Science.gov

Sample records for 6m hydrochloric acid

  1. Hydrochloric acid poisoning

    MedlinePlus

    Hydrochloric acid is a clear, poisonous liquid. It is highly corrosive, which means it immediately causes severe damage, such ... poisoning due to swallowing or breathing in hydrochloric acid. This article is for information only. Do NOT ...

  2. 21 CFR 582.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Hydrochloric acid. 582.1057 Section 582.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  3. 21 CFR 582.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Hydrochloric acid. 582.1057 Section 582.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  4. 21 CFR 582.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Hydrochloric acid. 582.1057 Section 582.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  5. 21 CFR 582.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Hydrochloric acid. 582.1057 Section 582.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  6. 21 CFR 182.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Hydrochloric acid. 182.1057 Section 182.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  7. 21 CFR 182.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Hydrochloric acid. 182.1057 Section 182.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  8. 21 CFR 582.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Hydrochloric acid. 582.1057 Section 582.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  9. 21 CFR 182.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Hydrochloric acid. 182.1057 Section 182.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  10. 21 CFR 182.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Hydrochloric acid. 182.1057 Section 182.1057 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations,...

  11. 21 CFR 182.1057 - Hydrochloric acid.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Hydrochloric acid. 182.1057 Section 182.1057 Food... GENERALLY RECOGNIZED AS SAFE Multiple Purpose GRAS Food Substances § 182.1057 Hydrochloric acid. (a) Product. Hydrochloric acid. (b) (c) Limitations, restrictions, or explanation. This substance is generally recognized...

  12. ARDS following inhalation of hydrochloric acid.

    PubMed

    Bansal, D P; Ambegaonkar, Rahul; Radhika, P; Sharma, Manish

    2011-02-01

    The clinical spectrum of Inhalation injury can range from mild cough to a devastating ARDS. We herewith present a patient who is a goldsmith by occupation and his work consists of dissolving gold in Hydrochloric acid. He had accidentally inhaled fumes of Hydrochloric acid and presented with cough and breathlessness, later on required mechanical ventilation for ARDS and improved. This highlights the importance of not to neglect mild symptoms like cough and dyspnea in such a scenario which may have some hidden catastrophe.

  13. Venus clouds - A dirty hydrochloric acid model.

    NASA Technical Reports Server (NTRS)

    Hapke, B.

    1972-01-01

    The spectral and polarization data for Venus are consistent with micrometer-sized aerosol cloud particles of hydrochloric acid with soluble and insoluble iron compounds, whose source could be volcanic or crustal dust. The yellow color of the clouds could be due to absorption bands in the near UV involving ferric iron and chlorine complexes. It is pointed out that the UV features could arise from variations in the concentrations of iron and hydrochloric acid in the cloud particles.

  14. 46 CFR 153.557 - Special requirements for hydrochloric acid.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... material approved for hydrochloric acid tanks by the Commandant (CG-522). (b) Containment systems for contaminated hydrochloric acid are approved by the Commandant (CG-522) on a case by case basis....

  15. 46 CFR 153.557 - Special requirements for hydrochloric acid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... material approved for hydrochloric acid tanks by the Commandant (CG-522). (b) Containment systems for contaminated hydrochloric acid are approved by the Commandant (CG-522) on a case by case basis....

  16. 46 CFR 153.557 - Special requirements for hydrochloric acid.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Special requirements for hydrochloric acid. 153.557... Equipment Special Requirements § 153.557 Special requirements for hydrochloric acid. (a) A containment system that carries hydrochloric acid must be lined with: (1) Natural rubber; (2) Neoprene; or (3)...

  17. 46 CFR 153.557 - Special requirements for hydrochloric acid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Special requirements for hydrochloric acid. 153.557... Equipment Special Requirements § 153.557 Special requirements for hydrochloric acid. (a) A containment system that carries hydrochloric acid must be lined with: (1) Natural rubber; (2) Neoprene; or (3)...

  18. 46 CFR 151.50-22 - Hydrochloric acid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Hydrochloric acid. 151.50-22 Section 151.50-22 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-22 Hydrochloric acid. (a) Hydrochloric acid shall be carried in gravity or pressure type cargo tanks which are independent of the...

  19. 46 CFR 151.50-22 - Hydrochloric acid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Hydrochloric acid. 151.50-22 Section 151.50-22 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-22 Hydrochloric acid. (a) Hydrochloric acid shall be carried in gravity or pressure type cargo tanks which are independent of the...

  20. 46 CFR 151.50-22 - Hydrochloric acid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Hydrochloric acid. 151.50-22 Section 151.50-22 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-22 Hydrochloric acid. (a) Hydrochloric acid shall be carried in gravity or pressure type cargo tanks which are independent of the...

  1. 46 CFR 151.50-22 - Hydrochloric acid.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Hydrochloric acid. 151.50-22 Section 151.50-22 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-22 Hydrochloric acid. (a) Hydrochloric acid shall be carried in gravity or pressure type cargo tanks which are independent of the...

  2. 46 CFR 151.50-22 - Hydrochloric acid.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Hydrochloric acid. 151.50-22 Section 151.50-22 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-22 Hydrochloric acid. (a) Hydrochloric acid shall be carried in gravity or pressure type cargo tanks which are independent of the...

  3. Persistent ion pairing in aqueous hydrochloric acid.

    PubMed

    Baer, Marcel D; Fulton, John L; Balasubramanian, Mahalingam; Schenter, Gregory K; Mundy, Christopher J

    2014-07-03

    For strong acids, like hydrochloric acid, the complete dissociation into an excess proton and conjugated base as well as the formation of independent solvated charged fragments is assumed. The existence of chloride-hydronium (Cl(-)···H3O(+)) contact ion pairs even in moderate concentration hydrochloric acid (2.5 m) demonstrates that the counterions do not behave merely as spectators. Through comparison of recent extended X-ray absorption fine structure (EXAFS) measurements to state-of-the-art density functional theory (DFT) simulations, we are able to obtain a unique view into the molecular structure of medium-to-high concentrated electrolytes. Here we report that the Cl(-)···H3O(+) contact ion pair structure persists throughout the entire concentration range studied and that these structures differ significantly from moieties studied in microsolvated hydrochloric acid gas phase clusters. Characterizing distinct populations of these ion pairs gives rise to a novel molecular level description of how to view the reaction network for acid dissociation and how it relates to our picture of acid-base equilibria.

  4. Persistent Ion Pairing in Aqueous Hydrochloric Acid

    SciTech Connect

    Baer, Marcel D.; Fulton, John L.; Balasubramanian, Mahalingam; Schenter, Gregory K.; Mundy, Christopher J.

    2014-07-03

    For strong acids, like hydrochloric acid, the complete dissociation into an excess proton and conjugated base as well as the formation of independent solvated charged fragments is assumed. The existence of a chloride-Hyronium (Cl-H3O+) contact ion pairs even in moderate concentration hydrochloric acid (2.5 m) demonstrates that the counter ions do not behave merely as spectators. Through the use of modern extended X-ray absorption fine structure (EXAFS) measurements in conjunction with state-of-the-art density functional theory (DFT) simulations, we are able to obtain an unprecedented view into the molecular structure of medium to high concentrated electrolytes. Here we report that the Cl-H3O+ contact ion pair structure persists throughout the entire concentration range studied and that these structures differ significantly from moieties studied in micro-solvated hydrochloric acid clusters. Characterizing distinct populations of these ion pairs gives rise to a novel molecular level description of how to think about the activity of the proton that impacts our picture of the pH scale. Funding for CJM, GKS, and JLF was provided by DOE Office of Science, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences. Funding for MDB was provided throught the Laboratory Directed Research and Development program at Pacific Northwest National Laboratory. MB was funded through Argonne National Laboratory.

  5. Emergency esophagogastrectomy for treatment of hydrochloric acid injury.

    PubMed

    Horváth, O P; Oláh, T; Zentai, G

    1991-07-01

    Eight patients with severe hydrochloric acid injury of the esophagus and stomach had early esophagogastrectomy. Four patients survived and 6 to 8 weeks later underwent successful substernal colon replacement. The value of early diagnosis and subsequent aggressive surgical management of patients who have ingested hydrochloric acid is stressed.

  6. Amino-acid contamination of aqueous hydrochloric acid.

    NASA Technical Reports Server (NTRS)

    Wolman, Y.; Miller, S. L.

    1971-01-01

    Considerable amino-acid contamination in commercially available analytical grade hydrochloric acid (37% HCl) was found. One bottle contained 8,300 nmol of amino-acids per liter. A bottle from another supplier contained 6,700 nmol per liter. The contaminants were mostly protein amino-acids and several unknowns. Data on the volatility of the amino-acids during HCl distillation were also obtained.

  7. Process and apparatus for electrolysis of hydrochloric acid

    SciTech Connect

    Minz, F.; Wiechers, H.

    1980-12-02

    In the production of chlorine and hydrogen from hydrochloric acid by electrolysis in an electrolysis cell comprising a plurality of vertically arranged bipolar electrodes, a diaphragm arranged between each two electrodes to divide the electrolysis chambers formed between them into an anolyte chamber and a catholyte chamber, and outlet and inlet devices for the electrolyte, the improvement which comprises electrolyzing the hydrochloric acid in at least two successive stages, and degassing the hydrochloric acid. Advantageously the hydrochloric acid moves from bottom to top, first through an upper stage and then through a lower stage. As a result less electrode surface is needed, a higher current density and/or voltage is possible so existing apparatus can be modified to connect more bipolar electrodes in series.

  8. 46 CFR 153.557 - Special requirements for hydrochloric acid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and... system that carries hydrochloric acid must be lined with: (1) Natural rubber; (2) Neoprene; or (3)...

  9. Enhancement of hydrolysis of Chlorella vulgaris by hydrochloric acid.

    PubMed

    Park, Charnho; Lee, Ja Hyun; Yang, Xiaoguang; Yoo, Hah Young; Lee, Ju Hun; Lee, Soo Kweon; Kim, Seung Wook

    2016-06-01

    Chlorella vulgaris is considered as one of the potential sources of biomass for bio-based products because it consists of large amounts of carbohydrates. In this study, hydrothermal acid hydrolysis with five different acids (hydrochloric acid, nitric acid, peracetic acid, phosphoric acid, and sulfuric acid) was carried out to produce fermentable sugars (glucose, galactose). The hydrothermal acid hydrolysis by hydrochloric acid showed the highest sugar production. C. vulgaris was hydrolyzed with various concentrations of hydrochloric acid [0.5-10 % (w/w)] and microalgal biomass [20-140 g/L (w/v)] at 121 °C for 20 min. Among the concentrations examined, 2 % hydrochloric acid with 100 g/L biomass yielded the highest conversion of carbohydrates (92.5 %) into reducing sugars. The hydrolysate thus produced from C. vulgaris was fermented using the yeast Brettanomyces custersii H1-603 and obtained bioethanol yield of 0.37 g/g of algal sugars.

  10. Surface roughness of composite resins subjected to hydrochloric acid.

    PubMed

    Roque, Ana Carolina Cabral; Bohner, Lauren Oliveira Lima; de Godoi, Ana Paula Terossi; Colucci, Vivian; Corona, Silmara Aparecida Milori; Catirse, Alma Blásida Concepción Elizaur Benitez

    2015-01-01

    The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite (FiltekTM Supreme), nanohybrid composite (Ice), and acid challenge (n=10) at 2 levels: absence and presence. Acid challenge was performed by immersion of specimens in hydrochloric acid (pH 1.2) for 1 min, 4 times per day for 7 days. The specimens not subjected to acid challenge were stored in 15 mL of artificial saliva at 37 oC. Afterwards, all specimens were submitted to abrasive challenge by a brushing cycle performed with a 200 g weight at a speed of 356 rpm, totaling 17.8 cycles. Surface roughness measurements (Ra) were performed and analyzed by ANOVA and Tukey test (p≤0.05). Surface roughness values were higher in the presence (1.07±0.24) as compared with the absence of hydrochloric acid (0.72±0.04). Surface roughness values were higher for microhybrid (1.01±0.27) compared with nanofilled (0.68 ±0.09) and nanohybrid (0.48±0.15) composites when the specimens were not subjects to acid challenge. In the presence of hydrochloric acid, microhybrid (1.26±0.28) and nanofilled (1.18±0,30) composites presents higher surface roughness values compared with nanohybrid (0.77±0.15). The hydrochloric acid affected the surface roughness of composite resin subjected to brushing.

  11. Kinetic-spectrophotometric determination of ascorbic acid by inhibition of the hydrochloric acid-bromate reaction

    NASA Astrophysics Data System (ADS)

    Ensafi, Ali A.; Rezaei, B.; Movahedinia, H.

    2002-10-01

    A new analytical method was developed for the determination of ascorbic acid in fruit juice and pharmaceuticals. The method is based on its inhibition effect on the reaction between hydrochloric acid and bromate. The decolourisation of Methyl Orange by the reaction products was used to monitor the reaction spectrophotometrically at 510 nm. The linearity range of the calibration graph depends on bromate concentration. The variable affecting the rate of the reaction was investigated. The method is simple, rapid, relatively sensitive and precise. The limit of detection is 7.6×10 -6 M and calibration rang is 8×10 -6-1.2×10 -3 M ascorbic acid. The relative standard deviation of seven replication determinations of 8×10 -6 and 2×10 -5 M ascorbic acid was 2.8 and 1.7%, respectively. The influence of potential interfering substance was studied. The method was successfully applied for the determination of ascorbic acid in pharmaceuticals.

  12. Depolymerization and de-N-acetylation of chitin oligomers in hydrochloric acid.

    PubMed

    Einbu, Aslak; Vårum, Kjell M

    2007-01-01

    The monosaccharide 2-amino-2-deoxy-D-glucose (glucosamine, GlcN) has recently drawn much attention in relation to its use to treat or prevent osteoarthritis in humans. Glucosamine is prepared from chitin, a process that is performed in concentrated acid, such as hydrochloric acid. This process involves two acid-catalyzed processes, that is, the hydrolysis of the glycosidic linkages (depolymerization) and of the N-acetyl linkages (de-N-acetylation). The depolymerization reaction has previously been found to be much faster compared to the deacetylation, with the consequence that the chitin chain will first be hydrolyzed to the monomer 2-acetamido-2-deoxy-D-glucose (N-acetylglucosamine, GlcNAc) which is subsequently deacetylated. We have found that the chitin disaccharide GlcNAc(1-->4)GlcNAc could be completely hydrolyzed to the monosaccharide GlcNAc with negligible concomitant de-N-acetylation, and the chitin disaccharide and monosaccharide were further used to study the depolymerization reaction and the de-N-acetylation reaction, respectively. The reactions were performed in hydrochloric acid as a function of acid concentration (3-12 M) and temperature (20-35 degrees C), and 1H-NMR spectroscopy was used to monitor the reaction rates. The 1H NMR spectrum of GlcNAc in concentrated (12 M) and deuterated hydrochloric acid at 25 degrees C was assigned. The glucofuranosyl oxazolinium (3) ion was found to exist in equilibrium with the alpha- and beta-anomers of the pyranose form of GlcNAc, where 3 was present in half the total molar concentrations of the two anomeric forms of GlcNAc. At lower acid concentration (3-6 M), only trace concentrations of 3 could be detected. The rate of de-N-acetylation of GlcNAc was determined as a function of hydrochloric acid concentration, showing a maximum at 6 M and decreasing by a factor of 2 upon decreasing or increasing the acid concentration to 3 or 12 M. The activation energy for hydrolysis of the N-acetyl linkage of GlcNAc was

  13. Kinetic study of free fatty acid esterification reaction catalyzed by recoverable and reusable hydrochloric acid.

    PubMed

    Su, Chia-Hung

    2013-02-01

    The catalytic performance and recoverability of several homogeneous acid catalysts (hydrochloric, sulfuric, and nitric acids) for the esterification of enzyme-hydrolyzed free fatty acid (FFA) and methanol were studied. Although all tested catalysts drove the reaction to a high yield, hydrochloric acid was the only catalyst that could be considerably recovered and reused. The kinetics of the esterification reaction catalyzed by hydrochloric acid was investigated under varying catalyst loading (0.1-1M), reaction temperature (303-343K), and methanol/FFA molar ratio (1:1-20:1). In addition, a pseudo-homogeneous kinetic model incorporating the above factors was developed. A good agreement (r(2)=0.98) between the experimental and calculated data was obtained, thus proving the reliability of the model. Furthermore, the reusability of hydrochloric acid in FFA esterification can be predicted by the developed model. The recoverable hydrochloric acid achieved high yields of FFA esterification within five times of reuse.

  14. Efficient regioselective O3-monodesilylation by hydrochloric acid in cyclodextrins.

    PubMed

    Gu, Jiamin; Chen, Tong; Wang, Qifang; Chen, Tieyu; Ling, Chang-Chun

    2015-06-17

    An efficient O3-monodesilylation method has been developed for the derivatization of per-3-O-silylated cyclodextrin (CD) derivatives. Using hydrochloric acid as a reagent, the O3-monodesilylation was found to be regioselective, mild, practical and general as it can be applied to all α-, β- and γ-CDs. The advantage of the methodology is that the acid-catalyzed O3-desilylation can be carried out in a stepwise manner so that different types of functional groups can be introduced to a CD molecule at different stage of the O3-desilylations. This makes the current methodology flexible and versatile. This current methodology constitutes one of the few methodologies available for the regioselective modification of CDs at the secondary face.

  15. In situ transesterification of highly wet microalgae using hydrochloric acid.

    PubMed

    Kim, Bora; Im, Hanjin; Lee, Jae W

    2015-06-01

    This study addresses in situ transesterification of highly wet microalgae with hydrochloric acid (HCl) as a catalyst. In situ transesterification was performed by heating the mixture of wet algal cells, HCl, methanol, and solvent in one pot, resulting in the fatty acid methyl ester (FAME) yield over 90% at 95°C. The effects of reaction variables of temperature, amounts of catalyst, reactant, and solvent, and type of solvents on the yield were investigated. Compared with the catalytic effect of H2SO4, in situ transesterification using HCl has benefits of being less affected by moisture levels that are as high as or above 80%, and requiring less amounts of catalyst and solvent. For an equimolar amount of catalyst, HCl showed 15wt.% higher FAME yield than H2SO4. This in situ transesterification using HCl as a catalyst would help to realize a feasible way to produce biodiesel from wet microalgae.

  16. Use of hydrochloric acid for determinining solid-phase arsenic partitioning in sulfidic sediments.

    PubMed

    Wilkin, Richard T; Ford, Robert G

    2002-11-15

    We examined the use of room-temperature hydrochloric acid (1-6 M) and salt solutions of magnesium chloride, sodium carbonate, and sodium sulfide for the removal of arsenic from synthetic iron monosulfides and contaminated sediments containing acid-volatile sulfides (AVS). Results indicate that acid-soluble arsenic reacts with H2S released from AVS phases and precipitates at low pH as disordered orpiment or alacranite. Arsenic sulfide precipitation is consistent with geochemical modeling in that conditions during acid extraction are predicted to be oversaturated with respect to orpiment, realgar, or both. Binding of arsenic with sulfide at low pH is sufficiently strong that 6 M HCl will not keep spiked arsenic in the dissolved fraction. Over a wide range of AVS concentrations and molar [As]/[AVS] ratios, acid extraction of arsenic from sulfide-bearing sediments will give biased results that overestimate the stability or underestimate the bioavailability of sediment-bound arsenic. Alkaline solutions of sodium sulfide and sodium carbonate are efficient in removing arsenic from arsenic sulfides and mixed iron-arsenic sulfides because of the high solubility of arsenic at alkaline pH, the formation of stable arsenic complexes with sulfide or carbonate, or both.

  17. Thallium Transfer from Hydrochloric Acid Media into Pure Ionic Liquids.

    PubMed

    Tereshatov, Evgeny E; Boltoeva, Maria Yu; Mazan, Valerie; Volia, Merinda F; Folden, Charles M

    2016-03-10

    Pure hydrophobic ionic liquids are known to extract metallic species from aqueous solutions. In this work we have systematically investigated thallium (Tl) extraction from aqueous hydrochloric acid (HCl) solutions into six pure fluorinated ionic liquids, namely imidazolium- and pyrrolidinium-based ionic liquids with bis(trifluoromethanesulfonyl)imide and bis(fluorosulfonyl)-imide anions. The dependence of the Tl extraction efficiency on the structure and composition of the ionic liquid ions, metal oxidation state, and initial metal and aqueous acid concentrations have been studied. Tl concentrations were on the order of picomolar (analyzed using radioactive tracers) and millimolar (analyzed using inductively coupled plasma mass spectrometry). The extraction of the cationic thallium species Tl(+) is higher for ionic liquids with more hydrophilic cations, while for the TlX(z)(3-z) anionic species (where X = Cl(-) and/or Br(-)), the extraction efficiency is greater for ionic liquids with more hydrophobic cations. The highest distribution value of Tl(III) was approximately 2000. An improved mathematical model based on ion exchange and ion pair formation mechanisms has been developed to describe the coextraction of two different anionic species, and the relative contributions of each mechanism have been determined.

  18. Hydrochloric acid: an overlooked driver of environmental change.

    PubMed

    Evans, Chris D; Monteith, Don T; Fowler, David; Cape, J Neil; Brayshaw, Susan

    2011-03-01

    Research on the ecosystem impacts of acidifying pollutants, and measures to control them, has focused almost exclusively on sulfur (S) and nitrogen (N) compounds. Hydrochloric acid (HCl), although emitted by coal burning, has been overlooked as a driver of ecosystem change because most of it was considered to redeposit close to emission sources rather than in remote natural ecosystems. Despite receiving little regulatory attention, measures to reduce S emissions, and changes in energy supply, have led to a 95% reduction in United Kingdom HCl emissions within 20 years. Long-term precipitation, surface water, and soil solution data suggest that the near-disappearance of HCl from deposition could account for 30-40% of chemical recovery from acidification during this time, affecting both near-source and remote areas. Because HCl is highly mobile in reducing environments, it is a more potent acidifier of wetlands than S or N, and HCl may have been the major driver of past peatland acidification. Reduced HCl loadings could therefore have affected the peatland carbon cycle, contributing to increases in dissolved organic carbon leaching to surface waters. With many regions increasingly reliant on coal for power generation, HCl should be recognized as a potentially significant constituent of resulting emissions, with distinctive ecosystem impacts.

  19. Reprocessing system with nuclide separation based on chromatography in hydrochloric acid solution

    SciTech Connect

    Suzuki, Tatsuya; Tachibana, Yu; Koyama, Shi-ichi

    2013-07-01

    We have proposed the reprocessing system with nuclide separation processes based on the chromatographic technique in the hydrochloric acid solution system. Our proposed system consists of the dissolution process, the reprocessing process, the minor actinide separation process, and nuclide separation processes. In the reprocessing and separation processes, the pyridine resin is used as a main separation media. It was confirmed that the dissolution in the hydrochloric acid solution is easily achieved by the plasma voloxidation and by the addition of oxygen peroxide into the hydrochloric acid solution.

  20. [Concentration of hydrochloric acid and pepsin in gastric juice in dogs after starvation and refeeding].

    PubMed

    Andreeva, Iu V; Polenov, S A

    2005-03-01

    Feeding fogs with meat after a 3-day period of starvation increased hydrochloric acid concentration with subsequent return of the parameter to normal values. Under the same conditions, pepsin concentration decreased and raised up after re-feeding. Histamine administration following the starvation decreased hydrochloric acid concentration with subsequent normalising. In three days after re-feeding and histamine administration, pepsin concentration drooped owing, probably, to a decrease of parietal cell H2-receptor affinity to histamine. Pentagastrin administration after the starvation increased hydrochloric acid concentration. The findings suggest G-cell function inhibition occurring after a 3-day starvation which is important for the stomach mucous membrane protection.

  1. Fatal myocardial infarction after hydrochloric acid ingestion in a suicide attempt.

    PubMed

    Sari, Ibrahim; Zengin, Suat; Pehlivan, Yavuz; Davutoglu, Vedat; Yildirim, Cuma

    2008-06-01

    Ingestion of acid-containing household products either accidentally or for suicide attempt is a common form of intoxication. Hydrochloric acid is widely used as an antirust compound or cleaner in homes and is highly corrosive and generally causes coagulation necrosis which could lead to perforation in the gastrointestinal system. Although hydrochloric acid ingestion is mainly harmful to the gastrointestinal system, it may also cause metabolic acidosis, hemolysis, renal failure, and fatality as well. Cardiovascular manifestations of hydrochloric acid ingestion are extremely rare, and we report a 48-year-old man who died of acute inferolateral myocardial infarction after hydrochloric acid ingestion in a suicide attempt who had no history of coronary artery disease. In conclusion, although cardiovascular manifestations of hydrochloric acid ingestion are extremely rare, the ingestion may still cause myocardial infarction which could be fatal. Physicians dealing with hydrochloric acid ingestion in the ED should be aware of this possibility and always obtain serial electrocardiograms even if the patient has no cardiac complaint.

  2. Laboratory investigation of three distinct emissions monitors for hydrochloric acid.

    PubMed

    Dene, Charles E; Pisano, John T; Durbin, Thomas D; Bumiller, Kurt; Crabbe, Keith; Muzio, Lawrence J

    2016-12-01

    The measurement of hydrochloric acid (HCl) on a continuous basis in coal-fired plants is expected to become more important if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration. For this study, the operational performance of three methods/instruments, including tunable diode laser absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and Fourier transform infrared (FTIR) spectroscopy, were evaluated over a range of real-world operating environments. Evaluations were done over an HCl concentration range of 0-25 ppmv and temperatures of 25, 100, and 185 °C. The average differences with respect to temperature were 3.0% for the TDL for values over 2.0 ppmv and 6.9% of all concentrations, 3.3% for the CRDS, and 4.5% for the FTIR. Interference tests for H2O, SO2, and CO, CO2, and NO for a range of concentrations typical of flue gases from coal-fired power plants did not show any strong interferences. The possible exception was an interference from H2O with the FTIR. The instrument average precision over the entire range was 4.4% for the TDL with better precision seen for concentrations levels of 2.0 ppmv and above, 2.5% for the CRDS, and 3.5% for the FTIR. The minimum detection limits were all on the order of 0.25 ppmv, or less, utilizing the TDL values with a 5-m path. Zero drift was found to be 1.48% for the TDL, 0.88% for the CRDS, and 1.28% for the FTIR.

  3. The effectiveness of a modified hydrochloric acid-quartz-pumice abrasion technique on fluorosis stains: a case report.

    PubMed

    Erdogan, G

    1998-02-01

    Endemic dental fluorosis is a form of enamel hypoplasia characterized by moderate-to-severe staining of the tooth surface. Since 1916, numerous investigators have used hydrochloric acid alone on fluorosis stains. More recently, 18% hydrochloric acid-pumice microabrasion has been used to achieve color modification. The main disadvantage of this procedure is the high concentration and low viscosity of hydrochloric acid, which can cause damage to oral and dental tissues. To eliminate this problem, quartz particles can be mixed with the hydrochloric acid. The quartz particles prevent the hydrochloric acid from flowing uncontrollablely by altering it to a gel-like form. A modified 18% hydrochloric acid-quartz-pumice abrasion technique was used to remove fluorine stains from vital teeth in a teenager.

  4. Kinetics of Hydrochloric Acid Leaching of Titanium from Titanium-Bearing Electric Furnace Slag

    NASA Astrophysics Data System (ADS)

    Zheng, Fuqiang; Chen, Feng; Guo, Yufeng; Jiang, Tao; Travyanov, Andrew Yakovlevich; Qiu, Guanzhou

    2016-05-01

    The hydrochloric acid leaching of titanium from titanium-bearing electric furnace slag was investigated under different experimental conditions. The results indicate that particle size, hydrochloric acid concentration and reaction temperature were of significance to the leaching kinetics. Specifically, reaction temperature was the most important factor followed by hydrochloric acid concentration and particle size. The shrinking core model was used to describe the leaching process which was controlled by surface chemical reaction. The kinetic equation was obtained and the activation energy was found to be 43.16 kJ/mol. Iron and calcium species were almost completely dissolved in the acid when the extraction degree of titanium reached 99.84%. MgO (19.34 wt.%) and Al2O3 (32.45 wt.%) in the spinel were still in the leaching residue and SiO2 (43.53 wt.%) in the form of quartz remained in the leaching residue.

  5. Microstructure and far infrared emission properties of tourmaline powders eroded by hydrochloric acid.

    PubMed

    Liang, Jinsheng; Li, Juan; Meng, Junping; Ding, Yan; Xue, Gang

    2010-03-01

    The microstructure and far infrared emission properties of tourmaline powders eroded by hydrochloric acid were investigated. The indexes including crystal structure, unit cell volume, microstructure and infrared spectra were characterized by X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results show that the crystal structure was not changed; however, the unit cell volume decreased, the angularities of tourmaline particles became smooth, and there appeared nanohollows on their surfaces. The infrared emission properties were enhanced at proper concentrations of hydrochloric acid solutions.

  6. Extraction of Alumina from high-silica bauxite by hydrochloric acid leaching using preliminary roasting method

    NASA Astrophysics Data System (ADS)

    Valeev, D. V.; Mansurova, E. R.; Bychinskii, V. A.; Chudnenko, K. V.

    2016-02-01

    A process of dissolution Severoonezhsk deposit boehmite-kaolinite bauxite by hydrochloric acid, as well as the processes that occur during open-air calcination, were investigated. A dehydration process has been studied, and the basic phase transformation temperatures were identified. Temperature and time of calcination influence on bauxite dehydration speed were determined. It is shown that the preliminary calcination increases the extraction ratio of alumina into solution up to 89%. Thermodynamic modelling of physical and chemical processes of bauxite decomposition by hydrochloric acid and the basic forms of aluminium speciation in solution were obtained.

  7. The use of dilute hydrochloric acid and cimetidine to reverse severe metabolic alkalosis.

    PubMed

    Rowlands, B J; Tindall, S F; Elliott, D J

    1978-02-01

    Two cases of severe metabolic alkalosis associated with gastric hypersecretion were successfully treated with dilute hydrochloric acid and a histamine H2-receptor antagonist given by intravenous infusion. This combined therapy with electrolyte replacement and suppression of gastric secretion is valuable in the control of this serious metabolic abnormality when conventional treatment is unsuccessful or contraindicated.

  8. Model Experiment of Thermal Runaway Reactions Using the Aluminum-Hydrochloric Acid Reaction

    ERIC Educational Resources Information Center

    Kitabayashi, Suguru; Nakano, Masayoshi; Nishikawa, Kazuyuki; Koga, Nobuyoshi

    2016-01-01

    A laboratory exercise for the education of students about thermal runaway reactions based on the reaction between aluminum and hydrochloric acid as a model reaction is proposed. In the introductory part of the exercise, the induction period and subsequent thermal runaway behavior are evaluated via a simple observation of hydrogen gas evolution and…

  9. ST-segment elevation mimicking myocardial infarction after hydrochloric acid ingestion: Acute caustic myocarditis.

    PubMed

    San Antonio, Rodolfo; Pujol López, Margarida; Perea, Rosario Jesús; Sabaté, Manel

    ST-segment elevation after hydrochloric acid ingestion has barely been described in the literature, without identification of its causal mechanism. We hypothesize that acute caustic myocarditis, by direct contact between necrotic upper gastrointestinal tract and pericardium may induce the ECG findings.

  10. Postoperative metabolic alkalosis and acute renal failure: rationale for the use of hydrochloric acid.

    PubMed

    Shavelle, H S; Parke, R

    1975-10-01

    Metabolic alkalosis secondary to chloride depletion, especially following gastrointestinal surgery and associated with acute renal failure, is a frequent clinical occurrence. Management of the resultant acid-base disturbance mandates chloride replacement. The presence of oliguria limits the choice of accompanying cation. The use of intravenous hydrochloric acid to correct and maintain proper chloride balance, secondary to external gastric fluid losses, is recommended as a straightforward approach. Two brief case synopses are presented. Both patients, florid examples of profound chloride depletion, required large amounts of intravenous hydrochloric acid. The options regarding the choice of chloride solution, hazards involved, and a simplified schema of replacement therapy are presented. Combined gastrointestinal and renal dysfunction create unusual biochemical and clinical alterations and may result in a complex management problem.

  11. Extraction of gallium(III) from hydrochloric acid solutions by trioctylammonium-based mixed ionic liquids.

    PubMed

    Katsuta, Shoichi; Okai, Miho; Yoshimoto, Yuki; Kudo, Yoshihiro

    2012-01-01

    The extractabilities of aluminium(III), gallium(III), and indium(III) from hydrochloric acid solutions were investigated using a mixture of two protic ionic liquids, trioctylammonium bis(trifluoromethanesulfonyl)amide ([TOAH][NTf(2)]) and trioctylammonium nitrate ([TOAH][NO(3)]). At a HCl concentration of 4 mol L(-1) or more, gallium(III) was nearly quantitatively extracted and the extractability order was Ga > Al > In. The extractability of gallium(III) increased with increasing [TOAH][NO(3)] content in the mixed ionic liquid. The extracted gallium(III) was quantitatively stripped with aqueous nitric acid solutions. The separation and recovery of gallium(III) from hydrochloric acid solutions containing excess indium(III) was demonstrated using the mixed ionic liquid.

  12. Rare earth elements recycling from waste phosphor by dual hydrochloric acid dissolution.

    PubMed

    Liu, Hu; Zhang, Shengen; Pan, Dean; Tian, Jianjun; Yang, Min; Wu, Maolin; Volinsky, Alex A

    2014-05-15

    This paper is a comparative study of recycling rare earth elements from waste phosphor, which focuses on the leaching rate and the technical principle. The traditional and dual dissolution by hydrochloric acid (DHA) methods were compared. The method of dual dissolution by hydrochloric acid has been developed. The Red rare earth phosphor (Y0.95Eu0.05)2O3 in waste phosphor is dissolved during the first step of acid leaching, while the Green phosphor (Ce0.67Tb0.33MgAl11O19) and the Blue phosphor (Ba0.9Eu0.1MgAl10O17) mixed with caustic soda are obtained by alkali sintering. The excess caustic soda and NaAlO2 are removed by washing. The insoluble matter is leached by the hydrochloric acid, followed by solvent extraction and precipitation (the DHA method). In comparison, the total leaching rate of the rare earth elements was 94.6% by DHA, which is much higher than 42.08% achieved by the traditional method. The leaching rate of Y, Eu, Ce and Tb reached 94.6%, 99.05%, 71.45%, and 76.22%, respectively. DHA can decrease the consumption of chemicals and energy. The suggested DHA method is feasible for industrial applications.

  13. Robust antifogging antireflective coatings on polymer substrates by hydrochloric acid vapor treatment.

    PubMed

    Li, Tong; He, Junhui; Yao, Lin; Geng, Zhi

    2015-04-15

    Antireflective coatings on polymer substrates have received significant attention for their potential applications. In this paper, robust microporous antifogging antireflective coatings on polymer substrates were prepared from acid-catalyzed silica sol followed by hydrochloric acid vapor solidification at mild temperature below glass transition temperatures of common polymers. The coatings passed 3H pencil hardness test, sand flow test and water-drop test. They had excellent antireflective and antifogging properties. The maximum transmittance of coatings on PMMA substrates reached 100.0% (the maximum transmittance wavelength could be regulated) and average transmittance reached 99.0% in 400-800 nm. The advantage and mechanism of hydrochloric acid vapor solidification and mechanical strength enhancement of coatings are discussed in contrast to ammonia vapor treatment and air vapor treatment. The hydrochloric acid vapor treatment results in a dense integrated microporous film structure. Optical properties were characterized by a UV-Vis spectrophotometer. Surface wettability was studied by a contact angle/interface system. Surface morphologies and structures of coatings were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atom force microscopy (AFM).

  14. Interaction of Benzimidazoles and Benzotriazole: Its Corrosion Protection Properties on Mild Steel in Hydrochloric Acid

    NASA Astrophysics Data System (ADS)

    Ramya, K.; Mohan, Revathi; Joseph, Abraham

    2014-11-01

    Synergistic hydrogen-bonded interaction of alkyl benzimidazoles and 1,2,3-benzotrizole and its corrosion protection properties on mild steel in hydrochloric acid at different temperatures have been studied using polarization, EIS, adsorption, surface studies, and computational methods. The extent of synergistic interaction increases with temperature. Quantum chemical approach is used to calculate some electronic properties of the molecules and to ascertain the synergistic interaction, inhibitive effect, and molecular structures. The corrosion inhibition efficiencies and the global chemical reactivity relate to some parameters, such as total energy, E HOMO, E LUMO, and gap energy (Δ E). 1,2,3-Benzotrizole interacts with benzimidazoles derivatives up to a bond length of approximately 1.99 Å. This interaction represents the formation of a hydrogen bond between the 1,2,3-benzotrizole and benzimidazoles. This synergistic interaction of 1,2,3-benzotrizole and benzimidazole derivatives offers extended inhibition efficiency toward mild steel in hydrochloric acid.

  15. Pretreatment of corn stover for sugar production using dilute hydrochloric acid followed by lime.

    PubMed

    Zu, Shuai; Li, Wen-zhi; Zhang, Mingjian; Li, Zihong; Wang, Ziyu; Jameel, Hasan; Chang, Hou-min

    2014-01-01

    In this study, a two stage process was evaluated to increase the sugar recovery. Firstly, corn stover was treated with diluted hydrochloric acid to maximize the xylose yield, and then the residue was treated with lime to alter the lignin structure and swell the cellulose surface. The optimal condition was 120 °C and 40 min for diluted hydrochloric acid pretreatment followed by lime pretreatment at 60 °C for 12h with lime loading at 0.1 g/g of substrate. The glucose and xylose yield was 78.0% and 97.0%, respectively, with cellulase dosage at 5 FPU/g of substrate. The total glucose yield increased to 85.9% when the cellulase loading was increased to 10 FPU/g of substrate. This two stage process was effective due to the swelling of the internal surface, an increase in the porosity and a decrease in the degree of polymerization.

  16. A Concentrated Hydrochloric Acid-based Method for Complete Recovery of DNA from Bone.

    PubMed

    Huynen, Leon; Lambert, David M

    2015-11-01

    The successful extraction of DNA from historical or ancient animal bone is important for the analysis of discriminating genetic markers. Methods used currently rely on the digestion of bone with EDTA and proteinase K, followed by purification with phenol/chloroform and silica bed binding. We have developed a simple concentrated hydrochloric acid-based method that precludes the use of phenol/chloroform purification and can lead to a several-fold increase in DNA yield when compared to other commonly used methods. Concentrated hydrochloric acid was shown to dissolve most of the undigested bone and allowed the efficient recovery of DNA fragments <100 bases in length. This method should prove useful for the recovery of DNAs from highly degraded animal bone, such as that found in historical or ancient samples.

  17. Hydrochloric acid aerosol formation by the interaction of hydrogen chloride with humid air

    NASA Technical Reports Server (NTRS)

    Rhein, R. A.

    1973-01-01

    The conditions in which hydrochloric acid aerosol is predicted by the interaction of hydrogen chloride gas with the water vapor in humid air are analyzed. The liquid gas phase equilibrium for the HCL-H2O system is expressed in terms of relative humidity and hydrogen chloride concentration as parts per million, units commonly used in pollution studies. Presented are the concentration (wt %) of HC1 in the aerosol and the concentration of aerosol (ppm) predicted.

  18. Laboratory studies on the retention of nitric acid, hydrochloric acid and ammonia on aerosol filters

    NASA Astrophysics Data System (ADS)

    Keck, Lothar; Wittmaack, Klaus

    Retention efficiencies of nitric acid, hydrochloric acid and ammonia were measured for different filters, with particular emphasis on cellulose (CE) and cellulose acetate-nitrate (CA) materials. Gases were produced either by nebulising aqueous solutions or by a novel technique based on the desorption from ammonium salts deposited on quartz fibre (QF) filters. Efficiencies for pure acidic gases and ammonia on CE and CA ranged from very low (⩽3.6%) to low (˜10% for HNO 3 on CE). In contrast, if acidic gases and ammonia were supplied in equimolar concentrations, they were retained (almost) completely on CE, with high efficiency on CA (60-80% for NH 3+HNO 3; 20-45% for NH 3+HCl), also with high efficiency on glass fibre filter, but with very low efficiency on QF and Teflon (Tf) filters (<1%). For CA, retention efficiencies were found to increase with increasing relative humidity and to decrease with decreasing mean pressure at which the filters were exposed to the gases. Once retained on CA filters, the retained gases may be lost again during subsequent exposure to clean air.

  19. Chemical reduction of europium(III) in hydrochloric acid

    SciTech Connect

    Atanasyants, A.G.; Gurinov, Yu.S.; Sofenina, E.V.

    1988-07-10

    The authors have devised a method for use at set pH and temperature, in which the volume of hydrogen produced is recorded and samples are taken for europium(II) analysis. The solution is poured into a glass cell with a thermostatic jacket; argon is passed through a capillary tube 2 for 0.5 h before the reduction is started, with the bubbling rate determined from the change in level in a burette. This burette is also used to record the hydrogen volume. The europium(II) concentration is determined by titration with potassium dichromate by a standard method. Europium is reduced by zinc in acid solution. The zinc consumption in hydrogen production can be reduced by operating at pH 2-3, with the precipitant introduced after the reaction starts.

  20. Fact Sheet - Final Air Toxics Rule for Steel Pickling and HCI Process Facilities and Hydrochloric Acid Regeneration Plants

    EPA Pesticide Factsheets

    Fact Sheet summarizing the main points of the national emssions standard for hazaradous air pollutants (NESHAP) for Steel Pickling— HCl Process Facilities and Hydrochloric Acid Regeneration Plants as promulgated on June 22, 1999.

  1. Distribution of zirconium in petroleum sulfoxides during extraction and sorption from nitric and hydrochloric acid solutions

    SciTech Connect

    Turanov, A.N.

    1988-11-20

    Petroleum sulfoxides (PSO) are effective extractants for several metals. We discussed the distribution of petroleum sulfoxides and zirconium between aqueous solutions of hydrochloric and nitric acid and organic solvents, and also the macroporous sorbent impregnated with PSO. For the investigation we used a macroposous copolymer of styrene with divinylbenzene. Our investigation showed a noticeable decrease in the contamination of the raffinates by petroleum sulfoxides and their more complete utilization as extractant of metals from solutions of acids when PSO is deposited on a macroporous copolymer of styrene with divinylbenzene.

  2. Comparison between phosphoric acid and hydrochloric acid in microabrasion technique for the treatment of dental fluorosis

    PubMed Central

    Bassir, Mahshid Mohammadi; Bagheri, Golnaz

    2013-01-01

    Purpose: To compare the effectiveness of phosphoric acid (H3PO4)-pumice compound with conventional hydrochloric acid (HCl)-pumice compound in treating different severities of dental fluorosis with the microabrasion technique. Materials and Methods: Sixty-seven anterior teeth from seven patients with different severities of dental fluorosis were treated. In each patient, half of the teeth were treated with HCl-pumice compound and the other half with H3PO4-pumice compound (split-mouth design). Both treatment compounds were applied for 30-second periods and treatment continued up to 10 minutes. Before and after treatment, standardized photographs were taken. The photographs were compared by two experienced observers unaware of the modality of treatment. Two indices of aesthetics, improvement in appearance (IA) and degree of stain removal (DSR), were determined according to a visual analog scale. The inter- and intra-correlation coefficients were made; then, statistical analyses were calculated using Mann-Whitney and t-test. Results: There were no significant differences in interobserver evaluation. Improvements in aesthetic indices were observed in all fluorotic teeth by both compounds; however, the mean treatment time with HCl-pumice was significantly lower than H3PO4-pumice. Conclusion: The H3PO4-pumice compound improved aesthetic indices in fluorotic teeth similar to the HCl-pumice compound. PMID:23349575

  3. Escherichia coli and Salmonella enterica are protected against acetic acid, but not hydrochloric acid, by hypertonicity.

    PubMed

    Chapman, B; Ross, T

    2009-06-01

    Chapman et al. (B. Chapman, N. Jensen, T Ross, and M. B. Cole, Appl. Environ. Microbiol. 72:5165-5172, 2006) demonstrated that an increased NaCl concentration prolongs survival of Escherichia coli O157 SERL 2 in a broth model simulating the aqueous phase of a food dressing or sauce containing acetic acid. We examined the responses of five other E. coli strains and four Salmonella enterica strains to increasing concentrations of NaCl under conditions of lethal acidity and observed that the average "lag" time prior to inactivation decreases in the presence of hydrochloric acid but not in the presence of acetic acid. For E. coli in the presence of acetic acid, the lag time increased with increasing NaCl concentrations up to 2 to 4% at pH 4.0, up to 4 to 6% at pH 3.8, and up to 4 to 7% (wt/wt of water) NaCl at pH 3.6. Salmonella was inactivated more rapidly by combined acetic acid and NaCl stresses than E. coli, but increasing NaCl concentrations still decreased the lag time prior to inactivation in the presence of acetic acid; at pH 4.0 up to 1 to 4% NaCl was protective, and at pH 3.8 up to 1 to 2% NaCl delayed the onset of inactivation. Sublethal injury kinetics suggest that this complex response is a balance between the lethal effects of acetic acid, against which NaCl is apparently protective, and the lethal effects of the NaCl itself. Compared against 3% NaCl, 10% (wt/wt of water) sucrose with 0.5% NaCl (which has similar osmotic potential) was found to be equally protective against adverse acetic acid conditions. We propose that hypertonicity may directly affect the rate of diffusion of acetic acid into cells and hence cell survival.

  4. Phase equilibria and distribution constants of metal ions in diantipyryl alkane-organic acid-hydrochloric acid-water systems

    NASA Astrophysics Data System (ADS)

    Degtev, M. I.; Popova, O. N.; Yuminova, A. A.

    2014-08-01

    The ability of antipyrine and its derivatives (diantipyryl alkanes) to form separating systems in the presence of salicylic (sulfosalicylic) acid and hydrochloric acid and water is studied. The optimum volume of the organic phase, the composition of complexes, and the mechanism for the distribution of metal ions are determined, depending on the concentrations of the main components and the salting-out agent. The complex distribution and extraction constants are calculated.

  5. Formation of linear polyenes in poly(vinyl alcohol) films catalyzed by phosphotungstic acid, aluminum chloride, and hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Tretinnikov, O. N.; Sushko, N. I.; Malyi, A. B.

    2016-07-01

    Formation of linear polyenes-(CH=CH)n-via acid-catalyzed thermal dehydration of polyvinyl alcohol in 9- to 40-µm-thick films of this polymer containing hydrochloric acid, aluminum chloride, and phosphotungstic acid as dehydration catalysts was studied by electronic absorption spectroscopy. The concentration of long-chain ( n ≥ 8) polyenes in films containing phosphotungstic acid is found to monotonically increase with the duration of thermal treatment of films, although the kinetics of this process is independent of film thickness. In films containing hydrochloric acid and aluminum chloride, the formation rate of polyenes with n ≥ 8 rapidly drops as film thickness decreases and the annealing time increases. As a result, at a film thickness of less than 10-12 µm, long-chain polyenes are not formed at all in these films no matter how long thermal duration is. The reason for this behavior is that hydrochloric acid catalyzing polymer dehydration in these films evaporates from the films during thermal treatment, the evaporation rate inversely depending on film thickness.

  6. Reproducible protein analysis by CE using linear polyacrylamide-coated capillaries and hydrochloric acid rinsing.

    PubMed

    Suratman, Adhitasari; Wätzig, Hermann

    2007-07-01

    Hydrochloric acid was investigated as a rinsing reagent to remove adsorbed proteins from linear polyacrylamide-coated capillaries for electrophoresis. Three model proteins were used, namely cytochrome c as a basic protein, beta-lactoglobulin as an acidic protein, and beta-casein as a more easily denaturing protein. In order to regenerate capillary surfaces, they have been rinsed for 5 min with 2 M hydrochloric acid, 5 min with water, and then 30 min with buffer after every tenth run. It was found important to perform this regeneration procedure on time. The obtained results show good repeatability of the apparent EOF mobility with percentage RSDs below 3% (n = 60) in various cases. These good results were mainly confirmed in long-term series with more than 200 runs each. Only very high concentrations (175 microM) of beta-lactoglobulin and beta-casein at pH 3.5 gave RSD% values above 5%. For these conditions, the further test of 85% m/m phosphoric acid as rinsing reagent showed a good repeatability of the apparent EOF mobilities as well.

  7. Effect of beverages on bovine dental enamel subjected to erosive challenge with hydrochloric acid.

    PubMed

    Amoras, Dinah Ribeiro; Corona, Silmara Aparecida Milori; Rodrigues, Antonio Luiz; Serra, Mônica Campos

    2012-01-01

    This study evaluated by an in vitro model the effect of beverages on dental enamel previously subjected to erosive challenge with hydrochloric acid. The factor under study was the type of beverage, in five levels: Sprite® Zero Low-calorie Soda Lime (positive control), Parmalat® ultra high temperature (UHT) milk, Ades® Original soymilk, Leão® Ice Tea Zero ready-to-drink low-calorie peach-flavored black teaand Prata® natural mineral water (negative control). Seventy-five bovine enamel specimens were distributed among the five types of beverages (n=15), according to a randomized complete block design. For the formation of erosive wear lesions, the specimens were immersed in 10 mL aqueous solution of hydrochloric acid 0.01 M for 2 min. Subsequently, the specimens were immersed in 20 mL of the beverages for 1 min, twice daily for 2 days at room temperature. In between, the specimens were kept in 20 mL of artificial saliva at 37ºC. The response variable was the quantitative enamel microhardness. ANOVA and Tukey's test showed highly significant differences (p<0.00001) in the enamel exposed to hydrochloric acid and beverages. The soft drink caused a significantly higher decrease in microhardness compared with the other beverages. The black tea caused a significantly higher reduction in microhardness than the mineral water, UHT milk and soymilk, but lower than the soft drink. Among the analyzed beverages, the soft drink and the black tea caused the most deleterious effects on dental enamel microhardness.

  8. Reactive airways dysfunction syndrome in housewives due to a bleach-hydrochloric acid mixture.

    PubMed

    Gorguner, Metin; Aslan, Sahin; Inandi, Tacettin; Cakir, Zeynep

    2004-02-01

    The sudden onset of asthmalike symptoms and persistence of airway reactivity following an acute exposure to an irritant gas or vapor has been termed reactive airways dysfunction syndrome (RADS). A mixture of sodium hypochlorite (bleach, 40%) and hydrochloric acid (18%) is commonly used as a household cleaning solution in our region. From this mixture, chlorine gas is produced, which can cause airway damage and ensuing RADS. Here we describe findings of patients with RADS due to this cleaning mixture, and determine factors associated with a favorable outcome. Data were collected retrospectively on 55 symptomatic patients presenting to our emergency department after inhalation exposure to a mixture of bleach and hydrochloric acid. Symptoms, past medical and smoking history, details of the exposure, initial peak expiratory flow rate (PEFR) and oxygenation, and acute reversibility of airways obstruction were documented. All patients met previously defined criteria for the diagnosis of RADS, but did not undergo methacholine challenge testing and bronchoalveolar lavage or histopathologic study. Fifty patients were followed over the course of 3 mo. The majority of exposures (64%) occurred in the bathroom or kitchen. Only 21 of 55 (38%) patients showed an improvement in PEFR of 15% or greater following two beta(2)-agonist inhalation treatments. In follow-up, 48 patients (87%) improved clinically and functionally (FEV(1)). Seven patients (13%) deteriorated, with ARDS developing in two, one of whom died from respiratory failure. Advanced age, initial low PEFR, exposure in a small enclosed area, use immediately after mixing, and prolonged short- and long-term exposures were associated with a poorer prognosis. This descriptive study is the largest case series in the literature of RADS developing after exposure to a bleach-hydrochloric acid mixture. The optimum acute treatment and long-term outcomes for patients with RADS due to this combination still need to be determined.

  9. Determination of uranium isotopes in environmental samples by anion exchange in sulfuric and hydrochloric acid media.

    PubMed

    Popov, L

    2016-09-01

    Method for determination of uranium isotopes in various environmental samples is presented. The major advantages of the method are the low cost of the analysis, high radiochemical yields and good decontamination factors from the matrix elements, natural and man-made radionuclides. The separation and purification of uranium is attained by adsorption with strong base anion exchange resin in sulfuric and hydrochloric acid media. Uranium is electrodeposited on a stainless steel disk and measured by alpha spectrometry. The analytical method has been applied for the determination of concentrations of uranium isotopes in mineral, spring and tap waters from Bulgaria. The analytical quality was checked by analyzing reference materials.

  10. Spectrophotometric determination of gold(iii) with p-dimethylaminobenzilidenerhodanine in hydrochloric acid-ethanol medium.

    PubMed

    Borissova, R

    The reaction between gold(III) and p-dimethylaminobenzilidenerhodanine in hydrochloric acid medium containing 20% v/v ethanol has been studied spectrophotometrically. It has been established that the process is very complicated: gold(III) is reduced to gold(I) which reacts with unchanged reagent. The value of the equilibrium constant is 2.56 +/- 0.45. Conditions are proposed for the determination of 2-8 mug of gold in 25 ml, with a standard deviation of 0.04 mug 25 ml .

  11. A Method for Monitoring Organic Chlorides, Hydrochloric Acid and Chlorine in Air

    NASA Technical Reports Server (NTRS)

    Dennison, J. E.; Menichelli, R. P.

    1971-01-01

    While not commonly presented in nonurban atmospheres, organic chlorides, hydrochloric acid and chlorine are significant in industrial air pollution and industrial hygiene. Based on a microcoulometer, a much more sensitive method than has heretofore been available has been developed for monitoring these air impurities. The method has a response time (90%) of about twenty seconds, requires no calibration, is accurate to +/- 2.5%, and specific except for bromide and iodide interferences. The instrument is portable and has been operated unattended for 18 hours without difficulty.

  12. Synthesis of hydrochloric acid solution for total mercury determination in natural waters.

    PubMed

    Patel-Sorrentino, Nathalie; Benaim, Jean-Yves; Cossa, Daniel; Lucas, Yves

    2011-01-01

    Total mercury (Hg(T)) determination requires the addition of concentrated hydrochloric acid solution (≥10 mol L(-1) HCl) in relatively high amounts to preserve the samples and to prepare reagent solutions. A method for the preparation of concentrated HCl with Hg(T) concentration of lower than 5 ng L(-1) is described in this article. It is based on the well-known chemical reaction: 2 NH(4)Cl + H(2)SO(4) → (NH(4))(2)SO(4) + 2 HCl. This method is validated thanks to the US Environmental Protection Agency method 1631 and standard reference materials BCR-579 (mercury in coastal seawater).

  13. Potentiodynamic polarization effect on phase and microstructure of SAC305 solder in hydrochloric acid solution

    NASA Astrophysics Data System (ADS)

    Zaini, Nurwahida Binti Mohd; Nazeri, Muhammad Firdaus Bin Mohd

    2016-07-01

    The corrosion analysis of SAC305 lead free solder was investigated in Hydrochloric acid (HCl) solution. Potentiodynamic polarization was used to polarize the SAC305. The effect of polarization on the phase and microstructure were compared to as-prepared SAC305 solder. Potentiodynamic polarization introduces mixed corrosion products on the surface of SAC305 solder. The XRD analysis confirms that the mixed corrosion products emerged on the surface after polarization by formation of SnO and SnO2 of which confirmed that dissolution of Sn was dominant during polarization. Microstructure analysis reveal the presence of gap and porosities produced limits the protection offered by the passivation film.

  14. Distribution of orally ingested hydrochloric acid in the thoracoabdominal cavity after death.

    PubMed

    Yoshitome, Kei; Miyaishi, Satoru; Ishikawa, Takaki; Yamamoto, Yuji; Ishizu, Hideo

    2006-05-01

    The authors encountered a case of hydrochloric acid (HCl) poisoning, thought to be caused by oral ingestion of concentrated HCl. Coagulation of the surface of the tongue and the mucosa of the pharynx, esophagus, and stomach were observed at forensic autopsy. An overabundance of Cl- was found in the gastric contents, corresponding to 8.19 mL of concentrated HCl. This was suggested to be a lethal oral dose of concentrated HCl, and the cause of death was determined to be HCl poisoning. Measuring the pH and concentrations of various ions in body fluids and contents of the alimentary tract enabled postmortem diffusion of HCl to be determined.

  15. Hydrochloric acid aerosol and gaseous hydrogen chloride partitioning in a cloud contaminated by solid rocket exhaust

    NASA Technical Reports Server (NTRS)

    Sebacher, D. I.; Bendura, R. J.; Wornom, D. E.

    1980-01-01

    Partitioning of hydrogen chloride between hydrochloric acid aerosol and gaseous HCl in the lower atmosphere was experimentally investigated in a solid rocket exhaust cloud diluted with humid ambient air. Airborne measurements were obtained of gaseous HCl, total HCl, relative humidity and temperature to evaluate the conditions under which aerosol formation occurs in the troposphere in the presence of hygroscopic HCl vapor. Equilibrium predictions of HCl aerosol formation accurately predict the measured HCl partitioning over a range of total HCl concentrations from 0.6 to 16 ppm.

  16. Enzymatic hydrolysis of cellulose pretreated with zinc chloride and hydrochloric acid

    SciTech Connect

    Chen, L.F.; Gong, C.S.

    1982-01-01

    Microcrystalline cellulose, Avicel, was dissolved in a concentrated solution of ZnCl/sub 2/ and 0.5% hydrochloric acid followed by heating at 145/sup 0/C for 6 min. after cooling, cellulose in its amorphous form was precipitated by the addition of acetone. The resulting cellulose was hydrolyzed by cellulase derived from Trichoderma viride. At concentrations of 20% cellulose and 1% cellulase, cellulose was hydrolyzed completely for form a solution of 19% glucose and 1% cellobiose within 72 h of incubation. 1 figure, 5 tables.

  17. Effect of molecular structure of aniline-formaldehyde copolymers on corrosion inhibition of mild steel in hydrochloric acid solution.

    PubMed

    Zhang, Yan; Nie, Mengyan; Wang, Xiutong; Zhu, Yukun; Shi, Fuhua; Yu, Jianqiang; Hou, Baorong

    2015-05-30

    Aniline-formaldehyde copolymers with different molecular structures have been prepared and investigated for the purpose of corrosion control of mild steel in hydrochloric acid. The copolymers were synthesized by a condensation polymerization process with different ratios of aniline to formaldehyde in acidic precursor solutions. The corrosion inhibition efficiency of as-synthesized copolymers for Q235 mild steel was investigated in 1.0 mol L(-1) hydrochloric acid solution by weight loss measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy, respectively. All the results demonstrate that as-prepared aniline-formaldehyde copolymers are efficient mixed-type corrosion inhibitors for mild steels in hydrochloric acid. The corrosion inhibition mechanism is discussed in terms of the role of molecular structure on adsorption of the copolymers onto the steel surface in acid solution.

  18. Microarray-based transcriptome of Listeria monocytogenes adapted to sublethal concentrations of acetic acid, lactic acid, and hydrochloric acid.

    PubMed

    Tessema, Girum Tadesse; Møretrø, Trond; Snipen, Lars; Heir, Even; Holck, Askild; Naterstad, Kristine; Axelsson, Lars

    2012-09-01

    Listeria monocytogenes , an important foodborne pathogen, commonly encounters organic acids in food-related environments. The transcriptome of L. monocytogenes L502 was analyzed after adaptation to pH 5 in the presence of acetic acid, lactic acid, or hydrochloric acid (HCl) at 25 °C, representing a condition encountered in mildly acidic ready-to-eat food kept at room temperature. The acid-treated cells were compared with a reference culture with a pH of 6.7 at the time of RNA harvesting. The number of genes and magnitude of transcriptional responses were higher for the organic acids than for HCl. Protein coding genes described for low pH stress, energy transport and metabolism, virulence determinates, and acid tolerance response were commonly regulated in the 3 acid-stressed cultures. Interestingly, the transcriptional levels of histidine and cell wall biosynthetic operons were upregulated, indicating possible universal response against low pH stress in L. monocytogenes. The opuCABCD operon, coding proteins for compatible solutes transport, and the transcriptional regulator sigL were significantly induced in the organic acids, strongly suggesting key roles during organic acid stress. The present study revealed the complex transcriptional responses of L. monocytogenes towards food-related acidulants and opens the roadmap for more specific and in-depth future studies.

  19. Kinetic Aspects of Leaching Zinc from Waste Galvanizing Zinc by Using Hydrochloric Acid Solutions

    NASA Astrophysics Data System (ADS)

    Sminčáková, Emília; Trpčevská, Jarmila; Pirošková, Jana

    2016-10-01

    In this work, the results of acid leaching of flux skimmings coming from two plants are presented. Sample A contained two phases, Zn(OH)Cl and NH4Cl. In sample B, the presence of three phases, Zn5(OH)8Cl2·H2O, (NH4)2(ZnCl4) and ZnCl2(NH3)2, was proved. The aqueous solution of hydrochloric acid and distilled water was used as the leaching medium. The effects of the leaching time, temperature and concentration of the leaching medium on the zinc extraction were investigated. The apparent activation energy, E a = 4.61 kJ mol-1, and apparent reaction order n = 0.18 for sample A, and the values E a = 6.28 kJ mol-1 and n = 0.33 for sample B were experimentally determined. Zinc leaching in acid medium is a diffusion-controlled process.

  20. The Comparison of Hydrochloric Acid and Phosphoric Acid Treatments in the Preparation of Montmorillonite Catalysts for RNA Synthesis.

    PubMed

    Aldersley, Michael Frank; Joshi, Prakash C; Huang, Yixing

    2017-02-16

    The treatment of clay minerals with a preliminary acid wash and titration to pH 7 has proven to generate catalysts for the most interesting of oligomerization reactions in which activated RNA-nucleotides generate oligomers up to 40-mers. Significantly, not all clay minerals become catalytic following this treatment and none are catalytic in the absence of such treatment. The washing procedure has been modified and explored further using phosphoric acid and the outcomes are compared to those obtained when clay samples are prepared following a hydrochloric acid wash.

  1. The Comparison of Hydrochloric Acid and Phosphoric Acid Treatments in the Preparation of Montmorillonite Catalysts for RNA Synthesis

    NASA Astrophysics Data System (ADS)

    Aldersley, Michael Frank; Joshi, Prakash C.; Huang, Yixing

    2017-02-01

    The treatment of clay minerals with a preliminary acid wash and titration to pH 7 has proven to generate catalysts for the most interesting of oligomerization reactions in which activated RNA-nucleotides generate oligomers up to 40-mers. Significantly, not all clay minerals become catalytic following this treatment and none are catalytic in the absence of such treatment. The washing procedure has been modified and explored further using phosphoric acid and the outcomes are compared to those obtained when clay samples are prepared following a hydrochloric acid wash.

  2. [Newly leaching method of copper from waste print circuit board using hydrochloric acid/n-butylamine/copper sulfate].

    PubMed

    Wang, Hong-Yan; Cui, Zhao-Jie; Yao, Ya-Wei

    2010-12-01

    A newly leaching method of copper from waste print circuit board was established by using hydrochloric acid-n-butylamine-copper sulfate mixed solution. The conditions of leaching were optimized by changing the hydrochloric acid, n-butylamine, copper sulfate,temperature and other conditions using copper as target mimics. The results indicated that copper could be leached completely after 8 h at 50 degrees C, hydrochloric acid concentration of 1.75 mol/L, n-butylamine concentration of 0.25 mol/L, and copper sulfate mass of 0.96 g. Under the conditions, copper leaching rates in waste print circuit board samples was up to 95.31% after 9 h. It has many advantages such as better effects, low cost, mild reaction conditions, leaching solution recycling.

  3. The criteria of critical runaway and stable temperatures of catalytic decomposition of hydrogen peroxide in the presence of hydrochloric acid.

    PubMed

    Lu, Kai-Tai; Yang, Ching-Chyuan; Lin, Peng-Chu

    2006-07-31

    The hydrogen peroxide and hydrochloric acid are used in close proximity in the computer chip manufacture. The hydrochloric acid catalyzes an exothermic decomposition of hydrogen peroxide into oxygen and water. The accumulation of heat and non-condensable gas increases temperature and pressure in this reaction process always lead to runaway reaction and accident owing to inadvertent mixing. Thus, the chemical reaction hazard has to be clearly identified. Its critical runaway temperatures and unstable reaction criteria in this reaction process have to be determined urgently. In this investigation, we estimated its kinetic parameters at various volumetric ratios of the hydrogen peroxide to hydrochloric acid. Then, used these kinetic parameters to evaluate their critical temperatures and stable criteria in each reaction processes. The analytic results are important and useful for the design of safety system in the computer chip manufacture.

  4. Integrated Computational and Experimental Protocol for Understanding Rh(III) Speciation in Hydrochloric and Nitric Acid Solutions

    SciTech Connect

    Samuels, Alex C.; Boele, Cherilynn A.; Bennett, Kevin T.; Clark, Sue B.; Wall, Nathalie; Clark, Aurora E.

    2014-12-01

    A combined experimental and theoretical approach has investigated the complex speciation of Rh(III) in hydrochloric and nitric acid media, as a function of acid concentration. This has relevance to the separation and isolation of Rh(III) from dissolved spent nuclear fuel, which is an emergent and attractive alternative source of platinum group metals, relative to traditional mining efforts.

  5. Luminal hydrochloric acid stimulates rapid transepithelial ion fluxes in rodent esophageal stratified squamous epithelium.

