Science.gov

Sample records for abaqus user material

  1. Using ABAQUS Scripting Interface for Materials Evaluation and Life Prediction

    NASA Technical Reports Server (NTRS)

    Powers, Lynn M.; Arnold, Steven M.; Baranski, Andrzej

    2006-01-01

    An ABAQUS script has been written to aid in the evaluation of the mechanical behavior of viscoplastic materials. The purposes of the script are to: handle complex load histories; control load/displacement with alternate stopping criteria; predict failure and life; and verify constitutive models. Material models from the ABAQUS library may be used or the UMAT routine may specify mechanical behavior. User subroutines implemented include: UMAT for the constitutive model; UEXTERNALDB for file manipulation; DISP for boundary conditions; and URDFIL for results processing. Examples presented include load, strain and displacement control tests on a single element model. The tests are creep with a life limiting strain criterion, strain control with a stress limiting cycle and a complex interrupted cyclic relaxation test. The techniques implemented in this paper enable complex load conditions to be solved efficiently with ABAQUS.

  2. A Weibull brittle material failure model for the ABAQUS computer program

    SciTech Connect

    Bennett, J.

    1991-08-01

    A statistical failure theory for brittle materials that traces its origins to the Weibull distribution function is developed for use in the general purpose ABAQUS finite element computer program. One of the fundamental assumptions for this development is that Mode 1 microfractures perpendicular to the direction of the principal stress contribute independently to the fast fracture. The theory is implemented by a user subroutine for ABAQUS. Example problems illustrating the capability and accuracy of the model are given. 24 refs., 12 figs.

  3. Calibrating the Abaqus Crushable Foam Material Model using UNM Data

    SciTech Connect

    Schembri, Philip E.; Lewis, Matthew W.

    2014-02-27

    Triaxial test data from the University of New Mexico and uniaxial test data from W-14 is used to calibrate the Abaqus crushable foam material model to represent the syntactic foam comprised of APO-BMI matrix and carbon microballoons used in the W76. The material model is an elasto-plasticity model in which the yield strength depends on pressure. Both the elastic properties and the yield stress are estimated by fitting a line to the elastic region of each test response. The model parameters are fit to the data (in a non-rigorous way) to provide both a conservative and not-conservative material model. The model is verified to perform as intended by comparing the values of pressure and shear stress at yield, as well as the shear and volumetric stress-strain response, to the test data.

  4. 3-D Numerical Simulation and Analysis of Complex Fiber Geometry RaFC Materials with High Volume Fraction and High Aspect Ratio based on ABAQUS PYTHON

    NASA Astrophysics Data System (ADS)

    Jin, BoCheng

    2011-12-01

    Organic and inorganic fiber reinforced composites with innumerable fiber orientation distributions and fiber geometries are abundantly available in several natural and synthetic structures. Inorganic glass fiber composites have been introduced to numerous applications due to their economical fabrication and tailored structural properties. Numerical characterization of such composite material systems is necessitated due to their intrinsic statistical nature, which renders extensive experimentation prohibitively time consuming and costly. To predict various mechanical behavior and characterizations of Uni-Directional Fiber Composites (UDFC) and Random Fiber Composites (RaFC), we numerically developed Representative Volume Elements (RVE) with high accuracy and efficiency and with complex fiber geometric representations encountered in uni-directional and random fiber networks. In this thesis, the numerical simulations of unidirectional RaFC fiber strand RVE models (VF>70%) are first presented by programming in ABAQUS PYTHON. Secondly, when the cross sectional aspect ratios (AR) of the second phase fiber inclusions are not necessarily one, various types of RVE models with different cross sectional shape fibers are simulated and discussed. A modified random sequential absorption algorithm is applied to enhance the volume fraction number (VF) of the RVE, which the mechanical properties represents the composite material. Thirdly, based on a Spatial Segment Shortest Distance (SSSD) algorithm, a 3-Dimentional RaFC material RVE model is simulated in ABAQUS PYTHON with randomly oriented and distributed straight fibers of high fiber aspect ratio (AR=100:1) and volume fraction (VF=31.8%). Fourthly, the piecewise multi-segments fiber geometry is obtained in MATLAB environment by a modified SSSD algorithm. Finally, numerical methods including the polynomial curve fitting and piecewise quadratic and cubic B-spline interpolation are applied to optimize the RaFC fiber geometries

