Science.gov

Sample records for 8-10 meter class

  1. Fabrication of 4-meter class astronomical optics

    NASA Astrophysics Data System (ADS)

    Valente, M. J.; Kim, D. W.; Oh, C. J.; Novak, M. J.; Burge, J. H.

    2010-07-01

    The 8-meter mirror production capacity at the University of Arizona is well known. As the Arizona Stadium facility is occupied with giant mirrors, we have developed capability for grinding, polishing, and testing 4-m mirrors in the large optics shop in the College of Optical Sciences. Several outstanding capabilities for optics up to 4.3 meters in diameter are in place: A 4.3-m computer controlled grinding and polishing machine allows efficient figuring of steeply aspheric and nonaxisymmetric surfaces. Interferometry (IR and visible wavelengths) and surface profilometry making novel use of a laser tracker allows quick, accurate in-process measurements from a movable platform on a 30-m vertical tower. A 2-meter class flat measured with a 1-m vibration insensitive Fizeau interferometer and scanning pentaprism system; stitching of 1-m sub-apertures provides complete surface data with the technology ready for extension to the 4 m level. These methods were proven successful by completion of several optics including the 4.3-m Discovery Channel Telescope primary mirror. The 10 cm thick ULE substrate was ground and polished to 16 nm rms accuracy, corresponding to 80% encircled energy in 0.073 arc-second, after removing low order bending modes. The successful completion of the DCT mirror demonstrates the engineering and performance of the support system, ability to finish large aspheric surfaces using computer controlled polishing, and accuracy verification of surface measurements. In addition to the DCT mirror, a 2-meter class flat was produced to an unprecedented accuracy of <10 nm-rms, demonstrating the combined 1-m Fizeau interferometer and scanning pentaprism measurement techniques.

  2. The NASA Meter Class Autonomous Telescope: Ascension Island

    NASA Technical Reports Server (NTRS)

    Lederer, S. M.; Stansbery, E. G.; Cowardin, H. M.; Hickson, P.; Pace, L. F.; Abercromby, K. J.; Kervin, P. W.

    2013-01-01

    The Meter Class Autonomous Telescope (MCAT) is the newest optical sensor dedicated to NASA's mission to characterize the space debris environment. It is the successor to a series of optical telescopes developed and operated by the JSC Orbital Debris Program Office (ODPO) to monitor and assess the debris environment in (1) Low Earth Orbit (LEO), (2) Medium Earth Orbit (MEO), and (3) Geosynchronous Orbit (GEO), with emphasis on LEO and GEO altitudes. A joint NASA - Air Force Research Labs project, MCAT is a 1.3m optical telescope dedicated to debris research. Its optical path and sensor yield a large survey fence at the cutting edge of current detector performance. It has four primary operational observing modes, two of which were not computationally feasible a decade ago. Operations are supported by a sophisticated software suite that monitors clouds and weather conditions, and controls everything from data collection to dome rotation to processing tens of gigabytes of image data nightly. With fainter detection limits, precision detection, acquisition and tracking of targets, multi-color photometry, precision astrometry, automated re-acquisition capability, and the ability to process all data at the acquisition rate, MCAT is capable of producing and processing a volume and quality of data far in excess of any current (or prior) ODPO operations. This means higher fidelity population inputs and eliminating the multi-year backlog from acquisition-to-product typical of optical campaigns. All of this is possible given a suitable observing location. Ascension Island offers numerous advantages. As a British overseas territory with a US Air Force base presence, the necessary infrastructure and support already exists. It is located mid-way between Brazil and Africa at 7.93S latitude and 14.37 W longitude. With the Ground-based Electro-Optical Deep Space Surveillance (GEODSS) asset in Moron, Spain shutting down, this presents access to the sky from a unique latitude

  3. The NASA/AFRL Meter Class Autonomous Telescope

    NASA Technical Reports Server (NTRS)

    Cowardin, H.; Lederer, S.; Buckalew, B.; Frith, J.; Hickson, P.; Glesne, T.; Anz-Meador, P.; Barker, E.; Stansbery, G.; Kervin, P.

    2016-01-01

    For the past decade, the NASA Orbital Debris Program Office (ODPO) has relied on using various ground-based telescopes in Chile to acquire statistical survey data as well as photometric and spectroscopic data of orbital debris in geosynchronous Earth orbit (GEO). The statistical survey data have been used to supply the Orbital Debris Engineering Model (ORDEM) v.3.0 with debris detections in GEO to better model the environment at altitudes where radar detections are limited. The data produced for the statistical survey ranged from 30 to 40 nights per year, which only accounted for 10% of the possible observing time. Data collection was restricted by ODPO resources and weather conditions. In order to improve the statistical sampling in GEO, as well as observe and sample other orbits, NASA's ODPO with support from the Air Force Research Laboratory (AFRL), has constructed a new observatory dedicated to orbital debris - the Meter Class Autonomous Telescope (MCAT) on Ascension Island. This location provides MCAT with the unique ability to access targets orbiting at an altitude of less than 1,000 km and low inclinations (< 20 deg). This orbital regime currently has little to no coverage by the U.S. Space Surveillance Network. Unlike previous ODPO optical assets, the ability to operate autonomously will allow rapid response observations of break-up events, an observing mode that was only available via radar tasking prior to MCAT's deployment. The primary goal of MCAT is to statistically characterize GEO via daily tasking files uploaded from ODPO. These tasking files define which operating mode to follow, providing the field center, rates, and/or targets to observe over the entire observing period. The system is also capable of tracking fast-moving targets in low Earth orbit (LEO), middle Earth orbit (MEO), as well as highly eccentric orbits like geostationary transfer orbits. On 25 August 2015, MCAT successfully acquired scientific first light, imaging the Bug Nebula and

  4. The NASA Meter Class Autonomous Telescope: Ascension Island

    NASA Technical Reports Server (NTRS)

    Lederer, S. M.; Stansbery, E. G.; Cowardin, H. M.; Kervin, P.; Hickson, P.

    2013-01-01

    The Meter Class Autonomous Telescope (MCAT) is the newest optical sensor dedicated to NASA s mission to characterize the space debris environment. It is the successor to a series of optical telescopes developed and operated by the JSC Orbital Debris Program Office (ODPO) to monitor and assess the debris environment in (1) Low Earth Orbit (LEO), (2) Medium Earth Orbit (MEO), and (3) Geosynchronous Orbit (GEO), with emphasis on LEO and GEO altitudes. A joint NASA-Air Force Research Labs project, MCAT is a 1.3m optical telescope dedicated to debris research. Its optical path and sensor yield a large survey fence at the cutting edge of current detector performance. It has four primary operational observing modes, two of which were not computationally feasible a decade ago. Operations are supported by a sophisticated software suite that monitors clouds and weather conditions, and controls everything from data collection to dome rotation to processing tens of GB of imagery data nightly. With fainter detection limits, precision detection, acquisition and tracking of targets, multi-color photometry, precision astrometry, automated reacquisition capability, and the ability to process all data at the acquisition rate, MCAT is capable of producing and processing a volume and quality of data far in excess of any current (or prior) ODPO operations. This means higher fidelity population inputs and eliminating the multi-year backlog from acquisition-to-product typical of optical campaigns. All of this is possible given a suitable observing location. Originally planned for the island of Legan, part of the Kwajalein Atoll Islands, recent developments have led to a change in venue. Specifically, the Ground-based Electro-Optical Deep Space Surveillance, or GEODSS, System of telescopes is the United States major tracking system for deep space. This network consists of telescopes in Maui, Hawaii; Diego Garcia (Indian Ocean), and Socorro, New Mexico. A fourth optical telescope, though

  5. The NASA Meter Class Autonomous Telescope: Ascension Island

    NASA Astrophysics Data System (ADS)

    Lederer, S.; Stansbery, E. G.; Cowardin, H. M.; Kervin, P.; Hickson, P.

    2013-09-01

    The Meter Class Autonomous Telescope (MCAT) is the newest optical sensor dedicated to NASA's mission to characterize the space debris environment. It is the successor to a series of optical telescopes developed and operated by the JSC Orbital Debris Program Office (ODPO) to monitor and assess the debris environment in (1) Low Earth Orbit (LEO), (2) Medium Earth Orbit (MEO), and (3) Geosynchronous Orbit (GEO), with emphasis on LEO and GEO altitudes. A joint NASA-Air Force Research Labs project, MCAT is a 1.3m optical telescope dedicated to debris research. Its optical path and sensor yield a large survey fence at the cutting edge of current detector performance. It has four primary operational observing modes, two of which were not computationally feasible a decade ago. Operations are supported by a sophisticated software suite that monitors clouds and weather conditions, and controls everything from data collection to dome rotation to processing tens of GB of imagery data nightly. With fainter detection limits, precision detection, acquisition and tracking of targets, multi-color photometry, precision astrometry, automated re-acquisition capability, and the ability to process all data at the acquisition rate, MCAT is capable of producing and processing a volume and quality of data far in excess of any current (or prior) ODPO operations. This means higher fidelity population inputs and eliminating the multi-year backlog from acquisition-to-product typical of optical campaigns. All of this is possible given a suitable observing location. Originally planned for the island of Legan, part of the Kwajalein Atoll Islands, recent developments have led to a change in venue. Specifically, the Ground-based Electro-Optical Deep Space Surveillance, or GEODSS, System of telescopes is the United States' major tracking system for deep space. This network consists of telescopes in Maui, Hawaii; Diego Garcia (Indian Ocean), and Socorro, New Mexico. A fourth optical telescope, though

  6. Path to meter class single crystal silicon (SCSi) space optics

    NASA Astrophysics Data System (ADS)

    McCarter, Douglas R.

    2012-03-01

    With the global financial crisis affecting funding for space systems development, customers are calling for lower cost systems. Yet, at the same time, these lower cost systems must have increased thermal response to operational environments and load survivability. We submit that single crystal silicon (SCSi) meets both of these requirements. This paper will highlight some key SCSi material properties, discuss the opportunities that led to the development of McCarter processing methods, and present the latest steps in the manufacturing path of McCarter Mirrors using SCSi, GFB (glass frit bonding) and MSF (McCarter super finish), including the concept drawing of a one meter SCSi lightweight mirror, which together sets up the last step toward a lower cost, high performing one meter SCSi space optic.

  7. Simulation and analysis of laser guide star adaptive optics systems for the eight to ten meter class telescopes

    SciTech Connect

    Gavel, D.T.; Olivier, S.S.

    1994-03-01

    This paper discusses the design and analysis of laser-guided adaptive optic systems for the large, 8--10 meter class telescopes. We describe a technique for calculating the expected modulation transfer function and the point spread function for a closed loop adaptive optics system, parameterized by the degree of correction and the seeing conditions. The results agree closely with simulations and experimental data, and validate well known scaling law models even at low order correction. Scaling law.model analysis of a proposed adaptive optics system at the Keck telescope leads to the conclusion that a single laser guide star beacon will be adequate for diffraction limited imaging at wavelengths between 1 and 3 am with reasonable coverage of the sky. Cone anisoplanatism will dominate wavefront correction error at the visible wavelengths unless multiple laser guide stars are used.

  8. Characterizing Exoplanets with 2-meter Class Space-based Coronagraphs

    NASA Astrophysics Data System (ADS)

    Robinson, T. D.; Marley, M. S.; Stapelfeldt, K. R.

    2015-12-01

    Several concepts now exist for small, space-based missions to directly characterize exoplanets in reflected light. In this presentation, we explore how instrumental and astrophysical parameters will affect the ability of such missions to obtain spectral and photometric observations that are useful for characterizing their planetary targets. We discuss the development of an instrument noise model suitable for studying the spectral characterization potential of a coronagraph-equipped, space-based telescope. To be consistent with near-future missions and technologies, we assume a baseline set of telescope and instrument parameters that include a 2 meter diameter primary aperture, an operational wavelength range of 0.4-1.0 μm, and an instrument spectral resolution of λ/Δλ=70. We present applications of our baseline noise simulator to a variety of spectral models of different planet types, emphasizing Earth-like planets. With our exoplanet spectral models, we explore wavelength-dependent planet-star flux ratios for main sequence stars of various effective temperatures, and discuss how coronagraph inner and outer working angle constraints will influence the potential to study different types of planets. For planets most favorable to spectroscopic characterization—including nearby Earth twins and super-Earths—we study the integration times required to achieve moderate signal-to-noise ratio spectra. We also explore the sensitivity of the integration times required to detect the base of key absorption bands (for water vapor and molecular oxygen) to coronagraph raw contrast performance, exozodiacal light levels, and the distance to the planetary system. We will also discuss prospects for detecting ocean glint, a habitability signature, from nearby Earth-like planets, as well as the extension of our models to a more distant future Large UV-Optical-InfraRed (LUVOIR) mission.

  9. Meter class carbon fiber reinforced polymer (CFRP) telescope program at the Naval Research Laboratory

    NASA Astrophysics Data System (ADS)

    Restaino, Sergio R.; Martinez, Ty; Andrews, Jonathan R.; Wilcox, Christopher C.; Santiago, Freddie; Teare, S.; Romeo, Robert; Martin, Robert; Wick, D.

    2008-07-01

    The Naval Research Laboratory (NRL) has been exploring the use of meter class telescopes using Carbon Fiber Reinforced Polymer (CFRP) material for support structure and optics, resulting in over an order of magnitude reduction in weight over traditional steel and glass telescopes. In conjunction with Composite Mirror Applications (CMA), for the past three years this program has proceeded from conceptual phase to prototype development. In this paper we will review the various stages of this program. We will also present the status of our 0.4 meter and 1.4 meter telescopes. Experimental results from these developments and testing will be shown.

  10. Reverse and concurrent engineering applied of a high resolution equipment Berkut for 1-meter class telescopes

    NASA Astrophysics Data System (ADS)

    López, R.; Granados, R.; Farah, A.

    2014-07-01

    Several factors make observational astronomy difficult for astronomers; one of them is the atmosphere. The light that a star emits is refracted when it goes through the earth's atmosphere; the result of this is that the image of a punctual star is not what the physics would lead us to expect. At the Instituto de Astronomia of the Universidad Nacional Autonoma de México (IA-UNAM) an instrument has been developed called "Berkut", which uses a high resolution technique to improve these effects and obtain interesting and valuable scientific studies. In this paper we present the mechanical reengineering and acceptance test of Berkut. This instrument was design for taking images of high resolution. Essentially, it is composed by a set basic optics which is aligned and in focus with a 1- meter class telescope. It has its own electronic components for controlling remotely a filter wheel; that allows the exchange of the filters according to the requirements of the observer, a couple of objectives mounted in a translation stage, and a CCD camera for acquiring several images per second that are used in the speckle interferometry technique. A project like Berkut needs to be multidisciplinary; astronomy, engineering, optics, mechanics, electronics, and image processing are some of the areas of knowledge used. Berkut will be used in the telescope of the Observatorio Astronomico Nacional in Tonantzintla, located in the state of Puebla, Mexico, but it can be used in any telescope 1 meter class. It is pretended to build another Berkuts for being used simultaneously in different telescopes, so it is important to keep the costs as low as possible. With this instrument we pretend to confirm the Hipparcos catalogue of binary stars besides finding exoplanets.

  11. The Bushing Test Facility: A new megavolt-class, meter-scale vacuum insulation test facility

    SciTech Connect

    Butner, J.M.; Smith, J.D.; Honig, E.M.; Ingwersen, P.M.; Umphres, J.D.; Anderson, R.G.

    1990-01-01

    Construction of the Bushing Test Facility (BTF) was completed at the Los Alamos National Laboratory (LANL) in the fall of 1989. The BTF is a new megavolt-class, meter-scale vacuum insulation test facility built to meet two primary objectives: (1) to qualify high-voltage vacuum feedthrough bushings before their installation in the electron-beam diodes of the Aurora KrF laser amplifiers and (2) to investigate fundamental issues related to surface flashover and electrical breakdown in vacuum, thereby enabling us to improve the performance and reliability of high-voltage components for future laser systems. The BTF voltage source is a low-energy (<4.4-kJ), 1-MV Marx generator whose output pulse width is variable from 100 ns to a few microseconds. The large BTF test chamber (2.1 m in diameter and 1.5 m long) allows full-sized Aurora bushings or other large-scale vacuum insulators to be tested at background pressures down to about 10{sup {minus}7} torr. This paper will further describe the facility, its experimental checkout and first bushing tests, and the plans for future vacuum insulation research. 11 refs., 5 figs.

  12. Deploying the NASA Meter Class Autonomous Telescope (MCAT) on Ascension Island

    NASA Astrophysics Data System (ADS)

    Lederer, S.; Pace, L. F.; Hickson, P.; Glesne, T.; Cowardin, H. M.; Frith, J. M.; Buckalew, B.; Maeda, R.; Douglas, D.; Nishimoto, D.

    NASA has successfully constructed the 1.3m Meter Class Autonomous Telescope (MCAT) facility on Ascension Island in the South Atlantic Ocean. MCAT is an optical telescope designed specifically to collect ground-based data for the statistical characterization of orbital debris ranging from Low Earth Orbit (LEO) through Middle Earth Orbits (MEO) and beyond to Geo Transfer and Geosynchronous Orbits (GTO/GEO). The location of Ascension Island has two distinct advantages. First, the near-equatorial location fills a significant longitudinal gap in the Ground-based Electro-Optical Deep Space Surveillance (GEODSS) network of telescopes, and second, it allows access to objects in Low Inclination Low-Earth Orbits (LILO). The MCAT facility will be controlled by a sophisticated software suite that operates the dome and telescope, assesses sky and weather conditions, conducts all necessary calibrations, defines an observing strategy (as dictated by weather, sky conditions, and the observing plan for the night), and carries out the observations. It then reduces the collected data via four primary observing modes ranging from tracking previously cataloged objects to conducting general surveys for detecting uncorrelated debris. Nightly observing plans, as well as the resulting text file of reduced data, will be transferred to and from Ascension, respectively, via a satellite connection. Post-processing occurs at NASA Johnson Space Center. Construction began in September, 2014 with dome and telescope installation occurring in April through early June, 2015. First light was achieved in June, 2015. Acceptance testing, full commissioning, and calibration of this soon-to-be fully autonomous system commenced in summer 2015. The initial characterization of the system from these tests is presented herein.

  13. Deploying the NASA Meter Class Autonomous Telescope (MCAT) on Ascension Island

    NASA Technical Reports Server (NTRS)

    Lederer, S. M.; Pace, L.; Hickson, P.; Cowardin, H. M.; Frith, J.; Buckalew, B.; Glesne, T.; Maeda, R.; Douglas, D.; Nishimoto, D.

    2015-01-01

    NASA has successfully constructed the 1.3m Meter Class Autonomous Telescope (MCAT) facility on Ascension Island in the South Atlantic Ocean. MCAT is an optical telescope designed specifically to collect ground-based data for the statistical characterization of orbital debris ranging from Low Earth Orbit (LEO) through Middle Earth Orbits (MEO) and beyond to Geo Transfer and Geosynchronous Orbits (GTO/GEO). The location of Ascension Island has two distinct advantages. First, the near-equatorial location fills a significant longitudinal gap in the Ground-based Electro-Optical Deep Space Surveillance (GEODSS) network of telescopes, and second, it allows access to objects in Low Inclination Low-Earth Orbits (LILO). The MCAT facility will be controlled by a sophisticated software suite that operates the dome and telescope, assesses sky and weather conditions, conducts all necessary calibrations, defines an observing strategy (as dictated by weather, sky conditions and the observing plan for the night), and carries out the observations. It then reduces the collected data via four primary observing modes ranging from tracking previously cataloged objects to conducting general surveys for detecting uncorrelated debris. Nightly observing plans, as well as the resulting text file of reduced data, will be transferred to and from Ascension, respectively, via a satellite connection. Post-processing occurs at NASA Johnson Space Center. Construction began in September, 2014 with dome and telescope installation occurring in April through early June, 2015. First light was achieved in June, 2015. Acceptance testing, full commissioning, and calibration of this soon-to-be fully autonomous system commenced in summer 2015. The initial characterization of the system from these tests is presented herein.

  14. Orbital Debris Detection and Tracking Strategies for the NASA/AFRL Meter Class Autonomous Telescope (MCAT)

    NASA Technical Reports Server (NTRS)

    Mulrooney, M.; Hickson, P.; Stansbery, Eugene G.

    2010-01-01

    MCAT (Meter-Class Autonomous Telescope) is a 1.3m f/4 Ritchey-Chr tien on a double horseshoe equatorial mount that will be deployed in early 2011 to the western pacific island of Legan in the Kwajalein Atoll to perform orbital debris observations. MCAT will be capable of tracking earth orbital objects at all inclinations and at altitudes from 200 km to geosynchronous. MCAT s primary objective is the detection of new orbital debris in both low-inclination low-earth orbits (LEO) and at geosynchronous earth orbit (GEO). MCAT was thus designed with a fast focal ratio and a large unvignetted image circle able to accommodate a detector sized to yield a large field of view. The selected primary detector is a close-cycle cooled 4Kx4K 15um pixel CCD camera that yields a 0.9 degree diagonal field. For orbital debris detection in widely spaced angular rate regimes, the camera must offer low read-noise performance over a wide range of framing rates. MCAT s 4-port camera operates from 100 kHz to 1.5 MHz per port at 2 e- and 10 e- read noise respectively. This enables low-noise multi-second exposures for GEO observations as well as rapid (several frames per second) exposures for LEO. GEO observations will be performed using a counter-sidereal time delay integration (TDI) technique which NASA has used successfully in the past. For MCAT the GEO survey, detection, and follow-up prediction algorithms will be automated. These algorithms will be detailed herein. For LEO observations two methods will be employed. The first, Orbit Survey Mode (OSM), will scan specific orbital inclination and altitude regimes, detect new orbital debris objects against trailed background stars, and adjust the telescope track to follow the detected object. The second, Stare and Chase Mode (SCM), will perform a stare, then detect and track objects that enter the field of view which satisfy specific rate and brightness criteria. As with GEO, the LEO operational modes will be fully automated and will be

  15. 38 CFR 8.10 - How paid.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false How paid. 8.10 Section 8.10 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS NATIONAL SERVICE LIFE INSURANCE Dividends § 8.10 How paid. (a) Except as hereinafter provided in this paragraph, a National Service Life Insurance policy shall participate...

  16. Manufacturing Challenges and Benefits When Scaling the HIAD Stacked-Torus Aeroshell to a 15 Meter Class System

    NASA Technical Reports Server (NTRS)

    Swanson, G. T.; Cheatwood, F. M.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.

    2016-01-01

    Over a decade of work has been conducted in the development of NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) deployable aeroshell technology. This effort has included multiple ground test campaigns and flight tests culminating in the HIAD project's second generation (Gen-2) aeroshell system. The HIAD project team has developed, fabricated, and tested stacked-torus inflatable structures (IS) with flexible thermal protection systems (F-TPS) ranging in diameters from 3-6 meters, with cone angles of 60 and 70 degrees. To meet NASA and commercial near-term objectives, the HIAD team must scale the current technology up to 12-15 meters in diameter. Therefore, the HIAD project's experience in scaling the technology has reached a critical juncture. Growing from a 6-meter to a 15-meter class system will introduce many new structural and logistical challenges to an already complicated manufacturing process. Although the general architecture and key aspects of the HIAD design scale well to larger vehicles, details of the technology will need to be reevaluated and possibly redesigned for use in a 15-meter-class HIAD system. These include: layout and size of the structural webbing that transfers load throughout the IS, inflatable gas barrier design, torus diameter and braid construction, internal pressure and inflation line routing, adhesives used for coating and bonding, and F-TPS gore design and seam fabrication. The logistics of fabricating and testing the IS and the F-TPS also become more challenging with increased scale. Compared to the 6-meter aeroshell (the largest HIAD built to date), a 12-meter aeroshell has four times the cross-sectional area, and a 15-meter one has over six times the area. This means that fabrication and test procedures will need to be reexamined to account for the sheer size and weight of the aeroshell components. This will affect a variety of steps in the manufacturing process, such as: stacking the tori during assembly, stitching the

  17. 41 CFR 51-8.10 - Appeals.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 1 2012-07-01 2009-07-01 true Appeals. 51-8.10 Section... MATERIALS § 51-8.10 Appeals. (a) An appeal to the Chairperson of any denial, in whole or in part, of a... denial. (b) The Chairperson shall make a determination with respect to any appeal within 20...

  18. 41 CFR 51-8.10 - Appeals.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false Appeals. 51-8.10 Section... MATERIALS § 51-8.10 Appeals. (a) An appeal to the Chairperson of any denial, in whole or in part, of a... denial. (b) The Chairperson shall make a determination with respect to any appeal within 20...

  19. 41 CFR 51-8.10 - Appeals.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 1 2013-07-01 2013-07-01 false Appeals. 51-8.10 Section... MATERIALS § 51-8.10 Appeals. (a) An appeal to the Chairperson of any denial, in whole or in part, of a... denial. (b) The Chairperson shall make a determination with respect to any appeal within 20...

  20. Spin Rate Diversity Amongst Ten-meter Class Near Earth Asteroids

    NASA Astrophysics Data System (ADS)

    Ryan, William; Ryan, Eileen V.

    2016-10-01

    The spin rates of small asteroids can provide insight into their mechanical structure, origin, and subsequent evolution. This is of more than just scientific interest since these are also the objects that will hit the Earth most frequently. Early statistics [Pravec and Harris, 2000] for Near Earth Asteroids (NEAs) with diameters of ~100 meters or less had resulted in the conclusion that many are rotating more rapidly than feasible for a gravitationally bound system of constituent components (i.e, 'rubble piles'). However, more recent studies [Holsapple, 2007; Scheeres et al. 2010] have focused on how non-gravitational cohesion mechanisms do not necessarily rule out a rubble pile structure for fast spin rate bodies. To further study this issue, we will report on the recent spin rate results for the smallest asteroids observed as part of our ongoing NEA target-of-opportunity characterization research [Ryan and Ryan, 2016] conducted using the Magdalena Ridge Observatory's 2.4-meter telescope.Spin rates determined by this program plus results from the current lightcurve database [Warner et al. 2016] indicate that the very smallest NEAs with H>29 rotate with periods of minutes or less. This implies that these objects possess significant strength, hinting that they are likely examples of truly monolithic fragments. However, our observations also show a great diversity in rotation periods for asteroids that are only slightly larger. In particular, the H~28.6 asteroids 2016 CC136 and 2016 CG18 were observed to rotate with periods approaching or exceeding ~2 hours, with the latter showing a tumbling behavior. In a subset of our database that includes 22 asteroids with H~27.5 (~10 meters) or greater, a full range of periods from less than a minute to greater than 2 hours (close to the minimal period of a self-gravitating system), have been identified. Moreover, at least three of these are in a tumbling state with multiple periods clearly identified, implying constraints on

  1. BILLIARDS: A Demonstration Mission for Hundred-Meter Class Near-Earth Asteroid Disruption

    NASA Technical Reports Server (NTRS)

    Marcus, Matthew; Sloane, Joshua; Ortiz, Oliver; Barbee, Brent William

    2015-01-01

    Collisions from near-Earth asteroids (NEAs) have the potential to cause widespread harm to life on Earth. The hypervelocity nature of these collisions means that a relatively small asteroid (about a quartermile in diameter) could cause a global disaster. Proposed strategies for deflecting or disrupting such a threatening asteroid include detonation of a nuclear explosive device (NED) in close proximity to the asteroid, as well as intercepting the asteroid with a hypervelocity kinetic impactor. NEDs allow for the delivery of large amounts of energy to a NEA for a given mass launched from the Earth, but have not yet been developed or tested for use in deep space. They also present safety and political complications, and therefore may only be used when absolutely necessary. Kinetic impactors require a relatively simple spacecraft compared to NEDs, but also deliver a much lower energy for a given launch mass. To date, no demonstration mission has been conducted for either case, and such a demonstration mission must be conducted prior to the need to utilize them during an actual scenario to ensure that an established, proven system is available for planetary defense when the need arises. One method that has been proposed to deliver a kinetic impactor with impact energy approaching that of an NED is the "billiard-ball" approach. This approach would involve capturing an asteroid approximately ten meters in diameter with a relatively small spacecraft (compared to the launch mass of an equivalent direct kinetic impactor), and redirecting it into the path of an Earth-threatening asteroid. This would cause an impact which would disrupt the Earth-threatening asteroid or deflect it from its Earth-crossing trajectory. The BILLIARDS Project seeks to perform a demonstration of this mission concept in order to establish a protocol that can be used in the event of an impending Earth/asteroid collision. In order to accomplish this objective, the mission must (1) rendezvous with a

  2. The meter-class carbon fiber reinforced polymer mirror and segmented mirror telescope at the Naval Postgraduate School

    NASA Astrophysics Data System (ADS)

    Wilcox, Christopher; Fernandez, Bautista; Bagnasco, John; Martinez, Ty; Romeo, Robert; Agrawal, Brij

    2015-03-01

    The Adaptive Optics Center of Excellence for National Security at the Naval Postgraduate School has implemented a technology testing platform and array of facilities for next-generation space-based telescopes and imaging system development. The Segmented Mirror Telescope is a 3-meter, 6 segment telescope with actuators on its mirrors for system optical correction. Currently, investigation is being conducted in the use of lightweight carbon fiber reinforced polymer structures for large monolithic optics. Advantages of this material include lower manufacturing costs, very low weight, and high durability and survivability compared to its glass counterparts. Design and testing has begun on a 1-meter, optical quality CFRP parabolic mirror for the purpose of injecting collimated laser light through the SMT primary and secondary mirrors as well as the following aft optics that include wavefront sensors and deformable mirrors. This paper will present the design, testing, and usage of this CFRP parabolic mirror and the current path moving forward with this ever-evolving technology.

  3. 40 CFR 8.10 - Cases of emergency.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Cases of emergency. 8.10 Section 8.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ENVIRONMENTAL IMPACT ASSESSMENT OF NONGOVERNMENTAL ACTIVITIES IN ANTARCTICA § 8.10 Cases of emergency. This part shall not apply to activities...

  4. 40 CFR 8.10 - Cases of emergency.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Cases of emergency. 8.10 Section 8.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ENVIRONMENTAL IMPACT ASSESSMENT OF NONGOVERNMENTAL ACTIVITIES IN ANTARCTICA § 8.10 Cases of emergency. This part shall not apply to activities taken in cases of emergency relating...

  5. dSSURGO: Development and validation of a 30 meter digital soil class product over the 8-million square kilometer contiguous United States

    NASA Astrophysics Data System (ADS)

    Chaney, Nathaniel W.; Hempel, Jonathan W.; Odgers, Nathan; McBratney, Alexander B.; Wood, Eric F.

    2015-04-01

    An increase in computing resources and accessibility of high-resolution land data allows us to address many unresolved earth science challenges, such as the lack of high-resolution soil data at continental scales. This data would be helpful for agriculture, hydrologic modeling, and resource planning. Current available continental soil datasets are mainly based on legacy polygon datasets built from surveys and local expert knowledge. These products are difficult to use at regional to continental scales due to surveyor biases (e.g. county boundary discontinuities), varying effective spatial resolution, and un-surveyed areas. A path forward is to use machine learning (e.g. DSMART) to harmonize and spatially disaggregate these products by relating high resolution soil covariates to available observations. In this study, the DSMART algorithm is applied over CONUS at a 30 meter spatial resolution. The gSSURGO database provides the ground truth and the USGS NED, MLRC NLCD, and USGS aeroradiometric datasets the soil covariates. Using a moving window approach, random forests are fit and used to estimate the 50 most probable soil classes and their associated probabilities at each 30 meter grid cell over CONUS (~9 billion grid cells). We will discuss the value and accessibility of the new dataset, its potential applications, and preliminary validation results.

  6. Flow Meter

    NASA Astrophysics Data System (ADS)

    1990-01-01

    Hedland Flow Meters manufactures a complete line of flow meters used in industrial operations to monitor the flow of oil, water or other liquids, air and other compressed gases, including caustics or corrosive liquids/gases. The company produces more than 1,000 types of flow meters featuring rugged construction, simplicity of installation and the ability to operate in any position.

  7. Plugging meter

    DOEpatents

    Nagai, Akinori

    1979-01-01

    A plugging meter for automatically measuring the impurity concentration in a liquid metal is designed to have parallel passages including a cooling passage provided with a plugging orifice and with a flow meter, and a by-pass passage connected in series to a main passage having another flow meter, so that the plugging points may be obtained from the outputs of both flow meters. The plugging meter has a program signal generator, a flow-rate ratio setter and a comparator, and is adapted to change the temperature of the plugging orifice in accordance with a predetermined pattern or gradient, by means of a signal representative of the temperature of plugging orifice and a flow-rate ratio signal obtained from the outputs of both flow meters. This plugging meter affords an automatic and accurate measurement of a multi-plugging phenomenon taking place at the plugging orifice.

  8. 24 CFR 8.10 - General prohibitions against employment discrimination.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... employment discrimination. 8.10 Section 8.10 Housing and Urban Development Office of the Secretary... prohibitions against employment discrimination. (a) No qualified individual with handicaps shall, solely on the basis of handicap, be subjected to discrimination in employment under any program or activity...

  9. 40 CFR 8.10 - Cases of emergency.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Cases of emergency. 8.10 Section 8.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL ENVIRONMENTAL IMPACT ASSESSMENT OF... in cases of emergency relating to the safety of human life or of ships, aircraft, equipment...

  10. 24 CFR 8.10 - General prohibitions against employment discrimination.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... employment discrimination. 8.10 Section 8.10 Housing and Urban Development Office of the Secretary... prohibitions against employment discrimination. (a) No qualified individual with handicaps shall, solely on the basis of handicap, be subjected to discrimination in employment under any program or activity...

  11. 29 CFR 8.10 - Filing and service.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... (e) Service upon the Department of Labor and other interested parties. A copy of all documents filed... 29 Labor 1 2010-07-01 2010-07-01 true Filing and service. 8.10 Section 8.10 Labor Office of the Secretary of Labor PRACTICE BEFORE THE ADMINISTRATIVE REVIEW BOARD WITH REGARD TO FEDERAL SERVICE...

  12. 29 CFR 8.10 - Filing and service.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... (e) Service upon the Department of Labor and other interested parties. A copy of all documents filed... 29 Labor 1 2014-07-01 2013-07-01 true Filing and service. 8.10 Section 8.10 Labor Office of the Secretary of Labor PRACTICE BEFORE THE ADMINISTRATIVE REVIEW BOARD WITH REGARD TO FEDERAL SERVICE...

  13. 29 CFR 8.10 - Filing and service.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... (e) Service upon the Department of Labor and other interested parties. A copy of all documents filed... 29 Labor 1 2013-07-01 2013-07-01 false Filing and service. 8.10 Section 8.10 Labor Office of the Secretary of Labor PRACTICE BEFORE THE ADMINISTRATIVE REVIEW BOARD WITH REGARD TO FEDERAL SERVICE...

  14. 29 CFR 8.10 - Filing and service.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... (e) Service upon the Department of Labor and other interested parties. A copy of all documents filed... 29 Labor 1 2012-07-01 2012-07-01 false Filing and service. 8.10 Section 8.10 Labor Office of the Secretary of Labor PRACTICE BEFORE THE ADMINISTRATIVE REVIEW BOARD WITH REGARD TO FEDERAL SERVICE...

  15. 29 CFR 8.10 - Filing and service.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (e) Service upon the Department of Labor and other interested parties. A copy of all documents filed... 29 Labor 1 2011-07-01 2011-07-01 false Filing and service. 8.10 Section 8.10 Labor Office of the Secretary of Labor PRACTICE BEFORE THE ADMINISTRATIVE REVIEW BOARD WITH REGARD TO FEDERAL SERVICE...

  16. Coping Strategies at the Ages 8, 10 and 12

    ERIC Educational Resources Information Center

    Zsolnai, Aniko; Kasik, Laszlo; Braunitzer, Gabor

    2015-01-01

    The aim of the cross-sectional study was to reveal what coping strategies 8, 10- and 12-year-old Hungarian students (N?=?167) use in situations that are frustrating, either for themselves or their peers. The coping strategies in school situations were assessed by our own questionnaires. The instrument enables the investigation of the following…

  17. Saturation meter

    DOEpatents

    Gregurech, S.

    1984-08-01

    A saturation meter for use in a pressurized water reactor plant comprising a differential pressure transducer having a first and second pressure sensing means and an alarm. The alarm is connected to the transducer and is preset to activate at a level of saturation prior to the formation of a steam void in the reactor vessel.

  18. Your Glucose Meter

    MedlinePlus

    ... by Audience For Women Women's Health Topics Your Glucose Meter Share Tweet Linkedin Pin it More sharing ... Español Basic Facts 7 Tips for Testing Your Blood Sugar and Caring for Your Meter Glucose meters test ...

  19. Portable peak flow meters.

    PubMed

    McNaughton, J P

    1997-02-01

    There are several portable peak flow meters available. These instruments vary in construction and performance. Guidelines are recommended for minimum performance and testing of portable peak flow meters, with the aim of establishing a procedure for standardizing all peak flow meters. Future studies to clarify the usefulness of mechanical test apparatus and clinical trials of peak flow meters are also recommended. PMID:9098706

  20. Quad RF power meter

    SciTech Connect

    Stone, D.W.

    1987-09-01

    This report shows how to construct a four-channel RF power meter from circuit boards and components found in a Hewlett Packard Model 432A Power Meter. Included are descriptions of necessary modifications, electrical circuit diagrams, and a parts list. Each of the four power meters is compatible with a Hewlett Packard 432A Power Meter.

  1. A Matter of Meter

    ERIC Educational Resources Information Center

    Harrison, David L.

    2006-01-01

    Writing verse is a learning experience. Arranging words, sounds and syllables can turn everyday language into metered language (language that can be measured), and metered language is the definition of verse. This article discusses the use of meter in helping students establish sets of syllables and lines that can be counted, enabling them to…

  2. Balanced Flow Meters without Moving Parts

    NASA Technical Reports Server (NTRS)

    Kelley, Anthony R.; VanBuskirk, Paul

    2008-01-01

    Balanced flow meters are recent additions to an established class of simple, rugged flow meters that contain no moving parts in contact with flow and are based on measurement of pressure drops across objects placed in flow paths. These flow meters are highly accurate, minimally intrusive, easily manufacturable, and reliable. A balanced flow meter can be easily mounted in a flow path by bolting it between conventional pipe flanges. A balanced flow meter can be used to measure the flow of any of a variety of liquids or gases, provided that it has been properly calibrated. Relative to the standard orifice-plate flow meter, the balanced flow meter introduces less turbulence and two times less permanent pressure loss and is therefore capable of offering 10 times greater accuracy and repeatability with less dissipation of energy. A secondary benefit of the reduction of turbulence is the reduction of vibration and up to 15 times less acoustic noise generation. Both the balanced flow meter and the standard orifice-plate flow meter are basically disks that contain holes and are instrumented with pressure transducers on their upstream and downstream faces. The most obvious difference between them is that the standard orifice plate contains a single, central hole while the balanced flow meter contains multiple holes. The term 'balanced' signifies that in designing the meter, the sizes and locations of the holes are determined in an optimization procedure that involves balancing of numerous factors, including volumetric flow, mass flow, dynamic pressure, kinetic energy, all in an effort to minimize such undesired effects as turbulence, pressure loss, dissipation of kinetic energy, and non-repeatability and nonlinearity of response over the anticipated range of flow conditions. Due to proper balancing of these factors, recent testing demonstrated that the balanced flow-meter performance was similar to a Venturi tube in both accuracy and pressure recovery, but featured reduced

  3. 26 CFR 5c.168(f)(8)-10 - Leases between related parties. [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Leases between related parties. 5c.168(f)(8)-10 Section 5c.168(f)(8)-10 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) TEMPORARY INCOME TAX REGULATIONS UNDER THE ECONOMIC RECOVERY TAX ACT OF 1981 §...

  4. Substrate specificity of papain dynamic structures for peptides consisting of 8-10 GLY residues

    NASA Astrophysics Data System (ADS)

    Nishiyama, Katsuhiko

    2011-01-01

    We investigated the substrate specificity of papain dynamic structures for peptides of 8-10 glycine residues (8-10GLY) via molecular dynamics and docking simulations. The substrate specificity of papain for 8-10GLY fluctuated considerably with time. There were several residues that were different among those that had a significant impact on binding (RESIDUES_IMPACT) with 10GLY, 9GLY, and 8GLY. Modification of these different residues should allow for control of substrate specificity, providing a framework for modifying substrate specificity in papain and other enzymes.

  5. 8-Meter UV/Optical Space Telescope

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2008-01-01

    This slide presentation proposes using the unprecedented capability of the planned Ares V launch vehicle, to place a 8 meter monolithic space telescope at the Earth-Sun L2 point. This new capability enables a new design pardigm -- simplicity. The six to eight meter class telescope with a massive high Technical Readiness Level ground observatory class monolithic primary mirror has been determined feasible. The proposed design, structural analysis, spacecraft design and shroud integration, thermal analysis, propulsion system, guidance navigation and pointing control assumptions about the avionics, and power systems, operational lifetime, and the idea of in-space servicing are reviewed.

  6. 8-Meter UV/Optical Space Telescope at L2

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2008-01-01

    The unprecedented mass/volume capability of an Ares V enables the launch of 8 meter class monolithic space telescopes to the Earth-Sun L2 point. NASA MSFC has determined that a 6 to 8 meter class telescope using a massive high-TRL ground observatory class monolithic primary mirror is feasible. Mature, High-TRL design enables early deployment. Science Instruments, Expendables and Limited Life Components can be replace periodically via Spacecraft Autonomous Rendezvous and Docking.

  7. Groundwater-Seepage Meter

    NASA Technical Reports Server (NTRS)

    Walthall, Harry G.; Reay, William G.

    1993-01-01

    Instrument measures seepage of groundwater into inland or coastal body of water. Positioned at depth as great as 40 meters, and measures flow at low rate and low pressure differential. Auxiliary pressure meter provides data for correlation of flow of groundwater with tides and sea states. Seepage meter operates independently for several weeks. Its sampling rate adjusted to suit hydrologic conditions; to measure more frequently when conditions changing rapidly. Used in water-quality management and for biological and geological research. Potential industrial uses include measurement of seepage of caustic and corrosive liquids.

  8. DC attenuation meter

    DOEpatents

    Hargrove, Douglas L.

    2004-09-14

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  9. Space Age Meter.

    ERIC Educational Resources Information Center

    Phillips, Julie

    1983-01-01

    Discusses the history and evolution of measurement standards from 3000 BC to the modern metric system. Traces measurement techniques from comparisons with the human body to use of atomic clocks and lasers to establish the length of a meter. (JM)

  10. DIGITAL Q METER

    DOEpatents

    Briscoe, W.L.

    1962-02-13

    A digital Q meter is described for measuring the Q of mechanical or electrical devices. The meter comprises in combination a transducer coupled to an input amplifier, and an upper and lower level discriminator coupled to the amplifier and having their outputs coupled to an anticoincidence gate. The output of the gate is connected to a scaler. The lower level discriminator is adjusted to a threshold level of 36.8 percent of the operating threshold level of the upper level discriminator. (AEC)

  11. Arrival Metering Precision Study

    NASA Technical Reports Server (NTRS)

    Prevot, Thomas; Mercer, Joey; Homola, Jeffrey; Hunt, Sarah; Gomez, Ashley; Bienert, Nancy; Omar, Faisal; Kraut, Joshua; Brasil, Connie; Wu, Minghong, G.

    2015-01-01

    This paper describes the background, method and results of the Arrival Metering Precision Study (AMPS) conducted in the Airspace Operations Laboratory at NASA Ames Research Center in May 2014. The simulation study measured delivery accuracy, flight efficiency, controller workload, and acceptability of time-based metering operations to a meter fix at the terminal area boundary for different resolution levels of metering delay times displayed to the air traffic controllers and different levels of airspeed information made available to the Time-Based Flow Management (TBFM) system computing the delay. The results show that the resolution of the delay countdown timer (DCT) on the controllers display has a significant impact on the delivery accuracy at the meter fix. Using the 10 seconds rounded and 1 minute rounded DCT resolutions resulted in more accurate delivery than 1 minute truncated and were preferred by the controllers. Using the speeds the controllers entered into the fourth line of the data tag to update the delay computation in TBFM in high and low altitude sectors increased air traffic control efficiency and reduced fuel burn for arriving aircraft during time based metering.

