Science.gov

Sample records for a-570-864 pure magnesium

  1. 76 FR 69284 - Pure Magnesium From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ... COMMISSION Pure Magnesium From China Determination On the basis of the record \\1\\ developed in the subject... order on pure magnesium from China would be likely to lead to continuation or recurrence of material... USITC Publication 4274 (October 2011), entitled Pure Magnesium from China: Investigation No....

  2. Isotopically pure magnesium isotope-24 is prepared from magnesium-24 oxide

    NASA Technical Reports Server (NTRS)

    Chellew, N. R.; Schilb, J. D.; Steunenberg, R. K.

    1968-01-01

    Apparatus is used to prepare isotopically pure magnesium isotope-24, suitable for use in neutron scattering and polarization experiments. The apparatus permits thermal reduction of magnesium-24 oxide with aluminum and calcium oxide, and subsequent vaporization of the product metal in vacuum. It uses a resistance-heated furnace tube and cap assembly.

  3. 77 FR 59979 - Pure Magnesium (Granular) From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... this five-year review. Background The Commission instituted this review on February 1, 2012 (77 FR 5049) and determined on May 7, 2012 that it would conduct an expedited review (77 FR 32668, June 1, 2012... COMMISSION Pure Magnesium (Granular) From China Determination On the basis of the record \\1\\ developed in...

  4. 77 FR 5049 - Pure Magnesium From China; Institution of a Five-Year Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-01

    ... duty order on imports of pure magnesium in granular form from China (66 FR 57936). Following expedited... continuation of the antidumping duty order on imports of pure magnesium in granular form from China (72 FR 5417..., subparts A, D, E, and F (19 CFR part 207), as most recently amended at 74 FR 2847 (January 16, 2009)....

  5. 76 FR 62040 - Pure Magnesium From the People's Republic of China: Final Results of Expedited Third Sunset...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-06

    ... element magnesium and produced by decomposing raw materials into magnesium metal. Pure primary magnesium..., pursuant to section 751(c) of the Act. See Initiation of Five-Year ``Sunset'' Review, 76 FR 31588 (June 1... Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May...

  6. 76 FR 33194 - Pure Magnesium From the People's Republic of China: Preliminary Results of the 2009-2010...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ... Fair Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691... Antidumping Duty Administrative Review, 73 FR 76336 (December 16, 2008)(``Pure Magnesium 06-07''); and... FR 76336 (December 16, 2008) and accompanying IDM (``2006-2007 Pure Magnesium Review'')...

  7. 76 FR 31635 - Pure Magnesium From China; Institution of a Five-Year Review Concerning the Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ... Department of Commerce issued an antidumping duty order on imports of pure magnesium from China (60 FR 25691... issued a continuation of the antidumping duty order on imports of pure magnesium from China (65 FR 64422... a continuation of the antidumping duty order on imports of pure magnesium from China (71 FR...

  8. 76 FR 72172 - Continuation of Antidumping Duty Order: Pure Magnesium From the People's Republic of China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-22

    ... produced by decomposing raw materials into magnesium metal. Pure primary magnesium is used primarily as a... ``Sunset'' Review, 76 FR 31588 (June 1, 2011). As a result of its review, the Department determined that... Expedited Third Sunset Review of the Antidumping Duty Order, 76 FR 62040 (October 6, 2011). On October...

  9. Proteomic profile of mouse fibroblasts exposed to pure magnesium extract.

    PubMed

    Zhen, Zhen; Luthringer, Bérengère; Yang, Li; Xi, Tingfei; Zheng, Yufeng; Feyerabend, Frank; Willumeit, Regine; Lai, Chen; Ge, Zigang

    2016-12-01

    Magnesium and its alloys gain wide attention as degradable biomaterials. In order to reveal the molecular mechanism of the influence of biodegradable magnesium on cells, proteomics analysis was performed in this work. After mouse fibroblasts (L929) were cultured with or without Mg degradation products (Mg-extract) for 8, 24, and 48h, changes in protein expression profiles were obtained using isobaric tags for relative and absolute quantitation (iTRAQ) coupled two dimensional liquid chromatography-tandem mass spectrometry (2D LC MS/MS). A total of 867 proteins were identified (relying on at least two peptides). Compared to the control group, 205, 282, and 217 regulated proteins were identified at 8, 24, and 48h, respectively. 65 common proteins were up or down- regulated within all the three time points, which were involved in various physiological and metabolic activities. Consistent with viability, proliferation, and cell cycle analysis, stimulated energy metabolism as well as protein synthesis pathways were discussed, indicating a possible effect of Mg-extract on L929 proliferation. Furthermore, endocytosis and focal adhesion processes were also discussed. This proteomics study uncovers early cellular mechanisms triggered by Mg degradation products and highlights the cytocompatibility of biodegradable metallic materials for biomedical applications such as stents or orthopaedic implants. PMID:27612743

  10. Low-temperature electron irradiation and annealing in pure magnesium

    SciTech Connect

    Simester, J.H.

    1982-01-01

    In this study of magnesium after 1.0 MeV electron irradiations at 1.55/sup 0/K, it has been observed that the damage production rate in Mg is (3.57 +- 0.03) x 10/sup -26/ ..cap omega..cm/(e/sup -/ cm/sup 2/). There is no evidence for thermal annealing up to 4/sup 0/K. The low temperature recovery in magnesium is found to consist of two broad substages between 4 to 14/sup 0/K, both of which exhibit evidence for correlated and uncorrelated recovery processes. The two substages are found to have very different frequency factors for annealing, and there is evidence that the recovery processes in the second substage are influenced by those in the first. A model for recovery is proposed using the split configuration in the plane which explains the first substage as being due to interstitial migration in the basal plane and the second to migration perpendicular to the plane.

  11. 77 FR 32668 - Pure Magnesium (Granular) From China; Scheduling of an Expedited Five-Year Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-01

    ... party group response to its notice of institution (77 FR 5049, February 1, 2012) of the subject five.... See 76 FR 61937 (October 6, 2011) and the newly revised Commission's Handbook on E-Filing, available... COMMISSION Pure Magnesium (Granular) From China; Scheduling of an Expedited Five-Year Review AGENCY:...

  12. 76 FR 7813 - Amended Final Results of the 2008-2009 Antidumping Duty Administrative Review: Pure Magnesium...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    ...-2009 Antidumping Duty Administrative Review of the Antidumping Duty Order, 75 FR 80791 (December 23...: Pure Magnesium From the People's Republic of China AGENCY: Import Administration, International Trade... the antidumping duty order on pure magnesium from the People's Republic of China (``PRC'').\\1\\...

  13. 75 FR 63440 - Pure Magnesium From the People's Republic of China: Extension of Time for the Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-15

    ..., 2009. See Pure Magnesium from the People's Republic of China: Preliminary Results of the 2008-2009 Antidumping Duty Administrative Review, 75 FR 34689 (June 18, 2010). The final results of review are currently... International Trade Administration Pure Magnesium From the People's Republic of China: Extension of Time for...

  14. Laser Surface Alloying of Copper, Manganese, and Magnesium with Pure Aluminum Substrate

    NASA Astrophysics Data System (ADS)

    Jiru, Woldetinsay G.; Sankar, M. Ravi; Dixit, Uday S.

    2016-03-01

    Laser surface alloying is one of the recent technologies used in the manufacturing sector for improving the surface properties of the metals. Light weight materials like aluminum alloys, titanium alloys, and magnesium alloys are used in the locomotive, aerospace, and structural applications. In the present work, an experimental study was conducted to improve the surface hardness of commercially pure aluminum plate. CO2 laser is used to melt pre-placed powders of pure copper, manganese, and magnesium. Microstructure of alloyed surface was analyzed using optical microscope. The best surface alloying was obtained at the optimum values of laser parameters, viz., laser power, scan speed, and laser beam diameter. In the alloyed region, microhardness increased from 30 HV0.5 to 430 HV0.5, while it was 60 HV0.5 in the heat-affected region. Tensile tests revealed some reduction in the strength and total elongation due to alloying. On the other hand, corrosion resistance improved.

  15. Biodegradable polymer for sealing porous PEO layer on pure magnesium: An in vitro degradation study

    NASA Astrophysics Data System (ADS)

    Alabbasi, Alyaa; Mehjabeen, Afrin; Kannan, M. Bobby; Ye, Qingsong; Blawert, Carsten

    2014-05-01

    An attempt was made to seal the porous silicate-based plasma electrolytic oxidation (PEO) layer on pure magnesium (Mg) with a biodegradable polymer, poly(L-lactide) (PLLA), to delay the localized degradation of magnesium-based implants in body fluid for better in-service mechanical integrity. Firstly, a silicate-based PEO coating on pure magnesium was performed using a pulsed constant current method. In order to seal the pores in the PEO layer, PLLA was coated using a two-step spin coating method. The performance of the PEO-PLLA Mg was evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The EIS results showed that the polarization resistance (Rp) of the PEO-PLLA Mg was close to two orders of magnitude higher than that of the PEO Mg. While the corrosion current density (icorr) of the pure Mg was reduced by 65% with the PEO coating, the PEO-PLLA coating reduced the icorr by almost 100%. As expected, the Rp of the PEO-PLLA Mg decreased with increase in exposure time. However, it was noted that the Rp of the PEO-PLLA Mg even after 100 h was six times higher than that of the PEO Mg after 48 h exposure, and did not show any visible localized attack.

  16. 75 FR 2108 - Pure Magnesium from the People's Republic of China: Extension of Time for the Preliminary Results...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-14

    ... Request Administrative Review, 74 FR 20278 (May 1, 2009). Respondent, Tianjin Magnesium International Co... Reviews and Requests for Revocation in Part, 74 FR 30052 (June 24, 2009). Currently, the preliminary... International Trade Administration Pure Magnesium from the People's Republic of China: Extension of Time for...

  17. 77 FR 38767 - Notice of Scope Rulings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-29

    ... Rulings, 77 FR 32568 (June 1, 2012). This current notice covers all scope rulings and anticircumvention... countervailing duty orders; December 13, 2011. A-570-864: Pure Magnesium in Granular Form from the People's Republic of China Requestor: US Magnesium LLC; granular magnesium ground in a third- country, such...

  18. Computational modeling of dynamic mechanical properties of pure polycrystalline magnesium under high loading strain rates

    NASA Astrophysics Data System (ADS)

    Li, Qizhen

    2015-09-01

    Computational simulations were performed to investigate the dynamic mechanical behavior of pure polycrystalline magnesium under different high loading strain rates with the values of 800, 1000, 2000, and 3600 s-1. The Johnson-Cook model was utilized in the simulations based on finite element modeling. The results showed that the simulations provided well-matched predictions of the material behavior such as the strain rate-time history, the stress-strain curve, and the temperature increase. Under high loading strain rates, the tested material experienced linear strain hardening at the early stage of plastic deformation, increased strain hardening at the intermediate plastic deformation region, and decreased strain hardening at the region before fracture. The strain hardening rates for the studied high loading strain rate cases do not vary much with the change of strain rates.

  19. Tension-compression-tension tertiary twins in coarse-grained polycrystalline pure magnesium at room temperature

    DOE PAGESBeta

    Yu, Qin; Jiang, Yanyao; Wang, Jian

    2015-04-07

    Using electron backscatter diffraction, the microstructural features of tension–compression–tension (T–C–T) tertiary twins are studied in coarse-grained pure polycrystalline magnesium subjected to monotonic compression along the extrusion direction in ambient air. T–C–T tertiary twins are developed due to the formation of a compression–tension double twin inside a primary tension twin. All the observed T–C–T twin variants are of TiCjTj type. TiCi+1Ti+1 (or TiCi–1Ti–1) variants are observed more frequently than TiCi+2Ti+2 (or TiCi–2Ti–2) variants. Moreover, the number of tertiary twin lamellae increases with the applied compressive strain.

  20. Magnesium

    MedlinePlus

    ... supplements are available? Magnesium is available in multivitamin-mineral supplements and other dietary supplements . Forms of magnesium ... higher intakes of magnesium have a higher bone mineral density , which is important in reducing the risk ...

  1. 76 FR 1404 - Pure Magnesium in Granular Form From the People's Republic of China: Rescission of Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... People's Republic of China, 66 FR 57936 (November 19, 2001) (``Pure Magnesium in Granular Form Order... Circumstances Review, 75 FR 51002, (August 18, 2010) (``Initiation of CCR''). DATES: Effective Date: January 10... Granular Form Order, 66 FR 57936. \\4\\ See Initiation of CCR, 75 FR at 51003. On August 23, 2010,...

  2. 77 FR 71578 - Pure Magnesium in Granular Form From the People's Republic of China; Final Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... Antidumping Duty Order: Pure Magnesium in Granular Form from the People's Republic of China, 66 FR 57936... Administrative Review, 77 FR 46030 (August 2, 2012) (``Preliminary Results''). We invited interested parties to... Administrative Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10,...

  3. 77 FR 28570 - Pure Magnesium From the People's Republic of China: Notice of Court Decision Not in Harmony With...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-15

    ... Administrative Review, 73 FR 76336 (December 16, 2008) and accompanying Issues and Decision Memorandum (``Final... Administrative Review of the Antidumping Duty Order, 76 FR 76945 (December 9, 2011). Amended Final Determination... International Trade Administration Pure Magnesium From the People's Republic of China: Notice of Court...

  4. 76 FR 70709 - Pure Magnesium From the People's Republic of China: Second Extension of Time for the Final...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-15

    ... Antidumping Duty Administrative Review, 76 FR 33194 (June 8, 2011). On September 16, 2011, the Department... Final Results of the Antidumping Duty Administrative Review, 76 FR 59111 (September 23, 2011). Extension... International Trade Administration Pure Magnesium From the People's Republic of China: Second Extension of...

  5. 76 FR 1403 - Pure Magnesium From the People's Republic of China: Extension of Time Limit for the Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... Investigation; Opportunity To Request Administrative Review, 75 FR 23236 (May 3, 2010). Respondent, Tianjin... Requests for Revocation In Part, 75 FR 37759 (June 30, 2010). Currently, the preliminary results of... International Trade Administration Pure Magnesium From the People's Republic of China: Extension of Time...

  6. 76 FR 59111 - Pure Magnesium From the People's Republic of China: Extension of Time for the Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ... Antidumping Duty Administrative Review, 76 FR 33194 (June 8, 2011). The final results of review are currently... Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005). Accordingly... International Trade Administration Pure Magnesium From the People's Republic of China: Extension of Time for...

  7. 77 FR 33165 - Pure Magnesium in Granular Form From the People's Republic of China: Final Results of Expedited...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-05

    ..., alumina (Al2O3), calcium aluminate, soda ash, hydrocarbons, graphite, coke, silicon, rare earth metals... expedited review of this order. \\1\\ See Initiation of Five-Year (``Sunset'') Review, 77 FR 4995 (February 1... Value: Antidumping Duty Investigation of Pure Magnesium From the Russian Federation, 60 FR 25691 (May...

  8. 75 FR 51002 - Pure Magnesium In Granular Form from the People's Republic of China: Initiation of Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-18

    ... (Al2O3), calcium aluminate, soda ash, hydrocarbons, graphite, coke, silicon, rare earth metals/mischmetal... circumstances review to determine whether CMN is the successor-in-interest to Minmetals Precious &Rare Minerals...: Pure Magnesium in Granular Form From the People's Republic of China, 66 FR 57936 (November 19,...

  9. In vitro corrosion of pure magnesium and AZ91 alloy-the influence of thin electrolyte layer thickness.

    PubMed

    Zeng, Rong-Chang; Qi, Wei-Chen; Zhang, Fen; Li, Shuo-Qi

    2016-03-01

    In vivo degradation predication faces a huge challenge via in vitro corrosion test due to the difficulty for mimicking the complicated microenvironment with various influencing factors. A thin electrolyte layer (TEL) cell for in vitro corrosion of pure magnesium and AZ91 alloy was presented to stimulate the in vivo corrosion in the micro-environment built by the interface of the implant and its neighboring tissue. The results demonstrated that the in vivo corrosion of pure Mg and the AZ91 alloy was suppressed under TEL condition. The AZ91 alloy was more sensitive than pure Mg to the inhibition of corrosion under a TEL thickness of less than 200 µm. The TEL thickness limited the distribution of current, and thus localized corrosion was more preferred to occur under TEL condition than in bulk solution. The TEL cell might be an appropriate approach to simulating the in vivo degradation of magnesium and its alloys. PMID:26816655

  10. In vitro corrosion of pure magnesium and AZ91 alloy—the influence of thin electrolyte layer thickness

    PubMed Central

    Zeng, Rong-Chang; Qi, Wei-Chen; Zhang, Fen; Li, Shuo-Qi

    2016-01-01

    In vivo degradation predication faces a huge challenge via in vitro corrosion test due to the difficulty for mimicking the complicated microenvironment with various influencing factors. A thin electrolyte layer (TEL) cell for in vitro corrosion of pure magnesium and AZ91 alloy was presented to stimulate the in vivo corrosion in the micro-environment built by the interface of the implant and its neighboring tissue. The results demonstrated that the in vivo corrosion of pure Mg and the AZ91 alloy was suppressed under TEL condition. The AZ91 alloy was more sensitive than pure Mg to the inhibition of corrosion under a TEL thickness of less than 200 µm. The TEL thickness limited the distribution of current, and thus localized corrosion was more preferred to occur under TEL condition than in bulk solution. The TEL cell might be an appropriate approach to simulating the in vivo degradation of magnesium and its alloys. PMID:26816655

  11. Tension-compression-tension tertiary twins in coarse-grained polycrystalline pure magnesium at room temperature

    SciTech Connect

    Yu, Qin; Jiang, Yanyao; Wang, Jian

    2015-04-07

    Using electron backscatter diffraction, the microstructural features of tension–compression–tension (T–C–T) tertiary twins are studied in coarse-grained pure polycrystalline magnesium subjected to monotonic compression along the extrusion direction in ambient air. T–C–T tertiary twins are developed due to the formation of a compression–tension double twin inside a primary tension twin. All the observed T–C–T twin variants are of TiCjTj type. TiCi+1Ti+1 (or TiCi–1Ti–1) variants are observed more frequently than TiCi+2Ti+2 (or TiCi–2Ti–2) variants. Moreover, the number of tertiary twin lamellae increases with the applied compressive strain.

  12. Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium

    NASA Astrophysics Data System (ADS)

    Biswas, Somjeet; Singh, D. Satyaveer; Beausir, Benoît; Toth, Laszlo S.; Suwas, Satyam

    2015-06-01

    This paper deals with dynamic recrystallization (DRX), static recrystallization, and grain growth phenomena of pure magnesium after equal channel angular pressing (ECAP) by route A and BC at 523 K (250 °C) followed by 80 pct cold rolling. The ECAP-deformed and the subsequently rolled samples were annealed at 373 K and 773 K (100 °C and 500 °C). The associated changes in the microstructure and texture were studied using electron back-scattered diffraction. ECAP produced an average grain size of ~12 to 18 µm with B and C2 fiber textures. Subsequent rolling led to an average grain size ~8 to 10 µm with basal texture fiber parallel to ND. There was no noticeable increase in the average grain size on annealing at 373 K (100 °C). However, significant increase in the average grain size occurred at 773 K (500 °C). The occurrence of different DRX mechanisms was detected: discontinuous dynamic recrystallization was attributed to basal slip activity and continuous dynamic recovery and recrystallization to prismatic/pyramidal slip systems. Only continuous static recrystallization could be observed on annealing.

  13. 75 FR 67079 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-01

    ... explained in Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954... Polyethylene Terephthalate (Pet) Film, A- 11/1/09-10/31/10 570-924 Pure Magnesium In Granular Form, A-570-864. 11/1/09-10/31/10 Refined Brown Aluminum Oxide, A-570-882.... 11/1/09-10/31/10 Ukraine: Certain...

  14. 76 FR 67413 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-01

    ... explained in Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954...; Administrative Protective Order Procedures, 76 FR 39263, (July 6, 2011). Further, in accordance with section 351... 11/1/10-10/31/11 Pure Magnesium In Granular Form A-570-864........ 11/1/10-10/31/11 Refined...

  15. 76 FR 53408 - Pure Magnesium From the People's Republic of China: Rescission of Antidumping Duty Administrative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ... weight primarily the element magnesium and produced by decomposing raw materials into magnesium metal... Countervailing Duty Administrative Reviews and Request for Revocation in Part, 76 FR 37781 (June 28, 2011...; Opportunity To Request Administrative Review, 76 FR 24458 (May 2, 2011). \\4\\ See letter from U.S....

  16. Magnesium

    NASA Astrophysics Data System (ADS)

    Bechtel, H.; Bulian, W.; Bungardt, K.; Gürs, K.; Gürs, U.; Helling, W.; Kyri, H.; Laue, H. J.; Mahler, W.; Matting, A.; Meyer, F. R.; Mialki, W.; Ritter, F.; Ruge, J.; Saur, G.; Simon, W.; Strnat, K.; Weber, R.; Weigand, H. H.; Weik, H.; Ziesler, H.; Borchers, Heinz; Schmidt, Ernst

    Magnesium wird überwiegend durch Schmelzflußelektrolyse hergestellt. Das dabei anfallende Reinmagnesium hat einen Mg-Gehalt von etwa 99,9%. Hauptbeimengung ist das Eisen; Silizium und Aluminium sind nur in Spuren vorhanden. Der Anwendungsumfang des Reinmagnesiums ist gering; dagegen werden Magnesiumlegierungen zunehmend, insbesondere für den Druckguß verwendet. Neben den bis etwa zum Jahre 1950 allein gebräuchlichen Mg-Mn-, Mg-Al- und Mg-Al-Zn-Legierungen werden heute mehr und mehr die besonders warmfesten Legierungen mit Zusätzen von Zirkon, Thorium und Seltenen Erden hergestellt (siehe dazu auch Abschnitt Seltene Erden). Als Umhüllungsmaterial für Uranstäbe dient die Legierung Magnox A 12, die nach [H 3] neben 1 % Al noch geringe Mengen an Ca und Ba enthält. In den in Deutschland üblichen Kurzzeichen (DIN 1729) werden die chemischen Symbole und der ungefähre Gehalt der wichtigsten Legierungselemente angegeben. Gußlegierungen werden zusätzlich durch ein G (Sandguß oder Kokillenguß) oder ein D (Druckguß) gekennzeichnet (siehe Tab. 5).

  17. 77 FR 46030 - Pure Magnesium in Granular Form From the People's Republic of China: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-02

    ..., hydrocarbons, graphite, coke, silicon, rare earth metals/mischmetal, cryolite, silica/fly ash, magnesium oxide... Countervailing Duty Administrative Reviews and Request for Revocation In Part, 76 FR 82268 (December 30, 2011... FR 67413 (November 1, 2011). \\3\\ See Initiation. In the Initiation, the Department stated that if...

  18. Electrodeposition of magnesium and magnesium/aluminum alloys

    DOEpatents

    Mayer, A.

    1988-01-21

    Electrolytes and plating solutions for use in processes for electroplating and electroforming pure magnesium and alloys of aluminum and magnesium and also electrodeposition processes. An electrolyte of this invention is comprised of an alkali metal fluoride or a quaternary ammonium halide, dimethyl magnesium and/or diethyl magnesium, and triethyl aluminum and/or triisobutyl aluminum. An electrolyte may be dissolved in an aromatic hydrocarbon solvent to form a plating solution. The proportions of the component compounds in the electrolyte are varied to produce essentially pure magnesium or magnesium/aluminum alloys having varying selected compositions.

  19. Electrodeposition of magnesium and magnesium/aluminum alloys

    DOEpatents

    Mayer, Anton

    1988-01-01

    Electrolytes and plating solutions for use in processes for electroplating and electroforming pure magnesium and alloys of aluminum and magnesium and also electrodeposition processes. An electrolyte of this invention is comprised of an alkali metal fluoride or a quaternary ammonium halide, dimethyl magnesium and/or diethyl magnesium, and triethyl aluminum and/or triisobutyl aluminum. An electrolyte may be dissolved in an aromatic hydrocarbon solvent to form a plating solution. The proportions of the component compounds in the electrolyte are varied to produce essentially pure magnesium or magnesium/aluminum alloys having varying selected compositions.

  20. Electrodeposition of magnesium and magnesium/aluminum alloys

    SciTech Connect

    Mayer, A.

    1988-10-18

    Electrolytes and plating solutions for use in processes for electroplating and electroforming pure magnesium and alloys of aluminum and magnesium and also electrodeposition processes. An electrolyte of this invention is comprised of an alkali metal fluoride or a quaternary ammonium halide, dimethyl magnesium and/or diethyl magnesium, and triethyl aluminum and/or triisobutyl aluminum. An electrolyte may be dissolved in an aromatic hydrocarbon solvent to form a plating solution. The proportions of the component compounds in the electrolyte are varied to produce essentially pure magnesium or magnesium/alumnum alloys having varying selected compositions.

  1. Magnesium Gluconate

    MedlinePlus

    Magnesium gluconate is used to treat low blood magnesium. Low blood magnesium is caused by gastrointestinal disorders, prolonged vomiting or ... disease, or certain other conditions. Certain drugs lower magnesium levels as well.This medication is sometimes prescribed ...

  2. Degradation and biological properties of Ca-P contained micro-arc oxidation self-sealing coating on pure magnesium for bone fixation

    PubMed Central

    Wang, Weidan; Wan, Peng; Liu, Chen; Tan, Lili; Li, Weirong; Li, Lugee; Yang, Ke

    2015-01-01

    Poor corrosion resistance is one of the main disadvantages for biodegradable magnesium-based metals, especially applied for bone fixation, where there is a high demand of bio-mechanical strength and stability. Surface coating has been proved as an effective method to control the in vivo degradation. In this study a Ca-P self-sealing micro-arc oxidation (MAO) coating was studied to verify its efficacy and biological properties by in vitro and in vivo tests. It was found that the MAO coating could effectively retard the degradation according to immersion and electrochemical tests as well as 3D reconstruction by X-ray tomography after implantation. The MAO coating exhibited no toxicity and could stimulate the new bone formation. Therefore, the Ca-P self-sealing MAO coating could be a potential candidate for application of biodegradable Mg-based implant in bone fixations. PMID:26816635

  3. Influence of ECAP process on mechanical and corrosion properties of pure Mg and ZK60 magnesium alloy for biodegradable stent applications

    PubMed Central

    Mostaed, Ehsan; Vedani, Maurizio; Hashempour, Mazdak; Bestetti, Massimiliano

    2014-01-01

    Equal channel angular pressing (ECAP) was performed on ZK60 alloy and pure Mg in the temperature range 150–250 °C. A significant grain refinement was detected after ECAP, leading to an ultrafine grain size (UFG) and enhanced formability during extrusion process. Comparing to conventional coarse grained samples, fracture elongation of pure Mg and ZK60 alloy were significantly improved by 130% and 100%, respectively, while the tensile strength remained at high level. Extrusion was performed on ECAP processed billets to produce small tubes (with outer/inner diameter of 4/2.5 mm) as precursors for biodegradable stents. Studies on extruded tubes revealed that even after extrusion the microstructure and microhardness of the UFG ZK60 alloy were almost stable. Furthermore, pure Mg tubes showed an additional improvement in terms of grain refining and mechanical properties after extrusion. Electrochemical analyses and microstructural assessments after corrosion tests demonstrated two major influential factors in corrosion behavior of the investigated materials. The presence of Zn and Zr as alloying elements simultaneously increases the nobility by formation of a protective film and increase the local corrosion damage by amplifying the pitting development. ECAP treatment decreases the size of the second phase particles thus improving microstructure homogeneity, thereby decreasing the localized corrosion effects. PMID:25482411

  4. Magnesium basics

    PubMed Central

    Ketteler, Markus

    2012-01-01

    As a cofactor in numerous enzymatic reactions, magnesium fulfils various intracellular physiological functions. Thus, imbalance in magnesium status—primarily hypomagnesaemia as it is seen more often than hypermagnesaemia—might result in unwanted neuromuscular, cardiac or nervous disorders. Measuring total serum magnesium is a feasible and affordable way to monitor changes in magnesium status, although it does not necessarily reflect total body magnesium content. The following review focuses on the natural occurrence of magnesium and its physiological function. The absorption and excretion of magnesium as well as hypo- and hypermagnesaemia will be addressed. PMID:26069819

  5. Magnesium Oxide

    MedlinePlus

    ... repeatedly. Magnesium oxide also is used as a dietary supplement when the amount of magnesium in the diet ... any products such as vitamins, minerals, or other dietary supplements. You should bring this list with you each ...

  6. Magnesium Hydroxide

    MedlinePlus

    Magnesium hydroxide is used on a short-term basis to treat constipation.This medication is sometimes prescribed ... Magnesium hydroxide come as a tablet and liquid to take by mouth. It usually is taken as ...

  7. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap through Combined Refining and Solid Oxide Membrane Electrolysis Processes

    SciTech Connect

    Xiaofei Guan; Peter A. Zink; Uday B. Pal; Adam C. Powell

    2012-01-01

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.% Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the magnesium content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapor. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium.

  8. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap Through Combined Refining and Solid Oxide Membrane (SOM) Electrolysis Processes

    SciTech Connect

    Guan, Xiaofei; Zink, Peter; Pal, Uday

    2012-03-11

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.%Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the Mg content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapors in a separate condenser. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium; could not collect and weigh all of the magnesium recovered.

  9. Ultrasound-assisted synthesis of magnesium hydroxide nanoparticles from magnesium.

    PubMed

    Baidukova, Olga; Skorb, Ekaterina V

    2016-07-01

    Acoustic cavitation in water provides special kinetic and thermodynamic conditions for chemical synthesis and nanostructuring of solids. Using cavitation phenomenon, we obtained magnesium hydroxide from pure magnesium. This approach allows magnesium hydroxide to be synthesized without the requirement of any additives and non-aqueous solvents. Variation of sonochemical parameters enabled a total transformation of the metal to nanosized brucite with distinct morphology. Special attention is given to the obtaining of platelet-shaped, nanometric and de-agglomerated powders. The products of the synthesis were characterized by transmission electron microscopy (TEM), electron diffraction (ED), scanning electron microscopy (SEM) and X-ray diffraction (XRD). PMID:26964968

  10. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2010-01-01

    Seawater and natural brines accounted for about 40 percent of U.S. magnesium compounds production in 2009. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Chemicals in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover, and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta from its operation mentioned above.

  11. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2011-01-01

    Seawater and natural brines accounted for about 54 percent of U.S. magnesium compounds production in 2010. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash-Wendover and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its operation mentioned above.

  12. Magnesium Test

    MedlinePlus

    ... Mg; Mag Formal name: Magnesium Related tests: Calcium , Potassium , Phosphorus , PTH , Vitamin D At a Glance Test ... can, over time, cause persistently low calcium and potassium levels, it may be checked to help diagnose ...

  13. Production of magnesium metal

    DOEpatents

    Blencoe, James G [Harriman, TN; Anovitz, Lawrence M [Knoxville, TN; Palmer, Donald A [Oliver Springs, TN; Beard, James S [Martinsville, VA

    2010-02-23

    A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

  14. Production of magnesium metal

    DOEpatents

    Blencoe, James G.; Anovitz, Lawrence M.; Palmer, Donald A.; Beard, James S.

    2012-04-10

    A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention also relates to the magnesium metal produced by the processes described herein.

  15. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2012-01-01

    Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by Premier Magnesia. Intrepid Potash Wendover LLC and Great Salt Lake Minerals Corp. recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from seawater by SPI Pharma Inc. in Delaware and Premier Magnesia in Florida, and by Martin Marietta from its brine operation in Michigan.

  16. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2002-01-01

    Seawater and natural brines accounted for about 60% of US magnesium compounds production in 2001. Dead-burned and caustic-calcined magnesias were recovered from seawater in Florida by Premier Chemicals. They were also recovered from Michigan well brines by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And Premier Chemicals recovered dead-burned and caustic-calcined magnesias from magnesite in Nevada. Reilly Industries and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah.

  17. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2004-01-01

    Dead-burned and caustic-calcined magnesias were recovered from seawater by Premier Chemicals in Florida; from well brines in Michigan by Dow Chemical, Martin Marietta Magnesia Specialties, and Rohm & Haas; and from magnesite in Nevada by Premier Chemicals. Reilly Industries and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah.

  18. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2007-01-01

    Seawater and natural brines accounted for about 52 percent of U.S. magnesium compounds production in 2006. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties from well brines in Michigan. Caustic-calcined magnesia was recovered from sea-water by Premier Chemicals in Florida; from well brines in Michigan by Martin Marietta and Rohm and Haas; and from magnesite in Nevada by Premier Chemicals. Intrepid Potash-Wendover and Great Salt Lake Minerals recovered magnesium chloride brines from the Great Salt Lake in Utah. Magnesium hydroxide was produced from brucite by Applied Chemical Magnesias in Texas, from seawater by SPI Pharma in Delaware and Premier Chemicals in Florida, and by Martin Marietta and Rohm and Haas from their operations mentioned above. About 59 percent of the magnesium compounds consumed in the United States was used for refractories that are used mainly to line steelmaking furnaces. The remaining 41 percent was consumed in agricultural, chemical, construction, environmental and industrial applications.

  19. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2001-01-01

    Seawater and natural brines accounted for about 63% of US magnesium compounds production during 2000. Premier Services in Florida, Dow Chemical in Michigan, Martin Marietta Magnesia Specialties, and Rohm & Haas recovered dead-burned and caustic-calcined magnesias from seawater. And Premier Services' recoveries, in Nevada, were from magnasite.

  20. Corrosion in Magnesium and a Magnesium Alloy

    NASA Astrophysics Data System (ADS)

    Akavipat, Sanay

    Magnesium and a magnesium alloy (AZ91C) have been ion implanted over a range of ions energies (50 to 150 keV) and doses (1 x 10('16) to 2 x 10('17) ions/cm('2)) to modify the corrosion properties of the metals. The corrosion tests were done by anodic polarization in chloride -free and chloride-containing aqueous solutions of a borated -boric acid with a pH of 9.3. Anodic polarization measurements showed that some implantations could greatly reduce the corrosion current densities at all impressed voltages and also increased slightly the pitting potential, which indicated the onset of the chloride attack. These improvements in corrosion resistance were caused by boron implantations into both types of samples. However, iron implantations were found to improve only the magnesium alloy. To study the corrosion in more detail, Scanning Auger Microprobe Spectrometer (SAM), Scanning Electron Microscope (SEM) with an X-ray Energy Spectrometry (XES) attachment, and Transmission Electron Microscope (TEM) measurements were used to analyze samples before, after, and at various corrosion stages. In both the unimplanted pure magnesium and AZ91C samples, anodic polarization results revealed that there were three active corrosion stages (Stages A, C, and E) and two passivating stages (Stages B and D). Examination of Stages A and B in both types of samples showed that only a mild, generalized corrosion had occurred. In Stage C of the TD samples, a pitting breakdown in the initial oxide film was observed. In Stage C of the AZ91C samples, galvanic and intergranular attack around the Mg(,17)Al(,12) intermetallic islands and along the matrix grain boundaries was observed. Stage D of both samples showed the formation of a thick, passivating oxygen containing, probably Mg(OH)(,2) film. In Stage E, this film was broken down by pits, which formed due to the presence of the chloride ions in both types of samples. Stages A through D of the unimplanted samples were not seen in the boron or iron

  1. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2003-01-01

    Seawater and natural brines accounted for about 60 percent of U.S. magnesium compounds production during 2002. Dead-burned and caustic-calcined magnesias were recovered from seawater by Premier Chemicals in Florida. They were also recovered from well brines in Michigan by Dow Chemical, Martin Marietta Magnesia Specialties and Rohm & Haas. And they were recovered from magnesite in Nevada by Premier Chemicals.

  2. Magnesium compounds

    USGS Publications Warehouse

    Kramer, D.A.

    2006-01-01

    In 2005, seawater and natural brines accounted for 51% of US magnesium compounds production. World magnesia production was estimated to be 14.5 Mt. Most of the production came from China, North Korea, Russia and Turkey. Although no specific production figures are available, Japan and the United States are estimated to account for almost one-half of the world's capacity from seawater and brines.

  3. Magnesium in diet

    MedlinePlus

    Diet - magnesium ... Magnesium is needed for more than 300 biochemical reactions in the body. It helps to maintain normal ... There is ongoing research into the role of magnesium in preventing and managing disorders such as high ...

  4. Low magnesium level

    MedlinePlus

    Low magnesium level is a condition in which the amount of magnesium in the blood is lower than normal. The medical ... that convert or use energy ( metabolism ). When the level of magnesium in the body drops below normal, ...

  5. Electrodeposition of aluminium, aluminium/magnesium alloys, and magnesium from organometallic electrolytes

    SciTech Connect

    Mayer, A.

    1988-01-01

    The electrodeposition of aluminum, magnesium, and the combination of these metals from nonaqueous media is discussed. Plating baths for depositing Al/Mg alloys or for plating essentially pure Mg were developed. These solutions contain alkali meal fluoride or quaternary ammonium halide/aluminium alkyl complexes and dialkyl magnesium dissolved in aromatic hydrocarbons. Alloy deposits over the whole composition range can be plated from these solutions by varying the relative quantities of the aluminium and magnesium alkyls and by changing the bath-operating parameters. 18 refs., 4 figs.

  6. Magnesium and sudden death.

    PubMed

    Leary, W P; Reyes, A J

    1983-10-22

    Magnesium deficiency may result from reduced dietary intake of the ion or increased losses in sweat, urine or faeces. Stress potentiates magnesium deficiency, and an increased incidence of sudden death associated with ischaemic heart disease is found in some areas in which soil and drinking water lack magnesium. Furthermore, it has been demonstrated experimentally that reduction of the plasma magnesium level is associated with arterial spasm. Careful studies are required to assess the clinical importance of magnesium and the benefits of magnesium supplementation in man. PMID:6353622

  7. Choline Magnesium Trisalicylate

    MedlinePlus

    Choline magnesium trisalicylate is used to relieve the pain, tenderness, inflammation (swelling), and stiffness caused by arthritis and painful ... used to relieve pain and lower fever. Choline magnesium trisalicylate is in a class of nonsteroidal anti- ...

  8. Exoelectron emission from magnesium surfaces

    NASA Astrophysics Data System (ADS)

    Klar, F.; Bansmann, J.; Glaefeke, H.; Fitting, H.-J.; Meiwes-Broer, K.-H.

    1999-12-01

    Clean magnesium surfaces were created by evaporating Mg onto silicon wafers. When exposing the Mg surface to a low oxygen partial pressure, an exoelectron emission (EEE) is observed after a time delay of the order of several hours after evaporation. On a much shorter time scale, similar effects in exoemission from Mg and alkali metals have been observed previously. The results are discussed within a 'potential emission' model of exoelectrons during oxygen capture at the pure Mg surface, but extending the model by including an escape mechanism. A macroscopic quantitative description of the model is given, which is in good agreement with our measurements.

  9. The Corrosion of Magnesium and of the Magnesium Aluminum Alloys Containing Manganese

    NASA Technical Reports Server (NTRS)

    Boyer, J A

    1927-01-01

    The extensive use of magnesium and its alloys in aircraft has been seriously handicapped by the uncertainties surrounding their resistance to corrosion. This problem has been given intense study by the American Magnesium Corporation and at the request of the Subcommittee on Materials for Aircraft of the National Advisory Committee for Aeronautics this report was prepared on the corrosion of magnesium. The tentative conclusions drawn from the experimental facts of this investigation are as follows: the overvoltage of pure magnesium is quite high. On immersion in salt water the metal corrodes with the liberation of hydrogen until the film of corrosion product lowers the potential to a critical value. When the potential reaches this value it no longer exceeds the theoretical hydrogen potential plus the overvoltage of the metal. Rapid corrosion consequently ceases. When aluminum is added, especially when in large amounts, the overvoltage is decreased and hydrogen plates out at a much lower potential than with pure magnesium. The addition of small amount of manganese raises the overvoltage back to practically that of pure metal, and the film is again negative.

  10. Magnesium and Space Flight

    PubMed Central

    Smith, Scott M.; Zwart, Sara R.

    2015-01-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD) before, during, and after 4–6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female), 35 ± 7 years old). We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4–6-month space missions. PMID:26670248

  11. Magnesium and Space Flight

    NASA Technical Reports Server (NTRS)

    Smith, Scott M.; Zwart, Sara R.

    2016-01-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in astronauts before, during, and after space missions, in 43 astronauts (34 male, 9 female) on 4-6 month space flight missions. We also studied individuals participating in a ground analog of space flight, (head-down tilt bed rest, n=27, 35 +/- 7 y). We evaluated serum concentration and 24-hour urinary excretion of magnesium along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-d space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4- to 6-month space missions.

  12. Magnesium and Space Flight.

    PubMed

    Smith, Scott M; Zwart, Sara R

    2015-12-01

    Magnesium is an essential nutrient for muscle, cardiovascular, and bone health on Earth, and during space flight. We sought to evaluate magnesium status in 43 astronauts (34 male, 9 female; 47 ± 5 years old, mean ± SD) before, during, and after 4-6-month space missions. We also studied individuals participating in a ground analog of space flight (head-down-tilt bed rest; n = 27 (17 male, 10 female), 35 ± 7 years old). We evaluated serum concentration and 24-h urinary excretion of magnesium, along with estimates of tissue magnesium status from sublingual cells. Serum magnesium increased late in flight, while urinary magnesium excretion was higher over the course of 180-day space missions. Urinary magnesium increased during flight but decreased significantly at landing. Neither serum nor urinary magnesium changed during bed rest. For flight and bed rest, significant correlations existed between the area under the curve of serum and urinary magnesium and the change in total body bone mineral content. Tissue magnesium concentration was unchanged after flight and bed rest. Increased excretion of magnesium is likely partially from bone and partially from diet, but importantly, it does not come at the expense of muscle tissue stores. While further study is needed to better understand the implications of these findings for longer space exploration missions, magnesium homeostasis and tissue status seem well maintained during 4-6-month space missions. PMID:26670248

  13. Recycling of Magnesium Alloy Employing Refining and Solid Oxide Membrane (SOM) Electrolysis

    NASA Astrophysics Data System (ADS)

    Guan, Xiaofei; Zink, Peter A.; Pal, Uday B.; Powell, Adam C.

    2013-04-01

    Pure magnesium was recycled from partially oxidized 50.5 wt pct Mg-Al scrap alloy and AZ91 Mg alloy (9 wt pct Al, 1 wt pct Zn). Refining experiments were performed using a eutectic mixture of MgF2-CaF2 molten salt (flux). During the experiments, potentiodynamic scans were performed to determine the electrorefining potentials for magnesium dissolution and magnesium bubble nucleation in the flux. The measured electrorefining potential for magnesium bubble nucleation increased over time as the magnesium content inside the magnesium alloy decreased. Potentiostatic holds and electrochemical impedance spectroscopy were employed to measure the electronic and ionic resistances of the flux. The electronic resistivity of the flux varied inversely with the magnesium solubility. Up to 100 pct of the magnesium was refined from the Mg-Al scrap alloy by dissolving magnesium and its oxide into the flux followed by argon-assisted evaporation of dissolved magnesium and subsequently condensing the magnesium vapor. Solid oxide membrane electrolysis was also employed in the system to enable additional magnesium recovery from magnesium oxide in the partially oxidized Mg-Al scrap. In an experiment employing AZ91 Mg alloy, only the refining step was carried out. The calculated refining yield of magnesium from the AZ91 alloy was near 100 pct.

  14. Magnesium industry overview

    SciTech Connect

    Clow, B.B.

    1996-10-01

    Magnesium products provide an excellent strength-to-weight ratio, good fatigue strength, high impact strength, good corrosion resistance, high-speed machinability, and good thermal and electrical conductivities. As a result, applications are expanding in almost every industry. Dozens of automotive components are now made of magnesium, including steering wheels, valve covers, and seat frames. Magnesium alloys are also used in computer housings, in-line roller skates, golf clubs, tennis racquets, and baseball bats. Good strength and stiffness at both room and elevated temperatures make magnesium alloys especially valuable for aerospace applications. This article presents an overview of magnesium technology, world production, increasing demand, and recycling.

  15. Magnesium and the Athlete.

    PubMed

    Volpe, Stella Lucia

    2015-01-01

    Magnesium is the fourth most abundant mineral and the second most abundant intracellular divalent cation in the body. It is a required mineral that is involved in more than 300 metabolic reactions in the body. Magnesium helps maintain normal nerve and muscle function, heart rhythm (cardiac excitability), vasomotor tone, blood pressure, immune system, bone integrity, and blood glucose levels and promotes calcium absorption. Because of magnesium's role in energy production and storage, normal muscle function, and maintenance of blood glucose levels, it has been studied as an ergogenic aid for athletes. This article will cover the general roles of magnesium, magnesium requirements, and assessment of magnesium status as well as the dietary intake of magnesium and its effects on exercise performance. The research articles cited were limited from those published in 2003 through 2014. PMID:26166051

  16. Solubility of magnesium carbonate in natural waters

    USGS Publications Warehouse

    Wells, R.C.

    1915-01-01

    (1) Under atmospheric conditions it appears possible to attain practically the same state in a solution saturated with MgCO33H2O, whether one starts with a solution containing an excess of magnesium bicarbonate or with the pure trihydrate and water, but the adjustment occurs very slowly. The solution finally contains 0.36 g. magnesium and 1.01 g. carbon dioxide per liter at 20??. (2) The solubility found for magnesite, however, is much smaller, viz., 0.02 g. magnesium and 0.07 g. carbon dioxide per liter. (3) Certain natural waters, freely exposed to the atmosphere, appear to be supersaturated with respect to magnesite but none approaches very closely to the point of saturation of the trihydrate MgCO3.3H2O.

