Science.gov

Sample records for 7a frp box

  1. Infrared Scanning of FRP Composite Members

    NASA Astrophysics Data System (ADS)

    Halabe, U. B.; Bangalore, G.; GangaRao, H. V. S.; Klinkhachorn, P.

    2003-03-01

    Fiber Reinforced Polymer (FRP) composite is rapidly emerging as an alternative material for the infrastructure industry, and as a supplement to the conventional material such as steel, concrete, and timber. However, the long-term behavior of these materials has not been fully understood. In order to study the durability issues, it is important to develop a nondestructive evaluation (NDE) system for continuous monitoring of structural members built with FRP materials. This paper presents the results of an experimental study on delamination detection in FRP composite members using infrared thermography. Simulated delaminations of various sizes were inserted into several FRP box sections and deck sections during the pultrusion process to create subsurface defects. The defective specimens were then tested in the laboratory using infrared thermography to predict the location and planar extent of these subsurface delaminations. The infrared tests yielded good results, which indicate that the technique can be developed for long-term in-service monitoring of FRP structural members in the field environment.

  2. Final evaluation & test report for the standard waste box (docket 01-53-7A) type A packaging

    SciTech Connect

    KELLY, D L

    2001-10-15

    This report documents the U.S. Department of Transportation Specification 7A Type A compliance test and evaluation results of the Standard Waste Box. Testing and evaluation activities documented herein are on behalf of the U.S. Department of Energy-Headquarters, Office of Safety, Health and Security (EM-5), Germantown, Maryland. Duratek Federal Services, Inc., Northwest Operations performed an evaluation of the changes as documented herein under Docket 01-53-7A.

  3. Final evaluation & test report for the standard waste box (docket 01-53-7A) type A packaging

    SciTech Connect

    KELLY, D.L.

    2001-08-15

    This report documents the U.S. Department of Transportation Specification 7A Type A (DOT-7A) compliance test and evaluation results of the Standard Waste Box (SWB). Testing and evaluation activities documented herein are on behalf of the U.S. Department of Energy-Headquarters (DOE-HQ), Office of Safety, Health and Security (EM-5), Germantown, Maryland. Dwatek Federal Services, Inc., Northwest Operations (DFSNW) performed an evaluation of the changes as documented herein under Docket 01-53-7A.

  4. Intelligent FRP retrofits for critical civil infrastructures

    NASA Astrophysics Data System (ADS)

    Jiang, Guoliang; Peters, Kara

    2007-04-01

    In this paper, the concept, modeling and preliminary testing of an intelligent FRP retrofit with self-monitoring capabilities for critical civil infrastructures are presented. This intelligent system is based on an easy-to-apply configuration of FRP pre-preg tapes with multiple stacked unidirectional layers of piezoelectric or SMA actuators and integrated optical fiber sensors. This intelligent retrofit will be able to not only monitor conditions including bonding of the FRP to the structure and opening of concrete cracks, but also minimize the crack opening and retard the progression of further FRP debonding. Towards this end, a computationally efficient two-dimensional shear stress-transfer model based on a simplified shear lag analysis is developed, with consideration of the fact that the stress transfer between the FRP, actuator and sensor layers in the intelligent system is complex. The effectiveness of this model is demonstrated through one numerical benchmark problem and one typical FRP configuration, with comparison of each to full threedimensional finite element models. The agreement between the two formulations is shown to be further improved by adjustment of the assumed shape functions. A preliminary experiment is also presented in which pre-fabricated optical fiber ribbons are embedded into the FRP strengthening of a full-scale concrete beam. Results from static loading test of the FRP strengthened beam show the feasibility of this technique for the self-monitoring FRP retrofits.

  5. MYC protein inhibits transcription of the microRNA cluster MC-let-7a-1~let-7d via noncanonical E-box.

    PubMed

    Wang, Zifeng; Lin, Sheng; Li, Julia Jun; Xu, Zhenhua; Yao, Hong; Zhu, Xiao; Xie, Dan; Shen, Zan; Sze, Johnny; Li, Kui; Lu, Gang; Chan, Danny Tat-Ming; Poon, Wai Sang; Kung, Hsiang-fu; Lin, Marie Chia-mi

    2011-11-18

    The human microRNA cluster MC-let-7a-1∼let-7d, with three members let-7a-1, let-7f-1, and let-7d, is an important cluster of the let-7 family. These microRNAs play critical roles in regulating development and carcinogenesis. Therefore, precise control of MC-let-7a-1∼let-7d level is critical for cellular functions. In this study, we first showed that the expression of these three members was significantly reduced in human hepatocellular carcinoma HepG2 cells as compared with the immortalized human liver L02 cells. We demonstrated that the MC-let-7a-1∼let-7d cluster was encoded by a single polycistronic transcript driven by a 10-kb upstream promoter, with two MYC-binding sites. Importantly, MYC inhibited MC-let-7a-1∼let-7d promoter activity via binding to the noncanonical E-box 3 downstream of the transcription start sites, whereas it enhanced promoter activity by binding to the canonical E-box 2 upstream of the transcription start sites. We found that although the binding affinity of MYC to E-box 2 was stronger than E-box 3, the binding quantum of MYC to E-box 3 was significantly higher in cancerous HepG2 cells as compared with the noncancerous L02 cells. In addition, forced expression of let-7 could reverse the MYC-mediated cell proliferation. These findings suggested that in L02 cells with a low level of MYC, MYC binds mainly to E-box 2 to enhance MC-let-7a-1∼let-7d expression. However, in HepG2 cells with an elevated MYC, the extra MYC could bind to E-box 3 to suppress the transcription of MC-let-7a-1∼let-7d and thus enable HepG2 cells to maintain a high level of MYC and a low level of let-7 microRNAs simultaneously.

  6. The Nop5-L7A-fibrillarin RNP complex and a novel box C/D containing sRNA of Halobacterium salinarum NRC-1.

    PubMed

    Weisel, Jasmin; Wagner, Steffen; Klug, Gabriele

    2010-04-09

    RNA 2'O-methylation is a frequent modification of rRNA and tRNA and supposed to influence RNA folding and stability. Ribonucleoprotein (RNP) complexes, containing the proteins Nop5, L7A, fibrillarin, and a box C/D sRNA, are guided for 2'O-methylation by interactions of their RNA component with their target RNA. In vitro complex assembly was analyzed for several thermophilic Archaea but in vivo studies are rare, even unavailable for halophilic Archaea. To analyze the putative box C/D RNP complex in the extremely halophilic Halobacterium salinarum NRC-1 we performed pull-down analysis and identified the proteins Nop5, L7A, and fibrillarin and the tRNA(Trp) intron, as a typical box C/D sRNA of this RNP complex in vivo. We show for the first time a ribonucleolytic activity of the purified RNP complex proteins, as well as for the RNP complex containing pull-down fractions. Furthermore, we identified a novel RNA (OE4630R-3'sRNA) as part of the complex, containing the typical boxes C/D and C'/D' sequence motifs and being twice as abundant as the tRNA(Trp) intron. Copyright 2010 Elsevier Inc. All rights reserved.

  7. Research on Waste FRP Fiber Reinforced Adhesive Mortar

    NASA Astrophysics Data System (ADS)

    Feng, Y. C.; Zhao, F. Q.

    2017-01-01

    The use of FRP in industry results in large amount of waste FRP. If not treated properly, it will pollute the environment. In our study, waste FRP powder was used in mortar to substitute part of sand in mortar. The use of short waste FRP fibre can further increase the mechanical strength. The Waste FRP fibre reinforced adhesive mortar was prepared with the material proportioning: cement-sand ratio 1:2, polymer 8% (cement based ), waste FRP fibre 3% (based on the total solids ). The performance of the mortar conforms to JCT 547-2005 with excellent adhesive characteristics.

  8. Analytical modeling of concrete box beams reinforced by GFRP rebars

    SciTech Connect

    Zhao, Y.; Pang, S.S.

    1998-12-31

    An FRP rebar reinforced concrete box beam has been studied in this paper. Static analysis has been performed on the beams subjected to tension, bending, and torsion, based on a conceptual box beam structure. Linear vibration analysis has been conducted to predict the natural frequencies of the structures. Three dimensional finite element analysis has also been carried out to predict the stress, strain, deflection, and natural frequencies of the box beam structures. The results show that an FRP rebar deforms more compatibly with surrounding concrete than a steel rebar does. The results suggest that the concrete beams with FRP reinforcement are much more likely to be subject to compression failure (breakage of concrete on compression side) when compared to the box beams reinforced with steel rebars under the same loading conditions.

  9. Diabetic osteopenia by decreased β-catenin signaling is partly induced by epigenetic derepression of sFRP-4 gene.

    PubMed

    Mori, Kiyoshi; Kitazawa, Riko; Kondo, Takeshi; Mori, Michiko; Hamada, Yasuhiro; Nishida, Michiru; Minami, Yasuhiro; Haraguchi, Ryuma; Takahashi, Yutaka; Kitazawa, Sohei

    2014-01-01

    In diabetics, methylglyoxal (MG), a glucose-derived metabolite, plays a noxious role by inducing oxidative stress, which causes and exacerbates a series of complications including low-turnover osteoporosis. In the present study, while MG treatment of mouse bone marrow stroma-derived ST2 cells rapidly suppressed the expression of osteotrophic Wnt-targeted genes, including that of osteoprotegerin (OPG, a decoy receptor of the receptor activator of NF-kappaB ligand (RANKL)), it significantly enhanced that of secreted Frizzled-related protein 4 (sFRP-4, a soluble inhibitor of Wnts). On the assumption that upregulated sFRP-4 is a trigger that downregulates Wnt-related genes, we sought out the molecular mechanism whereby oxidative stress enhanced the sFRP-4 gene. Sodium bisulfite sequencing revealed that the sFRP-4 gene was highly methylated around the sFRP-4 gene basic promoter region, but was not altered by MG treatment. Electrophoretic gel motility shift assay showed that two continuous CpG loci located five bases upstream of the TATA-box were, when methylated, a target of methyl CpG binding protein 2 (MeCP2) that was sequestered upon induction of 8-hydroxy-2-deoxyguanosine, a biomarker of oxidative damage to DNA. These in vitro data suggest that MG-derived oxidative stress (not CpG demethylation) epigenetically and rapidly derepress sFRP-4 gene expression. We speculate that under persistent oxidative stress, as in diabetes and during aging, osteopenia and ultimately low-turnover osteoporosis become evident partly due to osteoblastic inactivation by suppressed Wnt signaling of mainly canonical pathways through the derepression of sFRP-4 gene expression.

  10. A Viscoelastic Constitutive Law For FRP Materials

    NASA Astrophysics Data System (ADS)

    Ascione, Luigi; Berardi, Valentino Paolo; D'Aponte, Anna

    2011-09-01

    The present study deals with the long-term behavior of fiber-reinforced polymer (FRP) materials in civil engineering. More specifically, the authors propose a mechanical model capable of predicting the viscoelastic behavior of FRP laminates in the field of linear viscoelasticity, starting from that of the matrix material and fiber. The model is closely connected with the low FRP stress levels in civil engineering applications. The model is based on a micromechanical approach which assumes that there is a perfect adhesion between the matrix and fiber. The long-term behavior of the phases is described through a four-parameter rheological law. A validation of the model has also been developed by matching the predicted behavior with an experimental one available in the literature.

  11. Simulation of the FRP Product

    NASA Astrophysics Data System (ADS)

    Paugam, Ronan; Wooster, Martin; Johnston, Joshua; Gastellu-Etchegorry, Jean-Philippe

    2014-05-01

    Among the different alternative of remote sensing technologies for estimating global fire carbon emission, the thermally-based measures of fire radiative power (FRP; and its temporal integration, fire radiative energy or FRE) has the potential to capture the spatial and temporal variability of fire occurrence. It was shown that a strong linear relationship exists between the total amount of thermal radiant energy emitted by a fire over its lifetime (the FRE) and the amount of fuel burned. Since all vegetation is 50(±5)% carbon, it is therefore in theory a potentially simple matter to measure the FRE and estimate the carbon release. In a fire inventory like the Global Fire Assimilation System (GFAS), the total carbon emission is derived from a gridded FRE product forced by the MODIS observation, using Ct = β x FRE x Ef, where β is a conversion factor initially estimated from small scale experiment as β=0.368 and later derived for different bio dome by comparison with the Global Fire Emission Database (GFED). The sensitivities of the above equation to (i) different types of fire activity (ie, flaming, smoldering, torching), (ii) sensor view angles or (iii) soot/smoke absorption have not yet been well studied. The investigation of these types of sensitivity, and of the information content of thermal IR observations of actively burning fires in general, is one of the primary subjects of this study. Our approach is based on a combination of observational work and simulations conducted via the linkage of different fire models and the 3D radiative transfer (RT) model DART operating in the thermal domain. The radiation properties of a fire as seen from above its plume (e.g. space/air borne sensor) depend on the temperature distribution, the gas concentration (mainly CO2, H2O), and the amount, shape, distribution and optical properties of the soot particles in the flame (where they are emitting) and in the cooling plume (where they are mainly absorbing). While gas and

  12. Solving FRP piping and ducting problems

    SciTech Connect

    Britt, F.

    1997-12-01

    This paper presents an analytical approach to the design and installation of FRP piping and duct systems that can be used by piping designers and engineers to prevent failures. Design, installation, testing, and start up procedures will be presented that have proven to provide safe and long lasting service. Procedures offered will insure the most cost effective system based on operational requirements.

  13. Big Box, Little Box.

    ERIC Educational Resources Information Center

    Texas Child Care, 2002

    2002-01-01

    This article presents activities for young children in child care settings using boxes of various sizes. Suggestions include making shape sorters and sensory boxes for infants and toddlers, and constructing personal collection boxes, book boxes, games, and playhouses for older children. (Author/KB)

  14. Tensile Characterization of FRP Rods for Reinforced Concrete Structures

    NASA Astrophysics Data System (ADS)

    Micelli, F.; Nanni, A.

    2003-07-01

    The application of FRP rods as an internal or external reinforcement in new or damaged concrete structures is based on the development of design equations that take into account the mechanical properties of FRP material systems.The measurement of mechanical characteristics of FRP requires a special anchoring and protocol, since it is well known that these characteristics depend on the direction and content of fibers. In this study, an effective tensile test method is described for the mechanical characterization of FRP rods. Twelve types of glass and carbon FRP specimens with different sizes and surface characteristics were tested to validate the procedure proposed. In all, 79 tensile tests were performed, and the results obtained are discussed in this paper. Recommendations are given for specimen preparation and test setup in order to facilitate the further investigation and standardization of the FRP rods used in civil engineering.

  15. Structural basis of the interaction between the putative adhesion-involved and iron-regulated FrpD and FrpC proteins of Neisseria meningitidis

    PubMed Central

    Sviridova, Ekaterina; Rezacova, Pavlina; Bondar, Alexey; Veverka, Vaclav; Novak, Petr; Schenk, Gundolf; Svergun, Dmitri I.; Kuta Smatanova, Ivana; Bumba, Ladislav

    2017-01-01

    The iron-regulated protein FrpD from Neisseria meningitidis is an outer membrane lipoprotein that interacts with very high affinity (Kd ~ 0.2 nM) with the N-terminal domain of FrpC, a Type I-secreted protein from the Repeat in ToXin (RTX) protein family. In the presence of Ca2+, FrpC undergoes Ca2+ -dependent protein trans-splicing that includes an autocatalytic cleavage of the Asp414-Pro415 peptide bond and formation of an Asp414-Lys isopeptide bond. Here, we report the high-resolution structure of FrpD and describe the structure-function relationships underlying the interaction between FrpD and FrpC1-414. We identified FrpD residues involved in FrpC1-414 binding, which enabled localization of FrpD within the low-resolution SAXS model of the FrpD-FrpC1-414 complex. Moreover, the trans-splicing activity of FrpC resulted in covalent linkage of the FrpC1-414 fragment to plasma membrane proteins of epithelial cells in vitro, suggesting that formation of the FrpD-FrpC1-414 complex may be involved in the interaction of meningococci with the host cell surface. PMID:28084396

  16. Bond of fiber reinforced plastic (FRP) rods to concrete

    SciTech Connect

    Al-Zahrani, M.M.; Nanni, A.; Al-Dulaijan, S.U.; Bakis, C.E.

    1996-11-01

    The bond behavior between FRP rods and concrete is one of the most important aspects to predicting the short- and long-term performance of FRP reinforced concrete structures including development and transfer length. In this research, the direct pull-out test was used to study the FRP/concrete bond behavior. This method allows measurement of the loaded- and free-end slip of the FRP rod and placement of a strain probe inside the rod to measure internal strain distribution in both axial and radial directions along the bonded length without affecting the FRP/concrete interface. Knowledge of strain distribution is necessary to study the load transfer mechanism between FRP rod and concrete. The scope of this paper include experimental results obtained with the direct pull-out test using 12.7 mm glass and carbon FRP rods with smooth and axisymmetrical deformed surfaces. The typical results are given as nominal bond and shear stress vs. free- and loaded-end slip. Experimental results obtained from strain probes used during pull-out tests are also presented as nominal bond and shear stress vs. strain. For smooth rods, friction is the main controlling factor. For deformed rods, bond tends to be controlled by strength and mechanical action of the axisymmetrical deformations rather than adhesion and friction. The strength of concrete appears to have no effect on the bond strength and failure mechanism of these particular machined FRP rods when concrete splitting is avoided.

  17. Magical Boxes

    ERIC Educational Resources Information Center

    Costello, Judith

    2005-01-01

    Students get excited when they realize that they can transform a flat sheet of paper into a box. By using different sizes of paper, they can make different sizes of boxes and put a box inside a box, inside a box. These magical boxes within boxes can contain unwanted emotions or special treasures. The project described in this article incorporates…

  18. Magical Boxes

    ERIC Educational Resources Information Center

    Costello, Judith

    2005-01-01

    Students get excited when they realize that they can transform a flat sheet of paper into a box. By using different sizes of paper, they can make different sizes of boxes and put a box inside a box, inside a box. These magical boxes within boxes can contain unwanted emotions or special treasures. The project described in this article incorporates…

  19. Long-term static testing of an FRP prototype highway structure

    NASA Astrophysics Data System (ADS)

    Lee, J.; Hollaway, L.; Thorne, A.; Head, P.

    In recent years it has become apparent that the labour and maintenance costs of highway structures fabricated from conventional constructional materials (i.e. steel and concrete) are rising, and therefore the whole life cost of these structures is being significantly affected. Highway structures manufactured from advanced composite materials provide a viable solution to reduce substantially both the labour and the maintenance costs, whilst providing structures that behave in accordance with the present British code of practice for highway structures. The principle objectives of the investigations were to undertake experimentally and to verify, where applicable, numerically the suitability of advanced fibre-reinforced polymer (FRP) composite materials manufactured in the form of box beams for use as highway structures. It was also important to research into any unique behaviour exhibited by the FRP structures while under test and to develop relevant theoretical models and formulae to characterize completely this behaviour. The composite box beam showed no signs of global deterioration and generally behaved as predicted; the short term stiffness of the beam measured at specific times during the test did not decrease to any extent. There was some local flexural cracking in the connectors at the position of the applied loads, but this can be eliminated by design. The creep and deflections of the beam at the end of the test were well within acceptable limits.

  20. Fabrication and experimentation of FRP helical spring

    NASA Astrophysics Data System (ADS)

    Ekanthappa, J.; Shiva Shankar, G. S.; Amith, B. M.; Gagan, M.

    2016-09-01

    In present scenario, the automobile industry sector is showing increased interest in reducing the unsprung weight of the automobile & hence increasing the fuel Efficiency. One of the feasible sub systems of a vehicle where weight reduction may be attempted is vehicle- suspension system. Usage of composite material is a proven way to lower the component weight without any compromise in strength. The composite materials are having high specific strength, more elastic strain energy storage capacity in comparison with those of steel. Therefore, helical coil spring made of steel is replaceable by composite cylindrical helical coil spring. This research aims at preparing a re-usable mandrel (mould) of Mild steel, developing a setup for fabrication, fabrication of FRP helical spring using continuous glass fibers and Epoxy Resin (Polymer). Experimentation has been conducted on fabricated FRP helical spring to determine its strength parameters & for failure analysis. It is found that spring stiffness (K) of Glass/Epoxy helical-spring is greater than steel-coil spring with reduced weight.

  1. Deformation Analysis of RC Ties Externally Strengthened with FRP Sheets

    NASA Astrophysics Data System (ADS)

    Gribniak, V.; Arnautov, A. K.; Kaklauskas, G.; Jakstaite, R.; Tamulenas, V.; Gudonis, E.

    2014-11-01

    The current study has two objectives: to validate the ability of the Atena finite-element software to estimate the deformations of reinforced concrete (RC) elements strengthened with fiber-reinforced polymer (FRP) sheets and to assess the effect of FRP-to-concrete bond strength on the results of numerical simulation. It is shown that the bond strength has to be selected according to the overall stiffness of the composite element. The numerical results found are corroborated experimentally by tensile tests of RC elements strengthened with basalt FRP sheets.

  2. Jeweled Boxes

    ERIC Educational Resources Information Center

    Coy, Mary

    2009-01-01

    While an empty cardboard box from a ream of copy paper may be the most coveted box among teachers in the author's school, for other people, brass boxes from India, Khokhlova lacquer boxes from Russia, and puzzle boxes from Japan are more the type that are collected and admired. Whether it is used for storage or decoration, a box can evoke a sense…

  3. Jeweled Boxes

    ERIC Educational Resources Information Center

    Coy, Mary

    2009-01-01

    While an empty cardboard box from a ream of copy paper may be the most coveted box among teachers in the author's school, for other people, brass boxes from India, Khokhlova lacquer boxes from Russia, and puzzle boxes from Japan are more the type that are collected and admired. Whether it is used for storage or decoration, a box can evoke a sense…

  4. Loss of MYC and E-box3 binding contributes to defective MYC-mediated transcriptional suppression of human MC-let-7a-1~let-7d in glioblastoma.

    PubMed

    Wang, Zifeng; Lin, Sheng; Zhang, Ji; Xu, Zhenhua; Xiang, Yu; Yao, Hong; Ge, Lei; Xie, Dan; Kung, Hsiang-Fu; Lu, Gang; Poon, Wai Sang; Liu, Quentin; Lin, Marie Chia-Mi

    2016-08-30

    Previously, we reported that MYC oncoprotein down-regulates the transcription of human MC-let-7a-1~let-7d microRNA cluster in hepatocarcinoma (HCC). Surprisingly, in silico analysis indicated that let-7 miRNA expression levels are not reduced in glioblastoma (GBM). Here we investigated the molecular basis of this differential expression. Using human GBM U87 and U251 cells, we first demonstrated that forced over-expression of MYC indeed could not down-regulate the expression of human MC-let-7a-1~let-7d microRNA cluster in GBM. Furthermore, analysis of MC-let-7a-1~let-7d promoter in GBM indicated that MYC failed to inhibit the promoter activity. Pearson's correlation and Linear Regression analysis using the expression data from GSE55092 (HCC) and GSE4290 (GBM) demonstrated a converse relationship of MC-let-7a-1~let-7d and MYC only in HCC but not in GBM. To understand the underlying mechanisms, we examined whether MYC could bind to the non-canonical E-box 3 located in the promoter of MC-let-7a-1~let-7d. Results from both chromatin immune-precipitation (ChIP) and super-shift assays clearly demonstrated the loss of MYC and E-box 3 binding in GBM, suggesting for the first time that a defective MYC and E-box3 binding in GBM is responsible for the differential MYC mediated transcriptional inhibition of MC-let-7a-1~let-7d and potentially other tumor suppressors. MYC and let-7 are key oncoprotein and tumor suppressor, respectively. Understanding the molecular mechanisms of their regulations will provide new insight and have important implications in the therapeutics of GBM as well as other cancers.

  5. Loss of MYC and E-box3 binding contributes to defective MYC-mediated transcriptional suppression of human MC-let-7a-1~let-7d in glioblastoma

    PubMed Central

    Wang, Zifeng; Lin, Sheng; Zhang, Ji; Xu, Zhenhua; Xiang, Yu; Yao, Hong; Ge, Lei; Xie, Dan; Kung, Hsiang-fu; Lu, Gang; Poon, Wai Sang; Liu, Quentin; Lin, Marie Chia-mi

    2016-01-01

    Previously, we reported that MYC oncoprotein down-regulates the transcription of human MC-let-7a-1~let-7d microRNA cluster in hepatocarcinoma (HCC). Surprisingly, in silico analysis indicated that let-7 miRNA expression levels are not reduced in glioblastoma (GBM). Here we investigated the molecular basis of this differential expression. Using human GBM U87 and U251 cells, we first demonstrated that forced over-expression of MYC indeed could not down-regulate the expression of human MC-let-7a-1~let-7d microRNA cluster in GBM. Furthermore, analysis of MC-let-7a-1~let-7d promoter in GBM indicated that MYC failed to inhibit the promoter activity. Pearson's correlation and Linear Regression analysis using the expression data from GSE55092 (HCC) and GSE4290 (GBM) demonstrated a converse relationship of MC-let-7a-1~let-7d and MYC only in HCC but not in GBM. To understand the underlying mechanisms, we examined whether MYC could bind to the non-canonical E-box 3 located in the promoter of MC-let-7a-1~let-7d. Results from both chromatin immune-precipitation (ChIP) and super-shift assays clearly demonstrated the loss of MYC and E-box 3 binding in GBM, suggesting for the first time that a defective MYC and E-box3 binding in GBM is responsible for the differential MYC mediated transcriptional inhibition of MC-let-7a-1~let-7d and potentially other tumor suppressors. MYC and let-7 are key oncoprotein and tumor suppressor, respectively. Understanding the molecular mechanisms of their regulations will provide new insight and have important implications in the therapeutics of GBM as well as other cancers. PMID:27409345

  6. Development of a nondestructive evaluation method for FRP bridge decks

    NASA Astrophysics Data System (ADS)

    Brown, Jeff; Fox, Terra

    2010-05-01

    Open steel grids are typically used on bridges to minimize the weight of the bridge deck and wearing surface. These grids, however, require frequent maintenance and exhibit other durability concerns related to fatigue cracking and corrosion. Bridge decks constructed from composite materials, such as a Fiber-reinforced Polymer (FRP), are strong and lightweight; they also offer improved rideability, reduced noise levels, less maintenance, and are relatively easy to install compared to steel grids. This research is aimed at developing an inspection protocol for FRP bridge decks using Infrared thermography. The finite element method was used to simulate the heat transfer process and determine optimal heating and data acquisition parameters that will be used to inspect FRP bridge decks in the field. It was demonstrated that thermal imaging could successfully identify features of the FRP bridge deck to depths of 1.7 cm using a phase analysis process.

  7. Allowable stresses in FRP marine vessels

    NASA Astrophysics Data System (ADS)

    Visuri, Manuri

    The publication consists of a literature survey of allowable stresses used in fiber-reinforced plastic (FRP) structures, and a new method for the determination of allowable stresses is presented. In the literature survey, primary attention has been paid to the marine industry (including classification societies), the aerospace industry, and to pressure vessel and pipe standards. Generally the subject is only briefly discussed in the literature. This is a drawback, since the conservatism dominating the rules used today often means unnecessary weight penalties. High factors of safety (FoS), except in the aerospace industry, are used in most designs. The short experience of structures in service, wide variety of material combinations and the rather complicated mechanical behavior are the most important factors in this regard. The presented determination method for allowable stresses aims at introducing a more rational way for dimensioning. The method is based on the partial factors of safety concept. A statistical analysis can be included for better accuracy. This requires enough data of material and load behavior. The method is flexible and can be tailored to various needs. One major drawback is the lack of information concerning material behavior under long-term loads. The method is aimed to be expanded in the future.

  8. FRP/steel composite damage acoustic emission monitoring and analysis

    NASA Astrophysics Data System (ADS)

    Li, Dongsheng; Chen, Zhi

    2015-04-01

    FRP is a new material with good mechanical properties, such as high strength of extension, low density, good corrosion resistance and anti-fatigue. FRP and steel composite has gotten a wide range of applications in civil engineering because of its good performance. As the FRP/steel composite get more and more widely used, the monitor of its damage is also getting more important. To monitor this composite, acoustic emission (AE) is a good choice. In this study, we prepare four identical specimens to conduct our test. During the testing process, the AE character parameters and mechanics properties were obtained. Damaged properties of FRP/steel composite were analyzed through acoustic emission (AE) signals. By the growing trend of AE accumulated energy, the severity of the damage made on FRP/steel composite was estimated. The AE sentry function has been successfully used to study damage progression and fracture emerge release rate of composite laminates. This technique combines the cumulative AE energy with strain energy of the material rather than analyzes the AE information and mechanical separately.

  9. Cracking Analysis of FRP-Reinforced Concrete Flexural Members

    NASA Astrophysics Data System (ADS)

    Aiello, M. A.; Ombres, L.

    2000-09-01

    The paper is dedicated to the cracking analysis of FRP (Fiber-Reinforced Polymer)-reinforced concrete elements. A general nonlinear calculation procedure, based on the slip and bond stresses, is described and adopted for the prediction of the crack width and crack spacing in FRP-reinforced concrete beams. An analytical expression of the bond-slip law is estimated using the corresponding experimental results available in the literature. A numerical investigation is carried out and the influence of the mechanical and geometrical parameters of the material (bond-slip law, reinforcement ratio, concrete strength, diameter of rebars, etc.) on the crack formation is investigated. Referring to glass-FRP-reinforced concrete beams, a comparison between the theoretical predictions and experimental results is made. The results obtained are presented and discussed.

  10. Dynamic Characterization of an All-FRP Bridge

    NASA Astrophysics Data System (ADS)

    Casalegno, C.; Russo, S.

    2017-03-01

    The light weight and high deformability of bridges made with pultruded FRP (fiber-reinforced polymer) materials make them very promising, but, at the same time, vulnerable to dynamic loadings. As a consequence, the vibration serviceability limit state can govern their design. There is currently a lack of data about the dynamic characteristics of FRP bridges and of design guidelines for securing their vibration serviceability. The paper presents the results of dynamic testing and characterization of an all-FRP spatial footbridge. The main modal parameters of the bridge are evaluated by an experimental modal analysis and by comparison of experimental data with FE analysis results. The identified flexural and torsional modes of the bridge are characterized by relatively high values of frequencies and damping. Results of the dynamic characterization give useful information about the dynamic characteristics of this kind of structures and can contribute to the elaboration of future guidelines for providing them with the vibration serviceability.

  11. Flexural behaviour of RCC beams with externally bonded FRP

    NASA Astrophysics Data System (ADS)

    Vignesh, S. Arun; Sumathi, A.; Saravana Raja Mohan, K.

    2017-07-01

    The increasing use of carbon and glass fibre reinforced polymer (FRP) sheets for strengthening existing reinforced concrete beams has generated considerable interest in understanding the behavior of the FRP sheets when subjected to bending. The study on flexure includes various parameters like percentage of increase in strength of the member due to the externally bonded Fiber reinforced polymer, examining the crack patterns, reasons of debonding of the fibre from the structure, scaling, convenience of using the fibres, cost effectiveness etc. The present work aims to study experimentally about the reasons behind the failure due to flexure of an EB-FRP concrete beam by studying the various parameters. Deflection control may become as important as flexural strength for the design of FRPreinforced concrete structures. A numerical model is created using FEM software and the results are compared with that of the experiment.

  12. Subsurface Defect Detection in FRP Composites Using Infrared Thermography

    NASA Astrophysics Data System (ADS)

    Halabe, U. B.; Vasudevan, A.; GangaRao, H. V. S.; Klinkhachorn, P.; Lonkar, G.

    2005-04-01

    This paper demonstrates the use of digital infrared thermography to detect subsurface defects such as debonds and delaminations in Fiber Reinforced Polymer (FRP) bridge decks. Simulated sub-surface debonds and delaminations were inserted between the wearing surface and the underlying FRP deck specimens. The infrared thermography technique was used to detect these embedded subsurface defects. The use of various cooling and heating methods, including solar radiation, was explored. Surface temperature-time curves were established for different types and sizes of subsurface defects.

  13. 76 FR 63316 - Prospective Grant of Exclusive License: Secreted Frizzled Related Protein-1 (sFRP-1) and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-12

    ... Prospective Grant of Exclusive License: Secreted Frizzled Related Protein-1 (sFRP-1) and derivatives thereof... a protein designated secreted Frizzled Related Protein-1 (sFRP-1). sFRP-1, also known as SARP-2 (Secreted Apoptosis Related Protein-2). The IP covers various sFRP-1 compositions and uses thereof....

  14. Test methods for FRP-concrete systems subjected to mechanical loads: state of the art review

    SciTech Connect

    Nanni, A.; Bakis, C.E.; Boothby, T.E.

    1995-06-01

    This report addresses the methodology for determining the long-term behavior of bridge structures reinforced with fiber reinforced plastic (FRP) rods. In particular, a review of the existing literature on what has been done and what needs to be done for the development of accelerated test methods, with emphasis on mechanical loads, is presented. The focus of the report is on new, bonded FRP reinforcement for concrete bridge structures. Companion reports address stand-alone FRP systems subjected to mechanical loads, and stand-alone FRP and FRP-concrete systems subjected to environmental loads. 98 refs.

  15. Nde of Frp Wrapped Columns Using Infrared Thermography

    NASA Astrophysics Data System (ADS)

    Halabe, Udaya B.; Dutta, Shasanka Shekhar; GangaRao, Hota V. S.

    2008-02-01

    This paper investigates the feasibility of using Infrared Thermography (IRT) for detecting debonds in Fiber Reinforced Polymer (FRP) wrapped columns. Laboratory tests were conducted on FRP wrapped concrete cylinders of size 6″×12″ (152.4 mm×304.8 mm) in which air-filled and water-filled debonds of various sizes were placed underneath the FRP wraps. Air-filled debonds were made by cutting plastic sheets into the desired sizes whereas water-filled debonds were made by filling water in custom made polyethylene pouches. Both carbon and glass fiber reinforced wraps were considered in this study. Infrared tests were conducted using a fully radiometric digital infrared camera which was successful in detecting air-filled as well as water-filled subsurface debonds. In addition to the laboratory testing, two field trips were made to Moorefield, West Virginia for detecting subsurface debonds in FRP wrapped timber piles of a railroad bridge using infrared testing. The results revealed that infrared thermography can be used as an effective nondestructive evaluation tool for detecting subsurface debonds in structural components wrapped with carbon or glass reinforced composite fabrics.

  16. Effectiveness of FRP in Reducing Corrosion in a Marine Environment

    DTIC Science & Technology

    2009-02-01

    Indoor Controls vs Wrapped Specimens Cracked 15 Effect on Corrosion Rate 16 Role of Layers - CFRP 17 Role of Layers - GFRP 18 Unwrapped Controls 19...Concluding Remarks FRP slows down the corrosion rate Performance of CFRP and GFRP are comparable 36 Linear polarization correctly predicts trends Performance

  17. The engineering of construction specifications for externally bonded FRP composites

    NASA Astrophysics Data System (ADS)

    Yang, Xinbao

    This dissertation, consisting of six technical papers, presents the results of research on the theme of developing engineering and the construction specifications for externally bonded FRP composites. For particular, the work focuses on three critical aspects of the performance of FRP systems: fiber misalignment, corner radius, and lap splice length. Based on both experimental and theoretical investigations, the main contribution of this work is the development of recommendations on fiber misalignment limit, minimum corner radius, lap splice length to be used as guidance in the construction practice of FRP strengthening of concrete structures. The first three papers focus on the strength and stiffness degradation of CFRP laminates from fiber misalignment. It was concluded that misalignment affects strength more than stiffness. In practice, when all fibers in a laminate can be regarded as through fibers, it is recommended to use a reduction factor for strength and no reduction factor for stiffness to account for fiber misalignment. Findings from concrete beams strengthened with misaligned CFRP laminates verified these recommendations. The fourth and fifth papers investigate the effect of corner radius on the mechanical properties of CFRP laminates wrapped around a rectangular cross section. A unique reusable test device was fabricated to determine fiber stress and radial stress of CFRP laminates with different corner radii. Comparison performed with finite element analyses shows that the test method and the reusable device were viable and the stress concentration needs to be considered in FRP laminate wrapped corners. A minimum of 1.0 in. corner radius was recommended for practice. The sixth paper summarizes the research on the lap splice length of FRP laminates under static and repeated loads. Although a lap splice length of 1.5 in. is sufficient for CFRP laminates to develop the ultimate static tensile strength, a minimum of 4.0 in. is recommended in order to

  18. Study on shear behavior of FRP strengthened concrete beams

    NASA Astrophysics Data System (ADS)

    Zhao, J. K.; Xu, X. S.

    2017-04-01

    There are many researches on concrete bending beams reinforced with FRP, and the beam section of the bending strength is enhanced, it is necessary to carry out an oblique section bearing capacity review, if the bearing capacity is insufficient, it is also necessary to strengthen, so as to ensure the ductility of the beam and meet the needs of Engineering safety. In this paper, four concrete beams strengthened with different fibers (CFRP, HFRP and GFRP) were used to study the stress characteristics, failure forms, reasonable reinforcement methods, beam strain conditions, bearing capacity, stiffness and deformation capacity of shear behavior of concrete beams strengthened with different fibers and different forms of reinforcement. The experimental results showed that the FRP reinforcement can not only improve the shear bearing capacity and ultimate deformation of beam, but also increase the stiffness of the beam, reduce the bending deformation under the same load beam, and delay the extension of diagonal cracks.

  19. A method for certification of FRP piping fabricators for ASME B31.3 systems

    SciTech Connect

    Andersen, K.D.

    1996-07-01

    Cost-effective FRP piping is often the material of choice for transport of corrosive chemicals. Plant Managers and Engineers have great concern about the integrity of FRP piping joints and the safety of these systems. A specification requirement, in the bid documents, that all fabricators be Certified by the FRP piping manufacturer is a method to promote successful fabrication. A method is proposed, which is in accordance with ASME B31.3 Piping Code, to train and certify fabricators.

  20. A review on strengthening steel beams using FRP under fatigue.

    PubMed

    Kamruzzaman, Mohamed; Jumaat, Mohd Zamin; Sulong, N H Ramli; Islam, A B M Saiful

    2014-01-01

    In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.

  1. A Review on Strengthening Steel Beams Using FRP under Fatigue

    PubMed Central

    Jumaat, Mohd Zamin; Ramli Sulong, N. H.

    2014-01-01

    In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems. PMID:25243221

  2. Size effect of concrete column retrofitted by fiber-reinforced polymer (FRP)

    NASA Astrophysics Data System (ADS)

    Zhang, Pengpeng; Xu, Xinsheng

    2017-04-01

    At present, the research on the size effect of fiber-reinforced polymer (FRP) reinforced concrete members is not enough, besides the conclusions about size effect are different. It is of great theoretical significance and engineering application value to study the size effect of FRP reinforced concrete members in this field. In this paper, the study status from two aspects containing plain concrete columns and reinforced concrete columns for the retrofitted effect were analyzed and some new problems were put forward in this field. Also the paper mainly discussed the size effect of FRP constraint ratio and column slenderness ratio on FRP retrofitted concrete columns, and the effects of different load forms of FRP reinforced concrete columns under eccentric loading, repeated loading and unloading, and horizontal cyclic loading on the size effect of FRP reinforced concrete columns, and the influence of the single factor change of FRP paste way, type, package type and the concrete strength on the FRP reinforced concrete column. Besides, the changing tendency and regularity of the size effect of FRP strengthened concrete columns under the condition of muti-factors were given.

  3. Self-sensing concrete-filled FRP tubes using FBG strain sensors

    NASA Astrophysics Data System (ADS)

    Yan, Xin; Li, Hui

    2007-07-01

    Concrete-filled fiber-reinforced polymer (FRP) tube is a type of newly developed structural column. It behaves brittle failure at its peak strength, and so the health monitoring on the hoop strain of the FRP tube is essential for the life cycle safety of the structure. Herein, three types of FRP tubes including 5-ply tube, 2-ply tube with local reinforcement and FRP-steel composite tube were embedded with the optic fiber Bragg grating (FBG) strain sensors in the inter-ply of FRP or the interface between FRP and steel in the middle height and the hoop direction. The compressive behaviors of the concrete-filled FRP tubes were experimentally studied. The hoop strains of the FRP tubes were recorded in real time using the embedded FBG strain sensors as well as the embedded or surface electric resistance strain gauges. Results indicated that the FBG strain sensors can faithfully record the hoop strains of the FRP tubes in compression as compared with the embedded or surface electric resistance strain gauges, and the strains recorded can reach more than μɛ.

  4. Boxed In!

    ERIC Educational Resources Information Center

    Stevens, Judith

    2007-01-01

    Early years practitioners know what parents are reminded of every Christmas Day--it does not matter how long families spend carefully selecting the presents, the children are likely to spend longer playing with the empty boxes! Children are fascinated with boxes and practitioners can capitalise on this and support early mathematical development…

  5. Bento Boxes

    ERIC Educational Resources Information Center

    Hasio, Cindy

    2010-01-01

    Bento boxes are common objects in Japanese culture, designed to hold enough lunch for one person. They have individual compartments and sometimes multiple tiers for rice, vegetables, and other side dishes. They are made of materials ranging from wood, cloth, aluminum, or plastic. In general, the greater the number of foods, the better the box is…

  6. Bento Boxes

    ERIC Educational Resources Information Center

    Hasio, Cindy

    2010-01-01

    Bento boxes are common objects in Japanese culture, designed to hold enough lunch for one person. They have individual compartments and sometimes multiple tiers for rice, vegetables, and other side dishes. They are made of materials ranging from wood, cloth, aluminum, or plastic. In general, the greater the number of foods, the better the box is…

  7. Film Boxes.

    ERIC Educational Resources Information Center

    Osterer, Irv

    2002-01-01

    Presents an art lesson in which students created three-dimensional designs for 35mm film packages to improve graphic arts learning. Describes how the students examined and created film boxes using QuarkXPress software. (CMK)

  8. Film Boxes.

    ERIC Educational Resources Information Center

    Osterer, Irv

    2002-01-01

    Presents an art lesson in which students created three-dimensional designs for 35mm film packages to improve graphic arts learning. Describes how the students examined and created film boxes using QuarkXPress software. (CMK)

  9. Investigation of rectangular concrete columns reinforced or prestressed with fiber reinforced polymer (FRP) bars or tendons

    NASA Astrophysics Data System (ADS)

    Choo, Ching Chiaw

    Fiber reinforced polymer (FRP) composites have been increasingly used in concrete construction. This research focused on the behavior of concrete columns reinforced with FRP bars, or prestressed with FRP tendons. The methodology was based the ultimate strength approach where stress and strain compatibility conditions and material constitutive laws were applied. Axial strength-moment (P-M) interaction relations of reinforced or prestressed concrete columns with FRP, a linearly-elastic material, were examined. The analytical results identified the possibility of premature compression and/or brittle-tension failure occurring in FRP reinforced and prestressed concrete columns where sudden and explosive type failures were expected. These failures were related to the rupture of FRP rebars or tendons in compression and/or in tension prior to concrete reaching its ultimate strain and strength. The study also concluded that brittle-tension failure was more likely to occur due to the low ultimate tensile strain of FRP bars or tendons as compared to steel. In addition, the failures were more prevalent when long term effects such as creep and shrinkage of concrete, and creep rupture of FRP were considered. Barring FRP failure, concrete columns reinforced with FRP, in some instances, gained significant moment resistance. As expected the strength interaction of slender steel or FRP reinforced concrete columns were dependent more on column length rather than material differences between steel and FRP. Current ACI minimum reinforcement ratio for steel (rhomin) reinforced concrete columns may not be adequate for use in FRP reinforced concrete columns. Design aids were developed in this study to determine the minimum reinforcement ratio (rhof,min) required for rectangular reinforced concrete columns by averting brittle-tension failure to a failure controlled by concrete crushing which in nature was a less catastrophic and more gradual type failure. The proposed method using rhof

  10. Repair of corrosion-damaged columns using FRP wraps

    NASA Astrophysics Data System (ADS)

    Baiyasi, Mohamad Imad

    Many bridge columns in Michigan are damaged by chloride contamination resulting in the corrosion of the steel reinforcement, and swelling and spalling of the concrete and use of the bridges is typically continued. This in itself may not be a serious problem since most columns in Michigan are over-designed and the loss of strength is not a significant issue. However, the lack of any method to minimize or prevent corrosion of the steel results in continued deterioration and unsightly columns. Polymer composite (also known as fiber-reinforced polymer or FRP) jackets offer a possible remedy to this problem. They offer a rapid repair technique with the potential to enhance the longterm durability and compression strength of damaged columns due to the confinement that is provided when fibers are oriented in the hoop direction. Fibers oriented in the vertical direction can enhance the bending strength. Experiments were conducted to assess the effects of using FRP wraps with fibers oriented in the hoop direction for rehabilitating corrosion-damaged columns. Issues that were explored are: (1) effect of freeze-thaw and wet-dry cycles on the properties of FRP panels; (2) freeze-thaw durability of concrete square and cylindrical specimens wrapped with glass and carbon FRP and subjected to an internal expansive force; and (3) effect of wrapping on the rate of corrosion in an accelerated corrosion test. The results of the freeze-thaw experiment indicate that freeze-thaw cycles have no statistically significant effect on the compressive strength of glass and carbon wrapped specimens. For round specimens, glass and carbon wraps increased the strength by a factor of about 2.3 and 2.6, respectively. For square specimens, glass and carbon wraps increased the strength by a factor of 1.4--1.5. Freeze-thaw conditioning generally reduced the longitudinal failure strain of wrapped specimens. The square wrapped specimens had lower compressive strength compared to the round specimens, even

  11. Mechanical behavior of concrete columns confined by basalt FRP windings

    NASA Astrophysics Data System (ADS)

    Ciniņa, I.; Zīle, E.; Zīle, O.

    2012-11-01

    The results of an experimental investigation of round concrete columns confined by a wound basalt filament yarn are presented. Basalt is an attractive material for strengthening purposes due to its low cost coupled with a good mechanical performance, especially at high temperatures. It is shown that the basalt FRP confinement provides a considerable strengthening effect. The winding equipment employed in this study has the ability to set a desired pretension force of the yarn and thereby to produce a prestressed confinement. It is found that the prestressed confinement notably delays the onset of intense internal cracking of concrete.

  12. Exploding Boxes

    ERIC Educational Resources Information Center

    Kinney; Jan

    2011-01-01

    How do you teach the "same old, same old" in an interesting and inexpensive way? Art teachers are forever looking for new angles on the good-old elements and principles. And, as budgets tighten, they are trying to be as frugal as possible while still holding their students' attention. Enter exploding boxes! In conceptualizing the three types of…

  13. Exploding Boxes

    ERIC Educational Resources Information Center

    Kinney; Jan

    2011-01-01

    How do you teach the "same old, same old" in an interesting and inexpensive way? Art teachers are forever looking for new angles on the good-old elements and principles. And, as budgets tighten, they are trying to be as frugal as possible while still holding their students' attention. Enter exploding boxes! In conceptualizing the three types of…

  14. Experimental study on seismic behavior of circular RC columns strengthened with pre-stressed FRP strips

    NASA Astrophysics Data System (ADS)

    Zhou, Changdong; Lu, Xilin; Li, Hui; Tian, Teng

    2013-12-01

    Bonding fiber reinforced polymer (FRP) has been commonly used to improve the seismic behavior of circular reinforced concrete (RC) columns in engineering practice. However, FRP jackets have a significant stress hysteresis effect in this strengthening method, and pre-tensioning the FRP can overcome this problem. This paper presents test results of 25 circular RC columns strengthened with pre-stressed FRP strips under low cyclic loading. The pre-stressing of the FRP strips, types of FRP strips and longitudinal reinforcement, axial load ratio, pre-damage degree and surface treatments of the specimens are considered as the primary factors in the tests. According to the failure modes and hysteresis curves of the specimens, these factors are analyzed to investigate their effect on bearing capacity, ductility, hysteretic behavior, energy dissipation capacity and other important seismic behaviors. The results show that the initial lateral confined stress provided by pre-stressed FRP strips can effectively inhibit the emergence and development of diagonal shear cracks, and change the failure modes of specimens from brittle shear failure to bending or bending-shear failure with better ductility. As a result, the bearing capacity, ductility, energy dissipation capacity and deformation capacity of the strengthened specimens are all significantly improved.