  12. CD44 Splice Variant v8-10 as a Marker of Serous Ovarian Cancer Prognosis.

    PubMed

    Sosulski, Amanda; Horn, Heiko; Zhang, Lihua; Coletti, Caroline; Vathipadiekal, Vinod; Castro, Cesar M; Birrer, Michael J; Nagano, Osamu; Saya, Hideyuki; Lage, Kasper; Donahoe, Patricia K; Pépin, David

    2016-01-01

    CD44 is a transmembrane hyaluronic acid receptor gene that encodes over 100 different tissue-specific protein isoforms. The most ubiquitous, CD44 standard, has been used as a cancer stem cell marker in ovarian and other cancers. Expression of the epithelial CD44 variant containing exons v8-10 (CD44v8-10) has been associated with more chemoresistant and metastatic tumors in gastrointestinal and breast cancers, but its role in ovarian cancer is unknown; we therefore investigated its use as a prognostic marker in this disease. The gene expression profiles of 254 tumor samples from The Cancer Genome Atlas RNAseqV2 were analyzed for the presence of CD44 isoforms. A trend for longer survival was observed in patients with high expression of CD44 isoforms that include exons v8-10. Immunohistochemical (IHC) analysis of tumors for presence of CD44v8-10 was performed on an independent cohort of 210 patients with high-grade serous ovarian cancer using a tumor tissue microarray. Patient stratification based on software analysis of staining revealed a statistically significant increase in survival in patients with the highest levels of transmembrane protein expression (top 10 or 20%) compared to those with the lowest expression (bottom 10 and 20%) (p = 0.0181, p = 0.0262 respectively). Expression of CD44v8-10 in primary ovarian cancer cell lines was correlated with a predominantly epithelial phenotype characterized by high expression of epithelial markers and low expression of mesenchymal markers by qPCR, Western blot, and IHC. Conversely, detection of proteolytically cleaved and soluble extracellular domain of CD44v8-10 in patient ascites samples was correlated with significantly worse prognosis (p<0.05). Therefore, presence of transmembrane CD44v8-10 on the surface of primary tumor cells may be a marker of a highly epithelial tumor with better prognosis while enzymatic cleavage of CD44v8-10, as detected by presence of the soluble extracellular domain in ascites fluid, may be

  13. CD44 Splice Variant v8-10 as a Marker of Serous Ovarian Cancer Prognosis

    PubMed Central

    Zhang, Lihua; Coletti, Caroline; Vathipadiekal, Vinod; Castro, Cesar M.; Birrer, Michael J.; Nagano, Osamu; Saya, Hideyuki; Lage, Kasper; Donahoe, Patricia K.; Pépin, David

    2016-01-01

    CD44 is a transmembrane hyaluronic acid receptor gene that encodes over 100 different tissue-specific protein isoforms. The most ubiquitous, CD44 standard, has been used as a cancer stem cell marker in ovarian and other cancers. Expression of the epithelial CD44 variant containing exons v8-10 (CD44v8-10) has been associated with more chemoresistant and metastatic tumors in gastrointestinal and breast cancers, but its role in ovarian cancer is unknown; we therefore investigated its use as a prognostic marker in this disease. The gene expression profiles of 254 tumor samples from The Cancer Genome Atlas RNAseqV2 were analyzed for the presence of CD44 isoforms. A trend for longer survival was observed in patients with high expression of CD44 isoforms that include exons v8-10. Immunohistochemical (IHC) analysis of tumors for presence of CD44v8-10 was performed on an independent cohort of 210 patients with high-grade serous ovarian cancer using a tumor tissue microarray. Patient stratification based on software analysis of staining revealed a statistically significant increase in survival in patients with the highest levels of transmembrane protein expression (top 10 or 20%) compared to those with the lowest expression (bottom 10 and 20%) (p = 0.0181, p = 0.0262 respectively). Expression of CD44v8-10 in primary ovarian cancer cell lines was correlated with a predominantly epithelial phenotype characterized by high expression of epithelial markers and low expression of mesenchymal markers by qPCR, Western blot, and IHC. Conversely, detection of proteolytically cleaved and soluble extracellular domain of CD44v8-10 in patient ascites samples was correlated with significantly worse prognosis (p<0.05). Therefore, presence of transmembrane CD44v8-10 on the surface of primary tumor cells may be a marker of a highly epithelial tumor with better prognosis while enzymatic cleavage of CD44v8-10, as detected by presence of the soluble extracellular domain in ascites fluid, may be

  14. Biotransformation of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) by denitrifying Pseudomonas sp. strain FA1.

    PubMed

    Bhushan, Bharat; Paquet, Louise; Spain, Jim C; Hawari, Jalal

    2003-09-01

    The microbial and enzymatic degradation of a new energetic compound, 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), is not well understood. Fundamental knowledge about the mechanism of microbial degradation of CL-20 is essential to allow the prediction of its fate in the environment. In the present study, a CL-20-degrading denitrifying strain capable of utilizing CL-20 as the sole nitrogen source, Pseudomonas sp. strain FA1, was isolated from a garden soil. Studies with intact cells showed that aerobic conditions were required for bacterial growth and that anaerobic conditions enhanced CL-20 biotransformation. An enzyme(s) involved in the initial biotransformation of CL-20 was shown to be membrane associated and NADH dependent, and its expression was up-regulated about 2.2-fold in CL-20-induced cells. The rates of CL-20 biotransformation by the resting cells and the membrane-enzyme preparation were 3.2 +/- 0.1 nmol h(-1) mg of cell biomass(-1) and 11.5 +/- 0.4 nmol h(-1) mg of protein(-1), respectively, under anaerobic conditions. In the membrane-enzyme-catalyzed reactions, 2.3 nitrite ions (NO(2)(-)), 1.5 molecules of nitrous oxide (N(2)O), and 1.7 molecules of formic acid (HCOOH) were produced per reacted CL-20 molecule. The membrane-enzyme preparation reduced nitrite to nitrous oxide under anaerobic conditions. A comparative study of native enzymes, deflavoenzymes, and a reconstituted enzyme(s) and their subsequent inhibition by diphenyliodonium revealed that biotransformation of CL-20 is catalyzed by a membrane-associated flavoenzyme. The latter catalyzed an oxygen-sensitive one-electron transfer reaction that caused initial N denitration of CL-20. PMID:12957905

  15. Biotransformation of 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-Hexaazaisowurtzitane (CL-20) by Denitrifying Pseudomonas sp. Strain FA1

    PubMed Central

    Bhushan, Bharat; Paquet, Louise; Spain, Jim C.; Hawari, Jalal

    2003-01-01

    The microbial and enzymatic degradation of a new energetic compound, 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), is not well understood. Fundamental knowledge about the mechanism of microbial degradation of CL-20 is essential to allow the prediction of its fate in the environment. In the present study, a CL-20-degrading denitrifying strain capable of utilizing CL-20 as the sole nitrogen source, Pseudomonas sp. strain FA1, was isolated from a garden soil. Studies with intact cells showed that aerobic conditions were required for bacterial growth and that anaerobic conditions enhanced CL-20 biotransformation. An enzyme(s) involved in the initial biotransformation of CL-20 was shown to be membrane associated and NADH dependent, and its expression was up-regulated about 2.2-fold in CL-20-induced cells. The rates of CL-20 biotransformation by the resting cells and the membrane-enzyme preparation were 3.2 ± 0.1 nmol h−1 mg of cell biomass−1 and 11.5 ± 0.4 nmol h−1 mg of protein−1, respectively, under anaerobic conditions. In the membrane-enzyme-catalyzed reactions, 2.3 nitrite ions (NO2−), 1.5 molecules of nitrous oxide (N2O), and 1.7 molecules of formic acid (HCOOH) were produced per reacted CL-20 molecule. The membrane-enzyme preparation reduced nitrite to nitrous oxide under anaerobic conditions. A comparative study of native enzymes, deflavoenzymes, and a reconstituted enzyme(s) and their subsequent inhibition by diphenyliodonium revealed that biotransformation of CL-20 is catalyzed by a membrane-associated flavoenzyme. The latter catalyzed an oxygen-sensitive one-electron transfer reaction that caused initial N denitration of CL-20. PMID:12957905

  16. 49 CFR 192.5 - Class locations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... under this section. (1) A “class location unit” is an onshore area that extends 220 yards (200 meters...) An area where the pipeline lies within 100 yards (91 meters) of either a building or a small, well... 2, 3, and 4 may be adjusted as follows: (1) A Class 4 location ends 220 yards (200 meters) from...

  17. 49 CFR 192.5 - Class locations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... under this section. (1) A “class location unit” is an onshore area that extends 220 yards (200 meters...) An area where the pipeline lies within 100 yards (91 meters) of either a building or a small, well... 2, 3, and 4 may be adjusted as follows: (1) A Class 4 location ends 220 yards (200 meters) from...

  18. 49 CFR 192.5 - Class locations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... under this section. (1) A “class location unit” is an onshore area that extends 220 yards (200 meters...) An area where the pipeline lies within 100 yards (91 meters) of either a building or a small, well... 2, 3, and 4 may be adjusted as follows: (1) A Class 4 location ends 220 yards (200 meters) from...

  19. 49 CFR 192.5 - Class locations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... under this section. (1) A “class location unit” is an onshore area that extends 220 yards (200 meters...) An area where the pipeline lies within 100 yards (91 meters) of either a building or a small, well... 2, 3, and 4 may be adjusted as follows: (1) A Class 4 location ends 220 yards (200 meters) from...

  20. Neutron dose equivalent meter

    DOEpatents

    Olsher, Richard H.; Hsu, Hsiao-Hua; Casson, William H.; Vasilik, Dennis G.; Kleck, Jeffrey H.; Beverding, Anthony

    1996-01-01

    A neutron dose equivalent detector for measuring neutron dose capable of accurately responding to neutron energies according to published fluence to dose curves. The neutron dose equivalent meter has an inner sphere of polyethylene, with a middle shell overlying the inner sphere, the middle shell comprising RTV.RTM. silicone (organosiloxane) loaded with boron. An outer shell overlies the middle shell and comprises polyethylene loaded with tungsten. The neutron dose equivalent meter defines a channel through the outer shell, the middle shell, and the inner sphere for accepting a neutron counter tube. The outer shell is loaded with tungsten to provide neutron generation, increasing the neutron dose equivalent meter's response sensitivity above 8 MeV.

  1. Elbow mass flow meter

    DOEpatents

    McFarland, Andrew R.; Rodgers, John C.; Ortiz, Carlos A.; Nelson, David C.

    1994-01-01

    Elbow mass flow meter. The present invention includes a combination of an elbow pressure drop generator and a shunt-type mass flow sensor for providing an output which gives the mass flow rate of a gas that is nearly independent of the density of the gas. For air, the output is also approximately independent of humidity.

  2. Metering Characteristics of Carburetors

    NASA Technical Reports Server (NTRS)

    Tice, Percival S; Dickinson, H C

    1919-01-01

    Report presents the results of an extensive experimental investigation of the performance of different types of carburetors as effecting the maintenance under all conditions of correct ratio between the weights of fuel and air. It also gives a description of the Bureau of Standards carburetor test plant, test equipment and measuring instruments used to determine the metering characteristics of carburetors.

  3. Charge depletion meter

    NASA Astrophysics Data System (ADS)

    Schneider, J. F.

    1984-11-01

    This invention relates to a charge depletion meter apparatus having a current to frequency converter to sense and convert the current drain of a battery source to a digital signal which is divided and then accumulated in a counter. An LCD display unit displays the accumulated charge which is received from the counter.

  4. Rhythmic Meter Munchies

    ERIC Educational Resources Information Center

    Quinn, Ashley

    2005-01-01

    In this article, the author presents an activity which allows students to construct various rhythm patterns in 2/4, 3/4, and 4/4 meter by using M&Ms and pretzels as an extrinsic motivation. Rhythmic notation is a foundation for learning music concepts. Engaging students in representative modules helps them to learn and recognize note values and…

  5. Measurement error analysis of taxi meter

    NASA Astrophysics Data System (ADS)

    He, Hong; Li, Dan; Li, Hang; Zhang, Da-Jian; Hou, Ming-Feng; Zhang, Shi-pu

    2011-12-01

    The error test of the taximeter is divided into two aspects: (1) the test about time error of the taximeter (2) distance test about the usage error of the machine. The paper first gives the working principle of the meter and the principle of error verification device. Based on JJG517 - 2009 "Taximeter Verification Regulation ", the paper focuses on analyzing the machine error and test error of taxi meter. And the detect methods of time error and distance error are discussed as well. In the same conditions, standard uncertainty components (Class A) are evaluated, while in different conditions, standard uncertainty components (Class B) are also evaluated and measured repeatedly. By the comparison and analysis of the results, the meter accords with JJG517-2009, "Taximeter Verification Regulation ", thereby it improves the accuracy and efficiency largely. In actual situation, the meter not only makes up the lack of accuracy, but also makes sure the deal between drivers and passengers fair. Absolutely it enriches the value of the taxi as a way of transportation.

  6. Digital Receiver Phase Meter

    NASA Technical Reports Server (NTRS)

    Marcin, Martin; Abramovici, Alexander

    2008-01-01

    The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

  7. Turbine meters for liquid measurement

    SciTech Connect

    Yon, M.C.

    1984-04-01

    Turbine meters presently used for liquid measurement are presented here. Through the evolution of technology, the turbine meter has maintained its reliability and ruggedness while attaining a high degree of accuracy. The paper attempts to explain the basic principles involved with the utilization of turbine meters, as well as the application of the meter by the aerospace industry, petroleum industry, and petrochemical industry. The use of turbine meters for custody transfer of refined products and pipeline systems, tankers and barge loading or unloading of crude oil has brought the turbine meter to worldwide recognition as a primary register for the exchange of energy.

  8. Flow metering valve

    DOEpatents

    Blaedel, Kenneth L.

    1985-01-01

    An apparatus for metering fluids at high pressures of about 20,000 to 60,000 psi is disclosed. The apparatus includes first and second plates which are positioned adjacent each other to form a valve chamber. The plates are made of materials which have substantially equal elastic properties. One plate has a planar surface area, and the other a recessed surface area defined by periphery and central lips. When the two plates are positioned in adjacent contacting relationship, a valve chamber is formed between the planar surface area and the recessed surface area. Fluid is introduced into the chamber and exits therefrom when a deformation occurs at positions where they no longer form a valve seat. This permits the metering of fluids at high pressures and at slow variable rates. Fluid then exits from the chamber until an applied external force becomes large enough to bring the valve seats back into contact.

  9. Flow metering valve

    DOEpatents

    Blaedel, K.L.

    1983-11-03

    An apparatus for metering fluids at high pressures of about 20,000 to 60,000 psi is disclosed. The apparatus includes first and second plates which are positioned adjacent each other to form a valve chamber. The plates are made of materials which have substantially equal elastic properties. One plate has a planar surface area, and the other a recessed surface area defined by periphery and central lips. When the two plates are positioned in adjacent contacting relationship, a valve chamber is formed between the planar surface area and the recessed surface area. Fluid is introduced into the chamber and exits therefrom when a deformation occurs at positions where they no longer form a valve seat. This permits the metering of fluids at high pressures and at slow variable rates. Fluid then exits from the chamber until an applied external force becomes large enough to bring the valve seats back into contact.

  10. Period meter for reactors

    DOEpatents

    Rusch, Gordon K.

    1976-01-06

    An improved log N amplifier type nuclear reactor period meter with reduced probability for noise-induced scrams is provided. With the reactor at low power levels a sampling circuit is provided to determine the reactor period by measuring the finite change in the amplitude of the log N amplifier output signal for a predetermined time period, while at high power levels, differentiation of the log N amplifier output signal provides an additional measure of the reactor period.

  11. Synthesis of 2,4,8,10-tetroxaspiro5,5undecane

    NASA Technical Reports Server (NTRS)

    Poshkus, A. C. (Inventor)

    1985-01-01

    Pentaerythritol is converted to its diformal, 2,4,8,10-tetroxaspirol5.5undecane, by heating it to a temperature within the range of about 110 to 150 C, for a period of up to 10 minutes, in the presence of a slight excess of paraformaldehyde and of a catalytic quantity of an acid catalyst such as sulfuric acid. The reaction may be carried out in two steps, by forming first the monoformal, then the diformal. In any case, total reaction time is about 10 minutes, and yield of diformal are greater than 90%. Previous processes require hours or days, and often, tedious operating procedures.

  12. A Triad of Highly Reduced, Linear Iron Nitrosyl Complexes: {FeNO}(8-10).

    PubMed

    Chalkley, Matthew J; Peters, Jonas C

    2016-09-19

    Given the importance of Fe-NO complexes in both human biology and the global nitrogen cycle, there has been interest in understanding their diverse electronic structures. Herein a redox series of isolable iron nitrosyl complexes stabilized by a tris(phosphine)borane (TPB) ligand is described. These structurally characterized iron nitrosyl complexes reside in the following highly reduced Enemark-Feltham numbers: {FeNO}(8) , {FeNO}(9) , and {FeNO}(10) . These {FeNO}(8-10) compounds are each low-spin, and feature linear yet strongly activated nitric oxide ligands. Use of Mössbauer, EPR, NMR, UV/Vis, and IR spectroscopy, in conjunction with DFT calculations, provides insight into the electronic structures of this uncommon redox series of iron nitrosyl complexes. In particular, the data collectively suggest that {TPBFeNO}(8-10) are all remarkably covalent. This covalency is likely responsible for the stability of this system across three highly reduced redox states that correlate with unusually high Enemark-Feltham numbers. PMID:27560776

  13. DISSOLUTION OF PLUTONIUM METAL IN 8-10 M NITRIC ACID

    SciTech Connect

    Rudisill, T.; Pierce, R.

    2012-02-21

    The H-Canyon facility will be used to dissolve Pu metal for subsequent purification and conversion to plutonium dioxide (PuO{sub 2}) using Phase II of HB-Line. To support the new mission, the development of a Pu metal dissolution flowsheet which utilizes concentrated (8-10 M) nitric acid (HNO{sub 3}) solutions containing potassium fluoride (KF) is required. Dissolution of Pu metal in concentrated HNO{sub 3} is desired to eliminate the need to adjust the solution acidity prior to purification by anion exchange. The preferred flowsheet would use 8-10 M HNO{sub 3}, 0.015-0.07 M KF, and 0.5-1.0 g/L Gd to dissolve the Pu up to 6.75 g/L. An alternate flowsheet would use 8-10 M HNO{sub 3}, 0.1-0.2 M KF, and 1-2 g/L B to dissolve the Pu. The targeted average Pu metal dissolution rate is 20 mg/min-cm{sup 2}, which is sufficient to dissolve a 'standard' 2250-g Pu metal button in 24 h. Plutonium metal dissolution rate measurements showed that if Gd is used as the nuclear poison, the optimum dissolution conditions occur in 10 M HNO{sub 3}, 0.04-0.05 M KF, and 0.5-1.0 g/L Gd at 112 to 116 C (boiling). These conditions will result in an estimated Pu metal dissolution rate of {approx}11-15 mg/min-cm{sup 2} and will result in dissolution times of 36-48 h for standard buttons. The recommended minimum and maximum KF concentrations are 0.03 M and 0.07 M, respectively. The maximum KF concentration is dictated by a potential room-temperature Pu-Gd-F precipitation issue at low Pu concentrations. The purpose of the experimental work described in this report was two-fold. Initially a series of screening experiments was performed to measure the dissolution rate of Pu metal as functions of the HNO{sub 3}, KF, and Gd or B concentrations. The objective of the screening tests was to propose optimized conditions for subsequent flowsheet demonstration tests. Based on the rate measurements, this study found that optimal dissolution conditions in solutions containing 0.5-1.0 g/L Gd occurred in 8-10

  14. Acoustic velocity meter systems

    USGS Publications Warehouse

    Laenen, Antonius

    1985-01-01

    Acoustic velocity meter (AVM) systems operate on the principles that the point-to-point upstream traveltime of an acoustic pulse is longer than the downstream traveltime and that this difference in traveltime can be accurately measured by electronic devices. An AVM system is capable of recording water velocity (and discharge) under a wide range of conditions, but some constraints apply: 1. Accuracy is reduced and performance is degraded if the acoustic path is not a continuous straight line. The path can be bent by reflection if it is too close to a stream boundary or by refraction if it passes through density gradients resulting from variations in either water temperature or salinity. For paths of less than 100 m, a temperature gradient of 0.1' per meter causes signal bending less than 0.6 meter at midchannel, and satisfactory velocity results can be obtained. Reflection from stream boundaries can cause signal cancellation if boundaries are too close to signal path. 2. Signal strength is attenuated by particles or bubbles that absorb, spread, or scatter sound. The concentration of particles or bubbles that can be tolerated is a function of the path length and frequency of the acoustic signal. 3. Changes in streamline orientation can affect system accuracy if the variability is random. 4. Errors relating to signal resolution are much larger for a single threshold detection scheme than for multiple threshold schemes. This report provides methods for computing the effect of various conditions on the accuracy of a record obtained from an AVM. The equipment must be adapted to the site. Field reconnaissance and preinstallation analysis to detect possible problems are critical for proper installation and operation of an AVM system.

  15. Direct reading inductance meter

    NASA Technical Reports Server (NTRS)

    Kolby, R. B. (Inventor)

    1977-01-01

    A direct reading inductance meter comprised of a crystal oscillator and an LC tuned oscillator is presented. The oscillators function respectively to generate a reference frequency, f(r), and to generate an initial frequency, f(0), which when mixed produce a difference equal to zero. Upon connecting an inductor of small unknown value in the LC circuit to change its resonant frequency to f(x), a difference frequency (f(r)-f(x)) is produced that is very nearly a linear function of the inductance of the inductor. The difference frequency is measured and displayed on a linear scale in units of inductance.

  16. Portable wastewater flow meter

    DOEpatents

    Hunter, Robert M.

    1999-02-02

    A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under fill pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

  17. Portable wastewater flow meter

    DOEpatents

    Hunter, Robert M.

    1990-01-01

    A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under full pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

  18. Turbine meters for liquid measurement

    SciTech Connect

    Wass, D.J.; Allen, C.R.

    1995-12-01

    Liquid turbine meters operate in response to fundamental engineering principles, Operation with a single moving part produces excellent longevity and reliability. Liquid turbine meters display wide rangeability, high accuracy, excellent repeatability, low pressure drop and moderate cost. Liquid turbine meters may be applied to many different fluids with different physical properties and corrosive tendencies. The marriage of liquid turbine meters to electronic instruments allows instantaneous flow calculations and produces the flexibility to display data, store data, transmit data in the most convenient form. Liquid turbine meters should be the first flow measurement instrument considered for liquid measurement applications.

  19. Desmethyl Macrolides: Synthesis and Evaluation of 4,8,10-Tridesmethyl Cethromycin

    PubMed Central

    2013-01-01

    Antibiotic-resistant bacteria are emerging at an alarming rate in both hospital and community settings. Motivated by this issue, we have prepared desmethyl (i.e., replacing methyl groups with hydrogens) analogues of third-generation macrolide drugs telithromycin (TEL, 2) and cethromycin (CET, 6), both of which are semisynthetic derivatives of flagship macrolide antibiotic erythromycin (1). Herein, we report the total synthesis, molecular modeling, and biological evaluation of 4,8,10-tridesmethyl cethromycin (7). In MIC assays, CET analogue 7 was found to be equipotent with TEL (2) against a wild-type E. coli strain, more potent than previously disclosed desmethyl TEL congeners 3, 4, and 5, but 4-fold less potent than TEL (2) against a mutant E. coli A2058G strain. PMID:24470840

  20. Plant chlorophyll content meter

    NASA Technical Reports Server (NTRS)

    Spiering, Bruce A. (Inventor); Carter, Gregory A. (Inventor)

    2000-01-01

    A plant chlorophyll content meter is described which collects light reflected from a target plant and separates the collected light into two different wavelength bands. These wavelength bands, or channels, are described as having center wavelengths of 700 nm and 840 nm. The light collected in these two channels are processed using photo detectors and amplifiers. An analog to digital converter is described which provides a digital representation of the level of light collected by the lens and falling within the two channels. A controller provided in the meter device compares the level of light reflected from a target plant with a level of light detected from a light source, such as light reflected by a target having 100% reflectance, or transmitted through a diffusion receptor. The percent of reflection in the two separate wavelength bands from a target plant are compared to provide a ratio which indicates a relative level of plant physiological stress. A method of compensating for electronic drift is described where a sample is taken when a collection lens is covered to prevent light from entering the device. This compensation method allows for a more accurate reading by reducing error contributions due to electronic drift from environmental conditions at the location where a hand-held unit is used.

  1. Advanced metering techniques

    SciTech Connect

    Szydlowski, R.F.

    1993-01-01

    The goal of the US Department of Energy Federal Energy Management Program (FEMP) is to facilitate energy-efficiency improvements at federal facilities. This is accomplished by a balanced program of technology development, facility assessment, and use of cost-sharing procurement mechanisms. Technology development focuses upon the tools and procedures used to identify and evaluate efficiency improvements. For facility assessment, FEMP provides metering equipment and trained analysts to federal agencies exhibiting a commitment to improve energy-use efficiency. To assist in implementing energy-efficiency measures, FEMP helps federal agencies with identifying efficiency opportunities and in implementing energy-efficiency and demand-side management programs at federal sites. As the lead laboratory for FEMP, Pacific Northwest Laboratory (PNL) provides technical assistance to federal agencies to better understand and characterize energy systems. The US Army Forces Command (FORSCOM) has tasked PNL to provide technical assistance to characterize and modernize energy systems at FORSCOM installations. As part of that technical assistance, PNL performed an in-depth examination of automatic meter-reading system technologies currently available. The operating characteristics and relative merits of all the major systems were reviewed in the context of applicability to federal installations. That review is documented in this report.

  2. 10 meter airborne observatory

    NASA Astrophysics Data System (ADS)

    Ditto, Thomas D.; Ritter, Joseph M.

    2008-07-01

    Inside an aircraft fuselage there is little room for the mass of all the instrumentation of a ground-based observatory much less a primary objective aperture at the scale of 10 meters. We have proposed a solution that uses a primary objective grating (POG) which matches the considerable length of the aircraft, approximately 10 meters, and conforms to aircraft aerodynamics. Light collected by the POG is diffracted at an angle of grazing exodus inside the aircraft where it is disambiguated by an optical train that fits within to the interior tunnel. Inside the aircraft, light is focused by a parabolic mirror onto a spectrograph slit. The design has a special benefit in that all objects in the field-of-view of the free spectral range of the POG can have their spectra taken as the aircraft changes orientation. We suggest flight planes that will improve integration times, angular resolution and spectral resolution to acquire targets of high stellar magnitudes or alternatively increase the number of sources acquired per flight at the cost of sensitivity.

  3. Prototype 10-meter radio telescope antenna and mount design

    NASA Technical Reports Server (NTRS)

    Leighton, R. B.

    1976-01-01

    A prototype radio antenna of 10.4 meters diameter and 0.41 meter focal length, intended for use at the shortest radio wavelengths transmitted by the atmosphere, was successfully completed. The surface accuracy is at least four times better than that of any existing antenna in this size class: 50 micrometer rms. A prototype mount is being constructed and will be ready by early 1976. The development of an improved antenna of identical size, but heavier weight has been continued.

  4. GAS METERING PUMP

    DOEpatents

    George, C.M.

    1957-12-31

    A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

  5. Microwave fluid flow meter

    DOEpatents

    Billeter, Thomas R.; Philipp, Lee D.; Schemmel, Richard R.

    1976-01-01

    A microwave fluid flow meter is described utilizing two spaced microwave sensors positioned along a fluid flow path. Each sensor includes a microwave cavity having a frequency of resonance dependent upon the static pressure of the fluid at the sensor locations. The resonant response of each cavity with respect to a variation in pressure of the monitored fluid is represented by a corresponding electrical output which can be calibrated into a direct pressure reading. The pressure drop between sensor locations is then correlated as a measure of fluid velocity. In the preferred embodiment the individual sensor cavities are strategically positioned outside the path of fluid flow and are designed to resonate in two distinct frequency modes yielding a measure of temperature as well as pressure. The temperature response can then be used in correcting for pressure responses of the microwave cavity encountered due to temperature fluctuations.

  6. How to use your peak flow meter

    MedlinePlus

    Peak flow meter - how to use; Asthma - peak flow meter; Reactive airway disease - peak flow meter; Bronchial asthma - peak flow meter ... your airways are narrowed and blocked due to asthma, your peak flow values drop. You can check ...

  7. Fundamental principles of diaphragm meters

    SciTech Connect

    Thomson, J.

    1995-12-01

    A diaphragm meter is a positive displacement instrument which is used to measure the volume of gas that passes through it. This is accomplished through the known volume that is displaced for each stroke of the diaphragm. The diaphragm also provides the seal between the measuring chambers of the device. As such the diaphragm meter has proven to be an accurate and reliable means of measurement of gas for many years. This is especially true at low flow rates because of its positive displacement characteristics. This paper includes a brief history of diaphragm meters, an explanation of the operation of the diaphragm meter, a basic review of the function and design of the positive displacement meter, discusses meter ratings and capacity, and introduces temperature compensation.

  8. 77 FR 40586 - Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-10

    ... 7823 includes numerous stakeholders in the Smart Grid space, particularly customers, Smart Meter... Metering Infrastructure Smart Meter Upgradeability Test Framework; Request for Comments AGENCY: National... Metering Infrastructure Smart Meter Upgradeability Test Framework (Draft NISTIR 7823). This draft...

  9. Established Designs For Advanced Ground Based Astronomical Telescopes In The 1-meter To 4-meter Domain

    NASA Astrophysics Data System (ADS)

    Hull, Anthony B.; Barentine, J.; Legters, S.

    2012-01-01

    The same technology and analytic approaches that led to cost-effective unmitigated successes for the spaceborne Kepler and WISE telescopes are now being applied to meter-class to 4-meter-class ground telescopes, providing affordable solutions to ground astronomy, with advanced features as needed for the application. The range of optical and mechanical performance standards and features that can be supplied for ground astronomy shall be described. Both classical RC designs, as well as unobscured designs are well represented in the IOS design library, allowing heritage designs for both night time and day time operations, the latter even in the proximity of the sun. In addition to discussing this library of mature features, we will also describe a process for working with astronomers early in the definition process to provide the best-value solution. Solutions can include remote operation and astronomical data acquisition and transmission.

  10. Closure Report for Corrective Action Unit 346: Areas 8, 10 Housekeeping Sites, Nevada Test Site, Nevada

    SciTech Connect

    K. B. Campbell

    2003-08-01

    This Closure Report documents the closure activities conducted for Corrective Action Unit (CAU) 346: Areas 8, 10 Housekeeping Sites. CAU 346 is listed in Appendix III of the Federal Facility Agreement and Consent Order (FFACO, 1996) and consists of the following 14 Corrective Action Sites (CASs) located in Areas 8 and 10 of the Nevada Test Site (NTS): (1) CAS 08-22-04: Drums (2); (2) CAS 08-22-11: Drums; Bucket; (3) CAS 08-24-02: Battery; (4) CAS 10-14-01: Transformer; (5) CAS 10-22-06: Drum (Gas Block); (6) CAS 10-22-10: Drum (Gas Block); (7) CAS 10-22-12: Drum (Gas Block); (8) CAS 10-22-13: Drum (Gas Block); (9) CAS 10-22-16: Drum (Gas Block); (10) CAS 10-22-22: Drum; (11) CAS 10-22-25: Drum; (12) CAS 10-22-36: Paint Can; (13) CAS 10-22-37: Gas Block; and (14) CAS 10-24-11: Battery. Closure activities consisted of closing each CAS by removing debris and/or material, disposing of the generated waste, and verifying that each site was clean-closed by visual inspection and/or laboratory analysis of soil verification samples.

  11. Determining gas-meter accuracy

    SciTech Connect

    Valenti, M.

    1997-03-01

    This article describes how engineers at the Metering Research Facility are helping natural-gas companies improve pipeline efficiency by evaluating and refining the instruments used for measuring and setting prices. Accurate metering of natural gas is more important than ever as deregulation subjects pipeline companies to competition. To help improve that accuracy, the Gas Research Institute (GRI) in Chicago has sponsored the Metering Research Facility (MRF) at the Southwest Research Institute (SWRI) in San Antonio, Tex. The MRF evaluates and improves the performance of orifice, turbine, diaphragm, and ultrasonic meters as well as the gas-sampling methods that pipeline companies use to measure the flow of gas and determine its price.

  12. The Metering Guide for Managers.

    ERIC Educational Resources Information Center

    Qayoumi, Mohammed H.

    This volume provides a guide to management of utilities metering in educational facilities, especially colleges and universities. Chapter 1 gives an overview of why utility measurement, specifically the metering of energy consumption, is important in facilities management. Chapter 2 defines the basic units of measurement for both electric and…

  13. Impact of orifice metering uncertainties

    SciTech Connect

    Stuart, J.W. )

    1990-12-01

    In a recent utility study, attributed 38% of its unaccounted-for UAF gas to orifice metering uncertainty biasing caused by straightening vanes. How this was determined and how this applied to the company's orifice meters is described. Almost all (97%) of the company's UAF gas was found to be attributed to identifiable accounting procedures, measurement problems, theft and leakage.

  14. Wavelength meter having elliptical wedge

    DOEpatents

    Hackel, R.P.; Feldman, M.

    1992-12-01

    A wavelength meter is disclosed which can determine the wavelength of a laser beam from a laser source within an accuracy range of two parts in 10[sup 8]. The wavelength meter has wedge having an elliptically shaped face to the optical path of the laser source and includes interferometer plates which form a vacuum housing. 7 figs.

  15. Wavelength meter having elliptical wedge

    DOEpatents

    Hackel, Richard P.; Feldman, Mark

    1992-01-01

    A wavelength meter is disclosed which can determine the wavelength of a laser beam from a laser source within an accuracy range of two parts in 10.sup.8. The wavelength meter has wedge having an elliptically shaped face to the optical path of the laser source and includes interferometer plates which form a vacuum housing.

  16. DISSOLUTION OF PLUTONIUM METAL IN 8-10 M NITRIC ACID

    SciTech Connect

    Rudisill, T. S.; Pierce, R. A.

    2012-07-02

    The H-Canyon facility will be used to dissolve Pu metal for subsequent purification and conversion to plutonium dioxide (PuO{sub 2}) using Phase II of HB-Line. To support the new mission, the development of a Pu metal dissolution flowsheet which utilizes concentrated (8-10 M) nitric acid (HNO{sub 3}) solutions containing potassium fluoride (KF) is required. Dissolution of Pu metal in concentrated HNO{sub 3} is desired to eliminate the need to adjust the solution acidity prior to purification by anion exchange. The preferred flowsheet would use 8-10 M HNO{sub 3}, 0.015-0.07 M KF, and 0.5-1.0 g/L Gd to dissolve the Pu up to 6.75 g/L. An alternate flowsheet would use 8-10 M HNO{sub 3}, 0.05-0.2 M KF, and 1-2 g/L B to dissolve the Pu. The targeted average Pu metal dissolution rate is 20 mg/min-cm{sup 2}, which is sufficient to dissolve a “standard” 2250-g Pu metal button in 24 h. Plutonium metal dissolution rate measurements showed that if Gd is used as the nuclear poison, the optimum dissolution conditions occur in 10 M HNO{sub 3}, 0.04-0.05 M KF, and 0.5-1.0 g/L Gd at 112 to 116 °C (boiling). These conditions will result in an estimated Pu metal dissolution rate of ~11-15 mg/min-cm{sup 2} and will result in dissolution times of 36-48 h for standard buttons. The recommended minimum and maximum KF concentrations are 0.03 M and 0.07 M, respectively. The data also indicate that lower KF concentrations would yield dissolution rates for B comparable to those observed with Gd at the same HNO{sub 3} concentration and dissolution temperature. To confirm that the optimal conditions identified by the dissolution rate measurements can be used to dissolve Pu metal up to 6.75 g/L in the presence of representative concentrations of Fe and Gd or B, a series of experiments was performed to demonstrate the flowsheets. In three of the five experiments, the offgas generation rate during the dissolution was measured and samples were analyzed for hydrogen gas (H{sub 2}). The use of

  17. What's a Peak Flow Meter?

    MedlinePlus

    ... KidsHealth in the Classroom What Other Parents Are Reading Upsetting News Reports? What to Say Vaccines: Which ... the meter reads (this is known as a reading). Repeat three times and note the highest recorded ...

  18. Gamma radiation field intensity meter

    DOEpatents

    Thacker, L.H.

    1994-08-16

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

  19. Gamma radiation field intensity meter

    DOEpatents

    Thacker, Louis H.

    1994-01-01

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

  20. Gamma radiation field intensity meter

    DOEpatents

    Thacker, Louis H.

    1995-01-01

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

  1. Healthcare Energy Metering Guidance (Brochure)

    SciTech Connect

    Not Available

    2011-07-01

    This brochure is intended to help facility and energy managers plan and prioritize investments in energy metering. It offers healthcare-specific examples of metering applications, benefits, and steps that other health systems can reproduce. It reflects collaborative input from the U.S. Department of Energy national laboratories and the health system members of the DOE Hospital Energy Alliance's Benchmarking and Measurement Project Team.

  2. Gamma radiation field intensity meter

    DOEpatents

    Thacker, L.H.

    1995-10-17

    A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

  3. Mass meters for liquid measurement

    SciTech Connect

    Apple, C.

    1995-12-01

    Flowmeters that are capable of providing a direct mass flow measurement include: Coriolis, thermal, gyroscopic and angular momentum. However, Coriolis meters are the only commercially viable device that can cover the breadth of measurements required by the petroleum industry. In addition to providing a direct mass flow measurement, Coriolis meters are extremely accurate, typically {+-}0.1 % to {+-}0.2 %. The advantage of measuring mass is that the mass of a fluid is unaffected by changes in process temperature and pressure. Whereas, volume measurements must be corrected to standard conditions of temperature and pressure for accounting purposes. Although measuring a product on a mass basis would be the simplest approach, most petroleum products are accounted for on a volume basis. This is primarily because only volumetric flowmeters were available prior to the introduction of industrial quality Coriolis meter in the early 1980`s. Due to the lack of means to perform a mass measurement, the petroleum industry has standardized on volume measurement. Systems and procedures are currently in place for performing and verifying volume measurements. Therefore, the petroleum industry will be slow in moving to mass measurement. Coriolis meters are currently gaining acceptance in the petroleum industry for the metering of light hydrocarbons, which are difficult to properly account for on a volume basis. However, due to the many advantages that Coriolis meters provide, they will become a preferred flow measurement device for all areas of petroleum measurement.

  4. Orifice meters for liquid measurement

    SciTech Connect

    Vickrey, R.E.

    1995-12-01

    Orifice meters have been used for centuries in measuring and regulating the flow of water. Historians have recorded the use of orifices by the Romans to regulate the flow of water to houses. Equations used to calculate gas flow rate were originally based on data using water. Although orifice meters are used extensively today by the gas Transmission industry for measuring large quantities of gas in custody transfer, they are also used for the measurement of natural gas liquids such as ethylene, carbon dioxide raw mix, demethanized ethane-propane mix, oil, water, air and steam. An ORIFICE METER consists of a thin flat round plate in which a circular concentric bore with a sharp square edge has been machined and mounted two flanges, each attached to a tube, or an orifice-plate holder with a pressure tap upstream and a pressure tap downstream to provide a means of measuring the pressure drop across the orifice plate. These parts, when assembled as a unit, are the METER and it is called the Primary Element. Occasionally a chart recorder is called a meter but that is not correct. Other instruments used in conjunction with the meter to record or transmit line pressure, differential pressure, temperature, relative density, etc. are the Secondary Elements.

  5. Insert metering plates for gas turbine nozzles

    DOEpatents

    Burdgick, Steven S.; Itzel, Gary; Chopra, Sanjay; Abuaf, Nesim; Correia, Victor H.

    2004-05-11

    The invention comprises a metering plate which is assembled to an impingement insert for use in the nozzle of a gas turbine. The metering plate can have one or more metering holes and is used to balance the cooling flow within the nozzle. A metering plate with multiple holes reduces static pressure variations which result from the cooling airflow through the metering plate. The metering plate can be assembled to the insert before or after the insert is inserted into the nozzle.

  6. Blueprints for the 2003 California History-Social Science Standards Tests for Grades 8, 10, and 11.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    Beginning in 2003, there will be no standardized or norm-referenced test in history-social science for California students. That test is being replaced by assessments at grades 8, 10, and 11 based on California History-Social Science (H-SS) Content Standards. The H-SS standards tests at grades 10 and 11 count for 20% of the Academic Performance…

  7. BACKGROUND MATERIALS FOR WATERSHED CENTRAL DEVELOPMENT WORKSHOP HELD JANUARY 8-10, 2007, IN ATLANTA, GEORGIA (CD)

    EPA Science Inventory

    A development workshop for Watershed Central was held in Atlanta, Georgia, January 8-10, 2007. Participants in the workshop included representatives of EPA’s Office of Water, Office of Environmental Information, Office of Research and Development, and several Regional Offices. ...

  8. A Taste of China: A Series of Lessons for the Gifted/Talented 8-10 Year Old Student.

    ERIC Educational Resources Information Center

    Mitchell, Bruce M.; And Others

    The document provides three lesson plans designed to introduce gifted children (8-10 years old) to a study of China. The plans are built around three stories which portray specific conditions of the Country; the plans are designed to develop specific understandings related to economic conditions caused by floods and droughts, the potential menaces…

  9. Computational physics and applied mathematics capability review June 8-10, 2010

    SciTech Connect

    Lee, Stephen R

    2010-01-01

    differential equations (broadly defined) in a variety of settings, including particle transport, solvers, and plasma physics. Theme 3: Monte Carlo - Monte Carlo was invented at Los Alamos. This theme discusses these vitally important methods and their application in everything from particle transport, to condensed matter theory, to biology. Theme 4: Molecular Dynamics - This theme describes the widespread use of molecular dynamics for a variety of important applications, including nuclear energy, materials science, and biological modeling. Theme 5: Discrete Event Simulation - The technical scope of this theme represents a class of complex system evolutions governed by the action of discrete events. Examples include network, communication, vehicle traffic, and epidemiology modeling. Theme 6: Integrated Codes - This theme discusses integrated applications (comprised of all of the supporting science represented in Themes 1-5) that are of strategic importance to the Laboratory and the nation. The Laboratory has in approximately 10 million source lines of code in over 100 different such strategically important applications. Of these themes, four of them will be reviewed during the 2010 review cycle: Themes 1,2, 3, and 6. Because these reviews occur every three years, Themes 4 and 5 will be reviewed in 2013, along with Theme 6 (which will be reviewed during each review, owing to this theme's role as an integrator of the supporting science represented by the other five themes). Yearly written status reports will be provided to the CPAM Committee Chair during off-cycle years.

  10. LINEAR COUNT-RATE METER

    DOEpatents

    Henry, J.J.

    1961-09-01

    A linear count-rate meter is designed to provide a highly linear output while receiving counting rates from one cycle per second to 100,000 cycles per second. Input pulses enter a linear discriminator and then are fed to a trigger circuit which produces positive pulses of uniform width and amplitude. The trigger circuit is connected to a one-shot multivibrator. The multivibrator output pulses have a selected width. Feedback means are provided for preventing transistor saturation in the multivibrator which improves the rise and decay times of the output pulses. The multivibrator is connected to a diode-switched, constant current metering circuit. A selected constant current is switched to an averaging circuit for each pulse received, and for a time determined by the received pulse width. The average output meter current is proportional to the product of the counting rate, the constant current, and the multivibrator output pulse width.

  11. Low Cost Digital Vibration Meter

    PubMed Central

    Payne, W. Vance; Geist, Jon

    2007-01-01

    This report describes the development of a low cost, digital Micro Electro Mechanical System (MEMS) vibration meter that reports an approximation to the RMS acceleration of the vibration to which the vibration meter is subjected. The major mechanical element of this vibration meter is a cantilever beam, which is on the order of 500 µm in length, with a piezoresistor deposited at its base. Vibration of the device in the plane perpendicular to the cantilever beam causes it to bend, which produces a measurable change in the resistance of a piezoresistor. These changes in resistance along with a unique signal-processing scheme are used to determine an approximation to the RMS acceleration sensed by the device. PMID:27110459

  12. Arduino based radiation survey meter

    NASA Astrophysics Data System (ADS)

    Rahman, Nur Aira Abd; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Muzakkir, Amir; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee

    2016-01-01

    This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr-1). Conversion factor (CF) value for conversion of CPM to μSvhr-1 determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr.

  13. Plume temperature emitted from metered dose inhalers.

    PubMed

    Brambilla, G; Church, T; Lewis, D; Meakin, B

    2011-02-28

    The temperature of the drug cloud emitted from a pressurised metered dose inhaler (pMDI) may result in patient discomfort and inconsistent or non-existent dose delivery to the lungs. The effects of variations in formulation (drug, propellant, co-solvent content) and device hardware (metering volume, actuator orifice diameter, add-on devices) upon the temperature of pMDI plumes, expressed as replicate mean minimum values (MMPT), collected into a pharmacopoeial dose unit sampling apparatus (DUSA), have been investigated. Ten commercially available and two development products, including chlorofluorocarbon (CFC) suspensions and hydrofluoroalkane (HFA) solutions or suspensions, were examined together with a number of drug products in late stage development and a variety of HFA 134a placebo pMDIs. Plume temperatures were observed to be lowest in the proximity of the product's actuator mouthpiece where rapid flashing and evaporation of the formulation's propellant and volatile excipients cause cooling. The ability to control plume temperature by judicious choice of formulation co-solvent content, metering volume and the actuator orifice diameter is identified. An ethanol based HFA 134a formulation delivered through a fine orifice is inherently warmer than one with 100% HFA 134a vehicle delivered through a coarse actuator orifice. Of the 10 commercial products evaluated, MMPTs ranged from -54 to +4°C and followed the formulation class rank order, HFA suspensions

  14. Adsorption of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) on a soil organic matter. A DFT M05 computational study.

