Science.gov

Sample records for a318 a319 a320

  1. 75 FR 27414 - Airworthiness Directives; Airbus A318, A319, A320, A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-17

    ... was published in the Federal Register on February 23, 2010 (75 FR 8003). That NPRM proposed to correct... Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant..., A320, A321 Series Airplanes AGENCY: Federal Aviation Administration (FAA), Department of...

  2. 75 FR 8003 - Airworthiness Directives; Airbus A318, A319, A320, A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will... configuration, adding a new circuit breaker and new relay to the AC/DC ESS BUS circuit, and adding a diode... relay to the AC/DC ESS BUS circuit, and adding a diode between a certain relay and terminal...

  3. 76 FR 16582 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-24

    ..., 2007, we issued AD 2007-20-05, Amendment 39-15215 (72 FR 56262, October 3, 2007). That AD required... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will...), 40113, 44701. Sec. 39.13 2. The FAA amends Sec. 39.13 by removing Amendment 39-15215 (72 FR...

  4. 76 FR 42024 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-18

    ... AD as of November 7, 2007 (72 FR 56262, October 3, 2007). ADDRESSES: You may examine the AD docket on... NPRM was published in the Federal Register on March 24, 2011 (76 FR 16582), and proposed to supersede AD 2007-20-05, Amendment 39-15215 (72 FR 56262, October 3, 2007). Since we issued AD 2007-20-05,...

  5. 75 FR 16689 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-02

    ... Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic... identified. Inspections include vacuum loss inspections for de-bonding of the rudders in reinforced areas and... where production reworks have been identified. Inspections include vacuum loss inspections for...

  6. 75 FR 52246 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-25

    ... corresponds to FAA AD 2007-20-05, Amendment 39- 15215 (72 FR 56262, October 3, 2007)]. This ALI task has been...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have... November 2006. Table of Contents 1-TOC 9 November 2006. Section 1--Introduction 1--7 9 November...

  7. 76 FR 57630 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-16

    ... NPRM was published in the Federal Register on November 8, 2010 (75 FR 68548), and proposed to supersede AD 2009-17-04, Amendment 39-15995 (74 FR 41611, August 18, 2009). That NPRM proposed to correct an... this one-time inspection campaign, a significant number of rod eye-ends have been found cracked....

  8. 75 FR 78883 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-17

    ... Sec. 39.13(c), in the second column, in the first column of the table, in the 30th entry, ``D554 71000... column, in the second column of the table, in the 19th entry, ``TS-Z072'', should read ``TS-2072''. 3. On page 68184, in the same section, in the first column, in the first column of the table, in the...

  9. 76 FR 56279 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-13

    ... reference of certain other publications listed in the AD as of August 13, 2004 (69 FR 45243, July 29, 2004... issued AD 2004-15-14, Amendment 39-13748 (69 FR 45243, July 29, 2004), which corresponded to Direction G... provided in French AD F-2004- 074. Since we issued AD 2004-15-14, Amendment 39-13748 (69 FR 45243, July...

  10. 75 FR 68181 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-05

    ... (75 FR 16689). That NPRM proposed to correct an unsafe condition for the specified products. The MCAI... Procedures (44 FR 11034, February 26, 1979); and ] 3. Will not have a significant economic impact, positive...-1570 D554 71001 000 00 TS-1573 D554 71001 000 00 TS-1575 D554 71001 000 00 TS-1578 D554 71001 000 00...

  11. 77 FR 64025 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Interaction of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-18

    ... in the assessment of the effects of these systems on structures. Applicability As discussed above... Privacy Act Statement can be found in the Federal Register published on April 11, 2000 (65 FR 19477-19478... performance, either directly or as a result of a failure or malfunction, the influence of these systems...

  12. 76 FR 64854 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-19

    ... mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country... two categories of scenarios that could lead to thrust asymmetry during landing with controllability and deceleration consequences * * * * * These thrust asymmetry conditions, if not corrected,...

  13. 77 FR 64023 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Design Roll...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-18

    ... April 11, 2000 (65 FR 19477-19478), as well as at http://DocketsInfo.dot.gov/ . Docket: Background... corresponding to maximum angular acceleration must be investigated for airplanes with engines or other weight concentrations outboard of the fuselage. For the angular acceleration conditions, zero rolling velocity may...

  14. 76 FR 37241 - Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-27

    ..., listed in the AD as of April 27, 2007 (72 FR 13681, March 23, 2007). We must receive comments on this AD... 39-14999 (72 FR 13681, March 23, 2007). That AD required actions intended to address an unsafe... bilateral agreement with the State of Design Authority, we have been notified of the unsafe...

  15. 75 FR 75878 - Airworthiness Directives; Airbus Model A318-111 and A318-112 Airplanes and Model A319, A320, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-07

    ... duplicated across other racks but during critical phases of flight the multiple system failures/re... of flight the multiple system failures/re-configuration may constitute an unsafe condition. For the... system failures/re-configuration may constitute an unsafe condition. * * * * * Compliance (f) You...

  16. 75 FR 46873 - Airworthiness Directives; Airbus Model A318-111 and A318-112 Airplanes and Model A319, A320, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-04

    ... racks but during critical phases of flight the multiple system failures/re-configuration may constitute... duplicated across other racks but during critical phases of flight the multiple system failures/re... system failures/re-configuration may constitute an unsafe condition. * * * * * Compliance (f) You...

  17. 75 FR 12965 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Seats With Non...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... Notice of Proposed Rule Making (NPRM), Notice No. 85-10 (50 FR 15038, April 16, 1985), and the Final Rule at Amendment 25-61 (51 FR 26206, July 21, 1986), specifically note that seats were excluded ``because... the seats.'' Subsequently, the Final Rule at Amendment 25-83 (60 FR 6615, March 6, 1995) clarified...

  18. 77 FR 64029 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Design Dive Speed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-18

    ... April 11, 2000 (65 FR 19477-19478), as well as at http: DocketsInfo.dot.gov/. Docket: Background... Series Airplanes; Design Dive Speed AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... airplanes. These design features include a high-speed protection system. The applicable...

  19. 76 FR 1346 - Airworthiness Directives; Airbus Model A300, A300-600, A310, A318, A319, A320, A321, A330-300...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ... 12866, (2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034... Series Airplanes; and Model A330-201, A330-202, A330- 203, A330-223, A330-243 Airplanes AGENCY: Federal...-600 series airplanes, and Model A330-201, A330-202, A330-203, A330-223, A330-243 airplanes,...

  20. 76 FR 27863 - Airworthiness Directives; Airbus Model A318-112, A319-111, A319-112, A319-115, A319-132, A319-133...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-13

    ... Flight Control System (EFCS) and consequent loss of control of the aeroplane. In addition, this condition... result in in-flight failure of the Electrical Flight Control System (EFCS) and consequent loss of control... corrected, could potentially result in in-flight failure of the Electrical Flight Control......

  1. 76 FR 67625 - Airworthiness Directives; Airbus Model A319 and A320 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-02

    ... corrected, could result in both LH and Right Hand (RH) off-wing exits being unserviceable which, during an... corrected, could result in both LH and Right Hand (RH) off-wing exits being unserviceable which, during an... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3....

  2. 75 FR 11439 - Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-11

    ... NPRM was published in the Federal Register on July 15, 2009 (74 FR 34274). That NPRM proposed to... be the same as a similar AD for the EIS2 (AD 2009-23-05, Amendment 39-16077, 74 FR 57578, November 9... Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact, positive...

  3. Classification and Prediction of RF Coupling inside A-320 and A-319 Airplanes using Feed Forward Neural Networks

    NASA Technical Reports Server (NTRS)

    Jafri, Madiha; Ely, Jay; Vahala, Linda

    2006-01-01

    Neural Network Modeling is introduced in this paper to classify and predict Interference Path Loss measurements on Airbus 319 and 320 airplanes. Interference patterns inside the aircraft are classified and predicted based on the locations of the doors, windows, aircraft structures and the communication/navigation system-of-concern. Modeled results are compared with measured data and a plan is proposed to enhance the modeling for better prediction of electromagnetic coupling problems inside aircraft.

  4. 76 FR 61641 - Airworthiness Directives; Airbus Model A319-111, -112, and -132 Airplanes; Model A320-111, -211...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-05

    ... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will... reported on the overwing refueling aperture (used to fill the fuel tank by gravity) on the wing top skin... reported on the overwing refueling aperture (used to fill the fuel tank by gravity) on the wing top...

  5. 75 FR 31282 - Airworthiness Directives; Airbus Model A319-100, A320-200, A321-100, and A321-200 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-03

    ... May 12, 2006. The error resulted in an incorrect component maintenance manual number. This AD applies... repetitive inspections for corrosion in the inside and outside lower walls of each type A, D, E, and F.... SUPPLEMENTARY INFORMATION: On April 26, 2006, the FAA issued AD 2006- 09-11, Amendment 39-14582 (71 FR...

  6. 75 FR 3983 - Airworthiness Directives; Airbus Model A318 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... NPRM was published in the Federal Register on August 13, 2009 (74 FR 40776). That NPRM proposed to... Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant...-16180; AD 2010-02-09] RIN 2120-AA64 Airworthiness Directives; Airbus Model A318 Series Airplanes...

  7. 78 FR 25666 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-02

    ... proposed AD. Discussion On December 27, 2012, we issued AD 2012-26-51, Amendment 39-17312 (78 FR 1723... A318, A319, A320, and A321 series airplanes. Since we issued AD 2012-26-51, Amendment 39-17312 (78 FR... [which corresponds to FAA AD 2012-26-51, Amendment 39-17312 (78 FR 1723, January 9, 2013)] to...

  8. 14 CFR 121.1115 - Limit of validity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... A300-600 Series 30 30,000 FC/67,500 FH A310-200 Series 30 40,000 FC/60,000 FH A310-300 Series 30 35,000 FC/60,000 FH A318 Series 60 48,000 FC/60,000 FH A319 Series 60 48,000 FC/60,000 FH A320-100 Series 60 48,000 FC/48,000 FH A320-200 Series 60 48,000 FC/60,000 FH A321 Series 60 48,000 FC/60,000 FH...

  9. 14 CFR 129.115 - Limit of validity.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... A300 B4-2C, B4-103 30 40,000 FC A300 B4-203 30 34,000 FC A300-600 Series 30 30,000 FC/67,500 FH A310-200 Series 30 40,000 FC/60,000 FH A310-300 Series 30 35,000 FC/60,000 FH A318 Series 60 48,000 FC/60,000 FH A319 Series 60 48,000 FC/60,000 FH A320-100 Series 60 48,000 FC/48,000 FH A320-200 Series 60...

  10. Processing and Characterization of Functionally Graded Aluminum (A319)—SiCp Metallic Composites by Centrifugal Casting Technique

    NASA Astrophysics Data System (ADS)

    Jayakumar, E.; Jacob, Jibin C.; Rajan, T. P. D.; Joseph, M. A.; Pai, B. C.

    2016-08-01

    Functionally graded materials (FGM) are successfully adopted for the design and fabrication of engineering components with location-specific properties. The present study describes the processing and characterization of A319 Aluminum functionally graded metal matrix composites (FGMMC) with 10 and 15 wt pct SiCp reinforcements. The liquid stir casting method is used for composite melt preparation followed by FGMMC formation by vertical centrifugal casting method. The process parameters used are the mold preheating temperature of 523 K (250 °C), melt pouring temperature of 1013 K (740 °C), and mold rotation speed of 1300 rpm. The study analyzes the distribution and concentration of reinforcement particles in the radial direction of the FGMMC disk along with the effects of gradation on density, hardness, mechanical strength, the variation in coefficient of thermal expansion and the wear resistance properties at different zones. Microstructures of FGMMC reveal an outward radial gradient distribution of reinforcements forming different zones. Namely, matrix-rich inner, transition, particles-rich outer, and chill zone of a few millimeters thick at the outer most periphery of the casting are formed. From 10-FGM, a radial shift in the position of SiCp maxima is observed in 15-FGM casting. The mechanical characterization depicts enhanced properties for the particle-rich zone. The hardness shows a graded nature in correlation with particle concentration and a maximum of 94.4 HRB has been obtained at the particle-rich region of 15-FGM. In the particle-rich zone, the lowest CTE value of 20.1 µm/mK is also observed with a compressive strength of 650 MPa and an ultimate tensile strength of 279 MPa. The wear resistance is higher at the particle-rich zone of the FGMMC.

  11. Creep Properties of the As-Cast Al-A319 Alloy: T4 and T7 Heat Treatment Effects

    NASA Astrophysics Data System (ADS)

    Erfanian-Naziftoosi, Hamid R.; Rincón, Ernesto J.; López, Hugo F.

    2016-08-01

    In this work, the creep behavior of a commercial Al-A319 alloy was investigated in the temperature range of 413 K to 533 K (140 °C to 260 °C). Tensile creep specimens in the as-cast condition and after heat treating by solid solution (T4) and by aging (T7) were tested in a stress range varying from 60 to 170 MPa. It was found that steady-state creep strain rate was significantly low in the T7 condition when compared with either the T4 or as-cast alloy conditions. As a result, the time to failure behavior considerably increased. The experimentally determined creep exponents measured from the stress-strain curves were 4 for the as-cast alloy, 7.5 in the solid solution, and 9.5 after aging. In particular, after solid solution a grain substructure was found to develop which indicated that creep in a constant subgrain structure was active, thus accounting for the n exponent of 7.5. In the aged condition, a stress threshold is considered to account for the power law creep exponent n of 9.5. Moreover, It was found that the creep activation energy values were rather similar for the alloys in the as-cast (134 kJ/mol) and T4 (146 kJ/mol) conditions. These values are close to the one corresponding to pure Al self-diffusion (143 kJ/mol). In the aged alloy, the apparent creep activation energy (202 kJ/mol) exceeded that corresponding to Al self-diffusion. This deviation in activation energy is attributed to the effect of temperature on the alloy elastic modulus. Microstructural observations using transmission electron microscopy provided further support for the various dislocation-microstructure interactions exhibited by the alloy under the investigated creep conditions and implemented heat treatments.

  12. Overbeaming and overlapping of volume-scan CT with tube current modulation in a 320-detector row CT scanner

    NASA Astrophysics Data System (ADS)

    Liao, Ying-Lan; Chen, Yan-Shi; Lai, Nan-Ku; Chuang, Keh-Shih; Tsai, Hui-Yu

    2014-11-01

    The purpose of this study was to evaluate the performance of volume scan tube current modulation (VS-ATCM) with adaptive iterative dose reduction 3D (AIDR3D) technique in abdomen CT examinations. We scanned an elliptical cone-shaped phantom utilizing AIDR3D technique combined with VS-ATCM mode in a 320-detector row CT scanner. The image noise distributions with conventional filtered back-projction (FBP) technique and those with AIDR3D technique were compared. The radiation dose profile and tube current time product (mAs) in three noise levels of VS-ATCM modes were compared. The radiation beam profiles of five preset scan lengths were measured using Gafchromic film strips to assess the effects of overbeaming and everlapping. The results indicated that the image noises with AIDR3D technique was 13-74% lower than those in FBP technique. The mAs distributions can be a prediction for various abdominal sizes when undergoing a VS-ATCM mode scan. Patients can receive the radiation dose of overbeaming and overlapping during the VS-ATCM mode scans.

  13. Simulation of the concomitant process of nucleation-growth-coarsening of Al2Cu particles in a 319 foundry aluminum alloy

    NASA Astrophysics Data System (ADS)

    Martinez, R.; Larouche, D.; Cailletaud, G.; Guillot, I.; Massinon, D.

    2015-06-01

    The precipitation of Al2Cu particles in a 319 T7 aluminum alloy has been modeled. A theoretical approach enables the concomitant computation of nucleation, growth and coarsening. The framework is based on an implicit scheme using the finite differences. The equation of continuity is discretized in time and space in order to obtain a matricial form. The inversion of a tridiagonal matrix gives way to determining the evolution of the size distribution of Al2Cu particles at t  +Δt. The fluxes of in-between the boundaries are computed in order to respect the conservation of the mass of the system, as well as the fluxes at the boundaries. The essential results of the model are compared to TEM measurements. Simulations provide quantitative features on the impact of the cooling rate on the size distribution of particles. They also provide results in agreement with the TEM measurements. This kind of multiscale approach allows new perspectives to be examined in the process of designing highly loaded components such as cylinder heads. It enables a more precise prediction of the microstructure and its evolution as a function of continuous cooling rates.

  14. Patient radiation dose in prospectively gated axial CT coronary angiography and retrospectively gated helical technique with a 320-detector row CT scanner

    SciTech Connect

    Seguchi, Shigenobu; Aoyama, Takahiko; Koyama, Shuji; Fujii, Keisuke; Yamauchi-Kawaura, Chiyo

    2010-11-15

    Purpose: The aim of this study was to evaluate radiation dose to patients undergoing computed tomography coronary angiography (CTCA) for prospectively gated axial (PGA) technique and retrospectively gated helical (RGH) technique. Methods: Radiation doses were measured for a 320-detector row CT scanner (Toshiba Aquilion ONE) using small sized silicon-photodiode dosimeters, which were implanted at various tissue and organ positions within an anthropomorphic phantom for a standard Japanese adult male. Output signals from photodiode dosimeters were read out on a personal computer, from which organ and effective doses were computed according to guidelines published in the International Commission on Radiological Protection Publication 103. Results: Organs that received high doses were breast, followed by lung, esophagus, and liver. Breast doses obtained with PGA technique and a phase window width of 16% at a simulated heart rate of 60 beats per minute were 13 mGy compared to 53 mGy with RGH technique using electrocardiographically dependent dose modulation at the same phase window width as that in PGA technique. Effective doses obtained in this case were 4.7 and 20 mSv for the PGA and RGH techniques, respectively. Conversion factors of dose length product to the effective dose in PGA and RGH were 0.022 and 0.025 mSv mGy{sup -1} cm{sup -1} with a scan length of 140 mm. Conclusions: CTCA performed with PGA technique provided a substantial effective dose reduction, i.e., 70%-76%, compared to RGH technique using the dose modulation at the same phase windows as those in PGA technique. Though radiation doses in CTCA with RGH technique were the same level as, or some higher than, those in conventional coronary angiography (CCA), the use of PGA technique reduced organ and effective doses to levels less than CCA except for breast dose.

  15. Effects of UV-A (320 to 399 Nanometers) on Grazing Pressure of a Marine Heterotrophic Nanoflagellate on Strains of the Unicellular Cyanobacteria Synechococcus spp.

    PubMed Central

    Ochs, Clifford A.; Eddy, Laura P.

    1998-01-01

    In the open ocean, where turbidity is very low, UV radiation may be an important factor regulating interactions among planktonic microorganisms. The effect of exposure to UV radiation on grazing by a commonly isolated marine heterotrophic nanoflagellate, Paraphysomonas bandaiensis, on two strains of the cyanobacteria Synechococcus spp. was investigated. Laboratory cultures were exposed to a range of irradiances of artificially produced UV-B (290 to 319 nm) and UV-A (320 to 399 nm) for up to 10 h. At a UV-B irradiance of 0.19 W m−2, but not 0.12 W m−2, grazing mortality of Synechococcus spp. and nanoflagellate-specific grazing rates were reduced compared to mortality and grazing rates with UV-A treatment. Within 6 h of exposure, UV-A alone suppressed grazing mortality at irradiances as low as 3.02 W m−2. The extent to which grazing mortality and nanoflagellate-specific grazing rates were suppressed by UV-A increased with both irradiance and duration of exposure. Over a 6-h exposure period, differences in grazing mortality were largely attributable to differential survival of nanoflagellates. Over a longer period of exposure, there was impairment by UV-A alone of nanoflagellate-specific grazing rates. Rates of primary productivity of Synechococcus spp. were also reduced by UV-A. The extent to which Synechococcus productivity was reduced, compared to the reduction in Synechococcus grazing mortality, depended on the duration of UV-A exposure. These results support the hypothesis that UV-A alone influences the composition and biomass of marine microbial communities by affecting predator-prey interactions and primary production. PMID:16349489

  16. 76 FR 72350 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-23

    ... should have been removed by repair machining was below the level of detectability of the Non Destructive... proposed AD. Discussion On March 31, 2008, we issued AD 2008-08-04, Amendment 39-15456 (73 FR 19975, April..., A319, A320, and A321 airplanes. Since we issued AD 2008-08-04, Amendment 39-15456 (73 FR 19975,...

  17. 78 FR 41286 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-10

    ... airplanes). (2) Airbus Service Bulletin A320-32-1346, Revision 02, dated November 4, 2009 (for Model A318... NPRM was published in the Federal Register on October 3, 2012 (77 FR 60331). The NPRM proposed to... issued AD 2007-0065, currently at Revision 2. For the reasons described above, this AD...

  18. 76 FR 50113 - Airworthiness Directives; Airbus Model A320-214, -232, and -233 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-12

    ... published in the Federal Register on April 8, 2011 (76 FR 19714). That NPRM proposed to correct an unsafe... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3... production to simplify the ELAC2 and Trimmable Horizontal Stabiliser (THS) Motor 1 stand by power...

  19. 76 FR 19714 - Airworthiness Directives; Airbus Model A320-214, -232, and -233 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will... ELAC2 and Trimmable Horizontal Stabiliser (THS) Motor 1 stand by power supply logic. Results from a... a modification of the electrical installation of ELAC2 and THS Motor 1 power supply, restoring...

  20. X-ray imaging using a 320 x 240 hybrid GaAs pixel detector

    SciTech Connect

    Irsigler, R.; Andersson, J.; Alverbro, J.

    1999-06-01

    The authors present room temperature measurements on 200 {micro}m thick GaAs pixel detectors, which were hybridized to silicon readout circuits. The whole detector array contains 320 x 240 square shaped pixel with a pitch of 38 {micro}m and is based on semi-insulating liquid-encapsulated Czochralski (LEC) GaAs material. After fabricating and dicing, the detector chips were indium bump flip chip bonded to CMOS readout circuits based on charge integration and finally evaluated. This readout chip was originally designed for the readout of flip chip bonded infrared detectors, but appears to be suitable for X-ray applications as well. A bias voltage between 50 V and 100 V was sufficient to operate the detector at room temperature. The detector array did respond to x-ray radiation by an increase in current due to production of electron hole pairs by the ionization processes. Images of various objects and slit patterns were acquired by using a standard X-ray source for dental imaging. The new X-ray hybrid detector was analyzed with respect to its imaging properties. Due to the high absorption coefficient for X-rays in GaAs and the small pixel size, the sensor shows a high modulation transfer function up to the Nyquist frequency.

  1. Implementation and characterization of a 320-slice volumetric CT scanner for simulation in radiation oncology

    SciTech Connect

    Coolens, C.; Breen, S.; Purdie, T. G.; Owrangi, A.; Publicover, J.; Bartolac, S.; Jaffray, D. A.

    2009-11-15

    Purpose: Effective target definition and broad employment of treatment response assessment with dynamic contrast-enhanced CT in radiation oncology requires increased speed and coverage for use within a single bolus injection. To this end, a novel volumetric CT scanner (Aquilion One, Toshiba, Tochigi Pref., Japan) has been installed at the Princess Margaret Hospital for implementation into routine CT simulation. This technology offers great advantages for anatomical and functional imaging in both scan speed and coverage. The aim of this work is to investigate the system's imaging performance and quality as well as CT quantification accuracy which is important for radiotherapy dose calculations. Methods: The 320-slice CT scanner uses a 160 mm wide-area (2D) solid-state detector design which provides the possibility to acquire a volumetric axial length of 160 mm without moving the CT couch. This is referred to as ''volume'' and can be scanned with a rotation speed of 0.35-3 s. The scanner can also be used as a 64-slice CT scanner and perform conventional (axial) and helical acquisitions with collimation ranges of 1-32 and 16-32 mm, respectively. Commissioning was performed according to AAPM Reports TG 66 and 39 for both helical and volumetric imaging. Defrise and other cone-beam image analysis tests were performed. Results: Overall, the imaging spatial resolution and geometric efficiency (GE) were found to be very good (>10 lp/mm, <1 mm spatial integrity and GE{sub 160mm}=85%) and within the AAPM guidelines as well as IEC recommendations. Although there is evidence of some cone-beam artifacts when scanning the Defrise phantom, image quality was found to be good and sufficient for treatment planning (soft tissue noise <10 HU). Measurements of CT number stability and contrast-to-noise values across the volume indicate clinically acceptable scan accuracy even at the field edge. Conclusions: Initial experience with this exciting new technology confirms its accuracy for routine CT simulation within radiation oncology and allows for future investigations into specialized dynamic volumetric imaging applications.

  2. Radiation dose assessment in a 320-detector-row CT scanner used in cardiac imaging

    SciTech Connect

    Goma, Carles; Ruiz, Agustin; Jornet, Nuria; Latorre, Artur; Pallerol, Rosa M.; Carrasco, Pablo; Eudaldo, Teresa; Ribas, Montserrat

    2011-03-15

    Purpose: In the present era of cone-beam CT scanners, the use of the standardized CTDI{sub 100} as a surrogate of the idealized CTDI is strongly discouraged and, consequently, so should be the use of the dose-length product (DLP) as an estimate of the total energy imparted to the patient. However, the DLP is still widely used as a reference quantity to normalize the effective dose for a given scan protocol mainly because the CTDI{sub 100} is an easy-to-measure quantity. The aim of this article is therefore to describe a method for radiation dose assessment in large cone-beam single axial scans, which leads to a straightforward estimation of the total energy imparted to the patient. The authors developed a method accessible to all medical physicists and easy to implement in clinical practice in an attempt to update the bridge between CT dosimetry and the estimation of the effective dose. Methods: The authors used commercially available material and a simple mathematical model. The method described herein is based on the dosimetry paradigm introduced by the AAPM Task Group 111. It consists of measuring the dose profiles at the center and the periphery of a long body phantom with a commercial solid-state detector. A weighted dose profile is then calculated from these measurements. To calculate the CT dosimetric quantities analytically, a Gaussian function was fitted to the dose profile data. Furthermore, the Gaussian model has the power to condense the z-axis information of the dose profile in two parameters: The single-scan central dose, f(0), and the width of the profile, {sigma}. To check the energy dependence of the solid-state detector, the authors compared the dose profiles to measurements made with a small volume ion chamber. To validate the overall method, the authors compared the CTDI{sub 100} calculated analytically to the measurement made with a 100 mm pencil ion chamber. Results: For the central and weighted dose profiles, the authors found a good agreement between the measured dose profile data and the fitted Gaussian functions. The solid-state detector had no energy dependence--within the energy range of interest--and the analytical model succeeded in reproducing the absolute dose values obtained with the pencil ion chamber. For the case of large cone-beam single axial scans, the quantity that better characterizes the total energy imparted to the patient is the weighted dose profile integral (DPI{sub w}). The DPI{sub w} can be easily determined from the two parameters that define the Gaussian functions: f(0) and {sigma}. The authors found that the DLP underestimated the total energy imparted to the patient by more than 20%. The authors also found that the calculated CT dosimetric quantities were higher than those displayed on the scanner console. Conclusions: The authors described and validated a method to assess radiation dose in large cone-beam single axial scans. This method offers a simple and more accurate estimation of the total energy imparted to the patient, thus offering the possibility to update the bridge between CT dosimetry and the estimation of the effective dose for cone-beam CT examinations in radiology, nuclear medicine, and radiation therapy.

  3. Animal model for evaluation of topical photoprotection against ultraviolet A (320-380 nm) radiation

    SciTech Connect

    Chew, S.; DeLeo, V.A.; Harber, L.C.

    1987-10-01

    Recent studies reporting UVA (ultraviolet A radiation 320-380 nm) as an integral part of the cumulative sun-induced damage in human skin have prompted an interest in developing effective UVA photoprotective agents. The development of such compounds has been impeded by the absence of a clinically relevant animal model for evaluating their efficacy. This report describes the development and use of such a laboratory animal system. Selected concentrations of oxybenzone (2-hydroxy-4-methoxybenzophenone) in vehicle (0.1% to 6%) or vehicle alone were applied to the depilated dorsal skin of 30 Hartley strain female albino guinea pigs. The skin was irradiated with solar simulated UVA from a xenon light source. Acute radiation-induced damage was assayed by erythema grading and inhibition of (/sup 3/H)thymidine incorporation into epidermal DNA. Data from erythema grading studies indicated that a significant degree of photoprotection was achieved with 6%, 3%, and 1% solutions of benzophenone compared with the control vehicle; the 6% solution was significantly more photoprotective than the 3% and 1% solutions. A 6% solution afforded significant photoprotection when assayed by (/sup 3/H)thymidine incorporation.

  4. 78 FR 6198 - Special Conditions: Airbus, Model A318-112 Airplane (S/N 3238); Certification of Cooktops

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-30

    ... unusual design feature. Discussion Currently, ovens are the prevailing means of heating food on airplanes. Ovens are characterized by an enclosure that contains both the heat source and the food being heated... presence of relatively unrestrained hot cookware and heated food. These may represent unprecedented...

  5. 75 FR 35 - Special Conditions: Airbus Model A318-112 Airplane (S/N 3886); Certification of a Cooktop

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... be a novel or unusual design feature. Discussion Currently, ovens are the prevailing means of heating food on airplanes. Ovens are characterized by an enclosure that contains both the heat source and the food being heated. The hazards presented by ovens are thus inherently limited, and are well...

  6. 77 FR 51944 - Special Conditions: Airbus, Model A318-112 Airplane (S/N 3238); Certification of Cooktops

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-28

    ... Currently, ovens are the prevailing means of heating food on airplanes. Ovens are characterized by an enclosure that contains both the heat source and the food being heated. The hazards presented by ovens are... April 11, 2000 (65 FR 19477-19478), as well as at http://DocketsInfo.dot.gov/ . Docket:...

  7. Interference Path Loss Prediction in A319/320 Airplanes Using Modulated Fuzzy Logic and Neural Networks

    NASA Technical Reports Server (NTRS)

    Jafri, Madiha J.; Ely, Jay J.; Vahala, Linda L.

    2007-01-01

    In this paper, neural network (NN) modeling is combined with fuzzy logic to estimate Interference Path Loss measurements on Airbus 319 and 320 airplanes. Interference patterns inside the aircraft are classified and predicted based on the locations of the doors, windows, aircraft structures and the communication/navigation system-of-concern. Modeled results are compared with measured data. Combining fuzzy logic and NN modeling is shown to improve estimates of measured data over estimates obtained with NN alone. A plan is proposed to enhance the modeling for better prediction of electromagnetic coupling problems inside aircraft.

  8. Exploring the atomic structure and conformational flexibility of a 320 Å long engineered viral fiber using X-ray crystallography

    SciTech Connect

    Bhardwaj, Anshul; Casjens, Sherwood R.; Cingolani, Gino

    2014-02-01

    This study presents the crystal structure of a ∼320 Å long protein fiber generated by in-frame extension of its repeated helical coiled-coil core. Protein fibers are widespread in nature, but only a limited number of high-resolution structures have been determined experimentally. Unlike globular proteins, fibers are usually recalcitrant to form three-dimensional crystals, preventing single-crystal X-ray diffraction analysis. In the absence of three-dimensional crystals, X-ray fiber diffraction is a powerful tool to determine the internal symmetry of a fiber, but it rarely yields atomic resolution structural information on complex protein fibers. An 85-residue-long minimal coiled-coil repeat unit (MiCRU) was previously identified in the trimeric helical core of tail needle gp26, a fibrous protein emanating from the tail apparatus of the bacteriophage P22 virion. Here, evidence is provided that an MiCRU can be inserted in frame inside the gp26 helical core to generate a rationally extended fiber (gp26-2M) which, like gp26, retains a trimeric quaternary structure in solution. The 2.7 Å resolution crystal structure of this engineered fiber, which measures ∼320 Å in length and is only 20–35 Å wide, was determined. This structure, the longest for a trimeric protein fiber to be determined to such a high resolution, reveals the architecture of 22 consecutive trimerization heptads and provides a framework to decipher the structural determinants for protein fiber assembly, stability and flexibility.

  9. MT3250BA: a 320×256-50µm snapshot microbolometer ROIC for high-resistance detector arrays

    NASA Astrophysics Data System (ADS)

    Eminoglu, Selim; Akin, Tayfun

    2013-06-01

    This paper reports the development of a new microbolometer readout integrated circuit (MT3250BA) designed for high-resistance detector arrays. MT3250BA is the first microbolometer readout integrated circuit (ROIC) product from Mikro-Tasarim Ltd., which is a fabless IC design house specialized in the development of monolithic CMOS imaging sensors and ROICs for hybrid photonic imaging sensors and microbolometers. MT3250BA has a format of 320 × 256 and a pixel pitch of 50 µm, developed with a system-on-chip architecture in mind, where all the timing and biasing for this ROIC are generated on-chip without requiring any external inputs. MT3250BA is a highly configurable ROIC, where many of its features can be programmed through a 3-wire serial interface allowing on-the-fly configuration of many ROIC features. MT3250BA has 2 analog video outputs and 1 analog reference output for pseudo-differential operation, and the ROIC can be programmed to operate in the 1 or 2-output modes. A unique feature of MT3250BA is that it performs snapshot readout operation; therefore, the image quality will only be limited by the thermal time constant of the detector pixels, but not by the scanning speed of the ROIC, as commonly found in the conventional microbolometer ROICs performing line-by-line (rolling-line) readout operation. The signal integration is performed at the pixel level in parallel for the whole array, and signal integration time can be programmed from 0.1 µs up to 100 ms in steps of 0.1 µs. The ROIC is designed to work with high-resistance detector arrays with pixel resistance values higher than 250 kΩ. The detector bias voltage can be programmed on-chip over a 2 V range with a resolution of 1 mV. The ROIC has a measured input referred noise of 260 µV rms at 300 K. The ROIC can be used to build a microbolometer infrared sensor with an NETD value below 100 mK using a microbolometer detector array fabrication technology with a high detector resistance value (≥ 250 KΩ), a high TCR value (≥ 2.5 % / K), and a sufficiently low pixel thermal conductance (Gth ≤ 20 nW / K). The ROIC uses a single 3.3 V supply voltage and dissipates less than 75 mW in the 1-output mode at 60 fps. MT3250BA is fabricated using a mixed-signal CMOS process on 200 mm CMOS wafers, and tested wafers are available with test data and wafer map. A USB based compact test electronics and software are available for quick evaluation of this new microbolometer ROIC.

  10. Ultraviolet A (320-400 nm) modulation of ultraviolet B (290-320 nm)-induced immune suppression is mediated by carbon monoxide.

    PubMed

    Allanson, Munif; Reeve, Vivienne E

    2005-03-01

    Accumulating evidence suggests that suberythemogenic ultraviolet A (UVA) (320-400 nm) exposure protects against the immunosuppressive effect of ultraviolet B (290-320 nm) radiation or its epidermal photoproduct, cis-urocanic acid (cis-UCA). In skin, UVA photoimmunoprotection is mediated by the inducible antioxidant stress enzyme, heme oxygenase-1 (HO-1), which degrades heme into carbon monoxide (CO), iron, and biliverdin (reduced to bilirubin), and is important for cell survival under conditions of oxidative stress. The identity of the HO enzymatic product(s) that provide the immunoprotection is unknown. Here we examine the potential of CO to fulfill this role in hairless mouse skin, utilizing a novel CO-releasing molecule (CO-RM) to deliver CO to the skin topically. The CO-RM released CO gradually from the lotion vehicle during 3 h following its preparation, and between 50 and 500 microM, concentration-dependently protected mice against the suppression of contact hypersensitivity by either solar-simulated UV radiation (SSUVR) or cis-UCA, whereas aged CO-depleted CO-RM was inactive. Thus, the CO-RM treatment mimicked UVA-photoimmunoprotection, and identified HO-released CO as the protective mediator, providing evidence that the murine cutaneous immune system is modulated by this gaseous messenger. Preliminary evidence for involvement of guanylyl cyclase was obtained by treatment of the mouse with its specific inhibitor 1H-(1,2,4)oxadiazolo-(4,3-1)quinoxaline-1-one, which abrogated UVA photoimmunoprotection.

  11. A 320-year long series of Danube floods in Central Hungary (Budapest and Pest County): a frequency-magnitude-seasonality overview

    NASA Astrophysics Data System (ADS)

    Kiss, Andrea; Salinas, Jose; Bloeschl, Guenter

    2015-04-01

    The present paper is based on a recently developed database including contemporary original, administrative, legal and private source materials (published and archival) as well as media reports related to the floods occurred in the town of Budapest (historical towns of Pest, Buda) and Central Hungary (historical Pest-Pilis-Solt County). As for the archival evidence, main bases of investigation are the administrative sources such as town council protocols and county meeting protocols of Budapest and historical Pest-Pilis-Solt County: in these (legal-)administrative documents damaging events (natural/environmental hazards) were systematically recorded. Moreover, other source types such as taxation-related damage accounts as well as private and official reports, letters and correspondence (published, unpublished) were also included. Concerning published evidence, a most important source is flood reports in contemporary newspapers; however, other published sources (e.g. narratives, fund raising circulars etc.; both published and unpublished) also contained useful flood-related information. Beyond providing information on the strength and weaknesses of different sources types and the temporal and spatial distribution of evidence, a general background on the contemporary environmental and hydrological/hydromorphological conditions of the study area (and its changes during and after river regulations) are also provided. However, in the presentation the main focus is on the analysis of flood rich flood poor periods of the last more than 300 years; furthermore, the seasonality distribution as well as the magnitude of Danube flood events - and their spatial differences are discussed. In case of Budapest and Central Hungary, with respect to the greatest flood events, ice jam floods played a rather significant role before river regulation works. Due to this fact the main types of flood events (including their main causes), with special emphasis on ice jam floods, are discussed separate.

  12. Complete genome sequence of Lactobacillus plantarum ZS2058, a probiotic strain with high conjugated linoleic acid production ability.

    PubMed

    Yang, Bo; Chen, Haiqin; Tian, Fengwei; Zhao, Jianxin; Gu, Zhennan; Zhang, Hao; Chen, Yong Q; Chen, Wei

    2015-11-20

    Lactobacillus plantarum ZS2058 was isolated from sauerkraut and identified to synthesize the beneficial metabolite conjugated linoleic acid. The genome contains a 319,7363-bp chromosome and three plasmids. The sequence will facilitate identification and characterization of the genetic determinants for its putative biological benefits.

  13. 77 FR 9260 - Establishment of Dakota Grassland Conservation Area, North Dakota and South Dakota

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-16

    ... Fish and Wildlife Service Establishment of Dakota Grassland Conservation Area, North Dakota and South... public that the U.S. Fish and Wildlife Service (Service) has established the Dakota Grassland... Grassland Conservation Area on September 21, 2011, with the purchase of a 318.18-acre grassland easement...

  14. 78 FR 52414 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-23

    ... NPRM was published in the Federal Register on October 16, 2012 (77 FR 63270). The NPRM proposed to... an unsafe condition for the specified products. The MCAI states: During a quality check in production of an A320 family aeroplane, it was discovered that a fastener was missing at FR 24 between...

  15. 75 FR 81326 - Petition for Exemption; Summary of Petition Received

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... is requesting relief from the ] requirement to have a cockpit voice recorder and a flight data recorder that records all datalink messages as required by the certification rule for its Airbus A320-214... (65 FR 19477-78). Docket: To read background documents or comments received, go to...

  16. Best Evidence

    ERIC Educational Resources Information Center

    Samuels, Christina A.

    2005-01-01

    Brian Schaffer, now a 21-year-old college junior, spent prekindergarten through 7th grade at Green Acres School, a 320-student Rockville, Maryland, private school where his parents say he had the benefit of small class sizes and teachers who could accommodate his needs, which included attention deficit disorder, speech and language delays, and…

  17. Tractor Trailer Driver's Training Programs. Performance Report.

    ERIC Educational Resources Information Center

    New Hampshire Vocational Technical Coll., Nashua.

    This document describes a project to develop a 320-hour tractor trailer driver training program and a 20-hour commercial driver licensing upgrade training program. Of 34 graduates from the training program, 28 secured employment in the trucking industry. From August 1989 to June 1990, 725 students were trained in the upgrade training program with…

  18. IET. Control and equipment building (TAN620) floor plan. Schedule of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    IET. Control and equipment building (TAN-620) floor plan. Schedule of furniture and equipment. Ralph M. Parsons 902-4-ANP-A 320. Date: February 1954. Approved by INEEL Classification Office for public release. INEEL index code no. 035-0620-00-693-106905 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  19. Life-critical digital flight control systems

    NASA Technical Reports Server (NTRS)

    Mcwha, James

    1990-01-01

    Digital autopilot systems were first used on commercial airplanes in the late 1970s. The A-320 airplane was the first air transport airplane with a fly-by-wire primary flight control system. On the 767-X (777) airplane Boeing will install all fly-by-wire flight controls. Activities related to safety, industry status and program phases are discussed.

  20. 78 FR 12988 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-26

    ... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not... investigations have also concluded that A320 family THSA P/N 47145-XXX (where XXX stands for any numerical... lower splines of THSAs having P/N 47145-XXX to detect corrosion and, depending on findings,...

  1. 77 FR 26996 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-08

    ... airplanes. This proposed AD was prompted by reports that medium-head fasteners were installed in lieu of... demonstrated could have an affect on panel fatigue life. This proposed AD would require repetitive inspections... 35 in Airbus A320 final assembly line. Investigations revealed that medium head fasteners,...

  2. Development, testing, and certification of life sciences engineering solar collector

    NASA Technical Reports Server (NTRS)

    Caudle, J. M.

    1978-01-01

    Results are presented for the development of an air flat plate collector for use with solar heating, combined heating and cooling, and hot water systems. The contract was for final development, testing, and certification of the collector, and for delivery of a 320 square feet collector panel.

  3. 77 FR 63270 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-16

    ... of an A320 family aeroplane, it was discovered that a fastener was missing at FR 24 between stringer... aluminum rivet, Part Number (P/N) ASNA2050DXJ040, is to connect the FR 24 to the FR 24 Tee. The hole where... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in...

  4. Performance Evaluation of Thermographic Cameras for Photogrammetric Measurements

    NASA Astrophysics Data System (ADS)

    Yastikli, N.; Guler, E.

    2013-05-01

    The aim of this research is the performance evaluation of the termographic cameras for possible use for photogrammetric documentation and deformation analyses caused by moisture and isolation problem of the historical and cultural heritage. To perform geometric calibration of the termographic camera, the 3D test object was designed with 77 control points which were distributed in different depths. For performance evaluation, Flir A320 termographic camera with 320 × 240 pixels and lens with 18 mm focal length was used. The Nikon D3X SLR digital camera with 6048 × 4032 pixels and lens with 20 mm focal length was used as reference for comparison. The size of pixel was 25 μm for the Flir A320 termographic camera and 6 μm for the Nikon D3X SLR digital camera. The digital images of the 3D test object were recorded with the Flir A320 termographic camera and Nikon D3X SLR digital camera and the image coordinate of the control points in the images were measured. The geometric calibration parameters, including the focal length, position of principal points, radial and tangential distortions were determined with introduced additional parameters in bundle block adjustments. The measurement of image coordinates and bundle block adjustments with additional parameters were performed using the PHIDIAS digital photogrammetric system. The bundle block adjustment was repeated with determined calibration parameter for both Flir A320 termographic camera and Nikon D3X SLR digital camera. The obtained standard deviation of measured image coordinates was 9.6 μm and 10.5 μm for Flir A320 termographic camera and 8.3 μm and 7.7 μm for Nikon D3X SLR digital camera. The obtained standard deviation of measured image points in Flir A320 termographic camera images almost same accuracy level with digital camera in comparison with 4 times bigger pixel size. The obtained results from this research, the interior geometry of the termographic cameras and lens distortion was modelled efficiently

  5. Atomic Mass and Nuclear Binding Energy for Md-319 (Mendelevium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Md-319 (Mendelevium, atomic number Z = 101, mass number A = 319).

  6. Atomic Mass and Nuclear Binding Energy for Sg-319 (Seaborgium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Sg-319 (Seaborgium, atomic number Z = 106, mass number A = 319).

  7. Atomic Mass and Nuclear Binding Energy for Bh-319 (Bohrium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Bh-319 (Bohrium, atomic number Z = 107, mass number A = 319).

  8. Atomic Mass and Nuclear Binding Energy for No-319 (Nobelium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope No-319 (Nobelium, atomic number Z = 102, mass number A = 319).

  9. Atomic Mass and Nuclear Binding Energy for Hs-319 (Hassium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Hs-319 (Hassium, atomic number Z = 108, mass number A = 319).

  10. Atomic Mass and Nuclear Binding Energy for Es-319 (Einsteinium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Es-319 (Einsteinium, atomic number Z = 99, mass number A = 319).

  11. Atomic Mass and Nuclear Binding Energy for Fm-319 (Fermium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Fm-319 (Fermium, atomic number Z = 100, mass number A = 319).

  12. Atomic Mass and Nuclear Binding Energy for Mt-319 (Meitnerium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Mt-319 (Meitnerium, atomic number Z = 109, mass number A = 319).

  13. Atomic Mass and Nuclear Binding Energy for Md-318 (Mendelevium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Md-318 (Mendelevium, atomic number Z = 101, mass number A = 318).

  14. Atomic Mass and Nuclear Binding Energy for Sg-318 (Seaborgium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Sg-318 (Seaborgium, atomic number Z = 106, mass number A = 318).

  15. Atomic Mass and Nuclear Binding Energy for Bh-318 (Bohrium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Bh-318 (Bohrium, atomic number Z = 107, mass number A = 318).

  16. Atomic Mass and Nuclear Binding Energy for No-318 (Nobelium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope No-318 (Nobelium, atomic number Z = 102, mass number A = 318).

  17. Atomic Mass and Nuclear Binding Energy for Hs-318 (Hassium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Hs-318 (Hassium, atomic number Z = 108, mass number A = 318).

  18. Atomic Mass and Nuclear Binding Energy for Es-318 (Einsteinium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Es-318 (Einsteinium, atomic number Z = 99, mass number A = 318).

  19. Atomic Mass and Nuclear Binding Energy for Fm-318 (Fermium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Fm-318 (Fermium, atomic number Z = 100, mass number A = 318).

  20. Atomic Mass and Nuclear Binding Energy for Mt-318 (Meitnerium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Mt-318 (Meitnerium, atomic number Z = 109, mass number A = 318).

  1. Utilization of lasers for air data measurements

    NASA Astrophysics Data System (ADS)

    Hammer, J.

    1991-05-01

    The operating principles of the ALEV3 three axis laser Doppler anemometer, which was designed for flight tests with the A-320 and A-340 aircraft, are depicted. If mounted on the aircraft center of gravity, the ALEV-3 allows true flight velocity in three directions and angles of attack and sideslip to be directly measured with a very good accuracy, in particular flight areas such as limit buffeting, stall, high Mach numbers, or sideslip flights. Aircraft parameter estimation, calculation, and calibration results are presented. The accuracies of velocity, static pressure and aerodynamic angle measurements were compared with classical anemometers precisions. Flight tests results of the ALEV-1 one axis laser anemometer for A-320 are given as a reference.

  2. Jeans instability criterion from the viewpoint of Kaniadakis' statistics

    NASA Astrophysics Data System (ADS)

    Abreu, Everton M. C.; Ananias Neto, Jorge; Barboza, Edesio M., Jr.; Nunes, Rafael C.

    2016-06-01

    In this letter we have derived the Jeans length in the context of the Kaniadakis statistics. We have compared this result with the Jeans length already obtained in the nonextensive Tsallis statistics (Jiulin D., Phys. Lett. A, 320 (2004) 347) and we discussed the main differences between these two models. We have also obtained the κ-sound velocity. Finally, we have applied the results obtained here to analyze an astrophysical system.

  3. List Models of Procedure Learning

    NASA Technical Reports Server (NTRS)

    Matessa, Michael P.; Polson, Peter G.

    2005-01-01

    This paper presents a new theory of the initial stages of skill acquisition and then employs the theory to model current and future training programs for fight management systems (FMSs) in modern commercial airliners like the Boeing 777 and the Airbus A320. The theoretical foundations for the theory are a new synthesis of the literature on human memory and the latest version of the ACT-R theory of skill acquisition.

  4. Mid-Wave and Long-Wave Infrared Dualband Megapixel QWIP Focal Plane Array

    NASA Technical Reports Server (NTRS)

    Gunapala, S. D.; Bandara, S. V.; Liu, J. K.; Mumolo, J. M.; Hill, C. J.; Ting, D. Z.; Kurth, E.; Woolaway, J.; LeVan, P. D.; Tidrow, M. Z.

    2008-01-01

    Mid-wavelength infrared (MWIR) and long-wavelength infrared (LWIR) 1024x1024 pixel InGaAs/GaAs/AlGaAs based quantum well infrared photodetector (QWIP) focal planes and a 320x256 pixel dual-band pixel co-registered simultaneous QWIP focal plane array have been demonstrated as pathfinders. In this paper, we discuss the development of 1024x1024 MWIR/LWIR dual-band pixel co-registered simultaneous QWIP focal plane array.

  5. The electromagnetic environment in CFC structures

    NASA Technical Reports Server (NTRS)

    Hardwick, C. J.; Haigh, S. J.

    1991-01-01

    Extensive measurements of induced voltages and currents were made using a CFC (carbon fiber composites) horizontal stabilizer from the A320 as a test bed. The work was done to investigate the efficacy of various protection schemes to reduce the magnitudes of the induced voltages and validate a computer program INDCAL. Results indicate that a good understanding of the various induced voltage mechanisms including the long wave effect due to current redistribution was obtained.

  6. CT angiography of neonates and infants: comparison of radiation dose and image quality of target mode prospectively ECG-gated 320-MDCT and ungated helical 64-MDCT.

    PubMed

    Jadhav, Siddharth P; Golriz, Farahnaz; Atweh, Lamya A; Zhang, Wei; Krishnamurthy, Rajesh

    2015-02-01

    OBJECTIVE. The purpose of this study was to evaluate the radiation dose and image quality of target mode prospectively ECG-gated volumetric CT angiography (CTA) performed with a 320-MDCT scanner compared with the radiation dose and image quality of ungated helical CTA performed with a 64-MDCT scanner. MATERIALS AND METHODS. An experience with CTA for cardiovascular indications in neonates and infants 0-6 months old was retrospectively assessed. Radiation doses and quantitative and qualitative image quality scores of 28 CTA examinations performed with a 320-MDCT scanner and volumetric target mode prospective ECG gating plus iterative reconstruction (target mode) were compared with the doses and scores of 28 CTA examinations performed with a 64-MDCT scanner and ungated helical scanning plus filtered back projection reconstruction (ungated mode). All target mode studies were performed during free breathing. Seven ungated CTA examinations (25%) were performed with general endotracheal anesthesia. The findings of 17 preoperative CTA examinations performed in target mode were also compared with surgical reports for evaluation of diagnostic accuracy. RESULTS. All studies performed with target mode technique were diagnostic for the main clinical indication. Effective doses were significantly lower in the target mode group (0.51 ± 0.19 mSv) compared with the ungated mode group (4.8 ± 1.4 mSv) (p < 0.0001). Quantitative analysis revealed no statistically significant difference between the two groups with respect to signal-to-noise ratio (of pulmonary artery and aorta) and contrast-to-noise ratio. Subjective image quality was significantly better with target mode than with ungated mode (p < 0.0001). CONCLUSION. Target mode prospectively ECG-gated volumetric scanning with iterative reconstruction performed with a 320-MDCT scanner has several benefits in cardiovascular imaging of neonates and infants, including low radiation dose, improved image quality, high diagnostic

  7. Contrail ice particles in aircraft wakes and their climatic importance

    NASA Astrophysics Data System (ADS)

    Schumann, Ulrich; JeßBerger, Philipp; Voigt, Christiane

    2013-06-01

    Measurements of gaseous (NO, NOy, SO2, HONO) and ice particle concentrations in young contrails in primary and secondary wakes of aircraft of different sizes (B737, A319, A340, A380) are used to investigate ice particle formation behind aircraft. The gas concentrations are largest in the primary wake and decrease with increasing altitude in the secondary wake, as expected for passive trace gases and aircraft-dependent dilution. In contrast, the measured ice particle concentrations were found larger in the secondary wake than in the primary wake. The contrails contain more ice particles than expected for previous black carbon (soot) estimates. The ice concentrations may result from soot-induced ice nucleation for a soot number emission index of 1015 kg-1. For a doubled ice particle concentration in young contrails, a contrail cirrus model computes about 60% increases of global radiative forcing by contrail cirrus because of simultaneous increases in optical depth, age, and cover.

  8. Atomic Mass and Nuclear Binding Energy for Md-320 (Mendelevium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Md-320 (Mendelevium, atomic number Z = 101, mass number A = 320).

  9. Atomic Mass and Nuclear Binding Energy for Sg-320 (Seaborgium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Sg-320 (Seaborgium, atomic number Z = 106, mass number A = 320).

  10. Atomic Mass and Nuclear Binding Energy for Bh-320 (Bohrium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Bh-320 (Bohrium, atomic number Z = 107, mass number A = 320).

  11. Atomic Mass and Nuclear Binding Energy for No-320 (Nobelium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope No-320 (Nobelium, atomic number Z = 102, mass number A = 320).

  12. AlliedSignal driver's viewer enhancement (DVE) for paramilitary and commercial applications

    NASA Astrophysics Data System (ADS)

    Emanuel, Michael; Caron, Hubert; Kovacevic, Branislav; Faina-Cherkaoui, Marcela; Wrobel, Leslie; Turcotte, Gilles

    1999-07-01

    AlliedSignal Driver's Viewer Enhancement (DVE) system is a thermal imager using a 320 X 240 uncooled microbolometer array. This high performance system was initially developed for military combat and tactical wheeled vehicles. It features a very small sensor head remotely mounted from the display, control and processing module. The sensor head has a modular design and is being adapted to various commercial applications such as truck and car-driving aid, using specifically designed low cost optics. Tradeoffs in the system design, system features and test results are discussed in this paper. A short video shows footage of the DVE system while driving at night.

  13. Atomic Mass and Nuclear Binding Energy for Hs-320 (Hassium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Hs-320 (Hassium, atomic number Z = 108, mass number A = 320).

  14. Hybrid stable-unstable resonators for diffusion-cooled CO(2) slab lasers.

    PubMed

    Lapucci, A; Labate, A; Rossetti, F; Mascalchi, S

    1996-06-20

    We present the numerical and experimental study that we carried out to compare the performances of two hybrid stable-unstable resonators for diffusion-cooled CO(2) slab lasers. The two resonators are designed to fit a 320 mm × 60 mm ×2 mm rf-discharge channel and are both guided in the narrow transverse direction. They differ in the other transverse direction, consisting of a positive- or a negative-branch unstable resonator scheme. The two solutions have been characterized in terms of modal structure, power extraction, stability, and quality of the extracted beam. PMID:21102698

  15. Atomic Mass and Nuclear Binding Energy for Es-320 (Einsteinium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Es-320 (Einsteinium, atomic number Z = 99, mass number A = 320).

  16. Atomic Mass and Nuclear Binding Energy for Fm-320 (Fermium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Fm-320 (Fermium, atomic number Z = 100, mass number A = 320).

  17. Designing with advanced composites; Report on the European Core Conference, 1st, Zurich, Switzerland, Oct. 20, 21, 1988, Conference Papers

    SciTech Connect

    Not Available

    1988-01-01

    The present conference discusses the development history of sandwich panel construction, production methods and quality assurance for Nomex sandwich panel core papers, the manufacture of honeycomb cores, state-of-the-art design methods for honeycomb-core panels, the Airbus A320 airliner's CFRP rudder structure, and the design tradeoffs encountered in honeycomb-core structures' design. Also discussed are sandwich-construction aircraft cabin interiors meeting new FAA regulations, the use of Nomex honeycomb cores in composite structures, a low-cost manufacturing technique for sandwich structures, and the Starship sandwich panel-incorporating airframe primary structure.

  18. Atomic Mass and Nuclear Binding Energy for Mt-320 (Meitnerium)

    NASA Astrophysics Data System (ADS)

    Sukhoruchkin, S. I.; Soroko, Z. N.