  15. Accelerated Testing for Long-Term Durability of Various FRP Laminates for Marine Use

    NASA Astrophysics Data System (ADS)

    Miyano, Yasushi; Nakada, Masayuki

    The prediction of long-term fatigue life of various FRP laminates combined with resins, fibers and fabrics for marine use under temperature and water environments were performed by our developed accelerated testing methodology based on the time-temperature superposition principle (TTSP). The base material of five kinds of FRP laminates employed in this study was plain fabric CFRP laminates T300 carbon fibers/vinylester (T300/VE). The first selection of FRP laminate to T300/VE was the combinations of different fabrics, that is flat yarn plain fabric T700 carbon fibers/vinylester (T700/VE-F) and multi-axial knitted T700 carbon fibers/vinylester (T700/VE-K) for marine use and the second selection of FRP laminates to T300/VE was the combinations with different fibers and matrix resin, that is plain fabric T300 carbon fibers/epoxy (T300/EP) and plain fabric E-glass fibers/vinylester (E-glass/VE). These five kinds of FRP laminates were prepared under three water absorption conditions of Dry, Wet and Wet C Dry after molding. The three-point bending constant strain rate (CSR) tests for these FRP laminates at three conditions of water absorption were carried out at various temperatures and strain rates. Furthermore, the three-point bending fatigue tests for these specimens were carried out at various temperatures and frequencies. The flexural CSR and fatigue strengths of these five kinds of FRP laminates strongly depend on water absorption as well as time and temperature. The mater curves of fatigue strength as well as CSR strength for these FRP laminates at three water absorption conditions are constructed by using the test data based on TTSP. It is possible to predict the long term fatigue life for these FRP laminates under an arbitrary temperature and water absorption conditions by using the master curves.

  16. Einstein's boxes

    NASA Astrophysics Data System (ADS)

    Norsen, Travis

    2005-02-01

    At the 1927 Solvay conference, Albert Einstein presented a thought experiment intended to demonstrate the incompleteness of the quantum mechanical description of reality. In the following years, the experiment was modified by Einstein, de Broglie, and several other commentators into a simple scenario involving the splitting in half of the wave function of a single particle in a box. This paper collects together several formulations of this thought experiment from the literature, analyzes and assesses it from the point of view of the Einstein-Bohr debates, the EPR dilemma, and Bell's theorem, and argues for "Einstein's Boxes" taking its rightful place alongside similar but historically better known quantum mechanical thought experiments such as EPR and Schrödinger's Cat.

  17. Push-out tests and evaluation of FRP perfobond rib shear connectors performance

    NASA Astrophysics Data System (ADS)

    Kolpasky, Ludvik; Ryjacek, Pavel

    2017-09-01

    The behavioural characteristics of FRP (fibre-reinforced polymer) perfobond rib shear connector was examined through push-out tests in order to verify the applicability for pedestrian bridge structure. The aim of this study is to determine interaction between high performance concrete slab and handmade FRP plate which represent web of the composite beam. Combination of these modern materials leads to structural system with both great load bearing capacity and also sufficient flexural stiffness of the composite element. Openings cut into the GFRP plate at a variable spacing allow GFRP reinforcement bars to be inserted to act as shear studs. Hand lay-up process can increase suitable properties of FRP for connection by perfobond rib shear connectors. In this study, three push-out tests on fiber-reinforced polymer were performed to investigate their shear behaviour. The results of the push-out tests on FRP perfobond rib shear connector indicates great promise for application in full scale structures.

  18. Study on crack development of concrete beams in bending reinforced with FRP bars

    NASA Astrophysics Data System (ADS)

    Pan, M. X.; Xu, X. S.

    2017-04-01

    The comparatively high tensile strength and low elastic modulus of fiber reinforced polymer (FRP) bars result in deflection and crack width requirements controlling the design of concrete beams reinforced with FRP bars. Consequently, when it comes to the design of such members, the deflection and crack width are first calculated at serviceability limit state, and then are checked at ultimate limit state. In this paper, five concrete beams reinforced with different FRP reinforcement ratios were tested and the crack development and pattern as well as the effect of reinforcement ratio on crack width and spacing were analyzed. The experimental results were compared with the calculation results using design guidelines recommended by Japan JSCE code, American ACI440.1R-03 code and China GB50608-2010 code. Several design suggestions were proposed for bending concrete beams reinforced with FRP bars.

  19. LSA SAF Meteosat FRP products - Part 1: Algorithms, product contents, and analysis

    NASA Astrophysics Data System (ADS)

    Wooster, M. J.; Roberts, G.; Freeborn, P. H.; Xu, W.; Govaerts, Y.; Beeby, R.; He, J.; Lattanzio, A.; Fisher, D.; Mullen, R.

    2015-11-01

    Characterizing changes in landscape fire activity at better than hourly temporal resolution is achievable using thermal observations of actively burning fires made from geostationary Earth Observation (EO) satellites. Over the last decade or more, a series of research and/or operational "active fire" products have been developed from geostationary EO data, often with the aim of supporting biomass burning fuel consumption and trace gas and aerosol emission calculations. Such Fire Radiative Power (FRP) products are generated operationally from Meteosat by the Land Surface Analysis Satellite Applications Facility (LSA SAF) and are available freely every 15 min in both near-real-time and archived form. These products map the location of actively burning fires and characterize their rates of thermal radiative energy release (FRP), which is believed proportional to rates of biomass consumption and smoke emission. The FRP-PIXEL product contains the full spatio-temporal resolution FRP data set derivable from the SEVIRI (Spinning Enhanced Visible and Infrared Imager) imager onboard Meteosat at a 3 km spatial sampling distance (decreasing away from the west African sub-satellite point), whilst the FRP-GRID product is an hourly summary at 5° grid resolution that includes simple bias adjustments for meteorological cloud cover and regional underestimation of FRP caused primarily by underdetection of low FRP fires. Here we describe the enhanced geostationary Fire Thermal Anomaly (FTA) detection algorithm used to deliver these products and detail the methods used to generate the atmospherically corrected FRP and per-pixel uncertainty metrics. Using SEVIRI scene simulations and real SEVIRI data, including from a period of Meteosat-8 "special operations", we describe certain sensor and data pre-processing characteristics that influence SEVIRI's active fire detection and FRP measurement capability, and use these to specify parameters in the FTA algorithm and to make recommendations

  20. FRP Reinforcing bars — designs and methods of manufacture (Review of Patents)

    NASA Astrophysics Data System (ADS)

    Portnov, G.; Bakis, C. E.; Lackey, E.; Kulakov, V.

    2013-09-01

    It is been suggested to devide all FRP reinforcing bars into three groups in accordance with the method used for establishing a bond between the core of the bars and concrete. Patents related to each group are cited and briefly described. At the end of the paper, ideas proposed in the patents are discussed. Problems connected with a practical implementation of FRP reinforcing bars will be considered in the next paper.

  1. The First of a Class: Production of Large Military FRP Displacement Hulls

    DTIC Science & Technology

    1992-09-01

    ester resin was chosen as result:;. the FRP matrix with E -glass reinforcement due to its superior INTRODUCTION resistance to seawater absorption and...single resin systems, these properties were skin FRP hull of vinyl ester resin with not taken advantage of in the scantling E -glass reinforcement...shear to control temperature , humidity, and strength value in the final matrix. dust in a production facility around This phenomena is due primarily

  2. Self-sensing concrete-filled FRP tube using FBG strain sensor

    NASA Astrophysics Data System (ADS)

    Yan, Xin; Li, Hui

    2007-01-01

    Concrete-filled fiber-reinforced polymer (FRP) tube is a type of newly developed structural column. It behaves brittle failure at its peak strength, and so the health monitoring on the hoop strain of the FRP tube is essential for the life cycle safety of the structure. Herein, the optic fiber Bragg grating (FBG) strain sensor was chosen as the strain measuring gauge and embedded in the inter-ply of fibers in the middle height and the hoop direction of the FRP tube. The compressive behaviors of the concrete-filled FRP tubes were experimentally studied. The hoop strain of the FRP tube was recorded in real time using the embedded FBG strain sensor as well as the embedded or surface electric resistance strain gauges. Results indicated that the FBG strain sensor can faithfully record the hoop strain ofthe concrete-filled FRP tubes in compression as compared with the embedded or surface electric resistance strain gauges, and the strain recorded can reach more than 7000μɛ.

  3. Behaviour of concrete beams reinforced withFRP prestressed concrete prisms

    NASA Astrophysics Data System (ADS)

    Svecova, Dagmar

    The use of fibre reinforced plastics (FRP) to reinforce concrete is gaining acceptance. However, due to the relatively low modulus of FRP, in comparison to steel, such structures may, if sufficient amount of reinforcement is not used, suffer from large deformations and wide cracks. FRP is generally more suited for prestressing. Since it is not feasible to prestress all concrete structures to eliminate the large deflections of FRP reinforced concrete flexural members, researchers are focusing on other strategies. A simple method for avoiding excessive deflections is to provide sufficiently high amount of FRP reinforcement to limit its stress (strain) to acceptable levels under service loads. This approach will not be able to take advantage of the high strength of FRP and will be generally uneconomical. The current investigation focuses on the feasibility of an alternative strategy. This thesis deals with the flexural and shear behaviour of concrete beams reinforced with FRP prestressed concrete prisms. FRP prestressed concrete prisms (PCP) are new reinforcing bars, made by pretensioning FRP and embedding it in high strength grout/concrete. The purpose of the research is to investigate the feasibility of using such pretensioned rebars, and their effect on the flexural and shear behaviour of reinforced concrete beams over the entire loading range. Due to the prestress in the prisms, deflection of concrete beams reinforced with this product is substantially reduced, and is comparable to similarly steel reinforced beams. The thesis comprises both theoretical and experimental investigations. In the experimental part, nine beams reinforced with FRP prestressed concrete prisms, and two companion beams, one steel and one FRP reinforced were tested. All the beams were designed to carry the same ultimate moment. Excellent flexural and shear behaviour of beams reinforced with higher prestressed prisms is reported. When comparing deflections of three beams designed to have the

  4. Constitutive Modeling and Numerical Simulation of Frp Confined Concrete Specimens

    NASA Astrophysics Data System (ADS)

    Smitha, Gopinath; Ramachandramurthy, Avadhanam; Nagesh, Ranganatha Iyer; Shahulhameed, Eduvammal Kunhimoideen

    2014-09-01

    Fiber-reinforced polymer (FRP) composites are generally used for the seismic retrofit of concrete members to enhance their strength and ductility. In the present work, the confining effect of Carbon Fiber-Reinforced Polymer (CFRP) composite layers has been investigated by numerical simulation. The numerical simulation has been carried out using nonlinear finite element analysis (FEA) to predict the response behaviour of CFRP-wrapped concrete cylinders. The nonlinear behaviour of concrete in compression and the linear elastic behaviour of CFRP has been modeled using an appropriate constitutive relationship. A cohesive model has been developed for modeling the interface between the concrete and CFRP. The interaction and damage failure criteria between the concrete to the cohesive element and the cohesive element to the CFRP has also been accounted for in the modeling. The response behaviour of the wrapped concrete specimen has been compared with the proposed interface model and with a perfectly bonded condition. The results obtained from the present study showed good agreement with the experimental load-displacement response and the failure pattern in the literature. Further, a sensitivity analysis has been carried out to study the effect of the number of layers of CFRP on the concrete specimens. It has been observed that wrapping with two layers was found to be the optimum, beyond which the response becomes flexible but with a higher load-carrying capacity

  5. Experimental Analysis of Dynamic Effects of FRP Reinforced Masonry Vaults

    PubMed Central

    Corradi, Marco; Borri, Antonio; Castori, Giulio; Coventry, Kathryn

    2015-01-01

    An increasing interest in the preservation of historic structures has produced a need for new methods for reinforcing curved masonry structures, such as arches and vaults. These structures are generally very ancient, have geometries and materials which are poorly defined and have been exposed to long-term historical movements and actions. Consequently, they are often in need of repair or reinforcement. This article presents the results of an experimental study carried out in the laboratory and during on-site testing to investigate the behaviour of brick masonry vaults under dynamic loading strengthened with FRPs (Fiber Reinforced Polymers). For the laboratory tests, the brick vaults were built with solid sanded clay bricks and weak mortar and were tested under dynamic loading. The experimental tests were designed to facilitate analysis of the dynamic behaviour of undamaged, damaged and reinforced vaulted structures. On-site tests were carried out on an earthquake-damaged thin brick vault of an 18th century aristocratic residence in the city of L’Aquila, Italy. The provision of FRP reinforcement is shown to re-establish elastic behavior previously compromised by time induced damage in the vaults. PMID:28793697

  6. Bond strength investigations and structural applicability of composite fiber-reinforced polymer (FRP) rebars

    NASA Astrophysics Data System (ADS)

    Kachlakev, Damian Ivanov

    The composite FRP rebars research at Oregon State University was initiated in 1993 principally to develop a non-metallic hollow reinforcement. It was recognized that the tensile properties of such reinforcement are unquestionably superior to steel, but its performance in concrete could be problematic. The bond between FRP rebars and concrete was identified as a critical area of concern. The purpose of this study is (i) to analyze a variety of FRP and steel reinforcing units; (ii) to advance the knowledge of bond mechanism, failure modes, and parameters influencing the bond strength; (iii) to compare composite rebars to conventional steel and to assess their applicability as reinforcing members. Commercially available FRP rebars were investigated. Particular emphasis was given to a hollow glass FRP rod designed at Oregon State University. Several parameters were investigated, including: failure mode, concrete compressive strength, rebar diameter and circumference/cross section ratio, embedment length, concrete cover, and microstructure of the composite rebars. It was recognized that the ASTM C234-90 pull-out standard is test of concrete strength. Therefore, a modified pull-out test was developed for evaluating the bond strength behavior. A newly developed European bond test procedure was compared with locally modified version of the pull-out method. The new procedure was used for the first time in the United States. The study demonstrated a phenomenon, not reported in the published research at this time, defined as a size effect. The size effects result in lower bond strength with increasing area of the interface between FRP bars and concrete. The next phase of the research was dedicated to the hollow glass FRP rebar. The goal was to compare its bond properties to conventional steel and solid FRP bars. The study led to two new phenomena not described in the literature previously. Results showed that the concrete compressive strength does not significantly affect the

  7. Design and behavior of reinforced concrete beams strengthened with fiber-reinforced plastics (FRP)

    NASA Astrophysics Data System (ADS)

    El-Mihilmy, Mahmoud Tharwat

    A comprehensive investigation of the design and behavior of reinforced concrete beams strengthened with externally bonded FRP laminates has been conducted. The study has confirmed the applicability of the strain compatibility method for calculating the increased ultimate moment capacity of the repaired beams. An upper limit to the amount of FRP that can be added to a specific structure was recommended to ensure ductile behavior. Design charts to facilitate calculations of the ultimate moment capacity for reinforced concrete beams strengthened with FRP laminates were developed. The results of a subsequent parametric investigation indicate that strengthening reinforced concrete beams with FRP laminates can enhance their ultimate capacity by as much as three times the original strength, especially for beams with a low steel ratio. It was also determined that, increasing the concrete compressive strength and the FRP modulus of elasticity increases the beam ultimate flexural capacity significantly; however, the repaired beams are less ductile than the pre-repaired concrete beams. During the course of the study, it had been noticed that the current ACI recommended method for calculating deflections for ordinary reinforced concrete beams does not render an accurate estimate for reinforced concrete beams strengthened with FRP laminates. A simplified equation for predicting the deflection of reinforced concrete beams repaired with FRP was developed and verified with comparisons to experimental results. The effectiveness of strengthening an existing bridge with externally bonded FRP laminates was investigated through comprehensive static and dynamic finite element analyses. The results of these analyses correlate well with field load test results. The repaired girders exhibited an average reduction in reinforcing steel stresses of 11 percent and an average reduction in midspan girder deflections of 9 percent. The results of the study also indicated that existing methods for

  8. An investigation into the impact of cryogenic environment on mechanical stresses in FRP composites

    NASA Astrophysics Data System (ADS)

    Fifo, O.; Basu, B.

    2015-07-01

    Fibre reinforced polymer (FRP) composites are fast becoming a highly utilised engineering material for high performance applications due to their light weight and high strength. Carbon fibre and other high strength fibres are commonly used in design of aerospace structures, wind turbine blades, etc. and potentially for propellant tanks of launch vehicles. For the aforementioned fields of application, stability of the material is essential over a wide range of temperature particularly for structures in hostile environments. Many studies have been conducted, experimentally, over the last decade to investigate the mechanical behaviour of FRP materials at varying subzero temperature. Likewise, tests on aging and cycling effect (room to low temperature) on the mechanical response of FRP have been reported. However, a relatively lesser focused area has been the mechanical behaviour of FRP composites under cryogenic environment. This article reports a finite element method of investigating the changes in the mechanical characteristics of an FRP material when temperature based analysis falls below zero. The simulated tests are carried out using a finite element package with close material properties used in the cited literatures. Tensile test was conducted and the results indicate that the mechanical responses agree with those reported in the literature sited.

  9. Study on RC beams using BOTDA(R)-FRP-OF technique

    NASA Astrophysics Data System (ADS)

    He, Jianping; Zhou, Zhi; Huang, Ying; Ou, Jinping

    2008-03-01

    Brillouin based fiber optic sensing turns to be a promising technology for Structural Health Monitoring (SHM). However, the bare optical fiber is too fragile to act as a practical sensor, so high durability and large range (large strain) Brillouin distributed sensors are in great needs in field applications. For this reason, high durable and large range optical fiber Brillouin Optical Time Domain Analysis sensors packaged by Fiber Reinforcement Polymer (FRP), named BOTDA(R)-FRP-OF, have been studied and developed. Besides, in order to study the large strain, crack and slip between the rebar and concrete in reinforced concrete (RC) beams using BOTDR(A) technique, two RC Beams installed with BOTDA(R)-FRP-OF sensors have been set up. And the damage characteristics of the RC beams were investigated by comparing the strain measured by the BOTDA(R)-FRP-OF sensors and the strain from traditional electric strain gauges. The test results show that the BOTDA(R)-FRP-OF sensor can effectively detect the damage (including crack and slip) characteristic of RC beam, and it is suitable for the long-term structural health monitoring on concrete structures such as bridge, big dam and so on.

  10. Experimental investigation of RC beams using BOTDA(R)-FRP-OF

    NASA Astrophysics Data System (ADS)

    Zhou, Zhi; He, Jianping; Huang, Ying; Ou, Jinping

    2008-04-01

    Brillouin based fiber optic sensing turns to be a promising technology for Structural Health Monitoring (SHM). However, the bare optical fiber is too fragile to act as a practical sensor, so high durability and large range (large strain) Brillouin distributed sensors are in great needs in field applications. For this reason, high durable and large range optical fiber Brillouin Optical Time Domain Analysis (Reflectometer) sensors packaged by Fiber Reinforcement Polymer (FRP), named BOTDA(R)-FRP-OF, have been studied and developed. Besides, in order to study the large strain, crack and slip between the rebar and concrete in reinforced concrete (RC) beams using BOTDR(A) technique, five RC Beams installed with BOTDA(R)-FRP-OF sensors have been set up. And the damage characteristics of the RC beams were investigated by comparing the strain measured by the BOTDA(R)-FRP-OF sensors and the strain from traditional electric strain gauges and Fiber Bragg Grating (FBG) sensors, respectively. The test results show that the BOTDA(R)-FRP-OF sensor can effectively detect the damage (including crack and slip) characteristic of RC beam, and it is suitable for the long-term structural health monitoring on concrete structures such as bridge, big dam and so on.

  11. Distributed Long-Gauge Optical Fiber Sensors Based Self-Sensing FRP Bar for Concrete Structure.

    PubMed

    Tang, Yongsheng; Wu, Zhishen

    2016-02-25

    Brillouin scattering-based distributed optical fiber (OF) sensing technique presents advantages for concrete structure monitoring. However, the existence of spatial resolution greatly decreases strain measurement accuracy especially around cracks. Meanwhile, the brittle feature of OF also hinders its further application. In this paper, the distributed OF sensor was firstly proposed as long-gauge sensor to improve strain measurement accuracy. Then, a new type of self-sensing fiber reinforced polymer (FRP) bar was developed by embedding the packaged long-gauge OF sensors into FRP bar, followed by experimental studies on strain sensing, temperature sensing and basic mechanical properties. The results confirmed the superior strain sensing properties, namely satisfied accuracy, repeatability and linearity, as well as excellent mechanical performance. At the same time, the temperature sensing property was not influenced by the long-gauge package, making temperature compensation easy. Furthermore, the bonding performance between self-sensing FRP bar and concrete was investigated to study its influence on the sensing. Lastly, the sensing performance was further verified with static experiments of concrete beam reinforced with the proposed self-sensing FRP bar. Therefore, the self-sensing FRP bar has potential applications for long-term structural health monitoring (SHM) as embedded sensors as well as reinforcing materials for concrete structures.

  12. Distributed Long-Gauge Optical Fiber Sensors Based Self-Sensing FRP Bar for Concrete Structure

    PubMed Central

    Tang, Yongsheng; Wu, Zhishen

    2016-01-01

    Brillouin scattering-based distributed optical fiber (OF) sensing technique presents advantages for concrete structure monitoring. However, the existence of spatial resolution greatly decreases strain measurement accuracy especially around cracks. Meanwhile, the brittle feature of OF also hinders its further application. In this paper, the distributed OF sensor was firstly proposed as long-gauge sensor to improve strain measurement accuracy. Then, a new type of self-sensing fiber reinforced polymer (FRP) bar was developed by embedding the packaged long-gauge OF sensors into FRP bar, followed by experimental studies on strain sensing, temperature sensing and basic mechanical properties. The results confirmed the superior strain sensing properties, namely satisfied accuracy, repeatability and linearity, as well as excellent mechanical performance. At the same time, the temperature sensing property was not influenced by the long-gauge package, making temperature compensation easy. Furthermore, the bonding performance between self-sensing FRP bar and concrete was investigated to study its influence on the sensing. Lastly, the sensing performance was further verified with static experiments of concrete beam reinforced with the proposed self-sensing FRP bar. Therefore, the self-sensing FRP bar has potential applications for long-term structural health monitoring (SHM) as embedded sensors as well as reinforcing materials for concrete structures. PMID:26927110

  13. Secreted Frizzled related protein-4 (sFRP4) promotes epidermal differentiation and apoptosis

    SciTech Connect

    Maganga, Richard; Giles, Natalie; Adcroft, Katharine; Unni, Ambili; Keeney, Diane; Wood, Fiona; Fear, Mark Dharmarajan, Arunasalam

    2008-12-12

    The skin provides vital protection from infection and dehydration. Maintenance of the skin is through a constant program of proliferation, differentiation and apoptosis of epidermal cells, whereby proliferating cells in the basal layer differentiating to form the keratinized, anucleated stratum corneum. The WNT signalling pathway is known to be important in the skin. WNT signalling has been shown to be important both in epidermal development and in the maintenance and cycling of hair follicles and epidermal stem cells. However, the precise role for this pathway in epidermal differentiation remains unknown. We investigated the role of the WNT signalling inhibitor sFRP4 in epidermal differentiation. sFRP4 is expressed in both normal skin and keratinocytes in culture. Expression of sFRP4 mRNA and protein increases with keratinocyte differentiation and apoptosis, whilst exposure of keratinocytes to exogenous sFRP4 promotes apoptosis and expression of the terminal differentiation marker Involucrin. These data suggest sFRP4 promotes epidermal differentiation.

  14. Expression, purification, and therapeutic implications of recombinant sFRP1.

    PubMed

    Ghoshal, Archita; Ghosh, Siddhartha Sankar

    2015-02-01

    Secreted frizzled-related proteins (sFRPs) constitute a family of proteins, which impede the Wnt signaling pathway. Upregulation of the Wnt cascade is one of the multiple facets of carcinogenesis. Herein, we report the expression, solubilization, purification, characterization, and anti-cell proliferative activity of a novel recombinant GST-tagged sFRP1 of human origin. sFRP1 was cloned into pGEX-4T2 bacterial expression vector, and the recombinant protein was overexpressed in Escherichia coli BL21 (DE3). It was solubilized from inclusion bodies with N-lauroylsarcosine and Triton X-100, before being purified to homogeneity using glutathione agarose affinity chromatography column. The purified protein was characterized using Western blotting, MALDI TOF-TOF, and circular dichroism spectroscopy analysis. Homology modeling and docking studies revealed that tagging GST with sFRP1 does not change the binding conformation of the cysteine-rich domain and hence, possibly does not alter its function. The novel anti-proliferative activity of GST-sFRP1 was demonstrated in a dose-dependent manner on two cancer cell lines, viz., HeLa (cervical cancer) and MCF-7 (breast cancer). Also, combination therapy of the protein with chemotherapeutic drugs resulted in enhanced anti-cancer activity. This opens up a new avenue in the application of recombinant sFRP1 for cancer therapeutics.

  15. The cyanobacterial Fluorescence Recovery Protein has two distinct activities: Orange Carotenoid Protein amino acids involved in FRP interaction.

    PubMed

    Thurotte, Adrien; Bourcier de Carbon, Céline; Wilson, Adjélé; Talbot, Léa; Cot, Sandrine; López-Igual, Rocio; Kirilovsky, Diana

    2017-04-01

    To deal with fluctuating light condition, cyanobacteria have developed a photoprotective mechanism which, under high light conditions, decreases the energy arriving at the photochemical centers. It relies on a photoswitch, the Orange Carotenoid Protein (OCP). Once photoactivated, OCP binds to the light harvesting antenna, the phycobilisome (PBS), and triggers the thermal dissipation of the excess energy absorbed. Deactivation of the photoprotective mechanism requires the intervention of a third partner, the Fluorescence Recovery Protein (FRP). FRP by interacting with the photoactivated OCP accelerates its conversion to the non-active form and its detachment from the phycobilisome. We have studied the interaction of FRP with free and phycobilisome-bound OCP. Several OCP variants were constructed and characterized. In this article we show that OCP amino acid F299 is essential and D220 important for OCP deactivation mediated by FRP. Mutations of these amino acids did not affect FRP activity as helper to detach OCP from phycobilisomes. In addition, while mutated R60L FRP is inactive on OCP deactivation, its activity on the detachment of the OCP from the phycobilisomes is not affected. Thus, our results demonstrate that FRP has two distinct activities: it accelerates OCP detachment from phycobilisomes and then it helps deactivation of the OCP. They also suggest that different OCP and FRP amino acids could be involved in these two activities.

  16. Crack-induced debonding failure in fiber reinforced plastics (FRP) strengthened concrete beams: Experimental and theoretical analysis

    NASA Astrophysics Data System (ADS)

    Pan, Jinlong

    External bonding of FRP plates to the tension substrate of RC beams has been accepted as an efficient and effective technique for flexural strengthening. In this thesis, different problems related to crack-induced debonding of the FRP plate in the flexural strengthened concrete beams have been investigated. FRP strengthened RC beam may fail by FRP debonding from the bottom of a major flexural crack in the span. This kind of failure is studied with the direct shear test in the present research work. Our experimental investigation focuses on the effect of concrete composition on the bond behavior between FRP and concrete. Based on the test results, the bond capacity of the specimen is found to be governed by the concrete surface tensile strength, aggregate size and aggregate content. Then, the neural network is employed to derive an empirical expression for the interfacial fracture energy in terms of concrete surface tensile strength and aggregate content. Using the empirical equation, simulated bond capacity is in good agreement with experimental results. In the FRP strengthened RC beams, debonding of the FRP plate often occurs under the presence of multiple cracks along the span. In the present thesis, experimental and theoretical investigations are performed to study the effect of multiple secondary cracks on the debonding behavior and ultimate load capacity. A new analytical model for FRP debonding under multiple cracks has been developed. The effect of the multiple secondary cracks on the shear softening in the debonded zone is explicitly considered in the model. Using the new model, the simulated values of ultimate load when debonding occurs are in good agreement with measured values. In the FRP strengthened RC beams, concrete cover separation or plate end debonding can be avoided by applying tapers at the FRP plate end. In this situation, it is easier for FRP debonding to be induced by a major flexural crack close to the support. To study the effect of the

  17. Finite ElementModelingof FRP-Confined Concrete using Extended Damage-Plasticity Approach

    NASA Astrophysics Data System (ADS)

    Gholampour, Aliakbar; Ozbakkaloglu, Togay

    2017-08-01

    A study on finite element (FE) modelingof fiber-reinforced polymer (FRP)-confined normal-strength and high-strength concrete (NSC and HSC) based on an extended concrete damage-plasticity approach is presented. The study focuses on the extension ofLubliner’s model by accurately incorporating the effects of confinement level, concrete strength, and nonlinear dilation behavior of FRP-confined concrete. Failure surface and flow rule were established using an up-to-date database. In order to validate the extended damage-plasticity model, the predictions of the FE modeling are compared with the experimental results. These comparisons indicate that the extended approach accurately predicts the compressive behavior of FRP-confined NSC and HSC.

  18. Perspectives Of Employment Of Pultruded FRP Structural Elements In Seismic Engineering Field

    SciTech Connect

    Russo, Salvatore; Silvestri, Mirko

    2008-07-08

    Today the employment of FRP material in structural engineering is in common use, with excellent results in term of applications especially as reinforcement of existing structures. This success is related to the very reduced weight of FRP material, to its performance in term of strength and durability and thanks to the easy use in technical application. There is a modern way to use this material disguised as structural pultruded element (with weight equal to 1600-1800 kg/m{sup 3}) in new constructions, local reinforcements and in other seismic applications. Actually the international technical and scientific literature in form of draft, recommendations and researches on this topic is very rich also taking into account Italian contribution. Some interesting applications of all FRP structures in seismic engineering field are showed in this research in real terms and in form of capability.

  19. Constitutive Behavior and Finite Element Analysis of FRP Composite and Concrete Members

    PubMed Central

    Ann, Ki Yong; Cho, Chang-Geun

    2013-01-01

    The present study concerns compressive and flexural constitutive models incorporated into an isoparametric beam finite element scheme for fiber reinforced polymer (FRP) and concrete composites, using their multi-axial constitutive behavior. The constitutive behavior of concrete was treated in triaxial stress states as an orthotropic hypoelasticity-based formulation to determine the confinement effect of concrete from a three-dimensional failure surface in triaxial stress states. The constitutive behavior of the FRP composite was formulated from the two-dimensional classical lamination theory. To predict the flexural behavior of circular cross-section with FRP sheet and concrete composite, a layered discretization of cross-sections was incorporated into nonlinear isoparametric beam finite elements. The predicted constitutive behavior was validated by a comparison to available experimental results in the compressive and flexural beam loading test. PMID:28788312

  20. Pollution control of wet flue gas desulfurization (FGD) environments with fiberglass-reinforced plastic (FRP) equipment

    SciTech Connect

    Kelley, D.H.

    1994-12-31

    Due to its corrosion resistance to wet FGD environments, high nickel alloy clad/wallpaper steel was the structural material of choice for Phase 1 wet FGD systems. Electric companies were willing to pay a premium for high nickel alloy clad/wallpaper steel because they believed it would last the life of the plant with minimal maintenance. An excellent material for wet FGD service at approximately half the cost of high nickel clad/wallpaper steel, is fiberglass-reinforced plastic (FRP) based on epoxy vinyl ester resin. With case histories dating back to 1972, FRP has become the material of choice for non-structural applications such as lime slurry piping and demister assemblies. It is the purpose of this paper to show that FRP has been successful in structural FGD applications and should be considered by engineers who are interested in lower cost FGD systems that show potential for plant life service.

  1. Synthetic aperture radar image processing techniques for damage detection of FRP-concrete systems

    NASA Astrophysics Data System (ADS)

    Yu, Tzuyang

    2017-04-01

    Electromagnetic imaging enables researchers and engineers to assess the surface and subsurface condition of concrete structures using radar and microwave sensors. Among existing radar imaging methods, synthetic aperture radar (SAR) imaging offers flexible resolution for various purposes in condition assessment. In this paper, two novel SAR image processing techniques are reported for the subsurface condition assessment of FRP(fiber reinforced polymer)-strengthened concrete systems; mathematical morphology (MM) and the K-R-I transform. Glass FRP (GFRP) and carbon CFRP (CFRP) strengthened concrete cylinders are used as examples. From our experimental results, it is found that both techniques are capable of quantifying SAR images for condition assessment. It is also found that Euler's number and the coefficient of correlation of K-R-I curves of SAR images can be used for monitoring subsurface changes in FRP-concrete systems.

  2. Perspectives Of Employment Of Pultruded FRP Structural Elements In Seismic Engineering Field

    NASA Astrophysics Data System (ADS)

    Russo, Salvatore; Silvestri, Mirko

    2008-07-01

    Today the employment of FRP material in structural engineering is in common use, with excellent results in term of applications especially as reinforcement of existing structures. This success is related to the very reduced weight of FRP material, to its performance in term of strength and durability and thanks to the easy use in technical application. There is a modern way to use this material disguised as structural pultruded element (with weight equal to 1600-1800 kg/m3) in new constructions, local reinforcements and in other seismic applications. Actually the international technical and scientific literature in form of draft, recommendations and researches on this topic is very rich also taking into account Italian contribution. Some interesting applications of all FRP structures in seismic engineering field are showed in this research in real terms and in form of capability.

  3. Constitutive Behavior and Finite Element Analysis of FRP Composite and Concrete Members.

    PubMed

    Ann, Ki Yong; Cho, Chang-Geun

    2013-09-10

    The present study concerns compressive and flexural constitutive models incorporated into an isoparametric beam finite element scheme for fiber reinforced polymer (FRP) and concrete composites, using their multi-axial constitutive behavior. The constitutive behavior of concrete was treated in triaxial stress states as an orthotropic hypoelasticity-based formulation to determine the confinement effect of concrete from a three-dimensional failure surface in triaxial stress states. The constitutive behavior of the FRP composite was formulated from the two-dimensional classical lamination theory. To predict the flexural behavior of circular cross-section with FRP sheet and concrete composite, a layered discretization of cross-sections was incorporated into nonlinear isoparametric beam finite elements. The predicted constitutive behavior was validated by a comparison to available experimental results in the compressive and flexural beam loading test.

  4. Dynamic response of RC beams strengthened with near surface mounted Carbon-FRP rods subjected to damage

    NASA Astrophysics Data System (ADS)

    Capozucca, R.; Blasi, M. G.; Corina, V.

    2015-07-01

    Near surface mounted (NSM) technique with fiber reinforced polymer (FRP) is becoming a common method in the strengthening of concrete beams. The availability of NSM FRP technique depends on many factors linked to materials and geometry - dimensions of the rods used, type of FRP material employed, rods’ surface configuration, groove size - and to adhesion between concrete and FRP rods. In this paper detection of damage is investigated measuring the natural frequency values of beam in the case of free-free ends. Damage was due both to reduction of adhesion between concrete and carbon-FRP rectangular and circular rods and cracking of concrete under static bending tests on beams. Comparison between experimental and theoretical frequency values evaluating frequency changes due to damage permits to monitor actual behaviour of RC beams strengthened by NSM CFRP rods.

  5. Secreted Frizzled-related protein-2 (sFRP2) augments canonical Wnt3a-induced signaling

    SciTech Connect

    Marschall, Zofia von; Fisher, Larry W.

    2010-09-24

    Research highlights: {yields} sFRP2 enhances the Wnt3a-induced {beta}-catenin stabilization and its nuclear translocation. {yields} sFRP2 enhances LRP6 phosphorylation and Wnt3a/{beta}-catenin transcriptional reporter activity. {yields} Dickkopf-1 (DKK1) fully antagonizes both Wnt3a/sFRP2-induced LRP6 phosphorylation and transcriptional activity. {yields} sFRP2 enhances expression of genes known to be regulated by Wnt3a signaling. -- Abstract: Secreted Frizzled-related proteins (sFRP) are involved in embryonic development as well as pathological conditions including bone and myocardial disorders and cancer. Because of their sequence homology with the Wnt-binding domain of Frizzled, they have generally been considered antagonists of canonical Wnt signaling. However, additional activities of various sFRPs including both synergism and mimicry of Wnt signaling as well as functions other than modulation of Wnt signaling have been reported. Using human embryonic kidney cells (HEK293A), we found that sFRP2 enhanced Wnt3a-dependent phosphorylation of LRP6 as well as both cytosolic {beta}-catenin levels and its nuclear translocation. While addition of recombinant sFRP2 had no activity by itself, Top/Fop luciferase reporter assays showed a dose-dependent increase of Wnt3a-mediated transcriptional activity. sFRP2 enhancement of Wnt3a signaling was abolished by treatment with the Wnt antagonist, Dickkopf-1 (DKK1). Wnt-signaling pathway qPCR arrays showed that sFRP2 enhanced the Wnt3a-mediated transcriptional up-regulation of several genes regulated by Wnt3a including its antagonists, DKK1, and Naked cuticle-1 homolog (NKD1). These results support sFRP2's role as an enhancer of Wnt/{beta}-catenin signaling, a result with biological impact for both normal development and diverse pathologies such as tumorigenesis.

  6. Microwave detection of delaminations between fiber reinforced polymer (FRP) composite and hardened cement paste

    NASA Astrophysics Data System (ADS)

    Hughes, D.; Kazemi, M.; Marler, K.; Zoughi, R.; Myers, J.; Nanni, A.

    2002-05-01

    Fiber reinforced polymer (FRP) composites are increasingly being used for the rehabilitation of concrete structures. Detection and characterization of delaminations between an FRP composite and a concrete surface are of paramount importance. Consequently, the development of a one sided, non-contact, real time and rapid nondestructive testing (NDT) technique for this purpose is of great interest. Near-field microwave NDT techniques, using open-ended rectangular waveguide probes, have shown great potential for detecting delaminations in layered composite structures such as these. The results of some theoretical and experimental investigations on a specially prepared cement paste specimen are presented here.

  7. Interface transferring mechanism and error modification of FRP-OFBG strain sensor based on standard linear viscoelastic model

    NASA Astrophysics Data System (ADS)

    Li, Jilong; Zhou, Zhi; Ou, Jinping

    2006-03-01

    This paper presents the interface transferring mechanism and error modification of the Fiber Reinforced Polymer-Optical Fiber Bragg Grating (FRP-OFBG) sensing tendons, which including GFRP (Glass Fiber Reinforced Polymer) and CFRP (Carbon Fiber Reinforced Polymer), using standard linear viscoelastic model. The optical fiber is made up of glass, quartz or plastic, et al, which creep strain is very small at room temperature. So the tensile creep compliance of optical fiber is independent of time at room temperature. On the other hand, the FRP (GFRP or CFRP) is composed of a kind of polymeric matrix (epoxy resins or the others) with glass, carbon or aramid fibers, which shear creep strain is dependent of time at room temperature. Hence, the standard linear viscoelastic model is employed to describe the shear creep compliance of FRP along the fiber direction. The expression of interface strain transferring mechanism of FRP-OFBG sensors is derived based on the linear viscoelastic theory and the analytic solution of the error rate is given by the inverse Laplace transform. The effects of FRP viscoelasticity on the error rate of FRP-OFBG sensing tendons are included in the above expression. And the transient and steady-state error modified coefficient of FRP-OFBG sensors are obtained using initial value and final value theorems. Finally, a calculated example is given to explain the correct of theoretical prediction.

  8. Nucleotide variation of sFRP5 gene is not associated with obesity in children and adolescents.

    PubMed

    Van Camp, Jasmijn K; Beckers, Sigri; Zegers, Doreen; Verhulst, Stijn L; Van Hoorenbeeck, Kim; Massa, Guy; Verrijken, An; Desager, Kristine N; Van Gaal, Luc F; Van Hul, Wim

    2016-10-01

    Because sFRP5 was shown to be an important extracellular modulator of the Wnt pathway, regulating adipogenesis, we wanted to investigate the role of sFRP5 variants in human, monogenic obesity by performing mutation analysis. We screened the complete sFRP5 coding region in 622 obese children and adolescents and 503 lean control individuals by high-resolution melting curve analysis and direct sequencing. We found a total of 15 sequence variants in sFRP5, 10 of which resulted in a non-synonymous amino acid change. Five of these variants were, to our knowledge, not previously reported. For one of the variants (c.-3G>A), we identified a trend towards association between the variant frequency and the obese phenotype. We argue that, when looking at conservation and location inside known protein domains, several of the identified variants (D103N, A113V, K212N and H317L), may affect sFRP5 protein function. In addition, we found c.-3G>A, residing in the Kozak sequence, with a lower frequency in cases compared to controls. However, functional studies investigating the effect of sFRP5 variants on protein function are necessary to determine the true role of sFRP5 genetic variation in human, monogenic obesity.

  9. Reliability model for ductile hybrid FRP rebar using randomly dispersed chopped fibers

    NASA Astrophysics Data System (ADS)

    Behnam, Bashar Ramzi

    Fiber reinforced polymer composites or simply FRP composites have become more attractive to civil engineers in the last two decades due to their unique mechanical properties. However, there are many obstacles such as low elasticity modulus, non-ductile behavior, high cost of the fibers, high manufacturing costs, and absence of rigorous characterization of the uncertainties of the mechanical properties that restrict the use of these composites. However, when FRP composites are used to develop reinforcing rebars in concrete structural members to replace the conventional steel, a huge benefit can be achieved since FRP materials don't corrode. Two FRP rebar models are proposed that make use of multiple types of fibers to achieve ductility, and chopped fibers are used to reduce the manufacturing costs. In order to reach the most optimum fractional volume of each type of fiber, to minimize the cost of the proposed rebars, and to achieve a safe design by considering uncertainties in the materials and geometry of sections, appropriate material resistance factors have been developed, and a Reliability Based Design Optimization (RBDO), has been conducted for the proposed schemes.

  10. Spectroscopic Classification of SN 2016frp (= PTSS-16mvz) as a Peculiar Type Ib Supernova

    NASA Astrophysics Data System (ADS)

    Rui, Liming; Wang, Xiaofeng; Li, Wenxiong; Yang, Zesheng; Xu, Zhijian; Li, Bin; Wang, Lifan; Zhao, Haibin; Jia, Junjun; Wu, Hong; Zhang, Tianmeng; Zhang, Jujia

    2016-09-01

    We obtained an optical spectrum (range 370-860 nm) of SN 2016frp (= PTSS-16mvz), discovered by PMO-Tsinghua Supernova Survey (PTSS; http://119.78.210.3/ptss2/), on UT Sep.05.7 2016 with the 2.16-m telescope (+BFOSC) at Xinglong Station of NAOC.

  11. ADDENDUM TO ASSESSMENT OF STYRENE EMISSION CONTROLS FOR FRP/C AND BOAT BUILDING INDUSTRIES

    EPA Science Inventory

    This report is an addendum to a 1996 report, Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries. It presents additional evaluation of the biological treatment of styrene emissions, Dow Chemical Company's Sorbathene solvent vapor recovery system, Occupa...

  12. ASSESSMENT OF STYRENE EMISSION CONTROLS FOR FRP/C AND BOAT BUILDING INDUSTRIES

    EPA Science Inventory

    The report gives results of an evaluation of several conventional and novel emission control technologies that have been used or could be used to treat styrene emissions from open molding processes in fiberglass-reinforced plastics/composites (FRP/C) and fiberglass boat building ...

  13. Mechanical properties and aesthetics of FRP orthodontic wire fabricated by hot drawing.

    PubMed

    Imai, T; Watari, F; Yamagata, S; Kobayashi, M; Nagayama, K; Toyoizumi, Y; Nakamura, S

    1998-12-01

    The FRP wires 0.5 mm in diameter with a multiple fiber structure were fabricated by drawing the fiber polymer complex at 250 degrees C for an esthetic, transparent orthodontic wire. Biocompatible CaO-P2O5-SiO2-Al2O3 (CPSA) glass fibers of 8-20 microm in diameter were oriented unidirectionally in the longitudinal direction in PMMA matrix. The mechanical properties were investigated by 3-point flexural test. The FRP wire showed sufficient strength and a very good elastic recovery after deformation. Young's modulus and the flexural load at deflection 1 mm were nearly independent of the fiber diameter and linearly increased with the fiber fraction. The dependence on fiber fraction obeys well the rule of mixture. This FRP wire could cover the range of strength corresponding to the conventional metal orthodontic wires from Ni-Ti used in the initial stage of orthodontic treatments to Co-Cr used in the final stage by changing the volume ratio of glass fibers with the same external diameter. The estheticity in external appearance was excellent. Thus the new FRP wire can satisfy both mechanical properties necessary for an orthodontic wire and enough estheticity, which was not possible for the conventional metal wire.

  14. Vibrational characteristics of FRP-bonded concrete interfacial defects in a low frequency regime

    NASA Astrophysics Data System (ADS)

    Cheng, Tin Kei; Lau, Denvid

    2014-04-01

    As externally bonded fiber-reinforced polymer (FRP) is a critical load-bearing component of strengthened or retrofitted civil infrastructures, the betterment of structural health monitoring (SHM) methodology for such composites is imperative. Henceforth the vibrational characteristics of near surface interfacial defects involving delamination and trapped air pockets at the FRP-concrete interface are investigated in this study using a finite element approach. Intuitively, due to its lower interfacial stiffness compared with an intact interface, a damaged region is expected to have a set of resonance frequencies different from an intact region when excited by acoustic waves. It has been observed that, when excited acoustically, both the vibrational amplitudes and frequency peaks in the response spectrum of the defects demonstrate a significant deviation from an intact FRP-bonded region. For a thin sheet of FRP bonded to concrete with sizable interfacial defects, the fundamental mode under free vibration is shown to be relatively low, in the order of kHz. Due to the low resonance frequencies of the defects, the use of low-cost equipment for interfacial defect detection via response spectrum analysis is highly feasible.

  15. Fibre Reinforced Polymers (FRP) as Reinforcement for Concrete According to German Approvals

    NASA Astrophysics Data System (ADS)

    Alex, R.

    2015-11-01

    This article demonstrates the possibility of the application of joint principles to develop test programs for national approval or European Technical Assessments of FRP reinforcement for concrete. The limits of different systems are shown, which until now have been approved in Germany.

  16. Evaluation of Fiber Optic Strain Measurement System for Monitoring FRP Bridge Decks

    NASA Astrophysics Data System (ADS)

    Klinkhachorn, P.; Lonkar, G. M.; Halabe, Udaya B.; GangaRao, H. V. S.

    2005-04-01

    The use of Fiber Optic sensors for structural monitoring applications has attained popularity among researchers and practitioners recently due to their immense advantages. This paper discusses a continuous structural monitoring technique using surface mounted and embedded fiber optic strain sensors to measure the strain in FRP bridge decks. An Extrinsic Fabry-Perot Interferometric (EFPI) strain sensor was selected for evaluation as it offers a good compromise between accuracy and cost considerations. This EFPI strain sensor, along with a conventional strain gauge, was surface mounted on a FRP bridge decks. The decks were then subjected to an accelerated aging test in an environmental chamber and the performance of both the strain sensors was recorded for a performance comparison. The results from the seven months of accelerated aging that is equivalent to 10 years of actual life show that the strain gauge sensor and the EFPI Fiber Optic sensor are still in working condition. The EFPI fiber optic sensor detects minute and sudden changes in strain more effectively than the strain gauge sensor. Placement in the environmental chamber did not affect the EFPI sensor's performance and is an indication of its applicability to field structural monitoring for lengthy periods of time. The second part is a preliminary work where a fiber optic sensor was embedded inside a FRP plate during the pultrusion process. This shows the feasibility of manufacturing FRP bridge decks with embedded fiber optic sensors.

