Science.gov

Sample records for a-570-832 pure magnesium

  1. 76 FR 69284 - Pure Magnesium From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ... COMMISSION Pure Magnesium From China Determination On the basis of the record \\1\\ developed in the subject... order on pure magnesium from China would be likely to lead to continuation or recurrence of material... USITC Publication 4274 (October 2011), entitled Pure Magnesium from China: Investigation No....

  2. 77 FR 59979 - Pure Magnesium (Granular) From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... this five-year review. Background The Commission instituted this review on February 1, 2012 (77 FR 5049) and determined on May 7, 2012 that it would conduct an expedited review (77 FR 32668, June 1, 2012... COMMISSION Pure Magnesium (Granular) From China Determination On the basis of the record \\1\\ developed in...

  3. Buffer-regulated biocorrosion of pure magnesium.

    PubMed

    Kirkland, Nicholas T; Waterman, Jay; Birbilis, Nick; Dias, George; Woodfield, Tim B F; Hartshorn, Richard M; Staiger, Mark P

    2012-02-01

    Magnesium (Mg) alloys are being actively investigated as potential load-bearing orthopaedic implant materials due to their biodegradability in vivo. With Mg biomaterials at an early stage in their development, the screening of alloy compositions for their biodegradation rate, and hence biocompatibility, is reliant on cost-effective in vitro methods. The use of a buffer to control pH during in vitro biodegradation is recognised as critically important as this seeks to mimic pH control as it occurs naturally in vivo. The two different types of in vitro buffer system available are based on either (i) zwitterionic organic compounds or (ii) carbonate buffers within a partial-CO(2) atmosphere. This study investigated the influence of the buffering system itself on the in vitro corrosion of Mg. It was found that the less realistic zwitterion-based buffer did not form the same corrosion layers as the carbonate buffer, and was potentially affecting the behaviour of the hydrated oxide layer that forms on Mg in all aqueous environments. Consequently it was recommended that Mg in vitro experiments use the more biorealistic carbonate buffering system when possible.

  4. 77 FR 5049 - Pure Magnesium From China; Institution of a Five-Year Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-01

    ... duty order on imports of pure magnesium in granular form from China (66 FR 57936). Following expedited... continuation of the antidumping duty order on imports of pure magnesium in granular form from China (72 FR 5417..., subparts A, D, E, and F (19 CFR part 207), as most recently amended at 74 FR 2847 (January 16, 2009)....

  5. 76 FR 7813 - Amended Final Results of the 2008-2009 Antidumping Duty Administrative Review: Pure Magnesium...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    ...-2009 Antidumping Duty Administrative Review of the Antidumping Duty Order, 75 FR 80791 (December 23... chemistry, form or size, unless expressly excluded from the scope of this order. Pure magnesium is a metal... materials into magnesium metal. Pure primary magnesium is used primarily as a chemical in the...

  6. Low-temperature electron irradiation and annealing in pure magnesium

    SciTech Connect

    Simester, J.H.

    1982-01-01

    In this study of magnesium after 1.0 MeV electron irradiations at 1.55/sup 0/K, it has been observed that the damage production rate in Mg is (3.57 +- 0.03) x 10/sup -26/ ..cap omega..cm/(e/sup -/ cm/sup 2/). There is no evidence for thermal annealing up to 4/sup 0/K. The low temperature recovery in magnesium is found to consist of two broad substages between 4 to 14/sup 0/K, both of which exhibit evidence for correlated and uncorrelated recovery processes. The two substages are found to have very different frequency factors for annealing, and there is evidence that the recovery processes in the second substage are influenced by those in the first. A model for recovery is proposed using the split configuration in the plane which explains the first substage as being due to interstitial migration in the basal plane and the second to migration perpendicular to the plane.

  7. Proteomic profile of mouse fibroblasts exposed to pure magnesium extract.

    PubMed

    Zhen, Zhen; Luthringer, Bérengère; Yang, Li; Xi, Tingfei; Zheng, Yufeng; Feyerabend, Frank; Willumeit, Regine; Lai, Chen; Ge, Zigang

    2016-12-01

    Magnesium and its alloys gain wide attention as degradable biomaterials. In order to reveal the molecular mechanism of the influence of biodegradable magnesium on cells, proteomics analysis was performed in this work. After mouse fibroblasts (L929) were cultured with or without Mg degradation products (Mg-extract) for 8, 24, and 48h, changes in protein expression profiles were obtained using isobaric tags for relative and absolute quantitation (iTRAQ) coupled two dimensional liquid chromatography-tandem mass spectrometry (2D LC MS/MS). A total of 867 proteins were identified (relying on at least two peptides). Compared to the control group, 205, 282, and 217 regulated proteins were identified at 8, 24, and 48h, respectively. 65 common proteins were up or down- regulated within all the three time points, which were involved in various physiological and metabolic activities. Consistent with viability, proliferation, and cell cycle analysis, stimulated energy metabolism as well as protein synthesis pathways were discussed, indicating a possible effect of Mg-extract on L929 proliferation. Furthermore, endocytosis and focal adhesion processes were also discussed. This proteomics study uncovers early cellular mechanisms triggered by Mg degradation products and highlights the cytocompatibility of biodegradable metallic materials for biomedical applications such as stents or orthopaedic implants. PMID:27612743

  8. 76 FR 53408 - Pure Magnesium From the People's Republic of China: Rescission of Antidumping Duty Administrative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ... Countervailing Duty Administrative Reviews and Request for Revocation in Part, 76 FR 37781 (June 28, 2011... Department certifying that it did not export pure magnesium for consumption in the United States during the...; Opportunity To Request Administrative Review, 76 FR 24458 (May 2, 2011). \\4\\ See letter from U.S....

  9. 77 FR 32668 - Pure Magnesium (Granular) From China; Scheduling of an Expedited Five-Year Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-01

    ... party group response to its notice of institution (77 FR 5049, February 1, 2012) of the subject five.... See 76 FR 61937 (October 6, 2011) and the newly revised Commission's Handbook on E-Filing, available... COMMISSION Pure Magnesium (Granular) From China; Scheduling of an Expedited Five-Year Review AGENCY:...

  10. 76 FR 31635 - Pure Magnesium From China; Institution of a Five-Year Review Concerning the Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ... recently amended at 74 FR 2847 (January 16, 2009). \\1\\ No response to this request for information is... Department of Commerce issued an antidumping duty order on imports of pure magnesium from China (60 FR 25691... issued a continuation of the antidumping duty order on imports of pure magnesium from China (65 FR...

  11. 77 FR 33165 - Pure Magnesium in Granular Form From the People's Republic of China: Final Results of Expedited...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-05

    ... expedited review of this order. \\1\\ See Initiation of Five-Year (``Sunset'') Review, 77 FR 4995 (February 1... Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May 12... pure magnesium in granular form. See Notice of Scope Rulings and Anticircumvention Inquiries, 68...

  12. 75 FR 51002 - Pure Magnesium In Granular Form from the People's Republic of China: Initiation of Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-18

    ...: Pure Magnesium in Granular Form From the People's Republic of China, 66 FR 57936 (November 19, 2001... Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May 12, 1995). The scope of this order... of Initiation of Changed Circumstances Review, 74 FR 19934 (April 30, 2009). \\7\\ See, e.g., Notice...

  13. 75 FR 63440 - Pure Magnesium From the People's Republic of China: Extension of Time for the Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-15

    ..., 2009. See Pure Magnesium from the People's Republic of China: Preliminary Results of the 2008-2009 Antidumping Duty Administrative Review, 75 FR 34689 (June 18, 2010). The final results of review are currently... International Trade Administration Pure Magnesium From the People's Republic of China: Extension of Time for...

  14. 76 FR 62040 - Pure Magnesium From the People's Republic of China: Final Results of Expedited Third Sunset...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-06

    ... Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May 12..., pursuant to section 751(c) of the Act. See Initiation of Five-Year ``Sunset'' Review, 76 FR 31588 (June 1... International Trade Administration Pure Magnesium From the People's Republic of China: Final Results...

  15. Laser Surface Alloying of Copper, Manganese, and Magnesium with Pure Aluminum Substrate

    NASA Astrophysics Data System (ADS)

    Jiru, Woldetinsay G.; Sankar, M. Ravi; Dixit, Uday S.

    2016-03-01

    Laser surface alloying is one of the recent technologies used in the manufacturing sector for improving the surface properties of the metals. Light weight materials like aluminum alloys, titanium alloys, and magnesium alloys are used in the locomotive, aerospace, and structural applications. In the present work, an experimental study was conducted to improve the surface hardness of commercially pure aluminum plate. CO2 laser is used to melt pre-placed powders of pure copper, manganese, and magnesium. Microstructure of alloyed surface was analyzed using optical microscope. The best surface alloying was obtained at the optimum values of laser parameters, viz., laser power, scan speed, and laser beam diameter. In the alloyed region, microhardness increased from 30 HV0.5 to 430 HV0.5, while it was 60 HV0.5 in the heat-affected region. Tensile tests revealed some reduction in the strength and total elongation due to alloying. On the other hand, corrosion resistance improved.

  16. Biodegradable polymer for sealing porous PEO layer on pure magnesium: An in vitro degradation study

    NASA Astrophysics Data System (ADS)

    Alabbasi, Alyaa; Mehjabeen, Afrin; Kannan, M. Bobby; Ye, Qingsong; Blawert, Carsten

    2014-05-01

    An attempt was made to seal the porous silicate-based plasma electrolytic oxidation (PEO) layer on pure magnesium (Mg) with a biodegradable polymer, poly(L-lactide) (PLLA), to delay the localized degradation of magnesium-based implants in body fluid for better in-service mechanical integrity. Firstly, a silicate-based PEO coating on pure magnesium was performed using a pulsed constant current method. In order to seal the pores in the PEO layer, PLLA was coated using a two-step spin coating method. The performance of the PEO-PLLA Mg was evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The EIS results showed that the polarization resistance (Rp) of the PEO-PLLA Mg was close to two orders of magnitude higher than that of the PEO Mg. While the corrosion current density (icorr) of the pure Mg was reduced by 65% with the PEO coating, the PEO-PLLA coating reduced the icorr by almost 100%. As expected, the Rp of the PEO-PLLA Mg decreased with increase in exposure time. However, it was noted that the Rp of the PEO-PLLA Mg even after 100 h was six times higher than that of the PEO Mg after 48 h exposure, and did not show any visible localized attack.

  17. 75 FR 2108 - Pure Magnesium from the People's Republic of China: Extension of Time for the Preliminary Results...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-14

    ... Request Administrative Review, 74 FR 20278 (May 1, 2009). Respondent, Tianjin Magnesium International Co... Reviews and Requests for Revocation in Part, 74 FR 30052 (June 24, 2009). Currently, the preliminary... International Trade Administration Pure Magnesium from the People's Republic of China: Extension of Time for...

  18. Rates of in vivo (arterial) and in vitro biocorrosion for pure magnesium.

    PubMed

    Bowen, Patrick K; Drelich, Adam; Drelich, Jaroslaw; Goldman, Jeremy

    2015-01-01

    The development of magnesium-based materials for bioabsorbable stents relies heavily on corrosion testing by immersion in pseudophysiological solutions, where magnesium degrades faster than it does in vivo. The quantitative difference in corrosion kinetics in vitro and in vivo is largely unknown, but, if determined, would help reduce dependence on animal models. In order to create a quantitative in vitro-in vivo correlation based on an accepted measure of corrosion (penetration rate), commercially pure magnesium wires were corroded in vivo in the abdominal aortas of rats for 5-32 days, and in vitro for up to 14 days using Dulbecco's modified eagle medium. Cross-sectioning, scanning electron microscopy, image analysis, a modified penetration rate tailored to degraded wires, and empirical modeling were used to analyze the corroded specimens. In vitro penetration rates were consistently higher than comparable in vivo rates by a factor of 1.2-1.9× (±0.2×). For a sample <20% corroded, an approximate in vitro-in vivo multiplier of 1.3 ± 0.2× was applied, whereas a multiplier of 1.8 ± 0.2× became appropriate when the magnesium specimen was 25-35% degraded.

  19. Tension-compression-tension tertiary twins in coarse-grained polycrystalline pure magnesium at room temperature

    DOE PAGES

    Yu, Qin; Jiang, Yanyao; Wang, Jian

    2015-04-07

    Using electron backscatter diffraction, the microstructural features of tension–compression–tension (T–C–T) tertiary twins are studied in coarse-grained pure polycrystalline magnesium subjected to monotonic compression along the extrusion direction in ambient air. T–C–T tertiary twins are developed due to the formation of a compression–tension double twin inside a primary tension twin. All the observed T–C–T twin variants are of TiCjTj type. TiCi+1Ti+1 (or TiCi–1Ti–1) variants are observed more frequently than TiCi+2Ti+2 (or TiCi–2Ti–2) variants. Moreover, the number of tertiary twin lamellae increases with the applied compressive strain.

  20. Computational modeling of dynamic mechanical properties of pure polycrystalline magnesium under high loading strain rates

    NASA Astrophysics Data System (ADS)

    Li, Qizhen

    2015-09-01

    Computational simulations were performed to investigate the dynamic mechanical behavior of pure polycrystalline magnesium under different high loading strain rates with the values of 800, 1000, 2000, and 3600 s-1. The Johnson-Cook model was utilized in the simulations based on finite element modeling. The results showed that the simulations provided well-matched predictions of the material behavior such as the strain rate-time history, the stress-strain curve, and the temperature increase. Under high loading strain rates, the tested material experienced linear strain hardening at the early stage of plastic deformation, increased strain hardening at the intermediate plastic deformation region, and decreased strain hardening at the region before fracture. The strain hardening rates for the studied high loading strain rate cases do not vary much with the change of strain rates.

  1. 76 FR 33194 - Pure Magnesium From the People's Republic of China: Preliminary Results of the 2009-2010...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ... Fair Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691...; Opportunity To Request Administrative Review, 75 FR 23236 (May 3, 2010). \\3\\ See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Requests for Revocation in Part, 75 FR 37759 (June 30, 2010)....

  2. 77 FR 71578 - Pure Magnesium in Granular Form From the People's Republic of China; Final Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... Administrative Review, 77 FR 46030 (August 2, 2012) (``Preliminary Results''). We invited interested parties to... Administrative Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005... Antidumping Duty Order: Pure Magnesium in Granular Form from the People's Republic of China, 66 FR...

  3. 76 FR 1404 - Pure Magnesium in Granular Form From the People's Republic of China: Rescission of Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... People's Republic of China, 66 FR 57936 (November 19, 2001) (``Pure Magnesium in Granular Form Order... Circumstances Review, 75 FR 51002, (August 18, 2010) (``Initiation of CCR''). DATES: Effective Date: January 10... Granular Form Order, 66 FR 57936. \\4\\ See Initiation of CCR, 75 FR at 51003. On August 23, 2010,...

  4. 77 FR 28570 - Pure Magnesium From the People's Republic of China: Notice of Court Decision Not in Harmony With...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-15

    ...On April 25, 2012, the United States Court of International Trade (``CIT'') sustained the Department of Commerce's (``the Department'') final results of redetermination pursuant to voluntary remand of the 2006-2007 antidumping duty administrative review of pure magnesium from the People's Republic of China (``Voluntary Remand Redetermination'').\\1\\ Consistent with the decision of the United......

  5. In vitro corrosion of pure magnesium and AZ91 alloy—the influence of thin electrolyte layer thickness

    PubMed Central

    Zeng, Rong-Chang; Qi, Wei-Chen; Zhang, Fen; Li, Shuo-Qi

    2016-01-01

    In vivo degradation predication faces a huge challenge via in vitro corrosion test due to the difficulty for mimicking the complicated microenvironment with various influencing factors. A thin electrolyte layer (TEL) cell for in vitro corrosion of pure magnesium and AZ91 alloy was presented to stimulate the in vivo corrosion in the micro-environment built by the interface of the implant and its neighboring tissue. The results demonstrated that the in vivo corrosion of pure Mg and the AZ91 alloy was suppressed under TEL condition. The AZ91 alloy was more sensitive than pure Mg to the inhibition of corrosion under a TEL thickness of less than 200 µm. The TEL thickness limited the distribution of current, and thus localized corrosion was more preferred to occur under TEL condition than in bulk solution. The TEL cell might be an appropriate approach to simulating the in vivo degradation of magnesium and its alloys. PMID:26816655

  6. Tension-compression-tension tertiary twins in coarse-grained polycrystalline pure magnesium at room temperature

    SciTech Connect

    Yu, Qin; Jiang, Yanyao; Wang, Jian

    2015-04-07

    Using electron backscatter diffraction, the microstructural features of tension–compression–tension (T–C–T) tertiary twins are studied in coarse-grained pure polycrystalline magnesium subjected to monotonic compression along the extrusion direction in ambient air. T–C–T tertiary twins are developed due to the formation of a compression–tension double twin inside a primary tension twin. All the observed T–C–T twin variants are of TiCjTj type. TiCi+1Ti+1 (or TiCi–1Ti–1) variants are observed more frequently than TiCi+2Ti+2 (or TiCi–2Ti–2) variants. Moreover, the number of tertiary twin lamellae increases with the applied compressive strain.

  7. Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium

    NASA Astrophysics Data System (ADS)

    Biswas, Somjeet; Singh, D. Satyaveer; Beausir, Benoît; Toth, Laszlo S.; Suwas, Satyam

    2015-06-01

    This paper deals with dynamic recrystallization (DRX), static recrystallization, and grain growth phenomena of pure magnesium after equal channel angular pressing (ECAP) by route A and BC at 523 K (250 °C) followed by 80 pct cold rolling. The ECAP-deformed and the subsequently rolled samples were annealed at 373 K and 773 K (100 °C and 500 °C). The associated changes in the microstructure and texture were studied using electron back-scattered diffraction. ECAP produced an average grain size of ~12 to 18 µm with B and C2 fiber textures. Subsequent rolling led to an average grain size ~8 to 10 µm with basal texture fiber parallel to ND. There was no noticeable increase in the average grain size on annealing at 373 K (100 °C). However, significant increase in the average grain size occurred at 773 K (500 °C). The occurrence of different DRX mechanisms was detected: discontinuous dynamic recrystallization was attributed to basal slip activity and continuous dynamic recovery and recrystallization to prismatic/pyramidal slip systems. Only continuous static recrystallization could be observed on annealing.

  8. Magnesium

    MedlinePlus

    ... after taking a dietary supplement that contains magnesium. Diuretics can either increase or decrease the loss of magnesium through urine, depending on the type of diuretic. Prescription drugs used to ease symptoms of acid ...

  9. 76 FR 72172 - Continuation of Antidumping Duty Order: Pure Magnesium From the People's Republic of China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-22

    ..., zirconium and rare earths. Excluded from the scope of the order are alloy primary magnesium (that meets... ``Sunset'' Review, 76 FR 31588 (June 1, 2011). As a result of its review, the Department determined that... Expedited Third Sunset Review of the Antidumping Duty Order, 76 FR 62040 (October 6, 2011). On October...

  10. Magnesium

    NASA Astrophysics Data System (ADS)

    Bechtel, H.; Bulian, W.; Bungardt, K.; Gürs, K.; Gürs, U.; Helling, W.; Kyri, H.; Laue, H. J.; Mahler, W.; Matting, A.; Meyer, F. R.; Mialki, W.; Ritter, F.; Ruge, J.; Saur, G.; Simon, W.; Strnat, K.; Weber, R.; Weigand, H. H.; Weik, H.; Ziesler, H.; Borchers, Heinz; Schmidt, Ernst

    Magnesium wird überwiegend durch Schmelzflußelektrolyse hergestellt. Das dabei anfallende Reinmagnesium hat einen Mg-Gehalt von etwa 99,9%. Hauptbeimengung ist das Eisen; Silizium und Aluminium sind nur in Spuren vorhanden. Der Anwendungsumfang des Reinmagnesiums ist gering; dagegen werden Magnesiumlegierungen zunehmend, insbesondere für den Druckguß verwendet. Neben den bis etwa zum Jahre 1950 allein gebräuchlichen Mg-Mn-, Mg-Al- und Mg-Al-Zn-Legierungen werden heute mehr und mehr die besonders warmfesten Legierungen mit Zusätzen von Zirkon, Thorium und Seltenen Erden hergestellt (siehe dazu auch Abschnitt Seltene Erden). Als Umhüllungsmaterial für Uranstäbe dient die Legierung Magnox A 12, die nach [H 3] neben 1 % Al noch geringe Mengen an Ca und Ba enthält. In den in Deutschland üblichen Kurzzeichen (DIN 1729) werden die chemischen Symbole und der ungefähre Gehalt der wichtigsten Legierungselemente angegeben. Gußlegierungen werden zusätzlich durch ein G (Sandguß oder Kokillenguß) oder ein D (Druckguß) gekennzeichnet (siehe Tab. 5).

  11. 76 FR 47147 - Pure Magnesium in Granular Form From the People's Republic of China: Rescission of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ... Revocation in Part, 75 FR 81565 (December 28, 2010) (``Initiation''). \\2\\ See Memorandum to the File... Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 75 FR 67079 (November 1, 2010). \\4\\ See Initiation, 75 FR at 81569. \\5\\ See letter from CMN, ``Pure...

  12. 77 FR 46030 - Pure Magnesium in Granular Form From the People's Republic of China: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-02

    ... Countervailing Duty Administrative Reviews and Request for Revocation In Part, 76 FR 82268 (December 30, 2011... FR 67413 (November 1, 2011). \\3\\ See Initiation. In the Initiation, the Department stated that if a... Russian Federation, 60 FR 25691 (May 12, 1995). The scope of this order includes imports of pure...

  13. Electrodeposition of magnesium and magnesium/aluminum alloys

    DOEpatents

    Mayer, A.

    1988-01-21

    Electrolytes and plating solutions for use in processes for electroplating and electroforming pure magnesium and alloys of aluminum and magnesium and also electrodeposition processes. An electrolyte of this invention is comprised of an alkali metal fluoride or a quaternary ammonium halide, dimethyl magnesium and/or diethyl magnesium, and triethyl aluminum and/or triisobutyl aluminum. An electrolyte may be dissolved in an aromatic hydrocarbon solvent to form a plating solution. The proportions of the component compounds in the electrolyte are varied to produce essentially pure magnesium or magnesium/aluminum alloys having varying selected compositions.

  14. Electrodeposition of magnesium and magnesium/aluminum alloys

    DOEpatents

    Mayer, Anton

    1988-01-01

    Electrolytes and plating solutions for use in processes for electroplating and electroforming pure magnesium and alloys of aluminum and magnesium and also electrodeposition processes. An electrolyte of this invention is comprised of an alkali metal fluoride or a quaternary ammonium halide, dimethyl magnesium and/or diethyl magnesium, and triethyl aluminum and/or triisobutyl aluminum. An electrolyte may be dissolved in an aromatic hydrocarbon solvent to form a plating solution. The proportions of the component compounds in the electrolyte are varied to produce essentially pure magnesium or magnesium/aluminum alloys having varying selected compositions.

  15. Magnesium Gluconate

    MedlinePlus

    Magnesium gluconate is used to treat low blood magnesium. Low blood magnesium is caused by gastrointestinal disorders, prolonged vomiting or ... disease, or certain other conditions. Certain drugs lower magnesium levels as well.This medication is sometimes prescribed ...

  16. Degradation and biological properties of Ca-P contained micro-arc oxidation self-sealing coating on pure magnesium for bone fixation

    PubMed Central

    Wang, Weidan; Wan, Peng; Liu, Chen; Tan, Lili; Li, Weirong; Li, Lugee; Yang, Ke

    2015-01-01

    Poor corrosion resistance is one of the main disadvantages for biodegradable magnesium-based metals, especially applied for bone fixation, where there is a high demand of bio-mechanical strength and stability. Surface coating has been proved as an effective method to control the in vivo degradation. In this study a Ca-P self-sealing micro-arc oxidation (MAO) coating was studied to verify its efficacy and biological properties by in vitro and in vivo tests. It was found that the MAO coating could effectively retard the degradation according to immersion and electrochemical tests as well as 3D reconstruction by X-ray tomography after implantation. The MAO coating exhibited no toxicity and could stimulate the new bone formation. Therefore, the Ca-P self-sealing MAO coating could be a potential candidate for application of biodegradable Mg-based implant in bone fixations. PMID:26816635

  17. Magnesium basics

    PubMed Central

    Ketteler, Markus

    2012-01-01

    As a cofactor in numerous enzymatic reactions, magnesium fulfils various intracellular physiological functions. Thus, imbalance in magnesium status—primarily hypomagnesaemia as it is seen more often than hypermagnesaemia—might result in unwanted neuromuscular, cardiac or nervous disorders. Measuring total serum magnesium is a feasible and affordable way to monitor changes in magnesium status, although it does not necessarily reflect total body magnesium content. The following review focuses on the natural occurrence of magnesium and its physiological function. The absorption and excretion of magnesium as well as hypo- and hypermagnesaemia will be addressed. PMID:26069819

  18. Magnesium Hydroxide

    MedlinePlus

    Magnesium hydroxide is used on a short-term basis to treat constipation.This medication is sometimes prescribed ... Magnesium hydroxide come as a tablet and liquid to take by mouth. It usually is taken as ...

  19. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap through Combined Refining and Solid Oxide Membrane Electrolysis Processes

    SciTech Connect

    Xiaofei Guan; Peter A. Zink; Uday B. Pal; Adam C. Powell

    2012-01-01

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.% Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the magnesium content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapor. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium.

  20. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap Through Combined Refining and Solid Oxide Membrane (SOM) Electrolysis Processes

    SciTech Connect

    Guan, Xiaofei; Zink, Peter; Pal, Uday

    2012-03-11

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.%Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the Mg content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapors in a separate condenser. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium; could not collect and weigh all of the magnesium recovered.

  1. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2010-01-01

    Seawater and natural brines accounted for about 40 percent of U.S. magnesium compounds production in 2009. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Chemicals in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover, and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta from its operation mentioned above.

  2. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2011-01-01

    Seawater and natural brines accounted for about 54 percent of U.S. magnesium compounds production in 2010. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash-Wendover and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its operation mentioned above.

  3. Magnesium Oxide

    MedlinePlus

    ... different reasons. Some people use it as an antacid to relieve heartburn, sour stomach, or acid indigestion. ... stomach.Do not take magnesium oxide as an antacid for longer than 2 weeks unless your doctor ...

  4. Production of magnesium metal

    DOEpatents

    Blencoe, James G [Harriman, TN; Anovitz, Lawrence M [Knoxville, TN; Palmer, Donald A [Oliver Springs, TN; Beard, James S [Martinsville, VA

    2010-02-23

    A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

  5. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2012-01-01

    Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash Wendover LLC and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma Inc. in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its brine operation in Michigan.

  6. Production of magnesium metal

    DOEpatents

    Blencoe, James G.; Anovitz, Lawrence M.; Palmer, Donald A.; Beard, James S.

    2012-04-10

    A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention also relates to the magnesium metal produced by the processes described herein.

  7. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2002-01-01

    Seawater and natural brines accounted for about 60% of US magnesium compounds production in 2001. Dead-burned and caustic-calcined magnesias were recovered from seawater in Florida by Premier Chemicals. They were also recovered from Michigan well brines by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And Premier Chemicals recovered dead-burned and caustic-calcined magnesias from magnesite in Nevada. Reilly Industries and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah.

  8. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2007-01-01

    Seawater and natural brines accounted for about 52 percent of U.S. magnesium compounds production in 2006. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from sea-water by Premier Chemicals in Florida; from well brines in Michigan by Martin Marietta and Rohm and Haas; and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from brucite by Applied Chemical Magnesias in Texas, from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta and Rohm and Haas from their operations mentioned above. About 59 percent of the magnesium compounds consumed in the United States was used for refractories that are used mainly to line steelmaking furnaces. The remaining 41 percent was consumed in agricultural, chemical, construction, environmental and industrial applications.

  9. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2004-01-01

    Dead-burned and caustic-calcined magnesias were recovered from seawater by Premier Chemicals in Florida; from well brines in Michigan by Dow Chemical, Martin Marietta Magnesia Specialties, and Rohm & Haas; and from magnesite in Nevada by Premier Chemicals. Reilly Industries and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah.

  10. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2001-01-01

    Seawater and natural brines accounted for about 63% of US magnesium compounds production during 2000. Premier Services in Florida, Dow Chemical in Michigan, Martin Marietta Magnesia Specialties, and Rohm & Haas recovered dead-burned and caustic-calcined magnesias from seawater. And Premier Services' recoveries, in Nevada, were from magnasite.

  11. Corrosion in Magnesium and a Magnesium Alloy

    NASA Astrophysics Data System (ADS)

    Akavipat, Sanay

    Magnesium and a magnesium alloy (AZ91C) have been ion implanted over a range of ions energies (50 to 150 keV) and doses (1 x 10('16) to 2 x 10('17) ions/cm('2)) to modify the corrosion properties of the metals. The corrosion tests were done by anodic polarization in chloride -free and chloride-containing aqueous solutions of a borated -boric acid with a pH of 9.3. Anodic polarization measurements showed that some implantations could greatly reduce the corrosion current densities at all impressed voltages and also increased slightly the pitting potential, which indicated the onset of the chloride attack. These improvements in corrosion resistance were caused by boron implantations into both types of samples. However, iron implantations were found to improve only the magnesium alloy. To study the corrosion in more detail, Scanning Auger Microprobe Spectrometer (SAM), Scanning Electron Microscope (SEM) with an X-ray Energy Spectrometry (XES) attachment, and Transmission Electron Microscope (TEM) measurements were used to analyze samples before, after, and at various corrosion stages. In both the unimplanted pure magnesium and AZ91C samples, anodic polarization results revealed that there were three active corrosion stages (Stages A, C, and E) and two passivating stages (Stages B and D). Examination of Stages A and B in both types of samples showed that only a mild, generalized corrosion had occurred. In Stage C of the TD samples, a pitting breakdown in the initial oxide film was observed. In Stage C of the AZ91C samples, galvanic and intergranular attack around the Mg(,17)Al(,12) intermetallic islands and along the matrix grain boundaries was observed. Stage D of both samples showed the formation of a thick, passivating oxygen containing, probably Mg(OH)(,2) film. In Stage E, this film was broken down by pits, which formed due to the presence of the chloride ions in both types of samples. Stages A through D of the unimplanted samples were not seen in the boron or iron

  12. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2006-01-01

    In 2005, seawater and natural brines accounted for 51% of US magnesium compounds production. World magnesia production was estimated to be 14.5 Mt. Most of the production came from China, North Korea, Russia and Turkey. Although no specific production figures are available, Japan and the United States are estimated to account for almost one-half of the world's capacity from seawater and brines.

  13. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2003-01-01

    Seawater and natural brines accounted for about 60 percent of U.S. magnesium compounds production during 2002. Dead-burned and caustic-calcined magnesias were recovered from seawater by Premier Chemicals in Florida. They were also recovered from well brines in Michigan by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And they were recovered from magnesite in Nevada by Premier Chemicals.

  14. Magnesium in diet

    MedlinePlus

    Diet - magnesium ... Magnesium is needed for more than 300 biochemical reactions in the body. It helps to maintain normal ... There is ongoing research into the role of magnesium in preventing and managing disorders such as high ...

  15. An electrolytic process for magnesium and its alloys production

    SciTech Connect

    Sharma, R.

    1996-10-01

    The largest amount of magnesium is used for aluminum-magnesium alloy production. The second largest use is in desulfurization of steel. A magnesium {minus}10 weight percent (w/o) aluminum alloy can also be used in both the above processes. Pure magnesium metal is not of much use for structural purposes. However, a magnesium {minus}10 w/o aluminum alloy melt which is also suitable for structural applications, can be produced as a bottom layer in an electrolytic magnesium production cell using a potassium chloride-magnesium chloride electrolyte at {approximately} 750 C. In this situation, the magnesium production process and the cell can be similar to the aluminum production process and its cell. The magnesium-aluminum alloys can be produced by electrolysis at far less cost than these alloys produced from the respective metals. The process can also be used to produce other magnesium alloys for use in the auto industry at comparatively far less cost. The largest increase in the magnesium usage in the future is going to be only in the magnesium alloys sector.

  16. A study on factors affecting the degradation of magnesium and a magnesium-yttrium alloy for biomedical applications.

    PubMed

    Johnson, Ian; Liu, Huinan

    2013-01-01

    Controlling degradation of magnesium or its alloys in physiological saline solutions is essential for their potential applications in clinically viable implants. Rapid degradation of magnesium-based materials reduces the mechanical properties of implants prematurely and severely increases alkalinity of the local environment. Therefore, the objective of this study is to investigate the effects of three interactive factors on magnesium degradation, specifically, the addition of yttrium to form a magnesium-yttrium alloy versus pure magnesium, the metallic versus oxide surfaces, and the presence versus absence of physiological salt ions in the immersion solution. In the immersion solution of phosphate buffered saline (PBS), the magnesium-yttrium alloy with metallic surface degraded the slowest, followed by pure magnesium with metallic or oxide surfaces, and the magnesium-yttrium alloy with oxide surface degraded the fastest. However, in deionized (DI) water, the degradation rate showed a different trend. Specifically, pure magnesium with metallic or oxide surfaces degraded the slowest, followed by the magnesium-yttrium alloy with oxide surface, and the magnesium-yttrium alloy with metallic surface degraded the fastest. Interestingly, only magnesium-yttrium alloy with metallic surface degraded slower in PBS than in DI water, while all the other samples degraded faster in PBS than in DI water. Clearly, the results showed that the alloy composition, presence or absence of surface oxide layer, and presence or absence of physiological salt ions in the immersion solution all influenced the degradation rate and mode. Moreover, these three factors showed statistically significant interactions. This study revealed the complex interrelationships among these factors and their respective contributions to degradation for the first time. The results of this study not only improved our understanding of magnesium degradation in physiological environment, but also presented the key

  17. Choline Magnesium Trisalicylate

    MedlinePlus

    Choline magnesium trisalicylate is used to relieve the pain, tenderness, inflammation (swelling), and stiffness caused by arthritis and painful ... used to relieve pain and lower fever. Choline magnesium trisalicylate is in a class of nonsteroidal anti- ...

  18. The Corrosion of Magnesium and of the Magnesium Aluminum Alloys Containing Manganese

    NASA Technical Reports Server (NTRS)

    Boyer, J A

    1927-01-01

    The extensive use of magnesium and its alloys in aircraft has been seriously handicapped by the uncertainties surrounding their resistance to corrosion. This problem has been given intense study by the American Magnesium Corporation and at the request of the Subcommittee on Materials for Aircraft of the National Advisory Committee for Aeronautics this report was prepared on the corrosion of magnesium. The tentative conclusions drawn from the experimental facts of this investigation are as follows: the overvoltage of pure magnesium is quite high. On immersion in salt water the metal corrodes with the liberation of hydrogen until the film of corrosion product lowers the potential to a critical value. When the potential reaches this value it no longer exceeds the theoretical hydrogen potential plus the overvoltage of the metal. Rapid corrosion consequently ceases. When aluminum is added, especially when in large amounts, the overvoltage is decreased and hydrogen plates out at a much lower potential than with pure magnesium. The addition of small amount of manganese raises the overvoltage back to practically that of pure metal, and the film is again negative.

  19. Magnesium and Space Flight

    PubMed Central

    Smith, Scott M.; Zwart, Sara R.

    2015-01-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD) before, during, and after 4–6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female), 35 ± 7 years old). We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4–6-month space missions. PMID:26670248

  20. Magnesium and Space Flight

    NASA Technical Reports Server (NTRS)

    Smith, Scott M.; Zwart, Sara R.

    2016-01-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in astronauts before, during, and after space missions, in 43 astronauts (34 male, 9 female) on 4-6 month space flight missions. We also studied individuals participating in a ground analog of space flight, (head-down tilt bed rest, n=27, 35 +/- 7 y). We evaluated serum concentration and 24-hour urinary excretion of magnesium along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-d space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4- to 6-month space missions.

  1. Magnesium and Space Flight.

    PubMed

    Smith, Scott M; Zwart, Sara R

    2015-12-08

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD) before, during, and after 4-6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female), 35 ± 7 years old). We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4-6-month space missions.

  2. Magnesium and Space Flight.

    PubMed

    Smith, Scott M; Zwart, Sara R

    2015-12-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD) before, during, and after 4-6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female), 35 ± 7 years old). We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4-6-month space missions. PMID:26670248

  3. Magnesium industry overview

    SciTech Connect

    Clow, B.B.

    1996-10-01

    Magnesium products provide an excellent strength-to-weight ratio, good fatigue strength, high impact strength, good corrosion resistance, high-speed machinability, and good thermal and electrical conductivities. As a result, applications are expanding in almost every industry. Dozens of automotive components are now made of magnesium, including steering wheels, valve covers, and seat frames. Magnesium alloys are also used in computer housings, in-line roller skates, golf clubs, tennis racquets, and baseball bats. Good strength and stiffness at both room and elevated temperatures make magnesium alloys especially valuable for aerospace applications. This article presents an overview of magnesium technology, world production, increasing demand, and recycling.

  4. Recycling of Magnesium Alloy Employing Refining and Solid Oxide Membrane (SOM) Electrolysis

    NASA Astrophysics Data System (ADS)

    Guan, Xiaofei; Zink, Peter A.; Pal, Uday B.; Powell, Adam C.

    2013-04-01

    Pure magnesium was recycled from partially oxidized 50.5 wt pct Mg-Al scrap alloy and AZ91 Mg alloy (9 wt pct Al, 1 wt pct Zn). Refining experiments were performed using a eutectic mixture of MgF2-CaF2 molten salt (flux). During the experiments, potentiodynamic scans were performed to determine the electrorefining potentials for magnesium dissolution and magnesium bubble nucleation in the flux. The measured electrorefining potential for magnesium bubble nucleation increased over time as the magnesium content inside the magnesium alloy decreased. Potentiostatic holds and electrochemical impedance spectroscopy were employed to measure the electronic and ionic resistances of the flux. The electronic resistivity of the flux varied inversely with the magnesium solubility. Up to 100 pct of the magnesium was refined from the Mg-Al scrap alloy by dissolving magnesium and its oxide into the flux followed by argon-assisted evaporation of dissolved magnesium and subsequently condensing the magnesium vapor. Solid oxide membrane electrolysis was also employed in the system to enable additional magnesium recovery from magnesium oxide in the partially oxidized Mg-Al scrap. In an experiment employing AZ91 Mg alloy, only the refining step was carried out. The calculated refining yield of magnesium from the AZ91 alloy was near 100 pct.

  5. Magnesium and the Athlete.

    PubMed

    Volpe, Stella Lucia

    2015-01-01

    Magnesium is the fourth most abundant mineral and the second most abundant intracellular divalent cation in the body. It is a required mineral that is involved in more than 300 metabolic reactions in the body. Magnesium helps maintain normal nerve and muscle function, heart rhythm (cardiac excitability), vasomotor tone, blood pressure, immune system, bone integrity, and blood glucose levels and promotes calcium absorption. Because of magnesium's role in energy production and storage, normal muscle function, and maintenance of blood glucose levels, it has been studied as an ergogenic aid for athletes. This article will cover the general roles of magnesium, magnesium requirements, and assessment of magnesium status as well as the dietary intake of magnesium and its effects on exercise performance. The research articles cited were limited from those published in 2003 through 2014. PMID:26166051

  6. Magnesium and the Athlete.

    PubMed

    Volpe, Stella Lucia

    2015-01-01

    Magnesium is the fourth most abundant mineral and the second most abundant intracellular divalent cation in the body. It is a required mineral that is involved in more than 300 metabolic reactions in the body. Magnesium helps maintain normal nerve and muscle function, heart rhythm (cardiac excitability), vasomotor tone, blood pressure, immune system, bone integrity, and blood glucose levels and promotes calcium absorption. Because of magnesium's role in energy production and storage, normal muscle function, and maintenance of blood glucose levels, it has been studied as an ergogenic aid for athletes. This article will cover the general roles of magnesium, magnesium requirements, and assessment of magnesium status as well as the dietary intake of magnesium and its effects on exercise performance. The research articles cited were limited from those published in 2003 through 2014.

  7. Solubility of magnesium carbonate in natural waters

    USGS Publications Warehouse

    Wells, R.C.

    1915-01-01

    (1) Under atmospheric conditions it appears possible to attain practically the same state in a solution saturated with MgCO33H2O, whether one starts with a solution containing an excess of magnesium bicarbonate or with the pure trihydrate and water, but the adjustment occurs very slowly. The solution finally contains 0.36 g. magnesium and 1.01 g. carbon dioxide per liter at 20??. (2) The solubility found for magnesite, however, is much smaller, viz., 0.02 g. magnesium and 0.07 g. carbon dioxide per liter. (3) Certain natural waters, freely exposed to the atmosphere, appear to be supersaturated with respect to magnesite but none approaches very closely to the point of saturation of the trihydrate MgCO3.3H2O.

  8. In vivo decomposition study of coated magnesium alloys

    NASA Astrophysics Data System (ADS)

    White, Desiree; Piersma, Tyler; Lecronier, David; Cheng, Xingguo; Rabago-Smith, Montserrat

    2010-04-01

    In the last decade, magnesium has resurged as an important biomaterial. Its mechanical properties are very similar to natural bone, and it degrades in vivo to non toxic substances. Unfortunately, corrosion of pure magnesium in vivo is rapid, thus coated alloys that decrease its corrosion could be used as implants in orthopedics. This presentation will describe the degradation results in cell cultures and in rats.

  9. In vitro decomposition study of coated magnesium alloys

    NASA Astrophysics Data System (ADS)

    Piersma, Tyler; White, Desiree; Cheng, Xinggou; Rabago-Smith, Montserrat; Lecronier, David

    2010-04-01

    In the last decade, magnesium has resurged as an important biomaterial. It's mechanical properties are very similar to natural bone, and it degrades in vivo to non toxic substances. Unfortunately, corrosion of pure magnesium in vivo is rapid, thus coated alloys that decrease it's corrosion could be used as implants in orthopedics. This presentation will describe the degradation results in a simulated body fluid (SBF).

  10. [Magnesium and exercise].

    PubMed

    Bielinski, R W

    2006-07-26

    The determination of the magnesium status is difficult, since a cheep, sensitive and usable test remains to be found. Serum magnesium only signals severe deficiencies, which are in athletes. Blood cell magnesium may detect a subclinical deficiency, the significance of which is however very controversial. The "magnesium loading test" is the standard method, but it is too complex for the practice. A mixed diet with sufficient energy covers the needs of athletes of all levels. When the plasma magnesium levels are in normal range, supplements offer no significant benefits in terms of performance. The usefulness of magnesium in the treatment of exercise related muscle cramps is most probably widely exaggerated. Various other electrolyte dysbalances as well as venous insufficiency are certainly more important factors.

  11. Structural studies of magnesium doped hydroxyapatite coatings after osteoblast culture

    NASA Astrophysics Data System (ADS)

    Mróz, W.; Bombalska, A.; Burdyńska, S.; Jedyński, M.; Prokopiuk, A.; Budner, B.; Ślósarczyk, A.; Zima, A.; Menaszek, E.; Ścisłowska-Czarnecka, A.; Niedzielski, K.

    2010-08-01

    Hydroxyapatite and magnesium modified hydroxyapatite were deposited on nitrited Ti6Al4V substrates by use of pulsed laser deposition technique. Three target materials consisting of non-modified and magnesium modified hydroxyapatite with Mg content of 0.6 wt.% and 1.8 wt.% were ablated using an ArF excimer laser. The obtained coatings were analyzed using X-ray diffraction, FTIR and AFM methods in order to determine the influence of magnesium on their phase and chemical composition, crystallinity, surface morphology and biological properties. Doping with low concentration of Mg does not significantly influence the HA morphology but improves osteoblast adhesion as compared to pure HA.

  12. Magnesium in pregnancy.

    PubMed

    Dalton, Lynne M; Ní Fhloinn, Deirdre M; Gaydadzhieva, Gergana T; Mazurkiewicz, Ola M; Leeson, Heather; Wright, Ciara P

    2016-09-01

    Magnesium deficiency is prevalent in women of childbearing age in both developing and developed countries. The need for magnesium increases during pregnancy, and the majority of pregnant women likely do not meet this increased need. Magnesium deficiency or insufficiency during pregnancy may pose a health risk for both the mother and the newborn, with implications that may extend into adulthood of the offspring. The measurement of serum magnesium is the most widely used method for determining magnesium levels, but it has significant limitations that have both hindered the assessment of deficiency and affected the reliability of studies in pregnant women. Thus far, limited studies have suggested links between magnesium inadequacy and certain conditions in pregnancy associated with high mortality and morbidity, such as gestational diabetes, preterm labor, preeclampsia, and small for gestational age or intrauterine growth restriction. This review provides recommendations for further study and improved testing using measurement of red cell magnesium. Pregnant women should be counseled to increase their intake of magnesium-rich foods such as nuts, seeds, beans, and leafy greens and/or to supplement with magnesium at a safe level. PMID:27445320

  13. [Magnesium in skin allergy].