  5. Micromechanics-Based Structural Analysis (FEAMAC) and Multiscale Visualization within Abaqus/CAE Environment

    NASA Technical Reports Server (NTRS)

    Arnold, Steven M.; Bednarcyk, Brett A.; Hussain, Aquila; Katiyar, Vivek

    2010-01-01

    A unified framework is presented that enables coupled multiscale analysis of composite structures and associated graphical pre- and postprocessing within the Abaqus/CAE environment. The recently developed, free, Finite Element Analysis--Micromechanics Analysis Code (FEAMAC) software couples NASA's Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC) with Abaqus/Standard and Abaqus/Explicit to perform micromechanics based FEA such that the nonlinear composite material response at each integration point is modeled at each increment by MAC/GMC. The Graphical User Interfaces (FEAMAC-Pre and FEAMAC-Post), developed through collaboration between SIMULIA Erie and the NASA Glenn Research Center, enable users to employ a new FEAMAC module within Abaqus/CAE that provides access to the composite microscale. FEA IAC-Pre is used to define and store constituent material properties, set-up and store composite repeating unit cells, and assign composite materials as sections with all data being stored within the CAE database. Likewise FEAMAC-Post enables multiscale field quantity visualization (contour plots, X-Y plots), with point and click access to the microscale i.e., fiber and matrix fields).

  6. Automatic Generation of User Material Subroutines for Biomechanical Growth Analysis

    PubMed Central

    Young, Jonathan M.; Yao, Jiang; Ramasubramanian, Ashok; Taber, Larry A.; Perucchio, Renato

    2010-01-01

    Background The analysis of the biomechanics of growth and remodeling in soft tissues requires the formulation of specialized pseudoelastic constitutive relations. The nonlinear finite element analysis (FEA) package Abaqus allows the user to implement such specialized material responses through the coding of a user material subroutine called UMAT. However, hand coding UMAT subroutines is a challenge even for simple pseudoelastic materials and requires substantial time to debug and test the code. Method To resolve this issue, we develop an automatic UMAT code generation procedure for pseudoelastic materials using the symbolic mathematics package Mathematica, and extend the UMAT generator to include continuum growth. The performance of the automatically coded UMAT is tested by simulating the stress–stretch response of a material defined by a Fung-Orthotropic strain energy function, subject to uniaxial stretching, equibiaxial stretching, and simple shear in Abaqus. The Mathematica UMAT generator is then extended to include continuum growth, by adding a growth subroutine to the automatically generated UMAT. Results The Mathematica UMAT generator correctly derives the variables required in the UMAT code, quickly providing a ready-to-use UMAT. In turn, the UMAT accurately simulates the pseudoelastic response. In order to test the growth UMAT we simulate the growth-based bending of a bilayered bar with differing fiber directions in a non-growing passive layer. The anisotropic passive layer, being topologically tied to the growing isotropic layer, causes the bending bar to twist laterally. Conclusions The results of simulations demonstrate the validity of the automatically coded UMAT, used in both standardized tests of hyperelastic materials and for biomechanical growth analysis. PMID:20887023

  7. User-Defined Material Model for Progressive Failure Analysis

    NASA Technical Reports Server (NTRS)

    Knight, Norman F. Jr.; Reeder, James R. (Technical Monitor)

    2006-01-01

    An overview of different types of composite material system architectures and a brief review of progressive failure material modeling methods used for structural analysis including failure initiation and material degradation are presented. Different failure initiation criteria and material degradation models are described that define progressive failure formulations. These progressive failure formulations are implemented in a user-defined material model (or UMAT) for use with the ABAQUS/Standard1 nonlinear finite element analysis tool. The failure initiation criteria include the maximum stress criteria, maximum strain criteria, the Tsai-Wu failure polynomial, and the Hashin criteria. The material degradation model is based on the ply-discounting approach where the local material constitutive coefficients are degraded. Applications and extensions of the progressive failure analysis material model address two-dimensional plate and shell finite elements and three-dimensional solid finite elements. Implementation details and use of the UMAT subroutine are described in the present paper. Parametric studies for composite structures are discussed to illustrate the features of the progressive failure modeling methods that have been implemented.