  17. ADDENDUM TO ASSESSMENT OF STYRENE EMISSION CONTROLS FOR FRP/C AND BOAT BUILDING INDUSTRIES

    EPA Science Inventory

    This report is an addendum to a 1996 report, Assessment of Styrene Emission Controls for FRP/C and Boat Building Industries. It presents additional evaluation of the biological treatment of styrene emissions, Dow Chemical Company's Sorbathene solvent vapor recovery system, Occupa...

  18. ASSESSMENT OF STYRENE EMISSION CONTROLS FOR FRP/C AND BOAT BUILDING INDUSTRIES

    EPA Science Inventory

    The report gives results of an evaluation of several conventional and novel emission control technologies that have been used or could be used to treat styrene emissions from open molding processes in fiberglass-reinforced plastics/composites (FRP/C) and fiberglass boat building ...

  19. Parametric Study of Shear Strength of Concrete Beams Reinforced with FRP Bars

    NASA Astrophysics Data System (ADS)

    Thomas, Job; Ramadass, S.

    2016-09-01

    Fibre Reinforced Polymer (FRP) bars are being widely used as internal reinforcement in structural elements in the last decade. The corrosion resistance of FRP bars qualifies its use in severe and marine exposure conditions in structures. A total of eight concrete beams longitudinally reinforced with FRP bars were cast and tested over shear span to depth ratio of 0.5 and 1.75. The shear strength test data of 188 beams published in various literatures were also used. The model originally proposed by Indian Standard Code of practice for the prediction of shear strength of concrete beams reinforced with steel bars IS:456 (Plain and reinforced concrete, code of practice, fourth revision. Bureau of Indian Standards, New Delhi, 2000) is considered and a modification to account for the influence of the FRP bars is proposed based on regression analysis. Out of the 196 test data, 110 test data is used for the regression analysis and 86 test data is used for the validation of the model. In addition, the shear strength of 86 test data accounted for the validation is assessed using eleven models proposed by various researchers. The proposed model accounts for compressive strength of concrete ( f ck ), modulus of elasticity of FRP rebar ( E f ), longitudinal reinforcement ratio ( ρ f ), shear span to depth ratio ( a/ d) and size effect of beams. The predicted shear strength of beams using the proposed model and 11 models proposed by other researchers is compared with the corresponding experimental results. The mean of predicted shear strength to the experimental shear strength for the 86 beams accounted for the validation of the proposed model is found to be 0.93. The result of the statistical analysis indicates that the prediction based on the proposed model corroborates with the corresponding experimental data.

  20. Detection of Fatigue Crack in Basalt FRP Laminate Composite Pipe using Electrical Potential Change Method

    NASA Astrophysics Data System (ADS)

    Altabey, Wael A.; Noori, Mohammed

    2017-05-01

    Novel modulation electrical potential change (EPC) method for fatigue crack detection in a basalt fibre reinforced polymer (FRP) laminate composite pipe is carried out in this paper. The technique is applied to a laminate pipe with an embedded crack in three layers [0º/90º/0º]s. EPC is applied for evaluating the dielectric properties of basalt FRP pipe by using an electrical capacitance sensor (ECS) to discern damages in the pipe. Twelve electrodes are mounted on the outer surface of the pipe and the changes in the modulation dielectric properties of the piping system are analyzed to detect damages in the pipe. An embedded crack is created by a fatigue internal pressure test. The capacitance values, capacitance change and node potential distribution of ECS electrodes are calculated before and after crack initiates using a finite element method (FEM) by ANSYS and MATLAB, which are combined to simulate sensor characteristics and fatigue behaviour. The crack lengths of the basalt FRP are investigated for various number of cycles to failure for determining crack growth rate. Response surfaces are adopted as a tool for solving inverse problems to estimate crack lengths from the measured electric potential differences of all segments between electrodes to validate the FEM results. The results show that, the good convergence between the FEM and estimated results. Also the results of this study show that the electrical potential difference of the basalt FRP laminate increases during cyclic loading, caused by matrix cracking. The results indicate that the proposed method successfully provides fatigue crack detection for basalt FRP laminate composite pipes.

  1. LSA SAF Meteosat FRP Products: Part 2 - Evaluation and demonstration of use in the Copernicus Atmosphere Monitoring Service (CAMS)

    NASA Astrophysics Data System (ADS)

    Roberts, G.; Wooster, M. J.; Xu, W.; Freeborn, P. H.; Morcrette, J.-J.; Jones, L.; Benedetti, A.; Kaiser, J.

    2015-06-01

    Characterising the dynamics of landscape scale wildfires at very high temporal resolutions is best achieved using observations from Earth Observation (EO) sensors mounted onboard geostationary satellites. As a result, a number of operational active fire products have been developed from the data of such sensors. An example of which are the Fire Radiative Power (FRP) products, the FRP-PIXEL and FRP-GRID products, generated by the Land Surface Analysis Satellite Applications Facility (LSA SAF) from imagery collected by the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on-board the Meteosat Second Generation (MSG) series of geostationary EO satellites. The processing chain developed to deliver these FRP products detects SEVIRI pixels containing actively burning fires and characterises their FRP output across four geographic regions covering Europe, part of South America and northern and southern Africa. The FRP-PIXEL product contains the highest spatial and temporal resolution FRP dataset, whilst the FRP-GRID product contains a spatio-temporal summary that includes bias adjustments for cloud cover and the non-detection of low FRP fire pixels. Here we evaluate these two products against active fire data collected by the Moderate Resolution Imaging Spectroradiometer (MODIS), and compare the results to those for three alternative active fire products derived from SEVIRI imagery. The FRP-PIXEL product is shown to detect a substantially greater number of active fire pixels than do alternative SEVIRI-based products, and comparison to MODIS on a per-fire basis indicates a strong agreement and low bias in terms of FRP values. However, low FRP fire pixels remain undetected by SEVIRI, with errors of active fire pixel detection commission and omission compared to MODIS ranging between 9-13 and 65-77% respectively in Africa. Higher errors of omission result in greater underestimation of regional FRP totals relative to those derived from simultaneously collected MODIS

  2. LSA SAF Meteosat FRP products - Part 2: Evaluation and demonstration for use in the Copernicus Atmosphere Monitoring Service (CAMS)

    NASA Astrophysics Data System (ADS)

    Roberts, G.; Wooster, M. J.; Xu, W.; Freeborn, P. H.; Morcrette, J.-J.; Jones, L.; Benedetti, A.; Jiangping, H.; Fisher, D.; Kaiser, J. W.

    2015-11-01

    Characterising the dynamics of landscape-scale wildfires at very high temporal resolutions is best achieved using observations from Earth Observation (EO) sensors mounted onboard geostationary satellites. As a result, a number of operational active fire products have been developed from the data of such sensors. An example of which are the Fire Radiative Power (FRP) products, the FRP-PIXEL and FRP-GRID products, generated by the Land Surface Analysis Satellite Applications Facility (LSA SAF) from imagery collected by the Spinning Enhanced Visible and Infrared Imager (SEVIRI) onboard the Meteosat Second Generation (MSG) series of geostationary EO satellites. The processing chain developed to deliver these FRP products detects SEVIRI pixels containing actively burning fires and characterises their FRP output across four geographic regions covering Europe, part of South America and Northern and Southern Africa. The FRP-PIXEL product contains the highest spatial and temporal resolution FRP data set, whilst the FRP-GRID product contains a spatio-temporal summary that includes bias adjustments for cloud cover and the non-detection of low FRP fire pixels. Here we evaluate these two products against active fire data collected by the Moderate Resolution Imaging Spectroradiometer (MODIS) and compare the results to those for three alternative active fire products derived from SEVIRI imagery. The FRP-PIXEL product is shown to detect a substantially greater number of active fire pixels than do alternative SEVIRI-based products, and comparison to MODIS on a per-fire basis indicates a strong agreement and low bias in terms of FRP values. However, low FRP fire pixels remain undetected by SEVIRI, with errors of active fire pixel detection commission and omission compared to MODIS ranging between 9-13 % and 65-77 % respectively in Africa. Higher errors of omission result in greater underestimation of regional FRP totals relative to those derived from simultaneously collected MODIS

  3. EPA EcoBox

    EPA Pesticide Factsheets

    This tool box of ecological risk assessment (Eco-box) includes over 400+ links to tools, models, and databases found within EPA and our Government partners designed that can aid risk assessors with performing exposure assessments.

  4. Secreted frizzled-related protein-5 (sFRP-5) is epigenetically downregulated and functions as a tumor suppressor in kidney cancer

    PubMed Central

    Kawakami, Kazumori; Yamamura, Soichiro; Hirata, Hiroshi; Ueno, Koji; Saini, Sharanjot; Majid, Shahana; Tanaka, Yuichiro; Kawamoto, Ken; Enokida, Hideki; Nakagawa, Masayuki; Dahiya, Rajvir

    2014-01-01

    Secreted frizzled-related protein-5 (sFRP-5) has been identified as one of the secreted antagonists that bind Wnt protein. However, the functional significance of sFRP-5 in renal cell cancer (RCC) has not been reported. We hypothesized that sFRP-5 may be epigenetically downregulated through DNA methylation and histone modification and function as a tumor suppressor gene in RCC. Using tissue microarray and real-time RT-PCR, we found that sFRP-5 was significantly downregulated in kidney cancer tissues and cell lines, respectively. DNA bisulfite sequencing of the sFRP-5 promoter region in RCC cell lines showed it to be densely methylated whereas there was few promoter methylation in normal kidney. The sFRP-5 expression was restored and the acetylation of H3 and H4 histones associated with the sFRP-5 promoter region were significantly increased after treatment with demethylation agent (5-Aza-dc) and histone deacetylase inhibitor (TSA). When RCC cells were transfected with the sFRP-5 gene, significant inhibition of anchorage independent colony formation and cell invasion were observed compared to controls. The sFRP-5 transfection also significantly induced apoptosis in RCC cells. In conclusion, this is the first report documenting that the sFRP-5 is downregulated by promoter methylation and histone acetylation and functions as a tumor suppressor gene by inducing apoptosis in RCC cells. PMID:20340127

  5. sFRP4 signalling of apoptosis and angiostasis uses nitric oxide-cGMP-permeability axis of endothelium.

    PubMed

    Saran, Uttara; Priya, Mani Krishna; Balaguru, Uma Maheswari; Swaminathan, Akila; Nagarajan, Shunmugam; Dharmarajan, Arun; Chatterjee, Suvro

    2017-03-03

    Nitric oxide (NO) plays a critical role in endothelial functions such as cellular migration, vascular permeability and angiogenesis. Angiogenesis, the formation of new blood vessels from "pre-existing" ones is a carefully regulated process and essential during reproduction, development and wound healing. Previously our lab group reported that Secreted Frizzled-Related Protein 4 (sFRP4) could inhibit angiogenesis in both in vitro and in vivo conditions. sFRP4 belongs to a family of secreted glycoproteins that function as antagonists of the canonical Wnt signalling pathway. Although the pro-apoptotic role of sFRP4 is well discussed in literature, little is known in regards to its anti-angiogenic property. The objective of this study was to elucidate sFRP4 implications in NO biology of the endothelium. Results demonstrate that sFRP4 causes endothelial dysfunction by suppressing NO-cGMP signaling and elevating corresponding ROS levels. The imbalance between NO and ROS levels results in apoptosis and subsequent leakiness of endothelium as confirmed in vivo (Texas red/Annxin - CAM assay) and in vitro (Monolayer permeability assay) conditions. Furthermore utilizing peptides synthesized from the CRD domain of sFRP4, our results showed that while these peptides were able to cause endothelial dysfunctions, they did not cause apoptosis of the endothelial cells. Thereby confirming that sFRP4 can mediate its anti-angiogenic effect independent of its pro-apoptotic property. In conclusion, the current study reports that sFRP4-mediated anti-angiogenesis occurs as a result of impaired NO-cGMP signaling which in turn allow for elevation of redox levels and promotion of apoptosis of endothelial cells.

  6. Luminance measurement to evaluate the damage of notched FRP plates in static load

    SciTech Connect

    Hyakutake, H.; Yamamoto, T.

    1995-11-01

    The validity of the damage criterion for notched FRP plates based on the concept of severity near the notch root is subjected to further experimental scrutiny. An experimental program is presented which examines the effect of notch geometry on the damage near the notch root of FRP plates. This is accomplished by obtaining experimental data on the notched specimens of a glass cloth/epoxy laminate for a wide range of notch geometries in tension and bending. The process of initiation and growth of damage near the notch root was measured by means of the luminance measurement technique with a CCD camera. The experiment shows that the growth of damage zone near the notch root was governed predominantly by both the notch-root radius and the maximum elastic stress at the notch root, while it was independent of notch depth and type of loading. On the basis of the concept of severity, the experimental results can be clearly elucidated.

  7. Behavior of Insulated Carbon-FRP-Strengthened RC Beams Exposed to Fire

    NASA Astrophysics Data System (ADS)

    Sayin, B.

    2014-09-01

    There are two main approaches to improving the fire resistance of fiber-reinforced polymer (FRP) systems. While the most common method is to protect or insulate the FRP system, an other way is to use fibers and resins with a better fire performance. This paper presents a numerical investigation into the five protection behavior of insulated carbon-fiber-reinforced-polymer (CFRP)-strengthened reinforced concrete (RC) beams. The effects of external loading and thermal expansion of materials at elevated temperatures are taken into consideration in a finite-element model. The validity of the numerical model is demonstrated with results from an existing experimental study on insulated CFRP-strengthened RC beams. Conclusions of this investigation are employed to predict the structural behavior of CFRP-strengthened concrete structures.

  8. Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays

    NASA Astrophysics Data System (ADS)

    Giurgiutiu, Victor; Harries, Kent; Petrou, Michael; Bost, Joel; Quattlebaum, Josh B.

    2003-12-01

    The capability of embedded piezoelectric wafer active sensors (PWAS) to perform in-situ nondestructive evaluation (NDE) for structural health monitoring (SHM) of reinforced concrete (RC) structures strengthened with fiber reinforced polymer (FRP) composite overlays is explored. First, the disbond detection method were developed on coupon specimens consisting of concrete blocks covered with an FRP composite layer. It was found that the presence of a disbond crack drastically changes the electromechanical (E/M) impedance spectrum measured at the PWAS terminals. The spectral changes depend on the distance between the PWAS and the crack tip. Second, large scale experiments were conducted on a RC beam strengthened with carbon fiber reinforced polymer (CFRP) composite overlay. The beam was subject to an accelerated fatigue load regime in a three-point bending configuration up to a total of 807,415 cycles. During these fatigue tests, the CFRP overlay experienced disbonding beginning at about 500,000 cycles. The PWAS were able to detect the disbonding before it could be reliably seen by visual inspection. Good correlation between the PWAS readings and the position and extent of disbond damage was observed. These preliminary results demonstrate the potential of PWAS technology for SHM of RC structures strengthened with FRP composite overlays.

  9. A state of the art review on reinforced concrete beams with openings retrofitted with FRP

    NASA Astrophysics Data System (ADS)

    Osman, Bashir H.; Wu, Erjun; Ji, Bohai; S Abdelgader, Abdeldime M.

    2016-09-01

    The use of externally bonded fiber reinforced polymer (FRP) sheets, strips or steel plates is a modern and convenient way for strengthening of reinforced concrete (RC) beams. Several researches have been carried out on reinforced concrete beams with web openings that strengthened using fiber reinforced polymer composite. Majority of researches focused on shear strengthening compared with flexural strengthening, while others studied the effect of openings on shear and flexural separately with various loading. This paper investigates the impact of more than sixty articles on opening reinforced concrete beams with and without strengthening by fiber reinforcement polymers FRP. Moreover, important practical issues, which are contributed in shear strengthening of beams with different strengthening techniques, such as steel plate and FRP laminate, and detailed with various design approaches are discussed. Furthermore, a simple technique of applying fiber reinforced polymer contributed with steel plate for strengthening the RC beams with openings under different load application is concluded. Directions for future research based on the existing gaps of the present works are presented.

  10. Damage detection in FRP structures using fiber Bragg grating dynamic strain sensing systems

    NASA Astrophysics Data System (ADS)

    Zhu, Yan; Zhu, Yinian; Hui, Li; Krishnaswamy, Sridhar

    2011-04-01

    Fiber optic sensors have become widely used for structural health monitoring in recent decades. The aim of this research is to characterize the dynamic failure signals emitted in fiber reinforced polymer (FRP) stay cable and specimens using Fiber Bragg Gratings (FBGs) and two types of interferometric demodulation systems, namely Michelson interferometer (MI) and two-wave mixing interferometer (TWMI) for detection. Due to its one-dimensional form, only one FBG and the Michelson interferometer are used for damage monitoring in a carbon FRP stay cable under various types of loading. Michelson interferometer is capable of detecting frequency contents extending up to 500 kHz, where frequency contents below 250 kHz are categorized as matrix failure and those above 300 kHz corresponded to fiber failure. Two channels of FBGs are used with the TWM interferometer to track local damage in coupon-size FRP samples. Using TWM scheme, continuous and burst acoustic emission events are detected with frequency responses extending up to 125 kHz in coupon-size GFRP specimens, limited only by the sampling rate of the data acquisition system. The experimental results suggest that both types of FBG demodulation systems may be suitable for monitoring high frequency mechanical strains in civil structures, providing a tool for local structural damage detection.

  11. Effect of the tapered end of a FRP plate on the interfacial stresses in a strengthened beam used in civil engineering applications

    NASA Astrophysics Data System (ADS)

    Mahi, B. E.; Benrahou, K. H.; Belakhdar, Kh.; Tounsi, A.; Bedia, E. A. Adda

    2014-09-01

    The interfacial stresses of a beam strengthened with a FRP plate, which is widely employed in the civil engineering for rehabilitation and retrofitting of conventional structures, is investigated. An important feature of the reinforced beam is significant stress concentrations in the adhesive at the ends of the FRP plate. To reduce these interfacial stresses, a FRP plate with a tapered end is often used. The finite-difference method is utilized in this work to predict the distribution of interfacial stresses in beams strengthened with a FRP plate having a tapered end. Numerical results from the analysis are presented to demonstrate the advantages of using tapers in the design of strengthened beams.

  12. An Improved Box Theater

    NASA Astrophysics Data System (ADS)

    Huster, Michael E.

    2011-09-01

    While designing an optics lab for a conceptual physics course, I came across a "box theater" activity. The box theater is a pinhole camera obscura made from a box that students put over their heads and shoulders. I use the activity as a capstone experience to explain optical systems. (Classroom demonstrations of the camera obscura have been described by others.2) First, the students build and experiment with a camera obscura made from a plastic cup and a convex lens with a focal length of 7.5 cm, and then "wear" the box theater. The difficulty with the box theater is the dimness of the image. A cloth drape has to be hung from the bottom of the box around the shoulders of the students to prevent light leakage, and the students have to wait a few minutes for their eyes to adjust to the darkness.

  13. GLOVE BOX ATTACHMENT

    DOEpatents

    Butts, H.L.

    1962-02-13

    This invention comprises a housing unit to be fitted between a glove box port and a glove so that a slidable plate within the housing seals off the glove box port for evacuation of the glove box without damage to the glove. The housing and the glove may be evacuated without damage to the glove since movement of the glove is restricted during evacuation by the slidable plate. (AEC)

  14. Math in the Box

    ERIC Educational Resources Information Center

    DeYoung, Mary J.

    2009-01-01

    This article describes how to make an origami paper box and explores the algebra, geometry, and other mathematics that unfolds. A set of origami steps that transforms the paper into an open box can hold mathematical surprises for both students and teachers. An origami lesson can engage students in an open-ended exploration of the relationship…

  15. Math in the Box

    ERIC Educational Resources Information Center

    DeYoung, Mary J.

    2009-01-01

    This article describes how to make an origami paper box and explores the algebra, geometry, and other mathematics that unfolds. A set of origami steps that transforms the paper into an open box can hold mathematical surprises for both students and teachers. An origami lesson can engage students in an open-ended exploration of the relationship…

  16. Thinking outside the Box

    ERIC Educational Resources Information Center

    Fanshawe, Simon; Sriskandarajah, Dhananjayan

    2010-01-01

    Britain is not only more diverse than ever before, but that diversity itself is growing more diverse. Britain's simplistic "tick-box" approach to identity is in danger of inhibiting the very equality it seeks to promote. To question the tick-box is not to accuse local authorities of "political correctness gone mad". The notion…

  17. Straw in a Box

    ERIC Educational Resources Information Center

    Jerrard, Richard; Schneider, Joel; Smallberg, Ralph; Wetzel, John

    2006-01-01

    A problem on a state's high school exit exam asked for the longest straw that would fit in a box. The examiners apparently wanted the length of a diagonal of the box, but the figure accompanying the question suggested otherwise--that the radius of the straw be considered. This article explores that more general problem.

  18. Boxing with neutrino oscillations

    SciTech Connect

    Wagner, D.J. |; Weiler, T.J.

    1999-06-01

    We develop a characterization of neutrino oscillations based on the coefficients of the oscillating terms. These coefficients are individually observable; although they are quartic in the elements of the unitary mixing matrix, they are independent of the conventions chosen for the angle and phase parametrization of the mixing matrix. We call these reparametrization-invariant observables {open_quotes}boxes{close_quotes} because of their geometric relation to the mixing matrix, and because of their association with the Feynman box diagram that describes oscillations in field theory. The real parts of the boxes are the coefficients for the {ital CP}- or {ital T}-even oscillation modes, while the imaginary parts are the coefficients for the {ital CP}- or {ital T}-odd oscillation modes. Oscillation probabilities are linear in the boxes, so measurements can straightforwardly determine values for the boxes (which can then be manipulated to yield magnitudes of mixing matrix elements). We examine the effects of unitarity on the boxes and discuss the reduction of the number of boxes to a minimum basis set. For the three-generation case, we explicitly construct the basis. Using the box algebra, we show that {ital CP} violation may be inferred from measurements of neutrino flavor mixing even when the oscillatory factors have averaged. The framework presented here will facilitate general analyses of neutrino oscillations among n{ge}3 flavors. {copyright} {ital 1999} {ital The American Physical Society}

  19. Thinking outside the Box

    ERIC Educational Resources Information Center

    Fanshawe, Simon; Sriskandarajah, Dhananjayan

    2010-01-01

    Britain is not only more diverse than ever before, but that diversity itself is growing more diverse. Britain's simplistic "tick-box" approach to identity is in danger of inhibiting the very equality it seeks to promote. To question the tick-box is not to accuse local authorities of "political correctness gone mad". The notion…

  20. sFRP4-dependent Wnt signal modulation is critical for bone remodeling during postnatal development and age-related bone loss

    PubMed Central

    Haraguchi, Ryuma; Kitazawa, Riko; Mori, Kiyoshi; Tachibana, Ryosuke; Kiyonari, Hiroshi; Imai, Yuuki; Abe, Takaya; Kitazawa, Sohei

    2016-01-01

    sFRP4 is an extracellular Wnt antagonist that fine-tunes its signal activity by direct binding to Wnts. Bone fragility under oxidative stress by diabetes and aging is partly related to the suppression of the Wnt signal through upregulated sFRP4. Here, to explore the functions of sFRP4 as a balancer molecule in bone development and remodeling, we analyzed the sFRP4 knock-in mouse strain. X-gal and immunohistochemically stained signals in sFRP4-LacZ heterozygous mice were detectable in restricted areas, mostly in osteoblasts and osteoclasts, of the femoral diaphysis after neonatal and postnatal stages. Histological and μCT analyses showed increased trabecular bone mass with alteration of the Wnt signal and osteogenic activity in sFRP4 mutants; this augmented the effect of the buildup of trabecular bone during the ageing period. Our results indicate that sFRP4 plays a critical role in bone development and remodeling by regulating osteoblasts and osteoclasts, and that its functional loss prevents age-related bone loss in the trabecular bone area. These findings imply that sFRP4 functions as a key potential endogenous balancer of the Wnt signaling pathway by efficiently having direct influence on both bone formation and bone absorption during skeletal bone development and maintenance through remodeling. PMID:27117872

  1. Glove box shield

    DOEpatents

    Brackenbush, Larry W.; Hoenes, Glenn R.

    1981-01-01

    According to the present invention, a shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user withdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  2. Glove box shield

    DOEpatents

    Brackenbush, L.W.; Hoenes, G.R.

    A shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user wthdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  3. Glove box shield

    SciTech Connect

    Brackenbush, L.W.; Hoenes, G.R.

    1981-02-17

    According to the present invention, a shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user withdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box. 2 figs.

  4. Use of a molecular decoy to segregate transport from antigenicity in the FrpB iron transporter from Neisseria meningitidis.

    PubMed

    Saleem, Muhammad; Prince, Stephen M; Rigby, Stephen E J; Imran, Muhammad; Patel, Hema; Chan, Hannah; Sanders, Holly; Maiden, Martin C J; Feavers, Ian M; Derrick, Jeremy P

    2013-01-01

    FrpB is an outer membrane transporter from Neisseria meningitidis, the causative agent of meningococcal meningitis. It is a member of the TonB-dependent transporter (TBDT) family and is responsible for iron uptake into the periplasm. FrpB is subject to a high degree of antigenic variation, principally through a region of hypervariable sequence exposed at the cell surface. From the crystal structures of two FrpB antigenic variants, we identify a bound ferric ion within the structure which induces structural changes on binding which are consistent with it being the transported substrate. Binding experiments, followed by elemental analysis, verified that FrpB binds Fe(3+) with high affinity. EPR spectra of the bound Fe(3+) ion confirmed that its chemical environment was consistent with that observed in the crystal structure. Fe(3+) binding was reduced or abolished on mutation of the Fe(3+)-chelating residues. FrpB orthologs were identified in other Gram-negative bacteria which showed absolute conservation of the coordinating residues, suggesting the existence of a specific TBDT sub-family dedicated to the transport of Fe(3+). The region of antigenic hypervariability lies in a separate, external sub-domain, whose structure is conserved in both the F3-3 and F5-1 variants, despite their sequence divergence. We conclude that the antigenic sub-domain has arisen separately as a result of immune selection pressure to distract the immune response from the primary transport function. This would enable FrpB to function as a transporter independently of antibody binding, by using the antigenic sub-domain as a 'molecular decoy' to distract immune surveillance.

  5. The Wnt modulator sFRP2 enhances mesenchymal stem cell engraftment, granulation tissue formation and myocardial repair

    PubMed Central

    Alfaro, Maria P.; Pagni, Matthew; Vincent, Alicia; Atkinson, James; Hill, Michael F.; Cates, Justin; Davidson, Jeffrey M.; Rottman, Jeffrey; Lee, Ethan; Young, Pampee P.

    2008-01-01

    Cell-based therapies, using multipotent mesenchymal stem cells (MSCs) for organ regeneration, are being pursued for cardiac disease, orthopedic injuries and biomaterial fabrication. The molecular pathways that regulate MSC-mediated regeneration or enhance their therapeutic efficacy are, however, poorly understood. We compared MSCs isolated from MRL/MpJ mice, known to demonstrate enhanced regenerative capacity, to those from C57BL/6 (WT) mice. Compared with WT-MSCs, MRL-MSCs demonstrated increased proliferation, in vivo engraftment, experimental granulation tissue reconstitution, and tissue vascularity in a murine model of repair stimulation. The MRL-MSCs also reduced infarct size and improved function in a murine myocardial infarct model compared with WT-MSCs. Genomic and functional analysis indicated a downregulation of the canonical Wnt pathway in MRL-MSCs characterized by significant up-regulation of specific secreted frizzled-related proteins (sFRPs). Specific knockdown of sFRP2 by shRNA in MRL-MSCs decreased their proliferation and their engraftment in and the vascular density of MRL-MSC-generated experimental granulation tissue. These results led us to generate WT-MSCs overexpressing sFRP2 (sFRP2-MSCs) by retroviral transduction. sFRP2-MSCs maintained their ability for multilineage differentiation in vitro and, when implanted in vivo, recapitulated the MRL phenotype. Peri-infarct intramyocardial injection of sFRP2-MSCs resulted in enhanced engraftment, vascular density, reduced infarct size, and increased cardiac function after myocardial injury in mice. These findings implicate sFRP2 as a key molecule for the biogenesis of a superior regenerative phenotype in MSCs. PMID:19017790

  6. Strengthening of reinforced concrete beams with basalt-based FRP sheets: An analytical assessment

    SciTech Connect

    Nerilli, Francesca; Vairo, Giuseppe

    2016-06-08

    In this paper the effectiveness of the flexural strengthening of RC beams through basalt fiber-reinforced sheets is investigated. The non-linear flexural response of RC beams strengthened with FRP composites applied at the traction side is described via an analytical formulation. Validation results and some comparative analyses confirm soundness and consistency of the proposed approach, and highlight the good mechanical performances (in terms of strength and ductility enhancement of the beam) produced by basalt-based reinforcements in comparison with traditional glass or carbon FRPs.

  7. Strengthening of reinforced concrete beams with basalt-based FRP sheets: An analytical assessment

    NASA Astrophysics Data System (ADS)

    Nerilli, Francesca; Vairo, Giuseppe

    2016-06-01

    In this paper the effectiveness of the flexural strengthening of RC beams through basalt fiber-reinforced sheets is investigated. The non-linear flexural response of RC beams strengthened with FRP composites applied at the traction side is described via an analytical formulation. Validation results and some comparative analyses confirm soundness and consistency of the proposed approach, and highlight the good mechanical performances (in terms of strength and ductility enhancement of the beam) produced by basalt-based reinforcements in comparison with traditional glass or carbon FRPs.

  8. Behavior of Concrete Cylinders Strengthened with a Basalt-FRP and Subjected to Mechanical Loads and Elevated Temperatures

    NASA Astrophysics Data System (ADS)

    Tulendinov, T.; Zesers, A.; Tamužs, V.

    2017-09-01

    Concrete samples were manufactured and strengthened with a basalt FRP (BFRP) using two kinds of winding patterns (spiral and tight). The efficiency of common and temperature-resistant epoxy binders were studied. Some of the samples were encased in an external concrete shell for an additional protection of the FRP reinforcement during heating. Both plain and polypropylene-microfiber-reinforced concretes were used for the external casing. Stress-strain relations of the samples before and after heating were obtained. The effects of high temperatures on the integrity of concrete samples with a BFRP reinforcement was investigated.

  9. Nonlinear micromechanics-based finite element analysis of the interfacial behaviour of FRP-strengthened reinforced concrete beams

    NASA Astrophysics Data System (ADS)

    Abd El Baky, Hussien

    This research work is devoted to theoretical and numerical studies on the flexural behaviour of FRP-strengthened concrete beams. The objectives of this research are to extend and generalize the results of simple experiments, to recommend new design guidelines based on accurate numerical tools, and to enhance our comprehension of the bond performance of such beams. These numerical tools can be exploited to bridge the existing gaps in the development of analysis and modelling approaches that can predict the behaviour of FRP-strengthened concrete beams. The research effort here begins with the formulation of a concrete model and development of FRP/concrete interface constitutive laws, followed by finite element simulations for beams strengthened in flexure. Finally, a statistical analysis is carried out taking the advantage of the aforesaid numerical tools to propose design guidelines. In this dissertation, an alternative incremental formulation of the M4 microplane model is proposed to overcome the computational complexities associated with the original formulation. Through a number of numerical applications, this incremental formulation is shown to be equivalent to the original M4 model. To assess the computational efficiency of the incremental formulation, the "arc-length" numerical technique is also considered and implemented in the original Bazant et al. [2000] M4 formulation. Finally, the M4 microplane concrete model is coded in FORTRAN and implemented as a user-defined subroutine into the commercial software package ADINA, Version 8.4. Then this subroutine is used with the finite element package to analyze various applications involving FRP strengthening. In the first application a nonlinear micromechanics-based finite element analysis is performed to investigate the interfacial behaviour of FRP/concrete joints subjected to direct shear loadings. The intention of this part is to develop a reliable bond--slip model for the FRP/concrete interface. The bond

  10. Voice box (image)

    MedlinePlus

    The larynx, or voice box, is located in the neck and performs several important functions in the body. The larynx is involved in swallowing, breathing, and voice production. Sound is produced when the air which ...

  11. Climate in a Box

    NASA Image and Video Library

    NASA's Climate in a Box Project is exploring the utility of supercomputers in providing a complete, pre-packaged, ready-to-use toolkit of climate research products and on-demand access to a high-pe...

  12. Nonneurologic emergencies in boxing.

    PubMed

    Coletta, Domenic F

    2009-10-01

    Professional boxing has done an admirable job in promoting safety standards in its particular sport. However, injuries occur during the normal course of competition and, unfortunately, an occasional life-threatening emergency may arise. Although most common medical emergencies in boxing are injuries from closed head trauma, in this article those infrequent but potentially catastrophic nonneurologic conditions are reviewed along with some less serious emergencies that the physician must be prepared to address.

  13. Freedom to box.

    PubMed Central

    Warburton, N

    1998-01-01

    The british Medical Association wants to criminalise all boxing. This article examines the logic of the arguments it uses and finds them wanting. The move from medical evidence about the risk of brain damage to the conclusion that boxing should be banned is not warranted. The BMA's arguments are a combination of inconsistent paternalism and legal moralism. Consistent application of the principles implicit in the BMA's arguments would lead to absurd consequences and to severe limitations being put on individual freedom. PMID:9549684

  14. [Boxing: traumatology and prevention].

    PubMed

    Cabanis, Emmanuel-Alain; Iba-Zizen, Marie-Thérèse; Perez, Georges; Senegas, Xavier; Furgoni, Julien; Pineau, Jean-Claude; Louquet, Jean-Louis; Henrion, Roger

    2010-10-01

    In 1986, a surgeon who, as an amateur boxer himself was concerned with boxers' health, approached a pioneering Parisian neuroimaging unit. Thus began a study in close cooperation with the French Boxing Federation, spanning 25 years. In a first series of 52 volunteer boxers (13 amateurs and 39 professionals), during which MRI gradually replaced computed tomography, ten risk factors were identified, which notably included boxing style: only one of 40 "stylists" with a good boxing technique had cortical atrophy (4.5 %), compared to 15 % of "sloggers". Changes to the French Boxing Federation rules placed the accent on medical prevention. The second series, of 247 boxers (81 amateurs and 266 professionals), showed a clear improvement, as lesions were suspected in 14 individuals, of which only 4 (1.35 %) were probably due to boxing. The third and fourth series were part of a protocol called "Brain-Boxing-Ageing", which included 76 boxers (11 having suffered KOs) and 120 MRI scans, with reproducible CT and MRI acquisitions (9 sequences with 1.5 T then 3 T, and CT). MRI anomalies secondary to boxing were found in 11 % of amateurs and 38 % of professionals (atrophy, high vascular T2 signal areas, 2 cases of post-KO subdural bleeding). CT revealed sinus damage in 13 % of the amateurs and 19 % of the professionals. The risk of acute and chronic facial and brain damage was underline, along with detailed precautionary measures (organization of bouts, role of the referee and ringside doctor, and application of French Boxing Federation rules).

  15. Infectious disease and boxing.

    PubMed

    King, Osric S

    2009-10-01

    There are no unique boxing diseases but certain factors contributing to the spread of illnesses apply strongly to the boxer, coach, and the training facility. This article examines the nature of the sport of boxing and its surrounding environment, and the likelihood of spread of infection through airborne, contact, or blood-borne routes of transmission. Evidence from other sports such as running, wrestling, and martial arts is included to help elucidate the pathophysiologic elements that could be identified in boxers.

  16. Automatic box loader

    DOEpatents

    Eldridge, Harry H.; Jones, Robert A.; Lindner, Gordon M.; Hight, Paul H.

    1976-01-01

    This invention relates to a system for repetitively forming an assembly consisting of a single layer of tubes and a row of ferromagnetic armatures underlying the same, electromagnetically conveying the resulting assembly to a position overlying a storage box, and depositing the assembly in the box. The system includes means for simultaneously depositing a row of the armatures on the inclined surface of a tube retainer. Tubes then are rolled down the surface to form a single tube layer bridging the armatures. A magnet assembly carrying electromagnets respectively aligned with the armatures is advanced close to the tube layer, and in the course of this advance is angularly displaced to bring the pole pieces of the electromagnets into parallelism with the tube layer. The magnets then are energized to pick up the assembly. The loaded magnet assembly is retracted to a position overlying the box, and during this retraction is again displaced to bring the pole pieces of the electromagnets into a horizontal plane. Means are provided for inserting the loaded electromagnets in the box and then de-energizing the electromagnets to deposit the assembly therein. The system accomplishes the boxing of fragile tubes at relatively high rates. Because the tubes are boxed as separated uniform layers, subsequent unloading operations are facilitated.

  17. Cable Tester Box

    NASA Technical Reports Server (NTRS)

    Lee, Jason H.

    2011-01-01

    Cables are very important electrical devices that carry power and signals across multiple instruments. Any fault in a cable can easily result in a catastrophic outcome. Therefore, verifying that all cables are built to spec is a very important part of Electrical Integration Procedures. Currently, there are two methods used in lab for verifying cable connectivity. (1) Using a Break-Out Box and an ohmmeter this method is time-consuming but effective for custom cables and (2) Commercial Automated Cable Tester Boxes this method is fast, but to test custom cables often requires pre-programmed configuration files, and cables used on spacecraft are often uniquely designed for specific purposes. The idea is to develop a semi-automatic continuity tester that reduces human effort in cable testing, speeds up the electrical integration process, and ensures system safety. The JPL-Cable Tester Box is developed to check every single possible electrical connection in a cable in parallel. This system indicates connectivity through LED (light emitting diode) circuits. Users can choose to test any pin/shell (test node) with a single push of a button, and any other nodes that are shorted to the test node, even if they are in the same connector, will light up with the test node. The JPL-Cable Tester Boxes offers the following advantages: 1. Easy to use: The architecture is simple enough that it only takes 5 minutes for anyone to learn how operate the Cable Tester Box. No pre-programming and calibration are required, since this box only checks continuity. 2. Fast: The cable tester box checks all the possible electrical connections in parallel at a push of a button. If a cable normally takes half an hour to test, using the Cable Tester Box will improve the speed to as little as 60 seconds to complete. 3. Versatile: Multiple cable tester boxes can be used together. As long as all the boxes share the same electrical potential, any number of connectors can be tested together.

  18. A phenomenological intra-laminar plasticity model for FRP composite materials

    NASA Astrophysics Data System (ADS)

    Zhou, Yinhua; Hou, Chi; Wang, Wenzhi; Zhao, Meiying; Wan, Xiaopeng

    2015-07-01

    The nonlinearity of fibre-reinforced polymer (FRP) composites have significant effects on the analysis of composite structures. This article proposes a phenomenological intralaminar plasticity model to represent the nonlinearity of FRP composite materials. Based on the model presented by Ladeveze et al., the plastic potential and hardening functions are improved to give a more rational description of phenomenological nonlinearity behavior. A four-parameter hardening model is built to capture important features of the hardening curve and consequently gives the good matching of the experiments. Within the frame of plasticity theory, the detailed constitutive model, the numerical algorithm and the derivation of the tangent stiffness matrix are presented in this study to improve model robustness. This phenomenological model achieved excellent agreement between the experimental and simulation results in element scale respectively for glass fibre-reinforced polymer (GFRP) and carbon fibre-reinforced polymer (CFRP). Moreover, the model is capable of simulating the nonlinear phenomenon of laminates, and good agreement is achieved in nearly all cases.

  19. Temperature-dependence of the mechanical properties of FRP orthodontic wire.

    PubMed

    Imai, T; Yamagata, S; Watari, F; Kobayashi, M; Nagayama, K; Toyoizumi, H; Uga, M; Nakamura, S

    1999-06-01

    The temperature-dependence of the mechanical properties of a new esthetic orthodontic wire with fiber-reinforced plastic (FRP) structure was investigated. The new FRP wire, fabricated by a hot drawing method, is 0.5 mm in diameter and has a multiple fiber structure composed of biocompatible CaO-P2O5-SiO2-Al2O3 glass fibers of 20 microns in diameter and a polymethyl methacrylate matrix. The flexural load at a deflection of 1 mm and Young's modulus at 24, 37, and 50 degrees C under wet conditions showed similar fiber fraction dependence to those under dry conditions for a fiber fraction of 40-51%. The flexural load and Young's modulus tended to decrease slightly with increases in temperature. This tendency was larger for the lower fiber fraction. However, the difference in flexural load for a temperature difference of between 24 degrees C and 50 degrees C was at most 10 gf. This is negligibly small, and a constant orthodontic force regarding temperature change would be advantageous from a clinical point of view.

  20. Detection and monitoring of FRP-concrete debonding using distributed fiber optic strain sensor

    NASA Astrophysics Data System (ADS)

    Imai, M.; Feng, M.

    2009-03-01

    To develop a simple method for detecting and monitoring FRP-concrete debonding with the use of distributed Brillouinbased fiber optic strain sensor, this study proposes a model that takes into consideration both the steady and the transient Brillouin interaction states. Assuming that the transient term has an analogous effect on the steady state term, two parameters, the effective transient length and the intensity reduction ratio, are introduced. The proposed model shows that the stimulated Brillouin signal intensity distribution at the specific frequency, which corresponds to the maximum strain at the debonded region, is sensitive to the occurrence of debonding. For evaluation of the model, experiments are carried out on a reinforced concrete beam retrofitted with glass FRP sheets on which sensing fibers are mounted, and the results agree with the observation. This numerical and experimental study demonstrates the effectiveness of the proposed model that incorporates not only the steady Brillouin interaction state. The model enables debonding detection without baseline measurement, leveraging the stimulated Brillouin scattering principle with high spatial resolution and high accuracy.

  1. Fabry-Perot sensors for the monitoring of FRP reinforced bridge decks

    NASA Astrophysics Data System (ADS)

    Benmokrane, Brahim; Quirion, Marco; El-Salakawy, Ehab; Debaiky, Ahmed S.; Lackey, Tom

    2004-07-01

    The extensive use of deicing salts in Canada during winter times is identified as the main reason behind the deterioration of highway bridges and parking garages. To fight this infrastructure crisis, Fibre Reinforced Polymers (FRP) has become a very attractive alternative to traditional reinforcing steel due to their non-corrosive nature and light weight. The replacement of steel with Glass FRP bars in bridge deck slabs has been extensively researched in the last few years. This paper presents the first efforts to implement these bars in two highway bridges in Quebec, Canada, and Vermont, USA. These projects are aimed to prove the feasibility of using GFRP bars in bridge construction. GFRP bars were used as reinforcement for parts of the deck slabs in the two bridges while traditional steel was used in the remaining parts. Fibre Optic Sensors (FOS) were used to measure strains in the concrete, reinforcing bars and steel girders. The sensors were surface mounted on the bars or steel girders using standard glue, or embedded in concrete. Static and dynamic testing of the bridges was done using loaded trucks placed for maximum stresses. The design, construction, testing, and results obtained from the bridges are briefly outlined in this paper. The results indicated the accuracy of the sensors and their feasibility for bridge construction and remote monitoring.

  2. Influence of terahertz waves on the penetration in thick FRP composite materials

    NASA Astrophysics Data System (ADS)

    Im, Kwang-Hee; Hsu, David K.; Chiou, Chien-Ping; Barnard, Daniel J.; Yang, In-Young; Park, Je-Woong

    2014-02-01

    Fiber reinforced plastics (FRP) are increasingly utilized in engineering structures because of their performance and fabrication advantages. With this increased utilization, a technique to gage quality and further characterize the materials would be beneficial. The nondestructive applications for Terahertz (T-ray) methods have also experienced increased utilization for evaluating engineering materials and will be reported on here in applications for the inspection and characterization of FRP materials used in wind energy components. First, refraction and transmission T-ray modes are used to determine the refractive index (n) of a glass fiber reinforced plastic (GFRP) reference sample, and extended for calculating the refractive indices for a sample of GFRP, balsa and epoxy. Additionally, carbon fiber reinforced plastic (CFRP) samples were evaluated with respect to fiber directions versus T-ray electric field polarization direction to evaluate the level of penetration of T-ray energy due to the fiber orientation dependent conductivity of this composite material. Finally, an evaluation of T-ray data was made to evaluate resonance effects, where the resonance frequency was found to agree with that expected from reflections from individual plies in thick GFRP laminates.

  3. Monitoring Poisson's Ratio Degradation of FRP Composites under Fatigue Loading Using Biaxially Embedded FBG Sensors.

    PubMed

    Akay, Erdem; Yilmaz, Cagatay; Kocaman, Esat S; Turkmen, Halit S; Yildiz, Mehmet

    2016-09-19

    The significance of strain measurement is obvious for the analysis of Fiber-Reinforced Polymer (FRP) composites. Conventional strain measurement methods are sufficient for static testing in general. Nevertheless, if the requirements exceed the capabilities of these conventional methods, more sophisticated techniques are necessary to obtain strain data. Fiber Bragg Grating (FBG) sensors have many advantages for strain measurement over conventional ones. Thus, the present paper suggests a novel method for biaxial strain measurement using embedded FBG sensors during the fatigue testing of FRP composites. Poisson's ratio and its reduction were monitored for each cyclic loading by using embedded FBG sensors for a given specimen and correlated with the fatigue stages determined based on the variations of the applied fatigue loading and temperature due to the autogenous heating to predict an oncoming failure of the continuous fiber-reinforced epoxy matrix composite specimens under fatigue loading. The results show that FBG sensor technology has a remarkable potential for monitoring the evolution of Poisson's ratio on a cycle-by-cycle basis, which can reliably be used towards tracking the fatigue stages of composite for structural health monitoring purposes.

  4. sFRP2 in the aged microenvironment drives melanoma metastasis and therapy resistance

    PubMed Central

    Kaur, Amanpreet; Webster, Marie R.; Marchbank, Katie; Behera, Reeti; Ndoye, Abibatou; Kugel, Curtis H.; Dang, Vanessa M.; Appleton, Jessica; O’Connell, Michael P.; Cheng, Phil; Valiga, Alexander A.; Morissette, Rachel; McDonnell, Nazli B.; Ferrucci, Luigi; Kossenkov, Andrew V.; Meeth, Katrina; Tang, Hsin-Yao; Yin, Xiangfan; Wood, William H.; Lehrmann, Elin; Becker, Kevin G.; Flaherty, Keith T.; Frederick, Dennie T.; Wargo, Jennifer A.; Cooper, Zachary A.; Tetzlaff, Michael T.; Hudgens, Courtney; Aird, Katherine M.; Zhang, Rugang; Xu, Xiaowei; Liu, Qin; Bartlett, Edmund; Karakousis, Giorgos; Eroglu, Zeynep; Lo, Roger S.; Chan, Matthew; Menzies, Alexander M.; Long, Georgina V.; Johnson, Douglas B.; Sosman, Jeffrey; Schilling, Bastian; Schadendorf, Dirk; Speicher, David W.; Bosenberg, Marcus; Ribas, Antoni; Weeraratna, Ashani T.

