readout takes 12 μs. The TDC VME interface allows a 64-bit Chain Block Transfer of multiple boards in a crate with transfer-rates up to 47 Mbytes/sec. The TDC also contains a separately-programmed data path that produces prompt trigger data every Tevatron crossing. The trigger bits are clocked onto the P3 VME backplane connector with a 22-ns clock for transmission to the trigger. The full TDC design and multi-card test results are described. The physical simplicity ensures low-maintenance; the functionality being in firmware allows reprogramming for other applications.

  18. [Digital radiography].

    PubMed

    Haendle, J

    1983-03-01

    Digital radiography is a generally accepted term comprising all x-ray image systems producing a projected image which resembles the conventional x-ray film image, and which are linked to any type of digital image processing. Fundamental criteria of differentiation are based on the production and detection method of the x-ray image. Various systems are employed, viz. the single-detector, line-detector or fanbeam detector and the area-beam or area-detector image converters, which differ from one another mainly in the manner of conversion of the radiation produced by the x-ray tube. The article also deals with the pros and cons of the various principles, the multitude of systems employed, and the varying frequency of their use in x-ray diagnosis work.

  19. Using digital imaging to assess spectral solar-optical properties of complex fenestration materials: A new approach in video-goniophotometry

    SciTech Connect

    Andersen, Marilyne; Stokes, Eleanor; Gayeski, Nicholas; Browne, Courtney

    2010-04-15

    A large variety of angularly selective fenestration systems have been developed in the past two decades and show great potential in improving visual comfort while reducing energy consumption, especially when combined with spectrally selective properties. Such systems include light-redirecting glazing, shading, film coatings, reflectors and others. To assess the potential of these systems accurately and reliably, one needs to be able to predict in detail how they modify the energy, direction and spectral make-up of solar radiation. For this assessment, spectral (wavelength-dependent) Bidirectional Transmission or Reflection Distribution Functions are used, usually referred to as BTDFs or BRDFs, or more generally BSDFs for Scattering Functions. To enable a faster, cheaper, and continuous investigation of these properties over most of the solar spectrum (400-1700 nm), an innovative goniospectrometric instrument has been created, relying on digital imaging, on light collection by an ellipsoidal half-transparent mirror, and on a filtering method in the visible range to generate spectral radiometric BSDFs. This so-called Heliodome instrument is described in this paper. It enables the performance of new fenestration technologies to be assessed in terms of lighting and solar gains management potential. The rotating table also serves as a heliodon, an architectural design tool for visualizing sunlight distribution inside a scale model and performing analyses on appropriate sun control strategies. The Heliodome's major innovations compared to other devices are to enable an analysis of both the visible and the near-infrared portions of the solar spectrum, to provide spectral as well as photometric light distribution data, and to ensure a continuous investigation of the transmitted or reflected light in a time-efficient way. (author)

  20. Digital Earth

    NASA Astrophysics Data System (ADS)

    de La Beaujardiere, J.

    2001-05-01

    Digital Earth (DE) seeks to make geospatial information broadly and easily available. Vast amounts of natural and cultural information are gathered about the Earth, but it is often difficult to find needed data, to share knowledge across disciplines, and to combine information from several sources. DE defines a framework for interoperability by selecting relevant open standards from the information technology community. These standards specify the technical means by which publishers can provide or sell their data, and by which client applications can find and access data in an automated fashion. The standardized DE framework enables many types of clients--from web browsers to museum kiosks to research-grade virtual environments--to use a common geospatial information infrastructure. Digital Earth can benefit Earth system education in general, and DLESE in particular, in several ways. First, educators, students and creators of instructional material will benefit from standardized access to georeferenced data. Secondly, educational lesson plans that focus on a region or aspect of the Earth can themselves be considered geospatial information resources that could be cataloged and retrieved through DE. Finally, general public knowledge about our planet will by increased by Digital Earth.

  1. Digital imaging technology assessment: Digital document storage project

    NASA Technical Reports Server (NTRS)

    1989-01-01

    An ongoing technical assessment and requirements definition project is examining the potential role of digital imaging technology at NASA's STI facility. The focus is on the basic components of imaging technology in today's marketplace as well as the components anticipated in the near future. Presented is a requirement specification for a prototype project, an initial examination of current image processing at the STI facility, and an initial summary of image processing projects at other sites. Operational imaging systems incorporate scanners, optical storage, high resolution monitors, processing nodes, magnetic storage, jukeboxes, specialized boards, optical character recognition gear, pixel addressable printers, communications, and complex software processes.

  2. Basics of Videodisc and Optical Disk Technology.

    ERIC Educational Resources Information Center

    Paris, Judith

    1983-01-01

    Outlines basic videodisc and optical disk technology describing both optical and capacitance videodisc technology. Optical disk technology is defined as a mass digital image and data storage device and briefly compared with other information storage media including magnetic tape and microforms. The future of videodisc and optical disk is…

  3. Optical Wavelet Transform for Fingerprint Identification

    DTIC Science & Technology

    1993-12-15

    requirements of digitized fingerprints. This research implements an optical wavelet transform of a fingerprint image, as the first step in an optical... wavelet transform is implemented with continuous shift using an optical correlation between binarized fingerprints written on a Magneto-Optic Spatial

  4. Digital data acquisition and processing.

    PubMed

    Naivar, Mark A; Galbraith, David W

    2015-01-05

    A flow cytometer is made up of many different subsystems that work together to measure the optical properties of individual cells within a sample. The data acquisition system (also called the data system) is one of these subsystems, and it is responsible for converting the electrical signals from the optical detectors into list-mode data. This unit describes the inner workings of the data system, and provides insight into how the instrument functions as a whole. Some of the information provided in this unit is applicable to everyday use of these instruments, and, at minimum, should make it easier for the reader to assemble a specific data system. With the considerable advancement of electronics technology, it becomes possible to build an entirely functional data system using inexpensive hobbyist-level electronics. This unit covers both analog and digital data systems, but the primary focus is on the more prevalent digital data systems of modern flow cytometric instrumentation.