  8. Modeling ductile dynamic fracture with ABAQUS/explicit

    SciTech Connect

    Anderson, C.A.; Turner, C.

    1996-05-01

    This paper illustrates the use of advanced constitutive models in ABAQUS/Explicit together with highly focused finite element meshes to simulate the propagation of a fracture in a ductile medium. A double edge-cracked specimen under far field dynamic tensile loading is analyzed, and shows both rectilinear motion or unstable oscillatory motion of the crack depending on the material property constraints. Results are also presented for a simulation of ASTM`s standard fracture test E399. Comparisons of ABAQUS/Explicit results with experiments or other analytical/numerical results are made.

  9. Seismic transducer modeling using ABAQUS

    SciTech Connect

    Stephen R. Novascone

    2004-05-01

    A seismic transducer, known as an orbital vibrator, consists of a rotating imbalance driven by an electric motor. When suspended in a liquid-filled wellbore, vibrations of the device are coupled to the surrounding geologic media. In this mode, an orbital vibrator can be used as an efficient rotating dipole source for seismic imaging. Alternately, the motion of an orbital vibrator is affected by the physical properties of the surrounding media. From this point of view, an orbital vibrator can be used as a stand-alone sensor. The reaction to the surroundings can be sensed and recorded by geophones inside the orbital vibrator. These reactions are a function of the media’s physical properties such as modulus, damping, and density, thereby identifying the rock type. This presentation shows how the orbital vibrator and surroundings were modeled with an ABAQUS acoustic FEM. The FEM is found to compare favorably with theoretical predictions. A 2D FEM and analytical model are compared to an experimental data set. Each model compares favorably with the data set.

  10. Comparison between FEBio and Abaqus for biphasic contact problems.

    PubMed

    Meng, Qingen; Jin, Zhongmin; Fisher, John; Wilcox, Ruth

    2013-09-01

    Articular cartilage plays an important role in the function of diarthrodial joints. Computational methods have been used to study the biphasic mechanics of cartilage, and Abaqus has been one of the most widely used commercial software packages for this purpose. A newly developed open-source finite element solver, FEBio, has been developed specifically for biomechanical applications. The aim of this study was to undertake a direct comparison between FEBio and Abaqus for some practical contact problems involving cartilage. Three model types, representing a porous flat-ended indentation test, a spherical-ended indentation test, and a conceptual natural joint contact model, were compared. In addition, a parameter sensitivity study was also performed for the spherical-ended indentation test to investigate the effects of changes in the input material properties on the model outputs, using both FEBio and Abaqus. Excellent agreement was found between FEBio and Abaqus for all of the model types and across the range of material properties that were investigated. PMID:23804955

  11. Comparison between FEBio and Abaqus for biphasic contact problems

    PubMed Central

    Jin, Zhongmin; Fisher, John; Wilcox, Ruth

    2013-01-01

    Articular cartilage plays an important role in the function of diarthrodial joints. Computational methods have been used to study the biphasic mechanics of cartilage, and Abaqus has been one of the most widely used commercial software packages for this purpose. A newly developed open-source finite element solver, FEBio, has been developed specifically for biomechanical applications. The aim of this study was to undertake a direct comparison between FEBio and Abaqus for some practical contact problems involving cartilage. Three model types, representing a porous flat-ended indentation test, a spherical-ended indentation test, and a conceptual natural joint contact model, were compared. In addition, a parameter sensitivity study was also performed for the spherical-ended indentation test to investigate the effects of changes in the input material properties on the model outputs, using both FEBio and Abaqus. Excellent agreement was found between FEBio and Abaqus for all of the model types and across the range of material properties that were investigated. PMID:23804955

  12. Implementation of Bounding Surface Model into ABAQUS and Its Application to Wellbore Stability Analysis

    NASA Astrophysics Data System (ADS)

    Chen, S.; Al-Muntasheri, G.; Abousleiman, Y. N.