    This document is part of the Supplement containing the complete sets of data of Subvolume B `Nuclei with Z = 55 - 100' of Volume 22 `Nuclear Binding Energies and Atomic Masses' of Landolt-Börnstein - Group I `Elementary Particles, Nuclei and Atoms', and additionally including data for nuclei with Z = 101 - 130. It provides atomic mass, mass excess, nuclear binding energy, nucleon separation energies, Q-values, and nucleon residual interaction parameters for atomic nuclei of the isotope Mt-320 (Meitnerium, atomic number Z = 109, mass number A = 320).

  19. Isolation of novel non-HLA gene fragments from the hemochromatosis region (6p21.3) by cDNA hybridization selection.

    PubMed Central

    Goei, V. L.; Parimoo, S.; Capossela, A.; Chu, T. W.; Gruen, J. R.

    1994-01-01

    It has previously been shown that cDNA hybridization selection can identify and recover novel genes from large cloned genomic DNA such as cosmids or YACs. In an effort to identify candidate genes for hemochromatosis, this technique was applied to a 320-kb YAC containing the HLA-A gene. A short fragment cDNA library derived from human duodenum was selected with the YAC DNA. Ten novel gene fragments were isolated, characterized, and localized on the physical map of the YAC. Images Figure 2 Figure 4 PMID:8304341

  20. Molecular assembly of superquenchers in signaling molecular interactions.

    PubMed

    Yang, Chaoyong James; Lin, Hui; Tan, Weihong

    2005-09-21

    We have designed a novel molecular assembly of quencher molecules to form superquenchers with excellent quenching efficiency. The superquencher can be engineered as desired by assembling different types and different numbers of quencher molecules. By labeling a superquencher to a molecular beacon, a 320-fold enhancement of fluorescent signal was achieved, compared to about 14-fold from a molecular beacon prepared with the same monomer quencher. Our molecular assembly approach can effectively improve the sensitivity of a variety of fluorescent assays and can be widely useful for molecular interaction studies.

  1. Lidar measurement of constituents of microparticles in air by laser-induced breakdown spectroscopy using femtosecond terawatt laser pulses.

    PubMed

    Fujii, Takashi; Goto, Naohiko; Miki, Megumu; Nayuki, Takuya; Nemoto, Koshichi

    2006-12-01

    We experimentally demonstrated remote sensing of the constituents of microparticles in air by combining laser-induced breakdown spectroscopy (LIBS) and lidar, using femtosecond terawatt laser pulses. Laser pulses of 70 fs duration and 130 mJ energy generated filaments when focused at a focal length of 20 m and the pulses irradiated artificial saltwater aerosols in air at a 10 Hz pulse repetition rate. Na fluorescence was observed remotely at a distance of 16 m using a 318 mm diameter Newtonian telescope, a spectrometer, and an intensified CCD camera. These results show the possibility of remote measurement of the constituents of atmospheric particles, such as aerosols, clouds, and toxic materials, by LIBS-lidar using femtosecond terawatt laser pulses.

  2. Precision top-quark mass measurement in the lepton+jets topology in p p collisions at square root s=1.96 TeV.

    PubMed

    Abulencia, A; Acosta, D; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Ambrose, D; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arguin, J-F; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Bachacou, H; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Bedeschi, F; Behari, S; Belforte, S; Bellettini, G; Bellinger, J; Belloni, A; Ben-Haim, E; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bishai, M; Blair, R E; Blocker, C; Bloom, K; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Bourov, S; Boveia, A; Brau, B; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carlsmith, D; Carosi, R; Carron, S; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chapman, J; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Chu, P H; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciljak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Connolly, A; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Cruz, A; Cuevas, J; Culbertson, R; Currat, C; Cyr, D; DaRonco, S; D'Auria, S; D'onofrio, M; Dagenhart, D; de Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; Dell'Orso, M; Demers, S; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Dionisi, C; Dittmann, J; DiTuro, P; Dörr, C; Dominguez, A; Donati, S; Donega, M; Dong, P; Donini, J; Dorigo, T; Dube, S; Ebina, K; Efron, J; Ehlers, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Flores-Castillo, L R; Foland, A; Forrester, S; Foster, G W; Franklin, M; Freeman, J C; Fujii, Y; Furic, I; Gajjar, A; Gallinaro, M; Galyardt, J; Garcia, J E; Garcia Sciveres, M; Garfinkel, A F; Gay, C; Gerberich, H; Gerchtein, E; Gerdes, D; Giagu, S; Giannetti, P; Gibson, A; Gibson, K; Ginsburg, C; Giolo, K; Giordani, M; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Gotra, Y; Goulianos, K; Gresele, A; Griffiths, M; Grinstein, S; Grosso-Pilcher, C; Grundler, U; da Costa, J Guimaraes; Haber, C; Hahn, S R; Hahn, K; Halkiadakis, E; Hamilton, A; Han, B-Y; Handler, R; Happacher, F; Hara, K; Hare, M; Harper, S; Harr, R F; Harris, R M; Hatakeyama, K; Hauser, J; Hays, C; Hayward, H; Heijboer, A; Heinemann, B; Heinrich, J; Hennecke, M; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Huston, J; Ikado, K; Incandela, J; Introzzi, G; Iori, M; Ishizawa, Y; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jensen, H; Jeon, E J; Jones, M; Joo, K K; Jun, S Y; Junk, T R; Kamon, T; Kang, J; Karagoz-Unel, M; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, M S; Kim, S B; Kim, S H; Kim, Y K; Kirby, M; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kobayashi, H; Kondo, K; Kong, D J; Konigsberg, J; Kordas, K; Korytov, A; Kotwal, A V; Kovalev, A; Kraus, J; Kravchenko, I; Kreps, M; Kreymer, A; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kuhlmann, S E; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; Lecci, C; LeCompte, T; Lee, J; Lee, J; Lee, S W; Lee, Y J; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Li, K; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Liss, T M; Lister, A; Litvintsev, D O; Liu, T; Liu, Y; Lockyer, N S; Loginov, A; Loreti, M; Loverre, P; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Maksimovic, P; Manca, G; Margaroli, F; Marginean, R; Marino, C; Martin, A; Martin, M; Martin, V; Martínez, M; Maruyama, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McGivern, D; McIntyre, P; McNamara, P; McNulty, R; Mehta, A; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; von der Mey, M; Miao, T; Miladinovic, N; Miles, J; Miller, R; Miller, J S; Mills, C; Milnik, M; Miquel, R; Miscetti, S; Mitselmakher, G; Miyamoto, A; Moggi, N; Mohr, B; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Mulhearn, M; Muller, Th; Mumford, R; Murat, P; Nachtman, J; Nahn, S; Nakano, I; Napier, A; Naumov, D; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nigmanov, T; Nodulman, L; Norniella, O; Ogawa, T; Oh, S H; Oh, Y D; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Paoletti, R; Papadimitriou, V; Papikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pitts, K; Plager, C; Pondrom, L; Pope, G; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Rakitin, A; Rappoccio, S; Ratnikov, F; Reisert, B; Rekovic, V; van Remortel, N; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Rinnert, K; Ristori, L; Robertson, W J; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Rott, C; Ruiz, A; Russ, J; Rusu, V; Ryan, D; Saarikko, H; Sabik, S; Safonov, A; Sakumoto, W K; Salamanna, G; Salto, O; Saltzberg, D; Sanchez, C; Santi, L; Sarkar, S; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Semeria, F; Sexton-Kennedy, L; Sfiligoi, I; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Siegrist, J; Sill, A; Sinervo, P; Sisakyan, A; Sjolin, J; Skiba, A; Slaughter, A J; Sliwa, K; Smirnov, D; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sumorok, K; Sun, H; Suzuki, T; Taffard, A; Tafirout, R; Takashima, R; Takeuchi, Y; Takikawa, K; Tanaka, M; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Tether, S; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tollefson, K; Tomura, T; Tonelli, D; Tönnesmann, M; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuchiya, R; Tsuno, S; Turini, N; Ukegawa, F; Unverhau, T; Uozumi, S; Usynin, D; Vacavant, L; Vaiciulis, A; Vallecorsa, S; Varganov, A; Vataga, E; Velev, G; Veramendi, G; Veszpremi, V; Vickey, T; Vidal, R; Vila, I; Vilar, R; Vollrath, I; Volobouev, I; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, W; Wallny, R; Walter, T; Wan, Z; Wang, M J; Wang, S M; Warburton, A; Ward, B; Waschke, S; Waters, D; Watts, T; Weber, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Worm, S; Wright, T; Wu, X; Wynne, S M; Xie, S; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, Y; Yang, C; Yang, U K; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zetti, F; Zhang, X; Zhou, J; Zucchelli, S

    2006-01-20

    We report two measurements of the top-quark mass M(top) using the CDF II detector at the Fermilab Tevatron in a 318 pb(-1) data sample of tt events in the lepton+jets final state. One method uses an event-based likelihood technique resulting in M(top) = 173.2(-2.4)(+2.6)(stat) +/- 3.2(syst) GeV/c2 or 173.2(-4.0)(+4.1) GeV/c2. The second method reconstructs a top-quark mass in each event using the measured invariant mass of the hadronically decaying W boson to constrain the jet energy scale to obtain a value for M(top)of 173.5(-3.6)(+3.7)(stat) +/- 1.3(syst) GeV/c2 or 173.5(-3.8)(+3.9) GeV/c2 . We take the latter, which is more precise, as our result.

  3. Lidar measurement of constituents of microparticles in air by laser-induced breakdown spectroscopy using femtosecond terawatt laser pulses.

    PubMed

    Fujii, Takashi; Goto, Naohiko; Miki, Megumu; Nayuki, Takuya; Nemoto, Koshichi

    2006-12-01

    We experimentally demonstrated remote sensing of the constituents of microparticles in air by combining laser-induced breakdown spectroscopy (LIBS) and lidar, using femtosecond terawatt laser pulses. Laser pulses of 70 fs duration and 130 mJ energy generated filaments when focused at a focal length of 20 m and the pulses irradiated artificial saltwater aerosols in air at a 10 Hz pulse repetition rate. Na fluorescence was observed remotely at a distance of 16 m using a 318 mm diameter Newtonian telescope, a spectrometer, and an intensified CCD camera. These results show the possibility of remote measurement of the constituents of atmospheric particles, such as aerosols, clouds, and toxic materials, by LIBS-lidar using femtosecond terawatt laser pulses. PMID:17099748

  4. Comparison of deaerator performance using experimental and numerical techniques

    NASA Astrophysics Data System (ADS)

    Majji, Sri Harsha

    Deaerator is a component of integrated drive generator (IDG), which is used to separate air from oil. Integrated drive generator is the main power generation unit used in aircrafts to generate electric-power and must be cooled to give maximum efficiency. Mob Jet Oil II is used in these IDGs as a lubricant and coolant. So, in order to get high-quality oil, a deaerator is used to remove trapped air from this Mob Jet Oil II using the centrifugal principle. The reason for entrapment of air may be due to operation of vacuum and high-pressure pumps. In this study, 75/90 IDG generic and A320 classic deaerator performance evaluation was done based on both experimental and numerical techniques. Experimental data was collected from deaerator test rig and numerical data was attained using CFD simulations (software used for CFD simulation is ANSYS CFX). Both experimental and numerical results were compared and also deaerator 75/90 generic and A320 classic was compared in this study. A parametric study on deaerators flow separation and inner geometry was also done in this study. This work also includes a comparison study of different multiphase models and different meshes applied on deaerator numerical test methodology.

  5. Cosmic radiation dose in aircraft--a neutron track etch detector.

    PubMed

    Vuković, B; Radolić, V; Miklavcić, I; Poje, M; Varga, M; Planinić, J

    2007-01-01

    Cosmic radiation bombards us at high altitude by ionizing particles. The radiation environment is a complex mixture of charged particles of solar and galactic origin, as well as of secondary particles produced in interaction of the galactic cosmic particles with the nuclei of atmosphere of the Earth. The radiation field at aircraft altitude consists of different types of particles, mainly photons, electrons, positrons and neutrons, with a large energy range. The non-neutron component of cosmic radiation dose aboard ATR 42 and A 320 aircrafts (flight level of 8 and 11 km, respectively) was measured with TLD-100 (LiF:Mg,Ti) detectors and the Mini 6100 semiconductor dosimeter. The estimated occupational effective dose for the aircraft crew (A 320) working 500 h per year was 1.64 mSv. Other experiments, or dose rate measurements with the neutron dosimeter, consisting of LR-115 track detector and boron foil BN-1 or 10B converter, were performed on five intercontinental flights. Comparison of the dose rates of the non-neutron component (low LET) and the neutron one (high LET) of the radiation field at the aircraft flight level showed that the neutron component carried about 50% of the total dose. The dose rate measurements on the flights from the Middle Europe to the South and Middle America, then to Korea and Japan, showed that the flights over or near the equator region carried less dose rate; this was in accordance with the known geomagnetic latitude effect.

  6. Use of infrared cameras for monitoring and research at Costa Rican volcanoes and thermal features

    NASA Astrophysics Data System (ADS)

    Ramirez, C. J.; Mora-Amador, R.; González, G.

    2012-12-01

    Since November 2010, the Costa Rican volcanoes and hot springs began monitored and research by 5 infrared cameras, 4 steady fixed FLIR A320 and 1 portable FLIR P660. All the A320's are located on different settings depending on the volcano or the constant use. At Turrialba volcano 2 of the cameras are set permanent at the crater rim, focused on the new vents formed on January 2010 and 2012, from there at ≈500m it is possible to monitor 24/7 the temperature of the gases from the new vents plus the direction and speed of the plumes, that data helps the improve of the use of equipment like Mini-DOAS, MultiGas or FTIR; at Poás volcano the camera is permanent fixed on a bunker structure located at ≈650m from the active hyperacid hot lagoon, from there it is possible to cover the complete crater with the use of a wide angle lens, that way is safely to track phreatic eruptions, observe convective cells from the lagoon, fumaroles activity, as well as temperature, direction and speed of the gas plume. Finally the last A320 is set for temporary set up, so far is being used on places like Arenal volcano because of the changing of the pattern of the lava flows and gas plume, also at Rincón de la Vieja crater rim because so far is difficult to set up a permanent camera, and finally to do over flights on active volcanoes. The FLIR P660, it has been used to carry out periodic measurements of specific thermal spots. At Turrialba and Poás volcanoes, it is possible to get closer views, measuring more precise inaccessible high temperature fumaroles like the new vents at Turrialba or the ones at Poás dome, places that can reach temperatures of more than 600°C, also is being a lot of support to track lagoon convection cells (61°C), fumaroles migration, lagoon phreatic eruptions (130°C), and better characterization of hot springs, small hot lagoons, and mud pools, with temperatures of ≈ 90C that allow the life of extreme organisms to survive. The use of the thermal cameras

  7. A Formal Methods Approach to the Analysis of Mode Confusion

    NASA Technical Reports Server (NTRS)

    Butler, Ricky W.; Miller, Steven P.; Potts, James N.; Carreno, Victor A.

    2004-01-01

    The goal of the new NASA Aviation Safety Program (AvSP) is to reduce the civil aviation fatal accident rate by 80% in ten years and 90% in twenty years. This program is being driven by the accident data with a focus on the most recent history. Pilot error is the most commonly cited cause for fatal accidents (up to 70%) and obviously must be given major consideration in this program. While the greatest source of pilot error is the loss of situation awareness , mode confusion is increasingly becoming a major contributor as well. The January 30, 1995 issue of Aviation Week lists 184 incidents and accidents involving mode awareness including the Bangalore A320 crash 2/14/90, the Strasbourg A320 crash 1/20/92, the Mulhouse-Habsheim A320 crash 6/26/88, and the Toulouse A330 crash 6/30/94. These incidents and accidents reveal that pilots sometimes become confused about what the cockpit automation is doing. Consequently, human factors research is an obvious investment area. However, even a cursory look at the accident data reveals that the mode confusion problem is much deeper than just training deficiencies and a lack of human-oriented design. This is readily acknowledged by human factors experts. It seems that further progress in human factors must come through a deeper scrutiny of the internals of the automation. It is in this arena that formal methods can contribute. Formal methods refers to the use of techniques from logic and discrete mathematics in the specification, design, and verification of computer systems, both hardware and software. The fundamental goal of formal methods is to capture requirements, designs and implementations in a mathematically based model that can be analyzed in a rigorous manner. Research in formal methods is aimed at automating this analysis as much as possible. By capturing the internal behavior of a flight deck in a rigorous and detailed formal model, the dark corners of a design can be analyzed. This paper will explore how formal

  8. Airbus windshear warning and guidance system

    NASA Technical Reports Server (NTRS)

    Bonafe, J. L.

    1990-01-01

    From its first designed airplane, Airbus considered mandatory a help in the crew's decision-making process to initiate an escape maneuver and help to successfully realize it. All the Airbus airplanes designed since 1975 included an alpha-floor function and a speed reference control law imbedded in the speed reference system (SRS) box for A 300 and FAC and FCC for A 310, A300/600 and the A 320. Alpha-Floor function takes into account the airplane energy situation considering angle of attack and observed longitudinal situation in order to apply immediately the full power without any pilot action. Speed reference managers control airspeed and/or ground speed in order to survive a maximum in shear situation. In order to comply with the new FAA regulation: Aerospatiale and Airbus developed more efficient systems. A comparison between 1975 and a newly developed system is given. It is explained how the new system improves the situation.

  9. Assessing the congruence of nursing models with organizational culture: a quality improvement perspective.

    PubMed

    Goodridge, D; Hack, B

    1996-01-01

    Model-based practice was identified by the Nursing Department at Riverview Health Centre, a 320-bed long-term care facility located in Winnipeg, Manitoba, as having the potential to enhance care quality significantly. To achieve real impact in the clinical setting, however, the model selected would need to reflect closely the culture and values of the department. It was decided to explore these phenomena using cross-method triangulation involving a cultural assessment survey (the Nursing Unit Cultural Assessment Tool) and focus groups. Patient comfort and empathy emerged consistently as core values for staff. Greater appreciation of the depth and complexity of the nursing department culture and values has provided invaluable direction vis-à-vis conceptual model selection.

  10. AIV procedure for a CHEOPS demonstration model

    NASA Astrophysics Data System (ADS)

    Bergomi, M.; Viotto, V.; Magrin, D.; Dima, M.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Munari, M.; Pagano, I.; Scandariato, G.; Scuderi, S.; Beck, T.; Buxton, R.; Piazza, D.; Benz, W.; Broeg, C.; Cessa, V.; Piotto, G.

    2014-08-01

    The CHaracterizing ExOPlanet Satellite (CHEOPS) is an ESA Small Mission whose launch is planned for the end of 2017. It is a Ritchey-Chretien telescope with a 320 mm aperture providing a FoV of 0.32 degrees, which will target nearby bright stars already known to host planets, and measure, through ultrahigh precision photometry, the radius of exo-planets, allowing to determine their composition. This paper will present the details of the AIV plan for a demonstration model of the CHEOPS Telescope with equivalent structure but different CTEs. Alignment procedures, needed GSEs and devised verification tests will be described and a path for the AIV of the flight model, which will take place at industries premises, will be sketched.

  11. Highly efficient mode converter for coupling light into wide slot photonic crystal waveguide.

    PubMed

    Zhang, Xingyu; Subbaraman, Harish; Hosseini, Amir; Chen, Ray T

    2014-08-25

    We design, fabricate and experimentally demonstrate a highly efficient adiabatic mode converter for coupling light into a silicon slot waveguide with a slot width as large as 320 nm. This strip-to-slot mode converter is optimized to provide a measured insertion loss as low as 0.08 dB. Our mode converter provides 0.1 dB lower loss compared to a conventional V-shape mode converter. This mode converter is used to couple light into and out of a 320 nm slot photonic crystal waveguide, and it is experimentally shown to improve the coupling efficiency up to 3.5 dB compared to the V-shape mode converter, over the slow-light wavelength region.

  12. Nanosecond pulsed power generator for a voltage amplitude up to 300 kV and a repetition rate up to 16 Hz for fine disintegration of quartz

    NASA Astrophysics Data System (ADS)

    Krastelev, E. G.; Sedin, A. A.; Tugushev, V. I.

    2015-12-01

    A generator of high-power high-voltage nanosecond pulses is intended for electrical discharge disintegration of mineral quartz and other nonconducting minerals. It includes a 320 kV Marx pulsed voltage generator, a high-voltage glycerin-insulated coaxial peaking capacitor, and an output gas spark switch followed by a load, an electric discharge disintegration chamber. The main parameters of the generator are as follows: a voltage pulse amplitude of up to 300 kV, an output impedance of ≈10 Ω, a discharge current amplitude of up to 25 kA for a half-period of 80-90 ns, and a pulse repetition rate of up to 16 Hz.

  13. Ecological assessment of the environmental impacts of the kerosene burning in jet turbines and its improvement assessment.

    PubMed

    Geldermann, J; Gabriel, R; Rentz, O

    1999-01-01

    The burning of kerosene in jet turbines is investigated for two reference flights with a Boeing 747-400 and an Airbus A320-200, representing the typical Lufthansa planes for long and middle distance. The ecological evaluation is performed by Life Cycle Assessment (LCA). Formation of condensation trails, which is a specific environmental impact caused by air traffic, has to be considered in addition to established LCA impact categories. Based on the ecological assessment, an improvement assessment is performed. Environmental performance of diesel fuel during the combustion in car engines is analysed based on available publications. The relevant parameters for the environmental impact of the combustion of diesel (aromatics content, reduction of sulphur content, the reduction of the density and raising of the cetane number) are discussed with regard to improvements of the exhaust qualities of kerosene. A reduction of the aromatics content promises to improve the emission of soot which should be further investigated. PMID:19009417

  14. A new contact neodymium: YAG laser for cyclophotocoagulation

    SciTech Connect

    Iwach, A.G.; Drake, M.V.; Hoskins, H.D. Jr.; Schuster, B.L.; Vassiliadis, A.; Crawford, J.B.; Hennings, D.R. )

    1991-06-01

    A newly developed compact (40 kg), self-contained contact Neodymium:YAG laser produces high-peak, high-energy (800 mJ/pulse), short (1.0 millisecond) pulses with 1 to 3 pulses/exposure. Energy is delivered via a 320-microns cleaved quartz fiber optic probe. Cyclophotocoagulation was performed in five eyes of three medium-sized Dutch-pigmented rabbits. The eyes received exposures of 1 to 3 pulses/exposure. Energy delivered ranged from 100 to 800 mJ/pulse. Histopathology revealed ciliary body disruption and hemorrhage with no damage to overlying sclera. When used for transscleral cyclodiathermy in the rabbit, the laser created significant ciliary body disruption with minimal scleral injury.

  15. Thermal-Infrared Pedestrian ROI Extraction through Thermal and Motion Information Fusion

    PubMed Central

    Fernández-Caballero, Antonio; López, María T.; Serrano-Cuerda, Juan

    2014-01-01

    This paper investigates the robustness of a new thermal-infrared pedestrian detection system under different outdoor environmental conditions. In first place the algorithm for pedestrian ROI extraction in thermal-infrared video based on both thermal and motion information is introduced. Then, the evaluation of the proposal is detailed after describing the complete thermal and motion information fusion. In this sense, the environment chosen for evaluation is described, and the twelve test sequences are specified. For each of the sequences captured from a forward-looking infrared FLIR A-320 camera, the paper explains the weather and light conditions under which it was captured. The results allow us to draw firm conclusions about the conditions under which it can be affirmed that it is efficient to use our thermal-infrared proposal to robustly extract human ROIs. PMID:24727500

  16. Research of the effects of TEC on UFPA noise performance

    NASA Astrophysics Data System (ADS)

    Jiang, Qiao; Xie, Guangzhong; Xiong, Lixia; Liao, Baobin; Que, Longcheng; Zhou, Yun; Lv, Jian

    2012-10-01

    Infrared detection technology plays a more and more important role in military and business. Uncooled infrared focal plane array (UFPA) is a kind of thermal detector, which detects the infrared radiation of target through the microbolometer's photoelectric conversion. Based on the thermal model of UFPA, stable and accordant substrate temperature of microbolometer array is extreme important to improve the UFPA's noise performance. After researching the effects of substrate temperature act on UFPA's noise performance and responsivity, a low noise data capture system with TEC controller for UFPA is designed. And a 320x240 microbolometer array's noise is tested with this system. With the TEC controller, the substrate temperature fluctuates at a margin of only 0.006 ºC. The test result shows that a 12.1% decrease in RMS noise, a 14.5% decrease in FPN noise and improvement of responsivity non-uniformity over time have been obtained after using TEC controller in UFPA.

  17. Cavity-enhanced Raman microscopy of individual carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Hümmer, Thomas; Noe, Jonathan; Hofmann, Matthias S.; Hänsch, Theodor W.; Högele, Alexander; Hunger, David

    2016-07-01

    Raman spectroscopy reveals chemically specific information and provides label-free insight into the molecular world. However, the signals are intrinsically weak and call for enhancement techniques. Here, we demonstrate Purcell enhancement of Raman scattering in a tunable high-finesse microcavity, and utilize it for molecular diagnostics by combined Raman and absorption imaging. Studying individual single-wall carbon nanotubes, we identify crucial structural parameters such as nanotube radius, electronic structure and extinction cross-section. We observe a 320-times enhanced Raman scattering spectral density and an effective Purcell factor of 6.2, together with a collection efficiency of 60%. Potential for significantly higher enhancement, quantitative signals, inherent spectral filtering and absence of intrinsic background in cavity-vacuum stimulated Raman scattering render the technique a promising tool for molecular imaging. Furthermore, cavity-enhanced Raman transitions involving localized excitons could potentially be used for gaining quantum control over nanomechanical motion and open a route for molecular cavity optomechanics.

  18. 2D label-free imaging of resonant grating biochips in ultraviolet.

    PubMed

    Bougot-Robin, K; Reverchon, J-L; Fromant, M; Mugherli, L; Plateau, P; Benisty, H

    2010-05-24

    2D images of label-free biochips exploiting resonant waveguide grating (RWG) are presented. They indicate sensitivities on the order of 1 pg/mm2 for proteins in air, and hence 10 pg/mm2 in water can be safely expected. A 320x256 pixels Aluminum-Gallium-Nitride-based sensor array is used, with an intrinsic narrow spectral window centered at 280 nm. The additional role of characteristic biological layer absorption at this wavelength is calculated, and regimes revealing its impact are discussed. Experimentally, the resonance of a chip coated with protein is revealed and the sensitivity evaluated through angular spectroscopy and imaging. In addition to a sensitivity similar to surface plasmon resonance (SPR), the RWGs resonance can be flexibly tailored to gain spatial, biochemical, or spectral sensitivity.

  19. Nanosecond pulsed power generator for a voltage amplitude up to 300 kV and a repetition rate up to 16 Hz for fine disintegration of quartz

    SciTech Connect

    Krastelev, E. G. Sedin, A. A.; Tugushev, V. I.

    2015-12-15

    A generator of high-power high-voltage nanosecond pulses is intended for electrical discharge disintegration of mineral quartz and other nonconducting minerals. It includes a 320 kV Marx pulsed voltage generator, a high-voltage glycerin-insulated coaxial peaking capacitor, and an output gas spark switch followed by a load, an electric discharge disintegration chamber. The main parameters of the generator are as follows: a voltage pulse amplitude of up to 300 kV, an output impedance of ≈10 Ω, a discharge current amplitude of up to 25 kA for a half-period of 80–90 ns, and a pulse repetition rate of up to 16 Hz.

  20. UV-A induces persistent genomic instability in human keratinocytes through an oxidative stress mechanism.

    PubMed

    Phillipson, Ross P; Tobi, Simon E; Morris, James A; McMillan, Trevor J

    2002-03-01

    Ultraviolet-A (UV-A, 320 to 400 nm) radiation comprises 95% of the solar ultraviolet radiation (UVR) reaching the earth's surface. It has been associated experimentally and epidemiologically with malignant melanoma. In this study we investigated whether UV-A radiation can induce a persistent, heritable hypermutability in mammalian cells similar to that observed following ionising radiation (IR). Using the immortalized human skin keratinocyte cell line HaCaT we found that UV-A radiation does lead to a continuing reduction in plating efficiency, an increased "spontaneous" mutant fraction, and an increase in micronucleus formation up to 21 d after initial exposure. Reversal of these effects using catalase may indicate a role for hydrogen peroxide in this phenomenon. These results add to the significance of UV-A radiation as a risk factor in skin carcinogenesis.

  1. RFID Transponders' Radio Frequency Emissions in Aircraft Communication and Navigation Radio Bands

    NASA Technical Reports Server (NTRS)

    Nguyen, Truong X.; Ely, Jay J.; Williams, Reuben A.; Koppen, Sandra V.; Salud, Maria Theresa P.

    2006-01-01

    Radiated emissions in aircraft communication and navigation bands are measured from several active radio frequency identification (RFID) tags. The individual tags are different in design and operations. They may also operate in different frequency bands. The process for measuring the emissions is discussed, and includes tag interrogation, reverberation chamber testing, and instrument settings selection. The measurement results are described and compared against aircraft emission limits. In addition, interference path loss for the cargo bays of passenger aircraft is measured. Cargo bay path loss is more appropriate for RFID tags than passenger cabin path loss. The path loss data are reported for several aircraft radio systems on a Boeing 747 and an Airbus A320.

  2. Nano-fabricated pixelated micropolarizer array for visible imaging polarimetry

    SciTech Connect

    Zhang, Zhigang; Cheng, Teng; Qiu, Kang; Zhang, Qingchuan E-mail: wgchu@nanoctr.cn; Wu, Xiaoping; Dong, Fengliang; Chu, Weiguo E-mail: wgchu@nanoctr.cn

    2014-10-15

    Pixelated micropolarizer array (PMA) is a novel concept for real-time visible imaging polarimetry. A 320 × 240 aluminum PMA fabricated by electron beam lithography is described in this paper. The period, duty ratio, and depth of the grating are 140 nm, 0.5, and 100 nm, respectively. The units are standard square structures and the metal nanowires of the grating are collimating and uniformly thick. The extinction ratio of 75 and the maximum polarization transmittance of 78.8% demonstrate that the PMA is suitable for polarization imaging. When the PMA is applied to real-time polarization imaging, the degree of linear polarization image and the angle of linear polarization image are calculated from a single frame image. The polarized target object is highlighted from the unpolarized background, and the surface contour of the target object can be reflected by the polarization angle.

  3. Results of test IA137 in the NASA/ARC 14 foot transonic wind tunnel of the 0.07 scale external tank forebody (model 68-T) to determine auxiliary aerodynamic data system feasibility

    NASA Technical Reports Server (NTRS)

    Thornton, D. E.

    1976-01-01

    Tests were conducted in a 14 foot transonic wind tunnel to examine the feasibility of the auxiliary aerodynamic data system (AADS) for determining angles of attack and sideslip during boost flight. The model used was a 0.07 scale replica of the external tank forebody consisting of the nose portion and a 60 inch (full scale) cylindrical section of the ogive cylinder tangency point. The model terminated in a blunt base with a 320.0 inch diameter at external tank (ET) station 1120.37. Pressure data were obtained from five pressure orifices (one total and four statics) on the nose probe, and sixteen surface static pressure orifices along the ET forebody.

  4. Progress of the Swedish-Australian research collaboration on uncooled smart IR sensors

    NASA Astrophysics Data System (ADS)

    Liddiard, Kevin C.; Ringh, Ulf; Jansson, Christer; Reinhold, Olaf

    1998-10-01

    Progress is reported on the development of uncooled microbolometer IR focal plane detector arrays (IRFPDA) under a research collaboration between the Swedish Defence Research Establishment (FOA), and the Defence Science and Technology Organization (DSTO), Australia. The paper describes current focal plane detector arrays designed by Electro-optic Sensor Design (EOSD) for readout circuits developed by FOA. The readouts are fabricated in 0.8 micrometer CMOS, and have a novel signal conditioning and 16 bit parallel ADC design. The arrays are post-processed at DSTO on wafers supplied by FOA. During the past year array processing has been carried out at a new microengineering facility at DSTO, Salisbury, South Australia. A number of small format 16 X 16 arrays have been delivered to FOA for evaluation, and imaging has been demonstrated with these arrays. A 320 X 240 readout with 320 parallel 16 bit ADCs has been developed and IRFPDAs for this readout have been fabricated and are currently being evaluated.

  5. Thermal-infrared pedestrian ROI extraction through thermal and motion information fusion.

    PubMed

    Fernández-Caballero, Antonio; López, María T; Serrano-Cuerda, Juan

    2014-04-10

    This paper investigates the robustness of a new thermal-infrared pedestrian detection system under different outdoor environmental conditions. In first place the algorithm for pedestrian ROI extraction in thermal-infrared video based on both thermal and motion information is introduced. Then, the evaluation of the proposal is detailed after describing the complete thermal and motion information fusion. In this sense, the environment chosen for evaluation is described, and the twelve test sequences are specified. For each of the sequences captured from a forward-looking infrared FLIR A-320 camera, the paper explains the weather and light conditions under which it was captured. The results allow us to draw firm conclusions about the conditions under which it can be affirmed that it is efficient to use our thermal-infrared proposal to robustly extract human ROIs.

  6. Fluorescence lifetime biosensing with DNA microarrays and a CMOS-SPAD imager

    PubMed Central

    Giraud, Gerard; Schulze, Holger; Li, Day-Uei; Bachmann, Till T.; Crain, Jason; Tyndall, David; Richardson, Justin; Walker, Richard; Stoppa, David; Charbon, Edoardo; Henderson, Robert; Arlt, Jochen

    2010-01-01

    Fluorescence lifetime of dye molecules is a sensitive reporter on local microenvironment which is generally independent of fluorophores concentration and can be used as a means of discrimination between molecules with spectrally overlapping emission. It is therefore a potentially powerful multiplexed detection modality in biosensing but requires extremely low light level operation typical of biological analyte concentrations, long data acquisition periods and on-chip processing capability to realize these advantages. We report here fluorescence lifetime data obtained using a CMOS-SPAD imager in conjunction with DNA microarrays and TIRF excitation geometry. This enables acquisition of single photon arrival time histograms for a 320 pixel FLIM map within less than 26 seconds exposure time. From this, we resolve distinct lifetime signatures corresponding to dye-labelled HCV and quantum-dot-labelled HCMV nucleic acid targets at concentrations as low as 10 nM. PMID:21258550

  7. Design of transmission-type phase holograms for a compact radar-cross-section measurement range at 650 GHz.

    PubMed

    Noponen, Eero; Tamminen, Aleksi; Vaaja, Matti

    2007-07-10

    A design formalism is presented for transmission-type phase holograms for use in a submillimeter-wave compact radar-cross-section (RCS) measurement range. The design method is based on rigorous electromagnetic grating theory combined with conventional hologram synthesis. Hologram structures consisting of a curved groove pattern on a 320 mmx280 mm Teflon plate are designed to transform an incoming spherical wave at 650 GHz into an output wave generating a 100 mm diameter planar field region (quiet zone) at a distance of 1 m. The reconstructed quiet-zone field is evaluated by a numerical simulation method. The uniformity of the quiet-zone field is further improved by reoptimizing the goal field. Measurement results are given for a test hologram fabricated on Teflon.

  8. An Analytical Assessment of NASA's N+1 Subsonic Fixed Wing Project Noise Goal

    NASA Technical Reports Server (NTRS)

    Berton, Jeffrey J.; Envia, Edmane; Burley, Casey L.

    2009-01-01

    The Subsonic Fixed Wing Project of NASA's Fundamental Aeronautics Program has adopted a noise reduction goal for new, subsonic, single-aisle, civil aircraft expected to replace current 737 and A320 airplanes. These so-called 'N+1' aircraft - designated in NASA vernacular as such since they will follow the current, in-service, 'N' airplanes - are hoped to achieve certification noise goal levels of 32 cumulative EPNdB under current Stage 4 noise regulations. A notional, N+1, single-aisle, twinjet transport with ultrahigh bypass ratio turbofan engines is analyzed in this study using NASA software and methods. Several advanced noise-reduction technologies are analytically applied to the propulsion system and airframe. Certification noise levels are predicted and compared with the NASA goal.

  9. An Analytical Assessment of NASA's N(+)1 Subsonic Fixed Wing Project Noise Goal

    NASA Technical Reports Server (NTRS)

    Berton, Jeffrey J.; Envia, Edmane; Burley, Casey L.

    2010-01-01

    The Subsonic Fixed Wing Project of NASA s Fundamental Aeronautics Program has adopted a noise reduction goal for new, subsonic, single-aisle, civil aircraft expected to replace current 737 and A320 airplanes. These so-called "N+1" aircraft--designated in NASA vernacular as such since they will follow the current, in-service, "N" airplanes--are hoped to achieve certification noise goal levels of 32 cumulative EPNdB under current Stage 4 noise regulations. A notional, N+1, single-aisle, twinjet transport with ultrahigh bypass ratio turbofan engines is analyzed in this study using NASA software and methods. Several advanced noise-reduction technologies are empirically applied to the propulsion system and airframe. Certification noise levels are predicted and compared with the NASA goal.

  10. Melanoma induction by ultraviolet A but not ultraviolet B radiation requires melanin pigment.

    PubMed

    Noonan, Frances P; Zaidi, M Raza; Wolnicka-Glubisz, Agnieszka; Anver, Miriam R; Bahn, Jesse; Wielgus, Albert; Cadet, Jean; Douki, Thierry; Mouret, Stephane; Tucker, Margaret A; Popratiloff, Anastas; Merlino, Glenn; De Fabo, Edward C

    2012-06-06

    Malignant melanoma of the skin (CMM) is associated with ultraviolet radiation exposure, but the mechanisms and even the wavelengths responsible are unclear. Here we use a mammalian model to investigate melanoma formed in response to precise spectrally defined ultraviolet wavelengths and biologically relevant doses. We show that melanoma induction by ultraviolet A (320-400 nm) requires the presence of melanin pigment and is associated with oxidative DNA damage within melanocytes. In contrast, ultraviolet B radiation (280-320 nm) initiates melanoma in a pigment-independent manner associated with direct ultraviolet B DNA damage. Thus, we identified two ultraviolet wavelength-dependent pathways for the induction of CMM and describe an unexpected and significant role for melanin within the melanocyte in melanomagenesis.

  11. Structure of human dual-specificity phosphatase 7, a potential cancer drug target

    PubMed Central

    Lountos, George T.; Austin, Brian P.; Tropea, Joseph E.; Waugh, David S.

    2015-01-01

    Human dual-specificity phosphatase 7 (DUSP7/Pyst2) is a 320-residue protein that belongs to the mitogen-activated protein kinase phosphatase (MKP) subfamily of dual-specificity phosphatases. Although its precise biological function is still not fully understood, previous reports have demonstrated that DUSP7 is overexpressed in myeloid leukemia and other malignancies. Therefore, there is interest in developing DUSP7 inhibitors as potential therapeutic agents, especially for cancer. Here, the purification, crystallization and structure determination of the catalytic domain of DUSP7 (Ser141–Ser289/C232S) at 1.67 Å resolution are reported. The structure described here provides a starting point for structure-assisted inhibitor-design efforts and adds to the growing knowledge base of three-dimensional structures of the dual-specificity phosphatase family. PMID:26057789

  12. Noninvasive method of DNA isolation from fecal epithelial tissue of dairy animals.

    PubMed

    Chandra De, Bidhan; Patra, Mahesh Chandra; Kumar, Sushil; Brahma, Biswajit; Goutam, Devika; Jaiswal, Latika; Sharma, Ashutosh; De, Sachinandan

    2015-01-01

    A novel noninvasive genomic DNA isolation protocol from fecal tissue, by the proteinase K digestion and guanidine hydrochloride extraction method, was assessed for the genotyping of cattle and buffalo. The epithelial tissues present on the surface of the feces were used as source for isolation of genomic DNA. The DNA isolated from fecal tissue was found to be similar as those obtained from other body tissues such as skin, brain, liver, kidney, and muscle. The quality of DNA was checked by agarose gel electrophoresis and polymerase chain reaction (PCR). We successfully amplified a 320 bp MHC class II DRB gene and a 125 bp mt-DNA D-loop region from isolated genomic DNA of cattle. Thus, the DNA isolated using this method was suitable for common molecular biology methods, such as restriction enzyme digestion and genotyping of dairy animals through PCR.

  13. Single photon counting pixel detectors for synchrotron radiation experiments

    NASA Astrophysics Data System (ADS)

    Toyokawa, H.; Broennimann, Ch.; Eikenberry, E. F.; Henrich, B.; Kawase, M.; Kobas, M.; Kraft, P.; Sato, M.; Schmitt, B.; Suzuki, M.; Tanida, H.; Uruga, T.

    2010-11-01

    At the Paul Scherrer Institute PSI an X-ray single photon counting pixel detector (PILATUS) based on the hybrid-pixel detector technology was developed in collaboration with SPring-8. The detection element is a 320 or 450 μm thick silicon sensor forming pixelated pn-diodes with a pitch of 172 μm×172 μm. An array of 2×8 custom CMOS readout chips are indium bump-bonded to the sensor, which leads to 33.5 mm×83.8 mm detective area. Each pixel contains a charge-sensitive amplifier, a single level discriminator and a 20 bit counter. This design realizes a high dynamic range, short readout time of less than 3 ms, a high framing rate of over 200 images per second and an excellent point-spread function. The maximum counting rate achieves more than 2×10 6 X-rays/s/pixel.

  14. 2D SWIR image sensor with extended wavelength cutoff of 2.5 μm on InP/InGaAs epitaxial wafers with graded buffer layers

    NASA Astrophysics Data System (ADS)

    Mushini, Prabhu; Huang, Wei; Morales, Manuel; Brubaker, Robert; Nguyen, Thuc-Uyen; Dobies, Matt; Zhang, Wei; Gustus, William; Mathews, Gary; Endicter, Scott; Paik, Namwoong

    2016-05-01

    Two-dimensional photo detector arrays with a cutoff wavelength of 2.5 μm were fabricated on InP/InGaAs epitaxial wafers with graded buffer layers in a 320x256 geometry on a 12.5μm pitch. Novel growth and fabrication techniques were employed to fabricate these arrays and optimize the performance. The dark current of the detector was investigated for a wide range of temperatures. The fabricated detector array was mated with a ROIC and packaged with a multi-stage TEC and investigated further at the FPA level. The effect of the graded buffer layers on the sensor performance was investigated and the results were compared to other methods used to develop and fabricate 2D image sensors on extended wavelength materials.

  15. Characterisation of strip silicon detectors for the ATLAS Phase-II Upgrade with a micro-focused X-ray beam

    NASA Astrophysics Data System (ADS)

    Poley, L.; Blue, A.; Bates, R.; Bloch, I.; Díez, S.; Fernandez-Tejero, J.; Fleta, C.; Gallop, B.; Greenall, A.; Gregor, I.-M.; Hara, K.; Ikegami, Y.; Lacasta, C.; Lohwasser, K.; Maneuski, D.; Nagorski, S.; Pape, I.; Phillips, P. W.; Sperlich, D.; Sawhney, K.; Soldevila, U.; Ullan, M.; Unno, Y.; Warren, M.

    2016-07-01

    The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6·1034 cm‑2s‑1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb‑1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1·1016 1 MeV neq/cm2. In order to cope with the consequent increased readout rates, a complete re-design of the current ATLAS Inner Detector (ID) is being developed as the Inner Tracker (ITk). Two proposed detectors for the ATLAS strip tracker region of the ITk were characterized at the Diamond Light Source with a 3 μm FWHM 15 keV micro focused X-ray beam. The devices under test were a 320 μm thick silicon stereo (Barrel) ATLAS12 strip mini sensor wire bonded to a 130 nm CMOS binary readout chip (ABC130) and a 320 μm thick full size radial (end-cap) strip sensor - utilizing bi-metal readout layers - wire bonded to 250 nm CMOS binary readout chips (ABCN-25). A resolution better than the inter strip pitch of the 74.5 μm strips was achieved for both detectors. The effect of the p-stop diffusion layers between strips was investigated in detail for the wire bond pad regions. Inter strip charge collection measurements indicate that the effective width of the strip on the silicon sensors is determined by p-stop regions between the strips rather than the strip pitch.

  16. Some cosmic radiation dose measurements aboard flights connecting Zagreb Airport.

    PubMed

    Vuković, B; Radolić, V; Lisjak, I; Vekić, B; Poje, M; Planinić, J

    2008-02-01

    When primary particles from space, mainly protons, enter the atmosphere, they produce interactions with air nuclei, and cosmic-ray showers are induced. The radiation field at aircraft altitude is complex, with different types of particles, mainly photons, electrons, positrons and neutrons, with a large energy range. The non-neutron component of cosmic radiation dose aboard A320 and ATR40 aircraft was measured with TLD-100 (LiF:Mg,Ti) detectors and the Mini 6100 semiconductor dosimeter; the neutron dose was measured with the neutron dosimeter consisted of LR-115 track detector and boron foil BN-1 or 10B converter. The estimated occupational effective dose for the aircraft crew (A320) working 500 h per year was 1.64 mSv. Another experiment was performed at the flights Zagreb-Paris-Buenos Aires and reversely, when one measured non-neutron cosmic radiation dose; for 26.7 h of flight, the MINI 6100 dosimeter gave an average dose rate of 2.3 microSv/h and the TLD dosimeter registered the dose equivalent of 75 microSv or the average dose rate of 2.7 microSv/h; the neutron dosimeter gave the dose rate of 2.4 microSv/h. In the same month, February 2005, a traveling to Japan (24-h-flight: Zagreb-Frankfurt-Tokyo and reversely) and the TLD-100 measurement showed the average dose rate of 2.4microSv/h; the neutron dosimeter gave the dose rate of 2.5 microSv/h. Comparing dose rates of the non-neutron component (low LET) and the neutron one (high LET) of the radiation field at the aircraft flight level, we could conclude that the neutron component carried about 50% of the total dose, that was near other known data.

  17. Design conceptuel d'un avion blended wing body de 200 passagers

    NASA Astrophysics Data System (ADS)

    Ammar, Sami

    The Blended Wing Body is built based on the flying wing concept and performance improvements compared to conventional aircraft. Contrariwise, most studies have focused on large aircraft and it is not sure whether the gains are the same for smaller aircraft. The main of objective is to perform the conceptual design of a BWB of 200 passengers and compare the performance obtained with a conventional aircraft equivalent in terms of payload and range. The design of the Blended Wing Body was carried out under the CEASIOM environment. This platform design suitable for conventional aircraft design has been modified and additional tools have been integrated in order to achieve the aerodynamic analysis, performance and stability of the aircraft fuselage built. A plane model is obtained in the geometric module AcBuilder CEASIOM from the design variables of a wing. Estimates of mass are made from semi- empirical formulas adapted to the geometry of the BWB and calculations centering and inertia are possible through BWB model developed in CATIA. Low fidelity methods, such as TORNADO and semi- empirical formulas are used to analyze the aerodynamic performance and stability of the aircraft. The aerodynamic results are validated using a high-fidelity analysis using FLUENT CFD software. An optimization process is implemented in order to obtain improved while maintaining a feasible design performance. It is an optimization of the plan form of the aircraft fuselage integrated with a number of passengers and equivalent to that of a A320.Les performance wing aircraft merged optimized maximum range are compared to A320 also optimized. Significant gains were observed. An analysis of the dynamics of longitudinal and lateral flight is carried out on the aircraft optimized BWB finesse and mass. This study identified the stable and unstable modes of the aircraft. Thus, this analysis has highlighted the stability problems associated with the oscillation of incidence and the Dutch roll for the

  18. Characterisation of strip silicon detectors for the ATLAS Phase-II Upgrade with a micro-focused X-ray beam

    NASA Astrophysics Data System (ADS)

    Poley, L.; Blue, A.; Bates, R.; Bloch, I.; Díez, S.; Fernandez-Tejero, J.; Fleta, C.; Gallop, B.; Greenall, A.; Gregor, I.-M.; Hara, K.; Ikegami, Y.; Lacasta, C.; Lohwasser, K.; Maneuski, D.; Nagorski, S.; Pape, I.; Phillips, P. W.; Sperlich, D.; Sawhney, K.; Soldevila, U.; Ullan, M.; Unno, Y.; Warren, M.

    2016-07-01

    The planned HL-LHC (High Luminosity LHC) in 2025 is being designed to maximise the physics potential through a sizable increase in the luminosity up to 6·1034 cm-2s-1. A consequence of this increased luminosity is the expected radiation damage at 3000 fb-1 after ten years of operation, requiring the tracking detectors to withstand fluences to over 1·1016 1 MeV neq/cm2. In order to cope with the consequent increased readout rates, a complete re-design of the current ATLAS Inner Detector (ID) is being developed as the Inner Tracker (ITk). Two proposed detectors for the ATLAS strip tracker region of the ITk were characterized at the Diamond Light Source with a 3 μm FWHM 15 keV micro focused X-ray beam. The devices under test were a 320 μm thick silicon stereo (Barrel) ATLAS12 strip mini sensor wire bonded to a 130 nm CMOS binary readout chip (ABC130) and a 320 μm thick full size radial (end-cap) strip sensor - utilizing bi-metal readout layers - wire bonded to 250 nm CMOS binary readout chips (ABCN-25). A resolution better than the inter strip pitch of the 74.5 μm strips was achieved for both detectors. The effect of the p-stop diffusion layers between strips was investigated in detail for the wire bond pad regions. Inter strip charge collection measurements indicate that the effective width of the strip on the silicon sensors is determined by p-stop regions between the strips rather than the strip pitch.

  19. Some cosmic radiation dose measurements aboard flights connecting Zagreb Airport.

    PubMed

    Vuković, B; Radolić, V; Lisjak, I; Vekić, B; Poje, M; Planinić, J

    2008-02-01

    When primary particles from space, mainly protons, enter the atmosphere, they produce interactions with air nuclei, and cosmic-ray showers are induced. The radiation field at aircraft altitude is complex, with different types of particles, mainly photons, electrons, positrons and neutrons, with a large energy range. The non-neutron component of cosmic radiation dose aboard A320 and ATR40 aircraft was measured with TLD-100 (LiF:Mg,Ti) detectors and the Mini 6100 semiconductor dosimeter; the neutron dose was measured with the neutron dosimeter consisted of LR-115 track detector and boron foil BN-1 or 10B converter. The estimated occupational effective dose for the aircraft crew (A320) working 500 h per year was 1.64 mSv. Another experiment was performed at the flights Zagreb-Paris-Buenos Aires and reversely, when one measured non-neutron cosmic radiation dose; for 26.7 h of flight, the MINI 6100 dosimeter gave an average dose rate of 2.3 microSv/h and the TLD dosimeter registered the dose equivalent of 75 microSv or the average dose rate of 2.7 microSv/h; the neutron dosimeter gave the dose rate of 2.4 microSv/h. In the same month, February 2005, a traveling to Japan (24-h-flight: Zagreb-Frankfurt-Tokyo and reversely) and the TLD-100 measurement showed the average dose rate of 2.4microSv/h; the neutron dosimeter gave the dose rate of 2.5 microSv/h. Comparing dose rates of the non-neutron component (low LET) and the neutron one (high LET) of the radiation field at the aircraft flight level, we could conclude that the neutron component carried about 50% of the total dose, that was near other known data. PMID:17935999

  20. Deep ultraviolet (254 nm) focal plane array

    NASA Astrophysics Data System (ADS)

    Cicek, Erdem; Vashaei, Zahra; McClintock, Ryan; Razeghi, Manijeh

    2011-10-01

    We report the synthesis, fabrication and testing of a 320 × 256 focal plane array (FPA) of back-illuminated, solarblind, p-i-n, AlxGa1-xN-based detectors, fully realized within our research laboratory. We implemented a novel pulsed atomic layer deposition technique for the metalorganic chemical vapor deposition (MOCVD) growth of crackfree, thick, and high Al composition AlxGa1-xN layers. Following the growth, the wafer was processed into a 320 × 256 array of 25 μm × 25 μm pixels on a 30 μm pixel-pitch and surrounding mini-arrays. A diagnostic mini-array was hybridized to a silicon fan-out chip to allow the study of electrical and optical characteristics of discrete pixels of the FPA. At a reverse bias of 1 V, an average photodetector exhibited a low dark current density of 1.12×10-8 A/cm2. Solar-blind operation is observed throughout the array with peak detection occurring at wavelengths of 256 nm and lower and falling off three orders of magnitude by 285 nm. After indium bump deposition and dicing, the FPA is hybridized to a matching ISC 9809 readout integrated circuit (ROIC). By developing a novel masking technology, we significantly reduced the visible response of the ROIC and thus the need for external filtering to achieve solar- and visible-blind operation is eliminated. This allowed the FPA to achieve high external quantum efficiency (EQE): at 254 nm, average pixels showed unbiased peak responsivity of 75 mA/W, which corresponds to an EQE of ~37%. Finally, the uniformity of the FPA and imaging properties are investigated.

  1. Three-dimensional generalized xy models: A Monte Carlo study

    NASA Astrophysics Data System (ADS)

    Chamati, H.; Romano, S.; Mól, L. A. S.; Pereira, A. R.

    2005-10-01

    The lattice spin models considered in the present paper consist of three-component unit vectors, associated with a D-dimensional lattice (say Bbb Zd), parameterized by usual spherical angles (θk,phik), and interacting via a ferromagnetic potential restricted to nearest neighbours, of the form Wjk = - epsilon(sin θj sin θk)p cos (phij - phik), p in Bbb N, p >= 1; here epsilon is a positive quantity setting energy and temperature scales. The models were recently introduced, and rigorous comparison inequalities holding for them were investigated, and used to prove the existence of an ordering transition when D = 3 (Romano S. and Zagrebnov V. A., Phys. Lett. A, 301 (2002) 402), investigated by other approximate techniques as well (Mól L. A. S., Pereira A. R. and Moura-Melo W. A., Phys. Lett. A, 319 (2003) 114). We report here an extensive Monte Carlo study of the critical behaviour for D = 3 and p <= 4; our results are consistent with the same universality class as the xy model.

  2. LCX: Proposal for a low-cost commercial transport

    NASA Technical Reports Server (NTRS)

    Hartman, Troy; Hayatdavoudi, Maziar; Hettinga, Joel; Hooper, Matt; Nguyen, Phong

    1994-01-01

    The LCX has been developed in response to a request for proposal for an aircraft with 153 passenger capacity and a range of 3000 nautical miles. The goals of the LCX are to provide an aircraft which will achieve the stated mission requirements at the lowest cost possible, both for the manufacturer and the operator. Low cost in this request is defined as short and long term profitability. To achieve this objective, modern technologies attributing to low-cost operation without greatly increasing the cost of manufacturing were employed. These technologies include hybrid laminar flow control and the use of developing new manufacturing processes and philosophies. The LCX will provide a competitive alternative to the use of the Airbus A319/320/321 and the Boeing 737 series of aircraft. The LCX has a maximum weight of 150,000 lb. carried by a wing of 1140 ft(exp 2) and an aspect ratio of 10. The selling price of the LCX is 31 million in 1994 US dollars.

  3. VizieR Online Data Catalog: V436 Persei UBV photometry (Janik+, 2003)

    NASA Astrophysics Data System (ADS)

    Janik, J.; Harmanec, P.; Lehmann, H.; Yang, S.; Bozic, H.; Ak, H.; Hadrava, P.; Eenens, P.; Ruzdjak, D.; Sudar, D.; Hubeny, I.; Linnell, A. P.

    2003-09-01

    An analysis of new spectroscopic and photoelectric UBV observations, satisfactorily covering the whole orbital period of V436 Per, together with existing data allowed us to improve the knowledge of the basic physical characteristics of the binary and its components. In several aspects, our new results differ from the findings of Paper I (Harmanec et al., 1997, Cat. A/319/867>) of this series: In particular, we found that it is the star eclipsed in the secondary minimum which is slightly more massive and larger than the optical primary. We also conclude that the apsidal advance -- if present at all -- is much slower than that estimated in a previous study. The orbital period might be increasing by 0.28 s per year but also this finding is very uncertain and needs verification by future observations. It is encouraging to note that two completely independent sets of programs for light-curve solutions lead to identical results. A notable finding is that both binary components rotate with very similar -- if not identical -- rotational periods of 1.45d and 1.40d, much shorter than what would correspond to a 10.9d spin-orbit synchronization period at periastron. Rapid line-profile changes reported earlier could not be confirmed from new, dedicated series of high-resolution and S/N spectra. (2 data files).