  5. Scanning for Digitization Projects

    ERIC Educational Resources Information Center

    Wentzel, Larry

    2007-01-01

    Librarians and archivists find themselves facing the prospect of digitization. Everyone is doing it, everyone needs it. Discussions rage nationally and internationally concerning what to digitize and the best means to present and retain digital objects. Digitization is the act of making something digital, expressing a physical object "in numerical…

  6. A study of optical design and optimization of zoom optics with liquid lenses through modified genetic algorithm.

    PubMed

    Fang, Yi-Chin; Tsai, Cheng-Mu; Chung, Cheng-Lun

    2011-08-15

    A new concept for the optimization and optical design of miniature digital zoom optics with liquid lens elements is proposed in this research. The liquid lens elements are limited to the discrete configuration in order to obtain the optimal performance for digital zoom. We propose a newly developed digital zoom layout and optimization with a modified genetic algorism (GA) method, in order to meet the demands of a certain specification. The results show that we achieve a successful optical design and the optimization of the digital zoom optics with liquid optics, whose performance is greatly improved up to 48.68%, from the standpoint of on-axis spot size.

  7. Digital imaging applications in anatomic pathology.

    PubMed

    Leong, F Joel W-M; Leong, Anthony S-Y

    2003-03-01

    Digital imaging has progressed at a rapid rate and is likely to eventually replace chemical photography in most areas of professional and amateur digital image acquisition. In pathology, digital microscopy has implications beyond that of taking a photograph. The arguments for adopting this new medium are compelling, and given similar developments in other areas of pathology and radiologic imaging, acceptance of the digital medium should be viewed as a component of the technological evolution of the laboratory. A digital image may be stored, replicated, catalogued, employed for educational purposes, transmitted for further interpretation (telepathology), analyzed for salient features (medical vision/image analysis), or form part of a wider digital healthcare strategy. Despite advances in digital camera technology, good image acquisition still requires good microscope optics and the correct calibration of all system components, something which many neglect. The future of digital imaging in pathology is very promising and new applications in the fields of automated quantification and interpretation are likely to have profound long-term influence on the practice of anatomic pathology. This paper discusses the state of the art of digital imaging in anatomic pathology.

  8. Optical vortex beam based optical fan for high-precision optical measurements and optical switching.

    PubMed

    Zhou, Zhi-Yuan; Li, Yan; Ding, Dong-Sheng; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen

    2014-09-01

    The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high-precision optical measurements and high-capacity and high-speed optical communications. Here we show a method for the construction of a simple and robust scheme to rotate a light beam such as a fan, which is based on a combination of these two properties and using the thermal-dispersion and electro-optical effect of birefringent crystals. Using a computer-based digital image-processing technique, we determine the temperature and thermal-dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science, and optical communication networks.

  9. Wide-Dynamic-Range Analog-to-Digital Conversion for HFDF.

    DTIC Science & Technology

    1986-11-01

    FIELD GROUP SUB-GROUP High-frequency direction finder (HFDF), lasers , fiber optics, switches, a. ,~esed~cea~ ad .Ab4 digitization, noise/jammer...dynamic-range digitization of wideband HFDF data, using a synchronously driven laser /fiber-optic system. Development activity reported is in the areas...dynamic- range digitization of wideband HFDF data, using a synchronously driven laser /fiber-optic system. The background of the concept and previous work

  10. Applications of Non-Crystalline Materials — C. REAL TIME OPTICAL RECORDING ON THIN FILMS OF AMORPHOUS SEMICONDUCTORS

    NASA Astrophysics Data System (ADS)

    Mitkova, Maria

    The following sections are included: * Introduction * Amorphous Semiconductors as Optical Storage Medium * Principles and Results on Real-time Optical Recording * Digital optical recording * Digital optical recording due to ablation of the films by illumination with light * Digital optical recording due to coagulation of an island film * Digital optical recording due to phase transition * Digital optical recording due to photoinduced surface deposition of metallic silver * Principles of holographic recording * Recording and readout * Classification of the holograms * Diffraction efficiency * Results in holographic recording on chalcogenide glasses * Future Trends * Acknowledgments * References

  11. High-performance digital color video camera

    NASA Astrophysics Data System (ADS)

    Parulski, Kenneth A.; D'Luna, Lionel J.; Benamati, Brian L.; Shelley, Paul R.

    1992-01-01

    Typical one-chip color cameras use analog video processing circuits. An improved digital camera architecture has been developed using a dual-slope A/D conversion technique and two full-custom CMOS digital video processing integrated circuits, the color filter array (CFA) processor and the RGB postprocessor. The system used a 768 X 484 active element interline transfer CCD with a new field-staggered 3G color filter pattern and a lenslet overlay, which doubles the sensitivity of the camera. The industrial-quality digital camera design offers improved image quality, reliability, manufacturability, while meeting aggressive size, power, and cost constraints. The CFA processor digital VLSI chip includes color filter interpolation processing, an optical black clamp, defect correction, white balance, and gain control. The RGB postprocessor digital integrated circuit includes a color correction matrix, gamma correction, 2D edge enhancement, and circuits to control the black balance, lens aperture, and focus.