    PubMed

    Błach, Joanna; Nowacki, Wojciech; Mazur, Andrzej

    2007-10-08

    Magnesium is involved in many biological processes within the body. Magnesium deficiency causes many disorders, including impairment of immunity. This review summarizes present knowledge on the relationship between magnesium and skin allergy reactions. Special focus is on allergy types I and IV. At present the best knowledge is on allergy I. Magnesium deficiency in experimental animals, mainly rats, leads to characteristic hyperemia, an increase in IgE, neutrophilia and eosinophilia, an increase in the level of proinflammatory cytokines, mastocyte degranulation, histaminemia, and splenomegaly. These symptoms observed in hypomagnesemic rats are similar to those in atopic patients. Data on the relationship between magnesium and other types of allergy are scarce. Clinical observations show the beneficial effect of topical and oral administration of magnesium salts in patients with skin allergy. All the presented data point to an important role of magnesium in allergy reactions. Other studies are needed to better understand the mechanism of magnesium's action. Well-controlled clinical protocols should also be conducted to assess the efficiency of magnesium supplementation in patients with skin allergy.

  14. Magnesium in pregnancy.

    PubMed

    Dalton, Lynne M; Ní Fhloinn, Deirdre M; Gaydadzhieva, Gergana T; Mazurkiewicz, Ola M; Leeson, Heather; Wright, Ciara P

    2016-09-01

    Magnesium deficiency is prevalent in women of childbearing age in both developing and developed countries. The need for magnesium increases during pregnancy, and the majority of pregnant women likely do not meet this increased need. Magnesium deficiency or insufficiency during pregnancy may pose a health risk for both the mother and the newborn, with implications that may extend into adulthood of the offspring. The measurement of serum magnesium is the most widely used method for determining magnesium levels, but it has significant limitations that have both hindered the assessment of deficiency and affected the reliability of studies in pregnant women. Thus far, limited studies have suggested links between magnesium inadequacy and certain conditions in pregnancy associated with high mortality and morbidity, such as gestational diabetes, preterm labor, preeclampsia, and small for gestational age or intrauterine growth restriction. This review provides recommendations for further study and improved testing using measurement of red cell magnesium. Pregnant women should be counseled to increase their intake of magnesium-rich foods such as nuts, seeds, beans, and leafy greens and/or to supplement with magnesium at a safe level.

  15. 75 FR 56989 - Magnesium Metal From the Russian Federation: Final Results of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... Duty Administrative Review, 75 FR 26922 (May 13, 2010) (Preliminary Results). We invited interested... Magnesium in Granular Form From the People's Republic of China, 66 FR 49345 (September 27, 2001), Notice of Final Determination of Sales at Less Than Fair Value: Pure Magnesium From Israel, 66 FR 49349...

  16. Borosilicate glass alteration driven by magnesium carbonates

    NASA Astrophysics Data System (ADS)

    Debure, M.; Frugier, P.; De Windt, L.; Gin, S.

    2012-01-01

    The alteration of simplified synthetic glass, representative of the French reference nuclear glass R7T7, in presence of hydromagnesite has been experimentally investigated and modeled. Magnesium in solution is known to potentially enhance glass alteration; nuclear glass clayed host rocks contain magnesium and can dissolve to maintain the concentration of magnesium in solution. For modeling purposes, it was suitable to study a simple system. Hydromagnesite was therefore chosen as a simple model mineral in order to check the influence of an Mg-rich mineral on glass alteration. Since the models use thermodynamic and kinetic parameters measured in pure water and pH-buffered solutions, changing the solution composition or adding minerals is a key step towards the validation of the modeling assumptions before using the model for predictive purposes. Experiments revealed that glass alteration is enhanced in presence of hydromagnesite. Modeling was performed using the GRAAL model implemented within the CHESS/HYTEC reactive transport code. Modeling proved useful both for explaining the mechanisms involved and quantifying the impact on glass alteration: Mg coming from hydromagnesite dissolution reacts with Si provided by the glass in order to form magnesium silicates. This reaction decreases the pH down to neutral conditions where magnesium silicates are more soluble than at the natural alkali pH imposed by glass or hydromagnesite dissolution. The driving force of the magnesium silicate precipitation is eventually the interdiffusion of alkali within the altered amorphous glass layer as this mechanism consumes protons. The model's ability to describe the concentrations of elements in solution and formed solids whatever the glass/hydromagnesite ratio strongly supports the basic modeling hypothesis.

  17. Torsional and axial damping properties of the AZ31B-F magnesium alloy

    NASA Astrophysics Data System (ADS)

    Anes, V.; Lage, Y. E.; Vieira, M.; Maia, N. M. M.; Freitas, M.; Reis, L.

    2016-10-01

    Damping properties for the AZ31B-F magnesium alloy were evaluated for pure axial and pure shear loading conditions at room temperature. Hysteretic damping results were measured through stress-strain controlled tests. Moreover, the magnesium alloy viscous damping was measured with frequency response functions and free vibration decay, both results were obtained by experiments. The axial and shear damping ratio (ASDR) has been identified and described, specifically for free vibration conditions.

  18. Magnesium deficiency: what's our status?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Low magnesium intake has been implicated in a broad range of cardiometabolic conditions, including diabetes, hypertension, and cardiovascular disease. Dietary magnesium and total body magnesium status have a widely-used but imperfect biomarker in serum magnesium. Despite serum magnesium’s limitation...

  19. Method for production of magnesium

    DOEpatents

    Diaz, A.F.; Howard, J.B.; Modestino, A.J.; Peters, W.A.

    1998-07-21

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400 C or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products. 12 figs.

  20. Method for production of magnesium

    DOEpatents

    Diaz, Alexander F.; Howard, Jack B.; Modestino, Anthony J.; Peters, William A.

    1998-01-01

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400.degree. C. or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products.

  1. Magnesium battery disposal characteristics

    NASA Astrophysics Data System (ADS)

    Soffer, Louis; Atwater, Terrill

    1994-12-01

    This study assesses the disposal characteristics of U.S. Army procured military magnesium batteries under current Resource Conservation and Recovery Act (RCRA) hazardous waste identification regulations administered by the U.S. Environmental Protection Agency. Magnesium batteries were tested at 100, 50, 10 and 0 percent remaining state of charge. Present findings indicate that magnesium batteries with less than 50 percent remaining charge do not exceed the federal regulatory limit of 5.0 mg/L for chromium. All other RCRA contaminates were below regulatory limits at all levels of remaining charge. Assay methods, findings, disposal requirements and design implications are discussed.

  2. Twisted partially pure spinors

    NASA Astrophysics Data System (ADS)

    Herrera, Rafael; Tellez, Ivan

    2016-08-01

    Motivated by the relationship between orthogonal complex structures and pure spinors, we define twisted partially pure spinors in order to characterize spinorially subspaces of Euclidean space endowed with a complex structure.

  3. Magnesium blood test

    MedlinePlus

    Magnesium - blood ... A blood sample is needed. ... When the needle is inserted to draw blood, some people feel slight pain. Others feel a prick or stinging. Afterward, there may be some throbbing or a slight bruise. This soon ...

  4. Magnesium for automotive applications

    SciTech Connect

    VanFleteren, R.

    1996-05-01

    Die cast magnesium parts are rapidly replacing steel and aluminum structural components in automotive applications, as design engineers seek to reduce assembly costs, raise fuel efficiency, and improve safety. Dozens of automotive components are now die cast from magnesium alloys, including seat stanchions, valve covers, steering wheels, and a variety of steering column components. Because of their excellent castability, complex magnesium die castings can sometimes consolidate several components and eliminate assembly steps. Highly ductile magnesium alloys such as AM60B (6% aluminum) and AM50A (5% aluminum) are important in helping to meet automotive industry crash-energy requirements for car seating and steering components. AZ91D (9% aluminum, 1% zinc) alloys are making removable rear seats in new minivans much easier to handle.

  5. Interstellar magnesium abundances

    NASA Technical Reports Server (NTRS)

    Murray, M. J.; Dufton, P. L.; Hibbert, A.; York, D. G.

    1984-01-01

    An improved evaluation of the Mg II 1240 A doublet oscillator strength is used in conjunction with recently published Copernicus observations to derive accurate Mg II column densities toward 74 stars. These imply an average of 40 percent of interstellar magnesium is in the gaseous phase. Magnesium depletion is examined as a function of various interstellar extinction and density parameters, and the results are briefly discussed in terms of current depletion theories.

  6. Rechargeable Magnesium Power Cells

    NASA Technical Reports Server (NTRS)

    Koch, Victor R.; Nanjundiah, Chenniah; Orsini, Michael

    1995-01-01

    Rechargeable power cells based on magnesium anodes developed as safer alternatives to high-energy-density cells like those based on lithium and sodium anodes. At cost of some reduction in energy density, magnesium-based cells safer because less susceptible to catastrophic meltdown followed by flames and venting of toxic fumes. Other advantages include ease of handling, machining, and disposal, and relatively low cost.

  7. Novel process for recycling magnesium alloy employing refining and solid oxide membrane electrolysis

    NASA Astrophysics Data System (ADS)

    Guan, Xiaofei

    Magnesium is the least dense engineering metal, with an excellent stiffness-to-weight ratio. Magnesium recycling is important for both economic and environmental reasons. This project demonstrates feasibility of a new environmentally friendly process for recycling partially oxidized magnesium scrap to produce very pure magnesium at low cost. It combines refining and solid oxide membrane (SOM) based oxide electrolysis in the same reactor. Magnesium and its oxide are dissolved in a molten flux. This is followed by argon-assisted evaporation of dissolved magnesium, which is subsequently condensed in a separate condenser. The molten flux acts as a selective medium for magnesium dissolution, but not aluminum or iron, and therefore the magnesium collected has high purity. Potentiodynamic scans are performed to monitor the magnesium content change in the scrap as well as in solution in the flux. The SOM electrolysis is employed in the refining system to enable electrolysis of the magnesium oxide dissolved in the flux from the partially oxidized scrap. During the SOM electrolysis, oxygen anions are transported out of the flux through a yttria stabilized zirconia membrane to a liquid silver anode where they are oxidized. Simultaneously, magnesium cations are transported through the flux to a steel cathode where they are reduced. The combination of refining and SOM electrolysis yields close to 100% removal of magnesium metal from partially oxidized magnesium scrap. The magnesium recovered has a purity of 99.6w%. To produce pure oxygen it is critical to develop an inert anode current collector for use with the non-consumable liquid silver anode. In this work, an innovative inert anode current collector is successfully developed and used in SOM electrolysis experiments. The current collector employs a sintered strontium-doped lanthanum manganite (La0.8Sr0.2MnO 3-delta or LSM) bar, an Inconel alloy 601 rod, and a liquid silver contact in between. SOM electrolysis experiments

  8. Absorption of magnesium from orally administered magnesium sulfate in man.

    PubMed

    Morris, M E; LeRoy, S; Sutton, S C

    1987-01-01

    The use of magnesium sulfate (Epsom salt) as a cathartic in patients with impaired renal function can lead to severe toxicity due to hypermagnesemia. Although toxicity is uncommon in healthy subjects, little is known concerning the extent of absorption of magnesium after a cathartic dose of magnesium sulfate. The bioavailability of magnesium following a large oral dose of magnesium sulfate in normal volunteers was examined in the present investigation. Baseline 24-hour urinary excretion rates of magnesium and creatinine were determined over 3 consecutive days in 6 healthy men. The oral administration of 13.9 g (56.5 mmoles) magnesium sulfate U.S.P., in 4 equal hourly increments, resulted in the urinary excretion (corrected for baseline excretion rate) of 4.0 +/- 2.9% (mean +/- SD) of the dose of magnesium during the first 24 hours and 6.9 +/- 7.0% of the dose during a 72-hour interval. Magnesium sulfate administration had no effect on the 24-hour urinary excretion rate of creatinine. The baseline excretion rate of magnesium was significantly correlated with that of creatinine (r = 0.875) and inorganic sulfate (r = 0.921). All of the subjects experienced mild or moderate diarrhea. Therefore, magnesium is absorbed to a limited and variable extent in healthy adults following a cathartic dose of magnesium sulfate. PMID:3430654

  9. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium phosphate. 184.1434 Section 184.1434... Listing of Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate,...

  10. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium phosphate. 184.1434 Section 184.1434... Listing of Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate,...

  11. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium phosphate. 184.1434 Section 184.1434... Listing of Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate,...

  12. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium phosphate. 184.1434 Section 184.1434... GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate, dibasic (MgHPO4·3H2O, CAS Reg. No....

  13. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium phosphate. 184.1434 Section 184.1434 Food... Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate, dibasic...

  14. Aluminum Hydroxide and Magnesium Hydroxide

    MedlinePlus

    Aluminum Hydroxide, Magnesium Hydroxide are antacids used together to relieve heartburn, acid indigestion, and upset stomach. They ... They combine with stomach acid and neutralize it. Aluminum Hydroxide, Magnesium Hydroxide are available without a prescription. ...

  15. Calcium carbonate with magnesium overdose

    MedlinePlus

    The combination of calcium carbonate and magnesium is commonly found in antacids. These medicines provide heartburn relief. Calcium carbonate with magnesium overdose occurs when someone takes more than the ...

  16. X-ray photoelectron spectroscopy (XPS) investigation of the surface film on magnesium powders.

    PubMed

    Burke, Paul J; Bayindir, Zeynel; Kipouros, Georges J

    2012-05-01

    Magnesium (Mg) and its alloys are attractive for use in automotive and aerospace applications because of their low density and good mechanical properties. However, difficulty in forming magnesium and the limited number of available commercial alloys limit their use. Powder metallurgy may be a suitable solution for forming near-net-shape parts. However, sintering pure magnesium presents difficulties due to surface film that forms on the magnesium powder particles. The present work investigates the composition of the surface film that forms on the surface of pure magnesium powders exposed to atmospheric conditions and on pure magnesium powders after compaction under uniaxial pressing at a pressure of 500 MPa and sintering under argon at 600 °C for 40 minutes. Initially, focused ion beam microscopy was utilized to determine the thickness of the surface layer of the magnesium powder and found it to be ~10 nm. The X-ray photoelectron analysis of the green magnesium sample prior to sintering confirmed the presence of MgO, MgCO(3)·3H(2)O, and Mg(OH)(2) in the surface layer of the powder with a core of pure magnesium. The outer portion of the surface layer was found to contain MgCO(3)·3H(2)O and Mg(OH)(2), while the inner portion of the layer is primarily MgO. After sintering, the MgCO(3)·3H(2)O was found to be almost completely absent, and the amount of Mg(OH)(2) was also decreased significantly. This is postulated to occur by decomposition of the compounds to MgO and gases during the high temperature of sintering. An increase in the MgO content after sintering supports this theory.

  17. Magnesium Research and Technology Development

    SciTech Connect

    Nyberg, Eric A.; Joost, William; Smith, Mark T.

    2009-12-30

    The Magnesium Research and Technical Development (MR&TD) project supports efforts to increase using magnesium in automotive applications, including improving technology, lowering costs and increasing the knowledge needed to enable alloy and manufacturing process optimization. MR&TD supports the U.S. Department of Energy (DOE)/United States Automotive Materials Partnership (USAMP) Magnesium Front End Research and Development (MFERD) project in collaboration with China and Canada. The MR&TD projects also maintains the magnesium bibliographic database at magnesium.pnl.gov.

  18. Purely lytic osteosarcoma

    SciTech Connect

    De Santos, L.A.; Eideken, B.

    1982-11-01

    The radiographic features of 42 purely lytic osteosarcomas are presented. Purely lytic osteosarcoma is identified as a lytic lesion of bone with no demonstrable osteoid matrix by conventional radiographic modalities. Purely lytic osteosarcoma represented 13.7% of a group of 305 osteosarcomas. The most common presentation was that of a lytic illdefined lesion with a moderate to large extraosseous mass component. Nine lesions presented with benign radiographic features. The differential diagnosis is outlined. The need for awareness of this type of presentation of osteosarcoma is stressed.

  19. Pure-quartic solitons

    PubMed Central

    Blanco-Redondo, Andrea; Martijn, de Sterke C.; Sipe, J.E.; Krauss, Thomas F.; Eggleton, Benjamin J.; Husko, Chad

    2016-01-01

    Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we experimentally demonstrate a class of bright soliton arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. We derive the approximate shape of the fundamental pure-quartic soliton and discover that is surprisingly Gaussian, exhibiting excellent agreement with our experimental observations. Our discovery, enabled by precise dispersion engineering, could find applications in communications, frequency combs and ultrafast lasers. PMID:26822758

  20. Pure-quartic solitons.

    PubMed

    Blanco-Redondo, Andrea; de Sterke, C Martijn; Martijn, de Sterke C; Sipe, J E; Krauss, Thomas F; Eggleton, Benjamin J; Husko, Chad

    2016-01-01

    Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we experimentally demonstrate a class of bright soliton arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. We derive the approximate shape of the fundamental pure-quartic soliton and discover that is surprisingly Gaussian, exhibiting excellent agreement with our experimental observations. Our discovery, enabled by precise dispersion engineering, could find applications in communications, frequency combs and ultrafast lasers. PMID:26822758

  1. Grosnaja ABCs: Magnesium isotope compositions

    NASA Technical Reports Server (NTRS)

    Goswami, J. N.; Srinivasan, G.; Ulyanov, A. A.

    1993-01-01

    Three CAI's from the Grosnaja CV3 chondrite were analyzed for their magnesium isotopic compositions by the ion microprobe. The selected CAI's represent three distinct types: GR4(compact Type A), GR7(Type B) and GR2(Type C). Petrographic studies indicate that all three Grosnaja inclusions were subjected to secondary alterations. The Type A CAI GR4 is primarily composed of melilite with spinel and pyroxene occurring as minor phases. The rim of the inclusion does not exhibit distinct layered structure and secondary alteration products (garnet, Fe-rich olivine and Na-rich plagioclase) are present in some localized areas near the rim region. The average major element compositions of different mineral phases in GR4 are given. Preliminary REE data suggest a depletion of HREE relative to LREE by about a factor of 3 without any clear indication of interelement fractionation. The CAI GR7 has textural and minerological characteristics similar to Type B inclusions. The REE data show a pattern that is similar to Group 6 with enrichment in Eu and Yb. In addition, a depletion of HREE compared to LREE is also evident in this object. Melilite composition shows a broad range of akermanite content (Ak(sub 15-55)). Detailed petrographic study is in progress. GR2 is a anorthite-rich Type C inclusion with large plagioclase laths intergrown with Ti-rich pyroxene. The average plagioclase composition is close to pure anorthite (An99).

  2. Geomorphology: Pure and applied

    SciTech Connect

    Hart, M.G.

    1986-01-01

    The book summarizes the history of intellectual debate in geomorphology and describes modern developments both ''pure'' and ''applied.'' The history begins well before W.M. Davis and follows through to such debates as those concerned with the Pleistocene. Modern developments in pure geomorphology are cast in terms of chapters on form, process, materials, and methods analysis. The applied chapters concentrate on environmental hazards and resources, and their management.

  3. Production, structure, texture, and mechanical properties of severely deformed magnesium

    NASA Astrophysics Data System (ADS)

    Volkov, A. Yu.; Antonova, O. V.; Kamenetskii, B. I.; Klyukin, I. V.; Komkova, D. A.; Antonov, B. D.

    2016-05-01

    Methods of the severe plastic deformation (SPD) of pure magnesium at room temperature, namely, transverse extrusion and hydroextrusion in a self-destroyed shell, have been developed. The maximum true strain of the samples after the hydroextrusion was e ~ 3.2; in the course of transverse extrusion and subsequent cold rolling, a true strain of e ~ 6.0 was achieved. The structure and mechanical properties of the magnesium samples have been studied in different structural states. It has been shown that the SPD led to a decrease in the grain size d to ~2 μm; the relative elongation at fracture δ increased to ~20%. No active twinning has been revealed. The reasons for the high plasticity of magnesium after SPD according to the deformation modes suggested are discussed from the viewpoint of the hierarchy of the observed structural states.

  4. Nondestructive spot test method for magnesium and magnesium alloys

    NASA Technical Reports Server (NTRS)

    Wilson, M. L. (Inventor)

    1973-01-01

    A method for spot test identification of magnesium and various magnesium alloys commonly used in aerospace applications is described. The spot test identification involves color codes obtained when several drops of 3 M hydrochloric acid are placed on the surface to be tested. After approximately thirty seconds, two drops of this reacted acid is transferred to each of two depressions in a spot plate for additions of other chemicals with subsequent color changes indicating magnesium or its alloy.

  5. Highly Soluble Alkoxide Magnesium Salts for Rechargeable Magnesium Batteries

    SciTech Connect

    Liao, Chen; Guo, Bingkun; Jiang, Deen; Custelcean, Radu; Mahurin, Shannon Mark; Sun, Xiao-Guang; Dai, Sheng

    2014-01-01

    A unique class of air-stable and non-pyrophoric magnesium electrolytes has been developed based on alkoxide magnesium compounds. The crystals obtained from this class of electrolytes exhibit a unique structure of tri-magnesium cluster, [Mg3Cl3(OR)2(THF)6]+ [(THF)MgCl3] . High reversible capacities and good rate capabilities were obtained in Mg-Mo6S8 batteries using these new electrolytes at both 20 and 50 oC.

  6. Magnesium fluoride recovery method

    DOEpatents

    Gay, Richard L.; McKenzie, Donald E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is contacted with an acid under certain prescribed conditions to produce a liquid product and a particulate solid product. The particulate solid product is separated from the liquid and treated at least two more times with acid to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 pCi/gm. In accordance with a particularly preferred embodiment of the invention a catalyst and an oxidizing agent are used during the acid treatment and preferably the acid is sulfuric acid having a strength of about 1.0 Normal.

  7. [Magnesium and pregnancy].

    PubMed

    Yamasaki, Mineo

    2012-08-01

    Blood levels of total Mg, ionized Mg and intracellular ionized Mg of platelet were lowered in the 2nd trimester of gestation and thereafter. Urinary excretion of Mg does not change during the whole period of pregnancy. According to our results of animal experiments, intestinal absorption of Mg does not increase during pregnancy compared with non-pregnant state. These data suggest pregnant women tend to become magnesium deficiency. This is reflected in the fact that Mg metabolic parameters of pregnant women with preeclampsia are relatively reduced compared with those of healthy gravidae. In the obstetrical practice Mg has other significance, because magnesium sulfate is frequently used as a drug of choice in the therapy of threatened premature delivery and eclampsia. Mg plays important roles in physiology and pharmacology during gestation. PMID:22846356

  8. Constraining magnesium cycling in marine sediments using magnesium isotopes

    NASA Astrophysics Data System (ADS)

    Higgins, J. A.; Schrag, D. P.

    2010-09-01

    Magnesium concentrations in deep-sea sediment pore-fluids typically decrease down core due to net precipitation of dolomite or clay minerals in the sediments or underlying crust. To better characterize and differentiate these processes, we have measured magnesium isotopes in pore-fluids and sediment samples from Ocean Drilling Program sites (1082, 1086, 1012, 984, 1219, and 925) that span a range of oceanographic settings. At all sites, magnesium concentrations decrease with depth. At sites where diagenetic reactions are dominated by the respiration of organic carbon, pore-fluid δ 26Mg values increase with depth by as much as 2‰. Because carbonates preferentially incorporate 24Mg (low δ 26Mg), the increase in pore-fluid δ 26Mg values at these sites is consistent with the removal of magnesium in Mg-carbonate (dolomite). In contrast, at sites where the respiration of organic carbon is not important and/or weatherable minerals are abundant, pore-fluid δ 26Mg values decrease with depth by up to 2‰. The decline in pore-fluid δ 26Mg at these sites is consistent with a magnesium sink that is isotopically enriched relative to the pore-fluid. The identity of this enriched magnesium sink is likely clay minerals. Using a simple 1D diffusion-advection-reaction model of pore-fluid magnesium, we estimate rates of net magnesium uptake/removal and associated net magnesium isotope fractionation factors for sources and sinks at all sites. Independent estimates of magnesium isotope fractionation during dolomite precipitation from measured δ 26Mg values of dolomite samples from sites 1082 and 1012 are very similar to modeled net fractionation factors at these sites, suggesting that local exchange of magnesium between sediment and pore-fluid at these sites can be neglected. Our results indicate that the magnesium incorporated in dolomite is 2.0-2.7‰ depleted in δ 26Mg relative to the precipitating fluid. Assuming local exchange of magnesium is minor at the rest of the

  9. Magnesium in Prevention and Therapy.

    PubMed

    Gröber, Uwe; Schmidt, Joachim; Kisters, Klaus

    2015-09-23

    Magnesium is the fourth most abundant mineral in the body. It has been recognized as a cofactor for more than 300 enzymatic reactions, where it is crucial for adenosine triphosphate (ATP) metabolism. Magnesium is required for DNA and RNA synthesis, reproduction, and protein synthesis. Moreover, magnesium is essential for the regulation of muscular contraction, blood pressure, insulin metabolism, cardiac excitability, vasomotor tone, nerve transmission and neuromuscular conduction. Imbalances in magnesium status-primarily hypomagnesemia as it is seen more common than hypermagnesemia-might result in unwanted neuromuscular, cardiac or nervous disorders. Based on magnesium's many functions within the human body, it plays an important role in prevention and treatment of many diseases. Low levels of magnesium have been associated with a number of chronic diseases, such as Alzheimer's disease, insulin resistance and type-2 diabetes mellitus, hypertension, cardiovascular disease (e.g., stroke), migraine headaches, and attention deficit hyperactivity disorder (ADHD).

  10. Pure shift NMR.

    PubMed

    Zangger, Klaus

    2015-04-01

    Although scalar-coupling provides important structural information, the resulting signal splittings significantly reduce the resolution of NMR spectra. Limited resolution is a particular problem in proton NMR experiments, resulting in part from the limited proton chemical shift range (∼10 ppm) but even more from the splittings due to scalar coupling to nearby protons. "Pure shift" NMR spectroscopy (also known as broadband homonuclear decoupling) has been developed for disentangling overlapped proton NMR spectra. The resulting spectra are considerably simplified as they consist of single lines, reminiscent of proton-decoupled C-13 spectra at natural abundance, with no multiplet structure. The different approaches to obtaining pure shift spectra are reviewed here and several applications presented. Pure shift spectra are especially useful for highly overlapped proton spectra, as found for example in reaction mixtures, natural products and biomacromolecules.

  11. Low brain magnesium in migraine

    SciTech Connect

    Ramadan, N.M.; Halvorson, H.; Vande-Linde, A.; Levine, S.R.; Helpern, J.A.; Welch, K.M.

    1989-10-01

    Brain magnesium was measured in migraine patients and control subjects using in vivo 31-Phosphorus Nuclear Magnetic Resonance Spectroscopy. pMg and pH were calculated from the chemical shifts between Pi, PCr and ATP signals. Magnesium levels were low during a migraine attack without changes in pH. We hypothesize that low brain magnesium is an important factor in the mechanism of the migraine attack.

  12. Mineral of the month: magnesium

    USGS Publications Warehouse

    Kramer, Deborah A.

    2005-01-01

    Magnesium, often confused with last month’s mineral of the month manganese, is valued primarily because of its light weight and high strength-to-weight ratio. Magnesium is the eighth most abundant element and constitutes about 2 percent of the Earth’s crust. It is the third most plentiful element dissolved in seawater, with a concentration averaging 0.13 percent. Magnesium is found in over 60 minerals, and also is recovered from seawater, wells, and lake brines and bitterns.

  13. Magnesium metabolism: a brief review.

    PubMed Central

    Paymaster, N. J.

    1976-01-01

    The important role played by the magnesium ion in the body is not generally recognized. The action of numerous enzyme systems critical to cellular metabolism is regulated by it and it contributes importantly to macromolecular structure. Magnesium defiency occurs more often than is generally suspected; magnesium excess, though uncommon, is of special interest to the anaesthetist because it produces a curare-like effect on neuromuscular transmission. It is hoped that this brief review of magnesium metabolism will draw attention to its importance and relevance in everyday practice. PMID:942168

  14. Production of pure metals

    NASA Technical Reports Server (NTRS)

    Philipp, W. H.; Marsik, S. J.; May, C. E. (Inventor)

    1974-01-01

    A process for depositing elements by irradiating liquids is reported. Ultra pure elements are precipitated from aqueous solutions or suspensions of compounds. A solution of a salt of a metal to be prepared is irradiated, and the insoluble reaction product settles out. Some chemical compounds may also be prepared in this manner.

  15. Dahlbeck and Pure Ontology

    ERIC Educational Resources Information Center

    Mackenzie, Jim

    2016-01-01

    This article responds to Johan Dahlbeck's "Towards a pure ontology: Children's bodies and morality" ["Educational Philosophy and Theory," vol. 46 (1), 2014, pp. 8-23 (EJ1026561)]. His arguments from Nietzsche and Spinoza do not carry the weight he supposes, and the conclusions he draws from them about pedagogy would be…

  16. Emerging Environment Friendly, Magnesium-Based Composite Technology for Present and Future Generations

    NASA Astrophysics Data System (ADS)

    Meenashisundaram, G. K.; Gupta, M.

    2016-07-01

    Magnesium is the lightest and one of the most abundant elements in the universe. In addition, magnesium possesses several other benefits like excellent castability, high damping capacity, good electromagnetic shielding, and excellent machinability. These inherent characteristics of magnesium-based materials ensure fuel economy, reduced CO2 emissions, and a greener earth. Furthermore, as magnesium-based materials are almost 35% lighter than aluminum-based materials, a tremendous surge in magnesium demand over the next 5 years is expected. One way in which the engineering capabilities of magnesium and its alloys can further be enhanced is to use composite technology. The addition of nanoparticles, for example, leads to enhanced tensile, compressive, fatigue, creep, dynamic, tribological, and corrosion properties. In addition, amorphous and hollow reinforcements can also enhance targeted mechanical/physical properties. Accordingly, the present study will highlight the key capabilities of magnesium-based composite technology. An attempt is made to summarize on the size effects and type of reinforcements such as metallic or ceramic nanoparticles, and amorphous and hollow reinforcements on the microstructural and mechanical properties of monolithic pure magnesium.

  17. Magnesium Hall Thruster

    NASA Technical Reports Server (NTRS)

    Szabo, James J.

    2015-01-01

    This Phase II project is developing a magnesium (Mg) Hall effect thruster system that would open the door for in situ resource utilization (ISRU)-based solar system exploration. Magnesium is light and easy to ionize. For a Mars- Earth transfer, the propellant mass savings with respect to a xenon Hall effect thruster (HET) system are enormous. Magnesium also can be combusted in a rocket with carbon dioxide (CO2) or water (H2O), enabling a multimode propulsion system with propellant sharing and ISRU. In the near term, CO2 and H2O would be collected in situ on Mars or the moon. In the far term, Mg itself would be collected from Martian and lunar regolith. In Phase I, an integrated, medium-power (1- to 3-kW) Mg HET system was developed and tested. Controlled, steady operation at constant voltage and power was demonstrated. Preliminary measurements indicate a specific impulse (Isp) greater than 4,000 s was achieved at a discharge potential of 400 V. The feasibility of delivering fluidized Mg powder to a medium- or high-power thruster also was demonstrated. Phase II of the project evaluated the performance of an integrated, highpower Mg Hall thruster system in a relevant space environment. Researchers improved the medium power thruster system and characterized it in detail. Researchers also designed and built a high-power (8- to 20-kW) Mg HET. A fluidized powder feed system supporting the high-power thruster was built and delivered to Busek Company, Inc.

  18. In vitro degradation of pure Mg in response to glucose

    PubMed Central

    Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

    2015-01-01

    Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results. PMID:26264413

  19. In vitro degradation of pure Mg in response to glucose

    NASA Astrophysics Data System (ADS)

    Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

    2015-08-01

    Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results.

  20. ? - ? Double twinning in magnesium

    NASA Astrophysics Data System (ADS)

    Jäger, Aleš; Ostapovets, Andriy; Molnár, Peter; Lejček, Pavel

    2011-08-01

    It is demonstrated that metalworking processes performed at different temperatures can lead to the ? - ? double twinning. This twinning mode has been observed during direct extrusion of the coarse-grained Mg-0.3at.%Al alloy at 433 K and analysed in detail on room-temperature rolled magnesium single crystal with the c-axis parallel to transverse direction and the a-axis parallel to rolling direction. The ? - ? double twins originated during initial stage of the formation on coarse-grained and single-crystalline structure.

  1. Magnesium in Prevention and Therapy

    PubMed Central

    Gröber, Uwe; Schmidt, Joachim; Kisters, Klaus

    2015-01-01

    Magnesium is the fourth most abundant mineral in the body. It has been recognized as a cofactor for more than 300 enzymatic reactions, where it is crucial for adenosine triphosphate (ATP) metabolism. Magnesium is required for DNA and RNA synthesis, reproduction, and protein synthesis. Moreover, magnesium is essential for the regulation of muscular contraction, blood pressure, insulin metabolism, cardiac excitability, vasomotor tone, nerve transmission and neuromuscular conduction. Imbalances in magnesium status—primarily hypomagnesemia as it is seen more common than hypermagnesemia—might result in unwanted neuromuscular, cardiac or nervous disorders. Based on magnesium’s many functions within the human body, it plays an important role in prevention and treatment of many diseases. Low levels of magnesium have been associated with a number of chronic diseases, such as Alzheimer’s disease, insulin resistance and type-2 diabetes mellitus, hypertension, cardiovascular disease (e.g., stroke), migraine headaches, and attention deficit hyperactivity disorder (ADHD). PMID:26404370

  2. Purely Cortical Anaplastic Ependymoma

    PubMed Central

    Romero, Flávio Ramalho; Zanini, Marco Antônio; Ducati, Luis Gustavo; Vital, Roberto Bezerra; de Lima Neto, Newton Moreira; Gabarra, Roberto Colichio

    2012-01-01

    Ependymomas are glial tumors derived from ependymal cells lining the ventricles and the central canal of the spinal cord. It may occur outside the ventricular structures, representing the extraventicular form, or without any relationship of ventricular system, called ectopic ependymona. Less than fifteen cases of ectopic ependymomas were reported and less than five were anaplastic. We report a rare case of pure cortical ectopic anaplastic ependymoma. PMID:23119204

  3. Purely cortical anaplastic ependymoma.

    PubMed

    Romero, Flávio Ramalho; Zanini, Marco Antônio; Ducati, Luis Gustavo; Vital, Roberto Bezerra; de Lima Neto, Newton Moreira; Gabarra, Roberto Colichio

    2012-01-01

    Ependymomas are glial tumors derived from ependymal cells lining the ventricles and the central canal of the spinal cord. It may occur outside the ventricular structures, representing the extraventicular form, or without any relationship of ventricular system, called ectopic ependymona. Less than fifteen cases of ectopic ependymomas were reported and less than five were anaplastic. We report a rare case of pure cortical ectopic anaplastic ependymoma.

  4. Magnesium Battery Electrolytes in Ionic Liquids

    NASA Astrophysics Data System (ADS)

    Watkins, Tylan Strike

    A lack of adequate energy storage technologies is arguably the greatest hindrance to a modern sustainable energy infrastructure. Chemical energy storage, in the form of batteries, is an obvious solution to the problem. Unfortunately, today's state of the art battery technologies fail to meet the desired metrics for full scale electric grid and/or electric vehicle role out. Considerable effort from scientists and engineers has gone into the pursuit of battery chemistries theoretically capable of far outperforming leading technologies like Li-ion cells. For instance, an anode of the relatively abundant and cheap metal, magnesium, would boost the specific energy by over 4.6 times that of the current Li-ion anode (LiC6). The work presented here explores the compatibility of magnesium electrolytes in TFSI---based ionic liquids with a Mg anode (TFSI = bis(trifluoromethylsulfonyl)imide). Correlations are made between the Mg2+ speciation conditions in bulk solutions (as determined via Raman spectroscopy) and the corresponding electrochemical behavior of the electrolytes. It was found that by creating specific chelating conditions, with an appropriate Mg salt, the desired electrochemical behavior could be obtained, i.e. reversible electrodeposition and dissolution. Removal of TFSI -- contact ion pairs from the Mg2+ solvation shell was found to be essential for reversible electrodeposition. Ionic liquids with polyethylene glycol chains pendent from a parent pyrrolidinium cation were synthesized and used to create the necessary complexes with Mg 2+, from Mg(BH4)2, so that reversible electrodeposition from a purely ionic liquid medium was achieved. The following document discusses findings from several electrochemical experiments on magnesium electrolytes in ionic liquids. Explanations for the failure of many of these systems to produce reversible Mg electrodeposition are provided. The key characteristics of ionic liquid systems that are capable of achieving reversible Mg

  5. Pure Lovelock Kasner metrics

    NASA Astrophysics Data System (ADS)

    Camanho, Xián O.; Dadhich, Naresh; Molina, Alfred

    2015-09-01

    We study pure Lovelock vacuum and perfect fluid equations for Kasner-type metrics. These equations correspond to a single Nth order Lovelock term in the action in d=2N+1,2N+2 dimensions, and they capture the relevant gravitational dynamics when aproaching the big-bang singularity within the Lovelock family of theories. Pure Lovelock gravity also bears out the general feature that vacuum in the critical odd dimension, d=2N+1, is kinematic, i.e. we may define an analogue Lovelock-Riemann tensor that vanishes in vacuum for d=2N+1, yet the Riemann curvature is non-zero. We completely classify isotropic and vacuum Kasner metrics for this class of theories in several isotropy types. The different families can be characterized by means of certain higher order 4th rank tensors. We also analyze in detail the space of vacuum solutions for five- and six dimensional pure Gauss-Bonnet theory. It possesses an interesting and illuminating geometric structure and symmetries that carry over to the general case. We also comment on a closely related family of exponential solutions and on the possibility of solutions with complex Kasner exponents. We show that the latter imply the existence of closed timelike curves in the geometry.

  6. Synthesis of magnesium diboride by magnesium vapor infiltration process (MVIP)

    DOEpatents

    Serquis, Adriana C.; Zhu, Yuntian T.; Mueller, Frederick M.; Peterson, Dean E.; Liao, Xiao Zhou

    2003-01-01

    A process of preparing superconducting magnesium diboride powder by heating an admixture of solid magnesium and amorphous boron powder or pellet under an inert atmosphere in a Mg:B ratio of greater than about 0.6:1 at temperatures and for time sufficient to form said superconducting magnesium diboride. The process can further include exposure to residual oxygen at high synthesis temperatures followed by slow cooling. In the cooling process oxygen atoms dissolved into MgB.sub.2 segregated to form nanometer-sized coherent Mg(B,O) precipitates in the MgB.sub.2 matrix, which can act as flux pinning centers.

  7. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  8. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to...

  9. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  10. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  11. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food... Specific Substances Affirmed as GRAS § 184.1431 Magnesium oxide. (a) Magnesium oxide (MgO, CAS Reg. No... bulky white powder (light) or a relatively dense white powder (heavy) by heating magnesium hydroxide...

  12. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to...

  13. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to...

  14. Mineral resource of the month: magnesium

    USGS Publications Warehouse

    Kramer, Deborah A.

    2012-01-01

    Magnesium is the eighthmost abundant element in Earth’s crust, and the second-most abundant metal ion in seawater. Although magnesium is found in more than 60 minerals, only brucite, dolomite, magnesite and carnallite are commercially important for their magnesium content. Magnesium and its compounds also are recovered from seawater, brines found in lakes and wells, and bitterns (salts).

  15. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to...

  16. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  17. 7 CFR 917.8 - Pure grower or pure producer.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 917.8 Pure grower or pure producer. (a) For peaches,...

  18. 7 CFR 917.8 - Pure grower or pure producer.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 917.8 Pure grower or pure producer. (a) For peaches,...

  19. In situ synthesis of magnesium-substituted biphasic calcium phosphate and in vitro biodegradation

    SciTech Connect

    Kim, Tae-Wan; Lee, Hyeong-Shin; Kim, Dong-Hyun; Jin, Hyeong-Ho; Hwang, Kyu-Hong; Lee, Jong Kook; Park, Hong-Chae; Yoon, Seog-Young

    2012-09-15

    Highlights: ► Mg–BCP were successfully prepared through in situ aqueous co-precipitation method. ► The amount of β-TCP phase was changed with the magnesium substitution level. ► The substitution of magnesium led to a decrease in the unit cell volume. ► Mg–BCP could be able to develop a new apatite phase on the surface faster than BCP. -- Abstract: In situ preparation of magnesium (Mg) substituted biphasic calcium phosphate (BCP) of hydroxyapatite (HAp)/β-tricalcium phosphate (β-TCP) were carried out through aqueous co-precipitation method. The concentrations of added magnesium were varied with the calcium in order to obtain constant (Ca + Mg)/P ratios of 1.602. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized magnesium substituted BCP powders. The results have shown that substitution of magnesium in the calcium deficient apatites revealed the formation of biphasic mixtures of different HAp/β-TCP ratios after heating at 1000 °C. The ratios of the formation of phase mixtures were dependent on the content of magnesium. After immersing in Hanks’ balanced salt solution (HBSS) for 1 week, 1 wt% magnesium substituted BCP powders were degraded and precipitation started to be formed with small granules consisting of number of flake-like crystal onto the surface of synthesized powders. On the other hand, in the case of pure BCP powders, the formation of new precipitates was detected after immersion in HBSS for 2 weeks. On the basis of these results, magnesium substituted BCP could be able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. In addition, the retention time to produce the new apatite phase in implantation operation for the BCP powder could be controlled by the amount of magnesium substitution.

  20. Magnesium homeostasis and aging.

    PubMed

    Barbagallo, Mario; Belvedere, Mario; Dominguez, Ligia J

    2009-12-01

    Aging is very often associated with magnesium (Mg) deficit. Total plasma magnesium concentrations are remarkably constant in healthy subjects throughout life, while total body Mg and Mg in the intracellular compartment tend to decrease with age. Dietary Mg deficiencies are common in the elderly population. Other frequent causes of Mg deficits in the elderly include reduced Mg intestinal absorption, reduced Mg bone stores, and excess urinary loss. Secondary Mg deficit in aging may result from different conditions and diseases often observed in the elderly (i.e. insulin resistance and/or type 2 diabetes mellitus) and drugs (i.e. use of hypermagnesuric diuretics). Chronic Mg deficits have been linked to an increased risk of numerous preclinical and clinical outcomes, mostly observed in the elderly population, including hypertension, stroke, atherosclerosis, ischemic heart disease, cardiac arrhythmias, glucose intolerance, insulin resistance, type 2 diabetes mellitus, endothelial dysfunction, vascular remodeling, alterations in lipid metabolism, platelet aggregation/thrombosis, inflammation, oxidative stress, cardiovascular mortality, asthma, chronic fatigue, as well as depression and other neuropsychiatric disorders. Both aging and Mg deficiency have been associated to excessive production of oxygen-derived free radicals and low-grade inflammation. Chronic inflammation and oxidative stress are also present in several age-related diseases, such as many vascular and metabolic conditions, as well as frailty, muscle loss and sarcopenia, and altered immune responses, among others. Mg deficit associated to aging may be at least one of the pathophysiological links that may help to explain the interactions between inflammation and oxidative stress with the aging process and many age-related diseases.

  1. Mechanical degradation of porous titanium with entangled structure filled with biodegradable magnesium in Hanks' solution.

    PubMed

    Li, Qiuyan; Jiang, Guofeng; Wang, Cunlong; Dong, Jie; He, Guo

    2015-12-01

    The degradation behavior of the porous titanium with entangled structure filled with biodegradable magnesium (p-Ti/Mg) in Hanks' solution was investigated. It was found that the p-Ti/Mg composite had higher strength than pure magnesium and porous titanium with entangled structure (p-Ti). Although the magnesium in p-Ti/Mg was completely dissolved in Hanks' solution after immersion for 104 h, the rest of the sample still maintained strength of about 86 MPa. Moreover, the produced porousness (due to magnesium-degradation) could provide channels for the ingrowth and transportation of bone cells. However, the high corrosion rate of p-Ti/Mg is still a problem when used as a candidate biomedical material, which needs further improvement.

  2. Magnesium-aspartate-based crystallization switch inspired from shell molt of crustacean

    PubMed Central

    Tao, Jinhui; Zhou, Dongming; Zhang, Zhisen; Xu, Xurong; Tang, Ruikang

    2009-01-01

    Many animals such as crustacean periodically undergo cyclic molt of the exoskeleton. During this process, amorphous calcium mineral phases are biologically stabilized by magnesium and are reserved for the subsequent rapid formation of new shell tissue. However, it is a mystery how living organisms can regulate the transition of the precursor phases precisely. We reveal that the shell mineralization from the magnesium stabilized precursors is associated with the presence of Asp-rich proteins. It is suggested that a cooperative effect of magnesium and Asp-rich compound can result into a crystallization switch in biomineralization. Our in vitro experiments confirm that magnesium increases the lifetime of amorphous calcium carbonate and calcium phosphate in solution so that the crystallization can be temporarily switched off. Although Asp monomer alone inhibits the crystallization of pure amorphous calcium minerals, it actually reduces the stability of the magnesium-stabilized precursors to switch on the transformation from the amorphous to crystallized phases. These modification effects on crystallization kinetics can be understood by an Asp-enhanced magnesium desolvation model. The interesting magnesium-Asp-based switch is a biologically inspired lesson from nature, which can be developed into an advanced strategy to control material fabrications. PMID:20007788

  3. Nutritional Aspects of Magnesium Metabolism

    PubMed Central

    Flink, Edmund B.

    1980-01-01

    The absolute necessity for magnesium in plant and animal nutrition is easily appreciated when one realizes that magnesium is found in high concentration in cells. It is necessary for photosynthesis in plants and for all reactions involving adenosine triphosphate in plant and animal cells. Although it is abundant in nature in general, deficiencies occur in both plants and animals. Human beings need about 5 mg of magnesium per kg of body weight per day. Infants and young children need twice as much. Children and women during pregnancy or lactation require significantly greater amounts than normal adults. Various diseases result in a deficiency of magnesium because of interruption of food intake or intestinal or renal wasting of the mineral. PMID:7347045

  4. Magnesium Alloys and their Applications

    NASA Astrophysics Data System (ADS)

    Kainer, Karl U.