  17. Magnesium in depression.

    PubMed

    Serefko, Anna; Szopa, Aleksandra; Wlaź, Piotr; Nowak, Gabriel; Radziwoń-Zaleska, Maria; Skalski, Michał; Poleszak, Ewa

    2013-01-01

    Magnesium is one of the most essential mineral in the human body, connected with brain biochemistry and the fluidity of neuronal membrane. A variety of neuromuscular and psychiatric symptoms, including different types of depression, was observed in magnesium deficiency. Plasma/serum magnesium levels do not seem to be the appropriate indicators of depressive disorders, since ambiguous outcomes, depending on the study, were obtained. The emergence of a new approach to magnesium compounds in medical practice has been seen. Apart from being administered as components of dietary supplements, they are also perceived as the effective agents in treatment of migraine, alcoholism, asthma, heart diseases, arrhythmias, renal calcium stones, premenstrual tension syndrome etc. Magnesium preparations have an essential place in homeopathy as a remedy for a range of mental health problems. Mechanisms of antidepressant action of magnesium are not fully understood yet. Most probably, magnesium influences several systems associated with development of depression. The first information on the beneficial effect of magnesium sulfate given hypodermically to patients with agitated depression was published almost 100 years ago. Numerous pre-clinical and clinical studies confirmed the initial observations as well as demonstrated the beneficial safety profile of magnesium supplementation. Thus, magnesium preparations seem to be a valuable addition to the pharmacological armamentarium for management of depression. PMID:23950577

  18. Magnesium in disease

    PubMed Central

    Wanner, Christoph

    2012-01-01

    Although the following text will focus on magnesium in disease, its role in healthy subjects during physical exercise when used as a supplement to enhance performance is also noteworthy. Low serum magnesium levels are associated with metabolic syndrome, Type 2 diabetes mellitus (T2DM) and hypertension; consequently, some individuals benefit from magnesium supplementation: increasing magnesium consumption appears to prevent high blood pressure, and higher serum magnesium levels are associated with a lower risk of developing a metabolic syndrome. There are, however, conflicting study results regarding magnesium administration with myocardial infarction with and without reperfusion therapy. There was a long controversy as to whether or not magnesium should be given as a first-line medication. As the most recent trials have not shown any difference in outcome, intravenous magnesium cannot be recommended in patients with myocardial infarction today. However, magnesium has its indication in patients with torsade de pointes and has been given successfully to patients with digoxin-induced arrhythmia or life-threatening ventricular arrhythmias. Magnesium sulphate as an intravenous infusion also has an important established therapeutic role in pregnant women with pre-eclampsia as it decreases the risk of eclamptic seizures by half compared with placebo. PMID:26069818

  19. In vivo decomposition study of coated magnesium alloys

    NASA Astrophysics Data System (ADS)

    White, Desiree; Piersma, Tyler; Lecronier, David; Cheng, Xingguo; Rabago-Smith, Montserrat

    2010-04-01

    In the last decade, magnesium has resurged as an important biomaterial. Its mechanical properties are very similar to natural bone, and it degrades in vivo to non toxic substances. Unfortunately, corrosion of pure magnesium in vivo is rapid, thus coated alloys that decrease its corrosion could be used as implants in orthopedics. This presentation will describe the degradation results in cell cultures and in rats.

  20. In vitro decomposition study of coated magnesium alloys

    NASA Astrophysics Data System (ADS)

    Piersma, Tyler; White, Desiree; Cheng, Xinggou; Rabago-Smith, Montserrat; Lecronier, David

    2010-04-01

    In the last decade, magnesium has resurged as an important biomaterial. It's mechanical properties are very similar to natural bone, and it degrades in vivo to non toxic substances. Unfortunately, corrosion of pure magnesium in vivo is rapid, thus coated alloys that decrease it's corrosion could be used as implants in orthopedics. This presentation will describe the degradation results in a simulated body fluid (SBF).

  1. Magnesium in pregnancy.

    PubMed

    Dalton, Lynne M; Ní Fhloinn, Deirdre M; Gaydadzhieva, Gergana T; Mazurkiewicz, Ola M; Leeson, Heather; Wright, Ciara P

    2016-09-01

    Magnesium deficiency is prevalent in women of childbearing age in both developing and developed countries. The need for magnesium increases during pregnancy, and the majority of pregnant women likely do not meet this increased need. Magnesium deficiency or insufficiency during pregnancy may pose a health risk for both the mother and the newborn, with implications that may extend into adulthood of the offspring. The measurement of serum magnesium is the most widely used method for determining magnesium levels, but it has significant limitations that have both hindered the assessment of deficiency and affected the reliability of studies in pregnant women. Thus far, limited studies have suggested links between magnesium inadequacy and certain conditions in pregnancy associated with high mortality and morbidity, such as gestational diabetes, preterm labor, preeclampsia, and small for gestational age or intrauterine growth restriction. This review provides recommendations for further study and improved testing using measurement of red cell magnesium. Pregnant women should be counseled to increase their intake of magnesium-rich foods such as nuts, seeds, beans, and leafy greens and/or to supplement with magnesium at a safe level. PMID:27445320

  2. The anticarcinogenic effect of magnesium.

    PubMed

    Blondell, J M

    1980-08-01

    Evidence is reviewed supporting a hypothesis of an anticarcinogenic effect of magnesium. Animal studies reported increased cancer in rodents maintained on magnesium deficient diets and a preventive effect for rodents fed excess levels of magnesium. Epidemiologic evidence is presented that magnesium levels in water, food, and air are inversely related to cancer mortality. Magnesium may also have a role in the reduced cancer mortality experienced by people living at high altitudes. Two biologically plausible mechanisms are considered by which magnesium could prevent carcinogenesis. Intracellular magnesium may enhance the fidelity of DNA replication or magnesium on the cell membrane may prevent changes which trigger the carcinogenic process. PMID:7442590

  3. 75 FR 56989 - Magnesium Metal From the Russian Federation: Final Results of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... Duty Administrative Review, 75 FR 26922 (May 13, 2010) (Preliminary Results). We invited interested... Magnesium in Granular Form From the People's Republic of China, 66 FR 49345 (September 27, 2001), Notice of Final Determination of Sales at Less Than Fair Value: Pure Magnesium From Israel, 66 FR 49349...

  4. Borosilicate glass alteration driven by magnesium carbonates

    NASA Astrophysics Data System (ADS)

    Debure, M.; Frugier, P.; De Windt, L.; Gin, S.

    2012-01-01

    The alteration of simplified synthetic glass, representative of the French reference nuclear glass R7T7, in presence of hydromagnesite has been experimentally investigated and modeled. Magnesium in solution is known to potentially enhance glass alteration; nuclear glass clayed host rocks contain magnesium and can dissolve to maintain the concentration of magnesium in solution. For modeling purposes, it was suitable to study a simple system. Hydromagnesite was therefore chosen as a simple model mineral in order to check the influence of an Mg-rich mineral on glass alteration. Since the models use thermodynamic and kinetic parameters measured in pure water and pH-buffered solutions, changing the solution composition or adding minerals is a key step towards the validation of the modeling assumptions before using the model for predictive purposes. Experiments revealed that glass alteration is enhanced in presence of hydromagnesite. Modeling was performed using the GRAAL model implemented within the CHESS/HYTEC reactive transport code. Modeling proved useful both for explaining the mechanisms involved and quantifying the impact on glass alteration: Mg coming from hydromagnesite dissolution reacts with Si provided by the glass in order to form magnesium silicates. This reaction decreases the pH down to neutral conditions where magnesium silicates are more soluble than at the natural alkali pH imposed by glass or hydromagnesite dissolution. The driving force of the magnesium silicate precipitation is eventually the interdiffusion of alkali within the altered amorphous glass layer as this mechanism consumes protons. The model's ability to describe the concentrations of elements in solution and formed solids whatever the glass/hydromagnesite ratio strongly supports the basic modeling hypothesis.

  5. Magnesium deficiency: what's our status?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Low magnesium intake has been implicated in a broad range of cardiometabolic conditions, including diabetes, hypertension, and cardiovascular disease. Dietary magnesium and total body magnesium status have a widely-used but imperfect biomarker in serum magnesium. Despite serum magnesium’s limitation...

  6. Method for production of magnesium

    DOEpatents

    Diaz, Alexander F.; Howard, Jack B.; Modestino, Anthony J.; Peters, William A.

    1998-01-01

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400.degree. C. or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products.

  7. Method for production of magnesium

    DOEpatents

    Diaz, A.F.; Howard, J.B.; Modestino, A.J.; Peters, W.A.

    1998-07-21

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400 C or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products. 12 figs.

  8. Magnesium battery disposal characteristics

    NASA Astrophysics Data System (ADS)

    Soffer, Louis; Atwater, Terrill

    1994-12-01

    This study assesses the disposal characteristics of U.S. Army procured military magnesium batteries under current Resource Conservation and Recovery Act (RCRA) hazardous waste identification regulations administered by the U.S. Environmental Protection Agency. Magnesium batteries were tested at 100, 50, 10 and 0 percent remaining state of charge. Present findings indicate that magnesium batteries with less than 50 percent remaining charge do not exceed the federal regulatory limit of 5.0 mg/L for chromium. All other RCRA contaminates were below regulatory limits at all levels of remaining charge. Assay methods, findings, disposal requirements and design implications are discussed.

  9. Twisted partially pure spinors

    NASA Astrophysics Data System (ADS)

    Herrera, Rafael; Tellez, Ivan

    2016-08-01

    Motivated by the relationship between orthogonal complex structures and pure spinors, we define twisted partially pure spinors in order to characterize spinorially subspaces of Euclidean space endowed with a complex structure.

  10. Magnesium blood test

    MedlinePlus

    Magnesium - blood ... A blood sample is needed. ... When the needle is inserted to draw blood, some people feel slight pain. Others feel a prick or stinging. Afterward, there may be some throbbing or a slight bruise. This soon ...

  11. Magnesium for automotive applications

    SciTech Connect

    VanFleteren, R.

    1996-05-01

    Die cast magnesium parts are rapidly replacing steel and aluminum structural components in automotive applications, as design engineers seek to reduce assembly costs, raise fuel efficiency, and improve safety. Dozens of automotive components are now die cast from magnesium alloys, including seat stanchions, valve covers, steering wheels, and a variety of steering column components. Because of their excellent castability, complex magnesium die castings can sometimes consolidate several components and eliminate assembly steps. Highly ductile magnesium alloys such as AM60B (6% aluminum) and AM50A (5% aluminum) are important in helping to meet automotive industry crash-energy requirements for car seating and steering components. AZ91D (9% aluminum, 1% zinc) alloys are making removable rear seats in new minivans much easier to handle.

  12. Low magnesium level

    MedlinePlus

    ... in the body that convert or use energy ( metabolism ). When the level of magnesium in the body ... Walls RM, et al., eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier ...

  13. Rechargeable Magnesium Power Cells

    NASA Technical Reports Server (NTRS)

    Koch, Victor R.; Nanjundiah, Chenniah; Orsini, Michael

    1995-01-01

    Rechargeable power cells based on magnesium anodes developed as safer alternatives to high-energy-density cells like those based on lithium and sodium anodes. At cost of some reduction in energy density, magnesium-based cells safer because less susceptible to catastrophic meltdown followed by flames and venting of toxic fumes. Other advantages include ease of handling, machining, and disposal, and relatively low cost.

  14. Interstellar magnesium abundances

    NASA Technical Reports Server (NTRS)

    Murray, M. J.; Dufton, P. L.; Hibbert, A.; York, D. G.

    1984-01-01

    An improved evaluation of the Mg II 1240 A doublet oscillator strength is used in conjunction with recently published Copernicus observations to derive accurate Mg II column densities toward 74 stars. These imply an average of 40 percent of interstellar magnesium is in the gaseous phase. Magnesium depletion is examined as a function of various interstellar extinction and density parameters, and the results are briefly discussed in terms of current depletion theories.

  15. Magnesium for Future Autos

    SciTech Connect

    Nyberg, Eric A.; Luo, Alan A.; Sadayappan, Kumar; Shi, Wenfang

    2008-10-01

    In the quest for better fuel economy and improved environmental performance, magnesium may well become a metal of choice for constructing lighter, more efficient vehicles. Magnesium is the lightest structural metal, yet it has a high strength-to-weight ratio makes it comparable to steel in many applications. The world’s automakers already use magnesium for individual components. But new alloys and processing methods are needed before the metal can become economically and technologically feasible as a major automotive structural material. This article will explore the formation, challenges and initial results of an international collaboration—the Magnesium Front End Research and Development (MFERD) project—that is leveraging the expertise and resources of Canada, China and the United States to advance the creation of magnesium-intensive vehicles. The MFERD project aims to develop the enabling technologies and knowledge base that will lead to a vehicles that are 50-60 percent lighter, equally affordable, more recyclable and of equal or better quality when compared to today’s vehicles. Databases of information also will be captured in models to enable further alloy and manufacturing process optimization. Finally, a life-cycle analysis of the magnesium used will be conducted.

  16. Novel process for recycling magnesium alloy employing refining and solid oxide membrane electrolysis

    NASA Astrophysics Data System (ADS)

    Guan, Xiaofei

    Magnesium is the least dense engineering metal, with an excellent stiffness-to-weight ratio. Magnesium recycling is important for both economic and environmental reasons. This project demonstrates feasibility of a new environmentally friendly process for recycling partially oxidized magnesium scrap to produce very pure magnesium at low cost. It combines refining and solid oxide membrane (SOM) based oxide electrolysis in the same reactor. Magnesium and its oxide are dissolved in a molten flux. This is followed by argon-assisted evaporation of dissolved magnesium, which is subsequently condensed in a separate condenser. The molten flux acts as a selective medium for magnesium dissolution, but not aluminum or iron, and therefore the magnesium collected has high purity. Potentiodynamic scans are performed to monitor the magnesium content change in the scrap as well as in solution in the flux. The SOM electrolysis is employed in the refining system to enable electrolysis of the magnesium oxide dissolved in the flux from the partially oxidized scrap. During the SOM electrolysis, oxygen anions are transported out of the flux through a yttria stabilized zirconia membrane to a liquid silver anode where they are oxidized. Simultaneously, magnesium cations are transported through the flux to a steel cathode where they are reduced. The combination of refining and SOM electrolysis yields close to 100% removal of magnesium metal from partially oxidized magnesium scrap. The magnesium recovered has a purity of 99.6w%. To produce pure oxygen it is critical to develop an inert anode current collector for use with the non-consumable liquid silver anode. In this work, an innovative inert anode current collector is successfully developed and used in SOM electrolysis experiments. The current collector employs a sintered strontium-doped lanthanum manganite (La0.8Sr0.2MnO 3-delta or LSM) bar, an Inconel alloy 601 rod, and a liquid silver contact in between. SOM electrolysis experiments

  17. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium phosphate. 184.1434 Section 184.1434 Food... Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate, dibasic...

  18. Absorption of magnesium from orally administered magnesium sulfate in man.

    PubMed

    Morris, M E; LeRoy, S; Sutton, S C

    1987-01-01

    The use of magnesium sulfate (Epsom salt) as a cathartic in patients with impaired renal function can lead to severe toxicity due to hypermagnesemia. Although toxicity is uncommon in healthy subjects, little is known concerning the extent of absorption of magnesium after a cathartic dose of magnesium sulfate. The bioavailability of magnesium following a large oral dose of magnesium sulfate in normal volunteers was examined in the present investigation. Baseline 24-hour urinary excretion rates of magnesium and creatinine were determined over 3 consecutive days in 6 healthy men. The oral administration of 13.9 g (56.5 mmoles) magnesium sulfate U.S.P., in 4 equal hourly increments, resulted in the urinary excretion (corrected for baseline excretion rate) of 4.0 +/- 2.9% (mean +/- SD) of the dose of magnesium during the first 24 hours and 6.9 +/- 7.0% of the dose during a 72-hour interval. Magnesium sulfate administration had no effect on the 24-hour urinary excretion rate of creatinine. The baseline excretion rate of magnesium was significantly correlated with that of creatinine (r = 0.875) and inorganic sulfate (r = 0.921). All of the subjects experienced mild or moderate diarrhea. Therefore, magnesium is absorbed to a limited and variable extent in healthy adults following a cathartic dose of magnesium sulfate. PMID:3430654

  19. Calcium carbonate with magnesium overdose

    MedlinePlus

    The combination of calcium carbonate and magnesium is commonly found in antacids. These medicines provide heartburn relief. Calcium carbonate with magnesium overdose occurs when someone takes more than the ...

  20. Aluminum Hydroxide and Magnesium Hydroxide

    MedlinePlus

    Aluminum Hydroxide, Magnesium Hydroxide are antacids used together to relieve heartburn, acid indigestion, and upset stomach. They ... They combine with stomach acid and neutralize it. Aluminum Hydroxide, Magnesium Hydroxide are available without a prescription. ...

  1. 7 CFR 916.16 - Pure grower or pure producer.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Pure grower or pure producer. 916.16 Section 916.16... Order Regulating Handling Definitions § 916.16 Pure grower or pure producer. (a) Pure grower means any...); or (2) Who produces and handles his or her own product; Provided, That a pure grower can pack...

  2. 7 CFR 916.16 - Pure grower or pure producer.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Pure grower or pure producer. 916.16 Section 916.16... Order Regulating Handling Definitions § 916.16 Pure grower or pure producer. (a) Pure grower means any...); or (2) Who produces and handles his or her own product; Provided, That a pure grower can pack...

  3. X-ray photoelectron spectroscopy (XPS) investigation of the surface film on magnesium powders.

    PubMed

    Burke, Paul J; Bayindir, Zeynel; Kipouros, Georges J

    2012-05-01

    Magnesium (Mg) and its alloys are attractive for use in automotive and aerospace applications because of their low density and good mechanical properties. However, difficulty in forming magnesium and the limited number of available commercial alloys limit their use. Powder metallurgy may be a suitable solution for forming near-net-shape parts. However, sintering pure magnesium presents difficulties due to surface film that forms on the magnesium powder particles. The present work investigates the composition of the surface film that forms on the surface of pure magnesium powders exposed to atmospheric conditions and on pure magnesium powders after compaction under uniaxial pressing at a pressure of 500 MPa and sintering under argon at 600 °C for 40 minutes. Initially, focused ion beam microscopy was utilized to determine the thickness of the surface layer of the magnesium powder and found it to be ~10 nm. The X-ray photoelectron analysis of the green magnesium sample prior to sintering confirmed the presence of MgO, MgCO(3)·3H(2)O, and Mg(OH)(2) in the surface layer of the powder with a core of pure magnesium. The outer portion of the surface layer was found to contain MgCO(3)·3H(2)O and Mg(OH)(2), while the inner portion of the layer is primarily MgO. After sintering, the MgCO(3)·3H(2)O was found to be almost completely absent, and the amount of Mg(OH)(2) was also decreased significantly. This is postulated to occur by decomposition of the compounds to MgO and gases during the high temperature of sintering. An increase in the MgO content after sintering supports this theory. PMID:22524956

  4. Magnesium Research and Technology Development

    SciTech Connect

    Nyberg, Eric A.; Joost, William; Smith, Mark T.

    2009-12-30

    The Magnesium Research and Technical Development (MR&TD) project supports efforts to increase using magnesium in automotive applications, including improving technology, lowering costs and increasing the knowledge needed to enable alloy and manufacturing process optimization. MR&TD supports the U.S. Department of Energy (DOE)/United States Automotive Materials Partnership (USAMP) Magnesium Front End Research and Development (MFERD) project in collaboration with China and Canada. The MR&TD projects also maintains the magnesium bibliographic database at magnesium.pnl.gov.

  5. Purely lytic osteosarcoma

    SciTech Connect

    De Santos, L.A.; Eideken, B.

    1982-11-01

    The radiographic features of 42 purely lytic osteosarcomas are presented. Purely lytic osteosarcoma is identified as a lytic lesion of bone with no demonstrable osteoid matrix by conventional radiographic modalities. Purely lytic osteosarcoma represented 13.7% of a group of 305 osteosarcomas. The most common presentation was that of a lytic illdefined lesion with a moderate to large extraosseous mass component. Nine lesions presented with benign radiographic features. The differential diagnosis is outlined. The need for awareness of this type of presentation of osteosarcoma is stressed.

  6. Science: Pure or Applied?

    ERIC Educational Resources Information Center

    Evans, Peter

    1980-01-01

    Through a description of some of the activities which take place in his science classroom, the author makes a strong case for the inclusion of technology, or applied science, rather than pure science in the primary curriculum. (KC)

  7. Pure-quartic solitons.

    PubMed

    Blanco-Redondo, Andrea; de Sterke, C Martijn; Martijn, de Sterke C; Sipe, J E; Krauss, Thomas F; Eggleton, Benjamin J; Husko, Chad

    2016-01-01

    Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we experimentally demonstrate a class of bright soliton arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. We derive the approximate shape of the fundamental pure-quartic soliton and discover that is surprisingly Gaussian, exhibiting excellent agreement with our experimental observations. Our discovery, enabled by precise dispersion engineering, could find applications in communications, frequency combs and ultrafast lasers. PMID:26822758

  8. Pure-quartic solitons

    PubMed Central

    Blanco-Redondo, Andrea; Martijn, de Sterke C.; Sipe, J.E.; Krauss, Thomas F.; Eggleton, Benjamin J.; Husko, Chad

    2016-01-01

    Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we experimentally demonstrate a class of bright soliton arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. We derive the approximate shape of the fundamental pure-quartic soliton and discover that is surprisingly Gaussian, exhibiting excellent agreement with our experimental observations. Our discovery, enabled by precise dispersion engineering, could find applications in communications, frequency combs and ultrafast lasers. PMID:26822758

  9. Pure-quartic solitons

    NASA Astrophysics Data System (ADS)

    Blanco-Redondo, Andrea; Martijn, De Sterke C.; Sipe, J. E.; Krauss, Thomas F.; Eggleton, Benjamin J.; Husko, Chad

    2016-01-01

    Temporal optical solitons have been the subject of intense research due to their intriguing physics and applications in ultrafast optics and supercontinuum generation. Conventional bright optical solitons result from the interaction of anomalous group-velocity dispersion and self-phase modulation. Here we experimentally demonstrate a class of bright soliton arising purely from the interaction of negative fourth-order dispersion and self-phase modulation, which can occur even for normal group-velocity dispersion. We provide experimental and numerical evidence of shape-preserving propagation and flat temporal phase for the fundamental pure-quartic soliton and periodically modulated propagation for the higher-order pure-quartic solitons. We derive the approximate shape of the fundamental pure-quartic soliton and discover that is surprisingly Gaussian, exhibiting excellent agreement with our experimental observations. Our discovery, enabled by precise dispersion engineering, could find applications in communications, frequency combs and ultrafast lasers.

  10. Geomorphology: Pure and applied

    SciTech Connect

    Hart, M.G.

    1986-01-01

    The book summarizes the history of intellectual debate in geomorphology and describes modern developments both ''pure'' and ''applied.'' The history begins well before W.M. Davis and follows through to such debates as those concerned with the Pleistocene. Modern developments in pure geomorphology are cast in terms of chapters on form, process, materials, and methods analysis. The applied chapters concentrate on environmental hazards and resources, and their management.

  11. Grosnaja ABCs: Magnesium isotope compositions

    NASA Technical Reports Server (NTRS)

    Goswami, J. N.; Srinivasan, G.; Ulyanov, A. A.

    1993-01-01

    Three CAI's from the Grosnaja CV3 chondrite were analyzed for their magnesium isotopic compositions by the ion microprobe. The selected CAI's represent three distinct types: GR4(compact Type A), GR7(Type B) and GR2(Type C). Petrographic studies indicate that all three Grosnaja inclusions were subjected to secondary alterations. The Type A CAI GR4 is primarily composed of melilite with spinel and pyroxene occurring as minor phases. The rim of the inclusion does not exhibit distinct layered structure and secondary alteration products (garnet, Fe-rich olivine and Na-rich plagioclase) are present in some localized areas near the rim region. The average major element compositions of different mineral phases in GR4 are given. Preliminary REE data suggest a depletion of HREE relative to LREE by about a factor of 3 without any clear indication of interelement fractionation. The CAI GR7 has textural and minerological characteristics similar to Type B inclusions. The REE data show a pattern that is similar to Group 6 with enrichment in Eu and Yb. In addition, a depletion of HREE compared to LREE is also evident in this object. Melilite composition shows a broad range of akermanite content (Ak(sub 15-55)). Detailed petrographic study is in progress. GR2 is a anorthite-rich Type C inclusion with large plagioclase laths intergrown with Ti-rich pyroxene. The average plagioclase composition is close to pure anorthite (An99).

  12. Production, structure, texture, and mechanical properties of severely deformed magnesium

    NASA Astrophysics Data System (ADS)

    Volkov, A. Yu.; Antonova, O. V.; Kamenetskii, B. I.; Klyukin, I. V.; Komkova, D. A.; Antonov, B. D.

    2016-05-01

    Methods of the severe plastic deformation (SPD) of pure magnesium at room temperature, namely, transverse extrusion and hydroextrusion in a self-destroyed shell, have been developed. The maximum true strain of the samples after the hydroextrusion was e ~ 3.2; in the course of transverse extrusion and subsequent cold rolling, a true strain of e ~ 6.0 was achieved. The structure and mechanical properties of the magnesium samples have been studied in different structural states. It has been shown that the SPD led to a decrease in the grain size d to ~2 μm; the relative elongation at fracture δ increased to ~20%. No active twinning has been revealed. The reasons for the high plasticity of magnesium after SPD according to the deformation modes suggested are discussed from the viewpoint of the hierarchy of the observed structural states.

  13. Mechanisms and regulation of renal magnesium transport.

    PubMed

    Houillier, Pascal

    2014-01-01

    Magnesium's most important role is in the release of chemical energy. Although most magnesium is stored outside of the extracellular fluid compartment, the regulated value is blood magnesium concentration. Cellular magnesium and bone magnesium do not play a major role in the defense of blood magnesium concentration; the major role is played by the kidney, where the renal tubule matches the urinary magnesium excretion and the net entry of magnesium into the extracellular fluid. In the kidney, magnesium is reabsorbed in the proximal tubule, the thick ascending limb of the loop of Henle, and the distal convoluted tubule. Magnesium absorption is mainly paracellular in the proximal tubule and in the thick ascending limb of the loop of Henle, whereas it is transcellular in the distal convoluted tubule. Several hormones and extracellular magnesium itself alter the distal tubular handling of magnesium, but the hormone(s) regulating extracellular magnesium concentration remains unknown. PMID:24512082

  14. Nondestructive spot test method for magnesium and magnesium alloys

    NASA Technical Reports Server (NTRS)

    Wilson, M. L. (Inventor)

    1973-01-01

    A method for spot test identification of magnesium and various magnesium alloys commonly used in aerospace applications is described. The spot test identification involves color codes obtained when several drops of 3 M hydrochloric acid are placed on the surface to be tested. After approximately thirty seconds, two drops of this reacted acid is transferred to each of two depressions in a spot plate for additions of other chemicals with subsequent color changes indicating magnesium or its alloy.

  15. Highly Soluble Alkoxide Magnesium Salts for Rechargeable Magnesium Batteries

    SciTech Connect

    Liao, Chen; Guo, Bingkun; Jiang, Deen; Custelcean, Radu; Mahurin, Shannon Mark; Sun, Xiao-Guang; Dai, Sheng

    2014-01-01

    A unique class of air-stable and non-pyrophoric magnesium electrolytes has been developed based on alkoxide magnesium compounds. The crystals obtained from this class of electrolytes exhibit a unique structure of tri-magnesium cluster, [Mg3Cl3(OR)2(THF)6]+ [(THF)MgCl3] . High reversible capacities and good rate capabilities were obtained in Mg-Mo6S8 batteries using these new electrolytes at both 20 and 50 oC.

  16. Magnesium fluoride recovery method

    DOEpatents

    Gay, Richard L.; McKenzie, Donald E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is contacted with an acid under certain prescribed conditions to produce a liquid product and a particulate solid product. The particulate solid product is separated from the liquid and treated at least two more times with acid to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 pCi/gm. In accordance with a particularly preferred embodiment of the invention a catalyst and an oxidizing agent are used during the acid treatment and preferably the acid is sulfuric acid having a strength of about 1.0 Normal.

  17. CELLULAR MAGNESIUM HOMEOSTASIS

    PubMed Central

    Romani, Andrea M.P.

    2011-01-01

    Magnesium, the second most abundant cellular cation after potassium, is essential to regulate numerous cellular functions and enzymes, including ion channels, metabolic cycles, and signaling pathways, as attested by more than 1000 entries in the literature. Despite significant recent progress, however, our understanding of how cells regulate Mg2+ homeostasis and transport still remains incomplete. For example, the occurrence of major fluxes of Mg2+ in either direction across the plasma membrane of mammalian cells following metabolic or hormonal stimuli has been extensively documented. Yet, the mechanisms ultimately responsible for magnesium extrusion across the cell membrane have not been cloned. Even less is known about the regulation in cellular organelles. The present review is aimed at providing the reader with a comprehensive and up-to-date understanding of the mechanisms enacted by eukaryotic cells to regulate cellular Mg2+ homeostasis and how these mechanisms are altered under specific pathological conditions. PMID:21640700

  18. Constraining magnesium cycling in marine sediments using magnesium isotopes

    NASA Astrophysics Data System (ADS)

    Higgins, J. A.; Schrag, D. P.

    2010-09-01

    Magnesium concentrations in deep-sea sediment pore-fluids typically decrease down core due to net precipitation of dolomite or clay minerals in the sediments or underlying crust. To better characterize and differentiate these processes, we have measured magnesium isotopes in pore-fluids and sediment samples from Ocean Drilling Program sites (1082, 1086, 1012, 984, 1219, and 925) that span a range of oceanographic settings. At all sites, magnesium concentrations decrease with depth. At sites where diagenetic reactions are dominated by the respiration of organic carbon, pore-fluid δ 26Mg values increase with depth by as much as 2‰. Because carbonates preferentially incorporate 24Mg (low δ 26Mg), the increase in pore-fluid δ 26Mg values at these sites is consistent with the removal of magnesium in Mg-carbonate (dolomite). In contrast, at sites where the respiration of organic carbon is not important and/or weatherable minerals are abundant, pore-fluid δ 26Mg values decrease with depth by up to 2‰. The decline in pore-fluid δ 26Mg at these sites is consistent with a magnesium sink that is isotopically enriched relative to the pore-fluid. The identity of this enriched magnesium sink is likely clay minerals. Using a simple 1D diffusion-advection-reaction model of pore-fluid magnesium, we estimate rates of net magnesium uptake/removal and associated net magnesium isotope fractionation factors for sources and sinks at all sites. Independent estimates of magnesium isotope fractionation during dolomite precipitation from measured δ 26Mg values of dolomite samples from sites 1082 and 1012 are very similar to modeled net fractionation factors at these sites, suggesting that local exchange of magnesium between sediment and pore-fluid at these sites can be neglected. Our results indicate that the magnesium incorporated in dolomite is 2.0-2.7‰ depleted in δ 26Mg relative to the precipitating fluid. Assuming local exchange of magnesium is minor at the rest of the

  19. Improved corrosion resistance on biodegradable magnesium by zinc and aluminum ion implantation

    NASA Astrophysics Data System (ADS)

    Xu, Ruizhen; Yang, Xiongbo; Suen, Kai Wong; Wu, Guosong; Li, Penghui; Chu, Paul K.

    2012-12-01

    Magnesium and its alloys have promising applications as biodegradable materials, and plasma ion implantation can enhance the corrosion resistance by modifying the surface composition. In this study, suitable amounts of zinc and aluminum are plasma-implanted into pure magnesium. The surface composition, phases, and chemical states are determined, and electrochemical tests and electrochemical impedance spectroscopy (EIS) are conducted to investigate the surface corrosion behavior and elucidate the mechanism. The corrosion resistance enhancement after ion implantation is believed to stem from the more compact oxide film composed of magnesium oxide and aluminum oxide as well as the appearance of the β-Mg17Al12 phase.

  20. Keratinocyte substrate adhesion is magnesium-dependent and calcium-independent.

    PubMed

    Fritsch, P; Tappeiner, G; Huspek, G

    1979-10-01

    Primary cell cultures were prepared from guinea pig epidermis and six days old mice kidneys and hearts. Along with subcultures of Hep cells, plating experiments were performed using media devoid of bivalent cations containing dialzyed fetal calf serum. Upon stepwise supplementation with either calcium ++ or magnesium ++, keratinocytes displayed a unique dependency on magnesium ++ for cell attachment, whereas all other cell types could make use of either of these ions. Melanocytes, being a minority component of the epidermal cell population, do not conform to the predilection of keratinocytes for magnesium ++. Epidermal cell cultures prepared in media containing only calcium ++, therefore, result in pure melanocyte cultures. PMID:535038

  1. Pure uterine lipoma.

    PubMed

    Erdem, Gulnur; Celik, Onder; Karakas, Hakki Muammer; Alkan, Alpay; Hascalik, Seyma

    2007-10-01

    Lipomatous tumors of the uterus are unusual, benign neoplasms seen in postmenopausal women. Although many of the mixed-type cases such as lipoleiomyoma and fibrolipoma have been reported, pure uterine lipomas are extremely rare. In the literature, a few cases with pure uterine lipoma have been reported. We first present the advanced magnetic resonance findings of pure uterine lipoma, followed by those of ultrasonography (US) and computed tomography (CT). We markedly detected lipid peaks on the magnetic resonance spectroscopy (MRS) and the apparent diffusion coefficient value to be 0.00 due to chemical-shift effects with diffusion-weighted imaging (DWI). Although pelvic lipomatous tumors can be diagnosed with US and CT, in some cases, further workup may be required to localize the lesion. MRI may yield more valuable data for differential diagnosis. MRS and DWI findings provide additional clues on the nature of the lesion. PMID:17905250

  2. Mineral of the month: magnesium

    USGS Publications Warehouse

    Kramer, Deborah A.

    2005-01-01

    Magnesium, often confused with last month’s mineral of the month manganese, is valued primarily because of its light weight and high strength-to-weight ratio. Magnesium is the eighth most abundant element and constitutes about 2 percent of the Earth’s crust. It is the third most plentiful element dissolved in seawater, with a concentration averaging 0.13 percent. Magnesium is found in over 60 minerals, and also is recovered from seawater, wells, and lake brines and bitterns.

  3. Low brain magnesium in migraine

    SciTech Connect

    Ramadan, N.M.; Halvorson, H.; Vande-Linde, A.; Levine, S.R.; Helpern, J.A.; Welch, K.M.

    1989-10-01

    Brain magnesium was measured in migraine patients and control subjects using in vivo 31-Phosphorus Nuclear Magnetic Resonance Spectroscopy. pMg and pH were calculated from the chemical shifts between Pi, PCr and ATP signals. Magnesium levels were low during a migraine attack without changes in pH. We hypothesize that low brain magnesium is an important factor in the mechanism of the migraine attack.

  4. Magnesium metabolism: a brief review.

    PubMed Central

    Paymaster, N. J.

    1976-01-01

    The important role played by the magnesium ion in the body is not generally recognized. The action of numerous enzyme systems critical to cellular metabolism is regulated by it and it contributes importantly to macromolecular structure. Magnesium defiency occurs more often than is generally suspected; magnesium excess, though uncommon, is of special interest to the anaesthetist because it produces a curare-like effect on neuromuscular transmission. It is hoped that this brief review of magnesium metabolism will draw attention to its importance and relevance in everyday practice. PMID:942168

  5. Production of pure metals

    NASA Technical Reports Server (NTRS)

    Philipp, W. H.; Marsik, S. J.; May, C. E. (Inventor)

    1974-01-01

    A process for depositing elements by irradiating liquids is reported. Ultra pure elements are precipitated from aqueous solutions or suspensions of compounds. A solution of a salt of a metal to be prepared is irradiated, and the insoluble reaction product settles out. Some chemical compounds may also be prepared in this manner.

  6. Dahlbeck and Pure Ontology

    ERIC Educational Resources Information Center

    Mackenzie, Jim

    2016-01-01

    This article responds to Johan Dahlbeck's "Towards a pure ontology: Children's bodies and morality" ["Educational Philosophy and Theory," vol. 46 (1), 2014, pp. 8-23 (EJ1026561)]. His arguments from Nietzsche and Spinoza do not carry the weight he supposes, and the conclusions he draws from them about pedagogy would be…

  7. Emerging Environment Friendly, Magnesium-Based Composite Technology for Present and Future Generations

    NASA Astrophysics Data System (ADS)

    Meenashisundaram, G. K.; Gupta, M.

    2016-02-01

    Magnesium is the lightest and one of the most abundant elements in the universe. In addition, magnesium possesses several other benefits like excellent castability, high damping capacity, good electromagnetic shielding, and excellent machinability. These inherent characteristics of magnesium-based materials ensure fuel economy, reduced CO2 emissions, and a greener earth. Furthermore, as magnesium-based materials are almost 35% lighter than aluminum-based materials, a tremendous surge in magnesium demand over the next 5 years is expected. One way in which the engineering capabilities of magnesium and its alloys can further be enhanced is to use composite technology. The addition of nanoparticles, for example, leads to enhanced tensile, compressive, fatigue, creep, dynamic, tribological, and corrosion properties. In addition, amorphous and hollow reinforcements can also enhance targeted mechanical/physical properties. Accordingly, the present study will highlight the key capabilities of magnesium-based composite technology. An attempt is made to summarize on the size effects and type of reinforcements such as metallic or ceramic nanoparticles, and amorphous and hollow reinforcements on the microstructural and mechanical properties of monolithic pure magnesium.

  8. Emerging Environment Friendly, Magnesium-Based Composite Technology for Present and Future Generations

    NASA Astrophysics Data System (ADS)

    Meenashisundaram, G. K.; Gupta, M.

    2016-07-01

    Magnesium is the lightest and one of the most abundant elements in the universe. In addition, magnesium possesses several other benefits like excellent castability, high damping capacity, good electromagnetic shielding, and excellent machinability. These inherent characteristics of magnesium-based materials ensure fuel economy, reduced CO2 emissions, and a greener earth. Furthermore, as magnesium-based materials are almost 35% lighter than aluminum-based materials, a tremendous surge in magnesium demand over the next 5 years is expected. One way in which the engineering capabilities of magnesium and its alloys can further be enhanced is to use composite technology. The addition of nanoparticles, for example, leads to enhanced tensile, compressive, fatigue, creep, dynamic, tribological, and corrosion properties. In addition, amorphous and hollow reinforcements can also enhance targeted mechanical/physical properties. Accordingly, the present study will highlight the key capabilities of magnesium-based composite technology. An attempt is made to summarize on the size effects and type of reinforcements such as metallic or ceramic nanoparticles, and amorphous and hollow reinforcements on the microstructural and mechanical properties of monolithic pure magnesium.

  9. In vitro degradation of pure Mg in response to glucose

    NASA Astrophysics Data System (ADS)

    Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

    2015-08-01

    Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results.

  10. In vitro degradation of pure Mg in response to glucose

    PubMed Central

    Zeng, Rong-Chang; Li, Xiao-Ting; Li, Shuo-Qi; Zhang, Fen; Han, En-Hou

    2015-01-01

    Magnesium and its alloys are promising biodegradable biomaterials but are still challenging to be used in person with high levels of blood glucose or diabetes. To date, the influence of glucose on magnesium degradation has not yet been elucidated, this issue requires more attention. Herein, we present pure Mg exhibiting different corrosion responses to saline and Hank’s solutions with different glucose contents, and the degradation mechanism of pure Mg in the saline solution with glucose in comparison with mannitol as a control. On one hand, the corrosion rate of pure Mg increases with the glucose concentration in saline solutions. Glucose rapidly transforms into gluconic acid, which attacks the oxides of the metal and decreases the pH of the solution; it also promotes the absorption of chloride ions on the Mg surface and consequently accelerates corrosion. On the other hand, better corrosion resistance is obtained with increasing glucose content in Hank’s solution due to the fact that glucose coordinates Ca2+ ions in Hank’s solution and thus improves the formation of Ca-P compounds on the pure Mg surface. This finding will open up new avenues for research on the biodegradation of bio-Mg materials in general, which could yield many new and interesting results. PMID:26264413

  11. Magnesium Hall Thruster

    NASA Technical Reports Server (NTRS)

    Szabo, James J.

    2015-01-01

    This Phase II project is developing a magnesium (Mg) Hall effect thruster system that would open the door for in situ resource utilization (ISRU)-based solar system exploration. Magnesium is light and easy to ionize. For a Mars- Earth transfer, the propellant mass savings with respect to a xenon Hall effect thruster (HET) system are enormous. Magnesium also can be combusted in a rocket with carbon dioxide (CO2) or water (H2O), enabling a multimode propulsion system with propellant sharing and ISRU. In the near term, CO2 and H2O would be collected in situ on Mars or the moon. In the far term, Mg itself would be collected from Martian and lunar regolith. In Phase I, an integrated, medium-power (1- to 3-kW) Mg HET system was developed and tested. Controlled, steady operation at constant voltage and power was demonstrated. Preliminary measurements indicate a specific impulse (Isp) greater than 4,000 s was achieved at a discharge potential of 400 V. The feasibility of delivering fluidized Mg powder to a medium- or high-power thruster also was demonstrated. Phase II of the project evaluated the performance of an integrated, highpower Mg Hall thruster system in a relevant space environment. Researchers improved the medium power thruster system and characterized it in detail. Researchers also designed and built a high-power (8- to 20-kW) Mg HET. A fluidized powder feed system supporting the high-power thruster was built and delivered to Busek Company, Inc.

  12. Magnesium in Prevention and Therapy

    PubMed Central

    Gröber, Uwe; Schmidt, Joachim; Kisters, Klaus

    2015-01-01

    Magnesium is the fourth most abundant mineral in the body. It has been recognized as a cofactor for more than 300 enzymatic reactions, where it is crucial for adenosine triphosphate (ATP) metabolism. Magnesium is required for DNA and RNA synthesis, reproduction, and protein synthesis. Moreover, magnesium is essential for the regulation of muscular contraction, blood pressure, insulin metabolism, cardiac excitability, vasomotor tone, nerve transmission and neuromuscular conduction. Imbalances in magnesium status—primarily hypomagnesemia as it is seen more common than hypermagnesemia—might result in unwanted neuromuscular, cardiac or nervous disorders. Based on magnesium’s many functions within the human body, it plays an important role in prevention and treatment of many diseases. Low levels of magnesium have been associated with a number of chronic diseases, such as Alzheimer’s disease, insulin resistance and type-2 diabetes mellitus, hypertension, cardiovascular disease (e.g., stroke), migraine headaches, and attention deficit hyperactivity disorder (ADHD). PMID:26404370

  13. Magnesium substitution in brushite cements.

    PubMed

    Alkhraisat, Mohammad Hamdan; Cabrejos-Azama, Jatsue; Rodríguez, Carmen Rueda; Jerez, Luis Blanco; Cabarcos, Enrique López

    2013-01-01

    The use of magnesium-doped ceramics has been described to modify brushite cements and improve their biological behavior. However, few studies have analyzed the efficiency of this approach to induce magnesium substitution in brushite crystals. Mg-doped ceramics composed of Mg-substituted β-TCP, stanfieldite and/or farringtonite were reacted with primary monocalcium phosphate (MCP) in the presence of water. The cement setting reaction has resulted in the formation of brushite and newberyite within the cement matrix. Interestingly, the combination of SAED and EDX analyses of single crystal has indicated the occurrence of magnesium substitution within brushite crystals. Moreover, the effect of magnesium ions on the structure, and mechanical and setting properties of the new cements was characterized as well as the release of Ca(2+) and Mg(2+) ions. Further research would enhance the efficiency of the system to incorporate larger amounts of magnesium ions within brushite crystals. PMID:25428098

  14. Pure Lovelock Kasner metrics

    NASA Astrophysics Data System (ADS)

    Camanho, Xián O.; Dadhich, Naresh; Molina, Alfred

    2015-09-01

    We study pure Lovelock vacuum and perfect fluid equations for Kasner-type metrics. These equations correspond to a single Nth order Lovelock term in the action in d=2N+1,2N+2 dimensions, and they capture the relevant gravitational dynamics when aproaching the big-bang singularity within the Lovelock family of theories. Pure Lovelock gravity also bears out the general feature that vacuum in the critical odd dimension, d=2N+1, is kinematic, i.e. we may define an analogue Lovelock-Riemann tensor that vanishes in vacuum for d=2N+1, yet the Riemann curvature is non-zero. We completely classify isotropic and vacuum Kasner metrics for this class of theories in several isotropy types. The different families can be characterized by means of certain higher order 4th rank tensors. We also analyze in detail the space of vacuum solutions for five- and six dimensional pure Gauss-Bonnet theory. It possesses an interesting and illuminating geometric structure and symmetries that carry over to the general case. We also comment on a closely related family of exponential solutions and on the possibility of solutions with complex Kasner exponents. We show that the latter imply the existence of closed timelike curves in the geometry.