    2016-01-01

    Cancer is a disease of aging, and aged cancer patients have a poorer prognosis. This may be due to accumulated cellular damage, decreases in adaptive immunity, and chronic inflammation. However, the effects of the aged microenvironment on tumor progression have been largely unexplored. Since dermal fibroblasts can have profound impacts on melanoma progression1–4 we examined whether age-related changes in dermal fibroblasts could drive melanoma metastasis and response to targeted therapy. We find that aged fibroblasts secrete a Wnt antagonist, sFRP2, which activates a multi-step signaling cascade in melanoma cells that results in a decrease in β-catenin and MITF, and ultimately the loss of a key redox effector, APE1. Loss of APE1 attenuates the response of melanoma cells to ROS-induced DNA damage, rendering them more resistant to targeted therapy (vemurafenib). Age-related increases in sFRP2 also augment both angiogenesis and metastasis of melanoma cells. These data provide an integrated view of how fibroblasts in the aged microenvironment contribute to tumor progression, offering new paradigms for the design of therapy for the elderly. PMID:27042933

  5. Defect visualization in FRP-bonded concrete by using high speed camera and motion magnification technique

    NASA Astrophysics Data System (ADS)

    Qiu, Qiwen; Lau, Denvid

    2017-04-01

    High speed camera has the unique capacity of recording fast-moving objects. By using the video processing technique (e.g. motion magnification), the small motions recorded by the high speed camera can be visualized. Combined use of video camera and motion magnification technique is strongly encouraged to inspect the structures from a distant scene of interest, due to the commonplace availability, operational convenience, and cost-efficiency. This paper presents a non-contact method to evaluate the defect in FRP-bonded concrete structural element based on the surface motion analysis of high speed video. In this study, an instant air pressure is used to initiate the vibration of FRP-bonded concrete and cause the distinct vibration for the interfacial defects. The entire structural surface under the air pressure is recorded by a high-speed camera and the surface motion in video is amplified by motion magnification processing technique. The experimental results demonstrate that motion in the interfacial defect region can be visualized in the high-speed video with motion magnification. This validates the effectiveness of the new NDT method for defect detection in the whole composites structural member. The use of high-speed camera and motion magnification technique has the advantages of remote detection, efficient inspection, and sensitive measurement, which would be beneficial to structural health monitoring.

  6. Deformation behavior of FRP-metal composites locally reinforced with carbon fibers

    NASA Astrophysics Data System (ADS)

    Scholze, M.; Kolonko, A.; Lindner, T.; Lampke, T.; Helbig, F.

    2016-03-01

    This study investigates variations of hybrid laminates, consisting of one aluminum sheet and a unidirectional glass fiber (GF) reinforced polyamide 6 (PA6) basic structure with partial carbon fiber (CF) reinforcement. To create these heterogeneous FRP laminates, it is necessary to design and produce semi-finished textile-based products. Moreover, a warp knitting machine in conjunction with a warp thread offset unit was used to generate bionic inspired compounds. By the variation of stacking prior to the consolidation process of the hybrid laminate, an oriented CF reinforcement at the top and middle layer of the FRP is realized. In both cases the GFRP layer prevents contact between the aluminum and carbon fibers. In so doing, the high strength of carbon fibers can be transferred to the hybrid laminate in load directions with an active prevention of contact corrosion. The interface strength between thermoplastic and metal component was improved by a thermal spray coating on the aluminum sheet. Because of the high surface roughness and porosity, mechanical interlock was used to provide high interface strength without bonding agents between both components. The resulting mechanical properties of the hybrid laminates are evaluated by three point bending tests in different load directions. The effect of local fiber orientation and layer positioning on failure and deformation mechanism is additionally investigated by digital image correlation (DIC).

  7. FRP MODEL - VERSION 1.0 FOR ESTIMATING STYRENE EMISSIONS FROM FIBER-REINFORCED PLASTICS FABRICATION PROCESSES

    EPA Science Inventory

    This software estimates styrene emissions from the manufacture of fiber-reinforced plastics/composite (FRP/C) products. In using the model, the user first chooses the appropriate process: gel coating, resin sprayup, hand layup, etc. Choosing a process will cause the 'baseline' in...

  8. Development of a self-stressing NiTiNb shape memory alloy (SMA)/fiber reinforced polymer (FRP) patch

    NASA Astrophysics Data System (ADS)

    El-Tahan, M.; Dawood, M.; Song, G.

    2015-06-01

    The objective of this research is to develop a self-stressing patch using a combination of shape memory alloys (SMAs) and fiber reinforced polymer (FRP) composites. Prestressed carbon FRP patches are emerging as a promising alternative to traditional methods to repair cracked steel structures and civil infrastructure. However, prestressing these patches typically requires heavy and complex fixtures, which is impractical in many applications. This paper presents a new approach in which the prestressing force is applied by restraining the shape memory effect of NiTiNb SMA wires. The wires are subsequently embedded in an FRP overlay patch. This method overcomes the practical challenges associated with conventional prestressing. This paper presents the conceptual development of the self-stressing patch with the support of experimental observations. The bond between the SMA wires and the FRP is evaluated using pull-out tests. The paper concludes with an experimental study that evaluates the patch response during activation subsequent monotonic tensile loading. The results demonstrate that the self-stressing patch with NiTiNb SMA is capable of generating a significant prestressing force with minimal tool and labor requirements.

  9. 6. VIEW OF INTERIOR GLOVE BOX DURING CONSTRUCTION. GLOVE BOXES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF INTERIOR GLOVE BOX DURING CONSTRUCTION. GLOVE BOXES CONTAINED ALL PRODUCTION OPERATIONS AND WERE INTERCONNECTED BY CONVEYORS. (9/21/59) - Rocky Flats Plant, Plutonium Fabrication, Central section of Plant, Golden, Jefferson County, CO

  10. Looking Southwest at Reactor Box Furnaces With Reactor Boxes and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking Southwest at Reactor Box Furnaces With Reactor Boxes and Repossessed Uranium in Recycle Recovery Building - Hematite Fuel Fabrication Facility, Recycle Recovery Building, 3300 State Road P, Festus, Jefferson County, MO

  11. Thinking "Inside" the Box

    ERIC Educational Resources Information Center

    Jeffries, Carolyn

    2011-01-01

    The authors conducted a test to determine whether they could incorporate a discovery box into a preschool setting was successful. It stimulated the students' natural inquiry processes while promoting understanding of healthy foods and allowing for practice of fine-motor skills. It was easily incorporated into the curriculum and classroom space.…

  12. Hydrophobic, Porous Battery Boxes

    NASA Technical Reports Server (NTRS)

    Bragg, Bobby J.; Casey, John E., Jr.

    1995-01-01

    Boxes made of porous, hydrophobic polymers developed to contain aqueous potassium hydroxide electrolyte solutions of zinc/air batteries while allowing air to diffuse in as needed for operation. Used on other types of batteries for in-cabin use in which electrolytes aqueous and from which gases generated during operation must be vented without allowing electrolytes to leak out.

  13. EPA ExpoBox

    EPA Pesticide Factsheets

    EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases, mode

  14. Drawing inside the Box

    ERIC Educational Resources Information Center

    Franklin, Ranella

    2007-01-01

    When working with very young children and/or students with special needs, it is beneficial for teachers to think "outside the box" in order to preserve and enhance a child's natural curiosity. In an effort to teach young children to control their drawing tools, they are often presented with coloring book-type pages and instructed to "stay inside…

  15. Mystery Box Marvels

    ERIC Educational Resources Information Center

    Santos, Joel; Centurio, Tina

    2012-01-01

    What happens in the first week of school could very well set the stage for the rest of the school year. Setting high standards for science activities based in inquiry can start on the first day of science class and develop as the year unfolds. With the use of simple, readily available, inexpensive materials, an efficient mystery box lesson can be…

  16. Shoe Box Circuits

    ERIC Educational Resources Information Center

    Sandifer, Cody

    2009-01-01

    Students' eyes grow wide with wonder as they get a motor to work or make a bulb light for the first time. As these daunting feats of electrical engineering remind us, teaching electricity is invariably rewarding and worthwhile. In this inquiry-based science project, elementary students work in pairs to design and wire a shoe box "room" that meets…

  17. The Idea Box.

    ERIC Educational Resources Information Center

    National Association for the Education of Young Children, Washington, DC.

    Five pamphlets offer helpful ideas and instructions on teacher planning, learning environments, teaching with nature, a creative curriculum, and ideas for administrators in "The Idea Box," compiled by members of the Austin Association for the Education of Young Children. Each pamphlet contains useful information for working with young children.…

  18. Teaching with Box Tops.

    ERIC Educational Resources Information Center

    Raiser, Lynne; D'Zamko, Mary Elizabeth

    1984-01-01

    Using environmental materials (such as the phone book and placemats from fast food restaurants) can be a motivating way to teach learning disabled students skills and concepts, as shown in an approach to reading, math, science and nutrition, and social studies instruction using a JELL-O brand gelatin box. (CL)

  19. Thinking "Inside" the Box

    ERIC Educational Resources Information Center

    Jeffries, Carolyn

    2011-01-01

    The authors conducted a test to determine whether they could incorporate a discovery box into a preschool setting was successful. It stimulated the students' natural inquiry processes while promoting understanding of healthy foods and allowing for practice of fine-motor skills. It was easily incorporated into the curriculum and classroom space.…

  20. Teaching with Box Tops.

    ERIC Educational Resources Information Center

    Raiser, Lynne; D'Zamko, Mary Elizabeth

    1984-01-01

    Using environmental materials (such as the phone book and placemats from fast food restaurants) can be a motivating way to teach learning disabled students skills and concepts, as shown in an approach to reading, math, science and nutrition, and social studies instruction using a JELL-O brand gelatin box. (CL)

  1. Shoe Box Circuits

    ERIC Educational Resources Information Center

    Sandifer, Cody

    2009-01-01

    Students' eyes grow wide with wonder as they get a motor to work or make a bulb light for the first time. As these daunting feats of electrical engineering remind us, teaching electricity is invariably rewarding and worthwhile. In this inquiry-based science project, elementary students work in pairs to design and wire a shoe box "room" that meets…

  2. Mystery Box Marvels

    ERIC Educational Resources Information Center

    Santos, Joel; Centurio, Tina

    2012-01-01

    What happens in the first week of school could very well set the stage for the rest of the school year. Setting high standards for science activities based in inquiry can start on the first day of science class and develop as the year unfolds. With the use of simple, readily available, inexpensive materials, an efficient mystery box lesson can be…

  3. Drawing inside the Box

    ERIC Educational Resources Information Center

    Franklin, Ranella

    2007-01-01

    When working with very young children and/or students with special needs, it is beneficial for teachers to think "outside the box" in order to preserve and enhance a child's natural curiosity. In an effort to teach young children to control their drawing tools, they are often presented with coloring book-type pages and instructed to "stay inside…

  4. Cereal Box Totems.

    ERIC Educational Resources Information Center

    Jones, AnnMarie

    2002-01-01

    Presents a multicultural project used with fourth-grade students in which they created a three-dimensional totem pole using leftover cereal boxes. Discusses in detail how to create the totem pole. Explains that students learned about Northwest American Indians in class. (CMK)

  5. "Can" the Black Box

    ERIC Educational Resources Information Center

    Lestingi, Francis S.

    1975-01-01

    Describes the use of the "Arcane (mysterious) Can" which is a "tin" can which is permanently sealed, both air- and water-tight, by means of a home canning device. The canning procedure permits the use of a large variety of materials which can not be utilized in the ordinary mystery box. This Can activity is valuable for…

  6. Ocular complications of boxing.

    PubMed

    Bianco, M; Vaiano, A S; Colella, F; Coccimiglio, F; Moscetti, M; Palmieri, V; Focosi, F; Zeppilli, P; Vinger, P F

    2005-02-01

    To investigate the prevalence of ocular injuries in a large population of boxers over a period of 16 years, in particular, the most severe lesions that may be vision threatening. Clinical records of the medical archive of the Italian Boxing Federation were analysed. A total of 1032 boxers were examined from February 1982 to October 1998. A complete ophthalmological history was available for 956, who formed the study population (a total of 10 697 examinations). The following data were collected: age when started boxing; duration of competitive boxing career (from the date of the first bout); weight category; a thorough ocular history. The following investigations were carried out: measurement of visual acuity and visual fields, anterior segment inspection, applanation tonometry, gonioscopy, and examination of ocular fundus. Eighty age matched healthy subjects, who had never boxed, formed the control group. Of the 956 boxers examined, 428 were amateur (44.8%) and 528 professional (55.2%). The median age at first examination was 23.1 (4.3) years (range 15-36). The prevalence of conjunctival, corneal, lenticular, vitreal, ocular papilla, and retinal alterations in the study population was 40.9% compared with 3.1% in the control group (p< or =0.0001). The prevalence of serious ocular findings (angle, lens, macula, and peripheral retina alterations) was 5.6% in boxers and 3.1% in controls (NS). Boxing does not result in a higher prevalence of severe ocular lesions than in the general population. However, the prevalence of milder lesions (in particular with regard to the conjunctiva and cornea) is noteworthy, justifying the need for adequate ophthalmological surveillance.

  7. Ocular complications of boxing

    PubMed Central

    Bianco, M; Vaiano, A; Colella, F; Coccimiglio, F; Moscetti, M; Palmieri, V; Focosi, F; Zeppilli, P; Vinger, P

    2005-01-01

    Objectives: To investigate the prevalence of ocular injuries in a large population of boxers over a period of 16 years, in particular, the most severe lesions that may be vision threatening. Methods: Clinical records of the medical archive of the Italian Boxing Federation were analysed. A total of 1032 boxers were examined from February 1982 to October 1998. A complete ophthalmological history was available for 956, who formed the study population (a total of 10 697 examinations). The following data were collected: age when started boxing; duration of competitive boxing career (from the date of the first bout); weight category; a thorough ocular history. The following investigations were carried out: measurement of visual acuity and visual fields, anterior segment inspection, applanation tonometry, gonioscopy, and examination of ocular fundus. Eighty age matched healthy subjects, who had never boxed, formed the control group. Results: Of the 956 boxers examined, 428 were amateur (44.8%) and 528 professional (55.2%). The median age at first examination was 23.1 (4.3) years (range 15–36). The prevalence of conjunctival, corneal, lenticular, vitreal, ocular papilla, and retinal alterations in the study population was 40.9% compared with 3.1% in the control group (p⩽0.0001). The prevalence of serious ocular findings (angle, lens, macula, and peripheral retina alterations) was 5.6% in boxers and 3.1% in controls (NS). Conclusions: Boxing does not result in a higher prevalence of severe ocular lesions than in the general population. However, the prevalence of milder lesions (in particular with regard to the conjunctiva and cornea) is noteworthy, justifying the need for adequate ophthalmological surveillance. PMID:15665199

  8. Evaluation of RC Bridge Piers Retrofitted using Fiber-Reinforced Polymer (FRP)

    SciTech Connect

    Shayanfar, M. A.; Zarrabian, M. S.

    2008-07-08

    For many long years, steel reinforcements have been considered as the only tool for concrete confinements and studied widely, but nowadays application of Fiber Reinforced Polymer (FRP) as an effective alternative is well appreciated. Many bridges have been constructed in the past that are necessary to be retrofitted for resisting against the earthquake motions. The objective of this research is evaluation of nonlinear behavior of RC bridge piers. Eight RC bridge piers have been modeled by ABAQUS software under micromechanical model for homogeneous anisotropic fibers. Also the Bilinear Confinement Model by Nonlinear Transition Zone of Mirmiran has been considered. Then types and angles of fibers and their effects on the final responses were evaluated. Finally, effects of retrofitting are evaluated and some suggestions presented.

  9. Experimetal study on the FRP-concrete bond behavior under repeated loadings

    NASA Astrophysics Data System (ADS)

    Lee, J.-Y.; Yi, C.-K.; Cheong, Y.-G.

    2009-11-01

    In this study, the effects of repeated loads on the FRP-concrete bond strength were investigated experimentally by direct pull out tests according to CSA S806-02. A conventional reinforcing steel bar and two types of glass-fiber-reinforced plastic (GFRP) bars were embedded in concrete and tested under four different loading patterns. The bond strength-slip curves of the bars were obtained and analyzed. The results showed that the maximum bond strengths under the repeated loads differed from those obtained under monotonic ones. In addition, noticeable differences in degradation of the bond strength with respect to the magnitude of slip were observed between the different bar types tested. On the basis of an image analysis of failure surfaces, they were attributed to the different bond failure mechanisms associated with the steel and GFRP bars.

  10. Hermit Points on a Box

    ERIC Educational Resources Information Center

    Hess, Richard; Grinstead, Charles; Grindstead, Marshall; Bergstrand, Deborah

    2008-01-01

    Suppose that we are given a rectangular box in 3-space. Given any two points on the surface of this box, we can define the surface distance between them to be the length of the shortest path between them on the surface of the box. This paper determines the pairs of points of maximum surface distance for all boxes. It is often the case that these…

  11. Hermit Points on a Box

    ERIC Educational Resources Information Center

    Hess, Richard; Grinstead, Charles; Grindstead, Marshall; Bergstrand, Deborah

    2008-01-01

    Suppose that we are given a rectangular box in 3-space. Given any two points on the surface of this box, we can define the surface distance between them to be the length of the shortest path between them on the surface of the box. This paper determines the pairs of points of maximum surface distance for all boxes. It is often the case that these…

  12. Making Connections with Memory Boxes.

    ERIC Educational Resources Information Center

    Whatley, April

    2000-01-01

    Addresses the use of children's literature within the social studies classroom on the topic of memory boxes. Includes discussions of four books: (1) "The Littlest Angel" (Charles Tazewell); (2) "The Hundred Penny Box" (Sharon Bell Mathis); (3) "Wilfrid Gordon McDonald Partridge" (Mem Fox); and (4) "The Memory Box" (Mary Bahr). (CMK)

  13. Making Connections with Memory Boxes.

    ERIC Educational Resources Information Center

    Whatley, April

    2000-01-01

    Addresses the use of children's literature within the social studies classroom on the topic of memory boxes. Includes discussions of four books: (1) "The Littlest Angel" (Charles Tazewell); (2) "The Hundred Penny Box" (Sharon Bell Mathis); (3) "Wilfrid Gordon McDonald Partridge" (Mem Fox); and (4) "The Memory Box" (Mary Bahr). (CMK)

  14. Multicultural and Nonsexist Prop Boxes.

    ERIC Educational Resources Information Center

    Boutte, Gloria S.; And Others

    1996-01-01

    Discusses how prop boxes enhance learning and are resources in multicultural and nonsexist primary education, focusing on play, experimentation, and cooperation. Examines integration of prop boxes into the curricula and activities, and presents examples of generic and specific multicultural prop boxes that incorporate art, music, foods,…

  15. The Electronic Battle Box

    NASA Astrophysics Data System (ADS)

    Gouin, Denis; Turcotte, Guy; Lebel, Eric; Gilbert, Annie

    2000-08-01

    The Electronic Battle Box is an integrated suite of planning and decision-aid tools specially designed to facilitate Canadian Armed Force Officers during their training and during their tasks of preparing and conducting military operations. It is the result of a collaborative effort between the Defence Research Establishment Valcartier, the Directorate of Army Doctrine (DAD), the Directorate of Land Requirements (DLR), the G4 staff of 1Cdn Div HQ and CGI Information and Management Consultants Inc. Distributed on CD-ROM, the Electronic Battle Box contains efficient and user-friendly tools that significantly reduce the planning time for military operations and ensure staff officers a better focus on significant tasks. Among the tools are an OrBat Browser and an Equipment Browser allowing to view and edit military organizations, a Task Browser providing facilities to prepare plans using Gantt charts, a Logistic Planner allowing to estimate supply requirements applying complex calculations, and Road, Air and Rail Movement Planners. EBB also provides staff officers with a large set of doctrinal documents in an electronic format. This paper provides an overview of the various tools of the Electronic Battle Box.

  16. Learning with Box Kernels.

    PubMed

    Melacci, Stefano; Gori, Marco

    2013-04-12

    Supervised examples and prior knowledge on regions of the input space have been profitably integrated in kernel machines to improve the performance of classifiers in different real-world contexts. The proposed solutions, which rely on the unified supervision of points and sets, have been mostly based on specific optimization schemes in which, as usual, the kernel function operates on points only. In this paper, arguments from variational calculus are used to support the choice of a special class of kernels, referred to as box kernels, which emerges directly from the choice of the kernel function associated with a regularization operator. It is proven that there is no need to search for kernels to incorporate the structure deriving from the supervision of regions of the input space, since the optimal kernel arises as a consequence of the chosen regularization operator. Although most of the given results hold for sets, we focus attention on boxes, whose labeling is associated with their propositional description. Based on different assumptions, some representer theorems are given which dictate the structure of the solution in terms of box kernel expansion. Successful results are given for problems of medical diagnosis, image, and text categorization.

  17. Learning with box kernels.

    PubMed

    Melacci, Stefano; Gori, Marco

    2013-11-01

    Supervised examples and prior knowledge on regions of the input space have been profitably integrated in kernel machines to improve the performance of classifiers in different real-world contexts. The proposed solutions, which rely on the unified supervision of points and sets, have been mostly based on specific optimization schemes in which, as usual, the kernel function operates on points only. In this paper, arguments from variational calculus are used to support the choice of a special class of kernels, referred to as box kernels, which emerges directly from the choice of the kernel function associated with a regularization operator. It is proven that there is no need to search for kernels to incorporate the structure deriving from the supervision of regions of the input space, because the optimal kernel arises as a consequence of the chosen regularization operator. Although most of the given results hold for sets, we focus attention on boxes, whose labeling is associated with their propositional description. Based on different assumptions, some representer theorems are given that dictate the structure of the solution in terms of box kernel expansion. Successful results are given for problems of medical diagnosis, image, and text categorization.

  18. Promoter hypermethylation profile of RASSF1A, FHIT, and sFRP1 in intracranial primitive neuroectodermal tumors.

    PubMed

    Chang, Qing; Pang, Jesse Chung-Sean; Li, Kay Ka Wai; Poon, Wai Sang; Zhou, Liangfu; Ng, Ho-Keung

    2005-12-01

    Medulloblastomas (MBs) and supratentorial primitive neuroectodermal tumors (SPNETs) are histologically alike intracranial PNETs found in different anatomical locations of the brain. Current evidence suggests that hypermethylation of promoter CpG islands is a common epigenetic event in a variety of human cancers. The aim of this study was to investigate whether promoter hypermethylation of putative tumor suppressor genes was involved in both types of intracranial PNETs. We examined the methylation status at promoter regions of RASSF1A, FHIT, and sFRP1 by methylation-specific polymerase chain reaction in a cohort of 25 primary MBs, 9 primary SPNETs, and 3 MB and 2 SPNET cell lines. Our results revealed no promoter hypermethylation of RASSF1A, FHIT, and sFRP1 in 2 normal cerebellar and 5 normal cerebral tissue specimens examined. In contrast, promoter hypermethylation of RASSF1A was detected in 100% of primary MBs, 67% (6/9) of primary SPNETs, and all PNET cell lines. The frequency of promoter hypermethylation of RASSF1A was significantly lower in SPNETs than in MBs (Fisher exact test, P = .014). Treatment of RASSF1A-deficient PNET cell lines with 5-aza-2'deoxycytidine, a demethylating agent, restored RASSF1A expression, providing evidence that promoter hypermethylation contributes to transcriptional silencing. In addition, promoter hypermethylation of FHIT and sFRP1 was detected in 22% (2/9) and 11% (1/9) of SPNETs, respectively, but not in any MBs studied. In conclusion, our study demonstrates that promoter hypermethylation of RASSF1A is a common event in intracranial PNETs, whereas FHIT and sFRP1 are epigenetically affected in a fraction of SPNETs.

  19. Binding of sFRP-3 to EGF in the Extra-Cellular Space Affects Proliferation, Differentiation and Morphogenetic Events Regulated by the Two Molecules

    PubMed Central

    Tosoni, Daniela; Borello, Ugo; Sampaolesi, Maurilio; Sciorati, Clara; Cannata, Stefano; Clementi, Emilio; Brunelli, Silvia; Cossu, Giulio

    2008-01-01

    Background sFRP-3 is a soluble antagonist of Wnts, widely expressed in developing embryos. The Wnt gene family comprises cysteine-rich secreted ligands that regulate cell proliferation, differentiation, organogenesis and oncogenesis of different organisms ranging from worms to mammals. In the canonical signal transduction pathway Wnt proteins bind to the extracellular domain of Frizzled receptors and consequently recruit Dishevelled (Dsh) to the cell membrane. In addition to Wnt membrane receptors belonging to the Frizzled family, several other molecules have been described which share homology in the CRD domain and lack the putative trans-membrane domain, such as sFRP molecules (soluble Frizzled Related Protein). Among them, sFRP-3 was originally isolated from bovine articular cartilage and also as a component of the Spemann organizer. sFRP-3 blocks Wnt-8 induced axis duplication in Xenopus embryos and binds to the surface of cells expressing a membrane-anchored form of Wnt-1. Injection of sFRP-3 mRNA blocks expression of XMyoD mRNA and leads to embryos with enlarged heads and shortened trunks. Methodology/Principal Findings Here we report that sFRP-3 specifically blocks EGF-induced fibroblast proliferation and foci formation. Over-expression of sFRP-3 reverts EGF-mediated inhibition of hair follicle development in the mouse ectoderm while its ablation in Xenopus maintains EGF-mediated inhibition of ectoderm differentiation. Conversely, over-expression of EGF reverts the inhibition of somitic myogenesis and axis truncation in Xenopus and mouse embryos caused by sFRP-3. In vitro experiments demonstrated a direct binding of EGF to sFRP-3 both on heparin and on the surface of CHO cells where the molecule had been membrane anchored. Conclusions/Significance sFRP-3 and EGF reciprocally inhibit their effects on cell proliferation, differentiation and morphogenesis and indeed are expressed in contiguous domains of the embryo, suggesting that in addition to their

  20. Concrete Infill Monitoring in Concrete-Filled FRP Tubes Using a PZT-Based Ultrasonic Time-of-Flight Method.

    PubMed

    Luo, Mingzhang; Li, Weijie; Hei, Chuang; Song, Gangbing

    2016-12-07

    Concrete-filled fiber-reinforced polymer tubes (CFFTs) have attracted interest for their structural applications in corrosive environments. However, a weak interfacial strength between the fiber-reinforced polymer (FRP) tube and the concrete infill may develop due to concrete shrinkage and inadequate concrete compaction during concrete casting, which will destroy the confinement effect and thereby reduce the load bearing capacity of a CFFT. In this paper, the lead zirconate titanate (PZT)-based ultrasonic time-of-flight (TOF) method was adopted to assess the concrete infill condition of CFFTs. The basic idea of this method is that the velocity of the ultrasonic wave propagation in the FRP material is about half of that in concrete material. Any voids or debonding created along the interface between the FRP tube and the concrete will delay the arrival time between the pairs of PZT transducers. A comparison of the arrival times of the PZT pairs between the intact and the defected CFFT was made to assess the severity of the voids or the debonding. The feasibility of the methodology was analyzed using a finite-difference time-domain-based numerical simulation. Experiments were setup to validate the numerical results, which showed good agreement with the numerical findings. The results showed that the ultrasonic time-of-flight method is able to detect the concrete infill condition of CFFTs.

  1. Concrete Infill Monitoring in Concrete-Filled FRP Tubes Using a PZT-Based Ultrasonic Time-of-Flight Method

    PubMed Central

    Luo, Mingzhang; Li, Weijie; Hei, Chuang; Song, Gangbing

    2016-01-01

    Concrete-filled fiber-reinforced polymer tubes (CFFTs) have attracted interest for their structural applications in corrosive environments. However, a weak interfacial strength between the fiber-reinforced polymer (FRP) tube and the concrete infill may develop due to concrete shrinkage and inadequate concrete compaction during concrete casting, which will destroy the confinement effect and thereby reduce the load bearing capacity of a CFFT. In this paper, the lead zirconate titanate (PZT)-based ultrasonic time-of-flight (TOF) method was adopted to assess the concrete infill condition of CFFTs. The basic idea of this method is that the velocity of the ultrasonic wave propagation in the FRP material is about half of that in concrete material. Any voids or debonding created along the interface between the FRP tube and the concrete will delay the arrival time between the pairs of PZT transducers. A comparison of the arrival times of the PZT pairs between the intact and the defected CFFT was made to assess the severity of the voids or the debonding. The feasibility of the methodology was analyzed using a finite-difference time-domain-based numerical simulation. Experiments were setup to validate the numerical results, which showed good agreement with the numerical findings. The results showed that the ultrasonic time-of-flight method is able to detect the concrete infill condition of CFFTs. PMID:27941617

  2. Development of FRP composite structural biomaterials: ultimate strength of the fiber/matrix interfacial bond in in vivo simulated environments.

    PubMed

    Latour, R A; Black, J

    1992-05-01

    Fiber reinforced polymer (FRP) composites are being developed as alternatives to metals for structural orthopedic implant applications. FRP composite fracture behavior and environmental interactions are distinctly different from those which occur in metals. These differences must be accounted for in the design and evaluation of implant performance. Fiber/matrix interfacial bond strength in a FRP composite is known to strongly influence fracture behavior. The interfacial bond strength of four candidate fiber/matrix combinations (carbon fiber/polycarbonate, carbon fiber/polysulfone, polyaramid fiber/polycarbonate, polyaramid fiber/polysulfone) were investigated at 37 degrees C in dry and in vivo simulated (saline, exudate) environments. Ultimate bond strength was measured by a single fiber-microdroplet pull-out test. Dry bond strengths were significantly decreased following exposure to either saline or exudate with bond strength loss being approximately equal in both the saline and exudate. Bond strength loss is attributed to the diffusion of water and/or salt ions into the sample and their interaction with interfacial bonding. Because bond degradation is dependent upon diffusion, diffusional equilibrium must be obtained in composite test samples before the full effect of the test environment upon composite mechanical behavior can be determined.

  3. Wnt, Frizzled, and sFRP gene expression patterns during gastrulation in the starfish Patiria (Asterina) pectinifera.

    PubMed

    Kawai, Narudo; Kuraishi, Ritsu; Kaneko, Hiroyuki

    2016-05-01

    By the initial phase of gastrulation, Wnt pathway regulation mediates endomesoderm specification and establishes the animal-vegetal axis, thereby leading to proper gastrulation in starfish. To provide insight into the ancestral mechanism regulating deuterostome gastrulation, we identified the gene expression patterns of Wnt, Frizzled (Fz), and secreted frizzled-related protein (sFRP) family genes, which play a role in the initial stage of the Wnt pathway, in starfish Patiria (Asterina) pectinifera embryos using whole mount in situ hybridization. We identified ten Wnt, four Fz, and two sFRP paralogues. From the hatching blastula to the late gastrula stage, the majority of the Wnt genes and both Fz5/8 and sFRP1/5 were expressed in the posterior and anterior half of the embryo, respectively. Wnt8, Fz1, and Fz4 showed restricted expression in the lateral ectoderm. On the other hand, several genes were expressed de novo in the restricted domain of the archenteron at the late gastrula stage. These results suggest that the canonical and/or non-canonical Wnt pathway might implicate endomesoderm specification, anterior-posterior axis establishment, anterior-posterior patterning, and archenteron morphogenesis in the developmental context of starfish embryos. From comparison with the expression patterns observed in Patria miniata, we consider that the Wnt pathway is conserved among starfishes. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Technique for reduction of mechanical losses in AC superconducting coils due to thermal expansion properties of various FRP bobbins

    NASA Astrophysics Data System (ADS)

    Sekine, N.; Tada, S.; Higuchi, T.; Furumura, Y.; Takao, T.; Yamanaka, A.

    2005-10-01

    We reported about reduction of mechanical losses in AC superconducting coils. The method is the use of FRP bobbins fabricated with special fibers. Since their FRPs have negative thermal expansion coefficient to the fiber direction, the FRP bobbins expand to the circumferential direction during cooling down. In case of the superconducting coils with such FRP bobbins, the winding tensions do not decrease during cooling down. Therefore, the mechanical losses are reduced by the suppression of wire's vibration. Their special FRPs are a Dyneema® fiber reinforced plastic (DFRP), a Dyneema and glass fiber reinforced plastic (DGFRP), and a Zylon® fiber reinforced plastic (ZFRP). These materials have negative thermal expansion coefficient to the fiber direction, however, the amplitudes of thermal expansion are various by the quantity or quality of the fiber. In this paper, the values of thermal expansion were actually measured, and it was discussed about the influence on the mechanical losses. At the experimental results, the mechanical loss was small, so that the thermal strain to the circumferential direction on the coil was large. Moreover, in case of the coils with sufficiently strong winding tensions at coil-operating temperature, the mechanical losses vanished.

  5. Towards a better understanding of the mechanisms controlling the durability of FRP composites in concrete

    NASA Astrophysics Data System (ADS)

    Kamal, Abu Sayed Md

    Wide adoption by the construction industry of Fibre Reinforced Polymer (FRP) rebars - a relatively recent construction material that offers numerous advantages of corrosion resistance, higher strength, lighter weight, etc. over conventional reinforcing materials for concrete, such as steel - is at least partially impeded due to a lack of an effective long term in-service performance prediction model and relatively high initial costs. A reliable service life prediction model for FRP composites in concrete depends on a clear understanding of the transport mechanisms of potentially harmful chemical species into the FRP composites and their subsequent contribution to any potentially active degradation mechanism(s). To identify which mechanisms control the degradation of Glass Fibre Reinforced Polymers (GFRP) in alkaline environments, GFRP rebars were immersed into simulated concrete pore solutions and subjected to accelerated ageing tests (Phase 1). The conditioned samples were analyzed by various electron microscopy (SEM, EDS) and spectroscopic methods (FTIR). Analyses of these tests revealed that fibre-matrix debonding took place in few samples exposed to 75 °C (the highest temperature considered in this study), and tested after one year, despite the fact that the glass fibres and polymer matrix remained essentially intact and that no penetration of alkalis into the GFRP rebars was observed. Hence, this study shows that the Vinyl Ester (VE) polymer matrix used acts as an effective semi-permeable membrane by allowing the penetration of water while blocking alkali ions. The findings showing that most of the damage seems to be confined to the fibre-matrix interphase (or interface), under the considered test conditions, stimulated an investigation on the effects of sizing on the strength retention and water up-take of GFRP rebars in Phase 2 of the testing program. In order to study the effects of sizing on the properties of GFRP rebars, GFRP custom plane sheets with

  6. Estimating Landscape Fire Particulate Matter (PM) Emissions over Southern Africa using MSG-SEVIRI Fire Radiative Power (FRP) and MODIS Aerosol Optical Thickness Observations

    NASA Astrophysics Data System (ADS)

    Mota, Bernardo; Wooster, Martin J.

    2016-04-01

    The approach to estimating landscape fire fuel consumption based on the remotely sensed fire radiative power (FRP) thermal energy release rate, as opposed to burned area, is now relatively widely used in studies of fire emissions, including operationally within the Copernicus Atmosphere Monitoring Service (CAMS). Nevertheless, there are still limitations to the approach, including uncertainties associated with using only the few daily overpasses typically provided by polar orbiting satellite systems, the conversion between FRP and smoke emissions, and the increased likelihood that the more frequent data from geostationary systems fails to detect the (probably highly numerous) smaller (i.e. low FRP) component of a regions fire regime. In this study, we address these limitations to directly estimate fire emissions of Particular Matter (PM; or smoke aerosols) by presenting an approach combining the "bottom-up" FRP observations available every 15 minutes across Africa from the Meteosat Spinning Enhanced Visible and Infrared Imager (SEVIRI) Fire Radiative Product (FRP) processed at the EUMETSAT LSA SAF, and the "top-down" aerosol optical thickness (AOT) measures of the fire plumes themselves as measured by the Moderate-resolution Imaging Spectro-radiometer (MODIS) sensors aboard the Terra (MOD04_L2) and Aqua (MYD04_L2) satellites. We determine PM emission coefficients that relate directly to FRP measures by combining these two datasets, and the use of the almost continuous geostationary FRP observations allows us to do this without recourse to (uncertain) data on wind speed at the (unknown) height of the matching plume. We also develop compensation factors to address the detection limitations of small/low intensity (low FRP) fires, and remove the need to estimate fuel consumption by going directly from FRP to PM emissions. We derive the smoke PM emissions coefficients per land cover class by comparing the total fire radiative energy (FRE) released from individual fires

  7. Small, Lightweight, Collapsible Glove Box

    NASA Technical Reports Server (NTRS)

    James, Jerry

    2009-01-01

    A small, lightweight, collapsible glove box enables its user to perform small experiments and other tasks. Originally intended for use aboard a space shuttle or the International Space Station (ISS), this glove box could also be attractive for use on Earth in settings in which work space or storage space is severely limited and, possibly, in which it is desirable to minimize weight. The development of this glove box was prompted by the findings that in the original space-shuttle or ISS setting, (1) it was necessary to perform small experiments in a large general-purpose work station, so that, in effect, they occupied excessive space; and it took excessive amounts of time to set up small experiments. The design of the glove box reflects the need to minimize the space occupied by experiments and the time needed to set up experiments, plus the requirement to limit the launch weight of the box and the space needed to store the box during transport into orbit. To prepare the glove box for use, the astronaut or other user has merely to insert hands through the two fabric glove ports in the side walls of the box and move two hinges to a locking vertical position (see figure). The user could do this while seated with the glove box on the user fs lap. When stowed, the glove box is flat and has approximately the thickness of two pieces of 8-in. (.20 cm) polycarbonate.

  8. Projection optics box

    DOEpatents

    Hale, Layton C.; Malsbury, Terry; Hudyma, Russell M.; Parker, John M.

    2000-01-01

    A projection optics box or assembly for use in an optical assembly, such as in an extreme ultraviolet lithography (EUVL) system using 10-14 nm soft x-ray photons. The projection optics box utilizes a plurality of highly reflective optics or mirrors, each mounted on a precision actuator, and which reflects an optical image, such as from a mask, in the EUVL system onto a point of use, such as a target or silicon wafer, the mask, for example, receiving an optical signal from a source assembly, such as a developed from laser system, via a series of highly reflective mirrors of the EUVL system. The plurality of highly reflective optics or mirrors are mounted in a housing assembly comprised of a series of bulkheads having wall members secured together to form a unit construction of maximum rigidity. Due to the precision actuators, the mirrors must be positioned precisely and remotely in tip, tilt, and piston (three degrees of freedom), while also providing exact constraint.

  9. Development and characterization of soy-based epoxy resins and pultruded FRP composites

    NASA Astrophysics Data System (ADS)

    Zhu, Jiang

    This dissertation focuses on the development, manufacture and characterization of novel soy-based epoxy FRP composites. Use of alternative epoxy resin systems derived from a renewable resource holds potential for low cost raw materials for the polymer and composite industries. Epoxidized Allyl Soyate (EAS) and Epoxidized Methyl Soyate (EMS) were developed from soybean oil with two chemical modification procedures: transesterification and epoxidation. This research investigates the curing characteristics and thermal and mechanical properties of the neat soyate resin systems. The derived soyate resins have higher reactivity and superior performance compared to commercially available epoxidized soybean oil. An efficient two-step curing method was developed in order to utilize these soyate resins to their full potential. The epoxy co-resin systems with varied soyate resin content were successfully used to fabricate composite material through pultrusion. The pultrusion resin systems with 30 wt% soyate resins yielded improved, or comparable mechanical properties with neat commercial resins. A finite element analysis of the heat transfer and curing process was performed to study the processing characterization on glass/epoxy composite pultrusion. This model can be used to establish baseline process variables and will benefit subsequent optimization. This research demonstrates that soy-based resins, especially EAS, show considerable promise as an epoxy resin supplement for use in polymer and composite structural applications. The new products derived from soybean oil can provide competitive performance, low cost and environmental advantages.

  10. Unmanned Ground Vehicle for Autonomous Non-Destructive Testing of FRP Bridge Decks

    NASA Astrophysics Data System (ADS)

    Klinkhachorn, P.; Mercer, A. Scott; Halabe, Udaya B.; GangaRao, Hota V. S.

    2007-03-01

    Current non-destructive techniques for defect analysis of FRP bridge decks have a narrow scope. These techniques are very good at detecting certain types of defects but are not robust enough to detect all defects by themselves. For example, infrared thermography (IRT) can detect air filled defects and Ground Penetrating Radar (GPR) is good at detecting water filled ones. These technologies can be combined to create a more robust defect detection scheme. To accomplish this, an Unmanned Ground Vehicle (UGV) has been designed that incorporates both IR and GPR analysis to create a comprehensive defect map of a bridge deck. The UGV autonomously surveys the deck surface and acquires data. The UGV has two 1.5 GHz ground coupled GPR antennas that are mounted on the front of the UGV to collect GPR data. It also incorporates an active heating source and a radiometric IR camera to capture IR images of the deck, even in less than ideal weather scenarios such as cold cloudy days. The UGV is designed so that it can collect data in an assembly line fashion. It moves in 1 foot increments. When moving, it collects GPR data from the two antennas. When it stops it heats a section of the deck. The next time it stops to heat a section, the IR camera is analyzing the preheated deck section while preparing for the next section. Because the data is being continually collected using this method, the UGV can survey the entire deck in an efficient and timely manner.

  11. A strategy for enhancing shear strength and bending strength of FRP laminate using MWCNTs

    NASA Astrophysics Data System (ADS)

    Rawat, Prashant; Singh, K. K.

    2016-09-01

    Multi-wall carbon nanotubes (MWCNTs) promises to enhance mechanical properties exceptionally when it is doped with fiber reinforced polymer (FRP) composite. Glass fiber symmetrical laminate with eight layers of 4.0 mm thickness was fabricated by hand lay-up technique assisted by vacuum bagging method. Ply orientations for symmetrical laminate used [(0,90)/(+45,-45)/(+45,-45)/(0,90)//(90,0)/(+45,-45)/(+45,-45)/(90,0)]. MWCNTs reinforced three different samples (0 wt.%, 0.5 wt.% and 0.75 wt.% by weight) were tested on universal testing machine (UTM). Short beam strength test and inter laminar shear strength (ILSS) calculation have been done according to ASTM D2344 and ASTM D7264. UTM having maximum load capacity of 50 KN with loading rate of 0.1 mm/min to 50 mm/min was used for mechanical testing. Testing results justified that by adding 0.50 wt.% MWCNTs in symmetrical GFRP laminate can enhance inter laminar shear strength by 13.66% and bending strength by 44.22%.

  12. The Classroom Animal: Box Turtles.

    ERIC Educational Resources Information Center

    Kramer, David C.

    1986-01-01

    Provides basic information on the anatomy, physiology, behaviors, and distribution patterns of the box turtle. Offers suggestions for the turtle's care and maintenance in a classroom environment. (ML)

  13. The Classroom Animal: Box Turtles.

    ERIC Educational Resources Information Center

    Kramer, David C.

    1986-01-01

    Provides basic information on the anatomy, physiology, behaviors, and distribution patterns of the box turtle. Offers suggestions for the turtle's care and maintenance in a classroom environment. (ML)

  14. Meteosat SEVIRI Fire Radiative Power (FRP) products from the Land Surface Analysis Satellite Applications Facility (LSA SAF) - Part 1: Algorithms, product contents and analysis

    NASA Astrophysics Data System (ADS)

    Wooster, M. J.; Roberts, G.; Freeborn, P. H.; Xu, W.; Govaerts, Y.; Beeby, R.; He, J.; Lattanzio, A.; Mullen, R.

    2015-06-01

    Characterising changes in landscape scale fire activity at very high temporal resolution is best achieved using thermal observations of actively burning fires made from geostationary Earth observation (EO) satellites. Over the last decade or more, a series of research and/or operational "active fire" products have been developed from these types of geostationary observations, often with the aim of supporting the generation of data related to biomass burning fuel consumption and trace gas and aerosol emission fields. The Fire Radiative Power (FRP) products generated by the Land Surface Analysis Satellite Applications Facility (LSA SAF) from data collected by the Meteosat Second Generation (MSG) Spinning Enhanced Visible and Infrared Imager (SEVIRI) are one such set of products, and are freely available in both near real-time and archived form. Every 15 min, the algorithms used to generate these products identify and map the location of new SEVIRI observations containing actively burning fires, and characterise their individual rates of radiative energy release (fire radiative power; FRP) that is believed proportional to rates of biomass consumption and smoke emission. The FRP-PIXEL product contains the highest spatial resolution FRP dataset, delivered for all of Europe, northern and southern Africa, and part of South America at a spatial resolution of 3 km (decreasing away from the west African sub-satellite point) at the full 15 min temporal resolution. The FRP-GRID product is an hourly summary of the FRP-PIXEL data, produced at a 5° grid cell size and including simple bias adjustments for meteorological cloud cover and for the regional underestimation of FRP caused, primarily, by the non-detection of low FRP fire pixels at SEVIRI's relatively coarse pixel size. Here we describe the enhanced geostationary Fire Thermal Anomaly (FTA) algorithm used to detect the SEVIRI active fire pixels, and detail methods used to deliver atmospherically corrected FRP information

  15. 2. UPPER NOTTINGHAM MINE, WOODEN BOXES. BOXES ARE LOCATED APPROXIMATELY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. UPPER NOTTINGHAM MINE, WOODEN BOXES. BOXES ARE LOCATED APPROXIMATELY 10 YARDS TO THE RIGHT AND DOWNSLOPE OF THE ADIT IN ID-31-F-1. CAMERA IS POINTED EAST-SOUTHEAST. - Florida Mountain Mining Sites, Upper Nottingham Mine, West face of Florida Mountain, head of Jacobs Gulch, Silver City, Owyhee County, ID

  16. Antagonizing canonical Wnt signaling pathway by recombinant human sFRP4 purified from E. coli and its implications in cancer therapy.

    PubMed

    Ghoshal, Archita; Ghosh, Siddhartha Sankar

    2016-07-01

    The Wnt signaling pathway plays a predominant role in aberrant proliferation in myriad of cancers. In non-cancerous cells, Wnts are blocked by the secreted frizzled-related proteins (sFRPs) that are generally downregulated in cancer cells. We have purified and characterized bacterially expressed glutathione S-transferase-tagged SFRP4 from a novel clone generated from human cell origin. Cervical cancer (HeLa) and lung cancer (A549) cells, in which Wnt and associated genes were found to be expressed, were treated with the purified recombinant sFRP4, which revealed a significant dose-dependent cell growth inhibition up to 40 %. The current investigation on functionality of this bacterially produced recombinant sFRP4 in arresting cancer cell proliferation is the first of its kind, where G2/M phase arrest and early apoptosis were evident. Increase in phosphorylated β-catenin in sFRP4 treatment indicated inhibition of Wnt pathway, which was further confirmed by downregulation of pro-proliferative genes, namely cyclin D1, c-myc, and survivin. Functional activity of recombinant sFRP4 was further exploited in co-therapy module with chemotherapeutic drugs to decipher molecular events. Collectively, our study on purified recombinant sFRP4 from bacterial host holds great promise in targeting Wnt signaling for exploring new strategies to combat cancer.

  17. More box codes

    NASA Technical Reports Server (NTRS)

    Solomon, G.

    1992-01-01

    A new investigation shows that, starting from the BCH (21,15;3) code represented as a 7 x 3 matrix and adding a row and column to add even parity, one obtains an 8 x 4 matrix (32,15;8) code. An additional dimension is obtained by specifying odd parity on the rows and even parity on the columns, i.e., adjoining to the 8 x 4 matrix, the matrix, which is zero except for the fourth column (of all ones). Furthermore, any seven rows and three columns will form the BCH (21,15;3) code. This box code has the same weight structure as the quadratic residue and BCH codes of the same dimensions. Whether there exists an algebraic isomorphism to either code is as yet unknown.

  18. ACYSYS in a box

    SciTech Connect

    Briegel, C.; Finstrom, D.; Hendricks, B.; King, C.; Lackey, S.; Neswold, R.; Nicklaus, D.; Patrick, J.; Petrov, A.; Rechenmacher, R.; Schumann, C.; /Fermilab

    2011-11-01

    The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a 'box' such as a laptop. The goal was to provide a platform isolated from the 'online' control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a standalone environment for research and development including a turnkey control system for collaborators. Over time, the code base running on Scientific Linux has enabled all the salient features of the Fermilab's control system to be captured in an off-the-shelf laptop. The anticipated additional benefits of packaging the system include improved maintenance, reliability, documentation, and future enhancements.