  4. Link the EOC4 catalog to the ICRS.

    NASA Astrophysics Data System (ADS)

    Ron, Cyril; Vondrak, Jan

    2012-08-01

    One of the method, used to link Hipparcos reference frame to the International Celestial Reference System (ICRS) Kovalevsky e t al. 1997, A& A 323), was an indirect method using Celestial Pole Offsets (CPO) derived from optical astrometry observations in period 1900 - 1992 (Vondrak et al. 1997, A&A 319). The last solution of Earth Orientation Parameters (EOP) including CPO from the Optical Astrometry observations in the period 1900 - 1992 was published recently (Vondrak et al. 2010). The solution is done in the reference system of the catalog EOC4 Vondrak, Stefka, 2010, A&A 509). The CPO show statistically significant linear trends (dX=29mas/cy, dY= 9mas/cy) although the latest precession/nutation model IAU2000/ was used for the reduction of observations. The trends are of the same order (+ - 0.25mas/yr) as the standard error of the spin of Hipparcos reference frame declared in Kovalevsky et al. (1997). The analysis of the trends and their possible implication to the slight rotation of the ICRS representation at the optical wavelengths will be discussed.

  5. Cloning, expression and functional characterization of the polyunsaturated fatty acid elongase (ELOVL5) gene from sea cucumber (Apostichopus japonicus).

    PubMed

    Li, Wenxia; Feng, Zhengfu; Song, Xiaojun; Zhu, Wei; Hu, Yanjiang

    2016-11-15

    Long chain polyunsaturated fatty acid (PUFA) are beneficial for maintaining the health, growth and development of an organism and could reduce the risk of some diseases. The ability to endogenously produce PUFA, especially in invertebrates, is largely unknown. To study the function of elongase genes in the PUFA biosynthesis of Apostichopus japonicus, we cloned an ELOVL5 homology gene from intestinal cDNA of A. japonicus (Aj-ELOVL5). The Aj-ELOVL5 gene encoded a 318 amino acid (AA) protein that exhibited all the characteristics of the ELOVL5 family, such as a histidine box motif and four putative transmembrane-spanning domains. The results of the tissue expression profile of Aj-ELOVL5 revealed that the body wall exhibited the highest expression level compared with other adult tissues. We also found that the Aj-ELOVL5 enzyme exhibited the ability to elongate γ-linolenic acid (18:3 n-6) and eicosapentaenoic acid (20:5 n-3) to dihomo-γ-linolenic acid (20:3 n-6) and docosapentaenoic acid (22:5 n-3), respectively. Our results indicated that the Aj-ELOVL5 enzyme had the capacity to biosynthesize PUFA from C18/C20 PUFA substrates.

  6. RNA polymerase II subunit RPB3 is an essential component of the mRNA transcription apparatus.

    PubMed Central

    Kolodziej, P; Young, R A

    1989-01-01

    To improve our understanding of RNA polymerase II, the gene that encodes its third-largest subunit, RPB3, was isolated from a lambda gt11 DNA library by using antibody probes. The RPB3 DNA sequence predicts a 318-amino-acid protein whose sequence was confirmed, in part, by microsequence analysis of the gel-purified RNA polymerase II subunit. RPB3 was found to be an essential single-copy gene that is tightly linked to HIS6 on chromosome IX. An RPB3 temperature-sensitive mutant that arrested growth after three to four generations at the restrictive temperature was isolated. When the mutant was shifted to the restrictive temperature, RNA polymerase II could no longer assemble, previously assembled functional enzyme was depleted, and mRNA levels were consequently reduced. These results demonstrate that RPB3 is an essential component of the mRNA transcription apparatus. Finally, the RPB3 protein is similar in sequence and length to RPC5, a subunit common to RNA polymerases I and III, suggesting that these subunits may play similar roles in RNA polymerases I, II, and III. Images PMID:2685562

  7. Cloning, expression and functional characterization of the polyunsaturated fatty acid elongase (ELOVL5) gene from sea cucumber (Apostichopus japonicus).

    PubMed

    Li, Wenxia; Feng, Zhengfu; Song, Xiaojun; Zhu, Wei; Hu, Yanjiang

    2016-11-15

    Long chain polyunsaturated fatty acid (PUFA) are beneficial for maintaining the health, growth and development of an organism and could reduce the risk of some diseases. The ability to endogenously produce PUFA, especially in invertebrates, is largely unknown. To study the function of elongase genes in the PUFA biosynthesis of Apostichopus japonicus, we cloned an ELOVL5 homology gene from intestinal cDNA of A. japonicus (Aj-ELOVL5). The Aj-ELOVL5 gene encoded a 318 amino acid (AA) protein that exhibited all the characteristics of the ELOVL5 family, such as a histidine box motif and four putative transmembrane-spanning domains. The results of the tissue expression profile of Aj-ELOVL5 revealed that the body wall exhibited the highest expression level compared with other adult tissues. We also found that the Aj-ELOVL5 enzyme exhibited the ability to elongate γ-linolenic acid (18:3 n-6) and eicosapentaenoic acid (20:5 n-3) to dihomo-γ-linolenic acid (20:3 n-6) and docosapentaenoic acid (22:5 n-3), respectively. Our results indicated that the Aj-ELOVL5 enzyme had the capacity to biosynthesize PUFA from C18/C20 PUFA substrates. PMID:27538705

  8. A measurement of the top quark mass with a matrix element method

    SciTech Connect

    Gibson, Adam Paul

    2006-01-01

    The authors present a measurement of the mass of the top quark. The event sample is selected from proton-antiproton collisions, at 1.96 TeV center-of-mass energy, observed with the CDF detector at Fermilab's Tevatron. They consider a 318 pb-1 dataset collected between March 2002 and August 2004. They select events that contain one energetic lepton, large missing transverse energy, exactly four energetic jets, and at least one displaced vertex b tag. The analysis uses leading-order t$\\bar{t}$ and background matrix elements along with parameterized parton showering to construct event-by-event likelihoods as a function of top quark mass. From the 63 events observed with the 318 pb-1 dataset they extract a top quark mass of 172.0 ± 2.6(stat) ± 3.3(syst) GeV/c2 from the joint likelihood. The mean expected statistical uncertainty is 3.2 GeV/c2 for m $\\bar{t}$ = 178 GTeV/c2 and 3.1 GeV/c2 for m $\\bar{t}$ = 172.5 GeV/c2. The systematic error is dominated by the uncertainty of the jet energy scale.

  9. Precision top-quark mass measurement in the lepton+jets topology in p p collisions at square root s=1.96 TeV.

    PubMed

    Abulencia, A; Acosta, D; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Ambrose, D; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arguin, J-F; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Bachacou, H; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Bedeschi, F; Behari, S; Belforte, S; Bellettini, G; Bellinger, J; Belloni, A; Ben-Haim, E; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bishai, M; Blair, R E; Blocker, C; Bloom, K; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Bourov, S; Boveia, A; Brau, B; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carlsmith, D; Carosi, R; Carron, S; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chapman, J; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Chu, P H; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciljak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Connolly, A; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Cruz, A; Cuevas, J; Culbertson, R; Currat, C; Cyr, D; DaRonco, S; D'Auria, S; D'onofrio, M; Dagenhart, D; de Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; Dell'Orso, M; Demers, S; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Dionisi, C; Dittmann, J; DiTuro, P; Dörr, C; Dominguez, A; Donati, S; Donega, M; Dong, P; Donini, J; Dorigo, T; Dube, S; Ebina, K; Efron, J; Ehlers, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Flores-Castillo, L R; Foland, A; Forrester, S; Foster, G W; Franklin, M; Freeman, J C; Fujii, Y; Furic, I; Gajjar, A; Gallinaro, M; Galyardt, J; Garcia, J E; Garcia Sciveres, M; Garfinkel, A F; Gay, C; Gerberich, H; Gerchtein, E; Gerdes, D; Giagu, S; Giannetti, P; Gibson, A; Gibson, K; Ginsburg, C; Giolo, K; Giordani, M; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Gotra, Y; Goulianos, K; Gresele, A; Griffiths, M; Grinstein, S; Grosso-Pilcher, C; Grundler, U; da Costa, J Guimaraes; Haber, C; Hahn, S R; Hahn, K; Halkiadakis, E; Hamilton, A; Han, B-Y; Handler, R; Happacher, F; Hara, K; Hare, M; Harper, S; Harr, R F; Harris, R M; Hatakeyama, K; Hauser, J; Hays, C; Hayward, H; Heijboer, A; Heinemann, B; Heinrich, J; Hennecke, M; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Huston, J; Ikado, K; Incandela, J; Introzzi, G; Iori, M; Ishizawa, Y; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jensen, H; Jeon, E J; Jones, M; Joo, K K; Jun, S Y; Junk, T R; Kamon, T; Kang, J; Karagoz-Unel, M; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, M S; Kim, S B; Kim, S H; Kim, Y K; Kirby, M; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kobayashi, H; Kondo, K; Kong, D J; Konigsberg, J; Kordas, K; Korytov, A; Kotwal, A V; Kovalev, A; Kraus, J; Kravchenko, I; Kreps, M; Kreymer, A; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kuhlmann, S E; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; Lecci, C; LeCompte, T; Lee, J; Lee, J; Lee, S W; Lee, Y J; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Li, K; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Liss, T M; Lister, A; Litvintsev, D O; Liu, T; Liu, Y; Lockyer, N S; Loginov, A; Loreti, M; Loverre, P; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Maksimovic, P; Manca, G; Margaroli, F; Marginean, R; Marino, C; Martin, A; Martin, M; Martin, V; Martínez, M; Maruyama, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McGivern, D; McIntyre, P; McNamara, P; McNulty, R; Mehta, A; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; von der Mey, M; Miao, T; Miladinovic, N; Miles, J; Miller, R; Miller, J S; Mills, C; Milnik, M; Miquel, R; Miscetti, S; Mitselmakher, G; Miyamoto, A; Moggi, N; Mohr, B; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Mulhearn, M; Muller, Th; Mumford, R; Murat, P; Nachtman, J; Nahn, S; Nakano, I; Napier, A; Naumov, D; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nigmanov, T; Nodulman, L; Norniella, O; Ogawa, T; Oh, S H; Oh, Y D; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Paoletti, R; Papadimitriou, V; Papikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pitts, K; Plager, C; Pondrom, L; Pope, G; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Rakitin, A; Rappoccio, S; Ratnikov, F; Reisert, B; Rekovic, V; van Remortel, N; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Rinnert, K; Ristori, L; Robertson, W J; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Rott, C; Ruiz, A; Russ, J; Rusu, V; Ryan, D; Saarikko, H; Sabik, S; Safonov, A; Sakumoto, W K; Salamanna, G; Salto, O; Saltzberg, D; Sanchez, C; Santi, L; Sarkar, S; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Semeria, F; Sexton-Kennedy, L; Sfiligoi, I; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Siegrist, J; Sill, A; Sinervo, P; Sisakyan, A; Sjolin, J; Skiba, A; Slaughter, A J; Sliwa, K; Smirnov, D; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sumorok, K; Sun, H; Suzuki, T; Taffard, A; Tafirout, R; Takashima, R; Takeuchi, Y; Takikawa, K; Tanaka, M; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Tether, S; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tollefson, K; Tomura, T; Tonelli, D; Tönnesmann, M; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuchiya, R; Tsuno, S; Turini, N; Ukegawa, F; Unverhau, T; Uozumi, S; Usynin, D; Vacavant, L; Vaiciulis, A; Vallecorsa, S; Varganov, A; Vataga, E; Velev, G; Veramendi, G; Veszpremi, V; Vickey, T; Vidal, R; Vila, I; Vilar, R; Vollrath, I; Volobouev, I; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, W; Wallny, R; Walter, T; Wan, Z; Wang, M J; Wang, S M; Warburton, A; Ward, B; Waschke, S; Waters, D; Watts, T; Weber, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Worm, S; Wright, T; Wu, X; Wynne, S M; Xie, S; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, Y; Yang, C; Yang, U K; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zetti, F; Zhang, X; Zhou, J; Zucchelli, S

    2006-01-20

    We report two measurements of the top-quark mass M(top) using the CDF II detector at the Fermilab Tevatron in a 318 pb(-1) data sample of tt events in the lepton+jets final state. One method uses an event-based likelihood technique resulting in M(top) = 173.2(-2.4)(+2.6)(stat) +/- 3.2(syst) GeV/c2 or 173.2(-4.0)(+4.1) GeV/c2. The second method reconstructs a top-quark mass in each event using the measured invariant mass of the hadronically decaying W boson to constrain the jet energy scale to obtain a value for M(top)of 173.5(-3.6)(+3.7)(stat) +/- 1.3(syst) GeV/c2 or 173.5(-3.8)(+3.9) GeV/c2 . We take the latter, which is more precise, as our result. PMID:16486564

  10. Models for ionic contribution to the complex dielectric constant of nematic liquid crystals.

    PubMed

    Alexe-Ionescu, A L; Barbero, G; Lelidis, I

    2009-12-01

    We analyze the models that account the ionic contribution to the complex dielectric constant of a nematic liquid crystal. We compare the predictions of the model of [Sawada, Mol. Cryst. Liq. Cryst. Sci. Technol., Sect. A 318, 225 (1998)] based on the assumption that the electric field in the liquid coincides with the applied one, with the model of Macdonald where the electric field in the sample is determined in self-consistent manner by solving the equation of Poisson. We show that the model of Sawada , widely used to determine the bulk density of ions and their diffusion coefficient in liquid crystal cells, predicts a thickness dependence of the real and imaginary parts of the dielectric constant different from that predicted by the model of Macdonald. On the contrary, the predictions of the two models coincide for what concerns the frequency dependencies of the two components of the dielectric constant. By considering a typical case, we show that the numerical values of the ionic properties derived by means of the model of Sawada may differ even more than 1 order of magnitude by those predicted by the model of Macdonald. A rescaling procedure allowing to evaluate the bulk density of ions and the ionic diffusion coefficient determined by means of the model of Sawada in agreement with the one of Macdonald is proposed.

  11. A five-year study of solar ultraviolet radiation in southern Chile (39 degrees S): potential impact on physiology of coastal marine algae?

    PubMed

    Huovinen, Pirjo; Gómez, Iván; Lovengreen, Charlotte

    2006-01-01

    This study reports 5 years of (1998-2003) data on continuous solar-irradiation measurements from a scanning spectroradiometer (SUV-100) in Valdivia, Chile (39 degrees S), accompanied by evaluation of the impact of ultraviolet radiation (UVR) on marine macroalgae of this site. UVR conditions showed a strong seasonal variation, which was less pronounced toward longer wavelengths. Daily maximum dose rates (clear days) averaged in winter-summer: UV-B(290-315 nm) 0.30-2.1, UV-B(290-320 nm) 0.70-3.7, UV-A(315-400 nm) 20.6-62.1, UV-A(320-400 nm) 20.2-60.5 W m(-2), and photosynthetically active radiation (PAR) 969-2423 micromol m(-2) s(-1). The corresponding daily doses (all the days) ranged: UV-B(290-315 nm) 2.6-40.7, UV-B(290-320 nm) 6.7-78.5, UV-A(315-400 nm) 228-1539, UV-A(320-400 nm) 224-1501, and PAR 2008-13308 kJ m(-2) d(-1). Taking into consideration action spectra of a biological interest, the risk of UV exposure could be up to 37 times higher in summer than in winter. The photosynthetic activity (as maximum quantum yield of chlorophyll fluorescence, F(v)/F(m)) of the brown alga Lessonia nigrescens from the infralittoral zone was markedly more sensitive to UVR than of the green alga Enteromorpha intestinalis from the upper midlittoral, and the UV-B wave band increased markedly photoinhibition. In L. nigrescens, maximal photoinhibition (40%) took place at weighted (the action spectrum for photoinhibition of photosynthesis) UVR doses of 800 kJ m(-2), irrespective of the season (corresponding midsummer daily dose in Valdivia is 480 kJ m(-2)). In winter, when this alga was at its most sensitive, the weighted UV dose causing 35-40% photoinhibition was around 200 kJ m(-2). In E. intestinalis, weighted doses of 800 kJ m(-2) resulted in low photoinhibition (<10 %) and no clear seasonal patterns could be inferred. These results confirm that midday summer levels of UV-B and their daily doses in southern Chile are high enough to produce stress to intertidal macroalgae.

  12. LOXL1 gene analysis in Turkish patients with exfoliation glaucoma.

    PubMed

    Yilmaz, Suzan Guven; Palamar, Melis; Onay, Huseyin; Ilim, Orhan; Aykut, Ayca; Ozkinay, Feristah Ferda; Yagci, Ayse

    2016-10-01

    The purpose of this study is to evaluate whole lysyl oxidase like 1 (LOXL1) gene by sequence analysis in Turkish patients with exfoliation glaucoma (XFG). A total of 48 (35 male, 13 female) patients with XFG were enrolled. Besides routine ophthalmological examination, peripapillary retinal nerve fibre layer (RNFL) analysis with optic coherence tomography was performed. Blood samples of 2 ml with EDTA were obtained and sent to Medical Genetics Department, Molecular Genetics Laboratory for LOXL1 polymorphism (PCR and agarose gel imaging) analysis. The role of the detected changes on disease severity was evaluated. No LOXL1 gene mutations in any of the patients were detected. Three types of single-nucleotide polymorphisms (SNPs) including R141L(rs1048661), A320A(rs41435250), and F184F were detected in 17 (35.3 %) patients. When compared, SNP-positive patients had thinner RNFL than SNP-negative patients (64.5 ± 17.6 and 66.1 ± 20.4 µ, respectively), and SNP-positive patients had higher cupping/disc ratio than SNP-negative patients (0.76 ± 0.2 and 0.70 ± 0.3, respectively). However, both values were not statistically significant (p = 0.966 and p = 0.539, respectively). When compared, R141L-positive patients had significantly thinner cornea thickness (516.11 ± 30.3 µ) than R141L-negative patients (556.69 ± 27.2 µ) (p = 0.004). There was not any statistical significant difference in the means of age, gender, BCVA, MD, PSD, IOP, number of hypotensive agents, and percent of glaucoma surgery (p > 0.05). In this study group of Turkish population, no LOXL1 mutations were found. No associations between the defined SNPs (A320A, R141L and F184F) and the severity of the disease were detected. PMID:26758070

  13. Aircraft type influence on contrail properties

    NASA Astrophysics Data System (ADS)

    Jeßberger, P.; Voigt, C.; Schumann, U.; Sölch, I.; Schlager, H.; Kaufmann, S.; Petzold, A.; Schäuble, D.; Gayet, J.-F.

    2013-05-01

    The investigation of the impact of aircraft parameters on contrail properties helps to better understand the climate impact from aviation. Yet, in observations, it is a challenge to separate aircraft and meteorological influences on contrail formation. During the CONCERT campaign in November 2008, contrails from 3 Airbus passenger aircraft of type A319-111, A340-311 and A380-841 were probed at cruise under similar meteorological conditions with in-situ instruments on board the DLR research aircraft Falcon. Within the 2 min old contrails detected near ice saturation, we find similar effective diameters Deff (5.2-5.9 μm), but differences in particle number densities nice (162-235 cm-3) and in vertical contrail extensions (120-290 m), resulting in large differences in contrail optical depths τ (0.25-0.94). Hence larger aircraft produce optically thicker contrails. Based on the observations, we apply the EULAG-LCM model with explicit ice microphysics and in addition the Contrail and Cirrus Prediction model CoCiP to calculate the aircraft type impact on young contrails under identical meteorological conditions. The observed increase in τ for heavier aircraft is confirmed by the models, yet for generally smaller τ. An aircraft dependence of climate relevant contrail properties persists during contrail lifetime, adding importance to aircraft dependent model initialization. We finally derive an analytical relationship between contrail, aircraft and meteorological parameters. Near ice saturation, contrail width × τ scales linearly with fuel flow rate as confirmed by observations. For higher saturation ratios approximations from theory suggest a non-linear increase in the form (RHI-1)2/3. Summarized our combined results could help to more accurately assess the climate impact from aviation using an aircraft dependent contrail parameterization.

  14. Aircraft type influence on contrail properties

    NASA Astrophysics Data System (ADS)

    Jeßberger, P.; Voigt, C.; Schumann, U.; Sölch, I.; Schlager, H.; Kaufmann, S.; Petzold, A.; Schäuble, D.; Gayet, J.-F.

    2013-12-01

    The investigation of the impact of aircraft parameters on contrail properties helps to better understand the climate impact from aviation. Yet, in observations, it is a challenge to separate aircraft and meteorological influences on contrail formation. During the CONCERT campaign in November 2008, contrails from 3 Airbus passenger aircraft of types A319-111, A340-311 and A380-841 were probed at cruise under similar meteorological conditions with in situ instruments on board DLR research aircraft Falcon. Within the 2 min-old contrails detected near ice saturation, we find similar effective diameters Deff (5.2-5.9 μm), but differences in particle number densities nice (162-235 cm-3) and in vertical contrail extensions (120-290 m), resulting in large differences in contrail optical depths τ at 550 nm (0.25-0.94). Hence larger aircraft produce optically thicker contrails. Based on the observations, we apply the EULAG-LCM model with explicit ice microphysics and, in addition, the Contrail and Cirrus Prediction (CoCiP) model to calculate the aircraft type impact on young contrails under identical meteorological conditions. The observed increase in τ for heavier aircraft is confirmed by the models, yet for generally smaller τ. CoCiP model results suggest that the aircraft dependence of climate-relevant contrail properties persists during contrail lifetime, adding importance to aircraft-dependent model initialization. We finally derive an analytical relationship between contrail, aircraft and meteorological parameters. Near ice saturation, contrail width × τ scales linearly with the fuel flow rate, as confirmed by observations. For higher relative humidity with respect to ice (RHI), the analytical relationship suggests a non-linear increase in the form (RHI-12/3. Summarized, our combined results could help to more accurately assess the climate impact from aviation using an aircraft-dependent contrail parameterization.

  15. A correlation linking the predicted mean vote and the mean thermal vote based on an investigation on the human thermal comfort in short-haul domestic flights.

    PubMed

    Giaconia, Carlo; Orioli, Aldo; Di Gangi, Alessandra

    2015-05-01

    The results of an experimental investigation on the human thermal comfort inside the cabin of some Airbus A319 aircrafts during 14 short-haul domestic flights, linking various Italian cities, are presented and used to define a correlation among the predicted mean vote (PMV), a procedure which is commonly used to assess the thermal comfort in inhabited environments, and the equivalent temperature and mean thermal vote (MTV), which are the parameters suggested by the European Standard EN ISO 14505-2 for the evaluation of the thermal environment in vehicles. The measurements of the radiant temperature, air temperature and relative humidity during flights were performed. The air temperature varied between 22.2 °C and 26.0 °C; the relative humidity ranged from 8.7% to 59.2%. The calculated values of the PMV varied from -0.16 to 0.90 and were confirmed by the answers of the passengers. The equivalent temperature was evaluated using the equations of Fanger or on the basis of the values of the skin temperature measured on some volunteers. The correlation linking the thermal sensation scales and zones used by the PMV and the MTV resulted quite accurate because the minimum value of the absolute difference between such environmental indexes equalled 0.0073 and the maximum difference did not exceed the value of 0.0589. Even though the equivalent temperature and the MTV were specifically proposed to evaluate the thermal sensation in vehicles, their use may be effectively extended to the assessment of the thermal comfort in airplanes or other occupied places. PMID:25683547

  16. A pepper (Capsicum annuum L.) metacaspase 9 (Camc9) plays a role in pathogen-induced cell death in plants.

    PubMed

    Kim, Su-Min; Bae, Chungyun; Oh, Sang-Keun; Choi, Doil

    2013-08-01

    Metacaspases, which belong to the cysteine-type C14 protease family, are most structurally similar to mammalian caspases than any other caspase-like protease in plants. Atmc9 (Arabidopsis thaliana metacaspase 9) has a unique domain structure, and distinct biochemical characteristics, such as Ca²⁺ binding, pH, redox status, S-nitrosylation and specific protease inhibitors. However, the biological roles of Atmc9 in plant-pathogen interactions remain largely unknown. In this study, a metacaspase gene present as a single copy in the pepper genome, and sharing 54% amino acid sequence identity with Atmc9, was isolated and named Capsicum annuum metacaspase 9 (Camc9). Camc9 encodes a 318-amino-acid polypeptide with an estimated molecular weight of 34.6 kDa, and shares approximately 40% amino acid sequence identity with known type II metacaspases in plants. Quantitative reverse transcription-polymerase chain reaction analyses revealed that the expression of Camc9 was induced by infections of Xanthomonas campestris pv. vesicatoria race 1 and race 3 and treatment with methyl jasmonate. Suppression of Camc9 expression using virus-induced gene silencing enhanced disease resistance and suppressed cell death symptom development following infection with virulent bacterial pathogens. By contrast, overexpression of Camc9 by transient or stable transformation enhanced disease susceptibility and pathogen-induced cell death by regulation of reactive oxygen species production and defence-related gene expression. These results suggest that Camc9 is a possible member of the metacaspase gene family and plays a role as a positive regulator of pathogen-induced cell death in the plant kingdom.

  17. Utility Advanced Turbine Systems program (ATS) technical readiness testing and pre-commercial demonstration. First quarterly report, 1997

    SciTech Connect

    Brushwood, J.

    1997-09-01

    The objective of the ATS program is to develop ultra-high efficiency, environmentally-superior and cost competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Specific performance targets have been set using natural gas as the primary fuel: (1) System efficiency that will exceed 60% (lower heating value basis) on natural gas for large scale utility turbine systems; for industrial applications, systems that will result in a 15% improvement in heat rate compared to currently available gas turbine systems. (2) An environmentally superior system that will not require the use of post combustion emissions controls under full load operating conditions. (3) Busbar energy costs that are 10% less than current state-of-the-art turbine systems, while meeting the same environmental requirements. (4) Fuel-flexible designs that will operate on natural gas but are capable of being adapted to operate on coal-derived or biomass fuels. (5) Reliability- Availability-Maintainability (RAM) that is equivalent to the current turbine systems. (6) Water consumption minimized to levels consistent with cost and efficiency goals. (7) Commercial systems that will enter the market in the year 2000. In Phase 1 of the ATS program, Westinghouse found that efficiency significantly increases when the traditional combined-cycle power plant is re-configured with closed- loop steam cooling of the hot gas path. Phase II activities involved the development of a 318MW natural gas fired turbine conceptual design with the flexibility to bum coal-derived and biomass fuels. Phases I and II of the ATS program have been completed. Phase III, the current phase, completes the research and development activities and develops hardware specifications from the Phase II conceptual design. Future Phase IV activities consist of manufacturing, constructing,

  18. Tree-ring-based drought reconstruction in the Iberian Range (east of Spain) since 1694

    NASA Astrophysics Data System (ADS)

    Tejedor, Ernesto; de Luis, Martín; Cuadrat, José María; Esper, Jan; Saz, Miguel Ángel

    2016-03-01

    Droughts are a recurrent phenomenon in the Mediterranean basin with negative consequences for society, economic activities, and natural systems. Nevertheless, the study of drought recurrence and severity in Spain has been limited so far due to the relatively short instrumental period. In this work, we present a reconstruction of the standardized precipitation index (SPI) for the Iberian Range. Growth variations and climatic signals within the network are assessed developing a correlation matrix and the data combined to a single chronology integrating 336 samples from 169 trees of five different pine species distributed throughout the province of Teruel. The new chronology, calibrated against regional instrumental climatic data, shows a high and stable correlation with the July SPI integrating moisture conditions over 12 months forming the basis for a 318-year drought reconstruction. The climate signal contained in this reconstruction is highly significant ( p < 0.05) and spatially robust over the interior areas of Spain located above 1000 meters above sea level (masl). According to our SPI reconstruction, seven substantially dry and five wet periods are identified since the late seventeenth century considering ≥±1.76 standard deviations. Besides these, 36 drought and 28 pluvial years were identified. Some of these years, such as 1725, 1741, 1803, and 1879, are also revealed in other drought reconstructions in Romania and Turkey, suggesting that coherent larger-scale synoptic patterns drove these extreme deviations. Since regional drought deviations are also retained in historical documents, the tree-ring-based reconstruction presented here will allow us to cross-validate drought frequency and magnitude in a highly vulnerable region.

  19. Biogeochemical properties and diagenetic changes during the past 3.6 Ma recorded by FTIR spectroscopy in the sediment record of Lake El'gygytgyn, Far East Russian Arctic

    NASA Astrophysics Data System (ADS)

    Meyer-Jacob, C.; Vogel, H.; Melles, M.; Rosén, P.

    2013-05-01

    A number of studies have shown that Fourier transform infrared spectroscopy (FTIRS) can be applied to quantitatively assess lacustrine sediment constituents. In this study, we developed calibration models based on FTIRS for the quantitative determination of biogenic silica (BSi; n = 420; gradient: 0.9-56.5%), total organic carbon (TOC; n = 309; gradient: 0.02-2.89%), and total inorganic carbon (TIC; n = 153; gradient: 0.01-1.46%) in a 318 m long sediment record with a basal age of 3.6 Ma from Lake El'gygytgyn, Far East Russian Arctic. The developed partial least squares regression (PLSR) models yield high cross-validated (CV) R2CV = 0.85-0.91 and low root mean square error of cross-validation (RMSECV) (2.1-4.3% of the gradient for the different properties). The FTIRS-inferred concentrations of BSi, TOC, and TIC provide an initial insight into the climatic and environmental evolution at Lake El'gygytgyn throughout the late Pliocene and Quaternary showing a considerably high bioproductivity in the lake ecosystem between ~ 3.27-3.54 Ma during the early Pliocene warm period. Moreover, we found that the recorded FTIR spectra contain information on sample burial depth as a result of diagenetic changes (dehydration/dehydroxilation) of certain mineral phases. Despite the indicated post-depositional processes, the calibration models yield good statistical performances showing that general FTIRS models can be developed for several hundred meters long records extending several million years back in time. Our results highlight FTIRS to be a rapid, cost-effective alternative to conventional methods for quantification of biogeochemical properties.

  20. Biogeochemical variability during the past 3.6 million years recorded by FTIR spectroscopy in the sediment record of Lake El'gygytgyn, Far East Russian Arctic

    NASA Astrophysics Data System (ADS)

    Meyer-Jacob, C.; Vogel, H.; Gebhardt, A. C.; Wennrich, V.; Melles, M.; Rosén, P.

    2014-01-01

    A number of studies have shown that Fourier transform infrared spectroscopy (FTIRS) can be applied to quantitatively assess lacustrine sediment constituents. In this study, we developed calibration models based on FTIRS for the quantitative determination of biogenic silica (BSi; n = 420; gradient: 0.9-56.5%), total organic carbon (TOC; n = 309; gradient: 0-2.9%), and total inorganic carbon (TIC; n= 152; gradient: 0-0.4%) in a 318 m-long sediment record with a basal age of 3.6 million years from Lake El'gygytgyn, Far East Russian Arctic. The developed partial least squares (PLS) regression models yield high cross-validated (CV) R2CV = 0.86-0.91 and low root mean square error of cross-validation (RMSECV) (3.1-7.0% of the gradient for the different properties). By applying these models to 6771 samples from the entire sediment record, we obtained detailed insight into bioproductivity variations in Lake El'gygytgyn throughout the middle to late Pliocene and Quaternary. High accumulation rates of BSi indicate a productivity maximum during the middle Pliocene (3.6-3.3 Ma), followed by gradually decreasing rates during the late Pliocene and Quaternary. The average BSi accumulation during the middle Pliocene was ~3 times higher than maximum accumulation rates during the past 1.5 million years. The indicated progressive deterioration of environmental and climatic conditions in the Siberian Arctic starting at ca. 3.3 Ma is consistent with the first occurrence of glacial periods and the finally complete establishment of glacial-interglacial cycles during the Quaternary.

  1. Phylogeography and Post-Glacial Recolonization in Wolverines (Gulo gulo) from across Their Circumpolar Distribution

    PubMed Central

    Zigouris, Joanna; Schaefer, James A.; Fortin, Clément; Kyle, Christopher J.

    2013-01-01

    Interglacial-glacial cycles of the Quaternary are widely recognized in shaping phylogeographic structure. Patterns from cold adapted species can be especially informative - in particular, uncovering additional glacial refugia, identifying likely recolonization patterns, and increasing our understanding of species’ responses to climate change. We investigated phylogenetic structure of the wolverine, a wide-ranging cold adapted carnivore, using a 318 bp of the mitochondrial DNA control region for 983 wolverines (n = 209 this study, n = 774 from GenBank) from across their full Holarctic distribution. Bayesian phylogenetic tree reconstruction and the distribution of observed pairwise haplotype differences (mismatch distribution) provided evidence of a single rapid population expansion across the wolverine’s Holarctic range. Even though molecular evidence corroborated a single refugium, significant subdivisions of population genetic structure (0.01< ΦST <0.99, P<0.05) were detected. Pairwise ΦST estimates separated Scandinavia from Russia and Mongolia, and identified five main divisions within North America - the Central Arctic, a western region, an eastern region consisting of Ontario and Quebec/Labrador, Manitoba, and California. These data are in contrast to the nearly panmictic structure observed in northwestern North America using nuclear microsatellites, but largely support the nuclear DNA separation of contemporary Manitoba and Ontario wolverines from northern populations. Historic samples (c. 1900) from the functionally extirpated eastern population of Quebec/Labrador displayed genetic similarities to contemporary Ontario wolverines. To understand these divergence patterns, four hypotheses were tested using Approximate Bayesian Computation (ABC). The most supported hypothesis was a single Beringia incursion during the last glacial maximum that established the northwestern population, followed by a west-to-east colonization during the Holocene. This

  2. Human gamma-glutamyl hydrolase: cloning and characterization of the enzyme expressed in vitro.

    PubMed Central

    Yao, R; Schneider, E; Ryan, T J; Galivan, J

    1996-01-01

    A cDNA encoding human gamma-glutamyl hydrolase has been identified by searching an expressed sequence tag data base and using rat gamma-glutamyl hydrolase cDNA as the query sequence. The cDNA encodes a 318-amino acid protein of Mr 35,960. The deduced amino acid sequence of human gamma-glutamyl hydrolase shows 67% identity to that of rat gamma-glutamyl hydrolase. In both rat and human the 24 amino acids preceding the N terminus constitute a structural motif that is analogous to a leader or signal sequence. There are four consensus asparagine glycosylation sites in the human sequence, with three of them conserved in the rat enzyme. Expression of both the human and rat cDNA in Escherichia coli produced antigenically related proteins with enzyme activities characteristic of the native human and rat enzymes, respectively, when methotrexate di- or pentaglutamate were used as substrates. With the latter substrate the rat enzyme cleaved the innermost gamma-glutamyl linkage resulting in the sole production of methotrexate as the pteroyl containing product. The human enzyme differed in that it produced methotrexate tetraglutamate initially, followed by the triglutamate, and then the diglutamate and methotrexate. Hence the rat enzyme is an endopeptidase with methotrexate pentaglutamate as substrate, whereas the human enzyme exhibits exopeptidase activity. Another difference is that the expressed rat enzyme is equally active on methotrexate di- and pentaglutamate whereas the human enzyme has severalfold greater activity on methotrexate pentaglutamate compared with the diglutamate. These properties are consistent with the enzymes derived from human and rat sources. Images Fig. 3 PMID:8816764

  3. Along-strike structure of the Costa Rican convergent margin from seismic a refraction/reflection survey: Evidence for underplating beneath the inner forearc

    NASA Astrophysics Data System (ADS)

    St. Clair, J.; Holbrook, W. S.; Van Avendonk, H. J. A.; Lizarralde, D.

    2016-02-01

    The convergent margin offshore Costa Rica shows evidence of subsidence due to subduction erosion along the outer forearc and relatively high rates of uplift (˜3-6 mm/yr) along the coast. Recently erupted arc lavas exhibit a low 10Be signal, suggesting that although nearly the entire package of incoming sediments enters the subduction zone, very little of that material is carried directly with the downgoing Cocos plate to the magma generating depths of the mantle wedge. One mechanism that would explain both the low 10Be and the coastal uplift is the underplating of sediments, tectonically eroded material, and seamounts beneath the inner forearc. We present results of a 320 km long, trench-parallel seismic reflection and refraction study of the Costa Rican forearc. The primary observations are (1) margin perpendicular faulting of the basement, (2) thickening of the Cocos plate to the northwest, and (3) two weak bands of reflections in the multichannel seismic (MCS) reflection image with travel times similar to the top of the subducting Cocos plate. The modeled depths to these reflections are consistent with an ˜40 km long, 1-3 km thick region of underplated material ˜15 km beneath some of the highest observed coastal uplift rates in Costa Rica.

  4. High Methylmercury in Arctic and Subarctic Ponds is Related to Nutrient Levels in the Warming Eastern Canadian Arctic.

    PubMed

    MacMillan, Gwyneth A; Girard, Catherine; Chételat, John; Laurion, Isabelle; Amyot, Marc

    2015-07-01

    Permafrost thaw ponds are ubiquitous in the eastern Canadian Arctic, yet little information exists on their potential as sources of methylmercury (MeHg) to freshwaters. They are microbially active and conducive to methylation of inorganic mercury, and are also affected by Arctic warming. This multiyear study investigated thaw ponds in a discontinuous permafrost region in the Subarctic taiga (Kuujjuarapik-Whapmagoostui, QC) and a continuous permafrost region in the Arctic tundra (Bylot Island, NU). MeHg concentrations in thaw ponds were well above levels measured in most freshwater ecosystems in the Canadian Arctic (>0.1 ng L(-1)). On Bylot, ice-wedge trough ponds showed significantly higher MeHg (0.3-2.2 ng L(-1)) than polygonal ponds (0.1-0.3 ng L(-1)) or lakes (<0.1 ng L(-1)). High MeHg was measured in the bottom waters of Subarctic thaw ponds near Kuujjuarapik (0.1-3.1 ng L(-1)). High water MeHg concentrations in thaw ponds were strongly correlated with variables associated with high inputs of organic matter (DOC, a320, Fe), nutrients (TP, TN), and microbial activity (dissolved CO2 and CH4). Thawing permafrost due to Arctic warming will continue to release nutrients and organic carbon into these systems and increase ponding in some regions, likely stimulating higher water concentrations of MeHg. Greater hydrological connectivity from permafrost thawing may potentially increase transport of MeHg from thaw ponds to neighboring aquatic ecosystems.

  5. Degradation of methyl and ethyl mercury by singlet oxygen generated from sea water exposed to sunlight or ultraviolet light.

    PubMed

    Suda, I; Suda, M; Hirayama, K

    1993-01-01

    Photodegradation of methyl mercury (MeHg) and ethyl Hg (EtHg) in sea water was studied by sunlight or ultraviolet (UV) light exposure, and by determining inorganic Hg produced by degradation. Sea water containing 1 microM MeHg or EtHg was exposed to sunlight or UV light. N-Acetyl-L-cysteine was added to the solution for preventing Hg loss during the light exposure. MeHg and EtHg in sea water were degraded by sunlight (> 280 nm), UV light A (320-400 nm) and UV light B (280-320 nm), though the amounts of inorganic Hg produced from MeHg were 1/6th to 1/12th those from EtHg. Inorganic Hg production was greater with increasing concentration of sea water. Degradation of MeHg and EtHg by the UV light A exposure was inhibited by singlet oxygen (1O2) trappers such as NaN3, 1,4-diazabicyclo[2,2,2]octane, histidine, methionine and 2,5-dimethylfuran. On the other hand, inhibitors or scavengers of superoxide anion, hydrogen peroxide or hydroxyl radical did not inhibit the photodegradation of alkyl Hg. These results suggested that 1O2 generated from sea water exposed to sunlight, UV light A or UV light B was the reactive oxygen species mainly responsible for the degradation of MeHg and EtHg.

  6. Characterisation of the NA62 GigaTracker end of column readout ASIC

    NASA Astrophysics Data System (ADS)

    Noy, M.; Aglieri Rinella, G.; Fiorini, M.; Jarron, P.; Kaplon, J.; Kluge, A.; Martin, E.; Morel, M.; Perktold, L.; Riedler, P.

    2011-01-01

    The architecture and characterisation of the End Of Column demonstrator readout ASIC for the NA62 GigaTracker hybrid pixel detector is presented. This ASIC serves as a proof of principle for a pixel chip with 1800 pixels which must perform time stamping to better than 200 ps (RMS), provide 300 μm pitch position information and operate with a dead-time of 1% or less for 800 MHz-1 GHz beam rate. The demonstrator ASIC comprises a full test column with 45 pixels alongside other test structures. The timewalk correction mechanism employed is measurement of the time-over-threshold, coupled with an off-detector look-up table. The time to digital converter is a delay locked loop with 32 contributing delay cells fed with a 320 MHz to yield a nominal bin size of 97 ps. Recently, P-in-N sensors have been bump-bonded to the ASIC and characterisation of these assemblies has begun.

  7. Multiple noise-like pulsing of a figure-eight fibre laser

    NASA Astrophysics Data System (ADS)

    Pottiez, O.; Ibarra-Escamilla, B.; Kuzin, E. A.; Hernández-García, J. C.; González-García, A.; Durán-Sánchez, M.

    2014-01-01

    In this work we study multiple noise-like pulse generation in a 320 m long passively mode-locked erbium-doped figure-eight fibre laser in the normal net dispersion regime. The nonlinear optical loop mirror (NOLM) that is used as a mode locker operates through polarization asymmetry, which allows us to control its switching power by birefringence adjustments at the NOLM input, using a half-wave retarder (HWR). Over some range of the HWR orientation, a single noise-like pulse is observed in the cavity. Its peak power is adjustable as it remains clamped to the variable switching power, and its duration varies inversely between ˜5 and ˜22 ps. Beyond the HWR position, corresponding to the longest duration, the pulse splits into several noise-like pulses. These multiple pulses usually present a walkoff, however they can be synchronized through slight birefringence adjustments, although they are not evenly spaced in time. Up to 12 simultaneous noise-like pulses were observed experimentally, with a duration of ˜2 ns. Multiple pulsing and synchronization of the pulses are interpreted in terms of mechanisms of interaction between pulses. Multiple pulsing appears to be indirectly related to the peak power limiting effect of the NOLM.

  8. PRIC320, a transcription coactivator, isolated from peroxisome proliferator-binding protein complex

    SciTech Connect

    Surapureddi, Sailesh; Viswakarma, Navin; Yu Songtao; Guo Dongsheng; Rao, M. Sambasiva; Reddy, Janardan K. . E-mail: jkreddy@northwestern.edu

    2006-05-05

    Ciprofibrate, a potent peroxisome proliferator, induces pleiotropic responses in liver by activating peroxisome proliferator-activated receptor {alpha} (PPAR{alpha}), a nuclear receptor. Transcriptional regulation by liganded nuclear receptors involves the participation of coregulators that form multiprotein complexes possibly to achieve cell and gene specific transcription. SDS-PAGE and matrix-assisted laser desorption/ionization reflection time-of-flight mass spectrometric analyses of ciprofibrate-binding proteins from liver nuclear extracts obtained using ciprofibrate-Sepharose affinity matrix resulted in the identification of a new high molecular weight nuclear receptor coactivator, which we designated PRIC320. The full-length human cDNA encoding this protein has an open-reading frame that codes for a 320 kDa protein containing 2882 amino acids. PRIC320 contains five LXXLL signature motifs that mediate interaction with nuclear receptors. PRIC320 binds avidly to nuclear receptors PPAR{alpha}, CAR, ER{alpha}, and RXR, but only minimally with PPAR{gamma}. PRIC320 also interacts with transcription cofactors CBP, PRIP, and PBP. Immunoprecipitation-immunoblotting as well as cellular localization studies confirmed the interaction between PPAR{alpha} and PRIC320. PRIC320 acts as a transcription coactivator by stimulating PPAR{alpha}-mediated transcription. We conclude that ciprofibrate, a PPAR{alpha} ligand, binds a multiprotein complex and PRIC320 cloned from this complex functions as a nuclear receptor coactivator.

  9. Data indicating temperature response of Ti-6Al-4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping.

    PubMed

    Marshall, Garrett J; Thompson, Scott M; Shamsaei, Nima

    2016-06-01

    An OPTOMEC Laser Engineered Net Shaping (LENS(™)) 750 system was retrofitted with a melt pool pyrometer and in-chamber infrared (IR) camera for nondestructive thermal inspection of the blown-powder, direct laser deposition (DLD) process. Data indicative of temperature and heat transfer within the melt pool and heat affected zone atop a thin-walled structure of Ti-6Al-4V during its additive manufacture are provided. Melt pool temperature data were collected via the dual-wavelength pyrometer while the dynamic, bulk part temperature distribution was collected using the IR camera. Such data are provided in Comma Separated Values (CSV) file format, containing a 752×480 matrix and a 320×240 matrix of temperatures corresponding to individual pixels of the pyrometer and IR camera, respectively. The IR camera and pyrometer temperature data are provided in blackbody-calibrated, raw forms. Provided thermal data can aid in generating and refining process-property-performance relationships between laser manufacturing and its fabricated materials.

  10. Cavity-enhanced Raman microscopy of individual carbon nanotubes

    PubMed Central

    Hümmer, Thomas; Noe, Jonathan; Hofmann, Matthias S.; Hänsch, Theodor W.; Högele, Alexander; Hunger, David

    2016-01-01

    Raman spectroscopy reveals chemically specific information and provides label-free insight into the molecular world. However, the signals are intrinsically weak and call for enhancement techniques. Here, we demonstrate Purcell enhancement of Raman scattering in a tunable high-finesse microcavity, and utilize it for molecular diagnostics by combined Raman and absorption imaging. Studying individual single-wall carbon nanotubes, we identify crucial structural parameters such as nanotube radius, electronic structure and extinction cross-section. We observe a 320-times enhanced Raman scattering spectral density and an effective Purcell factor of 6.2, together with a collection efficiency of 60%. Potential for significantly higher enhancement, quantitative signals, inherent spectral filtering and absence of intrinsic background in cavity-vacuum stimulated Raman scattering render the technique a promising tool for molecular imaging. Furthermore, cavity-enhanced Raman transitions involving localized excitons could potentially be used for gaining quantum control over nanomechanical motion and open a route for molecular cavity optomechanics. PMID:27402165

  11. Autonomous Structural Health MONITORING—PART II: Vibration-Based In-Operation Damage Assessment

    NASA Astrophysics Data System (ADS)

    Parloo, E.; Verboven, P.; Guillaume, P.; van Overmeire, M.

    2002-07-01

    Monitoring structural health of civil and industrial structures, based on in-operation modal testing, has become an important issue. Recently, a sensitivity-based damage assessment technique was presented and successfully tested on both civil and more academic structures. As shown in literature, these sensitivities can be experimentally calculated (without the use of a finite element model) on a basis of the estimated natural frequencies and mass-normalised mode shapes of the test structure in its reference condition. Since a driving point measurement is required for an easy scaling (e.g. mass-normalisation) of the mode shapes, the applicability of the method was restricted to forced-vibration tests only. In this contribution, the applicability of the sensitivity-based method is extended to the domain of operational modal analysis (output-only measurements). In a first step, a new method is used for the correct re-scaling of operational mode shape estimates that neither requires forced vibration testing nor finite element modelling. Secondly, two innovative sensitivity-based in-operation damage assessment schemes are introduced. Both methods were experimentally tested on an academic frame structure as well as a slat track of an Airbus A320 commercial aeroplane.

  12. The NH2-terminal php domain of the alpha subunit of the Escherichia coli replicase binds the epsilon proofreading subunit.

    PubMed

    Wieczorek, Anna; McHenry, Charles S

    2006-05-01

    The alpha subunit of the replicase of all bacteria contains a php domain, initially identified by its similarity to histidinol phosphatase but of otherwise unknown function (Aravind, L., and Koonin, E. V. (1998) Nucleic Acids Res. 26, 3746-3752). Deletion of 60 residues from the NH2 terminus of the alpha php domain destroys epsilon binding. The minimal 255-residue php domain, estimated by sequence alignment with homolog YcdX, is insufficient for epsilon binding. However, a 320-residue segment including sequences that immediately precede the polymerase domain binds epsilon with the same affinity as the 1160-residue full-length alpha subunit. A subset of mutations of a conserved acidic residue (Asp43 in Escherichia coli alpha) present in the php domain of all bacterial replicases resulted in defects in epsilon binding. Using sequence alignments, we show that the prototypical gram+ Pol C, which contains the polymerase and proofreading activities within the same polypeptide chain, has an epsilon-like sequence inserted in a surface loop near the center of the homologous YcdX protein. These findings suggest that the php domain serves as a platform to enable coordination of proofreading and polymerase activities during chromosomal replication.

  13. Xylose reductase from the thermophilic fungus Talaromyces emersonii: cloning and heterologous expression of the native gene (Texr) and a double mutant (TexrK271R + N273D) with altered coenzyme specificity.

    PubMed

    Fernandes, Sara; Tuohy, Maria G; Murray, Patrick G

    2009-12-01

    Xylose reductase is involved in the first step of the fungal pentose catabolic pathway. The gene encoding xylose reductase (Texr) was isolated from the thermophilic fungus Talaromyces emersonii, expressed in Escherichia coli and purified to homogeneity. Texr encodes a 320 amino acid protein with a molecular weight of 36 kDa, which exhibited high sequence identity with other xylose reductase sequences and was shown to be a member of the aldoketoreductase (AKR) superfamily with a preference for reduced nicotinamide adenine dinucleotide phosphate (NADPH) as coenzyme. Given the potential application of xylose reductase enzymes that preferentially utilize the reduced form of nicotinamide adenine dinucleotide (NADH) rather than NADPH in the fermentation of five carbon sugars by genetically engineered microorganisms, the coenzyme selectivity of TeXR was altered by site-directed mutagenesis. The TeXR K271R+N273D double mutant displayed an altered coenzyme preference with a 16-fold improvement in NADH utilization relative to the wild type and therefore has the potential to reduce redox imbalance of xylose fermentation in recombinant S. cerevisiae strains. Expression of Texr was shown to be inducible by the same carbon sources responsible for the induction of genes encoding enzymes relevant to lignocellulose hydrolysis, suggesting a coordinated expression of intracellular and extracellular enzymes relevant to hydrolysis and metabolism of pentose sugars in T. emersonii in adaptation to its natural habitat. This indicates a potential advantage in survival and response to a nutrient-poor environment.

  14. Comparison of the membrane-filtration fluorescent antibody test, the enzyme-linked immunosorbent assay, and the polymerase chain reaction to detect Renibacterium salmoninarum in salmon ovarian fluid

    USGS Publications Warehouse

    Pascho, R.J.; Chase, D.; McKibben, C.L.

    1998-01-01

    Ovarian fluid samples from naturally infected chinook salmon (Oncorhynchus tshawytscha) were examined for the presence of Renibacterium salmoninarum by the membrane-filtration fluorescent antibody test (MF-FAT), an antigen capture enzyme-linked immunosorbent assay (ELISA), and a nested polymerase chain reaction (PCR). On the basis of the MF-FAT, 64% (66/103) samples contained detectable levels of R. salmoninarum cells. Among the positive fish, the R. salmoninarum concentrations ranged from 25 cells/ml to 4.3 3 109 cells/ml. A soluble antigenic fraction of R. salmoninarum was detected in 39% of the fish (40/103) by the ELISA. The ELISA is considered one of the most sensitive detection methods for bacterial kidney disease in tissues, yet it did not detect R. salmoninarum antigen consistently at bacterial cell concentrations below about 1.3 3 104 cells/ml according to the MF-FAT counts. When total DNA was extracted and tested in a nested PCR designed to amplify a 320-base-pair region of the gene encoding a soluble 57-kD protein of R. salmoninarum, 100% of the 100 samples tested were positive. The results provided strong evidence that R. salmoninarum may be present in ovarian fluids thought to be free of the bacterium on the basis of standard diagnostic methods.

  15. Data indicating temperature response of Ti–6Al–4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping

    PubMed Central

    Marshall, Garrett J.; Thompson, Scott M.; Shamsaei, Nima

    2016-01-01

    An OPTOMEC Laser Engineered Net Shaping (LENS™) 750 system was retrofitted with a melt pool pyrometer and in-chamber infrared (IR) camera for nondestructive thermal inspection of the blown-powder, direct laser deposition (DLD) process. Data indicative of temperature and heat transfer within the melt pool and heat affected zone atop a thin-walled structure of Ti–6Al–4V during its additive manufacture are provided. Melt pool temperature data were collected via the dual-wavelength pyrometer while the dynamic, bulk part temperature distribution was collected using the IR camera. Such data are provided in Comma Separated Values (CSV) file format, containing a 752×480 matrix and a 320×240 matrix of temperatures corresponding to individual pixels of the pyrometer and IR camera, respectively. The IR camera and pyrometer temperature data are provided in blackbody-calibrated, raw forms. Provided thermal data can aid in generating and refining process-property-performance relationships between laser manufacturing and its fabricated materials. PMID:27054180

  16. Genetic alterations for increased coumarin production lead to metabolic changes in the medicinally important Pelargonium sidoides DC (Geraniaceae).

    PubMed

    Colling, J; Groenewald, J-H; Makunga, N P

    2010-11-01

    The medicinal plant Pelargonium sidoides is fast becoming threatened due to the overharvest of its tubers from the wild to produce a phytopharmaceutical for treating respiratory infections. The action of the coumarins is implicated in the efficacy of the commercial herbal extract with the highly oxygenated coumarins exhibiting the best anti-bacterial and anti-viral activity. Through this work we aimed at exploring the metabolic effects of Agrobacterium rhizogenes transformation. After confirmation of transgenesis using PCR amplification of the rol A (320 bp), rol B (400 bp) and rol C (600 bp) genes, metabolite profiles indicated a high level of variability between the different transgenic clones but these had more compounds compared to non-transgenic control cultures. This was represented by a two- to four-fold increase in detected metabolites in transgenic clones. We quantified several commercially important coumarins, flavonoids and phenolic acids. One of the clones had six out of nine of these metabolites. Overall, the concentration of these metabolites of interest were significantly changed in transgenic root cultures, for instance shikimic acid was recorded at the highest level in clone A4T-A. Production of key metabolites at significantly higher concentrations due to transgenesis and positive anti-bacterial activity exhibited by transgenic roots lends support to the idea of developing these clones as an alternative source that will allow for sustainable access to economically valuable secondary compounds of P. sidoides.

  17. Ultraviolet radiation absorbing compounds in marine organisms

    SciTech Connect

    Chalker, B.E.; Dunlap, W.C. )

    1990-01-09

    Studies on the biological effects of solar ultraviolet radiations are becoming increasingly common, in part due to recent interest in the Antarctic ozone hole and in the perceived potential for global climate change. Marine organisms possess many strategies for ameliorating the potentially damaging effects of UV-B (280-320 nm) and the shorter wavelengths of UV-A (320-400nm). One mechanism is the synthesis of bioaccumulation of ultraviolet radiation absorbing compounds. Several investigators have noted the presence of absorbing compounds in spectrophotometer scans of extracts from a variety of marine organisms, particularly algae and coelenterates containing endosymbiotic algae. The absorbing compounds are often mycosporine-like amino acids. Thirteen mycosporine-like amino acids have already been described, and several others have recently been detected. Although, the mycosporine-like amino acids are widely distributed. these compounds are by no means the only type of UV-B absorbing compounds which has been identified. Coumarins from green algae, quinones from sponges, and indoles from a variety of sources are laternative examples which are documented in the natural products literature. When the biological impact of solar ultraviolet radiation is assessed, adequate attention must be devoted to the process of photoadaptation, including the accumulation of ultraviolet radiation absorbing compounds.