  15. Magnesium Battery Electrolytes in Ionic Liquids

    NASA Astrophysics Data System (ADS)

    Watkins, Tylan Strike

    A lack of adequate energy storage technologies is arguably the greatest hindrance to a modern sustainable energy infrastructure. Chemical energy storage, in the form of batteries, is an obvious solution to the problem. Unfortunately, today's state of the art battery technologies fail to meet the desired metrics for full scale electric grid and/or electric vehicle role out. Considerable effort from scientists and engineers has gone into the pursuit of battery chemistries theoretically capable of far outperforming leading technologies like Li-ion cells. For instance, an anode of the relatively abundant and cheap metal, magnesium, would boost the specific energy by over 4.6 times that of the current Li-ion anode (LiC6). The work presented here explores the compatibility of magnesium electrolytes in TFSI---based ionic liquids with a Mg anode (TFSI = bis(trifluoromethylsulfonyl)imide). Correlations are made between the Mg2+ speciation conditions in bulk solutions (as determined via Raman spectroscopy) and the corresponding electrochemical behavior of the electrolytes. It was found that by creating specific chelating conditions, with an appropriate Mg salt, the desired electrochemical behavior could be obtained, i.e. reversible electrodeposition and dissolution. Removal of TFSI -- contact ion pairs from the Mg2+ solvation shell was found to be essential for reversible electrodeposition. Ionic liquids with polyethylene glycol chains pendent from a parent pyrrolidinium cation were synthesized and used to create the necessary complexes with Mg 2+, from Mg(BH4)2, so that reversible electrodeposition from a purely ionic liquid medium was achieved. The following document discusses findings from several electrochemical experiments on magnesium electrolytes in ionic liquids. Explanations for the failure of many of these systems to produce reversible Mg electrodeposition are provided. The key characteristics of ionic liquid systems that are capable of achieving reversible Mg

  16. Synthesis of magnesium diboride by magnesium vapor infiltration process (MVIP)

    DOEpatents

    Serquis, Adriana C.; Zhu, Yuntian T.; Mueller, Frederick M.; Peterson, Dean E.; Liao, Xiao Zhou

    2003-01-01

    A process of preparing superconducting magnesium diboride powder by heating an admixture of solid magnesium and amorphous boron powder or pellet under an inert atmosphere in a Mg:B ratio of greater than about 0.6:1 at temperatures and for time sufficient to form said superconducting magnesium diboride. The process can further include exposure to residual oxygen at high synthesis temperatures followed by slow cooling. In the cooling process oxygen atoms dissolved into MgB.sub.2 segregated to form nanometer-sized coherent Mg(B,O) precipitates in the MgB.sub.2 matrix, which can act as flux pinning centers.

  17. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O, CAS... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to...

  18. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O, CAS... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in...

  19. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium oxide. 184.1431 Section 184.1431 Food and... Substances Affirmed as GRAS § 184.1431 Magnesium oxide. (a) Magnesium oxide (MgO, CAS Reg. No. 1309-48-4... powder (light) or a relatively dense white powder (heavy) by heating magnesium hydroxide or...

  20. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium hydroxide. 184.1428 Section 184.1428 Food... Specific Substances Affirmed as GRAS § 184.1428 Magnesium hydroxide. (a) Magnesium hydroxide (Mg(OH)2, CAS... a white precipitate by the addition of sodium hydroxide to a water soluble magnesium salt or...

  1. Mineral resource of the month: magnesium

    USGS Publications Warehouse

    Kramer, Deborah A.

    2012-01-01

    Magnesium is the eighthmost abundant element in Earth’s crust, and the second-most abundant metal ion in seawater. Although magnesium is found in more than 60 minerals, only brucite, dolomite, magnesite and carnallite are commercially important for their magnesium content. Magnesium and its compounds also are recovered from seawater, brines found in lakes and wells, and bitterns (salts).

  2. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... salt or by hydration of reactive grades of magnesium oxide. (b) The ingredient meets the specifications... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium hydroxide. 184.1428 Section 184.1428... Listing of Specific Substances Affirmed as GRAS § 184.1428 Magnesium hydroxide. (a) Magnesium...

  3. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food... Specific Substances Affirmed as GRAS § 184.1431 Magnesium oxide. (a) Magnesium oxide (MgO, CAS Reg. No... light magnesium oxide. Heating the salts under more rigorous conditions (1200 °C for 12 hours)...

  4. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... magnesium oxide, hydroxide, or carbonate with sulfuric acid and evaporating the solution to crystallization... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food... Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a) Magnesium sulfate (MgSO4·7H2O,...

  5. Role of Cellular Magnesium in Human Diseases

    PubMed Central

    Long, Samantha; Romani, Andrea MP

    2015-01-01

    Magnesium is required for many of the major organs to function and plays a crucial role in human and mammalian physiology. Magnesium is essential for the structure of bones and teeth, acts as a cofactor for more than 300 enzymes in the body, including binding to ATP for kinase reactions, and affects permeability of excitable membranes and neuromuscular transmission. Despite these essential roles, much is still unknown about magnesium physiology and homeostasis. Currently, nutritionists believe that the general population intakes insufficient magnesium daily through the diet. The effects of magnesium deficiency are, for the most part undetected, and simple, widespread assessments of magnesium intake remain unavailable for humans. Many of the patients admitted to hospitals or medical care facilities are unaware of their low magnesium levels. Moreover, because magnesium is predominantly an intracellular cation (>99%), serum magnesium levels remain a poor predictor of tissue magnesium content and availability. This review will discuss the effects of magnesium deficiency in various pathologies affecting the human population. The underlying causes for magnesium depletion in major physiological systems will be examined along with the involved signaling pathways and the main roles of magnesium homeostasis. Where possible (e.g. alcoholism), the implications of administering supplemental magnesium will be discussed. Ultimately, this review will advocate for the necessity of identifying easy and reproducible methods to assess serum and cellular magnesium levels and to identify magnesium deficiency in order to alleviate related pathological conditions. PMID:25839058

  6. In situ synthesis of magnesium-substituted biphasic calcium phosphate and in vitro biodegradation

    SciTech Connect

    Kim, Tae-Wan; Lee, Hyeong-Shin; Kim, Dong-Hyun; Jin, Hyeong-Ho; Hwang, Kyu-Hong; Lee, Jong Kook; Park, Hong-Chae; Yoon, Seog-Young

    2012-09-15

    Highlights: ► Mg–BCP were successfully prepared through in situ aqueous co-precipitation method. ► The amount of β-TCP phase was changed with the magnesium substitution level. ► The substitution of magnesium led to a decrease in the unit cell volume. ► Mg–BCP could be able to develop a new apatite phase on the surface faster than BCP. -- Abstract: In situ preparation of magnesium (Mg) substituted biphasic calcium phosphate (BCP) of hydroxyapatite (HAp)/β-tricalcium phosphate (β-TCP) were carried out through aqueous co-precipitation method. The concentrations of added magnesium were varied with the calcium in order to obtain constant (Ca + Mg)/P ratios of 1.602. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized magnesium substituted BCP powders. The results have shown that substitution of magnesium in the calcium deficient apatites revealed the formation of biphasic mixtures of different HAp/β-TCP ratios after heating at 1000 °C. The ratios of the formation of phase mixtures were dependent on the content of magnesium. After immersing in Hanks’ balanced salt solution (HBSS) for 1 week, 1 wt% magnesium substituted BCP powders were degraded and precipitation started to be formed with small granules consisting of number of flake-like crystal onto the surface of synthesized powders. On the other hand, in the case of pure BCP powders, the formation of new precipitates was detected after immersion in HBSS for 2 weeks. On the basis of these results, magnesium substituted BCP could be able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. In addition, the retention time to produce the new apatite phase in implantation operation for the BCP powder could be controlled by the amount of magnesium substitution.

  7. 7 CFR 917.8 - Pure grower or pure producer.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 917.8 Pure grower or pure producer. (a) For peaches,...

  8. 7 CFR 917.8 - Pure grower or pure producer.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE FRESH PEARS AND PEACHES GROWN IN CALIFORNIA Order Regulating Handling Definitions § 917.8 Pure grower or pure producer. (a) For peaches,...

  9. Magnesium and hearing.

    PubMed

    Cevette, Michael J; Vormann, Jürgen; Franz, Kay

    2003-01-01

    The last several decades have revealed clinical and experimental data regarding the importance of magnesium (Mg) in hearing. Increased susceptibility to noise damage, ototoxicity, and auditory hyperexcitability are linked to states of Mg deficiency. Evidence for these processes has come slowly and direct effects have remained elusive because plasma Mg levels do not always correlate with its deficiency. Despite the major progress in the understanding of cochlear mechanical and auditory nerve function, the neurochemical and pharmacologic role of Mg is not clear. The putative mechanism suggests that Mg deficiency may contribute to a metabolic cellular cascade of events. Mg deficiency leads to an increased permeability of the calcium channel in the hair cells with a consequent over influx of calcium, an increased release of glutamate via exocytosis, and over stimulation of NMDA receptors on the auditory nerve. This paper provides a current overview of relevant Mg metabolism and deficiency and its influence on hearing. PMID:12940704

  10. Magnesium: Engineering the Surface

    NASA Astrophysics Data System (ADS)

    Chen, X. B.; Yang, H. Y.; Abbott, T. B.; Easton, M. A.; Birbilis, N.

    2012-06-01

    Magnesium (Mg) and its alloys provide numerous benefits as lightweight materials; however, industrial deployment of Mg in most instances requires anticorrosion coatings. Engineering the Mg surface is an area that has been undergoing intense research recently. Surface engineering commences with the "pretreatment" step, which can be used to modify the surface composition and morphology, resulting in surface enrichment or depletion of alloying elements. Following this, electrochemical plating (including electro- and electroless plating) and conversion coatings have emerged as common means of coating Mg. In this study, we present the key aspects relating to the science and technology associated with pretreatment, electrochemical plating, and conversion coatings. This is followed by experimental examples of engineered surfaces of industrial relevance.

  11. Mechanical properties of several magnesium and aluminum composites. Final report

    SciTech Connect

    Tsangarakis, N.; Taleghani, B.

    1992-12-01

    Several composites of magnesium and aluminum alloys were tested in order to assess and evaluate their mechanical properties. The magnesium alloys were AZ91 C, ZE41 A, and commercially pure magnesium, reinforced with 40% by volume continuous graphite fiber. The tensile properties of these composites were not superior to those of unreinforced magnesium and estimates of their fracture toughness were low. The matrices of the aluminum composites were 2124-T6, 6061-T4, 2124-T4, and 2219-T4. The reinforcements were either particulate or whiskers of silicon carbide or boron carbide and their volume content was 15% to 30%. The aluminum composites which were reinforced with silicon carbide particulate exhibited improved yield and ultimate tensile stresses, as well as tensile elastic modulus over the unreinforced aluminum alloys. The 2124-T4/B4C/25p composite exhibited the highest ultimate tensile strength which was 511 MPa. The composite which was reinforced with whiskers of silicon carbide exhibited an endurance limit which was 20% higher than that of the matrix alloy. The compressive properties and fracture toughness of some of these aluminum composites were not improved over those of the unreinforced matrix alloy.... Composites, Mechanical properties.

  12. Mechanical degradation of porous titanium with entangled structure filled with biodegradable magnesium in Hanks' solution.

    PubMed

    Li, Qiuyan; Jiang, Guofeng; Wang, Cunlong; Dong, Jie; He, Guo

    2015-12-01

    The degradation behavior of the porous titanium with entangled structure filled with biodegradable magnesium (p-Ti/Mg) in Hanks' solution was investigated. It was found that the p-Ti/Mg composite had higher strength than pure magnesium and porous titanium with entangled structure (p-Ti). Although the magnesium in p-Ti/Mg was completely dissolved in Hanks' solution after immersion for 104 h, the rest of the sample still maintained strength of about 86 MPa. Moreover, the produced porousness (due to magnesium-degradation) could provide channels for the ingrowth and transportation of bone cells. However, the high corrosion rate of p-Ti/Mg is still a problem when used as a candidate biomedical material, which needs further improvement. PMID:26354275

  13. Magnesium-aspartate-based crystallization switch inspired from shell molt of crustacean

    PubMed Central

    Tao, Jinhui; Zhou, Dongming; Zhang, Zhisen; Xu, Xurong; Tang, Ruikang

    2009-01-01

    Many animals such as crustacean periodically undergo cyclic molt of the exoskeleton. During this process, amorphous calcium mineral phases are biologically stabilized by magnesium and are reserved for the subsequent rapid formation of new shell tissue. However, it is a mystery how living organisms can regulate the transition of the precursor phases precisely. We reveal that the shell mineralization from the magnesium stabilized precursors is associated with the presence of Asp-rich proteins. It is suggested that a cooperative effect of magnesium and Asp-rich compound can result into a crystallization switch in biomineralization. Our in vitro experiments confirm that magnesium increases the lifetime of amorphous calcium carbonate and calcium phosphate in solution so that the crystallization can be temporarily switched off. Although Asp monomer alone inhibits the crystallization of pure amorphous calcium minerals, it actually reduces the stability of the magnesium-stabilized precursors to switch on the transformation from the amorphous to crystallized phases. These modification effects on crystallization kinetics can be understood by an Asp-enhanced magnesium desolvation model. The interesting magnesium-Asp-based switch is a biologically inspired lesson from nature, which can be developed into an advanced strategy to control material fabrications. PMID:20007788

  14. Pure Autonomic Failure.

    PubMed

    Thaisetthawatkul, Pariwat

    2016-08-01

    Pure autonomic failure (PAF) is a rare sporadic neurodegenerative autonomic disorder characterized by slowly progressive pan autonomic failure without other features of neurologic dysfunctions. The main clinical symptoms result from neurogenic orthostatic hypotension and urinary and gastrointestinal autonomic dysfunctions. Autonomic failure in PAF is caused by neuronal degeneration of pre- and postganglionic sympathetic and parasympathetic neurons in the thoracic spinal cord and paravertebral autonomic ganglia. The presence of Lewy bodies and α-synuclein deposits in these neural structures suggests that PAF is one of Lewy body synucleinopathies, examples of which include multiple system atrophy, Parkinson disease, and Lewy body disease. There is currently no specific treatment to stop progression in PAF. Management of autonomic symptoms is the mainstay of treatment and includes management of orthostatic hypotension and supine hypertension. The prognosis for survival of PAF is better than for the other synucleinopathies. PMID:27338613

  15. 76 FR 56396 - Magnesium Metal from the Russian Federation: Final Results of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-13

    ... of Antidumping Duty Administrative Review, 76 FR 26247 (May 6, 2011) (Preliminary Results). We... FR 13128 (March 10, 2011). The subject merchandise includes the following pure and alloy magnesium... Granular Form From the People's Republic of China, 66 FR 49345 (September 27, 2001), Notice of...

  16. Magnesium status and digoxin toxicity.

    PubMed Central

    Young, I S; Goh, E M; McKillop, U H; Stanford, C F; Nicholls, D P; Trimble, E R

    1991-01-01

    1. Eighty-one hospital patients receiving digoxin were separated into groups with and without digoxin toxicity using clinical criteria. Serum digoxin, sodium, potassium, calcium, creatinine, magnesium and monocyte magnesium concentrations were compared. 2. Subjects with digoxin toxicity had impaired colour vision (P less than 0.0001, Farnsworth-Munsell 100 hue test) and increased digoxin levels (1.89 (1.56-2.21) vs 1.34 (1.20-1.47) nmol l-1, P less than 0.01) (mean (95% confidence limits], though there was considerable overlap between two groups. 3. Subjects with digoxin toxicity had lower levels of serum magnesium (0.80 (0.76-0.84) vs 0.88 (0.85-0.91) mmol l-1, P less than 0.01) and monocyte magnesium (6.40 (5.65-7.16) vs 8.76 (7.81-9.71) mg g-1 DNA, P less than 0.01), but there were no significant differences in other biochemical parameters. A greater proportion of toxic subjects were receiving concomitant diuretic therapy (20/21 vs 37/60, P less than 0.05). 4. Magnesium deficiency was the most frequently identified significant electrolyte disturbance in relation to digoxin toxicity. In the presence of magnesium deficiency digoxin toxicity developed at relatively low serum digoxin concentrations. PMID:1768564

  17. Weakening of ice by magnesium perchlorate hydrate

    USGS Publications Warehouse

    Lenferinka, Hendrick J.; Durhama, William B.; Sternb, Laura A.; Patharec, Asmin V.

    2013-01-01

    We show that perchlorate hydrates, which have been detected at high circumpolar martian latitudes, have a dramatic effect upon the rheological behavior of polycrystalline water ice under conditions applicable to the North Polar Layered Deposits (NPLD). We conducted subsolidus creep tests on mixtures of ice and magnesium perchlorate hydrate, Mg(ClO4)2·6H2O (MP6), of 0.02, 0.05, 0.10, and 0.47 volume fraction MP6. We found these mixtures to be increasingly weak with increasing MP6 content. For mixtures with ⩽0.10 volume fraction MP6, we resolved a stress exponent of n ≈ 2 at low stresses transitioning to n ≈ 4 above 10 MPa. Scanning electron microscopy of deformed specimens revealed MP6 to be distributed as an interconnected film between ice grains. These results suggest that grain boundary sliding (GBS) may be enhanced with respect to pure ice. As the enhancement of GBS is expected in polycrystalline aggregates containing a few percent melt or otherwise weak material distributed along grain boundaries, the observed n ≈ 2 is consistent with the mutual accommodation of basal slip and GBS. If ice containing trace concentrations of MP6 is also much weaker than pure ice at low stresses, flow in the NPLD could be significantly enhanced, particularly at the warmer basal temperatures associated with higher martian obliquities.

  18. Weakening of ice by magnesium perchlorate hydrate

    NASA Astrophysics Data System (ADS)

    Lenferink, Hendrik J.; Durham, William B.; Stern, Laura A.; Pathare, Asmin V.

    2013-08-01

    We show that perchlorate hydrates, which have been detected at high circumpolar martian latitudes, have a dramatic effect upon the rheological behavior of polycrystalline water ice under conditions applicable to the North Polar Layered Deposits (NPLD). We conducted subsolidus creep tests on mixtures of ice and magnesium perchlorate hydrate, Mg(ClO4)2·6H2O (MP6), of 0.02, 0.05, 0.10, and 0.47 volume fraction MP6. We found these mixtures to be increasingly weak with increasing MP6 content. For mixtures with ⩽0.10 volume fraction MP6, we resolved a stress exponent of n ≈ 2 at low stresses transitioning to n ≈ 4 above 10 MPa. Scanning electron microscopy of deformed specimens revealed MP6 to be distributed as an interconnected film between ice grains. These results suggest that grain boundary sliding (GBS) may be enhanced with respect to pure ice. As the enhancement of GBS is expected in polycrystalline aggregates containing a few percent melt or otherwise weak material distributed along grain boundaries, the observed n ≈ 2 is consistent with the mutual accommodation of basal slip and GBS. If ice containing trace concentrations of MP6 is also much weaker than pure ice at low stresses, flow in the NPLD could be significantly enhanced, particularly at the warmer basal temperatures associated with higher martian obliquities.

  19. Studies on structural properties of clay magnesium ferrite nano composite

    NASA Astrophysics Data System (ADS)

    Kaur, Manpreet; Singh, Mandeep; Jeet, Kiran; Kaur, Rajdeep

    2015-08-01

    Magnesium ferrite-bentonite clay composite was prepared by sol-gel combustion method employing citric acid as complexing agent and fuel. The effect of clay on the structural properties was studied with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) Spectroscopy, Scanning electron microscopy (SEM), SEM- Energy dispersive Spectroscope (EDS) and BET surface area analyzer. Decrease in particle size and density was observed on addition of bentonite clay. The BET surface area of nano composite containing just 5 percent clay was 74.86 m2/g. Whereas porosity increased from 40.5 per cent for the pure magnesium ferrite to 81.0 percent in the composite showing that nano-composite has potential application as an adsorbent.

  20. Studies on structural properties of clay magnesium ferrite nano composite

    SciTech Connect

    Kaur, Manpreet Singh, Mandeep; Jeet, Kiran Kaur, Rajdeep

    2015-08-28

    Magnesium ferrite-bentonite clay composite was prepared by sol-gel combustion method employing citric acid as complexing agent and fuel. The effect of clay on the structural properties was studied with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) Spectroscopy, Scanning electron microscopy (SEM), SEM- Energy dispersive Spectroscope (EDS) and BET surface area analyzer. Decrease in particle size and density was observed on addition of bentonite clay. The BET surface area of nano composite containing just 5 percent clay was 74.86 m{sup 2}/g. Whereas porosity increased from 40.5 per cent for the pure magnesium ferrite to 81.0 percent in the composite showing that nano-composite has potential application as an adsorbent.

  1. Magnesium and fetal growth

    SciTech Connect

    Weaver, K.

    1988-01-01

    Fetal growth retardation and premature labor are major problems in perinatal medicine today and account for a great deal of the observed fetal morbidity. While the neonatal death rate has steadily declined over the past decade, there has been a lack of concommitant decrease in these two leading problems. Magnesium (Mg/sup ++/) plays a major role in both of these areas of concern. The fact that it is used as a treatment for premature labor has led investigators to look at low Mg/sup ++/ as a possible cause of this poorly understood phenomenon. The second major cause of small for gestational age infants is intrauterine growth retardation, a condition which may be of either fetal or maternal origin. In either case, Mg/sup ++/ may be implicated since it exerts a strong influence on the underlying pathophysiology of placental failure and maternal hypertension. Both of these conditions are mediated by vascular and platelet hyperactivity as well as by and increase in the ration of thromboxane to prostacyclin. Studies in both the human and animal species are beginning to show how Mg/sup ++/ interacts in these conditions to produce such a damaging fetal outcome. The recent use of Doppler velocimetry of the developing fetus has shown reduced fetal vascular and maternal uterine vascular compliance as early as 14 weeks of gestation in those who would be so affected.

  2. Pure autonomic failure.

    PubMed

    Garland, Emily M; Hooper, William B; Robertson, David

    2013-01-01

    A 1925 report by Bradbury and Eggleston first described patients with extreme orthostatic hypotension and a low, steady heart rate. Evidence accumulated over the next two decades that patients with orthostatic hypotension include those with pure autonomic failure (PAF), characterized by isolated peripheral autonomic dysfunction and decreased norepinephrine synthesis; multiple system atrophy (MSA) with symptoms of a central Parkinson-like syndrome and normal resting plasma norepinephrine; and Parkinson's disease (PD), with lesions in postganglionic noradrenergic neurons and signs of autonomic dysfunction. All three disorders are classified as α-synucleinopathies. Insoluble deposits of α-synuclein are found in glia in MSA, whereas they take the form of neuronal cytoplasmic inclusions called Lewy bodies in PAF and PD. The exact relationship between α-synuclein deposits and the pathology remains undetermined. PAF occurs sporadically, and progresses slowly with a relatively good prognosis. However, it has been proposed that some cases of PAF may develop a central neurodegenerative disorder. Differentiation between PAF, MSA, and PD with autonomic failure can be facilitated by a number of biochemical and functional tests and by imaging studies. Cardiac sympathetic innervation is generally intact in MSA but decreased or absent in Parkinson's disease with autonomic failure and PAF. Treatment of PAF is directed at relieving symptoms with nonpharmacological interventions and with medications producing volume expansion and vasoconstriction. Future studies should focus on determining the factors that lead to central rather than solely peripheral neurodegeneration. PMID:24095130

  3. Cobalt-Magnesium and Iron-Magnesium Complexes with Weakened Dinitrogen Bridges

    PubMed Central

    Dugan, Thomas R.; MacLeod, K. Cory; Brennessel, William W.

    2013-01-01

    The cooperative binding of N2 by late transition metals and main-group metals is a promising strategy for N-N bond weakening and activation. We report the use of activated Rieke magnesium for reduction of iron and cobalt complexes supported by bulky β-diketiminate ligands. Binding of N2 is accompanied by assembly of a linear M-NN-Mg-NN-M (M = Co, Fe) core with N-N bonds that are weakened, as judged by infrared spectroscopy. Both the cobalt and iron complexes require THF solvent, because of Mg-THF binding. The cobalt complex can be isolated as a pure solid, but the iron complex is stable only in solution. These results demonstrate the correlation between the binding mode and N-N weakening in heterobimetallic N2 complexes. PMID:24367236

  4. Pure optical photoacoustic microscopy

    PubMed Central

    Xie, Zhixing; Chen, Sung-Liang; Ling, Tao; Guo, L. Jay; Carson, Paul L.; Wang, Xueding

    2011-01-01

    The concept of pure optical photoacoustic microscopy(POPAM) was proposed based on optical rastering of a focused excitation beam and optically sensing the photoacoustic signal using a microring resonator fabricated by a nanoimprinting technique. After the refinements of the microring’s working wavelength and in the resonator structure and mold fabrication, an ultrahigh Q factor of 3.0×105 was achieved which provided high sensitivity with a noise equivalent detectable pressure(NEDP) value of 29Pa. This NEDP is much lower than the hundreds of Pascals achieved with existing optical resonant structures such as etalons, fiber gratings and dielectric multilayer interference filters available for acoustic measurement. The featured high sensitivity allowed the microring resonator to detect the weak photoacoustic signals from micro- or submicroscale objects. The inherent superbroad bandwidth of the optical microring resonator combined with an optically focused scanning beam provided POPAM with high resolution in the axial as well as both lateral directions while the axial resolution of conventional photoacoustic microscopy (PAM) suffers from the limited bandwidth of PZT detectors. Furthermore, the broadband microring resonator showed similar sensitivity to that of our most sensitive PZT detector. The current POPAM system provides a lateral resolution of 5 μm and an axial resolution of 8 μm, comparable to that achieved by optical microscopy while presenting the unique contrast of optical absorption and functional information complementing other optical modalities. The 3D structure of microvasculature, including capillary networks, and even individual red blood cells have been discerned successfully in the proof-of-concept experiments on mouse bladders ex vivo and mouse ears in vivo. The potential of approximately GHz bandwidth of the microring resonator also might allow much higher resolution than shown here in microscopy of optical absorption and acoustic propagation

  5. Cell Adhesion on Surface-Functionalized Magnesium.

    PubMed

    Wagener, Victoria; Schilling, Achim; Mainka, Astrid; Hennig, Diana; Gerum, Richard; Kelch, Marie-Luise; Keim, Simon; Fabry, Ben; Virtanen, Sannakaisa

    2016-05-18

    The biocompatibility of commercially pure magnesium-based (cp Mg) biodegradable implants is compromised of strong hydrogen evolution and surface alkalization due to high initial corrosion rates of cp Mg in the physiological environment. To mitigate this problem, the addition of corrosion-retarding alloying elements or coating of implant surfaces has been suggested. In the following work, we explored the effect of organic coatings on long-term cell growth. cp Mg was coated with aminopropyltriehtoxysilane + vitamin C (AV), carbonyldiimidazole (CDI), or stearic acid (SA). All three coatings have been previously suggested to reduce initial corrosion and to enhance protein adsorption and hence cell adhesion on magnesium surfaces. Endothelial cells (DH1+/+) and osteosarcoma cells (MG63) were cultured on coated samples for up to 20 days. To quantify Mg corrosion, electrochemical impedance spectroscopy (EIS) was measured after 1, 3, and 5 days of cell culture. We also investigated the speed of initial cell spreading after seeding using fluorescently labeled fibroblasts (NIH/3T3). Hydrogen evolution after contact with cell culture medium was markedly decreased on AV- and SA-coated Mg compared to uncoated Mg. These coatings also showed improved cell adhesion and spreading after 24 h of culture comparable to tissue-treated plastic surfaces. On AV-coated cp Mg, a confluent layer of endothelial cells formed after 5 days and remained intact for up to 20 days. Together, these data demonstrate that surface coating with AV is a viable strategy for improving long-term biocompatibility of cp Mg-based implants. EIS measurements confirmed that the presence of a confluent cell layer increased the corrosion resistance. PMID:27089250

  6. Magnesium silicide intermetallic alloys

    NASA Astrophysics Data System (ADS)

    Li, Gh.; Gill, H. S.; Varin, R. A.

    1993-11-01

    Methods of induction melting an ultra-low-density magnesium silicide (Mg2Si) intermetallic and its alloys and the resulting microstructure and microhardness were studied. The highest quality ingots of Mg2Si alloys were obtained by triple melting in a graphite crucible coated with boron nitride to eliminate reactivity, under overpressure of high-purity argon (1.3 X 105 Pa), at a temperature close to but not exceeding 1105 °C ± 5 °C to avoid excessive evaporation of Mg. After establishing the proper induction-melting conditions, the Mg-Si binary alloys and several Mg2Si alloys macroalloyed with 1 at. pct of Al, Ni, Co, Cu, Ag, Zn, Mn, Cr, and Fe were induction melted and, after solidification, investigated by optical microscopy and quantitative X-ray energy dispersive spectroscopy (EDS). Both the Mg-rich and Si-rich eutectic in the binary alloys exhibited a small but systematic increase in the Si content as the overall composition of the binary alloy moved closer toward the Mg2Si line compound. The Vickers microhardness (VHN) of the as-solidified Mg-rich and Si-rich eutectics in the Mg-Si binary alloys decreased with increasing Mg (decreasing Si) content in the eutectic. This behavior persisted even after annealing for 75 hours at 0.89 pct of the respective eutectic temperature. The Mg-rich eutectic in the Mg2Si + Al, Ni, Co, Cu, Ag, and Zn alloys contained sections exhibiting a different optical contrast and chemical composition than the rest of the eutectic. Some particles dispersed in the Mg2Si matrix were found in the Mg2Si + Cr, Mn, and Fe alloys. The EDS results are presented and discussed and compared with the VHN data.

  7. Magnesium/Calcium Competition at Excitable Membranes.

    ERIC Educational Resources Information Center

    Belzer, Bill; Fry, Panni

    1998-01-01

    Considers some consequences of altering intracellular calcium supply by magnesium concentration changes. Focuses on using this procedure as an exercise with allied health students as they witness therapeutic uses of magnesium and other calcium entry inhibitors. (DDR)

  8. Lightweight magnesium-lithium alloys show promise

    NASA Technical Reports Server (NTRS)

    Adams, W. T.; Cataldo, C. E.

    1964-01-01

    Evaluation tests show that magnesium-lithium alloys are lighter and more ductile than other magnesium alloys. They are being used for packaging, housings, containers, where light weight is more important than strength.

  9. Magnesium Based Materials and their Antimicrobial Activity

    NASA Astrophysics Data System (ADS)

    Robinson, Duane Allan

    The overall goals of this body of work were to characterize the antimicrobial properties of magnesium (Mg) metal and nano-magnesium oxide (nMgO) in vitro, to evaluate the in vitro cytotoxicity of Mg metal, and to incorporate MgO nanoparticles into a polymeric implant coating and evaluate its in vitro antimicrobial properties. In the course of this work it was found that Mg metal, Mg-mesh, and nMgO have in vitro antimicrobial properties that are similar to a bactericidal antibiotic. For Mg metal, the mechanism of this activity appears to be related to an increase in pH (i.e. a more alkaline environment) and not an increase in Mg2+. Given that Mg-mesh is a Mg metal powder, the assumption is that it has the same mechanism of activity as Mg metal. The mechanism of activity for nMgO remains to be elucidated and may be related to a combination of interaction of the nanoparticles with the bacteria and the alkaline pH. It was further demonstrated that supernatants from suspensions of Mg-mesh and nMgO had the same antimicrobial effect as was noted when the particles were used. The supernatant from Mg-mesh and nMgO was also noted to prevent biofilm formation for two Staphylococcus strains. Finally, poly-epsilon-caprolactone (PCL) composites of Mg-mesh (PCL+Mg-mesh) and nMgO (PCL+nMgO) were produced. Coatings applied to screws inhibited growth of Escherichia coli and Pseudomonas aeruginosa and in thin disc format inhibited the growth of Staphylococcus aureus in addition to the E. coli and P. aeruginosa. Pure Mg metal was noted to have some cytotoxic effect on murine fibroblast and osteoblast cell lines, although this effect needs to be characterized further. To address the need for an in vivo model for evaluating implant associated infections, a new closed fracture osteomyelitis model in the femur of the rat was developed. Magnesium, a readily available and inexpensive metal was shown to have antimicrobial properties that appear to be related to its corrosion products and

  10. Solid-state rechargeable magnesium battery

    DOEpatents

    Shao, Yuyan; Liu, Jun; Liu, Tianbiao; Li, Guosheng

    2016-09-06

    Embodiments of a solid-state electrolyte comprising magnesium borohydride, polyethylene oxide, and optionally a Group IIA or transition metal oxide are disclosed. The solid-state electrolyte may be a thin film comprising a dispersion of magnesium borohydride and magnesium oxide nanoparticles in polyethylene oxide. Rechargeable magnesium batteries including the disclosed solid-state electrolyte may have a coulombic efficiency .gtoreq.95% and exhibit cycling stability for at least 50 cycles.

  11. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium carbonate. 184.1425 Section 184.1425 Food... Specific Substances Affirmed as GRAS § 184.1425 Magnesium carbonate. (a) Magnesium carbonate (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium...

  12. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  13. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate by the addition of...

  14. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  15. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium carbonate. 184.1425 Section 184.1425... GRAS § 184.1425 Magnesium carbonate. (a) Magnesium carbonate (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as magnesium carbonate hydroxide. It is a...

  16. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  17. 21 CFR 184.1440 - Magnesium stearate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium stearate. 184.1440 Section 184.1440 Food... Specific Substances Affirmed as GRAS § 184.1440 Magnesium stearate. (a) Magnesium stearate (Mg(C17H34COO)2, CAS Reg. No. 557-04-0) is the magnesium salt of stearic acid. It is produced as a white precipitate...

  18. Dislocation Creep in Magnesium Calcite

    NASA Astrophysics Data System (ADS)

    Xu, L.; Xiao, X.; Evans, B. J.

    2003-12-01

    To investigate the effect of dissolved Mg on plastic deformation of calcite, we performed triaxial deformation experiments on synthetic calcite with varying amount of Mg content. Mixtures of powders of calcite and dolomite were isostatically hot pressed (HIP) at 850° C and 300 MPa confining pressure for different intervals (2 to 20hrs) resulting in homogeneous aggregates of high-magnesium calcite; Mg content varied from 0.07 to 0.17 mol%. Creep tests were performed at differential stresses from 20 to 160 MPa at 700 to 800° C. Grain sizes before and after deformation were determined from the images obtained from scanning electron microscope (SEM) and optical microscope. Grain sizes are in the range of 5 to 20 microns depending on the HIP time, and decrease with increasing magnesium content. Both BSE images and chemical analysis suggest that all dolomite are dissolved and the Mg distribution is homogeneous through the sample, after 2 hrs HIP. At stresses below 40 MPa, the samples deformed in diffusion region (Coble creep), as described previously by Herwegh. The strength decreases with increasing magnesium content, owing to the difference of grain size. At stresses above 80 MPa, the stress exponent is greater than 3, indicating an increased contribution of dislocation creep. The transition between diffusion to dislocation creep occurs at higher stresses for the samples with higher magnesium content and smaller grain size. Preliminary data suggests a slight increase in strength with increasing magnesium content, but more tests are needed to verify this effect. In a few samples, some strain weakening may have been evident. The activation energy in the transition region (at 80 MPa) is ˜200 KJ/mol with no dependence on magnesium content, agreeing with previous measurements of diffusion creep in natural and synthetic marbles.

  19. Electrochemical investigations of magnesium in DMEM with biodegradable polycaprolactone coating as corrosion barrier

    NASA Astrophysics Data System (ADS)

    Degner, Julia; Singer, Ferdinand; Cordero, Luis; Boccaccini, Aldo R.; Virtanen, Sannakaisa

    2013-10-01

    Magnesium and its alloys are being increasingly investigated as biodegradable metallic implant materials. However, the high corrosion rate and accumulation of hydrogen gas upon degradation prevent the clinical application of many magnesium based materials. Applying polymer or ceramic coatings is a popular approach to improve the corrosion behaviour of magnesium and its alloys. In the current research, a biodegradable polymer film of polycaprolactone (PCL) is prepared in different concentrations by spin coating, in order to influence the corrosion behaviour of 99.9% pure magnesium. The resulting polymer coating was qualified by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and tape-test according to ASTM D3359-09 to measure the adhesion strength of the coating on the substrate. Furthermore, coated and uncoated specimens were stored up to 30 days at 37 ̊C in DMEM. The corrosion behaviour was investigated by polarization curves. The PCL-films were found to be uniform and without pores, but they show a low adhesion strength on the substrate. Nevertheless, remarkable improvement of the corrosion resistance of magnesium substrate can be obtained by the polymer films, depending on the film thickness and exposition time. In summary, coating magnesium with PCL is a promising method to tailor the degradation behaviour for biomedical applications.

  20. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  1. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium oxide. 582.5431 Section 582.5431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  2. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium sulfate. 582.5443 Section 582.5443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  3. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Magnesium labeling. 201.71 Section 201.71 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.71 Magnesium labeling. (a) The labeling of over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  4. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  5. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  6. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  7. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  8. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium phosphate. 582.5434 Section 582.5434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  9. Synthesis of superconducting magnesium diboride objects

    DOEpatents

    Finnemore, Douglas K.; Canfield, Paul C.; Bud'ko, Sergey L.; Ostenson, Jerome E.; Petrovic, Cedomir; Cunningham, Charles E.; Lapertot, Gerard

    2003-08-15

    A process to produce magnesium diboride objects from boron objects with a similar form is presented. Boron objects are reacted with magnesium vapor at a predetermined time and temperature to form magnesium diboride objects having a morphology similar to the boron object's original morphology.

  10. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  11. Synthesis Of Superconducting Magnesium Diboride Objects.

    DOEpatents

    Finnemore, Douglas K.; Canfield, Paul C.; Bud'ko, Sergey L.; Ostenson, Jerome E.; Petrovic, Cedomir; Cunningham, Charles E.; Lapertot, Gerard

    2003-07-08

    A process to produce magnesium diboride objects from boron objects with a similar form is presented. Boron objects are reacted with magnesium vapor at a predetermined time and temperature to form magnesium diboride objects having a morphology similar to the boron object's original morphology.

  12. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium oxide. 582.5431 Section 582.5431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  13. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  14. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1431 Magnesium oxide. (a) Magnesium...

  15. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  16. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This substance...

  17. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium oxide. 582.5431 Section 582.5431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  18. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium oxide. 582.5431 Section 582.5431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5431 Magnesium oxide. (a) Product. Magnesium oxide. (b) Conditions of use. This...

  19. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium phosphate. 582.5434 Section 582.5434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  20. Magnesium, Inflammation, and Obesity in Chronic Disease

    Technology Transfer Automated Retrieval System (TEKTRAN)

    About 60% of U.S. adults do not consume the Estimated Average Intake for magnesium, but widespread pathological conditions attributed to magnesium deficiency have not been reported. However, low magnesium status has been associated with numerous pathological conditions characterized as having a chr...

  1. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  2. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  3. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  4. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  5. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  6. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium sulfate. 582.5443 Section 582.5443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  7. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  8. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  9. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  10. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  11. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  12. 21 CFR 582.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium hydroxide. 582.1428 Section 582.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1428 Magnesium hydroxide. (a) Product. Magnesium hydroxide. (b) Conditions of use....

  13. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium sulfate. 582.5443 Section 582.5443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  14. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  15. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Magnesium sulfate. 582.5443 Section 582.5443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  16. 21 CFR 582.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium carbonate. 582.1425 Section 582.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1425 Magnesium carbonate. (a) Product. Magnesium carbonate. (b) Conditions of use....

  17. 21 CFR 582.2437 - Magnesium silicate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium silicate. 582.2437 Section 582.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Magnesium silicate. (a) Product. Magnesium silicate. (b) Tolerance. 2 percent. (c) Limitations,...

  18. 21 CFR 582.5443 - Magnesium sulfate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium sulfate. 582.5443 Section 582.5443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5443 Magnesium sulfate. (a) Product. Magnesium sulfate. (b) Conditions of use....

  19. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Magnesium phosphate. 582.5434 Section 582.5434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  20. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium phosphate. 582.5434 Section 582.5434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  1. 21 CFR 582.5434 - Magnesium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Magnesium phosphate. 582.5434 Section 582.5434 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5434 Magnesium phosphate. (a) Product. Magnesium phosphate (di- and tribasic)....

  2. Microstructure and wear resistance of Al-SiC composites coatings on ZE41 magnesium alloy

    NASA Astrophysics Data System (ADS)

    Rodrigo, P.; Campo, M.; Torres, B.; Escalera, M. D.; Otero, E.; Rams, J.

    2009-08-01

    Al and Al-SiC composites coatings were prepared by oxyacetylene flame spraying on ZE41 magnesium alloy substrates. Coatings with controlled reinforcement rate of up to 23 vol.% were obtained by spraying mixtures containing aluminium powder with up to 50 vol.% SiC particles. The coatings were sprayed on the magnesium alloy with minor degradation of its microstructure or mechanical properties. The coatings were compacted to improve their microstructure and protective behaviour. The wear behaviour of these coatings has been tested using the pin-on-disk technique and the reinforced coatings provided 85% more wear resistance than uncoated ZE41 and 400% more than pure Al coatings.

  3. Magnesium Borohydride as a Hydrogen Storage Material: Synthesis of Unsolvated Mg(BH4)2

    SciTech Connect

    Soloveichik, G.; Andrus, M; Gao, Y; Zhao, J; Kniajanski, S

    2009-01-01

    Different methods for preparation of unsolvated magnesium borohydride, a promising material for hydrogen storage, based on exchange reaction of MgCl2 with lithium and sodium borohydride in different solvents have been evaluated. A convenient scalable method for synthesis of pure Mg(BH4)2 by ball milling a mixture of MgCl2 and NaBH4 in diethyl ether has been developed. Crystalline stable low and high temperature phases, as well as a new metastable phase of unsolvated magnesium borohydride have been prepared.

  4. Magnesium Diboride Current Leads

    NASA Technical Reports Server (NTRS)

    Panek, John

    2010-01-01

    A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

  5. [The significance of magnesium in orthopedics. V. Magnesium in osteoporosis].

    PubMed

    Ditmar, R; Steidl, L

    1989-04-01

    The authors submit an investigation of 60 patients with senile, post-menopausal and drug-induced osteoporosis. Using the method of absorption spectrophotometry, they found a reduced level of Mg in red blood cells in 63.6% of senile, 66.7% postmenopausal and only in 22.2% drug-induced osteoporoses. Also the mean level of red cell magnesium was significantly lower in the group of senile (1.94 mmol) and postmenopausal (1.85 mmol) osteoporosis as compared with drug-induced osteoporosis (2.25 mmol). The authors revealed moreover that the level of red cell magnesium in the former two groups declines in proportion to the severity of osteoporosis and correlates thus with the clinical and X-ray finding. For treatment of osteoporisis the authors used magnesium lactate alone (in 37 patients) and combined with sodium fluoride (in 23 patients). In the majority of patients they had very favourable results. Based on laboratory and therapeutic results, consistent with data in the experimental literature, the authors assume that magnesium as a catalyst of bone metabolism and as one of the most important factors controlling the formation of bone matrix and its mineralization plays a significant role in the aetiopathogenesis of senile and postmenopausal osteoporosis. The authors assume that Mg deficiency which is increasing in recent years in soil as well as in foodstuffs and water may be the main cause of the increasing number of patients with osteoporosis in civilized countries. Magnesium should have its firm place not only in therapy but also in prevention of the majority of osteoporosis. PMID:2750424

  6. Novel Nonflammable Electrolytes for Secondary Magnesium Batteries and High Voltage Electrolytes for Electrochemcial Supercapacitors

    SciTech Connect

    Dixon, Brian

    2008-12-30

    Magnesium has been used successfully in primary batteries, but its use in rechargeable cells has been stymied by the lack of suitable non-aqueous electrolyte that can conduct Mg+2 species, combined with poor stripping and plating properties. The development of a suitable cathode material for rechargeable magnesium batteries has also been a roadblock, but a nonflammable electrolyte is key. Likewise, the development of safe high voltage electrochemical supercapaitors has been stymied by the use of flammable solvents in the liquid electrolyte; to wit, acetonitrile. The purpose of the research conducted in this effort was to identify useful compositions of magnesium salts and polyphosphate solvents that would enable magnesium ions to be cycled within a secondary battery design. The polyphosphate solvents would provide the solvent for the magnesium salts while preventing the electrolyte from being flammable. This would enable these novel electrolytes to be considered as an alternative to THF-based electrolytes. In addition, we explored several of these solvents together with lithium slats for use as high voltage electrolytes for carbon-based electrochemical supercapacitors. The research was successful in that: 1) Magnesium imide dissolved in a phosphate ester solvent that contains a halogented phosphate ester appears to be the preferred electrolyte for a rechargeable Mg cell. 2) A combination of B-doped CNTs and vanadium phosphate appear to be the cathode of choice for a rechargeable Mg cell by virtue of higher voltage and better reversibility. 3) Magnesium alloys appear to perform better than pure magnesium when used in combination with the novel polyphosphate electrolytes. Also, this effort has established that Phoenix Innovation's family of phosphonate/phosphate electrolytes together with specific lithium slats can be used in supercapacitor systems at voltages of greater than 10V.