    PubMed

    Lin, B R; Hsieh, H T; Lee, J M; Lai, I R; Chen, C F; Yu, L C H

    2008-09-01

    It remains unclear whether enhanced ion fluxes occur in the esophageal stratified squamous epithelium upon acid exposure. Rat esophageal tissues devoid of submucosal glands displayed basal short-circuit current (Isc) of 5.03 +/- 1.93 microA/cm(2) and lumen-negative potential difference (PD) in association with net absorption of Na+ and Cl-, and secretion of HCO3(-). Luminal hydrochloric acid (HCl) challenge (pH = 1.6) triggered an acute rise of the Isc and increment of negative PD to seven-fold of baseline, which was diminished in HCO3(-)-free, but not Na+- free buffer. The rise of Isc was inhibited by pretreatment with di-isothiocyanatostilbene-2, 2'-disulphonic acid (DIDS) and 5-(N-ethyl-N-isopropyl)-amiloride (EIPA). Topical carbachol, capsaicin, forskolin or CFTR(inh)-172 had no effect on basal Isc.CFTR(inh)-172 did not reduce the acid-increased Isc. Functional ablation of capsaicin-sensitive nerves had no effect on the acid-induced Isc. The phenomenon of enhanced ion fluxes upon acid stimulation was confirmed in human esophageal specimens. Our results demonstrated that the mechanism of acid-induced rapid transepithelial ion fluxes is dependent on the presence of bicarbonate ions as well as functional anion transporters and Na+/H+ exchanger, but independent of cystic fibrosis transmembrane conductance regulator (CFTR). The capsaicin-sensitive and muscarinic-dependent nerve pathways did not play roles in the mechanism.

  6. EDTA and hydrochloric acid effects on mercury accumulation by Lupinus albus.

    PubMed

    Rodríguez, Luis; Alonso-Azcárate, Jacinto; Villaseñor, José; Rodríguez-Castellanos, Laura

    2016-12-01

    The efficiency of white lupine (Lupinus albus) to uptake and accumulate mercury from a soil polluted by mining activities was assessed in a pot experiment with chemically assisted phytoextraction. The mobilizing agents tested were ethylenediaminetetracetic acid (EDTA) and hydrochloric acid (HCl). Two doses of each amendment were used (0.5 and 1.0 g of amendment per kg of soil), and unamended pots were used as a control. Addition of HCl to the soil did not negatively affect plant biomass, while the use of EDTA led to a significant decrease in plant growth when compared to that found for non-treated pots, with plants visually showing symptoms of toxicity. The addition of hydrochloric acid increased root, shoot and total plant Hg uptake of white lupine by 3.7 times, 3.1 times and 3.5 times, respectively, in relation to non-amended plants. The greatest efficiency was obtained for the highest HCl dose. EDTA led to higher concentrations of total plant Hg than that found with the control, but, due to the aforementioned decrease in plant biomass, the Hg phytoextraction yield was not significantly increased. These results were attributed to the capability of both amendments to form stable Hg complexes. The concentration of Hg in the water of the soil pores after the phytoextraction experiment was very low for all treatments, showing that risks derived from metal leaching could be partially avoided by using doses and chemicals suitable to the concentration of metal in the soil and plant performance.

  7. Comparison of sulfuric and hydrochloric acids as catalysts in hydrolysis of Kappaphycus alvarezii (cottonii).

    PubMed

    Meinita, Maria Dyah Nur; Hong, Yong-Ki; Jeong, Gwi-Taek

    2012-01-01

    In this study, hydrolysis of marine algal biomass Kappaphhycus alvarezii using two different acid catalysts was examined with the goal of identifying optimal reaction conditions for the formation of sugars and by-products. K. alvarezii were hydrolyzed by autoclave using sulfuric acid or hydrochloric acid as catalyst with different acid concentrations (0.1-1.0 M), substrate concentrations (1.0-13.5%), hydrolysis time (10-90 min) and hydrolysis temperatures (100-130 (°)C). A difference in galactose, glucose, reducing sugar and total sugar content was observed under the different hydrolysis conditions. Different by-product compounds such as 5-hydroxymethylfurfural and levulinic acid were also observed under the different reaction conditions. The optimal conditions for hydrolysis were achieved at a sulfuric acid concentration, temperature and reaction time of 0.2 M, 130 °C and 15 min, respectively. These results may provide useful information for the development of more efficient systems for biofuel production from marine biomass.

  8. Effect of particle size in a limestone-hydrochloric acid reaction system.

    PubMed

    Sun, Bo; Zhou, Qulan; Chen, Xi; Xu, Tongmo; Hui, Shien

    2010-07-15

    Experimental characterization of the wet flue gas desulfurization process is carried out using a model limestone-hydrochloric acid reaction system, with in-situ measurement of the dissolution rate and particle size distribution. The limestone source, initial particle size distribution, working temperature and pH value are varied in large ranges. The dissolution rate is found to be higher when the average particle size is smaller, the temperature is higher, or the pH is lower. An empirical equation is established to correlate the dissolution rate with the particle size and working conditions, which agrees well with measurements. The results may be useful for providing insights to improve the efficiency of the wet flue gas desulfurization process, as well as other solid particle-liquid solution reactions.

  9. Kinetic modeling of hardwood prehydrolysis. Part II. Xylan removal by dilute hydrochloric acid prehydrolysis

    SciTech Connect

    Connor, A.H.; Libkie, K.; Springer, E.L.

    1986-06-01

    A study was made of the kinetics of xylan hemicellulose removal with 0.10 M HCl at 120 degrees C from quaking aspen (Populus tremuloides), paper birch (Betula papyrifera), American elm (Ulmus americana), red maple (Acer rubrum), and southern red oak (Quercus falcata). The mathematical model developed in Part I to describe the kinetics of xylan removal by water prehydrolysis of these species could be used to model xylan removal with dilute hydrochloric acid. Xylan removal could thus be modelled as the sum of two parallel first-order reactions - one fast and one slow. However, unlike the case with water prehydrolysis where the rate constants for the fast and slow reaction processes could be correlated with each other, they could not be correlated for HCl prehydrolysis. Instead, these constant values determined for each species clustered about average values for all the species as a whole. A single set of parameters determined from a nonlinear least squares fit of the experimental prehydrolysis data for all the species as a whole to the model could be used to describe the course of xylan removal from all the species. The fact that one set of parameters could be used suggests that the same reactions are taking place on prehydrolysis and the chemical structure and physical morphology of the xylan hemicellulose were essentially the same in the species studied and probably in all temperate hardwood species. The model thus provides a good approximation of xylan removal from any temperate hardwood with dilute hydrochloric acid at the reaction conditions studied. 20 references.

  10. Effect of hypertonic saline treatment on the inflammatory response after hydrochloric acid-induced lung injury in pigs

    PubMed Central

    Holms, Carla Augusto; Otsuki, Denise Aya; Kahvegian, Marcia; Massoco, Cristina Oliveira; Fantoni, Denise Tabacchi; Gutierrez, Paulo Sampaio; Junior, Jose Otavio Costa Auler

    2015-01-01

    OBJECTIVES: Hypertonic saline has been proposed to modulate the inflammatory cascade in certain experimental conditions, including pulmonary inflammation caused by inhaled gastric contents. The present study aimed to assess the potential anti-inflammatory effects of administering a single intravenous dose of 7.5% hypertonic saline in an experimental model of acute lung injury induced by hydrochloric acid. METHODS: Thirty-two pigs were anesthetized and randomly allocated into the following four groups: Sham, which received anesthesia and were observed; HS, which received intravenous 7.5% hypertonic saline solution (4 ml/kg); acute lung injury, which were subjected to acute lung injury with intratracheal hydrochloric acid; and acute lung injury + hypertonic saline, which were subjected to acute lung injury with hydrochloric acid and treated with hypertonic saline. Hemodynamic and ventilatory parameters were recorded over four hours. Subsequently, bronchoalveolar lavage samples were collected at the end of the observation period to measure cytokine levels using an oxidative burst analysis, and lung tissue was collected for a histological analysis. RESULTS: Hydrochloric acid instillation caused marked changes in respiratory mechanics as well as blood gas and lung parenchyma parameters. Despite the absence of a significant difference between the acute lung injury and acute lung injury + hypertonic saline groups, the acute lung injury animals presented higher neutrophil and tumor necrosis factor alpha (TNF-α), interleukin (IL)-6 and IL-8 levels in the bronchoalveolar lavage analysis. The histopathological analysis revealed pulmonary edema, congestion and alveolar collapse in both groups; however, the differences between groups were not significant. Despite the lower cytokine and neutrophil levels observed in the acute lung injury + hypertonic saline group, significant differences were not observed among the treated and non-treated groups. CONCLUSIONS: Hypertonic saline

  11. Enhanced blood compatibility of metallocene polyethylene subjected to hydrochloric acid treatment for cardiovascular implants.

    PubMed

    Jaganathan, Saravana Kumar; Mohandas, Hemanth; Sivakumar, Gunalan; Kasi, Palaniappan; Sudheer, Theertha; Avineri Veetil, Sruthi; Murugesan, Selvakumar; Supriyanto, Eko

    2014-01-01

    Blood compatibility of metallocene polyethylene (mPE) was investigated after modifying the surface using hydrochloric acid. Contact angle of the mPE exposed to HCl poses a decrease in its value which indicates increasing wettability and better blood compatibility. Surface of mPE analyzed by using FTIR revealed no significant changes in its functional groups after treatment. Furthermore, scanning electron microscope images supported the increasing wettability through the modifications like pit formations and etching on the acid rendered surface. To evaluate the effect of acid treatment on the coagulation cascade, prothrombin time (PT) and activated partial thromboplastin time (APTT) were measured. Both PT and APTT were delayed significantly (P < 0.05) after 60 min exposure implying improved blood compatibility of the surfaces. Hemolysis assay of the treated surface showed a remarkable decrease in the percentage of lysis of red blood cells when compared with untreated surface. Moreover, platelet adhesion assay demonstrated that HCl exposed surfaces deter the attachment of platelets and thereby reduce the chances of activation of blood coagulation cascade. These results confirmed the enhanced blood compatibility of mPE after HCl exposure which can be utilized for cardiovascular implants like artificial vascular prostheses, implants, and various blood contacting devices.

  12. Empirical Modeling of Iron Oxide Dissolution in Sulphuric and Hydrochloric Acid

    NASA Astrophysics Data System (ADS)

    Hemmelmann, Jan C.; Xu, Hao; Krumm, Wolfgang

    2013-10-01

    A new approach is presented to an empirical modeling of chemical pickling processes, based on the activation energy of oxide dissolution in hydrochloric acid (HCl) and sulfuric acid (H2SO4). The model allows us to calculate pickling times as a function of definite parameters. The main oxide layers on hot-rolled materials are magnetite (Fe3O4), hematite (Fe2O3), and wustite (FeO). On the laboratory scale, the activation energy of each oxide has been determined. FeO is a metastable oxide and has been produced based on magnetite powder in a H2/H2O atmosphere. The oxide powders used for the experimental procedure have been analyzed by X-ray powder diffraction to insure the proper stoichiometry and composition. The model allows us to calculate the time of oxide dissolution based on the parameters temperature, acid concentration, and the composition of the oxide layer. Calculated values are verified by surface potential measurement on industrial oxide layers. The hot-rolled material used for verification is low carbon steel. A comparison between calculated pickling times and experimental data will be presented.

  13. A simple procedure for preparing chitin oligomers through acetone precipitation after hydrolysis in concentrated hydrochloric acid.

    PubMed

    Kazami, Nao; Sakaguchi, Masayoshi; Mizutani, Daisuke; Masuda, Tatsuhiko; Wakita, Satoshi; Oyama, Fumitaka; Kawakita, Masao; Sugahara, Yasusato

    2015-11-05

    Chitin oligomers are of interest because of their numerous biologically relevant properties. To prepare chitin oligomers containing 4-6 GlcNAc units [(GlcNAc)4-6], α- and β-chitin were hydrolyzed with concentrated hydrochloric acid at 40 °C. The reactant was mixed with acetone to recover the acetone-insoluble material, and (GlcNAc)4-6 was efficiently recovered after subsequent water extraction. Composition analysis using gel permeation chromatography and MALDI-TOF mass spectrometry indicated that (GlcNAc)4-6 could be isolated from the acetone-insoluble material with recoveries of approximately 17% and 21% from the starting α-chitin and β-chitin, respectively. The acetone precipitation method is highly useful for recovering chitin oligomers from the acid hydrolysate of chitin. The changes in the molecular size and higher-order structure of chitin during the course of hydrolysis were also analyzed, and a model that explains the process of oligomer accumulation is proposed.

  14. Highly improved synthesis of gold nanobipyramids by tuning the concentration of hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Qi, Ying; Zhu, Jian; Li, Jianjun; Zhao, Junwu

    2016-07-01

    Fabrication of gold nanobipyramids (Au BPs) has attracted great attention because they exhibit more advantageous plasmonic properties. In this study, Au BPs were synthesized by the well-known seeded growth in the presence of hydrochloric acid (HCl). The effects of the ingredients, including HCl, silver nitrate (AgNO3), l-Ascorbic acid (AA), and seeds on the structure and yield of the Au BPs were systemically investigated. The results showed that the abundant HCl could improve the yield of Au BPs and decrease the longitudinal surface plasmon resonance wavelength. Under the circumstance of higher concentration of AA and AgNO3, more byproducts were resulted. In addition, the effect of HCl under different ratios of seed solution to AA has also been studied. The results showed that the yield was less sensitive to HCl when the amount of seed solution was small. If substantial AA was added to the system, then abundant HCl should be introduced correspondingly to improve the yield of Au BPs.

  15. Surface chemical compositions and dispersity of starch nanocrystals formed by sulfuric and hydrochloric acid hydrolysis.

    PubMed

    Wei, Benxi; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2014-01-01

    Surface chemical compositions of starch nanocrystals (SNC) prepared using sulfuric acid (H2SO4) and hydrochloric acid (HCl) hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS) and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were -23.1 and -5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to -32.3 and -10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to -24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample.

  16. Preparation of Rutile from Ilmenite Concentrate Through Pressure Leaching with Hydrochloric Acid

    NASA Astrophysics Data System (ADS)

    Xiang, Junyi; Liu, Songli; Lv, Xuewei; Bai, Chenguang

    2017-04-01

    Take into account the fact that the natural rutile utilized for the production of titanium dioxide pigment through chloride process is desperately lacking worldwide especially in China, an attempt was exploited for extracting synthetic rutile from Yunnan ilmenite concentrate with hydrochloric acid pressure leaching process. The leaching parameters for one step leaching process were investigated. The results shown that the optimum condition is leaching temperature of 413 K (140 °C), acid concentration of 20 pct HCl, leaching time of 4 hours and liquid/solid mass ratio of 8:1. A two steps leaching process was also suggested to reutilize the leaching liquor which with a high content of HCl. The results showed that the content of HCl decreased from 135 to 75 g/L, total iron increased from 44.5 g/L to about 87.6 g/L, and the liquid/solid mass ratio decreased to 5:1 with a two steps leaching process. The leaching product produced through a two steps leaching process shows a pure golden red with a high content of titanium (92.65 pct TiO2), a relatively low content of calcium (0.10 pct CaO) and magnesium (0.12 pct MgO), but high content of silicon (5.72 pct SiO2).

  17. Preparation of Rutile from Ilmenite Concentrate Through Pressure Leaching with Hydrochloric Acid

    NASA Astrophysics Data System (ADS)

    Xiang, Junyi; Liu, Songli; Lv, Xuewei; Bai, Chenguang

    2016-12-01

    Take into account the fact that the natural rutile utilized for the production of titanium dioxide pigment through chloride process is desperately lacking worldwide especially in China, an attempt was exploited for extracting synthetic rutile from Yunnan ilmenite concentrate with hydrochloric acid pressure leaching process. The leaching parameters for one step leaching process were investigated. The results shown that the optimum condition is leaching temperature of 413 K (140 °C), acid concentration of 20 pct HCl, leaching time of 4 hours and liquid/solid mass ratio of 8:1. A two steps leaching process was also suggested to reutilize the leaching liquor which with a high content of HCl. The results showed that the content of HCl decreased from 135 to 75 g/L, total iron increased from 44.5 g/L to about 87.6 g/L, and the liquid/solid mass ratio decreased to 5:1 with a two steps leaching process. The leaching product produced through a two steps leaching process shows a pure golden red with a high content of titanium (92.65 pct TiO2), a relatively low content of calcium (0.10 pct CaO) and magnesium (0.12 pct MgO), but high content of silicon (5.72 pct SiO2).

  18. Impact of α-amylase combined with hydrochloric acid hydrolysis on structure and digestion of waxy rice starch.

    PubMed

    Li, Hongyan; Zhu, Yanqiao; Jiao, Aiquan; Zhao, Jianwei; Chen, Xiaoming; Wei, Benxi; Hu, Xiuting; Wu, Chunsen; Jin, Zhengyu; Tian, Yaoqi

    2013-04-01

    The structure and in vitro digestibility of native waxy rice starch by the combined hydrolysis of α-amylase and hydrochloric acid were investigated in this study. The combined hydrolysis technique generated higher hydrolysis rate and extent than the enzymatic hydrolysis. The granular appearance and chromatograph profile demonstrated that α-amylase and hydrochloric acid exhibited different patterns of hydrolysis. The rise in the ratio of absorbance 1047/1022cm(-1), the melting temperature range (Tc-To), and the melting enthalpy (ΔH) were observed during the combined hydrolysis. These results suggest that α-amylase simultaneously cleaves the amorphous and crystalline regions, whereas the amorphous regions of starch granules are preferentially hydrolyzed during the acid hydrolysis. Furthermore, the combined hydrolysis increased rapidly digestible starch (RDS) while decreased slowly digestible starch (SDS) and resistant starch (RS), indicating that the hydrolysis mode affected the digestion property of native waxy rice starch.

  19. Heavy metal removal from sewage sludge ash by thermochemical treatment with gaseous hydrochloric acid.

    PubMed

    Vogel, Christian; Adam, Christian

    2011-09-01

    Sewage sludge ash (SSA) is a suitable raw material for fertilizers due to its high phosphorus (P) content. However, heavy metals must be removed before agricultural application and P should be transferred into a bioavailable form. The utilization of gaseous hydrochloric acid for thermochemical heavy metal removal from SSA at approximately 1000 °C was investigated and compared to the utilization of alkaline earth metal chlorides. The heavy metal removal efficiency increased as expected with higher gas concentration, longer retention time and higher temperature. Equivalent heavy metal removal efficiency were achieved with these different Cl-donors under comparable conditions (150 g Cl/kg SSA, 1000 °C). In contrast, the bioavailability of the P-bearing compounds present in the SSA after thermal treatment with gaseous HCl was not as good as the bioavailability of the P-bearing compounds formed by the utilization of magnesium chloride. This disadvantage was overcome by mixing MgCO(3) as an Mg-donor to the SSA before thermochemical treatment with the gaseous Cl-donor. A test series under systematic variation of the operational parameters showed that copper removal is more depending on the retention time than the removal of zinc. Zn-removal was declined by a decreasing ratio of the partial pressures of ZnCl(2) and water.

  20. Effect of foods and drinks on primary tooth enamel after erosive challenge with hydrochloric acid.

    PubMed

    Mesquita-Guimarães, Késsia Suênia Fidelis de; Scatena, Camila; Borsatto, Maria Cristina; Rodrigues-Júnior, Antonio Luiz; Serra, Mônica Campos

    2015-01-01

    The aim of this study was to evaluate the effect of industrialised foods and drinks on primary tooth enamel previously eroded with hydrochloric acid (HCl). The crowns of one hundred two specimens were subjected to an erosive challenge with HCl and randomly divided into six groups (n = 17): Chocolate Milk (Toddynho® - Pepsico) - negative control; Petit Suisse Yogurt (Danoninho® - Danone); Strawberry Yogurt (Vigor); Apple puree (Nestlé); Fermented Milk (Yakult® - Yakult); and Home Squeezed Style Orange Juice (del Valle) - positive control. The 28-day immersion cycles for the test products were performed twice daily and were interspersed with exposure of the test substrate to artificial saliva. Measurements of enamel surface microhardness (SMH) were performed initially, after immersion in HCl and at 7, 14, 21 and 28 days of experimentation. A two-way ANOVA, according to a split-plot design, followed by the sum of squares decomposition and Tukey's test, revealed a significant effect for the interaction between Foods and Drinks and Length of Exposure (p < 0.00001). Orange juice resulted in greater mineral loss of enamel after 28 days. None of the test products was associated with recovery of tooth enamel microhardness.

  1. Establishment of hydrochloric acid/lipopolysaccharide-induced pelvic inflammatory disease model.

    PubMed

    Oh, Yeonsu; Lee, Jaehun; Kim, Hyeon-Cheol; Hahn, Tae-Wook; Yoon, Byung-Il; Han, Jeong-Hee; Kwon, Yong-Soo; Park, Joung Jun; Koo, Deog-Bon; Rhee, Ki-Jong; Jung, Bae Dong

    2016-09-30

    Pelvic inflammatory disease (PID), which is one of the most problematic complications experienced by women with sexually transmitted diseases, frequently causes secondary infections after reproductive abnormalities in veterinary animals. Although the uterus is self-protective, it becomes fragile during periods or pregnancy. To investigate PID, bacteria or lipopolysaccharide (LPS) extracted from gram negative bacteria has been used to induce the disease in several animal models. However, when LPS is applied to the peritoneum, it often causes systemic sepsis leading to death and the PID was not consistently demonstrated. Hydrochloric acid (HCl) has been used to induce inflammation in the lungs and stomach but not tested for reproductive organs. In this study, we developed a PID model in mice by HCl and LPS sequential intracervical (i.c.) administration. The proinflammatory cytokines, interleukin (IL)-1β, IL-6 and tumor necrosis factor-α, were detected in the mouse uterus by western blot analysis and cytokine enzyme-linked immunosorbent assay after HCl (25 mg/kg) administration i.c. followed by four LPS (50 mg/kg) treatments. Moreover, mice exhibited increased infiltration of neutrophils in the endometrium and epithelial layer. These results suggest that ic co-administration of HCl and LPS induces PID in mice. This new model may provide a consistent and reproducible PID model for future research.

  2. Removing hydrochloric acid exhaust products from high performance solid rocket propellant using aluminum-lithium alloy.

    PubMed

    Terry, Brandon C; Sippel, Travis R; Pfeil, Mark A; Gunduz, I Emre; Son, Steven F

    2016-11-05

    Hydrochloric acid (HCl) pollution from perchlorate based propellants is well known for both launch site contamination, as well as the possible ozone layer depletion effects. Past efforts in developing environmentally cleaner solid propellants by scavenging the chlorine ion have focused on replacing a portion of the chorine-containing oxidant (i.e., ammonium perchlorate) with an alkali metal nitrate. The alkali metal (e.g., Li or Na) in the nitrate reacts with the chlorine ion to form an alkali metal chloride (i.e., a salt instead of HCl). While this technique can potentially reduce HCl formation, it also results in reduced ideal specific impulse (ISP). Here, we show using thermochemical calculations that using aluminum-lithium (Al-Li) alloy can reduce HCl formation by more than 95% (with lithium contents ≥15 mass%) and increase the ideal ISP by ∼7s compared to neat aluminum (using 80/20 mass% Al-Li alloy). Two solid propellants were formulated using 80/20 Al-Li alloy or neat aluminum as fuel additives. The halide scavenging effect of Al-Li propellants was verified using wet bomb combustion experiments (75.5±4.8% reduction in pH, ∝ [HCl], when compared to neat aluminum). Additionally, no measurable HCl evolution was detected using differential scanning calorimetry coupled with thermogravimetric analysis, mass spectrometry, and Fourier transform infrared absorption.

  3. Copper-promoted cementation of antimony in hydrochloric acid system: A green protocol.

    PubMed

    Wu, Lian-Kui; Li, Ying-Ying; Cao, Hua-Zhen; Zheng, Guo-Qu

    2015-12-15

    A new method of recovering antimony in hydrochloric acid system by cementation with copper powder was proposed and carried out at laboratory scale. Thermodynamic analysis and cyclic voltammetry test were conducted to study the cementation process. This is a novel antimony removal technology and quite meets the requirements of green chemistry. The main cement product Cu2Sb is a promising anodic material for lithium and sodium ion battery. And nearly all consumed copper powder are transformed into CuCl which is an important industrial material. The effect of reaction temperature, stoichiometric ratio of Cu to Sb(III), stirring rate and concentration of HCl on the cementation efficiency of antimony were investigated in detail. Optimized cementation condition is obtained at 60 °C for 120 min and stirring rate of 600 rpm with Cu/Sb(III) stoichiometric ratio of 6 in 3 mol L(-1) HCl. At this time, nearly all antimony can be removed by copper powder and the cementation efficiency is over 99%. The structure and morphologies of the cement products were characterized by X-ray diffraction and scanning electron microscopy, respectively. Results show that the reaction temperature has little influence on the morphology of the cement products which consist of particles with various sizes. The activation energy of the cementation antimony on copper is 37.75 kJ mol(-1), indicating a chemically controlled step. Inductively coupled plasma mass spectrometry results show that no stibine generates during the cementation process.

  4. Direct anodic hydrochloric acid and cathodic caustic production during water electrolysis

    NASA Astrophysics Data System (ADS)

    Lin, Hui-Wen; Cejudo-Marín, Rocío; Jeremiasse, Adriaan W.; Rabaey, Korneel; Yuan, Zhiguo; Pikaar, Ilje

    2016-02-01

    Hydrochloric acid (HCl) and caustic (NaOH) are among the most widely used chemicals by the water industry. Direct anodic electrochemical HCl production by water electrolysis has not been successful as current commercially available electrodes are prone to chlorine formation. This study presents an innovative technology simultaneously generating HCl and NaOH from NaCl using a Mn0.84Mo0.16O2.23 oxygen evolution electrode during water electrolysis. The results showed that protons could be anodically generated at a high Coulombic efficiency (i.e. ≥ 95%) with chlorine formation accounting for 3 ~ 5% of the charge supplied. HCl was anodically produced at moderate strengths at a CE of 65 ± 4% together with a CE of 89 ± 1% for cathodic caustic production. The reduction in CE for HCl generation was caused by proton cross-over from the anode to the middle compartment. Overall, this study showed the potential of simultaneous HCl and NaOH generation from NaCl and represents a major step forward for the water industry towards on-site production of HCl and NaOH. In this study, artificial brine was used as a source of sodium and chloride ions. In theory, artificial brine could be replaced by saline waste streams such as Reverse Osmosis Concentrate (ROC), turning ROC into a valuable resource.

  5. Establishment of hydrochloric acid/lipopolysaccharide-induced pelvic inflammatory disease model

    PubMed Central

    Oh, Yeonsu; Lee, Jaehun; Kim, Hyeon-Cheol; Hahn, Tae-Wook; Yoon, Byung-Il; Han, Jeong-Hee; Kwon, Yong-Soo; Park, Joung Jun; Koo, Deog-Bon; Rhee, Ki-Jong

    2016-01-01

    Pelvic inflammatory disease (PID), which is one of the most problematic complications experienced by women with sexually transmitted diseases, frequently causes secondary infections after reproductive abnormalities in veterinary animals. Although the uterus is self-protective, it becomes fragile during periods or pregnancy. To investigate PID, bacteria or lipopolysaccharide (LPS) extracted from gram negative bacteria has been used to induce the disease in several animal models. However, when LPS is applied to the peritoneum, it often causes systemic sepsis leading to death and the PID was not consistently demonstrated. Hydrochloric acid (HCl) has been used to induce inflammation in the lungs and stomach but not tested for reproductive organs. In this study, we developed a PID model in mice by HCl and LPS sequential intracervical (i.c.) administration. The proinflammatory cytokines, interleukin (IL)-1β, IL-6 and tumor necrosis factor-α, were detected in the mouse uterus by western blot analysis and cytokine enzyme-linked immunosorbent assay after HCl (25 mg/kg) administration i.c. followed by four LPS (50 mg/kg) treatments. Moreover, mice exhibited increased infiltration of neutrophils in the endometrium and epithelial layer. These results suggest that ic co-administration of HCl and LPS induces PID in mice. This new model may provide a consistent and reproducible PID model for future research. PMID:26726020

  6. Dissolution Process of Palladium in Hydrochloric Acid: A Route via Alkali Metal Palladates

    NASA Astrophysics Data System (ADS)

    Kasuya, Ryo; Miki, Takeshi; Morikawa, Hisashi; Tai, Yutaka

    2015-12-01

    To improve the safety of the Pd recovery processes that use toxic oxidizers, dissolution of Pd in hydrochloric acid with alkali metal palladates was investigated. Alkali metal palladates were prepared by calcining a mixture of Pd black and alkali metal (Li, Na, and K) carbonates in air. Almost the entire amount of Pd was converted into Li2PdO2 after calcination at 1073 K (800 °C) using Li2CO3. In contrast, PdO was obtained by calcination at 1073 K (800 °C) using Na and K carbonates. Our results indicated that Li2CO3 is the most active reagent among the examined alkali metal carbonates for the formation of palladates. In addition, dissolution of the resulting Li2PdO2 in HCl solutions was evaluated under various conditions. In particular, Li2PdO2 rapidly dissolved in diluted (0.1 M) HCl at ambient temperature. Solubility of Pd of Li2PdO2 was found to be 99 pct or larger after dissolution treatment at 353 K (80 °C) for 5 minutes; in contrast, PdO hardly dissolved in 0.1 M HCl. The dissolution mechanism of Li2PdO2 in HCl was also elucidated by analysis of crystal structures and particulate properties. Since our process is completely free from toxic oxidizers, the dissolution process via alkali metal palladates is much safer than currently employed methods.

  7. Direct anodic hydrochloric acid and cathodic caustic production during water electrolysis

    PubMed Central

    Lin, Hui-Wen; Cejudo-Marín, Rocío; Jeremiasse, Adriaan W.; Rabaey, Korneel; Yuan, Zhiguo; Pikaar, Ilje

    2016-01-01

    Hydrochloric acid (HCl) and caustic (NaOH) are among the most widely used chemicals by the water industry. Direct anodic electrochemical HCl production by water electrolysis has not been successful as current commercially available electrodes are prone to chlorine formation. This study presents an innovative technology simultaneously generating HCl and NaOH from NaCl using a Mn0.84Mo0.16O2.23 oxygen evolution electrode during water electrolysis. The results showed that protons could be anodically generated at a high Coulombic efficiency (i.e. ≥ 95%) with chlorine formation accounting for 3 ~ 5% of the charge supplied. HCl was anodically produced at moderate strengths at a CE of 65 ± 4% together with a CE of 89 ± 1% for cathodic caustic production. The reduction in CE for HCl generation was caused by proton cross-over from the anode to the middle compartment. Overall, this study showed the potential of simultaneous HCl and NaOH generation from NaCl and represents a major step forward for the water industry towards on-site production of HCl and NaOH. In this study, artificial brine was used as a source of sodium and chloride ions. In theory, artificial brine could be replaced by saline waste streams such as Reverse Osmosis Concentrate (ROC), turning ROC into a valuable resource. PMID:26848031

  8. Direct anodic hydrochloric acid and cathodic caustic production during water electrolysis.

    PubMed

    Lin, Hui-Wen; Cejudo-Marín, Rocío; Jeremiasse, Adriaan W; Rabaey, Korneel; Yuan, Zhiguo; Pikaar, Ilje

    2016-02-05

    Hydrochloric acid (HCl) and caustic (NaOH) are among the most widely used chemicals by the water industry. Direct anodic electrochemical HCl production by water electrolysis has not been successful as current commercially available electrodes are prone to chlorine formation. This study presents an innovative technology simultaneously generating HCl and NaOH from NaCl using a Mn0.84Mo0.16O2.23 oxygen evolution electrode during water electrolysis. The results showed that protons could be anodically generated at a high Coulombic efficiency (i.e. ≥ 95%) with chlorine formation accounting for 3 ~ 5% of the charge supplied. HCl was anodically produced at moderate strengths at a CE of 65 ± 4% together with a CE of 89 ± 1% for cathodic caustic production. The reduction in CE for HCl generation was caused by proton cross-over from the anode to the middle compartment. Overall, this study showed the potential of simultaneous HCl and NaOH generation from NaCl and represents a major step forward for the water industry towards on-site production of HCl and NaOH. In this study, artificial brine was used as a source of sodium and chloride ions. In theory, artificial brine could be replaced by saline waste streams such as Reverse Osmosis Concentrate (ROC), turning ROC into a valuable resource.

  9. Preserving ground water samples with hydrochloric acid does not result in the formation of chloroform

    USGS Publications Warehouse

    Squillace, Paul J.; Pankow, James F.; Barbash, Jack E.; Price, Curtis V.; Zogorski, John S.

    1999-01-01

    Water samples collected for the determination of volatile organic compounds (VOCs) are often preserved with hydrochloric acid (HCl) to inhibit the biotransformation of the analytes of interest until the chemical analyses can he performed. However, it is theoretically possible that residual free chlorine in the HCl can react with dissolved organic carbon (DOC) to form chloroform via the haloform reaction. Analyses of 1501 ground water samples preserved with HCl from the U.S. Geological Survey's National Water-Quality Assessment Program indicate that chloroform was the most commonly detected VOC among 60 VOCs monitored. The DOC concentrations were not significantly larger in samples with detectable chloroform than in those with no delectable chloroform, nor was there any correlation between the concentrations of chloroform and DOC. Furthermore, chloroform was detected more frequently in shallow ground water in urban areas (28.5% of the wells sampled) than in agricultural areas (1.6% of the wells sampled), which indicates that its detection was more related to urban land-use activities than to sample acidification. These data provide strong evidence that acidification with HCl does not lead to the production of significant amounts of chloroform in ground water samples. To verify these results, an acidification study was designed to measure the concentrations of all trihalomethanes (THMs) that can form as a result of HCl preservation in ground water samples and to determine if ascorbic acid (C6H8O6) could inhibit this reaction if it did occur. This study showed that no THMs were formed as a result of HCl acidification, and that ascorbic acid had no discernible effect on the concentrations of THMs measured.

  10. Praeruptorin D and E attenuate lipopolysaccharide/hydrochloric acid induced acute lung injury in mice.

    PubMed

    Yu, Peng-Jiu; Li, Jing-Rong; Zhu, Zheng-Guang; Kong, Huan-Yu; Jin, Hong; Zhang, Jun-Yan; Tian, Yuan-Xin; Li, Zhong-Huang; Wu, Xiao-Yun; Zhang, Jia-Jie; Wu, Shu-Guang

    2013-06-15

    Acute lung injury is a life-threatening syndrome characterized by overwhelming lung inflammation and increased microvascular permeability, which causes a high mortality rate worldwide. The dry root of Peucedanum praeruptorum Dunn has been long used to treat respiratory diseases in China. In the present study, Praeruptorin A, C, D and E (PA, PC, PD and PE), four pyranocoumarins extracted from this herb, have been investigated for the pharmacological effects in experimental lung injury mouse models. In lipopolysaccharide (LPS) challenged mice, PA and PC did not show protective effect against lung injury at the dose of 80 mg/kg. However, PD and PE significantly inhibited the infiltration of activated polymorphonuclear leukocytes (PMNs) and decreased the levels of TNF-α and IL-6 in bronchoalveolar lavage fluid at the same dose. There was no statistically significant difference between PD and PE group. Further study demonstrated that PD and PE suppressed protein extravasations in bronchoalveolar lavage fluid, attenuated myeloperoxidase (MPO) activity and the pathological changes in the lung. Both PD and PE suppressed LPS induced Nuclear Factor-kappa B (NF-κB) pathway activation in the lung by decreasing the cytoplasmic loss of Inhibitor κB-α (IκB-α) protein and inhibiting the translocation of p65 from cytoplasm to nucleus. We also extended our study to acid-induced acute lung injury and found that these two compounds protected mice from hydrochloric acid (HCl)-induced lung injury by inhibiting PMNs influx, IL-6 release and protein exudation. Taken together, these results suggested that PD and PE might be useful in the therapy of lung injury.

  11. Recovery of hydrochloric acid from the waste acid solution by diffusion dialysis.

    PubMed

    Xu, Jing; Lu, Shuguang; Fu, Dan

    2009-06-15

    Diffusion dialysis using a series of anion exchange membranes was employed to recover HCl acid from the waste acid solution. Effects of flow rate, flow rate ratio of water to feed, and Fe ion concentration on the recovery of HCl were investigated. It was found that the flow rate ratio was an important factor in the diffusion dialysis operation, and the recovered HCl concentration and Fe ion concentration in diffusate decreased significantly with the change of flow rate ratio from 0.4 to 1.7. In addition, the higher the Fe ion concentration in the feed, the higher the Fe leakage in the recovered acid solution. The HCl recovery efficiency was influenced not only by the recovered acid concentration, but also the outlet flow rate. While using the actual pot galvanizing waste HCl solution with the co-existence of 2.70 mol/L of Fe and 0.07 mol/L of Zn ions, over 88% HCl recovery efficiency could be achieved and Fe leakage was within the range of 11-23%. However, over 56% of Zn leakage was found due to the formation of negative Zn complexes in solution, which was unfavorable for the recovered acid reuse.

  12. Effect of acid shock with hydrochloric, citric, and lactic acids on the survival and growth of Salmonella typhi and Salmonella typhimurium in acidified media.

    PubMed

    Arvizu-Medrano, Sofía M; Escartín, Eduardo F

    2005-10-01

    The effect of acid shock with hydrochloric, citric, or lactic acid on the survival and growth of Salmonella Typhi and Salmonella Typhimurium in acidified broth was evaluated. Salmonella serovars were acid shocked (1 h at 35 degrees C) in Trypticase soy broth acidified with hydrochloric, citric, or lactic acid at pH 5.5. Unshocked cells were exposed to the same media that had been neutralized before use to pH 7.0. Shocked and unshocked cells were inoculated into broth acidified with hydrochloric acid (pH 3.0), citric acid (pH 3.0), or lactic acid (pH 3.8), and growth and survival ability were evaluated. The acid shock conferred protection to Salmonella against the lethal effects of low pH and organic acids. The adaptive response was not specific to the anion used for adaptation. The biggest difference in reduction of survival between shocked and unshocked strains (approximately 2 log CFU/ml) was observed when the microorganisms were shocked with lactic acid and then challenged with citric acid. Salmonella Typhi was more tolerant of citric acid than was Salmonella Typhimurium, but Salmonella Typhimurium had higher acid tolerance in response to acid shock than did Salmonella Typhi. The acid shock decreased the extension of the lag phase and enhanced the physiological state values of Salmonella Typhi and Salmonella Typhimurium when the pH of growth was 4.5. This increased ability to tolerate acidity may have an important impact on food safety, especially in the case of Salmonella Typhi, given the very low infectious dose of this pathogen.

  13. Leaching lithium from the anode electrode materials of spent lithium-ion batteries by hydrochloric acid (HCl).

    PubMed

    Guo, Yang; Li, Feng; Zhu, Haochen; Li, Guangming; Huang, Juwen; He, Wenzhi

    2016-05-01

    Spent lithium-ion batteries (LIBs) are considered as an important secondary resource for its high contents of valuable components, such as lithium and cobalt. Currently, studies mainly focus on the recycling of cathode electrodes. There are few studies concentrating on the recovery of anode electrodes. In this work, based on the analysis result of high amount of lithium contained in the anode electrode, the acid leaching process was applied to recycle lithium from anode electrodes of spent LIBs. Hydrochloric acid was introduced as leaching reagent, and hydrogen peroxide as reducing agent. Within the range of experiment performed, hydrogen peroxide was found to have little effect on lithium leaching process. The highest leaching recovery of 99.4wt% Li was obtained at leaching temperature of 80°C, 3M hydrochloric acid and S/L ratio of 1:50g/ml for 90min. The graphite configuration with a better crystal structure obtained after the leaching process can also be recycled.

  14. Antinutritional factor content and hydrochloric acid extractability of minerals in pearl millet cultivars as affected by germination.

    PubMed

    Abdelrahaman, Samia M; Elmaki, Hagir B; Idris, Wisal H; Hassan, Amro B; Babiker, Elfadil E; El Tinay, Abdullahi H

    2007-02-01

    Four pearl millet cultivars of two different species--Kordofani and Ugandi (Pennisetum typhoideum) and Madelkawaya and Shambat (Pennisetum glaucum)--were germinated for 6 days. The germinated grains were dried and milled. Phytic acid and polyphenol contents and hydrochloric acid (HCl) extractability of minerals from the malt flours were determined at intervals of 2 days during germination. Phytic acid and polyphenol contents decreased significantly (P <0.01) with an increase in germination time, with a concomitant increase in HCl extractable minerals. However, the major mineral content was significantly decreased while that of trace minerals was increased with germination time. When the grains were germinated for 6 days, Madelkawaya had higher extractable calcium while Ugandi had higher extractable phosphorus, whereas iron and manganese recorded high levels in Shambat and Madelkawaya, respectively. There was good correlation between antinutritional factors reduction and the increment in extractable minerals with germination time.

  15. Effect of the structural features of hydrochloric acid-deamidated wheat gluten on its susceptibility to enzymatic hydrolysis.

    PubMed

    Cui, Chun; Hu, Qingling; Ren, Jiaoyan; Zhao, Haifeng; You, Lijun; Zhao, Mouming

    2013-06-19

    The effect of the structural features of hydrochloric acid-deamidated wheat gluten with different degrees of deamidation (DDs) on the susceptibility to enzymatic hydrolysis by pancreatin was investigated. The wheat gluten deamidated by hydrochloric acid with a DD of 55% revealed the highest susceptibility to enzymatic hydrolysis as evaluated by the hydrolysis degree and nitrogen solubility index of the hydrolysates. An increase of peptides with MW below 3000 Da was observed as the DD increased. Raman spectra in the 1740-1800 cm⁻¹ and 521-530 cm⁻¹ range suggested that wheat gluten had taken off the deamidation with different DDs and that the disulfide bond had disrupted the sulfhydryl groups with different intensities, respectively. Results from the deconvolution of the amide I region of FTIR spectra in the 1600-1700 cm⁻¹ range showed that the content of the α-helix decreased and that the content of the β-turn and β-sheet increased with increasing DDs, which improved the molecular structure and flexibility of wheat gluten. A scanning electron microscope (SEM) revealed that the image of HDG-55% presented the smoothest surface and the least uniform pore, enabling the sample to be more susceptible to enzymatic hydrolysis. The above information will enable us to better understand the effect of structure on the susceptibility of deamidated wheat gluten.

  16. Hydrochloric acid alters the effect of L-glutamic acid on cell viability in human neuroblastoma cell cultures.

    PubMed

    Croce, Nicoletta; Bernardini, Sergio; Di Cecca, Stefano; Caltagirone, Carlo; Angelucci, Francesco

    2013-07-15

    l-Glutamic acid (l-glutamate) is used to induce excitotoxicity and test neuroprotective compounds in cell cultures. However, because l-glutamate powder is nearly insoluble in water, many manufacturers recommend reconstituting l-glutamate in hydrochloric acid (HCl) prior to successive dilutions. Nevertheless, HCl, even at low concentrations, may alter the pH of the cell culture medium and interfere with cell activity. Thus, the aim of this study was to evaluate whether the reconstitution of l-glutamate powder in HCl alters its capacity to induce neurotoxicity in different human neuroblastoma cell lines. SH-SY5Y, IMR-32 and SK-N-BE(2) cells were exposed to various concentrations of l-glutamate, which was either reconstituted in HCl (1M) or post re-equilibrated to the pH of the culture medium (7.5). After 24 and 48h of incubation, changes in the cell viability of treated versus untreated cells were evaluated. The effect of an identical amount of HCl present in the l-glutamate dilutions on neuroblastoma cell survival was also investigated. Our data showed that the neurotoxicity of glutamate reconstituted in HCl was comparable to that of HCl alone. Moreover, the pH variations induced by glutamate or HCl in the culture medium were similar. When the pH of the glutamate stock solution was re-equilibrated, l-glutamate induced variation in cell viability to a lower extent and after a longer incubation time. This study demonstrated that HCl used to reconstitute l-glutamate powder might alter the effect of glutamate itself in neuroblastoma cell cultures. Thus, this information might be useful to scientists who use l-glutamate to induce excitotoxicity or to test neuroprotective agents.

  17. Growth and membrane fluidity of food-borne pathogen Listeria monocytogenes in the presence of weak acid preservatives and hydrochloric acid.

    PubMed

    Diakogiannis, Ioannis; Berberi, Anita; Siapi, Eleni; Arkoudi-Vafea, Angeliki; Giannopoulou, Lydia; Mastronicolis, Sofia K

    2013-01-01

    This study addresses a major issue in microbial food safety, the elucidation of correlations between acid stress and changes in membrane fluidity of the pathogen Listeria monocytogenes. In order to assess the possible role that membrane fluidity changes play in L. monocytogenes tolerance to antimicrobial acids (acetic, lactic, hydrochloric acid at low pH or benzoic acid at neutral pH), the growth of the bacterium and the gel-to-liquid crystalline transition temperature point (T m) of cellular lipids of each adapted culture was measured and compared with unexposed cells. The T m of extracted lipids was measured by differential scanning calorimetry. A trend of increasing T m values but not of equal extent was observed upon acid tolerance for all samples and this increase is not directly proportional to each acid antibacterial action. The smallest increase in T m value was observed in the presence of lactic acid, which presented the highest antibacterial action. In the presence of acids with high antibacterial action such as acetic, hydrochloric acid or low antibacterial action such as benzoic acid, increased T m values were measured. The T m changes of lipids were also correlated with our previous data about fatty acid changes to acid adaptation. The results imply that the fatty acid changes are not the sole adaptation mechanism for decreased membrane fluidity (increased T m). Therefore, this study indicates the importance of conducting an in-depth structural study on how acids commonly used in food systems affect the composition of individual cellular membrane lipid molecules.

  18. Remediation of soils contaminated with chromium using citric and hydrochloric acids: the role of chromium fractionation in chromium leaching.

    PubMed

    Cheng, Shu-Fen; Huang, Chin-Yuan; Tu, Yao-Ting

    2011-01-01

    Acid washing is a common method for soil remediation, but is not always efficient for chromium-contaminated soil. Both soil particle size and the forms of chromium existing in the soil affect the efficiency of soil washing. Laboratory batch and column dissolution experiments were conducted to determine the efficiencies of citric and hydrochloric acids as agents to extract chromium from soils contaminated with chromium. The effects of soil particle size and chromium fractionation on Cr leaching were also investigated. About 90% of chromium in the studied soil existed either in residual form or bound to iron and manganese oxides, and Cr fraction distributions were similar for all soil particle sizes. Almost all exchangeable and carbonate-bound chromium was removed by washing once with 0.5 M HCl, whereas organic chromium was more effectively removed by washing with citric acid rather than with HCl solution of the same concentration. For chromium fractions that were either bound to Fe-Mn oxides or existed as residual forms, the efficiencies of acid washing were usually 20% or less, except for 0.5 M HCl solution, which had much higher efficiencies. Separation of the soil sample by particle size before the separate washing of the soil fractions had little improvement on the chromium removal.

  19. A kinetic study of plutonium dioxide dissolution in hydrochloric acid using iron (II) as an electron transfer catalyst

    SciTech Connect

    Fife, K.W.

    1996-09-01

    Effective dissolution of plutonium dioxide has traditionally been accomplished by contact with strong nitric acid containing a small amount of fluoride at temperatures of {approximately} 100 C. In spite of these aggressive conditions, PuO{sub 2} dissolution is sometimes incomplete requiring additional contact with the solvent. This work focused on an alternative to conventional dissolution in nitric acid where an electron transfer catalyst, Fe(II), was used in hydrochloric acid. Cyclic voltammetry was employed as an in-situ analytical technique for monitoring the dissolution reaction rate. The plutonium oxide selected for this study was decomposed plutonium oxalate with > 95% of the material having a particle diameter (< 70 {micro}m) as determined by a scanning laser microscopy technique. Attempts to dry sieve the oxide into narrow size fractions prior to dissolution in the HCl-Fe(II) solvent system failed, apparently due to significant interparticle attractive forces. Although sieve splits were obtained, subsequent scanning laser microscopy analysis of the sieve fractions indicated that particle segregation was not accomplished and the individual sieve fractions retained a particle size distribution very similar to the original powder assemblage. This phenomena was confirmed through subsequent dissolution experiments on the various screen fractions which illustrated no difference in kinetic behavior between the original oxide assemblage and the sieve fractions.

  20. Protective role of S-adenosyl-L-methionine against hydrochloric acid stress in Saccharomyces cerevisiae.

    PubMed

    Malakar, Dipankar; Dey, Anindya; Ghosh, Anil K

    2006-09-01

    S-adenosyl-L-methionine (AdoMet, 1mM) protects the stationary phase cells of Saccharomyces cerevisiae against the killing effect of acid (10mM HCl, pH approximately 2). Both the acid and the acid plus AdoMet treatment for 2h increased the plasma membrane H(+)-ATPase activity; thereafter it decreased to the basal level. AdoMet partially recovered the intracellular pH (pH(in)) that dropped in presence of acid. AdoMet treatment facilitated acid induced phospholipid biosynthesis as well as membrane proliferation, which was reflected in the cellular lipid composition.

  1. [Butanol extraction combined with dilute hydrochloric acid dissolution-atomic fluorescence spectrometric method for indirect determination of molybdenum in Chinese herbal medicine].

    PubMed

    Lu, Jian-Ping; Geng, Guo-Xing; Tang, Yan-Kui; Lu, Zhi-Yong

    2012-12-01

    A method for indirectly determining the molybdenum in Chinese herbal medicine by butanol extraction and dilute hydrochloric acid dissolution was established for atomic fluorescence spectrometry. The molybdoarsenate heteropoly acid, formed in the presence of As(V) and ammonium molybdate in 0.3 mol x L(-1) sulphuric acid medium, was separated and enriched in the organic solvent, then the evaporation of organic reagent was implemented and the left residue was dissolved in dilute hydrochloric acid in which the arsenic content was determined on behalf of molybdenum. In the optimum experimental conditions, molybdenum content in 0-15 microg x L(-1) range depicts a good linear relationship, the detection limit and relative standard deviation of 0.44 microg x L(-1) and 1.1% were obtained, respectively. Spiked Chinese herbal medicine samples were determined with the proposed method, and recoveries of 95.6%-101.3% were achieved.

  2. Experimental and theoretical study for corrosion inhibition of mild steel in hydrochloric acid solution by some new hydrazine carbodithioic acid derivatives

    NASA Astrophysics Data System (ADS)

    Khaled, K. F.

    2006-04-01

    The corrosion inhibition of mild steel in 0.5 M hydrochloric acid solutions by some new hydrazine carbodithioic acid derivatives namely N'-furan-2-yl-methylene-hydrazine carbodithioic acid (A), N'-(4-dimethylamino-benzylidene)-hydrazine carbodithioic acid (B) and N'-(3-nitro-benzylidene)-hydrazine carbodithioic (C) was studied using chemical (weight loss) and electrochemical (potentiodynamic and electrochemical impedance spectroscopy, EIS) measurements. These measurements show that the inhibition efficiency obtained by these compounds increased by increasing their concentration. The inhibition efficiency follow the order C > B > A. Polarization studies show that these compounds act as mixed type inhibitors in 0.5 M HCl solutions. These inhibitors function through adsorption following Langmuir isotherm. The electronic properties of these inhibitors, obtained using PM3 semi-empirical self-consistence field method, have been correlated with their experimental efficiencies using non-linear regression method.

  3. Anion-exchange separation of Pt and Pd using perchloric and hydrochloric acid solutions

    USGS Publications Warehouse

    Petrie, R.K.; Morgan, J.W.

    1982-01-01

    On Biorad Ag-1X8 anion-exchange resin (200-400 mesh), Pd and Pt may be separated from one another by elution with 0.2M HClO4, and 5M HClO4, respectively. If present, Au may be retained by making the elutriants 0.003M in HCl. Alternatively, reduction by H2SO3 enables elution of Pt2+ with 6M HCl before recovery of Pd2+ with 0.2M HClO4??Ir4+ is reduced to Ir3+ by H2SO3 and may be eluted ahead of Pt2+ by 2M HCl. ?? 1982 Akade??miai Kiado??.

  4. Interaction between amylose and 1-butanol during 1-butanol-hydrochloric acid hydrolysis of normal rice starch.

    PubMed

    Hu, Xiuting; Wei, Benxi; Zhang, Bao; Li, Hongyan; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2013-10-01

    The aim of this study was to examine the interaction between amylose and 1-butanol during the 1-butanol-hydrochloric acid (1-butanol-HCl) hydrolysis of normal rice starch. The interaction model between amylose and 1-butanol was proposed using gas chromatography-mass spectrometry (GC-MS), (13)C cross polarization and magic angle spinning NMR analysis ((13)C CP/MAS NMR), differential scanning calorimetry (DSC), and thermalgravimetric analysis (TGA). GC-MS data showed that another form of 1-butanol existed in 1-butanol-HCl-hydrolyzed normal rice starch, except in the form of free molecules absorbed on the starch granules. The signal of 1-butanol-HCl-hydrolyzed starch at 100.1 ppm appeared in the (13)C CP/MAS NMR spectrum, indicating that the amylose-1-butanol complex was formed. DSC and TGA data also demonstrated the formation of the complex, which significantly affected the thermal properties of normal rice starch. These findings revealed that less dextrin with low molecular weight formed might be attributed to resistance of this complex to acid during 1-butanol-HCl hydrolysis.

  5. X-ray microtomography of hydrochloric acid propagation in carbonate rocks.

    PubMed

    Machado, A C; Oliveira, T J L; Cruz, F B; Lopes, R T; Lima, I

    2015-02-01

    Acid treatments are used in the oil and gas industry, to increase the permeability of the carbonate reservoirs by creating preferential channels, called wormholes. Channels formation is strongly influenced by acid type and injection rate. The aim of this study is to evaluate some characteristics of the microporous system of carbonate rocks, before and after acidizing. For that purpose X-ray high-resolution microtomography was used. The results show that this technique can be used as a reliable method to analyze microstructural characteristics of the wormholes.

  6. Corrosion effects of hydrogen sulfide on coiled tubing and carbon steel in hydrochloric acid

    SciTech Connect

    1997-09-01

    Coiled tubing is commonly used in oilwell drilling and stimulation. It has been reported to be less susceptible to acid attack than carbon steel in acidizing. Corrosion problems are frequently reported from field activities and include corrosion/erosion, galvanic attack, brine/oxygen/acid attack, and HCl/H{sub 2}S attack. In this study, coiled tubing was exposed to inhibited HCl acid in the presence and absence of H{sub 2}S. Four HCl inhibitors and one H{sub 2}S inhibitor were evaluated, and the corrosion rates of coiled tubing, carbon steel (J-55), and carburized steel were compared. Tests were conducted at atmospheric pressure for temperatures less than and equal to 200 F. At temperatures greater than 200 F; tests were conducted at 4,000 psi.

  7. Selective recovery of vanadium and scandium by ion exchange with D201 and solvent extraction using P507 from hydrochloric acid leaching solution of red mud.

    PubMed

    Zhu, Xiaobo; Li, Wang; Tang, Sen; Zeng, Majian; Bai, Pengyuan; Chen, Lunjian

    2017-05-01

    D201 resin and P507 extractant diluted with sulfonated kerosene were used to respectively separate vanadium and scandium, and impurity ions from hydrochloric acid leaching solution of red mud. More than 99% of vanadium was selectively adsorbed from the hydrochloric acid leaching solution under the conditions of pH value of 1.8, volume ratio of leaching solution to resin of 10, and flow rate of 3.33 mL/min. Maximum extraction and separation of scandium was observed from the acid leaching solution at an aqueous pH value of 0.2. More than 99% of scandium can be selectively extracted using 15% P507, 5% TBP at the aqueous solution/organic phase (A/O) ratio of 10:1 for 6 min. The loaded organic phase was washed with 0.3 mol/L sulfuric acid, wherein most impurities were removed. After the process of desorption or stripping, precipitation, and roasting, high-purity V2O5 and Sc2O3 were obtained. Finally, a conceptual flow sheet was established to separate and recover vanadium and scandium from red mud hydrochloric acid leaching solution.

  8. Kinetics, aggregation behavior and optimization of the fractionation of whey protein isolate with hydrochloric acid

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Concentrated WPI solutions (10% (w/w)) containing approximately 30% alpha-lactalbumin (alpha-LA) and 60% beta-lactoglobulin (beta-LG) were fractionated with HCl at acidic pH and moderate temperatures to denature alpha-LA and recover the alpha-LA aggregates via centrifugation. Aggregation behavior an...

  9. Bipolar membrane electrodialysis for generation of hydrochloric acid and ammonia from simulated ammonium chloride wastewater.

    PubMed

    Li, Ya; Shi, Shaoyuan; Cao, Hongbin; Wu, Xinmin; Zhao, Zhijuan; Wang, Liying

    2016-02-01

    Simulated ammonium chloride wastewater was treated by a lab-scale bipolar membrane electrodialysis for the generation of HCl and NH3·H2O and desalination. The influence of initial concentration of NH4Cl, current density, salt solution volume, initial concentration of acid and base and membrane stack structure on the yields of HCl and NH3·H2O was investigated. The current efficiency and energy consumption were also examined under different conditions. The results showed that, at the current density of 48 mA/cm(2), the highest concentration of HCl and NH3·H2O with initial concentration of 110 g/L NH4Cl was 57.67 g/L and 45.85 g/L, respectively. Higher initial concentration of NH4Cl was favor to reduce unit energy consumption and increase current efficiency of the BMED system. The membrane stack voltage of BMED increased quickly under constant current when the concentration of NH4Cl contained in the solution of salt compartment was depleted below the "inflection point concentration" about 8000 mg/L. It means that the concentration of NH4Cl below 8000 mg/L was no longer suitable for BMED because of higher energy consumption. The HCl and NH3·H2O concentration increased more quickly following the increase of current density. When increasing the volume of NH4Cl, the concentration of HCl and NH3·H2O also increased. The high initial concentration of acid and base could improve the final concentration of them, while the growth rate was decreased. Compared with the BMED system with three compartments, the growth rate of HCl concentration with the two compartments was higher and its unit energy consumption was lower. It meant that the performance of the BMED system could be improved by optimizing operation conditions. The application feasibility of the generation of HCl and NH3·H2O and desalination of ammonium chloride wastewater by BMED was proved.

  10. Thallium extraction from hydrochloric acid media into a deep eutectic solvent using bis(2-ethylhexyl) phosphate

    NASA Astrophysics Data System (ADS)

    Tran, Kate; Volia, Merinda; Tereshatov, Evgeny; Folden, Charles, III

    2016-09-01

    The chemical properties of superheavy elements are relatively unknown due to their short half-lives and difficulty of production. In preparation for a future experiment to study the chemical properties of element 113, separation techniques have been used to study the behavior of its homologs, In and Tl. Previous work studied the liquid-liquid extraction of radioactive 201Tl (t1 / 2 = 3 . 04 d) from various concentrations of HCl into a mixture of menthol and lauric acid that formed a so-called deep eutectic solvent (DES). This work focuses on the effects of adding an extraction agent, bis(2-ethylhexyl) phosphate (HDEHP), to the DES on the efficiency of thallium extraction. The extraction of Tl(I) was generally poor, both with and without HDEHP added. In contrast, 111In (t1 / 2 = 2 . 80 d) showed significant extraction using HDEHP added to the same DES. This difference in behavior could potentially be exploited in a future experiment on the chemistry of element 113. National Science Foundation.

  11. Quantification of hydrochloric acid and particulate deposition resulting from space shuttle launches at John F. Kennedy space center, Florida, USA

    NASA Astrophysics Data System (ADS)

    Dreschel, Thomas W.; Hall, Carlton R.

    1990-07-01

    Observations of damage to vegetation, acute reductions in surface water pH, and kills of small fish prompted the Biomedical Operations and Research Office at the John F. Kennedy Space Center to initiate intensive environmental evaluations of possible acute and long-term chronic impacts that may be produced by repeated launches of the space shuttle. An important step in this evaluation was the identification of deposition patterns and the quantification of ecosystem loading rates of exhaust constituents from the solid rocket motors (SRMs) in the area of the launch pad. These constituents are primarily aluminum oxide (Al2O3) and hydrochloric acid (HCl). During three launches of the space transportation system (STS-11, 13, and 14) up to 100 bulk deposition collectors, 83 mm in diameter containing 100 ml of deionized water, were deployed in a grid pattern covering 12.6 ha north of launch pad 39-A. Estimates of HCl and particulate deposition levels were made based on laboratory measurements of items entrained in the collectors. Captured particulates consisted of a variety of items including Al2O3, sand grains, sea shell fragments, paint chips, and other debris ablated from the launch pad surface by the initial thrust of the SRMs. Estimated ranges of HCl and particulate deposition in the study area were 0-127 g/m2 and 0-246 g/m2, respectively. Deposition patterns were highly influenced by wind speed and direction. These measurements indicate that, under certain meteorological conditions, up to 7.1 × 103 kg of particulates and 3.4 × 103 kg of HCl can be deposited to the near-field environment beyond the launch pad perimeter fence.

  12. Extraction and separation of Pd(II), Pt(IV), Fe(III), Zn(II), Cu(II) and Ag(I) from hydrochloric acid solutions with selected cyanamides as novel extractants.

    PubMed

    Mowafy, E A; Aly, H F

    2007-10-22

    Three structurally related novel extractants namely: N,N-dihexylcyanamide (DHCY), N,N-di(2-ethylhexyl)cyanamide (DEHCY) and N,N-di-octylcyanamide (DOCY) were synthesized in our laboratory and characterized by different techniques. The general method for synthesizing these extractants was based on the reaction of relevant secondary amines with cyanogen bromide in presence of sodium acetate anhydride. Their extracting ability in toluene as a diluent for Pd(II), Pt(IV), Fe(III), Zn(II), Cu(II) and Ag(I) from hydrochloric acid media has been studied. The extraction of hydrochloric acid was studied also. Pd(II) was strongly extracted by these extractants at low hydrochloric acid concentrations and the extraction decreased with increasing hydrochloric acid concentration while the reverse was obtained in the extraction of Pt(IV), Fe(III) and Zn(II). Under similar extraction conditions Cu(II) and Ag(I) were found poorly extracted. Hydrochloric acid was extracted only in its high concentration region. A systematic investigation has been carried out on the extraction of Pd(II) using two of the synthesized extractants. Pd(II) was extracted as a solvated complex with the composition, metal:chloride ion:extractant=1:2:2. The extracted species were studied also using IR spectra.

  13. A two-stage pretreatment process using dilute hydrochloric acid followed by Fenton oxidation to improve sugar recovery from corn stover.

    PubMed

    Li, Wenzhi; Liu, Qiyu; Ma, Qiaozhi; Zhang, Tingwei; Ma, Longlong; Jameel, Hasan; Chang, Hou-Min

    2016-11-01

    A two-stage pretreatment process is proposed in this research in order to improve sugar recovery from corn stover. In the proposed process, corn stover is hydrolyzed by dilute hydrochloric acid to recover xylose, which is followed by a Fenton reagent oxidation to remove lignin. 0.7wt% dilute hydrochloric acid is applied in the first stage pretreatment at 120°C for 40min, resulting in 81.0% xylose removal. Fenton reagent oxidation (1g/L FeSO4·7H2O and 30g/L H2O2) is performed at room temperature (about 20°C) for 12 has a second stage which resulted in 32.9% lignin removal. The glucose yield in the subsequent enzymatic hydrolysis was 71.3% with a very low cellulase dosage (3FPU/g). This two-stage pretreatment is effective due to the hydrolysis of hemicelluloses in the first stage and the removal of lignin in the second stage, resulting in a very high sugar recovery with a low enzyme loading.

  14. Speciation analysis of Sb(III) and Sb(V) in antileishmaniotic drug using Dowex 1 x 4 resin from hydrochloric acid solution.

    PubMed

    Łukaszczyk, L; Zyrnicki, W

    2010-09-05

    A new and simple method for the direct and simultaneous determination of Sb(III) and Sb(V) in meglumine antimoniate, the first-choice drug for leishmaniasis treatment, was developed. Speciation analysis was carried out using the quantitative separation of inorganic trivalent and pentavalent antimony on Dowex 1 x 4 resin from 1.5 mol l(-1) hydrochloric acid solution. The inductively coupled plasma optical emission spectrometry (ICP-OES) was used for determination of antimony. The interfering effects of As, Bi, Cd, Cu, Mn, Pb and Zn were examined and only Bi was found to be a significant interferent. The liberation of Sb(V) and Sb(III) from organoantimonial compounds without changing of oxidation state was carried out by means of 1.5 mol l(-1) hydrochloric acid solution. The spike recovery values obtained for Sb(III) in pharmaceutical sample varied from 92 to 100%. The method was successfully applied for the direct determination of antimony(III) and of antimony(V) in meglumine antimoniate.

