Science.gov

Sample records for 6dof parallel robot

  1. [Key technologies and implementation of the medical equipment road transportation simulation platform based on 6-DOF parallel robots].

    PubMed

    Pei, Yidong; Pei, Baoqing; Li, Hui; Fan, Yubo

    2013-01-01

    In view of the shortage of medical equipment road transportation simulation platform, we put forward a road transportation simulation method based on 6-DOF parallel robots. A 3D road spectrum model was built by the improvement of the harmonic superposition method. The simulation model was then compared with the standard model to verify its performance. Taking the road spectrum as the excitation, we could get the robot motion data to control the parallel robot through the S-shaped linear interpolation of the absolute position. It can simulate the movement of vehicles with different speed under various road conditions efficiently and accurately.

  2. Development of 6-DOF painting robot control system

    NASA Astrophysics Data System (ADS)

    Huang, Junbiao; Liu, Jianqun; Gao, Weiqiang

    2017-01-01

    With the development of society, the spraying technology of manufacturing industry in China has changed from the manual operation to the 6-DOF (Degree Of Freedom)robot automatic spraying. Spraying painting robot can not only complete the work which does harm to human being, but also improve the production efficiency and save labor costs. Control system is the most critical part of the 6-DOF robots, however, there is still a lack of relevant technology research in China. It is very necessary to study a kind of control system of 6-DOF spraying painting robots which is easy to operation, and has high efficiency and stable performance. With Googol controller platform, this paper develops programs based on Windows CE embedded systems to control the robot to finish the painting work. Software development is the core of the robot control system, including the direct teaching module, playback module, motion control module, setting module, man-machine interface, alarm module, log module, etc. All the development work of the entire software system has been completed, and it has been verified that the entire software works steady and efficient.

  3. Development of a 6DOF robotic motion phantom for radiation therapy

    PubMed Central

    Belcher, Andrew H.; Liu, Xinmin; Grelewicz, Zachary; Pearson, Erik; Wiersma, Rodney D.

    2014-01-01

    Purpose: The use of medical technology capable of tracking patient motion or positioning patients along 6 degree-of-freedom (6DOF) has steadily increased in the field of radiation therapy. However, due to the complex nature of tracking and performing 6DOF motion, it is critical that such technology is properly verified to be operating within specifications in order to ensure patient safety. In this study, a robotic motion phantom is presented that can be programmed to perform highly accurate motion along any X (left–right), Y (superior–inferior), Z (anterior–posterior), pitch (around X), roll (around Y), and yaw (around Z) axes. In addition, highly synchronized motion along all axes can be performed in order to simulate the dynamic motion of a tumor in 6D. The accuracy and reproducibility of this 6D motion were characterized. Methods: An in-house designed and built 6D robotic motion phantom was constructed following the Stewart–Gough parallel kinematics platform archetype. The device was controlled using an inverse kinematics formulation, and precise movements in all 6 degrees-of-freedom (X, Y, Z, pitch, roll, and yaw) were performed, both simultaneously and separately for each degree-of-freedom. Additionally, previously recorded 6D cranial and prostate motions were effectively executed. The robotic phantom movements were verified using a 15 fps 6D infrared marker tracking system and the measured trajectories were compared quantitatively to the intended input trajectories. The workspace, maximum 6D velocity, backlash, and weight load capabilities of the system were also established. Results: Evaluation of the 6D platform demonstrated translational root mean square error (RMSE) values of 0.14, 0.22, and 0.08 mm over 20 mm in X and Y and 10 mm in Z, respectively, and rotational RMSE values of 0.16°, 0.06°, and 0.08° over 10° of pitch, roll, and yaw, respectively. The robotic stage also effectively performed controlled 6D motions, as well as reproduced

  4. ADRC control of a 6-DOF parallel manipulator for telescope secondary mirror

    NASA Astrophysics Data System (ADS)

    Ye, Y.; Yue, Z.; Gu, B.

    2017-03-01

    In view of the special requirements of the secondary mirror control system on large aperture telescopes, an improved 6-DOF parallel manipulator is designed and used to replace the traditional hexapod used in telescope secondary mirror position dynamic compensation. A highly robust active disturbance rejection controller (ADRC) is designed, which consists of a nonlinear tracking differentiator (NTD), an extended state observer (ESO), a nonlinear state error feedback law (NLSEF), and disturbance compensation. The ESO can track the all-order state variables, as well as estimate and compensate for unmodeled dynamics and total external disturbance of the system. The results of simulation indicate that the ADRC can improve tracking precision and control performance when it is compared with the proportion integration differentiation (PID) controller. The test results show that the absolute accuracy of the three dimensional parallel motions is about ± 4 μm, and the two dimensional tilts' is about 10 μrad. The control precision meets the system design for a telescope secondary mirror.

  5. 6-DOF Pose Estimation of a Robotic Navigation Aid by Tracking Visual and Geometric Features.

    PubMed

    Ye, Cang; Hong, Soonhac; Tamjidi, Amirhossein

    2015-10-01

    This paper presents a 6-DOF Pose Estimation (PE) method for a Robotic Navigation Aid (RNA) for the visually impaired. The RNA uses a single 3D camera for PE and object detection. The proposed method processes the camera's intensity and range data to estimates the camera's egomotion that is then used by an Extended Kalman Filter (EKF) as the motion model to track a set of visual features for PE. A RANSAC process is employed in the EKF to identify inliers from the visual feature correspondences between two image frames. Only the inliers are used to update the EKF's state. The EKF integrates the egomotion into the camera's pose in the world coordinate system. To retain the EKF's consistency, the distance between the camera and the floor plane (extracted from the range data) is used by the EKF as the observation of the camera's z coordinate. Experimental results demonstrate that the proposed method results in accurate pose estimates for positioning the RNA in indoor environments. Based on the PE method, a wayfinding system is developed for localization of the RNA in a home environment. The system uses the estimated pose and the floorplan to locate the RNA user in the home environment and announces the points of interest and navigational commands to the user through a speech interface.

  6. 6-DOF Pose Estimation of a Robotic Navigation Aid by Tracking Visual and Geometric Features

    PubMed Central

    Ye, Cang; Hong, Soonhac; Tamjidi, Amirhossein

    2015-01-01

    This paper presents a 6-DOF Pose Estimation (PE) method for a Robotic Navigation Aid (RNA) for the visually impaired. The RNA uses a single 3D camera for PE and object detection. The proposed method processes the camera’s intensity and range data to estimates the camera’s egomotion that is then used by an Extended Kalman Filter (EKF) as the motion model to track a set of visual features for PE. A RANSAC process is employed in the EKF to identify inliers from the visual feature correspondences between two image frames. Only the inliers are used to update the EKF’s state. The EKF integrates the egomotion into the camera’s pose in the world coordinate system. To retain the EKF’s consistency, the distance between the camera and the floor plane (extracted from the range data) is used by the EKF as the observation of the camera’s z coordinate. Experimental results demonstrate that the proposed method results in accurate pose estimates for positioning the RNA in indoor environments. Based on the PE method, a wayfinding system is developed for localization of the RNA in a home environment. The system uses the estimated pose and the floorplan to locate the RNA user in the home environment and announces the points of interest and navigational commands to the user through a speech interface. Note to Practitioners This work was motivated by the limitations of the existing navigation technology for the visually impaired. Most of the existing methods use a point/line measurement sensor for indoor object detection. Therefore, they lack capability in detecting 3D objects and positioning a blind traveler. Stereovision has been used in recent research. However, it cannot provide reliable depth data for object detection. Also, it tends to produce a lower localization accuracy because its depth measurement error quadratically increases with the true distance. This paper suggests a new approach for navigating a blind traveler. The method uses a single 3D time

  7. Optimal design of a 3-leg 6-DOF parallel manipulator for a specific workspace

    NASA Astrophysics Data System (ADS)

    Fu, Jianxun; Gao, Feng

    2016-07-01

    Researchers seldom study optimum design of a six-degree-of-freedom(DOF) parallel manipulator with three legs based upon the given workspace. An optimal design method of a novel three-leg six-DOF parallel manipulator(TLPM) is presented. The mechanical structure of this robot is introduced, with this structure the kinematic constrain equations is decoupled. Analytical solutions of the forward kinematics are worked out, one configuration of this robot, including position and orientation of the end-effector are graphically displayed. Then, on the basis of several extreme positions of the kinematic performances, the task workspace is given. An algorithm of optimal designing is introduced to find the smallest dimensional parameters of the proposed robot. Examples illustrate the design results, and a design stability index is introduced, which ensures that the robot remains a safe distance from the boundary of sits actual workspace. Finally, one prototype of the robot is developed based on this method. This method can easily find appropriate kinematic parameters that can size a robot having the smallest workspace enclosing a predefined task workspace. It improves the design efficiency, ensures that the robot has a small mechanical size possesses a large given workspace volume, and meets the lightweight design requirements.

  8. Dynamics modeling and control of a 6-DOF space robot with flexible panels for capturing a free floating target

    NASA Astrophysics Data System (ADS)

    Yu, Zhang-wei; Liu, Xiao-feng; Cai, Guo-ping

    2016-11-01

    In many kinds of on-orbit space robot tasks, capturing free floating target using space robot attracts more attention of researchers. However, most existing researches about dynamics and control of space robot concern planar problem, and the effect of flexible panel on capturing dynamics of the system is not considered. In this paper, spatial dynamics and control of a 6-DOF space robot with flexible panels are investigated and spatial impact problem is considered. Dynamic model of the system is established by the single direction recursive construction method and the Jourdain's velocity variation principle. The Hertz contact and impact theory and the method of computer graphics are used to establish the impact model. The computed torque control method is used to design active controller to suppress the spacecraft drift caused by the impact. Numerical simulation results show that the established dynamic model is effective in describing the dynamics behavior of the space robot; flexible panels have big influence on impact dynamic characteristics; the designed controller may effectively control the spacecraft drift during the capture process.

  9. A redundant, 6-DOF parallel manipulator structure with improved workspace and dexterity

    SciTech Connect

    Stoughton, R.S.; Salerno, R.; Canfield, S.; Reinholtz, C.

    1994-08-01

    This paper presents a novel manipulator structure which combines two known parallel manipulator structures--a Stewart Platform (SP), and a double octahedral Variable Geometry Truss (VGT). The combined VGT + SP structure is redundant, using nine actuators to realize six-DOF motion. Combining the two structures allows the translational and orientational workspaces of the two individual structures to sum together to a much larger workspace than is generally achievable with parallel manipulator structures. In addition, the VGT portion of the structure allows the configuration of the Stewart Platform to be changed ``on the fly`` from one with a large workspace to one with high dexterity. A useful application of this structure is at the distal end of a truss-based manipulator, where it can serve as a dexterous wrist while preserving an internal passageway for cabling and/or conveyance systems.

  10. An Innovative 6-DOF Platform for Testing a Space Robotic System to Perform Contact Tasks in Zero-Gravity Environment

    DTIC Science & Technology

    2013-10-21

    adjustable from 0% to 100% compensation) in a full 3D or 6-DOF space, so that the tested object such as a satellite mockup attached to the platform...the gravity force (adjustable from 0% to 100% compensation) in a full 3D space, so that the tested object such as a satellite mockup in this case...satellite (hardware mockup ) free floating in the space, it has to provide a full 6-DOF maneuverability and be fully compensated for the weight of the

  11. Complex Tasks by Users With upper-extremity disability Using a 6-DOF Robotic Arm: A Study.

    PubMed

    Al-Halimi, Reem; Moussa, Medhat

    2016-08-26

    In this paper, we report on the results of a study that was conducted to examine how users suffering from severe upper-extremity disabilities can control a 6 Degrees of Freedom (DOF) robotics arm to complete complex activities of daily living. The focus of the study is not on assessing the robot arm but on examining the human-robot interaction patterns. Three participants were recruited. Each participant was asked to perform three tasks: eating three pieces of pre-cut bread from a plate, drinking three sips of soup from a bowl, and opening a right-handed door with lever handle. Each of these tasks was repeated three times. The arm was mounted on the participant's wheelchair, and the participants were free to move the arm as they wish to complete these tasks. Each task consisted of a sequence of modes where a mode is defined as arm movement in one DOF. Results show that participants used a total of 938 mode movements with an average of 75.5 (std 10.2) modes for the eating task, 70 (std 8.8) modes for the soup task, and 18.7 (std 4.5) modes for the door opening task. Tasks were then segmented into smaller subtasks. It was found that there are patterns of usage per participant and per subtask. These patterns can potentially allow a robot to learn from user's demonstration what is the task being executed and by whom and respond accordingly to reduce user effort.

  12. Use of a Force-Torque Sensor for Self-Calibration of a 6-DOF Medical Robot

    PubMed Central

    Joubair, Ahmed; Zhao, Long Fei; Bigras, Pascal; Bonev, Ilian A.

    2016-01-01

    The aim of this paper is to improve the position accuracy of a six degree of freedom medical robot. The improvement in accuracy is achieved without the use of any external measurement device. Instead, this work presents a novel calibration approach based on using an embedded force-torque sensor to identify the robot’s kinematic parameters and thereby enhance the positioning accuracy. A simulation study demonstrated that our calibration approach is effective, whether or not any measurement noise is present: the position error is improved, inside the robot target workspace, from 12 mm to 0.320 mm, for the maximum values, and from 9 mm to 0.2771 mm, for the mean errors. PMID:27258278

  13. Dynamic analysis of a 6 DOF CKCM robot end-effector for dual-arm telerobot systems

    NASA Technical Reports Server (NTRS)

    Nguyen, Charles C.; Pooran, Farhad J.

    1989-01-01

    A dynamical analysis is performed for a six DOF robot end-effector built to study telerobotic service and maintenance of NASA hardwares in space. The design of the end-effector is based on the concept of closed-kinematic chain mechanism capable of performing precise motion in a small workspace. After presenting a closed-form solution for the inverse kinematic problem, the Lagrangian approach is used to derive a set of equations of motion for the end-effector where the generalized coordinates are selected to be the Cartesian coordinates. A computer simulation study shows that the centrifugal and Coriolis terms can be neglected for slow motion.

  14. Adaptive optimization by 6 DOF robotic couch in prostate volumetric IMRT treatment: rototranslational shift and dosimetric consequences.

    PubMed

    Chiesa, Silvia; Placidi, Lorenzo; Azario, Luigi; Mattiucci, Gian Carlo; Greco, Francesca; Damiani, Andrea; Mantini, Giovanna; Frascino, Vincenzo; Piermattei, Angelo; Valentini, Vincenzo; Balducci, Mario

    2015-09-08

    The purpose of this study was to investigate the magnitude and dosimetric relevance of translational and rotational shifts on IGRT prostate volumetric-modulated arc therapy (VMAT) using Protura six degrees of freedom (DOF) Robotic Patient Positioning System. Patients with cT3aN0M0 prostate cancer, treated with VMAT simultaneous integrated boost (VMAT-SIB), were enrolled. PTV2 was obtained adding 0.7 cm margin to seminal vesicles base (CTV2), while PTV1 adding to prostate (CTV1) 0.7 cm margin in all directions, except 1.2 cm, as caudal margin. A daily CBCT was acquired before dose delivery. The translational and rotational displacements were corrected through Protura Robotic Couch, collected and applied to the simulation CT to obtain a translated CT (tCT) and a rototranslated CT (rtCT) on which we recalculated the initial treatment plan (TP). We analyzed the correlation between dosimetric coverage, organs at risk (OAR) sparing, and translational or rotational displacements. The dosimetric impact of a rototranslational correction was calculated. From October 2012 to September 2013, a total of 263 CBCT scans from 12 patients were collected. Translational shifts were < 5 mm in 81% of patients and the rotational shifts were < 2° in 93% of patient scans. The dosimetric analysis was performed on 172 CBCT scans and calculating 344 VMAT-TP. Two significant linear correlations were observed between yaw and the V20 femoral heads and between pitch rotation and V50 rectum (p < 0.001); rototranslational correction seems to impact more on PTV2 than on PTV1, especially when margins are reduced. Rotational errors are of dosimetric significance in sparing OAR and in target coverage. This is relevant for femoral heads and rectum because of major distance from isocenter, and for seminal vesicles because of irregular shape. No correlation was observed between translational and rotational errors. A study considering the intrafractional error and the deformable registration is ongoing.

  15. Developing a 6-DOF robot to investigate multi-axis ACL injuries under valgus loading coupled with tibia internal rotation.

    PubMed

    Ren, Yupeng; Jacobs, Benjamin J; Nuber, Gordon W; Koh, Jason L; Zhang, Li-Qun

    2010-01-01

    Anterior cruciate ligament (ACL) injuries have become more common in recent years as more young people participate in risky sporting activities [1]. Most ACL injuries occur as a result of noncontact mechanisms. Previous in vitro studies of ACL strain have found significant increases in ACL strain primarily with anterior directed force on the tibia relative to the femur and with internal rotation and often with valgus torque [2,3]. However, there remains significant controversy over the mechanisms of ACL failure and the forces on the knee that lead to injury. Some studies have also shown that isolated valgus loading may not load the ACL strongly. The goal of this study was to investigate the mechanism underlying valgus-related ACL injuries. An improved understanding of ACL failure may lead to improved ACL injury prevention programs. A novel 6 degrees of freedom (DOF) knee driving robot was developed in this study with a unique multi-axis simultaneous torque/position control. It was found that pure valgus torque caused a torque that internally rotated the tibia and thus increased ACL strain markedly, which may be an important mechanism underlying the rather common seemingly valgus-related ACL injuries.

  16. Design and Calibration of a New 6 DOF Haptic Device.

    PubMed

    Qin, Huanhuan; Song, Aiguo; Liu, Yuqing; Jiang, Guohua; Zhou, Bohe

    2015-12-11

    For many applications such as tele-operational robots and interactions with virtual environments, it is better to have performance with force feedback than without. Haptic devices are force reflecting interfaces. They can also track human hand positions simultaneously. A new 6 DOF (degree-of-freedom) haptic device was designed and calibrated in this study. It mainly contains a double parallel linkage, a rhombus linkage, a rotating mechanical structure and a grasping interface. Benefited from the unique design, it is a hybrid structure device with a large workspace and high output capability. Therefore, it is capable of multi-finger interactions. Moreover, with an adjustable base, operators can change different postures without interrupting haptic tasks. To investigate the performance regarding position tracking accuracy and static output forces, we conducted experiments on a three-dimensional electric sliding platform and a digital force gauge, respectively. Displacement errors and force errors are calculated and analyzed. To identify the capability and potential of the device, four application examples were programmed.

  17. Design and Calibration of a New 6 DOF Haptic Device

    PubMed Central

    Qin, Huanhuan; Song, Aiguo; Liu, Yuqing; Jiang, Guohua; Zhou, Bohe

    2015-01-01

    For many applications such as tele-operational robots and interactions with virtual environments, it is better to have performance with force feedback than without. Haptic devices are force reflecting interfaces. They can also track human hand positions simultaneously. A new 6 DOF (degree-of-freedom) haptic device was designed and calibrated in this study. It mainly contains a double parallel linkage, a rhombus linkage, a rotating mechanical structure and a grasping interface. Benefited from the unique design, it is a hybrid structure device with a large workspace and high output capability. Therefore, it is capable of multi-finger interactions. Moreover, with an adjustable base, operators can change different postures without interrupting haptic tasks. To investigate the performance regarding position tracking accuracy and static output forces, we conducted experiments on a three-dimensional electric sliding platform and a digital force gauge, respectively. Displacement errors and force errors are calculated and analyzed. To identify the capability and potential of the device, four application examples were programmed. PMID:26690449

  18. Parallel Architecture For Robotics Computation

    NASA Technical Reports Server (NTRS)

    Fijany, Amir; Bejczy, Antal K.

    1990-01-01

    Universal Real-Time Robotic Controller and Simulator (URRCS) is highly parallel computing architecture for control and simulation of robot motion. Result of extensive algorithmic study of different kinematic and dynamic computational problems arising in control and simulation of robot motion. Study led to development of class of efficient parallel algorithms for these problems. Represents algorithmically specialized architecture, in sense capable of exploiting common properties of this class of parallel algorithms. System with both MIMD and SIMD capabilities. Regarded as processor attached to bus of external host processor, as part of bus memory.

  19. Vibration analysis of cable-driven parallel robots based on the dynamic stiffness matrix method

    NASA Astrophysics Data System (ADS)

    Yuan, Han; Courteille, Eric; Gouttefarde, Marc; Hervé, Pierre-Elie

    2017-04-01

    This paper focuses on the vibration analysis of Cable-Driven Parallel Robots (CDPRs). An oscillating model of CDPRs able to capture the dynamic behavior of the cables is derived using Lagrangian approach in conjunction with the Dynamic Stiffness Matrix method. Then, an original approach to analyze the modal interaction between the local cable modes and the global CDPR modes is presented. To illustrate this approach, numerical investigations and experimental analyses are carried out on a large-dimension 6-DOF suspended CDPR driven by 8 cables.

  20. Compact 6-DOF Stage for Optical Adjustments

    NASA Technical Reports Server (NTRS)

    Shafaat, Syed; Chang, Daniel

    2008-01-01

    The figure depicts selected aspects of a six-degree-of-freedom (6-DOF) stage for mechanical adjustment of an optical component. The six degrees of freedom are translations along the Cartesian axes (x, y, and z) and rotations about these axes (theta x, theta y, and theta z, respectively). Relative to prior such stages, this stage offers advantages of compactness, stability, and robustness, plus other advantages as described below. The stage was designed specifically as part of a laser velocimeter and altimeter in which light reflected by a distant object is collected by a Cassegrainian telescope and focused into a single-mode, polarization-maintaining optical fiber. The stage is used to position and orient the input end of the optical fiber with respect to the focal point of the telescope. Stages like this one can also be adapted for use in positioning and orienting other optical components, including lenses, prisms, apertures, and photodetectors.

  1. Simulations of 6-DOF Motion with a Cartesian Method

    NASA Technical Reports Server (NTRS)

    Murman, Scott M.; Aftosmis, Michael J.; Berger, Marsha J.; Kwak, Dochan (Technical Monitor)

    2003-01-01

    Coupled 6-DOF/CFD trajectory predictions using an automated Cartesian method are demonstrated by simulating a GBU-32/JDAM store separating from an F-18C aircraft. Numerical simulations are performed at two Mach numbers near the sonic speed, and compared with flight-test telemetry and photographic-derived data. Simulation results obtained with a sequential-static series of flow solutions are contrasted with results using a time-dependent flow solver. Both numerical methods show good agreement with the flight-test data through the first half of the simulations. The sequential-static and time-dependent methods diverge over the last half of the trajectory prediction. after the store produces peak angular rates. A cost comparison for the Cartesian method is included, in terms of absolute cost and relative to computing uncoupled 6-DOF trajectories. A detailed description of the 6-DOF method, as well as a verification of its accuracy, is provided in an appendix.

  2. Parallel Robot for Lower Limb Rehabilitation Exercises

    PubMed Central

    Saadat, Mozafar; Borboni, Alberto

    2016-01-01

    The aim of this study is to investigate the capability of a 6-DoF parallel robot to perform various rehabilitation exercises. The foot trajectories of twenty healthy participants have been measured by a Vicon system during the performing of four different exercises. Based on the kinematics and dynamics of a parallel robot, a MATLAB program was developed in order to calculate the length of the actuators, the actuators' forces, workspace, and singularity locus of the robot during the performing of the exercises. The calculated length of the actuators and the actuators' forces were used by motion analysis in SolidWorks in order to simulate different foot trajectories by the CAD model of the robot. A physical parallel robot prototype was built in order to simulate and execute the foot trajectories of the participants. Kinect camera was used to track the motion of the leg's model placed on the robot. The results demonstrate the robot's capability to perform a full range of various rehabilitation exercises. PMID:27799727

  3. Parallel Robot for Lower Limb Rehabilitation Exercises.

    PubMed

    Rastegarpanah, Alireza; Saadat, Mozafar; Borboni, Alberto

    2016-01-01

    The aim of this study is to investigate the capability of a 6-DoF parallel robot to perform various rehabilitation exercises. The foot trajectories of twenty healthy participants have been measured by a Vicon system during the performing of four different exercises. Based on the kinematics and dynamics of a parallel robot, a MATLAB program was developed in order to calculate the length of the actuators, the actuators' forces, workspace, and singularity locus of the robot during the performing of the exercises. The calculated length of the actuators and the actuators' forces were used by motion analysis in SolidWorks in order to simulate different foot trajectories by the CAD model of the robot. A physical parallel robot prototype was built in order to simulate and execute the foot trajectories of the participants. Kinect camera was used to track the motion of the leg's model placed on the robot. The results demonstrate the robot's capability to perform a full range of various rehabilitation exercises.

  4. Calibration of the Aronson 6-DOF robotic platform

    NASA Technical Reports Server (NTRS)

    Lin, Amy Y.

    1991-01-01

    A discussion is presented of the calibration of the Aronson six-degree-of-freedom platform. Absolute encoders are used to determine the starting positions of all six joints. The hardware implemented are described in detail. Software programs are used to calibrate the hardware and to build the look-up tables that are needed in determining the initial joint positions. The descriptions of all software routines used are given.

  5. Controller strategy for a 6 DOF piezoelectric translation stage

    SciTech Connect

    Buice, E S; Yang, H; Smith, S T; Hocken, R J; Trumper, D L; Otten, D; Seugling, R M

    2006-03-22

    A controller for the third generation, 6 degree-of-freedom (DOF) piezoelectric translation stage shown in Figure 1 is presented. This was tested by monitoring all six coordinate motions using an orthogonal array of six, high-resolution capacitance gages. The full 6 DOF matrix transformations and controller block diagrams for this system have been measured and the system operated under closed loop control. Results of early experiments to determine the 21 open loop response functions as well as preliminary results showing the closed loop response for the 3 linear translations are presented in this abstract. The ultimate goal of this project is to incorporate this 6 DOF stage within a long range X-Y scanning system for nanometer pick-and-place capability over an area of 50 x 50 mm. The control strategy and early results from this system will be presented.

  6. A composite control scheme for 6DOF spacecraft formation control

    NASA Astrophysics Data System (ADS)

    Sun, Haibin; Li, Shihua; Fei, Shumin

    2011-09-01

    In this paper, a 6DOF spacecraft formation control problem is investigated via a composite control method, which consists of a feedback control law based on a finite time control technique and a feedforward compensator based on a nonlinear disturbance observer technique. The composite controller can guarantee that the closed-loop error system is globally asymptotically stable with respect to a set of two equilibria, that is, the 6DOF spacecraft can reach the desired formation. Simulation results are provided to demonstrate the effectiveness of the proposed method. The results show that the control performance of the proposed method in terms of both stabilization and disturbance rejection are considerably better than the traditional method.

  7. Construction and demonstration of a 9-string 6 DOF force reflecting joystick for telerobotics

    NASA Technical Reports Server (NTRS)

    Lindemann, Randel; Tesar, Delbert

    1989-01-01

    Confrontation with difficult manipulation tasks in hostile environments such as space, has led to the development of means to transport the human's senses, skills and cognition to the remote site. The use of advanced Telerobotics to achieve this goal is examined. A novel and universal hand controller based on a fully parallel mechanical architecture is discussed. The design and implementation of this 6 DOF force reflecting joystick is shown in relationship to the general philosophy of achieving telepresence in a man-machine system.

  8. Database Driven 6-DOF Trajectory Simulation for Debris Transport Analysis

    NASA Technical Reports Server (NTRS)

    West, Jeff

    2008-01-01

    Debris mitigation and risk assessment have been carried out by NASA and its contractors supporting Space Shuttle Return-To-Flight (RTF). As a part of this assessment, analysis of transport potential for debris that may be liberated from the vehicle or from pad facilities prior to tower clear (Lift-Off Debris) is being performed by MSFC. This class of debris includes plume driven and wind driven sources for which lift as well as drag are critical for the determination of the debris trajectory. As a result, NASA MSFC has a need for a debris transport or trajectory simulation that supports the computation of lift effect in addition to drag without the computational expense of fully coupled CFD with 6-DOF. A database driven 6-DOF simulation that uses aerodynamic force and moment coefficients for the debris shape that are interpolated from a database has been developed to meet this need. The design, implementation, and verification of the database driven six degree of freedom (6-DOF) simulation addition to the Lift-Off Debris Transport Analysis (LODTA) software are discussed in this paper.

  9. A 6DOF mathematical model of parachute in Mars EDL

    NASA Astrophysics Data System (ADS)

    Shen, Ganghui; Xia, Yuanqing; Sun, Haoran

    2015-04-01

    The base of the dynamics characteristic research on the parachute and vehicle system is to establish a dynamics model, during the parachute descent phase, which can accurately display the relationship among the velocity, altitude and attitude angles as well as the variation of time. This paper starts with a new tracking law - ADRC in Mars entry guidance, which affects the initial states of the parachute deployment point and determines precision landing capability. Then, the influence of unsteady resistance to the parachute in Martian air is considered as the added mass, and a 6DOF nonlinear mathematical model of the parachute and vehicle system is established.

  10. Numerical Investigation of Swimmer's Gliding Stage with 6-DOF Movement.

    PubMed

    Li, Tianzeng; Cai, Wenhao; Zhan, Jiemin

    2017-01-01

    The purpose of this study is to analyze the motion status of swimmers during their gliding stage using a numerical simulation method. This simulation strategy is conducted by solving the 3D incompressible Navier-Stokes equations using the Realizable k-ε turbulence closure equations in combination with the Six Degrees of Freedom (6-DOF) method. The uneven mass distribution of a swimmer and the roughness of the surface of the body are taken into consideration. The hydrodynamic characteristics and movement characteristics of the swimmers at different launch speeds were analyzed. The calculated results suggest that an optimal instant for starting propulsive movement is when the velocity of the swimmer decreases by 1.75 m/s to 2.0 m/s from an initial horizontal velocity of 3.1 m/s to 3.5 m/s.

  11. A 6-DOF vibration isolation system for hydraulic hybrid vehicles

    NASA Astrophysics Data System (ADS)

    Nguyen, The; Elahinia, Mohammad; Olson, Walter W.; Fontaine, Paul

    2006-03-01

    This paper presents the results of vibration isolation analysis for the pump/motor component of hydraulic hybrid vehicles (HHVs). The HHVs are designed to combine gasoline/diesel engine and hydraulic power in order to improve the fuel efficiency and reduce the pollution. Electric hybrid technology is being applied to passenger cars with small and medium engines to improve the fuel economy. However, for heavy duty vehicles such as large SUVs, trucks, and buses, which require more power, the hydraulic hybridization is a more efficient choice. In function, the hydraulic hybrid subsystem improves the fuel efficiency of the vehicle by recovering some of the energy that is otherwise wasted in friction brakes. Since the operation of the main component of HHVs involves with rotating parts and moving fluid, noise and vibration are an issue that affects both passengers (ride comfort) as well as surrounding people (drive-by noise). This study looks into the possibility of reducing the transmitted noise and vibration from the hydraulic subsystem to the vehicle's chassis by using magnetorheological (MR) fluid mounts. To this end, the hydraulic subsystem is modeled as a six degree of freedom (6-DOF) rigid body. A 6-DOF isolation system, consisting of five mounts connected to the pump/motor at five different locations, is modeled and simulated. The mounts are designed by combining regular elastomer components with MR fluids. In the simulation, the real loading and working conditions of the hydraulic subsystem are considered and the effects of both shock and vibration are analyzed. The transmissibility of the isolation system is monitored in a wide range of frequencies. The geometry of the isolation system is considered in order to sustain the weight of the hydraulic system without affecting the design of the chassis and the effectiveness of the vibration isolating ability. The simulation results shows reduction in the transmitted vibration force for different working cycles of

  12. Dynamic stiffness model of spherical parallel robots

    NASA Astrophysics Data System (ADS)

    Cammarata, Alessandro; Caliò, Ivo; D`Urso, Domenico; Greco, Annalisa; Lacagnina, Michele; Fichera, Gabriele

    2016-12-01

    A novel approach to study the elastodynamics of Spherical Parallel Robots is described through an exact dynamic model. Timoshenko arches are used to simulate flexible curved links while the base and mobile platforms are modelled as rigid bodies. Spatial joints are inherently included into the model without Lagrangian multipliers. At first, the equivalent dynamic stiffness matrix of each leg, made up of curved links joined by spatial joints, is derived; then these matrices are assembled to obtain the Global Dynamic Stiffness Matrix of the robot at a given pose. Actuator stiffness is also included into the model to verify its influence on vibrations and modes. The latter are found by applying the Wittrick-Williams algorithm. Finally, numerical simulations and direct comparison to commercial FE results are used to validate the proposed model.

  13. Adding Liquid Payloads Effects to the 6-DOF Trajectory of Spinning Projectiles

    DTIC Science & Technology

    2010-03-01

    Adding Liquid Payloads Effects to the 6-DOF Trajectory of Spinning Projectiles by Gene R. Cooper ARL-TR-5118 March 2010...Liquid Payloads Effects to the 6-DOF Trajectory of Spinning Projectiles Gene R. Cooper Weapons and Materials Research Directorate, ARL...September 2007 4. TITLE AND SUBTITLE Adding Liquid Payloads Effects to the 6-DOF Trajectory of Spinning Projectiles 5a. CONTRACT NUMBER 5b. GRANT

  14. A Parallel Wire Robot for Epicardial Interventions

    PubMed Central

    Costanza, Adam D.; Wood, Nathan A.; Passineau, Michael J.; Moraca, Robert J.; Bailey, Stephen H.; Yoshizumi, Tomo; Riviere, Cameron N.

    2015-01-01

    This paper describes the design and preliminary testing of a planar parallel wire robot that adheres to the surface of the beating heart and provides a stable platform for minimally invasive epicardial therapies. The device is deployed through a small subxiphoid skin incision and attaches to the heart using suction. This methodology obviates mechanical stabilization and lung deflation, which are typically required during minimally invasive beating-heart surgery. The prototype design involves three vacuum chambers connected by two flexible arms. The chambers adhere to the epicardium, forming the vertices of a triangular base structure. Three cables connect a movable end-effector head to the three bases; the cables then pass out of the body to external actuators. The surgical tool moves within the triangular workspace to perform injections, ablation, or other tasks on the beating heart. Tests in vitro and in vivo were conducted to demonstrate the capabilities of the system. Tests in vivo successfully demonstrated the ability to deploy through a subxiphoid incision, adhere to the surface of the beating heart, move the surgical tool head within the robot’s workspace, and perform injections into the myocardium. PMID:25571402

  15. PARASURG hybrid parallel robot for minimally invasive surgery.

    PubMed

    Pisla, D; Gherman, B; Plitea, N; Gyurka, B; Vaida, C; Vlad, L; Graur, F; Radu, C; Suciu, M; Szilaghi, A; Stoica, A

    2011-01-01

    This paper presents the parallel hybrid robot, PARASURG 9M, for robotically assisted surgery, a robot which was entirely designed and produced in Romania. It is a versatile robot, being composed of a positioning and orientation module, PARASURG 5M with five degrees of freedom, having the possibility of attaching at its end either a laparoscope or an active surgical instrument for cutting/grasping, PARASIM, with four degrees of freedom. Based on its mathematical modelling, the first low-cost experimental model of the surgical robot has been built. The robot is part of the surgical robotic system, PARAMIS, with three arms, one used as a laparoscope holder, and other two for manipulating active instruments. When it is used as a manipulator of the camera, the user has the possibility to give commands in a large area for the positioning of the laparoscope using different interfaces: joystick, microphone, keyboard & mouse and haptic device. If the active surgical instrument, PARASIM, is attached, the robot commands are given through a haptic device. The main features that make the PARASURG 9M surgical robot suited for minimally invasive surgery are: precision, the elimination of the natural tremor of the surgeon, direct control over a smooth, precise, stable view of the internal surgical field for the surgeon. It also eliminates the need of a second surgeon to be present for the entire procedure (in the case of using the robot as a camera holder). In addition, there is improvement of surgeon dexterity in the case of using the PARASIM active instrument and better ergonomics in using the robot (in the case of the classic laparoscopy, the surgeon must adopt a difficult position for a long period of time, while the robot never gets tired). Having a relatively easy to understand, intuitive commanding system, the surgeons can rapidly adapt to the use of the PARASURG 9M robot in surgical procedures.

  16. Linear quadratic optimal controller for cable-driven parallel robots

    NASA Astrophysics Data System (ADS)

    Abdolshah, Saeed; Shojaei Barjuei, Erfan

    2015-12-01

    In recent years, various cable-driven parallel robots have been investigated for their advantages, such as low structural weight, high acceleration, and large work-space, over serial and conventional parallel systems. However, the use of cables lowers the stiffness of these robots, which in turn may decrease motion accuracy. A linear quadratic (LQ) optimal controller can provide all the states of a system for the feedback, such as position and velocity. Thus, the application of such an optimal controller in cable-driven parallel robots can result in more efficient and accurate motion compared to the performance of classical controllers such as the proportional- integral-derivative controller. This paper presents an approach to apply the LQ optimal controller on cable-driven parallel robots. To employ the optimal control theory, the static and dynamic modeling of a 3-DOF planar cable-driven parallel robot (Feriba-3) is developed. The synthesis of the LQ optimal control is described, and the significant experimental results are presented and discussed.

  17. Super Strypi HWIL 6DOF (Hardware-In-Loop six-degree-of-freedom) Rev. 2175

    SciTech Connect

    Gilkey, Jeff C.; Harl, Nathan R.; Kowalchuk, Scott A.

    2016-02-23

    The Super Strypi HWIL is a six degree-of-freedom (6DOF) simulation for the Super Strypi Launch Vehicle. The simulation is used to test the NGC flight software including the navigation software. Aerodynamic and propulsive forces, mass properties, ACS (attitude control system) parameters are defined in input files. Output parameters are saved to a Matlab mat file.

  18. Stable visual PID control of a planar parallel robot

    NASA Astrophysics Data System (ADS)

    Garrido Moctezuma, Ruben; Soria López, Alberto; Trujano Cabrera, Miguel

    2008-11-01

    In this paper, we study an image-based PID control of a redundant planar parallel robot using a fixed camera configuration. The control objective is to move the robot end effector to the desired image reference position. The control law has a PD term plus an integral term with a nonlinear function of the position error. The proportional and integral actions use image loop information whereas the derivative action adds task space damping using joint level measurements. The Lyapunov method and the LaSalle invariance principle allow assessing asymptotic closed loop stability. Experiments show the feasibility of the proposed approach.

  19. Neural Network Identification For a C5 Parallel Robot

    SciTech Connect

    Daachi, M. E.; Chikouche, D.; Achili, B.; Daachi, B.

    2008-06-12

    This paper presents the design and analysis of a neural network-based identification of the inverse dynamic model of a C5 parallel robot. The identification structure is designed using the black box form (the dynamic model is completely unknown). This identification uses real data acquired on the C5 parallel robot by applying a nominal control scheme (PD). The desired trajectories of this scheme are based on Fourier series and the coefficients are chosen in a heuristic way. We have used this type of desired trajectories to obtain exciting trajectories for identification procedure. Three identification schemes are tested and compared. The comparison is performed based on the number of parameters used in each architecture and the quality of the generalization error. The used neural network is of MLP type and composed of one hidden layer.

  20. Super Strypi SWIL 6DOF (Software-In-Loop six-degree-of-freedom) Rev. 2175

    SciTech Connect

    Anderson, Mark A.; Bigelow, Matthew; Gilkey, Jeff C.; Harl, Nathan R.; Hutchinson, Lance V.; Kowalchuk, Scott A.; Madsen, Jared D.; Meindl, Mark A.; Outka, David E.; Schrempp, Mark T.

    2016-03-03

    The Super Strypi SWIL is a six degree-of-freedom (6DOF) simulation for the Super Strypi Launch Vehicle that includes a subset of the Super Strypi NGC software (guidance, ACS and sequencer). Aerodynamic and propulsive forces, mass properties, ACS (attitude control system) parameters, guidance parameters and Monte-Carlo parameters are defined in input files. Output parameters are saved to a Matlab mat file.

  1. The Integrated Simulation Analysis on 6-DOF Electrohydraulic Servo-Control Parallel Platform

    NASA Astrophysics Data System (ADS)

    Lin, Cheng; Ren, Liangcheng

    The unmatched characteristics between dissymmetry hydraulic cylinder and symmetry servo valve while building the model were analyzed. And the simulation analysis adopting dynamic pressure feedback controlling method were proceeded. The unmatched problem has been solved well. The integration simulation study of test bed upon step-input function and sine movement associating with the tri-system of mechanics, hydraulics and control, as well as the static and dynamic control system performance were described in this article.

  2. Validation of a new computational 6-DOF knee simulator during dynamic activities.

    PubMed

    Fitzpatrick, Clare K; Maag, Chase; Clary, Chadd W; Metcalfe, Amber; Langhorn, Jason; Rullkoetter, Paul J

    2016-10-03

    A new six-degree-of-freedom (6-DOF) joint simulator has recently been developed which facilitates testing of implants under more realistic loading conditions than has been possible previously. However, typical wear testing can be very time-consuming, taking weeks or months to complete. A validated computational model is an ideal complement to these types of long-running tests. In this study, a computational counterpart to the new 6-DOF joint simulator was developed and validated. Total knee replacement components were evaluated in both physical and computational simulations, and joint mechanics were compared between the experiment and the model. Kinematic comparisons were carried out for two total knee replacement designs, under loading conditions representative of three different activities of daily living: deep knee bend, gait, and stepdown. The model accurately reproduced the motions obtained in the physical simulator, and appropriately differentiated between activities and between implant designs. Root-mean-square differences in anterior-posterior translations and internal-external rotations were less than 1.7mm and 1.4°, respectively, for both implant designs and all three dynamic activities. Contact area, and peak and average contact pressure predicted by the model matched experimental measurements with a root-mean-square accuracy of 20mm(2), 9MPa, and 1MPa, respectively. The computational model of the 6-DOF joint simulator will be a key tool in efficient evaluation of implant mechanics under loading conditions representative of the in vivo environment. These simulations may be used directly in comparison of devices, or may aid in facilitating optimal usage of the physical simulator through determining which activities and/or loading conditions best address specific clinical or design issues, for example, development of worst-case loading profiles for wear testing.

  3. A multibody approach for 6-DOF flight dynamics and stability analysis of the hawkmoth Manduca sexta.

    PubMed

    Kim, Joong-Kwan; Han, Jae-Hung

    2014-03-01

    This paper investigates the six degrees of freedom (6-DOF) flight dynamics and stability of the hawkmoth Manduca sexta using a multibody dynamics approach that encompasses the effects of the time varying inertia tensor of all the body segments including two wings. The quasi-steady translational and unsteady rotational aerodynamics of the flapping wings are modeled with the blade element theory with aerodynamic coefficients derived from relevant experimental studies. The aerodynamics is given instantaneously at each integration time step without wingbeat-cycle-averaging. With the multibody dynamic model and the aerodynamic model for the hawkmoth, a direct time integration of the fully coupled 6-DOF nonlinear multibody dynamics equations of motion is performed. First, the passive damping magnitude of each single DOF is quantitatively examined with the measure of the time taken to half the initial velocity (thalf). The results show that the sideslip translation is less damped approximately three times than the other two translational DOFs, and the pitch rotation is less damped approximately five times than the other two rotational DOFs; each DOF has the value of (unit in wingbeat strokes): thalf,forward/backward = 7.10, thalf,sideslip = 17.95, thalf,ascending = 7.13, thalf,descending = 5.77, thalf,roll = 0.68, thalf,pitch = 2.39, and thalf,yaw = 0.25. Second, the natural modes of motion, with the hovering flight as a reference equilibrium condition, are examined by analyzing fully coupled 6-DOF dynamic responses induced by multiple sets of force and moment disturbance combinations. The given disturbance combinations are set to excite the dynamic modes identified in relevant eigenmode analysis studies. The 6-DOF dynamic responses obtained from this study are compared with eigenmode analysis results in the relevant studies. The longitudinal modes of motion showed dynamic modal characteristics similar to the eigenmode analysis results from the relevant literature

  4. Simulation and training of lumbar punctures using haptic volume rendering and a 6DOF haptic device

    NASA Astrophysics Data System (ADS)

    Färber, Matthias; Heller, Julika; Handels, Heinz

    2007-03-01

    The lumbar puncture is performed by inserting a needle into the spinal chord of the patient to inject medicaments or to extract liquor. The training of this procedure is usually done on the patient guided by experienced supervisors. A virtual reality lumbar puncture simulator has been developed in order to minimize the training costs and the patient's risk. We use a haptic device with six degrees of freedom (6DOF) to feedback forces that resist needle insertion and rotation. An improved haptic volume rendering approach is used to calculate the forces. This approach makes use of label data of relevant structures like skin, bone, muscles or fat and original CT data that contributes information about image structures that can not be segmented. A real-time 3D visualization with optional stereo view shows the punctured region. 2D visualizations of orthogonal slices enable a detailed impression of the anatomical context. The input data consisting of CT and label data and surface models of relevant structures is defined in an XML file together with haptic rendering and visualization parameters. In a first evaluation the visible human male data has been used to generate a virtual training body. Several users with different medical experience tested the lumbar puncture trainer. The simulator gives a good haptic and visual impression of the needle insertion and the haptic volume rendering technique enables the feeling of unsegmented structures. Especially, the restriction of transversal needle movement together with rotation constraints enabled by the 6DOF device facilitate a realistic puncture simulation.

  5. A 6DOF passive vibration isolator using X-shape supporting structures

    NASA Astrophysics Data System (ADS)

    Wu, Zhijing; Jing, Xingjian; Sun, Bo; Li, Fengming

    2016-10-01

    A novel 6 degree of freedom (6-DOF) passive vibration isolator is studied theoretically and validated with experiments. Based on the Stewart platform configuration, the 6-DOF isolator is constructed by 6 X-shape structures as legs, which can realize very good and tunable vibration isolation performance in all 6 directions with a passive manner. The mechanic model is established for static analysis of the working range, static stiffness and loading capacity. Thereafter, the equation of motion of the isolator is derived with the Hamilton principle. The equivalent stiffness and the displacement transmissibility in the six decoupled DOFs direction are then discussed with experimental results for validation. The results reveal that (a) by designing the structure parameters, the system can possess flexible stiffness such as negative, quasi-zero and positive stiffness, (b) due to the combination of the Stewart platform and the X-shape structure, the system can have very good vibration isolation performance in all the 6 directions and in a passive manner, and (c) compared with the simplified linear-stiffness legs, the nonlinearity of the X-shape structures enhance the passive isolator to have much better vibration isolation performance.

  6. Compensator-based 6-DOF control for probe asteroid-orbital-frame hovering with actuator limitations

    NASA Astrophysics Data System (ADS)

    Liu, Xiaosong; Zhang, Peng; Liu, Keping; Li, Yuanchun

    2016-05-01

    This paper is concerned with 6-DOF control of a probe hovering in the orbital frame of an asteroid. Considering the requirements of the scientific instruments pointing direction and orbital position in practical missions, the coordinate control of relative attitude and orbit between the probe and target asteroid is imperative. A 6-DOF dynamic equation describing the relative translational and rotational motion of a probe in the asteroid's orbital frame is derived, taking the irregular gravitation, model and parameter uncertainties and external disturbances into account. An adaptive sliding mode controller is employed to guarantee the convergence of the state error, where the adaptation law is used to estimate the unknown upper bound of system uncertainty. Then the controller is improved to deal with the practical problem of actuator limitations by introducing a RBF neural network compensator, which is used to approximate the difference between the actual control with magnitude constraint and the designed nominal control law. The closed-loop system is proved to be asymptotically stable through the Lyapunov stability analysis. Numerical simulations are performed to compare the performances of the preceding designed control laws. Simulation results demonstrate the validity of the control scheme using the compensator-based adaptive sliding mode control law in the presence of actuator limitations, system uncertainty and external disturbance.

  7. 6 DOF synchronized control for spacecraft formation flying with input constraint and parameter uncertainties.

    PubMed

    Lv, Yueyong; Hu, Qinglei; Ma, Guangfu; Zhou, Jiakang

    2011-10-01

    This paper treats the problem of synchronized control of spacecraft formation flying (SFF) in the presence of input constraint and parameter uncertainties. More specifically, backstepping based robust control is first developed for the total 6 DOF dynamic model of SFF with parameter uncertainties, in which the model consists of relative translation and attitude rotation. Then this controller is redesigned to deal with the input constraint problem by incorporating a command filter such that the generated control could be implementable even under physical or operating constraints on the control input. The convergence of the proposed control algorithms is proved by the Lyapunov stability theorem. Compared with conventional methods, illustrative simulations of spacecraft formation flying are conducted to verify the effectiveness of the proposed approach to achieve the spacecraft track the desired attitude and position trajectories in a synchronized fashion even in the presence of uncertainties, external disturbances and control saturation constraint.

  8. Numerical Investigation of Swimmer’s Gliding Stage with 6-DOF Movement

    PubMed Central

    Li, Tianzeng; Cai, Wenhao; Zhan, Jiemin

    2017-01-01

    The purpose of this study is to analyze the motion status of swimmers during their gliding stage using a numerical simulation method. This simulation strategy is conducted by solving the 3D incompressible Navier-Stokes equations using the Realizable k-ε turbulence closure equations in combination with the Six Degrees of Freedom (6-DOF) method. The uneven mass distribution of a swimmer and the roughness of the surface of the body are taken into consideration. The hydrodynamic characteristics and movement characteristics of the swimmers at different launch speeds were analyzed. The calculated results suggest that an optimal instant for starting propulsive movement is when the velocity of the swimmer decreases by 1.75 m/s to 2.0 m/s from an initial horizontal velocity of 3.1 m/s to 3.5 m/s. PMID:28125724

  9. Development of a 6-DOF manipulator driven by flexible shaft for minimally invasive surgical application.

    PubMed

    Liu, Quanquan; Kobayashi, Yo; Noguchi, Takahiko; Inko, Elgezua; Sekiguchi, Yuta; Zhang, Bo; Ye, Jing; Toyoda, Kazutaka; Hashizume, Makoto; Fujie, Masakatsu G

    2013-01-01

    This paper presents a 6-DOF manipulator which consists of four parts, 1-DOF translational joint, two 2-DOF bending joints (segment1 and segment2), and 1-DOF rotational gripper. The manipulator with "flexible shaft and Double Screw Drive (DSD) mechanism" structure can obtain omni-directional bending motion through rotation of flexible shafts. In the first prototype, the flexible shafts were connected directly with the actuators in the manipulator. Compared with the first prototype, in the second prototype, flexible shafts for power transmission are connected to the base of the manipulator. Universal joints are used for power transmission to realize distal motion. The improvement done with the design of the second prototype reduced the torque necessary to drive the flexible shafts during motion in surgical interventions. Experiment results show that the manipulator has enough range of movement for surgical intervention.

  10. Design and validation of a novel Cartesian biomechanical testing system with coordinated 6DOF real-time load control: application to the lumbar spine (L1-S, L4-L5).

    PubMed

    Kelly, Brian P; Bennett, Charles R

    2013-07-26

    Robotic methods applied to in-vitro biomechanical testing potentially offer more comprehensive evaluations however, standard position control algorithms make real-time load control problematic. This paper describes and evaluates a novel custom developed Cartesian force controlled biomechanical testing system with coordinated 6 degree of freedom (DOF) real-time load control. A custom developed 6-DOF serial manipulator with cascaded force over position control algorithms was designed, assembled, and programmed. Dial gauge tests assessed accuracy of custom linear axes. Standard test input and tuning procedures refined control performance. Two single motion segment units (L4-L5) and lumbar (L1-S) spine segments were tested under continuous pure moment application in flexion-extension, left-right lateral bending and axial rotation to 8Nm under full 6-DOF load control. Mean load control tracking errors between commanded and experimental loads were computed. Global spinal ranges of motion were compared to previously published values for standard non-robotic protocols. Individual linear and rotational axis position control accuracies were equal to or less than 6.35μm and 0.0167° respectively. Pilot pure bending tests demonstrated stable load control performance, as well as load rates, rotational velocities, and ranges of motion comparable to those for standard non-robotic in-vitro tests. Tracking errors for zero commanded forces and all moment controlled axes were less than 0.81±0.68N and 0.18±0.19Nm over all tests, respectively. The Cartesian based system simplified control application and demonstrated robust position and load control that was not limited to single axis or zero commanded loads. In addition to emulating standard biomechanical tests, the novel Cartesian force controlled testing system developed is a promising tool for biomechanical assessments with coordinated dynamic load application and coupled motion response in 6DOF.

  11. Digital compensation techniques for the effects of time lag in closed-loop simulation using the 6 DOF motion system

    NASA Technical Reports Server (NTRS)

    Brown, R.

    1982-01-01

    Efforts are continued to develop digital filter compensation schemes for the correction of momentum gains observed in the closed loop simulation of the docking of two satellites using the 6 DOF motion system. Several filters that work well for small delays ( .100ms) and a non-preloaded probe are discussed.