    1999-04-01

    In the recent years there has been a dramatic increase in research activity and also applications of magnesium alloys. The driving force is the growing demand by the automobile industry resulting from the pressure to reduce weight and hence to reduce the fuel consumption. The U.S. car industry incorporates the largest amount of magnesium at the present time. In Europe, Volkswagen had a history of using magnesium in the VW Beetle. Volkswagen, in common with other major car producers has initiated a major research and development programme for advanced magnesium materials. The main emphasis of this book is in the field of general physical metallurgy and alloy development refelcting the need to provide a wider range of alloys both casting and wrought alloys to meet the increasing demands of industry. Other topics are nevertheless well represented such as casting, recycling, joining, corrosion, and surface treatment.

  5. Viscosity of pure hydrocarbons

    SciTech Connect

    Knapstad, B.; Skjolsvik, P.A.; Oye, H.A.

    1989-01-01

    Accurate viscosity measurements have been performed on eight pure hydrocarbons at atmospheric pressure in the temperature range 20-150/sup 0/C, or up to approximately 20/sup 0/C below the boiling point of the hydrocarbon, by use of an absolute oscillating viscometer. The hydrocarbons are cyclohexane and benzene and the n-alkanes of hexane, heptane, octane, decane, dodecane, and tetradecane. The viscosities are described with a modified Arrhenius equation, and the deviation in fit is 0.12% or less. The accuracy is estimated to be 0.33-0.56%. The lowest viscosities are assumed to have the highest deviation. Literature data reported by Dymond and Young normally fit our viscosities within our estimated accuracy. Other literature viscosities tend to be higher than our results, especially for the n-alkanes.

  6. 76 FR 13356 - Magnesium Metal From the People's Republic of China: Continuation of Antidumping Duty Order

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-11

    ..., 75 FR 9160 (March 1, 2010). As a result of its review, the Department determined that revocation of... Federation: Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 75 FR 38983 (July 7... Russian Federation, 60 FR 25691 (May 12, 1995), and Antidumping Duty Order: Pure Magnesium in...

  7. 76 FR 56396 - Magnesium Metal from the Russian Federation: Final Results of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-13

    ... of Antidumping Duty Administrative Review, 76 FR 26247 (May 6, 2011) (Preliminary Results). We... FR 13128 (March 10, 2011). The subject merchandise includes the following pure and alloy magnesium... Granular Form From the People's Republic of China, 66 FR 49345 (September 27, 2001), Notice of...

  8. Weakening of ice by magnesium perchlorate hydrate

    USGS Publications Warehouse

    Lenferinka, Hendrick J.; Durhama, William B.; Sternb, Laura A.; Patharec, Asmin V.

    2013-01-01

    We show that perchlorate hydrates, which have been detected at high circumpolar martian latitudes, have a dramatic effect upon the rheological behavior of polycrystalline water ice under conditions applicable to the North Polar Layered Deposits (NPLD). We conducted subsolidus creep tests on mixtures of ice and magnesium perchlorate hydrate, Mg(ClO4)2·6H2O (MP6), of 0.02, 0.05, 0.10, and 0.47 volume fraction MP6. We found these mixtures to be increasingly weak with increasing MP6 content. For mixtures with ⩽0.10 volume fraction MP6, we resolved a stress exponent of n ≈ 2 at low stresses transitioning to n ≈ 4 above 10 MPa. Scanning electron microscopy of deformed specimens revealed MP6 to be distributed as an interconnected film between ice grains. These results suggest that grain boundary sliding (GBS) may be enhanced with respect to pure ice. As the enhancement of GBS is expected in polycrystalline aggregates containing a few percent melt or otherwise weak material distributed along grain boundaries, the observed n ≈ 2 is consistent with the mutual accommodation of basal slip and GBS. If ice containing trace concentrations of MP6 is also much weaker than pure ice at low stresses, flow in the NPLD could be significantly enhanced, particularly at the warmer basal temperatures associated with higher martian obliquities.

  9. Studies on structural properties of clay magnesium ferrite nano composite

    SciTech Connect

    Kaur, Manpreet Singh, Mandeep; Jeet, Kiran Kaur, Rajdeep

    2015-08-28

    Magnesium ferrite-bentonite clay composite was prepared by sol-gel combustion method employing citric acid as complexing agent and fuel. The effect of clay on the structural properties was studied with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) Spectroscopy, Scanning electron microscopy (SEM), SEM- Energy dispersive Spectroscope (EDS) and BET surface area analyzer. Decrease in particle size and density was observed on addition of bentonite clay. The BET surface area of nano composite containing just 5 percent clay was 74.86 m{sup 2}/g. Whereas porosity increased from 40.5 per cent for the pure magnesium ferrite to 81.0 percent in the composite showing that nano-composite has potential application as an adsorbent.

  10. Magnesium and Dialysis: The Neglected Cation.

    PubMed

    Alhosaini, Mohamad; Leehey, David J

    2015-09-01

    Disorders of magnesium homeostasis are very common in dialysis patients but have received scant attention. In this review, we address measurement of plasma magnesium, magnesium balance and the factors that affect magnesium flux during dialysis, the prevalence of hypo- and hypermagnesemia in dialysis patients, and the potential clinical significance of hypo- and hypermagnesemia in dialysis patients. Many factors can affect plasma magnesium concentration, including diet, nutritional status (including plasma albumin level), medications (such as proton pump inhibitors), and dialysis prescription. Further interventional studies to determine the effect of normalization of plasma magnesium concentration on clinical outcomes are needed. At the present time, we recommend that predialysis plasma magnesium be measured on a regular basis, with the dialysate magnesium concentration adjusted to maintain plasma magnesium concentration within the normal range.

  11. Corrosion behavior of chromium and oxygen plasma-modified magnesium in sulfate solution and simulated body fluid

    NASA Astrophysics Data System (ADS)

    Xu, Ruizhen; Wu, Guosong; Yang, Xiongbo; Zhang, Xuming; Wu, Zhengwei; Sun, Guangyong; Li, Guangyao; Chu, Paul K.

    2012-08-01

    Because of the unique mechanical properties and biocompatibility, magnesium and its alloys have large potential as lightweight structural materials in the industry in addition to being naturally degradable and resorbable biomaterials. However, their corrosion resistance is usually inadequate especially in an aqueous environment. In this work, pure magnesium is implanted with chromium and oxygen by plasma immersion ion implantation (PIII) and the corrosion behavior is systematically investigated in simulated body fluid and sodium sulfate solution by polarization tests and electrochemical impedance spectroscopy. Our results reveal that chromium and oxygen ion-implanted magnesium have a lower corrosion rate and exhibit less pitting corrosion in the two solutions.

  12. Magnesium and fetal growth

    SciTech Connect

    Weaver, K.

    1988-01-01

    Fetal growth retardation and premature labor are major problems in perinatal medicine today and account for a great deal of the observed fetal morbidity. While the neonatal death rate has steadily declined over the past decade, there has been a lack of concommitant decrease in these two leading problems. Magnesium (Mg/sup ++/) plays a major role in both of these areas of concern. The fact that it is used as a treatment for premature labor has led investigators to look at low Mg/sup ++/ as a possible cause of this poorly understood phenomenon. The second major cause of small for gestational age infants is intrauterine growth retardation, a condition which may be of either fetal or maternal origin. In either case, Mg/sup ++/ may be implicated since it exerts a strong influence on the underlying pathophysiology of placental failure and maternal hypertension. Both of these conditions are mediated by vascular and platelet hyperactivity as well as by and increase in the ration of thromboxane to prostacyclin. Studies in both the human and animal species are beginning to show how Mg/sup ++/ interacts in these conditions to produce such a damaging fetal outcome. The recent use of Doppler velocimetry of the developing fetus has shown reduced fetal vascular and maternal uterine vascular compliance as early as 14 weeks of gestation in those who would be so affected.

  13. Magnesium and healthy aging.

    PubMed

    Veronese, Nicola; Zanforlini, Bruno Micael; Manzato, Enzo; Sergi, Giuseppe

    2015-01-01

    Magnesium (Mg) is relatively stable in the intracellular compartment, although decreases linearly with advancing age. This begs the question as to whether Mg could be used as biomarker of aging. A biomarker of aging is a biological parameter of an organism that, in the absence of disease, better predicts functional capability at a later age than the chronological age. Bone and muscle Mg content might be useful biomarkers, but the need for biopsies and the heterogeneous distribution of Mg in bones and muscles strongly limit the application of these methods in clinical practice. Similar considerations can be made for urinary Mg assessment, particularly after a loading test. Markers of Mg in blood seem fairly unreliable as biomarkers of aging since they are strongly dependent upon renal function, do not reflect the intracellular Mg status, and, in some investigations, are within normal ranges although other Mg parameters are not. Other investigations (e.g. nuclear magnetic resonance with fluorescent probes) seem to be promising, but their availability remains limited. PMID:26446714

  14. Cell Adhesion on Surface-Functionalized Magnesium.

    PubMed

    Wagener, Victoria; Schilling, Achim; Mainka, Astrid; Hennig, Diana; Gerum, Richard; Kelch, Marie-Luise; Keim, Simon; Fabry, Ben; Virtanen, Sannakaisa

    2016-05-18

    The biocompatibility of commercially pure magnesium-based (cp Mg) biodegradable implants is compromised of strong hydrogen evolution and surface alkalization due to high initial corrosion rates of cp Mg in the physiological environment. To mitigate this problem, the addition of corrosion-retarding alloying elements or coating of implant surfaces has been suggested. In the following work, we explored the effect of organic coatings on long-term cell growth. cp Mg was coated with aminopropyltriehtoxysilane + vitamin C (AV), carbonyldiimidazole (CDI), or stearic acid (SA). All three coatings have been previously suggested to reduce initial corrosion and to enhance protein adsorption and hence cell adhesion on magnesium surfaces. Endothelial cells (DH1+/+) and osteosarcoma cells (MG63) were cultured on coated samples for up to 20 days. To quantify Mg corrosion, electrochemical impedance spectroscopy (EIS) was measured after 1, 3, and 5 days of cell culture. We also investigated the speed of initial cell spreading after seeding using fluorescently labeled fibroblasts (NIH/3T3). Hydrogen evolution after contact with cell culture medium was markedly decreased on AV- and SA-coated Mg compared to uncoated Mg. These coatings also showed improved cell adhesion and spreading after 24 h of culture comparable to tissue-treated plastic surfaces. On AV-coated cp Mg, a confluent layer of endothelial cells formed after 5 days and remained intact for up to 20 days. Together, these data demonstrate that surface coating with AV is a viable strategy for improving long-term biocompatibility of cp Mg-based implants. EIS measurements confirmed that the presence of a confluent cell layer increased the corrosion resistance. PMID:27089250

  15. Magnesium silicide intermetallic alloys

    NASA Astrophysics Data System (ADS)

    Li, Gh.; Gill, H. S.; Varin, R. A.

    1993-11-01

    Methods of induction melting an ultra-low-density magnesium silicide (Mg2Si) intermetallic and its alloys and the resulting microstructure and microhardness were studied. The highest quality ingots of Mg2Si alloys were obtained by triple melting in a graphite crucible coated with boron nitride to eliminate reactivity, under overpressure of high-purity argon (1.3 X 105 Pa), at a temperature close to but not exceeding 1105 °C ± 5 °C to avoid excessive evaporation of Mg. After establishing the proper induction-melting conditions, the Mg-Si binary alloys and several Mg2Si alloys macroalloyed with 1 at. pct of Al, Ni, Co, Cu, Ag, Zn, Mn, Cr, and Fe were induction melted and, after solidification, investigated by optical microscopy and quantitative X-ray energy dispersive spectroscopy (EDS). Both the Mg-rich and Si-rich eutectic in the binary alloys exhibited a small but systematic increase in the Si content as the overall composition of the binary alloy moved closer toward the Mg2Si line compound. The Vickers microhardness (VHN) of the as-solidified Mg-rich and Si-rich eutectics in the Mg-Si binary alloys decreased with increasing Mg (decreasing Si) content in the eutectic. This behavior persisted even after annealing for 75 hours at 0.89 pct of the respective eutectic temperature. The Mg-rich eutectic in the Mg2Si + Al, Ni, Co, Cu, Ag, and Zn alloys contained sections exhibiting a different optical contrast and chemical composition than the rest of the eutectic. Some particles dispersed in the Mg2Si matrix were found in the Mg2Si + Cr, Mn, and Fe alloys. The EDS results are presented and discussed and compared with the VHN data.

  16. Effect of fabrication and processing technology on the biodegradability of magnesium nanocomposites.

    PubMed

    Ma, Chao; Chen, Lianyi; Xu, Jiaquan; Fehrenbacher, Axel; Li, Yan; Pfefferkorn, Frank E; Duffie, Neil A; Zheng, Jing; Li, Xiaochun

    2013-07-01

    Magnesium and its alloys have gained significant attention recently as potential alternatives for biodegradable materials due to their unique biodegradability, biocompatibility, and mechanical properties. However, magnesium alloys tend to have high corrosion rates in biological liquids, thus presenting a potential problem if a magnesium implant/device needs to maintain mechanical integrity for a sufficient period under practical physiological conditions. In this study, hydroxyapatite nanoparticles were used to form magnesium based metal matrix nanocomposites (MMNC) through two processes: friction stir processing (FSP) and a two-state nanoprocessing (TSnP) combining liquid state ultrasonic processing and solid state FSP. In addition, laser surface melting (LSM) was carried out for further surface treatment. In vitro immersion tests indicated that the corrosion rate of MMNC decreased by 52% compared with pure Mg through FSP. Potentiodynamic polarization tests showed that the corrosion current of MMNC decreased by 71% and 30%, respectively, by TSnP and LSM when compared with pure Mg or untreated counterparts. This study suggests that fabrication of MMNC and further processing through FSP and LSM can robustly enhance the corrosion resistance of magnesium, which will boost its potential for biological applications.

  17. Magnesium Based Materials and their Antimicrobial Activity

    NASA Astrophysics Data System (ADS)

    Robinson, Duane Allan

    The overall goals of this body of work were to characterize the antimicrobial properties of magnesium (Mg) metal and nano-magnesium oxide (nMgO) in vitro, to evaluate the in vitro cytotoxicity of Mg metal, and to incorporate MgO nanoparticles into a polymeric implant coating and evaluate its in vitro antimicrobial properties. In the course of this work it was found that Mg metal, Mg-mesh, and nMgO have in vitro antimicrobial properties that are similar to a bactericidal antibiotic. For Mg metal, the mechanism of this activity appears to be related to an increase in pH (i.e. a more alkaline environment) and not an increase in Mg2+. Given that Mg-mesh is a Mg metal powder, the assumption is that it has the same mechanism of activity as Mg metal. The mechanism of activity for nMgO remains to be elucidated and may be related to a combination of interaction of the nanoparticles with the bacteria and the alkaline pH. It was further demonstrated that supernatants from suspensions of Mg-mesh and nMgO had the same antimicrobial effect as was noted when the particles were used. The supernatant from Mg-mesh and nMgO was also noted to prevent biofilm formation for two Staphylococcus strains. Finally, poly-epsilon-caprolactone (PCL) composites of Mg-mesh (PCL+Mg-mesh) and nMgO (PCL+nMgO) were produced. Coatings applied to screws inhibited growth of Escherichia coli and Pseudomonas aeruginosa and in thin disc format inhibited the growth of Staphylococcus aureus in addition to the E. coli and P. aeruginosa. Pure Mg metal was noted to have some cytotoxic effect on murine fibroblast and osteoblast cell lines, although this effect needs to be characterized further. To address the need for an in vivo model for evaluating implant associated infections, a new closed fracture osteomyelitis model in the femur of the rat was developed. Magnesium, a readily available and inexpensive metal was shown to have antimicrobial properties that appear to be related to its corrosion products and

  18. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  19. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  20. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  1. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  2. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  3. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  4. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  5. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  6. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  7. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  8. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  9. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  10. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  11. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  12. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  13. Magnesium/Calcium Competition at Excitable Membranes.

    ERIC Educational Resources Information Center

    Belzer, Bill; Fry, Panni

    1998-01-01

    Considers some consequences of altering intracellular calcium supply by magnesium concentration changes. Focuses on using this procedure as an exercise with allied health students as they witness therapeutic uses of magnesium and other calcium entry inhibitors. (DDR)

  14. An anticorrosive magnesium/carbon nanotube composite

    NASA Astrophysics Data System (ADS)

    Endo, M.; Hayashi, T.; Itoh, I.; Kim, Y. A.; Shimamoto, D.; Muramatsu, H.; Shimizu, Y.; Morimoto, S.; Terrones, M.; Iinou, S.; Koide, S.

    2008-02-01

    Here, we report a drastically improved anticorrosive characteristic of magnesium alloy composites with the introduction of multiwalled carbon nanotubes. Highly depressed corrosion of nanotube-filled magnesium composite in salt water is due to the formation of stable oxide films along the grain boundaries of magnesium. Our results indicate that carbon nanotube acted as effective multifunctional filler to improve both mechanical and anticorrosive performances of magnesium alloy.

  15. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  16. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food... GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS Reg. No. 7786-30-3) is a... prepared by dissolving magnesium oxide, hydroxide, or carbonate in aqueous hydrochloric acid solution...

  17. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  18. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate by the addition of...

  19. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food... GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS Reg. No. 10034-99-8) occurs naturally as the mineral epsomite. It is prepared by neutralization of magnesium oxide, hydroxide,...

  20. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  1. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  2. Solid-state rechargeable magnesium battery

    DOEpatents

    Shao, Yuyan; Liu, Jun; Liu, Tianbiao; Li, Guosheng

    2016-09-06

    Embodiments of a solid-state electrolyte comprising magnesium borohydride, polyethylene oxide, and optionally a Group IIA or transition metal oxide are disclosed. The solid-state electrolyte may be a thin film comprising a dispersion of magnesium borohydride and magnesium oxide nanoparticles in polyethylene oxide. Rechargeable magnesium batteries including the disclosed solid-state electrolyte may have a coulombic efficiency .gtoreq.95% and exhibit cycling stability for at least 50 cycles.

  3. Dislocation Creep in Magnesium Calcite

    NASA Astrophysics Data System (ADS)

    Xu, L.; Xiao, X.; Evans, B. J.

    2003-12-01

    To investigate the effect of dissolved Mg on plastic deformation of calcite, we performed triaxial deformation experiments on synthetic calcite with varying amount of Mg content. Mixtures of powders of calcite and dolomite were isostatically hot pressed (HIP) at 850° C and 300 MPa confining pressure for different intervals (2 to 20hrs) resulting in homogeneous aggregates of high-magnesium calcite; Mg content varied from 0.07 to 0.17 mol%. Creep tests were performed at differential stresses from 20 to 160 MPa at 700 to 800° C. Grain sizes before and after deformation were determined from the images obtained from scanning electron microscope (SEM) and optical microscope. Grain sizes are in the range of 5 to 20 microns depending on the HIP time, and decrease with increasing magnesium content. Both BSE images and chemical analysis suggest that all dolomite are dissolved and the Mg distribution is homogeneous through the sample, after 2 hrs HIP. At stresses below 40 MPa, the samples deformed in diffusion region (Coble creep), as described previously by Herwegh. The strength decreases with increasing magnesium content, owing to the difference of grain size. At stresses above 80 MPa, the stress exponent is greater than 3, indicating an increased contribution of dislocation creep. The transition between diffusion to dislocation creep occurs at higher stresses for the samples with higher magnesium content and smaller grain size. Preliminary data suggests a slight increase in strength with increasing magnesium content, but more tests are needed to verify this effect. In a few samples, some strain weakening may have been evident. The activation energy in the transition region (at 80 MPa) is ˜200 KJ/mol with no dependence on magnesium content, agreeing with previous measurements of diffusion creep in natural and synthetic marbles.

  4. Intravenous magnesium for acute asthma?

    PubMed

    2003-10-01

    Each year in the UK, around 1,500 people die from asthma. Standard treatment has been based on bronchodilators (e.g. beta 2-stimulants) and anti-inflammatory drugs (corticosteroids). The recently revised British Guideline on the Management of Asthma suggests also using a single dose of i.v. magnesium sulphate in patients with acute severe asthma, an unlicensed indication. Here we discuss the rationale for giving i.v. magnesium and whether it offers any advantage for patients with acute severe asthma.

  5. Primary magnesium production costs for automotive applications

    NASA Astrophysics Data System (ADS)

    Das, Sujit

    2008-11-01

    Focusing on primary magnesium production cost estimates, this paper provides a forecast of the long-term competitiveness of magnesium in automotive applications. Competing magnesium production technologies are considered, with particular emphasis on the long-term viability of cheap supplies using Chinese production technology. Also considered are two yet-to-be commercialized production processes.

  6. Synthesis of superconducting magnesium diboride objects

    DOEpatents

    Finnemore, Douglas K.; Canfield, Paul C.; Bud'ko, Sergey L.; Ostenson, Jerome E.; Petrovic, Cedomir; Cunningham, Charles E.; Lapertot, Gerard

    2003-08-15

    A process to produce magnesium diboride objects from boron objects with a similar form is presented. Boron objects are reacted with magnesium vapor at a predetermined time and temperature to form magnesium diboride objects having a morphology similar to the boron object's original morphology.

  7. Synthesis Of Superconducting Magnesium Diboride Objects.

    DOEpatents

    Finnemore, Douglas K.; Canfield, Paul C.; Bud'ko, Sergey L.; Ostenson, Jerome E.; Petrovic, Cedomir; Cunningham, Charles E.; Lapertot, Gerard

    2003-07-08

    A process to produce magnesium diboride objects from boron objects with a similar form is presented. Boron objects are reacted with magnesium vapor at a predetermined time and temperature to form magnesium diboride objects having a morphology similar to the boron object's original morphology.

  8. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  9. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  10. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Magnesium labeling. 201.71 Section 201.71 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.71 Magnesium labeling. (a) The labeling of over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  11. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Magnesium labeling. 201.71 Section 201.71 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.71 Magnesium labeling. (a) The labeling of over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  12. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  13. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Magnesium labeling. 201.71 Section 201.71 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.71 Magnesium labeling. (a) The labeling of over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  14. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  15. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  16. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  17. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  18. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  19. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  20. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  1. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  2. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  3. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  4. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  5. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  6. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  7. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  8. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  9. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  10. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  11. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  12. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  13. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  14. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  15. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... GRAS § 184.1428 Magnesium hydroxide. (a) Magnesium hydroxide (Mg(OH)2, CAS Reg. No. 1309-42-8) occurs... magnesium oxide. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p...: (1) The ingredient is used as a nutrient supplement as defined in § 170.3(o)(20) of this chapter; a...

  16. Magnesium-containing mixed coatings on zirconia for dental implants: mechanical characterization and in vitro behavior.

    PubMed

    Pardun, Karoline; Treccani, Laura; Volkmann, Eike; Streckbein, Philipp; Heiss, Christian; Gerlach, Juergen W; Maendl, Stephan; Rezwan, Kurosch

    2015-07-01

    An important challenge in the field of dental and orthopedic implantology is the preparation of implant coatings with bioactive functions that feature a high mechanical stability and at the same time mimic structural and compositional properties of native bone for a better bone ingrowth. This study investigates the influence of magnesium addition to zirconia-calcium phosphate coatings. The mixed coatings were prepared with varying additions of either magnesium oxide or magnesium fluoride to yttria-stabilized zirconia and hydroxyapatite. The coatings were deposited on zirconia discs and screw implants by wet powder spraying. Microstructure studies confirm a porous coating with similar roughness and firm adhesion not hampered by the coating composition. The coating morphology, mechanical flexural strength and calcium dissolution showed a magnesium content-dependent effect. Moreover, the in vitro results obtained with human osteoblasts reveal an improved biological performance caused by the presence of Mg(2+) ions. The magnesium-containing coatings exhibited better cell proliferation and differentiation in comparison to pure zirconia-calcium phosphate coatings. In conclusion, these results demonstrate that magnesium addition increases the bioactivity potential of zirconia-calcium phosphate coatings and is thus a highly suitable candidate for bone implant coatings. PMID:25698722

  17. Facile formation of biomimetic color-tuned superhydrophobic magnesium alloy with corrosion resistance.

    PubMed

    Ishizaki, Takahiro; Sakamoto, Michiru

    2011-03-15

    The design of color-tuned magnesium alloy with anticorrosive properties and damping capacity was created by means of a simple and inexpensive method. The vertically self-aligned nano- and microsheets were formed on magnesium alloy AZ31 by a chemical-free immersion process in ultrapure water at a temperature of 120 °C, resulting in the color expression. The color changed from silver with metallic luster to some specific colors such as orange, green, and orchid, depending on the immersion time. The color-tuned magnesium alloy showed anticorrosive performance and damping capacity. In addition, the colored surface with minute surface textures was modified with n-octadecyltrimethoxysilane (ODS), leading to the formation of color-tuned superhydrophobic surfaces. The corrosion resistance of the color-tuned superhydrophobic magnesium alloy was also investigated using electrochemical potentiodynamic measurements. Moreover, the color-tuned superhydrophobic magnesium alloy showed high hydrophobicity not just for pure water but also for corrosive liquids, such as acidic, basic, and some aqueous salt solutions. In addition, the American Society for Testing and Materials (ASTM) standard D 3359-02 cross cut tape test was performed to investigate the adhesion of the color-tuned superhydrophobic film to the magnesium alloy surface.

  18. Magnesium-containing mixed coatings on zirconia for dental implants: mechanical characterization and in vitro behavior.

    PubMed

    Pardun, Karoline; Treccani, Laura; Volkmann, Eike; Streckbein, Philipp; Heiss, Christian; Gerlach, Juergen W; Maendl, Stephan; Rezwan, Kurosch

    2015-07-01

    An important challenge in the field of dental and orthopedic implantology is the preparation of implant coatings with bioactive functions that feature a high mechanical stability and at the same time mimic structural and compositional properties of native bone for a better bone ingrowth. This study investigates the influence of magnesium addition to zirconia-calcium phosphate coatings. The mixed coatings were prepared with varying additions of either magnesium oxide or magnesium fluoride to yttria-stabilized zirconia and hydroxyapatite. The coatings were deposited on zirconia discs and screw implants by wet powder spraying. Microstructure studies confirm a porous coating with similar roughness and firm adhesion not hampered by the coating composition. The coating morphology, mechanical flexural strength and calcium dissolution showed a magnesium content-dependent effect. Moreover, the in vitro results obtained with human osteoblasts reveal an improved biological performance caused by the presence of Mg(2+) ions. The magnesium-containing coatings exhibited better cell proliferation and differentiation in comparison to pure zirconia-calcium phosphate coatings. In conclusion, these results demonstrate that magnesium addition increases the bioactivity potential of zirconia-calcium phosphate coatings and is thus a highly suitable candidate for bone implant coatings.

  19. Magnesium Diboride Current Leads

    NASA Technical Reports Server (NTRS)

    Panek, John

    2010-01-01

    A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

  20. Magnesium Borohydride as a Hydrogen Storage Material: Synthesis of Unsolvated Mg(BH4)2

    SciTech Connect

    Soloveichik, G.; Andrus, M; Gao, Y; Zhao, J; Kniajanski, S

    2009-01-01

    Different methods for preparation of unsolvated magnesium borohydride, a promising material for hydrogen storage, based on exchange reaction of MgCl2 with lithium and sodium borohydride in different solvents have been evaluated. A convenient scalable method for synthesis of pure Mg(BH4)2 by ball milling a mixture of MgCl2 and NaBH4 in diethyl ether has been developed. Crystalline stable low and high temperature phases, as well as a new metastable phase of unsolvated magnesium borohydride have been prepared.

  1. Dispersion of optical activity of magnesium sulfite hexahydrate single crystals

    NASA Astrophysics Data System (ADS)

    Dimov, T.; Bunzarov, Zh; Iliev, I.; Petkova, P.; Tzoukrovski, Y.

    2010-11-01

    The magnesium sulfite hexahydrate (MgSO3.6H2O) crystals are unique because they are the only representative (with sodium periodate) of the crystallographic class C3 (without a center of symmetry). The crystal symmetry suggests presence of nonlinearity, piezo- and pyro-electric properties and gyrotropy as well. Single crystals of MgSO3.6H2O (pure and doped with Ni, Co and Zn) for the time being are grown only by the original method developed in the Laboratory for Crystal growth at the Faculty of Physics in Sofia University. The first results of optical activity of pure MgSO3.6H2O and Zn doped MgSO3.6H2O crystals are described and analyzed in a wide spectral range. The optical activity manifests itself in the direction (0001) as a rotation of the polarization plane.

  2. Novel Nonflammable Electrolytes for Secondary Magnesium Batteries and High Voltage Electrolytes for Electrochemcial Supercapacitors

    SciTech Connect

    Dixon, Brian

    2008-12-30

    Magnesium has been used successfully in primary batteries, but its use in rechargeable cells has been stymied by the lack of suitable non-aqueous electrolyte that can conduct Mg+2 species, combined with poor stripping and plating properties. The development of a suitable cathode material for rechargeable magnesium batteries has also been a roadblock, but a nonflammable electrolyte is key. Likewise, the development of safe high voltage electrochemical supercapaitors has been stymied by the use of flammable solvents in the liquid electrolyte; to wit, acetonitrile. The purpose of the research conducted in this effort was to identify useful compositions of magnesium salts and polyphosphate solvents that would enable magnesium ions to be cycled within a secondary battery design. The polyphosphate solvents would provide the solvent for the magnesium salts while preventing the electrolyte from being flammable. This would enable these novel electrolytes to be considered as an alternative to THF-based electrolytes. In addition, we explored several of these solvents together with lithium slats for use as high voltage electrolytes for carbon-based electrochemical supercapacitors. The research was successful in that: 1) Magnesium imide dissolved in a phosphate ester solvent that contains a halogented phosphate ester appears to be the preferred electrolyte for a rechargeable Mg cell. 2) A combination of B-doped CNTs and vanadium phosphate appear to be the cathode of choice for a rechargeable Mg cell by virtue of higher voltage and better reversibility. 3) Magnesium alloys appear to perform better than pure magnesium when used in combination with the novel polyphosphate electrolytes. Also, this effort has established that Phoenix Innovation's family of phosphonate/phosphate electrolytes together with specific lithium slats can be used in supercapacitor systems at voltages of greater than 10V.

  3. Major Minerals - Calcium, Magnesium, Phosphorus

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Calcium, magnesium and phosphorus are essential elements critically important for the function of the musculoskeletal system, including the formation and transduction of energy and the maintenance of healthy bone. The major calcium concern for physically active healthy middle-aged adults is to consu...

  4. A SEARCH FOR MAGNESIUM IN EUROPA'S ATMOSPHERE

    SciTech Connect

    Hoerst, S. M.; Brown, M. E.

    2013-02-20

    Europa's tenuous atmosphere results from sputtering of the surface. The trace element composition of its atmosphere is therefore related to the composition of Europa's surface. Magnesium salts are often invoked to explain Galileo Near Infrared Mapping Spectrometer spectra of Europa's surface, thus magnesium may be present in Europa's atmosphere. We have searched for magnesium emission in the Hubble Space Telescope Faint Object Spectrograph archival spectra of Europa's atmosphere. Magnesium was not detected and we calculate an upper limit on the magnesium column abundance. This upper limit indicates that either Europa's surface is depleted in magnesium relative to sodium and potassium, or magnesium is not sputtered as efficiently resulting in a relative depletion in its atmosphere.

  5. The Degradation Interface of Magnesium Based Alloys in Direct Contact with Human Primary Osteoblast Cells

    PubMed Central

    Willumeit-Römer, Regine; Laipple, Daniel; Luthringer, Bérengère; Feyerabend, Frank

    2016-01-01

    Magnesium alloys have been identified as a new generation material of orthopaedic implants. In vitro setups mimicking physiological conditions are promising for material / degradation analysis prior to in vivo studies however the direct influence of cell on the degradation mechanism has never been investigated. For the first time, the direct, active, influence of human primary osteoblasts on magnesium-based materials (pure magnesium, Mg-2Ag and Mg-10Gd alloys) is studied for up to 14 days. Several parameters such as composition of the degradation interface (directly beneath the cells) are analysed with a scanning electron microscope equipped with energy dispersive X-ray and focused ion beam. Furthermore, influence of the materials on cell metabolism is examined via different parameters like active mineralisation process. The results are highlighting the influences of the selected alloying element on the initial cells metabolic activity. PMID:27327435

  6. Cellular response of chondrocytes to magnesium alloys for orthopedic applications

    PubMed Central

    LIAO, YI; XU, QINGLI; ZHANG, JIAN; NIU, JIALING; YUAN, GUANGYIN; JIANG, YAO; HE, YAOHUA; WANG, XINLING

    2015-01-01

    In the present study, the effects of Mg-Nd-Zn-Zr (JDBM), brushite (CaHPO4·2H2O)-coated JDBM (C-JDBM), AZ31, WE43, pure magnesium (Mg) and Ti alloy (TC4) on rabbit chondrocytes were investigated in vitro. Adhesion experiments revealed the satisfactory morphology of chondrocytes on the surface of all samples. An indirect cytotoxicity test using MTT assay revealed that C-JDBM and TC4 exhibited results similar to those of the negative control, better than those obtained with JDBM, AZ31, WE43 and pure Mg (p<0.05). There were no statistically significant differences observed between the JDBM, AZ31, WE43 and pure Mg group (p>0.05). The results of indirect cell cytotoxicity and proliferation assays, as well as those of apoptosis assay, glycosaminoglycan (GAG) quantification, assessment of collagen II (Col II) levels and RT-qPCR revealed a similar a trend as was observed with MTT assay. These findings suggested that the JDBM alloy was highly biocompatible with chondrocytes in vitro, yielding results similar to those of AZ31, WE43 and pure Mg. Furthermore, CaHPO4·2H2O coating significantly improved the biocompatibility of this alloy. PMID:25975216

  7. Magnesium: its role in nutrition and carcinogenesis.

    PubMed

    Blaszczyk, Urszula; Duda-Chodak, Aleksandra

    2013-01-01

    Magnesium (Mg2+) plays a key role in many essential cellular processes such as intermediary metabolism, DNA replication and repair, transporting potassium and calcium ions, cell proliferation together with signalling transduction. Dietary sources rich in magnesium are whole and unrefined grains, seeds, cocoa, nuts, almonds and green leafy vegetables. Hard water is also considered to be an important source of magnesium beneficial to human health. The daily dietary intake of magnesium is however frequently found to be below that recommended in Western countries. Indeed, it is recognised that magnesium deficiency may lead to many disorders of the human body, where for instance magnesium depletion is believed to play an important role in the aetiology of the following; cardiovascular disease (including thrombosis, atherosclerosis, ishaemic heart disease, myocardial infarction, hypertension, arrhythmias and congestive heart failure in human), as well as diabetes mellitus, gastrointestinal (GI) tract disease, liver cirrhosis and diseases of the thyroid and parathyroid glands. Insufficient dietary intake of magnesium may also significantly affect the development and exacerbation ofADHD (Attention Deficit- Hyperactivity Disorder) symptoms in children. The known links between magnesium and carcinogenesis still remain unclear and complex, with conflicting results being reported from many experimental, epidemiological and clinical studies; further knowledge is thus required. Mg2+ ions are enzyme cofactors involved in DNA repair mechanisms that maintain genomic stability and fidelity. Any magnesium deficiencies could thereby cause a dysfunction of these systems to occur leading to DNA mutations. Magnesium deficiency may also be associated with inflammation and increased levels of free radicals where both inflammatory mediators and free radicals so arising could cause oxidative DNA damage and therefore tumour formation. The presented review article now provides a summary

  8. Intravenous magnesium sulfate does not increase ventricular CSF ionized magnesium concentration of patients with intracranial hypertension.

    PubMed

    Brewer, R P; Parra, A; Borel, C O; Hopkins, M B; Reynolds, J D

    2001-01-01

    Magnesium sulfate has attracted interest as a potential neuroprotectant but passage of magnesium ion into the central nervous system has not been well documented. For this study, we quantified plasma and cerebrospinal fluid (CSF) ionized magnesium concentration after systemic magnesium sulfate infusion in patients with intracranial hypertension. Patients ( N = 9) received an intravenous infusion of 5 g/20 mmol magnesium sulfate (125 mL of a 4% wt/vol solution) over 30 minutes. Before and after dosing, CSF (from an indwelling ventricular catheter) and blood samples were collected at hourly intervals. Ionized magnesium concentration in all samples was determined using an electrolyte analyzer. Baseline plasma and CSF ionized magnesium concentrations were 0.58 +/- 0.05 and 0.82 +/- 0.06 mmol/L, respectively. Intravenous magnesium sulfate infusion significantly increased plasma ionized magnesium concentration (peak, 0.89 +/- 0.11 mmol/L), but CSF magnesium levels did not change during the 4-hour study. Systemic administration of magnesium sulfate failed to increase CSF ionized magnesium concentration in patients with intracranial hypertension despite increasing plasma magnesium levels by >50%.

  9. 75 FR 20817 - Magnesium Metal from the People's Republic of China: Preliminary Results of the 2008-2009...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-21

    ... FR 76336 (December 16, 2008); and Frontseating Service Valves From the People's Republic of China... Duty Investigation of Pure Magnesium from the Russian Federation, 60 FR 25691 (May 12, 1995). \\2\\ See... Administrative Review, 74 FR 14771 (April 1, 2009). \\3\\ See Initiation of Antidumping and Countervailing...

  10. 75 FR 65450 - Magnesium Metal From the People's Republic of China: Final Results of the 2008-2009 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-25

    ... China: Preliminary Results of the 2008-2009 Administrative Review of the Antidumping Duty Order, 75 FR...; Extension of Time for the Final Results of the Antidumping Duty Administrative Review, 75 FR 50992 (August... Federation, 60 FR 25691 (May 12, 1995); and Antidumping Duty Order: Pure Magnesium in Granular Form from...

  11. Method for magnesium sulfate recovery

    DOEpatents

    Gay, R.L.; Grantham, L.F.

    1987-08-25

    A method is described for obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7,000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1,000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

  12. Method for magnesium sulfate recovery

    DOEpatents

    Gay, Richard L.; Grantham, LeRoy F.

    1987-01-01

    A method of obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

  13. Method for removing magnesium from aluminum-magnesium alloys with engineered scavenger compound

    SciTech Connect

    Riley, W.D.; Jong, B.W.

    1994-12-31

    The invention relates to a method for removal and production of high purity magnesium from aluminum-magnesium alloys using an engineered scanvenger compound. In particular, the invention relates to a method for removal and production of high purity magnesium from aluminum-magnesium alloys using the engineered scanvenger compound (ESC) lithium titanate (Li2O3TiO2). The removal of magnesium from the aluminum-magnesium alloys is performed at about 600-750 C in a molten salt bath of KCl or KCl-MgCl2 using lithium titanate (Li2O3TiO2) as the engineered scavenger compound (ESC). Electrode deposition of magnesium from the loaded ESC onto a stainless steel electrode is accomplished in a second step, and provides a clean magnesium electrode deposit for recycling. The second step also prepares the ESC for reuse.

  14. Substrate and method for the formation of continuous magnesium diboride and doped magnesium diboride wire

    DOEpatents

    Suplinskas, Raymond J.; Finnemore, Douglas; Bud'ko, Serquei; Canfield, Paul

    2007-11-13

    A chemically doped boron coating is applied by chemical vapor deposition to a silicon carbide fiber and the coated fiber then is exposed to magnesium vapor to convert the doped boron to doped magnesium diboride and a resultant superconductor.

  15. Lightweight Heat Pipes Made from Magnesium

    NASA Technical Reports Server (NTRS)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  16. IMPROVED MAGNESIUM OXIDE SLIP CASTING METHOD

    DOEpatents

    Stoddard, S.D.; Nuckolls, D.E.

    1963-12-31

    A process for making an aqueous magnesium oxide slip casting slurry comprising the steps of mixing finely ground fused magnesium oxide with water, milling the slurry for at least 30 hours at a temperature of 2-10 deg C (the low temperature during milling inhibiting the formation of hydrated magnesium oxide), discharging the slurry from the mill, adding hydrochloric acid as a deflocculent, and adding a scum inhibitor is presented. (AEC)

  17. Magnesium: a versatile drug for anesthesiologists.

    PubMed

    Do, Sang-Hwan

    2013-07-01

    Magnesium sulfate has been used in preeclampsia patients in order to prevent seizure. It is also used for the treatment of arrhythmia and asthma and as an anesthetic adjunct in patients undergoing surgery for pheochromocytoma. However, its potentiating effects on perioperative analgesia and muscle relaxation have drawn attention recently. These characteristics of magnesium (anesthetic- and analgesic-sparing effect) enable anesthesiologists to reduce the use of anesthetics during surgery and the use of analgesics after surgery. Magnesium sulfate has a high therapeutic index and cost-effectiveness. Considering these diverse characteristics useful for anesthesia, appropriate use of magnesium sulfate would improve surgical outcome and patients' satisfaction. PMID:23904932

  18. Use of magnesium in traumatic brain injury.

    PubMed

    Sen, Ananda P; Gulati, Anil

    2010-01-01

    Depletion of magnesium is observed in animal brain and in human blood after brain injury. Treatment with magnesium attenuates the pathological and behavioral changes in rats with brain injury; however, the therapeutic effect of magnesium has not been consistently observed in humans with traumatic brain injury (TBI). Secondary brain insults are observed in patients with brain injury, which adversely affect clinical outcome. Systemic administration studies in rats have shown that magnesium enters the brain; however, inducing hypermagnesemia in humans did not concomitantly increase magnesium levels in the CSF. We hypothesize that the neuroprotective effects of magnesium in TBI patients could be observed by increasing its brain bioavailability with mannitol. Here, we review the role of magnesium in brain injury, preclinical studies in brain injury, clinical safety and efficacy studies in TBI patients, brain bioavailability studies in rat, and pharmacokinetic studies in humans with brain injury. Neurodegeneration after brain injury involves multiple biochemical pathways. Treatment with a single agent has often resulted in poor efficacy at a safe dose or toxicity at a therapeutic dose. A successful neuroprotective therapy needs to be aimed at homeostatic control of these pathways with multiple agents. Other pharmacological agents, such as dexanabinol and progesterone, and physiological interventions, with hypothermia and hyperoxia, have been studied for the treatment of brain injury. Treatment with magnesium and hypothermia has shown favorable outcome in rats with cerebral ischemia. We conclude that coadministration of magnesium and mannitol with pharmacological and physiological agents could be an effective neuroprotective regimen for the treatment of TBI. PMID:20129501

  19. Magnesium influence on nicotine pharmacodependence and smoking.

    PubMed

    Nechifor, Mihai; Chelarescu, Dan; Mândreci, Ioan; Cartas, Nicoleta

    2004-09-01

    We followed the magnesium effect (Magne B(6)R, Sanofi-Synthelabo) with internal administration in 53 adult neurotic smoking patients (more than 10 cigarettes/day) of both genders admitted into psychiatric hospital. The nicotine dependence was assessed by the Fagerstrom test, initially and after 28 days of magnesium intake. Plasmatic magnesium level was determined before any therapy and at 28 days. All patients received benzodiazepines during the trial. Our data show that patients that received magnesium therapy showed a significant decrease in the number of cigarettes smoked and Fagerstrom test after 4 weeks [Fagerstrom score 7.93 +/- 0.17 before magnesium therapy versus 6.78 +/- 0.18 (P < 0.05) after 28 days of magnesium therapy]. In the group of smokers who did not receive magnesium, the Fagerstrom score did not change significantly [Fagerstrom score 7.48 +/- 0.22 initial versus 7.24 +/- 0.19 after 28 days]. Magnesium supplementation raised plasmatic levels (17.2 +/- 1.2 mg/L before versus 26.1 +/- 1.6 mg/L after 28 days of magnesium intake, P < 0.01). The results suggest that this cation might be a useful adjuvant in treatment of nicotine pharmacodependence.

  20. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  1. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  2. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  3. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  4. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  5. "Pure" cutaneous histiocytosis-X.

    PubMed

    Wolfson, S L; Botero, F; Hurwitz, S; Pearson, H A

    1981-11-15

    The case histories of two young children who experienced skin rashes involving various areas of the body are reported. The diagnosis of pure cutaneous histiocytosis-X was established after extensive studies revealed no other organ involvement. The patients were treated with oral corticosteroids. Currently, both children are in good health, show no evidence of disease, and have been followed over a four-to-five-year period. Therapy with corticosteroids may not be indicated with pure cutaneous histiocytosis-X unless there is evidence of extracutaneous dissemination or rapid progression of the disease.

  6. Inverse Slip Accompanying Twinning and Detwinning during Cyclic Loading of Magnesium Single Crystal

    DOE PAGES

    Yu, Qin; Wang, Jian; Jiang, Yanyao

    2013-01-01

    In situ , observation of twinning and detwinning in magnesium single crystals during tension-compression cyclic loading was made using optical microscopy. A quantitative analysis of plastic strain indicates that twinning and detwinning experience two stages, low and high work hardening de-twinning, and pure re-twinning and fresh twinning combined with retwinning. Slip is always activated. For the first time, inverse slip accompanying with pure retwinning and high work hardening detwinning was experimentally identified, which provides insights in better understanding of the activity of twining, detwinning, and slips.