  12. High-performance digital color video camera

    NASA Astrophysics Data System (ADS)

    Parulski, Kenneth A.; Benamati, Brian L.; D'Luna, Lionel J.; Shelley, Paul R.

    1991-06-01

    Typical one-chip color cameras use analog video processing circuits. An improved digital camera architecture has been developed using a dual-slope A/D conversion technique, and two full custom CMOS digital video processing ICs, the 'CFA processor' and the 'RGB post- processor.' The system uses a 768 X 484 active element interline transfer CCD with a new 'field-staggered 3G' color filter pattern and a 'lenslet' overlay, which doubles the sensitivity of the camera. The digital camera design offers improved image quality, reliability, and manufacturability, while meeting aggressive size, power, and cost constraints. The CFA processor digital VLSI chip includes color filter interpolation processing, an optical black clamp, defect correction, white balance, and gain control. The RGB post-processor digital IC includes a color correction matrix, gamma correction, two-dimensional edge-enhancement, and circuits to control the black balance, lens aperture, and focus.

  13. Automatic segmentation of digital micrographs: a survey.

    PubMed

    Nattkemper, Tim W

    2004-01-01

    Digital micrographs and play a crucial role in today's bio-medical research. Due to progresses in experiment standardization and automation large sets of digital microscopy images, so called micrographs are recorded and stored to databases. The subsequent analysis of the large number of digital images needs the image information to be transformed into quantitative data, which can be processed by statistical methods and datamining. This article summarizes applications of optical microscopy in biomedical research and describes the individual characteristics in micrograph segmentation and classification. An overview on past works based on image processing and artificial neural networks is given and the problem of segmentation evaluation. It concludes with recommendations for future works.

  14. An Optically-Assisted 3-D Cellular Array Machine

    DTIC Science & Technology

    1993-11-05

    Presented by: Physical Optics Corporation 0 Research & Development Division 20600 Gramercy Place, Suite 103 Torrance, California 90501 Principal...Computer Machine (Constructed Hardware) (Planned Hardware Design) Processing Techniques Digital Only Digital and Analog Analog Processor N/A Celular Neural

  15. Systems and methods for free space optical communication

    DOEpatents

    Harper, Warren W [Benton City, WA; Aker, Pamela M [Richland, WA; Pratt, Richard M [Richland, WA

    2011-05-10

    Free space optical communication methods and systems, according to various aspects are described. The methods and systems are characterized by transmission of data through free space with a digitized optical signal acquired using wavelength modulation, and by discrimination between bit states in the digitized optical signal using a spectroscopic absorption feature of a chemical substance.

  16. Photonics meet digital art

    NASA Astrophysics Data System (ADS)

    Curticapean, Dan; Israel, Kai

    2014-09-01

    The paper focuses on the work of an interdisciplinary project between photonics and digital art. The result is a poster collection dedicated to the International Year of Light 2015. In addition, an internet platform was created that presents the project. It can be accessed at http://www.magic-of-light.org/iyl2015/index.htm. From the idea to the final realization, milestones with tasks and steps will be presented in the paper. As an interdisciplinary project, students from technological degree programs were involved as well as art program students. The 2015 Anniversaries: Alhazen (1015), De Caus (1615), Fresnel (1815), Maxwell (1865), Einstein (1905), Penzias Wilson, Kao (1965) and their milestone contributions in optics and photonics will be highlighted.

  17. Digital demodulator

    NASA Technical Reports Server (NTRS)

    Shull, T. A. (Inventor)

    1982-01-01

    A digital demodulator for converting pulse code modulated data from phase shift key (PSK) to non return to zero (NRZ) and to biphase data is described. The demodulator is composed of standard integrated logic circuits. The key to the demodulation function is a pair of cross coupled one shot multivibrators and which with a flip-flop produce the NRZ-L is all that is required, the circuitry is greatly simplified and the 2(v) times bit rate contraint can be removed from the carrier. A flip-flop, an OR gate, and AND gate and a binary counter generate the bit rate clock (BTCK) for the NRZ-L. The remainder of the circuitry is for converting the NRZ-L and BTCK into biphase data. The device was designed for use in the space shuttle bay environment measurements.

  18. Digital structural

    USGS Publications Warehouse

    Dohm, J.M.; Anderson, R.C.; Tanaka, K.L.

    1998-01-01

    Magmatic and tectonic activity have both contributed significantly to the surface geology of Mars. Digital structural mapping techniques have now been used to classify and date centers of tectonic activity in the western equatorial region. For example, our results show a center of tectonic activity at Valles Marineris, which may be associated with uplift caused by intrusion. Such evidence may help explain, in part, the development of the large troughs and associated outflow channels and chaotic terrain. We also find a local centre of tectonic activity near the source region of Warrego Valles. Here, we suggest that the valley system may have resulted largely from intrusive-related hydrothermal activity. We hope that this work, together with the current Mars Global Surveyor mission, will lead to a better understanding of the geological processes that shaped the Martian surface.