  18. [Evaluation of the impact on Aedes aegypti infestation in cement tanks of the municipal district of Canindé, Ceará, Brazil after using the Betta splendens fish as an alternative biological control].

    PubMed

    Pamplona, Luciano de Góes Cavalcanti; Lima, José Wellington de Oliveira; Cunha, Jane Cris de Lima; Santana, Eddie William de Pinho

    2004-01-01

    Canindé has a population of 71,235 inhabitants. In April 2001, the city started using larvivorous fish in cement water tanks, as a means of biological control of Aedes aegypti larvae. During house-to-house visits by health agents, instead of treating the water tank with larvicide, a Betta splendens fish was introduced into each tank. The number of houses and the number of tanks was estimated by monthly surveys. Then, the number of tanks per house was determined. Taking into account this estimated number and the number of houses visited, the infestation level for each kind of deposit was analyzed. In January 2001, 70.4% of the water tanks presented mosquitoes. Following the intervention, in January 2002 only 7.4% were positive and by December 2002 the rate had dropped to 0.2%. The efficacy of Betta splendens as a biological control agent in cement water tanks was clearly demonstrated, by achieving a 320 times reduction in the infestation level.

  19. The effects of ultraviolet radiation on growth and bleaching in three species of Hawaiian coral

    SciTech Connect

    Goodman, G.D. )

    1990-01-09

    Long term exposure to ultraviolet radiation is harmful to many organisms, including hermatypic corals, which obtain much of their nutrition from photosynthetic zooxanthellae. Therefore, increased UV radiation from atmospheric ozone depletion could inhibit growth of such corals. Moreover, coral bleaching, which has been attributed to loss of pigment and/or expulsion of zooxanthellae, may be a specific response to UV light. Does UV-A reduce skeletal growth or influence population density and pigment content of zooxanthellae In addition, do zooxanthellae migrate to shaded areas of the colony to avoid ultraviolet light Using alizarin red stain and suitable filters, I compared the stain and suitable filters, I compared the effects of UV-A (320-400nm) and full-spectrum UV (280-400nm) on the skeletal growth of two Hawaiian corals, Montipora verrucosa, Pocillopora damicornis, in situ. In the perforate corals, M. Verrucosa and Porites compressa, I measured concentration of zooxanthellae and their chlorophyll content to quantify bleaching in response to UV light. Reduction in skeletal growth by the two corals in response to different ranges of UV light appears to be species specific. Bleaching by UV appears to be characterized by an initial loss of pigment followed by the expulsion and migration of the zooxanthellae to shaded areas of the colony. Differences in tolerance and adaptation to decreasing ozone levels and increasing UV light should confer a competitive advantage on various species and morphologies of reef-building corals.

  20. Comparison of Diagnostic Accuracy of Radiation Dose-Equivalent Radiography, Multidetector Computed Tomography and Cone Beam Computed Tomography for Fractures of Adult Cadaveric Wrists

    PubMed Central

    Neubauer, Jakob; Benndorf, Matthias; Reidelbach, Carolin; Krauß, Tobias; Lampert, Florian; Zajonc, Horst; Kotter, Elmar; Langer, Mathias; Fiebich, Martin; Goerke, Sebastian M.

    2016-01-01

    Purpose To compare the diagnostic accuracy of radiography, to radiography equivalent dose multidetector computed tomography (RED-MDCT) and to radiography equivalent dose cone beam computed tomography (RED-CBCT) for wrist fractures. Methods As study subjects we obtained 10 cadaveric human hands from body donors. Distal radius, distal ulna and carpal bones (n = 100) were artificially fractured in random order in a controlled experimental setting. We performed radiation dose equivalent radiography (settings as in standard clinical care), RED-MDCT in a 320 row MDCT with single shot mode and RED-CBCT in a device dedicated to musculoskeletal imaging. Three raters independently evaluated the resulting images for fractures and the level of confidence for each finding. Gold standard was evaluated by consensus reading of a high-dose MDCT. Results Pooled sensitivity was higher in RED-MDCT with 0.89 and RED-MDCT with 0.81 compared to radiography with 0.54 (P = < .004). No significant differences were detected concerning the modalities’ specificities (with values between P = .98). Raters' confidence was higher in RED-MDCT and RED-CBCT compared to radiography (P < .001). Conclusion The diagnostic accuracy of RED-MDCT and RED-CBCT for wrist fractures proved to be similar and in some parts even higher compared to radiography. Readers are more confident in their reporting with the cross sectional modalities. Dose equivalent cross sectional computed tomography of the wrist could replace plain radiography for fracture diagnosis in the long run. PMID:27788215

  1. 320 Gb/s Nyquist OTDM received by polarization-insensitive time-domain OFT.

    PubMed

    Hu, H; Kong, D; Palushani, E; Galili, M; Mulvad, H C H; Oxenløwe, L K

    2014-01-13

    We have demonstrated the generation of a 320 Gb/s Nyquist-OTDM signal by rectangular filtering on an RZ-OTDM signal with the filter bandwidth (320 GHz) equal to the baud rate (320 Gbaud) and the reception of such a Nyquist-OTDM signal using polarization-insensitive time-domain optical Fourier transformation (TD-OFT) followed by passive filtering. After the time-to-frequency mapping in the TD-OFT, the Nyquist-OTDM signal with its characteristic sinc-shaped time-domain trace is converted into an orthogonal frequency division multiplexing (OFDM) signal with sinc-shaped spectra for each subcarrier. The subcarrier frequency spacing of the converted OFDM signal is designed to be larger than the transform-limited case, here 10 times greater than the symbol rate of each subcarrier. Therefore, only passive filtering is needed to extract the subcarriers of the converted OFDM signal. In addition, a polarization diversity scheme is used in the four-wave mixing (FWM) based TD-OFT, and less than 0.5 dB polarization sensitivity is demonstrated in the OTDM receiver.

  2. Operation and performance of the FAST detector at the AD machine

    NASA Astrophysics Data System (ADS)

    Mascagna, V.; Bolognini, D.; Corradini, M.; Leali, M.; Mozzanica, A.; Lodi Rizzini, E.; Prest, M.; Vallazza, E.; Venturelli, L.; Zurlo, N.

    2007-10-01

    The FAST (Fiber Antiproton Scintillating Tracker) detector has been installed at the Antiproton Decelerator at the CERN PS. Its goal is the measurement of the annihilation cross section of slow antiprotons (around 5 MeV) in gaseous targets in the ASACUSA experiment. FAST has to reconstruct the charged pions tracks to identify the annihilation vertices. The detector consists of 2 axial and 4 stereo layers of scintillating fibers. Each layer is built with 1 mm 50 cm long BCF-10 fibers readout by 64 channel multianode PMTs for a total of 2688 readout channels. The anode outputs, amplified and discriminated, are sampled with a 320 MHz clock inside a Cyclone II FPGA by Altera, in order to retrieve the time information of each hit. The readout system is designed to cope with a spilled beam which lasts 250 ns every minute. The expected number of events per spill was around 10. This paper will describe the operation and the performance of the FAST detector during the tests with cosmic rays (August 2006) and during the data taking on the beam (September 2006).

  3. A study of two unsupervised data driven statistical methodologies for detecting and classifying damages in structural health monitoring

    NASA Astrophysics Data System (ADS)

    Tibaduiza, D.-A.; Torres-Arredondo, M.-A.; Mujica, L. E.; Rodellar, J.; Fritzen, C.-P.

    2013-12-01

    This article is concerned with the practical use of Multiway Principal Component Analysis (MPCA), Discrete Wavelet Transform (DWT), Squared Prediction Error (SPE) measures and Self-Organizing Maps (SOM) to detect and classify damages in mechanical structures. The formalism is based on a distributed piezoelectric active sensor network for the excitation and detection of structural dynamic responses. Statistical models are built using PCA when the structure is known to be healthy either directly from the dynamic responses or from wavelet coefficients at different scales representing Time-frequency information. Different damages on the tested structures are simulated by adding masses at different positions. The data from the structure in different states (damaged or not) are then projected into the different principal component models by each actuator in order to obtain the input feature vectors for a SOM from the scores and the SPE measures. An aircraft fuselage from an Airbus A320 and a multi-layered carbon fiber reinforced plastic (CFRP) plate are used as examples to test the approaches. Results are presented, compared and discussed in order to determine their potential in structural health monitoring. These results showed that all the simulated damages were detectable and the selected features proved capable of separating all damage conditions from the undamaged state for both approaches.

  4. Bed-scale selective diagenesis in the Anastasia Formation, East Coast of Florida

    SciTech Connect

    Missimer, T.M.; McNeill, D.F. . Rosenstiel School of Marine and Atmospheric Science)

    1992-01-01

    Successive beds of cemented and uncemented sediment within the Anastasia Formation appear to have formed as beachrock on a prograding shoreline. The Late Pleistocene age Anastasia Formation, a mixed carbonate/clastic formation located along a 320 km length of the Florida East Coast, contains numerous examples of bed-scale, selective cementation apparently unrelated to depositional fabric differences. Bed thickness ranges from 10 to 50 cm in the alternating sequences. Petrographic examination of the cemented sediments shows mostly low Mg blocky and dogtooth spar calcite cements. Both the composition and cementation indicate meteoric diagenesis in mostly the vadose zone. A few pores contain some fibrous aragonite cement and a small quantity of high Mg calcite cement occurs. Several generations of cement occur in the rock and it appears that former aragonitic boytroids or high Mg cement areas have been replaced by low Mg calcite. Based on the fact that the original depositional environment was shallow marine or beach and some evidence for original marine cementation is present, it is concluded that the alternating bed-selective cementation in the Anastasia Formation was controlled by tidal sedimentation and cementation as beachrock. Removal of the meta-stable marine cement and an overprint with several generations of vadose cement masked the original diagenetic history of the rock.

  5. Spatial scanning for anomaly detection in acoustic emission testing of an aerospace structure

    NASA Astrophysics Data System (ADS)

    Hensman, James; Worden, Keith; Eaton, Mark; Pullin, Rhys; Holford, Karen; Evans, Sam

    2011-10-01

    Acoustic emission (AE) monitoring of engineering structures potentially provides a convenient, cost-effective means of performing structural health monitoring. Networks of AE sensors can be easily and unobtrusively installed upon structures, giving the ability to detect and locate damage-related strain releases ('events') in the structure. Use of the technique is not widespread due to the lack of a simple and effective method for detecting abnormal activity levels: the sensitivity of AE sensor networks is such that events unrelated to damage are prevalent in most applications. In this publication, we propose to monitor AE activity in a structure using a spatial scanning statistic, developed and used effectively in the field of epidemiology. The technique is demonstrated on an aerospace structure - an Airbus A320 main landing gear fitting - undergoing fatigue loading, and the method is compared to existing techniques. Despite its simplicity, the scanning statistic proves to be an extremely effective tool in detecting the onset of damage in the structure: it requires little to no user intervention or expertise, is inexpensive to compute and has an easily interpretable output. Furthermore, the generic nature of the method allows the technique to be used in a variety of monitoring scenarios, to detect damage in a wide range of structures.

  6. Development of a nested polymerase chain reaction for amplification of a sequence of the p57 gene of Renibacterium salmoninarum that provides a highly sensitive method for detection of the bacterium in salmonid kidney

    USGS Publications Warehouse

    Chase, D.M.; Pascho, R.J.

    1998-01-01

    Nucleic acid-based assays have shown promise for diagnosing Renibacterium salmoninarum in tissues and body fluids of salmonids. DeVelopment of a nested polymerase chain reaction (PCR) method to detect a 320 bp DNA segment of the gene encoding the p57 protein of R. salmoninarum is described. Whereas a conventional PCR for a 383 bp segment of the p57 gene reliably detected 1000 R. salmoninarum cells per reaction in kidney tissue, the nested PCR detected as few as 10 R. salmoninarum per reaction in kidney tissue. Two DNA extraction methods for the nested PCR were compared and the correlation between replicate samples was generally higher in samples extracted by the QIAamp system compared with those extracted by the phenol/chloroform method. The specificity of the nested PCR was confirmed by testing DNA extracts of common bacterial fish pathogens and a panel of bacterial species reported to cause false-positive reactions in the enzyme-linked immunosorbent assay (ELISA) and the fluorescent antibody test (FAT) for R. salmoninarum. Kidney samples from 74 naturally infected chinook Salmon were examined by the nested PCR, the ELISA, and the FAT, and the detected prevalences of R. salmoninarum were 61, 47, and 43%, respectively.

  7. Molecular screening in galactosemia

    SciTech Connect

    Elsas, L.J.; Singh, R.; Fernhoff, P.M.

    1994-09-01

    Classical galactosemia (G/G) is caused by the absence of galactose-1-phosphate uridyl transferase (GALT) activity while the Duarte allele produces partial impairment and a specific biochemical phenotype. Cloning and sequencing of the human GALT gene has enabled the identification of prevalent mutations for both Classical and Duarte alleles. The G allele is caused by a Q188R codon mutation in exon 6 in 70% of a Caucasian population while the D allele is caused by an N134D codon mutation in exon 10. Since the Q188R sequence creates a new Hpa II site and the N314D sequence creates a new Sin I site, it is relatively easy to screen for both mutations by multiplex PCR and restriction digest. Here we describe a method for detection of new mutations producing impaired GALT. Patient DNAs are subjected to SSCP (single strand conformational polymorphism) analysis of their 11 GALT exons. Direct sequencing of the exons targeted by SSCP has revealed many codon changes: IVSC 956 (a splice acceptor site loss), S135L, V151A, E203K, A320T, and Y323D. Two of these codon changes, V151A and S135L, have been confirmed as mutations by finding impaired GALT activity in a yeast expression system. We conclude that molecular screening of GALT DNA will clarify the structural biology of GALT and the pathophysiology of galactosemia.

  8. Treatment of Dentine Hypersensitivity by Diode Laser: A Clinical Study

    PubMed Central

    Umberto, Romeo; Claudia, Russo; Gaspare, Palaia; Gianluca, Tenore; Alessandro, Del Vecchio

    2012-01-01

    Introduction. Dentine hypersensitivity (DH) is characterized by pain after stimuli that usually provoke no symptoms. This study compared the effectiveness of GaAlAs diode laser alone and with topical sodium fluoride gel (NaF). Materials and Methods. The study was conducted on 10 patients (8 F/2 M, age 25–60) and 115 teeth with DH assessed by air and tactile stimuli measured by Numeric Rating Scale (NRS). Teeth were randomly divided into G1 (34 teeth) treated by 1.25% NaF; G2 (33 teeth) lased at 0.5 W PW (T on 100 m and T off 100 ms), fluence 62.2 J/cm2 in defocused mode with a 320 μ fiber. Each tooth received three 1′ applications; G3 (48 teeth) received NaF gel plus laser at same G2 parameters. NRS was checked at each control. Results. Significant pain reduction was showed. The NRS reduction percentages were calculated, and there was a concrete decrease of DH above all in G3 than G2 and G1. Conclusion. Diode laser is a useful device for DH treatment if used alone and mainly if used with NaF gel. PMID:22792109

  9. Hydrogen production through aqueous-phase reforming of ethylene glycol in a washcoated microchannel.

    PubMed

    D'Angelo, M Fernanda Neira; Ordomsky, Vitaly; Paunovic, Violeta; van der Schaaf, John; Schouten, Jaap C; Nijhuis, T Alexander

    2013-09-01

    Aqueous-phase reforming (APR) of biocarbohydrates is conducted in a catalytically stable washcoated microreactor where multiphase hydrogen removal enhances hydrogen efficiency. Single microchannel experiments are conducted following a simplified model based on the microreactor concept. A coating method to deposit a Pt-based catalyst on the microchannel walls is selected and optimized. APR reactivity tests are performed by using ethylene glycol as the model compound. Optimum results are achieved with a static washcoating technique; a highly uniform and well adhered 5 μm layer is deposited on the walls of a 320 μm internal diameter (ID) microchannel in one single step. During APR of ethylene glycol, the catalyst layer exhibits high stability over 10 days after limited initial deactivation. The microchannel presents higher conversion and selectivity to hydrogen than a fixed-bed reactor. The benefits of using a microreactor for APR can be further enhanced by utilizing increased Pt loadings, higher reaction temperatures, and larger carbohydrates (e.g., glucose). The use of microtechnology for aqueous-phase reforming will allow for a great reduction in the reformer size, thus rendering it promising for distributed hydrogen production. PMID:23592593

  10. Prepare for Landing

    NASA Astrophysics Data System (ADS)

    DiLisi, Gregory A.; Rarick, Richard A.

    2007-05-01

    The 2006 Winter Meeting of the AAPT Was Over … and the flight home from Anchorage to Cleveland was just about to end—eight hours in the air, only two complimentary beverages, no meals, a jump across four time zones, a one-year-old baby daughter, and a wife whose motto for the week was, "Why did they choose to have a winter meeting in Alaska?" made for a mentally and physically taxing airborne ordeal. As we entered the last hour of flight, my small family was exhausted and the pilot's decision to dim the interior cabin lights mixed with the soothing hum of the Airbus® A320's engines quickly put us to sleep. Fading in and out of my delirium, I eventually heard the pilot's voice crackle over the intercom with a seemingly innocent comment: "We are going to begin our final descent into Cleveland … we should have you on the ground in exactly eight minutes." Something about the pilot's use of the word "exactly" must have triggered a reaction in my brain, because his remarks initiated a series of calculations: So how fast are we flying? How high are we flying? What's our angle of descent? With only eight minutes until touchdown, my curiosity to determine the descending airplane's motion led me to conduct a hastily constructed experiment.

  11. Shear bond strength of seventh generation bonding agents on dentin of primary teeth--an in vitro study.

    PubMed

    Gonzalez, Geoffrey; Rich, Alfred P; Finkelman, Matthew D; Defuria, Catherine

    2012-01-01

    This controlled, randomized, in vitro study evaluated the shear bond strength of several seventh generation bonding agents on the dentin of primary teeth. Six different adhesives were used: Xeno IV, Clearfil S3 Bond, Adper Prompt-L-Pop, AdheSE One, Bond Force, and Optibond (control). Ninety primary teeth were prepared by wet grinding with a 320-grit silicon carbide paper on a polishing wheel running at 110 RPM. After 24 hours of storage in water, shear bond strengths of each group were determined. The mean shear bond strength of the tested adhesive systems to primary dentin was 12.27 MPa. One-way ANOVA testing showed a statistically significant difference between adhesive products (P < 0.001). Tukey HSD post hoc tests were used to assess which means were significantly different from one another. There was no statistically significant difference between the fifth generation adhesive system (Optibond) and the two seventh generation systems (Xeno IV and Bond Force), with Optibond exhibiting a lower mean shear bond strength compared to Bond Force. Within the limitations of this study, there is a significant difference between seventh generation bonding materials. Bond Force and Optibond appear to exhibit higher shear bond strengths than the other products.

  12. Magnetic levitation assisted aircraft take-off and landing (feasibility study - GABRIEL concept)

    NASA Astrophysics Data System (ADS)

    Rohacs, Daniel; Rohacs, Jozsef

    2016-08-01

    The Technology Roadmap 2013 developed by the International Air Transport Association envisions the option of flying without an undercarriage to be in operation by 2032. Preliminary investigations clearly indicate that magnetic levitation technology (MagLev) might be an appealing solution to assist the aircraft take-off and landing. The EU supported research project, abbreviated as GABRIEL, was dealing with (i) the concept development, (ii) the identification, evaluation and selection of the deployable magnetic levitation technology, (iii) the definition of the core system elements (including the required aircraft modifications, the ground-based system and airport elements, and the rendezvous control system), (iv) the analysis of the safety and security aspects, (v) the concept validation and (vi) the estimation of the proposed concept impact in terms of aircraft weight, noise, emission, cost-benefit). All results introduced here are compared to a medium size hypothetic passenger aircraft (identical with an Airbus A320). This paper gives a systematic overview of (i) the applied methods, (ii) the investigation of the possible use of magnetic levitation technology to assist the commercial aircraft take-off and landing processes and (iii) the demonstrations, validations showing the feasibility of the radically new concept. All major results are outlined.

  13. Engine Concept Study for an Advanced Single-Aisle Transport

    NASA Technical Reports Server (NTRS)

    Guynn, Mark D.; Berton, Jeffrey J.; Fisher, Kenneth L.; Haller, William J.; Tong, Michael; Thurman, Douglas R.

    2009-01-01

    The desire for higher engine efficiency has resulted in the evolution of aircraft gas turbine engines from turbojets, to low bypass ratio, first generation turbofans, to today's high bypass ratio turbofans. Although increased bypass ratio has clear benefits in terms of propulsion system metrics such as specific fuel consumption, these benefits may not translate into aircraft system level benefits due to integration penalties. In this study, the design trade space for advanced turbofan engines applied to a single aisle transport (737/A320 class aircraft) is explored. The benefits of increased bypass ratio and associated enabling technologies such as geared fan drive are found to depend on the primary metrics of interest. For example, bypass ratios at which mission fuel consumption is minimized may not require geared fan technology. However, geared fan drive does enable higher bypass ratio designs which result in lower noise. The results of this study indicate the potential for the advanced aircraft to realize substantial improvements in fuel efficiency, emissions, and noise compared to the current vehicles in this size class.

  14. Automated exterior inspection of an aircraft with a pan-tilt-zoom camera mounted on a mobile robot

    NASA Astrophysics Data System (ADS)

    Jovančević, Igor; Larnier, Stanislas; Orteu, Jean-José; Sentenac, Thierry

    2015-11-01

    This paper deals with an automated preflight aircraft inspection using a pan-tilt-zoom camera mounted on a mobile robot moving autonomously around the aircraft. The general topic is image processing framework for detection and exterior inspection of different types of items, such as closed or unlatched door, mechanical defect on the engine, the integrity of the empennage, or damage caused by impacts or cracks. The detection step allows to focus on the regions of interest and point the camera toward the item to be checked. It is based on the detection of regular shapes, such as rounded corner rectangles, circles, and ellipses. The inspection task relies on clues, such as uniformity of isolated image regions, convexity of segmented shapes, and periodicity of the image intensity signal. The approach is applied to the inspection of four items of Airbus A320: oxygen bay handle, air-inlet vent, static ports, and fan blades. The results are promising and demonstrate the feasibility of an automated exterior inspection.

  15. User type certification for advanced flight control systems

    NASA Technical Reports Server (NTRS)

    Gilson, Richard D.; Abbott, David W.

    1994-01-01

    Advanced avionics through flight management systems (FMS) coupled with autopilots can now precisely control aircraft from takeoff to landing. Clearly, this has been the most important improvement in aircraft since the jet engine. Regardless of the eventual capabilities of this technology, it is doubtful that society will soon accept pilotless airliners with the same aplomb they accept driverless passenger trains. Flight crews are still needed to deal with inputing clearances, taxiing, in-flight rerouting, unexpected weather decisions, and emergencies; yet it is well known that the contribution of human errors far exceed those of current hardware or software systems. Thus human errors remain, and are even increasing in percentage as the largest contributor to total system error. Currently, the flight crew is regulated by a layered system of certification: by operation, e.g., airline transport pilot versus private pilot; by category, e.g., airplane versus helicopter; by class, e.g., single engine land versus multi-engine land; and by type (for larger aircraft and jet powered aircraft), e.g., Boeing 767 or Airbus A320. Nothing in the certification process now requires an in-depth proficiency with specific types of avionics systems despite their prominent role in aircraft control and guidance.

  16. Investigating the Electrical Resistivity Structure at the Creeping Segment of the North Anatolian Fault near Ismetpasa by Wide-band Magnetotellurics

    NASA Astrophysics Data System (ADS)

    Tank, Bülent; Kandemir, Özgür; Akbayram, Kenan; Kanar, Fatih; Öztay, Erkan; Rıza Kılıç, Ali; Bakar, Levent; Tok, Turgut; Çobankaya, Mehmet; Aylan, Eşref; Karabulut, Gamze; Paker, Ercan

    2016-04-01

    More than hundred wide-band (360 Hz - 2000 sec.) magnetotelluric (MT) observations were performed and were utilized to decipher the electrical resistivity structure in two- and three- dimensions along a 320 km, northwest - southeast aligned profile that cuts through the Gerede - Ismetpasa segment of the North Anatolian Fault. Even though Gerede - Ismetpasa region has accommodated 1944, Gerede (Mw=7.2) and 1951, Kursunlu (Mw=6.9) events, seismically, this segment is considered as a relatively quiet portion of the North Anatolian Fault and is well known with its creeping behavior (approx. 7.6 mm/yr). In this study the aim is to compare electrical resistivity structure with the creep information. Several modeling attempts targeting different depths and portions of the profile were made for imaging different problems. Preliminary three-dimensional models that were developed by WSINV3DMT suggest that; (i) There is significant and deep extending fault zone conductor that might be related with the creeping segment and (ii) In the deeper levels high and low conductivity interfaces are present in and around the fault region, which might be related to the North Anatolian Fault and seldom earthquake activity.

  17. Manual Throttles-Only Control Effectivity for Emergency Flight Control of Transport Aircraft

    NASA Technical Reports Server (NTRS)

    Stevens, Richard; Burcham, Frank W., Jr.

    2009-01-01

    If normal aircraft flight controls are lost, emergency flight control may be attempted using only the thrust of engines. Collective thrust is used to control flightpath, and differential thrust is used to control bank angle. One issue is whether a total loss of hydraulics (TLOH) leaves an airplane in a recoverable condition. Recoverability is a function of airspeed, altitude, flight phase, and configuration. If the airplane can be recovered, flight test and simulation results on several transport-class airplanes have shown that throttles-only control (TOC) is usually adequate to maintain up-and-away flight, but executing a safe landing is very difficult. There are favorable aircraft configurations, and also techniques that will improve recoverability and control and increase the chances of a survivable landing. The DHS and NASA have recently conducted a flight and simulator study to determine the effectivity of manual throttles-only control as a way to recover and safely land a range of transport airplanes. This paper discusses TLOH recoverability as a function of conditions, and TOC landability results for a range of transport airplanes, and some key techniques for flying with throttles and making a survivable landing. Airplanes evaluated include the B-747, B-767, B-777, B-757, A320, and B-737 airplanes.

  18. Photochemical Chlorine Activation From Artificial Saline Snowpacks

    NASA Astrophysics Data System (ADS)

    Wren, S. N.; Abbatt, J.; Donaldson, J.

    2012-12-01

    Halogen activation on snow and ice substrates has a profound influence on the oxidative capacity of the polar boundary layer. The release of reactive chlorine species is of particular interest since chlorine atoms can participate in both ozone depletion and organic oxidation. However, the mechanisms by which halides in sea ice substrates are converted into reactive halogen species are not well understood. In this study we investigated the photochemical activation of chlorine from artificial saline snow. Gas phase Cl2, BrCl and Br2 were detected using a chemical ionization mass spectrometer. We observe the dark release of Br2 in the presence of ozone; BrCl and Cl2 are only observed in the presence of both ozone and light. Interestingly, the release of reactive chlorine species persists when a 320 nm or a 380 nm long-pass filter is placed in the light path. Results suggest that smaller snow grains, which present a larger total snow surface area, enhance chlorine production to a greater extent than BrCl or Br2 production. Here we also present the effect of temperature (above and below the NaCl euctectic), acidity, chloride concentration, and ozone concentration on the production of Br2, BrCl and Cl2. Overall the results indicate that a mechanism involving UV-A light and ozone leads to chlorine activation, which may be particularly important in bromide-depleted snow.

  19. Enhancement of Real-Time THz Imaging System Based on 320 × 240 Uncooled Microbolometer Detector

    NASA Astrophysics Data System (ADS)

    Zheng, Xing; Wu, Zhiming; Gou, Jun; Liu, Ziji; Wang, Jun; Zheng, Jie; Luo, Zhenfei; Chen, Weiqing; Que, Longcheng; Jiang, Yadong

    2016-10-01

    A real-time terahertz (THz) imaging system was demonstrated based on a 320 × 240 uncooled microbolometer detector combined with a 2.52 THz far-infrared CO2 laser. On the top of micro-bridge structure (35 × 35 μm2), a 10 nm nickel-chromium (NiCr) thin film was deposited to enhance THz absorption, which was fabricated by a combined process of magnetron sputtering and reactive ion etching (RIE). By mechanical simulation using design of experiment (DOE) method, the minimum deformation was optimized to 0.0385 μm, and a measured deformation of 0.097 μm was achieved in the fabrication. The fabricated micro-bridge pixel was used for THz detection, and a responsivity of 1235 V/W was achieved with a noise equivalent power (NEP) of 87.4 pW/Hz1/2. THz imaging of metal gasket covered by label paper, paper clip in an envelope, and watermark of a banknote was demonstrated by a combination of histogram equalization (HE) and linear enhancement algorithm.

  20. Crustal structure of accreted terranes in southern Alaska, Chugach Mountains and Copper River Basin, from seismic refraction results

    USGS Publications Warehouse

    Fuis, G.S.; Ambos, E.L.; Mooney, W.D.; Christensen, N.I.; Geist, E.

    1991-01-01

    Seismic refraction data were collected along a 320-km-long "transect' line in southern Alaska, crossing the Prince William, Chugach, Peninsular, and Wrangellia terranes, and along several shorter lines within individual terranes. Velocity structure in the upper crust (less than 9-km depth) differs among the four terranes. In contrast, layers in the middle crust (9- to 25-km depth) in some case extend across projected terrane boundaries. The top of a gently north dipping sequence of low- and high-velocity layers (5.7-7.8 km/s), more than 10 km thick, extends from near the surface in the southern Chugach terrane to more than 20-km depth beneath the southern Peninsular terrane. This sequence, truncated by the suture between the Prince William and Chugach terranes, is interpreted to be an underplated "terrane' made up of fragments of the Kula plate and its sedimentary overburden that were accreted during subduction in the late Mesozoic and/or early Tertiary, during or between times of accretion of the Prince William and Chugach terranes. -from Authors

  1. Molecular responses to photogenotoxic stress induced by the antibiotic lomefloxacin in human skin cells: from DNA damage to apoptosis.

    PubMed

    Marrot, Laurent; Belaïdi, Jean Phillipe; Jones, Christophe; Perez, Phillipe; Riou, Lydia; Sarasin, Alain; Meunier, Jean Roch

    2003-09-01

    Photo-unstable chemicals sometimes behave as phototoxins in skin, inducing untoward clinical side-effects when exposed to sunlight. Some drugs, such as psoralens or fluoroquinolones, can damage genomic DNA, thus increasing the risk of photocarcinogenesis. Here, lomefloxacin, an antibiotic from the fluoroquinolone family known to be involved in skin tumor development in photoexposed mice, was studied using normal human skin cells in culture: fibroblasts, keratinocytes, and Caucasian melanocytes. When treated cells were exposed to simulated solar ultraviolet A (320-400 nm), lomefloxacin induced damage such as strand breaks and pyrimidine dimers in genomic DNA. Lomefloxacin also triggered various stress responses: heme-oxygenase-1 expression in fibroblasts, changes in p53 status as shown by the accumulation of p53 and p21 proteins or the induction of MDM2 and GADD45 genes, and stimulation of melanogenesis by increasing the tyrosinase activity in melanocytes. Lomefloxacin could also lead to apoptosis in keratinocytes exposed to ultraviolet A: caspase-3 was activated and FAS-L gene was induced. Moreover, keratinocytes were shown to be the most sensitive cell type to lomefloxacin phototoxic effects, in spite of the well-established effectiveness of their antioxidant equipment. These data show that the phototoxicity of a given drug can be driven by different mechanisms and that its biologic impact varies according to cell type.

  2. Active three-dimensional and thermal imaging with a 30-μm pitch 320×256 HgCdTe avalanche photodiode focal plane array

    NASA Astrophysics Data System (ADS)

    de Borniol, Eric; Rothman, Johan; Guellec, Fabrice; Vojetta, Gautier; Destéfanis, Gérard; Pacaud, Olivier

    2012-06-01

    Three-dimensional (3-D) flash light detection and ranging (LADAR) imaging is based on time of flight (TOF) measurement of a single laser pulse. The laser pulse coming back from the observed object will be detected only if the number of photons received by each pixel generates a signal greater than the pixel noise. In order to extract this weak photonic signal from the noise we use the high gain and low excess noise of the HgCdTe avalanche photodiode (APD) arrays developed at CEA/LETI. The sensor consists of a 30-μm pitch APD detector array hybridized to a 320×256 pixels ROIC for passive and active imaging. In passive mode the focal plane array behaves like a thermal imager and we measured 30 mK of noise-equivalent temperature difference. In active imaging mode, each pixel sensed the time of flight and the intensity two-dimensional (2-D) of a single laser pulse. Laboratory tests show a range noise of 11 cm for 4300 photoelectrons per pixel and detection limit under 100 photoelectrons. The sensor was also used during a field trial to record 2-D and 3-D real-time videos. The quality of the images obtained demonstrates the maturity of HgCdTe-APD-array technology.

  3. Analysis of Turbofan Design Options for an Advanced Single-Aisle Transport Aircraft

    NASA Technical Reports Server (NTRS)

    Guynn, Mark D.; Berton, Jeffrey J.; Fisher, Kenneth L.; Haller, William J.; Tong, Michael T.; Thurman, Douglas R.

    2009-01-01

    The desire for higher engine efficiency has resulted in the evolution of aircraft gas turbine engines from turbojets, to low bypass ratio, first generation turbofans, to today's high bypass ratio turbofans. It is possible that future designs will continue this trend, leading to very-high or ultra-high bypass ratio (UHB) engines. Although increased bypass ratio has clear benefits in terms of propulsion system metrics such as specific fuel consumption, these benefits may not translate into aircraft system level benefits due to integration penalties. In this study, the design trade space for advanced turbofan engines applied to a single-aisle transport (737/A320 class aircraft) is explored. The benefits of increased bypass ratio and associated enabling technologies such as geared fan drive are found to depend on the primary metrics of interest. For example, bypass ratios at which fuel consumption is minimized may not require geared fan technology. However, geared fan drive does enable higher bypass ratio designs which result in lower noise. Regardless of the engine architecture chosen, the results of this study indicate the potential for the advanced aircraft to realize substantial improvements in fuel efficiency, emissions, and noise compared to the current vehicles in this size class.

  4. Refined Exploration of Turbofan Design Options for an Advanced Single-Aisle Transport

    NASA Technical Reports Server (NTRS)

    Guynn, Mark D.; Berton, Jeffrey J.; Fisher, Kenneth L.; Haller, William J.; Tong, Michael T.; Thurman, Douglas R.

    2011-01-01

    A comprehensive exploration of the turbofan engine design space for an advanced technology single-aisle transport (737/A320 class aircraft) was conducted previously by the authors and is documented in a prior report. Through the course of that study and in a subsequent evaluation of the approach and results, a number of enhancements to the engine design ground rules and assumptions were identified. A follow-on effort was initiated to investigate the impacts of these changes on the original study results. The fundamental conclusions of the prior study were found to still be valid with the revised engine designs. The most significant impact of the design changes was a reduction in the aircraft weight and block fuel penalties incurred with low fan pressure ratio, ultra-high bypass ratio designs. This enables lower noise levels to be pursued (through lower fan pressure ratio) with minor negative impacts on aircraft weight and fuel efficiency. Regardless of the engine design selected, the results of this study indicate the potential for the advanced aircraft to realize substantial improvements in fuel efficiency, emissions, and noise compared to the current vehicles in this size class.

  5. Secure thermal infrared communications using engineered blackbody radiation

    PubMed Central

    Liang, Xiaoxin; Hu, Fangjing; Yan, Yuepeng; Lucyszyn, Stepan

    2014-01-01

    The thermal (emitted) infrared frequency bands, from 20–40 THz and 60–100 THz, are best known for applications in thermography. This underused and unregulated part of the spectral range offers opportunities for the development of secure communications. The ‘THz Torch' concept was recently presented by the authors. This technology fundamentally exploits engineered blackbody radiation, by partitioning thermally-generated spectral noise power into pre-defined frequency channels; the energy in each channel is then independently pulsed modulated and multiplexing schemes are introduced to create a robust form of short-range secure communications in the far/mid infrared. To date, octave bandwidth (25–50 THz) single-channel links have been demonstrated with 380 bps speeds. Multi-channel ‘THz Torch' frequency division multiplexing (FDM) and frequency-hopping spread-spectrum (FHSS) schemes have been proposed, but only a slow 40 bps FDM scheme has been demonstrated experimentally. Here, we report a much faster 1,280 bps FDM implementation. In addition, an experimental proof-of-concept FHSS scheme is demonstrated for the first time, having a 320 bps data rate. With both 4-channel multiplexing schemes, measured bit error rates (BERs) of < 10−6 are achieved over a distance of 2.5 cm. Our approach represents a new paradigm in the way niche secure communications can be established over short links. PMID:24912871

  6. Secure thermal infrared communications using engineered blackbody radiation

    NASA Astrophysics Data System (ADS)

    Liang, Xiaoxin; Hu, Fangjing; Yan, Yuepeng; Lucyszyn, Stepan

    2014-06-01

    The thermal (emitted) infrared frequency bands, from 20-40 THz and 60-100 THz, are best known for applications in thermography. This underused and unregulated part of the spectral range offers opportunities for the development of secure communications. The `THz Torch' concept was recently presented by the authors. This technology fundamentally exploits engineered blackbody radiation, by partitioning thermally-generated spectral noise power into pre-defined frequency channels; the energy in each channel is then independently pulsed modulated and multiplexing schemes are introduced to create a robust form of short-range secure communications in the far/mid infrared. To date, octave bandwidth (25-50 THz) single-channel links have been demonstrated with 380 bps speeds. Multi-channel `THz Torch' frequency division multiplexing (FDM) and frequency-hopping spread-spectrum (FHSS) schemes have been proposed, but only a slow 40 bps FDM scheme has been demonstrated experimentally. Here, we report a much faster 1,280 bps FDM implementation. In addition, an experimental proof-of-concept FHSS scheme is demonstrated for the first time, having a 320 bps data rate. With both 4-channel multiplexing schemes, measured bit error rates (BERs) of < 10-6 are achieved over a distance of 2.5 cm. Our approach represents a new paradigm in the way niche secure communications can be established over short links.

  7. Secure thermal infrared communications using engineered blackbody radiation.

    PubMed

    Liang, Xiaoxin; Hu, Fangjing; Yan, Yuepeng; Lucyszyn, Stepan

    2014-01-01

    The thermal (emitted) infrared frequency bands, from 20-40 THz and 60-100 THz, are best known for applications in thermography. This underused and unregulated part of the spectral range offers opportunities for the development of secure communications. The 'THz Torch' concept was recently presented by the authors. This technology fundamentally exploits engineered blackbody radiation, by partitioning thermally-generated spectral noise power into pre-defined frequency channels; the energy in each channel is then independently pulsed modulated and multiplexing schemes are introduced to create a robust form of short-range secure communications in the far/mid infrared. To date, octave bandwidth (25-50 THz) single-channel links have been demonstrated with 380 bps speeds. Multi-channel 'THz Torch' frequency division multiplexing (FDM) and frequency-hopping spread-spectrum (FHSS) schemes have been proposed, but only a slow 40 bps FDM scheme has been demonstrated experimentally. Here, we report a much faster 1,280 bps FDM implementation. In addition, an experimental proof-of-concept FHSS scheme is demonstrated for the first time, having a 320 bps data rate. With both 4-channel multiplexing schemes, measured bit error rates (BERs) of < 10(-6) are achieved over a distance of 2.5 cm. Our approach represents a new paradigm in the way niche secure communications can be established over short links. PMID:24912871

  8. Heat loss analysis of a 10 kA warm dielectric HTS DC cable

    NASA Astrophysics Data System (ADS)

    Dai, Shaotao; Xiao, Liye; Teng, Yuping; Song, Naihao; Gao, Zhiyuan; Zhu, Zhiqing; Liang, Xueming; Cao, Zhicheng; Zhang, Dong; Ma, Tao; Zhang, Hongen; Lin, Liangzhen

    2014-09-01

    A 10 kA/360 m warm-dielectric high-temperature superconducting direct current (DC) power cable system (10 kA cable), supported jointly the Chinese government and industrial enterprise, was developed and has been operating as a branch circuit to transmit power for a 320 kA aluminum electrolyzing production line for more than 10 months at an industrial plant in central China. Both the 10 kA cable and its supporting system of the cable system are introduced. The cryogenic system for the 10 kA cable adopts closed loop and the sub-cooled liquid nitrogen is forced to flow inside by a pump. The design of corrugated cryogenic envelope pipe is modularized and every independent module has two standardized joints, which makes it easy to integrate with the other pipes and the terminations. The heat loss sources and the structure including both the termination and the cryogenic envelope pipe of the 10 kA cable are discussed. The total heat loss of the 10 kA cable excluding the loss of cryogenic pipe for liquid nitrogen backward flowing is designed to be less than 1698 W at 10 kA, and the heat loss was compared and discussed with that of the aluminum bar. The field test and commissioning of the cable show that the 10 kA cable performs steadily and its heat loss is less than the expected value.

  9. Rapid thinning of the Welsh Ice Cap at 20-19 ka based on 10Be ages

    NASA Astrophysics Data System (ADS)

    Hughes, Philip D.; Glasser, Neil F.; Fink, David

    2016-01-01

    New 10Be ages from the summits of three mountain areas of North Wales reveal a very similar exposure timing as the Welsh Ice Cap thinned after the global Last Glacial Maximum. Eight bedrock and one boulder sample gave a combined arithmetic mean exposure age of 19.08 ± 0.80 ka (4.2%, 1σ). Similar exposure ages over a 320 m vertical range (824 to 581 m altitude) show that ice cap thinning was very rapid and spatially uniform. Using the same production rate and scaling scheme, we recalculated six published 10Be exposure ages from the nearby Arans, which also covered a similar elevation range from 608 to 901 m and obtained an arithmetic mean of 19.41 ± 1.45 ka (7.5%, 1σ). The average exposure age of all 15 accepted deglaciation ages is 19.21 ± 1.07 (5.6%, 1σ). The complete dataset from North Wales provides very strong evidence indicating that these summits became exposed as nunataks at 20-19 ka. This result provides important insight to the magnitude of ice surface lowering and behavior of the Welsh Ice Cap during the last deglaciation that can be compared to other ice masses that made up the British-Irish Ice Sheet.

  10. Multi-Objective Optimization of a Turbofan for an Advanced, Single-Aisle Transport

    NASA Technical Reports Server (NTRS)

    Berton, Jeffrey J.; Guynn, Mark D.

    2012-01-01

    Considerable interest surrounds the design of the next generation of single-aisle commercial transports in the Boeing 737 and Airbus A320 class. Aircraft designers will depend on advanced, next-generation turbofan engines to power these airplanes. The focus of this study is to apply single- and multi-objective optimization algorithms to the conceptual design of ultrahigh bypass turbofan engines for this class of aircraft, using NASA s Subsonic Fixed Wing Project metrics as multidisciplinary objectives for optimization. The independent design variables investigated include three continuous variables: sea level static thrust, wing reference area, and aerodynamic design point fan pressure ratio, and four discrete variables: overall pressure ratio, fan drive system architecture (i.e., direct- or gear-driven), bypass nozzle architecture (i.e., fixed- or variable geometry), and the high- and low-pressure compressor work split. Ramp weight, fuel burn, noise, and emissions are the parameters treated as dependent objective functions. These optimized solutions provide insight to the ultrahigh bypass engine design process and provide information to NASA program management to help guide its technology development efforts.

  11. Psoralen-containing sunscreen is tumorigenic in hairless mice

    SciTech Connect

    Cartwright, L.E.; Walter, J.F.

    1983-06-01

    Sunscreens containing 5-methoxypsoralen (5-MOP) are currently being marketed to promote tanning by inducing psoralen-mediated ultraviolet (UV) A (320-400 nm) melanogenesis. The rationale is that this may prevent UVB (290-320 nm) radiation-induced skin damage. However, mouse studies have shown that 5-MOP has the same cutaneous photocarcinogenic potential as 8-methoxypsoralen. In addition, the 5-MOP--containing sunscreen Sun System III (SS III), when combined with UVA, induces epidermal ornithine decarboxylase activity, an enzyme associated with tumor promotion. Therefore, we investigated whether SS III had sufficient psoralen concentration to be tumorigenic in hairless mice exposed to chronic, intermittent UVA radiation. SS III was applied to hairless mice 5 days per week for 20 weeks. After each application the mice were exposed to 2.5 to 10 joules/cm2 UVA radiation. All test groups developed atypical squamous papillomas in direct proportion to the dosage of UVA radiation received. A shorter latency period for tumor development was seen with larger UVA doses. Test animals followed up to 1 year developed invasive squamous cell tumors. Control groups (SS III without UVA and UVA without SS III) remained free of tumors. Animals receiving SS III plus UVA developed persistent skin thickening and increased dermal cyst formation similar to that reported with chronic exposure to UVB, a known carcinogenic wavelength.

  12. Disposal of Energy by UV-B Sunscreens

    NASA Astrophysics Data System (ADS)

    Nordlund, Thomas; Krishnan, Rajagopal

    2008-03-01

    Ideal sunscreens absorb dangerous UV light and dispose of the energy safely. ``Safe disposal'' usually means conversion to heat. However, efficient absorption entails a high radiative rate, which implies high energy-transfer and other rates, unless some process intervenes to ``defuse'' the excited state. We studied the excited-state kinetics of three UV-B (290-320 nm) sunscreens by absorption, steady-state and time-resolved fluorescence. Excited-state rate analysis suggests that some sunscreens have low radiative-rate ``dark'' states, in addition to normal excited states.* We deduce dark states when sunscreens of high extinction coefficient do not show lifetimes and total emission consistent with such high radiative rates. A high radiative rate, accompanied by efficient fluorescence emission and/or transfer, may be unfavorable for a sunscreen. In spite of its dark excited state, padimate O shows significant re-emission of light in the UV-A (320-400 nm) and energy transfer to a natural component of excised skin, probably collagen. * Krishnan, R. and T.M. Nordlund (2007) J. Fluoresc. DOI 10.1007/s10895-007-0264-3.

  13. The internal bunch coordinate monitor (IBCM)

    SciTech Connect

    Yamin, S.P.

    1988-11-04

    An instrument has been developed and installed at the AGS for recording the transverse motion of each rf bunch. It can be operated from any node of the Apollo control system. A preliminary version of this report has appeared elsewhere. Appendix A is an instruction manual. Two digitizers, running off the same 100 MHz clock, sampled the output of either a horizontal or vertical pick-up electrode (PUE) pair. The coordinate of each rf bunch was calculated each time it passed the PUEs during a 320 microsecond interval. Thus, the motion of each bunch could be followed during this interval. Subsequent analysis computed the Fourier transform of this motion. Bunch motion has been studied at several times during the AGS cycle: the betatron oscillations induced by the tune meter's vertical kick have been seen, and their Fourier analysis gives results consistent with the tune meter; at transition, the effect of the radial kick on each bunch has been observed; coupled-bunch oscillations have been studied; and instabilities produced by high intensities have been observed. 6 figs., 1 tab.

  14. SWIR InGaAs focal plane arrays in France

    NASA Astrophysics Data System (ADS)

    Rouvié, A.; Huet, O.; Hamard, S.; Truffer, J. P.; Pozzi, M.; Decobert, J.; Costard, E.; Zécri, M.; Maillart, P.; Reibel, Y.; Pécheur, A.

    2013-06-01

    SWIR detection band benefits from natural (sun, night glow, thermal radiation) or artificial (eye safe lasers) photons sources combined to low atmospheric absorption and specific contrast compared to visible wavelengths. It gives the opportunity to address a large spectrum of applications such as defense and security (night vision, active imaging), space (earth observation), transport (automotive safety) or industry (non destructive process control). InGaAs material appears as a good candidate to satisfy SWIR detection needs. The lattice matching with InP constitutes a double advantage to this material: attractive production capacity and uncooled operation thanks to low dark current level induced by high quality material. The study of InGaAs FPA has begun few years ago with III-VLab, gathering expertise in InGaAs material growth and imaging technology respectively from Alcatel-Lucent and Thales, its two mother companies. This work has led to put quickly on the market a 320x256 InGaAs module. The recent transfer of imagery activities from III-VLab to Sofradir allows developing new high performances products, satisfying customers' new requirements. Especially, a 640x512 InGaAs module with a pitch of 15µm is actually under development to fill the needs of low light level imaging.

  15. Design and development of a Virtual Dolphinarium for children with autism.

    PubMed

    Cai, Yiyu; Chia, Noel K H; Thalmann, Daniel; Kee, Norman K N; Zheng, Jianmin; Thalmann, Nadia M

    2013-03-01

    The recent proliferation of virtual reality (VR) technology applications in the autism therapy to promote learning and positive behavior among such children has produced optimistic results in developing a variety of skills and abilities in them. Dolphin-assisted therapy has also become a topic of public and research interest for autism intervention and treatment. This paper will present an innovative design and development of a Virtual Dolphinarium for potential autism intervention. Instead of emulating the swimming with dolphins, our virtual dolphin interaction program will allow children with autism to act as dolphin trainers at the poolside and to learn (nonverbal) communication through hand gestures with the virtual dolphins. Immersive visualization and gesture-based interaction are implemented to engage children with autism within an immersive room equipped with a curved screen spanning a 320(°) and a high-end five-panel projection system. This paper will also report a pilot study to establish trial protocol of autism screening to explore the participants' readiness for the virtual dolphin interaction. This research will have two potential benefits in the sense of helping children with autism and protecting the endangered species. PMID:23362251

  16. A human homologue to the yeast omnipotent suppressor 45 maps 100 kb centromeric to HLA-A

    SciTech Connect

    Chauvel, B.; Dorval, I.; Fergelot, P.

    1995-04-01

    Idipathic hemochromatosis is a common autosomal recessive inherited disorder of iron metabolism. The molecular defect is unknown. However, the gene responsible for the disease (HFE) has been localized on the short arm of chromosome 6. It is closely linked to the HLA class I genes and possibly within a 350 kilobase (kb) region around the HLA-A locus. In order to identify candidate genes for hemochromatosis, we applied a cDNA selection technique to isolate transcribed sequences encoded on yeast artificial chromosomes (YAC). At first, we screened a cDNA library derived from normal human duodenal mucosa with the YAC B30 H3. This YAC contains a 320 kb DNA insert including the HLA-A gene and spanning 150 kb of the 350 kb zone where the hemochromatosis gene is in linkage disequilibrium with restriction fragment length polymorphism (RFLP) markers. Preparation of the cDNA library of duodenal mucosa in Lambda Zap II phage and library screening with YAC B30 were carried out as previously described. In this way, we isolated seven non-HLA-A cDNAs corresponding to seven new genomic sequences. These potential genes were named hemochromatosis candidate gene (HCG) and numbered I to VII. The survey of all these cDNAs and their corresponding genomic sequences is in progress. In this work, we are especially interested in one of the seven non-HLA class I cDNA clones, named clone 58. 12 refs., 2 figs.

  17. 320 x 256 Complementary Barrier Infrared Detector Focal Plane Array for Long-Wave Infrared Imaging

    NASA Technical Reports Server (NTRS)

    Nguyen, Jean; Rafol, Sir B.; Soibel, Alexander; Khoskhlagh, Arezou; Ting, David Z.-Y.; Liu, John K.; Mumolo, Jason M.; Gunapala, Sarath D.

    2012-01-01

    A 320 x 256 Complementary Barrier Infrared (CBIRD) focal plane array for long-wavelength infrared (LWIR) imaging is reported. The arrays were grown by molecular beam expitaxy (MBE) with a 300 period 1.9 um thick absorber. The mean dark current density of 2.2 x 10-4 A/cm2 was measured at an operating bias of 128 mV with a long wavelength cutoff of 8.8 ?m observed at 50% of the peak. The maximum quantum efficiency was 54% measured at 5.6 ?m. Operating at T = 80K, the array yielded an 81% fill factor with 97% operability. Good imagery with a mean noise equivalent different temperature (NE?T) of 18.6 mK and a mean detectivity of D* = 1.3 x 1011 cm-Hz1/2/W was achieved. The substrate was thinned using mechanical lapping and neither an AR coating nor a passivation layer was applied. This article provides the details of the fabrication process for achieving low-dark current LWIR CBIRD arrays. Discussion for an effective hard mask for excellent pattern transfer is given and appropriate mounting techniques for good thermal contact during the dry etching process is described. The challenges and differences between etching large 200 ?m test diodes and small 28 ?m FPA pixels are given.

  18. Infrared focal plane array modeling for aerospace and automotive applications

    NASA Astrophysics Data System (ADS)

    Durand, Alain; de Borniol, Eric; Guerineau, Nicolas; Cathala, Thierry; Yon, Jean-Jacques; Ouvrier-Buffet, Jean-Louis; Castelein, Pierre; Tronel, Robert; Bisotto, Sylvette; Destefanis, Gerard L.; Chamonal, Jean-Paul

    2004-08-01

    To simulate an Enhanced Vision System (EVS), CEA/LETI Infrared Laboratory has developed two behavioural models of infrared focal plane arrays : one in the Short Wave IR and the other in the Long Wave IR band. These Infrared Focal Plane Arrays (IRFPAs) models will be implemented on simulation platform aimed at evaluating the impact and use of infrared sensors in automotive and aeronautic applications. To be realistic, model parameters are extracted from electro-optical characterization of real components. The SWIR detector is calibrated with a 320x256 HgCdTe cooled FPA component from SOFRADIR, and the LWIR one with an uncooled micro-bolometer array from ULIS (a_Si technology from LETI). The flexibility of the models allows to simulate cameras based on these components and to forecast future ones based on different read-out circuit or detector technologies. In this paper we present the IRFPAs models, the main electro-optical characterization results and we compare some experimental measurements with simulations.

  19. Cavity-enhanced Raman microscopy of individual carbon nanotubes.

    PubMed

    Hümmer, Thomas; Noe, Jonathan; Hofmann, Matthias S; Hänsch, Theodor W; Högele, Alexander; Hunger, David

    2016-01-01

    Raman spectroscopy reveals chemically specific information and provides label-free insight into the molecular world. However, the signals are intrinsically weak and call for enhancement techniques. Here, we demonstrate Purcell enhancement of Raman scattering in a tunable high-finesse microcavity, and utilize it for molecular diagnostics by combined Raman and absorption imaging. Studying individual single-wall carbon nanotubes, we identify crucial structural parameters such as nanotube radius, electronic structure and extinction cross-section. We observe a 320-times enhanced Raman scattering spectral density and an effective Purcell factor of 6.2, together with a collection efficiency of 60%. Potential for significantly higher enhancement, quantitative signals, inherent spectral filtering and absence of intrinsic background in cavity-vacuum stimulated Raman scattering render the technique a promising tool for molecular imaging. Furthermore, cavity-enhanced Raman transitions involving localized excitons could potentially be used for gaining quantum control over nanomechanical motion and open a route for molecular cavity optomechanics. PMID:27402165

  20. Application of real-time single camera SLAM technology for image-guided targeting in neurosurgery

    NASA Astrophysics Data System (ADS)

    Chang, Yau-Zen; Hou, Jung-Fu; Tsao, Yi Hsiang; Lee, Shih-Tseng

    2012-10-01

    In this paper, we propose an application of augmented reality technology for targeting tumors or anatomical structures inside the skull. The application is a combination of the technologies of MonoSLAM (Single Camera Simultaneous Localization and Mapping) and computer graphics. A stereo vision system is developed to construct geometric data of human face for registration with CT images. Reliability and accuracy of the application is enhanced by the use of fiduciary markers fixed to the skull. The MonoSLAM keeps track of the current location of the camera with respect to an augmented reality (AR) marker using the extended Kalman filter. The fiduciary markers provide reference when the AR marker is invisible to the camera. Relationship between the markers on the face and the augmented reality marker is obtained by a registration procedure by the stereo vision system and is updated on-line. A commercially available Android based tablet PC equipped with a 320×240 front-facing camera was used for implementation. The system is able to provide a live view of the patient overlaid by the solid models of tumors or anatomical structures, as well as the missing part of the tool inside the skull.