  15. Extraction of gold(III) from hydrochloric acid solutions by CTAB/n-heptane/iso-amyl alcohol/Na2SO3 microemulsion.

    PubMed

    Lu, Wenjuan; Lu, Yanmin; Liu, Fei; Shang, Kai; Wang, Wei; Yang, Yanzhao

    2011-02-28

    The extraction of Au(III) from hydrochloric acid solutions by microemulsion was studied. The extraction experiments were carried out using cetyltrimethylammonium bromide (CTAB) as surfactant and iso-amyl alcohol as co-surfactant. Au(III) was found to be extracted into the microemulsion phase due to ion pair formation such as AuCl(4)(-)CTAB(+). The influence of temperature on the extraction of Au(III) has been investigated at temperatures ranging from 288 to 313 K. Temperature was found to decrease the distribution of Au(III). Thermodynamic parameters like enthalpy and entropy of the extraction, calculated by applying Van't Hoff equation, were -36.76 kJ mol(-1) and -84.87 J mol(-1) K(-1), respectively. Furthermore, the influence of the concentrations of hydrogen ion and chloride anion on the extraction efficiency (E%) were verified. Au(III) was extracted quantitatively (E%>99%) and selectively at the whole range of HCl concentrations (0.2-5 M). Recovery of gold from electrical waste and treatment of CTAB wastewater generated from the extraction were also discussed. Thus, the extraction of Au(III) from hydrochloric acid solutions by microemulsion is an effective approach.

  16. Effect of ruminal infusion of glucose, volatile fatty acids and hydrochloric acid on mineral metabolism in sheep.

    PubMed

    Giduck, S A; Fontenot, J P; Rahnema, S

    1988-02-01

    Two experiments were conducted to study the effects of alterations in ruminal pH and volatile fatty acid (VFA) concentrations on utilization of Mg and other minerals. In Exp. 1, two metabolism trials were conducted with 12 ruminally cannulated crossbred wethers fed 800 g/d of orchard-grass (Dactylis glomerata, L.) hay. After each feeding, wethers were ruminally infused with 500 ml (4.2 ml/min) or either 1) deionized water, 2) 40% (w/v) glucose solution, 3) .26 M propionic and .17 M butyric acid solution or 4) .35 M HCl. The pH of the VFA solution was adjusted to 6.8 with 10N NaOH. In Exp. 2, a metabolism trial was conducted with 12 ruminally cannulated crossbred wethers fed 600 g of orchard-grass hay and infused with a buffered VFA solution prepared as in Exp. 1 or with an unbuffered solution. In both experiments each trial consisted of a 5-d adaption period followed by four 5-d collections of feed, feces and urine. Compared with the glucose treatment, infusion of the buffered VFA solution produced similar acetic and propionic and higher (P less than .05) butyric acid concentrations (Exp. 1). The HCl solution produced changes in ruminal and pH values similar to those of the glucose infusion. In Exp. 1, apparent absorption of Mg was increased over twofold by the glucose infusion (P less than .05), but the other infusions had no effect. Apparent absorption of P was decreased (P less than .05) by HCl infusion, and K absorption was decreased by HCl and glucose infusions. In Exp. 2, infusion of the unbuffered VFA solution decreased apparent Mg absorption by 15.7%, compared with infusion of the buffered solution. These experiments suggest that the increased Mg absorption observed with carbohydrate supplementation is not due to alterations in ruminal pH or VFA levels.

  17. Selective extraction of zinc(II) over iron(II) from spent hydrochloric acid pickling effluents by liquid-liquid extraction.

    PubMed

    Mansur, Marcelo Borges; Rocha, Sônia Denise Ferreira; Magalhães, Fernando Silva; Benedetto, Jeaneth dos Santos

    2008-02-11

    The selective removal of zinc(II) over iron(II) by liquid-liquid extraction from spent hydrochloric acid pickling effluents produced by the zinc hot-dip galvanizing industry was studied at room temperature. Two distinct effluents were investigated: effluent 1 containing 70.2g/L of Zn, 92.2g/L of Fe and pH 0.6, and effluent 2 containing 33.9 g/L of Zn, 203.9g/L of Fe and 2M HCl. The following extractants were compared: TBP (tri-n-butyl phosphate), Cyanex 272 [bis(2,4,4-trimethylpentyl)phosphinic acid], Cyanex 301 [bis(2,4,4-trimethylpentyl) dithiophosphinic acid] and Cyanex 302 [bis(2,4,4-trimethylpentyl) monothiophosphinic acid]. The best separation results were obtained for extractants TBP and Cyanex 301. Around 92.5% of zinc and 11.2% of iron were extracted from effluent 1 in one single contact using 100% (v/v) of TBP. With Cyanex 301, around 80-95% of zinc and less than 10% of iron were extracted from effluent 2 at pH 0.3-1.0. For Cyanex 272, the highest extraction yield for zinc (70% of zinc with 20% of iron extraction) was found at pH 2.4. Cyanex 302 presented low metal extraction levels (below 10%) and slow phase disengagement characteristics. Reactions for the extraction of zinc with TBP and Cyanex 301 from hydrochloric acid solution were proposed.

  18. Ethanol-based organosolv treatment with trace hydrochloric acid improves the enzymatic digestibility of Japanese cypress (Chamaecyparis obtusa) by exposing nanofibers on the surface.

    PubMed

    Hideno, Akihiro; Kawashima, Ayato; Endo, Takashi; Honda, Katsuhisa; Morita, Masatoshi

    2013-03-01

    The effects of adding trace acids in ethanol based organosolv treatment were investigated to increase the enzymatic digestibility of Japanese cypress. A high glucose yield (60%) in the enzymatic hydrolysis was obtained by treating the sample at 170 °C for 45 min in 50% ethanol liquor containing 0.4% hydrochloric acid. Moreover, the enzymatic digestibility of the treated sample was improved to ∼70% by changing the enzyme from acremonium cellulase to Accellerase1500. Field emission scanning electron microscopy revealed the presence of lignin droplets and partial cellulose nanofibers on the surface of the treated sample. Simultaneous saccharification and fermentation of the treated samples using thermotolerant yeast (Kluyveromyces marxianus NBRC1777) was tested. A high ethanol concentration (22.1 g/L) was achieved using the EtOH50/W50/HCl0.4-treated sample compared with samples from other treatments.

  19. Characterization of N-terminal amino group-heme ligation emerging upon guanidine hydrochloric acid induced unfolding of Hydrogenobacter thermophilus ferricytochrome c552.

    PubMed

    Tai, Hulin; Kawano, Shin; Yamamoto, Yasuhiko

    2008-01-01

    Nonnative heme coordination structures emerging upon guanidine hydrochloric acid (GdnHCl) induced unfolding of Hydrogenobacter thermophilus ferricytochrome c552 were characterized by means of paramagnetic NMR. The heme coordination structure possessing the N-terminal amino group of the peptide chain in place of axial Met (His-Nterm form) was determined in the presence of GdnHCl concentrations in excess of 1.5 M at neutral pH. The stability of the His-Nterm form at pH 7.0 was found to be comparable with that of the bis-His form which has been recognized as a major nonnative heme coordination structure in cytochrome c folding/unfolding. Consequently, in addition to the bis-His form, the His-Nterm form is a substantial intermediate which affects the pathway and kinetics of the folding/unfolding of cytochromes c, of which the N-terminal amino groups are not acetylated.

  20. Comparison of the kinetic laws of the dissolution of bauxite and aluminum and iron(III) oxides and hydroxides in hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Gololobova, E. G.; Gorichev, I. G.; Lainer, Yu. A.; Kozlov, K. V.

    2013-07-01

    The influence of the temperature and concentration of a hydrochloric acid solution on the dissolution kinetics of aluminum and iron(III) oxides and hydroxides and a natural sample of aluminum-containing raw materials, bauxite, is studied. The rate W of the transition of iron(III) ions from bauxite is higher than the rate of aluminum ion transition. The dependence of the fraction of a dissolved solid phase on time τ of dissolution of the oxides and hydroxides is determined, α = 1 — exp(- Asinh( Wτ)). The solubility of iron(III) chloride increases and that of aluminum chloride decreases as the HCl concentration increases. An empirical equation is proposed for the description of the dependence of the process rate on a series of parameters,.

  1. Modification of di- and tetrasaccharides from shark cartilage keratan sulphate by refined anhydromethanolic hydrochloric acid-treatments and evaluation of their specific desulphation.

    PubMed

    Kariya, Yutaka; Watabe, Shugo; Mochizuki, Hideo; Imai, Kyoko; Kikuchi, Hiroshi; Suzuki, Kiyoshi; Kyogashima, Mamoru; Ishii, Tadashi

    2003-05-01

    Highly sulphated keratan di- and tetrasaccharides were prepared from keratan sulphate (KS) of shark cartilage by enzymatic digestion with keratanase II and subsequent chromatography. The tetrasaccharide fraction carrying four sulphate groups was completely desulphated by 100 mM anhydromethanolic hydrochloric acid (MeOH-HCl) treatment at room temperature for 16 h. The conditions for the desulphation reaction by MeOH-HCl treatment were examined using sulphated keratan di- and tetrasaccharides as substrates by means of reversed phase high performance liquid chromatography (HPLC) and/or capillary electrophoresis, followed by the preparation of partially desulphated keratan oligosaccharides. Sulphate substitution patterns of monosulphated keratan disaccharide and trisulphated keratan tetrasaccharide were evaluated by methylation analysis. The results suggested that 6-O-sulphate groups of Gal moieties are cleaved faster than those of GlcNAc moieties under the present conditions adopted for the MeOH-HCl treatment of KS-derived oligosaccharides.

  2. Photovoltaic properties of dye sensitised solar cells using TiO2 nanotube arrays for photoanodes: Role of hydrochloric acid treatment

    NASA Astrophysics Data System (ADS)

    Liu, Tian; Wang, Baoyuan; Xie, Jian; Li, Quantong; Zhang, Jun; Asghar, Muhammad Imran; Lund, Peter D.; Wang, Hao

    2015-11-01

    A hydrochloric acid treatment was performed to modify the surface of TiO2 nanotube arrays for improving the photovoltaic performance of dye-sensitized solar cells. The microstructural, optical and photovoltaic properties of TiO2 nanotube arrays and the assembled cells were investigated in detail. It was found that HCl treatment does not change the morphology and crystallographic structure of the nanotube arrays, but it results in more hydroxyl groups on the TiO2 surface for dye adsorption and a surface protonation for both an improved dye adsorption and a higher quantum yield of electron injection. A major performance enhancement was found which originated from the remarkable increase in the dye adsorption. A power conversion efficiency of 8.4%, JSC of ∼16.8 mA cm-2 and VOC of 0.7 V was observed when the photoanode was treated with a 0.1 M HCl solution.

  3. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos(®) IL 104.

    PubMed

    Bonggotgetsakul, Ya Ya Nutchapurida; Cattrall, Robert W; Kolev, Spas D

    2015-12-08

    Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of Au(III) extracted, was exhibited by a PIM consisting of 25 wt% Cyphos(®) IL 104, 5 wt% 1-dodecanol, and 70 wt% PVC. An almost complete back-extraction of the Au(III) extracted from this membrane was achieved by using a 0.10 mol L(-1) Na₂SO₃ receiver solution at pH 8. The stoichiometry of the extracted Au(III)/Cyphos® IL 104 adduct was determined as [P]⁺ [AuCl₄](-) H⁺ [PO₂](-) where [P]⁺ and [PO₂](-) represent trihexyl(tetradecyl) phosphonium and bis(2,4,4-trimethylpentyl) phosphinate ions, respectively. Back-extraction of Au(III) is suggested to occur by reduction of Au(III) to Au(I), with the formation of the species [Au(SO₃)₂](3-) in the aqueous receiver solution. Loss of 1-dodecanol from the newly developed PIM to the aqueous solutions in contact with it was observed, which indicated that this membrane was suitable for single use in the efficient recovery of Au(III) from hydrochloric acid solutions of electronic scrap or recycled jewelry.

  4. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos® IL 104

    PubMed Central

    Bonggotgetsakul, Ya Ya Nutchapurida; Cattrall, Robert W.; Kolev, Spas D.

    2015-01-01

    Abstract: Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of Au(III) extracted, was exhibited by a PIM consisting of 25 wt% Cyphos® IL 104, 5 wt% 1-dodecanol, and 70 wt% PVC. An almost complete back-extraction of the Au(III) extracted from this membrane was achieved by using a 0.10 mol L−1 Na2SO3 receiver solution at pH 8. The stoichiometry of the extracted Au(III)/Cyphos® IL 104 adduct was determined as [P]+ [AuCl4]− H+ [PO2]− where [P]+ and [PO2]− represent trihexyl(tetradecyl) phosphonium and bis(2,4,4-trimethylpentyl) phosphinate ions, respectively. Back-extraction of Au(III) is suggested to occur by reduction of Au(III) to Au(I), with the formation of the species [Au(SO3)2]3− in the aqueous receiver solution. Loss of 1-dodecanol from the newly developed PIM to the aqueous solutions in contact with it was observed, which indicated that this membrane was suitable for single use in the efficient recovery of Au(III) from hydrochloric acid solutions of electronic scrap or recycled jewelry. PMID:26670259

  5. Characterization of the Unusual Product from the Reaction between Cobalt(II) Chloride, Ethane-1,2-diamine, and Hydrochloric Acid: An Undergraduate Project Involving an Unknown Metal Complex.

    ERIC Educational Resources Information Center

    Curtis, Neil F.; And Others

    1986-01-01

    Discusses the need for student research-type chemistry projects based upon "unknown" metal complexes. Describes an experiment involving the product from the reaction between cobalt(II) chloride, ethane-1,2-diamine (en) and concentrated hydrochloric acid. Outlines the preparation of the cobalt complex, along with procedure, results and…

  6. Double-stranded helical twisted beta-sheet channels in crystals of gramicidin S grown in the presence of trifluoroacetic and hydrochloric acids.

    PubMed

    Llamas-Saiz, Antonio L; Grotenbreg, Gijsbert M; Overhand, Mark; van Raaij, Mark J

    2007-03-01

    Gramicidin S is a nonribosomally synthesized cyclic decapeptide antibiotic with twofold symmetry (Val-Orn-Leu-D-Phe-Pro)(2); a natural source is Bacillus brevis. Gramicidin S is active against Gram-positive and some Gram-negative bacteria. However, its haemolytic toxicity in humans limits its use as an antibiotic to certain topical applications. Synthetically obtained gramicidin S was crystallized from a solution containing water, methanol, trifluoroacetic acid and hydrochloric acid. The structure was solved and refined at 0.95 A resolution. The asymmetric unit contains 1.5 molecules of gramicidin S, two trifluoroacetic acid molecules and ten water molecules located and refined in 14 positions. One gramicidin S molecule has an exact twofold-symmetrical conformation; the other deviates from the molecular twofold symmetry. The cyclic peptide adopts an antiparallel beta-sheet secondary structure with two type II' beta-turns. These turns have the residues D-Phe and Pro at positions i + 1 and i + 2, respectively. In the crystals, the gramicidin S molecules line up into double-stranded helical channels that differ from those observed previously. The implications of the supramolecular structure for several models of gramicidin S conformation and assembly in the membrane are discussed.

  7. Minimizing the creation of spent pickling liquors in a pickling process with high-concentration hydrochloric acid solutions: mechanism and evaluation method.

    PubMed

    Tang, Bing; Su, Wen; Wang, Jing; Fu, Fenglian; Yu, Guojun; Zhang, Jianyin

    2012-05-15

    The purpose of this investigation is to propose a strategy for minimizing the creation of spent pickling liquors through the synergistic corrosion inhibition of OP-10 and potassium iodide, thus facilitating a cleaner production process for acid pickling of metals with a high-concentration solution (6.0 mol/l) of hydrochloric acid. Results obtained with the methods of weight loss and electrochemical polarization showed that adding KI and OP-10 could enhance the energy barrier of the corrosion reaction and improved the corrosion inhibition for mild steel in high concentration of HCl solutions. A synergistic effect was identified when KI and OP-10 were present in suitable proportions. The results of the electrochemical experiments and scanning electron microscope (SEM) observations showed that the complex inhibitor was a mixed-type inhibitor and it formed a compact film on the metal surface, thus providing an effective protection for the metal in the aggressive solutions, which significantly minimized the creation of spent pickling liquors. A simple and convenient method was also proposed for the quantificational evaluation of the inhibition degree in the creation of spent pickling liquors.

  8. Hydrothermal synthesis of highly crystalline RuS{sub 2} nanoparticles as cathodic catalysts in the methanol fuel cell and hydrochloric acid electrolysis

    SciTech Connect

    Li, Yanjuan; Li, Nan; Yanagisawa, Kazumichi; Li, Xiaotian; Yan, Xiao

    2015-05-15

    Highlights: • Highly crystalline RuS{sub 2} nanoparticles have been first synthesized by a “one-step” hydrothermal method. • The product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} with average particle size of 14.8 nm. • RuS{sub 2} nanoparticles were used as cathodic catalysts in methanol fuel cell and hydrochloric acid electrolysis. • The catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}. - Abstract: Highly crystalline ruthenium sulfide (RuS{sub 2}) nanoparticles have been first synthesized by a “one-step” hydrothermal method at 400 °C, using ruthenium chloride and thiourea as reactants. The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy/energy disperse spectroscopy (SEM/EDS), thermo gravimetric-differential thermal analyze (TG-DTA), transmission electron microscopy equipped with selected area electron diffraction (TEM/SAED). Fourier transform infrared spectra (IR), and X-ray photoelectron spectroscopy (XPS). XRD result illustrates that the highly crystalline product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} and the average particle size is 14.8 nm. SEM and TEM images display the products have irregular shape of 6–25 nm. XPS analyst indicates that the sulfur exists in the form of S{sub 2}{sup 2−}. Cyclic voltammetry (CV), rotating disk electrode (RDE), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements are conducted to evaluate the electrocatalytic activity and stability of the highly crystalline RuS{sub 2} nanoparticles in oxygen reduction reaction (ORR) for methanol fuel cell and hydrochloric acid electrolysis. The results illustrate that RuS{sub 2} is active towards oxygen reduction reaction. Although the activity of RuS{sub 2} is lower than that of Pt/C, the RuS{sub 2} catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}.

  9. Oxidative leaching process with cupric ion in hydrochloric acid media for recovery of Pd and Rh from spent catalytic converters.

    PubMed

    Nogueira, C A; Paiva, A P; Oliveira, P C; Costa, M C; da Costa, A M Rosa

    2014-08-15

    The recycling of platinum-group metals from wastes such as autocatalytic converters is getting growing attention due to the scarcity of these precious metals and the market pressure originated by increase of demand in current and emerging applications. Hydrometallurgical treatment of such wastes is an alternative way to the most usual pyrometallurgical processes based on smelter operations. This paper focuses on the development of a leaching process using cupric chloride as oxidising agent, in HCl media, for recovery of palladium and rhodium from a spent catalyst. The chloride media allows the adequate conditions for oxidising and solubilising the metals, as demonstrated by equilibrium calculations based on thermodynamic data. The experimental study of the leaching process revealed that Pd solubilisation is clearly easier than that of Rh. The factors temperature, time, and HCl and Cu(2+) concentrations were significant regarding Pd and Rh leaching, the latter requiring higher factor values to achieve the same results. Leaching yields of 95% Pd and 86% Rh were achieved under optimised conditions (T = 80 °C, t = 4h, [HCl] = 6M, [Cu(2+)] = 0.3M).

  10. Antiapoptotic role of S-adenosyl-l-methionine against hydrochloric acid induced cell death in Saccharomyces cerevisiae.

    PubMed

    Malakar, Dipankar; Dey, Anindya; Basu, Arghya; Ghosh, Anil K

    2008-01-01

    Exposure of stationary phase cells of Saccharomyces cerevisiae to 10 mM HCl (pH approximately 2) resulted in cell death as a function of time (up to 6 h) with most (about 40%-65%) of the cells showing apoptotic features including chromatin condensation along the nuclear envelope, exposure of phosphatidylserine on the outer leaflet of cytoplasmic membrane, and DNA fragmentation. During the first 2 h of acid exposure there was an increase in reactive oxygen species (ROS) level inside cells, with subsequent elevation in the level of lipid peroxidation and decrease in reducing equivalents culminating in loss of mitochondrial membrane potential (DeltaPsi(m)). An initial (1 h) event of mitochondrial hyper-polarization with subsequent elevation of ROS level of the acid treated cells was also observed. S-adenosyl-l-methionine (AdoMet; 1 mM) treatment increased the cell survival of the acid stressed cells. It partially scavenged the increased intracellular ROS level by supplementing glutathione through the transsulfuration pathway. It also inhibited acid mediated lipid peroxidation, partially recovered acid evoked loss of DeltaPsi(m) and protected the cells from apoptotic cell death. S-adenosyl di-aldehyde, an indirect inhibitor of the AdoMet metabolic pathway, increased mortality of the acid treated cells. Incubation of acid stressed cells with the antioxidant, N-acetyl-cysteine (1 mM), decreased the cellular mortality, but the same concentration of AdoMet offered more protection by scavenging the free radicals. The ability of AdoMet to scavenge ROS mediated apoptosis may be an important function of this molecule in responding to cellular stress. The study could open a new avenue for detailed investigation on the curative potential of AdoMet against gastric ulcer.

  11. Hydrochloric acid modification process for fabricating Bi2Sr2CaCu2O8+x THz oscillator stack on-chip coupled to THz detector

    NASA Astrophysics Data System (ADS)

    Nishikata, Tsubasa; Kato, Takahiro; Kotaki, Yukio; Suematsu, Hisayuki; Kawakami, Akira; Yasui, Kanji

    2014-01-01

    We fabricated Bi2Sr2CaCu2O8+δ (Bi-2212) intrinsic Josephson junctions (IJJ) integrating of an oscillator and a detector by double side photolithography and material modification with a dilutehydrochloric acid solution (pH = 1.65) within a monolithic Bi-2212 crystal. The dilute hydrochloric solution modifies Bi-2212 to insulating BiOCl. Various lateral dimensions of the oscillator IJJ from 45 × 8 to 95 × 30 µm2 were formed; all of the detectors were about 15 × 10 to 15 × 30 µm2 in lateral dimensions. These stacks have 180-416 junctions. Zero voltage current for the detector stack was measured at 77 K while sweeping a bias voltage in the oscillator stack. The zero voltage current of the detector stack was strongly suppressed when a kink structure in the current-voltage curve of the oscillator stacks appeared. This indicates that the oscillator stack emits radiation at this voltage. From the Josephson voltage-frequency relation, it is found that the voltage corresponds to about 0.5-1 THz.

  12. Corrosion inhibition of mild steel in 1 M hydrochloric acid by 2,5-bis(2-aminophenyl)-1,3,4-oxadiazole

    SciTech Connect

    Bentiss, F.; Lagrenee, M.; Traisnel, M.; Hornez, J.C.

    1999-10-01

    The inhibition effect of a new class of organic inhibitors (e.g., 2,5-bis(2-aminophenyl)-1,3,4-oxadiazole [2-APOX]) on the corrosion of mild steel in molar hydrochloric acid (HCl) was investigated. The inhibitor was synthesized and its inhibiting action on the corrosion was studied through weight loss and various electrochemical techniques. Potentiodynamic polarization studies clearly revealed the fact that 2-APOX is a mixed-type inhibitor. Changes in impedance parameters (charge-transfer resistance [R{sub t}] and double-layer capacitance [C{sub dl}]) were indicative of adsorption of 2-APOX on the metal surface, leading to the formation of a protective film that grew with increasing exposure time. The 2-APOX appeared to function through the general adsorption mode following the Langmuir adsorption isotherm model. Effect of temperature on the corrosion behavior of mild steel in 1 M NCl with addition of 80 mg/L of 2-APOX was studied in the temperature range from 25 C to 60 C. The associated activation corrosion and free adsorption energies were determined. This inhibitor is considered a noncytotoxic substance.

  13. Effects of hydrochloric acid treatment of TiO{sub 2} nanoparticles/nanofibers bilayer film on the photovoltaic properties of dye-sensitized solar cells

    SciTech Connect

    Song, Lixin; Du, Pingfan; Shao, Xiaoli; Cao, Houbao; Hui, Quan; Xiong, Jie

    2013-03-15

    Highlights: ► The TiO{sub 2} nanoparticles/TiO{sub 2} nanofibers bilayer film was fabricated for DSSC. ► The effects of HCl treated TiO{sub 2} on the performance of DSSC were investigated. ► The potential methods of improving conversion efficiency are suggested. - Abstract: The TiO{sub 2} nanoparticles/nanofibers bilayer film has been fabricated via spin coating and electrospinning followed by calcination. The TiO{sub 2} bilayer film with thickness of about 6.0 μm is composed of anatase TiO{sub 2} phase. Dye-sensitized solar cells (DSSC) were assembled by hydrochloric acid (HCl) treated TiO{sub 2} film. The results of the photocurrent action spectra, electrochemical impedance spectroscopy (EIS), and I–V curves showed that each photovoltaic parameter of DSSC increased with the concentration of HCl increasing, and reached a maximum value and afterwards decreased. The maximum incident monochromatic photo-to-electron conversion efficiency (at 350 nm) and maximum overall conversion efficiency (η) of 0.05 M HCl treated TiO{sub 2} based DSSC were enhanced to 48.0% and 4.75%, which were respectively increased by 14% and 6.3% than those of DSSC based on untreated TiO{sub 2} film.

  14. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid.

    PubMed

    Al-Amiery, Ahmed A; Binti Kassim, Fatin A; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2016-01-22

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10(-3) M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir's adsorption isotherm. The effect of te perature on corrosion behavior in the presence of 5 × 10(-3) M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  15. Lactic and hydrochloric acids induce different patterns of inflammatory response in LPS-stimulated RAW 264.7 cells.

    PubMed

    Kellum, John A; Song, Mingchen; Li, Jinyou

    2004-04-01

    Metabolic acidosis frequently complicates sepsis and septic shock and may be deleterious to cellular function. Different types of metabolic acidosis (e.g., hyperchloremic and lactic acidosis) have been associated with different effects on the immune response, but direct comparative studies are lacking. Murine macrophage-like RAW 264.7 cells were cultured in complete medium with lactic acid or HCl to adjust the pH between 6.5 and 7.4 and then stimulated with LPS (Escherichia coli 0111:B4; 10 ng/ml). Nitric oxide (NO), IL-6, and IL-10 levels were measured in the supernatants. RNA was extracted from the cell pellets, and RT-PCR was performed to amplify corresponding mediators. Gel shift assay was also performed to assess NF-kappa B DNA binding. Inc easing concentrations of acid caused increasing acidification of the media. Trypan blue exclusion and lactate dehydrogenase release demonstrated that acidification did not reduce cell viability. HCl significantly increased LPS-induced NO release and NF-kappa B DNA binding at pH 7.0 but not at pH 6.5. IL-6 and IL-10 expression (RNA and protein) were reduced with HCl-induced acidification, but IL-10 was reduced much more than IL-6 at low pH. By contrast, lactic acid significantly decreased LPS-induced NO, IL-6, and IL-10 expression in a dose-dependent manner. Lactic acid also inhibited LPS-induced NF-kappa B DNA binding. Two common forms of metabolic acidosis (hyperchloremic and lactic acidosis) are associated with dramatically different patterns of immune response in LPS-stimulated RAW 264.7 cells. HCl is essentially proinflammatory as assessed by NO release, IL-6-to-IL-10 ratios, and NF-kappa B DNA binding. By contrast, lactic acidosis is anti-inflammatory.

  16. Treasure of the Past VI: Standard Potential of the Silver-Silver-Chloride Electrode from 0° to 95° C and the Thermodynamic Properties of Dilute Hydrochloric Acid Solutions

    PubMed Central

    Bates, Roger G.; Bower, Vincent E.

    2001-01-01

    From electromotive-force measurements of the cell without liquid junction: Pt;H2,HCl(m),AgCl;Agthrough the range 0° to 95° C, calculations have been made of (1) the standard potential of the silver–silver-chloride electrode, (2) the activity coefficient of hydrochloric acid in aqueous solutions from m (molality) =0 to m=0.1 and from 0° to 90° C, (3) the relative partial molal heat content of hydrochloric acid, and (4) the relative partial molal heat capacity of hydrochloric acid. The extrapolations were made by the method of least squares with the aid of punch-card techniques. Data from at least 24 cells were analyzed at each temperature, and 81 cells were studied at 25° C. The value of the standard potential was found to be 0.22234 absolute volt at 25° C, and the standard deviation was 0.02 millivolt at 0° C, 0.01 millivolt at 25° C, and 0.09 millivolt at 95° C. The results from 0° to 60° C are compared with earlier determinations of the standard potential and other quantities derived from the electromotive force. PMID:27500034

  17. Corrosion Inhibitive Evaluation of an Environmentally Friendly Water-Base Acrylic Terpolymer on Mild Steel in Hydrochloric Acid Media

    NASA Astrophysics Data System (ADS)

    Azghandi, Mojtaba Vakili; Davoodi, Ali; Farzi, Gholam Ali; Kosari, Ali

    2013-12-01

    The corrosion inhibitive performance of an environmentally friendly water-base acrylic terpolymer [methyl methacrylate/Butyl Acrylate/Acrylic acid (ATP)] on mild steel in 1 M HCl was investigated by alternating current and direct current electrochemical techniques and the quantum chemical method. An efficiency of more than 97 pct was obtained with 0.8 mmol/L ATP. The increase in inhibitor concentration and immersion time has a positive effect, while the temperature influence is negligible on the inhibitor efficiency. The present terpolymer obeys the Langmuir isotherm, and thermodynamic calculation reveals a chemisorption type on the surface. Density functional calculations showed that the lone pairs of electrons of oxygen in the structure of three monomers are suitable sites to adsorb onto the metal surface. Finally, in the presence of ATP, a decrease in surface roughness and corrosion attacks was demonstrated by atomic force microscopy and optical microscopy examinations, respectively.

  18. Remediation of Pb-contaminated soils by washing with hydrochloric acid and subsequent immobilization with calcite and allophanic soil.

    PubMed

    Isoyama, Masahiro; Wada, Shin-Ichiro

    2007-05-17

    Removal of heavy metals from contaminated soil is not popular because of its high cost. Reducing the bioaccessible heavy metals content to an allowable level by washing with inorganic acids and subsequent immobilization of remained metals may be a low cost option for soil remediation. The applicability of this combined treatment was investigated using three different types of soil, a kaolinitic, a smectitic and an allophanic soil, which were artificially contaminated with Pb. The effectiveness of the treatment was evaluated using two main criteria: (i) reduction of the HCl extractable Pb (bioaccessible Pb) below 150 mg kg(-1), reduction of water extractable Pb below the concentration of 0.01 mg L(-1). These values correspond to allowable levels suggested by the Japanese Ministry of Environment. The soils were washed batch-wise at a solution to soil ratio of 5 L kg(-1) successively with 1 mol L(-1) HCl and 0.1 mol L(-1) CaCl(2) solutions. The two solutions were separated by filtration from one batch and reused for washing the next batch of soil without processing. The Pb concentration in the solutions increased after repeated use and removal efficiency gradually declined. The efficiency of the treatment was highly dependent on the type of soil. In the kaolinitic soil, HCl extractable Pb content of the soil from the first batch was about 50 mg kg(-1) and it exceeded 150 mg kg(-1) in that from sixth batch. But the combined soils from 1st to 10th batches gave bioaccessible Pb content barely below 150 mg kg(-1). For the smectitic soil having higher cation exchange capacity, the acceptable number of times of reuse was estimated to be 4. For the allophanic soil, treatment with the HCl solution was efficient only for the first batch of the soil, and the reuse of the acid solution was found to be ineffective. The application of 50 g kg(-1) of calcite or slacked lime was effective for reducing the water extractable Pb content. To keep soil pH near neutral and secure long

  19. [Effect of Hydrochloric acid on invasion of Ascaris suum; enzyme activity in the digestive system and serum of newborn piglets].

    PubMed

    Jabłonowski, Z; Romaniuk, K; Piechocki, D; Zółtowska, K; Lukaszewicz-Babecka, J; Dziekońska-Rynko, I J

    1995-01-01

    The studies were carried out on twenty newborn piglets. They were divided into four groups. The groups no 3 and no 4 were given intragastric 0.18% HCl from the 3th day of experiment. The groups no 2 and no 4 were infected on the 7th day with 10,000 invasive eggs of Ascaris suum. The presence of A. suum larvae in the lungs and liver was examined after one week lasting invasion by Baermann method. The total acidity in the gastric content was measured. The activity of alpha-amylase, lipase and proteases was determined in the extracts from pancreas and in the contents of stomach, duodenum and jejunum. The level of pepsinogens and alpha-amylase in the animals serum was studied. The intensity of Ascaris invasion was slightly higher in the group which was given HCl than in the infected group without HCl. The activity of digestive enzymes in the both groups was similar. Only in the stomach content from the 4th group the activity of pepsin was higher (p < 0.05), and alpha-amylase and lipase were lower (p < 0.01) than in the 2nd and in the 3th group. The level of pepsinogens was always lower and alpha-amylase higher in the serum of infected animals than in uninfected groups.

  20. Role of temperature and hydrochloric acid on the formation of chlorinated hydrocarbons and polycyclic aromatic hydrocarbons during combustion of paraffin powder, polymers, and newspaper.

    PubMed

    Takasuga, Takumi; Umetsu, Norihito; Makino, Tetsuya; Tsubota, Katsuya; Sajwan, Kenneth S; Kumar, Kurunthachalam Senthil

    2007-07-01

    Formation of chlorinated hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) were determined using a laboratory-scale incinerator when combusting materials at different temperatures, different concentrations of hydrochloric acid (HCl), and when combusting various types of polymers/newspaper. Polychlorobenzenes (PCBz), polychlorophenols (PCPhs), polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and their toxic equivalency (TEQ) and PAHs were highlighted and reported. Our results imply maximum formation of chlorinated hydrocarbons at 400 degrees C in the following order; PCBz>or=PCPhs>PCDFs>PCDDs>TEQ on a parts-per-billion level. Similarly, a maximum concentration of chlorinated hydrocarbons was noticed with an HCl concentration at 1000 ppm with the presence of paraffin powder in the following order; PAHs>PCBz>or=PCPhs>PCDFs>PCDDs>TEQ an a parts-per-billion level. PAHs were not measured at different temperatures. Elevated PAHs were noticed with different HCl concentrations and paraffin powder combustion (range: 27-32 microg/g). While, different polymers and newspaper combusted, nylon and acrylonitrile butadiene styrene (ABS) produced the maximum hydrogen cyanide (HCN) concentration, concentrations of PCDD/FS, dioxin-like polychlorinated biphenyls (DL-PCBs), and TEQ were in a decreasing order: polyvinylchloride (PVC)

  1. [Suicidal poisoning due to hydrogen sulfide produced by mixing a liquid bath essence containing sulfur and a toilet bowl cleaner containing hydrochloric acid].

    PubMed

    Kobayashi, Kanya; Fukushima, Hirofumi

    2008-04-01

    A 21-year-old man was found dead in a car. There were 9 empty bottles of 610HAP (a 440 g bottle of a liquid bath essence containing 160-195 g/kg sulfur) and 10 of Sunpole (a 500 mL bottle of a toilet bowl cleaner containing 9.5% HCl) in the car. The car doors were sealed with tape, and there was a strong smell of sulfur in and around the car. GC/MS analysis showed 0.66 microg/mL sulfide and 0.14 micromol/mL thiosulfate in the blood sample. The concentration of thiosulfate in the urine sample was normal. Police investigation concluded that the man killed himself by aspirating hydrogen sulfide that had been produced by mixing 610 HAP and Sunpole. To examine the amount of hydrogen sulfide produced, small portions of these liquids were mixed in a 560-mL volume flask. The results showed that 0.1 mL of each liquid produced 4,950 ppm of hydrogen sulfide, and 0.2 mL of each produced 10,800 ppm. According to these results, if the cabin volume is assumed to be 3,300 L, mixing 120 mL of each liquid produces a lethal level of hydrogen sulfide, i.e., 1,000 ppm. This was a rare suicide case, and it revealed the hazards of mixing of liquid bath essences containing sulfur and toilet bowl cleaners containing hydrochloric acid.

  2. Mitsubishi A6M2

    NASA Technical Reports Server (NTRS)

    1943-01-01

    Captured at Akutan Island, Alaska, in August 1942. This Mitsubishi A6M2 fighter was the first 'Zero' to fall intact into Allied hands during WW II. After limited flying on the West Coast, the 'Zero' arrived at Langley for installation of test equipment prior to in-depth flight testing by the Navy at Patuxent River, Maryland.

  3. Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines.

    PubMed

    Jang, Min; Hwang, Jung Sung; Choi, Sang Il

    2007-01-01

    Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Based on the results of a sequential extraction procedure, most arsenic prevails in Fe-As precipitates or coprecipitates, and iron exists mostly in the crystalline forms of iron oxide. Soil washing by use of a single agent was not effective in remediating arsenic-contaminated soils because arsenic extractions determined by the Korean standard test (KST) methods for washed soils were not lower than 6mg kg(-1) in all experimental conditions. The results of X-ray diffraction (XRD) indicated that iron-ore fines produced mobile colloids through coagulation and flocculation in water contacting the soils, containing dissolved arsenic and fine particles of ferric arsenate-coprecipitated silicate. The first washing step using 0.2M HCl was mostly effective in increasing the cationic hydrolysis of amorphous ferrihydrite, inducing high removal of arsenic. Thus, the removal step of arsenic-containing flocs can lower arsenic extractions (KST methods) of washed soils. Among several washing trials, alternative sequential washing using 0.2M HCl followed by 1M HCl (second step) and 1M NaOH solution (third step) showed reliable and lower values of arsenic extractions (KST methods) of washed soils. This washing method can satisfy the arsenic regulation of washed soil for reuse or safe disposal application. The kinetic data of washing tests revealed that dissolved arsenic was easily readsorbed into remaining soils at a low pH. This result might have occurred due to dominant species of positively charged crystalline iron oxides characterized through the sequential extraction procedure. However

  4. Evaluation of sampling methods for measuring exposure to volatile inorganic acids in workplace air. Part 1: sampling hydrochloric acid (HCl) and nitric acid (HNO₃) from a test gas atmosphere.

    PubMed

    Howe, Alan; Musgrove, Darren; Breuer, Dietmar; Gusbeth, Krista; Moritz, Andreas; Demange, Martine; Oury, Véronique; Rousset, Davy; Dorotte, Michel

    2011-08-01

    Historically, workplace exposure to the volatile inorganic acids hydrochloric acid (HCl) and nitric acid (HNO(3)) has been determined mostly by collection on silica gel sorbent tubes and analysis of the corresponding anions by ion chromatography (IC). However, HCl and HNO(3) can be present in workplace air in the form of mist as well as vapor, so it is important to sample the inhalable fraction of airborne particles. As sorbent tubes exhibit a low sampling efficiency for inhalable particles, a more suitable method was required. This is the first of two articles on "Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air" and describes collaborative sampling exercises carried out to evaluate an alternative method for sampling HCl and HNO(3) using sodium carbonate-impregnated filters. The second article describes sampling capacity and breakthrough tests. The method was found to perform well and a quartz fiber filter impregnated with 500 μL of 1 M Na(2)CO(3) (10% (m/v) Na(2)CO(3)) was found to have sufficient sampling capacity for use in workplace air measurement. A pre-filter is required to remove particulate chlorides and nitrates that when present would otherwise result in a positive interference. A GSP sampler fitted with a plastic cone, a closed face cassette, or a plastic IOM sampler were all found to be suitable for mounting the pre-filter and sampling filter(s), but care has to be taken with the IOM sampler to ensure that the sampler is tightly closed to avoid leaks. HCl and HNO(3) can react with co-sampled particulate matter on the pre-filter, e.g., zinc oxide, leading to low results, and stronger acids can react with particulate chlorides and nitrates removed by the pre-filter to liberate HCl and HNO(3), which are subsequently collected on the sampling filter, leading to high results. However, although there is this potential for both positive and negative interferences in the measurement, these are unavoidable

  5. Alteration of the phospho- or neutral lipid content and fatty acid composition in Listeria monocytogenes due to acid adaptation mechanisms for hydrochloric, acetic and lactic acids at pH 5.5 or benzoic acid at neutral pH.

    PubMed

    Mastronicolis, Sofia K; Berberi, Anita; Diakogiannis, Ioannis; Petrova, Evanthia; Kiaki, Irene; Baltzi, Triantafillia; Xenikakis, Polydoros

    2010-10-01

    This study provides a first approach to observe the effects on Listeria monocytogenes of cellular exposure to acid stress at low or neutral pH, notably how phospho- or neutral lipids are involved in this mechanism, besides the fatty acid profile alteration. A thorough investigation of the composition of polar and neutral lipids from L. monocytogenes grown at pH 5.5 in presence of hydrochloric, acetic and lactic acids, or at neutral pH 7.3 in presence of benzoic acid, is described relative to cells grown in acid-free medium. The results showed that only low pH values enhance the antimicrobial activity of an acid. We suggest that, irrespective of pH, the acid adaptation response will lead to a similar alteration in fatty acid composition [decreasing the ratio of branched chain/saturated straight fatty acids of total lipids], mainly originating from the neutral lipid class of adapted cultures. Acid adaptation in L. monocytogenes was correlated with a decrease in total lipid phosphorus and, with the exception of cells adapted to benzoic acid, this change in the amount of phosphorus reflected a higher content of the neutral lipid class. Upon acetic or benzoic acid stress the lipid phosphorus proportion was analysed in the main phospholipids present: cardiolipin, phosphatidylglycerol, phosphoaminolipid and phosphatidylinositol. Interestingly only benzoic acid had a dramatic effect on the relative quantities of these four phospholipids.

  6. Determination of triadimenol based on the quenching effect on resonance light scattering from the triadimenol-deoxyribonucleic acid-hydrochloric acid system.

    PubMed

    Du, Fengpei; Luo, Xiaolin; Jiang, Guibin; Hou, Shicong; Liu, Gang; Ren, Liping; Zhang, Li; Huang, Qin; Jie, Nianqin

    2007-05-01

    Analysis of triadimenol was carried out using deoxyribonucleic acids (DNA) via the resonance light scattering (RLS) technique. After adding triadimenol into aqueous medium of pH 1.72, the RLS of DNA was remarkably quenched. A resonance light scattering peak at 310 nm was found, and the quenched intensity of RLS at this wavelength was proportional to the concentration of triadimenol. The linear range of the calibration curve was approximately 0-3 microg mL-1 with a detection limit (S/N=3) of 0.07 microg mL-1. The triadimenol in samples of water, cucumber and human serum was determined. The results were satisfactory, and the recovery rates were in the range of 96.3-106.0%, 94.8-105.9% and 92.3-100.5%, respectively. The interaction mechanism was also studied.

  7. Analysis of twenty phenolic compounds in human urine: hydrochloric acid hydrolysis, solid-phase extraction based on K2CO 3-treated silica, and gas chromatography tandem mass spectrometry.

    PubMed

    Lu, Dasheng; Feng, Chao; Wang, Dongli; Lin, Yuanjie; Ip, Ho Sai Simon; She, Jianwen; Xu, Qian; Wu, Chunhua; Wang, Guoquan; Zhou, Zhijun

    2015-05-01

    This study developed a new method for the analysis of 20 phenolic compounds in human urine. The urine samples were prepared by hydrochloric acid (HCl) hydrolysis, liquid-liquid extraction (LLE), and solid-phase extraction (SPE) cleanup. We found that HCl hydrolysis is of similar effectiveness to, and much cheaper than, the traditional enzymatic method. Vanillic acid was co-eluted with butyl paraben and interfered with the determination of butyl paraben in urine. K2CO3-treated-silica-gel SPE was designed to efficiently eliminate interference from the endogenous organic acids (especially vanillic acid) in urine. After derivatization, the samples were analyzed by large-volume-injection gas chromatography-tandem mass spectrometry (LVI-GC-MS-MS). Good linearity (R (2) ≥ 0.996) was established in the range 0.1-100 ng mL(-1) for all analytes. Method detection limits (MDLs) were 0.7-9.8 pg mL(-1). Intraday (n = 5) and interday (n = 5 days) validation was performed, with satisfactory accuracy (recovery: 70-126 % and 73-107 %, respectively) and precision (RSD ≤ 19 %) at two levels (low: 0.1 and 0.5 ng mL(-1); high: 5 and 10 ng mL(-1)). The method was used in a population study and achieved more than 85 % detection for most analytes; mean analyte concentrations were in the range 0.01-185 ng mL(-1). The method is suitable for the analysis of multiple phenolic metabolites in human urine.

  8. Mitsubishi A6M2 'Zero'

    NASA Technical Reports Server (NTRS)

    1943-01-01

    Mitsubishi A6M2 'Zero': Captured at Akutan Island, Alaska, in August 1942, this Mitsubishi A6M2 fighter was the first 'Zero' to fall intact into Allied hands during WW II. After limited flying on the West Coast, the 'Zero' arrived at Langley for installation of test equipment prior to in-depth flight testing by the Navy at Patuxent River, Maryland.

  9. Survival of Salmonella strains differing in their biofilm-formation capability upon exposure to hydrochloric and acetic acid and to high salt.

    PubMed

    Hasegawa, Akio; Hara-Kudo, Yukiko; Kumagai, Susumu

    2011-09-01

    Acidic and osmotic treatments are part of hurdle systems to control pathogens such as Salmonella in food. In the current study, Salmonella enterica isolates previously shown to differ in their ability to form biofilms were grown in diluted tryptic soy broth (TSB) (1:5 dilution in distilled water) and subsequently exposed to phosphate-buffered saline (PBS) adjusted to pH 3.0 with HCl, PBS adjusted to pH 3.9 with acetic acid or rice vinegar diluted 1:15 with distilled water (pH 3.9). Cells grown in diluted TSB were also exposed to distilled water, pH 7.6, containing 5 M NaCl. No differences in survival upon exposure to PBS adjusted to pH 3.0 with HCl or distilled water containing high salt were observed between the isolates; however, exposure to acetic acid and rice vinegar resulted in lower survival levels of isolates previously shown to be poor biofilm formers. The numbers (log(10) cfu/ml) of surviving cells after exposure for 36 hr to acetic acid and rice vinegar were 4.43 ± 0.24 vs. 2.27 ± 0.87 (P<0.05) and 5.19 ± 0.12 vs. 2.33 ± 0.93 (P<0.05) for isolates with a high vs. low biofilm-forming ability. The survival data could be fitted with the Weibull model. The data suggest that the ability of Salmonella strains to survive in the presence of acetic acid and rice vinegar parallels their ability to form biofilms. Thus, Salmonella with a high biofilm-formation capability might be more difficult to kill with acetic acid found in foods or cleaning solutions.

  10. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10-3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10-3 M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  11. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    PubMed Central

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10−3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10−3 M inhibitor was studied in the temperature range of 30–60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl. PMID:26795066

  12. Structure of Hydronium (H3O+)/Chloride (Cl-) Contact Ion Pairs in Aqueous Hydrochloric Acid Solution: A Zundel-like Local Configuration

    SciTech Connect

    Fulton, John L.; Balasubramanian, Mahalingam

    2010-09-15

    Details of the H3O+ and H2O structure in the first solvation shell about Cl- in aqueous HCl solutions are reported from x-ray absorption fine structure (XAFS) measurements. Results show increasing degrees of contact ion pairing between Cl- and H3O+ as the HCl concentration increases from 6.0 m, 10.0 m and finally 16.1 m HCl (concentrated acid). At the highest acid concentration there are on average, approximately 1.6 H3O+ ions and 4.2 H2O’s in the first shell about Cl-. The structure of the Cl-/H3O+ contact ion pair is distinctly different than that of the H2O structure about Cl-. The Cl-O bond length (2.98Å) for Cl-/H3O+ is approximately 0.16 Å shorter than the Cl-/H2O bond. The bridging proton resides at an intermediate position between Cl and O at 1.60 Å from the Cl- and approximately 1.37 Å from the O of the H3O+. The bridging-proton structure of this contact ion pair, [Cl-H-OH2], is similar to structure of the water Zundel ion, [H2O-H-OH2]+. In both cases there is a shortened Cl-O or O-O bond and the intervening proton bond distances are substantially longer than for the covalent bonds of either HCl or H2O. The results further our understanding of the interaction H3O+ with Cl- that is of interest to fundamental physical chemistry and that has consequences in biochemical, geochemical and atmospheric processes.

  13. Inhibition Effects of a Synthesized Novel 4-Aminoantipyrine Derivative on the Corrosion of Mild Steel in Hydrochloric Acid Solution together with Quantum Chemical Studies

    PubMed Central

    Junaedi, Sutiana; Al-Amiery, Ahmed A.; Kadihum, Abdulhadi; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2013-01-01

    1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value. PMID:23736696

  14. Inhibition effects of a synthesized novel 4-aminoantipyrine derivative on the corrosion of mild steel in hydrochloric acid solution together with quantum chemical studies.

    PubMed

    Junaedi, Sutiana; Al-Amiery, Ahmed A; Kadihum, Abdulhadi; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2013-06-04

    1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.

  15. The OFP-6M transport jet

    NASA Technical Reports Server (NTRS)

    Alexander, Kelly; Heneghan, Brian; Holmes, Joules; Hughes, Bret; Kettering, Mark; Wells, Jennifer; Whelan, Todd

    1994-01-01

    This report presents a preliminary design of a commercial jet transport that meets the criteria of the Request For Proposal presented by the American Institute of Aeronautics and Astronauts (AIAA). The proposal requires an innovative design of a low cost domestic commercial transport that will reduce operating costs for airline companies while still meeting present and future requirements of the Federal Aviation Regulations for this type of aircraft. Specifications for the design include a mixed class, 153 passenger aircraft, traveling a range of 3000 nm. The intent of the project is to identify factors that reduce cost and to design within the limits of these constraints. The project includes techniques or options that incorporate new technologies but do not override practicality, alternative design approaches, and a comparison between the new design and current aircraft in its class. The OFP-6M is an alternative design approach to the conventional commercial transport jet and is geared towards customer satisfaction through efficiency and reliability. The goals of the OFP-6M transport design are to provide original, sensible, and practical solutions by combining essential preliminary design factors with growing technology. The design focus of the OFP-6M reduces costs by simplifying systems where significant weight or maintenance savings can be achieved, and by integrating advanced technology for improved performance. Key aspects of the OFP-6M design are efficient use of materials like composites, and efficient advanced ducted high bypass turbofan engines. The high bypass engines lower fuel consumption and aid in reducing costs and meeting future noise emission restrictions. Composites are used for most structural components, including flooring and wing box. Although composites are an emerging technology and presently, a high maintenance material, they can be cost effective and an alternative to aluminum structures when correct manufacturing and design strategies

  16. Solvent extraction of metals with hydroxamic acids.

    PubMed

    Vernon, F; Khorassani, J H

    1978-07-01

    Solvent extraction with hydroxamic acids has been investigated. with comparison of aliphatic and aromatic reagents for the extraction of iron, copper, cobalt and nickel. Caprylohydroxamic acid has been evaluated for use in extraction systems for titanium, vanadium, chromium, molybdenum and uranium, both in terms of acidity of aqueous phase and oxidation state of the metal. It has been established that caprylohydroxamic acid in 1-hexanol is a suitable extractant for the removal of titanium(IV), vanadium(V), chromium(VI), molybdenum(VI) and uranium(VI) from 6M hydrochloric acid.

  17. Complex Leaching Process of Scheelite in Hydrochloric and Phosphoric Solutions

    NASA Astrophysics Data System (ADS)

    Liu, Liang; Xue, Jilai; Liu, Kang; Zhu, Jun; Wang, Zengjie

    2016-09-01

    The complex leaching process of synthetic scheelite and scheelite concentrate in hydrochloric and phosphoric solutions has been investigated for improving process efficiency. A higher leaching rate, compared with the classic acid leaching process, can be obtained through the synergy of HCl and H3PO4 with appropriate W/P mole ratio, temperature, and acid concentration. For synthetic scheelite, the optimum leaching conditions were W/P mole ratio 7:1, temperature 50°C, HCl 0.72 mol/L, and stirring speed 600 rpm; for scheelite concentrate, W/P mole ratio 7:1, temperature 80°C, HCl 2.16 mol/L, and stirring speed 1000 rpm. The leaching rates under the optimized conditions can reach up to 98% or even higher. FTIR spectra analysis confirmed that the leachate composition remained as H3[PW12O40] in the range of varying W/P mole ratios, so the PO4 3- in acidic solution and phosphorus content in the leaching product could be better controlled. The function 1 - (1 - X)1/3 against leaching time was applied to fit the experimental data, and the apparent activation energy, E a, was calculated as 60.65 kJ/mol. The results would be valuable for effectively using scheelite as a raw material resource for sustainable tungsten production.

  18. Fabrication process of intrinsic Josephson junction stacks in Bi2Sr2CaCu2O8+x crystals by double-sided patterning process using dilute hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Kato, Takahiro; Ishida, Hiroki; Suematsu, Hisayuki; Yasui, Kanji; Hamasaki, Katsuyoshi

    2012-07-01

    We have developed a new double-sided patterning (DSP) process that employs dilute acid (pH = 1.65) to fabricate Bi2Sr2CaCu2O8+x (Bi-2212) stacks of intrinsic Josephson junctions. These stacks, which were fabricated from a single crystal of Bi-2212, were surrounded by an acid-treated product. The critical aspect of this process is that the Bi-2212 surrounding the photoresist pattern was converted into a transparent material, BiOCl, which was connected with the Bi-2212 crystal. Consequently, this process provides a simple way to achieve DSP of the surfaces of Bi-2212 crystals. This new DSP process realizes a remarkably improved reproducibility in fabricating Bi-2212 stacks that exhibit good current-voltage characteristics with a large hysteresis and multiple branches at T = 77 K.

  19. Atmospheric scavenging of hydrochloric acid. [from rocket exhaust

    NASA Technical Reports Server (NTRS)

    Knutson, E. O.; Fenton, D. L.

    1975-01-01

    The scavenging of hydrogen chloride from a solid rocket exhaust cloud was investigated. Water drops were caused to fall through a confined exhaust cloud and then analyzed to determine the amount of HCl captured during fall. Bubblers were used to measure HCl concentration within the chamber. The measured chamber HCl concentration, together with the measured HCl deposition on the chamber walls, accounted for 81 to 94% of the theoretical HCl. It was found that the amount of HCl captured was approximately one-half of that predicted by the Frossling correlation. No effect of humidity was detected through a range of 69-98% R.H.. The scavenging of HCl from a solid rocket exhaust cloud was calculated using an idealized Kennedy Space Center rain cycle. Results indicate that this cycle would reduce the cloud HCl concentration to 20.6% if its value in the absence of rain.

  20. Hydrochloric Acid and the Chlorine Budget of the Lower Stratosphere

    NASA Technical Reports Server (NTRS)

    Webster, C.; May, R.; Jaegle, L.; Hu, H.; Sander, S.; Gunson, M.; Toon, G.; Russell, J., III; Stimpfle, R.; Koplow, J.; Salawitch, R.; Michelsen, H.

    1994-01-01

    Concentrations of hc1 measured in the lower stratosphere in 1993 by the ALIAS instrument on the ER-2 aircraft reveal that only 40% of inorganic chlorine (CL sub y, inferred from in situ measurements of organic chlorinated source gases) is present as HC1, significantly lower than model predictions.

  1. Hydrochloric acid and the chlorine budget of the lower statosphere

    NASA Technical Reports Server (NTRS)

    Webster, C. R.; May, R. D.; Jaegle, L.; Hu, H.; Sander, S. P.; Gunson, M. R.; Toon, G. C.; Russell, J. M., III; Stimpfle, R. M.; Koplow, J. P.

    1994-01-01

    Concentrations of HCl measurements in the lower stratosphere in 1993 by the ALIAS instrument on the ER-2 aircraft reveal that only 40% of inorganic chlorine (Cl(y), inferred from in situ measurements of organic chlorinated sources gases) is present as HCl, significantly lower than model predictions. Although the sum of measured HCl, ClO and ClONO2, the latter inferred from measurements of ClO and NO2 equals Cl(y) to within the incertainty of measurement, it is systematically less than Cl(y) by 30-50%. This discrepancy suggests that concentrations of ClONO2 may exceed those of HC; near 20 km altitude, consistent with a slower photolysis rate for ClONO2 than calculated using recommended cross sections. Comparison of profiles of HCl measured during 1992 and 1193 at mid-latitudes by balloon (BLISS and MARKIV), space shuttle (ATMOS), and satellite (HALOE) instruments with the aircraft data reveal an apparent pressure dependence to the HCl to Cl(y) ratio, consistent with a factor of 3-10 reduction in the photolysis rate for ClONO2 at ER-2 altitudes. However, the diurnal variation of ClO is well-simulated by models using the recommended photolysis rate, and simulations measurements of ClONO2 and HCl at mid-latitudes by ATMOS and MARKIV report HCl (HCL+ ClONO2) ratios greater than or equal to 50%. Premliminary measurements by ALIAS in the southern hemisphere report HCl/Cl(y) values of about 75%.

  2. Polarimetry of major Uranian moons at the 6-m telescope

    NASA Astrophysics Data System (ADS)

    Afanasiev, V. L.; Rosenbush, V. K.; Kiselev, N. N.

    2014-04-01

    We present the results of polarimetric observations of the icymoons of Uranus (Ariel, Titania, Oberon, and Umbriel) performed at the 6-m BTA telescope of the SAO RAS with the SCORPIO-2 focal reducer within the phase angle range of . The parameters of the negative polarization branch (referred to the scattering plane) are obtained in the V filter: for Ariel the maximum branch depth of P min ≈ -1.4% is reached at the phase angle of α min ≈ 1°; for Titania P min ≈ -1.2%, ; for Oberon P min ≈ -1.1%, . For Umbriel the polarization minimum was not reached: for the last measurement point at , polarization amounts to -1.7%. The declining P min and shifting αmin towards larger phase angles correlate with a decrease of the geometric albedo of the Uranian moons. There is no longitudinal dependence of polarization for the moons within the observational errors which indicates a similarity in the physical properties of the leading and trailing hemispheres. The phase-angle dependences of polarization for the major moons of Uranus are quite close to those observed in the group of small trans-Neptunian objects (Ixion, Huya, Varuna, 1999 DE9, etc.), which are characterized by a large gradient of negative polarization, about -1% per degree in the phase-angle range of.

  3. Acid soldering flux poisoning

    MedlinePlus

    The harmful substances in soldering fluxes are called hydrocarbons. They include: Ammonium chloride Rosin Hydrochloric acid Zinc ... Lee DC. Hydrocarbons. In: Marx JA, Hockberger RS, Walls RM, et ... Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ...

  4. Identification of Methylated Deoxyadenosines in Genomic DNA by dA6m DNA Immunoprecipitation

    PubMed Central

    Koziol, Magdalena J.; Bradshaw, Charles R.; Allen, George E.; Costa, Ana S.H.; Frezza, Christian

    2017-01-01

    dA6m DNA immunoprecipitation followed by deep sequencing (DIP-Seq) is a key tool in identifying and studying the genome-wide distribution of N6-methyldeoxyadenosine (dA6m). The precise function of this novel DNA modification remains to be fully elucidated, but it is known to be absent from transcriptional start sites and excluded from exons, suggesting a role in transcriptional regulation (Koziol et al., 2015). Importantly, its existence suggests that DNA might be more diverse than previously believed, as further DNA modifications might exist in eukaryotic DNA (Koziol et al., 2015). This protocol describes the method to perform dA6m DNA immunoprecipitation (DIP), as was applied to characterize the first dA6m methylome analysis in higher eukaryotes (Koziol et al., 2015). In this protocol, we describe how genomic DNA is isolated, fragmented and then DNA containing dA6m is pulled down with an antibody that recognizes dA6m in genomic DNA. After subsequent washes, DNA fragments that do not contain dA6m are eliminated, and the dA6m containing fragments are eluted from the antibody in order to be processed further for subsequent analyses. Background This protocol was developed in order to identify regions in the genome that contain dA6m. It can be used to detect dA6m in different genomes. As a guideline, this protocol was established from existing approaches used to detect adenosine methylation in RNA (Dominissini et al., 2013). We developed this protocol and adapted it for the detection of dA6m in DNA, rather than detecting adenosine methylation RNA. This was required, as no protocol was available at that time to allow the genome-wide identification of dA6m in eukaryotic DNA. PMID:28180135

  5. Segregation of Alloying Components of Steels R6M5K5 and R6M5K5-MP and its Relation with their Structure and Properties

    NASA Astrophysics Data System (ADS)

    Kremnev, L. S.; Sapronov, I. Yu.

    2014-03-01

    The distribution of alloying components in local regions of the martensitic matrix of high-speed steels R6M5K5 and R6M5K5-MP produced by the conventional process and by the method of powder metallurgy is studied. It is shown that the alloying components are segregated in the martensite, and the segregation is related to the content of retained austenite after hardening and to the microhardness and heat resistance of the steels after final heat treatment.

  6. Recovery of Pd(II) from hydrochloric solution using polyallylamine hydrochloride-modified Escherichia coli biomass.

    PubMed

    Park, Jiyeong; Won, Sung Wook; Mao, Juan; Kwak, In Seob; Yun, Yeoung-Sang

    2010-09-15

    A new type of biosorbent able to bind anionic metals was developed by cross-linking of waste biomass Escherichia coli with polyallylamine hydrochloride (PAH). The PAH-modified biomass was investigated for the removal and recovery of Pd(II), in the chloro-complex form, from aqueous solution. The performance of the PAH-modified biomass was evaluated in terms of the following parameters: the solution pH, contact time and initial metal concentration. In the pH edge experiments, the uptake of Pd(II) increased with increasing pH. Pd(II) biosorption proceeded rapidly in the first 10 min, with almost complete equilibrium being achieved within 60 min. Moreover, the isotherm data showed that the maximum uptakes of Pd(II) were 265.3mg/g at pH 3 and 212.9 mg/g at pH 2, respectively. After incineration of the Pd-loaded PAH-modified biomass, metallic palladium was recovered in the ash. X-ray photoelectron spectroscopy (XPS) results confirmed that the palladium was recovered in two valency states: zero-valent and divalent palladium (as PdO). Therefore, we concluded that PAH-modified biomass is a useful and cost-effective biosorbent for the recovery of anionic precious metals as chloro-complex solutions containing hydrochloric acid produced from metal refining processes.

  7. Abundant DNA 6mA methylation during early embryogenesis of zebrafish and pig

    PubMed Central

    Liu, Jianzhao; Zhu, Yuanxiang; Luo, Guan-Zheng; Wang, Xinxia; Yue, Yanan; Wang, Xiaona; Zong, Xin; Chen, Kai; Yin, Hang; Fu, Ye; Han, Dali; Wang, Yizhen; Chen, Dahua; He, Chuan

    2016-01-01

    DNA N6-methyldeoxyadenosine (6mA) is a well-known prokaryotic DNA modification that has been shown to exist and play epigenetic roles in eukaryotic DNA. Here we report that 6mA accumulates up to ∼0.1–0.2% of total deoxyadenosine during early embryogenesis of vertebrates, but diminishes to the background level with the progression of the embryo development. During this process a large fraction of 6mAs locate in repetitive regions of the genome. PMID:27713410

  8. Quantitative Measurements of Daytime Near Infrared Sky Brightness at the AEOS 3.6 m Telescope

    DTIC Science & Technology

    2014-09-01

    Quantitative measurements of daytime near infrared sky brightness at the AEOS 3.6 m telescope Michael Hart, Stuart Jefferies Douglas Hope, James...HI 96753 ABSTRACT We report daytime sky brightness measurements recorded in the near infrared from the 3.6 m AEOS telescope . Measurements were made...techniques for high-resolution imaging of satellites from the AEOS telescope . 1 MOTIVATION At first glance it would appear that imaging in the near

  9. A review of the safety features of 6M packagings for DOE programs

    SciTech Connect

    Not Available

    1988-12-01

    This report, prepared by a US Department of Energy (DOE) Task Force and organized for clarity into two-page modules, argues that the US Department of Transportation (DOT) Specification-6M packagings (hereafter referred to as 6M packaging, or simply 6M) merit continued DOE use and, if necessary, DOE certification. This report is designed to address the specific requirements of a Safety Analysis Report for Packaging (SARP). While not a SARP, this report constitutes a compilation of all available documentation on 6M packagings. The authors individually, and the Task Force collectively, believe their investigation provides justification for the continued use of 6M packagings because they meet criteria for quality assurance and for safety under normal and accident conditions as defined by the US Nuclear Regulatory Commission (NRC) regulations. This report may be used by DOE managers to assist in deliberations on future requirements for 6M packagings as they are required to support DOE programs. For the purpose of ready evaluation, this report includes categorical topics found in Nuclear Regulatory Guide 7.9, the topical guideline for SARPs. The format, however, will (it is hoped) pleasantly surprise customary reader expectations. For, while maintaining categorical headings and subheadings found in SARPs as a skeleton, the Task Force chose to adopt the document design principles developed by Hughes Aircraft in the 1960s, ''Sequential Thematic Organization of Publications'' (STOP). 37 figs.

  10. 49 CFR 173.158 - Nitric acid.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid...

  11. 49 CFR 173.158 - Nitric acid.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid...

  12. 49 CFR 173.158 - Nitric acid.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid...

  13. 49 CFR 173.158 - Nitric acid.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid...

  14. 49 CFR 173.158 - Nitric acid.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid...

  15. AUTHORIZING THE DOT SPECIFICATION 6M PACKAGING FOR CONTINUED USE AT THE SAVANNAH RIVER SITE

    SciTech Connect

    Watkins, R.; Loftin, B.; Hoang, D.