    2014-12-01

    The critical state concept based bounding surface model is one of the most widely used elastoplastic constitutive models for geomaterials, attributed mainly to its essential feature of allowing plastic deformation to occur for stress points within the bounding surface and thus the capability to represent the realistic non-recoverable behaviour of soils and rocks observed under the cyclic loading. This paper develops an implicit integration algorithm for the bounding surface model, using the standard return mapping approach (elastic predictor-plastic corrector), to obtain the updated stresses for the given strain increments. The formulation of the constitutive integration requires the derivation of a supplementary differential equation to describe the evolution of a key variable, i.e., the ratio between the image stress and the current stress quantities. It is essentially an extension of the integration scheme presented in an earlier work used for the simple bounding surface version of modified Cam Clay associated with a substantially simplified hardening rule. The integration algorithm for the bounding surface model is implemented into the finite element analysis commercial program, ABAQUS, through the material interface of UMAT (user defined material subroutine), and then used for the analysis of wellbore stability problem. The predictions from the ABAQUS simulations are generally in excellent agreement with the available analytical solutions, thus demonstrating the accuracy and robustness of the proposed integration scheme.

  13. MAC, material accounting database user guide

    SciTech Connect

    Russell, V.K.

    1994-09-22

    The K Basins Material Accounting (MAC) database system user guide describes the user features and functions, and the document is structured like the database menus. This document presents the MAC database system user instructions which explain how to record the movements and configuration of canisters and materials within the K Basins on the computer, the mechanics of handling encapsulation tracking, and administrative functions associated with the system. This document includes the user instructions, which also serve as the software requirements specification for the system implemented on the microcomputer. This includes suggested user keystrokes, examples of screens displayed by the system, and reports generated by the system. It shows how the system is organized, via menus and screens. It does not explain system design nor provide programmer instructions.

  14. Advanced Materials Laboratory User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Orndoff, Evelyne

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the Advanced Materials Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  15. User-Friendly Materials and Alternate Formats.

    ERIC Educational Resources Information Center

    Southwest Educational Development Laboratory, Austin, TX. National Center for the Dissemination of Disability Research.

    This booklet offers guidance for increasing the dissemination and utilization of information (especially federally funded disability research) through development of user-friendly materials and alternate formats. Individual sections address: the distinction between alternate formats and accessibility, suggested policies to help define approaches…

  16. Abaqus Simulations of Rock Response to Dynamic Loading

    SciTech Connect

    Steedman, David W.; Coblentz, David

    2012-08-15

    The LANL Geodynamics Team has been applying Abaqus modeling to achieve increasingly complex simulations. Advancements in Abaqus model building and simulation tools allows this progress. We use Lab-developed constitutive models, the fully coupled CEL Abaqus and general contact to simulate response of realistic sites to explosively driven shock.