    PubMed

    Sviatenko, Liudmyla K; Gorb, Leonid; Shukla, Manoj K; Seiter, Jennifer M; Leszczynska, Danuta; Leszczynski, Jerzy

    2016-04-01

    Adsorption of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) by soil organic matter considering the Leonardite Humic Acid (LHA) model at the M05/tzvp level of Density Functional Theory (DFT) applying cluster approximation has been investigated. Different orientations of CL-20 toward LHA surface were examined. It was found that deprotonation of LHA is required to obtain stable complexes with CL-20. Hydrogen bonds between CL-20 and deprotonated LHA were analyzed applying the atoms in molecules (AIM) theory. An attachment or removal of an electron with respect to the complex does not have significant effect on mutual orientation of the adsorbent in complexes. It was shown that adsorbed CL-20 does not undergo redox transformation and, therefore, adsorption on soil organic matter may be responsible for decrease of the degradation rate of CL-20 in soil.

  15. Adsorption of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) on a soil organic matter. A DFT M05 computational study.

    PubMed

    Sviatenko, Liudmyla K; Gorb, Leonid; Shukla, Manoj K; Seiter, Jennifer M; Leszczynska, Danuta; Leszczynski, Jerzy

    2016-04-01

    Adsorption of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) by soil organic matter considering the Leonardite Humic Acid (LHA) model at the M05/tzvp level of Density Functional Theory (DFT) applying cluster approximation has been investigated. Different orientations of CL-20 toward LHA surface were examined. It was found that deprotonation of LHA is required to obtain stable complexes with CL-20. Hydrogen bonds between CL-20 and deprotonated LHA were analyzed applying the atoms in molecules (AIM) theory. An attachment or removal of an electron with respect to the complex does not have significant effect on mutual orientation of the adsorbent in complexes. It was shown that adsorbed CL-20 does not undergo redox transformation and, therefore, adsorption on soil organic matter may be responsible for decrease of the degradation rate of CL-20 in soil. PMID:26814703

  16. Seepage meters and Bernoulli's revenge

    USGS Publications Warehouse

    Shinn, E.A.; Reich, C.D.; Hickey, T.D.

    2002-01-01

    Evaluation of seepage data from a network of 50 permanently deployed submarine seepage meters, specially constructed from fiberglass, indicates that the devices artificially advect (Bernoulli effect) shallow ground water. Reverse flow into the rock was not observed even when adjacent piezometers installed 2-m to 20-m below the rock-water interface indicated negative groundwater heads. Quantitative testing of five different designs, including conventional end-of-oil-drum designs, indicates that meters presenting positive relief on the sea floor are subject to the Bernoulli effect when placed in areas where there are waves and/or currents. Advection does not appear to be caused by flexing of the collection bags.

  17. Direct-reading inductance meter

    NASA Technical Reports Server (NTRS)

    Kolbly, R. B.

    1977-01-01

    Meter indicates from 30 nH to 3 micro H. Reference inductor of 15 micro H is made by winding 50 turns of Number 26 Formvar wire on Micrometal type 50-2 (or equivalent) core. Circuit eliminates requirement for complex instrument compensation prior to taking coil inductance measurement and thus is as easy to operate as common ohmmeter.

  18. A Redesigned DFA Moisture Meter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The DFA moisture meter has been internationally recognized as the standard for determining moisture content of dried fruit in general and is AOAC Official Method 972.2 for measuring moisture in prunes and raisins since 1972. The device has remained virtually unchanged since its inception, with its o...

  19. Federal Building Metering Guidance (per 42 U.S.C. 8253(e), Metering of Energy Use)

    SciTech Connect

    2014-11-01

    Guidance defines which federal buildings are appropriate to meter, provides metering prioritization recommendations for agencies with limited resources, and discusses the requirement for agencies to submit metering implementation plans to the U.S. Department of Energy.

  20. Government Program Briefing: Smart Metering

    SciTech Connect

    Doris, E.; Peterson, K.

    2011-09-01

    This document is adapted and updated from a memo delivered to the City Council of New Orleans, the office of the Mayor of New Orleans, the Chairperson of the Citizen Stakeholders Group (New Orleans Energy Task Force) and the U.S. Department of Energy (DOE) Project Officer in March 2008. This briefing piece provides an overview of the benefits, costs, and challenges of smart metering.

  1. A color sensor wavelength meter

    NASA Astrophysics Data System (ADS)

    Durfee, Dallin; Jackson, Jarom; Otterstrom, Nils; Jones, Tyler; Archibald, James

    2016-05-01

    We will discuss a laser wavelength meter based on a commercial color sensor chip consisting of an array of photodiodes with different absorptive color filters. By comparing the relative amplitudes of light on the photodiodes, the wavelength of light can be determined with picometer-level precision and with picometer-scale calibration drift over a period longer than a month. This work was supported by NSF Grant Number PHY-1205736.

  2. The crystal structure and morphology of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) p-xylene solvate: a joint experimental and simulation study.

    PubMed

    Shen, Fanfan; Lv, Penghao; Sun, Chenghui; Zhang, Rubo; Pang, Siping

    2014-01-01

    The crystal structure of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaiso-wurtzitane (CL-20) p-xylene solvate, and the solvent effects on the crystal faces of CL-20 were studied through a combined experimental and theoretical method. The properties were analyzed by thermogravimetry-differential scanning calorimetry (TG-DSC), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD).The growth morphology of CL-20p-xylene solvate crystal was predicted with a modified attachment energy model. The crystal structure of CL-20p-xylene solvate belonged to the Pbca space group with the unit cell parameters, a=8.0704(12) Å, b=13.4095(20) Å, c=33.0817(49) Å, and Z=4, which indicated that the p-xylene solvent molecules could enter the crystal lattice of CL-20 and thus the CL-20 p-xylene solvate is formed. According to the solvent-effected attachment energy calculations, (002) and (11-1) faces should not be visible at all, while the percentage area of the (011) face could be increased from 7.81% in vacuum to 12.51% in p-xylene solution. The predicted results from the modified attachment energy model agreed very well with the observed morphology of crystals grown from p-xylene solution. PMID:25401400

  3. Laser operations at the 8-10m class telescopes Gemini, Keck, and the VLT: lessons learned, old and new challenges

    NASA Astrophysics Data System (ADS)

    Amico, Paola; Campbell, Randall D.; Christou, Julian C.

    2010-07-01

    Laser Guide Star (LGS) assisted Adaptive Optics routine operations have commenced at three of the major astronomical observatories, in 2004 (Keck) and 2006 (VLT and Gemini) respectively. Subaru is also on the verge of putting its LGS facility into operations. In this paper we concentrate on the operational aspect of the laser facilities: we discuss common problems such as weather constraints, beam collisions, aircraft avoidance and optimal telescope scheduling. We highlight important differences between the observatories, especially in view of the valuable lessons learnt. While it is true that the three observatories have made quick progress and achieved important scientific results during the first years of operations, there is much room left for improvement in terms of the efficiency that can be obtained on sky. We compare and contrast the more recently implemented LGS systems of VLT and Gemini operated in service and queue modes to the more mature LGS operation at Keck that employs classical PI scheduled observing.

  4. 1-Meter Digital Elevation Model specification

    USGS Publications Warehouse

    Arundel, Samantha T.; Archuleta, Christy-Ann M.; Phillips, Lori A.; Roche, Brittany L.; Constance, Eric W.

    2015-10-21

    In January 2015, the U.S. Geological Survey National Geospatial Technical Operations Center began producing the 1-Meter Digital Elevation Model data product. This new product was developed to provide high resolution bare-earth digital elevation models from light detection and ranging (lidar) elevation data and other elevation data collected over the conterminous United States (lower 48 States), Hawaii, and potentially Alaska and the U.S. territories. The 1-Meter Digital Elevation Model consists of hydroflattened, topographic bare-earth raster digital elevation models, with a 1-meter x 1-meter cell size, and is available in 10,000-meter x 10,000-meter square blocks with a 6-meter overlap. This report details the specifications required for the production of the 1-Meter Digital Elevation Model.

  5. 1-Meter Digital Elevation Model specification

    USGS Publications Warehouse

    Arundel, Samantha T.; Archuleta, Christy-Ann M.; Phillips, Lori A.; Roche, Brittany L.; Constance, Eric W.

    2015-01-01

    In January 2015, the U.S. Geological Survey National Geospatial Technical Operations Center began producing the 1-Meter Digital Elevation Model data product. This new product was developed to provide high resolution bare-earth digital elevation models from light detection and ranging (lidar) elevation data and other elevation data collected over the conterminous United States (lower 48 States), Hawaii, and potentially Alaska and the U.S. territories. The 1-Meter Digital Elevation Model consists of hydroflattened, topographic bare-earth raster digital elevation models, with a 1-meter x 1-meter cell size, and is available in 10,000-meter x 10,000-meter square blocks with a 6-meter overlap. This report details the specifications required for the production of the 1-Meter Digital Elevation Model.

  6. Pitch and Time, Tonality and Meter: How Do Musical Dimensions Combine?

    ERIC Educational Resources Information Center

    Prince, Jon B.; Thompson, William F.; Schmuckler, Mark A.

    2009-01-01

    The authors examined how the structural attributes of tonality and meter influence musical pitch-time relations. Listeners heard a musical context followed by probe events that varied in pitch class and temporal position. Tonal and metric hierarchies contributed additively to the goodness-of-fit of probes, with pitch class exerting a stronger…

  7. 10 CFR 451.7 - Metering requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Metering requirements. 451.7 Section 451.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.7 Metering requirements... renewable energy facility must be measured by a standard metering device that— (a) Meets generally...

  8. 10 CFR 451.7 - Metering requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Metering requirements. 451.7 Section 451.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.7 Metering requirements... renewable energy facility must be measured by a standard metering device that— (a) Meets generally...

  9. 10 CFR 451.7 - Metering requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Metering requirements. 451.7 Section 451.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.7 Metering requirements... renewable energy facility must be measured by a standard metering device that— (a) Meets generally...

  10. MTI compact electronic meter testing program

    SciTech Connect

    O`Rourke, E.L.

    1995-12-31

    MTI has completed an extensive test program to ensure a new compact electronic gas meter meets all specifications and standards customarily employed by the U.S. gas industry. Thirty (30) test plans were developed to cover all American National Standards Institute (ANSI) performance requirements. (1) The prototype meters have met or exceeded the ANSI B109.1 standards. (2) The prototype meters have demonstrated the feasibility of GRI`s decision to seek a compact meter for early market entry. (3) Several leading U.S. utilities have participated in sponsoring the project and have expressed keen interest in field testing the compact meter. (4) American Meter Company (AMC), the predominant U.S. meter manufacturer, has participated in the sponsorship and testing of the compact meter and has formed a joint venture with Select Corporation to bring the meter to the U.S. and world-wide marketplace. (5) The meter generates the necessary electronic output for either telephonic or radio based automatic meter reading (AMR). The pre-production meters for the North American market are being fabricated currently by AMC. Following their completion, an extensive field test program will take place. Three hundred units will be installed at ten to fifteen utilities and tested for a period of up to one year.

  11. Embedded solution for a microwave moisture meter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In this paper, the conversion of a PC or laptop-controlled microwave moisture meter to a stand-alone meter hosting its own embedded system is discussed. The moisture meter is based on the free-space transmission measurement technique and uses low-intensity microwaves to measure the attenuation and p...

  12. RF-source resistance meters

    NASA Technical Reports Server (NTRS)

    Oakley, E. C. (Inventor)

    1973-01-01

    Several embodiments of RF source resistance measuring devices are disclosed. Common to all embodiments in the feature of the inclusion of at least one variable resistor, and a peak readout meter. In one embodiment, two ganged unloaded potentiometers are employed while another embodiment comprises an automaticnulling RF power bridge circuit with a variable rather than a fixed bridge reference resistance. A third embodiment comprises a calorimeter with a varible rather than a fixed resistor, while in another embodiment attenuator pads with variable resistors are employed.

  13. How Coriolis meter design affects field performance

    SciTech Connect

    Levien, A.; Dudiak, A.

    1995-12-31

    Although many possibilities exist for the design of Coriolis flowmeters, a common set of fundamental physical principles affect practical meter design. Design criteria such as tube geometry, alloy section, operating frequencies, stress levels, and tubing wall thickness have varying impacts on meter performance. Additionally, field conditions such as changing temperature, pressure, pipeline stress and vibration affect measurement performance. The challenge created in Coriolis flow meter design is to maximize the sensitivity of the meter Coriolis forces, while minimizing the impact of outside environmental influences. Data are presented on the physical principles that affect Coriolis flowmeters, and how the various aspects of meter design influence field performance.

  14. Global climate change and international security. Report on a conference held at Argonne National Laboratory, May 8--10, 1991

    SciTech Connect

    Rice, M.

    1991-12-31

    On May 8--10, 1991, the Midwest Consortium of International Security Studies (MCISS) and Argonne National Laboratory cosponsored a conference on Global Climate Change and International Security. The aim was to bring together natural and social scientists to examine the economic, sociopolitical, and security implications of the climate changes predicted by the general circulation models developed by natural scientists. Five themes emerged from the papers and discussions: (1) general circulation models and predicted climate change; (2) the effects of climate change on agriculture, especially in the Third World; (3) economic implications of policies to reduce greenhouse gas emissions; (4) the sociopolitical consequences of climate change; and (5) the effect of climate change on global security.

  15. Choose the right flow meter

    SciTech Connect

    Dolenc, J.W.

    1996-01-01

    Flow measurement is distinguished from other measurements by the large number of viable technologies available. Many flow meter selection guides have been published, all of which come to the same basic conclusions: choice depends upon the purpose of the measurement, the value of the fluid being measured, its physical characteristics, and installation constrains associated with the location of the meter. When selecting a flow measurement technology for any application, seven key questions must be answered: (1) What is being measured? (2) Why is the particular measurement being made? (3) What is the value of the fluid? (4) What are the physical properties of the fluid at the point of measurement? (5) What materials of construction are acceptable? (6) What are the installation constraints? and (7) What are the track records of the various technologies in this application? Finally, after these questions are answered, performance vs. cost can be judged. This judgment can be made via a formal procedure with written documentation or, for an experienced engineer, based on an information analysis utilizing accumulated knowledge or preferences.

  16. Prognostic Significance of Neuroendocrine Differentiation in Patients With Gleason Score 8-10 Prostate Cancer Treated With Primary Radiotherapy

    SciTech Connect

    Krauss, Daniel J.; Hayek, Sylvia; Amin, Mitual; Ye Hong; Kestin, Larry L.; Zadora, Steven; Vicini, Frank A.; Cotant, Matthew; Brabbins, Donald S.; Ghilezan, Michel I.; Gustafson, Gary S.; Martinez, Alvaro A.

    2011-11-01

    Purpose: To determine the prognostic significance of neuroendocrine differentiation (NED) in Gleason score 8-10 prostate cancer treated with primary radiotherapy (RT). Methods and Materials: Chromogranin A (CgA) staining was performed and overseen by a single pathologist on core biopsies from 176 patients from the William Beaumont prostate cancer database. A total of 143 had evaluable biopsy material. Staining was quantified as 0%, <1%, 1-10%, or >10% of tumor cells. Patients received external beam RT alone or together with high-dose-rate brachytherapy. Cox regression and Kaplan-Meier estimates determined if the presence/frequency of neuroendocrine cells correlated with clinical endpoints. Results: Median follow-up was 5.5 years. Forty patients (28%) had at least focal positive CgA staining (<1% n = 21, 1-10% n = 11, >10% n = 8). No significant differences existed between patients with or without staining in terms of age, pretreatment prostate-specific antigen, tumor stage, hormone therapy administration, % biopsy core involvement, mean Gleason score, or RT dose/modality. CgA staining concentration independently predicted for biochemical and clinical failure, distant metastases (DM), and cause-specific survival (CSS). For patients with <1% vs. >1% staining, 10-year DM rates were 13.4% vs. 55.3%, respectively (p = 0.001), and CSS was 91.7% vs. 58.9% (p < 0.001). As a continuous variable, increasing CgA staining concentration predicted for inferior rates of DM, CSS, biochemical control, and any clinical failure. No differences in outcomes were appreciated for patients with 0% vs. <1% NED. Conclusions: For Gleason score 8-10 prostate cancer, >1% NED is associated with inferior clinical outcomes for patients treated with radiotherapy. This relates most directly to an increase in distant disease failure.

  17. Discussion series on PURPA related topics: metering

    SciTech Connect

    Sturgeon, J I

    1980-08-01

    Time-differentiated metering of electricity consumption and demand is required in both rate-structure experimentation and the implementation of most time-of-use rate designs. Time-differentiated metering takes three major forms: multi-register watthour meters, magnetic-tape recording meters, and remote automatic meter-reading systems. The majority of projects selected magnetic-tape meters for their flexibility with respect to rate structure, load-survey capabilities, and ready availability. The small-scale, experimental nature of the projects reduced the significance of the large difference in per-unit cost and operational/maintenance complexity between this form of metering and the multi-register form. Magnetic-tape meters are not likely candidates for system-wide implementation of time-differentiated metering. Automatic remote-meter-reading systems were not adequately available during the project years; those projects attempting to use these were unable to bring them to full operational status before project termination, due to the many problems of design, quality control, and equipment acquisition encountered. Delays in acquisition and problems of quality control also followed the selection of magnetic-tape meters and multi-register meters by a number of the projects. Though less complex than automatic remote-reading systems, these technologies are still new and more complex than standard watthour metering. Thus, both equipment vendors and utilities encountered numerous problems in getting properly functioning meters to the service entrances on time. A variety of factors contributed to installation delays, including unforeseen space limitations, incompatible wiring, problems of task organization, and customer reluctance.

  18. The Thirty Meter Telescope (TMT): An International Observatory

    NASA Astrophysics Data System (ADS)

    Sanders, Gary H.

    2013-06-01

    The Thirty Meter Telescope (TMT) will be the first truly global ground-based optical/infrared observatory. It will initiate the era of extremely large (30-meter class) telescopes with diffraction limited performance from its vantage point in the northern hemisphere on Mauna Kea, Hawaii, USA. The astronomy communities of India, Canada, China, Japan and the USA are shaping its science goals, suite of instrumentation and the system design of the TMT observatory. With large and open Nasmyth-focus platforms for generations of science instruments, TMT will have the versatility and flexibility for its envisioned 50 years of forefront astronomy. The TMT design employs the filled-aperture finely-segmented primary mirror technology pioneered with the W.M. Keck 10-meter telescopes. With TMT's 492 segments optically phased, and by employing laser guide star assisted multi-conjugate adaptive optics, TMT will achieve the full diffraction limited performance of its 30-meter aperture, enabling unprecedented wide field imaging and multi-object spectroscopy. The TMT project is a global effort of its partners with all partners contributing to the design, technology development, construction and scientific use of the observatory. TMT will extend astronomy with extremely large telescopes to all of its global communities.

  19. Infants use meter to categorize rhythms and melodies: implications for musical structure learning.

    PubMed

    Hannon, Erin E; Johnson, Scott P

    2005-06-01

    Little is known about whether infants perceive meter, the underlying temporal structure of music. We employed a habituation paradigm to examine whether 7-month-old infants could categorize rhythmic and melodic patterns on the basis of the underlying meter, which was implied from event and accent frequency of occurrence. In Experiment 1, infants discriminated duple and triple classes of rhythm on the basis of implied meter. Experiment 2 replicated this result while controlling for rhythmic grouping structure, confirming that infants perceived metrical structure despite occasional ambiguities and conflicting group structure. In Experiment 3, infants categorized melodies on the basis of contingencies between metrical position and pitch. Infants presented with metrical melodies detected reversals of pitch/meter contingencies, while infants presented with non-metrical melodies showed no preference. Results indicate that infants can infer meter from rhythmic patterns, and that they may use this metrical structure to bootstrap their knowledge acquisition in music learning.

  20. 40 CFR 721.10025 - 10H-Phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... C8-10-branched alkyl) derivs. 721.10025 Section 721.10025 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified as 10H-phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  1. 40 CFR 721.10025 - 10H-Phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... C8-10-branched alkyl) derivs. 721.10025 Section 721.10025 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified as 10H-phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  2. 40 CFR 721.10022 - Benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... C8-10-branched alkyl) derivs. 721.10022 Section 721.10022 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  3. 40 CFR 721.10022 - Benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... C8-10-branched alkyl) derivs. 721.10022 Section 721.10022 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  4. 40 CFR 721.10025 - 10H-Phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... C8-10-branched alkyl) derivs. 721.10025 Section 721.10025 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified as 10H-phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  5. 40 CFR 721.10025 - 10H-Phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... C8-10-branched alkyl) derivs. 721.10025 Section 721.10025 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified as 10H-phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  6. 40 CFR 721.10022 - Benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... C8-10-branched alkyl) derivs. 721.10022 Section 721.10022 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  7. 40 CFR 721.10022 - Benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... C8-10-branched alkyl) derivs. 721.10022 Section 721.10022 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  8. 40 CFR 721.10023 - Benzenamine, N-phenyl-, ar ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-rich C8-10-branched alkyl) derivs. 721.10023 Section 721.10023 Protection of Environment ENVIRONMENTAL...-10-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar,ar′-(C9-rich C8-10-branched...

  9. 40 CFR 721.10023 - Benzenamine, N-phenyl-, ar ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-rich C8-10-branched alkyl) derivs. 721.10023 Section 721.10023 Protection of Environment ENVIRONMENTAL...-10-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar,ar′-(C9-rich C8-10-branched...

  10. 40 CFR 721.10023 - Benzenamine, N-phenyl-, ar ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-rich C8-10-branched alkyl) derivs. 721.10023 Section 721.10023 Protection of Environment ENVIRONMENTAL...-10-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar,ar′-(C9-rich C8-10-branched...

  11. 40 CFR 721.10025 - 10H-Phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... C8-10-branched alkyl) derivs. 721.10025 Section 721.10025 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified as 10H-phenothiazine, ar, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  12. 40 CFR 721.10022 - Benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... C8-10-branched alkyl) derivs. 721.10022 Section 721.10022 Protection of Environment ENVIRONMENTAL...-branched alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as benzenamine, N-phenyl-, ar′-(C9-rich C8-10-branched alkyl) derivs (PMN...

  13. Compact gas meter development shows promise

    SciTech Connect

    Norman, R.S.

    1995-07-01

    In the mid-1980s, the Gas Research Institute (GRI) surveyed the needs of the natural gas industry to determine where improved operations technology would assist the industry in the residential gas market. A compact gas meter was identified as an advance in the metering area which would be beneficial for future growth of natural gas usage, especially in the multi-family construction area. GRI currently is pursuing development of a compact diaphragm meter and evaluating several advanced electronic meters for future use in the US. Overall benefits to the natural gas distribution industry will be: greater installation flexibility for a smaller meter; easier integration with automatic meter reading equipment; lower total installation costs including meter, meter supports, and regulator; better appearance in confined, exterior installations. Smaller gas meters will become a viable option for gas companies, builders, and contractors i the near future and will enhance gas energy use for many residential and commercial buildings within the next five years. GRI`s overall goal is to have 50,000 compact gas meters installed in the US by the end of 1997.

  14. Inherent limitations of nondestructive chlorophyll meters: a comparison of two types of meters

    NASA Technical Reports Server (NTRS)

    Monje, O. A.; Bugbee, B.

    1992-01-01

    Two types of nondestructive chlorophyll meters were compared with a standard, destructive chlorophyll measurement technique. The nondestructive chlorophyll meters were 1) a custom built, single-wavelength meter, and 2) the recently introduced, dual-wavelengh, chlorophyll meter from Minolta (model SPAD-502). Data from both meters were closely correlated with destructive measurements of chlorophyll (r2 = 0.90 and 0.93; respectively) for leaves with chlorophyll concentrations ranging from 100 to 600 mg m-2, but both meters consistently overestimated chlorophyll outside this range. Although the dual-wavelength meter was slightly more accurate than the single-wavelength meter (higher r2), the light-scattering properties of leaf cells and the nonhomogeneous distribution of chlorophyll in leaves appear to limit the ability of all meters to estimate in vivo chlorophyll concentration.

  15. An 8 Meter Monolithic UV/Optical Space Telescope

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip; Postman, Marc

    2008-01-01

    The planned Ares V launch vehicle with its 10 meter fairing and at least 55,600 kg capacity to Earth Sun L2 enables entirely new classes of space telescopes. A consortium from NASA, Space Telescope Science Institute, and aerospace industry are studying an 8-meter monolithic primary mirror UV/optical/NIR space telescope to enable new astrophysical research that is not feasible with existing or near-term missions, either space or ground. This paper briefly reviews the science case for such a mission and presents the results of an on-going technical feasibility study, including: optical design; structural design/analysis including primary mirror support structure, sun shade and secondary mirror support structure; thermal analysis; launch vehicle performance and trajectory; spacecraft including structure, propulsion, GN&C, avionics, power systems and reaction wheels; operations & servicing; mass budget and cost.

  16. "Racializing" Class

    ERIC Educational Resources Information Center

    Hatt-Echeverria, Beth; Urrieta, Luis, Jr.

    2003-01-01

    In an effort to explore how racial and class oppressions intersect, the authors use their autobiographical narratives to depict cultural and experiential continuity and discontinuity in growing up white working class versus Chicano working class. They specifically focus on "racializing class" due to the ways class is often used as a copout by…

  17. Model Performance of Water-Current Meters

    USGS Publications Warehouse

    Fulford, J.M.; ,

    2002-01-01

    The measurement of discharge in natural streams requires hydrographers to use accurate water-current meters that have consistent performance among meters of the same model. This paper presents the results of an investigation into the performance of four models of current meters - Price type-AA, Price pygmy, Marsh McBirney 2000 and Swoffer 2100. Tests for consistency and accuracy for six meters of each model are summarized. Variation of meter performance within a model is used as an indicator of consistency, and percent velocity error that is computed from a measured reference velocity is used as an indicator of meter accuracy. Velocities measured by each meter are also compared to the manufacturer's published or advertised accuracy limits. For the meters tested, the Price models werer found to be more accurate and consistent over the range of test velocities compared to the other models. The Marsh McBirney model usually measured within its accuracy specification. The Swoffer meters did not meet the stringent Swoffer accuracy limits for all the velocities tested.

  18. Off-level corrections for gravity meters

    NASA Astrophysics Data System (ADS)

    Niebauer, T. M.; Blitz, Thomas; Constantino, Andy

    2016-04-01

    Gravity meters must be aligned with the local gravity at any location on the surface of the earth in order to measure the full amplitude of the gravity vector. The gravitational force on the sensitive component of the gravity meter decreases by the cosine of the angle between the measurement axis and the local gravity vector. Most gravity meters incorporate two horizontal orthogonal levels to orient the gravity meter for a maximum gravity reading. In order to calculate a gravity correction it is often necessary to estimate the overall angular deviation between the gravity meter and the local gravity vector using two measured horizontal tilt meters. Typically this is done assuming that the two horizontal angles are independent and that the product of the cosines of the horizontal tilts is equivalent to the cosine of the overall deviation. These approximations, however, break down at large angles. This paper derives analytic formulae to transform angles measured by two orthogonal tilt meters into the vertical deviation of the third orthogonal axis. The equations can be used to calibrate the tilt sensors attached to the gravity meter or provide a correction for a gravity meter used in an off-of-level condition.

  19. New gravity meter improves measurements

    NASA Astrophysics Data System (ADS)

    Carter, W. E.; Peter, G.; Sasagawa, G. S.; Klopping, F. J.; Berstis, K. A.; Hilt, R. L.; Christy, G. L.; Nelson, P.; Hollander, W.; Niebauer, T. M.; Seeger, H.; Richter, B.; Wilmes, H.; Lothammer, A.

    One of the best-known anecdotes in the history of science recounts how the observation of an apple falling from a tree led Isaac Newton to discover the law of gravitation. For good reason, Newton's discovery did not trigger the development of “free-fall” gravity meters and grand expeditions to the far corners of the Earth to measure gravity. Directly measuring the acceleration of a body in free fall near the surface of the Earth may be conceptually simple, but it is technologically difficult. It wasn't until more than 2 centuries later that time and length measurement techniques reached levels that motivated researchers to build free-fall absolute gravimeters. These efforts were limited to the construction of one-of-a-kind “laboratory” instruments, minus one notable exception: the construction of six identical absolute gravimeters by the Joint Institute for Laboratory Astrophysics (JILA) [Niebauer, 1987a]. Geodetic organizations worldwide used the JILA instruments to measure gravity at more than one hundred stations achieving repeatability or precision of a few microgals (1 μGal equals l×10-8ms-2).

  20. High Power SiGe X-Band (8-10 GHz) Heterojunction Bipolar Transistors and Amplifiers

    NASA Technical Reports Server (NTRS)

    Ma, Zhenqiang; Jiang, Ningyue; Ponchak, George E.; Alterovitz, Samuel A.

    2005-01-01

    Limited by increased parasitics and thermal effects as the device size becomes large, current commercial SiGe power HBTs are difficult to operate at X-band (8-12 GHz) with adequate power added efficiencies at high power levels. We found that, by changing the heterostructure and doping profile of SiGe HBTs, their power gain can be significantly improved without resorting to substantial lateral scaling. Furthermore, employing a common-base configuration with proper doping profile instead of a common-emitter configuration improves the power gain characteristics of SiGe HBTs, which thus permits these devices to be efficiently operated at X-band. In this paper, we report the results of SiGe power HBTs and MMIC power amplifiers operating at 8-10 GHz. At 10 GHz, 22.5 dBm (178 mW) RF output power with concurrent gain of 7.32 dB is measured at the peak power-added efficiency of 20.0% and the maximum RF output power of 24.0 dBm (250 mW) is achieved from a 20 emitter finger SiGe power HBT. Demonstration of single-stage X-band medium-power linear MMIC power amplifier is also realized at 8 GHz. Employing a 10-emitter finger SiGe HBT and on-chip input and output matching passive components, a linear gain of 9.7 dB, a maximum output power of 23.4 dBm and peak power added efficiency of 16% is achieved from the power amplifier. The MMIC exhibits very low distortion with third order intermodulation (IM) suppression C/I of -13 dBc at output power of 21.2 dBm and over 20dBm third order output intercept point (OIP3).

  1. Remote Observing with the Pomona College 1-meter telescope

    NASA Astrophysics Data System (ADS)

    Penprase, B.

    2005-12-01

    We summarize our operations during the past year with our 1-meter Pomona College telescope located in Wrightwood California at the Table Mountain site . New programs for observing GRB host galaxies, and monitoring open clusters for potential planetary transits are described. The remote observing makes use of the ACE control system, and we summarize the performance and operation of our telescope from its mountain site using campus internet links. During the year the telescope is used extensively in laboratory classes, and we describe some of the curricular impact the facility has had for our students.

  2. Non-CFC metered dose inhalers: the patent landscape.

    PubMed

    Bowman, P A; Greenleaf, D

    1999-09-10

    There have been many patent applications to the European Patent Office over the past decade involving the transition of pressurised metered dose inhalers from the CFCs to non-CFC propellants. In addition to those where formulations are changed, there are those relating to specific drugs or drug classes, processes of manufacture and modifications to the container/closure system. Many of these have been opposed, usually on the grounds of obviousness. However, due to the length of time for the opposition process and the fact that there are few non-CFC pressurised inhalers on the market yet, the complete picture of which patents are valid has yet to unfold.

  3. 40 CFR 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL... the insect pheromone codlure, (E,E)-8,10-dodecadien-1-ol, on all raw agricultural commodities...

  4. 40 CFR 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL... the insect pheromone codlure, (E,E)-8,10-dodecadien-1-ol, on all raw agricultural commodities...

  5. 40 CFR 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL... the insect pheromone codlure, (E,E)-8,10-dodecadien-1-ol, on all raw agricultural commodities...

  6. 40 CFR 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL... the insect pheromone codlure, (E,E)-8,10-dodecadien-1-ol, on all raw agricultural commodities...

  7. 10 CFR 451.7 - Metering requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Metering requirements. 451.7 Section 451.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.7 Metering requirements. The net electric energy generated and sold (kilowatt-hours) by the owner or operator of a...

  8. 10 CFR 451.7 - Metering requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Metering requirements. 451.7 Section 451.7 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.7 Metering requirements. The net electric energy generated and sold (kilowatt-hours) by the owner or operator of a...

  9. Simplified Processing Method for Meter Data Analysis

    SciTech Connect

    Fowler, Kimberly M.; Colotelo, Alison H. A.; Downs, Janelle L.; Ham, Kenneth D.; Henderson, Jordan W.; Montgomery, Sadie A.; Vernon, Christopher R.; Parker, Steven A.

    2015-11-01

    Simple/Quick metered data processing method that can be used for Army Metered Data Management System (MDMS) and Logistics Innovation Agency data, but may also be useful for other large data sets. Intended for large data sets when analyst has little information about the buildings.

  10. Proton recoil scintillator neutron rem meter

    DOEpatents

    Olsher, Richard H.; Seagraves, David T.

    2003-01-01

    A neutron rem meter utilizing proton recoil and thermal neutron scintillators to provide neutron detection and dose measurement. In using both fast scintillators and a thermal neutron scintillator the meter provides a wide range of sensitivity, uniform directional response, and uniform dose response. The scintillators output light to a photomultiplier tube that produces an electrical signal to an external neutron counter.

  11. Physiological correlates to 800 meter running performance.

    PubMed

    Deason, J; Powers, S K; Lawler, J; Ayers, D; Stuart, M K

    1991-12-01

    Much of the previous research efforts aimed at determining those physiological characteristics that contribute to distance running success have centered around distances greater than 1500 meters with little attention to events such as the 800 meter run. Therefore, this investigation examined the relationship between selected physiological and body composition, characteristics and performance in an 800 meter run. Measurements of body composition, VO2max, running economy, and performance times for 100 and 300 meter dashes were obtained on 11 male track athletes. Stepwise multiple regression analysis was performed using 800 meter race time as the dependent variable. Although the combination of 300 and 100 meter run times, percent body fat, running economy and VO2 max as independent variables accounted for the greatest amount of total variance (r2 = .89), the additional variance explained by the model did not increase significantly (p greater than 0.05), when VO2max, percent body fat, and running economy were added to a model which contained 300 and 100 meter run time (r2 = .85) as the explanatory variables. These data offer additional support for the notion that much of the intramuscular ATP produce and utilized during an 800 meter run comes from anaerobic metabolic pathway.

  12. Evaluating Metal Probe Meters for Soil Testing.

    ERIC Educational Resources Information Center

    Hershey, David R.

    1992-01-01

    Inexpensive metal probe meters that are sold by garden stores can be evaluated by students for their accuracy in measuring soil pH, moisture, fertility, and salinity. The author concludes that the meters are inaccurate and cannot be calibrated in standard units. However, the student evaluations are useful in learning the methods of soil analysis…

  13. Proper installation ensures turbine meter accuracy

    SciTech Connect

    Peace, D.W.

    1995-07-01

    Turbine meters are widely used for natural gas measurement and provide high accuracy over large ranges of operation. However, as with many other types of flowmeters, consideration must be given to the design of the turbine meter and the installation piping practice to ensure high-accuracy measurement. National and international standards include guidelines for proper turbine meter installation piping and methods for evaluating the effects of flow disturbances on the design of those meters. Swirl or non-uniform velocity profiles, such as jetting, at the turbine meter inlet can cause undesirable accuracy performance changes. Sources of these types of flow disturbances can be from the installation piping configuration, an upstream regulator, a throttled valve, or a partial blockage upstream of the meter. Test results on the effects of swirl and jetting on different types of meter designs and sizes emphasize the need to consider good engineering design for turbine meters, including integral flow conditioning vanes and adequate installation piping practices for high accuracy measurement.

  14. Metering research facility program: Installation effects on orifice meter performance. Topical report, January 1991-December 1992

    SciTech Connect

    Morrow, T.B.; Park, J.T.

    1993-09-01

    The objective of the report is to acquire orifice discharge coefficient (Cd) data in the Gas Research Institute (GRI) Metering Research Facility (MRF) for various metering configurations typical of field metering installations in the natural gas industry, and to evaluate the effects of using flow conditioning devices to assure proper upstream flow conditions for accurate flow rate measurements.

  15. The effects of meter orientation downstream of a short radius elbow on electromagnetic flow meters

    NASA Astrophysics Data System (ADS)

    Justensen, Jared C.

    Electromagnetic flowmeters (known as magnetic flow meters) are a widely used type of flowmeter. The accuracy of magnetic flow meters are a function of several factors, not the least of which is the flow condition inside the pipe. It has been shown that disturbances in the velocity profile affects the accuracy of a magnetic flow meter (Luntta, 1998). Accordingly, manufacturers of magnetic flow meters give installation guidelines. These guidelines help prevent the user from installing the meter in a pipe configuration that is likely to cause the meter to produce inaccurate results. Although most manufacturers provide recommendations about the amount of straight pipe that is necessary upstream of the meter, little is said about the orientation of the meter in relation to upstream disturbances. This study examines the performance of magnetic flow meters when positioned at two different orientations: EIP (electrodes in plane with an upstream 90-degree short radius elbow) and EOP (electrodes out of plane). Four different meters were included in the study in which a baseline straight pipe test was first performed using over fifty diameters of straight pipe upstream of each meter. The straight pipe test was used to determine the baseline accuracy of each of the meters over a velocity range that is typical for the size and function of the meters. Meters were then installed at five different locations downstream from a 90-degree short-radius elbow. At each location the meters were tested in two orientations at five different flow rates. The intent of the research is to show that the orientation of a magnetic flow meter affects the meter's ability to produce accurate flow readings when it is installed downstream of a flow disturbance. The results from this research showed a significant shift in measurement accuracy when the meter was in EIP and EOP orientations. All of the meters in the study produced accuracy readings at one point of another that were outside the specified

  16. Metering research facility program: Review of field meter provers. Topical report, October 1993-September 1994

    SciTech Connect

    Park, J.T.; Behring, K.A.; Krueger, P.J.

    1995-12-01

    Field meter provers are flowmeters for verification of the performance of field meter stations in the natural gas industry. This report is a review of the current technology for field meter provers at large volume flow rates and high pressure. The review includes a literature review of over 100 documents, an analysis of the prover performance, and a quantitative uncertainty analysis. Field meter provers may either be a permanent installation or a portable device mounted on a truck or trailer. The most viable devices for field proving are the gas piston prover, sonic nozzle, and turbine meter.

  17. Comparable roles of CD44v8-10 and CD44s in the development of bone metastases in a mouse model

    PubMed Central

    Hiraga, Toru; Nakamura, Hiroaki

    2016-01-01

    Cluster of differentiation (CD)44 has been implicated in cancer metastasis to bone. Clinical and experimental studies have suggested that the standard isoform of CD44 (CD44s) and the variant isoform of CD44 (CD44v) enhance metastasis. The present study examined the differential roles of CD44s and CD44v, particularly CD44v8-10, in the development of bone metastases. For this purpose, MDA-MB-231 human breast cancer cells and A549 human lung cancer cells were stably transduced with epithelial splicing regulatory protein 1 (ESRP1), which regulates the alternative splicing of several genes, including CD44. The introduction of ESRP1 induced a splicing switch from CD44s to CD44v, particularly to CD44v8-10, while the total amount of CD44 was rarely affected. However, ESRP1 did not significantly affect cell proliferation, migration, invasion or tumor sphere formation in vitro. Furthermore, ESRP1 did not cause significant differences in the development of bone metastases in a mouse model. As an alternative approach, cancer cells transduced with the CD44v8-10 gene were also established. The overexpression of CD44v8-10 in MCF-7 human breast cancer cells, which rarely express any isoform of CD44, promoted cell migration and sphere formation, whereas the overexpression of CD44v8-10 in MDA-MB-231 cells, which endogenously express high levels of CD44s, did not exert these effects. The results of the present study collectively suggest that the ability of CD44v8-10 to promote tumor aggressiveness and bone metastases is similar to that of CD44s. CD44v8-10 and CD44s may represent potential therapeutic targets for the treatment of bone metastases.

  18. Adaptive Optics for the 8 meter Chinese Giant Solar Telescope

    NASA Astrophysics Data System (ADS)

    Beckers, Jacques; Liu, Zhong; Deng, Yuanyong; Ji, Haisheng

    2013-12-01

    Solar ELTs enable diffraction limited imaging of the basic structure of the solar atmosphere. Magneto-hydrodynamic considerations limit their size to about 0.03 arcsec. To observe them in the near-infrared 8-meter class telescopes are needed. The Chinese Giant Solar Telescope, or CGST, is such a NIR solar ELT. It is a Ring Telescope with 8-meter outer diameter and a central clear aperture of about 6-meter diameter. At present various options for such a Gregorian type telescope are under study like a continuous ring made of segments or a multiple aperture ring made of 7 off-axis telescopes. The advantages of such a ring telescope is that its MTF covers all spatial frequencies out to those corresponding to its outer diameter, that its circular symmetry makes it polarization neutral, and that its large central hole helps thermal control and provides ample space for MCAO and Gregorian instrumentation. We present the current status of the design of the CGST. Our thinking is guided by the outstanding performance of the 1-meter vacuum solar telescope of the Yunnan Solar Observatory which like the CGST uses both AO and image reconstruction. Using it with a ring-shape aperture mask the imaging techniques for the CGST are being explored. The CGST will have Multi-Conjugate Adaptive Optics (MCAO). The peculiarities of Atmospheric Wavefront Tomography for Ring Telescopes are aided by the ample availability of guide stars on the Sun. IR MCAO-aided diffraction limited imaging offers the advantage of a large FOV, and high solar magnetic field sensitivity. Site testing is proceeding in western China, (e.g. northern Yunnan Province and Tibet). The CGST is a Chinese solar community project originated by the Yunnan Astronomical Observatory, the National Astronomical Observatories, the Purple Mountain Observatory, the Nanjing University, the Nanjing Institute of Astronomical Optics & Technology and the Beijing Normal University.

  19. Calibration of water-velocity meters

    USGS Publications Warehouse

    Kaehrle, William R.; Bowie, James E.

    1988-01-01

    The U.S. Geological Survey, Department of the Interior, as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration of water-velocity meters at the Gulf Coast Hydroscience Center's Hydraulic Laboratory Facility, NSTL, Mississippi. These meters are used in hydrologic studies by the Geological Survey, U.S. Army Corps of Engineers, U.S. Department of Energy, state agencies, universities, and others in the public and private sector. This paper describes calibration facilities, types of water-velocity meters calibrated, and calibration standards, methods and results.

  20. Design Plans for an Inexpensive Tail Flick Analgesia Meter

    PubMed Central

    Otto, Aaron; Butcher, Greg Q.; Messina, Troy C.

    2011-01-01

    While the pedagogical benefits of incorporating inquiry driven labs into an undergraduate curriculum are well established, often the prohibitive costs of providing equipment for such labs limits the types of experiences that can be offered. For example, the lab portion of Advanced Neuroscience at Centenary College of Louisiana consists of a semester-long research project developed by the students. Frequently, these junior- and senior-level students generate interesting research questions that must be culled or scaled back simply due to a lack of appropriate equipment. In the most recent iteration of the class, the students wanted to examine analgesia using the tail flick test, a measure of spinal nociception. In this test a rodent subject is restrained; its tail is exposed to a heat source; and the latency to flick its tail away from the noxious stimuli is recorded. As commercial devices were far beyond the lab budget, we sought to develop an inexpensive tail flick analgesia meter that was easy to use and generated reliable data. The prototype device was tested by students in the above-mentioned class and was found to consistently produce reliable data in agreement with the literature. Here we present plans for a tail flick analgesia meter that can be constructed for $50–75, roughly 100 times cheaper than commercial devices. PMID:23626497

  1. Advanced smoke meter development survey and analysis

    NASA Technical Reports Server (NTRS)

    Pitz, R. W.; Penney, C. M.; Stanforth, C. M.; Shaffernocker, W. M.

    1984-01-01

    Ideal smoke meter characteristics are determined to provide a basis for evaluation of candidate systems. Five promising techniques are analyzed in detail to evaluate compilance with the practical smoke meter requirements. Four of the smoke measurement concepts are optical methods: Modulated Transmission (MODTRAN), Cross Beam Absorption Counter (CBAC), Laser Induced Incandescence (LIN), and Photoacoustic Spectroscopy (PAS). A rapid response filter instrument called a Taper Element Oscillating Microbalance (TEOM) is also evaluated. For each technique, the theoretical principles are described, the expected performance is determined, and the advantages and disadvantages are discussed The expected performance is evaluated against each of the smoke meter specifications, and the key questions for further study are given. The most promising smoke meter technique analyzed was MODTRAN, which is a variation on a direct transmission measurement. The soot-laden gas is passed through a transmission cell, and the gas pressure is modulated by a speaker.

  2. EMMNet: Sensor Networking for Electricity Meter Monitoring

    PubMed Central

    Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

    2010-01-01

    Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters. PMID:22163551

  3. Continuous flow measurements using fixed ultrasonic meters

    USGS Publications Warehouse

    Oltmann, Rick

    1993-01-01

    USGS has or soon will be installing four continuous flow-monitoring stations in the delta that will use ultrasonic velocity meters (DVM). Funding for the stations has been provided by USGS, DWR, USBR, and Contra Costa Water District.

  4. EMMNet: sensor networking for electricity meter monitoring.

    PubMed

    Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

    2010-01-01

    Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters.