    2010-03-04

    The U.S. Department of Transportation (DOT) Specification 6M packaging was in extensive use for more than 40 years for in-commerce shipments of Type B quantities of fissile and radioactive material (RAM) across the USA, among the Department of Energy (DOE) laboratories, and between facilities in the DOE production complex. In January 2004, the DOT Research and Special Programs Administration (RSPA) Agency issued a final rule in the Federal Register to ammend requirements in the Hazardous Materials Regulations (HMR) pertaining to the transportation of radioactive materials. The final rule became effective on October 1, 2004. One of those changes discontinued the use of the DOT specification 6M, along with other DOT specification packagings, on October 1, 2008. A main driver for the change was due to the fact that 6M specification packagings were not supported by a Safety Analysis Report for Packagings (SARP) that was compliant with Title 10 of the Code of Federal Regulations (CFR) Part 71 (10 CFR 71). The regulatory rules for the discontinued use have been edited in Title 49 of the CFR Parts 100-185, 2004 edition and thereafter. Prior to October 1, 2008, the use of the 6M within the boundaries of the Savannah River Site (SRS), called an onsite transfer, was governed by an onsite transportation document that referenced 49 CFR Parts 100-185. SRS had to develop an Onsite Safety Assessment (OSA) which was independent of 49 CFR in order to justify the continued use of the DOT Specification 6M for the transfer of radioactive material (RAM) at the SRS after October 1, 2008. This paper will discuss the methodology for and difficulties associated with authorizing the DOT Specification 6M Packaging for continued use at the Savannah River Site.

  16. Safety analysis report for packaging: the ORNL DOT specification 6M - special form package

    SciTech Connect

    Schaich, R.W.

    1982-07-01

    The ORNL DOT Specification 6M - Special Form Package was fabricated at the Oak Ridge Nation al Laboratory (ORNL) for the transport of Type B solid non-fissile radioactive materials in special form. The package was evaluated on the basis of tests performed by the Dow Chemical Company, Rocky Flats Division, on the DOT-6M container and special form tests performed on a variety of stainless steel capsules at ORNL by Operations Division personnel. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of Type B quantities in special form of non-fissile radioactive materials.

  17. Complete α6 m Corrections to the Ground State of H2

    NASA Astrophysics Data System (ADS)

    Puchalski, Mariusz; Komasa, Jacek; Czachorowski, Paweł; Pachucki, Krzysztof

    2016-12-01

    We perform the calculation of all relativistic and quantum electrodynamic corrections of the order of α6 m to the ground electronic state of a hydrogen molecule and present improved results for the dissociation and the fundamental transition energies. These results open the window for the high-precision spectroscopy of H2 and related low-energy tests of fundamental interactions.

  18. Enclosure design for the ARIES 3.6m optical telescope

    NASA Astrophysics Data System (ADS)

    Pandey, A. K.; Shukla, Vishal; Bangia, Tarun; Raskar, R. D.; Kulkarni, R. R.; Ghanti, A. S.

    2012-09-01

    A 3.6-m, f/9 optical telescope is planned to be installed at Devasthal, India (Latitude:29° 21' 40'' N, Longitude: 79° 41' 04'' E, Altitude: 2450 m above msl). The telescope has Cassegrain focus and alt-azimuth mount. The design of the telescope enclosure and the auxiliary building includes a fixed base enclosure, a telescope pier, a rotating dome structure, an auxiliary building, ventilation and component handling systems. The design is optimized for thermal, mechanical, structural, as well as for telescope installation and maintenance requirements. The design aims to provide seeing limited images within the telescope enclosure. This paper presents design of the 3.6m telescope enclosure.

  19. Factory verification results and status of 3.6 m Devasthal Optical Telescope

    NASA Astrophysics Data System (ADS)

    Kumar, Brijesh

    Considering the need and potential of establishing a moderate size optical telescope with spectroscopic capability at the geographical longitude of India, a 3.6m optical telescope with active optics technology is being installed at Devasthal, Nainital. This telescope will have instruments providing high resolution spectral and seeing-limited imaging capabilities at visible and near-infrared bands. The 3.6m DOT can be used to optical studies of a wide variety of astronomical topics including follow-up studies of sources identified in the radio region by GMRT and UV/X-ray by ASTROSAT. In this contribution, we present telescope performance verification results obtained from the sky tests which were carried out at the Factory in May 2012. The status of telescope will also be presented.

  20. REMOVAL OF CHLORIDE FROM ACIDIC SOLUTIONS USING NO2

    SciTech Connect

    Visser, A; Robert Pierce, R; James Laurinat, J

    2006-08-22

    Chloride (Cl{sup -}) salt processing in strong acids is used to recycle plutonium (Pu) from pyrochemical residues. The Savannah River National Laboratory (SRNL) is studying the potential application of nitrogen dioxide (NO{sub 2}) gas to effectively convert dissolved pyrochemical salt solutions to chloride-free solutions and improve recovery operations. An NO{sub 2} sparge has been shown to effectively remove Cl{sup -} from solutions containing 6-8 M acid (H{sup +}) and up to 5 M Cl{sup -}. Chloride removal occurs as a result of the competition of at least two reactions, one which is acid-dependent. Below 4 M H+, NO2 reacts with Cl- to produce nitrosyl chloride (ClNO). Between 6 M and 8 M H{sup +}, the reaction of hydrochloric acid (HCl) with nitric acid (HNO{sub 3}), facilitated by the presence of NO{sub 2}, strongly affects the rate of Cl{sup -} removal. The effect of heating the acidic Cl{sup -} salt solution without pre-heating the NO{sub 2} gas has minimal effect on Cl{sup -} removal rates when the contact times between NO{sub 2} and the salt solution are on the order of seconds.

  1. Dichroic circular polarization analyzer for the Main Stellar Spectrograph of the 6-m telescope

    NASA Astrophysics Data System (ADS)

    Chountonov, G. A.

    2016-10-01

    We describe a dichroic circular polarization analyzer with a double image slicer providing seven slices for each polarization developed for the Main Stellar Spectrograph of the 6-m telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences. The analyzer is designed for measuring stellar magnetic fields using the Zeeman effect and represents an upgraded version compared to earlier used polarization analyzers. We report the parameters of the analyzer and estimate the accuracy of measurements performed with it.

  2. Construction of 3.6m ARIES telescope enclosure with eccentric pier at Devasthal, Nainital

    NASA Astrophysics Data System (ADS)

    Bangia, Tarun

    Space optimized enclosure with eccentric pier for 3.6m ARIES telescope presents construction challenges at the unique observing site of Devasthal, Nainital, India. Enclosure comprises of about 16.5m diameter and 14m high insulated steel framed cylindrical dome rotating on a 14m high stationery dome supporting structure and a 24m × 12m extension structure building for accommodating aluminizing plant and ventilation system etc. Great deal of manual and mechanical excavation was carried out at the rocky site using rock breaking and JCB machines. Foundation bolts for columns of dome supporting structure and extension structure building were grouted after alignment with total station. A 7m diameter hollow cylindrical pier isolated from other structures and 1.85m eccentric with dome center designed due to space limitation at site is being casted for mounting 150 MT mass of the largest 3.6m telescope in the country. A 7m diameter template was fabricated for 3.6m pier top. Most of enclosure components are manufactured and tested in works before assembly/erection at site. Dome drive was tested with dummy loads using VVVF drive with 6 drive and 12 idler wheel assemblies at works to simulate dome weight and smooth operation before erection at site. A 4.2m wide motorized windscreen is being manufactured with a special grade synthetic fabric to withstand wind speed up to 15m/s.

  3. BCL6 mRNA Expression Level in Invasive Duct Carcinoma not otherwise Specified

    PubMed Central

    Badr, Eman; Masoud, Eman; Eldien, Marwa Serag

    2016-01-01

    Introduction B-Cell Lymphoma 6 (BCL6) has an oncogenic role in tumourigenesis of various malignancies. It represses genes involved in terminal differentiation and plays complementary role with Signal Transducer and Activator of Transcription 3 (STAT3) in triple-negative breast cancer cellular function. Aim To evaluate the expression of BCL6 in cancer breast and determine its correlation with the clinico-pathological features including the molecular subtype of breast carcinoma. Materials and Methods This prospective case control study was carried out on 150 patients, divided into 100 cases of invasive duct carcinoma not otherwise specified and 50 benign breast lesions including fibroadenoma and fibrocystic disease. Fresh tissues were excised, which were then subjected to RNA extraction. The BCL6 mRNA level was assessed using real-time reverse transcription Polymerase Chain Reaction (PCR). Results There was a significant higher levels of BCL6 mRNA in malignant cases compared to benign ones (p<0.001). The level of BCL6 mRNA was higher in cases showing advanced tumor stage (p<0.04), triple negative subtype and associated in situ component (p<0.001) compared to cases with an early stage, luminal or Her 2-neu positive subtypes and those lacking in situ component. Conclusion BCL6 is up-regulated in breast cancer and is associated with poor prognostic features such as advanced stage and triple negative molecular subtype. BCL6 inhibitors might be considered as targeted therapy for breast cancer. PMID:28208987

  4. EVALUATION OF RADIOLYSIS INDUCED HYDROGEN GENERATION IN DOT 6M DRUMS FROM INTEC

    SciTech Connect

    Vinson, D

    2007-06-18

    Three DOT 6M 30-gallon drums are scheduled to be shipped from the Idaho Nuclear Technology Engineering Center (INTEC) at the Idaho National Laboratory (INL) to L-Area at the Savannah River Site (SRS). These three drums contain radioactive materials that resulted from the material recovery effort following a small explosion that had occurred in the Idaho Chemical Processing Plant (ICPP) hot chemistry laboratory (HCL). In support of the shipment and subsequent storage of the three DOT 6M drums, an evaluation of the potential for molecular hydrogen production in the drums has been completed and documented herein. The potential sources of hydrogen evaluated in the current report include radiolytic decomposition of polymeric materials in the DOT 6M drums No.3031 and No.3598 and the radiolytic decomposition of water in drum No.20102. No other potential sources have been identified based upon reported drum contents and packaging configuration. A parametric approach was used to evaluate the maximum quantity of molecular hydrogen that can be expected to evolve in two DOT 6M 30-gallon drums in support of receipt and subsequent interim storage prior to canyon processing. These drums are two of three drums scheduled for shipment from INTEC to SRS as part of the decommissioning effort of the INTEC facility. The three DOT 6M drums will be received at L-Area in SRS and stored for up to 13-years prior to final disposition at HB-Line in 2020. Results of the current analysis do not include parametric analysis of drum No.20102 containing 114/133 SAL (salvage) which contains UO{sub 3} powder. This drum has not been identified as containing polymeric materials and a conservative calculation indicates that the maximum gross molecular hydrogen production due to the radiolysis of adsorbed moisture would yield a production rate of 5.1-cm{sup 3}/yr, driven primarily by the large surface are to volume ratio of the oxide powder. The remaining two drums, No.3031 and No.3598 contain polymer

  5. Astrobo: Towards a new observatory control system for the Garching Observatory 0.6m

    NASA Astrophysics Data System (ADS)

    Schweyer, T.; Jarmatz, P.; Burwitz, V.

    2016-12-01

    The recently installed Campus Observatory Garching (COG) 0.6m telescope features a wide array of instruments, including a wide-field imager and a variety of spectrographs. To support all these different instruments and improve time usage, it was decided to develop a new control system from scratch, that will be able to safely observe autonomously as well as manually (for student lab courses). It is built using an hierarchical microservice architecture, which allows well-specified communication between its components regardless of the programming language used. This modular design allows for fast prototyping of components as well as easy implementation of complex instrumentation control software.

  6. Structural Testing of a 6m Hypersonic Inflatable Aerodynamic Decelerator System

    NASA Technical Reports Server (NTRS)

    Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.

    2015-01-01

    NASA is developing low ballistic coefficient technologies to support the Nations long-term goal of landing humans on Mars. Current entry, decent, and landing technologies are not practical for this class of payloads due to geometric constraints dictated by current and future launch vehicle fairing limitations. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are being developed to circumvent this limitation and are now considered a leading technology to enable landing of heavy payloads on Mars. At the beginning of 2014, a 6m diameter HIAD inflatable structure with an integrated flexible thermal protection system (TPS) was subjected to a static load test series to verify its structural performance under flight-relevant loads. The inflatable structure was constructed into a 60 degree sphere-cone configuration using nine inflatable torus segments composed of fiber-reinforced thin films. The inflatable tori were joined together using adhesives and high-strength textile woven structural straps. These straps help distribute the load throughout the inflatable structure. The 6m flexible TPS was constructed using multiple layers of high performance materials that are designed to protect the inflatable structure from heat loads that would be seen in flight during atmospheric entry. A custom test fixture was constructed to perform the static load test series. The fixture consisted of a round structural tub with enough height and width to allow for displacement of the HIAD test article as loads were applied. The bottom of the tub rim had an airtight seal with the floor. The rigid centerbody of the HIAD was mounted to a pedestal in the center of the structural tub. Using an impermeable membrane draped over the HIAD test article, an airtight seal was created with the top rim of the static load tub. This seal allowed partial vacuum to be pulled beneath the HIAD resulting in a uniform static pressure load applied to the outer surface. Using this technique, the test article

  7. Long Periodic Helimagnetic Ordering in CrM 3S6 (M = Nb and Ta)

    NASA Astrophysics Data System (ADS)

    Kousaka, Y.; Ogura, T.; Zhang, J.; Miao, P.; Lee, S.; Torii, S.; Kamiyama, T.; Campo, J.; Inoue, K.; Akimitsu, J.

    2016-09-01

    We report long periodic chiral helimagnetic orderings in ferromagnetic inorganic compounds CrM 3S6 (M = Nb and Ta) with a chiral space group of P6322. Magnetization in polycrystalline samples and high resolution powder neutron diffraction were measured. Our powder neutron diffraction measurements in CrM 3S6 successfully separated nuclear and magnetic satellite peaks, having the period of hundreds of angstroms along the c— axis. Therefore, we propose that the magnetic ordering in ferromagnetic CrM3S6 is not ferromagnetic, but long periodic chiral helimagnetic ordering.

  8. EMCCD SPECKLE INTERFEROMETRY WITH THE 6 m TELESCOPE: ASTROMETRIC MEASUREMENTS, DIFFERENTIAL PHOTOMETRY, AND ORBITS

    SciTech Connect

    Docobo, Jose A.; Tamazian, Vakhtang S.; Melikian, Norair D. E-mail: vakhtang.tamazian@usc.e E-mail: nmelikia@bao.sci.a

    2010-10-15

    Results of the EMCCD-based speckle interferometric observations and differential photometry for 46 visual binaries obtained in 2007 June and July with the 6 m telescope of the Special Astrophysical Observatory (Russia) are presented. First preliminary orbits for COU 401, COU 1281, and COU 1037 as well as improved orbits for CHR 137, COU 100, COU 1136, COU 798, CHR 51, CHR 55, COU 315, COU 206, and ADS 13961, along with their dynamical mass estimates, are reported. On the basis of dynamical parallax information, first distance estimates for COU 100, COU 1136, COU 798, COU 206, and COU 1037 are calculated.

  9. Zn/gelled 6 M KOH/O 2 zinc-air battery

    NASA Astrophysics Data System (ADS)

    Mohamad, A. A.

    The gel electrolyte for the zinc-air cell was prepared by mixing hydroponics gel with a 6 M potassium hydroxide aqueous solution. The self-discharge of cells was characterized by measuring the open-circuit voltage. The effect of a discharge rate of 50 mA constant current on cell voltage and plateau hour, as well as the voltage-current and current density-power density were measured and analysed. The electrode degradation after discharge cycling was characterized by structural and surface methods. The oxidation of the electrode surface further blocked the utilization of the Zn anode and was identified as a cause for the failure of the cell.

  10. Study of new optical transients using 3.6m DOT at Devasthal Nainital

    NASA Astrophysics Data System (ADS)

    Pandey, S. B.

    2016-12-01

    Longitudinal advantage of Indian sub-continent makes the recently installed 3.6m telescope as a novel facility for astronomical observations, specially, to study time critical events, i.g. transients. This telescope along with the first generation back-end instruments could be efficiently used to study new transients discovered using a global network of robotic survey telescopes. Study of new transients as a part of time domain astronomy will play a key role in near future along with the upcoming multi-wavelength facilities to explore the underlying physics behind these sources.

  11. ADAM low- and medium-resolution spectrograph for 1.6-m AZT-33IK telescope

    NASA Astrophysics Data System (ADS)

    Afanasiev, V. L.; Dodonov, S. N.; Amirkhanyan, V. R.; Moiseev, A. V.

    2016-10-01

    We describe the design of a suspended low- and medium-resolution spectrograph ( R ≈ 300-1300) designed and made at the Special Astrophysical Observatory of the Russian Academy of Sciences for the 1.6-m AZT-33IK telescope of Sayan Observatory of the Institute of Solar-Terrestrial Physics of the Siberian Branch of the Russian Academy of Sciences. We report the results of laboratory measurements of the parameters of the instrument and tests performed on the 1-m Zeiss-1000 telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences. We measured the total quantum efficiency of the "spectrograph + telescope + detector" system on AZT-33IK telescope, which at its maximum reaches 56%. Such a hight transparency of the spectrograph allows it to be used with the 1.6-m telescope to determine the types and redshifts of objects with integrated magnitudes m AB ≈ 20-21, and this result was confirmed by actual observations.

  12. Characteristic of a novel composite inorganic polymer coagulant-PFAC prepared by hydrochloric pickle liquor.

    PubMed

    Lan, Wei; Qiu, Huiqin; Zhang, Jie; Yu, Yanjing; Yang, Kailiang; Liu, Zhongzhe; Ding, Guoji

    2009-02-15

    A composite inorganic polymer coagulant, polyferric aluminum chloride (PFAC) was prepared by using hydrochloric pickle liquor and calcium aluminate as main materials. The optimum conditions for preparing PFAC with the hydrochloric pickle liquor and the calcium aluminate were studied. The coagulation performance of PFAC was investigated by studying the turbidity, COD, total phosphate (TP) and NH(3)-N removal efficiency in municipal sewage treatment. Results indicated that the effective composition, basicity (simplified as B, B=[OH]/(3[Fe(T)+Al(T)])x100%), coagulation performance and stability of PFAC were affected by calcium aluminate dosage, reaction time, reaction temperature and stabilizing agents. The COD and turbidity removal efficiency of PFAC was better than that of PFS and FeCl(3), and the TP and NH(3)-N removal efficiency of PFAC was much better than that of PFS, FeCl(3) and PAC. PFAC not only possessed a good coagulation performance, but also had good stability when stored.

  13. Gas chromatographic determination of oxalic acid in foods.

    PubMed

    Ohkawa, H

    1985-01-01

    A new quantitative gas chromatographic (GC) method has been developed for the determination of oxalic acid in foods. Solid sample is extracted with water (soluble oxalic acid) or 2N hydrochloric acid (total oxalic acid) at room temperature. An aliquot of sample extract is evaporated to dryness, and the oxalic acid in the residue is methylated with 7% hydrochloric acid-methanol. The reaction mixture is extracted with chloroform, and dimethyl oxalate is quantitated by GC. Recovery of oxalic acid added to liquid samples averaged 100.6%; recoveries from extracts of solid samples were 96.2-99.5 and 97.2-100.1% for water and hydrochloric acid extractions, respectively. Results are shown for determination of oxalic acid in spinach and beverages. The technique is simple, rapid, and accurate, and small samples may be used. The limit of determination is 20 micrograms.

  14. Primary thermometry triad at 6 mK in mesoscopic circuits

    NASA Astrophysics Data System (ADS)

    Iftikhar, Z.; Anthore, A.; Jezouin, S.; Parmentier, F. D.; Jin, Y.; Cavanna, A.; Ouerghi, A.; Gennser, U.; Pierre, F.

    2016-09-01

    Quantum physics emerge and develop as temperature is reduced. Although mesoscopic electrical circuits constitute an outstanding platform to explore quantum behaviour, the challenge in cooling the electrons impedes their potential. The strong coupling of such micrometre-scale devices with the measurement lines, combined with the weak coupling to the substrate, makes them extremely difficult to thermalize below 10 mK and imposes in situ thermometers. Here we demonstrate electronic quantum transport at 6 mK in micrometre-scale mesoscopic circuits. The thermometry methods are established by the comparison of three in situ primary thermometers, each involving a different underlying physics. The employed combination of quantum shot noise, quantum back action of a resistive circuit and conductance oscillations of a single-electron transistor covers a remarkably broad spectrum of mesoscopic phenomena. The experiment, performed in vacuum using a standard cryogen-free dilution refrigerator, paves the way towards the sub-millikelvin range with additional thermalization and refrigeration techniques.

  15. Structure and wear resistance of R6M5 steel based coatings

    NASA Astrophysics Data System (ADS)

    Gnyusov, S. F.; Ignatov, A. A.; Durakov, V. G.

    2010-08-01

    Features of the structure of R6M5 steel based coatings obtained by multiscan electron-beam fusion of a hardening composition in vacuum have been studied. It is established that the carbide subsystem of the hardened layer is characterized by a multimodal distribution of carbide particles with d 1 = 3.8 μm, d 2 = 0.65 μm, and d 3 < 0.25 μm. The volume fraction of M6C secondary carbide and retained matrix austenite can be controlled within broad limits by varying thermal parameters of the electron-beam fusion. An increase in the retained austenite fraction in the coating leads to improved wear resistance due to the γ → α' marten-site transformation during friction and the presence of dispersed secondary carbides inside the matrix grains.

  16. Detecting voids in a 0.6 m coal seam, 7 m deep, using seismic reflection

    USGS Publications Warehouse

    Miller, R.D.; Steeples, D.W.

    1991-01-01

    Surface collapse over abandoned subsurface coal mines is a problem in many parts of the world. High-resolution P-wave reflection seismology was successfully used to evaluate the risk of an active sinkhole to a main north-south railroad line in an undermined area of southeastern Kansas, USA. Water-filled cavities responsible for sinkholes in this area are in a 0.6 m thick coal seam, 7 m deep. Dominant reflection frequencies in excess of 200 Hz enabled reflections from the coal seam to be discerned from the direct wave, refractions, air wave, and ground roll on unprocessed field files. Repetitive void sequences within competent coal on three seismic profiles are consistent with the "room and pillar" mining technique practiced in this area near the turn of the century. The seismic survey showed that the apparent active sinkhole was not the result of reactivated subsidence but probably erosion. ?? 1991.

  17. The 3.6m Indo-Belgian Devasthal Optical Telescope: performance results on site

    NASA Astrophysics Data System (ADS)

    Ninane, Nathalie; Bastin, Christian; Flebus, Carlo; Kumar, Brijesh

    2016-07-01

    AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Devasthal, Nainital in central Himalayan region) of the 3.6 m Indo-Belgian Devasthal Optical Telescope (IDOT). The telescope has Ritchey-Chrétien optical configuration with one axial and two side Cassegrain ports. The meniscus primary mirror is active and it is supported by pneumatic actuators. The azimuth axis system is equipped with hydrostatic bearing. After successful factory acceptance at AMOS SA, the telescope has been dismounted, packed, transported, and remounted on site. This paper provides the final performances (i.e. image quality, pointing and tracking) measured during sky tests at Devasthal Observatory.

  18. Queue observing at the Observatoire du Mont-Mégantic 1.6-m telescope

    NASA Astrophysics Data System (ADS)

    Artigau, Étienne; Lamontagne, Robert; Doyon, René; Malo, Lison

    2010-07-01

    Queue planning of observation and service observing are generally seen as specific to large, world-class, astronomical observatories that draw proposal from a large community. One of the common grievance, justified or not, against queue planning and service observing is the fear of training a generation of astronomers without hands-on observing experience. At the Observatoire du Mont-Mégantic (OMM) 1.6-m telescope, we are developing a student-run service observing program. Queue planning and service observing are used as training tools to expose students to a variety of scientific project and instruments beyond what they would normally use for their own research project. The queue mode at the OMM specifically targets relatively shallow observations that can be completed in less than a few hours and are too short to justify a multi-night classical observing run.

  19. Structural heterogeneity of 6 M GdmCl-denatured proteins: implications for the mechanism of protein folding.

    PubMed

    Chang, Jui-Yoa

    2009-10-13

    An in vitro experiment with protein folding is typically initiated with 6 M GdmCl-denatured proteins, which are generally considered fully unfolded. However, studies conducted by various laboratories have shown that many 6 M GdmCl-denatured proteins are structurally heterogeneous and still retain nativelike residual structures. The extent of conformational heterogeneity of the 6 M GdmCl-denatured protein has significant implications for the folding landscape as well as the interpretation of the observed early stage folding mechanism. Using the method of disulfide scrambling, we are able to gain rough insight into the diverse structural properties of 6 M GdmCl-denatured proteins. It demonstrates that most 6 M GdmCl-denatured proteins are approximately fully denatured, but partially unfolded. Most of them comprise diverse conformational isomers. We review here the cumulative evidence obtained from various laboratories and also provide experimental data obtained in our laboratory.

  20. Chemical and structural properties of sweet potato starch treated with organic and inorganic acid.

    PubMed

    Babu, A Surendra; Parimalavalli, R; Jagannadham, K; Rao, J Sudhakara

    2015-09-01

    In the present study sweet potato starch was treated with hydrochloric acid or citric acid at 1 or 5 % concentration and its properties were investigated. Citric acid treatment resulted higher starch yield. Water holding capacity and water absorption index was increased with increased acid concentration. Emulsion properties improved at 5 % acid concentration. The DE value of acid-thinned sweet potato starches was ranged between 1.93 and 3.76 %. Hydrochloric acid treated starches displayed a higher fraction of amylose. X-ray diffraction (XRD) study revealed that all the starches displayed C-type crystalline pattern with varied crystallinity. FT-IR spectra perceived a slight change in percentage intensity of C-H stretch of citric acid modified starches. Starch granules tended to appear less smooth than the native starch granules after acid treatment in Scanning Electron Micrographs (SEM) with granule size ranging between 8.00 and 8.90 μm. A drastic decrease in the pasting profile was noticed in hydrochloric acid (5 %) treated starch. While 5 % citric acid treated starch exhibited higher pasting profile. Differential Scanning Calorimeter (DSC) showed that peak and conclusion gelatinisation temperatures increased with increase in hydrochloric acid or citric acid concentration. Hence citric acid was found to mimic the hydrochloric acid with some variation which suggests that it may have promising scope in acid modification.

  1. The selective leaching of uranium, vanadium and phosphorus from phosphate ore with hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Clements, J. L.; Prisbrey, K. A.; Taylor, P. R.

    1980-06-01

    The selective leaching of uranium, vanadium, and phosphorus from phosphate ore may be useful in by-product recovery. Experimental results have shown that it is possible to preferentially remove uranium from phosphate ore using dilute HCl (0.05 M). 93 pct of the uranium is leached within 90 min, leaving 94 pct of the phosphorus and 82 pct of the vanadium unattacked. Phosphorus may then be removed by increasing the pH. The apparent activation energies and orders for the leaching reactions were found. For uranium, the apparent order with respect to H+ is 1.05 and the apparent activation energy is 7750 J. The apparent order for the leaching of the vanadium minerals with respect to H+ is 1.93 and the apparent activation energy is 12800 J. The phosphorus reaction has an apparent order, with respect to H+, of 1.98 and an apparent activation energy of 10200 J. The uranium readsorbs at longer times. The readsorption reaction is a function of temperature, particle size, and H+ concentration. Two methods of selectivity analysis were used in the analysis of the data-end point analysis and initial rate analysis.

  2. HYDROLYSIS OF MTBE IN GROUND WATER SAMPLES PRESERVED WITIH HYDROCHLORIC ACID

    EPA Science Inventory

    Conventional sampling and analytical protocols have poor sensitivity for fuel oxygenates that are alcohols, such as TBA. Because alcohols tend to stay with the water samples, they are not efficiently transferred to the gas chromatograph for separation and analysis. A common tec...

  3. Separation of calcium-48 isotope by crown ether chromatography using ethanol/hydrochloric acid mixed solvent.

    PubMed

    Okumura, Shin; Umehara, Saori; Fujii, Yasuhiko; Nomura, Masao; Kaneshiki, Toshitaka; Ozawa, Masaki; Kishimoto, Tadafumi

    2015-10-09

    Benzo-18-crown-6 ether resin embedded in porous silica beads was synthesized and used as the packing material for chromatographic separation of (48)Ca isotope. The aim of the present work is to develop efficient isotope enrichment process for double β decay nuclide (48)Ca. To this end, ethanol/HCl mixed solvent was selected as the medium for the chromatographic separation. Adsorption of calcium on the resin was studied at different HCl concentrations and different ethanol mixing ratios in batch-wise experiments. A very interesting phenomenon was observed; Ca adsorption is controlled not by the overall HCl concentration of the mixed solvent, but by the initial concentration of added HCl solution. Calcium break-through chromatography experiments were conducted by using 75v/v% ethanol/25v/v% 8M HCl mixed solvent at different flow rates. The isotope separation coefficient between (48)Ca and (40)Ca was determined as 3.8×10(-3), which is larger than that of pure HCl solution system. Discussion is extended to the chromatographic HETP, height equivalent to a theoretical plate.

  4. Feasibility study of the application of existing techniques to remotely monitor hydrochloric acid in the atmosphere

    NASA Technical Reports Server (NTRS)

    Zwick, H.; Ward, V.; Beaudette, L.

    1973-01-01

    A critical evaluation of existing optical remote sensors for HCl vapor detection in solid propellant rocket plumes is presented. The P branch of the fundamental vibration-rotation band was selected as the most promising spectral feature to sense. A computation of transmittance for HCl vapor, an estimation of interferent spectra, the application of these spectra to computer modelled remote sensors, and a trade-off study for instrument recommendation are also included.

  5. The Effects of Thermal Pretreatment on Leaching of Yunnan Ilmenite with Hydrochloric Acid

    NASA Astrophysics Data System (ADS)

    Liu, Song-Li; Xiang, Jun-Yi

    2016-04-01

    The effects of thermal pretreatment on the leaching of Yunnan ilmenite ores were investigated from two aspects: the dissolution of iron and titanium, and the proportion of fine precipitations. The results indicate that high-temperature reduction or oxidization produces phase and structure transformations on ilmenite that facilitate the dissolution of iron, reduce the dissolution of titanium, and facilitate the hydrolysis of dissolved titanium. The results further indicate that oxidation at temperatures ranging from 1023 K (750 °C) to 1273 K (1000 °C) can significantly decrease the proportion of fine products. It is believed that the structure of oxidized ilmenite played an important role in minimizing the proportion of fine materials.

  6. ON THE USE OF HYDROCHLORIC ACID FOR DETERMINING SOLID-PHASE ARSENIC PARTITIONING IN ANOXIC SEDIMENTS

    EPA Science Inventory

    One of the challenges in assessing the current impact of the discharge of arsenic contaminated ground water into a surface water body is differentiating the arsenic ground water flux versus dissolution of in-place contaminated sediments. Results from a field study at a Superfund...

  7. 9 CFR 96.13 - Uncertified casings; disinfection with hydrochloric acid.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... solution, rinse them with water, and place them in a solution containing 81/2 pounds of sodium bicarbonate... from the sodium bicarbonate solution and wash them to remove the excess of bicarbonate. (Approved by the Office of Management and Budget under control number 0579-0015)...

  8. 9 CFR 96.13 - Uncertified casings; disinfection with hydrochloric acid.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... solution, rinse them with water, and place them in a solution containing 81/2 pounds of sodium bicarbonate... from the sodium bicarbonate solution and wash them to remove the excess of bicarbonate. (Approved by the Office of Management and Budget under control number 0579-0015)...

  9. Use of hydrochloric acid as a source of anions for prevention of milk fever.

    PubMed

    Goff, J P; Horst, R L

    1998-11-01

    Diets that contain high amounts of K induce milk fever by alkalinizing the blood of the cow, reducing the ability of homeostatic mechanisms to maintain normal blood concentrations of Ca. The addition of anions to the diet induces metabolic acidosis, which counteracts the alkalinizing effect of the high cation diets commonly fed to cows. Currently, anions are usually added as anionic salts, such as CaCl2 or MgSO4, and the pH of urine is often monitored to assess the degree of metabolic acidification resulting from the addition of anions to the diet. An alternative source of anions is HCl. In Experiment 1, the addition of HCl to the diet of cows that were not pregnant and not lactating significantly reduced the pH of urine and blood within 24 h. After HCl was removed from the diet, the pH of urine returned to baseline levels within 48 h. In Experiment 2, the inclusion of HCl into the prepartum ration of Jersey cows entering the third or greater lactation significantly reduced the incidence of milk fever from 63% of control cows to 11% of the treated cows and also reduced the degree of hypocalcemia that was experienced by the cows during the periparturient period. Plasma Ca concentrations at 0.5 d after calving were 5.33 +/- 0.52 and 6.69 +/- 0.51 mg/dl in the control and the HCl-treated cows, respectively. In Experiment 2, the prepartum consumption of the ration with HCl was greater than the consumption of the control ration. In liquid form, HCl remains dangerous to handle and corrosive to machinery. Commercial preparations of HCl mixed into common feed ingredients as a premix could offer an inexpensive and palatable alternative to anionic salts as a means of controlling the incidence of milk fever in dairy cows.

  10. A new online exhaust gas monitoring system in hydrochloric acid regeneration of cold rolling mills.

    PubMed

    Tuo, Long; Zheng, Xiang; Chen, Xiong

    2015-07-07

    Measuring the content of hydrogen chloride (HCl) in exhaust gas used to take time and energy. In this paper, we introduce a new online monitoring system which can output real-time data to the monitoring center. The system samples and cools exhaust gas, and after a series of processing, it will be analyzed by a specific instrument. The core part of this system is remote terminal unit (RTU) which is designed on Cortex-A8 embedded architecture. RTU runs a scaled-down version of Linux which is a good choice of OS for embedded applications. It controls the whole processes, does data acquisition and data analysis, and communicates with monitoring center through Ethernet. In addition, through a software developed for windows, the monitoring process can be remotely controlled. The new system is quite beneficial for steel industry to do environment monitoring.

  11. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... access openings used for inspection and maintenance of tanks, or unless otherwise specifically approved... gaskets. (c) Where special arrangements are approved by the Commandant (CG-ENG) to permit a pump...

  12. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... access openings used for inspection and maintenance of tanks, or unless otherwise specifically approved... gaskets. (c) Where special arrangements are approved by the Commandant (CG-522) to permit a pump...

  13. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... gaskets. (c) Where special arrangements are approved by the Commandant (CG-ENG) to permit a pump suction... during the cargo transfer operations, except installed electric or portable battery lights. Smoking...

  14. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... gaskets. (c) Where special arrangements are approved by the Commandant (CG-522) to permit a pump suction... during the cargo transfer operations, except installed electric or portable battery lights. Smoking...

  15. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... gaskets. (c) Where special arrangements are approved by the Commandant (CG-ENG) to permit a pump suction... during the cargo transfer operations, except installed electric or portable battery lights. Smoking...

  16. Sorption of uranium(VI) ions from hydrochloric acid and ammonium chloride solutions by anion exchangers

    SciTech Connect

    Pakholkov, V.S.; Denisova, L.A.; Rychkov, V.N.; Kurnosenko, N.A.

    1988-01-01

    The sorption of macroscopic quantities of uranium from solutions of UO/sub 2/Cl/sub 2/ containing HCl and NH/sub 4/Cl in concentrations from 0.0 to 6.0 M by the AV-17 x 8, AV-16G, EDE-10P, AN-31, AN-2F, AN22, and AN-251 anion exchangers has been investigated under static conditions. The sorption isotherms are described by an equation similar to Freundlich's equation: K/sub d/ = K tilde x C/sub eq/sup 1/z/ or log K/sub d/ = log K tilde + 1/z x log C/sub eq/. Equations describing the dependence of the sorbability (or K/sub d/) on the equilibrium concentration of uranium in the solution have been obtained with the aid of the least-squares method. Conclusions regarding the chemistry of the exchange of uranium ions on anion exchangers in chloride solutions have been drawn on the basis of the UV spectra of the original solutions and the IR spectra of the ion exchangers obtained in this work, as well as the established general laws governing sorption.

  17. HYDROLYSIS OF MTBE TO TBA IN GROUND WATER SAMPLES WITH HYDROCHLORIC ACID

    EPA Science Inventory

    Conventional sampling and analytical protocols have poor sensitivity for fuel oxygenates that are alcohols, such as tert-butyl alcohol (TBA). Because alcohols are miscible or highly soluble in water, alcohols are not efficiently transferred to the gas chromatograph for analysis....

  18. 9 CFR 96.13 - Uncertified casings; disinfection with hydrochloric acid.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... solution, rinse them with water, and place them in a solution containing 81/2 pounds of sodium bicarbonate... from the sodium bicarbonate solution and wash them to remove the excess of bicarbonate. (Approved...

  19. 9 CFR 96.13 - Uncertified casings; disinfection with hydrochloric acid.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... solution, rinse them with water, and place them in a solution containing 81/2 pounds of sodium bicarbonate... from the sodium bicarbonate solution and wash them to remove the excess of bicarbonate. (Approved...

  20. 9 CFR 96.13 - Uncertified casings; disinfection with hydrochloric acid.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... solution, rinse them with water, and place them in a solution containing 81/2 pounds of sodium bicarbonate... from the sodium bicarbonate solution and wash them to remove the excess of bicarbonate. (Approved...

  1. Characterization of friction in the 3.6m Devasthal optical telescope

    NASA Astrophysics Data System (ADS)

    Kumar, T. S.; Bastin, Christian; Kumar, Brijesh

    2016-07-01

    In this paper, we present the work on characterization of friction in the 3.6 m Devasthal optical telescope axes. The telescope azimuth axis is supported on a hydrostatic bearing while the altitude and rotator axes are supported on hydrodynamic bearings. Both altitude and azimuth axes are driven directly by high power BLDC motors and the rotator is driven by BLDC motor via a gearbox. This system is designed by AMOS, Belgium and tuned to achieve a tracking accuracy better than 0.1 arcsec RMS. Friction poses control related problems at such low speeds hence it is important to periodically characterize the behaviour at each axes. Compensation is necessary if the friction behaviour changes over the time and starts dominating the overall system response. For identifying friction each axis of telescope is rotated at different constant speeds and speed versus torque maps are generated. The LuGre model for friction is employed and nonlinear optimization is performed to identify the four static parameters of friction. The behaviour of friction for each axis is presented and the results are discussed.

  2. Imaging polarimetry of distant comets at the 6-m BTA telescope of the SAO RAS

    NASA Astrophysics Data System (ADS)

    Ivanova, Oleksandra; Afanasiev, Viktor; Rosenbush, Vera; Kiselev, Nikolai

    2016-07-01

    Results of the recent polarimetric observations of distant comets C/2013 V4 (Catalina), C/2014 A4 (SONEAR), C/2010 S1 (LINEAR), C/2010 R1 (LINEAR), and 29P/Schwassmann-Wachmann 1 are presented together with analysis of their photometry and spectroscopy. Observations were carried out at the 6-m telescope BTA of the SAO RAS with the multi-mode focal reducer SCORPIO-2 from 2011 to 2015. Comets were observed in the range of heliocentric distances from 4.2 to 7.0 AU and phase angles from 4.9 to 9.4 degrees. The maps of intensity and linear polarization over the coma are derived. The comets observed show a considerable activity at heliocentric distances far exceeding a zone of water sublimation. Molecular emissions were only detected in the spectra of comet 29P/Schwassmann-Wachmann 1. The linear polarization of distant comets with a high level of activity is the first ever measured at the heliocentric distances larger than 5 AU. The degree of linear polarization (from -2 to -3.7%) for these comets is significantly higher (in absolute value) than the typical value of the whole coma polarization (about -1.5 %) at the minimum of negative polarization branch for close to the Sun comets.

  3. Steel--Project Fact Sheet: Recycling Acid and Metal Salts from Pickling Liquors

    SciTech Connect

    Poole, L.; Recca, L.

    1999-01-14

    Regenerating hydrochloric acids from metal finishing pickling baths reduces costs, wastes, and produces a valuable by-product--ferrous sulfate. Order your copy of this OIT project fact sheet and learn more about how your company can benefit.

  4. High School Forum: "Invitations to Enquiry": The Calcite/Acid Reaction.

    ERIC Educational Resources Information Center

    Herron, J. Dudley, Ed.; Driscoll, D. R.

    1979-01-01

    Describes a high school chemistry experiment which involves the reaction between calcite and hydrochloric and sulfuric acids. This reaction can be carried out as a projected demonstration and on an individual basis. (HM)

  5. Higher LPA2 and LPA6 mRNA Levels in Hepatocellular Carcinoma Are Associated with Poorer Differentiation, Microvascular Invasion and Earlier Recurrence with Higher Serum Autotaxin Levels

    PubMed Central

    Ikeda, Hitoshi; Kurano, Makoto; Sato, Masaya; Kudo, Hiroki; Maki, Harufumi; Koike, Kazuhiko; Hasegawa, Kiyoshi; Kokudo, Norihiro; Yatomi, Yutaka

    2016-01-01

    Hepatocellular carcinoma (HCC) commonly develops in patients with liver fibrosis; in these patients, the blood levels of lysophosphatidic acid (LPA) and its generating enzyme autotaxin (ATX) increase with the liver fibrosis stage. We aimed to examine the potential relevance of ATX and LPA in HCC. Fifty-eight HCC patients who underwent surgical treatment were consecutively enrolled in the study. Among the LPA receptors in HCC, higher LPA2 mRNA levels correlated with poorer differentiation, and higher LPA6 mRNA levels correlated with microvascular invasion, which suggested a higher malignant potential of HCC with increased LPA2 and LPA6 expression. In patients with primary HCC, neither LPA2 nor LPA6 mRNA levels were associated with recurrence. However, when serum ATX levels were combined for analysis as a surrogate for plasma LPA levels, the cumulative intra-hepatic recurrence rate was higher in patients in whom both serum ATX levels and LPA2 or LPA6 mRNA levels were higher than the median. However, the mRNA level of phosphatidic acid-selective phospholipase A1ɑ, another LPA-generating enzyme, in HCC patients was not associated with pathological findings or recurrence, even in combination with the expression of LPA receptors. Higher LPA2 mRNA levels were associated with poorer differentiation, and higher LPA6 levels were associated with microvascular invasion in HCC; both became a risk factor for recurrence after surgical treatment when combined with increased serum ATX levels. ATX and LPA receptors merit consideration as therapeutic targets of HCC. PMID:27583415

  6. Acid Rain

    USGS Publications Warehouse

    Bricker, Owen P.; Rice, Karen C.

    1995-01-01

    Although acid rain is fading as a political issue in the United States and funds for research in this area have largely disappeared, the acidity of rain in the Eastern United States has not changed significantly over the last decade, and it continues to be a serious environmental problem. Acid deposition (commonly called acid rain) is a term applied to all forms of atmospheric deposition of acidic substances - rain, snow, fog, acidic dry particulates, aerosols, and acid-forming gases. Water in the atmosphere reacts with certain atmospheric gases to become acidic. For example, water reacts with carbon dioxide in the atmosphere to produce a solution with a pH of about 5.6. Gases that produce acids in the presence of water in the atmosphere include carbon dioxide (which converts to carbonic acid), oxides of sulfur and nitrogen (which convert to sulfuric and nitric acids}, and hydrogen chloride (which converts to hydrochloric acid). These acid-producing gases are released to the atmosphere through natural processes, such as volcanic emissions, lightning, forest fires, and decay of organic matter. Accordingly, precipitation is slightly acidic, with a pH of 5.0 to 5.7 even in undeveloped areas. In industrialized areas, most of the acid-producing gases are released to the atmosphere from burning fossil fuels. Major emitters of acid-producing gases include power plants, industrial operations, and motor vehicles. Acid-producing gases can be transported through the atmosphere for hundreds of miles before being converted to acids and deposited as acid rain. Because acids tend to build up in the atmosphere between storms, the most acidic rain falls at the beginning of a storm, and as the rain continues, the acids "wash out" of the atmosphere.

  7. Binary star speckle measurements during 1992-1997 from the SAO 6-m and 1-m telescopes in Zelenchuk

    NASA Astrophysics Data System (ADS)

    Balega, I. I.; Balega, Y. Y.; Maksimov, A. F.; Pluzhnik, E. A.; Shkhagosheva, Z. U.; Vasyuk, V. A.

    1999-12-01

    We present the results of speckle interferometric measurements of binary stars made with the television photon-counting camera at the 6-m Big Azimuthal Telescope (BTA) and 1-m telescope of the Special Astrophysical Observatory (SAO) between August 1992 and May 1997. The data contain 89 observations of 62 star systems on the large telescope and 21 on the smaller one. For the 6-m aperture 18 systems remained unresolved. The measured angular separation ranged from 39 mas, two times above the BTA diffraction limit, to 1593 mas.

  8. Insights into How Students Learn the Difference between a Weak Acid and a Strong Acid from Cartoon Tutorials Employing Visualizations

    ERIC Educational Resources Information Center

    Kelly, Resa M.; Akaygun, Sevil

    2016-01-01

    This article summarizes an investigation into how Flash-based cartoon video tutorials featuring molecular visualizations affect students' mental models of acetic acid and hydrochloric acid solutions and how the acids respond when tested for electrical conductance. Variation theory served as the theoretical framework for examining how students…

  9. Effect of Carburizing and Hardening Temperature on the Endurance of Forming Dies from Steel R6M5

    NASA Astrophysics Data System (ADS)

    Stepankin, I. N.; Ken'ko, V. M.; Boiko, A. A.

    2013-07-01

    Results of a study of the effect of carburizing of the forming surfaces of cold upset dies from high-speed steel R6M5 and of the hardening temperature on the structure and properties of the dies are presented. It is shown that the hardness and endurance of the carburized tools can be raised by hardening from lower temperatures.

  10. Deciphering the molecular mechanism responsible for GCaMP6m's Ca2+-dependent change in fluorescence.

    PubMed

    Barnett, Lauren M; Hughes, Thomas E; Drobizhev, Mikhail

    2017-01-01

    The goal of this work is to determine how GCaMP6m's fluorescence is altered in response to Ca2+-binding. Our detailed spectroscopic study reveals the simplest explanation for how GCaMP6m changes fluorescence in response to Ca2+ is with a four-state model, in which a Ca2+-dependent change of the chromophore protonation state, due to a shift in pKa, is the predominant factor. The pKa shift is quantitatively explained by a change in electrostatic potential around the chromophore due to the conformational changes that occur in the protein when calmodulin binds Ca2+ and interacts with the M13 peptide. The absolute pKa values for the Ca2+-free and Ca2+-saturated states of GCaMP6m are critical to its high signal-to-noise ratio. This mechanism has important implications for further improvements to GCaMP6m and potentially for other similarly designed biosensors.

  11. Profiling Amino Acids of Jordanian Scalp Hair as a Tool for Diabetes Mellitus Diagnosis: A Pilot Study.

    PubMed

    Rashaid, Ayat H B; Harrington, Peter de B; Jackson, Glen P

    2015-07-21

    Hair analysis is an area of increasing interest in the fields of medical and forensic sciences. Human scalp hair has attractive features in clinical studies because hair can be sampled easily and noninvasively from human subjects, and unlike blood and urine samples, it contains a chronological record of medication use. Keratin protein is the major component of scalp hair shaft material and it is composed of 21 amino acids. The method used herein for the amino acid determination in hair included keratin protein acid hydrolysis using 6 M hydrochloric acid (HCl), followed by amino acids derivatization using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA), and the determination of derivatized amino acids by gas chromatography/mass spectrometry (GC/MS). Amino acid profiles of scalp hair of 27 Jordanian subjects (15 diabetes mellitus (DM) type 2 patients and 12 control subjects) were analyzed. A fuzzy rule-building expert system (FuRES) classified the amino acid profiles into diabetic and control groups based on multivariate analyses of the abundance of 14 amino acids. The sensitivity and specificity were 100% for diabetes detection using leave-one-individual-out cross-validation. The areas under the receiver operative characteristics (ROC) curves were 1.0, which represents a highly sensitive and specific diabetes test. The nonessential amino acids Gly and Glu, and the essential amino acid Ile were more abundant in the scalp hair of diabetic patients compared to the hair of control subjects. The associations between the abundance of amino acids of human hair and health status may have clinical applications in providing diagnostic indicator or predicting other chronic or acute diseases.

  12. Acid diffusion through polyaniline membranes

    SciTech Connect

    Su, T.M.; Huang, S.C.; Conklin, J.A.

    1995-12-01

    Polyaniline membranes in the undoped (base) and doped (acid) forms are studied for their utility as pervaporation membranes. The separation of water from mixtures of propionic acid, acetic acid and formic acid have been demonstrated from various feed compositions. Doped polyaniline displays an enhanced selectivity of water over these organic acids as compared with undoped polyaniline. For as-cast polyaniline membranes a diffusion coefficient (D) on the order of 10{sup -9} cm{sup 2}/sec has been determined for the flux of protons through the membranes using hydrochloric acid.

  13. 40 CFR 420.90 - Applicability; description of the acid pickling subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... owned treatment works resulting from sulfuric acid, hydrochloric acid, or combination acid pickling... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the acid... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY...

  14. 40 CFR 420.90 - Applicability; description of the acid pickling subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... owned treatment works resulting from sulfuric acid, hydrochloric acid, or combination acid pickling... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the acid... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY...

  15. 40 CFR 420.90 - Applicability; description of the acid pickling subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... owned treatment works resulting from sulfuric acid, hydrochloric acid, or combination acid pickling... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the acid... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY...

  16. 40 CFR 420.90 - Applicability; description of the acid pickling subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... owned treatment works resulting from sulfuric acid, hydrochloric acid, or combination acid pickling... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the acid... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY...

  17. 40 CFR 420.90 - Applicability; description of the acid pickling subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... owned treatment works resulting from sulfuric acid, hydrochloric acid, or combination acid pickling... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the acid... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY...

  18. 46 CFR 153.1052 - Carriage of other cargoes in acid tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., hydrochloric acid, or phosphoric acid with out specific authorization from the Commandant (CG-ENG). ... 46 Shipping 5 2013-10-01 2013-10-01 false Carriage of other cargoes in acid tanks. 153.1052... Special Cargo Procedures § 153.1052 Carriage of other cargoes in acid tanks. No person shall load or...

  19. Recovery of uranium from acid media by macroporous bifunctional phosphinic acid resin

    SciTech Connect

    Sabharwal, K.N.; Srinivasan, T.G.; Rao, P.R.V.; Nandy, K.K.

    1996-11-01

    The extraction of uranium from various acid media such as nitric acid, sulphuric acid, hydrochloric acid, phosphoric acid and perchloric acid by a macroporous bifunctional phosphinic acid resin (MPBPA) has been studied. The distribution coefficients for the extraction of uranium by the MPBPA resin are compared with the corresponding values reported in literature for the conventional sulphonic acid resin. The results clearly indicate the suitability of the MPBPA resin to recover uranium from different types of acid solutions of widely ranging acidities. 17 refs., 6 figs., 5 tabs.

  20. Effect of Crystal Structure Fineness for Charge Alloy AK6M2 on Its Flux Treatment Efficiency

    NASA Astrophysics Data System (ADS)

    Nikitin, K. V.; Nikitin, V. I.; Timoshkin, I. Yu.; Chikova, O. A.

    2016-09-01

    The effect of charge billet structure and form of fluxes on structure, density, and gas content of alloy AK6M2 (Al - Si - Cu system) is studied. Alloys prepared from finely crystalline charge billet have smaller phase component sizes, lower gas content, and increased solid state density, and use of coarsely crystalline charge billets for alloy preparation necessitates an increase in flux preparation consumption in the stage of alloy preparation for casting.

  1. Deciphering the molecular mechanism responsible for GCaMP6m's Ca2+-dependent change in fluorescence

    PubMed Central

    Hughes, Thomas E.; Drobizhev, Mikhail

    2017-01-01

    The goal of this work is to determine how GCaMP6m’s fluorescence is altered in response to Ca2+-binding. Our detailed spectroscopic study reveals the simplest explanation for how GCaMP6m changes fluorescence in response to Ca2+ is with a four-state model, in which a Ca2+-dependent change of the chromophore protonation state, due to a shift in pKa, is the predominant factor. The pKa shift is quantitatively explained by a change in electrostatic potential around the chromophore due to the conformational changes that occur in the protein when calmodulin binds Ca2+ and interacts with the M13 peptide. The absolute pKa values for the Ca2+-free and Ca2+-saturated states of GCaMP6m are critical to its high signal-to-noise ratio. This mechanism has important implications for further improvements to GCaMP6m and potentially for other similarly designed biosensors. PMID:28182677

  2. Biological effects of 6 mT static magnetic fields: a comparative study in different cell types.

    PubMed

    Tenuzzo, Bernadette; Chionna, Alfonsina; Panzarini, Elisa; Lanubile, Remigio; Tarantino, Patrizia; Di Jeso, Bruno; Dwikat, Majdi; Dini, Luciana

    2006-10-01

    The present work was a comparative study of the bio-effects induced by exposure to 6 mT static magnetic field (MF) on several primary cultures and cell lines. Particular attention was dedicated to apoptosis. Cell viability, proliferation, intracellular Ca(2+) concentration and morphology were also examined. Primary cultures of human lymphocytes, mice thymocytes and cultures of 3DO, U937, HeLa, HepG2 and FRTL-5 cells were grown in the presence of 6 mT static MF and different apoptosis-inducing agents (cycloheximide, H(2)O(2), puromycin, heat shock, etoposide). Biological effects of static MF exposure were found in all the different cells examined. They were cell type-dependent but apoptotic inducer-independent. A common effect of the exposure to static MF was the promotion of apoptosis and mitosis, but not of necrosis or modifications of the cell shape. Increase of the intracellular levels of Ca(2+) ions were also observed. When pro-apoptotic drugs were combined with static MF, the majority of cell types rescued from apoptosis. To the contrary, apoptosis of 3DO cells was significantly increased under simultaneous exposure to static MF and incubation with pro-apoptotic drugs. From these data we conclude that 6 mT static MF exposure interfered with apoptosis in a cell type- and exposure time-dependent manner, while the effects of static MF exposure on the apoptotic program were independent of the drugs used.

  3. Biperiden hydrochlorate ameliorates dystonia of rats produced by microinjection of sigma ligands into the red nucleus.

    PubMed

    Yoshida, K; Takahashi, H; Sato, K; Higuchi, H; Shimizu, T

    2000-11-01

    It has been reported that the imbalance of anticholinergic and antidopaminergic activity of each neuroleptic drug correlates with the capacity to produce neuroleptic-induced acute dystonia (NAD) and the major focus of NAD is thought to be the striatum. Anticholinergic drugs are highly effective on NAD, but they are partially effective on neuroleptic-induced tardive dystonia and their effect on idiopathic dystonia is disappointing. Recently, it has been reported that the unilateral microinjection of sigma (sigma) ligands into the red nucleus induces torticollis of rats. This animal model appears to be a model of dystonia, but it is not clear whether it is suitable for NAD in man. To clarify this issue, we investigated the effect of an anticholinergic drug, biperiden hydrochlorate (BH), on this animal model. This study revealed that BH dose-dependently ameliorated dystonia of rats induced by two sigma ligands, whether each sigma ligand had dopaminergic affinity or not. This animal model of dystonia appears to be a model of NAD in man from the viewpoint of treatment-response. The results also suggest that not only dopaminergic and cholinergic systems but also sigma system, and not only the striatum but also the red nucleus, may play an important role in the pathophysiology of NAD.

  4. Dissolving Carboxylic Acids and Primary Amines on the Overhead Projector

    ERIC Educational Resources Information Center

    Solomon, Sally D.; Rutkowsky, Susan A.

    2010-01-01

    Liquid carboxylic acids (or primary amines) with limited solubility in water are dissolved by addition of aqueous sodium hydroxide (or hydrochloric acid) on the stage of an overhead projector using simple glassware and very small quantities of chemicals. This effective and colorful demonstration can be used to accompany discussions of the…

  5. Reactivity of clay minerals with acids and alkalies

    USGS Publications Warehouse

    Carroll, D.; Starkey, H.C.

    1971-01-01

    One-g samples of a montmorillonite, a metabentonite, an illite, two kaolinites, and three halloysites were treated with 50 ml of hydrochloric acid (6??45 N, 1:1), acetic acid (4??5 N, 1:3), sodium hydroxide (2??8 N), sodium chloride solution (pH 6??10; Na = 35???; Cl = 21??5???), and natural sea water (pH 7??85; Na = 35??5???; Cl = 21??5???) for a 10-day period in stoppered plastic vials. The supernatant solutions were removed from the clay minerals and analyzed for SiO2, Al2O3, CaO, MgO, Na2O, and K2O. All the solutions removed some SiO2, Al2O3, and Fe2O3 from the samples, but the quantities were small. Sodium hydroxide attacked the kaolin group minerals more strongly than it did montmorillonite, metabentonite, or illite. Halloysite was more strongly attacked by hydrochloric acid than was any of the other experimental minerals. Hydrochloric acid removed iron oxide coatings from soil clay minerals, but acetic acid did not remove them completely. The samples most strongly attacked by HCl and NaOH were examined by X-ray diffraction. Acid treatment did not destroy the structure of the clays, but the halloysite structure was partially destroyed. Sodium hydroxide attacked the halloysite structure, as shown by chemical analysis and X-ray diffraction. These experiments show that treatment in dilute acids has no harmful effect in the preparation of clays for X-ray diffraction. Acetic acid is preferred to hydrochloric acid for this purpose. Hydrochloric acid cleans clay minerals by removing free iron oxide from the surface; acetic acid is less effective. ?? 1971.

  6. High-performance wobbling subreflector for the Millimetre and Infrared Testa Grigia Observatory 2.6-m telescope

    NASA Astrophysics Data System (ADS)

    Mainella, Gianni; de Bernardis, Paolo; de Petris, Marco; Mandiello, Alfonso; Perciballi, Maurizio; Romeo, Gianni

    1996-05-01

    The Millimetre and Infrared Testa Grigia Observatory 2.6-m Cassegrain telescope has been designed to allow high-sensitivity observations in the millimeter spectral range. For this purpose, in order to reduce unwanted contributions from local foregrounds, we adopted a sky-chopping technique, by wobbling the telescope subreflector. We describe the design and performance of the wobbling system, which can endure external forced two and three fields square-wave modulation and includes features such as high frequency, high amplitude, high duty cycle, low microphonics, and high stability. millimeter-wave telescope.

  7. Syntheses, structures, and optical properties of Ba{sub 4}MInSe{sub 6} (M=Cu, Ag)

    SciTech Connect

    Yin Wenlong; Feng Kai; Hao Wenyu; Yao Jiyong; Wu Yicheng

    2012-08-15

    Two new quaternary chalcogenides, namely Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), were synthesized by solid state reactions. These two isostructural compounds adopt the Ba{sub 2}MnS{sub 3} structure type in the orthorhombic space group Pnma. In the structure, the M and In atoms randomly occupy one crystallographic unique metal position with the molar ratio of 1:1 The (M/In)Se{sub 4} tetrahedra are connected to each other by corner-sharing to form one-dimensional chains along the b direction, which are separated by mono-capped trigonal prismatically coordinated Ba atoms. Based on the diffuse reflectance spectrum, the optical band gaps were determined to be 2.23(2) and 2.41(2) eV for Ba{sub 4}CuInSe{sub 6} and Ba{sub 4}AgInSe{sub 6}, respectively. - Graphical abstract: In the structure of Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), the (M/In)Se{sub 4} tetrahedra are connected by corner-sharing to form chains along the b direction, which are separated by Ba atoms. Highlights: Black-Right-Pointing-Pointer Two new quaternary chalcogenides, Ba{sub 4}MInSe{sub 6} (M=Cu, Ag), were synthesized. Black-Right-Pointing-Pointer Ba{sub 4}MInSe{sub 6} (M=Cu, Ag) are isostructural and crystallize in the Ba{sub 2}MnS{sub 3} structure type Black-Right-Pointing-Pointer The (M/In)Se{sub 4} tetrahedra are connected by corner-sharing to form chains along the b direction. Black-Right-Pointing-Pointer The chains are separated by mono-capped trigonal prismatically coordinated Ba atoms. Black-Right-Pointing-Pointer The optical band gaps are 2.23(2) and 2.41(2) eV for Ba{sub 4}CuInSe{sub 6} and Ba{sub 4}AgInSe{sub 6}, respectively.

  8. Spectral investigation of a group of new cataclysmic variables from the first Byurakan survey with the 6-m telescope

    SciTech Connect

    Kopylov, I.M.; Lipovetskii, V.A.; Somov, N.N.; Somova, T.A.; Stepanyan, D.A.

    1988-09-01

    The paper gives the results of preliminary spectral investigations made with the 6-m telescope for seven stellar objects identified in the First Byurakan Survey (FBS) on the basis of the ultraviolet excess in their spectra. We have classified six of these seven stars as cataclysmic variables. The objects are divided into subclasses: three are dwarf novas, one is a recurrent nova, and two are novalike. One of the stars, FBS 1031 + 590, is, on the basis of all features of the spectrum and the nature of its variability, a polar. Finding charts and samples of spectral scans of the stars are given.

  9. Increased ceramide synthase 2 and 6 mRNA levels in breast cancer tissues and correlation with sphingosine kinase expression.

    PubMed

    Erez-Roman, Racheli; Pienik, Reut; Futerman, Anthony H

    2010-01-01

    Intervention in the ceramide metabolic pathway is emerging as a novel means to regulate cancer and to modify the activity of chemotherapeutic drugs. We now study mRNA expression levels of the six ceramide synthase (CerS) genes in breast cancer tissue. CerS2 and CerS6 mRNA was significantly elevated in breast cancer tissue compared to paired normal tissue, with approximately half of the individuals showing elevated CerS2 and CerS6 mRNA. A significant correlation was found between CerS2 and CerS6 expression, and between CerS4 and CerS2/CerS6 expression. Moreover, patients that expressed higher CerS2 or 4 mRNA levels tended to show no changes in sphingosine kinase 1 levels, and likewise patients that expressed no change in CerS2 or CerS4 mRNA levels tended to express higher levels of sphingosine kinase 1. Together these results suggest an important role for the CerS genes in breast cancer etiology or diagnosis.

  10. Customized overhead cranes for installation of India's largest 3.6m optical telescope at Devasthal, Nainital, India

    NASA Astrophysics Data System (ADS)

    Bangia, Tarun; Yadava, Shobhit; Kumar, Brijesh; Ghanti, A. S.; Hardikar, P. M.

    2016-07-01

    India's largest 3.6 m aperture optical telescope facility has been recently established at Devasthal site by Aryabhatta Research Institute of Observation Sciences (ARIES), an autonomous Institute under Department of Science and Technology, Government of India. The telescope is equipped with active optics and it is designed to be used for seeinglimited observations at visible and near-infrared wavelengths. A steel building with rotating cylindrical steel Dome was erected to house 3.6m telescope and its accessories at hilltop of Devasthal site. Customized cranes were essentially required inside the building as there were space constraints around the telescope building for operating big external heavy duty cranes from outside, transportation constraints in route for bringing heavy weight cranes, altitude of observatory, and sharp bends etc. to site. To meet the challenge of telescope installation from inside the telescope building by lifting components through its hatch, two Single Girder cranes and two Under Slung cranes of 10 MT capacity each were specifically designed and developed. All the four overhead cranes were custom built to achieve the goal of handling telescope mirror and its various components during installation and assembly. Overhead cranes were installed in limited available space inside the building and tested as per IS 3177. Cranes were equipped with many features like VVVFD compatibility, provision for tandem operation, digital load display, anti-collision mechanism, electrical interlocks, radio remote, low hook height and compact carriage etc. for telescope integration at site.

  11. OAJ 2.6m survey telescope: optical alignment and on-sky evaluation of IQ performances

    NASA Astrophysics Data System (ADS)

    Lousberg, Gregory P.; Bastin, Christian; Moreau, Vincent; Pirnay, Olivier; Flebus, Carlo; Chueca, Sergio; Iñiguez, César; Ederoclite, Alessandro; Ramió, Héctor V.; Cenarro, A. Javier

    2016-08-01

    AMOS has recently completed the alignment campaign of the 2.6m telescope for the Observatorio Astrofisico de Javalambre (OAJ). AMOS developed an innovative alignment technique for wide field-of-view telescopes that has been successfully implemented on the OAJ 2.6m telescope with the active support of the team of CEFCA (Centro de Estudios de Física del Cosmos de Aragón). The alignment relies on two fundamental techniques: (1) the wavefront-curvature sensing (WCS) for the evaluation of the telescope aberrations at arbitrary locations in the focal plane, and (2) the comafree point method for the adjustment of the position of the secondary mirror (M2) and of the focal plane (FP). The alignment campaign unfolds in three steps: (a) analysis of the repeatability of the WCS measurements, (b) assessment of the sensitivity of telescope wavefront error to M2 and FP position adjustments, and (c) optical alignment of the telescope. At the end of the campaign, seeing-limited performances are demonstrated in the complete focal plane. With the help of CEFCA team, the image quality of the telescope are investigated with a lucky-imaging method. Image sizes of less than 0.3 arcsec FWHM are obtained, and this excellent image quality is observed over the complete focal plane.

  12. First measurements with a new 6m long violin-bow marine heat probe off Costa Rica

    NASA Astrophysics Data System (ADS)

    Gennerich, H.-H.; Grevemeyer, I.; Heesemann, B.; Heesemann, M.; Kaul, N.; Müller, M.; Villinger, H.