  19. Impedance Measurement Box

    ScienceCinema

    Christophersen, Jon

    2016-07-12

    Energy storage devices, primarily batteries, are now more important to consumers, industries and the military. With increasing technical complexity and higher user expectations, there is also a demand for highly accurate state-of-health battery assessment techniques. IMB incorporates patented, proprietary, and tested capabilities using control software and hardware that can be part of an embedded monitoring system. IMB directly measures the wideband impedance spectrum in seconds during battery operation with no significant impact on service life. It also can be applied to batteries prior to installation, confirming health before entering active service, as well as during regular maintenance. For more information about this project, visit http://www.inl.gov/rd100/2011/impedance-measurement-box/

  20. Impedance Measurement Box

    SciTech Connect

    Christophersen, Jon

    2011-01-01

    Energy storage devices, primarily batteries, are now more important to consumers, industries and the military. With increasing technical complexity and higher user expectations, there is also a demand for highly accurate state-of-health battery assessment techniques. IMB incorporates patented, proprietary, and tested capabilities using control software and hardware that can be part of an embedded monitoring system. IMB directly measures the wideband impedance spectrum in seconds during battery operation with no significant impact on service life. It also can be applied to batteries prior to installation, confirming health before entering active service, as well as during regular maintenance. For more information about this project, visit http://www.inl.gov/rd100/2011/impedance-measurement-box/

  1. Being Creative "Inside the Box"

    ERIC Educational Resources Information Center

    Tomascoff, Rocky

    2011-01-01

    Artist Joseph Cornell (1903-1972) created wonderful environments inside boxes using mostly found objects. They were often Surrealistic in nature. Some boxes were designed with glass fronts, and others were meant to be interactive with the viewer, wherein the objects could be handled. With Joseph Cornell in mind, the author introduces an art…

  2. Cardboard Boxes: Learning Concepts Galore!

    ERIC Educational Resources Information Center

    Warner, Laverne; Wilmoth, Linda

    2007-01-01

    Mrs. Keenan, a preschool teacher, observed her 3-year-old granddaughter Riley pull, tug, and stack piles of holiday boxes on the floor. She remembered that her child care director had suggested using boxes as a curriculum theme, but she hadn't given much thought about the idea until now. She said to herself, "I wonder if my children would be as…

  3. What Makes a Better Box?

    ERIC Educational Resources Information Center

    Moyer, Richard; Everett, Susan

    2010-01-01

    Every morning, many Americans start their day with a bowl of cereal. Some spend time while they eat breakfast reading the back of the cereal box, but few consider its size, shape, and construction, or realize that it was designed by an engineer. This article describes a lesson in which students design, build, and critique cereal boxes. The lesson…

  4. Spirit Boxes: Expressions of Culture.

    ERIC Educational Resources Information Center

    DeMuro, Ted

    1984-01-01

    After studying the culture and art of the ancient civilizations of South America, Mesopotamia, Greece, and Egypt, secondary level art students made spirit boxes as expressions of the various cultures. How to make the boxes and how to prepare the face molds are described. (RM)

  5. Being Creative "Inside the Box"

    ERIC Educational Resources Information Center

    Tomascoff, Rocky

    2011-01-01

    Artist Joseph Cornell (1903-1972) created wonderful environments inside boxes using mostly found objects. They were often Surrealistic in nature. Some boxes were designed with glass fronts, and others were meant to be interactive with the viewer, wherein the objects could be handled. With Joseph Cornell in mind, the author introduces an art…

  6. Spirit Boxes: Expressions of Culture.

    ERIC Educational Resources Information Center

    DeMuro, Ted

    1984-01-01

    After studying the culture and art of the ancient civilizations of South America, Mesopotamia, Greece, and Egypt, secondary level art students made spirit boxes as expressions of the various cultures. How to make the boxes and how to prepare the face molds are described. (RM)

  7. What Makes a Better Box?

    ERIC Educational Resources Information Center

    Moyer, Richard; Everett, Susan

    2010-01-01

    Every morning, many Americans start their day with a bowl of cereal. Some spend time while they eat breakfast reading the back of the cereal box, but few consider its size, shape, and construction, or realize that it was designed by an engineer. This article describes a lesson in which students design, build, and critique cereal boxes. The lesson…

  8. Cardboard Boxes: Learning Concepts Galore!

    ERIC Educational Resources Information Center

    Warner, Laverne; Wilmoth, Linda

    2007-01-01

    Mrs. Keenan, a preschool teacher, observed her 3-year-old granddaughter Riley pull, tug, and stack piles of holiday boxes on the floor. She remembered that her child care director had suggested using boxes as a curriculum theme, but she hadn't given much thought about the idea until now. She said to herself, "I wonder if my children would be as…

  9. Potentials of Optical Damage Assessment Techniques in Automotive Crash-Concepts composed of FRP-Steel Hybrid Material Systems

    NASA Astrophysics Data System (ADS)

    Dlugosch, M.; Spiegelhalter, B.; Soot, T.; Lukaszewicz, D.; Fritsch, J.; Hiermaier, S.

    2017-05-01

    With car manufacturers simultaneously facing increasing passive safety and efficiency requirements, FRP-metal hybrid material systems are one way to design lightweight and crashworthy vehicle structures. Generic automotive hybrid structural concepts have been tested under crash loading conditions. In order to assess the state of overall damage and structural integrity, and primarily to validate simulation data, several NDT techniques have been assessed regarding their potential to detect common damage mechanisms in such hybrid systems. Significant potentials were found particularly in combining 3D-topography laser scanning and X-Ray imaging results. Ultrasonic testing proved to be limited by the signal coupling quality on damaged or curved surfaces.

  10. Thinking Inside the Box

    SciTech Connect

    Boeheim, Charles T.; /SLAC

    2007-11-16

    In early 2007, SLAC was faced with a shortage of both electrical power and cooling in the main computer building, at the same time that the BaBar collaboration needed a new cluster of 250 batch machines installed. A number of different options were explored for the expansion. Provision of additional electrical power to the building was estimated to take one to two years, and cost several million dollars; additional cooling was even worse. Space in a Silicon Valley co-location facilities was reasonable on a one-year timescale, but broke even in costs by the end of three years, and were more expensive after that. There were also unresolved questions about the affects of additional latency from an offsite compute cluster to the onsite disk servers. The option of converting existing experimental hall space into computer space was estimated at one year, with uncertain availability. An option to aggressively replace several existing clusters with more power-efficient equipment was studied closely, but was disruptive to continued operations, expensive, and didn't provide any additional headroom. Finally, the installation of a Sun Project Blackbox (PBB) unit was selected as providing the capacity on a timescale of six months for a reasonable cost with minimal disruption to service. SLAC obtained and installed a beta unit and have been running it in production since September 2007. The experiences described are with the Early Access version of the PBB. The production version of the box has engineering changes based in part on our experiences.

  11. Antioxidant therapeutics: Pandora's box.

    PubMed

    Day, Brian J

    2014-01-01

    Evolution has favored the utilization of dioxygen (O2) in the development of complex multicellular organisms. O2 is actually a toxic mutagenic gas that is highly oxidizing and combustible. It is thought that plants are largely to blame for polluting the earth's atmosphere with O2 owing to the development of photosynthesis by blue-green algae over 2 billion years ago. The rise of the plants and atmospheric O2 levels placed evolutionary stress on organisms to adapt or become extinct. This implies that all the surviving creatures on our planet are mutants that have adapted to the "abnormal biology" of O2. Much of the adaptation to the presence of O2 in biological systems comes from well-coordinated antioxidant and repair systems that focus on converting O2 to its most reduced form, water (H2O), and the repair and replacement of damaged cellular macromolecules. Biological systems have also harnessed O2's reactive properties for energy production, xenobiotic metabolism, and host defense and as a signaling messenger and redox modulator of a number of cell signaling pathways. Many of these systems involve electron transport systems and offer many different mechanisms by which antioxidant therapeutics can alternatively produce an antioxidant effect without directly scavenging oxygen-derived reactive species. It is likely that each agent will have a different set of mechanisms that may change depending on the model of oxidative stress, organ system, or disease state. An important point is that all biological processes of aerobes have coevolved with O2 and this creates a Pandora's box for trying to understand the mechanism(s) of action of antioxidants being developed as therapeutic agents. Copyright © 2013 Elsevier Inc. All rights reserved.

  12. Breaking out of Our Boxes.

    ERIC Educational Resources Information Center

    Patterson, William

    2003-01-01

    Argues that educators must "think outside the box" to improve school performance. Suggests several areas for expanded thought, including school size, curriculum coverage, grading practices, use of time, organization of students, time management, and belief statement. (PKP)

  13. Breaking out of Our Boxes.

    ERIC Educational Resources Information Center

    Patterson, William

    2003-01-01

    Argues that educators must "think outside the box" to improve school performance. Suggests several areas for expanded thought, including school size, curriculum coverage, grading practices, use of time, organization of students, time management, and belief statement. (PKP)

  14. Center Spot: Shoe Box Science

    ERIC Educational Resources Information Center

    Hoffman, Jan

    1976-01-01

    This is the second "Center Spot" devoted to Jan Hoffman's "Shoe Box Science," a program that organizes manipulative materials so that children can identify, describe, order, construct, name and distinguish on their own.

  15. Monitoring Poisson’s Ratio Degradation of FRP Composites under Fatigue Loading Using Biaxially Embedded FBG Sensors

    PubMed Central

    Akay, Erdem; Yilmaz, Cagatay; Kocaman, Esat S.; Turkmen, Halit S.; Yildiz, Mehmet

    2016-01-01

    The significance of strain measurement is obvious for the analysis of Fiber-Reinforced Polymer (FRP) composites. Conventional strain measurement methods are sufficient for static testing in general. Nevertheless, if the requirements exceed the capabilities of these conventional methods, more sophisticated techniques are necessary to obtain strain data. Fiber Bragg Grating (FBG) sensors have many advantages for strain measurement over conventional ones. Thus, the present paper suggests a novel method for biaxial strain measurement using embedded FBG sensors during the fatigue testing of FRP composites. Poisson’s ratio and its reduction were monitored for each cyclic loading by using embedded FBG sensors for a given specimen and correlated with the fatigue stages determined based on the variations of the applied fatigue loading and temperature due to the autogenous heating to predict an oncoming failure of the continuous fiber-reinforced epoxy matrix composite specimens under fatigue loading. The results show that FBG sensor technology has a remarkable potential for monitoring the evolution of Poisson’s ratio on a cycle-by-cycle basis, which can reliably be used towards tracking the fatigue stages of composite for structural health monitoring purposes. PMID:28773901

  16. Experimental evaluation on the effectiveness of acoustic-laser technique towards the FRP-bonded concrete system

    NASA Astrophysics Data System (ADS)

    Qiu, Qiwen; Lau, Denvid

    2015-04-01

    Nondestructive evaluation (NDE) is essential for the detection of defects in the externally bonded fiber reinforced polymer (FRP) concrete, especially such bonded system can be readily found in strengthened and retrofitted structures nowadays. Among all the current NDE methods, acoustic-laser technique is a non-contact methodology with a high applicability to detect near-surface defect in composite structures, which is very suitable to be used for detecting defect in FRP retrofitted and strengthened concrete structures. The methodology is based on the acoustic excitation on the target surface and the measurement of its vibration using laser beam. To our best knowledge, no comprehensive study has been conducted to examine how the acoustic location and other related parameters affect the measurement sensitivity. In fact, several operational parameters affecting the performance of the test system are discussed here including (i) distance between the acoustic source and the object, (ii) sound pressure level (SPL), (iii) angle of the laser beam incidence and (iv) angle of the acoustic incidence. Here, we perform a series of parametric studies against these four operational parameters. Based on our experimental measurements, all parameters show significant effects on the measurement sensitivity of the acoustic-laser technique. Recommendations on an optimal range of each concerned parameter are provided.

  17. Comparison of lock-in and pulse-phase thermography for defect characterization in FRP composites applied to concrete

    NASA Astrophysics Data System (ADS)

    Brown, Jeff; Chittineni, Sai Harsha

    2015-05-01

    Thermal imaging is a well-established technique for the non-destructive evaluation of FRP composites applied to reinforced concrete. Defect characterization using IR thermography, however, remains a topic of on-going research, and there are currently no universally accepted standards for data collection or interpretation. This research involved large scale thermography inspection of two FRP strengthened bridge girders that were removed from service after approximately 10 years of service in a potentially corrosive marine environment. Trial inspections were performed on test areas where defects could be identified using sounding methods. Two procedures showed the most promise for identifying and characterizing defects: sinusoidal (lock-in style) heating with periods ranging from 5 s to 40 s and constant step heating for 30 s followed by 60 s of cooling. Both methods resulted in a series of phase images that provided insight into the depth and general nature of detected defects. This paper presents the findings of a comparison study between these two thermal imaging techniques.

  18. Structural performance of a hybrid FRP-aluminum modular triangular Truss system subjected to various loading conditions.

    PubMed

    Zhang, Dongdong; Huang, Yaxin; Zhao, Qilin; Li, Fei; Li, Feng; Gao, Yifeng

    2014-01-01

    A novel hybrid FRP-aluminum truss system has been employed in a two-rut modular bridge superstructure composed of twin inverted triangular trusses. The actual flexural behavior of a one-rut truss has been previously investigated under the on-axis loading test; however, the structural performance of the one-rut truss subjected to an off-axis load is still not fully understood. In this paper, a geometrical linear finite element model is introduced and validated by the on-axis loading test; the structural performance of the one-rut truss subjected to off-axis load was numerically obtained; the dissimilarities of the structural performance between the two different loading cases are investigated in detail. The results indicated that (1) the structural behavior of the off-axis load differs from that of the on-axis load, and the off-axis load is the critical loading condition controlling the structural performance of the triangular truss; (2) under the off-axis load, the FRP trussed members and connectors bear certain out-of-plane bending moments and are subjected to a complicated stress state; and (3) the stress state of these members does not match that of the initial design, and optimization for the redesign of these members is needed, especially for the pretightened teeth connectors.

  19. Discontinuous Brillouin strain monitoring of small concrete bridges: comparison between near-to-surface and smart FRP fiber installation techniques

    NASA Astrophysics Data System (ADS)

    Bastianini, Filippo; Rizzo, Andrea; Galati, Nestore; Deza, Ursula; Nanni, Antonio

    2005-05-01

    Brillouin fiber optic sensing is a promising technology for Structural Health Monitoring (SHM) whose diffusion is however at present reduced by the unavailability of proper sensor products and established installation techniques specifically aimed at the building industry. Due to its intrinsic distributed sensing capability, Brillouin systems can individually measure the deformation of any single segment of considerable lengths of single-mode fiber. In addition, Brillouin retains all the other typical advantages of Fiber Optic Sensors (FOS), such as harsh environment durability and electro-magnetic interference rejection. These advantages, especially considering that the required sensors are really low cost, make the system particularly attractive for periodical ("discontinuous") strain monitoring of unattended infrastructures that might be exposed to ageing and vandalism damages. Despite the high equipment cost, the technique can become economically convenient when the same initial investment can be amortized over a number of applications that can be monitored periodically using the same device. This work presents a comparison between two different Brillouin sensor installation techniques: Near-to-Surface Fiber (NSF) embedding and smart-FRP sensor bonding. Both systems have been experimented in the field on small Reinforced Concrete (RC) bridges subject to a diagnostic load test. The obtained results clearly highlight the advantages of the smart-FRP system, in terms of performance enhancements, installation cost, and time reduction.

  20. Structural Performance of a Hybrid FRP-Aluminum Modular Triangular Truss System Subjected to Various Loading Conditions

    PubMed Central

    Zhang, Dongdong; Huang, Yaxin; Zhao, Qilin; Li, Fei; Gao, Yifeng

    2014-01-01

    A novel hybrid FRP-aluminum truss system has been employed in a two-rut modular bridge superstructure composed of twin inverted triangular trusses. The actual flexural behavior of a one-rut truss has been previously investigated under the on-axis loading test; however, the structural performance of the one-rut truss subjected to an off-axis load is still not fully understood. In this paper, a geometrical linear finite element model is introduced and validated by the on-axis loading test; the structural performance of the one-rut truss subjected to off-axis load was numerically obtained; the dissimilarities of the structural performance between the two different loading cases are investigated in detail. The results indicated that (1) the structural behavior of the off-axis load differs from that of the on-axis load, and the off-axis load is the critical loading condition controlling the structural performance of the triangular truss; (2) under the off-axis load, the FRP trussed members and connectors bear certain out-of-plane bending moments and are subjected to a complicated stress state; and (3) the stress state of these members does not match that of the initial design, and optimization for the redesign of these members is needed, especially for the pretightened teeth connectors. PMID:25254254

  1. Effects of FRP application on the seismic response of a masonry church in Emilia-Romagna (Italy)

    NASA Astrophysics Data System (ADS)

    Milani, Gabriele; Shehu, Rafael; Valente, Marco

    2016-12-01

    The paper presents some preliminary results of advanced Finite Element (FE) analyses on the upgrading of old masonry constructions by means of Fiber Reinforced Polymers (FRPs). The case study is a masonry Romanesque church, located in Ferrara, Emilia Romagna (Italy). The church exhibits widespread damage caused by the recent earthquake sequence occurred in 2012 about 60 km far from Ferrara with two major seismic events of magnitude 5.8 and 5.9. The main damage involved mainly the columns of the central nave and the apse. A partial detachment of the façade was observed too. First, gravity load analyses and non-linear static and dynamic analyses are performed on the church in the unretrofitted configuration. Numerical results put in evidence the insufficient strength of the apse and the columns of the naves, and the detachment of the façade. A strengthening intervention conducted by means of FRP strips is numerically analysed, assuming the behavior of the strips, especially for what concerns delamination, in agreement with Italian Guidelines. Numerical results show a quite reasonable strength improvement of the weak structural elements due to FRP application, with levels of strength higher than the minimum ones required by Italian Code.

  2. The lithium vapor box divertor

    NASA Astrophysics Data System (ADS)

    Goldston, R. J.; Myers, R.; Schwartz, J.

    2016-02-01

    It has long been recognized that volumetric dissipation of the plasma heat flux from a fusion power system is preferable to its localized impingement on a material surface. Volumetric dissipation mitigates both the anticipated very high heat flux and intense particle-induced damage due to sputtering. Recent projections to a tokamak demonstration power plant suggest an immense upstream parallel heat flux, of order 20 GW m-2, implying that fully detached operation may be a requirement for the success of fusion power. Building on pioneering work on the use of lithium by Nagayama et al and by Ono et al as well as earlier work on the gas box divertor by Watkins and Rebut, we present here a concept for a lithium vapor box divertor, in which lithium vapor extracts momentum and energy from a fusion-power-plant divertor plasma, using fully volumetric processes. At the high powers and pressures that are projected this requires a high density of lithium vapor, which must be isolated from the main plasma in order to avoid lithium build-up on the chamber walls or in the plasma. Isolation is achieved through a powerful multi-box differential pumping scheme available only for condensable vapors. The preliminary box-wise calculations are encouraging, but much more work is required to demonstrate the practical viability of this scheme, taking into account at least 2D plasma and vapor flows within and between the vapor boxes and out of the vapor boxes to the main plasma.

  3. 30 CFR 57.12006 - Distribution boxes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distribution boxes. 57.12006 Section 57.12006... and Underground § 57.12006 Distribution boxes. Distribution boxes shall be provided with a... deenergized, and the distribution box shall be labeled to show which circuit each device controls....

  4. Plate forming and break down pizza box

    DOEpatents

    Pantisano, Frank; Devine, Scott M.

    1992-01-01

    A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

  5. Fire Radiative Power (FRP)-based Emission Factors of PM2.5, CO and NOX for Remote Sensing of Biomass Burning Emissions

    NASA Astrophysics Data System (ADS)

    Karandana Gamalathge, T. D.; Chen, L. W. A.

    2015-12-01

    Large-scale biomass burning such as forest fires represents an important and yet uncertain source of air pollutants and greenhouse gases on a global scale. Due to the highly accidental nature of forest fires, satellite remote sensing could be a promising method to develop regional and global fire emission inventories on a real-time basis. Reliable fire radiative power (FRP)-based fuel consumption and emission factors are critical in this approach. In an attempt to obtain the information, laboratory combustion experiments were conducted to simultaneously monitor FRP, fuel consumption, and emissions of fine particulate matter (PM2.5), carbon monoxide (CO), and reactive nitrogen oxides (NO and NO2). FRP were quantified using temperature-resolved values from a thermal imager instead of conventionally used average temperature, as the former provides more realistic estimates. For dry Ponderosa pine branches, a common fuel in the Sierra Nevada, a strong correlation (r2 ~ 0.8) between FRP and the mass reduction rate (MRR) was found. This led to a radiative energy yield (REY) of 8.5 ± 1.2 MJ/kg, assuming blackbody radiation and a flame emissivity of 0.5. Mass-based emission factors were determined with the carbon balance approach. Considering the ratio of mass-based emission factors and the REY, FRP-based emission factors: PM2.5: 11 g/MJ, CO: 8.0 g/MJ, NO: 0.33 g/MJ, and NO2: 0.07 g/MJ were quantified. The application of this approach to other fuel types and uncertainties in the measurements will be discussed.

  6. The lithium vapor box divertor

    SciTech Connect

    Goldston, R. J.; Myers, R.; Schwartz, J.

    2016-01-13

    It has long been recognized that volumetric dissipation of the plasma heat flux from a fusion power system is preferable to its localized impingement on a material surface. Volumetric dissipation mitigates both the anticipated very high heat flux and intense particle-induced damage due to sputtering. Our recent projections to a tokamak demonstration power plant suggest an immense upstream parallel heat flux, of order 20 GW m-2, implying that fully detached operation may be a requirement for the success of fusion power. Building on pioneering work on the use of lithium by Nagayama et al and by Ono et al as well as earlier work on the gas box divertor by Watkins and Rebut, we present here a concept for a lithium vapor box divertor, in which lithium vapor extracts momentum and energy from a fusion-power-plant divertor plasma, using fully volumetric processes. Furthermore, at the high powers and pressures that are projected this requires a high density of lithium vapor, which must be isolated from the main plasma in order to avoid lithium build-up on the chamber walls or in the plasma. Isolation is achieved through a powerful multi-box differential pumping scheme available only for condensable vapors. The preliminary box-wise calculations are encouraging, but much more work is required in order to demonstrate the practical viability of this scheme, taking into account at least 2D plasma and vapor flows within and between the vapor boxes and out of the vapor boxes to the main plasma.

  7. The lithium vapor box divertor

    DOE PAGES

    Goldston, R. J.; Myers, R.; Schwartz, J.

    2016-01-13

    It has long been recognized that volumetric dissipation of the plasma heat flux from a fusion power system is preferable to its localized impingement on a material surface. Volumetric dissipation mitigates both the anticipated very high heat flux and intense particle-induced damage due to sputtering. Our recent projections to a tokamak demonstration power plant suggest an immense upstream parallel heat flux, of order 20 GW m-2, implying that fully detached operation may be a requirement for the success of fusion power. Building on pioneering work on the use of lithium by Nagayama et al and by Ono et al asmore » well as earlier work on the gas box divertor by Watkins and Rebut, we present here a concept for a lithium vapor box divertor, in which lithium vapor extracts momentum and energy from a fusion-power-plant divertor plasma, using fully volumetric processes. Furthermore, at the high powers and pressures that are projected this requires a high density of lithium vapor, which must be isolated from the main plasma in order to avoid lithium build-up on the chamber walls or in the plasma. Isolation is achieved through a powerful multi-box differential pumping scheme available only for condensable vapors. The preliminary box-wise calculations are encouraging, but much more work is required in order to demonstrate the practical viability of this scheme, taking into account at least 2D plasma and vapor flows within and between the vapor boxes and out of the vapor boxes to the main plasma.« less

  8. Classical three-box 'paradox'

    NASA Astrophysics Data System (ADS)

    Kirkpatrick, K. A.

    2003-05-01

    A simple classical probabilistic system (a simple card game) classically exemplifies Aharonov and Vaidman's 'three-box 'paradox'' (1991 J. Phys. A: Math. Gen. 24 2315), implying that the three-box example is neither quantal nor a paradox and leaving one with less difficulty to busy the interpreters of quantum mechanics. An ambiguity in the usual expression of the retrodiction formula is shown to have misled Albert et al (1985 Phys. Rev. Lett. 54 5) to a result not, in fact, 'curious'; the discussion illustrates how to avoid this ambiguity.

  9. Cortical-Bone Fragility — Insights from sFRP4 Deficiency in Pyle’s Disease

    PubMed Central

    Unger, Sheila; Hesse, Eric; Yamana, Kei; Kiviranta, Riku; Solban, Nicolas; Liu, Jeff; Brommage, Robert; Boduroglu, Koray; Bonafé, Luisa; Campos-Xavier, Belinda; Dikoglu, Esra; Eastell, Richard; Gossiel, Fatma; Harshman, Keith; Nishimura, Gen; Girisha, Katta M.; Stevenson, Brian J.; Takita, Hiroyuki; Rivolta, Carlo

    2016-01-01

    BACKGROUND Cortical-bone fragility is a common feature in osteoporosis that is linked to nonvertebral fractures. Regulation of cortical-bone homeostasis has proved elusive. The study of genetic disorders of the skeleton can yield insights that fuel experimental therapeutic approaches to the treatment of rare disorders and common skeletal ailments. METHODS We evaluated four patients with Pyle’s disease, a genetic disorder that is characterized by cortical-bone thinning, limb deformity, and fractures; two patients were examined by means of exome sequencing, and two were examined by means of Sanger sequencing. After a candidate gene was identified, we generated a knockout mouse model that manifested the phenotype and studied the mechanisms responsible for altered bone architecture. RESULTS In all affected patients, we found biallelic truncating mutations in SFRP4, the gene encoding secreted frizzled-related protein 4, a soluble Wnt inhibitor. Mice deficient in Sfrp4, like persons with Pyle’s disease, have increased amounts of trabecular bone and unusually thin cortical bone, as a result of differential regulation of Wnt and bone morphogenetic protein (BMP) signaling in these two bone compartments. Treatment of Sfrp4-deficient mice with a soluble Bmp2 receptor (RAP-661) or with antibodies to sclerostin corrected the cortical-bone defect. CONCLUSIONS Our study showed that Pyle’s disease was caused by a deficiency of sFRP4, that cortical-bone and trabecular-bone homeostasis were governed by different mechanisms, and that sFRP4-mediated cross-regulation between Wnt and BMP signaling was critical for achieving proper cortical-bone thickness and stability. (Funded by the Swiss National Foundation and the National Institutes of Health.) PMID:27355534

  10. NETL's JIC in a box

    ScienceCinema

    David Anna

    2016-07-12

    The National Energy Technology Laboratory developed the idea of a portable joint information center AKA JIC in-a-box. This video discribes some of the equipment in the portable JIC as well as some of the methodology that NETL developed as a result of this portable JIC concept.

  11. The Bird Box Survey Project

    ERIC Educational Resources Information Center

    Willis, Patrick

    2014-01-01

    When high school students are asked what's the best part of science class, many will say it's the field trips. Students enjoy engaging in authentic, community-based science outside the classroom. To capitalize on this, Patrick Willis created the Bird Box Survey Project for his introductory field biology class. The project takes students…

  12. On the Dirichlet's Box Principle

    ERIC Educational Resources Information Center

    Poon, Kin-Keung; Shiu, Wai-Chee

    2008-01-01

    In this note, we will focus on several applications on the Dirichlet's box principle in Discrete Mathematics lesson and number theory lesson. In addition, the main result is an innovative game on a triangular board developed by the authors. The game has been used in teaching and learning mathematics in Discrete Mathematics and some high schools in…

  13. Expo-Box Contact Us

    EPA Pesticide Factsheets

    EPA-Expo-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases, mode

  14. Black Boxes in Workplace Mathematics

    ERIC Educational Resources Information Center

    Williams, Julian; Wake, Geoff

    2007-01-01

    We ground Cultural-Historical Activity Theory (CHAT) in studies of workplace practices from a mathematical point of view. We draw on multiple case study visits by college students and teacher-researchers to workplaces. By asking questions that "open boxes", we "outsiders and boundary-crossers" sought to expose contradictions between College and…

  15. NETL's JIC in a box

    SciTech Connect

    David Anna

    2009-06-03

    The National Energy Technology Laboratory developed the idea of a portable joint information center AKA JIC in-a-box. This video discribes some of the equipment in the portable JIC as well as some of the methodology that NETL developed as a result of this portable JIC concept.

  16. Breaking Out of the Box.

    ERIC Educational Resources Information Center

    Spady, William G.

    2000-01-01

    Deplores inconsistencies between the realities of today's technologically driven, information-age world and the static, constraining boxes in which state-initiated, accountability- focused reforms hold American education. We must reconceptualize schooling, curriculum content, time, grade levels, and achievement to allow more informal,…

  17. The Bird Box Survey Project

    ERIC Educational Resources Information Center

    Willis, Patrick

    2014-01-01

    When high school students are asked what's the best part of science class, many will say it's the field trips. Students enjoy engaging in authentic, community-based science outside the classroom. To capitalize on this, Patrick Willis created the Bird Box Survey Project for his introductory field biology class. The project takes students…

  18. Black Boxes in Workplace Mathematics

    ERIC Educational Resources Information Center

    Williams, Julian; Wake, Geoff

    2007-01-01

    We ground Cultural-Historical Activity Theory (CHAT) in studies of workplace practices from a mathematical point of view. We draw on multiple case study visits by college students and teacher-researchers to workplaces. By asking questions that "open boxes", we "outsiders and boundary-crossers" sought to expose contradictions between College and…

  19. Looking into the Black Box

    ERIC Educational Resources Information Center

    Shellman, Amy

    2011-01-01

    In these remarks, the author shares some comments that not only encapsulate the individual research presentations but also help provide some context with regard to the theme for the session titled "Into the Black Box: Linking Process and Outcomes in Experiential Education," and what these papers collectively contribute to experiential education…

  20. On the Dirichlet's Box Principle

    ERIC Educational Resources Information Center

    Poon, Kin-Keung; Shiu, Wai-Chee

    2008-01-01

    In this note, we will focus on several applications on the Dirichlet's box principle in Discrete Mathematics lesson and number theory lesson. In addition, the main result is an innovative game on a triangular board developed by the authors. The game has been used in teaching and learning mathematics in Discrete Mathematics and some high schools in…

  1. EPA-Expo-Box Terminology

    EPA Pesticide Factsheets

    EPA-Expo-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases,

  2. The Cereal Box Problem Revisited.

    ERIC Educational Resources Information Center

    Wilkins, Jesse L. M.

    1999-01-01

    Investigates the cereal box problem using both an experimental and theoretical framework, and Monte Carlo methods. Using empirical data, students can discover patterns and relationships that help them understand the origin of the theoretical solution to the problem. Contains 17 references. (Author/ASK)

  3. Pro-Inflammatory wnt5a and Anti-Inflammatory sFRP5 Are Differentially Regulated by Nutritional Factors in Obese Human Subjects

    PubMed Central

    Schulte, Dominik M.; Müller, Nike; Neumann, Katrin; Oberhäuser, Frank; Faust, Michael; Güdelhöfer, Heike; Brandt, Burkhard; Krone, Wilhelm; Laudes, Matthias

    2012-01-01

    Background Obesity is associated with macrophage infiltration of adipose tissue. These inflammatory cells affect adipocytes not only by classical cytokines but also by the secreted glycopeptide wnt5a. Healthy adipocytes are able to release the wnt5a inhibitor sFRP5. This protective effect, however, was found to be diminished in obesity. The aim of the present study was to examine (1) whether obese human subjects exhibit increased serum concentrations of wnt5a and (2) whether wnt5a and/or sFRP5 serum concentrations in obese subjects can be influenced by caloric restriction. Methodology 23 obese human subjects (BMI 44.1±1.1 kg/m2) and 12 age- and sex-matched lean controls (BMI 22.3±0.4 kg/m2) were included in the study. Obese subjects were treated with a very low-calorie diet (approximately 800 kcal/d) for 12 weeks. Body composition was assessed by impedance analysis, insulin sensitivity was estimated by HOMA-IR and the leptin-to-adiponectin ratio and wnt5a and sFRP5 serum concentrations were measured by ELISA. sFRP5 expression in human adipose tissue biopsies was further determined on protein level by immunohistology. Principal Findings Pro-inflammatory wnt5a was not measurable in any serum sample of lean control subjects. In patients with obesity, however, wnt5a became significantly detectable consistent with low grade inflammation in such subjects. Caloric restriction resulted in a weight loss from 131.9±4.0 to 112.3±3.2 kg in the obese patients group. This was accompanied by a significant decrease of HOMA-IR and leptin-to-adiponectin ratio, indicating improved insulin sensitivity. Interestingly, these metabolic improvements were associated with a significant increase in serum concentrations of the anti-inflammatory factor and wnt5a-inhibitor sFRP5. Conclusions/Significance Obesity is associated with elevated serum levels of pro-inflammatory wnt5a in humans. Furthermore, caloric restriction beneficially affects serum concentrations of anti-inflammatory sFRP5

  4. Evaluation of bike boxes at signalized intersections.

    PubMed

    Dill, Jennifer; Monsere, Christopher M; McNeil, Nathan

    2012-01-01

    This paper presents a before-after study of bike boxes at 10 signalized intersections in Portland, Oregon. The bike boxes, also known as advanced stop lines or advanced stop boxes, were installed to increase visibility of cyclists and reduce conflicts between motor vehicles and cyclists, particularly in potential "right-hook" situations. Before and after video were analyzed for seven intersections with green bike boxes, three intersections with uncolored bike boxes, and two control intersections. User perceptions were measured through surveys of cyclists passing through five of the bike box intersections and of motorists working downtown, where the boxes were concentrated. Both the observations and survey of motorists found a high rate of compliance and understanding of the markings. Overall, 73% of the stopping motor vehicles did not encroach at all into the bike box. Both motor vehicle and bicycle encroachment in the pedestrian crosswalk fell significantly at the bike box locations compared to the control intersections. The bike boxes had mixed effects on the motorists' encroachment in the bicycle lane. The number of observed conflicts at the bike box locations decreased, while the total number of cyclists and motor vehicles turning right increased. Negative-binomial models based upon the data predict fewer conflicts with the boxes, particularly as right-turning motor vehicle volumes increase. Observations of yielding behavior at two bike box and one control intersection found an improvement in motorists yielding to cyclists at the bike box locations. Differences in the traffic volumes and location contexts make firm conclusions about the effects of green coloring of the boxes difficult. Higher shares of surveyed motorists felt that the bike boxes made driving safer rather than more dangerous, even when the sample was narrowed to respondents who were not also cyclists. Over three-quarters of the surveyed cyclists thought that the boxes made the intersection safer

  5. Glove box for water pit applications

    DOEpatents

    Mills, William C.; Rabe, Richard A.

    2005-01-18

    A glove box assembly that includes a glove box enclosure attached to a longitudinally extending hollow tube having an entranceway, wherein the portion of the tube is in a liquid environment. An elevator member is provided for raising an object that is introduced into the hollow tube from the liquid environment to a gas environment inside the glove box enclosure while maintaining total containment.

  6. The Guide to the Ecology Box.

    ERIC Educational Resources Information Center

    Ontario Inst. for Studies in Education, Toronto.

    Cooperating with the Canadian Commission for UNESCO, the Ontario Institute for Studies in Education has prepared boxes of experimental curriculum materials on the subject of ecology. This guide summarizes the design and contents of the boxes and provides instructions for those using the boxes--principals, teachers, parents, librarians, and…

  7. The Heuristic Interpretation of Box Plots

    ERIC Educational Resources Information Center

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  8. The Guide to the Ecology Box.

    ERIC Educational Resources Information Center

    Ontario Inst. for Studies in Education, Toronto.

    Cooperating with the Canadian Commission for UNESCO, the Ontario Institute for Studies in Education has prepared boxes of experimental curriculum materials on the subject of ecology. This guide summarizes the design and contents of the boxes and provides instructions for those using the boxes--principals, teachers, parents, librarians, and…

  9. The Heuristic Interpretation of Box Plots

    ERIC Educational Resources Information Center

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  10. Illumination box and camera system

    DOEpatents

    Haas, Jeffrey S.; Kelly, Fredrick R.; Bushman, John F.; Wiefel, Michael H.; Jensen, Wayne A.; Klunder, Gregory L.

    2002-01-01

    A hand portable, field-deployable thin-layer chromatography (TLC) unit and a hand portable, battery-operated unit for development, illumination, and data acquisition of the TLC plates contain many miniaturized features that permit a large number of samples to be processed efficiently. The TLC unit includes a solvent tank, a holder for TLC plates, and a variety of tool chambers for storing TLC plates, solvent, and pipettes. After processing in the TLC unit, a TLC plate is positioned in a collapsible illumination box, where the box and a CCD camera are optically aligned for optimal pixel resolution of the CCD images of the TLC plate. The TLC system includes an improved development chamber for chemical development of TLC plates that prevents solvent overflow.

  11. Genistein downregulates onco-miR-1260b and upregulates sFRP1 and Smad4 via demethylation and histone modification in prostate cancer cells

    PubMed Central

    Hirata, H; Hinoda, Y; Shahryari, V; Deng, G; Tanaka, Y; Tabatabai, Z L; Dahiya, R

    2014-01-01

    Background: Recently several microRNAs (miRNAs) have been found to be regulated by genistein in cancer cells. In this study, we focused on the gene regulatory effect of genistein on microRNA and its target genes in prostate cancer (PC). Methods: Initially, we investigated the effect of genistein on prostate cancer cells and identified that the expression of miRNA-1260b was decreased by genistein. We performed functional analyses and investigated the relationship between miRNA-1260b expression and prostate cancer patient outcomes. Two target genes (sFRP1 and Smad4) of miR-1260b were identified based on computer algorithm and 3′UTR luciferase assay was carried out to determine direct miRNA regulation of the genes. Results: Genistein promoted apoptosis while inhibiting prostate cancer cell proliferation, invasion and TCF reporter activity in PC cells. MiR-1260b was highly expressed in prostate cancer tissues and significantly downregulated by genistein in PC cells. After knocking down miR-1260b, cell proliferation, invasion, migration and TCF reporter activity were decreased in PC cells. Western analysis and 3′UTR luciferase assay showed that the two target genes (sFRP1 and Smad4) were directly regulated by miR-1260b. The expression of sFRP1 and Smad4 was significantly decreased in prostate cancer tissues. Genistein also increased expression of these two genes via DNA demethylation and histone modifications. Conclusions: Our data suggest that genistein exerts its anti-tumour effect via downregulation of miR-1260b that targeted sRRP1 and Smad4 genes in prostate cancer cells. The expression of sFRP1 and Smad4 was also modulated by genistein via DNA methylation or histone modifications in PC cell lines. PMID:24504368

  12. MELFI-3 Cold Box inspection

    NASA Image and Video Library

    2015-03-13

    ISS043e000724 (03/13/2015) --- ESA (European Space Agency) astronaut Samantha Cristoforetti, Expedition 43 flight engineer works daily on science and maintenance duties on board the International Space Station. She is inspecting the Minus Eighty-degree Laboratory Freezer called by the shorter title "MELFI-3 Cold Box inspection". Astronauts are trained for long periods at the Johnson Space Center and in Russia before their missions in space begin so that they are fully trained for these complex duties.

  13. Invariant box-parameterization of neutrino oscillations

    SciTech Connect

    Weiler, Thomas J.; Wagner, DJ

    1998-10-19

    The model-independent 'box' parameterization of neutrino oscillations is examined. The invariant boxes are the classical amplitudes of the individual oscillating terms. Being observables, the boxes are independent of the choice of parameterization of the mixing matrix. Emphasis is placed on the relations among the box parameters due to mixing-matrix unitarity, and on the reduction of the number of boxes to the minimum basis set. Using the box algebra, we show that CP-violation may be inferred from measurements of neutrino flavor mixing even when the oscillatory factors have averaged. General analyses of neutrino oscillations among n{>=}3 flavors can readily determine the boxes, which can then be manipulated to yield magnitudes of mixing matrix elements.

  14. Number and brightness analysis of sFRP4 domains in live cells demonstrates vesicle association signal of the NLD domain and dynamic intracellular responses to Wnt3a

    PubMed Central

    Perumal, Vanathi; Krishnan, Kannan; Gratton, Enrico; Dharmarajan, Arun M; Fox, Simon A

    2015-01-01

    The Wnts are secreted, lipidated glycoproteins that play a role in cellular processes of differentiation, proliferation, migration, survival, polarity and stem cell self-renewal. The majority of Wnts biological effects are through binding to specific frizzled (Fzd) receptor complexes leading to activation of downstream pathways. Secreted Frizzled-related proteins (sFRPs) were first identified as antagonists of Wnt signalling by binding directly to Wnts. They comprise two domains, a Fzd-like cysteine rich domain (CRD) and a netrin-like domain (NLD). Subsequently sFRPs have been shown to also interact with Fzd receptors and more diverse functions have been identified, including potentiation of Wnt signalling. Many aspects of the biology of this family remain to be elucidated. We used the number and brightness (N&B) method, a technique based on fluorescence fluctuation analysis, to characterise the intracellular aggregation and trafficking of sFRP4 domains. We expressed sFRP4 and its’ domains as EGFP fusions and then characterised the effect of endogenous Wnt3a by fluorescence confocal imaging. We observed vesicular trafficking of sFRP4 and that the NLD domain has a vesicular association signal. We found that sFRP4 and the CRD formed oligomeric aggregates in the perinuclear region while the NLD was distributed evenly throughout the cell with a larger proportion of aggregates. Most significantly we observed intracellular redistribution of sFRP4 in response to Wnt3a suggesting that Wnt3a can modulate intracellular localisation and secretion of sFRP4. Our results reveal a number of novel findings regarding sFRP4 which are likely to have relevance to this wider family. PMID:25805505

  15. Cancer stem-like cells from head and neck cancers are chemosensitized by the Wnt antagonist, sFRP4, by inducing apoptosis, decreasing stemness, drug resistance and epithelial to mesenchymal transition.

    PubMed

    Warrier, S; Bhuvanalakshmi, G; Arfuso, F; Rajan, G; Millward, M; Dharmarajan, A

    2014-09-01

    Cancer stem cells (CSCs) of head and neck squamous cell carcinoma (HNSCC) are defined by high self-renewal and drug refractory potential. Involvement of Wnt/β-catenin signaling has been implicated in rapidly cycling cells such as CSCs, and inhibition of the Wnt/β-catenin pathway is a novel approach to target CSCs from HNSCC. In this study, we found that an antagonist of FrzB/Wnt, the secreted frizzled-related protein 4 (sFRP4), inhibited the growth of CSCs from two HNSCC cell lines, Hep2 and KB. We enriched the CD44(+) CSC population, and grew them in spheroid cultures. sFRP4 decreased the proliferation and increased the sensitivity of spheroids to a commonly used drug in HNSCC, namely cisplatin. Self-renewal in sphere formation assays decreased upon sFRP4 treatment, and the effect was reverted by the addition of Wnt3a. sFRP4 treatment of spheroids also decreased β-catenin, confirming its action through the Wnt/β-catenin signaling pathway. Quantitative PCR demonstrated a clear decrease of the stemness markers CD44 and ALDH, and an increase in CD24 and drug-resistance markers ABCG2 and ABCC4. Furthermore, we found that after sFRP4 treatment, there was a reversal in the expression of epithelial to mesenchymal (EMT) markers with the restoration of the epithelial marker E-cadherin, and depletion of EMT-specific markers twist, snail and N-cadherin. This is the first report demonstrating that the naturally occurring Wnt inhibitor, sFRP4, can be a potential drug to destroy CSC-enriched spheroids from HNSCCs. The repression of EMT and the decrease in stemness profile further strengthen the use of sFRP4 as a potent therapeutic against CSCs.

  16. New hot box solar cooker

    SciTech Connect

    Wang Xiping; Hou Shuqin; Sha Yongling; Liu Zude

    1992-12-31

    At present, over 100,000 solar cookers are in service in China. Most of these are concentrating cookers, making use of reflectors to concentrate sunlight at the cooking area. These cookers offer higher efficiency, more power and shorter cooking times. Since 1975 the authors have researched solar energy applications and, specifically, solar cookers. The major work has been the development of design calculations, selection of structure and materials, and performance testing. This paper describes the testing of several collection surface structures and box structures.

  17. Voronoi Diagrams Without Bounding Boxes

    NASA Astrophysics Data System (ADS)

    Sang, E. T. K.

    2015-10-01

    We present a technique for presenting geographic data in Voronoi diagrams without having to specify a bounding box. The method restricts Voronoi cells to points within a user-defined distance of the data points. The mathematical foundation of the approach is presented as well. The cell clipping method is particularly useful for presenting geographic data that is spread in an irregular way over a map, as for example the Dutch dialect data displayed in Figure 2. The automatic generation of reasonable cell boundaries also makes redundant a frequently used solution to this problem that requires data owners to specify region boundaries, as in Goebl (2010) and Nerbonne et al (2011).

  18. R & D of smart FRP-OFBG-based steel strand and its application in monitoring of prestressing loss for RC

    NASA Astrophysics Data System (ADS)

    Zhou, Zhi; Zhou, Hui; Huang, Ying; Ou, Jinping

    2008-03-01

    The long-term monitoring and performance evaluation techniques for the steel strand based pre-stressed structures are still not mature yet, especially for the prestressing loss monitoring and prediction. The main problem of this issue is lack of reliable monitoring techniques. To resolve this problem, in this paper, a new kind of quasi-distributed smart steel strand based on FRP-OFBG(Fiber Reinforced Polymer-Optical Fiber Bragg Grating) has been developed and its pre-stress monitoring principle has been also given. The test of the post-tension pre-stressed concrete beam with bonded tendons and its tensioning experiments have been conducted. And the prestressing loss of the steel strands has been monitored using the FBG in it. Researches results indicate that this kind of smart steel strand can monitor both instant loss and permanent loss of the prestressing successfully, and it can preferably describe the pre-stress loss state of the pre-stressed structure. Compared with the traditional monitoring instrument, this kind of smart steel strand owns distinct advantages and broad application foregrounds.

  19. Automatically produced FRP beams with embedded FOS in complex geometry: process, material compatibility, micromechanical analysis, and performance tests

    NASA Astrophysics Data System (ADS)

    Gabler, Markus; Tkachenko, Viktoriya; Küppers, Simon; Kuka, Georg G.; Habel, Wolfgang R.; Milwich, Markus; Knippers, Jan

    2012-04-01

    The main goal of the presented work was to evolve a multifunctional beam composed out of fiber reinforced plastics (FRP) and an embedded optical fiber with various fiber Bragg grating sensors (FBG). These beams are developed for the use as structural member for bridges or industrial applications. It is now possible to realize large scale cross sections, the embedding is part of a fully automated process and jumpers can be omitted in order to not negatively influence the laminate. The development includes the smart placement and layout of the optical fibers in the cross section, reliable strain transfer, and finally the coupling of the embedded fibers after production. Micromechanical tests and analysis were carried out to evaluate the performance of the sensor. The work was funded by the German ministry of economics and technology (funding scheme ZIM). Next to the authors of this contribution, Melanie Book with Röchling Engineering Plastics KG (Haren/Germany; Katharina Frey with SAERTEX GmbH & Co. KG (Saerbeck/Germany) were part of the research group.