  7. Production of substantially pure fructose

    DOEpatents

    Hatcher, Herbert J.; Gallian, John J.; Leeper, Stephen A.

    1990-01-01

    A process is disclosed for the production of substantially pure fructose from sucrose-containing substrates. The process comprises converting the sucrose to levan and glucose, purifying the levan by membrane technology, hydrolyzing the levan to form fructose monomers, and recovering the fructose.

  8. The TMS Magnesium Committee: Committed to the Advancement of Global Magnesium Technology

    SciTech Connect

    Sillekens, Wim H.; Nyberg, Eric A.

    2011-04-21

    The TMS Magnesium Committee was established in the year 2000 as a spin-off of the Reactive Metals Committee, triggered by the strong global growth of magnesium being used in a variety of structural lightweight applications since the mid-1990’s. Since then the committee has seen a distinct development in terms of size, participation and focus. The article at hand outlines this development by recapitulating the output of its two main activities: the annual Magnesium Technology Symposia and the JOM Special Issues dedicated to magnesium research and development. Further records on the Magnesium Committee are available from the committee homepage (accessible through http://members.tms.org).

  9. Iatrogenic magnesium toxicity following intravenous infusion of magnesium sulfate: risks and strategies for prevention.

    PubMed

    Cavell, Gillian F; Bryant, Catherine; Jheeta, Seetal

    2015-07-31

    A 65-year-old man being treated with radiotherapy and chemotherapy for recurrent colonic adenocarcinoma was admitted for management of hypokalaemia and hypomagnesaemia secondary to diarrhoea. He was treated with intravenous infusions of potassium chloride and magnesium sulfate. Following an infusion of magnesium sulfate, he experienced a sudden neurological deterioration. A CT of the head revealed no haemorrhage or evidence of acute ischaemic injury. Results of serum biochemistry later that day revealed an elevated magnesium level. Iatrogenic magnesium toxicity was suspected. Further discussions between the pharmacist and ward staff confirmed that a medication error had been made in the preparation of the infusion resulting in an overdose of intravenous magnesium.

  10. Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium

    SciTech Connect

    Mola, Renata

    2013-04-15

    Al/Zn-enriched surface layers were fabricated by heating Mg specimens in contact with Al–Zn powder mixtures in a vacuum furnace at 445 °C. The layer formation process took place through partial melting at the Mg-substrate/powder-mixture interface. Heating times ranged from 20 to 80 min. The layer microstructure and composition were analyzed by optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The layers were 100–900 μm in thickness, depending on the treatment time. The examination results revealed that the layers consisted of Mg{sub 17}(Al,Zn){sub 12} and Mg{sub 5}Al{sub 2}Zn{sub 2} intermetallic phases and a solid solution of Al and Zn in Mg. Between the Al/Zn-enriched layer and the Mg substrate, there was a transition zone of a solid solution of Al and Zn in Mg with a thickness of 20–30 μm. The layers had much higher microhardness than the Mg substrate. - Highlights: ► The layers were produced by heating Mg in contact with an Al–Zn powder mixture. ► The layer formation process at 445 °C proceeded with the liquid phase contribution. ► The Al/Zn-enriched layers were thick, dense, uniform and continuous. ► The layers contained Mg–Al–Zn intermetallic phases. ► The hardness of the layers was much higher than that of the Mg substrate.

  11. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Anticaking Agents § 182.2437 Magnesium silicate. (a) Product....

  12. Nanostructured magnesium increases bone cell density

    NASA Astrophysics Data System (ADS)

    Weng, Lucy; Webster, Thomas J.

    2012-12-01

    Magnesium has attracted some attention in orthopedics due to its biodegradability and mechanical properties. Since magnesium is an essential natural mineral for bone growth, it can be expected that as a biomaterial, it would support bone formation. However, upon degradation in the body, magnesium releases OH- which results in an alkaline pH that can be detrimental to cell density (for example, osteoblasts or bone forming cells). For this reason, modification of magnesium may be necessary to compensate for such detrimental effects to cells. This study created biologically inspired nanoscale surface features on magnesium by soaking magnesium in various concentrations of NaOH (from 1 to 10 N) and for various periods of time (from 10 to 30 min). The results provided the first evidence of increased roughness, surface energy, and consequently greater osteoblast adhesion, after 4 h as well as density up to 7 days on magnesium treated with any concentration of NaOH for any length of time compared to untreated controls. For these reasons, this study suggests that soaking magnesium in NaOH could be an inexpensive, simple and effective manner to promote osteoblast functions for numerous orthopedic applications and, thus, should be further studied.

  13. Imparting passivity to vapor deposited magnesium alloys

    NASA Astrophysics Data System (ADS)

    Wolfe, Ryan C.

    Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

  14. Imparting passivity to vapor deposited magnesium alloys

    NASA Astrophysics Data System (ADS)

    Wolfe, Ryan C.

    Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

  15. Analysis Methods of Magnesium Chips

    NASA Astrophysics Data System (ADS)

    Ohmann, Sven; Ditze, André; Scharf, Christiane

    2015-11-01

    The quality of recycled magnesium from chips depends strongly on their exposure to inorganic and organic impurities that are added during the production processes. Different kinds of magnesium chips from these processes were analyzed by several methods. In addition, the accuracy and effectiveness of the methods are discussed. The results show that the chips belong either to the AZ91, AZ31, AM50/60, or AJ62 alloy. Some kinds of chips show deviations from the above-mentioned normations. Different impurities result mainly from transition metals and lime. The water and oil content does not exceed 25%, and the chip size is not more than 4 mm in the diameter. The sieve analysis shows good results for oily and wet chips. The determination of oil and water shows better results for the application of a Soxhlet compared with the addition of lime and vacuum distillation. The most accurate values for the determination of water and oil are obtained by drying at 110°C (for water) and washing with acetone (for oil) by hand.

  16. Tape casting of magnesium oxide.

    SciTech Connect

    Ayala, Alicia; Corral, Erica L.; Loehman, Ronald E.; Bencoe, Denise Nora; Reiterer, Markus; Shah, Raja A.

    2008-02-01

    A tape casting procedure for fabricating ceramic magnesium oxide tapes has been developed as a method to produce flat sheets of sintered MgO that are thin and porous. Thickness of single layer tapes is in the range of 200-400 {micro}m with corresponding surface roughness values in the range of 10-20 {micro}m as measured by laser profilometry. Development of the tape casting technique required optimization of pretreatment for the starting magnesium oxide (MgO) powder as well as a detailed study of the casting slurry preparation and subsequent heat treatments for sintering and final tape flattening. Milling time of the ceramic powder, plasticizer, and binder mixture was identified as a primary factor affecting surface morphology of the tapes. In general, longer milling times resulted in green tapes with a noticeably smoother surface. This work demonstrates that meticulous control of the entire tape casting operation is necessary to obtain high-quality MgO tapes.

  17. Canonical Thermal Pure Quantum State

    NASA Astrophysics Data System (ADS)

    Sugiura, Sho; Shimizu, Akira

    2013-07-01

    A thermal equilibrium state of a quantum many-body system can be represented by a typical pure state, which we call a thermal pure quantum (TPQ) state. We construct the canonical TPQ state, which corresponds to the canonical ensemble of the conventional statistical mechanics. It is related to the microcanonical TPQ state, which corresponds to the microcanonical ensemble, by simple analytic transformations. Both TPQ states give identical thermodynamic results, if both ensembles do, in the thermodynamic limit. The TPQ states corresponding to other ensembles can also be constructed. We have thus established the TPQ formulation of statistical mechanics, according to which all quantities of statistical-mechanical interest are obtained from a single realization of any TPQ state. We also show that it has great advantages in practical applications. As an illustration, we study the spin-1/2 kagome Heisenberg antiferromagnet.

  18. Development of hierarchical magnesium composites using hybrid microwave sintering.

    PubMed

    Habibi, Meisam Kouhi; Joshi, Shailendra P; Gupta, Manoj

    2011-01-01

    In this work, hierarchical magnesium based composites with a micro-architecture comprising reinforcing constituent that is a composite in itself were fabricated using powder metallurgy route including microwave assisted rapid sintering technique and hot extrusion. Different level-I composite particles comprises sub-micron pure aluminum (Al) matrix containing Al2O3 particles of different length scale (from micrometer to nanometer size). Microstructural characterization of the hierarchical composites revealed reasonably uniform distribution of level-I composite particles and significant grain refinement compared to monolithic Mg. Hierarchical composite configurations exhibited different mechanical performance as a function of Al2O3 length scale. Among the different hierarchical formulations synthesized, the hierarchical configuration with level-I composition comprising Al and nano-Al2O3 (0.05 microm) exhibited the highest improvement in tensile yield strength (0.2% YS), ultimate tensile strength (UTS), tensile failure strain (FS), compressive yield strength (0.2% CYS) and ultimate compressive strength (UCS) (+96%, +80%, +42%, +80%, and +83%) as compared to monolithic Mg. An attempt has been made in the present study to correlate the effect of different length scales of Al2O3 particulates on the microstructural and mechanical response of magnesium. PMID:24427874

  19. Synthesis and optical study of barium magnesium aluminate blue phosphors

    SciTech Connect

    Jeet, Suninder Pandey, O. P.; Sharma, Manoj

    2015-05-15

    Europium doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl{sub 10}O{sub 17}(JCPDS 26-0163) along with an additional phase BaAl{sub 2}O{sub 4}(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f{sup 6} 5d → 4f{sup 7} transition of Eu{sup 2+} which lies in the blue region of the visible spectrum.

  20. Magnesium: its role in nutrition and carcinogenesis.

    PubMed

    Blaszczyk, Urszula; Duda-Chodak, Aleksandra

    2013-01-01

    Magnesium (Mg2+) plays a key role in many essential cellular processes such as intermediary metabolism, DNA replication and repair, transporting potassium and calcium ions, cell proliferation together with signalling transduction. Dietary sources rich in magnesium are whole and unrefined grains, seeds, cocoa, nuts, almonds and green leafy vegetables. Hard water is also considered to be an important source of magnesium beneficial to human health. The daily dietary intake of magnesium is however frequently found to be below that recommended in Western countries. Indeed, it is recognised that magnesium deficiency may lead to many disorders of the human body, where for instance magnesium depletion is believed to play an important role in the aetiology of the following; cardiovascular disease (including thrombosis, atherosclerosis, ishaemic heart disease, myocardial infarction, hypertension, arrhythmias and congestive heart failure in human), as well as diabetes mellitus, gastrointestinal (GI) tract disease, liver cirrhosis and diseases of the thyroid and parathyroid glands. Insufficient dietary intake of magnesium may also significantly affect the development and exacerbation ofADHD (Attention Deficit- Hyperactivity Disorder) symptoms in children. The known links between magnesium and carcinogenesis still remain unclear and complex, with conflicting results being reported from many experimental, epidemiological and clinical studies; further knowledge is thus required. Mg2+ ions are enzyme cofactors involved in DNA repair mechanisms that maintain genomic stability and fidelity. Any magnesium deficiencies could thereby cause a dysfunction of these systems to occur leading to DNA mutations. Magnesium deficiency may also be associated with inflammation and increased levels of free radicals where both inflammatory mediators and free radicals so arising could cause oxidative DNA damage and therefore tumour formation. The presented review article now provides a summary

  1. Isospin Mixing in MAGNESIUM-24.

    NASA Astrophysics Data System (ADS)

    Hoyle, Charles David

    The (beta)-(gamma) circular polarization correlation asymmetry was measured for the pure Gamow-Teller decay of ('28)Al, for the pure Fermi decay of ('14)O and for the mixed decay of the ('24)Al 4('+) ground state to the 8.437 MeV, 4('+) state in ('24)Mg. The expected results were obtained for the pure Gamow-Teller and Fermi decays. From the results of the ('24)Al decay the isospin mixing of the 8.437 MeV, 4('+) state and the 9.515 MeV, 4('+) analog state in ('24)Mg was determined. The charge dependent matrix element mixing these two states was determined to be -95 (+OR-) 36 keV. This is the largest charge dependent matrix element observed in (beta) decay to date. This large value has not been completely explained and suggests the existence of a (DELTA)T = 1 nuclear force.

  2. Magnesium absorption in mature ewes infused intrarumenally with magnesium chloride.

    PubMed

    McLean, A F; Buchan, W; Scott, D

    1984-11-01

    The effects of magnesium supplementation on Mg absorption proximal and distal to the pylorus in ewes maintained on a grass diet were investigated using a combination of balance, digesta flow and electropotential measurements. Three mature ewes each received by intrarumenal infusion a supplement of 0, 1, 2 and 3 g Mg/d in sequence over four 10-d periods. Net Mg absorption distal to the pylorus took place down its electrochemical gradient, although the quantity absorbed remained small during the control and first infusion periods. The bulk of Mg absorption occurred before the pylorus and, during the control and first infusion periods, took place against its electrochemical gradient. The net Mg absorption proximal to the pylorus rose with declining efficiency as Mg intake was increased. It is suggested that saturation of the absorption process at this site was occurring.

  3. Intestinal absorption of magnesium from food and supplements.

    PubMed Central

    Fine, K D; Santa Ana, C A; Porter, J L; Fordtran, J S

    1991-01-01

    The purpose of this study was to measure magnesium absorption over the wide range of intakes to which the intestine may be exposed from food and/or magnesium-containing medications. Net magnesium absorption was measured in normal subjects after they ingested a standard meal supplemented with 0, 10, 20, 40, and 80 mEq of magnesium acetate. Although absorption increased with each increment in intake, fractional magnesium absorption fell progressively (from 65% at the lowest to 11% at the highest intake) so that absorption as a function of intake was curvilinear. This absorption-intake relationship was almost perfectly represented by an equation containing a hyperbolic function plus a linear function. Our results are statistically compatible with a magnesium absorption process that simultaneously uses a mechanism that reaches an absorptive maximum, plus a mechanism that endlessly absorbs a defined fraction (7%) of ingested magnesium. Compared to previous studies of calcium absorption, much less magnesium that calcium was absorbed at intakes above 8 mEq/meal, apparently due to greater restriction of intestinal permeability to magnesium. We also found that magnesium from a high magnesium-containing food source, almonds, was just as bioavailable as from soluble magnesium acetate. In contrast, magnesium absorption from commercially available enteric-coated magnesium chloride was much less than from magnesium acetate, suggesting that enteric coating can impair magnesium bioavailability. PMID:1864954

  4. Magnesium bicarbonate as an in situ uranium lixiviant

    SciTech Connect

    Sibert, J.W.

    1984-09-25

    In the subsurface solution mining of mineral values, especially uranium, in situ, magnesium bicarbonate leaching solution is used instead of sodium, potassium and ammonium carbonate and bicarbonates. The magnesium bicarbonate solution is formed by combining carbon dioxide with magnesium oxide and water. The magnesium bicarbonate lixivant has four major advantages over prior art sodium, potassium and ammonium bicarbonates.

  5. Monitoring Biodegradation of Magnesium Implants with Sensors

    NASA Astrophysics Data System (ADS)

    Zhao, Daoli; Wang, Tingting; Guo, Xuefei; Kuhlmann, Julia; Doepke, Amos; Dong, Zhongyun; Shanov, Vesselin N.; Heineman, William R.

    2016-04-01

    Magnesium and its alloys exhibit properties such as high strength, light weight, and in vivo corrosion that make them promising candidates for the development of biodegradable metallic implant materials for bone repair, stents and other medical applications. Sensors have been used to monitor the corrosion of magnesium and its alloys by measuring the concentrations of the following corrosion products: magnesium ions, hydroxyl ions and hydrogen gas. The corrosion characterization system with home-made capillary pH and Mg2+ microsensors has been developed for real-time detection of magnesium corrosion in vitro. A hydrogen gas sensor was used to monitor the corrosion of magnesium by measuring the concentration of the hydrogen gas reaction product in vivo. The high permeability of hydrogen through skin allows transdermal monitoring of the biodegradation of a magnesium alloy implanted beneath the skin by detecting hydrogen gas at the skin surface. The sensor was used to map hydrogen concentration in the vicinity of an implanted magnesium alloy.

  6. Computational micromechanics of bioabsorbable magnesium stents.

    PubMed

    Grogan, J A; Leen, S B; McHugh, P E

    2014-06-01

    Magnesium alloys are a promising candidate material for an emerging generation of absorbable metal stents. Due to its hexagonal-close-packed lattice structure and tendency to undergo twinning, the deformation behaviour of magnesium is quite different to that of conventional stent materials, such as stainless steel 316L and cobalt chromium L605. In particular, magnesium exhibits asymmetric plastic behaviour (i.e. different yield behaviours in tension and compression) and has lower ductility than these conventional alloys. In the on-going development of absorbable metal stents it is important to assess how the unique behaviour of magnesium affects device performance. The mechanical behaviour of magnesium stent struts is investigated in this study using computational micromechanics, based on finite element analysis and crystal plasticity theory. The plastic deformation in tension and bending of textured and non-textured magnesium stent struts with different numbers of grains through the strut dimension is investigated. It is predicted that, unlike 316L and L605, the failure risk and load bearing capacity of magnesium stent struts during expansion is not strongly affected by the number of grains across the strut dimensions; however texturing, which may be introduced and controlled in the manufacturing process, is predicted to have a significant influence on these measures of strut performance.

  7. Magnesium and disturbances in carbohydrate metabolism.

    PubMed

    Mooren, Frank C

    2015-09-01

    Magnesium is actively involved in a number of metabolic reactions as an important co-factor, with special emphasis on carbohydrate metabolism. After a brief overview of the regulation of intra- and extracellular magnesium, the present review first describes the regulatory role of magnesium in important metabolic pathways involved in energy metabolism and glycaemic control. Next the clinical significance of hypomagnesaemic conditions with regard to the management of glucose in prediabetic stages, such as insulin resistance/impaired glucose tolerance and in type 2 diabetes mellitus are characterized. Cross-sectional as well as longitudinal studies suggest that a reduced dietary magnesium intake serves as a risk factor for the incidence of both impaired glucose regulation and type 2 diabetes. Mechanisms that might be responsible for diabetes-associated hypomagnesaemia are discussed. Furthermore, the role of hypomagnesaemia in the development and progression of chronic diabetic complications are addressed. Finally, the available literature on the effects of magnesium supplementation on glycaemic control parameters during prediabetic conditions (preventive approach) as well as type 2 diabetes mellitus (therapeutic approach) are reviewed systematically. There is considerable evidence that chronic magnesium supplementation may delay the progression from impaired glucose regulation to type 2 diabetes; however, the effects of oral magnesium supplementation as an adjunct therapy for type 2 diabetes are quite heterogeneous with respect to the various measures of glycaemic control. The results of this review suggest a requirement for critical consideration of the pros and cons of magnesium replacement therapy, based on variables such as magnesium status, stage of disease and glycaemic control.

  8. Magnesium doping of boron nitride nanotubes

    DOEpatents

    Legg, Robert; Jordan, Kevin

    2015-06-16

    A method to fabricate boron nitride nanotubes incorporating magnesium diboride in their structure. In a first embodiment, magnesium wire is introduced into a reaction feed bundle during a BNNT fabrication process. In a second embodiment, magnesium in powder form is mixed into a nitrogen gas flow during the BNNT fabrication process. MgB.sub.2 yarn may be used for superconducting applications and, in that capacity, has considerably less susceptibility to stress and has considerably better thermal conductivity than these conventional materials when compared to both conventional low and high temperature superconducting materials.

  9. Synthesis of Enantiomerically Pure Anthracyclinones

    NASA Astrophysics Data System (ADS)

    Achmatowicz, Osman; Szechner, Barbara

    The anthracycline antibiotics are among the most important clinical drugs used in the treatment of human cancer. The search for new agents with improved therapeutic efficacy and reduced cardiotoxicity stimulated considerable efforts in the synthesis of new analogues. Since the biological activity of anthracyclines depends on their natural absolute configuration, various strategies for the synthesis of enantiomerically pure anthracyclinones (aglycones) have been developed. They comprise: resolution of racemic intermediate, incorporation of a chiral fragment derived from natural and non-natural chiral pools, asymmetric synthesis with the use of a chiral auxiliary or a chiral reagent, and enantioselective catalysis. Synthetic advances towards enantiopure anthracyclinones reported over the last 17 years are reviewed.

  10. Production of substantially pure fructose

    SciTech Connect

    Hatcher, H.J.; Gallian, J.J.; Leeper, S.A.

    1990-05-22

    This patent describes a process for the production of a substantially pure product containing greater than 60% fructose. It comprises: combining a sucrose-containing substrate with effective amounts of a levansucrase enzyme preparation to form levan and glucose; purifying the levan by at least one of the following purification methods: ultrafiltration, diafiltration, hyperfiltration, reverse osmosis, liquid--liquid partition, solvent extraction, chromatography, and precipitation; hydrolyzing the levan to form fructose substantially free of glucose and sucrose; and recovering the fructose by at least one of the following recovery methods: hyperfiltration, reverse osmosis, evaporation, drying, crystallization, and chromatography.

  11. Inhaled magnesium fluoride reverse bronchospasma.

    PubMed

    Gandia, Fedoua; Rouatbi, Sonia; Latiri, Imed; Guénard, Hervé; Tabka, Zouhair

    2010-01-01

    Asthma is a global health problem. Asthma attacks are becoming more severe and more resistant to usual treatment by beta(2) agonists nebulisation. The search for a new product that could reduce the morbidity of asthmatic disease seems necessary. The objective of this study was to compare the effectiveness of inhaled magnesium fluoride (MgF(2)) with that of magnesium sulphate (MgSO(4)) 15% alone and sodium fluoride (NaF) 0.5 M alone in rats pre-contracted by methacholine (MeCh). Fifty six adult male Wistar rats of medium weight 259 +/- 15 g were divided randomly into five groups. They inhaled respectively: MeCh, MgF(2) + NaCl 0.9%, MgF(2) + acetic acid, MgSO(4) 15% single and NaF (0.5 M) single. Airway resistances were measured after each dose of MeCh by pneumomultitest equipment. Results indicated that (1) MgF(2) + NaCl 0.9%, MgF(2) + acetic acid and MgSO(4) reversed significantly the methacholine-induced bronchial constriction in rats and had a bronchodilating effect at the moment of its administration (2) MgF(2) + acetic acid led to a greater decrease (P<0.05) of bronchial resistances when compared to that obtained from MgF(2) + NaCl 0.9%, NaF exclusively and MgSO(4) alone (3) inhaled NaF alone led to a significant bronchorelaxing effect (P<0.05) that starts at the sixth dose of MeCh (17 mg/L). As a matter of fact, MgF(2) dissolved in acetic acid and delivered in aerosol form reduces significantly bronchial spasm. In conclusion, MgF(2) can be used as a bronchodilator for diseases with bronchospasma such as asthma and chronic obstructive pulmonary disease (COPD).

  12. Thermodynamic properties of calcium-magnesium alloys determined by emf measurements

    SciTech Connect

    Newhouse, JM; Poizeau, S; Kim, H; Spatocco, BL; Sadoway, DR

    2013-02-28

    The thermodynamic properties of calcium-magnesium alloys were determined by electromotive force (emf) measurements using a Ca(in Bi)vertical bar CaF2 vertical bar Ca(in Mg) cell over the temperature range 713-1048 K. The activity and partial molar Gibbs free energy of calcium in magnesium were calculated for nine Ca-Mg alloys, calcium mole fractions varying from x(ca) = 0.01 to 0.80. Thermodynamic properties of magnesium in calcium and the molar Gibbs free energy of mixing were estimated using the Gibbs-Duhem relationship. In the all-liquid region at 1010 K, the activity of calcium in magnesium was found to range between 8.8 x 10(-4) and 0.94 versus pure calcium. The molecular interaction volume model (MIVM) was used to model the activity coefficient of Ca and Mg in Ca-Mg liquid alloys. Based on this work, Ca-Mg alloys show promise as the negative electrode of a liquid metal battery in which calcium is the itinerant species: alloying with Mg results in both a decrease in operating temperature and suppression of Ca metal solubility in the molten salt electrolyte. (C) 2012 Elsevier Ltd. All rights reserved.

  13. Corrosion resistance of aluminum-magnesium alloys in glacial acetic acid

    SciTech Connect

    Zaitseva, L.V.; Romaniv, V.I.

    1984-05-01

    Vessels for the storage and conveyance of glacial acetic acid are produced from ADO and AD1 aluminum, which are distinguished by corrosion resistance, weldability and workability in the hot and cold conditions but have low tensile strength. Aluminum-magnesium alloys are stronger materials close in corrosion resistance to technical purity aluminum. An investigation was made of the basic alloying components on the corrosion resistance of these alloys in glacial acetic acid. Both the base metal and the weld joints were tested. With an increase in temperature the corrosion rate of all of the tested materials increases by tens of times. The metals with higher magnesium content show more pitting damage. The relationship of the corrosion resistance of the alloys to magnesium content is confirmed by the similar intensity of failure of the joint metal of all of the investigated alloys and by electrochemical investigations. The data shows that AMg3 alloy is close to technically pure ADO aluminum. However, the susceptibility of even this material to local corrosion eliminates the possibility of the use of aluminum-magnesium alloys as reliable constructional materials in glacial acetic acid.

  14. Anisotropy and Asymmetry of Yield in Magnesium Alloys at Room Temperature

    NASA Astrophysics Data System (ADS)

    Robson, Joseph

    2014-10-01

    Mechanical anisotropy and asymmetry are often pronounced in wrought magnesium alloys and are detrimental to formability and service performance. Single crystals of magnesium are highly anisotropic due to the large difference in critical resolved shear stress between the softest and hardest deformation modes. Polycrystalline magnesium alloys exhibit lower anisotropy, influenced by texture, solute level, and precipitates. In this work, a fundamental study of the effects of alloying, precipitate formation, and texture on the change in anisotropy and asymmetry from the pure magnesium single crystal case to polycrystalline alloys has been performed. It is demonstrated that much of the reduction in anisotropy and asymmetry arises from overall strengthening as solute, precipitates, and grain boundary effects are accounted for. Precipitates are predicted to be more effective than solute in reducing anisotropy and asymmetry, but shape and habit are critical since precipitates produce highly anisotropic strengthening. A small deviation from an ideal basal texture (15 deg spread) has a very strong effect in reducing anisotropy and asymmetry, similar in magnitude to the maximum effect produced by precipitation. Elasto-plastic modeling suggests that this is due to a contribution from basal slip to initial plastic deformation, even when global yield is not controlled by this mode.

  15. Characteristics of aluminum and magnesium based nanocomposites processed using hybrid microwave sintering.

    PubMed

    Eugene, Wong Wai Leong; Gupta, Manoj

    2010-01-01

    Powder metallurgy is one of the highly established methods to synthesize metals, alloys and composites. Sintering is one of the important steps in powder metallurgy methodology and is usually realized through conventional resistance furnaces. The sintering usually takes a few hours to realize density in excess of 90%. The present study highlights the use of energy efficient and environment friendly microwave sintering route to synthesize pure aluminum, magnesium and magnesium based nanocomposites. Three reinforcements were targeted: a) silicon carbide, a microwave susceptor, b) alumina, a microwave transparent material and c) copper, a conducting material. Composites were prepared using blend - compact - microwave sintering - extrusion methodology. Process evaluation revealed that microwave assisted sintering can lead to a reduction of 86% in sintering time and energy savings of 96% when compared to conventional sintering. Moreover, microwave assisted sintering of metal compacts in this study was carried out in air, in the absence of any protective atmosphere, without compromising the mechanical properties of the materials. Results revealed that properties of magnesium can be convincingly enhanced using the said processing methodology and the materials formulations selected. Most importantly, the study established the viability of microwave sintering approach used in place of conventional sintering for magnesium based formulations. PMID:21721326

  16. Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial.

    PubMed

    Zhang, Erlin; Chen, Haiyan; Shen, Feng

    2010-07-01

    Biocorrosion properties and blood- and cell compatibility of pure iron were studied in comparison with 316L stainless steel and Mg-Mn-Zn magnesium alloy to reveal the possibility of pure iron as a biodegradable biomaterial. Both electrochemical and weight loss tests showed that pure iron showed a relatively high corrosion rate at the first several days and then decreased to a low level during the following immersion due to the formation of phosphates on the surface. However, the corrosion of pure iron did not cause significant increase in pH value to the solution. In comparison with 316L and Mg-Mn-Zn alloy, the pure iron exhibited biodegradable property in a moderate corrosion rate. Pure iron possessed similar dynamic blood clotting time, prothrombin time and plasma recalcification time to 316L and Mg-Mn-Zn alloy, but a lower hemolysis ratio and a significant lower number density of adhered platelets. MTT results revealed that the extract except the one with 25% 24 h extract actually displayed toxicity to cells and the toxicity increased with the increasing of the iron ion concentration and the incubation time. It was thought there should be an iron ion concentration threshold in the effect of iron ion on the cell toxicity.

  17. LOST FOAM CASTING OF MAGNESIUM ALLOYS

    SciTech Connect

    Han, Qingyou; Dinwiddie, Ralph Barton; Sklad, Philip S; Currie, Kenneth; Abdelrahman, Mohamed; Vondra, Fred; Walford, Graham; Nolan, Dennis J

    2007-01-01

    The lost foam casting process has been successfully used for making aluminum and cast iron thin walled castings of complex geometries. Little work has been carried out on cast magnesium alloys using the lost foam process. The article describes the research activities at Oak Ridge National Laboratory and Tennessee Technological University on lost foam casting of magnesium alloys. The work was focused on castings of simple geometries such as plate castings and window castings. The plate castings were designed to investigate the mold filling characteristics of magnesium and aluminum alloys using an infrared camera. The pate castings were then characterized for porosity distribution. The window castings were made to test the castability of the alloys under lost foam conditions. Significant differences between lost foam aluminum casting and lost foam magnesium casting have been observed.

  18. Magnesium silicates adsorbents of organic compounds

    NASA Astrophysics Data System (ADS)

    Ciesielczyk, Filip; Krysztafkiewicz, Andrzej; Jesionowski, Teofil

    2007-08-01

    Studies were presented on production of highly dispersed magnesium silicate at a pilote scale. The process of silicate adsorbent production involved precipitation reaction using water glass (sodium metasilicate) solution and appropriate magnesium salt, preceded by an appropriate optimization stage. Samples of best physicochemical parameters were in addition modified (in order to introduce to silica surface of several functional groups) using the dry technique and various amounts of 3-isocyanatepropyltrimethoxysilane, 3-thiocyanatepropyltrimethoxysilane, N-phenyl-3-aminopropyltrimethoxysilane. The so prepared samples were subjected to a comprehensive physicochemical analysis. At the terminal stage of studies attempts were made to adsorb phenol from its aqueous solutions on the surface of unmodified and modified magnesium silicates. Particle size distributions were determined using the ZetaSizer Nano ZS apparatus. In order to define adsorptive properties of studied magnesium silicates isotherms of nitrogen adsorption/desorption on their surfaces were established. Efficiency of phenol adsorption was tested employing analysis of post-adsorption solution.

  19. Dietary intake of magnesium may modulate depression.

    PubMed

    Yary, Teymoor; Aazami, Sanaz; Soleimannejad, Kourosh

    2013-03-01

    Depressive symptoms are frequent in students and may lead to countless problems. Several hypotheses associate magnesium with depression because of the presence of this mineral in several enzymes, hormones, and neurotransmitters, which may play a key role in the pathological pathways of depression. The aim of this study was to assess whether magnesium intake could modulate depressive symptoms. A cross-sectional study was conducted on a convenience sample of 402 Iranian postgraduate students studying in Malaysia to assess the relationship between magnesium intake and depressive symptoms. The mean age of the participants was 32.54 ± 6.22 years. The results of the study demonstrated an inverse relationship between magnesium intake and depressive symptoms, which persisted even after adjustments for sex, age, body mass index, monthly expenses, close friends, living on campus, smoking (current and former), education, physical activity, and marital status.

  20. Magnesium is a cerebrovasodilator in newborn piglets.

    PubMed

    Kim, C R; Oh, W; Stonestreet, B S

    1997-01-01

    We tested the hypothesis that, in newborn piglets, magnesium results in a dose-dependent prostanoid-mediated cerebrovasodilation. Pial arterioles (50-200 microns in diameter) were serially measured, and cortical subarachnoid cerebrospinal fluid (CSF) was collected for radioimmunoassay of 6-ketoprostaglandin F1 alpha (6-keto-PGF1 alpha, hydrolysis product of prostacyclin) and thromboxane B2 (TxB2, metabolite of thromboxane A2) before and after CSF containing 1.2, 2.4, 4.8, and 9.6 mM MgCl2 was suffused over the parietal cortex under a closed cranial window in twelve 2- to 4-day-old piglets. Magnesium suffusion resulted (P < 0.05) in a dose-dependent pial arteriolar vasodilation. The increase in vessel diameter was greater (P < 0.001) with 2.4, 4.8, and 9.6 mM than with 1.2 mM concentration of magnesium. The increase in vessel diameter with 9.6 mM was also greater (P < 0.001) than with the 2.4 mM concentration of magnesium. Magnesium suffusion did not result in changes in cortical CSF prostanoid concentrations. The effect of intravenous indomethacin (5 mg/kg) on cyclooxygenase inhibition in the pial arterioles was confirmed by a 24 +/- 3% decrease in vessel diameter at the baseline (1.2 mM) magnesium concentration. In contrast, cyclooxygenase inhibition with intravenous indomethacin did not attenuate the magnesium-induced cerebrovasodilation. We conclude that in new born piglets magnesium suffusion over the parietal cortex results in a dose-dependent cerebrovasodilation that is most likely not mediated by prostanoids.

  1. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  2. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Specific Substances Affirmed as GRAS § 184.1428 Magnesium hydroxide. (a) Magnesium hydroxide (Mg(OH)2, CAS... Chemicals Codex, 3d Ed. (1981), p. 178, which is incorporated by reference. Copies are available from the... § 170.3(o)(20) of this chapter; a pH control agent as defined in § 170.3(o)(23) of this chapter; and...

  3. Hydrogen in magnesium palladium thin layer structures

    NASA Astrophysics Data System (ADS)

    Kruijtzer, G. L.

    2008-02-01

    In this thesis, the study of hydrogen storage, absorption and desorption in magnesium layers is described. The magnesium layers have a thickness of 50-500 nm and are covered by a palladium layer which acts as a hydrogen dissociation/association catalyst. The study was preformed under ultra high vacuum conditions to avoid oxygen contamination. The main analysis techniques were RBS, ERD and TDS.

  4. Immunological Response to Biodegradable Magnesium Implants

    NASA Astrophysics Data System (ADS)

    Pichler, Karin; Fischerauer, Stefan; Ferlic, Peter; Martinelli, Elisabeth; Brezinsek, Hans-Peter; Uggowitzer, Peter J.; Löffler, Jörg F.; Weinberg, Annelie-Martina

    2014-04-01

    The use of biodegradable magnesium implants in pediatric trauma surgery would render surgical interventions for implant removal after tissue healing unnecessary, thereby preventing stress to the children and reducing therapy costs. In this study, we report on the immunological response to biodegradable magnesium implants—as an important aspect in evaluating biocompatibility—tested in a growing rat model. The focus of this study was to investigate the response of the innate immune system to either fast or slow degrading magnesium pins, which were implanted into the femoral bones of 5-week-old rats. The main alloying element of the fast-degrading alloy (ZX50) was Zn, while it was Y in the slow-degrading implant (WZ21). Our results demonstrate that degrading magnesium implants beneficially influence the immune system, especially in the first postoperative weeks but also during tissue healing and early bone remodeling. However, rodents with WZ21 pins showed a slightly decreased phagocytic ability during bone remodeling when the degradation rate reached its maximum. This may be due to the high release rate of the rare earth-element yttrium, which is potentially toxic. From our results we conclude that magnesium implants have a beneficial effect on the innate immune system but that there are some concerns regarding the use of yttrium-alloyed magnesium implants, especially in pediatric patients.

  5. Enhancing overall tensile and compressive response of pure Mg using nano-TiB{sub 2} particulates

    SciTech Connect

    Meenashisundaram, Ganesh Kumar; Seetharaman, Sankaranarayanan; Gupta, Manoj

    2014-08-15

    A novel attempt is made to synthesize and study the isolated effects of less than two volume fraction TiB{sub 2} nanoparticulates (60 nm) on pure magnesium. New light weight Mg–TiB{sub 2} nanocomposites with superior mechanical properties compared to pure magnesium are synthesized using disintegrated melt deposition technique followed by hot extrusion. The microstructural characterization studies revealed that the samples exhibited fairly uniform distribution of TiB{sub 2} nanoparticulates with minimal porosity and good interfacial integrity between Mg matrix and TiB{sub 2} particulates. The coefficient of thermal expansion results indicates that the addition of 0.58, 0.97, and 1.98 vol.% TiB{sub 2} nanoparticulates marginally improves the dimensional stability of pure magnesium. A significant improvement in the room temperature tensile properties of pure magnesium was observed with the addition of less than two volume fraction TiB{sub 2} nanoparticulates. The synthesized Mg 1.98 vol.% TiB{sub 2} nanocomposite revealed the best room temperature tensile properties with a significant increase in the 0.2% tensile yield strength by ∼ 54%, ultimate tensile strength by ∼ 15% and fracture strain by ∼ 79% when compared to pure Mg. The X-ray diffraction studies indicated changes in the basal plane orientation of pure Mg with the addition of nano-TiB{sub 2} particulates. A maximum tensile fracture strain of ∼ 16% is achieved with the addition of 0.97 vol.% TiB{sub 2}. The room temperature compressive properties of the nanocomposites reveal that the addition of 1.98 TiB{sub 2} increases the 0.2% compressive yield strength of Mg by ∼ 47% and ultimate compressive strength by ∼ 10% with a marginal increase in the fracture strain (∼ 11%). Reduction in tensile–compression yield asymmetry was observed for Mg 0.58 and 0.97 vol.% TiB{sub 2} nanocomposites which can be attributed to the weakening of the strong basal texture of pure Mg. - Highlights: • First attempt

  6. The adenosine triphosphate inhibition of the pyruvate kinase reaction and its dependence on the total magnesium ion concentration

    PubMed Central

    Holmsen, Holm; Storm, Eva

    1969-01-01

    concentration were similar to that obtained in the presence of ATP below 6–8mm-magnesium but further increase in the magnesium concentration resulted in an increase in the rate up to a maximum comparable with that of the control. The effect of pure chelation was thus a displacement of the reaction maximum to higher magnesium concentrations without changing the maximal rate. When correction had been made for this effect, ATP gave inhibition at 44mm-magnesium that was competitive with respect to ADP (Ki 2·1×10−2m). This degree of inhibition is far less than was reported earlier and its importance for the mechanism of the pyruvate kinase reaction is discussed. PMID:4308294

  7. A hydrous Ca-bearing magnesium carbonate from playa lake sediments, Salines Lake, Spain

    USGS Publications Warehouse

    Queralt, I.; Julia, R.; Plana, F.; Bischoff, J.L.

    1997-01-01

    Sediments of playa Lake Salines, SE, Spain, contain a carbonate mineral characterized by X-ray diffraction peaks very similar to, but systematically shifted from those of pure magnesite. Analyses (SEM, IR and Raman spectroscopy, DTA, TGA, and ICP) indicate the mineral is a hydrous Ca-bearing magnesium carbonate with the chemical formula (Mg0.92,Ca0.08)CO3??3H2O. Thermal characteristics of the mineral are similar to those of other known hydrated magnesium carbonates. X-ray and electron diffraction data suggests a monoclinic system (P21/n space group) with unit-cell parameters of a = 6.063(6), b = 10.668(5), and c = 6.014(4) A?? and ?? = 107.28??.

  8. Synthesis and thermal decomposition behaviors of magnesium borohydride ammoniates with controllable composition as hydrogen storage materials.

    PubMed

    Yang, Yanjing; Liu, Yongfeng; Li, You; Gao, Mingxia; Pan, Hongge

    2013-02-01

    An ammonia-redistribution strategy for synthesizing metal borohydride ammoniates with controllable coordination number of NH(3) was proposed, and a series of magnesium borohydride ammoniates were easily synthesized by a mechanochemical reaction between Mg(BH(4))(2) and its hexaammoniate. A strong dependence of the dehydrogenation temperature and purity of the released hydrogen upon heating on the coordination number of NH(3) was elaborated for Mg(BH(4))(2)·xNH(3) owing to the change in the molar ratio of H(δ+) and H(δ-), the charge distribution on H(δ+) and H(δ-), and the strength of the coordinate bond N:→Mg(2+). The monoammoniate of magnesium borohydride (Mg(BH(4))(2)·NH(3)) was obtained for the first time. It can release 6.5% pure hydrogen within 50 minutes at 180 °C. PMID:23192895

  9. Research of magnesium phosphosilicate cement

    NASA Astrophysics Data System (ADS)

    Ding, Zhu

    Magnesium phosphosilicate cement (MPSC) is a novel phosphate bonded cement, which consists mainly of magnesia, phosphate and silicate minerals. The traditional magnesium phosphate cements (MPCs) usually composed by ammonium phosphate, and gaseous ammonia will emit during mixing and in service. There is no noxious ammonia released from MPSC, furthermore, it can recycle a large volume of the non-hazardous waste. The goal of this research is to investigate the composition, reaction products, reaction mechanism, microstructure, properties, durability and applications of the MPSC. MPSC sets rapidly and has high early strength. It reacts better with solid industrial waste when compared to Portland cement. Many solid industrial wastes, such as fly ash, steel slag, coal gangue, red coal gangue, red mud, barium-bearing slag, copper slag, silica fume, and ground granulated blast furnace slag, have been used as the main component (40% by weight) in MPSC. The research has found that these aluminosilicate (or ironsilicate, or calciumsilicate) minerals with an amorphous or glass structure can enhance the performance of MPSC. The disorganized internal structure of amorphous materials may make it possess higher reactivity compared to the crystalline phases. Chemical reaction between phosphate and these minerals may form an amorphous gel, which is favorable to the cementing. Borax, boric acid and sodium tripolyphosphate have been used as retardants in the MPSC system. It is found that boric acid has a higher retarding effect on the setting of cement, than borax does. However, sodium polyphosphate accelerates the reaction of MPSC. The hydration of MPSC is exothermic reaction. The heat evolution may prompt hydrates formation, and shorten the setting process. Modern materials characterization techniques, XRD, DSC, TG-DTA FTIR, XPS, MAS-NMR, SEM, TEM, MIP, etc. were used to analyze the phase composition, micro morphology, and microstructure of hardened MPSC. The main hydration product

  10. Magnesium phosphate glass cements with ceramic-type properties

    DOEpatents

    Sugama, Toshifumi; Kukacka, Lawrence E.

    1984-03-13

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate exhibiting rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono- and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  11. Magnesium-phosphate-glass cements with ceramic-type properties

    DOEpatents

    Sugama, T.; Kukacka, L.E.

    1982-09-23

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate, exhibits rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono- and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  12. Magnesium phosphate glass cements with ceramic-type properties

    SciTech Connect

    Sugama, T.; Kukacka, L.E.

    1984-03-13

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate exhibiting rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono-and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  13. Cytocompatibility of magnesium and AZ31 alloy with three types of cell lines using a direct in vitro method.

    PubMed

    Mochizuki, Akira; Yahata, Chie; Takai, Hung

    2016-09-01

    Magnesium alloys have been investigated by many researchers as a new absorbable biomaterial owing to their excellent degradability with non-maleficence or low-maleficence in living tissues. In the present work, the in vitro cytocompatibility of an Magnesium alloy was investigated by culturing cells directly on it. Investigations were carried out in terms of the cell viability along with the use of scanning electron microscopy to observe its morphology. The cell lines used were derived from fibroblast, endothelial, and smooth muscle cells. Pure magnesium and AZ31 alloy composed of magnesium (96 %), aluminum (3 %), and zinc (1 %) were adopted as models. The viability of cells on the metal samples and on the margin area of a multi-well plate was investigated. For direct culturing on metal, a depression in the viability and morphologically stressed cells were observed. In addition, the cell viability was also depressed for the margin area. To clarify the factors causing the negative effects, the amount of eluted metal ions and pH changes in the medium because of the erosion of the Magnesium samples were investigated, together with the cytotoxicity of sole metal ions corresponding to the composition of the metals. It was found that Mg(2+), Zn(2+), and Al(3+) ions were less toxic at the investigated concentrations, and that these factors will not produce negative effects on cells. Consequently, these factors cannot fully explain the results. PMID:27568216

  14. Leaf Senescence by Magnesium Deficiency

    PubMed Central

    Tanoi, Keitaro; Kobayashi, Natsuko I.

    2015-01-01

    Magnesium ions (Mg2+) are the second most abundant cations in living plant cells, and they are involved in various functions, including photosynthesis, enzyme catalysis, and nucleic acid synthesis. Low availability of Mg2+ in an agricultural field leads to a decrease in yield, which follows the appearance of Mg-deficient symptoms such as chlorosis, necrotic spots on the leaves, and droop. During the last decade, a variety of physiological and molecular responses to Mg2+ deficiency that potentially link to leaf senescence have been recognized, allowing us to reconsider the mechanisms of Mg2+ deficiency. This review focuses on the current knowledge about the physiological responses to Mg2+ deficiency including a decline in transpiration, accumulation of sugars and starch in source leaves, change in redox states, increased oxidative stress, metabolite alterations, and a decline in photosynthetic activity. In addition, we refer to the molecular responses that are thought to be related to leaf senescence. With these current data, we give an overview of leaf senescence induced by Mg deficiency. PMID:27135350

  15. Magnesium deposition in brain of pregnant patients administered intramuscular magnesium sulphate.

    PubMed

    Pungavkar, Sona

    2014-04-01

    We present three cases of T1 hyperintense signal in the MRI scans of the brains of pregnant patients who were administered magnesium sulphate intramuscularly for control of hypertension during eclampsia. The increase in signal is symmetric and is seen in the globus pallidi of these patients. We postulate it to be secondary to deposition of magnesium in the brain parenchyma. The signal intensity was found to be directly varying according to the level of magnesium in the blood. It decreased over a period of time coming to normalcy after approximately 6months. To the best of our knowledge, this is the first case report which has documented this finding. It has to be determined whether deposition of magnesium in the brain parenchyma could have implications in the use of magnesium sulphate in pregnant patients.