  12. Gait analysis of a radial symmetrical hexapod robot based on parallel mechanisms

    NASA Astrophysics Data System (ADS)

    Xu, Kun; Ding, Xilun

    2014-09-01

    Most gait studies of multi-legged robots in past neglected the dexterity of robot body and the relationship between stride length and body height. This paper investigates the performance of a radial symmetrical hexapod robot based on the dexterity of parallel mechanism. Assuming the constraints between the supporting feet and the ground with hinges, the supporting legs and the hexapod body are taken as a parallel mechanism, and each swing leg is regarded as a serial manipulator. The hexapod robot can be considered as a series of hybrid serial-parallel mechanisms while walking on the ground. Locomotion performance can be got by analyzing these equivalent mechanisms. The kinematics of the whole robotic system is established, and the influence of foothold position on the workspace of robot body is analyzed. A new method to calculate the stride length of multi-legged robots is proposed by analyzing the relationship between the workspaces of two adjacent equivalent parallel mechanisms in one gait cycle. Referring to service region and service sphere, weight service sphere and weight service region are put forward to evaluate the dexterity of robot body. The dexterity of single point in workspace and the dexterity distribution in vertical and horizontal projection plane are demonstrated. Simulation shows when the foothold offset goes up to 174 mm, the dexterity of robot body achieves its maximum value 0.1644 in mixed gait. The proposed methods based on parallel mechanisms can be used to calculate the stride length and the dexterity of multi-legged robot, and provide new approach to determine the stride length, body height, footholds in gait planning of multi-legged robot.

  13. An adaptive 6-DOF tracking method by hybrid sensing for ultrasonic endoscopes.

    PubMed

    Du, Chengyang; Chen, Xiaodong; Wang, Yi; Li, Junwei; Yu, Daoyin

    2014-06-06

    In this paper, a novel hybrid sensing method for tracking an ultrasonic endoscope within the gastrointestinal (GI) track is presented, and the prototype of the tracking system is also developed. We implement 6-DOF localization by sensing integration and information fusion. On the hardware level, a tri-axis gyroscope and accelerometer, and a magnetic angular rate and gravity (MARG) sensor array are attached at the end of endoscopes, and three symmetric cylindrical coils are placed around patients' abdomens. On the algorithm level, an adaptive fast quaternion convergence (AFQC) algorithm is introduced to determine the orientation by fusing inertial/magnetic measurements, in which the effects of magnetic disturbance and acceleration are estimated to gain an adaptive convergence output. A simplified electro-magnetic tracking (SEMT) algorithm for dimensional position is also implemented, which can easily integrate the AFQC's results and magnetic measurements. Subsequently, the average position error is under 0.3 cm by reasonable setting, and the average orientation error is 1° without noise. If magnetic disturbance or acceleration exists, the average orientation error can be controlled to less than 3.5°.

  14. Calibration and Validation of a 6-DOF Laser Propelled Lightcraft Flight Dynamics Model vs. Experimental Data

    SciTech Connect

    Kenoyer, David A.; Anderson, Kurt S.; Myrabo, Leik N.

    2008-04-28

    A detailed description is provided of the flight dynamics model and development, as well as the procedures used and results obtained in the verification, validation, and calibration of a further refined, flight dynamics system model for a laser lightcraft. The full system model is composed of individual aerodynamic, engine, laser beam, variable vehicle inertial, and 6 DOF dynamics models which have been integrated to represent all major phenomena in a consistent framework. The resulting system level model and associated code was then validated and calibrated using experimental flight information from a 16 flight trajectory data base. This model and code are being developed for the purpose of providing a physics-based predictive tool, which may be used to evaluate the performance of proposed future lightcraft vehicle concepts, engine systems, beam shapes, and active control strategies, thereby aiding in the development of the next generation of laser propelled lightcraft. This paper describes the methods used for isolating the effects of individual component models (e.g. beam, engine, dynamics, etc.) so that the performance of each of these key components could be assessed and adjusted as necessary. As the individual component models were validated, a protocol was developed which permitted the investigators to focus on individual aspects of the system and thereby identify phenomena which explain system behavior, and account for observed deviations between portions of the simulation predictions from experimental flights. These protocols are provided herein, along with physics-based explanations for deviations observed.

  15. Biped walking robot based on a 2-UPU+2-UU parallel mechanism

    NASA Astrophysics Data System (ADS)

    Miao, Zhihuai; Yao, Yan'an; Kong, Xianwen

    2014-03-01

    Existing biped robots mainly fall into two categories: robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walking robot supports the robot alternatively during walking. To improve the load carrying capability, a novel biped walking robot is proposed based on a 2-UPU+2-UU parallel mechanism. The biped walking robot is composed of two identical platforms(feet) and four limbs, including two UPU(universal-prismatic-universal serial chain) limbs and two UU limbs. To enhance its terrain adaptability like articulated vehicles, the two feet of the biped walking robot are designed as two vehicles in detail. The conditions that the geometric parameters of the feet must satisfy are discussed. The degrees-of-freedom of the mechanism is analyzed by using screw theory. Gait analysis, kinematic analysis and stability analysis of the mechanism are carried out to verify the structural design parameters. The simulation results validate the feasibility of walking on rugged terrain. Experiments with a physical prototype show that the novel biped walking robot can walk stably on smooth terrain. Due to its unique feet design and high stiffness, the biped walking robot may adapt to rugged terrain and is suitable for load-carrying.

  16. A robot-assisted orthopedic telesurgery system.

    PubMed

    Kong, M; Du, Z; Sun, L; Fu, L; Jia, Z; Wu, D

    2005-01-01

    A robot-assisted orthopedic telesurgery system, named HIT-RAOTS, has been developed according to Chinese conventional operation method. Its main function includes obtaining images with information of position and orientation of fracture, providing fracture information for doctors, assisting the doctors to complete the reposition of fracture and locking operation of intramedullary nail. In this system, a 6-dof force-reflecting master device, with a pantographic parallelogram mechanisms driven by harmonic DC servomotors, is used to control the slave manipulator movement and to translate the force from the operating room to the surgeon console; A slave robot system integrated a 6-dof force sensor, with a parallel manipulator actuated by six AC servomotors, is applied for the accurate repositioning; A virtual simulation system and human-machine interface are also developed. PI controller based on local network is used to realize the teleoperation. Only little irradiation is issued during the reposition. It can assist surgeons to perform bone-setting more safely by reducing irradiation damage to both surgeries and patients, more easily by releasing the surgeons from the heavy operation and more perfect by improving accuracy of reposition.

  17. Kinematic, workspace and singularity analysis of a new parallel robot used in minimally invasive surgery

    NASA Astrophysics Data System (ADS)

    Stoica, Alin; Pisla, Doina; Andras, Szilaghyi; Gherman, Bogdan; Gyurka, Bela-Zoltan; Plitea, Nicolae

    2013-03-01

    In the last ten years, due to development in robotic assisted surgery, the minimally invasive surgery has greatly changed. Until now, the vast majority of robots used in surgery, have serial structures. Due to the orientation parallel module, the structure is able to reduce the pressure exerted on the entrance point in the patient's abdominal wall. The parallel robot can also handle both a laparoscope as well an active instrument for different surgical procedures. The advantage of this parallel structure is that the geometric model has been obtained through an analytical approach. The kinematic modelling of a new parallel architecture, the inverse and direct geometric model and the inverse and direct kinematic models for velocities and accelerations are being determined. The paper will demonstrate that with this parallel structure, one can obtain the necessary workspace required for a minimally invasive operation. The robot workspace was generated using the inverse geometric model. An indepth study of different types of singularity is performed, allowing the development of safe control algorithms of the experimental model. Some kinematic simulation results and the experimental model of the robot are presented in the paper.

  18. Time and Frequency-Domain Cross-Verification of SLS 6DOF Trajectory Simulations

    NASA Technical Reports Server (NTRS)

    VanZwieten, Tannen; Johnson, Matthew D.; McCullough, John P.; Gilligan, Eric T.

    2014-01-01

    The SLS GNC team and its partners have developed several time- and frequency-based simulations for development and analysis of the proposed SLS launch vehicle. The simulations differ in fidelity and some have unique functionality that allows them to perform specific analyses. Some examples of the purposes of the various models are: trajectory simulation, multi-body separation, Monte Carlo, hardware in the loop, loads, and frequency domain stability analyses. While no two simulations are identical, many of the models are essentially six degree-of-freedom (6DOF) representations of the SLS plant dynamics, hardware implementation, and flight software. Thus at a high level all of those models should be in agreement. Comparison of outputs from several SLS trajectory and stability analysis tools are ongoing as part of the program's current verification effort. The purpose of these comparisons is to highlight modeling and analysis differences, verify simulation data sources, identify inconsistencies and minor errors, and ultimately to verify output data as being a good representation of the vehicle and subsystem dynamics. This paper will show selected verification work in both the time and frequency domain from the current design analysis cycle of the SLS for several of the design and analysis simulations. In the time domain, the tools that will be compared are MAVERIC, CLVTOPS, SAVANT, STARS, ARTEMIS, and POST 2. For the frequency domain analysis, the tools to be compared are FRACTAL, SAVANT, and STARS. The paper will include discussion of these tools including their capabilities, configurations, and the uses to which they are put in the SLS program. Determination of the criteria by which the simulations are compared (matching criteria) requires thoughtful consideration, and there are several pitfalls that may occur that can severely punish a simulation if not considered carefully. The paper will discuss these considerations and will present a framework for responding to

  19. Time and Frequency-Domain Cross-Verification of SLS 6DOF Trajectory Simulations

    NASA Technical Reports Server (NTRS)

    Johnson, Matthew; McCullough, John

    2017-01-01

    The Space Launch System (SLS) Guidance, Navigation, and Control (GNC) team and its partners have developed several time- and frequency-based simulations for development and analysis of the proposed SLS launch vehicle. The simulations differ in fidelity and some have unique functionality that allows them to perform specific analyses. Some examples of the purposes of the various models are: trajectory simulation, multi-body separation, Monte Carlo, hardware in the loop, loads, and frequency domain stability analyses. While no two simulations are identical, many of the models are essentially six degree-of-freedom (6DOF) representations of the SLS plant dynamics, hardware implementation, and flight software. Thus at a high level all of those models should be in agreement. Comparison of outputs from several SLS trajectory and stability analysis tools are ongoing as part of the program's current verification effort. The purpose of these comparisons is to highlight modeling and analysis differences, verify simulation data sources, identify inconsistencies and minor errors, and ultimately to verify output data as being a good representation of the vehicle and subsystem dynamics. This paper will show selected verification work in both the time and frequency domain from the current design analysis cycle of the SLS for several of the design and analysis simulations. In the time domain, the tools that will be compared are MAVERIC, CLVTOPS, SAVANT, STARS, ARTEMIS, and POST 2. For the frequency domain analysis, the tools to be compared are FRACTAL, SAVANT, and STARS. The paper will include discussion of these tools including their capabilities, configurations, and the uses to which they are put in the SLS program. Determination of the criteria by which the simulations are compared (matching criteria) requires thoughtful consideration, and there are several pitfalls that may occur that can severely punish a simulation if not considered carefully. The paper will discuss these

  20. Direct kinematics solution architectures for industrial robot manipulators: Bit-serial versus parallel

    NASA Technical Reports Server (NTRS)

    Lee, J.; Kim, K.

    1991-01-01

    A Very Large Scale Integration (VLSI) architecture for robot direct kinematic computation suitable for industrial robot manipulators was investigated. The Denavit-Hartenberg transformations are reviewed to exploit a proper processing element, namely an augmented CORDIC. Specifically, two distinct implementations are elaborated on, such as the bit-serial and parallel. Performance of each scheme is analyzed with respect to the time to compute one location of the end-effector of a 6-links manipulator, and the number of transistors required.

  1. Development of a novel soft parallel robot equipped with polymeric artificial muscles

    NASA Astrophysics Data System (ADS)

    Amiri Moghadam, Amir Ali; Kouzani, Abbas; Torabi, Keivan; Kaynak, Akif; Shahinpoor, Mohsen

    2015-03-01

    This paper presents the design, analysis and fabrication of a novel low-cost soft parallel robot for biomedical applications, including bio-micromanipulation devices. The robot consists of two active flexible polymer actuator-based links, which are connected to two rigid links by means of flexible joints. A mathematical model is established between the input voltage to the polymer actuators and the robot’s end effector position. The robot has two degrees-of-freedom, making it suitable for handling planar micromanipulation tasks. Moreover, a number of robots can be configured to operate in a cooperative manner for increasing micromanipulation dexterity. Finally, the experimental results demonstrate two main motion modes of the robot.

  2. Multi-objective optimization of a parallel ankle rehabilitation robot using modified differential evolution algorithm

    NASA Astrophysics Data System (ADS)

    Wang, Congzhe; Fang, Yuefa; Guo, Sheng

    2015-07-01

    Dimensional synthesis is one of the most difficult issues in the field of parallel robots with actuation redundancy. To deal with the optimal design of a redundantly actuated parallel robot used for ankle rehabilitation, a methodology of dimensional synthesis based on multi-objective optimization is presented. First, the dimensional synthesis of the redundant parallel robot is formulated as a nonlinear constrained multi-objective optimization problem. Then four objective functions, separately reflecting occupied space, input/output transmission and torque performances, and multi-criteria constraints, such as dimension, interference and kinematics, are defined. In consideration of the passive exercise of plantar/dorsiflexion requiring large output moment, a torque index is proposed. To cope with the actuation redundancy of the parallel robot, a new output transmission index is defined as well. The multi-objective optimization problem is solved by using a modified Differential Evolution(DE) algorithm, which is characterized by new selection and mutation strategies. Meanwhile, a special penalty method is presented to tackle the multi-criteria constraints. Finally, numerical experiments for different optimization algorithms are implemented. The computation results show that the proposed indices of output transmission and torque, and constraint handling are effective for the redundant parallel robot; the modified DE algorithm is superior to the other tested algorithms, in terms of the ability of global search and the number of non-dominated solutions. The proposed methodology of multi-objective optimization can be also applied to the dimensional synthesis of other redundantly actuated parallel robots only with rotational movements.

  3. Visual servoing of a planar overactuated parallel robot

    NASA Astrophysics Data System (ADS)

    Garrido, Rubén; Soria, Alberto; Loreto, Gerardo

    2007-10-01

    In this work a Proportional Derivative (PD) image-based visual servoing scheme applied to planar robot manipulators with revolute joints is proposed. Damping is added at the joint level using the robot active joints. The proposed control law may be though as a velocity inner loop at the joint level implementing the derivative action and a visual outer loop at the task level performing the proportional action. Since it is assumed that velocity measurements are not available, velocity estimates are obtained from active joint position measurements using a linear filter. Another feature of the proposed approach is the fact that calibration procedures for the vision system are avoided since an image-based approach is adopted. Closed loop stability is studied using Lyapunov Stability Theory. Experimental results on a laboratory prototype validates the proposed approach, moreover, it is also experimentally shown that by using a vision system for measurement of the robot end effector, kinematics errors may be tolerated in contrast with control strategies making use of the direct kinematics where performance depends on the precise knowledge of the robot kinematics.

  4. Motion capability analysis of a quadruped robot as a parallel manipulator

    NASA Astrophysics Data System (ADS)

    Yu, Jingjun; Lu, Dengfeng; Zhang, Zhongxiang; Pei, Xu

    2014-12-01

    This paper presents the forward and inverse displacement analysis of a quadruped robot MANA as a parallel manipulator in quadruple stance phase, which is used to obtain the workspace and control the motion of the body. The robot MANA designed on the basis of the structure of quadruped mammal is able to not only walk and turn in the uneven terrain, but also accomplish various manipulating tasks as a parallel manipulator in quadruple stance phase. The latter will be the focus of this paper, however. For this purpose, the leg kinematics is primarily analyzed, which lays the foundation on the gait planning in terms of locomotion and body kinematics analysis as a parallel manipulator. When all four feet of the robot contact on the ground, by assuming there is no slipping at the feet, each contacting point is treated as a passive spherical joint and the kinematic model of parallel manipulator is established. The method for choosing six non-redundant actuated joints for the parallel manipulator from all twelve optional joints is elaborated. The inverse and forward displacement analysis of the parallel manipulator is carried out using the method of coordinate transformation. Finally, based on the inverse and forward kinematic model, two issues on obtaining the reachable workspace of parallel manipulator and planning the motion of the body are implemented and verified by ADAMS simulation.

  5. Robust gain-scheduling for smart-structures in parallel robots

    NASA Astrophysics Data System (ADS)

    Algermissen, Stephan; Rose, Michael; Keimer, Ralf; Sinapius, Michael

    2009-03-01

    In the past years parallel robots demonstrated their capability in applications with high-dynamic trajectories. Smart-structures offer the potential to further increase the productivity of parallel robots by reducing disturbing vibrations caused by high dynamic loads effectively. To investigate parallel robots and their applications, including suitable control concepts for smart-structures, the Collaborative Research Center 562 was founded by the German Research Council (DFG). The latest prototype within this research center is called Triglide. It is a four degree of freedom (DOF) robot with three translational and one rotational DOF. It realizes an acceleration of 10 g* at the effector. In the structure of the robot six active rods and a tri-axial accelerometer are integrated to control effector vibrations in three translational DOF. The main challenge of this control application is the position dependent vibration behavior. A single robust controller is not able to gain satisfying performance within the entire workspace. Therefore a strategy for describing the vibration behavior by linearization at several operating points is developed. Behavior in-between is approximated by a linear approach. On a trajectory robust controllers in all operating points are smoothly switched by robust gain-scheduling. The scheduling parameters are fast varying and though a suitable stability proof is defined, based on Small-Gain approach. Several transformations enhance the results from Small-Gain Theorem and reduce the usual conservatism. Experimental data is used to show the improvements made.

  6. Dynamics and control of cable-suspended parallel robots for giant telescopes

    NASA Astrophysics Data System (ADS)

    Zhuang, Peng; Yao, Zhengqiu

    2006-06-01

    A cable-suspended parallel robot utilizes the basic idea of Stewart platform but replaces parallel links with cables and linear actuators with winches. It has many advantages over a conventional crane. The concept of applying a cable-suspended parallel robot into the construction and maintenance of giant telescope is presented in this paper. Compared with the mass and travel of the moving platform of the robot, the mass and deformation of the cables can be disregarded. Based on the premises, the kinematic and dynamic models of the robot are built. Through simulation, the inertia and gravity of moving platform are found to have dominant effect on the dynamic characteristic of the robot, while the dynamics of actuators can be disregarded, so a simplified dynamic model applicable to real-time control is obtained. Moreover, according to control-law partitioning approach and optimization theory, a workspace model-based controller is proposed considering the characteristic that the cables can only pull but not push. The simulation results indicate that the controller possesses good accuracy in pose and speed tracking, and keeps the cables in reliable tension by maintaining the minimum strain above a certain given value, thus ensures smooth motion and accurate localization for moving platform.

  7. Calibration of the Hall Measurement System for a 6-DOF Precision Stage Using Self-Adaptive Hybrid TLBO.

    PubMed

    Chen, Zhenyu; Liu, Yang; Fu, Zhenxian; Song, Shenmin; Tan, Jiubin

    2016-06-14

    To determine the planar motion of a 6-DOF precision stage, a measurement system based on three Hall sensors is adopted to obtain the X, Y, Rz motions of the stage. The machining and assembly errors in the actual mechanical system, which are difficult to measure directly, cause the parameters in the model of the Hall measurement system to deviate from their designed values. Additionally, the vertical movement of the stage will render the measurement model nonlinear. To guarantee the accuracy of the measurement, the parameters in the measurement model should be estimated and the nonlinearity compensated. In this paper, a novel approach based on self-adaptive hybrid TLBO (teaching-learning-based-optimization) is proposed to estimate the parameters in the Hall measurement model. The influences of zero deviations and vertical movements on the measurement accuracy are analyzed and compensated. The effectiveness of the proposed method is validated by experimental results obtained on a 6-DOF precision stage. Thanks to parameter estimation and calibration, the measurement error of the Hall sensor array is reduced to 6 micrometers.

  8. Calibration of the Hall Measurement System for a 6-DOF Precision Stage Using Self-Adaptive Hybrid TLBO

    PubMed Central

    Chen, Zhenyu; Liu, Yang; Fu, Zhenxian; Song, Shenmin; Tan, Jiubin

    2016-01-01

    To determine the planar motion of a 6-DOF precision stage, a measurement system based on three Hall sensors is adopted to obtain the X, Y, Rz motions of the stage. The machining and assembly errors in the actual mechanical system, which are difficult to measure directly, cause the parameters in the model of the Hall measurement system to deviate from their designed values. Additionally, the vertical movement of the stage will render the measurement model nonlinear. To guarantee the accuracy of the measurement, the parameters in the measurement model should be estimated and the nonlinearity compensated. In this paper, a novel approach based on self-adaptive hybrid TLBO (teaching-learning-based-optimization) is proposed to estimate the parameters in the Hall measurement model. The influences of zero deviations and vertical movements on the measurement accuracy are analyzed and compensated. The effectiveness of the proposed method is validated by experimental results obtained on a 6-DOF precision stage. Thanks to parameter estimation and calibration, the measurement error of the Hall sensor array is reduced to 6 micrometers. PMID:27314349

  9. Trajectory planning and control of a 6 DOF manipulator with Stewart platform-based mechanism

    NASA Technical Reports Server (NTRS)

    Nguyen, Charles C.; Antrazi, Sami

    1990-01-01

    The trajectory planning and control was studied of a robot manipulator that has 6 degrees of freedom and was designed based on the mechanism of the Stewart Platform. First the main components of the manipulator is described along with its operation. The solutions are briefly prescribed for the forward and inverse kinematics of the manipulator. After that, two trajectory planning schemes are developed using the manipulator inverse kinematics to track straight lines and circular paths. Finally experiments conducted to study the performance of the developed planning schemes in tracking a straight line and a circle are presented and discussed.

  10. Parallel elastic elements improve energy efficiency on the STEPPR bipedal walking robot

    DOE PAGES

    Mazumdar, Anirban; Spencer, Steven J.; Hobart, Clinton; ...

    2016-11-23

    This study describes how parallel elastic elements can be used to reduce energy consumption in the electric motor driven, fully-actuated, STEPPR bipedal walking robot without compromising or significantly limiting locomotive behaviors. A physically motivated approach is used to illustrate how selectively-engaging springs for hip adduction and ankle flexion predict benefits for three different flat ground walking gaits: human walking, human-like robot walking and crouched robot walking. Based on locomotion data, springs are designed and substantial reductions in power consumption are demonstrated using a bench dynamometer. These lessons are then applied to STEPPR (Sandia Transmission-Efficient Prototype Promoting Research), a fully actuatedmore » bipedal robot designed to explore the impact of tailored joint mechanisms on walking efficiency. Featuring high-torque brushless DC motors, efficient low-ratio transmissions, and high fidelity torque control, STEPPR provides the ability to incorporate novel joint-level mechanisms without dramatically altering high level control. Unique parallel elastic designs are incorporated into STEPPR, and walking data shows that hip adduction and ankle flexion springs significantly reduce the required actuator energy at those joints for several gaits. These results suggest that parallel joint springs offer a promising means of supporting quasi-static joint torques due to body mass during walking, relieving motors of the need to support these torques and substantially improving locomotive energy efficiency.« less

  11. Parallel elastic elements improve energy efficiency on the STEPPR bipedal walking robot

    SciTech Connect

    Mazumdar, Anirban; Spencer, Steven J.; Hobart, Clinton; Salton, Jonathan; Quigley, Morgan; Wu, Tingfan; Bertrand, Sylvain; Pratt, Jerry; Buerger, Stephen P.

    2016-11-23

    This study describes how parallel elastic elements can be used to reduce energy consumption in the electric motor driven, fully-actuated, STEPPR bipedal walking robot without compromising or significantly limiting locomotive behaviors. A physically motivated approach is used to illustrate how selectively-engaging springs for hip adduction and ankle flexion predict benefits for three different flat ground walking gaits: human walking, human-like robot walking and crouched robot walking. Based on locomotion data, springs are designed and substantial reductions in power consumption are demonstrated using a bench dynamometer. These lessons are then applied to STEPPR (Sandia Transmission-Efficient Prototype Promoting Research), a fully actuated bipedal robot designed to explore the impact of tailored joint mechanisms on walking efficiency. Featuring high-torque brushless DC motors, efficient low-ratio transmissions, and high fidelity torque control, STEPPR provides the ability to incorporate novel joint-level mechanisms without dramatically altering high level control. Unique parallel elastic designs are incorporated into STEPPR, and walking data shows that hip adduction and ankle flexion springs significantly reduce the required actuator energy at those joints for several gaits. These results suggest that parallel joint springs offer a promising means of supporting quasi-static joint torques due to body mass during walking, relieving motors of the need to support these torques and substantially improving locomotive energy efficiency.

  12. Evaluation of parallel reduction strategies for fusion of sensory information from a robot team

    NASA Astrophysics Data System (ADS)

    Lyons, Damian M.; Leroy, Joseph

    2015-05-01

    The advantage of using a team of robots to search or to map an area is that by navigating the robots to different parts of the area, searching or mapping can be completed more quickly. A crucial aspect of the problem is the combination, or fusion, of data from team members to generate an integrated model of the search/mapping area. In prior work we looked at the issue of removing mutual robots views from an integrated point cloud model built from laser and stereo sensors, leading to a cleaner and more accurate model. This paper addresses a further challenge: Even with mutual views removed, the stereo data from a team of robots can quickly swamp a WiFi connection. This paper proposes and evaluates a communication and fusion approach based on the parallel reduction operation, where data is combined in a series of steps of increasing subsets of the team. Eight different strategies for selecting the subsets are evaluated for bandwidth requirements using three robot missions, each carried out with teams of four Pioneer 3-AT robots. Our results indicate that selecting groups to combine based on similar pose but distant location yields the best results.

  13. Impedance Control of the Rehabilitation Robot Based on Sliding Mode Control

    NASA Astrophysics Data System (ADS)

    Zhou, Jiawang; Zhou, Zude; Ai, Qingsong

    As an auxiliary treatment, the 6-DOF parallel robot plays an important role in lower limb rehabilitation. In order to improve the efficiency and flexibility of the lower limb rehabilitation training, this paper studies the impedance controller based on the position control. A nonsingular terminal sliding mode control is developed to ensure the trajectory tracking precision and in contrast to traditional PID control strategy in the inner position loop, the system will be more stable. The stability of the system is proved by Lyapunov function to guarantee the convergence of the control errors. Simulation results validate the effectiveness of the target impedance model and show that the parallel robot can adjust gait trajectory online according to the human-machine interaction force to meet the gait request of patients, and changing the impedance parameters can meet the demands of different stages of rehabilitation training.

  14. Special purpose parallel computer architecture for real-time control and simulation in robotic applications

    NASA Technical Reports Server (NTRS)

    Fijany, Amir (Inventor); Bejczy, Antal K. (Inventor)

    1993-01-01

    This is a real-time robotic controller and simulator which is a MIMD-SIMD parallel architecture for interfacing with an external host computer and providing a high degree of parallelism in computations for robotic control and simulation. It includes a host processor for receiving instructions from the external host computer and for transmitting answers to the external host computer. There are a plurality of SIMD microprocessors, each SIMD processor being a SIMD parallel processor capable of exploiting fine grain parallelism and further being able to operate asynchronously to form a MIMD architecture. Each SIMD processor comprises a SIMD architecture capable of performing two matrix-vector operations in parallel while fully exploiting parallelism in each operation. There is a system bus connecting the host processor to the plurality of SIMD microprocessors and a common clock providing a continuous sequence of clock pulses. There is also a ring structure interconnecting the plurality of SIMD microprocessors and connected to the clock for providing the clock pulses to the SIMD microprocessors and for providing a path for the flow of data and instructions between the SIMD microprocessors. The host processor includes logic for controlling the RRCS by interpreting instructions sent by the external host computer, decomposing the instructions into a series of computations to be performed by the SIMD microprocessors, using the system bus to distribute associated data among the SIMD microprocessors, and initiating activity of the SIMD microprocessors to perform the computations on the data by procedure call.

  15. A spherical parallel three degrees-of-freedom robot for ankle-foot neuro-rehabilitation.

    PubMed

    Malosio, Matteo; Negri, Simone Pio; Pedrocchi, Nicola; Vicentini, Federico; Caimmi, Marco; Molinari Tosatti, Lorenzo

    2012-01-01

    The ankle represents a fairly complex bone structure, resulting in kinematics that hinders a flawless robot-assisted recovery of foot motility in impaired subjects. The paper proposes a novel device for ankle-foot neuro-rehabilitation based on a mechatronic redesign of the remarkable Agile Eye spherical robot on the basis of clinical requisites. The kinematic design allows the positioning of the ankle articular center close to the machine rotation center with valuable benefits in term of therapy functions. The prototype, named PKAnkle, Parallel Kinematic machine for Ankle rehabilitation, provides a 6-axes load cell for the measure of subject interaction forces/torques, and it integrates a commercial EMG-acquisition system. Robot control provides active and passive therapeutic exercises.

  16. Experimental Verification of Look-Up Table Based Real-Time Commutation of 6-DOF Planar Actuators

    NASA Astrophysics Data System (ADS)

    Boeij, Jeroen De; Lomonova, Elena

    The control of contactless magnetically levitated planar actuators with stationary coils, moving magnets and 6-DOF is very complicated. In contradiction to normal synchronous AC machines the forces and torques cannot be decoupled using a sinusoidal commutation scheme. Instead, a feedback linearization law has to be applied as commutation scheme that decouples the forces and torques and calculates the required currents to realize the desired forces and torques of the magnetic suspension. This feedback linearization law is based on the coupling matrix that links the current in each coil to the force and torque vector on the actuator. The accurate calculation of this coupling matrix in real-time is critical for controlling the planar actuator. In this paper a look-up table based method is used to apply feedback linearization and the performance of the algorithm is verified with measurements.

  17. System for simultaneously measuring 6DOF geometric motion errors using a polarization maintaining fiber-coupled dual-frequency laser.

    PubMed

    Cui, Cunxing; Feng, Qibo; Zhang, Bin; Zhao, Yuqiong

    2016-03-21

    A novel method for simultaneously measuring six degree-of-freedom (6DOF) geometric motion errors is proposed in this paper, and the corresponding measurement instrument is developed. Simultaneous measurement of 6DOF geometric motion errors using a polarization maintaining fiber-coupled dual-frequency laser is accomplished for the first time to the best of the authors' knowledge. Dual-frequency laser beams that are orthogonally linear polarized were adopted as the measuring datum. Positioning error measurement was achieved by heterodyne interferometry, and other 5DOF geometric motion errors were obtained by fiber collimation measurement. A series of experiments was performed to verify the effectiveness of the developed instrument. The experimental results showed that the stability and accuracy of the positioning error measurement are 31.1 nm and 0.5 μm, respectively. For the straightness error measurements, the stability and resolution are 60 and 40 nm, respectively, and the maximum deviation of repeatability is ± 0.15 μm in the x direction and ± 0.1 μm in the y direction. For pitch and yaw measurements, the stabilities are 0.03″ and 0.04″, the maximum deviations of repeatability are ± 0.18″ and ± 0.24″, and the accuracies are 0.4″ and 0.35″, respectively. The stability and resolution of roll measurement are 0.29″ and 0.2″, respectively, and the accuracy is 0.6″.

  18. Six degree-of-freedom scanning supports and manipulators based on parallel robots

    NASA Astrophysics Data System (ADS)

    Comin, Fabio

    1995-02-01

    The exploitation of third generation SR sources heavily relies on accurate and stable positioning and scanning of samples and optical elements. In some cases, active feedback is also necessary. Normally, these tasks are carried out by serial addition of individual components, each of them providing a well-defined excursion path. On the contrary, the exploitation of the concept of parallel robots, structures in close cinematic chain, permits us to follow any given trajectory in the six-dimensional space with a large increase in accuracy and stiffness. At ESRF, the parallel robot architecture conceived some tens of years ago for flight simulators has been adapted to both actively align and operate optical elements of considerable weight and position small samples in ultrahigh vacuum. The performance of these devices gives results far superior to the initial specification and a variety of drive mechanisms are being developed to fit the different needs of the ESRF beamlines.

  19. Strength analysis of parallel robot components in PLM Siemens NX 8.5 program

    NASA Astrophysics Data System (ADS)

    Ociepka, P.; Herbus, K.

    2015-11-01

    This article presents a series of numerical analyses in order to identify the states of stress in elements, which arise during the operation of the mechanism. The object of the research was parallel robot, which is the basis for the prototype of a driving simulator. To conduct the dynamic analysis was used the Motion Simulation module and the RecurDyn solver. In this module were created the joints which occur in the mechanism of a parallel robot. Next dynamic analyzes were performed to determine the maximal forces that will applied to the analyzed elements. It was also analyzed the platform motion during the simulation a collision of a car with a wall. In the next step, basing on the results obtained in the dynamic analysis, were performed the strength analyzes in the Advanced Simulation module. For calculation the NX Nastran solver was used.

  20. New Factorization Techniques and Parallel (log N) Algorithms for Forward Dynamics Solution of Single Closed-Chain Robot Manipulators

    NASA Technical Reports Server (NTRS)

    Fijany, Amir

    1993-01-01

    In this paper parallel 0(log N) algorithms for dynamic simulation of single closed-chain rigid multibody system as specialized to the case of a robot manipulatoar in contact with the environment are developed.

  1. Setup Accuracy of the Novalis ExacTrac 6DOF System for Frameless Radiosurgery

    SciTech Connect

    Gevaert, Thierry; Verellen, Dirk; Tournel, Koen; Linthout, Nadine; Bral, Samuel; Engels, Benedikt; Collen, Christine; Depuydt, Tom; Duchateau, Michael; Reynders, Truus; Storme, Guy; De Ridder, Mark

    2012-04-01

    Purpose: Stereotactic radiosurgery using frame-based positioning is a well-established technique for the treatment of benign and malignant lesions. By contrast, a new trend toward frameless systems using image-guided positioning techniques is gaining mainstream acceptance. This study was designed to measure the detection and positioning accuracy of the ExacTrac/Novalis Body (ET/NB) for rotations and to compare the accuracy of the frameless with the frame-based radiosurgery technique. Methods and Materials: A program was developed in house to rotate reference computed tomography images. The angles measured by the system were compared with the known rotations. The accuracy of ET/NB was evaluated with a head phantom with seven lead beads inserted, mounted on a treatment couch equipped with a robotic tilt module, and was measured with a digital water level and portal films. Multiple hidden target tests (HTT) were performed to measure the overall accuracy of the different positioning techniques for radiosurgery (i.e., frameless and frame-based with relocatable mask or invasive ring, respectively). Results: The ET/NB system can detect rotational setup errors with an average accuracy of 0.09 Degree-Sign (standard deviation [SD] 0.06 Degree-Sign ), 0.02 Degree-Sign (SD 0.07 Degree-Sign ), and 0.06 Degree-Sign (SD 0.14 Degree-Sign ) for longitudinal, lateral, and vertical rotations, respectively. The average positioning accuracy was 0.06 Degree-Sign (SD 0.04 Degree-Sign ), 0.08 Degree-Sign (SD 0.06 Degree-Sign ), and 0.08 Degree-Sign (SD 0.07 Degree-Sign ) for longitudinal, lateral and vertical rotations, respectively. The results of the HTT showed an overall three-dimensional accuracy of 0.76 mm (SD 0.46 mm) for the frameless technique, 0.87 mm (SD 0.44 mm) for the relocatable mask, and 1.19 mm (SD 0.45 mm) for the frame-based technique. Conclusions: The study showed high detection accuracy and a subdegree positioning accuracy. On the basis of phantom studies, the

  2. Design, fabrication and characterization of a micro-fluxgate intended for parallel robot application

    NASA Astrophysics Data System (ADS)

    Kirchhoff, M. R.; Bogdanski, G.; Büttgenbach, S.

    2009-05-01

    This paper presents a micro-magnetometer based on the fluxgate principle. Fluxgates detect the magnitude and direction of DC and low-frequency AC magnetic fields. The detectable flux density typically ranges from several 10 nT to about 1 mT. The introduced fluxgate sensor is fabricated using MEMS-technologies, basically UV depth lithography and electroplating for manufacturing high aspect ratio structures. It consists of helical copper coils around a soft magnetic nickel-iron (NiFe) core. The core is designed in so-called racetrack geometry, whereby the directional sensitivity of the sensor is considerably higher compared to common ring-core fluxgates. The electrical operation is based on analyzing the 2nd harmonic of the AC output signal. Configuration, manufacturing and selected characteristics of the fluxgate magnetometer are discussed in this work. The fluxgate builds the basis of an innovative angular sensor system for a parallel robot with HEXA-structure. Integrated into the passive joints of the parallel robot, the fluxgates are combined with permanent magnets rotating on the joint shafts. The magnet transmits the angular information via its magnetic orientation. In this way, the angles between the kinematic elements are measured, which allows self-calibration of the robot and the fast analytical solution of direct kinematics for an advanced workspace monitoring.

  3. The JPL Serpentine Robot: A 12 DOF System for Inspection

    NASA Technical Reports Server (NTRS)

    Paljug, E.; Ohm, T.; Hayati, S.

    1995-01-01

    The Serpentine Robot is a prototype hyper-redundant (snake-like) manipulator system developed at the Jet Propulsion Laboratory. It is designed to navigate and perform tasks in obstructed and constrained environments in which conventional 6 DOF manipulators cannot function. Described are the robot mechanical design, a joint assembly low level inverse kinematic algorithm, control development, and applications.

  4. Parallel robot for micro assembly with integrated innovative optical 3D-sensor

    NASA Astrophysics Data System (ADS)

    Hesselbach, Juergen; Ispas, Diana; Pokar, Gero; Soetebier, Sven; Tutsch, Rainer

    2002-10-01

    Recent advances in the fields of MEMS and MOEMS often require precise assembly of very small parts with an accuracy of a few microns. In order to meet this demand, a new approach using a robot based on parallel mechanisms in combination with a novel 3D-vision system has been chosen. The planar parallel robot structure with 2 DOF provides a high resolution in the XY-plane. It carries two additional serial axes for linear and rotational movement in/about z direction. In order to achieve high precision as well as good dynamic capabilities, the drive concept for the parallel (main) axes incorporates air bearings in combination with a linear electric servo motors. High accuracy position feedback is provided by optical encoders with a resolution of 0.1 μm. To allow for visualization and visual control of assembly processes, a camera module fits into the hollow tool head. It consists of a miniature CCD camera and a light source. In addition a modular gripper support is integrated into the tool head. To increase the accuracy a control loop based on an optoelectronic sensor will be implemented. As a result of an in-depth analysis of different approaches a photogrammetric system using one single camera and special beam-splitting optics was chosen. A pattern of elliptical marks is applied to the surfaces of workpiece and gripper. Using a model-based recognition algorithm the image processing software identifies the gripper and the workpiece and determines their relative position. A deviation vector is calculated and fed into the robot control to guide the gripper.

  5. An Inexpensive Method for Kinematic Calibration of a Parallel Robot by Using One Hand-Held Camera as Main Sensor

    PubMed Central

    Traslosheros, Alberto; Sebastián, José María; Torrijos, Jesús; Carelli, Ricardo; Castillo, Eduardo

    2013-01-01

    This paper presents a novel method for the calibration of a parallel robot, which allows a more accurate configuration instead of a configuration based on nominal parameters. It is used, as the main sensor with one camera installed in the robot hand that determines the relative position of the robot with respect to a spherical object fixed in the working area of the robot. The positions of the end effector are related to the incremental positions of resolvers of the robot motors. A kinematic model of the robot is used to find a new group of parameters, which minimizes errors in the kinematic equations. Additionally, properties of the spherical object and intrinsic camera parameters are utilized to model the projection of the object in the image and thereby improve spatial measurements. Finally, several working tests, static and tracking tests are executed in order to verify how the robotic system behaviour improves by using calibrated parameters against nominal parameters. In order to emphasize that, this proposed new method uses neither external nor expensive sensor. That is why new robots are useful in teaching and research activities. PMID:23921827

  6. Trajectory tracking control of parallel robots in the presence of joint drive flexibility

    NASA Astrophysics Data System (ADS)

    Ider, S. Kemal; Korkmaz, Ozan

    2009-01-01

    Trajectory tracking control of parallel manipulators is aimed in the presence of flexibility at the joint drives. Joint structural damping is also considered in the dynamic model. The system is first converted into an open-tree structure by disconnecting a sufficient number of unactuated joints. The closed loops are then expressed by constraint equations. It is shown that, in a parallel robot with flexible joint drives, the acceleration level inverse dynamics equations are singular because the control torques do not have an instantaneous effect on the end-effector accelerations due to the elastic media. Eliminating the Lagrange multipliers and the intermediate variables, a fourth-order input-output relation is obtained between the actuator torques and the end-effector position variables. The proposed control law decouples and linearizes the system and achieves asymptotic stability by feedback of positions and velocities of the actuated joints and rotors. As a case study, a three degree of freedom, two legged planar parallel manipulator is simulated to illustrate the performance of the method. The end-effector desired trajectory is chosen such that the kinematic and drive singular positions are avoided.

  7. Robotics.

    ERIC Educational Resources Information Center

    Waddell, Steve; Doty, Keith L.

    1999-01-01

    "Why Teach Robotics?" (Waddell) suggests that the United States lags behind Europe and Japan in use of robotics in industry and teaching. "Creating a Course in Mobile Robotics" (Doty) outlines course elements of the Intelligent Machines Design Lab. (SK)

  8. Parallel algorithm for dominant points correspondences in robot binocular stereo vision

    NASA Technical Reports Server (NTRS)

    Al-Tammami, A.; Singh, B.

    1993-01-01

    This paper presents an algorithm to find the correspondences of points representing dominant feature in robot stereo vision. The algorithm consists of two main steps: dominant point extraction and dominant point matching. In the feature extraction phase, the algorithm utilizes the widely used Moravec Interest Operator and two other operators: the Prewitt Operator and a new operator called Gradient Angle Variance Operator. The Interest Operator in the Moravec algorithm was used to exclude featureless areas and simple edges which are oriented in the vertical, horizontal, and two diagonals. It was incorrectly detecting points on edges which are not on the four main directions (vertical, horizontal, and two diagonals). The new algorithm uses the Prewitt operator to exclude featureless areas, so that the Interest Operator is applied only on the edges to exclude simple edges and to leave interesting points. This modification speeds-up the extraction process by approximately 5 times. The Gradient Angle Variance (GAV), an operator which calculates the variance of the gradient angle in a window around the point under concern, is then applied on the interesting points to exclude the redundant ones and leave the actual dominant ones. The matching phase is performed after the extraction of the dominant points in both stereo images. The matching starts with dominant points in the left image and does a local search, looking for corresponding dominant points in the right image. The search is geometrically constrained the epipolar line of the parallel-axes stereo geometry and the maximum disparity of the application environment. If one dominant point in the right image lies in the search areas, then it is the corresponding point of the reference dominant point in the left image. A parameter provided by the GAV is thresholded and used as a rough similarity measure to select the corresponding dominant point if there is more than one point the search area. The correlation is used as

  9. Understanding of and applications for robot vision guidance at KSC

    NASA Technical Reports Server (NTRS)

    Shawaga, Lawrence M.

    1988-01-01

    The primary thrust of robotics at KSC is for the servicing of Space Shuttle remote umbilical docking functions. In order for this to occur, robots performing servicing operations must be capable of tracking a swaying Orbiter in Six Degrees of Freedom (6-DOF). Currently, in NASA KSC's Robotic Applications Development Laboratory (RADL), an ASEA IRB-90 industrial robot is being equipped with a real-time computer vision (hardware and software) system to allow it to track a simulated Orbiter interface (target) in 6-DOF. The real-time computer vision system effectively becomes the eyes for the lab robot, guiding it through a closed loop visual feedback system to move with the simulated Orbiter interface. This paper will address an understanding of this vision guidance system and how it will be applied to remote umbilical servicing at KSC. In addition, other current and future applications will be addressed.

  10. Development of a Stereo Vision Measurement System for a 3D Three-Axial Pneumatic Parallel Mechanism Robot Arm

    PubMed Central

    Chiang, Mao-Hsiung; Lin, Hao-Ting; Hou, Chien-Lun

    2011-01-01

    In this paper, a stereo vision 3D position measurement system for a three-axial pneumatic parallel mechanism robot arm is presented. The stereo vision 3D position measurement system aims to measure the 3D trajectories of the end-effector of the robot arm. To track the end-effector of the robot arm, the circle detection algorithm is used to detect the desired target and the SAD algorithm is used to track the moving target and to search the corresponding target location along the conjugate epipolar line in the stereo pair. After camera calibration, both intrinsic and extrinsic parameters of the stereo rig can be obtained, so images can be rectified according to the camera parameters. Thus, through the epipolar rectification, the stereo matching process is reduced to a horizontal search along the conjugate epipolar line. Finally, 3D trajectories of the end-effector are computed by stereo triangulation. The experimental results show that the stereo vision 3D position measurement system proposed in this paper can successfully track and measure the fifth-order polynomial trajectory and sinusoidal trajectory of the end-effector of the three- axial pneumatic parallel mechanism robot arm. PMID:22319408

  11. Development of a stereo vision measurement system for a 3D three-axial pneumatic parallel mechanism robot arm.

    PubMed

    Chiang, Mao-Hsiung; Lin, Hao-Ting; Hou, Chien-Lun

    2011-01-01

    In this paper, a stereo vision 3D position measurement system for a three-axial pneumatic parallel mechanism robot arm is presented. The stereo vision 3D position measurement system aims to measure the 3D trajectories of the end-effector of the robot arm. To track the end-effector of the robot arm, the circle detection algorithm is used to detect the desired target and the SAD algorithm is used to track the moving target and to search the corresponding target location along the conjugate epipolar line in the stereo pair. After camera calibration, both intrinsic and extrinsic parameters of the stereo rig can be obtained, so images can be rectified according to the camera parameters. Thus, through the epipolar rectification, the stereo matching process is reduced to a horizontal search along the conjugate epipolar line. Finally, 3D trajectories of the end-effector are computed by stereo triangulation. The experimental results show that the stereo vision 3D position measurement system proposed in this paper can successfully track and measure the fifth-order polynomial trajectory and sinusoidal trajectory of the end-effector of the three- axial pneumatic parallel mechanism robot arm.

  12. Online optimal experimental re-design in robotic parallel fed-batch cultivation facilities.

    PubMed

    Cruz Bournazou, M N; Barz, T; Nickel, D B; Lopez Cárdenas, D C; Glauche, F; Knepper, A; Neubauer, P

    2017-03-01

    We present an integrated framework for the online optimal experimental re-design applied to parallel nonlinear dynamic processes that aims to precisely estimate the parameter set of macro kinetic growth models with minimal experimental effort. This provides a systematic solution for rapid validation of a specific model to new strains, mutants, or products. In biosciences, this is especially important as model identification is a long and laborious process which is continuing to limit the use of mathematical modeling in this field. The strength of this approach is demonstrated by fitting a macro-kinetic differential equation model for Escherichia coli fed-batch processes after 6 h of cultivation. The system includes two fully-automated liquid handling robots; one containing eight mini-bioreactors and another used for automated at-line analyses, which allows for the immediate use of the available data in the modeling environment. As a result, the experiment can be continually re-designed while the cultivations are running using the information generated by periodical parameter estimations. The advantages of an online re-computation of the optimal experiment are proven by a 50-fold lower average coefficient of variation on the parameter estimates compared to the sequential method (4.83% instead of 235.86%). The success obtained in such a complex system is a further step towards a more efficient computer aided bioprocess development. Biotechnol. Bioeng. 2017;114: 610-619. © 2016 Wiley Periodicals, Inc.

  13. Modeling and simulation of a Stewart platform type parallel structure robot

    NASA Technical Reports Server (NTRS)

    Lim, Gee Kwang; Freeman, Robert A.; Tesar, Delbert

    1989-01-01

    The kinematics and dynamics of a Stewart Platform type parallel structure robot (NASA's Dynamic Docking Test System) were modeled using the method of kinematic influence coefficients (KIC) and isomorphic transformations of system dependence from one set of generalized coordinates to another. By specifying the end-effector (platform) time trajectory, the required generalized input forces which would theoretically yield the desired motion were determined. It was found that the relationship between the platform motion and the actuators motion was nonlinear. In addition, the contribution to the total generalized forces, required at the actuators, from the acceleration related terms were found to be more significant than the velocity related terms. Hence, the curve representing the total required actuator force generally resembled the curve for the acceleration related force. Another observation revealed that the acceleration related effective inertia matrix I sub dd had the tendency to decouple, with the elements on the main diagonal of I sub dd being larger than the off-diagonal elements, while the velocity related inertia power array P sub ddd did not show such tendency. This tendency results in the acceleration related force curve of a given actuator resembling the acceleration profile of that particular actuator. Furthermore, it was indicated that the effective inertia matrix for the legs is more decoupled than that for the platform. These observations provide essential information for further research to develop an effective control strategy for real-time control of the Dynamic Docking Test System.

  14. Joint-space adaptive control of a 6 DOF end-effector with closed-kinematic chain mechanism

    NASA Technical Reports Server (NTRS)

    Nguyen, Charles C.; Zhou, Zhen-Lei

    1989-01-01

    The development is presented for a joint-space adaptive scheme that controls the joint position of a six-degree-of-freedom (DOF) robot end-effector performing fine and precise motion within a very limited workspace. The end-effector was built to study autonomous assembly of NASA hardware in space. The design of the adaptive controller is based on the concept of model reference adaptive control (MRAC) and Lyapunov direct method. In the development, it is assumed that the end-effector performs slowly varying motion. Computer simulation is performed to investigate the performance of the developed control scheme on position control of the end-effector. Simulation results manifest that the adaptive control scheme provides excellent tracking of several test paths.

  15. Kinematic analysis of platform-type robotic manipulators

    NASA Astrophysics Data System (ADS)

    Shi, Xiaolun

    New methods are developed for the kinematic analysis of serial and platform-type parallel robotic manipulators, including forward and inverse kinematic solutions, singularity identifications and workspace evaluation. Differences between serial and platform-type parallel manipulators, which can provide substantially improved end-point rigidity compared with the conventional serial robotic arms, are addressed. The problem of determining the screw parameters of rigid body motion from initial and final position data is discussed, as a basis to search for a general and efficient procedure to solve the complex forward kinematics problem of platform-type manipulators. Several Screw-Theory based approaches for solving the inverse instantaneous problem of 6 DOF serial manipulators are studied and compared in terms of their computational efficiency, accuracy, sensitivity to data error and capability of dealing with singularities. A modified Vector Decomposition method is then proposed for solving the IIK problem and for singularity analysis of serial kinematic chains, the method is especially effective when applied to the wrist partitioned serial manipulators, which are essential components to any platform-type parallel manipulators. By using the data of three point positions, velocities, and accelerations of the end effector a general method is developed for solving the forward kinematics problem, including position, velocity and acceleration kinematics, of platform-type manipulators. The solution procedure can be applied to a wide variety of platform-type manipulators such as the 6 DOF Steward Platform manipulator and other models. It is found that while the solution for the forward position kinematics of a platform-type manipulator can be obtained by solving a non-linear system of equations, the closed-form solutions for forward rate and acceleration kinematics can be found by solving a system of linear equations. Based on the proposed kinematic formulations, an algorithm

  16. Validation of a six degree-of-freedom robotic system for hip in vitro biomechanical testing.

    PubMed

    Goldsmith, Mary T; Rasmussen, Matthew T; Lee Turnbull, Travis; Trindade, Christiano A C; LaPrade, Robert F; Philippon, Marc J; Wijdicks, Coen A

    2015-11-26

    Currently, there exists a need for a more thorough understanding of native hip joint kinematics to improve the understanding of pathological conditions, injury mechanisms, and surgical interventions. A biomechanical testing system able to accomplish multiple degree-of-freedom (DOF) movements is required to study the complex articulation of the hip joint. Therefore, the purpose of this study was to assess the repeatability and comparative accuracy of a 6 DOF robotic system as a testing platform for range of motion in vitro hip biomechanical analysis. Intact human cadaveric pelvises, complete with full femurs, were prepared, and a coordinate measuring machine collected measurements of pertinent femoral and pelvic bony landmarks used to define the anatomic hip axes. Passive flexion/extension path and simulated clinical exam kinematics were recorded using a 6 DOF robotic system. The results of this study demonstrate that the 6 DOF robotic system was able to identify hip passive paths in a highly repeatable manner (median RMS error of <0.1mm and <0.4°), and the robotically simulated clinical exams were consistent and repeatable (rotational RMS error ≤0.8°) in determining hip ranges of motion. Thus, a 6 DOF robotic system is a valuable and effective tool for range of motion in vitro hip biomechanical analysis.

  17. Robotics

    SciTech Connect

    Scheide, A.W.

    1983-11-01

    This article reviews some of the technical areas and history associated with robotics, provides information relative to the formation of a Robotics Industry Committee within the Industry Applications Society (IAS), and describes how all activities relating to robotics will be coordinated within the IEEE. Industrial robots are being used for material handling, processes such as coating and arc welding, and some mechanical and electronics assembly. An industrial robot is defined as a programmable, multifunctional manipulator designed to move material, parts, tools, or specialized devices through variable programmed motions for a variety of tasks. The initial focus of the Robotics Industry Committee will be on the application of robotics systems to the various industries that are represented within the IAS.