  7. Major Minerals - Calcium, Magnesium, Phosphorus

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Calcium, magnesium and phosphorus are essential elements critically important for the function of the musculoskeletal system, including the formation and transduction of energy and the maintenance of healthy bone. The major calcium concern for physically active healthy middle-aged adults is to consu...

  8. A SEARCH FOR MAGNESIUM IN EUROPA'S ATMOSPHERE

    SciTech Connect

    Hoerst, S. M.; Brown, M. E.

    2013-02-20

    Europa's tenuous atmosphere results from sputtering of the surface. The trace element composition of its atmosphere is therefore related to the composition of Europa's surface. Magnesium salts are often invoked to explain Galileo Near Infrared Mapping Spectrometer spectra of Europa's surface, thus magnesium may be present in Europa's atmosphere. We have searched for magnesium emission in the Hubble Space Telescope Faint Object Spectrograph archival spectra of Europa's atmosphere. Magnesium was not detected and we calculate an upper limit on the magnesium column abundance. This upper limit indicates that either Europa's surface is depleted in magnesium relative to sodium and potassium, or magnesium is not sputtered as efficiently resulting in a relative depletion in its atmosphere.

  9. Mechanical Behavior of Magnesium Experienced Severe Plastic Deformation

    NASA Astrophysics Data System (ADS)

    Jiao, Xing

    This thesis reviewed the development of processing technologies, including forging, rolling, extrusion and equal channel angular pressing (ECAP). Among these technologies, ECAP technology to process pure magnesium was studied. This thesis describes what ECAP technology is and reviews the current research status of ECAP processed pure magnesium. This thesis studied the effects of temperature, passes and post-heat treatment on microstructures and sample hardness. Across each sample, the microstructure was observed. Experiments were conducted at 350°C, 250°C and 200°C to study the microstructure change as a function of temperature. It was found that as the temperature was decreased, the average grain size also decreased. We fixed the temperature at 200°C and used 1 pass, 2 passes, 4 passes and 8 passes to see the microstructure change right after pressing. The microstructure was altered significantly after post heat treatment. The more suitable post heat treatment for samples pressed at 200°C with 8 passes, is 300°C for 40 min with water cooling, by which we can get the smallest average grain size of 11.2 μm. The hardness was higher with more severe deformation, more passes, and lower pressing temperature, which has been increased more than 20% from 7.5HV right after pressing.

  10. Anticorrosive magnesium hydroxide coating on AZ31 magnesium alloy by hydrothermal method

    NASA Astrophysics Data System (ADS)

    Zhu, Yanying; Wu, Guangming; Zhao, Qing; Zhang, Yun-Hong; Xing, Guangjian; Li, Donglin

    2009-09-01

    Magnesium alloys are potential biodegradable biomaterials in orthopedic surgery. However, the rapid degradation rate has limited their application in biomedical field. A great deal of studies have been done to improve the resistance of magnesium alloys. In this article, An anticorrosive magnesium hydroxide coating with a thickness of approximately 100μm was formed on an AZ31 magnesium alloy by hydrothermal method. The morphology of the coatings were observed by an optical microscope and SEM. And the samples were soaked in hank's solution (37°C) to investigate the corrosion resistance. Magnesium alloy AZ31 with magnesium hydroxide coatings present superior corrosion resistance than untreated samples.

  11. The Degradation Interface of Magnesium Based Alloys in Direct Contact with Human Primary Osteoblast Cells

    PubMed Central

    Willumeit-Römer, Regine; Laipple, Daniel; Luthringer, Bérengère; Feyerabend, Frank

    2016-01-01

    Magnesium alloys have been identified as a new generation material of orthopaedic implants. In vitro setups mimicking physiological conditions are promising for material / degradation analysis prior to in vivo studies however the direct influence of cell on the degradation mechanism has never been investigated. For the first time, the direct, active, influence of human primary osteoblasts on magnesium-based materials (pure magnesium, Mg-2Ag and Mg-10Gd alloys) is studied for up to 14 days. Several parameters such as composition of the degradation interface (directly beneath the cells) are analysed with a scanning electron microscope equipped with energy dispersive X-ray and focused ion beam. Furthermore, influence of the materials on cell metabolism is examined via different parameters like active mineralisation process. The results are highlighting the influences of the selected alloying element on the initial cells metabolic activity. PMID:27327435

  12. Self-dissolution assisted coating on magnesium metal for biodegradable bone fixation devices

    NASA Astrophysics Data System (ADS)

    Khakbaz, Hadis; Walter, Rhys; Gordon, Timothy; Bobby Kannan, M.

    2014-12-01

    An attempt was made to develop a self-dissolution assisted coating on a pure magnesium metal for potential bone fixation implants. Magnesium phosphate cement (MPC) was coated successfully on the magnesium metal in ammonium dihydrogen phosphate solution. The in vitro degradation behaviour of the MPC coated metal was evaluated using electrochemical techniques. The MPC coating increased the polarisation resistance (RP) of the metal by ˜150% after 2 h immersion in simulated body fluid (SBF) and reduced the corrosion current density (icorr) by ˜80%. The RP of the MPC coated metal remained relatively high even after 8 h immersion period. However, post-degradation analysis of the MPC coated metal revealed localized attack. Hence, the study suggests that MPC coating alone may not be beneficial, but this novel coating could provide additional protection if used as a precursor for other potential coatings such as biodegradable polymers or calcium phosphates.

  13. Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys

    NASA Astrophysics Data System (ADS)

    Feliu, S., Jr.; Pardo, A.; Merino, M. C.; Coy, A. E.; Viejo, F.; Arrabal, R.

    2009-01-01

    X-ray photoelectron spectroscopy (XPS) was used in order to investigate the correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys exposed to 98% relative humidity at 50 °C. Commercially pure magnesium, used as the reference material, revealed MgO, Mg(OH) 2 and tracers of magnesium carbonate in the air-formed film. For the AZ80 and AZ91D alloys, the amount of magnesium carbonate formed on the surface reached similar values to those of MgO and Mg(OH) 2. A linear relation between the amount of magnesium carbonate formed on the surface and the subsequent corrosion behaviour in the humid environment was found. The AZ80 alloy revealed the highest amount of magnesium carbonate in the air-formed film and the highest atmospheric corrosion resistance, even higher than the AZ91D alloy, indicating that aluminium distribution in the alloy microstructure influenced the amount of magnesium carbonate formed.

  14. 75 FR 20817 - Magnesium Metal from the People's Republic of China: Preliminary Results of the 2008-2009...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-21

    ... ash, hydrocarbons, graphite, coke, silicon, rare earth metals/mischmetal, cryolite, silica/fly ash... Certain Iron-Metal Castings From India: Final Results of Countervailing Duty Administrative Review 65 FR... Duty Investigation of Pure Magnesium from the Russian Federation, 60 FR 25691 (May 12, 1995). \\2\\...

  15. Cellular response of chondrocytes to magnesium alloys for orthopedic applications.

    PubMed

    Liao, Yi; Xu, Qingli; Zhang, Jian; Niu, Jialing; Yuan, Guangyin; Jiang, Yao; He, Yaohua; Wang, Xinling

    2015-07-01

    In the present study, the effects of Mg-Nd-Zn-Zr (JDBM), brushite (CaHPO4·2H2O)-coated JDBM (C-JDBM), AZ31, WE43, pure magnesium (Mg) and Ti alloy (TC4) on rabbit chondrocytes were investigated in vitro. Adhesion experiments revealed the satisfactory morphology of chondrocytes on the surface of all samples. An indirect cytotoxicity test using MTT assay revealed that C‑JDBM and TC4 exhibited results similar to those of the negative control, better than those obtained with JDBM, AZ31, WE43 and pure Mg (p<0.05). There were no statistically significant differences observed between the JDBM, AZ31, WE43 and pure Mg group (p>0.05). The results of indirect cell cytotoxicity and proliferation assays, as well as those of apoptosis assay, glycosaminoglycan (GAG) quantification, assessment of collagen Ⅱ (Col Ⅱ) levels and RT-qPCR revealed a similar a trend as was observed with MTT assay. These findings suggested that the JDBM alloy was highly biocompatible with chondrocytes in vitro, yielding results similar to those of AZ31, WE43 and pure Mg. Furthermore, CaHPO4·2H2O coating significantly improved the biocompatibility of this alloy. PMID:25975216

  16. Cellular response of chondrocytes to magnesium alloys for orthopedic applications

    PubMed Central

    LIAO, YI; XU, QINGLI; ZHANG, JIAN; NIU, JIALING; YUAN, GUANGYIN; JIANG, YAO; HE, YAOHUA; WANG, XINLING

    2015-01-01

    In the present study, the effects of Mg-Nd-Zn-Zr (JDBM), brushite (CaHPO4·2H2O)-coated JDBM (C-JDBM), AZ31, WE43, pure magnesium (Mg) and Ti alloy (TC4) on rabbit chondrocytes were investigated in vitro. Adhesion experiments revealed the satisfactory morphology of chondrocytes on the surface of all samples. An indirect cytotoxicity test using MTT assay revealed that C-JDBM and TC4 exhibited results similar to those of the negative control, better than those obtained with JDBM, AZ31, WE43 and pure Mg (p<0.05). There were no statistically significant differences observed between the JDBM, AZ31, WE43 and pure Mg group (p>0.05). The results of indirect cell cytotoxicity and proliferation assays, as well as those of apoptosis assay, glycosaminoglycan (GAG) quantification, assessment of collagen II (Col II) levels and RT-qPCR revealed a similar a trend as was observed with MTT assay. These findings suggested that the JDBM alloy was highly biocompatible with chondrocytes in vitro, yielding results similar to those of AZ31, WE43 and pure Mg. Furthermore, CaHPO4·2H2O coating significantly improved the biocompatibility of this alloy. PMID:25975216

  17. Method for magnesium sulfate recovery

    DOEpatents

    Gay, Richard L.; Grantham, LeRoy F.

    1987-01-01

    A method of obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

  18. Method for magnesium sulfate recovery

    DOEpatents

    Gay, R.L.; Grantham, L.F.

    1987-08-25

    A method is described for obtaining magnesium sulfate substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7,000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is then contacted with a concentrated sulfuric acid under certain prescribed conditions to produce a liquid product and a solid product. The particulate solid product and a minor amount of the liquid is then treated to produce a solid residue consisting essentially of magnesium sulfate substantially free of uranium and having a residual radioactivity level of less than 1,000 pCi/gm. In accordance with the preferred embodiment of the invention, a catalyst and an oxidizing agent are used during the initial acid treatment and a final solid residue has a radioactivity level of less than about 50 pCi/gm.

  19. Substrate and method for the formation of continuous magnesium diboride and doped magnesium diboride wire

    DOEpatents

    Suplinskas, Raymond J.; Finnemore, Douglas; Bud'ko, Serquei; Canfield, Paul

    2007-11-13

    A chemically doped boron coating is applied by chemical vapor deposition to a silicon carbide fiber and the coated fiber then is exposed to magnesium vapor to convert the doped boron to doped magnesium diboride and a resultant superconductor.

  20. Method for removing magnesium from aluminum-magnesium alloys with engineered scavenger compound

    SciTech Connect

    Riley, W.D.; Jong, B.W.

    1994-12-31

    The invention relates to a method for removal and production of high purity magnesium from aluminum-magnesium alloys using an engineered scanvenger compound. In particular, the invention relates to a method for removal and production of high purity magnesium from aluminum-magnesium alloys using the engineered scanvenger compound (ESC) lithium titanate (Li2O3TiO2). The removal of magnesium from the aluminum-magnesium alloys is performed at about 600-750 C in a molten salt bath of KCl or KCl-MgCl2 using lithium titanate (Li2O3TiO2) as the engineered scavenger compound (ESC). Electrode deposition of magnesium from the loaded ESC onto a stainless steel electrode is accomplished in a second step, and provides a clean magnesium electrode deposit for recycling. The second step also prepares the ESC for reuse.

  1. Lightweight Heat Pipes Made from Magnesium

    NASA Technical Reports Server (NTRS)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  2. Measurement of atomic number and mass attenuation coefficient in magnesium ferrite

    NASA Astrophysics Data System (ADS)

    Kadam, R. H.; Alone, S. T.; Bichile, G. K.; Jadhav, K. M.

    2007-05-01

    Pure magnesium ferrite sample was prepared by standard ceramic technique and characterized by X-ray diffraction method. XRD pattern revealed that the sample possess single-phase cubic spinel structure. The linear attenuation coefficient (μ), mass attenuation coefficient (μ/ρ), total atomic cross-section (σ_{tot}), total electronic cross-section (σ_{ele}) and the effective atomic number (Z_{eff}) were calculated for pure magnesium ferrite (MgFe_{2}O_{4}). The values of γ-ray mass attenuation coefficient were obtained using a NaI energy selective scintillation counter with radioactive γ-ray sources having energy 0.36, 0.511, 0.662, 1.17 and 1.28 MeV. The experimentally obtained values of μ/ρ and Z_{eff} agreed fairly well with those obtained theoretically.

  3. Wood ash as a magnesium source for phosphorus recovery from source-separated urine.

    PubMed

    Sakthivel, S Ramesh; Tilley, Elizabeth; Udert, Kai M

    2012-03-01

    Struvite precipitation is a simple technology for phosphorus recovery from source-separated urine. However, production costs can be high if expensive magnesium salts are used as precipitants. Therefore, waste products can be interesting alternatives to industrially-produced magnesium salts. We investigated the technical and financial feasibility of wood ash as a magnesium source in India. In batch experiments with source-separated urine, we could precipitate 99% of the phosphate with a magnesium dosage of 2.7 mol Mg mol P(-1). The availability of the magnesium from the wood ash used in our experiment was only about 50% but this could be increased by burning the wood at temperatures well above 600 °C. Depending on the wood ash used, the precipitate can contain high concentrations of heavy metals. This could be problematic if the precipitate were used as fertilizer depending on the applicable fertilizer regulations. The financial study revealed that wood ash is considerably cheaper than industrially-produced magnesium sources and even cheaper than bittern. However, the solid precipitated with wood ash is not pure struvite. Due to the high calcite and the low phosphorus content (3%), the precipitate would be better used as a phosphorus-enhanced conditioner for acidic soils. The estimated fertilizer value of the precipitate was actually slightly lower than wood ash, because 60% of the potassium dissolved into solution during precipitation and was not present in the final product. From a financial point of view and due to the high heavy metal content, wood ash is not a very suitable precipitant for struvite production. Phosphate precipitation from urine with wood ash can be useful if (1) a strong need for a soil conditioner that also contains phosphate exists, (2) potassium is abundant in the soil and (3) no other cheap precipitant, such as bittern or magnesium oxide, is available. PMID:22297249

  4. IMPROVED MAGNESIUM OXIDE SLIP CASTING METHOD

    DOEpatents

    Stoddard, S.D.; Nuckolls, D.E.

    1963-12-31

    A process for making an aqueous magnesium oxide slip casting slurry comprising the steps of mixing finely ground fused magnesium oxide with water, milling the slurry for at least 30 hours at a temperature of 2-10 deg C (the low temperature during milling inhibiting the formation of hydrated magnesium oxide), discharging the slurry from the mill, adding hydrochloric acid as a deflocculent, and adding a scum inhibitor is presented. (AEC)

  5. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium carbonate. 184.1425 Section 184.1425... Listing of Specific Substances Affirmed as GRAS § 184.1425 Magnesium carbonate. (a) Magnesium carbonate (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as...

  6. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium carbonate. 184.1425 Section 184.1425... Listing of Specific Substances Affirmed as GRAS § 184.1425 Magnesium carbonate. (a) Magnesium carbonate (molecular formula approximately (MgCO3)4·Mg(OH)2·5H2O, CAS Reg. No. 39409-82-0) is also known as...

  7. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  8. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  9. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  10. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  11. 21 CFR 862.1495 - Magnesium test system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... magnesium levels in serum and plasma. Magnesium measurements are used in the diagnosis and treatment of hypomagnesemia (abnormally low plasma levels of magnesium) and hypermagnesemia (abnormally high plasma levels...

  12. Inverse Slip Accompanying Twinning and Detwinning during Cyclic Loading of Magnesium Single Crystal

    DOE PAGESBeta

    Yu, Qin; Wang, Jian; Jiang, Yanyao

    2013-01-01

    In situ , observation of twinning and detwinning in magnesium single crystals during tension-compression cyclic loading was made using optical microscopy. A quantitative analysis of plastic strain indicates that twinning and detwinning experience two stages, low and high work hardening de-twinning, and pure re-twinning and fresh twinning combined with retwinning. Slip is always activated. For the first time, inverse slip accompanying with pure retwinning and high work hardening detwinning was experimentally identified, which provides insights in better understanding of the activity of twining, detwinning, and slips.

  13. Turbulence in pure superfluid flow

    SciTech Connect

    Ashton, R.A.; Opatowsky, L.B.; Tough, J.T.

    1981-03-09

    A series of experiments is described which provide an unambiguous description of the steady-state properties of turbulence in pure superfluid flow. The turbulence is qualitatively different from that observed in counterflow but comparable to the homogeneous turbulence described by theory.

  14. Production of substantially pure fructose

    DOEpatents

    Hatcher, Herbert J.; Gallian, John J.; Leeper, Stephen A.

    1990-01-01

    A process is disclosed for the production of substantially pure fructose from sucrose-containing substrates. The process comprises converting the sucrose to levan and glucose, purifying the levan by membrane technology, hydrolyzing the levan to form fructose monomers, and recovering the fructose.

  15. The TMS Magnesium Committee: Committed to the Advancement of Global Magnesium Technology

    SciTech Connect

    Sillekens, Wim H.; Nyberg, Eric A.

    2011-04-21

    The TMS Magnesium Committee was established in the year 2000 as a spin-off of the Reactive Metals Committee, triggered by the strong global growth of magnesium being used in a variety of structural lightweight applications since the mid-1990’s. Since then the committee has seen a distinct development in terms of size, participation and focus. The article at hand outlines this development by recapitulating the output of its two main activities: the annual Magnesium Technology Symposia and the JOM Special Issues dedicated to magnesium research and development. Further records on the Magnesium Committee are available from the committee homepage (accessible through http://members.tms.org).

  16. Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium

    SciTech Connect

    Mola, Renata

    2013-04-15

    Al/Zn-enriched surface layers were fabricated by heating Mg specimens in contact with Al–Zn powder mixtures in a vacuum furnace at 445 °C. The layer formation process took place through partial melting at the Mg-substrate/powder-mixture interface. Heating times ranged from 20 to 80 min. The layer microstructure and composition were analyzed by optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The layers were 100–900 μm in thickness, depending on the treatment time. The examination results revealed that the layers consisted of Mg{sub 17}(Al,Zn){sub 12} and Mg{sub 5}Al{sub 2}Zn{sub 2} intermetallic phases and a solid solution of Al and Zn in Mg. Between the Al/Zn-enriched layer and the Mg substrate, there was a transition zone of a solid solution of Al and Zn in Mg with a thickness of 20–30 μm. The layers had much higher microhardness than the Mg substrate. - Highlights: ► The layers were produced by heating Mg in contact with an Al–Zn powder mixture. ► The layer formation process at 445 °C proceeded with the liquid phase contribution. ► The Al/Zn-enriched layers were thick, dense, uniform and continuous. ► The layers contained Mg–Al–Zn intermetallic phases. ► The hardness of the layers was much higher than that of the Mg substrate.

  17. Photoelastic properties of magnesium fluoride

    SciTech Connect

    Chung, S.; Carleton, H.R.

    1980-05-01

    Magnesium fluoride (MgF/sub 2/) has the rutile crystal structure with a tetragonal space lattice (P4/mnm). The crystal is uniaxial positive with n/sub omega/ = 1.378 and n/sub epsilon/ = 1.390 for sodium D light. A single crystal of MgF/sub 2/ grown by the Materials Research Corporation was used in this study. The crystal was approximately 1 cm/sup 3/ with polished faces in the (001), (110), and (anti 110) crystal planes as verified by the back-reflection Laue method. Sample preparations and measurements are described.

  18. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1443 Magnesium sulfate. (a)...

  19. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a)...

  20. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium hydroxide. 184.1428 Section 184.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1428 Magnesium hydroxide....

  1. 21 CFR 582.1431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium oxide. 582.1431 Section 582.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Purpose Food Additives § 582.1431 Magnesium oxide. (a)...

  2. 21 CFR 582.5431 - Magnesium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Magnesium oxide. 582.5431 Section 582.5431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients and/or Dietary Supplements 1 § 582.5431 Magnesium oxide. (a)...

  3. Nanostructured magnesium increases bone cell density

    NASA Astrophysics Data System (ADS)

    Weng, Lucy; Webster, Thomas J.

    2012-12-01

    Magnesium has attracted some attention in orthopedics due to its biodegradability and mechanical properties. Since magnesium is an essential natural mineral for bone growth, it can be expected that as a biomaterial, it would support bone formation. However, upon degradation in the body, magnesium releases OH- which results in an alkaline pH that can be detrimental to cell density (for example, osteoblasts or bone forming cells). For this reason, modification of magnesium may be necessary to compensate for such detrimental effects to cells. This study created biologically inspired nanoscale surface features on magnesium by soaking magnesium in various concentrations of NaOH (from 1 to 10 N) and for various periods of time (from 10 to 30 min). The results provided the first evidence of increased roughness, surface energy, and consequently greater osteoblast adhesion, after 4 h as well as density up to 7 days on magnesium treated with any concentration of NaOH for any length of time compared to untreated controls. For these reasons, this study suggests that soaking magnesium in NaOH could be an inexpensive, simple and effective manner to promote osteoblast functions for numerous orthopedic applications and, thus, should be further studied.

  4. Surface Analytical Methods Applied to Magnesium Corrosion.

    PubMed

    Dauphin-Ducharme, Philippe; Mauzeroll, Janine

    2015-08-01

    Understanding magnesium alloy corrosion is of primary concern, and scanning probe techniques are becoming key analytical characterization methods for that purpose. This Feature presents recent trends in this field as the progressive substitution of steel and aluminum car components by magnesium alloys to reduce the overall weight of vehicles is an irreversible trend. PMID:25826577

  5. 21 CFR 182.2437 - Magnesium silicate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Magnesium silicate. 182.2437 Section 182.2437 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Anticaking Agents § 182.2437 Magnesium silicate. (a) Product....

  6. Imparting passivity to vapor deposited magnesium alloys

    NASA Astrophysics Data System (ADS)

    Wolfe, Ryan C.

    Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

  7. Imparting passivity to vapor deposited magnesium alloys

    NASA Astrophysics Data System (ADS)

    Wolfe, Ryan C.

    Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

  8. Canonical Thermal Pure Quantum State

    NASA Astrophysics Data System (ADS)

    Sugiura, Sho; Shimizu, Akira

    2013-07-01

    A thermal equilibrium state of a quantum many-body system can be represented by a typical pure state, which we call a thermal pure quantum (TPQ) state. We construct the canonical TPQ state, which corresponds to the canonical ensemble of the conventional statistical mechanics. It is related to the microcanonical TPQ state, which corresponds to the microcanonical ensemble, by simple analytic transformations. Both TPQ states give identical thermodynamic results, if both ensembles do, in the thermodynamic limit. The TPQ states corresponding to other ensembles can also be constructed. We have thus established the TPQ formulation of statistical mechanics, according to which all quantities of statistical-mechanical interest are obtained from a single realization of any TPQ state. We also show that it has great advantages in practical applications. As an illustration, we study the spin-1/2 kagome Heisenberg antiferromagnet.

  9. Tape casting of magnesium oxide.

    SciTech Connect

    Ayala, Alicia; Corral, Erica L.; Loehman, Ronald E.; Bencoe, Denise Nora; Reiterer, Markus; Shah, Raja A.

    2008-02-01

    A tape casting procedure for fabricating ceramic magnesium oxide tapes has been developed as a method to produce flat sheets of sintered MgO that are thin and porous. Thickness of single layer tapes is in the range of 200-400 {micro}m with corresponding surface roughness values in the range of 10-20 {micro}m as measured by laser profilometry. Development of the tape casting technique required optimization of pretreatment for the starting magnesium oxide (MgO) powder as well as a detailed study of the casting slurry preparation and subsequent heat treatments for sintering and final tape flattening. Milling time of the ceramic powder, plasticizer, and binder mixture was identified as a primary factor affecting surface morphology of the tapes. In general, longer milling times resulted in green tapes with a noticeably smoother surface. This work demonstrates that meticulous control of the entire tape casting operation is necessary to obtain high-quality MgO tapes.

  10. Development of hierarchical magnesium composites using hybrid microwave sintering.

    PubMed

    Habibi, Meisam Kouhi; Joshi, Shailendra P; Gupta, Manoj

    2011-01-01

    In this work, hierarchical magnesium based composites with a micro-architecture comprising reinforcing constituent that is a composite in itself were fabricated using powder metallurgy route including microwave assisted rapid sintering technique and hot extrusion. Different level-I composite particles comprises sub-micron pure aluminum (Al) matrix containing Al2O3 particles of different length scale (from micrometer to nanometer size). Microstructural characterization of the hierarchical composites revealed reasonably uniform distribution of level-I composite particles and significant grain refinement compared to monolithic Mg. Hierarchical composite configurations exhibited different mechanical performance as a function of Al2O3 length scale. Among the different hierarchical formulations synthesized, the hierarchical configuration with level-I composition comprising Al and nano-Al2O3 (0.05 microm) exhibited the highest improvement in tensile yield strength (0.2% YS), ultimate tensile strength (UTS), tensile failure strain (FS), compressive yield strength (0.2% CYS) and ultimate compressive strength (UCS) (+96%, +80%, +42%, +80%, and +83%) as compared to monolithic Mg. An attempt has been made in the present study to correlate the effect of different length scales of Al2O3 particulates on the microstructural and mechanical response of magnesium. PMID:24427874

  11. Design of experimentation with a platinum-magnesium bioelectric battery.

    PubMed

    Fontenier, G; Freschard, R; Mourot, M

    1975-01-01

    The utilization of metal electrodes in the fabrication of a bioelectric battery has been the subject of intensive study for several years. Up to this date, subcutaneous cathodes of black platinum or of silver-silver chloride have been used in conjunction with anodes of aluminum or zinc. The subcutaneous black platinum is not reliable as a function of time due to the growth of overlying heterogeneous tissues. The utilization of a smooth platinum cathode in the right endoauricular position allows good reliability with time, but does not allow using a large surface area. Furthermore we have a reduction of the H-+ ions and not of the oxygen. A pure Domal magnesium anode was utilized with this cathode, which seemed to be a good compromise between to battery's voltage, its lifetime, and its lack of toxicity to body tissues. PMID:1139023

  12. Synthesis and optical study of barium magnesium aluminate blue phosphors

    NASA Astrophysics Data System (ADS)

    Jeet, Suninder; Sharma, Manoj; Pandey, O. P.

    2015-05-01

    Europium doped barium magnesium aluminate (BaMgAl10O17:Eu2+) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl10O17(JCPDS 26-0163) along with an additional phase BaAl2O4(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f6 5d → 4f7 transition of Eu2+ which lies in the blue region of the visible spectrum.

  13. Synthesis and optical study of barium magnesium aluminate blue phosphors

    SciTech Connect

    Jeet, Suninder Pandey, O. P.; Sharma, Manoj

    2015-05-15

    Europium doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl{sub 10}O{sub 17}(JCPDS 26-0163) along with an additional phase BaAl{sub 2}O{sub 4}(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f{sup 6} 5d → 4f{sup 7} transition of Eu{sup 2+} which lies in the blue region of the visible spectrum.

  14. Magnesium bicarbonate as an in situ uranium lixiviant

    SciTech Connect

    Sibert, J.W.

    1984-09-25

    In the subsurface solution mining of mineral values, especially uranium, in situ, magnesium bicarbonate leaching solution is used instead of sodium, potassium and ammonium carbonate and bicarbonates. The magnesium bicarbonate solution is formed by combining carbon dioxide with magnesium oxide and water. The magnesium bicarbonate lixivant has four major advantages over prior art sodium, potassium and ammonium bicarbonates.

  15. Monitoring Biodegradation of Magnesium Implants with Sensors

    NASA Astrophysics Data System (ADS)

    Zhao, Daoli; Wang, Tingting; Guo, Xuefei; Kuhlmann, Julia; Doepke, Amos; Dong, Zhongyun; Shanov, Vesselin N.; Heineman, William R.

    2016-04-01

    Magnesium and its alloys exhibit properties such as high strength, light weight, and in vivo corrosion that make them promising candidates for the development of biodegradable metallic implant materials for bone repair, stents and other medical applications. Sensors have been used to monitor the corrosion of magnesium and its alloys by measuring the concentrations of the following corrosion products: magnesium ions, hydroxyl ions and hydrogen gas. The corrosion characterization system with home-made capillary pH and Mg2+ microsensors has been developed for real-time detection of magnesium corrosion in vitro. A hydrogen gas sensor was used to monitor the corrosion of magnesium by measuring the concentration of the hydrogen gas reaction product in vivo. The high permeability of hydrogen through skin allows transdermal monitoring of the biodegradation of a magnesium alloy implanted beneath the skin by detecting hydrogen gas at the skin surface. The sensor was used to map hydrogen concentration in the vicinity of an implanted magnesium alloy.

  16. Magnesium based degradable biomaterials: A review

    NASA Astrophysics Data System (ADS)

    Gu, Xue-Nan; Li, Shuang-Shuang; Li, Xiao-Ming; Fan, Yu-Bo

    2014-09-01

    Magnesium has been suggested as a revolutionary biodegradable metal for biomedical applications. The corrosion of magnesium, however, is too rapid to match the rates of tissue healing and, additionally, exhibits the localized corrosion mechanism. Thus it is necessary to control the corrosion behaviors of magnesium for their practical use. This paper comprehensively reviews the research progress on the development of representative magnesium based alloys, including Mg-Ca, Mg-Sr, Mg-Zn and Mg-REE alloy systems as well as the bulk metallic glass. The influence of alloying element on their microstructures, mechanical properties and corrosion behaviors is summarized. The mechanical and corrosion properties of wrought magnesium alloys are also discussed in comparison with those of cast alloys. Furthermore, this review also covers research carried out in the field of the degradable coatings on magnesium alloys for biomedical applications. Calcium phosphate and biodegradable polymer coatings are discussed based on different preparation techniques used. We also compare the effect of different coatings on the corrosion behaviors of magnesium alloys substrate.

  17. pureS2HAT: S 2HAT-based Pure E/B Harmonic Transforms

    NASA Astrophysics Data System (ADS)

    Grain, J.; Stompor, R.; Tristram, M.

    2011-10-01

    The pS2HAT routines allow efficient, parallel calculation of the so-called 'pure' polarized multipoles. The computed multipole coefficients are equal to the standard pseudo-multipoles calculated for the apodized sky maps of the Stokes parameters Q and U subsequently corrected by so-called counterterms. If the applied apodizations fullfill certain boundary conditions, these multipoles correspond to the pure multipoles. Pure multipoles of one type, i.e., either E or B, are ensured not to contain contributions from the other one, at least to within numerical artifacts. They can be therefore further used in the estimation of the sky power spectra via the pseudo power spectrum technique, which has to however correctly account for the applied apodization on the one hand, and the presence of the counterterms, on the other. In addition, the package contains the routines permitting calculation of the spin-weighted apodizations, given an input scalar, i.e., spin-0 window. The former are needed to compute the counterterms. It also provides routines for maps and window manipulations. The routines are written in C and based on the S2HAT library, which is used to perform all required spherical harmonic transforms as well as all inter-processor communication. They are therefore parallelized using MPI and follow the distributed-memory computational model. The data distribution patterns, pixelization choices, conventions etc are all as those assumed/allowed by the S2HAT library.

  18. Magnesium doping of boron nitride nanotubes

    DOEpatents

    Legg, Robert; Jordan, Kevin

    2015-06-16

    A method to fabricate boron nitride nanotubes incorporating magnesium diboride in their structure. In a first embodiment, magnesium wire is introduced into a reaction feed bundle during a BNNT fabrication process. In a second embodiment, magnesium in powder form is mixed into a nitrogen gas flow during the BNNT fabrication process. MgB.sub.2 yarn may be used for superconducting applications and, in that capacity, has considerably less susceptibility to stress and has considerably better thermal conductivity than these conventional materials when compared to both conventional low and high temperature superconducting materials.

  19. How pure are your vesicles?

    PubMed

    Webber, Jason; Clayton, Aled

    2013-01-01

    We propose a straightforward method to estimate the purity of vesicle preparations by comparing the ratio of nano-vesicle counts to protein concentration, using tools such as the increasingly available NanoSight platform and a colorimetric protein assay such as the BCA-assay. Such an approach is simple enough to apply to every vesicle preparation within a given laboratory, assisting researchers as a routine quality control step. Also, the approach may aid in comparing/standardising vesicle purity across diverse studies, and may be of particular importance in evaluating vesicular biomarkers. We herein propose some criteria to aid in the definition of pure vesicles. PMID:24009896

  20. Production of substantially pure fructose

    SciTech Connect

    Hatcher, H.J.; Gallian, J.J.; Leeper, S.A.

    1990-05-22

    This patent describes a process for the production of a substantially pure product containing greater than 60% fructose. It comprises: combining a sucrose-containing substrate with effective amounts of a levansucrase enzyme preparation to form levan and glucose; purifying the levan by at least one of the following purification methods: ultrafiltration, diafiltration, hyperfiltration, reverse osmosis, liquid--liquid partition, solvent extraction, chromatography, and precipitation; hydrolyzing the levan to form fructose substantially free of glucose and sucrose; and recovering the fructose by at least one of the following recovery methods: hyperfiltration, reverse osmosis, evaporation, drying, crystallization, and chromatography.

  1. Synthesis of Enantiomerically Pure Anthracyclinones

    NASA Astrophysics Data System (ADS)

    Achmatowicz, Osman; Szechner, Barbara

    The anthracycline antibiotics are among the most important clinical drugs used in the treatment of human cancer. The search for new agents with improved therapeutic efficacy and reduced cardiotoxicity stimulated considerable efforts in the synthesis of new analogues. Since the biological activity of anthracyclines depends on their natural absolute configuration, various strategies for the synthesis of enantiomerically pure anthracyclinones (aglycones) have been developed. They comprise: resolution of racemic intermediate, incorporation of a chiral fragment derived from natural and non-natural chiral pools, asymmetric synthesis with the use of a chiral auxiliary or a chiral reagent, and enantioselective catalysis. Synthetic advances towards enantiopure anthracyclinones reported over the last 17 years are reviewed.

  2. Magnesium-lithium casting alloys

    NASA Technical Reports Server (NTRS)

    Latenko, V. P.; Silchenko, T. V.; Tikhonov, V. A.; Maltsev, V. P.; Korablin, V. P.

    1974-01-01

    The strength properties of magnesium-lithium alloys at room, low, and high temperatures are investigated. It is found that the alloys may have practical application at ambient temperatures up to 100 C, that negative temperatures have a favorable influence on the alloy strength, and that cyclic temperature variations have practically no effect on the strength characteristics. The influence of chemical coatings on corrosion resistance of the MgLi alloys is examined. Several facilities based on pressure casting machines, low-pressure casting machines, and magnetodynamic pumps were designed for producing MgLi alloy castings. Results were obtained for MgLi alloys reinforced with fibers having a volumetric content of 15%.

  3. Boron Clusters as Highly Stable Magnesium-Battery Electrolytes**

    PubMed Central

    Carter, Tyler J; Mohtadi, Rana; Arthur, Timothy S; Mizuno, Fuminori; Zhang, Ruigang; Shirai, Soichi; Kampf, Jeff W

    2014-01-01

    Boron clusters are proposed as a new concept for the design of magnesium-battery electrolytes that are magnesium-battery-compatible, highly stable, and noncorrosive. A novel carborane-based electrolyte incorporating an unprecedented magnesium-centered complex anion is reported and shown to perform well as a magnesium-battery electrolyte. This finding opens a new approach towards the design of electrolytes whose likelihood of meeting the challenging design targets for magnesium-battery electrolytes is very high. PMID:24519845

  4. Boron clusters as highly stable magnesium-battery electrolytes.

    PubMed

    Carter, Tyler J; Mohtadi, Rana; Arthur, Timothy S; Mizuno, Fuminori; Zhang, Ruigang; Shirai, Soichi; Kampf, Jeff W

    2014-03-17

    Boron clusters are proposed as a new concept for the design of magnesium-battery electrolytes that are magnesium-battery-compatible, highly stable, and noncorrosive. A novel carborane-based electrolyte incorporating an unprecedented magnesium-centered complex anion is reported and shown to perform well as a magnesium-battery electrolyte. This finding opens a new approach towards the design of electrolytes whose likelihood of meeting the challenging design targets for magnesium-battery electrolytes is very high. PMID:24519845

  5. Characteristics of aluminum and magnesium based nanocomposites processed using hybrid microwave sintering.

    PubMed

    Eugene, Wong Wai Leong; Gupta, Manoj

    2010-01-01

    Powder metallurgy is one of the highly established methods to synthesize metals, alloys and composites. Sintering is one of the important steps in powder metallurgy methodology and is usually realized through conventional resistance furnaces. The sintering usually takes a few hours to realize density in excess of 90%. The present study highlights the use of energy efficient and environment friendly microwave sintering route to synthesize pure aluminum, magnesium and magnesium based nanocomposites. Three reinforcements were targeted: a) silicon carbide, a microwave susceptor, b) alumina, a microwave transparent material and c) copper, a conducting material. Composites were prepared using blend - compact - microwave sintering - extrusion methodology. Process evaluation revealed that microwave assisted sintering can lead to a reduction of 86% in sintering time and energy savings of 96% when compared to conventional sintering. Moreover, microwave assisted sintering of metal compacts in this study was carried out in air, in the absence of any protective atmosphere, without compromising the mechanical properties of the materials. Results revealed that properties of magnesium can be convincingly enhanced using the said processing methodology and the materials formulations selected. Most importantly, the study established the viability of microwave sintering approach used in place of conventional sintering for magnesium based formulations. PMID:21721326

  6. Corrosion resistance of aluminum-magnesium alloys in glacial acetic acid

    SciTech Connect

    Zaitseva, L.V.; Romaniv, V.I.

    1984-05-01

    Vessels for the storage and conveyance of glacial acetic acid are produced from ADO and AD1 aluminum, which are distinguished by corrosion resistance, weldability and workability in the hot and cold conditions but have low tensile strength. Aluminum-magnesium alloys are stronger materials close in corrosion resistance to technical purity aluminum. An investigation was made of the basic alloying components on the corrosion resistance of these alloys in glacial acetic acid. Both the base metal and the weld joints were tested. With an increase in temperature the corrosion rate of all of the tested materials increases by tens of times. The metals with higher magnesium content show more pitting damage. The relationship of the corrosion resistance of the alloys to magnesium content is confirmed by the similar intensity of failure of the joint metal of all of the investigated alloys and by electrochemical investigations. The data shows that AMg3 alloy is close to technically pure ADO aluminum. However, the susceptibility of even this material to local corrosion eliminates the possibility of the use of aluminum-magnesium alloys as reliable constructional materials in glacial acetic acid.

  7. Thermodynamic properties of calcium-magnesium alloys determined by emf measurements

    SciTech Connect

    Newhouse, JM; Poizeau, S; Kim, H; Spatocco, BL; Sadoway, DR

    2013-02-28

    The thermodynamic properties of calcium-magnesium alloys were determined by electromotive force (emf) measurements using a Ca(in Bi)vertical bar CaF2 vertical bar Ca(in Mg) cell over the temperature range 713-1048 K. The activity and partial molar Gibbs free energy of calcium in magnesium were calculated for nine Ca-Mg alloys, calcium mole fractions varying from x(ca) = 0.01 to 0.80. Thermodynamic properties of magnesium in calcium and the molar Gibbs free energy of mixing were estimated using the Gibbs-Duhem relationship. In the all-liquid region at 1010 K, the activity of calcium in magnesium was found to range between 8.8 x 10(-4) and 0.94 versus pure calcium. The molecular interaction volume model (MIVM) was used to model the activity coefficient of Ca and Mg in Ca-Mg liquid alloys. Based on this work, Ca-Mg alloys show promise as the negative electrode of a liquid metal battery in which calcium is the itinerant species: alloying with Mg results in both a decrease in operating temperature and suppression of Ca metal solubility in the molten salt electrolyte. (C) 2012 Elsevier Ltd. All rights reserved.

  8. Effect of solute atoms on grain boundary sliding in magnesium alloys

    NASA Astrophysics Data System (ADS)

    Somekawa, Hidetoshi; Watanabe, Hiroyuki; Mukai, Toshiji

    2014-04-01

    The effect of solid-solution alloying on grain boundary sliding (GBS) was investigated using pure magnesium and six kinds of Mg-X (X = Ag, Al, Li, Pb, Y and Zn) dilute binary solid solutions with an average grain size of 10 µm. A sharp increase in damping capacity caused by GBS was observed above a certain temperature. The temperature at which a sharp increase in damping capacity occurred depended on the alloying element. The addition of Y and Ag markedly increased the onset temperature (more than 100 K) for a sharp increase in damping capacity, whereas the addition of Zn, Al and Li slightly increased the onset temperature (less than 50 K) as compared with that for pure magnesium. Tensile tests at a temperature of 423 K revealed that the higher the onset temperature, the lower the strain rate sensitivity of the flow stress. It is suggested that the former elements (Y and Ag) are more effective in suppressing GBS in magnesium alloys than the latter ones (Zn, Al and Li). The suppression of GBS was associated with low grain boundary energy, and the extent to which the energy is reduced depended on the alloying element. It was suggested that the change in the lattice parameter (the so-called c/a ratio) affects the grain boundary energy, and thus, the occurrence of GBS.

  9. Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: a general review.

    PubMed

    Wang, Jiali; Tang, Jian; Zhang, Peng; Li, Yangde; Wang, Jue; Lai, Yuxiao; Qin, Ling

    2012-08-01

    As a bioabsorbable metal with mechanical properties close to bone, pure magnesium or its alloys have great potential to be developed as medical implants for clinical applications. However, great efforts should be made to avoid its fast degradation in vivo for orthopedic applications when used for fracture fixation. Therefore, how to decease degradation rate of pure magnesium or its alloys is one of the focuses in Research and Development (R&D) of medical implants. It has been recognized that surface modification is an effective method to prevent its initial degradation in vivo to maintain its desired mechanical strength. This article reviews the recent progress in surface modifications for prevention of fast degradation of magnesium or its alloys using in vitro testing model, a fast yet relevant model before moving towards time-consuming and expensive in vivo testing. Pros and cons of various surface modifications are also discussed for the goal to design available products to be applied in clinical trials. PMID:22566412

  10. Multiple pure tone noise prediction

    NASA Astrophysics Data System (ADS)

    Han, Fei; Sharma, Anupam; Paliath, Umesh; Shieh, Chingwei

    2014-12-01

    This paper presents a fully numerical method for predicting multiple pure tones, also known as “Buzzsaw” noise. It consists of three steps that account for noise source generation, nonlinear acoustic propagation with hard as well as lined walls inside the nacelle, and linear acoustic propagation outside the engine. Noise generation is modeled by steady, part-annulus computational fluid dynamics (CFD) simulations. A linear superposition algorithm is used to construct full-annulus shock/pressure pattern just upstream of the fan from part-annulus CFD results. Nonlinear wave propagation is carried out inside the duct using a pseudo-two-dimensional solution of Burgers' equation. Scattering from nacelle lip as well as radiation to farfield is performed using the commercial solver ACTRAN/TM. The proposed prediction process is verified by comparing against full-annulus CFD simulations as well as against static engine test data for a typical high bypass ratio aircraft engine with hardwall as well as lined inlets. Comparisons are drawn against nacelle unsteady pressure transducer measurements at two axial locations as well as against near- and far-field microphone array measurements outside the duct. This is the first fully numerical approach (no experimental or empirical input is required) to predict multiple pure tone noise generation, in-duct propagation and far-field radiation. It uses measured blade coordinates to calculate MPT noise.

  11. Severe hyperkalaemia peripartum with magnesium sulphate

    PubMed Central

    Morton, Adam

    2012-01-01

    A case of severe hyperkalaemia peripartum in the setting of magnesium sulphate infusion is presented. Health professionals involved in the care of high-risk pregnancies should be aware of this rare association.

  12. The USAMP magnesium powertrain cast components project

    NASA Astrophysics Data System (ADS)

    Powell, Bob R.

    2002-02-01

    Despite the demonstrated ability of magnesium alloys to significantly reduce weight at acceptable costs in many areas of an automobile, powertrain components have not benefited from this metal, primarily because the high-temperature alloys that are required for engines and transmissions are too expensive. However, the U.S. Department of Energy and the U.S. Automotive Materials Partnership have launched a project to evaluate several new, potentially low-cost magnesium alloys, design several pre-competitive power-train components for the best alloy properties, cast and dynamometer or vehicle test the components in assembled powertrains, develop a powertrain magnesium alloy design database and common alloy specification, and identify andpromote the funding of fundamental research into improved magnesium alloys and casting processes.

  13. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 179, which is incorporated by reference. Magnesium phosphate, tribasic, meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 180, which...

  14. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 179, which is incorporated by reference. Magnesium phosphate, tribasic, meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 180, which...

  15. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... phosphoric acid. (b) Magnesium phosphate, dibasic, meets the specifications of the Food Chemicals Codex, 3d... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 180, which is incorporated by reference. Copies...