  16. Production of Magnesium by Vacuum Aluminothermic Reduction with Magnesium Aluminate Spinel as a By-Product

    NASA Astrophysics Data System (ADS)

    Wang, Yaowu; You, Jing; Peng, Jianping; Di, Yuezhong

    2016-06-01

    The Pidgeon process currently accounts for 85% of the world's magnesium production. Although the Pidgeon process has been greatly improved over the past 10 years, such production still consumes much energy and material and creates much pollution. The present study investigates the process of producing magnesium by employing vacuum aluminothermic reduction and by using magnesite as material and obtaining magnesium aluminate spinel as a by-product. The results show that compared with the Pidgeon process, producing magnesium by vacuum aluminothermic reduction can save materials by as much as 50%, increase productivity up to 100%, and save energy by more than 50%. It can also reduce CO2 emission by up to 60% and realize zero discharge of waste residue. Vacuum aluminothermic reduction is a highly efficient, low-energy-consumption, and environmentally friendly method of producing magnesium.

  17. Mixtures of maximally entangled pure states

    NASA Astrophysics Data System (ADS)

    Flores, M. M.; Galapon, E. A.

    2016-09-01

    We study the conditions when mixtures of maximally entangled pure states remain entangled. We found that the resulting mixed state remains entangled when the number of entangled pure states to be mixed is less than or equal to the dimension of the pure states. For the latter case of mixing a number of pure states equal to their dimension, we found that the mixed state is entangled provided that the entangled pure states to be mixed are not equally weighted. We also found that one can restrict the set of pure states that one can mix from in order to ensure that the resulting mixed state is genuinely entangled. Also, we demonstrate how these results could be applied as a way to detect entanglement in mixtures of the entangled pure states with noise.

  18. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  19. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  20. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  1. Isomerically Pure Tetramethylrhodamine Voltage Reporters.

    PubMed

    Deal, Parker E; Kulkarni, Rishikesh U; Al-Abdullatif, Sarah H; Miller, Evan W

    2016-07-27

    We present the design, synthesis, and application of a new family of fluorescent voltage indicators based on isomerically pure tetramethylrhodamines. These new Rhodamine Voltage Reporters, or RhoVRs, use photoinduced electron transfer (PeT) as a trigger for voltage sensing, display excitation and emission profiles in the green to orange region of the visible spectrum, demonstrate high sensitivity to membrane potential changes (up to 47% ΔF/F per 100 mV), and employ a tertiary amide derived from sarcosine, which aids in membrane localization and simultaneously simplifies the synthetic route to the voltage sensors. The most sensitive of the RhoVR dyes, RhoVR 1, features a methoxy-substituted diethylaniline donor and phenylenevinylene molecular wire at the 5'-position of the rhodamine aryl ring, exhibits the highest voltage sensitivity to date for red-shifted PeT-based voltage sensors, and is compatible with simultaneous imaging alongside green fluorescent protein-based indicators. The discoveries that sarcosine-based tertiary amides in the context of molecular-wire voltage indicators prevent dye internalization and 5'-substituted voltage indicators exhibit improved voltage sensitivity should be broadly applicable to other types of PeT-based voltage-sensitive fluorophores. PMID:27428174

  2. Bringing Planctomycetes into pure culture

    PubMed Central

    Lage, Olga M.; Bondoso, Joana

    2012-01-01

    Planctomycetes have been known since the description of Planctomyces bekefii by Gimesi at the beginning of the twentieth century (1924), although the first axenic cultures were only obtained in the 1970s. Since then, 11 genera with 14 species have been validly named and five candidatus genera belonging to the anaerobic ammonium oxidation, anammox bacteria have also been discovered. However, Planctomycetes diversity is much broader than these numbers indicate, as shown by environmental molecular studies. In recent years, the authors have attempted to isolate and cultivate additional strains of Planctomycetes. This paper provides a summary of the isolation work that was carried out to obtain in pure culture Planctomycetes from several environmental sources. The following strains of planctomycetes have been successfully isolated: two freshwater strains from the sediments of an aquarium, which were described as a new genus and species, Aquisphaera giovannonii; several Rhodopirellula strains from the sediments of a water treatment recycling tank of a marine fish farm; and more than 140 planctomycetes from the biofilm community of macroalgae. This collection comprises several novel taxa that are being characterized and described. Improvements in the isolation methodology were made in order to optimize and enlarge the number of Planctomycetes isolated from the macroalgae. The existence of an intimate and an important relationship between planctomycetes and macroalgae reported before by molecular studies is therefore supported by culture-dependent methods. PMID:23335915

  3. Low intracellular magnesium in patients with acute pancreatitis and hypocalcemia.

    PubMed Central

    Ryzen, E.; Rude, R. K.

    1990-01-01

    To determine the role of magnesium deficiency in the pathogenesis of hypocalcemia in acute pancreatitis, we measured magnesium levels in serum and in peripheral blood mononuclear cells in 29 patients with acute pancreatitis, 14 of whom had hypocalcemia and 15 of whom had normal calcium levels. Only six patients had overt hypomagnesemia (serum magnesium less than 0.70 mmol per liter [1.7 mg per dl]). The mean serum magnesium concentration in hypocalcemic patients was not significantly lower than in normocalcemic patients, but the mononuclear cell magnesium content in hypocalcemic patients with pancreatitis was significantly lower than in normocalcemic patients with pancreatitis (P less than .01). The serum magnesium level did not correlate with that of serum calcium or the mononuclear cell magnesium content, but the latter did significantly correlate with the serum calcium concentration (r = .81, P less than .001). Most patients with hypocalcemia had a low intracellular magnesium content. Three normomagnesemic, hypocalcemic patients with alcoholic pancreatitis also underwent low-dose parenteral magnesium tolerance testing and showed increased retention of the magnesium load. We conclude that patients with acute pancreatitis and hypocalcemia commonly have magnesium deficiency despite normal serum magnesium concentrations. Magnesium deficiency may play a significant role in the pathogenesis of hypocalcemia in patients with acute pancreatitis. PMID:2407029

  4. Magnesium and Manganese Content of Halophilic Bacteria

    PubMed Central

    Médicis, Eveline De; Paquette, Jean; Gauthier, Jean-Jacques; Shapcott, Dennis

    1986-01-01

    Magnesium and manganese contents were measured by atomic absorption spectrophotometry in bacteria of several halophilic levels, in Vibrio costicola, a moderately halophilic eubacterium growing in 1 M NaCl, Halobacterium volcanii, a halophilic archaebacterium growing in 2.5 M NaCl, Halobacterium cutirubrum, an extremely halophilic archaebacterium growing in 4 M NaCl, and Escherichia coli, a nonhalophilic eubacterium growing in 0.17 M NaCl. Magnesium and manganese contents varied with the growth phase, being maximal at the early log phase. Magnesium and manganese molalities in cell water were shown to increase with the halophilic character of the logarithmically growing bacteria, from 30 mmol of Mg per kg of cell water and 0.37 mmol of Mn per kg of cell water for E. coli to 102 mmol of Mg per kg of cell water and 1.6 mmol of Mn per kg of cell water for H. cutirubrum. The intracellular concentrations of manganese were determined independently by a radioactive tracer technique in V. costicola and H. volcanii. The values obtained by 54Mn loading represented about 70% of the values obtained by atomic absorption. The increase of magnesium and manganese contents associated with the halophilic character of the bacteria suggests that manganese and magnesium play a role in haloadaptation. Images PMID:16347151

  5. Circular dichroism in magnesium sulfite hexahydrate doped with cobalt

    NASA Astrophysics Data System (ADS)

    Bunzarov, Zh.; Iliev, I.; Dimov, T.; Petkova, P.; Kovachev, Tz.; Lyutov, L.; Tzoukrovski, Y.

    2009-10-01

    The new nonlinear crystal of magnesium sulfite hexahydrate (MgSO3.6H2O) belongs to the rare crystallographic class C3 (without a symmetry centre), the other known only representative being sodium periodate (NaIO4). There are some scarce data in the scientific papers about magnesium sulfite hexahydrate's physical properties. Single crystals of significant sizes (up to 40-50 mm) of MgSO3.6H2O as well as such, doped with Ni, Co, and Zn, for the time being are grown only by our own method developed in the Laboratory for Crystal growth at the Faculty of Physics of Sofia University. Recently we have observed the supposed presence of optical activity. Circular dichroism is not observed in pure MgSO3.6H2O. The results of the first ever investigations are presented, which demonstrate the presence of circular dichroism in MgSO3.6H2O doped with Co. The circular dichroism appears in the spectral range from 420 nm to 580 nm. The spectrum of circular dichroism demonstrates a well expressed structure - an isolated maximum at 470 nm and a combination of two overlapped maxima at ~ 495 nm and 520 nm respectively. The spectrum of the circular dichroism is compared with the absorption spectrum of MgSO3.6H2O:Co, along the direction (0001) and with the linear dichroism spectrum measured in direction(1210). It is shown in this way that the circular dichroism appears only in the spectral range of the optical absorption structure due to Co dopant. In the same spectral range can be observed also the linear dichroism determined by Co presence in MgSO3.6H2O.

  6. Combustion Synthesis of Magnesium Aluminate

    SciTech Connect

    Kale, M. A.; Joshi, C. P.; Moharil, S. V.

    2011-10-20

    In the system MgO-Al{sub 2}O{sub 3}, three compounds MgAl{sub 2}O{sub 4}, MgAl{sub 6}O{sub 10}(also expressed as-Mg{sub 0.4}Al{sub 2.4}O{sub 4}) and MgAl{sub 26}O{sub 40} are well known. Importance of the first two is well established. Magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel is a technologically important material due to its interesting thermal properties. The MgAl{sub 2}O{sub 4} ceramics also find application as humidity sensors. Apart from the luminescence studies, the interest in MgAl{sub 2}O{sub 4} is due to various applications such as humidity-sensing and PEM fuel cells, TL/OSL dosimetry of the ionizing radiations, white light source. Interest in the MgAl{sub 6}O{sub 10} has aroused due to possible use as a substrate for GaN growth. Attempt was made to synthesize these compounds by the combustion synthesis using metal nitrates as oxidizer and urea as a fuel. Compounds MgAl{sub 2}O{sub 4} and MgAl{sub 6}O{sub 10} were formed in a single step, while MgAl{sub 26}O{sub 40} was not formed by this procedure. Activation of MgAl{sub 6}O{sub 10} by rare earth ions like Ce{sup 3+}, Eu{sup 3+} and Tb{sup 3+} and ns{sup 2} ion Pb{sup 2+} could be achieved. Excitation bands for MgAl{sub 6}O{sub 10} are at slightly shorter wavelengths compared to those reported for MgAl{sub 2}O{sub 4}.

  7. Ice-melting characteristics of calcium magnesium acetate

    NASA Astrophysics Data System (ADS)

    Schenk, R. U.

    1986-01-01

    The objectives of the study are to determine the pertinent properties of Calcium/Magnesium Acetate and to determine the pH and ratio of calcium to magnesium that provide optimum road deicing characteristics.

  8. Alkalization is responsible for antibacterial effects of corroding magnesium.

    PubMed

    Rahim, Muhammad Imran; Eifler, Rainer; Rais, Bushra; Mueller, Peter P

    2015-11-01

    Magnesium alloys are presently investigated as potential medical implant materials for temporary applications. Magnesium has been reported to have antibacterial activities and could therefore be used to prevent antibiotic treatment-resistant bacterial implant infections. For characterizing the effects of magnesium on infectious bacteria, bioluminescent S. aureus or P. aeruginosa were employed. The proliferation of both types of bacteria was suppressed in the presence of metallic magnesium and also in aqueous magnesium corrosion extracts. Of the two soluble corrosion products, magnesium ions were well tolerated while antibacterial activities correlated with increased pH levels of the supernatants. The alkaline pH alone was sufficient for the antibacterial effects which were completely abolished when the pH of the corrosion supernatants was neutralized. These results demonstrate that pH increases are necessary and sufficient for the antibacterial activity of metallic magnesium. In an animal model magnesium implants showed an enhanced but variable resistance to bacterial colonization.

  9. Acoustic Emission as a Tool for Exploring Deformation Mechanisms in Magnesium and Its Alloys In Situ

    NASA Astrophysics Data System (ADS)

    Vinogradov, Alexei; Máthis, Kristian

    2016-06-01

    Structural performance of magnesium alloys depends strongly on specific deformation mechanisms operating during mechanical loading. Therefore, in situ monitoring of the acting mechanisms is a key to performance tailoring. We review the capacity of the advanced acoustic emission (AE) technique to understand the interplay between two primary deformation mechanisms—dislocation slip and twinning—in real time scale. Details of relative contributions of dislocation slip and deformation twinning to the mechanical response of pure Mg and Mg-Al alloy are discussed in view of AE results obtained with the aid of recently proposed spectral and signal categorization algorithms in conjunction with with neutron diffraction data.

  10. Organochlorine formation in magnesium electrowinning cells.

    PubMed

    Deutscher, R L; Cathro, K J

    2001-04-01

    The formation of organochlorines during the electrolytic production of magnesium was investigated using a laboratory-scale electrolytic cell having a graphite anode, a liquid aluminium alloy cathode, and a molten chloride electrolyte. The cell was operated at current densities ranging from 3000 to 10,000 A m(-2) and at temperatures ranging from 660 degrees C to 750 degrees C. Organochlorines were adsorbed from the cell off-gases onto silica gel, extracted with hexane, and determined by gas chromatography. All compounds identified were fully chlorinated aliphatic and aromatic compounds, the major components being hexachlorobutadiene, hexachlorobenzene, hexachloroethylene, and octachlorostyrene. The total amount of organochlorines per tonne of magnesium produced decreased with electrolysis time and with current density and increased with operating temperature; it was also dependent on the type of graphite employed. The output of organochlorines varied from 5 to 20 g t(-1) of magnesium. PMID:11297394

  11. A miniaturised isotachophoresis method for magnesium determination.

    PubMed

    Prest, Jeff E; Baldock, Sara J; Fielden, Peter R; Goddard, Nicholas J; Treves Brown, Bernard J

    2009-07-01

    The use of malonic acid as a complexing agent has enabled a new method to be devised to allow the determination of magnesium to be made using miniaturised isotachophoresis. Using a leading electrolyte of 10 mmol L(-1) caesium hydroxide and 2 mmol L(-1) malonic acid at pH 5.1 gave the method a high specificity towards magnesium. Investigations using a poly(methyl methacrylate) chip device with an integrated conductivity detector showed that no interference from calcium, strontium, barium and sodium should occur. The method was found to be linear over the range of magnesium concentrations from 0.625 to 75 mg L(-1) and the limit of detection was calculated to be 0.45 mg L(-1). Separations were demonstrated with water samples but the procedure should also be applicable to more complex sample matrices such as inorganic explosive residues, blood or urine. PMID:19205676

  12. Magnesium sulfate administration in subarachnoid hemorrhage.

    PubMed

    Suarez, Jose I

    2011-09-01

    Magnesium offers theoretic vascular and neuroprotective benefits for patients with subarachnoid hemorrhage. An electronic literature search was conducted to identify original research studies describing intravenous magnesium treatment in patients with SAH published in English between January 1990 and October 2010. Seventeen articles were identified and reviewed, including one phase III randomized-controlled clinical trial and six phase II randomized-controlled trials. Study quality was low for most of the included studies, with the phase III trial considered to be of moderate quality. Due to inconsistently reported benefits and the occurrence of side effects, phase II data suggested that intravenous magnesium for SAH provided either no overall net benefit or uncertain trade-offs. Benefit was likewise not supported in the single phase III clinical trial. PMID:21748496

  13. Role of magnesium in cardiovascular diseases.

    PubMed

    Kolte, Dhaval; Vijayaraghavan, Krishnaswami; Khera, Sahil; Sica, Domenic A; Frishman, William H

    2014-01-01

    Magnesium, the fourth most abundant cation in the human body, is involved in several essential physiological, biochemical, and cellular processes regulating cardiovascular function. It plays a critical role in modulating vascular smooth muscle tone, endothelial cell function, and myocardial excitability and is thus central to the pathogenesis of several cardiovascular disorders such as hypertension, atherosclerosis, coronary artery disease, congestive heart failure, and cardiac arrhythmias. This review discusses the vasodilatory, anti-inflammatory, anti-ischemic, and antiarrhythmic properties of magnesium and its current role in the prevention and treatment of cardiovascular disorders.

  14. SOLID STATE JOINING OF MAGNESIUM TO STEEL

    SciTech Connect

    Jana, Saumyadeep; Hovanski, Yuri; Pilli, Siva Prasad; Field, David P.; Yu, Hao; Pan, Tsung-Yu; Santella, M. L.

    2012-06-04

    Friction stir welding and ultrasonic welding techniques were applied to join automotive magnesium alloys to steel sheet. The effect of tooling and process parameters on the post-weld microstructure, texture and mechanical properties was investigated. Static and dynamic loading were utilized to investigate the joint strength of both cast and wrought magnesium alloys including their susceptibility and degradation under corrosive media. The conditions required to produce joint strengths in excess of 75% of the base metal strength were determined, and the effects of surface coatings, tooling and weld parameters on weld properties are presented.

  15. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  16. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  17. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  18. 40 CFR 721.10504 - Surface modified magnesium hydroxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Surface modified magnesium hydroxide... Specific Chemical Substances § 721.10504 Surface modified magnesium hydroxide (generic). (a) Chemical... as surface modified magnesium hydroxide (PMN P-06-682) is subject to reporting under this section...

  19. 40 CFR 721.10504 - Surface modified magnesium hydroxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Surface modified magnesium hydroxide... Specific Chemical Substances § 721.10504 Surface modified magnesium hydroxide (generic). (a) Chemical... as surface modified magnesium hydroxide (PMN P-06-682) is subject to reporting under this section...

  20. Micronized Organic Magnesium Salts Enhance Opioid Analgesia in Rats

    PubMed Central

    Bujalska-Zadrożny, Magdalena; Kulik, Kamila; Ordak, Michał; Sasinowska-Motyl, Małgorzata; Gąsińska, Emilia; de Corde, Anna; Kowalczyk, Agnieszka; Sacharczuk, Mariusz; Naruszewicz, Marek

    2016-01-01

    Purpose As previously reported, magnesium sulphate administered parenterally significantly increased an opioid antinociception in different kinds of pain. Since the typical form of magnesium salts are poorly and slowly absorbed from the gastrointestinal tract we examined whether their micronized form could increase opioids induced antinociception. Methods In behavioural studies on rats morphine, tramadol and oxycodone together with magnesium (lactate dihydrate, hydroaspartate, chloride) in micronized (particles of size D90 < 50 μm) and conventional forms were used. Changes in pain thresholds were determined using mechanical stimuli. The intestinal absorption of two forms of magnesium lactate dihydrate (at the doses of 7.5 or 15 mg ions) in the porcine gut sac model were also compared. Results Micronized form of magnesium lactate dihydrate or hydroaspartate but not chloride (15 mg of magnesium ions kg-1) enhanced the analgesic activity of orally administered opioids, significantly faster and more effective in comparison to the conventional form of magnesium salts (about 40% for oxycodone administered together with a micronized form of magnesium hydroaspartate). Moreover, in vitro studies of transport across porcine intestines of magnesium ions showed that magnesium salts administered in micronized form were absorbed from the intestines to a greater extent than the normal form of magnesium salts. Conclusions The co-administration of micronized magnesium organic salts with opioids increased their synergetic analgesic effect. This may suggest an innovative approach to the treatment of pain in clinical practice. PMID:27792736

  1. Preparation of petaloid microspheres of basic magnesium carbonate.

    PubMed

    Ohkubo, Takahiro; Suzuki, Sei; Mitsuhashi, Kohei; Ogura, Taku; Iwanaga, Shinichi; Sakai, Hideki; Koishi, Masumi; Abe, Masahiko

    2007-05-22

    The synthesis of basic magnesium carbonate was examined under ultrasonic irradiation and was performed by the soda ash method using magnesium sulfate and sodium carbonate as starting materials. The particulate product was evaluated using SEM observations. Ultrasonic irradiation in the preparation of basic magnesium carbonate was found to give fine petaloid microspheres of about 3 mum in primary particle size. PMID:17458985

  2. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  3. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  4. Magnesium Intake and Prevalence of Metabolic Syndrome in Older Adults

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Higher dietary intake of magnesium (Mg) may protect against development of type 2 diabetes. The aim of this study was to examine the association between dietary magnesium intake and metabolic syndrome risk factors in elderly men and women. We examined cross-sectional associations between magnesium i...

  5. Magnesium retention in 12 to 48 month-old children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In adults, adaptation to changes in magnesium intake is largely due to changes in fractional magnesium absorption and urinary magnesium excretion. We sought to examine whether these homeostatic mechanisms also occur in young children. Children, 12–48 m old, were studied (n=30). They were adapted to ...

  6. The art of magnesium transport.

    PubMed

    de Baaij, Jeroen H F

    2015-01-01

    Patients with hypomagnesemia suffer from a wide range of symptoms including muscle cramps, cardiac arrhythmias and epilepsy. Disturbances in body Mg(2+) homeostasis can often be attributed to increased Mg(2+) excretion by the kidney. Within the kidney, the distal convoluted tubule (DCT) segment determines the final Mg(2+) excretion, since no reabsorption takes place beyond this segment of the nephron. On 21(st) of January 2015, Jeroen de Baaij defended his thesis "The Distal Convoluted Tubule: the Art of Magnesium Transport", in which he aimed to identify new genes involved in Mg(2+) reabsorption in the DCT. This review summarizes the main findings of his graduate research. TRPM6 mediates apical Mg(2+) entry into the DCT cell and is highly regulated by EGF, insulin and pH. ATP and flavagline compounds have been characterized as new regulators of TRPM6 activity, providing novel pathways to target Mg(2+) disturbances. Using isolated primary DCT cells from mice, PCBD1 was identified as a new transcriptional regulator of Mg(2+) transport in the DCT. Indeed, patients with PCBD1 mutations were shown to suffer hypomagnesemia and MODY5-like diabetes. Subsequently, the work presented in the thesis focused on the elucidation of the basolateral Mg(2+) extrusion of the DCT cell. In vivo studies using SLC41A3-knockout mice suggest that SLC41A3 may act as Mg(2+) extrusion mechanism. CNNM2 has long been hypothesized to transport Mg(2+) at the basolateral membrane of the DCT. However, by determining the protein topology and homology modeling of the CBS domains, it was argued that CNNM2 is rather an Mg(2+)-sensing mechanism. Follow-up studies using (25)Mg(2+) isotopes showed that CNNM2 increases Mg(2+) uptake when overexpressed in HEK293 cells. Additionally, by knocking down cnnm2 in zebrafish, CNNM2 was demonstrated to be essential for brain development and Mg(2+) homeostasis. Mutations in CNNM2 were shown to cause hypomagnesemia, seizures and intellectual disability. Altogether

  7. Cyclic Plastic Deformation, Fatigue, and the Associated Micro-Mechanisms in Magnesium: From Single Crystal to Polycrystal

    NASA Astrophysics Data System (ADS)

    Yu, Qin

    Magnesium and its alloys have received substantial interests as the government initiatives on energy saving and environment protection demand an increasing use of lightweight materials in structural parts, especially in transportation industries. A good understanding of fatigue behavior in magnesium is critical to ensure the reliability and durability of the magnesium components. Unlike the body centered cubic and face centered cubic metals, fundamental knowledge concerning the cyclic deformation and fatigue in hexagonal close packed magnesium is limited. The current research aims at a better understanding of the micro-mechanisms associated with the cyclic deformation and fatigue of magnesium. Magnesium single crystal was chosen to study the fundamental twinning/detwinning process while extruded polycrystalline pure magnesium was studied for the fatigue damage mechanisms. Cyclic deformation and the corresponding morphology evolution of {1 0 1¯ 2} twinning-detwinning-retwinning are, for the first time, characterized in magnesium single crystal under fully reserved strain-controlled tension-compression utilizing in situ optical microscopy. As loading cycles are increased, the activity of twinning-detwinning-retwinning gradually decreases. Microscopy after fatigue shows that the matrix region having experienced repeated twinning-detwinning cannot be completely detwinned to its original crystal orientation. Fragmented secondary tension twins are found to result from twin-twin interactions. Various twin-twin interaction structures exist in fatigued magnesium single crystal: quilted-looking twin structure, "apparent crossing" twin structure, and double tension twin structure. According to the crystallography of magnesium, twin-twin interactions are classified into Type I for two twin variants sharing the same zone axis and Type II for two twins with different zone axes. For Type I twin-twin interactions, one twin does not transmit across the twin boundary and into the

  8. Magnesium substitution in the structure of orthopedic nanoparticles: A comparison between amorphous magnesium phosphates, calcium magnesium phosphates, and hydroxyapatites.

    PubMed

    Nabiyouni, Maryam; Ren, Yufu; Bhaduri, Sarit B

    2015-01-01

    As biocompatible materials, magnesium phosphates have received a lot of attention for orthopedic applications. During the last decade multiple studies have shown advantages for magnesium phosphate such as lack of cytotoxicity, biocompatibility, strong mechanical properties, and high biodegradability. The present study investigates the role of Mg(+2) and Ca(+2) ions in the structure of magnesium phosphate and calcium phosphate nanoparticles. To directly compare the effect of Mg(+2) and Ca(+2) ions on structure of nanoparticles and their biological behavior, three groups of nanoparticles including amorphous magnesium phosphates (AMPs) which release Mg(+2), calcium magnesium phosphates (CMPs) which release Mg(+2) and Ca(+2), and hydroxyapatites (HAs) which release Ca(+2) were studied. SEM, TEM, XRD, and FTIR were used to evaluate the morphology, crystallinity, and chemical properties of the particles. AMP particles were homogeneous nanospheres, whereas CMPs were combinations of heterogeneous nanorods and nanospheres, and HAs which contained heterogeneous nanosphere particles. Cell compatibility was monitored in all groups to determine the cytotoxicity effect of particles on studied MC3T3-E1 preosteoblasts. AMPs showed significantly higher attachment rate than the HAs after 1 day and both AMPs and CMPs showed significantly higher proliferation rate when compared to HAs after 7days. Gene expression level of osteoblastic markers ALP, COL I, OCN, OPN, RUNX2 were monitored and they were normalized to GAPDH housekeeping gene. Beta actin expression level was monitored as the second housekeeping gene to confirm the accuracy of results. In general, AMPs and CMPs showed higher expression level of osteoblastic genes after 7 days which can further confirm the stimulating role of Mg(+2) and Ca(+2) ions in increasing the proliferation rate, differentiation, and mineralization of MC3T3-E1 preosteoblasts. PMID:25953534

  9. Magnesium substitution in the structure of orthopedic nanoparticles: A comparison between amorphous magnesium phosphates, calcium magnesium phosphates, and hydroxyapatites.

    PubMed

    Nabiyouni, Maryam; Ren, Yufu; Bhaduri, Sarit B

    2015-01-01

    As biocompatible materials, magnesium phosphates have received a lot of attention for orthopedic applications. During the last decade multiple studies have shown advantages for magnesium phosphate such as lack of cytotoxicity, biocompatibility, strong mechanical properties, and high biodegradability. The present study investigates the role of Mg(+2) and Ca(+2) ions in the structure of magnesium phosphate and calcium phosphate nanoparticles. To directly compare the effect of Mg(+2) and Ca(+2) ions on structure of nanoparticles and their biological behavior, three groups of nanoparticles including amorphous magnesium phosphates (AMPs) which release Mg(+2), calcium magnesium phosphates (CMPs) which release Mg(+2) and Ca(+2), and hydroxyapatites (HAs) which release Ca(+2) were studied. SEM, TEM, XRD, and FTIR were used to evaluate the morphology, crystallinity, and chemical properties of the particles. AMP particles were homogeneous nanospheres, whereas CMPs were combinations of heterogeneous nanorods and nanospheres, and HAs which contained heterogeneous nanosphere particles. Cell compatibility was monitored in all groups to determine the cytotoxicity effect of particles on studied MC3T3-E1 preosteoblasts. AMPs showed significantly higher attachment rate than the HAs after 1 day and both AMPs and CMPs showed significantly higher proliferation rate when compared to HAs after 7days. Gene expression level of osteoblastic markers ALP, COL I, OCN, OPN, RUNX2 were monitored and they were normalized to GAPDH housekeeping gene. Beta actin expression level was monitored as the second housekeeping gene to confirm the accuracy of results. In general, AMPs and CMPs showed higher expression level of osteoblastic genes after 7 days which can further confirm the stimulating role of Mg(+2) and Ca(+2) ions in increasing the proliferation rate, differentiation, and mineralization of MC3T3-E1 preosteoblasts.

  10. Method of preparing pure fluorine gas

    DOEpatents

    Asprey, Larned B.

    1976-01-01

    A simple, inexpensive system for purifying and storing pure fluorine is described. The method utilizes alkali metal-nickel fluorides to absorb tank fluorine by forming nickel complex salts and leaving the gaseous impurities which are pumped away. The complex nickel fluoride is then heated to evolve back pure gaseous fluorine.

  11. In Vitro Biocompatibility and Endothelialization of Novel Magnesium-Rare Earth Alloys for Improved Stent Applications

    PubMed Central

    Zhao, Nan; Watson, Nevija; Xu, Zhigang; Chen, Yongjun; Waterman, Jenora; Sankar, Jagannathan; Zhu, Donghui

    2014-01-01

    Magnesium (Mg) based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE) elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg) alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3–10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future. PMID:24921251

  12. Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium.

    PubMed

    Saha, Partha; Roy, Mangal; Datta, Moni Kanchan; Lee, Boeun; Kumta, Prashant N

    2015-12-01

    Magnesium is a new class of biodegradable metals potentially suitable for bone fracture fixation due to its suitable mechanical properties, high degradability and biocompatibility. However, rapid corrosion and loss in mechanical strength under physiological conditions render it unsuitable for load-bearing applications. In the present study, grain refinement was implemented to control bio-corrosion demonstrating improved in vitro bioactivity of magnesium. Pure commercial magnesium was grain refined using different amounts of zirconium (0.25 and 1.0 wt.%). Corrosion behavior was studied by potentiodynamic polarization (PDP) and mass loss immersion tests demonstrating corrosion rate decrease with grain size reduction. In vitro biocompatibility tests conducted by MC3T3-E1 pre-osteoblast cells and measured by DNA quantification demonstrate significant increase in cell proliferation for Mg-1 wt.% Zr at day 5. Similarly, alkaline phosphatase (ALP) activity was higher for grain refined Mg. Alloys were also tested for ability to support osteoclast differentiation using RAW264.7 monocytes with receptor activator of nuclear factor kappa-β ligand (RANKL) supplemented cell culture. Osteoclast differentiation process was observed to be severely restricted for smaller grained Mg. Overall, the results indicate grain refinement to be useful not only for improving corrosion resistance of Mg implants for bone fixation devices but also potentially modulate bone regeneration around the implant.

  13. Magnesium degradation influenced by buffering salts in concentrations typical of in vitro and in vivo models.

    PubMed

    Agha, Nezha Ahmad; Feyerabend, Frank; Mihailova, Boriana; Heidrich, Stefanie; Bismayer, Ulrich; Willumeit-Römer, Regine

    2016-01-01

    Magnesium and its alloys have considerable potential for orthopedic applications. During the degradation process the interface between material and tissue is continuously changing. Moreover, too fast or uncontrolled degradation is detrimental for the outcome in vivo. Therefore in vitro setups utilizing physiological conditions are promising for the material/degradation analysis prior to animal experiments. The aim of this study is to elucidate the influence of inorganic salts contributing to the blood buffering capacity on degradation. Extruded pure magnesium samples were immersed under cell culture conditions for 3 and 10 days. Hank's balanced salt solution without calcium and magnesium (HBSS) plus 10% of fetal bovine serum (FBS) was used as the basic immersion medium. Additionally, different inorganic salts were added with respect to concentration in Dulbecco's modified Eagle's medium (DMEM, in vitro model) and human plasma (in vivo model) to form 12 different immersion media. Influences on the surrounding environment were observed by measuring pH and osmolality. The degradation interface was analyzed by electron-induced X-ray emission (EIXE) spectroscopy, including chemical-element mappings and electron microprobe analysis, as well as Fourier transform infrared reflection micro-spectroscopy (FTIR).

  14. In vitro biocompatibility and endothelialization of novel magnesium-rare Earth alloys for improved stent applications.

    PubMed

    Zhao, Nan; Watson, Nevija; Xu, Zhigang; Chen, Yongjun; Waterman, Jenora; Sankar, Jagannathan; Zhu, Donghui

    2014-01-01

    Magnesium (Mg) based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE) elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg) alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3-10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future.

  15. Direct Hydrogenation Magnesium Boride to Magnesium Borohydride: Demonstration of >11 Weight Percent Reversible Hydrogen Storage

    SciTech Connect

    Severa, Godwin; Ronnebro, Ewa; Jensen, Craig M.

    2010-11-16

    We here for the first time demonstrate direct hydrogenation of magnesium boride, MgB2, to magnesium borohydride, Mg(BH4)2 at 900 bar H2-pressures and 400°C. Upon 14.8wt% hydrogen release, the end-decomposition product of Mg(BH4)2 is MgB2, thus, this is a unique reversible path here obtaining >11wt% H2 which implies promise for a fully reversible hydrogen storage material.

  16. Importance of magnesium chloride repletion after myocardial infarction.

    PubMed

    Sheehan, J

    1989-04-18

    Data pertinent to the role of magnesium deficits in coronary artery disease and myocardial infarction are reviewed. Results of clinical, laboratory and epidemiologic studies indicate an association between magnesium deficiency and a poor prognostic outcome in patients who have had myocardial infarction. It therefore appears to be a reasonable prophylactic measure to monitor closely magnesium status in patients with coronary heart disease and other patients at risk of acute myocardial infarction, and to supplement with magnesium chloride when clinically necessary. In addition, recent studies provide supportive evidence that supplementation of magnesium chloride may reduce the incidence of fatal and nonfatal arrhythmias after an infarct.

  17. Ionic liquid electrolytes for reversible magnesium electrochemistry.

    PubMed

    Kar, Mega; Ma, Zheng; Azofra, Luis Miguel; Chen, Kun; Forsyth, Maria; MacFarlane, Douglas R

    2016-03-14

    Mg has great potential as the basis for a safe, low cost energy storage technology, however, cycling of magnesium is difficult to achieve in most electrolytes. We demonstrate cycling of Mg from a novel alkoxyammonium ionic liquid. DFT calculations highlight the role that Mg coordination with [BH4](-) ions plays in the mechanism.

  18. Preparation of thorium magnesium-zinc reduction

    NASA Technical Reports Server (NTRS)

    Hariharan, A. V.; Knighton, J. B.; Steunenberg, R. K.

    1969-01-01

    Magnesium-zinc reduction of thorium dioxide is used for the preparation of thorium metal. Potential economic advantages of this technique include use of relatively inexpensive reagents for the metal and flux phases, and production of metal of acceptable quality in good yield.

  19. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  20. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed...

  1. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing...

  2. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing...

  3. Constitutive Modeling of Magnesium Alloy Sheets

    SciTech Connect

    Lee, M. G.; Piao, K.; Wagoner, R. H.; Lee, J. K.; Chung, K.; Kim, H. Y.

    2007-05-17

    Magnesium alloy sheets have unique mechanical properties: high in-plane anisotropy/asymmetry of yield stress and hardening response, which have not been thoroughly studied. The unusual mechanical behavior of magnesium alloys has been understood by the limited symmetry crystal structure of h.c.p metals and thus by deformation twinning. In this paper, the phenomenological continuum plasticity models considering the unusual plastic behavior of magnesium alloy sheet were developed for a finite element analysis. A new hardening law based on two-surface model was developed to consider the general stress-strain response of metal sheets such as Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. In terms of the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified to include the anisotropy of magnesium alloys. Also, characterization procedures of material parameters for the constitutive equations were presented and finally the correlation of simulation with measurements was performed to validate the proposed theory.

  4. Effect of magnesium ion on human osteoblast activity

    PubMed Central

    He, L.Y.; Zhang, X.M.; Liu, B.; Tian, Y.; Ma, W.H.

    2016-01-01

    Magnesium, a promising biodegradable metal, has been reported in several studies to increase bone formation. Although there is some information regarding the concentrations of magnesium ions that affect bone remodeling at a cellular level, little is known about the effect of magnesium ions on cell gap junctions. Therefore, this study aimed to systematically investigate the effects of different concentrations of magnesium on bone cells, and further evaluate its effect on gap junctions of osteoblasts. Cultures of normal human osteoblasts were treated with magnesium ions at concentrations of 1, 2 and 3 mM, for 24, 48 and 72 h. The effects of magnesium ions on viability and function of normal human osteoblasts and on gap junction intercellular communication (GJIC) in osteoblasts were investigated. Magnesium ions induced significant (P<0.05) increases in cell viability, alkaline phosphate activity and osteocalcin levels of human osteoblasts. These stimulatory actions were positively associated with the concentration of magnesium and the time of exposure. Furthermore, the GJIC of osteoblasts was significantly promoted by magnesium ions. In conclusion, this study demonstrated that magnesium ions induced the activity of osteoblasts by enhancing GJIC between cells, and influenced bone formation. These findings may contribute to a better understanding of the influence of magnesium on bone remodeling and to the advance of its application in clinical practice. PMID:27383121

  5. Nanostructured magnesium has fewer detrimental effects on osteoblast function

    PubMed Central

    Weng, Lucy; Webster, Thomas J

    2013-01-01

    Efforts have been made recently to implement nanoscale surface features on magnesium, a biodegradable metal, to increase bone formation. Compared with normal magnesium, nanostructured magnesium has unique characteristics, including increased grain boundary properties, surface to volume ratio, surface roughness, and surface energy, which may influence the initial adsorption of proteins known to promote the function of osteoblasts (bone-forming cells). Previous studies have shown that one way to increase nanosurface roughness on magnesium is to soak the metal in NaOH. However, it has not been determined if degradation of magnesium is altered by creating nanoscale features on its surface to influence osteoblast density. The aim of the present in vitro study was to determine the influence of degradation of nanostructured magnesium, created by soaking in NaOH, on osteoblast density. Our results showed a less detrimental effect of magnesium degradation on osteoblast density when magnesium was treated with NaOH to create nanoscale surface features. The detrimental degradation products of magnesium are of significant concern when considering use of magnesium as an orthopedic implant material, and this study identified a surface treatment, ie, soaking in NaOH to create nanoscale features for magnesium that can improve its use in numerous orthopedic applications. PMID:23674891

  6. Assessment of the magnesium primary production technology. Final report

    SciTech Connect

    Flemings, M.C.; Kenney, G.B.; Sadoway, D.R.; Clark, J.P.; Szekely, J.

    1981-02-01

    At current production levels, direct energy savings achievable in primary magnesium production are 1.2 milliquads of energy per annum. Were magnesium to penetrate the automotive market to an average level of 50 pounds per vehicle, the resultant energy savings at the production stage would be somewhat larger, but the resulting savings in gasoline would conserve an estimated 325 milliquads of energy per year. The principal barrier to more widespread use of magnesium in the immediate future is its price. A price reduction of magnesium of 10% would lead to widespread conversion of aluminum die and permanent mold castings to magnesium. This report addresses the technology of electrolytic and thermic magnesium production and the economics of expanded magnesium production and use.

  7. Magnesium in CKD: more than a calcification inhibitor?

    PubMed

    Floege, Jürgen

    2015-06-01

    Magnesium fulfils important roles in multiple physiological processes. Accordingly, a tight regulation of magnesium homeostasis is essential. Dysregulated magnesium serum levels, in particular hypomagnesaemia, are common in patients with chronic kidney disease (CKD) and have been associated with poor clinical outcomes. In cell culture studies as well as in clinical situations magnesium levels were associated with vascular calcification, cardiovascular disease and altered bone-mineral metabolism. Magnesium has also been linked to diseases such as metabolic syndrome, diabetes, hypertension, fatigue and depression, all of which are common in CKD. The present review summarizes and discusses the latest clinical data on the impact of magnesium and possible effects of higher levels on the health status of patients with CKD, including an outlook on the use of magnesium-based phosphate-binding agents in this context.

  8. Magnesium Alloys as a Biomaterial for Degradable Craniofacial Screws

    PubMed Central

    Henderson, Sarah E.; Verdelis, Konstantinos; Maiti, Spandan; Pal, Siladitya; Chung, William L.; Chou, Da-Tren; Kumta, Prashant N.; Almarza, Alejandro J.

    2014-01-01

    Recently, magnesium (Mg) alloys have received significant attention as a potential biomaterial for degradable implants, and this study was directed at evaluating the suitability of Mg for craniofacial bone screws. The objective was to implant screws fabricated from commercially available Mg-alloys (pure Mg and AZ31) in-vivo in a rabbit mandible. First, Mg-alloy screws were compared to stainless steel screws in an in-vitro pull-out test and determined to have a similar holding strength (~40N). A finite element model of the screw was created using the pull-out test data, and the model can be used for future Mg-alloy screw design. Then, Mg-alloy screws were implanted for 4, 8, and 12 weeks, with two controls of an osteotomy site (hole) with no implant and a stainless steel screw implanted for 12 weeks. MicroCT (computed tomography) was used to assess bone remodeling and Mg-alloy degradation, both visually and qualitatively through volume fraction measurements for all time points. Histologic analysis was also completed for the Mg-alloys at 12 weeks. The results showed that craniofacial bone remodeling occurred around both Mg-alloy screw types. Pure Mg had a different degradation profile than AZ31, however bone growth occurred around both screw types. The degradation rate of both Mg-alloy screw types in the bone marrow space and the muscle were faster than in the cortical bone space at 12 weeks. Furthermore, it was shown that by alloying Mg, the degradation profile could be changed. These results indicate the promise of using Mg-alloys for craniofacial applications. PMID:24384125

  9. Effect of magnesium oxide content on oxidation behavior of some superalloy-base cermets

    NASA Technical Reports Server (NTRS)

    Zaplatynsky, I.

    1975-01-01

    The effect of increasing magnesium oxide (MgO) content on the cyclic oxidation resistance of hot-pressed cermets of MgO in NiCrAlY, MgO in Hoskins-875, MgO in Inconel-702, and MgO in Hastelloy-X was investigated. The cermets with magnesium oxide levels of 5, 10, 20, and 40 vol percent were examined. The cyclic oxidation behavior of these cermets at 1100 and 1200 C in still air was determined by a thermogravimetric method supplemented by X-ray diffraction analysis and light and electron microscopy. In all instances, MgO prevented grain growth in the metallic phase. No evidence of oxidation along interphase boundaries was detected. Cermets of MgO in NiCrAlY and MgO in Hoskins-875 were superior to cermets of MgO in Inconel-702 and MgO in Hastelloy-X. Their oxidation resistance was degraded only when the MgO content was 40 vol percent. The oxidation behavior of MgO-in-Inconel-702 powder cermets containing 5- and 10-vol percent MgO was approximately similar to that of pure Inconel-702 compacts. The 20- and 40-vol percent MgO content reduced the oxidation resistance of MgO-in-Inconel-702 powder cermets relative to that of pure Inconel-702.

  10. Magnesium stearate increases salbutamol sulphate dispersion: what is the mechanism?

    PubMed

    Tay, Tracy; Das, Shyamal; Stewart, Peter

    2010-01-01

    The objective was to understand the mechanism of enhancement in salbutamol sulphate (SS) respiratory deposition through addition of magnesium stearate (MgSt). The mixing of MgSt with micronized SS occurred using a Turbula mixer (101 rpm), whilst varying mixing time and MgSt concentration and size. Deposition of SS was determined by a twin-stage impinger. Particle size distributions were obtained using the Malvern Mastersizer 2000. Morphology was examined by scanning electron microscopy and surface energy determined using inverse gas chromatography. Mixing of SS with increasing concentrations of MgSt improved dispersion (FPF of 3.3% using 1% w/w MgSt, 4.5% using 5% w/w MgSt and 7.8% using 10% w/w MgSt compared with 1.4% of pure SS for 20mg doses) when mixed for 0.5h; SS dispersion improved further after 3.5h of mixing. In addition to the action of the MgSt in coating SS particles, a greater understanding of the function of MgSt particles in acting as micro-carriers and in changing the mixture structure through incorporation into agglomerates has been achieved. The mechanistic understanding of improvement in drug deposition using MgSt will allow more directed strategies to be employed in designing powder formulations for inhalation.