  18. Error Analysis and Experimental Study of a Bi-Planar Parallel Mechanism in a Pedicle Screw Robot System.

    PubMed

    Duan, Qingjuan; Du, Zhijiang; Yu, Hongjian; Wang, Yongfeng; Dong, Wei

    2016-11-30

    Due to the urgent need for high precision surgical equipment for minimally invasive spinal surgery, a novel robot-assistant system was developed for the accurate placement of pedicle screws in lumbar spinal surgeries. The structure of the robot was based on a macro-micro mechanism, which includes a serial mechanism (macro part) and a bi-planar 5R parallel mechanism (micro part). The macro part was used to achieve a large workspace, while the micro part was used to obtain high stiffness and accuracy. Based on the transfer function of dimension errors, the factors affecting the accuracy of the end effectors were analyzed. Then the manufacturing errors and joint angle error on the position-stance of the end effectors were investigated. Eventually, the mechanism of the strain energy produced by the deformation of linkage via forced assembly and displacements of the output point were calculated. The amount of the transfer errors was quantitatively analyzed by the simulation. Experimental tests show that the error of the bi-planar 5R mechanism can be controlled no more than 1 mm for translation and 1° for rotation, which satisfies the required absolute position accuracy of the robot.

  19. Error Analysis and Experimental Study of a Bi-Planar Parallel Mechanism in a Pedicle Screw Robot System

    PubMed Central

    Duan, Qingjuan; Du, Zhijiang; Yu, Hongjian; Wang, Yongfeng; Dong, Wei

    2016-01-01

    Due to the urgent need for high precision surgical equipment for minimally invasive spinal surgery, a novel robot-assistant system was developed for the accurate placement of pedicle screws in lumbar spinal surgeries. The structure of the robot was based on a macro-micro mechanism, which includes a serial mechanism (macro part) and a bi-planar 5R parallel mechanism (micro part). The macro part was used to achieve a large workspace, while the micro part was used to obtain high stiffness and accuracy. Based on the transfer function of dimension errors, the factors affecting the accuracy of the end effectors were analyzed. Then the manufacturing errors and joint angle error on the position-stance of the end effectors were investigated. Eventually, the mechanism of the strain energy produced by the deformation of linkage via forced assembly and displacements of the output point were calculated. The amount of the transfer errors was quantitatively analyzed by the simulation. Experimental tests show that the error of the bi-planar 5R mechanism can be controlled no more than 1 mm for translation and 1° for rotation, which satisfies the required absolute position accuracy of the robot. PMID:27916869

  20. Robotics

    NASA Technical Reports Server (NTRS)

    1985-01-01

    An overview of research being done into the use of robotic devices in space by MSFC is discussed. The video includes footage and explanations of robots being used to blast layers of thermal coating from the Space Shuttle's external tanks, the Shuttle's Remote Manipulator Arm, and animations of an Orbiting Maneuvering Vehicle to retrieve and repair satellites.

  1. Development of a 3D parallel mechanism robot arm with three vertical-axial pneumatic actuators combined with a stereo vision system.

    PubMed

    Chiang, Mao-Hsiung; Lin, Hao-Ting

    2011-01-01

    This study aimed to develop a novel 3D parallel mechanism robot driven by three vertical-axial pneumatic actuators with a stereo vision system for path tracking control. The mechanical system and the control system are the primary novel parts for developing a 3D parallel mechanism robot. In the mechanical system, a 3D parallel mechanism robot contains three serial chains, a fixed base, a movable platform and a pneumatic servo system. The parallel mechanism are designed and analyzed first for realizing a 3D motion in the X-Y-Z coordinate system of the robot's end-effector. The inverse kinematics and the forward kinematics of the parallel mechanism robot are investigated by using the Denavit-Hartenberg notation (D-H notation) coordinate system. The pneumatic actuators in the three vertical motion axes are modeled. In the control system, the Fourier series-based adaptive sliding-mode controller with H(∞) tracking performance is used to design the path tracking controllers of the three vertical servo pneumatic actuators for realizing 3D path tracking control of the end-effector. Three optical linear scales are used to measure the position of the three pneumatic actuators. The 3D position of the end-effector is then calculated from the measuring position of the three pneumatic actuators by means of the kinematics. However, the calculated 3D position of the end-effector cannot consider the manufacturing and assembly tolerance of the joints and the parallel mechanism so that errors between the actual position and the calculated 3D position of the end-effector exist. In order to improve this situation, sensor collaboration is developed in this paper. A stereo vision system is used to collaborate with the three position sensors of the pneumatic actuators. The stereo vision system combining two CCD serves to measure the actual 3D position of the end-effector and calibrate the error between the actual and the calculated 3D position of the end-effector. Furthermore, to

  2. Analysis of the kinematic characteristics of a high-speed parallel robot with Schönflies motion: Mobility, kinematics, and singularity

    NASA Astrophysics Data System (ADS)

    Xie, Fugui; Liu, Xin-Jun

    2016-06-01

    This study introduces a high-speed parallel robot with Schönflies motion. This robot exhibits a promising prospect in realizing high-speed pick-andplace manipulation for packaging production lines. The robot has four identical limbs and a single platform. Its compact structure and single-platform concept provides this robot with good dynamic response potential. A line graph method based on Grassmann line geometry is used to investigate the mobility characteristics of the proposed robot. A generalized Blanding rule is also introduced into this procedure to realize mutual conversion between the line graphs for motions and constraints. Subsequently, the inverse kinematics is derived, and the singularity issue of the robot is investigated using both qualitative and quantitative approaches. Input and output transmission singularity indices are defined based on the reciprocal product in screw theory and the virtual coefficient by considering motion/force transmission performance. Thereafter, the singular loci of the proposed robot with specific geometric parameters are derived. The mobility analysis, inverse kinematics modeling, and singularity analysis conducted in this study are helpful in developing the robot.

  3. Design of a series elastic actuator for a compliant parallel wrist rehabilitation robot.

    PubMed

    Sergi, Fabrizio; Lee, Melissa M; O'Malley, Marcia K

    2013-06-01

    This paper presents the design of a novel linear series elastic actuator purposely designed to match the requirements of robots for wrist rehabilitation: backdriveability, intrinsic compliance, and capability to be controlled as ideal force/torque sources. An existing rehabilitation robot is adapted to include intrinsic compliance in the design. A novel linear compliant element is designed to meet dimensional and force/stiffness requirements; a force sensing scheme involving a Hall-effect sensor is optimized in FEM simulations and developed. Linearity tests of the compliant sensing element show a maximum of 4.5% of FSO combined nonlinearity and hysteresis errors. Characterization experiments show that the developed system introduces physical compliance, still guaranteeing accurate force control in a frequency range largely compatible with that required for wrist assistance during rehabilitation.

  4. Probe Scanning Support System by a Parallel Mechanism for Robotic Echography

    NASA Astrophysics Data System (ADS)

    Aoki, Yusuke; Kaneko, Kenta; Oyamada, Masami; Takachi, Yuuki; Masuda, Kohji

    We propose a probe scanning support system based on force/visual servoing control for robotic echography. First, we have designed and formulated its inverse kinematics the construction of mechanism. Next, we have developed a scanning method of the ultrasound probe on body surface to construct visual servo system based on acquired echogram by the standalone medical robot to move the ultrasound probe on patient abdomen in three-dimension. The visual servo system detects local change of brightness in time series echogram, which is stabilized the position of the probe by conventional force servo system in the robot, to compensate not only periodical respiration motion but also body motion. Then we integrated control method of the visual servo with the force servo as a hybrid control in both of position and force. To confirm the ability to apply for actual abdomen, we experimented the total system to follow the gallbladder as a moving target to keep its position in the echogram by minimizing variation of reaction force on abdomen. As the result, the system has a potential to be applied to automatic detection of human internal organ.

  5. A resolved two-way coupled CFD/6-DOF approach for predicting embolus transport and the embolus-trapping efficiency of IVC filters.

    PubMed

    Aycock, Kenneth I; Campbell, Robert L; Manning, Keefe B; Craven, Brent A

    2016-11-30

    Inferior vena cava (IVC) filters are medical devices designed to provide a mechanical barrier to the passage of emboli from the deep veins of the legs to the heart and lungs. Despite decades of development and clinical use, IVC filters still fail to prevent the passage of all hazardous emboli. The objective of this study is to (1) develop a resolved two-way computational model of embolus transport, (2) provide verification and validation evidence for the model, and (3) demonstrate the ability of the model to predict the embolus-trapping efficiency of an IVC filter. Our model couples computational fluid dynamics simulations of blood flow to six-degree-of-freedom simulations of embolus transport and resolves the interactions between rigid, spherical emboli and the blood flow using an immersed boundary method. Following model development and numerical verification and validation of the computational approach against benchmark data from the literature, embolus transport simulations are performed in an idealized IVC geometry. Centered and tilted filter orientations are considered using a nonlinear finite element-based virtual filter placement procedure. A total of 2048 coupled CFD/6-DOF simulations are performed to predict the embolus-trapping statistics of the filter. The simulations predict that the embolus-trapping efficiency of the IVC filter increases with increasing embolus diameter and increasing embolus-to-blood density ratio. Tilted filter placement is found to decrease the embolus-trapping efficiency compared with centered filter placement. Multiple embolus-trapping locations are predicted for the IVC filter, and the trapping locations are predicted to shift upstream and toward the vessel wall with increasing embolus diameter. Simulations of the injection of successive emboli into the IVC are also performed and reveal that the embolus-trapping efficiency decreases with increasing thrombus load in the IVC filter. In future work, the computational tool could be

  6. Clinical Evaluation of a Robotic 6-Degree of Freedom Treatment Couch for Frameless Radiosurgery

    SciTech Connect

    Gevaert, Thierry; Verellen, Dirk; Engels, Benedikt; Depuydt, Tom; Heuninckx, Karina; Tournel, Koen; Duchateau, Michael; Reynders, Truus; De Ridder, Mark

    2012-05-01

    Purpose: To evaluate the added value of 6-degree of freedom (DOF) patient positioning with a robotic couch compared with 4DOF positioning for intracranial lesions and to estimate the immobilization characteristics of the BrainLAB frameless mask (BrainLAB AG, Feldkirchen, Germany), more specifically, the setup errors and intrafraction motion. Methods and Materials: We enrolled 40 patients with 66 brain metastases treated with frameless stereotactic radiosurgery and a 6DOF robotic couch. Patient positioning was performed with the BrainLAB ExacTrac stereoscopic X-ray system. Positioning results were collected before and after treatment to assess patient setup error and intrafraction motion. Existing treatment planning data were loaded and simulated for 4DOF positioning and compared with the 6DOF positioning. The clinical relevance was analyzed by means of the Paddick conformity index and the ratio of prescribed isodose volume covered with 4DOF to that obtained with the 6DOF positioning. Results: The mean three-dimensional setup error before 6DOF correction was 1.91 mm (SD, 1.25 mm). The rotational errors were larger in the longitudinal (mean, 0.23 Degree-Sign ; SD, 0.82 Degree-Sign ) direction compared with the lateral (mean, -0.09 Degree-Sign ; SD, 0.72 Degree-Sign ) and vertical (mean, -0.10 Degree-Sign ; SD, 1.03 Degree-Sign ) directions (p < 0.05). The mean three-dimensional intrafraction shift was 0.58 mm (SD, 0.42 mm). The mean intrafractional rotational errors were comparable for the vertical, longitudinal, and lateral directions: 0.01 Degree-Sign (SD, 0.35 Degree-Sign ), 0.03 Degree-Sign (SD, 0.31 Degree-Sign ), and -0.03 Degree-Sign (SD, 0.33 Degree-Sign ), respectively. The mean conformity index decreased from 0.68 (SD, 0.08) (6DOF) to 0.59 (SD, 0.12) (4DOF) (p < 0.05). A loss of prescribed isodose coverage of 5% (SD, 0.08) was found with the 4DOF positioning (p < 0.05). Half a degree for longitudinal and lateral rotations can be identified as a threshold

  7. Robotic platform for parallelized cultivation and monitoring of microbial growth parameters in microwell plates.

    PubMed

    Knepper, Andreas; Heiser, Michael; Glauche, Florian; Neubauer, Peter

    2014-12-01

    The enormous variation possibilities of bioprocesses challenge process development to fix a commercial process with respect to costs and time. Although some cultivation systems and some devices for unit operations combine the latest technology on miniaturization, parallelization, and sensing, the degree of automation in upstream and downstream bioprocess development is still limited to single steps. We aim to face this challenge by an interdisciplinary approach to significantly shorten development times and costs. As a first step, we scaled down analytical assays to the microliter scale and created automated procedures for starting the cultivation and monitoring the optical density (OD), pH, concentrations of glucose and acetate in the culture medium, and product formation in fed-batch cultures in the 96-well format. Then, the separate measurements of pH, OD, and concentrations of acetate and glucose were combined to one method. This method enables automated process monitoring at dedicated intervals (e.g., also during the night). By this approach, we managed to increase the information content of cultivations in 96-microwell plates, thus turning them into a suitable tool for high-throughput bioprocess development. Here, we present the flowcharts as well as cultivation data of our automation approach.

  8. Robotics

    NASA Technical Reports Server (NTRS)

    Ambrose, Robert O.

    2007-01-01

    Lunar robotic functions include: 1. Transport of crew and payloads on the surface of the moon; 2. Offloading payloads from a lunar lander; 3. Handling the deployment of surface systems; with 4. Human commanding of these functions from inside a lunar vehicle, habitat, or extravehicular (space walk), with Earth-based supervision. The systems that will perform these functions may not look like robots from science fiction. In fact, robotic functions may be automated trucks, cranes and winches. Use of this equipment prior to the crew s arrival or in the potentially long periods without crews on the surface, will require that these systems be computer controlled machines. The public release of NASA's Exploration plans at the 2nd Space Exploration Conference (Houston, December 2006) included a lunar outpost with as many as four unique mobility chassis designs. The sequence of lander offloading tasks involved as many as ten payloads, each with a unique set of geometry, mass and interface requirements. This plan was refined during a second phase study concluded in August 2007. Among the many improvements to the exploration plan were a reduction in the number of unique mobility chassis designs and a reduction in unique payload specifications. As the lunar surface system payloads have matured, so have the mobility and offloading functional requirements. While the architecture work continues, the community can expect to see functional requirements in the areas of surface mobility, surface handling, and human-systems interaction as follows: Surface Mobility 1. Transport crew on the lunar surface, accelerating construction tasks, expanding the crew s sphere of influence for scientific exploration, and providing a rapid return to an ascent module in an emergency. The crew transport can be with an un-pressurized rover, a small pressurized rover, or a larger mobile habitat. 2. Transport Extra-Vehicular Activity (EVA) equipment and construction payloads. 3. Transport habitats and

  9. Development of kinematic equations and determination of workspace of a 6 DOF end-effector with closed-kinematic chain mechanism

    NASA Technical Reports Server (NTRS)

    Nguyen, Charles C.; Pooran, Farhad J.

    1989-01-01

    This report presents results from the research grant entitled Active Control of Robot Manipulators, funded by the Goddard Space Flight Center, under Grant NAG5-780, for the period July 1, 1988 to January 1, 1989. An analysis is presented of a 6 degree-of-freedom robot end-effector built to study telerobotic assembly of NASA hardware in space. Since the end-effector is required to perform high precision motion in a limited workspace, closed-kinematic mechanisms are chosen for its design. A closed-form solution is obtained for the inverse kinematic problem and an iterative procedure employing Newton-Raphson method is proposed to solve the forward kinematic problem. A study of the end-effector workspace results in a general procedure for the workspace determination based on link constraints. Computer simulation results are presented.

  10. Robotics

    NASA Technical Reports Server (NTRS)

    Rothschild, Lynn J.

    2012-01-01

    Earth's upper atmosphere is an extreme environment: dry, cold, and irradiated. It is unknown whether our aerobiosphere is limited to the transport of life, or there exist organisms that grow and reproduce while airborne (aerophiles); the microenvironments of suspended particles may harbor life at otherwise uninhabited altitudes[2]. The existence of aerophiles would significantly expand the range of planets considered candidates for life by, for example, including the cooler clouds of a hot Venus-like planet. The X project is an effort to engineer a robotic exploration and biosampling payload for a comprehensive survey of Earth's aerobiology. While many one-shot samples have been retrieved from above 15 km, their results are primarily qualitative; variations in method confound comparisons, leaving such major gaps in our knowledge of aerobiology as quantification of populations at different strata and relative species counts[1]. These challenges and X's preliminary solutions are explicated below. X's primary balloon payload is undergoing a series of calibrations before beginning flights in Spring 2012. A suborbital launch is currently planned for Summer 2012. A series of ground samples taken in Winter 2011 is being used to establish baseline counts and identify likely background contaminants.

  11. Simulation and experimental control of a 3-RPR parallel robot using optimal fuzzy controller and fast on/off solenoid valves based on the PWM wave.

    PubMed

    Moezi, Seyed Alireza; Rafeeyan, Mansour; Zakeri, Ehsan; Zare, Amin

    2016-03-01

    In this paper, a robust optimal fuzzy controller based on the Pulse Width Modulation (PWM) technique is proposed to control a laboratory parallel robot using inexpensive on/off solenoid valves. The controller coefficients are determined using Modified Cuckoo Optimization Algorithm. The objective function of this method is considered such that the results show the position tracking by the robot with less force and more efficiency. Regarding the results of experimental tests, the control strategy with on/off valves indicates good performance such that the maximum value of RMS of error for a circular path with increasing force on the system is 3.1mm. Furthermore, the results show the superiority of the optimal fuzzy controller compared with optimal PID controller in tracking paths with different conditions and uncertainties.

  12. Calibration technology in application of robot-laser scanning system

    NASA Astrophysics Data System (ADS)

    Ren, YongJie; Yin, ShiBin; Zhu, JiGui

    2012-11-01

    A system composed of laser sensor and 6-DOF industrial robot is proposed to obtain complete three-dimensional (3-D) information of the object surface. Suitable for the different combining ways of laser sensor and robot, a new method to calibrate the position and pose between sensor and robot is presented. By using a standard sphere with known radius as a reference tool, the rotation and translation matrices between the laser sensor and robot are computed, respectively in two steps, so that many unstable factors introduced in conventional optimization methods can be avoided. The experimental results show that the accuracy of the proposed calibration method can be achieved up to 0.062 mm. The calibration method is also implemented into the automated robot scanning system to reconstruct a car door panel.

  13. Development of a robotic patient positioning system with a wide beam-angle range for fixed-beam particle therapy

    NASA Astrophysics Data System (ADS)

    Choi, Hongseok; Park, Jong-Oh; Ko, Seong Young; Park, Sukho; Cho, Sungho; Jung, Won-Gyun; Park, Yong Kyun; Kang, Jung Suk

    2016-10-01

    This paper describes a robotic patient positioning system (PPS) for a fixed-beam heavy-ion therapy system. In order to extend the limited irradiation angle range of the fixed beam, we developed a 6-degree-of-freedom (6-DOF) serial-link robotic arm and used it as the robotic PPS for the fixed-beam heavy-ion therapy system. This research aims to develop a robotic PPS for use in the Korea Heavy Ion Medical Accelerator (KHIMA) system, which is under development at the Korea Institute of Radiological & Medical Sciences (KIRAMS). In particular, we select constraints and criteria that will be used for designing and evaluating the robotic PPS through full consultation with KIRAMS. In accordance with the constraints and criteria, we develop a 6-DOF serial-link robotic arm that consists of six revolute joints for the robotic PPS, where the robotic arm covers the upper body of a patient as a treatment area and achieves a 15 ° roll and pitch angle in the treatment area without any collision. Various preliminary experiments confirm that the robotic PPS can meet all criteria for extension of the limited irradiation angle range in the treatment area and has a positioning repeatability of 0.275 mm.

  14. Coordinated coupling control of tethered space robot using releasing characteristics of space tether

    NASA Astrophysics Data System (ADS)

    Huang, Panfeng; Zhang, Fan; Xu, Xiudong; Meng, Zhongjie; Liu, Zhengxiong; Hu, Yongxin

    2016-04-01

    Tethered space robot (TSR) is a new concept of space robot, which is released from the platform satellite, and retrieved via connected tether after space debris capture. In this paper, we propose a new coordinate control scheme for optimal trajectory and attitude tracking, and use releasing motor torque to instead the tension force, since it is difficult to track in practical. Firstly, the 6-DOF dynamics model of TSR is derived, in which the dynamics of tether releasing system is taken into account. Then, we propose and design the coordinated coupled controller, which is composed of a 6-DOF sliding mode controller and a PD controller tether's releasing. Thrust is treated as control input of the 6-DOF sliding mode controller to control the in-plane and out-of-plane angle of the tether and attitude angles of the TSR. The torque of releasing motor is used as input of PD controller, which controls the length rate of space tether. After the verification of the control scheme, finally, the simulation experiment is presented in order to validate the effectiveness of this control method. The results show that TSR can track the optimal approaching trajectory accurately. Simultaneously, the attitude angles can be changed to the desired attitude angles in control period, and the terminal accuracy is ±0.3°.

  15. Combined Feature Based and Shape Based Visual Tracker for Robot Navigation

    NASA Technical Reports Server (NTRS)

    Deans, J.; Kunz, C.; Sargent, R.; Park, E.; Pedersen, L.

    2005-01-01

    We have developed a combined feature based and shape based visual tracking system designed to enable a planetary rover to visually track and servo to specific points chosen by a user with centimeter precision. The feature based tracker uses invariant feature detection and matching across a stereo pair, as well as matching pairs before and after robot movement in order to compute an incremental 6-DOF motion at each tracker update. This tracking method is subject to drift over time, which can be compensated by the shape based method. The shape based tracking method consists of 3D model registration, which recovers 6-DOF motion given sufficient shape and proper initialization. By integrating complementary algorithms, the combined tracker leverages the efficiency and robustness of feature based methods with the precision and accuracy of model registration. In this paper, we present the algorithms and their integration into a combined visual tracking system.

  16. Robotics for Human Exploration

    NASA Technical Reports Server (NTRS)

    Fong, Terrence; Deans, Mathew; Bualat, Maria

    2013-01-01

    Robots can do a variety of work to increase the productivity of human explorers. Robots can perform tasks that are tedious, highly repetitive or long-duration. Robots can perform precursor tasks, such as reconnaissance, which help prepare for future human activity. Robots can work in support of astronauts, assisting or performing tasks in parallel. Robots can also perform "follow-up" work, completing tasks designated or started by humans. In this paper, we summarize the development and testing of robots designed to improve future human exploration of space.

  17. Development and enhancement of mobile robot arms for EOD applications

    NASA Astrophysics Data System (ADS)

    Berkemeier, Matthew; Poulson, Eric; Aston, Eric; Johnston, Josh; Smith, Brian

    2008-04-01

    Autonomous Solutions has multiple projects involving mobile robot arms for EOD applications. This paper will describe 3 such projects. In the first, a 5 DOF robot arm of our own design is mounted on a 4-wheeled omni-directional platform. The arm is capable of lifting 100 pounds at close to full extension, and it can lift significantly more at shorter distances. The operator can specify either individual joint control or "fly the gripper" control, where the individual joint velocities are automatically calculated in response to commanded gripper velocities. In the second project, 3D data of a scene of interest is gathered and then presented to the EOD technician, along with a representation of the arm. The technician can then rotate the scene and arm to obtain the best possible view for the task. In the final project, a 3 DOF arm will be mounted to an omni-directional platform. The arm and platform will be treated as a single 6 DOF manipulator, and the operator will specify 6 DOF gripper velocity commands using a 6-axis input device, such as those used for solid modeling programs.

  18. 3-D Visualization on Workspace of Parallel Manipulators

    NASA Astrophysics Data System (ADS)

    Tanaka, Yoshito; Yokomichi, Isao; Ishii, Junko; Makino, Toshiaki

    In parallel mechanisms, the form and volume of workspace also change variously with the attitude of a platform. This paper presents a method to search for the workspace of parallel mechanisms with 6-DOF and 3D visualization of the workspace. Workspace is a search for the movable range of the central point of a platform when it moves with a given orientation. In order to search workspace, geometric analysis based on inverse kinematics is considered. Plots of 2D of calculations are compared with those measured by position sensors. The test results are shown to have good agreement with simulation results. The workspace variations are demonstrated in terms of 3D and 2D plots for prototype mechanisms. The workspace plots are created with OpenGL and Visual C++ by implementation of the algorithm. An application module is developed, which displays workspace of the mechanism in 3D images. The effectiveness and practicability of 3D visualization on workspace are successfully demonstrated by 6-DOF parallel mechanisms.

  19. Design of a surgical robot with dynamic vision field control for Single Port Endoscopic Surgery.

    PubMed

    Kobayashi, Yo; Sekiguchi, Yuta; Tomono, Yu; Watanabe, Hiroki; Toyoda, Kazutaka; Konishi, Kozo; Tomikawa, Morimasa; Ieiri, Satoshi; Tanoue, Kazuo; Hashizume, Makoto; Fujie, Masaktsu G

    2010-01-01

    Recently, a robotic system was developed to assist Single Port Endoscopic Surgery (SPS). However, the existing system required a manual change of vision field, hindering the surgical task and increasing the degrees of freedom (DOFs) of the manipulator. We proposed a surgical robot for SPS with dynamic vision field control, the endoscope view being manipulated by a master controller. The prototype robot consisted of a positioning and sheath manipulator (6 DOF) for vision field control, and dual tool tissue manipulators (gripping: 5DOF, cautery: 3DOF). Feasibility of the robot was demonstrated in vitro. The "cut and vision field control" (using tool manipulators) is suitable for precise cutting tasks in risky areas while a "cut by vision field control" (using a vision field control manipulator) is effective for rapid macro cutting of tissues. A resection task was accomplished using a combination of both methods.

  20. Robotic Vehicle

    NASA Technical Reports Server (NTRS)

    1994-01-01

    A commercially available ANDROS Mark V-A robot was used by Jet Propulsion Laboratory (JPL) as the departure point in the development of the HAZBOT III, a prototype teleoperated mobile robot designed for response to emergencies. Teleoperated robots contribute significantly to reducing human injury levels by performing tasks too hazardous for humans. ANDROS' manufacturer, REMOTEC, Inc., in turn, adopted some of the JPL concepts, particularly the control panel. HAZBOT III has exceptional mobility, employs solid state electronics and brushless DC motors for safer operation, and is designed so combustible gases cannot penetrate areas containing electronics and motors. Other features include the six-degree-of-freedom manipulator, the 30-pound squeeze force parallel jaw gripper and two video cameras, one for general viewing and navigation and the other for manipulation/grasping.

  1. Simulation of cooperating robot manipulators on a mobile platform

    NASA Technical Reports Server (NTRS)

    Murphy, Stephen H.; Wen, John Ting-Yung; Saridis, George N.

    1991-01-01

    The dynamic equations of motion are presented for two or more cooperating manipulators on a freely moving mobile platform. The system of cooperating robot manipulators forms a closed kinematic chain where the force of interaction must be included in the formulation of robot and platform dynamics. The formulation includes the full dynamic interactions from arms to platform and arm tip to arm tip, and the possible translation and rotation of the platform. The equations of motion are shown to be identical in structure to the fixed-platform cooperative manipulator dynamics. The number of DOFs of the system is sufficiently large to make recursive dynamic calculation methods potentially more efficient than closed-form solutions. A complete simulation with two 6-DOF manipulators of a free-floating platform is presented along a with a multiple-arm controller to position the common load.

  2. The servicing aid tool: A teleoperated robotics system for space applications

    NASA Technical Reports Server (NTRS)

    Dorman, Keith W.; Pullen, John L.; Keksz, William O.; Eismann, Paul H.; Kowalski, Keith A.; Karlen, James P.

    1994-01-01

    The Servicing Aid Tool (SAT) is a teleoperated, force-reflecting manipulation system designed for use on the Space Shuttle. The system will assist Extravehicular Activity (EVA) servicing of spacecraft such as the Hubble Space Telescope. The SAT stands out from other robotics development programs in that special attention was given to provide a low-cost, space-qualified design which can easily and inexpensively be reconfigured and/or enhanced through the addition of existing NASA funded technology as that technology matures. SAT components are spaceflight adaptations of existing ground-based designs from Robotics Research Corporation (RRC), the leading supplier of robotics systems to the NASA and university research community in the United States. Fairchild Space is the prime contractor and provides the control electronics, safety system, system integration, and qualification testing. The manipulator consists of a 6-DOF Slave Arm mounted on a 1-DOF Positioning Link in the shuttle payload bay. The Slave Arm is controlled via a highly similar, 6-DOF, force-reflecting Master Arm from Schilling Development, Inc. This work is being performed under contract to the Goddard Space Flight Center Code, Code 442, Hubble Space Telescope Flight Systems and Servicing Project.

  3. Exploratorium: Robots.

    ERIC Educational Resources Information Center

    Brand, Judith, Ed.

    2002-01-01

    This issue of Exploratorium Magazine focuses on the topic robotics. It explains how to make a vibrating robotic bug and features articles on robots. Contents include: (1) "Where Robot Mice and Robot Men Run Round in Robot Towns" (Ray Bradbury); (2) "Robots at Work" (Jake Widman); (3) "Make a Vibrating Robotic Bug" (Modesto Tamez); (4) "The Robot…

  4. Robotic surgery

    MedlinePlus

    Robot-assisted surgery; Robotic-assisted laparoscopic surgery; Laparoscopic surgery with robotic assistance ... computer station and directs the movements of a robot. Small surgical tools are attached to the robot's ...

  5. Design and Development of an Automatic Tool Changer for an Articulated Robot Arm

    NASA Astrophysics Data System (ADS)

    Ambrosio, H.; Karamanoglu, M.

    2014-07-01

    In the creative industries, the length of time between the ideation stage and the making of physical objects is decreasing due to the use of CAD/CAM systems and adicitive manufacturing. Natural anisotropic materials, such as solid wood can also be transformed using CAD/CAM systems, but only with subtractive processes such as machining with CNC routers. Whilst some 3 axis CNC routing machines are affordable to buy and widely available, more flexible 5 axis routing machines still present themselves as a too big investment for small companies. Small refurbished articulated robots can be a cheaper alternative but they require a light end-effector. This paper presents a new lightweight tool changer that converts a small 3kg payload 6 DOF robot into a robot apprentice able to machine wood and similar soft materials.

  6. Adaptive control of space-based robot manipulators

    NASA Technical Reports Server (NTRS)

    Walker, Michael W.; Wee, Liang-Boon

    1991-01-01

    A control method is presented that achieves globally stable trajectory tracking in the presence of uncertainties in the inertial parameters of the system. The 15-DOF system dynamics are divided into two components: a 9-DOF invertible portion and 6-DOF noninvertible portion. A controller is then designed to achieve trajectory tracking of the invertible portion of the system, which consists of the manipulator-joint positions and the orientation of the base. The motion of the noninvertible portion is bounded but otherwise unspecified. This portion of the system consists of the position of the robot's base and the position of the reaction wheels. A simulation is presented to demonstrate the effectiveness of the controller. A quadratic polynomial is used to generate the desired trajectory to illustrate the trajectory-tracking capability of the controller.

  7. 1999 IEEE international conference on robotics and automation

    SciTech Connect

    1999-07-01

    Topics covered in this conference include: biped robots; underwater vehicles; robot planning and programming for assembly; discrete event control of mobile robot maneuvering; navigation in unknown environment; biped robots; underwater vehicles; robot planning and programming for assembly; discrete event control of manufacturing systems; motion planning; robot control; actuator; teleoperation; force and position control; contact and grasping control; visual servo control; tactile sensing; mobile robots and applications; sensor-based navigation; underwater robotics; sensing, navigation and control; flexible manipulators; task scheduling; actuators and joint actuation; teleoperation; sensor-based teleoperation; contact geometry; sonar-based sensing; mobile robot-environment interaction; mobile robot motion planning; biology-inspired methods; service and underwater robots; manufacturing planning and scheduling; constraint and nonholonomic system; fault-tolerant robots; parallel manipulators; dexterous manipulation; computer vision in manufacturing; contact sensing; mobile robot field applications; flexible robots; fuzzy control; and more.

  8. Control of industrial robots for hardware-in-the-loop simulation of satellite docking

    NASA Astrophysics Data System (ADS)

    Ma, Ou; Zebenay, Melak; Boge, Toralf

    2011-06-01

    One of the most challenging and risky missions for spacecraft is to perform Rendezvous and Docking (RvD) autonomously in space. To ensure a safe and reliable operation, such a mission must be carefully designed and thoroughly verified before a real space mission can be launched. This paper describes the impact-contact dynamics simulation capability of a new, robotics-based, hardware-in-the-loop (HIL) RvD simulation facility which uses two industrial robots to simulate 6-DOF dynamic maneuvering of two docking satellites. The facility is capable of physically simulating the final approaching within 25-meter range and the entire docking/capturing process in a satellite on-orbit servicing mission. The paper briefly discusses the difficulties of using industrial robots for HIL contact dynamics simulation and how these problems are solved. Admittance control strategy is proposed to control the robotic system to make the robot dynamically behave like the spacecraft during a physical interception. The control strategy works as an outer loop on the top of the existing control system of the industrial robot and hence, it does not require altering the joint control hardware and software which are inaccessible for an industrial robot. A simulation study has shown that the methodology can accurately simulate the impact-contact dynamics behavior of the spacecraft in a docking operation.

  9. The Goddard Space Flight Center (GSFC) robotics technology testbed

    NASA Technical Reports Server (NTRS)

    Schnurr, Rick; Obrien, Maureen; Cofer, Sue

    1989-01-01

    Much of the technology planned for use in NASA's Flight Telerobotic Servicer (FTS) and the Demonstration Test Flight (DTF) is relatively new and untested. To provide the answers needed to design safe, reliable, and fully functional robotics for flight, NASA/GSFC is developing a robotics technology testbed for research of issues such as zero-g robot control, dual arm teleoperation, simulations, and hierarchical control using a high level programming language. The testbed will be used to investigate these high risk technologies required for the FTS and DTF projects. The robotics technology testbed is centered around the dual arm teleoperation of a pair of 7 degree-of-freedom (DOF) manipulators, each with their own 6-DOF mini-master hand controllers. Several levels of safety are implemented using the control processor, a separate watchdog computer, and other low level features. High speed input/output ports allow the control processor to interface to a simulation workstation: all or part of the testbed hardware can be used in real time dynamic simulation of the testbed operations, allowing a quick and safe means for testing new control strategies. The NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) hierarchical control scheme, is being used as the reference standard for system design. All software developed for the testbed, excluding some of simulation workstation software, is being developed in Ada. The testbed is being developed in phases. The first phase, which is nearing completion, and highlights future developments is described.

  10. Robot and robot system

    NASA Technical Reports Server (NTRS)

    Behar, Alberto E. (Inventor); Marzwell, Neville I. (Inventor); Wall, Jonathan N. (Inventor); Poole, Michael D. (Inventor)

    2011-01-01

    A robot and robot system that are capable of functioning in a zero-gravity environment are provided. The robot can include a body having a longitudinal axis and having a control unit and a power source. The robot can include a first leg pair including a first leg and a second leg. Each leg of the first leg pair can be pivotally attached to the body and constrained to pivot in a first leg pair plane that is substantially perpendicular to the longitudinal axis of the body.

  11. Concurrent programming and robotics

    SciTech Connect

    Cox, I.J.; Gehani, N.H.

    1989-04-01

    Many current robot systems exhibit a significant degree of concurrency, doing many activities in parallel. Future sensor-based robots are expected to exhibit even more concurrency. Programs to control such robots are characterized by the need to wait for external events and/or handle interrupts, deal with concurrent activities, synchronize actions with external events, and communicate with other robots and processes. In this paper, the authors focus on the advantages of concurrent programming for robotics and suggest that a general-purpose language with the right facilities is a good vehicle for robot programming. In this context they discuss Concurrent C, an upward-compatible extension of the C language that provides high-level concurrent programming facilities. They give an historical perspective of concurrent programming followed by a brief description of Concurrent C and how Concurrent C programs communicate with robots and devices. They show by examples how Concurrent C simplifies writing robot programs. Of specific interest are the process interaction and related interrupt handling facilities.

  12. Parallel Implicit Runge-Kutta Methods Applied to Coupled Orbit/Attitude Propagation

    NASA Astrophysics Data System (ADS)

    Hatten, Noble; Russell, Ryan P.

    2016-12-01

    A variable-step Gauss-Legendre implicit Runge-Kutta (GLIRK) propagator is applied to coupled orbit/attitude propagation. Concepts previously shown to improve efficiency in 3DOF propagation are modified and extended to the 6DOF problem, including the use of variable-fidelity dynamics models. The impact of computing the stage dynamics of a single step in parallel is examined using up to 23 threads and 22 associated GLIRK stages; one thread is reserved for an extra dynamics function evaluation used in the estimation of the local truncation error. Efficiency is found to peak for typical examples when using approximately 8 to 12 stages for both serial and parallel implementations. Accuracy and efficiency compare favorably to explicit Runge-Kutta and linear-multistep solvers for representative scenarios. However, linear-multistep methods are found to be more efficient for some applications, particularly in a serial computing environment, or when parallelism can be applied across multiple trajectories.

  13. Simulation for optimal design of hand-held surgical robots.

    PubMed

    Zahraee, Ali Hassan; Szewczyk, Jerome; Morel, Guillaume

    2009-01-01

    Hand-held surgical robots are manipulators with dexterous effectors to be used by surgeons in minimally invasive surgery and especially in laparoscopy. Mechanical manipulators for laparoscopy have appeared on the markets in recent years with various interfaces and dexterities. 2 examples are RealHand and Laparo-Angle. The question of which interface and control mode is the best has not been answered yet. Also, the effector kinematics has not been studied much. We have made a simulator to study the robot's interface, control mode and kinematics to design a hand-held surgical robot for laparoscopic surgery. We asked test subjects to use the simulator and try to make sutures in a virtual environment. Users opinion is that a joystick as interface is easier to use, compared to a jointed interface translating hand's orientation to that of the effector. It appears that a 6 DOF effector coupled to the shaft is necessary and dexterous enough to make sutures in different angles.

  14. Adaptive parallel logic networks

    NASA Technical Reports Server (NTRS)

    Martinez, Tony R.; Vidal, Jacques J.

    1988-01-01

    Adaptive, self-organizing concurrent systems (ASOCS) that combine self-organization with massive parallelism for such applications as adaptive logic devices, robotics, process control, and system malfunction management, are presently discussed. In ASOCS, an adaptive network composed of many simple computing elements operating in combinational and asynchronous fashion is used and problems are specified by presenting if-then rules to the system in the form of Boolean conjunctions. During data processing, which is a different operational phase from adaptation, the network acts as a parallel hardware circuit.

  15. Generation of an Optimal Gait Trajectory for Biped Robots Using a Genetic Algorithm

    NASA Astrophysics Data System (ADS)

    Park, Jong Hyeon; Choi, Moosung

    This paper proposes a method that minimizes the energy consumption in the locomotion of a biped robot. A real-coded genetic algorithm is employed in order to search for the optimal locomotion pattern, and at the same time the optimal locations of the mass centers of the links that compose the biped robot. Since many of the essential characteristics of the human walking motion can be captured with a seven-link planar biped walking in the saggital plane, a 6-DOF biped robot that consists of seven links is used as the model used in the work. For trajectories of the robot in a single stride, fourth-order polynomials are used as their basis functions to approximate the locomotion gait. The coefficients of the polynomials are defined as design variables. For the optimal locations of the mass centers of the links, three variables are added to the design variables under the assumption that the left and right legs are identical. Simulations were performed to compare locomotion trajectories obtained with the genetic algorithm and the one obtained with the gravity-compensated inverted pendulum mode (GCIPM). They show that the proposed trajectory with the optimized mass centers significantly reduces the energy consumption, indicating that the proposed optimized method is a valuable tool in the design of biped robots.

  16. CASSY Robot

    NASA Astrophysics Data System (ADS)

    Pittman, Anna; Wright, Ann; Rice, Aaron; Shyaka, Claude

    2014-03-01

    The CASSY Robot project involved two square robots coded in RobotC. The goal was to code a robot to do a certain set of tasks autonomously. To begin with, our task was to code the robot so that it would roam a certain area, marked off by black tape. When the robot hit the black tape, it knew to back up and turn around. It was able to do this thanks to the light sensor that was attached to the bottom of the robot. Also, whenever the robot hit an obstacle, it knew to stop, back up, and turn around. This was primarily to prevent the robot from hurting itself if it hit an obstacle. This was accomplished by using touch sensors set up as bumpers. Once that was accomplished, we attached sonar sensors and created code so that one robot was able to find and track the other robot in a sort of intruder/police scenario. The overall goal of this project was to code the robot so that we can test it against a robot coded exactly the same, but using Layered Mode Selection Logic. Professor.

  17. The universal robot

    NASA Technical Reports Server (NTRS)

    Moravec, Hans

    1993-01-01

    Our artifacts are getting smarter, and a loose parallel with the evolution of animal intelligence suggests one future course for them. Computerless industrial machinery exhibits the behavioral flexibility of single-celled organisms. Today's best computer-controlled robots are like the simpler invertebrates. A thousand-fold increase in computer power in the next decade should make possible machines with reptile-like sensory and motor competence. Properly configured, such robots could do in the physical world what personal computers now do in the world of data - act on our behalf as literal-minded slaves. Growing computer power over the next half-century will allow this reptile stage to be surpassed, in stages producing robots that learn like mammals, model their world like primates, and eventually reason like humans. Depending on your point of view, humanity will then have produced a worthy successor, or transcended some of its inherited limitations and so transformed itself into something quite new.

  18. The universal robot

    NASA Astrophysics Data System (ADS)

    Moravec, Hans

    1993-12-01

    Our artifacts are getting smarter, and a loose parallel with the evolution of animal intelligence suggests one future course for them. Computerless industrial machinery exhibits the behavioral flexibility of single-celled organisms. Today's best computer-controlled robots are like the simpler invertebrates. A thousand-fold increase in computer power in the next decade should make possible machines with reptile-like sensory and motor competence. Properly configured, such robots could do in the physical world what personal computers now do in the world of data - act on our behalf as literal-minded slaves. Growing computer power over the next half-century will allow this reptile stage to be surpassed, in stages producing robots that learn like mammals, model their world like primates, and eventually reason like humans. Depending on your point of view, humanity will then have produced a worthy successor, or transcended some of its inherited limitations and so transformed itself into something quite new.

  19. Control of robot dynamics using acceleration control

    NASA Technical Reports Server (NTRS)

    Workman, G. L.; Prateru, S.; Li, W.; Hinman, Elaine

    1992-01-01

    Acceleration control of robotic devices can provide improvements to many space-based operations using flexible manipulators and to ground-based operations requiring better precision and efficiency than current industrial robots can provide. This paper reports on a preliminary study of acceleration measurement on robotic motion during parabolic flights on the NASA KC-135 and a parallel study of accelerations with and without gravity arising from computer simulated motions using TREETOPS software.

  20. Army Robotics

    DTIC Science & Technology

    2009-10-07

    Army Robotics 07 October 2009 Dr. Grant Gerhart, Senior Research Scientist Bernard Theisen, Joint Center for Robotics DISTRIBUTION STATEMENT A... Robots 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Grant Gerhart; Bernard Theisen 5d. PROJECT NUMBER 5e. TASK...CBRNE • IED Defeat Systems • Disarm / Disrupt • Reconnaissance • Investigation • Explosive Sniffer • Common Robotic Kit • EOD • Convoy • Log

  1. Space Robotics

    DTIC Science & Technology

    1982-08-01

    ACCESSION NO 3. RECIPIENTS CATALOG NUIA3.R CMU-RI-TR-82-10 I4 1 (. 4. ;,;-LL (and Sublitle) S. TYPE OF REPORT & PERIOD CovEREO SPACE ROBOTICS Interim... Robotics Institute Pittsburgh, PA. 15213 It. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Office of Naval Research -August 1982 Arlington, VA 22217...SXnet.eE . Space Robotics Richard E. Korf Department of Computer Science and The Robotics Institute Carnegie-Mellon University Pittsburgh, Oetusylvania

  2. TARDEC Robotics

    DTIC Science & Technology

    2010-01-12

    unclassified TARDEC Robotics Dr. James L. Overholt Director, Joint Center for Robotics US Army TARDEC Report Documentation Page Form ApprovedOMB No...COVERED - 4. TITLE AND SUBTITLE TARDEC Robotics 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) James L. Overholt... Robotics , Network and Control Components with a Focus on Customer Driven Requirements to Provide Full System Solutions to the War Fighter Technology

  3. (Robotic hands)

    SciTech Connect

    Mann, R.C.

    1988-09-23

    The traveler attended the International Workshop on Robot Hands at the Palace Hotel in Dubrovnik, Yugoslavia. The traveler presented a lecture on An integrated sensor system for the ORNL mobile robot.'' The traveler obtained important information on current R D efforts in multi-fingered robot hands and object recognition using touch sensing.

  4. Basic Robotics.

    ERIC Educational Resources Information Center

    Mullen, Frank

    This curriculum outline consists of instructional materials and information concerning resources for use in teaching a course in robotics. Addressed in the individual sections of the outline are the following topics: the nature of an industrial robot; the parts of an industrial robot (the manipulator, the power structure, and the control system);…

  5. Industrial Robots.

    ERIC Educational Resources Information Center

    Reed, Dean; Harden, Thomas K.

    Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

  6. Computational motor control in humans and robots.

    PubMed

    Schaal, Stefan; Schweighofer, Nicolas

    2005-12-01

    Computational models can provide useful guidance in the design of behavioral and neurophysiological experiments and in the interpretation of complex, high dimensional biological data. Because many problems faced by the primate brain in the control of movement have parallels in robotic motor control, models and algorithms from robotics research provide useful inspiration, baseline performance, and sometimes direct analogs for neuroscience.

  7. Parametric optimization in virtual prototyping environment of the control device for a robotic system used in thin layers deposition

    NASA Astrophysics Data System (ADS)

    Enescu (Balaş, M. L.; Alexandru, C.

    2016-08-01

    The paper deals with the optimal design of the control system for a 6-DOF robot used in thin layers deposition. The optimization is based on parametric technique, by modelling the design objective as a numerical function, and then establishing the optimal values of the design variables so that to minimize the objective function. The robotic system is a mechatronic product, which integrates the mechanical device and the controlled operating device.The mechanical device of the robot was designed in the CAD (Computer Aided Design) software CATIA, the 3D-model being then transferred to the MBS (Multi-Body Systems) environment ADAMS/View. The control system was developed in the concurrent engineering concept, through the integration with the MBS mechanical model, by using the DFC (Design for Control) software solution EASY5. The necessary angular motions in the six joints of the robot, in order to obtain the imposed trajectory of the end-effector, have been established by performing the inverse kinematic analysis. The positioning error in each joint of the robot is used as design objective, the optimization goal being to minimize the root mean square during simulation, which is a measure of the magnitude of the positioning error varying quantity.

  8. Rapid optimization of tension distribution for cable-driven parallel manipulators with redundant cables

    NASA Astrophysics Data System (ADS)

    Ouyang, Bo; Shang, Weiwei

    2016-03-01

    The solution of tension distributions is infinite for cable-driven parallel manipulators(CDPMs) with redundant cables. A rapid optimization method for determining the optimal tension distribution is presented. The new optimization method is primarily based on the geometry properties of a polyhedron and convex analysis. The computational efficiency of the optimization method is improved by the designed projection algorithm, and a fast algorithm is proposed to determine which two of the lines are intersected at the optimal point. Moreover, a method for avoiding the operating point on the lower tension limit is developed. Simulation experiments are implemented on a six degree-of-freedom(6-DOF) CDPM with eight cables, and the results indicate that the new method is one order of magnitude faster than the standard simplex method. The optimal distribution of tension distribution is thus rapidly established on real-time by the proposed method.

  9. Parallel Assembly of LIGA Components

    SciTech Connect

    Christenson, T.R.; Feddema, J.T.

    1999-03-04

    In this paper, a prototype robotic workcell for the parallel assembly of LIGA components is described. A Cartesian robot is used to press 386 and 485 micron diameter pins into a LIGA substrate and then place a 3-inch diameter wafer with LIGA gears onto the pins. Upward and downward looking microscopes are used to locate holes in the LIGA substrate, pins to be pressed in the holes, and gears to be placed on the pins. This vision system can locate parts within 3 microns, while the Cartesian manipulator can place the parts within 0.4 microns.

  10. Design of a small animal biopsy robot.

    PubMed

    Bebek, Ozkan; Hwang, Myun Joong; Fei, Baowei; Cavusoglu, M

    2008-01-01

    Small animals are widely used in biomedical research studies. They have compact anatomy and small organs. Therefore it is difficult to perceive tumors or cells and perform biopsies manually. Robotics technology offers a convenient and reliable solution for accurate needle insertion. In this paper, a novel 5 degrees of freedom (DOF) robot design for inserting needles into small animal subjects is proposed. The design has a compact size, is light weight, and has high resolution. Parallel mechanisms are used in the design for stable and reliable operation. The proposed robot has two gimbal joints that carry the needle mechanism. The robot can realize dexterous alignment of the needle before insertion.

  11. Robot tongues in space: continuum surfaces for robotic grasping and manipulation

    NASA Astrophysics Data System (ADS)

    Cohen, Caleb; Hiott, Brandon; Kapadia, Apoorva D.; Walker, Ian D.

    2016-05-01

    In this paper, we introduce a novel, continuously bending "robot tongue." The tongue replaces the existing parallel jaw gripper at the end of a KUKA industrial robot manipulator. The resulting system augments the precise positioning of the KUKA with unique capabilities for adaptive grasping afforded by the new robot tongue. We demonstrate the ability of the system to grasp and manipulate objects over a wide range of scales and geometries and evaluate the potential for use of such tongues in various applications.

  12. TARDEC Robotics

    DTIC Science & Technology

    2011-03-01

    TARDEC Robotics Dr. Greg Hudas Greg.hudas@us.army.mil UNCLASSIFIED: Dist A. Approved for public release Report Documentation Page Form ApprovedOMB...COVERED - 4. TITLE AND SUBTITLE TARDEC Robotics 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Dr. Greg Hudas...ANSI Std Z39-18 Excellence in Robotics Outreach & University Shaping Requirements Building Modeling & Simulation Component Development International

  13. ROBOT WRITING,

    DTIC Science & Technology

    Technical writers who are hypnotized by the mechanical metaphor inevitably produce robot writing - a separate language, distantly related to the...prose of Darwin, Huxley, Jeans, and Einstein. Where they were clear, fresh, and graceful, the robot writer is hard, dull, and clumsy. Where they were...merely human, the robot writer is infallible, prefabricated, impersonal, and irresponsible. These four characteristics are interlinked. An example of one usually illustrates the other three.

  14. Robot Programming.

    DTIC Science & Technology

    1982-12-01

    8217AD-A127 233 ROBOT PROGRRMMING(U) MASSACHUSETTS INST OFGTECHi/ CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB T LOZANO-PEREZ UNCLASSIFIED DC8 AI-9 N884...CATALOG NUMBER * a ~AIM 698 R a is 4. TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVERED Robot Programming Memorandum 6. PERFORMING ORG. REPORT...34R Distribution is Unlimted .. SUPPLEMENTARY NOTES None 1. KEY WORDS (Continue on r verea aide ii neeaortm and Identify by block number) *Q. Robotics

  15. Highly parallel computer architecture for robotic computation

    NASA Technical Reports Server (NTRS)

    Fijany, Amir (Inventor); Bejczy, Anta K. (Inventor)

    1991-01-01

    In a computer having a large number of single instruction multiple data (SIMD) processors, each of the SIMD processors has two sets of three individual processor elements controlled by a master control unit and interconnected among a plurality of register file units where data is stored. The register files input and output data in synchronism with a minor cycle clock under control of two slave control units controlling the register file units connected to respective ones of the two sets of processor elements. Depending upon which ones of the register file units are enabled to store or transmit data during a particular minor clock cycle, the processor elements within an SIMD processor are connected in rings or in pipeline arrays, and may exchange data with the internal bus or with neighboring SIMD processors through interface units controlled by respective ones of the two slave control units.

  16. Robotics research

    SciTech Connect

    Brady, M.; Paul, R.

    1984-01-01

    Organized around a view of robotics as ''the intelligent connection of perception to action,'' the fifty-three contributions collected in this book present leading current research in one of the fastest moving fields of artificial intelligence. Readings Include: Hand-Eye Coordination in Rope Handling; 3-D Balance Using 2-D algorithms. A Model Driven Visual Inspection Module: Stereo Vision: Complexity and Constraints; Interpretation of Contact Geometers from Force Measurement; The Utah MIT Dextrous Hand: Work in Progress; Hierarchical Nonlinear Control for Robots; VAL-11; A Robot Programming Language and Control System; Technological Barriers in Robotics: A Perspective from Industry.

  17. Hopping robot

    DOEpatents

    Spletzer, Barry L.; Fischer, Gary J.; Marron, Lisa C.; Martinez, Michael A.; Kuehl, Michael A.; Feddema, John T.