  19. Digital lattice gauge theories

    NASA Astrophysics Data System (ADS)

    Zohar, Erez; Farace, Alessandro; Reznik, Benni; Cirac, J. Ignacio

    2017-02-01

    We propose a general scheme for a digital construction of lattice gauge theories with dynamical fermions. In this method, the four-body interactions arising in models with 2 +1 dimensions and higher are obtained stroboscopically, through a sequence of two-body interactions with ancillary degrees of freedom. This yields stronger interactions than the ones obtained through perturbative methods, as typically done in previous proposals, and removes an important bottleneck in the road towards experimental realizations. The scheme applies to generic gauge theories with Lie or finite symmetry groups, both Abelian and non-Abelian. As a concrete example, we present the construction of a digital quantum simulator for a Z3 lattice gauge theory with dynamical fermionic matter in 2 +1 dimensions, using ultracold atoms in optical lattices, involving three atomic species, representing the matter, gauge, and auxiliary degrees of freedom, that are separated in three different layers. By moving the ancilla atoms with a proper sequence of steps, we show how we can obtain the desired evolution in a clean, controlled way.

  20. Tunable photonic filters: a digital signal processing design approach.

    PubMed

    Binh, Le Nguyen

    2009-05-20

    Digital signal processing techniques are used for synthesizing tunable optical filters with variable bandwidth and centered reference frequency including the tunability of the low-pass, high-pass, bandpass, and bandstop optical filters. Potential applications of such filters are discussed, and the design techniques and properties of recursive digital filters are outlined. The basic filter structures, namely, the first-order all-pole optical filter (FOAPOF) and the first-order all-zero optical filter (FOAZOF), are described, and finally the design process of tunable optical filters and the designs of the second-order Butterworth low-pass, high-pass, bandpass, and bandstop tunable optical filters are presented. Indeed, we identify that the all-zero and all-pole networks are equivalent with well known principles of optics of interference and resonance, respectively. It is thus very straightforward to implement tunable optical filters, which is a unique feature.

  1. The Profiles in Science Digital Library: Behind the Scenes.

    PubMed

    Gallagher, Marie E; Moffatt, Christie

    2012-01-01

    This demonstration shows the Profiles in Science® digital library. Profiles in Science contains digitized selections from the personal manuscript collections of prominent biomedical researchers, medical practitioners, and those fostering science and health. The Profiles in Science Web site is the delivery mechanism for content derived from the digital library system. The system is designed according to our basic principles for digital library development [1]. The digital library includes the rules and software used for digitizing items, creating and editing database records and performing quality control as well as serving the digital content to the public. Among the types of data managed by the digital library are detailed item-level, collection-level and cross-collection metadata, digitized photographs, papers, audio clips, movies, born-digital electronic files, optical character recognized (OCR) text, and annotations (see Figure 1). The digital library also tracks the status of each item, including digitization quality, sensitivity of content, and copyright. Only items satisfying all required criteria are released to the public through the World Wide Web. External factors have influenced all aspects of the digital library's infrastructure.

  2. Multimode interference coupler based photonic analog-to-digital conversion scheme.

    PubMed

    Shile, Wei; Jian, Wu; Lingjuan, Zhao; Chen, Yao; Chen, Ji; Dan, Lu; Xilin, Zhang; Zuoshan, Yin

    2012-09-01

    A novel phase-shifted optical quantization scheme for an all-optical analog-to-digital converter, which uses 4×4 multimode interference couplers, is demonstrated and theoretically analyzed. The whole scheme can be integrated on a chip.

  3. UC Davis Center for Digital Security

    DTIC Science & Technology

    2008-02-19

    currently valid OMB control number PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2 /6/08 2 . REPORT TYPE...Processing (page 1). 2 . Modeling Communication Losses and Interference in Fiber Optic Systems (page 9). 3. Low Detectability Optical Code-Division... 2 DTIC Data Purchase Request Number: FQ8671-0600473 BPN: F1ATA05258B473 Proposal Number: 04-NM-045 Research Title: UC DAVIS CENTER FOR DIGITAL

  4. On digital image processing technology and application in geometric measure

    NASA Astrophysics Data System (ADS)

    Yuan, Jiugen; Xing, Ruonan; Liao, Na

    2014-04-01

    Digital image processing technique is an emerging science that emerging with the development of semiconductor integrated circuit technology and computer science technology since the 1960s.The article introduces the digital image processing technique and principle during measuring compared with the traditional optical measurement method. It takes geometric measure as an example and introduced the development tendency of digital image processing technology from the perspective of technology application.

  5. The Optical Disc Roundup.

    ERIC Educational Resources Information Center

    Galbreath, Jeremy

    1993-01-01

    Provides an update on optical disk technology as a means of digital media storage and explains why it may become a standard storage technology for telemedia technology. Topics discussed include read-only formats; write-once formats, including WORM and CD-WORM; rewritable formats; videodiscs; and future possibilities. (LRW)

  6. Optical gyroscope

    NASA Astrophysics Data System (ADS)

    Seifollahi, Alireza

    It is said that future of the world is based on space exploration which leads us to think more about low cost and light weight instruments. Cheap and sensitive instruments should be de-signed and replace the expensive ones. One of the required instruments in space ships is gyroscope controls the direction of space ship. In this article I am going to give an idea to use optical properties in a new gyroscope which will be cheaper as well as more sensitive in com-pare with most of the being used normal gyroscope nowadays. This instrument uses an optical system to measure the angular changes in the direction of a space craft movements in any of the three axels. Any movement, even very small one, will move a crystal bulb which is lashed by some narrow elastic bands in a fixed box surrounded by three optical sources and light meters. Light meters measure the attitude and the angel of changes in the light beams going through the bulb which is related to the amount of changes in the space craft directions. The system will be very sensitive even against movement around its access. As an electro digital device in connection to a Main Process Unit (MPU) it can be used in Stability Augmentation System (SAS) in a space ship. The sensitivity rate of the instrument will be based on the quality and sensitivity of the light meters.