  5. Solid state recording current meter conversion

    USGS Publications Warehouse

    Cheng, Ralph T.; Wang, Lichen

    1985-01-01

    The authors describe the conversion of an Endeco-174 current meter to a solid-state recording current meter. A removable solid-state module was designed to fit in the space originally occupied by an 8-track tape cartridge. The module contains a CPU and 128 kilobytes of nonvolatile CMOS memory. The solid-state module communicates with any terminal or computer using an RS-232C interface at 4800 baud rate. A primary consideration for conversion was to keep modifications of the current meter to a minimum. The communication protocol was designed to emulate the Endeco tape translation unit, thus the need for a translation unit was eliminated and the original data reduction programs can be used without any modification. After conversion, the data recording section of the current meter contains no moving parts; the storage capacity of the module is equivalent to that of the original tape cartridge.

  6. Class Size.

    ERIC Educational Resources Information Center

    Ellis, Thomas I.

    1985-01-01

    After a brief introduction identifying current issues and trends in research on class size, this brochure reviews five recent studies bearing on the relationship of class size to educational effectiveness. Part 1 is a review of two interrelated and highly controversial "meta-analyses" or statistical integrations of research findings on class size,…

  7. Class Matters

    ERIC Educational Resources Information Center

    Valdata, Patricia

    2005-01-01

    Ever since George Washington opted for the title of president rather than king, Americans have been uncomfortable with the idea of class distinctions. This article presents an interview with Dr. Janet Galligani Casey regarding the idea of class distinctions. Galligani Casey, who grew up in a working-class neighborhood in Somerville, Massachusetts,…

  8. Laser wavelength meter: analysis of measurement uncertainties

    NASA Astrophysics Data System (ADS)

    Skrzeczanowski, Wojciech; Zyczkowski, Marek; Dlugaszek, Andrzej

    1999-08-01

    Principle of operation of laser radiation wavelength meter based on Fabry-Perot interferometer and linear CCD camera is presented in the paper. A dependence, on the base of which laser wavelength can be calculated, is found and a way of defining of all component uncertainties of a measurement is shown. An analysis of an influence and examples of definition of uncertainties of a measurement for four wavelength meter structural sets of different objective focal lengths are presented.

  9. Comparison of five portable peak flow meters

    PubMed Central

    Takara, Glaucia Nency; Ruas, Gualberto; Pessoa, Bruna Varanda; Jamami, Luciana Kawakami; Di Lorenzo, Valéria Amorim Pires; Jamami, Mauricio

    2010-01-01

    OBJECTIVE To compare the measurements of spirometric peak expiratory flow (PEF) from five different PEF meters and to determine if their values are in agreement. Inaccurate equipment may result in incorrect diagnoses of asthma and inappropriate treatments. METHODS Sixty-eight healthy, sedentary and insufficiently active subjects, aged from 19 to 40 years, performed PEF measurements using Air Zone®, Assess®, Galemed®, Personal Best® and Vitalograph® peak flow meters. The highest value recorded for each subject for each device was compared to the corresponding spirometric values using Friedman’s test with Dunn’s post-hoc (p<0.05), Spearman’s correlation test and Bland-Altman’s agreement test. RESULTS The median and interquartile ranges for the spirometric values and the Air Zone®, Assess®, Galemed®, Personal Best® and Vitalograph® meters were 428 (263–688 L/min), 450 (350–800 L/min), 420 (310–720 L/min), 380 (300–735 L/min), 400 (310–685 L/min) and 415 (335–610 L/min), respectively. Significant differences were found when the spirometric values were compared to those recorded by the Air Zone® (p<0.001) and Galemed ® (p<0.01) meters. There was no agreement between the spirometric values and the five PEF meters. CONCLUSIONS The results suggest that the values recorded from Galemed® meters may underestimate the actual value, which could lead to unnecessary interventions, and that Air Zone® meters overestimate spirometric values, which could obfuscate the need for intervention. These findings must be taken into account when interpreting both devices’ results in younger people. These differences should also be considered when directly comparing values from different types of PEF meters. PMID:20535364

  10. Perception of strong-meter and weak-meter rhythms in children with spina bifida meningomyelocele

    PubMed Central

    HOPYAN, TALAR; SCHELLENBERG, E. GLENN; DENNIS, MAUREEN

    2011-01-01

    Neurodevelopmental disorders such as spina bifida meningomyelocele (SBM) are often associated with dysrhythmic movement. We studied rhythm discrimination in 21 children with SBM and in 21 age-matched controls, with the research question being whether both groups showed a strong-meter advantage whereby rhythm discrimination is better for rhythms with a strong-meter, in which onsets of longer intervals occurred on the beat, than those with a weak-meter, in which onsets of longer intervals occurred off the beat. Compared to controls, the SBM group was less able to discriminate strong-meter rhythms, although they performed comparably in discriminating weak-meter rhythms. The attenuated strong-meter advantage in children with SBM shows that their rhythm deficits occur at the level of both perception and action, and may represent a central processing disruption of the brain mechanisms for rhythm. PMID:19573270

  11. PROCEEDINGS OF THE WEST COAST REGIONAL CONFERENCE ON RESEARCH RELATED TO BLIND AND SEVERELY VISUALLY IMPAIRED CHILDREN (SAN FRANCISCO, MARCH 8-10, 1965).

    ERIC Educational Resources Information Center

    CLARK, LESLIE L.; AND OTHERS

    THESE PROCEEDINGS WERE PREPARED FROM THE WEST COAST REGIONAL CONFERENCE ON RESEARCH RELATED TO BLIND AND SEVERELY VISUALLY IMPAIRED CHILDREN HELD MARCH 8-10, 1965. SURVEY RESULTS WERE PRESENTED WHICH INDICATED THE NUMBER OF BLIND, SEVERELY VISUALLY IMPAIRED, AND MULTIPLY HANDICAPPED CHILDREN IN CALIFORNIA AND THE INCIDENCE OF BLINDNESS IN CHILDREN…

  12. A Double-Blind, Placebo-Controlled Study Investigating the Effects of Omega-3 Supplementation in Children Aged 8-10 Years from a Mainstream School Population

    ERIC Educational Resources Information Center

    Kirby, A.; Woodward, A.; Jackson, S.; Wang, Y.; Crawford, M. A.

    2010-01-01

    Despite the increased interest in the effects of omega-3 supplementation on childrens' learning and behaviour, there are a lack of controlled studies of this kind that have utilised a typically developing population. This study investigated the effects of omega-3 supplementation in 450 children aged 8-10 years old from a mainstream school…

  13. 40 CFR 721.10024 - 10H-Phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-branched alkyl) derivs. 721.10024 Section 721.10024 Protection of Environment ENVIRONMENTAL PROTECTION... alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 10H-phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs (PMN P-01-771; CAS...

  14. 40 CFR 721.10024 - 10H-Phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-branched alkyl) derivs. 721.10024 Section 721.10024 Protection of Environment ENVIRONMENTAL PROTECTION... alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 10H-phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs (PMN P-01-771; CAS...

  15. 40 CFR 721.10024 - 10H-Phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-branched alkyl) derivs. 721.10024 Section 721.10024 Protection of Environment ENVIRONMENTAL PROTECTION... alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 10H-phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs (PMN P-01-771; CAS...

  16. 40 CFR 721.10024 - 10H-Phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-branched alkyl) derivs. 721.10024 Section 721.10024 Protection of Environment ENVIRONMENTAL PROTECTION... alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 10H-phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs (PMN P-01-771; CAS...

  17. 40 CFR 721.10024 - 10H-Phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-branched alkyl) derivs. 721.10024 Section 721.10024 Protection of Environment ENVIRONMENTAL PROTECTION... alkyl) derivs. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as 10H-phenothiazine, ar-(C9-rich C8-10-branched alkyl) derivs (PMN P-01-771; CAS...

  18. PROCEEDINGS AND SUMMARY REPORT: WORKSHOP ON THE FATE, TRANSPORT, AND TRANSFORMATION OF MERCURY IN AQUATIC AND TERRESTRIAL ENVIRONMENTS, MAY 8-10, 2001, WEST PALM BEACH, FLORIDA

    EPA Science Inventory

    The Workshop on the Fate, Transport, and Transformation of Mercury in Aquatic and Terrestrial Environments was held on May 8-10, 2001 in West Palm Beach, Florida. The workshop was conducted by the USEPA's Office of Research and Development and cosponsored by the U.S. Geological S...

  19. Outcomes of a School-Based Intervention (RESCATE) to Improve Physical Activity Patterns in Mexican Children Aged 8-10 Years

    ERIC Educational Resources Information Center

    Colin-Ramirez, E.; Castillo-Martinez, L.; Orea-Tejeda, A.; Vergara-Castaneda, A.; Keirns-Davis, C.; Villa-Romero, A.

    2010-01-01

    The aim of this study was to evaluate the impact of an intervention program on the patterns of physical activity in 8- to 10-year-old Mexican children from lower socioeconomic status. This study performed a randomized controlled field trial in 498 children aged 8-10 years from 10 public schools of low socioeconomic status in Mexico City. Schools…

  20. 40 CFR 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... RESIDUES IN FOOD Exemptions From Tolerances § 180.1126 Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from... inadvertent physical contact. The design of the dispenser must be such as to preclude any exposure of its components to the raw agricultural commodity (RAC) or processed foods/feeds derived from the commodity due...

  1. Measuring Neural Entrainment to Beat and Meter in Infants: Effects of Music Background.

    PubMed

    Cirelli, Laura K; Spinelli, Christina; Nozaradan, Sylvie; Trainor, Laurel J

    2016-01-01

    Caregivers often engage in musical interactions with their infants. For example, parents across cultures sing lullabies and playsongs to their infants from birth. Behavioral studies indicate that infants not only extract beat information, but also group these beats into metrical hierarchies by as early as 6 months of age. However, it is not known how this is accomplished in the infant brain. An EEG frequency-tagging approach has been used successfully with adults to measure neural entrainment to auditory rhythms. The current study is the first to use this technique with infants in order to investigate how infants' brains encode rhythms. Furthermore, we examine how infant and parent music background is associated with individual differences in rhythm encoding. In Experiment 1, EEG was recorded while 7-month-old infants listened to an ambiguous rhythmic pattern that could be perceived to be in two different meters. In Experiment 2, EEG was recorded while 15-month-old infants listened to a rhythmic pattern with an unambiguous meter. In both age groups, information about music background (parent music training, infant music classes, hours of music listening) was collected. Both age groups showed clear EEG responses frequency-locked to the rhythms, at frequencies corresponding to both beat and meter. For the younger infants (Experiment 1), the amplitudes at duple meter frequencies were selectively enhanced for infants enrolled in music classes compared to those who had not engaged in such classes. For the older infants (Experiment 2), amplitudes at beat and meter frequencies were larger for infants with musically-trained compared to musically-untrained parents. These results suggest that the frequency-tagging method is sensitive to individual differences in beat and meter processing in infancy and could be used to track developmental changes. PMID:27252619

  2. Measuring Neural Entrainment to Beat and Meter in Infants: Effects of Music Background.

    PubMed

    Cirelli, Laura K; Spinelli, Christina; Nozaradan, Sylvie; Trainor, Laurel J

    2016-01-01

    Caregivers often engage in musical interactions with their infants. For example, parents across cultures sing lullabies and playsongs to their infants from birth. Behavioral studies indicate that infants not only extract beat information, but also group these beats into metrical hierarchies by as early as 6 months of age. However, it is not known how this is accomplished in the infant brain. An EEG frequency-tagging approach has been used successfully with adults to measure neural entrainment to auditory rhythms. The current study is the first to use this technique with infants in order to investigate how infants' brains encode rhythms. Furthermore, we examine how infant and parent music background is associated with individual differences in rhythm encoding. In Experiment 1, EEG was recorded while 7-month-old infants listened to an ambiguous rhythmic pattern that could be perceived to be in two different meters. In Experiment 2, EEG was recorded while 15-month-old infants listened to a rhythmic pattern with an unambiguous meter. In both age groups, information about music background (parent music training, infant music classes, hours of music listening) was collected. Both age groups showed clear EEG responses frequency-locked to the rhythms, at frequencies corresponding to both beat and meter. For the younger infants (Experiment 1), the amplitudes at duple meter frequencies were selectively enhanced for infants enrolled in music classes compared to those who had not engaged in such classes. For the older infants (Experiment 2), amplitudes at beat and meter frequencies were larger for infants with musically-trained compared to musically-untrained parents. These results suggest that the frequency-tagging method is sensitive to individual differences in beat and meter processing in infancy and could be used to track developmental changes.

  3. Measuring Neural Entrainment to Beat and Meter in Infants: Effects of Music Background

    PubMed Central

    Cirelli, Laura K.; Spinelli, Christina; Nozaradan, Sylvie; Trainor, Laurel J.

    2016-01-01

    Caregivers often engage in musical interactions with their infants. For example, parents across cultures sing lullabies and playsongs to their infants from birth. Behavioral studies indicate that infants not only extract beat information, but also group these beats into metrical hierarchies by as early as 6 months of age. However, it is not known how this is accomplished in the infant brain. An EEG frequency-tagging approach has been used successfully with adults to measure neural entrainment to auditory rhythms. The current study is the first to use this technique with infants in order to investigate how infants' brains encode rhythms. Furthermore, we examine how infant and parent music background is associated with individual differences in rhythm encoding. In Experiment 1, EEG was recorded while 7-month-old infants listened to an ambiguous rhythmic pattern that could be perceived to be in two different meters. In Experiment 2, EEG was recorded while 15-month-old infants listened to a rhythmic pattern with an unambiguous meter. In both age groups, information about music background (parent music training, infant music classes, hours of music listening) was collected. Both age groups showed clear EEG responses frequency-locked to the rhythms, at frequencies corresponding to both beat and meter. For the younger infants (Experiment 1), the amplitudes at duple meter frequencies were selectively enhanced for infants enrolled in music classes compared to those who had not engaged in such classes. For the older infants (Experiment 2), amplitudes at beat and meter frequencies were larger for infants with musically-trained compared to musically-untrained parents. These results suggest that the frequency-tagging method is sensitive to individual differences in beat and meter processing in infancy and could be used to track developmental changes. PMID:27252619

  4. Operational experiences proving mass flow meters with small volume provers

    SciTech Connect

    Whitman, S.K.

    1996-09-01

    Small Volume Provers were introduced several decades ago, and numerous papers have been presented covering the technical and empirical operation of these provers. During this time, mass flow meters based upon the coriolis effect have evolved. The measurement accuracy of these meters has continually improved to the degree that the Hydrocarbon Industry is closely evaluating them for custody transfer measurement. Flow meters used in custody transfer measurement normally require some means of verification, which is generally referred to as meter proving. Meter proving methods for traditional volumetric meters are well established, while those for mass flow meters are still evolving. Coriolis mass flow meters are fundamentally different from traditional custody transfer meters. Therefore, a basic understanding of the principles of operation is necessary to properly prove mass flow meters. This paper will focus on the basic knowledge needed to prove mass meters, with actual case histories to demonstrate operational experiences with small volume provers.

  5. Computational physics and applied mathematics capability review June 8-10, 2010 (Advance materials to committee members)

    SciTech Connect

    Lee, Stephen R

    2010-01-01

    (broadly defined) in a variety of settings, including particle transport, solvers, and plasma physics; (3) Monte Carlo - Monte Carlo was invented at Los Alamos, and this theme discusses these vitally important methods and their application in everything from particle transport, to condensed matter theory, to biology; (4) Molecular Dynamics - This theme describes the widespread use of molecular dynamics for a variety of important applications, including nuclear energy, materials science, and biological modeling; (5) Discrete Event Simulation - The technical scope of this theme represents a class of complex system evolutions governed by the action of discrete events. Examples include network, communication, vehicle traffic, and epidemiology modeling; and (6) Integrated Codes - This theme discusses integrated applications (comprised of all of the supporting science represented in Themes 1-5) that are of strategic importance to the Laboratory and the nation. The laboratory has in approximately 10 million source lines of code in over 100 different such strategically important applications. Of these themes, four of them will be reviewed during the 2010 review cycle: Themes 1, 2, 3, and 6. Because these capability reviews occur every three years, Themes 4 and 5 will be reviewed in 2013, along with Theme 6 (which will be reviewed during each review, owing to this theme's role as an integrator of the supporting science represented by the other 5 themes). Yearly written status reports will be provided to the Capability Review Committee Chair during off-cycle years.

  6. The 4-meter lunar engineering telescope

    NASA Technical Reports Server (NTRS)

    Peacock, Keith; Giannini, Judith A.; Kilgus, Charles C.; Bely, Pierre Y.; May, B. Scott; Cooper, Shannon A.; Schlimm, Gerard H.; Sounder, Charles; Ormond, Karen; Cheek, Eric

    1991-01-01

    The 16-meter diffraction limited lunar telescope incorporates a primary mirror with 312 one-meter segments; 3 nanometer active optics surface control with laser metrology and hexapod positioners; a space frame structure with one-millimeter stability; and a hexapod mount for pointing. The design data needed to limit risk in this development can be obtained by building a smaller engineering telescope on the moon with all of the features of the 16-meter design. This paper presents a 4.33-meter engineering telescope concept developed by the Summer 1990 Student Program of the NASA/JHU Space Grant Consortium Lunar Telescope Project. The primary mirror, made up of 18 one-meter hexagonal segments, is sized to provide interesting science as well as engineering data. The optics are configured as a Ritchey-Chretien with a coude relay to the focal plane beneath the surface. The optical path is continuously monitored with 3-nanometer precision interferometrically. An active optics processor and piezoelectric actuators operate to maintain the end-to-end optical configuration established by wave front sensing using a guide star. The mirror segments, consisting of a one-centimeter thick faceplate on 30-cm deep ribs, maintain the surface figure to a few nanometers under lunar gravity and thermal environment.

  7. 20 Meter Solar Sail Analysis and Correlation

    NASA Technical Reports Server (NTRS)

    Taleghani, B. K.; Lively, P. S.; Banik, J.; Murphy, D. M.; Trautt, T. A.

    2005-01-01

    This paper describes finite element analyses and correlation studies to predict deformations and vibration modes/frequencies of a 20-meter solar sail system developed by ATK Space Systems. Under the programmatic leadership of NASA Marshall Space Flight Center's In-Space Propulsion activity, the 20-meter solar sail program objectives were to verify the design, to assess structural responses of the sail system, to implement lessons learned from a previous 10-meter quadrant system analysis and test program, and to mature solar sail technology to a technology readiness level (TRL) of 5. For this 20 meter sail system, static and ground vibration tests were conducted in NASA Glenn Research Center's 100 meter diameter vacuum chamber at Plum Brook station. Prior to testing, a preliminary analysis was performed to evaluate test conditions and to determine sensor and actuator locations. After testing was completed, an analysis of each test configuration was performed. Post-test model refinements included updated properties to account for the mass of sensors, wiring, and other components used for testing. This paper describes the development of finite element models (FEM) for sail membranes and masts in each of four quadrants at both the component and system levels, as well as an optimization procedure for the static test/analyses correlation.

  8. Use of Coriolis meters in gas applications

    SciTech Connect

    Patten, T.; Pawlas, G.

    1995-12-31

    Coriolis mass flowmeters provide a solution for measuring the mass flow rate of gases directly. Recent calibration data on compressed air shows that the factory water calibration is also valid on air. In addition, a Coriolis meter is fundamentally linear resulting in an accurate measurement over a wide flow range. Data are presented based on testing performed on Micro Motion 25 mm, 50 mm, and 75 mm Coriolis mass flowmeters on compressed air. Test pressures ranging between 1.7 bar (25 psia) and 100 bar (1450 psia) and mass flow rates ranging between 100:1 to 10:1, depending on the meter size. All calibration points fell with {plus_minus}2%, with a significant portion of the data within {plus_minus}5%. Data are also presented for a 6 mm meter on natural gas at 100 bar; all data are within {plus_minus}0.5%. Repeatability data are presented for a 9 mm meter calibrated on 100 bar air for calibration run times between 10 and 60 seconds. Meter repeatability improved approximately 10 times to {plus_minus}0.15% when the calibration time was 60 seconds.

  9. Diagnostic Flow Metering using Ultrasound Tomography

    NASA Astrophysics Data System (ADS)

    Chun, Sejong; Yoon, Byung-Ro; Lee, Kwang-Bock; Paik, Jong-Seung

    2010-06-01

    Flow meters, which are used for transferring water or crude oil through pipelines, require well-defined flow conditions for accurate flow rate monitoring. Even though all the installation conditions for the flow meters are satisfied, there could be unexpected flow disturbances, such as abrupt increase of upstream pressure, affecting on the performance of flow meters. To investigate any differences between measured and actual flow rates, flow velocity profiles inside the pipeline must be known. Ultrasound tomography is a means of reconstructing flow profiles from line-averaged velocities by Radon transformation. Diagnostic parameters are then extracted from the reconstructed flow profiles to give information whether the flow conditions are appropriate for accurate flow metering. In the present study, flow profiles downstream of a mass flow meter and a butterfly valve are reconstructed. Flow diagnostic parameters are defined using statistical moments such as mean value, standard deviation, skewness and kurtosis. The measured diagnostic parameters in the above-mentioned flow conditions are compared with those of fully-developed laminar and turbulent flow profiles to validate their usefulness.

  10. Witnessing orifice meter calibration and field testing

    SciTech Connect

    Woods, D.

    1995-12-01

    It would seem with the advent of electronic measurement and electronic custody transfer of natural gas and other petroleum products that witnessing orifice meter calibration and field testing would become an obsolete practice in the petroleum industry. This however, is not the case. Due to low volume measurement, remote locations, dollar cost of electronic measurement, and arrangements between companies regarding electronic custody, transfer, witnessing orifice meter calibration and field testing will continue to be an integral part of the petroleum industry`s future. Even as technology moves forward and electronic measurement becomes common within the petroleum industry, electronic hardware used in measurement will, like the orifice recorder, only be a secondary measuring device. The meter tube and orifice plate will continue to be the primary measuring device. Due to these circumstances witnessing orifice meter calibration and field testing will also continue to be important even though some emphasis will be shifted to witnessing field testing of electronic equipment. The information in this paper is not meant to be an absolute, but, to be used as a guide in witnessing and field testing orifice meters. There are many variables in testing that. due to the length of this paper, will not be discussed.

  11. Instantaneous bit-error-rate meter

    NASA Astrophysics Data System (ADS)

    Slack, Robert A.

    1995-06-01

    An instantaneous bit error rate meter provides an instantaneous, real time reading of bit error rate for digital communications data. Bit error pulses are input into the meter and are first filtered in a buffer stage to provide input impedance matching and desensitization to pulse variations in amplitude, rise time and pulse width. The bit error pulses are transformed into trigger signals for a timing pulse generator. The timing pulse generator generates timing pulses for each transformed bit error pulse, and is calibrated to generate timing pulses having a preselected pulse width corresponding to the baud rate of the communications data. An integrator generates a voltage from the timing pulses that is representative of the bit error rate as a function of the data transmission rate. The integrated voltage is then displayed on a meter to indicate the bit error rate.

  12. Fuel metering and transfer control system

    SciTech Connect

    Mathieson, R.W.

    1980-10-14

    An auxiliary fuel metering and transfer control system for an internal combustion engine is described. The system consists essentially of a pressure vessel for storage of propane, methane, natural gas or a similar gaseous fuel, a pressure regulator for maintaining constant gaseous fuel pressure during operation of the system, a solenoid valve and a magnetic reset safety switch, a metering valve, a transfer valve and an auxiliary fuel nozzle positioned in the venturi of the carburetor on the engine using the system. The metering valve operates in response to changes in the intake manifold vacuum of the engine and changes in the air velocity in the carburetor of the engine. The transfer valve operates in response to movement of the throttle linkage on the carburetor of the engine. During operation of the engine, the system is substituted for both the idle circuit or system and the acceleration circuit or system of the carburetor.

  13. Orbital and Physical Characteristics of Meter-sized Earth Impactors

    NASA Astrophysics Data System (ADS)

    Brown, Peter G.; Wiegert, Paul; Clark, David; Tagliaferri, Edward

    2015-11-01

    We have analysed the orbits and ablation characteristics in the atmosphere of more than 60 earth-impacting meteoroids of one meter in diameter or larger. Using heights at peak luminosity as a proxy for strength, we find that there is roughly an order of magnitude spread in the apparent strength of the population of meter-sized impactors at the Earth. The orbits and physical strength of these objects are consistent with the majority being asteroidal bodies originating from the inner main asteroid belt. We find ~10-15% of our objects have a probable cometary (Jupiter-Family comet and/or Halley-type comet) origin based on orbital characteristics alone. Only half this number, however, show evidence for the expected weaker than average structure compared to asteroidal bodies. Almost all impactors show peak brightness between 20-40 km altitude. Several events have exceptionally high (relative to the remainder of the population) heights of peak brightness. These are physically most consistent with high microporosity objects, though all were on asteroidal-type orbits. We also find three events, including the Oct 8, 2009 airburst near Sulawesi, Indonesia, which display comparatively low heights of peak brightness, consistent with strong monolithic stones or iron meteoroids. Based on orbital similarity, we find a probable connection among several NEOs in our population with the Taurid meteoroid complex. No other major meteoroid streams show linkages with the pre-atmospheric orbits of our meter-class impactors. Our events cover almost four orders of magnitude in mass, but no trend in height of peak brightness is evident, suggesting no strong trend in strength with size for small NEOs, a finding consistent with the results of Popova et al (2011).

  14. Liquid metal Flow Meter - Final Report

    SciTech Connect

    Andersen, C.; Hoogendoom, S.; Hudson, B.; Prince, J.; Teichert, K.; Wood, J.; Chase, K.

    2007-01-30

    Measuring the flow of liquid metal presents serious challenges. Current commercially-available flow meters use ultrasonic, electromagnetic, and other technologies to measure flow, but are inadequate for liquid metal flow measurement because of the high temperatures required by most liquid metals. As a result of the reactivity and high temperatures of most liquid metals, corrosion and leakage become very serious safety concerns. The purpose of this project is to develop a flow meter for Lockheed Martin that measures the flow rate of molten metal in a conduit.

  15. The Thirty Meter Telescope (TMT) Project

    NASA Astrophysics Data System (ADS)

    Sanders, G.; TMT Project

    2004-12-01

    The Thirty Meter Telescope (TMT) Project is engaged in a design and development phase. TMT is proposed as a private-public partnership of the California Institute of Technology and the University of California (partners in the earlier CELT design study), AURA (designers of the earlier GSMT concept), and the Canadian ACURA consortium (designers of the VLOT concept). The partners are developing a 30 meter diameter, finely segmented filled aperture telescope with seeing-limited and diffraction-limited capabilities to address the broad range of GSMT science goals. The paper will present the status of the project development and telescope and instrument design.

  16. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Customer meter installations: Operating pressure... Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure. (a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's...

  17. 40 CFR 1065.225 - Intake-air flow meter.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... flow meter. (a) Application. You may use an intake-air flow meter in combination with a chemical..., you may use an intake-air flow meter signal that does not give the actual value of raw exhaust, as... requirements. We recommend that you use an intake-air flow meter that meets the specifications in Table 1...

  18. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Customer meters and regulators: Installation. 192... Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a) Each meter and each regulator must be installed so as to minimize anticipated stresses upon...

  19. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Customer meters and regulators: Installation. 192... Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a) Each meter and each regulator must be installed so as to minimize anticipated stresses upon...

  20. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Customer meter installations: Operating pressure... Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure. (a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's...

  1. 49 CFR 192.353 - Customer meters and regulators: Location.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Customer meters and regulators: Location. 192.353... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.353 Customer meters and regulators: Location. (a) Each meter and...

  2. 49 CFR 192.353 - Customer meters and regulators: Location.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Customer meters and regulators: Location. 192.353... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.353 Customer meters and regulators: Location. (a) Each meter and...

  3. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Customer meters and regulators: Installation. 192... Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a) Each meter and each regulator must be installed so as to minimize anticipated stresses upon...

  4. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Customer meter installations: Operating pressure... Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure. (a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's...

  5. 49 CFR 192.353 - Customer meters and regulators: Location.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Customer meters and regulators: Location. 192.353... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.353 Customer meters and regulators: Location. (a) Each meter and...

  6. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Customer meters and regulators: Installation. 192... Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a) Each meter and each regulator must be installed so as to minimize anticipated stresses upon...

  7. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Customer meter installations: Operating pressure... Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure. (a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's...

  8. 49 CFR 192.353 - Customer meters and regulators: Location.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Customer meters and regulators: Location. 192.353... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.353 Customer meters and regulators: Location. (a) Each meter and...

  9. 39 CFR 501.15 - Computerized Meter Resetting System.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Computerized Meter Resetting System. 501.15... AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS § 501.15 Computerized Meter Resetting System. (a) Description. The Computerized Meter Resetting System (CMRS) permits customers to reset their postage meters...

  10. 49 CFR 192.353 - Customer meters and regulators: Location.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.353 Customer meters and regulators: Location. (a) Each meter and service... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meters and regulators: Location....

  11. Repeatability and oblique flow response characteristics of current meters

    USGS Publications Warehouse

    Fulford, Janice M.; Thibodeaux, Kirk G.; Kaehrle, William R.

    1993-01-01

    Laboratory investigation into the precision and accuracy of various mechanical-current meters are presented. Horizontal-axis and vertical-axis meters that are used for the measurement of point velocities in streams and rivers were tested. Meters were tested for repeatability and response to oblique flows. Both horizontal- and vertical-axis meters were found to under- and over-register oblique flows with errors generally increasing as the velocity and angle of flow increased. For the oblique flow tests, magnitude of errors were smallest for horizontal-axis meters. Repeatability of all meters tested was good, with the horizontal- and vertical-axis meters performing similarly.

  12. Real life experience with multipath ultrasonic gas flow meters

    SciTech Connect

    Sakariassen, R.

    1996-12-31

    Multipath ultrasonic gas flow meters are to be considered as newcomers among flow meters for large, high pressure gas flows. Although the advantages of this type of meters are many and obvious, the metering community is still hesitating to go for it mainly because of lack of experience. The objective of this paper is to present the experience of Statoil after more than six years experience with multipath ultrasonic gas flow meters. Their experience includes laboratory testing and operation in the field for a variety of designs and dimensions. This paper presents the accuracy achieved by such meters including comparison between ultrasonic meters and orifice metering systems in operation, the unique possibilities that this type of meter offers for on-line verification of performance and installation effects. Of particular interest should be noted that in the vicinity of low-noise control valves, such meters could stop functioning completely if no precautions are taken.

  13. Comparison of current meters used for stream gaging

    USGS Publications Warehouse

    Fulford, Janice M.; Thibodeaux, Kirk G.; Kaehrle, William R.

    1994-01-01

    The U.S. Geological Survey (USGS) is field and laboratory testing the performance of several current meters used throughout the world for stream gaging. Meters tested include horizontal-axis current meters from Germany, the United Kingdom, and the People's Republic of China, and vertical-axis and electromagnetic current meters from the United States. Summarized are laboratory test results for meter repeatability, linearity, and response to oblique flow angles and preliminary field testing results. All current meters tested were found to under- and over-register velocities; errors usually increased as the velocity and angle of the flow increased. Repeatability and linearity of all meters tested were good. In the field tests, horizontal-axis meters, except for the two meters from the People's Republic of China, registered higher velocity than did the vertical-axis meters.

  14. The 5- by 7-meter Wind Tunnel of the DVL

    NASA Technical Reports Server (NTRS)

    Kramer, M

    1936-01-01

    The report contains a description of the DVL wind tunnel. According to the cones fixed, an elliptical stream with axes 5 by 7 meters and length 9 meters, or a stream 6 by 8 meters in cross section and 11 meters in length is available. The top speed with the smaller cone is 65 meters per second. The testing equipment consists of an automatic six-component balance and a test rig for propellers and engines up to 650 horsepower.

  15. Educational Electrical Appliance Power Meter and Logger

    ERIC Educational Resources Information Center

    Nunn, John

    2013-01-01

    The principles behind two different designs of inductive power meter are presented. They both make use of the microphone input of a computer which, together with a custom-written program, can record the instantaneous power of a domestic electrical appliance. The device can be built quickly and can be calibrated with reference to a known power…

  16. Performance of planter meters for cotton

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Components and technology offerings to improve planter performance continue to increase. In particular, new row-meter parts allow units to improve what is called singulation (e.g. reducing skips and doubles) assuming the vacuum pressure is properly set. To help understand the value of all this new t...

  17. Numerical modeling of fluidic flow meters

    NASA Astrophysics Data System (ADS)

    Choudhury, D.; Patel, B. R.

    1992-05-01

    The transient fluid flow in fluidic flow meters has been modeled using Creare.x's flow modeling computer program FLUENT/BFC that solves the Navier-Stokes equations in general curvilinear coordinates. The numerical predictions of fluid flow in a fluidic flow meter have been compared with the available experimental results for a particular design, termed the PC-4 design. Overall flow structures such as main jet bending, and primary and secondary vortices predicted by FLUENT/BFC are in excellent agreement with flow visualization results. The oscillation frequencies of the PC-4 design have been predicted for a range of flow rates encompassing laminar and turbulent flow and the results are in good agreement with experiments. The details of the flow field predictions reveal that an important factor that determines the onset of oscillations in the fluidic flow meter is the feedback jet momentum relative to the main jet momentum. The insights provided by the analysis of the PC-4 fluidic flow meter design have led to an improved design. The improved design has sustained oscillations at lower flow rates compared with the PC-4 design and has a larger rangeability.

  18. 78 FR 20628 - Wireless Metering Challenge

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-05

    ... of Energy Efficiency and Renewable Energy Wireless Metering Challenge AGENCY: Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy. ACTION: Notice of availability; request for comments. SUMMARY: The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable...

  19. Lightweight high-temperature fuel metering valves

    NASA Astrophysics Data System (ADS)

    Bennett, Joe

    AlliedSignal Fluid systems has provided fuel metering valve hardware to three aircraft engine manufacturers for evaluation. Two of the progams were Integrated High Performance Turbine Engine Technology (IHPTET) related. The third program was an IR&D effort. Bench tests and evaluation of all three valve designs have been completed, and one of the designs has actually been used for engine test. Engine testing of the other two valve designs is planned for the future. These three designs are similar, but each is intended to be usused in different system configurations, and each valve design offers unique features. The design approaches used for the three valve designs incorporate several new and innovative technologies, including high-temperature brushless dc motor actuators, low-pressure loss metering element design, fiber optic rotarty output position sensor, no-moving-parts oscillating jet flow meter, high-temperature RS (rapid solidification) aluminum alloy, high-temperature elastomeric seals, high-pressure shutoff capabilities, and closed loop electronic fuel flow metering.

  20. Developments in electronic meter reading systems

    SciTech Connect

    Not Available

    1987-05-01

    Southern California Gas Co. is using a hand-held remote meter reading device that has reduced reading efforts, skips and field re-reads and has increased speed so that route conditions can be reported in a timely fashion. Details of how the system works through the company's mainframe computer are given.

  1. Modernization of the DFA Moisture Meter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Dried Fruit Association (DFA) Dried Fruit Moisture Tester has been the standard technique for determining moisture in dried fruit for more than 50 years. This method of testing moisture is recognized world wide and is AOAC approved. The meter applies the results of conductivity measurements and ...

  2. Meter Designs Reduce Operation Costs for Industry

    NASA Technical Reports Server (NTRS)

    2013-01-01

    Marshall Space Flight Center collaborated with Quality Monitoring and Control (QMC) of Humble, Texas, through a Space Act Agreement to design a balanced flow meter for the Space Shuttle Program. QMC founded APlus-QMC LLC to commercialize the technology, which has contributed to 100 new jobs, approximately $250,000 in yearly sales, and saved customers an estimated $10 million.

  3. KVP meter errors induced by plastic wrap

    SciTech Connect

    Jefferies, D.; Morris, J.W.; White, V.P. )

    1991-02-01

    The purpose of this study was to determine whether erroneous kVp meter readings, induced by plastic wrap, affected the actual kVp (output) of a dental X-ray machine. To evaluate the effect of plastic wrap on dental X-ray machine kVp meters, a radiation output device was used to measure output in mR/ma.s. An intraoral dental X-ray unit (S.S. White Model {number sign}90W) was used to make the exposures. First, the kVp meter was not covered with plastic wrap and output readings were recorded at various kVp settings with the milliamperage and time held constant. Secondly, the same kVp settings were selected before the plastic wrap was placed. Milliamperage and time were again held to the same constant. The X-ray console was then covered with plastic wrap prior to measuring the output for each kVp. The wrap possessed a static charge. This charge induced erroneous kVp meter readings. Out-put readings at the various induced kVp settings were then recorded. A kVp of 50 with no wrap present resulted in the same output as a kVp of 50 induced to read 40 or 60 kVp by the presence of wrap. Similar results were obtained at other kVp settings. This indicates that the plastic wrap influences only the kVp meter needle and not the actual kilovoltage of the X-ray machine. Dental X-ray machine operators should select kVp meter readings prior to placing plastic wrap and should not adjust initial settings if the meter is deflected later by the presence of wrap. The use of such a procedure will result in proper exposures, fewer retakes, and less patient radiation. If plastic wrap leads to consistent exposure errors, clinicians may wish to use a 0.5% sodium hypochlorite disinfectant as an alternative to the barrier technique.

  4. Natural gas vehicle fueling station dispenser meter evaluations

    SciTech Connect

    Rowley, P.F.; Kriha, K.; Blazek, C.F.

    1995-12-31

    The Institute of Gas Technology (IGT) has constructed a multi-purpose meter evaluation facility capable of testing metering technologies for high flow rate and high pressure NGV dispenser applications. The objective of IGT`s meter evaluation program, sponsored by IGT`s Sustaining Membership Program and the Gas Research Institute, is to assist the industry in evaluating the performance and accuracy of currently available flowmeters that are being used or could be applied to CNG gas dispensing. These meters are tested at various flow rates and pressures to determine their performance under NGV fueling station operating conditions and to identify the performance characteristics and limitations for each meter. The metering technologies which are being evaluated under this program include Coriolis meter, sonic nozzle meter, and turbine meter designs.

  5. Design Study of 8 Meter Monolithic Mirror UV/Optical Space Telescope

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2008-01-01

    The planned Ares V launch vehicle with its 10 meter fairing shroud and 55,000 kg capacity to the Sun Earth L2 point enables entirely new classes of space telescopes. NASA MSFC has conducted a preliminary study that demonstrates the feasibility of launching a 6 to 8 meter class monolithic primary mirror telescope to Sun-Earth L2 using an Ares V. Specific technical areas studied included optical design; structural design/analysis including primary mirror support structure, sun shade and secondary mirror support structure; thermal analysis; launch vehicle performance and trajectory; spacecraft including structure, propulsion, GN&C, avionics, power systems and reaction wheels; operations and servicing; mass and power budgets; and system cost.

  6. Community Net Energy Metering: How Novel Policies Expand Benefits of Net Metering to Non-Generators

    SciTech Connect

    Rose, James; Varnado, Laurel

    2009-04-01

    As interest in community solutions to renewable energy grows, more states are beginning to develop policies that encourage properties with more than one meter to install shared renewable energy systems. State net metering policies are evolving to allow the aggregation of multiple meters on a customer’s property and to dissolve conventional geographical boundaries. This trend means net metering is expanding out of its traditional function as an enabling incentive to offset onsite customer load at a single facility. This paper analyzes community net energy metering (CNEM) as an emerging vehicle by which farmers, neighborhoods, and municipalities may more easily finance and reap the benefits of renewable energy. Specifically, it aims to compare and contrast the definition of geographical boundaries among different CNEM models and examine the benefits and limitations of each approach. As state policies begin to stretch the geographic boundaries of net metering, they allow inventive solutions to encourage renewable energy investment. This paper attempts to initiate the conversation on this emerging policy mechanism and offers recommendations for further development of these policies.

  7. Numerical simulation of flow through orifice meters

    NASA Astrophysics Data System (ADS)

    Barry, J. J.; Sheikholeslami, M. Z.; Patel, B. R.

    1992-05-01

    The FLUENT and FLUENT/BFC computer programs have been used to numerically model turbulent flow through orifice meters. These simulations were based on solution of the Navier-Stokes equations incorporating a k-epsilon turbulence model. For ideal installations, trends in the discharge coefficient with Reynolds number, beta ratio, and surface roughness have been reproduced, and the value of the discharge coefficient has been computed to within 2 percent. Nonideal installations have also been simulated, including the effects of expanders, reducers, valves, and bends. Detailed modeling of flow through a bend has yielded results in good agreement with experimental data. The trend in discharge coefficient shifts for orifice meters downstream of bends has been predicted reasonably well.

  8. Mark IVA DSN 26-meter Subnet

    NASA Technical Reports Server (NTRS)

    Gordon, D. D.

    1984-01-01

    The Office of Space Tracking and Data Systems' Networks Consolidation Program (NCP), managed by the Jet Propulsion Laboratory (JPL), includes the implementation of a 26-meter Tracking and Communications Subnet as a part of the Mark IV A Deep Space Network (DSN). The incorporatin of this subnet into the DSN will contribute to the NCP goal of consolidating the two NASA ground tracking networks into one tracking network. The 26-meter Tracking and Communication Subnet was designed to provide the capability to support, at each Deep Space Communication Complex, the tracking and data communication requirements of the earth-orbital missions that cannot be supported by the Tracking and Data Relay Satellite System when it becomes operational. Implementation activities and planned capabilities of the subnet are discussed.

  9. SOLVENT DISPERSION AND FLOW METER CALCULATION RESULTS

    SciTech Connect

    Nash, C.; Fondeur, F.; Peters, T.

    2013-06-21

    Savannah River National Laboratory (SRNL) found that the dispersion numbers for the six combinations of CSSX:Next Generation Solvent (NGS) “blend” and pure NGS versus salt solution, caustic wash, and strip aqueous solutions are all good. The dispersion numbers are indications of processability with centrifugal contactors. A comparison of solvent physical and thermal properties shows that the Intek™ solvent flow meter in the plant has a reading biased high versus calibrated flow when NGS is used, versus the standard CSSX solvent. The flow meter, calibrated for CSSX solvent, is predicted to read 2.8 gpm of NGS in a case where the true flow of NGS is 2.16 gpm.

  10. Smart data acquisition system for utilities metering

    NASA Astrophysics Data System (ADS)

    Ileana, I.; Risteiu, M.; Tulbure, A.; Rusu, M.

    2009-01-01

    The paper approaches the task of automatically reading and recognition of registered data on the utility meters of the users and is a part of a more complex project of our team concerning the remote data acquisition from industrial processes. A huge amount of utility meters in our country is of mechanical type without remote acquiring facilities and as an intermediate solution we propose an intelligent optical acquisition system which will store the read values in desktop and mobile devices. The main requirements of such a system are: portability, data reading accuracy, fast processing and energy independence. The paper analyses several solutions (including Artificial Neural Networks approach) tested by our team and present the experimental results and our conclusions.

  11. Energy Theft in the Advanced Metering Infrastructure

    NASA Astrophysics Data System (ADS)

    McLaughlin, Stephen; Podkuiko, Dmitry; McDaniel, Patrick

    Global energy generation and delivery systems are transitioning to a new computerized "smart grid". One of the principle components of the smart grid is an advanced metering infrastructure (AMI). AMI replaces the analog meters with computerized systems that report usage over digital communication interfaces, e.g., phone lines. However, with this infrastructure comes new risk. In this paper, we consider adversary means of defrauding the electrical grid by manipulating AMI systems. We document the methods adversaries will use to attempt to manipulate energy usage data, and validate the viability of these attacks by performing penetration testing on commodity devices. Through these activities, we demonstrate that not only is theft still possible in AMI systems, but that current AMI devices introduce a myriad of new vectors for achieving it.

  12. Fuel cell membrane hydration and fluid metering

    DOEpatents

    Jones, Daniel O.; Walsh, Michael M.

    2003-01-01

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  13. Fuel cell membrane hydration and fluid metering

    DOEpatents

    Jones, Daniel O.; Walsh, Michael M.

    1999-01-01

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel in order to mix its respective portion of liquid water with the corresponding portion of the stream. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  14. Forty Meters from Entry to Victoria Crater

    NASA Technical Reports Server (NTRS)

    2007-01-01

    NASA's Mars Exploration Rover Opportunity used its navigation camera during the rover's 1,278th Martian day, or sol, (Aug. 28, 2007) to take the images combined into this view. The rover was perched at the lip of Victoria Crater, which is about 800 meters (one-half mile) in diameter.

    After assessment of possible routes for Opportunity to descend into the crater, the rover team selected a site farther to the right along the rim. That selected entry point lies near the ripple of bright soil visible just outside the crater near the top center of this scene. The driving distance for Opportunity from the Sol 1,278 viewpoint to the selected entry point is about 40 meters (about 130 feet).

    This view is presented as a cylindrical projection with geometric seam correction.

  15. Laser displacement meter application for milling diagnostics

    NASA Astrophysics Data System (ADS)

    Ryabov, Oleg; Mori, Kazuo; Kasashima, Nagayoshi

    1998-09-01

    This paper presents the application of a laser displacement meter for direct multi-purpose sensing of milling tool conditions. Using a laser displacement meter, a laser beam is projected onto the cutting tool and subsequently reflected. The intensity as well as the angle of the reflected beam are measured. The signals are interpreted for identification of tool geometry, tool whirling, or vibration. Signal processing and analysis depend on the application. A prototype system has been developed to demonstrate the feasibility of various applications, namely (1) tool setting evaluation, (2) in-process measurement of milling cutter geometry and detection of tool failure, (3) continuous monitoring of milling cutter deterioration, (4) detection and measurement of chatter in milling, (5) measurement of milling tool bending and (6) thermal expansion.