  20. Single-step affinity purification of recombinant proteins using a self-excising module from Neisseria meningitidis FrpC

    PubMed Central

    Sadilkova, Lenka; Osicka, Radim; Sulc, Miroslav; Linhartova, Irena; Novak, Petr; Sebo, Peter

    2008-01-01

    Purification of recombinant proteins is often a challenging process involving several chromatographic steps that must be optimized for each target protein. Here, we developed a self-excising module allowing single-step affinity chromatography purification of untagged recombinant proteins. It consists of a 250-residue-long self-processing module of the Neisseria meningitidis FrpC protein with a C-terminal affinity tag. The N terminus of the module is fused to the C terminus of a target protein of interest. Upon binding of the fusion protein to an affinity matrix from cell lysate and washing out contaminating proteins, site-specific cleavage of the Asp–Pro bond linking the target protein to the self-excising module is induced by calcium ions. This results in the release of the target protein with only a single aspartic acid residue added at the C terminus, while the self-excising affinity module remains trapped on the affinity matrix. The system was successfully tested with several target proteins, including glutathione-S-transferase, maltose-binding protein, β-galactosidase, chloramphenicol acetyltransferase, and adenylate cyclase, and two different affinity tags, chitin-binding domain or poly-His. Moreover, it was demonstrated that it can be applied as an alternative to two currently existing systems, based on the self-splicing intein of Saccharomyces cerevisiae and sortase A of Staphylococcus aureus. PMID:18662906

  1. Secreted Frizzled-related protein 1 (sFRP1) regulates spermatid adhesion in the testis via dephosphorylation of focal adhesion kinase and the nectin-3 adhesion protein complex

    PubMed Central

    Wong, Elissa W. P.; Lee, Will M.; Cheng, C. Yan

    2013-01-01

    Development of spermatozoa in adult mammalian testis during spermatogenesis involves extensive cell migration and differentiation. Spermatogonia that reside at the basal compartment of the seminiferous epithelium differentiate into more advanced germ cell types that migrate toward the apical compartment until elongated spermatids are released into the tubule lumen during spermiation. Apical ectoplasmic specialization (ES; a testis-specific anchoring junction) is the only cell junction that anchors and maintains the polarity of elongating/elongated spermatids (step 8–19 spermatids) in the epithelium. Little is known regarding the signaling pathways that trigger the disassembly of the apical ES at spermiation. Here, we show that secreted Frizzled-related protein 1 (sFRP1), a putative tumor suppressor gene that is frequently down-regulated in multiple carcinomas, is a crucial regulatory protein for spermiation. The expression of sFRP1 is tightly regulated in adult rat testis to control spermatid adhesion and sperm release at spermiation. Down-regulation of sFRP1 during testicular development was found to coincide with the onset of the first wave of spermiation at approximately age 45 d postpartum, implying that sFRP1 might be correlated with elongated spermatid adhesion conferred by the apical ES before spermiation. Indeed, administration of sFRP1 recombinant protein to the testis in vivo delayed spermiation, which was accompanied by down-regulation of phosphorylated (p)-focal adhesion kinase (FAK)-Tyr397 and retention of nectin-3 adhesion protein at the apical ES. To further investigate the functional relationship between p-FAK-Tyr397 and localization of nectin-3, we overexpressed sFRP1 using lentiviral vectors in the Sertoli-germ cell coculture system. Consistent with the in vivo findings, overexpression of sFRP1 induced down-regulation of p-FAK-Tyr397, leading to a decline in phosphorylation of nectin-3. In summary, this report highlights the critical role of sFRP

  2. The Lithium Vapor Box Divertor

    NASA Astrophysics Data System (ADS)

    Goldston, Robert; Hakim, Ammar; Hammett, Gregory; Jaworski, Michael; Myers, Rachel; Schwartz, Jacob

    2015-11-01

    Projections of scrape-off layer width to a demonstration power plant suggest an immense parallel heat flux, of order 12 GW/m2, which will necessitate nearly fully detached operation. Building on earlier work by Nagayama et al. and by Ono et al., we propose to use a series of differentially pumped boxes filled with lithium vapor to isolate the buffering vapor from the main plasma chamber, allowing stable detachment. This powerful differential pumping is only available for condensable vapors, not conventional gases. We demonstrate the properties of such a system through conservation laws for vapor mass and enthalpy, and then include plasma entrainment and ultimately an estimate of radiated power. We find that full detachment should be achievable with little leakage of lithium to the main plasma chamber. We also present progress towards solving the Navier-Stokes equation numerically for the chain of vapor boxes, including self-consistent wall boundary conditions and fully-developed shocks, as well as concepts for an initial experimental demonstration-of-concept. This work supported by DOE Contract No. DE-AC02-09CH11466.

  3. Deformity in the "Boxing Boys".

    PubMed

    Ferrence, Susan; Bendersky, Gordon

    2005-01-01

    The late Bronze Age wall painting the Boxing Boys (c. 17th-16th century BCE) was excavated in the ancient town of Akrotiri on the Greek island of Thera. This article considers a medical interpretation for the spinal-pelvic anomaly in the anatomy of one of the boys. The artist has depicted a combination of structural anatomical adjustments diagnostic of spondylolisthesis, a forward slippage of one of the lumbar vertebrae. The accurate portrayal of the surface appearance of this condition suggests that the artist painted directly from a live subject. Thus, the Boxing Boys mural may be the earliest visual record of a sports-induced injury. Although the meaning of the wall paintings is unclear, the wild goats (agrimia) on the adjoining walls simulate swayback as a reflection of the boy's torso deformity and share other features with the boxers, adding to the unifying characteristics of the room. The abnormal morphology appears to be the earliest achievement of transforming disease into aesthetic charm on a monumental scale.

  4. Interchangeable breech lock for glove boxes

    SciTech Connect

    Lemonds, David Preston

    2015-11-24

    A breech lock for a glove box is provided that may be used to transfer one or more items into the glove box. The breech lock can be interchangeably installed in place of a plug, glove, or other device in a port or opening of a glove box. Features are provided to aid the removal of items from the breech lock by a gloved operator. The breech lock can be reused or, if needed, can be replaced with a plug, glove, or other device at the port or opening of the glove box.

  5. Repackaging SRS Black Box TRU Waste

    SciTech Connect

    Swale, D. J.; Stone, K.A.; Milner, T. N.

    2006-01-09

    Historically, large items of TRU Waste, which were too large to be packaged in drums for disposal have been packaged in various sizes of custom made plywood boxes at the Savannah River Site (SRS), for many years. These boxes were subsequently packaged into large steel ''Black Boxes'' for storage at SRS, pending availability of Characterization and Certification capability, to facilitate disposal of larger items of TRU Waste. There are approximately 107 Black Boxes in inventory at SRS, each measuring some 18' x 12' x 7', and weighing up to 45,000 lbs. These Black Boxes have been stored since the early 1980s. The project to repackage this waste into Standard Large Boxes (SLBs), Standard Waste Boxes (SWB) and Ten Drum Overpacks (TDOP), for subsequent characterization and WIPP disposal, commenced in FY04. To date, 10 Black Boxes have been repackaged, resulting in 40 SLB-2's, and 37 B25 overpack boxes, these B25's will be overpacked in SLB-2's prior to shipping to WIPP. This paper will describe experience to date from this project.

  6. Duplex unwinding with DEAD-box proteins.

    PubMed

    Jankowsky, Eckhard; Putnam, Andrea

    2010-01-01

    DEAD-box proteins, which comprise the largest helicase family, are involved in virtually all aspects of RNA metabolism. DEAD-box proteins catalyze diverse ATP-driven functions including the unwinding of RNA secondary structures. In contrast to many well-studied DNA and viral RNA helicases, DEAD-box proteins do not rely on translocation on one of the nucleic acid strands for duplex unwinding, but directly load onto helical regions and then locally pry the strands apart in an ATP-dependent fashion. In this chapter, we outline substrate design and unwinding protocols for DEAD-box proteins and focus on the quantitative evaluation of their unwinding activity.

  7. Boxing and chronic brain damage.

    PubMed

    Stiller, J W; Weinberger, D R

    1985-06-01

    A chronic, and at times, progressive neurologic syndrome associated with boxing has been recognized for some time by boxing fans and people involved with the sport. Since Martland's first description of the syndrome in 1929, there has been only one randomly selected study of ex-boxers, that of Roberts, which showed a 17 per cent prevalence of this syndrome among boxers who fought between 1929 and 1955. This syndrome can be progressive but often is not. Furthermore, the extent of occupational exposure is probably a significant risk factor. Because of this, it would be expected that the prevalance of the syndrome in the modern boxer, as well as the amateur, would be significantly less than during the first half of the century, and, indeed, several studies appear to support this. Recent studies provide evidence that brain damage does exist in modern boxers and suggests that "subclinical" brain damage is likely to be more prevalent than obvious clinical dysfunction. There is clearly a discrepancy between subclinical evidence of neurologic involvement (for example, an abnormal CT scan) and signs of clinical neurologic dysfunction (for example, clinical exam and neuropsychological testing). The latter tend to show less frequent and consistent evidence of brain damage in boxers than does the CT scan. Although it is tempting to assume that an abnormal CT scan presages the development of neurologic dysfunction, it is not clear that this is the case. The prevalence of the syndrome, risk for progression to functional deficit, warning signs, and the natural history cannot be defined at this time. The only way to better define these parameters would be a controlled prospective study, which has yet to be undertaken.

  8. PINE Discovery Box, 101 Stimulating Ideas.

    ERIC Educational Resources Information Center

    Busch, Phyllis S.

    This manual is intended for use with the PINE (Projects in Imaginative Nature Education) discovery box in elementary school conservation education. The box contains 21 natural specimens which can serve as the starting point for simple student investigations. Specimens and activities are keyed for grade level. For each item, background information…

  9. Cereal Box Design: An Interdisciplinary Graphics Activity

    ERIC Educational Resources Information Center

    Fitzgerald, Mike; Tsosie, Teri

    2004-01-01

    This article describes cereal box design, an interdisciplinary graphics activity. The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. It lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in…

  10. BLS: Box-fitting Least Squares

    NASA Astrophysics Data System (ADS)

    Kovács, G.; Zucker, S.; Mazeh, T.

    2016-07-01

    BLS (Box-fitting Least Squares) is a box-fitting algorithm that analyzes stellar photometric time series to search for periodic transits of extrasolar planets. It searches for signals characterized by a periodic alternation between two discrete levels, with much less time spent at the lower level.

  11. 49 CFR 38.33 - Fare box.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Fare box. 38.33 Section 38.33 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Buses, Vans and Systems § 38.33 Fare box. Where provided, the...

  12. 49 CFR 38.33 - Fare box.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Fare box. 38.33 Section 38.33 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Buses, Vans and Systems § 38.33 Fare box. Where provided, the...

  13. Box Plots in the Australian Curriculum

    ERIC Educational Resources Information Center

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

  14. 49 CFR 38.33 - Fare box.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Fare box. 38.33 Section 38.33 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Buses, Vans and Systems § 38.33 Fare box. Where provided, the...

  15. Magnetorotational dynamo action in the shearing box

    NASA Astrophysics Data System (ADS)

    Walker, Justin; Boldyrev, Stanislav

    2017-09-01

    Magnetic dynamo action caused by the magnetorotational instability is studied in the shearing-box approximation with no imposed net magnetic flux. Consistent with recent studies, the dynamo action is found to be sensitive to the aspect ratio of the box: it is much easier to obtain in tall boxes (stretched in the direction normal to the disc plane) than in long boxes (stretched in the radial direction). Our direct numerical simulations indicate that the dynamo is possible in both cases, given a large enough magnetic Reynolds number. To explain the relatively larger effort required to obtain the dynamo action in a long box, we propose that the turbulent eddies caused by the instability most efficiently fold and mix the magnetic field lines in the radial direction. As a result, in the long box the scale of the generated strong azimuthal (stream-wise directed) magnetic field is always comparable to the scale of the turbulent eddies. In contrast, in the tall box the azimuthal magnetic flux spreads in the vertical direction over a distance exceeding the scale of the turbulent eddies. As a result, different vertical sections of the tall box are permeated by large-scale non-zero azimuthal magnetic fluxes, facilitating the instability. In agreement with this picture, the cases when the dynamo is efficient are characterized by a strong intermittency of the local azimuthal magnetic fluxes.

  16. Cereal Box Design: An Interdisciplinary Graphics Activity

    ERIC Educational Resources Information Center

    Fitzgerald, Mike; Tsosie, Teri

    2004-01-01

    This article describes cereal box design, an interdisciplinary graphics activity. The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. It lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in…

  17. An effective box trap for capturing lynx

    Treesearch

    Jay A. Kolbe; John R. Squires; Thomas W. Parker

    2003-01-01

    We designed a box trap for capturing lynx (Lynx lynx) that is lightweight, safe, effective, and less expensive than many commercial models. It can be constructed in approximately 3-4 hours from readily available materials. We used this trap to capture 40 lynx 89 times (96% of lynx entering traps) and observed no trapping related injuries. We compare our box...

  18. Box Plots in the Australian Curriculum

    ERIC Educational Resources Information Center

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

  19. 46 CFR 111.81-3 - Cables entering boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Cables entering boxes. 111.81-3 Section 111.81-3...-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-3 Cables entering boxes. Each cable entering... through which a conductor enters must be closed. (b) Cable armor must be secured to the box or fitting. (c...

  20. 46 CFR 111.81-3 - Cables entering boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cables entering boxes. 111.81-3 Section 111.81-3...-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-3 Cables entering boxes. Each cable entering... through which a conductor enters must be closed. (b) Cable armor must be secured to the box or fitting. (c...

  1. 46 CFR 111.81-3 - Cables entering boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Cables entering boxes. 111.81-3 Section 111.81-3...-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-3 Cables entering boxes. Each cable entering... through which a conductor enters must be closed. (b) Cable armor must be secured to the box or fitting. (c...

  2. 46 CFR 111.81-3 - Cables entering boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Cables entering boxes. 111.81-3 Section 111.81-3...-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-3 Cables entering boxes. Each cable entering... through which a conductor enters must be closed. (b) Cable armor must be secured to the box or fitting. (c...

  3. 46 CFR 111.81-3 - Cables entering boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Cables entering boxes. 111.81-3 Section 111.81-3...-GENERAL REQUIREMENTS Outlet Boxes and Junction Boxes § 111.81-3 Cables entering boxes. Each cable entering... through which a conductor enters must be closed. (b) Cable armor must be secured to the box or fitting. (c...

  4. North American box turtles: A natural history

    USGS Publications Warehouse

    Dodd, C. Kenneth

    2002-01-01

    Once a familiar backyard visitor in many parts of the United States and Mexico, the box turtle is losing the battle against extinction. In North American Box Turtles, C. Kenneth Dodd, Jr., has written the first book-length natural history of the twelve species and subspecies of this endangered animal. This volume includes comprehensive information on the species’ evolution, behavior, courtship and reproduction, habitat use, diet, population structure, systematics, and disease. Special features include color photos of all species, subspecies, and their habitats; a simple identification guide to both living and fossil species; and a summary of information on fossil Terrapene and Native uses of box turtles. End-of-chapter sections highlight future research directions, including the need for long-term monitoring and observation of box turtles within their natural habitat and conservation applications. A glossary and a bibliography of literature on box turtles accompany the text.

  5. Boxing injuries: neurologic, radiologic, and neuropsychologic evaluation.

    PubMed

    Ross, R J; Casson, I R; Siegel, O; Cole, M

    1987-01-01

    Boxing is an endeavor that may have to be re-evaluated in the coming years as to whether it should be designated as a sport. It is the only "sport" in which victory is determined by the amount of physical damage done to the opponent. We have presented the largest number of professional and amateur boxers (58) evaluated by various modern diagnostic modalities and have unequivocally demonstrated the deleterious effects of boxing upon the brain. There have been few, if any, meaningful actions taken by the promoters of boxing to correct the conditions under which boxers are subjected to physical abuse. Recommendations regarding the creation of a National Board of Boxing to supervise this "sport" have not been heeded. Suggested safeguards for the boxer, including mandatory medical and boxing history records (passports), use of headgear and approved safe boxing gloves, avoiding blows to the head, improved boxing ring floors, mandatory neurologic examinations, and more competent physicians at ringsides making medical decisions, have essentially not been implemented. The suggestions that mandatory computed tomograms at various stages in a boxer's career be used to determine possible changes of atrophy have not been followed, even when the CT scans have been made available at no cost to the boxers. The effective use of neuropsychologic evaluation, even when offered at no cost, has also been denied. The established medical injuries due to boxing and the lack of any sustained and significant efforts on the part of organized boxing create an atmosphere that is conducive to following the call for the consideration of a ban of boxing.

  6. 6. VIEW OF SPILLWAY TIMBERS AND WATER CONTROL BOX, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF SPILLWAY TIMBERS AND WATER CONTROL BOX, SHOWING WATER CONTROL BOX WITH LOWERED LAKE LEVEL - Three Bears Lake & Dams, Water Control Box, North of Marias Pass, East Glacier Park, Glacier County, MT

  7. The ocular complications of boxing.

    PubMed

    Giovinazzo, V J; Yannuzzi, L A; Sorenson, J A; Delrowe, D J; Cambell, E A

    1987-06-01

    In cooperation with the New York State Athletic Commission, 74 boxers applying for a new or yearly renewal license were sequentially referred over a 2-year period for a complete dilated ocular examination at the Sports Vision Institute of the Manhattan Eye, Ear and Throat Hospital. At least one ocular injury was found in 66% of boxers. Vision-threatening injuries, defined as significant damage to the angle, lens, macula, or peripheral retina occurred in 58% of boxers. Nineteen percent of boxers had angle abnormalities. Nineteen percent of boxers had pathologic cataracts, over 70% of these were posterior subcapsular. Six boxers had macular lesions. A total of 24% of boxers had retinal tears. Standardized photographs were used to distinguish pathologic cataracts from congenital opacities and pathologic retinal tears from atrophic holes. Attempts were made to identify risk factors in boxing that might be predictive for ocular injury. Variables included age, weight division, left- or right-handedness, total number of losses, and total number of bouts. Significant correlations were found between the total number of bouts and the total number of losses, and the presence of retinal tears. College varsity athletes were selected as controls. Significant differences were found between boxers and controls for the total number of injuries, total vision-threatening injuries, and the number of retinal tears. A series of recommendations are proposed to aide in the early detection and prevention of serious ocular injuries.

  8. Hydro-Balanced Stuffing Box field test

    SciTech Connect

    Giangiacomo, L.A.

    1999-05-28

    The Hydro-Balanced Stuffing Box is a seal assembly for polished rod pumping installations commonly used in oil and gas pumping well installations to contain produced well fluids. The improved stuffing box was developed and patented by Harold H. Palmour of The Palmour Group of Livingston, TX. The stuffing box is designed to reduce the incidence of seal leakage and to utilize an environmentally safe fluid, so that if there is any leakage, environmental damage is reduced or eliminated. The unit was tested on two wells at the Rocky Mountain Oilfield Testing Center. During the test period, the performance of the stuffing box was measured by monitoring the pressure on the tubing and the inner chamber with a Barton Two-pen recorder. The amount of safe fluid consumed, fluid leakage at the top of the stuffing box, pressure supplied from the nitrogen bottle, ambient temperature, and polish rod temperature was recorded. The stuffing box is capable of providing a better seal between well fluids an d the environment than conventional stuffing boxes. It allows the polished rod to operate cooler and with lubrication, extending the life of the packing elements, and reducing the amount of attention required to prevent leakage.

  9. High-Density Terminal Box for Testing Wire Harness

    NASA Technical Reports Server (NTRS)

    Pierce, W. B.; Collins, W. G.

    1982-01-01

    Compact terminal box provides access to complex wiring harnesses for testing. Box accommodates more than twice as many wires as previous boxes. Box takes in wires via cable connectors and distributes them to contacts on box face. Instead of separate insulated jacks in metal face panel, box uses pairs of small military-standard metal sockets in precision-drilled plastic panel. Shorting plug provides continuity for wires when not being tested.

  10. HYDROGEN RETENTION IN METAL WASTE BOXES

    SciTech Connect

    MARUSICH, R.M.

    2004-11-18

    The Hanford Waste Management Project Master Documented Safety Analysis (MDSA) (HNF-14741,2003) identifies derived safety controls to prevent or mitigate the risks of a single- container deflagration during operations requiring moving, venting or opening transuranic (TRU)-waste containers. The issue is whether these safety controls are necessary for operations involving TRU-waste boxes that are being retrieved from burial at the Hanford Site. This paper investigates the potential for a deflagration hazard within these boxes and whether safety controls identified for drum deflagration hazards should be applied to operations involving these boxes.

  11. [Present views on boxing--Henner's legacy].

    PubMed

    Tichý, J

    1997-05-29

    Fifty years ago academician Henner formulated clearly the negative view of neurologists on boxing as practised in his time. It was his merit that a protective helmet was introduced, many of his demands concerning the regime after a KO and the importance of medical examinations were no yet adequately appreciated. At the opportunity of the 100th anniversary of Henner's birth and the fiftieth anniversary of the Clinic he founded in the premises of saint Catherine the author discusses contemporary views on boxing, the risk of repeated injuries for the development of encephalopathia pugilistica and their relationship to Alzheimer's disease. Contemporary boxing is a spectacle which is a continuation of historical fights of gladiators. If the main objective is to hurt the adversary, this activity does not deserve the name of "sport" Sport should promote and maintain physical and mental health which is not the case in professional boxing.

  12. Mystery Boxes, X Rays, and Radiology.

    ERIC Educational Resources Information Center

    Thomson, Norman

    2000-01-01

    Indicates the difficulties of teaching concepts beyond light and color and creating memorable learning experiences. Recommends sequential activities using the mystery box approach to explain how scientists and doctors use photon applications. (YDS)

  13. Light Therapy Boxes for Seasonal Affective Disorder

    MedlinePlus

    Diseases and Conditions Seasonal affective disorder (SAD) Light therapy boxes can offer an effective treatment for seasonal affective disorder. Features such as light intensity, safety, cost and style are important considerations. ...

  14. EPA ExpoBox Toolbox Search

    EPA Pesticide Factsheets

    EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant assessment data bases,

  15. EPA EcoBox Tools by Stressors

    EPA Pesticide Factsheets

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  16. EPA EcoBox Phases of ERA

    EPA Pesticide Factsheets

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  17. EPA EcoBox Tools by Effects

    EPA Pesticide Factsheets

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  18. EPA EcoBox Tools by Receptors

    EPA Pesticide Factsheets

    Eco-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases

  19. Black Box Theatres: Cheyenne Mountain High School.

    ERIC Educational Resources Information Center

    Binder, Robert D.

    2002-01-01

    Describes the design of the academic arts building at Cheyenne Mountain High School in Colorado Springs, Colorado, including its black box theater, art classroom, computer graphics lab, gallery, video production area, and chorus classroom. (EV)

  20. Mystery Boxes, X Rays, and Radiology.

    ERIC Educational Resources Information Center

    Thomson, Norman

    2000-01-01

    Indicates the difficulties of teaching concepts beyond light and color and creating memorable learning experiences. Recommends sequential activities using the mystery box approach to explain how scientists and doctors use photon applications. (YDS)

  1. A look inside the actuarial black box.

    PubMed

    Math, S E; Youngerman, H

    1992-12-01

    Hospital executives often rely on actuaries (and their "black boxes") to determine self-insurance program liabilities and funding contributions. Typically, the hospital supplies the actuary with a myriad of statistics, and eventually the hospital receives a liability estimate and recommended funding level. The mysterious actuarial calculations that occur in between data reporting and receipt of the actuary's report are akin to a black box--a complicated device whose internal mechanism is hidden from or mysterious to the user.

  2. BOX-DEATH HOLLOW ROADLESS AREA, UTAH.

    USGS Publications Warehouse

    Weir, Gordon W.; Lane, Michael

    1984-01-01

    Geologic mapping, geochemical sampling, and a search for prospects and mineralized rock in the Box-Death Hollow Roadless Area, Utah indicate that there is little promise for the occurrence of mineral or energy resources in the area. Additional exploratory drilling by industry seems warranted if wells elsewhere in the region find oil or gas in strata as yet untested in the Box-Death Hollow Roadless Area.

  3. ENERGY STAR Certified Set Top Boxes

    EPA Pesticide Factsheets

    Certified models meet all ENERGY STAR requirements as listed in the Version 3.0 ENERGY STAR Program Requirements for Set-top Boxes that are effective as of September 1, 2011 or the Version 4.1 ENERGY STAR Program Requirements for Set-top Boxes that are effective as of December 19, 2014. A detailed listing of key efficiency criteria are available at http://www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=ST

  4. Glove box on vehicular instrument panel

    DOEpatents

    Atarashi, Kazuya

    1985-01-01

    A glove box for the upper surface of an automobile dashboard whereby it may be positioned close to the driver. The glove box lid is pivotally supported by arms extending down either side to swing forwardly for opening. A hook is pivotally support adjacent an arm and weighted to swing into engagement with the arm to prevent opening of the lid during abrupt deceleration. A toggle spring assists in maintaining the lid in either the open or closed position.

  5. BOX DIMENSIONS OF α-FRACTAL FUNCTIONS

    NASA Astrophysics Data System (ADS)

    Akhtar, Md. Nasim; Prasad, M. Guru Prem; Navascués, M. A.

    2016-08-01

    The box dimension of the graph of non-affine, continuous, nowhere differentiable function fα which is a fractal analogue of a continuous function f corresponding to a certain iterated function system (IFS), is investigated in the present paper. The estimates for box dimension of the graph of α-fractal function fα for equally spaced as well as arbitrary data sets are found.

  6. Autoantibodies to box A of high mobility group box 1 in systemic lupus erythematosus.

    PubMed

    Schaper, F; de Leeuw, K; Horst, G; Maas, F; Bootsma, H; Heeringa, P; Limburg, P C; Westra, J

    2017-02-28

    Autoantibodies to nuclear structures are a hallmark of systemic lupus erythematosus (SLE), including autoantibodies to nuclear protein high mobility group box 1 (HMGB1). HMGB1 consists of three separate domains: box A, box B and an acidic tail. Recombinant box A acts as a competitive antagonist for HMGB1 and might be an interesting treatment option in SLE. However, antibodies to box A might interfere. Therefore, levels of anti-box A were examined in SLE patients in association with disease activity and clinical parameters. Serum anti-box A was measured in 86 SLE patients and 44 age- and sex-matched healthy controls (HC). Serum samples of 28 patients with primary Sjögren's syndrome and 32 patients with rheumatoid arthritis were included as disease controls. Anti-HMGB1 and anti-box B levels were also measured by enzyme-linked immunosorbent assay during quiescent disease [SLE Disease Activity Index (SLEDAI) ≤ 4, n = 47] and active disease (SLEDAI ≥ 5, n = 39). Anti-box A levels in active SLE patients were higher compared to quiescent patients, and were increased significantly compared to HC and disease controls. Anti-box A levels correlated positively with SLEDAI and anti-dsDNA levels and negatively with complement C3 levels. Increased levels of anti-box A antibodies were present in the majority of patients with nephritic (73%) and non-nephritic exacerbations (71%). Antibodies to the box A domain of HMGB1 might be an interesting new biomarker, as these had a high specificity for SLE and were associated with disease activity. Longitudinal studies should be performed to evaluate whether these antibodies perform better in predicting an exacerbation, especially non-nephritic exacerbations.

  7. Amateur boxing: physical and physiological attributes.

    PubMed

    Chaabène, Helmi; Tabben, Montassar; Mkaouer, Bessem; Franchini, Emerson; Negra, Yassine; Hammami, Mehrez; Amara, Samiha; Chaabène, Raja Bouguezzi; Hachana, Younés

    2015-03-01

    Boxing is one of the oldest combat sports. The aim of the current review is to critically analyze the amateur boxer's physical and physiological characteristics and to provide practical recommendations for training as well as new areas of scientific research. High-level male and female boxers show a propensity for low body fat levels. Although studies on boxer somatotypes are limited, the available information shows that elite-level male boxers are characterized by a higher proportion of mesomorphy with a well-developed muscle mass and a low body fat level. To help support the overall metabolic demands of a boxing match and to accelerate the recovery process between rounds, athletes of both sexes require a high level of cardiorespiratory fitness. International boxers show a high peak and mean anaerobic power output. Muscle strength in both the upper and lower limbs is paramount for a fighter's victory and is one of the keys to success in boxing. As boxing punches are brief actions and very dynamic, high-level boxing performance requires well-developed muscle power in both the upper and lower limbs. Albeit limited, the available studies reveal that isometric strength is linked to high-level boxing performance. Future investigations into the physical and physiological attributes of boxers are required to enrich the current data set and to help create a suitable training program.

  8. HYDROGEN AND VOC RETENTION IN WASTE BOXES

    SciTech Connect

    PACE ME; MARUSICH RM

    2008-11-21

    The Hanford Waste Management Project Master Documented Safety Analysis (MDSA) (HNF-14741, 2003) identifies derived safety controls to prevent or mitigate the risks of a single-container deflagration during operations requiring moving, venting or opening transuranic (TRU)-waste containers. The issue is whether these safety controls are necessary for operations involving TRU-waste boxes that are being retrieved from burial at the Hanford Site. This paper investigates the potential for a deflagration hazard within these boxes and whether safety controls identified for drum deflagration hazards should be applied to operations involving these boxes. The study evaluates the accumulation of hydrogen and VOCs within the waste box and the transport of these gases and vapors out of the waste box. To perform the analysis, there were numerous and major assumptions made regarding the generation rate and the transport pathway dimensions and their number. Since there is little actual data with regards to these assumptions, analyses of three potential configurations were performed to obtain some indication of the bounds of the issue (the concentration of hydrogen or flammable VOCs within a waste box). A brief description of each of the three cases along with the results of the analysis is summarized.

  9. Box-Cox transformation for QTL mapping.

    PubMed

    Yang, Runqing; Yi, Nengjun; Xu, Shizhong

    2006-01-01

    The maximum likelihood method of QTL mapping assumes that the phenotypic values of a quantitative trait follow a normal distribution. If the assumption is violated, some forms of transformation should be taken to make the assumption approximately true. The Box-Cox transformation is a general transformation method which can be applied to many different types of data. The flexibility of the Box-Cox transformation is due to a variable, called transformation factor, appearing in the Box-Cox formula. We developed a maximum likelihood method that treats the transformation factor as an unknown parameter, which is estimated from the data simultaneously along with the QTL parameters. The method makes an objective choice of data transformation and thus can be applied to QTL analysis for many different types of data. Simulation studies show that (1) Box-Cox transformation can substantially increase the power of QTL detection; (2) Box-Cox transformation can replace some specialized transformation methods that are commonly used in QTL mapping; and (3) applying the Box-Cox transformation to data already normally distributed does not harm the result.

  10. Yeast TATA-box transcription factor gene.

    PubMed

    Schmidt, M C; Kao, C C; Pei, R; Berk, A J

    1989-10-01

    The first step in the transcription of most protein-encoding genes in eukaryotes is the binding of a transcription factor to the TATA-box promoter element. This TATA-box transcription factor was purified from extracts of the yeast Saccharomyces cerevisiae by using reconstitution of in vitro transcription reactions as an assay. The activity copurified with a protein whose sodium dodecyl sulfate/polyacrylamide gel mobility is 25 kDa. The sequence of the amino-terminal 21 residues of this protein was determined by sequential Edman degradation. A yeast genomic library was screened with mixed oligonucleotides encoding six residues of the protein sequence. The yeast TATA-box factor gene was cloned, and DNA sequencing revealed a 720-base-pair open reading frame encoding a 27,016-Da protein. The identity of the clone was confirmed by expressing the gene in Escherichia coli and detecting TATA-box factor DNA binding and transcriptional activities in extracts of the recombinant E. coli. The TATA-box factor gene was mapped to chromosome five of S. cerevisiae. RNA blot hybridization and nuclease S1 analysis indicated that the major TATA-box factor mRNA is 1.3 kilobases, including an unusually long 5' untranslated region of 188 +/- 5 nucleotides. Homology searches showed a region of distant similarity to the calcium-binding structures of calpains, a structure that has a conformation similar to the helix-turn-helix motif of DNA binding proteins.

  11. 31 CFR 500.326 - Custody of safe deposit boxes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Custody of safe deposit boxes. 500... Definitions § 500.326 Custody of safe deposit boxes. Safe deposit boxes shall be deemed to be in the custody not only of all persons having access thereto but also of the lessors of such boxes whether or...

  12. 46 CFR 78.47-10 - Manual alarm boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Manual alarm boxes. 78.47-10 Section 78.47-10 Shipping... and Emergency Equipment, Etc. § 78.47-10 Manual alarm boxes. (a) In all new installations, manual alarm boxes shall be clearly and permanently marked “IN CASE OF FIRE BREAK GLASS.” Existing boxes not...

  13. 48 CFR 908.7118 - Rental of post office boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... boxes. 908.7118 Section 908.7118 Federal Acquisition Regulations System DEPARTMENT OF ENERGY COMPETITION... post office boxes. DOE offices and authorized contractors may rent post office boxes on an annual basis... the whole period or at the beginning of each quarter in which the box is to be used....

  14. 31 CFR 515.326 - Custody of safe deposit boxes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Custody of safe deposit boxes. 515... Definitions § 515.326 Custody of safe deposit boxes. Safe deposit boxes shall be deemed to be in the custody not only of all persons having access thereto but also of the lessors of such boxes whether or...

  15. Subsurface defect detection in first layer of pavement structure and reinforced civil engineering structure by FRP bonding using active infrared thermography

    NASA Astrophysics Data System (ADS)

    Dumoulin, Jean; Ibos, Laurent

    2010-05-01

    In many countries road network ages while road traffic and maintenance costs increase. Nowadays, thousand and thousand kilometers of roads are each year submitted to surface distress survey. They generally lean on pavement surface imaging measurement techniques, mainly in the visible spectrum, coupled with visual inspection or image processing detection of emergent distresses. Nevertheless, optimisation of maintenance works and costs requires an early detection of defects within the pavement structure when they still are hidden from surface. Accordingly, alternative measurement techniques for pavement monitoring are currently under investigation (seismic methods, step frequency radar). On the other hand, strengthening or retrofitting of reinforced concrete structures by externally bonded Fiber Reinforced Polymer (FRP) systems is now a commonly accepted and widespread technique. However, the use of bonding techniques always implies following rigorous installing procedures. To ensure the durability and long-term performance of the FRP reinforcements, conformance checking through an in situ auscultation of the bonded FRP systems is then highly suitable. The quality-control program should involve a set of adequate inspections and tests. Visual inspection and acoustic sounding (hammer tap) are commonly used to detect delaminations (disbonds) but are unable to provide sufficient information about the depth (in case of multilayered composite) and width of debonded areas. Consequently, rapid and efficient inspection methods are also required. Among the non destructive methods under study, active infrared thermography was investigated both for pavement and civil engineering structures through experiments in laboratory and numerical simulations, because of its ability to be also used on field. Pulse Thermography (PT), Pulse Phase Thermography (PPT) and Principal Component Thermography (PCT) approaches have been tested onto pavement samples and CFRP bonding on concrete

  16. Slat Heater Boxes for Thermal Vacuum Testing

    NASA Technical Reports Server (NTRS)

    Ungar, Eugene

    2003-01-01

    Slat heater boxes have been invented for controlling the sink temperatures of objects under test in a thermal vacuum chamber, the walls of which are cooled to the temperature of liquid nitrogen. A slat heater box (see Figure 1) includes a framework of struts that support electrically heated slats that are coated with a high-emissivity optically gray paint. The slats can be grouped together into heater zones for the purpose of maintaining an even temperature within each side. The sink temperature of an object under test is defined as the steady-state temperature of the object in the vacuum/ radiative environment during the absence of any internal heat source or sink. The slat heater box makes it possible to closely control the radiation environment to obtain a desired sink temperature. The slat heater box is placed inside the cold thermal vacuum chamber, and the object under test is placed inside (but not in contact with) the slat heater box. The slat heaters occupy about a third of the field of view from any point on the surface of the object under test, the remainder of the field of view being occupied by the cold chamber wall. Thus, the radiation environment is established by the combined effects of the slat heater box and the cold chamber wall. Given (1) the temperature of the chamber wall, (2) the fractions of the field of view occupied by the chamber wall and the slat heater box, and (3) the emissivities of the slats, chamber wall, and the surface of object under test, the slat temperature required to maintain a desired sink temperature can be calculated by solving the equations of gray-body radiation for the steady-state adiabatic case (equal absorption and emission by the object under test). Slat heater boxes offer an important advantage over the infrared lamps that have been previously used to obtain desired sink temperatures: In comparison with an infrared lamp, a slat heater box provides a greater degree of sink temperature uniformity for a test

  17. Solar box cookers and geothermal energy

    SciTech Connect

    Not Available

    1988-12-01

    A major amount of world-wide forest depletion is caused by harvesting cooking wood. Solar box cookers can help to ameliorate this situation in that they use solar energy instead of wood to cook food. Usable year-round in the tropics and for 6 to 8 months of the year in most sunny areas of the world, the cookers can cook almost anything if there is 15 minutes of sunshine every hour. Developed in 1976 solar box cookers represent a major advance over early solar cookers. Solar box cookers are about the size of an ice chest, easily constructed by the users themselves and inexpensive. The cookers are made of cardboard or wood, and aluminum foil. Each box is topped with a sheet of glass above which an adjustable reflective lid is positioned to angle in sunlight. The food cooks in covered, dark-colored pans. One cooker can cook 10-15 pounds of food in three to five hours. Fruits, vegetables, meats, and any baked goods can be prepared, and water and milk pasteurized in them. The coking food does not have to be stirred and will not burn. The developer is also looking for ways the geothermal community could interface with solar box cookers.

  18. BMI Sandwich Wing Box Analysis and Test

    NASA Technical Reports Server (NTRS)

    Palm, Tod; Mahler, Mary; Shah, Chandu; Rouse, Marshall; Bush, Harold; Wu, Chauncey; Small, William J.

    2000-01-01

    A composite sandwich single bay wing box test article was developed by Northrop Grumman and tested recently at NASA Langley Research Center. The objectives for the wing box development effort were to provide a demonstration article for manufacturing scale up of structural concepts related to a high speed transport wing, and to validate the structural performance of the design. The box concept consisted of highly loaded composite sandwich wing skins, with moderately loaded composite sandwich spars. The dimensions of the box were chosen to represent a single bay of the main wing box, with a spar spacing of 30 inches, height of 20 inches constant depth, and length of 64 inches. The bismaleimide facesheet laminates and titanium honeycomb core chosen for this task are high temperature materials able to sustain a 300F service temperature. The completed test article is shown in Figure 1. The tests at NASA Langley demonstrated the structures ability to sustain axial tension and compression loads in excess of 20,000 lb/in, and to maintain integrity in the thermal environment. Test procedures, analysis failure predictions, and test results are presented.

  19. Pharmacy Students’ Knowledge of Black Box Warnings

    PubMed Central

    Shireman, Theresa I.; Generali, Joyce; Rigler, Sally; Mayorga, Angela

    2010-01-01

    Objective To evaluate the progression of pharmacy students’ knowledge of black box warnings across 3 years of didactic training, and to determine how they stay current with new warnings. Methods A cross-sectional survey instrument was administered to pharmacy students in their first (P1), second (P2), and third (P3) professional years. The survey assessed student awareness of medications possessing a black box warning and familiarity with the warning content for 20 medications (15 with and 5 without warnings). Results Mean number of correct responses identifying the presence or absence of a black box warning among the 20 medications were 5.8 ± 3.3, 9.6 ± 4.0, and 14.8 ± 2.8 for the P1, P2, and P3 students, respectively. Knowledge of black box warning content was variable. Students were least aware of the warning content for stavudine and enoxaparin. Students were most familiar with the warning content for paroxetine and estrogen. Conclusion Students’ awareness and understanding of black box warnings was proportional to their educational progression, but their knowledge level was inconsistent across drug groups. PMID:20221356

  20. Pharmacy students' knowledge of black box warnings.

    PubMed

    Moeller, Karen E; Shireman, Theresa I; Generali, Joyce; Rigler, Sally; Mayorga, Angela

    2010-02-10

    To evaluate the progression of pharmacy students' knowledge of black box warnings across 3 years of didactic training, and to determine how they stay current with new warnings. A cross-sectional survey instrument was administered to pharmacy students in their first (P1), second (P2), and third (P3) professional years. The survey assessed student awareness of medications possessing a black box warning and familiarity with the warning content for 20 medications (15 with and 5 without warnings). Mean number of correct responses identifying the presence or absence of a black box warning among the 20 medications were 5.8 +/- 3.3, 9.6 +/- 4.0, and 14.8 +/- 2.8 for the P1, P2, and P3 students, respectively. Knowledge of black box warning content was variable. Students were least aware of the warning content for stavudine and enoxaparin. Students were most familiar with the warning content for paroxetine and estrogen. Students' awareness and understanding of black box warnings was proportional to their educational progression, but their knowledge level was inconsistent across drug groups.

  1. Performance et caracterisation a l'arrachement des tiges en FRP de carbone utilisees pour renforcement au cisaillement par la methode ETS

    NASA Astrophysics Data System (ADS)

    Ammar Khodja, L'Hady

    The rehabilitation and strengthening concrete structures in shear using composite materials such as externally bonded (EB) or near surface mounted rebar (NSMR) are well established techniques. However, debonding of these strengthening materials is still present and constitute the principal cause of shear failure of beams strengthened with composite materials. A new method called ETS (Embedded Through Section) was recently developed in order to avoid premature failures due to debonding of composite materials. The objective of this study is to highlight the importance and influence of important parameters on the behavior of CFRP bars anchorages subjected to pullout forces. These parameters are: concrete strength, anchorage length of CFRP bars, hole diameter in concrete, diameter of the bar and CFRP surface type (smooth versus sanded). Understanding the influence of these parameters on the relationship between the pullout force and the slip is paramount. This allows an accurate description of the behavior of all elements that contribute to the resistance of the CFRP bars pullout. A series of 25 specimens were subjected to pullout tests. The impact of these parameters on the pullout performance of CFRP rods is summarized in terms of failure mode, ultimate tensile strength and loading force slip relationship. The results of these investigations show that using the ETS method, failure of the anchors can be avoided by providing adequate anchorage length and concrete strength. The method provides greater confinement and thus leads to a substantial improvement in the performance of anchors. As a result, designers will be able to avoid failures that are due to debonding of anchors using thereby the full capabilities of reinforced beams strengthened in shear with EB FRP. Keywords: ETS method, shear, strengthening, anchor, slip, FRP, NSM.

  2. Advances in the theory of box integrals

    SciTech Connect

    Bailey, David H.; Borwein, J.M.; Crandall, R.E.

    2009-06-25

    Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.

  3. Promotion of solar box cooker technology

    SciTech Connect

    Stibravy, R.

    1992-09-01

    Over 1.5 billion people are affected by fuel wood shortage, according to the UN Food and Agricultural Organization. Meanwhile solar cookers are under-exploited. The author presents one version of this technology and discusses how it may be promoted world-wide. The increased use of non fossil fuel energy is essential world-wide in combating global warming trends, preserving the environment, conserving resources and achieving sustainable development. The Solar Box Cooker (SBC) - a box within a box - uses an easily available source of such energy that is also renewable (in contrast to energy that, once used, is not, such as oil, coal, gas, wood). It is also readily available for the developing world, and for much of the developed world too.

  4. Nearly Seamless Vacuum-Insulated Boxes

    NASA Technical Reports Server (NTRS)

    Stepanian, Christopher J.; Ou, Danny; Hu, Xiangjun

    2010-01-01

    A design concept, and a fabrication process that would implement the design concept, have been proposed for nearly seamless vacuum-insulated boxes that could be the main structural components of a variety of controlled-temperature containers, including common household refrigerators and insulating containers for shipping foods. In a typical case, a vacuum-insulated box would be shaped like a rectangular parallelepiped conventional refrigerator box having five fully closed sides and a hinged door on the sixth side. Although it is possible to construct the five-closed-side portion of the box as an assembly of five unitary vacuum-insulated panels, it is not desirable to do so because the relatively high thermal conductances of the seams between the panels would contribute significant amounts of heat leakage, relative to the leakage through the panels themselves. In contrast, the proposal would make it possible to reduce heat leakage by constructing the five-closed-side portion of the box plus the stationary portion (if any) of the sixth side as a single, seamless unit; the only remaining seam would be the edge seal around the door. The basic cross-sectional configuration of each side of a vacuum-insulated box according to the proposal would be that of a conventional vacuum-insulated panel: a low-density, porous core material filling a partially evacuated space between face sheets. However, neither the face sheets nor the core would be conventional. The face sheets would be opposite sides of a vacuum bag. The core material would be a flexible polymer-modified silica aerogel of the type described in Silica/Polymer and Silica/Polymer/Fiber Composite Aero - gels (MSC-23736) in this issue of NASA Tech Briefs. As noted in that article, the stiffness of this core material against compression is greater than that of prior aerogels. This is an important advantage because it translates to greater retention of thickness and, hence, of insulation performance when pressure is

  5. Helical fold prediction for the cyclin box.

    PubMed

    Bazan, J F

    1996-01-01

    The smooth progression of the eukaryotic cell cycle relies on the periodic activation of members of a family of cell cycle kinases by regulatory proteins called cyclins. Outside of the cell cycle, cyclin homologs play important roles in regulating the assembly of transcription complexes; distant structural relatives of the conserved cyclin core or "box" can also function as general transcription factors (like TFIIB) or survive embedded in the chain of the tumor suppressor, retinoblastoma protein. The present work attempts the prediction of the canonical secondary, supersecondary, and tertiary fold of the minimal cyclin box domain using a combination of techniques that make use of the evolutionary information captured in a multiple alignment of homolog sequences. A tandem set of closely packed, helical modules are predicted to form the cyclin box domain.

  6. CASAS: A Smart Home in a Box.

    PubMed

    Cook, Diane J; Crandall, Aaron S; Thomas, Brian L; Krishnan, Narayanan C

    2013-07-01

    While the potential benefits of smart home technology are widely recognized, a lightweight design is needed for the benefits to be realized at a large scale. We introduce the CASAS "smart home in a box", a lightweight smart home design that is easy to install and provides smart home capabilities out of the box with no customization or training. We discuss types of data analysis that have been performed by the CASAS group and can be pursued in the future by using this approach to designing and implementing smart home technologies.

  7. FRAC-IN-THE-BOX utilization

    SciTech Connect

    Collins, D.G.; West, J.T.

    1989-06-01

    FRAC-IN-THE-BOX is a computer code developed to calculate the fractions of rectangular parallelepiped mesh cell volumes that are intersected by combinatorial geometry type zones. The geometry description used in the code is a subset of the combinatorial geometry used in SABRINA. The input file may be read into SABRINA and three dimensional plots made of the input geometry. The volume fractions for those portions of the geometry that are too complicated to describe with the geometry routines provided in FRAC-IN-THE-BOX may be calculated in SABRINA and merged with the volume fractions computed for the remainder of the geometry. 21 figs., 1 tab.

  8. Argon purge gas cooled by chill box

    NASA Technical Reports Server (NTRS)

    Spiro, L. W.

    1966-01-01

    Cooling argon purge gas by routing it through a shop-fabricated chill box reduces charring of tungsten inert gas torch head components. The argon gas is in a cooled state as it enters the torch and prevents buildup of char caused by the high concentrations of heat in the weld area during welding operations.

  9. 30 CFR 56.12006 - Distribution boxes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Distribution boxes. 56.12006 Section 56.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  10. 30 CFR 57.12006 - Distribution boxes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Distribution boxes. 57.12006 Section 57.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Electricity...

  11. 30 CFR 57.12006 - Distribution boxes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Distribution boxes. 57.12006 Section 57.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Electricity...

  12. 30 CFR 56.12006 - Distribution boxes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Distribution boxes. 56.12006 Section 56.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  13. 30 CFR 56.12006 - Distribution boxes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distribution boxes. 56.12006 Section 56.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  14. 30 CFR 56.12006 - Distribution boxes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Distribution boxes. 56.12006 Section 56.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  15. 30 CFR 56.12006 - Distribution boxes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Distribution boxes. 56.12006 Section 56.12006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity §...