  7. Digital Sensor Technology

    SciTech Connect

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  8. High Temperature Strain Measurements Using Digital Optics

    DTIC Science & Technology

    1991-09-01

    Eae Melting and Boiling Temperatures for Several Metals ................ 3 2 Comparison of Micrometer and Camera Readings at Room Temperature...over-all accuracy. For materials at or near melting or ablation temperatures any contact with the test sample is an undesirable and often unacceptable... melting and boiling temperatures for several metals 3. In addition to high metals, carbon in the form of graphite sublimes at temperatures near 7000’F in

  9. Digital Image Processing in Private Industry.

    ERIC Educational Resources Information Center

    Moore, Connie

    1986-01-01

    Examines various types of private industry optical disk installations in terms of business requirements for digital image systems in five areas: records management; transaction processing; engineering/manufacturing; information distribution; and office automation. Approaches for implementing image systems are addressed as well as key success…

  10. Optic glioma

    MedlinePlus

    Glioma - optic; Optic nerve glioma; Juvenile pilocytic astrocytoma; Brain cancer - optic glioma ... Optic gliomas are rare. The cause of optic gliomas is unknown. Most optic gliomas are slow-growing ...

  11. Digital image processing of vascular angiograms

    NASA Technical Reports Server (NTRS)

    Selzer, R. H.; Beckenbach, E. S.; Blankenhorn, D. H.; Crawford, D. W.; Brooks, S. H.

    1975-01-01

    The paper discusses the estimation of the degree of atherosclerosis in the human femoral artery through the use of a digital image processing system for vascular angiograms. The film digitizer uses an electronic image dissector camera to scan the angiogram and convert the recorded optical density information into a numerical format. Another processing step involves locating the vessel edges from the digital image. The computer has been programmed to estimate vessel abnormality through a series of measurements, some derived primarily from the vessel edge information and others from optical density variations within the lumen shadow. These measurements are combined into an atherosclerosis index, which is found in a post-mortem study to correlate well with both visual and chemical estimates of atherosclerotic disease.

  12. Vibration analysis using digital correlation

    NASA Technical Reports Server (NTRS)

    Gilbert, John A.; Lehner, David L.; Dudderar, T. Dixon; Matthys, Donald R.

    1988-01-01

    This paper demonstrates the use of a computer-based optical method for locating the positions of nodes and antinodes in vibrating members. Structured light patterns are projected at an angle onto the vibrating surface using a 35 mm slide projector. The vibrating surface and the projected images are captured in a time averaged photograph which is subsequently digitized. The inherent fringe patterns are filtered to determine amplitudes of vibration, and computer programs are used to compare the time averaged images to images recorded prior to excitation to locate nodes and antinodes. Some of the influences of pattern regularity on digital correlation are demonstrated, and a speckle-based method for determining the mode shapes and the amplitudes of vibration with variable sensitivity is suggested.

  13. Role of magnesium and calcium in alcohol-induced hypertension and strokes as probed by in vivo television microscopy, digital image microscopy, optical spectroscopy, 31P-NMR, spectroscopy and a unique magnesium ion-selective electrode.

    PubMed

    Altura, B M; Altura, B T

    1994-10-01

    It is not known why alcohol ingestion poses a risk for development of hypertension, stroke and sudden death. Of all drugs, which result in body depletion of magnesium (Mg), alcohol is now known to be the most notorious cause of Mg-wasting. Recent data obtained through the use of biophysical (and noninvasive) technology suggest that alcohol may induce hypertension, stroke, and sudden death via its effects on intracellular free Mg2+ ([Mg2+]i), which in turn alter cellular and subcellular bioenergetics and promote calcium ion (Ca2+) overload. Evidence is reviewed that demonstrates that the dietary intake of Mg modulates the hypertensive actions of alcohol. Experiments with intact rats indicates that chronic ethanol ingestion results in both structural and hemodynamic alterations in the microcirculation, which, in themselves, could account for increased vascular resistance. Chronic ethanol increases the reactivity of intact microvessels to vasoconstrictors and results in decreased reactivity to vasodilators. Chronic ethanol ingestion clearly results in vascular smooth muscle cells that exhibit a progressive increase in exchangeable and cellular Ca2+ concomitant with a progressive reduction in Mg content. Use of 31P-NMR spectroscopy coupled with optical-backscatter reflectance spectroscopy revealed that acute ethanol administration to rats results in dose-dependent deficits in phosphocreatine (PCr), the [PCr]/[ATP] ratio, intracellular pH (pHi), oxyhemoglobin, and the mitochondrial level of oxidized cytochrome oxidase aa3 concomitant with a rise in brain-blood volume and inorganic phosphate. Temporal studies performed in vivo, on the intact brain, indicate that [Mg2+]i is depleted before any of the bioenergetic changes. Pretreatment of animals with Mg2+ prevents ethanol from inducing stroke and prevents all of the adverse bioenergetic changes from taking place. Use of quantitative digital imaging microscopy, and mag-fura-2, on single-cultured canine cerebral vascular

  14. Digital microscopy using phase-shifting digital holography with two reference waves.

    PubMed

    Guo, Pengyi; Devaney, Anthony J

    2004-04-15

    A lensless, coherent optical microscope is described that uses a version of phase-shifting digital holography (PSDH) in conjunction with a field backpropagation algorithm to form coherent images of transmission-type objects. The PSDH is implemented by use of only two reference waves, in contrast with the usual implementation that requires four quadrature phase-shifting reference waves. Therefore only two digital holograms need to be recorded, and the complexity of the microscopic system is reduced. Experimental results are presented that compare images generated from conventional Gabor digital holography, two-reference-wave PSDH, and conventional white-light microscopy.