    2001-01-01

    The present invention provides a hopping robot that includes a misfire tolerant linear actuator suitable for long trips, low energy steering and control, reliable low energy righting, miniature low energy fuel control. The present invention provides a robot with hopping mobility, capable of traversing obstacles significant in size relative to the robot and capable of operation on unpredictable terrain over long range. The present invention further provides a hopping robot with misfire-tolerant combustion actuation, and with combustion actuation suitable for use in oxygen-poor environments.

  18. Coordination of two redundant robots

    NASA Technical Reports Server (NTRS)

    Tao, Jian M.; Luh, J. Y. S.

    1989-01-01

    A solution is presented for the optimal force distributions of two redundant coordinating robots. Two robots whose end-effectors firmly grasp a common inertial load form a closed-chain structure, and thus the robots must observe a set of constraint conditions on (1) the end-effector positions, orientations, linear and angular velocities and (2) the forces and torques inserted onto the end-effectors by the load. To achieve the maximum load capability, the optimal force distribution under the known posture is developed. If the robots are redundant, joint solutions may be obtained if some optimization criterion such as manipulability is imposed. The singularity, manipulability, and force ellipsoids are investigated in terms of the two manipulator Jacobian matrices. The manipulability is shown to correspond to the cascade structure, while the force ellipsoid corresponds to the parallel structure in terms of the manipulator Jacobian matrices.

  19. Brachytherapy next generation: robotic systems

    PubMed Central

    Popescu, Tiberiu; Kacsó, Alex Cristian; Pisla, Doina

    2015-01-01

    In a field dominated by external beam radiation therapy (EBRT), both the therapeutic and technical possibilities of brachytherapy (BT) are underrated, shadowed by protons and intensity modulated radiotherapy. Decreasing expertise and indications, as well as increasing lack of specific BT training for radiation therapy (RT) residents led to the real need of shortening its learning curve and making it more popular. Developing robotic BT devices can be a way to mitigate the above issues. There are many teams working at custom-made robotic BT platforms to perfect and overcome the limitations of the existing systems. This paper provides a picture of the current state-of-the-art in robotic assisted BT, as it also conveys the author's solution to the problem, a parallel robot that uses CT-guidance. PMID:26816510

  20. Parallel rendering

    NASA Technical Reports Server (NTRS)

    Crockett, Thomas W.

    1995-01-01

    This article provides a broad introduction to the subject of parallel rendering, encompassing both hardware and software systems. The focus is on the underlying concepts and the issues which arise in the design of parallel rendering algorithms and systems. We examine the different types of parallelism and how they can be applied in rendering applications. Concepts from parallel computing, such as data decomposition, task granularity, scalability, and load balancing, are considered in relation to the rendering problem. We also explore concepts from computer graphics, such as coherence and projection, which have a significant impact on the structure of parallel rendering algorithms. Our survey covers a number of practical considerations as well, including the choice of architectural platform, communication and memory requirements, and the problem of image assembly and display. We illustrate the discussion with numerous examples from the parallel rendering literature, representing most of the principal rendering methods currently used in computer graphics.

  1. A non-linear model predictive controller with obstacle avoidance for a space robot

    NASA Astrophysics Data System (ADS)

    Wang, Mingming; Luo, Jianjun; Walter, Ulrich

    2016-04-01

    This study investigates the use of the non-linear model predictive control (NMPC) strategy for a kinematically redundant space robot to approach an un-cooperative target in complex space environment. Collision avoidance, traditionally treated as a high level planning problem, can be effectively translated into control constraints as part of the NMPC. The objective of this paper is to evaluate the performance of the predictive controller in a constrained workspace and to investigate the feasibility of imposing additional constraints into the NMPC. In this paper, we reformulated the issue of the space robot motion control by using NMPC with predefined objectives under input, output and obstacle constraints over a receding horizon. An on-line quadratic programming (QP) procedure is employed to obtain the constrained optimal control decisions in real-time. This study has been implemented for a 7 degree-of-freedom (DOF) kinematically redundant manipulator mounted on a 6 DOF free-floating spacecraft via simulation studies. Real-time trajectory tracking and collision avoidance particularly demonstrate the effectiveness and potential of the proposed NMPC strategy for the space robot.

  2. The use of interactive computer vision and robot hand controllers for enhancing manufacturing safety

    NASA Technical Reports Server (NTRS)

    Marzwell, Neville I.; Jacobus, Charles J.; Peurach, Thomas M.; Mitchell, Brian T.

    1994-01-01

    Current available robotic systems provide limited support for CAD-based model-driven visualization, sensing algorithm development and integration, and automated graphical planning systems. This paper describes ongoing work which provides the functionality necessary to apply advanced robotics to automated manufacturing and assembly operations. An interface has been built which incorporates 6-DOF tactile manipulation, displays for three dimensional graphical models, and automated tracking functions which depend on automated machine vision. A set of tools for single and multiple focal plane sensor image processing and understanding has been demonstrated which utilizes object recognition models. The resulting tool will enable sensing and planning from computationally simple graphical objects. A synergistic interplay between human and operator vision is created from programmable feedback received from the controller. This approach can be used as the basis for implementing enhanced safety in automated robotics manufacturing, assembly, repair and inspection tasks in both ground and space applications. Thus, an interactive capability has been developed to match the modeled environment to the real task environment for safe and predictable task execution.

  3. A crossover pilot study evaluating the functional outcomes of two different types of robotic movement training in chronic stroke survivors using the arm exoskeleton BONES

    PubMed Central

    2013-01-01

    Background To date, the limited degrees of freedom (DOF) of most robotic training devices hinders them from providing functional training following stroke. We developed a 6-DOF exoskeleton (“BONES”) that allows movement of the upper limb to assist in rehabilitation. The objectives of this pilot study were to evaluate the impact of training with BONES on function of the affected upper limb, and to assess whether multijoint functional robotic training would translate into greater gains in arm function than single joint robotic training also conducted with BONES. Methods Twenty subjects with mild to moderate chronic stroke participated in this crossover study. Each subject experienced multijoint functional training and single joint training three sessions per week, for four weeks, with the order of presentation randomized. The primary outcome measure was the change in Box and Block Test (BBT). The secondary outcome measures were the changes in Fugl-Meyer Arm Motor Scale (FMA), Wolf Motor Function Test (WMFT), Motor Activity Log (MAL), and quantitative measures of strength and speed of reaching. These measures were assessed at baseline, after each training period, and at a 3-month follow-up evaluation session. Results Training with the robotic exoskeleton resulted in significant improvements in the BBT, FMA, WMFT, MAL, shoulder and elbow strength, and reaching speed (p < 0.05); these improvements were sustained at the 3 month follow-up. When comparing the effect of type of training on the gains obtained, no significant difference was noted between multijoint functional and single joint robotic training programs. However, for the BBT, WMFT and MAL, inequality of carryover effects were noted; subsequent analysis on the change in score between the baseline and first period of training again revealed no difference in the gains obtained between the types of training. Conclusions Training with the 6 DOF arm exoskeleton improved motor function after chronic stroke

  4. Functional impacts of exoskeleton-based rehabilitation in chronic stroke: multi-joint versus single-joint robotic training

    PubMed Central

    2013-01-01

    Stroke is a major cause of disability in the world. The activities of upper limb segments are often compromised following a stroke, impairing most daily tasks. Robotic training is now considered amongst the rehabilitation methods applied to promote functional recovery. However, the implementation of robotic devices remains a major challenge for the bioengineering and clinical community. Latest exoskeletons with multiple degrees of freedom (DOF) may become particularly attractive, because of their low apparent inertia, the multiple actuators generating large torques, and the fact that patients can move the arm in the normal wide workspace. A recent study published in JNER by Milot and colleagues underlines that training with a 6-DOF exoskeleton impacts positively on motor function in patients being in stable phase of recovery after a stroke. Also, multi-joint robotic training was not found to be superior to single-joint robotic training. Although it is often considered that rehabilitation should start from simple movements to complex functional movements as the recovery evolves, this study challenges this widespread notion whose scientific basis has remained uncertain. PMID:24354518

  5. Robotics 101

    ERIC Educational Resources Information Center

    Sultan, Alan

    2011-01-01

    Robots are used in all kinds of industrial settings. They are used to rivet bolts to cars, to move items from one conveyor belt to another, to gather information from other planets, and even to perform some very delicate types of surgery. Anyone who has watched a robot perform its tasks cannot help but be impressed by how it works. This article…

  6. Robotic Surgery

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The Automated Endoscopic System for Optimal Positioning, or AESOP, was developed by Computer Motion, Inc. under a SBIR contract from the Jet Propulsion Lab. AESOP is a robotic endoscopic positioning system used to control the motion of a camera during endoscopic surgery. The camera, which is mounted at the end of a robotic arm, previously had to be held in place by the surgical staff. With AESOP the robotic arm can make more precise and consistent movements. AESOP is also voice controlled by the surgeon. It is hoped that this technology can be used in space repair missions which require precision beyond human dexterity. A new generation of the same technology entitled the ZEUS Robotic Surgical System can make endoscopic procedures even more successful. ZEUS allows the surgeon control various instruments in its robotic arms, allowing for the precision the procedure requires.

  7. Robot Design

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Martin Marietta Aero and Naval Systems has advanced the CAD art to a very high level at its Robotics Laboratory. One of the company's major projects is construction of a huge Field Material Handling Robot for the Army's Human Engineering Lab. Design of FMR, intended to move heavy and dangerous material such as ammunition, was a triumph in CAD Engineering. Separate computer problems modeled the robot's kinematics and dynamics, yielding such parameters as the strength of materials required for each component, the length of the arms, their degree of freedom and power of hydraulic system needed. The Robotics Lab went a step further and added data enabling computer simulation and animation of the robot's total operational capability under various loading and unloading conditions. NASA computer program (IAC), integrated Analysis Capability Engineering Database was used. Program contains a series of modules that can stand alone or be integrated with data from sensors or software tools.

  8. Fast Parallel Computation Of Manipulator Inverse Dynamics

    NASA Technical Reports Server (NTRS)

    Fijany, Amir; Bejczy, Antal K.

    1991-01-01

    Method for fast parallel computation of inverse dynamics problem, essential for real-time dynamic control and simulation of robot manipulators, undergoing development. Enables exploitation of high degree of parallelism and, achievement of significant computational efficiency, while minimizing various communication and synchronization overheads as well as complexity of required computer architecture. Universal real-time robotic controller and simulator (URRCS) consists of internal host processor and several SIMD processors with ring topology. Architecture modular and expandable: more SIMD processors added to match size of problem. Operate asynchronously and in MIMD fashion.

  9. Robotic transportation.

    PubMed

    Lob, W S

    1990-09-01

    Mobile robots perform fetch-and-carry tasks autonomously. An intelligent, sensor-equipped mobile robot does not require dedicated pathways or extensive facility modification. In the hospital, mobile robots can be used to carry specimens, pharmaceuticals, meals, etc. between supply centers, patient areas, and laboratories. The HelpMate (Transitions Research Corp.) mobile robot was developed specifically for hospital environments. To reach a desired destination, Help-Mate navigates with an on-board computer that continuously polls a suite of sensors, matches the sensor data against a pre-programmed map of the environment, and issues drive commands and path corrections. A sender operates the robot with a user-friendly menu that prompts for payload insertion and desired destination(s). Upon arrival at its selected destination, the robot prompts the recipient for a security code or physical key and awaits acknowledgement of payload removal. In the future, the integration of HelpMate with robot manipulators, test equipment, and central institutional information systems will open new applications in more localized areas and should help overcome difficulties in filling transport staff positions.

  10. [Robotic surgery].

    PubMed

    Sándor, József; Haidegger, Tamás; Kormos, Katalin; Ferencz, Andrea; Csukás, Domokos; Bráth, Endre; Szabó, Györgyi; Wéber, György

    2013-10-01

    Due to the fast spread of laparoscopic cholecystectomy, surgical procedures have been changed essentially. The new techniques applied for both abdominal and thoracic procedures provided the possibility for minimally invasive access with all its advantages. Robots - originally developed for industrial applications - were retrofitted for laparoscopic procedures. The currently prevailing robot-assisted surgery is ergonomically more advantageous for the surgeon, as well as for the patient through the more precise preparative activity thanks to the regained 3D vision. The gradual decrease of costs of robotic surgical systems and development of new generations of minimally invasive devices may lead to substantial changes in routine surgical procedures.

  11. Subsumption Robotics

    DTIC Science & Technology

    1998-01-01

    Subsumption Robotics Christopher K. DeBolt Naval EOD Technology Division 2008 Stump Neck Road Indian Head, MD 20640-5070 phone: (301) 744-6850, Ext...eodmgate.navsea.navy.mil; nguyent.eodtc@eodmgate.navsea.navy.mil Helen Greiner and Polly K. Pook I.S. Robotics phone: (617) 629-0055 e-mail: helen@isr.com , pook...408) 656-3462 e-mail: healey@me.nps.navy.mil LONG-TERM GOALS Through the use of subsumption architectures, low cost, simple robots can be developed

  12. Parallel machines: Parallel machine languages

    SciTech Connect

    Iannucci, R.A. )

    1990-01-01

    This book presents a framework for understanding the tradeoffs between the conventional view and the dataflow view with the objective of discovering the critical hardware structures which must be present in any scalable, general-purpose parallel computer to effectively tolerate latency and synchronization costs. The author presents an approach to scalable general purpose parallel computation. Linguistic Concerns, Compiling Issues, Intermediate Language Issues, and hardware/technological constraints are presented as a combined approach to architectural Develoement. This book presents the notion of a parallel machine language.

  13. Software Tools for Design and Performance Evaluation of Intelligent Systems

    DTIC Science & Technology

    2004-08-01

    Self-calibration of Three-Legged Modular Reconfigurable Parallel Robots Based on Leg-End Distance Errors,” Robotica , Vol. 19, pp. 187-198. [4...9] Lintott, A. B., and Dunlop, G. R., “Parallel Topology Robot Calibration,” Robotica . [10] Vischer, P., and Clavel, R., “Kinematic Calibration...of the Parallel Delta Robot,” Robotica , Vol. 16, pp.207- 218, 1998. [11] Joshi, S.A., and Surianarayan, A., “Calibration of a 6-DOF Cable Robot Using

  14. SU-F-BRA-04: Prostate HDR Brachytherapy with Multichannel Robotic System

    SciTech Connect

    Joseph, F Maria; Podder, T; Yu, Y

    2015-06-15

    Purpose: High-dose-rate (HDR) brachytherapy is gradually becoming popular in treating patients with prostate cancers. However, placement of the HDR needles at desired locations into the patient is challenging. Application of robotic system may improve the accuracy of the clinical procedure. This experimental study is to evaluate the feasibility of using a multichannel robotic system for prostate HDR brachytherapy. Methods: In this experimental study, the robotic system employed was a 6-DOF Multichannel Image-guided Robotic Assistant for Brachytherapy (MIRAB), which was designed and fabricated for prostate seed implantation. The MIRAB has the provision of rotating 16 needles while inserting them. Ten prostate HDR brachytherapy needles were simultaneously inserted using MIRAB into a commercially available prostate phantom. After inserting the needles into the prostate phantom at desired locations, 2mm thick CT slices were obtained for dosimetric planning. HDR plan was generated using Oncetra planning system with a total prescription dose of 34Gy in 4 fractions. Plan quality was evaluated considering dose coverage to prostate and planning target volume (PTV), with 3mm margin around prostate, as well as the dose limit to the organs at risk (OARs) following the American Brachytherapy Society (ABS) guidelines. Results: From the CT scan, it is observed that the needles were inserted straight into the desired locations and they were adequately spaced and distributed for a clinically acceptable HDR plan. Coverage to PTV and prostate were about 91% (V100= 91%) and 96% (V100=96%), respectively. Dose to 1cc of urethra, rectum, and bladder were within the ABS specified limits. Conclusion: The MIRAB was able to insert multiple needles simultaneously into the prostate precisely. By controlling the MIRAB to insert all the ten utilized needles into the prostate phantom, we could achieve the robotic HDR brachytherapy successfully. Further study for assessing the system

  15. Robotic arm

    DOEpatents

    Kwech, Horst

    1989-04-18

    A robotic arm positionable within a nuclear vessel by access through a small diameter opening and having a mounting tube supported within the vessel and mounting a plurality of arm sections for movement lengthwise of the mounting tube as well as for movement out of a window provided in the wall of the mounting tube. An end effector, such as a grinding head or welding element, at an operating end of the robotic arm, can be located and operated within the nuclear vessel through movement derived from six different axes of motion provided by mounting and drive connections between arm sections of the robotic arm. The movements are achieved by operation of remotely-controllable servo motors, all of which are mounted at a control end of the robotic arm to be outside the nuclear vessel.

  16. Robotic vehicle

    DOEpatents

    Box, W.D.

    1998-08-11

    A robotic vehicle is described for travel through a conduit. The robotic vehicle includes forward and rear housings each having a hub portion, and each being provided with surface engaging mechanisms for selectively engaging the walls of the conduit such that the housings can be selectively held in stationary positions within the conduit. The surface engaging mechanisms of each housing includes a plurality of extendible appendages, each of which is radially extendible relative to the operatively associated hub portion between a retracted position and a radially extended position. The robotic vehicle also includes at least three selectively extendible members extending between the forward and rear housings, for selectively changing the distance between the forward and rear housings to effect movement of the robotic vehicle. 20 figs.

  17. Robotic vehicle

    DOEpatents

    Box, W.D.

    1997-02-11

    A robotic vehicle is described for travel through a conduit. The robotic vehicle includes forward and rear housings each having a hub portion, and each being provided with surface engaging mechanisms for selectively engaging the walls of the conduit such that the housings can be selectively held in stationary positions within the conduit. The surface engaging mechanisms of each housing includes a plurality of extendable appendages, each of which is radially extendable relative to the operatively associated hub portion between a retracted position and a radially extended position. The robotic vehicle also includes at least three selectively extendable members extending between the forward and rear housings, for selectively changing the distance between the forward and rear housings to effect movement of the robotic vehicle. 20 figs.

  18. Robotic vehicle

    DOEpatents

    Box, W. Donald

    1998-01-01

    A robotic vehicle for travel through a conduit. The robotic vehicle includes forward and rear housings each having a hub portion, and each being provided with surface engaging mechanisms for selectively engaging the walls of the conduit such that the housings can be selectively held in stationary positions within the conduit. The surface engaging mechanisms of each housing includes a plurality of extendable appendages, each of which is radially extendable relative to the operatively associated hub portion between a retracted position and a radially extended position. The robotic vehicle also includes at least three selectively extendable members extending between the forward and rear housings, for selectively changing the distance between the forward and rear housings to effect movement of the robotic vehicle.

  19. Robotic vehicle

    DOEpatents

    Box, W. Donald

    1997-01-01

    A robotic vehicle for travel through a conduit. The robotic vehicle includes forward and rear housings each having a hub portion, and each being provided with surface engaging mechanisms for selectively engaging the walls of the conduit such that the housings can be selectively held in stationary positions within the conduit. The surface engaging mechanisms of each housing includes a plurality of extendable appendages, each of which is radially extendable relative to the operatively associated hub portion between a retracted position and a radially extended position. The robotic vehicle also includes at least three selectively extendable members extending between the forward and rear housings, for selectively changing the distance between the forward and rear housings to effect movement of the robotic vehicle.

  20. Fast Parallel Computation Of Multibody Dynamics

    NASA Technical Reports Server (NTRS)

    Fijany, Amir; Kwan, Gregory L.; Bagherzadeh, Nader

    1996-01-01

    Constraint-force algorithm fast, efficient, parallel-computation algorithm for solving forward dynamics problem of multibody system like robot arm or vehicle. Solves problem in minimum time proportional to log(N) by use of optimal number of processors proportional to N, where N is number of dynamical degrees of freedom: in this sense, constraint-force algorithm both time-optimal and processor-optimal parallel-processing algorithm.

  1. Robot Rescue

    NASA Technical Reports Server (NTRS)

    Morring, Frank, Jr.

    2004-01-01

    Tests with robots and the high-fidelity Hubble Space Telescope mockup astronauts use to train for servicing missions have convinced NASA managers it may be possible to maintain and upgrade the orbiting observatory without sending a space shuttle to do the job. In a formal request last week, the agency gave bidders until July 16 to sub-mit proposals for a robotic mission to the space telescope before the end of 2007. At a minimum, the mission would attach a rocket motor to deorbit the telescope safely when its service life ends. In the best case, it would use state-of-the- art robotics to prolong its life on orbit and install new instruments. With the space shuttle off-limits for the job under strict post-Columbia safety policies set by Administrator Sean O'Keefe, NASA has designed a "straw- man" robotic mission that would use an Atlas V or Delta N to launch a 20,ooO-lb. "Hubble Robotic Vehicle" to service the telescope. There, a robotic arm would grapple it, much as the shuttle does.

  2. Handbook of industrial robotics

    SciTech Connect

    Nof, S.Y.

    1985-01-01

    This book presents papers on the application of artificial intelligence to robots used in industrial plants. Topics considered include vision systems, elements of industrial robot software, robot teaching, the off-line programming of robots, a structured programming robot language, task-level manipulator programming, expert systems, and the role of the computer in robot intelligence.

  3. Tutorial on robotics

    SciTech Connect

    Lee, C.S.G.; Gonzalez, R.C.; Fu, K.S.

    1986-01-01

    Basic fundamentals in robotics are presented in this tutorial. Topics covered are as follows: robot arm kinematics; robot arm dynamics; planning or manipulator trajectories; servo control for manipulators; force sensing and control; robot vision systems; robot programming languages; and machine intelligence and robot planning.

  4. Parallel pipelining

    SciTech Connect

    Joseph, D.D.; Bai, R.; Liao, T.Y.; Huang, A.; Hu, H.H.

    1995-09-01

    In this paper the authors introduce the idea of parallel pipelining for water lubricated transportation of oil (or other viscous material). A parallel system can have major advantages over a single pipe with respect to the cost of maintenance and continuous operation of the system, to the pressure gradients required to restart a stopped system and to the reduction and even elimination of the fouling of pipe walls in continuous operation. The authors show that the action of capillarity in small pipes is more favorable for restart than in large pipes. In a parallel pipeline system, they estimate the number of small pipes needed to deliver the same oil flux as in one larger pipe as N = (R/r){sup {alpha}}, where r and R are the radii of the small and large pipes, respectively, and {alpha} = 4 or 19/7 when the lubricating water flow is laminar or turbulent.

  5. Comparison of Workspace Reduction Between Kinematically Redundant Serial and Parallel Manipulators Under Joint Failures

    DTIC Science & Technology

    2011-03-07

    Bibliography [1] J. Carlson, R. Murphy, and A. Nelson. How UGVs physically fail in the field. IEEE Transactions on Robotics , 21(3):423 – 437, June 2005...Design, 110(1):35–41, 1988. [7] C. Gosselin and J. Angeles. Singularity analysis of closed-loop kinematic chains. IEEE Transactions on Robotics and...locked joint failures. IEEE Transactions on Robotics and Automation, 13(4):622–629, August 1997. [11] Jean-Pierre Merlet. Parallel Robots. Kluwer

  6. Motion vision for mobile robots

    NASA Astrophysics Data System (ADS)

    Herrb, Matthieu

    The problem of using computer vision in mobile robots is dealt with. The datacube specialized cards and a parallel machine using a transputer network are studied. The tracking and localization of a three dimensional object in a sequence of images is examined, using first order prediction of the motion in the image plane and verification by a maximal clique search in the graph of mutually compatible matchings. A dynamic environment modeling module, using numerical fusion between trinocular stereovision and tracking of stereo matched primitives is presented. The integration of this perception system in the control architecture of a mobile robot is examined to achieve various functions, such as vision servo motion and environment modeling. The functional units implementing vision tasks and the data exchanged with other units are outlined. Experiments realized with the mobile robot Hilare 1.5 allowed the proposed algorithms and concepts to be validated.

  7. Multiple impedance control of space free-flying robots via virtual linkages

    NASA Astrophysics Data System (ADS)

    Rastegari, Rambod; Moosavian, S. Ali A.

    2010-03-01

    Multiple impedance control (MIC) is a Model-Based algorithm that enforces a designated impedance on all cooperating manipulators, the manipulated object, and the moving base if applied on a mobile robotic system such as a space free flying robotic system. The MIC can be properly applied to manipulate a grasped object, and move it on a desired path. However, during such maneuvers, some inner forces and torques are usually produced in the object. For tuning the inner object forces, it is needed to model the inner forces/torques or their effects on the object. In this paper, a virtual linkage model is introduced to determine the inner forces using the MIC law. Also, the load distribution among the end-effectors is modeled. To this end, the MIC law is used to control both path tracking and inner forces tuning when manipulating an object. The moving object is grasped solidly with two 6 degrees of freedom (DOF) cooperating end-effectors mounted on a 6 DOF spacecraft appended with a 2 DOF antenna. An explicit dynamics model of this highly complicated 20 DOF system is derived using SPACEMAPLE, and then simulated in MATLAB. The obtained results reveal good tracking performance of the proposed MIC controller, besides tuning the object internal forces due to tension or compression forces, also torsion and bending moments.

  8. Medical robotics.

    PubMed

    Ferrigno, Giancarlo; Baroni, Guido; Casolo, Federico; De Momi, Elena; Gini, Giuseppina; Matteucci, Matteo; Pedrocchi, Alessandra

    2011-01-01

    Information and communication technology (ICT) and mechatronics play a basic role in medical robotics and computer-aided therapy. In the last three decades, in fact, ICT technology has strongly entered the health-care field, bringing in new techniques to support therapy and rehabilitation. In this frame, medical robotics is an expansion of the service and professional robotics as well as other technologies, as surgical navigation has been introduced especially in minimally invasive surgery. Localization systems also provide treatments in radiotherapy and radiosurgery with high precision. Virtual or augmented reality plays a role for both surgical training and planning and for safe rehabilitation in the first stage of the recovery from neurological diseases. Also, in the chronic phase of motor diseases, robotics helps with special assistive devices and prostheses. Although, in the past, the actual need and advantage of navigation, localization, and robotics in surgery and therapy has been in doubt, today, the availability of better hardware (e.g., microrobots) and more sophisticated algorithms(e.g., machine learning and other cognitive approaches)has largely increased the field of applications of these technologies,making it more likely that, in the near future, their presence will be dramatically increased, taking advantage of the generational change of the end users and the increasing request of quality in health-care delivery and management.

  9. Rehabilitation robotics.

    PubMed

    Krebs, H I; Volpe, B T

    2013-01-01

    This chapter focuses on rehabilitation robotics which can be used to augment the clinician's toolbox in order to deliver meaningful restorative therapy for an aging population, as well as on advances in orthotics to augment an individual's functional abilities beyond neurorestoration potential. The interest in rehabilitation robotics and orthotics is increasing steadily with marked growth in the last 10 years. This growth is understandable in view of the increased demand for caregivers and rehabilitation services escalating apace with the graying of the population. We provide an overview on improving function in people with a weak limb due to a neurological disorder who cannot properly control it to interact with the environment (orthotics); we then focus on tools to assist the clinician in promoting rehabilitation of an individual so that s/he can interact with the environment unassisted (rehabilitation robotics). We present a few clinical results occurring immediately poststroke as well as during the chronic phase that demonstrate superior gains for the upper extremity when employing rehabilitation robotics instead of usual care. These include the landmark VA-ROBOTICS multisite, randomized clinical study which demonstrates clinical gains for chronic stroke that go beyond usual care at no additional cost.

  10. Rehabilitation robotics

    PubMed Central

    KREBS, H.I.; VOLPE, B.T.

    2015-01-01

    This chapter focuses on rehabilitation robotics which can be used to augment the clinician’s toolbox in order to deliver meaningful restorative therapy for an aging population, as well as on advances in orthotics to augment an individual’s functional abilities beyond neurorestoration potential. The interest in rehabilitation robotics and orthotics is increasing steadily with marked growth in the last 10 years. This growth is understandable in view of the increased demand for caregivers and rehabilitation services escalating apace with the graying of the population. We will provide an overview on improving function in people with a weak limb due to a neurological disorder who cannot properly control it to interact with the environment (orthotics); we will then focus on tools to assist the clinician in promoting rehabilitation of an individual so that s/he can interact with the environment unassisted (rehabilitation robotics). We will present a few clinical results occurring immediately poststroke as well as during the chronic phase that demonstrate superior gains for the upper extremity when employing rehabilitation robotics instead of usual care. These include the landmark VA-ROBOTICS multisite, randomized clinical study which demonstrates clinical gains for chronic stroke that go beyond usual care at no additional cost. PMID:23312648

  11. Generic robot architecture

    DOEpatents

    Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

    2010-09-21

    The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

  12. Cooperating mobile robots

    DOEpatents

    Harrington, John J.; Eskridge, Steven E.; Hurtado, John E.; Byrne, Raymond H.

    2004-02-03

    A miniature mobile robot provides a relatively inexpensive mobile robot. A mobile robot for searching an area provides a way for multiple mobile robots in cooperating teams. A robotic system with a team of mobile robots communicating information among each other provides a way to locate a source in cooperation. A mobile robot with a sensor, a communication system, and a processor, provides a way to execute a strategy for searching an area.

  13. Robot Swarms

    NASA Technical Reports Server (NTRS)

    Morring, Frank, Jr.

    2005-01-01

    Engineers and interns at this NASA field center are building the prototype of a robotic rover that could go where no wheeled rover has gone before-into the dark cold craters at the lunar poles and across the Moon s rugged highlands-like a walking tetrahedron. With NASA pushing to meet President Bush's new exploration objectives, the robots taking shape here today could be on the Moon in a decade. In the longer term, the concept could lead to shape-shifting robot swarms designed to explore distant planetary surfaces in advance of humans. "If you look at all of NASA s projections of the future, anyone s projections of the space program, they re all rigid-body architecture," says Steven Curtis, principal investigator on the effort. "This is not rigid-body. The whole key here is flexibility and reconfigurability with a capital R."

  14. Robot Manipulators

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Space Shuttle's Remote Manipulator System (Canadarm) is a 50 foot robot arm used to deploy, retrieve or repair satellites in orbit. Initial spinoff version is designed to remove, inspect and replace large components of Ontario Hydro's CANDU nuclear reactors, which supply 50 percent of Ontario Hydro's total power reduction. CANDU robot is the first of SPAR's Remote Manipulator Systems intended for remote materials handling operations in nuclear servicing, chemical processing, smelting and manufacturing. Inco Limited used remote manipulator for remote control mining equipment to enhance safety and productivity of Inco's hardrock mining operations. System not only improves safety in a hazardous operation that costs more than a score of lives annually, it also increases productivity fourfold. Remote Manipulator System Division is also manufacturing a line of industrial robots and developing additional system for nuclear servicing, mining, defense and space operations.

  15. Robot Hand

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Robots are limited only by the dexterity of the hand. Dr. Salisbury, in conjunction with Stanford, Caltech and Jet Propulsion Laboratory, developed the Salisbury Hand which has three, three-jointed human-like fingers. The tips are covered with a resilient, high friction material for gripping. The robot hand can manipulate objects by finger motion, and adapts to different aims. Advanced software allows the hand to interpret information from fingertip sensors. Further development is expected. A company has been formed to reproduce the device; copies have been delivered to several laboratories.

  16. Robot Tools

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Mecanotron, now division of Robotics and Automation Corporation, developed a quick-change welding method called the Automatic Robotics Tool-change System (ARTS) under Marshall Space Flight Center and Rockwell International contracts. The ARTS system has six tool positions ranging from coarse sanding disks and abrasive wheels to cloth polishing wheels with motors of various horsepower. The system is used by fabricators of plastic body parts for the auto industry, by Texas Instruments for making radar domes, and for advanced composites at Aerospatiale in France.

  17. Robot gripper

    NASA Technical Reports Server (NTRS)

    Webb, Winston S. (Inventor)

    1987-01-01

    An electronic force-detecting robot gripper for gripping objects and attaching to an external robot arm is disclosed. The gripper comprises motor apparatus, gripper jaws, and electrical circuits for driving the gripper motor and sensing the amount of force applied by the jaws. The force applied by the jaws is proportional to a threshold value of the motor current. When the motor current exceeds the threshold value, the electrical circuits supply a feedback signal to the electrical control circuit which, in turn, stops the gripper motor.

  18. Computer vision-guided robotic system for electrical power lines maintenance

    NASA Astrophysics Data System (ADS)

    Tremblay, Jack; Laliberte, T.; Houde, Regis; Pelletier, Michel; Gosselin, Clement M.; Laurendeau, Denis

    1995-12-01

    The paper presents several modules of a computer vision assisted robotic system for the maintenance of live electrical power lines. The basic scene of interest is composed of generic components such as a crossarm, a power line and a porcelain insulator. The system is under the supervision of an operator which validates each subtask. The system uses a 3D range finder mounted at the end effector of a 6 dof manipulator for the acquisition of range data on the scene. Since more than one view is required to obtain enough information on the scene, a view integration procedure is applied to the data in order to merge the information in a single reference frame. A volumetric description of the scene, in this case an octree, is built using the range data. The octree is transformed into an occupancy grid which is used for avoiding collisions between the manipulator and the components of the scene during the line manipulation step. The collision avoidance module uses the occupancy grid to create a discrete electrostatic potential field representing the various goals (e.g. objects of interest) and obstacles in the scene. The algorithm takes into account the articular limits of the robot and uses a redundant manipulator to ensure that the collision avoidance constraints do not compete with the task which is to reach a given goal with the end-effector. A pose determination algorithm called Iterative Closest Point is presented. The algorithm allows to compute the pose of the various components of the scene and allows the robot to manipulate these components safely. The system has been tested on an actual scene. The manipulation was successfully implemented using a synchronized geometry range finder mounted on a PUMA 760 robot manipulator under the control of Cartool.

  19. Robotics Challenge: Cognitive Robot for General Missions

    DTIC Science & Technology

    2015-01-01

    ROBOTICS CHALLENGE: COGNITIVE ROBOT FOR GENERAL MISSIONS UNIVERSITY OF KANSAS JANUARY 2015 FINAL TECHNICAL REPORT... ROBOTICS CHALLENGE: COGNITIVE ROBOT FOR GENERAL MISSIONS 5a. CONTRACT NUMBER FA8750-12-1-0302 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 62702E...a complicated environment, a robotic system requires both high-level command facilities and low- level sensing/control mechanisms. This report

  20. Robotics in Construction.

    DTIC Science & Technology

    1986-01-01

    MICROCOPY RESOLUTION TEST CHART NATIONAL BUREAU OF STANDARDS 1963 A 0 ROBOTICS IN CONSTRUCTIONt 10 BY MICHAEL R. BROZZO A REPORT PRESENTED TO THE GRADUATE... ROBOTS AND ROBOTICS ---------------------------- 3 2.1 HISTORY ------------------------------------------- 3 CHAPTER THREE - BASIC ROBOT MOVEMENTS...CHAPTER FOUR - BASIC ROBOT COMPONENTS ------------------------ 8 4.1 GENERAL ------------------------------------------- 8 4.1.1 Manipulator

  1. Beyond Robotics

    ERIC Educational Resources Information Center

    Tally, Beth; Laverdure, Nate

    2006-01-01

    Chantilly High School Academy Robotics Team Number 612 from Chantilly, Virginia, is an award-winning team of high school students actively involved with FIRST (For Inspiration and Recognition of Science and Technology), a multinational nonprofit organization that inspires students to transform culture--making science, math, engineering and…

  2. Robotic Surgery

    ERIC Educational Resources Information Center

    Childress, Vincent W.

    2007-01-01

    The medical field has many uses for automated and remote-controlled technology. For example, if a tissue sample is only handled in the laboratory by a robotic handling system, then it will never come into contact with a human. Such a system not only helps to automate the medical testing process, but it also helps to reduce the chances of…

  3. Cooperative intelligent robotics in space III; Proceedings of the Meeting, Boston, MA, Nov. 16-18, 1992

    NASA Technical Reports Server (NTRS)

    Erickson, Jon D. (Editor)

    1992-01-01

    The present volume on cooperative intelligent robotics in space discusses sensing and perception, Space Station Freedom robotics, cooperative human/intelligent robot teams, and intelligent space robotics. Attention is given to space robotics reasoning and control, ground-based space applications, intelligent space robotics architectures, free-flying orbital space robotics, and cooperative intelligent robotics in space exploration. Topics addressed include proportional proximity sensing for telerobots using coherent lasar radar, ground operation of the mobile servicing system on Space Station Freedom, teleprogramming a cooperative space robotic workcell for space stations, and knowledge-based task planning for the special-purpose dextrous manipulator. Also discussed are dimensions of complexity in learning from interactive instruction, an overview of the dynamic predictive architecture for robotic assistants, recent developments at the Goddard engineering testbed, and parallel fault-tolerant robot control.

  4. Configuration space representation in parallel coordinates

    NASA Technical Reports Server (NTRS)

    Fiorini, Paolo; Inselberg, Alfred

    1989-01-01

    By means of a system of parallel coordinates, a nonprojective mapping from R exp N to R squared is obtained for any positive integer N. In this way multivariate data and relations can be represented in the Euclidean plane (embedded in the projective plane). Basically, R squared with Cartesian coordinates is augmented by N parallel axes, one for each variable. The N joint variables of a robotic device can be represented graphically by using parallel coordinates. It is pointed out that some properties of the relation are better perceived visually from the parallel coordinate representation, and that new algorithms and data structures can be obtained from this representation. The main features of parallel coordinates are described, and an example is presented of their use for configuration space representation of a mechanical arm (where Cartesian coordinates cannot be used).

  5. A Vision-Based Trajectory Controller for Autonomous Cleaning Robots

    NASA Astrophysics Data System (ADS)

    Gerstmayr, Lorenz; Röben, Frank; Krzykawski, Martin; Kreft, Sven; Venjakob, Daniel; Möller, Ralf

    Autonomous cleaning robots should completely cover the accessible area with minimal repeated coverage. We present a mostly visionbased navigation strategy for systematical exploration of an area with meandering lanes. The results of the robot experiments show that our approach can guide the robot along parallel lanes while achieving a good coverage with only a small proportion of repeated coverage. The proposed method can be used as a building block for more elaborated navigation strategies which allow the robot to systematically clean rooms with a complex workspace shape.

  6. Tandem mobile robot system

    DOEpatents

    Buttz, James H.; Shirey, David L.; Hayward, David R.

    2003-01-01

    A robotic vehicle system for terrain navigation mobility provides a way to climb stairs, cross crevices, and navigate across difficult terrain by coupling two or more mobile robots with a coupling device and controlling the robots cooperatively in tandem.

  7. Experiments in evolutionary synthesis of robotic neurocontrollers

    SciTech Connect

    Balakrishnan, K.; Honavar, V.

    1996-12-31

    Artificial neural networks offer an attractive paradigm for the design of behavior and control systems in robots and autonomous agents for a variety of reasons, including: ability to adapt and learn, potential for resistance to noise, faults and component failures, potential for real-time performance in dynamic environments (through massive parallelism and suitable hardware realization) etc.

  8. Robotic System

    NASA Technical Reports Server (NTRS)

    1984-01-01

    A complicated design project, successfully carried out by New York manufacturing consultant with help from NERAC, Inc., resulted in new type robotic system being marketed for industrial use. Consultant Robert Price, operating at E.S.I, Inc. in Albany, NY, sought help from NERAC to develop an automated tool for deburring the inside of 8 inch breech ring assemblies for howitzers produced by Watervliet Arsenal. NERAC conducted a search of the NASA data base and six others. From information supplied, Price designed a system consisting of a standard industrial robot arm, with a specially engineered six-axis deburring tool fitted to it. A microcomputer and computer program direct the tool on its path through the breech ring. E.S.I. markets the system to aerospace and metal cutting industries for deburring, drilling, routing and refining machined parts.

  9. Climbing robot

    NASA Astrophysics Data System (ADS)

    Kerley, James J.; May, Edward L.; Ecklund, Wayne D.

    1993-11-01

    A mobile robot for traversing any surface consisting of a number of interconnected segments, each interconnected segment having an upper 'U' frame member, a lower 'U' frame member, a compliant joint between the upper 'U' frame member and the lower 'U' frame member, a number of linear actuators between the two frame members acting to provide relative displacement between the frame members, a foot attached to the lower 'U' frame member for adherence of the segment to the surface, an inter-segment attachment attached to the upper 'U' frame member for interconnecting the segments, a power source connected to the linear actuator, and a computer/controller for independently controlling each linear actuator in each interconnected segment such that the mobile robot moves in a caterpillar like fashion.

  10. Three dialogues concerning robots in elder care.

    PubMed

    Metzler, Theodore A; Barnes, Susan J

    2014-01-01

    The three dialogues in this contribution concern 21st century application of life-like robots in the care of older adults. They depict conversations set in the near future, involving a philosopher (Dr Phonius) and a nurse (Dr Myloss) who manages care at a large facility for assisted living. In their first dialogue, the speakers discover that their quite different attitudes towards human-robot interaction parallel fundamental differences separating their respective concepts of consciousness. The second dialogue similarly uncovers deeply contrasting notions of personhood that appear to be associated with respective communities of nursing and robotics. The additional key awareness that arises in their final dialogue links applications of life-like robots in the care of older adults with potential transformations in our understandings of ourselves - indeed, in our understandings of the nature of our own humanity. This series of dialogues, therefore, appears to address a topic in nursing philosophy that merits our careful attention.

  11. Hierarchical Robot Control In A Multisensor Environment

    NASA Astrophysics Data System (ADS)

    Bhanu, Bir; Thune, Nils; Lee, Jih Kun; Thune, Mari

    1987-03-01

    Automatic recognition, inspection, manipulation and assembly of objects will be a common denominator in most of tomorrow's highly automated factories. These tasks will be handled by intelligent computer controlled robots with multisensor capabilities which contribute to desired flexibility and adaptability. The control of a robot in such a multisensor environment becomes of crucial importance as the complexity of the problem grows exponentially with the number of sensors, tasks, commands and objects. In this paper we present an approach which uses CAD (Computer-Aided Design) based geometric and functional models of objects together with action oriented neuroschemas to recognize and manipulate objects by a robot in a multisensor environment. The hierarchical robot control system is being implemented on a BBN Butterfly multi processor. Index terms: CAD, Hierarchical Control, Hypothesis Generation and Verification, Parallel Processing, Schemas

  12. Building a safe care-providing robot.

    PubMed

    Fotoohi, Leila; Gräser, Axel

    2011-01-01

    A service robot especially a care-providing robot, works in the vicinity of a human body and is sometimes even in direct contact with it. Conventional safety methods and precautions in industrial robotics are not applicable to such robots. This paper presents a safety approach for designing the safe care-providing robot FRIEND. The approach is applied in each step of design iteratively to identify and assess the potential hazards during design. The steps are explained briefly in this work. The main contribution of this paper is verification of safety requirements using the Ramadge-Wonham (RW) framework. The greater complexity of the tasks the robot will perform, the more complex is the identification of safety requirements. Use of this framework led us to analyze the requirements and verify them formally, systematically and on a modular basis. In our approach human-robot interaction (HRI) is also modeled by a set of uncontrolled events that may happen any time during operation. Subsequently the safety requirements are modified to consider these interactions. As a result the safety module behaves like a controller, running in parallel with the system, which maintains the system safe and works according to the safety requirements by enabling the admissible sequences of events.

  13. Balance Maintenance in High-Speed Motion of Humanoid Robot Arm-Based on the 6D Constraints of Momentum Change Rate

    PubMed Central

    Zhang, Da-song; Chu, Jian

    2014-01-01

    Based on the 6D constraints of momentum change rate (CMCR), this paper puts forward a real-time and full balance maintenance method for the humanoid robot during high-speed movement of its 7-DOF arm. First, the total momentum formula for the robot's two arms is given and the momentum change rate is defined by the time derivative of the total momentum. The author also illustrates the idea of full balance maintenance and analyzes the physical meaning of 6D CMCR and its fundamental relation to full balance maintenance. Moreover, discretization and optimization solution of CMCR has been provided with the motion constraint of the auxiliary arm's joint, and the solving algorithm is optimized. The simulation results have shown the validity and generality of the proposed method on the full balance maintenance in the 6 DOFs of the robot body under 6D CMCR. This method ensures 6D dynamics balance performance and increases abundant ZMP stability margin. The resulting motion of the auxiliary arm has large abundance in joint space, and the angular velocity and the angular acceleration of these joints lie within the predefined limits. The proposed algorithm also has good real-time performance. PMID:24883404

  14. Workspace Analysis and Optimization of 3-PUU Parallel Mechanism in Medicine Base on Genetic Algorithm

    PubMed Central

    Hou, Yongchao; Zhao, Yang

    2015-01-01

    A novel 3-PUU parallel robot was put forward, on which kinematic analysis was conducted to obtain its inverse kinematics solution, and on this basis, the limitations of the sliding pair and the Hooke joint on the workspace were analyzed. Moreover, the workspace was solved through the three dimensional limit search method, and then optimization analysis was performed on the workspace of this parallel robot, which laid the foundations for the configuration design and further analysis of the parallel mechanism, with the result indicated that this type of robot was equipped with promising application prospect. In addition that, the workspace after optimization can meet more requirements of patients. PMID:26628930

  15. Workspace Analysis and Optimization of 3-PUU Parallel Mechanism in Medicine Base on Genetic Algorithm.

    PubMed

    Hou, Yongchao; Zhao, Yang

    2015-01-01

    A novel 3-PUU parallel robot was put forward, on which kinematic analysis was conducted to obtain its inverse kinematics solution, and on this basis, the limitations of the sliding pair and the Hooke joint on the workspace were analyzed. Moreover, the workspace was solved through the three dimensional limit search method, and then optimization analysis was performed on the workspace of this parallel robot, which laid the foundations for the configuration design and further analysis of the parallel mechanism, with the result indicated that this type of robot was equipped with promising application prospect. In addition that, the workspace after optimization can meet more requirements of patients.

  16. Robotic real-time translational and rotational head motion correction during frameless stereotactic radiosurgery

    PubMed Central

    Liu, Xinmin; Belcher, Andrew H.; Grelewicz, Zachary; Wiersma, Rodney D.

    2015-01-01

    Purpose: To develop a control system to correct both translational and rotational head motion deviations in real-time during frameless stereotactic radiosurgery (SRS). Methods: A novel feedback control with a feed-forward algorithm was utilized to correct for the coupling of translation and rotation present in serial kinematic robotic systems. Input parameters for the algorithm include the real-time 6DOF target position, the frame pitch pivot point to target distance constant, and the translational and angular Linac beam off (gating) tolerance constants for patient safety. Testing of the algorithm was done using a 4D (XY Z + pitch) robotic stage, an infrared head position sensing unit and a control computer. The measured head position signal was processed and a resulting command was sent to the interface of a four-axis motor controller, through which four stepper motors were driven to perform motion compensation. Results: The control of the translation of a brain target was decoupled with the control of the rotation. For a phantom study, the corrected position was within a translational displacement of 0.35 mm and a pitch displacement of 0.15° 100% of the time. For a volunteer study, the corrected position was within displacements of 0.4 mm and 0.2° over 98.5% of the time, while it was 10.7% without correction. Conclusions: The authors report a control design approach for both translational and rotational head motion correction. The experiments demonstrated that control performance of the 4D robotic stage meets the submillimeter and subdegree accuracy required by SRS. PMID:26127028

  17. Robotic real-time translational and rotational head motion correction during frameless stereotactic radiosurgery

    SciTech Connect

    Liu, Xinmin; Belcher, Andrew H.; Grelewicz, Zachary; Wiersma, Rodney D.

    2015-06-15

    Purpose: To develop a control system to correct both translational and rotational head motion deviations in real-time during frameless stereotactic radiosurgery (SRS). Methods: A novel feedback control with a feed-forward algorithm was utilized to correct for the coupling of translation and rotation present in serial kinematic robotic systems. Input parameters for the algorithm include the real-time 6DOF target position, the frame pitch pivot point to target distance constant, and the translational and angular Linac beam off (gating) tolerance constants for patient safety. Testing of the algorithm was done using a 4D (XY Z + pitch) robotic stage, an infrared head position sensing unit and a control computer. The measured head position signal was processed and a resulting command was sent to the interface of a four-axis motor controller, through which four stepper motors were driven to perform motion compensation. Results: The control of the translation of a brain target was decoupled with the control of the rotation. For a phantom study, the corrected position was within a translational displacement of 0.35 mm and a pitch displacement of 0.15° 100% of the time. For a volunteer study, the corrected position was within displacements of 0.4 mm and 0.2° over 98.5% of the time, while it was 10.7% without correction. Conclusions: The authors report a control design approach for both translational and rotational head motion correction. The experiments demonstrated that control performance of the 4D robotic stage meets the submillimeter and subdegree accuracy required by SRS.

  18. Robot environment expert system

    NASA Technical Reports Server (NTRS)

    Potter, J. L.

    1985-01-01

    The Robot Environment Expert System uses a hexidecimal tree data structure to model a complex robot environment where not only the robot arm moves, but also the robot itself and other objects may move. The hextree model allows dynamic updating, collision avoidance and path planning over time, to avoid moving objects.

  19. Robot Hand Grips Cylinders Securely

    NASA Technical Reports Server (NTRS)

    Parma, George F.

    1989-01-01

    Jaws and linkage accommodate various sizes. Robot hand includes two pairs of parallel jaws that grasp rods, pipes, tubes, struts, and other long, heavy cylindrical objects. Hand features compact rotary drive and butterfly configuration simplifying approach and gripping maneuvers of robot. Parallelogram linkages maintain alignment of each jaw with other jaws. One bar of each linkage connected to one of two concentric, counterrotating shafts; rotation of shafts moves jaws in each pair toward or away from each other to grasp or release workpiece. Each jaw includes rigid gripping pad lined with rubber to give firm grip and to prevent damage to workpiece. Inner cylindrical surface (corner) of each jaw tapers off to flat sides. Enables jaw to grasp workpieces with diameters larger than or equal to twice the corner radius.

  20. Robots and manipulators

    NASA Technical Reports Server (NTRS)

    Heer, E.

    1981-01-01

    Robots are defined and described for various applications. The key feature of robots is programmability, which allows teleoperation, repair work in hazardous situations, and unsupervised operation in industrial functions. Two types of robots now exist: special purpose, with equipment for a specific task; and general purpose, which include nonservo-controlled robots, servo-controlled robots, and sensory control robots. Sensory robots are the most sophisticated, and are equipped with both internal control sensors and external sensors such as TV cameras, pressure detectors, laser range finders, etc. Sensory feedback to a central computer enables the robots to make appropriate modifications to the control program to adapt to new situations. Pattern recognition and scans for size are features of the TV sensors, and programs to develop a universal effector (hand) are outlined. Finally, robot programming in terms of manual, walkthrough, and textual methods are described, and the potential uses of robots for space and undersea construction and repair are discussed.

  1. Intuitive wireless control of a robotic arm for people living with an upper body disability.

    PubMed

    Fall, C L; Turgeon, P; Campeau-Lecours, A; Maheu, V; Boukadoum, M; Roy, S; Massicotte, D; Gosselin, C; Gosselin, B

    2015-08-01

    Assistive Technologies (ATs) also called extrinsic enablers are useful tools for people living with various disabilities. The key points when designing such useful devices not only concern their intended goal, but also the most suitable human-machine interface (HMI) that should be provided to users. This paper describes the design of a highly intuitive wireless controller for people living with upper body disabilities with a residual or complete control of their neck and their shoulders. Tested with JACO, a six-degree-of-freedom (6-DOF) assistive robotic arm with 3 flexible fingers on its end-effector, the system described in this article is made of low-cost commercial off-the-shelf components and allows a full emulation of JACO's standard controller, a 3 axis joystick with 7 user buttons. To do so, three nine-degree-of-freedom (9-DOF) inertial measurement units (IMUs) are connected to a microcontroller and help measuring the user's head and shoulders position, using a complementary filter approach. The results are then transmitted to a base-station via a 2.4-GHz low-power wireless transceiver and interpreted by the control algorithm running on a PC host. A dedicated software interface allows the user to quickly calibrate the controller, and translates the information into suitable commands for JACO. The proposed controller is thoroughly described, from the electronic design to implemented algorithms and user interfaces. Its performance and future improvements are discussed as well.

  2. Robotic Telesurgery Research

    DTIC Science & Technology

    2010-03-01

    dexterous workspace, as in the NB2.1 [5]. This robotic platform is designed specifically for Laparoendoscopic Single - Site Surgery (LESS), and consists...Laparoendoscopic Single - Site Surgery using a Multi-Functional Miniature In Vivo Robot,” The International Journal of Medical Robotics and Computer Assisted...Farritor, S.M., Oleynikov, D. “Laparoendoscopic Single - Site Surgery using a Multi-Functional Miniature In Vivo Robot,” Minimally Invasive Robotic

  3. Collaborative Robotics Design Considerations

    DTIC Science & Technology

    2004-05-06

    I~D~·L Paper Number Collaborative Robotics Design Considerations ABSTRACT As research advances individual robot capabilities, a logical...progression is the use of multiple robots to complete a task more effectively. Mission performance can be improved by the ability to allocate robots with...diverse capabilities to perform different parts of a complex task. To paraphrase [[10], there are many advantages to enabling robotic collaborative

  4. Robotic Vision for Welding

    NASA Technical Reports Server (NTRS)

    Richardson, R. W.