    2003-04-01

    The design of a new 6m long violin-bow marine heat probe, first successful tests and data collected off Costa Rica during cruise M54-2 on RV METEOR in August 2002 are presented. The mechanically robust heat probe is designed for the operation in a pogo-style mode with a wide application range from 6000m deep sea trenches with mostly soft sediments to the upper continental slope where sediments are often sandy and difficult to penetrate. Due to the 6m length of its temperature sensor string undisturbed temperature gradients can be determined in shallow water with seasonal bottom water temperature variations. The heat probe is constructed in the classical "violin bow" design, with 22 thermistors equidistantly distributed inside an oil filled hydraulic tube attached to the strength member. The sensor tube also contains a heater wire for the generation of a calibrated heat pulse for in situ thermal conductivity measurements. The signal of the temperature sensors is measured with a resolution of 20-bits at a sample rate of 1 sec, resulting in a final temperature resolution of less than 1 mK at ambient sea floor temperatures. A carefully calibrated seawater sensor on top of the weight stand allows to measure the absolute bottom water temperature. Inclination and acceleration of the probe is measured also with a 1 sec sample rate to monitor the penetration process into the sediments and potential disturbances during the measurement period while the probe sits in the sediment. Data from a pressure sensor in conjunction with an acoustic altimeter allow the exact absolute measurement of the final penetration depth of the probe. The complete data set is stored in the probe but also transmitted via coax cable on board in real time which allows operational decisions during long term deployments of the probe. In addition the heat probe can be operated in a completely autonomous mode with internal storage and automated heat pulses. The battery capacity allows for 3 days

  13. First measurements with a new 6m long violin-bow marine heat probe off Costa Rica

    NASA Astrophysics Data System (ADS)

    Gennerich, H.; Grevemeyer, I.; Heesemann, B.; Heesemann, M.; Kaul, N.; M�ller, M.; Schneider, J.; Wallmann, K.; Villinger, H.

    2002-12-01

    The design of a new 6m long violin-bow marine heat probe and first successful tests and data collected off Costa Rica are presented. The data were collected during cruise M54-2 on RV METEOR in August 2002. The mechanically robust heat probe is designed for the operation in a pogo-style mode with a wide application range from 6000m deep sea trenches with mostly soft sediments to the upper continental slope where sediments are often sandy and difficult to penetrate. Due to the length of it?s temperature sensor string of 6m undisturbed temperature gradients can be determined in shallow water where seasonal bottom water temperature variations are superimposed on the undisturbed temperature field close to the seafloor. The heat probe is constructed in the classical 'violin bow' design, with 22 thermistors distributed over a total length of 6m in 0.23m intervals mounted inside an oil filled hydraulic tube which is attached to the strength member. The sensor tube also contains a heater wire for the generation of a calibrated heat pulse for in situ thermal conductivity measurements. The signal of the temperature sensors is measured with a resolution of 20-bits at a sample rate of 1 sec, resulting in a final temperature resolution of less than 1 mK at ambient seafloor temperatures. A carefully calibrated seawater sensor on top of the weight stand allows to measure the absolute bottom water temperature. Inclination and acceleration of the probe is measured also with a 1 sec sample rate to monitor the penetration process into the sediments and potential disturbances during the measurement period while the probe sits in the sediment. Data from a pressure sensor together with an acoustic altimeter provides the absolute final penetration depth of the probe. The complete data set is stored in the probe but also transmitted via coax cable on board in real time which allows operational decisions during long term deployments of the probe. In addition the heat probe can be operated

  14. Crystal Structure and Dielectric Properties of Microwave Ceramics CaLa(CaM)O6 [M = Nb, Sb

    NASA Astrophysics Data System (ADS)

    Dutta, Alo; Mandal, Sanjay; Kumari, Premlata; Mukhopadhyay, P. K.; Biswas, S. K.; Sinha, T. P.

    2017-01-01

    The dielectric properties of two perovskite oxides CaLa(CaM)O6 [M = Nb, Sb] synthesized by the solid-state reaction technique have been studied in the microwave and radio frequency range. The phase formation and the crystal structure of the materials are investigated by the Rietveld refinement of the x-ray diffraction data at room temperature. The Raman spectrum substantiates the crystal structure of the materials. The temperature dependence of the relaxation frequencies in the radio frequency range follows the Arrhenius law, and the corresponding activation energies are found to be 0.339 eV and 0.346 eV, respectively, for CaLa(CaNb)O6 and CaLa(CaSb)O6. The difference in the values of the dielectric constant and the loss tangent are correlated with the respective crystal structure of the materials.

  15. Witnessing magnetic twist with high-resolution observation from the 1.6-m New Solar Telescope

    PubMed Central

    Wang, Haimin; Cao, Wenda; Liu, Chang; Xu, Yan; Liu, Rui; Zeng, Zhicheng; Chae, Jongchul; Ji, Haisheng

    2015-01-01

    Magnetic flux ropes are highly twisted, current-carrying magnetic fields. They are crucial for the instability of plasma involved in solar eruptions, which may lead to adverse space weather effects. Here we present observations of a flaring using the highest resolution chromospheric images from the 1.6-m New Solar Telescope at Big Bear Solar Observatory, supplemented by a magnetic field extrapolation model. A set of loops initially appear to peel off from an overall inverse S-shaped flux bundle, and then develop into a multi-stranded twisted flux rope, producing a two-ribbon flare. We show evidence that the flux rope is embedded in sheared arcades and becomes unstable following the enhancement of its twists. The subsequent motion of the flux rope is confined due to the strong strapping effect of the overlying field. These results provide a first opportunity to witness the detailed structure and evolution of flux ropes in the low solar atmosphere. PMID:25919706

  16. Witnessing magnetic twist with high-resolution observation from the 1.6-m New Solar Telescope.

    PubMed

    Wang, Haimin; Cao, Wenda; Liu, Chang; Xu, Yan; Liu, Rui; Zeng, Zhicheng; Chae, Jongchul; Ji, Haisheng

    2015-04-28

    Magnetic flux ropes are highly twisted, current-carrying magnetic fields. They are crucial for the instability of plasma involved in solar eruptions, which may lead to adverse space weather effects. Here we present observations of a flaring using the highest resolution chromospheric images from the 1.6-m New Solar Telescope at Big Bear Solar Observatory, supplemented by a magnetic field extrapolation model. A set of loops initially appear to peel off from an overall inverse S-shaped flux bundle, and then develop into a multi-stranded twisted flux rope, producing a two-ribbon flare. We show evidence that the flux rope is embedded in sheared arcades and becomes unstable following the enhancement of its twists. The subsequent motion of the flux rope is confined due to the strong strapping effect of the overlying field. These results provide a first opportunity to witness the detailed structure and evolution of flux ropes in the low solar atmosphere.

  17. Design and Fabrication of a Supporting Structure for 3.6m Long Nb3Sn Racetrack Coils

    SciTech Connect

    Ambrosio, G.; Anerella, M.; Barzi, E.; Caspi, Shlomo; Cheng, Daniel; Dietderich, Daniel; Gourlay, Steve; Hafalia, A. Ray; Hannaford, Charles; Lietzke, Alan; Nobrega, A.R.; Sabbi, GianLuca; Schmalzle, J.; Wanderer, R. J; Zlobin, A.V.; Ferracin, P.

    2007-06-01

    As part of the LHC Accelerator Research Program (LARP), three US national laboratories (BNL, FNAL, and LBNL) are currently engaged in the development of superconducting magnets for the LHC Interaction Regions (IR) beyond the current design. As a first step towards the development of long Nb{sub 3}Sn quadrupole magnets, a 3.6 m long structure, based on the LBNL Subscale Common-Coil Magnet design, will be fabricated, assembled, and tested with aluminum-plate 'dummy coils'. The structure features an aluminum shell pre-tensioned over iron yokes using pressurized bladders and locking keys (bladder and key technology). Pre-load homogeneity and mechanical responses are monitored with pressure sensitive films and strain gauges mounted on the aluminum shell and the dummy coils. The details of the design and fabrication are presented and discussed, and the expected mechanical behavior is analyzed with finite element models.

  18. Ultra-Narrow Negative Flare Front Observed in Helium-10830 Å Using the1.6m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Cao, Wenda; Ding, Mingde; Kleint, Lucia; Su, Jiangtao; Liu, Chang; Ji, Haisheng; Chae, Jongchul; Jing, Ju; Cho, Kyuhyoun; Cho, Kyung-Suk; Gary, Dale E.; Wang, Haimin

    2016-05-01

    Solar flares are sudden flashes of brightness on the Sun and are often associated with coronal mass ejections and solar energetic particles that have adverse effects on the near-Earth environment. By definition, flares are usually referred to as bright features resulting from excess emission. Using the newly commissioned 1.6-m New Solar Telescope at Big Bear Solar Observatory, we show a striking “negative” flare with a narrow but unambiguous “dark” moving front observed in He I 10830 Å, which is as narrow as 340 km and is associated with distinct spectral characteristics in Hα and Mg II lines. Theoretically, such negative contrast in He I 10830 Å can be produced under special circumstances by nonthermal electron collisions or photoionization followed by recombination. Our discovery, made possible due to unprecedented spatial resolution, confirms the presence of the required plasma conditions and provides unique information in understanding the energy release and radiative transfer in solar flares.

  19. Ultra-narrow Negative Flare Front Observed in Helium-10830 Å Using the 1.6 m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Cao, Wenda; Ding, Mingde; Kleint, Lucia; Su, Jiangtao; Liu, Chang; Ji, Haisheng; Chae, Jongchul; Jing, Ju; Cho, Kyuhyoun; Cho, Kyungsuk; Gary, Dale; Wang, Haimin

    2016-03-01

    Solar flares are sudden flashes of brightness on the Sun and are often associated with coronal mass ejections and solar energetic particles that have adverse effects on the near-Earth environment. By definition, flares are usually referred to as bright features resulting from excess emission. Using the newly commissioned 1.6 m New Solar Telescope at Big Bear Solar Observatory, we show a striking “negative” flare with a narrow but unambiguous “dark” moving front observed in He i 10830 Å, which is as narrow as 340 km and is associated with distinct spectral characteristics in Hα and Mg ii lines. Theoretically, such negative contrast in He i 10830 Å can be produced under special circumstances by nonthermal electron collisions or photoionization followed by recombination. Our discovery, made possible due to unprecedented spatial resolution, confirms the presence of the required plasma conditions and provides unique information in understanding the energy release and radiative transfer in astronomical objects.

  20. Crystal Structure and Dielectric Properties of Microwave Ceramics CaLa(CaM)O6 [M = Nb, Sb

    NASA Astrophysics Data System (ADS)

    Dutta, Alo; Mandal, Sanjay; Kumari, Premlata; Mukhopadhyay, P. K.; Biswas, S. K.; Sinha, T. P.

    2017-03-01

    The dielectric properties of two perovskite oxides CaLa(CaM)O6 [M = Nb, Sb] synthesized by the solid-state reaction technique have been studied in the microwave and radio frequency range. The phase formation and the crystal structure of the materials are investigated by the Rietveld refinement of the x-ray diffraction data at room temperature. The Raman spectrum substantiates the crystal structure of the materials. The temperature dependence of the relaxation frequencies in the radio frequency range follows the Arrhenius law, and the corresponding activation energies are found to be 0.339 eV and 0.346 eV, respectively, for CaLa(CaNb)O6 and CaLa(CaSb)O6. The difference in the values of the dielectric constant and the loss tangent are correlated with the respective crystal structure of the materials.

  1. Perovskite LaPbMSbO{sub 6} (M=Co, Ni): Structural distortion, magnetic and dielectric properties

    SciTech Connect

    Bai, Yijia; Han, Lin; Liu, Xiaojuan; Deng, Xiaolong; Wu, Xiaojie; Yao, Chuangang; Liang, Qingshuang; Meng, Junling; Meng, Jian

    2014-09-15

    The B-site ordered double perovskite oxides LaPbMSbO{sub 6} (M=Co, Ni) have been synthesized via the modified Sol–Gel precursor two-step route. Rietveld refinements reveal strong abnormal structural distortion and BO{sub 6} octahedral deformation appearing along the ab plane. Owing to the cooperative Jahn–Teller effect of Co{sup 2+} and Pb{sup 2+} ions, the Co-related compound exhibits almost complete Co{sup 2+}–Sb{sup 5+} order. For magnetic properties, spin-canted antiferromagnetic state with high extent of magnetic frustration is confirmed. The Ni-related compound presents heavier magnetic frustration for introducing tiny disorder on site occupation accompanied with valence state and further enhancing the complexity of magnetic competition. Dielectric measurements present a considerable temperature dependent dielectric relaxation with great dc-like loss feature in the LaPbCoSbO{sub 6}. For LaPbNiSbO{sub 6}, however, the permittivity with low dielectric loss is shown to be insensitive to either temperature or frequency. The corresponding electronic active energy manifests that the weakly bounded 3d-electron is prone to hop in a more distorted Co–Sb sublattice. - Graphical abstract: XRD Rietveld refinement result of LaPbCoSbO{sub 6} presented a large BO{sub 6} octahedral distortion along the ab plane. Based upon the variations from Co–O–Sb bond angles, a fierce competition from many extended magnetic coupling routes (M–O–O–M) would induce a considerably large magnetic frustration and electron hopping restriction. - Highlights: • Highly ordered LaPbMSbO{sub 6} (M=Co, Ni) were synthesized. • Abnormal structural distortion appeared in the ab plane. • Strong magnetic frustration was confirmed via M{sup 2+}–O–O–M{sup 2+} route. • Dielectric measurements presented a large difference between Co and Ni samples. • 3d-electronic structure determines lattice distortion and physical properties.

  2. Infiltration of natural caries lesions in relation to their activity status and acid pretreatment in vitro.

    PubMed

    Neuhaus, K W; Schlafer, S; Lussi, A; Nyvad, B

    2013-01-01

    This study aimed at testing how active and inactive enamel caries lesions differ by their degree of resin infiltration, and whether the choice of acid pretreatment plays a crucial role. Four examiners assessed 104 human molars and premolars with noncavitated enamel lesions and classified them as 'active' or 'inactive' using the Nyvad criteria. Forty-five teeth were included in this study after independent unanimous lesion activity assessment. Lesions were cut perpendicularly into 2 halves. Each half lesion was pretreated with either 15% hydrochloric acid or 35% phosphoric acid. The lesions were infiltrated after staining with rhodamine isothiocyanate. Thin sections of 100 µm were prepared and the specimens were bleached with 30% hydrogen peroxide. The specimens were then counterstained with sodium fluorescein, subjected to confocal laser scanning microscopy and analyzed quantitatively. Outcome parameters were maximum and average infiltration depths as well as relative penetration depths and areas. In active lesions no significant difference of percentage maximum penetration depth and percentage average penetration depth between lesions pretreated with hydrochloric or phosphoric acid could be observed. In inactive lesions, however, phosphoric acid pretreatment resulted in significantly lower penetration compared to hydrochloric acid pretreatment. Surface conditioning with hydrochloric acid led to similar infiltration results in active and inactive lesions. Moreover, inactive lesions showed greater variability in all assessed infiltration parameters than did active lesions. In conclusion, caries lesion activity and acid pretreatment both influenced the infiltration. The use of phosphoric acid to increase permeability of the surface layer of active lesions should be further explored.

  3. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6 m New Solar Telescope.

    PubMed

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale; Wang, Haimin

    2016-04-13

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6 m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere's response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80-200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics.

  4. A 128-channel 6 mW wireless neural recording IC with spike feature extraction and UWB transmitter.

    PubMed

    Chae, Moo Sung; Yang, Zhi; Yuce, Mehmet R; Hoang, Linh; Liu, Wentai

    2009-08-01

    This paper reports a 128-channel neural recording integrated circuit (IC) with on-the-fly spike feature extraction and wireless telemetry. The chip consists of eight 16-channel front-end recording blocks, spike detection and feature extraction digital signal processor (DSP), ultra wideband (UWB) transmitter, and on-chip bias generators. Each recording channel has amplifiers with programmable gain and bandwidth to accommodate different types of biological signals. An analog-to-digital converter (ADC) shared by 16 amplifiers through time-multiplexing results in a balanced trade-off between the power consumption and chip area. A nonlinear energy operator (NEO) based spike detector is implemented for identifying spikes, which are further processed by a digital frequency-shaping filter. The computationally efficient spike detection and feature extraction algorithms attribute to an auspicious DSP implementation on-chip. UWB telemetry is designed to wirelessly transfer raw data from 128 recording channels at a data rate of 90 Mbit/s. The chip is realized in 0.35 mum complementary metal-oxide-semiconductor (CMOS) process with an area of 8.8 x 7.2 mm(2) and consumes 6 mW by employing a sequential turn-on architecture that selectively powers off idle analog circuit blocks. The chip has been tested for electrical specifications and verified in an ex vivo biological environment.

  5. Ultra high tip speed (670.6 m/sec) fan stage with composite rotor: Aerodynamic and mechanical design

    NASA Technical Reports Server (NTRS)

    Halle, J. E.; Burger, G. D.; Dundas, R. E.

    1977-01-01

    A highly loaded, single-stage compressor having a tip speed of 670.6 m/sec was designed for the purpose of investigating very high tip speeds and high aerodynamic loadings to obtain high stage pressure ratios at acceptable levels of efficiency. The design pressure ratio is 2.8 at an adiabatic efficiency of 84.4%. Corrected design flow is 83.4 kg/sec; corrected design speed is 15,200 rpm; and rotor inlet tip diameter is 0.853 m. The rotor uses multiple-circular-arc airfoils from 0 to 15% span, precompression airfoils assuming single, strong oblique shocks from 21 to 43% span, and precompression airfoils assuming multiple oblique shocks from 52% span to the tip. Because of the high tip speeds, the rotor blades are designed to be fabricated of composite materials. Two composite materials were investigated: Courtaulds HTS graphite fiber in a Kerimid 601 polyimide matrix and the same fibers in a PMR polyimide matrix. In addition to providing a description of the aerodynamic and mechanical design of the 670.0 m/sec fan, discussion is presented of the results of structural tests of blades fabricated with both types of matrices.

  6. Unprecedented Fine Structure of a Solar Flare Revealed by the 1.6~m New Solar Telescope

    NASA Astrophysics Data System (ADS)

    Jing, Ju; Xu, Yan; Cao, Wenda; Liu, Chang; Gary, Dale E.; Wang, Haimin

    2016-05-01

    Solar flares signify the sudden release of magnetic energy and are sources of so called space weather. The fine structures (below 500 km) of flares are rarely observed and are accessible to only a few instruments world-wide. Here we present observation of a solar flare using exceptionally high resolution images from the 1.6~m New Solar Telescope (NST) equipped with high order adaptive optics at Big Bear Solar Observatory (BBSO). The observation reveals the process of the flare in unprecedented detail, including the flare ribbon propagating across the sunspots, coronal rain (made of condensing plasma) streaming down along the post-flare loops, and the chromosphere's response to the impact of coronal rain, showing fine-scale brightenings at the footpoints of the falling plasma. Taking advantage of the resolving power of the NST, we measure the cross-sectional widths of flare ribbons, post-flare loops and footpoint brighenings, which generally lie in the range of 80-200 km, well below the resolution of most current instruments used for flare studies. Confining the scale of such fine structure provides an essential piece of information in modeling the energy transport mechanism of flares, which is an important issue in solar and plasma physics.

  7. Assembly and Test of a Support Structure for 3.6 m Long Nb3Sn Racetrack Coils

    SciTech Connect

    Ambrosio, G.; Anerella, M.; Caspi, S.; Cheng, D.W.; Felice, H.; Hafalia, A.R.; Hannaford, C.R.; Lietzke, A.F.; Lizarazo, J.; Muratore, J.; Sabbi, G.L.; Schmalzle, J.; Thomas, R.; Wanderer, P.J.; Ferracin, P.

    2008-06-01

    The LHC Accelerator Research Program (LARP) is currently developing 4 m long Nb{sub 3}Sn quadrupole magnets for a possible upgrade of the LHC Interaction Regions (IR). In order to provide a reliable test bed for the fabrication and test of long Nb{sub 3}Sn coils, LARP has started the development of the long racetrack magnet LRS01. The magnet is composed of two 3.6 m long racetrack coils contained in a support structure based on an aluminum shell pre-tensioned with water-pressurized bladders and interference keys. For the phase-one test of the assembly procedure and loading operation, the structure was pre-stressed at room temperature and cooled down to 77 K with instrumented, solid aluminum 'dummy coils'. Mechanical behavior and stress homogeneity were monitored with strain gauges mounted on the shell and the dummy coils. The dummy coils were replaced with reacted and impregnated Nb{sub 3}Sn coils in a second assembly procedure, followed by cool-down to 4.5 K and powered magnet test. This paper report on the assembly and loading procedures of the support structure as well as the comparison between strain gauge data and 3D model predictions.

  8. M2Ba2Sn6 (m =yb, ca): metallic zintl phases with a novel tin chain substructure.

    PubMed

    Ge, Ming-Hui; Corbett, John D

    2007-05-14

    The compounds M2Ba2Sn6 (M = Yb, Ca) have been synthesized by solid-state reactions in welded Ta tubes at high temperature. Their structures were determined by single-crystal X-ray diffraction studies to be orthorhombic; space group Cmca (No. 64); Z = 8; a = 15.871(3), 15.912 (3) A; b = 9.387(2), 9.497(2) A; c = 17.212(3), 17.184(3) A; and V = 2564.3(9), 2597.0(9) A3, respectively. These contain infinite tin chains along constructed from butterflylike 3-bonded Sn tetramers interconnected by pairs of 2-bonded Sn. The chains are further interconnected into corrugated layers by somewhat longer Sn-Sn bonds along c. The compounds with the chains alone would be Zintl phases, but the interchain bonding makes them formally one-electron rich per formula unit. The electronic structures calculated by extended Hückel and TB-LMTO-ASA methods indicate that these compounds are metallic but with a deep pseudogap at the Fermi level. States that bind the extra electrons lie just below EF and involve important Yb(Ca)-Sn contributions. The origin of metallic Zintl phases is briefly discussed.

  9. Catalytic destruction of perchlorate in ferric chloride and hydrochloric acid solution with control of temperature, pressure and chemical reagents

    DOEpatents

    Gu, Baohua; Cole, David R.; Brown, Gilbert M.

    2004-10-05

    A method is described to decompose perchlorate in a FeCl.sub.3 /HCl aqueous solution such as would be used to regenerate an anion exchange resin used to remove perchlorate. The solution is mixed with a reducing agent, preferably an organic alcohol and/or ferrous chloride, and can be heated to accelerate the decomposition of perchlorate. Lower temperatures may be employed if a catalyst is added.

  10. Corrosion Inhibition by Tithonia diversifolia (Hemsl) A. Gray leaves extract for 304 SS in hydrochloric acid solution

    NASA Astrophysics Data System (ADS)

    Firdausi, S.; Kurniawan, F.

    2016-04-01

    The inhibition effect of Tithonia diversifolia (Hemsl) A. Gray leaves extract on the corrosion phenomena of 304 SS in 1 M HCl has been studied by polarization potentiodynamic. The powder of T. diversifolia was extracted by demineralized water which was cultivated in East Java, Indonesia. The extract was characterized by FTIR spectrophotometer. The presence of T. diversifolia can inhibit the corrosion rate of 304 SS. The efficiency inhibition value of 2 g/L T. diversifolia leaves extract reached up to 77.27% at room temperature.

  11. [Changes in the ultrastructure of the stomach mucous membrane parietal cells caused by inhibitors of hydrochloric acid secretion].

    PubMed

    Dondukova, G V; Morozov, I A

    2002-01-01

    The study of the action of phamotidine and omeprazol on the stomach parietal cells in patients with duodenal ulcer has shown that phamotidin results in changes of secretory membrane of the parietal cells increasing its secretory potential while omeprazol reduces energetic metabolism of the lining cell by the impact on its mitochondrial apparatus. Both in children and adults with duodenal ulcer more developed mitochondrial cell activity was found after omeprazol treatment.

  12. Quinoxaline derivatives as corrosion inhibitors for mild steel in hydrochloric acid medium: Electrochemical and quantum chemical studies

    NASA Astrophysics Data System (ADS)

    Olasunkanmi, Lukman O.; Kabanda, Mwadham M.; Ebenso, Eno E.

    2016-02-01

    The corrosion inhibition potential of four quinoxaline derivatives namely, 1-[3-(4-methylphenyl)-5-(quinoxalin-6-yl)-4,5-dihydropyrazol-1-yl]butan-1-one (Me-4-PQPB), 1-(3-(4-methoxyphenyl)-5-(quinoxalin-6-yl)-4,5-dihydropyrazol-1-yl)butan-1-one (Mt-4-PQPB), 1-[3-(3-methoxyphenyl)-5-(quinoxalin-6-yl)-4,5-dihydropyrazol-1-yl]butan-1-one (Mt-3-PQPB) and 1-[3-(2H-1,3-benzodioxol-5-yl)-5-(quinoxalin-6-yl)-4,5-dihydropyrazol-1-yl]butan-1-one (Oxo-1,3-PQPB) was studied for mild steel corrosion in 1 M HCl solution using electrochemical, spectroscopic techniques and quantum chemical calculations. The results of both potentiodynamic polarization and electrochemical impedance spectroscopic studies revealed that the compounds are mixed-type inhibitors and the order of corrosion inhibition efficiency at 100 ppm is Me-4-PQPB>Mt-3-PQPB>Oxo-1,3-PQPB>Mt-4-PQPB. Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopic analyses confirmed the presence of chemical interactions between the inhibitors and mild steel surface. The adsorption of the inhibitor molecules on mild steel surface was found to be both physisorption and chemisorption but predominantly chemisorption. The experimental data obey Langmuir adsorption isotherm. Scanning electron microscopy studies revealed the formation of protective films of the inhibitors on mild steel surface. Quantum chemical parameters obtained from density functional theory (DFT) calculations support experimental results.

  13. 40 CFR 63.1218 - What are the standards for hydrochloric acid production furnaces that burn hazardous waste?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... limits provided by paragraph (a)(5) of this section; (2) For mercury, hydrogen chloride and chlorine gas..., except for an area source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess..., except for an area source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in...

  14. 40 CFR 63.1218 - What are the standards for hydrochloric acid production furnaces that burn hazardous waste?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...)(5) of this section; (2) For mercury, hydrogen chloride and chlorine gas emissions in excess of the... as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the levels... source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the...

  15. 40 CFR 63.1218 - What are the standards for hydrochloric acid production furnaces that burn hazardous waste?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... paragraph (a)(5) of this section; (2) For mercury, hydrogen chloride and chlorine gas emissions in excess of... source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the levels... source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the...

  16. 40 CFR 63.1218 - What are the standards for hydrochloric acid production furnaces that burn hazardous waste?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... limits provided by paragraph (a)(5) of this section; (2) For mercury, hydrogen chloride and chlorine gas..., except for an area source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess..., except for an area source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in...

  17. 40 CFR 63.1218 - What are the standards for hydrochloric acid production furnaces that burn hazardous waste?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...)(5) of this section; (2) For mercury, hydrogen chloride and chlorine gas emissions in excess of the... as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the levels... source as defined under § 63.2, hydrogen chloride and chlorine gas emissions in excess of the...

  18. Impact of quality parameters on the recovery of putrescine and cadaverine in fish using methanol-hydrochloric acid solvent extraction.

    PubMed

    Richard, Nicole L; Pivarnik, Lori F; Ellis, P Christopher; Lee, Chong M

    2011-01-01

    Methanol (MeOH) extraction by AOAC Official Method 996.07 has resulted in low amine recoveries in fresh fish tissue. Addition of 25% 0.4 M HCl to the 75% methanol-water extraction solvent resulted in higher recoveries of putrescine and cadaverine. Average putrescine recovery increased from 55 to 92% in flounder, scup, bluefish, and salmon; from 92 to 98% in mackerel; and from 83 to 107% in processed mackerel. Average cadaverine recovery increased from 57 to 95% in flounder, scup, bluefish, and salmon; from 91 to 97% in mackerel; and from 92 to 108% in processed mackerel. Fish stored on ice for 12 days also showed differences between background concentrations determined with the two solvents. However, the values decreased with storage time, indicating that degradation of the protein matrix may cause more comparable measurements between the two solvents. However, consistently higher putrescine and cadaverine measurements were determined using MeOH-HCl. Although significant differences in the extraction of amines from the high-fat fish tissue were not seen between MeOH and MeOH-HCl, it would be ideal to have one solvent for biogenic amine extraction. This study confirms that MeOH-HCl is a better solvent for complete extraction and recovery of putrescine and cadaverine in fresh and processed fish tissues.

  19. 4-Dimenthylaminopyridine or Acid-Catalyzed Synthesis of Esters: A Comparison

    ERIC Educational Resources Information Center

    van den Berg, Annemieke W. C.; Hanefeld, Ulf

    2006-01-01

    A set of highly atom-economic experiments was developed to highlight the differences between acid- and base-catalyzed ester syntheses and to introduce the principles of atom economy. The hydrochloric acid-catalyzed formation of an ester was compared with the 4-dimethylaminopyradine-catalyzed ester synthesis.

  20. Tested Demonstrations: Buffer Capacity of Various Acetic Acid-Sodium Acetate Systems: A Lecture Experiment.

    ERIC Educational Resources Information Center

    Donahue, Craig J.; Panek, Mary G.

    1985-01-01

    Background information and procedures are provided for a lecture experiment which uses indicators to illustrate the concept of differing buffer capacities by titrating acetic acid/sodium acetate buffers with 1.0 molar hydrochloric acid and 1.0 molar sodium hydroxide. A table with data used to plot the titration curve is included. (JN)

  1. DOTIFS: a new multi-IFU optical spectrograph for the 3.6-m Devasthal optical telescope

    NASA Astrophysics Data System (ADS)

    Chung, Haeun; Ramaprakash, A. N.; Omar, Amitesh; Ravindranath, Swara; Chattopadhyay, Sabyasachi; Rajarshi, Chaitanya V.; Khodade, Pravin

    2014-07-01

    Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4" x 8.7" field of view with 144 spaxel elements, each sampling 0.8" hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8' diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.

  2. KMTNET: A Network of 1.6 m Wide-Field Optical Telescopes Installed at Three Southern Observatories

    NASA Astrophysics Data System (ADS)

    Kim, Seung-Lee; Lee, Chung-Uk; Park, Byeong-Gon; Kim, Dong-Jin; Cha, Sang-Mok; Lee, Yongseok; Han, Cheongho; Chun, Moo-Young; Yuk, Insoo

    2016-02-01

    The Korea Microlensing Telescope Network (KMTNet) is a wide-field photometric system installed by the Korea Astronomy and Space Science Institute (KASI). Here, we present the overall technical specifications of the KMTNet observation system, test observation results, data transfer and image processing procedure, and finally, the KMTNet science programs. The system consists of three 1.6 m wide-field optical telescopes equipped with mosaic CCD cameras of 18k by 18k pixels. Each telescope provides a 2.0 by 2.0 square degree field of view. We have finished installing all three telescopes and cameras sequentially at the Cerro-Tololo Inter-American Observatory (CTIO) in Chile, the South African Astronomical Observatory (SAAO) in South Africa, and the Siding Spring Observatory (SSO) in Australia. This network of telescopes, which is spread over three different continents at a similar latitude of about -30 degrees, enables 24-hour continuous monitoring of targets observable in the Southern Hemisphere. The test observations showed good image quality that meets the seeing requirement of less than 1.0 arcsec in I-band. All of the observation data are transferred to the KMTNet data center at KASI via the international network communication and are processed with the KMTNet data pipeline. The primary scientific goal of the KMTNet is to discover numerous extrasolar planets toward the Galactic bulge by using the gravitational microlensing technique, especially earth-mass planets in the habitable zone. During the non-bulge season, the system is used for wide-field photometric survey science on supernovae, asteroids, and external galaxies.

  3. KMTNet: a network of 1.6-m wide field optical telescopes installed at three southern observatories

    NASA Astrophysics Data System (ADS)

    Lee, Chung-Uk; Kim, Seung-Lee; Cha, Sang-Mok; Lee, Yongseok; Kim, Dong-Jin; Park, Byeong-Gon; Lee, Dong-Joo; Koo, Jae-Rim; Hong, Kyeongsoo; Lee, Jae Woo; Ryu, Yoon-Hyun; Lim, Beomdu; Lim, Jin-Sun; Gho, Seung-Won; Kim, Min-Jun

    2015-08-01

    Korea Astronomy and Space Science Institute (KASI) have installed three identical 1.6-m telescopes, called Korea Microlensing Telescope Network (KMTNet), which cover 2 x 2 degree field of view with the plate scale of 0.4 arcsec/pixel at three observatories - CTIO, SSO and SAAO in southern hemisphere. The uniqueness of the system is the uninterupted 24-hour monitoring with a wide field optics in southern hemisphere. The telescope adopts prime focus using a parabolic mirror and four spherical flattening lenses. The structural design and driving systems are modified from the degin of 2MASS telescope. The one piece filter-shutter assembly has a sliding shutter and four 310-mm square filters. Each observation system produces a 680MB size image file at site and the images are transfered to KASI data center using the Global Ring Network for Advanced Application Development (GLORIAD) network with the band width of 50Mbps in average. The main science goal of the KMTNet is to discover Earth like extra solar planet using the microlensing technique during bulge season, and 50% of the total observation time is allocated for the science program solely. The other telescope times are allocated for pre-selected seven science programs during non-bulge season. From the test observation, we verify that the most important two requirements are satisfied: 10 arcsec in RMS for the pointing accuracy and 1 arcsec of delivered image quality in I-band. In this presentation, we introduce finally installed system at each observatory and its observational performance obtained from the test observation.

  4. Influence of acid precursors on physicochemical properties of nanosized titania synthesized by thermal-hydrolysis method

    SciTech Connect

    Rajesh, B.; Sasirekha, N.R.; Chen, Y.-W.

    2008-03-04

    The influence of nature and concentration of acid species on surface morphology and physicochemical properties of titania particles synthesized by direct thermal hydrolysis of titanium tetrachloride was investigated. The acids used were hydrochloric acid, nitric acid, sulfuric acid, and perchloric acid with a concentration of 3 M. Thermal hydrolysis of titanium tetrachloride in hydrochloric acid and perchloric acid with molar ratios of [H{sup +}]/[Ti{sup 4+}] = 0.5, 1.0, 1.5, and 2.0, respectively, was used to study the effect of acid concentration. The synthesized materials were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis. Characterization of the samples by X-ray diffraction studies revealed the influence of acid species on the phase transformation of titania. Samples prepared by hydrochloric acid, nitric acid, and perchloric acid formed rutile phase with rhombus primary particles, while sulfuric acid resulted in anatase phase with flake-shaped primary particles. Transmission electron microscopy and dynamic light scattering results confirmed the nanosized titania particles and the agglomeration of primary particles to form secondary particles in spherical shape. The particle size of titania prepared using perchloric acid was smaller than those prepared with other acid sources. A direct correlation between [H{sup +}]/[Ti{sup 4+}] ratio and particle size of titania was observed.

  5. Inspection, testing, and operating requiremens for the packaging and shipping of uranium trioxide in 55-gallon Department of Transportation (DOT) Specification 6M shipping packagings

    SciTech Connect

    Toomer, D.V.

    1991-06-01

    This document identifies the inspection, testing and operating requirements for the packaging, loading, and shipping of uranium trioxide (UO{sub 3}) in 55-gallon DOT Specification 6M shipping packagings from the Idaho Chemical Processing Plant (ICPP). Compliance with this document assures established controls for the purchasing, packaging, loading, and shipping of DOT Specification 6M shipping packagings are maintained in strict accordance with applicable Code of Federal Regulations (CFRs) and Department of Energy (DOE) Orders. 7 refs., 3 figs., 1 tab.

  6. Incorporation of stratospheric acids into water ice

    NASA Technical Reports Server (NTRS)

    Elliott, Scott; Turco, Richard P.; Toon, Owen B.; Hamill, Patrick

    1990-01-01

    Hydrochloric and hydrofluoric acids are absorbed within the water ice lattice at mole fractions maximizing below 0.00001 and 0.0001 in a variety of solid impurity studies. The absorption mechanism may be substitutional or interstitial, leading in either case to a weak permeation of stratospheric ices by the acids at equilibrium. Impurities could also inhabit grain boundaries, and the acid content of atmospheric ice crystals will then depend on details of their surface and internal microstructures. Limited evidence indicates similar properties for the absorption of HNO3. Water ice lattices saturated with acid cannot be a significant local reservoir for HCl in the polar stratosphere.

  7. Effect of Chitosan Dissolved in Different Acids on its Ability to Control Postharvest Gray Mold of Table Grape

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Chitosan is a natural biopolymer that must be dissolved in an acid solution to activate its antimicrobial and eliciting properties. Among 15 acids, chitosan dissolved in 1% solutions of acetic, L-ascorbic, formic, L-glutamic, hydrochloric, lactic, maleic, malic, phosphorous, and succinic. Chitosan s...

  8. Formation of Linear Polyenes in Thermal Dehydration of Polyvinyl Alcohol, Catalyzed by Phosphotungstic Acid

    NASA Astrophysics Data System (ADS)

    Tretinnikov, O. N.; Sushko, N. I.

    2015-01-01

    In order to obtain linear polyenes in polyvinyl alcohol films via acid-catalyzed thermal dehydration of the polyvinyl alcohol, we used phosphotungstic acid as the catalyst: a safe and heat-stable solid chemical compound. We established that phosphotungstic acid, introduced as solid nanoparticles into polyvinyl alcohol films, is a more effective dehydration catalyst than hydrochloric acid, since in contrast to HCl it does not evaporate from the film during heat treatment.

  9. Research of dynamic properties of alloys of AMg6BM and AMg6M in shock-wave experiment on a gas gun

    NASA Astrophysics Data System (ADS)

    Mokrushin, S. S.; Karnaukhov, E. I.; Malugina, S. N.; Kazakov, D. N.; Kozelkov, O. E.; Pavlenko, A. V.

    2015-09-01

    Spall strength and elastoplastic parameters of aluminum alloys AMg6BM and AMg6M were studied in shock wave experiments with light gas guns LGG-1200 and LGG-2500 and results of these experiments are provided. Strength wave profiles were registered simultaneously by VISAR and interferometer PDV. Consideration was given to dependences of spall strength and strength parameters of aluminum alloys AMg6BM and AMg6M on the amplitude of the shock-wave loading in the range of 1.1 to 14.2 GPa and on deformation rate in the range of 0.2 to 3.6 · 105 s-1. Threshold damage levels for alloys AMg6M and AMg6BM are determined. It was shown that alloy AMg6BM softens under the pressure more than 5 GPa.

  10. Safety analysis report for packaging: the ORNL DOT specification 6M - tritium trap package. [Tritium absorbed as solid uranium tritide in depleted uranium trap

    SciTech Connect

    DeVore, J.R.

    1984-04-01

    The ORNL DOT Specification 6M--Tritium Trap Package was fabricated at the Oak Ridge National Laboratory (ORNL) for the transport of Type B quantities of tritium as solid uranium tritide. The package was evaluated on the basis of tests performed by the Dow Chemical Company, Rocky Flats Division, on the DOT-6M container, a drop test performed by the ORNL Operations Division, and International Atomic Energy Agency (IAEA) approvals on a similar tritium transport container. The results of these evaluations demonstrate that the package is in compliance with the applicable regulations for the transport of Type B quantities of tritium. 4 references, 8 figures.

  11. Hydrogen isotherms for LaNi(sub 4.6)M(sub .04)alloys where M=Group 4A elements

    NASA Technical Reports Server (NTRS)

    Luo, S.; Flanagan, T. B.; Bowman, R. C., Jr.

    2000-01-01

    Hydrogen isotherms have been measured for activated LaNi(sub 4.6)M(sub 0.4) alloys from 300 K to 473 K or 493 K, where M= Si, Ge, Sn. Thermodynamic parameters have been obtained from the isotherms using van't Hoff plots for hydride decomposition.

  12. Sugar yields from dilute oxalic acid pretreatment of maple wood compared to those with other dilute acids and hot water.

    PubMed

    Zhang, Taiying; Kumar, Rajeev; Wyman, Charles E

    2013-01-30

    Dilute oxalic acid pretreatment was applied to maple wood to improve compatibility with downstream operations, and its performance in pretreatment and subsequent enzymatic hydrolysis was compared to results for hydrothermal and dilute hydrochloric and sulfuric acid pretreatments. The highest total xylose yield of ∼84% of the theoretical maximum was for both 0.5% oxalic and sulfuric acid pretreatment at 160 °C, compared to ∼81% yield for hydrothermal pretreatment at 200 °C and for 0.5% hydrochloric acid pretreatment at 140 °C. The xylooligomer fraction from dilute oxalic acid pretreatment was only 6.3% of the total xylose in solution, similar to results with dilute hydrochloric and sulfuric acids but much lower than the ∼70% value for hydrothermal pretreatment. Combining any of the four pretreatments with enzymatic hydrolysis with 60 FPU cellulase/g of glucan plus xylan in the pretreated maple wood resulted in virtually the same total glucose plus xylose yields of ∼85% of the maximum possible.

  13. Comparison of Four Strong Acids on the Precipitation Potential of Gypsum in Brines During Distillation of Pretreated, Augmented Urine

    NASA Technical Reports Server (NTRS)

    Muirhead, Dean

    2011-01-01

    Two batches of nominally pretreated and augmented urine were prepared with the baseline pretreatment formulation of sulfuric acid and chromium trioxide. The urine was augmented with inorganic salts and organic compounds in order to simulate a urinary ionic concentrations representing the upper 95 percentile on orbit. Three strong mineral acids: phosphoric, hydrochloric, and nitric acid, were substituted for the sulfuric acid for comparison to the baseline sulfuric acid pretreatment formulation. Three concentrations of oxidizer in the pretreatment formulation were also tested. Pretreated urine was distilled to 85% water recovery to determine the effect of each acid and its conjugate base on the precipitation of minerals during distillation. The brines were analyzed for calcium and sulfate ion, total, volatile, and fixed suspended solids. Test results verified that substitution of phosphoric, hydrochloric, or nitric acids for sulfuric acid would prevent the precipitation of gypsum up to 85% recovery from pretreated urine representing the upper 95 percentile calcium concentration on orbit.

  14. Pretreatment of corn stover for sugar production using a two-stage dilute acid followed by wet-milling pretreatment process.

    PubMed

    Liu, Qiyu; Li, Wenzhi; Ma, Qiaozhi; An, Shengxin; Li, Minghao; Jameel, Hasan; Chang, Hou-Min

    2016-07-01

    A two-stage process was evaluated to increase sugar recovery. Firstly, corn stover was treated with dilute hydrochloric acid to recover the xylose, and then the residue was subjected to a wet-milling pretreatment. Dilute hydrochloric acid showed a high xylose recovery during the first stage. The optimal condition was 120°C and 40min for 0.7wt% dilute hydrochloric acid pretreatment followed by wet-milling pretreatment for 15min. The xylose and glucose yield were 81.0% and 64.0%, respectively, with a cellulase dosage at 3FPU/g of substrate. This two-stage process was effective on account of the removal of hemicelluloses in the first stage and the delamination of cell wall in the second stage, increasing the possibility of adsorption of cellulose to enzymes, and resulting in a high sugar recovery with a very low enzyme loading.

  15. Effect of chloride ions on the corrosion behavior of low-alloy steel containing copper and antimony in sulfuric acid solution

    NASA Astrophysics Data System (ADS)

    Park, Sun-Ah; Kim, Seon-Hong; Yoo, Yun-Ha; Kim, Jung-Gu

    2015-05-01

    The influence of the addition of HCl on the corrosion behavior of low-alloy steel containing copper and antimony was investigated using electrochemical (potentiodynamic and potentiostatic polarization tests, and electrochemical impedance spectroscopy) and weight loss tests in a 1.6M H2SO4 solution with different concentrations of hydrochloric acid (0.00, 0.08, 0.15 and 0.20 M HCl) at 60 °C. The result showed that the corrosion rate decreased with increasing HCl by the formation of protective layers. SEM, EDS and XPS examinations of the corroded surfaces after the immersion test indicated that the corrosion production layer formed in the solution containing HCl was highly comprised of metallic Cu, Cu chloride and metallic (Fe, Cu, Sb) compounds. The corrosion resistance was improved by the Cu-enriched layer, in which chloride ions are an accelerator for cupric ion reduction during copper deposition. Furthermore, cuprous and antimonious chloride species are complex salts for cuprous ions adsorbed on the surface during copper deposition.

  16. Comparison of Buffer Effect of Different Acids During Sandstone Acidizing

    NASA Astrophysics Data System (ADS)

    Umer Shafiq, Mian; Khaled Ben Mahmud, Hisham; Hamid, Mohamed Ali

    2015-04-01

    The most important concern of sandstone matrix acidizing is to increase the formation permeability by removing the silica particles. To accomplish this, the mud acid (HF: HCl) has been utilized successfully for many years to stimulate the sandstone formations, but still it has many complexities. This paper presents the results of laboratory investigations of different acid combinations (HF: HCl, HF: H3PO4 and HF: HCOOH). Hydrofluoric acid and fluoboric acid are used to dissolve clays and feldspar. Phosphoric and formic acids are added as a buffer to maintain the pH of the solution; also it allows the maximum penetration of acid into the core sample. Different tests have been performed on the core samples before and after the acidizing to do the comparative study on the buffer effect of these acids. The analysis consists of permeability, porosity, color change and pH value tests. There is more increase in permeability and porosity while less change in pH when phosphoric and formic acids were used compared to mud acid. From these results it has been found that the buffer effect of phosphoric acid and formic acid is better than hydrochloric acid.

  17. Mucosal acid causes gastric mucosal microcirculatory disturbance in nonsteroidal anti-inflammatory drug-treated rats.

    PubMed

    Funatsu, Toshiyuki; Chono, Koji; Hirata, Takuya; Keto, Yoshihiro; Kimoto, Aishi; Sasamata, Masao

    2007-01-05

    The mechanism by which nonsteroidal anti-inflammatory drugs (NSAIDs) suppress gastric mucosal blood flow is not fully understood, although the depletion of mucosal prostaglandin E2 has been proposed as one possible explanation. We investigated the role of gastric acid on gastric mucosal blood flow in NSAID-treated rats. A rat stomach was mounted in an ex vivo chamber, and gastric mucosal blood flow was measured sequentially in a 5-mm2 area of the gastric corpus using a scanning laser Doppler perfusion image system. Results showed that diclofenac (5 mg/kg s.c.) and indomethacin (10 mg/kg s.c.) did not affect gastric mucosal blood flow, although both strongly decreased mucosal prostaglandin E2 when saline was instilled into the gastric chamber. On replacement of the saline in the chamber with 100 mM hydrochloric acid, these drugs caused a decrease in gastric mucosal blood flow levels within 30 min. The specific cyclooxygenase (COX)-2 inhibitors celecoxib (50 mg/kg s.c.) and rofecoxib (25 mg/kg s.c.) did not affect mucosal prostaglandin E2 level, nor did they decrease gastric mucosal blood flow, even when hydrochloric acid was added to the chamber. Furthermore, measurement of vasoconstrictive factors present in the mucosa showed that endothelin-1 levels increased after administration of diclofenac s.c. in the presence of intragastric hydrochloric acid. This indicates that the presence of mucosal hydrochloric acid plays an important role in the NSAID-induced decrease in gastric mucosal blood flow, while the COX-1-derived basal prostaglandin E2, which is unlikely to control gastric mucosal blood flow itself, protects microcirculatory systems from mucosal hydrochloric acid.

  18. Exploring the Ideal Gas Law through a Quantitative Gasometric Analysis of Nitrogen Produced by the Reaction of Sodium Nitrite with Sulfamic Acid

    ERIC Educational Resources Information Center

    Yu, Anne

    2010-01-01

    The gasometric analysis of nitrogen produced in a reaction between sodium nitrite, NaNO[superscript 2], and sulfamic acid, H(NH[superscript 2])SO[superscript 3], provides an alternative to more common general chemistry experiments used to study the ideal gas law, such as the experiment in which magnesium is reacted with hydrochloric acid. This…

  19. Yeast genes involved in response to lactic acid and acetic acid: acidic conditions caused by the organic acids in Saccharomyces cerevisiae cultures induce expression of intracellular metal metabolism genes regulated by Aft1p.

    PubMed

    Kawahata, Miho; Masaki, Kazuo; Fujii, Tsutomu; Iefuji, Haruyuki

    2006-09-01

    Using two types of genome-wide analysis to investigate yeast genes involved in response to lactic acid and acetic acid, we found that the acidic condition affects metal metabolism. The first type is an expression analysis using DNA microarrays to investigate 'acid shock response' as the first step to adapt to an acidic condition, and 'acid adaptation' by maintaining integrity in the acidic condition. The other is a functional screening using the nonessential genes deletion collection of Saccharomyces cerevisiae. The expression analysis showed that genes involved in stress response, such as YGP1, TPS1 and HSP150, were induced under the acid shock response. Genes such as FIT2, ARN1 and ARN2, involved in metal metabolism regulated by Aft1p, were induced under the acid adaptation. AFT1 was induced under acid shock response and under acid adaptation with lactic acid. Moreover, green fluorescent protein-fused Aft1p was localized to the nucleus in cells grown in media containing lactic acid, acetic acid, or hydrochloric acid. Both analyses suggested that the acidic condition affects cell wall architecture. The depletion of cell-wall components encoded by SED1, DSE2, CTS1, EGT2, SCW11, SUN4 and YNL300W and histone acetyltransferase complex proteins encoded by YID21, EAF3, EAF5, EAF6 and YAF9 increased resistance to lactic acid. Depletion of the cell-wall mannoprotein Sed1p provided resistance to lactic acid, although the expression of SED1 was induced by exposure to lactic acid. Depletion of vacuolar membrane H+-ATPase and high-osmolarity glycerol mitogen-activated protein kinase proteins caused acid sensitivity. Moreover, our quantitative PCR showed that expression of PDR12 increased under acid shock response with lactic acid and decreased under acid adaptation with hydrochloric acid.

  20. Effects of organic acids on thermal inactivation of acid and cold stressed Enterococcus faecium.

    PubMed

    Fernández, Ana; Alvarez-Ordóñez, Avelino; López, Mercedes; Bernardo, Ana

    2009-08-01

    In this study the adaptative response to heat (70 degrees C) of Enterococcus faecium using fresh and refrigerated (at 4 degrees C for up to 1 month) stationary phase cells grown in Brain Heart Infusion (BHI) buffered at pH 7.4 (non-acid-adapted cells) and acidified BHI at pH values of 6.4 and 5.4 with acetic, ascorbic, citric, lactic, malic and hydrochloric acids (acid-adapted cells) was evaluated. In all cases, the survival curves obtained were concave upward. A mathematical model based on the Weibull distribution accurately described the inactivation kinetic. The results indicate that previous adaptation to a low pH increased the bacterial heat resistance, whereas the subsequent cold storage of cells reduced E. faecium thermal tolerance. Fresh acid-adapted cells showed t(2.5)-values (time needed to obtain an inactivation level of 2.5 log10 cycles) ranging from 2.57 to 9.51 min, while non-acid-adapted cells showed t(2.5)-values of 1.92 min. The extent of increased heat tolerance varied with the acid examined, resulting in the following order: citric > or = acetic > malic > or = lactic > hydrochloric > or = ascorbic. In contrast, cold storage progressively decreased E. faecium thermal resistance. The t(2.5) values found at the end of the period studied were about 2-3-fold lower than those corresponding to non-refrigerated cells, although this decrease was more marked (about 5-fold) when cells were grown in buffered BHI and BHI acidified at pH 5.4 with hydrochloric acid. These findings highlight the need for a better understanding of microbial response to various preservation stresses in order to increase the efficiency of thermal processes and to indicate the convenience of counterbalancing the benefits of the hurdle concept.

  1. Development of MegaCam, the next-generation wide-field imaging camera for the 3.6-m Canada-France-Hawaii Telescope

    NASA Astrophysics Data System (ADS)

    Boulade, Olivier; Charlot, Xavier; Abbon, P.; Aune, Stephan; Borgeaud, Pierre; Carton, Pierre-Henri; Carty, M.; Desforge, D.; Eppele, Dominique; Gallais, Pascal; Gosset, L.; Granelli, Remy; Gros, Michel; de Kat, Jean; Loiseau, Denis; Mellier, Yannick; Ritou, J. L.; Rousse, Jean Y.; Starzynski, Pierre; Vignal, Nicolas; Vigroux, Laurent G.

    2000-08-01

    MegaCam is the new wide-field imaging camera currently being built for the new prime focus of the 3.6m Canada-France- Hawaii Telescope. The camera will offer a 1 square degree field of view and is built around a mosaic of 40 2K by 4.5K CCD devices. The delivery of the CCDs is proceeding along the schedule, the project passe dits final design review and the realization phase started, for an expected delivery to CFHT in Summer 2001.

  2. Predictors of Variation in CYP2A6 mRNA, Protein, and Enzyme Activity in a Human Liver Bank: Influence of Genetic and Nongenetic Factors.

    PubMed

    Tanner, Julie-Anne; Prasad, Bhagwat; Claw, Katrina G; Stapleton, Patricia; Chaudhry, Amarjit; Schuetz, Erin G; Thummel, Kenneth E; Tyndale, Rachel F

    2017-01-01

    Cytochrome P450 2A6 CYP2A6: metabolizes several clinically relevant substrates, including nicotine, the primary psychoactive component in cigarette smoke. Smokers vary widely in their rate of inactivation and clearance of nicotine, altering numerous smoking phenotypes. We aimed to characterize independent and shared impact of genetic and nongenetic sources of variation in CYP2A6 mRNA, protein, and enzyme activity in a human liver bank (n = 360). For the assessment of genetic factors, we quantified levels of CYP2A6, cytochrome P450 oxidoreductase (POR), and aldo-keto reductase 1D1 (AKR1D1) mRNA, and CYP2A6 and POR proteins. CYP2A6 enzyme activity was determined through measurement of cotinine formation from nicotine and 7-hydroxycoumarin formation from coumarin. Donor DNA was genotyped for CYP2A6, POR, and AKR1D1 genetic variants. Nongenetic factors assessed included gender, age, and liver disease. CYP2A6 phenotype measures were positively correlated to each other (r values ranging from 0.47-0.88, P < 0.001). Female donors exhibited higher CYP2A6 mRNA expression relative to males (P < 0.05). Donor age was weakly positively correlated with CYP2A6 protein (r = 0.12, P < 0.05) and activity (r = 0.20, P < 0.001). CYP2A6 reduced-function genotypes, but not POR or AKR1D1 genotypes, were associated with lower CYP2A6 protein (P < 0.001) and activity (P < 0.01). AKR1D1 mRNA was correlated with CYP2A6 mRNA (r = 0.57, P < 0.001), protein (r = 0.30, P < 0.001), and activity (r = 0.34, P < 0.001). POR protein was correlated with CYP2A6 activity (r = 0.45, P < 0.001). Through regression analyses, we accounted for 17% (P < 0.001), 37% (P < 0.001), and 77% (P < 0.001) of the variation in CYP2A6 mRNA, protein, and activity, respectively. Overall, several independent and shared sources of variation in CYP2A6 activity in vitro have been identified, which could translate to variable hepatic clearance of nicotine.

  3. Levels of BMP-6 mRNA in goat ovarian follicles and in vitro effects of BMP-6 on secondary follicle development.

    PubMed

    Frota, Isana M A; Leitão, Cintia C F; Costa, José J N; van den Hurk, Robert; Saraiva, Márcia V A; Figueiredo, José R; Silva, José R V

    2013-08-01

    Expression of BMP-6 mRNA was quantified by real-time polymerase chain reaction (PCR) and the BMP-6 protein was demonstrated by immunohistochemistry in the primordial, primary, secondary, small and large antral follicles of goat. Furthermore, the influence of BMP-6 on increase in diameter, antrum formation and expression of BMP-6 and FSH-R in in vitro cultured secondary follicles was studied. Therefore, goat primordial, primary and secondary follicles, as well as small and large antral follicles were obtained and the mRNA levels of BMP-6 were quantified by PCR in real time. Expression of BMP-6 protein in goat follicles was demonstrated by immunohistochemistry. The influence of BMP-6 in the presence or absence of follicle-stimulating hormone (FSH) on both the development of secondary follicles and the expression of mRNA for BMP-6 and FSH-R was evaluated after 6 days of culture. Furthermore, the follicular diameter and the formation of the antrum were evaluated before and after 6 days of culture and compared by Kruskal-Wallis and chi-squared tests (P < 0.05), respectively. The results show that the level of mRNA for BMP-6 in primary and secondary follicles was significantly higher than in the primordial follicles (P < 0.05). Similar levels of BMP-6 mRNA were observed in cumulus-oocyte complexes and mural granulosa/theca cells from small and large antral follicles, respectively. BMP-6 protein was expressed in oocytes of all categories of follicles and in granulosa cells from secondary follicles onwards. Addition of BMP-6 to the culture medium increased the diameter of secondary follicles mainly by antrum formation after 6 days' culture, in the presence or absence of FSH (P < 0.05). Furthermore, addition of FSH resulted in increased levels of BMP-6 mRNA in these follicles (P < 0.05). Simultaneous administration of FSH and BMP-6 enhanced the levels of FSH receptor (FSH-R) mRNA (P < 0.05). It is concluded that BMP-6 mRNA is increased during transition from primordial to

  4. Mitotic apparatus: the selective extraction of protein with mild acid.

    PubMed

    Bibring, T; Baxandall, J

    1968-07-26

    The treatment of isolated mitotic apparatus with mild (pH 3) hydrochloric acid results in the extraction of less than 10 percent of its protein, accompanied by the selective morphological disappearance of the microtubules. The same extraction can be shown to dissolve outer doublet microtubules from sperm flagella. A protein with points of similarity to the flagellar microtubule protein is the major component of the extract from mitotic apparatus.

  5. Research for amino acids in lunar samples.

    NASA Technical Reports Server (NTRS)

    Gehrke, C. W.; Zumwalt, R. W.; Kuo, K.; Rash, J. J.; Aue , W. A.; Stalling, D. L.; Kvenvolden, K. A.; Ponnamperuma, C.

    1972-01-01

    The study was primarily directed toward the examination of Apollo 14 lunar fines for indigenous amino acids or materials which could be converted to amino acids on hydrolysis with 6 N hydrochloric acid. Initial experiments were conducted to confirm the integrity of the derivatization reactions and reagents, and to optimize the gas-liquid chromatographic (GLC) instrumental and chromatographic system for the separation and flame ionization detection of the amino acid derivatives. In studies on the recovery of amino acids added to lunar fines, low recoveries were obtained when 10 ng of each amino acid were added to 50 mg of virgin fines, but the subsequent addition of 50 ng of each to the previously extracted sample resulted in much higher recoveries.

  6. The removal of uranium from acidic media using ion exchange and/or extraction chromatography

    SciTech Connect

    FitzPatrick, J.R.; Schake, B.S.; Murphy, J.; Holmes, K; West, M.H.

    1996-06-01

    The separation and purification of uranium from either nitric acid or hydrochloric acid media can be accomplished by using either solvent extraction or ion-exchange. Over the past two years at Los Alamos, emerging programs are focused on recapturing the expertise required to do limited, small-quantity processing of enriched uranium. During this period of time, we have been investigating ion-addition, waste stream polishing is associated with this effort in order to achieve more complete removal of uranium prior to recycle of the acid. Extraction chromatography has been demonstrated to further polish the uranium from both nitric and hydrochloric acid media thus allowing for a more complete recovery of the actinide material and creation of less waste during the processing steps.

  7. The influence of a 6 mT static magnetic field on apoptotic cell phagocytosis depends on monocyte/macrophage differentiation.

    PubMed

    Dini, Luciana; Panzarini, Elisa

    2010-12-01

    In a previous work we showed that a 6 mT static magnetic field (SMF) interferes with monocyte/macrophage 12-O-tetradecanoylphorbol-13-acetate (TPA)-induced differentiation of promonocytes (U937 cells) and monocytes (THP-1 cells). In this study we investigated whether in the same cells and under the same conditions, phagocytosis of apoptotic cells is influenced by 6 mT SMF exposure. Fluid phase endocytosis and phagocytosis of latex particles were also analyzed for comparison. The results indicate that SMF exposure has effects on phagocytosis but not on fluid phase endocytosis, and that these effects are greater at the late stages of macrophage differentiation (THP-1 > U937 cells). The phagocytosis index and rate of phagocytosis decreased under SMF exposure while the number of latex particles bound to the plasma membrane of TPA-differentiated U937 and THP-1 cells increased. Conversely, the rate of phagocytosis of apoptotic cells increased under SMF exposure, while the number of apoptotic cells bound to the plasma membrane of isolated human Kupffer cells, Raw 264.7 macrophages and TPA-differentiated THP-1 and U937 cells decreased. In non-differentiated U937 and THP-1 cells, the SMF exposure enhanced the number of cell-surface bound apoptotic cells and latex beads.

  8. On the growth of nitric and sulfuric acid aerosol particles under stratospheric conditions

    NASA Technical Reports Server (NTRS)

    Hamill, Patrick; Turco, R. P.; Toon, O. B.

    1988-01-01

    A theory for the formation of frozen aerosol particles in the Antarctic stratosphere was developed and applied to the formation of polar stratospheric clouds. The theory suggests that the condensed ice particles are composed primarily of nitric acid and water, with small admixtures of sulfuric and hydrochloric acids in solid solution. The proposed particle formation mechanism is in agreement with the magnitude and seasonal behavior of the optical extinction observed in the winter polar stratosphere.

  9. Effect of surface acidic oxides of activated carbon on adsorption of ammonia.

    PubMed

    Huang, Chen-Chia; Li, Hong-Song; Chen, Chien-Hung

    2008-11-30

    The influence of surface acidity of activated carbon (AC) was experimentally studied on adsorption of ammonia (NH(3)). Coconut shell-based AC was modified by various acids at different concentrations. There were five different acids employed to modified AC, which included nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid, and acetic acid. Acidic functional groups on the surface of ACs were determined by a Fourier transform infrared spectrograph (FTIR) and by the Boehm titration method. Specific surface area and pore volume of the ACs were measured by a nitrogen adsorption apparatus. Adsorption amounts of NH(3) onto the ACs were measured by a dynamic adsorption system at room temperature according to the principle of the ASTM standard test method. The concentration of NH(3) in the effluent stream was monitored by a gas-detecting tube technique. Experimental results showed that adsorption amounts of NH(3) on the modified ACs were all enhanced. The ammonia adsorption amounts on various activated carbons modified by different acids are in the following order: nitric acid>sulfuric acid>acetic acid approximately phosphoric acid>hydrochloric acid. It is worth to note that the breakthrough capacity of NH(3) is linearly proportional to the amount of acidic functional groups of the ACs.

  10. Shear bond strength of resin to acid/pumice-microabraded enamel.

    PubMed

    Royer, M A; Meiers, J C

    1995-01-01

    The effect of enamel microabrasion techniques consisting of either 18% hydrochloric acid in pumice or a commercially available abrasive/10% hydrochloric acid mixture, PREMA, on composite/enamel shear bond strengths was investigated. Sixty extracted third molars had the bonding surface flattened and were divided into six treatment groups (n=10) with the enamel treated prior to bonding as follows: Group 1-- untreated; Group 2--37% phosphoric acid etched for 30 seconds; Group 3--18% hydrochloric acid/pumice mixture applied for five 20-second treatments; Group 4--similar to Group 3 with additional 37% phosphoric acid etch; Group 5--treated with PREMA compound applied for five 20-second treatments; Group 6--similar to Group 5 treatment with additional 37% phosphoric acid. Herculite XR composite resin was then bonded to all samples using a VLC unit. Samples were tested in shear, and fractured enamel surfaces were evaluated using light microscopy to determine the enamel-to-resin failures. Resin bond strengths to microabraded and H3PO4-etched enamel were similar to bond strengths of untreated H3PO4-etched enamel and were significantly better than bond strengths to PREMA-treated or unetched enamel.

  11. Synthesis and magnetic properties of new tellurate compounds Na4MTeO6 (M = Co and Ni) with a ferromagnetic spin-chain structure.

    PubMed

    He, Zhangzhen; Guo, Wenbin; Cui, Meiyan; Tang, Yingying

    2017-03-31

    New tellurate compounds Na4MTeO6 (M = Co and Ni) were synthesized by a conventional high-temperature solid-state reaction. The title compounds crystallize in the monoclinic system of a space group P2/c and the triclinic system of a space group P1[combining macron], respectively. Both compounds exhibit a zigzag spin-chain structure, in which Na4CoTeO6 shows uniform chains built by Co(2+) ions and Na4NiTeO6 shows alternating chains built by Ni(2+) ions. Magnetic measurements confirm that Na4CoTeO6 and Na4NiTeO6 possess an antiferromagnetic ordering at TN = ∼3 K and ∼6.5 K, respectively, while a metamagnetic transition can be observed in the magnetization curve with an increasing field at 2 K.