  17. Coupled porohyperelastic mass transport (PHEXPT) finite element models for soft tissues using ABAQUS.

    PubMed

    Vande Geest, Jonathan P; Simon, B R; Rigby, Paul H; Newberg, Tyler P

    2011-04-01

    Finite element models (FEMs) including characteristic large deformations in highly nonlinear materials (hyperelasticity and coupled diffusive/convective transport of neutral mobile species) will allow quantitative study of in vivo tissues. Such FEMs will provide basic understanding of normal and pathological tissue responses and lead to optimization of local drug delivery strategies. We present a coupled porohyperelastic mass transport (PHEXPT) finite element approach developed using a commercially available ABAQUS finite element software. The PHEXPT transient simulations are based on sequential solution of the porohyperelastic (PHE) and mass transport (XPT) problems where an Eulerian PHE FEM is coupled to a Lagrangian XPT FEM using a custom-written FORTRAN program. The PHEXPT theoretical background is derived in the context of porous media transport theory and extended to ABAQUS finite element formulations. The essential assumptions needed in order to use ABAQUS are clearly identified in the derivation. Representative benchmark finite element simulations are provided along with analytical solutions (when appropriate). These simulations demonstrate the differences in transient and steady state responses including finite deformations, total stress, fluid pressure, relative fluid, and mobile species flux. A detailed description of important model considerations (e.g., material property functions and jump discontinuities at material interfaces) is also presented in the context of finite deformations. The ABAQUS-based PHEXPT approach enables the use of the available ABAQUS capabilities (interactive FEM mesh generation, finite element libraries, nonlinear material laws, pre- and postprocessing, etc.). PHEXPT FEMs can be used to simulate the transport of a relatively large neutral species (negligible osmotic fluid flux) in highly deformable hydrated soft tissues and tissue-engineered materials. PMID:21428686

  18. Materials and Nondestructive Evaluation Laboratoriers: User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Schaschl, Leslie

    2011-01-01

    The Materials and Nondestructive Evaluation Laboratory process, milestones and inputs are unknowns to first-time users. The Materials and Nondestructive Evaluation Laboratory Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware developers. It is intended to assist their project engineering personnel in materials analysis planning and execution. Material covered includes a roadmap of the analysis process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define scope of analysis, cost, and schedule are included as an appendix to the guide.

  19. Recycled Materials Affirmative Procurement Tracking System (RMAPTS). Software user`s manual

    SciTech Connect

    Not Available

    1994-07-01

    RMAPTS is designed to interact with other computer systems. This system can upload or download data from other RMAPTS systems. RMAPTS also complies with Federal Acquisition Regulations (FARs). Section 6002 of the Resource Conservation of Recovery Act (RCRA), Title 40 Part 247-25 of the Code of Federal Regulations, and Executive Order 12780 present mandates and guidelines to the Department of Energy (DOE) and its contractors for the procurement of products containing recycled materials. These regulations promote cost-effective waste reduction and recovery of reusable materials from Federally generated waste; promote environmentally sound and economically efficient waste reduction and recycling of the nation`s resources; and stimulate private sector markets through preferential procurement of designated items. On August 4, 1992, the Deputy Secretary of the Department of Energy requested DOE to show its commitment to Executive Order 12780, Federal Agency Recycling and Procurement Policy. This software was developed in response to this request. RMAPTS will allow users to track and report specific data concerning the procurement of products that contain recycled material and the quantity of recycled material contained in each product. This system provides greater detail, improved accuracy, and less time spent on year-end reporting. Users can quickly check the year-to-date status of recycled material purchases and recycled material contents of products at any time.

  20. Visualizing MCNP Tally Segment Geometry and Coupling Results with ABAQUS

    SciTech Connect

    J. R. Parry; J. A. Galbraith

    2007-11-01

    The Advanced Graphite Creep test, AGC-1, is planned for irradiation in the Advanced Test Reactor (ATR) in support of the Next Generation Nuclear Plant program. The experiment requires very detailed neutronics and thermal hydraulics analyses to show compliance with programmatic and ATR safety requirements. The MCNP model used for the neutronics analysis required hundreds of tally regions to provide the desired detail. A method for visualizing the hundreds of tally region geometries and the tally region results in 3 dimensions has been created to support the AGC-1 irradiation. Additionally, a method was created which would allow ABAQUS to access the results directly for the thermal analysis of the AGC-1 experiment.

  1. Modeling micro-electronics drill bit behavior with ABAQUS Standard

    SciTech Connect

    Anderson, C.A.; Ricketson, E.

    1997-06-01

    Modeling of drill bit behavior under applied forces as well as modeling of the drilling process itself can aid in the understanding of the relative importance of the various drill bit process parameters and can eventually lead to improved drill bit designs. In this paper the authors illustrate the application of ABAQUS Standard to the stress and deformation analysis of micro-electronics drill bits that are used in manufacturing printed circuit boards. Effects of varying point geometry, web taper and flute length on the stress and deformation in a drill bit are illustrated.