  1. Development of Custom 465® Corrosion-Resisting Steel for Landing Gear Applications

    NASA Astrophysics Data System (ADS)

    Daymond, Benjamin T.; Binot, Nicolas; Schmidt, Michael L.; Preston, Steve; Collins, Richard; Shepherd, Alan

    2016-04-01

    Existing high-strength low-alloy steels have been in place on landing gear for many years owing to their superior strength and cost performance. However, there have been major advances in improving the strength of high-performance corrosion-resisting steels. These materials have superior environmental robustness and remove the need for harmful protective coatings such as chromates and cadmium now on the list for removal under REACH legislation. A UK government-funded collaborative project is underway targeting a refined specification Custom 465® precipitation hardened stainless steel to replace the current material on Airbus A320 family aircraft main landing gear, a main fitting component developed by Messier-Bugatti-Dowty. This is a collaborative project between Airbus, Messier-Bugatti-Dowty, and Carpenter Technology Corporation. An extensive series of coupon tests on four production Heats of the material have been conducted, to obtain a full range of mechanical, fatigue, and corrosion properties. Custom 465® is an excellent replacement to the current material, with comparable tensile strength and fracture toughness, better ductility, and very good general corrosion and stress corrosion cracking resistance. Fatigue performance is the only significant area of deficit with respect to incumbent materials, fatigue initiation being often related to carbo-titanium-nitride particles and cleavage zones.

  2. At what time should one go out in the sun?

    PubMed

    Moan, Johan; Dahlback, Arne; Porojnicu, Alina Carmen

    2008-01-01

    To get an optimal vitamin D supplement from the sun at a minimal risk of getting cutaneous malignant melanoma (CMM), the best time of sun exposure is noon. Thus, common health recommendations given by authorities in many countries, that sun exposure should be avoided for three to five hours around noon and postponed to the afternoon, may be wrong and may even promote CMM. The reasons for this are (1) The action spectrum for CMM is likely to be centered at longer wavelengths (UVA, ultraviolet A, 320-400 nm) than that of vitamin D generation (UVB, ultraviolet B, 280-320 nm). (2) Scattering of solar radiation on clear days is caused by small scattering elements, Rayleigh dominated and increases with decreasing wavelengths. A larger fraction of UVA than of UVB comes directly and unscattered from the sun. (3) The human body can be more realistically represented by a vertical cylinder than by a horizontal, planar surface, as done in almost all calculations in the literature. With the cylinder model, high UVA fluence rates last about twice as long after noon as high UVB fluence rates do. In view of this, short, nonerythemogenic exposures around noon should be recommended rather than longer nonerythemogenic exposures in the afternoon. This would give a maximal yield of vitamin D at a minimal CMM risk. PMID:18348449

  3. Photocatalytic reactive oxygen species production and phototoxicity of titanium dioxide nanoparticles are dependent on the solar ultraviolet radiation spectrum.

    PubMed

    Ma, Hongbo; Brennan, Amanda; Diamond, Stephen A

    2012-09-01

    Generation of reactive oxygen species (ROS) by titanium dioxide nanoparticles (nano-TiO(2)) and its consequent phototoxicity to Daphnia magna were measured under different solar ultraviolet (UV) spectra by applying a series of optical filters in a solar simulator. Removing UV-B (280-320 nm) from solar radiation had no significant impact on photocatalytic ROS production of nano-TiO(2), whereas removal of UV-A (320-400 nm) decreased ROS production remarkably. Removal of wavelengths below 400 nm resulted in negligible ROS production. A linear correlation between ROS production and D. magna immobilization suggests that photocatalytic ROS production may be a predictor of phototoxicity for nano-TiO(2). Intracellular ROS production within D. magna was consistent with the immobilization of the organism under different solar UV spectra, indicating that oxidative stress was involved in phototoxicity. The dependence of nano-TiO(2) phototoxicity on environmentally realistic variations in solar radiation suggests that risk assessment of these nanomaterials requires careful evaluation of exposure conditions in the environment.

  4. Assessing daily actual evapotranspiration through energy balance: an experiment to evaluate the selfpreservation hypothesis with acquisition time

    NASA Astrophysics Data System (ADS)

    Maltese, A.; Capodici, F.; Ciraolo, G.; La Loggia, G.; Rallo, G.

    2013-10-01

    An operational use of the actual evapotranspiration estimates requires the integration from instantaneous to daily values. This can commonly be achieved under the hypothesis of daytime self-preservation of the evaporative fraction. In this study, it has been evaluated the effect of this assumption on the assessment of daily evapotranspiration from proximity sensing images acquired at hourly intervals over a homogeneous olive groove. Results have been validated by comparison with observations made by a micrometeorological (EC-flux tower) and an eco-physiological (sap flux) sensor. SEBAL model has been applied to thermal and multispectral images acquired during a clear day on August 2009 trough a FLIR A320G thermal camera and a Tetracam MCA II multispectral camera, installed on a tethered helium balloon. Thermal and multispectral images were characterized by very high spatial resolution. This experiment aims to analyze two effects: 1) the consistency of the self-preservation hypothesis for daily estimates of the actual evapotranspiration from hourly assessments at different times of the day; 2) the effects of the spatial resolution on the performances of the energy balance model. To evaluate the effects of the spatial resolution, semi-hourly observations made by a flux tower and sap-flow measures were compared to the evapotranspiration estimates performed using downscaled images at resolutions close to canopy sizes (2, 5 and 10 m). Results show that the best estimates are obtained with a spatial resolution comparable to the average size of the canopy with images taken approximately at 10 UTC.

  5. [Motion analysis of target in stereotactic radiotherapy of lung tumors using 320-row multidetector CT].

    PubMed

    Imae, Toshikazu; Haga, Akihiro; Nakagawa, Keiichi; Ino, Kenji; Tanaka, Kenichirou; Okano, Yukari; Sasaki, Katsutake; Saegusa, Shigeki; Shiraki, Takashi; Oritate, Takashi; Yano, Keiichi; Shinohara, Hiroyuki

    2011-01-01

    Multi-detector computed tomography (MDCT) has rapidly evolved and is increasingly used for treatment simulation of thoracic and abdominal radiotherapy. A 320-detector row CT scanner has recently become available that allows axial volumetric scanning of a 16-cm-long range in a patient without table movement. Current radiotherapy techniques require a generous margin around the presumed gross tumor volume (GTV) to account for uncertainties such as tumor motion and set up error. Motion analysis is useful to evaluate the internal margin of a moving target due to respiration and to improve therapeutic precision. The purpose of this study is to propose a method using phase-only correlation to automatically detect the target and to assess the motion of the target in numerical phantoms and patients. Free-breathing scans using 320-detector row CT were acquired for 4 patients with lung tumor(s). The proposed method was feasible for motion analysis of all numerical phantoms and patients. The results reproduced the facts that the motion of tumors in the patients varied in orbits during the respiratory cycle and exhibited hysteresis. The maximum distance between peak exhalation and inhalation increased as the tumors approached the diaphragm. The proposed method detected the three-dimensional position of the targets automatically and analyzed the trajectories. The tumor motion due to respiration differed by region and was greatest for the lower lobe. PMID:21471676

  6. Photophysical, photochemical and photobiological properties of pyrrolocoumarins; a new class of photoactive compounds.

    PubMed

    Gibbs, N K; Quanten, E; Baydoun, S; Knox, C N; Roelandts, R; de Schryver, F; Truscott, T G; Young, A R

    1988-07-01

    With the aim of finding new photoactive compounds that may reduce the side effects of 8-methoxypsoralen photochemotherapy we report on some photophysical, photochemical and photobiological properties of recently synthesized pyrrolocoumarins, in particular 4-methyl-N-ethyl-pyrrolo[3,2-g]coumarin (PCNEt) which has an absorption maximum in the UV-A (320-400 nm). Laser (347 nm) flash photolysis studies showed triplet transients that were quenched by O2 and by ground state PCNEt. Singlet minus triplet spectra were broad (350-550 nm) and, at 700 nm, indicated solvated electron and radical production. PCNEt complexes with DNA in the dark and photobinds to thymine but does not form DNA cross-links. PCNEt was phototoxic in yeast with an action spectrum similar to its absorption spectrum. PCNEt showed photohaemolytic activity but was not phototoxic on guinea pig skin. These data suggest that PCNEt may photosensitize via several mechanisms: direct DNA photobinding, photodynamic action, or photoproduction of radicals.

  7. Commercialization of quantum well infrared photodetector focal plane arrays

    NASA Astrophysics Data System (ADS)

    Kukkonen, C. A.; Sirangelo, M. N.; Chehayeb, R.; Kaufmann, M.; Liu, J. K.; Rafol, S. B.; Gunapala, S. D.

    2001-06-01

    Many commercial and government applications need high performance, large format, long-wavelength infrared (LWIR) detector arrays in the range of 6-20 μm. NASA and the ballistic missile defense organization (BMDO) have devoted a significant effort to develop highly sensitive infrared (IR) detectors and large format focal plane arrays (FPAs) based on novel 'artificial' low effective bandgap semiconductor material systems such as GaAs/AlGaAs. Caltech's Jet propulsion laboratory (JPL) under contract from NASA and BMDO has extensively pursued GaAs/AlGaAs based multi-quantum wells (MQWs) for IR radiation detection. Optimization of the detector design, light coupling schemes, large format FPA fabrication and packaging techniques have culminated in the realization of portable LWIR cameras with a mid format (256×256 pixel) FPA of QWIP detectors and the demonstration of TV format (i.e., 640×486) QWIP camera. QWIP technologies LLC, under an exclusive agreement with Caltech is currently manufacturing the QWIP-Chip TM, a 320×256 element FPA. In this, presentation, we will discuss the advantages of MQW technology and our experience in the commercialization of QWIP FPAs.

  8. Micro-engineered remote palpation device for assessing tissue compliance.

    PubMed

    Hien, M; Yang, T H J; Leung, S K W; Reuben, R L; Habib, F K; McNeill, S A; Schneider, A; McBride, G; Stevens, R; Else, R W

    2008-01-01

    This paper concerns the operation of the actuator for a prototype micro-engineered mechanical palpation device for deployment via a cystoscope to measure the dynamic mechanical properties of the prostate gland in vivo. The subassembly consists of a 400x200 microm silicon (Si) piston manufactured using deep reactive ion etching (DRIE) housed within an anodically bonded glass-Si-glass sandwiched housing. The micro-channel on the Si layer was formed by powder blasting and contains the micro-piston with one end pointing to the side of the housing and the other facing a via hole leading to a capillary tube. The opening on the side of the housing was sealed by a 5 microm thick silicone membrane which acts to retain the micro-piston and act as a return spring. A 320 microm diameter capillary forms the connection between the micro-channel and a micro-syringe which is operated by a programmable syringe pump to produce a reciprocating action. A pressure sensor is connected along the capillary tube to measure the dynamic pressure within the system. The micro-piston has already been used, separately actuated to measure the dynamic mechanical properties of known viscoelastic materials and prostate tissue. The purpose of the present work is to assess the functionality of the actuator assembly.

  9. Direct measurement of 11B(p ,γ )12C astrophysical S factors at low energies

    NASA Astrophysics Data System (ADS)

    He, J. J.; Jia, B. L.; Xu, S. W.; Chen, S. Z.; Ma, S. B.; Hou, S. Q.; Hu, J.; Zhang, L. Y.; Yu, X. Q.

    2016-05-01

    We directly measure the absolute cross section of 11B(p ,γ )12C in the energy region of Ec .m .=130 -257 keV by using a thin target for the first time. This work is performed on a 320-kV platform at the Institute of Modern Physics in Lanzhou. The astrophysical S factors of this reaction are obtained for capture to the ground and first excited states of 12C. The properties of the known resonance at ˜150 keV are derived and agree with the previous results. However, in the energy region of 170-240 keV, our S factors are about 15%-50% larger than the adopted values in NACRE II and are also larger than the upper limits of NACRE II by up to ˜20 % . This indicates that our new reaction rate is enhanced by about 15%-50% compared to the NACRE II adopted rate in the temperature region 0.32-0.62 GK.

  10. Portable hyperspectral fluorescence imaging system for detection of biofilms on stainless steel surfaces

    NASA Astrophysics Data System (ADS)

    Jun, Won; Lee, Kangjin; Millner, Patricia; Sharma, Manan; Chao, Kuanglin; Kim, Moon S.

    2008-04-01

    A rapid nondestructive technology is needed to detect bacterial contamination on the surfaces of food processing equipment to reduce public health risks. A portable hyperspectral fluorescence imaging system was used to evaluate potential detection of microbial biofilm on stainless steel typically used in the manufacture of food processing equipment. Stainless steel coupons were immersed in bacterium cultures, such as E. coli, Pseudomonas pertucinogena, Erwinia chrysanthemi, and Listeria innocula. Following a 1-week exposure, biofilm formations were assessed using fluorescence imaging. In addition, the effects on biofilm formation from both tryptic soy broth (TSB) and M9 medium with casamino acids (M9C) were examined. TSB grown cells enhance biofilm production compared with M9C-grown cells. Hyperspectral fluorescence images of the biofilm samples, in response to ultraviolet-A (320 to 400 nm) excitation, were acquired from approximately 416 to 700 nm. Visual evaluation of individual images at emission peak wavelengths in the blue revealed the most contrast between biofilms and stainless steel coupons. Two-band ratios compared with the single-band images increased the contrast between the biofilm forming area and stainless steel coupon surfaces. The 444/588 nm ratio images exhibited the greatest contrast between the biofilm formations and stainless coupon surfaces.

  11. Sub-Surface Windscreen for the Measurement of Outdoor Infrasound

    NASA Technical Reports Server (NTRS)

    Shams, Qamar A.; Burkett, Cecil G., Jr.; Comeaux, Toby; Zuckerwar, Allan J.; Weistroffer, George R.

    2008-01-01

    A windscreen has been developed that features two advantages favorable for the measurement of outdoor infrasound. First, the sub-surface location, with the top of the windscreen flush with the ground surface, minimizes the mean velocity of the impinging wind. Secondly, the windscreen material (closed cell polyurethane foam) has a sufficiently low acoustic impedance (222 times that of air) and wall thickness (0.0127 m) to provide a transmission coefficient of nearly unity over the infrasonic frequency range (0-20 Hz). The windscreen, a tightly-sealed box having internal dimensions of 0.3048 x 0.3048 x 0.3556 m, contains a microphone, preamplifier, and a cable feed thru to an external power supply. Provisions are made for rain drainage and seismic isolation. A three-element array, configured as an equilateral triangle with 30.48 m spacing and operating continuously in the field, periodically receives highly coherent signals attributed to emissions from atmospheric turbulence. The time delays between infrasonic signals received at the microphones permit determination of the bearing and elevation of the sources, which correlate well with locations of pilot reports (PIREPS) within a 320 km radius about the array. The test results are interpreted to yield spectral information on infrasonic emissions from clear air turbulence.

  12. Effects of Nd: YAG laser irradiation on the root canal wall dentin of human teeth: a SEM study.

    PubMed

    Kaitsas, V; Signore, A; Fonzi, L; Benedicenti, S; Barone, M

    2001-01-01

    The purpose of this study was to observe the morphological and histological changes on the root canal walls after Nd:YAG laser application. Twenty vital, recently extracted single-rooted human teeth were used for this study. Root canals were cleaned and shaped by a conventional step-back technique--by means of k files up to a 20 k-file type at working length--and subsequently shaped by Ni-Ti root-canal rotary instrumentation up to 30/06 and irrigated with 2.5% hypochlorite solution. Ten teeth (control group) were left unlased, while the other ten teeth were irradiated with Nd:YAG laser by means of a 320 microns fibre inserted in the root canal at 1 mm from the apex with a power of 1.5 Watt and a frequency of 15 pps for five seconds in retraction with rotating movements. The control specimen showed debris and smear layer on the root canal surface obscuring the dentin tubules. The root canal walls irradiated with Nd:YAG laser showed a clear glazed surface, some open dentinal tubules and some surface craters with cracks. Such results confirm that smear layer and debris are removable with Nd:YAG laser, however clearing all root canal walls is still difficult and, if the energy level and duration of application are inadequate, a certain degree of thermal damage and morphological changes in dentin structure are observable. PMID:11938590

  13. Regulation of keratin expression by ultraviolet radiation: differential and specific effects of ultraviolet B and ultraviolet a exposure.

    PubMed

    Bernerd, F; Del Bino, S; Asselineau, D

    2001-12-01

    Skin, the most superficial tissue of our body, is the first target of environmental stimuli, among which is solar ultraviolet radiation. Very little is known about the regulation of keratin gene expression by ultraviolet radiation, however, although (i) it is well established that ultraviolet exposure is involved in skin cancers and photoaging and (ii) keratins represent the major epidermal proteins. The aim of this study was to analyze the regulation of human keratin gene expression under ultraviolet B (290-320 nm) or ultraviolet A (320-400 nm) irradiation using a panel of constructs comprising different human keratin promoters cloned upstream of a chloramphenicol acetyl transferase reporter gene and transfected into normal epidermal keratinocytes. By this approach, we demonstrated that ultraviolet B upregulated the transcription of keratin 19 gene and to a lesser extent the keratin 6, keratin 5, and keratin 14 genes. The DNA sequence responsible for keratin 19 induction was localized between -130 and +1. In contrast to ultraviolet B, ultraviolet A irradiation induced only an increase in keratin 17, showing a differential gene regulation between these two ultraviolet ranges. The induction of keratin 19 was confirmed by studying the endogenous protein in keratinocytes in classical cultures as well as in skin reconstructed in vitro and normal human skin. These data show for the first time that keratin gene expression is regulated by ultraviolet radiation at the transcriptional level with a specificity regarding the ultraviolet domain of solar light. PMID:11886503

  14. Regulation of keratin expression by ultraviolet radiation: differential and specific effects of ultraviolet B and ultraviolet a exposure.

    PubMed

    Bernerd, F; Del Bino, S; Asselineau, D

    2001-12-01

    Skin, the most superficial tissue of our body, is the first target of environmental stimuli, among which is solar ultraviolet radiation. Very little is known about the regulation of keratin gene expression by ultraviolet radiation, however, although (i) it is well established that ultraviolet exposure is involved in skin cancers and photoaging and (ii) keratins represent the major epidermal proteins. The aim of this study was to analyze the regulation of human keratin gene expression under ultraviolet B (290-320 nm) or ultraviolet A (320-400 nm) irradiation using a panel of constructs comprising different human keratin promoters cloned upstream of a chloramphenicol acetyl transferase reporter gene and transfected into normal epidermal keratinocytes. By this approach, we demonstrated that ultraviolet B upregulated the transcription of keratin 19 gene and to a lesser extent the keratin 6, keratin 5, and keratin 14 genes. The DNA sequence responsible for keratin 19 induction was localized between -130 and +1. In contrast to ultraviolet B, ultraviolet A irradiation induced only an increase in keratin 17, showing a differential gene regulation between these two ultraviolet ranges. The induction of keratin 19 was confirmed by studying the endogenous protein in keratinocytes in classical cultures as well as in skin reconstructed in vitro and normal human skin. These data show for the first time that keratin gene expression is regulated by ultraviolet radiation at the transcriptional level with a specificity regarding the ultraviolet domain of solar light.

  15. Enhancement of Real-Time THz Imaging System Based on 320 × 240 Uncooled Microbolometer Detector

    NASA Astrophysics Data System (ADS)

    Zheng, Xing; Wu, Zhiming; Gou, Jun; Liu, Ziji; Wang, Jun; Zheng, Jie; Luo, Zhenfei; Chen, Weiqing; Que, Longcheng; Jiang, Yadong

    2016-05-01

    A real-time terahertz (THz) imaging system was demonstrated based on a 320 × 240 uncooled microbolometer detector combined with a 2.52 THz far-infrared CO2 laser. On the top of micro-bridge structure (35 × 35 μm2), a 10 nm nickel-chromium (NiCr) thin film was deposited to enhance THz absorption, which was fabricated by a combined process of magnetron sputtering and reactive ion etching (RIE). By mechanical simulation using design of experiment (DOE) method, the minimum deformation was optimized to 0.0385 μm, and a measured deformation of 0.097 μm was achieved in the fabrication. The fabricated micro-bridge pixel was used for THz detection, and a responsivity of 1235 V/W was achieved with a noise equivalent power (NEP) of 87.4 pW/Hz1/2. THz imaging of metal gasket covered by label paper, paper clip in an envelope, and watermark of a banknote was demonstrated by a combination of histogram equalization (HE) and linear enhancement algorithm.

  16. Testing the impact of climate variability on European plant diversity: 320,000 years of water-energy dynamics and its long-term influence on plant taxonomic richness.

    PubMed

    Willis, Katherine J; Kleczkowski, Adam; New, Mark; Whittaker, Robert J

    2007-08-01

    Models examining the present-day relationship between macro-scale patterns in terrestrial species richness and variables of water and energy demonstrate that a combined water-energy model is a good predictor of richness in mid-to-high latitude regions. However, the power of the individual water and energy variables to explain this richness through time has never been explored. Here, we assess how well energy and water can predict long-term variations in plant richness using a 320,000-year fossil pollen data set from Hungary. Results demonstrate that a combined water-energy model best explains the variation in plant diversity through time. However, this long temporal record also demonstrates that amplitude of energy variation appears to be a strong determinant of richness. Decreased richness correlates with increased climate variability and certain species appear to be more susceptible according to their ecological traits. These findings have important implications for predicting richness at times of increasing climate variability.

  17. Comparing in situ removal strategies for improving styrene bioproduction.

    PubMed

    McKenna, Rebekah; Moya, Luis; McDaniel, Matthew; Nielsen, David R

    2015-01-01

    As an important conventional monomer compound, the biological production of styrene carries significant promise with respect to creating novel sustainable materials. Since end-product toxicity presently limits styrene production by previously engineered Escherichia coli, in situ product removal by both solvent extraction and gas stripping were explored as process-based strategies for circumventing its inhibitory effects. In solvent extraction, the addition of bis(2-ethylhexyl)phthalate offered the greatest productivity enhancement, allowing net volumetric production of 836 ± 64 mg/L to be reached, representing a 320 % improvement over single-phase cultures. Gas stripping rates, meanwhile, were controlled by rates of bioreactor agitation and, to a greater extent, aeration. A periodic gas stripping protocol ultimately enabled up to 561 ± 15 mg/L styrene to be attained. Lastly, by relieving the effects of styrene toxicity, new insight was gained regarding subsequent factors limiting its biosynthesis in E. coli and strategies for future strain improvement are discussed. PMID:25034182

  18. Concentrating-collector mass-production feasibility. Volume I. Final report

    SciTech Connect

    Not Available

    1981-11-02

    The Performance Prototype Trough (PPT) Concentrating Collector consists of four 80-foot modules in a 320-foot row. The collector was analyzed, including cost estimates and manufacturing processes to produce collectors in volumes from 100 to 100,000 modules per year. The four different reflector concepts considered were the sandwich reflector structure, sheet metal reflector structure, molded reflector structure, and glass laminate structure. The sheet metal and glass laminate structures are emphasized with their related structure concepts. A preliminary manufacturing plan is offered that includes: documentation of the manufacturing process with production flow diagrams; labor and material costs at various production levels; machinery and equipment requirements including preliminary design specifications; and capital investment costs for a new plant. Of five reflector designs considered, the two judged best and considered at length are thin annealed glass and steel laminate on steel frame panel and thermally sagged glass. Also discussed are market considerations, costing and selling price estimates, design cost analysis and make/buy analysis. (LEW)

  19. Emission analysis of large number of various passenger electronic devices in aircraft

    NASA Astrophysics Data System (ADS)

    Schüür, Jens; Oppermann, Lukas; Enders, Achim; Nunes, Rafael R.; Oertel, Carl-Henrik

    2016-09-01

    The ever increasing use of PEDs (passenger or portable electronic devices) has put pressure on the aircraft industry as well as operators and administrations to reevaluate established restrictions in PED-use on airplanes in the last years. Any electronic device could cause electromagnetic interference to the electronics of the airplane, especially interference at receiving antennas of sensitive wireless navigation and communication (NAV/COM) systems. This paper presents a measurement campaign in an Airbus A320. 69 test passengers were asked to actively use a combination of about 150 electronic devices including many attached cables, preferentially with a high data load on their buses, to provoke maximal emissions. These emissions were analysed within the cabin as well as at the inputs of aircraft receiving antennas outside of the fuselage. The emissions of the electronic devices as well as the background noise are time-variant, so just comparing only one reference and one transmission measurement is not sufficient. Repeated measurements of both cases lead to a more reliable first analysis. Additional measurements of the absolute received power at the antennas of the airplane allow a good estimation of the real interference potential to aircraft NAV/COM systems. Although there were many measured emissions within the cabin, there were no disturbance signals detectable at the aircraft antennas.

  20. [Evaluation of the impact on Aedes aegypti infestation in cement tanks of the municipal district of Canindé, Ceará, Brazil after using the Betta splendens fish as an alternative biological control].

    PubMed

    Pamplona, Luciano de Góes Cavalcanti; Lima, José Wellington de Oliveira; Cunha, Jane Cris de Lima; Santana, Eddie William de Pinho

    2004-01-01

    Canindé has a population of 71,235 inhabitants. In April 2001, the city started using larvivorous fish in cement water tanks, as a means of biological control of Aedes aegypti larvae. During house-to-house visits by health agents, instead of treating the water tank with larvicide, a Betta splendens fish was introduced into each tank. The number of houses and the number of tanks was estimated by monthly surveys. Then, the number of tanks per house was determined. Taking into account this estimated number and the number of houses visited, the infestation level for each kind of deposit was analyzed. In January 2001, 70.4% of the water tanks presented mosquitoes. Following the intervention, in January 2002 only 7.4% were positive and by December 2002 the rate had dropped to 0.2%. The efficacy of Betta splendens as a biological control agent in cement water tanks was clearly demonstrated, by achieving a 320 times reduction in the infestation level. PMID:15361957

  1. X-Pinch Measurements Performed on a 1-microsecond Current Generator.

    NASA Astrophysics Data System (ADS)

    Appartaim, Richard; Maakuu, Bulmuo

    2008-11-01

    A 320 kiloamp, 1-microsecond current generator based on a simple L-C discharge has been used to drive 2-wire and 4-wire X-pinches of tungsten, aluminum, titanium, etc., with diameters ranging from 13--25 microns. We report the results of measurements of the characteristics and dynamics of the X-pinch using silicon p-n junction photodiodes, a diamond radiation detector, pinhole cameras, x-ray spectroscopy and interferometry. The time duration of the observed x-ray pulses as well as the difference in the spectral sensitivities of the silicon and diamond radiation detectors provide a way to determine what fraction of the emitted x-rays is soft (e.g. with photon energy from 1 keV to 5 keV that may be emitted from high temperature plasmas at the hot spots) and what fraction is due to dense plasma interactions with electron beams accelerated across mini-diodes near the X-pinch crossing point. We address this issue as well as present the results of spectroscopic measurements of plasma parameters.

  2. Shear bond strength of seventh generation bonding agents on dentin of primary teeth--an in vitro study.

    PubMed

    Gonzalez, Geoffrey; Rich, Alfred P; Finkelman, Matthew D; Defuria, Catherine

    2012-01-01

    This controlled, randomized, in vitro study evaluated the shear bond strength of several seventh generation bonding agents on the dentin of primary teeth. Six different adhesives were used: Xeno IV, Clearfil S3 Bond, Adper Prompt-L-Pop, AdheSE One, Bond Force, and Optibond (control). Ninety primary teeth were prepared by wet grinding with a 320-grit silicon carbide paper on a polishing wheel running at 110 RPM. After 24 hours of storage in water, shear bond strengths of each group were determined. The mean shear bond strength of the tested adhesive systems to primary dentin was 12.27 MPa. One-way ANOVA testing showed a statistically significant difference between adhesive products (P < 0.001). Tukey HSD post hoc tests were used to assess which means were significantly different from one another. There was no statistically significant difference between the fifth generation adhesive system (Optibond) and the two seventh generation systems (Xeno IV and Bond Force), with Optibond exhibiting a lower mean shear bond strength compared to Bond Force. Within the limitations of this study, there is a significant difference between seventh generation bonding materials. Bond Force and Optibond appear to exhibit higher shear bond strengths than the other products. PMID:22313979

  3. Data indicating temperature response of Ti-6Al-4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping.

    PubMed

    Marshall, Garrett J; Thompson, Scott M; Shamsaei, Nima

    2016-06-01

    An OPTOMEC Laser Engineered Net Shaping (LENS(™)) 750 system was retrofitted with a melt pool pyrometer and in-chamber infrared (IR) camera for nondestructive thermal inspection of the blown-powder, direct laser deposition (DLD) process. Data indicative of temperature and heat transfer within the melt pool and heat affected zone atop a thin-walled structure of Ti-6Al-4V during its additive manufacture are provided. Melt pool temperature data were collected via the dual-wavelength pyrometer while the dynamic, bulk part temperature distribution was collected using the IR camera. Such data are provided in Comma Separated Values (CSV) file format, containing a 752×480 matrix and a 320×240 matrix of temperatures corresponding to individual pixels of the pyrometer and IR camera, respectively. The IR camera and pyrometer temperature data are provided in blackbody-calibrated, raw forms. Provided thermal data can aid in generating and refining process-property-performance relationships between laser manufacturing and its fabricated materials. PMID:27054180

  4. Photocatalytic antibacterial effects on TiO2-anatase upon UV-A and UV-A/VIS threshold irradiation.

    PubMed

    Wu, Yanyun; Geis-Gerstorfer, Jürgen; Scheideler, Lutz; Rupp, Frank

    2016-01-01

    Photocatalysis mediated by the anatase modification of titanium dioxide (TiO2) has shown antibacterial effects in medical applications. The aim of this study was to investigate the possibility of expanding the excitation wavelengths for photocatalytic antibacterial effects from ultraviolet (UV) into the visible light range. After deposition of salivary pellicle and adhesion of Streptococcus gordonii on anatase, different irradiation protocols were applied to induce photocatalysis: ultraviolet A (UV-A) > 320 nm; ultraviolet/visible (UV-A/VIS) light > 380 nm and > 390 nm; and VIS light 400-410 nm. A quartz crystal microbalance with dissipation (QCM-D) tests and microscopic examination were used to observe the photoinduced antibacterial effects. Salivary pellicle could be photocatalytically decomposed under all irradiation protocols. In contrast, effective photocatalytic attack of bacteria could be observed by UV-A as well as by UV-A/VIS at 380 nm < λ < 390 nm only. Wavelengths above 380 nm show promise for in situ therapeutic antifouling applications. PMID:27089303

  5. Infectious Pancreatic Necrosis Virus Causing Clinical and Subclinical Infections in Atlantic Salmon Have Different Genetic Fingerprints

    PubMed Central

    Mutoloki, Stephen; Jøssund, Trude B.; Ritchie, Gordon; Munang'andu, Hetron M.; Evensen, Øystein

    2016-01-01

    Infectious pancreatic necrosis virus (IPNV) is the causative agent of IPN, an important disease of salmonids. IPNV infections result in either sub-clinical or overt disease and the basis of this difference is not well-understood. The objective of the present study was to determine the VP2 gene of the virus associated with the different forms of clinical manifestation. Groups of Atlantic salmon (Salmo salar L.) reared in farms located in different IPN disease pressures were monitored from brood stock until grow-out over a 3 year period. Hatcheries A1 and B1 as well as cooperating seawater farms were located in a low disease risk area while hatcheries A2 and B2 as well as their cooperating seawater farms were in high IPN risk areas. Samples including eggs, milt, whole fry, kidney depending on the stage of production were collected during outbreaks or in apparently healthy populations where no outbreaks occurred. The virus was re-isolated in CHSE cells and the VP2 gene amplified by RT-PCR followed by sequencing. During the freshwater stage, there were no disease outbreaks at hatcheries A1, A2, and B1 (except in one fish group that originated from hatchery B2), although IPNV was isolated from some of the fish groups at all 3 hatcheries. By contrast, all fish groups at hatchery B2 suffered IPN outbreaks. In seawater, only groups of fish originating from hatchery A1 had no IPN outbreaks albeit virus being isolated from the fish. On the other hand, fish originating from hatcheries A2, B1, and B2 experienced outbreaks in seawater. The VP2 amino acid fingerprint of the virus associated with subclinical infections from A1 and co-operating seawater sites was V64A137P217T221A247N252S281D282E319. By contrast, all virus isolates associated with clinical infections had the motif I64T137T217A221T247V252T281N282A319, where underlined amino acids represent the avirulent and highly virulent motif, respectively. Phylogenetic analysis of amino acid sequences showed 2 clades, one of

  6. Obtaining Seasonal Snow Surface Roughness from Sub-Millimeter to Kilometer Scale Using Plate Photography and Mobile Laser Scanning

    NASA Astrophysics Data System (ADS)

    Anttila, K.; Manninen, T.; Kukko, A.; Kaartinen, H.; Hakala, T.; Kaasalainen, S. M.; Karjalainen, T.; Lahtinen, P.; Krooks, A.; Siljamo, N.; Riihelä, A.

    2013-12-01

    Seasonal snow surface roughness affects the brightness of snow surface and through that the albedo of Earth. It also affects the satellite and radar data of snow surfaces and the wind near the surface. The roughness depends on the direction and distance measured. We have developed a plate-photography method for measuring microscale surface roughness at a resolution of 0.01 mm. The concept is similar to the plate photography method described in Manninen et al. 2012 that can be used to study scales from millimeter to 1-meter scale. Preliminary test measurements were made in different directions daily during one week at the beginning of April 2013. The results have been analysed using multiscale parameters derived from root mean square height (Manninen et al. 1997 &2003). The method proved to be a working concept. For scales longer than one meter we have developed a mobile laser scanning based method for obtaining snow surface roughness (Kukko et al. 2013). In this method we have mounted FGI ROAMER (Kukko et al. 2007) on a sledge driven by a snow mobile. Together these methods will provide means to measure snow surface roughness from sub-millimeter to kilometer scales. Kukko, A., K. Anttila, T. Manninen, H. Kaartinen and S. Kaasalainen (subm.), Snow surface roughness from mobile laser scanning data. Kukko, A., Andrei, C.-O., Salminen, V.-M., Kaartinen, H., Chen, Y., Rönnholm, P., Hyyppä, H., Hyyppä, J., Chen, R., Haggrén, H., Kosonen, I., and Capek K. Road Environment Mapping System of the Finnish Geodetic Institute - FGI Roamer, Int. Arch. Photogramm. Remote Sens., 36, 241-247, 2007. Manninen, A.T. (1997), Surface roughness of Baltic sea ice, Journal of Geophysical Research, Oceans, 102(C1), 1119 -1139. Manninen, A.T. (2003), Multiscale surface roughness description for scattering modeling of bare soil, Physica A, 319, 535 - 551. Manninen, T., K. Anttila, T. Karjalainen, and P. Lahtinen (2012), Automatic snow surface roughness estimation using digital photos

  7. Infectious Pancreatic Necrosis Virus Causing Clinical and Subclinical Infections in Atlantic Salmon Have Different Genetic Fingerprints.

    PubMed

    Mutoloki, Stephen; Jøssund, Trude B; Ritchie, Gordon; Munang'andu, Hetron M; Evensen, Øystein

    2016-01-01

    Infectious pancreatic necrosis virus (IPNV) is the causative agent of IPN, an important disease of salmonids. IPNV infections result in either sub-clinical or overt disease and the basis of this difference is not well-understood. The objective of the present study was to determine the VP2 gene of the virus associated with the different forms of clinical manifestation. Groups of Atlantic salmon (Salmo salar L.) reared in farms located in different IPN disease pressures were monitored from brood stock until grow-out over a 3 year period. Hatcheries A1 and B1 as well as cooperating seawater farms were located in a low disease risk area while hatcheries A2 and B2 as well as their cooperating seawater farms were in high IPN risk areas. Samples including eggs, milt, whole fry, kidney depending on the stage of production were collected during outbreaks or in apparently healthy populations where no outbreaks occurred. The virus was re-isolated in CHSE cells and the VP2 gene amplified by RT-PCR followed by sequencing. During the freshwater stage, there were no disease outbreaks at hatcheries A1, A2, and B1 (except in one fish group that originated from hatchery B2), although IPNV was isolated from some of the fish groups at all 3 hatcheries. By contrast, all fish groups at hatchery B2 suffered IPN outbreaks. In seawater, only groups of fish originating from hatchery A1 had no IPN outbreaks albeit virus being isolated from the fish. On the other hand, fish originating from hatcheries A2, B1, and B2 experienced outbreaks in seawater. The VP2 amino acid fingerprint of the virus associated with subclinical infections from A1 and co-operating seawater sites was V64A137P217T221A247N252S281D282E319. By contrast, all virus isolates associated with clinical infections had the motif I64T137T217A221T247V252T281N282A319, where underlined amino acids represent the avirulent and highly virulent motif, respectively. Phylogenetic analysis of amino acid sequences showed 2 clades, one of

  8. Infectious Pancreatic Necrosis Virus Causing Clinical and Subclinical Infections in Atlantic Salmon Have Different Genetic Fingerprints

    PubMed Central

    Mutoloki, Stephen; Jøssund, Trude B.; Ritchie, Gordon; Munang'andu, Hetron M.; Evensen, Øystein

    2016-01-01

    Infectious pancreatic necrosis virus (IPNV) is the causative agent of IPN, an important disease of salmonids. IPNV infections result in either sub-clinical or overt disease and the basis of this difference is not well-understood. The objective of the present study was to determine the VP2 gene of the virus associated with the different forms of clinical manifestation. Groups of Atlantic salmon (Salmo salar L.) reared in farms located in different IPN disease pressures were monitored from brood stock until grow-out over a 3 year period. Hatcheries A1 and B1 as well as cooperating seawater farms were located in a low disease risk area while hatcheries A2 and B2 as well as their cooperating seawater farms were in high IPN risk areas. Samples including eggs, milt, whole fry, kidney depending on the stage of production were collected during outbreaks or in apparently healthy populations where no outbreaks occurred. The virus was re-isolated in CHSE cells and the VP2 gene amplified by RT-PCR followed by sequencing. During the freshwater stage, there were no disease outbreaks at hatcheries A1, A2, and B1 (except in one fish group that originated from hatchery B2), although IPNV was isolated from some of the fish groups at all 3 hatcheries. By contrast, all fish groups at hatchery B2 suffered IPN outbreaks. In seawater, only groups of fish originating from hatchery A1 had no IPN outbreaks albeit virus being isolated from the fish. On the other hand, fish originating from hatcheries A2, B1, and B2 experienced outbreaks in seawater. The VP2 amino acid fingerprint of the virus associated with subclinical infections from A1 and co-operating seawater sites was V64A137P217T221A247N252S281D282E319. By contrast, all virus isolates associated with clinical infections had the motif I64T137T217A221T247V252T281N282A319, where underlined amino acids represent the avirulent and highly virulent motif, respectively. Phylogenetic analysis of amino acid sequences showed 2 clades, one of

  9. A unique tRNA gene family and a novel, highly expressed ORF in the mitochondrial genome of the silver-lip pearl oyster, Pinctada maxima (Bivalvia: Pteriidae).

    PubMed

    Wu, Xiangyun; Li, Xiaoling; Li, Lu; Yu, Ziniu

    2012-11-15

    Characteristics of mitochondrial (mt) DNA such as gene content and arrangement, as well as mt tRNA secondary structure, are frequently used in comparative genomic analyses because they provide valuable phylogenetic information. However, most analyses do not characterize the relationship of tRNA genes from the same mt genome and, in some cases, analyses overlook possible novel open reading frames (ORFs) when the 13 expected protein-coding genes are already annotated. In this study, we describe the sequence and characterization of the complete mt genome of the silver-lip pearl oyster, Pinctada maxima. The 16,994-bp mt genome contains the same 13 protein-coding genes (PCGs) and two ribosomal RNA genes typical of metazoans. The gene arrangement, however, is completely distinct from that of all other available bivalve mt genomes, and a unique tRNA gene family is observed in this genome. The unique tRNA gene family includes two trnS(-AGY) and trnQ genes, a trnM isomerism, but it lacks trnS(-CUN). We also report the first clear evidence of alloacceptor tRNA gene recruitment (trnP→trnS(-AGY)) in mollusks. In addition, a novel ORF (orfUR1) expressed at high levels is present in the mt genome of this pearl oyster. This gene contains a conserved domain, "Oxidored_q1_N", which is a member of Complex I and thus may play an important role in key biological functions. Because orfUR1 has a very similar nucleotide composition and codon bias to that of other genes in this genome, we hypothesize that this gene may have been moved to the mt genome via gene transfer from the nuclear genome at an early stage of speciation of P. maxima, or it may have evolved as a result of gene duplication, followed by rapid sequence divergence. Lastly, a 319-bp region was identified as the possible control region (CR) even though it does not correspond to the longest non-coding region in the genome. Unlike other studies of mt genomes, this study compares the evolutionary patterns of all available

  10. Radiation dose reduction for coronary artery calcium scoring at 320-detector CT with adaptive iterative dose reduction 3D.

    PubMed

    Tatsugami, Fuminari; Higaki, Toru; Fukumoto, Wataru; Kaichi, Yoko; Fujioka, Chikako; Kiguchi, Masao; Yamamoto, Hideya; Kihara, Yasuki; Awai, Kazuo

    2015-06-01

    To assess the possibility of reducing the radiation dose for coronary artery calcium (CAC) scoring by using adaptive iterative dose reduction 3D (AIDR 3D) on a 320-detector CT scanner. Fifty-four patients underwent routine- and low-dose CT for CAC scoring. Low-dose CT was performed at one-third of the tube current used for routine-dose CT. Routine-dose CT was reconstructed with filtered back projection (FBP) and low-dose CT was reconstructed with AIDR 3D. We compared the calculated Agatston-, volume-, and mass scores of these images. The overall percentage difference in the Agatston-, volume-, and mass scores between routine- and low-dose CT studies was 15.9, 11.6, and 12.6%, respectively. There were no significant differences in the routine- and low-dose CT studies irrespective of the scoring algorithms applied. The CAC measurements of both imaging modalities were highly correlated with respect to the Agatston- (r = 0.996), volume- (r = 0.996), and mass score (r = 0.997; p < 0.001, all); the Bland-Altman limits of agreement scores were -37.4 to 51.4, -31.2 to 36.4 and -30.3 to 40.9%, respectively, suggesting that AIDR 3D was a good alternative for FBP. The mean effective radiation dose for routine- and low-dose CT was 2.2 and 0.7 mSv, respectively. The use of AIDR 3D made it possible to reduce the radiation dose by 67% for CAC scoring without impairing the quantification of coronary calcification.

  11. Relationship between beat to beat coronary artery motion and image quality in prospectively ECG-gated two heart beat 320-detector row coronary CT angiography.

    PubMed

    Tomizawa, Nobuo; Komatsu, Shuhei; Akahane, Masaaki; Torigoe, Rumiko; Kiryu, Shigeru; Ohtomo, Kuni

    2012-01-01

    The objective was to investigate the influence of the beat-to-beat movement of the coronary arteries on image quality of multi-segment reconstruction (MSR) images. Although MSR improves temporal resolution, image quality would be degraded by beat-to-beat movement of the coronary arteries. In a retrospectively review, 18 patients (mean age, 67.0 years) who underwent coronary CT angiography using a 320-detector row CT were included. The displacement and diameter of coronary artery segments for each of the identified nine landmarks was recorded. The motion ratio was calculated as the division of displacement by diameter. Image quality (IQ) was graded by a four-point scale. The correlation between MSR IQ score and the motion ratio showed stronger negative correlation than that between MSR IQ score and the displacement (r = -0.54 vs. r = -0.36). The average motion ratio for segments in which half-scan reconstruction (HSR) IQ was better than MSR IQ (29.1%, group A) was higher than that for segments in which MSR IQ was better than HSR IQ (16.0%, group C). The motion ratio in group C was lower than 25%. Difference in IQ scores of the HSR images was more frequent in group A than in the remaining segments in which the motion ratio was lower than 25% (16.7% vs. 66.0%; P < 0.0002). The motion ratio could be a better index than the displacement to evaluate the influence of the motion of coronary arteries on image quality. MSR images would be impaired by a motion ratio larger than 25%. Image impairment of one of the HSR images might also impair MSR images.

  12. Ammonium Production off Central Chile (36°S) by Photodegradation of Phytoplankton-Derived and Marine Dissolved Organic Matter

    PubMed Central

    Rain-Franco, Angel; Muñoz, Claudia; Fernandez, Camila

    2014-01-01

    We investigated the production of ammonium by the photodegradation of dissolved organic matter (DOM) in the coastal upwelling system off central Chile (36°S). The mean penetration of solar radiation (Z1%) between April 2011 and February 2012 was 9.4 m, 4.4 m and 3.2 m for Photosynthetically Active Radiation (PAR; 400–700 nm), UV-A (320–400 nm) and UV-B (280–320 nm), respectively. Ammonium photoproduction experiments were carried out using exudates of DOM obtained from cultured diatom species (Chaetoceros muelleri and Thalassiosira minuscule) as well as natural marine DOM. Diatom exudates showed net photoproduction of ammonium under exposure to UVR with a mean rate of 0.56±0.4 µmol L−1 h−1 and a maximum rate of 1.49 µmol L−1 h−1. Results from natural marine DOM showed net photoproduction of ammonium under exposure to PAR+UVR ranging between 0.06 and 0.2 µmol L−1 h−1. We estimated the potential contribution of photochemical ammonium production for phytoplankton ammonium demand. Photoammonification of diatom exudates could support between 117 and 453% of spring-summer NH4+ assimilation, while rates obtained from natural samples could contribute to 50–178% of spring-summer phytoplankton NH4+ requirements. These results have implications for local N budgets, as photochemical ammonium production can occur year-round in the first meters of the euphotic zone that are impacted by full sunlight. PMID:24968138

  13. UV-Induced cell death in plants.

    PubMed

    Nawkar, Ganesh M; Maibam, Punyakishore; Park, Jung Hoon; Sahi, Vaidurya Pratap; Lee, Sang Yeol; Kang, Chang Ho

    2013-01-14

    Plants are photosynthetic organisms that depend on sunlight for energy. Plants respond to light through different photoreceptors and show photomorphogenic development. Apart from Photosynthetically Active Radiation (PAR; 400-700 nm), plants are exposed to UV light, which is comprised of UV-C (below 280 nm), UV-B (280-320 nm) and UV-A (320-390 nm). The atmospheric ozone layer protects UV-C radiation from reaching earth while the UVR8 protein acts as a receptor for UV-B radiation. Low levels of UV-B exposure initiate signaling through UVR8 and induce secondary metabolite genes involved in protection against UV while higher dosages are very detrimental to plants. It has also been reported that genes involved in MAPK cascade help the plant in providing tolerance against UV radiation. The important targets of UV radiation in plant cells are DNA, lipids and proteins and also vital processes such as photosynthesis. Recent studies showed that, in response to UV radiation, mitochondria and chloroplasts produce a reactive oxygen species (ROS). Arabidopsis metacaspase-8 (AtMC8) is induced in response to oxidative stress caused by ROS, which acts downstream of the radical induced cell death (AtRCD1) gene making plants vulnerable to cell death. The studies on salicylic and jasmonic acid signaling mutants revealed that SA and JA regulate the ROS level and antagonize ROS mediated cell death. Recently, molecular studies have revealed genes involved in response to UV exposure, with respect to programmed cell death (PCD).

  14. A review of the effects of agricultural and industrial contamination on the Ebro delta biota and wildlife.

    PubMed

    Mañosa, S; Mateo, R; Guitart, R

    2001-10-01

    The Ebro delta (NE Spain) is a 320 km2 wetland area of international importance for conservation. The area is devoted to rice farming and receives large amounts of pesticides. Industrial pollutants are also carried to the delta by the river. The information accumulated during the last 25 year on the effect of such pollution on the biota is reviewed in order to identify the existing gaps and needs for management. Organochlorine pesticides were legally used until 1977, which has resulted in the widespread presence of these compounds in the Ebro delta biota. Lethal, sublethal or other detrimental effects of these pesticides on wildlife in the area were poorly investigated, but negative effects on the reproduction of ducks and herons were reported. Nowadays, polychlorinated biphenyls (PCBs) are the main responsible of organochlorine pollution in the area: concentrations in biota samples are higher than levels observed in nearby coastal areas, as a result of the significant PCB inputs by the river which, in 1990, were evaluated at 126 kg yr(-1). The massive use of herbicides is thought to have contributed to the elimation of macrophyte vegetation in the lagoons during the eighties, which had strong consequences on diving ducks and coot populations. Weed control is also related to the loss of biodiversity held by rice fields. The massive and inadequate use of organophosphorus and carbamate pesticides (involving more than 20,000 t yr(-1) has produced some waterbird mortality events, and may have direct and indirect effects on other non-target organisms. The accumulation in the soil of lead pellets used in waterfowl shooting is estimated to kill some 16,300 waterbirds in the Ebro delta every year. PMID:11686200

  15. Fully 3D-Integrated Pixel Detectors for X-Rays

    SciTech Connect

    Deptuch, Grzegorz W.; Gabriella, Carini; Enquist, Paul; Grybos, Pawel; Holm, Scott; Lipton, Ronald; Maj, Piotr; Patti, Robert; Siddons, David Peter; Szczygiel, Robert; Yarema, Raymond

    2016-01-01

    The vertically integrated photon imaging chip (VIPIC1) pixel detector is a stack consisting of a 500-μm-thick silicon sensor, a two-tier 34-μm-thick integrated circuit, and a host printed circuit board (PCB). The integrated circuit tiers were bonded using the direct bonding technology with copper, and each tier features 1-μm-diameter through-silicon vias that were used for connections to the sensor on one side, and to the host PCB on the other side. The 80-μm-pixel-pitch sensor was the direct bonding technology with nickel bonded to the integrated circuit. The stack was mounted on the board using Sn–Pb balls placed on a 320-μm pitch, yielding an entirely wire-bond-less structure. The analog front-end features a pulse response peaking at below 250 ns, and the power consumption per pixel is 25 μW. We successful completed the 3-D integration and have reported here. Additionally, all pixels in the matrix of 64 × 64 pixels were responding on well-bonded devices. Correct operation of the sparsified readout, allowing a single 153-ns bunch timing resolution, was confirmed in the tests on a synchrotron beam of 10-keV X-rays. An equivalent noise charge of 36.2 e- rms and a conversion gain of 69.5 μV/e- with 2.6 e- rms and 2.7 μV/e- rms pixel-to-pixel variations, respectively, were measured.

  16. Identification of the rate-limiting step of the peroxygenase reactions catalyzed by the thermophilic cytochrome P450 from Sulfolobus tokodaii strain 7.

    PubMed

    Hayakawa, Shohei; Matsumura, Hirotoshi; Nakamura, Nobuhumi; Yohda, Masafumi; Ohno, Hiroyuki

    2014-03-01

    Cytochrome P450 from the thermoacidophilic crenarchaeon Sulfolobus tokodaii strain 7 (P450st) is a thermophilic cytochrome P450 that shows high tolerance of harsh conditions and is capable of catalyzing some peroxygenase reactions. Here, we investigated the pH dependence of the peroxygenase reactions catalyzed by wild-type P450st and a mutant in which the residues located close to the proximal heme ligand are mutated. Both hydrogen peroxide-driven ethylbenzene hydroxylation and styrene epoxidation by wild-type P450st were found to be activated in weak acidic and weak basic solutions. Under these conditions, the Michaelis constant for hydrogen peroxide (KmH2O2 ) was decreased. The turnover rate (kcat ) of ethylbenzene hydroxylation was increased and followed an S-shaped curve, with an increase in the pH value. The apparent acid dissociation constant (pKa (app) ) of the kcat was 7.0, which suggests that the rate-limiting step of this reaction is deprotonation of the Fe(III) -H2 O2 complex. By introducing a double mutation around the proximal heme ligand, the peroxygenase activity was increased over a wide pH range, and was dramatically increased at pH 5. The spectroscopic properties of this F310A/A320Q mutant indicated that the Lewis acidity of the heme was increased by this mutation. Kinetic investigations showed that the increase in the Lewis acidity of the heme facilitates the reaction rate of the rate-limiting step of peroxygenase reactions and decreases the KmH2O2 value. Differences in the pH dependence of the kcat value between wild-type P450st and the mutant suggest that the rate-limiting step switches to protonation of the ferric-hydroperoxo species (compound 0) under alkaline conditions.

  17. Impact of debris dams on hyporheic interaction along a semi-arid stream

    NASA Astrophysics Data System (ADS)

    Lautz, Laura K.; Siegel, Donald I.; Bauer, Robert L.

    2006-01-01

    Hyporheic exchange increases the potential for solute retention in streams by slowing downstream transport and increasing solute contact with the substrate. Hyporheic exchange may be a major mechanism to remove nutrients in semi-arid watersheds, where livestock have damaged stream riparian zones and contributed nutrients to stream channels. Debris dams, such as beaver dams and anthropogenic log dams, may increase hyporheic interactions by slowing stream water velocity, increasing flow complexity and diverting water to the subsurface.Here, we report the results of chloride tracer injection experiments done to evaluate hyporheic interaction along a 320 m reach of Red Canyon Creek, a second order stream in the semi-arid Wind River Range of Wyoming. The study site is part of a rangeland watershed managed by The Nature Conservancy of Wyoming, and used as a hydrologic field site by the University of Missouri Branson Geologic Field Station. The creek reach we investigated has debris dams and tight meanders that hypothetically should enhance hyporheic interaction. Breakthrough curves of chloride measured during the field experiment were modelled with OTIS-P, a one-dimensional, surface-water, solute-transport model from which we extracted the storage exchange rate and cross-sectional area of the storage zone As for hyporheic exchange. Along gaining reaches of the stream reach, short-term hyporheic interactions associated with debris dams were comparable to those associated with severe meanders. In contrast, along the non-gaining reach, stream water was diverted to the subsurface by debris dams and captured by large-scale near-stream flow paths. Overall, hyporheic exchange rates along Red Canyon Creek during snowmelt recession equal or exceed exchange rates observed during baseflow at other streams.

  18. HuntIR thermal imagers for reconnaissance and targeting applications

    NASA Astrophysics Data System (ADS)

    Breiter, Rainer; Cabanski, Wolfgang A.; Ihle, Tobias; Mauk, Karl-Heinz; Rode, Werner

    2004-08-01

    A new family of light handheld military thermal imagers for reconnaissance and targeting applications was developed based on AIM's IR components like IR detection modules, command and control electronics and image processing units. Three different types of imagers provide solutions for different requirements in identification ranges of targets. The highest performance device makes use of a FPA MCT 384x288 MWIR detector with a motorized double field of view optics. An identification range up to 2400m for the NATO standard target was proven according to the FGAN-FOM TRM3 range model. The device provides a mechanical adaptation to weapon systems and provides target markers for common hand weapons of the German army. A single field of view MCT device for 1000m ranges and an uncooled device on the lower performance end complete the imager family. Electronics for intelligent power management from batteries and display electronics were developed to provide stand alone operation. The modular concept allows the use of the same image processing unit for all devices providing special features for best performance like scene-based non-uniformity correction together with an optical calibration element and dynamic reduction including automatic histogram equalization for optimized scene display and text or graphics overlay. Due to the modular concept the components like the image processing unit are already used and validated in programs like the thermal sight for the self defense gun of the reconnaissance vehicle FENNEK together with a 320x240 LWIR uncooled microbolometer detector or with the MCT 384x288 MWIR detection module in a thermal imager for the German army UAV Luna.