  12. Test Results of LARP 3.6 m Nb3Sn Racetrack Coils Support by Full-length and Segmented Shell Structures

    SciTech Connect

    Muratore, Joseph F.; Ambrosio, Giorgio; Anerella, Michael; Barzi, Emanuela; Bossert, Rodger; Caspi, Shlomo; Cheng, D. W.; Cozzolino, John; Dietderich, Daniel R.; Escallier, John; Feher, Sandor; Felice, Helene; Ferracin, Paolo; Ganetis, George; Ghosh, Arup K.; Gupta, Ramesh C.; Hafalia, A. R.; Hannaford, C. R.; Joshi, Piyush; Kovach, Paul; Lietzke, A. F.; Louie, Wing; Marone, Andrew; McInturff, Al D.; Nobrega, F.; Sabbi, GianLuca; Schmalzle, Jesse; Thomas, Richard; Turrioni, Daniele; Wanderer, Peter

    2008-08-17

    As part of the LHC Accelerator Research Program (LARP) to build a high performance quadrupole magnet with Nb{sub 3}Sn conductor, a pair of 3.6 m-long Nb{sub 3}Sn racetrack coils has been made at Brookhaven National Laboratory (BNL) and installed in two shell-type support structures built by Lawrence Berkeley National Laboratory (LBL). These magnet assemblies have been tested at 4.5 K at BNL to gauge the effect of extended length and prestress on the mechanical performance of the long structure compared to earlier short models. This paper presents the results of quench testing and compares the overall performance of the two versions of the support structure. We also summarize the shell strain measurements and discuss the variation of quench current with ramp rate.

  13. Stabilization of the chiral phase of the SU (6 m ) Heisenberg model on the honeycomb lattice with m particles per site for m larger than 1

    NASA Astrophysics Data System (ADS)

    Dufour, Jérôme; Mila, Frédéric

    2016-09-01

    We show that, when N is a multiple of 6 (N =6 m , where m is an integer), the SU (N) Heisenberg model on the honeycomb lattice with m particles per site has a clear tendency toward chiral order as soon as m ≥2 . This conclusion has been reached by a systematic variational Monte Carlo investigation of Gutzwiller projected wave functions as a function of m between the case of one particle per site (m =1 ), for which the ground state has recently been shown to be in a plaquette singlet state, and the m →∞ limit, where a mean-field approach has established that the ground state has chiral order. This demonstrates that the chiral phase can indeed be stabilized for not too large values of m , opening the way to its experimental realizations in other lattices.

  14. Yellow-green luminescence and extreme thermal quenching in the Sr6M2Al4O15:Eu2+ (M = Y, Lu, Sc) phosphor series

    NASA Astrophysics Data System (ADS)

    Duke, Anna C.; Finley, Erin; Hermus, Martin; Brgoch, Jakoah

    2016-10-01

    A series of Eu2+-substituted yellow-green emitting phosphors based on the compound, Sr6M2Al4O15 (M = Y, Lu, Sc) were identified as potential efficient phosphors based on their high calculated Debye temperatures (ΘD > 450 K), which acts as a proxy for photoluminescent quantum yield (PLQY). The crystal structure contains corner-sharing [MO6] octahedra and [AlO4] tetrahedra leading to a highly connected, densely packed crystal structure. However, contrary to prediction, these compounds all showed a low PLQY (<6.5%) at room temperature. Temperature dependent luminescence measurements indicate that the photoluminescence is intense at 80 K but loses ≈90% of the emission intensity by room temperature, with the thermal quenching temperature (T50) occurring well below room temperature. These results suggest that even though Debye temperature (ΘD) is a valid proxy for PLQY, it does not describe thermal quenching.

  15. Expression of cytokines by human astrocytomas following stimulation by C3a and C5a anaphylatoxins: specific increase in interleukin-6 mRNA expression.

    PubMed

    Sayah, S; Ischenko, A M; Zhakhov, A; Bonnard, A S; Fontaine, M

    1999-06-01

    C3a and C5a anaphylatoxins are two proinflammatory peptides generated during complement activation that act through distinct Gi protein-coupled receptors named C3aR and C5aR, respectively. We have demonstrated previously that human astrocytes expressed C3aR and C5aR constitutively and were able to produce a functional complement. In this study, we examined the effect of an anaphylatoxin stimulation on cytokine expression by human astrocyte cell lines. Interleukin (IL)-1beta, IL-6, tumor necrosis factor-alpha, and transforming growth factor-beta mRNA expression was studied by quantitative RT-PCR. Whereas IL-1beta, tumor necrosis factor-alpha, and transforming growth factor-beta mRNA levels remained unchanged, stimulation of astrocytoma cells (T98G, CB193, U118MG) by C3a, C5a, and peptidic C3aR and C5aR agonists induced an increase in the IL-6 mRNA level. The amount of IL-6 was markedly increased at 3 and 6 h and returned to the basal level at 9 h of stimulation. This response was specific, because pretreatment of cells with pertussis toxin or with polyclonal anti-C3aR or anti-C5aR antibodies completely blocked the IL-6 mRNA increase. The IL-6 response was also investigated at the protein level, but IL-6 protein was detected neither in cell lysates nor in supernatants of stimulated cells. The anaphylatoxin-mediated transcriptional activation of IL-6 gene suggests that C3a and C5a could play a role in priming glial cells during the inflammatory process in the brain.

  16. Synthesis, structure, and magnetic properties of novel B-site ordered double perovskites, SrLaMReO6 (M = Mg, Mn, Co and Ni).

    PubMed

    Thompson, Corey M; Chi, Lisheng; Hayes, John R; Hallas, Alannah M; Wilson, Murray N; Munsie, Timothy J S; Swainson, Ian P; Grosvenor, Andrew P; Luke, Graeme M; Greedan, John E

    2015-06-21

    Four new double perovskites, SrLaMReO(6) (M = Mg, Mn, Co, Ni) in which Re(5+) (5d(2)) is present, were prepared via conventional solid state reactions and characterized by X-ray and neutron powder diffraction, XANES, SQUID magnetometry, and muon spin relaxation (μSR). Synchrotron X-ray and neutron diffraction experiments confirmed that all compounds crystallize in the monoclinic P2(1)/n structure type, which consists of alternately corner-shared octahedra of MO(6) and ReO(6). Rietveld refinement results indicated anti-site mixing of less than 7% on the M/Re sites. Bond valence sum calculations (BVS) suggest all M and Re ions are 2+ and 5+, respectively, and for the Mn-containing phase this is also supported by XANES measurements. All of the materials are paramagnetic at room-temperature and their Curie-Weiss temperatures are positive (except for Mg) indicating net ferromagnetic interactions. No evidence for long-range magnetic order is evident in the dc magnetic susceptibility and μSR measurements for SrLaMgReO(6) to 2 K. The Mn-phase shows long-range order at T(C) = 190 K and neutron diffraction revealed a ferromagnetic structure with a refined net moment of ∼3.7μ(B). Both Co- and Ni-containing phases exhibit spin glass behavior at T(G) = 23 and 30 K, respectively, which is supported by neutron diffraction and a.c. susceptibility data. The structure and physical properties of these four new rhenium based ordered double perovskites are compared to the closely related "pillared perovskites", La(5)Re(3)MO(16), the isoelectronic Os(6+) (5d(2)) double perovskite Sr(2)CoOsO(6), and the Re(6+) (5d(1)) double perovskites, Sr(2)MReO(6), (M = Mg, Ca, Mn, Co, Ni).

  17. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; comparison of a nitric acid in-bottle digestion procedure to other whole-water digestion procedures

    USGS Publications Warehouse

    Garbarino, John R.; Hoffman, Gerald L.

    1999-01-01

    A hydrochloric acid in-bottle digestion procedure is used to partially digest wholewater samples prior to determining recoverable elements by various analytical methods. The use of hydrochloric acid is problematic for some methods of analysis because of spectral interference. The inbottle digestion procedure has been modified to eliminate such interference by using nitric acid instead of hydrochloric acid in the digestion. Implications of this modification are evaluated by comparing results for a series of synthetic whole-water samples. Results are also compared with those obtained by using U.S. Environmental Protection Agency (1994) (USEPA) Method 200.2 total-recoverable digestion procedure. Percentage yields that use the nitric acid inbottle digestion procedure are within 10 percent of the hydrochloric acid in-bottle yields for 25 of the 26 elements determined in two of the three synthetic whole-water samples tested. Differences in percentage yields for the third synthetic whole-water sample were greater than 10 percent for 16 of the 26 elements determined. The USEPA method was the most rigorous for solubilizing elements from particulate matter in all three synthetic whole-water samples. Nevertheless, the variability in the percentage yield by using the USEPA digestion procedure was generally greater than the in-bottle digestion procedure, presumably because of the difficulty in controlling the digestion conditions accurately.

  18. Switching from antiferromagnetic to ferromagnetic coupling in heptanuclear [M(t)6M(c)](n+) complexes by going from an achiral to a chiral triplesalen ligand.

    PubMed

    Mukherjee, Chandan; Hoeke, Veronika; Stammler, Anja; Bögge, Hartmut; Schnack, Jürgen; Glaser, Thorsten

    2014-07-07

    The chiral triplesalen ligand H6chand(RR) has been used to synthesize the chiral heptanuclear complexes [{(chand(RR))Mn(III)3}2{Fe(II)(CN)6}](ClO4)2 ((RR)[Mn(III)6Fe(II)](ClO4)2) and [{(chand(RR))Fe(III)3}2{Fe(II)(CN)6}](ClO4)2 ((RR)[Fe(III)6Fe(II)](ClO4)2), which have been characterized by single-crystal X-ray diffraction, mass spectrometry, elemental analysis, FT-IR, Mössbauer, and UV-vis spectroscopies, electrochemistry, as well as DC and AC magnetic susceptibility measurements. The half-wave potential of the Fe(III)/Fe(II) couple in (RR)[Mn(III)6Fe(II)](2+) and (RR)[Fe(III)6Fe(II)](2+) is E1/2 = +0.21 and +0.75 V vs. Fc(+)/Fc, respectively, which (i) corresponds to a strong stabilization of the reduced Fe(II) species compared to the redox couple of free [Fe(II/III)(CN)6](4-/3-) and (ii) indicates a significant difference of the electronic coupling with the {(chand(RR))M(t)}(3+) units (M(t) = Mn(III), Fe(III)). Analysis of the DC magnetic data (μeffvs. T, VTVH) of both complexes by a full-matrix diagonalization of the spin-Hamiltonian including isotropic exchange, zero-field splitting with full consideration of the relative orientation of the D tensors and Zeeman interactions reveals ferromagnetic interactions of JMn-Mn = +0.17 ± 0.02 cm(-1) with DMn = -3.4 ± 0.3 cm(-1) for (RR)[Mn(III)6Fe(II)](2+) and JFe-Fe = +0.235 ± 0.005 cm(-1) with DFe = 0 for (RR)[Fe(III)6Fe(II)](2+). The comparison of the molecular structures of (RR)[Mn(III)6Fe(II)](2+) and (RR)[Fe(III)6Fe(II)](2+) with those of the heptanuclear complexes [M(t)6M(c)](n+) using the achiral triplesalen ligand (talen(t-Bu2))(6-) reveals significant differences in the ligand folding, smaller C-C bond distances in the central phloroglucinol ring and larger HOMA values. This indicates more aromatic character and less heteroradialene contribution in (RR)[Mn(III)6Fe(II)](2+) and (RR)[Fe(III)6Fe(II)](2+), which explains the switching from antiferromagnetic coupling in [M(t)6M(c)](n+) to ferromagnetic

  19. A review on methods of recovery of acid(s) from spent pickle liquor of steel industry.

    PubMed

    Ghare, N Y; Wani, K S; Patil, V S

    2013-04-01

    Pickling is the process of removal of oxide layer and rust formed on metal surface. It also removes sand and corrosion products from the surface of metal. Acids such as sulfuric acid, hydrochloric acid are used for pickling. Hydrofluoric acid-Nitric acid mixture is used for stainless steel pickling. Pickling solutions are spent when acid concentration in pickling solutions decreases by 75-85%, which also has metal content up to 150-250 g/ dm3. Spent pickling liquor (SPL) should be dumped because the efficiency of pickling decreases with increasing content of dissolved metal in the bath. The SPL content depends on the plant of origin and the pickling method applied there. SPL from steel pickling in hot-dip galvanizing plants contains zinc(II), iron, traces of lead, chromium. and other heavy metals (max. 500 mg/dm3) and hydrochloric acid. Zinc(II) passes tothe spent solution after dissolution of this metal from zinc(II)-covered racks, chains and baskets used for transportation of galvanized elements. Unevenly covered zinc layers are usually removed in another pickling bath. Due to this, zinc(II) concentration increases even up to 110 g/dm3, while iron content may reach or exceed even 80 g/dm3 in the same solution. This review presents an overview on different aspects of generation and treatment of SPL with recourse to recovery of acid for recycling. Different processes are described in this review and higher weightage is given to membrane processes.

  20. Corrosion Behavior of Nickel Alloys in Wet Hydrofluoric Acid

    SciTech Connect

    Rebak, R B

    2004-02-06

    Hydrofluoric acid is a water solution of hydrogen fluoride (HF). Hydrofluoric acid is used widely in diverse types of industrial applications; traditionally, it is used in pickling solutions in the metal industry, in the fabrication of chlorofluorocarbon compounds, as an alkylation agent for gasoline and as an etching agent in the industry of glass. In recent years, hydrofluoric acid has extensively been used in the manufacture of semiconductors and microelectronics during the wet chemical cleaning of silicon wafers. Hydrofluoric acid can be considered a reducing acid and although it is chemically classified as weaker than, for example, sulfuric or hydrochloric acids, it is extremely corrosive. This acid is also particularly toxic and poses greater health hazard than most other acids. The corrosion behavior of metals in hydrofluoric acid has not been as systematic studied in the laboratory as for other common inorganic acids. This is largely because tests using hydrofluoric acid cannot be run in standard equipment and because of the toxic nature of this acid. Moreover, short-term weight loss laboratory corrosion tests in hydrofluoric acid can be frustrating since the results are not as highly reproducible as in the case of other acids such as sulfuric or hydrochloric. One of the reasons is because hydrofluoric acid commonly attacks the coupons used for testing in a non-uniform manner. That is, the corrosive power of this acid is not aimed to uniform thinning but mostly to localized penetration below the skin of the metal in the form of thin cracks, voids, pits, trenches and sometimes intergranular attack. Figure 1 shows the cross section of a coupon of Alloy 600 (N06600) exposed for 336 h to the vapor phase of a solution of 20% HF at 93 C. In cases where internal penetration occurs such as in Figure 1, it may not be recommended to use corrosion rates based on weight loss for material selection.

  1. Trypanosoma brucei ATPase subunit 6 mRNA bound to gA6-14 forms a conserved three-helical structure

    PubMed Central

    Reifur, Larissa; Koslowsky, Donna J.

    2008-01-01

    T. brucei survival relies on the expression of mitochondrial genes, most of which require RNA editing to become translatable. In trypanosomes, RNA editing involves the insertion and deletion of uridylates, a developmentally regulated process directed by guide RNAs (gRNAs) and catalyzed by the editosome, a complex of proteins. The pathway for mRNA/gRNA complex formation and assembly with the editosome is still unknown. Work from our laboratory has suggested that distinct mRNA/gRNA complexes anneal to form a conserved core structure that may be important for editosome assembly. The secondary structure for the apocytochrome b (CYb) pair has been previously determined and is consistant with our model of a three-helical structure. Here, we used cross-linking and solution structure probing experiments to determine the structure of the ATPase subunit 6 (A6) mRNA hybridized to its cognate gA6-14 gRNA in different stages of editing. Our results indicate that both unedited and partially edited A6/gA6-14 pairs fold into a three-helical structure similar to the previously characterized CYb/gCYb-558 pair. These results lead us to conclude that at least two mRNA/gRNA pairs with distinct editing sites and distinct primary sequences fold to a three-helical secondary configuration that persists through the first few editing events. PMID:18772247

  2. Blazar variability studies with the 1.3m Robotically Controlled Telescope and the automated 0.6m Bell Observatory telescope

    NASA Astrophysics Data System (ADS)

    Carini, M. T.; Barnaby, D.; Mattox, J. R.; Walters, R.; Poteet, C.; Wills, W.; Gelderman, R.; Davis, D.; Everett, M.; Guinan, E.; Howell, S.; McGruder, C. H., III

    2004-10-01

    One of the key programs on the 1.3m Robotically Controlled Telescope (RCT) located at Kitt Peak National Observatory and the 0.6m telescope at the Bell Observatory operated by Western Kentucky University is a study of the variability of the class of Active Galactic Nuclei (AGN) known as Blazars. Blazars are highly variable on timescales of minutes to decades and this variability is seen across the electromagnetic spectrum. In addition, they display a featureless spectrum, thus continuum variability provides the only diagnostic of these objects. Variability provides information on the size of the emission region responsible for the observed variations and when observations are obtained at multiple wavelengths, it can be used to discriminate between emission models. However, traditional ground based observations are limited in a variety of ways. We will discuss how an automated facility, with time dedicated to this astrophysically interesting problem, can overcome many of these limitations, and we show results from the Bell Observatory as well as some of the first results of Blazar observations from the RCT.

  3. Crystal structure, spectroscopy and thermodynamic properties of M{sup I}VWO{sub 6}(M{sup I} - Li, Na)

    SciTech Connect

    Knyazev, Aleksandr V.; Smirnova, Nataliya N.; Kuznetsova, Nataliya Yu.; Letyanina, Irene A.

    2009-11-15

    In the present work lithium (sodium) vanadium tungsten oxides with brannerite structure is refined by the Rietveld method (space group C2/m, Z=2). IR and Raman spectroscopy was used to assign vibrational bands and determine structural particularities. The diffuse reflectance spectra allow to calculate bandgap for M{sup I}VWO{sub 6}(M{sup I} - Li, Na). The temperature dependences of heat capacity have been measured first in the range from 7 to 350 K for these compounds and then between 330 and 640 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p}{sup o}(T), enthalpy H{sup o}(T)-H{sup o}(0), entropy S{sup o}(T)-S{sup o}(0) and Gibbs function G{sup o}(T)-H{sup o}(0), for the range from T->0 to 640 K. The differential scanning calorimetry was applied to measure decomposition temperature of compounds under study. - Graphical abstract: Fragment of the structure of Li(Na)VWO{sub 6}.

  4. Stability and crystal chemistry of the ternary borides M2(Ni21-xMx)B6 (M tbnd Ti, Zr, Hf)

    NASA Astrophysics Data System (ADS)

    Artini, C.; Provino, A.; Valenza, F.; Pani, M.; Cacciamani, G.

    2016-01-01

    A crystallochemical study was undertaken to investigate the structural stability and the compositional extent of the ternary borides M2(Ni21-xMx)B6 (M tbnd Ti, Zr, Hf). This phase often occurs during the production of MB2 joints by means of Ni-B brazing alloys. Samples with the nominal compositions M2Ni21B6 and M3Ni20B6 were synthesized by arc melting and characterized by optical and electron microscopy, and X-ray diffraction. Crystal structure refinements were performed by the Rietveld method. The compositional boundaries of the ternary phases were experimentally determined and found strictly related to the M/Ni size ratio. The stability of this structure is mainly determined by the capability of the structure to expand under the effect of the Ni substitution by the M atom. The CALPHAD modeling of the three M-Ni-B ternary systems in the Ni-rich corner of the phase diagram, performed on the basis of the obtained structural data, shows a good agreement with experimental results.

  5. First principle study on electronic structure, structural phase stability, optical and vibrational properties of Ba2ScMO6 (M = Nb, Ta)

    NASA Astrophysics Data System (ADS)

    Rameshe, Balasubramaniam; Murugan, Ramaswamy; Palanivel, Balan

    2016-12-01

    First principle calculations are performed to investigate the electronic structure, structural phase stability, optical and vibrational properties of double perovskite oxide semiconductors namely Ba2ScMO6 (M = Nb, Ta) in the cubic symmetry using WIEN2k. In order to study the ground state properties of these compounds, the total energies are calculated as a function of reduced volumes and fitted with Brich Murnaghan equation. The estimated ground state parameters are comparable with the available experimental data. Calculations of electronic band structure on these compounds reveal that both Ba2ScNbO6 and Ba2ScTaO6 exhibit a semiconducting behavior with a direct energy gap of 2.78 and 3.15 eV, respectively. To explore the optical transitions in these compounds, the real and imaginary parts of the dielectric function, refractive index, extinction coefficient, reflectivity, optical absorption coefficient, real part of optical conductivity and the energy-loss function are calculated at ambient pressure and analyzed. The collective Raman active modes of the atoms of these materials are also calculated in order to understand the structural stability of these compounds.

  6. Design and development of control unit and software for the ADFOSC instrument of the 3.6 m Devasthal optical telescope

    NASA Astrophysics Data System (ADS)

    Kumar, T. S.

    2016-08-01

    In this paper, we describe the details of control unit and GUI software for positioning two filter wheels, a slit wheel and a grism wheel in the ADFOSC instrument. This is a first generation instrument being built for the 3.6 m Devasthal optical telescope. The control hardware consists of five electronic boards based on low cost 8-bit PIC microcontrollers and are distributed over I2C bus. The four wheels are controlled by four identical boards which are configured in I2C slave mode while the fifth board acts as an I2C master for sending commands to and receiving status from the slave boards. The master also communicates with the interfacing PC over TCP/IP protocol using simple ASCII commands. For moving the wheels stepper motors along with suitable amplifiers have been employed. Homing after powering ON is achieved using hall effect sensors. By implementing distributed control units having identical design modularity is achieved enabling easier maintenance and upgradation. A GUI based software for commanding the instrument is developed in Microsoft Visual C++. For operating the system during observations the user selects normal mode while the engineering mode is available for offering additional flexibility and low level control during maintenance and testing. A detailed time-stamped log of commands, status and errors are continuously generated. Both the control unit and the software have been successfully tested and integrated with the ADFOSC instrument.

  7. Structural and magnetic properties of Prussian blue analogue molecular magnet Fe1.5[Cr(CN)6].mH2O

    NASA Astrophysics Data System (ADS)

    Bhatt, Pramod; Meena, S. S.; Mukadam, M. D.; Yusuf, S. M.

    2016-05-01

    Molecular magnets, based on Prussian blue analogues, Fe1.5[Cr(CN)6].mH2O have been synthesized in the bulk as well as nanoparticle forms using a co-precipitation method, and their structural and magnetic properties have been investigated using x-ray diffraction (XRD) Mössbauer spectroscopy and dc magnetization. The XRD study confirms the single phase crystalline and nanoparticle nature of the compounds with a face centered cubic (fcc) structure of space group Fm3m. The values of lattice constant are found to be ~10.18(5) Å and ~9.98(9)Å, for the bulk and nanoparticle samples, respectively. The dc magnetization shows a Curie temperature (TC) of ~17 K and ~5 K for the bulk and nanopartcile samples, respectively. The Mossouber spectroscopy reveal that the compound shows spin flipping from the high spin (HS) Fe (CrIII-C≡N-FeII) to low spin (LS) FeII ions (CrIII-N≡C-FeII). Moreover, the TC and the HS state of the Fe ions decreases (converts to its LS states) with time as well as in the nanoparticle form compared to bulk.

  8. Stern-Gerlach experiments of one-dimensional metal-benzene sandwich clusters: Mn(C6H6)m (M = Al, Sc, Ti, and V).

    PubMed

    Miyajima, Ken; Yabushita, Satoshi; Knickelbein, Mark B; Nakajima, Atsushi

    2007-07-11

    A molecular beam of multilayer metal-benzene organometallic clusters Mn(C6H6)m (M = Al, Sc, Ti, and V) was produced by a laser vaporization synthesis method, and their magnetic deflections were measured. Multidecker sandwich clusters of transition-metal atoms and benzene Scn(C6H6)n+1 (n = 1, 2) and Vn(C6H6)n+1 (n = 1-4) possess magnetic moments that increase monotonously with n. The magnetic moments of Al(C6H6), Scn(C6H6)n+1, and Vn(C6H6)n+1 are smaller than that of their spin-only values as a result of intracluster spin relaxation, an effect that depends on the orbital angular momenta and bonding characters of the orbitals containing electron spin. While Ti(C6H6)2 was found to be nonmagnetic, Tin(C6H6)n+1 (n = 2, 3) possess nonzero magnetic moments. The mechanism of ferromagnetic spin ordering in M2(C6H6)3 (M = Sc, Ti, V) is discussed qualitatively in terms of molecular orbital analysis. These sandwich species represent a new class of one-dimensional molecular magnets in which the transition-metal atoms are formally zerovalent.

  9. Electrical conductivity and impedance spectroscopy studies of cerium based aeschynite type semiconducting oxides: CeTiMO6 (M=Nb or Ta)

    NASA Astrophysics Data System (ADS)

    Sumi, S.; Rao, P. Prabhakar; Deepa, M.; Koshy, Peter

    2010-09-01

    Complex ceramic oxides, CeTiMO6 (M=Nb or Ta) having aeschynite type mineral structure were prepared by the conventional ceramic route. Complex impedance analysis in the frequency range 10 Hz-1 MHz over a wide temperature range (30-600 °C) indicates the presence of grain boundary effect along with the bulk contribution and also confirms the presence of non-Debye type of multiple relaxations in the material. The frequency dependent conductivity plots exhibit double power law dependence suggesting three types of conduction mechanisms: low frequency (10 Hz-1 kHz) conductivity owing to long range translational motion of electrons (frequency independent), mid-frequency conductivity (1-10 kHz) due to short-range hopping, and high frequency (10 kHz-1 MHz) conduction due to localized orientation hopping mechanism. The hopping model can explain the nature of the conduction mechanism completely. The electrical conductivity measurements with temperature suggest the negative temperature coefficient of resistance behavior. The activation energy studies allow insight into the nature of the conduction mechanisms.

  10. Effects of organic and inorganic acids on phosphorus release from municipal sludge.

    PubMed

    Pakdil, N B; Filibeli, A

    2007-01-01

    This paper reports on the effects of inorganic acids (sulphuric acid, hydrochloric acid, nitric acid) and organic acids (citric acid, oxalic acids) for phosphorus recovery from sludge and struvite precipitation results. It was observed that both inorganic acid and organic acids were effective at phosphorus release. The studies on precipitation of released phosphorus from sludge as magnesium ammonium phosphate (struvite) were also done using nitric and oxalic acids. Phosphorus and heavy metals of leachate were analyzed before and after precipitation. It was observed that heavy metal concentrations in the extracted samples decrease after precipitation. Precipitation was accomplished by using extract derived with nitric acid; however, in oxalic acid applications, it was not achieved. When the chemical constituents of the dried material were examined oxygen, sodium and nitrogen were found to be the major elements.

  11. [A phase II pharmacological study of leuprolide acetate 6-month depot, TAP-144-SR (6M), in treatment-Nazve patients with prostatic cancer who received a single subcutaneous or intramuscular injection].

    PubMed

    Komura, Emiko; Fujimoto, Tsukasa; Takabayashi, Nobuyoshi; Okamoto, Hiroyuki; Akaza, Hideyuki

    2014-05-01

    The aim of this phase II study was to evaluate the pharmacokinetics, pharmacodynamics, efficacy, and safety of a 6- month depot formulation of a luteinizing hormone-releasing hormone (LH-RH) agonist, TAP-144-SR (6M), in Japanese treatment-naÏve patients with prostatic cancer. Each subject received a single subcutaneous or intramuscular injection of TAP- 144-SR (6M) and was monitored for 24 weeks. The primary endpoint was the change in serum testosterone levels. The serum testosterone level in six subjects who received 22.5 mg of TAP-144 (SR) subcutaneously decreased below the castrate level after 4 weeks and remained suppressed during the 24 weeks of follow-up. With regard to safety, TAP-144-SR (6M)was not associated with any additional concerns compared to those reported for the approved 1-month and 3-month depot formulations of TAP-144-SR. In addition, 30 mg of TAP-144-SR (6M) was administered subcutaneously to six subjects, and, on the basis of the results, the optimal clinical dosage of TAP-144-SR (6M) in Japan was considered to be 22.5 mg. Outcomes with 22.5mg TAP-144-SR (6M) administered intramuscularly were similar to those with TAP-144-SR (6M) administered subcutaneously.

  12. Acid hydrolysis of sugarcane bagasse for lactic acid production.

    PubMed

    Laopaiboon, Pattana; Thani, Arthit; Leelavatcharamas, Vichean; Laopaiboon, Lakkana

    2010-02-01

    In order to use sugarcane bagasse as a substrate for lactic acid production, optimum conditions for acid hydrolysis of the bagasse were investigated. After lignin extraction, the conditions were varied in terms of hydrochloric (HCl) or sulfuric (H(2)SO(4)) concentration (0.5-5%, v/v), reaction time (1-5h) and incubation temperature (90-120 degrees C). The maximum catalytic efficiency (E) was 10.85 under the conditions of 0.5% of HCl at 100 degrees C for 5h, which the main components (in gl(-1)) in the hydrolysate were glucose, 1.50; xylose, 22.59; arabinose, 1.29; acetic acid, 0.15 and furfural, 1.19. To increase yield of lactic acid production from the hydrolysate by Lactococcus lactis IO-1, the hydrolysate was detoxified through amberlite and supplemented with 7 g l(-1) of xylose and 7 g l(-1) of yeast extract. The main products (in gl(-1)) of the fermentation were lactic acid, 10.85; acetic acid, 7.87; formic acid, 6.04 and ethanol, 5.24.

  13. Effect of acid concentration and treatment time on acid-alcohol modified jackfruit seed starch properties.

    PubMed

    Dutta, Himjyoti; Paul, Sanjib Kumar; Kalita, Dipankar; Mahanta, Charu Lata

    2011-09-15

    The properties of starch extracted from jackfruit (Artocarpus heterophyllus Lam.) seeds, collected from west Assam after acid-alcohol modification by short term treatment (ST) for 15-30min with concentrated hydrochloric acid and long term treatment (LT) for 1-15days with 1M hydrochloric acid, were investigated. Granule density, freeze thaw stability, solubility and light transmittance of the treated starches increased. A maximum decrease in the degree of polymerisation occurred in ST of 30min (2607.6). Jackfruit starch had 27.1±0.04% amylose content (db), which in ST initially decreased and then increased with the severity of treatment; in LT the effect was irregular. The pasting profile and granule morphology of the treated samples were severely modified. Native starch had the A-type crystalline pattern and crystalline structure increased on treatment. FTIR spectra revealed slight changes in bond stretching and bending. Colour measurement indicated that whiteness increased on treatment. Acid modified jackfruit seed starch can have applications in the food industry.

  14. Method for determination of uranium isotopes in environmental samples by liquid-liquid extraction with triisooctylamine/xylene in hydrochloric media and alpha spectrometry.

    PubMed

    Popov, L

    2012-10-01

    Alternative method for determination of uranium isotopes in various environmental samples is presented. The method is based on total decomposition of the solid materials and preconcentration of liquid samples. The separation of uranium from interfering radionuclides and stable matrix elements is attained by liquid-liquid extraction with triisooctylamine/xylene in hydrochloric media. After the additional removal of stable iron by extraction with diisopropyl ether, purified uranium is electrodeposited on stainless steel disks and measured by alpha spectrometry. The analytical method has been successfully applied to the determination of uranium isotopes in water and bottom sediments from the rivers Danube, Ogosta and Tzibritza in Northwestern Bulgaria. The analytical quality was checked by analyzing reference materials with different matrices.

  15. Flower-like nanostructure MNb{sub 2}O{sub 6} (M = Mn, Zn) with high surface area: Hydrothermal synthesis and enhanced photocatalytic performance

    SciTech Connect

    Huang, Xue; Jing, Yan; Yang, Jia; Ju, Jing; Cong, Rihong; Gao, Wenliang; Yang, Tao

    2014-03-01

    Graphical abstract: - Highlights: • MNb{sub 2}O{sub 6} was prepared by a mild two-step hydrothermal method. • Their flower-like nanostructure morphology was studied by SEM and TEM. • High BET surface areas for MnNb{sub 2}O{sub 6} (∼50 m{sup 2}/g) and ZnNb{sub 2}O{sub 6} (∼100 m{sup 2}/g). • Band gap energies were estimated by UV–vis diffuse reflectance spectra. • Photocatalytic activities were evaluated under UV-light irradiation. - Abstract: Nano-scaled MNb{sub 2}O{sub 6} (M = Mn, Zn) was successfully synthesized via a two-step hydrothermal method. It is important to control the exact pH of the reaction solution in order to obtain pure products. The as-prepared samples both crystallize in the columbite structure. Interestingly, the products possess a flower-like morphology in a pseudo-six-fold symmetry, which is in fact arrayed by two-dimensional nanosheets. Their surface areas (51 m{sup 2}/g for MnNb{sub 2}O{sub 6} and 103 m{sup 2}/g for ZnNb{sub 2}O{sub 6}) are about 25–50 times of those prepared by solid state reaction. UV–vis diffuse reflectance spectra show the nano-scaled sample has a stronger absorption and a narrower band gap than its bulk form. The estimated band gap energies are 2.70 eV (MnNb{sub 2}O{sub 6}) and 3.77 eV (ZnNb{sub 2}O{sub 6}), respectively. The nano-scaled ZnNb{sub 2}O{sub 6} exhibits a double enhancement of photocatalytic activity in the decolorization of methylene blue than bulk ZnNb{sub 2}O{sub 6}.

  16. 1,4-Dihydropyridine derivatives without Ca2+-antagonist activity up-regulate Psma6 mRNA expression in kidneys of intact and diabetic rats.

    PubMed

    Ošiņa, Kristīne; Rostoka, Evita; Sokolovska, Jelizaveta; Paramonova, Natalia; Bisenieks, Egils; Duburs, Gunars; Sjakste, Nikolajs; Sjakste, Tatjana

    2016-01-01

    Impaired degradation of proteins by the ubiquitin-proteasome system (UPS) is observed in numerous pathologies including diabetes mellitus (DM) and its complications. Dysregulation of proteasomal degradation might be because of altered expression of genes and proteins involved in the UPS. The search for novel compounds able to normalize expression of the UPS appears to be a topical problem. A novel group of 1,4-dihydropyridine (1,4-DHP) derivatives lacking Ca2+-antagonists activities, but capable to produce antidiabetic, antioxidant and DNA repair enhancing effects, were tested for ability to modify Psma6 mRNA expression levels in rat kidneys and blood in healthy animals and in rats with streptozotocin (STZ) induced DM. Psma6 gene was chosen for the study, as polymorphisms of its human analogue are associated with DM and cardiovascular diseases. 1,4-DHP derivatives (metcarbatone, etcarbatone, glutapyrone, J-9-125 and AV-153-Na) were administered per os for three days (0.05 mg/kg and/or 0.5 mg/kg). Psma6 gene expression levels were evaluated by quantitative PCR. Psma6 expression was higher in kidneys compared to blood. Induction of diabetes caused increase of Psma6 expression in kidneys, although it was not changed in blood. Several 1,4-DHP derivatives increased expression of the gene both in kidneys and blood of control and model animals, but greater impact was observed in kidneys. The observed effect might reflect coupling of antioxidant and proteolysis-promoting activities of the compounds.

  17. Crystal structures and chemistry of double perovskites Ba{sub 2}M(II)M'(VI)O{sub 6} (M=Ca, Sr, M'=Te, W, U)

    SciTech Connect

    Fu, W.T. Au, Y.S.; Akerboom, S.; IJdo, D.J.W.

    2008-09-15

    Structures of the double perovskites Ba{sub 2}M(II)M '(VI)O{sub 6} (M=Ca, Sr, M'=Te, W, U) at room temperature have been investigated by the Rietveld method using X-ray and neutron powder diffraction data. For double perovskites with M=Sr, the observed space groups are I2/m (M' =W) and R3-bar (M'=Te), respectively. In the case of M=Ca, the space groups are either monoclinic P2{sub 1}/n (M'=U) or cubic Fm3-bar m (M'=W and Te). The tetragonal and orthorhombic symmetry reported earlier for Ba{sub 2}SrTeO{sub 6} and Ba{sub 2}CaUO{sub 6}, respectively, were not observed. In addition, non-ambient X-ray diffraction data were collected and analyzed for Ba{sub 2}SrWO{sub 6} and Ba{sub 2}CaWO{sub 6} in the temperature range between 80 and 723 K. It was found that the rhombohedral R3-bar structure exists in Ba{sub 2}SrWO{sub 6} above room temperature between the monoclinic and the cubic structure, whereas the cubic Ba{sub 2}CaWO{sub 6} undergoes a structural phase transition at low temperature to the tetragonal I4/m structure. - Graphical abstract: Evolution of structures as function of temperature in Ba{sub 2}SrWO{sub 6} (left) and Ba{sub 2}CaWO{sub 6} (right). The existence of two phase region in Ba{sub 2}SrWO{sub 6} can be clearly seen by the progressive increase of the rhombohedral R3-bar phase marked by asterisk (*)

  18. An Effective Acid Combination for Enhanced Properties and Corrosion Control of Acidizing Sandstone Formation

    NASA Astrophysics Data System (ADS)

    Umer Shafiq, Mian; Khaled Ben Mahmud, Hisham

    2016-03-01

    To fulfill the demand of the world energy, more technologies to enhance the recovery of oil production are being developed. Sandstone acidizing has been introduced and it acts as one of the important means to increase oil and gas production. Sandstone acidizing operation generally uses acids, which create or enlarge the flow channels of formation around the wellbore. In sandstone matrix acidizing, acids are injected into the formation at a pressure below the formation fracturing pressure, in which the injected acids react with mineral particles that may restrict the flow of hydrocarbons. Most common combination is Hydrofluoric Acid - Hydrochloric with concentration (3% HF - 12% HCl) known as mud acid. But there are some problems associated with the use of mud acid i.e., corrosion, precipitation. In this paper several new combinations of acids were experimentally screened to identify the most effective combination. The combinations used consist of fluoboric, phosphoric, formic and hydrofluoric acids. Cores were allowed to react with these combinations and results are compared with the mud acid. The parameters, which are analyzed, are Improved Permeability Ratio, strength and mineralogy. The analysis showed that the new acid combination has the potential to be used in sandstone acidizing.

  19. Analysis of a mixture of a known and an unknown weak acid by titration to a preset pH.

    PubMed

    Livaska, A

    1975-12-01

    The preset-pH titration method has been used to indicate the presence of a second acid when the titration curve (pH vs. volume of added titrant) seems to indicate only one acid. By use of the method even small amounts of propionic acid can be detected in an acetic acid solution despite the small value of Delta log K(H)(HA) = 0.18. Binary mixtures of acids may bs analysed when one acid is known, and log k(H)(HA) for the unknown acid may be found. Acetic acid, as the known acid, has been determined together with hydrochloric, mandelic, hydroxyacetic or boric acid or ammonium ion, with an error of about 1%. The method can be used in some cases for titration of ternary mixtures of one known and two unknown acids. Only the sum of the unknown acids can then be determined together with the known acid.

  20. Modified yukmijihwangtang suppresses the production of proinflammatory cytokines in the intravesical hydrochloric acid-induced cystitis rat model via the NF-κB pathway.

    PubMed

    Lee, Jeong-Won; Pak, Sok Cheon; Jeon, Songhee; Kim, Dong-Il

    2012-01-01

    Yukmijihwangtang (YM), a boiled extract of medicinal plants, has been prescribed for patients with kidney dysfunction in Korea; however, the mechanism underlying its therapeutic effects has not been fully elucidated. This study was conducted to evaluate the beneficial effects on bladder function by using modified YM (M-YM), which included Ulmi radicis cortex in addition to the six traditional medicinal plants in YM. Bladder irritation of the rats was caused by intravesical instillation of HCl. The animals were divided into six groups: sham group, cystitis-injury group with no treatment, cystitis-injury group with prednisolone treatment (5 mg/kg), and cystitis-injury with M-YM treatment (100, 200 or 500 mg/kg groups). Whole bladders were collected at day eight after injury. Samples were analyzed by histological and immunological examinations. An in vitro study was performed to determine whether M-YM extracts inhibit lipopolysaccharide (LPS)-induced nitric oxide (NO) production and IκB phosphorylation in a human uroepithelial cell line of T24 cells. Administration of M-YM notably improved bladder histological changes, and suppressed IL-6/TNF α production and IκB phosphorylation in a rat model of chronic cystitis. M-YM also inhibited LPS-induced NO production and IκB phosphorylation in T24 cells. This study suggests that administration of M-YM might be an applicable therapeutic traditional medicine for the treatment of interstitial cystitis.

  1. Electrochemical and theoretical investigation of the inhibitory effect of two Schiff bases of benzaldehyde for the corrosion of aluminium in hydrochloric acid

    NASA Astrophysics Data System (ADS)

    Naik, U. J.; Jha, P. C.; Lone, M. Y.; Shah, R. R.; Shah, N. K.

    2016-12-01

    The corrosion inhibition effect of o-Aminophenol-N-Benzylidene (o-AmphNB) and o-Anisidene-N-Benzylidene (o-AnsNB) for pure Aluminium in 1 M HCl at different concentrations of two different inhibitors were investigated by means of weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The values of Δ Gadso revealed that the adsorption mechanism of these molecules on aluminium surface is competitive phenomenon between chemical and physical adsorption. Potentiodynamic polarization parameters revealed the mixed mode of inhibition with predominance of cathodic inhibition. The impedance results showed that with increase in concentration of inhibitor, charge transfer resistance increases while double layer capacitance decreases. Quantum chemical calculations based on density functional theory (DFT) method were performed on o-AmphNB and o-AnsNB to determine the relationship between molecular structures and their inhibition efficiencies. Correlation analysis concluded that the inhibition effect of inhibitors could be explained in terms of electronic properties.

  2. Final report on key comparison CCQM-K73: Amount content of H+ in hydrochloric acid (0.1 mol kg-1)

    NASA Astrophysics Data System (ADS)

    Pratt, Kenneth W.; Ortiz-Aparicio, Jose Luis; Matehuala-Sanchez, Francisco Javier; Pawlina, Monika; Kozlowski, Wladyslaw; Borges, Paulo P.; da Silva Junior, Wiler B.; Borinsky, Mónica B.; Hernandez-Mabel Puelles, Ana; Hatamleh, Nadia; Acosta, Osvaldo; Nunes, João; Guiomar Lito, M. J.; Camões, M. Filomena; Filipe, Eduarda; Hwang, Euijin; Lim, Youngran; Bing, Wu; Qian, Wang; Chao, Wei; Hioki, Akiharu; Asakai, Toshiaki; Máriássy, Michal; Hanková, Zuzana; Nagibin, Sergey; Manska, Olexandra; Gavrilkin, Vladimir

    2013-01-01

    This key comparison (KC), CCQM-K73, was performed to demonstrate the capability of the participating National Metrology Institutes (NMIs) to measure the amount content of H+, νH+, in an HCl solution with a nominal νH+ of 0.1 mol kg-1. The comparison was a joint activity of the Electrochemical Working Group (EAWG) and Inorganic Analysis Working Group (IAWG) of the CCQM and was coordinated by NIST (USA) and CENAM (Mexico). The agreement of the results was not commensurate with the claimed uncertainties of the subset of participants that claimed small uncertainties for this determination. A workshop on technical issues relating to the CCQM-K73 measurements was conducted at the joint IAWG-EAWG meeting at the Bureau International des Poids et Mesures (BIPM), Paris (Sèvres) in April 2010. Several possible sources of bias were investigated, but none could explain the observed dispersion among the participants' results. In the absence of a specific cause for the dispersion, the IAWG and EAWG decided to assign a Key Comparison Reference Value, KCRV, and standard uncertainty of the KCRV, uKCRV, based on the DerSimonian-Laird statistical estimator. The uKCRV is dominated by the between-laboratory scatter of results in CCQM-K73. The uncertainty estimates from the participants with the lowest reported uncertainties remain unsupported by this KC. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  3. Quantification of hydrochloric acid and particulate deposition resulting from Space Shuttle launches at John F. Kennedy Space Center, Florida, U.S.A.

    NASA Technical Reports Server (NTRS)

    Dreschel, Thomas W.; Hall, Carlton R.

    1990-01-01

    Results are presented from studies designed to identify deposition patterns and quantify the ecosystem loading rates of exhaust constituents (which are primarily Al2O3 and HCl) from the Space Shuttle solid rocket motors in the area of the Kennedy Space Center launch pad. Results of measurements indicate that, under certain meteorological conditions, as much as 7.1 x 10 exp 3 kg of particulates and 3.4 x 10 exp 3 kg HCL can be deposited to the near-field environment beyond the launch pad perimeter fence during one STS launch.

  4. Products of the Black Sea alga Phyllophora nervosa as corrosion inhibitor for steel in acids

    SciTech Connect

    Popelyukh, G.M.; Andrianov, A.M.; Burtnenko, L.M.; Gazha, P.A.; Talavira, L.I.

    1986-05-01

    The authors have investigated the inhibiting properties of the processing products of the Black Sea red seaweed Phyllophora nervosa on specimens of steel St3 in phosphoric and hydrochloric acids of various concentrations at temperatures in the range from 30 to 95 /sup 0/C. They have studied how the concentrations of urotropin, sodium chloride, and Fe/sup 3 +/ ions influence the protective properties of the seaweed inhibitor. They have made preliminary investigations of the mechanisms of the protective action.

  5. Simultaneous hydrolysis-esterification of wet microalgal lipid using acid.

    PubMed

    Takisawa, Kenji; Kanemoto, Kazuyo; Kartikawati, Muliasari; Kitamura, Yutaka

    2013-12-01

    This research demonstrated hydrolysis of wet microalgal lipid and esterification of free fatty acid (FFA) using acid in one-step process. The investigation of simultaneous hydrolysis-esterification (SHE) of wet microalgal lipid was conducted by using L27 orthogonal design and the effects of water content, volume of sulphuric acid, volume of methanol, temperature and time on SHE were examined. As a result, water content was found to be the most effective factor. The effects of various parameters on fatty acid methyl ester (FAME) content and equilibrium relation between FAME and FFA were also examined under water content 80%. Equimolar amounts of sulphuric acid and hydrochloric acid showed similar results. This method has great potential in terms of biodiesel production from microalgae since no organic solvents are used.

  6. [Rapid determination of eight organic acids in plant tissue by sequential extraction and high performance liquid chromatography].

    PubMed

    Huang, Tianzhi; Wang, Shijie; Liu Xiuming; Liu, Hong; Wu, Yanyou; Luo Xuqiang

    2014-12-01

    A sequential extraction method was developed to determine different forms of oxalate and seven oxalate-metabolism-related organic acids (glyoxylic acid, tartaric acid, glycolic acid, malic acid, acetic acid, citric acid, succinic acid) in plant tissue. The ultra-pure water was used as the extraction medium to obtain water-soluble oxalic acid and the other seven water-soluble organic acids. After the extraction of the water-soluble organic acids, the residues were extracted by dilute hydrochloric acid successively to get the acid-soluble oxalate which entered the liquid phase. A Hypersil ODS column was used with 5 mmol/L potassium dihydrogen phosphate buffer solution (pH 2. 8) as the mobile phase. The diode array detector was set at 210 nm and the column temperature at 30 °C with the injection volume of 5 µL. The flow rate was controlled at different times which allowed a good and rapid separation of the organic acids and hydrochloric acid. Under these conditions, the linear ranges of the method were 1-2000 mg/L for oxalic acid, 25-2,000 mg/L for acetic acid, and 10-2,000 mg/L for glyoxylic acid, tartaric acid, glycolic acid, malic acid, citric acid and succinic acid, with the correlation coefficients of the eight organic acids ≥ 0. 9996. The average recoveries of the eight organic acids in leaves and roots were 93. 5%-104. 4% and 85. 3%-105. 4% with RSDs of 0. 15% -2.43% and 0. 31%-2. 9% (n=7), respectively. The limits of detection ranged from 1 to 10 ng (S/N=3). The results indicated that the method is accurate, rapid and reproducible for the determination of organic acids in plant samples.

  7. Investigation of Gas-Sensing Property of Acid-Deposited Polyaniline Thin-Film Sensors for Detecting H₂S and SO₂.

    PubMed

    Dong, Xingchen; Zhang, Xiaoxing; Wu, Xiaoqing; Cui, Hao; Chen, Dachang

    2016-11-10

    Latent insulation defects introduced in manufacturing process of gas-insulated switchgears can lead to partial discharge during long-time operation, even to insulation fault if partial discharge develops further. Monitoring of decomposed components of SF₆, insulating medium of gas-insulated switchgear, is a feasible method of early-warning to avoid the occurrence of sudden fault. Polyaniline thin-film with protonic acid deposited possesses wide application prospects in the gas-sensing field. Polyaniline thin-film sensors with only sulfosalicylic acid deposited and with both hydrochloric acid and sulfosalicylic acid deposited were prepared by chemical oxidative polymerization method. Gas-sensing experiment was carried out to test properties of new sensors when exposed to H₂S and SO₂, two decomposed products of SF₆ under discharge. The gas-sensing properties of these two sensors were compared with that of a hydrochloric acid deposited sensor. Results show that the hydrochloric acid and sulfosalicylic acid deposited polyaniline thin-film sensor shows the most outstanding sensitivity and selectivity to H₂S and SO₂ when concentration of gases range from 10 to 100 μL/L, with sensitivity changing linearly with concentration of gases. The sensor also possesses excellent long-time and thermal stability. This research lays the foundation for preparing practical gas-sensing devices to detect H₂S and SO₂ in gas-insulated switchgears at room temperature.

  8. Investigation of Gas-Sensing Property of Acid-Deposited Polyaniline Thin-Film Sensors for Detecting H2S and SO2

    PubMed Central

    Dong, Xingchen; Zhang, Xiaoxing; Wu, Xiaoqing; Cui, Hao; Chen, Dachang

    2016-01-01

    Latent insulation defects introduced in manufacturing process of gas-insulated switchgears can lead to partial discharge during long-time operation, even to insulation fault if partial discharge develops further. Monitoring of decomposed components of SF6, insulating medium of gas-insulated switchgear, is a feasible method of early-warning to avoid the occurrence of sudden fault. Polyaniline thin-film with protonic acid deposited possesses wide application prospects in the gas-sensing field. Polyaniline thin-film sensors with only sulfosalicylic acid deposited and with both hydrochloric acid and sulfosalicylic acid deposited were prepared by chemical oxidative polymerization method. Gas-sensing experiment was carried out to test properties of new sensors when exposed to H2S and SO2, two decomposed products of SF6 under discharge. The gas-sensing properties of these two sensors were compared with that of a hydrochloric acid deposited sensor. Results show that the hydrochloric acid and sulfosalicylic acid deposited polyaniline thin-film sensor shows the most outstanding sensitivity and selectivity to H2S and SO2 when concentration of gases range from 10 to 100 μL/L, with sensitivity changing linearly with concentration of gases. The sensor also possesses excellent long-time and thermal stability. This research lays the foundation for preparing practical gas-sensing devices to detect H2S and SO2 in gas-insulated switchgears at room temperature. PMID:27834895

  9. Induction of an oxalate decarboxylase in the filamentous fungus Trametes versicolor by addition of inorganic acids.

    PubMed

    Zhu, Cui Xia; Hong, Feng

    2010-01-01

    In order to improve yields and to reduce the cost of oxalate decarboxylase (OxDC, EC 4.1.1.2), the induction of OxDC in the white-rot fungus Trametes versicolor was studied in this work. OxDC was induced by addition of inorganic acids including hydrochloric acid, sulfuric acid, and phosphoric acid to culture media. The results showed that all the acids could enhance OxDC expression. The activity of the acid-induced OxDC rose continuously. All of the OxDC volumetric activities induced by the inorganic acids were higher than 20.0 U/L and were two times higher than that obtained with oxalic acid. OxDC productivity was around 4.0 U*L(-1)*day(-1). The highest specific activity against total protein was 3.2 U/mg protein at day 8 after induction of sulfuric acid, and the specific activity against mycelial dry weight was 10.6 U/g at day 9 after induction of hydrochloric acid. The growth of mycelia was inhibited slightly when the pH values in culture media was around 2.5-3.0, while the growth was inhibited heavily when the pH was lower than 2.5.

  10. Transcriptomic analysis of Escherichia coli O157:H7 and K-12 cultures exposed to inorganic and organic acids in stationary phase reveals acidulant- and strain-specific acid tolerance responses.

    PubMed

    King, Thea; Lucchini, Sacha; Hinton, Jay C D; Gobius, Kari

    2010-10-01

    The food-borne pathogen Escherichia coli O157:H7 is commonly exposed to organic acid in processed and preserved foods, allowing adaptation and the development of tolerance to pH levels otherwise lethal. Since little is known about the molecular basis of adaptation of E. coli to organic acids, we studied K-12 MG1655 and O157:H7 Sakai during exposure to acetic, lactic, and hydrochloric acid at pH 5.5. This is the first analysis of the pH-dependent transcriptomic response of stationary-phase E. coli. Thirty-four genes and three intergenic regions were upregulated by both strains during exposure to all acids. This universal acid response included genes involved in oxidative, envelope, and cold stress resistance and iron and manganese uptake, as well as 10 genes of unknown function. Acidulant- and strain-specific responses were also revealed. The acidulant-specific response reflects differences in the modes of microbial inactivation, even between weak organic acids. The two strains exhibited similar responses to lactic and hydrochloric acid, while the response to acetic acid was distinct. Acidulant-dependent differences between the strains involved induction of genes involved in the heat shock response, osmoregulation, inorganic ion and nucleotide transport and metabolism, translation, and energy production. E. coli O157:H7-specific acid-inducible genes were identified, suggesting that the enterohemorrhagic E. coli strain possesses additional molecular mechanisms contributing to acid resistance that are absent in K-12. While E. coli K-12 was most resistant to lactic and hydrochloric acid, O157:H7 may have a greater ability to survive in more complex acidic environments, such as those encountered in the host and during food processing.

  11. Gastric acid secretion and mucosal appearances in Addison's disease and hypopituitarism.

    PubMed

    Smith, A W; Delamore, I W; Williams, A W

    1961-06-01

    Studies of gastric acid secretion and mucosal appearances have been made in a group of 14 patients suffering from hypopituitarism. Achlorhydria was found in six of the patients suffering from Addison's disease but in only one patient suffering from hypopituitarism. In both groups the mean gastric secretion of hydrochloric acid was considerably lower than in a group of control subjects and replacement therapy with cortisone and DOCA in Addison's disease and cortisone and thyroid extract in hypopituitarism failed to restore gastric function to normal. A constant correlation was not found between gastric acid secretion and mucosal appearances.

  12. Comparison of acids on the induction of an Acid Tolerance Response in Salmonellatyphimurium, consequences for food safety.

    PubMed

    Alvarez-Ordóñez, Avelino; Fernández, Ana; Bernardo, Ana; López, Mercedes

    2009-01-01

    Salmonellatyphimurium inactivation at pH 3.0 in Brain Heart Infusion (BHI) and Meat Extract (ME) was studied using stationary-phase cells grown in non-acidified BHI (pH 7.4) and ME (pH 6.6) and acidified BHI and ME at pH values of 6.4, 5.4 and 4.5 with acetic, ascorbic, citric, lactic, malic and hydrochloric acids. Cells grown in buffered BHI (pH 7.0) were used as non-acid adapted control cells. Acid adapted S. typhimurium cells obtained in both media (BHI and ME) were more resistant to extremely acidic conditions when ME was used as challenge medium, although the ability of S. typhimurium to survive extreme pH conditions also depended on growth medium and type of acidulant used. Acid adapted cells grown in BHI developed a higher Acid Tolerance Response (ATR) than those grown in ME. When cells were grown in acidified BHI, no bacterial inactivation was observed after three hours of acid challenge in ME. Furthermore, when cells were grown in acidified ME at pH values of 6.4 and 5.4, D-values obtained using ME as challenge medium were, respectively, 6-9 and 10-15 fold higher than those found when BHI was used as challenge medium. In all cases, the order of acids in inducing the ATR was citric>acetic>lactic>malic⩾hydrochloric>ascorbic. These findings represent a concern for food safety as the increase in the acid resistance of acid adapted cells could allow for S. typhimurium survival in the strong acidic environment of the gastrointestinal tract.

  13. Determination of the non protein amino acid β-N-methylamino-l-alanine in estuarine cyanobacteria by capillary electrophoresis.

    PubMed

    Baptista, Mafalda S; Cianca, Rosa C C; Lopes, Viviana R; Almeida, C Marisa R; Vasconcelos, Vitor M

    2011-10-01

    A capillary electrophoretic method for the determination of the amino acid β-N-methylamino-l-alanine (BMAA) was achieved using a fused-silica capillary column (50 cm × 75 μm I.D.) filled with 5 mM sodium tetraborate solution (pH 9), with an applied voltage of 25 kV, at 25 °C. The method was then applied in quantifying BMAA in eighteen strains of lyophilized estuarine cyanobacteria, following amino acid extraction using 0.1 M trichloroacetic acid and 6 M hydrochloric acid, sequentially.

  14. 40 CFR 420.95 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to each fume scrubber associated with sulfuric acid pickling operations. (b) Hydrochloric acid... each fume scrubber associated with hydrochloric acid pickling operations. (5) Acid regeneration... scrubber wastewater associated with hydrochloric acid regeneration plants. (c) Combination acid...

  15. 40 CFR 420.95 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to each fume scrubber associated with sulfuric acid pickling operations. (b) Hydrochloric acid... each fume scrubber associated with hydrochloric acid pickling operations. (5) Acid regeneration... scrubber wastewater associated with hydrochloric acid regeneration plants. (c) Combination acid...

  16. 40 CFR 420.95 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to each fume scrubber associated with sulfuric acid pickling operations. (b) Hydrochloric acid... each fume scrubber associated with hydrochloric acid pickling operations. (5) Acid regeneration... scrubber wastewater associated with hydrochloric acid regeneration plants. (c) Combination acid...

  17. 40 CFR 420.95 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to each fume scrubber associated with sulfuric acid pickling operations. (b) Hydrochloric acid... each fume scrubber associated with hydrochloric acid pickling operations. (5) Acid regeneration... scrubber wastewater associated with hydrochloric acid regeneration plants. (c) Combination acid...

  18. 40 CFR 420.95 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to each fume scrubber associated with sulfuric acid pickling operations. (b) Hydrochloric acid... each fume scrubber associated with hydrochloric acid pickling operations. (5) Acid regeneration... scrubber wastewater associated with hydrochloric acid regeneration plants. (c) Combination acid...

  19. Preparation of Highly Crystalline TiO(2) Nanostructures by Acid-assisted Hydrothermal Treatment of Hexagonal-structured Nanocrystalline Titania/Cetyltrimethyammonium Bromide Nanoskeleton.

    PubMed

    Dai, Shuxi; Wu, Yanqiang; Sakai, Toshio; Du, Zuliang; Sakai, Hideki; Abe, Masahiko

    2010-08-11

    Highly crystalline TiO(2) nanostructures were prepared through a facile inorganic acid-assisted hydrothermal treatment of hexagonal-structured assemblies of nanocrystalline titiania templated by cetyltrimethylammonium bromide (Hex-ncTiO(2)/CTAB Nanoskeleton) as starting materials. All samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The influence of hydrochloric acid concentration on the morphology, crystalline and the formation of the nanostructures were investigated. We found that the morphology and crystalline phase strongly depended on the hydrochloric acid concentrations. More importantly, crystalline phase was closely related to the morphology of TiO(2) nanostructure. Nanoparticles were polycrystalline anatase phase, and aligned nanorods were single crystalline rutile phase. Possible formation mechanisms of TiO(2) nanostructures with various crystalline phases and morphologies were proposed.

  20. Preparation of Highly Crystalline TiO2 Nanostructures by Acid-assisted Hydrothermal Treatment of Hexagonal-structured Nanocrystalline Titania/Cetyltrimethyammonium Bromide Nanoskeleton

    PubMed Central

    2010-01-01

    Highly crystalline TiO2 nanostructures were prepared through a facile inorganic acid-assisted hydrothermal treatment of hexagonal-structured assemblies of nanocrystalline titiania templated by cetyltrimethylammonium bromide (Hex-ncTiO2/CTAB Nanoskeleton) as starting materials. All samples were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The influence of hydrochloric acid concentration on the morphology, crystalline and the formation of the nanostructures were investigated. We found that the morphology and crystalline phase strongly depended on the hydrochloric acid concentrations. More importantly, crystalline phase was closely related to the morphology of TiO2 nanostructure. Nanoparticles were polycrystalline anatase phase, and aligned nanorods were single crystalline rutile phase. Possible formation mechanisms of TiO2 nanostructures with various crystalline phases and morphologies were proposed. PMID:21124640

  1. Enhancement by Nalidixic Acid of the Thermal Susceptibility of the Ts-7 Mutant of Escherichia Coli TAU-Bar

    PubMed Central

    Nishida, Mikio; Mishima, Yukio; Kawada, Jun; Yielding, K. Lemone

    1975-01-01

    Nadilidixic acid at 5 × 10−6 M produced a substantial increase in thermal susceptibility of Ts-7, suggesting either that the thermal and nalidixic acid targets are identical or closely interdependent. PMID:1101825

  2. Laboratory studies on acid-oil microemulsion for use in acidizing

    SciTech Connect

    Zhou Yasong; Chen Yuezhu; Sun Yuehua

    1996-12-31

    Two serious of anionic-nonionic surfactants, alkylphenol polyoxyethylene ether phosphates (OPP-n) and sodium salts of carboxymethyl alkylphenol polyoxyethylene ether (OPC-n), where n denotes the average EO number in the molecular, are synthesized to prepare the acid/oil Microemulsions for acidizing. Through components screening tests a work formulation of acidizing microemulsion is established: 13.0% OPP-10, 3.0% OPC-25, 30% n-Hexanol, 36.7% Kerosine and 18.3%(15.0%-concentrated) Hydrochloric Acid. This microemulsion reacts with marble at 30{degrees}C and atmospheric pressure with the lowest acid consuming rate as compared with other retarded acid fluids. Calcium ion accelerates the acid/marble reaction and the suggested microemulsion can tolerate up to 0.69%(W) Calcium ion. No aqueous phase would be separated from the microemulsion until all acid exhausted. The acid/oil microemulsions can be recommended for both matrix and fracture acidizing in depth. The transmission of hydrogen ion in the microemulsion is investigated by using a liquid film supported by solid (SLMS) technique. The mechanism {open_quotes}transmission by exchanging{close_quotes} is suggested. 2 refs., 6 figs., 1 tab.

  3. A Brief Investigation of the Hydrodynamic Characteristics of a 1/13.33-Scale Powered Dynamic Model of a Preliminary Design of the Martin XP6M-1 Flying Boat, TED No. NACA DE-385

    NASA Technical Reports Server (NTRS)

    Blanchard, Ulysse J.

    1953-01-01

    The hydrodynamic characteristics of a preliminary design of the Martin XP6M-1 flying boat have been determined. Longitudinal stability during take-off and landing, resistance of the complete model, and behavior during taxiing and landing in rough water are presented.

  4. Microscopic residues of bone from dissolving human remains in acids.

    PubMed

    Vermeij, Erwin; Zoon, Peter; van Wijk, Mayonne; Gerretsen, Reza

    2015-05-01

    Dissolving bodies is a current method of disposing of human remains and has been practiced throughout the years. During the last decade in the Netherlands, two cases have emerged in which human remains were treated with acid. In the first case, the remains of a cremated body were treated with hydrofluoric acid. In the second case, two complete bodies were dissolved in a mixture of hydrochloric and sulfuric acid. In both cases, a great variety of evidence was collected at the scene of crime, part of which was embedded in resin, polished, and investigated using SEM/EDX. Apart from macroscopic findings like residual bone and artificial teeth, in both cases, distinct microscopic residues of bone were found as follows: (partly) digested bone, thin-walled structures, and recrystallized calcium phosphate. Although some may believe it is possible to dissolve a body in acid completely, at least some of these microscopic residues will always be found.

  5. Photo-crosslinked hyaluronic acid coated upconverting nanoparticles

    NASA Astrophysics Data System (ADS)

    Mrazek, Jiri; Kettou, Sofiane; Matuska, Vit; Svozil, Vit; Huerta-Angeles, Gloria; Pospisilova, Martina; Nesporova, Kristina; Velebny, Vladimir

    2017-02-01

    Hyaluronic acid (HA)-coated inorganic nanoparticles display enhanced interaction with the CD44 receptors which are overexpressed in many types of cancer cells. Here, we describe a modification of core-shell β-NaY0.80Yb0.18Er0.02F4@NaYF4 nanoparticles (UCNP) by HA derivative bearing photo-reactive groups. UCNP capped with oleic acid were firstly transferred to aqueous phase by an improved protocol using hydrochloric acid or lactic acid treatment. Subsequently, HA bearing furanacryloyl moieties (HA-FU) was adsorbed on the nanoparticle surface and crosslinked by UV irradiation. The crosslinking resulted in stable HA coating, and no polymer desorption was observed. As-prepared UCNP@HA-FU show a hydrodynamic diameter of about 180 nm and are colloidally stable in water and cell culture media. The cellular uptake by normal human fibroblasts and MDA MB-231 cancer cell line was investigated by upconversion luminescence imaging.

  6. Listeria monocytogenes varies among strains to maintain intracellular pH homeostasis under stresses by different acids as analyzed by a high-throughput microplate-based fluorometry.