  2. High Temperature Materials Laboratory User Program: 19th Annual Report, October 1, 2005 - September 30, 2006

    SciTech Connect

    Pasto, Arvid

    2007-08-01

    Annual Report contains overview of the High Temperature Materials Laboratory User Program and includes selected highlights of user activities for FY2006. Report is submitted to individuals within sponsoring DOE agency and to other interested individuals.

  3. Phase 2 STS new user development program. Volume 5: Informational materials

    NASA Technical Reports Server (NTRS)

    Mcdowell, J. R.

    1976-01-01

    The informational material which should be provided to the user is described. Recommendations are made as to how the informational material should be derived and maintained, the timeliness or phasing of its use, and the applicability of existing informational material.

  4. Analysis of SMA Hybrid Composite Structures in MSC.Nastran and ABAQUS

    NASA Technical Reports Server (NTRS)

    Turner, Travis L.; Patel, Hemant D.

    2005-01-01

    A thermoelastic constitutive model for shape memory alloy (SMA) actuators and SMA hybrid composite (SMAHC) structures was recently implemented in the commercial finite element codes MSC.Nastran and ABAQUS. The model may be easily implemented in any code that has the capability for analysis of laminated composite structures with temperature dependent material properties. The model is also relatively easy to use and requires input of only fundamental engineering properties. A brief description of the model is presented, followed by discussion of implementation and usage in the commercial codes. Results are presented from static and dynamic analysis of SMAHC beams of two types; a beam clamped at each end and a cantilever beam. Nonlinear static (post-buckling) and random response analyses are demonstrated for the first specimen. Static deflection (shape) control is demonstrated for the cantilever beam. Approaches for modeling SMAHC material systems with embedded SMA in ribbon and small round wire product forms are demonstrated and compared. The results from the commercial codes are compared to those from a research code as validation of the commercial implementations; excellent correlation is achieved in all cases.

  5. Input Files and Procedures for Analysis of SMA Hybrid Composite Beams in MSC.Nastran and ABAQUS

    NASA Technical Reports Server (NTRS)

    Turner, Travis L.; Patel, Hemant D.

    2005-01-01

    A thermoelastic constitutive model for shape memory alloys (SMAs) and SMA hybrid composites (SMAHCs) was recently implemented in the commercial codes MSC.Nastran and ABAQUS. The model is implemented and supported within the core of the commercial codes, so no user subroutines or external calculations are necessary. The model and resulting structural analysis has been previously demonstrated and experimentally verified for thermoelastic, vibration and acoustic, and structural shape control applications. The commercial implementations are described in related documents cited in the references, where various results are also shown that validate the commercial implementations relative to a research code. This paper is a companion to those documents in that it provides additional detail on the actual input files and solution procedures and serves as a repository for ASCII text versions of the input files necessary for duplication of the available results.

  6. Coupled field-structural analysis of HGTR fuel brick using ABAQUS

    SciTech Connect

    Mohanty, S.; Jain, R.; Majumdar, S.; Tautges, T. J.; Srinivasa, M.

    2012-07-01

    High-temperature, gas-cooled reactors (HTGRs) are usually helium-gas cooled, with a graphite core that can operate at reactor outlet temperatures much higher than can conventional light water reactors. In HTGRs, graphite components moderate and reflect neutrons. During reactor operation, high temperature and high irradiation cause damage to the graphite crystal and grains and create other defects. This cumulative structural damage during the reactor lifetime leads to changes in graphite properties, which can alter the ability to support the designed loads. The aim of the present research is to develop a finite-element code using commercially available ABAQUS software for the structural integrity analysis of graphite core components under extreme temperature and irradiation conditions. In addition, the Reactor Geometry Generator tool-kit, developed at Argonne National Laboratory, is used to generate finite-element mesh for complex geometries such as fuel bricks with multiple pin holes and coolant flow channels. This paper presents the proposed concept and discusses results of stress analysis simulations of a fuel block with H-451 grade material properties. (authors)

  7. User-defined Material Model for Thermo-mechanical Progressive Failure Analysis

    NASA Technical Reports Server (NTRS)

    Knight, Norman F., Jr.