    1986-01-01

    Vision system for robotic welder looks at weld along axis of welding electrode. Gives robot view of most of weld area, including yet-unwelded joint, weld pool, and completed weld bead. Protected within welding-torch body, lens and fiber bundle give robot closeup view of weld in progress. Relayed to video camera on robot manipulator frame, weld image provides data for automatic control of robot motion and welding parameters.

  5. Robotic vehicle

    DOEpatents

    Box, W.D.

    1994-03-15

    A robotic vehicle is described for travel through an enclosed or partially enclosed conduit or pipe including vertical and/or horizontal conduit or pipe. The robotic vehicle comprises forward and rear housings each provided with a surface engaging mechanism for selectively engaging the walls of the conduit through which the vehicle is travelling, whereby the housings are selectively held in a stationary position within the conduit. The vehicle also includes at least three selectively extendable members, each of which defines a cavity therein. The forward end portion of each extendable member is secured to the forward housing and the rear end portion of each housing is secured to the rear housing. Each of the extendable members is independently extendable from a retracted position to an extended position upon the injection of a gas under pressure into the cavity of the extendable member such that the distance between the forward housing and the rear housing can be selectively increased. Further, each of the extendable members is independently retractable from the extended position to the retracted position upon the application of a vacuum to the cavity of the extendable member such that the distance between the forward housing and the rear housing can be selectively decreased. 11 figures.

  6. Robotic vehicle

    DOEpatents

    Box, W.D.

    1996-03-12

    A robotic vehicle is described for travel through an enclosed or partially enclosed conduit or pipe including vertical and/or horizontal conduit or pipe. The robotic vehicle comprises forward and rear housings each provided with a surface engaging mechanism for selectively engaging the walls of the conduit through which the vehicle is travelling, whereby the housings are selectively held in a stationary position within the conduit. The vehicle also includes at least three selectively extendable members, each of which defines a cavity therein. The forward end portion of each extendable member is secured to the forward housing and the rear end portion of each housing is secured to the rear housing. Each of the extendable members is independently extendable from a retracted position to an extended position upon the injection of a gas under pressure into the cavity of the extendable member such that the distance between the forward housing and the rear housing can be selectively increased. Further, each of the extendable members is independently retractable from the extended position to the retracted position upon the application of a vacuum to the cavity of the extendable member such that the distance between the forward housing and the rear housing can be selectively decreased. 14 figs.

  7. Robotic vehicle

    DOEpatents

    Box, W. Donald

    1996-01-01

    A robotic vehicle (10) for travel through an enclosed or partially enclosed conduit or pipe including vertical and/or horizontal conduit or pipe. The robotic vehicle (10) comprises forward and rear housings (32 and 12) each provided with a surface engaging mechanism for selectively engaging the walls of the conduit through which the vehicle is travelling, whereby the housings (32 and 12) are selectively held in a stationary position within the conduit. The vehicle (10) also includes at least three selectively extendable members (46), each of which defines a cavity (56) therein. The forward end portion (50) of each extendable member (46) is secured to the forward housing (32) and the rear end portion (48) of each housing is secured to the rear housing (12). Each of the extendable members (46) is independently extendable from a retracted position to an extended position upon the injection of a gas under pressure into the cavity (56) of the extendable member such that the distance between the forward housing (32 ) and the rear housing (12) can be selectively increased. Further, each of the extendable members (46) is independently retractable from the extended position to the retracted position upon the application of a vacuum to the cavity (56) of the extendable member (46) such that the distance between the forward housing (32) and the rear housing (12) can be selectively decreased.

  8. Robotic vehicle

    DOEpatents

    Box, W. Donald

    1994-01-01

    A robotic vehicle (10) for travel through an enclosed or partially enclosed conduit or pipe including vertical and/or horizontal conduit or pipe. The robotic vehicle (10) comprises forward and rear housings (32 and 12) each provided with a surface engaging mechanism for selectively engaging the walls of the conduit through which the vehicle is travelling, whereby the housings (32 and 12) are selectively held in a stationary position within the conduit. The vehicle (10) also includes at least three selectively extendable members (46), each of which defines a cavity (56) therein. The forward end portion (50) of each extendable member (46) is secured to the forward housing (32) and the rear end portion (48) of each housing is secured to the rear housing (12). Each of the extendable members (46) is independently extendable from a retracted position to an extended position upon the injection of a gas under pressure into the cavity (56) of the extendable member such that the distance between the forward housing (32 ) and the rear housing (12) can be selectively increased. Further, each of the extendable members (46) is independently retractable from the extended position to the retracted position upon the application of a vacuum to the cavity (56) of the extendable member (46) such that the distance between the forward housing (32) and the rear housing (12) can be selectively decreased.

  9. Parallel pivoting combined with parallel reduction

    NASA Technical Reports Server (NTRS)

    Alaghband, Gita

    1987-01-01

    Parallel algorithms for triangularization of large, sparse, and unsymmetric matrices are presented. The method combines the parallel reduction with a new parallel pivoting technique, control over generations of fill-ins and a check for numerical stability, all done in parallel with the work being distributed over the active processes. The parallel technique uses the compatibility relation between pivots to identify parallel pivot candidates and uses the Markowitz number of pivots to minimize fill-in. This technique is not a preordering of the sparse matrix and is applied dynamically as the decomposition proceeds.

  10. Hexapod Robot

    NASA Technical Reports Server (NTRS)

    Begody, Ericka

    2016-01-01

    The project I am working on at NASA-Johnson Space Center in Houston, TX is a hexapod robot. This project was started by various engineers at the Trick Lab. The goal of this project is to have the hexapod track a yellow ball or possibly another object from left to right and up/down. The purpose is to have it track an object like a real creature. The project will consist of using software and hardware. This project started with a hexapod robot which uses a senor bar to track a yellow ball but with a limited field of vision. The sensor bar acts as the robots "head." Two servos will be added to the hexapod to create flexion and extension of the head. The neck and head servos will have to be programmed to be added to the original memory map of the existing servos. I will be using preexisting code. The main programming language that will be used to add to the preexisting code is C++. The trick modeling and simulation software will also be used in the process to improve its tracking and movement. This project will use a trial and error approach, basically seeing what works and what does not. The first step is to initially understand how the hexapod works. To get a general understanding of how the hexapod maneuvers and plan on how to had a neck and head servo which works with the rest of the body. The second step would be configuring the head and neck servos with the leg servos. During this step, limits will be programmed specifically for the each servo. By doing this, the servo is limited to how far it can rotate both clockwise and counterclockwise and this is to prevent hardware damage. The hexapod will have two modes in which it works in. The first mode will be if the sensor bar does not detect an object. If the object it is programmed to look for is not in its view it will automatically scan from left to right 3 times then up and down once. The second mode will be if the sensor bar does detect the object. In this mode the hexapod will track the object from left to

  11. Applications of artificial intelligence X: Machine vision and robotics; Proceedings of the Meeting, Orlando, FL, Apr. 22-24, 1992

    SciTech Connect

    Bowyer, K.W.

    1992-01-01

    Various papers on artificial intelligence in machine vision and robotics are presented. The general topics addressed include: design of a robot head, machine vision inspection techniques, segmentation of fused range and intensity imagery, parallel and VLSI architectures for machine vision, comparison of range image segmentation algorithms, state of the art in postcanny edge detection, simulation and visualization environments for autonomous robots, exploration of recognition by components representation and matching, reactive robotic control strategies, image processing techniques.

  12. A Framework for Information Distribution, Task Execution and Decision Making in Multi-Robot Systems

    NASA Astrophysics Data System (ADS)

    Rambow, Matthias; Rohrmüller, Florian; Kourakos, Omiros; Bršcic, Drazen; Wollherr, Dirk; Hirche, Sandra; Buss, Martin

    Robotic systems operating in the real-world have to cope with unforeseen events by determining appropriate decisions based on noisy or partial knowledge. In this respect high functional robots are equipped with many sensors and actuators and run multiple processing modules in parallel. The resulting complexity is even further increased in case of cooperative multi-robot systems, since mechanisms for joint operation are needed. In this paper a complete and modular framework that handles this complexity in multi-robot systems is presented. It provides efficient exchange of generated data as well as a generic scheme for task execution and robot coordination.

  13. Autonomous robots for hazardous and unstructured environments

    SciTech Connect

    Hamel, W.R.; Babcock, S.M.; Hall, M.G.; Jorgenson, C.C.; Killough, S.M.; Weisbin, C.R.

    1986-01-01

    This paper reports continuing research in the areas of navigation and manipulation in unstructured environments, which is being carried out at the Center for Engineering Systems Advanced Research (CESAR) at the Oak Ridge National Laboratory (ORNL). The HERMIES-II mobile robot, a low-cost prototype of a series that will include many of the major features required for remote operations in hazardous environments, is discussed. Progress toward development of a high-performance research manipulator is presented, and application of an advanced parallel computer to mobile robot problems, which is under way, is discussed.

  14. Petri net controllers for distributed robotic systems

    NASA Technical Reports Server (NTRS)

    Lefebvre, D. R.; Saridis, George N.

    1992-01-01

    Petri nets are a well established modelling technique for analyzing parallel systems. When coupled with an event-driven operating system, Petri nets can provide an effective means for integrating and controlling the functions of distributed robotic applications. Recent work has shown that Petri net graphs can also serve as remarkably intuitive operator interfaces. In this paper, the advantages of using Petri nets as high-level controllers to coordinate robotic functions are outlined, the considerations for designing Petri net controllers are discussed, and simple Petri net structures for implementing an interface for operator supervision are presented. A detailed example is presented which illustrates these concepts for a sensor-based assembly application.

  15. Robotic intelligence kernel

    DOEpatents

    Bruemmer, David J.

    2009-11-17

    A robot platform includes perceptors, locomotors, and a system controller. The system controller executes a robot intelligence kernel (RIK) that includes a multi-level architecture and a dynamic autonomy structure. The multi-level architecture includes a robot behavior level for defining robot behaviors, that incorporate robot attributes and a cognitive level for defining conduct modules that blend an adaptive interaction between predefined decision functions and the robot behaviors. The dynamic autonomy structure is configured for modifying a transaction capacity between an operator intervention and a robot initiative and may include multiple levels with at least a teleoperation mode configured to maximize the operator intervention and minimize the robot initiative and an autonomous mode configured to minimize the operator intervention and maximize the robot initiative. Within the RIK at least the cognitive level includes the dynamic autonomy structure.

  16. Intelligent robots and computer vision

    SciTech Connect

    Casasent, D.P.

    1985-01-01

    This book presents the papers given at a conference which examined artificial intelligence and image processing in relation to robotics. Topics considered at the conference included feature extraction and pattern recognition for computer vision, image processing for intelligent robotics, robot sensors, image understanding and artificial intelligence, optical processing techniques in robotic applications, robot languages and programming, processor architectures for computer vision, mobile robots, multisensor fusion, three-dimensional modeling and recognition, intelligent robots applications, and intelligent robot systems.

  17. Humanoid Robot

    NASA Technical Reports Server (NTRS)

    Linn, Douglas M. (Inventor); Ambrose, Robert O. (Inventor); Diftler, Myron A. (Inventor); Askew, Scott R. (Inventor); Platt, Robert (Inventor); Mehling, Joshua S. (Inventor); Radford, Nicolaus A. (Inventor); Strawser, Phillip A. (Inventor); Bridgwater, Lyndon (Inventor); Wampler, II, Charles W. (Inventor); Abdallah, Muhammad E. (Inventor); Ihrke, Chris A. (Inventor); Reiland, Matthew J. (Inventor); Sanders, Adam M. (Inventor); Reich, David M. (Inventor); Hargrave, Brian (Inventor); Parsons, Adam H. (Inventor); Permenter, Frank N. (Inventor); Davis, Donald R. (Inventor)

    2013-01-01

    A humanoid robot includes a torso, a pair of arms, two hands, a neck, and a head. The torso extends along a primary axis and presents a pair of shoulders. The pair of arms movably extend from a respective one of the pair of shoulders. Each of the arms has a plurality of arm joints. The neck movably extends from the torso along the primary axis. The neck has at least one neck joint. The head movably extends from the neck along the primary axis. The head has at least one head joint. The shoulders are canted toward one another at a shrug angle that is defined between each of the shoulders such that a workspace is defined between the shoulders.

  18. Competencies Identification for Robotics Training.

    ERIC Educational Resources Information Center

    Tang, Le D.

    A study focused on the task of identifying competencies for robotics training. The level of robotics training was limited to that of robot technicians. Study objectives were to obtain a list of occupational competencies; to rank their order of importance; and to compare opinions from robot manufacturers, robot users, and robotics educators…

  19. Special parallel processing workshop

    SciTech Connect

    1994-12-01

    This report contains viewgraphs from the Special Parallel Processing Workshop. These viewgraphs deal with topics such as parallel processing performance, message passing, queue structure, and other basic concept detailing with parallel processing.

  20. Robot strings: Long, thin continuum robots

    NASA Astrophysics Data System (ADS)

    Walker, I. D.

    We describe and discuss the development of long, thin, continuous “ string-like” robots aimed at Space exploration missions. These continuous backbone “ continuum” robots are inspired by numerous biological structures, particularly vines, worms, and the tongues of animals such as the anteater. The key novelty is the high length-to-diameter ratio of the robots. This morphology offers penetration into, and exploration of, significantly narrower and deeper environments than accessible using current robot technology. In this paper, we introduce new design alternatives for long thin continuum robots, based on an analysis and extension of three core existing continuum robot design types. The designs are evaluated based on their mechanical feasibility, structural properties, kinematic simplicity, and degrees of freedom.

  1. Teleoperator/robot technology can help solve biomedical problems

    NASA Technical Reports Server (NTRS)

    Heer, E.; Bejczy, A. K.

    1975-01-01

    Teleoperator and robot technology appears to offer the possibility to apply these techniques to the benefit for the severely handicapped giving them greater self reliance and independence. Major problem areas in the development of prostheses and remotely controlled devices for the handicapped are briefly discussed, and the parallelism with problems in the development of teleoperator/robots identified. A brief description of specific ongoing and projected developments in the area of remotely controlled devices (wheelchairs and manipulators) is provided.

  2. A robotics-based testbed for verifying a method of identifying contact-dynamics model parameters

    NASA Astrophysics Data System (ADS)

    Ma, Ou; Boyden, Samuel

    2006-05-01

    This paper describes a general method of identifying the key parameters of multiple-point contact-dynamics models and a robotics-based testbed for experimentally verifying the new method. Some of the current and future flight systems are required to make physical contact on orbit for on-orbit servicing such as docking, refueling, repairing, etc. Because of the high risks associated with contact operations, the design and operation of such a flight system must be thoroughly analyzed and verified in advance by hardware testing and/or high-fidelity computer simulation. Computer simulations are increasingly playing a major role in system verification because it is extreme difficult to test 6-DOF microgravity contact dynamics on the ground. However, the accuracy of computer simulation depends not only on the mathematical model (i.e., formulation, algorithms, and computer code) but also on the values of model parameters. It is, therefore, desirable to have a systematic method which can identify multiple model parameters directly from routine physical tests of the contact components. The robotics-based experiment testbed introduced in this paper is specially designed to test and verify such a method of identifying contact parameters. The method is capable of identifying the key stiffness, damping, and friction parameters of a contact dynamics model all together from hardware test of contacting components having complicated geometries and multiple contacts. It can also be used to extract contact-dynamics model parameters of a dynamic system from its routine test of complex contact hardware. The paper discusses the major design requirements of this experimental testbed and how they are met by the specific design of the system.

  3. Redundancy resolution of a human arm for controlling a seven DOF wearable robotic system.

    PubMed

    Kim, Hyunchul; Miller, Levi Makaio; Al-Refai, Aimen; Brand, Moshe; Rosen, Jacob

    2011-01-01

    The human arm including the shoulder, elbow, wrist joints and exclusion scapular motion has 7 Degrees of Freedom (DOF) while positioning of the wrist in space and orientating the palm is a task that requires 6 DOF. As such it includes one more DOF than is needed to complete the task. Given the redundant nature of the arm, multiple arm configurations can be used to complete a task, which is expressed mathematically by none unique solution for the inverse kinematics. Despite this mathematical difficulty, the motor control provides a unique solution for the arm redundancy as the arm is moved in space. Resolving this redundancy is becoming critical as the human interacts with a wearable robotic system(exoskeleton) which includes the same redundancy as the human arm. Therefore, the inverse kinematics solution resolving the redundancy of these two coupled systems must be identical in order to guarantee a seamless integration. The redundancy of the arm can be formulated kinematically by defining the swivel angle - the rotation angle of the plane including the upper and lower arm around a virtual axis connecting the shoulder and wrist joints which are fixed in space. Analyzing reaching tasks recorded with a motion capture lab indicates that the swivel angle is selected such that when the elbow joint is flexed, the palm points the head. Based on these experimental results, selecting the point around the center of the head as a stationary target allows to calculate the swivel angle and in that way to resolve the human arm redundancy. Experimental results indicated that by using the proposed redundancy resolution criteria the error between the predicted swivel angle and the actual swivel angle adopted by the motor control system is less then 5 Deg. This criterion or a synthesis of several additional criteria may improve the synergistic relationships between an operator and a wearable robotic system.

  4. Robotic Lander Prototype

    NASA Video Gallery

    NASA engineers successfully integrated and completed system testing on a new robotic lander recently at Teledyne Brown Engineering’s facility in Huntsville in support of the Robotic Lunar Lander ...

  5. Robotic Lander Development Project

    NASA Video Gallery

    The Robotic Lander Development Project at the Marshall Center is testing a prototype lander that will aid in the design and development of a new generation of small, smart, versatile robotic lander...

  6. Robotic Intelligence Kernel: Communications

    SciTech Connect

    Walton, Mike C.

    2009-09-16

    The INL Robotic Intelligence Kernel-Comms is the communication server that transmits information between one or more robots using the RIK and one or more user interfaces. It supports event handling and multiple hardware communication protocols.

  7. Robots and the Economy.

    ERIC Educational Resources Information Center

    Albus, James S.

    1984-01-01

    Spectacular advances in microcomputers are forging new technological frontiers in robotics. For example, many factories will be totally automated. Economic implications of the new technology of robotics for the future are examined. (RM)

  8. Robotic Surveying

    SciTech Connect

    Suzy Cantor-McKinney; Michael Kruzic

    2007-03-01

    ZAPATA ENGINEERING challenged our engineers and scientists, which included robotics expertise from Carnegie Mellon University, to design a solution to meet our client's requirements for rapid digital geophysical and radiological data collection of a munitions test range with no down-range personnel. A prime concern of the project was to minimize exposure of personnel to unexploded ordnance and radiation. The field season was limited by extreme heat, cold and snow. Geographical Information System (GIS) tools were used throughout this project to accurately define the limits of mapped areas, build a common mapping platform from various client products, track production progress, allocate resources and relate subsurface geophysical information to geographical features for use in rapidly reacquiring targets for investigation. We were hopeful that our platform could meet the proposed 35 acres per day, towing both a geophysical package and a radiological monitoring trailer. We held our breath and crossed our fingers as the autonomous Speedrower began to crawl across the playa lakebed. We met our proposed production rate, and we averaged just less than 50 acres per 12-hour day using the autonomous platform with a path tracking error of less than +/- 4 inches. Our project team mapped over 1,800 acres in an 8-week (4 days per week) timeframe. The expertise of our partner, Carnegie Mellon University, was recently demonstrated when their two autonomous vehicle entries finished second and third at the 2005 Defense Advanced Research Projects Agency (DARPA) Grand Challenge. 'The Grand Challenge program was established to help foster the development of autonomous vehicle technology that will some day help save the lives of Americans who are protecting our country on the battlefield', said DARPA Grand Challenge Program Manager, Ron Kurjanowicz. Our autonomous remote-controlled vehicle (ARCV) was a modified New Holland 2550 Speedrower retrofitted to allow the machine

  9. Design and study of the mask exchange system based on Delta parallel mechanism

    NASA Astrophysics Data System (ADS)

    Zhang, Feifan; Wang, Jianping; Zhou, Hongfei; Zhou, Zengxiang; Chu, Jiaru

    2016-07-01

    Mask exchange system is the main part of Multi-Object Broadband Imaging Echellette (MOBIE) on the Thirty Meter Telescope (TMT). The robot is one of the key parts in the mask exchange process. In view of the facts that the scheme the on-board robot is hard to meet the requirements of TMT and the traditional industrial robot is difficult to use in the Mask Exchange System (MEX). The delta parallel mechanism has much advantages such as good dynamic performance, high speed and could integrate a vision recognition system to identify the masks. The design for MEX based on off-board Delta parallel mechanism was proposed in the paper.

  10. RHOBOT: Radiation hardened robotics

    SciTech Connect

    Bennett, P.C.; Posey, L.D.

    1997-10-01

    A survey of robotic applications in radioactive environments has been conducted, and analysis of robotic system components and their response to the varying types and strengths of radiation has been completed. Two specific robotic systems for accident recovery and nuclear fuel movement have been analyzed in detail for radiation hardness. Finally, a general design approach for radiation-hardened robotics systems has been developed and is presented. This report completes this project which was funded under the Laboratory Directed Research and Development program.

  11. Tool Changer For Robot

    NASA Technical Reports Server (NTRS)

    Voellmer, George M.

    1992-01-01

    Mechanism enables robot to change tools on end of arm. Actuated by motion of robot: requires no additional electrical or pneumatic energy to make or break connection between tool and wrist at end of arm. Includes three basic subassemblies: wrist interface plate attached to robot arm at wrist, tool interface plate attached to tool, and holster. Separate tool interface plate and holster provided for each tool robot uses.

  12. Robotics Research for Cybersecurity

    DTIC Science & Technology

    2012-01-24

    Wei-Min Shen 1/24/12 Page 1 of 3 Robotics Research for Cybersecurity Wei-Min Shen Polymorphic Robotics Laboratory USC/ISI, 4676 Admiralty Way...Marina del Rey, CA 90292 Phone: 310-448-8710, Fax: 310-822-0751 Email: shen@isi.edu, Web: http://www.isi.edu/ robots / Executive Summary This...project is to conduct a comprehensive study of robotics research in the context of cybersecurity. Specifically, 1) Create a realistic cybersecurity test

  13. Towards Pervasive Robotics

    DTIC Science & Technology

    2003-01-01

    Towards Pervasive Robotics Artur M. Arsenio Artificial Intelligence Lab - Massachusetts Institute of Technology 545 Technology Square, Room NE43-936...MA 02139 arsenio@ai.mit.edu Abstract Pervasive robotics will require, in a near future, small, light and cheap robots that exhibit complex behaviors...These demands led to the development of the M2-M4 Macaco project - a robotic active vi- sion head. Macaco is a portable system, capable of emulating

  14. Ground Vehicle Robotics

    DTIC Science & Technology

    2013-08-20

    Ground Vehicle Robotics Jim Parker Associate Director, Ground Vehicle Robotics UNCLASSIFIED: Distribution Statement A. Approved for public...DATE 20 AUG 2013 2. REPORT TYPE Briefing Charts 3. DATES COVERED 09-05-2013 to 15-08-2013 4. TITLE AND SUBTITLE Ground Vehicle Robotics 5a...Willing to take Risk on technology -User Evaluated -Contested Environments -Operational Data Applied Robotics for Installation & Base Ops -Low Risk

  15. Telepresence and Intervention Robotics

    DTIC Science & Technology

    2000-11-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADPO10628 TITLE: Telepresence and Intervention Robotics DISTRIBUTION...comprise the compilation report: ADPO10609 thru ADP010633 UNCLASSIFIED 20-1 TELEPRESENCE AND INTERVENTION ROBOTICS Nathalie Cislo Laboratoire de...Robotique de Paris 10-12, Avenue de 1’Europe 78140 VWlizy-Villacoublay, FRANCE cislo@robot.uvsq.fr ABSTRACT In the field of Mobile Robotics applications

  16. Robotics of human movements.

    PubMed

    van der Smagt, Patrick; Grebenstein, Markus; Urbanek, Holger; Fligge, Nadine; Strohmayr, Michael; Stillfried, Georg; Parrish, Jonathon; Gustus, Agneta

    2009-01-01

    The construction of robotic systems that can move the way humans do, with respect to agility, stability and precision, is a necessary prerequisite for the successful integration of robotic systems in human environments. We explain human-centered views on robotics, based on the three basic ingredients (1) actuation; (2) sensing; and (3) control, and formulate detailed examples thereof.

  17. Building a Better Robot

    ERIC Educational Resources Information Center

    Navah, Jan

    2012-01-01

    Kids love to build robots, letting their imaginations run wild with thoughts of what they might look like and what they could be programmed to do. Yet when students use cereal boxes and found objects to make robots, often the projects look too similar and tend to fall apart. This alternative allows students to "build" robots in a different way,…

  18. Robotics development programs overview

    SciTech Connect

    Heckendorn, F.M.

    1990-11-01

    This paper discusses the applications of robotics at the Westinghouse Savannah River Site. The Savannah River Laboratory (SRL) continues to provide support to the Savannah River Site (SRS) in many areas of Robotics and Remote Vision. An overview of the current and near term future developments are presented. The driving forces for Robotics and Vision developments at SRS include the classic reasons for industrial robotics installation (i.e. repetitive and undesirable jobs) and those reasons related to radioactive environments. Protection of personnel from both radiation and radioactive contamination benefit greatly from both Robotics and Telerobotics. Additionally, the quality of information available from remote locations benefits greatly from the ability to visually monitor and remotely sense. The systems discussed include a glovebox waste handling and bagout robot, a shielded cells robot for radioactive waste sample transfer, waste handling gantry robots, a two armed master/slave manipulator as an attachment to a gantry robot, navigation robot research/testing, demonstration of the mobile underwater remote cleaning and inspection device, a camera deployment robot to support remote crane operations and for deployment of radiation sensors directly over a hazardous site, and demonstration of a large mobile robot for high radiation environments. Development of specialized and limited life vision/viewing systems for hazardous environments is also discussed.

  19. Networking a mobile robot

    NASA Astrophysics Data System (ADS)

    McKee, Gerard T.

    1994-10-01

    Conventional mobile robotic systems are `stand alone'. Program development involves loading programs into the mobile, via an umbilical. Autonomous operation, in this context, means `isolation': the user cannot interact with the program as the robot is moving around. Recent research in `swarm robotics' has exploited wireless networks as a means of providing inter- robot communication, but the population is still isolated from the human user. In this paper we report on research we are conducting into the provision of mobile robots as resources on a local area computer network, and thus breaking the isolation barrier. We are making use of new multimedia workstation and wireless networking technology to link the robots to the network in order to provide a new type of resource for the user. We model the robot as a set of resources and propose a client-server architecture as the basis for providing user access to the robots. We describe the types of resources each robot can provide and we outline the potential for cooperative robotics, human-robot cooperation, and teleoperation and autonomous robot behavior within this context.

  20. Robotic Telesurgery Research

    DTIC Science & Technology

    2010-10-01

    concepts have been pursued to provide imaging capabilities for use in robotic surgery . The first concept involves developing a camera system that...Oleynikov, D. Project Title: CAESAR: Computer Automated Enhanced Support and Analysis for Robotic Surgery Source of Support: Intelligent Automation, Inc...successful autonomous robotic surgery . REFERENCES Dolghi, O., Strabala, K., Wortman, T., Goede, M., Farritor, S., & Oleynikov. (2010). Miniature

  1. Mobile robot knowledge base

    NASA Astrophysics Data System (ADS)

    Heath Pastore, Tracy; Barnes, Mitchell; Hallman, Rory

    2005-05-01

    Robot technology is developing at a rapid rate for both commercial and Department of Defense (DOD) applications. As a result, the task of managing both technology and experience information is growing. In the not-to-distant past, tracking development efforts of robot platforms, subsystems and components was not too difficult, expensive, or time consuming. To do the same today is a significant undertaking. The Mobile Robot Knowledge Base (MRKB) provides the robotics community with a web-accessible, centralized resource for sharing information, experience, and technology to more efficiently and effectively meet the needs of the robot system user. The resource includes searchable information on robot components, subsystems, mission payloads, platforms, and DOD robotics programs. In addition, the MRKB website provides a forum for technology and information transfer within the DOD robotics community and an interface for the Robotic Systems Pool (RSP). The RSP manages a collection of small teleoperated and semi-autonomous robotic platforms, available for loan to DOD and other qualified entities. The objective is to put robots in the hands of users and use the test data and fielding experience to improve robot systems.

  2. Total portal robotic pneumonectomy.

    PubMed

    Rodriguez, Jose R

    2013-09-01

    Robotic pulmonary lobectomies have been reported to be technically and oncologically achievable; however, only three robotic pneumonectomy cases have been described. Two of them used a mini thoracotomy. We describe one case of a total portal robotic pneumonectomy without utility incision. We describe the step-by-step process.

  3. Inertially Aided Robotics

    DTIC Science & Technology

    1989-12-31

    0031 dis~bti:,1 is uitsnjt( Deczmllcr 31: 1989 92-05530 2:.-: 3o : T >VE?-A ~ : Inertially Aided Robotics FINAL REPORT for Contract No. DAAHO1 -88-D-0057...1 2 Advantages of Inertially Aided Robotics ...86 iii List of Figures Figure 1 - Robot Manipulator having Joint Sensor Based Control ..................... 2

  4. Robotic Intelligence Kernel: Visualization

    SciTech Connect

    2009-09-16

    The INL Robotic Intelligence Kernel-Visualization is the software that supports the user interface. It uses the RIK-C software to communicate information to and from the robot. The RIK-V illustrates the data in a 3D display and provides an operating picture wherein the user can task the robot.

  5. Robotic Follow Algorithm

    SciTech Connect

    2005-03-30

    The Robotic Follow Algorithm enables allows any robotic vehicle to follow a moving target while reactively choosing a route around nearby obstacles. The robotic follow behavior can be used with different camera systems and can be used with thermal or visual tracking as well as other tracking methods such as radio frequency tags.

  6. Modular robot

    DOEpatents

    Ferrante, T.A.

    1997-11-11

    A modular robot may comprise a main body having a structure defined by a plurality of stackable modules. The stackable modules may comprise a manifold, a valve module, and a control module. The manifold may comprise a top surface and a bottom surface having a plurality of fluid passages contained therein, at least one of the plurality of fluid passages terminating in a valve port located on the bottom surface of the manifold. The valve module is removably connected to the manifold and selectively fluidically connects the plurality of fluid passages contained in the manifold to a supply of pressurized fluid and to a vent. The control module is removably connected to the valve module and actuates the valve module to selectively control a flow of pressurized fluid through different ones of the plurality of fluid passages in the manifold. The manifold, valve module, and control module are mounted together in a sandwich-like manner and comprise a main body. A plurality of leg assemblies are removably connected to the main body and are removably fluidically connected to the fluid passages in the manifold so that each of the leg assemblies can be selectively actuated by the flow of pressurized fluid in different ones of the plurality of fluid passages in the manifold. 12 figs.

  7. Modular robot

    DOEpatents

    Ferrante, Todd A.

    1997-01-01

    A modular robot may comprise a main body having a structure defined by a plurality of stackable modules. The stackable modules may comprise a manifold, a valve module, and a control module. The manifold may comprise a top surface and a bottom surface having a plurality of fluid passages contained therein, at least one of the plurality of fluid passages terminating in a valve port located on the bottom surface of the manifold. The valve module is removably connected to the manifold and selectively fluidically connects the plurality of fluid passages contained in the manifold to a supply of pressurized fluid and to a vent. The control module is removably connected to the valve module and actuates the valve module to selectively control a flow of pressurized fluid through different ones of the plurality of fluid passages in the manifold. The manifold, valve module, and control module are mounted together in a sandwich-like manner and comprise a main body. A plurality of leg assemblies are removably connected to the main body and are removably fluidically connected to the fluid passages in the manifold so that each of the leg assemblies can be selectively actuated by the flow of pressurized fluid in different ones of the plurality of fluid passages in the manifold.

  8. 'Lump Sugar and Salt Shaker'-Like Nano and Pico Space Devices and Robots

    NASA Astrophysics Data System (ADS)

    Vizi, P.; Horváth, A.; Hudoba, Gy.; Bérczi, Sz.; Sík, A.

    2012-10-01

    Nano, Pico Space Devices and Robots (NPSDR) with a new strategy, multiple parallel use of these great number of devices allows the covering of larger surfaces on the planet measuring several focused parameters, e.g., DDS. Environmental friendly design.

  9. Social robots in advanced dementia

    PubMed Central

    Valentí Soler, Meritxell; Agüera-Ortiz, Luis; Olazarán Rodríguez, Javier; Mendoza Rebolledo, Carolina; Pérez Muñoz, Almudena; Rodríguez Pérez, Irene; Osa Ruiz, Emma; Barrios Sánchez, Ana; Herrero Cano, Vanesa; Carrasco Chillón, Laura; Felipe Ruiz, Silvia; López Alvarez, Jorge; León Salas, Beatriz; Cañas Plaza, José M.; Martín Rico, Francisco; Abella Dago, Gonzalo; Martínez Martín, Pablo

    2015-01-01

    Aims: Pilot studies applying a humanoid robot (NAO), a pet robot (PARO) and a real animal (DOG) in therapy sessions of patients with dementia in a nursing home and a day care center. Methods:In the nursing home, patients were assigned by living units, based on dementia severity, to one of the three parallel therapeutic arms to compare: CONTROL, PARO and NAO (Phase 1) and CONTROL, PARO, and DOG (Phase 2). In the day care center, all patients received therapy with NAO (Phase 1) and PARO (Phase 2). Therapy sessions were held 2 days per week during 3 months. Evaluation, at baseline and follow-up, was carried out by blind raters using: the Global Deterioration Scale (GDS), the Severe Mini Mental State Examination (sMMSE), the Mini Mental State Examination (MMSE), the Neuropsychiatric Inventory (NPI), the Apathy Scale for Institutionalized Patients with Dementia Nursing Home version (APADEM-NH), the Apathy Inventory (AI) and the Quality of Life Scale (QUALID). Statistical analysis included descriptive statistics and non-parametric tests performed by a blinded investigator. Results: In the nursing home, 101 patients (Phase 1) and 110 patients (Phase 2) were included. There were no significant differences at baseline. The relevant changes at follow-up were: (Phase 1) patients in the robot groups showed an improvement in apathy; patients in NAO group showed a decline in cognition as measured by the MMSE scores, but not the sMMSE; the robot groups showed no significant changes between them; (Phase 2) QUALID scores increased in the PARO group. In the day care center, 20 patients (Phase 1) and 17 patients (Phase 2) were included. The main findings were: (Phase 1) improvement in the NPI irritability and the NPI total score; (Phase 2) no differences were observed at follow-up. PMID:26388764

  10. Parallel rendering techniques for massively parallel visualization

    SciTech Connect

    Hansen, C.; Krogh, M.; Painter, J.

    1995-07-01

    As the resolution of simulation models increases, scientific visualization algorithms which take advantage of the large memory. and parallelism of Massively Parallel Processors (MPPs) are becoming increasingly important. For large applications rendering on the MPP tends to be preferable to rendering on a graphics workstation due to the MPP`s abundant resources: memory, disk, and numerous processors. The challenge becomes developing algorithms that can exploit these resources while minimizing overhead, typically communication costs. This paper will describe recent efforts in parallel rendering for polygonal primitives as well as parallel volumetric techniques. This paper presents rendering algorithms, developed for massively parallel processors (MPPs), for polygonal, spheres, and volumetric data. The polygon algorithm uses a data parallel approach whereas the sphere and volume render use a MIMD approach. Implementations for these algorithms are presented for the Thinking Ma.chines Corporation CM-5 MPP.

  11. Reverse control for humanoid robot task recognition.

    PubMed

    Hak, Sovannara; Mansard, Nicolas; Stasse, Olivier; Laumond, Jean Paul

    2012-12-01

    Efficient methods to perform motion recognition have been developed using statistical tools. Those methods rely on primitive learning in a suitable space, for example, the latent space of the joint angle and/or adequate task spaces. Learned primitives are often sequential: A motion is segmented according to the time axis. When working with a humanoid robot, a motion can be decomposed into parallel subtasks. For example, in a waiter scenario, the robot has to keep some plates horizontal with one of its arms while placing a plate on the table with its free hand. Recognition can thus not be limited to one task per consecutive segment of time. The method presented in this paper takes advantage of the knowledge of what tasks the robot is able to do and how the motion is generated from this set of known controllers, to perform a reverse engineering of an observed motion. This analysis is intended to recognize parallel tasks that have been used to generate a motion. The method relies on the task-function formalism and the projection operation into the null space of a task to decouple the controllers. The approach is successfully applied on a real robot to disambiguate motion in different scenarios where two motions look similar but have different purposes.

  12. The NIST SPIDER, A Robot Crane

    PubMed Central

    Albus, James; Bostelman, Roger; Dagalakis, Nicholas

    1992-01-01

    The Robot Systems Division of the National Institute of Standards and Technology has been experimenting for several years with new concepts for robot cranes. These concepts utilize the basic idea of the Stewart Platform parallel link manipulator. The unique feature of the NIST approach is to use cables as the parallel links and to use winches as the actuators. So long as the cables are all in tension, the load is kinematically constrained, and the cables resist perturbing forces and moments with equal stiffness to both positive and negative loads. The result is that the suspended load is constrained with a mechanical stiffness determined by the elasticity of the cables, the suspended weight, and the geometry of the mechanism. Based on these concepts, a revolutionary new type of robot crane, the NIST SPIDER (Stewart Platform Instrumented Drive Environmental Robot) has been developed that can control the position, velocity, and force of tools and heavy machinery in all six degrees of freedom (x, y, z, roll, pitch, and yaw). Depending on what is suspended from its work platform, the SPIDER can perform a variety of tasks. Examples are: cutting, excavating and grading, shaping and finishing, lifting and positioning. A 6 m version of the SPIDER has been built and critical performance characteristics analyzed. PMID:28053439

  13. Intelligent robots and computer vision

    SciTech Connect

    Casasent, D.P.

    1986-01-01

    This book presents the papers given at a conference on artificial intelligence and robot vision. Topics considered at the conference included pattern recognition, image processing for intelligent robotics, three-dimensional vision (depth and motion), vision modeling and shape estimation, spatial reasoning, the symbolic processing visual information, robotic sensors and applications, intelligent control architectures for robot systems, robot languages and programming, human-machine interfaces, robotics applications, and architectures of robotics.

  14. Intelligent robots: Do we need them and can they be built

    SciTech Connect

    Mann, R.C.

    1993-01-01

    For avid watchers of science fiction movies, the mention of robotics and artificial intelligence conjures up images of humanlike machines. Often, news reports of scientific advances that enable machines to behave in a flexible manner for a limited set of tests draw parallels to science fiction robots. The effect of this unfortunate kind of publicity is that the scientific disciplines of robotics and artificial intelligence are sometimes regarded as a playground for slightly crazed scientists trying to create artificial humans. In reality, the fields of robotics and artificial intelligence can best be described by answering a few commonly asked questions: What is an intelligent robot, anyway Why would we need things like that Could we build them and make them reliable for certain uses An example of an intelligent machine, or robot is presented and the question of whether intelligent robots are needed is addressed. The impact of ORNL research on uses for intelligent machines is described.

  15. HyBAR: hybrid bone-attached robot for joint arthroplasty

    PubMed Central

    Song, S.; Mor, A.; Jaramaz, B.

    2013-01-01

    Background A number of small bone-attached surgical robots have been introduced to overcome some disadvantages of large stand-alone surgical robots. In orthopaedics, increasing demand on minimally invasive joint replacement surgery has also been encouraging small surgical robot developments. Among various technical aspects of such an approach, optimal miniaturization that maintains structural strength for high speed bone removal was investigated. Methods By observing advantages and disadvantages from serial and parallel robot structures, a new hybrid kinematic configuration was designed for a bone-attached robot to perform precision bone removal for cutting the femoral implant cavity during patellofemoral joint arthroplasty surgery. A series of experimental tests were conducted in order to evaluate the performance of the new robot, especially with respect to accuracy of bone preparation. Results A miniaturized and rigidly-structured robot prototype was developed for minimally invasive bone-attached robotic surgery. A new minimally invasive modular clamping system was also introduced to enhance the robotic procedure. Foam and pig bone experimental results demonstrated a successful implementation of the new robot that eliminated a number of major design problems of a previous prototype. Conclusions For small bone-attached surgical robots that utilize high speed orthopaedic tools, structural rigidity and clamping mechanism are major design issues. The new kinematic configuration using hinged prismatic joints enabled an effective miniaturization with good structural rigidity. Although minor problems still exist at the prototype stage, the new development would be a significant step towards the practical use of such a robot. PMID:19347881

  16. [Robotics in pediatric surgery].

    PubMed

    Camps, J I

    2011-10-01

    Despite the extensive use of robotics in the adult population, the use of robotics in pediatrics has not been well accepted. There is still a lack of awareness from pediatric surgeons on how to use the robotic equipment, its advantages and indications. Benefit is still controversial. Dexterity and better visualization of the surgical field are one of the strong values. Conversely, cost and a lack of small instruments prevent the use of robotics in the smaller patients. The aim of this manuscript is to present the controversies about the use of robotics in pediatric surgery.

  17. Miniaturized autonomous robot

    NASA Astrophysics Data System (ADS)

    Ishihara, Hidenori; Fukuda, Toshio

    1998-01-01

    Many projects developing the miniaturized autonomous robot have been carried out in the whole world. This paper deals with our challenges developing a miniaturized autonomous robot. The miniaturized autonomous robot is defined as the miniaturized closed-loop system with micro processor, microactuators and microsensors. We have developed the micro autonomous robotic system (MARS) consisting of the microprocessor, microsensors, microactuators, communication units and batteries. The MARS controls itself by the downloaded program supplied through the IR communication system. In this paper, we demonstrate several performance of the MARS, and discuss the properties of the miniaturized autonomous robot.

  18. Robotic technology in urology

    PubMed Central

    Murphy, D; Challacombe, B; Khan, M S; Dasgupta, P

    2006-01-01

    Urology has increasingly become a technology‐driven specialty. The advent of robotic surgical systems in the past 10 years has led to urologists becoming the world leaders in the use of such technology. In this paper, we review the history and current status of robotic technology in urology. From the earliest uses of robots for transurethral resection of the prostate, to robotic devices for manipulating laparoscopes and to the current crop of master–slave devices for robotic‐assisted laparoscopic surgery, the evolution of robotics in the urology operating theatre is presented. Future possibilities, including the prospects for nanotechnology in urology, are awaited. PMID:17099094

  19. Robotics Technical Note 102.

    DTIC Science & Technology

    1981-06-01

    IAfl-AIBZ 4U2 AIR FORCE BUSINESS RESEARCH MANAGEMENT CENTER WRIGHT-ETC F/6 13/8 I ROBOTICS TECHNIICAL NOTE 102.(U) JUN Al B M BLABIERSALL UNCLASSIFE...CATALOG uME 1T4.T7- Subtitle S. TYPE OF REPOR & PERIOO COVERED Technical Note 102 Robotics 𔄁 FInal r ---- 6. PERFORMING O1G. REPORT NUMBER C 7. A tNORa B...Identify by block number) Robotics Manufacturing Industrial Robots Robot Technology SRobotics Application BQ~.STRACT (Continue on revere* side It

  20. The Charlotte (TM) intra-vehicular robot

    NASA Technical Reports Server (NTRS)

    Swaim, Patrick L.; Thompson, Clark J.; Campbell, Perry D.

    1994-01-01

    NASA has identified telerobotics and telescience as essential technologies to reduce the crew extra-vehicular activity (EVA) and intra-vehicular activity (IVA) workloads. Under this project, we are developing and flight testing a novel IVA robot to relieve the crew of tedious and routine tasks. Through ground telerobotic control of this robot, we will enable ground researchers to routinely interact with experiments in space. Our approach is to develop an IVA robot system incrementally by employing a series of flight tests with increasing complexity. This approach has the advantages of providing an early IVA capability that can assist the crew, demonstrate capabilities that ground researchers can be confident of in planning for future experiments, and allow incremental refinement of system capabilities and insertion of new technology. In parallel with this approach to flight testing, we seek to establish ground test beds, in which the requirements of payload experimenters can be further investigated. In 1993 we reviewed manifested SpaceHab experiments and defined IVA robot requirements to assist in their operation. We also examined previous IVA robot designs and assessed them against flight requirements. We rejected previous design concepts on the basis of threat to crew safety, operability, and maintainability. Based on this insight, we developed an entirely new concept for IVA robotics, the CHARLOTTE robot system. Ground based testing of a prototype version of the system has already proven its ability to perform most common tasks demanded of the crew, including operation of switches, buttons, knobs, dials, and performing video surveys of experiments and switch panels.

  1. The Charlotte (TM) intra-vehicular robot

    NASA Astrophysics Data System (ADS)

    Swaim, Patrick L.; Thompson, Clark J.; Campbell, Perry D.

    1994-10-01

    NASA has identified telerobotics and telescience as essential technologies to reduce the crew extra-vehicular activity (EVA) and intra-vehicular activity (IVA) workloads. Under this project, we are developing and flight testing a novel IVA robot to relieve the crew of tedious and routine tasks. Through ground telerobotic control of this robot, we will enable ground researchers to routinely interact with experiments in space. Our approach is to develop an IVA robot system incrementally by employing a series of flight tests with increasing complexity. This approach has the advantages of providing an early IVA capability that can assist the crew, demonstrate capabilities that ground researchers can be confident of in planning for future experiments, and allow incremental refinement of system capabilities and insertion of new technology. In parallel with this approach to flight testing, we seek to establish ground test beds, in which the requirements of payload experimenters can be further investigated. In 1993 we reviewed manifested SpaceHab experiments and defined IVA robot requirements to assist in their operation. We also examined previous IVA robot designs and assessed them against flight requirements. We rejected previous design concepts on the basis of threat to crew safety, operability, and maintainability. Based on this insight, we developed an entirely new concept for IVA robotics, the CHARLOTTE robot system. Ground based testing of a prototype version of the system has already proven its ability to perform most common tasks demanded of the crew, including operation of switches, buttons, knobs, dials, and performing video surveys of experiments and switch panels.

  2. Ant-like task allocation and recruitment in cooperative robots.

    PubMed

    Krieger, M J; Billeter, J B; Keller, L

    2000-08-31

    One of the greatest challenges in robotics is to create machines that are able to interact with unpredictable environments in real time. A possible solution may be to use swarms of robots behaving in a self-organized manner, similar to workers in an ant colony. Efficient mechanisms of division of labour, in particular series-parallel operation and transfer of information among group members, are key components of the tremendous ecological success of ants. Here we show that the general principles regulating division of labour in ant colonies indeed allow the design of flexible, robust and effective robotic systems. Groups of robots using ant-inspired algorithms of decentralized control techniques foraged more efficiently and maintained higher levels of group energy than single robots. But the benefits of group living decreased in larger groups, most probably because of interference during foraging. Intriguingly, a similar relationship between group size and efficiency has been documented in social insects. Moreover, when food items were clustered, groups where robots could recruit other robots in an ant-like manner were more efficient than groups without information transfer, suggesting that group dynamics of swarms of robots may follow rules similar to those governing social insects.

  3. Space robotics in Japan

    NASA Astrophysics Data System (ADS)

    Whittaker, William; Lowrie, James W.; McCain, Harry; Bejczy, Antal; Sheridan, Tom; Kanade, Takeo; Allen, Peter

    1994-03-01

    Japan has been one of the most successful countries in the world in the realm of terrestrial robot applications. The panel found that Japan has in place a broad base of robotics research and development, ranging from components to working systems for manufacturing, construction, and human service industries. From this base, Japan looks to the use of robotics in space applications and has funded work in space robotics since the mid-1980's. The Japanese are focusing on a clear image of what they hope to achieve through three objectives for the 1990's: developing long-reach manipulation for tending experiments on Space Station Freedom, capturing satellites using a free-flying manipulator, and surveying part of the moon with a mobile robot. This focus and a sound robotics infrastructure is enabling the young Japanese space program to develop relevant systems for extraterrestrial robotics applications.

  4. Space robotics in Japan

    NASA Technical Reports Server (NTRS)

    Whittaker, William; Lowrie, James W.; Mccain, Harry; Bejczy, Antal; Sheridan, Tom; Kanade, Takeo; Allen, Peter

    1994-01-01

    Japan has been one of the most successful countries in the world in the realm of terrestrial robot applications. The panel found that Japan has in place a broad base of robotics research and development, ranging from components to working systems for manufacturing, construction, and human service industries. From this base, Japan looks to the use of robotics in space applications and has funded work in space robotics since the mid-1980's. The Japanese are focusing on a clear image of what they hope to achieve through three objectives for the 1990's: developing long-reach manipulation for tending experiments on Space Station Freedom, capturing satellites using a free-flying manipulator, and surveying part of the moon with a mobile robot. This focus and a sound robotics infrastructure is enabling the young Japanese space program to develop relevant systems for extraterrestrial robotics applications.

  5. Minimally invasive positioning robot system of femoral neck hollow screw implants based on x-ray error correction

    NASA Astrophysics Data System (ADS)

    Zou, Yunpeng; Xu, Ying; Hu, Lei; Guo, Na; Wang, Lifeng

    2017-01-01

    Aiming the high failure rate, the high radiation quantity and the poor positioning accuracy of femoral neck traditional surgery, this article develops a set of new positioning robot system of femoral neck hollow screw implants based on X-rays error correction, which bases on the study of x-rays perspective principle and the Motion Principle of 6 DOF(degree of freedom) series robot UR(Universal Robots). Compared with Computer Assisted Navigation System, this system owns better positioning accuracy and more simple operation. In addition, without extra Equipment of Visual Tracking, this system can reduce a lot of cost. During the surgery, Doctor can plan the operation path and the pose of mark needle according to the positive and lateral X-rays images of patients. Then they can calculate the pixel ratio according to the ratio of the actual length of mark line and the length on image. After that, they can calculate the amount of exercise of UR Robot according to the relative position between operation path and guide pin and the fixed relationship between guide pin and UR robot. Then, they can control UR to drive the positioning guide pin to the operation path. At this point, check the positioning guide pin and the planning path is coincident, if not, repeat the previous steps, until the positioning guide pin and the planning path coincide which will eventually complete the positioning operation. Moreover, to verify the positioning accuracy, this paper make an errors analysis aiming to thirty cases of the experimental model of bone. The result shows that the motion accuracy of the UR Robot is 0.15mm and the Integral error precision is within 0.8mm. To verify the clinical feasibility of this system, this article analysis on three cases of the clinical experiment. In the whole process of positioning, the X-rays irradiation time is 2-3s, the number of perspective is 3-5 and the whole positioning time is 7-10min. The result shows that this system can complete accurately

  6. Marsupial robots for law enforcement

    NASA Astrophysics Data System (ADS)

    Murphy, Robin R.

    2001-02-01

    Marsupial robots are a type of heterogeneous mobile robot team. A mother robot transports, supports, and recovers one or more daughter robots. This paper will cover the marsupial robot concept, the application of law enforcement, and recent results in collaborative teleoperation for the related task of urban search and rescue.

  7. Parallel path planning in unknown terrains

    NASA Astrophysics Data System (ADS)

    Prassler, Erwin A.; Milios, Evangelos E.