    PubMed

    Cheng, Changyong; Yang, Yongchun; Dong, Zhimei; Wang, Xiaowen; Fang, Chun; Yang, Menghua; Sun, Jing; Xiao, Liya; Fang, Weihuan; Song, Houhui

    2015-01-01

    Listeria monocytogenes, a food-borne pathogen, has the capacity to maintain intracellular pH (pHi) homeostasis in acidic environments, but the underlying mechanisms remain elusive. Here, we report a simple microplate-based fluorescent method to determine pHi of listerial cells that were prelabeled with the fluorescent dye carboxyfluorescein diacetate N-succinimidyl ester and subjected to acid stress. We found that L. monocytogenes responds differently among strains toward organic and inorganic acids to maintain pHi homeostasis. The capacity of L. monocytogenes to maintain pHi at extracellular pH 4.5 (pHex) was compromised in the presence of acetic acid and lactic acid, but not by hydrochloric acid and citric acid. Organic acids exhibited more inhibitory effects than hydrochloric acid at certain pH conditions. Furthermore, the virulent stains L. monocytogenes EGDe, 850658 and 10403S was more resistant to acidic stress than the avirulent M7 which showed a defect in maintaining pHi homeostasis. Deletion of sigB, a stress-responsive alternative sigma factor from 10403S, markedly altered intracellular pHi homeostasis, and showed a significant growth and survival defect under acidic conditions. Thus, this work provides new insights into bacterial survival mechanism to acidic stresses.

  7. Listeria monocytogenes varies among strains to maintain intracellular pH homeostasis under stresses by different acids as analyzed by a high-throughput microplate-based fluorometry

    PubMed Central

    Cheng, Changyong; Yang, Yongchun; Dong, Zhimei; Wang, Xiaowen; Fang, Chun; Yang, Menghua; Sun, Jing; Xiao, Liya; Fang, Weihuan; Song, Houhui

    2015-01-01

    Listeria monocytogenes, a food-borne pathogen, has the capacity to maintain intracellular pH (pHi) homeostasis in acidic environments, but the underlying mechanisms remain elusive. Here, we report a simple microplate-based fluorescent method to determine pHi of listerial cells that were prelabeled with the fluorescent dye carboxyfluorescein diacetate N-succinimidyl ester and subjected to acid stress. We found that L. monocytogenes responds differently among strains toward organic and inorganic acids to maintain pHi homeostasis. The capacity of L. monocytogenes to maintain pHi at extracellular pH 4.5 (pHex) was compromised in the presence of acetic acid and lactic acid, but not by hydrochloric acid and citric acid. Organic acids exhibited more inhibitory effects than hydrochloric acid at certain pH conditions. Furthermore, the virulent stains L. monocytogenes EGDe, 850658 and 10403S was more resistant to acidic stress than the avirulent M7 which showed a defect in maintaining pHi homeostasis. Deletion of sigB, a stress-responsive alternative sigma factor from 10403S, markedly altered intracellular pHi homeostasis, and showed a significant growth and survival defect under acidic conditions. Thus, this work provides new insights into bacterial survival mechanism to acidic stresses. PMID:25667585

  8. Field and Laboratory Studies of Reactions between Atmospheric Water Soluble Organic Acids and Inorganic Particles

    SciTech Connect

    Wang, Bingbing; Kelly, Stephen T.; Sellon, Rachel E.; Shilling, John E.; Tivanski, Alexei V.; Moffet, Ryan C.; Gilles, Mary K.; Laskin, Alexander

    2013-06-25

    Atmospheric inorganic particles undergo complex heterogeneous reactions that change their physicochemical properties. Depletion of chloride in sea salt particles was reported in previous field studies and was attributed to the acid displacement of chlorides with inorganic acids, such as nitric and sulfuric acids [1-2]. Recently, we showed that NaCl can react with water soluble organic acids (WSOA) and release gaseous hydrochloric acid (HCl) resulting in formation of organic salts [3]. A similar mechanism is also applicable to mixed WSOA/nitrate particles where multi-phase reactions are driven by the volatility of nitric acid. Furthermore, secondary organic material, which is a complex mixture of carboxylic acids, exhibits the same reactivity towards chlorides and nitrates. Here, we present a systematic study of reactions between atmospheric relevant WSOA, SOM, and inorganic salts including NaCl, NaNO3, and Ca(NO3)2 using complementary micro-spectroscopy analysis.

  9. Evaluation of DNA typing as a positive identification method for soft and hard tissues immersed in strong acids.

    PubMed

    Robino, C; Pazzi, M; Di Vella, G; Martinelli, D; Mazzola, L; Ricci, U; Testi, R; Vincenti, M

    2015-11-01

    Identification of human remains can be hindered by several factors (e.g., traumatic mutilation, carbonization or decomposition). Moreover, in some criminal cases, offenders may purposely adopt various expedients to thwart the victim's identification, including the dissolution of body tissues by the use of corrosive reagents, as repeatedly reported in the past for Mafia-related murders. By means of an animal model, namely porcine samples, we evaluated standard DNA typing as a method for identifying soft (muscle) and hard (bone and teeth) tissues immersed in strong acids (hydrochloric, nitric and sulfuric acid) or in mixtures of acids (aqua regia). Samples were tested at different time intervals, ranging between 2 and 6h (soft tissues) and 2-28 days (hard tissues). It was shown that, in every type of acid, complete degradation of the DNA extracted from soft tissues preceded tissue dissolution and could be observed within 4h of immersion. Conversely, high molecular weight DNA amenable to STR analysis could be isolated from hard tissues as long as cortical bone fragments were still present (28 days for sulfuric acid, 7 days for nitric acid, 2 days for hydrochloric acid and aqua regia), or the integrity of the dental pulp chamber was preserved (7 days, in sulfuric acid only). The results indicate that DNA profiling of acid-treated body parts (in particular, cortical bone) is still feasible at advanced stages of corrosion, even when the morphological methods used in forensic anthropology and odontology can no longer be applied for identification purposes.

  10. Acid adaptation promotes survival of Salmonella spp. in cheese.

    PubMed Central

    Leyer, G J; Johnson, E A

    1992-01-01

    Salmonella typhimurium was adapted to acid by exposure to hydrochloric acid at pH 5.8 for one to two doublings. Acid-adapted cells had increased resistance to inactivation by organic acids commonly present in cheese, including lactic, propionic, and acetic acids. Recovery of cells during the treatment with organic acids was increased 1,000-fold by inclusion of 0.1% sodium pyruvate in the recovery medium. Acid-adapted S. typhimurium cells survived better than nonadapted cells during a milk fermentation by a lactic acid culture. Acid-adapted cells also showed enhanced survival over a period of two months in cheddar, Swiss, and mozzarella cheeses kept at 5 degrees C. Acid adaptation was found in Salmonella spp., including Salmonella enteritidis, Salmonella choleraesuis subsp. choleraesuis serotype heidelberg, and Salmonella choleraesuis subsp. choleraesuis serotype javiana, associated with food poisoning. These observations support the theory that acid adaptation is an important survival mechanism enabling Salmonella spp. to persist in fermented dairy products and possibly other acidic food products. PMID:1622286

  11. Response of citrus and other selected plant species to simulated HCL - acid rain

    NASA Technical Reports Server (NTRS)

    Knott, W. M.; Heagle, A. S.

    1980-01-01

    Mature valencia orange trees were sprayed with hydrochloric acid solutions (pH 7.8, 2.0, 1.0, and 0.5) in the field at the full bloom stage and at one month after fruit set. Potted valencia orange and dwarf citrus trees, four species of plants native to Merritt Island, and four agronomic species were exposed to various pH levels of simulated acid rain under controlled conditions. The acid rain was generated from dilutions of hydrochloric acid solutions or by passing water through an exhaust generated by burning solid rocket fuel. The plants were injured severely at pH levels below 1.0, but showed only slight injury at pH levels of 2.0 and above. Threshold injury levels were between 2.0 and 3.0 pH. The sensitivity of the different plant species to acid solutions was similar. Foliar injury symptoms were representative of acid rain including necrosis of young tissue, isolated necrotic spots or patches, and leaf abscission. Mature valencia orange trees sprayed with concentrations of 1.0 pH and 0.5 pH in the field had reduced fruit yields for two harvests after the treatment. All experimental trees were back to full productivity by the third harvest after treatment.

  12. Sulphur in char and char desulphurization by acid leaching and hydropyrolysis

    USGS Publications Warehouse

    Chou, I.-Ming; Loffredo, D.M.

    1985-01-01

    Sulphur compounds volatilized during pyrolysis of acid-leached char were measured to determine characteristics of char desulphurization reactions. Pyrolysis of char in a hydrogen atmosphere (hydropyrolysis) produced a much higher concentration of thiophenic organics compared with that produced during pyrolysis in a nitrogen atmosphere. Hydrogen sulphide gas evolution, at progressively increasing pyrolysis temperature in a helium atmosphere, was measured on five char samples: untreated char, hydrochloric acid-leached char, and three model chars: a demineralized char and two demineralized chars incorporated with sulphur via reactions with elemental sulphur. Hydrogen sulphide gas evolution in untreated char and acid-leached char was found to peak in three temperature regions; the maxima are thought to relate to sulphur in different bonding environments. The amounts of hydrogen sulphide volatilized were much higher for acid-leached char than for untreated char. The gas evolved from each of the remaining three samples showed a single peak region corresponding closely to one of the three peak regions observed for the first two chars. The results of this study indicate that elemental sulphur was produced during hydrochloric acid leaching of the untreated char and suggested that the improved rate of desulphurization observed in the char that had been acid-leached before hydropyrolysis was due in part to the conversion of strongly bound mineral sulphur forms to more weakly bound sulphur forms that are predominantly elemental sulphur in character, and are more easily removed by hydrogen. ?? 1985.

  13. Condensation of anhydrides or dicarboxylic acids with compounds containing active methylene groups. Part 1: Condensation of phthalic anhydride with acetoacetic and malonic ester

    NASA Technical Reports Server (NTRS)

    Oshkaya, V. P.; Vanag, G. Y.

    1985-01-01

    Phthalic anhydride was condensed with acetoacetic ester in acetic anhydride and triethylamine solution, and when phthalyl chloride was reacted with sodium acetoacetic ester compounds were formed of the phthalide and indandione series: phthalylacetoacetic ester and a derivative of indan-1,3-dione which after boiling with hydrochloric acid yielded indan-1,3-dione. Phthalylmalonic ester was obtained from phthalic anhydride and malonic ester in the presence of triethylamine.

  14. Determination of the mode of occurrence of As, Cr, and Hg in three Chinese coal samples by sequential acid leaching

    SciTech Connect

    Wang, B.; Li, W.; Wang, G.; Chen, H.; Li, B.

    2007-07-01

    Sequential acid leaching was used to leach minerals and the trace elements they contain. One-step leaching uses concentrated nitric acid as solvent, while three-step leaching uses 5M hydrochloric acid, concentrated hydrofluoric acid, and concentrated hydrochloric acid as solvents. The sequential acid leaching by three-and one-step leach was also examined. The results showed that one-step leaching could leach over 80% of arsenic from coal samples, and also could leach mercury to a certain degree. During one-step leaching, little chromium is removed, but it is available to leach by three-step leaching; and during the sequential acid leaching by three and one-step leaching, almost 98% ash is leached. The result of acid leaching could also give detailed information on mode of occurrence of As, Cr, and Hg, which could be classified into: silicate association, pyrite association, organic association, and carbonates and sulfates association. Over half of chromium in the three coals is associated with organic matters and the rest is associated with silicates. The mode of occurrence of arsenic and mercury is mainly associated with different mineral matters depending on the coal samples studied.

  15. Crude oil polycyclic aromatic hydrocarbons removal via clay-microbe-oil interactions: Effect of acid activated clay minerals.

    PubMed

    Ugochukwu, Uzochukwu C; Fialips, Claire I

    2017-03-09

    Acid treatment of clay minerals is known to modify their properties such as increase their surface area and surface acidity, making them suitable as catalysts in many chemical processes. However, the role of these surface properties during biodegradation processes of polycyclic aromatic hydrocarbons (PAHs) is only known for mild acid (0.5 M Hydrochloric acid) treated clays. Four different clay minerals were used for this study: a montmorillonite, a saponite, a palygorskite and a kaolinite. They were treated with 3 M hydrochloric acid to produce acid activated clay minerals. The role of the acid activated montmorillonite, saponite, palygorskite and kaolinite in comparison with the unmodified clay minerals in the removal of PAHs during biodegradation was investigated in microcosm experiments. The microcosm experiments contained micro-organisms, oil, and clays in aqueous medium with a hydrocarbon degrading microorganism community predominantly composed of Alcanivorax spp. Obtained results indicated that acid activated clays and unmodified kaolinite did not enhance the biodegradation of the PAHs whereas unmodified montmorillonite, palygorskite and saponite enhanced their biodegradation. In addition, unmodified palygorskite adsorbed the PAHs significantly due to its unique channel structure.

  16. Protonation of diethylaminoethyl methacrylate by acids in various solvents

    SciTech Connect

    Zhuravleva, I.L.; Bune, E.V.; Bogachev, Yu.S.; Sheinker, A.P.; Teleshov, E.N.

    1988-04-10

    It was established by /sup 1/H and /sup 13/C NMR that diethylaminoethyl methacrylate exists in the unprotonated form in solvents which are not acids. In the presence of an equimolar amount of hydrochloric or trifluoroacetic acids the amino ester is fully protonated, irrespective of the solvent. The diethylaminoethyl methacrylate-acetic acid system exists in the form of a molecular complex with a hydrogen bond and in the protonated form; the proportions of the protonated form were estimated in various solvents. The change in the reactivity of diethylaminoethyl methacrylate and its salts in polymerization was explained by a change in the electronic state of CH/sub 2/ = group of the monomer as a result of its protonation and of the formation of a hydrogen bond between the C = O group of the monomer and the solvent.

  17. ANION EXCHANGE METHOD FOR SEPARATION OF METAL VALUES

    DOEpatents

    Hyde, E.K.; Raby, B.A.

    1959-02-10

    A method is described for selectively separating radium, bismuth, poloniums and lead values from a metallic mixture of thc same. The mixture is dissolved in aqueous hydrochloric acid and the acidity is adjusted to between 1 to 2M in hydrochloric acid to form the anionic polychloro complexes of polonium and bismuth. The solution is contacted with a first anion exchange resin such as strong base quaternary ammonia type to selectively absorb the polonium and bismuth leaving the radium and lead in the effluent. The effluent, after treatment in hydrochloric acid to increase the hydrochloric acid concentration to 6M is contacted with a second anion exchange iesin of the same type as the above to selectively adsorb the lead leaving the radium in the effluent. Radium is separately recovered from the effluent from the second exchange column. Lead is stripped from the loaded resin of the second column by treatment with 3M hydrochloric acid solution. The loaded resin of the first column is washed with 8M hydrochloric acid solution to recover bismuth and then treated with strong nitric acid solution to recover polonium.

  18. Evaluation of five methods for derivatization and GC determination of a mixture of very long chain fatty acids (C24:0-C36:0).

    PubMed

    Antolín, Ernesto Méndez; Delange, David Marrero; Canavaciolo, Víctor González

    2008-01-07

    D003 is a new active ingredient consisting of a mixture of very long chain saturated fatty acids (C(24:0)-C(36:0)) in a definite proportion, which shows antioxidant, antiosteoporotic, antiplatelet and cholesterol-lowering effects in experimental models. Five derivatization methods for determining these fatty acids by gas chromatography (GC), using diazomethane, sulphuric acid-methanol, hydrochloric acid-methanol, boron trifluoride-methanol and N-methyl-N-trimethylsilyltrifluoroacetamide were evaluated. GC analysis was carried out using a BPX-5 wide-bore column and 1-nonadecanoic acid (C(19:0)) as internal standard. Methods were similar on account of the fatty acid content determined (84.2-86.6%). However, whereas the hydrochloric acid-methanol method needed 90 min to complete the derivatization, the other methods only required 10 min. Considering costs, speed, safety and GC response, the method using sulphuric acid-methanol was found the most appropriate for determining these fatty acids. The validation of this method: linearity over a range 40-160%, accuracy assessed through a recovery study, precision within day and inter-day, and specificity, even for samples subject to stress conditions, proved it is suitable for quality control and stability studies of the very long chain fatty acids composing this active ingredient.

  19. Lactic acid permeabilizes gram-negative bacteria by disrupting the outer membrane.

    PubMed

    Alakomi, H L; Skyttä, E; Saarela, M; Mattila-Sandholm, T; Latva-Kala, K; Helander, I M

    2000-05-01

    The effect of lactic acid on the outer membrane permeability of Escherichia coli O157:H7, Pseudomonas aeruginosa, and Salmonella enterica serovar Typhimurium was studied utilizing a fluorescent-probe uptake assay and sensitization to bacteriolysis. For control purposes, similar assays were performed with EDTA (a permeabilizer acting by chelation) and with hydrochloric acid, the latter at pH values corresponding to those yielded by lactic acid, and also in the presence of KCN. Already 5 mM (pH 4.0) lactic acid caused prominent permeabilization in each species, the effect in the fluorescence assay being stronger than that of EDTA or HCl. Similar results were obtained in the presence of KCN, except for P. aeruginosa, for which an increase in the effect of HCl was observed in the presence of KCN. The permeabilization by lactic and hydrochloric acid was partly abolished by MgCl(2). Lactic acid sensitized E. coli and serovar Typhimurium to the lytic action of sodium dodecyl sulfate (SDS) more efficiently than did HCl, whereas both acids sensitized P. aeruginosa to SDS and to Triton X-100. P. aeruginosa was effectively sensitized to lysozyme by lactic acid and by HCl. Considerable proportions of lipopolysaccharide were liberated from serovar Typhimurium by these acids; analysis of liberated material by electrophoresis and by fatty acid analysis showed that lactic acid was more active than EDTA or HCl in liberating lipopolysaccharide from the outer membrane. Thus, lactic acid, in addition to its antimicrobial property due to the lowering of the pH, also functions as a permeabilizer of the gram-negative bacterial outer membrane and may act as a potentiator of the effects of other antimicrobial substances.

  20. Lactic Acid Permeabilizes Gram-Negative Bacteria by Disrupting the Outer Membrane

    PubMed Central

    Alakomi, H.-L.; Skyttä, E.; Saarela, M.; Mattila-Sandholm, T.; Latva-Kala, K.; Helander, I. M.

    2000-01-01

    The effect of lactic acid on the outer membrane permeability of Escherichia coli O157:H7, Pseudomonas aeruginosa, and Salmonella enterica serovar Typhimurium was studied utilizing a fluorescent-probe uptake assay and sensitization to bacteriolysis. For control purposes, similar assays were performed with EDTA (a permeabilizer acting by chelation) and with hydrochloric acid, the latter at pH values corresponding to those yielded by lactic acid, and also in the presence of KCN. Already 5 mM (pH 4.0) lactic acid caused prominent permeabilization in each species, the effect in the fluorescence assay being stronger than that of EDTA or HCl. Similar results were obtained in the presence of KCN, except for P. aeruginosa, for which an increase in the effect of HCl was observed in the presence of KCN. The permeabilization by lactic and hydrochloric acid was partly abolished by MgCl2. Lactic acid sensitized E. coli and serovar Typhimurium to the lytic action of sodium dodecyl sulfate (SDS) more efficiently than did HCl, whereas both acids sensitized P. aeruginosa to SDS and to Triton X-100. P. aeruginosa was effectively sensitized to lysozyme by lactic acid and by HCl. Considerable proportions of lipopolysaccharide were liberated from serovar Typhimurium by these acids; analysis of liberated material by electrophoresis and by fatty acid analysis showed that lactic acid was more active than EDTA or HCl in liberating lipopolysaccharide from the outer membrane. Thus, lactic acid, in addition to its antimicrobial property due to the lowering of the pH, also functions as a permeabilizer of the gram-negative bacterial outer membrane and may act as a potentiator of the effects of other antimicrobial substances. PMID:10788373

  1. Soil washing of chromium- and cadmium-contaminated sludge using acids and ethylenediaminetetra acetic acid chelating agent.

    PubMed

    Gitipour, Saeid; Ahmadi, Soheil; Madadian, Edris; Ardestani, Mojtaba

    2016-01-01

    In this research, the effect of soil washing in the removal of chromium- and cadmium-contaminated sludge samples collected from Pond 2 of the Tehran Oil Refinery was investigated. These metals are considered as hazardous substances for human health and the environment. The carcinogenicity of chromate dust has been established for a long time. Cadmium is also a potential environmental toxicant. This study was carried out by collecting sludge samples from different locations in Pond 2. Soil washing was conducted to treat the samples. Chemical agents, such as acetic acid, ethylenediaminetetra acetic acid (EDTA) and hydrochloric acid, were used as washing solutions to remove chromium and cadmium from sludge samples. The results of this study indicated that the highest removal efficiencies from the sludge samples were achieved using a 0.3 M HCl solution with 82.69% and 74.47% for chromium and cadmium, respectively. EDTA (0.1 M) in the best condition extracted 66.81% of cadmium and 72.52% of chromium from the sludges. The lowest efficiency values for the samples, however, were achieved using 3 M acetic acid with 41.7% and 46.96% removals for cadmium and chromium, respectively. The analysis of washed sludge indicated that the heavy metals removal decreased in the order of 3 M acetic acid < 0.1 M EDTA<0.3 M HCl, thus hydrochloric acid appears to offer a greater potential as a washing agent in remediating the sludge samples.

  2. Acid tolerance in Salmonella typhimurium induced by culturing in the presence of organic acids at different growth temperatures.

    PubMed

    Alvarez-Ordóñez, Avelino; Fernández, Ana; Bernardo, Ana; López, Mercedes

    2010-02-01

    The influence of growth temperature and acidification of the culture medium up to pH 4.25 with acetic, citric, lactic and hydrochloric acids on the growth and subsequent acid resistance at pH 3.0 of Salmonella typhimurium CECT 443 was studied. The minimum pH value which allowed for S. typhimurium growth within the temperature range of 25-37 degrees C was 4.5 when the pH was reduced using citric and hydrochloric acids, and 5.4 and 6.4 when lactic acid and acetic acid were used, respectively. At high (45 degrees C) or low (10 degrees C) temperatures, the growth pH boundary was increased about 1 pH unit. The growth temperature markedly modified the acid resistance of the resulting cells. In all cases, D-values were lower for cells grown at 10 degrees C and significantly increased with increasing growth temperature up to 37 degrees C, at which D-values obtained were up to 10 times higher. Cells grown at 45 degrees C showed D-values similar to those found for cells grown at 25 degrees C. The growth of cells in acidified media, regardless of the pH value, caused an increase in their acid resistance at the four incubation temperatures, although the magnitude of the Acid Tolerance Response (ATR) observed depended on the growth temperature. Acid adapted cultures at 10 degrees C showed D-values ranging from 5.75 to 6.91 min, which turned out to be about 2 times higher than those corresponding to non-acid adapted cultures, while higher temperatures induced an increase in D-values of at least 3.5 times. Another finding was that, while at 10 and 45 degrees C no significant differences among the effect of the different acids tested in inducing an ATR were observed, when cells were grown at 25 and 37 degrees C citric acid generally turned out to be the acid which induced the strongest ATR. Results obtained in this study show that growth temperature is an important factor affecting S. typhimurium acid resistance and could contribute to find new strategies based on intelligent

  3. Effect of Ammonium- and Phosphonium-Based Ionic Liquids on the Separation of Lactic Acid by Supported Ionic Liquid Membranes (SILMs).

    PubMed

    Matsumoto, Michiaki; Panigrahi, Abhishek; Murakami, Yuuki; Kondo, Kazuo

    2011-05-13

    Biodegradable polymers have attracted much attention from an environmental point of view. Optically pure lactic acid that can be prepared by fermentation is one of the important raw materials for biodegradable polymer. The separation and purification of lactic acid from the fermentation broth are the major portions of the production costs. We proposed the application of supported ionic liquid membranes to recovering lactic acid. In this paper, the effect of ionic liquids, such as Aliquat 336, CYPHOS IL-101, CYPHOS IL-102, CYPHOS IL-104, CYPHOS IL-109 and CYPHOS IL-111 on the lactic acid permeation have been studied. Aliquat 336, CYPHOS IL-101 and CYPHOS IL-102 were found to be the best membrane solvents as far as membrane stability and permeation of lactic acid are concerned. CYPHOS IL-109 and CYPHOS IL-111 were found to be unsuitable, as they leak out from the pores of the supported liquid membrane (SLM), thereby allowing free transport of lactic acid as well as hydrochloric acid. CYPHOS IL-102 was found to be the most adequate (Permeation rate = 60.41%) among these ionic liquids as far as the separation of lactic acid is concerned. The permeation mechanisms, by which ionic liquid-water complexes act as the carrier of lactate and hydrochloric acid, were proposed. The experimental permeation results have been obtained as opposed to the expected values from the solution-diffusion mechanism.

  4. Characteristic constants of 2,2',4'-trihydroxyazobenzene-5-sulfonic acid, a reagent for spectrophotometric analysis

    USGS Publications Warehouse

    Fletcher, Mary H.

    1960-01-01

    The dye 2,2',4'-trihydroxyazobenzene-5-sulfonic acid, has shown promise as a reagent for the determination of zirconium. As the literature contains very little information about this dye, basic data pertinent to its use as a reagent were determined. The sulfonic acid group and all three of the hydroxy groups show acidic characteristics. Apparent dissociation constants were determined for the three more labile protons and the approximate order of magnitude for the fourth constant was estimated. Absorption spectra for the different ionization species are given. A curve is also included which shows the fraction of dye in the different ionization forms at acidities from 10.35M hydrochloric acid to pH 11.9. A sixth dye species was found in 1.0 to 8.4M potassium hydroxide solutions, but its nature is unknown.

  5. Spin-Spin Interactions in the Oxides A(3)M'MO(6) (M = Rh, Ir; A = Ca, Sr; M' = Alkaline Earth, Zn, Cd, Na) of the K(4)CdCl(6) Structure Type Examined by Electronic Structure Calculations.

    PubMed

    Lee, K.-S.; Koo, H.-J.; Whangbo, M.-H.

    1999-05-03

    The oxides A(3)M'MO(6) (M = Rh, Ir; A = Ca, Sr; M' = alkaline earth, Zn, Cd) of the K(4)CdCl(6) structure type consist of isolated (MO(6))(8)(-) octahedral anions and exhibit an antiferromagnetic ordering at low temperatures. The spin-spin interactions in these oxides, Ca(3)NaMO(6) (M = Ir, Ru), and Sr(3)NaRuO(6) were examined by calculating how strongly the t(2g)-block levels of adjacent (MO(6))((6+)(n)()())(-) (n = 1, 2) anions interact in the presence and absence of the intervening cations A(2+) and M' (n)()(+) (n = 1, 2). Our calculations show that the spin-spin interactions in these oxides are three-dimensional, and the superexchange interactions occur mainly through the short intrachain and interchain M-O.O-M linkages. When the M(n)()(+) cation is very small compared with the A(2+) cation, the intrachain interaction is substantially stronger than the interchain interaction. The opposite is found when the sizes of the M(n)()(+) and A(2+) cations become similar.

  6. Low-temperature superstructures of a series of Cd6M (M = Ca, Y, Sr, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) crystalline approximants.

    PubMed

    Nishimoto, Kazue; Sato, Takeru; Tamura, Ryuji

    2013-06-12

    The low-temperature (LT) superstructure and the phase transition temperature have been investigated for a series of Cd6M crystalline approximants by transmission electron microscopy as well as electrical resistivity measurements. Except for M = Lu, Cd6M is found to undergo a phase transition to a monoclinic phase at a low temperature and the transition temperature (Tc) scales well with the size of the M atom. For M = Ca, Y, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er and Tm the LT superstructure is explained by a √2a × a × √2a lattice with the space group C2/c, and for M = Sr and Yb a √2a × 2a × √2a monoclinic lattice with P2/m. On the other hand, no phase transition is observed for M = Lu, indicating that a Cd4 tetrahedron at the cluster center remains disordered down to the lowest temperature, i.e. 16 K. It is shown that the volume inside the Cd20 dodecahedron plays a crucial role in the occurrence of the phase transition, and long-term aging in particular promotes the phase transition for late rare-earth elements such as Ho, Er and Tm, suggesting that the transition is sensitive to and is even hindered by disorder such as atomic vacancies. The absence of the transition for M = Lu is attributed to the highest activation energy for the transition due to the smallest volume inside the Cd20 dodecahedron.

  7. Core acid treatment influence on well reservoir properties in Kazan oil-gas condensate field

    NASA Astrophysics Data System (ADS)

    Janishevskii, A.; Ezhova, A.

    2015-11-01

    The research involves investigation of the influence of hydrochloric acid (HCI-12%) and mud acid (mixture: HCl - 10% and HF - 3%) treatment on the Upper-Jurassic reservoir properties in Kazan oil-gas condensate field wells. The sample collection included three lots of core cylinders from one and the same depth (all in all 42). Two lots of core cylinders were distributed as following: first lot - reservoir properties were determined, and, then thin sections were cut off from cylinder faces; second lot- core cylinders were exposed to hydrochloric acid treatment, then, after flushing the reservoir properties were determined, and thin sections were prepared. Based on the quantitative petrographic rock analysis, involvin 42 thin sections, the following factors were determined: granulometric mineral composition, cement content, intergranular contacts and pore space structure. According to the comparative analysis of initial samples, the following was determined: content decrease of feldspar, clay and mica fragments, mica, clay and carbonate cement; increase of pore spaces while in the investigated samples- on exposure of rocks to acids effective porosity and permeability value range is ambiguous.

  8. Recovery of calcium carbonate from steelmaking slag and utilization for acid mine drainage pre-treatment.

    PubMed

    Mulopo, J; Mashego, M; Zvimba, J N

    2012-01-01

    The conversion of steelmaking slag (a waste product of the steelmaking process) to calcium carbonate (CaCO(3)) was tested using hydrochloric acid, ammonium hydroxide and carbon dioxide via a pH-swing process. Batch reactors were used to assess the technical feasibility of calcium carbonate recovery and its use for pre-treatment of acid mine drainage (AMD) from coal mines. The effects of key process parameters, such as the amount of acid (HCl/calcium molar ratio), the pH and the CO(2) flow rate were considered. It was observed that calcium extraction from steelmaking slag significantly increased with an increase in the amount of hydrochloric acid. The CO(2) flow rate also had a positive effect on the carbonation reaction rate but did not affect the morphology of the calcium carbonate produced for values less than 2 L/min. The CaCO(3) recovered from the bench scale batch reactor demonstrated effective neutralization ability during AMD pre-treatment compared with the commercial laboratory grade CaCO(3).

  9. Chromotropic acid-formaldehyde reaction in strongly acidic media. The role of dissolved oxygen and replacement of concentrated sulphuric acid.

    PubMed

    Fagnani, E; Melios, C B; Pezza, L; Pezza, H R

    2003-05-28

    The procedure for formaldehyde analysis recommended by the National Institute for Occupational Safety and Health (NIOSH) is the Chromotropic acid spectrophotometric method, which is the one that uses concentrated sulphuric acid. In the present study the oxidation step associated with the aforementioned method for formaldehyde determination was investigated. Experimental evidence has been obtained indicating that when concentrated H(2)SO(4) (18 mol l(-1)) is used (as in the NIOSH procedure) that acid is the oxidizing agent. On the other hand, oxidation through dissolved oxygen takes place when concentrated H(2)SO(4) is replaced by concentrated hydrochloric (12 mol l(-1)) and phosphoric (14.7 mol l(-1)) acids as well as by diluted H(2)SO(4) (9.4 mol l(-1)). Based on investigations concerning the oxidation step, a modified procedure was devised, in which the use of the potentially hazardous and corrosive concentrated H(2)SO(4) was eliminated and advantageously replaced by a less harmful mixture of HCl and H(2)O(2).

  10. New Acid Stimulation Treatment to Sustain Production - Los Angeles Downtown Oil Field

    SciTech Connect

    Russell, Richard C.

    2003-03-10

    Hydrochloric acid stimulation was successfully used on several wells in the Los Angeles Downtown Field, in the past. The decline rates after stimulation were relatively high and generally within six months to a year, production rates have returned to their prestimulation rates. The wells in Los Angeles Downtown Field have strong scale producing tendencies and many wells are treated for scale control. Four wells were carefully selected that are representative of wells that had a tendency to form calcium carbonate scale and had shown substantial decline over the last few years.

  11. Extraction of palladium from acidic solutions with the use of carbon adsorbents

    SciTech Connect

    O.N. Kononova; N.G. Goryaeva; N.B. Dostovalova; S.V. Kachin; A.G. Kholmogorov

    2007-08-15

    We studied the sorption of palladium(II) on LKAU-4, LKAU-7, and BAU carbon adsorbents from model hydrochloric acid solutions and the solutions of spent palladium-containing catalysts. It was found that sorbents based on charcoal (BAU) and anthracite (LKAU-4) were characterized by high sorption capacities for palladium. The kinetics of the saturation of carbon adsorbents with palladium(II) ions was studied, and it was found that more than 60% of the initial amount of Pd(II) was recovered in a 1-h contact of an adsorbent with a model solution. This value for the solutions of spent catalysts was higher than 35%.

  12. Studies on solid solutions based on layered honeycomb-ordered phases P2-Na{sub 2}M{sub 2}TeO{sub 6} (M=Co, Ni, Zn)

    SciTech Connect

    Berthelot, Romain; Schmidt, Whitney; Sleight, A.W.; Subramanian, M.A.

    2012-12-15

    Three complete solid solutions between the layered phases P2-Na{sub 2}M{sub 2}TeO{sub 6} (M=Co, Ni, Zn) have been prepared by conventional solid state method and investigated through X-ray diffraction, magnetism and optical measurements. All compositions are characterized by a M{sup 2+}/X{sup 6+} honeycomb ordering within the slabs and crystallize in a hexagonal unit cell. However, a structural transition based on a different stacking is observed as nickel (space group P6{sub 3}/mcm) is substituted by zinc or cobalt (space group P6{sub 3}22). All compositions exhibit a paramagnetic Curie-Weiss behavior at high temperatures; and the magnetic moment values confirm the presence of Ni{sup 2+} and/or Co{sup 2+} cations. The low-temperature antiferromagnetic order of Na{sub 2}Ni{sub 2}TeO{sub 6} and Na{sub 2}Co{sub 2}TeO{sub 6} is suppressed by zinc substitution. The color of the obtained compositions varies from pink, to light green and white when M=Co, Ni, Zn, respectively. - Graphical abstract: The comparison between the structure of Na{sub 2}Ni{sub 2}TeO{sub 6} (left) and Na{sub 2}M{sub 2}TeO{sub 6} (M=Co, Zn) (right) evidences the stacking difference with distinct atom sequences along the hexagonal c-axis. Highlights: Black-Right-Pointing-Pointer Solid solutions between lamellar phases Na{sub 2}M{sub 2}TeO{sub 6} (M=Co, Ni, Zn) are investigated. Black-Right-Pointing-Pointer A M{sup 2+}/X{sup 6+} honeycomb ordering characterized all the compositions. Black-Right-Pointing-Pointer A structural transition is shown when Ni is replaced by Co or Zn. Black-Right-Pointing-Pointer The low-temperature AFM ordering of Na{sub 2}Ni{sub 2}TeO{sub 6} and Na{sub 2}Co{sub 2}TeO{sub 6} is suppressed by zinc substitution. Black-Right-Pointing-Pointer Color changes from pink to light green and white when M=Co, Ni, Zn, respectively.

  13. Effect of Nanosize SiO2 Particles Added into Electrolyte on the Composition and Morphology of Oxide Layers Formed in Alloy AK6M2 Under Microarc Oxidizing

    NASA Astrophysics Data System (ADS)

    Krishtal, M. M.; Ivashin, P. V.; Yasnikov, I. S.; Polunin, A. V.

    2015-11-01

    Oxide layers formed on AK6M2 aluminum-silicon alloy by microarc oxidizing (MO) are studied. The chemical and phase compositions and the morphology of the layers deposited from a base-composition electrolyte with different contents of added SiO2 powder are determined. It is shown that high-temperature phases form in the oxide layer at a specific concentration of SiO2 nanoparticles. This indicates elevation of the effective temperature in the zone of synthesis of the oxide layers in the process of MO. The addition of nanosize particles of SiO2 into the electrolyte influences positively the operating characteristics of the formed oxide layer.

  14. Ferromagnetic interactions between imino nitroxides through diamagnetic metal ions: Crystal structures, magnetism, and electronic properties of [M{sup I}(imino nitroxide){sub 2}](PF{sub 6}) (M = Cu{sup I} and Ag{sup I})

    SciTech Connect

    Oshio, Hiroki; Watanabe, Takashi; Ohto, Akihiro

    1997-07-02

    Ferromagnetic interactions between imino nitroxides through Diamagnetic Metal Ions: Crystal Structures, Magnetism, and Electronic Properties of [M{sup I}(imino nitroxide){sub 2}](PF{sub 6}) (M = Cu{sup I} and Ag{sup I}) Cu(I) and Ag(I) complexes with imino nitroxides, [Cu{sup I}-(immepy){sub 2}](PF{sub 6}) and [Ag{sup I}(impy){sub 2}](PF{sub 6}), were structurally and magnetically characterized. Magnetic susceptibility and EPR measurements revealed that the magnetic interaction in the Cu(I) complex is ferromagnetic with a J value of 55.1(6) cm{sup -1} (g = 2.0 and H = -JS{sub 1}{center_dot}S{sub 2}), while the Ag(I) complex shows a very weak ferromagnetic interaction. The magnetic behaviors were discussed in terms of orthogonality of magnetic orbitals and metal to ligand charge-transfer interactions.

  15. A- and B-site doping effect on physicochemical properties of Sr2-xBaxMMoO6 (M = Mg, Mn, Fe) double perovskites — candidate anode materials for SOFCs

    NASA Astrophysics Data System (ADS)

    Zheng, Kun; Świerczek, Konrad

    2016-06-01

    In this work, we evaluate the physicochemical properties of Sr2-xBaxMMoO6 (M = Mg, Mn, Fe) double perovskites as alternative anode materials for solid oxide fuel cells, for which the effect of substitution of strontium by barium in a full range of compositions is studied. The crystal structure, microstructure, characterization of transport properties (electrical conductivity, Seebeck coefficient) and oxygen content as a function of temperature, as well as chemical stability in oxidizing and reducing conditions are discussed. Fe- and Mo-containing Sr2-xBaxFeMoO6 oxides show very high total conductivities with values of 100-1000 Sṡcm-1, while Sr2-xBaxMgMoO6 present good redox stability.

  16. Low-temperature superstructures of a series of Cd6M (M = Ca, Y, Sr, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) crystalline approximants

    NASA Astrophysics Data System (ADS)

    Nishimoto, Kazue; Sato, Takeru; Tamura, Ryuji

    2013-06-01

    The low-temperature (LT) superstructure and the phase transition temperature have been investigated for a series of Cd6M crystalline approximants by transmission electron microscopy as well as electrical resistivity measurements. Except for M = Lu, Cd6M is found to undergo a phase transition to a monoclinic phase at a low temperature and the transition temperature (Tc) scales well with the size of the M atom. For M = Ca, Y, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er and Tm the LT superstructure is explained by a \\sqrt{2}a\\times a\\times \\sqrt{2}a lattice with the space group C2/c, and for M = Sr and Yb a \\sqrt{2}a\\times 2 a\\times \\sqrt{2}a monoclinic lattice with P2/m. On the other hand, no phase transition is observed for M = Lu, indicating that a Cd4 tetrahedron at the cluster center remains disordered down to the lowest temperature, i.e. 16 K. It is shown that the volume inside the Cd20 dodecahedron plays a crucial role in the occurrence of the phase transition, and long-term aging in particular promotes the phase transition for late rare-earth elements such as Ho, Er and Tm, suggesting that the transition is sensitive to and is even hindered by disorder such as atomic vacancies. The absence of the transition for M = Lu is attributed to the highest activation energy for the transition due to the smallest volume inside the Cd20 dodecahedron.

  17. 40 CFR 63.8985 - Am I subject to this subpart?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This Subpart... Hazardous Air Pollutants for Steel Pickling—HCl Process Facilities and Hydrochloric Acid Regeneration...

  18. 40 CFR 63.8980 - What is the purpose of this subpart?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This... (HAP) emitted from hydrochloric acid (HCl) production. This subpart also establishes requirements...

  19. 40 CFR 63.8980 - What is the purpose of this subpart?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This... (HAP) emitted from hydrochloric acid (HCl) production. This subpart also establishes requirements...

  20. 40 CFR 63.8980 - What is the purpose of this subpart?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This... (HAP) emitted from hydrochloric acid (HCl) production. This subpart also establishes requirements...

  1. 40 CFR 63.8980 - What is the purpose of this subpart?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This... (HAP) emitted from hydrochloric acid (HCl) production. This subpart also establishes requirements...

  2. 40 CFR 63.8980 - What is the purpose of this subpart?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Hydrochloric Acid Production What This... (HAP) emitted from hydrochloric acid (HCl) production. This subpart also establishes requirements...

  3. Effect of strong acids on red mud structural and fluoride adsorption properties.

    PubMed

    Liang, Wentao; Couperthwaite, Sara J; Kaur, Gurkiran; Yan, Cheng; Johnstone, Dean W; Millar, Graeme J

    2014-06-01

    The removal of fluoride using red mud has been improved by acidifying red mud with hydrochloric, nitric and sulphuric acid. The acidification of red mud causes sodalite and cancrinite phases to dissociate, confirmed by the release of sodium and aluminium into solution as well as the disappearance of sodalite bands and peaks in infrared and X-ray diffraction data. The dissolution of these mineral phases increases the amount of available iron and aluminium oxide/hydroxide sites that are accessible for the adsorption of fluoride. However, concentrated acids have a negative effect on adsorption due to the dissolution of these iron and aluminium oxide/hydroxide sites. The removal of fluoride is dependent on the charge of iron and aluminium oxide/hydroxides on the surface of red mud. Acidifying red mud with hydrochloric, nitric and sulphuric acid resulted in surface sites of the form ≡SOH2(+) and ≡SOH. Optimum removal is obtained when the majority of surface sites are in the form ≡SOH2(+) as the substitution of a fluoride ion does not cause a significant increase in pH. This investigation shows the importance of having a low and consistent pH for the removal of fluoride from aqueous solutions using red mud.

  4. Chemical equilibrium of minced turkey meat in organic acid solutions.

    PubMed

    Goli, T; Abi Nakhoul, P; Zakhia-Rozis, N; Trystram, G; Bohuon, P

    2007-02-01

    The distribution of acid (HA), anions (A(-)), free protons (H(3)O(+)) and bound protons (H(b)), in homogenized turkey meat was evaluated at various meat/water mass ratios of (1/4-1/10) during titration with acetic acid (0.25N) or lactic acid (0.2N). H(b) concentration was determined by titration with hydrochloric acid (0.075N) and a correlation for [H(b)]=f(pH) was proposed. A procedure was used to calculate the fractions of the various species in equilibrium, starting from an initial acid concentration in a meat/water system and assuming the accuracy of the pK(a) value of the pure weak acids despite the chemical complexity of meat. Calculated results were in very good agreement (±0.15) with experimental pH values, whatever the acid, meat batch or meat/water mass ratios used. Less than 1% of the total protons were free (H(3)O(+)) and determined the meat pH.

  5. Solution of rocks and refractory minerals by acids at high temperatures and pressures. Determination of silica after decomposition with hydrofluoric acid

    USGS Publications Warehouse

    May, I.; Rowe, J.J.

    1965-01-01

    A modified Morey bomb was designed which contains a removable nichromecased 3.5-ml platinium crucible. This bomb is particularly useful for decompositions of refractory samples for micro- and semimicro-analysis. Temperatures of 400-450?? and pressures estimated as great as 6000 p.s.i. were maintained in the bomb for periods as long as 24 h. Complete decompositions of rocks, garnet, beryl, chrysoberyl, phenacite, sapphirine, and kyanite were obtained with hydrofluoric acid or a mixture of hydrofluoric and sulfuric acids; the decomposition of chrome refractory was made with hydrochloric acid. Aluminum-rich samples formed difficultly soluble aluminum fluoride precipitates. Because no volatilization losses occur, silica can be determined on sample solutions by a molybdenum-blue procedure using aluminum(III) to complex interfering fluoride. ?? 1965.

  6. Utilizing acid pretreatment and electrospinning to improve biocompatibility of poly(glycolic acid) for tissue engineering.

    PubMed

    Boland, Eugene D; Telemeco, Todd A; Simpson, David G; Wnek, Gary E; Bowlin, Gary L

    2004-10-15

    Poly(glycolic acid) (PGA) has a long history as a bioresorbable polymer. Its biocompatibility is widely accepted, yet PGA is often rejected as a soft-tissue scaffold because of fibrous encapsulation. The goal of this study was to improve the soft-tissue biocompatibility of PGA by producing scaffolds composed of small-diameter fibers through electrospinning and subjecting these scaffolds to a concentrated hydrochloric acid (HCL) pretreatment. The theory is that small-diameter fibers will elicit a reduced immune response and HCl treatment will improve cellular interactions. Scaffolds were characterized in terms of fiber diameter and pore area via image-analysis software. Biocompatibility was assessed through a WST-1 cell-proliferation assay (in vitro) with the use of rat cardiac fibroblasts and rat intramuscular implantations (in vivo). Fibers produced ranged in diameter from 0.22 to 0.88 microm with pore areas from 1.84 to 13.22 microm(2). The untreated scaffold composed of 0.88-microm fibers was encapsulated in vivo and supported the lowest rates of cell proliferation. On the contrary, the acid pretreated scaffold with 0.22-microm fibers was incorporated into the surrounding tissue and exhibited proliferation rates that exceeded the control populations on tissue-culture plastic. In conclusion, this study has shown the ability to improve the biocompatibility of PGA through acid pretreatment of scaffolds comprised of submicron fiber diameters.

  7. Increased apolipoprotein E and c-fms gene expression without elevated interleukin 1 or 6 mRNA levels indicates selective activation of macrophage functions in advanced human atheroma.

    PubMed Central

    Salomon, R N; Underwood, R; Doyle, M V; Wang, A; Libby, P

    1992-01-01

    Cells found within atherosclerotic lesions can produce in culture protein mediators that may participate in atherogenesis. To test whether human atheromata actually contain transcripts for certain of these genes, we compared levels of mRNAs in carotid or coronary atheromata and in nonatherosclerotic human vessels by polymerase chain reaction (PCR) amplification of cDNAs reverse-transcribed from RNA. We measured PCR products (generated during exponential amplification) by incorporation of 32P-labeled primers. Levels of interleukin 1 alpha, 1 beta, or 6 mRNAs in plaques and controls did not differ. Compared to uninvolved vessels, plaques did contain higher levels of mRNA encoding platelet-derived growth factor A chain (42 +/- 24 vs. 12 +/- 10 fmol of product; mean +/- SD; n = 8 and 8, respectively; P = 0.007) and B chain (41 +/- 36 vs. 4 +/- 3 fmol of product, n = 14 and 6, respectively; P = 0.024). Atherosclerotic lesions consistently had much higher levels of apolipoprotein E (apoE) mRNA than did control vessels (131 +/- 71 vs. 5 +/- 3 fmol of product; n = 12 and 10, respectively; P less than 0.001). Direct RNA blot analyses confirmed elevated levels of apoE mRNA in plaque extracts. To test whether mononuclear phagocytes might be a source of the apoE mRNA, we studied a selective marker for cells of the monocytic lineage, the c-fms protooncogene, which encodes the receptor for macrophage colony-stimulating factor. Plaques also contained elevated levels of c-fms mRNA (30 +/- 17 vs. 5 +/- 3 fmol of product; n = 10 and 7, respectively; P = 0.002). Immunohistochemical colocalization demonstrated apoE protein in association with macrophages in plaques, whereas nonatherosclerotic vessels showed no immunoreactive apoE. ApoE produced locally in atheroma might modulate the functions of lesional T cells or promote "reverse cholesterol transport" by associating with high density lipoprotein particles, thus targeting them for peripheral uptake. Macrophages within the advanced

  8. Density functional theory analysis of the interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in Ca3CoMO6 (M = Co, Rh, Ir).

    PubMed

    Zhang, Yuemei; Kan, Erjun; Xiang, Hongjun; Villesuzanne, Antoine; Whangbo, Myung-Hwan

    2011-03-07

    In the isostructural oxides Ca(3)CoMO(6) (M = Co, Rh, Ir), the CoMO(6) chains made up of face-sharing CoO(6) trigonal prisms and MO(6) octahedra are separated by Ca atoms. We analyzed the magnetic and electronic properties of these oxides on the basis of density functional theory calculations including on-site repulsion and spin-orbit coupling, and examined the essential one-electron pictures hidden behind results of these calculations. Our analysis reveals an intimate interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in governing the magnetic and electronic properties of these oxides. These oxides undergo a Jahn-Teller distortion, but their distortions are weak, so that their trigonal-prism Co(n+) (n = 2, 3) ions still give rise to strong easy-axis anisotropy along the chain direction. As for the d-state split pattern of these ions, the electronic and magnetic properties of Ca(3)CoMO(6) (M = Co, Rh, Ir) are consistent with d(0) < (d(2), d(-2)) < (d(1), d(-1)) but not with (d(2), d(-2)) < d(0) < (d(1), d(-1)). The trigonal-prism Co(3+) ion in Ca(3)Co(2)O(6) has the L = 2 configuration (d(0))(1)(d(2), d(-2))(3)(d(1), d(-1))(2) because of the metal-metal interaction between adjacent Co(3+) ions in each Co(2)O(6) chain, which is mediated by their z(2) orbitals, and the spin-orbit coupling of the trigonal-prism Co(3+) ion. The spins in each CoMO(6) chain of Ca(3)CoMO(6) prefer the ferromagnetic arrangement for M = Co and Rh but the antiferromagnetic arrangement for M = Ir. The octahedral M(4+) ion of Ca(3)CoMO(6) has the (1a)(1)(1e)(4) configuration for M = Rh but the (1a)(2)(1e)(3) configuration for M = Ir, which arises from the difference in the spin-orbit coupling of the M(4+) ions and the Co···M metal-metal interactions.

  9. 77 FR 56200 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-12

    ... Request; NESHAP for Hydrochloric Acid Production (Renewal) AGENCY: Environmental Protection Agency (EPA...: NESHAP for Hydrochloric Acid Production (Renewal). ICR Numbers: EPA ICR Number 2032.07, OMB Control... disclose the information. Respondents/Affected Entities: Owners or operators of hydrochloric...

  10. Determination of the Efficiency of Mixed-Acid Digestions of Sediments

    SciTech Connect

    Huerta Vazquez, Alejandra I.; Gill, Gary A.

    2007-01-01

    Mixed-acid digestion is a method often used for the determination of elemental analysis of sediment samples. It is crucial that efficiency details associated with the digestion method be well understood on an element by element basis. Battelle’s Marine Sciences Laboratory Standard Operating Procedure for Sediment Mixed-Acid Digestions was modified to identify conditions which produce optimal recovery of elements. The parameters that were adjusted for testing were mass of sediment, mixed-acid volume, mixed-acid composition and digestion time. Digestion involves treatment of the sediment sample with mixed-acid mixtures at 135º C ± 10º in a Teflon® digestion bomb. Typical analytical methods include Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) and Inductively Coupled Plasma – Mass Spectrometry (ICP-MS). Initial experiments involved determining the optimal ratio of acid volume to mass of sediment. Experiments were designed to identify the point at which insufficient acid was used to effectively digest a given mass of sediment. When the mass of sediment was varied between 0.2 and 1.0 gram using a 4 mL aqua regia acid mixture (3 mL hydrochloric acid and 1 mL nitric acid), there was no effect on the recovery of the elements Al, Ba, Ca, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr, Ti, V, and Zn. The next experiments focused on a time study to resolve the shortest digestive time for optimal elemental recovery. Two masses of sediment were investigated, 0.25 and 0.7 g, again utilizing aqua regia digestion (4 mL). Maximum recovery was reached after 4 hours of digestion; additional digestion time released no or only minimal amounts of elements from the sediments. The final set of experiments was designed to identify optimal conditions for the total digestion of sediment using a mixture of hydrochloric acid, nitric acid, hydrofluoric acid, hydrogen peroxide, and boric acid. These experiments were designed to determine the optimal volume of hydrofluoric acid

  11. Ethanol and xylitol production by fermentation of acid hydrolysate from olive pruning with Candida tropicalis NBRC 0618.

    PubMed

    Mateo, Soledad; Puentes, Juan G; Moya, Alberto J; Sánchez, Sebastián

    2015-08-01

    Olive tree pruning biomass has been pretreated with pressurized steam, hydrolysed with hydrochloric acid, conditioned and afterwards fermented using the non-traditional yeast Candida tropicalis NBRC 0618. The main aim of this study was to analyse the influence of acid concentration on the hydrolysis process and its effect on the subsequent fermentation to produce ethanol and xylitol. From the results, it could be deduced that both total sugars and d-glucose recovery were enhanced by increasing the acid concentration tested; almost the whole hemicellulose fraction was hydrolysed when 3.77% was used. It has been observed a sequential production first of ethanol, from d-glucose, and then xylitol from d-xylose. The overall ethanol and xylitol yields ranged from 0.27 to 0.38kgkg(-1), and 0.12 to 0.23kgkg(-1) respectively, reaching the highest values in the fermentation of the hydrolysates obtained with hydrochloric acid 2.61% and 1.11%, respectively.

  12. Improving clarity and stability of skim milk powder dispersions by dissociation of casein micelles at pH 11.0 and acidification with citric acid.

    PubMed

    Pan, Kang; Zhong, Qixin

    2013-09-25

    Casein micelles in milk cause turbidity and have poor stability at acidic conditions. In this study, skim milk powder dispersions were alkalized to pH 10.0 or 11.0, corresponding to reduced particle mass. In the following acidification with hydrochloric or citric acid, the re-formation of casein particles was observed. The combination of treatment at pH 11.0 and acidification with citric acid resulted in dispersions with the lowest turbidity and smallest particles, which enabled translucent dispersions at pH 5.5-7.0, corresponding to discrete nanoparticles. The concentration of ionic calcium was lower when acidified with citric acid than hydrochloric acid, corresponding to smaller particles with less negative zeta potential. The pH 11.0 treatment followed by acidification with citric acid also resulted in smaller particles than the simple chelating effects (directly implementing sodium citrate). The produced casein nanoparticles with reduced dimensions can be used for beverage and other novel applications.

  13. A hydrometallurgical process for the recovery of terbium from fluorescent lamps: Experimental design, optimization of acid leaching process and process analysis.

    PubMed

    Innocenzi, Valentina; Ippolito, Nicolò Maria; De Michelis, Ida; Medici, Franco; Vegliò, Francesco

    2016-12-15

    Terbium and rare earths recovery from fluorescent powders of exhausted lamps by acid leaching with hydrochloric acid was the objective of this study. In order to investigate the factors affecting leaching a series of experiments was performed in according to a full factorial plan with four variables and two levels (4(2)). The factors studied were temperature, concentration of acid, pulp density and leaching time. Experimental conditions of terbium dissolution were optimized by statistical analysis. The results showed that temperature and pulp density were significant with a positive and negative effect, respectively. The empirical mathematical model deducted by experimental data demonstrated that terbium content was completely dissolved under the following conditions: 90 °C, 2 M hydrochloric acid and 5% of pulp density; while when the pulp density was 15% an extraction of 83% could be obtained at 90 °C and 5 M hydrochloric acid. Finally a flow sheet for the recovery of rare earth elements was proposed. The process was tested and simulated by commercial software for the chemical processes. The mass balance of the process was calculated: from 1 ton of initial powder it was possible to obtain around 160 kg of a concentrate of rare earths having a purity of 99%. The main rare earths elements in the final product was yttrium oxide (86.43%) following by cerium oxide (4.11%), lanthanum oxide (3.18%), europium oxide (3.08%) and terbium oxide (2.20%). The estimated total recovery of the rare earths elements was around 70% for yttrium and europium and 80% for the other rare earths.

  14. Effects of occupation-numbers in (3d-5d) and U energy on transport and magnetic properties of complex perovskites Pb2MReO6 (M = Cr, Mn and Fe) by LSDA and LSDA + U methods

    NASA Astrophysics Data System (ADS)

    Musa Saad H.-E., M.

    2017-02-01

    Three compounds of lead-based complex perovskites Pb2MReO6 (M = Cr, Mn and Fe) have been investigated in detail based on density functional theory (DFT) using local spin density approximation (LSDA) and (LSDA + U) methods. By introducing a series of 3d-ions in M-site, the number of valence electrons that occupied the 3d-orbitals can be increased from Cr3+(3d3) to Mn2+(3d5) and Fe3+(3d5), and this beside the effect of energy U are the main factors that influenced the physical properties of Pb2MReO6. Magnetic and electronic calculations showed that all Pb2MReO6 compounds have ferrimagnetic half-metallic (FI-HM) properties. FI-HM are attributed to the M (3d)-Re (5d) hybridization through the strong 180° super-exchange (SE) interaction via the long-range pathway M (3d)↑-O (2p)-Re (5d)↓, in conformity with both Pauli Exclusion principles and Goodenough-Kanamori rules. This result is interpreted within a scenario where the Re (5d) states play a crucial role in the FI-HM ground state.

  15. Morphofunctional study of 12-O-tetradecanoyl-13-phorbol acetate (TPA)-induced differentiation of U937 cells under exposure to a 6 mT static magnetic field.

    PubMed

    Dini, Luciana; Dwikat, Majdi; Panzarini, Elisa; Vergallo, Cristian; Tenuzzo, Bernadetta

    2009-07-01

    This study deals with the morphofunctional influence of 72 h exposure to a 6 mT static magnetic field (SMF) during differentiation induced by 50 ng/ml 12-O-tetradecanoyl-13-phorbol acetate (TPA) in human leukaemia U937 cells. The cell morphology of U937 cells was investigated by optic and electron microscopy. Specific antibodies and/or molecules were used to label CD11c, CD14, phosphatidylserine, F-actin and to investigate the distribution and activity of lysosomes, mitochondria and SER. [Ca(2+)](i) was evaluated with a spectrophotometer. The degree of differentiation in SMF-exposed cells was lower than that of non-exposed cells, the difference being exposure time-dependent. SMF-exposed cells showed cell shape and F-actin modification, inhibition of cell attachment, appearance of membrane roughness and large blebs and impaired expression of specific macrophagic markers on the cell surface. The intracellular localization of SER and lysosomes was only partially affected by exposure. A significant localization of mitochondria with an intact membrane potential at the cell periphery in non-exposed, TPA-stimulated cells was observed; conversely, in the presence of SMF, mitochondria were mainly localised near the nucleus. In no case did SMF exposure affect cell viability. The sharp intracellular increase of [Ca(2+)](i) could be one of the causes of the above-described changes.

  16. Theoretical investigation of the structure and nature of the interaction in metal-alkane σ-complexes of the type [M(CO) 5(C 2H 6)] (M = Cr, Mo, and W)

    NASA Astrophysics Data System (ADS)

    Da Silva, Júlio C. S.; De Almeida, Wagner B.; Rocha, Willian R.

    2009-11-01

    Density Functional Theory calculations were carried out to study the structure, energetics of the interactions and nature of the bonds in the metal-alkane σ-complexes of the type M(CO) 5(C 2H 6) M = Cr, Mo, and W. Only the η 1 coordination mode through hydrogen is obtained. The vibrational frequencies showed that upon coordination the ν(C-H) asym mode has an important red shift of 273 cm -1 and thus may be an important mode to characterize and follow the alkane coordination to the metallic fragment. TD-DFT calculations of the electronic transitions show that the coordination of the alkane affects drastically the metal to ligand charge transfer (MLCT) band of the metallic fragment, showing a blue shift of 163 nm. The computed AIM local properties ( ρ( r), ∇2(ρ), G( r), V( r) and H( r)) in conjunction with the Morokuma energy decomposition analysis (EDA) and also comparisons with the water dimer, suggest that this metal-alkane interaction may also be viewed as an unconventional hydrogen bond, with significant charge transfer and polarization contribution.

  17. Synthesis, characterization of double perovskite Ca{sub 2}MSbO{sub 6} (M = Dy, Fe, Cr, Al) materials via sol–gel auto-combustion and their catalytic properties

    SciTech Connect

    Feraru, S.; Samoila, P.; Borhan, A.I.; Ignat, M.; Iordan, A.R.; Palamaru, M.N.

    2013-10-15

    Double perovskite-type oxide Ca{sub 2}MSbO{sub 6} materials, where M = Dy, Fe, Cr, and Al, were prepared by using the sol–gel auto-combustion method. The role of different B-site cations on their synthesis, structures, morphologies and catalytic properties was investigated. The progress of double-perovskite type structure formation and the disappearance of the organic phases were monitored by infrared absorption spectroscopy (FTIR). Double perovskite oxide structures were evaluated using X-ray diffraction (XRD), while the microstructure of obtained compounds was studied using scanning electron microscopy (SEM). Also, BET surface areas were measured at the liquid nitrogen temperature by nitrogen adsorption. Catalytic properties of the obtained compounds were evaluated by test reaction of hydrogen peroxide decomposition. - Highlights: • Ca{sub 2}MSbO{sub 6} double perovskites were obtained by sol–gel auto-combustion method. • Ca{sub 2}MSbO{sub 6} (M = Dy, Fe, Cr and Al) as catalysts in H{sub 2}O{sub 2} decomposition • Strong relationship between particles' shape, BET area and catalytic performance • Ca{sub 2}FeSbO{sub 6} spherical grains show superior catalytic activity.

  18. Oral hygiene products and acidic medicines.

    PubMed

    Hellwig, E; Lussi, A

    2006-01-01

    Acidic or EDTA-containing oral hygiene products and acidic medicines have the potential to soften dental hard tissues. The low pH of oral care products increases the chemical stability of some fluoride compounds, favors the incorporation of fluoride ions in the lattice of hydroxyapatite and the precipitation of calcium fluoride on the tooth surface. This layer has some protective effect against an erosive attack. However, when the pH is too low or when no fluoride is present these protecting effects are replaced by direct softening of the tooth surface. Xerostomia or oral dryness can occur as a consequence of medication such as tranquilizers, anti-histamines, anti-emetics and anti-parkinsonian medicaments or of salivary gland dysfunction e.g. due to radiotherapy of the oral cavity and the head and neck region. Above all, these patients should be aware of the potential demineralization effects of oral hygiene products with low pH and high titratable acids. Acetyl salicylic acid taken regularly in the form of multiple chewable tablets or in the form of headache powder as well chewing hydrochloric acids tablets for treatment of stomach disorders can cause erosion. There is most probably no direct association between asthmatic drugs and erosion on the population level. Consumers, patients and health professionals should be aware of the potential of tooth damage not only by oral hygiene products and salivary substitutes but also by chewable and effervescent tablets. Additionally, it can be assumed that patients suffering from xerostomia should be aware of the potential effects of oral hygiene products with low pH and high titratable acids.

  19. Effect of Short-Chain Fatty Acids and Soil Atmosphere on Tylenchorhynchus spp.

    PubMed Central

    McElderry, Claire F.; Browning, Marsha; Amador, José A.

    2005-01-01

    Short-chain fatty acids can be produced under anaerobic conditions by fermentative soil microbes and have nematicidal properties. We evaluated the effects of butyric and propionic acids on death and recovery of stunt nematodes (Tylenchorhynchus spp.), a common parasite of turfgrass. Nematodes in a sand-soil mix (80:20) were treated with butyric or propionic acid and incubated under air or N₂ for 7 days at 25 °C. Amendment of soil with 0.1 and 1.0 µmol (8.8 and 88 µg) butyric acid/g soil or 1.0 µmol (74 µg) propionic acid/g soil resulted in the death of all nematodes. The composition of the soil atmosphere had no effect on the nematicidal activity of the acids. Addition of hydrochloric acid to adjust soil pH to 4.4 and 3.5 resulted in nematode mortality relative to controls (41% to 86%) but to a lesser degree than short-chain fatty acids at the same pH. Nematodes did not recover after a 28-day period following addition of 10 µmol butyric acid/g soil under air or N₂. Carbon mineralization decreased during this period, whereas levels of inorganic N and microbial biomass-N remained constant. Short-chain fatty acids appear to be effective in killing Tylenchorhynchus spp. independent of atmospheric composition. Nematode mortality appears to be a function of the type and concentration of fatty acid and soil pH. PMID:19262845

  20. Esophageal blood flow in the cat. Normal distribution and effects of acid perfusion

    SciTech Connect

    Hollwarth, M.E.; Smith, M.; Kvietys, P.R.; Granger, D.N.

    1986-03-01

    The radioactive microsphere technique was used to estimate blood flow to different regions of the esophagus and to adjacent regions of the stomach before and after perfusion of the esophagus with hydrochloric acid (pH 1.5) for 5 min. Under resting conditions total blood flow, as well as blood flow to the mucosal-submucosal layer and the muscular layer, to both sphincters was significantly higher than to the esophageal body. Blood flow to the adjacent regions of the stomach was significantly higher than esophageal blood flow. Acid perfusion resulted in a large increase in total blood flow in both sphincters and the lower esophageal body. Gastric blood flow was not altered by acid perfusion. The esophageal hyperemia resulted primarily from an increase in blood flow to the muscular layer; mucosal-submucosal blood flow was increased only in the lower esophageal sphincter. The present study indicates that short periods (5 min) of gastroesophageal reflux may increase esophageal blood flow.

  1. Asymptotic Representation of the Temperature Field in Injection Stages During the Cyclic Acidizing of the Formation

    NASA Astrophysics Data System (ADS)

    Filippov, A. I.; Akhmetova, O. V.; Koval‧skii, A. A.; Kabirov, I. F.