  15. Optical HAAR Wavelet Transforms using Computer Generated Holography

    DTIC Science & Technology

    1992-12-17

    This research introduces an optical implementation of the continuous wavelet transform to filter images. The wavelet transform is modeled as a...continuous wavelet transform was performed and that the results compared favorably to digital simulation. Wavelets, Holography, Optical correlators.

  16. Multiple-Ring Digital Communication Network

    NASA Technical Reports Server (NTRS)

    Kirkham, Harold

    1992-01-01

    Optical-fiber digital communication network to support data-acquisition and control functions of electric-power-distribution networks. Optical-fiber links of communication network follow power-distribution routes. Since fiber crosses open power switches, communication network includes multiple interconnected loops with occasional spurs. At each intersection node is needed. Nodes of communication network include power-distribution substations and power-controlling units. In addition to serving data acquisition and control functions, each node acts as repeater, passing on messages to next node(s). Multiple-ring communication network operates on new AbNET protocol and features fiber-optic communication.

  17. Utilizing the Digital Fingerprint Methodology for Secure Key Generation

    DTIC Science & Technology

    2010-03-01

    FPGA Field Programmable Gate Array………………………….... 1 VHDL VHSIC Hardware Description Language………………….. 2 AES Advanced Encryption Standard...32 bits that are hard- coded into the VHDL and the other 32 bits come from the C code . It is not imperative that all 64 bits come from the C code ...together [22]. Another issue inherent in the VHDL code was discovered when glitch counts on all outputs were 1‟s. At this time, buffers were

  18. Digital x-ray imager

    SciTech Connect

    1998-06-18

    The global objective of this cooperation was to lower the cost and improve the quality of breast health care in the United States. We planned to achieve it by designing a very high performance digital radiography unit for breast surgical specimen radiography in the operating room. These technical goals needed to be achieved at reasonable manufacturing costs to enable MedOptics to achieve high market penetration at a profit. Responsibility for overall project execution rested with MedOptics. MedOptics fabricated and demonstrated hardware, and selected components and handled the overall integration. After completion of this CRADA, MedOptics worked with collaborators to demonstrate clinical performance and utility. Finally, the company marketed the device. LLNL convened a multi-directorate expert panel for an intensive review of MedOptics point design. A written brief of panel conclusions and recommendations was prepared. In addition, LLNL was responsible for: computationally simulating the effects of varying source voltage and filtering (predicting the required dynamic range for the detector); evaluating CsI:Tl, CdWO4 and scintillating glass as image converters; recommending image enhancement algorithms. The LLNL modeling results guided the design and experimental elements of the project. The Laboratory's unique array of sources and detectors was employed to resolve specific technical questions. Our image processing expertise was applied to the selection of enhancement tools for image display.

  19. Digital image processing.

    PubMed

    Seeram, Euclid

    2004-01-01

    Digital image processing is now commonplace in radiology, nuclear medicine and sonography. This article outlines underlying principles and concepts of digital image processing. After completing this article, readers should be able to: List the limitations of film-based imaging. Identify major components of a digital imaging system. Describe the history and application areas of digital image processing. Discuss image representation and the fundamentals of digital image processing. Outline digital image processing techniques and processing operations used in selected imaging modalities. Explain the basic concepts and visualization tools used in 3-D and virtual reality imaging. Recognize medical imaging informatics as a new area of specialization for radiologic technologists.

  20. Digital communications: Microwave applications

    NASA Astrophysics Data System (ADS)

    Feher, K.

    Transmission concepts and techniques of digital systems are presented; and practical state-of-the-art implementation of digital communications systems by line-of-sight microwaves is described. Particular consideration is given to statistical methods in digital transmission systems analysis, digital modulation methods, microwave amplifiers, system gain, m-ary and QAM microwave systems, correlative techniques and applications to digital radio systems, hybrid systems, digital microwave systems design, diversity and protection switching techniques, measurement techniques, and research and development trends and unsolved problems.

  1. Frequency analysis of digital holography

    NASA Astrophysics Data System (ADS)

    Kreis, Thomas M.

    2002-04-01

    A coherent optical imaging system consisting of recording a digital hologram by a CCD array and numerical reconstruction of the complex wave field in a computer is subjected to a frequency analysis. This analysis recognizes Fresnel and lensless Fourier transform holography; collimated and divergent reference waves; as well as the real image, the virtual image, and the dc term. The influences of finite sampling and the fill factor of the CCD pixels are examined. The impulse response of the system is a shifted Fraunhofer diffraction pattern of the aperture defined by the CCD. A fill factor below unity leads to a contrast decrease, which is quantitatively described in the modulation transfer function.

  2. Geometric phase shifting digital holography.

    PubMed

    Jackin, Boaz Jessie; Narayanamurthy, C S; Yatagai, Toyohiko

    2016-06-01

    A new phase shifting digital holographic technique using a purely geometric phase in Michelson interferometric geometry is proposed. The geometric phase in the system does not depend upon either optical path length or wavelength, unlike dynamic phase. The amount of geometric phase generated is controllable through a rotating wave plate. The new approach has unique features and major advantages in holographic measurement of transparent and reflecting three-dimensional (3D) objects. Experimental results on surface shape measurement and imaging of 3D objects are presented using the proposed method.

  3. Wideband optical storage

    NASA Technical Reports Server (NTRS)

    Heard, H. G.