  11. Magnesium stearate increases salbutamol sulphate dispersion: what is the mechanism?

    PubMed

    Tay, Tracy; Das, Shyamal; Stewart, Peter

    2010-01-01

    The objective was to understand the mechanism of enhancement in salbutamol sulphate (SS) respiratory deposition through addition of magnesium stearate (MgSt). The mixing of MgSt with micronized SS occurred using a Turbula mixer (101 rpm), whilst varying mixing time and MgSt concentration and size. Deposition of SS was determined by a twin-stage impinger. Particle size distributions were obtained using the Malvern Mastersizer 2000. Morphology was examined by scanning electron microscopy and surface energy determined using inverse gas chromatography. Mixing of SS with increasing concentrations of MgSt improved dispersion (FPF of 3.3% using 1% w/w MgSt, 4.5% using 5% w/w MgSt and 7.8% using 10% w/w MgSt compared with 1.4% of pure SS for 20mg doses) when mixed for 0.5h; SS dispersion improved further after 3.5h of mixing. In addition to the action of the MgSt in coating SS particles, a greater understanding of the function of MgSt particles in acting as micro-carriers and in changing the mixture structure through incorporation into agglomerates has been achieved. The mechanistic understanding of improvement in drug deposition using MgSt will allow more directed strategies to be employed in designing powder formulations for inhalation. PMID:19748561

  12. Magnesium Doping Controlled Density and Mobility of Two-Dimensional Electron Gas in MgxZn1-xO/ZnO Heterostructures

    NASA Astrophysics Data System (ADS)

    Falson, Joseph; Maryenko, Denis; Kozuka, Yusuke; Tsukazaki, Atsushi; Kawasaki, Masashi

    2011-09-01

    The magnesium content in MgxZn1-xO/ZnO heterostructures grown by molecular beam epitaxy enables the careful control of the carrier density of the two-dimensional electron system down to 5.6×1010 cm-2 while retaining a mobility of 200,000 cm2 V-1 s-1 when pursuing magnesium concentrations as low as x = 0.0038. By selecting an optimum magnesium content (x˜0.01), the mobility is enhanced to over 700,000 cm2 V-1 s-1 due to reduced impurity levels associated with the use of pure distilled ozone and avoiding interface roughness scattering. This control technique allows access to the coherent transport region with strong electron-electron interaction.

  13. Quantifying the coherence of pure quantum states

    NASA Astrophysics Data System (ADS)

    Chen, Jianxin; Grogan, Shane; Johnston, Nathaniel; Li, Chi-Kwong; Plosker, Sarah

    2016-10-01

    In recent years, several measures have been proposed for characterizing the coherence of a given quantum state. We derive several results that illuminate how these measures behave when restricted to pure states. Notably, we present an explicit characterization of the closest incoherent state to a given pure state under the trace distance measure of coherence. We then use this result to show that the states maximizing the trace distance of coherence are exactly the maximally coherent states. We define the trace distance of entanglement and show that it coincides with the trace distance of coherence for pure states. Finally, we give an alternate proof to a recent result that the ℓ1 measure of coherence of a pure state is never smaller than its relative entropy of coherence.

  14. Magnesium degradation products: effects on tissue and human metabolism.

    PubMed

    Seitz, J-M; Eifler, R; Bach, Fr-W; Maier, H J

    2014-10-01

    Owing to their mechanical properties, metallic materials present a promising solution in the field of resorbable implants. The magnesium metabolism in humans differs depending on its introduction. The natural, oral administration of magnesium via, for example, food, essentially leads to an intracellular enrichment of Mg(2+) . In contrast, introducing magnesium-rich substances or implants into the tissue results in a different decomposition behavior. Here, exposing magnesium to artificial body electrolytes resulted in the formation of the following products: magnesium hydroxide, magnesium oxide, and magnesium chloride, as well as calcium and magnesium apatites. Moreover, it can be assumed that Mg(2+) , OH(-) ions, and gaseous hydrogen are also present and result from the reaction for magnesium in an aqueous environment. With the aid of physiological metabolic processes, the organism succeeds in either excreting the above mentioned products or integrating them into the natural metabolic process. Only a burst release of these products is to be considered a problem. A multitude of general tissue effects and responses from the Mg's degradation products is considered within this review, which is not targeting specific implant classes. Furthermore, common alloying elements of magnesium and their hazardous potential in vivo are taken into account.

  15. Transport of Magnesium by a Bacterial Nramp-Related Gene

    PubMed Central

    Rodionov, Dmitry A.; Freedman, Benjamin G.; Senger, Ryan S.; Winkler, Wade C.

    2014-01-01

    Magnesium is an essential divalent metal that serves many cellular functions. While most divalent cations are maintained at relatively low intracellular concentrations, magnesium is maintained at a higher level (∼0.5–2.0 mM). Three families of transport proteins were previously identified for magnesium import: CorA, MgtE, and MgtA/MgtB P-type ATPases. In the current study, we find that expression of a bacterial protein unrelated to these transporters can fully restore growth to a bacterial mutant that lacks known magnesium transporters, suggesting it is a new importer for magnesium. We demonstrate that this transport activity is likely to be specific rather than resulting from substrate promiscuity because the proteins are incapable of manganese import. This magnesium transport protein is distantly related to the Nramp family of proteins, which have been shown to transport divalent cations but have never been shown to recognize magnesium. We also find gene expression of the new magnesium transporter to be controlled by a magnesium-sensing riboswitch. Importantly, we find additional examples of riboswitch-regulated homologues, suggesting that they are a frequent occurrence in bacteria. Therefore, our aggregate data discover a new and perhaps broadly important path for magnesium import and highlight how identification of riboswitch RNAs can help shed light on new, and sometimes unexpected, functions of their downstream genes. PMID:24968120

  16. Influence factors on the formation of magnesium nanowires prepared by physical vapor deposition

    NASA Astrophysics Data System (ADS)

    Wang, Han; Song, Xiping; You, Li; Zhang, Bei

    2015-12-01

    Magnesium nanowires were successfully prepared by a physical vapor deposition method, and influence factors on the formation of magnesium nanowires were discussed based on the evaporation/deposition temperature, vacuum level, magnesium vapor concentration and deposition time. The results show that the formation of magnesium nanowires occurs within a specific evaporation/deposition temperature range. Magnesium nanowires become thicker and longer and finally convert into magnesium micronparticles with the increase of evaporation temperature or decrease of deposition temperature. The vacuum level also plays a decisive role in the formation of magnesium nanowires that magnesium nanowires can only be prepared in a high vacuum level. The magnesium vapor concentration and deposition time also have significant influences on the formation of magnesium nanowires. A distribution map of magnesium nanowire is set up based on our experimental results and a criterion of supersaturation of magnesium vapors is proposed in the explanation of the formation of magnesium nanowires.

  17. Dark fermentation on biohydrogen production: Pure culture.

    PubMed

    Lee, Duu-Jong; Show, Kuan-Yeow; Su, Ay

    2011-09-01

    Biohydrogen is regarded as an attractive future clean energy carrier due to its high energy content and environmental-friendly conversion. While biohydrogen production is still in the early stage of development, there have been a variety of laboratory- and pilot-scale systems developed with promising potential. This work presents a review of literature reports on the pure hydrogen-producers under anaerobic environment. Challenges and perspective of biohydrogen production with pure cultures are also outlined.

  18. Rehabilitation of pure alexia: A review

    PubMed Central

    Starrfelt, Randi; Ólafsdóttir, Rannveig Rós; Arendt, Ida-Marie

    2013-01-01

    Acquired reading problems caused by brain injury (alexia) are common, either as a part of an aphasic syndrome, or as an isolated symptom. In pure alexia, reading is impaired while other language functions, including writing, are spared. Being in many ways a simple syndrome, one would think that pure alexia was an easy target for rehabilitation efforts. We review the literature on rehabilitation of pure alexia from 1990 to the present, and find that patients differ widely on several dimensions, such as alexia severity and associated deficits. Many patients reported to have pure alexia in the reviewed studies, have associated deficits such as agraphia or aphasia and thus do not strictly conform to the diagnosis. Few studies report clear and generalisable effects of training, none report control data, and in many cases the reported findings are not supported by statistics. We can, however, tentatively conclude that Multiple Oral Re-reading techniques may have some effect in mild pure alexia where diminished reading speed is the main problem, while Tacile-Kinesthetic training may improve letter identification in more severe cases of alexia. There is, however, still a great need for well-designed and controlled studies of rehabilitation of pure alexia. PMID:23808895

  19. Thermal conductivities of nanostructured magnesium oxide coatings deposited on magnesium alloys by plasma electrolytic oxidation.

    PubMed

    Shen, Xinwei; Nie, Xueyuan; Hu, Henry

    2014-10-01

    The resistances of magnesium alloys to wear, friction and corrosion can be effectively improved by depositing coatings on their surfaces. However, the coatings can also reduce the heat transfer from the coated components to the surroundings (e.g., coated cylinder bores for internal combustion of engine blocks). In this paper, nanostructured magnesium oxides were produced by plasma electrolytic oxidation (PEO) process on the magnesium alloy AJ62 under different current densities. The guarded comparative heat flow method was adopted to measure the thermal conductivities of such coatings which possess gradient nanoscale grain sizes. The aim of the paper is to explore how the current density in the PEO process affects the thermal conductivity of the nanostructured magnesium coatings. The experimental results show that, as the current density rises from 4 to 20 A/mm2, the thermal conductivity has a slight increase from 0.94 to 1.21 W/m x K, which is significantly smaller than that of the corresponding bulk magnesium oxide materials (29.4 W/m x K). This mostly attributed to the variation of the nanoscale grain sizes of the PEO coatings. PMID:25942897

  20. Thermal conductivities of nanostructured magnesium oxide coatings deposited on magnesium alloys by plasma electrolytic oxidation.

    PubMed

    Shen, Xinwei; Nie, Xueyuan; Hu, Henry

    2014-10-01

    The resistances of magnesium alloys to wear, friction and corrosion can be effectively improved by depositing coatings on their surfaces. However, the coatings can also reduce the heat transfer from the coated components to the surroundings (e.g., coated cylinder bores for internal combustion of engine blocks). In this paper, nanostructured magnesium oxides were produced by plasma electrolytic oxidation (PEO) process on the magnesium alloy AJ62 under different current densities. The guarded comparative heat flow method was adopted to measure the thermal conductivities of such coatings which possess gradient nanoscale grain sizes. The aim of the paper is to explore how the current density in the PEO process affects the thermal conductivity of the nanostructured magnesium coatings. The experimental results show that, as the current density rises from 4 to 20 A/mm2, the thermal conductivity has a slight increase from 0.94 to 1.21 W/m x K, which is significantly smaller than that of the corresponding bulk magnesium oxide materials (29.4 W/m x K). This mostly attributed to the variation of the nanoscale grain sizes of the PEO coatings.

  1. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    The need to produce lighter components in transportation equipment is the main driver in the increasing demand for magnesium castings. In many automotive applications, components can be made of magnesium or aluminum. While being lighter, often times the magnesium parts have lower impact and fatigue properties than the aluminum. The main objective of this study was to identify potential improvements in the impact resistance of magnesium alloys. The most common magnesium alloys in automotive applications are AZ91D, AM50 and AM60. Accordingly, these alloys were selected as the main candidates for the study. Experimental quantities of these alloys were melted in an electrical furnace under a protective atmosphere comprising sulfur hexafluoride, carbon dioxide and dry air. The alloys were cast both in a permanent mold and in a UBE 315 Ton squeeze caster. Extensive evaluation of tensile, impact and fatigue properties was conducted at CWRU on permanent mold and squeeze cast test bars of AZ91, AM60 and AM50. Ultimate tensile strength values between 20ksi and 30ksi were obtained. The respective elongations varied between 25 and 115. the Charpy V-notch impact strength varied between 1.6 ft-lb and 5 ft-lb depending on the alloy and processing conditions. Preliminary bending fatigue evaluation indicates a fatigue limit of 11-12 ksi for AM50 and AM60. This is about 0.4 of the UTS, typical for these alloys. The microstructures of the cast specimens were investigated with optical and scanning electron microscopy. Concomitantly, a study of the fracture toughness in AM60 was conducted at ORNL as part of the study. The results are in line with values published in the literature and are representative of current state of the art in casting magnesium alloys. The experimental results confirm the strong relationship between aluminum content of the alloys and the mechanical properties, in particular the impact strength and the elongation. As the aluminum content increases from about 5

  2. Lithium-aluminum-magnesium electrode composition

    DOEpatents

    Melendres, Carlos A.; Siegel, Stanley

    1978-01-01

    A negative electrode composition is presented for use in a secondary, high-temperature electrochemical cell. The cell also includes a molten salt electrolyte of alkali metal halides or alkaline earth metal halides and a positive electrode including a chalcogen or a metal chalcogenide as the active electrode material. The negative electrode composition includes up to 50 atom percent lithium as the active electrode constituent and a magnesium-aluminum alloy as a structural matrix. Various binary and ternary intermetallic phases of lithium, magnesium, and aluminum are formed but the electrode composition in both its charged and discharged state remains substantially free of the alpha lithium-aluminum phase and exhibits good structural integrity.

  3. Magnesium, a drug of diverse use.

    PubMed

    Akhtar, Mohammad Irfan; Ullah, Hameed; Hamid, Mohammad

    2011-12-01

    Magnesium has evolved as a drug with diverse clinical applications. Mg++ is an important caution and its homeostasis is very important for normal body functioning. The physiological role of Mg is due to its calcium channel blocking properties at smooth muscle, skeletal muscle and conduction system levels. The analgesic properties are due to NMDA receptor blocking action. Mg++ is beneficial in acute Myocardial Infarction, protection during open heart surgery and treatment and prevention of heart rhythm disturbances. Mg has an established role in the management of preeclampsia and eclampsia. Magnesium prevents or controls convulsions by blocking neuromuscular transmission and decreasing the release of acetylcholine at the motor nerve terminals. The use of MgSO4 in treating tetanus and acute asthma is established. In conclusion, Mg is a cost effective, widely used drug with multidisciplinary applications. Its majority of physiological effects are attributed to calcium channel blocking properties. PMID:22355971

  4. Lead magnesium niobate actuator for micropositioning

    DOEpatents

    Swift, Charles D.; Bergum, John W.

    1994-01-01

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated.

  5. Lead magnesium niobate actuator for micropositioning

    DOEpatents

    Swift, C.D.; Bergum, J.W.

    1994-10-25

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated. 3 figs.

  6. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium carbonate hydroxide. It is a white...), p. 177, which is incorporated by reference. Copies are available from the National Academy Press... as defined in § 170.3(o)(20) of this chapter; a pH control agent as defined in § 170.3(o)(23) of...

  7. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium... Food Chemicals Codex, 3d Ed. (1981), p. 177, which is incorporated by reference. Copies are available... chapter; a nutrient supplement as defined in § 170.3(o)(20) of this chapter; a pH control agent as...

  8. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium... Food Chemicals Codex, 3d Ed. (1981), p. 177, which is incorporated by reference. Copies are available... chapter; a nutrient supplement as defined in § 170.3(o)(20) of this chapter; a pH control agent as...

  9. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium carbonate... Chemicals Codex, 3d Ed. (1981), p. 177, which is incorporated by reference. Copies are available from the... as defined in § 170.3(o)(20) of this chapter; a pH control agent as defined in § 170.3(o)(23) of...

  10. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium... Food Chemicals Codex, 3d Ed. (1981), p. 177, which is incorporated by reference. Copies are available... chapter; a nutrient supplement as defined in § 170.3(o)(20) of this chapter; a pH control agent as...

  11. Does dietary magnesium modulate blood lipids?

    PubMed

    Singh, R B; Rastogi, S S; Mani, U V; Seth, J; Devi, L

    1991-07-01

    In a randomized, single-blind, controlled study (400 patients aged 25-63 yr; 374 males, 26 females), 206 subjects were administered a magnesium-rich diet, and 194 subjects their usual diet, for 6 wk. Age, sex, body weight, hypertension, hyperlipidemia, smoking, obesity, diuretic therapy, and diabetes were comparable between the two groups, as were laboratory data at entry to the study. Intervention-group A received a significantly higher amount of dietary magnesium and potassium compared to group B, which received its usual diet. After 6 wk, there was a significant fall in total serum cholesterol (228.5 +/- 46.2 mg/dL), LDL cholesterol 146.5 +/- 75.5 mg/dL), and triglyceride (143.8 +/- 40.5 mg/dL) in group A compared to serum cholesterol (242.5 +/- 58.2 mg/dL), LDL cholesterol (157.0 +/- 78.4 mg/dL), and triglyceride (156.5 +/- 60.0 mg/dL) at entry to study, but no such changes in group-B subjects. HDL cholesterol showed a marginal mean decrease of 0.8 mg/dL in group B and a 2.5 mg/dL increase in group A. The changes in blood lipids were consistent with an increased intake of magnesium and with a rise in serum levels. Although a general blood-lipid-reducing effect of such a diet cannot be excluded, it is possible that dietary magnesium may have contributed to the reduction of total serum cholesterol, LDL cholesterol, and triglyceride, and the marginal rise in HDL cholesterol. More studies with longer follow-up periods are needed to confirm this observation. PMID:1718369

  12. Sodium-dependent magnesium uptake by ferret red cells.

    PubMed Central

    Flatman, P W; Smith, L M

    1991-01-01

    1. Magnesium uptake can be measured in ferret red cells incubated in media containing more than 1 mM-magnesium. Uptake is substantially increased if the sodium concentration in the medium is reduced. 2. Magnesium uptake is half-maximally activated by 0.37 mM-external magnesium when the external sodium concentration is 5 mM. Increasing the external sodium concentration increases the magnesium concentration needed to activate the system. 3. Magnesium uptake is increased by reducing the external sodium concentration. Uptake is half-maximum at sodium concentrations of 17, 22 and 62 nM when the external magnesium concentrations are 2, 5 and 10 mM respectively. 4. Replacement of external sodium with choline does not affect the membrane potential of ferret red cells over a 45 min period. 5. Magnesium uptake from media containing 5 mM-sodium is inhibited by amiloride, quinidine and imipramine. It is not affected by ouabain or bumetanide. Vanadate stimulates magnesium uptake but has no effect on magnesium efflux. 6. When cell ATP content is reduced to 19 mumol (1 cell)-1 by incubating cells for 3 h with 2-deoxyglucose, magnesium uptake falls by 50% in the presence of 5 mM-sodium and is completely abolished in the presence of 145 mM-sodium. Some of the inhibition may be due to the increase in intracellular ionized magnesium concentration ([Mg2+]i) from 0.7 to 1.0 mM which occurs under these conditions. 7. Magnesium uptake can be driven against a substantial electrochemical gradient if the external sodium concentration is reduced sufficiently. 8. These findings are discussed in terms of several possible models for magnesium transport. It is concluded that the majority of magnesium uptake observed in low-sodium media is via sodium-magnesium antiport. A small portion of uptake is through a parallel leak pathway. It is believed that the antiport is responsible for maintaining [Mg2+]i below electrochemical equilibrium in these cells at physiological external sodium concentration

  13. Biodegradable magnesium-hydroxyapatite metal matrix composites.

    PubMed

    Witte, Frank; Feyerabend, Frank; Maier, Petra; Fischer, Jens; Störmer, Michael; Blawert, Carsten; Dietzel, Wolfgang; Hort, Norbert

    2007-04-01

    Recent studies indicate that there is a high demand to design magnesium alloys with adjustable corrosion rates and suitable mechanical properties. An approach to this challenge might be the application of metal matrix composite (MMC) based on magnesium alloys. In this study, a MMC made of magnesium alloy AZ91D as a matrix and hydroxyapatite (HA) particles as reinforcements have been investigated in vitro for mechanical, corrosive and cytocompatible properties. The mechanical properties of the MMC-HA were adjustable by the choice of HA particle size and distribution. Corrosion tests revealed that HA particles stabilised the corrosion rate and exhibited more uniform corrosion attack in artificial sea water and cell solutions. The phase identification showed that all samples contained hcp-Mg, Mg(17)Al(12), and HA before and after immersion. After immersion in artificial sea water CaCO3 was found on MMC-HA surfaces, while no formation of CaCO3 was found after immersion in cell solutions with and without proteins. Co-cultivation of MMC-HA with human bone derived cells (HBDC), cells of an osteoblasts lineage (MG-63) and cells of a macrophage lineage (RAW264.7) revealed that RAW264.7, MG-63 and HBDC adhere, proliferate and survive on the corroding surfaces of MMC-HA. In summary, biodegradable MMC-HA are cytocompatible biomaterials with adjustable mechanical and corrosive properties.

  14. Sea water magnesium fuel cell power supply

    NASA Astrophysics Data System (ADS)

    Hahn, Robert; Mainert, Jan; Glaw, Fabian; Lang, K.-D.

    2015-08-01

    An environmentally friendly magnesium fuel cell system using seawater electrolyte and atmospheric oxygen was tested under practical considerations for use as maritime power supply. The hydrogen rate and therefore the power density of the system were increased by a factor of two by using hydrogen evolution cathodes with a gas separation membrane instead of submerged cathodes without gas separation. Commercial magnesium AZ31 rolled sheet anodes can be dissolved in seawater for hydrogen production, down to a thickness below 100 μm thickness, resulting in hydrogen generation efficiency of the anode of over 80%. A practical specific energy/energy density of the alloy of more than 1200 Wh/kg/3000 Wh/l was achieved when coupled to a fuel cell with atmospheric air breathing cathode. The performance of several AZ31 alloy anodes was tested as well as the influence of temperature, electrolyte concentration and anode - cathode separation. The excess hydrogen produced by the magnesium hydrogen evolving cell, due to the negative difference effect, is proportional to the cell current in case of the AZ31 alloys, which simplifies system control considerably. Stable long-term operation of the system was demonstrated at low pressures which can be maintained in an open-seawater-submerged hydrogen generator.

  15. Adsorption of β-carotene on modified magnesium silicate

    NASA Astrophysics Data System (ADS)

    Sun, Shanshan; Guo, Ning; Fu, Yongfeng

    2016-02-01

    Modified flocculation magnesium silicate is prepared by a hydrothermal process at 120°C for 18 h after adding Al2(SO4)3 into the magnesium silicate gel. Compared with standard magnesium silicate with 328.116 m2 g-1 surface area, this modified magnesium silicate has a bigger BET surface area of 536.803 m2 g-1 and a lower interlayer water content. Modified magnesium silicate exhibits high β-carotene adsorption with a maximum adsorption capacity of 364.96 mg g-1. It is shown that when suspended in organic solvent, this material can be used effectively for carotenoid separation. Furthermore, our results suggest that modified magnesium silicate may be a promising candidate as an absorbent in the decoloring of oil.

  16. Effects of magnesium deficiency--more than skin deep.

    PubMed

    Chandrasekaran, Navin Chandrakanth; Weir, Christopher; Alfraji, Sumaya; Grice, Jeff; Roberts, Michael S; Barnard, Ross T

    2014-10-01

    Dead Sea and magnesium salt therapy are two of the oldest forms of treatment for skin disease and several other disorders, supported by a body of largely anecdotal evidence. In this paper we review possible pathways for penetration of magnesium ions through the epidermis to reach the circulation, in turn replenishing cellular magnesium levels. We also discuss mechanisms for intercellular movement of magnesium ions and possible mechanisms for the interaction between magnesium ions and inflammatory mediators. Upon addition of magnesium ions in vitro, the expression of inflammatory mediators such as tumour necrosis factor α (TNFα) and nuclear factor κβ (NFκβ) is down regulated. Dysregulation of these and other inflammatory mediators has been linked to several inflammatory disorders, including asthma, arthritis, atherosclerosis and neuroinflammation.

  17. Reversible Dehydrogenation of Magnesium Borohydride to Magnesium Triborane in the Solid State Under Moderate Conditions

    SciTech Connect

    Chong, Marina; Karkamkar, Abhijeet J.; Autrey, Thomas; Orimo, Shin-ichi; Jalisatgi, Satish; Jensen, Craig M.

    2011-02-17

    Thermal decomposition of magnesium borohydride, Mg(BH4)2, in the solid state was studied by a combination of PCT, TGA/MS and NMR spectroscopy. Dehydrogenation of Mg(BH4)2 at 200 °C, results in the highly selective formation of magnesium triborane, Mg(B3H8)2. This process is reversible at 250 °C under 120 atm H2. Dehydrogenation at higher temperature, > 300 °C, produces a complex mixture of polyborane species. Solution phase 11B NMR spectra of the hydrolyzed decomposition products reveals the formation of the B3H8 anion, boric acid from hydrolysis of the unstable polyboranes (BnHx) (n = 3-11, x >8), and the closoborane B12H12 dianion as a minor product. A BH condensation mechanism involving metal hydride formation is proposed to explain the limited reversible hydrogen storage in magnesium borohydride.

  18. Impurity control and corrosion resistance of magnesium-aluminum alloy

    SciTech Connect

    Liu, M.; Song, GuangLing

    2013-01-01

    The corrosion resistance of magnesium alloys is very sensitive to the contents of impurity elements such as iron. In this study, a series of diecast AXJ530 magnesium alloy samples were prepared with additions of Mn and Fe. Through a comprehensive phase diagram calculation and corrosion evaluation, the mechanisms for the tolerance limit of Fe in magnesium alloy are discussed. This adds a new dimension to control the alloying impurity in terms of alloying composition design and casting conditions.

  19. Design Considerations of a Condensing System for Vaporized Magnesium

    NASA Technical Reports Server (NTRS)

    Witzke, Walter R; Prok, George M; Keller, Thomas A

    1955-01-01

    The effect of the design characteristics of various condensing chambers on magnesium build-up at the chamber inlet was investigated. The condensing chambers are used in the vapor-condensation process for making magnesium slurries. A complete description of the various chamber designs and the procedure used in testing the chambers is given. The results are evaluated on the basis of clogging and total magnesium distilled per run. Orifice design was also considered.

  20. Initial observations on using magnesium metal in peripheral nerve repair.

    PubMed

    Vennemeyer, J J; Hopkins, T; Hershcovitch, M; Little, K D; Hagen, M C; Minteer, D; Hom, D B; Marra, K; Pixley, S K

    2015-03-01

    Biodegradable magnesium metal filaments placed inside biodegradable nerve conduits might provide the physical guidance support needed to improve the rate and extent of regeneration of peripheral nerves across injury gaps. In this study, we examined basic issues of magnesium metal resorption and biocompatibility by repairing sub-critical size gap injuries (6 mm) in one sciatic nerve of 24 adult male Lewis rats. Separated nerve stumps were connected with poly(caprolactone) nerve conduits, with and without magnesium filaments (0.25 mm diameter, 10 mm length), with two different conduit filler substances (saline and keratin hydrogel). At 6 weeks after implantation, magnesium degradation was examined by micro-computed tomography and histological analyses. Magnesium degradation was significantly greater when the conduits were filled with an acidic keratin hydrogel than with saline (p < 0.05). But magnesium filaments in some animals remained intact for 6 weeks. Using histological and immunocytochemical analyses, good biocompatibility of the magnesium implants was observed at 6 weeks, as shown by good development of regenerating nerve mini-fascicles and only mild inflammation in tissues even after complete degradation of the magnesium. Nerve regeneration was not interrupted by complete magnesium degradation. An initial functional evaluation, determination of size recovery of the gastrocnemius muscle, showed a slight improvement due to magnesium with the saline but not the keratin filler, compared with respective control conduits without magnesium. These results suggest that magnesium filament implants have the potential to improve repair of injured peripheral nerve defects in this rodent model.

  1. Stability of Fe,Al-bearing bridgmanite in the lower mantle and synthesis of pure Fe-bridgmanite.

    PubMed

    Ismailova, Leyla; Bykova, Elena; Bykov, Maxim; Cerantola, Valerio; McCammon, Catherine; Boffa Ballaran, Tiziana; Bobrov, Andrei; Sinmyo, Ryosuke; Dubrovinskaia, Natalia; Glazyrin, Konstantin; Liermann, Hanns-Peter; Kupenko, Ilya; Hanfland, Michael; Prescher, Clemens; Prakapenka, Vitali; Svitlyk, Volodymyr; Dubrovinsky, Leonid

    2016-07-01

    The physical and chemical properties of Earth's mantle, as well as its dynamics and evolution, heavily depend on the phase composition of the region. On the basis of experiments in laser-heated diamond anvil cells, we demonstrate that Fe,Al-bearing bridgmanite (magnesium silicate perovskite) is stable to pressures over 120 GPa and temperatures above 3000 K. Ferric iron stabilizes Fe-rich bridgmanite such that we were able to synthesize pure iron bridgmanite at pressures between ~45 and 110 GPa. The compressibility of ferric iron-bearing bridgmanite is significantly different from any known bridgmanite, which has direct implications for the interpretation of seismic tomography data. PMID:27453945

  2. Stability of Fe,Al-bearing bridgmanite in the lower mantle and synthesis of pure Fe-bridgmanite

    PubMed Central

    Ismailova, Leyla; Bykova, Elena; Bykov, Maxim; Cerantola, Valerio; McCammon, Catherine; Boffa Ballaran, Tiziana; Bobrov, Andrei; Sinmyo, Ryosuke; Dubrovinskaia, Natalia; Glazyrin, Konstantin; Liermann, Hanns-Peter; Kupenko, Ilya; Hanfland, Michael; Prescher, Clemens; Prakapenka, Vitali; Svitlyk, Volodymyr; Dubrovinsky, Leonid

    2016-01-01

    The physical and chemical properties of Earth’s mantle, as well as its dynamics and evolution, heavily depend on the phase composition of the region. On the basis of experiments in laser-heated diamond anvil cells, we demonstrate that Fe,Al-bearing bridgmanite (magnesium silicate perovskite) is stable to pressures over 120 GPa and temperatures above 3000 K. Ferric iron stabilizes Fe-rich bridgmanite such that we were able to synthesize pure iron bridgmanite at pressures between ~45 and 110 GPa. The compressibility of ferric iron–bearing bridgmanite is significantly different from any known bridgmanite, which has direct implications for the interpretation of seismic tomography data. PMID:27453945

  3. Rechargeable Magnesium Batteries: Low-Cost Rechargeable Magnesium Batteries with High Energy Density

    SciTech Connect

    2010-10-01

    BEEST Project: Pellion Technologies is developing rechargeable magnesium batteries that would enable an EV to travel 3 times farther than it could using Li-ion batteries. Prototype magnesium batteries demonstrate excellent electrochemical behavior; delivering thousands of charge cycles with very little fade. Nevertheless, these prototypes have always stored too little energy to be commercially viable. Pellion Technologies is working to overcome this challenge by rapidly screening potential storage materials using proprietary, high-throughput computer models. To date, 12,000 materials have been identified and analyzed. The resulting best materials have been electrochemically tested, yielding several very promising candidates.

  4. Rapid recovery from major depression using magnesium treatment.

    PubMed

    Eby, George A; Eby, Karen L

    2006-01-01

    Major depression is a mood disorder characterized by a sense of inadequacy, despondency, decreased activity, pessimism, anhedonia and sadness where these symptoms severely disrupt and adversely affect the person's life, sometimes to such an extent that suicide is attempted or results. Antidepressant drugs are not always effective and some have been accused of causing an increased number of suicides particularly in young people. Magnesium deficiency is well known to produce neuropathologies. Only 16% of the magnesium found in whole wheat remains in refined flour, and magnesium has been removed from most drinking water supplies, setting a stage for human magnesium deficiency. Magnesium ions regulate calcium ion flow in neuronal calcium channels, helping to regulate neuronal nitric oxide production. In magnesium deficiency, neuronal requirements for magnesium may not be met, causing neuronal damage which could manifest as depression. Magnesium treatment is hypothesized to be effective in treating major depression resulting from intraneuronal magnesium deficits. These magnesium ion neuronal deficits may be induced by stress hormones, excessive dietary calcium as well as dietary deficiencies of magnesium. Case histories are presented showing rapid recovery (less than 7 days) from major depression using 125-300 mg of magnesium (as glycinate and taurinate) with each meal and at bedtime. Magnesium was found usually effective for treatment of depression in general use. Related and accompanying mental illnesses in these case histories including traumatic brain injury, headache, suicidal ideation, anxiety, irritability, insomnia, postpartum depression, cocaine, alcohol and tobacco abuse, hypersensitivity to calcium, short-term memory loss and IQ loss were also benefited. Dietary deficiencies of magnesium, coupled with excess calcium and stress may cause many cases of other related symptoms including agitation, anxiety, irritability, confusion, asthenia, sleeplessness

  5. Role of magnesium in alleviation of aluminium toxicity in plants.

    PubMed

    Bose, Jayakumar; Babourina, Olga; Rengel, Zed

    2011-04-01

    Magnesium is pivotal for activating a large number of enzymes; hence, magnesium plays an important role in numerous physiological and biochemical processes affecting plant growth and development. Magnesium can also ameliorate aluminium phytotoxicity, but literature reports on the dynamics of magnesium homeostasis upon exposure to aluminium are rare. Herein existing knowledge on the magnesium transport mechanisms and homeostasis maintenance in plant cells is critically reviewed. Even though overexpression of magnesium transporters can alleviate aluminium toxicity in plants, the mechanisms governing such alleviation remain obscure. Possible magnesium-dependent mechanisms include (i) better carbon partitioning from shoots to roots; (ii) increased synthesis and exudation of organic acid anions; (iii) enhanced acid phosphatase activity; (iv) maintenance of proton-ATPase activity and cytoplasmic pH regulation; (v) protection against an aluminium-induced cytosolic calcium increase; and (vi) protection against reactive oxygen species. Future research should concentrate on assessing aluminium toxicity and tolerance in plants with overexpressed or antisense magnesium transporters to increase understanding of the aluminium-magnesium interaction.

  6. Magnesium, aluminum and lead in various brain areas

    SciTech Connect

    Zumkley, H.; Bertram, H.P.; Brandt, M.; Roedig, M.; Spieker, C.

    1986-01-01

    Whereas the lead concentrations were increased in brain tissue of patients with chronic alcoholism, the aluminum concentrations remained within the normal range. The magnesium concentrations were found decreased in patients with chronic alcoholism compared to normal controls. The sources for the elevated lead levels seem to be the increased intake of alcohol. The decreased magnesium levels are probably caused by an increased loss of magnesium with the urine, malnutrition, malabsorption, hormonal factors and drugs. Various neurological disorders which often accompanied chronic alcoholism may be caused or aggravated by lead encephalopathy and hypomagnesemia. Therapeutical implications may be the early substitution of magnesium deficiency in chronic alcoholism. 10 references, 5 figures.

  7. Joint solubility of samarium and dysprosium in solid magnesium

    NASA Astrophysics Data System (ADS)

    Rokhlin, L. L.; Dobatkina, T. V.; Lukyanova, E. A.; Korolkova, I. G.; Tarytina, I. E.

    2016-03-01

    The phase compositions of solid Mg-Sm-Dy alloys corresponding to the magnesium-corner region of the phase diagram are studied by optical and scanning electron microscopy, electrical resistivity measurements, and electron microprobe analysis. The obtained results allowed us to determine the joint solubility of samarium and dysprosium in solid magnesium at 500, 400, and 300°C; it decreases with decreasing temperature. The magnesium solid solution is found to be in equilibrium only with the Mg41Sm5 and Mg24Dy5 compounds, which are in equilibrium with the magnesium solid solution in the binary Mg-Sm and Mg-Dy systems.

  8. Magnesium balances and /sup 28/Mg studies in man

    SciTech Connect

    Spencer, H.; Schwartz, R.; Osis, D.

    1988-01-01

    The intestinal absorption of magnesium was determined under strictly controlled dietary conditions in patients with normal renal function and also in patients with chronic renal failure. The average net absorption of magnesium of patients with normal renal function, expressed as percent of the magnesium intake, was 48.5%, while that of patients with chronic renal failure was significantly lower, 17%. Increasing the calcium intake from a low calcium intake of 200 mg/day to different higher intake levels up to 2000 mg/day did not change the magnesium balance nor the net absorption of magnesium of both types of patients. The lack of effect of the higher calcium intake on the absorption of magnesium was confirmed in /sup 28/Mg studies in which an oral dose of /sup 28/Mg, as the chloride, was given. The excretion of the absorbed magnesium into the intestine, the endogenous fecal magnesium, was low. Also, increasing the phosphorus intake up to 2000 mg/day in subjects with normal renal function did not affect the magnesium balance, regardless of the calcium intake.

  9. Improved biological performance of magnesium by micro-arc oxidation

    PubMed Central

    Ma, W.H.; Liu, Y.J.; Wang, W.; Zhang, Y.Z.

    2014-01-01

    Magnesium and its alloys have recently been used in the development of lightweight, biodegradable implant materials. However, the corrosion properties of magnesium limit its clinical application. The purpose of this study was to comprehensively evaluate the degradation behavior and biomechanical properties of magnesium materials treated with micro-arc oxidation (MAO), which is a new promising surface treatment for developing corrosion resistance in magnesium, and to provide a theoretical basis for its further optimization and clinical application. The degradation behavior of MAO-treated magnesium was studied systematically by immersion and electrochemical tests, and its biomechanical performance when exposed to simulated body fluids was evaluated by tensile tests. In addition, the cell toxicity of MAO-treated magnesium samples during the corrosion process was evaluated, and its biocompatibility was investigated under in vivo conditions. The results of this study showed that the oxide coating layers could elevate the corrosion potential of magnesium and reduce its degradation rate. In addition, the MAO-coated sample showed no cytotoxicity and more new bone was formed around it during in vivo degradation. MAO treatment could effectively enhance the corrosion resistance of the magnesium specimen and help to keep its original mechanical properties. The MAO-coated magnesium material had good cytocompatibility and biocompatibility. This technique has an advantage for developing novel implant materials and may potentially be used for future clinical applications. PMID:25517917

  10. Rapid recovery from major depression using magnesium treatment.

    PubMed

    Eby, George A; Eby, Karen L

    2006-01-01

    Major depression is a mood disorder characterized by a sense of inadequacy, despondency, decreased activity, pessimism, anhedonia and sadness where these symptoms severely disrupt and adversely affect the person's life, sometimes to such an extent that suicide is attempted or results. Antidepressant drugs are not always effective and some have been accused of causing an increased number of suicides particularly in young people. Magnesium deficiency is well known to produce neuropathologies. Only 16% of the magnesium found in whole wheat remains in refined flour, and magnesium has been removed from most drinking water supplies, setting a stage for human magnesium deficiency. Magnesium ions regulate calcium ion flow in neuronal calcium channels, helping to regulate neuronal nitric oxide production. In magnesium deficiency, neuronal requirements for magnesium may not be met, causing neuronal damage which could manifest as depression. Magnesium treatment is hypothesized to be effective in treating major depression resulting from intraneuronal magnesium deficits. These magnesium ion neuronal deficits may be induced by stress hormones, excessive dietary calcium as well as dietary deficiencies of magnesium. Case histories are presented showing rapid recovery (less than 7 days) from major depression using 125-300 mg of magnesium (as glycinate and taurinate) with each meal and at bedtime. Magnesium was found usually effective for treatment of depression in general use. Related and accompanying mental illnesses in these case histories including traumatic brain injury, headache, suicidal ideation, anxiety, irritability, insomnia, postpartum depression, cocaine, alcohol and tobacco abuse, hypersensitivity to calcium, short-term memory loss and IQ loss were also benefited. Dietary deficiencies of magnesium, coupled with excess calcium and stress may cause many cases of other related symptoms including agitation, anxiety, irritability, confusion, asthenia, sleeplessness

  11. In vitro and in vivo comparison of binary Mg alloys and pure Mg.

    PubMed

    Myrissa, Anastasia; Agha, Nezha Ahmad; Lu, Yiyi; Martinelli, Elisabeth; Eichler, Johannes; Szakács, Gábor; Kleinhans, Claudia; Willumeit-Römer, Regine; Schäfer, Ute; Weinberg, Annelie-Martina

    2016-04-01

    Biodegradable materials are under investigation due to their promising properties for biomedical applications as implant material. In the present study, two binary magnesium (Mg) alloys (Mg2Ag and Mg10Gd) and pure Mg (99.99%) were used in order to compare the degradation performance of the materials in in vitro to in vivo conditions. In vitro analysis of cell distribution and viability was performed on discs of pure Mg, Mg2Ag and Mg10Gd. The results verified viable pre-osteoblast cells on all three alloys and no obvious toxic effect within the first two weeks. The degradation rates in in vitro and in vivo conditions (Sprague-Dawley® rats) showed that the degradation rates differ especially in the 1st week of the experiments. While in vitro Mg2Ag displayed the fastest degradation rate, in vivo, Mg10Gd revealed the highest degradation rate. After four weeks of in vitro immersion tests, the degradation rate of Mg2Ag was significantly reduced and approached the values of pure Mg and Mg10Gd. Interestingly, after 4 weeks the estimated in vitro degradation rates approximate in vivo values. Our systematic experiment indicates that a correlation between in vitro and in vivo observations still has some limitations that have to be considered in order to perform representative in vitro experiments that display the in vivo situation.

  12. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies...

  13. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies...

  14. Improve efficiency of perovskite solar cells by using Magnesium doped ZnO and TiO2 compact layers

    NASA Astrophysics Data System (ADS)

    Baktash, Ardeshir; Amiri, Omid; Sasani, Alireza

    2016-05-01

    Here the effect of Magnesium doped TiO2 and ZnO as hole blocking layers (HBLs) are investigated by using solar cell capacitance simulator (SCAPS). The Impact of Magnesium concentration into the TiO2 and ZnO and effect of operating temperature on the performance of the perovskite solar cell are investigated. Best cell performance for both TiO2 and ZnO HBLs (with cell efficiencies of 19.86% and 19.57% respectively) are concluded for the doping level of 10% of Mg into the structure of HBLs. Increase in operating temperature from 300 K to 400 K are decreased the performance of the perovskite solar cell with both pure and Mg-doped HBLs. However, the cells with pure ZnO layer and with Zn0.9 Mg0.1O layer show the highest (with a decline of 8.88% in efficiency) and the lowest stability (with a decline of 50.49% in efficiency) at higher temperatures respectively. Moreover, the cell with Ti0.9 Mg0.1O2 layer shows better stability (with 21.85% reduction in efficiency) than the cell with pure TiO2 compact layer (with 23.28% reduction in efficiency) at higher operating temperatures.

  15. Influence of hydration state and homologue composition of magnesium stearate on the physical chemical properties of liquid paraffin lipogels.

    PubMed

    Sheikh, K A; Kang, Y B; Rouse, J J; Eccleston, G M

    2011-06-15

    Lipogels were prepared by dispersing mixed (60:40 C(16)-C(18)) and pure (C(18)) homologue magnesium stearate (MgSt) in liquid paraffin, using three methods of preparation, i.e. addition of water at 95 °C during cooling cycle (method 1), homogenisation upon cooling (method 2) or cooling without addition of water or homogenisation (method 3). The systems were characterised by physical inspection, polarised, hot stage and scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheology, and X-ray diffraction (XRD). Systems formed stable semisolid lipogels (no syneresis), unstable solids showing syneresis or structured fluids, depending on the type of magnesium stearate used and the preparation technique. The stable semisolid lipogels containing mixed homologue MgSt (commercial-as received, anhydrous or dihydrate) prepared by methods 1 (∼ 1-2% water) and 2 contained α-crystalline lamellar structure. These were not present in the unstable solids formed with method 3 or in systems prepared from pure homologue MgSt which were generally structured fluids rather than semisolids. In addition, semisolid lipogels of pure homologue trihydrate MgSt prepared by method 3 showed plate-like crystals, implying pressure sensitivity. There is significantly more amorphous MgSt in the unstable solids compared to the stable semisolid lipogels, which are mainly crystalline (confirmed by XRD). PMID:21457766

  16. Influence of hydration state and homologue composition of magnesium stearate on the physical chemical properties of liquid paraffin lipogels.

    PubMed

    Sheikh, K A; Kang, Y B; Rouse, J J; Eccleston, G M

    2011-06-15

    Lipogels were prepared by dispersing mixed (60:40 C(16)-C(18)) and pure (C(18)) homologue magnesium stearate (MgSt) in liquid paraffin, using three methods of preparation, i.e. addition of water at 95 °C during cooling cycle (method 1), homogenisation upon cooling (method 2) or cooling without addition of water or homogenisation (method 3). The systems were characterised by physical inspection, polarised, hot stage and scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheology, and X-ray diffraction (XRD). Systems formed stable semisolid lipogels (no syneresis), unstable solids showing syneresis or structured fluids, depending on the type of magnesium stearate used and the preparation technique. The stable semisolid lipogels containing mixed homologue MgSt (commercial-as received, anhydrous or dihydrate) prepared by methods 1 (∼ 1-2% water) and 2 contained α-crystalline lamellar structure. These were not present in the unstable solids formed with method 3 or in systems prepared from pure homologue MgSt which were generally structured fluids rather than semisolids. In addition, semisolid lipogels of pure homologue trihydrate MgSt prepared by method 3 showed plate-like crystals, implying pressure sensitivity. There is significantly more amorphous MgSt in the unstable solids compared to the stable semisolid lipogels, which are mainly crystalline (confirmed by XRD).

  17. Engineering arbitrary pure and mixed quantum states

    SciTech Connect

    Pechen, Alexander

    2011-10-15

    Controlled manipulation by atomic- and molecular-scale quantum systems has attracted a lot of research attention in recent years. A fundamental problem is to provide deterministic methods for controlled engineering of arbitrary quantum states. This work proposes a deterministic method for engineering arbitrary pure and mixed states of a wide class of quantum systems. The method exploits a special combination of incoherent and coherent controls (incoherent and coherent radiation) and has two properties which are specifically important for manipulating by quantum systems: it realizes the strongest possible degree of their state control, complete density matrix controllability, meaning the ability to steer arbitrary pure and mixed initial states into any desired pure or mixed final state, and it is all-to-one, such that each particular control transfers all initial system states into one target state.