    2016-11-01

    The authors have obtained an asymptotic solution to the problem on the temperature fi eld appearing during the injection of a chemically active solvent into a layered inhomogeneous orthotropic formation with account taken of temperature disturbances due to the preceding technological processes. This makes it possible to use the obtained solution for calculations under the conditions of multiple cyclic action. The sources of temperature disturbances are the liberation of heat due to the chemical reaction and the change in the temperature of the acid solution injected into the formation. Therefore, the obtained solution also covers the range of thermal-acidizing processes. The implemented method of construction of the solution is an extension of an asymptotic method accurate in the mean, which has been proposed by the authors as applied to the problems with nonzero initial conditions. The results of calculations of space-time temperature distributions under the conditions of hydrochloric acid treatment of carbonaceous formations have been given.

  2. A New Green Ionic Liquid-Based Corrosion Inhibitor for Steel in Acidic Environments.

    PubMed

    Atta, Ayman M; El-Mahdy, Gamal A; Al-Lohedan, Hamad A; Ezzat, Abdel Rahman O

    2015-06-17

    This work examines the use of new hydrophobic ionic liquid derivatives, namely octadecylammonium tosylate (ODA-TS) and oleylammonium tosylate (OA-TS) for corrosion protection of steel in 1 M hydrochloric acid solution. Their chemical structures were determined from NMR analyses. The surface activity characteristics of the prepared ODA-TS and OA-TS were evaluated from conductance, surface tension and contact angle measurements. The data indicate the presence of a double bond in the chemical structure of OA-TS modified its surface activity parameters. Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) measurements, scanning electron microscope (SEM), Energy dispersive X-rays (EDX) analysis and contact angle measurements were utilized to investigate the corrosion protection performance of ODA-TS and OA-TS on steel in acidic solution. The OA-TS and ODA-TS compounds showed good protection performance in acidic chloride solution due to formation of an inhibitive film on the steel surface.

  3. Oxalic acid degradation by a novel fungal oxalate oxidase from Abortiporus biennis.

    PubMed

    Grąz, Marcin; Rachwał, Kamila; Zan, Radosław; Jarosz-Wilkołazka, Anna

    2016-01-01

    Oxalate oxidase was identified in mycelial extracts of a basidiomycete Abortiporus biennis strain. Intracellular enzyme activity was detected only after prior lowering of the pH value of the fungal cultures by using oxalic or hydrochloric acids. This enzyme was purified using size exclusion chromatography (Sephadex G-25) and ion-exchange chromatography (DEAE-Sepharose). This enzyme exhibited optimum activity at pH 2 when incubated at 40°C, and the optimum temperature was established at 60°C. Among the tested organic acids, this enzyme exhibited specificity only towards oxalic acid. Molecular mass was calculated as 58 kDa. The values of Km for oxalate and Vmax for the enzyme reaction were 0.015 M and 30 mmol min(-1), respectively.

  4. Chemical force mapping of phosphate and carbon on acid-modified tapioca starch surface.

    PubMed

    Wuttisela, Karntarat; Triampo, Wannapong; Triampo, Darapond

    2009-01-01

    Surface chemical microstructure of hydrochloric acid hydrolyzed tapioca starch producing different amylose:amylopectin (Am:Ap) ratios were studied with scanning chemical force microscopy (CFM). The chemical force probes were functionalized of two types with -OH (phosphate specific) and -CH3 (carbon specific). Lateral force trace-minus-retrace (TMR) images from -OH and -CH3 probes revealed changes in the phosphate domains and the carbon backbone for the varying acid hydrolyzed tapioca starch compared to that of the native tapioca starch. Scanning electron micrographs (SEM) showed different degree of the granule surface disruption before and after hydrolysis. The exterior structures of the acid hydrolyzed starch granules were chemically investigated with CFM to study the relationships of the surface molecular structures and the Am:Ap ratios.

  5. Theoretical stusy of the reaction between 2,2',4' - trihydroxyazobenzene-5-sulfonic acid and zirconium

    USGS Publications Warehouse

    Fletcher, Mary H.

    1960-01-01

    Zirconium reacts with 2,2',4'-trihydroxyazobenzene-5-sulfonic acid in acid solutions to Form two complexes in which the ratios of dye to zirconium are 1 to 1 and 2 to 1. Both complexes are true chelates, with zirconium acting as a bridge between the two orthohydroxy dye groups. Apparent equilibrium constants for the reactions to form each of the complexes are determined. The reactions are used as a basis for the determination of the active component in the dye and a graphical method for the determination of reagent purity is described. Four absorption spectra covering the wave length region from 350 to 750 mu are given, which completely define the color system associated with the reactions in solutions where the hydrochloric acid concentration ranges from 0.0064N to about 7N.

  6. Low positive end-expiratory pressure does not exacerbate nebulized-acid lung injury in dogs.

    PubMed

    Pellett, Andrew A; Welsh, David A; deBoisblanc, Bennett P; Lipscomb, Gary; Johnson, Royce W; Lord, Kevin C; Levitzky, Michael G

    2005-03-01

    It is not clear if low end-expiratory pressures contribute to ventilator-induced lung injury in large animals. We sought to determine whether ventilation with a low level of positive end-expiratory pressure (PEEP) worsens preexisting permeability lung injury in dogs. Lung injury was initiated in 20 mongrel dogs by ventilating with nebulized 3N hydrochloric acid until a lower inflection point (LIP) appeared on the respiratory system pressure-volume loop. One group of 10 dogs was then ventilated for 4 hours with PEEP set below the LIP (low PEEP), whereas the remaining group of dogs was ventilated for the same time period with similar tidal volumes but with PEEP set above the LIP (high PEEP). We found histologic evidence of reduced alveolar volumes in the low-PEEP animals. However, there were no differences in neutrophil infiltration, lung lobe weights, pulmonary capillary hemorrhage or congestion, or arterial endothelin-1 concentration between the 2 protocol groups. In conclusion, we were unable to demonstrate that ventilation with PEEP set below the LIP exacerbates hydrochloric acid-induced lung injury in dogs.

  7. Detection of rare RNA sequences by single-enzyme in situ reverse transcription-polymerase chain reaction. High-resolution analyses of interleukin-6 mRNA in paraffin sections of lymph nodes.

    PubMed Central

    Peters, J.; Krams, M.; Wacker, H. H.; Carstens, A.; Weisner, D.; Hamann, K.; Menke, M.; Harms, D.; Parwaresch, R.

    1997-01-01

    To study the distribution pattern of interleukin-6 (IL-6)-producing cells in normal human lymph nodes, we applied the in situ reverse transcription-polymerase chain reaction technique. We describe a new modification of this technique for monitoring small amounts of specific nucleotide sequences in conventional paraffin sections. This technique differs in at least two respects from those described earlier. The two decisive steps are: 1) the reverse transcription of mRNA and the subsequent amplification of cDNA by polymerase chain reaction are performed by a new single enzyme capable of both reaction types in one and the same medium without buffer exchange; and 2) for the specific detection of the amplified cDNA, a modified version of the primed in situ labeling technique was used. The technique, carried out on normal human lymph nodes, traces a low load of IL-6 mRNA in fibroblasts, endothelial cells, and a minor population of T lymphocytes in the pulp region. High levels of expression were encountered in about 20% of perisinusoidal pulp macrophages. In addition, moderate activity was detectable in sinus lining cells. Because no major activity was found in the germinal centers of the lymphoid B follicles and in the T zone, it is suggested that the plasma cell differentiation ensuing from primary and secondary B-cell immunization is mainly effected by the sinus lining cells as well as perifollicular and perisinusoidal pulp macrophages capable of producing high amounts of IL-6. Images Figure 1 Figure 2 Figure 3 PMID:9033263

  8. Synthesis, crystal structure and characterization of new 12H hexagonal perovskite-related oxides Ba 6M2Na 2X2O 17 ( M=Ru, Nb, Ta, Sb; X=V, Cr, Mn, P, As)

    NASA Astrophysics Data System (ADS)

    Quarez, Eric; Abraham, Francis; Mentré, Olivier

    2003-11-01

    The new Ba 6Ru 2Na 2X2O 17 ( X=V, Mn) compounds have been prepared by electrosynthesis in molten NaOH and their crystal structures have been refined from single crystals X-ray diffraction, space group P6 3/ mmc, Z=2, for X=V: a =5.8506(1) Å, c =29.6241(4) Å, R1=4.76%, for X=Mn : a =5.8323(1) Å, c =29.5299(3) Å, R1=3.48%. The crystal structure is a 12H-type perovskite with a ( c' cchcc) 2 stacking sequence of [BaO 3] c, [BaO 3] h and [BaO 2] c' layers. The tridimensional edifice is formed by blocks of Ru 2O 9 dimers that share corners with NaO 6 octahedra. These blocks sandwich double sheets of X5+O 4 tetrahedra. Several isotypic Ba 6M5+2Na 2X5+2O 17 materials ( X=V, Cr, Mn, P, As) and ( M=Ru, Nb, Ta, Sb) have been prepared by solid state reaction and characterized by Rietveld analysis. The magnetic and electric properties have been investigated and show besides the Ru 5+2O 9 typical intradimer antiferromagnetic couplings, discrepancies of both χ and ρ versus T at 50 and 100 K for Ba 6Ru 2Na 2X2O 17 ( X=V, As). In this work, a review of the identified Ru-hexagonal perovskite materials is also reported in order to overview the wide variety of possibilities in the field of new compounds synthesis.

  9. Effect of osmotic, alkaline, acid or thermal stresses on the growth and inhibition of Listeria monocytogenes.

    PubMed

    Vasseur, C; Baverel, L; Hébraud, M; Labadie, J

    1999-03-01

    Five strains of Listeria monocytogenes (a, b, c, d and e) isolated from industrial plants have been subjected to different osmotic, alkaline, acid or thermal stresses. The effects of these treatments on lag-phase (L) and growth rate (mu) of cells in mid-log phase have been followed using an automated optical density monitoring system. Increasing the osmotic pressure by the addition of different amounts of NaCl increased the lag phase and decreased the growth rate. The same phenomena were observed after decreasing the pH of the medium to 5.8, 5.6 or 5.4 by addition of acetic, lactic or hydrochloric acids. The inhibitory effect was: acetic acid > lactic acid > hydrochloric acid. The addition of NaOH to attain pH values of 9.5, 10.0, 10.5 or 11.0 in the medium produced a dramatic increase of the lag phase at pH 10.5 and 11. Growth rates were also decreased while the maximal population increased with high pH values. These effects varied according to strains. Strains d and e were the most resistant to acidic and alkaline stresses, and e was the most affected by the addition of NaCl. A cold shock of 30 min at 0 degree C had limited effects on growth parameters. On the other hand, hyperthermal shocks (55 or 63 degrees C, 30 min) led to similar increased lag phases and to significant increases of the maximal population in all five strains.

  10. Enhanced conductivity of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film by acid treatment for indium tin oxide-free organic solar cells

    NASA Astrophysics Data System (ADS)

    Lin, Chun-Chiao; Huang, Chih-Kuo; Hung, Yu-Chieh; Chang, Mei-Ying

    2016-08-01

    An acid treatment is used in the enhancement of the conductivity of the conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) thin film, which is often used as the anode in organic solar cells. There are three types of acid treatment for PEDOT:PSS thin film: hydrochloric, sulfuric, and phosphoric acid treatments. In this study, we examine and compare these three ways with each other for differences in conductivity. Hydrochloric acid results in the highest conductivity enhancement, from 0.3 to 1109 S/cm. We also discuss the optical transmittance, conductivity, surface roughness, surface morphology, and stability, as well as the factors that can influence device efficiency. The devices are fabricated using an acid-treated PEDOT:PSS thin film as the anode. The highest power conversion efficiency was 1.32%, which is a large improvement over that of the unmodified organic solar cell (0.21%). It is comparable to that obtained when using indium tin oxide (ITO) as an electrode, ca. 1.46%.

  11. Selection of suitable mineral acid and its concentration for biphasic dilute acid hydrolysis of the sodium dithionite delignified Prosopis juliflora to hydrolyze maximum holocellulose.

    PubMed

    Naseeruddin, Shaik; Desai, Suseelendra; Venkateswar Rao, L

    2016-02-01

    Two grams of delignified substrate at 10% (w/v) level was subjected to biphasic dilute acid hydrolysis using phosphoric acid, hydrochloric acid and sulfuric acid separately at 110 °C for 10 min in phase-I and 121 °C for 15 min in phase-II. Combinations of acid concentrations in two phases were varied for maximum holocellulose hydrolysis with release of fewer inhibitors, to select the suitable acid and its concentration. Among three acids, sulfuric acid in combination of 1 & 2% (v/v) hydrolyzed maximum holocellulose of 25.44±0.44% releasing 0.51±0.02 g/L of phenolics and 0.12±0.002 g/L of furans, respectively. Further, hydrolysis of delignified substrate using selected acid by varying reaction time and temperature hydrolyzed 55.58±1.78% of holocellulose releasing 2.11±0.07 g/L and 1.37±0.03 g/L of phenolics and furans, respectively at conditions of 110 °C for 45 min in phase-I & 121 °C for 60 min in phase-II.

  12. The acid solvent experimental studies on gelatin producing by utilizing snapper fishes scales waste (Lutjanus camphecanus sp.)

    NASA Astrophysics Data System (ADS)

    Faradiella, Hanandyta; Ningsih, Putri Dewi Fatwa; Triastuti, Warlinda Eka

    2017-03-01

    Had done research processing scales red snapper (Lutjanjus campechanus sp.) into gelatin by process of maseration a solution of citric acid, acetate acid, hydrochloric acid, and phosphoric acid an then continued with hydrolysis process. Concentration of solvent used 5% (% v/v) for 3 and 6 days. Gelatin produces then were analyzed fourier transform infrared spectroscopy (FTIR), proximate analysis include yield and the water content, analysis of physical-chemist properties include analysis viscosity and pH, organoleptic test (color, texture, odor). Analyst ftir results showed the presence of a cluster functions 0-H, C-H, C=0, N-H and C-C aromatis similar to those of spectra that are found on commercial gelatin. Gelatin best results obtained maseration on with phosphoricacid 5% viscosity of gelatin 3,91 cP, the water content 2,569%, pH 6,98 and yield 11,7448%.

  13. Microenvironmental pH measurement during sodium naproxenate dissolution in acidic medium by UV/vis imaging.

    PubMed

    Ostergaard, Jesper; Jensen, Henrik; Larsen, Susan W; Larsen, Claus; Lenke, Jim

    2014-11-01

    Variable dissolution from sodium salts of drugs containing a carboxylic acid group after passing the acidic environment of the stomach may affect oral bioavailability. The aim of the present proof of concept study was to investigate pH effects in relation to the dissolution of sodium naproxenate in 0.01M hydrochloric acid. For this purpose a UV/vis imaging-based approach capable of measuring microenvironmental pH in the vicinity of the solid drug compact as well as monitoring drug dissolution was developed. Using a pH indicating dye real-time spatially resolved measurement of pH was achieved. Sodium naproxenate, can significantly alter the local pH of the dissolution medium, is eventually neutralized and precipitates as the acidic species naproxen. The developed approach is considered useful for detailed studies of pH dependent dissolution phenomena in dissolution testing.

  14. Free amino acids analysis by liquid chromatography with tandem mass spectrometry in several botanicals with antioxidant character.

    PubMed

    Moldoveanu, Serban C; Zhu, Jeff; Qian, Nancy

    2015-07-01

    A novel method based on liquid chromatography with tandem mass spectrometry for the analysis of 19 amino acids in plant materials is described. For the analysis, the plant material is extracted with 0.1 N hydrochloric acid with internal standards present in the extraction solution. The filtered extracts are injected using no clean-up into the liquid chromatographic system coupled with a triple-quadrupole tandem mass spectrometer with an electrospray ionization source. The analytes are separated using ion pair chromatography on a reversed-phase column. The detection is performed in multiple-reaction monitoring positive-ion mode. Quantitation is obtained using calibrations. The validated procedure has been applied for the analysis of amino acids in 18 samples of plant material including botanicals with antioxidant character. The analysis requires 16 min separation time, has excellent precision and accuracy allowing amino acid analysis in a wide range of concentrations.

  15. Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids.

    PubMed

    Dinda, Srikanta; Patwardhan, Anand V; Goud, Vaibhav V; Pradhan, Narayan C

    2008-06-01

    The kinetics of epoxidation of cottonseed oil by peroxyacetic acid generated in situ from hydrogen peroxide and glacial acetic acid in the presence of liquid inorganic acid catalysts were studied. It was possible to obtain up to 78% relative conversion to oxirane with very less oxirane cleavage by in situ technique. The rate constants for sulphuric acid catalysed epoxidation of cottonseed oil were in the range 0.39-5.4 x 10(-6)L mol(-1)s(-1) and the activation energy was found to be 11.7 kcal mol(-1). Some thermodynamic parameters such as enthalpy, entropy, and free energy of activation were determined to be of 11.0 kcal mol(-1), -51.4 cal mol(-1)K(-1) and 28.1 kcal mol(-1), respectively. The order of effectiveness of catalysts was found to be sulphuric acid>phosphoric acid>nitric acid>hydrochloric acid. Acetic acid was found to be superior to formic acid for the in situ cottonseed oil epoxidation.

  16. Novel technology for sewage sludge utilization: preparation of amino acids chelated trace elements (AACTE) fertilizer.

    PubMed

    Liu, Yangsheng; Kong, Sifang; Li, Yaqiong; Zeng, Hui

    2009-11-15

    This study developed a novel technology for sewage sludge utilization. The bacteria proteins in the sewage sludge were extracted to produce the amino acid chelated trace elements (AACTE) fertilizer by virtue of several chemical processes. Firstly, the sewage sludge was hydrolyzed under hot hydrochloric acid solution to obtain protein solution. The effects of hydrolysis temperature, reaction time and pH on the extraction ratio of protein from the sewage sludge were investigated. Secondly, the protein solution was further hydrolyzed into amino acids under hot acid condition. The effects of the HCl dosage, hydrolysis temperature and reaction time on the yields of amino acids were investigated in detail. Thirdly, the raw amino acids solution was purified by activated carbon decolorization and glacial acetic acid dissolution. Finally, the purified amino acids were used to produce the AACTE fertilizer by chelating with trace elements. Results showed that, under optimum hydrolysis conditions, 78.5% of protein was extracted from the sewage sludge and the amino acids yield was 10-13 g per 100g of dry sludge. The AACTE fertilizer produced was in accordance with China Standard for Amino Acids Foliar Fertilizer. This novel technology is more environmentally friendly compared with the conventional sludge treatments.

  17. Arginine and lysine decarboxylases and the acid tolerance response of Salmonella Typhimurium.

    PubMed

    Alvarez-Ordóñez, Avelino; Fernández, Ana; Bernardo, Ana; López, Mercedes

    2010-01-01

    Salmonella Typhimurium CECT 443 inactivation at pH 2.5 in Mineral Medium (MM) and MM supplemented with 0.01% (w/v) arginine, lysine or glutamic acid was studied using stationary-phase cells grown in buffered BHI pH 7.0 (non-acid adapted cells) and acidified BHI up to pH 4.5 with acetic, citric, lactic and hydrochloric acids (acid adapted cells). In all cases, acid adapted cells, with D-values ranging from 23.34 to 86.90 min, showed a significantly higher acid resistance than non-acid adapted cells, with D-values between 8.90 and 10.29 min. Whereas the conditions used for acid adaptation did not exert a significant effect on the acid resistance of the S. Typhimurium CECT 443 resulting cells, the inclusion of lysine and arginine in the challenge medium protected them against acid inactivation, reaching D-values of about 2 and 3 times higher, respectively, than those found in MM or MM supplemented with glutamic acid. None of these three amino acids significantly modified the acid resistance of non-acid adapted cells. The relative expression level of adiA (encoding the arginine decarboxylase), adiY (encoding the transcriptional activator of adiA), cadA (encoding the lysine decarboxylase) and cadB (encoding the lysine/cadaverine transport protein) was examined by quantitative PCR. Acid adapted cells showed higher relative expression levels for both systems, arginine decarboxylase and lysine decarboxylase, which demonstrates that the induction of specialized pH-homeostatic systems plays an important role in S. Typhimurium CECT 443 protection against acid stress. However, the increased acid resistance showed by acid adapted cells challenged in MM arginine or lysine free suggests the existence of other microbial survival strategies.

  18. Crystal structures and high-temperature phase-transitions in SrNdMRuO{sub 6} (M=Zn,Co,Mg,Ni) new double perovskites studied by symmetry-mode analysis

    SciTech Connect

    Iturbe-Zabalo, E.; Larranaga, A.; Cuello, G.J.

    2013-02-15

    Crystal structures of SrNdZnRuO{sub 6}, SrNdCoRuO{sub 6}, SrNdMgRuO{sub 6} and SrNdNiRuO{sub 6} double perovskites have been studied by X-ray, synchrotron radiation and neutron powder diffraction method, at different temperatures, and using the symmetry-mode analysis. All compounds adopt the monoclinic space group P2{sub 1}/n at room-temperature, and contain a completely ordered array of the tilted MO{sub 6} and RuO{sub 6} octahedra, whereas Sr/Nd cations are completely disordered. The analysis of the structures in terms of symmetry-adapted modes of the parent phase allows the identification of the modes responsible for the phase-transition. The high-temperature study (300-1250 K) has shown that the compounds present a temperature induced structural phase-transition: P2{sub 1}/n{yields}P4{sub 2}/n{yields}Fm3{sup Macron }m. - Graphical abstract: Representation of the dominant distortion modes of the symmetry mode decomposition of the room-temperature (P2{sub 1}/n), intermediate (P4{sub 2}/n) and cubic (Fm-3m) phase SrNdMRuO{sub 6} (M=Zn,Co,Mg,Ni), with respect to the parent phase Fm-3m. The dominant distortion modes are: in the monoclinic phase-GM{sub 4}{sup +} (blue arrow), X{sub 3}{sup +} (green arrow) and X{sub 5}{sup +} acting on A-site cations (red arrow); in the tetragonal phase-GM{sub 4}{sup +} (pink arrow), X{sub 3}{sup +} (light blue arrow) and X{sub 5}{sup +} acting on A-site cations (brown arrow). Highlights: Black-Right-Pointing-Pointer Structural study of four ruthenate double perovskites. Black-Right-Pointing-Pointer Room-temperature structural determination using symmetry-mode procedure. Black-Right-Pointing-Pointer Determination of temperature induced structural phase-transitions. Black-Right-Pointing-Pointer Symmetry adapted-mode analysis.

  19. Cholesterol reduces the effects of dihydroxy bile acids and fatty acids on water and solute transport in the human jejunum.

    PubMed Central

    Broor, S L; Slota, T; Ammon, H V

    1980-01-01

    Jejunal perfusion studies were performed in 16 healthy volunteers to test the hypothesis that intraluminal cholesterol can mitigate the fluid secretion induced by dihydroxy bile acids and fatty acids. Fluid secretion in the presence of 5 mM taurodeoxycholate was somewhat reduced by 4 mM mono-olein which was used for the solubilization of cholesterol. Addition of 0.8 mM cholesterol reduced fluid secretion further (P less than 0.05). Fluid secretion induced by 4 mM oleic acid was changed to net absorption in a linear fashion with increasing cholesterol concentration in the perfusion solutions. 1 mM cholesterol reduced fluid secretion induced by 6 mM oleic acid (P less than 0.005), but had no effect on fluid secretion induced by 6 mM linolenic acid. Glucose absorption was generally affected in a similar manner as water transport. In vitro, 1 mM cholesterol reduced monomer activity of 6 mM oleic acid to 72.3 +/- 0.9% of control and that of linolenic acid to 81.1 +/- 1.7% of control. Although statistically significant (P less than 0.001), the difference in the effects of cholesterol on monomer activities of the two fatty acids was rather small and it is unlikely that changes in monomer concentration of fatty acids and bile acids account for the protective effect of cholesterol. The in vivo observations point to a new physiological role for biliary cholesterol: the modification of the response of the small intestine to the effects of dihydroxy bile acids and fatty acids. PMID:7358850

  20. Ultrastructural observation of the acid-base resistant zone of all-in-one adhesives using three different acid-base challenges.

    PubMed

    Tsujimoto, Miho; Nikaido, Toru; Inoue, Go; Sadr, Alireza; Tagami, Junji

    2010-11-01

    The aim of this study was to analyze the ultrastructure of the dentin-adhesive interface using two all-in-one adhesive systems (Clearfil Tri-S Bond, TB; Tokuyama Bond Force, BF) after different acid-base challenges. Three solutions were used as acidic solutions for the acid-base challenges: a demineralizing solution (DS), a phosphoric acid solution (PA), and a hydrochloric acid solution (HCl). After the acid-base challenges, the bonded interfaces were examined by scanning electron microscopy. Thickness of the acid-base resistant zone (ABRZ) created in PA and HCl was thinner than in DS for both adhesive systems. For BF adhesive, an eroded area was observed beneath the ABRZ after immersion in PA and HCl, but not in DS. Conversely for TB adhesive, the eroded area was observed only after immersion in PA. In conclusion, although the ABRZ was observed for both all-in-one adhesive systems, its morphological features were influenced by the ingredients of both the adhesive material and acidic solution.

  1. Aspartic acid

    MedlinePlus

    ... also called asparaginic acid. Aspartic acid helps every cell in the body work. It plays a role in: Hormone production and release Normal nervous system function Plant sources of aspartic acid include: Legumes such as ...

  2. Folic Acid

    MedlinePlus

    Folic acid is a B vitamin. It helps the body make healthy new cells. Everyone needs folic acid. For women who may get pregnant, it is really important. Getting enough folic acid before and during pregnancy can prevent major birth ...

  3. Folic Acid

    MedlinePlus

    Folic acid is used to treat or prevent folic acid deficiency. It is a B-complex vitamin needed by ... Folic acid comes in tablets. It usually is taken once a day. Follow the directions on your prescription label ...

  4. Acid-catalyzed autohydrolysis of wheat straw to improve sugar recovery.

    PubMed

    Ertas, Murat; Han, Qiang; Jameel, Hasan

    2014-10-01

    A comparison study of autohydrolysis and acid-catalyzed autohydrolysis of wheat straw was performed to understand the impact of acid addition on overall sugar recovery. Autohydrolysis combined with refining is capable of achieving sugar recoveries in the mid 70s. If the addition of a small amount of acid is capable of increasing the sugar recovery even higher it may be economically attractive. Acetic, sulfuric, hydrochloric and sulfurous acids were selected for acid-catalyzed autohydrolysis pretreatments. Autohydrolysis with no acid at 190 °C showed the highest total sugar in the prehydrolyzate. Enzymatic hydrolysis was performed for all the post-treated solids with and without refining at enzyme loadings of 4 and 10 FPU/g for 96 h. Acid-catalyzed autohydrolysis at 190 °C with sulfurous acid showed the highest total sugar recovery of 81.2% at 4 FPU/g enzyme charge compared with 64.3% at 190 °C autohydrolysis without acid.

  5. 77 FR 24700 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-25

    ... Request; NESHAP for Steel Pickling, HCl Process Facilities and Hydrochloric Acid Regeneration Plants... Hydrochloric Acid Regeneration Plants (Renewal). ICR Numbers: EPA ICR Number 1821.07, OMB Control Number 2060... that pickle steel using hydrochloric acid or regenerate hydrochloric acid, and are major sources or...

  6. Dealloying of Cu-Based Metallic Glasses in Acidic Solutions: Products and Energy Storage Applications

    PubMed Central

    Wang, Zhifeng; Liu, Jiangyun; Qin, Chunling; Yu, Hui; Xia, Xingchuan; Wang, Chaoyang; Zhang, Yanshan; Hu, Qingfeng; Zhao, Weimin

    2015-01-01

    Dealloying, a famous ancient etching technique, was used to produce nanoporous metals decades ago. With the development of dealloying techniques and theories, various interesting dealloying products including nanoporous metals/alloys, metal oxides and composites, which exhibit excellent catalytic, optical and sensing performance, have been developed in recent years. As a result, the research on dealloying products is of great importance for developing new materials with superior physical and chemical properties. In this paper, typical dealloying products from Cu-based metallic glasses after dealloying in hydrofluoric acid and hydrochloric acid solutions are summarized. Several potential application fields of these dealloying products are discussed. A promising application of nanoporous Cu (NPC) and NPC-contained composites related to the energy storage field is introduced. It is expected that more promising dealloying products could be developed for practical energy storage applications. PMID:28347030

  7. The citric acid-modified, enzyme-resistant dextrin from potato starch as a potential prebiotic.

    PubMed

    Sliżewska, Katarzyna

    2013-01-01

    In the present study, enzyme-resistant dextrin, prepared by heating of potato starch in the presence of hydrochloric (0.1% dsb) and citric (0.1% dsb) acid at 130ºC for 3 h (CA-dextrin), was tested as a source of carbon for probiotic lactobacilli and bifidobacteria cultured with intestinal bacteria isolated from feces of three healthy 70-year old volunteers. The dynamics of growth of bacterial monocultures in broth containing citric acid (CA)-modified dextrin were estimated. It was also investigated whether lactobacilli and bifidobacteria cultured with intestinal bacteria in the presence of resistant dextrin would be able to dominate the intestinal isolates. Prebiotic fermentation of resistant dextrin was analyzed using prebiotic index (PI). In co-cultures of intestinal and probiotic bacteria, the environment was found to be dominated by the probiotic strains of Bifidobacterium and Lactobacillus, which is a beneficial effect.

  8. Acid Rain.

    ERIC Educational Resources Information Center

    Openshaw, Peter

    1987-01-01

    Provides some background information on acid deposition. Includes a historical perspective, describes some effects of acid precipitation, and discusses acid rain in the United Kingdom. Contains several experiments that deal with the effects of acid rain on water quality and soil. (TW)

  9. Iodometric microdetermination of boric acid and borax separately or in a mixture.

    PubMed

    Saxena, R; Verma, R M

    1983-05-01

    Boric acid is determined by first treating it with mannitol and then with solid potassium iodate and potassium iodide. The iodine liberated is titrated with thiosulphate. Borax is determined by reacting it with a known and excessive volume of hydrochloric acid and determining the surplus acid by iodometry. From the amount of acid consumed, the quantity of borax is calculated. Mixtures of borax and boric acid are analysed by combination of the two methods. Borax is determined first, then the mannitol procedure is applied to a second sample and the total boric acid (original plus that produced in the borax-HCl reaction) is determined iodometrically. The boric acid content of the sample is obtained by difference. The procedures can be used for determining 0.01-0.1 mmole of these substances with an average deviation of 0.1-0.4%. The end-points obtained are sharper than those for potentiometric acid-base titrations. Furthermore, the procedures are applicable at much lower concentrations.

  10. Determination of trace amount of oxalic acid with zirconium(IV)-(DBS-arsenazo) by spectrophotometry

    NASA Astrophysics Data System (ADS)

    Zhai, Qing-Zhou

    2008-11-01

    A novel method is proposed for the determination of trace amount of oxalic acid in the present article. In 1.0 M hydrochloric acid medium, oxalic acid can react with the zirconium(IV) in Zr(IV)-(DBS-arsenazo) complex and replaces the DBS-arsenazo to produce a hyperchromic effect at 520 nm. The hyperchromic degree is proportional to the concentration of the oxalic acid added over a defined range. Based on this property, a new method for the spectrophotometric determination of trace oxalic acid was developed. Beer's law is held over the concentration range of 9.0 × 10 -6 to 5.0 × 10 -4 M for oxalic acid with a correlation coefficient of 0.9995. The apparent molar absorptivity of the method is ɛ520 nm = 1.16 × 10 3 L mol -1 cm -1 and the detection limit for oxalic acid is 0.815 μg/mL. The developed method was directly applied to the determination of oxalic acid in tomato samples with satisfactory results.

  11. Antimicrobial activity of acid-hydrolyzed Citrus unshiu peel extract in milk.

    PubMed

    Min, Keun Young; Kim, Hyun Jung; Lee, Kyoung Ah; Kim, Kee-Tae; Paik, Hyun-Dong

    2014-01-01

    Citrus fruit (Citrus unshiu) peels were extracted with hot water and then acid-hydrolyzed using hydrochloric acid. Antimicrobial activities of acid-hydrolyzed Citrus unshiu peel extract were evaluated against pathogenic bacteria, including Bacillus cereus, Staphylococcus aureus, and Listeria monocytogenes. Antilisterial effect was also determined by adding extracts at 1, 2, and 4% to whole, low-fat, and skim milk. The cell numbers of B. cereus, Staph. aureus, and L. monocytogenes cultures treated with acid-hydrolyzed extract for 12h at 35°C were reduced from about 8log cfu/mL to <1log cfu/mL. Bacillus cereus was more sensitive to acid-hydrolyzed Citrus unshiu peel extract than were the other bacteria. The addition of 4% acid-hydrolyzed Citrus unshiu extracts to all types of milk inhibited the growth of L. monocytogenes within 1d of storage at 4°C. The results indicated that Citrus unshiu peel extracts, after acid hydrolysis, effectively inhibited the growth of pathogenic bacteria. These findings indicate that acid hydrolysis of Citrus unshiu peel facilitates its use as a natural antimicrobial agent for food products.

  12. Determination of trace amount of oxalic acid with zirconium(IV)-(DBS-arsenazo) by spectrophotometry.

    PubMed

    Zhai, Qing-Zhou

    2008-11-15

    A novel method is proposed for the determination of trace amount of oxalic acid in the present article. In 1.0M hydrochloric acid medium, oxalic acid can react with the zirconium(IV) in Zr(IV)-(DBS-arsenazo) complex and replaces the DBS-arsenazo to produce a hyperchromic effect at 520 nm. The hyperchromic degree is proportional to the concentration of the oxalic acid added over a defined range. Based on this property, a new method for the spectrophotometric determination of trace oxalic acid was developed. Beer's law is held over the concentration range of 9.0 x 10(-6) to 5.0 x 10(-4)M for oxalic acid with a correlation coefficient of 0.9995. The apparent molar absorptivity of the method is epsilon520 nm = 1.16 x 10(3)L mol(-1)cm(-1) and the detection limit for oxalic acid is 0.815 microg/mL. The developed method was directly applied to the determination of oxalic acid in tomato samples with satisfactory results.

  13. Patterns of effective permeability of leaf cuticles to acids

    SciTech Connect

    Hauser, H.D.; Walters, K.D.; Berg, V.S. )

    1993-01-01

    Plants in the field are frequently exposed to anthropogenic acid precipitation with pH values of 4 and below. For the acid to directly affect leaf tissues, it must pass through the leaf cuticle, but little is known about the permeability of cuticles to protons, of about the effect of different anions on this permeability. We investigated the movement of protons through isolated astomatous leaf cuticles of grapefruit (Citrus x paradisi Macfady.), rough lemon (Citrus limon [L.] Burm. fils cv Ponderosa), and pear (Pyrus communis L.) using hydrochloric, sulfuric, and nitric acids. Cuticles were enzymically isolated from leaves and placed in a diffusion apparatus with pH 4 acid on the morphological outer surface of the cuticle and degassed distilled water on the inner surface. Changes in pH of the solution on the inner surface were used to determine rates of effective permeability of the cuticles to the protons of these acids. Most cuticles exhibited an initial low permeability, lasting hours to days, then after a short transition displayed a significant higher permeability, which persisted until equilibrium was approached. The change in effective permeability appears to be reversible. Effective permeabilities were higher for sulfuric acid than for the others. A model of the movement of protons through the cuticle is presented, proposing that dissociated acid groups in channels within the cutin are first protonated by the acid, accounting for the low initial effective permeability; then protons pass freely through the channels, resulting in a higher effective permeability. 26 refs., 6 figs., 2 tabs.

  14. Impact of acid adaptation on attachment of Listeria monocytogenes to stainless steel during long-term incubation under low or moderate temperature conditions and on subsequent recalcitrance of attached cells to lethal acid treatments.

    PubMed

    Giaouris, Efstathios; Chorianopoulos, Nikos; Nychas, George-John

    2014-02-03

    This study aimed to evaluate the possible impact of acid adaptation of Listeria monocytogenes cells on their attachment to stainless steel (SS) during long-term incubation under either low or moderate temperature conditions and on the subsequent recalcitrance of attached cells to lethal acid treatments. Initially, nonadapted or acid-adapted stationary phase L. monocytogenes cells were used to inoculate (ca. 10⁸ CFU/ml) brain-heart infusion (BHI) broth in test tubes containing vertically placed SS coupons. Incubation was carried out at either 5 or 30 °C for up to 15 days, under static conditions. On the 5th, 10th and 15th days of incubation, attached cells were subjected to lethal acid treatments by exposing them, for either 6 or 60 min, to pH 2, adjusted with either hydrochloric or lactic acid. Following the acid treatments, remaining viable cells were detached (through strong vortexing with glass beads) and enumerated by agar plating, and also indirectly quantified by conductance measurements via their metabolic activity. Results obtained from both quantification techniques, employed here in parallel, revealed that although the numbers of attached cells for nonadapted and acid-adapted ones were similar, the latter were found to present significantly (p<0.05) increased recalcitrance to all the acid treatments for both incubation temperatures and all sampling days. In addition and regardless of acid adaptation, when long (60 min) acid treatments were applied, conductance measurements revealed that the weak organic lactic acid exhibited significantly (p<0.05) stronger antilisterial activity compared to the strong inorganic hydrochloric acid (at the same pH value of 2). To conclude, present results show that acid adaptation of L. monocytogenes cells during their planktonic growth is conserved even after 15 days of incubation under both low and moderate temperature conditions, and results in the increased recalcitrance of their sessile population to otherwise lethal

  15. Antioxidative Peptides Derived from Enzyme Hydrolysis of Bone Collagen after Microwave Assisted Acid Pre-Treatment and Nitrogen Protection

    PubMed Central

    Lin, Yun-Jian; Le, Guo-Wei; Wang, Jie-Yun; Li, Ya-Xin; Shi, Yong-Hui; Sun, Jin

    2010-01-01

    This study focused on the preparation method of antioxidant peptides by enzymatic hydrolysis of bone collagen after microwave assisted acid pre-treatment and nitrogen protection. Phosphoric acid showed the highest ability of hydrolysis among the four other acids tested (hydrochloric acid, sulfuric acid and/or citric acid). The highest degree of hydrolysis (DH) was 9.5% using 4 mol/L phosphoric acid with a ratio of 1:6 under a microwave intensity of 510 W for 240 s. Neutral proteinase gave higher DH among the four protease tested (Acid protease, neutral protease, Alcalase and papain), with an optimum condition of: (1) ratio of enzyme and substrate, 4760 U/g; (2) concentration of substrate, 4%; (3) reaction temperature, 55 °C and (4) pH 7.0. At 4 h, DH increased significantly (P < 0.01) under nitrogen protection compared with normal microwave assisted acid pre-treatment hydrolysis conditions. The antioxidant ability of the hydrolysate increased and reached its maximum value at 3 h; however DH decreased dramatically after 3 h. Microwave assisted acid pre-treatment and nitrogen protection could be a quick preparatory method for hydrolyzing bone collagen. PMID:21151439

  16. Amino acids in the Martian meteorite Nakhla.

    PubMed

    Glavin, D P; Bada, J L; Brinton, K L; McDonald, G D

    1999-08-03

    A suite of protein and nonprotein amino acids were detected with high-performance liquid chromatography in the water- and acid-soluble components of an interior fragment of the Martian meteorite Nakhla, which fell in Egypt in 1911. Aspartic and glutamic acids, glycine, alanine, beta-alanine, and gamma-amino-n-butyric acid (gamma-ABA) were the most abundant amino acids detected and were found primarily in the 6 M HCl-hydrolyzed, hot water extract. The concentrations ranged from 20 to 330 parts per billion of bulk meteorite. The amino acid distribution in Nakhla, including the D/L ratios (values range from <0.1 to 0.5), is similar to what is found in bacterially degraded organic matter. The amino acids in Nakhla appear to be derived from terrestrial organic matter that infiltrated the meteorite soon after its fall to Earth, although it is possible that some of the amino acids are endogenous to the meteorite. The rapid amino acid contamination of Martian meteorites after direct exposure to the terrestrial environment has important implications for Mars sample-return missions and the curation of the samples from the time of their delivery to Earth.

  17. Amino acids in the Martian meteorite Nakhla

    NASA Technical Reports Server (NTRS)

    Glavin, D. P.; Bada, J. L.; Brinton, K. L.; McDonald, G. D.

    1999-01-01

    A suite of protein and nonprotein amino acids were detected with high-performance liquid chromatography in the water- and acid-soluble components of an interior fragment of the Martian meteorite Nakhla, which fell in Egypt in 1911. Aspartic and glutamic acids, glycine, alanine, beta-alanine, and gamma-amino-n-butyric acid (gamma-ABA) were the most abundant amino acids detected and were found primarily in the 6 M HCl-hydrolyzed, hot water extract. The concentrations ranged from 20 to 330 parts per billion of bulk meteorite. The amino acid distribution in Nakhla, including the D/L ratios (values range from <0.1 to 0.5), is similar to what is found in bacterially degraded organic matter. The amino acids in Nakhla appear to be derived from terrestrial organic matter that infiltrated the meteorite soon after its fall to Earth, although it is possible that some of the amino acids are endogenous to the meteorite. The rapid amino acid contamination of Martian meteorites after direct exposure to the terrestrial environment has important implications for Mars sample-return missions and the curation of the samples from the time of their delivery to Earth.

  18. Amino Acids in the Martian Meteorite Nakhla

    NASA Astrophysics Data System (ADS)

    Glavin, Daniel P.; Bada, Jeffrey L.; Brinton, Karen L. F.; McDonald, Gene D.

    1999-08-01

    A suite of protein and nonprotein amino acids were detected with high-performance liquid chromatography in the water- and acid-soluble components of an interior fragment of the Martian meteorite Nakhla, which fell in Egypt in 1911. Aspartic and glutamic acids, glycine, alanine, β -alanine, and γ -amino-n-butyric acid (γ -ABA) were the most abundant amino acids detected and were found primarily in the 6 M HCl-hydrolyzed, hot water extract. The concentrations ranged from 20 to 330 parts per billion of bulk meteorite. The amino acid distribution in Nakhla, including the D/L ratios (values range from <0.1 to 0.5), is similar to what is found in bacterially degraded organic matter. The amino acids in Nakhla appear to be derived from terrestrial organic matter that infiltrated the meteorite soon after its fall to Earth, although it is possible that some of the amino acids are endogenous to the meteorite. The rapid amino acid contamination of Martian meteorites after direct exposure to the terrestrial environment has important implications for Mars sample-return missions and the curation of the samples from the time of their delivery to Earth.

  19. Syntheses and magnetostructural investigations on Kuratowski-type homo- and heteropentanuclear coordination compounds [MZn4Cl4(L)6] (M(II) = Zn, Fe, Co, Ni, or Cu; L = 5,6-dimethyl-1,2,3-benzotriazolate) represented by the nonplanar K(3,3) graph.

    PubMed

    Biswas, Shyam; Tonigold, Markus; Speldrich, Manfred; Kögerler, Paul; Weil, Matthias; Volkmer, Dirk

    2010-08-16

    Homo- and heteropentanuclear coordination compounds [MZn(4)Cl(4)(L)(6)] (M(II) = Zn, Fe, Co, Ni, or Cu; L = 5,6-dimethyl-1,2,3-benzotriazolate) were prepared containing mu(3)-bridging N-donor ligands (1,2,3-benzotriazolate), which are structurally related to the fundamental secondary building unit of Metal-organic Framework Ulm University-4 (MFU-4). The unique topology of these T(d)-symmetrical compounds is characterized by the nonplanar K(3,3) graph, introduced into graph theory by the mathematician Casimir Kuratowski in 1930. The following "Kuratowski-type" compounds were investigated by single-crystal X-ray structure analysis: [MZn(4)Cl(4)(Me(2)bta)(6)].2DMF (M(II) = Zn, Fe, Co, and Cu; DMF = N,N'-dimethylformamide) and [MZn(4)Cl(4)(Me(2)bta)(6)].2C(6)H(5)Br (M(II) = Co and Ni; C(6)H(5)Br = bromobenzene). The mu(3)-bridging benzotriazolate ligands span the edges of an imaginary tetrahedron, in the center of which a redox-active octahedrally coordinated M(II) ion is placed. Four Zn(II) ions are located at the corners of the coordination units. Each Zn center is bound to a monodentate Cl(-) anion and three N-donor atoms stemming from different benzotriazolate ligands. The fact that open-shell redox-active M(II) ions can be introduced selectively into the central octahedral coordination sites is unambiguously proven by a combination of magnetic measurements, UV-vis spectroscopy, and energy-dispersive X-ray and inductively coupled plasma atomic emission spectrometry analysis. The phase purity of all compounds was checked by powder X-ray diffractometry, IR spectroscopy, and elemental analysis. The electronic spectra and magnetic properties of the compounds are in complete agreement with their structures determined from single-crystal data. Thermogravimetric analysis shows that all compounds possess a high thermal stability up to 673 K. The pentanuclear compounds retain their structural integrity in solution, as evidenced by time-of-flight mass spectrometry analysis

  20. FURNACE INJECTION OF ALKALINE SORBENTS FOR SULFURIC ACID CONTROL

    SciTech Connect

    Gary M. Blythe

    2000-12-01

    A test program is being sponsored by the US Department of Energy (DOE), EPRI, FirstEnergy, and TVA to investigate furnace injection of alkaline sorbents as a means of reducing sulfuric acid concentrations in the flue gas from coal-fired boilers. This test program is being conducted at the FirstEnergy Bruce Mansfield Plant (BMP), although later testing will be conducted at a TVA plant. A sorbent injection test was conducted the week of April 18, 2000. The test was the first of several short-term (one- to two-week duration) tests to investigate the effectiveness of various alkaline sorbents for sulfuric acid control and the effects of these sorbents on boiler equipment performance. This first short-term test investigated the effect of injecting dry dolomite powder (CaCO{sub 3} {center_dot} MgCO{sub 3}), a mineral similar to limestone, into the furnace of Unit 2. During the test program, various analytical techniques were used to assess the effects of sorbent injection. These primarily included sampling with the controlled condensation system (CCS) for determining flue gas SO{sub 3} content and an acid dew-point (ADP) meter for determining the sulfuric acid dew point (and, indirectly, the concentration of sulfuric acid) of the flue gas. EPA Reference Method 26a was used for determining hydrochloric acid (HCl) and hydrofluoric acid (HF), as well and chlorine (Cl{sub 2}) and fluorine (F{sub 2}) concentrations in the flue gas. Fly ash resistivity was measured using a Southern Research Institute (SRI) point-to-plane resistivity probe, and unburned carbon in fly ash was determined by loss on ignition (LOI). Coal samples were also collected and analyzed for a variety of parameters. Finally, visual observations were made of boiler furnace and convective pass surfaces prior to and during sorbent injection.

  1. The search for and identification of amino acids, nucleobases and nucleosides in samples returned from Mars

    NASA Technical Reports Server (NTRS)

    Gehrke, Charles W.; Ponnamperuma, Cyril; Kuo, Kenneth C.; Stalling, David L.; Zumwalt, Robert W.

    1989-01-01

    An investigation of the returned Mars samples for biologically important organic compounds, with emphasis on amino acid, the puring and pyrimidine bases, and nucleosides is proposed. These studies would be conducted on subsurface samples obtained by drilling past the surface oxidizing layer with emphasis on samples containing the larges quantities of organic carbon as determined by the rover gas chromatographic mass spectrometer (GCMS). Extraction of these molecules from the returned samples will be performed using the hydrothermal extraction technique described by Cheng and Ponnamperuma. More rigorous extraction methods will be developed and evaluated. For analysis of the extract for free amino acids or amino acids present in a bound or peptidic form, aliquots will be analyzed by capillary GCMS both before and after hydrolysis with 6N hydrochloric acid. Establishment of the presence of amino acids would then lead to the next logical step which would be the use of chiral stationary gas chromatography phases to determine the enatiomeic composition of the amino acids present, and thus potentially establish their biotic or abiotic origin. Confirmational analyses for amino acids would include ion-exchange and reversed-phase liquid chromatographic analysis. For analyses of the returned Mars samples for nucleobases and nucleosides, affinity and reversed-phase liquid chromatography would be utilized. This technology coupled with scanning UV detection for identification, presents a powerful tool for nucleobase and nucleoside analysis. Mass spectrometric analysis of these compounds would confirm their presence in samples returned form Mars.

  2. One-Pot synthesis of phosphorylated mesoporous carbon heterogeneous catalysts with tailored surface acidity

    SciTech Connect

    Fulvio, Pasquale F; Mahurin, Shannon Mark; Mayes, Richard T; Bauer, Christopher; Wang, Xiqing; Veith, Gabriel M; Dai, Sheng

    2012-01-01

    Soft-templated phosphorylated mesoporous carbons with homogeneous distributions of phosphate groups were prepared by a 'one-pot' synthesis method using mixtures of phosphoric acid with hydrochloric, or nitric acids in the presence of Pluronic F127 triblock copolymer. Adjusting the various ratios of phosphoric acid used in these mixtures resulted in carbons with distinct adsorption, structural and surface acidity properties. The pore size distributions (PSDs) from nitrogen adsorption at -196 C showed that mesoporous carbons exhibit specific surface areas as high as 551 m{sup 2}/g and mesopores as large as 13 nm. Both structural ordering of the mesopores and the final phosphate contents were strongly dependent on the ratios of H{sub 3}PO{sub 4} in the synthesis gels, as shown by transmission electron microscopy (TEM), X-ray photoelectron (XPS) and energy dispersive X-ray spectroscopy (EDS). The number of surface acid sites determined from temperature programmed desorption of ammonia (NH{sub 3}-TPD) were in the range of 0.3-1.5 mmol/g while the active surface areas are estimated to comprise 5-54% of the total surface areas. Finally, the conversion temperatures for the isopropanol dehydration were lowered by as much as 100 C by transitioning from the least acidic to the most acidic catalysts surface.

  3. A modified acid digestion procedure for extraction of tungsten from soil.

    PubMed

    Bednar, A J; Jones, W T; Chappell, M A; Johnson, D R; Ringelberg, D B

    2010-01-15

    Interest in tungsten occurrence and geochemistry is increasing due to increased use of tungsten compounds and its unknown biochemical effects. Tungsten has a complex geochemistry, existing in most environmental matrices as the soluble and mobile tungstate anion, as well as poly- and heteropolytungstates. Because the geochemistry of tungsten is substantially different than most trace metals, including the formation of insoluble species under acidic conditions, it is not extracted from soil matrices using standard acid digestion procedures. Therefore, the current work describes a modification to a commonly used acid digestion procedure to facilitate quantification of tungsten in soil matrices. Traditional soil digestion procedures, using nitric and hydrochloric acids with hydrogen peroxide yield <1 up to 50% recovery on soil matrix spike samples, whereas the modified method reported here, which includes the addition of phosphoric acid, yields spike recoveries in the 76-98% range. Comparison of the standard and modified digestion procedures on National Institute of Standards and Technology Standard Reference Materials yielded significantly improved tungsten recoveries for the phosphoric acid modified method. The modified method also produces comparable results for other acid extractable metals as the standard methods, and therefore can be used simultaneously for tungsten and other metals of interest.

  4. A study of marine pollution caused by the release of metals into seawater following acid spills.

    PubMed

    Cabon, Jean-Yves; Giamarchi, Philippe; Le Floch, Stephane

    2010-07-01

    This study examined the potential metal pollution induced by the accidental spill of different acids into seawater. The acids sink to the bottom according to their densities and subsequently react with marine sediments. The acids selected for this study were acetic, hydrochloric, nitric, sulfuric, and phosphoric acids; the metallic elements selected were Cr, Cu, Fe, Mn, Pb and Zn. The sediment was collected in Brest Harbour. The percentages of metals released from this sediment in the presence of various concentrations of acids in seawater were important; concentrations of approximately 7 mg L(-1) for Mn and 60 mg L(-1) for Zn were observed under our experimental conditions. We also examined the rate of release of these metals from the sediment into the seawater in the presence of the different acids and under different experimental conditions. We found that most of the metallic elements were released from the sediments into the seawater during the first fifteen minutes of exposure. After this time, a high degree of pollution was induced if acids leached into seawater were not rapidly diluted.

  5. Acid-base catalysis of N-[(morpholine)methylene]daunorubicin.

    PubMed

    Krause, Anna; Jelińska, Anna; Cielecka-Piontek, Judyta; Klawitter, Maria; Zalewski, Przemysław; Oszczapowicz, Irena; Wąsowska, Małgorzata

    2012-08-01

    The stability of N-[(morpholine)methylene]-daunorubicin hydrochloride (MMD) was investigated in the pH range 0.44-13.54, at 313, 308, 303 and 298 K. The degradation of MMD as a result of hydrolysis is a pseudo-first-order reaction described by the following equation: ln c = ln c(0) - k(obs)• t. In the solutions of hydrochloric acid, sodium hydroxide, borate, acetate and phosphate buffers, k(obs) = k(pH) because general acid-base catalysis was not observed. Specific acid-base catalysis of MMD comprises the following reactions: hydrolysis of the protonated molecules of MMD catalyzed by hydrogen ions (k(1)) and spontaneous hydrolysis of MMD molecules other than the protonated ones (k(2)) under the influence of water. The total rate of the reaction is equal to the sum of partial reactions: k(pH) = k(1) • a(H)+ • f(1) + k(2) • f(2) where: k(1) is the second-order rate constant (mol(-1) l s(-1)) of the specific hydrogen ion-catalyzed degradation of the protonated molecules of MMD; k(2) is the pseudo-first-order rate constant (s(-1)) of the water-catalyzed degradation of MMD molecules other than the protonated ones, f(1) - f(2) are fractions of the compound. MMD is the most stable at approx. pH 2.5.

  6. Dephosphorization of Steelmaking Slag by Leaching with Acidic Aqueous Solution

    NASA Astrophysics Data System (ADS)

    Qiao, Yong; Diao, Jiang; Liu, Xuan; Li, Xiaosa; Zhang, Tao; Xie, Bing

    2016-09-01

    In the present paper, dephosphorization of steelmaking slag by leaching with acidic aqueous solution composed of citric acid, sodium hydroxide, hydrochloric acid and ion-exchanged water was investigated. The buffer solution of C6H8O7-NaOH-HCl system prevented changes in the pH values. Kinetic parameters including leaching temperature, slag particle size and pH values of the solution were optimized. The results showed that temperature has no obvious effect on the dissolution ratio of phosphorus. However, it has a significant effect on the dissolution ratio of iron. The dephosphorization rate increases with the decrease of slag particle size and the pH value of the solution. Over 90% of the phosphorus can be dissolved in the solution while the corresponding leaching ratio of iron was only 30% below the optimal condition. Leaching kinetics of dephosphorization follow the unreacted shrinking core model with a rate controlled step by the solid diffusion layer, the corresponding apparent activation energy being 1.233 kJ mol-1. A semiempirical kinetic equation was established. After leaching, most of the nC2S-C3P solid solution in the steelmaking slag was selectively dissolved in the aqueous solution and the iron content in the solid residue was correspondingly enriched.

  7. Obeticholic Acid

    MedlinePlus

    Obeticholic acid is used alone or in combination with ursodiol (Actigall, Urso) to treat primary biliary cholangitis (PBC; a ... were not treated successfully with ursodiol alone. Obeticholic acid is in a class of medications called farnesoid ...

  8. Aminocaproic Acid

    MedlinePlus

    Aminocaproic acid is used to control bleeding that occurs when blood clots are broken down too quickly. This type ... the baby is ready to be born). Aminocaproic acid is also used to control bleeding in the ...

  9. Acid mucopolysaccharides

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003368.htm Acid mucopolysaccharides To use the sharing features on this page, please enable JavaScript. Acid mucopolysaccharides is a test that measures the amount ...

  10. Aristolochic Acids

    MedlinePlus

    ... Sciences NIH-HHS www.niehs.nih.gov Aristolochic Acids Key Points Report on Carcinogens Status Known to be human carcinogens Aristolochia Clematitis Aristolochic Acids n Known human carcinogens n Found in certain ...

  11. Ascorbic Acid

    MedlinePlus

    Ascorbic acid is used to prevent and treat scurvy, a disease caused by a lack of vitamin C in ... Ascorbic acid comes in extended-release (long-acting) capsules and tablets, lozenges, syrup, chewable tablets, and liquid drops to ...

  12. Ethacrynic Acid

    MedlinePlus

    Ethacrynic acid, a 'water pill,' is used to treat swelling and fluid retention caused by various medical problems. It ... Ethacrynic acid comes as a tablet to take by mouth. It is usually taken once or twice a day ...

  13. Amino acids

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002222.htm Amino acids To use the sharing features on this page, please enable JavaScript. Amino acids are organic compounds that combine to form proteins . ...

  14. Acid extraction of molybdenum, nickel and cobalt from mineral sludge generated by rainfall water at a metal recycling plant.

    PubMed

    Vemic, M; Bordas, F; Guibaud, G; Comte, S; Joussein, E; Lens, P N L; Van Hullebusch, E D

    2016-01-01

    This study investigated the leaching yields of Mo, Ni and Co from a mineral sludge of a metal recycling plant generated by rainfalls. The investigated mineral sludge had a complex heterogeneous composition, consisting of particles of settled soil combined with metal-bearing particles (produced by catalysts, metallic oxides and battery recycling). The leaching potential of different leaching reagents (stand-alone strong acids (HNO3 (68%), H2SO4 (98%) and HCl (36%)) and acid mixtures (aqua regia (nitric + hydrochloric (1:3)), nitric + sulphuric (1:1) and nitric + sulphuric + hydrochloric (2:1:1)) was investigated at changing operational parameters (solid-liquid (S/L) ratio, leaching time and temperature), in order to select the leaching reagent which achieves the highest metal leaching yields. Sulphuric acid (98% H2SO4) was found to be the leachant with the highest metal leaching potential. The optimal leaching conditions were a three-stage successive leaching at 80 °C with a leaching time of 2 h and S/L ratio of 0.25 g L(-1). Under these conditions, the achieved mineral sludge sample leaching yields were 85.5%, 40.5% and 93.8% for Mo, Ni and Co, respectively. The higher metal leaching potential of H2SO4 in comparison with the other strong acids/acid mixtures is attributed to the fact that H2SO4 is a diacidic compound, thus it has more H(+) ions, resulting in its stronger oxidizing power and corrosiveness.

  15. Valproic Acid

    MedlinePlus

    Valproic acid is used alone or with other medications to treat certain types of seizures. Valproic acid is also used to treat mania (episodes of ... to relieve headaches that have already begun. Valproic acid is in a class of medications called anticonvulsants. ...

  16. Crystal structure of Ba2(La0.727Ba0.182M0.091)MO6 (M = Nb, Sb, Bi): symmetry nuance identified in photoluminescence and IR spectroscopy studies.

    PubMed

    Phatak, Rohan; Gupta, Santosh K; Maheshwari, Priya; Das, Amitabh; Sali, Sanjay K

    2017-01-31

    A one-third lanthanum deficiency was created in Ba2LaM(5+)O6 compounds (LaM compounds) to form Ba2La2/3M(5+)O5.5 compounds (La2/3M compounds) for M = Nb, Sb, and Bi. The compounds were prepared by a gel-combustion method using citric acid as a fuel. All the compounds were characterized by powder X-ray diffraction (XRD). The XRD analysis showed that the space group of the La2/3M compounds remains the same for the Bi and Sb samples when compared to the reported LaM compounds, except for the Nb sample. La2/3Nb and La2/3Sb adopt a rhombohedral structure with the space group R3[combining macron], whereas La2/3Bi adopts a monoclinic structure with the space group I2/m. As the positron annihilation spectroscopy (PALS) technique is sensitive to cation deficiency, it was used to detect the presence of cation vacancies in the samples, which are formed due to the decrease in the lanthanum concentration. The PALS analyses indicated that the absence of cation deficiency in the La2/3M compounds is similar to that observed in the LaM compound. Thus, the crystal structure of the La2/3M compound was modeled, such that the cation deficiency at the La site is filled by Ba(2+) and M(5+) ions, and the crystal structure formula is given as Ba2(La0.727Ba0.182M0.091)MO6. This model was confirmed by Rietveld refinement of the XRD data. The emission spectra of Eu(3+) showed a strong dependence on its local site symmetry in the host material, in which it is being doped and this can be used as a spectroscopic probe for detecting any differences in the symmetry. Comparison of the local symmetry around La(3+) cation was studied using photoluminescence (PL) by doping 2 atom% Eu(3+) in LaM and La2/3M compounds. Infrared spectroscopy (IRS) analyses were also carried out for LaM and La2/3M compounds. There was complete agreement between the PL and IRS results and they were also in concordance with the predicted crystal structure model. Interestingly in these La2/3M compounds, the equilibrium

  17. Metabolism of adrenic acid to vasodilatory 1alpha,1beta-dihomo-epoxyeicosatrienoic acids by bovine coronary arteries.

    PubMed

    Yi, Xiu-Yu; Gauthier, Kathryn M; Cui, Lijie; Nithipatikom, Kasem; Falck, John R; Campbell, William B

    2007-05-01

    Adrenic acid (docosatetraenoic acid), an abundant fatty acid in the vasculature, is produced by a two-carbon chain elongation of arachidonic acid. Despite its abundance and similarity to arachidonic acid, little is known about its role in the regulation of vascular tone. Gas chromatography/mass spectrometric analysis of bovine coronary artery and endothelial cell lysates revealed arachidonic acid concentrations of 2.06 +/- 0.01 and 6.18 +/- 0.60 microg/mg protein and adrenic acid concentrations of 0.29 +/- 0.01 and 1.56 +/- 0.16 microg/mg protein, respectively. In bovine coronary arterial rings preconstricted with the thromboxane mimetic U-46619, adrenic acid (10(-9)-10(-5) M) induced concentration-related relaxations (maximal relaxation = 83 +/- 4%) that were similar to arachidonic acid relaxations. Adrenic acid relaxations were blocked by endothelium removal and the K(+) channel inhibitor, iberiotoxin (100 nM), and inhibited by the cyclooxygenase inhibitor, indomethacin (10 microM, maximal relaxation = 53 +/- 4%), and the cytochrome P-450 inhibitor, miconazole (10 microM, maximal relaxation = 52 +/- 5%). Reverse-phase HPLC and liquid chromatography/mass spectrometry isolated and identified numerous adrenic acid metabolites from coronary arteries including dihomo (DH)-epoxyeicosatrienoic acids (EETs) and DH-prostaglandins. DH-EET [16,17-, 13,14-, 10,11-, and 7,8- (10(-9)-10(-5) M)] induced similar concentration-related relaxations (maximal relaxations averaged 83 +/- 3%). Adrenic acid (10(-6) M) and DH-16,17-EET (10(-6) M) hyperpolarized coronary arterial smooth muscle. DH-16,17-EET (10(-8)-10(-6) M) activated iberiotoxin-sensitive, whole cell K(+) currents of isolated smooth muscle cells. Thus, in bovine coronary arteries, adrenic acid causes endothelium-dependent relaxations that are mediated by cyclooxygenase and cytochrome P-450 metabolites. The adrenic acid metabolite, DH-16,17-EET, activates smooth muscle K(+) channels to cause hyperpolarization and

  18. Fatty acids - trans fatty acids

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The data supporting a negative effect of dietary trans fatty acids on cardiovascular disease risk is consistent. The primary dietary sources of trans fatty acids include partially hydrogenated fat and rudiment fat. The adverse effect of trans fatty acids on plasma lipoprotein profiles is consisten...

  19. Effect of humic acid on sorption of technetium by alumina.

    PubMed

    Kumar, S; Rawat, N; Kar, A S; Tomar, B S; Manchanda, V K

    2011-09-15

    Sorption of technetium by alumina has been studied in absence as well as in presence of humic acid using (95)Tc(m) as a tracer. Measurements were carried out at fixed ionic strength (0.1M NaClO(4)) under varying pH (3-10) as well as redox (aerobic and reducing anaerobic) conditions. Under aerobic conditions, negligible sorption of technetium was observed onto alumina both in absence and in presence of humic acid. However, under reducing conditions (simulated with [Sn(II)] = 10(-6)M), presence of humic acid enhanced the sorption of technetium in the low pH region significantly and decreased at higher pH with respect to that in absence of humic acid. Linear additive as well as surface complexation modeling of Tc(IV) sorption in presence of humic acid indicated the predominant role of sorbed humic acid in deciding technetium sorption onto alumina.

  20. Distribution and enantiomeric composition of amino acids in the Murchison meteorite

    NASA Technical Reports Server (NTRS)

    Engel, M. H.; Nagy, B.

    1982-01-01

    Studies of the amino acid contents and enantiomeric compositions of a single stone from the Murchison meteorite are reported. Water-extracted and 6M HCl-extracted samples from the meteorite interior of meteorite fragments were analyzed by gas chromatography and combined gas chromatography-chemical ionization mass spectrometry. Examination of the D/L ratios of glutamic acid, aspartic acid, proline, leucine and alanine reveals those amino acids extractable by water to be partially racemized, whereas the acid-extracted amino acids were less racemized. The amino acid composition of the stone is similar to those previously reported, including the absence of serine, threonine, tyrosine phenylalanine and methionine and the presence of unusual amino acids including such as isovaline, alpha-aminoisobutyric acid and pseudoleucine. It is concluded that the most likely mechanism accounting for the occurrence of nonracemic amino acid mixtures in the Murchison meteorite is by extraterrestrial stereoselective synthesis or decomposition reactions.