  19. Shallow seismic study of the geothermal areas in the Gülbahçe Bay and İzmir Gulf (Aegean Sea, Western Turkey)

    NASA Astrophysics Data System (ADS)

    Altan, Zehra; Ocakoǧlu, Neslihan

    2016-09-01

    The two seismic units, i.e., the basement and the basin sediments are interpreted as Miocene and Plio-Quaternary deposits, respectively. The basin sediments of approximately 255 m thickness are risen and compressed through the active strike-slip faults, GF1-GF3 extending in N-S direction towards the outer Gülbahçe Bay. These compressed sediments are interpreted as upwelling zones with weak reflection character and internal frequency attenuation. The most significant one is marked as a possible mud diaper zone with a ~320 m width and the approximately 500 m. A synthetic model of the field data gathered from the diaper indicates that the top of the diapir is characterised by a strong positive reflection character while the internal diaper is represented by polarity reversals and weak reflections due to a velocity decrease with depth. Moreover, phase changes are observed at the border of the diapiric structure. A relatively thicker basin sediment unit of approximately 700 m was observed on the pro-delta sediments of the Gediz River and the sediments below in the İzmir Gulf. The active strike-slip faults, İF1-İF5 deform the basement and basin deposits. Moreover, two active normal faults, İF6 and İF7 are marked from inner to outer part of the gulf. The seismic attribute sections indicate weak reflection zones and frequency attenuation particularly both inside the pro-delta sediments and the sediments below. Observations suggest to us the existence of possible fluid and/or gas discharges and saturations in the Gülbahçe Bay and İzmir Gulf.

  20. Paleoceanographic history of the Lower Bengal Fan during the last glacial cycle - IODP Expedition 354

    NASA Astrophysics Data System (ADS)

    Dekens, P. S.; Weber, M. E.; Lantzsch, H.; Das, S. K.; Williams, T.; Adhikari, R. R.; Jia, G.; Fox, L. R.; Ge, J.; Manoj, M. C.; Savian, J. F.; Reilly, B. T.; Selkin, P. A.; Meynadier, L.; Spiess, V.; France-Lanord, C.; Sharma, B.

    2015-12-01

    IODP Expedition 354 drilled a ~320 km long transect of seven sites on the Lower Bengal Fan at 8o N in the Northern Indian Ocean. The sediments cores recovered record a complex relationship between turbiditic and hemipelagic environments. This variability offers a unique opportunity to link our understanding of tectonic and terrestrial processes with climate and oceanography. With the exception the westernmost Site U1454, all sites show a several meter thick, hemipelagic top layer, usually representing Late Quaternary sediment. We present physical, geochemical and stable isotopic properties of this interval to establish a time frame and assess the paleoceanographic development of the region during the last glacial cycle. We sampled Site U1452C-1H continuously for the uppermost 480 cm of hemipelagic sediment in 2-cm increments. Preliminary results indicate the Toba Ash 1 (0.74 ka) is a distinct time marker in all physical properties. Furthermore, wet-bulk density as well as color reflectance b* (the red-green component) and L* (the lightness) show a dominant precession cyclicity. Hence, we are able to provide an insolation-tuned chronology for the last 200 ka (MIS1 - 7) as a preliminary age model. These records agree well with d18O records retrieved from Chinese caves. We will present a preliminary paleoceanographic proxy data to reconstruct sea-surface temperature (SST), sea-surface salinity (SSS), ice volume, marine biological productivity, nutrient supply, and deep-water circulation. These oceanographic and climate conditions are linked to changes in monsoonal strength and terrestrial input using sedimentary proxies to reconstruct chemical weathering and sediment sources and transport time. This work addresses one of the primary cruise objectives - linking monsoon variability, regional and global climate, and Bay of Bengal sediment deposition.

  1. Low-power, real-time digital video stabilization using the HyperX parallel processor

    NASA Astrophysics Data System (ADS)

    Hunt, Martin A.; Tong, Lin; Bindloss, Keith; Zhong, Shang; Lim, Steve; Schmid, Benjamin J.; Tidwell, J. D.; Willson, Paul D.

    2011-06-01

    Coherent Logix has implemented a digital video stabilization algorithm for use in soldier systems and small unmanned air / ground vehicles that focuses on significantly reducing the size, weight, and power as compared to current implementations. The stabilization application was implemented on the HyperX architecture using a dataflow programming methodology and the ANSI C programming language. The initial implementation is capable of stabilizing an 800 x 600, 30 fps, full color video stream with a 53ms frame latency using a single 100 DSP core HyperX hx3100TM processor running at less than 3 W power draw. By comparison an Intel Core2 Duo processor running the same base algorithm on a 320x240, 15 fps stream consumes on the order of 18W. The HyperX implementation is an overall 100x improvement in performance (processing bandwidth increase times power improvement) over the GPP based platform. In addition the implementation only requires a minimal number of components to interface directly to the imaging sensor and helmet mounted display or the same computing architecture can be used to generate software defined radio waveforms for communications links. In this application, the global motion due to the camera is measured using a feature based algorithm (11 x 11 Difference of Gaussian filter and Features from Accelerated Segment Test) and model fitting (Random Sample Consensus). Features are matched in consecutive frames and a control system determines the affine transform to apply to the captured frame that will remove or dampen the camera / platform motion on a frame-by-frame basis.

  2. Oxytocin and vasopressin receptor gene variation as a proximate base for inter- and intraspecific behavioral differences in bonobos and chimpanzees.

    PubMed

    Staes, Nicky; Stevens, Jeroen M G; Helsen, Philippe; Hillyer, Mia; Korody, Marisa; Eens, Marcel

    2014-01-01

    Recent literature has revealed the importance of variation in neuropeptide receptor gene sequences in the regulation of behavioral phenotypic variation. Here we focus on polymorphisms in the oxytocin receptor gene (OXTR) and vasopressin receptor gene 1a (Avpr1a) in chimpanzees and bonobos. In humans, a single nucleotide polymorphism (SNP) in the third intron of OXTR (rs53576 SNP (A/G)) is linked with social behavior, with the risk allele (A) carriers showing reduced levels of empathy and prosociality. Bonobos and chimpanzees differ in these same traits, therefore we hypothesized that these differences might be reflected in variation at the rs53576 position. We sequenced a 320 bp region surrounding rs53576 but found no indications of this SNP in the genus Pan. However, we identified previously unreported SNP variation in the chimpanzee OXTR sequence that differs from both humans and bonobos. Humans and bonobos have previously been shown to have a more similar 5' promoter region of Avpr1a when compared to chimpanzees, who are polymorphic for the deletion of ∼ 360 bp in this region (+/- DupB) which includes a microsatellite (RS3). RS3 has been linked with variation in levels of social bonding, potentially explaining part of the interspecies behavioral differences found in bonobos, chimpanzees and humans. To date, results for bonobos have been based on small sample sizes. Our results confirmed that there is no DupB deletion in bonobos with a sample size comprising approximately 90% of the captive founder population, whereas in chimpanzees the deletion of DupB had the highest frequency. Because of the higher frequency of DupB alleles in our bonobo population, we suggest that the presence of this microsatellite may partly reflect documented differences in levels of sociability found in bonobos and chimpanzees. PMID:25405348

  3. Toward an organ based dose prescription method for the improved accuracy of murine dose in orthovoltage x-ray irradiators

    PubMed Central

    Belley, Matthew D.; Wang, Chu; Nguyen, Giao; Gunasingha, Rathnayaka; Chao, Nelson J.; Chen, Benny J.; Dewhirst, Mark W.; Yoshizumi, Terry T.

    2014-01-01

    Purpose: Accurate dosimetry is essential when irradiating mice to ensure that functional and molecular endpoints are well understood for the radiation dose delivered. Conventional methods of prescribing dose in mice involve the use of a single dose rate measurement and assume a uniform average dose throughout all organs of the entire mouse. Here, the authors report the individual average organ dose values for the irradiation of a 12, 23, and 33 g mouse on a 320 kVp x-ray irradiator and calculate the resulting error from using conventional dose prescription methods. Methods: Organ doses were simulated in the Geant4 application for tomographic emission toolkit using the MOBY mouse whole-body phantom. Dosimetry was performed for three beams utilizing filters A (1.65 mm Al), B (2.0 mm Al), and C (0.1 mm Cu + 2.5 mm Al), respectively. In addition, simulated x-ray spectra were validated with physical half-value layer measurements. Results: Average doses in soft-tissue organs were found to vary by as much as 23%–32% depending on the filter. Compared to filters A and B, filter C provided the hardest beam and had the lowest variation in soft-tissue average organ doses across all mouse sizes, with a difference of 23% for the median mouse size of 23 g. Conclusions: This work suggests a new dose prescription method in small animal dosimetry: it presents a departure from the conventional approach of assigning a single dose value for irradiation of mice to a more comprehensive approach of characterizing individual organ doses to minimize the error and uncertainty. In human radiation therapy, clinical treatment planning establishes the target dose as well as the dose distribution, however, this has generally not been done in small animal research. These results suggest that organ dose errors will be minimized by calibrating the dose rates for all filters, and using different dose rates for different organs. PMID:24593746

  4. Toward a single-chip TECless/NUCless InGaAs SWIR camera with 120-dB intrinsic operation dynamic range

    NASA Astrophysics Data System (ADS)

    Ni, Y.; Arion, B.; Zhu, Y. M.; Potet, P.; Huet, Odile; Reverchon, Jean Luc; Truffer, Jean Patrick; Robo, Jean Alexandre; Costard, Eric

    2011-06-01

    This paper describes a single-chip InGaAs SWIR camera with more than 120dB instant operational dynamic range with an innovative CMOS ROIC technology, so called MAGIC, invented and patented by New Imaging Technologies. A 320x256- pixel InGaAs 25μm pitch photodiode array, designed and fabricated by III-Vlab/Thales Research & Technology(TRT), has been hybridized on this new generation CMOS ROIC. With NIT's MAGIC technology, the sensor's output follows a precise logarithmic law in function of incoming photon flux and gives instant operational dynamic range (DR) better than 120 dB. The ROIC incorporates the entire video signal processing function including a CCIR TV encoder, so a complete SWIR InGaAs camera with standard video output has been realized on a single 30x30 mm2 PCB board with ¼ W power consumption. Neither TEC nor NUC is needed from room temperature operation. The camera can be switched on and off instantly, ideal for all the portable battery operated SWIR band observation applications. The measured RMS noise and FPN noise on the prototype sensor in dark conditions are 0.4 mV and 0.27 mV respectively. The signal excursion from pixel is about 300mV over the 120 dB dynamic range. The FPN remains almost constant over the whole operation dynamic range. The NEI has been measured to be 3,71E+09 ph/s/cm2 with 92 equivalent noise photons at 25Hz frame rate, better than the same architecture of InGaAs photodiode array hybridized on an Indigo ROIC ISC9809 with a pitch of 30 μm for which a readout noise of 120 electrons is observed.

  5. A low-noise laser-gated imaging system for long-range target identification

    NASA Astrophysics Data System (ADS)

    Baker, Ian M.; Duncan, Stuart S.; Copley, Jeremy W.

    2004-08-01

    BAE SYSTEMS has developed a laser-illuminated, gated imaging system for long range target identification which has generated bright images at ranges in excess of 10km from modest laser energies. The system is based on a short pulsewidth laser and a custom detector for sensing the return pulse. The source is a Nd YAG laser converted by an optical parametric oscillator (OPO) to 1571nm and producing 20ns pulses at 15Hz. The detector (named SWIFT) is a 320x256 array of HgCdTe photodiodes operating with high avalanche gain to achieve sensitivities as low as 10 photon rms. A custom silicon multiplexer performs the signal injection and temporal gating function, and adds additional electronic gain. Trials show that the current detectors have gate edges equivalent to 1.5m in range and complete extinction of signals outside of the gated range. The detector is encapsulated in an integrated-detector-cooler-assembly and utilises standard productionised thermal imaging electronics to perform non-uniformity correction and grey scale images. Imaging trials using the camera have shown little excess noise, crosstalk or non-uniformity due to the use of avalanching in the HgCdTe photodiodes up to gains of over 100. The images have shown high spatial resolution arising from the use of solid state focal plane array technology. The imagery, collected both in the laboratory and in field trials, has been used to explore the phenomenology unique to laser-illuminated targets and to verify system models.

  6. Responses of a marine red tide alga Skeletonema costatum (Bacillariophyceae) to long-term UV radiation exposures.

    PubMed

    Wu, Hongyan; Gao, Kunshan; Wu, Haiyan

    2009-02-01

    UV radiation (280-400 nm) is known to affect phytoplankton in negative, neutral and positive ways depending on the species or levels of irradiation energy. However, little has been documented on how photosynthetic physiology and growth of red tide alga respond to UVR in a long-term period. We exposed the cells of the marine red tide diatom Skeletonema costatum for 6 days to simulated solar radiations with UV-A (320-400 nm) or UV-A+UV-B (295-400 nm) and examined their changes in photosynthesis and growth. Presence of UV-B continuously reduced the effective photosynthetic quantum yield of PSII, and resulted in complete growth inhibition and death of cells. When UV-B or UV-B+UV-A was screened off, the growth rate decreased initially but regained thereafter. UV-absorbing compounds and carotenoids increased in response to the exposures with UVR. However, mechanisms for photoprotection associated with the increased carotenoids or UV-absorbing compounds were not adequate under the continuous exposure to a constant level of UV-B (0.09 Wm(-2), DNA-weighted). In contrast, under solar radiation screened off UV-B, the photoprotection was first accomplished by an initial increase of carotenoids and a later increase in UV-absorbing compounds. The overall response of this red tide alga to prolonged UV exposures indicates that S. costatum is a UV-B-sensitive species and increased UV-B irradiance would influence the formation of its blooms.

  7. Toward an organ based dose prescription method for the improved accuracy of murine dose in orthovoltage x-ray irradiators

    SciTech Connect

    Belley, Matthew D.; Wang, Chu; Nguyen, Giao; Gunasingha, Rathnayaka; Chao, Nelson J.; Chen, Benny J.; Dewhirst, Mark W.; Yoshizumi, Terry T.

    2014-03-15

    Purpose: Accurate dosimetry is essential when irradiating mice to ensure that functional and molecular endpoints are well understood for the radiation dose delivered. Conventional methods of prescribing dose in mice involve the use of a single dose rate measurement and assume a uniform average dose throughout all organs of the entire mouse. Here, the authors report the individual average organ dose values for the irradiation of a 12, 23, and 33 g mouse on a 320 kVp x-ray irradiator and calculate the resulting error from using conventional dose prescription methods. Methods: Organ doses were simulated in the Geant4 application for tomographic emission toolkit using the MOBY mouse whole-body phantom. Dosimetry was performed for three beams utilizing filters A (1.65 mm Al), B (2.0 mm Al), and C (0.1 mm Cu + 2.5 mm Al), respectively. In addition, simulated x-ray spectra were validated with physical half-value layer measurements. Results: Average doses in soft-tissue organs were found to vary by as much as 23%–32% depending on the filter. Compared to filters A and B, filter C provided the hardest beam and had the lowest variation in soft-tissue average organ doses across all mouse sizes, with a difference of 23% for the median mouse size of 23 g. Conclusions: This work suggests a new dose prescription method in small animal dosimetry: it presents a departure from the conventional approach of assigninga single dose value for irradiation of mice to a more comprehensive approach of characterizing individual organ doses to minimize the error and uncertainty. In human radiation therapy, clinical treatment planning establishes the target dose as well as the dose distribution, however, this has generally not been done in small animal research. These results suggest that organ dose errors will be minimized by calibrating the dose rates for all filters, and using different dose rates for different organs.

  8. Sulfamic Acid-Catalyzed Lead Perovskite Formation for Solar Cell Fabrication on Glass or Plastic Substrates.

    PubMed

    Guo, Yunlong; Sato, Wataru; Shoyama, Kazutaka; Nakamura, Eiichi

    2016-04-27

    Lead perovskite materials such as methylammonium triiodoplumbate(II) (CH3NH3PbI3, PV) are promising materials for printable solar cell (SC) applications. The preparation of PV involves a series of energetically costly cleavages of the μ-iodo bridges via conversion of a mixture of PbI2 (PI) and methylammonium iodide (CH3NH3I, MAI) in N,N-dimethylformamide (DMF) into a precursor solution containing a polymeric strip of a plumbate(II) dimer [(MA(+))2(PbI3(-))2·(DMF)2]m, which then produces a perovskite film with loss of DMF upon spin-coating and heating of the substrate. We report here that the PI-to-PV conversion and the PV crystal growth to micrometer size can be accelerated by a small amount of zwitterionic sulfamic acid (NH3SO3, SA) and that sulfamic acid facilitates electron transfer to a neighboring electron-accepting layer in an SC device. As a result, an SC device on indium tin oxide (ITO)/glass made of a 320 nm thick PV film using 0.7 wt % SA showed a higher short-circuit current, open-circuit voltage, and fill factor and hence a 22.5% higher power conversion efficiency of 16.02% compared with the device made without SA. The power conversion efficiency value was reproducible (±0.3% for 25 devices), and the device showed very small hysteresis. The device without any encapsulation showed a respectable longevity on a shelf under nitrogen under ambient light. A flexible device similarly fabricated on ITO/poly(ethylene naphthalate) showed an efficiency of 12.4%. PMID:27054265

  9. SU-E-I-28: Introduction and Investigation of Effective Diameter Ratios as a New Patient Size Metric for Use in CT

    SciTech Connect

    Lamoureux, R; Sinclair, L; Mench, A; Lipnharski, I; Carranza, C; Bidari, S; Cormack, B; Rill, L; Arreola, M

    2015-06-15

    Purpose: To introduce and investigate effective diameter ratios as a new patient metric for use in computed tomography protocol selection as a supplement to patient-specific size parameter data. Methods: The metrics of outer effective diameter and inner effective diameter were measured for 7 post-mortem subjects scanned with a standardized chest/abdomen/pelvis (CAP) protocol on a 320-slice MDCT scanner. The outer effective diameter was calculated by obtaining the anterior/posterior and lateral dimensions of the imaged anatomy at the middle of the scan range using Effective Diameter= SQRT(AP height*Lat Width). The inner effective diameter was calculated with the same equation using the AP and Lat dimensions of the anatomy excluding the adipose tissue. The ratio of outer to inner effective diameter was calculated for each subject. A relationship to BMI, weight, and CTDI conversion coefficients was investigated. Results: For the largest subject with BMI of 43.85 kg/m2 and weight of 255 lbs the diameter ratio was calculated as 1.33. For the second largest subject with BMI of 33.5 kg/m2 and weight of 192.4 lbs the diameter ratio was measured as 1.43, indicating a larger percentage of adipose tissue in the second largest subject’s anatomical composition. For the smallest subject at BMI of 17.4 kg/m2 and weight of 86 lbs a similar tissue composition was indicated as a subject with BMI of 24.2 kg/m2 and weight of 136 lbs as they had the same diameter ratios of 1.11. Conclusion: The diameter ratio proves to contain information about anatomical composition that the BMI and weight alone do not. The utility of this metric is still being examined but could prove useful for determining MDCT techniques and for giving a more in depth detail of the composition of a patient’s body habitus.

  10. Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry

    SciTech Connect

    Trattner, Sigal; Cheng, Bin; Pieniazek, Radoslaw L.; Hoffmann, Udo; Douglas, Pamela S.; Einstein, Andrew J.

    2014-04-15

    Purpose: Effective dose (ED) is a widely used metric for comparing ionizing radiation burden between different imaging modalities, scanners, and scan protocols. In computed tomography (CT), ED can be estimated by performing scans on an anthropomorphic phantom in which metal-oxide-semiconductor field-effect transistor (MOSFET) solid-state dosimeters have been placed to enable organ dose measurements. Here a statistical framework is established to determine the sample size (number of scans) needed for estimating ED to a desired precision and confidence, for a particular scanner and scan protocol, subject to practical limitations. Methods: The statistical scheme involves solving equations which minimize the sample size required for estimating ED to desired precision and confidence. It is subject to a constrained variation of the estimated ED and solved using the Lagrange multiplier method. The scheme incorporates measurement variation introduced both by MOSFET calibration, and by variation in MOSFET readings between repeated CT scans. Sample size requirements are illustrated on cardiac, chest, and abdomen–pelvis CT scans performed on a 320-row scanner and chest CT performed on a 16-row scanner. Results: Sample sizes for estimating ED vary considerably between scanners and protocols. Sample size increases as the required precision or confidence is higher and also as the anticipated ED is lower. For example, for a helical chest protocol, for 95% confidence and 5% precision for the ED, 30 measurements are required on the 320-row scanner and 11 on the 16-row scanner when the anticipated ED is 4 mSv; these sample sizes are 5 and 2, respectively, when the anticipated ED is 10 mSv. Conclusions: Applying the suggested scheme, it was found that even at modest sample sizes, it is feasible to estimate ED with high precision and a high degree of confidence. As CT technology develops enabling ED to be lowered, more MOSFET measurements are needed to estimate ED with the same

  11. Enhanced joint spectral and time domain optical coherence tomography for quantitative flow velocity measurement

    NASA Astrophysics Data System (ADS)

    Walther, Julia; Koch, Edmund

    2011-06-01

    Recently, a new method called joint spectral and time domain optical coherence tomography (STdOCT) for flow velocity measurement in spectral domain OCT (SD OCT) was presented. This method analyzes the detected timeresolved interference fringe spectra by using a two-dimensional fast Fourier transformation (2D FFT) to determine directly the Doppler frequency shift instead of calculating the phase difference at each depth position of adjacent A-scans. There, it was found that STdOCT is more robust for measurements with low signal to noise ratio than the classic phase-resolved Doppler OCT (DOCT) making it attractive first for imaging fast flow velocities at which a strong Doppler angle dependent signal damping occurs due to interference fringe washout and second for investigating large blood vessels with a big diameter and a highly damped signal of blood with increasing depth due to strong scattering and absorption in the near-infrared wavelength range. In the present study, we would like to introduce an enhanced algorithm for STdOCT permitting a more precise flow velocity measurement in comparison to the conventional STdOCT. The new method determines the amplitude of the broadened Doppler frequency shift by calculating the center of gravity via the complex analytical signal as a result of the second FFT instead of detecting the maximum intensity signal. Furthermore, the comparison with phase-resolved DOCT was done experimentally by using a flow phantom consisting of a 1% Intralipid emulsion and a 320 μm glass capillary. As a result, the enhanced STdOCT and DOCT processed data are completely equivalent.

  12. Row orientation effect on UV-B, UV-A and PAR solar irradiation components in vineyards at Tuscany, Italy

    NASA Astrophysics Data System (ADS)

    Grifoni, D.; Carreras, G.; Zipoli, G.; Sabatini, F.; Dalla Marta, A.; Orlandini, S.

    2008-11-01

    Besides playing an essential role in plant photosynthesis, solar radiation is also involved in many other important biological processes. In particular, it has been demonstrated that ultraviolet (UV) solar radiation plays a relevant role in grapevines ( Vitis vinifera) in the production of certain important chemical compounds directly responsible for yield and wine quality. Moreover, the exposure to UV-B radiation (280-320 nm) can affect plant-disease interaction by influencing the behaviour of both pathogen and host. The main objective of this research was to characterise the solar radiative regime of a vineyard, in terms of photosynthetically active radiation (PAR) and UV components. In this analysis, solar spectral UV irradiance components, broadband UV (280-400 nm), spectral UV-B and UV-A (320-400 nm), the biological effective UVBE, as well as the PAR (400-700 nm) component, were all considered. The diurnal patterns of these quantities and the UV-B/PAR and UV-B/UV-A ratios were analysed to investigate the effect of row orientation of the vineyard in combination with solar azimuth and elevation angles. The distribution of PAR and UV irradiance at various heights of the vertical sides of the rows was also studied. The results showed that the highest portion of plants received higher levels of daily radiation, especially the UV-B component. Row orientation of the vines had a pronounced effect on the global PAR received by the two sides of the rows and, to a lesser extent, UV-A and UV-B. When only the diffused component was considered, this geometrical effect was greatly attenuated. UV-B/PAR and UV-A/PAR ratios were also affected, with potential consequences on physiological processes. Because of the high diffusive capacity of the UV-B radiation, the UV-B/PAR ratio was significantly lower on the plant portions exposed to full sunlight than on those in the shade.

  13. Multiplex polymerase chain reaction analysis of UV-A- and UV-B-induced delayed and early mutations in V79 Chinese hamster cells.

    PubMed

    Dahle, Jostein; Noordhuis, Paul; Stokke, Trond; Svendsrud, Debbie Hege; Kvam, Egil

    2005-01-01

    We previously reported that approximately 10% of V79 Chinese hamster fibroblast populations clonally derived from single cells immediately after irradiation with either ultraviolet B (UV-B, 290-320 nm, mainly 311 nm) or ultraviolet A (UV-A, 320-400 nm, mainly 350-390 nm) radiation exhibit genomic instability. The instability is revealed by relatively high mutation frequencies in the hypoxanthine phosphoribosyl transferase (hprt) gene up to 23 cell generations after irradiation. These delayed mutant clones exhibited higher levels of oxidative stress than normal cells. Therefore, persistently increased oxidative stress has been proposed as a mechanism for UV-induced genomic instability. This study investigates whether this mechanism is reflected in the deletion spectrum of delayed mutant clones. Eighty-eight percent of the delayed mutant clones derived from UV-A-irradiated populations were found to have total deletion of the hprt gene. Correspondingly, 81% of UV-A-induced early mutations (i.e. detected shortly after irradiation) also had total deletions. Among delayed UV-B-induced mutant clones, 23% had total deletions and 8% had deletion of one exon, whereas all early UV-B events were either point mutations or small deletions or insertions. In conclusion, the multiplex polymerase chain reaction deletion screen showed that there were explicit differences in the occurrence of large gene alterations between early and delayed mutations induced by UV-B radiation. For UV-A radiation the deletion spectra were similar for delayed and early mutations. UV-A radiation is, in contrast to UV-B radiation, only weakly absorbed by DNA and probably induces mutation almost solely via production of reactive oxygen species. Therefore, the present results support the hypothesis that persistent increase in oxidative stress is involved in the mechanism of UV-induced genomic instability.

  14. Influence of temperature and UVR on photosynthesis and morphology of four species of cyanobacteria.

    PubMed

    Giordanino, M Valeria Fiorda; Strauch, Sebastian M; Villafañe, Virginia E; Helbling, E Walter

    2011-04-01

    During the late austral spring of 2009 we carried out experiments (4days of duration) with four cyanobacteria species, Anabaena sp., Nostoc sp., Arthrospira platensis and Microcystis sp., to assess the combined effects of temperature and solar radiation on photosynthesis performance and morphology. Two experimental temperatures (18°C and 23°C, simulating a 5°C increase under a scenario of climate change) and three radiation treatments (by using different filters/materials) were implemented: (i) P (PAR, 400-700nm), (ii) PA (PAR+UV-A, 320-700nm) and, (iii) PAB (PAR+UV-A+UV-B, 280-700nm). In general, samples under the P treatment had less decrease/higher recovery rates of effective photochemical quantum yield (Y) than those receiving UV-A or UV-A+UV-B. The effects of increased temperature were species-specific: At the end of the experiments, it was seen that increased temperature benefited photosynthetic performance of Anabaena sp. and Nostoc sp. but not of Microcystis sp. and A. platensis. Higher temperature was also associated to an increase in the chain area of Anabaena sp., and to bigger trichomes in A. platensis; however, no morphological effects were observed in Microcystis sp. In addition, in Nostoc sp. the increase in temperature counteracted the UVR impact on the reduction of the chain area. How these effects and mechanisms will affect the trophodynamics and production of aquatic ecosystems is still uncertain, but the specificity of the responses suggests that not all cyanobacteria would be equally benefited by temperature increases therefore affecting the balance and interaction among species in the water column. PMID:21296589

  15. Photochemical chlorine activation from artificial saline snowpacks

    NASA Astrophysics Data System (ADS)

    Wren, Sumi; Donaldson, James; Abbatt, Jon

    2013-04-01

    Halogen activation on snow and ice substrates has a profound influence on the oxidative capacity of the polar boundary layer. The release of reactive chlorine species is of particular interest since chlorine atoms can participate in both ozone depletion and hydrocarbon oxidation. However, the mechanisms by which halides in sea ice substrates are converted into reactive halogen species are not well understood. In this study we investigated the activation of halogens from artificial saline snow in the presence of light and ozone. Gas phase Cl2, BrCl and Br2 were detected using a chemical ionization mass spectrometer. We observe the dark release of Br2 in the presence of ozone; BrCl and Cl2 are only observed in the presence of both ozone and light. Interestingly, photo-induced release of halogens is still seen when a 320 nm or a 380 nm long-pass filter is placed in the light path. The observed halogen release is consistent with the chemistry occurring in a concentrated brine located at the surface of the snow grains. Results suggest that smaller snow grains, which present a larger total snow surface area, enhance chlorine production to a greater extent than BrCl or Br2 production. Chlorine production is shown to be strongly pH dependent, with higher chlorine yields under acidic conditions. Overall the results indicate that a mechanism involving UV-A light and ozone leads to accelerated halogen activation, which may be particularly important for releasing chlorine from bromide-depleted snow.

  16. A thermographic study on eyes affected by Age-related Macular Degeneration: Comparison among various forms of the pathology and analysis of risk factors

    NASA Astrophysics Data System (ADS)

    Matteoli, Sara; Finocchio, Lucia; Biagini, Ilaria; Giacomelli, Giovanni; Sodi, Andrea; Corvi, Andrea; Virgili, Gianni; Rizzo, Stanislao

    2016-05-01

    The aims of this study are to investigate (1) the ocular thermographic profiles in eyes affected by Age related Macular Degeneration (AMD) and age-matched controls to detect possible hemodynamic abnormalities that could be involved in the pathogenesis of the disease, (2) whether any risk factors associated with the disease could affect the development of a form of AMD rather than another. Thirty-four eyes with Age-Related Maculopathy (ARM), 41 eyes with dry AMD, 60 eyes affected by wet AMD, and 74 eyes with fibrotic AMD were included in the study. The control group consisted of 48 healthy eyes. Exclusion criteria were represented by any other ocular diseases other than AMD, tear film abnormalities, systemic cardiovascular abnormalities, systemic diseases and a body temperature higher than 37.5 °C. A total of 210 eyes without pupil dilation were investigated by infrared thermography (FLIR A320). The Ocular Surface Temperature (OST) of five ocular areas was calculated by means of an image processing technique from the infrared images. Two-sample t-test, one-way ANOVA test and multivariate analysis were used for statistical analyses. ANOVA analyses showed no significant differences among AMD groups (P-value > 0.05), however, OST in AMD patients was significantly lower than in controls (P-value < 0.0001). Smokers showed higher possibility (P-value = 0.012) of developing wet AMD instead of dry AMD. Infrared thermography may be a helpful, non-invasive and not time-consuming method to be used in the management of patients with this common degenerative maculopathy.

  17. Evaluation of Size Correction Factor for Size-specific Dose Estimates (SSDE) Calculation.

    PubMed

    Mizonobe, Kazufusa; Shiraishi, Yuta; Nakano, Satoshi; Fukuda, Chiaki; Asanuma, Osamu; Harada, Kohei; Date, Hiroyuki

    2016-09-01

    American Association of Physicists in Medicine (AAPM) Report No.204 recommends the size-specific dose estimates (SSDE), wherein SSDE=computed tomography dose index-volume (CTDIvol )×size correction factor (SCF), as an index of the CT dose to consider patient thickness. However, the study on SSDE has not been made yet for area detector CT (ADCT) device such as a 320-row CT scanner. The purpose of this study was to evaluate the SCF values for ADCT by means of a simulation technique to look into the differences in SCF values due to beam width. In the simulation, to construct the geometry of the Aquilion ONE X-ray CT system (120 kV), the dose ratio and the effective energies were measured in the cone angle and fan angle directions, and these were incorporated into the simulation code, Electron Gamma Shower Ver.5 (EGS5). By changing the thickness of a PMMA phantom from 8 cm to 40 cm, CTDIvol and SCF were determined. The SCF values for the beam widths in conventional and volume scans were calculated. The differences among the SCF values of conventional, volume scans, and AAPM were up to 23.0%. However, when SCF values were normalized in a phantom of 16 cm diameter, the error tended to decrease for the cases of thin body thickness, such as those of children. It was concluded that even if beam width and device are different, the SCF values recommended by AAPM are useful in clinical situations. PMID:27647595

  18. Effects of surface grinding conditions on the reciprocating friction and wear behavior of silicon nitride

    SciTech Connect

    Blau, P.J.; Martin, R.L.; Zanoria, E.S.

    1997-12-31

    The relationship between two significantly different surface grinding conditions and the reciprocating ball-on-flat friction and wear behavior of a high-quality, structural silicon nitride material (GS-44) was investigated. The slider materials were silicon nitride NBD 200 and 440C stainless steel. Two machining conditions were selected based on extensive machining and flexural strength test data obtained under the auspices of an international, interlaboratory grinding study. The condition categorized as {open_quotes}low strength{close_quote} grinding used a coarse 80 grit wheel and produced low flexure strength due to machining-induced flaws in the surface. The other condition, regarded as {open_quotes}high strength grinding,{close_quotes} utilized a 320 grit wheel and produced a flexural strength nearly 70% greater. Grinding wheel surface speeds were 35 and 47 m/s. Reciprocating sliding tests were conducted following the procedure described in a newly-published ASTM standard (G- 133) for linearly-reciprocating wear. Tests were performed in directions both parallel and perpendicular to the grinding marks (lay) using a 25 N load, 5 Hz reciprocating frequency, 10 mm stroke length, and 100 m of sliding at room temperature. The effects of sliding direction relative to the lay were more pronounced for stainless steel than for silicon nitride sliders. The wear of stainless steel was less than the wear of the silicon nitride slider materials because of the formation of transfer particles which covered the sharp edges of the silicon nitride grinding grooves and reduced abrasive contact. The wear of the GS-44 material was much greater for the silicon nitride sliders than for the stainless steel sliders. The causes for the effects of surface-grinding severity and sliding direction on friction and wear of GS-44 and its counterface materials are explained.

  19. Influence of difference in cross-sectional dose profile in a CTDI phantom on X-ray CT dose estimation: a Monte Carlo study.

    PubMed

    Haba, Tomonobu; Koyama, Shuji; Ida, Yoshihiro

    2014-01-01

    The longitudinal dose profile in a computed tomography dose index (CTDI) phantom had been studied by many researchers. The cross-sectional dose profile in the CTDI phantom, however, has not been studied. It is also important to understand the cross-sectional dose profile in the CTDI phantom for dose estimation in X-ray CT. In this study, the cross-sectional dose profile in the CTDI phantom was calculated by use of a Monte Carlo (MC) simulation method. A helical or a 320-detector-row cone-beam X-ray CT scanner was simulated. The cross-sectional dose profile in the CTDI phantom from surface to surface through the center point was calculated by MC simulation. The shape of the calculation region was a cylinder of 1-mm-diameter. The length of the cylinder was 23, 100, or 300 mm to represent various CT ionization chamber lengths. Detailed analyses of the energy depositions demonstrated that the cross-sectional dose profile was different in measurement methods and phantom sizes. In this study, we also focused on the validation of the weighting factor used in weighted CTDI (CTDI w ). As it stands now, the weighting factor used in CTDI w is (1/3, 2/3) for the (central, peripheral) axes. Our results showed that an equal weighting factor, which is (1/2, 1/2) for the (central, peripheral) axes, is more suitable to estimate the average cross-sectional dose when X-ray CT dose estimation is performed.

  20. Hyperspectral and gated ICCD imagery for laser irradiated carbon materials

    NASA Astrophysics Data System (ADS)

    Roberts, Charles D.; Acosta, Roberto A.; Marciniak, Michael A.; Perram, Glen P.

    2013-02-01

    New optical diagnostics for studying laser ablation and induced combustion for carbon materials are key to monitoring the evolving, spatial distribution of the gas plume. We are developing high speed imaging FTIR and gated ICCD imagery for materials processing, manufacture process control, and high energy laser applications. The results from two projects will be discussed. First, an imaging Fourier Transform Spectrometer with a 320 x 256 InSb focal plane array frames at 1.9 kHz with a spatial resolution of 1 mm and spectral resolution of up to 0.25 cm-1. Gas phase plumes above the surface of laser-irradiated black plexiglass, fiberglass and painted thin metals have been spectrally resolved. Molecular emission from CO, CO2, H2O, and hydrocarbons is readily identified. A line-by-line radiative transfer model is used to derive movies for specie concentrations and temperatures. Second, excimer laser pulsed ablation of bulk graphite into low-pressure (0.05 - 1 Torr) argon generates highly ionized, high speed (M>40) plumes. A gated, intensified CCD camera with band pass filtering has been used to generate plume imagery with temporal resolution of 10ns. The Sedov-Taylor shock model characterizes the propagation of the shock front if the dimensionality of the plume is allowed to deviate from ideal spherical expansion. A drag model is more appropriate when the plume approaches extinction (~10 μs) and extends the characterization into the far field. Conversion of laser pulse energy to the shock is efficient.

  1. [Effect of irradiation with dental polymerized lamps on human Langerhans cells: a study made on human skin transplanted to nude mice].

    PubMed

    Bonding, N

    1992-04-01

    Light polymerized composite resin materials are now widely used in dentistry. Most resins are polymerized by light sources which have a powerful emission of visible light and a small emission in the ultraviolet light A spectrum (UV-A 320-400 mm). Possible eye damage, induced by such light, has been investigated, but the effects on the oral mucosa, which is directly exposed to the light, have been examined in only one animal study. Langerhans cells (LC) are dendritic non-epithelial cells which form a network within stratified epithelia. LC have features of macrophages, functions as antigen-presenting cells, and play an important role in the immune system associated with skin and oral mucosa. Pilot studies on human skin transplanted to nude mice showed that radiation with small therapeutic doses from a dental light curing unit (DLU) having only a small fraction of UV-light can reduce or deplete the OKT6 surface marker of LC in human epithelium. Further investigation of the photobiologic mechanisms involved spectral analyses of the emmission from the lamps and construction of a suitable light source for establishing an action spectrum for LC in the UV-A range. The action spectrum for LC in the UV-A range was obtained by exposing human skin, grafted to nude mice, to monochromatic light with a band pass of 5-10 nm. Criterion for threshold doses was total depletion of LC, visualized by staining with known LC-markers, monoclonal antibodies OKT6, DAKO-Vimentin, DAKO-HLA-DR and DAKO-S-100. The action spectrum for LC consisted of a biphasic curve, with a non-linear, strong wave-length dependency.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1412043

  2. Line Pilots' Attitudes about and Experience with Flight Deck Automation: Results of an International Survey and Proposed Guidelines

    NASA Technical Reports Server (NTRS)

    Rudisill, Marianne

    1995-01-01

    A survey of line pilots' attitudes about flight deck automation was conducted by the Royal Air Force Institute of Aviation Medicine (RAF IAM, Farnborough, UK) under the sponsorship of the United Kingdom s Civil Aviation Authority and in cooperation with IATA (the International Air Transport Association). Survey freehand comments given by pilots operating 13 types of commercial transports across five manufacturers (Airbus, Boeing, British Aerospace, Lockheed, and McDonnell-Douglas) and 57 air carriers/organizations were analyzed by NASA. These data provide a "lessons learned" knowledge base which may be used for the definition of guidelines for flight deck automation and its associated crew interface within the High Speed Research Program. The aircraft chosen for analysis represented a progression of levels of automation sophistication and complexity, from "Basic" types (e.g., B727, DC9), through "Transition" types (e.g., A300, Concorde), to two levels of glass cockpits (e.g., Glass 1: e.g., A310; Glass 2: e.g., B747-400). This paper reports the results of analyses of comments from pilots flying commercial transport types having the highest level of automation sophistication (B757/B767, B747-400, and A320). Comments were decomposed into five categories relating to: (1) general observations with regard to flight deck automation; comments concerning the (2) design and (3) crew understanding of automation and the crew interface; (4) crew operations with automation; and (5) personal factors affecting crew/automation interaction. The goal of these analyses is to contribute to the definition of guidelines which may be used during design of future aircraft flight decks.

  3. Mathematical analysis demonstrates that interferons-β and -γ Interact in a multiplicative manner to disrupt herpes simplex virus replication

    USGS Publications Warehouse

    Halford, William P.; Halford, Keith J.; Pierce, Amy T.

    2005-01-01

    Several studies suggest that the innate interferons (IFNs), IFN-α and IFN-β, can act in concert with IFN-γto synergistically inhibit the replication of cytomegalovirus and herpes simplex virus type 1 (HSV-1). The significance of this observation is not yet agreed upon in large part because the nature and magnitude of the interaction between IFN-α/β and IFN-γ is not well defined. In the current study, we resolve this issue by demonstrating three points. First, the hyperbolic tangent function, tanh (x  ), can be used to describe the individual effects of IFN-β or IFN-γ on HSV-1 replication over a 320,000-fold range of IFN concentration. Second, pharmacological methods prove that IFN-β and IFN-γ interact in a greater-than-additive manner to inhibit HSV-1 replication. Finally, the potency with which combinations of IFN-β and IFN-γ inhibit HSV-1 replication is accurately predicted by multiplying the individual inhibitory effects of each cytokine. Thus, IFN-β and IFN-γ interact in a multiplicative manner. We infer that a primary antiviral function of IFN-γ lies in its capacity to multiply the potency with which IFN-α/β restricts HSV-1 replication in vivo. This hypothesis has important ramifications for understanding how T lymphocyte-secreted cytokines such as IFN-γ can force herpesviruses into a latent state without destroying the neurons or leukocytes that continue to harbor these viral infections for the lifetime of the host.

  4. Indium gallium arsenide imaging with smaller cameras, higher-resolution arrays, and greater material sensitivity

    NASA Astrophysics Data System (ADS)

    Ettenberg, Martin H.; Cohen, Marshall J.; Brubaker, Robert M.; Lange, Michael J.; O'Grady, Matthew T.; Olsen, Gregory H.

    2002-08-01

    Indium Gallium Arsenide (InGaAs) photodiode arrays have numerous commercial, industrial, and military applications. During the past 10 years, great strides have been made in the development of these devices starting with simple 256-element linear photodiode arrays and progressing to the large 640 x 512 element area arrays now readily available. Linear arrays are offered with 512 elements on a 25 micron pitch with no defective pixels, and are used in spectroscopic monitors for wavelength division multiplexing (WDM) systems as well as in machine vision applications. A 320 x 240 solid-state array operates at room temperature, which allows development of a camera which is smaller than 25 cm3 in volume, weighs less than 100 g and uses less than 750 mW of power. Two dimensional focal plane arrays and cameras have been manufactured with detectivity, D*, greater than 1014 cm-(root)Hz/W at room temperature and have demonstrated the ability to image at night. Cameras are also critical tools for the assembly and performance monitoring of optical switches and add-drop multiplexers in the telecommunications industry. These same cameras are used for the inspection of silicon wafers and fine art, laser beam profiling, and metals manufacturing. By varying the Indium content, InGaAs photodiode arrays can be tailored to cover the entire short-wave infrared spectrum from 1.0 micron to 2.5 microns. InGaAs focal plane arrays and cameras sensitive to 2.0 micron wavelength light are now available in 320 x 240 formats.

  5. InGaAs focal plane array developments at III-V Lab

    NASA Astrophysics Data System (ADS)

    Rouvié, Anne; Reverchon, Jean-Luc; Huet, Odile; Djedidi, Anis; Robo, Jean-Alexandre; Truffer, Jean-Patrick; Bria, Toufiq; Pires, Mauricio; Decobert, Jean; Costard, Eric

    2012-06-01

    SWIR detection band benefits from natural (sun, night glow, thermal radiation) or artificial (eye safe lasers) photons sources combined to low atmospheric absorption and specific contrast compared to visible wavelengths. It gives the opportunity to address a large spectrum of applications such as defense and security (night vision, active imaging), space (earth observation), transport (automotive safety) or industry (non destructive process control). InGaAs material appears as a good candidate to satisfy SWIR detection needs. The lattice matching with InP constitutes a double advantage to this material: attractive production capacity and uncooled operation thanks to low dark current level induced by high quality material. For few years, III-VLab has been studying InGaAs imagery, gathering expertise in InGaAs material growth and imaging technology respectively from Alcatel-Lucent and Thales, its two mother companies. This work has lead to put quickly on the market a 320x256 InGaAs module, exhibiting high performances in terms of dark current, uniformity and quantum efficiency. In this paper, we present the last developments achieved in our laboratory, mainly focused on increasing the pixels number to VGA format associated to pixel pitch decrease (15μm) and broadening detection spectrum toward visible wavelengths. Depending on targeted applications, different Read Out Integrated Circuits (ROIC) have been used. Low noise ROIC have been developed by CEA LETI to fit the requirements of low light level imaging whereas logarithmic ROIC designed by NIT allows high dynamic imaging adapted for automotive safety.

  6. Wide field of view CT and acromioclavicular joint instability: A technical innovation.

    PubMed

    Dyer, David R; Troupis, John M; Kamali Moaveni, Afshin

    2015-06-01

    A 21-year-old female with a traumatic shoulder injury is investigated and managed for symptoms relating to this injury. Pathology at the acromioclavicular joint is detected clinically; however, clinical examination and multiple imaging modalities do not reach a unified diagnosis on the grading of this acromioclavicular joint injury. When management appropriate to that suggested injury grading fail to help the patient's symptoms, further investigation methods were utilised. Wide field of view, dynamic CT (4D CT) is conducted on the patient's affected shoulder using a 320 × 0.5 mm detector multislice CT. Scans were conducted with a static table as the patient completed three movements of the affected shoulder. Capturing multiple data sets per second over a z-axis of 16 cm, measurements of the acromioclavicular joint were made, to show dynamic changes at the joint. Acromioclavicular (AC) joint translations were witnessed in three planes (a previously unrecognised pathology in the grading of acromioclavicular joint injuries). Translation in multiple planes was also not evident on careful clinical examination of this patient. AC joint width, anterior-posterior translation, superior-inferior translation and coracoclavicular width were measured with planar reconstructions while volume-rendered images and dynamic sequences aiding visual understanding of the pathology. Wide field of view dynamic CT (4D CT) is an accurate and quick modality to diagnose complex acromioclavicular joint injury. It provides dynamic information that no other modality can; 4D CT shows future benefits for clinical approach to diagnosis and management of acromioclavicular joint injury, and other musculoskeletal pathologies.

  7. Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry

    PubMed Central

    Trattner, Sigal; Cheng, Bin; Pieniazek, Radoslaw L.; Hoffmann, Udo; Douglas, Pamela S.; Einstein, Andrew J.

    2014-01-01

    Purpose: Effective dose (ED) is a widely used metric for comparing ionizing radiation burden between different imaging modalities, scanners, and scan protocols. In computed tomography (CT), ED can be estimated by performing scans on an anthropomorphic phantom in which metal-oxide-semiconductor field-effect transistor (MOSFET) solid-state dosimeters have been placed to enable organ dose measurements. Here a statistical framework is established to determine the sample size (number of scans) needed for estimating ED to a desired precision and confidence, for a particular scanner and scan protocol, subject to practical limitations. Methods: The statistical scheme involves solving equations which minimize the sample size required for estimating ED to desired precision and confidence. It is subject to a constrained variation of the estimated ED and solved using the Lagrange multiplier method. The scheme incorporates measurement variation introduced both by MOSFET calibration, and by variation in MOSFET readings between repeated CT scans. Sample size requirements are illustrated on cardiac, chest, and abdomen–pelvis CT scans performed on a 320-row scanner and chest CT performed on a 16-row scanner. Results: Sample sizes for estimating ED vary considerably between scanners and protocols. Sample size increases as the required precision or confidence is higher and also as the anticipated ED is lower. For example, for a helical chest protocol, for 95% confidence and 5% precision for the ED, 30 measurements are required on the 320-row scanner and 11 on the 16-row scanner when the anticipated ED is 4 mSv; these sample sizes are 5 and 2, respectively, when the anticipated ED is 10 mSv. Conclusions: Applying the suggested scheme, it was found that even at modest sample sizes, it is feasible to estimate ED with high precision and a high degree of confidence. As CT technology develops enabling ED to be lowered, more MOSFET measurements are needed to estimate ED with the same

  8. AET's new energy-efficient facility gears up for production

    SciTech Connect

    Pucci, A.

    1993-01-01

    American Energy Technologies, Inc. (AET), a company based just north of Green Cove Springs, Florida, has become the largest manufacturer of solar thermal products in the U.S. Phase 1 of the construction of AET's new manufacturing facility, which commenced in October 1992, was completed in April 1993. It houses high-output tooling designed by AET to ensure affordable, high-quality solar thermal hardware which is rated among the most efficient in the world today. The AET facility has integrated a number of energy-efficient design considerations and conservation measures. The passive-solar design of the building minimizes direct solar gain in the summer and maximizes tropical winds for passive cooling. Strategically placed native landscaping requires minimal maintenance, thus reducing water consumption, and provides natural shading for the offices. The exterior walls are constructed of Poly Steel hollow-core styrofoam forms filled with pumped concrete. This design provides an insulation rate of R-22, a wind load of 160 mph, and a two-hour fire rating. The light-colored office and the plant's exterior skin assist in reducing the cooling load with the protection of Lomit, a spray-applied radiant barrier manufactured by SOLEC Corporation, which coats the office roof decks. Climate control for the manufacturing area is provided by an AET solar heating system which works in tandem with two LPG Amana Command Aire 80s for back up. Office space heating is supplied by a warm forced-air system by US Solar Corporation which utilizes a 320-square-foot solar array with a 1,000-gallon storage tank. Circulation is powered by a Siemens Solar Pro photovoltaic array and the thermal system also provides solar hot water for the manufacturing process.

  9. Photon-to-digital photodiode imaging array

    NASA Astrophysics Data System (ADS)

    Mandl, William J.

    2001-10-01

    MOSAD©, Multiplexed OverSample Analog to Digital conversion, is a low power on focal plane analog to digital, A/D, process that places an oversample A/D at each pixel site. Two designs for a visible light staring array were developed with this approach. One used a silicon photo diode and the other used a photo gate for detection. The array was designed with a 320 X 240 format with the pixels placed on 16 micron centers. There are a total of 76,800 A/D's on the chip. The device is a monolithic integrated circuit that includes the sensors, A/D's and readout circuitry. A production 1.2 micron CCD/CMOS process was used in it construction. The A/D uses charge well switching at the pixel to convert the accumulated analog signal to digital data. There was negligible impact on the pixel area due to the A/D such that a fill factor of 73% was achieved with front side illumination for both approaches. At 400 samples per second, measured on chip power consumption is under 10 milliwatts. Noise measurements at sample rates from 400 samples per second to 1,600 samples per second were taken for both parts. It was found that the photo gate noise performance was four times better than the photo diode. At a nominal 28 times oversample, the photo diode obtained 8 to 9 bits performance and the photo gate achieved 10 to 11 bits. Nonuniformity variation was below the noise floor. No explanation for the difference in noise performance has yet been determined. This development was sponsored by NASA under a SBIR program.

  10. Effect of solar ultraviolet radiation on growth in the marine macroalga Dictyota dichotoma (Phaeophyceae) at Helgoland and its ecological consequences

    NASA Astrophysics Data System (ADS)

    Kuhlenkamp, R.; Franklin, L. A.; Lüning, K.

    2001-03-01

    At Helgoland, in the North Sea, growth of the high sublittoral brown macroalga Dictyota dichotoma (Hudson) Lamoroux was examined in October (the time of tetraspore release) in an outdoor tank by exposing 2-day-old germlings to four solar radiation treatments achieved with different filter materials or an additional artificial light source: photosynthetically active radiation (PAR; 395-700 nm), PAR plus ultraviolet (UV)-A (320-700 nm), full solar spectrum, or solar spectrum plus artificial UV radiation (UVR). Based on length measurements over a period of 3 weeks, the growth rate in germlings strongly decreased in conditions with UVR compared to PAR: by 14% under PAR+UV-A, by 31% under the full solar spectrum and by 65% with additional UVR. Although growth rates of germlings under UVR were reduced mainly in the first week, the plants did not regain the size of the untreated plants even after 9 weeks. Regardless of the exposure, no defects in morphology or anatomy including the exposed apical meristem were detected, except for a reduction in cell division rates perhaps due to additional cost for photoprotective or repair mechanisms. Depending on the actual position of D. dichotoma plants in the natural habitat, individuals in high positions receive substantial amounts of the more harmful UV-B while those lower down might only receive UV-A during part of the day, thus the effect of UV-B on the growth of D. dichotoma will depend on its position in the field. The effects of tidal variation of the light climate and the implications of our results for the zonation of D. dichotoma are discussed.

  11. Analyzing the performance of the planning system by use of AAPM TG 119 test cases.

    PubMed

    Nithya, L; Raj, N Arunai Nambi; Rathinamuthu, Sasikumar; Pandey, Manish Bhushan

    2016-01-01

    Our objective in this study was to create AAPM TG 119 test plans for intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) in the Monaco planning system. The results were compared with the published studies, and the performance of the Monaco planning system was analyzed. AAPM TG 119 proposed a set of test cases called multi-target, mock prostate, mock head and neck and C-shape to ascertain the overall accuracy of IMRT planning, measurement, and analysis. We used these test cases to investigate the performance of the Monaco planning system for the complex plans. For these test cases, we created IMRT plans with static multi-leaf collimator (MLC) and dynamic MLC by using 7-9 static beams as explained in TG-119. VMAT plans were also created with a 320° arc length and a single or double arc. The planning objectives and dose were set as described in TG 119. The dose prescriptions for multi-target, mock prostate, mock head and neck, and C-shape were taken as 50, 75.6, 50 and 50 Gy, respectively. All plans were compared with the results of TG 119 and the study done by Mynampati et al. Point dose and fluence measurements were done with a CC13 chamber and ArcCHECK phantom, respectively. Gamma analysis was done for the calculated and measured dose. Using the Monaco planning system, we achieved the goals mentioned in AAPM TG-119, and the plans were comparable to those of other studies. A comparison of point dose and fluence showed good results. From these results, we conclude that the performance of the Monaco planning system is good for complex plans.

  12. Contrasting effects of UV-A and UV-B on photosynthesis and photoprotection of beta-carotene in two Dunaliella spp.

    PubMed

    White, Andrea L; Jahnke, Leland S

    2002-08-01

    Photosynthetic and antioxidant responses following exposure to either ultraviolet-A or ultraviolet-B were contrasted in two species of the unicellular green alga, DUNALIELLA: Species selection was based on the ability of Dunaliella bardawil (UTEX 2538) to accumulate inter-thylakoid beta-carotene when subjected to environmental stress while Dunaliella salina (UTEX 200) lacks this ability. Cells were cultured in high and low levels of visible light (150 and 35 micro mol photons m(-2 )s(-1), respectively) and then either ultraviolet-A (320-400 nm) or ultraviolet-B (290-320 nm) was added to visible light for 24-h exposure. A potassium chromate solution was found to be an ideal screen for removal of ultraviolet-A and ultraviolet-C from ultraviolet-B radiation. There were no significant changes in photosynthetic or antioxidant parameters following exposure to ultraviolet-B. Ultraviolet-A exposure significantly decreased photosynthetic parameters (>70% decrease in Fv/Fm and the ratio of light-limited to light-saturated photosynthesis in low beta-carotene cells) and resulted in 50% increases in ascorbate peroxidase activity and ascorbate concentrations. The results suggest exposure to ultraviolet-A (but not ultraviolet-B) directly affects photosynthesis, observed as a loss of photosystem II electron transport efficiency and increased radical formation. This research indicates that the accumulated beta-carotene in D. bardawil prevents UV-related photosynthetic damage through blue-light/ultraviolet-A absorption (supported by trends observed for antioxidant enzyme responses).

  13. Impact of gonadotropin supplementation on the expression of germ cell marker genes (MATER, ZAR1, GDF9, and BMP15) during in vitro maturation of buffalo (Bubalus bubalis) oocyte.