    1991-03-01

    We present a parallel processing approach to path planning in unknown terrains which combines map-based and sensor-based techniques into a real-time capable navigation system. The method is based on massively parallel computations in a grid of simple processing elements denoted as cells. In the course of a relaxation process a potential distribution is created in the grid which exhibits a monotonous slope from a start cell to the cell corresponding to the robot''s goal position. A shortest path is determined by means of a gradient descent criterion which settles on the steepest descent in the potential distribution. Like high-level path planning algorithms our approach is capable of planning shortest paths through an arbitrarily cluttered large-scale terrain on the basis of its current internal map. Sequentially implemented its complexity is in the order of efficient classical path planning algorithms. Unlike these algorithms however the method is also highly responsive to new obstacles encountered in the terrain. By continuing the planning process during the robot''s locomotion information about previously unknown obstacles immediately affects further path planning without a need to interrupt the ongoing planning process. New obstacles cause distortions of the potential distribution which let the robot find proper detours. By ensuring a monotonous slope in the overall distribution we avoid local minimum effects which may trap a robot in the proximity of an obstacle configuration before it has reached its goal. 1 Until the recent past research on path planning in the presence of obstacles can be assigned to two major categories: map-based high-level planning approaches and sensor-based low-level conLrol approaches. In work such as 12 path planning is treated as a high-level planning task. Assuming that an (accnrae) precompiled map of the terrain is available high-level path planners provide paths which guarantee a collision-free locomotion through an arbitrary

  8. Revolutionizing (robot-assisted) laparoscopic gamma tracing using a drop-in gamma probe technology

    PubMed Central

    van Oosterom, Matthias N; Simon, Hervé; Mengus, Laurent; Welling, Mick M; van der Poel, Henk G; van den Berg, Nynke S; van Leeuwen, Fijs WB

    2016-01-01

    In complex (robot-assisted) laparoscopic radioguided surgery procedures, or when low activity lesions are located nearby a high activity background, the limited maneuverability of a laparoscopic gamma probe (LGP; 4 degrees of freedom (DOF)) may hinder lesion identification. We investigated a drop-in gamma probe (DIGP) technology to be inserted via a trocar, after which the laparoscopic surgical tool at hand can pick it up and maneuver it. Phantom experiments showed that distinguishing a low objective from a high background source (1:100 ratio) was only possible with the detector faced >90° from the high background source. Signal-low-objective-to-background ratios of 3.77, 2.01 and 1.84 were found for detector angles of 90°, 135° and 180°, respectively, whereas detector angles of 0° and 45° were unable to distinguish the sources. This underlines the critical role probe positioning plays. We then focused on engineering of the gripping part for optimal DIGP pick-up with a conventional laparoscopic forceps (4 DOF) or a robotic forceps (6 DOF). DIGPs with 0°, 45°, 90°, and 135° -grip orientations were designed, and their maneuverability- and scanning direction were evaluated and compared to a conventional LGP. The maneuverability- and scanning direction of the DIGP was found highest when using the robotic forceps, with the largest effective scanning direction range obtained with the 90° -grip design (0-180° versus 0-111°, 0-140°, and 37-180° for 0°, 45° and 135° -grip designs, respectively). For the laparoscopic forceps, the scan direction directly translated from the angle of the grip design with the advantage that the 135° -gripped DIGP could be faced backwards (not possible with the conventional LGP). In the ex vivo clinical setup, the surgeon rated DIGP pick-up most convenient for the 45°-grip design. Concluding, the DIGP technology was successfully introduced. Optimization of the grip design and grasping angle of the DIGP increased its utility

  9. High Performance Parallel Computational Nanotechnology

    NASA Technical Reports Server (NTRS)

    Saini, Subhash; Craw, James M. (Technical Monitor)

    1995-01-01

    control mini robotic manipulators for positional control; scalable numerical algorithms for reliability, verifications and testability. There appears no fundamental obstacle to simulating molecular compilers and molecular computers on high performance parallel computers, just as the Boeing 777 was simulated on a computer before manufacturing it.

  10. Evolution of robotic arms.

    PubMed

    Moran, Michael E

    2007-01-01

    The foundation of surgical robotics is in the development of the robotic arm. This is a thorough review of the literature on the nature and development of this device with emphasis on surgical applications. We have reviewed the published literature and classified robotic arms by their application: show, industrial application, medical application, etc. There is a definite trend in the manufacture of robotic arms toward more dextrous devices, more degrees-of-freedom, and capabilities beyond the human arm. da Vinci designed the first sophisticated robotic arm in 1495 with four degrees-of-freedom and an analog on-board controller supplying power and programmability. von Kemplen's chess-playing automaton left arm was quite sophisticated. Unimate introduced the first industrial robotic arm in 1961, it has subsequently evolved into the PUMA arm. In 1963 the Rancho arm was designed; Minsky's Tentacle arm appeared in 1968, Scheinman's Stanford arm in 1969, and MIT's Silver arm in 1974. Aird became the first cyborg human with a robotic arm in 1993. In 2000 Miguel Nicolalis redefined possible man-machine capacity in his work on cerebral implantation in owl-monkeys directly interfacing with robotic arms both locally and at a distance. The robotic arm is the end-effector of robotic systems and currently is the hallmark feature of the da Vinci Surgical System making its entrance into surgical application. But, despite the potential advantages of this computer-controlled master-slave system, robotic arms have definite limitations. Ongoing work in robotics has many potential solutions to the drawbacks of current robotic surgical systems.

  11. GRACE and GEORGE: Autonomous Robots for the AAAI Robot Challenge

    DTIC Science & Technology

    2004-01-01

    GRACE and GEORGE: Autonomous Robots for the AAAI Robot Challenge Reid Simmons, Allison Bruce, Dani Goldberg, Adam Goode, Michael Montemerlo, Nicholas...2004 2. REPORT TYPE 3. DATES COVERED - 4. TITLE AND SUBTITLE GRACE and GEORGE: Autonomous Robots for the AAAI Robot Challenge 5a. CONTRACT...Simmons. “A Social Robot that Stands in Line.” Autonomous Robots , 12:3 pp.313-324, May 2002. [Ortony, 1988] A. Ortony, G. L. Clore, and A. Collins

  12. Parallel flow diffusion battery

    DOEpatents

    Yeh, Hsu-Chi; Cheng, Yung-Sung

    1984-08-07

    A parallel flow diffusion battery for determining the mass distribution of an aerosol has a plurality of diffusion cells mounted in parallel to an aerosol stream, each diffusion cell including a stack of mesh wire screens of different density.

  13. Parallel flow diffusion battery

    DOEpatents

    Yeh, H.C.; Cheng, Y.S.

    1984-01-01

    A parallel flow diffusion battery for determining the mass distribution of an aerosol has a plurality of diffusion cells mounted in parallel to an aerosol stream, each diffusion cell including a stack of mesh wire screens of different density.

  14. Robotic Assistance for Ultrasound-Guided Prostate Brachytherapy

    PubMed Central

    Fichtinger, Gabor; Fiene, Jonathan P.; Kennedy, Christopher W.; Kronreif, Gernot; Iordachita, Iulian; Song, Danny Y.; Burdette, Everette C.; Kazanzides, Peter

    2016-01-01

    We present a robotically assisted prostate brachytherapy system and test results in training phantoms and Phase-I clinical trials. The system consists of a transrectal ultrasound (TRUS) and a spatially co-registered robot, fully integrated with an FDA-approved commercial treatment planning system. The salient feature of the system is a small parallel robot affixed to the mounting posts of the template. The robot replaces the template interchangeably, using the same coordinate system. Established clinical hardware, workflow and calibration remain intact. In all phantom experiments, we recorded the first insertion attempt without adjustment. All clinically relevant locations in the prostate were reached. Non-parallel needle trajectories were achieved. The pre-insertion transverse and rotational errors (measured with a Polaris optical tracker relative to the template’s coordinate frame) were 0.25mm (STD=0.17mm) and 0.75° (STD=0.37°). In phantoms, needle tip placement errors measured in TRUS were 1.04mm (STD=0.50mm). A Phase-I clinical feasibility and safety trial has been successfully completed with the system. We encountered needle tip positioning errors of a magnitude greater than 4mm in only 2 out of 179 robotically guided needles, in contrast to manual template guidance where errors of this magnitude are much more common. Further clinical trials are necessary to determine whether the apparent benefits of the robotic assistant will lead to improvements in clinical efficacy and outcomes. PMID:18650122

  15. Sensor-guided parking system for a carlike robot

    NASA Astrophysics Data System (ADS)

    Jiang, Kaichum; Seneviratne, L. D.

    1998-07-01

    This paper presents an automated parking strategy for a car- like mobile robot. The study considers general parking manoeuvre cases for a rectangular robot, including parallel parking. The robot is constructed simulating a conventional car, which is subject to non-holonomic constraints and thus only has two degrees of freedom. The parking space is considered as rectangular, and detected by ultrasonic sensors mounted on the robot. A motion planning algorithm develops a collision-free path for parking, taking into account the non- holonomic constraints acting on the car-like robot. A research into general car maneuvers has been conducted and useful results have been achieved. The motion planning algorithm uses these results, combined with configuration space method, to produce a collision-free path for parallel parking, depending on the parking space detected. A control program in the form of a graphical user interface has been developed for users to operate the system with ease. The strategy is implemented on a modified B12 mobile robot. The strategy presented has the potential for application in automobiles.

  16. A robot trace maker: modeling the fossil evidence of early invertebrate behavior.

    PubMed

    Prescott, T J; Ibbotson, C

    1997-01-01

    The study of trace fossils, the fossilized remains of animal behavior, reveals interesting parallels with recent research in behavior-based robotics. This article reports robot simulations of the meandering foraging trails left by early invertebrates that demonstrate that such trails can be generated by mechanisms similar to those used for robot wall-following. We conclude with the suggestion that the capacity for intelligent behavior shown by many behavior-based robots is similar to that of animals of the late Precambrian and early Cambrian periods approximately 530 to 565 million years ago.

  17. Parallel processing ITS

    SciTech Connect

    Fan, W.C.; Halbleib, J.A. Sr.

    1996-09-01

    This report provides a users` guide for parallel processing ITS on a UNIX workstation network, a shared-memory multiprocessor or a massively-parallel processor. The parallelized version of ITS is based on a master/slave model with message passing. Parallel issues such as random number generation, load balancing, and communication software are briefly discussed. Timing results for example problems are presented for demonstration purposes.

  18. Humanlike Robots - The Upcoming Revolution in Robotics

    NASA Technical Reports Server (NTRS)

    Bar-Cohen, Yoseph

    2009-01-01

    Humans have always sought to imitate the human appearance, functions and intelligence. Human-like robots, which for many years have been a science fiction, are increasingly becoming an engineering reality resulting from the many advances in biologically inspired technologies. These biomimetic technologies include artificial intelligence, artificial vision and hearing as well as artificial muscles, also known as electroactive polymers (EAP). Robots, such as the vacuum cleaner Rumba and the robotic lawnmower, that don't have human shape, are already finding growing use in homes worldwide. As opposed to other human-made machines and devices, this technology raises also various questions and concerns and they need to be addressed as the technology advances. These include the need to prevent accidents, deliberate harm, or their use in crime. In this paper the state-of-the-art of the ultimate goal of biomimetics, the development of humanlike robots, the potentials and the challenges are reviewed.

  19. Humanlike robots: the upcoming revolution in robotics

    NASA Astrophysics Data System (ADS)

    Bar-Cohen, Yoseph

    2009-08-01

    Humans have always sought to imitate the human appearance, functions and intelligence. Human-like robots, which for many years have been a science fiction, are increasingly becoming an engineering reality resulting from the many advances in biologically inspired technologies. These biomimetic technologies include artificial intelligence, artificial vision and hearing as well as artificial muscles, also known as electroactive polymers (EAP). Robots, such as the vacuum cleaner Rumba and the robotic lawnmower, that don't have human shape, are already finding growing use in homes worldwide. As opposed to other human-made machines and devices, this technology raises also various questions and concerns and they need to be addressed as the technology advances. These include the need to prevent accidents, deliberate harm, or their use in crime. In this paper the state-of-the-art of the ultimate goal of biomimetics, the development of humanlike robots, the potentials and the challenges are reviewed.

  20. Research in parallel computing

    NASA Technical Reports Server (NTRS)

    Ortega, James M.; Henderson, Charles

    1994-01-01

    This report summarizes work on parallel computations for NASA Grant NAG-1-1529 for the period 1 Jan. - 30 June 1994. Short summaries on highly parallel preconditioners, target-specific parallel reductions, and simulation of delta-cache protocols are provided.

  1. Parallel simulation today

    NASA Technical Reports Server (NTRS)

    Nicol, David; Fujimoto, Richard

    1992-01-01

    This paper surveys topics that presently define the state of the art in parallel simulation. Included in the tutorial are discussions on new protocols, mathematical performance analysis, time parallelism, hardware support for parallel simulation, load balancing algorithms, and dynamic memory management for optimistic synchronization.

  2. INL Multi-Robot Control Interface

    SciTech Connect

    2005-03-30

    The INL Multi-Robot Control Interface controls many robots through a single user interface. The interface includes a robot display window for each robot showing the robot’s condition. More than one window can be used depending on the number of robots. The user interface also includes a robot control window configured to receive commands for sending to the respective robot and a multi-robot common window showing information received from each robot.

  3. Applying robotics to HAZMAT

    NASA Technical Reports Server (NTRS)

    Welch, Richard V.; Edmonds, Gary O.

    1994-01-01

    The use of robotics in situations involving hazardous materials can significantly reduce the risk of human injuries. The Emergency Response Robotics Project, which began in October 1990 at the Jet Propulsion Laboratory, is developing a teleoperated mobile robot allowing HAZMAT (hazardous materials) teams to remotely respond to incidents involving hazardous materials. The current robot, called HAZBOT III, can assist in locating characterizing, identifying, and mitigating hazardous material incidents without risking entry team personnel. The active involvement of the JPL Fire Department HAZMAT team has been vital in developing a robotic system which enables them to perform remote reconnaissance of a HAZMAT incident site. This paper provides a brief review of the history of the project, discusses the current system in detail, and presents other areas in which robotics can be applied removing people from hazardous environments/operations.

  4. Robots in modern industry

    NASA Technical Reports Server (NTRS)

    Heer, E.

    1981-01-01

    A survey is presented of robotic device types and capabilities, and an assessment is made of the relative benefits they confer in present and planned numbers on such industrial countries as Japan, the U.S., and West Germany. Attention is also given to possible social impacts of large-scale implementation, and the need for close consultation between management and labor is stressed. It is reported that, while the hourly cost of robot labor remained at between $4.00 and $4.60 over the period 1960-present, human hourly labor costs (including fringe benefits) have risen from less than $4.00 to nearly $17.00. Among the types of devices described are: (1) remotely controlled manipulator vehicles; (2) undersea robotic craft; (3) servo-controlled robots; and (4) articulated robots. Also covered are robot programming languages derived from such standard languages as ALGOL, FORTRAN, and BASIC.

  5. ROBOTIC SURGERY: BIOETHICAL ASPECTS

    PubMed Central

    SIQUEIRA-BATISTA, Rodrigo; SOUZA, Camila Ribeiro; MAIA, Polyana Mendes; SIQUEIRA, Sávio Lana

    2016-01-01

    ABSTRACT Introduction: The use of robots in surgery has been increasingly common today, allowing the emergence of numerous bioethical issues in this area. Objective: To present review of the ethical aspects of robot use in surgery. Method: Search in Pubmed, SciELO and Lilacs crossing the headings "bioethics", "surgery", "ethics", "laparoscopy" and "robotic". Results: Of the citations obtained, were selected 17 articles, which were used for the preparation of the article. It contains brief presentation on robotics, its inclusion in health and bioethical aspects, and the use of robots in surgery. Conclusion: Robotic surgery is a reality today in many hospitals, which makes essential bioethical reflection on the relationship between health professionals, automata and patients. PMID:28076489

  6. Robotic surgical simulation.

    PubMed

    Liss, Michael A; McDougall, Elspeth M

    2013-01-01

    Robotic surgery has undergone exponential growth and has ever developing utilization. The explosion of new technologies and regulation have led to challenges in training surgeons who desire this skill set. We review the current state of robotic simulation and incorporation of simulation into surgical training curricula. In addition to the literature review, results of a questionnaire survey study of 21 expert and novice surgeons attending a Urologic Robotic Oncology conference using 3 different robotic skill simulation devices are discussed. An increasing number of robotic surgery simulators have had some degree of validation study of their use in surgical education curricula and proficiency testing. Although simulators are advantageous, confirmation of construct and predictive validity of robotic simulators and their reliability as a training tool will be necessary before they are integrated into the surgical credentialing process.

  7. Survival of falling robots

    NASA Astrophysics Data System (ADS)

    Cameron, Jonathan M.; Arkin, Ronald C.

    1992-02-01

    As mobile robots are used in more uncertain and dangerous environments, it will become important to design them so that they can survive falls. In this paper, we examine a number of mechanisms and strategies that animals use to withstand these potentially catastrophic events and extend them to the design of robots. A brief survey of several aspects of how common cats survive falls provides an understanding of the issues involved in preventing traumatic injury during a falling event. After outlining situations in which robots might fall, a number of factors affecting their survival are described. From this background, several robot design guidelines are derived. These include recommendations for the physical structure of the robot as well as requirements for the robot control architecture. A control architecture is proposed based on reactive control techniques and action-oriented perception that is geared to support this form of survival behavior.

  8. Survival of falling robots

    NASA Technical Reports Server (NTRS)

    Cameron, Jonathan M.; Arkin, Ronald C.

    1992-01-01

    As mobile robots are used in more uncertain and dangerous environments, it will become important to design them so that they can survive falls. In this paper, we examine a number of mechanisms and strategies that animals use to withstand these potentially catastrophic events and extend them to the design of robots. A brief survey of several aspects of how common cats survive falls provides an understanding of the issues involved in preventing traumatic injury during a falling event. After outlining situations in which robots might fall, a number of factors affecting their survival are described. From this background, several robot design guidelines are derived. These include recommendations for the physical structure of the robot as well as requirements for the robot control architecture. A control architecture is proposed based on reactive control techniques and action-oriented perception that is geared to support this form of survival behavior.

  9. Robotic Ankle for Omnidirectional Rock Anchors

    NASA Technical Reports Server (NTRS)

    Parness, Aaron; Frost, Matthew; Thatte, Nitish

    2013-01-01

    rotary DC motor that can drag the microspine arrays across the surface to engage them with asperities, as well as a linear actuator to disengage the hooks from the surface. Additionally, the ankle allows the gripper to rotate freely about all three axes so that when the robot takes a step, the gripper may optimally orient itself with respect to the wall or ground. Finally, the ankle contains some minimal elasticity, so that between steps, the gripper returns to a default position that is roughly parallel to the wall.

  10. Parallel processing architecture for computing inverse differential kinematic equations of the PUMA arm

    NASA Technical Reports Server (NTRS)

    Hsia, T. C.; Lu, G. Z.; Han, W. H.

    1987-01-01

    In advanced robot control problems, on-line computation of inverse Jacobian solution is frequently required. Parallel processing architecture is an effective way to reduce computation time. A parallel processing architecture is developed for the inverse Jacobian (inverse differential kinematic equation) of the PUMA arm. The proposed pipeline/parallel algorithm can be inplemented on an IC chip using systolic linear arrays. This implementation requires 27 processing cells and 25 time units. Computation time is thus significantly reduced.

  11. Robotics and expert systems

    SciTech Connect

    Not Available

    1986-01-01

    This volume contains papers presented at ROBEXS' 86, the Second Annual Workshop on Robotics and Expert Systems. Many diverse perspectives on automation problems, and on the merging of robotics and expert systems technology with conventional systems, are contained in this book. The contents include: Integrated Expert Systems Applications; Expert Systems Theory and Applications, Robotics, Intelligent Control, CAD/CAE/CAM, AI Tools, Human Factors, and intelligent Interfaces.

  12. Robotic liver surgery

    PubMed Central

    Leung, Universe

    2014-01-01

    Robotic surgery is an evolving technology that has been successfully applied to a number of surgical specialties, but its use in liver surgery has so far been limited. In this review article we discuss the challenges of minimally invasive liver surgery, the pros and cons of robotics, the evolution of medical robots, and the potentials in applying this technology to liver surgery. The current data in the literature are also presented. PMID:25392840

  13. NASA Robot Brain Surgeon

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Mechanical Engineer Michael Guerrero works on the Robot Brain Surgeon testbed in the NeuroEngineering Group at the Ames Research Center, Moffett Field, California. Principal investigator Dr. Robert W. Mah states that potentially the simple robot will be able to feel brain structures better than any human surgeon, making slow, very precise movements during an operation. The brain surgery robot that may give surgeons finer control of surgical instruments during delicate brain operations is still under development.

  14. TARDEC Ground Vehicle Robotics

    DTIC Science & Technology

    2013-05-30

    TARDEC Ground Vehicle Robotics Mr. Jim Parker, Associate Director Dr. Greg Hudas, Chief Engineer UNCLASSIFIED: Distribution Statement A (OPSEC...TARDEC Ground Vehicle Robotics 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Jim Parker; Greg Hudas 5d. PROJECT...Provide Transition-Ready, Cost-Effective, and Innovative Robotics and Control System Solutions for Manned, Optionally-Manned, and Unmanned Ground Vehicles

  15. A Modular Robotic Architecture

    DTIC Science & Technology

    1990-11-01

    DATES COVERED AD-A232 007 Januar 1991 professional paper5 FUNOING NUMBERS A MODULAR ROBOTIC ARCHITECTURE PR: ZE92 WU: DN300029 PE: 0602936N - S. AUTHOR...mobile robots will help alleviate these problems, and, if made widely available, will promote standardization and compatibility among systems throughout...the industry. The Modular Robotic Architecture (MRA) is a generic control system that meets the above needs by providing developers with a standard set

  16. Ground Vehicle Robotics Presentation

    DTIC Science & Technology

    2012-08-14

    Mr. Jim Parker Associate Director Ground Vehicle Robotics Distribution Statement A. Approved for public release Report Documentation Page...Briefing 3. DATES COVERED 01-07-2012 to 01-08-2012 4. TITLE AND SUBTITLE Ground Vehicle Robotics Presentation 5a. CONTRACT NUMBER 5b. GRANT...ABSTRACT Provide Transition-Ready, Cost-Effective, and Innovative Robotics and Control System Solutions for Manned, Optionally-Manned, and Unmanned

  17. Robotic Security Systems

    DTIC Science & Technology

    2003-12-01

    robotic security platforms that automatically respond in an adaptive fashion to potential disturbances reported by a broad-area field of fixed unattended...sensors represents a powerful new defensive tool for mitigating the terrorist threat. Background The primary purpose of any robotic system is to...mobile robots , the predominant challenge is one of perception, in that the very nature of mobility introduces a never-ending sequence of dynamically

  18. Army Medical Robotics Research

    DTIC Science & Technology

    2007-01-01

    Army Medical Robotics Research Gary Gilbert, Ph.D., U.S. Army TATRC, Ph: (301) 619-4043, Fax: (301) 619-2518 gilbert@tatrc.org, www.tatrc.org...politically sensitive low intensity combat in urban terrain. Research progress has been made in the areas of robotics ; artificial intelligence...institutions have demonstrated intelligent robots that execute functions ranging from performing mechanical repairs to playing soccer. The military has

  19. Robotics Strategy White Paper

    DTIC Science & Technology

    2009-03-19

    VIRGINIA 23651-1087 REPlY TO A1Tl!NTlON OF ATFC-DS 19 MEMORANDUM FOR SEE DISTRIBUTION SUBJECT: Robotics Strategy White Paper 1. The enclosed... Robotics Strategy White Paper is the result of a collaborative effort between the U.S. Anny Training and Doctrine Command (TRADOC) and the Tank-Automotive...Research, Development and Engineering Center (TARDEC). This paper builds on a confederated Anny robotics "strategy" that is described by senior leader

  20. AMAS Robotics Seminar Brief

    DTIC Science & Technology

    2011-07-19

    Unclassified Unclassified 19 July 2011 AMAS ROBOTICS SEMINAR BRIEF Aaron Hart, Product Integrator, RS JPO DISTRIBUTION STATEMENT A. Approved for...19-07-2011 to 19-07-2011 4. TITLE AND SUBTITLE robotics seminar brief 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES AMAS ROBOTICS SEMINAR BRIEF 14

  1. Artificial Intelligence and Robotics.

    DTIC Science & Technology

    1984-02-01

    D-Ai42 488 ARTIFICIAL INEELLIGENCE AND ROBOTICS (U) MASSACHUSETTS i/1 INST OF TECH CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB M BRADY FEB 84 AI-M-756...Subtile) S. TYPE OF REPORT A PERIOD COVERED Artificial Intelligence and Robotics 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(*) S. CONTRACT OR GRANT NUMBER...Identify by block niiniber) -. Since Robotics is the field concerned with the connection of perception to action, Artificial Intelligence must have a

  2. Compliant Robotic Structures

    DTIC Science & Technology

    1985-08-01

    robotic structure is one or more continuously flexible arms -hat can be controlled to manipulate objects. A typical arm is comprised of ... of ideas for the design of versatile, strong robotic manipulators. In this paper a mathematical model of an elephant trunk lifting a weight is...Results may be used for the design of robotic actuators driven by internal pressure. I,g or 67 I* .,.. INTRODUCTION Improvement in the

  3. Industrial robots: Handbook

    NASA Astrophysics Data System (ADS)

    Kozyrev, Iu. G.

    Topics covered include terms, definitions, and classification; operator-directed manipulators; autooperators as used in automated pressure casting; construction and application of industrial robots; and the operating bases of automated systems. Attention is given to adaptive and interactive robots; gripping mechanisms; applications to foundary production, press-forging plants, heat treatment, welding, and assembly operations. A review of design recommendations includes a determination of fundamental structural and technological indicators for industrial robots and a consideration of drive mechanisms.

  4. Asteroid Redirect Mission: Robotic Segment

    NASA Video Gallery

    This concept animation illustrates the robotic segment of NASA's Asteroid Redirect Mission. The Asteroid Redirect Vehicle, powered by solar electric propulsion, travels to a large asteroid to robot...

  5. Parallel algorithm development

    SciTech Connect

    Adams, T.F.

    1996-06-01

    Rapid changes in parallel computing technology are causing significant changes in the strategies being used for parallel algorithm development. One approach is simply to write computer code in a standard language like FORTRAN 77 or with the expectation that the compiler will produce executable code that will run in parallel. The alternatives are: (1) to build explicit message passing directly into the source code; or (2) to write source code without explicit reference to message passing or parallelism, but use a general communications library to provide efficient parallel execution. Application of these strategies is illustrated with examples of codes currently under development.

  6. Children's Perception and Interpretation of Robots and Robot Behaviour

    NASA Astrophysics Data System (ADS)

    Bhamjee, Sajida; Griffiths, Frances; Palmer, Julie

    Technology is advancing rapidly; especially in the field of robotics. The purpose of this study was to examine children's perception and interpretation of robots and robot behaviour. The study was divided into two phases: phase one involved 144 children (aged 7-8) from two primary schools drawing a picture of a robot and then writing a story about the robot that they had drawn. In phase two, in small groups, 90 children observed four e-puck robots interacting within an arena. The children were asked three questions during the observation: 'What do you think the robots are doing?', 'Why are they doing these things?' and 'What is going on inside the robot?' The results indicated that children can hold multiple understandings of robots simultaneously. Children tend to attribute animate characteristics to robots. Although this may be explained by their stage of development, it may also influence how their generation integrates robots into society.

  7. Hopping Robot with Wheels

    NASA Technical Reports Server (NTRS)

    Barlow, Edward; Marzwell, Nevellie; Fuller, Sawyer; Fionni, Paolo; Tretton, Andy; Burdick, Joel; Schell, Steve

    2003-01-01

    A small prototype mobile robot is capable of (1) hopping to move rapidly or avoid obstacles and then (2) moving relatively slowly and precisely on the ground by use of wheels in the manner of previously reported exploratory robots of the "rover" type. This robot is a descendant of a more primitive hopping robot described in "Minimally Actuated Hopping Robot" (NPO- 20911), NASA Tech Briefs, Vol. 26, No. 11 (November 2002), page 50. There are many potential applications for robots with hopping and wheeled-locomotion (roving) capabilities in diverse fields of endeavor, including agriculture, search-and-rescue operations, general military operations, removal or safe detonation of land mines, inspection, law enforcement, and scientific exploration on Earth and remote planets. The combination of hopping and roving enables this robot to move rapidly over very rugged terrain, to overcome obstacles several times its height, and then to position itself precisely next to a desired target. Before a long hop, the robot aims itself in the desired hopping azimuth and at a desired takeoff angle above horizontal. The robot approaches the target through a series of hops and short driving operations utilizing the steering wheels for precise positioning.

  8. Human-Robot Interaction

    NASA Technical Reports Server (NTRS)

    Sandor, Aniko; Cross, E. Vincent, II; Chang, Mai Lee

    2015-01-01

    Human-robot interaction (HRI) is a discipline investigating the factors affecting the interactions between humans and robots. It is important to evaluate how the design of interfaces affect the human's ability to perform tasks effectively and efficiently when working with a robot. By understanding the effects of interface design on human performance, workload, and situation awareness, interfaces can be developed to appropriately support the human in performing tasks with minimal errors and with appropriate interaction time and effort. Thus, the results of research on human-robot interfaces have direct implications for the design of robotic systems. For efficient and effective remote navigation of a rover, a human operator needs to be aware of the robot's environment. However, during teleoperation, operators may get information about the environment only through a robot's front-mounted camera causing a keyhole effect. The keyhole effect reduces situation awareness which may manifest in navigation issues such as higher number of collisions, missing critical aspects of the environment, or reduced speed. One way to compensate for the keyhole effect and the ambiguities operators experience when they teleoperate a robot is adding multiple cameras and including the robot chassis in the camera view. Augmented reality, such as overlays, can also enhance the way a person sees objects in the environment or in camera views by making them more visible. Scenes can be augmented with integrated telemetry, procedures, or map information. Furthermore, the addition of an exocentric (i.e., third-person) field of view from a camera placed in the robot's environment may provide operators with the additional information needed to gain spatial awareness of the robot. Two research studies investigated possible mitigation approaches to address the keyhole effect: 1) combining the inclusion of the robot chassis in the camera view with augmented reality overlays, and 2) modifying the camera

  9. [Robots and intellectual property].

    PubMed

    Larrieu, Jacques

    2013-12-01

    This topic is part of the global issue concerning the necessity to adapt intellectual property law to constant changes in technology. The relationship between robots and IP is dual. On one hand, the robots may be regarded as objects of intellectual property. A robot, like any new machine, could qualify for a protection by a patent. A copyright may protect its appearance if it is original. Its memory, like a database, could be covered by a sui generis right. On the other hand, the question of the protection of the outputs of the robot must be raised. The robots, as the physical embodiment of artificial intelligence, are becoming more and more autonomous. Robot-generated works include less and less human inputs. Are these objects created or invented by a robot copyrightable or patentable? To whom the ownership of these IP rights will be allocated? To the person who manufactured the machine ? To the user of the robot? To the robot itself? All these questions are worth discussing.

  10. Robotics for welding research

    SciTech Connect

    Braun, G.; Jones, J.

    1984-09-01

    The welding metallurgy research and education program at Colorado School of Mines (CSM) is helping industries make the transition toward automation by training students in robotics. Industry's interest is primarily in pick and place operations, although robotics can increase efficiency in areas other than production. Training students to develop fully automated robotic welding systems will usher in new curriculum requirements in the area of computers and microprocessors. The Puma 560 robot is CSM's newest acquisition for welding research 5 references, 2 figures, 1 table.

  11. [Robotic surgery in gynecology].

    PubMed

    Csorba, Roland

    2012-06-24

    Minimally invasive surgery has revolutionized gynecological interventions over the past 30 years. The introduction of the da Vinci robotic surgery in 2005 has resulted in large changes in surgical management. The robotic platform allows less experienced laparoscopic surgeons to perform more complex procedures. It can be utilized mainly in general gynecology and reproductive gynecology. The robot is being increasingly used for procedures such as hysterectomy, myomectomy, adnexal surgery, and tubal anastomosis. In urogynecology, the robot is being utilized for sacrocolopexy as well. In the field of gynecologic oncology, the robot is being increasingly used for hysterectomy and lymphadenectomy in oncologic diseases. Despite the rapid and widespread adaption of robotic surgery in gynecology, there are no randomized trials comparing its efficacy and safety to other traditional surgical approaches. This article presents the development, technical aspects and indications of robotic surgery in gynecology, based on the previously published reviews. Robotic surgery can be highly advantageous with the right amount of training, along with appropriate patient selection. Patients will have less blood loss, less post-operative pain, faster recovery, and fewer complications compared to open surgery and laparoscopy. However, until larger randomized control trials are completed which report long-term outcomes, robotic surgery cannot be stated to have priority over other surgical methods.

  12. Advanced robot locomotion.

    SciTech Connect

    Neely, Jason C.; Sturgis, Beverly Rainwater; Byrne, Raymond Harry; Feddema, John Todd; Spletzer, Barry Louis; Rose, Scott E.; Novick, David Keith; Wilson, David Gerald; Buerger, Stephen P.

    2007-01-01

    This report contains the results of a research effort on advanced robot locomotion. The majority of this work focuses on walking robots. Walking robot applications include delivery of special payloads to unique locations that require human locomotion to exo-skeleton human assistance applications. A walking robot could step over obstacles and move through narrow openings that a wheeled or tracked vehicle could not overcome. It could pick up and manipulate objects in ways that a standard robot gripper could not. Most importantly, a walking robot would be able to rapidly perform these tasks through an intuitive user interface that mimics natural human motion. The largest obstacle arises in emulating stability and balance control naturally present in humans but needed for bipedal locomotion in a robot. A tracked robot is bulky and limited, but a wide wheel base assures passive stability. Human bipedal motion is so common that it is taken for granted, but bipedal motion requires active balance and stability control for which the analysis is non-trivial. This report contains an extensive literature study on the state-of-the-art of legged robotics, and it additionally provides the analysis, simulation, and hardware verification of two variants of a proto-type leg design.

  13. Robotic Thumb Assembly

    NASA Technical Reports Server (NTRS)

    Ihrke, Chris A. (Inventor); Bridgwater, Lyndon (Inventor); Platt, Robert (Inventor); Wampler, II, Charles W. (Inventor); Goza, S. Michael (Inventor)

    2013-01-01

    An improved robotic thumb for a robotic hand assembly is provided. According to one aspect of the disclosure, improved tendon routing in the robotic thumb provides control of four degrees of freedom with only five tendons. According to another aspect of the disclosure, one of the five degrees of freedom of a human thumb is replaced in the robotic thumb with a permanent twist in the shape of a phalange. According to yet another aspect of the disclosure, a position sensor includes a magnet having two portions shaped as circle segments with different center points. The magnet provides a linearized output from a Hall effect sensor.

  14. Experiments in autonomous robotics

    SciTech Connect

    Hamel, W.R.

    1987-01-01

    The Center for Engineering Systems Advanced Research (CESAR) is performing basic research in autonomous robotics for energy-related applications in hazardous environments. The CESAR research agenda includes a strong experimental component to assure practical evaluation of new concepts and theories. An evolutionary sequence of mobile research robots has been planned to support research in robot navigation, world sensing, and object manipulation. A number of experiments have been performed in studying robot navigation and path planning with planar sonar sensing. Future experiments will address more complex tasks involving three-dimensional sensing, dexterous manipulation, and human-scale operations.

  15. Hazardous Environment Robotics

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Jet Propulsion Laboratory (JPL) developed video overlay calibration and demonstration techniques for ground-based telerobotics. Through a technology sharing agreement with JPL, Deneb Robotics added this as an option to its robotics software, TELEGRIP. The software is used for remotely operating robots in nuclear and hazardous environments in industries including automotive and medical. The option allows the operator to utilize video to calibrate 3-D computer models with the actual environment, and thus plan and optimize robot trajectories before the program is automatically generated.

  16. Parallel Atomistic Simulations

    SciTech Connect

    HEFFELFINGER,GRANT S.

    2000-01-18

    Algorithms developed to enable the use of atomistic molecular simulation methods with parallel computers are reviewed. Methods appropriate for bonded as well as non-bonded (and charged) interactions are included. While strategies for obtaining parallel molecular simulations have been developed for the full variety of atomistic simulation methods, molecular dynamics and Monte Carlo have received the most attention. Three main types of parallel molecular dynamics simulations have been developed, the replicated data decomposition, the spatial decomposition, and the force decomposition. For Monte Carlo simulations, parallel algorithms have been developed which can be divided into two categories, those which require a modified Markov chain and those which do not. Parallel algorithms developed for other simulation methods such as Gibbs ensemble Monte Carlo, grand canonical molecular dynamics, and Monte Carlo methods for protein structure determination are also reviewed and issues such as how to measure parallel efficiency, especially in the case of parallel Monte Carlo algorithms with modified Markov chains are discussed.

  17. Cooperative crossing of traffic intersections in a distributed robot system

    NASA Astrophysics Data System (ADS)

    Rausch, Alexander; Oswald, Norbert; Levi, Paul

    1995-09-01

    In traffic scenarios a distributed robot system has to cope with problems like resource sharing, distributed planning, distributed job scheduling, etc. While travelling along a street segment can be done autonomously by each robot, crossing of an intersection as a shared resource forces the robot to coordinate its actions with those of other robots e.g. by means of negotiations. We discuss the issue of cooperation on the design of a robot control architecture. Task and sensor specific cooperation between robots requires the robots' architectures to be interlinked at different hierarchical levels. Inside each level control cycles are running in parallel and provide fast reaction on events. Internal cooperation may occur between cycles of the same level. Altogether the architecture is matrix-shaped and contains abstract control cycles with a certain degree of autonomy. Based upon the internal structure of a cycle we consider the horizontal and vertical interconnection of cycles to form an individual architecture. Thereafter we examine the linkage of several agents and its influence on an interacting architecture. A prototypical implementation of a scenario, which combines aspects of active vision and cooperation, illustrates our approach. Two vision-guided vehicles are faced with line following, intersection recognition and negotiation.

  18. Multi-robot control interface

    DOEpatents

    Bruemmer, David J [Idaho Falls, ID; Walton, Miles C [Idaho Falls, ID

    2011-12-06

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  19. Canadian space robotic activities

    NASA Astrophysics Data System (ADS)

    Sallaberger, Christian; Space Plan Task Force, Canadian Space Agency

    The Canadian Space Agency has chosen space robotics as one of its key niche areas, and is currently preparing to deliver the first flight elements for the main robotic system of the international space station. The Mobile Servicing System (MSS) is the Canadian contribution to the international space station. It consists of three main elements. The Space Station Remote Manipulator System (SSRMS) is a 7-metre, 7-dof, robotic arm. The Special Purpose Dextrous Manipulator (SPDM), a smaller 2-metre, 7-dof, robotic arm can be used independently, or attached to the end of the SSRMS. The Mobile Base System (MBS) will be used as a support platform and will also provide power and data links for both the SSRMS and the SPDM. A Space Vision System (SVS) has been tested on Shuttle flights, and is being further developed to enhance the autonomous capabilities of the MSS. The CSA also has a Strategic Technologies in Automation and Robotics Program which is developing new technologies to fulfill future robotic space mission needs. This program is currently developing in industry technological capabilities in the areas of automation of operations, autonomous robotics, vision systems, trajectory planning and object avoidance, tactile and proximity sensors, and ground control of space robots. Within the CSA, a robotic testbed and several research programs are also advancing technologies such as haptic devices, control via head-mounted displays, predictive and preview displays, and the dynamic characterization of robotic arms. Canada is also now developing its next Long Term Space Plan. In this context, a planetary exploration program is being considered, which would utilize Canadian space robotic technologies in this new arena.

  20. Serpentine Robot Model and Gait Design Using Autodesk Inventor and Simulink SimMechanics

    NASA Astrophysics Data System (ADS)

    Daniel; Iman Alamsyah, Mohammad; Erwin; Tan, Sofyan

    2014-03-01

    The authors introduce gaits of a serpentine robot with linear expansion mechanism where the robot varies its length using joints with three degrees of freedom. The 3D model of the serpentine robot is drawed in Autocad Inventor® and exported to SimMechanics® for straighforward modeling of the kinematics. The gaits are important for robots designed to explore ruins of disasters where the working spaces are very tight. For maximum flexibility of the serpentine robot, we adopted a joint design with three parallel actuators, where the joint is capable of linear movement in the forward axis, and rotational movements around two other axes. The designed linear expansion gaits is calculated for forward movement when the robot is posing straight or turning laterally.

  1. Babybot: a biologically inspired developing robotic agent

    NASA Astrophysics Data System (ADS)

    Metta, Giorgio; Panerai, Francesco M.; Sandini, Giulio

    2000-10-01

    The study of development, either artificial or biological, can highlight the mechanisms underlying learning and adaptive behavior. We shall argue whether developmental studies might provide a different and potentially interesting perspective either on how to build an artificial adaptive agent, or on understanding how the brain solves sensory, motor, and cognitive tasks. It is our opinion that the acquisition of the proper behavior might indeed be facilitated because within an ecological context, the agent, its adaptive structure and the environment dynamically interact thus constraining the otherwise difficult learning problem. In very general terms we shall describe the proposed approach and supporting biological related facts. In order to further analyze these aspects from the modeling point of view, we shall demonstrate how a twelve degrees of freedom baby humanoid robot acquires orienting and reaching behaviors, and what advantages the proposed framework might offer. In particular, the experimental setup consists of five degrees-of-freedom (dof) robot head, and an off-the-shelf six dof robot manipulator, both mounted on a rotating base: i.e. the torso. From the sensory point of view, the robot is equipped with two space-variant cameras, an inertial sensor simulating the vestibular system, and proprioceptive information through motor encoders. The biological parallel is exploited at many implementation levels. It is worth mentioning, for example, the space- variant eyes, exploiting foveal and peripheral vision in a single arrangement, the inertial sensor providing efficient image stabilization (vestibulo-ocular reflex).

  2. Switch for serial or parallel communication networks

    DOEpatents

    Crosette, Dario B.

    1994-01-01

    A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination.

  3. Switch for serial or parallel communication networks

    DOEpatents

    Crosette, D.B.

    1994-07-19

    A communication switch apparatus and a method for use in a geographically extensive serial, parallel or hybrid communication network linking a multi-processor or parallel processing system has a very low software processing overhead in order to accommodate random burst of high density data. Associated with each processor is a communication switch. A data source and a data destination, a sensor suite or robot for example, may also be associated with a switch. The configuration of the switches in the network are coordinated through a master processor node and depends on the operational phase of the multi-processor network: data acquisition, data processing, and data exchange. The master processor node passes information on the state to be assumed by each switch to the processor node associated with the switch. The processor node then operates a series of multi-state switches internal to each communication switch. The communication switch does not parse and interpret communication protocol and message routing information. During a data acquisition phase, the communication switch couples sensors producing data to the processor node associated with the switch, to a downlink destination on the communications network, or to both. It also may couple an uplink data source to its processor node. During the data exchange phase, the switch couples its processor node or an uplink data source to a downlink destination (which may include a processor node or a robot), or couples an uplink source to its processor node and its processor node to a downlink destination. 9 figs.

  4. Houdini{trademark}: Reconfigurable in-tank mobile robot. Final report, June 1995--January 1997

    SciTech Connect

    Thompson, B.; Slifko, A.

    1998-12-31

    This report details the development of a reconfigurable in-tank robotic cleanup system called Houdini{trademark}. Driven by the general need to develop equipment for the removal of radioactive waste from hundreds of DOE waste storage tanks and the specific needs of DOE sites such as Oak Ridge National Laboratory and Fernald, Houdini{trademark} represents one of the possible tools that can be used to mobilize and retrieve this waste material for complete remediation. Houdini{trademark} is a hydraulically powered, track driven, mobile work vehicle with a collapsible frame designed to enter underground or above ground waste tanks through existing 24 inch riser openings. After the vehicle has entered the waste tank, it unfolds and lands on the waste surface or tank floor to become a remotely operated mini-bulldozer. Houdini{trademark} utilizes a vehicle mounted plow blade and 6-DOF manipulator to mobilize waste and carry other tooling such as sluicing pumps, excavation buckets, and hydraulic shears. The complete Houdini{trademark} system consists of the tracked vehicle and other support equipment (e.g., control console, deployment system, hydraulic power supply, and controller) necessary to deploy and remotely operate this system at any DOE site. Inside the storage tanks, the system is capable of performing heel removal, waste mobilization, waste size reduction, and other tank waste retrieval and decommissioning tasks. The first Houdini{trademark} system was delivered on September 24, 1996 to Oak Ridge National Laboratory (ORNL). The system acceptance test was successfully performed at a cold test facility at ORNL. After completion of the cold test program and the training of site personnel, ORNL will deploy the system for clean-up and remediation of the Gunite storage tanks.

  5. Robotic Intelligence Kernel: Architecture

    SciTech Connect

    2009-09-16

    The INL Robotic Intelligence Kernel Architecture (RIK-A) is a multi-level architecture that supports a dynamic autonomy structure. The RIK-A is used to coalesce hardware for sensing and action as well as software components for perception, communication, behavior and world modeling into a framework that can be used to create behaviors for humans to interact with the robot.

  6. Robot Rodeo 2013

    ScienceCinema

    Deuel, Jake

    2016-07-12

    Sandia National Laboratories hosted the seventh annual Western National Robot Rodeo and Capability Exercise in June 2013. The five-day event is a lively and challenging competition that draws civilian and military bomb squad teams from across the country to see who can most effectively defuse dangerous situations with the help of robots.

  7. Robot Rodeo 2013

    SciTech Connect

    Deuel, Jake

    2013-08-27

    Sandia National Laboratories hosted the seventh annual Western National Robot Rodeo and Capability Exercise in June 2013. The five-day event is a lively and challenging competition that draws civilian and military bomb squad teams from across the country to see who can most effectively defuse dangerous situations with the help of robots.

  8. Next generation space robot

    NASA Technical Reports Server (NTRS)

    Iwata, Tsutomu; Oda, Mitsushige; Imai, Ryoichi

    1989-01-01

    The recent research effort on the next generation space robots is presented. The goals of this research are to develop the fundamental technologies and to acquire the design parameters of the next generation space robot. Visual sensing and perception, dexterous manipulation, man machine interface and artificial intelligence techniques such as task planning are identified as the key technologies.

  9. Real World Robotics.

    ERIC Educational Resources Information Center

    Clark, Lisa J.

    2002-01-01

    Introduces a project for elementary school students in which students build a robot by following instructions and then write a computer program to run their robot by using LabView graphical development software. Uses ROBOLAB curriculum which is designed for grade levels K-12. (YDS)

  10. Robotics technology discipline

    NASA Technical Reports Server (NTRS)

    Montemerlo, Melvin D.

    1990-01-01

    Viewgraphs on robotics technology discipline for Space Station Freedom are presented. Topics covered include: mechanisms; sensors; systems engineering processes for integrated robotics; man/machine cooperative control; 3D-real-time machine perception; multiple arm redundancy control; manipulator control from a movable base; multi-agent reasoning; and surfacing evolution technologies.

  11. Motivating Students with Robotics

    ERIC Educational Resources Information Center

    Brand, Brenda; Collver, Michael; Kasarda, Mary

    2008-01-01

    In recent years, the need to advance the number of individuals pursuing science, technology, engineering, and mathematics fields has gained much attention. The Montgomery County/Virginia Tech Robotics Collaborative (MCVTRC), a yearlong high school robotics program housed in an educational shop facility in Montgomery County, Virginia, seeks to…

  12. Robotics in medicine

    NASA Astrophysics Data System (ADS)

    Kuznetsov, D. N.; Syryamkin, V. I.

    2015-11-01

    Modern technologies play a very important role in our lives. It is hard to imagine how people can get along without personal computers, and companies - without powerful computer centers. Nowadays, many devices make modern medicine more effective. Medicine is developing constantly, so introduction of robots in this sector is a very promising activity. Advances in technology have influenced medicine greatly. Robotic surgery is now actively developing worldwide. Scientists have been carrying out research and practical attempts to create robotic surgeons for more than 20 years, since the mid-80s of the last century. Robotic assistants play an important role in modern medicine. This industry is new enough and is at the early stage of development; despite this, some developments already have worldwide application; they function successfully and bring invaluable help to employees of medical institutions. Today, doctors can perform operations that seemed impossible a few years ago. Such progress in medicine is due to many factors. First, modern operating rooms are equipped with up-to-date equipment, allowing doctors to make operations more accurately and with less risk to the patient. Second, technology has enabled to improve the quality of doctors' training. Various types of robots exist now: assistants, military robots, space, household and medical, of course. Further, we should make a detailed analysis of existing types of robots and their application. The purpose of the article is to illustrate the most popular types of robots used in medicine.

  13. The Uranus Mobile Robot

    DTIC Science & Technology

    1990-09-01

    Schematics 26 Wi List of Figures 1 Neptune and Pluto .. .. .. .. .. ... .. ... ... ... ... .... 2 2 Uranus...began building our first mobile robot, Pluto (see Figure 1 a). We envisioned Pluto as the ultimate indoor robot within the grasp of current technology...smooth arced trajectory while rotating about its center. This omni-directionality combined with very precise positioning would allow Pluto to easily

  14. Neurotechnology for Biomimetic Robots

    DTIC Science & Technology

    2007-11-02

    This award funded in part, the travel of three investigators to the international conference on Neurotechnology for Biomimetic Robots. The three...investigators participated in a conference held at Northeastern University May 14-16 on the subject of ’ Neurotechnology for Biomimetic Robots’. Each

  15. Going Green Robots

    ERIC Educational Resources Information Center

    Nelson, Jacqueline M.

    2011-01-01

    In looking at the interesting shapes and sizes of old computer parts, creating robots quickly came to the author's mind. In this article, she describes how computer parts can be used creatively. Students will surely enjoy creating their very own robots while learning about the importance of recycling in the society. (Contains 1 online resource.)

  16. Robotics and Industrial Arts.

    ERIC Educational Resources Information Center

    Edmison, Glenn A.; And Others

    Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

  17. INL Generic Robot Architecture

    SciTech Connect

    2005-03-30

    The INL Generic Robot Architecture is a generic, extensible software framework that can be applied across a variety of different robot geometries, sensor suites and low-level proprietary control application programming interfaces (e.g. mobility, aria, aware, player, etc.).

  18. Robot Vision Library

    NASA Technical Reports Server (NTRS)

    Howard, Andrew B.; Ansar, Adnan I.; Litwin, Todd E.; Goldberg, Steven B.

    2009-01-01

    The JPL Robot Vision Library (JPLV) provides real-time robot vision algorithms for developers who are not vision specialists. The package includes algorithms for stereo ranging, visual odometry and unsurveyed camera calibration, and has unique support for very wideangle lenses

  19. HELLFIRE 6-DOF Simulation Validation for Stockpile Reliability Program with Seeker Test Data

    DTIC Science & Technology

    1994-09-12

    a Carco table and millimeter- wave simulated target or real target option for live round testing at RTTC’s Test Area 1. STAF is now being built. The...help of COLSA Corporation in the preparation of this document is gratefully acknowledged. I .. .. . . .i I I . , ". I I I I I I I I I I I I TABLE OF...on Missile Performance ............................... 14 I I I U I I I I I I U I ii1 I LIST OF TABLES 5 Table Page I. SRP Test Data Variables Used in

  20. Pershing II Simulation Studies. Debris Dynamics and 2.75 Rocket 6-DOF (Degree of Freedom).

    DTIC Science & Technology

    1983-07-01

    y ^wyy nili ii i...ini n• t • m i •./ i. 1 i• ..• ’J,’<".« r • ’..».’. ^r.*-., y .’ »’.’’•: ’••’irT’.’ y .’ y .’. y .".’. ^, TABLE OF CONTENTS ,w. Page No. I. INTRODUCTION...those of the authors and do not necessarily express or imply policies or positions of the US Army Missile Command. ii wv^ y

  1. Design of an indoor mapping system using three 2D laser scanners and 6 DOF SLAM

    NASA Astrophysics Data System (ADS)

    Vosselman, G.

    2014-08-01

    We present the design for a new indoor mapping system based on three 2D laser scanners as well as a method to process the range measurements such that the pose of the system and the planes of floor, ceiling and walls can be estimated simultaneously. By the combined use of the measurements of all three scanners the pose of the system can be reconstructed in 3D without the need for an IMU. The six pose parameters are modelled as a continuous function over time such that scan line deformations caused by rapid scanner movements do not lead to biases in the estimated poses. The theoretical feasibility of the approach is demonstrated by analysing reconstruction results derived from simulated sensor data of two indoor models. Assuming a perfectly calibrated sensor and ranging noise of 3 cm, the results on data in 10x20 m corridor show that the plane orientation precision is better than 0.1 degree and that the standard deviation of plane-to-plane distances is below 1.5 cm after three loops in the corridor.

  2. Three-dimensional unstructured method for flows past bodies in 6-DOF relative motion

    NASA Technical Reports Server (NTRS)

    Singh, K. P.; Baysal, Oktay

    1995-01-01

    A three dimensional, unstructured-mesh methodology was developed to simulate unsteady flows past bodies in relative motion, where the trajectory was determined from the instantaneous aerodynamics. The method coupled the equations of fluid flow and those of rigid-body dynamics, and captured the time-dependent interference between stationary and moving boundaries. The unsteady, compressible Euler equations were solved on dynamic, unstructured meshes by an explicit, finite-volume, upwind method. The grid adaptation was performed within a window placed around the moving body. The Euler equations of dynamics were solved by a Runge-Kutta integration scheme. The flow solver and the adaptation scheme were validated by simulating the transonic, unsteady flow around a wing undergoing a forced, periodic pitching motion, then comparing the results with the experimental data. To validate the trajectory code, the six-degrees-of-freedom (DOF) motion of a store separating from a wing was computed using the experimentally determined force and moment fields, then comparing with an independently generated trajectory. Finally, the overall methodology was demonstrated by simulating the unsteady flowfield and the trajectory of a store dropped from a wing. The methodology, its computational cost notwithstanding, has proven to be accurate, automated, easy for dynamic gridding, and relatively efficient for the required man-hours.

  3. A preliminary 6 DOF attitude and translation control system design for Starprobe

    NASA Technical Reports Server (NTRS)

    Mak, P.; Mettler, E.; Vijayarahgavan, A.

    1981-01-01

    The extreme thermal environment near perihelion and the high-accuracy gravitational science experiments impose unique design requirements on various subsystems of Starprobe. This paper examines some of these requirements and their impact on the preliminary design of a six-degree-of-freedom attitude and translational control system. Attention is given to design considerations, the baseline attitude/translational control system, system modeling, and simulation studies.