  16. From Smart Metering to Smart Grid

    NASA Astrophysics Data System (ADS)

    Kukuča, Peter; Chrapčiak, Igor

    2016-06-01

    The paper deals with evaluation of measurements in electrical distribution systems aimed at better use of data provided by Smart Metering systems. The influence of individual components of apparent power on the power loss is calculated and results of measurements under real conditions are presented. The significance of difference between the traditional and the complex evaluation of the electricity consumption efficiency by means of different definitions of the power factor is illustrated.

  17. Fuel metering apparatus for a carburetor

    SciTech Connect

    Regueiro, J.F.

    1981-05-26

    An improved fuel metering apparatus for a carburetor is disclosed which provides an optimum air/fuel ratio at all engine speeds and loads. The air/fuel ratio is adjusted by means of a valve sensitive to intake manifold pressure which modulates the amount of bleed air mixed with the fuel prior to the aerated fuel being introduced into the venturi throat of the carburetor.

  18. Route Optimization for Offloading Congested Meter Fixes

    NASA Technical Reports Server (NTRS)

    Xue, Min; Zelinski, Shannon

    2016-01-01

    The Optimized Route Capability (ORC) concept proposed by the FAA facilitates traffic managers to identify and resolve arrival flight delays caused by bottlenecks formed at arrival meter fixes when there exists imbalance between arrival fixes and runways. ORC makes use of the prediction capability of existing automation tools, monitors the traffic delays based on these predictions, and searches the best reroutes upstream of the meter fixes based on the predictions and estimated arrival schedules when delays are over a predefined threshold. Initial implementation and evaluation of the ORC concept considered only reroutes available at the time arrival congestion was first predicted. This work extends previous work by introducing an additional dimension in reroute options such that ORC can find the best time to reroute and overcome the 'firstcome- first-reroute' phenomenon. To deal with the enlarged reroute solution space, a genetic algorithm was developed to solve this problem. Experiments were conducted using the same traffic scenario used in previous work, when an arrival rush was created for one of the four arrival meter fixes at George Bush Intercontinental Houston Airport. Results showed the new approach further improved delay savings. The suggested route changes from the new approach were on average 30 minutes later than those using other approaches, and fewer numbers of reroutes were required. Fewer numbers of reroutes reduce operational complexity and later reroutes help decision makers deal with uncertain situations.

  19. A study of the Lute Metering Structure

    NASA Technical Reports Server (NTRS)

    Foreman, James W.

    1992-01-01

    Two Metering Structure configurations were investigated. The first case was the traditional style metering structure which is larger than the outside diameter of the primary mirror. The second case investigated was the center support concept in which the outside diameter of the structure is less than the inside diameter of the primary mirror. Beryllium was used as the baseline material for this study. Four other materials were considered as candidates for the metering structure. These materials are: Graphite Epoxy, Aluminum, Titanium, and Invar. The loading conditions used for this study were estimated to be: Quasi Static: 6.0 G (all three directions); and Random Vibration: 30.0 G (applied 1 axis at a time). Taking advantage of symmetry, it was necessary to apply the lateral loading to only one axis. These loads were applied to both concepts and to all material configurations. The loadings as described above were based on the best available information and is felt to be adequate for this study since it was consistently used for all configurations. A load factor 2.00 was applied to both quasi static and random vibration loads. The allowable stresses are conservatively based yield strength of the material, except for the struts which are controlled by elastic stability. The stresses determined from each individual loading direction were conservatively combined by the absolute sum method.

  20. A study of the Lute Metering Structure

    NASA Astrophysics Data System (ADS)

    Foreman, James W.

    1992-12-01

    Two Metering Structure configurations were investigated. The first case was the traditional style metering structure which is larger than the outside diameter of the primary mirror. The second case investigated was the center support concept in which the outside diameter of the structure is less than the inside diameter of the primary mirror. Beryllium was used as the baseline material for this study. Four other materials were considered as candidates for the metering structure. These materials are: Graphite Epoxy, Aluminum, Titanium, and Invar. The loading conditions used for this study were estimated to be: Quasi Static: 6.0 G (all three directions); and Random Vibration: 30.0 G (applied 1 axis at a time). Taking advantage of symmetry, it was necessary to apply the lateral loading to only one axis. These loads were applied to both concepts and to all material configurations. The loadings as described above were based on the best available information and is felt to be adequate for this study since it was consistently used for all configurations. A load factor 2.00 was applied to both quasi static and random vibration loads. The allowable stresses are conservatively based yield strength of the material, except for the struts which are controlled by elastic stability. The stresses determined from each individual loading direction were conservatively combined by the absolute sum method.

  1. Class Trash.

    ERIC Educational Resources Information Center

    Chemecology, 1992

    1992-01-01

    Presents a classroom activity in which students calculate the amount and types of trash thrown out by their class at school to investigate how much trash is generated, where it goes, and speculate about alternatives. Students need to be familiar with the concepts of weight, volume, and numbers. (MCO)

  2. Intravenous fluid flow meter concept for zero gravity environment

    NASA Technical Reports Server (NTRS)

    Miller, C. G.

    1972-01-01

    Measuring chamber, included in infusion-set tubing, and peristaltic flow meter concept can be incorporated into flow meter that measures fluid flow rates between 100 and 600 cu cm per hour and at the same time maintains sterilization.

  3. SERO sites use prioritization tool to meet metering requirements

    SciTech Connect

    Solana, Amy E.; Sullivan, Gregory P.

    2006-09-01

    This article describes PNNL's effort to develop and implement a standardized methodology to meet the EPAct 2005 metering requirements at federal sites and to assist Southeast Regional Office sites in selecting and then prioritizing buildings to be metered.

  4. Transit time ultrasonic flow meters for natural gas measurement

    SciTech Connect

    Upp, E.L.; Warner, K.L.

    1996-12-31

    Transit-time ultrasonic flow meters for gas have gained a larger acceptance within the natural gas industry in recent years, and are now an option for custody transfer metering in several countries. Additionally, there are several varieties of less expensive transit-time ultrasonic flow meters which are excellent in check metering applications although limited in accuracy. The proper choice of ultrasonic flow meter normally depends on the absolute accuracy required, with the multipath configuration offering the best accuracy. Ultrasonic flow meters must be properly installed and the natural gas must be of good quality to achieve an accurate measurement, as with any type of gas flow meter. As experience grows within the measurement community, the use and applications for transit-time ultrasonic flow meters may expand greatly.

  5. Measurement of large liquid volumes by turbine meters

    SciTech Connect

    Jakubenas, P.P.

    1996-09-01

    Traditionally the petroleum industry has used turbine meters for custody transfer measurement of large volumes of low viscosity products, but more recently, the trend is to apply turbine meters to higher viscosity fluids particularly crude oils. This trend is to a great extent prompted by analysis of initial capital outlay only, rather than considering total cost of ownership, as the initial cost of the turbine meter itself is considerably less than a positive displacement meter of equal flow capacity. However, another reason why the trend is continuing is related to technological advances. This paper will address meter selection basics, turbine meter theory and the recent technological advances that may permit the use of turbine meters for applications for which heretofore they could not be considered. Also the difficult to identify operational costs that may occur when using large turbine meters on high viscosity products will be discussed.

  6. Measurement of large liquid volumes by turbine meters

    SciTech Connect

    Jakubenas, P.P.

    1995-12-01

    Traditionally the petroleum industry has used turbine meters for custody transfer measurement of large volumes of low viscosity products, but more recently, the trend is to apply turbine meters to higher viscosity fluids particularly crude oils. This trend is to a great extent prompted by analysis of initial capital outlay only, rather than considering total cost of ownership, as the initial cost of the turbine meter itself is considerably less than a positive displacement meter of equal flow capacity. However another reason why the trend is continuing is related to technological advances. This paper will address meter selection basics, turbine meter theory and the recent technological advances that may permit the use of turbine meters for applications for which heretofore they could not be considered. Also the difficult to identify operational costs that may occur when using large turbine meters on high viscosity products will be discussed.

  7. 7 CFR 801.6 - Tolerances for moisture meters.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat Mid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat High ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter...

  8. 7 CFR 801.6 - Tolerances for moisture meters.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat Mid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat High ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter...

  9. 7 CFR 801.6 - Tolerances for moisture meters.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat Mid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat High ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter...

  10. 7 CFR 801.6 - Tolerances for moisture meters.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat Mid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat High ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter...

  11. 7 CFR 801.6 - Tolerances for moisture meters.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat Mid ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter wheat High ±0.05 percent moisture, mean deviation from National standard moisture meter using Hard Red Winter...

  12. 21 CFR 868.1780 - Inspiratory airway pressure meter.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Inspiratory airway pressure meter. 868.1780... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1780 Inspiratory airway pressure meter. (a) Identification. An inspiratory airway pressure meter is a device used to measure the...

  13. 21 CFR 868.1780 - Inspiratory airway pressure meter.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Inspiratory airway pressure meter. 868.1780... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1780 Inspiratory airway pressure meter. (a) Identification. An inspiratory airway pressure meter is a device used to measure the...

  14. 21 CFR 868.1780 - Inspiratory airway pressure meter.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Inspiratory airway pressure meter. 868.1780... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1780 Inspiratory airway pressure meter. (a) Identification. An inspiratory airway pressure meter is a device used to measure the...

  15. 21 CFR 868.1780 - Inspiratory airway pressure meter.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Inspiratory airway pressure meter. 868.1780... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1780 Inspiratory airway pressure meter. (a) Identification. An inspiratory airway pressure meter is a device used to measure the...

  16. 21 CFR 868.1780 - Inspiratory airway pressure meter.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Inspiratory airway pressure meter. 868.1780... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1780 Inspiratory airway pressure meter. (a) Identification. An inspiratory airway pressure meter is a device used to measure the...

  17. 26. CURRENT METERS WITH FOLDING SCALE (MEASURED IN INCHES) IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. CURRENT METERS WITH FOLDING SCALE (MEASURED IN INCHES) IN FOREGROUND: GURLEY MODEL NO. 665 AT CENTER, GURLEY MODEL NO. 625 'PYGMY' CURRENT METER AT LEFT, AND WES MINIATURE PRICE-TYPE CURRENT METER AT RIGHT. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

  18. 25. CURRENT METERS: GURLEY MODEL NO. 665 AT CENTER, GURLEY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. CURRENT METERS: GURLEY MODEL NO. 665 AT CENTER, GURLEY MODEL NO. 625 'PYGMY' CURRENT METER AT LEFT, AND WES MINIATURE PRICE-TYPE CURRENT METER AT RIGHT. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

  19. 40 CFR 1065.230 - Raw exhaust flow meter.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... involve a laminar flow element or a thermal-mass meter. Note that your overall system for measuring raw... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Raw exhaust flow meter. 1065.230... flow meter. (a) Application. You may use measured raw exhaust flow, as follows: (1) Use the...

  20. 40 CFR 1065.230 - Raw exhaust flow meter.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... flow meter. (a) Application. You may use measured raw exhaust flow, as follows: (1) Use the actual... the following cases, you may use a raw exhaust flow meter signal that does not give the actual value... consumed. (b) Component requirements. We recommend that you use a raw-exhaust flow meter that meets...

  1. 40 CFR 1065.225 - Intake-air flow meter.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... flow meter. (a) Application. You may use an intake-air flow meter in combination with a chemical... as described in § 1065.667. (2) In the following cases, you may use an intake-air flow meter signal...-specific fuel consumption and fuel consumed. (b) Component requirements. We recommend that you use...

  2. 40 CFR 1065.230 - Raw exhaust flow meter.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... flow meter. (a) Application. You may use measured raw exhaust flow, as follows: (1) Use the actual... the following cases, you may use a raw exhaust flow meter signal that does not give the actual value... consumed. (b) Component requirements. We recommend that you use a raw-exhaust flow meter that meets...

  3. 40 CFR 1065.230 - Raw exhaust flow meter.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... flow meter. (a) Application. You may use measured raw exhaust flow, as follows: (1) Use the actual... the following cases, you may use a raw exhaust flow meter signal that does not give the actual value... consumed. (b) Component requirements. We recommend that you use a raw-exhaust flow meter that meets...

  4. 40 CFR 1065.230 - Raw exhaust flow meter.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... flow meter. (a) Application. You may use measured raw exhaust flow, as follows: (1) Use the actual... the following cases, you may use a raw exhaust flow meter signal that does not give the actual value... consumed. (b) Component requirements. We recommend that you use a raw-exhaust flow meter that meets...

  5. Integrating an Embedded System within a Microwave Moisture Meter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In this paper, the conversion of a PC or laptop-controlled microwave moisture meter to a stand-alone meter hosting its own embedded system is discussed. The moisture meter uses low-power microwaves to measure the attenuation and phase shift of the sample, from which the dielectric properties are cal...

  6. Integrating an embedded system in a microwave moisture meter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The conversion of a PC- or laptop-controlled microwave moisture meter to a stand-alone meter hosting its own embedded system is discussed. The moisture meter measures the attenuation and phase shift of low power microwaves traversing the sample, from which the dielectric properties are calculated. T...

  7. 24 CFR 965.401 - Individually metered utilities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Individually metered utilities. 965... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Individual Metering of Utilities for Existing PHA-Owned Projects § 965.401 Individually metered utilities. (a) All utility service shall...

  8. 49 CFR 192.357 - Customer meters and regulators: Installation.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meters and regulators: Installation....

  9. 49 CFR 192.359 - Customer meter installations: Operating pressure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meter installations: Operating...

  10. Contemporary flow meters: an assessment of their accuracy and reliability.

    PubMed

    Christmas, T J; Chapple, C R; Rickards, D; Milroy, E J; Turner-Warwick, R T

    1989-05-01

    The accuracy, reliability and cost effectiveness of 5 currently marketed flow meters have been assessed. The mechanics of each meter is briefly described in relation to its accuracy and robustness. The merits and faults of the meters are discussed and the important features of flow measurements that need to be taken into account when making diagnostic interpretations are emphasised.

  11. Custody transfer metering performance for turbine and positive displacement meters on batched crude oil pipelines

    SciTech Connect

    Gallagher, J.E.; Coats, J.R.; Butts, H.W.; LaNasa, P.J.

    1995-12-31

    The USA pipeline grid is quickly migrating from transporting low viscosity crude oils to large volumes of moderate to high viscosity crude oils. As a result, the challenges associated with custody transfer, loss control and line integrity have been brought to a new level. To assist in these challenges, an evaluation was undertaken on three flowmeters on a batched crude oil pipeline. A series of experiments are currently underway to evaluate the performance of a conventional turbine meter, a dual bladed helical turbine meter and a capillary seal positive displacement meter over a wide range of transport properties. The goal of this program is to assist the Northern American pipeline industry in determining economically acceptable alternatives in the handling of ever increasing high viscosity crude oils.

  12. NUCLEAR MIXING METERS FOR CLASSICAL NOVAE

    SciTech Connect

    Kelly, Keegan J.; Iliadis, Christian; Downen, Lori; Champagne, Art; José, Jordi

    2013-11-10

    Classical novae are caused by mass transfer episodes from a main-sequence star onto a white dwarf via Roche lobe overflow. This material possesses angular momentum and forms an accretion disk around the white dwarf. Ultimately, a fraction of this material spirals in and piles up on the white dwarf surface under electron-degenerate conditions. The subsequently occurring thermonuclear runaway reaches hundreds of megakelvin and explosively ejects matter into the interstellar medium. The exact peak temperature strongly depends on the underlying white dwarf mass, the accreted mass and metallicity, and the initial white dwarf luminosity. Observations of elemental abundance enrichments in these classical nova events imply that the ejected matter consists not only of processed solar material from the main-sequence partner but also of material from the outer layers of the underlying white dwarf. This indicates that white dwarf and accreted matter mix prior to the thermonuclear runaway. The processes by which this mixing occurs require further investigation to be understood. In this work, we analyze elemental abundances ejected from hydrodynamic nova models in search of elemental abundance ratios that are useful indicators of the total amount of mixing. We identify the abundance ratios ΣCNO/H, Ne/H, Mg/H, Al/H, and Si/H as useful mixing meters in ONe novae. The impact of thermonuclear reaction rate uncertainties on the mixing meters is investigated using Monte Carlo post-processing network calculations with temperature-density evolutions of all mass zones computed by the hydrodynamic models. We find that the current uncertainties in the {sup 30}P(p, γ){sup 31}S rate influence the Si/H abundance ratio, but overall the mixing meters found here are robust against nuclear physics uncertainties. A comparison of our results with observations of ONe novae provides strong constraints for classical nova models.

  13. Temperature Stability of the Sky Quality Meter

    PubMed Central

    Schnitt, Sabrina; Ruhtz, Thomas; Fischer, Jürgen; Hölker, Franz; Kyba, Christopher C.M.

    2013-01-01

    The stability of radiance measurements taken by the Sky Quality Meter (SQM) was tested under rapidly changing temperature conditions during exposure to a stable light field in the laboratory. The reported radiance was found to be negatively correlated with temperature, but remained within 7% of the initial reported radiance over a temperature range of −15°C to 35°C, and during temperature changes of −33°C/h and +70°C/h. This is smaller than the manufacturer's quoted unit-to-unit systematic uncertainty of 10%, indicating that the temperature compensation of the SQM is adequate under expected outdoor operating conditions. PMID:24030682

  14. Ion Drift Meter for Dynamics Explorer

    NASA Technical Reports Server (NTRS)

    Heelis, R. A.; Hanson, W. B.; Lippincott, C. R.; Zuccaro, D. R.

    1982-01-01

    The ion drift meter for Dynamics Explorer B is discussed. It measures two mutually perpendicular angles of arrival of thermal ions with respect to the sensor look directions. These angles lie in the vertical and horizontal planes and may be thought of as pitch and yaw in the conventional aerodynamic sense. The components of the ion drift velocity along vertical and horizontal axes through the spacecraft body are derived to first order from knowledge of the spacecraft velocity vector and more accurately with additional knowledge of the component of ion drift along the sensor look direction.

  15. Temperature stability of the sky quality meter.

    PubMed

    Schnitt, Sabrina; Ruhtz, Thomas; Fischer, Jürgen; Hölker, Franz; Kyba, Christopher C M

    2013-01-01

    The stability of radiance measurements taken by the Sky Quality Meter (SQM)was tested under rapidly changing temperature conditions during exposure to a stable light field in the laboratory. The reported radiance was found to be negatively correlated with temperature, but remained within 7% of the initial reported radiance over a temperature range of -15 °C to 35 °C, and during temperature changes of -33 °C/h and +70 °C/h.This is smaller than the manufacturer's quoted unit-to-unit systematic uncertainty of 10%,indicating that the temperature compensation of the SQM is adequate under expected outdoor operating conditions. PMID:24030682

  16. A new model for the V-Cone meter in low pressure wet gas metering

    NASA Astrophysics Data System (ADS)

    He, Denghui; Bai, Bofeng; Xu, Yong; Li, Xing

    2012-12-01

    Wet gas metering with differential pressure (DP) devices (e.g. the orifice plate, the Venturi and the V-Cone) has gained increasing interest in the oil and gas industry. Many investigations have been performed and several models have been proposed. Among the DP devices, the V-Cone flow meter has received increasing attention owing to its remarkable performance characteristics, including high accuracy, excellent repeatability, wide turndowns, shorter straight length and stable signals. In this work, we developed a new method for predicting the gas flow rate in low pressure wet gas flow using a V-Cone flow meter with the diameter ratio of 0.55. The experimental fluid was air and tap water. The test pressure ranged from 0.10 to 0.48 MPa, and the gas and liquid mass flow rates ranged from 100 to 500 N m3 h-1 and from 0.030 to 0.358 m3 h-1, respectively. Thus, the Lockhart-Martinelli parameter, XLM, was up to 0.158 and the gas volume fraction ranged from 98.94% to 100%. A dimensionless parameter, K, was proposed in this work and defined as the two-phase flow coefficient of the flow meter. The results indicated that the K linearly increased with the Lockhart-Martinelli parameter. In addition, the K increased with the gas densiometric Froude number and decreased with the operating pressure when other parameters were kept constant. On the basis of the two-phase flow coefficient, a new wet gas model was developed and compared with seven popular wet gas models. It was found that with the V-Cone flow meter and under the present experimental conditions the new model produced a more accurate prediction of the wet gas than other models. The research approach to obtaining the model can also be used in the studies on other DP devices and thus will benefit the design of wet gas meters.

  17. Calibration and maintenance of vertical-axis type current meters

    USGS Publications Warehouse

    Smoot, George F.; Novak, Charles E.

    1968-01-01

    The purpose of this chapter is to describe the procedures used in the manufacture and calibration of current meters and to present in detail information pertinent to their proper maintenance and repair. Recent intensive studies on the calibration of current meters and the effects of wear of the component parts on the performance of the meters have led to the adoption of new procedures for the manufacture, calibration, maintenance, and repair of meters. This chapter, therefore, updates the provisional manual 'Care and Rating of Current Meters' (1957) by including these new procedures.

  18. Microcomputerized electric field meter diagnostic and calibration system

    NASA Technical Reports Server (NTRS)

    Holley, L. D.; Mason, J. W. (Inventor)

    1978-01-01

    A computerized field meter calibration system which includes an apparatus for testing the calibration of field meters normally utilized for measuring electromagnetic field potentials is described. A reference voltage is applied to the field meter for causing signals to be produced on the output terminals thereof. A bank of relays is provided for selectively connecting output terminals of the field meter to a multiplexer by means of a digital voltmeter and an oscilloscope. A frequency-shift-keyed receiver is also connected to one of the terminals of the field meter for transmitting and converting a frequency shift keyed signal to a digital signal which is, subsequently, applied to the multiplexer.

  19. Automatic ranging circuit for a digital panel meter

    DOEpatents

    Mueller, Theodore R.; Ross, Harley H.

    1976-01-01

    This invention relates to a range changing circuit that operates in conjunction with a digital panel meter of fixed sensitivity. The circuit decodes the output of the panel meter and uses that information to change the gain of an input amplifier to the panel meter in order to insure that the maximum number of significant figures is always displayed in the meter. The circuit monitors five conditions in the meter and responds to any of four combinations of these conditions by means of logic elements to carry out the function of the circuit.

  20. Evidence for a High-Pressure Phase Transition of ε-2,4,6,8,10,12-hexanitrohexaazaisowurtzitane (CL-20) Using Vibrational Spectroscopy

    SciTech Connect

    Ciezak, J.; Jenkins, T; Liu, Z

    2007-01-01

    The high-pressure response of {epsilon}-2,4,6,8,10,12-hexanitrohexaazaisowurtizane (CL-20) has been examined to 27 GPa in diamond anvil cells using vibrational spectroscopy. The results reveal evidence of an {epsilon}{yields}{Upsilon} pressure-induced phase transition between 4.1 and 6.4 GPa and suggest the existence of a {Upsilon}{yields}{zeta} transition near 18.7 GPa. Several Raman and infrared frequencies were found to decrease in intensity as the phase boundaries are approached. An anomalous intensity increase was noted in the C-N-C infrared mode that is believed to result from an increase in the Raman cross-section due to a stronger interlayer coupling under pressure.

  1. The parent-rated social skills of a sample of New York City preschool children 8-10 months after September 11, 2001.

    PubMed

    Yasik, Anastasia E; Saigh, Philip A; Mitchell, Pamela; Abright, A Reese

    2010-01-01

    This study compared the Social Skills Rating System-Preschool Parent Version ratings of two groups of New York City preschool children 8-10 months after September 11, 2001. One group of children was within 1 mile (1.61 km) of the World Trade Center (WTC) during the attack and exposed to one or more traumatic events. The second group was 2.04 to 14 miles (3.28-22.54 km) away from the WTC and not exposed to traumatic events. The social skills ratings of the comparison groups did not significantly differ These outcomes were consistent after statistically adjusting for the potentially confounding influence of parental PTSD, anxiety, and depression symptoms. PMID:21870383

  2. Critical behavior and its correlation with magnetocaloric effect in amorphous Fe80-xVxB12Si8 (x=8, 10 and 13.7) alloys

    NASA Astrophysics Data System (ADS)

    Boutahar, A.; Lassri, H.; Hlil, E. K.; Fruchart, D.

    2016-01-01

    The critical exponents in Fe80-xVxB12Si8 (x=8, 10 and 13.7) amorphous alloys were investigated near ferromagnetic to paramagnetic phase transition temperature. All amorphous alloys exhibit a second order ferromagnetic to paramagnetic phase transition (SOMT). The critical exponents (β, γ and δ) were estimated using the modified Arrott plot technique (MAP), the Widom scaling relation (WSR), and the critical isotherm analysis (CIA). In addition, an independent analysis of the critical behavior is presented in terms of the magnetocaloric effect (MCE). It shows in accordance with conclusion from magnetization data analysis. The estimated critical exponent values are found to be consistent and comparable to those predicted by the mean field model. This result points out to the ferromagnetic exchange interaction of long-range type.

  3. Tmprss3, a Transmembrane Serine Protease Deficient in Human DFNB8/10 Deafness, Is Critical for Cochlear Hair Cell Survival at the Onset of Hearing*

    PubMed Central

    Fasquelle, Lydie; Scott, Hamish S.; Lenoir, Marc; Wang, Jing; Rebillard, Guy; Gaboyard, Sophie; Venteo, Stéphanie; François, Florence; Mausset-Bonnefont, Anne-Laure; Antonarakis, Stylianos E.; Neidhart, Elizabeth; Chabbert, Christian; Puel, Jean-Luc; Guipponi, Michel; Delprat, Benjamin

    2011-01-01

    Mutations in the type II transmembrane serine protease 3 (TMPRSS3) gene cause non-syndromic autosomal recessive deafness (DFNB8/10), characterized by congenital or childhood onset bilateral profound hearing loss. In order to explore the physiopathology of TMPRSS3 related deafness, we have generated an ethyl-nitrosourea-induced mutant mouse carrying a protein-truncating nonsense mutation in Tmprss3 (Y260X) and characterized the functional and histological consequences of Tmprss3 deficiency. Auditory brainstem response revealed that wild type and heterozygous mice have normal hearing thresholds up to 5 months of age, whereas Tmprss3Y260X homozygous mutant mice exhibit severe deafness. Histological examination showed degeneration of the organ of Corti in adult mutant mice. Cochlear hair cell degeneration starts at the onset of hearing, postnatal day 12, in the basal turn and progresses very rapidly toward the apex, reaching completion within 2 days. Given that auditory and vestibular deficits often co-exist, we evaluated the balancing abilities of Tmprss3Y260X mice by using rotating rod and vestibular behavioral tests. Tmprss3Y260X mice effectively displayed mild vestibular syndrome that correlated histologically with a slow degeneration of saccular hair cells. In situ hybridization in the developing inner ear showed that Tmprss3 mRNA is localized in sensory hair cells in the cochlea and the vestibule. Our results show that Tmprss3 acts as a permissive factor for cochlear hair cells survival and activation at the onset of hearing and is required for saccular hair cell survival. This mouse model will certainly help to decipher the molecular mechanisms underlying DFNB8/10 deafness and cochlear function. PMID:21454591

  4. Effect of Training School Teachers on Oral Hygiene Status of 8-10 Years Old Government School Children of Udaipur City, India

    PubMed Central

    Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Singh, Anukriti; Shinde, Kushal; Gandhi, Neha; Doshi, Astha

    2016-01-01

    Introduction Provision of oral health knowledge to the children by their teachers at the school level can prove to be more fruitful because it is the time period during which the children begin to learn the basic oral hygiene practices and are most prone to dental caries. Aim This study was carried out to assess the effect of training school teachers on oral hygiene status of 8-10 years old government school children of Udaipur city, India. Materials and Methods A total of nine school teachers and 279, 8-10 year old school children from two government schools were included in the study. The questionnaire on oral health knowledge and practice contained 17 questions to evaluate the knowledge and practice of children towards oral hygiene before and after the teachers training program. Baseline and six months post training data on oral health knowledge and practice was obtained by the questionnaire method. Baseline and six months post training data on oral hygiene status was obtained by OHI-S Index. Statistical analysis was done using software SPSS 22, the test used were McNemar’s test, paired t-test. Results Pre and post training data were compared and it was found that there was a significant improvement in oral health knowledge and practices of school teachers and children. Also oral hygiene status of school children was significantly improved after the program. Conclusion Results of the present study suggest that experiential learning is an effective school based oral health education method for improvement of oral hygiene in primary school children. PMID:27656573

  5. Long Island Smart Metering Pilot Project

    SciTech Connect

    None, None

    2012-03-30

    The Long Island Power Authority (LIPA) Smart Meter Pilots provided invaluable information and experience for future deployments of Advanced Metering Infrastructure (AMI), including the deployment planned as part of LIPA's Smart Grid Demonstration Project (DE-OE0000220). LIPA will incorporate lessons learned from this pilot in future deployments, including lessons relating to equipment performance specifications and testing, as well as equipment deployment and tracking issues. LIPA ultimately deployed three AMI technologies instead of the two that were originally contemplated. This enabled LIPA to evaluate multiple systems in field conditions with a relatively small number of meter installations. LIPA experienced a number of equipment and software issues that it did not anticipate, including issues relating to equipment integration, ability to upgrade firmware and software over the air (as opposed to physically interacting with every meter), and logistical challenges associated with tracking inventory and upgrade status of deployed meters. In addition to evaluating the technology, LIPA also piloted new Time-of-Use (TOU) rates to assess customer acceptance of time-differentiated pricing and to evaluate whether customers would respond by adjusting their activities from peak to non-peak periods. LIPA developed a marketing program to educate customers who received AMI in the pilot areas and to seek voluntary participation in TOU pricing. LIPA also guaranteed participating customers that, for their initial year on the rates, their electricity costs under the TOU rate would not exceed the amount they would have paid under the flat rates they would otherwise enjoy. 62 residential customers chose to participate in the TOU rates, and every one of them saved money during the first year. 61 of them also elected to stay on the TOU rate without the cost guarantee at the end of that year. The customer who chose not to continue on the rate was also the one who achieved the

  6. Are 1,5- and 1,7-dihydrodiimidazo[4,5-b:4‧,5‧-e]pyrazine the main products of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) alkaline hydrolysis? A DFT study of vibrational spectra

    NASA Astrophysics Data System (ADS)

    Kholod, Yana; Okovytyy, Sergiy; Kuramshina, Gulnara; Qasim, Mohammad; Gorb, Leonid; Furey, John; Honea, Patricia; Fredrickson, Herbert; Leszczynski, Jerzy

    2006-08-01

    The fully optimized geometries and force fields of the most stable conformation of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane and two tautomers 1,5- and 1,7-dihydrodiimidazo[4,5- b:4',5'- e]pyrazine were obtained at the B3LYP level of hybrid density functional theory with the 6-31G(d) basis set. The vibrational frequencies were calculated by scaling of force fields, and the vibrational spectra were interpreted taking into account potential energy distributions. DFT calculations provide good agreement between calculated and experimental vibrational frequencies, obtained for CL-20. The theoretical vibrational spectra of 1,5- and 1,7-dihydrodiimidazo[4,5- b:4',5'- e]pyrazine correspond to the experimental FTIR spectrum obtained for the CL-20 alkaline hydrolysis products.

  7. Class distinction

    NASA Astrophysics Data System (ADS)

    White, M. Catherine

    Typical 101 courses discourage many students from pursuing higher level science and math courses. Introductory classes in science and math serve largely as a filter, screening out all but the most promising students, and leaving the majority of college graduates—including most prospective teachers—with little understanding of how science works, according to a study conducted for the National Science Foundation. Because few teachers, particularly at the elementary level, experience any collegiate science teaching that stresses skills of inquiry and investigation, they simply never learn to use those methods in their teaching, the report states.

  8. Two laboratory methods for the calibration of GPS speed meters

    NASA Astrophysics Data System (ADS)

    Bai, Yin; Sun, Qiao; Du, Lei; Yu, Mei; Bai, Jie

    2015-01-01

    The set-ups of two calibration systems are presented to investigate calibration methods of GPS speed meters. The GPS speed meter calibrated is a special type of high accuracy speed meter for vehicles which uses Doppler demodulation of GPS signals to calculate the measured speed of a moving target. Three experiments are performed: including simulated calibration, field-test signal replay calibration, and in-field test comparison with an optical speed meter. The experiments are conducted at specific speeds in the range of 40-180 km h-1 with the same GPS speed meter as the device under calibration. The evaluation of measurement results validates both methods for calibrating GPS speed meters. The relative deviations between the measurement results of the GPS-based high accuracy speed meter and those of the optical speed meter are analyzed, and the equivalent uncertainty of the comparison is evaluated. The comparison results justify the utilization of GPS speed meters as reference equipment if no fewer than seven satellites are available. This study contributes to the widespread use of GPS-based high accuracy speed meters as legal reference equipment in traffic speed metrology.

  9. Radiofrequency energy exposure from the Trilliant smart meter.

    PubMed

    Foster, Kenneth R; Tell, Richard A

    2013-08-01

    This paper reviews radiofrequency (RF) field levels produced by electric utility meters equipped with RF transceivers (so-called Smart Meters), focusing on meters from one manufacturer (Trilliant, Redwood City, CA, USA, and Granby, QC, Canada). The RF transmission levels are summarized based on publicly available data submitted to the U.S. Federal Communications Commission supplemented by limited independent measurements. As with other Smart Meters, this meter incorporates a low powered radiofrequency transceiver used for a neighborhood mesh network, in the present case using ZigBee-compliant physical and medium access layers, operating in the 2.45 GHz unlicensed band but with a proprietary network architecture. Simple calculations based on a free space propagation model indicate that peak RF field intensities are in the range of 10 mW m or less at a distance of more than 1-2 m from the meters. However, the duty cycle of transmission from the meters is very low (< 1%). Limited measurements identified pulses from the meter that were consistent with data reported by the vendor to the U.S. Federal Communications Commission. Limited measurements conducted in two houses with the meters were unable to clearly distinguish emissions from the meters from the considerable electromagnetic clutter in the same frequency range from other sources, including Wi-Fi routers and, when it was activated, a microwave oven. These preliminary measurements disclosed the difficulties that would be encountered in characterizing the RF exposures from these meters in homes in the face of background signals from other household devices in the same frequency range. An appendix provides an introduction to Smart Meter technology. The RF transmitters in wireless-equipped Smart Meters operate at similar power levels and in similar frequency ranges as many other digital communications devices in common use, and their exposure levels are very far below U.S. and international exposure limits. PMID

  10. Radiofrequency energy exposure from the Trilliant smart meter.

    PubMed

    Foster, Kenneth R; Tell, Richard A

    2013-08-01

    This paper reviews radiofrequency (RF) field levels produced by electric utility meters equipped with RF transceivers (so-called Smart Meters), focusing on meters from one manufacturer (Trilliant, Redwood City, CA, USA, and Granby, QC, Canada). The RF transmission levels are summarized based on publicly available data submitted to the U.S. Federal Communications Commission supplemented by limited independent measurements. As with other Smart Meters, this meter incorporates a low powered radiofrequency transceiver used for a neighborhood mesh network, in the present case using ZigBee-compliant physical and medium access layers, operating in the 2.45 GHz unlicensed band but with a proprietary network architecture. Simple calculations based on a free space propagation model indicate that peak RF field intensities are in the range of 10 mW m or less at a distance of more than 1-2 m from the meters. However, the duty cycle of transmission from the meters is very low (< 1%). Limited measurements identified pulses from the meter that were consistent with data reported by the vendor to the U.S. Federal Communications Commission. Limited measurements conducted in two houses with the meters were unable to clearly distinguish emissions from the meters from the considerable electromagnetic clutter in the same frequency range from other sources, including Wi-Fi routers and, when it was activated, a microwave oven. These preliminary measurements disclosed the difficulties that would be encountered in characterizing the RF exposures from these meters in homes in the face of background signals from other household devices in the same frequency range. An appendix provides an introduction to Smart Meter technology. The RF transmitters in wireless-equipped Smart Meters operate at similar power levels and in similar frequency ranges as many other digital communications devices in common use, and their exposure levels are very far below U.S. and international exposure limits.

  11. Use supercompressibility as a meter correction factor

    SciTech Connect

    Nelson, M.B.

    1982-09-01

    Describes how, in the range of conditions experienced in the natural gas industry, the actual density of the gas volume measured is greater than the theoretical density related to Boyle's Law, and explains how the supercompressibility factor can correct this deviation. Northern States Power decided to apply supercompressibility as part of billing procedures after a study showed that if only customers with meter pressures of 20 psig and greater had the factor applied, 95.5% of the gas that is not being accounted for would be recovered. Supercompressibility as a function of gas composition, gas pressure, and temperature indicates the empirical relationship that relates the factor to the ideal gas laws. For normal compositions of natural gas, supercompressibility can be related to the gravity of the gas, taking into account mole fractions of CO/sub 2/ and N/sub 2/.

  12. Portable fluorescence meter for medical applications

    NASA Astrophysics Data System (ADS)

    Kornilin, Dmitriy V.; Grishanov, Vladimir N.

    2016-04-01

    Recently, there are great deals of skin fluorescence studies for diagnostic purposes in medicine. Measurement of the intensity of autofluorescence (AF) is suitable method for diagnostic, because it does not require traumatic procedures. Skin AF is widely used by doctors in order to assess the concentration of advanced glycation endproduct (AGE). There are no in vivo fluorescence meters made in Russia, which are affordable, portable, easy-to-use and easily replicable. This paper is devoted to study of the fluorimeter and its mathematical model of spectral characteristics that were developed by authors. Fluorimeter and its software are fully operational and they were given to doctors for testing in the real clinic conditions in order to get a set of AF statistics for patients.

  13. Commissioning subsystems of the 10 meter prototype

    NASA Astrophysics Data System (ADS)

    Prins, Nathan; Fricke, Tobin; Mow-Lowry, Conor; Hanke, Manuela

    2015-04-01

    The best attempts at detecting the elusive gravitational waves are with L-shaped interferometers. Over the summer of 2014, I helped install subsystems of the 10 meter prototype, a gravitational wave interferometer designed to reach the Standard Quantum Limit (SQL), at the Max Planck Institute for Gravitational Physics in Hannover, Germany through the University of Florida's International REU. While there, the frequency reference cavity was aligned and the mode matching the cavity began. We also worked on installing and testing the intensity stabilization servo, which consisted of an out-of-vacuum photodiode for each the in-loop and out-of-loop sensing that were being connected to the LIGO Control and Data System.

  14. Mobility at the scale of meters.

    PubMed

    Surovell, Todd A; O'Brien, Matthew

    2016-05-01

    When archeologists discuss mobility, we are most often referring to a phenomenon that operates on the scale of kilometers, but much of human mobility, at least if measured in terms of frequency of movement, occurs at much smaller scales, ranging from centimeters to tens of meters. Here we refer to the movements we make within the confines of our homes or places of employment. With respect to nomadic peoples, movements at this scale would include movements within campsites. Understanding mobility at small scales is important to archeology because small-scale mobility decisions are a critical factor affecting spatial patterning observed in archeological sites. In this paper, we examine the factors affecting small-scale mobility decisions in a Mongolian reindeer herder summer camp and the implications of those decisions with regard to archeological spatial patterning. PMID:27312186

  15. Logic elements for reactor period meter

    DOEpatents

    McDowell, William P.; Bobis, James P.

    1976-01-01

    Logic elements are provided for a reactor period meter trip circuit. For one element, first and second inputs are applied to first and second chopper comparators, respectively. The output of each comparator is O if the input applied to it is greater than or equal to a trip level associated with each input and each output is a square wave of frequency f if the input applied to it is less than the associated trip level. The outputs of the comparators are algebraically summed and applied to a bandpass filter tuned to f. For another element, the output of each comparator is applied to a bandpass filter which is tuned to f to give a sine wave of frequency f. The outputs of the filters are multiplied by an analog multiplier whose output is 0 if either input is 0 and a sine wave of frequency 2f if both inputs are a frequency f.

  16. Floating patterns of metered dose inhalers.

    PubMed

    Wolf, B L; Cochran, K R

    1997-01-01

    As long as metered dose inhalers have existed, patients have sought a reliable method to determine if a given canister was still potent. Concerning beta agonists, the answer to this question may be lifesaving. Issues of compliance have made dating canisters or counting doses impractical. Likewise, previous claims of floating characteristics are unreliable. In tap water, we float-tested 13 commonly used inhalers three times each, observing variations as they were incrementally actuated, emptying their contents. One essential pattern was observed. Almost all prescription-size canisters sink when full; all float by the time one-third of their contents is gone. Orientation of prescription-size canisters changes in a distinct pattern especially near 90% depletion. Sample-size canisters showed some variance. Results suggest that the pharmaceutical industry should include individual floating characteristics as part of the package insert as they provide a reproducible means of gauging contents.

  17. The ozone layer and metered dose inhalers.

    PubMed

    Boulet, L P

    1998-01-01

    The stratospheric ozone layer plays a crucial role in protecting living organisms against ultraviolet radiation. Chlorofluorocarbons (CFC) contained in metered-dose inhalers (MDIs) contribute to ozone depletion and in accordance with the Montreal Protocol on Substances That Deplete the Ozone Layer established 10 years ago, phase-out strageies have been developed worldwide for this category of agents. Alternatives to CFC-containing inhalers have been developed, such as powder inhalers and those using hydrofluoroalkanes (HFAs) as propellants, which have been shown to be as safe and effective as CFC-containing inhalers and even offer interesting advantages over older inhalers. The transition to non-CFC MDIs requires a major effort to make the new products available and to ensure adequate comparision with the previous ones. It also requires a harmonization of actions taken by industry, government, licencing bodies and patients or health professional associations to ensure adequate information and education to the public and respiratory care providers.

  18. Outdoors classes

    NASA Astrophysics Data System (ADS)

    Szymanska-Markowska, Barbara

    2016-04-01

    Why should students be trapped within the four walls of the classroom when there are a lot of ideas to have lessons led in the different way? I am not a fan of having lessons at school. For many students it is also boring to stay only at school, too. So I decided to organize workshops and trips to Universities or outdoors. I created KMO ( Discoverer's Club for Teenagers) at my school where students gave me some ideas and we started to make them real. I teach at school where students don't like science. I try hard to change their point of view about it. That's why I started to take parts in different competitions with my students. Last year we measured noise everywhere by the use of applications on a tablet to convince them that noise is very harmful for our body and us. We examined that the most harmful noises were at school's breaks, near the motorways and in the households. We also proved that acoustic screens, which were near the motorways, didn't protect us from noise. We measured that 30 meters from the screens the noise is the same as the motorway. We won the main prize for these measurements. We also got awards for calculating the costs of a car supplied by powered by a solar panel. We measured everything by computer. This year we decided to write an essay about trees and weather. We went to the forest and found the cut trees because we wanted to read the age of tree from the stump. I hadn't known earlier that we could read the weather from the tree's grain. We examined a lot of trees and we can tell that trees are good carriers of information about weather and natural disasters. I started studies safety education and I have a lot of ideas how to get my students interested in this subject that is similar to P.E., physics and chemistry, too. I hope that I will use my abilities from European Space Education Resource Office and GIFT workshop. I plan to use satellite and space to teach my students how they can check information about terrorism, floods or other

  19. De Minimis Thresholds for Federal Building Metering Appropriateness

    SciTech Connect

    Henderson, Jordan W.

    2015-03-31

    The U.S. Department of Energy (DOE) is required by statute and Presidential Memorandum to establish guidelines for agencies to meter their Federal buildings for energy (electricity, natural gas, and steam) and water. See 42 U.S.C. § 8253(e). DOE issued guidance in February 2006 on the installation of electric meters in Federal buildings. A recent update to the 2006 guidance accounts for more current metering practices within the Federal Government. The updated metering guidance specifies that all Federal buildings shall be considered “appropriate” for energy or water metering unless identified for potential exclusion. In developing the updated guidance to carry out the statue, Congress also directed DOE to (among other things) establish exclusions from the metering requirements based on the de minimis quantity of energy use of a Federal building, industrial process, or structure. This paper discusses the method used to identify de minimis values.

  20. Method and apparatus for reading meters from a video image

    DOEpatents

    Lewis, Trevor J.; Ferguson, Jeffrey J.

    1997-01-01

    A method and system to enable acquisition of data about an environment from one or more meters using video images. One or more meters are imaged by a video camera and the video signal is digitized. Then, each region of the digital image which corresponds to the indicator of the meter is calibrated and the video signal is analyzed to determine the value indicated by each meter indicator. Finally, from the value indicated by each meter indicator in the calibrated region, a meter reading is generated. The method and system offer the advantages of automatic data collection in a relatively non-intrusive manner without making any complicated or expensive electronic connections, and without requiring intensive manpower.

  1. Method and apparatus for reading meters from a video image

    SciTech Connect

    Lewis, T.J.; Ferguson, J.J.