  16. Quantum Nonlocal Boxes Exhibit Stronger Distillability

    NASA Astrophysics Data System (ADS)

    Høyer, Peter; Rashid, Jibran

    2013-06-01

    The hypothetical nonlocal box (NLB) proposed by Popescu and Rohrlich allows two spatially separated parties, Alice and Bob, to exhibit stronger than quantum correlations. If the generated correlations are weak, they can sometimes be distilled into a stronger correlation by repeated applications of the NLB. Motivated by the limited distillability of NLBs, we initiate here a study of the distillation of correlations for nonlocal boxes that output quantum states rather than classical bits (qNLBs). We propose a new protocol for distillation and show that it asymptotically distills a class of correlated quantum nonlocal boxes to the value (1)/(2)(3√ {3}+1) ≈ 3.098076, whereas in contrast, the optimal non-adaptive parity protocol for classical nonlocal boxes asymptotically distills only to the value 3.0. We show that our protocol is an optimal non-adaptive protocol for 1, 2 and 3 qNLB copies by constructing a matching dual solution for the associated primal semidefinite program (SDP). We conclude that qNLBs are a stronger resource for nonlocality than NLBs. The main premise that develops from this conclusion is that the NLB model is not the strongest resource to investigate the fundamental principles that limit quantum nonlocality. As such, our work provides strong motivation to reconsider the status quo of the principles that are known to limit nonlocal correlations under the framework of qNLBs rather than NLBs.

  17. Minimal Solutions to the Box Problem

    ERIC Educational Resources Information Center

    Chuang, Jer-Chin

    2009-01-01

    The "box problem" from introductory calculus seeks to maximize the volume of a tray formed by folding a strictly rectangular sheet from which identical squares have been cut from each corner. In posing such questions, one would like to choose integral side-lengths for the sheet so that the excised squares have rational or integral side-length.…

  18. EPA ExpoBox Related Links

    EPA Pesticide Factsheets

    EPA ExpoBox is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases,

  19. Expo-Box: Submit Tool Information

    EPA Pesticide Factsheets

    EPA-Expo-Box is a toolbox for exposure assessors. Its purpose is to provide a compendium of exposure assessment and risk characterization tools that will present comprehensive step-by-step guidance and links to relevant exposure assessment data bases, mode

  20. On the Strength of Box Type Fuselages

    NASA Technical Reports Server (NTRS)

    Mathar, J

    1929-01-01

    The present investigation relates to a box-type fuselage with sides consisting of thin smooth sheet metal, stiffened by longitudinal members riveted to the flanged channel-section bulkheads or transverse frames and to the semicircular corrugated corner stiffenings. The results obtained in this particular case can be applied to a great number of similar structures.

  1. Cereal Box Design: An Interdisciplinary Graphics Activity

    ERIC Educational Resources Information Center

    Fitzgerald, Mike; Tsosie, Teri

    2012-01-01

    The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. Also, it lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in depth. The activity introduces a wide range of topics. They include graphic…

  2. Nest Boxes Artificial Homes for Woodland Mammals.

    ERIC Educational Resources Information Center

    Decker, Daniel J.; Kelley, John W.

    1983-01-01

    Provides instructions for constructing artificial "homes" for squirrels, raccoons, and rabbits. These include squirrel dens constructed from discarded automobile tires and squirrel nest boxes, raccoon dens, and rabbit burrows constructed from wood. Includes a chart giving dimensions of materials needed and suggestions on where to place the…

  3. Draw-a-Scientist/Mystery Box Redux

    ERIC Educational Resources Information Center

    Cavallo, Ann

    2007-01-01

    It is important that students have the opportunity to experience the nature and processes of science for themselves. The sequence of activities presented in this paper--Draw-a-Scientist and the Mystery Box Redux--were designed to help students better understand the nature of science (NOS) and engage them in the process of scientific inquiry. These…

  4. Minimal Solutions to the Box Problem

    ERIC Educational Resources Information Center

    Chuang, Jer-Chin

    2009-01-01

    The "box problem" from introductory calculus seeks to maximize the volume of a tray formed by folding a strictly rectangular sheet from which identical squares have been cut from each corner. In posing such questions, one would like to choose integral side-lengths for the sheet so that the excised squares have rational or integral side-length.…

  5. Cereal Box Design: An Interdisciplinary Graphics Activity

    ERIC Educational Resources Information Center

    Fitzgerald, Mike; Tsosie, Teri

    2012-01-01

    The cereal box design activity is intriguing both for its simplicity and the resourcefulness that it can generate in young people. Also, it lends itself to a variety of curriculums. It covers both consumerism and Design for the Environment (DfE) concepts broadly and in depth. The activity introduces a wide range of topics. They include graphic…

  6. Hazard Analysis of Japanese Boxed Lunches (Bento).

    ERIC Educational Resources Information Center

    Bryan, Frank L.; And Others

    1991-01-01

    For the purposes of identifying contaminants, of assessing risks, and of determining critical food processing control points, hazard analyses were conducted at two "bento" (oriental boxed meals) catering operations. Time and temperature abuses during the holding period, after cooking and prior to consumption, were found to be the primary…

  7. One-Dimensional Oscillator in a Box

    ERIC Educational Resources Information Center

    Amore, Paolo; Fernandez, Francisco M.

    2010-01-01

    We discuss a quantum-mechanical model of two particles that interact by means of a harmonic potential and are confined to a one-dimensional box with impenetrable walls. We apply perturbation theory to the cases of different and equal masses and analyse the symmetry of the states in the latter case. We compare the approximate perturbation results…

  8. Fast box-counting algorithm on GPU.

    PubMed

    Jiménez, J; Ruiz de Miras, J

    2012-12-01

    The box-counting algorithm is one of the most widely used methods for calculating the fractal dimension (FD). The FD has many image analysis applications in the biomedical field, where it has been used extensively to characterize a wide range of medical signals. However, computing the FD for large images, especially in 3D, is a time consuming process. In this paper we present a fast parallel version of the box-counting algorithm, which has been coded in CUDA for execution on the Graphic Processing Unit (GPU). The optimized GPU implementation achieved an average speedup of 28 times (28×) compared to a mono-threaded CPU implementation, and an average speedup of 7 times (7×) compared to a multi-threaded CPU implementation. The performance of our improved box-counting algorithm has been tested with 3D models with different complexity, features and sizes. The validity and accuracy of the algorithm has been confirmed using models with well-known FD values. As a case study, a 3D FD analysis of several brain tissues has been performed using our GPU box-counting algorithm.

  9. Nest Boxes Artificial Homes for Woodland Mammals.

    ERIC Educational Resources Information Center

    Decker, Daniel J.; Kelley, John W.

    1983-01-01

    Provides instructions for constructing artificial "homes" for squirrels, raccoons, and rabbits. These include squirrel dens constructed from discarded automobile tires and squirrel nest boxes, raccoon dens, and rabbit burrows constructed from wood. Includes a chart giving dimensions of materials needed and suggestions on where to place the…

  10. Hazard Analysis of Japanese Boxed Lunches (Bento).

    ERIC Educational Resources Information Center

    Bryan, Frank L.; And Others

    1991-01-01

    For the purposes of identifying contaminants, of assessing risks, and of determining critical food processing control points, hazard analyses were conducted at two "bento" (oriental boxed meals) catering operations. Time and temperature abuses during the holding period, after cooking and prior to consumption, were found to be the primary…

  11. Library Technology: The Black Box Syndrome.

    ERIC Educational Resources Information Center

    Stevens, Norman

    1983-01-01

    Presents overview of library uses of automation, noting the earliest example of a "black box" in 1588, the "indicator" invented in England in 1863, various forms of card catalogs, and computer solutions posed by Vannevar Bush, J. C. R. Licklider, Project Intrex, and John G. Kemeny. Ten references are cited. (EJS)

  12. One-Dimensional Oscillator in a Box

    ERIC Educational Resources Information Center

    Amore, Paolo; Fernandez, Francisco M.

    2010-01-01

    We discuss a quantum-mechanical model of two particles that interact by means of a harmonic potential and are confined to a one-dimensional box with impenetrable walls. We apply perturbation theory to the cases of different and equal masses and analyse the symmetry of the states in the latter case. We compare the approximate perturbation results…

  13. Learning Geography with a "Geography Box"

    ERIC Educational Resources Information Center

    Lambrinos, Nikos; Bibou, Ioanna

    2006-01-01

    It seems that geography teaching faces almost the same problems around the world. Geography teachers try to find new methods to teach geography based mainly on pupils' experiences. This paper describes a teaching approach that focuses on what pupils think about geography. The children are asked to prepare and present a box filled with objects that…

  14. 36 CFR 1192.33 - Fare box.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Fare box. 1192.33 Section 1192.33 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Buses, Vans and...

  15. 36 CFR 1192.33 - Fare box.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Fare box. 1192.33 Section 1192.33 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Buses, Vans and...

  16. 36 CFR 1192.33 - Fare box.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Fare box. 1192.33 Section 1192.33 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Buses, Vans and...

  17. 36 CFR 1192.33 - Fare box.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Fare box. 1192.33 Section 1192.33 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES Buses, Vans and...

  18. Mystery Boxes: Helping Children Improve Their Reasoning

    ERIC Educational Resources Information Center

    Rule, Audrey C.

    2007-01-01

    This guest editorial describes ways teachers can use guessing games about an unknown item in a "mystery box" to help children improve their abilities to listen to others, recall information, ask purposeful questions, classify items by class, make inferences, synthesize information, and draw conclusions. The author presents information…

  19. Hadron scattering in an asymmetric box*

    NASA Astrophysics Data System (ADS)

    China Lattice QCD Collaboration; Li, Xin; Chen, Ying; Meng, Guo-Zhan; Feng, Xu; Gong, Ming; He, Song; Li, Gang; Liu, Chuan; Liu, Yu-Bin; Ma, Jian-Ping; Meng, Xiang-Fei; Shen, Yan; Zhang, Jian-Bo

    2007-06-01

    We propose to study hadron-hadron scattering using lattice QCD in an asymmetric box which allows one to access more non-degenerate low-momentum modes for a given volume. The conventional Lüscher's formula applicable in a symmetric box is modified accordingly. To illustrate the feasibility of this approach, pion-pion elastic scattering phase shifts in the I = 2, J = 0 channel are calculated within quenched approximation using improved gauge and Wilson fermion actions on anisotropic lattices in an asymmetric box. After the chiral and continuum extrapolation, we find that our quenched results for the scattering phase shifts in this channel are consistent with the experimental data when the three-momentum of the pion is below 300MeV. Agreement is also found when compared with previous theoretical results from lattice and other means. Moreover, with the usage of asymmetric volume, we are able to compute the scattering phases in the low-momentum range (pion three momentum less than about 350MeV in the center of mass frame) for over a dozen values of the pion three-momenta, much more than using the conventional symmetric box with comparable volume.

  20. Draw-a-Scientist/Mystery Box Redux

    ERIC Educational Resources Information Center

    Cavallo, Ann

    2007-01-01

    It is important that students have the opportunity to experience the nature and processes of science for themselves. The sequence of activities presented in this paper--Draw-a-Scientist and the Mystery Box Redux--were designed to help students better understand the nature of science (NOS) and engage them in the process of scientific inquiry. These…

  1. Study of WATCH GRB Error Boxes

    NASA Astrophysics Data System (ADS)

    Gorosabel, J.; Castro-Tirado, A. J.; Lund, N.; Brandt, S.; Guziy, S.; Shlyapnikov, A.

    1995-09-01

    We have studied the first WATCH GRB Catalogue ofγ-ray Bursts in order to find correlations between WATCH GRB error boxes and a great variety of celestial objects present in 33 different catalogues. No particular class of objects has been found to be significantly correlated with the WATCH GRBs.

  2. Treasure Boxes. Teacher's Guide. LHS GEMS.

    ERIC Educational Resources Information Center

    Kopp, Jaine; Hosoume, Kimi

    Collections of small objects have often been used in mathematics programs to develop classification and patterning skills. This book synthesizes that body of experience to create a new and original sequence of activities that build upon each other in order to draw out the greatest possible educational richness from the treasures. Treasure Boxes is…

  3. Using Story Boxes in Language Learning

    ERIC Educational Resources Information Center

    Collins, Rita

    2009-01-01

    Story boxes and story bags are containers for holding realia that are used to enhance reading and provide a variety of activities for encouraging language acquisition and use. Whatever the packaging, these are good ways to develop students' interest in books. Using realia, or real-life objects, to teach a foreign language is not a novel concept.…

  4. box modeling of the eastern mediterranean sea

    NASA Astrophysics Data System (ADS)

    Ashkenazy, Y.; Stone, P. H.

    2003-04-01

    Recently (~1990) a new source of deep water formation in the Eastern Mediterranean was found in the southern part of the Aegean sea. Till then, the only source of deep water formation in the Eastern Mediterranean was in the Adriatic sea; the rate of the deep water formation of the new Aegean source is 1Sv=10^6m^3/s, three times larger then the Adriatic source. We develop a simple 3 box-model to study the stability of the thermohaline circulation of the Eastern Mediterranean sea. The 3 boxes represent the Adriatic sea, Aegean sea, and the Ionian sea. The boxes exchange heat and salinity and may be described by a set of nonlinear differential equations. We analytically analyze these equations and find that the system may have one, two, or four stable flux states. We consider two cases for which the temperatures of the boxes are (i) fixed or (ii) variable. After setting the parameters to correspond to the Eastern Mediterranean we find that the system has two stable states, one with (i) two thermally dominant sources of deep water formation in the Adriatic and Aegean and the other with (ii) a salinity dominant source of deep water formation in the Adriatic and a thermally dominant source in the Aegean. While the Adriatic thermally dominant source is comparable to the observed flux of 0.3Sv the Aegean source has much smaller flux than the observed value. This situation is analogous to the state of the thermohaline circulation pre 1990 where the only source of deep water formation was in the Adriatic. If we decrease the atmospheric temperature of the Aegean box by 2C in accordance with recent observations, we find that the deep water formation of the Aegean increases significantly to a value comparable to the recently observed flux.

  5. A tapered box model of the cochlea

    NASA Astrophysics Data System (ADS)

    Sun, Luyang; Ni, Guangjian; Elliott, Stephen

    2015-12-01

    The complicated, three dimensional geometry of the fluid chambers in the cochlea is often represented in models of its mechanics by a box with a uniform area along its length. In this paper we use previous measurements of the variation in area of the two fluid chambers along the length of the cochlea in various mammals, to calculate the variation in the "effective area" that determines the 1D fluid coupling, which is given by the harmonic mean of the two chamber areas. The square root of this effective area is found to vary surprisingly linearly along the cochlea length in several mammalian species. This suggests a variation of the box model in which the width and height of the two fluid chambers are still equal, but now decrease linearly along its length. The width of the basilar membrane, BM, is assumed to increase linearly along the length of the model. The analytic form of the 1D fluid pressure distribution due to elemental BM motion is derived for this tapered box model. The added mass due to the near field acoustic coupling can also be computed, which surprisingly turns out to be almost constant along the length of the BM. The coupled response of the box model with a passive BM can then be readily calculated. Although the pressure distributions due to elemental fluid coupling are very different in the uniform and tapered box models, the distribution of the passive BM response in the coupled models are very similar in the two cases, although the overall level of the response in the tapered model is about 10 dB greater than that in the uniform model.

  6. Bilirubin oxidation products (BOXes): synthesis, stability and chemical characteristics

    PubMed Central

    Wurster, W. L.; Pyne-Geithman, G. J.; Peat, I. R.; Clark, J. F.

    2009-01-01

    Summary Bilirubin oxidation products (BOXes) have been a subject of interest in neurosurgery because they are purported to be involved in subarachnoid hemorrhage induced cerebral vasospasm. There is a growing body of information concerning their putative role in vasospasm; however, there is a dearth of information concerning the chemical and biochemical characteristics of BOXes. A clearer understanding of the synthesis, stability and characteristics of BOXes will be important for a better understanding of the role of BOXes post subarachnoid hemorrhage. We used hydrogen peroxide to oxidize bilirubin and produce BOXes. BOXes were extracted and analyzed using conventional methods such as HPLC and mass spectrometry. Characterization of the stability BOXes demonstrates that light can photodegrade BOXes with a t1/2 of up to 10 h depending upon conditions. Mixed isomers of BOXes have an apparent extinction coefficient of ε = 6985, and a λmax of 310 nm. BOXes are produced by the oxidation of bilirubin, yielding a mixture of isomers: 4-methyl-5-oxo-3-vinyl-(1,5-dihydropyrrol-2-ylidene)acetamide (BOX A) and 3-methyl-5-oxo-4-vinyl-(1,5-dihydropyrrol-2-ylidene)acetamide (BOX B). The BOXes are photodegraded by ambient light and can be analyzed spectrophotometrically with their extinction coefficient as well as with HPLC or mass spectrometry. Their small molecular weight and photodegradation may have made them difficult to characterize in previous studies. PMID:18456996

  7. HMG-box sequences from microbats homologous to the human SOX30 HMG-box.

    PubMed

    Bullejos, M; Díaz de la Guardia, R; Barragán, M J; Sánchez, A

    2000-01-01

    SOX genes are a family of genes that encode for proteins which are characterised by the presence of a HMG-domain related to that of the mammalian sex-determining gene (SRY). By definition, the DNA binding domain of SOX genes is at least 50% identical to the 79 amino acid HMG domain of the SRY gene. We report here two HMG-box sequences from two microbat species (R. ferrumequinum and P. Pipistrellus) which were PCR amplified using a primer pair specific to the mouse Sry HMG-box. The high percentage of identity of this sequences with the human and mouse SOX30 HMG-box suggests that they are the SOX30 HMG-box for these two bat species.

  8. Upstream box/TATA box order is the major determinant of the direction of transcription.

    PubMed Central

    Xu, L C; Thali, M; Schaffner, W

    1991-01-01

    Mammalian gene promoters for transcription by RNA polymerase II are typically organized in the following order: upstream sequence motif(s)/TATA box/initiation site. Here we report studies in which the order, orientation and DNA sequences of these three elements are varied to determine how these affect polarity of transcription. We have constructed promoters with an 'octamer' upstream sequence ATTTGCAT (or its complement ATGCAAAT) in combination with several different TATA boxes and initiation (cap) sites, and tested these promoters in transfection experiments with cultured cells. TATA boxes derived from the adenovirus major late promoter (TATAAAA), immunoglobulin kappa light chain (TTATATA) and heavy chain (TAAATATA) promoter functioned equally well or even better when inverted. Only the beta-globin TATA box (CATAAAA) was poorly active when inverted. In addition, a symmetrical TATA box (TATATATA) derived from a casein gene was very active. Our results suggest that the asymmetry of most TATA boxes (consensus TATAAAA) is not a primary determinant of the polarity of transcription. We also found that the initiation (cap) site, which usually consists of an adenine embedded in a pyrimidine-rich region (PyPyCAPyPyPyPyPy), was permissive towards sequence alterations; even a randomly composed sequence worked well. However, an inverted, hence purine-rich, cap site reduced transcript levels to 1/7th, as did an oligo G sequence. Irrespective of the presence of a cap site, the configuration: 'TATA box/octamer' yielded a strong leftward, rather than rightward transcription. From this, we conclude that the polarity of transcription is primarily determined by the linear order of an upstream sequence relative to a TATA box, rather than by the individual orientations of either of these two elements. Images PMID:1762900

  9. 7. Process areas room. Incinerator and glove boxes (hoods) to ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Process areas room. Incinerator and glove boxes (hoods) to the right. Filter boxes to the left. Looking south. - Plutonium Finishing Plant, Waste Incinerator Facility, 200 West Area, Richland, Benton County, WA

  10. 22. Steering gear box and wheel from starboard side. Mizzen ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. Steering gear box and wheel from starboard side. Mizzen boom has been removed for repairs (note boom cradle just forward of steering gear box). - Schooner C.A. THAYER, Hyde Street Pier, San Francisco, San Francisco County, CA

  11. Double gloves reduce contamination of dry box atmosphere

    NASA Technical Reports Server (NTRS)

    Herbell, T. P.; Quantinetz, M.; Reinhardt, G.

    1965-01-01

    Pair of encased low permeability hand gloves between which an inert gas circulates reduces dry box contamination. This innovation is applicable to dry boxes using radioactive and alkali metal compounds, submicron powders, and liquid metals.

  12. 24. A CORE WORKER DISPLAYS THE CORE BOX AND CORES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. A CORE WORKER DISPLAYS THE CORE BOX AND CORES FOR A BRASS GATE VALVE BODY MADE ON A CORE BOX, CA. 1950. - Stockham Pipe & Fittings Company, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  13. The Box Turtle: Room with a View on Species Decline.

    ERIC Educational Resources Information Center

    Belzer, Bill; Steisslinger, Mary Beth

    1999-01-01

    Surveys salient aspects of eastern box-turtle natural history. Explores the societal and ecological factors that have contributed to the decline of the box-turtle population. Contains 18 references. (WRM)

  14. The Box Turtle: Room with a View on Species Decline.

    ERIC Educational Resources Information Center

    Belzer, Bill; Steisslinger, Mary Beth

    1999-01-01

    Surveys salient aspects of eastern box-turtle natural history. Explores the societal and ecological factors that have contributed to the decline of the box-turtle population. Contains 18 references. (WRM)

  15. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes...

  16. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes...

  17. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes...

  18. A one piece wall box for space electronics

    SciTech Connect

    Greenwood, W.H.

    1995-05-01

    In extraterrestrial applications, satellite payloads have printed circuit modules that are housed in boxes or chassis. The box may be a one piece wall or a segmented wall. These two wall options are compared for function and cost.

  19. 49 CFR 230.104 - Driving box shoes and wedges.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.104 Driving box shoes and wedges. Driving box shoes and wedges...

  20. 49 CFR 230.104 - Driving box shoes and wedges.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.104 Driving box shoes and wedges. Driving box shoes and wedges...

  1. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes...

  2. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes...

  3. Ballast system for maintaining constant pressure in a glove box

    NASA Technical Reports Server (NTRS)

    Shlichta, Paul J. (Inventor)

    1990-01-01

    A ballast system for a glove box including a fixed platform on which is mounted an inflatable bag on top of which resides a cover and a weight. The variable gas volume of the inflatable bag communicates with that of the glove box via a valved tube. The weight and gas volume are selected to maintain a relatively constant pressure in the glove box despite variations in the glove box volume while avoiding the use of complicated valving apparatus.

  4. Demand for nest boxes in laying hens.

    PubMed

    Cooper, J J; Appleby, M C

    1996-04-01

    Domestic hens (Gallus gallus domesticus) from commercial laying strains have been selected for high egg yield and may lay over 300 eggs in their working lives. In conventional wire cages, there is little opportunity to perform either nest seeking or nest building activities, which may lead to frustration each time an egg is laid. To measure the demand for a well-defined nest-site, which may act as a consummatory stimulus for nest seeking behaviour and an appetitive stimulus for nest building behaviour, 16 hens were allowed to work to gain access to a pen containing two littered, enclosed nest boxes. The cost of access to the nest boxes was varied by changing the width of the vertical gap, which divided a home pen containing food, water and a perch from the pen containing the nest boxes (gaps of 220, 140, 125, 110 and 95 mm, compared with mean body width of 117 mm). The number of entries to the nest pen declined with narrowing gap, whilst the number of failed attempts to enter rose, but all 16 hens persevered with entering the nest pen prior to oviposition and laid in the nest boxes. Between 120 and 30 min to oviposition hens made many entries with the 220 mm gap (27.6), but this declined to no entries with 95 mm gap. Hens made few entries in the last half hour prior to ovipositoin (1.3) but there was no significant decline in entries as the gap narrowed (1.1 with 95 mm gap). The number of nest inspections and nest entries also declined with width of gap, but there was no effect on time spent in the nest boxes. Hens passed gaps of 220, and 140 mm to return to the nest pen following oviposition, but did not pass gaps of 125, 110 or 95 mm. We therefore conclude that the narrow gap width can be used to assess the demand for environmental requirements. Hens were willing to pay a high cost to gain access to a nest box prior to oviposition, so prelaying behaviour may be frustrated in hens without a well-defined, littered nest site.

  5. Xkid Is Degraded in a D-Box, KEN-Box, and A-Box-Independent Pathway

    PubMed Central

    Castro, Anna; Vigneron, Suzanne; Bernis, Cyril; Labbé, Jean-Claude; Lorca, Thierry

    2003-01-01

    During mitosis, the Xenopus chromokinesin Kid (Xkid) provides the polar ejection forces needed at metaphase for chromosome congression, and its degradation is required at anaphase to induce chromosome segregation. Despite the fact that the degradation of Xkid at anaphase seems to be a key regulatory factor to induce chromosome movement to the poles, little is known about the mechanisms controlling this proteolysis. We investigated here the degradation pathway of Xkid. We demonstrate that Xkid is degraded both in vitro and in vivo by APC/Cdc20 and APC/Cdh1. We show that, despite the presence of five putative D-box motifs in its sequence, Xkid is proteolyzed in a D-box-independent manner. We identify a domain within the C terminus of this chromokinesin, with sequence GxEN, whose mutation completely stabilizes this protein by both APC/Cdc20 and APC/Cdh1. Moreover, we show that this degradation sequence acts as a transposable motif and induces the proteolysis of a GST-GXEN fusion protein. Finally, we demonstrate that both a D-box and a GXEN-containing peptides completely block APC-dependent degradation of cyclin B and Xkid, indicating that the GXEN domain might mediate the recognition and association of Xkid with the APC. PMID:12773557

  6. Xkid is degraded in a D-box, KEN-box, and A-box-independent pathway.

    PubMed

    Castro, Anna; Vigneron, Suzanne; Bernis, Cyril; Labbé, Jean-Claude; Lorca, Thierry

    2003-06-01

    During mitosis, the Xenopus chromokinesin Kid (Xkid) provides the polar ejection forces needed at metaphase for chromosome congression, and its degradation is required at anaphase to induce chromosome segregation. Despite the fact that the degradation of Xkid at anaphase seems to be a key regulatory factor to induce chromosome movement to the poles, little is known about the mechanisms controlling this proteolysis. We investigated here the degradation pathway of Xkid. We demonstrate that Xkid is degraded both in vitro and in vivo by APC/Cdc20 and APC/Cdh1. We show that, despite the presence of five putative D-box motifs in its sequence, Xkid is proteolyzed in a D-box-independent manner. We identify a domain within the C terminus of this chromokinesin, with sequence GxEN, whose mutation completely stabilizes this protein by both APC/Cdc20 and APC/Cdh1. Moreover, we show that this degradation sequence acts as a transposable motif and induces the proteolysis of a GST-GXEN fusion protein. Finally, we demonstrate that both a D-box and a GXEN-containing peptides completely block APC-dependent degradation of cyclin B and Xkid, indicating that the GXEN domain might mediate the recognition and association of Xkid with the APC.

  7. Transformative Environmental Education: Stepping Outside the Curriculum Box

    ERIC Educational Resources Information Center

    Johnston, Julie

    2009-01-01

    Environmental education has become trapped in the curriculum box. At a time when our students' generation is becoming trapped in a global warming box, their education needs to be rapidly adaptable to the changing state of their planet. Venturing outside the curriculum box takes courage, creativity, and a willingness to let nature serve as the…

  8. 77 FR 74513 - Folding Gift Boxes From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-14

    ... COMMISSION Folding Gift Boxes From China Determination On the basis of the record \\1\\ developed in the... antidumping duty order on folding gift boxes from China would be likely to lead to continuation or recurrence... Commission are contained in USITC Publication 4365 (November 2012), entitled Folding Gift Boxes from China...

  9. 30 CFR 18.49 - Connection boxes on machines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Connection boxes on machines. 18.49 Section 18... Design Requirements § 18.49 Connection boxes on machines. Connection boxes used to facilitate replacement of cables or machine components shall be explosion-proof. Portable-cable terminals on cable reels...

  10. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Standards for reconstituted wood boxes. 178.515... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.515 Standards for reconstituted wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements...

  11. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Standards for reconstituted wood boxes. 178.515... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.515 Standards for reconstituted wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements...

  12. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Standards for reconstituted wood boxes. 178.515... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.515 Standards for reconstituted wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements...

  13. 46. DETAIL VIEW OF THE MORTAR BOXES, STAMP BATTERIES AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. DETAIL VIEW OF THE MORTAR BOXES, STAMP BATTERIES AND AMALGAMATION TABLES. NOTE FULTON IRON WORKS, SAM FRANCISCO 1908 STAMPED INTO THE MORTAR BOX. ALSO NOTE THE DIES RESTING ON THE OUTSIDE OF THE MORTAR BOX BY THE SECOND STAMP BATTERY FROM THE CAMERA POSITION. - Standard Gold Mill, East of Bodie Creek, Northeast of Bodie, Bodie, Mono County, CA

  14. 46 CFR 113.20-3 - Connection boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Connection boxes. 113.20-3 Section 113.20-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Automatic Sprinkler Systems § 113.20-3 Connection boxes. Each connection box and...

  15. 46 CFR 113.20-3 - Connection boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Connection boxes. 113.20-3 Section 113.20-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Automatic Sprinkler Systems § 113.20-3 Connection boxes. Each connection box and...

  16. 46 CFR 113.20-3 - Connection boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Connection boxes. 113.20-3 Section 113.20-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Automatic Sprinkler Systems § 113.20-3 Connection boxes. Each connection box and...

  17. 46 CFR 113.20-3 - Connection boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Connection boxes. 113.20-3 Section 113.20-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Automatic Sprinkler Systems § 113.20-3 Connection boxes. Each connection box and...

  18. 49 CFR 215.107 - Defective plain bearing box: General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing box: General. 215.107... Suspension System § 215.107 Defective plain bearing box: General. A railroad may not place or continue in service a car, if the car has— (a) A plain bearing box that does not contain visible free oil; (b) A plain...

  19. 49 CFR 178.517 - Standards for plastic boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... plastic box must be closed with a self-adhesive tape having sufficient tensile strength to prevent the box... manufactured from suitable plastic material and be of adequate strength in relation to its capacity and... material of adequate strength and so designed as to prevent the box from unintentionally opening. (7...

  20. 49 CFR 178.517 - Standards for plastic boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... plastic box must be closed with a self-adhesive tape having sufficient tensile strength to prevent the box... manufactured from suitable plastic material and be of adequate strength in relation to its capacity and... material of adequate strength and so designed as to prevent the box from unintentionally opening. (7...

  1. 49 CFR 178.517 - Standards for plastic boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... plastic box must be closed with a self-adhesive tape having sufficient tensile strength to prevent the box... manufactured from suitable plastic material and be of adequate strength in relation to its capacity and... material of adequate strength and so designed as to prevent the box from unintentionally opening. (7...

  2. 49 CFR 178.517 - Standards for plastic boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... plastic box must be closed with a self-adhesive tape having sufficient tensile strength to prevent the box... manufactured from suitable plastic material and be of adequate strength in relation to its capacity and... material of adequate strength and so designed as to prevent the box from unintentionally opening. (7...

  3. 49 CFR 178.517 - Standards for plastic boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... plastic box must be closed with a self-adhesive tape having sufficient tensile strength to prevent the box... manufactured from suitable plastic material and be of adequate strength in relation to its capacity and... material of adequate strength and so designed as to prevent the box from unintentionally opening. (7...

  4. 30 CFR 77.1002 - Box cuts; spoil material placement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Box cuts; spoil material placement. 77.1002 Section 77.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Ground Control § 77.1002 Box cuts; spoil material placement. When box cuts are made...

  5. 30 CFR 77.1002 - Box cuts; spoil material placement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Box cuts; spoil material placement. 77.1002 Section 77.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Ground Control § 77.1002 Box cuts; spoil material placement. When box cuts are made...

  6. 30 CFR 77.1002 - Box cuts; spoil material placement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Box cuts; spoil material placement. 77.1002 Section 77.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Ground Control § 77.1002 Box cuts; spoil material placement. When box cuts are made...

  7. 30 CFR 77.1002 - Box cuts; spoil material placement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Box cuts; spoil material placement. 77.1002 Section 77.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Ground Control § 77.1002 Box cuts; spoil material placement. When box cuts are made...

  8. 30 CFR 77.1002 - Box cuts; spoil material placement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Box cuts; spoil material placement. 77.1002 Section 77.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE... COAL MINES Ground Control § 77.1002 Box cuts; spoil material placement. When box cuts are made...

  9. 49 CFR 230.104 - Driving box shoes and wedges.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Driving box shoes and wedges. 230.104 Section 230.104 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Locomotives and Tenders Running Gear § 230.104 Driving box shoes and wedges. Driving box shoes and...

  10. 49 CFR 230.104 - Driving box shoes and wedges.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Driving box shoes and wedges. 230.104 Section 230.104 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Locomotives and Tenders Running Gear § 230.104 Driving box shoes and wedges. Driving box shoes and...

  11. 49 CFR 230.104 - Driving box shoes and wedges.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Driving box shoes and wedges. 230.104 Section 230.104 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Locomotives and Tenders Running Gear § 230.104 Driving box shoes and wedges. Driving box shoes and...

  12. 77 FR 36585 - Post Office Box Service Enhancements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-19

    ... COMMISSION Post Office Box Service Enhancements AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY... concerning enhanced services for Post Office Box service. It also addresses the status of a related Complaint... enhanced services that it offers to post office box customers at certain retail locations.\\1\\ The...

  13. 30 CFR 57.12007 - Junction box connection procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Junction box connection procedures. 57.12007... Electricity Surface and Underground § 57.12007 Junction box connection procedures. Trailing cable and power-cable connections to junction boxes shall not be made or broken under load....

  14. Using Origami Boxes to Explore Concepts of Geometry and Calculus

    ERIC Educational Resources Information Center

    Wares, Arsalan

    2011-01-01

    The purpose of this classroom note is to provide an example of how a simple origami box can be used to explore important concepts of geometry and calculus. This article describes how an origami box can be folded, then it goes on to describe how its volume and surface area can be calculated. Finally, it describes how the box could be folded to…

  15. Using Origami Boxes to Explore Concepts of Geometry and Calculus

    ERIC Educational Resources Information Center

    Wares, Arsalan

    2011-01-01

    The purpose of this classroom note is to provide an example of how a simple origami box can be used to explore important concepts of geometry and calculus. This article describes how an origami box can be folded, then it goes on to describe how its volume and surface area can be calculated. Finally, it describes how the box could be folded to…

  16. 46 CFR 78.47-10 - Manual alarm boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... alarm boxes shall be clearly and permanently marked “IN CASE OF FIRE BREAK GLASS.” Existing boxes not so... at least 1/2 inch letters “IN CASE OF FIRE BREAK GLASS.” All manual alarm boxes shall be numbered in...

  17. 46 CFR 78.47-10 - Manual alarm boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... alarm boxes shall be clearly and permanently marked “IN CASE OF FIRE BREAK GLASS.” Existing boxes not so... at least 1/2 inch letters “IN CASE OF FIRE BREAK GLASS.” All manual alarm boxes shall be numbered in...

  18. 46 CFR 78.47-10 - Manual alarm boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... alarm boxes shall be clearly and permanently marked “IN CASE OF FIRE BREAK GLASS.” Existing boxes not so... at least 1/2 inch letters “IN CASE OF FIRE BREAK GLASS.” All manual alarm boxes shall be numbered in...

  19. 46 CFR 78.47-10 - Manual alarm boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... alarm boxes shall be clearly and permanently marked “IN CASE OF FIRE BREAK GLASS.” Existing boxes not so... at least 1/2 inch letters “IN CASE OF FIRE BREAK GLASS.” All manual alarm boxes shall be numbered in...

  20. 30 CFR 18.49 - Connection boxes on machines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Connection boxes on machines. 18.49 Section 18... Design Requirements § 18.49 Connection boxes on machines. Connection boxes used to facilitate replacement of cables or machine components shall be explosion-proof. Portable-cable terminals on cable...

  1. 30 CFR 18.49 - Connection boxes on machines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Connection boxes on machines. 18.49 Section 18... Design Requirements § 18.49 Connection boxes on machines. Connection boxes used to facilitate replacement of cables or machine components shall be explosion-proof. Portable-cable terminals on cable...

  2. 49 CFR 178.515 - Standards for reconstituted wood boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Standards for reconstituted wood boxes. 178.515... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.515 Standards for reconstituted wood boxes. (a) The identification code for a reconstituted wood box is 4F. (b) Construction requirements for...

  3. Flutter analysis of composite box beams

    NASA Technical Reports Server (NTRS)

    Hodges, Dewey H.; Greenman, Matthew

    1995-01-01

    The dynamic aeroelastic instability of flutter is an important factor in the design of modern high-speed, flexible aircraft. The current trend is toward the creative use of composites to delay flutter. To obtain an optimum design, we need an accurate as well as efficient model. As a first step towards this goal, flutter analysis is carried out for an unswept composite box beam using a linear structural model and Theodorsen's unsteady aerodynamic theory. Structurally, the wing was modeled as a thin-walled box-beam of rectangular cross section. Theodorsen's theory was used to get 2-D unsteady aerodynamic forces, which were integrated over the span. A free-vibration analysis is carried out. These fundamental modes are used to get the flutter solution using the V-g method. Future work is intended to build on this foundation.

  4. Torsion Test of a Monocoque Box

    NASA Technical Reports Server (NTRS)

    Mcpherson, Albert E; Ramberg, Walter; Levy, Samuel

    1942-01-01

    A monocoque box beam consisting of a 24S-T aluminum-alloy sheet reinforced by four bulkheads and by longitudinal stringers and corner posts was subjected to bending loads as follows: pure bending about the lift axis, cantilever bending about the lift axis, and pure bending about both lift and drag axis. Longitudinal strains were measured for loads up to a load at which permanent set became measurable. The loads were sufficient to produce buckling of the sheet between stringers on the compression side of the box. The only noticeable effect of this buckling was a small increase in extreme-fiber strain on the compression side. The measured strains and measured deflections differed less than 10 percent from those computed from the simple beam theory after taking account of the effective width of the buckled sheet. The effect of the bulkheads on the distribution of stringer strain was negligible.

  5. Magnons in a box: Condensation and Application

    NASA Astrophysics Data System (ADS)

    Fang, Fang; Olf, Ryan; Wu, Shun; Kadau, Holger; Marti, G. Edward; Stamper-Kurn, Dan

    2016-05-01

    Ultracold gases offer us a remarkable window into the quantum world, allowing direct access to a wide range of manybody and condensed matter phenomena at convenient macroscopic length and time scales. However, producing ultracold gases at ever lower entropy, and measuring statistical properties such as temperature in these low entropy regimes, is a persistent challenge. Magnons, gapless spin excitations of spinor Bose Einstein Condensate (BEC), are expected to behave like free particles. We show that magnons can be used to cool BEC in a deep trap and serve as a thermometer to measure temperatures at extremely low entropy-per-particle. Unlike atoms trapped in a harmonic trap, trapped magnons experience a box potential due to near exact cancellation of the trapping potential by the mean-field interaction within the condensate. We observe the quasi-condensation of magnon excitations within this nature-made box.

  6. Compressive Tests of a Monocoque Box

    NASA Technical Reports Server (NTRS)

    Ramberg, Walter; Mcpherson, Albert E; Levy, Sam

    1939-01-01

    A monocoque box specimen of aluminum alloy was subjected to end compression and the strains in the stringers were measured up to loads at which permanent set became noticeable. The stringer strains at low loads agreed closely with those computed from the assumption of uniform stress distribution. Buckling of the 0.026-inch sheet between stringers and of the 0.075-inch shear web took place at stresses in accord with theoretical values. Permanent set became noticeable at a load of 115,200 pounds, corresponding to an average stringer stress of about 16,000 pounds per square inch. The measured average strain above the first buckling load was within 2 percent of the theoretical strain as calculated from the dimensions of the box and effective width formulas due to Marguerre and to Cox.

  7. Beyond the Black Box Approach to Ethics!

    PubMed Central

    Sandman, Lars; Gustavsson, Erik

    2016-01-01

    In the editorial published in this journal, Daniels and colleagues argue that his and Sabin’s accountability for reasonableness (A4R) framework should be used to handle ethical issues in the health technology assessment (HTA)-process, especially concerning fairness. In contrast to this suggestion, it is argued that such an approach risks suffering from the irrrelevance or insufficiency they warn against. This is for a number of reasons: lack of comprehensiveness, lack of guidance for how to assess ethical issues within the "black box" of A4R as to issues covered, competence and legitimate arguments and finally seemingly accepting consensus as the final verdict on ethical issues. We argue that the HTA community is already in a position to move beyond this black box approach PMID:27285520

  8. Solar box-cooker: Part 1-modeling

    SciTech Connect

    Thulasi Das, T.C. ); Karmakar, S. ); Rao, D.P. )

    1994-03-01

    Thermal models for the solar box-cookers loaded with one, two, or four vessels have been presented. The method of Taha and Eldighidy has been utilized to estimate the enhanced solar irradiance on the cooker due to the flat reflector fitted to the cooker. The coupling of the Taha and Eldighidy method with the thermal models yielded the models for the box-cookers. A great many transfer coefficients and view factors are required as the model inputs. The methods for their estimation are given. Analysis of the transfer processes, computer simulation of the cooker, and experimental data on some of the coefficients, which are peculiar to the cooker and not available in the literature are presented in the companion paper.

  9. Are artificial neural networks black boxes?

    PubMed

    Benitez, J M; Castro, J L; Requena, I

    1997-01-01

    Artificial neural networks are efficient computing models which have shown their strengths in solving hard problems in artificial intelligence. They have also been shown to be universal approximators. Notwithstanding, one of the major criticisms is their being black boxes, since no satisfactory explanation of their behavior has been offered. In this paper, we provide such an interpretation of neural networks so that they will no longer be seen as black boxes. This is stated after establishing the equality between a certain class of neural nets and fuzzy rule-based systems. This interpretation is built with fuzzy rules using a new fuzzy logic operator which is defined after introducing the concept of f-duality. In addition, this interpretation offers an automated knowledge acquisition procedure.

  10. The Multiple Mirror Telescope (MMT) top box

    NASA Astrophysics Data System (ADS)

    Blanco, Daniel R.; Janes, Clinton C.; Montgomery, John W.; Ouellette, David B.; Sharp, Frank H.

    1986-01-01

    So named because it resides on top of the focal plane instrument, the MMT top box is a two-level optical bench with many remotely controlled features which can be configured for experimental use of the MMT. It houses the relay optics and television cameras for focusing, coaligning and guiding the six telescopes of the MMT, as well as the integrating sphere, filter wheel, Hartmann mask wheel, and relay optics of the comparison source for instrumental calibration. It also provides a rigid mounting platform for research instruments as well as special fixtures for telescope tests and collimation. In accommodating these tasks the top box incorporates several novel features which may interest designers of other large telescopes.

  11. PCB-Based Break-Out Box

    NASA Technical Reports Server (NTRS)

    Lee, Jason H.

    2011-01-01

    Break-out boxes (BOBs) are necessary for all electrical integration/cable checkouts and troubleshooting. Because the price of a BOB is high, and no work can be done without one, often the procedure stops, simply waiting for a BOB. A less expensive BOB would take less time in the integration, testing, and troubleshooting process. The PCB-based BOB works and looks the same as a standard JPL BOB, called Gold Boxes. The only differences between the old BOB and the new PCB-based BOB is that the new one has 80 percent of its circuitry in a printed circuit board. This process reduces the time for fabrication, thus making the BOBs less expensive. Moreover, because of its unique design, the new BOBs can be easily assembled and fixed. About 80 percent of the new PCB-based BOB is in a $22 (at the time of this reporting) custom-designed, yet commercially available PCB. This device has been used successfully to verify that BOB cables were properly made. Also, upon completion, the BOB was beeped out via a multimeter to ensure that all sockets on the connectors were properly connected to the respective banana jack. When compared to the Gold Box BOBs, the new BOB has many advantages. It is much more cost efficient, it delivers equal usability at substantially lower cost of the BOB, and the Gold Box is much heavier when compared to the new BOB. The new BOB is also a bit longer and much more versatile in that connectors are easily changeable and if a banana jack is broken, it can be replaced instead of throwing away an entire BOB.

  12. Avionics Box Cold Plate Damage Prevention

    NASA Technical Reports Server (NTRS)

    Stambolian, Damon; Larcher, Steven; Henderson, Gena; Tran, Donald

    2011-01-01

    Over the years there have been several occurrences of damage to Space Shuttle Orbiter cold plates during removal and replacement of avionics boxes. Thus a process improvement team was put together to determine ways to prevent these kinds of damage. From this effort there were many solutions including, protective covers, training, and improved operations instructions. The focus of this paper is to explain the cold plate damage problem and the corrective actions for preventing future damage to aerospace avionics cold plate designs.

  13. Avoiding troubles in large gear boxes

    SciTech Connect

    Abou-Haidar, A.N.

    1995-05-08

    This article describes how attention to details such as moisture, contamination, and mechanical loading pays off in troublefree service. Most problems in large gear boxes occur with gears and bearings. Their failure modes and causes should be carefully analyzed to determine the proper corrective action. If gears are selected properly and maintained while in operation, they should last 20 or 30 yr. Gears usually fail because an interruption in operation causes wear and surface fatigue.

  14. Function of B-BOX under shade.

    PubMed

    Crocco, Carlos D; Holm, Magnus; Yanovsky, Marcelo J; Botto, Javier F

    2011-01-01

    Plants are capable of perceiving changes in the light environment and finely adjust their growth and development. Reductions of red to far-red ratio (R:FR) generated by an increase of the plant canopy above the plant are sensed by the phytochrome system triggering the shade-avoidance syndrome (SAS) that includes elongation of vegetative structures, reduction of branching and acceleration of flowering. Albeit the SAS is a strategy of major adaptative significance in plant communities, involving massive changes in gene expression, our knowledge of the SAS signaling network is still fragmented. By a selection and characterization of a T-DNA mutant with a long hypocotyl under shade, we identified BBX21, a protein with two B-box domains involved in the SAS. BBX21 belongs to a small eight member family of B-box containing proteins with both opposite and additive functions in the SAS signaling. BBX21 down-regulates the gene expression of auxin, brassinosteroid and ethylene signaling pathway components under shade. Furthermore BBX21 is a transcription factor that interacts genetically with COP1. We propose a model in which a dynamic balance of positive and negative B-box transcriptional regulators acts as a gas-and-brake mechanism into the COP1 signaling to regulate the expression of SAS.

  15. T-box factors determine cardiac design.

    PubMed

    Hoogaars, W M H; Barnett, P; Moorman, A F M; Christoffels, V M

    2007-03-01

    The heart of higher vertebrates is a structurally complicated multi-chambered pump that contracts synchronously. For its proper function a number of distinct integrated components have to be generated, including force-generating compartments, unidirectional valves, septa and a system in charge of the initiation and coordinated propagation of the depolarizing impulse over the heart. Not surprisingly, a large number of regulating factors are involved in these processes that act in complex and intertwined pathways to regulate the activity of target genes responsible for morphogenesis and function. The finding that mutations in T-box transcription factor-encoding genes in humans lead to congenital heart defects has focused attention on the importance of this family of regulators in heart development. Functional and genetic analyses in a variety of divergent species has demonstrated the critical roles of multiple T-box factor gene family members, including Tbx11, -2, -3, -5, -18 and -20, in the patterning, recruitment, specification, differentiation and growth processes underlying formation and integration of the heart components. Insight into the roles of T-box factors in these processes will enhance our understanding of heart formation and the underlying molecular regulatory pathways.

  16. Prohibiting Headgear for Safety in Amateur Boxing? Opinion of the Canadian Boxing Community: an Online Poll.

    PubMed

    Dickinson, Philip; Rempel, Philip

    In 2013, the Amateur International Boxing Association (AIBA) introduced a rule banning headgear for male-senior open class boxers during competition. The AIBA has defended the rule change as motivated by safety and supported by internal unpublished studies. As a result, in 2018, the AIBA plans to universally prohibit headgear in competition: for all competitors (male and female), all ages and all levels. Within Canada, this ruling has generated controversy in the boxing community, yet there has been no overall measure of opinion. To address this, we instituted a voluntary, anonymous, online open-access poll to allow members of the boxing community to express their stance on headgear use in competition. In total, 636 responses were received. A total of 71.5 % of Canadian respondents believed headgear should be mandatory at all levels. Only 5.8 % agreed that headgear should be prohibited, as planned for 2018. Estimating results on a representative breakdown of boxing membership in Canada, a similar pattern emerged, whereby 68.2 % concurred with mandatory headgear while only 4.95 % supported its prohibition. Parents of boxers were almost unanimously against banning headgear, stating they would change sports as a result. Similarly, only 1.7 % of women believed headgear should be prohibited. The consensus of the Canadian boxing community largely opposes the rule changes that the AIBA has implemented. The results highlight risks posed to the long-term viability of the sport, if significant grassroots safety concerns are disregarded.