  16. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 179, which is incorporated by reference. Magnesium phosphate, tribasic, meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 180, which...

  17. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  18. Hydrogen in magnesium palladium thin layer structures

    NASA Astrophysics Data System (ADS)

    Kruijtzer, G. L.

    2008-02-01

    In this thesis, the study of hydrogen storage, absorption and desorption in magnesium layers is described. The magnesium layers have a thickness of 50-500 nm and are covered by a palladium layer which acts as a hydrogen dissociation/association catalyst. The study was preformed under ultra high vacuum conditions to avoid oxygen contamination. The main analysis techniques were RBS, ERD and TDS.

  19. Enhancing overall tensile and compressive response of pure Mg using nano-TiB{sub 2} particulates

    SciTech Connect

    Meenashisundaram, Ganesh Kumar; Seetharaman, Sankaranarayanan; Gupta, Manoj

    2014-08-15

    A novel attempt is made to synthesize and study the isolated effects of less than two volume fraction TiB{sub 2} nanoparticulates (60 nm) on pure magnesium. New light weight Mg–TiB{sub 2} nanocomposites with superior mechanical properties compared to pure magnesium are synthesized using disintegrated melt deposition technique followed by hot extrusion. The microstructural characterization studies revealed that the samples exhibited fairly uniform distribution of TiB{sub 2} nanoparticulates with minimal porosity and good interfacial integrity between Mg matrix and TiB{sub 2} particulates. The coefficient of thermal expansion results indicates that the addition of 0.58, 0.97, and 1.98 vol.% TiB{sub 2} nanoparticulates marginally improves the dimensional stability of pure magnesium. A significant improvement in the room temperature tensile properties of pure magnesium was observed with the addition of less than two volume fraction TiB{sub 2} nanoparticulates. The synthesized Mg 1.98 vol.% TiB{sub 2} nanocomposite revealed the best room temperature tensile properties with a significant increase in the 0.2% tensile yield strength by ∼ 54%, ultimate tensile strength by ∼ 15% and fracture strain by ∼ 79% when compared to pure Mg. The X-ray diffraction studies indicated changes in the basal plane orientation of pure Mg with the addition of nano-TiB{sub 2} particulates. A maximum tensile fracture strain of ∼ 16% is achieved with the addition of 0.97 vol.% TiB{sub 2}. The room temperature compressive properties of the nanocomposites reveal that the addition of 1.98 TiB{sub 2} increases the 0.2% compressive yield strength of Mg by ∼ 47% and ultimate compressive strength by ∼ 10% with a marginal increase in the fracture strain (∼ 11%). Reduction in tensile–compression yield asymmetry was observed for Mg 0.58 and 0.97 vol.% TiB{sub 2} nanocomposites which can be attributed to the weakening of the strong basal texture of pure Mg. - Highlights: • First attempt

  20. Immunological Response to Biodegradable Magnesium Implants

    NASA Astrophysics Data System (ADS)

    Pichler, Karin; Fischerauer, Stefan; Ferlic, Peter; Martinelli, Elisabeth; Brezinsek, Hans-Peter; Uggowitzer, Peter J.; Löffler, Jörg F.; Weinberg, Annelie-Martina

    2014-04-01

    The use of biodegradable magnesium implants in pediatric trauma surgery would render surgical interventions for implant removal after tissue healing unnecessary, thereby preventing stress to the children and reducing therapy costs. In this study, we report on the immunological response to biodegradable magnesium implants—as an important aspect in evaluating biocompatibility—tested in a growing rat model. The focus of this study was to investigate the response of the innate immune system to either fast or slow degrading magnesium pins, which were implanted into the femoral bones of 5-week-old rats. The main alloying element of the fast-degrading alloy (ZX50) was Zn, while it was Y in the slow-degrading implant (WZ21). Our results demonstrate that degrading magnesium implants beneficially influence the immune system, especially in the first postoperative weeks but also during tissue healing and early bone remodeling. However, rodents with WZ21 pins showed a slightly decreased phagocytic ability during bone remodeling when the degradation rate reached its maximum. This may be due to the high release rate of the rare earth-element yttrium, which is potentially toxic. From our results we conclude that magnesium implants have a beneficial effect on the innate immune system but that there are some concerns regarding the use of yttrium-alloyed magnesium implants, especially in pediatric patients.

  1. Pure optical dynamical color encryption.

    PubMed

    Mosso, Fabian; Tebaldi, Myrian; Barrera, John Fredy; Bolognini, Néstor; Torroba, Roberto

    2011-07-18

    We introduce a way to encrypt-decrypt a color dynamical phenomenon using a pure optical alternative. We split the three basic chromatic channels composing the input, and then each channel is processed through a 4f encoding method and a theta modulation applied to the each encrypted frame in every channel. All frames for a single channel are multiplexed. The same phase mask is used to encode all the information. Unlike the usual procedure we do not multiplex the three chromatic channels into a single encoding media, because we want to decrypt the information in real time. Then, we send to the decoding station the phase mask and the three packages each one containing the multiplexing of a single channel. The end user synchronizes and decodes the information contained in the separate channels. Finally, the decoding information is conveyed together to bring the decoded dynamical color phenomenon in real-time. We present material that supports our concepts. PMID:21934738

  2. Pure optical dynamical color encryption

    NASA Astrophysics Data System (ADS)

    Mosso, Fabian; Tebaldi, Myrian; Fredy Barrera, John; Bolognini, Néstor; Torroba, Roberto

    2011-07-01

    We introduce a way to encrypt-decrypt a color dynamical phenomenon using a pure optical alternative. We split the three basic chromatic channels composing the input, and then each channel is processed through a 4f encoding method and a theta modulation applied to the each encrypted frame in every channel. All frames for a single channel are multiplexed. The same phase mask is used to encode all the information. Unlike the usual procedure we do not multiplex the three chromatic channels into a single encoding media, because we want to decrypt the information in real time. Then, we send to the decoding station the phase mask and the three packages each one containing the multiplexing of a single channel. The end user synchronizes and decodes the information contained in the separate channels. Finally, the decoding information is conveyed together to bring the decoded dynamical color phenomenon in real-time. We present material that supports our concepts.

  3. Magnesium phosphate glass cements with ceramic-type properties

    SciTech Connect

    Sugama, T.; Kukacka, L.E.

    1984-03-13

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate exhibiting rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono-and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  4. Magnesium phosphate glass cements with ceramic-type properties

    DOEpatents

    Sugama, Toshifumi; Kukacka, Lawrence E.

    1984-03-13

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate exhibiting rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono- and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  5. Magnesium-phosphate-glass cements with ceramic-type properties

    DOEpatents

    Sugama, T.; Kukacka, L.E.

    1982-09-23

    Rapid setting magnesium phosphate (Mg glass) cementitious materials consisting of magnesium phosphate cement paste, polyborax and water-saturated aggregate, exhibits rapid setting and high early strength characteristics. The magnesium glass cement is prepared from a cation-leachable powder and a bivalent metallic ion-accepting liquid such as an aqueous solution of diammonium phosphate and ammonium polyphosphate. The cation-leachable powder includes a mixture of two different magnesium oxide powders processed and sized differently which when mixed with the bivalent metallic ion-accepting liquid provides the magnesium glass cement consisting primarily of magnesium ortho phosphate tetrahydrate, with magnesium hydroxide and magnesium ammonium phosphate hexahydrate also present. The polyborax serves as a set-retarder. The resulting magnesium mono- and polyphosphate cements are particularly suitable for use as a cementing matrix in rapid repair systems for deteriorated concrete structures as well as construction materials and surface coatings for fireproof structures.

  6. A hydrous Ca-bearing magnesium carbonate from playa lake sediments, Salines Lake, Spain

    USGS Publications Warehouse

    Queralt, I.; Julia, R.; Plana, F.; Bischoff, J.L.

    1997-01-01

    Sediments of playa Lake Salines, SE, Spain, contain a carbonate mineral characterized by X-ray diffraction peaks very similar to, but systematically shifted from those of pure magnesite. Analyses (SEM, IR and Raman spectroscopy, DTA, TGA, and ICP) indicate the mineral is a hydrous Ca-bearing magnesium carbonate with the chemical formula (Mg0.92,Ca0.08)CO3??3H2O. Thermal characteristics of the mineral are similar to those of other known hydrated magnesium carbonates. X-ray and electron diffraction data suggests a monoclinic system (P21/n space group) with unit-cell parameters of a = 6.063(6), b = 10.668(5), and c = 6.014(4) A?? and ?? = 107.28??.

  7. Synthesis and thermal decomposition behaviors of magnesium borohydride ammoniates with controllable composition as hydrogen storage materials.

    PubMed

    Yang, Yanjing; Liu, Yongfeng; Li, You; Gao, Mingxia; Pan, Hongge

    2013-02-01

    An ammonia-redistribution strategy for synthesizing metal borohydride ammoniates with controllable coordination number of NH(3) was proposed, and a series of magnesium borohydride ammoniates were easily synthesized by a mechanochemical reaction between Mg(BH(4))(2) and its hexaammoniate. A strong dependence of the dehydrogenation temperature and purity of the released hydrogen upon heating on the coordination number of NH(3) was elaborated for Mg(BH(4))(2)·xNH(3) owing to the change in the molar ratio of H(δ+) and H(δ-), the charge distribution on H(δ+) and H(δ-), and the strength of the coordinate bond N:→Mg(2+). The monoammoniate of magnesium borohydride (Mg(BH(4))(2)·NH(3)) was obtained for the first time. It can release 6.5% pure hydrogen within 50 minutes at 180 °C. PMID:23192895

  8. Research of magnesium phosphosilicate cement

    NASA Astrophysics Data System (ADS)

    Ding, Zhu

    Magnesium phosphosilicate cement (MPSC) is a novel phosphate bonded cement, which consists mainly of magnesia, phosphate and silicate minerals. The traditional magnesium phosphate cements (MPCs) usually composed by ammonium phosphate, and gaseous ammonia will emit during mixing and in service. There is no noxious ammonia released from MPSC, furthermore, it can recycle a large volume of the non-hazardous waste. The goal of this research is to investigate the composition, reaction products, reaction mechanism, microstructure, properties, durability and applications of the MPSC. MPSC sets rapidly and has high early strength. It reacts better with solid industrial waste when compared to Portland cement. Many solid industrial wastes, such as fly ash, steel slag, coal gangue, red coal gangue, red mud, barium-bearing slag, copper slag, silica fume, and ground granulated blast furnace slag, have been used as the main component (40% by weight) in MPSC. The research has found that these aluminosilicate (or ironsilicate, or calciumsilicate) minerals with an amorphous or glass structure can enhance the performance of MPSC. The disorganized internal structure of amorphous materials may make it possess higher reactivity compared to the crystalline phases. Chemical reaction between phosphate and these minerals may form an amorphous gel, which is favorable to the cementing. Borax, boric acid and sodium tripolyphosphate have been used as retardants in the MPSC system. It is found that boric acid has a higher retarding effect on the setting of cement, than borax does. However, sodium polyphosphate accelerates the reaction of MPSC. The hydration of MPSC is exothermic reaction. The heat evolution may prompt hydrates formation, and shorten the setting process. Modern materials characterization techniques, XRD, DSC, TG-DTA FTIR, XPS, MAS-NMR, SEM, TEM, MIP, etc. were used to analyze the phase composition, micro morphology, and microstructure of hardened MPSC. The main hydration product

  9. Magnesium isotopic composition of achondrites

    NASA Astrophysics Data System (ADS)

    Sedaghatpour, Fatemeh; Teng, Fang-Zhen

    2016-02-01

    Magnesium isotopic compositions of 22 well-characterized differentiated meteorites including 7 types of achondrites and pallasite meteorites were measured to estimate the average Mg isotopic composition of their parent bodies and evaluate Mg isotopic heterogeneity of the solar system. The δ26Mg values are -0.236‰ and -0.190‰ for acapulcoite-lodranite and angrite meteorites, respectively and vary from -0.267‰ to -0.222‰ in the winonaite-IAB-iron silicate group, -0.369‰ to -0.292‰ in aubrites, -0.269‰ to -0.158‰ in HEDs, -0.299‰ to -0.209‰ in ureilites, -0.307‰ to -0.237‰ in mesosiderites, and -0.303‰ to -0.238‰ in pallasites. Magnesium isotopic compositions of most achondrites and pallasite meteorites analyzed here are similar and reveal no significant isotopic fractionation. However, Mg isotopic compositions of D‧Orbigny (angrite) and some HEDs are slightly heavier than chondrites and the other achondrites studied here. The slightly heavier Mg isotopic compositions of angrites and some HEDs most likely resulted from either impact-induced evaporation or higher abundance of clinopyroxene with the Mg isotopic composition slightly heavier than olivine and orthopyroxene. The average Mg isotopic composition of achondrites (δ26Mg = -0.246 ± 0.082‰, 2SD, n = 22) estimated here is indistinguishable from those of the Earth (δ26Mg = -0.25 ± 0.07‰; 2SD, n = 139), chondrites (δ26Mg = -0.28 ± 0.06‰; 2SD, n = 38), and the Moon (δ26Mg = -0.26 ± 0.16‰; 2SD, n = 47) reported from the same laboratory. The chondritic Mg isotopic composition of achondrites, the Moon, and the Earth further reflects homogeneity of Mg isotopes in the solar system and the lack of Mg isotope fractionation during the planetary accretion process and impact events.

  10. Cytocompatibility of magnesium and AZ31 alloy with three types of cell lines using a direct in vitro method.

    PubMed

    Mochizuki, Akira; Yahata, Chie; Takai, Hung

    2016-09-01

    Magnesium alloys have been investigated by many researchers as a new absorbable biomaterial owing to their excellent degradability with non-maleficence or low-maleficence in living tissues. In the present work, the in vitro cytocompatibility of an Magnesium alloy was investigated by culturing cells directly on it. Investigations were carried out in terms of the cell viability along with the use of scanning electron microscopy to observe its morphology. The cell lines used were derived from fibroblast, endothelial, and smooth muscle cells. Pure magnesium and AZ31 alloy composed of magnesium (96 %), aluminum (3 %), and zinc (1 %) were adopted as models. The viability of cells on the metal samples and on the margin area of a multi-well plate was investigated. For direct culturing on metal, a depression in the viability and morphologically stressed cells were observed. In addition, the cell viability was also depressed for the margin area. To clarify the factors causing the negative effects, the amount of eluted metal ions and pH changes in the medium because of the erosion of the Magnesium samples were investigated, together with the cytotoxicity of sole metal ions corresponding to the composition of the metals. It was found that Mg(2+), Zn(2+), and Al(3+) ions were less toxic at the investigated concentrations, and that these factors will not produce negative effects on cells. Consequently, these factors cannot fully explain the results. PMID:27568216

  11. Decryption of pure-position permutation algorithms.

    PubMed

    Zhao, Xiao-Yu; Chen, Gang; Zhang, Dan; Wang, Xiao-Hong; Dong, Guang-Chang

    2004-07-01

    Pure position permutation image encryption algorithms, commonly used as image encryption investigated in this work are unfortunately frail under known-text attack. In view of the weakness of pure position permutation algorithm, we put forward an effective decryption algorithm for all pure-position permutation algorithms. First, a summary of the pure position permutation image encryption algorithms is given by introducing the concept of ergodic matrices. Then, by using probability theory and algebraic principles, the decryption probability of pure-position permutation algorithms is verified theoretically; and then, by defining the operation system of fuzzy ergodic matrices, we improve a specific decryption algorithm. Finally, some simulation results are shown. PMID:15495308

  12. Production of Magnesium by Vacuum Aluminothermic Reduction with Magnesium Aluminate Spinel as a By-Product

    NASA Astrophysics Data System (ADS)

    Wang, Yaowu; You, Jing; Peng, Jianping; Di, Yuezhong

    2016-03-01

    The Pidgeon process currently accounts for 85% of the world's magnesium production. Although the Pidgeon process has been greatly improved over the past 10 years, such production still consumes much energy and material and creates much pollution. The present study investigates the process of producing magnesium by employing vacuum aluminothermic reduction and by using magnesite as material and obtaining magnesium aluminate spinel as a by-product. The results show that compared with the Pidgeon process, producing magnesium by vacuum aluminothermic reduction can save materials by as much as 50%, increase productivity up to 100%, and save energy by more than 50%. It can also reduce CO2 emission by up to 60% and realize zero discharge of waste residue. Vacuum aluminothermic reduction is a highly efficient, low-energy-consumption, and environmentally friendly method of producing magnesium.

  13. Production of Magnesium by Vacuum Aluminothermic Reduction with Magnesium Aluminate Spinel as a By-Product

    NASA Astrophysics Data System (ADS)

    Wang, Yaowu; You, Jing; Peng, Jianping; Di, Yuezhong

    2016-06-01

    The Pidgeon process currently accounts for 85% of the world's magnesium production. Although the Pidgeon process has been greatly improved over the past 10 years, such production still consumes much energy and material and creates much pollution. The present study investigates the process of producing magnesium by employing vacuum aluminothermic reduction and by using magnesite as material and obtaining magnesium aluminate spinel as a by-product. The results show that compared with the Pidgeon process, producing magnesium by vacuum aluminothermic reduction can save materials by as much as 50%, increase productivity up to 100%, and save energy by more than 50%. It can also reduce CO2 emission by up to 60% and realize zero discharge of waste residue. Vacuum aluminothermic reduction is a highly efficient, low-energy-consumption, and environmentally friendly method of producing magnesium.

  14. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  15. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  16. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies... treatment works from the manufacturing of magnesium anode batteries....

  17. Leaf Senescence by Magnesium Deficiency

    PubMed Central

    Tanoi, Keitaro; Kobayashi, Natsuko I.

    2015-01-01

    Magnesium ions (Mg2+) are the second most abundant cations in living plant cells, and they are involved in various functions, including photosynthesis, enzyme catalysis, and nucleic acid synthesis. Low availability of Mg2+ in an agricultural field leads to a decrease in yield, which follows the appearance of Mg-deficient symptoms such as chlorosis, necrotic spots on the leaves, and droop. During the last decade, a variety of physiological and molecular responses to Mg2+ deficiency that potentially link to leaf senescence have been recognized, allowing us to reconsider the mechanisms of Mg2+ deficiency. This review focuses on the current knowledge about the physiological responses to Mg2+ deficiency including a decline in transpiration, accumulation of sugars and starch in source leaves, change in redox states, increased oxidative stress, metabolite alterations, and a decline in photosynthetic activity. In addition, we refer to the molecular responses that are thought to be related to leaf senescence. With these current data, we give an overview of leaf senescence induced by Mg deficiency. PMID:27135350

  18. Mixtures of maximally entangled pure states

    NASA Astrophysics Data System (ADS)

    Flores, M. M.; Galapon, E. A.

    2016-09-01

    We study the conditions when mixtures of maximally entangled pure states remain entangled. We found that the resulting mixed state remains entangled when the number of entangled pure states to be mixed is less than or equal to the dimension of the pure states. For the latter case of mixing a number of pure states equal to their dimension, we found that the mixed state is entangled provided that the entangled pure states to be mixed are not equally weighted. We also found that one can restrict the set of pure states that one can mix from in order to ensure that the resulting mixed state is genuinely entangled. Also, we demonstrate how these results could be applied as a way to detect entanglement in mixtures of the entangled pure states with noise.

  19. Bringing Planctomycetes into pure culture

    PubMed Central

    Lage, Olga M.; Bondoso, Joana

    2012-01-01

    Planctomycetes have been known since the description of Planctomyces bekefii by Gimesi at the beginning of the twentieth century (1924), although the first axenic cultures were only obtained in the 1970s. Since then, 11 genera with 14 species have been validly named and five candidatus genera belonging to the anaerobic ammonium oxidation, anammox bacteria have also been discovered. However, Planctomycetes diversity is much broader than these numbers indicate, as shown by environmental molecular studies. In recent years, the authors have attempted to isolate and cultivate additional strains of Planctomycetes. This paper provides a summary of the isolation work that was carried out to obtain in pure culture Planctomycetes from several environmental sources. The following strains of planctomycetes have been successfully isolated: two freshwater strains from the sediments of an aquarium, which were described as a new genus and species, Aquisphaera giovannonii; several Rhodopirellula strains from the sediments of a water treatment recycling tank of a marine fish farm; and more than 140 planctomycetes from the biofilm community of macroalgae. This collection comprises several novel taxa that are being characterized and described. Improvements in the isolation methodology were made in order to optimize and enlarge the number of Planctomycetes isolated from the macroalgae. The existence of an intimate and an important relationship between planctomycetes and macroalgae reported before by molecular studies is therefore supported by culture-dependent methods. PMID:23335915

  20. Isomerically Pure Tetramethylrhodamine Voltage Reporters.

    PubMed

    Deal, Parker E; Kulkarni, Rishikesh U; Al-Abdullatif, Sarah H; Miller, Evan W

    2016-07-27

    We present the design, synthesis, and application of a new family of fluorescent voltage indicators based on isomerically pure tetramethylrhodamines. These new Rhodamine Voltage Reporters, or RhoVRs, use photoinduced electron transfer (PeT) as a trigger for voltage sensing, display excitation and emission profiles in the green to orange region of the visible spectrum, demonstrate high sensitivity to membrane potential changes (up to 47% ΔF/F per 100 mV), and employ a tertiary amide derived from sarcosine, which aids in membrane localization and simultaneously simplifies the synthetic route to the voltage sensors. The most sensitive of the RhoVR dyes, RhoVR 1, features a methoxy-substituted diethylaniline donor and phenylenevinylene molecular wire at the 5'-position of the rhodamine aryl ring, exhibits the highest voltage sensitivity to date for red-shifted PeT-based voltage sensors, and is compatible with simultaneous imaging alongside green fluorescent protein-based indicators. The discoveries that sarcosine-based tertiary amides in the context of molecular-wire voltage indicators prevent dye internalization and 5'-substituted voltage indicators exhibit improved voltage sensitivity should be broadly applicable to other types of PeT-based voltage-sensitive fluorophores. PMID:27428174

  1. Magnesium and anabolic hormones in older men

    PubMed Central

    Maggio, M.; Ceda, G. P.; Lauretani, F.; Cattabiani, C.; Avantaggiato, E.; Morganti, S.; Ablondi, F.; Bandinelli, S.; Dominguez, L. J.; Barbagallo, M.; Paolisso, G.; Semba, R. D.; Ferrucci, L.

    2015-01-01

    Summary Optimal nutritional and hormonal statuses are determinants of successful ageing. The age associated decline in anabolic hormones such as testosterone and insulin-like growth factor 1 (IGF-1) is a strong predictor of metabolic syndrome, diabetes and mortality in older men. Studies have shown that magnesium intake affects the secretion of total IGF-1 and increase testosterone bioactivity. This observation suggests that magnesium can be a modulator of the anabolic/catabolic equilibrium disrupted in the elderly people. However, the relationship between magnesium and anabolic hormones in men has not been investigated. We evaluated 399 ≥65-year-old men of CHIANTI in a study population representative of two municipalities of Tuscany (Italy) with complete data on testosterone, total IGF-1, sex hormone binding globulin (SHBG), dehydroepiandrosterone sulphate (DHEAS) and serum magnesium levels. Linear regression models were used to test the relationship between magnesium and testosterone and IGF-1. Mean age of the population was 74.18 ± 6.43 (years ± SD, age range 65.2–92.4). After adjusting for age, magnesium was positively associated with total testosterone (β ± SE, 34.9 ± 10.3; p = 0.001) and with total IGF-1 (β ± SE, 15.9 ± 4.8; p = 0.001). After further adjustment for body mass index (BMI), log (IL-6), log (DHEAS), log (SHBG), log (insulin), total IGF-1, grip strength, Parkinson’s disease and chronic heart failure, the relationship between magnesium and total testosterone remained strong and highly significant (β ± SE, 48.72 ± 12.61; p = 0.001). In the multivariate analysis adjusted for age, BMI, log (IL-6), liver function, energy intake, log (insulin), log (DHEAS), selenium, magnesium levels were also still significantly associated with IGF-1 (β ± SE, 16.43 ± 4.90; p = 0.001) and remained significant after adjusting for total testosterone (β ± SE, 14.4 ± 4.9; p = 0.01). In a cohort of older men, magnesium levels are strongly and

  2. Magnesium deficiency is associated with periodontal disease.

    PubMed

    Meisel, P; Schwahn, C; Luedemann, J; John, U; Kroemer, H K; Kocher, T

    2005-10-01

    In the multifactorial pathogenesis of periodontitis, there are still unknown factors influencing the outcome of the disease. An association between magnesium and periodontitis has been suggested by preliminary studies. However, relevant clinical data are lacking. We investigated the association between magnesium status and periodontal health in a population-based analysis. We conducted a cross-sectional epidemiological investigation involving 4290 subjects aged 20-80 yrs. We recorded periodontal risk factors and determined concentrations of serum magnesium and calcium, relating them to periodontal parameters. In a matched-pair study, 60 subjects using oral magnesium-containing drugs and 120 without were compared. In subjects aged 40 yrs and older, increased serum Mg/Ca was significantly associated with reduced probing depth (p<0.001), less attachment loss (p=0.006), and a higher number of remaining teeth (p=0.005). Subjects taking Mg drugs showed less attachment loss (p<0.01) and more remaining teeth than did their matched counterparts. These results suggest that nutritional magnesium supplementation may improve periodontal health. PMID:16183794

  3. Sputtered magnesium diboride thin films: Growth conditions and surface morphology

    NASA Astrophysics Data System (ADS)

    O'Brien, April; Villegas, Brendon; Gu, J. Y.

    2009-01-01

    Magnesium diboride (MgB 2) thin films were deposited on C-plane sapphire substrates by sputtering pure B and Mg targets at different substrate temperatures, and were followed by in situ annealing. A systematic study about the effects of the various growth and annealing parameters on the physical properties of MgB 2 thin films showed that the substrate temperature is the most critical factor that determines the superconducting transition temperature ( Tc), while annealing plays a minor role. There was no superconducting transition in the thin films grown at room temperature without post-annealing. The highest Tc of the samples grown at room temperature after the optimized annealing was 22 K. As the temperature of the substrate ( Ts) increased, Tc rose. However, the maximum Ts was limited due to the low magnesium sticking coefficient and thus the Tc value was limited as well. The highest Tc, 29 K, was obtained for the sample deposited at 180 °C, annealed at 620 °C, and was subsequently annealed a second time at 800 °C. Three-dimensional (3D) AFM images clearly demonstrated that the thin films with no transition, or very low Tc, did not have the well-developed MgB 2 grains while the films with higher Tc displayed the well-developed grains and smooth surface. Although the Tc of sputtered MgB 2 films in the current work is lower than that for the bulk and ex situ annealed thin films, this work presents an important step towards the fabrication of MgB 2 heterostructures using rather simple physical vapor deposition method such as sputtering.

  4. Combustion Synthesis of Magnesium Aluminate

    NASA Astrophysics Data System (ADS)

    Kale, M. A.; Joshi, C. P.; Moharil, S. V.

    2011-10-01

    In the system MgO-Al2O3, three compounds MgAl2O4, MgAl6O10 (also expressed as- Mg0.4Al2.4O4) and MgAl26O40 are well known. Importance of the first two is well established. Magnesium aluminate (MgAl2O4) spinel is a technologically important material due to its interesting thermal properties. The MgAl2O4 ceramics also find application as humidity sensors. Apart from the luminescence studies, the interest in MgAl2O4 is due to various applications such as humidity-sensing and PEM fuel cells, TL/OSL dosimetry of the ionizing radiations, white light source. Interest in the MgAl6O10 has aroused due to possible use as a substrate for GaN growth. Attempt was made to synthesize these compounds by the combustion synthesis using metal nitrates as oxidizer and urea as a fuel. Compounds MgAl2O4 and MgAl6O10 were formed in a single step, while MgAl26O40 was not formed by this procedure. Activation of MgAl6O10 by rare earth ions like Ce3+, Eu3+ and Tb3+ and ns2 ion Pb2+ could be achieved. Excitation bands for MgAl6O10 are at slightly shorter wavelengths compared to those reported for MgAl2O4.

  5. Combustion Synthesis of Magnesium Aluminate

    SciTech Connect

    Kale, M. A.; Joshi, C. P.; Moharil, S. V.

    2011-10-20

    In the system MgO-Al{sub 2}O{sub 3}, three compounds MgAl{sub 2}O{sub 4}, MgAl{sub 6}O{sub 10}(also expressed as-Mg{sub 0.4}Al{sub 2.4}O{sub 4}) and MgAl{sub 26}O{sub 40} are well known. Importance of the first two is well established. Magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel is a technologically important material due to its interesting thermal properties. The MgAl{sub 2}O{sub 4} ceramics also find application as humidity sensors. Apart from the luminescence studies, the interest in MgAl{sub 2}O{sub 4} is due to various applications such as humidity-sensing and PEM fuel cells, TL/OSL dosimetry of the ionizing radiations, white light source. Interest in the MgAl{sub 6}O{sub 10} has aroused due to possible use as a substrate for GaN growth. Attempt was made to synthesize these compounds by the combustion synthesis using metal nitrates as oxidizer and urea as a fuel. Compounds MgAl{sub 2}O{sub 4} and MgAl{sub 6}O{sub 10} were formed in a single step, while MgAl{sub 26}O{sub 40} was not formed by this procedure. Activation of MgAl{sub 6}O{sub 10} by rare earth ions like Ce{sup 3+}, Eu{sup 3+} and Tb{sup 3+} and ns{sup 2} ion Pb{sup 2+} could be achieved. Excitation bands for MgAl{sub 6}O{sub 10} are at slightly shorter wavelengths compared to those reported for MgAl{sub 2}O{sub 4}.

  6. Desulfurization of pure coal macerals

    SciTech Connect

    Hippo, E.J. ); Crelling, J.C. )

    1988-06-01

    The objectives of this study were to modify the present density gradient centrifugation (DGC) techniques for coal macerals to obtain 10-20 grams of target maceral concentrates and to determine the reactivity or ease of removing the organic sulfur in the various macerals with supercritical methanol extraction. Although the chemistry needed for this objective is not difficult, the accumulation of 10 to 20 gram quantities of ''pure'' petrographically verified single maceral concentrates has not been possible until now. The results of recent work have demonstrated that the individual macerals can be separated and verified. The accumulation of much larger quantities than have previously been separated was a problem that has been overcome by pre-concentrating target macerals at their density cut points. Supercritical fluid extraction of coals has previously been reported as a method in the production of liquid fuel products from coal under mild conditions and as a medium for selective desulfurization of coal. Alcohols are expected to exhibit greater solubility for polar organic molecules due to hydrogen bonding and dipole attractive forces, also providing the opportunity for chemical reactions during the extraction due to the nucleophilicity of the alcohol oxygen and the tendency to act as a hydrogen donor. In addition, enol rearrangements may play a role in desulfurization. As previously reported different supercritical reaction conditions produced different extents of desulfurization of coals (33.9 - 65.7%). These variable desulfurizations are probably a result of differences in extents of conversion of the pyritic sulfur (to various alteration products, such as pyrrhotite), as well as organic sulfur functionalities (thiophenol, sulfide, and thiopenes) to light gases such as dimethylsulfide, hydrogen sulfide, and methylmercaptons.

  7. Desulfurization of pure coal macerals

    SciTech Connect

    Hippo, E.J.; Crelling, J.C. )

    1988-01-01

    The objectives of this study were to modify the present density gradient centrifugation (DGC) techniques for coal macerals to obtain 10-20 grams of target maceral concentrates and to determine the reactivity or ease of removing the organic sulfur in the various macerals with supercritical methanol extraction. Although the chemistry needed for this objective is not difficult, the accumulation of 10 to 20 gram quantities of pure petrographically verified single maceral concentrates has not been possible until now. The results of recent work have demonstrated that the individual macerals can be separated and verified. The accumulation of much larger quantities than have previously been separated was a problem that has been overcome by pre-concentrating target macerals at their density cut points. Supercritical fluid extraction of coals has previously been reported as a method in the production of liquid fuel products from coal under mild conditions and as a medium for selective desulfurization of coal. Alcohols are expected to exhibit greater solubility for polar organic molecules due to hydrogen bonding and dipole attractive forces, also providing the opportunity for chemical reactions during the extraction due to the nucleophilicity of the alcohol oxygen and the tendency to act as a hydrogen donor. In addition, enol rearrangements may play a role in desulfurization. As previously reported different supercritical reaction conditions produced different extents of desulfurization of coals (33.9 - 65.7%). These variable desulfurizations are probably a result of differences in extents of conversion of the pyritic sulfur (to various alteration products, such as pyrrhotite), as well as organic sulfur functionalities (thiophenol, sulfide, and thiophenes) to light gases such as dimethylsulfide, hydrogen sulfide, and methylmercaptons.

  8. Magnesium-lithium alloys developed for low temperature use

    NASA Technical Reports Server (NTRS)

    Dunkerley, F. J.; Leavenworth, H. W., Jr.

    1967-01-01

    Three new magnesium-lithium alloys have been developed for application at cryogenic temperatures. These lightweight alloys have approximately doubled the tensile and yield strengths at room temperature of previously described magnesium-lithium alloys.

  9. Ice-melting characteristics of calcium magnesium acetate

    NASA Astrophysics Data System (ADS)

    Schenk, R. U.

    1986-01-01

    The objectives of the study are to determine the pertinent properties of Calcium/Magnesium Acetate and to determine the pH and ratio of calcium to magnesium that provide optimum road deicing characteristics.

  10. Alkalization is responsible for antibacterial effects of corroding magnesium.

    PubMed

    Rahim, Muhammad Imran; Eifler, Rainer; Rais, Bushra; Mueller, Peter P

    2015-11-01

    Magnesium alloys are presently investigated as potential medical implant materials for temporary applications. Magnesium has been reported to have antibacterial activities and could therefore be used to prevent antibiotic treatment-resistant bacterial implant infections. For characterizing the effects of magnesium on infectious bacteria, bioluminescent S. aureus or P. aeruginosa were employed. The proliferation of both types of bacteria was suppressed in the presence of metallic magnesium and also in aqueous magnesium corrosion extracts. Of the two soluble corrosion products, magnesium ions were well tolerated while antibacterial activities correlated with increased pH levels of the supernatants. The alkaline pH alone was sufficient for the antibacterial effects which were completely abolished when the pH of the corrosion supernatants was neutralized. These results demonstrate that pH increases are necessary and sufficient for the antibacterial activity of metallic magnesium. In an animal model magnesium implants showed an enhanced but variable resistance to bacterial colonization. PMID:25974048

  11. Acoustic Emission as a Tool for Exploring Deformation Mechanisms in Magnesium and Its Alloys In Situ

    NASA Astrophysics Data System (ADS)

    Vinogradov, Alexei; Máthis, Kristian

    2016-06-01

    Structural performance of magnesium alloys depends strongly on specific deformation mechanisms operating during mechanical loading. Therefore, in situ monitoring of the acting mechanisms is a key to performance tailoring. We review the capacity of the advanced acoustic emission (AE) technique to understand the interplay between two primary deformation mechanisms—dislocation slip and twinning—in real time scale. Details of relative contributions of dislocation slip and deformation twinning to the mechanical response of pure Mg and Mg-Al alloy are discussed in view of AE results obtained with the aid of recently proposed spectral and signal categorization algorithms in conjunction with with neutron diffraction data.

  12. Simulating the dynamic response of magnesium alloys

    NASA Astrophysics Data System (ADS)

    Lloyd, Jeffrey; Becker, Richard

    Unlike several conventional metals, the mechanical response of magnesium is severely anisotropic for quasistatic and dynamic loading conditions. In this work we present a crystal-based strength model that is the same order of magnitude in computational cost as rate-dependent isotropic strength models, yet is able to capture essential features exhibited by textured magnesium polycrystals. The model demarcates plastic deformation into contributions from basal slip, extension twinning, and non-basal slip mechanisms. Comparisons are made between model predictions and experiments for two magnesium alloys with differing processing histories. The model is then used to explore and quantify the dependence of metallurgical and processing variations for several dynamic experiments that probe propensity for localization and failure under complex loading conditions.

  13. Magnesium sulfate administration in subarachnoid hemorrhage.

    PubMed

    Suarez, Jose I

    2011-09-01

    Magnesium offers theoretic vascular and neuroprotective benefits for patients with subarachnoid hemorrhage. An electronic literature search was conducted to identify original research studies describing intravenous magnesium treatment in patients with SAH published in English between January 1990 and October 2010. Seventeen articles were identified and reviewed, including one phase III randomized-controlled clinical trial and six phase II randomized-controlled trials. Study quality was low for most of the included studies, with the phase III trial considered to be of moderate quality. Due to inconsistently reported benefits and the occurrence of side effects, phase II data suggested that intravenous magnesium for SAH provided either no overall net benefit or uncertain trade-offs. Benefit was likewise not supported in the single phase III clinical trial. PMID:21748496

  14. Organochlorine formation in magnesium electrowinning cells.

    PubMed

    Deutscher, R L; Cathro, K J

    2001-04-01

    The formation of organochlorines during the electrolytic production of magnesium was investigated using a laboratory-scale electrolytic cell having a graphite anode, a liquid aluminium alloy cathode, and a molten chloride electrolyte. The cell was operated at current densities ranging from 3000 to 10,000 A m(-2) and at temperatures ranging from 660 degrees C to 750 degrees C. Organochlorines were adsorbed from the cell off-gases onto silica gel, extracted with hexane, and determined by gas chromatography. All compounds identified were fully chlorinated aliphatic and aromatic compounds, the major components being hexachlorobutadiene, hexachlorobenzene, hexachloroethylene, and octachlorostyrene. The total amount of organochlorines per tonne of magnesium produced decreased with electrolysis time and with current density and increased with operating temperature; it was also dependent on the type of graphite employed. The output of organochlorines varied from 5 to 20 g t(-1) of magnesium. PMID:11297394

  15. Preparation of petaloid microspheres of basic magnesium carbonate.

    PubMed

    Ohkubo, Takahiro; Suzuki, Sei; Mitsuhashi, Kohei; Ogura, Taku; Iwanaga, Shinichi; Sakai, Hideki; Koishi, Masumi; Abe, Masahiko

    2007-05-22

    The synthesis of basic magnesium carbonate was examined under ultrasonic irradiation and was performed by the soda ash method using magnesium sulfate and sodium carbonate as starting materials. The particulate product was evaluated using SEM observations. Ultrasonic irradiation in the preparation of basic magnesium carbonate was found to give fine petaloid microspheres of about 3 mum in primary particle size. PMID:17458985

  16. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  17. Magnesium Intake and Prevalence of Metabolic Syndrome in Older Adults

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Higher dietary intake of magnesium (Mg) may protect against development of type 2 diabetes. The aim of this study was to examine the association between dietary magnesium intake and metabolic syndrome risk factors in elderly men and women. We examined cross-sectional associations between magnesium i...

  18. 40 CFR 721.10504 - Surface modified magnesium hydroxide (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Surface modified magnesium hydroxide... Specific Chemical Substances § 721.10504 Surface modified magnesium hydroxide (generic). (a) Chemical... as surface modified magnesium hydroxide (PMN P-06-682) is subject to reporting under this section...

  19. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  20. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  1. 40 CFR 721.10504 - Surface modified magnesium hydroxide (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Surface modified magnesium hydroxide... Specific Chemical Substances § 721.10504 Surface modified magnesium hydroxide (generic). (a) Chemical... as surface modified magnesium hydroxide (PMN P-06-682) is subject to reporting under this section...

  2. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  3. Magnesium retention in 12 to 48 month-old children

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In adults, adaptation to changes in magnesium intake is largely due to changes in fractional magnesium absorption and urinary magnesium excretion. We sought to examine whether these homeostatic mechanisms also occur in young children. Children, 12–48 m old, were studied (n=30). They were adapted to ...

  4. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  5. Chemically Prepared Lead Magnesium Niobate Dielectrics

    SciTech Connect

    Tuttle, B.A.; Voigt, J.A.; Sipola, D.L.; Olson, W.R.; Goy, D.M.

    1998-01-01

    A chemical solution powder synthesis technique has been developed that produces fine uniform powders of lead magnesium niobate (PMN) with 60 to 80 nm crystallite size. The synthesis technique was based on the dissolution of lead acetate and alkoxide precursors in acetic acid followed by precipitation with oxalic acid/propanol solutions. Lead magnesium niobate ceramics fabricated from these chemically derived powders had smaller, more uniform grain size and higher dielectric constants than ceramics fabricated from mixed oxide powders that were processed under similar thermal conditions.

  6. Upper critical field of cellular magnesium diboride

    NASA Astrophysics Data System (ADS)

    Grinenko, V. A.

    2007-08-01

    A cellular superconducting material consisting of thin (1 20 μm) MgB2-x layers and magnesium granules of about 100 μm has been produced. The critical temperature T c of this superconductor decreases with the thickness of the MgB2-x layers. In unalloyed magnesium diboride, the curvature of the temperature dependence of the upper critical field H c2(T) changes gradually from downward to pronounced upward as the temperature T c decreases from 38 to 36 K.

  7. SOLID STATE JOINING OF MAGNESIUM TO STEEL

    SciTech Connect

    Jana, Saumyadeep; Hovanski, Yuri; Pilli, Siva Prasad; Field, David P.; Yu, Hao; Pan, Tsung-Yu; Santella, M. L.

    2012-06-04

    Friction stir welding and ultrasonic welding techniques were applied to join automotive magnesium alloys to steel sheet. The effect of tooling and process parameters on the post-weld microstructure, texture and mechanical properties was investigated. Static and dynamic loading were utilized to investigate the joint strength of both cast and wrought magnesium alloys including their susceptibility and degradation under corrosive media. The conditions required to produce joint strengths in excess of 75% of the base metal strength were determined, and the effects of surface coatings, tooling and weld parameters on weld properties are presented.

  8. Mobility of cations in magnesium aluminate spinel

    NASA Astrophysics Data System (ADS)

    Martinelli, J. R.; Sonder, E.; Weeks, R. A.; Zuhr, R. A.

    1986-04-01

    Transport of cations in magnesium aluminate spinel due to an applied electric field at approximately 1000 °C has been measured by observing changes in elemental concentrations near the cathode and anode surfaces using ion backscattering techniques. The results indicate that magnesium ions are the mobile species at 1000 °C and that these ions combine with ambient oxygen at the cathode surface to form a MgO layer. Quantitative interpretation of the data leads to the conclusion that the ionic transference number of spinel becomes approximately 0.5 after treatment in an electric field.

  9. Cyclic Plastic Deformation, Fatigue, and the Associated Micro-Mechanisms in Magnesium: From Single Crystal to Polycrystal

    NASA Astrophysics Data System (ADS)

    Yu, Qin

    Magnesium and its alloys have received substantial interests as the government initiatives on energy saving and environment protection demand an increasing use of lightweight materials in structural parts, especially in transportation industries. A good understanding of fatigue behavior in magnesium is critical to ensure the reliability and durability of the magnesium components. Unlike the body centered cubic and face centered cubic metals, fundamental knowledge concerning the cyclic deformation and fatigue in hexagonal close packed magnesium is limited. The current research aims at a better understanding of the micro-mechanisms associated with the cyclic deformation and fatigue of magnesium. Magnesium single crystal was chosen to study the fundamental twinning/detwinning process while extruded polycrystalline pure magnesium was studied for the fatigue damage mechanisms. Cyclic deformation and the corresponding morphology evolution of {1 0 1¯ 2} twinning-detwinning-retwinning are, for the first time, characterized in magnesium single crystal under fully reserved strain-controlled tension-compression utilizing in situ optical microscopy. As loading cycles are increased, the activity of twinning-detwinning-retwinning gradually decreases. Microscopy after fatigue shows that the matrix region having experienced repeated twinning-detwinning cannot be completely detwinned to its original crystal orientation. Fragmented secondary tension twins are found to result from twin-twin interactions. Various twin-twin interaction structures exist in fatigued magnesium single crystal: quilted-looking twin structure, "apparent crossing" twin structure, and double tension twin structure. According to the crystallography of magnesium, twin-twin interactions are classified into Type I for two twin variants sharing the same zone axis and Type II for two twins with different zone axes. For Type I twin-twin interactions, one twin does not transmit across the twin boundary and into the

  10. The art of magnesium transport.

    PubMed

    de Baaij, Jeroen H F

    2015-01-01

    Patients with hypomagnesemia suffer from a wide range of symptoms including muscle cramps, cardiac arrhythmias and epilepsy. Disturbances in body Mg(2+) homeostasis can often be attributed to increased Mg(2+) excretion by the kidney. Within the kidney, the distal convoluted tubule (DCT) segment determines the final Mg(2+) excretion, since no reabsorption takes place beyond this segment of the nephron. On 21(st) of January 2015, Jeroen de Baaij defended his thesis "The Distal Convoluted Tubule: the Art of Magnesium Transport", in which he aimed to identify new genes involved in Mg(2+) reabsorption in the DCT. This review summarizes the main findings of his graduate research. TRPM6 mediates apical Mg(2+) entry into the DCT cell and is highly regulated by EGF, insulin and pH. ATP and flavagline compounds have been characterized as new regulators of TRPM6 activity, providing novel pathways to target Mg(2+) disturbances. Using isolated primary DCT cells from mice, PCBD1 was identified as a new transcriptional regulator of Mg(2+) transport in the DCT. Indeed, patients with PCBD1 mutations were shown to suffer hypomagnesemia and MODY5-like diabetes. Subsequently, the work presented in the thesis focused on the elucidation of the basolateral Mg(2+) extrusion of the DCT cell. In vivo studies using SLC41A3-knockout mice suggest that SLC41A3 may act as Mg(2+) extrusion mechanism. CNNM2 has long been hypothesized to transport Mg(2+) at the basolateral membrane of the DCT. However, by determining the protein topology and homology modeling of the CBS domains, it was argued that CNNM2 is rather an Mg(2+)-sensing mechanism. Follow-up studies using (25)Mg(2+) isotopes showed that CNNM2 increases Mg(2+) uptake when overexpressed in HEK293 cells. Additionally, by knocking down cnnm2 in zebrafish, CNNM2 was demonstrated to be essential for brain development and Mg(2+) homeostasis. Mutations in CNNM2 were shown to cause hypomagnesemia, seizures and intellectual disability. Altogether

  11. Magnesium status and association with diabetes in the Taiwanese elderly.

    PubMed

    Wang, Jui-Line; Shaw, Ning-Sing; Yeh, Hsiang-Yu; Kao, Mei-Ding

    2005-01-01

    The average dietary intake of magnesium is below recommended dietary allowances in many affluent Western countries. Prolonged low magnesium intake tends to result in hypomagnesaemia which might increase the risk of chronic diseases in elderly people. A national population-based cross-sectional nutrition survey, the Elderly Nutrition and Health Survey in Taiwan (1999-2000), was used to investigate the magnesium status and association with diabetes in the Taiwanese elderly. Dietary magnesium intake was based on 24-hour dietary recalls. Blood biochemical parameters including plasma magnesium and blood glucose were also measured. Average magnesium intake was 250 mg in men and 216 mg in women, which is equivalent to 68-70% of relevant Taiwanese Dietary Reference Intakes. The mean plasma magnesium concentration was 0.903 mmol/L in men and 0.906 mmol/L in women. The prevalence of a plasma magnesium level of <0.7 mmol/L was 0.7-0.9% in the elderly, and that of <0.8 mmol/L was 8.0-9.1%. Elderly vegans had a significantly lower magnesium intake than ovo-lacto vegetarians and non-vegetarians. Diabetic men and women had significantly higher blood glucose levels than non-diabetics. The risk of diabetes was elevated 3.25 times at plasma magnesium levels<0.863 mmol/L. There was an inverse association between plasma magnesium concentration and the prevalence of diabetes. However, no association was found between diabetes and low dietary magnesium. Taiwanese elderly persons had suboptimal levels of dietary magnesium intake, which although may be sufficient to avoid overt magnesium deficiency, may not be sufficient to reduce the risk of diabetes in the elderly. Further prospective study is required to help explain the differential results between dietary and plasma magnesium levels. PMID:16169838

  12. Magnesium substitution in the structure of orthopedic nanoparticles: A comparison between amorphous magnesium phosphates, calcium magnesium phosphates, and hydroxyapatites.