    PubMed

    Nath, Amar; Sharma, Veena; Dubey, Pawan K; Pratheesh, M D; Gade, Nitin E; Saikumar, G; Sharma, G Taru

    2013-01-01

    The present study was designed to investigate whether gonadotropins [follicle-stimulating hormone (FSH) and luteinizing hormone (LH)] and buffalo follicular fluid (bFF) supplementation in maturation medium influences the transcript abundance of germ cell marker genes [maternal antigen that embryos require (MATER), Zygote arrest 1 (ZAR1), growth differentiation factor 9 (GDF9), and bone morphogenetic protein 15 (BMP15)] mRNA in buffalo (Bubalus bubalis) oocytes. Buffalo ovaries were collected from local abattoir, oocytes were aspirated from antral follicles (5-8 mm) and matured in vitro using two different maturation regimens, viz, group A: gonadotropin (FSH and LH) and group B: non-gonadotropin-supplemented maturation medium containing 20% buffalo follicular fluid (bFF). mRNA was isolated from immature (330) and in vitro matured oocytes from both the groups (A, 320; B, 340), and reverse transcribed using Moloney murine leukemia virus reverse transcriptase. Expression levels of MATER, ZAR1, GDF9, and BMP15 mRNA transcripts were analyzed in oocytes of both maturation groups as well as immature oocytes using real-time PCR. QPCR results showed that GDF9 and BMP15 transcripts were significantly (p<0.05) influenced with gonadotropins and bFF supplementation during in vitro maturation of buffalo oocyte; however, MATER and ZAR1 transcripts were not influenced with gonadotropins and bFF supplementation in vitro. These results indicated that the expression levels of MATER, ZAR1, GDF9, and BMP15 mRNA were varied differentially during in vitro maturation of buffalo oocyte and were found to be gonadotropins (FSH and LH) or bFF dependent for GDF9 and BMP15.

  14. High Methylmercury in Arctic and Subarctic Ponds is Related to Nutrient Levels in the Warming Eastern Canadian Arctic.

    PubMed

    MacMillan, Gwyneth A; Girard, Catherine; Chételat, John; Laurion, Isabelle; Amyot, Marc

    2015-07-01

    Permafrost thaw ponds are ubiquitous in the eastern Canadian Arctic, yet little information exists on their potential as sources of methylmercury (MeHg) to freshwaters. They are microbially active and conducive to methylation of inorganic mercury, and are also affected by Arctic warming. This multiyear study investigated thaw ponds in a discontinuous permafrost region in the Subarctic taiga (Kuujjuarapik-Whapmagoostui, QC) and a continuous permafrost region in the Arctic tundra (Bylot Island, NU). MeHg concentrations in thaw ponds were well above levels measured in most freshwater ecosystems in the Canadian Arctic (>0.1 ng L(-1)). On Bylot, ice-wedge trough ponds showed significantly higher MeHg (0.3-2.2 ng L(-1)) than polygonal ponds (0.1-0.3 ng L(-1)) or lakes (<0.1 ng L(-1)). High MeHg was measured in the bottom waters of Subarctic thaw ponds near Kuujjuarapik (0.1-3.1 ng L(-1)). High water MeHg concentrations in thaw ponds were strongly correlated with variables associated with high inputs of organic matter (DOC, a320, Fe), nutrients (TP, TN), and microbial activity (dissolved CO2 and CH4). Thawing permafrost due to Arctic warming will continue to release nutrients and organic carbon into these systems and increase ponding in some regions, likely stimulating higher water concentrations of MeHg. Greater hydrological connectivity from permafrost thawing may potentially increase transport of MeHg from thaw ponds to neighboring aquatic ecosystems. PMID:26030209

  15. Computed Tomography (CT) Perfusion as an Early Predictive Marker for Treatment Response to Neoadjuvant Chemotherapy in Gastroesophageal Junction Cancer and Gastric Cancer - A Prospective Study

    PubMed Central

    Hansen, Martin Lundsgaard; Fallentin, Eva; Lauridsen, Carsten; Law, Ian; Federspiel, Birgitte; Bæksgaard, Lene; Svendsen, Lars Bo; Nielsen, Michael Bachmann

    2014-01-01

    Objectives To evaluate whether early reductions in CT perfusion parameters predict response to pre-operative chemotherapy prior to surgery for gastroesophageal junction (GEJ) and gastric cancer. Materials and Methods Twenty-eight patients with adenocarcinoma of the gastro-esophageal junction (GEJ) and stomach were included. Patients received three series of chemotherapy before surgery, each consisting of a 3-week cycle of intravenous epirubicin, cisplatin or oxaliplatin, concomitant with capecitabine peroral. The patients were evaluated with a CT perfusion scan prior to, after the first series of, and after three series of chemotherapy. The CT perfusion scans were performed using a 320-detector row scanner. Tumour volume and perfusion parameters (arterial flow, blood volume and permeability) were computed on a dedicated workstation with a consensus between two radiologists. Response to chemotherapy was evaluated by two measures. Clinical response was defined as a tumour size reduction of more than 50%. Histological response was evaluated based on residual tumour cells in the surgical specimen using the standardized Mandard Score 1 to 5, in which values of 1 and 2 were classified as responders, and 3 to 5 were classified as nonresponders. Results A decrease in tumour permeability after one series of chemotherapy was positively correlated with clinical response after three series of chemotherapy. Significant changes in permeability and tumour volume were apparent after three series of chemotherapy in both clinical and histological responders. A cut-off value of more than 25% reduction in tumour permeability yielded a sensitivity of 69% and a specificity of 58% for predicting clinical response. Conclusion Early decrease in permeability is correlated with the likelihood of clinical response to pre-operative chemotherapy in GEJ and gastric cancer. As a single diagnostic test, CT Perfusion only has moderate sensitivity and specificity in response assessment of pre

  16. Validity of the size-specific dose estimate in adults undergoing coronary CT angiography: comparison with the volume CT dose index.

    PubMed

    Kidoh, Masafumi; Utsunomiya, Daisuke; Oda, Seitaro; Funama, Yoshinori; Yuki, Hideaki; Nakaura, Takeshi; Kai, Noriyuki; Nozaki, Takeshi; Yamashita, Yasuyuki

    2015-12-01

    Size-specific dose estimate (SSDE) takes into account the patient size but remains to be fully validated for adult coronary computed tomography angiography (CCTA). We investigated the appropriateness of SSDE for accurate estimation of patient dose by comparing the SSDE and the volume CT dose index (CTDIvol) in adult CCTA. This prospective study received institutional review board approval, and informed consent was obtained from each patient. We enrolled 37 adults who underwent CCTA with a 320-row CT. High-sensitivity metal oxide semiconductor field effect transistor dosimeters were placed on the anterior chest. CTDIvol reported by the scanner based on a 32-cm phantom was recorded. We measured chest diameter to convert CTDIvol to SSDE. Using linear regression, we then correlated SSDE with the mean measured skin dose. We also performed linear regression analyses between the skin dose/CTDIvol and the body mass index (BMI), and the skin dose/SSDE and BMI. There was a strong linear correlation (r = 0.93, P < 0.001) between SSDE (mean 37 ± 22 mGy) and mean skin dose (mean 17.7 ± 10 mGy). There was a moderate negative correlation between the skin dose/CTDIvol and BMI (r = 0.45, P < 0.01). The skin dose/SSDE was not affected by BMI (r = 0.06, P > 0.76). SSDE yields a more accurate estimation of the radiation dose without estimation errors attributable to the body size of adult patients undergoing CCTA. PMID:26440660

  17. Effects of the Nd:YAG laser and combined treatments on in vitro fibroblast attachment to root surfaces.

    PubMed

    Thomas, D; Rapley, J; Cobb, C; Spencer, P; Killoy, W

    1994-01-01

    The purpose of this in vitro study was to evaluate the effects of the Nd:YAG laser either alone or in combination with root planning or air-powder abrasive treatment on fibroblast attachment to non-diseased root surfaces. 28, 4 x 4 mm root specimens and four disc-shaped root specimens 6 mm in diameter were obtained from unerupted 3rd molars. The root segments were randomly assigned to 4 treatment groups: (1) control; (2) laser-only treated; (3) laser treated followed by root planning; (4) laser treated followed by air-powder abrasive treatment. Laser-treated root specimens were exposed for 1 min with the Nd:YAG laser calibrated at an energy setting of 75 mJ at 20 pulses/s using a 320 microns contact fiber. The contact fiber was held parallel to the root segments and the root segments were kept moist with distilled water. Following the prescribed treatments, the root specimens were incubated with fibroblast cultures and then prepared for SEM examination. Results of cell counts of fibroblasts attached to specimens within each treatment group yielded the following means and standard deviations: control groups, 181.64 +/- 44.74; lased only, 78.57 +/- 21.35; lased and root planed 125.35 +/- 26.13; and lased followed by an air-powder abrasive, 177.28 +/- 55.71. Application of ANOVA followed by the Dunn Multiple Comparison test revealed significant differences (p < 0.01) in the number of attached cells between the control and laser-only treated groups; and between the laser-only and laser/air-powder abrasive treated groups.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8126242

  18. Quantitative measurement of the efficacy of protein removal by cleaning formulations; comparative evaluation of prion-directed cleaning chemistries.

    PubMed

    Ungurs, M; Hesp, J R; Poolman, T; McLuckie, G; O'Brien, S; Murdoch, H; Wells, P; Raven, N D H; Walker, J T; Sutton, J M

    2010-02-01

    The stability of the infectious agent causing variant Creutzfeldt-Jakob disease (vCJD) has highlighted the importance of cleaning surgical instruments for controlling potential spread of iatrogenic CJD. In this study, thermostable adenylate kinases (tAKs) in test soil were coated on to stainless steel and these surrogate agents used to evaluate the efficacy of a range of cleaning chemistries in a bench-top washer disinfector (btWD), or as a pre-soak either with or without subsequent treatment by btWD. Two tAKs were tested initially for ease of removal, the most persistent being Sulfolobus acidocaldarius-derived tAK which was used for evaluating the cleaning chemistries. Conventional chemistries were generally more effective when used in a btWD than as pre-soaks. Cleaning efficacy improved when pre-soaks were followed by treatment with intermediate performing enzymes, demonstrating greater than additive effect on residual tAK activity. Three of the four prion-directed chemistries reduced residual tAK activity to below the limit of quantification (LoQ) by more than 4.8 log(10); <175pg tAK remaining as a pre-soak alone. A conventional alkaline cleaning product also reduced residual tAK activity to below the LoQ but only when used in a btWD. tAK soil dried on to the device was removed less efficiently than tAK soil still moist on the device, with a 320-fold and 28-fold increase in residual tAK activity for pre-soak and btWD, respectively. The study demonstrated the potential for a tAK indicator to describe the effectiveness of protein removal using different chemistries or treatment processes.

  19. Automated continuous quantitative measurement of proximal airways on dynamic ventilation CT: initial experience using an ex vivo porcine lung phantom

    PubMed Central

    Yamashiro, Tsuneo; Tsubakimoto, Maho; Nagatani, Yukihiro; Moriya, Hiroshi; Sakuma, Kotaro; Tsukagoshi, Shinsuke; Inokawa, Hiroyasu; Kimoto, Tatsuya; Teramoto, Ryuichi; Murayama, Sadayuki

    2015-01-01

    Background The purpose of this study was to evaluate the feasibility of continuous quantitative measurement of the proximal airways, using dynamic ventilation computed tomography (CT) and our research software. Methods A porcine lung that was removed during meat processing was ventilated inside a chest phantom by a negative pressure cylinder (eight times per minute). This chest phantom with imitated respiratory movement was scanned by a 320-row area-detector CT scanner for approximately 9 seconds as dynamic ventilatory scanning. Obtained volume data were reconstructed every 0.35 seconds (total 8.4 seconds with 24 frames) as three-dimensional images and stored in our research software. The software automatically traced a designated airway point in all frames and measured the cross-sectional luminal area and wall area percent (WA%). The cross-sectional luminal area and WA% of the trachea and right main bronchus (RMB) were measured for this study. Two radiologists evaluated the traceability of all measurable airway points of the trachea and RMB using a three-point scale. Results It was judged that the software satisfactorily traced airway points throughout the dynamic ventilation CT (mean score, 2.64 at the trachea and 2.84 at the RMB). From the maximum inspiratory frame to the maximum expiratory frame, the cross-sectional luminal area of the trachea decreased 17.7% and that of the RMB 29.0%, whereas the WA% of the trachea increased 6.6% and that of the RMB 11.1%. Conclusion It is feasible to measure airway dimensions automatically at designated points on dynamic ventilation CT using research software. This technique can be applied to various airway and obstructive diseases. PMID:26445535

  20. Uncooled SWIR InGaAs/GaAsSb type-II quantum well focal plane array

    NASA Astrophysics Data System (ADS)

    Inada, H.; Miura, K.; Mori, H.; Nagai, Y.; Iguchi, Y.; Kawamura, Y.

    2010-04-01

    Low dark current photodiodes (PDs) in the short wavelength infrared (SWIR) upto 2.5μm region, are expected for many applications. HgCdTe (MCT) is predominantly used for infrared imaging applications. However, because of high dark current, MCT device requires a refrigerator such as stirling cooler, which increases power consumption, size and cost of the sensing system. Recently, InGaAs/GaAsSb type II quantum well structures were considered as attractive material system for realizing low dark current PDs owing to lattice-matching to InP substrate. Planar type PIN-PDs were successfully fabricated. The absorption layer with 250 pair-InGaAs(5nm)/GaAsSb(5nm) quantum well structures was grown on S-doped (100) InP substrates by solid source molecular beam epitaxy method. InP and InGaAs were used for cap layer and buffer layer, respectively. The p-n junctions were formed in the absorption layer by the selective diffusion of zinc. Diameter of light-receiving region was 140μm. Low dark current was obtained by improving GaAsSb crystalline quality. Dark current density was 0.92mA/cm2 which was smaller than that of a conventional MCT. Based on the same process as the discrete device, a 320x256 planar type focal plane array was also fabricated. Each PD has 15μm diameter and 30μm pitch and it was bonded to read-out IC by using indium bump flip chip process. Finally, we have successfully demonstrated the 320 x256 SWIR image at room temperature. This result means that planer type PD array with the type II InGaAs/GaAsSb quantum well structure is a promising candidate for uncooled applications.

  1. Mid-infrared imaging Fourier transform spectrometry for high power fiber laser irradiated fiberglass composites

    NASA Astrophysics Data System (ADS)

    Acosta, R. I.; Gross, K. C.; Perram, G. P.

    2012-03-01

    New measurement techniques to study continuous wave (CW) laser-material interactions are emerging with the ability to monitor the evolving, spatial distribution of the state of the surface-gas boundary layer. A qualitative analysis of gas phase combustion plumes above the surface of laser irradiated fiberglass composites is developed from fast framing hyperspectral imagery observations. An imaging Fourier Transform Spectrometer (IFTS) operating in the mid-infrared (MWIR) with high framing rate has recently been developed at the Air Force Institute of Technology (AFIT) in collaboration with Telops Inc. A 320 x 256 indium antimonide (InSb) focal plane array with spectral response from 1.5 - 5.5 μm is mated with a Michelson interferometer to achieve spectral resolutions as high as 0.25 cm-1. The very fast 16- tap InSb array frames at 1.9 kHz for the full 320 x 256 frame size. The single pixel field of view of 0.3 mrad provides a spatial resolution of 1 mm at the minimum focal distance of 3 m. Painted and unpainted fiberglass composites are irradiated with a 1064 nm CW Nd:YAG laser for 60 s at 100 W in air at atmospheric pressure. Selective emission in the region of 2100 - 3200 cm-1 is readily evident and is used to develop a time-dependent spatial map of both temperature and plume constituents. The time evolution of gas phase combustion products such as CO and CO2 molecules are monitored, with a spectral resolution of 2 cm-1. High-speed imagery is obtained using a low-pass filter for the interferograms, illustrating significant turbulent behavior during laser irradiation. Spatial brightness temperature maps exceed 600 K. Spatial variation in the ratio of [CO2]/[CO] indicates an interplay between heterogeneous and homogeneous kinetics.

  2. Contribution of Clay mineralogy of Bengal Fan deposits at 8°N for understanding of Himalayan provenance and environmental conditions

    NASA Astrophysics Data System (ADS)

    Huyghe, Pascale; France-Lanord, Christian; IODP Expedition 354 Scientists

    2016-04-01

    The IODP 354 expedition (February-March 2015) focused on the middle part of the Bengal Fan (8°N). Seven sites were drilled along a 320 km- long transect and provided good recovery and excellent data to study both provenance of the material from the Himalayan orogeny and palaeoceanography linked to the Asian monsoon. Neogene sediments consist of an alternation of rapidly deposited, silty to muddy turbidites (10-100 cm/kyr) forming levees of channels intercalated with minor slowly deposited hemipelagic clays (1-2 cm/kyr), which may be found over the whole investigated area. Thick interlevee sand sheet units also occur between channel levees. The turbiditic sand, silt and clay have mineralogical signatures very similar to those of the modern Ganges and Brahmaputra rivers and are therefore relevant for reconstructing time series of erosion, weathering, and changes in Himalayan sources regions. Hemipelagic calcareous clays may provide additional information on environmental conditions throughout the Himalayan basin. Preliminar shipboard XRD analysis revealed that the clayey assemblages of sediments are relatively constant through the Neogene. Turbidite clay assemblages are dominated by detrital illite and chlorite as observed in the modern Himalayan rivers, suggesting that erosion conditions were relatively steady over the last 25 Ma. Hemipelagic clay assemblages vary from 1) identical to the illite-chlorite rich clays of turbidites, characteristic for Himalayan rivers, to 2) smectite rich assemblages enriched in iron and depleted in potassium, representing either more extreme sorting of the same material or input from another source. Further detailed investigation using decomposition of X-Ray diffraction (XRD) patterns reveals much more complex clay assemblages, especially great quantities of mixed-layers, the quantity and mineralogy of which varies and differs in the three depositional units as determined by turbidites levees, hemipelagic clayey beds and interlevees

  3. Particle and gaseous emissions from commercial aircraft at each stage of the landing and takeoff cycle.

    PubMed

    Mazaheri, M; Johnson, G R; Morawska, L

    2009-01-15

    A novel technique was used to measure emission factors for commonly used commercial aircraft including a range of Boeing and Airbus airframes under real world conditions. Engine exhaust emission factors for particles in terms of particle number and mass (PM2.5), along with those for CO2 and NOx, were measured for over 280 individual aircraft during the various modes of landing/takeoff (LTO) cycle. Results from this study show that particle number, and NOx emission factors are dependent on aircraft engine thrust level. Minimum and maximum emissions factors for particle number, PM2.5, and NOx emissions were found to be in the range of 4.16 x 10(15)-5.42 x 10(16) kg(-1), 0.03-0.72 g.kg(-1), and 3.25-37.94 g.kg(-1), respectively, for all measured airframes and LTO cycle modes. Number size distributions of emitted particles for the naturally diluted aircraft plumes in each mode of LTO cycle showed that particles were predominantly in the range of 4-100 nm in diameter in all cases. In general, size distributions exhibit similar modality during all phases of the LTO cycle. A very distinct nucleation mode was observed in all particle size distributions, except for taxiing and landing of A320 aircraft. Accumulation modes were also observed in all particle size distributions. Analysis of aircraft engine emissions during LTO cycle showed that aircraft thrust level is considerably higher during taxiing than idling suggesting that International Civil Aviation Organization (ICAO) standards need to be modified as the thrust levels for taxi and idle are considered to be the same (7% of total thrust) (Environmental Protection, Annex 16, Vol. II, Aircraft Engine Emissions, 2nd ed.; ICAO--International Civil Aviation Organization: Montreal, 1993).

  4. SST phases in the open-ocean and margins of the tropical Pacific; implication on tropical climate dynamics

    NASA Astrophysics Data System (ADS)

    Shiau, L.-J.; Clemens, S. C.; Chen, M.-T.; Yamamoto, M.; Yokoyama, Y.

    2014-04-01

    The tropical Pacific exerts a major effect on the global climate system and might have driven large extra-tropical climate change. We present a 320 kyr high resolution UK'37-sea surface temperature (SST) record from core MD052928 (11°17.26' S, 148°51.60' E, water depth 2250 m) located off southeastern Papua New Guinea (PNG), in the western tropical Pacific. The age model of the core is based on AMS 14C dating of planktic foraminifers and correlation of benthic to the LR04 stack. The UK'37-SST ranges from 26.5 to 29 °C, showing glacial-interglacial and millennial variations. We assess the phase of the MD052928 UK'37-SST as part of a synthesis of five other SST records from the tropical Pacific at the precession, obliquity, and eccentricity bands. The SST records can be separated into two groups when considering SST phase relative to changes in orbital forcing, ice volume and greenhouse gases (GHGs). SST maxima at open-ocean sites within primary equatorial current systems occur between obliquity maxima and methane (CH4) maxima but early relative to ice volume minima and CO2 maxima at the obliquity band. In contrast, SST maxima at continental margin sites change are in phase with ice minima and CO2 maxima, likely influenced by the slow response of continental ice sheets and GHGs. At the precession band, the early group located on the Warm Pool area indicates a direct influenced by the local insolation, and with the similar phase progress as the obliquity band. These results indicate that the decreased high-low latitudes insolation gradient and increasing low latitude local insolation resulting in tropical Pacific SST rise. Higher SST would supply more moisture resulting in increased CH4 in the tropical wetlands. This promotes increasing CO2 and deglaciation leading to increase continental and continental margin surface temperatures.

  5. microRNA-320/RUNX2 axis regulates adipocytic differentiation of human mesenchymal (skeletal) stem cells

    PubMed Central

    Hamam, D; Ali, D; Vishnubalaji, R; Hamam, R; Al-Nbaheen, M; Chen, L; Kassem, M; Aldahmash, A; Alajez, N M

    2014-01-01

    The molecular mechanisms promoting lineage-specific commitment of human mesenchymal (skeletal or stromal) stem cells (hMSCs) into adipocytes (ADs) are not fully understood. Thus, we performed global microRNA (miRNA) and gene expression profiling during adipocytic differentiation of hMSC, and utilized bioinformatics as well as functional and biochemical assays, and identified several novel miRNAs differentially expressed during adipogenesis. Among these, miR-320 family (miR-320a, 320b, 320c, 320d and 320e) were ~2.2–3.0-fold upregulated. Overexpression of miR-320c in hMSC enhanced adipocytic differentiation and accelerated formation of mature ADs in ex vivo cultures. Integrated analysis of bioinformatics and global gene expression profiling in miR-320c overexpressing cells and during adipocytic differentiation of hMSC identified several biologically relevant gene targets for miR-320c including RUNX2, MIB1 (mindbomb E3 ubiquitin protein ligase 1), PAX6 (paired box 6), YWHAH and ZWILCH. siRNA-mediated silencing of those genes enhanced adipocytic differentiation of hMSC, thus corroborating an important role for those genes in miR-320c-mediated adipogenesis. Concordant with that, lentiviral-mediated stable expression of miR-320c at physiological levels (~1.5-fold) promoted adipocytic and suppressed osteogenic differentiation of hMSC. Luciferase assay validated RUNX2 (Runt-related transcription factor 2) as a bona fide target for miR-320 family. Therefore, our data suggest miR-320 family as possible molecular switch promoting adipocytic differentiation of hMSC. Targeting miR-320 may have therapeutic potential in vivo through regulation of bone marrow adipogenesis. PMID:25356868

  6. Characterization of a novel chromosome 5 neural cadherin exhibiting an unusual genomic organization

    SciTech Connect

    Bruno, S.; Selig, S.; Kunkel, L.M. |

    1994-09-01

    In order to analyze the SMA locus on 5q13, yeast artificial chromosomes (YACs) from the region were used to directly select for expressed cDNAs from brain, muscle, and spinal cord. Among the cDNAs selected, a single one, c41, showed significant homology to a family of cell adhesion molecules called cadherins. Using c41, a 320 bp fragment, two types of full length cDNAs were acquired. The most abundant type (90% of clones) has a short open reading frame of only 110 amino acids in a transcript of 4.5 kb. The second type, 8B1, has a large open reading frame of 794 amino acids containing all the typical characteristics of a cadherin gene. The short open reading frame of c41 is found at near identity within the 8B1 open reading frame. Northern blot analysis of 8B1 reveals a 4.4 kb transcript which is expressed in various regions of the brain, as well as the testis, and at lower levels in the ovary and kidney. c41, however, shows no defined band on Northern Blots. RT-PCR reveals greater than 10-fold levels of the c41 transcript relative to 8B1. By FISH and Southern blotting analysis, the c41 sequence appears to be duplicated several times in the SMA region and once in 5p. In contrast the 8B1 transcript maps only to 5p13-14. The instability of the YACs and phages from the SMA region suggests that the clustering of many copies of the c41 locus may lead to recombination and subsequent deletions of the DNA - a possible mechanism for disrupting the SMA locus. We are currently studying what role if any these two novel related transcripts play in the etiology of the SMA phenotype.

  7. Magnitude and effects of x-ray scatter in a 256-slice CT scanner

    SciTech Connect

    Endo, Masahiro; Mori, Shinichiro; Tsunoo, Takanori; Miyazaki, Hiroaki

    2006-09-15

    We developed a prototype 256-slice CT scanner that employs continuous rotation of a cone-beam with a larger cone angle than conventional multidetector CTs (MDCT) to ensure a wide field of view. However, a larger cone angle may result in image deterioration due to increased x-ray scatter. Scattered radiation causes the detected signals to deviate from the true measurement of primary x-ray intensity and may result in artifacts (e.g., cupping and streak artifacts), quantitative inaccuracy in reconstructed CT number, and degradation of contrast-to-noise ratio (CNR). To reduce the effects of scatter, the 256-slice scanner incorporates an antiscatter collimator. Here, we estimated the magnitude of x-ray scatter in the prototype 256-slice CT scanner under clinical scan conditions and quantified the effects of this scatter on CT number accuracy, image noise, uniformity, and low contrast detectability. Although most experiments were performed with the antiscatter collimator, we also estimated the magnitude of x-ray scatter without the collimator to evaluate the scatter rejection efficiency of the collimator. The scatter-to-primary energy fluence ratio (SPR) without the collimator increased as cone angle increased, with estimated values of 49.7% for a 138 mm beam width with a phantom of 200 mm diameter, and 78.5% for a 320 mm diameter phantom. Estimated SPR was drastically decreased with the collimator, with an SPR reduction rate (ratio of SPR with and without the collimator) of 12.7% and 16.8% for the 200 and 320 mm diameter phantoms, respectively. The reduction in x-ray scatter by the collimator resulted in a considerable reduction in scatter effects. The measured uniformity was good and was independent of scatter amount. Although scatter still affected CT number accuracy, this could be corrected by rescaling. Further, although the CNR was decreased, in theory at least, the change was so subtle that it had no substantial effect on low-contrast detectability.

  8. Radiation dose reduction for coronary artery calcium scoring at 320-detector CT with adaptive iterative dose reduction 3D.

    PubMed

    Tatsugami, Fuminari; Higaki, Toru; Fukumoto, Wataru; Kaichi, Yoko; Fujioka, Chikako; Kiguchi, Masao; Yamamoto, Hideya; Kihara, Yasuki; Awai, Kazuo

    2015-06-01

    To assess the possibility of reducing the radiation dose for coronary artery calcium (CAC) scoring by using adaptive iterative dose reduction 3D (AIDR 3D) on a 320-detector CT scanner. Fifty-four patients underwent routine- and low-dose CT for CAC scoring. Low-dose CT was performed at one-third of the tube current used for routine-dose CT. Routine-dose CT was reconstructed with filtered back projection (FBP) and low-dose CT was reconstructed with AIDR 3D. We compared the calculated Agatston-, volume-, and mass scores of these images. The overall percentage difference in the Agatston-, volume-, and mass scores between routine- and low-dose CT studies was 15.9, 11.6, and 12.6%, respectively. There were no significant differences in the routine- and low-dose CT studies irrespective of the scoring algorithms applied. The CAC measurements of both imaging modalities were highly correlated with respect to the Agatston- (r = 0.996), volume- (r = 0.996), and mass score (r = 0.997; p < 0.001, all); the Bland-Altman limits of agreement scores were -37.4 to 51.4, -31.2 to 36.4 and -30.3 to 40.9%, respectively, suggesting that AIDR 3D was a good alternative for FBP. The mean effective radiation dose for routine- and low-dose CT was 2.2 and 0.7 mSv, respectively. The use of AIDR 3D made it possible to reduce the radiation dose by 67% for CAC scoring without impairing the quantification of coronary calcification. PMID:25754302

  9. Contrail ice particle formation in the wakes of airliners - insights from in-situ measurements and modelling.

    NASA Astrophysics Data System (ADS)

    Schumann, Ulrich; Jeßberger, Philipp; Voigt, Christiane

    2013-04-01

    The role of soot and volatile aerosol in controlling ice particle formation in cirrus clouds is of global importance for climate. In particular, contrail studies may help to better understand the role of various aerosols in ice formation. Recent results suggest that contrails may contribute a large share to the climate impact of aviation. Hence, better knowledge on contrails is needed for developing a sustainable air transport system. So far, contrail models either specify the initial number of ice particles per flight distance or assume that the initial number of ice particles is determined by the number of soot particles emitted. Previous measurements were unable to decide conclusively whether the number of ice particles is directly related to the number of soot particles. Also information on the relative distribution of the mean ice particle concentration in the primary and secondary wakes is missing. Here, we analyze particle concentrations and trace gas mixing ratios, their dilution and their correlations in 2 min old contrails from four airliners of types A319, A340, B737, and A380 under similar meteorological conditions. The measurements were performed with the research aircraft Falcon above northern Germany during the CONCERT campaign in November 2008. The instrumentation and observation methods were described before (Voigt et al., 2010). The number of ice particles in contrails of the four airliners at cruise is determined from the measurements and a dilution model, and compared with estimated soot emissions. Dilution is derived from measured concentrations of NO, NOy, SO2 and HONO. The trace gas concentrations are largest in the primary wake and decrease with altitude in the secondary wake, consistent with emissions and aircraft-dependent dilution. In contrast, ice particle concentrations are slightly larger in the secondary wake than in the primary wake, and significantly larger than expected from dilution and emissions. The total particle concentration

  10. Technetium Sorption By Cementitious Materials Under Reducing Conditions

    SciTech Connect

    Kaplan, Daniel I.; Estes, Shanna L.; Arai, Yuji; Powell, Brian A.

    2013-07-18

    conditions are established to permit measuring more representative K{sub d} and solubility values under these experimental conditions. The purpose of this revision is to correct K{sub d} values reported in the original document. This document reports results for the first 56 days of a 319 day experiment. After the experiment had finished and all the data were compiled for QA/QC analysis, a mistake in the K{sub d} calculations was found. The K{sub d} values reported in revision 0 of this report were essentially one order of magnitude higher than the actual values. In this revision, the text references to K{sub d} values have been updated along with the data in Figure 2 and Appendix B. Between the time the original document was issued, Janurary 2012, and this document was issued, a final report (Estes et al. 2012; SRNL-STI-2012-00596, Rev. 0) describing all the corrected data for the 319 day experiment was issued. This document does not contain any data that is not already reported in the final report (SRNL-STI-2012-00596, Rev. 0).

  11. Microfabricated Instrumentation for Chemical Sensing in Industrial Process Control

    SciTech Connect

    Ramsey, J. M.

    2000-06-01

    }m wide coated with a C18 phase, and elution was achieved under isocratic, step, or linear gradient conditions. For the solid phase extraction signal enhancement factors of 400 over a standard injection of 1.0 s were observed for a 320 s injection. Four polycyclic aromatic compounds (PAHs) were resolved by open channel electrochromatography in under 50 s. Chip operation was unaffected by the presence of the 5 {micro}m silica particles at the filter entrance.

  12. Interactive Effects of Temperature and UV Radiation on Photosynthesis of Chlorella Strains from Polar, Temperate and Tropical Environments: Differential Impacts on Damage and Repair

    PubMed Central

    Wong, Chiew-Yen; Teoh, Ming-Li; Phang, Siew-Moi; Lim, Phaik-Eem; Beardall, John

    2015-01-01

    Global warming and ozone depletion, and the resulting increase of ultraviolet radiation (UVR), have far-reaching impacts on biota, especially affecting the algae that form the basis of the food webs in aquatic ecosystems. The aim of the present study was to investigate the interactive effects of temperature and UVR by comparing the photosynthetic responses of similar taxa of Chlorella from Antarctic (Chlorella UMACC 237), temperate (Chlorella vulgaris UMACC 248) and tropical (Chlorella vulgaris UMACC 001) environments. The cultures were exposed to three different treatments: photosynthetically active radiation (PAR; 400–700 nm), PAR plus ultraviolet-A (320–400 nm) radiation (PAR + UV-A) and PAR plus UV-A and ultraviolet-B (280–320 nm) radiation (PAR + UV-A + UV-B) for one hour in incubators set at different temperatures. The Antarctic Chlorella was exposed to 4, 14 and 20°C. The temperate Chlorella was exposed to 11, 18 and 25°C while the tropical Chlorella was exposed to 24, 28 and 30°C. A pulse-amplitude modulated (PAM) fluorometer was used to assess the photosynthetic response of microalgae. Parameters such as the photoadaptive index (Ek) and light harvesting efficiency (α) were determined from rapid light curves. The damage (k) and repair (r) rates were calculated from the decrease in ΦPSIIeff over time during exposure response curves where cells were exposed to the various combinations of PAR and UVR, and fitting the data to the Kok model. The results showed that UV-A caused much lower inhibition than UV-B in photosynthesis in all Chlorella isolates. The three isolates of Chlorella from different regions showed different trends in their photosynthesis responses under the combined effects of UVR (PAR + UV-A + UV-B) and temperature. In accordance with the noted strain-specific characteristics, we can conclude that the repair (r) mechanisms at higher temperatures were not sufficient to overcome damage caused by UVR in the Antarctic Chlorella strain

  13. Hantaan virus surveillance targeting small mammals at nightmare range, a high elevation military training area, Gyeonggi Province, Republic of Korea.

    PubMed

    Klein, Terry A; Kim, Heung-Chul; Chong, Sung-Tae; Kim, Jeong-Ah; Lee, Sook-Young; Kim, Won-Keun; Nunn, Peter V; Song, Jin-Won

    2015-01-01

    Rodent-borne disease surveillance was conducted at Nightmare Range (NM-R), near the demilitarized zone in northeast Gyeonggi Province, Republic of Korea, to identify hemorrhagic fever with renal syndrome (HFRS) risks for a mountainous high-elevation (500 m) military training site. Monthly surveys were conducted from January 2008-December 2009. A total of 1,720 small mammals were captured belonging to the Orders Rodentia [Families, Sciuridae (1 species) and Muridae (7 species)] and Soricomorpha [Family, Soricidae (1species)]. Apodemus agrarius, the primary reservoir for Hantaan virus (HTNV), accounted for 89.9% (1,546) of all small mammals captured, followed by Myodes regulus (4.0%), Crocidura lasiura (3.9%), Micromys minutus (1.4%), Mus musculus (0.3%), Microtus fortis (0.2%), Apodemus peninsulae (0.2%), Tamias sibiricus (0.1%), and Rattus norvegicus (<0.1%). Three species were antibody-positive (Ab+) for hantaviruses: A. agrarius (8.2%), M. minutus (4.2%), and C. lasiura (1.5%). HTNV specific RNA was detected in 93/127 Ab+ A. agrarius, while Imjin virus specific RNA was detected in 1/1 Ab+ C. lasiura. Overall, hantavirus Ab+ rates for A. agrarius increased with weight (age) and were significantly higher among males (10.9%) than females (5.1%) (P<0.0001). High A. agrarius gravid rates during the fall (August-September) were associated with peak numbers of HFRS cases in Korea that followed high gravid rates. From 79 RT-PCR positive A. agrarius, 12 HTNV RNA samples were sequenced and compared phylogenetically based on a 320 nt sequence from the GC glycoprotein-encoding M segment. These results demonstrate that the HTNV isolates from NM-R are distinctly separated from HTNV isolated from the People's Republic of China. These studies provide for improved disease risk assessments that identify military activities, rodent HTNV rates, and other factors associated with the transmission of hantaviruses during field training exercises.

  14. Photoactivated polycyclic aromatic hydrocarbon toxicity in medaka (Oryzias latipes) embryos: relevance to environmental risk in contaminated sites.

    PubMed

    Diamond, Stephen A; Mount, David R; Mattson, Vincent R; Heinis, Larry J; Highland, Terry L; Adams, Andy D; Simcik, Matthew F

    2006-11-01

    The hazard for photoactivated toxicity of polycyclic aromatic hydrocarbons (PAHs) has been clearly demonstrated; however, to our knowledge, the risk in contaminated systems has not been characterized. To address this question, a median lethal dose (LD50) for fluoranthene photoactivated toxicity in medaka (Orvzias latipes) embryos was determined experimentally and then compared with ultraviolet-A (UV-A; 320-400 nm) radiation exposures in a PAH-contaminated field site. The dose metric, J/cm2/ microg fluoranthene/g egg wet weight, provided the means to estimate risk as the depth where the LD50 level would be exceeded at realistic field PAH concentrations, based on estimates of UV-A exposure. The estimates were made using 30 years of solar radiation data for Duluth (MN, USA) and measurements of water-column UV-A transmittance in a PAH-contaminated field site. Medaka embryo failure was strongly related to tissue PAH concentration and UV-A exposure. The LD50 was estimated to be 12.64 J/cm2/ microg fluoranthene/g egg wet weight; the 95% confidence interval was 8.46 to 19.7 J/cm2/microg fluoranthene/g egg wet weight. Embryo failures were characterized by undifferentiated cell proliferation that occurred very early in development. No partial effects or embryo/larval malformations were observed. Estimates of the depth at which the LD50 would be exceeded in the contaminated field site ranged from 10.7 cm (clear-sky conditions and lowest attenuation) to 0.0 cm (cloudy conditions and highest attenuation). Similar calculations were done using water-column attenuation estimates from 12 sites across the Great Lakes (USA). For these, the depths at which the LD50 would be exceeded ranged from 0.00 to 271.6 cm under the conditions described above. These results suggest that PAH phototoxicity may be a risk factor in specific contaminated sites, and they provide a framework for assessing that risk. PMID:17089726

  15. Description of various test scenarios for temporary blinding of pilots by means of bright optical radiation during darkness

    NASA Astrophysics Data System (ADS)

    Reidenbach, Hans-Dieter

    2011-06-01

    Up to now the knowledge is limited as far as adverse effects are concerned which are the result of temporary blinding from high brightness optical products, like laser pointers, but it is mandatory to be aware of the degree and influence on various visual functions of persons performing challenging activities, especially under mesopic or even scotopic conditions. Therefore various test scenarios have been designed in the laboratory and bright optical radiation from highbrightness LEDs and laser products applied as light sources in order to simulate the temporary blinding of pilots during a night-flight, especially during landing. As an important realistic test object the primary flight display (PFD) of a commercial aircraft has been integrated in the respective test set-up and various alignments on the PFD could be adjusted in order to measure the time duration which is needed to regain the ability to read the respective data on the PFD after an exposure. The pilot's flight deck lighting situation from a full flight simulator A 320 has been incorporated in the test scenarios. The level of exposure of the subjects has been limited well below the maximum permissible exposure (MPE) and the exposure duration was chosen up to a maximum of 10 s. A total of 28 subjects have been included in various tests. As a critical value especially the visual search time (VST) was determined. A significant increase of VST between 2.5 s and 8 s after foveal irradiation has been determined in a specially designed test with a primary flight display (PFD) whereas an increase of 9.1 s for peripheral and 9.9 s for frontal irradiation resulted in an exercise (flight maneuver) with a Microsoft flight-simulator. Various pupil diameters and aversion responses of the subjects during the irradiation might be responsible for the relatively large spread of data, but on the other hand a simple mean value would not comply with the spectrum of functional relationships and possible individual inherent

  16. Radiation hardness assessment of the charge-integrating hybrid pixel detector JUNGFRAU 1.0 for photon science

    NASA Astrophysics Data System (ADS)

    Jungmann-Smith, J. H.; Bergamaschi, A.; Brückner, M.; Cartier, S.; Dinapoli, R.; Greiffenberg, D.; Jaggi, A.; Maliakal, D.; Mayilyan, D.; Medjoubi, K.; Mezza, D.; Mozzanica, A.; Ramilli, M.; Ruder, Ch.; Schädler, L.; Schmitt, B.; Shi, X.; Tinti, G.

    2015-12-01

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications in free electron lasers, particularly SwissFEL, and synchrotron light sources. JUNGFRAU is an automatic gain switching, charge-integrating detector which covers a dynamic range of more than 104 photons of an energy of 12 keV with a good linearity, uniformity of response, and spatial resolving power. The JUNGFRAU 1.0 application-specific integrated circuit (ASIC) features a 256 × 256 pixel matrix of 75 × 75 μm2 pixels and is bump-bonded to a 320 μm thick Si sensor. Modules of 2 × 4 chips cover an area of about 4 × 8 cm2. Readout rates in excess of 2 kHz enable linear count rate capabilities of 20 MHz (at 12 keV) and 50 MHz (at 5 keV). The tolerance of JUNGFRAU to radiation is a key issue to guarantee several years of operation at free electron lasers and synchrotrons. The radiation hardness of JUNGFRAU 1.0 is tested with synchrotron radiation up to 10 MGy of delivered dose. The effect of radiation-induced changes on the noise, baseline, gain, and gain switching is evaluated post-irradiation for both the ASIC and the hybridized assembly. The bare JUNGFRAU 1.0 chip can withstand doses as high as 10 MGy with minor changes to its noise and a reduction in the preamplifier gain. The hybridized assembly, in particular the sensor, is affected by the photon irradiation which mainly shows as an increase in the leakage current. Self-healing of the system is investigated during a period of 11 weeks after the delivery of the radiation dose. Annealing radiation-induced changes by bake-out at 100 °C is investigated. It is concluded that the JUNGFRAU 1.0 pixel is sufficiently radiation-hard for its envisioned applications at SwissFEL and synchrotron beam lines.

  17. Molecular cloning and sequence analysis of the gene encoding OmpL1, a transmembrane outer membrane protein of pathogenic Leptospira spp.

    PubMed Central

    Haake, D A; Champion, C I; Martinich, C; Shang, E S; Blanco, D R; Miller, J N; Lovett, M A

    1993-01-01

    Pathogenic Leptospira spp. are spirochetes that have a low transmembrane outer membrane protein content relative to that of enteric gram-negative bacteria. In a previous study we identified a 31-kDa surface protein that was present in strains of Leptospira alstoni in amounts which correlated with the outer membrane particle density observed by freeze fracture electron microscopy (D. A. Haake, E. M. Walker, D. R. Blanco, C. A. Bolin, J. N. Miller, and M. A. Lovett, Infect. Immun. 59:1131-1140, 1991). The N-terminal amino acid sequence was used to design a pair of oligonucleotides which were utilized to screen a lambda ZAP II library containing EcoRI fragments of L. alstoni DNA. A 2.5-kb DNA fragment which contained the entire structural ompL1 gene was identified. The structural gene deduced from the sequence of this DNA fragment would encode a 320-amino-acid polypeptide with a 24-amino-acid leader peptide and a leader peptidase I cleavage site. Processing of OmpL1 results in a mature protein with a predicted molecular mass of 31,113 Da. Secondary-structure prediction identified repeated stretches of amphipathic beta-sheets typical of outer membrane protein membrane-spanning sequences. A topological model of OmpL1 containing 10 transmembrane segments is suggested. A recombinant OmpL1 fusion protein was expressed in Escherichia coli in order to immunize rabbits with the purified protein. Upon Triton X-114 extraction of L. alstoni and phase separation, anti-OmpL1 antiserum recognized a single band on immunoblots of the hydrophobic detergent fraction which was not present in the hydrophilic aqueous fraction. Immunoelectron microscopy with anti-OmpL1 antiserum demonstrates binding to the surface of intact L. alstoni. DNA hybridization studies indicate that the ompL1 gene is present in a single copy in all pathogenic Leptospira species that have been tested and is absent in nonpathogenic Leptospira species. OmpL1 may be the first spirochetal transmembrane outer membrane

  18. Visible and Infrared Wavefront Sensing detectors review in Europe - part I

    NASA Astrophysics Data System (ADS)

    Feautrier, Philippe; Gach, Jean-luc

    2013-12-01

    using ultra low noise Avalanche Photodiode (APD) arrays within the RAPID project. Developed by the SOFRADIR and CEA/LETI manufacturers, the latter offers a 320x240 8 outputs 30 microns IR array, sensitive from 0.4 to 3 microns, with 2 e readout noise at 1500 Hz frame rate. The 2e readout noise of RAPID will be first shown in this conference. The high QE response is almost flat over this wavelength range. Advanced packaging with miniature cryostat using liquid nitrogen free pulse tube.

  19. A thermal inertia model for soil water content retrieval using thermal and multispectral images

    NASA Astrophysics Data System (ADS)

    Maltese, A.; Minacapilli, M.; Cammalleri, C.; Ciraolo, G.; D'Asaro, F.

    2010-10-01

    Soil moisture is difficult to quantify because of its high spatial variability. Consequently, great efforts have been undertaken by the research community to develop practical remote sensing approaches to estimate the spatial distribution of surface soil moisture over large areas and with high spatial detail. Many methodologies have been developed using remote sensing data acquiring information in different parts of the electromagnetic spectrum. Conventional field measurement techniques (including gravimetric and time-domain reflectometry) are point-based, involve on-site operators, are time expensive and, in any case, do not provide exhaustive information on the spatial distribution of soil moisture because it strongly depends on pedology, soil roughness and vegetation cover. The technological development of imaging sensors acquiring in the visible (VIS), near infrared (NIR) and thermal infrared (TIR), renewed the research interest in setting up remote sensed based techniques aimed to retrieve soil water content variability in the soil-plant-atmosphere system (SPA). In this context different approaches have been widely applied at regional scale throughout synthetic indexes based on VIS, NIR and TIR spectral bands. A laboratory experiment has been carried out to verify a physically based model based on the remote estimation of the soil thermal inertia, P, to indirectly retrieve the soil surface water content, θ. The paper shows laboratory retrievals using simultaneously a FLIR A320G thermal camera, a six bands customized TETRACAM MCA II (Multiple Camera Array) multispectral camera working in the VIS/NIR part of the spectrum. Using these two type of sensors a set of VIS/NIR and TIR images were acquired as the main input dataset to retrieve the spatial variability of the thermal inertia values. Moreover, given that the accuracy of the proposed approach strongly depends on the accurate estimation of the soil thermal conductivity, a Decagon Device KD2 PRO thermal

  20. Interactive Effects of Temperature and UV Radiation on Photosynthesis of Chlorella Strains from Polar, Temperate and Tropical Environments: Differential Impacts on Damage and Repair.

    PubMed

    Wong, Chiew-Yen; Teoh, Ming-Li; Phang, Siew-Moi; Lim, Phaik-Eem; Beardall, John

    2015-01-01

    Global warming and ozone depletion, and the resulting increase of ultraviolet radiation (UVR), have far-reaching impacts on biota, especially affecting the algae that form the basis of the food webs in aquatic ecosystems. The aim of the present study was to investigate the interactive effects of temperature and UVR by comparing the photosynthetic responses of similar taxa of Chlorella from Antarctic (Chlorella UMACC 237), temperate (Chlorella vulgaris UMACC 248) and tropical (Chlorella vulgaris UMACC 001) environments. The cultures were exposed to three different treatments: photosynthetically active radiation (PAR; 400-700 nm), PAR plus ultraviolet-A (320-400 nm) radiation (PAR + UV-A) and PAR plus UV-A and ultraviolet-B (280-320 nm) radiation (PAR + UV-A + UV-B) for one hour in incubators set at different temperatures. The Antarctic Chlorella was exposed to 4, 14 and 20°C. The temperate Chlorella was exposed to 11, 18 and 25°C while the tropical Chlorella was exposed to 24, 28 and 30°C. A pulse-amplitude modulated (PAM) fluorometer was used to assess the photosynthetic response of microalgae. Parameters such as the photoadaptive index (Ek) and light harvesting efficiency (α) were determined from rapid light curves. The damage (k) and repair (r) rates were calculated from the decrease in ΦPSIIeff over time during exposure response curves where cells were exposed to the various combinations of PAR and UVR, and fitting the data to the Kok model. The results showed that UV-A caused much lower inhibition than UV-B in photosynthesis in all Chlorella isolates. The three isolates of Chlorella from different regions showed different trends in their photosynthesis responses under the combined effects of UVR (PAR + UV-A + UV-B) and temperature. In accordance with the noted strain-specific characteristics, we can conclude that the repair (r) mechanisms at higher temperatures were not sufficient to overcome damage caused by UVR in the Antarctic Chlorella strain

  1. Hantaan Virus Surveillance Targeting Small Mammals at Nightmare Range, a High Elevation Military Training Area, Gyeonggi Province, Republic of Korea

    PubMed Central

    Klein, Terry A.; Kim, Heung-Chul; Chong, Sung-Tae; Kim, Jeong-Ah; Lee, Sook-Young; Kim, Won-Keun; Nunn, Peter V.; Song, Jin-Won

    2015-01-01

    Rodent-borne disease surveillance was conducted at Nightmare Range (NM-R), near the demilitarized zone in northeast Gyeonggi Province, Republic of Korea, to identify hemorrhagic fever with renal syndrome (HFRS) risks for a mountainous high-elevation (500 m) military training site. Monthly surveys were conducted from January 2008-December 2009. A total of 1,720 small mammals were captured belonging to the Orders Rodentia [Families, Sciuridae (1 species) and Muridae (7 species)] and Soricomorpha [Family, Soricidae (1species)]. Apodemus agrarius, the primary reservoir for Hantaan virus (HTNV), accounted for 89.9% (1,546) of all small mammals captured, followed by Myodes regulus (4.0%), Crocidura lasiura (3.9%), Micromys minutus (1.4%), Mus musculus (0.3%), Microtus fortis (0.2%), Apodemus peninsulae (0.2%), Tamias sibiricus (0.1%), and Rattus norvegicus (<0.1%). Three species were antibody-positive (Ab+) for hantaviruses: A. agrarius (8.2%), M. minutus (4.2%), and C. lasiura (1.5%). HTNV specific RNA was detected in 93/127 Ab+ A. agrarius, while Imjin virus specific RNA was detected in 1/1 Ab+ C. lasiura. Overall, hantavirus Ab+ rates for A. agrarius increased with weight (age) and were significantly higher among males (10.9%) than females (5.1%) (P<0.0001). High A. agrarius gravid rates during the fall (August-September) were associated with peak numbers of HFRS cases in Korea that followed high gravid rates. From 79 RT-PCR positive A. agrarius, 12 HTNV RNA samples were sequenced and compared phylogenetically based on a 320 nt sequence from the GC glycoprotein-encoding M segment. These results demonstrate that the HTNV isolates from NM-R are distinctly separated from HTNV isolated from the People’s Republic of China. These studies provide for improved disease risk assessments that identify military activities, rodent HTNV rates, and other factors associated with the transmission of hantaviruses during field training exercises. PMID:25874643

  2. Core Noise: Implications of Emerging N+3 Designs and Acoustic Technology Needs

    NASA Technical Reports Server (NTRS)

    Hultgren, Lennart S.

    2011-01-01

    This presentation is a summary of the core-noise implications of NASA's primary N+3 aircraft concepts. These concepts are the MIT/P&W D8.5 Double Bubble design, the Boeing/GE SUGAR Volt hybrid gas-turbine/electric engine concept, the NASA N3-X Turboelectric Distributed Propulsion aircraft, and the NASA TBW-XN Truss-Braced Wing concept. The first two are future concepts for the Boeing 737/Airbus A320 US transcontinental mission of 180 passengers and a maximum range of 3000 nm. The last two are future concepts for the Boeing 777 transpacific mission of 350 passengers and a 7500 nm range. Sections of the presentation cover: turbofan design trends on the N+1.5 time frame and the already emerging importance of core noise; the NASA N+3 concepts and associated core-noise challenges; the historical trends for the engine bypass ratio (BPR), overall pressure ratio (OPR), and combustor exit temperature; and brief discussion of a noise research roadmap being developed to address the core-noise challenges identified for the N+3 concepts. The N+3 conceptual aircraft have (i) ultra-high bypass ratios, in the rage of 18 - 30, accomplished by either having a small-size, high-power-density core, an hybrid design which allows for an increased fan size, or by utilizing a turboelectric distributed propulsion design; and (ii) very high OPR in the 50 - 70 range. These trends will elevate the overall importance of turbomachinery core noise. The N+3 conceptual designs specify the need for the development and application of advanced liners and passive and active control strategies to reduce the core noise. Current engineering prediction of core noise uses semi-empirical methods based on older turbofan engines, with (at best) updates for more recent designs. The models have not seen the same level of development and maturity as those for fan and jet noise and are grossly inadequate for the designs considered for the N+3 time frame. An aggressive program for the development of updated noise

  3. Radiation hardness assessment of the charge-integrating hybrid pixel detector JUNGFRAU 1.0 for photon science.

    PubMed

    Jungmann-Smith, J H; Bergamaschi, A; Brückner, M; Cartier, S; Dinapoli, R; Greiffenberg, D; Jaggi, A; Maliakal, D; Mayilyan, D; Medjoubi, K; Mezza, D; Mozzanica, A; Ramilli, M; Ruder, Ch; Schädler, L; Schmitt, B; Shi, X; Tinti, G

    2015-12-01

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications in free electron lasers, particularly SwissFEL, and synchrotron light sources. JUNGFRAU is an automatic gain switching, charge-integrating detector which covers a dynamic range of more than 10(4) photons of an energy of 12 keV with a good linearity, uniformity of response, and spatial resolving power. The JUNGFRAU 1.0 application-specific integrated circuit (ASIC) features a 256 × 256 pixel matrix of 75 × 75 μm(2) pixels and is bump-bonded to a 320 μm thick Si sensor. Modules of 2 × 4 chips cover an area of about 4 × 8 cm(2). Readout rates in excess of 2 kHz enable linear count rate capabilities of 20 MHz (at 12 keV) and 50 MHz (at 5 keV). The tolerance of JUNGFRAU to radiation is a key issue to guarantee several years of operation at free electron lasers and synchrotrons. The radiation hardness of JUNGFRAU 1.0 is tested with synchrotron radiation up to 10 MGy of delivered dose. The effect of radiation-induced changes on the noise, baseline, gain, and gain switching is evaluated post-irradiation for both the ASIC and the hybridized assembly. The bare JUNGFRAU 1.0 chip can withstand doses as high as 10 MGy with minor changes to its noise and a reduction in the preamplifier gain. The hybridized assembly, in particular the sensor, is affected by the photon irradiation which mainly shows as an increase in the leakage current. Self-healing of the system is investigated during a period of 11 weeks after the delivery of the radiation dose. Annealing radiation-induced changes by bake-out at 100 °C is investigated. It is concluded that the JUNGFRAU 1.0 pixel is sufficiently radiation-hard for its envisioned applications at SwissFEL and synchrotron beam lines.

  4. Mechanical Design of High Lift Systems for High Aspect Ratio Swept Wings

    NASA Technical Reports Server (NTRS)

    Rudolph, Peter K. C.