  18. SON68 glass dissolution driven by magnesium silicate precipitation

    NASA Astrophysics Data System (ADS)

    Fleury, Benjamin; Godon, Nicole; Ayral, André; Gin, Stéphane

    2013-11-01

    important to note that the glass alteration rate is not the limiting factor, since it can increase if the gel dissolves faster.Thien et al. [29] also described experiments in which AVM6 and AVM10 glass were leached in synthetic groundwater containing 9.9 × 10-3 mol L-1 (396.8 mg L-1) of Ca and 4.1 × 10-3 mol L-1 (99.7 mg L-1) of Mg. For AVM10 glass no precipitation of a magnesium phase occurred, and the Ca from solution was incorporated in the gel to replace Mg released into solution. The pH at 50 °C was near 8 in this experiment, a value that inhibited the formation of the magnesium phase; this is consistent with the conclusions of the experiments at pH 8 in our study. For AVM6 glass, Thien reported that Ca from solution was incorporated in the gel, making the gel more protective, whereas Mg precipitated in a secondary phase that increased glass alteration. Glass alteration was finally slower for AVM6 altered in groundwater than in pure water. This can be attributed to a low pH (8.2-8.5) which limited the precipitation of the magnesium phase, which in turn required less silicon. Glass alteration was therefore relatively unaffected by this precipitation; the alteration rate diminished because the increased Ca content in the gel enhanced its passivating effect.More recently, Utton et al. also pointed out the dual effect of magnesium because the presence of MgO seems to be beneficial for the chemical durability of Magnox glasses even if magnesium precipitates in the secondary phases [38].

  19. Pure neuritic leprosy: Current status and relevance.

    PubMed

    Rao, P Narasimha; Suneetha, Sujai

    2016-01-01

    Pure neuritic leprosy has always been an enigma due to its clinical and management ambiguities. Although only the Indian Association of Leprologist's classification recognizes 'pure neuritic leprosy' as a distinct sub group of leprosy, cases nonetheless are reported from various countries of Asia, Africa, South America and Europe, indicating its global relevance. It is important to maintain pure neuritic leprosy as a subgroup as it constitutes a good percentage of leprosy cases reported from India, which contributes to more than half of global leprosy numbers. Unfortunately, a high proportion of these patients present with Grade 2 disability at the time of initial reporting itself due to the early nerve involvement. Although skin lesions are absent by definition, when skin biopsies were performed from the skin along the distribution of the affected nerve, a proportion of patients demonstrated leprosy pathology, revealing sub-clinical skin involvement. In addition on follow-up, skin lesions are noted to develop in up to 20% of pure neuritic leprosy cases, indicating its progression to manifest cutaneous disease. Over the decades, the confirmation of diagnosis of pure neuritic leprosy has been subjective, however, with the arrival and use of high-resolution ultrasonography (HRUS) for nerve imaging, we have a tool not only to objectively measure and record the nerve thickening but also to assess the morphological alterations in the nerve including echo texture, fascicular pattern and vascularity. Management of pure neuritic leprosy requires multidrug therapy along with appropriate dose of systemic corticosteroids, for both acute and silent neuritis. Measures for pain relief, self-care of limbs and physiotherapy are important to prevent as well as manage disabilities in this group of patients. PMID:27088926

  20. Pure Apraxia of Speech - A Case Report -

    PubMed Central

    Kang, Young Ae; Yun, Sang Jin

    2011-01-01

    Apraxia of speech (AOS) is the impairment of motor programming. However, the exact nature of this deficit remains unclear. In particular, AOS without other speech-language deficit is called pure AOS, but it is very rare. When diagnosing AOS, the characteristic of articulation is considered a crucial criterion, which has been proposed for differentiating AOS from phonological and dysarthric disorders. The present study reports on pure AOS in a 37-year-old right-handed male after a left insular, front, temporal infarction. This report may be useful for further AOS study and diagnosis in the clinical setting. PMID:22506197

  1. BRST and the pure spinor formalism

    SciTech Connect

    Garcia, J. Antonio

    2008-03-06

    The aim of this talk is to show the relation between the standard BRST approach of the GS superstring with the quantization technics used in the pure spinor approach to superstring. To that end we will use the Batalin-Fradkin-Tyutin (BFT) conversion program of second class constraints to first class constraints in the GS superstring using light cone coordinates. By applying this systematic procedure we were able to obtain a gauge system that is equivalent to the recent model proposed in [1] to relate the GS superstring to the pure spinor formalism.

  2. Ignition and Combustion Characteristics of Pure Bulk Metals: Normal-Gravity Test Results

    NASA Technical Reports Server (NTRS)

    Abbud-Madrid, A.; Fiechtner, G. J.; Branch, M. C.; Daily, J. W.

    1994-01-01

    An experimental apparatus has been designed for the study of bulk metal ignition under elevated, normal and reduced gravity environments. The present work describes the technical characteristics of the system, the analytical techniques employed, the results obtained from the ignition of a variety of metals subjected to normal gravity conditions and the first results obtained from experiments under elevated gravity. A 1000 W xenon short-arc lamp is used to irradiate the top surface of a cylindrical metal specimen 4 mm in diameter and 4 mm high in a quiescent pure-oxygen environment at 0.1 MPa. Iron, titanium, zirconium, magnesium, zinc, tin, and copper specimens are investigated. All these metals exhibit ignition and combustion behavior varying in strength and speed. Values of ignition temperatures below, above or in the range of the metal melting point are obtained from the temperature records. The emission spectra from the magnesium-oxygen gas-phase reaction reveals the dynamic evolution of the ignition event. Scanning electron microscope and x-ray spectroscopic analysis provide the sequence of oxide formation on the burning of copper samples. Preliminary results on the effect of higher-than-normal gravity levels on the ignition of titanium specimens is presented.

  3. Use of magnesium as a drug in chronic kidney disease

    PubMed Central

    Wilkie, Martin

    2012-01-01

    From chronic kidney disease (CKD) Stage 4 onwards, phosphate binders are needed in many patients to prevent the development of hyperphosphataemia, which can result in disturbed bone and mineral metabolism, cardiovascular disease and secondary hyperparathyroidism. In this review, we re-examine the use of magnesium-containing phosphate binders for patients with CKD, particularly as their use circumvents problems such as calcium loading, aluminum toxicity and the high costs associated with other agents of this class. The use of magnesium hydroxide in the 1980s has been superseded by magnesium carbonate, as the hydroxide salt was associated with poor gastrointestinal tolerability, whereas studies with magnesium carbonate show much better gastrointestinal profiles. The use of combined magnesium- and calcium-based phosphate binder regimens allows a reduction in the calcium load, and magnesium and calcium regimen comparisons show that magnesium may be as effective a phosphate binder as calcium. A large well-designed trial has recently shown that a drug combining calcium acetate and magnesium carbonate was non-inferior in terms of lowering serum phosphate to sevelamer-HCl and had an equally good tolerability profile. Because of the high cost of sevelamer and lanthanum carbonate, the use of magnesium carbonate could be advantageous and drug acquisition cost savings would compensate for the cost of introducing routine magnesium monitoring, if this is thought to be necessary and not performed anyway. Moreover, given the potential cost savings, it may be time to re-investigate magnesium-containing phosphate binders for CKD patients with further well-designed clinical research using vascular end points. PMID:26069822

  4. Oral administration of lithium increases tissue magnesium contents but not plasma magnesium level in rats.

    PubMed

    Kiełczykowska, Małgorzata; Musik, Irena; Hordyjewska, Anna; Boguszewska, Anna; Lewandowska, Anna; Pasternak, Kazimierz

    2007-01-01

    The aim of this work was to determine the influence of different doses of lithium on magnesium concentration in plasma and tissues of rats. For a period of eight weeks rats had been provided with aqueous solutions of Li(2)CO(3) whose concentrations were established as follows: 0.7; 1.4; 2.6; 3.6; 7.1; 10.7 mmol Li(+)/l. Magnesium concentration was determined in plasma and tissue supernatants. Lithium caused no changes in magnesium concentration in plasma, whereas Mg concentration in tissues was found to be enhanced, although the degree of the increment depended on the studied tissue. In the liver, brain and heart muscle, the increase was statistically insignificant vs. control. In the kidney, the higher Li doses were required to result in the significant Mg enhancement, whereas in femoral muscle all the used doses caused well-marked Mg increase vs. control. Positive correlations between average daily Li intake and tissue Mg concentration in the kidney (r = 0.650) and femoral muscle (r = 0.696) were found. In conclusion, the present study indicates that the different Li doses disturbed tissue homeostasis of magnesium. The increase in Mg tissue concentration, observed in groups receiving higher Li doses can influence nervous-muscular excitability.

  5. Magnesium and metabolic syndrome: The role of magnesium in health and disease

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Metabolic syndrome is a constellation of conditions associated with elevated risk of diabetes and cardiovascular disease. Magnesium, the fourth most abundant cation in the human body and required in over 300 enzymatic reactions, has been shown in experimental, observational, and clinical studies to ...

  6. Calcium magnesium acetate production and cost reduction

    SciTech Connect

    Leuschner, A.P.

    1988-02-01

    The New York State Energy Research and Development Authority (Energy Authority), Consolidated Edison Company of New York, Inc. (ConEd), the New York State Department of Transportation (NYSDOT), the New York State Thruway Authority (NYSTA), Chevron Chemical Company, the National Corn Growers Association (NCGA), and the Massachusetts Department of Public Works (MDPW) sponsored a research program to develop technology capable of producing Calcium Magnesium Acetate (CMA), an alternative road deicer, at a quality and cost which will allow its increased use. The objectives of this program were to determine the feasibility of: (1) producing CMA from regionally available waste and low grade organic feedstocks via biochemical engineering technologies; (2) operating the fermentation at concentrated product levels to reduce energy requirements and minimize drying process costs; (3) using this production approach to produce an environmentally acceptable CMA product; and (4) using and adapting an existing facility for a CMA commercial demonstration plant. The experimental program included:(1) selection of microorganisms for their ability to grow in the absence of sodium chloride and to tolerate high concentrations of calcium, magnesium, and acetate ions; (2) analysis of waste feedstocks for their potential conversion to acetate; (3) analysis of waste organic material for impurities in CMA that could carry over into the environment; (4) batch experiments to determine pH tolerance, growth in the absence of sodium chloride (NaCl), tolerance to magnesium, calcium and acetate ions, effect of substrate concentration, acid distribution, and acid production; and (5) semi-continuous laboratory scale anaerobic digestion experiments to determine loading rates, conversion efficiencies, and other design data. 67 refs., 33 figs., 66 tabs.

  7. Comparative angioprotective effects of magnesium compounds.

    PubMed

    Kharitonova, Maria; Iezhitsa, Igor; Zheltova, Anastasia; Ozerov, Alexander; Spasov, Alexander; Skalny, Anatoly

    2015-01-01

    Magnesium (Mg) deficiency is implicated in the development of numerous disorders of the cardiovascular system. Moreover, the data regarding the efficacy of different magnesium compounds in the correction of impaired functions due to low magnesium intake are often fragmentary and inconsistent. The aim of this study was to compare the effects of the most bioavailable Mg compounds (Mg l-aspartate, Mg N-acetyltaurate, Mg chloride, Mg sulphate and Mg oxybutyrate) on systemic inflammation and endothelial dysfunction in rats fed a low Mg diet for 74 days. A low Mg diet decreased the Mg concentration in the plasma and erythrocytes, which was accompanied by a reduced concentration of eNOs and increased levels of endothelin-1 level in the serum and impaired endothelium-dependent vasodilatation. These effects increased the concentration of proinflammatory molecules, such as VCAM-1, TNF-α, IL-6 and CRP, indicating the development of systemic inflammation and endothelial dysfunction. The increased total NO level, which estimated from the sum of the nitrate and nitrite concentrations in the serum, may also be considered to be a proinflammatory marker. Two weeks of Mg supplementation partially or fully normalised the ability of the vascular wall to effect adequate endothelium-dependent vasodilatation and reversed the levels of most endothelial dysfunction and inflammatory markers (except CRP) to the mean values of the control group. Mg sulphate had the smallest effect on the endothelin-1, TNF-α and VCAM-1 levels. Mg N-acetyltaurate was significantly more effective in restoring the level of eNOS compared to all other studied compounds, except for Mg oxybutyrate. Taken together, the present findings demonstrate that all Mg compounds equally alleviate endothelial dysfunction and inflammation caused by Mg deficiency. Mg sulphate tended to be the least effective compound.

  8. Pure agraphia after deep left hemisphere haematoma.

    PubMed Central

    Croisile, B; Laurent, B; Michel, D; Trillet, M

    1990-01-01

    Pure agraphia is reported following haematoma in the left centrum semiovale sparing both parietal and frontal cortices. There was total inability to produce graphemes in the absence of limb apraxia. The lesion is assumed to have prevented linguistic and graphemic systems from gaining access to the frontal motor programme. Images PMID:2324759

  9. A fatal case of pure metaphyseal chondroblastoma.

    PubMed

    Binesh, Fariba; Moghadam, Reza Nafisi; Abrisham, Jalil

    2013-08-23

    The chondroblastoma (CB) is a rare cartilaginous tumour; it represents less than 1% of all bone tumours. It is mostly localised at the level of the epiphysis of long bones. We report a fatal case of pure metaphyseal CB of the tibia in a 9-year-old boy whose pulmonary metastases developed soon after operative therapy of the primary tumour.

  10. Temporal Ventriloquism in a Purely Temporal Context

    ERIC Educational Resources Information Center

    Hartcher-O'Brien, Jessica; Alais, David

    2011-01-01

    This study examines how audiovisual signals are combined in time for a temporal analogue of the ventriloquist effect in a purely temporal context, that is, no spatial grounding of signals or other spatial facilitation. Observers were presented with two successive intervals, each defined by a 1250-ms tone, and indicated in which interval a brief…

  11. Pure progressive amnesia: An atypical amnestic syndrome?

    PubMed

    Barbeau, Emmanuel J; Didic, Mira; Felician, Olivier; Tramoni, Eve; Guedj, Eric; Ceccaldi, Mathieu; Poncet, Michel

    2006-12-01

    We report on M.S., an 83-year-old patient with isolated pure progressive amnesia. This rare, recently identified, form of amnesia has been described in elderly patients. Neuropathological studies suggest that this syndrome is an atypical clinical presentation of Alzheimer's disease. The aim of our study was to characterize the neuropsychological pattern of pure progressive amnesia in comparison with other amnestic syndromes and memory dissociations reported in the literature. Our results indicate that pure progressive amnesia is characterized by a highly unusual dissociation in the realm of memory, with severe deficits on tests based on recognition and recall of verbal and visual single items, contrasting with relatively preserved anterograde autobiographical and spatial memory and normal recall of complex material such as stories. These findings suggest that memory for single items could depend on an independent system. One hypothesis is that M.S.'s unusual memory profile results from relative dysfunction of the ventral medial temporal lobe pathway. An alternative explanation implicates cognitive reserve. Further studies are required in order to progress on this matter. In any case, pure progressive amnesia is a clinical syndrome that may provide further insight into the organization of declarative memory.

  12. A fatal case of pure metaphyseal chondroblastoma.

    PubMed

    Binesh, Fariba; Moghadam, Reza Nafisi; Abrisham, Jalil

    2013-01-01

    The chondroblastoma (CB) is a rare cartilaginous tumour; it represents less than 1% of all bone tumours. It is mostly localised at the level of the epiphysis of long bones. We report a fatal case of pure metaphyseal CB of the tibia in a 9-year-old boy whose pulmonary metastases developed soon after operative therapy of the primary tumour. PMID:23975916

  13. Implicit Reading in Chinese Pure Alexia

    ERIC Educational Resources Information Center

    Shan, Chunlei; Zhu, Renjing; Xu, Mingwei; Luo, Benyan; Weng, Xuchu

    2010-01-01

    A number of recent studies have shown that some patients with pure alexia display evidence of implicit access to lexical and semantic information about words that they cannot read explicitly. This phenomenon has not been investigated systematically in Chinese patients. We report here a case study of a Chinese patient who met the criteria for pure…

  14. Pure science and the problem of progress.

    PubMed

    Douglas, Heather

    2014-06-01

    How should we understand scientific progress? Kuhn famously discussed science as its own internally driven venture, structured by paradigms. He also famously had a problem describing progress in science, as problem-solving ability failed to provide a clear rubric across paradigm change--paradigm changes tossed out problems as well as solving them. I argue here that much of Kuhn's inability to articulate a clear view of scientific progress stems from his focus on pure science and a neglect of applied science. I trace the history of the distinction between pure and applied science, showing how the distinction came about, the rhetorical uses to which the distinction has been put, and how pure science came to be both more valued by scientists and philosophers. I argue that the distinction between pure and applied science does not stand up to philosophical scrutiny, and that once we relinquish it, we can provide Kuhn with a clear sense of scientific progress. It is not one, though, that will ultimately prove acceptable. For that, societal evaluations of scientific work are needed.

  15. A Pure Theory of Lifelong Learning.

    ERIC Educational Resources Information Center

    Hatton, Michael J.

    Charles Tiebout's Pure Theory of Local Expenditures serves as a helpful framework in examining the emergence of the learning society, communications technologies, freer trade, and the effects these will have on the educational infrastructure. Tiebout argued that the failure of market-type systems of public good at the central government level does…

  16. Exploring the simplest purely baryonic decay processes

    NASA Astrophysics Data System (ADS)

    Geng, C. Q.; Hsiao, Y. K.; Rodrigues, Eduardo

    2016-07-01

    Though not considered in general, purely baryonic decays could shed light on the puzzle of the baryon number asymmetry in the universe by means of a better understanding of the baryonic nature of our matter world. As such, they constitute a yet unexplored class of decay processes worth investigating. We propose to search for purely baryonic decay processes at the LHCb experiment. No such type of decay has ever been observed. In particular, we concentrate on the decay Λb0→p p ¯n , which is the simplest purely baryonic decay mode, with solely spin-1 /2 baryons involved. We predict its decay branching ratio to be B (Λb0→p p ¯ n )=(2. 0-0.2+0.3)×10-6 , which is sufficiently large to make the decay mode accessible to LHCb. Our study can be extended to other purely baryonic decays such as Λb0→p p ¯ Λ , Λb0→Λ p ¯ Λ , and Λb0→Λ Λ ¯Λ , as well as to similar decays of antitriplet b baryons such as Ξb0 ,-.

  17. Fabrication of faceted nanopores in magnesium

    SciTech Connect

    Wu, Shujing; Cao, Fan; Zheng, He; Sheng, Huaping; Liu, Chun; Liu, Yu; Zhao, Dongshan; Wang, Jianbo

    2013-12-09

    In this paper, using high resolution transmission electron microscopy, we showed the fabrication of faceted nanopores with various shapes in magnesium by focused electron beam (e-beam). The characteristics of nanopore shapes and the crystallographic planes corresponding to the edges of the nanopores were discussed in detail. Interestingly, by manipulating the e-beam (e.g., irradiation direction and duration), the nanopore shape and size could be effectively controlled along different directions. Our results provide important insight into the nanopore patterning in metallic materials and are of fundamental importance concerning the relevant applications, such as nanopore-based sensor, etc.

  18. 75 FR 34689 - Pure Magnesium From the People's Republic of China: Preliminary Results of the 2008-2009...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-18

    ... Russian Federation, 60 FR 25691 (May 12, 1995). \\2\\ See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 74 FR 20278 (May 1, 2009... Revocation in Part. 74 FR 30052 (June 24, 2009). On August 3, 2009, Trade Bridge, counsel for TXR and...

  19. 78 FR 34646 - Pure Magnesium from the People's Republic of China: Preliminary Results of 2011-2012 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-10

    ... Economy Antidumping Proceedings: Assessment of Antidumping Duties, 76 FR 65694, 65694-95 (October 24, 2011... and New Shipper Reviews, and Final Rescission of New Shipper Review, 65 FR 20948 (April 19, 2000), and... Fourth Antidumping Duty Administrative Review, 69 FR 54635 (September 9, 2004), and accompanying IDM...

  20. 77 FR 63787 - Pure Magnesium in Granular Form from the People's Republic of China: Continuation of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... (``the Act'').\\1\\ \\1\\ See Initiation of Five-Year (``Sunset'') Review, 77 FR 4995 (February 1, 2012... Antidumping Duty Order, 77 FR 33165 (June 5, 2012). On October 1, 2012, the ITC published its determination.... No. 731-TA- 895 (Second Review)), 77 FR 59979 (October 1, 2012). Scope of the Order There is...

  1. 76 FR 70709 - Pure Magnesium From the People's Republic of China: Second Extension of Time for the Final...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-15

    ... Antidumping Duty Administrative Review, 76 FR 33194 (June 8, 2011). On September 16, 2011, the Department... Final Results of the Antidumping Duty Administrative Review, 76 FR 59111 (September 23, 2011). Extension... INFORMATION CONTACT: Eve Wang, AD/CVD Operations, Office 8, Import Administration, International...

  2. 76 FR 59111 - Pure Magnesium From the People's Republic of China: Extension of Time for the Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ... Antidumping Duty Administrative Review, 76 FR 33194 (June 8, 2011). The final results of review are currently... Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005). Accordingly... INFORMATION CONTACT: Eve Wang, AD/CVD Operations, Office 8, Import Administration, International...

  3. 76 FR 1403 - Pure Magnesium From the People's Republic of China: Extension of Time Limit for the Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... Investigation; Opportunity To Request Administrative Review, 75 FR 23236 (May 3, 2010). Respondent, Tianjin... Requests for Revocation In Part, 75 FR 37759 (June 30, 2010). Currently, the preliminary results of..., 2011. FOR FURTHER INFORMATION CONTACT: Eve Wang, AD/CVD Operations, Office 8, Import...

  4. 76 FR 76945 - Pure Magnesium From the People's Republic of China: Final Results of the 2009-2010 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... Duty Administrative Review, 76 FR 33194 (June 8, 2011) (``Preliminary Results''). DATES: Effective Date...- Market Economies: Valuing the Factor of Production: Labor, 76 FR 36092 (June 21, 2011) (``Labor... China; Extension of Time for the Final Results of the Antidumping Duty Administrative Review, 76...

  5. 75 FR 80791 - Pure Magnesium From the People's Republic of China: Final Results of the 2008-2009 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-23

    ... Republic of China: Preliminary Results of the 2008-2009 Antidumping Duty Administrative Review, 75 FR 34689 (June 18, 2010) (``Preliminary Results''). \\2\\ See Preliminary Results, at 75 FR at 34692. DATES... Time for the Final Results of the Antidumping Duty Administrative Review, 75 FR 63440 (October 15,...

  6. 76 FR 62091 - Pure Magnesium From China; Scheduling of an Expedited Five-Year Review Concerning the Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-06

    ... institution (76 FR 31635, June 1, 2011) of the subject five-year review was adequate and that the respondent... Commission's rules, as amended, 67 FR 68036 (November 8, 2002). Even where electronic filing of a document is... Handbook on Electronic Filing Procedures, 67 FR 68168, 68173 (November 8, 2002). \\3\\ The Commission...

  7. Magnesium sulfate protects fetal skin from intrauterine ischemia reperfusion injury.

    PubMed

    Kaptanoglu, Asli F; Arca, Turkan; Kilinc, Kamer

    2012-09-01

    Intrauterine ischemia-reperfusion (I/R) injury in fetus occurs with multifactorial pathogenesis and results with multiorgan injury including skin. Magnesium has widespread use in obstetric practice. Inn addition to magnesium's tocolytic and neuroprotective properties, it also has free radical reducing effects. The aim of the present study was to demonstrate whether magnesium sulfate could have protective effect on fetal rat skin in intrauterine ischemia-reperfusion (I/R) injury. Fetal skin ischemia was induced by clamping the utero-ovarian arteries bilaterally for 30 min, and reperfusion was achieved by removing the clamps for 60 min in 19-day pregnant rats. Magnesium Sulfate (MgSO(4)) was given to pregnant rats 20 min before I/R injury at the dose of 600 mg/kg in magnesium treatment group. No ischemia reperfusion was applied to control and sham-operated groups. Lipid peroxidation from the skin tissues was determined as thiobarbituric acid reactive substances (TBARS). Myeloperoxidase (MPO) activity was determined for neutrophil activation. The results showed that the levels of TBARS and MPO increased significantly in the fetal rat skin after I/R injury compared to control group. Levels of TBARS and MPO were significantly lower than those of I/R group in Magnesium-treated group. In conclusion, intrauterine ischemia-reperfusion may produce considerable fetal skin injury. Increased TBARS and MPO activity can be inhibited by magnesium treatment. This suggests that magnesium treatment may have protective effect on fetal rat skin in intrauterine I/R injury.

  8. Casting Porosity-Free Grain Refined Magnesium Alloys

    SciTech Connect

    Schwam, David

    2013-08-12

    The objective of this project was to identify the root causes for micro-porosity in magnesium alloy castings and recommend remedies that can be implemented in production. The findings confirm the key role played by utilizing optimal gating and risering practices in minimizing porosity in magnesium castings. 

  9. Magnesium and diltiazem relaxes phenylephrine-precontracted rat aortic rings

    PubMed Central

    Dogan, Mustafa; Peker, Recep O.; Donmez, Soner; Gokalp, Osman

    2012-01-01

    Perioperative vasospasm during cardiovascular surgery is a challenging problem. Several vasodilator agents are frequently utilized for its prevention in surgical practice. Magnesium and diltiazem both have known potential vasorelaxant effects. We planned to compare the efficacy of diltiazem and magnesium in relieving phenylephrine-precontracted rat aortic rings. Ten young adult female Wistar albino rats weighing 230–260 g were used in this study. The aortic rings in the organ bath equilibrated and reached their baseline tension. Precontraction was induced by 0.001 mmol/l phenylephrine and cumulative concentration–relaxation curves were obtained by consecutively increasing the addition of either diltiazem (10−6-0.1 mmol/l) or magnesium (0.1–10 mmol/l). The mean maximal relaxation responses observed by diltiazem and magnesium on separate aortic rings were 90 ± 3 and 53 ± 2%, respectively. The calculated EC50 of diltiazem was 0.01035 mmol/l, whereas the EC50 of magnesium was 4.064 mmol/l (P < 0.05). Both magnesium and diltiazem produced vasorelaxation on phenylephrine-precontracted rat aortic rings in this study, but the potency of diltiazem regarding the EC50 value was significantly higher than that of magnesium. Magnesium could be a candidate together with diltiazem to inhibit vasospasm on arterial grafts during coronary bypass surgery. PMID:22523136

  10. 75 FR 9252 - Magnesium From China and Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-01

    ... magnesium (also known as magnesium metal) from China and Russia (70 FR 19928-19931). The Commission is... 207), as most recently amended at 74 FR 2847 (January 16, 2009). \\1\\ No response to this request for... employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 73 FR 24609...

  11. 75 FR 35086 - Magnesium From China and Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... group responses to its notice of institution (75 FR 9252, March 1, 2010) were adequate.\\1\\ A record of... COMMISSION Magnesium From China and Russia AGENCY: United States International Trade Commission. ACTION... orders on magnesium from China and Russia. SUMMARY: The Commission hereby gives notice that it...

  12. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  13. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  14. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  15. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  16. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  17. Fogging technique used to coat magnesium with plastic

    NASA Technical Reports Server (NTRS)

    Mroz, T. S.

    1967-01-01

    Cleaning process and a fogging technique facilitate the application of a plastic coating to magnesium plates. The cleaning process removes general organic and inorganic surface impurities, oils and greases, and oxides and carbonates from the magnesium surfaces. The fogging technique produces a thin-filmlike coating in a clean room atmosphere.

  18. Precipitation of plutonium from acidic solutions using magnesium oxide

    SciTech Connect

    Jones, S.A.

    1994-12-05

    Magnesium oxide will be used as a neutralizing agent for acidic plutonium-containing solutions. It is expected that as the magnesium oxide dissolves, the pH of the solution will rise, and plutonium will precipitate. The resulting solid will be tested for suitability to storage. The liquid is expected to contain plutonium levels that meet disposal limit requirements.

  19. Adsorption of oxygen and 1-butene on magnesium ferrite

    SciTech Connect

    Samuilova, O.K.; Kozlova, M.M.; Yagodovskii, V.D.

    1986-08-01

    The kinetics of the adsorption of oxygen and 1-butene on magnesium ferrite was studied. Conductometry and thermal desorption methods were used to investigate the adsorption of oxygen on magnesium ferrite. Two forms of adsorbed oxygen were found. The formation of these forms affects the kinetics of the adsorption of 1-butene.

  20. Tuning open-circuit voltage in organic solar cells by magnesium modified Alq3

    PubMed Central

    Chou, Chi-Ta; Lin, Chien-Hung; Wu, Meng-Hsiu; Cheng, Tzu-Wei; Lee, Jiun-Haw; Liu, Chin-Hsin J.; Tai, Yian; Chattopadhyay, Surojit; Wang, Juen-Kai; Chen, Kuei-Hsien; Chen, Li-Chyong

    2011-01-01

    The low molecular weight tris-(8-hydroxyquinoline) aluminum (Alq3) has been incorporated with magnesium (Mg) that altered the nature of its opto-electronic characteristics. The lowering of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) in Mg:Alq3, compared to pure Alq3, creates a stronger field (exceeding the exciton binding energy) at the donor-acceptor junction to dissociate the photo-generated exciton and also provides a low barrier for electron transport across the device. In an electron-only device (described in the text), a current enhancement in excess of 103, with respect to pure Alq3, could be observed at 10 V applied bias. Optimized Mg:Alq3 layer, when introduced in the photovoltaic device, improves the power conversion efficiencies significantly to 0.15% compared to the pure Alq3 device. The improvement in the photovoltaic performance has been attributed to the superior exciton dissociation and carrier transport. PMID:22087050

  1. Biodegradable resistive switching memory based on magnesium difluoride.

    PubMed

    Zhang, Zhiping; Tsang, Melissa; Chen, I-Wei

    2016-08-11

    This study presents a new type of resistive switching memory device that can be used in biodegradable electronic applications. The biodegradable device features magnesium difluoride as the active layer and iron and magnesium as the corresponding electrodes. This is the first report on magnesium difluoride as a resistive switching layer. With on-off ratios larger than one hundred, the device on silicon switches at voltages less than one volt and requires only sub-mA programming current. AC endurance of 10(3) cycles is demonstrated with ±1 V voltage pulses. The switching mechanism is attributed to the formation and rupture of conductive filaments comprising fluoride vacancies in magnesium difluoride. Devices fabricated on a flexible polyethylene terephthalate substrate are tested for functionality, and degradation is subsequently demonstrated in de-ionized water. An additional layer of magnesium difluoride is used to hinder the degradation and extend the lifetime of the device. PMID:27476796

  2. Thermal Stability of Magnesium Silicide/Nickel Contacts

    NASA Astrophysics Data System (ADS)

    de Boor, J.; Droste, D.; Schneider, C.; Janek, J.; Mueller, E.

    2016-06-01

    Magnesium silicide-based materials are a very promising class of thermoelectric materials with excellent potential for thermoelectric waste heat recovery. For the successful application of magnesium silicide-based thermoelectric generators, the development of long-term stable contacts with low contact resistance is as important as material optimization. We have therefore studied the suitability of Ni as a contact material for magnesium silicide. Co-sintering of magnesium silicide and Ni leads to the formation of a stable reaction layer with low electrical resistance. In this paper we show that the contacts retain their low electrical contact resistance after annealing at temperatures up to 823 K for up to 168 h. By employing scanning electron microscope analysis and time-of-flight (ToF)-secondary ion mass spectrometry, we can further show that elemental diffusion is occurring to a very limited extent. This indicates long-term stability under practical operation conditions for magnesium silicide/nickel contacts.

  3. Security assessment of magnesium alloys used as biodegradable implant material.

    PubMed

    Sun, X; Cao, Z Y; Liu, J G; Feng, C

    2015-01-01

    The security risk of magnesium alloys used as biodegradable implant material was evaluated in this study. Dose-response assessment was conducted by using toxicological data from authoritative public health agencies (World Health Organization) and assuming 1~3 years of uniform corrosion. Through modification calculation, the tolerable corrosion rate of biodegradable magnesium alloys in vivo was proposed, which theoretically ensured the bio-safety of the degradation products. The tolerable limits corresponding to various component elements in magnesium alloys were considered separately, although there are deficits in the toxicological data of some component elements. The influence of corrosion on the strength of magnesium alloys was evaluated, which would contribute to the rationally utilization of magnesium alloys as degradable implant materials. This study illustrates that not only toxicological calculations but also mechanical performance should be taken into consideration when developing novel degradable metallic implant.

  4. Thermal Stability of Magnesium Silicide/Nickel Contacts

    NASA Astrophysics Data System (ADS)

    de Boor, J.; Droste, D.; Schneider, C.; Janek, J.; Mueller, E.

    2016-10-01

    Magnesium silicide-based materials are a very promising class of thermoelectric materials with excellent potential for thermoelectric waste heat recovery. For the successful application of magnesium silicide-based thermoelectric generators, the development of long-term stable contacts with low contact resistance is as important as material optimization. We have therefore studied the suitability of Ni as a contact material for magnesium silicide. Co-sintering of magnesium silicide and Ni leads to the formation of a stable reaction layer with low electrical resistance. In this paper we show that the contacts retain their low electrical contact resistance after annealing at temperatures up to 823 K for up to 168 h. By employing scanning electron microscope analysis and time-of-flight (ToF)-secondary ion mass spectrometry, we can further show that elemental diffusion is occurring to a very limited extent. This indicates long-term stability under practical operation conditions for magnesium silicide/nickel contacts.

  5. Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites.

    PubMed

    Liu, Xiaoling; Hasan, Muhammad S; Grant, David M; Harper, Lee T; Parsons, Andrew J; Palmer, Graham; Rudd, Chris D; Ahmed, Ifty

    2014-11-01

    Retention of mechanical properties of phosphate glass fibre reinforced degradable polyesters such as polycaprolactone and polylactic acid in aqueous media has been shown to be strongly influenced by the integrity of the fibre/polymer interface. A previous study utilising 'single fibre' fragmentation tests found that coating with magnesium improved the fibre and matrix interfacial shear strength. Therefore, the aim of this study was to investigate the effects of a magnesium coating on the manufacture and characterisation of a random chopped fibre reinforced polycaprolactone composite. Short chopped strand non-woven phosphate glass fibre mats were sputter coated with degradable magnesium to manufacture phosphate glass fibre/polycaprolactone composites. The degradation behaviour (water uptake, mass loss and pH change of the media) of these polycaprolactone composites as well as of pure polycaprolactone was investigated in phosphate buffered saline. The Mg coated fibre reinforced composites revealed less water uptake and mass loss during degradation compared to the non-coated composites. The cations released were also explored and a lower ion release profile for all three cations investigated (namely Na(+), Mg(2+) and Ca(2+)) was seen for the Mg coated composite samples. An increase of 17% in tensile strength and 47% in tensile modulus was obtained for the Mg coated composite samples. Both flexural and tensile properties were investigated and a higher retention of mechanical properties was obtained for the Mg coated fibre reinforced composite samples up to 10 days immersion in PBS. Cytocompatibility study showed both composite samples (coated and non-coated) had good cytocompatibility with human osteosarcoma cell line.

  6. Formation of Magnesium Silicates is Limited around Evolved Stars

    NASA Astrophysics Data System (ADS)

    Kimura, Yuki; Nuth, J. A., III

    2009-05-01

    Laboratory experiments suggest that magnesium silicide (Mg2Si) grains could be produced in the hydrogen dominant gas outflow from evolved stars in addition to amorphous oxide minerals. Astronomical observations have shown the existence of abundant silicate grains around evolved stars and we have long realized that most of the silicate grains are amorphous, based on the observed infrared features. Only high mass loss stars show the feature attributed to magnesium-rich crystalline silicate about 10-20 % respect to total silicates, so far. The lower degree of crystallinity observed in silicates formed in outflows of lower mass-loss-rate stars might be caused by the formation of magnesium silicide in this relatively hydrogen-rich environment. As a result of predominant distribution of magnesium into the silicide, the composition of interstellar amorphous silicates could be magnesium poor compared with silicon. Indeed, the chemical composition of isotopically anomalous GEMS (glass with embedded metal and sulfides) is magnesium poor with respect to a forsteritic composition (Floss et al. 2006; Keller & Messenger 2007). Infrared observations suggest that there is little or no crystalline forsterite in interstellar environments while there is an abundance of crystalline forsterite in our Solar System. If the forsterite is a result of the oxidation of interstellar magnesium silicide, then it is clear both why crystalline forsterite is stoichiometric olivine and why the chemical composition of isotopically anomalous GEMS is magnesium poor with respect to a forsteritic composition. In addition, it may also explain why the chemical composition of olivine is iron poor. Unfortunately, magnesium silicide has never been detected via astronomical observation or in the analysis of primitive meteorites. I would suggest that future analysis of meteorites and theoretical calculations could confirm the possibility of the formation of magnesium silicide grains around evolved stars.

  7. Thermochemistry of dense hydrous magnesium silicates

    NASA Technical Reports Server (NTRS)

    Bose, Kunal; Burnley, Pamela; Navrotsky, Alexandra

    1994-01-01

    Recent experimental investigations under mantle conditions have identified a suite of dense hydrous magnesium silicate (DHMS) phases that could be conduits to transport water to at least the 660 km discontinuity via mature, relatively cold, subducting slabs. Water released from successive dehydration of these phases during subduction could be responsible for deep focus earthquakes, mantle metasomatism and a host of other physico-chemical processes central to our understanding of the earth's deep interior. In order to construct a thermodynamic data base that can delineate and predict the stability ranges for DHMS phases, reliable thermochemical and thermophysical data are required. One of the major obstacles in calorimetric studies of phases synthesized under high pressure conditions has been limitation due to the small (less than 5 mg) sample mass. Our refinement of calorimeter techniques now allow precise determination of enthalpies of solution of less than 5 mg samples of hydrous magnesium silicates. For example, high temperature solution calorimetry of natural talc (Mg(0.99) Fe(0.01)Si4O10(OH)2), periclase (MgO) and quartz (SiO2) yield enthalpies of drop solution at 1044 K to be 592.2 (2.2), 52.01 (0.12) and 45.76 (0.4) kJ/mol respectively. The corresponding enthalpy of formation from oxides at 298 K for talc is minus 5908.2 kJ/mol agreeing within 0.1 percent to literature values.

  8. Thermochemistry of dense hydrous magnesium silicates

    NASA Astrophysics Data System (ADS)

    Bose, Kunal; Burnley, Pamela; Navrotsky, Alexandra

    Recent experimental investigations under mantle conditions have identified a suite of dense hydrous magnesium silicate (DHMS) phases that could be conduits to transport water to at least the 660 km discontinuity via mature, relatively cold, subducting slabs. Water released from successive dehydration of these phases during subduction could be responsible for deep focus earthquakes, mantle metasomatism and a host of other physico-chemical processes central to our understanding of the earth's deep interior. In order to construct a thermodynamic data base that can delineate and predict the stability ranges for DHMS phases, reliable thermochemical and thermophysical data are required. One of the major obstacles in calorimetric studies of phases synthesized under high pressure conditions has been limitation due to the small (less than 5 mg) sample mass. Our refinement of calorimeter techniques now allow precise determination of enthalpies of solution of less than 5 mg samples of hydrous magnesium silicates. For example, high temperature solution calorimetry of natural talc (Mg(0.99) Fe(0.01)Si4O10(OH)2), periclase (MgO) and quartz (SiO2) yield enthalpies of drop solution at 1044 K to be 592.2 (2.2), 52.01 (0.12) and 45.76 (0.4) kJ/mol respectively. The corresponding enthalpy of formation from oxides at 298 K for talc is minus 5908.2 kJ/mol agreeing within 0.1 percent to literature values.

  9. A Magnesium-Activated Carbon Hybrid Capacitor

    SciTech Connect

    Yoo, HD; Shterenberg, I; Gofer, Y; Doe, RE; Fischer, CC; Ceder, G; Aurbach, D

    2013-12-11

    Prototype cells of hybrid capacitor were developed, comprising activated carbon (AC) cloth and magnesium (Mg) foil as the positive and negative electrodes, respectively. The electrolyte solution included ether solvent (TBF) and a magnesium organo-halo-aluminate complex 0.25 M Mg2Cl3+-Ph2AlCl2-. In this solution Mg can be deposited/dissolved reversibly for thousands of cycles with high reversibility (100% cycling efficiency). The main barrier for integrating porous AC electrodes with this electrolyte solution was the saturation of the pores with the large ions in the AC prior to reaching the potential limit. This is due to the existence of bulky Mg and Al based ionic complexes consisting Cl, alkyl or aryl (R), and THF ligands. This problem was resolved by adding 0.5 M of lithium chloride (LiCl), thus introducing smaller ionic species to the solution. This Mg hybrid capacitor system demonstrated a stable cycle performance for many thousands of cycles with a specific capacitance of 90 Fg(-1) for the AC positive electrodes along a potential range of 2.4 V. (C) 2014 The Electrochemical Society. All rights reserved.

  10. Blackening of magnesium alloy using femtosecond laser.

    PubMed

    Shi, Haixia; Cui, Zeqin; Wang, Wenxian; Xu, Bingshe; Gong, Dianqing; Zhang, Wei

    2015-09-01

    Magnesium alloy, a potential structural and biodegradable material, has been increasingly attracting attention. In this paper, two structures with enhanced light absorption on an AZ31B magnesium surface are fabricated by femtosecond laser texturing. Laser power and the number of laser pulses are mainly investigated for darkening effect. After irradiation, surface characteristics are analyzed by a scanning electron microscope equipped with an energy dispersive spectrometer and laser scanning confocal microscope. The darkening effect is investigated by a spectrophotometer with an integrating sphere. Microgroove and stripe structures are obtained, which are covered with homogeneous nanoprotrusions and nanoparticles. The main surface chemical composition after laser ablation is MgO. The optimal light absorption in the visible range (wavelength of 400-800 nm) reaches about 98%, which is significantly improved compared with the untreated surface. The enhanced light absorption is mainly attributed to surface structure. Femtosecond laser surface texturing technology offers potential in the application of stealth technology, airborne devices, and biomedicine.

  11. Synthesis of nanoscale magnesium diboride powder

    DOE PAGES

    Finnemore, D. K.; Marzik, J. V.

    2015-12-18

    A procedure has been developed for the preparation of small grained magnesium diboride (MgB2) powder by reacting nanometer size boron powder in a magnesium vapor. Plasma synthesized boron powder that had particle sizes ranging from 20 to 300nm was mixed with millimeter size chunks of Mg by rolling stoichiometric amounts of the powders in a sealed cylindrical container under nitrogen gas. This mixture then was placed in a niobium reaction vessel, evacuated, and sealed by e-beam welding. The vessel was typically heated to approximately 830°C for several hours. The resulting MgB2 particles have a grain size in the 200 nmmore » to 800 nm range. Agglomerates of loosely bound particles could be broken up by light grinding in a mortar and pestle. At 830°C, many particles are composed of several grains grown together so that the average particle size is about twice the average grain size. Furthermore, experiments were conducted primarily with undoped boron powder, but carbon-doped boron powder showed very similar results.« less

  12. Synthesis of nanoscale magnesium diboride powder

    SciTech Connect

    Finnemore, D. K.; Marzik, J. V.

    2015-12-18

    A procedure has been developed for the preparation of small grained magnesium diboride (MgB2) powder by reacting nanometer size boron powder in a magnesium vapor. Plasma synthesized boron powder that had particle sizes ranging from 20 to 300nm was mixed with millimeter size chunks of Mg by rolling stoichiometric amounts of the powders in a sealed cylindrical container under nitrogen gas. This mixture then was placed in a niobium reaction vessel, evacuated, and sealed by e-beam welding. The vessel was typically heated to approximately 830°C for several hours. The resulting MgB2 particles have a grain size in the 200 nm to 800 nm range. Agglomerates of loosely bound particles could be broken up by light grinding in a mortar and pestle. At 830°C, many particles are composed of several grains grown together so that the average particle size is about twice the average grain size. Furthermore, experiments were conducted primarily with undoped boron powder, but carbon-doped boron powder showed very similar results.

  13. Deuterium storage in nanocrystalline magnesium thin films

    NASA Astrophysics Data System (ADS)

    Checchetto, R.; Bazzanella, N.; Miotello, A.; Brusa, R. S.; Zecca, A.; Mengucci, A.

    2004-02-01

    Nanocrystalline magnesium deuteride thin films with the β-MgD2 structure were prepared by vacuum evaporation of hexagonal magnesium (h-Mg) samples and thermal annealing in 0.15 MPa D2 atmosphere at 373 K. Thermal desorption spectroscopy analysis indicated that the rate-limiting step in the deuterium desorption was given by the thermal decomposition of the deuteride phase. The activation energy Δg of the β-MgD2→h-Mg+D2 reaction scaled from 1.13±0.03 eV in 650-nm-thick films to 1.01±0.02 eV in 75-nm-thick films most likely as consequence of different stress and defect level. Positron annihilation spectroscopy analysis of the thin-film samples submitted to deuterium absorption and desorption cycles reveal the presence of a high concentration of void-like defects in the h-Mg layers after the very first decomposition of the β-MgD2 phase, the presence of these open volume defects reduces the D2 absorption capacity of the h-Mg thin film.