    PubMed

    Nabiyouni, Maryam; Ren, Yufu; Bhaduri, Sarit B

    2015-01-01

    As biocompatible materials, magnesium phosphates have received a lot of attention for orthopedic applications. During the last decade multiple studies have shown advantages for magnesium phosphate such as lack of cytotoxicity, biocompatibility, strong mechanical properties, and high biodegradability. The present study investigates the role of Mg(+2) and Ca(+2) ions in the structure of magnesium phosphate and calcium phosphate nanoparticles. To directly compare the effect of Mg(+2) and Ca(+2) ions on structure of nanoparticles and their biological behavior, three groups of nanoparticles including amorphous magnesium phosphates (AMPs) which release Mg(+2), calcium magnesium phosphates (CMPs) which release Mg(+2) and Ca(+2), and hydroxyapatites (HAs) which release Ca(+2) were studied. SEM, TEM, XRD, and FTIR were used to evaluate the morphology, crystallinity, and chemical properties of the particles. AMP particles were homogeneous nanospheres, whereas CMPs were combinations of heterogeneous nanorods and nanospheres, and HAs which contained heterogeneous nanosphere particles. Cell compatibility was monitored in all groups to determine the cytotoxicity effect of particles on studied MC3T3-E1 preosteoblasts. AMPs showed significantly higher attachment rate than the HAs after 1 day and both AMPs and CMPs showed significantly higher proliferation rate when compared to HAs after 7days. Gene expression level of osteoblastic markers ALP, COL I, OCN, OPN, RUNX2 were monitored and they were normalized to GAPDH housekeeping gene. Beta actin expression level was monitored as the second housekeeping gene to confirm the accuracy of results. In general, AMPs and CMPs showed higher expression level of osteoblastic genes after 7 days which can further confirm the stimulating role of Mg(+2) and Ca(+2) ions in increasing the proliferation rate, differentiation, and mineralization of MC3T3-E1 preosteoblasts. PMID:25953534

  13. Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium.

    PubMed

    Saha, Partha; Roy, Mangal; Datta, Moni Kanchan; Lee, Boeun; Kumta, Prashant N

    2015-12-01

    Magnesium is a new class of biodegradable metals potentially suitable for bone fracture fixation due to its suitable mechanical properties, high degradability and biocompatibility. However, rapid corrosion and loss in mechanical strength under physiological conditions render it unsuitable for load-bearing applications. In the present study, grain refinement was implemented to control bio-corrosion demonstrating improved in vitro bioactivity of magnesium. Pure commercial magnesium was grain refined using different amounts of zirconium (0.25 and 1.0 wt.%). Corrosion behavior was studied by potentiodynamic polarization (PDP) and mass loss immersion tests demonstrating corrosion rate decrease with grain size reduction. In vitro biocompatibility tests conducted by MC3T3-E1 pre-osteoblast cells and measured by DNA quantification demonstrate significant increase in cell proliferation for Mg-1 wt.% Zr at day 5. Similarly, alkaline phosphatase (ALP) activity was higher for grain refined Mg. Alloys were also tested for ability to support osteoclast differentiation using RAW264.7 monocytes with receptor activator of nuclear factor kappa-β ligand (RANKL) supplemented cell culture. Osteoclast differentiation process was observed to be severely restricted for smaller grained Mg. Overall, the results indicate grain refinement to be useful not only for improving corrosion resistance of Mg implants for bone fixation devices but also potentially modulate bone regeneration around the implant. PMID:26354267

  14. Magnesium degradation influenced by buffering salts in concentrations typical of in vitro and in vivo models.

    PubMed

    Agha, Nezha Ahmad; Feyerabend, Frank; Mihailova, Boriana; Heidrich, Stefanie; Bismayer, Ulrich; Willumeit-Römer, Regine

    2016-01-01

    Magnesium and its alloys have considerable potential for orthopedic applications. During the degradation process the interface between material and tissue is continuously changing. Moreover, too fast or uncontrolled degradation is detrimental for the outcome in vivo. Therefore in vitro setups utilizing physiological conditions are promising for the material/degradation analysis prior to animal experiments. The aim of this study is to elucidate the influence of inorganic salts contributing to the blood buffering capacity on degradation. Extruded pure magnesium samples were immersed under cell culture conditions for 3 and 10 days. Hank's balanced salt solution without calcium and magnesium (HBSS) plus 10% of fetal bovine serum (FBS) was used as the basic immersion medium. Additionally, different inorganic salts were added with respect to concentration in Dulbecco's modified Eagle's medium (DMEM, in vitro model) and human plasma (in vivo model) to form 12 different immersion media. Influences on the surrounding environment were observed by measuring pH and osmolality. The degradation interface was analyzed by electron-induced X-ray emission (EIXE) spectroscopy, including chemical-element mappings and electron microprobe analysis, as well as Fourier transform infrared reflection micro-spectroscopy (FTIR). PMID:26478376

  15. In Vitro Biocompatibility and Endothelialization of Novel Magnesium-Rare Earth Alloys for Improved Stent Applications

    PubMed Central

    Zhao, Nan; Watson, Nevija; Xu, Zhigang; Chen, Yongjun; Waterman, Jenora; Sankar, Jagannathan; Zhu, Donghui

    2014-01-01

    Magnesium (Mg) based alloys are the most advanced cardiovascular stent materials. This new generation of stent scaffold is currently under clinical evaluation with encouraging outcomes. All these Mg alloys contain a certain amount of rare earth (RE) elements though the exact composition is not yet disclosed. RE alloying can usually enhance the mechanical strength of different metal alloys but their toxicity might be an issue for medical applications. It is still unclear how RE elements will affect the magnesium (Mg) alloys intended for stent materials as a whole. In this study, we evaluated MgZnCaY-1RE, MgZnCaY-2RE, MgYZr-1RE, and MgZnYZr-1RE alloys for cardiovascular stents applications regarding their mechanical strength, corrosion resistance, hemolysis, platelet adhesion/activation, and endothelial biocompatibility. The mechanical properties of all alloys were significantly improved. Potentiodynamic polarization showed that the corrosion resistance of four alloys was at least 3–10 times higher than that of pure Mg control. Hemolysis test revealed that all the materials were non-hemolytic while little to moderate platelet adhesion was found on all materials surface. No significant cytotoxicity was observed in human aorta endothelial cells cultured with magnesium alloy extract solution for up to seven days. Direct endothelialization test showed that all the alloys possess significantly better capability to sustain endothelial cell attachment and growth. The results demonstrated the promising potential of these alloys for stent material applications in the future. PMID:24921251

  16. Method of preparing pure fluorine gas

    DOEpatents

    Asprey, Larned B.

    1976-01-01

    A simple, inexpensive system for purifying and storing pure fluorine is described. The method utilizes alkali metal-nickel fluorides to absorb tank fluorine by forming nickel complex salts and leaving the gaseous impurities which are pumped away. The complex nickel fluoride is then heated to evolve back pure gaseous fluorine.

  17. Direct Hydrogenation Magnesium Boride to Magnesium Borohydride: Demonstration of >11 Weight Percent Reversible Hydrogen Storage

    SciTech Connect

    Severa, Godwin; Ronnebro, Ewa; Jensen, Craig M.

    2010-11-16

    We here for the first time demonstrate direct hydrogenation of magnesium boride, MgB2, to magnesium borohydride, Mg(BH4)2 at 900 bar H2-pressures and 400°C. Upon 14.8wt% hydrogen release, the end-decomposition product of Mg(BH4)2 is MgB2, thus, this is a unique reversible path here obtaining >11wt% H2 which implies promise for a fully reversible hydrogen storage material.

  18. 21 CFR 184.1425 - Magnesium carbonate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium carbonate. 184.1425 Section 184.1425 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  19. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  20. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  1. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium hydroxide. 184.1428 Section 184.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  2. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  3. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  4. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... introduced or initially delivered for introduction into interstate commerce after the following dates is... over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  5. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... introduced or initially delivered for introduction into interstate commerce after the following dates is... over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  6. 21 CFR 201.71 - Magnesium labeling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... introduced or initially delivered for introduction into interstate commerce after the following dates is... over-the-counter (OTC) drug products intended for oral ingestion shall contain the magnesium...

  7. 21 CFR 184.1428 - Magnesium hydroxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium hydroxide. 184.1428 Section 184.1428 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  8. 21 CFR 184.1426 - Magnesium chloride.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium chloride. 184.1426 Section 184.1426 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  9. 21 CFR 184.1431 - Magnesium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium oxide. 184.1431 Section 184.1431 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  10. 21 CFR 184.1443 - Magnesium sulfate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Magnesium sulfate. 184.1443 Section 184.1443 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS...

  11. Calcium, magnesium, and potassium in food

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The biochemical and physiological functions and consequences of deficient intakes, which show the nutritional importance of calcium, magnesium and potassium for humans, are reviewed. The dietary recommendations and food sources for these essential mineral elements for humans are presented. Factors t...

  12. Preparation of thorium magnesium-zinc reduction

    NASA Technical Reports Server (NTRS)

    Hariharan, A. V.; Knighton, J. B.; Steunenberg, R. K.

    1969-01-01

    Magnesium-zinc reduction of thorium dioxide is used for the preparation of thorium metal. Potential economic advantages of this technique include use of relatively inexpensive reagents for the metal and flux phases, and production of metal of acceptable quality in good yield.

  13. Effect of magnesium ion on human osteoblast activity

    PubMed Central

    He, L.Y.; Zhang, X.M.; Liu, B.; Tian, Y.; Ma, W.H.

    2016-01-01

    Magnesium, a promising biodegradable metal, has been reported in several studies to increase bone formation. Although there is some information regarding the concentrations of magnesium ions that affect bone remodeling at a cellular level, little is known about the effect of magnesium ions on cell gap junctions. Therefore, this study aimed to systematically investigate the effects of different concentrations of magnesium on bone cells, and further evaluate its effect on gap junctions of osteoblasts. Cultures of normal human osteoblasts were treated with magnesium ions at concentrations of 1, 2 and 3 mM, for 24, 48 and 72 h. The effects of magnesium ions on viability and function of normal human osteoblasts and on gap junction intercellular communication (GJIC) in osteoblasts were investigated. Magnesium ions induced significant (P<0.05) increases in cell viability, alkaline phosphate activity and osteocalcin levels of human osteoblasts. These stimulatory actions were positively associated with the concentration of magnesium and the time of exposure. Furthermore, the GJIC of osteoblasts was significantly promoted by magnesium ions. In conclusion, this study demonstrated that magnesium ions induced the activity of osteoblasts by enhancing GJIC between cells, and influenced bone formation. These findings may contribute to a better understanding of the influence of magnesium on bone remodeling and to the advance of its application in clinical practice. PMID:27383121

  14. Effect of magnesium deficiency on erythrocyte aging in rats.

    PubMed Central

    Elin, R. J.; Utter, A.; Tan, H. K.; Corash, L.

    1980-01-01

    Rats placed on a magnesium-deficient diet show decreased erythrocyte magnesium concentration, shortened erythrocyte survival, and erythrocyte membrane ultrastructure defects and become progressively anemic. Whether these pathologic processes are due to abnormal erythropoiesis or occur in the peripheral circulation is unknown. In the present study, magnesium and hemoglobin concentrations, reticulocyte count, erythrocyte pyrophosphatase, and pyruvate kinase activities were determined at weekly intervals for 6 weeks in whole blood and age-dependent erythrocyte fractions isolated from inbred Fisher rats fed a diet deficient in magnesium or the same diet with added magnesium. Freeze-fracture electron microscopic examinations were performed on age-dependent erythrocyte fractions to evaluate the membrane defect. The youngest red cells from magnesium-deficient rats were similar to those of control animals with respect to erythrocyte magnesium concentrations, pyrophosphatase activities, and membrane morphology. The older erythrocyte fractions from magnesium-deficient rats showed significant decreases in magnesium concentrations, pyrophosphatase activity, and the presence of membrane abnormalities. Thus, new erythrocytes produced in magnesium-deficient rats appear to be normal but rapidly develop biochemical and morphologic abnormalities with aging in a magnesium-deficient plasma environment. Images Figure 1 PMID:6106388

  15. Assessment of magnesium status for diagnosis and therapy.

    PubMed

    Elin, Ronald J

    2010-12-01

    Magnesium is an essential element needed for health. Even though only 1% of the total body magnesium is present in blood, the serum magnesium concentration (SMC) is the predominant test used by medicine to assess magnesium status in patients. The traditional method to establish a reference interval for the SMC is flawed by the large number of "normal" individuals who have a subtle chronic negative magnesium balance due to a significant decrease in magnesium intake over the past century. Evidence-based medicine should be used to establish the appropriate lower limit of the reference interval for health and I recommend 0.85 mmol/L based on current literature. The decrease in magnesium in the diet has led to chronic latent magnesium deficiency in a large number of people since their SMC is still within the reference interval due to primarily the bone magnesium supplementing the SMC. These individuals need adjustment of their diet or magnesium supplementation to achieve a normal magnesium status for health. PMID:20736141

  16. Nanostructured magnesium has fewer detrimental effects on osteoblast function

    PubMed Central

    Weng, Lucy; Webster, Thomas J

    2013-01-01

    Efforts have been made recently to implement nanoscale surface features on magnesium, a biodegradable metal, to increase bone formation. Compared with normal magnesium, nanostructured magnesium has unique characteristics, including increased grain boundary properties, surface to volume ratio, surface roughness, and surface energy, which may influence the initial adsorption of proteins known to promote the function of osteoblasts (bone-forming cells). Previous studies have shown that one way to increase nanosurface roughness on magnesium is to soak the metal in NaOH. However, it has not been determined if degradation of magnesium is altered by creating nanoscale features on its surface to influence osteoblast density. The aim of the present in vitro study was to determine the influence of degradation of nanostructured magnesium, created by soaking in NaOH, on osteoblast density. Our results showed a less detrimental effect of magnesium degradation on osteoblast density when magnesium was treated with NaOH to create nanoscale surface features. The detrimental degradation products of magnesium are of significant concern when considering use of magnesium as an orthopedic implant material, and this study identified a surface treatment, ie, soaking in NaOH to create nanoscale features for magnesium that can improve its use in numerous orthopedic applications. PMID:23674891

  17. Fabrication and characterization of AZ91/CNT magnesium matrix composites

    NASA Astrophysics Data System (ADS)

    Park, Yong-Ha; Park, Yong-Ho; Park, Ik-Min; Oak, Jeong-jung; Kimura, Hisamichi; Cho, Kyung-Mox

    2008-12-01

    Carbon Nano Tube (CNT) reinforced AZ91 metal matrix composites (MMC) were fabricated by the squeeze infiltrated method. Properties of magnesium alloys have been improved by impurity reduction, surface treatment and alloy design, and thus the usage for the magnesium alloys has been extended recently. However there still remain barriers for the adaption of magnesium alloys for engineering materials. In this study, we report light-weight, high strength heat resistant magnesium matrix composites. Microstructural study and tensile test were performed for the squeeze infiltrated magnesium matrix composites. The wear properties were characterized and the possibility for the application to automotive power train and engine parts was investigated. It was found that the squeeze infiltration technique is a proper method to fabricate magnesium matrix composites reducing casting defects such as pores and matrix/reinforcement interface separation etc. Improved tensile and mechanical properties were obtained with CNT reinforcing magnesium alloys

  18. Assessment of the magnesium primary production technology. Final report

    SciTech Connect

    Flemings, M.C.; Kenney, G.B.; Sadoway, D.R.; Clark, J.P.; Szekely, J.

    1981-02-01

    At current production levels, direct energy savings achievable in primary magnesium production are 1.2 milliquads of energy per annum. Were magnesium to penetrate the automotive market to an average level of 50 pounds per vehicle, the resultant energy savings at the production stage would be somewhat larger, but the resulting savings in gasoline would conserve an estimated 325 milliquads of energy per year. The principal barrier to more widespread use of magnesium in the immediate future is its price. A price reduction of magnesium of 10% would lead to widespread conversion of aluminum die and permanent mold castings to magnesium. This report addresses the technology of electrolytic and thermic magnesium production and the economics of expanded magnesium production and use.

  19. Final report on the safety assessment of aluminum silicate, calcium silicate, magnesium aluminum silicate, magnesium silicate, magnesium trisilicate, sodium magnesium silicate, zirconium silicate, attapulgite, bentonite, Fuller's earth, hectorite, kaolin, lithium magnesium silicate, lithium magnesium sodium silicate, montmorillonite, pyrophyllite, and zeolite.

    PubMed

    Elmore, Amy R

    2003-01-01

    This report reviews the safety of Aluminum, Calcium, Lithium Magnesium, Lithium Magnesium Sodium, Magnesium Aluminum, Magnesium, Sodium Magnesium, and Zirconium Silicates, Magnesium Trisilicate, Attapulgite, Bentonite, Fuller's Earth, Hectorite, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite as used in cosmetic formulations. The common aspect of all these claylike ingredients is that they contain silicon, oxygen, and one or more metals. Many silicates occur naturally and are mined; yet others are produced synthetically. Typical cosmetic uses of silicates include abrasive, opacifying agent, viscosity-increasing agent, anticaking agent, emulsion stabilizer, binder, and suspending agent. Clay silicates (silicates containing water in their structure) primarily function as adsorbents, opacifiers, and viscosity-increasing agents. Pyrophyllite is also used as a colorant. The International Agency for Research on Cancer has ruled Attapulgite fibers >5 microm as possibly carcinogenic to humans, but fibers <5 microm were not classified as to their carcinogenicity to humans. Likewise, Clinoptilolite, Phillipsite, Mordenite, Nonfibrous Japanese Zeolite, and synthetic Zeolites were not classified as to their carcinogenicity to humans. These ingredients are not significantly toxic in oral acute or short-term oral or parenteral toxicity studies in animals. Inhalation toxicity, however, is readily demonstrated in animals. Particle size, fibrogenicity, concentration, and mineral composition had the greatest effect on toxicity. Larger particle size and longer and wider fibers cause more adverse effects. Magnesium Aluminum Silicate was a weak primary skin irritant in rabbits and had no cumulative skin irritation in guinea pigs. No gross effects were reported in any of these studies. Sodium Magnesium Silicate had no primary skin irritation in rabbits and had no cumulative skin irritation in guinea pigs. Hectorite was nonirritating to the skin of rabbits in a Draize primary skin

  20. Magnesium Alloys as a Biomaterial for Degradable Craniofacial Screws

    PubMed Central

    Henderson, Sarah E.; Verdelis, Konstantinos; Maiti, Spandan; Pal, Siladitya; Chung, William L.; Chou, Da-Tren; Kumta, Prashant N.; Almarza, Alejandro J.

    2014-01-01

    Recently, magnesium (Mg) alloys have received significant attention as a potential biomaterial for degradable implants, and this study was directed at evaluating the suitability of Mg for craniofacial bone screws. The objective was to implant screws fabricated from commercially available Mg-alloys (pure Mg and AZ31) in-vivo in a rabbit mandible. First, Mg-alloy screws were compared to stainless steel screws in an in-vitro pull-out test and determined to have a similar holding strength (~40N). A finite element model of the screw was created using the pull-out test data, and the model can be used for future Mg-alloy screw design. Then, Mg-alloy screws were implanted for 4, 8, and 12 weeks, with two controls of an osteotomy site (hole) with no implant and a stainless steel screw implanted for 12 weeks. MicroCT (computed tomography) was used to assess bone remodeling and Mg-alloy degradation, both visually and qualitatively through volume fraction measurements for all time points. Histologic analysis was also completed for the Mg-alloys at 12 weeks. The results showed that craniofacial bone remodeling occurred around both Mg-alloy screw types. Pure Mg had a different degradation profile than AZ31, however bone growth occurred around both screw types. The degradation rate of both Mg-alloy screw types in the bone marrow space and the muscle were faster than in the cortical bone space at 12 weeks. Furthermore, it was shown that by alloying Mg, the degradation profile could be changed. These results indicate the promise of using Mg-alloys for craniofacial applications. PMID:24384125

  1. Effect of magnesium oxide content on oxidation behavior of some superalloy-base cermets

    NASA Technical Reports Server (NTRS)

    Zaplatynsky, I.

    1975-01-01

    The effect of increasing magnesium oxide (MgO) content on the cyclic oxidation resistance of hot-pressed cermets of MgO in NiCrAlY, MgO in Hoskins-875, MgO in Inconel-702, and MgO in Hastelloy-X was investigated. The cermets with magnesium oxide levels of 5, 10, 20, and 40 vol percent were examined. The cyclic oxidation behavior of these cermets at 1100 and 1200 C in still air was determined by a thermogravimetric method supplemented by X-ray diffraction analysis and light and electron microscopy. In all instances, MgO prevented grain growth in the metallic phase. No evidence of oxidation along interphase boundaries was detected. Cermets of MgO in NiCrAlY and MgO in Hoskins-875 were superior to cermets of MgO in Inconel-702 and MgO in Hastelloy-X. Their oxidation resistance was degraded only when the MgO content was 40 vol percent. The oxidation behavior of MgO-in-Inconel-702 powder cermets containing 5- and 10-vol percent MgO was approximately similar to that of pure Inconel-702 compacts. The 20- and 40-vol percent MgO content reduced the oxidation resistance of MgO-in-Inconel-702 powder cermets relative to that of pure Inconel-702.

  2. Ascorbic acid, calcium, phosphorus and magnesium intake variations: effects on calcium, phosphorus and magnesium utilization by human adults

    SciTech Connect

    Kies, C.; Brennan, M.A.; Parks, S.K.; Stauffer, D.J.; Wang, H.Y.; Young, S.F.; Fox, H.M.

    1986-03-01

    The objective of the study was to determine the effects of feeding two levels of ascorbic acid, calcium, phosphorus, magnesium and ascorbic acid on the apparent utilization of calcium, phosphorus and magnesium by healthy, human adult subjects. During 4 randomly-arranged experimental periods of 7 days each, a laboratory-controlled diet alone or with supplements of ascorbic acid, dicalcium phosphate or magnesium oxide was fed to the 18 subjects. Results indicated that ascorbic acid supplementation tended to reduce urinary phosphorus loss and to slightly increase fecal phosphorus loss so that overall phosphorus balances became more positive. Conversely, under these conditions, urinary calcium losses were little affected but fecal calcium losses were increased resulting in an overall decrease in calcium balance with ascorbic acid supplementation. Ascorbic acid supplementation resulted in decreased urine and fecal losses of magnesium and more positive magnesium balances. Magnesium supplementation resulted in more positive calcium and phosphorus balances as did calcium phosphate supplementation on magnesium balance.

  3. Conformal pure radiation with parallel rays

    NASA Astrophysics Data System (ADS)

    Leistner, Thomas; Nurowski, Paweł

    2012-03-01

    We define pure radiation metrics with parallel rays to be n-dimensional pseudo-Riemannian metrics that admit a parallel null line bundle K and whose Ricci tensor vanishes on vectors that are orthogonal to K. We give necessary conditions in terms of the Weyl, Cotton and Bach tensors for a pseudo-Riemannian metric to be conformal to a pure radiation metric with parallel rays. Then, we derive conditions in terms of the tractor calculus that are equivalent to the existence of a pure radiation metric with parallel rays in a conformal class. We also give analogous results for n-dimensional pseudo-Riemannian pp-waves.

  4. Transport of Magnesium by a Bacterial Nramp-Related Gene

    PubMed Central

    Rodionov, Dmitry A.; Freedman, Benjamin G.; Senger, Ryan S.; Winkler, Wade C.

    2014-01-01

    Magnesium is an essential divalent metal that serves many cellular functions. While most divalent cations are maintained at relatively low intracellular concentrations, magnesium is maintained at a higher level (∼0.5–2.0 mM). Three families of transport proteins were previously identified for magnesium import: CorA, MgtE, and MgtA/MgtB P-type ATPases. In the current study, we find that expression of a bacterial protein unrelated to these transporters can fully restore growth to a bacterial mutant that lacks known magnesium transporters, suggesting it is a new importer for magnesium. We demonstrate that this transport activity is likely to be specific rather than resulting from substrate promiscuity because the proteins are incapable of manganese import. This magnesium transport protein is distantly related to the Nramp family of proteins, which have been shown to transport divalent cations but have never been shown to recognize magnesium. We also find gene expression of the new magnesium transporter to be controlled by a magnesium-sensing riboswitch. Importantly, we find additional examples of riboswitch-regulated homologues, suggesting that they are a frequent occurrence in bacteria. Therefore, our aggregate data discover a new and perhaps broadly important path for magnesium import and highlight how identification of riboswitch RNAs can help shed light on new, and sometimes unexpected, functions of their downstream genes. PMID:24968120

  5. Transport of magnesium by a bacterial Nramp-related gene.

    PubMed

    Shin, Jung-Ho; Wakeman, Catherine A; Goodson, Jonathan R; Rodionov, Dmitry A; Freedman, Benjamin G; Senger, Ryan S; Winkler, Wade C

    2014-06-01

    Magnesium is an essential divalent metal that serves many cellular functions. While most divalent cations are maintained at relatively low intracellular concentrations, magnesium is maintained at a higher level (∼0.5-2.0 mM). Three families of transport proteins were previously identified for magnesium import: CorA, MgtE, and MgtA/MgtB P-type ATPases. In the current study, we find that expression of a bacterial protein unrelated to these transporters can fully restore growth to a bacterial mutant that lacks known magnesium transporters, suggesting it is a new importer for magnesium. We demonstrate that this transport activity is likely to be specific rather than resulting from substrate promiscuity because the proteins are incapable of manganese import. This magnesium transport protein is distantly related to the Nramp family of proteins, which have been shown to transport divalent cations but have never been shown to recognize magnesium. We also find gene expression of the new magnesium transporter to be controlled by a magnesium-sensing riboswitch. Importantly, we find additional examples of riboswitch-regulated homologues, suggesting that they are a frequent occurrence in bacteria. Therefore, our aggregate data discover a new and perhaps broadly important path for magnesium import and highlight how identification of riboswitch RNAs can help shed light on new, and sometimes unexpected, functions of their downstream genes. PMID:24968120

  6. Making Pure Fine-Grained Inorganic Powder

    NASA Technical Reports Server (NTRS)

    Wood, C.

    1985-01-01

    Sustained arc plasma chemical reactor fabricates very-fine-grained inorganic solids having low thermal conductivity. Powder fabrication method, based on plasma tube technique produces pure solids without contamination commonly produced by grinding.

  7. [Biological properties of immunochemically pure tetanus antitoxin].

    PubMed

    Kornilova, A V; Khavkin, Iu A; Batalova, T A; Aleksevich, Ia I; Baschenko, I A

    1983-02-01

    Immunochemically pure tetanus antitoxin obtained from enzyme-treated horse serum is less reactogenic and anaphylactogenic and possesses higher therapeutic properties than antitoxin purified by nonspecific physico-chemical methods and containing ballast antigens. Due to its increased persistence in the recipient's body, the immunochemically pure antitoxin induces passive immunity in considerably lower doses than the preparations purified by the method "Diaferm-3". PMID:6340393

  8. Notes on the ambitwistor pure spinor string

    NASA Astrophysics Data System (ADS)

    Jusinskas, Renann Lipinski

    2016-05-01

    In this work, some aspects of the ambitwistor pure spinor string are investigated. The b ghost is presented and its main properties are derived in a simple way, very similar to the usual pure spinor b ghost construction. The heterotic case is also addressed with a new proposal for the BRST charge. The BRST cohomology is shown to correctly describe the heterotic supergravity spectrum and a semi-composite b ghost is constructed.

  9. Rehabilitation of pure alexia: A review

    PubMed Central

    Starrfelt, Randi; Ólafsdóttir, Rannveig Rós; Arendt, Ida-Marie

    2013-01-01

    Acquired reading problems caused by brain injury (alexia) are common, either as a part of an aphasic syndrome, or as an isolated symptom. In pure alexia, reading is impaired while other language functions, including writing, are spared. Being in many ways a simple syndrome, one would think that pure alexia was an easy target for rehabilitation efforts. We review the literature on rehabilitation of pure alexia from 1990 to the present, and find that patients differ widely on several dimensions, such as alexia severity and associated deficits. Many patients reported to have pure alexia in the reviewed studies, have associated deficits such as agraphia or aphasia and thus do not strictly conform to the diagnosis. Few studies report clear and generalisable effects of training, none report control data, and in many cases the reported findings are not supported by statistics. We can, however, tentatively conclude that Multiple Oral Re-reading techniques may have some effect in mild pure alexia where diminished reading speed is the main problem, while Tacile-Kinesthetic training may improve letter identification in more severe cases of alexia. There is, however, still a great need for well-designed and controlled studies of rehabilitation of pure alexia. PMID:23808895

  10. Laser-induced magnesium production from magnesium oxide using reducing agents

    SciTech Connect

    Mohamed, M. S.; Yabe, T.; Baasandash, C.; Sato, Y.; Mori, Y.; Shi-Hua, Liao; Sato, H.; Uchida, S.

    2008-12-01

    Experiments for laser induced production of magnesium (Mg) from magnesium oxide (MgO) using reducing agents (R) were conducted. In these experiments, continuous wave CO{sub 2} focused laser is focused on a mixture of magnesium oxide and reducing agent. High power density of focused laser leads to high temperature and the reduction reaction resulting in Mg production. The resultant vapor is collected on a copper plate and analyzed in terms of magnesium deposition efficiency. Deposition efficiencies with various reducing agents such as Zr, C, and Si have been measured to be 60, 9.2, and 12.1 mg/kJ respectively. An excess addition of reducing agent over their corresponding reaction stoichiometric amounts is found to be optimum condition for the most of performed laser induced reactions. In addition, utilizing solar-pumped laser in Mg production with reducing agent will reduce CO{sub 2} emission and produce magnesium with high-energy efficiency and large throughput.

  11. Thermal conductivities of nanostructured magnesium oxide coatings deposited on magnesium alloys by plasma electrolytic oxidation.

    PubMed

    Shen, Xinwei; Nie, Xueyuan; Hu, Henry

    2014-10-01

    The resistances of magnesium alloys to wear, friction and corrosion can be effectively improved by depositing coatings on their surfaces. However, the coatings can also reduce the heat transfer from the coated components to the surroundings (e.g., coated cylinder bores for internal combustion of engine blocks). In this paper, nanostructured magnesium oxides were produced by plasma electrolytic oxidation (PEO) process on the magnesium alloy AJ62 under different current densities. The guarded comparative heat flow method was adopted to measure the thermal conductivities of such coatings which possess gradient nanoscale grain sizes. The aim of the paper is to explore how the current density in the PEO process affects the thermal conductivity of the nanostructured magnesium coatings. The experimental results show that, as the current density rises from 4 to 20 A/mm2, the thermal conductivity has a slight increase from 0.94 to 1.21 W/m x K, which is significantly smaller than that of the corresponding bulk magnesium oxide materials (29.4 W/m x K). This mostly attributed to the variation of the nanoscale grain sizes of the PEO coatings. PMID:25942897

  12. Chemically prepared lead magnesium niobate dielectrics

    SciTech Connect

    Tuttle, B.A.; Voigt, J.A.; Sipola, D.L.; Olson, W.R.; Goy, D.M.

    1998-11-01

    A chemical solution powder synthesis technique has been developed that produces first, uniform powders of lead magnesium niobate (PMN) with 60 to 80 nm crystallite size. The synthesis technique was based on the dissolution of lead acetate and alkoxide precursors in acetic acid followed by precipitation with oxalic acid/propanol solutions. Lead magnesium niobate ceramics fabricated from these chemically derived powders had smaller, more uniform grain size and higher dielectric constants than ceramics fabricated from mixed oxide powders that were processed under similar thermal conditions. Chem-prep PMN dielectrics with peak dielectric constants greater than 22,000 and polarizations in excess of 29 {micro}C/cm{sup 2} were obtained for 1,100 C firing treatments. Substantial decreases in dielectric constant and polarization were measured for chemically prepared PMN ceramics fired at lower temperatures, consistent with previous work on mixed oxide materials.

  13. Lead magnesium niobate actuator for micropositioning

    DOEpatents

    Swift, C.D.; Bergum, J.W.

    1994-10-25

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated. 3 figs.

  14. Lead magnesium niobate actuator for micropositioning

    DOEpatents

    Swift, Charles D.; Bergum, John W.

    1994-01-01

    An improved lead magnesium niobate actuator is disclosed comprising a cylindrical lead magnesium niobate crystal stack mounted in a cylindrical casing wherein a bias means, such as one or more belleville washers, is located between one end of the crystal stack and a partially closed end of the casing; and adjustment means are provided which bear against the opposite end of the crystal stack, whereby an adjustable compressive force is constantly applied against the crystal stack, whether the crystal stack is actuated in an extended position, or is in an unactuated contracted position. In a preferred embodiment, cooling ports are provided for the circulation of coolant in the actuator to cool the crystal stack, and provision is made for removal and replacement of the crystal stack without disconnecting the actuator from the external device being actuated.

  15. Search for Magnesium Diboride like Binary Superconductors

    NASA Astrophysics Data System (ADS)

    Isikaku-Ironkwe, O. Paul

    2008-03-01

    Efforts to create compounds iso-electronic and iso-structural with magnesium diboride and also superconducting have so far met with limited success. Doping the Mg-site or the B-site have also not yielded higher transition temperatures. They have either been non-superconducting or have lower transition temperatures, Tc. Searching for magnesium diboride-like compounds using the electronegativity of MgB2 (1.7333) has yielded a rich family of potential superconductors. The search has been facilitated using the recently designed ElectroNegativity Spectrum Maps [ENSMaps] of binary systems AxBy. Here we display the potential families. Using the relationship between Tc and atomic mass, we estimate the transition temperatures of the most likely MgB2-like binary superconductors. We also suggest materials that can be doped to give an electronegativity of 1.7333.

  16. Magnesium diboride films on iron substrates

    NASA Astrophysics Data System (ADS)

    Auinger, Michael; Gritzner, Gerhard

    2008-01-01

    The fabrication of superconducting magnesium diboride films on iron substrates with and without buffer layers (Y2O3 stabilized ZrO2 and Al2O3) is reported. Both the boron and the buffer layers were applied via screen-printing. Conversion into the superconducting MgB2 was carried out via vapour transport under Ar/H2 at temperatures around 850 °C in a sealed aluminium oxide crucible together with magnesium as a source material. X-ray diffraction was used to identify the phases formed during the preparation procedure. Smooth films with high critical temperatures of up to 38 K and a narrow transition range of only 1 K were obtained on Y2O3 stabilized ZrO2 or Al2O3 buffered iron substrates.

  17. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    The need to produce lighter components in transportation equipment is the main driver in the increasing demand for magnesium castings. In many automotive applications, components can be made of magnesium or aluminum. While being lighter, often times the magnesium parts have lower impact and fatigue properties than the aluminum. The main objective of this study was to identify potential improvements in the impact resistance of magnesium alloys. The most common magnesium alloys in automotive applications are AZ91D, AM50 and AM60. Accordingly, these alloys were selected as the main candidates for the study. Experimental quantities of these alloys were melted in an electrical furnace under a protective atmosphere comprising sulfur hexafluoride, carbon dioxide and dry air. The alloys were cast both in a permanent mold and in a UBE 315 Ton squeeze caster. Extensive evaluation of tensile, impact and fatigue properties was conducted at CWRU on permanent mold and squeeze cast test bars of AZ91, AM60 and AM50. Ultimate tensile strength values between 20ksi and 30ksi were obtained. The respective elongations varied between 25 and 115. the Charpy V-notch impact strength varied between 1.6 ft-lb and 5 ft-lb depending on the alloy and processing conditions. Preliminary bending fatigue evaluation indicates a fatigue limit of 11-12 ksi for AM50 and AM60. This is about 0.4 of the UTS, typical for these alloys. The microstructures of the cast specimens were investigated with optical and scanning electron microscopy. Concomitantly, a study of the fracture toughness in AM60 was conducted at ORNL as part of the study. The results are in line with values published in the literature and are representative of current state of the art in casting magnesium alloys. The experimental results confirm the strong relationship between aluminum content of the alloys and the mechanical properties, in particular the impact strength and the elongation. As the aluminum content increases from about 5

  18. Lithium-aluminum-magnesium electrode composition

    DOEpatents

    Melendres, Carlos A.; Siegel, Stanley

    1978-01-01

    A negative electrode composition is presented for use in a secondary, high-temperature electrochemical cell. The cell also includes a molten salt electrolyte of alkali metal halides or alkaline earth metal halides and a positive electrode including a chalcogen or a metal chalcogenide as the active electrode material. The negative electrode composition includes up to 50 atom percent lithium as the active electrode constituent and a magnesium-aluminum alloy as a structural matrix. Various binary and ternary intermetallic phases of lithium, magnesium, and aluminum are formed but the electrode composition in both its charged and discharged state remains substantially free of the alpha lithium-aluminum phase and exhibits good structural integrity.

  19. Silica urolithiasis without magnesium trisilicate intake.

    PubMed

    Ichiyanagi, O; Sasagawa, I; Adachi, Y; Suzuki, H; Kubota, Y; Nakada, T

    1998-10-01

    Two cases of silica stones, without previous oral intake of magnesium trisilicate, are reported. A 64-year-old Japanese woman had bilateral renal stones. Infrared spectrophotoscopy revealed that one of the fragments consisted of silicate and the others consisted of calcium oxalate. A 75-year-old woman had right renal stones. The composition of 1 stone was a mixture of silicate and unspecified matrices. Silicate urolithiasis may not necessarily be related to oral intake of silicate-containing antacids. PMID:9792982

  20. Investigation of corrosion behavior of biodegradable magnesium alloys using an online-micro-flow capillary flow injection inductively coupled plasma mass spectrometry setup with electrochemical control

    NASA Astrophysics Data System (ADS)

    Ulrich, A.; Ott, N.; Tournier-Fillon, A.; Homazava, N.; Schmutz, P.

    2011-07-01

    The development of biodegradable metallic materials designed for implants or medical stents is new and is one of the most interesting new fields in material science. Besides biocompatibility, a detailed understanding of corrosion mechanisms and dissolution processes is required to develop materials with tailored degradation behavior. The materials need to be sufficiently stable as long as they have to fulfill their medical task. However, subsequently they should dissolve completely in a controlled manner in terms of maximum body burden. This study focuses on the elemental and time resolved dissolution processes of a magnesium rare earth elements alloy which has been compared to pure magnesium with different impurity level. The here described investigations were performed using a novel analytical setup based on a micro-flow capillary online-coupled via a flow injection system to a plasma mass spectrometer. Differences in element-specific and time-dependent dissolution were monitored for various magnesium alloys in contact with sodium chloride or mixtures of sodium and calcium chloride as corrosive media. The dissolution behavior strongly depends on bulk matrix elements, secondary alloying elements and impurities, which are usually present even in pure magnesium.

  1. Sea water magnesium fuel cell power supply

    NASA Astrophysics Data System (ADS)

    Hahn, Robert; Mainert, Jan; Glaw, Fabian; Lang, K.-D.

    2015-08-01

    An environmentally friendly magnesium fuel cell system using seawater electrolyte and atmospheric oxygen was tested under practical considerations for use as maritime power supply. The hydrogen rate and therefore the power density of the system were increased by a factor of two by using hydrogen evolution cathodes with a gas separation membrane instead of submerged cathodes without gas separation. Commercial magnesium AZ31 rolled sheet anodes can be dissolved in seawater for hydrogen production, down to a thickness below 100 μm thickness, resulting in hydrogen generation efficiency of the anode of over 80%. A practical specific energy/energy density of the alloy of more than 1200 Wh/kg/3000 Wh/l was achieved when coupled to a fuel cell with atmospheric air breathing cathode. The performance of several AZ31 alloy anodes was tested as well as the influence of temperature, electrolyte concentration and anode - cathode separation. The excess hydrogen produced by the magnesium hydrogen evolving cell, due to the negative difference effect, is proportional to the cell current in case of the AZ31 alloys, which simplifies system control considerably. Stable long-term operation of the system was demonstrated at low pressures which can be maintained in an open-seawater-submerged hydrogen generator.

  2. Magnesium Catalysis for the Hydroboration of Carbodiimides.

    PubMed

    Weetman, Catherine; Hill, Michael S; Mahon, Mary F

    2016-05-17

    A β-diketiminato magnesium alkyl complex, [CH{C(Me)NDipp}2 }MgnBu] (Dipp=2,6-iPr2 C6 H3 ), was shown to be an effective pre-catalyst for the first reported catalytic hydroboration of alkyl- and aryl-substituted carbodiimides with pinacol borane (HBpin). The catalytic reactions proceed under mild conditions to afford the corresponding N-borylated formamidine compounds in good yields. The reactions were observed to proceed through the intermediacy of magnesium amidinate and formamidinatoborate intermediates and an example of one of these latter species has been structurally characterised by an X-ray diffraction analysis. Crucially, no formation of the N-boryl formamidine products was observed in the absence of additional equivalents of the carbodiimide and HBpin substrates. This observation, supported by the evolution of a sigmoidal kinetic profile for the hydroboration of dicyclohexylcarbodiimide, has been rationalised as the consequence of an allosteric effect of the pinacol borane and carbodiimide on the magnesium formamidinatoborate intermediates. PMID:27072429

  3. [Magnesium level in human organism during 105-day isolation].

    PubMed

    Piruzian, L A; Protasova, O V; Maksimova, I A; Morukov, B V; Protasov, S V; Ushakov, I B

    2012-01-01

    Total and ionized magnesium in blood serum and in daily urine were determined before (baseline values) and on days 30, 60 and 105 of the experiment with 105-d isolation and confinement (Mars-105)/ Magnesium in hair was investigated before (baseline values) and on day-105 of the experiment. The investigations were performed using atomic emission spectrometry with inductively coupled argon plasma. Changes in magnesium were most significant over the initial 30 days in the experiment. Reduction of serum magnesium was accounted for by the fall in the ionized fraction. In organism magnesium is controlled by the ion-regulatory function of the kidney and varies with individuals. Levels of ionized magnesium in blood serum and excreted with daily urine can serve as indicators of stress resistivity . PMID:23074947

  4. Adsorption of β-carotene on modified magnesium silicate

    NASA Astrophysics Data System (ADS)

    Sun, Shanshan; Guo, Ning; Fu, Yongfeng

    2016-02-01

    Modified flocculation magnesium silicate is prepared by a hydrothermal process at 120°C for 18 h after adding Al2(SO4)3 into the magnesium silicate gel. Compared with standard magnesium silicate with 328.116 m2 g-1 surface area, this modified magnesium silicate has a bigger BET surface area of 536.803 m2 g-1 and a lower interlayer water content. Modified magnesium silicate exhibits high β-carotene adsorption with a maximum adsorption capacity of 364.96 mg g-1. It is shown that when suspended in organic solvent, this material can be used effectively for carotenoid separation. Furthermore, our results suggest that modified magnesium silicate may be a promising candidate as an absorbent in the decoloring of oil.