    1979-01-01

    This paper has five purposes. First, to focus upon the key relationships that bound the technology choices for large, archival, digital storage devices; second, to identify the motivations for selecting the optical technology for a petabit-exabit level storage system (10 to the 15th to 10 to the 18th bits); third, to present a generic example and a specific implementation of a terabit-level optical storage device; fourth, to characterize the global design space constraints that will allow one to build a technology-limited optical store; and fifth, to sketch the outline of the BYTERON concept, a wideband 10 to the 16th to 10 to the 17th bit optical store concept and contrast its performance to that of an optical store that is in operation today

  4. Remote metrology by comparative digital holography

    SciTech Connect

    Baumbach, Torsten; Osten, Wolfgang; Kopylow, Christoph von; Jueptner, Werner

    2006-02-10

    A method for the remote comparison of objects with regard to their shape or response to a load is presented. The method allows interferometric sensitivity for comparing objects with different microstructure. In contrast to the well-known incoherent techniques based on inverse fringe projection this new approach uses the coherent optical wave field of the master object as a mask for the illumination of the sample object. The coherent mask is created by digital holography to allow instant access to the complete optical information of the master object at any place desired. The mask is reconstructed by a spatial light modulator (SLM). The optical reconstruction of digital holograms with SLM technology allows modification of reconstructed wavefronts with respect to improvement of image quality, the skilled introduction of additional information about the object (augmented reality), and the alignment of the master and test object.

  5. Uncertainty-managed phase-shifting digital holography.

    PubMed

    Hahn, Joonku; Kim, Hwi

    2012-11-01

    Phase-shifting digital holography is a digital measurement technology of a complex optical field profile that uses focal plane array detectors without the loss of bandwidth. It has been known that the accuracy of phase-shifting digital holography is limited mainly by the phase tolerance of reference. In this Letter, it is revealed that the uncertainty in an expected signal is highly dependent on the phase of the signal itself, as well as the phase tolerance of the reference. Based on the uncertainty analysis, we propose a novel scheme of phase-shifting digital holography that exploits an uncertainty property to enhance the measurement accuracy even under significant reference phase tolerance.

  6. Watermarking of three-dimensional objects by digital holography

    NASA Astrophysics Data System (ADS)

    Kishk, Sherif; Javidi, Bahram

    2003-02-01

    We present an optical method for information watermarking of three-dimensional (3D) objects by digital holography. A hidden image is embedded by double phase encoding in a phase-shift digital hologram of the 3D object. We decode the watermarked hologram to reconstruct the hidden image and the 3D object. We use either the entire hologram or a part of it to decode the hidden image. Experiments are presented to illustrate the ability to recover both the 3D object and the decoded hidden image. Digital holograms of the 3D object are obtained by optical experiments. The watermarking process, 3D object reconstruction, and hidden image recovery are performed digitally. To the best of our knowledge, this is the first report of 3D object watermarking by use of a phase encoding technique and digital holography.

  7. Research on measuring optical transfer function

    NASA Astrophysics Data System (ADS)

    Lu, Shaojun; Zhang, Xiaolin; Guo, Rongli; Xia, Dong; Yu, Jianming; Han, Jun

    2010-11-01

    Optical transfer function (OTF) of optical system is an important character to show optical system's imaging quality. It is important to accurately obtain the OTF in optical measurement. But traditional methods encountered some difficulties in high-precision measurement. A new approach based on digital image processing technique (DIP) is proposed in this paper. An experiment is done to acquire the image of a pill and a CCD is used to acquire digital images. Optical-electronic focal plane fixing technology is adopted to obtain a more accurate image. Then the images are done by digital image processing, including filtering and Fast Fourier Transform, and the 2-dimension modulated transfer function (MTF) is obtained. The MTF of this detected lens derived from this way is compared with a higher accurate equipment to measure the OTF of the same lens, the results have some differences. The reason is analyzed in this paper. This method will be widely used in optical inspection.

  8. Digital rectal exam

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007069.htm Digital rectal exam To use the sharing features on this page, please enable JavaScript. A digital rectal exam is an examination of the lower ...

  9. LaserData, Mnemos, and Other Data Disks: The Race to Store and Retrieve with Optics.

    ERIC Educational Resources Information Center

    Urrows, Henry; Urrows, Elizabeth

    1984-01-01

    Reports on the state of currently available digital storage and retrieval systems and describes in detail one-sided optical videodisc LaserData and the Mnemos system, which stores graphic images on microfiche discs. Video Patsearch, Matrox, Philips Megadoc, DEMAND, and Digital Recording Corporation's optical digital records and future videodisc…

  10. Parallel digital modem using multirate digital filter banks

    NASA Technical Reports Server (NTRS)

    Sadr, Ramin; Vaidyanathan, P. P.; Raphaeli, Dan; Hinedi, Sami

    1994-01-01

    A new class of architectures for an all-digital modem is presented in this report. This architecture, referred to as the parallel receiver (PRX), is based on employing multirate digital filter banks (DFB's) to demodulate, track, and detect the received symbol stream. The resulting architecture is derived, and specifications are outlined for designing the DFB for the PRX. The key feature of this approach is a lower processing rate then either the Nyquist rate or the symbol rate, without any degradation in the symbol error rate. Due to the freedom in choosing the processing rate, the designer is able to arbitrarily select and use digital components, independent of the speed of the integrated circuit technology. PRX architecture is particularly suited for high data rate applications, and due to the modular structure of the parallel signal path, expansion to even higher data rates is accommodated with each. Applications of the PRX would include gigabit satellite channels, multiple spacecraft, optical links, interactive cable-TV, telemedicine, code division multiple access (CDMA) communications, and others.