    1995-12-31

    A method and system enable acquisition of data about an environment from one or more meters using video images. One or more meters are imaged by a video camera and the video signal is digitized. Then, each region of the digital image which corresponds to the indicator of the meter is calibrated and the video signal is analyzed to determine the value indicated by each meter indicator. Finally, from the value indicated by each meter indicator in the calibrated region, a meter reading is generated. The method and system offer the advantages of automatic data collection in a relatively non-intrusive manner without making any complicated or expensive electronic connections, and without requiring intensive manpower.

  2. Test procedures help ensure accuracy of orifice meters

    SciTech Connect

    Fillman, C.R.

    1996-07-01

    Orifice meter measurement with a chart recorder has been a standard in the petroleum industry for years. The meter consists of the plate/tube and recorder, requires minimal maintenance and can accurately measure a wide range of flow rates. It must be routinely tested to ensure sustained accuracy. The orifice meter measures differential pressure, static pressure, and temperature. However, the accuracy of the measurement is only as good as the calibration devices used in the test. A typical meter test consists of meter calibration, orifice plate inspection, quality of gas tests, and documentation (test report) to verify the data. The paper describes 19 steps that a gas technician can follow to conduct a thorough meter test.

  3. Outcomes of a school-based intervention (RESCATE) to improve physical activity patterns in Mexican children aged 8-10 years.

    PubMed

    Colín-Ramírez, E; Castillo-Martínez, L; Orea-Tejeda, A; Vergara-Castañeda, A; Keirns-Davis, C; Villa-Romero, A

    2010-12-01

    The aim of this study was to evaluate the impact of an intervention program on the patterns of physical activity in 8- to 10-year-old Mexican children from lower socioeconomic status. This study performed a randomized controlled field trial in 498 children aged 8-10 years from 10 public schools of low socioeconomic status in Mexico City. Schools were randomly assigned to intervention (n = 5) or control (n = 5) groups and followed up during 12 months. Physical and sedentary activities were assessed at the beginning of the program and after 6 and 12 months. At the end of follow-up, there was a significant increase in the performance of moderate physical activity (MPA) among children in intervention group who had not performed MPA at baseline any day of the week (40%, P = 0.04) but not in the control group (8%, P = not significant). The intervention group also showed a significant reduction in the proportion of children who spent more than 3 hours a day playing video games (from 23 to 13%, P = 0.01), while control group did not show significant changes. Given these findings, we conclude that intervention was able to modify positively physical activity and reduce time spent on such sedentary activities as video games among those at highest risk studied children.

  4. Dissociation of molecular chlorine in a Coulomb explosion: Potential curves, bound states, and deviation from Coulombic behavior for Cln+2 (n=2,3,4,6,8,10)

    NASA Astrophysics Data System (ADS)

    Wright, J. S.; Dilabio, G. A.; Matusek, D. R.; Corkum, P. B.; Ivanov, M. Yu.; Ellert, Ch.; Buenker, R. J.; Alekseyev, A. B.; Hirsch, G.

    1999-06-01

    Highly charged molecular ions are generated in Coulomb explosion experiments involving multielectron dissociative ionization, but little is known about the precise mechanisms involved in their formation. To help improve the understanding of such experiments, potential energy curves are calculated in this paper for diatomic chlorine (Cl2) and its ions Cln+2, where n=1,2,3,4,6,8,10. Bound vibrational states are obtained in three low-lying electronic states for Cl2+2 and one state for Cl3+2. Vertical excitation energies are given for stepwise excitations up to Cl10+2. For all the ions examined there is a significant energy defect (Δ) from the corresponding Coulomb potential, in one case reaching magnitudes of over 20 eV. We analyze the origin of these energy defects in terms of residual chemical bonding, and discuss the contribution of strongly bonding configurations at short internuclear distance. Finally, we present a simple physical model which describes the qualitative behavior of Δ(R,Q).

  5. Wavelength meter having single mode fiber optics multiplexed inputs

    DOEpatents

    Hackel, R.P.; Paris, R.D.; Feldman, M.

    1993-02-23

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  6. Wavelength meter having single mode fiber optics multiplexed inputs

    DOEpatents

    Hackel, Richard P.; Paris, Robert D.; Feldman, Mark

    1993-01-01

    A wavelength meter having a single mode fiber optics input is disclosed. The single mode fiber enables a plurality of laser beams to be multiplexed to form a multiplexed input to the wavelength meter. The wavelength meter can provide a determination of the wavelength of any one or all of the plurality of laser beams by suitable processing. Another aspect of the present invention is that one of the laser beams could be a known reference laser having a predetermined wavelength. Hence, the improved wavelength meter can provide an on-line calibration capability with the reference laser input as one of the plurality of laser beams.

  7. Procedures and equipment for field proving Coriolis meters

    SciTech Connect

    Apple, C.; Liu, K.T.; Shen, J.J.S.

    1995-12-31

    As one of the fastest growing flowmeter technologies, Coriolis meters are now gaining wider usage in the petroleum and petrochemical industries for custody transfer measurement. As with other traditional custody transfer flowmeters, periodic on-line proving of the Coriolis meter is required. At present, volumetric provers, such as conventional pipe provers and small volume provers, are regarded as the only practical means for flowmeter proving. Depending on how the Coriolis meter`s output is configured, proving techniques differ. In general, if a Coriolis meter is configured to provide mass flow output, an accurate fluid density during proving will need to be determined for volume-to-mass conversion calculations. If a Coriolis meter is configured to provide volumetric flow output, then the same proving procedure for conventional volumetric flowmeters can be adopted. This paper describes the procedures and associated equipment needed for field proving of Coriolis meters. Field proving data collected from several meter installations has shown acceptable proving repeatability and meter factor stability.

  8. Fisher Controls introduces Snug Meter to gas industry

    SciTech Connect

    Share, J.

    1996-04-01

    Spurred by an industry demanding a sleeker look that will appeal to consumers, Fisher Controls International inc., has introduced a compact natural gas meter that not only is considerably smaller than existing models, but also incorporates features that company officials feel may set new standards. Termed the Snug meter, the four-chamber device is particularly designed for multi-dwelling buildings and is also the initial foray of Fisher--a recognized leader in North America for pressure-control and regulation equipment--into the meter industry. This paper reviews the design features of this new meter.

  9. Performance characteristics of transit time ultrasonic flow meters

    SciTech Connect

    Freund, W.R. Jr.; Warner, K.L.

    1995-12-31

    Transit time ultrasonic flowmeters are increasingly being used in the measurement of natural gas flows. Multipath ultrasonic flowmeters are sufficiently accurate for custody transfer metering. The operating characteristics of these meters are explored by means of a model whose performance is linear with average velocity. Calibration of multipath ultrasonic flowmeters using chordal integration techniques can be accomplished with measurements of the geometry of the meter and delay times for the transducers. The effect of measurement errors in geometry and time on the performance curve of the meter are studied. Test results are given for 300 mm and 150 mm ultrasonic flowmeters.

  10. Preparing rotary and turbine meters demands precise testing

    SciTech Connect

    Lynne, R.O. Jr.

    1995-05-01

    Measurement accuracy impacts the bottom line and, amid today`s competition among fuels, it is a critical element in ensuring customer confidence, satisfaction and loyalty. Baltimore Gas and Electric`s (BGE) Gas Measurement Center`s primary responsibility is guaranteeing accurate, dependable billing information. BGE maintains more than 6,100 commercial/industrial rotary and turbine meter customers on its gas distribution system, with just over 5,700 line-mounted rotary meters, 450 foot-mounted rotary meters, and 59 turbine meters. This paper reviews the BGE in-service performance testing criteria along with the servicing procedures if needed.

  11. 5. DOWNSTREAM ELEVATION OF BRIDGE AND SUBSTRUCTURE (with graduated meter ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. DOWNSTREAM ELEVATION OF BRIDGE AND SUBSTRUCTURE (with graduated meter pole); VIEW TO NORTH-NORTHEAST. - Auwaiakeakua Bridge, Spanning Auwaiakekua Gulch at Mamalahoa Highway, Waikoloa, Hawaii County, HI

  12. 29. Detail view north showing amperage and voltage meters, operator's ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Detail view north showing amperage and voltage meters, operator's room, west operator's house. - Yellow Mill Bridge, Spanning Yellow Mill Channel at Stratford Avenue, Bridgeport, Fairfield County, CT

  13. Shallow (2-meter) temperature surveys in Colorado

    DOE Data Explorer

    Zehner, Richard E.

    2012-02-01

    Citation Information: Originator: Geothermal Development Associates, Reno, Nevada Publication Date: 2012 Title: Colorado 2m Survey Edition: First Publication Information: Publication Place: Reno Nevada Publisher: Geothermal Development Associates, Reno, Nevada Description: Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh et al. (2007) and Sladek et al. (2007), and are summarized here. The survey method was devised to measure temperature as far below the zone of solar influence as possible, have minimal equilibration time, and yet be portable enough to fit on the back of an all-terrain vehicle (ATV); Figure 2). This method utilizes a direct push technology (DPT) technique where 2.3 m long, 0.54” outer diameter hollow steel rods are pounded into the ground using a demolition hammer. Resistance temperature devices (RTD) are then inserted into the rods at 2-meter depths, and allowed to equilibrate for one hour. The temperatures are then measured and recorded, the rods pulled out of the ground, and re-used at future sites. Usually multiple rods are planted over the course of an hour, and then the sampler returns back to the first station, measures the temperatures, pulls the rods, and so on, to eliminate waiting time. At Wagon Wheel Gap, 32 rods were planted around the hot springs between June 20 and July 1, 2012. The purpose was to determine the direction of a possible upflow fault or other structure. Temperatures at 1.5m and 2m depths were measured and recorded in the attribute table of this point shapefile. Several anomalous temperatures suggest that outflow is coming from a ~N60W striking fault or shear zone that contains the quartz-fluorite-barite veins of the adjacent patented mining claims. It should be noted that temperatures at 2m

  14. Metering Research Facility Program: Installation effects on orifice meter performance. Appendices. Topical report, January 1991-December 1992

    SciTech Connect

    Morrow, T.B.; Park, J.T.

    1993-09-01

    The objective of this program was to acquire orifice discharge coefficient data in the Gas Research Institute Metering Research Facility for various metering configurations typical of field metering installations in the natural gas industry, and to evaluate the effects of using flow conditioning devices to assure proper upstream flow conditions for accuate flow rate measurements. The appendices contain the orifice coefficient data from the various installation effects tests.

  15. A metering rotary nanopump for microfluidic systems.

    PubMed

    Darby, Scott G; Moore, Matthew R; Friedlander, Troy A; Schaffer, David K; Reiserer, Ron S; Wikswo, John P; Seale, Kevin T

    2010-12-01

    We describe the design, fabrication, and testing of a microfabricated metering rotary nanopump for the purpose of driving fluid flow in microfluidic devices. The miniature peristaltic pump is composed of a set of microfluidic channels wrapped in a helix around a central camshaft in which a non-cylindrical cam rotates. The cam compresses the helical channels to induce peristaltic flow as it is rotated. The polydimethylsiloxane (PDMS) nanopump design is able to produce intermittent delivery or removal of several nanolitres of fluid per revolution as well as consistent continuous flow rates ranging from as low as 15 nL min(-1) to above 1.0 µL min(-1). At back pressures encountered in typical microfluidic devices, the pump acts as a high impedance flow source. The durability, biocompatibility, ease of integration with soft-lithographic fabrication, the use of a simple rotary motor instead of multiple synchronized pneumatic or mechanical actuators, and the absence of power consumption or fluidic conductance in the resting state all contribute to a compact pump with a low cost of fabrication and versatile implementation. This suggests that the pump design may be useful for a wide variety of biological experiments and point of care devices.

  16. Solid state watt-hour meter

    SciTech Connect

    Hurley, J.R.; Gilker, C.S.

    1984-08-21

    A watt-hour meter is disclosed which includes: a microprocessor coupled to a solid-state Hall-Effect sensor; an electrically alterable ROM coupled to the microprocessor; a power supply; a power outage timing means using the discharge characteristic of a capacitor; apparatus for supplying a 60 Hz clock signal to the microprocessor; a readout device coupled to the microprocessor to provide an indication of the power consumed; an output on the microprocessor for controlling a circuit breaker; and a switch for overriding the microprocessor controlled circuit breaker. The microprocessor and the electrically alterable ROM are connected and programmed: to sense the time of day as determined from an initial time of day and setting the 60 Hz clock signal; to sense and compute the power used by the consumer; to automatically open the circuit breaker when power demand on the electric power source is high and/or the cost per kilowatt hour is high; to automatically close the circuit breaker when the power demand on the source of electric power is low and/or the cost per kilowatt power is low; and to allow a consumer to override the microprocessor's control of the circuit breaker.

  17. 20 Meter Solar Sail Analysis and Correlation

    NASA Technical Reports Server (NTRS)

    Taleghani, B.; Lively, P.; Banik, J.; Murphy, D.; Trautt, T.

    2005-01-01

    This presentation discusses studies conducted to determine the element type and size that best represents a 20-meter solar sail under ground-test load conditions, the performance of test/Analysis correlation by using Static Shape Optimization Method for Q4 sail, and system dynamic. TRIA3 elements better represent wrinkle patterns than do QUAD3 elements Baseline, ten-inch elements are small enough to accurately represent sail shape, and baseline TRIA3 mesh requires a reasonable computation time of 8 min. 21 sec. In the test/analysis correlation by using Static shape optimization method for Q4 sail, ten parameters were chosen and varied during optimization. 300 sail models were created with random parameters. A response surfaces for each targets which were created based on the varied parameters. Parameters were optimized based on response surface. Deflection shape comparison for 0 and 22.5 degrees yielded a 4.3% and 2.1% error respectively. For the system dynamic study testing was done on the booms without the sails attached. The nominal boom properties produced a good correlation to test data the frequencies were within 10%. Boom dominated analysis frequencies and modes compared well with the test results.

  18. Infralow-frequency digital phase meter

    NASA Astrophysics Data System (ADS)

    Anepir, A. A.; Anepir, Y. A.; Gutorov, O. I.; Zainchkovskiy, V. N.; Mikhaylov, Y. G.

    1984-09-01

    Digital methods of measuring phase shifts in the infralow-frequency range are most effective, in terms of high speed and insensitivity to frequency changes in the input signal, but the output signal depends on the frequency of the input signal voltage. This drawback can be overcome by various means such as synchronization or special correction. Precise multiplication of the input signal frequency by a given factor and subsequent filling with the high-frequency of the entire time interval generated by a start-stop module will yield the optimum performance characteristics without additional calibration or correction. Such an instrument consists of two amplifier-limiter stages producing rectangular pulses with a 0.5 duty factor, a mode selector shaping pulses with either of the corresponding two durations, a high-frequency frequency signal generator, a trigger, a frequency divider, a digital period meter, a transcriber, a reversible counter, an OR circuit, two AND circuits, a counter, and three driven multivibrators. In order to cover a wide frequency range, it is necessary to use multidigit devices or, simpler, to generate a set of frequencies not higher than a certain multiple of the pulse repetition rate at the mode selectro output.

  19. Two-Phase Quality/Flow Meter

    NASA Technical Reports Server (NTRS)

    Moerk, J. Steven (Inventor); Youngquist, Robert C. (Inventor); Werlink, Rudy J. (Inventor)

    1999-01-01

    A quality and/or flow meter employs a capacitance probe assembly for measuring the dielectric constant of flow stream, particularly a two-phase flow stream including liquid and gas components.ne dielectric constant of the flow stream varies depending upon the volume ratios of its liquid and gas components, and capacitance measurements can therefore be employed to calculate the quality of the flow, which is defined as the volume ratio of liquid in the flow to the total volume ratio of gas and liquid in the flow. By using two spaced capacitance sensors, and cross-correlating the time varying capacitance values of each, the velocity of the flow stream can also be determined. A microcontroller-based processing circuit is employed to measure the capacitance of the probe sensors.The circuit employs high speed timer and counter circuits to provide a high resolution measurement of the time interval required to charge each capacitor in the probe assembly. In this manner, a high resolution, noise resistant, digital representation of each of capacitance value is obtained without the need for a high resolution A/D converter, or a high frequency oscillator circuit. One embodiment of the probe assembly employs a capacitor with two ground plates which provide symmetry to insure that accurate measurements are made thereby.

  20. A metering rotary nanopump for microfluidic systems

    PubMed Central

    Darby, Scott G.; Moore, Matthew R.; Friedlander, Troy A.; Schaffer, David K.; Reiserer, Ron S.; Wikswo, John P.

    2014-01-01

    We describe the design, fabrication, and testing of a microfabricated metering rotary nanopump for the purpose of driving fluid flow in microfluidic devices. The miniature peristaltic pump is composed of a set of microfluidic channels wrapped in a helix around a central cam shaft in which a non-cylindrical cam rotates. The cam compresses the helical channels to induce peristaltic flow as it is rotated. The polydimethylsiloxane (PDMS) nanopump design is able to produce intermittent delivery or removal of several nanoliters of fluid per revolution as well as consistent continuous flow rates ranging from as low as 15 nL/min to above 1.0 µL/min. At back pressures encountered in typical microfluidic devices, the pump acts as a high impedance flow source. The durability, biocompatibility, ease of integration with soft-lithographic fabrication, the use of a simple rotary motor instead of multiple synchronized pneumatic or mechanical actuators, and the absence of power consumption or fluidic conductance in the resting state all contribute to a compact pump with a low cost of fabrication and versatile implementation. This suggests that the pump design may be useful for a wide variety of biological experiments and point of care devices. PMID:20959938

  1. The nasal distribution of metered dose inhalers.

    PubMed

    Newman, S P; Morén, P F; Clarke, S W

    1987-02-01

    The intranasal distribution of aerosol from a metered dose inhaler has been assessed using a radiotracer technique. Inhalers were prepared by adding 99Tcm-labelled Teflon particles (simulating the drug particles) to chlorofluorocarbon propellants, and scans of the head (and chest) taken with a gamma camera. Ten healthy subjects (age range 19-29 years) each performed two radioaerosol studies with the inhaler held in two different ways: either in a single position (vial pointing upwards) or in two positions (vial pointing upwards and then tilted by 30 degrees in the sagittal plane). The vast majority of the dose (82.5 +/- 2.8 (mean +/- SEM) per cent and 80.7 +/- 3.1 per cent respectively for one-position and two-position studies) was deposited on a single localized area in the anterior one-third of the nose, the initial distribution pattern being identical for each study. No significant radioaerosol was detected in the lungs. Only 18.0 +/- 4.7 per cent and 15.4 +/- 4.1 per cent of the dose had been removed by mucociliary action after 30 minutes, and it is probable that the remainder had not penetrated initially beyond the vestibule. Since the deposition pattern was highly localized and more than half the dose probably failed to reach the turbinates it is possible that the overall effect of nasal MDIs is suboptimal for the treatment of generalized nasal disorders.

  2. Successful repair of a 6 meter battery

    SciTech Connect

    Nay, K.; Gratson, M.; Wash, S.; Sundholm, J.L.; Hippe, W.; Ramani, R.V.

    1996-12-31

    Following a two-year construction period, LTV Steel Company commissioned a new six-meter coke oven battery and ancillary facilities in December 1981 at the S. Chicago Works. The battery is a 60-oven Didier grouped flue underjet design capable of firing coke oven gas and blast furnace gas. In late 1990, coke side refractory damage in the form of severe spalls and holes in the walls were observed. Numerous repair techniques--welding, guniting, panel patching, end flue repairs using zero expansion brick--were employed as interim measures until a comprehensive repair plan could be implemented. A repair plan (primarily for coke side flues) was developed which envisioned end flue repairs on six walls per year beginning in late 1991, early 1992 depending on refractory delivery. However, in late 1992 it became apparent that the coke side deterioration was occurring faster than expected and that extensive pusher side deterioration was also occurring. Because of these developments, another battery inspection was performed. On the basis of this inspection, it was determined that a major rehabilitation would be required to assure long-term, environmentally acceptable operation of the battery.

  3. Lightning Location Using Electric Field Change Meters

    NASA Astrophysics Data System (ADS)

    Bitzer, P. M.; Christian, H.; Burchfield, J.

    2010-12-01

    Briefly introduced last year, the Huntsville Alabama Field Change Array (HAFCA) is a collection of electric field change meters deployed in and around Huntsville. Armed with accurate GPS timing, the array is able to sample electric field changes due to lightning strokes simultaneously at several locations. For the first time, different components of the lightning flash can be located in three dimensions using only electric field change records. In particular, this research will show spacetime locations throughout entire lightning strokes, from preliminary breakdown pulses to the return stroke and later processes that may be related to charge neutralization. To find the spacetime locations, standard time of arrival methods will be used: finding the parameters that best fit the model using the Marquardt method. However, we will also discuss using Markov Chain Monte Carlo methods which yield a better estimation of errors. With this information, we will discuss selected cases from the array to date. In particular, we will discuss the inter-comparison of HAFCA with two other well known lightning location arrays, NLDN and NALMA. Specifically, we will explore the relationship between the first LMA pulse in a lightning stroke and the locations of preliminary breakdown pulses and the implications on lightning initiation. Further, the return stroke locations will be shown to agree reasonably well with NLDN locations. We will also locate compact intracloud discharges (CIDs) and compare with NLDN locations.

  4. Ultrasonic flow meters for liquid measurement

    SciTech Connect

    Matson, J.

    1995-12-01

    The ultrasonic flowmeter for liquids has been in use in industry for over 30 years. In general these meters are available in two basic types - the Doppler type, and the Transit-Time (or Time-of-flight) type. There has been considerable development and advancement of this technology through the 1980`s and 1990`s due to the use of microelectronics, microprocessors and advanced software techniques. This advancement has allowed the ultrasonic flowmeter to be far more available for general use - in fact to be used as a {open_quotes}flowmeter{close_quotes}, not just as an ultrasonic flowmeter. All this because these advancements have produced lower costs, greater versatility, higher accuracy, and easier installation and maintenance. Both the Doppler type and the Transit Time type have benefited by these advances in technology. However the basic difference between the two types remains. That is that the Doppler type is primarily for {open_quotes}dirty{close_quotes} liquids: the fluid must contain reflectors or {open_quotes}scatterers{close_quotes} in the form of bubbles or solid particles. The Transit Time is for {open_quotes}clean{close_quotes} liquids: fluids that contain no second phase, although modem instruments can tolerate a much higher percentage of second phase than just 5 years ago. The Transit Time continues to provide the highest accuracy, greatest versatility and widest range of application.

  5. Thirty Meter Telescope Detailed Science Case: 2015

    NASA Astrophysics Data System (ADS)

    Skidmore, Warren; TMT International Science Development Teams; Science Advisory Committee, TMT

    2015-12-01

    The TMT Detailed Science Case describes the transformational science that the Thirty Meter Telescope will enable. Planned to begin science operations in 2024, TMT will open up opportunities for revolutionary discoveries in essentially every field of astronomy, astrophysics and cosmology, seeing much fainter objects much more clearly than existing telescopes. Per this capability, TMT's science agenda fills all of space and time, from nearby comets and asteroids, to exoplanets, to the most distant galaxies, and all the way back to the very first sources of light in the universe. More than 150 astronomers from within the TMT partnership and beyond offered input in compiling the new 2015 Detailed Science Case. The contributing astronomers represent the entire TMT partnership, including the California Institute of Technology (Caltech), the Indian Institute of Astrophysics (IIA), the National Astronomical Observatories of the Chinese Academy of Sciences (NAOC), the National Astronomical Observatory of Japan (NAOJ), the University of California, the Association of Canadian Universities for Research in Astronomy (ACURA) and US associate partner, the Association of Universities for Research in Astronomy (AURA). Cover image: artist's rendition of the TMT International Observatory on Mauna Kea opening in the late evening before beginning operations.

  6. Theoretical study of the structures and first hyperpolarizabilities of C60Cl n and Li@C60Cl n (n = 4, 6, 8, 10).

    PubMed

    Song, Yao-Dong; Wang, Liang; Wu, Li-Ming

    2016-06-01

    We recently reported (Song Y-D et al., 2016, J Mol Model 22:50) that doping with Li greatly affects the static first hyperpolarizability of C60Cl2. In this work, with a view to creating nonlinear optical materials with high thermodynamic stability and wide transparent regions, a series of Li@C60Cl n (n = 4, 6, 8, 10) were designed. The structures, electrostatic potentials, electronic structures, absorption spectra, and linear and nonlinear optical properties of C60Cl n and Li@C60Cl n were systematically investigated using density functional theory (DFT) methods. The results of our calculations indicated that the stability of these molecules decreases in the order Li@C60Cl10 > Li@C60Cl8 > Li@C60Cl6 > Li@C60Cl4. It is clear that the number of Cl atoms greatly influences the stability of Li@C60Cl n . Li@C60Cl n showed greater thermodynamic stability than Li@C60Cl2. We also investigated the first hyperpolarizabilities of Li@C60Cl n and found them to be 2973, 3640, 4307, and 2627 au for n = 4, 6, 8, and 10, respectively-higher than that of Li@C60Cl2. Finally, we noted that the transparent region could be modulated by increasing the number of Cl atoms: Li@C60Cl n possess wider transparent regions than that of Li@C60Cl2. We therefore believe that this study has highlighted an effective method for designing nonlinear optical materials with high thermodynamic stability and wide transparent regions. PMID:27188724

  7. Influence of crystal characteristics on the shock sensitivities of cyclotrimethylene trinitramine, cyclotetramethylene tetranitramine, and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetra-cyclo[5,5,0,03,1105,9]dodecane immersed in liquid

    NASA Astrophysics Data System (ADS)

    Li, Hongzhen; Xu, Rong; Kang, Bing; Li, Jinshan; Zhou, Xiaoqing; Zhang, Chaoyang; Nie, Fude

    2013-05-01

    The shock sensitivities of differently qualified cyclotrimethylene trinitramine (RDX), cyclotetramethylene tetranitramine(HMX), and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetra-cyclo[5,5,0,03,1105,9]dodecane (CL-20) immersed in liquid were determined by the large-scale gap tests, for systemic discussion on the influences of crystal characteristics on them. As a result, it shows that (1) the immersion of crystals in liquid leads to an obvious sensitivity decrease; (2) for all three explosives, their shock sensitivities are lowered with increasing their crystal apparent densities or decreasing their particle sizes, and almost not affected by particle morphologies; (3) the crystal twins are readily formed for HMX and the most distinct factor influencing its shock sensitivities; (4) it is found that the crystal apparent density affects most obviously the shock sensitivities for RDX and CL-20; and (5) CL-20, HMX, and RDX are less and less sensitive to shock, suggesting chemical components are also a determining factor.

  8. OVERCOMING THE METER BARRIER AND THE FORMATION OF SYSTEMS WITH TIGHTLY PACKED INNER PLANETS (STIPs)

    SciTech Connect

    Boley, A. C.; Morris, M. A.; Ford, E. B.

    2014-09-10

    We present a solution to the long outstanding meter barrier problem in planet formation theory. As solids spiral inward due to aerodynamic drag, they will enter disk regions that are characterized by high temperatures, densities, and pressures. High partial pressures of rock vapor can suppress solid evaporation, and promote collisions between partially molten solids, allowing rapid growth. This process should be ubiquitous in planet-forming disks, which may be evidenced by the abundant class of Systems with Tightly packed Inner Planets discovered by the NASA Kepler Mission.

  9. BILLIARDS: A Demonstration Mission for Hundred-Meter Class Near Earth Asteroid Disruption

    NASA Technical Reports Server (NTRS)

    Marcus, Matthew; Sloane, Joshua; Ortiz, Oliver; Barbee, Brent W.

    2015-01-01

    Currently, no planetary defense demonstration mission has ever been flown. While Nuclear Explosive Devices (NEDs) have significantly more energy than a kinetic impactor launched directly from Earth, they present safety and political complications, and therefore may only be used when absolutely necessary. The Baseline Instrumented Lithology Lander, Inspector, and Asteroid Redirection Demonstration System (BILLIARDS) is a demonstration mission for planetary defense, which is capable of delivering comparable energy to the lower range of NED capabilities in the form of a safer kinetic impactor. A small asteroid (<10m) is captured by a spacecraft, which greatly increases the mass available as a kinetic impactor, without the need to bring all of the mass out of Earth's gravity well. The small asteroid is then deflected onto a collision course with a larger (approx. 100m) asteroid. This collision will deflect or disrupt the larger asteroid. To reduce the cost and complexity, an asteroid pair which has a natural close approach is selected.

  10. Plans for the Meter Class Autonomous Telescope and Potential Coordinated Measurements with Kwajalein Radars

    NASA Technical Reports Server (NTRS)

    Stansberry, Gene; Kervin, Paul; Mulrooney, Mark

    2010-01-01

    The National Aeronautics and Space Administration's (NASA) Orbital Debris Program Office is teaming with the US Air Force Research Laboratory's (AFRL) Maui Optical Site to deploy a moderate field-of-view, 1.3 m aperture, optical telescope for orbital debris applications. The telescope will be located on the island of Legan in the Kwajalein Atoll and is scheduled for completion in the Spring of 2011. The telescope is intended to sample both low inclination/high eccentricity orbits and near geosynchronous orbits. The telescope will have a 1 deg diagonal field-of-view on a 4K x 4K CCD. The telescope is expected to be able to detect 10-cm diameter debris at geosynchronous altitudes (5 sec exposure assuming a spherical specular phase function w/ albedo =0.13). Once operational, the telescope has the potential of conducting simultaneous observations with radars operated by the US Army at Kwajalein Atoll (USAKA) and located on the island of Roi-Namur, approximately 55 km to the north of Legan. Four radars, representing 6 frequency bands, are available for use: ALTAIR (ARPA-Long Range Tracking and Instrumentation Radar) operating at VHF & UHF, TRADEX (Target Resolution and Discrimination Experiment) operating at L-band and S-band, ALCOR (ARPA-Lincoln C-band Observables Radar) operating at S-band, and MMW (Millimeter Wave) Radar operating at Ka-band. Also potentially available is the X-band GBRP (Ground Based Radar-Prototype located 25 km to the southeast of Legan on the main island of Kwajalein.

  11. A Plan for a New Generation 2-METER Class Telescope in Indonesia

    NASA Astrophysics Data System (ADS)

    van der Hucht, Karel A.

    1984-02-01

    One of the prime astrophysical interests of the Observatorium Bosscha is, and has always been, double star research: visual double star research with the double-60 cm Zeiss telescope (dedicated in 1928), and theoretical research of evolved massive spectroscopic binaries (since 1972). For one thing, this is the very reason that this IAU Colloquium No. 80, celebrating the 60th anniversary of the Observatorium Bosscha in Lembang, is devoted to binary astrophysics. Up to now, visual, photographic, and photometric tools have been used for binary research at the Observatorium Bosscha. An important, essential additional tool for binary research is spectrographic equipment, in order to measure radial velocities of binary components. Therefore, we suggest to make a plan for a new modern telescope, a reflector with a primary mirror of about 2 m in diameter and with a modern spectrograph/detector combination for radial velocity measurements. At a number of major astronomical observatories scientists have been considerating to erect new telescopes devoted primarily to radial velocity measurements. The reason for this is that at the end of this decade the parallax and proper motion measurements to be made by the ESA astrometric satellite Hipparcos will become available of more than 100 000 single stars and double stars. At that time there will be a compelling need for radial velocity measurements of all these stars to complement the parallax and proper motion measurements. With the combination of this data enormous progress will be made in double star research, and in the study of galactic dynamics, another topic of interest of the Observatorium Bosscha. If it could be realized to build such a dedicated radial velocity telescope in Indonesia, Indonesian astronomers could take a leading role in this field of research. Without going into technical details, we would like to emphasize here that such a new instrument should be a trueNew Generation Telescope, and that the Institut Teknologi Bandung should participate from the very beginning in its design, construction and assembling, and the subsequent servicing; ITB could participate in the field of optics, mechanics, and electronics. Modern astronomy offers tremendous challenges to technology, which are of great interest to technological institutes. The new telescope should be computer controlled, and the spectrograph should have a modern digital read-out (Reticon, IPCS, or CCD). The telescope should have one of those recently becoming availablethin mirrors, allowing more mechanical freedom. It could be a telescope with a siderostat which feeds the light into a fixed telescope, thus improving both the stability of the telescope and that of the spectrograph. In this way the staff and students of ITB, as well as the technical staff of the Observatorium Bosscha will be drawn into modern techniques of many varieties. And for ITB such an enterprise may even have a spin-off into other fields than astronomy. One aspect which is of great importance for the new telescope is the selection of its site. The present site of the Observatorium Bosscha in Lembang is a good one, but for a new modern telescope one wants to make sure that it is going to be located at the most ideal site. Therefore an Indonesian site-survey should be initiated promptly. Site survey equipment is available at many big observatories and could be borrowed. The site survey should extend over at least 4 5 years to monitor the meteorological and environmental situation at many sites. In the meantime the design and fund rainsing can be considered. Modern day astronomy depends on financial support from governments and inter-governmental organizations. Therefore it is urged that a proposal for a new telescope as indicated above clearly describes the advantages of such a new telescope both for astrophysical research in Indonesia, and for the introduction of new technologies in Indonesian technological institutes. The recently formed Steering Committee for Indonesian-Netherlands Astrophysics (INA) is willing to explore the possibilities for this plan. We hope that after investigating the interest of ITB in this matter, a proposal could be made before the end of this year.

  12. The Early Development of Electronic pH Meters

    ERIC Educational Resources Information Center

    Hines, Wallis G.; de Levie, Robert

    2010-01-01

    A 19-year-old undergraduate at the University of Chicago, Kenneth Goode, in 1921 came up with the idea of an electronic pH meter, worked out some of its initial problems, and set in motion an international scientific effort that culminated in the current, wide availability of electronic pH meters. Except for the replacement of vacuum tubes by…

  13. 28. LEUPOLD AND STEVENS MIDGET CURRENT METER, WITH FOLDING SCALE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. LEUPOLD AND STEVENS MIDGET CURRENT METER, WITH FOLDING SCALE AT TOP, AND THREE VARIATIONS OF WES MINIATURE PRICE-TYPE CURRENT METERS BELOW. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

  14. 40 CFR 92.122 - Smoke meter calibration.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Smoke meter calibration. 92.122 Section...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.122 Smoke meter... zero control shall be adjusted under conditions of “no smoke” to give a recorder or data...

  15. Elevated pressure performance of diaphragm meters - an MRF program

    SciTech Connect

    Behring, K.A. II

    1995-12-31

    Diaphragm meter data were acquired in the Gas Research Institute (GRI) Metering Research Facility (MRF) at elevated pressures to evaluate volume flow rate bias errors (if present), relative to ANSI B109.1 (1) and ANSI B109.2 (2) specifications, that may be induced as a result of the pressure conditions. Simultaneous pressure drop data were acquired in order to verify the ANSI General Service Capacity Equation predictions, which are used to scale meter flow capacity from one operating condition to another. Results showed that diaphragm meters will repeat well within the ANSI accuracy specification of {plus_minus}1.0%, but do show pressure dependent biases. Above 20-50% full scale, some small diaphragm meters tested on natural gas showed biases with dynamic pressure, amounting to 0.5% error at full scale, over the range of allowable pressures. large diaphragm meters tested on nitrogen did not show pressure dependent biases greater than the {plus_minus}1.0% specification. Below 20-50% full scale, some diaphragm meters showed an apparently random pressure effect. The ANSI General Service Capacity Equation does not accurately predict meter performance, and will produce pressure dependent errors up to over +60% in predicted capacity. An alternative model, which accurately matches MRF data, is presented.

  16. Feasibility of Mossbauer survey meter for hydrocarbon and mineral reserves

    NASA Technical Reports Server (NTRS)

    Singh, J. J.

    1975-01-01

    The feasibility of developing a Mossbauer survey meter for geophysical prospecting was investigated. Various critical requirements that will have to be met by the source and absorber crystals in such an instrument were identified. It was concluded that a survey meter based on (Rh-103 resonance (40 kev) yields Rh-103) isomeric transition is feasible and should be developed.

  17. Microwave moisture meter for in-shell peanut kernels

    Technology Transfer Automated Retrieval System (TEKTRAN)

    . A microwave moisture meter built with off-the-shelf components was developed, calibrated and tested in the laboratory and in the field for nondestructive and instantaneous in-shell peanut kernel moisture content determination from dielectric measurements on unshelled peanut pod samples. The meter ...

  18. 40 CFR 1065.225 - Intake-air flow meter.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... flow meter. (a) Application. You may use an intake-air flow meter in combination with a chemical... background correction as described in § 1065.667. (2) In the following cases, you may use an intake-air flow...-specific fuel consumption and fuel consumed. (b) Component requirements. We recommend that you use...

  19. 40 CFR 1065.225 - Intake-air flow meter.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... flow meter. (a) Application. You may use an intake-air flow meter in combination with a chemical... background correction as described in § 1065.667. (2) In the following cases, you may use an intake-air flow...-specific fuel consumption and fuel consumed. (b) Component requirements. We recommend that you use...

  20. 40 CFR 1065.220 - Fuel flow meter.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Fuel flow meter. 1065.220 Section 1065... ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.220 Fuel flow meter. (a) Application. You may use fuel flow in combination with a chemical balance of fuel, inlet air,...

  1. 40 CFR 1065.220 - Fuel flow meter.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Fuel flow meter. 1065.220 Section 1065... ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.220 Fuel flow meter. (a) Application. You may use fuel flow in combination with a chemical balance of fuel, inlet air,...

  2. 40 CFR 1065.220 - Fuel flow meter.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Fuel flow meter. 1065.220 Section 1065... ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.220 Fuel flow meter. (a) Application. You may use fuel flow in combination with a chemical balance of fuel, inlet air,...

  3. 69. (Credit JTL) View beneath marble meter bench showing hydraulic ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    69. (Credit JTL) View beneath marble meter bench showing hydraulic lines leading to water valve hydraulic control cylinders from control handles in bench; strings and pulleys activate meters. - McNeil Street Pumping Station, McNeil Street & Cross Bayou, Shreveport, Caddo Parish, LA

  4. Thermally stable compositions including 2,4,8,10-tetranitro-5H-pyrido[3',2':4,5][1,2,3]triazolo[1,2-a]benzotriazo- l-6-ium, inner salt

    DOEpatents

    Hiskey, Michael A.; Huynh, My Hang

    2010-01-26

    An explosive formulation including 2,4,8,10-tetranitro-5H-pyrido[3',2':4,5][1,2,3]triazolo[1,2-a]benzotriazo- l-6-ium, inner salt and a high temperature binder is disclosed together with a process of preparing 2,4,8,10-tetranitro-5H-pyrido[3',2':4,5][1,2,3]triazolo[1,2-a]benzotriazo- l-6-ium, inner salt.

  5. A new look at measurement uncertainty of multiphase flow meters

    SciTech Connect

    Kouba, G.E.

    1998-12-31

    At present no standard of presenting multiphase flow meter (MPFM) uncertainties has been accepted by industry. Consequently, vendors specifications may only indicate velocity and component fraction uncertainties, while customers will typically need to know the overall uncertainty of the hydrocarbon (gas or oil) flow rate. Moreover, comparisons between different meters, meter locations, and metering strategies are difficult without the combined uncertainties of the hydrocarbon measurement. A simple uncertainty analysis (UA) is presented as a means of combining individual measurement uncertainties to determine an overall uncertainty for a single component, e.g., oil rate. The results are displayed as contour lines of constant oil rate uncertainty on plots of gas fraction versus water cut. Examples illustrate how the uncertainty of oil rate measurement might be reduced by operating the meter at higher pressure, or employing partial separation strategies, and limitations of such strategies.

  6. Digital Phase Meter for a Laser Heterodyne Interferometer

    NASA Technical Reports Server (NTRS)

    Loya, Frank

    2008-01-01

    The Digital Phase Meter is based on a modified phase-locked loop. When phase alignment between the reference input and the phase-shifted metrological input is achieved, the loop locks and the phase shift of the digital phase shifter equals the phase difference that one seeks to measure. This digital phase meter is being developed for incorporation into a laser heterodyne interferometer in a metrological apparatus, but could also be adapted to other uses. Relative to prior phase meters of similar capability, including digital ones, this digital phase meter is smaller, less complex, and less expensive. The phase meter has been constructed and tested in the form of a field-programmable gate array (FPGA).

  7. An evaluation of the Kearny Fallout Meter (KFM), a radiation detector constructed from commonly available household materials.

    PubMed

    McDonald, J T; West, W G; Kearfott, K J

    2004-11-01

    A radiation detector constructed of common household materials was developed at Oak Ridge National Laboratory (ORNL) by Cresson H. Kearny and has been referred to as the Kearny Fallout Meter (KFM). Developed during the height of the Cold War, the KFM was intended to place a radiation meter capable of measuring fallout from nuclear weapons in the hands of every U.S. citizen. Instructions for the construction of the meter, as well as information about radiation health effects, were developed in the form of multi-page newspaper insert. Subsequently, the sensitivity of the meter was refined by a high school teacher, Dr. Paul S. Lombardi, for use in demonstrations about radiation. The meter is currently being marketed for survivalists in light of potential radiation terrorist concerns. The KFM and Lombardi's variation of it are constructed and evaluated for this work. Calibrated tests of the response and variations in response are reported. A critique of the multi-page manual is made. In addition, the suitability of using such a detector, in terms of actual ease of construction and practical sensitivity, is discussed for its use in demonstrations and introductory classes on nuclear topics.

  8. 46 CFR 170.255 - Class 1 doors; permissible locations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... passenger, crew, and working spaces are permitted only above a deck, the molded line of which, at its lowest point at side, is at least 7 feet (2.14 meters) above the deepest load line. (b) Class 1 doors are permitted within passenger, crew, and working spaces, wherever located, if— (1) In the judgment of the...

  9. 46 CFR 170.255 - Class 1 doors; permissible locations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... passenger, crew, and working spaces are permitted only above a deck, the molded line of which, at its lowest point at side, is at least 7 feet (2.14 meters) above the deepest load line. (b) Class 1 doors are permitted within passenger, crew, and working spaces, wherever located, if— (1) In the judgment of the...

  10. 46 CFR 170.255 - Class 1 doors; permissible locations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... passenger, crew, and working spaces are permitted only above a deck, the molded line of which, at its lowest point at side, is at least 7 feet (2.14 meters) above the deepest load line. (b) Class 1 doors are permitted within passenger, crew, and working spaces, wherever located, if— (1) In the judgment of the...

  11. 46 CFR 170.255 - Class 1 doors; permissible locations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... passenger, crew, and working spaces are permitted only above a deck, the molded line of which, at its lowest point at side, is at least 7 feet (2.14 meters) above the deepest load line. (b) Class 1 doors are permitted within passenger, crew, and working spaces, wherever located, if— (1) In the judgment of the...

  12. The utility of blood glucose meters in biotechnological applications.

    PubMed

    FitzGerald, Jennifer; Vermerris, Wilfred

    2005-06-01

    Most methods used to measure glucose concentrations in biotechnological settings are labour-intensive and/or expensive. With this in mind we have investigated the possibility of employing blood glucose meters, the use of which has the benefit of being fast, convenient and inexpensive, for this purpose. Accu-Chek Advantage (Roche Diagnostics, Indianapolis, IN, U.S.A.) and Precision QID (Medisense, Abbott Laboratories, Indianapolis, IN, U.S.A.) meters were tested using glucose samples of known concentration, at pH 7.5 and 4.8. The Accu-Chek Advantage meter uses strips containing the enzyme glucose dehydrogenase. This meter showed a linear response for glucose concentrations between 0.50 and 6.0 g/litre, and the effect of pH was small. The Precision QID meter uses strips containing the enzyme glucose oxidase and is more sensitive to pH. The displayed glucose concentrations at low pH values were consistently lower than at higher pH values. At both pH values the response curve reached a plateau, which limited the effective range of this meter to a range of 0.30-2.5 g/litre. Unlike the Precision QID meter, the Accu-Chek Advantage meter also responded to xylose and arabinose. A synergistic effect of combining sugars was observed when a mixture of sugars consisting of glucose and arabinose, or glucose and xylose, was applied: the displayed concentrations were consistently higher than was expected on the basis of the individual calibration curves. The use of glucose meters is a fast and convenient alternative to existing methods and may be of particular use for screening purposes where a high degree of accuracy is not crucial. The choice of meter should depend on the application, and in this respect the pH, expected concentration range and the presence of other sugars are among the factors that should be considered.

  13. Orifice meter installation effects in the GRI MRF

    SciTech Connect

    Morrow, T.B.

    1995-12-31

    Experimental results from the Gas Research Institute (GRI) Metering Research Facility (MRF) are presented on the performance of flow conditioners used to minimize velocity profile distortion and swirl that can cause flow rate measurement errors in orifice meter installations. Orifice meter installations effects tests were performed with several different straightening vane and perforated plate flow conditioner designs in the MRF Interim Low Pressure Loop (ILPL). All tests were performed flowing nitrogen gas at a pressure of 0.72 MPa (105 psia) and a Reynolds number of 9x10{sup 5} through D =102 mm (4 in.) diameter meter tubes. Flow conditioner performance was evaluated for two orifice meter installation configurations. The first was a meter tube with a long upstream length of 45 D installed downstream of a tee used as an elbow. The second was a meter tube with a short upstream length of 17 D installed downstream of two out-of-plane 90{degrees} elbows. Values of orifice discharge coefficient, C{sub d}, were measured as a function of flow conditioner location in the meter tube. Values of orifice coefficient shift, {Delta}C{sub d}, were calculated as the percentage deviation from a baseline (reference) C{sub d} value measured for the long, 45 D upstream length meter tube installed downstream of an oversized Sprenkle flow conditioner. In addition, vertical and horizontal profiles of mean axial velocity and swirl were measured through the upstream orifice flange tap with and without flow conditioners in the short, 17D meter tube downstream of two out-of-plane 90{degrees} elbows.