  4. 6-DOF robust adaptive terminal sliding mode control for spacecraft formation flying

    NASA Astrophysics Data System (ADS)

    Wang, Jianying; Sun, Zhaowei

    2012-04-01

    This paper addresses the tracking control problem of the leader-follower spacecraft formation, by which we mean that the relative motion between the leader and the follower is required to track a desired time-varying trajectory given in advance. Using dual number, the six-degree-of-freedom motion of the follower spacecraft relative to the leader spacecraft is modeled, where the coupling effect between the translational motion and the rotational one is accounted. A robust adaptive terminal sliding mode control law, including the adaptive algorithms, is proposed to ensure the finite time convergence of the relative motion tracking errors despite the presence of model uncertainties and external disturbances, based on which a modified controller is furthermore developed to solve the dual-equilibrium problem caused by dual quaternion representation. In addition, to alleviate the chattering, hyperbolic tangent function is adopted to substitute for the sign function. And by theoretical analysis, it is proved that the tracking error in such case will converge to a neighborhood of the origin in finite time. Finally, numerical simulations are performed to demonstrate the validity of the proposed approaches.

  5. System Identification and 6-DOF Hovering Controller Design of Unmanned Model Helicopter

    NASA Astrophysics Data System (ADS)

    Kim, Byeongil; Chang, Yushin; Lee, Man Hyung

    For a maneuvering unmanned autonomous helicopter, it is necessary to design a proper controller for each flight mode. In this paper, the overall helicopter dynamics is derived and a hovering model is linearized and transformed into a state-space form. However, since it is difficult to obtain parameters for stability derivatives in the state-space directly, a linear control model is derived by a time-domain parametric system identification method with real flight data of a model helicopter. Then, two different controllers (a linear feedback controller with the proportional gain and a robust controller) are designed and their performances are compared. The simulation results show outstanding performance. The validated controllers can be utilized to enable autonomous flight of a RUAV (Rotorcraft-based Unmanned Aerial Vehicle).

  6. Parallel digital forensics infrastructure.

    SciTech Connect

    Liebrock, Lorie M.; Duggan, David Patrick

    2009-10-01

    This report documents the architecture and implementation of a Parallel Digital Forensics infrastructure. This infrastructure is necessary for supporting the design, implementation, and testing of new classes of parallel digital forensics tools. Digital Forensics has become extremely difficult with data sets of one terabyte and larger. The only way to overcome the processing time of these large sets is to identify and develop new parallel algorithms for performing the analysis. To support algorithm research, a flexible base infrastructure is required. A candidate architecture for this base infrastructure was designed, instantiated, and tested by this project, in collaboration with New Mexico Tech. Previous infrastructures were not designed and built specifically for the development and testing of parallel algorithms. With the size of forensics data sets only expected to increase significantly, this type of infrastructure support is necessary for continued research in parallel digital forensics. This report documents the implementation of the parallel digital forensics (PDF) infrastructure architecture and implementation.

  7. Honda humanoid robots development.

    PubMed

    Hirose, Masato; Ogawa, Kenichi

    2007-01-15

    Honda has been doing research on robotics since 1986 with a focus upon bipedal walking technology. The research started with straight and static walking of the first prototype two-legged robot. Now, the continuous transition from walking in a straight line to making a turn has been achieved with the latest humanoid robot ASIMO. ASIMO is the most advanced robot of Honda so far in the mechanism and the control system. ASIMO's configuration allows it to operate freely in the human living space. It could be of practical help to humans with its ability of five-finger arms as well as its walking function. The target of further development of ASIMO is to develop a robot to improve life in human society. Much development work will be continued both mechanically and electronically, staying true to Honda's 'challenging spirit'.

  8. Intelligent Articulated Robot

    NASA Astrophysics Data System (ADS)

    Nyein, Aung Kyaw; Thu, Theint Theint

    2008-10-01

    In this paper, an articulated type of industrial used robot is discussed. The robot is mainly intended to be used in pick and place operation. It will sense the object at the specified place and move it to a desired location. A peripheral interface controller (PIC16F84A) is used as the main controller of the robot. Infrared LED and IR receiver unit for object detection and 4-bit bidirectional universal shift registers (74LS194) and high current and high voltage Darlington transistors arrays (ULN2003) for driving the arms' motors are used in this robot. The amount of rotation for each arm is regulated by the limit switches. The operation of the robot is very simple but it has the ability of to overcome resetting position after power failure. It can continue its work from the last position before the power is failed without needing to come back to home position.

  9. [The robotic surgeon training].

    PubMed

    Crestani, Alessandro; Rossanese, Marta; Abbinante, Maria; Calandriello, Mattia; Kungulli, Afrovita; Giannarini, Gianluca; Ficarra, Vincenzo

    2015-10-01

    The widespread robotic surgery in the world highlighted the relevance of the training programs for young urologists and residents. In the last years, urologic societies and some independent robotic surgeons strongly worked to standardize some general and specific training modules. Theoretical and practical sections of robotic training programs have been recently specified. The role of simulators, dry and wet laboratories, bedside assistance, and modular (step-by-step) training at console represent the most relevant elements of robotic surgeon training. Ideally, these didactic tools should be available in modern training centers. The development of structured robotic training programs should be considered as one of the priorities that the urologic community must take into account in the near future.

  10. Introduction to Parallel Computing

    DTIC Science & Technology

    1992-05-01

    Topology C, Ada, C++, Data-parallel FORTRAN, 2D mesh of node boards, each node FORTRAN-90 (late 1992) board has 1 application processor Devopment Tools ...parallel machines become the wave of the present, tools are increasingly needed to assist programmers in creating parallel tasks and coordinating...their activities. Linda was designed to be such a tool . Linda was designed with three important goals in mind: to be portable, efficient, and easy to use

  11. Parallel Wolff Cluster Algorithms

    NASA Astrophysics Data System (ADS)

    Bae, S.; Ko, S. H.; Coddington, P. D.

    The Wolff single-cluster algorithm is the most efficient method known for Monte Carlo simulation of many spin models. Due to the irregular size, shape and position of the Wolff clusters, this method does not easily lend itself to efficient parallel implementation, so that simulations using this method have thus far been confined to workstations and vector machines. Here we present two parallel implementations of this algorithm, and show that one gives fairly good performance on a MIMD parallel computer.

  12. Utilizing Robot Operating System (ROS) in Robot Vision and Control

    DTIC Science & Technology

    2015-09-01

    OPERATING SYSTEM (ROS) IN ROBOT VISION AND CONTROL by Joshua S. Lum September 2015 Thesis Advisor: Xiaoping Yun Co-Advisor: Zac Staples...Master’s Thesis 4. TITLE AND SUBTITLE UTILIZING ROBOT OPERATING SYSTEM (ROS) IN ROBOT VISION AND CONTROL 5. FUNDING NUMBERS 6. AUTHOR(S) Lum, Joshua S...release; distribution is unlimited UTILIZING ROBOT OPERATING SYSTEM (ROS) IN ROBOT VISION AND CONTROL Joshua S. Lum Captain, United States

  13. Expanding Frontiers of Humanoid Robotics

    DTIC Science & Technology

    2000-08-01

    From the IEEE Intelligent Systems Special Issue on Humanoid Robotics , July/August 2000 GUEST EDITORS’ Expanding Frontiers of Humanoid Robotics ...Mark L. Swinson, DARPA David J. Bruemmer, Strategic Analysis Mobile robots pose a unique set of challenges to artificial intelligence researchers...the constraints of logical correctness but also some assortment of crosscutting, physical constraints. Particularly interesting among these robots

  14. Robots in Space -Psychological Aspects

    NASA Technical Reports Server (NTRS)

    Sipes, Walter E.

    2006-01-01

    A viewgraph presentation on the psychological aspects of developing robots to perform routine operations associated with monitoring, inspection, maintenance and repair in space is shown. The topics include: 1) Purpose; 2) Vision; 3) Current Robots in Space; 4) Ground Based Robots; 5) AERCam; 6) Rotating Bladder Robot (ROBLR); 7) DART; 8) Robonaut; 9) Full Immersion Telepresence Testbed; 10) ERA; and 11) Psychological Aspects

  15. [Application of robots in stomatology].

    PubMed

    Zhou, Meng-Qi; Zhang, Jin-Ning; Hong, Jin

    2016-10-01

    Recently, the robot technology has been developed rapidly and the medical robot has been used in many clinical areas, especially in the field of stomatology. The application of robot in stomatology will break the traditional mode of treatment and bring a new technological revolution. This paper introduced the advantages, the current situation and the development prospect of applying robot in stomatology.

  16. A robot arm simulation with a shared memory multiprocessor machine

    NASA Technical Reports Server (NTRS)

    Kim, Sung-Soo; Chuang, Li-Ping

    1989-01-01

    A parallel processing scheme for a single chain robot arm is presented for high speed computation on a shared memory multiprocessor. A recursive formulation that is derived from a virtual work form of the d'Alembert equations of motion is utilized for robot arm dynamics. A joint drive system that consists of a motor rotor and gears is included in the arm dynamics model, in order to take into account gyroscopic effects due to the spinning of the rotor. The fine grain parallelism of mechanical and control subsystem models is exploited, based on independent computation associated with bodies, joint drive systems, and controllers. Efficiency and effectiveness of the parallel scheme are demonstrated through simulations of a telerobotic manipulator arm. Two different mechanical subsystem models, i.e., with and without gyroscopic effects, are compared, to show the trade-off between efficiency and accuracy.

  17. PCLIPS: Parallel CLIPS

    NASA Technical Reports Server (NTRS)

    Hall, Lawrence O.; Bennett, Bonnie H.; Tello, Ivan

    1994-01-01

    A parallel version of CLIPS 5.1 has been developed to run on Intel Hypercubes. The user interface is the same as that for CLIPS with some added commands to allow for parallel calls. A complete version of CLIPS runs on each node of the hypercube. The system has been instrumented to display the time spent in the match, recognize, and act cycles on each node. Only rule-level parallelism is supported. Parallel commands enable the assertion and retraction of facts to/from remote nodes working memory. Parallel CLIPS was used to implement a knowledge-based command, control, communications, and intelligence (C(sup 3)I) system to demonstrate the fusion of high-level, disparate sources. We discuss the nature of the information fusion problem, our approach, and implementation. Parallel CLIPS has also be used to run several benchmark parallel knowledge bases such as one to set up a cafeteria. Results show from running Parallel CLIPS with parallel knowledge base partitions indicate that significant speed increases, including superlinear in some cases, are possible.

  18. Application Portable Parallel Library

    NASA Technical Reports Server (NTRS)

    Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott

    1995-01-01

    Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

  19. Parallel Algorithms and Patterns

    SciTech Connect

    Robey, Robert W.

    2016-06-16

    This is a powerpoint presentation on parallel algorithms and patterns. A parallel algorithm is a well-defined, step-by-step computational procedure that emphasizes concurrency to solve a problem. Examples of problems include: Sorting, searching, optimization, matrix operations. A parallel pattern is a computational step in a sequence of independent, potentially concurrent operations that occurs in diverse scenarios with some frequency. Examples are: Reductions, prefix scans, ghost cell updates. We only touch on parallel patterns in this presentation. It really deserves its own detailed discussion which Gabe Rockefeller would like to develop.

  20. A Survey of Space Robotics

    NASA Technical Reports Server (NTRS)

    Pedersen, L.; Kortenkamp, D.; Wettergreen, D.; Nourbakhsh, I.; Korsmeyer, David (Technical Monitor)

    2003-01-01

    In this paper we summarize a survey conducted by NASA to determine the state-of-the-art in space robotics and to predict future robotic capabilities under either nominal and intensive development effort. The space robotics assessment study examined both in-space operations including assembly, inspection, and maintenance and planetary surface operations like mobility and exploration. Applications of robotic autonomy and human-robot cooperation were considered. The study group devised a decomposition of robotic capabilities and then suggested metrics to specify the technical challenges associated with each. The conclusion of this paper identifies possible areas in which investment in space robotics could lead to significant advances of important technologies.

  1. Robotic Surgery for Thoracic Disease.

    PubMed

    Yamashita, Shin-Ichi; Yoshida, Yasuhiro; Iwasaki, Akinori

    2016-01-01

    Robotic surgeries have developed in the general thoracic field over the past decade, and publications on robotic surgery outcomes have accumulated. However, controversy remains about the application of robotic surgery, with a lack of well-established evidence. Robotic surgery has several advantages such as natural movement of the surgeon's hands when manipulating the robotic arms and instruments controlled by computer-assisted systems. Most studies have reported the feasibility and safety of robotic surgery based on acceptable morbidity and mortality compared to open or video-assisted thoracic surgery (VATS). Furthermore, there are accumulated data to indicate longer operation times and shorter hospital stay in robotic surgery. However, randomized controlled trials between robotic and open or VATS procedures are needed to clarify the advantage of robotic surgery. In this review, we focused the literature about robotic surgery used to treat lung cancer and mediastinal tumor.

  2. Partner Ballroom Dance Robot -PBDR-

    NASA Astrophysics Data System (ADS)

    Kosuge, Kazuhiro; Takeda, Takahiro; Hirata, Yasuhisa; Endo, Mitsuru; Nomura, Minoru; Sakai, Kazuhisa; Koizumi, Mizuo; Oconogi, Tatsuya

    In this research, we have developed a dance partner robot, which has been developed as a platform for realizing the effective human-robot coordination with physical interaction. The robot could estimate the next dance step intended by a human and dance the step with the human. This paper introduce the robot referred to as PBDR (Partner Ballroom Dance Robot), which has performed graceful dancing with the human in EXPO 2005, Aichi, Japan.

  3. Guarded Motion for Mobile Robots

    SciTech Connect

    2005-03-30

    The Idaho National Laboratory (INL) has created codes that ensure that a robot will come to a stop at a precise, specified distance from any obstacle regardless of the robot's initial speed, its physical characteristics, and the responsiveness of the low-level motor control schema. This Guarded Motion for Mobile Robots system iteratively adjusts the robot's action in response to information about the robot's environment.

  4. Parallel Lisp simulator

    SciTech Connect

    Weening, J.S.

    1988-05-01

    CSIM is a simulator for parallel Lisp, based on a continuation passing interpreter. It models a shared-memory multiprocessor executing programs written in Common Lisp, extended with several primitives for creating and controlling processes. This paper describes the structure of the simulator, measures its performance, and gives an example of its use with a parallel Lisp program.

  5. Parallel and Distributed Computing.

    DTIC Science & Technology

    1986-12-12

    program was devoted to parallel and distributed computing . Support for this part of the program was obtained from the present Army contract and a...Umesh Vazirani. A workshop on parallel and distributed computing was held from May 19 to May 23, 1986 and drew 141 participants. Keywords: Mathematical programming; Protocols; Randomized algorithms. (Author)

  6. Micro autonomous robotic system

    NASA Astrophysics Data System (ADS)

    Ishihara, Hidenori; Fukuda, Toshio

    1995-12-01

    This paper deals with the structural proposal of the micro autonomous robotic system, and shows the design of the prototype. We aim at developing the micro robot, which autonomously acts based on its detection, in order to propose a solution to constitute the micro autonomous robotic system. However, as miniaturizing the size, the number of the sensors gets restricted and the information from them becomes lack. Lack of the information makes it difficult to realize an intelligence of quality. Because of that, the micro robotic system needs to develop the simple algorithm. In this paper, we propose the simply logical algorithms to control the actuator, and show the performance of the micro robot controlled by them, and design the Micro Line Trace Robot, which dimension is about 1 cm cube and which moves along the black line on the white-colored ground, and the programmable micro autonomous robot, which dimension is about 2 cm cube and which performs according to the program optionally.

  7. Future of robotic surgery.

    PubMed

    Lendvay, Thomas Sean; Hannaford, Blake; Satava, Richard M

    2013-01-01

    In just over a decade, robotic surgery has penetrated almost every surgical subspecialty and has even replaced some of the most commonly performed open oncologic procedures. The initial reports on patient outcomes yielded mixed results, but as more medical centers develop high-volume robotics programs, outcomes appear comparable if not improved for some applications. There are limitations to the current commercially available system, and new robotic platforms, some designed to compete in the current market and some to address niche surgical considerations, are being developed that will change the robotic landscape in the next decade. Adoption of these new systems will be dependent on overcoming barriers to true telesurgery that range from legal to logistical. As additional surgical disciplines embrace robotics and open surgery continues to be replaced by robotic approaches, it will be imperative that adequate education and training keep pace with technology. Methods to enhance surgical performance in robotics through the use of simulation and telementoring promise to accelerate learning curves and perhaps even improve surgical readiness through brief virtual-reality warm-ups and presurgical rehearsal. All these advances will need to be carefully and rigorously validated through not only patient outcomes, but also cost efficiency.

  8. Robotic comfort zones

    NASA Astrophysics Data System (ADS)

    Likhachev, Maxim; Arkin, Ronald C.

    2000-10-01

    The paper investigates how the psychological notion of comfort can be useful in the design of robotic systems. A review of the existing study of human comfort, especially regarding its presence in infants, is conducted with the goal being to determine the relevant characteristics for mapping it onto the robotics domain. Focus is place on the identification of the salient features in the environment that affect the comfort level. Factors involved include current state familiarity, working conditions, the amount and location of available resources, etc. As part of our newly developed comfort function theory, the notion of an object as a psychological attachment for a robot is also introduced, as espoused in Bowlby's theory of attachment. The output space of the comfort function and its dependency on the comfort level are analyzed. The results of the derivation of this comfort function are then presented in terms of the impact they have on robotic behavior. Justification for the use of the comfort function are then presented in terms of the impact they have on robotic behavior. Justification for the use of the comfort function in the domain of robotics is presented with relevance for real-world operations. Also, a transformation of the theoretical discussion into a mathematical framework suitable for implementation within a behavior-based control system is presented. The paper concludes with results of simulation studies and real robot experiments using the derived comfort function.

  9. Autonomous mobile robot

    SciTech Connect

    Mattaboni, P.J.

    1987-01-20

    This patent describes a mobile robot of the type having (a) a vision system, (b) memory means for storing data derived from the robot vision system, and (c) a computer for processing data derived from the robot's vision system, the improvement wherein the robot's vision system comprises (i) a first array of ranging transducers for obtaining data on the position and distance of far objects in a volume of space, the transducers of the first array being symmetrically disposed on the mobile robot with respect to an axis of symmetry within the mobile robot. Each transducer of the first array is fixed in position with respect to that axis of symmetry and sees a portion of the volume of space seen by its entire array; (ii) a second array of ranging transducers for obtaining data of the position and distance of near objects in the same or an overlapping volume of space, the transducers of the second array being symmetrically disposed on the mobile robot with respect to the axis of symmetry. Each transducer of the second array is fixed in position with respect to the axis of symmetry and sees a portion of the volume of space seen by its entire array, the angle of view of the transducers of the second array being different from the angle of view of the transducers of the first array with respect to the same object in space; and (iii) means for polling the ranging transducers in sequences determined by the computer.

  10. Toward cognitive robotics

    NASA Astrophysics Data System (ADS)

    Laird, John E.

    2009-05-01

    Our long-term goal is to develop autonomous robotic systems that have the cognitive abilities of humans, including communication, coordination, adapting to novel situations, and learning through experience. Our approach rests on the recent integration of the Soar cognitive architecture with both virtual and physical robotic systems. Soar has been used to develop a wide variety of knowledge-rich agents for complex virtual environments, including distributed training environments and interactive computer games. For development and testing in robotic virtual environments, Soar interfaces to a variety of robotic simulators and a simple mobile robot. We have recently made significant extensions to Soar that add new memories and new non-symbolic reasoning to Soar's original symbolic processing, which should significantly improve Soar abilities for control of robots. These extensions include episodic memory, semantic memory, reinforcement learning, and mental imagery. Episodic memory and semantic memory support the learning and recalling of prior events and situations as well as facts about the world. Reinforcement learning provides the ability of the system to tune its procedural knowledge - knowledge about how to do things. Mental imagery supports the use of diagrammatic and visual representations that are critical to support spatial reasoning. We speculate on the future of unmanned systems and the need for cognitive robotics to support dynamic instruction and taskability.

  11. Parallel-Processing Software for Correlating Stereo Images

    NASA Technical Reports Server (NTRS)

    Klimeck, Gerhard; Deen, Robert; Mcauley, Michael; DeJong, Eric

    2007-01-01

    A computer program implements parallel- processing algorithms for cor relating images of terrain acquired by stereoscopic pairs of digital stereo cameras on an exploratory robotic vehicle (e.g., a Mars rove r). Such correlations are used to create three-dimensional computatio nal models of the terrain for navigation. In this program, the scene viewed by the cameras is segmented into subimages. Each subimage is assigned to one of a number of central processing units (CPUs) opera ting simultaneously.

  12. Flocking algorithm for autonomous flying robots.

    PubMed

    Virágh, Csaba; Vásárhelyi, Gábor; Tarcai, Norbert; Szörényi, Tamás; Somorjai, Gergő; Nepusz, Tamás; Vicsek, Tamás

    2014-06-01

    Animal swarms displaying a variety of typical flocking patterns would not exist without the underlying safe, optimal and stable dynamics of the individuals. The emergence of these universal patterns can be efficiently reconstructed with agent-based models. If we want to reproduce these patterns with artificial systems, such as autonomous aerial robots, agent-based models can also be used in their control algorithms. However, finding the proper algorithms and thus understanding the essential characteristics of the emergent collective behaviour requires thorough and realistic modeling of the robot and also the environment. In this paper, we first present an abstract mathematical model of an autonomous flying robot. The model takes into account several realistic features, such as time delay and locality of communication, inaccuracy of the on-board sensors and inertial effects. We present two decentralized control algorithms. One is based on a simple self-propelled flocking model of animal collective motion, the other is a collective target tracking algorithm. Both algorithms contain a viscous friction-like term, which aligns the velocities of neighbouring agents parallel to each other. We show that this term can be essential for reducing the inherent instabilities of such a noisy and delayed realistic system. We discuss simulation results on the stability of the control algorithms, and perform real experiments to show the applicability of the algorithms on a group of autonomous quadcopters. In our case, bio-inspiration works in two ways. On the one hand, the whole idea of trying to build and control a swarm of robots comes from the observation that birds tend to flock to optimize their behaviour as a group. On the other hand, by using a realistic simulation framework and studying the group behaviour of autonomous robots we can learn about the major factors influencing the flight of bird flocks.

  13. Massively parallel mathematical sieves

    SciTech Connect

    Montry, G.R.

    1989-01-01

    The Sieve of Eratosthenes is a well-known algorithm for finding all prime numbers in a given subset of integers. A parallel version of the Sieve is described that produces computational speedups over 800 on a hypercube with 1,024 processing elements for problems of fixed size. Computational speedups as high as 980 are achieved when the problem size per processor is fixed. The method of parallelization generalizes to other sieves and will be efficient on any ensemble architecture. We investigate two highly parallel sieves using scattered decomposition and compare their performance on a hypercube multiprocessor. A comparison of different parallelization techniques for the sieve illustrates the trade-offs necessary in the design and implementation of massively parallel algorithms for large ensemble computers.

  14. Totally parallel multilevel algorithms

    NASA Technical Reports Server (NTRS)

    Frederickson, Paul O.

    1988-01-01

    Four totally parallel algorithms for the solution of a sparse linear system have common characteristics which become quite apparent when they are implemented on a highly parallel hypercube such as the CM2. These four algorithms are Parallel Superconvergent Multigrid (PSMG) of Frederickson and McBryan, Robust Multigrid (RMG) of Hackbusch, the FFT based Spectral Algorithm, and Parallel Cyclic Reduction. In fact, all four can be formulated as particular cases of the same totally parallel multilevel algorithm, which are referred to as TPMA. In certain cases the spectral radius of TPMA is zero, and it is recognized to be a direct algorithm. In many other cases the spectral radius, although not zero, is small enough that a single iteration per timestep keeps the local error within the required tolerance.

  15. Parallel computing works

    SciTech Connect

    Not Available

    1991-10-23

    An account of the Caltech Concurrent Computation Program (C{sup 3}P), a five year project that focused on answering the question: Can parallel computers be used to do large-scale scientific computations '' As the title indicates, the question is answered in the affirmative, by implementing numerous scientific applications on real parallel computers and doing computations that produced new scientific results. In the process of doing so, C{sup 3}P helped design and build several new computers, designed and implemented basic system software, developed algorithms for frequently used mathematical computations on massively parallel machines, devised performance models and measured the performance of many computers, and created a high performance computing facility based exclusively on parallel computers. While the initial focus of C{sup 3}P was the hypercube architecture developed by C. Seitz, many of the methods developed and lessons learned have been applied successfully on other massively parallel architectures.

  16. Door breaching robotic manipulator

    NASA Astrophysics Data System (ADS)

    Schoenfeld, Erik; Parrington, Lawrence; von Muehlen, Stephan

    2008-04-01

    As unmanned systems become more commonplace in military, police, and other security forces, they are tasked to perform missions that the original hardware was not designed for. Current military robots are built for rough outdoor conditions and have strong inflexible manipulators designed to handle a wide range of operations. However, these manipulators are not well suited for some essential indoor tasks, including opening doors. This is a complicated kinematic task that places prohibitively difficult control challenges on the robot and the operator. Honeybee and iRobot have designed a modular door-breaching manipulator that mechanically simplifies the demands upon operator and robot. The manipulator connects to the existing robotic arm of the iRobot PackBot EOD. The gripper is optimized for grasping a variety of door knobs, levers, and car-door handles. It works in conjunction with a compliant wrist and magnetic lock-out mechanism that allows the wrist to remain rigid until the gripper has a firm grasp of the handle and then bend with its rotation and the swing of the door. Once the door is unlatched, the operator simply drives the robot through the doorway while the wrist compensates for the complex, multiple degree-of-freedom motion of the door. Once in the doorway the operator releases the handle, the wrist pops back into place, and the robot is ready for the next door. The new manipulator dramatically improves a robot's ability to non-destructively breach doors and perform an inspection of a room's content, a capability that was previously out of reach of unmanned systems.

  17. Soft Robotics: New Perspectives for Robot Bodyware and Control

    PubMed Central

    Laschi, Cecilia; Cianchetti, Matteo

    2014-01-01

    The remarkable advances of robotics in the last 50 years, which represent an incredible wealth of knowledge, are based on the fundamental assumption that robots are chains of rigid links. The use of soft materials in robotics, driven not only by new scientific paradigms (biomimetics, morphological computation, and others), but also by many applications (biomedical, service, rescue robots, and many more), is going to overcome these basic assumptions and makes the well-known theories and techniques poorly applicable, opening new perspectives for robot design and control. The current examples of soft robots represent a variety of solutions for actuation and control. Though very first steps, they have the potential for a radical technological change. Soft robotics is not just a new direction of technological development, but a novel approach to robotics, unhinging its fundamentals, with the potential to produce a new generation of robots, in the support of humans in our natural environments. PMID:25022259

  18. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  19. Autonomous mobile robot teams

    NASA Technical Reports Server (NTRS)

    Agah, Arvin; Bekey, George A.

    1994-01-01

    This paper describes autonomous mobile robot teams performing tasks in unstructured environments. The behavior and the intelligence of the group is distributed, and the system does not include a central command base or leader. The novel concept of the Tropism-Based Cognitive Architecture is introduced, which is used by the robots in order to produce behavior transforming their sensory information to proper action. The results of a number of simulation experiments are presented. These experiments include worlds where the robot teams must locate, decompose, and gather objects, and defend themselves against hostile predators, while navigating around stationary and mobile obstacles.

  20. Modelling robot construction systems

    NASA Technical Reports Server (NTRS)

    Grasso, Chris

    1990-01-01

    TROTER's are small, inexpensive robots that can work together to accomplish sophisticated construction tasks. To understand the issues involved in designing and operating a team of TROTER's, the robots and their components are being modeled. A TROTER system that features standardized component behavior is introduced. An object-oriented model implemented in the Smalltalk programming language is described and the advantages of the object-oriented approach for simulating robot and component interactions are discussed. The presentation includes preliminary results and a discussion of outstanding issues.

  1. Advanced mechanisms for robotics

    NASA Technical Reports Server (NTRS)

    Vranish, John M.

    1991-01-01

    An overview of applied research and development at the Goddard Space Flight Center (GSFC) on mechanisms and collision avoidance skin for robots is presented. The work on robot end effectors is outlined, followed by a brief discussion of robot-friendly payload latching mechanisms and compliant joints. This is followed by discussions of the collision avoidance/management skin and the GSFC research on magnetorestrictive direct drive motors. A new project, the artificial muscle, is introduced. Each of the devices is described sufficiently to permit a basic understanding of its purpose, capabilities, and operating fundamentals. The implications for commercialization are discussed.

  2. Robotics in shoulder rehabilitation

    PubMed Central

    Sicuri, Chiara; Porcellini, Giuseppe; Merolla, Giovanni

    2014-01-01

    Summary In the last few decades, several researches have been conducted in the field of robotic rehabilitation to meet the intensive, repetitive and task-oriented training, with the goal to recover the motor function. Up to now, robotic rehabilitation studies of the upper extremity have generally focused on stroke survivors leaving less explored the field of orthopaedic shoulder rehabilitation. In this review we analyse the present status of robotic technologies, in order to understand which are the current indications and which may be the future perspective for their application in both neurological and orthopaedic shoulder rehabilitation. PMID:25332937

  3. Robotics: An introduction

    SciTech Connect

    Mc Cloy, D.; Harris, D.

    1986-01-01

    This book is an account encompassing the entire range of disciplines involved in robotics: mechanical, electrical, electronic, and software design, as well as the related technologies of pick-and-place devices, walking machines, teleoperators, and prosthetics. The book explores the evolution of robotics and major trends in the field, and covers an array of robot configurations and mechanisms. It also looks at fundamentals such as actuation, control, measurement, computers, sensing and interaction with the environment, and pattern recognition. Important economic and financial aspects as well as safety and social implications are detailed.

  4. Robots and telechirs

    SciTech Connect

    Thring, M.W.

    1985-01-01

    This volume outlines an engineering approach and includes relevant social aspects of the impact of robotic automation. The book explains the basic principles and theory, discusses design and investigates current methods to produce practical, reliable robots. Specific topics include the theory and practice of mechanical arms, hands and legs. The use of robotics in industry and of telechirs in mines, underwater, and in such dangerous situations as handling explosives are also covered, as are the mechanisms of the human body in doing these tasks.

  5. Joint Robotics Program

    DTIC Science & Technology

    2008-04-23

    Åèìáëáíáçå= oÉëÉ~êÅÜ=póãéçëáìã= JOINT ROBOTICS PROGRAM Published: 23 April 2008 by Joel Brown and Paul Varian 5th Annual Acquisition Research...3. DATES COVERED 00-00-2008 to 00-00-2008 4. TITLE AND SUBTITLE Joint Robotics Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...ëóåÉêÖó=Ñçê=áåÑçêãÉÇ=ÅÜ~åÖÉ=======- 464 - = = Joint Robotics Program Presenter: Joel Brown, Defense Acquisition University Author: Paul Varian

  6. Artificial Intelligence and Robotics.

    DTIC Science & Technology

    1982-09-20

    8217’AD-A122 414 ARTIFICIAL INTELLIGENCE AND ROBOTICS (.) ARMY SCIENCE 1/j 13OARD WA SH INGTON Od I C PEDEN ET AL. 20 SEP 82 UNCLASSIFIED F/G 15/3 NL LEE...AND ACQUISITION WASHINGTON, D. C. 20310 A RMY CIENCE BOARD AD HOC SUBGROUP REPORT ON ARTIFICIAL INTELLIGENCE AND ROBOTICS SEPTEMBER 1982 DTIC DEC 1 5...TITLE (aid Subtitle) S TYPE OF REPORT & PERIOD COVERED Army Science Board AHSG Report Final Artificial Intelligence and Robotics S. PERFORMING ORG

  7. Robots in astronomy

    NASA Astrophysics Data System (ADS)

    Baruch, John E. F.

    A development history and a development trends evaluation are presented for the growth of automation and robotics in industry and in observational astronomy, with a view to the distinctive problems of each field of application. Recent concepts concerning the astronomical use of robots as personal assistants are noted, and an effort is made to discern ways in which technology guides both methods and perceptions. Current programs for robotic and automated telescope development are noted, and it is argued that international standards should soon be formulated for this technology.

  8. MVACS Robotic Arm

    NASA Technical Reports Server (NTRS)

    Bonitz, R.; Slostad, J.; Bon, B.; Braun, D.; Brill, R.; Buck, C.; Fleischner, R.; Haldeman, A.; Herman, J.; Hertzel, M.; Noon, D.; Pixler, G.; Schenker, P.; Ton, T.; Tucker, C.; Zimmerman, W.

    2000-01-01

    The primary purpose of the Mars Volatiles and Climate Surveyor (MVACS) Robotic Arm is to support to the other MVACS science instruments by digging trenches in the Martian soil; acquiring and dumping soil samples into the thermal evolved gas analyzer (TEGA); positioning the Soil Temperature Probe (STP) in the soil: positioning the Robotic Arm Air Temperature Sensor (RAATS) at various heights above the surface, and positioning the Robotic Arm Camera (RAC) for taking images of the surface, trench, soil samples, magnetic targets and other objects of scientific interest within its workspace.

  9. Architecture for robot intelligence

    NASA Technical Reports Server (NTRS)

    Peters, II, Richard Alan (Inventor)

    2004-01-01

    An architecture for robot intelligence enables a robot to learn new behaviors and create new behavior sequences autonomously and interact with a dynamically changing environment. Sensory information is mapped onto a Sensory Ego-Sphere (SES) that rapidly identifies important changes in the environment and functions much like short term memory. Behaviors are stored in a DBAM that creates an active map from the robot's current state to a goal state and functions much like long term memory. A dream state converts recent activities stored in the SES and creates or modifies behaviors in the DBAM.

  10. Parallel algorithms and architectures for the manipulator inertia matrix

    SciTech Connect

    Amin-Javaheri, M.

    1989-01-01

    Several parallel algorithms and architectures to compute the manipulator inertia matrix in real time are proposed. An O(N) and an O(log{sub 2}N) parallel algorithm based upon recursive computation of the inertial parameters of sets of composite rigid bodies are formulated. One- and two-dimensional systolic architectures are presented to implement the O(N) parallel algorithm. A cube architecture is employed to implement the diagonal element of the inertia matrix in O(log{sub 2}N) time and the upper off-diagonal elements in O(N) time. The resulting K{sub 1}O(N) + K{sub 2}O(log{sub 2}N) parallel algorithm is more efficient for a cube network implementation. All the architectural configurations are based upon a VLSI Robotics Processor exploiting fine-grain parallelism. In evaluation all the architectural configurations, significant performance parameters such as I/O time and idle time due to processor synchronization as well as CPU utilization and on-chip memory size are fully included. The O(N) and O(log{sub 2}N) parallel algorithms adhere to the precedence relationships among the processors. In order to achieve a higher speedup factor; however, parallel algorithms in conjunction with Non-Strict Computational Models are devised to relax interprocess precedence, and as a result, to decrease the effective computational delays. The effectiveness of the Non-strict Computational Algorithms is verified by computer simulations, based on a PUMA 560 robot manipulator. It is demonstrated that a combination of parallel algorithms and architectures results in a very effective approach to achieve real-time response for computing the manipulator inertia matrix.

  11. TAIPAN instrument fibre positioner and Starbug robots: engineering overview

    NASA Astrophysics Data System (ADS)

    Staszak, Nicholas F.; Lawrence, Jon; Brown, David M.; Brown, Rebecca; Zhelem, Ross; Goodwin, Michael; Kuehn, Kyler; Lorente, Nuria P. F.; Nichani, Vijay; Waller, Lew; Case, Scott; Content, Robert; Hopkins, Andrew M.; Klauser, Urs; Pai, Naveen; Mueller, Rolf; Mali, Slavko; Vuong, Minh V.

    2016-07-01

    TAIPAN will conduct a stellar and galaxy survey of the Southern sky. The TAIPAN positioner is being developed as a prototype for the MANIFEST instrument on the GMT. The design for TAIPAN incorporates 150 optical fibres (with an upgrade path to 300) situated within independently controlled robotic positioners known as Starbugs. Starbugs allow precise parallel positioning of individual fibres, thus significantly reducing instrument configuration time and increasing the amount of observing time. Presented is an engineering overview of the UKST upgrade of the completely new Instrument Spider Assembly utilized to support the Starbug Fibre Positioning Robot and current status of the Starbug itself.

  12. Biomimetic smart sensors for autonomous robotic behavior I: acoustic processing

    NASA Astrophysics Data System (ADS)

    Deligeorges, Socrates; Xue, Shuwan; Soloway, Aaron; Lichtenstein, Lee; Gore, Tyler; Hubbard, Allyn

    2009-05-01

    Robotics are rapidly becoming an integral tool on the battlefield and in homeland security, replacing humans in hazardous conditions. To enhance the effectiveness of robotic assets and their interaction with human operators, smart sensors are required to give more autonomous function to robotic platforms. Biologically inspired sensors are an essential part of this development of autonomous behavior and can increase both capability and performance of robotic systems. Smart, biologically inspired acoustic sensors have the potential to extend autonomous capabilities of robotic platforms to include sniper detection, vehicle tracking, personnel detection, and general acoustic monitoring. The key to enabling these capabilities is biomimetic acoustic processing using a time domain processing method based on the neural structures of the mammalian auditory system. These biologically inspired algorithms replicate the extremely adaptive processing of the auditory system yielding high sensitivity over broad dynamic range. The algorithms provide tremendous robustness in noisy and echoic spaces; properties necessary for autonomous function in real world acoustic environments. These biomimetic acoustic algorithms also provide highly accurate localization of both persistent and transient sounds over a wide frequency range, using baselines on the order of only inches. A specialized smart sensor has been developed to interface with an iRobot Packbot® platform specifically to enhance its autonomous behaviors in response to personnel and gunfire. The low power, highly parallel biomimetic processor, in conjunction with a biomimetic vestibular system (discussed in the companion paper), has shown the system's autonomous response to gunfire in complicated acoustic environments to be highly effective.

  13. Analysis of a closed-kinematic chain robot manipulator

    NASA Technical Reports Server (NTRS)

    Nguyen, Charles C.; Pooran, Farhad J.

    1988-01-01

    Presented are the research results from the research grant entitled: Active Control of Robot Manipulators, sponsored by the Goddard Space Flight Center (NASA) under grant number NAG-780. This report considers a class of robot manipulators based on the closed-kinematic chain mechanism (CKCM). This type of robot manipulators mainly consists of two platforms, one is stationary and the other moving, and they are coupled together through a number of in-parallel actuators. Using spatial geometry and homogeneous transformation, a closed-form solution is derived for the inverse kinematic problem of the six-degree-of-freedom manipulator, built to study robotic assembly in space. Iterative Newton Raphson method is employed to solve the forward kinematic problem. Finally, the equations of motion of the above manipulators are obtained by employing the Lagrangian method. Study of the manipulator dynamics is performed using computer simulation whose results show that the robot actuating forces are strongly dependent on the mass and centroid locations of the robot links.

  14. Software Architecture for Planetary and Lunar Robotics

    NASA Technical Reports Server (NTRS)

    Utz, Hans; Fong, Teny; Nesnas, Iasa A. D.

    2006-01-01

    A viewgraph presentation on the role that software architecture plays in space and lunar robotics is shown. The topics include: 1) The Intelligent Robotics Group; 2) The Lunar Mission; 3) Lunar Robotics; and 4) Software Architecture for Space Robotics.

  15. Miniature in vivo robotics and novel robotic surgical platforms.

    PubMed

    Shah, Bhavin C; Buettner, Shelby L; Lehman, Amy C; Farritor, Shane M; Oleynikov, Dmitry

    2009-05-01

    Robotic surgical systems, such as the da Vinci Surgical System (Intuitive Surgical, Inc., Sunnyvale, California), have revolutionized laparoscopic surgery but are limited by large size, increased costs, and limitations in imaging. Miniature in vivo robots are being developed that are inserted entirely into the peritoneal cavity for laparoscopic and natural orifice transluminal endoscopic surgical (NOTES) procedures. In the future, miniature camera robots and microrobots should be able to provide a mobile viewing platform. This article discusses the current state of miniature robotics and novel robotic surgical platforms and the development of future robotic technology for general surgery and urology.

  16. Continuum limbed robots for locomotion

    NASA Astrophysics Data System (ADS)

    Mutlu, Alper

    This thesis focuses on continuum robots based on pneumatic muscle technology. We introduce a novel approach to use these muscles as limbs of lightweight legged robots. The flexibility of the continuum legs of these robots offers the potential to perform some duties that are not possible with classical rigid-link robots. Potential applications are as space robots in low gravity, and as cave explorer robots. The thesis covers the fabrication process of continuum pneumatic muscles and limbs. It also provides some new experimental data on this technology. Afterwards, the designs of two different novel continuum robots - one tripod, one quadruped - are introduced. Experimental data from tests using the robots is provided. The experimental results are the first published example of locomotion with tripod and quadruped continuum legged robots. Finally, discussion of the results and how far this technology can go forward is presented.

  17. Robotics and remote systems applications

    SciTech Connect

    Rabold, D.E.

    1996-05-01

    This article is a review of numerous remote inspection techniques in use at the Savannah River (and other) facilities. These include: (1) reactor tank inspection robot, (2) californium waste removal robot, (3) fuel rod lubrication robot, (4) cesium source manipulation robot, (5) tank 13 survey and decontamination robots, (6) hot gang valve corridor decontamination and junction box removal robots, (7) lead removal from deionizer vessels robot, (8) HB line cleanup robot, (9) remote operation of a front end loader at WIPP, (10) remote overhead video extendible robot, (11) semi-intelligent mobile observing navigator, (12) remote camera systems in the SRS canyons, (13) cameras and borescope for the DWPF, (14) Hanford waste tank camera system, (15) in-tank precipitation camera system, (16) F-area retention basin pipe crawler, (17) waste tank wall crawler and annulus camera, (18) duct inspection, and (19) deionizer resin sampling.

  18. Robotic follow system and method

    DOEpatents

    Bruemmer, David J [Idaho Falls, ID; Anderson, Matthew O [Idaho Falls, ID

    2007-05-01

    Robot platforms, methods, and computer media are disclosed. The robot platform includes perceptors, locomotors, and a system controller, which executes instructions for a robot to follow a target in its environment. The method includes receiving a target bearing and sensing whether the robot is blocked front. If the robot is blocked in front, then the robot's motion is adjusted to avoid the nearest obstacle in front. If the robot is not blocked in front, then the method senses whether the robot is blocked toward the target bearing and if so, sets the rotational direction opposite from the target bearing, and adjusts the rotational velocity and translational velocity. If the robot is not blocked toward the target bearing, then the rotational velocity is adjusted proportional to an angle of the target bearing and the translational velocity is adjusted proportional to a distance to the nearest obstacle in front.

  19. Active objects programming for military autonomous mobile robots software prototyping

    NASA Astrophysics Data System (ADS)

    Cozien, Roger F.

    2001-09-01

    While designing mobile robots, we do think that the prototyping phase is really critical. Good and clever choices have to be made. Indeed, we may not easily upgrade such robots, and most of all, when the robot is on its own, any change in both the software and the physical body is going to be very difficult, if not impossible. Thus, a great effort has to be made when prototyping the robot. Furthermore, I think that the kind of programming is very important. If your programming model is not expressive enough, you may experience a great deal of difficulties to add all the features you want, in order to give your robot reactiveness and decision making autonomy. Moreover, designing, and prototyping the on-board software of a reactive robot brings other difficulties. A reactive robot does not include any matter of rapidity. A reactive system is a system able to respond to a huge pannel of situations of which it does not have the schedule. In other words, for instance, the robot does not know when a particular situation may occur, and overall, what it would be doing at this time, and what would be its internal state. This kind of robot must be able to take a decision and to act even if they do not have all the contextual information. To do so, we use a computer language named oRis featuring object and active object oriented programming, but also parallel and dynamic code, (the code can be changed during its own execution). This last point has been made possible because oRis is fully interpreted. However oRis may call fully compiled code, but also Prolog and Java code. An oRis program may be distributed on several computers using TCP/IP network connections. The main issue in this paper is to show how active objet oriented programming, as a modern extension of object oriented programming, may help us in designing autonomous mobile robots. Based on a fully parallel software programming, an active object code allows us to give many features to a robot, and to easily solve

  20. Active object programming for military autonomous mobile robot software prototyping

    NASA Astrophysics Data System (ADS)

    Cozien, Roger F.

    2001-10-01

    While designing mobile robots, we do think that the prototyping phase is really critical. Good and clever choices have to be made. Indeed, we may not easily upgrade such robots, and most of all, when the robot is on its own, any change in both the software and the physical body is going to be very difficult, if not impossible. Thus, a great effort has to be made when prototyping the robot. Furthermore, I think that the kind of programming is very important. If your programming model is not expressive enough, you may experience a great deal of difficulties to add all the features you want, in order to give your robot reactiveness and decision making autonomy. Moreover, designing, and prototyping the on-board software of a reactive robot brings other difficulties. A reactive robot does not include any matter of rapidity. A reactive system is a system able to respond to a huge panel of situations of which it does not have the schedule. In other words, for instance, the robot does not know when a particular situation may occur, and overall, what it would be doing at this time, and what would be its internal state. This kind of robot must be able to take a decision and to act even if they do not have all the contextual information. To do so, we use a computer language named oRis featuring object and active object oriented programming, but also parallel and dynamic code, (the code can be changed during its own execution). This last point has been made possible because oRis is fully interpreted. However oRis may call fully compiled code, but also Prolog and Java code. An oRis program may be distributed on several computers using TCP/IP network connections. The main issue in this paper is to show how active objet oriented programming, as a modern extension of object oriented programming, may help us in designing autonomous mobile robots. Based on a fully parallel software programming, an active object code allows us to give many features to a robot, and to easily solve

  1. Robots on the Roof

    NASA Video Gallery

    The Aerosol Robotic Network (AERONET) is one of the first places that scientists turn when volcanoes, wildfires, pollution plumes, dust storms and many other phenomena—both natural and manmade—...

  2. DOE Robotics Project

    SciTech Connect

    Not Available

    1991-01-01

    This document provide the bimonthly progress reports on the Department of Energy (DOE) Robotics Project by the University of Michigan. Reports are provided for the time periods of December 90/January 91 through June 91/July 91. (FI)

  3. Biological Soft Robotics.

    PubMed

    Feinberg, Adam W

    2015-01-01

    In nature, nanometer-scale molecular motors are used to generate force within cells for diverse processes from transcription and transport to muscle contraction. This adaptability and scalability across wide temporal, spatial, and force regimes have spurred the development of biological soft robotic systems that seek to mimic and extend these capabilities. This review describes how molecular motors are hierarchically organized into larger-scale structures in order to provide a basic understanding of how these systems work in nature and the complexity and functionality we hope to replicate in biological soft robotics. These span the subcellular scale to macroscale, and this article focuses on the integration of biological components with synthetic materials, coupled with bioinspired robotic design. Key examples include nanoscale molecular motor-powered actuators, microscale bacteria-controlled devices, and macroscale muscle-powered robots that grasp, walk, and swim. Finally, the current challenges and future opportunities in the field are addressed.

  4. Operator roles in robotics

    SciTech Connect

    Lyman, J.; Madni, A.M.

    1984-01-01

    The authors suggest that operator roles in robotics can be classified under the categories of monitor, manager, and maintainer. With increasingly sophisticated applications of machine intelligence, however, these roles will require explicit and continuing reassessment. 5 references.

  5. Microprocessors, Robotics, and Work.

    ERIC Educational Resources Information Center

    DeVore, Paul W.

    1982-01-01

    The author explores several recent technological developments which will have an impact on future technical education. These developments include the revolution in information services, robotics, job changes and eliminations, changing role of the worker, and quality of life. (CT)

  6. Rolling friction robot fingers

    NASA Technical Reports Server (NTRS)

    Vranish, John M. (Inventor)

    1992-01-01

    A low friction, object guidance, and gripping finger device for a robotic end effector on a robotic arm is disclosed, having a pair of robotic fingers each having a finger shaft slideably located on a gripper housing attached to the end effector. Each of the robotic fingers has a roller housing attached to the finger shaft. The roller housing has a ball bearing mounted centering roller located at the center, and a pair of ball bearing mounted clamping rollers located on either side of the centering roller. The object has a recess to engage the centering roller and a number of seating ramps for engaging the clamping rollers. The centering roller acts to position and hold the object symmetrically about the centering roller with respect to the X axis and the clamping rollers act to position and hold the object with respect to the Y and Z axis.

  7. Robotic aortic surgery.

    PubMed

    Duran, Cassidy; Kashef, Elika; El-Sayed, Hosam F; Bismuth, Jean

    2011-01-01

    Surgical robotics was first utilized to facilitate neurosurgical biopsies in 1985, and it has since found application in orthopedics, urology, gynecology, and cardiothoracic, general, and vascular surgery. Surgical assistance systems provide intelligent, versatile tools that augment the physician's ability to treat patients by eliminating hand tremor and enabling dexterous operation inside the patient's body. Surgical robotics systems have enabled surgeons to treat otherwise untreatable conditions while also reducing morbidity and error rates, shortening operative times, reducing radiation exposure, and improving overall workflow. These capabilities have begun to be realized in two important realms of aortic vascular surgery, namely, flexible robotics for exclusion of complex aortic aneurysms using branched endografts, and robot-assisted laparoscopic aortic surgery for occlusive and aneurysmal disease.

  8. Robotics in urologic oncology

    PubMed Central

    Jain, Saurabh; Gautam, Gagan

    2015-01-01

    Robotic surgery was initially developed to overcome problems faced during conventional laparoscopic surgeries and to perform telesurgery at distant locations. It has now established itself as the epitome of minimally invasive surgery (MIS). It is one of the most significant advances in MIS in recent years and is considered by many as a revolutionary technology, capable of influencing the future of surgery. After its introduction to urology, robotic surgery has redefined the management of urological malignancies. It promises to make difficult urological surgeries easier, safer and more acceptable to both the surgeon and the patient. Robotic surgery is slowly, but surely establishing itself in India. In this article, we provide an overview of the advantages, disadvantages, current status, and future applications of robotic surgery for urologic cancers in the context of the Indian scenario. PMID:25598598

  9. K-10 Robots

    NASA Video Gallery

    Robots, scientists, engineers and flight controllers from NASA's Ames Research Center at Moffett Field, Calif., and NASA's Johnson Space Center in Houston, gathered at NASA Ames to perform a series...

  10. Robots in operating theatres.

    PubMed Central

    Buckingham, R. A.; Buckingham, R. O.

    1995-01-01

    Robots designed for surgery have three main advantages over humans. They have greater three dimensional spatial accuracy, are more reliable, and can achieve much greater precision. Although few surgical robots are yet in clinical trials one or two have advanced to the stage of seeking approval from the UK's Medical Devices Agency and the US Federal Drug Administration. Safety is a key concern. A robotic device can be designed in an intrinsically safe way by restricting its range of movement to an area where it can do no damage. Furthermore, safety can be increased by making it passive, guided at all times by a surgeon. Nevertheless, some of the most promising developments may come from robots that are active (monitored rather than controlled by the surgeon) and not limited to intrinsically safe motion. Images Fig 1 Fig 3 Fig 4 PMID:8520340

  11. FIRST Robotics Kickoff

    NASA Technical Reports Server (NTRS)

    2007-01-01

    NASA engineers Scott Olive (left) and Bo Clarke answer questions during the 2007 FIRST (For Inspiration and Recognition of Science and Technology) Robotics Competition regional kickoff event held Saturday, Jan. 6, 2007, at StenniSphere, the visitor center at NASA Stennis Space Center near Bay St. Louis, Miss. The SSC employees and FIRST Robotics volunteer mentors are standing near a mock-up of the playing field for the FIRST Robotics' 2007 `Rack n' Roll' challenge. Roughly 300 students and adult volunteers - representing 29 high schools from four states - attended the kickoff to hear the rules of `Rack n' Roll.' The teams will spend the next six weeks building and programming robots from parts kits they received Saturday, then battle their creations at regional spring competitions in New Orleans, Houston, Atlanta and other cities around the nation. FIRST aims to inspire students in the pursuit of engineering and technology studies and careers.

  12. Robotics in Colorectal Surgery

    PubMed Central

    Weaver, Allison; Steele, Scott

    2016-01-01

    Over the past few decades, robotic surgery has developed from a futuristic dream to a real, widely used technology. Today, robotic platforms are used for a range of procedures and have added a new facet to the development and implementation of minimally invasive surgeries. The potential advantages are enormous, but the current progress is impeded by high costs and limited technology. However, recent advances in haptic feedback systems and single-port surgical techniques demonstrate a clear role for robotics and are likely to improve surgical outcomes. Although robotic surgeries have become the gold standard for a number of procedures, the research in colorectal surgery is not definitive and more work needs to be done to prove its safety and efficacy to both surgeons and patients. PMID:27746895

  13. The NAS parallel benchmarks

    NASA Technical Reports Server (NTRS)

    Bailey, David (Editor); Barton, John (Editor); Lasinski, Thomas (Editor); Simon, Horst (Editor)

    1993-01-01

    A new set of benchmarks was developed for the performance evaluation of highly parallel supercomputers. These benchmarks consist of a set of kernels, the 'Parallel Kernels,' and a simulated application benchmark. Together they mimic the computation and data movement characteristics of large scale computational fluid dynamics (CFD) applications. The principal distinguishing feature of these benchmarks is their 'pencil and paper' specification - all details of these benchmarks are specified only algorithmically. In this way many of the difficulties associated with conventional benchmarking approaches on highly parallel systems are avoided.