  11. Digital flight control research

    NASA Technical Reports Server (NTRS)

    Potter, J. E.; Stern, R. G.; Smith, T. B.; Sinha, P.

    1974-01-01

    The results of studies which were undertaken to contribute to the design of digital flight control systems, particularly for transport aircraft are presented. In addition to the overall design considerations for a digital flight control system, the following topics are discussed in detail: (1) aircraft attitude reference system design, (2) the digital computer configuration, (3) the design of a typical digital autopilot for transport aircraft, and (4) a hybrid flight simulator.

  12. TELEMETRY EQUIPMENT WITH DIGITAL READING,

    DTIC Science & Technology

    Contents: Basic peculiarities of telemetry equipment with digital reading ; Elements of pulse technology applied in telemetry equipment with digital... reading ; Digital reading systems; Telemetry systems with digital reading . (Author)

  13. Digital Ink and Notetaking

    ERIC Educational Resources Information Center

    Colwell, Kenneth E.

    2004-01-01

    Tablet PCs and graphics tablets employ digital ink technology. In this paper the author introduces the reader to digital ink technology with the aim of promoting its use in various instructional or training settings, with the goal of improving instructor-learner dialogue and student learning. The potential of digital ink for improved instructional…

  14. Digital Language Death

    PubMed Central

    Kornai, András

    2013-01-01

    Of the approximately 7,000 languages spoken today, some 2,500 are generally considered endangered. Here we argue that this consensus figure vastly underestimates the danger of digital language death, in that less than 5% of all languages can still ascend to the digital realm. We present evidence of a massive die-off caused by the digital divide. PMID:24167559

  15. Reconceptualising Critical Digital Literacy

    ERIC Educational Resources Information Center

    Pangrazio, Luciana

    2016-01-01

    While it has proved a useful concept during the past 20 years, the notion of "critical digital literacy" requires rethinking in light of the fast-changing nature of young people's digital practices. This paper contrasts long-established notions of "critical digital literacy" (based primarily around the critical consumption of…

  16. Digital Literacy. Research Brief

    ERIC Educational Resources Information Center

    Williamson, Ronald

    2011-01-01

    21st Century students need a complex set of skills to be successful in a digital environment. Digital literacy, similar to traditional definitions of literacy, is a set of skills students use to locate, organize, understand, evaluate and create information. The difference is that it occurs in an environment where a growing set of digital tools…

  17. Mass Digitization of Books

    ERIC Educational Resources Information Center

    Coyle, Karen

    2006-01-01

    Mass digitization of the bound volumes that we generally call "books" has begun, and, thanks to the interest in Google and all that it does, it is getting widespread media attention. The Open Content Alliance (OCA), a library initiative formed after Google announced its library book digitization project, has brought library digitization projects…

  18. Bridging the Digital Divide

    ERIC Educational Resources Information Center

    Clarke, Alan; Milner, Helen; Killer, Terry; Dixon, Genny

    2008-01-01

    As the Government publishes its action plan for consultation on digital inclusion, the authors consider some of the challenges and opportunities for the delivery of digital inclusion. Clarke argues that digital inclusion requires more than access to technology or the skills to use it effectively, it demands information and media literacy. Milner…

  19. Experimental research of digital holographic microscopic measuring

    NASA Astrophysics Data System (ADS)

    Zhu, Xueliang; Chen, Feifei; Li, Jicheng

    2013-06-01

    Digital holography is a new imaging technique, which is developed on the base of optical holography, Digital processing, and Computer techniques. It is using CCD instead of the conventional silver to record hologram, and then reproducing the 3D contour of the object by the way of computer simulation. Compared with the traditional optical holographic, the whole process is of simple measuring, lower production cost, faster the imaging speed, and with the advantages of non-contact real-time measurement. At present, it can be used in the fields of the morphology detection of tiny objects, micro deformation analysis, and biological cells shape measurement. It is one of the research hot spot at home and abroad. This paper introduced the basic principles and relevant theories about the optical holography and Digital holography, and researched the basic questions which influence the reproduce images in the process of recording and reconstructing of the digital holographic microcopy. In order to get a clear digital hologram, by analyzing the optical system structure, we discussed the recording distance and of the hologram. On the base of the theoretical studies, we established a measurement and analyzed the experimental conditions, then adjusted them to the system. To achieve a precise measurement of tiny object in three-dimension, we measured MEMS micro device for example, and obtained the reproduction three-dimensional contour, realized the three dimensional profile measurement of tiny object. According to the experiment results consider: analysis the reference factors between the zero-order term and a pair of twin-images by the choice of the object light and the reference light and the distance of the recording and reconstructing and the characteristics of reconstruction light on the measurement, the measurement errors were analyzed. The research result shows that the device owns certain reliability.

  20. Resource requirements for digital computations on electrooptical systems

    NASA Astrophysics Data System (ADS)

    Eshaghian, Mary M.; Panda, Dhabaleswar K.; Kumar, V. K. Prasanna

    1991-03-01

    The resource requirements of electrooptical organizations in performing digital computing tasks are studied via a generic model of parallel computation using optical interconnects, called the 'optical model of computation' (OMC). In this model, computation is performed in digital electronics and communication is performed using free space optics. Relationships between information transfer and computational resources in solving a given problem are derived. A computationally intensive operation, two-dimensional digital image convolution is undertaken. Irrespective of the input/output scheme and the order of computation, a lower bound of Omega(nw) is obtained on the optical volume required for convolving a w x w kernel with an n x n image, if the input bits are given to the system only once.