  5. Magnesium global development: Outcomes from the TMS 2007 annual meeting

    NASA Astrophysics Data System (ADS)

    Beals, Randy S.; Tissington, Cam; Zhang, Xinmin; Kainer, Karl; Petrillo, Joe; Verbrugge, Mark; Pekguleryuz, Mihriban

    2007-08-01

    The magnesium industry is experiencing dramatic growth, due in part to the demands of the automotive industry to improve fuel economy and emissions. As a result, the TMS annual magnesium symposium is one of the fastest-growing subject areas at TMS. In addition, TMS is recognized as the global light metals community’s preeminent forum for the presentation of magnesium science and technological issues. As a focal point of the 2007 TMS Annual Meeting in Orlando, Florida, the TMS Magnesium Committee held its first plenary session with expert representatives from around the world. In order to address the surge in magnesium technology in recent years, the TMS Magnesium Globalization plenary session included a variety of subjects that ranged from economic to technical.

  6. Effects of magnesium deficiency--more than skin deep.

    PubMed

    Chandrasekaran, Navin Chandrakanth; Weir, Christopher; Alfraji, Sumaya; Grice, Jeff; Roberts, Michael S; Barnard, Ross T

    2014-10-01

    Dead Sea and magnesium salt therapy are two of the oldest forms of treatment for skin disease and several other disorders, supported by a body of largely anecdotal evidence. In this paper we review possible pathways for penetration of magnesium ions through the epidermis to reach the circulation, in turn replenishing cellular magnesium levels. We also discuss mechanisms for intercellular movement of magnesium ions and possible mechanisms for the interaction between magnesium ions and inflammatory mediators. Upon addition of magnesium ions in vitro, the expression of inflammatory mediators such as tumour necrosis factor α (TNFα) and nuclear factor κβ (NFκβ) is down regulated. Dysregulation of these and other inflammatory mediators has been linked to several inflammatory disorders, including asthma, arthritis, atherosclerosis and neuroinflammation. PMID:24928863

  7. Protective layer formation on magnesium in cell culture medium.

    PubMed

    Wagener, V; Virtanen, S

    2016-06-01

    In the past, different studies showed that hydroxyapatite (HA) or similar calcium phosphates can be precipitated on Mg during immersion in simulated body fluids. However, at the same time, in most cases a dark grey or black layer is built under the white HA crystals. This layer seems to consist as well of calcium phosphates. Until now, neither the morphology nor its influence on Mg corrosion have been investigated in detail. In this work commercially pure magnesium (cp) was immersed in cell culture medium for one, three and five days at room temperature and in the incubator (37 °C, 5% CO2). In addition, the influence of proteins on the formation of a corrosion layer was investigated by adding 20% of fetal calf serum (FCS) to the cell culture medium in the incubator. In order to analyze the formed layers, SEM images of cross sections, X-ray Photoelectron Spectroscopy (XPS), X-ray diffraction (XRD), Energy Dispersive X-ray Spectroscopy (EDX) and Fourier Transformed Infrared Spectroscopy (FTIR) measurements were carried out. Characterization of the corrosion behavior was achieved by electrochemical impedance spectroscopy (EIS) and by potentio-dynamic polarization in Dulbecco's Modified Eagle's Medium (DMEM) at 37°C. Surface analysis showed that all formed layers consist mainly of amorphous calcium phosphate compounds. For the immersion at room temperature the Ca/P ratio indicates the formation of HA, while in the incubator probably pre-stages to HA are formed. The different immersion conditions lead to a variation in layer thicknesses. However, electrochemical characterization shows that the layer thickness does not influence the corrosion resistance of magnesium. The main influencing factor for the corrosion behavior is the layer morphology. Thus, immersion at room temperature leads to the highest corrosion protection due to the formation of a compact outer layer. Layers formed in the incubator show much worse performances due to completely porous structures. The

  8. Reversible Dehydrogenation of Magnesium Borohydride to Magnesium Triborane in the Solid State Under Moderate Conditions

    SciTech Connect

    Chong, Marina; Karkamkar, Abhijeet J.; Autrey, Thomas; Orimo, Shin-ichi; Jalisatgi, Satish; Jensen, Craig M.

    2011-02-17

    Thermal decomposition of magnesium borohydride, Mg(BH4)2, in the solid state was studied by a combination of PCT, TGA/MS and NMR spectroscopy. Dehydrogenation of Mg(BH4)2 at 200 °C, results in the highly selective formation of magnesium triborane, Mg(B3H8)2. This process is reversible at 250 °C under 120 atm H2. Dehydrogenation at higher temperature, > 300 °C, produces a complex mixture of polyborane species. Solution phase 11B NMR spectra of the hydrolyzed decomposition products reveals the formation of the B3H8 anion, boric acid from hydrolysis of the unstable polyboranes (BnHx) (n = 3-11, x >8), and the closoborane B12H12 dianion as a minor product. A BH condensation mechanism involving metal hydride formation is proposed to explain the limited reversible hydrogen storage in magnesium borohydride.

  9. Initial observations on using magnesium metal in peripheral nerve repair.

    PubMed

    Vennemeyer, J J; Hopkins, T; Hershcovitch, M; Little, K D; Hagen, M C; Minteer, D; Hom, D B; Marra, K; Pixley, S K

    2015-03-01

    Biodegradable magnesium metal filaments placed inside biodegradable nerve conduits might provide the physical guidance support needed to improve the rate and extent of regeneration of peripheral nerves across injury gaps. In this study, we examined basic issues of magnesium metal resorption and biocompatibility by repairing sub-critical size gap injuries (6 mm) in one sciatic nerve of 24 adult male Lewis rats. Separated nerve stumps were connected with poly(caprolactone) nerve conduits, with and without magnesium filaments (0.25 mm diameter, 10 mm length), with two different conduit filler substances (saline and keratin hydrogel). At 6 weeks after implantation, magnesium degradation was examined by micro-computed tomography and histological analyses. Magnesium degradation was significantly greater when the conduits were filled with an acidic keratin hydrogel than with saline (p < 0.05). But magnesium filaments in some animals remained intact for 6 weeks. Using histological and immunocytochemical analyses, good biocompatibility of the magnesium implants was observed at 6 weeks, as shown by good development of regenerating nerve mini-fascicles and only mild inflammation in tissues even after complete degradation of the magnesium. Nerve regeneration was not interrupted by complete magnesium degradation. An initial functional evaluation, determination of size recovery of the gastrocnemius muscle, showed a slight improvement due to magnesium with the saline but not the keratin filler, compared with respective control conduits without magnesium. These results suggest that magnesium filament implants have the potential to improve repair of injured peripheral nerve defects in this rodent model. PMID:25281648

  10. Impurity control and corrosion resistance of magnesium-aluminum alloy

    SciTech Connect

    Liu, M.; Song, GuangLing

    2013-01-01

    The corrosion resistance of magnesium alloys is very sensitive to the contents of impurity elements such as iron. In this study, a series of diecast AXJ530 magnesium alloy samples were prepared with additions of Mn and Fe. Through a comprehensive phase diagram calculation and corrosion evaluation, the mechanisms for the tolerance limit of Fe in magnesium alloy are discussed. This adds a new dimension to control the alloying impurity in terms of alloying composition design and casting conditions.

  11. Design Considerations of a Condensing System for Vaporized Magnesium

    NASA Technical Reports Server (NTRS)

    Witzke, Walter R; Prok, George M; Keller, Thomas A

    1955-01-01

    The effect of the design characteristics of various condensing chambers on magnesium build-up at the chamber inlet was investigated. The condensing chambers are used in the vapor-condensation process for making magnesium slurries. A complete description of the various chamber designs and the procedure used in testing the chambers is given. The results are evaluated on the basis of clogging and total magnesium distilled per run. Orifice design was also considered.

  12. Stability of Fe,Al-bearing bridgmanite in the lower mantle and synthesis of pure Fe-bridgmanite

    PubMed Central

    Ismailova, Leyla; Bykova, Elena; Bykov, Maxim; Cerantola, Valerio; McCammon, Catherine; Boffa Ballaran, Tiziana; Bobrov, Andrei; Sinmyo, Ryosuke; Dubrovinskaia, Natalia; Glazyrin, Konstantin; Liermann, Hanns-Peter; Kupenko, Ilya; Hanfland, Michael; Prescher, Clemens; Prakapenka, Vitali; Svitlyk, Volodymyr; Dubrovinsky, Leonid

    2016-01-01

    The physical and chemical properties of Earth’s mantle, as well as its dynamics and evolution, heavily depend on the phase composition of the region. On the basis of experiments in laser-heated diamond anvil cells, we demonstrate that Fe,Al-bearing bridgmanite (magnesium silicate perovskite) is stable to pressures over 120 GPa and temperatures above 3000 K. Ferric iron stabilizes Fe-rich bridgmanite such that we were able to synthesize pure iron bridgmanite at pressures between ~45 and 110 GPa. The compressibility of ferric iron–bearing bridgmanite is significantly different from any known bridgmanite, which has direct implications for the interpretation of seismic tomography data. PMID:27453945

  13. Stability of Fe,Al-bearing bridgmanite in the lower mantle and synthesis of pure Fe-bridgmanite.

    PubMed

    Ismailova, Leyla; Bykova, Elena; Bykov, Maxim; Cerantola, Valerio; McCammon, Catherine; Boffa Ballaran, Tiziana; Bobrov, Andrei; Sinmyo, Ryosuke; Dubrovinskaia, Natalia; Glazyrin, Konstantin; Liermann, Hanns-Peter; Kupenko, Ilya; Hanfland, Michael; Prescher, Clemens; Prakapenka, Vitali; Svitlyk, Volodymyr; Dubrovinsky, Leonid

    2016-07-01

    The physical and chemical properties of Earth's mantle, as well as its dynamics and evolution, heavily depend on the phase composition of the region. On the basis of experiments in laser-heated diamond anvil cells, we demonstrate that Fe,Al-bearing bridgmanite (magnesium silicate perovskite) is stable to pressures over 120 GPa and temperatures above 3000 K. Ferric iron stabilizes Fe-rich bridgmanite such that we were able to synthesize pure iron bridgmanite at pressures between ~45 and 110 GPa. The compressibility of ferric iron-bearing bridgmanite is significantly different from any known bridgmanite, which has direct implications for the interpretation of seismic tomography data. PMID:27453945

  14. Joint solubility of samarium and dysprosium in solid magnesium

    NASA Astrophysics Data System (ADS)

    Rokhlin, L. L.; Dobatkina, T. V.; Lukyanova, E. A.; Korolkova, I. G.; Tarytina, I. E.

    2016-03-01

    The phase compositions of solid Mg-Sm-Dy alloys corresponding to the magnesium-corner region of the phase diagram are studied by optical and scanning electron microscopy, electrical resistivity measurements, and electron microprobe analysis. The obtained results allowed us to determine the joint solubility of samarium and dysprosium in solid magnesium at 500, 400, and 300°C; it decreases with decreasing temperature. The magnesium solid solution is found to be in equilibrium only with the Mg41Sm5 and Mg24Dy5 compounds, which are in equilibrium with the magnesium solid solution in the binary Mg-Sm and Mg-Dy systems.

  15. Improved biological performance of magnesium by micro-arc oxidation

    PubMed Central

    Ma, W.H.; Liu, Y.J.; Wang, W.; Zhang, Y.Z.

    2014-01-01

    Magnesium and its alloys have recently been used in the development of lightweight, biodegradable implant materials. However, the corrosion properties of magnesium limit its clinical application. The purpose of this study was to comprehensively evaluate the degradation behavior and biomechanical properties of magnesium materials treated with micro-arc oxidation (MAO), which is a new promising surface treatment for developing corrosion resistance in magnesium, and to provide a theoretical basis for its further optimization and clinical application. The degradation behavior of MAO-treated magnesium was studied systematically by immersion and electrochemical tests, and its biomechanical performance when exposed to simulated body fluids was evaluated by tensile tests. In addition, the cell toxicity of MAO-treated magnesium samples during the corrosion process was evaluated, and its biocompatibility was investigated under in vivo conditions. The results of this study showed that the oxide coating layers could elevate the corrosion potential of magnesium and reduce its degradation rate. In addition, the MAO-coated sample showed no cytotoxicity and more new bone was formed around it during in vivo degradation. MAO treatment could effectively enhance the corrosion resistance of the magnesium specimen and help to keep its original mechanical properties. The MAO-coated magnesium material had good cytocompatibility and biocompatibility. This technique has an advantage for developing novel implant materials and may potentially be used for future clinical applications. PMID:25517917

  16. Magnesium deficiency accelerates cellular senescence in cultured human fibroblasts.

    PubMed

    Killilea, David W; Ames, Bruce N

    2008-04-15

    Magnesium inadequacy affects more than half of the U.S. population and is associated with increased risk for many age-related diseases, yet the underlying mechanisms are unknown. Altered cellular physiology has been demonstrated after acute exposure to severe magnesium deficiency, but few reports have addressed the consequences of long-term exposure to moderate magnesium deficiency in human cells. Therefore, IMR-90 human fibroblasts were continuously cultured in magnesium-deficient conditions to determine the long-term effects on the cells. These fibroblasts did not demonstrate differences in cellular viability or plating efficiency but did exhibit a decreased replicative lifespan in populations cultured in magnesium-deficient compared with standard media conditions, both at ambient (20% O(2)) and physiological (5% O(2)) oxygen tension. The growth rates for immortalized IMR-90 fibroblasts were not affected under the same conditions. IMR-90 fibroblast populations cultured in magnesium-deficient conditions had increased senescence-associated beta-galactosidase activity and increased p16(INK4a) and p21(WAF1) protein expression compared with cultures from standard media conditions. Telomere attrition was also accelerated in cell populations from magnesium-deficient cultures. Thus, the long-term consequence of inadequate magnesium availability in human fibroblast cultures was accelerated cellular senescence, which may be a mechanism through which chronic magnesium inadequacy could promote or exacerbate age-related disease. PMID:18391207

  17. Rapid recovery from major depression using magnesium treatment.

    PubMed

    Eby, George A; Eby, Karen L

    2006-01-01

    Major depression is a mood disorder characterized by a sense of inadequacy, despondency, decreased activity, pessimism, anhedonia and sadness where these symptoms severely disrupt and adversely affect the person's life, sometimes to such an extent that suicide is attempted or results. Antidepressant drugs are not always effective and some have been accused of causing an increased number of suicides particularly in young people. Magnesium deficiency is well known to produce neuropathologies. Only 16% of the magnesium found in whole wheat remains in refined flour, and magnesium has been removed from most drinking water supplies, setting a stage for human magnesium deficiency. Magnesium ions regulate calcium ion flow in neuronal calcium channels, helping to regulate neuronal nitric oxide production. In magnesium deficiency, neuronal requirements for magnesium may not be met, causing neuronal damage which could manifest as depression. Magnesium treatment is hypothesized to be effective in treating major depression resulting from intraneuronal magnesium deficits. These magnesium ion neuronal deficits may be induced by stress hormones, excessive dietary calcium as well as dietary deficiencies of magnesium. Case histories are presented showing rapid recovery (less than 7 days) from major depression using 125-300 mg of magnesium (as glycinate and taurinate) with each meal and at bedtime. Magnesium was found usually effective for treatment of depression in general use. Related and accompanying mental illnesses in these case histories including traumatic brain injury, headache, suicidal ideation, anxiety, irritability, insomnia, postpartum depression, cocaine, alcohol and tobacco abuse, hypersensitivity to calcium, short-term memory loss and IQ loss were also benefited. Dietary deficiencies of magnesium, coupled with excess calcium and stress may cause many cases of other related symptoms including agitation, anxiety, irritability, confusion, asthenia, sleeplessness

  18. Magnesium, aluminum and lead in various brain areas

    SciTech Connect

    Zumkley, H.; Bertram, H.P.; Brandt, M.; Roedig, M.; Spieker, C.

    1986-01-01

    Whereas the lead concentrations were increased in brain tissue of patients with chronic alcoholism, the aluminum concentrations remained within the normal range. The magnesium concentrations were found decreased in patients with chronic alcoholism compared to normal controls. The sources for the elevated lead levels seem to be the increased intake of alcohol. The decreased magnesium levels are probably caused by an increased loss of magnesium with the urine, malnutrition, malabsorption, hormonal factors and drugs. Various neurological disorders which often accompanied chronic alcoholism may be caused or aggravated by lead encephalopathy and hypomagnesemia. Therapeutical implications may be the early substitution of magnesium deficiency in chronic alcoholism. 10 references, 5 figures.

  19. Improved biological performance of magnesium by micro-arc oxidation.

    PubMed

    Ma, W H; Liu, Y J; Wang, W; Zhang, Y Z

    2015-03-01

    Magnesium and its alloys have recently been used in the development of lightweight, biodegradable implant materials. However, the corrosion properties of magnesium limit its clinical application. The purpose of this study was to comprehensively evaluate the degradation behavior and biomechanical properties of magnesium materials treated with micro-arc oxidation (MAO), which is a new promising surface treatment for developing corrosion resistance in magnesium, and to provide a theoretical basis for its further optimization and clinical application. The degradation behavior of MAO-treated magnesium was studied systematically by immersion and electrochemical tests, and its biomechanical performance when exposed to simulated body fluids was evaluated by tensile tests. In addition, the cell toxicity of MAO-treated magnesium samples during the corrosion process was evaluated, and its biocompatibility was investigated under in vivo conditions. The results of this study showed that the oxide coating layers could elevate the corrosion potential of magnesium and reduce its degradation rate. In addition, the MAO-coated sample showed no cytotoxicity and more new bone was formed around it during in vivo degradation. MAO treatment could effectively enhance the corrosion resistance of the magnesium specimen and help to keep its original mechanical properties. The MAO-coated magnesium material had good cytocompatibility and biocompatibility. This technique has an advantage for developing novel implant materials and may potentially be used for future clinical applications. PMID:25517917

  20. Nokia PureView oversampling technology

    NASA Astrophysics Data System (ADS)

    Vuori, Tero; Alakarhu, Juha; Salmelin, Eero; Partinen, Ari

    2013-03-01

    This paper describes Nokia's PureView oversampling imaging technology as well as the product, Nokia 808 PureView, featuring it. The Nokia PureView imaging technology is the combination of a large, super high resolution 41Mpix with high performance Carl Zeiss optics. Large sensor enables a pixel oversampling technique that reduces an image taken at full resolution into a lower resolution picture, thus achieving higher definition and light sensitivity. One oversampled super pixel in image file is formed by using many sensor pixels. A large sensor enables also a lossless zoom. If a user wants to use the lossless zoom, the sensor image is cropped. However, up-scaling is not needed as in traditional digital zooming usually used in mobile devices. Lossless zooming means image quality that does not have the digital zooming artifacts as well as no optical zooming artifacts like zoom lens system distortions. Zooming with PureView is also completely silent. PureView imaging technology is the result of many years of research and development and the tangible fruits of this work are exceptional image quality, lossless zoom, and superior low light performance.

  1. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies...

  2. 40 CFR 461.60 - Applicability; description of the magnesium subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... magnesium subcategory. 461.60 Section 461.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS BATTERY MANUFACTURING POINT SOURCE CATEGORY Magnesium Subcategory § 461.60 Applicability; description of the magnesium subcategory. This subpart applies...

  3. Quantum-mechanical calculations and spectroscopic characteristics of magnesium glutamate glycine and magnesium glutamate arginine

    NASA Astrophysics Data System (ADS)

    Marcoin, W.; Pasterny, K.; Pasterna, G.; Wrzalik, R.

    2006-07-01

    Theoretical calculations of magnesium glutamate-glycine ([Mg(glu-gly)]) and magnesium glutamate-arginine ([Mg(glu-arg)]) structures and their spectroscopic characteristics have been performed in the gas phase with the GAUSSIAN 98 software package using density functional theory (DFT) at the B3PW91 level. The 6-31+G* basis set was selected due to their reasonable quality and size. NMR and IR measurements were carried out and obtained experimental 1H and 13C chemical shifts and IR spectra are compared with calculated spectral parameters.

  4. Rechargeable Magnesium Batteries: Low-Cost Rechargeable Magnesium Batteries with High Energy Density

    SciTech Connect

    2010-10-01

    BEEST Project: Pellion Technologies is developing rechargeable magnesium batteries that would enable an EV to travel 3 times farther than it could using Li-ion batteries. Prototype magnesium batteries demonstrate excellent electrochemical behavior; delivering thousands of charge cycles with very little fade. Nevertheless, these prototypes have always stored too little energy to be commercially viable. Pellion Technologies is working to overcome this challenge by rapidly screening potential storage materials using proprietary, high-throughput computer models. To date, 12,000 materials have been identified and analyzed. The resulting best materials have been electrochemically tested, yielding several very promising candidates.

  5. In vitro and in vivo comparison of binary Mg alloys and pure Mg.

    PubMed

    Myrissa, Anastasia; Agha, Nezha Ahmad; Lu, Yiyi; Martinelli, Elisabeth; Eichler, Johannes; Szakács, Gábor; Kleinhans, Claudia; Willumeit-Römer, Regine; Schäfer, Ute; Weinberg, Annelie-Martina

    2016-04-01

    Biodegradable materials are under investigation due to their promising properties for biomedical applications as implant material. In the present study, two binary magnesium (Mg) alloys (Mg2Ag and Mg10Gd) and pure Mg (99.99%) were used in order to compare the degradation performance of the materials in in vitro to in vivo conditions. In vitro analysis of cell distribution and viability was performed on discs of pure Mg, Mg2Ag and Mg10Gd. The results verified viable pre-osteoblast cells on all three alloys and no obvious toxic effect within the first two weeks. The degradation rates in in vitro and in vivo conditions (Sprague-Dawley® rats) showed that the degradation rates differ especially in the 1st week of the experiments. While in vitro Mg2Ag displayed the fastest degradation rate, in vivo, Mg10Gd revealed the highest degradation rate. After four weeks of in vitro immersion tests, the degradation rate of Mg2Ag was significantly reduced and approached the values of pure Mg and Mg10Gd. Interestingly, after 4 weeks the estimated in vitro degradation rates approximate in vivo values. Our systematic experiment indicates that a correlation between in vitro and in vivo observations still has some limitations that have to be considered in order to perform representative in vitro experiments that display the in vivo situation. PMID:26838918

  6. Improve efficiency of perovskite solar cells by using Magnesium doped ZnO and TiO2 compact layers

    NASA Astrophysics Data System (ADS)

    Baktash, Ardeshir; Amiri, Omid; Sasani, Alireza

    2016-05-01

    Here the effect of Magnesium doped TiO2 and ZnO as hole blocking layers (HBLs) are investigated by using solar cell capacitance simulator (SCAPS). The Impact of Magnesium concentration into the TiO2 and ZnO and effect of operating temperature on the performance of the perovskite solar cell are investigated. Best cell performance for both TiO2 and ZnO HBLs (with cell efficiencies of 19.86% and 19.57% respectively) are concluded for the doping level of 10% of Mg into the structure of HBLs. Increase in operating temperature from 300 K to 400 K are decreased the performance of the perovskite solar cell with both pure and Mg-doped HBLs. However, the cells with pure ZnO layer and with Zn0.9 Mg0.1O layer show the highest (with a decline of 8.88% in efficiency) and the lowest stability (with a decline of 50.49% in efficiency) at higher temperatures respectively. Moreover, the cell with Ti0.9 Mg0.1O2 layer shows better stability (with 21.85% reduction in efficiency) than the cell with pure TiO2 compact layer (with 23.28% reduction in efficiency) at higher operating temperatures.

  7. Stationary storage and purification of hydrogen using nickel-coated magnesium powder. Final technical report

    SciTech Connect

    1999-12-30

    The following conclusions were reached: (1) The concept of a coating on a magnesium particle serving as a well-supported hydrogen-permselective membrane is sound. (2) Magnesium nitride can be made to coat magnesium particles through chemical vapor deposition within a fluidized bed. (3) Magnesium nitride exhibits the properties necessary for such a coating. (4) Magnesium nitride is not chemically inert to hydrogen in the absence of ammonia at temperatures typically used to hydride/dehydride magnesium.

  8. [Study of pure titanium electrolytic polishing].

    PubMed

    Morita, N

    1990-03-01

    This study attempted to polish pure titanium test pieces electrolytically to mirror surface at the size of cast denture frames. Electrolytic polishing of pure titanium could be done on an area of 30 cm2 with a non-aqueous electrolyte. Small pure titanium plates could be polished electrolytically, but a uniformly smooth surface could not be obtained easily with large testpiece. The optimal electrolytic conditions were 30 V for 6 min at 25 degrees C using a solution consisting of 70 ml ethyl alcohol, 30 ml iso-propyl alcohol, 6 g aluminum chloride, and 25 g zinc chloride. The solution was safe and had less restriction of frequency of use. PMID:2135513

  9. Engineering arbitrary pure and mixed quantum states

    SciTech Connect

    Pechen, Alexander

    2011-10-15

    Controlled manipulation by atomic- and molecular-scale quantum systems has attracted a lot of research attention in recent years. A fundamental problem is to provide deterministic methods for controlled engineering of arbitrary quantum states. This work proposes a deterministic method for engineering arbitrary pure and mixed states of a wide class of quantum systems. The method exploits a special combination of incoherent and coherent controls (incoherent and coherent radiation) and has two properties which are specifically important for manipulating by quantum systems: it realizes the strongest possible degree of their state control, complete density matrix controllability, meaning the ability to steer arbitrary pure and mixed initial states into any desired pure or mixed final state, and it is all-to-one, such that each particular control transfers all initial system states into one target state.

  10. Surface vibrational spectroscopy of pure liquids

    SciTech Connect

    Superfine, R.; Huang, J.Y.; Du, Q.; Shen, Y.R.

    1991-03-01

    We report the use of infrared visible sum frequency generation (SFG) to obtain the surface vibrational spectra of pure liquid methanol and water. These are the first surface vibrational spectra ever obtained for pure liquids. We have also deduced from the SFG results the absolute orientations of molecules at the pure liquid/vapor interface. The surface methanol molecules appear to have their CH{sub 3} groups projecting out of the liquid in agreement with the theoretical prediction. For the orientation of surface water molecules, however, different calculations have yielded very different predictions. Our SFG measurement provides clear evidence that the molecules are oriented with an unbonded hydrogen projecting out of the liquid. 9 refs., 3 figs.

  11. Pure neuritic leprosy: Current status and relevance.

    PubMed

    Rao, P Narasimha; Suneetha, Sujai

    2016-01-01

    Pure neuritic leprosy has always been an enigma due to its clinical and management ambiguities. Although only the Indian Association of Leprologist's classification recognizes 'pure neuritic leprosy' as a distinct sub group of leprosy, cases nonetheless are reported from various countries of Asia, Africa, South America and Europe, indicating its global relevance. It is important to maintain pure neuritic leprosy as a subgroup as it constitutes a good percentage of leprosy cases reported from India, which contributes to more than half of global leprosy numbers. Unfortunately, a high proportion of these patients present with Grade 2 disability at the time of initial reporting itself due to the early nerve involvement. Although skin lesions are absent by definition, when skin biopsies were performed from the skin along the distribution of the affected nerve, a proportion of patients demonstrated leprosy pathology, revealing sub-clinical skin involvement. In addition on follow-up, skin lesions are noted to develop in up to 20% of pure neuritic leprosy cases, indicating its progression to manifest cutaneous disease. Over the decades, the confirmation of diagnosis of pure neuritic leprosy has been subjective, however, with the arrival and use of high-resolution ultrasonography (HRUS) for nerve imaging, we have a tool not only to objectively measure and record the nerve thickening but also to assess the morphological alterations in the nerve including echo texture, fascicular pattern and vascularity. Management of pure neuritic leprosy requires multidrug therapy along with appropriate dose of systemic corticosteroids, for both acute and silent neuritis. Measures for pain relief, self-care of limbs and physiotherapy are important to prevent as well as manage disabilities in this group of patients. PMID:27088926

  12. BRST and the pure spinor formalism

    SciTech Connect

    Garcia, J. Antonio

    2008-03-06

    The aim of this talk is to show the relation between the standard BRST approach of the GS superstring with the quantization technics used in the pure spinor approach to superstring. To that end we will use the Batalin-Fradkin-Tyutin (BFT) conversion program of second class constraints to first class constraints in the GS superstring using light cone coordinates. By applying this systematic procedure we were able to obtain a gauge system that is equivalent to the recent model proposed in [1] to relate the GS superstring to the pure spinor formalism.

  13. Ignition and Combustion Characteristics of Pure Bulk Metals: Normal-Gravity Test Results

    NASA Technical Reports Server (NTRS)

    Abbud-Madrid, A.; Fiechtner, G. J.; Branch, M. C.; Daily, J. W.

    1994-01-01

    An experimental apparatus has been designed for the study of bulk metal ignition under elevated, normal and reduced gravity environments. The present work describes the technical characteristics of the system, the analytical techniques employed, the results obtained from the ignition of a variety of metals subjected to normal gravity conditions and the first results obtained from experiments under elevated gravity. A 1000 W xenon short-arc lamp is used to irradiate the top surface of a cylindrical metal specimen 4 mm in diameter and 4 mm high in a quiescent pure-oxygen environment at 0.1 MPa. Iron, titanium, zirconium, magnesium, zinc, tin, and copper specimens are investigated. All these metals exhibit ignition and combustion behavior varying in strength and speed. Values of ignition temperatures below, above or in the range of the metal melting point are obtained from the temperature records. The emission spectra from the magnesium-oxygen gas-phase reaction reveals the dynamic evolution of the ignition event. Scanning electron microscope and x-ray spectroscopic analysis provide the sequence of oxide formation on the burning of copper samples. Preliminary results on the effect of higher-than-normal gravity levels on the ignition of titanium specimens is presented.

  14. Molecular tectonics: from enantiomerically pure sugars to enantiomerically pure triple stranded helical coordination network.

    PubMed

    Grosshans, Philippe; Jouaiti, Abdelaziz; Bulach, Véronique; Planeix, Jean-Marc; Hosseini, Mir Wais; Nicoud, Jean-François

    2003-06-21

    The self-assembly between a bis-monodentate tecton based on two pyridine units connected to an enantiomerically pure isomannide stereoisomer and HgCl2 leads to the formation of an enantiomerically pure triple stranded helical infinite coordination network which was structurally characterised by X-ray diffraction on single crystal. PMID:12841229

  15. Magnesium and metabolic syndrome: The role of magnesium in health and disease

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Metabolic syndrome is a constellation of conditions associated with elevated risk of diabetes and cardiovascular disease. Magnesium, the fourth most abundant cation in the human body and required in over 300 enzymatic reactions, has been shown in experimental, observational, and clinical studies to ...

  16. Magnesium isotope fractionation during hydrous magnesium carbonate precipitation with and without cyanobacteria

    NASA Astrophysics Data System (ADS)

    Mavromatis, Vasileios; Pearce, Christopher R.; Shirokova, Liudmila S.; Bundeleva, Irina A.; Pokrovsky, Oleg S.; Benezeth, Pascale; Oelkers, Eric H.

    2012-01-01

    The hydrous magnesium carbonates, nesquehonite (MgCO 3·3H 2O) and dypingite (Mg 5(CO 3) 4(OH) 2·5(H 2O)), were precipitated at 25 °C in batch reactors from aqueous solutions containing 0.05 M NaHCO 3 and 0.025 M MgCl 2 and in the presence and absence of live photosynthesizing Gloeocapsa sp. cyanobacteria. Experiments were performed under a variety of conditions; the reactive fluid/bacteria/mineral suspensions were continuously stirred, and/or air bubbled in most experiments, and exposed to various durations of light exposure. Bulk precipitation rates are not affected by the presence of bacteria although the solution pH and the degree of fluid supersaturation with respect to magnesium carbonates increase due to photosynthesis. Lighter Mg isotopes are preferentially incorporated into the precipitated solids in all experiments. Mg isotope fractionation between the mineral and fluid in the abiotic experiments is identical, within uncertainty, to that measured in cyanobacteria-bearing experiments; measured δ 26Mg ranges from -1.54‰ to -1.16‰ in all experiments. Mg isotope fractionation is also found to be independent of reactive solution pH and Mg, CO 32-, and biomass concentrations. Taken together, these observations suggest that Gloeocapsa sp. cyanobacterium does not appreciably affect magnesium isotope fractionation between aqueous fluid and hydrous magnesium carbonates.

  17. Oral administration of lithium increases tissue magnesium contents but not plasma magnesium level in rats.

    PubMed

    Kiełczykowska, Małgorzata; Musik, Irena; Hordyjewska, Anna; Boguszewska, Anna; Lewandowska, Anna; Pasternak, Kazimierz

    2007-01-01

    The aim of this work was to determine the influence of different doses of lithium on magnesium concentration in plasma and tissues of rats. For a period of eight weeks rats had been provided with aqueous solutions of Li(2)CO(3) whose concentrations were established as follows: 0.7; 1.4; 2.6; 3.6; 7.1; 10.7 mmol Li(+)/l. Magnesium concentration was determined in plasma and tissue supernatants. Lithium caused no changes in magnesium concentration in plasma, whereas Mg concentration in tissues was found to be enhanced, although the degree of the increment depended on the studied tissue. In the liver, brain and heart muscle, the increase was statistically insignificant vs. control. In the kidney, the higher Li doses were required to result in the significant Mg enhancement, whereas in femoral muscle all the used doses caused well-marked Mg increase vs. control. Positive correlations between average daily Li intake and tissue Mg concentration in the kidney (r = 0.650) and femoral muscle (r = 0.696) were found. In conclusion, the present study indicates that the different Li doses disturbed tissue homeostasis of magnesium. The increase in Mg tissue concentration, observed in groups receiving higher Li doses can influence nervous-muscular excitability. PMID:17652829

  18. High concentration magnesium borohydride/tetraglyme electrolyte for rechargeable magnesium batteries

    NASA Astrophysics Data System (ADS)

    Tuerxun, Feilure; Abulizi, Yasen; NuLi, Yanna; Su, Shuojian; Yang, Jun; Wang, JiuLin

    2015-02-01

    High concentration magnesium borohydride/tetraglyme electrolyte for rechargeable magnesium batteries is simply prepared by dissolving inorganic magnesium salt Mg(BH4) in tetraglyme (TG) ether solvent with good safety. 90 °C heating treatment is performed in the preparation process and LiBH4 as a chelating agent is added to improve the electrochemical performance. Mg deposition-dissolution performance and the electrochemical window of the electrolyte on non-inert stainless steel (SS), nickel (Ni), copper (Cu) electrodes and inert platinum (Pt) electrode are systematically studied by cyclic voltammetry and constant current discharge-charge measurements. 0.5 mol L-1 heated Mg(BH4)2/LiBH4/TG ([LiBH4] = 1.5 mol L-1) solution shows good electrochemical performance with 2.4 V (vs. Mg RE) anodic stability on stainless steel, close to 100% Mg deposition/dissolution efficiency and high cycling reversibility. Furthermore, the reversible electrochemical process of Mg intercalation into Mo6S8 cathode with excellent cycling performance in the electrolyte indicates the feasible application in rechargeable magnesium batteries.

  19. Temporal Ventriloquism in a Purely Temporal Context

    ERIC Educational Resources Information Center

    Hartcher-O'Brien, Jessica; Alais, David

    2011-01-01

    This study examines how audiovisual signals are combined in time for a temporal analogue of the ventriloquist effect in a purely temporal context, that is, no spatial grounding of signals or other spatial facilitation. Observers were presented with two successive intervals, each defined by a 1250-ms tone, and indicated in which interval a brief…

  20. Thrust Measurement of Pure Magnetic Sail

    NASA Astrophysics Data System (ADS)

    Ueno, Kazuma; Kimura, Toshiyuki; Ayabe, Tomohiro; Funaki, Ikkoh; Yamakawa, Hiroshi; Horisawa, Hideyuki

    A Pure Magnetic Sail is a deep space propulsion system consisting of a coil mounted on a spacecraft. In order to predict the thrust characteristics of a Pure Magnetic Sail in space, thrust measurement and magnetic field measurement were conducted using a scale model in a laboratory. To simulate the solar wind, a magnetoplasmadynamic arcjet provides a high density (2×1019 m-3) and high velocity (47 km/s) plasma flow that impinges on a 20-turn 25-mm-radius coil simulating a Pure Magnetic Sail. When the magnetic cavity size of the scale model (L) is increased from 0.12 to 0.17 m, the thrust increases from 0.47 to 0.92 N. Scaling up, this experiment corresponds to a 300-km diameter Pure Magnetic Sail in space. The thrust also depends on the coil tilt angle, which is the angle between the direction of the solar wind flow and the coil axis. The maximum thrust of 1.5 N is obtained for a tilt angle of 90 degrees.

  1. Implicit Reading in Chinese Pure Alexia

    ERIC Educational Resources Information Center

    Shan, Chunlei; Zhu, Renjing; Xu, Mingwei; Luo, Benyan; Weng, Xuchu

    2010-01-01

    A number of recent studies have shown that some patients with pure alexia display evidence of implicit access to lexical and semantic information about words that they cannot read explicitly. This phenomenon has not been investigated systematically in Chinese patients. We report here a case study of a Chinese patient who met the criteria for pure…

  2. Exploring the simplest purely baryonic decay processes

    NASA Astrophysics Data System (ADS)

    Geng, C. Q.; Hsiao, Y. K.; Rodrigues, Eduardo

    2016-07-01

    Though not considered in general, purely baryonic decays could shed light on the puzzle of the baryon number asymmetry in the universe by means of a better understanding of the baryonic nature of our matter world. As such, they constitute a yet unexplored class of decay processes worth investigating. We propose to search for purely baryonic decay processes at the LHCb experiment. No such type of decay has ever been observed. In particular, we concentrate on the decay Λb0→p p ¯n , which is the simplest purely baryonic decay mode, with solely spin-1 /2 baryons involved. We predict its decay branching ratio to be B (Λb0→p p ¯ n )=(2. 0-0.2+0.3)×10-6 , which is sufficiently large to make the decay mode accessible to LHCb. Our study can be extended to other purely baryonic decays such as Λb0→p p ¯ Λ , Λb0→Λ p ¯ Λ , and Λb0→Λ Λ ¯Λ , as well as to similar decays of antitriplet b baryons such as Ξb0 ,-.

  3. A Pure Theory of Lifelong Learning.

    ERIC Educational Resources Information Center

    Hatton, Michael J.

    Charles Tiebout's Pure Theory of Local Expenditures serves as a helpful framework in examining the emergence of the learning society, communications technologies, freer trade, and the effects these will have on the educational infrastructure. Tiebout argued that the failure of market-type systems of public good at the central government level does…

  4. Disorders Involving Calcium, Phosphorus, and Magnesium

    PubMed Central

    Moe, Sharon M.

    2008-01-01

    Abnormalities of calcium, phosphorus and magnesium homeostasis are common, and collectively are called disorders of mineral metabolism. Normal homeostatic regulation maintains serum levels, intracellular levels, and optimal mineral content in bone. This regulation occurs at three major target organs, the intestine, kidney and bone, principally via the complex integration of two hormones, parathyroid hormone and vitamin D. An understanding of normal physiology is necessary to accurately diagnose and treat disorders of mineral metabolism and will be briefly reviewed before discussing the differential diagnosis and treatment of specific disorders. PMID:18486714

  5. Nanostructured Magnesium Hydride for Reversible Hydrogen Storage

    NASA Astrophysics Data System (ADS)

    de Rango, P.; Chaise, A.; Fruchart, D.; Miraglia, S.; Marty, Ph.

    2013-05-01

    The aim of this work was to develop suitable materials to store hydrogen in a solid state. A systematic investigation of the co-milling process of magnesium hydride with a transition metal was undertaken in order to produce nanostructured and highly reactive powders. The initiating role of the transition metal was evidenced by in situ neutron diffraction experiments. High performances in terms of thermal and mechanical behavior were achieved introducing expanded graphite and compacting the mixture to form composite materials. Absorption and desorption kinetics have been measured versus temperature and H2 pressure.

  6. 76 FR 76945 - Pure Magnesium From the People's Republic of China: Final Results of the 2009-2010 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... Duty Administrative Review, 76 FR 33194 (June 8, 2011) (``Preliminary Results''). DATES: Effective Date...- Market Economies: Valuing the Factor of Production: Labor, 76 FR 36092 (June 21, 2011) (``Labor... China; Extension of Time for the Final Results of the Antidumping Duty Administrative Review, 76...

  7. 76 FR 62091 - Pure Magnesium From China; Scheduling of an Expedited Five-Year Review Concerning the Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-06

    ... institution (76 FR 31635, June 1, 2011) of the subject five-year review was adequate and that the respondent... Commission's rules, as amended, 67 FR 68036 (November 8, 2002). Even where electronic filing of a document is... Handbook on Electronic Filing Procedures, 67 FR 68168, 68173 (November 8, 2002). \\3\\ The Commission...

  8. 78 FR 34646 - Pure Magnesium from the People's Republic of China: Preliminary Results of 2011-2012 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-10

    ... Economy Antidumping Proceedings: Assessment of Antidumping Duties, 76 FR 65694, 65694-95 (October 24, 2011... and New Shipper Reviews, and Final Rescission of New Shipper Review, 65 FR 20948 (April 19, 2000), and... Fourth Antidumping Duty Administrative Review, 69 FR 54635 (September 9, 2004), and accompanying IDM...

  9. 75 FR 80791 - Pure Magnesium From the People's Republic of China: Final Results of the 2008-2009 Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-23

    ... Republic of China: Preliminary Results of the 2008-2009 Antidumping Duty Administrative Review, 75 FR 34689 (June 18, 2010) (``Preliminary Results''). \\2\\ See Preliminary Results, at 75 FR at 34692. DATES... Time for the Final Results of the Antidumping Duty Administrative Review, 75 FR 63440 (October 15,...

  10. 77 FR 63787 - Pure Magnesium in Granular Form from the People's Republic of China: Continuation of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-17

    ... (``the Act'').\\1\\ \\1\\ See Initiation of Five-Year (``Sunset'') Review, 77 FR 4995 (February 1, 2012... Antidumping Duty Order, 77 FR 33165 (June 5, 2012). On October 1, 2012, the ITC published its determination.... No. 731-TA- 895 (Second Review)), 77 FR 59979 (October 1, 2012). Scope of the Order There is...

  11. 76 FR 47147 - Pure Magnesium in Granular Form From the People's Republic of China: Rescission of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ..., alumina (Al2O3), calcium aluminate, soda ash, hydrocarbons, graphite, coke, silicon, rare earth metals... Revocation in Part, 75 FR 81565 (December 28, 2010) (``Initiation''). \\2\\ See Memorandum to the File... Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 75...

  12. Acoustic velocities of pure and iron-bearing magnesium silicate perovskite measured to 25 GPa and 1200 K

    NASA Astrophysics Data System (ADS)

    Chantel, Julien; Frost, Daniel J.; McCammon, Catherine A.; Jing, Zhicheng; Wang, Yanbin

    2012-10-01

    Ultrasonic interferometry measurements in conjunction with in situ X-ray techniques have been used to measure compressional and shear wave velocities and densities of MgSiO3 perovskite (Mg-Pv) and Mg0.95Fe0.042+Fe0.013+SiO3 perovskite ((Mg, Fe)-Pv) in the multianvil at pressures up to 25 GPa and temperatures to 1200 K. Data for Mg-Pv are consistent with previous studies and the (Mg, Fe)-Pv sample has almost identical shear properties to Mg-Pv. The adiabatic bulk modulus, Ks, for (Mg, Fe)-Pv, however, is found to be substantially lower than Mg-Pv, with a refined value of 236 GPa and a pressure derivative of 4.7. It is proposed that this low KS value result from a change in the elasticity of Fe-bearing perovskite at low pressures <30 GPa. High temperature data are consistent with recent models and it is shown that the obtained elastic properties of (Mg, Fe)-Pv are not inconsistent with a lower mantle of bulk silicate Earth composition.

  13. 75 FR 34689 - Pure Magnesium From the People's Republic of China: Preliminary Results of the 2008-2009...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-18

    ... Russian Federation, 60 FR 25691 (May 12, 1995). \\2\\ See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 74 FR 20278 (May 1, 2009... Revocation in Part. 74 FR 30052 (June 24, 2009). On August 3, 2009, Trade Bridge, counsel for TXR and...

  14. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  15. 75 FR 9252 - Magnesium From China and Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-01

    ... magnesium (also known as magnesium metal) from China and Russia (70 FR 19928-19931). The Commission is... 207), as most recently amended at 74 FR 2847 (January 16, 2009). \\1\\ No response to this request for... employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 73 FR 24609...

  16. 75 FR 35086 - Magnesium From China and Russia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... group responses to its notice of institution (75 FR 9252, March 1, 2010) were adequate.\\1\\ A record of... COMMISSION Magnesium From China and Russia AGENCY: United States International Trade Commission. ACTION... orders on magnesium from China and Russia. SUMMARY: The Commission hereby gives notice that it...

  17. Fogging technique used to coat magnesium with plastic

    NASA Technical Reports Server (NTRS)

    Mroz, T. S.