  14. Fabrication of multilayer pancakelike basic magnesium carbonate.

    PubMed

    Sun, Jinhe; Jia, Yongzhong; Yan Jing; Yao, Ying; Ma, Jun

    2014-10-01

    The properties of nanomaterials was strongly affected by their microstructures. Here Mg5(CO3)4(OH)2 x 4H2O multilayer pancakelike structures were fabricated successfully by reaction of MgCl2 and Na2CO3 in aqueous solution at 363 K. The growth process of nanostructures was observed by XRD and SEM. Several transition states of multilayer pancakelike basic magnesium carbonates were observed, which help to understand better the formation process of this hierarchical nanostructures. The formation mechanism of Mg5(CO3)4(OH)2 x 4H2O multilayer pancakelike structures was discussed and helical growth was proposed. The amorphous nanoparticles were formed firstly. Then nanopartilces aggregated and oriented assembly under the direction of chemical bonds with the help of water molecules. The multilayer pancakelike basic magnesium carbonates was formed by helical growth of wafers along (100) and (001) direction. The diameter and volume decreased with the increasing concentration of reactants. PMID:25942931

  15. Blackening of magnesium alloy using femtosecond laser.

    PubMed

    Shi, Haixia; Cui, Zeqin; Wang, Wenxian; Xu, Bingshe; Gong, Dianqing; Zhang, Wei

    2015-09-01

    Magnesium alloy, a potential structural and biodegradable material, has been increasingly attracting attention. In this paper, two structures with enhanced light absorption on an AZ31B magnesium surface are fabricated by femtosecond laser texturing. Laser power and the number of laser pulses are mainly investigated for darkening effect. After irradiation, surface characteristics are analyzed by a scanning electron microscope equipped with an energy dispersive spectrometer and laser scanning confocal microscope. The darkening effect is investigated by a spectrophotometer with an integrating sphere. Microgroove and stripe structures are obtained, which are covered with homogeneous nanoprotrusions and nanoparticles. The main surface chemical composition after laser ablation is MgO. The optimal light absorption in the visible range (wavelength of 400-800 nm) reaches about 98%, which is significantly improved compared with the untreated surface. The enhanced light absorption is mainly attributed to surface structure. Femtosecond laser surface texturing technology offers potential in the application of stealth technology, airborne devices, and biomedicine. PMID:26368903

  16. Synthesis and spectral characterization of silver/magnesium co-substituted hydroxyapatite for biomedical applications

    NASA Astrophysics Data System (ADS)

    Gopi, D.; Shinyjoy, E.; Kavitha, L.

    2014-06-01

    The present work is aimed at the synthesis of antibacterial and bioactive silver/magnesium co-substituted hydroxyapatite (Ag/Mg-HAP) powders. For this purpose, firstly, different concentrations (0.5, 1.5, 2.5 wt.%) of silver substituted HAP (Ag-HAP) powders were prepared by ultrasonic irradiation technique and were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). Secondly, magnesium (Mg) is co-substituted as secondary material into Ag-HAP to offset the potential cytotoxicity of Ag, as higher concentration of Ag is toxic. The antibacterial activity of as-synthesized powders was evaluated by Escherichia coli (E. coli) and was found to be effectively high against bacterial colonization. Also, the in vitro cell-material interaction is evaluated with human osteosarcoma MG63 (HOS MG63) cells for cell proliferation. The results showed the evidence of cytotoxic effects of the higher concentration of Ag-HAP characterized by poor cellular viability whereas, Ag/Mg-HAP showed better cell viability indicating that co-substitution of Mg in Ag-HAP effectively offset the negative effects of Ag and improve performance compared with pure HAP. Thus, the as synthesized Ag/Mg-HAP will serve as a better candidate for biomedical applications with good antibacterial property and bone bonding ability.

  17. Dynamical behaviors of structural, constrained and free water in calcium- and magnesium-silicate-hydrate gels

    DOE PAGES

    Le, Peisi; Fratini, Emiliano; Ito, Kanae; Wang, Zhe; Mamontov, Eugene; Baglioni, Piero; Chen, Sow-Hsin

    2016-01-28

    We present the hypothesis that the mechanical properties of cement pastes depend strongly on their porosities. In a saturated paste, the porosity links to the free water volume after hydration. Structural water, constrained water, and free water have different dynamical behavior. Hence, it should be possible to extract information on pore system by exploiting the water dynamics. With our experiments we investigated the slow dynamics of hydration water confined in calcium- and magnesium-silicate-hydrate (C-S-H and M-S-H) gels using high-resolution quasi-elastic neutron scattering (QENS) technique. C-S-H and M-S-H are the chemical binders present in calcium rich and magnesium rich cements. Wemore » measured three M-S-H samples: pure M-S-H, M-S-H with aluminum-silicate nanotubes (ASN), and M-S-H with carboxyl group functionalized ASN (ASN-COOH). A C-S-H sample with the same water content (i.e. 0.3) is also studied for comparison. We found that structural water in the gels contributes to the elastic component of the QENS spectrum, while constrained water and free water contribute the quasi-elastic component. The quantitative analysis suggests that the three components vary for different samples and indicate the variance in the system porosity, which controls the mechanical properties of cement pastes.« less

  18. Early irradiation of matter in the solar system: magnesium (proton, neutron) scheme.

    PubMed

    Heymann, D; Dziczkaniec, M

    1976-01-01

    The occurrence of positive and negative (26)Mg anomalies in inclusions of the Allende meteorite is explained in terms of proton bombardment of a gas of solar composition. A significant fraction of (26)Mg in the irradiated gas is stored temporarily in the form of radioactive (26)Al by the reaction (26)Mg(p,n) (26)Al. Proton fluxes of 10(17) to 10(19) protons per square centimeter per year at l million electron volts are inferred. Aluminum-rich materials condensing from the gas phase have positive (26)Mg anomalies, whereas magnesium-rich materials have negative (26)Mg anomalies. The proton flux required to account for the observed magnesium anomalies is used to investigate possible isotopic anomalies in the elements from oxygen to argon. Detectable isotopic anomalies are predicted only for neon. The anomalous neon is virtually pure (22)Ne from (22)Na decay. The predicted amount of anomalous (22)Ne is about 10(-8) cubic centimeter (at standard temperature and pressure) per milligram of sodium.

  19. Early irradiation of matter in the solar system - Magnesium /proton, neutron/ scheme

    NASA Technical Reports Server (NTRS)

    Heymann, D.; Dziczkaniec, M.

    1976-01-01

    The occurrence of positive and negative Mg-26 anomalies in inclusions of the Allende meteorite is explained in terms of proton bombardment of a gas of solar composition. A significant fraction of Mg-26 in the irradiated gas is stored temporarily in the form of radioactive Al-26 by the reaction Mg-26(p, n)Al-26. Proton fluxes of 10 to the 17th power to 10 to the 19th power protons per square centimeter per year at 1 million electron volts are inferred. Aluminum-rich materials condensing from the gas phase have positive Mg-26 anomalies, whereas magnesium-rich materials have negative Mg-26 anomalies. The proton flux required to account for the observed magnesium anomalies is used to investigate possible isotopic anomalies in the elements from oxygen to argon. Detectable isotopic anomalies are predicted only for neon. The anomalous neon is virtually pure Ne-22 from Na-22 decay. The predicted amount of anomalous Ne-22 is about 10 to the -8th power cubic centimeter (at standard temperature and pressure) per milligram of sodium.

  20. Topography, wetting, and corrosion responses of electrodeposited hydroxyapatite and fluoridated hydroxyapatite on magnesium.

    PubMed

    Assadian, Mahtab; Jafari, Hassan; Ghaffari Shahri, Seyed Morteza; Idris, Mohd Hasbullah; Almasi, Davood

    2016-08-12

    In this study, different types of calcium-phosphate phases were coated on NaOH pre-treated pure magnesium. The coating was applied by electrodeposition method in order to provide higher corrosion resistance and improve biocompatibility for magnesium. Thickness, surface morphology and topography of the coatings were analyzed using optical, scanning electron and atomic-force microscopies, respectively. Composition and chemical bonding, crystalline structures and wettability of the coatings were characterized using energy-dispersive and attenuated total reflectance-Fourier transform infrared spectroscopies, grazing incidence X-ray diffraction and contact angle measurement, respectively. Degradation behavior of the coated specimens was also investigated by potentiodynamic polarization and immersion tests. The experiments proved the presence of a porous coating dominated by dicalcium-phosphate dehydrate on the specimens. It was also verified that the developed hydroxyapatite was crystallized by alkali post-treatment. Addition of supplemental fluoride to the coating electrolyte resulted in stable and highly crystallized structures of fluoridated hydroxyapatite. The coatings were found effective to improve biocompatibility combined with corrosion resistance of the specimens. Noticeably, the fluoride supplemented layer was efficient in lowering corrosion rate and increasing surface roughness of the specimens compared to hydroxyapatite and dicalcium-phosphate dehydrates layers. PMID:27567782

  1. Color-neutral switchable mirrors based on magnesium-titanium thin films

    NASA Astrophysics Data System (ADS)

    Bao, S.; Tajima, K.; Yamada, Y.; Okada, M.; Yoshimura, K.

    2007-06-01

    In an investigation of smart-window applications of switchable mirror thin films, Pd-capped magnesium-titanium thin films were prepared by dc magnetron sputtering. Their optical properties, switching durability and crystalline structures have been investigated. We show that Pd/Mg-Ti thin films with specific thicknesses are completely color-neutral in the transparent state and their optical switching properties are suitable for building and automobile window glass applications. The ternary hydrides of Mg(1-x)Tix thin films with Pd overlayers are identified by in situ X-ray diffraction measurements during a hydrogen gas loading of 4%. Pd/Mg(1-x)Tix thin film switchable mirrors show fast hydriding and dehydriding kinetics as compared to a Pd-capped pure Mg thin film due to the catalytic role of doped metallic Ti.

  2. Heat engine driven by purely quantum information.

    PubMed

    Park, Jung Jun; Kim, Kang-Hwan; Sagawa, Takahiro; Kim, Sang Wook

    2013-12-01

    The key question of this Letter is whether work can be extracted from a heat engine by using purely quantum mechanical information. If the answer is yes, what is its mathematical formula? First, by using a bipartite memory we show that the work extractable from a heat engine is bounded not only by the free energy change and the sum of the entropy change of an individual memory but also by the change of quantum mutual information contained inside the memory. We then find that the engine can be driven by purely quantum information, expressed as the so-called quantum discord, forming a part of the quantum mutual information. To confirm it, as a physical example we present the Szilard engine containing a diatomic molecule with a semipermeable wall.

  3. Pure field theories and MACSYMA algorithms

    NASA Technical Reports Server (NTRS)

    Ament, W. S.

    1977-01-01

    A pure field theory attempts to describe physical phenomena through singularity-free solutions of field equations resulting from an action principle. The physics goes into forming the action principle and interpreting specific results. Algorithms for the intervening mathematical steps are sketched. Vacuum general relativity is a pure field theory, serving as model and providing checks for generalizations. The fields of general relativity are the 10 components of a symmetric Riemannian metric tensor; those of the Einstein-Straus generalization are the 16 components of a nonsymmetric. Algebraic properties are exploited in top level MACSYMA commands toward performing some of the algorithms of that generalization. The light cone for the theory as left by Einstein and Straus is found and simplifications of that theory are discussed.

  4. Symmetries of Type N Pure Radiation Fields

    NASA Astrophysics Data System (ADS)

    Ahsan, Zafar; Ali, Musavvir

    2015-05-01

    The geometrical symmetries corresponding to the continuous groups of collineations and motions generated by a null vector l are considered. These symmetries have been translated into the language of Newman-Penrose formalism for pure radiation (PR) type N fields. It is seen that for such fields, conformal, special conformal and homothetic motions degenerate to motion. The concept of free curvature, matter curvature and matter affine collineations have been discussed and the conditions under which PR type N fields admit such collineations have been obtained. Moreover, it is shown that the projective collineation degenerate to matter affine, special projective, conformal, special conformal, null geodesic and special null geodesic collineations. It is also seen that type N pure radiation fields admit Maxwell collineation along the propagation vector l.

  5. Grip for fatigue testing pure aluminium

    NASA Astrophysics Data System (ADS)

    Lehmann, P.; Yuan, G. S.; Hartwig, K. T.

    A simple method of clamping pure aluminium for fatigue tests at cryogenic temperatures is described. Easily machined cylindrical specimens are aligned and held firmly by collet grips that counteract sample shrinkage during cooldown. Specimens are quickly mounted and removed after testing without distortion or thermal treatment 99.999% aluminium, aluminium alloys and copper were gripped successfully through tens of thousands of fully reversed tension-compression cycles at 295, 77 and 4.2 K.

  6. Pure connection action principle for general relativity.

    PubMed

    Krasnov, Kirill

    2011-06-24

    It has already been known for two decades that general relativity can be reformulated as a certain gauge theory, so that the only dynamical field is an SO(3) connection and the spacetime metric appears as a derived object. However, no simple action principle realizing these ideas has been available. A new elegant action principle for such a "pure connection" formulation of GR is described.

  7. Stable freestanding thin films of pure water

    SciTech Connect

    Weon, B. M.; Je, J. H.; Hwu, Y.; Margaritondo, G.

    2008-03-10

    Obtaining water microstructures is very difficult because of low viscosity and high surface tension. We produced stable freestanding thin films of pure water by x-ray bombardment of small liquid volumes in capillary tubes. A detailed characterization with phase-contrast radiology demonstrated a lifetime beyond 1 h with no chemical stabilizer for micron-thickness films with half-millimeter-level diameter. This can be attributed to the interplay of two x-ray effects: water evaporation and surface charging.

  8. On constructing purely affine theories with matter

    NASA Astrophysics Data System (ADS)

    Cervantes-Cota, Jorge L.; Liebscher, D.-E.

    2016-08-01

    We explore ways to obtain the very existence of a space-time metric from an action principle that does not refer to it a priori. Although there are reasons to believe that only a non-local theory can viably achieve this goal, we investigate here local theories that start with Schrödinger's purely affine theory (Schrödinger in Space-time structure. Cambridge UP, Cambridge, 1950), where he gave reasons to set the metric proportional to the Ricci curvature aposteriori. When we leave the context of unified field theory, and we couple the non-gravitational matter using some weak equivalence principle, we can show that the propagation of shock waves does not define a lightcone when the purely affine theory is local and avoids the explicit use of the Ricci tensor in realizing the weak equivalence principle. When the Ricci tensor is substituted for the metric, the equations seem to have only a very limited set of solutions. This backs the conviction that viable purely affine theories have to be non-local.

  9. Graphical calculus for Gaussian pure states

    SciTech Connect

    Menicucci, Nicolas C.; Flammia, Steven T.; Loock, Peter van

    2011-04-15

    We provide a unified graphical calculus for all Gaussian pure states, including graph transformation rules for all local and semilocal Gaussian unitary operations, as well as local quadrature measurements. We then use this graphical calculus to analyze continuous-variable (CV) cluster states, the essential resource for one-way quantum computing with CV systems. Current graphical approaches to CV cluster states are only valid in the unphysical limit of infinite squeezing, and the associated graph transformation rules only apply when the initial and final states are of this form. Our formalism applies to all Gaussian pure states and subsumes these rules in a natural way. In addition, the term 'CV graph state' currently has several inequivalent definitions in use. Using this formalism we provide a single unifying definition that encompasses all of them. We provide many examples of how the formalism may be used in the context of CV cluster states: defining the 'closest' CV cluster state to a given Gaussian pure state and quantifying the error in the approximation due to finite squeezing; analyzing the optimality of certain methods of generating CV cluster states; drawing connections between this graphical formalism and bosonic Hamiltonians with Gaussian ground states, including those useful for CV one-way quantum computing; and deriving a graphical measure of bipartite entanglement for certain classes of CV cluster states. We mention other possible applications of this formalism and conclude with a brief note on fault tolerance in CV one-way quantum computing.

  10. [SIGNIFICANCE OF MAGNESIUM IN PHISIOLOGY AND PATHOLOGY OF THE DIGESTIVE SYSTEM].

    PubMed

    Grigus, Ya I; Mikhaylova, O D; Gorbunov A Yu; Vakhrushev, Ya M

    2015-01-01

    The article describes the physiological role of magnesium in the human body and its importance for metabolic processes. The reasons for the development of magnesium deficiency and hypermagnesaemia and its clinical symptoms are shown. The specialties of magnesium metabolism disturbances in gastroenterological pathology are described. Particular attention paid to the correction of magnesium levels with deviations of its content in the organism.

  11. Synthesis, Crystal Structure, and Electrochemical Properties of a Simple Magnesium Electrolyte for Magnesium/Sulfur Batteries.

    PubMed

    Li, Wanfei; Cheng, Shuang; Wang, Jian; Qiu, Yongcai; Zheng, Zhaozhao; Lin, Hongzhen; Nanda, Sanjay; Ma, Qian; Xu, Yan; Ye, Fangmin; Liu, Meinan; Zhou, Lisha; Zhang, Yuegang

    2016-05-23

    Most simple magnesium salts tend to passivate the Mg metal surface too quickly to function as electrolytes for Mg batteries. In the present work, an electroactive salt [Mg(THF)6 ][AlCl4 ]2 was synthesized and structurally characterized. The Mg electrolyte based on this simple mononuclear salt showed a high Mg cycling efficiency, good anodic stability (2.5 V vs. Mg), and high ionic conductivity (8.5 mS cm(-1) ). Magnesium/sulfur cells employing the as-prepared electrolyte exhibited good cycling performance over 20 cycles in the range of 0.3-2.6 V, thus indicating an electrochemically reversible conversion of S to MgS without severe passivation of the Mg metal electrode surface. PMID:27094220

  12. Reprint of: The history of biodegradable magnesium implants: A review.

    PubMed

    Witte, Frank

    2015-09-01

    Today, more than 200 years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals.

  13. The history of biodegradable magnesium implants: a review.

    PubMed

    Witte, Frank

    2010-05-01

    Today, more than 200years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals.

  14. The history of biodegradable magnesium implants: a review.

    PubMed

    Witte, Frank

    2010-05-01

    Today, more than 200years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals. PMID:20172057

  15. Reprint of: The history of biodegradable magnesium implants: A review.

    PubMed

    Witte, Frank

    2015-09-01

    Today, more than 200 years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals. PMID:26235343

  16. Prevalence of Thrombocytopenia and Its Association with Serum Magnesium.

    PubMed

    Lu, Leihong; Zhan, Yiqiang; Yu, Jinming; Sui, Lihong

    2016-01-01

    The present study aimed to investigate the prevalence of thrombocytopenia and its association with serum magnesium in a nationally representative cohort. A total of 8478 participants aged 18 years and over were recruited in a cross-sectional survey. Thrombocytopenia was defined as platelet count less than 150 × 10(9)/L. Multivariable logistic regression models were applied to examine the association between serum magnesium and thrombocytopenia. The prevalence of thrombocytopenia in total was 16.5% with 18.8% for men and 14.4% for women (P < 0.0001), respectively. Compared with men in the first quartile of serum magnesium, the odds ratios (ORs) and 95% confidence intervals (CIs) for those in the second, third, and fourth quartiles of serum magnesium were 0.96 (0.75, 1.21), 0.78 (0.62, 0.98), and 0.82 (0.65, 1.04), respectively, after adjusting for multiple confounders. Likewise, the corresponding ORs (95% CIs) were 0.80 (0.63, 1.01), 0.79 (0.62, 0.99), and 0.65 (0.51, 0.84) in women. When serum magnesium was treated as a continuous variable, each one standard deviation increase of magnesium was associated with 12 and 8% lower risk of thrombocytopenia in men and women, respectively. Serum magnesium was inversely associated with thrombocytopenia, and the association was slightly different in men compared with that in women.

  17. Effects of thyroid status on renal calcium and magnesium handling.

    PubMed Central

    McCaffrey, C; Quamme, G A

    1984-01-01

    Renal calcium and magnesium handling was studied in rats with chronic thyroid hormone deficiency or excess, hyperthyroidism. Mean kidney weight of the thyroid deficient rats was 42% of age matched, euthyroid and hyperthyroid animals and glomerular filtration rate was 71% of normal. Fractional sodium excretion was consistently elevated in thyroid deficient rats (0.26%) as compared to euthyroid (0.07%) and hyperthyroid animals (0.07%). Urinary calcium excretion (0.39%) was also elevated and parallel to sodium excretion in thyroid deficiency. Despite this renal leak of sodium and calcium, thyroid deficient animals conserved magnesium much more efficiently than either euthyroid or hyperthyroid rats (5.7% vs 17.4% respectively). Plasma magnesium concentration was elevated by acute MgCl2 infusions to determine the reabsorptive capacity of magnesium. Thyroid deficient rats reabsorbed 15-30% more of the filtered magnesium at any given plasma concentration. Although these effects on electrolyte reabsorption are modest compared to the hemodynamic alterations, the data suggest that thyroid hormone has a direct effect on the tubule which if chronically absent results in subtle sodium and calcium wasting and renal retention of magnesium. Administration of thyroid hormone to euthyroid or thyroid deficient rats twenty-four hours prior to experimentation had no effect on calcium and magnesium handling. PMID:6713257

  18. Effect of magnesium on the burning characteristics of boron particles

    NASA Astrophysics Data System (ADS)

    Liu, Jian-zhong; Xi, Jian-fei; Yang, Wei-juan; Hu, You-rui; Zhang, Yan-wei; Wang, Yang; Zhou, Jun-hu

    2014-03-01

    Boron is an attractive fuel for propellants and explosives because of its high energy density. However, boron particles are difficult to combust because of inhibiting oxide layers that cover the particles. The use of magnesium as additives has been shown to promote boron oxidation. In this study, laser ignition facility and thermobalance were used to investigate the effect of magnesium on the burning characteristics of boron particles. The influences of magnesium addition on sample combustion flame, boron ignition delay time, boron combustion efficiency and initial temperature of boron oxidation. Results show that all Mg/B samples exhibit the same type of flame structure, i.e., a bright plume surrounded by green radiation which is interpreted as BO2 emission. The combustion flame intensity of a sample increases with the increasing magnesium content of boron particles. An increase in magnesium content results in a decrease and a subsequent increase in boron ignition delay time. (Mg/B)0.2 has a minimum ignition delay time of ~48 ms. Boron combustion efficiency increases with increasing magnesium addition. (Mg/B)0.5 shows a maximum boron combustion efficiency of ~64.2%. Magnesium addition decreases the initial temperature of boron oxidation.

  19. Cardioprotective effects of magnesium valproate in type 2 diabetes mellitus.

    PubMed

    Patel, Bhoomika M; Raghunathan, Suchi; Porwal, Urvashi

    2014-04-01

    We have evaluated the effect of magnesium valproate (210 mg/kg/day, p.o.) in type 2 diabetes induced cardiovascular complications induced by streptozotocin (STZ, 90 mg/kg, i.p.) in neonatal wistar rats. Various biochemical, cardiovascular and hemodynamic parameters were measured at the end of 8 weeks of treatment. STZ produced significant hyperglycaemia, hypoinsulinemia and dyslipidemia, which was prevented by magnesium valproate treatment. STZ produced increase in Creatinine Kinase, C-reactive protein and lactate dehydrogenase levels and treatment with magnesium valproate produced reduction in these levels. STZ produced increase in cardiac and LV hypertrophy index, LV/RV ratio, LV collagen deposition and LV cardiomyocyte diameter which were decreased by magnesium valproate treatment. Magnesium valproate also prevented STZ induced hemodynamic alterations and oxidative stress. These results were further supported by histopathological studies in which magnesium valproate showed marked reduction in fibrosis and cardiac fiber disarray. In conclusion, our data suggests that magnesium valproate is beneficial as an anti-diabetic agent in type-2 diabetes mellitus and also prevents its cardiac complications.

  20. Wear Behavior Characterization for the Screening of Magnesium-based Alloys

    NASA Astrophysics Data System (ADS)

    McGhee, Paul R.

    This research is focused on the development of a systematic approach to evaluate the selection of materials for Mg-based alloys under wear conditions for biomedical applications. A pilot study was carried out in order to establish an accurate and reliable wear testing technique for magnesium and its alloys. This pilot study was conducted on aluminum (Al) and pure Mg, and showed that aluminum has a lower wear rate compared to Mg. The technique displayed good repeatability and high precision. For the main study, an ERC Mg-based alloy was to be compared with pure Mg. The same technique, when applied to pure Mg from a different vendor, produced up to 90% scatter in the data. Microstructure was studied to see if it had any correlation with the scatter. It was discovered that Mg ingot from the second vendor had outsized grains that contributed to the disproportional scatter in the wear data. Increasing the stroke length during wear testing was required so that the wear data would be averaged over multiple grains and reduces the variation in computed wear rates. In the main study, wear behavior and friction properties were analyzed using microtribometery, mechanical stylus profilometry, and microindentation. Surface morphology and microstructure were characterized using optical microscopy, scanning electron microscopy, and optical profilometry. For the main study, pure Mg and the ERC alloy as-cast and extruded conditions were compared. Pure Mg and MZCR alloys were extruded at 350°C and 400°C, respectively. Mg and MZCR alloy were cast at 350°C and heat treated at 510°C. The extruded specimens were divided into two sections, cross-section and longitudinal section. Wear tests were carried out under the applied normal load 0.5 N - 2.5 N in 0.5 N increments sliding at a rate of 0.2 Hz for 240 passes. The results show that the alloying and extrusion processes increase the hardness of the MZCR alloy significantly up to 80%. The as-cast MZCR has a lower resistance to wear

  1. Oral magnesium supplementation in type II diabetic patients

    PubMed Central

    Solati, Mehrdad; Ouspid, Elham; Hosseini, Saeedeh; Soltani, Nepton; Keshavarz, Mansoor; Dehghani, Mohsen

    2014-01-01

    Background: Magnesium is the second most abundant intracellular cation. It plays an important role in insulin homeostasis and glucose metabolism through multiple enzymatic reactions. With increasing data on magnesium deficiency in diabetic patients and epidemiological studies demonstrating magnesium deficiency as a risk factor for diabetes, it is logical to search for its possible beneficial effects on diabetes control and prevention. We aimed to determine whether oral magnesium supplementation improves metabolic control, lipid profile and blood pressure in patients with type II diabetes. Methods: Fifty four patients with type II diabetes were included in a randomized double blind placebocontrolled clinical trial.Patients received either placebo or 300 mg elemental magnesium (as magnesium sulfate -MgSo4-) daily, for 3 months. Metabolic control, lipid profile, blood pressure, magnesium status, hepatic enzymes, hemoglobin concentration, and anthropometric indices were determined in the beginning and at the end of the study. Results: Daily administration of 300 mg elemental magnesium for 3 months, significantly improved fasting blood glucose (183.9±15.43 to 125.8±6.52 vs. 196.5±28.12 to 136.5±7.94, p< 0.0001), 2-hour post prandial glucose (239.1±74.75 to 189.1±60mg/dl vs. 246.4±97.37 to 247.8±86.74mg/dl, p< 0.01), lipid profile, blood pressure and hepatic enzymes. Conclusion: Oral magnesium supplementation with proper dosage has beneficial effects on blood glucose, lipid profile, and blood pressure in patients with type II diabetes. PMID:25405132

  2. Characteristics of tetrahydrofuran-based electrolytes with magnesium alkoxide additives for rechargeable magnesium batteries

    NASA Astrophysics Data System (ADS)

    Kim, In-Tae; Yamabuki, Kazuhiro; Sumimoto, Michinori; Tsutsumi, Hiromori; Morita, Masayuki; Yoshimoto, Nobuko

    2016-08-01

    The electrochemical behavior of magnesium (Mg) metal was investigated in tetrahydrofuran (THF)-based solutions containing magnesium bromide (MgBr2) and/or magnesium ethoxide (Mg(OEt)2). THF solutions containing a single solute, MgBr2 or Mg(OEt)2, show no visible faradaic current based on Mg deposition and/or dissolution. However, the electrolyte system containing both solutes, MgBr2 + Mg(OEt)2/THF, gives a reversible current response of Mg deposition and dissolution. The ionic structure of the electrolyte system containing the binary solute was examined by infrared (IR) spectroscopy and density functional theory (DFT) calculations. It was confirmed that MgBr2 and Mg(OEt)2 are coordinated (solvated) with THF molecules to form an EtOsbnd Mgsbnd Br·4THF complex. The DFT calculations also suggest the possible formation of μ-complexes for the MgBr2/Mg(OEt)2 binary system in THF. The voltammetric responses at the Pt electrode indicate low overpotential and high coulombic efficiency for Mg deposition and dissolution in THF-based solutions containing suitable molar ratios of MgBr2 and Mg(OEt)2. The constant-current charge-discharge cycling of Mg in MgBr2 + Mg(OEt)2/THF electrolyte also shows low overpotential and good cyclability over 300 cycles.

  3. Biodegradable Magnesium Alloys: A Review of Material Development and Applications

    PubMed Central

    Persaud-Sharma, Dharam; McGoron, Anthony

    2012-01-01

    Magnesium based alloys possess a natural ability to biodegrade due to corrosion when placed within aqueous substances, which is promising for cardiovascular and orthopedic medical device applications. These materials can serve as a temporary scaffold when placed in vivo, which is desirable for treatments when temporary supportive structures are required to assist in the wound healing process. The nature of these materials to degrade is attributed to the high oxidative corrosion rates of magnesium. In this review, a summary is presented for magnesium material development, biocorrosion characteristics, as well as a biological translation for these results. PMID:22408600

  4. Process for converting magnesium fluoride to calcium fluoride

    DOEpatents

    Kreuzmann, A.B.; Palmer, D.A.

    1984-12-21

    This invention is a process for the conversion of magnesium fluoride to calcium fluoride whereby magnesium fluoride is decomposed by heating in the presence of calcium carbonate, calcium oxide or calcium hydroxide. Magnesium fluoride is a by-product of the reduction of uranium tetrafluoride to form uranium metal and has no known commercial use, thus its production creates a significant storage problem. The advantage of this invention is that the quality of calcium fluoride produced is sufficient to be used in the industrial manufacture of anhydrous hydrogen fluoride, steel mill flux or ceramic applications.

  5. Corrosion resistant properties of polyaniline acrylic coating on magnesium alloy

    NASA Astrophysics Data System (ADS)

    Sathiyanarayanan, S.; Azim, S. Syed; Venkatachari, G.

    2006-12-01

    The performance of the paint coating based on acrylic-polyaniline on magnesium alloy ZM 21 has been studied by electrochemical impedance spectroscopy in 0.5% NaCl solution. The polyaniline was prepared by chemical oxidative method of aniline with ammonium persulphate in phosphoric acid medium. The phosphate-doped polyaniline was characterized by FTIR and XRD methods. Acrylic paint containing the phosphate-doped polyaniline was prepared and coated on magnesium ZM 21 alloy. The coating was able to protect the magnesium alloy and no base metal dissolution was noted even after 75 days exposure to sodium chloride solution.

  6. A lightweight shape-memory magnesium alloy

    NASA Astrophysics Data System (ADS)

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-01

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)–, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at –150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries.

  7. Nanocomposite polymer electrolyte for rechargeable magnesium batteries

    SciTech Connect

    Shao, Yuyan; Rajput, Nav Nidhi; Hu, Jian Z.; Hu, Mary Y.; Liu, Tianbiao L.; Wei, Zhehao; Gu, Meng; Deng, Xuchu; Xu, Suochang; Han, Kee Sung; Wang, Jiulin; Nie, Zimin; Li, Guosheng; Zavadil, K.; Xiao, Jie; Wang, Chong M.; Henderson, Wesley A.; Zhang, Jiguang; Wang, Yong; Mueller, Karl T.; Persson, Kristin A.; Liu, Jun

    2014-12-28

    Nanocomposite polymer electrolytes present new opportunities for rechargeable magnesium batteries. However, few polymer electrolytes have demonstrated reversible Mg deposition/dissolution and those that have still contain volatile liquids such as tetrahydrofuran (THF). In this work, we report a nanocomposite polymer electrolyte based on poly(ethylene oxide) (PEO), Mg(BH4)2 and MgO nanoparticles for rechargeable Mg batteries. Cells with this electrolyte have a high coulombic efficiency of 98% for Mg plating/stripping and a high cycling stability. Through combined experiment-modeling investigations, a correlation between improved solvation of the salt and solvent chain length, chelation and oxygen denticity is established. Following the same trend, the nanocomposite polymer electrolyte is inferred to enhance the dissociation of the salt Mg(BH4)2 and thus improve the electrochemical performance. The insights and design metrics thus obtained may be used in nanocomposite electrolytes for other multivalent systems.

  8. Laser glazing of lanthanum magnesium hexaaluminate

    NASA Astrophysics Data System (ADS)

    Zhang, Yanfei; Wang, Yaomin; Jarligo, Maria Ophelia; Zhong, Xinghua; Li, Qin; Cao, Xueqiang

    2008-08-01

    Lanthanum magnesium hexaalumminate (LMA) is an important candidate for thermal barrier coatings due to its thermal stability and low thermal conductivity. On the other hand, laser glazing method can potentially make thermal barrier coatings impermeable, resistant to corrosion on the surface and porous at bulk. LMA powder was synthesized at 1600 °C by solid-state reaction, pressed into tablet and laser glazed with a 5-kW continuous wave CO2 laser. Dendritic structures were observed on the surface of the laser-glazed specimen. The thicker the tablet, the easier the sample cracks. Cracking during laser glazing is attributed to the low thermal expansion coefficient and large thickness of the sample.

  9. A lightweight shape-memory magnesium alloy.

    PubMed

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-22

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)-, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at -150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries. PMID:27463668

  10. A lightweight shape-memory magnesium alloy

    NASA Astrophysics Data System (ADS)

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-01

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)-, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at -150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries.

  11. Infrared processing of magnesium wrought alloys

    SciTech Connect

    Horton Jr, Joe A; Blue, Craig A; Muth, T; Bowles, Amanda L; Agnew, Sean R

    2005-01-01

    High density infrared (HDI) processing of magnesium alloy sheet allows rapid heat up and cool down and may facilitate a continuous cast/roll process, thereby reducing costs. In a previous study, a plasma arc lamp resulted in an anneal in seconds that compared well to a normal 1 h 500 C anneal. The current study on AZ31 used a bank of quartz infrared lamps both in a lab setting and in a demonstration test at a commercial facility (Manufacturing Sciences, Inc.). Typical reheats and anneals between rolling passes required 2 to 5 minutes for rolling 6 mm sheet down to 1 mm. Tensile tests showed comparable results to normal processing. The near surface microstructure was similar to the center of the sheets. No gross progressive or cumulative effect on mechanical properties was observed from pass to pass. Good surface quality with minimal edge cracking was produced.

  12. Forge Welding of Magnesium Alloy to Aluminum Alloy Using a Cu, Ni, or Ti Interlayer

    NASA Astrophysics Data System (ADS)

    Yamagishi, Hideki; Sumioka, Junji; Kakiuchi, Shigeki; Tomida, Shogo; Takeda, Kouichi; Shimazaki, Kouichi

    2015-08-01

    The forge-welding process was examined to develop a high-strength bonding application of magnesium (Mg) alloy to aluminum (Al) alloy under high-productivity conditions. The effect of the insert material on the tensile strength of the joints, under various preheat temperatures and pressures, was investigated by analyzing the reaction layers of the bonded interface. The tensile strengths resulting from direct bonding, using pure copper (Cu), pure nickel (Ni), and pure titanium (Ti) inserts were 56, 100, 119, and 151 MPa, respectively. The maximum joint strength reached 93 pct with respect to the Mg cast billet. During high-pressure bonding, a microscopic plastic flow occurred that contributed to an anchor effect and the generation of a newly formed surface at the interface, particularly prominent with the Ti insert in the form of an oxide layer. The bonded interfaces of the maximum-strength inserts were investigated using scanning electron microscopy-energy-dispersive spectroscopy and electron probe microanalysis. The diffusion reaction layer at the bonded interface consisted of brittle Al-Mg intermetallics having a thickness of approximately 30 μm. In contrast, for the three inserts, the thicknesses of the diffusion reaction layer were infinitely thin. For the pure Ti insert, exhibiting the maximum tensile strength value among the inserts tested, focused ion beam-transmission electron microscopy-EDS analysis revealed a 60-nm-thick Al-Ti reaction layer, which had formed at the bonded interface on the Mg alloy side. Thus, a high-strength Al-Mg bonding method in air was demonstrated, suitable for mass production.

  13. Theoretical Study of Infrared and Raman Spectra of Hydrated Magnesium Sulfate Salts

    NASA Technical Reports Server (NTRS)

    Chaban, Galina M.; Huo, Winifred M.; Lee, Timothy J.; Kwak, Dochan (Technical Monitor)

    2002-01-01

    Harmonic and anharmonic vibrational frequencies, as well as infrared and Raman intensities, are calculated for MgSO4.nH20 (n=1-3). Electronic structure theory at the second order Moller-Plesset perturbation theory (MP2) level with a triple-zeta + polarization (TZP) basis set is used to determine the geometry, properties, and vibrational spectra of pure and hydrated MgSO4 salts. The direct vibrational self-consistent field (VSCF) method and its correlation corrected (CC-VSCF) extension are used to determine anharmonic corrections to vibrational frequencies and intensities for the pure MgSO4 and its complex with one water molecule. Very significant differences are found between vibrational of water molecules in complexes with MgSO4 and pure water. Some of the O-H stretching frequencies are shifted to the red very significantly (by up to 1500-2000/cm) upon complexation with magnesium sulfate. They should be observed between 1700 and 3000/cm in a region very different from the corresponding O-H stretch frequency region of pure water (3700-3800/cm). In addition, the SO2 stretching vibrations are found at lower frequency regions than the water vibrations. They can serve as unique identifiers for the presence of sulfate salts. The predicted infrared and Raman spectra should be of valuable help in the design of future missions and analysis of observed data from the ice surface of Jupiter's moon Europa that possibly contains hydrated MgSO4 salts.

  14. The magnesium chelation step in chlorophyll biosynthesis

    SciTech Connect

    Weinstein, J.

    1990-11-01

    In photosynthetic organisms, the biogenesis of energy transducing membranes requires the coordinate synthesis of prosthetic groups, proteins, and various lipids. Two of the major prosthetic groups, chlorophyll and heme, share a common biosynthetic pathway that diverges at the point of metal insertion into protoporphyrin IX (Proto). Insertion of iron leads to the formation of hemes, while insertion of magnesium is the first step unique to chlorophyll formation. This project is directed toward identifying the enzyme(s) responsible for magnesium chelation and elucidating the mechanism which regulates the flux of precursors through the branch point enzymes in isolated chloroplasts. Using intact chloroplasts from greening cucumber cotyledons, we have confirmed the ATP requirement for Mg-Proto formation. Use of non-hydrolyzable ATP analogs, uncouplers and ionophores has led to the conclusions that ATP hydrolysis is necessary, but that this hydrolysis is not linked to the requirement for membrane intactness by transmembrane ion gradients or electrical potentials. The enzyme(s) are flexible with respect to the porphyrin substrate specificity, accepting porphyrins with -vinyl, -ethyl, or -H substituents at the 2 and 4 positions. The activity increases approximately four-fold during greening. Possible physiological feedback inhibitors such as heme, protochlorophyllide, and chlorophyllide had no specific effect on the activity. The activity has now been assayed in barely, corn and peas, with the system from peas almost ten-fold more active than the cucumber system. Work is continuing in pea chloroplasts with the development of a continuous assay and investigation of the feasibility of characterizing an active, organelle-free preparation. 6 figs.

  15. The influence of magnesium chloride on blood and urine parameters in calcium oxalate stone patients.

    PubMed

    Brundig, P; Berg, W; Schneider, H J

    1981-01-01

    The influence of magnesium chloride on various blood and urine parameters in calcium oxalate stone patients is studied. High dose magnesium therapy was found to increase urinary magnesium concentrations, whereas the oxalic acid concentration is reduced. The experiments support the statements on the role of magnesium in endogenous oxalic acid depression and the inhibition of the intestinal resorption. For urolith prevention it will be necessary to apply high magnesium doses of easily absorbable and well-tolerated medicaments.

  16. Augmenting The HST Pure Parallel Observations

    NASA Astrophysics Data System (ADS)

    Patterson, Alan; Soutchkova, G.; Workman, W.

    2012-05-01

    Pure Parallel (PP) programs, designated GO/PAR, are a subgroup of General Observer (GO) programs. PP execute simultaneously with prime GO observations to which they are "attached". The PP observations can be performed with ACS/WFC, WFC3/UVIS or WFC3/IR and can be attached only to GO visits in which the instruments are either COS or STIS. The current HST Parallel Observation Processing System (POPS) was introduced after the Servicing Mission 4. It increased the HST productivity by 10% in terms of the utilization of HST prime orbits and was highly appreciated by the HST observers, allowing them to design efficient, multi-orbit survey projects for collecting large amounts of data on identifiable targets. The results of the WFC3 Infrared Spectroscopic Parallel Survey (WISP), Hubble Infrared Pure Parallel Imaging Extragalactic Survey (HIPPIES), and The Brightest-of-Reionizing Galaxies Pure Parallel Survey (BoRG) exemplify this benefit. In Cycle 19, however, the full advantage of GO/PARs came under risk. Whereas each of the previous cycles provided over one million seconds of exposure time for PP, in Cycle 19 that number reduced to 680,000 seconds. This dramatic decline occurred because of fundamental changes in the construction of COS prime observations. To preserve the science output of PP, the PP Working Group was tasked to find a way to recover the lost time and maximize the total time available for PP observing. The solution was to expand the definition of a PP opportunity to allow PP exposures to span one or more primary exposure readouts. So starting in HST Cycle 20, PP opportunities will no longer be limited to GO visits with a single uninterrupted exposure in an orbit. The resulting enhancements in HST Cycle 20 to the PP opportunity identification and matching process are expected to restore the PP time to previously achieved and possibly even greater levels.

  17. chemf: A purely functional chemistry toolkit

    PubMed Central

    2012-01-01

    Background Although programming in a type-safe and referentially transparent style offers several advantages over working with mutable data structures and side effects, this style of programming has not seen much use in chemistry-related software. Since functional programming languages were designed with referential transparency in mind, these languages offer a lot of support when writing immutable data structures and side-effects free code. We therefore started implementing our own toolkit based on the above programming paradigms in a modern, versatile programming language. Results We present our initial results with functional programming in chemistry by first describing an immutable data structure for molecular graphs together with a couple of simple algorithms to calculate basic molecular properties before writing a complete SMILES parser in accordance with the OpenSMILES specification. Along the way we show how to deal with input validation, error handling, bulk operations, and parallelization in a purely functional way. At the end we also analyze and improve our algorithms and data structures in terms of performance and compare it to existing toolkits both object-oriented and purely functional. All code was written in Scala, a modern multi-paradigm programming language with a strong support for functional programming and a highly sophisticated type system. Conclusions We have successfully made the first important steps towards a purely functional chemistry toolkit. The data structures and algorithms presented in this article perform well while at the same time they can be safely used in parallelized applications, such as computer aided drug design experiments, without further adjustments. This stands in contrast to existing object-oriented toolkits where thread safety of data structures and algorithms is a deliberate design decision that can be hard to implement. Finally, the level of type-safety achieved by Scala highly increased the reliability of our code

  18. Are all maximally entangled states pure?

    NASA Astrophysics Data System (ADS)

    Cavalcanti, D.; Brandão, F. G. S. L.; Terra Cunha, M. O.

    2005-10-01

    We study if all maximally entangled states are pure through several entanglement monotones. In the bipartite case, we find that the same conditions which lead to the uniqueness of the entropy of entanglement as a measure of entanglement exclude the existence of maximally mixed entangled states. In the multipartite scenario, our conclusions allow us to generalize the idea of the monogamy of entanglement: we establish the polygamy of entanglement, expressing that if a general state is maximally entangled with respect to some kind of multipartite entanglement, then it is necessarily factorized of any other system.

  19. Electrostatic Precipitation in Nearly Pure Gaseous Nitrogen

    NASA Technical Reports Server (NTRS)

    Buhler, Charles; Calle, Carlos; Clements, Sid; Cox, Bobby; Ritz, Mindy

    2008-01-01

    Electrostatic precipitation was performed in a nearly pure gaseous nitrogen system as a possible remedy for black dust contaminant from high pressure 6000 psi lines at the NASA Kennedy Space Center. The results of a prototype electrostatic precipitator that was built and tested using nitrogen gas at standard atmospheric pressures is presented. High voltage pulsed waveforms are generated using a rotating spark gap system at 30 Hz. A unique dust delivery system utilizing the Venturi effect was devised that supplies a given amount of dust per unit time for testing purposes.

  20. Preparation of a pure molecular quantum gas.

    PubMed

    Herbig, Jens; Kraemer, Tobias; Mark, Michael; Weber, Tino; Chin, Cheng; Nägerl, Hanns-Christoph; Grimm, Rudolf

    2003-09-12

    An ultracold molecular quantum gas is created by application of a magnetic field sweep across a Feshbach resonance to a Bose-Einstein condensate of cesium atoms. The ability to separate the molecules from the atoms permits direct imaging of the pure molecular sample. Magnetic levitation enables study of the dynamics of the ensemble on extended time scales. We measured ultralow expansion energies in the range of a few nanokelvin for a sample of 3000 molecules. Our observations are consistent with the presence of a macroscopic molecular matter wave. PMID:12934014