  14. Ultrasonic velocity meter used in stream gaging

    USGS Publications Warehouse

    Fayard, L.D.; ,

    1991-01-01

    Many streams and canals in Florida are affected by tides or control structures and experience very low flow velocities at times. For example, the St. Johns River in northeastern Florida is affected by tides for about 140 miles upstream from its mouth and many canals in the Miami area of southeastern Florida are controlled by manmade structures and other elements that cause a variable backwater effect and very low flow velocities. For these conditions, it becomes necessary to obtain a continuous index of mean velocity as well as stage in order to compute discharge. Point-velocity sensing systems have been used to relate point velocity to mean velocity but their usefulness commonly is limited because of the lack of an exact relation. The ultrasonic velocity meter (UVM) provides an alternative approach to measuring a velocity index that can be related to mean velocity; one that provides an integrated velocity at a prescribed elevation across a stream. Six stations in the tidal-affected lower St. Johns River basin are presently equipped with UVM's. Measuring sections are as narrow as 100 feet and as wide as 900 feet. Multiple acoustic paths are used to measure wide sections in a straight reach of river; crossing paths are used to measure sections in a bend of the river. Because of low velocity and variable backwater conditions, flow also is measured with UVM's in 11 canals in the Miami area that drain into The Everglades. At some of the canal sites transducers have been permanently mounted and a 'portable' UVM module is used to obtain instantaneous velocity readings.

  15. Justification of the Utility of Introducing Smart Meters in Latvia

    NASA Astrophysics Data System (ADS)

    Kunickis, M.; Dandens, A.; Bariss, U.

    2015-12-01

    Automatic data reading from smart meters is being developed in many parts of the world, including Latvia. The key drivers for that are developments of smart technologies and economic benefits for consumers. Deployment of smart meters could be launched in a massive scale. Several pilot projects were implemented to verify the feasibility of smart meters for individual consumer groups. Preliminary calculations indicate that installation of smart meters for approximately 23 % of electricity consumers would be economically viable. Currently, the data for the last two years is available for an in-depth mathematical analysis. The continuous analysis of consumption data would be established, when more measurements from smart meters are available. The extent of introduction of smart meters should be specified during this process in order to gain the maximum benefit for the whole society (consumers, grid companies, state authorities), because there are still many uncertain and variable factors. For example, it is necessary to consider statistical load variations by hour, dependence of electricity consumption on temperature fluctuations, consumer behaviour and demand response to market signals to reduce electricity consumption in the short and long term, consumer's ambitions and capability to install home automation for regulation of electricity consumption. To develop the demand response, it is necessary to analyse the whole array of additional factors, such as expected cost reduction of smart meters, possible extension of their functionality, further development of information exchange systems, as well as standard requirements and different political and regulatory decisions regarding the reduction of electricity consumption and energy efficiency.

  16. Note: Ultrasonic liquid flow meter for small pipes.

    PubMed

    Yu, Yang; Zong, Guanghua

    2012-02-01

    An ultrasonic flow meter for small pipes is presented. For metal pipe diameter smaller than 10 mm, clamp-on ultrasonic contrapropagation flow meters may encounter difficulties if cross talk or the short acoustic path contributes to large uncertainty in transit time measurement. Axial inline flow meters can avoid these problems, but they may introduce other problems if the transducer port is not properly positioned. Three types of pipe connecting tees are compared using the computational fluid dynamics (CFD) method. CFD shows the 45° tee has more uniform velocity distribution over the measuring section. A prototype flow meter using the 45° tee was designed and tested. The zero flow experiment shows the flow meter has a maximum of 0.002 m∕s shift over 24 h. The flow meter is calibrated by only 1 meter factor. After calibration, inaccuracy lower than 0.1% of reading was achieved in the laboratory, for a measuring range from 15 to 150 g∕s (0.29 to 2.99 m∕s; Re = 2688 to 26,876). PMID:22380141

  17. Note: Ultrasonic liquid flow meter for small pipes

    NASA Astrophysics Data System (ADS)

    Yu, Yang; Zong, Guanghua

    2012-02-01

    An ultrasonic flow meter for small pipes is presented. For metal pipe diameter smaller than 10 mm, clamp-on ultrasonic contrapropagation flow meters may encounter difficulties if cross talk or the short acoustic path contributes to large uncertainty in transit time measurement. Axial inline flow meters can avoid these problems, but they may introduce other problems if the transducer port is not properly positioned. Three types of pipe connecting tees are compared using the computational fluid dynamics (CFD) method. CFD shows the 45° tee has more uniform velocity distribution over the measuring section. A prototype flow meter using the 45° tee was designed and tested. The zero flow experiment shows the flow meter has a maximum of 0.002 m/s shift over 24 h. The flow meter is calibrated by only 1 meter factor. After calibration, inaccuracy lower than 0.1% of reading was achieved in the laboratory, for a measuring range from 15 to 150 g/s (0.29 to 2.99 m/s; Re = 2688 to 26 876).

  18. Metering Wheel-Wire Track Wire Boom Deployment Mechanism

    NASA Technical Reports Server (NTRS)

    Granoff, Mark S.

    2014-01-01

    The NASA MMS Spin Plane Double Probe (SDP) Deployer utilizes a helical path, rotating Metering Wheel and a spring loaded Wire "Holding" Track to pay out a "fixed end" 57 meter x 1.5 mm diameter Wire Boom stored between concentric storage cylinders. Unlike rotating spool type storage devices, the storage cylinders remain stationary, and the boom wire is uncoiled along the length of the cylinder via the rotation of the Metering Wheel. This uncoiling action avoids the need for slip-ring contacts since the ends of the wire can remain stationary. Conventional fixed electrical connectors (Micro-D type) are used to terminate to operational electronics.

  19. Federal metering data analysis needs and existing tools

    SciTech Connect

    Henderson, Jordan W.; Fowler, Kimberly M.

    2015-07-01

    Agencies have been working to improve their metering data collection, management, and analysis efforts over the last decade (since EPAct 2005) and will continue to address these challenges as new requirements and data needs come into place. Unfortunately there is no “one-size-fits-all” solution. As agencies continue to expand their capabilities to use metered consumption data to reducing resource use and improve operations, the hope is that shared knowledge will empower others to follow suit. This paper discusses the Federal metering data analysis needs and some existing tools.

  20. Trunk Highway 169: Dynamic ramp metering evaluation. Final report

    SciTech Connect

    1998-03-01

    Peak period travel demand has exceed unmanaged road capacity on most of Twin Cities metropolitan area freeways for more than two decades. During this time, the Minnesota Department of Transportation (MN/DOT) has developed and implemented its freeway traffic management system (FTMS). MN/DOT continues to expand the FTMS, which includes ramp metering as one component. This report documents the impact of dynamic ramp metering on Trunk Highway 169 (TH 16) from Minnetonka Boulevard in Minnetonka to 77th Avenue in Brooklyn Park. The study examines changes in traffic performance with regard to traffic flow, congestion levels, travel times, and accident rates before and after implementation of dynamic ramp metering.

  1. Hybrid TLC-pair meter for the Sphinx Project

    NASA Technical Reports Server (NTRS)

    Wada, T.; Yamamoto, I.; Takahashi, N.; Misaki, A.

    1985-01-01

    The chief aims in THE SPHINX PROJECT are research of super lepton physics and new detector experiments. At the second phase of THE SPHINX PROJECT, a hybrid TLC-PAIR METER was designed for measuring high energy neutrino sources (E upsilon * TeV), searching high energy muon sources (E mu TeV) and measuring muon group (E mu 1 TeV). The principle of PAIR METER has been already proposed. In this TLC-PAIR METER, electromagnetic shower induced by cosmic ray muons are detected using TL (Thermoluminescence) sheets with position counters.

  2. A sensitive and high dynamic range cw laser power meter

    NASA Astrophysics Data System (ADS)

    Krishnan, S.; Bindra, K. S.; Oak, S. M.

    2008-12-01

    We report the design of a cost effective, highly sensitive cw laser power meter with a large dynamic range based on a photodiode. The power meter consists of a photodiode, a current to voltage converter circuit, an offset balancing circuit, a microcontroller, an analog to digital converter, reed relays, and an alphanumeric liquid crystal display. The power meter can record absolute laser power levels as low as 1 pW. The dynamic range measured with a cw laser at a wavelength of 532 nm is 8×1010. The high sensitivity and large dynamic range are achieved by the implementation of an analog background balancing circuit and autoranging.

  3. Design Study of an 8 Meter Monolithic Mirror UV/Optical Space Telescope

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2008-01-01

    This paper will review a recent NASA MSFC preliminary study that demonstrated the feasibility of launching a 6 to 8 meter class monolithic primary mirror telescope to Sun-Earth L2 using an Ares V. The study started with the unique capabilities of the Ares V vehicle and examined the feasibility of launching a large aperture low cost low risk telescope based on a conventional ground based glass primary mirror. Specific technical areas studied included optical design; structural design/analysis including primary mirror support structure, sun shade and secondary mirror support structure; thermal analysis; launch vehicle performance and trajectory; spacecraft including structure, propulsion, GN & C, avionics, power systems and reaction wheels; operations & servicing, mass budget and system cost. The study telescope was an on-axis three-mirror anastigmatic design with a fine steering mirror. The observatory has a 100 arc-minute (8.4 X 12 arc-minutes) of diffraction limited field of view at a wavelength les than 500 nm. The study assumed that the primary mirror would be fabricated from an existing Schott Zerodur residual VLT blank edged to 6.2 meters, 175 mm thick at the edge with a mass of 11,000 kg. The entire mass budget for the observatory including primary mirror, structure, light baffle tube, instruments, space craft, avionics, etc. is less than 40,000 kg - a 33% mass margin on the Ares V's 60,000 kg Sun-Earth L2 capability. An 8 meter class observatory would have a total mass of less than 60,000 kg of which the primary mirror is the largest contributor.

  4. Does Class Size Matter?

    ERIC Educational Resources Information Center

    Ehrenberg, Ronald G.; Brewer, Dominic J.; Gamoran, Adam; Willms, J. Douglas

    2001-01-01

    Reports on the significance of class size to student learning. Includes an overview of class size in various countries, the importance of teacher adaptability, and the Asian paradox of large classes allied to high test scores. (MM)

  5. Effects of diffraction and static wavefront errors on high-contrast imaging from the Thirty Meter Telescope

    NASA Technical Reports Server (NTRS)

    Troya, Mitchell; Chananb, Gary; Crossfielda, Ian; Dumonta, Philip; Green, Joseph J.; Macintosh, Bruce

    2006-01-01

    High-contrast imaging, particularly direct detection of extrasolar planets, is a major science driver for the next generation of extremely large telescopes such as the segmented Thirty Meter Telescope. This goal requires more than merely diffraction-limited imaging, but also attention to residual scattered light from wavefront errors and diffraction effects at the contrast level of 10-8-10-9. Using a wave-optics simulation of adaptive optics and a diffraction suppression system we investigate diffraction from the segmentation geometry, intersegment gaps, obscuration by the secondary mirror and its supports. We find that the large obscurations pose a greater challenge than the much smaller segment gaps. In addition the impact of wavefront errors from the primary mirror, including segment alignment and figure errors, are analyzed. Segment-to-segment reflectivity variations and residual segment figure error will be the dominant error contributors from the primary mirror. Strategies to mitigate these errors are discussed.

  6. Radiofrequency fields associated with the Itron smart meter.

    PubMed

    Tell, R A; Sias, G G; Vazquez, A; Sahl, J; Turman, J P; Kavet, R I; Mezei, G

    2012-08-01

    This study examined radiofrequency (RF) emissions from smart electric power meters deployed in two service territories in California for the purpose of evaluating potential human exposure. These meters included transmitters operating in a local area mesh network (RF LAN, ∼250 mW); a cell relay, which uses a wireless wide area network (WWAN, ∼1 W); and a transmitter serving a home area network (HAN, ∼70 mW). In all instances, RF fields were found to comply by a wide margin with the RF exposure limits established by the US Federal Communications Commission. The study included specialised measurement techniques and reported the spatial distribution of the fields near the meters and their duty cycles (typically <1 %) whose value is crucial to assessing time-averaged exposure levels. This study is the first to characterise smart meters as deployed. However, the results are restricted to a single manufacturer's emitters. PMID:22234423

  7. Workshop on Fundamental Research Issues in Orifice Metering

    NASA Astrophysics Data System (ADS)

    Mattingly, G. E.; Spencer, E. A.; Klein, M.

    1984-09-01

    An international workshop on orifice metering research is reported. This workshop, sponsored jointly by the Gas Research Institute, the National Engineering Laboratory in the United Kingdom, and the National Bureau of Standards (NBS) with assistance from the National Science Foundation, convened 100 attendees from 10 countries at NBS-Gaithersburg, MD on June 9 to 10, 1983. Attendees represented a broad range of interests and fluid measurements capabilities from theoretical and computational-numerical modelers and experimental fluid dynamicists to meter manufacturers and orifice users. Attendees listed problem areas in orifice metering practice, discussed research projects to respond to these, and prioritized these efforts according to their perceived potential to improve orifice metering. An extensive bibliography is included.

  8. Unsteady Cavitation Simulation in Transient Process of Turbine Flow Meter

    NASA Astrophysics Data System (ADS)

    Chen, Gang; Liu, Shuhong; Cao, Guangjun

    In a turbine flow meter, cavitation will take place when local pressure falls below the vapor pressure of liquid products and it usually speeds up the rotor at the given high flow rate. In order to study its effects on meter factor, numerical simulation on transient unsteady turbulent flow is carried out based on the mixture homogeneous two phase cavitation model which is deduced from the theory of evaporation and condensation on a plane. The momentum source terms from the variation rotating speed of transient processes and the cavitation mass transport source terms are introduced into the transient unsteady governing equations. The results show that the meter factor grows with the increase of the cavitation number and meter factor will be affected by cavitation.

  9. Solutions For Smart Metering Under Harsh Environmental Condicions

    NASA Astrophysics Data System (ADS)

    Kunicina, N.; Zabasta, A.; Kondratjevs, K.; Asmanis, G.

    2015-02-01

    The described case study concerns application of wireless sensor networks to the smart control of power supply substations. The solution proposed for metering is based on the modular principle and has been tested in the intersystem communication paradigm using selectable interface modules (IEEE 802.3, ISM radio interface, GSM/GPRS). The solution modularity gives 7 % savings of maintenance costs. The developed solution can be applied to the control of different critical infrastructure networks using adapted modules. The proposed smart metering is suitable for outdoor installation, indoor industrial installations, operation under electromagnetic pollution, temperature and humidity impact. The results of tests have shown a good electromagnetic compatibility of the prototype meter with other electronic devices. The metering procedure is exemplified by operation of a testing company's workers under harsh environmental conditions.

  10. A model survey meter using undoped poly (ether sulfone)

    NASA Astrophysics Data System (ADS)

    Nakamura, Hidehito; Shirakawa, Yoshiyuki; Kanayama, Masaya; Sato, Nobuhiro; Kitamura, Hisashi; Takahashi, Sentaro

    2015-04-01

    The large region surrounding the damaged Fukushima Daiichi Nuclear Power Plant has necessitated the use of numerous radiation survey meters with large, robust substrates. The survey meters require efficient scintillation materials that do not require doping and have dimensional stability, such as poly (ether sulfone) (PES) resins. Here, we demonstrate the performance of a model survey meter that uses large PES plates with polished, mirrored surfaces and rough, scattering surfaces. Light collection efficiencies from plates having one or more of these surfaces were quantitatively Characterised with 36Cl-, 60Co-, 137Cs-radioactive sources. The count rates of plates having a combination of mirrored/scattering-surfaces are >1.6 times that for plates having two mirrored surfaces. In addition, a significant amount of radiation-induced light generated in the PES is trapped inside the plate because of its relatively high refractive index. The results indicate that large, undoped PES plates can be used in radiation survey meters.

  11. 5. FLOW METER AND PIPING SHOWING CONNECTIONS. Hot Springs ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. FLOW METER AND PIPING SHOWING CONNECTIONS. - Hot Springs National Park Bathhouse Row, Maurice Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR

  12. Suppression of radiated emission in fiscal taxi meter

    NASA Astrophysics Data System (ADS)

    He, Hong; Yang, Pei-pei; Su, Xing; Zhang, Da-jian; Wang, Ke-xi; Hou, Ming-feng

    2011-12-01

    This paper is based upon National Standards for EMC. For the problem that the intensity of electromagnetic radiation in the meter with the THG at 36MHz is seriously more than National Standards, by studying the theory of radiation emission and analyzing the formation mechanism of electromagnetic radiation interference, it proposes three restrain measures: 1.the improvement of the Crystal oscillator's grounding measure; 2.adding a RC filter circuit to the Crystal oscillator circuit; 3.the improvement of the tax's communication cable, solving the problem that radiation harassment the taxi meter seriously exceeds. The experimental result demonstrates that the radiation intensity of tax meter improved with the general measures meet the requirements of the national standard, making more than 32000 taxes in Tianjin install this green meter, protecting the safety of staff and normal operation of the surrounding equipment.

  13. DETAIL OF THERMALWATER FLOW METER. Hot Springs National Park, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF THERMAL-WATER FLOW METER. - Hot Springs National Park, Bathhouse Row, Superior Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR

  14. THERMALWATER FLOW METER. Hot Springs National Park, Bathhouse Row, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    THERMAL-WATER FLOW METER. - Hot Springs National Park, Bathhouse Row, Superior Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR

  15. 27. LEUPOLD AND STEVENS MIDGET CURRENT METER (WITH ALTERNATE IMPELLER) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    27. LEUPOLD AND STEVENS MIDGET CURRENT METER (WITH ALTERNATE IMPELLER) AND FOLDING SCALE (MEASURED IN INCHES). - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

  16. 13. INTERIOR VIEW, DETAIL OF METERED WARNING BELL (PRIOR TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR VIEW, DETAIL OF METERED WARNING BELL (PRIOR TO ARRIVAL OF TRAINS), LOCATED IN TICKET OFFICE, SOUTHWEST WALL - Baltimore & Ohio Railroad Station, Laurel, 101 Lafayette Avenue, Laurel, Prince George's County, MD

  17. 99. DETAIL OF TYPICAL METER ADJUST PANELS LOCATED IN LAST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    99. DETAIL OF TYPICAL METER ADJUST PANELS LOCATED IN LAST TWO CABINETS ON RIGHT IN CA-133-1-A-97 - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

  18. Test results of the DOE/Sandia 17 meter VAWT

    NASA Technical Reports Server (NTRS)

    Nellums, R. O.; Worstell, M. H.

    1979-01-01

    A review is given of the test program of a 17 meter Vertical Axis Wind Turbine VAWT. Performance test results are discussed including difficulties encountered during the VAWT operation along with ways of solving these problems.

  19. 40 CFR 1065.640 - Flow meter calibration calculations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... 1065.640 Section 1065.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.640 Flow meter... Flow Meters C fCFV b g exh =1.385 g dexh = g air = 1.399 0.000 0.6822 0.6846 0.400 0.6857 0.6881...

  20. 40 CFR 1065.640 - Flow meter calibration calculations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... 1065.640 Section 1065.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.640 Flow meter...: Table 2 of § 1065.640—C fCFV versus β and γ for CFV Flow Meters C fCFV β γ exh =1.385 γ dexh = γ air =...

  1. 40 CFR 1065.640 - Flow meter calibration calculations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... 1065.640 Section 1065.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.640 Flow meter...: Table 2 of § 1065.640—C fCFV versus β and γ for CFV Flow Meters C fCFV β γ exh =1.385 γ dexh = γ air =...

  2. 40 CFR 1065.640 - Flow meter calibration calculations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... 1065.640 Section 1065.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.640 Flow meter... Flow Meters C fCFV β γ exh =1.385 γ dexh = γ air = 1.399 0.000 0.6822 0.6846 0.400 0.6857 0.6881...

  3. 40 CFR 1065.640 - Flow meter calibration calculations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... 1065.640 Section 1065.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.640 Flow meter... Flow Meters C fCFV β γ exh =1.385 γ dexh = γ air = 1.399 0.000 0.6822 0.6846 0.400 0.6857 0.6881...

  4. The Ion Drift Meter for Dynamics Explorer-B

    NASA Technical Reports Server (NTRS)

    Heelis, R. A.; Hanson, W. B.; Lippincott, C. R.; Zuccaro, D. R.; Harmon, L. H.; Holt, B. J.; Doherty, J. E.; Power, R. A.

    1981-01-01

    The Ion Drift Meter on Dynamics Explorer-B measures two mutually perpendicular angles of arrival of thermal ions with respect to the sensor look direction. These measurements are used to derive two components of the ambient thermal ion drift velocity, which together with the third component from the Retarding Potential Analyzer instrument provide the total velocity. The Ion Drift Meter technique yields high temporal resolution measurements essential in the studies of the convection pattern and energy deposition in the ionosphere.

  5. Integrating seepage heterogeneity with the use of ganged seepage meters

    USGS Publications Warehouse

    Rosenberry, D.O.

    2005-01-01

    The usefulness of standard half-barrel seepage meters for measurement of fluxes between groundwater, and surface water is limited by the small bed area that each measurement represents and the relatively large associated labor costs. Standard half-barrel cylinders were ganged together to allow one measurement of the summed seepage through all of the meters, reducing labor cost and increasing the representative area of measurement. Comparisons of ganged versus individual-meter measurements at two lakes, under both inseepage and outseepage conditions, indicate little loss of efficiency resulting from routing seepage water through the ganging system. Differences between summed and ganged seepage rates were not significant for all but the fastest rates of seepage. At flow rates greater than about 250 mL min-1, ganged values were as low as 80% of summed values. Ganged-meter head losses also were calculated to determine their significance relative to hydraulic-head gradients measured at the field sites. The calculated reduction in hydraulic gradient beneath the seepage meters was significant only for the largest measured seepage rates. A calibration tank was used to determine single-meter and ganged-meter efficiencies compared to known seepage rates. Single-cylinder seepage meters required an average correction factor of 1.05 to convert measured to actual values, whereas the ganged measurements made in the tank required a larger correction factor of 1.14. Although manual measurements were used in these tests, the concept of ganging seepage cylinders also would be useful when used in conjunction with automated flowmeters. ?? 2005, by the American Society of Limnology and Oceanography, Inc.

  6. The Efficiency of the Smoke Meter at Characterizing Engine Emissions

    NASA Technical Reports Server (NTRS)

    Paladino, Jonathan D.

    1997-01-01

    The effectiveness of a smoke meter's ability to characterize the particulate emissions of a jet fuel combustor was evaluated using the University of Missouri-Rolla Mobile Aerosol Sampling System (UMR-MASS). A burner simulating an advanced jet engine combustor design was used to generate typical combustion particulates, which were then analyzed by the smoke meter. The same particulates were then size discriminated to ascertain the effective impact of aerosol diameter on smoke number readings.

  7. [Accuracy of MiniWright peak expiratory flow meters

    PubMed

    Camargos, P A; Ruchkys, V C; Dias, R M; Sakurai, E

    2000-01-01

    OBJECTIVE: To evaluate the accuracy of the Mini-Wright (Clement Clarke International Ltd.) peak-flow meters. METHODS: Twenty of those meters were checked by use of electronic calibration syringe (Jones Flow-Volume Calibrator(R)). Nine of them had an old scale, with values displayed equidistantly, and eleven had a new mechanical scale with non-equidistant values. Each device was connected in series to the calibration syringe to perform eight hand-driven volume injections, with flows ranging from 100 to 700 l/min. Absolute and relative differences between meters and syringe were calculated, the syringe values taken as standard. The accuracy of the twenty Mini-Wright devices was validated by the American Thoracic Society criteria (-/+ 10% or -/+ 20 l/min), and/or European Respiratory Society criteria (-/+ 5% or -/+ 5 l/ min). RESULTS: New scale instruments were more accurate than old scale meters (p < 0.001), by both ATS and ERS criteria. Every meter was rechecked after 600 measurements. Both the old, and the new scale instruments maintained the same level of performance after this evaluation. CONCLUSIONS: Results suggest that new scale meters were accurate and can be safely used in clinical practice. The authors strongly recommend that they are rechecked regularly to ensure that they are within the ATS and ERS variation limits. PMID:14647633

  8. Reynolds number and installation effects on turbine meters

    SciTech Connect

    Park, J.T.

    1995-12-31

    Experimental results are presented for four 100-mm (4-inch) turbine meters from three manufacturers and four models. Tests were performed with nitrogen gas in the Low Pressure Loop of the Gas Research Institute (GRI) Metering Research Facility (MRF). The turbine meters were calibrated gas by binary weighted sonic nozzles which were calibrated against a primary gravimetric standard. Reynolds number effects were determined from operating pressures of 0.206 and 0.793 MPa (30 and 115 psia) and flowrates of 34 to 510 m{sup 3}/h(1,200 to 18,000 acfh). The range for the same Reynolds number at the two pressures was 62,000 to 251,000. The difference in meter factor for the 100-mm (4-inch) meters for two pressures at the same Reynolds number was within {plus_minus}0.4%. The 100-mm meters were also tested in the A.G.A. Report 7 short-coupled installation. The largest difference from the baseline calibration was -0.3%. The small difference appears to be a velocity profile effect of two closely coupled elbows in the same plane with the entering and exiting flow in the same direction.

  9. Ultrasonic meters prove reliability on Nova Gas pipeline

    SciTech Connect

    Rogi, M.

    1995-08-01

    Getting the job done efficiently, safely, and economically are the main reasons Nova Gas Transmission Ltd. (NGTL) of Alberta, Canada looked to an ultrasonic gas flow meter for its flow measurement applications. In the past, NGTL relied mainly on orifice plates to measure mainline flow. In 1990, as a result of an increased requirement for reliable mainline measurement, NGTL initiated a Mainline Measurement Task group to review available metering devices and recommend the best solution. This task group compiled a list of acceptance criteria against which to assess various options. They were looking for mainline measurement devices with high accuracy and performance. After developing the acceptance criteria and researching other pipeline companies in North America and Europe, the Task Group narrowed the list of options to four measurement devices, including two single-path ultrasonic meters. Further evaluation conducted at NGTL`s research facility concluded that the single-path ultrasonic gas flow meter was best suited for NGTL`s system requirements. The single-path ultrasonic gas flow meter, selected by the Task Group, uses direct digital time measurement of the difference between travel times of individual upstream and downstream ultrasonic pulses. This paper reviews the complexity of flow measurements and the types of information that is necessary to accurately calculate flow. The performance and accuracy of the ultrasonic meter are provided based on this company`s experience.

  10. Implementing Project-based Learning in making a weight meter

    NASA Astrophysics Data System (ADS)

    Muliawan, W.; Nahar, W. S.; Sebastian, C. E.; Yuliza, E.; Khairurrijal

    2016-08-01

    Project-based learning (PjBL) is an activity, which can be done individually or in groups, that goes on over a period of time and its objective can be a product, presentation, or performance. It can make students develop their skills and become more engaged in learning because they can solve problems that are met in real life through a project. The project was a weight meter using a d.c. deflection-type bridge circuit and a VU meter, which was realized by a group of three students (the first three authors). We were of the 2nd year of undergraduate physics program that are taking the Measurement and Data Processing Techniques course in the period of January to April 2015. We worked together with our lecturer and tutor as our advisers. In making the weight meter, we have done the following roles in PjBL: 1. Planning the project and setting a timeline, 2. Doing research, 3. Creating first draft, 4. Rewriting the project report, and 5. Submitting the project. Under the guidance of timeline, the project has been completed timely. A force sensing resistor (FSR) sensor was employed to convert a body mass to resistance of the bridge circuit and the VU meter was modified to be a display of the weight meter. The weight meter could be used to measure a body mass up to 5 kg.

  11. 40 CFR 721.9850 - 2,4,8,10-Tetraoxa-3,9-diphosphaspiro[5.5]undecane, 3,9- bis[2,4,6-tris(1,1-dimethylethyl)phenoxy]-.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false 2,4,8,10-Tetraoxa-3,9-diphosphaspiro undecane, 3,9- bis -. 721.9850 Section 721.9850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  12. 40 CFR 721.9850 - 2,4,8,10-Tetraoxa-3,9-diphosphaspiro[5.5]undecane, 3,9- bis[2,4,6-tris(1,1-dimethylethyl)phenoxy]-.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false 2,4,8,10-Tetraoxa-3,9-diphosphaspiro undecane, 3,9- bis -. 721.9850 Section 721.9850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  13. 40 CFR 721.9850 - 2,4,8,10-Tetraoxa-3,9-diphosphaspiro[5.5]undecane, 3,9- bis[2,4,6-tris(1,1-dimethylethyl)phenoxy]-.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false 2,4,8,10-Tetraoxa-3,9-diphosphaspiro undecane, 3,9- bis -. 721.9850 Section 721.9850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  14. 40 CFR 721.9850 - 2,4,8,10-Tetraoxa-3,9-diphosphaspiro[5.5]undecane, 3,9- bis[2,4,6-tris(1,1-dimethylethyl)phenoxy]-.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false 2,4,8,10-Tetraoxa-3,9-diphosphaspiro undecane, 3,9- bis -. 721.9850 Section 721.9850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  15. 40 CFR 721.9850 - 2,4,8,10-Tetraoxa-3,9-diphosphaspiro[5.5]undecane, 3,9-bis[2,4,6-tris(1,1-dimethylethyl)phenoxy]-.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false 2,4,8,10-Tetraoxa-3,9-diphosphaspiro undecane, 3,9-bis -. 721.9850 Section 721.9850 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances...

  16. The AGS Ggamma Meter and Calibrating the Gauss Clock

    SciTech Connect

    Ahrens, Leif

    2014-03-31

    During AGS Polarized Proton acceleration periods, one output from the AGS Ggamma Meter, namely the energy (or Ggamma) calculated from the magnetic field in the AGS main magnets and the beam radius- both measured in particular instant, is used to figure out the times in the AGS magnet acceleration cycle when the beam passes through a particular set of depolarizing resonances. The resonance set occur whenever a particle’s Ggamma (energy*(G/m) becomes nearly equal to n*Qx (i.e. any integer multiplied by the horizontal betatron tune). This deliverable is why the machinery is referred to as the ''Ggamma Meter'' rather than the AGS energy meter. The Ggamma Meter takes as inputs a set of measurements of frequency (F(t)), radius (r(t)), and gauss clock counts (GCC(t)). The other energy (GgammaBr) assumes the field when the gauss clock starts counting is known. The change in field to time t is given by the measured accumulated gauss clock counts multiplied by the gauss clock calibration (gauss/GCC). In order to deal with experimental data, this calibration factor gets an added ad hoc complication, namely a correction dependent on the rate of change the counting rate. The Ggamma meter takes GCC(t) and together with the past history for this cycle calculates B(t).

  17. Comparison of density determination of liquid samples by density meters

    NASA Astrophysics Data System (ADS)

    Buchner, C.; Wolf, H.; Vámossy, C.; Lorefice, S.; Lenard, E.; Spohr, I.; Mares, G.; Perkin, M.; Parlic-Risovic, T.; Grue, L.-L.; Tammik, K.; van Andel, I.; Zelenka, Z.

    2016-01-01

    Hydrostatic density determinations of liquids as reference material are mainly performed by National Metrology Institutes to provide means for calibrating or checking liquid density measuring instruments such as oscillation-type density meters. These density meters are used by most of the metrology institutes for their calibration and scientific work. The aim of this project was to compare the results of the liquid density determination by oscillating density meters of the participating laboratories. The results were linked to CCM.D.K-2 partly via Project EURAMET.M.D.K-2 (1019) "Comparison of liquid density standards" by hydrostatic weighing piloted by BEV in 2008. In this comparison pentadecane, water and of oil with a high viscosity were measured at atmospheric pressure using oscillation type density meter. The temperature range was from 15 °C to 40 °C. The measurement results were in some cases discrepant. Further studies, comparisons are essential to explore the capability and uncertainty of the density meters Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  18. Discuss the testing problems of ultraviolet irradiance meters

    NASA Astrophysics Data System (ADS)

    Ye, Jun'an; Lin, Fangsheng

    2014-09-01

    Ultraviolet irradiance meters are widely used in many areas such as medical treatment, epidemic prevention, energy conservation and environment protection, computers, manufacture, electronics, ageing of material and photo-electric effect, for testing ultraviolet irradiance intensity. So the accuracy of value directly affects the sterile control in hospital, treatment, the prevention level of CDC and the control accuracy of curing and aging in manufacturing industry etc. Because the display of ultraviolet irradiance meters is easy to change, in order to ensure the accuracy, it needs to be recalibrated after being used period of time. By the comparison with the standard ultraviolet irradiance meters, which are traceable to national benchmarks, we can acquire the correction factor to ensure that the instruments working under accurate status and giving the accurate measured data. This leads to an important question: what kind of testing device is more accurate and reliable? This article introduces the testing method and problems of the current testing device for ultraviolet irradiance meters. In order to solve these problems, we have developed a new three-dimensional automatic testing device. We introduce structure and working principle of this system and compare the advantages and disadvantages of two devices. In addition, we analyses the errors in the testing of ultraviolet irradiance meters.

  19. Optical position meters analyzed in the noninertial reference frames

    SciTech Connect

    Tarabrin, Sergey P.; Seleznyov, Alexander A.

    2008-09-15

    In the framework of general relativity we develop a method for the analysis of the operation of the optical position meters in their photodetectors proper reference frames. These frames are noninertial in general due to the action of external fluctuative forces on meters test masses, including detectors. For comparison we also perform the calculations in the laboratory (globally inertial) reference frame and demonstrate that for certain optical schemes laboratory-based analysis results in unmeasurable quantities, in contrast to the detector-based analysis. We also calculate the response of the simplest optical meters to weak plane gravitational waves and fluctuative motions of their test masses. It is demonstrated that for the round-trip meter analysis in both the transverse-traceless (TT) and local Lorentz (LL) gauges produces equal results, while for the forward-trip meter corresponding results differ in accordance with different physical assumptions (e.g. procedure of clocks synchronization) implicitly underlying the construction of the TT and LL gauges.

  20. Direct measurement meter indicates real-time energy flow

    SciTech Connect

    Heyden, W.H.V. )

    1991-05-01

    The increased activity in transporting gas and the use of natural gas from widely varying sources has created a need to simplify measurement of energy transfers in natural gas operations. The natural gas industry requires an energy measurement device that is simple, cost effective and accurate. Such a device must be a direct measurement meter, easy to install, and one which will measure energy transfers in natural gas regardless of volume, composition, heating value, supercompressibility, inert fractions and temperature. These and other factors that are required for what presently is and remains, a calculation of energy in natural gas. The need then, is for a flow device which will measure and indicate direct, real-time energy flow and perform at pipe line conditions. A flow meter has been under development for seven years and has been in field testing for three years at 4 different sites under a Gas Research Institute (GRI) sponsored program. The field test objective is to measure and verify the meter's technical properties under actual field service conditions. In each field test site, the meter is continuously compared to existing gas flow measurement devices. Eact test site has different meter configurations which allow a broad scope of comparison and testing experience.

  1. Remote semi-continuous flow rate logging seepage meter

    NASA Technical Reports Server (NTRS)

    Reay, William G.; Walthall, Harry G.

    1991-01-01

    The movement of groundwater and its associated solutes from upland regions was implicated in the degradation of receiving surface water bodies. Current efforts to directly measure this influx of water incorporate manually operated seepage meters which are hindered by severe limitations. A prototype seepage meter was developed by NASA Langley Research Center and Virginia Polytechnic Institute and State University that will allow for the semi-continuous collection and data logging of seepage flux across the sediment water interface. The meter is designed to operate at depths to 40 meters, and alleviate or minimize all disadvantages associated with traditional methods while remaining cost effective. The unit was designed to operate independently for time periods on the order of weeks with adjustable sample sequences depending upon hydrologic conditions. When used in conjunction with commercially available pressure transducers, this seepage meter allows for correlations to be made between groundwater discharge and tidal/sea state conditions in coastal areas. Field data from the Chesapeake Bay and Florida Bay systems are presented.

  2. Aesthetic and Emotional Effects of Meter and Rhyme in Poetry

    PubMed Central

    Obermeier, Christian; Menninghaus, Winfried; von Koppenfels, Martin; Raettig, Tim; Schmidt-Kassow, Maren; Otterbein, Sascha; Kotz, Sonja A.

    2013-01-01

    Metrical patterning and rhyme are frequently employed in poetry but also in infant-directed speech, play, rites, and festive events. Drawing on four line-stanzas from nineteenth and twentieth German poetry that feature end rhyme and regular meter, the present study tested the hypothesis that meter and rhyme have an impact on aesthetic liking, emotional involvement, and affective valence attributions. Hypotheses that postulate such effects have been advocated ever since ancient rhetoric and poetics, yet they have barely been empirically tested. More recently, in the field of cognitive poetics, these traditional assumptions have been readopted into a general cognitive framework. In the present experiment, we tested the influence of meter and rhyme as well as their interaction with lexicality in the aesthetic and emotional perception of poetry. Participants listened to stanzas that were systematically modified with regard to meter and rhyme and rated them. Both rhyme and regular meter led to enhanced aesthetic appreciation, higher intensity in processing, and more positively perceived and felt emotions, with the latter finding being mediated by lexicality. Together these findings clearly show that both features significantly contribute to the aesthetic and emotional perception of poetry and thus confirm assumptions about their impact put forward by cognitive poetics. The present results are explained within the theoretical framework of cognitive fluency, which links structural features of poetry with aesthetic and emotional appraisal. PMID:23386837

  3. Compensated count-rate circuit for radiation survey meter

    DOEpatents

    Todd, Richard A.

    1981-01-01

    A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

  4. Compensated count-rate circuit for radiation survey meter

    DOEpatents

    Todd, R.A.

    1980-05-12

    A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

  5. Balanced Flow Metering and Conditioning: Technology for Fluid Systems

    NASA Technical Reports Server (NTRS)

    Kelley, Anthony R.

    2006-01-01

    Revolutionary new technology that creates balanced conditions across the face of a multi-hole orifice plate has been developed, patented and exclusively licensed for commercialization. This balanced flow technology simultaneously measures mass flow rate, volumetric flow rate, and fluid density with little or no straight pipe run requirements. Initially, the balanced plate was a drop in replacement for a traditional orifice plate, but testing revealed substantially better performance as compared to the orifice plate such as, 10 times better accuracy, 2 times faster (shorter distance) pressure recovery, 15 times less acoustic noise energy generation, and 2.5 times less permanent pressure loss. During 2004 testing at MSFC, testing revealed several configurations of the balanced flow meter that match the accuracy of Venturi meters while having only slightly more permanent pressure loss. However, the balanced meter only requires a 0.25 inch plate and has no upstream or downstream straight pipe requirements. As a fluid conditioning device, the fluid usually reaches fully developed flow within 1 pipe diameter of the balanced conditioning plate. This paper will describe the basic balanced flow metering technology, provide performance details generated by testing to date and provide implementation details along with calculations required for differing degrees of flow metering accuracy.

  6. A compact orifice meter/flow conditioner package

    SciTech Connect

    Karnik, U.

    1995-12-31

    Flow conditioners have been the center of attention within the natural gas industry for several years. Their importance stems from the fact that, in the presence of existing installations such as elbows, accurate orifice metering can be obtained, within a specified meter length, only if the flow non-uniformities are eliminated. The tube bundle has, thus far, proven to be ineffective in terms of repeatability and reliability. Thus, NOVA embarked on the mission to find a flow conditioner which would, within the shortest possible meter length, provide accurate and repeatable metering. Of the several flow conditioners discussed in the literature, the approach adopted by Laws, based on screen theory, is best suited to achieve the desired results. However, the Laws flow conditioner has some functional flaws, for example, the claim of a fully developed flow with no account for the effect of Reynolds number. Hence, NOVA has re-designed and modified the existing Laws flow conditioner has some functional flaws, for example, the claim of a fully developed flow with no account for the effect of Reynolds number. Hence, NOVA has re-designed and modified the existing Laws flow conditioner using screen theory. This program, initiated in 1991, has resulted in a perforated plate flow conditioner sandwiched in a meter run with an overall length of 13D.

  7. Analyses of characteristics of ring-shaped electrostatic meter

    SciTech Connect

    Zhang, J.Y.; Xu, D.L.; Coulthard, J.; Xu, C.L.; Wang, S.M.

    2010-07-01

    This article describes the characteristics of ring-shaped electrostatic pulverized fuel meters and their applications. At the University of Teesside, UK, the electrostatic technique has been used to measure pulverized fuel flow concentration, velocity, and mass flow rate under lean-phase condition. The mathematic model has been developed to express the relationship between the root-mean-square (rms) value of the meter's output voltage and solids mass flow rate. The effects of solids velocity and particle size on measurements have also been reflected in the model. Furthermore, the model presents the sensitivity variations over the cross-sectional area of meter and along the pipe axis. The article also introduces the research carried out at Southeast University in China, where the technique has been extended to measure dense-phase flow of pulverized coal, which is common in gasification and blast furnaces.

  8. Advanced Metering Implementations - A Perspective from Federal Sector

    SciTech Connect

    Eaarni, Shankar

    2014-08-11

    Federal mandate (EPACT 2005) requires that federal buildings install advanced electrical meters-meters capable of providing data at least daily and measuring the consumption of electricity at least hourly. This work presents selected advanced metering implementations to understand some of the existing practices related to data capture and to understand how the data is being translated into information and knowledge that can be used to improve building energy and operational performance to meet federal energy reduction mandates. This study highlights case studies to represent some of the various actions that are being taken based on the data that are being collected to improve overall energy performance of these buildings. Some of these actions include- individualized tenant billing and energy forecasting, benchmarking, identifying energy conservation measures, measurement and verification.

  9. Problems in comparing particulate spectrometer and visibility meter data.

    PubMed

    Loveland, R B; Lindberg, J D

    1988-10-15

    During the course of a study of vertical profiles of aerosol properties in low stratus clouds, data were acquired simultaneously with particulate spectrometers and with a visibility meter. Calculations made from the particulate data using Mie theory did not agree with extinction as inferred from the visibility meter data when the aerosol extinction was very high or very low. Several possible explanations for this discrepancy were investigated. It was found that the limited acceptance angle of the visibility meter, a form of integrating nephelometer, can contribute to the problem at high extinction values. In low extinction conditions a peculiarity of the electrooptical design of the particulate spectrometer may cause it to lead to serious errors in estimates of aerosol density.

  10. A Randomized Response Model For Privacy Preserving Smart Metering

    PubMed Central

    Cui, Lijuan; Que, Jialan; Choi, Dae-Hyun; Jiang, Xiaoqian; Cheng, Samuel; Xie, Le

    2012-01-01

    The adoption of smart meters may bring new privacy concerns to the general public. Given the fact that metering data of individual homes/factories is accumulated every 15 minutes, it is possible to infer the pattern of electricity consumption of individual users. In order to protect the privacy of users in a completely de-centralized setting (i.e., individuals do not communicate with one another), we propose a novel protocol, which allows individual meters to report the true electricity consumption reading with a pre-determinted probability. Load serving entities (LSE) can reconstruct the total electricity consumption of a region or a district through inference algorithm, but their ability of identifying individual users’ energy consumption pattern is significantly reduced. Using simulated data, we verify the feasibility of the proposed method and demonstrate performance advantages over existing approaches. PMID:23243488

  11. A Randomized Response Model For Privacy Preserving Smart Metering.

    PubMed

    Wang, Shuang; Cui, Lijuan; Que, Jialan; Choi, Dae-Hyun; Jiang, Xiaoqian; Cheng, Samuel; Xie, Le

    2012-09-01

    The adoption of smart meters may bring new privacy concerns to the general public. Given the fact that metering data of individual homes/factories is accumulated every 15 minutes, it is possible to infer the pattern of electricity consumption of individual users. In order to protect the privacy of users in a completely de-centralized setting (i.e., individuals do not communicate with one another), we propose a novel protocol, which allows individual meters to report the true electricity consumption reading with a pre-determinted probability. Load serving entities (LSE) can reconstruct the total electricity consumption of a region or a district through inference algorithm, but their ability of identifying individual users' energy consumption pattern is significantly reduced. Using simulated data, we verify the feasibility of the proposed method and demonstrate performance advantages over existing approaches.

  12. Privacy, technology, and norms: the case of Smart Meters.

    PubMed

    Horne, Christine; Darras, Brice; Bean, Elyse; Srivastava, Anurag; Frickel, Scott

    2015-05-01

    Norms shift and emerge in response to technological innovation. One such innovation is Smart Meters - components of Smart Grid energy systems capable of minute-to-minute transmission of consumer electricity use information. We integrate theory from sociological research on social norms and privacy to examine how privacy threats affect the demand for and expectations of norms that emerge in response to new technologies, using Smart Meters as a test case. Results from three vignette experiments suggest that increased threats to privacy created by Smart Meters are likely to provoke strong demand for and expectations of norms opposing the technology and that the strength of these normative rules is at least partly conditional on the context. Privacy concerns vary little with actors' demographic characteristics. These findings contribute to theoretical understanding of norm emergence and have practical implications for implementing privacy protections that effectively address concerns of electricity users.