  14. Wheeled hopping robot

    DOEpatents

    Fischer, Gary J.

    2010-08-17

    The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

  15. Military Space Robotics

    DTIC Science & Technology

    1987-04-30

    space will need to be designed for service by autonomous robots. Objects in space will have to be hardened for protection against directed- energy ...weapons, kinetic- energy weapons, and natural radiation. Extraterrestrial m~itrials (ETM) will be preferable as a lower-cost alternative to earth-launched...RESOURCES IN ORBIT ROBOTS IN ORBIT ABILITY TO UTILIZE ETM TO CONSTRUCT ABILITY TO CONSTRUCT LARGE ORBITAL RESOURCES STRUCTURES IN ORBIT . ABILITY TO FORM

  16. Robotics and general surgery.

    PubMed

    Jacob, Brian P; Gagner, Michel

    2003-12-01

    Robotics are now being used in all surgical fields, including general surgery. By increasing intra-abdominal articulations while operating through small incisions, robotics are increasingly being used for a large number of visceral and solid organ operations, including those for the gallbladder, esophagus, stomach, intestines, colon, and rectum, as well as for the endocrine organs. Robotics and general surgery are blending for the first time in history and as a specialty field should continue to grow for many years to come. We continuously demand solutions to questions and limitations that are experienced in our daily work. Laparoscopy is laden with limitations such as fixed axis points at the trocar insertion sites, two-dimensional video monitors, limited dexterity at the instrument tips, lack of haptic sensation, and in some cases poor ergonomics. The creation of a surgical robot system with 3D visual capacity seems to deal with most of these limitations. Although some in the surgical community continue to test the feasibility of these surgical robots and to question the necessity of such an expensive venture, others are already postulating how to improve the next generation of telemanipulators, and in so doing are looking beyond today's horizon to find simpler solutions. As the robotic era enters the world of the general surgeon, more and more complex procedures will be able to be approached through small incisions. As technology catches up with our imaginations, robotic instruments (as opposed to robots) and 3D monitoring will become routine and continue to improve patient care by providing surgeons with the most precise, least traumatic ways of treating surgical disease.

  17. Dimensional synthesis of a 3-DOF parallel manipulator with full circle rotation

    NASA Astrophysics Data System (ADS)

    Ni, Yanbing; Wu, Nan; Zhong, Xueyong; Zhang, Biao

    2015-07-01

    Parallel robots are widely used in the academic and industrial fields. In spite of the numerous achievements in the design and dimensional synthesis of the low-mobility parallel robots, few research efforts are directed towards the asymmetric 3-DOF parallel robots whose end-effector can realize 2 translational and 1 rotational(2T1R) motion. In order to develop a manipulator with the capability of full circle rotation to enlarge the workspace, a new 2T1R parallel mechanism is proposed. The modeling approach and kinematic analysis of this proposed mechanism are investigated. Using the method of vector analysis, the inverse kinematic equations are established. This is followed by a vigorous proof that this mechanism attains an annular workspace through its circular rotation and 2 dimensional translations. Taking the first order perturbation of the kinematic equations, the error Jacobian matrix which represents the mapping relationship between the error sources of geometric parameters and the end-effector position errors is derived. With consideration of the constraint conditions of pressure angles and feasible workspace, the dimensional synthesis is conducted with a goal to minimize the global comprehensive performance index. The dimension parameters making the mechanism to have optimal error mapping and kinematic performance are obtained through the optimization algorithm. All these research achievements lay the foundation for the prototype building of such kind of parallel robots.

  18. Modularity in robotic systems

    NASA Technical Reports Server (NTRS)

    Tesar, Delbert; Butler, Michael S.

    1989-01-01

    Most robotic systems today are designed one at a time, at a high cost of time and money. This wasteful approach has been necessary because the industry has not established a foundation for the continued evolution of intelligent machines. The next generation of robots will have to be generic, versatile machines capable of absorbing new technology rapidly and economically. This approach is demonstrated in the success of the personal computer, which can be upgraded or expanded with new software and hardware at virtually every level. Modularity is perceived as a major opportunity to reduce the 6 to 7 year design cycle time now required for new robotic manipulators, greatly increasing the breadth and speed of diffusion of robotic systems in manufacturing. Modularity and its crucial role in the next generation of intelligent machines are the focus of interest. The main advantages that modularity provides are examined; types of modules needed to create a generic robot are discussed. Structural modules designed by the robotics group at the University of Texas at Austin are examined to demonstrate the advantages of modular design.

  19. Robot goniophotometry at PTB

    NASA Astrophysics Data System (ADS)

    Lindemann, M.; Maass, R.; Sauter, G.

    2015-04-01

    The total luminous flux of a light source is the complete integration of its spectral radiance distribution weighted with the photopic observer and taken over all parts of its surface and over the full solid angle of emittance. The spatial distributions are measured with various types of goniophotometers and the PTB robot goniophotometer is a new type with many unique features. It is built as an arrangement of three robots with arms of more than 6 m in length and with 7 degrees of freedom each. The extreme flexibility of the robots allows computer controlled tracks with variable radii and speeds up to 3 m and 1 m s-1, respectively. One robot aligns the light source and the two other robots move photometers and array spectrometers in their hemispheres simultaneously measuring planar illuminance and the related relative spectral distribution. The robot goniophotometer is optimized for the realisation of the luminous flux unit, the lumen and it is completely characterized in this report. The relevant properties and correction factors are explained, as well as the implementation of techniques for synchronisation and stabilisation of spatially resolved or integrated photometric and colorimetric quantities. Finally, all contributions are combined in the model of evaluation for the (total) luminous flux value and the measurement uncertainty associated with that value is evaluated in the presented uncertainty budget. The goniophotometric determination of the values for colorimetric quantities is explained for the total luminous flux and the spatially distributed radiant power.

  20. Robotic surgery in gynecology

    PubMed Central

    Sinha, Rooma; Sanjay, Madhumati; Rupa, B.; Kumari, Samita

    2015-01-01

    FDA approved Da Vinci Surgical System in 2005 for gynecological surgery. It has been rapidly adopted and it has already assumed an important position at various centers where this is available. It comprises of three components: A surgeon's console, a patient-side cart with four robotic arms and a high-definition three-dimensional (3D) vision system. In this review we have discussed various robotic-assisted laparoscopic benign gynecological procedures like myomectomy, hysterectomy, endometriosis, tubal anastomosis and sacrocolpopexy. A PubMed search was done and relevant published studies were reviewed. Surgeries that can have future applications are also mentioned. At present most studies do not give significant advantage over conventional laparoscopic surgery in benign gynecological disease. However robotics do give an edge in more complex surgeries. The conversion rate to open surgery is lesser with robotic assistance when compared to laparoscopy. For myomectomy surgery, Endo wrist movement of robotic instrument allows better and precise suturing than conventional straight stick laparoscopy. The robotic platform is a logical step forward to laparoscopy and if cost considerations are addressed may become popular among gynecological surgeons world over. PMID:25598600

  1. Application of robots in space.

    NASA Technical Reports Server (NTRS)

    Johnsen, E. G.

    1971-01-01

    Robots are defined as electromechanical systems (with local computers) receiving inputs from sensors, and in turn, controlling motors and effectors to do tasks requiring some measure of intelligence and permitting the whole system to interact with the real world. Robot systems for space applications are categorized into three general groups consisting of roving exploration robots, spacecraft robots, and planet development robots. The functions of systems in each category are defined in terms of intended applications, and requirements for operating and decision making are outlined. Further developments which must be achieved in robot technology are summarized.

  2. Robotic hand with modular extensions

    DOEpatents

    Salisbury, Curt Michael; Quigley, Morgan

    2015-01-20

    A robotic device is described herein. The robotic device includes a frame that comprises a plurality of receiving regions that are configured to receive a respective plurality of modular robotic extensions. The modular robotic extensions are removably attachable to the frame at the respective receiving regions by way of respective mechanical fuses. Each mechanical fuse is configured to trip when a respective modular robotic extension experiences a predefined load condition, such that the respective modular robotic extension detaches from the frame when the load condition is met.

  3. Parallel programming with PCN

    SciTech Connect

    Foster, I.; Tuecke, S.

    1991-12-01

    PCN is a system for developing and executing parallel programs. It comprises a high-level programming language, tools for developing and debugging programs in this language, and interfaces to Fortran and C that allow the reuse of existing code in multilingual parallel programs. Programs developed using PCN are portable across many different workstations, networks, and parallel computers. This document provides all the information required to develop parallel programs with the PCN programming system. In includes both tutorial and reference material. It also presents the basic concepts that underly PCN, particularly where these are likely to be unfamiliar to the reader, and provides pointers to other documentation on the PCN language, programming techniques, and tools. PCN is in the public domain. The latest version of both the software and this manual can be obtained by anonymous FTP from Argonne National Laboratory in the directory pub/pcn at info.mcs.anl.gov (c.f. Appendix A).

  4. Parallel programming with PCN

    SciTech Connect

    Foster, I.; Tuecke, S.

    1991-09-01

    PCN is a system for developing and executing parallel programs. It comprises a high-level programming language, a set of tools for developing and debugging programs in this language, and interfaces to Fortran and C that allow the reuse of existing code in multilingual parallel programs. Programs developed using PCN are portable across many different workstations, networks, and parallel computers. This document provides all the information required to develop parallel programs with the PCN programming system. It includes both tutorial and reference material. It also presents the basic concepts that underlie PCN, particularly where these are likely to be unfamiliar to the reader, and provides pointers to other documentation on the PCN language, programming techniques, and tools. PCN is in the public domain. The latest version of both the software and this manual can be obtained by anonymous FTP from Argonne National Laboratory at info.mcs.anl.gov.

  5. The Parallel Axiom

    ERIC Educational Resources Information Center

    Rogers, Pat

    1972-01-01

    Criteria for a reasonable axiomatic system are discussed. A discussion of the historical attempts to prove the independence of Euclids parallel postulate introduces non-Euclidean geometries. Poincare's model for a non-Euclidean geometry is defined and analyzed. (LS)

  6. Scalable parallel communications

    NASA Technical Reports Server (NTRS)

    Maly, K.; Khanna, S.; Overstreet, C. M.; Mukkamala, R.; Zubair, M.; Sekhar, Y. S.; Foudriat, E. C.

    1992-01-01

    Coarse-grain parallelism in networking (that is, the use of multiple protocol processors running replicated software sending over several physical channels) can be used to provide gigabit communications for a single application. Since parallel network performance is highly dependent on real issues such as hardware properties (e.g., memory speeds and cache hit rates), operating system overhead (e.g., interrupt handling), and protocol performance (e.g., effect of timeouts), we have performed detailed simulations studies of both a bus-based multiprocessor workstation node (based on the Sun Galaxy MP multiprocessor) and a distributed-memory parallel computer node (based on the Touchstone DELTA) to evaluate the behavior of coarse-grain parallelism. Our results indicate: (1) coarse-grain parallelism can deliver multiple 100 Mbps with currently available hardware platforms and existing networking protocols (such as Transmission Control Protocol/Internet Protocol (TCP/IP) and parallel Fiber Distributed Data Interface (FDDI) rings); (2) scale-up is near linear in n, the number of protocol processors, and channels (for small n and up to a few hundred Mbps); and (3) since these results are based on existing hardware without specialized devices (except perhaps for some simple modifications of the FDDI boards), this is a low cost solution to providing multiple 100 Mbps on current machines. In addition, from both the performance analysis and the properties of these architectures, we conclude: (1) multiple processors providing identical services and the use of space division multiplexing for the physical channels can provide better reliability than monolithic approaches (it also provides graceful degradation and low-cost load balancing); (2) coarse-grain parallelism supports running several transport protocols in parallel to provide different types of service (for example, one TCP handles small messages for many users, other TCP's running in parallel provide high bandwidth

  7. Programming environment for parallel-vision algorithms. Final technical report, February 1988-December 1989

    SciTech Connect

    Brown, C.

    1990-04-11

    This contract developed and disseminated papers, ideas, algorithms, analysis, software, applications, and implementations for parallel programming environments for computer vision and for vision applications. The work has been widely reported and highly influential. The most significant work centered on the Butterfly Parallel Processor, the MaxVideo pipelined parallel image processor, and the development of the real-time computer vision laboratory. For the Butterfly, the Psyche multi-model operating system was developed and the CONSUL autoparallelizing compiler was designed. Much basic and influential performance monitoring and debugging work was completed, resulting in working systems and novel algorithms. There was also significant research in systems and applications using other parallel architectures in the laboratory, such as the MaxVideo parallel pipelined image processor. The contract developed a heterogeneous parallel architecture involving pipelined and MIMD parallelism and integrated it with a robot head.

  8. Parallel image compression

    NASA Technical Reports Server (NTRS)

    Reif, John H.

    1987-01-01

    A parallel compression algorithm for the 16,384 processor MPP machine was developed. The serial version of the algorithm can be viewed as a combination of on-line dynamic lossless test compression techniques (which employ simple learning strategies) and vector quantization. These concepts are described. How these concepts are combined to form a new strategy for performing dynamic on-line lossy compression is discussed. Finally, the implementation of this algorithm in a massively parallel fashion on the MPP is discussed.

  9. Revisiting and parallelizing SHAKE

    NASA Astrophysics Data System (ADS)

    Weinbach, Yael; Elber, Ron

    2005-10-01

    An algorithm is presented for running SHAKE in parallel. SHAKE is a widely used approach to compute molecular dynamics trajectories with constraints. An essential step in SHAKE is the solution of a sparse linear problem of the type Ax = b, where x is a vector of unknowns. Conjugate gradient minimization (that can be done in parallel) replaces the widely used iteration process that is inherently serial. Numerical examples present good load balancing and are limited only by communication time.

  10. Cloud-Based Perception and Control of Sensor Nets and Robot Swarms

    DTIC Science & Technology

    2016-04-01

    particle filtering based SLAM algorithm; a deep learning based drone control algorithm; and a robot swarm algorithm for n-body collision avoidance. These...sensors, performance, cloud computing for DDDAS applications, robot swarm algorithm, parallel particle filtering, SLAM algorithm, deep learning , drone...performing the research, or credited with the content of the report. The form of entry is the last name, first name, middle initial, and

  11. Method for six-legged robot stepping on obstacles by indirect force estimation

    NASA Astrophysics Data System (ADS)

    Xu, Yilin; Gao, Feng; Pan, Yang; Chai, Xun

    2016-07-01

    Adaptive gaits for legged robots often requires force sensors installed on foot-tips, however impact, temperature or humidity can affect or even damage those sensors. Efforts have been made to realize indirect force estimation on the legged robots using leg structures based on planar mechanisms. Robot Octopus III is a six-legged robot using spatial parallel mechanism(UP-2UPS) legs. This paper proposed a novel method to realize indirect force estimation on walking robot based on a spatial parallel mechanism. The direct kinematics model and the inverse kinematics model are established. The force Jacobian matrix is derived based on the kinematics model. Thus, the indirect force estimation model is established. Then, the relation between the output torques of the three motors installed on one leg to the external force exerted on the foot tip is described. Furthermore, an adaptive tripod static gait is designed. The robot alters its leg trajectory to step on obstacles by using the proposed adaptive gait. Both the indirect force estimation model and the adaptive gait are implemented and optimized in a real time control system. An experiment is carried out to validate the indirect force estimation model. The adaptive gait is tested in another experiment. Experiment results show that the robot can successfully step on a 0.2 m-high obstacle. This paper proposes a novel method to overcome obstacles for the six-legged robot using spatial parallel mechanism legs and to avoid installing the electric force sensors in harsh environment of the robot's foot tips.

  12. An overview of artificial intelligence and robotics. Volume 2: Robotics

    NASA Technical Reports Server (NTRS)

    Gevarter, W. B.

    1982-01-01

    This report provides an overview of the rapidly changing field of robotics. The report incorporates definitions of the various types of robots, a summary of the basic concepts, utilized in each of the many technical areas, review of the state of the art and statistics of robot manufacture and usage. Particular attention is paid to the status of robot development, the organizations involved, their activities, and their funding.

  13. A history of robots: from science fiction to surgical robotics.

    PubMed

    Hockstein, N G; Gourin, C G; Faust, R A; Terris, D J

    2007-01-01

    Surgical robotics is an evolving field with great advances having been made over the last decade. The origin of robotics was in the science-fiction literature and from there industrial applications, and more recently commercially available, surgical robotic devices have been realized. In this review, we examine the field of robotics from its roots in literature to its development for clinical surgical use. Surgical mills and telerobotic devices are discussed, as are potential future developments.

  14. Development of a Pneumatic Robot for MRI-guided Transperineal Prostate Biopsy and Brachytherapy: New Approaches.

    PubMed

    Song, Sang-Eun; Cho, Nathan B; Fischer, Gregory; Hata, Nobuhito; Tempany, Clare; Fichtinger, Gabor; Iordachita, Iulian

    2010-07-15

    Magnetic Resonance Imaging (MRI) guided prostate biopsy and brachytherapy has been introduced in order to enhance the cancer detection and treatment. For the accurate needle positioning, a number of robotic assistants have been developed. However, problems exist due to the strong magnetic field and limited workspace. Pneumatically actuated robots have shown the minimum distraction in the environment but the confined workspace limits optimal robot design and thus controllability is often poor. To overcome the problem, a simple external damping mechanism using timing belts was sought and a 1-DOF mechanism test result indicated sufficient positioning accuracy. Based on the damping mechanism and modular system design approach, a new workspace-optimized 4-DOF parallel robot was developed for the MRI-guided prostate biopsy and brachytherapy. A preliminary evaluation of the robot was conducted using previously developed pneumatic controller and satisfying results were obtained.

  15. [Advanced Development for Space Robotics With Emphasis on Fault Tolerance Technology

    NASA Technical Reports Server (NTRS)

    Tesar, Delbert

    1997-01-01

    This report describes work developing fault tolerant redundant robotic architectures and adaptive control strategies for robotic manipulator systems which can dynamically accommodate drastic robot manipulator mechanism, sensor or control failures and maintain stable end-point trajectory control with minimum disturbance. Kinematic designs of redundant, modular, reconfigurable arms for fault tolerance were pursued at a fundamental level. The approach developed robotic testbeds to evaluate disturbance responses of fault tolerant concepts in robotic mechanisms and controllers. The development was implemented in various fault tolerant mechanism testbeds including duality in the joint servo motor modules, parallel and serial structural architectures, and dual arms. All have real-time adaptive controller technologies to react to mechanism or controller disturbances (failures) to perform real-time reconfiguration to continue the task operations. The developments fall into three main areas: hardware, software, and theoretical.

  16. Space-time modeling using environmental constraints in a mobile robot system

    NASA Technical Reports Server (NTRS)

    Slack, Marc G.

    1990-01-01

    Grid-based models of a robot's local environment have been used by many researchers building mobile robot control systems. The attraction of grid-based models is their clear parallel between the internal model and the external world. However, the discrete nature of such representations does not match well with the continuous nature of actions and usually serves to limit the abilities of the robot. This work describes a spatial modeling system that extracts information from a grid-based representation to form a symbolic representation of the robot's local environment. The approach makes a separation between the representation provided by the sensing system and the representation used by the action system. Separation allows asynchronous operation between sensing and action in a mobile robot, as well as the generation of a more continuous representation upon which to base actions.

  17. Development of a Pneumatic Robot for MRI-guided Transperineal Prostate Biopsy and Brachytherapy: New Approaches

    PubMed Central

    Song, Sang-Eun; Cho, Nathan B.; Fischer, Gregory; Hata, Nobuhito; Tempany, Clare; Fichtinger, Gabor; Iordachita, Iulian

    2011-01-01

    Magnetic Resonance Imaging (MRI) guided prostate biopsy and brachytherapy has been introduced in order to enhance the cancer detection and treatment. For the accurate needle positioning, a number of robotic assistants have been developed. However, problems exist due to the strong magnetic field and limited workspace. Pneumatically actuated robots have shown the minimum distraction in the environment but the confined workspace limits optimal robot design and thus controllability is often poor. To overcome the problem, a simple external damping mechanism using timing belts was sought and a 1-DOF mechanism test result indicated sufficient positioning accuracy. Based on the damping mechanism and modular system design approach, a new workspace-optimized 4-DOF parallel robot was developed for the MRI-guided prostate biopsy and brachytherapy. A preliminary evaluation of the robot was conducted using previously developed pneumatic controller and satisfying results were obtained. PMID:21399734

  18. Linguistic decision making for robot route learning.

    PubMed

    He, Hongmei; McGinnity, Thomas Martin; Coleman, Sonya; Gardiner, Bryan

    2014-01-01

    Machine learning enables the creation of a nonlinear mapping that describes robot-environment interaction, whereas computing linguistics make the interaction transparent. In this paper, we develop a novel application of a linguistic decision tree for a robot route learning problem by dynamically deciding the robot's behavior, which is decomposed into atomic actions in the context of a specified task. We examine the real-time performance of training and control of a linguistic decision tree, and explore the possibility of training a machine learning model in an adaptive system without dual CPUs for parallelization of training and control. A quantified evaluation approach is proposed, and a score is defined for the evaluation of a model's robustness regarding the quality of training data. Compared with the nonlinear system identification nonlinear auto-regressive moving average with eXogeneous inputs model structure with offline parameter estimation, the linguistic decision tree model with online linguistic ID3 learning achieves much better performance, robustness, and reliability.

  19. Deployer: A Robot-Deploying Robot

    DTIC Science & Technology

    2003-04-01

    6: Bandicoot 11 Figure 7: Deployer mast in a.) retracted, b.) extending, and c.) fully extended positions. 13 Figure 8: Wombat climbing stairs with...mast in a.) retracted, b.)extending, and c.) fully extended positions. 13 Deploy er Outfitting - Wombat The second Urban Robot, Wombat (Fig.8), was...equipped with a single, rear-mounted ISIS transceiver and a Swarm Radio to communicate with all of the Joeys. In addition, Wombat was equipped with

  20. Passive Optically Encoded Transponder (POET) An Acquisition And Alignment Target For Autonomous Robotics

    NASA Astrophysics Data System (ADS)

    White, G. K.

    1987-02-01

    Relative position information concerning an object that is to be acquired, attached to, or manipulated in some way by a robotic system is usually supplied by a known database or through vision information of some kind. Vision systems normally require some degree of intelligence to produce complete position information and therefore are relatively sophisticated, slow, or both. Simple "targets" require some amount of pattern recognition in autonomous operations and do not usually lend themselves to precision applications. This paper describes work on a discrete optical element prototype target which when interrogated by a video camera system, will provide noncontact relative position information about all 6 degrees-of-freedom (DOF). This information is available within the active field of view (FOV) of the transponder and could be processed by microprocessor-based, software algorithms with simple pattern recognition capabilities. The interrogation system (camera) is composed of a standard charge injection device (CID) array video camera, a controllable macrozoom lens, a liquid crystal shutter (LCS), and a point-source multispectral illuminator. This allows the transponder to be used where a standard video camera vision system is needed, or already implemented, and results in a relatively fast system (approximately 10 Hz). A passive optically encoded transponder (POET) implemented in a "stick-on" holographic optical element (HOE) is proposed as a next generation target, to supply relative position information in all 6 DOF for acquisition and precision alignment. In applications requiring maximum bandwidth and resolution, the fact that no "pattern recognition" is required in the proposed system results in the ability to interrogate the transponder in real time with a dedicated nonvision, interrogation system, resulting in a multiorder of magnitude increase in speed. The transponder (target) is configured to provide optimum information for the intended use. Being

  1. Decentralized sliding mode control of nonlinear flexible robots

    SciTech Connect

    Parker, G.G.; Robinett, R.D.; Segalman, D.J.; Inman, D.J.

    1994-06-01

    A technique using augmented sliding mode control for robust, real-time control of flexible multiple link robots is presented. For the purpose of controller design, the n-link, n-joint robot is subdivided into n single joint, single link subsystems. A sliding surface for each subsystem is specified so as to be globally, asymptotically stable. Each sliding surface contains rigid-body angular velocity, angular displacement and flexible body generalized velocities. The flexible body generalized accelerations are treated as disturbances during the controller design. This has the advantage of not requiring explicit equations for the flexible body motion. The result is n single input, single output controllers acting at the n joints of the robot, controlling rigid body angular displacement and providing damping for flexible body modes. Furthermore, the n controllers can be operated in parallel so that compute speed is independent of the number of links, affording real-time, robust, control.

  2. Applications of concurrent neuromorphic algorithms for autonomous robots

    NASA Technical Reports Server (NTRS)

    Barhen, J.; Dress, W. B.; Jorgensen, C. C.

    1988-01-01

    This article provides an overview of studies at the Oak Ridge National Laboratory (ORNL) of neural networks running on parallel machines applied to the problems of autonomous robotics. The first section provides the motivation for our work in autonomous robotics and introduces the computational hardware in use. Section 2 presents two theorems concerning the storage capacity and stability of neural networks. Section 3 presents a novel load-balancing algorithm implemented with a neural network. Section 4 introduces the robotics test bed now in place. Section 5 concerns navigation issues in the test-bed system. Finally, Section 6 presents a frequency-coded network model and shows how Darwinian techniques are applied to issues of parameter optimization and on-line design.

  3. Socially intelligent robots: dimensions of human-robot interaction.

    PubMed

    Dautenhahn, Kerstin

    2007-04-29

    Social intelligence in robots has a quite recent history in artificial intelligence and robotics. However, it has become increasingly apparent that social and interactive skills are necessary requirements in many application areas and contexts where robots need to interact and collaborate with other robots or humans. Research on human-robot interaction (HRI) poses many challenges regarding the nature of interactivity and 'social behaviour' in robot and humans. The first part of this paper addresses dimensions of HRI, discussing requirements on social skills for robots and introducing the conceptual space of HRI studies. In order to illustrate these concepts, two examples of HRI research are presented. First, research is surveyed which investigates the development of a cognitive robot companion. The aim of this work is to develop social rules for robot behaviour (a 'robotiquette') that is comfortable and acceptable to humans. Second, robots are discussed as possible educational or therapeutic toys for children with autism. The concept of interactive emergence in human-child interactions is highlighted. Different types of play among children are discussed in the light of their potential investigation in human-robot experiments. The paper concludes by examining different paradigms regarding 'social relationships' of robots and people interacting with them.

  4. Supersmart Robots: The Next Generation of Robots Has Evolutionary Capabilities

    ERIC Educational Resources Information Center

    Simkins, Michael

    2008-01-01

    Robots that can learn new behaviors. Robots that can reproduce themselves. Science fiction? Not anymore. Roboticists at Cornell's Computational Synthesis Lab have developed just such engineered creatures that offer interesting implications for education. The team, headed by Hod Lipson, was intrigued by the question, "How can you get robots to be…

  5. Robots for Astrobiology!

    NASA Technical Reports Server (NTRS)

    Boston, Penelope J.

    2016-01-01

    The search for life and its study is known as astrobiology. Conducting that search on other planets in our Solar System is a major goal of NASA and other space agencies, and a driving passion of the community of scientists and engineers around the world. We practice for that search in many ways, from exploring and studying extreme environments on Earth, to developing robots to go to other planets and help us look for any possible life that may be there or may have been there in the past. The unique challenges of space exploration make collaborations between robots and humans essential. The products of those collaborations will be novel and driven by the features of wholly new environments. For space and planetary environments that are intolerable for humans or where humans present an unacceptable risk to possible biologically sensitive sites, autonomous robots or telepresence offer excellent choices. The search for life signs on Mars fits within this category, especially in advance of human landed missions there, but also as assistants and tools once humans reach the Red Planet. For planetary destinations where we do not envision humans ever going in person, like bitterly cold icy moons, or ocean worlds with thick ice roofs that essentially make them planetary-sized ice caves, we will rely on robots alone to visit those environments for us and enable us to explore and understand any life that we may find there. Current generation robots are not quite ready for some of the tasks that we need them to do, so there are many opportunities for roboticists of the future to advance novel types of mobility, autonomy, and bio-inspired robotic designs to help us accomplish our astrobiological goals. We see an exciting partnership between robotics and astrobiology continually strengthening as we jointly pursue the quest to find extraterrestrial life.

  6. ISS Update: Robotic Refueling Mission

    NASA Video Gallery

    NASA Public Affairs Officer Dan Huot interviews Alex Janas, robotics operator from the Goddard Space Flight Center, about the Robotic Refueling Mission that has been taking place on the space stati...

  7. Artificial intelligence: Robots with instincts

    NASA Astrophysics Data System (ADS)

    Adami, Christoph

    2015-05-01

    An evolutionary algorithm has been developed that allows robots to adapt to unforeseen change. The robots learn behaviours quickly and instinctively by mining the memory of their past achievements. See Letter p.503

  8. Industrial Robots on the Line.

    ERIC Educational Resources Information Center

    Ayres, Robert; Miller, Steve

    1982-01-01

    Explores the history of robotics and its effects upon the manufacturing industry. Topics include robots' capabilities and limitations, the factory of the future, displacement of the workforce, and implications for management and labor. (SK)

  9. Basic Operational Robotics Instructional System

    NASA Technical Reports Server (NTRS)

    Todd, Brian Keith; Fischer, James; Falgout, Jane; Schweers, John

    2013-01-01

    The Basic Operational Robotics Instructional System (BORIS) is a six-degree-of-freedom rotational robotic manipulator system simulation used for training of fundamental robotics concepts, with in-line shoulder, offset elbow, and offset wrist. BORIS is used to provide generic robotics training to aerospace professionals including flight crews, flight controllers, and robotics instructors. It uses forward kinematic and inverse kinematic algorithms to simulate joint and end-effector motion, combined with a multibody dynamics model, moving-object contact model, and X-Windows based graphical user interfaces, coordinated in the Trick Simulation modeling environment. The motivation for development of BORIS was the need for a generic system for basic robotics training. Before BORIS, introductory robotics training was done with either the SRMS (Shuttle Remote Manipulator System) or SSRMS (Space Station Remote Manipulator System) simulations. The unique construction of each of these systems required some specialized training that distracted students from the ideas and goals of the basic robotics instruction.

  10. Robots Aboard International Space Station

    NASA Video Gallery

    Ames Research Center, MIT and Johnson Space Center have two new robotics projects aboard the International Space Station (ISS). Robonaut 2, a two-armed humanoid robot with astronaut-like dexterity,...

  11. Pediatric robotic urologic surgery-2014.

    PubMed

    Kearns, James T; Gundeti, Mohan S

    2014-07-01

    We seek to provide a background of the current state of pediatric urologic surgery including a brief history, procedural outcomes, cost considerations, future directions, and the state of robotic surgery in India. Pediatric robotic urology has been shown to be safe and effective in cases ranging from pyeloplasty to bladder augmentation with continent urinary diversion. Complication rates are in line with other methods of performing the same procedures. The cost of robotic surgery continues to decrease, but setting up pediatric robotic urology programs can be costly in terms of both monetary investment and the training of robotic surgeons. The future directions of robot surgery include instrument and system refinements, augmented reality and haptics, and telesurgery. Given the large number of children in India, there is huge potential for growth of pediatric robotic urology in India. Pediatric robotic urologic surgery has been established as safe and effective, and it will be an important tool in the future of pediatric urologic surgery worldwide.

  12. Application of autonomous robotics to surveillance of waste storage containers for radioactive surface contamination

    SciTech Connect

    Sweeney, F.J.; Beckerman, M.; Butler, P.L.; Jones, J.P.; Reister, D.B.

    1991-01-01

    This paper describes a proof-of-principal demonstration performed with the HERMIES-III mobile robot to automate the inspection of waste storage drums for radioactive surface contamination and thereby reduce the human burden of operating a robot and worker exposure to potentially hazardous environments. Software and hardware for the demonstration were developed by a team consisting of Oak Ridge National Laboratory, and the Universities of Florida, Michigan, Tennessee, and Texas. Robot navigation, machine vision, manipulator control, parallel processing and human-machine interface techniques developed by the team were demonstrated utilizing advanced computer architectures. The demonstration consists of over 100,000 lines of computer code executing on nine computers.

  13. Application of autonomous robotics to surveillance of waste storage containers for radioactive surface contamination

    SciTech Connect

    Sweeney, F.J.; Beckerman, M.; Butler, P.L.; Jones, J.P.; Reister, D.B.

    1991-12-31

    This paper describes a proof-of-principal demonstration performed with the HERMIES-III mobile robot to automate the inspection of waste storage drums for radioactive surface contamination and thereby reduce the human burden of operating a robot and worker exposure to potentially hazardous environments. Software and hardware for the demonstration were developed by a team consisting of Oak Ridge National Laboratory, and the Universities of Florida, Michigan, Tennessee, and Texas. Robot navigation, machine vision, manipulator control, parallel processing and human-machine interface techniques developed by the team were demonstrated utilizing advanced computer architectures. The demonstration consists of over 100,000 lines of computer code executing on nine computers.

  14. Remote Education Based on Robot Edutainment

    NASA Astrophysics Data System (ADS)

    Yorita, Akihiro; Hashimoto, Takuya; Kobayashi, Hiroshi; Kubota, Naoyuki

    This paper discusses the role of robots in remote education. There are three different aims of robot edutainment, i.e., Learning on Robots, Learning through Robots, and Learning with Robots. The last is to apply human-friendly robots instead of personal computers for computer-assisted instruction. Especially, natural communication capability is required to educational robots in the learning with robots. In this paper, we apply human-friendly robots to remote education and discuss the requirements and specifications of robots for the remote education.

  15. Aerial Explorers and Robotic Ecosystems

    NASA Technical Reports Server (NTRS)

    Young, Larry A.; Pisanich, Greg

    2004-01-01

    A unique bio-inspired approach to autonomous aerial vehicle, a.k.a. aerial explorer technology is discussed. The work is focused on defining and studying aerial explorer mission concepts, both as an individual robotic system and as a member of a small robotic "ecosystem." Members of this robotic ecosystem include the aerial explorer, air-deployed sensors and robotic symbiotes, and other assets such as rovers, landers, and orbiters.

  16. Cooperative Autonomous Robots for Reconnaissance

    DTIC Science & Technology

    2009-03-06

    REPORT Cooperative Autonomous Robots for Reconnaissance 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: Collaborating mobile robots equipped with WiFi ...Cooperative Autonomous Robots for Reconnaissance Report Title ABSTRACT Collaborating mobile robots equipped with WiFi transceivers are configured as a mobile...equipped with WiFi transceivers are configured as a mobile ad-hoc network. Algorithms are developed to take advantage of the distributed processing

  17. Higher Order Languages for Robots,

    DTIC Science & Technology

    1986-10-01

    and procedures for math, I/O, character manipula- 4; tion, robot motion , and line tracking give pre-defined methods for real world control, which...and Shin (5) describe five levels of robot programming: task- " oriented, structured programming, primitive motion , point-to-point, and micro...spray painting robot the programmer (usually a shop floor operator) leads the robot through all of the motions for locating, moving, and orienting the

  18. Teen Sized Humanoid Robot: Archie

    NASA Astrophysics Data System (ADS)

    Baltes, Jacky; Byagowi, Ahmad; Anderson, John; Kopacek, Peter

    This paper describes our first teen sized humanoid robot Archie. This robot has been developed in conjunction with Prof. Kopacek’s lab from the Technical University of Vienna. Archie uses brushless motors and harmonic gears with a novel approach to position encoding. Based on our previous experience with small humanoid robots, we developed software to create, store, and play back motions as well as control methods which automatically balance the robot using feedback from an internal measurement unit (IMU).

  19. Investigating the Implementation of Robotics.

    DTIC Science & Technology

    1984-02-01

    igating the Implementation of Robotics j Linda Argote and Paul S. Goodman I CML-RI-TRS84-9I Investigating the Implementation of Robotics #Linda...Argote and Paul S. Goodman CMU-RI-TR-84-9 The Robotics Institute Carnegie-Mellon University Pittsburgh, Pennsylvania 15213 Fecbruary 1984 JUN~jg 4...Copyright ®1984 Carnegie-Mellon UniversityA UA Support for this research was provided by the Graduate School of Industrial Administration, thc Robotics

  20. US Army TARDEC: Robotics Overview

    DTIC Science & Technology

    2010-03-25

    unclassified US ARMY TARDEC Robotics Overview Bernard Theisen, Joint Center for Robotics 25 March 2010 Reference herein to any specific commercial...4. TITLE AND SUBTITLE US ARMY TARDEC Robotics Overview 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Bernard... Robotics Industry Partnerships Academia PartnershipsGovernment Partnerships TRADOC Community Outreach • S&T Support to the RS-JPO • Develops and Fosters

  1. ICAM Robotics Application Guide (RAG)

    DTIC Science & Technology

    1980-04-01

    ROBOTICS APPLICATION MB GENERAL DYNAMICS CORPORATION FORT WORTH DIVISION FORT WORTH, TEXAS 76101 APRIL 1980 TECHNICAL REPORT AFWAL-TR-80-4042...DOCUMENTATION PAGE AyvJAijfTR-so-AOA^vnntnuFri ’ AT)(-ß05O CTXZ/, l. GOVT ACCESSION NO Ull’i ICAM Robotics Application Guide (RAG) m . vlJ L...Effector Flexible Automation Industrial Robot Manipulator Robotics Work Volume 20. ABSTRACT (Continue on reverse erde II necessary end

  2. Parallel architectures for vision

    SciTech Connect

    Maresca, M. ); Lavin, M.A. ); Li, H. )

    1988-08-01

    Vision computing involves the execution of a large number of operations on large sets of structured data. Sequential computers cannot achieve the speed required by most of the current applications and therefore parallel architectural solutions have to be explored. In this paper the authors examine the options that drive the design of a vision oriented computer, starting with the analysis of the basic vision computation and communication requirements. They briefly review the classical taxonomy for parallel computers, based on the multiplicity of the instruction and data stream, and apply a recently proposed criterion, the degree of autonomy of each processor, to further classify fine-grain SIMD massively parallel computers. They identify three types of processor autonomy, namely operation autonomy, addressing autonomy, and connection autonomy. For each type they give the basic definitions and show some examples. They focus on the concept of connection autonomy, which they believe is a key point in the development of massively parallel architectures for vision. They show two examples of parallel computers featuring different types of connection autonomy - the Connection Machine and the Polymorphic-Torus - and compare their cost and benefit.

  3. Sublattice parallel replica dynamics

    NASA Astrophysics Data System (ADS)

    Martínez, Enrique; Uberuaga, Blas P.; Voter, Arthur F.

    2014-06-01

    Exascale computing presents a challenge for the scientific community as new algorithms must be developed to take full advantage of the new computing paradigm. Atomistic simulation methods that offer full fidelity to the underlying potential, i.e., molecular dynamics (MD) and parallel replica dynamics, fail to use the whole machine speedup, leaving a region in time and sample size space that is unattainable with current algorithms. In this paper, we present an extension of the parallel replica dynamics algorithm [A. F. Voter, Phys. Rev. B 57, R13985 (1998), 10.1103/PhysRevB.57.R13985] by combining it with the synchronous sublattice approach of Shim and Amar [Y. Shim and J. G. Amar, Phys. Rev. B 71, 125432 (2005), 10.1103/PhysRevB.71.125432], thereby exploiting event locality to improve the algorithm scalability. This algorithm is based on a domain decomposition in which events happen independently in different regions in the sample. We develop an analytical expression for the speedup given by this sublattice parallel replica dynamics algorithm and compare it with parallel MD and traditional parallel replica dynamics. We demonstrate how this algorithm, which introduces a slight additional approximation of event locality, enables the study of physical systems unreachable with traditional methodologies and promises to better utilize the resources of current high performance and future exascale computers.

  4. Quantum robots plus environments.

    SciTech Connect

    Benioff, P.

    1998-07-23

    A quantum robot is a mobile quantum system, including an on board quantum computer and needed ancillary systems, that interacts with an environment of quantum systems. Quantum robots carry out tasks whose goals include making specified changes in the state of the environment or carrying out measurements on the environment. The environments considered so far, oracles, data bases, and quantum registers, are seen to be special cases of environments considered here. It is also seen that a quantum robot should include a quantum computer and cannot be simply a multistate head. A model of quantum robots and their interactions is discussed in which each task, as a sequence of alternating computation and action phases,is described by a unitary single time step operator T {approx} T{sub a} + T{sub c} (discrete space and time are assumed). The overall system dynamics is described as a sum over paths of completed computation (T{sub c}) and action (T{sub a}) phases. A simple example of a task, measuring the distance between the quantum robot and a particle on a 1D lattice with quantum phase path dispersion present, is analyzed. A decision diagram for the task is presented and analyzed.

  5. Robotics, Ethics, and Nanotechnology

    NASA Astrophysics Data System (ADS)

    Ganascia, Jean-Gabriel

    It may seem out of character to find a chapter on robotics in a book about nanotechnology, and even more so a chapter on the application of ethics to robots. Indeed, as we shall see, the questions look quite different in these two fields, i.e., in robotics and nanoscience. In short, in the case of robots, we are dealing with artificial beings endowed with higher cognitive faculties, such as language, reasoning, action, and perception, whereas in the case of nano-objects, we are talking about invisible macromolecules which act, move, and duplicate unseen to us. In one case, we find ourselves confronted by a possibly evil double of ourselves, and in the other, a creeping and intangible nebula assails us from all sides. In one case, we are faced with an alter ego which, although unknown, is clearly perceptible, while in the other, an unspeakable ooze, the notorious grey goo, whose properties are both mysterious and sinister, enters and immerses us. This leads to a shift in the ethical problem situation: the notion of responsibility can no longer be worded in the same terms because, despite its otherness, the robot can always be located somewhere, while in the case of nanotechnologies, myriad nanometric objects permeate everywhere, disseminating uncontrollably.

  6. Robotic microsurgery optimization.

    PubMed

    Brahmbhatt, Jamin V; Gudeloglu, Ahmet; Liverneaux, Philippe; Parekattil, Sijo J

    2014-05-01

    The increased application of the da Vinci robotic platform (Intuitive Surgical Inc.) for microsurgery has led to the development of new adjunctive surgical instrumentation. In microsurgery, the robotic platform can provide high definition 12×-15× digital magnification, broader range of motion, fine instrument handling with decreased tremor, reduced surgeon fatigue, and improved surgical productivity. This paper presents novel adjunctive tools that provide enhanced optical magnification, micro-Doppler sensing of vessels down to a 1-mm size, vein mapping capabilities, hydro-dissection, micro-ablation technology (with minimal thermal spread-CO2 laser technology), and confocal microscopy to provide imaging at a cellular level. Microsurgical outcomes from the use of these tools in the management of patients with infertility and chronic groin and testicular pain are reviewed. All these instruments have been adapted for the robotic console and enhance the robot-assisted microsurgery experience. As the popularity of robot-assisted microsurgery grows, so will its breadth of instrumentation.

  7. Biologically inspired intelligent robots

    NASA Astrophysics Data System (ADS)

    Bar-Cohen, Yoseph; Breazeal, Cynthia

    2003-07-01

    Humans throughout history have always sought to mimic the appearance, mobility, functionality, intelligent operation, and thinking process of biological creatures. This field of biologically inspired technology, having the moniker biomimetics, has evolved from making static copies of human and animals in the form of statues to the emergence of robots that operate with realistic behavior. Imagine a person walking towards you where suddenly you notice something weird about him--he is not real but rather he is a robot. Your reaction would probably be "I can't believe it but this robot looks very real" just as you would react to an artificial flower that is a good imitation. You may even proceed and touch the robot to check if your assessment is correct but, as oppose to the flower case, the robot may be programmed to respond physical and verbally. This science fiction scenario could become a reality as the current trend continues in developing biologically inspired technologies. Technology evolution led to such fields as artificial muscles, artificial intelligence, and artificial vision as well as biomimetic capabilities in materials science, mechanics, electronics, computing science, information technology and many others. This paper will review the state of the art and challenges to biologically-inspired technologies and the role that EAP is expected to play as the technology evolves.

  8. Engineering robust intelligent robots

    NASA Astrophysics Data System (ADS)

    Hall, E. L.; Ali, S. M. Alhaj; Ghaffari, M.; Liao, X.; Cao, M.

    2010-01-01

    The purpose of this paper is to discuss the challenge of engineering robust intelligent robots. Robust intelligent robots may be considered as ones that not only work in one environment but rather in all types of situations and conditions. Our past work has described sensors for intelligent robots that permit adaptation to changes in the environment. We have also described the combination of these sensors with a "creative controller" that permits adaptive critic, neural network learning, and a dynamic database that permits task selection and criteria adjustment. However, the emphasis of this paper is on engineering solutions which are designed for robust operations and worst case situations such as day night cameras or rain and snow solutions. This ideal model may be compared to various approaches that have been implemented on "production vehicles and equipment" using Ethernet, CAN Bus and JAUS architectures and to modern, embedded, mobile computing architectures. Many prototype intelligent robots have been developed and demonstrated in terms of scientific feasibility but few have reached the stage of a robust engineering solution. Continual innovation and improvement are still required. The significance of this comparison is that it provides some insights that may be useful in designing future robots for various manufacturing, medical, and defense applications where robust and reliable performance is essential.

  9. Surgery with cooperative robots.

    PubMed

    Lehman, Amy C; Berg, Kyle A; Dumpert, Jason; Wood, Nathan A; Visty, Abigail Q; Rentschler, Mark E; Platt, Stephen R; Farritor, Shane M; Oleynikov, Dmitry

    2008-03-01

    Advances in endoscopic techniques for abdominal procedures continue to reduce the invasiveness of surgery. Gaining access to the peritoneal cavity through small incisions prompted the first significant shift in general surgery. The complete elimination of external incisions through natural orifice access is potentially the next step in reducing patient trauma. While minimally invasive techniques offer significant patient advantages, the procedures are surgically challenging. Robotic surgical systems are being developed that address the visualization and manipulation limitations, but many of these systems remain constrained by the entry incisions. Alternatively, miniature in vivo robots are being developed that are completely inserted into the peritoneal cavity for laparoscopic and natural orifice procedures. These robots can provide vision and task assistance without the constraints of the entry incision, and can reduce the number of incisions required for laparoscopic procedures. In this study, a series of minimally invasive animal-model surgeries were performed using multiple miniature in vivo robots in cooperation with existing laparoscopy and endoscopy tools as well as the da Vinci Surgical System. These procedures demonstrate that miniature in vivo robots can address the visualization constraints of minimally invasive surgery by providing video feedback and task assistance from arbitrary orientations within the peritoneal cavity.

  10. The problem with multiple robots

    NASA Technical Reports Server (NTRS)

    Huber, Marcus J.; Kenny, Patrick G.

    1994-01-01

    The issues that can arise in research associated with multiple, robotic agents are discussed. Two particular multi-robot projects are presented as examples. This paper was written in the hope that it might ease the transition from single to multiple robot research.

  11. Robotics and Intelligent Systems Program

    SciTech Connect

    Not Available

    1987-06-01

    This report gives brief descriptions of the projects associated with the Robotics and Intelligent Systems Program (RISP). Projects included in the report are (1) Remote Operations Demonstration Facility; (2) M-2 Servomanipulator; (3) The Advanced Servomanipulator; (4) Hostile Environment Robotic Machine Intelligence Experiment Series robots); and (5) Telerobotic Concepts. These devices have application in nuclear industry and space environments. (JDH)

  12. Heterogeneous Multi-Robot Cooperation

    DTIC Science & Technology

    1994-02-01

    the objects the robots manipulate are hazardous waste. I have not actually applied the robots to reA toxic waste spills, since they are simply small...1993] Bruce Randall Donald, James Jennings, and Daniela Rus. To- wards a theory of information invariants for cooperating autonomous mobile robots

  13. Adaptive Language Games with Robots

    NASA Astrophysics Data System (ADS)

    Steels, Luc

    2010-11-01

    This paper surveys recent research into language evolution using computer simulations and robotic experiments. This field has made tremendous progress in the past decade going from simple simulations of lexicon formation with animallike cybernetic robots to sophisticated grammatical experiments with humanoid robots.

  14. Humans and Robots. Educational Brief.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Washington, DC.

    This brief discusses human movement and robotic human movement simulators. The activity for students in grades 5-12 provides a history of robotic movement and includes making an End Effector for the robotic arms used on the Space Shuttle and the International Space Station (ISS). (MVL)

  15. KC-135 materials handling robotics

    NASA Technical Reports Server (NTRS)

    Workman, Gary L.

    1991-01-01

    Robot dynamics and control will become an important issue for implementing productive platforms in space. Robotic operations will become necessary for man-tended stations and for efficient performance of routine operations in a manned platform. The current constraints on the use of robotic devices in a microgravity environment appears to be due to an anticipated increase in acceleration levels due to manipulator motion and for safety concerns. The objective of this study will be to provide baseline data to meet that need. Most texts and papers dealing with the kinematics and dynamics of robots assume that the manipulator is composed of joints separated by rigid links. However, in recent years several groups have begun to study the dynamics of flexible manipulators, primarily for applying robots in space and for improving the efficiency and precision of robotic systems. Robotic systems which are being planned for implementation in space have a number of constraints to overcome. Additional concepts which have to be worked out in any robotic implementation for a space platform include teleoperation and degree of autonomous control. Some significant results in developing a robotic workcell for performing robotics research on the KC-135 aircraft in preperation for space-based robotics applications in the future were generated. In addition, it was shown that TREETOPS can be used to simulate the dynamics of robot manipulators for both space and ground-based applications.

  16. Robotic Design for the Classroom

    NASA Technical Reports Server (NTRS)

    Culbert, Chris; Burns, Kaylynn

    2001-01-01

    This slide presentation reviews the use of robotic design to interest students in science and engineering. It describes one program, BEST, and resources that area available to design and create a robot. BEST is a competition for sixth and seventh graders that is designed to engage gifted and talented students. A couple of scenarios involving the use of a robot are outlined.

  17. Robot Technology: Implications for Education.

    ERIC Educational Resources Information Center

    Post, Paul E.; And Others

    1988-01-01

    Provides an introduction to robotic technology, and describes current robot models. Three ways of using robots in education are discussed--as exemplars of other processes, as objects of instruction, and as prosthetic aids--and selection criteria are outlined. (17 references) (CLB)

  18. Future perspectives in robotic surgery.

    PubMed

    Wedmid, Alexei; Llukani, Elton; Lee, David I

    2011-09-01

    Robotics of the current day have advanced significantly from early computer-aided design/manufacturing systems to modern master-slave robotic systems that replicate the surgeon's exact movements onto robotic instruments in the patient. • Globally >300,000 robotic procedures were completed in 2010, including ≈98,000 robot-assisted radical prostatectomies. • Broadening applications of robotics for urological procedures are being investigated in both adult and paediatric urology. • The use of the current robotic system continues to be further refined. Increasing experience has optimized port placement reducing arm collisions to allow for more expedient surgery. Improved three-dimensional camera magnification provides improved intraoperative identification of structures. • Robotics has probably improved the learning curve of laparoscopic surgery while still maintaining its patient recovery advantages and outcomes. • The future of robotic surgery will take this current platform forward by improving haptic (touch) feedback, improving vision beyond even the magnified eye, improving robot accessibility with a reduction of entry ports and miniaturizing the slave robot. • Here, we focus on the possible advancements that may change the future landscape of robotic surgery.

  19. Parallel optical sampler

    DOEpatents

    Tauke-Pedretti, Anna; Skogen, Erik J; Vawter, Gregory A

    2014-05-20

    An optical sampler includes a first and second 1.times.n optical beam splitters splitting an input optical sampling signal and an optical analog input signal into n parallel channels, respectively, a plurality of optical delay elements providing n parallel delayed input optical sampling signals, n photodiodes converting the n parallel optical analog input signals into n respective electrical output signals, and n optical modulators modulating the input optical sampling signal or the optical analog input signal by the respective electrical output signals, and providing n successive optical samples of the optical analog input signal. A plurality of output photodiodes and eADCs convert the n successive optical samples to n successive digital samples. The optical modulator may be a photodiode interconnected Mach-Zehnder Modulator. A method of sampling the optical analog input signal is disclosed.

  20. CRUNCH_PARALLEL

    SciTech Connect

    Shumaker, Dana E.; Steefel, Carl I.

    2016-06-21

    The code CRUNCH_PARALLEL is a parallel version of the CRUNCH code. CRUNCH code version 2.0 was previously released by LLNL, (UCRL-CODE-200063). Crunch is a general purpose reactive transport code developed by Carl Steefel and Yabusake (Steefel Yabsaki 1996). The code handles non-isothermal transport and reaction in one, two, and three dimensions. The reaction algorithm is generic in form, handling an arbitrary number of aqueous and surface complexation as well as mineral dissolution/precipitation. A standardized database is used containing thermodynamic and kinetic data. The code includes advective, dispersive, and diffusive transport.