  17. Utilization of Boxes for Pesticide Storage in Sri Lanka.

    PubMed

    Pieris, Ravi; Weerasinghe, Manjula; Abeywickrama, Tharaka; Manuweera, Gamini; Eddleston, Michael; Dawson, Andrew; Konradsen, Flemming

    2017-01-01

    Pesticide self-poisoning is now considered one of the two most common methods of suicide worldwide. Encouraging safe storage of pesticides is one particular approach aimed at reducing pesticide self-poisoning. CropLife Sri Lanka (the local association of pesticide manufacturers), with the aid of the Department of Agriculture, distributed lockable in-house pesticide storage boxes free of charge to a farming community in a rural district of Sri Lanka. Padlocks were not provided with the boxes. These storage boxes were distributed to the farmers without prior education. The authors carried out a cross-sectional follow-up survey to assess the usage of boxes at 7 months after distribution. In an inspection of a sample of 239 box recipients' households, 142 households stored pesticides in the provided box at the time of survey. Among them, only 42 (42/142, 29.65%) households had locked the box; the remaining households (100/142, 70.4%) had not locked the box. A simple hand over of in-house pesticide storage boxes without awareness/education results in poor use of boxes. Additionally, providing in-house storage boxes may encourage farmers to store pesticides in and around houses and, if they are not locked, may lead to unplanned adverse effects.

  18. HMGB Binding to DNA: Single and Double Box Motifs

    PubMed Central

    McCauley, Micah J.; Zimmerman, Jeff; Maher, L. James; C.Williams, Mark

    2007-01-01

    High Mobility Group (HMG) proteins are nuclear proteins believed to significantly affect DNA interactions by altering nucleic acid flexibility. HMG group B proteins contain HMG box domains known to bind into the DNA minor groove without sequence specificity, slightly intercalating base pairs and inducing a strong bend in the DNA helix axis. A dual beam optical tweezers is used to extend double–stranded DNA (dsDNA) in the absence and presence of a single box derivative of human HMGB2 [HMGB2(box A)] and a double box derivative of rat HMGB1 [HMGB1(box A+B)]. The single box domain is observed to reduce the persistence length of the double helix, generating sharp DNA bends with an average bend angle of 99 ± 9°, and at very high concentrations also stabilizing dsDNA against denaturation. The double box protein contains two consecutive HMG box domains joined by a flexible tether. This protein also reduces the DNA persistence length, induces an average bending angle of 77 ± 7° and stabilizes dsDNA at significantly lower concentrations. These results suggest that the single and double box proteins increase DNA flexibility and stability, but both effects are achieved at much lower protein concentrations for the double box. In addition, at low concentrations the single box protein can alter DNA flexibility without stabilizing dsDNA, while stabilization at higher concentration is likely achieved through a cooperative binding mode. PMID:17964600

  19. Invariant box[endash]parameterization of neutrino oscillations

    SciTech Connect

    Weiler, T.J. ); Wagner, D. )

    1998-10-01

    The model-independent [open quotes]box[close quotes] parameterization of neutrino oscillations is examined. The invariant boxes are the classical amplitudes of the individual oscillating terms. Being observables, the boxes are independent of the choice of parameterization of the mixing matrix. Emphasis is placed on the relations among the box parameters due to mixing[endash]matrix unitarity, and on the reduction of the number of boxes to the minimum basis set. Using the box algebra, we show that CP-violation may be inferred from measurements of neutrino flavor mixing even when the oscillatory factors have averaged. General analyses of neutrino oscillations among n[ge]3 flavors can readily determine the boxes, which can then be manipulated to yield magnitudes of mixing matrix elements. [copyright] [ital 1998 American Institute of Physics.

  20. Invariant box{endash}parameterization of neutrino oscillations

    SciTech Connect

    Weiler, T.J.; Wagner, D.

    1998-10-01

    The model-independent {open_quotes}box{close_quotes} parameterization of neutrino oscillations is examined. The invariant boxes are the classical amplitudes of the individual oscillating terms. Being observables, the boxes are independent of the choice of parameterization of the mixing matrix. Emphasis is placed on the relations among the box parameters due to mixing{endash}matrix unitarity, and on the reduction of the number of boxes to the minimum basis set. Using the box algebra, we show that CP-violation may be inferred from measurements of neutrino flavor mixing even when the oscillatory factors have averaged. General analyses of neutrino oscillations among n{ge}3 flavors can readily determine the boxes, which can then be manipulated to yield magnitudes of mixing matrix elements. {copyright} {ital 1998 American Institute of Physics.}

  1. Policy statement—Boxing participation by children and adolescents.

    PubMed

    Purcell, Laura; LeBlanc, Claire M A

    2011-09-01

    Thousands of boys and girls younger than 19 years participate in boxing in North America. Although boxing provides benefits for participants, including exercise, self-discipline, and self-confidence, the sport of boxing encourages and rewards deliberate blows to the head and face. Participants in boxing are at risk of head, face, and neck injuries, including chronic and even fatal neurologic injuries. Concussions are one of the most common injuries that occur with boxing. Because of the risk of head and facial injuries, the American Academy of Pediatrics and the Canadian Paediatric Society oppose boxing as a sport for children and adolescents. These organizations recommend that physicians vigorously oppose boxing in youth and encourage patients to participate in alternative sports in which intentional head blows are not central to the sport.

  2. Can the design of glove dispensing boxes influence glove contamination?

    PubMed

    Assadian, O; Leaper, D J; Kramer, A; Ousey, K J

    2016-11-01

    Few studies have explored the microbial contamination of glove boxes in clinical settings. The objective of this observational study was to investigate whether a new glove packaging system in which single gloves are dispensed vertically, cuff end first, has lower levels of contamination on the gloves and on the surface around the box aperture compared with conventional glove boxes. Seven participating sites were provided with vertical glove dispensing systems (modified boxes) and conventional boxes. Before opening glove boxes, the surface around the aperture was sampled microbiologically to establish baseline levels of superficial contamination. Once the glove boxes were opened, the first pair of gloves in each box was sampled for viable bacteria. Thereafter, testing sites were visited on a weekly basis over a period of six weeks and the same microbiological assessments were made. The surface near the aperture of the modified boxes became significantly less contaminated over time compared with the conventional boxes (P<0.001), with an average of 46.7% less contamination around the aperture. Overall, gloves from modified boxes showed significantly less colony-forming unit contamination than gloves from conventional boxes (P<0.001). Comparing all sites over the entire six-week period, gloves from modified boxes had 88.9% less bacterial contamination. This simple improvement to glove box design reduces contamination of unused gloves. Such modifications could decrease the risk of microbial cross-transmission in settings that use gloves. However, such advantages do not substitute for strict hand hygiene compliance and appropriate use of non-sterile, single-use gloves. Copyright © 2016 The Healthcare Infection Society. All rights reserved.

  3. Biochemical characterization of NfsA, the Escherichia coli major nitroreductase exhibiting a high amino acid sequence homology to Frp, a Vibrio harveyi flavin oxidoreductase.

    PubMed Central

    Zenno, S; Koike, H; Kumar, A N; Jayaraman, R; Tanokura, M; Saigo, K

    1996-01-01

    We identified the nfsA gene, encoding the major oxygen-insensitive nitroreductase in Escherichia coli, and determined its position on the E. coli map to be 19 min. We also purified its gene product, NfsA, to homogeneity. It was suggested that NfsA is a nonglobular protein with a molecular weight of 26,799 and is associated tightly with a flavin mononucleotide. Its amino acid sequence is highly similar to that of Frp, a flavin oxidoreductase from Vibrio harveyi (B. Lei, M. Liu, S. Huang, and S.-C. Tu, J. Bacteriol. 176:3552-3558, 1994), an observation supporting the notion that E. coli nitroreductase and luminescent-bacterium flavin reductase families are intimately related in evolution. Although no appreciable sequence similarity was detected between two E. coli nitroreductases, NfsA and NfsB, NfsA exhibited a low level of the flavin reductase activity and a broad electron acceptor specificity similar to those of NfsB. NfsA reduced nitrofurazone by a ping-pong Bi-Bi mechanism possibly to generate a two-electron transfer product. PMID:8755878

  4. 49 CFR 178.512 - Standards for steel or aluminum boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for steel or aluminum boxes. 178.512... aluminum boxes. (a) The following are identification codes for steel or aluminum boxes: (1) 4A for a steel box; and (2) 4B for an aluminum box. (b) Construction requirements for steel or aluminum boxes are as...

  5. 49 CFR 178.512 - Standards for steel, aluminum or other metal boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Standards for steel, aluminum or other metal boxes..., aluminum or other metal boxes. (a) The following are identification codes for steel, aluminum, or other metal boxes: (1) 4A for a steel box; (2) 4B for an aluminum box; and (3) 4N for an other metal box....

  6. Boxing headguard performance in punch machine tests.

    PubMed

    McIntosh, Andrew S; Patton, Declan A

    2015-09-01

    The paper presents a novel laboratory method for assessing boxing headguard impact performance. The method is applied to examine the effects of headguards on head impact dynamics and injury risk. A linear impactor was developed, and a range of impacts was delivered to an instrumented Hybrid III head and neck system both with and without an AIBA (Association Internationale de Boxe Amateur)-approved headguard. Impacts at selected speeds between 4.1 and 8.3 m/s were undertaken. The impactor mass was approximately 4 kg and an interface comprising a semirigid 'fist' with a glove was used. The peak contact forces were in the range 1.9-5.9 kN. Differences in head impact responses between the Top Ten AIBA-approved headguard and bare headform in the lateral and forehead tests were large and/or significant. In the 8.3 m/s fist-glove impacts, the mean peak resultant headform accelerations for bare headform tests was approximately 130 g compared with approximately 85 g in the forehead impacts. In the 6.85 m/s bare headform impacts, mean peak resultant angular head accelerations were in the range of 5200-5600 rad/s(2) and almost halved by the headguard. Linear and angular accelerations in 45° forehead and 60° jaw impacts were reduced by the headguard. The data support the opinion that current AIBA headguards can play an important role in reducing the risk of concussion and superficial injury in boxing competition and training. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  7. Box codes of lengths 48 and 72

    NASA Technical Reports Server (NTRS)

    Solomon, G.; Jin, Y.

    1993-01-01

    A self-dual code length 48, dimension 24, with Hamming distance essentially equal to 12 is constructed here. There are only six code words of weight eight. All the other code words have weights that are multiples of four and have a minimum weight equal to 12. This code may be encoded systematically and arises from a strict binary representation of the (8,4;5) Reed-Solomon (RS) code over GF (64). The code may be considered as six interrelated (8,7;2) codes. The Mattson-Solomon representation of the cyclic decomposition of these codes and their parity sums are used to detect an odd number of errors in any of the six codes. These may then be used in a correction algorithm for hard or soft decision decoding. A (72,36;15) box code was constructed from a (63,35;8) cyclic code. The theoretical justification is presented herein. A second (72,36;15) code is constructed from an inner (63,27;16) Bose Chaudhuri Hocquenghem (BCH) code and expanded to length 72 using box code algorithms for extension. This code was simulated and verified to have a minimum distance of 15 with even weight words congruent to zero modulo four. The decoding for hard and soft decision is still more complex than the first code constructed above. Finally, an (8,4;5) RS code over GF (512) in the binary representation of the (72,36;15) box code gives rise to a (72,36;16*) code with nine words of weight eight, and all the rest have weights greater than or equal to 16.

  8. Litter box preference in domestic cats: covered versus uncovered.

    PubMed

    Grigg, Emma K; Pick, Lindsay; Nibblett, Belle

    2013-04-01

    Feline inappropriate elimination (periuria and/or perichezia) remains a very common behavioral complaint of cat owners. Treatment recommendations often include improving the attractiveness of the litter boxes available to the cat. One frequent recommendation is to avoid covered litter boxes, although this has not previously been tested experimentally. The goal of this study was to assess whether, all else being equal, cats preferentially used uncovered litter boxes over covered litter boxes. Twenty-eight cats were enrolled in the study and offered the choice of a covered or uncovered box. Waste was scooped daily from each box, and the weight of waste in the different box styles was compared and evaluated using paired t-tests and χ(2) analyses. Overall, there was no significant difference between use of the two box styles. Eight individual cats did exhibit a preference (four for covered, four for uncovered), but individual preference results are not evenly distributed, with more cats than expected showing no preference between litter box types. We postulate that, if boxes are kept sufficiently clean (ie, once daily minimum cleaning), most cats will not show a preference for either box type. The observation that a minority of cats in the study exhibited a preference supports the recommendation of providing individual cats with a 'cafeteria' of litter box styles, including a covered box, to determine whether such a preference exists. These findings add to existing literature on the topic of feline inappropriate elimination and provide additional information for clinicians recommending treatment options for cats exhibiting this behavior.

  9. A (72, 36; 15) box code

    NASA Technical Reports Server (NTRS)

    Solomon, G.

    1993-01-01

    A (72,36;15) box code is constructed as a 9 x 8 matrix whose columns add to form an extended BCH-Hamming (8,4;4) code and whose rows sum to odd or even parity. The newly constructed code, due to its matrix form, is easily decodable for all seven-error and many eight-error patterns. The code comes from a slight modification in the parity (eighth) dimension of the Reed-Solomon (8,4;5) code over GF(512). Error correction uses the row sum parity information to detect errors, which then become erasures in a Reed-Solomon correction algorithm.

  10. "Out of the box" professional development

    NASA Astrophysics Data System (ADS)

    2015-04-01

    At a recent AAPT meeting, I was part of a conversation about professional development that focused on conferences. We discussed the current meeting structure used by AAPT and some alternative formats. This discussion added greatly to my own understanding of new ways for teachers to receive their professional development. This conversation also began my friendship with Kelly O'Shea, a physics teacher from New York. She is also a blogger (check her out at https://kellyoshea.wordpress.com) and an innovative educator. Through my relationship with Kelly, I have grown in my own knowledge of two "out of the box" ways teachers are getting their professional development.

  11. CASAS: A Smart Home in a Box

    PubMed Central

    Cook, Diane J.; Crandall, Aaron S.; Thomas, Brian L.; Krishnan, Narayanan C.

    2013-01-01

    While the potential benefits of smart home technology are widely recognized, a lightweight design is needed for the benefits to be realized at a large scale. We introduce the CASAS “smart home in a box”, a lightweight smart home design that is easy to install and provides smart home capabilities out of the box with no customization or training. We discuss types of data analysis that have been performed by the CASAS group and can be pursued in the future by using this approach to designing and implementing smart home technologies. PMID:24415794

  12. Test procedure for boxed waste assay system

    SciTech Connect

    Wachter, J.

    1994-12-07

    This document, prepared by Los Alamos National Laboratory`s NMT-4 group, details the test methodology and requirements for Acceptance/Qualification testing of a Boxed Waste Assay System (BWAS) designed and constructed by Pajarito Scientific Corporation. Testing of the BWAS at the Plutonium Facility (TA55) at Los Alamos National Laboratory will be performed to ascertain system adherence to procurement specification requirements. The test program shall include demonstration of conveyor handling capabilities, gamma ray energy analysis, and imaging passive/active neutron accuracy and sensitivity. Integral to these functions is the system`s embedded operating and data reduction software.

  13. Identification of F-box only protein 7 as a negative regulator of NF-kappaB signalling

    PubMed Central

    Kuiken, Hendrik J; Egan, David A; Laman, Heike; Bernards, Rene; Beijersbergen, Roderick L; Dirac, Annette M

    2012-01-01

    The nuclear factor κB (NF-κB) signalling pathway controls important cellular events such as cell proliferation, differentiation, apoptosis and immune responses. Pathway activation occurs rapidly upon TNFα stimulation and is highly dependent on ubiquitination events. Using cytoplasmic to nuclear translocation of the NF-κB transcription factor family member p65 as a read-out, we screened a synthetic siRNA library targeting enzymes involved in ubiquitin conjugation and de-conjugation for modifiers of regulatory ubiquitination events in NF-κB signalling. We identified F-box protein only 7 (FBXO7), a component of Skp, Cullin, F-box (SCF)-ubiquitin ligase complexes, as a negative regulator of NF-κB signalling. F-box protein only 7 binds to, and mediates ubiquitin conjugation to cIAP1 and TRAF2, resulting in decreased RIP1 ubiquitination and lowered NF-κB signalling activity. PMID:22212761

  14. Teaching Outside the Box: ARL Librarians' Integration of the "One- Box" into Student Instruction

    ERIC Educational Resources Information Center

    Kulp, Christina; McCain, Cheryl; Scrivener, Laurie

    2014-01-01

    This article reports the results of a survey that targeted reference and instruction librarians who work at libraries that are members of the Asso- ciation of Research Libraries (ARL). Respondents were asked to indicate whether or not they teach students to use the one-box tool, and why or why not. Based on the responses of the 352 librarians who…

  15. Historical Thinking inside the Box: Preservice Elementary Teachers Use Journey Boxes to Craft Counter Narratives

    ERIC Educational Resources Information Center

    Alarcon, Jeannette; Holmes, Kathlene; Bybee, Eric

    2015-01-01

    This article details the "journey box" project process enacted by two elementary preservice teacher cohorts. Engaging in activities and projects that promote a sense of investment in not only consuming but producing historical narratives, preservice teachers potentially become interested in sharing this type of learning with their…

  16. Historical Thinking inside the Box: Preservice Elementary Teachers Use Journey Boxes to Craft Counter Narratives

    ERIC Educational Resources Information Center

    Alarcon, Jeannette; Holmes, Kathlene; Bybee, Eric

    2015-01-01

    This article details the "journey box" project process enacted by two elementary preservice teacher cohorts. Engaging in activities and projects that promote a sense of investment in not only consuming but producing historical narratives, preservice teachers potentially become interested in sharing this type of learning with their…

  17. 46 CFR 111.81-1 - Outlet boxes and junction boxes; general.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...; UL 50; UL 514A, UL 514B, and UL 514C; IEC 60092-101; IEC 92-201; IEC 92-306; IEC 60092-352; IEC 92-401; and IEC 60092-502. (e) Each outlet or junction box must be securely attached to its mounting and... NEMA or IEC standard. ...

  18. DEAD-Box RNA Binding Protein DDX5: Not a Black-Box during Reprogramming.

    PubMed

    Nefzger, Christian M; Polo, Jose M

    2017-04-06

    The role of RNA binding proteins (RBPs) during nuclear reprogramming is poorly characterized. In this issue of Cell Stem Cell,Li et al. (2017) show that DEAD-box RBP DDX5 acts as a reprogramming roadblock and give important mechanistic insights into the establishment of pluripotency by characterizing the intricate downstream events.

  19. Research of intelligent bus coin box

    NASA Astrophysics Data System (ADS)

    Xin, Shihao

    2017-03-01

    In the energy-saving emission reduction of the social context, in response to low-carbon travel, buses become the majority of people choose. We have designed this sorting machine for the present situation that the bus company has received a large amount of mixed zero coins and employed a large amount of manpower to sort out and lower the efficiency. Its function is to separate the coins and notes mixed, and the coins sort storage, the display shows the value of the received coins, so that the whole mechanized inventory classification, reduce the cost of clearing up and improve the efficiency of zero cash recycling, use Simple mechanical principles for classification, to be efficient, accurate and practical. Really meet the current city bus companies, commerce and banking and other industries in order to zero notes, zero coins in the actual demand. The size and specification of this machine are designed according to the size of the bus coin box. It is suitable for almost all buses. It can be installed in the coin box directly, real-time sorting and real-time counting. The difficulty of clearing change.

  20. The Ion Wakefield Inside a Glass Box

    NASA Astrophysics Data System (ADS)

    Chen, Mudi; Matthews, Lorin; Hyde, Truell

    2016-10-01

    The formation of an ion wakefield downstream of dust particles in a complex plasma sheath has long been understood to have strong implications on their structure, stability and dynamics . The presence of the ion wake introduces interesting phenomena such as charge reduction on downstream particles and asymmetric interaction forces between upstream and downstream particles. Many of the self-ordered dust particle structures observed in complex plasma experiments are the result of the combination of the ion-wakefield and the external confinement; unfortunately, few experimental measurements isolating the effect of the wakefield have been conducted. In this experiment, 1-D dust particle structures (i.e., vertically aligned particle chains) are formed in a GEC RF reference cell within a glass box sitting on the powered lower electrode. A diode pumped, solid-state laser is used to perturb individual particles within the particle chain, allowing a map of the ion wakefield inside the glass box to be generated. The implications of these results will be discussed. NSF / DOE funding is gratefully acknowledged - PHY1414523 & PHY1262031.

  1. Rings and boxes in dissipative environments

    NASA Astrophysics Data System (ADS)

    Horovitz, Baruch

    2012-02-01

    We study a particle on a ring in presence of a dissipative Caldeira-Leggett environment and derive its response to a DC field [1]. We find, through a 2-loop renormalization group analysis, that a large dissipation parameter η flows to a fixed point R̂=/2π. We also reexamine the mapping of this problem to that of the Coulomb box and show that the relaxation resistance, of recent interest, has a certain average that is quantized for η>R̂, leading to quantized noise. We propose a box experiment to detect this noise. When the particle carries a spin with spin-orbit interactions [2] we find that the spin correlations in the direction perpendicular to the ring are finite at long times, i.e. do not dephase, while the parallel components may decay as a power law at strong dissipation. [4pt] [1] Y. Etzioni, B. Horovitz and P. Le Doussal, Phys. Rev. Lett. 106, 166803 (2011). [0pt] [2] G. Zar'and, G. T. Zim'anyi and F. Wilhelm, Phys. Rev. B62, 8137 (2000).

  2. The Design of the Orthogonal Box Cavity

    SciTech Connect

    Moretti, Alfred; /Fermilab

    2010-09-15

    The muon collider and/or the neutrino factory require large accelerating electric field gradients immersed in large (3 to 6 T) solenoidal magnetic fields for ionization cooling of muon beams. Our original vacuum breakdown study demonstrated a loss of achievable peak accelerating gradient in solenoidal magnetic fields by a factor 2 or greater. The Muon Collaboration has developed a theory of a method to suppress high electric field breakdown in vacuum cavities needed for a Muon collider or neutrino factory. It has been shown in our studies and by others that high gradient electric field emitted electrons (dark current) are the primary cause of breakdown. A DC magnetic field orthogonal to the RF electric accelerating field prevents dark current high field emitted electrons from traveling across the accelerating gap and then will prevent breakdown. We have decided to test this theory by building a special cavity in the shape of vacuum box. Figure 1 is a simplified view of the cavity design. The design is based on an 805 MHz WR975 waveguide cavity resonating in the TE{sub 101} mode. For the TE{sub 101} mode the resonant frequency f{sub 0} is given by the relationship f{sub 0} = c[(I/a){sup 2} + (m/b){sup 2} + (n/d){sup 2}]{sup 0.5}/2 where a and d are the lengths of the base sides and b is the height of the box in MKS units and c is the velocity of light.

  3. Flexible bulb large storage box hydrogen maser

    NASA Technical Reports Server (NTRS)

    Reinhardt, V.

    1973-01-01

    The principal limitation on the accuracy of the hydrogen maser as a primary frequency standard has been the irreproducibility of the frequency shift caused by collisions of the radiating atoms with the walls of the vessel containing them. The flexible bulb-large storage box hydrogen maser allows correction for this wall shift within a single device, sidestepping the reproducibility problem, and reducing the frequency error from the wall shift to the level imposed by the device's stability. The principles of the device are discussed including the flexible bulb technique and the complications caused by a multiple region storage bulb. The stability of the device is discussed including a comparison with an ordinary hydrogen maser. Data is presented from a working flexible bulb-large storage box hydrogen maser demonstrating the feasibility of the device and showing some of its operating characteristics. The flexibility of the device is demonstrated by showing how the device's added degrees of freedom allow measurement of parameters unmeasurable in an ordinary hydrogen maser.

  4. A Group Action Method for Construction of Strong Substitution Box

    NASA Astrophysics Data System (ADS)

    Jamal, Sajjad Shaukat; Shah, Tariq; Attaullah, Atta

    2017-06-01

    In this paper, the method to develop cryptographically strong substitution box is presented which can be used in multimedia security and data hiding techniques. The algorithm of construction depends on the action of a projective general linear group over the set of units of the finite commutative ring. The strength of substitution box and ability to create confusion is assessed with different available analyses. Moreover, the ability of resistance against malicious attacks is also evaluated. The substitution box is examined by bit independent criterion, strict avalanche criterion, nonlinearity test, linear approximation probability test and differential approximation probability test. This substitution box is equated with well-recognized substitution boxes such as AES, Gray, APA, S8, prime of residue, Xyi and Skipjack. The comparison shows encouraging results about the strength of the proposed box. The majority logic criterion is also calculated to analyze the strength and its practical implementation.

  5. [Design and application of hand-wrist caring moxibustion box].

    PubMed

    Gao, Xi-Yan; Wang, Xin; Xu, Cui-Xiang; Gao, Ling; Ma, Qiao-Lin

    2013-11-01

    A hand-wrist moxibustion box is designed to effectively solve difficulty to have moxibustion at handwrist joint and problem of bad moxibustion effect as well as improve heat efficiency of moxibustion. The device is consisted of a box and protective screening. The box is hollow with opening on top and bottom. A reversible cover is fixed on the top of the box and support frames are put in the inner-middle. On the side wall there is a hole that is at the same horizontal level of support frames, and horizontal protective screening is put on the bottom. The design of this moxibustion box is novel and unique, simple and reasonable, which could give moxibustion on hand and wrist at the same time. Also it is easily made with low cost, easy to use and favorable effect. It is an innovation on moxibustion box.

  6. Evolving S Boxes with Reduced Differential Power Analysis Susceptibiltiy

    DTIC Science & Technology

    2016-12-02

    points in S-boxes; repairing a fixed point after evolution in a way that preserves fitness was superior to including a fixed point penalty in the...objective function or randomly repairing fixed points during or after evolution . Keywords: S-box · nonlinearity · transparency order · genetic algorithm... evolution . Previous genetic algorithms work neglects to constrain search to S-boxes that lack fixed points. 1.3 Organization We structure the paper as follows

  7. CDL description of the CDC 6600 stunt box

    NASA Technical Reports Server (NTRS)

    Hertzog, J. B.

    1971-01-01

    The CDC 6600 central memory control (stunt box) is described utilizing CDL (Computer Design Language), block diagrams, and text. The stunt box is a clearing house for all central memory references from the 6600 central and peripheral processors. Since memory requests can be issued simultaneously, the stunt box must be capable of assigning priorities to requests, of labeling requests so that the data will be distributed correctly, and of remembering rejected addresses due to memory conflicts.

  8. Small molecule therapeutics targeting F-box proteins in cancer.

    PubMed

    Liu, Yuan; Mallampalli, Rama K

    2016-02-01

    The ubiquitin proteasome system (UPS) plays vital roles in maintaining protein equilibrium mainly through proteolytic degradation of targeted substrates. The archetypical SCF ubiquitin E3 ligase complex contains a substrate recognition subunit F-box protein that recruits substrates to the catalytic ligase core for its polyubiquitylation and subsequent proteasomal degradation. Several well-characterized F-box proteins have been demonstrated that are tightly linked to neoplasia. There is mounting information characterizing F-box protein-substrate interactions with the rationale to develop unique therapeutics for cancer treatment. Here we review that how F-box proteins function in cancer and summarize potential small molecule inhibitors for cancer therapy.

  9. An Improved Method of Manufacturing Corrugated Boxes: Lateral Corrugator

    SciTech Connect

    Frank C. Murray Ph.D.; , Roman Popil Ph.D.; Michael Shaepe

    2008-12-18

    Paper physicists have known that a corrugated box constructed from outer liner sheets having a predominant fiber orientation aligned with the corrugating flute direction would have higher stiffness and crush resistance (per unit of fiber weight) than the conventional box construction. Such increased performance per unit of fiber weight could result in fiber reduction and energy savings for boxes having equivalent performance specifications. The goal of this project was to develop and demonstrate a commercially viable lateral corrugating process. This included designing and building a pilot lateral corrugator, testing and evaluating pilot machine made boxes, and developing a strategy for commercialization.

  10. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing...

  11. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing...

  12. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing...

  13. Determination of mechanical characteristics of stuffing box packings

    NASA Astrophysics Data System (ADS)

    Zahorulko, A.; Kundera, C.; Hudkov, S.

    2017-08-01

    The resource of stuffing box seal is determined not only by the unit design and by the conditions of its operation, but also essentially depends on the correct choice of stuffing box packing. Not one of stuffing box packing manufacturers does not provide data on mechanical properties. Therefore, in this paper the results of experimental investigations on determining the mechanical properties of packings are presented. The obtaining mechanical characteristics allow to clarify existing methods of calculation and to increase sealing and durability of stuffing box packing seals.

  14. Northwest side, northeast part, looking southeast, note fire alarm box ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Northwest side, northeast part, looking southeast, note fire alarm box at right - Mare Island Naval Shipyard, Guard House & Barracks, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  15. Small molecule therapeutics targeting F-Box proteins in cancer

    PubMed Central

    Liu, Yuan; Mallampalli, Rama K.

    2015-01-01

    The ubiquitin proteasome system (UPS) plays vital roles in maintaining protein equilibrium mainly through proteolytic degradation of targeted substrates. The archetypical SCF ubiquitin E3 ligase complex contains a substrate recognition subunit F-box protein that recruits substrates to the catalytic ligase core for its polyubiquitylation and subsequent proteasomal degradation. Several well characterized F-box proteins have been demonstrated that are tightly linked to neoplasia. There is mounting information characterizing F-box protein-substrate interactions with the rationale to develop unique therapeutics for cancer treatment. Here we review that how F-box proteins function in cancer and summarize potential small molecule inhibitors for cancer therapy. PMID:26427329

  16. Ion-wake field inside a glass box

    NASA Astrophysics Data System (ADS)

    Chen, Mudi; Dropmann, Michael; Zhang, Bo; Matthews, Lorin S.; Hyde, Truell W.

    2016-09-01

    The confinement provided by a glass box is proving ideal for the formation of vertically aligned structures and a convenient method for controlling the number of dust particles comprising these dust structures as well as their sizes and shapes. In this paper, the electronic confinement of the glass box is mapped, and the particle interactions between the particle pairs inside the glass box are measured. The ion-wake field is shown to exist within the glass box, and its vertical and horizontal extents are measured.

  17. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing...

  18. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing...

  19. Single-step purification of recombinant proteins using elastin-like peptide-mediated inverse transition cycling and self-processing module from Neisseria meningitides FrpC.

    PubMed

    Liu, Wen-Jun; Wu, Qian; Xu, Bi; Zhang, Xin-Yu; Xia, Xiao-Li; Sun, Huai-Chang

    2014-06-01

    Purification of recombinant proteins is a major task and challenge in biotechnology and medicine. In this paper we report a novel single-step recombinant protein purification system which was based on elastin-like peptide (ELP)-mediated reversible phase transition and FrpC self-processing module (SPM)-mediated cleavage. After construction of a SPM-ELP fusion expression vector, we cloned the coding sequence for green fluorescent protein (GFP), the Fc portion of porcine IgG (pFc) or human β defensin 3 (HBD3) into the vector, transformed the construct into Escherichia coli, and induced the fusion protein expression with IPTG. The target-SPM-ELP fusion proteins GFP-SPM-ELP, Fc-SPM-ELP and HBD3-SPM-ELP were expressed in a soluble form and efficiently purified from the clarified cell extracts by two rounds of inverse transition cycling (ITC). Under the optimized conditions, the SPM-mediated cleavage efficiencies for the three fusion proteins ranged from 92% to 93%. After an additional round of ITC, the target proteins GFP, pFc and HBD3 were recovered with purities ranging from 90% to 100% and yields ranging from 1.1 to 36mg/L in shake flasks. The endotoxin levels in all of the three target proteins were <0.03EU/mg. The three target proteins were functionally active with the expected molecular weights. These experimental results confirmed the high specificity and efficiency of SPM-mediated cleavage, and suggested the applicability of SPM-ELP fusion system for purification of recombinant proteins.

  20. Thermohaline circulation and its box models simulation

    NASA Astrophysics Data System (ADS)

    Bazyura, Kateryna; Polonsky, Alexander; Sannikov, Viktor

    2014-05-01

    Ocean Thermochaline circulation (THC) is the part of large-scale World Ocean circulation and one of the main climate system components. It is generated by global meridional density gradients, which are controlled by surface heat and freshwater fluxes. THC regulates climate variability on different timescales (from decades to thousands years) [Stocker (2000), Clark (2002)]. Study of paleoclimatic evidences of abrupt and dramatic changes in ocean-atmosphere system in the past (such as, Dansgaard-Oeschger and Heinrich events or Younger Dryas, see e.g., [Rahmstorf (2002), Alley & Clark(1999)]) shows that these events are connected with THC regimes. At different times during last 120,000 years, three THC modes have prevailed in the Atlantic. They can be labeled as stadial, interstadial and Heinrich modes or as cold, warm and off mode. THC collapse (or thermohaline catastrophe) can be one of the consequences of global warming (including modern anthropogenic climate changes occurring at the moment). The ideas underlying different box-model studies, possibility of thermochaline catastrophe in present and past are discussed in this presentation. Response of generalized four box model of North Atlantic thermohaline circulation [developing the model of Griffies & Tzippermann (1995)] on periodic, stochastic and linear forcing is studied in details. To estimate climatic parameters of the box model we used monthly salinity and temperature data of ECMWF operational Ocean Reanalysis System 3 (ORA-S3) and data from atmospheric NCEP/NCAR reanalysis on precipitation, and heat fluxes for 1959-2011. Mean values, amplitude of seasonal cycle, amplitudes and periods of typical interdecadal oscillations, white noise level, linear trend coefficients and their significance level were estimated for every hydrophysical parameter. In response to intense freshwater or heat forcing, THC regime can change resulting in thermohaline catastrophe. We analyze relevant thresholds of external forcing in

  1. Technology integration box beam failure study

    NASA Technical Reports Server (NTRS)

    Shuart, Mark J.; Ambur, D. R.; Davis, D. D., Jr.; Davis, Randall C.; Farley, G. L.; Lotts, C. G.; Wang, J. T.

    1992-01-01

    Composite structures have the potential to be cost effective, structurally efficient primary aircraft structures. As part of the Advanced Composite Technology (ACT) program to exploit this potential for heavily loaded aircraft structures, the design and fabrication of the technology integration box beam (TIBB) was completed. The TIBB is an advanced composite prototype structure for the center wing section of the Lockheed C-130 aircraft. The TIBB was tested for downbending, upbending, torsion, and combined upbending and torsion load conditions to verify the design. The TIBB failed at 83 percent of design ultimate load for the combined upbending and torsion load condition. Current analytical and experimental results are described for a study of the mechanisms that led to the failure of the TIBB. Experimental results include load, strain, and deflection data. An analytical study was conducted of the TIBB structural response. Analytical results include strain and deflection results from a global analysis of the TIBB.

  2. Breakthrough thinking from inside the box.

    PubMed

    Coyne, Kevin P; Clifford, Patricia Gorman; Dye, Renée

    2007-12-01

    Companies often begin their search for great ideas either by encouraging wild, outside-the-box thinking or by conducting quantitative analysis of existing market and financial data and customer opinions. Those approaches can produce middling ideas at best, say Coyne, founder of an executive-counseling firm in Atlanta, and Clifford and Dye, strategy experts at McKinsey. The problem with the first method is that few people are very good at unstructured, abstract brainstorming. The problems with the second are that databases are usually compiled to describe current--not future--offerings, and customers rarely can tell you whether they need or want a product if they've never seen it. The secret to getting your organization to regularly generate lots of good ideas, and occasionally some great ones, is deceptively simple: First, create new boxes for people to think within so that they don't get lost in the cosmos and they have a basis for offering ideas and knowing whether they're making progress in the brainstorming session. Second, redesign ideation processes to remove obstacles that interfere with the flow of ideas--such as most people's aversion to speaking in groups larger than ten. This article offers a tested approach that poses concrete questions. For example, what do Rollerblades, Häagen-Dazs ice cream, and Spider-Man movies have in common? The answer: Each is something that adults loved as children and that was reproduced in an expensive form for grown-ups. Asking brainstorming participants to ponder how their childhood passions could be recast as adult offerings might generate some fabulous ideas for new products or services.

  3. Nondestructive boxed transuranic (TRU) waste assay systems

    NASA Astrophysics Data System (ADS)

    Caldwell, John T.; Jones, Stephanie A.; Lucero, Randy F.

    1999-01-01

    A brief history of boxed waste assay systems (primarily those developed at Los Alamos National Laboratory) is presented. The characteristics and design process involved with current generation systems--as practiced by BII--are also discussed in some detail. Finally, a specific boxed waste assay system and acceptance test results are presented. This system was developed by BII and installed at the Waste Receiving and Packaging (WRAP) facility in Hanford, Washington in early 1997. The WRAP system combines imaging passive/active neutron (IPAN) techniques with gamma- ray energy analysis (GEA) to assay crates up to 2.5 m X 2.5 m X 6.5 m in size. (Systems that incorporate both these methodologies are usually denoted IPAN/GEA types.) Two separate gamma-ray measurements are accomplished utilizing 16 arrayed NaI detectors and a moveable HPGe detector, while 3He detectors acquire both active and passive neutron data. These neutron measurements use BII's proprietary imaging methodology. Acceptance testing of the system was conducted at Hanford in January 1998. The system's operating performance was evaluated based on accuracy and sensitivity requirements for three different matrix types. Test results indicate an average 13% active mode accuracy for 10 nCi/g loadings of Pu waste and 5% passive mode accuracy for 10 g loadings of Pu waste. Sensitivity testing demonstrated an active mode lower limit of detection of less than 5 nCi/g of 239Pu for the medium matrix and less than 20 pCi/g of fission and activation products at 3(sigma) above background.

  4. Chironex fleckeri (Box Jellyfish) Venom Proteins

    PubMed Central

    Brinkman, Diane L.; Konstantakopoulos, Nicki; McInerney, Bernie V.; Mulvenna, Jason; Seymour, Jamie E.; Isbister, Geoffrey K.; Hodgson, Wayne C.

    2014-01-01

    The box jellyfish Chironex fleckeri produces extremely potent and rapid-acting venom that is harmful to humans and lethal to prey. Here, we describe the characterization of two C. fleckeri venom proteins, CfTX-A (∼40 kDa) and CfTX-B (∼42 kDa), which were isolated from C. fleckeri venom using size exclusion chromatography and cation exchange chromatography. Full-length cDNA sequences encoding CfTX-A and -B and a third putative toxin, CfTX-Bt, were subsequently retrieved from a C. fleckeri tentacle cDNA library. Bioinformatic analyses revealed that the new toxins belong to a small family of potent cnidarian pore-forming toxins that includes two other C. fleckeri toxins, CfTX-1 and CfTX-2. Phylogenetic inferences from amino acid sequences of the toxin family grouped CfTX-A, -B, and -Bt in a separate clade from CfTX-1 and -2, suggesting that the C. fleckeri toxins have diversified structurally and functionally during evolution. Comparative bioactivity assays revealed that CfTX-1/2 (25 μg kg−1) caused profound effects on the cardiovascular system of anesthetized rats, whereas CfTX-A/B elicited only minor effects at the same dose. Conversely, the hemolytic activity of CfTX-A/B (HU50 = 5 ng ml−1) was at least 30 times greater than that of CfTX-1/2. Structural homology between the cubozoan toxins and insecticidal three-domain Cry toxins (δ-endotoxins) suggests that the toxins have a similar pore-forming mechanism of action involving α-helices of the N-terminal domain, whereas structural diversification among toxin members may modulate target specificity. Expansion of the cnidarian toxin family therefore provides new insights into the evolutionary diversification of box jellyfish toxins from a structural and functional perspective. PMID:24403082

  5. Choosing a future for epidemiology: II. From black box to Chinese boxes and eco-epidemiology.

    PubMed Central

    Susser, M; Susser, E

    1996-01-01

    Part I of this paper traced the evolution of modern epidemiology in terms of three eras, each with its dominant paradigm, culminating in the present era of chronic disease epidemiology with its paradigm, the black box. This paper sees the close of the present era and foresees a new era of eco-epidemiology in which the deployment of a different paradigm will be crucial. Here a paradigm is advocated for the emergent era. Encompassing many levels of organization--molecular and societal as well as individual--this paradigm, termed Chinese boxes, aims to integrate more than a single level in design, analysis, and interpretation. Such a paradigm could sustain and refine a public health-oriented epidemiology. But preventing a decline of creative epidemiology in this new era will require more than a cogent scientific paradigm. Attention will have to be paid to the social processes that foster a cohesive and humane discipline. PMID:8629718

  6. A Comparison of Energy Expenditure During "Wii Boxing" Versus Heavy Bag Boxing in Young Adults.

    PubMed

    Perusek, Kristen; Sparks, Kenneth; Little, Kathleen; Motley, Mary; Patterson, Sheila; Wieand, Jennifer

    2014-02-01

    Traditional computer videogames are sedentary, whereas new computer videogames, such as the Nintendo(®) (Redmond, WA) "Wii™ Sports" games, allow users to physically interact while playing the sport. Energy expenditure (EE), heart rate (HR), and rating of perceived exertion (RPE) during heavy bag boxing versus the Nintendo "Wii Boxing" game were compared. Fifteen males and 14 females (mean age, 25.6 years; height, 171.3 cm; weight, 71.8 kg) randomly selected (by a coin toss) heavy bag boxing or "Wii Boxing" for their first test session and completed the other protocol at their second session at least 2 days later. Each session lasted for a total duration of 30 minutes and consisted of 10 3-minute exercise bouts with measurements of HR, RPE, and EE obtained from indirect calorimetry. A paired-samples t test was used to analyze the results. Significant differences were found for HR (bag, 156 beats per minute; Wii, 138 beats per minute; P=0.001) and RPE (bag, 13.8; Wii, 11.4; P=0.0001) but not for EE (bag, 8.0 kcal/minute; Wii, 7.1 kcal/minute; bag, 241 total kcal; Wii, 213 total kcal; P=0.078). The results suggest that computer active videogames, such as the Nintendo Wii, have the potential to provide similar EE as their traditional forms of exercise and may be a sufficient replacement for traditional target HR zone activities, especially in less fit individuals. Further research is needed to compare EE for different "Wii Sports" games with those for their traditional forms of exercise.

  7. Wooden Box Pallet MIL-STD-1660 Tests.

    DTIC Science & Technology

    1992-12-01

    Division (SMCAC-DES), to test a wooden box pallet. This report contains the procedures, results, and recommendations from the MIL- STD -1660 tests...conducted. As tested, the wooden box pallet passed MIL- STD -1660, Design Criteria for Ammunition Unit Loads, tests.

  8. 21 CFR 864.9185 - Blood grouping view box.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Blood grouping view box. 864.9185 Section 864.9185...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Products Used In Establishments That Manufacture Blood and Blood Products § 864.9185 Blood grouping view box. (a) Identification. A blood grouping view...

  9. 21 CFR 864.9185 - Blood grouping view box.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Blood grouping view box. 864.9185 Section 864.9185...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Products Used In Establishments That Manufacture Blood and Blood Products § 864.9185 Blood grouping view box. (a) Identification. A blood grouping view...

  10. 21 CFR 864.9185 - Blood grouping view box.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Blood grouping view box. 864.9185 Section 864.9185...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Products Used In Establishments That Manufacture Blood and Blood Products § 864.9185 Blood grouping view box. (a) Identification. A blood grouping view...

  11. 21 CFR 864.9185 - Blood grouping view box.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Blood grouping view box. 864.9185 Section 864.9185...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Products Used In Establishments That Manufacture Blood and Blood Products § 864.9185 Blood grouping view box. (a) Identification. A blood grouping view...

  12. 9. VIEW, LOOKING WEST, OF GLOVE BOXES ASSOCIATED WITH THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW, LOOKING WEST, OF GLOVE BOXES ASSOCIATED WITH THE ANION EXCHANGE PROCESS IN ROOM 149. THE GLOVE BOXES ON THE LEFT CONTAIN MIXER STIRRERS THAT AID IN THE DISSOLUTION PROCESS THAT OCCURRED PRIOR TO ANION EXCHANGE. (6/20/60) - Rocky Flats Plant, Plutonium Recovery & Fabrication Facility, North-central section of plant, Golden, Jefferson County, CO

  13. Finite element corroboration of buckling phenomena observed in corrugated boxes

    Treesearch

    Thomas J. Urbanik; Edmond P. Saliklis

    2003-01-01

    Conventional compression strength formulas for corrugated fiberboard boxes are limited to geometry and material that produce an elastic postbuckling failure. Inelastic postbuckling can occur in squatty boxes and trays, but a mechanistic rationale for unifying observed strength data is lacking. This study combines a finite element model with a parametric design of the...

  14. Using Willie's Acid-Base Box for Blood Gas Analysis

    ERIC Educational Resources Information Center

    Dietz, John R.

    2011-01-01

    In this article, the author describes a method developed by Dr. William T. Lipscomb for teaching blood gas analysis of acid-base status and provides three examples using Willie's acid-base box. Willie's acid-base box is constructed using three of the parameters of standard arterial blood gas analysis: (1) pH; (2) bicarbonate; and (3) CO[subscript…

  15. 32. LARGE LADLE, BOX FLOOR, GREY IRON FOUNDRY IS USED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. LARGE LADLE, BOX FLOOR, GREY IRON FOUNDRY IS USED TO CARRY LARGE BATCHES OF IRON FROM THE CUPOLA AREAS TO THE LARGE MOLDS MADE ON BOX FLOOR AREA. - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  16. 24. VIEW OF BOXES CONTAINING SOLENOIDS AND HYDRAULIC PUMP CONTRACTORS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. VIEW OF BOXES CONTAINING SOLENOIDS AND HYDRAULIC PUMP CONTRACTORS FOR ENVIRONMENTAL DOORS AND BREAKERS FOR RECEPTACLES ON SEVERAL STATIONS. BOXES LOCATED IN THE SOUTHEAST CORNER OF SLC-3W MST STATION 63. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  17. Detection of Gas Leaks in an Anaerobic Glove Box

    PubMed Central

    Jones, Gilda L.; Dever, Stanley M.

    1974-01-01

    An inert gas, Freon, can be added to the atmosphere of an anaerobic glove box without deleterious effect to cultures of anaerobic microorganisms. The sensitive probe of a Halogen Leak Detector passing over the outside surface of the box will pinpoint any escaping Freon and therefore locate the leak. PMID:4596756

  18. Detection of gas leaks in an anaerobic glove box.

    PubMed

    Jones, G L; Dever, S M

    1974-04-01

    An inert gas, Freon, can be added to the atmosphere of an anaerobic glove box without deleterious effect to cultures of anaerobic microorganisms. The sensitive probe of a Halogen Leak Detector passing over the outside surface of the box will pinpoint any escaping Freon and therefore locate the leak.

  19. Natural Interaction Based Online Military Boxing Learning System

    ERIC Educational Resources Information Center

    Yang, Chenglei; Wang, Lu; Sun, Bing; Yin, Xu; Wang, Xiaoting; Liu, Li; Lu, Lin

    2013-01-01

    Military boxing, a kind of Chinese martial arts, is widespread and health beneficial. In this paper, the authors introduce a military boxing learning system realized by 3D motion capture, Web3D and 3D interactive technologies. The interactions with the system are natural and intuitive. Users can observe and learn the details of each action of the…

  20. 46 CFR 113.10-7 - Connection boxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Connection boxes. 113.10-7 Section 113.10-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING COMMUNICATION AND ALARM SYSTEMS AND EQUIPMENT Fire and Smoke Detecting and Alarm Systems § 113.10-7 Connection boxes. Each...