    1967-01-01

    Cleaning process and a fogging technique facilitate the application of a plastic coating to magnesium plates. The cleaning process removes general organic and inorganic surface impurities, oils and greases, and oxides and carbonates from the magnesium surfaces. The fogging technique produces a thin-filmlike coating in a clean room atmosphere.

  18. Casting Porosity-Free Grain Refined Magnesium Alloys

    SciTech Connect

    Schwam, David

    2013-08-12

    The objective of this project was to identify the root causes for micro-porosity in magnesium alloy castings and recommend remedies that can be implemented in production. The findings confirm the key role played by utilizing optimal gating and risering practices in minimizing porosity in magnesium castings. 

  19. The twin-roll strip casting of magnesium

    NASA Astrophysics Data System (ADS)

    Liang, D.; Cowley, C. B.

    2004-05-01

    Commonwealth Scientific & Industrial Research Organization has been working since 2000 to develop twin-roll strip casting of magnesium alloy. The primary objective was to significantly reduce the manufacturing cost of the magnesium sheet through the twin-roll casting process. This article describes the goals and challenges of this project as well as pilot plant test results.

  20. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  1. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  2. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  3. 40 CFR 721.10021 - Magnesium potassium titanium oxide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... § 721.63 respirator requirements may request to do so under 40 CFR 721.30. Persons whose § 721.30... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Magnesium potassium titanium oxide... Specific Chemical Substances § 721.10021 Magnesium potassium titanium oxide. (a) Chemical substance...

  4. Association of Cord Blood Magnesium Concentration and Neonatal Resuscitation

    PubMed Central

    Johnson, Lynn H.; Mapp, Delicia C.; Rouse, Dwight J.; Spong, Catherine Y.; Mercer, Brian M.; Leveno, Kenneth J.; Varner, Michael W.; Iams, Jay D.; Sorokin, Yoram; Ramin, Susan M.; Miodovnik, Menachem; O'Sullivan, Mary J.; Peaceman, Alan M.; Caritis, Steve N.

    2014-01-01

    Objective Assess the relationship between umbilical cord blood magnesium concentration and level of delivery room resuscitation received by neonates. Study design Secondary analysis of a controlled fetal neuroprotection trial that enrolled women at imminent risk for delivery between 24 and 31 weeks’ gestation and randomly allocated them to receive intravenous magnesium sulfate or placebo. The cohort included 1507 infants for whom total cord blood magnesium concentration and delivery room resuscitation information were available. Multivariable logistic regression was used to estimate the association between cord blood magnesium concentration and highest level of delivery room resuscitation, using the following hierarchy: none, oxygen only, bag-mask ventilation with oxygen, intubation or chest compressions. Results There was no relationship between cord blood magnesium and delivery room resuscitation (odds ratio [OR] 0.92 for each 1.0 mEq/L increase in magnesium; 95% confidence interval [CI]: 0.83-1.03). Maternal general anesthesia was associated with increased neonatal resuscitation (OR 2.51; 95% CI: 1.72-3.68). Each 1-week increase in gestational age at birth was associated with decreased neonatal resuscitation (OR 0.63; 95% CI: 0.60 – 0.66). Conclusion Cord blood magnesium concentration does not correlate with the level of delivery room resuscitation of infants exposed to magnesium sulfate for fetal neuroprotection. PMID:22056282

  5. Biodegradable resistive switching memory based on magnesium difluoride.

    PubMed

    Zhang, Zhiping; Tsang, Melissa; Chen, I-Wei

    2016-08-11

    This study presents a new type of resistive switching memory device that can be used in biodegradable electronic applications. The biodegradable device features magnesium difluoride as the active layer and iron and magnesium as the corresponding electrodes. This is the first report on magnesium difluoride as a resistive switching layer. With on-off ratios larger than one hundred, the device on silicon switches at voltages less than one volt and requires only sub-mA programming current. AC endurance of 10(3) cycles is demonstrated with ±1 V voltage pulses. The switching mechanism is attributed to the formation and rupture of conductive filaments comprising fluoride vacancies in magnesium difluoride. Devices fabricated on a flexible polyethylene terephthalate substrate are tested for functionality, and degradation is subsequently demonstrated in de-ionized water. An additional layer of magnesium difluoride is used to hinder the degradation and extend the lifetime of the device. PMID:27476796

  6. Neurotic, neuromuscular and autonomic nervous form of magnesium imbalance.

    PubMed

    Durlach, J; Bac, P; Durlach, V; Bara, M; Guiet-Bara, A

    1997-06-01

    The nervous form of magnesium imbalance represents the best documented experimental and clinical aspects of magnesium disorders. The nervous form of primary magnesium deficit (MD) in the adult appears as the best descriptive model for analysis of the symptomatology, aetiology, physiopathology, diagnosis and therapy of the most frequent form of MD. Nervous hyperexcitability due to chronic MD in the adult results in a non-specific clinical pattern with associated central and peripheral neuromuscular symptoms, analogous to the symptomatology previously described in medical literature as latent tetany, hyperventilation syndrome, spasmophilia, chronic fatigue syndrome, neurocirculatory asthenia and idiopathic Barlow's disease. On encountering this non-specific pattern, the signs of neuromuscular hyperexcitability are of much greater importance. Trousseau's sign is less sensitive than Chvostek's sign, but their sensitivities are increased by hyperventilation (Von Bondsdorff's test). Examination of the precordial area will be conducted in order to search clinical stigmata of mitral valve prolapse (MVP) which is a frequent dyskinesia due to chronic MD (about a quarter to one-third of cases). The electromyogram (EMG) shows one (or several) trains of autorhythmic activities beating for more than 2 min of one of the three tetanic activities (uniplets, multiplets or 'complex tonicoclonic tracings') during one of the three facilitation procedures: tourniquet-induced ischaemia lasting 10 min. post-ischaemia lasting 10 min after the removal of the tourniquet and hyperventilation over 5 min. A repetitive EMG constitutes the principal mark of nervous hyperexcitability (NHE) due to MD. The echocardiogram (ECC) is the best tool for detecting MVP, the 2-dimensional ECC with pulsed Doppler being more accurate than time-motion ECC. The routine ionic investigations comprise five static tests: plasma and erythrocyte magnesium, plasma calcium and daily magnesiuria and calciuria. An

  7. 1-Nitronapthalene as a cathode material for magnesium reserve batteries

    NASA Astrophysics Data System (ADS)

    Thirunakaran, R.; Vasudevan, S.; Sivashanmugam, A.; Kumar, Gopu; Muniyandi, N.

    1-Nitronaphthalene has been investigated for use as a battery depolarizer in conjunction with a high-energt magnesium anode. Acetylene black is added to improve the conductivity of the non-conducting organic compound and its concentration in the mix is optimized for better performance of the cathode. To assess its suitability and its characteristics as a cathode active material, magnesium/1-nitronaphthalene cells are fabricated and discharged in different electrolytes (magnesium chloride, magnesium bromide and magnesium perchlorate) at various current densities. The capacity delivered by the cell system shows better reduction efficiency of the 1-nitronaphthalene depolarizer. Cyclic voltammetric studies are carried out on a glassy-carbon electrode to understand the reduction behaviour of 1-nitronaphthalene.

  8. Thermal Stability of Magnesium Silicide/Nickel Contacts

    NASA Astrophysics Data System (ADS)

    de Boor, J.; Droste, D.; Schneider, C.; Janek, J.; Mueller, E.

    2016-06-01

    Magnesium silicide-based materials are a very promising class of thermoelectric materials with excellent potential for thermoelectric waste heat recovery. For the successful application of magnesium silicide-based thermoelectric generators, the development of long-term stable contacts with low contact resistance is as important as material optimization. We have therefore studied the suitability of Ni as a contact material for magnesium silicide. Co-sintering of magnesium silicide and Ni leads to the formation of a stable reaction layer with low electrical resistance. In this paper we show that the contacts retain their low electrical contact resistance after annealing at temperatures up to 823 K for up to 168 h. By employing scanning electron microscope analysis and time-of-flight (ToF)-secondary ion mass spectrometry, we can further show that elemental diffusion is occurring to a very limited extent. This indicates long-term stability under practical operation conditions for magnesium silicide/nickel contacts.

  9. Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites.

    PubMed

    Liu, Xiaoling; Hasan, Muhammad S; Grant, David M; Harper, Lee T; Parsons, Andrew J; Palmer, Graham; Rudd, Chris D; Ahmed, Ifty

    2014-11-01

    Retention of mechanical properties of phosphate glass fibre reinforced degradable polyesters such as polycaprolactone and polylactic acid in aqueous media has been shown to be strongly influenced by the integrity of the fibre/polymer interface. A previous study utilising 'single fibre' fragmentation tests found that coating with magnesium improved the fibre and matrix interfacial shear strength. Therefore, the aim of this study was to investigate the effects of a magnesium coating on the manufacture and characterisation of a random chopped fibre reinforced polycaprolactone composite. Short chopped strand non-woven phosphate glass fibre mats were sputter coated with degradable magnesium to manufacture phosphate glass fibre/polycaprolactone composites. The degradation behaviour (water uptake, mass loss and pH change of the media) of these polycaprolactone composites as well as of pure polycaprolactone was investigated in phosphate buffered saline. The Mg coated fibre reinforced composites revealed less water uptake and mass loss during degradation compared to the non-coated composites. The cations released were also explored and a lower ion release profile for all three cations investigated (namely Na(+), Mg(2+) and Ca(2+)) was seen for the Mg coated composite samples. An increase of 17% in tensile strength and 47% in tensile modulus was obtained for the Mg coated composite samples. Both flexural and tensile properties were investigated and a higher retention of mechanical properties was obtained for the Mg coated fibre reinforced composite samples up to 10 days immersion in PBS. Cytocompatibility study showed both composite samples (coated and non-coated) had good cytocompatibility with human osteosarcoma cell line. PMID:25028389

  10. Serum magnesium concentration in drug-addicted patients.

    PubMed

    Karakiewicz, Beata; Kozielec, Tadeusz; Brodowski, Jacek; Chlubek, Dariusz; Noceń, Iwona; Starczewski, Andrzej; Brodowska, Agnieszka; Laszczyńska, Maria

    2007-03-01

    Drug addiction is a complex problem which leads to many somatic, psychic and social diseases. It is accompanied by the disturbed metabolism of various macro and micronutrients. The aim of this study was to assess serum magnesium concentration in drug-addicted patients and analyze whether Human Immunodeficiency Virus (HIV) infection and methadone treatment affect the level of serum magnesium in these patients. The examination was conducted in a group of 83 people - patients of Szczecin-Zdroje Psychiatric Hospital (Poland). They were 21 to 49 years old, and the mean age was 32 +/- 7 years. The control group consisted of 81 healthy individuals. Flame atomic-absorption spectrometry method was used to determine the magnesium concentration. The total serum magnesium concentration was calculated for the whole patient group, subgroups of women and men, a subgroup of people infected with HIV, and a subgroup receiving methadone substitution treatment. How magnesium behaves depending on age and addiction period, was checked. The mean concentration of magnesium in blood serum of the patients examined was 0.57 mmol/L, which was significantly lower than in the control group. In the subgroup of men it was 0.57 mmol/L, and in the subgroup of women - 0.55 mmol/L; the differences were not statistically significant. In the patient group nobody had the appropriate magnesium concentration in blood serum. No significant correlation was found between the magnesium concentration, age of the patients and addiction period. In the subgroup of seropositive people the mean concentration of magnesium was 0.55 mmol/L, and in the subgroup of non-infected patients - 0.58 mmol/L; the difference was not statistically significant. The mean concentration of magnesium in the subgroup treated with methadone was 0.59 mmol/L, and in the subgroup not involved in this type of therapy - 0.55 mmol/L; it was not a statistically significant difference. PMID:17536489

  11. Studies on Mechanisms of Hypocalcemia of Magnesium Depletion

    PubMed Central

    Reddy, Chilumula R.; Coburn, Jack W.; Hartenbower, David L.; Friedler, Robert M.; Brickman, Arnold S.; Massry, Shaul G.; Jowsey, Jenifer

    1973-01-01

    Studies were carried out to evaluate the mechanism of hypocalcemia in magnesium depletion. Day old chicks fed a magnesium deficient diet developed marked hypocalcemia, with a direct relation between serum calcium (y) and magnesium (x): y = 2.68 x + 4.24, r = 0.84 (both in mg/100 ml). Injections of parathyroid extract that increased serum calcium 2-3 mg/100 ml in normals had no effect in Mg-depleted birds. Very large dietary supplements of calcium or vitamin D3 increased mean serum calcium only from 5.3 to 7.7 and 7.8 mg/100 ml, respectively, while a normal magnesium diet for 3 days increased calcium from 5.3 to 9.9 mg/100 ml despite absence of dietary calcium. Intestinal calcium transport, studied in vitro, and the calcium concentration of the carcass was significantly increased in magnesium-depleted chicks, making it unlikely that reduced intestinal absorption of calcium caused the hypocalcemia. In magnesium-deficient chicks, the bone content of magnesium was decreased by 74%, the calcium content was unchanged, and the cortical thickness of bone was markedly increased. After 3 days of magnesium-repletion, cortical thickness was reduced with increased endosteal resorption. There was an increase in unmineralized osteoid tissue in the magnesium-depleted chicks. Parathyroid gland size and histology did not differ in magnesium-depleted and control birds. The results suggest that hypocalcemia develops due to altered equilibrium of calcium between extracellular fluid and bone, favoring increased net movement into the latter. Failure of parathyroid gland function could also exist, and unresponsiveness to parathyroid hormone (PTH) may also contribute to the hypocalcemia. However, failure of PTH action is probably due to the presence of excess osteoid tissue rather than a primary event leading to hypocalcemia. Images PMID:4750437

  12. Synthesis of nanoscale magnesium diboride powder

    NASA Astrophysics Data System (ADS)

    Finnemore, D. K.; Marzik, J. V.

    2015-12-01

    A procedure has been developed for the preparation of small grained magnesium diboride (MgB2) powder by reacting nanometer size boron powder in a magnesium vapor. Plasma synthesized boron powder that had particle sizes ranging from 20 to 300nm was mixed with millimeter size chunks of Mg by rolling stoichiometric amounts of the powders in a sealed cylindrical container under nitrogen gas. This mixture then was placed in a niobium reaction vessel, evacuated, and sealed by e-beam welding. The vessel was typically heated to approximately 830°C for several hours. The resulting MgB2 particles have a grain size in the 200 nm to 800 nm range. Agglomerates of loosely bound particles could be broken up by light grinding in a mortar and pestle. At 830°C, many particles are composed of several grains grown together so that the average particle size is about twice the average grain size. Experiments were conducted primarily with undoped boron powder, but carbon-doped boron powder showed very similar results.

  13. Prototype systems for rechargeable magnesium batteries.

    PubMed

    Aurbach, D; Lu, Z; Schechter, A; Gofer, Y; Gizbar, H; Turgeman, R; Cohen, Y; Moshkovich, M; Levi, E

    2000-10-12

    The thermodynamic properties of magnesium make it a natural choice for use as an anode material in rechargeable batteries, because it may provide a considerably higher energy density than the commonly used lead-acid and nickel-cadmium systems. Moreover, in contrast to lead and cadmium, magnesium is inexpensive, environmentally friendly and safe to handle. But the development of Mg batteries has been hindered by two problems. First, owing to the chemical activity of Mg, only solutions that neither donate nor accept protons are suitable as electrolytes; but most of these solutions allow the growth of passivating surface films, which inhibit any electrochemical reaction. Second, the choice of cathode materials has been limited by the difficulty of intercalating Mg ions in many hosts. Following previous studies of the electrochemistry of Mg electrodes in various non-aqueous solutions, and of a variety of intercalation electrodes, we have now developed rechargeable Mg battery systems that show promise for applications. The systems comprise electrolyte solutions based on Mg organohaloaluminate salts, and Mg(x)Mo3S4 cathodes, into which Mg ions can be intercalated reversibly, and with relatively fast kinetics. We expect that further improvements in the energy density will make these batteries a viable alternative to existing systems. PMID:11048714

  14. Synthesis of nanoscale magnesium diboride powder

    DOE PAGESBeta

    Finnemore, D. K.; Marzik, J. V.

    2015-12-18

    A procedure has been developed for the preparation of small grained magnesium diboride (MgB2) powder by reacting nanometer size boron powder in a magnesium vapor. Plasma synthesized boron powder that had particle sizes ranging from 20 to 300nm was mixed with millimeter size chunks of Mg by rolling stoichiometric amounts of the powders in a sealed cylindrical container under nitrogen gas. This mixture then was placed in a niobium reaction vessel, evacuated, and sealed by e-beam welding. The vessel was typically heated to approximately 830°C for several hours. The resulting MgB2 particles have a grain size in the 200 nmmore » to 800 nm range. Agglomerates of loosely bound particles could be broken up by light grinding in a mortar and pestle. At 830°C, many particles are composed of several grains grown together so that the average particle size is about twice the average grain size. Furthermore, experiments were conducted primarily with undoped boron powder, but carbon-doped boron powder showed very similar results.« less

  15. Deuterium storage in nanocrystalline magnesium thin films

    NASA Astrophysics Data System (ADS)

    Checchetto, R.; Bazzanella, N.; Miotello, A.; Brusa, R. S.; Zecca, A.; Mengucci, A.

    2004-02-01

    Nanocrystalline magnesium deuteride thin films with the β-MgD2 structure were prepared by vacuum evaporation of hexagonal magnesium (h-Mg) samples and thermal annealing in 0.15 MPa D2 atmosphere at 373 K. Thermal desorption spectroscopy analysis indicated that the rate-limiting step in the deuterium desorption was given by the thermal decomposition of the deuteride phase. The activation energy Δg of the β-MgD2→h-Mg+D2 reaction scaled from 1.13±0.03 eV in 650-nm-thick films to 1.01±0.02 eV in 75-nm-thick films most likely as consequence of different stress and defect level. Positron annihilation spectroscopy analysis of the thin-film samples submitted to deuterium absorption and desorption cycles reveal the presence of a high concentration of void-like defects in the h-Mg layers after the very first decomposition of the β-MgD2 phase, the presence of these open volume defects reduces the D2 absorption capacity of the h-Mg thin film.

  16. Synthesis of nanoscale magnesium diboride powder

    SciTech Connect

    Finnemore, D. K.; Marzik, J. V.

    2015-12-18

    A procedure has been developed for the preparation of small grained magnesium diboride (MgB2) powder by reacting nanometer size boron powder in a magnesium vapor. Plasma synthesized boron powder that had particle sizes ranging from 20 to 300nm was mixed with millimeter size chunks of Mg by rolling stoichiometric amounts of the powders in a sealed cylindrical container under nitrogen gas. This mixture then was placed in a niobium reaction vessel, evacuated, and sealed by e-beam welding. The vessel was typically heated to approximately 830°C for several hours. The resulting MgB2 particles have a grain size in the 200 nm to 800 nm range. Agglomerates of loosely bound particles could be broken up by light grinding in a mortar and pestle. At 830°C, many particles are composed of several grains grown together so that the average particle size is about twice the average grain size. Furthermore, experiments were conducted primarily with undoped boron powder, but carbon-doped boron powder showed very similar results.

  17. Fabrication of multilayer pancakelike basic magnesium carbonate.

    PubMed

    Sun, Jinhe; Jia, Yongzhong; Yan Jing; Yao, Ying; Ma, Jun

    2014-10-01

    The properties of nanomaterials was strongly affected by their microstructures. Here Mg5(CO3)4(OH)2 x 4H2O multilayer pancakelike structures were fabricated successfully by reaction of MgCl2 and Na2CO3 in aqueous solution at 363 K. The growth process of nanostructures was observed by XRD and SEM. Several transition states of multilayer pancakelike basic magnesium carbonates were observed, which help to understand better the formation process of this hierarchical nanostructures. The formation mechanism of Mg5(CO3)4(OH)2 x 4H2O multilayer pancakelike structures was discussed and helical growth was proposed. The amorphous nanoparticles were formed firstly. Then nanopartilces aggregated and oriented assembly under the direction of chemical bonds with the help of water molecules. The multilayer pancakelike basic magnesium carbonates was formed by helical growth of wafers along (100) and (001) direction. The diameter and volume decreased with the increasing concentration of reactants. PMID:25942931

  18. Blackening of magnesium alloy using femtosecond laser.

    PubMed

    Shi, Haixia; Cui, Zeqin; Wang, Wenxian; Xu, Bingshe; Gong, Dianqing; Zhang, Wei

    2015-09-01

    Magnesium alloy, a potential structural and biodegradable material, has been increasingly attracting attention. In this paper, two structures with enhanced light absorption on an AZ31B magnesium surface are fabricated by femtosecond laser texturing. Laser power and the number of laser pulses are mainly investigated for darkening effect. After irradiation, surface characteristics are analyzed by a scanning electron microscope equipped with an energy dispersive spectrometer and laser scanning confocal microscope. The darkening effect is investigated by a spectrophotometer with an integrating sphere. Microgroove and stripe structures are obtained, which are covered with homogeneous nanoprotrusions and nanoparticles. The main surface chemical composition after laser ablation is MgO. The optimal light absorption in the visible range (wavelength of 400-800 nm) reaches about 98%, which is significantly improved compared with the untreated surface. The enhanced light absorption is mainly attributed to surface structure. Femtosecond laser surface texturing technology offers potential in the application of stealth technology, airborne devices, and biomedicine. PMID:26368903

  19. Thermochemistry of dense hydrous magnesium silicates

    NASA Technical Reports Server (NTRS)

    Bose, Kunal; Burnley, Pamela; Navrotsky, Alexandra

    1994-01-01

    Recent experimental investigations under mantle conditions have identified a suite of dense hydrous magnesium silicate (DHMS) phases that could be conduits to transport water to at least the 660 km discontinuity via mature, relatively cold, subducting slabs. Water released from successive dehydration of these phases during subduction could be responsible for deep focus earthquakes, mantle metasomatism and a host of other physico-chemical processes central to our understanding of the earth's deep interior. In order to construct a thermodynamic data base that can delineate and predict the stability ranges for DHMS phases, reliable thermochemical and thermophysical data are required. One of the major obstacles in calorimetric studies of phases synthesized under high pressure conditions has been limitation due to the small (less than 5 mg) sample mass. Our refinement of calorimeter techniques now allow precise determination of enthalpies of solution of less than 5 mg samples of hydrous magnesium silicates. For example, high temperature solution calorimetry of natural talc (Mg(0.99) Fe(0.01)Si4O10(OH)2), periclase (MgO) and quartz (SiO2) yield enthalpies of drop solution at 1044 K to be 592.2 (2.2), 52.01 (0.12) and 45.76 (0.4) kJ/mol respectively. The corresponding enthalpy of formation from oxides at 298 K for talc is minus 5908.2 kJ/mol agreeing within 0.1 percent to literature values.

  20. A Magnesium-Activated Carbon Hybrid Capacitor

    SciTech Connect

    Yoo, HD; Shterenberg, I; Gofer, Y; Doe, RE; Fischer, CC; Ceder, G; Aurbach, D

    2013-12-11

    Prototype cells of hybrid capacitor were developed, comprising activated carbon (AC) cloth and magnesium (Mg) foil as the positive and negative electrodes, respectively. The electrolyte solution included ether solvent (TBF) and a magnesium organo-halo-aluminate complex 0.25 M Mg2Cl3+-Ph2AlCl2-. In this solution Mg can be deposited/dissolved reversibly for thousands of cycles with high reversibility (100% cycling efficiency). The main barrier for integrating porous AC electrodes with this electrolyte solution was the saturation of the pores with the large ions in the AC prior to reaching the potential limit. This is due to the existence of bulky Mg and Al based ionic complexes consisting Cl, alkyl or aryl (R), and THF ligands. This problem was resolved by adding 0.5 M of lithium chloride (LiCl), thus introducing smaller ionic species to the solution. This Mg hybrid capacitor system demonstrated a stable cycle performance for many thousands of cycles with a specific capacitance of 90 Fg(-1) for the AC positive electrodes along a potential range of 2.4 V. (C) 2014 The Electrochemical Society. All rights reserved.

  1. Structural and magnetic studies of the Zn-substituted magnesium ferrite chromate

    NASA Astrophysics Data System (ADS)

    Gismelseed, A. M.; Mohammed, K. A.; Al-Rawas, A. D.; Yousif, A. A.; Widatallah, H. M.; Elzain, M. E.

    2014-04-01

    The mixed zinc-magnesium ferrite chromate with composition Mg1-xZnxFeCrO4 (0.0 ≤ x ≤ 1.0) prepared by the conventional solid state double sintering ceramic technique were characterized using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Mössbauer Spectroscopy (MS). The analysis of the X-ray pattern reveal that the samples crystalize in a single-phase cubic spinel structure and the lattice parameter increases linearly with increasing the Zn content. The SEM micrographs showed aggregates of stacked grains of about (0.2 ˜ 1.5 μm) in diameter. The 78 K Mössbauer spectrum of pure magnesium chromate shows an ordered magnetic structure with well resolved tetrahedral and octahedral sites. As Zn substitutes for Mg, the 78 K spectra started to show the presence of a paramagnetic component superimposed on broadened magnetic sextets. This behavior is attributed to the presence of superparamagnetic domains in the samples which will be discussed based on the weakening of A-B exchange interaction in ferrite lattice due to replacement of Fe3+ ions in tetrahedral sites by Zn2+ ions.

  2. Dynamical behaviors of structural, constrained and free water in calcium- and magnesium-silicate-hydrate gels

    DOE PAGESBeta

    Le, Peisi; Fratini, Emiliano; Ito, Kanae; Wang, Zhe; Mamontov, Eugene; Baglioni, Piero; Chen, Sow-Hsin

    2016-01-28

    We present the hypothesis that the mechanical properties of cement pastes depend strongly on their porosities. In a saturated paste, the porosity links to the free water volume after hydration. Structural water, constrained water, and free water have different dynamical behavior. Hence, it should be possible to extract information on pore system by exploiting the water dynamics. With our experiments we investigated the slow dynamics of hydration water confined in calcium- and magnesium-silicate-hydrate (C-S-H and M-S-H) gels using high-resolution quasi-elastic neutron scattering (QENS) technique. C-S-H and M-S-H are the chemical binders present in calcium rich and magnesium rich cements. Wemore » measured three M-S-H samples: pure M-S-H, M-S-H with aluminum-silicate nanotubes (ASN), and M-S-H with carboxyl group functionalized ASN (ASN-COOH). A C-S-H sample with the same water content (i.e. 0.3) is also studied for comparison. We found that structural water in the gels contributes to the elastic component of the QENS spectrum, while constrained water and free water contribute the quasi-elastic component. The quantitative analysis suggests that the three components vary for different samples and indicate the variance in the system porosity, which controls the mechanical properties of cement pastes.« less

  3. Dynamical behaviors of structural, constrained and free water in calcium- and magnesium-silicate-hydrate gels

    SciTech Connect

    Le, Peisi; Fratini, Emiliano; Wang, Zhe; Mamontov, Eugene; Baglioni, P; Chen, Sow-Hsin

    2016-01-01

    Hypothesis: The mechanical properties of cement pastes depend strongly on their porosities. In a saturated paste, the porosity links to the free water volume after hydration. Structural water, constrained water, and free water have different dynamical behavior. Hence, it should be possible to extract information on pore system by exploiting the water dynamics. Experiments: We investigated the slow dynamics of hydration water confined in calcium- and magnesium-silicate-hydrate (C-S-H and M-S-H) gels using high-resolution quasi-elastic neutron scattering (QENS) technique. C-S-H and M-S-H are the chemical binders present in calcium rich and magnesium rich cements. We measured three M-S-H samples: pure M-S-H, M-S-H with aluminum-silicate nanotubes (ASN), and M-S-H with carboxyl group functionalized ASN (ASN-COOH). A C-S-H sample with the same water content (i.e. 0.3) is also studied for comparison. Findings: Structural water in the gels contributes to the elastic component of the QENS spectrum, while constrained water and free water contribute the quasi-elastic component. The quantitative analysis suggests that the three components vary for different samples and indicate the variance in the system porosity, which controls the mechanical properties of cement pastes. (C) 2016 Elsevier Inc. All rights reserved.

  4. Topography, wetting, and corrosion responses of electrodeposited hydroxyapatite and fluoridated hydroxyapatite on magnesium.

    PubMed

    Assadian, Mahtab; Jafari, Hassan; Ghaffari Shahri, Seyed Morteza; Idris, Mohd Hasbullah; Almasi, Davood

    2016-08-12

    In this study, different types of calcium-phosphate phases were coated on NaOH pre-treated pure magnesium. The coating was applied by electrodeposition method in order to provide higher corrosion resistance and improve biocompatibility for magnesium. Thickness, surface morphology and topography of the coatings were analyzed using optical, scanning electron and atomic-force microscopies, respectively. Composition and chemical bonding, crystalline structures and wettability of the coatings were characterized using energy-dispersive and attenuated total reflectance-Fourier transform infrared spectroscopies, grazing incidence X-ray diffraction and contact angle measurement, respectively. Degradation behavior of the coated specimens was also investigated by potentiodynamic polarization and immersion tests. The experiments proved the presence of a porous coating dominated by dicalcium-phosphate dehydrate on the specimens. It was also verified that the developed hydroxyapatite was crystallized by alkali post-treatment. Addition of supplemental fluoride to the coating electrolyte resulted in stable and highly crystallized structures of fluoridated hydroxyapatite. The coatings were found effective to improve biocompatibility combined with corrosion resistance of the specimens. Noticeably, the fluoride supplemented layer was efficient in lowering corrosion rate and increasing surface roughness of the specimens compared to hydroxyapatite and dicalcium-phosphate dehydrates layers. PMID:27567782

  5. Laser surface modification of Ti and TiC coatings on magnesium alloy

    NASA Astrophysics Data System (ADS)

    Kim, J. M.; Lee, S. G.; Park, J. S.; Kim, H. G.

    2014-12-01

    In order to enhance the surface properties of magnesium alloy, a highly intense laser surface melting process following plasma spraying of Ti or TiC on AZ31 alloy were employed. When laser surface melting was applied to Ti coated magnesium alloy, the formation of fine Ti particle dispersed surface layer on the substrate occurred. The corrosion potential of the AZ31 alloy with Ti dispersed surface was significantly increased in 3.5 wt % NaCl solution. Additionally, an improved hardness was observed for the laser treated specimens as compared to the untreated AZ31 alloy. Laser melting process following plasma thermal deposition was also applied for obtaining in situ TiC coating layer on AZ31 alloy. The TiC coating layer could be successfully formed via in situ reaction between pure titanium and carbon powders. Incomplete TiC formation was observed in the plasma sprayed specimen, while completely transformed TiC layer was found after post laser melting process. It was also confirmed that the laser post treatment induced enhanced adhesion strength between the coating and the substrate.

  6. Facile Synthesis of Porous Silicon Nanofibers by Magnesium Reduction for Application in Lithium Ion Batteries.

    PubMed

    Cho, Daehwan; Kim, Moonkyoung; Hwang, Jeonghyun; Park, Jay Hoon; Joo, Yong Lak; Jeong, Youngjin

    2015-12-01

    We report a facile fabrication of porous silicon nanofibers by a simple three-stage procedure. Polymer/silicon precursor composite nanofibers are first fabricated by electrospinning, a water-based spinning dope, which undergoes subsequent heat treatment and then reduction using magnesium to be converted into porous silicon nanofibers. The porous silicon nanofibers are coated with a graphene by using a plasma-enhanced chemical vapor deposition for use as an anode material of lithium ion batteries. The porous silicon nanofibers can be mass-produced by a simple and solvent-free method, which uses an environmental-friendly polymer solution. The graphene-coated silicon nanofibers show an improved cycling performance of a capacity retention than the pure silicon nanofibers due to the suppression of the volume change and the increase of electric conductivity by the graphene. PMID:26510445

  7. Facile Synthesis of Porous Silicon Nanofibers by Magnesium Reduction for Application in Lithium Ion Batteries

    NASA Astrophysics Data System (ADS)

    Cho, Daehwan; Kim, Moonkyoung; Hwang, Jeonghyun; Park, Jay Hoon; Joo, Yong Lak; Jeong, Youngjin

    2015-10-01

    We report a facile fabrication of porous silicon nanofibers by a simple three-stage procedure. Polymer/silicon precursor composite nanofibers are first fabricated by electrospinning, a water-based spinning dope, which undergoes subsequent heat treatment and then reduction using magnesium to be converted into porous silicon nanofibers. The porous silicon nanofibers are coated with a graphene by using a plasma-enhanced chemical vapor deposition for use as an anode material of lithium ion batteries. The porous silicon nanofibers can be mass-produced by a simple and solvent-free method, which uses an environmental-friendly polymer solution. The graphene-coated silicon nanofibers show an improved cycling performance of a capacity retention than the pure silicon nanofibers due to the suppression of the volume change and the increase of electric conductivity by the graphene.

  8. Color-neutral switchable mirrors based on magnesium-titanium thin films

    NASA Astrophysics Data System (ADS)

    Bao, S.; Tajima, K.; Yamada, Y.; Okada, M.; Yoshimura, K.

    2007-06-01

    In an investigation of smart-window applications of switchable mirror thin films, Pd-capped magnesium-titanium thin films were prepared by dc magnetron sputtering. Their optical properties, switching durability and crystalline structures have been investigated. We show that Pd/Mg-Ti thin films with specific thicknesses are completely color-neutral in the transparent state and their optical switching properties are suitable for building and automobile window glass applications. The ternary hydrides of Mg(1-x)Tix thin films with Pd overlayers are identified by in situ X-ray diffraction measurements during a hydrogen gas loading of 4%. Pd/Mg(1-x)Tix thin film switchable mirrors show fast hydriding and dehydriding kinetics as compared to a Pd-capped pure Mg thin film due to the catalytic role of doped metallic Ti.

  9. Pure field theories and MACSYMA algorithms

    NASA Technical Reports Server (NTRS)

    Ament, W. S.

    1977-01-01

    A pure field theory attempts to describe physical phenomena through singularity-free solutions of field equations resulting from an action principle. The physics goes into forming the action principle and interpreting specific results. Algorithms for the intervening mathematical steps are sketched. Vacuum general relativity is a pure field theory, serving as model and providing checks for generalizations. The fields of general relativity are the 10 components of a symmetric Riemannian metric tensor; those of the Einstein-Straus generalization are the 16 components of a nonsymmetric. Algebraic properties are exploited in top level MACSYMA commands toward performing some of the algorithms of that generalization. The light cone for the theory as left by Einstein and Straus is found and simplifications of that theory are discussed.

  10. Effective pure states for bulk quantum computation

    SciTech Connect

    Knill, E.; Chuang, I.; Laflamme, R.

    1997-11-01

    In bulk quantum computation one can manipulate a large number of indistinguishable quantum computers by parallel unitary operations and measure expectation values of certain observables with limited sensitivity. The initial state of each computer in the ensemble is known but not pure. Methods for obtaining effective pure input states by a series of manipulations have been described by Gershenfeld and Chuang (logical labeling) and Corey et al. (spatial averaging) for the case of quantum computation with nuclear magnetic resonance. We give a different technique called temporal averaging. This method is based on classical randomization, requires no ancilla qubits and can be implemented in nuclear magnetic resonance without using gradient fields. We introduce several temporal averaging algorithms suitable for both high temperature and low temperature bulk quantum computing and analyze the signal to noise behavior of each.

  11. Black Hole Attractors and Pure Spinors

    SciTech Connect

    Hsu, Jonathan P.; Maloney, Alexander; Tomasiello, Alessandro

    2006-02-21

    We construct black hole attractor solutions for a wide class of N = 2 compactifications. The analysis is carried out in ten dimensions and makes crucial use of pure spinor techniques. This formalism can accommodate non-Kaehler manifolds as well as compactifications with flux, in addition to the usual Calabi-Yau case. At the attractor point, the charges fix the moduli according to {Sigma}f{sub k} = Im(C{Phi}), where {Phi} is a pure spinor of odd (even) chirality in IIB (A). For IIB on a Calabi-Yau, {Phi} = {Omega} and the equation reduces to the usual one. Methods in generalized complex geometry can be used to study solutions to the attractor equation.

  12. Magnesium substituted hydroxyapatite coating on titanium with nanotublar TiO2 intermediate layer via electrochemical deposition

    NASA Astrophysics Data System (ADS)

    Yajing, Yan; Qiongqiong, Ding; Yong, Huang; Han, Shuguang; Pang, Xiaofeng

    2014-06-01

    Hydroxyapatite (HAp) coatings doped with magnesium ion is an attractive method to improve the biocompatibility and biodegradability of HAp coatings. In this paper, we used electrochemical deposition to study the production of magnesium-doped HAp (MgHAp) coatings onto pure titanium with anodized titanium oxide (TiO2) nanotubes as intermediate layer. The morphology and composition of coatings were studied by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. Results indicated that Mg was uniformly distributed in the coatings, and each coating was found to be 21 μm thick. With Mg2+ incorporation, Ca2+ was substituted by Mg2+ in the MgHAp coating, thereby reducing apatite crystallinity and weekly increasing bond strength. The bioactivity and corrosion resistance of the coatings were improved in simulated body fluid and polarization tests, respectively. Cell culture tests indicated that the magnesium-substituted coatings had good biocompatibility and no adverse effect.

  13. Computing Properties Of Pure And Mixed Fluids

    NASA Technical Reports Server (NTRS)

    Fowler, J. R.; Hendricks, Robert C.

    1993-01-01

    GASPLUS created as two-part code: first designed for use with pure fluids and second designed for use with mixtures of fluids and phases. Offers routines for mathematical modeling of conditions of fluids in pumps, turbines, compressors and other machines. Other routines for calculating performance of para/ortho-hydrogen reactor and heat of para/normal-hydrogen reaction as well as unique convergence routine demonstrates engineering flavor of GASPLUS. Written in FORTRAN 77.

  14. Effective pure states for bulk quantum computation

    SciTech Connect

    Knill, E.; Chuang, I.; Laflamme, R.

    1998-05-01

    In bulk quantum computation one can manipulate a large number of indistinguishable quantum computers by parallel unitary operations and measure expectation values of certain observables with limited sensitivity. The initial state of each computer in the ensemble is known but not pure. Methods for obtaining effective pure input states by a series of manipulations have been described by Gershenfeld and Chuang (logical labeling) [Science {bold 275}, 350 (1997)] and Cory {ital et al.} (spatial averaging) [Proc. Natl. Acad. Sci. USA {bold 94}, 1634 (1997)] for the case of quantum computation with nuclear magnetic resonance. We give a different technique called temporal averaging. This method is based on classical randomization, requires no ancilla quantum bits, and can be implemented in nuclear magnetic resonance without using gradient fields. We introduce several temporal averaging algorithms suitable for both high-temperature and low-temperature bulk quantum computing and analyze the signal-to-noise behavior of each. Most of these algorithms require only a constant multiple of the number of experiments needed by the other methods for creating effective pure states. {copyright} {ital 1998} {ital The American Physical Society}

  15. On constructing purely affine theories with matter

    NASA Astrophysics Data System (ADS)

    Cervantes-Cota, Jorge L.; Liebscher, D.-E.

    2016-08-01

    We explore ways to obtain the very existence of a space-time metric from an action principle that does not refer to it a priori. Although there are reasons to believe that only a non-local theory can viably achieve this goal, we investigate here local theories that start with Schrödinger's purely affine theory (Schrödinger in Space-time structure. Cambridge UP, Cambridge, 1950), where he gave reasons to set the metric proportional to the Ricci curvature aposteriori. When we leave the context of unified field theory, and we couple the non-gravitational matter using some weak equivalence principle, we can show that the propagation of shock waves does not define a lightcone when the purely affine theory is local and avoids the explicit use of the Ricci tensor in realizing the weak equivalence principle. When the Ricci tensor is substituted for the metric, the equations seem to have only a very limited set of solutions. This backs the conviction that viable purely affine theories have to be non-local.

  16. Graphical calculus for Gaussian pure states

    SciTech Connect

    Menicucci, Nicolas C.; Flammia, Steven T.; Loock, Peter van

    2011-04-15

    We provide a unified graphical calculus for all Gaussian pure states, including graph transformation rules for all local and semilocal Gaussian unitary operations, as well as local quadrature measurements. We then use this graphical calculus to analyze continuous-variable (CV) cluster states, the essential resource for one-way quantum computing with CV systems. Current graphical approaches to CV cluster states are only valid in the unphysical limit of infinite squeezing, and the associated graph transformation rules only apply when the initial and final states are of this form. Our formalism applies to all Gaussian pure states and subsumes these rules in a natural way. In addition, the term 'CV graph state' currently has several inequivalent definitions in use. Using this formalism we provide a single unifying definition that encompasses all of them. We provide many examples of how the formalism may be used in the context of CV cluster states: defining the 'closest' CV cluster state to a given Gaussian pure state and quantifying the error in the approximation due to finite squeezing; analyzing the optimality of certain methods of generating CV cluster states; drawing connections between this graphical formalism and bosonic Hamiltonians with Gaussian ground states, including those useful for CV one-way quantum computing; and deriving a graphical measure of bipartite entanglement for certain classes of CV cluster states. We mention other possible applications of this formalism and conclude with a brief note on fault tolerance in CV one-way quantum computing.

  17. Effect of magnesium on the burning characteristics of boron particles

    NASA Astrophysics Data System (ADS)

    Liu, Jian-zhong; Xi, Jian-fei; Yang, Wei-juan; Hu, You-rui; Zhang, Yan-wei; Wang, Yang; Zhou, Jun-hu

    2014-03-01

    Boron is an attractive fuel for propellants and explosives because of its high energy density. However, boron particles are difficult to combust because of inhibiting oxide layers that cover the particles. The use of magnesium as additives has been shown to promote boron oxidation. In this study, laser ignition facility and thermobalance were used to investigate the effect of magnesium on the burning characteristics of boron particles. The influences of magnesium addition on sample combustion flame, boron ignition delay time, boron combustion efficiency and initial temperature of boron oxidation. Results show that all Mg/B samples exhibit the same type of flame structure, i.e., a bright plume surrounded by green radiation which is interpreted as BO2 emission. The combustion flame intensity of a sample increases with the increasing magnesium content of boron particles. An increase in magnesium content results in a decrease and a subsequent increase in boron ignition delay time. (Mg/B)0.2 has a minimum ignition delay time of ~48 ms. Boron combustion efficiency increases with increasing magnesium addition. (Mg/B)0.5 shows a maximum boron combustion efficiency of ~64.2%. Magnesium addition decreases the initial temperature of boron oxidation.

  18. The history of biodegradable magnesium implants: a review.

    PubMed

    Witte, Frank

    2010-05-01

    Today, more than 200years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals. PMID:20172057

  19. Reprint of: The history of biodegradable magnesium implants: A review.

    PubMed

    Witte, Frank

    2015-09-01

    Today, more than 200 years after the first production of metallic magnesium by Sir Humphry Davy in 1808, biodegradable magnesium-based metal implants are currently breaking the paradigm in biomaterial science to develop only highly corrosion resistant metals. This groundbreaking approach to temporary metallic implants is one of the latest developments in biomaterials science that is being rediscovered. It is a challenging topic, and several secrets still remain that might revolutionize various biomedical implants currently in clinical use. Magnesium alloys were investigated as implant materials long ago. A very early clinical report was given in 1878 by the physician Edward C. Huse. He used magnesium wires as ligature for bleeding vessels. Magnesium alloys for clinical use were explored during the last two centuries mainly by surgeons with various clinical backgrounds, such as cardiovascular, musculoskeletal and general surgery. Nearly all patients benefited from the treatment with magnesium implants. Although most patients experienced subcutaneous gas cavities caused by rapid implant corrosion, most patients had no pain and almost no infections were observed during the postoperative follow-up. This review critically summarizes the in vitro and in vivo knowledge and experience that has been reported on the use of magnesium and its alloys to advance the field of biodegradable metals. PMID:26235343

  20. Magnesium treatment for neuroprotection in ischemic diseases of the brain

    PubMed Central

    2013-01-01

    This article reviews experimental and clinical data on the use of magnesium as a neuroprotective agent in various conditions of cerebral ischemia. Whereas magnesium has shown neuroprotective properties in animal models of global and focal cerebral ischemia, this effect could not be reproduced in a large human stroke trial. These conflicting results may be explained by the timing of treatment. While treatment can be started before or early after ischemia in experimental studies, there is an inevitable delay of treatment in human stroke. Magnesium administration to women at risk for preterm birth has been investigated in several randomized controlled trials and was found to reduce the risk of neurological deficits for the premature infant. Postnatal administration of magnesium to babies after perinatal asphyxia has been studied in a number of controlled clinical trials. The results are promising but the trials have, so far, been underpowered. In aneurysmal subarachnoid hemorrhage (SAH), cerebral ischemia arises with the onset of delayed cerebral vasospasm several days after aneurysm rupture. Similar to perinatal asphyxia in impending preterm delivery, treatment can be started prior to ischemia. The results of clinical trials are conflicting. Several clinical trials did not show an additive effect of magnesium with nimodipine, another calcium antagonist which is routinely administered to SAH patients in many centers. Other trials found a protective effect after magnesium therapy. Thus, it may still be a promising substance in the treatment of secondary cerebral ischemia after aneurysmal SAH. Future prospects of magnesium therapy are discussed. PMID:23618347