    1998-01-01

    The NASA Ames Research Center is working to develop a methodology for the optimization and design of the high lift system for future subsonic airliners with the involvement of two partners. Aerodynamic analysis methods for two dimensional and three dimensional wing performance with flaps and slats deployed are being developed through a grant with the aeronautical department of the University of California Davis, and a flap and slat mechanism design procedure is being developed through a contract with PKCR, Inc., of Seattle, WA. This report documents the work that has been completed in the contract with PKCR on mechanism design. Flap mechanism designs have been completed for seven (7) different mechanisms with a total of twelve (12) different layouts all for a common single slotted flap configuration. The seven mechanisms are as follows: Simple Hinge, Upside Down/Upright Four Bar Linkage (two layouts), Upside Down Four Bar Linkages (three versions), Airbus A330/340 Link/Track Mechanism, Airbus A320 Link/Track Mechanism (two layouts), Boeing Link/Track Mechanism (two layouts), and Boeing 767 Hinged Beam Four Bar Linkage. In addition, a single layout has been made to investigate the growth potential from a single slotted flap to a vane/main double slotted flap using the Boeing Link/Track Mechanism. All layouts show Fowler motion and gap progression of the flap from stowed to a fully deployed position, and evaluations based on spanwise continuity, fairing size and number, complexity, reliability and maintainability and weight as well as Fowler motion and gap progression are presented. For slat design, the options have been limited to mechanisms for a shallow leading edge slat. Three (3) different layouts are presented for maximum slat angles of 20 deg, 15 deg and 1O deg all mechanized with a rack and pinion drive similar to that on the Boeing 757 airplane. Based on the work of Ljungstroem in Sweden, this type of slat design appears to shift the lift curve so that

  5. The Integrated Mode Management Interface

    NASA Technical Reports Server (NTRS)

    Hutchins, Edwin

    1996-01-01

    Mode management is the processes of understanding the character and consequences of autoflight modes, planning and selecting the engagement, disengagement and transitions between modes, and anticipating automatic mode transitions made by the autoflight system itself. The state of the art is represented by the latest designs produced by each of the major airframe manufacturers, the Boeing 747-400, the Boeing 777, the McDonnell Douglas MD-11, and the Airbus A320/A340 family of airplanes. In these airplanes autoflight modes are selected by manipulating switches on the control panel. The state of the autoflight system is displayed on the flight mode annunciators. The integrated mode management interface (IMMI) is a graphical interface to autoflight mode management systems for aircraft equipped with flight management computer systems (FMCS). The interface consists of a vertical mode manager and a lateral mode manager. Autoflight modes are depicted by icons on a graphical display. Mode selection is accomplished by touching (or mousing) the appropriate icon. The IMMI provides flight crews with an integrated interface to autoflight systems for aircraft equipped with flight management computer systems (FMCS). The current version is modeled on the Boeing glass-cockpit airplanes (747-400, 757/767). It runs on the SGI Indigo workstation. A working prototype of this graphics-based crew interface to the autoflight mode management tasks of glass cockpit airplanes has been installed in the Advanced Concepts Flight Simulator of the CSSRF of NASA Ames Research Center. This IMMI replaces the devices in FMCS equipped airplanes currently known as mode control panel (Boeing), flight guidance control panel (McDonnell Douglas), and flight control unit (Airbus). It also augments the functions of the flight mode annunciators. All glass cockpit airplanes are sufficiently similar that the IMMI could be tailored to the mode management system of any modern cockpit. The IMMI does not replace the

  6. Measurement and analysis of aircraft engine PM emissions downwind of an active runway at the Oakland International Airport

    NASA Astrophysics Data System (ADS)

    Lobo, Prem; Hagen, Donald E.; Whitefield, Philip D.

    2012-12-01

    The growth of commercial aviation has fueled concerns over air quality around airports and the surrounding communities. Airports must expand their operations to meet the increase in air traffic, but expansion plans have been delayed or canceled due to concerns over local air quality. This paper presents the methodology for real-time measurements of aircraft engine specific Particulate Matter (PM) emissions and analysis of the associated high resolution data acquired during normal Landing and Take-Off (LTO) operations 100-300 m downwind of an active taxi-/runway at the Oakland International Airport. The airframe-engine combinations studied included B737-300 with CFM56-3B engines, B737-700/800 with CFM56-7B engines, A320 with V2500-A5 engines, MD-80 with JT-8D engines, A300 with CF6-80 engines, DC-10 with CF6-50 engines, and CRJ-100/200 with CF34-3B engines. For all engine types studied, the size distributions were typically bimodal in nature with a nucleation mode comprised of freshly nucleated PM and an accumulation mode comprised mostly of PM soot with some condensed volatile material. The PM number-based emission index observed ranged between 7 × 1015-3 × 1017 particles kg-1 fuel burned at idle/taxi and between 4 × 1015-2 × 1017 particles kg-1 fuel burned at take-off, and the associated PM mass-based emission index (EIm) ranged between 0.1 and 0.7 g kg-1 fuel burned at both the idle/taxi and take-off conditions. Older technology engines such as the CFM56-3B and JT8D engines were observed to have as much as 3× higher PM EIm values at take-off compared to newer engine technology such as the CFM56-7B engine. The results from this study provide information for better characterizing evolving PM emissions from in-service commercial aircraft under normal LTO operations and assessing their impact on local and regional air quality and health related impacts.

  7. Interactive Effects of Temperature and UV Radiation on Photosynthesis of Chlorella Strains from Polar, Temperate and Tropical Environments: Differential Impacts on Damage and Repair.

    PubMed

    Wong, Chiew-Yen; Teoh, Ming-Li; Phang, Siew-Moi; Lim, Phaik-Eem; Beardall, John

    2015-01-01

    Global warming and ozone depletion, and the resulting increase of ultraviolet radiation (UVR), have far-reaching impacts on biota, especially affecting the algae that form the basis of the food webs in aquatic ecosystems. The aim of the present study was to investigate the interactive effects of temperature and UVR by comparing the photosynthetic responses of similar taxa of Chlorella from Antarctic (Chlorella UMACC 237), temperate (Chlorella vulgaris UMACC 248) and tropical (Chlorella vulgaris UMACC 001) environments. The cultures were exposed to three different treatments: photosynthetically active radiation (PAR; 400-700 nm), PAR plus ultraviolet-A (320-400 nm) radiation (PAR + UV-A) and PAR plus UV-A and ultraviolet-B (280-320 nm) radiation (PAR + UV-A + UV-B) for one hour in incubators set at different temperatures. The Antarctic Chlorella was exposed to 4, 14 and 20°C. The temperate Chlorella was exposed to 11, 18 and 25°C while the tropical Chlorella was exposed to 24, 28 and 30°C. A pulse-amplitude modulated (PAM) fluorometer was used to assess the photosynthetic response of microalgae. Parameters such as the photoadaptive index (Ek) and light harvesting efficiency (α) were determined from rapid light curves. The damage (k) and repair (r) rates were calculated from the decrease in ΦPSIIeff over time during exposure response curves where cells were exposed to the various combinations of PAR and UVR, and fitting the data to the Kok model. The results showed that UV-A caused much lower inhibition than UV-B in photosynthesis in all Chlorella isolates. The three isolates of Chlorella from different regions showed different trends in their photosynthesis responses under the combined effects of UVR (PAR + UV-A + UV-B) and temperature. In accordance with the noted strain-specific characteristics, we can conclude that the repair (r) mechanisms at higher temperatures were not sufficient to overcome damage caused by UVR in the Antarctic Chlorella strain

  8. Investigation of lung nodule detectability in low-dose 320-slice computed tomography

    SciTech Connect

    Silverman, J. D.; Paul, N. S.; Siewerdsen, J. H.

    2009-05-15

    Low-dose imaging protocols in chest CT are important in the screening and surveillance of suspicious and indeterminate lung nodules. Techniques that maintain nodule detectability yet permit dose reduction, particularly for large body habitus, were investigated. The objective of this study was to determine the extent to which radiation dose can be minimized while maintaining diagnostic performance through knowledgeable selection of reconstruction techniques. A 320-slice volumetric CT scanner (Aquilion ONE, Toshiba Medical Systems) was used to scan an anthropomorphic phantom at doses ranging from {approx}0.1 mGy up to that typical of low-dose CT (LDCT, {approx}5 mGy) and diagnostic CT ({approx}10 mGy). Radiation dose was measured via Farmer chamber and MOSFET dosimetry. The phantom presented simulated nodules of varying size and contrast within a heterogeneous background, and chest thickness was varied through addition of tissue-equivalent bolus about the chest. Detectability of a small solid lung nodule (3.2 mm diameter, -37 HU, typically the smallest nodule of clinical significance in screening and surveillance) was evaluated as a function of dose, patient size, reconstruction filter, and slice thickness by means of nine-alternative forced-choice (9AFC) observer tests to quantify nodule detectability. For a given reconstruction filter, nodule detectability decreased sharply below a threshold dose level due to increased image noise, especially for large body size. However, nodule detectability could be maintained at lower doses through knowledgeable selection of (smoother) reconstruction filters. For large body habitus, optimal filter selection reduced the dose required for nodule detection by up to a factor of {approx}3 (from {approx}3.3 mGy for sharp filters to {approx}1.0 mGy for the optimal filter). The results indicate that radiation dose can be reduced below the current low-dose (5 mGy) and ultralow-dose (1 mGy) levels with knowledgeable selection of

  9. Automated Voxel-Based Analysis of Volumetric Dynamic Contrast-Enhanced CT Data Improves Measurement of Serial Changes in Tumor Vascular Biomarkers

    SciTech Connect

    Coolens, Catherine; Driscoll, Brandon; Chung, Caroline; Shek, Tina; Gorjizadeh, Alborz; Ménard, Cynthia; Jaffray, David

    2015-01-01

    Objectives: Development of perfusion imaging as a biomarker requires more robust methodologies for quantification of tumor physiology that allow assessment of volumetric tumor heterogeneity over time. This study proposes a parametric method for automatically analyzing perfused tissue from volumetric dynamic contrast-enhanced (DCE) computed tomography (CT) scans and assesses whether this 4-dimensional (4D) DCE approach is more robust and accurate than conventional, region-of-interest (ROI)-based CT methods in quantifying tumor perfusion with preliminary evaluation in metastatic brain cancer. Methods and Materials: Functional parameter reproducibility and analysis of sensitivity to imaging resolution and arterial input function were evaluated in image sets acquired from a 320-slice CT with a controlled flow phantom and patients with brain metastases, whose treatments were planned for stereotactic radiation surgery and who consented to a research ethics board-approved prospective imaging biomarker study. A voxel-based temporal dynamic analysis (TDA) methodology was used at baseline, at day 7, and at day 20 after treatment. The ability to detect changes in kinetic parameter maps in clinical data sets was investigated for both 4D TDA and conventional 2D ROI-based analysis methods. Results: A total of 7 brain metastases in 3 patients were evaluated over the 3 time points. The 4D TDA method showed improved spatial efficacy and accuracy of perfusion parameters compared to ROI-based DCE analysis (P<.005), with a reproducibility error of less than 2% when tested with DCE phantom data. Clinically, changes in transfer constant from the blood plasma into the extracellular extravascular space (K{sub trans}) were seen when using TDA, with substantially smaller errors than the 2D method on both day 7 post radiation surgery (±13%; P<.05) and by day 20 (±12%; P<.04). Standard methods showed a decrease in K{sub trans} but with large uncertainty (111.6 ± 150.5) %. Conclusions

  10. Kilovoltage Rotational External Beam Radiotherapy on a Breast Computed Tomography Platform: A Feasibility Study

    SciTech Connect

    Prionas, Nicolas D.; McKenney, Sarah E.; Stern, Robin L.; Boone, John M.

    2012-10-01

    Purpose: To demonstrate the feasibility of a dedicated breast computed tomography (bCT) platform to deliver rotational kilovoltage (kV) external beam radiotherapy (RT) for partial breast irradiation, whole breast irradiation, and dose painting. Methods and Materials: Rotational kV-external beam RT using the geometry of a prototype bCT platform was evaluated using a Monte Carlo simulator. A point source emitting 178 keV photons (approximating a 320-kVp spectrum with 4-mm copper filtration) was rotated around a 14-cm voxelized polyethylene disk (0.1 cm tall) or cylinder (9 cm tall) to simulate primary and primary plus scattered photon interactions, respectively. Simulations were also performed using voxelized bCT patient images. Beam collimation was varied in the x-y plane (1-14 cm) and in the z-direction (0.1-10 cm). Dose painting for multiple foci, line, and ring distributions was demonstrated using multiple rotations with varying beam collimation. Simulations using the scanner's native hardware (120 kVp filtered by 0.2-mm copper) were validated experimentally. Results: As the x-y collimator was narrowed, the two-dimensional dose profiles shifted from a cupped profile with a high edge dose to an increasingly peaked central dose distribution with a sharp dose falloff. Using a 1-cm beam, the cylinder edge dose was <7% of the dose deposition at the cylinder center. Simulations using 120-kVp X-rays showed distributions similar to the experimental measurements. A homogeneous dose distribution (<2.5% dose fluctuation) with a 20% decrease in dose deposition at the cylinder edge (i.e., skin sparing) was demonstrated by weighted summation of four dose profiles using different collimation widths. Simulations using patient bCT images demonstrated the potential for treatment planning and image-guided RT. Conclusions: Rotational kV-external beam RT for partial breast irradiation, dose painting, and whole breast irradiation with skin sparing is feasible on a bCT platform with

  11. Impact of ultraviolet radiation on cell structure, UV-absorbing compounds, photosynthesis, DNA damage, and germination in zoospores of Arctic Saccorhiza dermatodea.

    PubMed

    Roleda, Michael Y; Wiencke, Christian; Lüder, Ulrike H

    2006-01-01

    Stratospheric ozone depletion leads to enhanced UV-B radiation. Therefore, the capacity of reproductive cells to cope with different spectral irradiance was investigated in the laboratory. Zoospores of the upper sublittoral kelp Saccorhiza dermatodea were exposed to varying fluence of spectral irradiance consisting of photosynthetically active radiation (PAR, 400-700 nm; =P), PAR+UV-A radiation (UV-A, 320-400 nm; =PA), and PAR+UV-A+UV-B radiation (UV-B, 280-320 nm; =PAB). Structural changes, localization of phlorotannin-containing physodes, accumulation of UV-absorbing phlorotannins, and physiological responses of zoospores were measured after exposure treatments as well as after 2-6 d recovery in dim white light (8 mumol photon m(-2) s(-1)). Physodes increased in size under PAB treatment. Extrusion of phlorotannins into the medium and accumulation of physodes was induced not only under UVR treatment but also under PAR. UV-B radiation caused photodestruction indicated by a loss of pigmentation. Photosynthetic efficiency of spores was photoinhibited after 8 h exposure to 22 and 30 mumol photon m(-2) s(-1) of PAR, while supplement of UVR had a significant additional effect on photoinhibition. A relatively low recovery of photosystem II function was observed after 2 d recovery in spores exposed to 1.7 x 10(4) J m(-2) of UV-B, with a germination rate of only 49% of P treatment after 6 d recovery. The amount of UV-B-induced DNA damage measured as cyclobutane-pyrimidine dimers (CPDs) increased with the biologically effective UV-B dose (BED(DNA)). Significant removal of CPDs indicating repair of DNA damage was observed after 2 d in low white light. The protective function of phlorotannins has restricted efficiency for a single cell. Within a plume of zoospores, however, each cell can buffer each other and protect the lower layer of spores from excessive radiation. Exudation of phlorotannins into the water can also reduce the impact of UV-B radiation on UV-sensitive spores

  12. Yazoo River Basin (Lower Mississippi River) Hydrologic Observatory

    NASA Astrophysics Data System (ADS)

    Cheng, A.; Davidson, G.; Altinakar, M.; Holt, R.

    2004-12-01

    The proposed Yazoo River Basin Hydrologic Observatory consists of the 34,000 square km Yazoo River watershed in northwestern Mississippi and a 320 km segment of the Mississippi River separated from the watershed by a manmade levee. Discharge from the basin flows from the Yazoo River into the Mississippi River north of Vicksburg, MS. Major streams within the basin include the Yazoo, Tallahatchie, Yalobusha, Coldwater, Yocona, and Big Sunflower Rivers. Four large flood control reservoirs (Arkabutla, Enid, Sardis, and Grenada) and two national forests (Delta and Holly Springs) are also located within the basin. The watershed is divided between upland forested hills and intensively cultivated lowlands. The lowland area, locally known as the "Delta", lies on the ancestral floodplain of the Mississippi River. Flooding by the Mississippi River was once a common event, but is now limited by the levee system. Abundant wetlands occupy abandoned stream channels throughout the Delta. The Yazoo River Basin has many unique features that make it an attractive site for an Hydrologic Observatory. Example features and issues of scientific interest include: 1) Extensive system of levees which have altered recharge to the regional aquifer, shifted population centers, and created backwater flooding areas. 2) Abundant wetlands with a century-long history of response to agricultural sediment and chemical fluxes. 3) Erosion of upland streams, and stream sediment loads that are the highest in the nation. 4) Groundwater mining in spite of abundant precipitation due to a regional surface clay layer that limits infiltration. 5) A history of agricultural Best Management Practices enabling evaluation of the effectiveness of such measures. 6) Large scale catfish farming with heavy reliance on groundwater. 7) Near enough to the Gulf coast to be impacted by hurricane events. 8) Already existing network of monitoring stations for stream flow, sediment-load, and weather, including complete coverage

  13. Evolution of the Middle Bengal Fan at 8°N in the Oligocene to Pliocene - Preliminary Results from IODP Expedition 354

    NASA Astrophysics Data System (ADS)

    Volkhard, Spiess; Tilmann, Schwenk; Fenna, Bergmann; Christian, France-Lanord; Adam, Klaus

    2016-04-01

    Three deep penetration and additional four shallow sites were drilled during IODP Expedition 354 in the Bay of Bengal at 8°N in February-March 2015 across a 320 km-long transect to study Neogene Bengal fan deposition. The three deeper sites located on top of the elevated crustal features of the Ninetyeast Ridge (Site U1451) and 85°Ridge (Site U1455/DSDP Site 218) as well as central between them (Site U1450) shall provide the stratigraphic framework for the Oligocene to Pliocene reconstruction of fan deposition and sedimentary fluxes driven by monsoon evolution and Himalayan erosion and weathering. Based on shipboard biostratigraphy, drilled material reach back in geologic time to the late Miocene (Site U1450), middle Miocene (Site U1455) and Oligocene (Site U1451). While core recovery was generally severely reduced due to the presence of unconsolidated sand and silt units, half-length APC coring technology provided valuable sand samples/recovery down to ~800 meters below seafloor. Increased compaction/diagenesis of units indicating the temporary absence of fan deposition due to major depocenter shifts, comprising of calcarous clay units of mostly pelagic origin, required a change to rotary coring between 600 and 800 mbsf, and thus the presence of sand is mostly uncertain for those deeper sections. However, derived from penetration rates, a high proportion of sand is anticipated back to early Miocene or Oligocene times. The calcareous clay units serve as stratigraphic marker horizons, which turned out to be suitable for seismic correlation across the drilling transect. This in turn allows to determine sedimentary budgets and overall fan growth for numerous time slices. Recovered sediments have Himalayan mineralogical and geochemical signatures suitable to analyze time series of erosion, weathering and changes in source regions as well as impacts on the global carbon cycle. Miocene shifts in terrestrial vegetation, in sediment budget and in style of sediment

  14. TU-A-12A-09: Absolute Blood Flow Measurement in a Cardiac Phantom Using Low Dose CT

    SciTech Connect

    Ziemer, B; Hubbard, L; Lipinski, J; Molloi, S

    2014-06-15

    Purpose: To investigate a first pass analysis technique to measure absolute flow from low dose CT images in a cardiac phantom. This technique can be combined with a myocardial mass assignment to yield absolute perfusion using only two volume scans and reduce the radiation dose to the patient. Methods: A four-chamber cardiac phantom and perfusion chamber were constructed from poly-acrylic and connected with tubing to approximate anatomical features. The system was connected to a pulsatile pump, input/output reservoirs and power contrast injector. Flow was varied in the range of 1-2.67 mL/s with the pump operating at 60 beats/min. The system was imaged once a second for 14 seconds with a 320-row scanner (Toshiba Medical Systems) using a contrast-enhanced, prospective-gated cardiac perfusion protocol. Flow was calculated by the following steps: subsequent images of the perfusion volume were subtracted to find the contrast entering the volume; this was normalized by an upstream, known volume region to convert Hounsfield (HU) values to concentration; this was divided by the subtracted images time difference. The technique requires a relatively stable input contrast concentration and no contrast can leave the perfusion volume before the flow measurement is completed. Results: The flow calculated from the images showed an excellent correlation with the known rates. The data was fit to a linear function with slope 1.03, intercept 0.02 and an R{sup 2} value of 0.99. The average root mean square (RMS) error was 0.15 mL/s and the average standard deviation was 0.14 mL/s. The flow rate was stable within 7.7% across the full scan and served to validate model assumptions. Conclusion: Accurate, absolute flow rates were measured from CT images using a conservation of mass model. Measurements can be made using two volume scans which can substantially reduce the radiation dose compared with current dynamic perfusion techniques.

  15. Radiation hardness assessment of the charge-integrating hybrid pixel detector JUNGFRAU 1.0 for photon science

    SciTech Connect

    Jungmann-Smith, J. H. Bergamaschi, A.; Brückner, M.; Dinapoli, R.; Greiffenberg, D.; Jaggi, A.; Maliakal, D.; Mayilyan, D.; Mezza, D.; Mozzanica, A.; Ramilli, M.; Ruder, Ch.; Schädler, L.; Schmitt, B.; Shi, X.; Tinti, G.; Cartier, S.; Medjoubi, K.

    2015-12-15

    JUNGFRAU (adJUstiNg Gain detector FoR the Aramis User station) is a two-dimensional hybrid pixel detector for photon science applications in free electron lasers, particularly SwissFEL, and synchrotron light sources. JUNGFRAU is an automatic gain switching, charge-integrating detector which covers a dynamic range of more than 10{sup 4} photons of an energy of 12 keV with a good linearity, uniformity of response, and spatial resolving power. The JUNGFRAU 1.0 application-specific integrated circuit (ASIC) features a 256 × 256 pixel matrix of 75 × 75 μm{sup 2} pixels and is bump-bonded to a 320 μm thick Si sensor. Modules of 2 × 4 chips cover an area of about 4 × 8 cm{sup 2}. Readout rates in excess of 2 kHz enable linear count rate capabilities of 20 MHz (at 12 keV) and 50 MHz (at 5 keV). The tolerance of JUNGFRAU to radiation is a key issue to guarantee several years of operation at free electron lasers and synchrotrons. The radiation hardness of JUNGFRAU 1.0 is tested with synchrotron radiation up to 10 MGy of delivered dose. The effect of radiation-induced changes on the noise, baseline, gain, and gain switching is evaluated post-irradiation for both the ASIC and the hybridized assembly. The bare JUNGFRAU 1.0 chip can withstand doses as high as 10 MGy with minor changes to its noise and a reduction in the preamplifier gain. The hybridized assembly, in particular the sensor, is affected by the photon irradiation which mainly shows as an increase in the leakage current. Self-healing of the system is investigated during a period of 11 weeks after the delivery of the radiation dose. Annealing radiation-induced changes by bake-out at 100 °C is investigated. It is concluded that the JUNGFRAU 1.0 pixel is sufficiently radiation-hard for its envisioned applications at SwissFEL and synchrotron beam lines.

  16. Paleomagnetic and Environmental Magnetic Insights into the Middle to Late Pleistocene Stratigraphy of the 8o North Bengal Fan Transect, IODP Expedition 354

    NASA Astrophysics Data System (ADS)

    Reilly, B. T.; Selkin, P. A.; Meynadier, L.; Savian, J. F.; Weber, M. E.; Schwenk, T.; Spiess, V.; Stoner, J. S.; France-Lanord, C.; Klaus, A.

    2015-12-01

    IODP Expedition 354 cored seven sites along a ~320 km transect of the Bengal Fan at 8o N. Assessing the Pleistocene fan development and depocenter migration in the upper 150-220 m of the Bengal Fan was a primary goal of this expedition. Because any one site includes local variations in depositional processes, the transect approach and accurate stratigraphic correlation of sites is essential to understand overall fan development. Within this transect framework, integrating sediment fluxes across the fan allows for reconstruction of regional climate and tectonic signals through time. A hemipelagic unit deposited at ~1-2.5 cm/ka late in the Matuyama Chron, recording both the Cobb Mountain (1.173 - 1.185 Ma) and Jaramillo (0.988 - 1.072 Ma) Subchrons, was observed at all sites across the transect. This hemipelagic unit provides robust correlation between core derived chronologies and seismic imaging in the Middle Pleistocene. Correlation and orbital tuning of distinctive variations in physical properties (e.g. sediment lightness, wet-bulk density, and magnetic susceptibility) relative to paleomagnetic reversals indicate that turbidite deposition immediately below the base of this unit ceased relatively synchronously across the transect and turbidite deposition likely occurred elsewhere on the fan. The upper bound of the unit, however, is diachronous, with the timing of the onset of turbidite deposition in this part of the fan likely related to the infilling of accommodation space on the Middle Pleistocene fan surface. Stratigraphic constraints on the resumption of turbidite deposition to transect sites include the upper Jaramillo (0.988 Ma) and Matuyama-Bruhnes (0.780 Ma) polarity boundaries and the Oldest Toba Tephra (~0.800 ± 0.020 Ma). The Middle Pleistocene hemipelagic layer and directly overlying turbidites were continuously sampled (u-channels) during Expedition 354. We present initial u-channel magnetic and XRF results to refine the middle to late Pleistocene

  17. Surface temperature and thermal penetration depth of Nd:YAG laser applied to enamel and dentin

    NASA Astrophysics Data System (ADS)

    White, Joel M.; Neev, Joseph; Goodis, Harold E.; Berns, Michael W.

    1992-06-01

    The determination of the thermal effects of Nd:YAG laser energy on enamel and dentin is critical in understanding the clinical applications of caries removal and surface modification. Recently extracted non-carious third molars were sterilized with gamma irradiation. Calculus and cementum were removed using scaling instruments and 600 grit sand paper. The smear layer produced by sanding was removed with a solution of 0.5 M EDTA (pH 7.4) for two minutes. Enamel and dentin surfaces were exposed to a pulsed Nd:YAG laser with 150 microsecond(s) pulse duration. Laser energy was delivered to the teeth with a 320 micrometers diameter fiberoptic delivery system, for exposure times of 1, 10 and 30 seconds. Laser parameters varied from 0.3 to 3.0 W, 10 to 30 Hz and 30 to 150 mJ/pulse. Other conditions included applications of hot coffee, carbide bur in a dental air-cooled turbine drill and soldering iron. Infrared thermography was used to measure the maximum surface temperature on, and thermal penetration distance into enamel and dentin. Thermographic data were analyzed with a video image processor to determine the diameter of maximum surface temperature and thermal penetration distance of each treatment. Between/within statistical analysis of variance (p

  18. Command and Data Handling Branch Internship

    NASA Technical Reports Server (NTRS)

    Billings, Rachel Mae

    2016-01-01

    Modular Integrated Stackable Layers (MISL) is a computer system designed for simple, fast, and cost effective flexible reconfiguration in space environments such as the ISS and Orion projects for various uses. Existing applications include wireless and wired communications, data acquisition and instrumentation, and camera systems, and potential applications include bus protocol converters and subsystem control. MISL is based on Texas Instruments (TI)' MSP430 16-bit ultra-low-power microcontroller device. The purpose of my project was to integrate the MISL system with a liquid crystal display (LCD) touchscreen. The LCD, manufactured by Crystalfontz and part number CFAF320240F-035T-TS, is a 320 by 240 RGB resistive color screen including an optional carrier board. The vast majority of the project was done with Altium Designer, a tool for printed circuit board (PCB) schematic capture, 3D design, and FPGA (Field Programmable Gate Array) development. The new PCB was to allow the LCD to directly stack to the rest of MISL. Research was done with datasheets for the TI microcontroller and touchscreen display in order to meet desired hardware specifications. Documentation on prior MISL projects was also utilized. The initial step was to create a schematic for the LCD, power bus, and data bus connections between components. A layout was then designed with the required physical dimensions, routed traces and vias, power and ground planes, layer stacks, and other specified design rules such as plane clearance and hole size. Multiple consultation sessions were held with Hester Yim, the technical discipline lead for the Command and Data Handling Branch, and Christy Herring, the lead PCB layout designer in the Electronic Design and Manufacturing Branch in order to ensure proper configuration. At the moment, the PCB is awaiting revision by the latter-mentioned branch. Afterwards, the board will begin to undergo the manufacturing and testing process. Throughout the internship at

  19. PBS Plus Facebook: The Old And New Communication Of Climate Science (Please "Like" And "Share" This Abstract)

    NASA Astrophysics Data System (ADS)

    Alley, R. B.; Haines-Stiles, G.; Akuginow, E.

    2012-12-01

    Traditional and innovative communications strategies were combined in "Earth: The Operators' Manual" (ETOM; writer & director Geoff Haines-Stiles, producer Erna Akuginow, presenter Richard Alley). We attempted both a clear and accessible presentation of some key essentials of current climate science and an experiment in new messaging and new media for outreach and education. ETOM is a 3-part TV series broadcast by PBS ("…one of the more interesting documentary series to come along in years", said the New York Times) and a 320 plus page tradebook, with 110 pages of footnotes referencing peer-reviewed science, published by Norton. But it's also a lively and growing Facebook page with a clear voice sharing positive examples of how renewable energy can reduce polluting emissions here in the US and worldwide, alongside headlines of climate science, and a website—relaunched for the 2012 Earth Day PBS broadcasts—where all three programs can be streamed, and teachers can register to download HD segments for classroom use. The TV programs were designed to offer a highly accessible statement of core climate science, literally explaining how ice cores show us today's climate is changing in ways not seen in the last 800,000 thousand years and why physics and chemistry let us know "It's Us" who are changing CO2 levels in the atmosphere through burning fossil fuels. But the project's outreach components also includes a "Science Pub" in a converted theater in Portland, where the audience consumes food, drink and climate science, and "Adventures of a Climate Scientist in the Age of Politics and Punditry," a dynamic live performance recorded for TV and the web. Messaging includes a Navy Rear Admiral in dress whites explaining why the Pentagon believes climate change is real, and scenes showing Marines and Army implementing solar technologies to enhance mission security and reduce their carbon bootprint. Similarly, outreach events at the North Carolina Museum of Natural

  20. Spectroelectrochemical Sensor for Pertechnetate Applicable to Hanford and Other DOE Sites

    SciTech Connect

    Heineman, William R.

    2004-12-01

    the sensor and not to any film-based process. We have also shown that it is possible to regenerate the film by flushing with 1M KNO3 solution. Response curves were prepared from a single sensor by injecting different concentrations of ferrocyanide, monitoring the uptake, then regenerating the film and injecting the next concentration. To check reproducibility, a film was regenerated 10 times with almost no change in response. Film selectivity was demonstrated by adding a model cationic species, Ru(bipy)32+ to the ferrocyanide sample. Even at 10 times the ferrocyanide concentration, only a very small electrochemical signal and no optical signal due to the cation were observed. Additionally a competitive anion Ru(CN)64- could be distinguished from Fe(CN)64- based on the redox potential and absorbance spectrum differences between the two anions. Both species were preconcentrated into the film, and both could be electrochemically modulated simultaneously or individually. The films exhibited a linear absorbance response to ferrocyanide over the range 0.008-0.2mM. From 0.1mM ferrocyanide solution, the analyte was concentrated in a 320 nm thick film by a factor of {approx}6,000. The films have recently been used at PNNL to repeat cyclic voltammetry experiments with pertechnetate (TcO4) as previously performed with other candidate films. The results showed that the new films performed very well and better than films previously used, and showed reversible waves in the voltammogram with the film present where none appeared when a bare ITO-glass substrate was used. Our results clearly show that cross-linked quaternized poly(4-vinylpyridine) films made this way are superior materials for preconcentrating pertechnetate.

  1. Revolutionary visible and infrared sensor detectors for the most advanced astronomical AO systems

    NASA Astrophysics Data System (ADS)

    Feautrier, Philippe; Gach, Jean-Luc; Guieu, Sylvain; Downing, Mark; Jorden, Paul; Rothman, Johan; de Borniol, Eric D.; Balard, Philippe; Stadler, Eric; Guillaume, Christian; Boutolleau, David; Coussement, Jérome; Kolb, Johann; Hubin, Norbert; Derelle, Sophie; Robert, Clélia; Tanchon, Julien; Trollier, Thierry; Ravex, Alain; Zins, Gérard; Kern, Pierre; Moulin, Thibaut; Rochat, Sylvain; Delpoulbé, Alain; Lebouqun, Jean-Baptiste

    2014-07-01

    We report in this paper decisive advance on the detector development for the astronomical applications that require very fast operation. Since the CCD220 and OCAM2 major success, new detector developments started in Europe either for visible and IR wavelengths. Funded by ESO and the FP7 Opticon European network, the NGSD CMOS device is fully dedicated to Natural and Laser Guide Star AO for the E-ELT with strong ESO involvement. The NGSD will be a 880x840 pixels CMOS detector with a readout noise of 3 e (goal 1e) at 700 Hz frame rate and providing digital outputs. A camera development, based on this CMOS device and also funded by the Opticon European network, is ongoing. Another major AO wavefront sensing detector development concerns IR detectors based on Avalanche Photodiode (e- APD) arrays within the RAPID project. Developed by the SOFRADIR and CEA/LETI manufacturers, the latter offers a 320x255 8 outputs 30 microns IR array, sensitive from 0.4 to 3 microns, with less than 2 e readout noise at 1600 fps. A rectangular window can also be programmed to speed up even more the frame rate when the full frame readout is not required. The high QE response, in the range of 70%, is almost flat over this wavelength range. Advanced packaging with miniature cryostat using pulse tube cryocoolers was developed in the frame of this programme in order to allow use on this detector in any type of environment. The characterization results of this device are presented here. Readout noise as low as 1.7 e at 1600 fps has been measured with a 3 microns wavelength cut-off chip and a multiplication gain of 14 obtained with a limited photodiode polarization of 8V. This device also exhibits excellent linearity, lower than 1%. The pulse tube cooling allows smart and easy cooling down to 55 K. Vibrations investigations using centroiding and FFT measurements were performed proving that the miniature pulse tube does not induce measurable vibrations to the optical bench, allowing use of this

  2. Dynamic volume vs respiratory correlated 4DCT for motion assessment in radiation therapy simulation

    SciTech Connect

    Coolens, Catherine; Bracken, John; Driscoll, Brandon; Hope, Andrew; Jaffray, David

    2012-05-15

    Purpose: Conventional (i.e., respiratory-correlated) 4DCT exploits the repetitive nature of breathing to provide an estimate of motion; however, it has limitations due to binning artifacts and irregular breathing in actual patient breathing patterns. The aim of this work was to evaluate the accuracy and image quality of a dynamic volume, CT approach (4D{sub vol}) using a 320-slice CT scanner to minimize these limitations, wherein entire image volumes are acquired dynamically without couch movement. This will be compared to the conventional respiratory-correlated 4DCT approach (RCCT). Methods: 4D{sub vol} CT was performed and characterized on an in-house, programmable respiratory motion phantom containing multiple geometric and morphological ''tumor'' objects over a range of regular and irregular patient breathing traces obtained from 3D fluoroscopy and compared to RCCT. The accuracy of volumetric capture and breathing displacement were evaluated and compared with the ground truth values and with the results reported using RCCT. A motion model was investigated to validate the number of motion samples needed to obtain accurate motion probability density functions (PDF). The impact of 4D image quality on this accuracy was then investigated. Dose measurements using volumetric and conventional scan techniques were also performed and compared. Results: Both conventional and dynamic volume 4DCT methods were capable of estimating the programmed displacement of sinusoidal motion, but patient breathing is known to not be regular, and obvious differences were seen for realistic, irregular motion. The mean RCCT amplitude error averaged at 4 mm (max. 7.8 mm) whereas the 4D{sub vol} CT error stayed below 0.5 mm. Similarly, the average absolute volume error was lower with 4D{sub vol} CT. Under irregular breathing, the 4D{sub vol} CT method provides a close description of the motion PDF (cross-correlation 0.99) and is able to track each object, whereas the RCCT method results in a

  3. IrLaW an OGC compliant infrared thermography measurement system developed on mini PC with real time computing capabilities for long term monitoring of transport infrastructures

    NASA Astrophysics Data System (ADS)

    Dumoulin, J.; Averty, R.

    2012-04-01

    One of the objectives of ISTIMES project is to evaluate the potentialities offered by the integration of different electromagnetic techniques able to perform non-invasive diagnostics for surveillance and monitoring of transport infrastructures. Among the EM methods investigated, uncooled infrared camera is a promising technique due to its dissemination potential according to its relative low cost on the market. Infrared thermography, when it is used in quantitative mode (not in laboratory conditions) and not in qualitative mode (vision applied to survey), requires to process in real time thermal radiative corrections on raw data acquired to take into account influences of natural environment evolution with time. But, camera sensor has to be enough smart to apply in real time calibration law and radiometric corrections in a varying atmosphere. So, a complete measurement system was studied and developed with low cost infrared cameras available on the market. In the system developed, infrared camera is coupled with other sensors to feed simplified radiative models running, in real time, on GPU available on small PC. The system studied and developed uses a fast Ethernet camera FLIR A320 [1] coupled with a VAISALA WXT520 [2] weather station and a light GPS unit [3] for positioning and dating. It can be used with other Ethernet infrared cameras (i.e. visible ones) but requires to be able to access measured data at raw level. In the present study, it has been made possible thanks to a specific agreement signed with FLIR Company. The prototype system studied and developed is implemented on low cost small computer that integrates a GPU card to allow real time parallel computing [4] of simplified radiometric [5] heat balance using information measured with the weather station. An HMI was developed under Linux using OpenSource and complementary pieces of software developed at IFSTTAR. This new HMI called "IrLaW" has various functionalities that let it compliant to be use in

  4. The active Moresby Seamount Detachment Fault, Woodlark Basin: insights into structure and mechanics from high-resolution submarine mapping and sampling

    NASA Astrophysics Data System (ADS)

    Behrmann, Jan H.; Speckbacher, Romed; Nagel, Thorsten; Klaucke, Ingo; Devey, Colin W.

    2010-05-01

    Moresby Seamount Detachment, located east of Papua New Guinea in the Woodlark Basin, is arguably the best-exposed active extensional detachment fault in the world. It forms the northern slopes of Moresby Seamount, a 3000 meter high east-west trending tectonic horst separating two extensional basins. Fault zone dip is about 30°, and total horizontal stretch accumulated in the past 3.5 Ma is about 8 km. The detachment surface is exposed on the sea floor over an area of about 30 square kilometers. Denudation is almost absent, and sedimentation is apparently suppressed by strong bottom water currents, providing a unique opportunity to analyze the tectonic geomorphology and structure of the fault zone, and sample the fault rocks. R/V SONNE Expedition 203 first mapped the area with about 20 m spatial resolution by ship-based multibeam bathymetry operating at 12 kHz. Most of the detachment surface was subsequently surveyed by AUV fitted with a 200 kHz multibeam echosounder, a CTD and a water column turbidity sensor. Map resolution is about 2 m. Samples were dredged from the detachment, and in basement and sediment sites in the footwall block. In the uppermost part the detachment zone cuts through an approximately 500 m thick sequence of Pliocene clastic sediments. Topography there is rugged, with erosional gullies, and areas of slope failure. Below, an upper smooth zone of the detachment is made up by a slope-parallel belt of cataclasites, generated from metamorphic basement rocks of Paleogene or older age, mainly gabbro, metadiabase and psammo-pelitic schists. Structurally and topographically below the cataclasites is a lower rugged zone mainly exposing cataclasites and mylonites. Topography is due to localized slope failure and a major sinistral strike slip fault scarp transecting the detachment with a 320° azimuth. Below the rugged zone is a lower smooth zone of cataclasites and mylonites. The most spectacular feature here are several north-south trending, extremely

  5. Assessing vulnerability to vegetation growth on earth dikes using geophysical investigation

    NASA Astrophysics Data System (ADS)

    Mary, Benjamin; Saracco, Ginette; Peyras, Laurent; Vennetier, Michel; Mériaux, Patrice

    2015-04-01

    The Mediterranean Basin is prone to a plethora of natural hazards including floods. Vegetation growth in hydraulic earth structures, such as flood protections or channel levees and dams, may induce several degradation mechanisms leading to a risk of failure. Typically, trees' rooting generates two types of risks: internal erosion from root development in earth embankments, and external erosion (slopes and crest) which is often related to trees uprooting. To better assess how woody vegetation can compromise levee integrity, we designed a methodology using acoustical and complex electrical tomography as non destructives methods to spot dangerous roots in the embankment. Our work has been first initiated during laboratory experiments; we performed soundings in controlled conditions to determine both acoustical and electrical intrinsic behavior of our root samples. By comparison with soil samples we expected to point out specific signatures that would be useful for the roots anomaly identification in real conditions. Measurements were repeated on several samples to ensure statistical interpretation. With help of an ultrasonic transmission device, we identified significant relative velocity differences of compressional waves propagation between soil and root samples. We also studied spectral properties using wavelet processing method as an additional parameter of root distinction with the surrounding soil. In the case of electrical soundings, complex resistivity was measured and we computed resistivity spectra. Amplitude of resistivity term showed us that root material behaves as an insulator compared to the soil. With the phase resistivity term information, root can also be seen as an electric power capacitance and reveals maximum polarization effect located around 1Hz. Then, as experimental device for the field measurements, we selected a 320 cm high poplar (Populus) planted in a homogeneous loamy-clayed soil, which is the same soil used in laboratory experiment to

  6. Multi-Sensing system for outdoor thermal monitoring: Application to large scale civil engineering components

    NASA Astrophysics Data System (ADS)

    Crinière, Antoine; Dumoulin, Jean; Manceau, Jean-Luc; Perez, Laetitia; Bourquin, Frederic

    2014-05-01

    Aging of transport infrastructures combined with traffic and climatic solicitations contribute to the reduction of their performances. To address and quantify the resilience of civil engineering structure, investigations on robust, fast and efficient methods are required. Among research works carried out at IFSTTAR, methods for long term monitoring face an increasing demand. Such works take benefits of this last decade technological progresses in ICT domain. The present study follows the ISTIMES European project [1], which aimed at demonstrate the ability of different electromagnetic sensing techniques, processing methods and ICT architecture, to be used for long term monitoring of critical transport infrastructures. Thanks to this project a multi-sensing techniques system, able to date and synchronize measurements carried out by infrared thermography coupled with various measurements data (i.e. weather parameters), have been designed, developed and implemented on real site [2]. Among experiments carried out on real transport infrastructure, it has been shown, for the "Musmesci" bridge deck (Italy), that by using infrared thermal image sequence with weather measurements during sevral days it was possible to develop analysis methods able to produce qualitative and quantitative data [3]. In the present study, added functionalities were designed and added to the "IrLAW" system in order to reach full autonomy in term of power supply, very long term measurement capability (at least 1 year) and automated data base feeding. The surveyed civil engineering structures consist in two concrete beams of 16 m long and 21 T weight each. One of the two beams was damage by high energy mechanical impact at the IFSTTAR falling rocks test station facilities located in the French Alpes [4]. The system is composed of one IR uncooled microbolometric camera (FLIR SC325) with a 320X240 Focal Plane Array detector in band III, a weather station VAISALA WXT520, a GPS, a failover power supply

  7. The Himalaya-Bengal Fan source to sink system - new insights by correlation of re-processed seismic data and IODP Expedition 354 results

    NASA Astrophysics Data System (ADS)

    Bergmann, Fenna; Schwenk, Tilmann; Spiess, Volkard; France-Lanord, Christian

    2016-04-01

    The Bengal Fan, hosted in the northern Indian Ocean, is the largest submarine fan on Earth. Fan evolution started in the Early Eocene as a direct response to the collision of India with the Asian continent in Middle Paleocene times. Subsequently the Himalayan plateau uplift was initiated. Thereby generated interactions with the regional climate caused the evolution of the Indian monsoonal system. Drained by the rivers Ganges and Brahmaputra, ~ 80% of eroded Himalayan sediments are deposited in the Bengal Fan. Hence, the Fan provides the most complete record of the Himalayan history and is well suited to investigate the direct link between the tectonic uplift and the climate evolution of the region. Sediments are transported onto the deep sea fan by turbidity currents building up chan-nel-levee systems. These channel-levee systems are the main architectural elements of the Bengal Fan and are suspected to have their onset in Late Miocene times. Frequent channel avulsion on the upper fan led to the abandonment of old channels and formation of new channel-levee systems or even channel-reoccupation. This complex erosional/depositional system involves lateral depocenter migration, probably on millennial timescales. Conse-quently, investigations of the Himalaya as sediment source begins with a comprehensive understanding of transport, deposition and modification within the Bengal Fan sediment sink. In February/March 2015 the IODP Expedition 354 drilled at 7 sites along a ~320 km long E-W transect at 8° N. Aiming at the recovery of pre-fan deposits and deposits of the Pliocene and Upper Miocene Fan evolution, three deep sites (900 - 1200 mbsf) were realized. These where complemented by four shallow sites (200-300 mbsf) for a detailed study of the depos-its of the last 1-2 million years, including the latest known channel activities (Holocene times). Several channel-levee systems and inter-channel deposits were drilled, active at different times of Fan evolution. To

  8. [Lipid-lowering therapy and patient adherence in the MULTI GAP 2013 trial].

    PubMed

    Simonyi, Gábor

    2014-04-27

    Bevezetés: A dyslipidaemia ismert cardiovascularis kockázati tényező. A lipidterápiában a célértékek elérésének fontos tényezője a megfelelő betegadherencia. Célkitűzés: A MULTI GAP (MULTI Goal Attainment Problem) 2013-as vizsgálatban atheroscleroticus betegségben szenvedő betegek esetében a statinterápia adherenciájának és perzisztenciájának felmérése, amely részben a vizsgálatban részt vevő orvosok becslésén, illetve 319, a megelőző évben elvégzett MULTI GAP vizsgálatban részt vett beteg esetében az Országos Egészségbiztosítási Pénztár vénykiváltási adatbázisán alapult. Módszer: A MULTI GAP 2013 vizsgálatban standard, strukturált kérdőívek segítségével 1519 beteg adatai kerültek feldolgozásra. Az elemzésben kiértékelésre kerültek az egyes ellátási szinteken elért lipidértékek, a kezelőorvos által vélt betegadherencia, a 319 beteg Országos Egészségbiztosítási Pénztár vénykiváltási adataira támaszkodó valós adherencia, a kezelőorvosok elégedettsége a statinterápia eredményeivel, illetve az adherencia és a lipideredmények összevetése. Eredmények: Az elmúlt 7 év felméréseinek adatait is figyelembe véve előtérbe kerültek a hatékonyabb statinok; az atorvastatin és rozuvastatin alkalmazásának összesített aránya 49%-ról 83%-ra, azaz mintegy 70%-kal nőtt. A betegadherencia vonatkozásában kimutatták, hogy a 2,5 mmol/l alatti LDL-koleszterin-értékeket elért betegeknél az 1 év alatt kiváltott receptek száma mintegy nyolc gyógyszertári beváltást jelentett. Ehhez képest a 2,5 mmol/l feletti LDL-koleszterin-értékű csoportban a gyógyszerkiváltás lényegesen alacsonyabb volt (5,3 és 6,3 közötti). Éves szinten a 10–12 és a 7–9 gyógyszerkiváltás szignifikánsan alacsonyabb LDL-koleszterin-szintet jelentett a semennyit (0), illetve az 1–3 receptet éves szinten kiváltók csoportjaihoz képest. A kezelőorvosok által 100%-os

  9. Fullerenes, Organics and the Diffuse Interstellar Bands

    NASA Astrophysics Data System (ADS)

    Foing, Bernard H.

    2016-07-01

    The status of DIB research has strongly advanced since 20 years [1], as well as the quest for fullerenes, PAHs and large organics in space. In 1994 we reported the discovery of two near IR diffuse bands coincident with C60+, confirmed in subsequent years [2-6] and now by latest laboratory experiments. A number of DIB observational studies have been published, dealing with: DIB surveys [1,7-10]; measurements of DIB families, correlations and environment dependences [11-14]; extragalactic DIBs [15, 16]. Resolved substructures were detected [17,18] and compared to predicted rotational contours by large molecules [19]. Polarisation studies provided upper limits constraints [20, 21]. DIBs carriers have been linked with organic molecules observed in the interstellar medium [22-25] such as IR bands (assigned to PAHs), Extended Red Emission or recently detected Anomalous Microwave Emission (AME, assigned to spinning dust) and with spectroscopic IR emission bands measured with ISO or Spitzer. Fullerenes and PAHs have been proposed to explain some DIBs and specific molecules were searched in DIB spectra [eg 2-6, 26-31]. These could be present in various dehydrogenation and ionisation conditions [32,33]. Experiments in the laboratory and in space [eg 34-36] allow to measure the survival and by-products of these molecules. We review DIB observational results and their interpretation, and discuss the presence of large organics, fullerenes, PAHs, graphenes in space. References [1] Herbig, G. 1995 ARA&A33, 19; [2] Foing, B. & Ehrenfreund, P. 1994 Natur 369, 296; [3] Foing, B. & Ehrenfreund, P. 1997 A&A317, L59; [4] Foing, B. & Ehrenfreund, P. 1995 ASSL202, 65; [5] Ehrenfreund, P., Foing, B. H. 1997 AdSpR19, 1033; [6] Galazutdinov, G. A. et al. 2000 MNRAS317, 750; [7] Jenniskens, P., Desert, F.-X. 1994 A&AS106, 39; [8] Ehrenfreund, P. et al. 1997 A&A318, L28; [9] Tuairisg, S. Ó. et al. 2000 A&AS142, 225; [10] Cox, N. et al. 2005 A&A438, 187; [11] Cami, J. et al. 1997A&A.326, 822

  10. Water-level altitudes 2016 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973–2015 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

    USGS Publications Warehouse

    Kasmarek, Mark C.; Ramage, Jason K.; Johnson, Michaela R.

    2016-10-07

    changes in effective stress caused by changes in groundwater withdrawal from the Chicot and Evangeline aquifers.In 2016, water-level-altitude contours for the Chicot aquifer ranged from 200 feet (ft) below the vertical datum (North American Vertical Datum of 1988; hereinafter, datum) in a localized area in northwestern Harris County to 200 ft above datum in west-central Montgomery County. Water-level changes during 2015–16 in the Chicot aquifer ranged from a 39-ft decline to a 26-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Chicot aquifer ranged from a 30-ft decline to a 20-ft rise (2011–16), from a 140-ft decline to a 160-ft rise (1990–2016), and from a 120-ft decline to a 200-ft rise (1977–2016). In 2016, water-level-altitude contours for the Evangeline aquifer ranged from 250 ft below datum in three separate areas in south-central Montgomery County and extending into north-central Harris County, in west-central Harris County, and in southwestern Harris County to 200 ft above datum in southeastern Grimes and northwestern Montgomery Counties. Water-level changes during 2015–16 in the Evangeline aquifer ranged from a 65-ft decline to a 61-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Evangeline aquifer ranged from a 60-ft decline to a 40-ft rise (2011–16), from a 160-ft decline to a 160-ft rise (1990–2016), and from a 320-ft decline to a 240-ft rise (1977–2016). In 2016, water-level-altitude contours for the Jasper aquifer ranged from 200 ft below datum in south-central Montgomery County extending into north-central Harris County to 250 ft above datum in northwestern Montgomery County and extending into eastern Grimes County and southwestern Walker County. Water-level changes during 2015–16 in the Jasper aquifer ranged from a 38-ft decline to a 51-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Jasper aquifer ranged from a 60-ft decline to a 40-ft rise

  11. Water-level altitudes 2010 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2009 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

    USGS Publications Warehouse

    Kasmarek, Mark C.; Johnson, Michaela R.; Ramage, Jason K.

    2010-01-01

    -foot rise (2009-10), from a 25-foot decline to a 35-foot rise (2005-10), from a 40-foot decline to an 80-foot rise (1990-2010), and from a 140-foot decline to a 200-foot rise (1977-2010). In 2010, water-level-altitude contours for the Evangeline aquifer ranged from 300 feet below datum in north-central Harris County to 200 feet above datum at the boundary of Waller, Montgomery, and Grimes Counties. Water-level-altitude changes in the Evangeline aquifer ranged from a 58-foot decline to a 69-foot rise (2009-10), from an 80-foot decline to an 80-foot rise (2005-10), from a 200-foot decline to a 220-foot rise (1990-2010), and from a 320-foot decline to a 220-foot rise (1977-2010). In 2010, water-level-altitude contours for the Jasper aquifer ranged from 200 feet below datum in south-central Montgomery County to 250 feet above datum in eastern-central Grimes County. Water-level-altitude changes in the Jasper aquifer ranged from a 39-foot decline to a 39-foot rise (2009-10), from a 110-foot decline to no change (2005-10), and from a 180-foot decline to no change (2000-10). Compaction of subsurface materials (mostly in the clay layers) composing the Chicot and Evangeline aquifers was recorded continuously at 13 borehole extensometers at 11 sites. For the period of record beginning in 1973, or later, and ending in December 2009, cumulative clay compaction data measured by 12 extensometers ranged from 0.088 foot at the Texas City-Moses Lake site to 3.559 foot at the Addicks site. The rate of compaction varies from site to site because of differences in groundwater withdrawals near each site and differences among sites in the clay-to-sand ratio in the subsurface materials. Therefore, it is not possible to extrapolate or infer a rate of clay compaction for an area based on the rate of compaction measured at a nearby extensometer.

  12. Dryden F-8 Research Aircraft Fleet 1973 in flight, DFBW and SCW

    NASA Technical Reports Server (NTRS)

    1973-01-01

    F-8 Digital Fly-By-Wire (left) and F-8 Supercritical Wing in flight. These two aircraft fundamentally changed the nature of aircraft design. The F-8 DFBW pioneered digital flight controls and led to such computer-controlled airacrft as the F-117A, X-29, and X-31. Airliners such as the Boeing 777 and Airbus A320 also use digital fly-by-wire systems. The other aircraft is a highly modified F-8A fitted with a supercritical wing. Dr. Richard T. Whitcomb of Langley Research Center originated the supercritical wing concept in the late 1960s. (Dr. Whitcomb also developed the concept of the 'area rule' in the early 1950s. It singificantly reduced transonic drag.) The F-8 Digital Fly-By-Wire (DFBW) flight research project validated the principal concepts of all-electric flight control systems now used on nearly all modern high-performance aircraft and on military and civilian transports. The first flight of the 13-year project was on May 25, 1972, with research pilot Gary E. Krier at the controls of a modified F-8C Crusader that served as the testbed for the fly-by-wire technologies. The project was a joint effort between the NASA Flight Research Center, Edwards, California, (now the Dryden Flight Research Center) and Langley Research Center. It included a total of 211 flights. The last flight was December 16, 1985, with Dryden research pilot Ed Schneider at the controls. The F-8 DFBW system was the forerunner of current fly-by-wire systems used in the space shuttles and on today's military and civil aircraft to make them safer, more maneuverable, and more efficient. Electronic fly-by-wire systems replaced older hydraulic control systems, freeing designers to design aircraft with reduced in-flight stability. Fly-by-wire systems are safer because of their redundancies. They are more maneuverable because computers can command more frequent adjustments than a human pilot can. For airliners, computerized control ensures a smoother ride than a human pilot alone can provide

  13. Water-level altitudes 2016 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973–2015 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

    USGS Publications Warehouse

    Kasmarek, Mark C.; Ramage, Jason K.; Johnson, Michaela R.

    2016-10-07

    changes in effective stress caused by changes in groundwater withdrawal from the Chicot and Evangeline aquifers.In 2016, water-level-altitude contours for the Chicot aquifer ranged from 200 feet (ft) below the vertical datum (North American Vertical Datum of 1988; hereinafter, datum) in a localized area in northwestern Harris County to 200 ft above datum in west-central Montgomery County. Water-level changes during 2015–16 in the Chicot aquifer ranged from a 39-ft decline to a 26-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Chicot aquifer ranged from a 30-ft decline to a 20-ft rise (2011–16), from a 140-ft decline to a 160-ft rise (1990–2016), and from a 120-ft decline to a 200-ft rise (1977–2016). In 2016, water-level-altitude contours for the Evangeline aquifer ranged from 250 ft below datum in three separate areas in south-central Montgomery County and extending into north-central Harris County, in west-central Harris County, and in southwestern Harris County to 200 ft above datum in southeastern Grimes and northwestern Montgomery Counties. Water-level changes during 2015–16 in the Evangeline aquifer ranged from a 65-ft decline to a 61-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Evangeline aquifer ranged from a 60-ft decline to a 40-ft rise (2011–16), from a 160-ft decline to a 160-ft rise (1990–2016), and from a 320-ft decline to a 240-ft rise (1977–2016). In 2016, water-level-altitude contours for the Jasper aquifer ranged from 200 ft below datum in south-central Montgomery County extending into north-central Harris County to 250 ft above datum in northwestern Montgomery County and extending into eastern Grimes County and southwestern Walker County. Water-level changes during 2015–16 in the Jasper aquifer ranged from a 38-ft decline to a 51-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Jasper aquifer ranged from a 60-ft decline to a 40-ft rise