  13. Net Metering and Interconnection Procedures-- Incorporating Best Practices

    SciTech Connect

    Jason Keyes, Kevin Fox, Joseph Wiedman, Staff at North Carolina Solar Center

    2009-04-01

    State utility commissions and utilities themselves are actively developing and revising their procedures for the interconnection and net metering of distributed generation. However, the procedures most often used by regulators and utilities as models have not been updated in the past three years, in which time most of the distributed solar facilities in the United States have been installed. In that period, the Interstate Renewable Energy Council (IREC) has been a participant in more than thirty state utility commission rulemakings regarding interconnection and net metering of distributed generation. With the knowledge gained from this experience, IREC has updated its model procedures to incorporate current best practices. This paper presents the most significant changes made to IREC’s model interconnection and net metering procedures.

  14. Privacy, technology, and norms: the case of Smart Meters.

    PubMed

    Horne, Christine; Darras, Brice; Bean, Elyse; Srivastava, Anurag; Frickel, Scott

    2015-05-01

    Norms shift and emerge in response to technological innovation. One such innovation is Smart Meters - components of Smart Grid energy systems capable of minute-to-minute transmission of consumer electricity use information. We integrate theory from sociological research on social norms and privacy to examine how privacy threats affect the demand for and expectations of norms that emerge in response to new technologies, using Smart Meters as a test case. Results from three vignette experiments suggest that increased threats to privacy created by Smart Meters are likely to provoke strong demand for and expectations of norms opposing the technology and that the strength of these normative rules is at least partly conditional on the context. Privacy concerns vary little with actors' demographic characteristics. These findings contribute to theoretical understanding of norm emergence and have practical implications for implementing privacy protections that effectively address concerns of electricity users. PMID:25769852

  15. A Randomized Response Model For Privacy Preserving Smart Metering.

    PubMed

    Wang, Shuang; Cui, Lijuan; Que, Jialan; Choi, Dae-Hyun; Jiang, Xiaoqian; Cheng, Samuel; Xie, Le

    2012-09-01

    The adoption of smart meters may bring new privacy concerns to the general public. Given the fact that metering data of individual homes/factories is accumulated every 15 minutes, it is possible to infer the pattern of electricity consumption of individual users. In order to protect the privacy of users in a completely de-centralized setting (i.e., individuals do not communicate with one another), we propose a novel protocol, which allows individual meters to report the true electricity consumption reading with a pre-determinted probability. Load serving entities (LSE) can reconstruct the total electricity consumption of a region or a district through inference algorithm, but their ability of identifying individual users' energy consumption pattern is significantly reduced. Using simulated data, we verify the feasibility of the proposed method and demonstrate performance advantages over existing approaches. PMID:23243488

  16. Aid to determining freeway metering rates and detecting loop errors

    SciTech Connect

    Nihan, N.L.

    1997-11-01

    A recent freeway congestion prediction study for the Washington Department of Transportation (WSDOT) found that the sum of storage rates over time, SumSR(t), for a freeway section was a better variable for determining the best upstream ramp metering rates than the storage rate for time interval t, SR(t), which is the current WSDOT criterion. (Use of the SumSR(t) variable for this purpose requires that the summation be started during a period of low density flows.) Another finding was that the SumSR(t) variable was a better detector of loop chattering errors than WSDOT`s current criterion, which misses chattering errors that occur at normal traffic volume levels. Since calculation of SumSR(t) is easily incorporated in the current WSDOT ramp metering algorithm, the writer recommends its use in future WSDOT freeway metering schemes.

  17. Construction of the 16 meter Large Lunar Telescope (LLT)

    NASA Technical Reports Server (NTRS)

    Omar, Husam Anwar

    1990-01-01

    The different materials that could be used to design the pedestal for a Moon based 16 meter telescope are discussed. The material that should be used has a low coefficient of thermal expansion, high modulus of elasticity, and high compressive and tensile strengths. For the model developed in this study, an aluminum-manganese alloy was used because of its low coefficient of thermal expansion. Due to variations in lunar soil conditions, both vertically and horizontally, three foundation systems are presented. The spudcan footing can be used in the case where dense soil is more than three meters. The spread footing is recommended where the dense soil is between one and three meters. Finally, in the third system, the Lunar Excursion Vehicle (LEV) is used as a base support for the telescope's pedestal. The LEV support requires a prepared site. The soil should be compacted and stabilized, if necessary, to reduce settlement.

  18. Ultrasonic meters improve NorAm`s custody transfer

    SciTech Connect

    Beeson, J.

    1995-07-01

    Recent developments in digital electronics, signal processing, and enhanced software techniques have re-kindled the natural gas industry`s interest in using ultrasonic meters for custody transfer gas measurement. Throughout the industry, operating companies are actively searching for new ways to do more with less and there is little doubt that within the next five to ten years, the ultrasonic meter will take its rightful place among the acceptable methods for gas measurement. Ultrasonic metering offers many advantages, including: ease of installation; cost savings and improvements in maintenance with self diagnostics; unaffected by buildup of contaminants; fully piggable; bi-directional flow capability; no line pipe restriction; unaffected by pulsation flow. This paper reviews each of these advantages.

  19. A microcomputer based system for current-meter data acquisition

    USGS Publications Warehouse

    Cheng, R.T.; Gartner, J.W.

    1979-01-01

    The U.S. Geological Survey is conducting current measurements as part of an interdisciplinary study of the San Francisco Bay estuarine system. The current meters used in the study record current speed, direction, temperature, and conductivity in digital codes on magnetic tape cartridges. Upon recovery of the current meters, the data tapes are translated by a tape reader into computer codes for further analyses. Quite often the importance of the data processing phase of a current-measurement program is underestimated and downplayed. In this paper a data-processing system which performs the complete data processing and analyses is described. The system, which is configured around an LSI-11 microcomputer, has been assembled to provide the capabilities of data translation, reduction, and tabulation and graphical display immediately following recovery of current meters. The flexibility inherent in a microcomputer has made it available to perform many other research functions which would normally be done on an institutional computer.

  20. Optimal Leaf Positions for SPAD Meter Measurement in Rice

    PubMed Central

    Yuan, Zhaofeng; Cao, Qiang; Zhang, Ke; Ata-Ul-Karim, Syed Tahir; Tian, Yongchao; Zhu, Yan; Cao, Weixing; Liu, Xiaojun

    2016-01-01

    The Soil Plant Analysis Development (SPAD) chlorophyll meter is one of the most commonly used diagnostic tools to measure crop nitrogen status. However, the measurement method of the meter could significantly affect the accuracy of the final estimation. Thus, this research was undertaken to develop a new methodology to optimize SPAD meter measurements in rice (Oryza sativa L.). A flatbed color scanner was used to map the dynamic chlorophyll distribution and irregular leaf shapes. Calculus algorithm was adopted to estimate the potential positions for SPAD meter measurement along the leaf blade. Data generated by the flatbed color scanner and SPAD meter were analyzed simultaneously. The results suggested that a position 2/3 of the distance from the leaf base to the apex (2/3 position) could represent the chlorophyll content of the entire leaf blade, as indicated by the relatively low variance of measurements at that position. SPAD values based on di-positional leaves and the extracted chlorophyll a and b contents were compared. This comparison showed that the 2/3 position on the lower leaves tended to be more sensitive to changes in chlorophyll content. Finally, the 2/3 position and average SPAD values of the fourth fully expanded leaf from the top were compared with leaf nitrogen concentration. The results showed the 2/3 position on that leaf was most suitable for predicting the nitrogen status of rice. Based on these results, we recommend making SPAD measurements at the 2/3 position on the fourth fully expanded leaf from the top. The coupling of dynamic chlorophyll distribution and irregular leaf shapes information can provide a promising approach for the calibration of SPAD meter measurement, which can further benefit the in situ nitrogen management by providing reliable estimation of crops nitrogen nutrition status. PMID:27303416

  1. Development and Evaluation of an Ultrasonic Groundwater Seepage Meter

    NASA Astrophysics Data System (ADS)

    Paulsen, R. J.; Smith, C. F.; O'Rourke, D.; Wong, T.; Bokuniewicz, H.

    2001-05-01

    Submarine groundwater discharge can influence significantly the near-shore transport and flux of chemicals into the oceans. Quantification of the sources and rates of such discharge requires a groundwater seepage meter that provides continuous measurements at high resolution over an extended period of time. An ultrasonic flow meter has been adapted for such measurements in the submarine environment. Connected to a steel collection funnel, the meter houses two piezoelectric transducers mounted at opposite ends of a cylindrical flow tube. By monitoring the perturbations of fluid flow on the propagation of sound waves inside the flow tube, the ultrasonic meter can measure both forward and reverse fluid flows in real time. Laboratory and field calibrations show that the ultrasonic meter can resolve groundwater discharges on the order of 0.1 μ m/s, and it is sufficiently robust for deployment in the field for several days. Data from West Neck Bay, Shelter Island, New York elucidate the temporal and spatial heterogeneity of submarine groundwater discharge and its interplay with tidal loading. A negative correlation between the discharge and tidal elevation was generally observed. A methodology was also developed whereby data for the sound velocity as a function of temperature can be used to infer the salinity and source of the submarine discharge. Independent measurements of electrical conductance were performed to validate this methodology. This meter has also been deployed as part of an international groundwater seepage intercomparison experiment with Scientific Committee on Oceanic Research (SCOR) / Land-Ocean Interaction in the Coastal Zone (LOICZ) Working Group 112. Results are in good agreement with other methodologies developed to quantify submarine groundwater discharge.

  2. Optimal Leaf Positions for SPAD Meter Measurement in Rice.

    PubMed

    Yuan, Zhaofeng; Cao, Qiang; Zhang, Ke; Ata-Ul-Karim, Syed Tahir; Tian, Yongchao; Zhu, Yan; Cao, Weixing; Liu, Xiaojun

    2016-01-01

    The Soil Plant Analysis Development (SPAD) chlorophyll meter is one of the most commonly used diagnostic tools to measure crop nitrogen status. However, the measurement method of the meter could significantly affect the accuracy of the final estimation. Thus, this research was undertaken to develop a new methodology to optimize SPAD meter measurements in rice (Oryza sativa L.). A flatbed color scanner was used to map the dynamic chlorophyll distribution and irregular leaf shapes. Calculus algorithm was adopted to estimate the potential positions for SPAD meter measurement along the leaf blade. Data generated by the flatbed color scanner and SPAD meter were analyzed simultaneously. The results suggested that a position 2/3 of the distance from the leaf base to the apex (2/3 position) could represent the chlorophyll content of the entire leaf blade, as indicated by the relatively low variance of measurements at that position. SPAD values based on di-positional leaves and the extracted chlorophyll a and b contents were compared. This comparison showed that the 2/3 position on the lower leaves tended to be more sensitive to changes in chlorophyll content. Finally, the 2/3 position and average SPAD values of the fourth fully expanded leaf from the top were compared with leaf nitrogen concentration. The results showed the 2/3 position on that leaf was most suitable for predicting the nitrogen status of rice. Based on these results, we recommend making SPAD measurements at the 2/3 position on the fourth fully expanded leaf from the top. The coupling of dynamic chlorophyll distribution and irregular leaf shapes information can provide a promising approach for the calibration of SPAD meter measurement, which can further benefit the in situ nitrogen management by providing reliable estimation of crops nitrogen nutrition status. PMID:27303416

  3. Measurement of stray light and glare: comparison of Nyktotest, Mesotest, stray light meter, and computer implemented stray light meter

    PubMed Central

    van Rijn, L J; Nischler, C; Gamer, D; Franssen, L; de Wit, G; Kaper, R; Vonhoff, D; Grabner, G; Wilhelm, H; Völker-Dieben, H J; van den Berg, T J T P

    2005-01-01

    Aim: To evaluate the properties of devices for measuring stray light and glare: the Nyktotest, Mesotest, “conventional” stray light meter and a new, computer implemented version of the stray light meter. Methods: 112 subjects, divided in three groups: (1) young subjects without any eye disease; (2) elderly subjects without any eye disease, and (3) subjects with (early) cataract in at least one eye. All subjects underwent a battery of glare and stray light tests, measurement of visual acuity, contrast sensitivity, refraction, and LOCS III cataract classification. Subjects answered a questionnaire on perceived disability during driving. Results: Repeatability values were similar for all glare/stray light tests. Validity (correlation with LOCS III and questionnaire scores), discriminative ability (ability to discriminate between the three groups), and added value (to measurement of visual acuity and contrast sensitivity) were all superior for both stray light meters. Results of successive measurements are interrelated for the conventional but not the new stray light meter. This indicates a better resistance to fraud for the latter device. Conclusions: The new computer implemented stray light meter is the most promising device for future stray light measurements. PMID:15722317

  4. EDD-7 Electric Charge Point Meter test results

    SciTech Connect

    Mersman, C.R.

    1993-09-01

    The results of tests evaluating the electric switching portion of the EDD-7 Electric Charge Point Meter (ECPM) are presented. The ECPM is a modified parking meter that allows the purchase of 120 or 240 volt electric power. The ECPM is designed to make electricity available at any vehicle parking location. The test results indicate that the ECPM operated without failure thru a series of over current and ground fault tests at three different test temperatures. The magnitude of current required to trip the over current protection circuitry varied with temperature while the performance of the ground fault interruption circuitry did not change significantly with the test temperature.

  5. Thermal emissivity analysis of a GEMINI 8-meter telescopes design

    NASA Technical Reports Server (NTRS)

    St. Clair Dinger, Ann

    1993-01-01

    The GEMINI 8-meter Telescopes Project is designing twin 8-meter telescopes to be located in Hawaii and Chile. The GEMINI telescopes will have interchangeable secondary mirrors for use in the visible and IR. The APART/PADE program is being used to evaluate the effective IR emissivity of the IR configuration plus enclosure as a function of mirror contamination at three IR wavelengths. The goal is to design a telescope whose effective IR emissivity is no more than 2 percent when the mirrors are clean.

  6. Reflection-Type Oil-Film Skin-Friction Meter

    NASA Technical Reports Server (NTRS)

    Bandyopadhyay, Promode R.; Weinstein, Leonard M.

    1993-01-01

    Oil-film skin-friction meter for both flight and wind-tunnel applications uses internal reflection and is self-contained, compact unit. Contained in palm-sized housing, in which source of light, mirrors, and sensor mounted rigidly in alignment. Entire unit mounted rigidly under skin of aircraft or wind tunnel, eliminating any relative vibration between optical elements and skin of aircraft or wind tunnel. Meter primarily applicable to flight and wind-tunnel tests, also used in chemical-processing plants.

  7. Wintertime current meter measurements from the East China Sea

    SciTech Connect

    Trump, C.L.; Burt, W.V.

    1981-09-01

    An array of three current meters were anchored on the continental shelf of the East China Sea during the last half of February 1975 as part of the Japanese Air Mass Transformation Experiment, AMTEX-75. The results indicate that the currents are dominated by the rotational semidiurnal M/sub 2/ tidal component superimposed on a slow mean drift to the northeast. Differences in direction of several days duration between two of the current meters suggest the presence of transient mesoscale eddies or meanders in the flow regime.

  8. Multiphase pumps and flow meters -- Status of field testing

    SciTech Connect

    Skiftesvik, P.K.; Svaeren, J.A.

    1995-12-31

    With the development and qualification of multiphase pumps and multiphase flow meters, two new tools have been made available to the oil and gas industry for enhanced production from existing installations or new field developments. This paper presents an overview of the major achievements gained from various test installations carried out the last years using equipment qualified by Framo Engineering AS. The experience from the extensive Field Verification Programmes as described shows that multiphase pumps and meters can operate in various and often harsh well environments providing significant well stream pressure boost or acceptable phase accuracy measurements of oil, water and gas.

  9. Comparative Analysis of Smart Meters Deployment Business Models on the Example of the Russian Federation Markets

    NASA Astrophysics Data System (ADS)

    Daminov, Ildar; Tarasova, Ekaterina; Andreeva, Tatyana; Avazov, Artur

    2016-02-01

    This paper presents the comparison of smart meter deployment business models to determine the most suitable option providing smart meters deployment. Authors consider 3 main business model of companies: distribution grid company, energy supplier (energosbyt) and metering company. The goal of the article is to compare the business models of power companies from massive smart metering roll out in power system of Russian Federation.

  10. 40 CFR 1065.245 - Sample flow meter for batch sampling.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... laminar flow element, an ultrasonic flow meter, a subsonic venturi, a critical-flow venturi or multiple... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Sample flow meter for batch sampling... Sample flow meter for batch sampling. (a) Application. Use a sample flow meter to determine sample......

  11. 46 CFR 162.050-19 - Oil content meter and bilge alarm test rig.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 6 2012-10-01 2012-10-01 false Oil content meter and bilge alarm test rig. 162.050-19... § 162.050-19 Oil content meter and bilge alarm test rig. (a) This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described...

  12. 49 CFR 192.355 - Customer meters and regulators: Protection from damage.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Customer meters and regulators: Protection from... Meters, Service Regulators, and Service Lines § 192.355 Customer meters and regulators: Protection from... that houses a customer meter or regulator at a place where vehicular traffic is anticipated, must...

  13. 46 CFR 162.050-19 - Oil content meter and bilge alarm test rig.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 6 2011-10-01 2011-10-01 false Oil content meter and bilge alarm test rig. 162.050-19... § 162.050-19 Oil content meter and bilge alarm test rig. (a) This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described...

  14. 49 CFR 192.355 - Customer meters and regulators: Protection from damage.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Customer meters and regulators: Protection from... Meters, Service Regulators, and Service Lines § 192.355 Customer meters and regulators: Protection from... that houses a customer meter or regulator at a place where vehicular traffic is anticipated, must...

  15. 46 CFR 162.050-19 - Oil content meter and bilge alarm test rig.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 6 2013-10-01 2013-10-01 false Oil content meter and bilge alarm test rig. 162.050-19... § 162.050-19 Oil content meter and bilge alarm test rig. (a) This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described...

  16. 49 CFR 192.355 - Customer meters and regulators: Protection from damage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Customer meters and regulators: Protection from... Meters, Service Regulators, and Service Lines § 192.355 Customer meters and regulators: Protection from... that houses a customer meter or regulator at a place where vehicular traffic is anticipated, must...

  17. 46 CFR 162.050-19 - Oil content meter and bilge alarm test rig.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 6 2014-10-01 2014-10-01 false Oil content meter and bilge alarm test rig. 162.050-19... § 162.050-19 Oil content meter and bilge alarm test rig. (a) This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described...

  18. Review of literature on the testing of point-velocity current meters

    USGS Publications Warehouse

    Thibodeaux, K.G.

    1994-01-01

    The U.S. Geological Survey is in the process of evaluating point-velocity current meters. As part of this evaluation process, a review of the literature pertaining to the testing of point-velocity current meters was conducted. A listing of current-meter testing found in the literature was compiled and is grouped according to the type of meter tested and the type of test conducted. Meter types included in the review were vertical- and horizontal-axis mechanical current meters and electromagnetic acoustic electronic current meters. Laser current meters are not included in the review because there are no practical laser meter designs for field velocity measurements. The results of the literature review indicated that there has not been a comprehensive testing of the commonly available current meters since the 1920's.

  19. The Astronomical Telescope of New York: a new 12-meter astronomical telescope

    NASA Astrophysics Data System (ADS)

    Sebring, T.; Junquist, R.; Stutzki, C.; Sebring, P.; Baum, S.

    2012-09-01

    The Astronomical Corporation of New York has commissioned a study of a 12-meter class telescope to be developed by a group of NY universities. The telescope concept builds on the basic principles established by the Keck telescopes; segmented primary mirror, Ritchey Chretien Nasmyth instrument layout, and light weight structures. New, lightweight, and low cost approaches are proposed for the primary mirror architecture, dome structure and mechanisms, telescope mount approach, and adaptive optics. Work on the design is supported by several NY based corporations and universities. The design offers a substantially larger aperture than any existing Visible/IR wavelength telescope at historically low cost. The concept employs an adaptive secondary mirror and laser guide star adaptive optics. Two First Light instruments are proposed; A High resolution near infrared spectrograph and a near infrared Integral field spectrograph/imager.

  20. Look at the Beat, Feel the Meter: Top–Down Effects of Meter Induction on Auditory and Visual Modalities

    PubMed Central

    Celma-Miralles, Alexandre; de Menezes, Robert F.; Toro, Juan M.

    2016-01-01

    Recent research has demonstrated top–down effects on meter induction in the auditory modality. However, little is known about these effects in the visual domain, especially without the involvement of motor acts such as tapping. In the present study, we aim to assess whether the projection of meter on auditory beats is also present in the visual domain. We asked 16 musicians to internally project binary (i.e., a strong-weak pattern) and ternary (i.e., a strong-weak-weak pattern) meter onto separate, but analog, visual and auditory isochronous stimuli. Participants were presented with sequences of tones or blinking circular shapes (i.e., flashes) at 2.4 Hz while their electrophysiological responses were recorded. A frequency analysis of the elicited steady-state evoked potentials allowed us to compare the frequencies of the beat (2.4 Hz), its first harmonic (4.8 Hz), the binary subharmonic (1.2 Hz), and the ternary subharmonic (0.8 Hz) within and across modalities. Taking the amplitude spectra into account, we observed an enhancement of the amplitude at 0.8 Hz in the ternary condition for both modalities, suggesting meter induction across modalities. There was an interaction between modality and voltage at 2.4 and 4.8 Hz. Looking at the power spectra, we also observed significant differences from zero in the auditory, but not in the visual, binary condition at 1.2 Hz. These findings suggest that meter processing is modulated by top–down mechanisms that interact with our perception of rhythmic events and that such modulation can also be found in the visual domain. The reported cross-modal effects of meter may shed light on the origins of our timing mechanisms, partially developed in primates and allowing humans to synchronize across modalities accurately. PMID:27047358

  1. Look at the Beat, Feel the Meter: Top-Down Effects of Meter Induction on Auditory and Visual Modalities.

    PubMed

    Celma-Miralles, Alexandre; de Menezes, Robert F; Toro, Juan M

    2016-01-01

    Recent research has demonstrated top-down effects on meter induction in the auditory modality. However, little is known about these effects in the visual domain, especially without the involvement of motor acts such as tapping. In the present study, we aim to assess whether the projection of meter on auditory beats is also present in the visual domain. We asked 16 musicians to internally project binary (i.e., a strong-weak pattern) and ternary (i.e., a strong-weak-weak pattern) meter onto separate, but analog, visual and auditory isochronous stimuli. Participants were presented with sequences of tones or blinking circular shapes (i.e., flashes) at 2.4 Hz while their electrophysiological responses were recorded. A frequency analysis of the elicited steady-state evoked potentials allowed us to compare the frequencies of the beat (2.4 Hz), its first harmonic (4.8 Hz), the binary subharmonic (1.2 Hz), and the ternary subharmonic (0.8 Hz) within and across modalities. Taking the amplitude spectra into account, we observed an enhancement of the amplitude at 0.8 Hz in the ternary condition for both modalities, suggesting meter induction across modalities. There was an interaction between modality and voltage at 2.4 and 4.8 Hz. Looking at the power spectra, we also observed significant differences from zero in the auditory, but not in the visual, binary condition at 1.2 Hz. These findings suggest that meter processing is modulated by top-down mechanisms that interact with our perception of rhythmic events and that such modulation can also be found in the visual domain. The reported cross-modal effects of meter may shed light on the origins of our timing mechanisms, partially developed in primates and allowing humans to synchronize across modalities accurately. PMID:27047358

  2. A biogas meter with adjustable resolution and minimal back-pressure.

    PubMed

    Smith, Simon A; Stöckle, Claudio O

    2008-11-01

    A new biogas meter was developed to satisfy the need for an adjustable resolution meter that has minimal back-pressure and wide flow rate capability. The new meter had three main components; a timed bellows pump that delivered fixed volumes, a pressure sensor, and a data logger. The meter was built from off-the-shelf components and was thus easy to build and cost effective. The meter also proved to be accurate, precise, sensitive, and simple to calibrate.

  3. Pilot Class Testing: Statistics.

    ERIC Educational Resources Information Center

    Washington Univ., Seattle. Washington Foreign Language Program.

    Statistics derived from test score data from the pilot classes participating in the Washington Foreign Language Program are presented in tables in this report. An index accompanies the tables, itemizing the classes by level (FLES, middle, and high school), grade test, language skill, and school. MLA-Coop test performances for each class were…

  4. First-Class Inquiry

    ERIC Educational Resources Information Center

    Hesser, Kathi; Buck, Gayle; Dopp, Sandra

    2005-01-01

    In the activity described in this article, students will explore how variables in a first-class lever, specifically arm length, position of the fulcrum, and placement of the load, affect the effort needed to lift the load. To begin the lesson, demonstrate to the class how a first-class lever works and review what is meant by the terms fulcrum,…

  5. Girls' Class, Infinite Possibilities.

    ERIC Educational Resources Information Center

    Ost, Nancy

    1999-01-01

    The co-director of a small independent school describes Girls' Class, which she created in order to have a special time together with the girls in grades 6 through 8. The class provides guidance and celebrates spirituality and the beginning of menses for the young women. To end the class, each person says a positive self-affirmation and gives…

  6. 40 CFR 1065.220 - Fuel flow meter.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... exhaust molar flow rate's actual calculated value: (i) For feedback control of a proportional sampling... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Fuel flow meter. 1065.220 Section 1065.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION...

  7. 40 CFR 1065.220 - Fuel flow meter.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... exhaust molar flow rate's actual calculated value: (i) For feedback control of a proportional sampling... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Fuel flow meter. 1065.220 Section 1065.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION...

  8. Rhythm's Gonna Get You: Regular Meter Facilitates Semantic Sentence Processing

    ERIC Educational Resources Information Center

    Rothermich, Kathrin; Schmidt-Kassow, Maren; Kotz, Sonja A.

    2012-01-01

    Rhythm is a phenomenon that fundamentally affects the perception of events unfolding in time. In language, we define "rhythm" as the temporal structure that underlies the perception and production of utterances, whereas "meter" is defined as the regular occurrence of beats (i.e. stressed syllables). In stress-timed languages such as German, this…

  9. 40 CFR 92.122 - Smoke meter calibration.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Smoke meter calibration. 92.122... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.122 Smoke... test: (a) The zero control shall be adjusted under conditions of “no smoke” to give a recorder or...

  10. 40 CFR 92.122 - Smoke meter calibration.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Smoke meter calibration. 92.122... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.122 Smoke... test: (a) The zero control shall be adjusted under conditions of “no smoke” to give a recorder or...

  11. 40 CFR 92.122 - Smoke meter calibration.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Smoke meter calibration. 92.122... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.122 Smoke... test: (a) The zero control shall be adjusted under conditions of “no smoke” to give a recorder or...

  12. 20. CHECK, TURNOUT, SIPHON AND METERING EQUIPMENT FOR DELIVERY FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. CHECK, TURNOUT, SIPHON AND METERING EQUIPMENT FOR DELIVERY FROM BASE LINE WASTE DITCH TO KYRENE DITCH AT EAST 1/4 CORNER, SECTION 12, T1S-R4E July 7, 1921 - Western Canal, South side of Salt River between Tempe, Phoenix & Mesa, Mesa, Maricopa County, AZ

  13. Development of the 15 meter diameter hoop column antenna

    NASA Technical Reports Server (NTRS)

    1986-01-01

    The building of a deployable 15-meter engineering model of the 100 meter antenna based on the point-design of an earlier task of this contract, complete with an RF-capable surface is described. The 15 meter diameter was selected so that the model could be tested in existing manufacturing, near-field RF, thermal vacuum, and structural dynamics facilities. The antenna was designed with four offset paraboloidal reflector surfaces with a focal length of 366.85 in and a primary surface accuracy goal of .069 in rms. Surface adjustment capability was provided by manually resetting the length of 96 surface control cords which emanated from the lower column extremity. A detailed description of the 15-meter Hoop/Column Antenna, major subassemblies, and a history of its fabrication, assembly, deployment testing, and verification measurements are given. The deviation for one aperture surface (except the outboard extremity) was measured after adjustments in follow-on tests at the Martin Marietta Near-field Facility to be .061 in; thus the primary surface goal was achieved.

  14. Performance evaluation of cognitive radio in advanced metering infrastructure communication

    NASA Astrophysics Data System (ADS)

    Hiew, Yik-Kuan; Mohd Aripin, Norazizah; Din, Norashidah Md

    2016-03-01

    Smart grid is an intelligent electricity grid system. A reliable two-way communication system is required to transmit both critical and non-critical smart grid data. However, it is difficult to locate a huge chunk of dedicated spectrum for smart grid communications. Hence, cognitive radio based communication is applied. Cognitive radio allows smart grid users to access licensed spectrums opportunistically with the constraint of not causing harmful interference to licensed users. In this paper, a cognitive radio based smart grid communication framework is proposed. Smart grid framework consists of Home Area Network (HAN) and Advanced Metering Infrastructure (AMI), while AMI is made up of Neighborhood Area Network (NAN) and Wide Area Network (WAN). In this paper, the authors only report the findings for AMI communication. AMI is smart grid domain that comprises smart meters, data aggregator unit, and billing center. Meter data are collected by smart meters and transmitted to data aggregator unit by using cognitive 802.11 technique; data aggregator unit then relays the data to billing center using cognitive WiMAX and TV white space. The performance of cognitive radio in AMI communication is investigated using Network Simulator 2. Simulation results show that cognitive radio improves the latency and throughput performances of AMI. Besides, cognitive radio also improves spectrum utilization efficiency of WiMAX band from 5.92% to 9.24% and duty cycle of TV band from 6.6% to 10.77%.

  15. N.A.C.A. Recording Air Speed Meter

    NASA Technical Reports Server (NTRS)

    Norton, F H

    1921-01-01

    A new type of air speed meter is described which was designed by the technical staff of the National Advisory Committee for Aeronautics. The instrument consists essentially of a tight metal diaphragm of high natural period which is acted upon by the pressure difference of a pitot-static head. The resulting deflection of this diaphragm is recorded optically on a moving film.

  16. A novel metered dose transdermal spray formulation for oxybutynin.

    PubMed

    Bakshi, A; Bajaj, A; Malhotra, G; Madan, M; Amrutiya, N

    2008-11-01

    The objective of the present work was to develop a metered dose spray formulation for transdermal delivery of oxybutynin and to carry out the in vitro characterization of the optimized formulation. Oxybutynin release from a series of ethanol/acetone/methylal based formulations was assessed in vitro and the developed formulation was used for delivery from a metered dose spray. Various qualitative and quantitative parameters like spray pattern, particle size distribution, pH, evaporation time, pump seal efficiency test, average weight per metered dose, content per spray and content uniformity were evaluated. The different film forming agents were assessed and carbopol (0.5%) and lutrol (0.1%) were found to give good clarity of solution, evaporation rate, spray pattern and tackiness of the film. Diffusion studies of the optimized formulations through the semipermeable membrane showed the release of drug to the extent of almost 50% over a period of 24 h. Stability studies were conducted as per ICH guidelines and indicated that formulations were stable. Skin irritation studies were performed using rabbit as an animal model. The results obtained show that the metered dose transdermal spray formulation can be a promising and innovative therapeutic system for the transdermal administration of oxybutynin. PMID:21369433

  17. A novel metered dose transdermal spray formulation for oxybutynin.

    PubMed

    Bakshi, A; Bajaj, A; Malhotra, G; Madan, M; Amrutiya, N

    2008-11-01

    The objective of the present work was to develop a metered dose spray formulation for transdermal delivery of oxybutynin and to carry out the in vitro characterization of the optimized formulation. Oxybutynin release from a series of ethanol/acetone/methylal based formulations was assessed in vitro and the developed formulation was used for delivery from a metered dose spray. Various qualitative and quantitative parameters like spray pattern, particle size distribution, pH, evaporation time, pump seal efficiency test, average weight per metered dose, content per spray and content uniformity were evaluated. The different film forming agents were assessed and carbopol (0.5%) and lutrol (0.1%) were found to give good clarity of solution, evaporation rate, spray pattern and tackiness of the film. Diffusion studies of the optimized formulations through the semipermeable membrane showed the release of drug to the extent of almost 50% over a period of 24 h. Stability studies were conducted as per ICH guidelines and indicated that formulations were stable. Skin irritation studies were performed using rabbit as an animal model. The results obtained show that the metered dose transdermal spray formulation can be a promising and innovative therapeutic system for the transdermal administration of oxybutynin.

  18. A Novel Metered Dose Transdermal Spray Formulation for Oxybutynin

    PubMed Central

    Bakshi, A.; Bajaj, A.; Malhotra, G.; Madan, M.; Amrutiya, N.

    2008-01-01

    The objective of the present work was to develop a metered dose spray formulation for transdermal delivery of oxybutynin and to carry out the in vitro characterization of the optimized formulation. Oxybutynin release from a series of ethanol/acetone/methylal based formulations was assessed in vitro and the developed formulation was used for delivery from a metered dose spray. Various qualitative and quantitative parameters like spray pattern, particle size distribution, pH, evaporation time, pump seal efficiency test, average weight per metered dose, content per spray and content uniformity were evaluated. The different film forming agents were assessed and carbopol (0.5%) and lutrol (0.1%) were found to give good clarity of solution, evaporation rate, spray pattern and tackiness of the film. Diffusion studies of the optimized formulations through the semipermeable membrane showed the release of drug to the extent of almost 50% over a period of 24 h. Stability studies were conducted as per ICH guidelines and indicated that formulations were stable. Skin irritation studies were performed using rabbit as an animal model. The results obtained show that the metered dose transdermal spray formulation can be a promising and innovative therapeutic system for the transdermal administration of oxybutynin. PMID:21369433

  19. 40 CFR 1066.625 - Flow meter calibration calculations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... flow meter according to 40 CFR 1065.640 instead if you calculate emissions based on molar flow rates... described in 40 CFR 1065.602. (4) Repeat the procedure in paragraphs (a)(1) through (3) of this section for... H2O in the dilution air or calibration air, determined as described in 40 CFR 1065.645. M H2O =...

  20. Path-averaged differential meter of atmospheric turbulence parameters

    NASA Astrophysics Data System (ADS)

    Antoshkin, L. V.; Botygina, N. N.; Emaleev, O. N.; Konyaev, P. A.; Lukin, V. P.

    2010-10-01

    A path-averaged differential meter of the structure constant of the atmospheric refractive index, C {/n 2}, has been developed and tested. The results of a model numerical experiment on measuring C {/n 2} and the horizontal component of average wind velocity transverse to the path are reported.

  1. 40 CFR 1065.225 - Intake-air flow meter.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Intake-air flow meter. 1065.225 Section 1065.225 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.225...

  2. Hydrostatic bearings for a turbine fluid flow metering device

    DOEpatents

    Fincke, James R.

    1982-01-01

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion.

  3. Continuous flow measurements using ultrasonic velocity meters - an update

    USGS Publications Warehouse

    Oltmann, Rick

    1995-01-01

    An article in the summer 1993 Newsletter described USGS work to continously monitor tidal flows in the delta using ultrasonic velocity meters.  This article updates progress since 1993, including new installations, results of data analysis, damage during this year's high flows, and the status of each site.

  4. 18 CFR 367.9020 - Account 902, Meter reading expenses.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Operation and Maintenance Expense Chart of Accounts § 367.9020 Account 902, Meter reading expenses. (a) This account must include the cost of labor, materials used and expenses incurred in...

  5. Observations from moored current meters in San Francisco Bay, 1978

    USGS Publications Warehouse

    Gartner, Jeffrey W.; Cheng, Ralph T.

    1981-01-01

    Current-meter data collected at eight stations in the San Francisco Bay estuarine system between August 1978 and December 1978 are compiled in this report. The measurements include current speed and direction, and water temperature and salinity (computed from conductivity and temperature). Data are presented in graphical format with each parameter plotted separately.

  6. 18 CFR 367.9020 - Account 902, Meter reading expenses.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Operation and Maintenance Expense Chart of Accounts § 367.9020 Account 902, Meter reading expenses. (a) This account must include the cost of labor, materials used and expenses incurred in...

  7. 18 CFR 367.9020 - Account 902, Meter reading expenses.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Operation and Maintenance Expense Chart of Accounts § 367.9020 Account 902, Meter reading expenses. (a) This account must include the cost of labor, materials used and expenses incurred in...

  8. 18 CFR 367.9020 - Account 902, Meter reading expenses.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Operation and Maintenance Expense Chart of Accounts § 367.9020 Account 902, Meter reading expenses. (a) This account must include the cost of labor, materials used and expenses incurred in...

  9. 18 CFR 367.9020 - Account 902, Meter reading expenses.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... reading expenses. 367.9020 Section 367.9020 Conservation of Power and Water Resources FEDERAL ENERGY... GAS ACT Operation and Maintenance Expense Chart of Accounts § 367.9020 Account 902, Meter reading expenses. (a) This account must include the cost of labor, materials used and expenses incurred in...

  10. Hydrostatic bearings for a turbine fluid flow metering device

    DOEpatents

    Fincke, J.R.

    1982-05-04

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion. 3 figs.

  11. Capillary flow meter for calibrating spinning rotor gauges

    SciTech Connect

    Berg, Robert F.

    2008-09-15

    This article describes a capillary flow meter whose maximum flow rate of 0.2 {mu}mol/s ({approx}0.2 cm{sup 3}/min at ambient conditions) covers the range that is useful for calibrating spinning rotor gauges. Knowing the input pressure, output pressure, and temperature of the capillary yields the gas flow rate with a relative standard uncertainty as small as 0.04%. The flow meter, which requires no moving parts aside from valves, comprises a ballast tank, a coil of quartz capillary with an inner diameter of 0.1 mm, and a commercial instrumentation package. Measurements near 0.1 {mu}mol/s showed agreement with an independent primary flow meter to within 0.2%, comparable to the combined relative standard uncertainty of 0.11%. Additional measurements showed that operating the capillary flow meter with an exit pressure less than 1 kPa allowed the flow to stabilize within minutes. However, the small exit pressure caused an unexpected enhancement of the slip correction in the hydrodynamic model of the capillary.

  12. Comparison Test and its Evaluation of Flowmeters for Heat Meter

    NASA Astrophysics Data System (ADS)

    Choi, Hae-Man; Choi, Yong-Moon; Yoon, Byung-Ro

    2010-06-01

    This study selected a total of 24 heat flowmeters consisting of three types: impeller, electromagnetic and ultrasonic, 8 meters each. The diameter was 0.05 m (9 meters), 0.08 m (9 meters), and 0.15 m (6 meters). In accordance with the OIML R 75 testing method accuracy, installation position, external environment, and durability were tested, and the flowmeter property field test was conducted in the field where of heat supply from winter to summer in order to select the type of heat flowmeter best suited for the circumstances in Korea. According to the test result, all 3 types of flowmeters met the OIML Recommendation, but the result of the field test showed that the electromagnetic flowmeters displayed a deviation at the low flow rate during summer. The impeller flowmeters showed accuracy suggested by the OIML Recommendation, but the ultrasonic flowmeter, a next-generation flowmeter, which is strong against contamination, low in maintenance-rate, and high in accuracy as it has no moving part, was found to be the best choice.

  13. Volumetric system calibrates meters for large flow rates

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Volumetric system calibrates meters used for large liquid flow rates. The system employs trip probes and equipment to time the flow of liquid from a tare vessel into a calibrated vessel. This calibration system is used in the petroleum and chemical industries.

  14. Wet gas flow modeling for a vertically mounted Venturi meter

    NASA Astrophysics Data System (ADS)

    Xu, Lijun; Zhou, Wanlu; Li, Xiaomin

    2012-04-01

    Venturi meters are playing an increasingly important role in wet gas metering in natural gas and oil industries. Due to the effect of liquid in a wet gas, the differential pressure over the converging section of a Venturi meter is higher than that when a pure gas flows through with the same flow rate. This phenomenon is referred to as over-reading. Thus, a correction for the over-reading is required. Most of the existing wet gas models are more suitable for higher pressure (>2 MPa) than lower pressure (<1 MPa). Much attention has been paid on higher quality (>0.5) than lower quality (<0.5) in recent years. However, conditions of lower pressure and lower quality also widely exist in the gas and oil industries. By comparing the performances of eight existing wet gas models in low-pressure range of 0.26-0.86 MPa and low-quality range of 0.07-0.36 with a vertically mounted Venturi meter of diameter ratio 0.45, de Leeuw's model was proven to perform best. Derived from de Leeuw's model, a modified model with better performance for the low-pressure and low-quality ranges was obtained. Experimental data showed that the root mean square of the relative errors of the over-reading was 2.30%.

  15. Index of Refraction Measurements Using a Laser Distance Meter

    ERIC Educational Resources Information Center

    Ochoa, Romulo; Fiorillo, Richard; Ochoa, Cris

    2014-01-01

    We present a simple method to determine the refractive indices of transparent media using a laser distance meter. Indices of refraction have been obtained by measuring the speed of light in materials. Some speed of light techniques use time-of-flight measurements in which pulses are emitted by lasers and the time interval is measured for the pulse…

  16. Closeup view of a general electric company demand meter which ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Close-up view of a general electric company demand meter which formerly monitored railroad power usage obtained from Philadelphia Electric Company sources. - Thirtieth Street Station, Load Dispatch Center, Thirtieth & Market Streets, Railroad Station, Amtrak (formerly Pennsylvania Railroad Station), Philadelphia, Philadelphia County, PA

  17. Note: A real-time beam current density meter

    SciTech Connect

    Liu Junliang; Yu Deyang; Ruan Fangfang; Xue Yingli; Wang Wei

    2013-03-15

    We have developed a real-time beam current density meter for charged particle beams. It measures the mean current density by collimating a uniform and large diameter primary beam. The suppression of the secondary electrons and the deflection of the beam were simulated, and it was tested with a 105 keV Ar{sup 7+} ion beam.

  18. Accent on Meter: A Handbook for Readers of Poetry

    ERIC Educational Resources Information Center

    Powell, Joseph; Halperin, Mark

    2004-01-01

    This book offers practical ways of teaching students about the close connections between the meaning, rhythm, and meter in poetry. The major assumption of the book is that a close reading of a poem--one that explores the nuances of structure--can increase one's appreciation and enjoyment of poetry. In the words of the authors, "What the poem is…

  19. Advanced optical smoke meters for jet engine exhaust measurement

    NASA Technical Reports Server (NTRS)

    Pitz, R. W.

    1986-01-01

    Smoke meters with increased sensitivity, improved accuracy, and rapid response are needed to measure the smoke levels emitted by modern jet engines. The standard soiled tape meter in current use is based on filtering, which yields long term averages and is insensitive to low smoke levels. Two new optical smoke meter techniques that promise to overcome these difficulties have been experimentally evaluated: modulated transmission (MODTRAN) and photothermal deflection spectroscopy (PDS). Both techniques are based on light absorption by smoke, which is closely related to smoke density. They are variations on direct transmission measurements which produce a modulated signal that can be easily measured with phase sensitive detection. The MODTRAN and PDS techniques were tested on low levels of smoke and diluted samples of NO2 in nitrogen, simulating light adsorption due to smoke. The results are evaluated against a set of ideal smoke meter criteria that include a desired smoke measurement range of 0.1 to 12 mg cu.m. (smoke numbers of 1 to 50) and a frequency response of 1 per second. The MODTRAN instrument is found to be inaccurate for smoke levels below 3 mg/cu.m. and is able to make a only about once every 20 seconds because of its large sample cell. The PDS instrument meets nearly all the characteristics of an ideal smoke meter: it has excellent sensitivity over a range of smoke levels from 0.1 to 20 mg/cu.m. (smoke numbers of 1 to 60) and good frequency response (1 per second).

  20. Long Baseline Tilt Meter Array to Monitor Cascadia's Slow Earthquakes

    NASA Astrophysics Data System (ADS)

    Suszek, N.; Bilham, R.; Flake, R.; Melbourne, T. I.; Miller, M.

    2004-12-01

    Five biaxial Michelson tilt meters are currently being installed in the Puget Lowlands near Seattle to monitor dynamic tilt changes accompanying episodic slow earthquakes that occur at 20-40 km depth. Each tilt meter consists of a 1-2 m deep, 500-m-long, 15-cm diameter, horizontal, half-filled water-pipe, terminated by float sensors with sub-micron water-level resolution, similar to those that have operated unattended for the past decade within the Long Valley caldera. The sensors measure water height relative to the base of a pile driven to 10 m depth. A wide-body LVDT attached to this pile outside the reservoir, senses the motion of the core attached to the float within. The voltage indicating the position of the core is sampled 16 times a second, and digitally filtered before transmission via radio modem for storage as 1-minute samples in a remote computer. The computer gathers 16-bit water height, vault temperature, air pressure and various housekeeping data once per minute using remote telemetry. Installed during 2004, the first of the tilt meters, installed in 2004, float sensors at each end, and one in the center of each pipe, permit us to examine tilt signal coherence and local noise. Each adjacent pair of sensors has a tilt resolution of 2e-9 and a range of 8 microradians. We anticipate tilt signals with durations of 0.3-30 days, and amplitudes of less than 0.1 microradian associated with slow earthquakes. Anticipated noise levels in the tilt meters are 10-1000 times lower that these expected signals, similar to or better than signal-to-noise levels from planned strain meters of the PBO array.