    2008-01-01

    Previously a user-defined material model for orthotropic bimodulus materials was developed for linear and nonlinear stress analysis of composite structures using either shell or solid finite elements within a nonlinear finite element analysis tool. Extensions of this user-defined material model to thermo-mechanical progressive failure analysis are described, and the required input data are documented. The extensions include providing for temperature-dependent material properties, archival of the elastic strains, and a thermal strain calculation for materials exhibiting a stress-free temperature.

  8. Developing an Abaqus *HYPERFOAM Model for M9747 (4003047) Cellular Silicone Foam

    SciTech Connect

    Siranosian, Antranik A.; Stevens, R. Robert

    2012-04-26

    This report documents work done to develop an Abaqus *HYPERFOAM hyperelastic model for M9747 (4003047) cellular silicone foam for use in quasi-static analyses at ambient temperature. Experimental data, from acceptance tests for 'Pad A' conducted at the Kansas City Plant (KCP), was used to calibrate the model. The data includes gap (relative displacement) and load measurements from three locations on the pad. Thirteen sets of data, from pads with different serial numbers, were provided. The thirty-nine gap-load curves were extracted from the thirteen supplied Excel spreadsheets and analyzed, and from those thirty-nine one set of data, representing a qualitative mean, was chosen to calibrate the model. The data was converted from gap and load to nominal (engineering) strain and nominal stress in order to implement it in Abaqus. Strain computations required initial pad thickness estimates. An Abaqus model of a right-circular cylinder was used to evaluate and calibrate the *HYPERFOAM model.

  9. 75 FR 27185 - Revisions to the Authorization for Validated End-User Applied Materials China, Ltd.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... FR 33646) by creating a new authorization for ``validated end-users'' located in eligible..., China 201203. Applied Materials South East Asia Pte. Ltd.--Beijing Depot, c/o Beijing Applied Materials Technical Service Center, No. 1 North Di Sheng Street, BDA, Beijing, China 100176. Applied Materials...

  10. The High Temperature Materials Laboratory: A research and user facility at the Oak Ridge National Laboratory

    SciTech Connect

    Not Available

    1992-01-01

    HTML is a modern facility for high-temperature ceramic research; it is also a major user facility, providing industry and university communities access to special research equipment for studying microstructure and microchemistry of materials. User research equipment is divided among six User Centers: Materials Analysis, X-ray Diffraction, Physical Properties, Mechanical Properties, Ceramic Specimen Preparation, and Residual Stress. This brochure provides brief descriptions of each of the major research instruments in the User Centers: scanning Auger microprobe, field emission SEMs, electron microprobe, multitechnique surface analyzer, analytical electron microscope, HRTEM, optical microscopy image analysis, goniometer, scanning calorimetry, simultaneous thermal analysis, thermal properties (expansion, diffusivity, conductivity), high-temperature tensile test facilities, flexure, electromechanical test facilities (flexure, compression creep, environmental), microhardness microprobe, ceramic machining. Hands-on operation by qualified users is encouraged; staff is available. Both proprietary and nonproprietary research may be performed; the former on full cost recovery basis.

  11. The High Temperature Materials Laboratory: A research and user facility at the Oak Ridge National Laboratory

    SciTech Connect

    Not Available

    1992-12-01

    HTML is a modern facility for high-temperature ceramic research; it is also a major user facility, providing industry and university communities access to special research equipment for studying microstructure and microchemistry of materials. User research equipment is divided among six User Centers: Materials Analysis, X-ray Diffraction, Physical Properties, Mechanical Properties, Ceramic Specimen Preparation, and Residual Stress. This brochure provides brief descriptions of each of the major research instruments in the User Centers: scanning Auger microprobe, field emission SEMs, electron microprobe, multitechnique surface analyzer, analytical electron microscope, HRTEM, optical microscopy & image analysis, goniometer, scanning calorimetry, simultaneous thermal analysis, thermal properties (expansion, diffusivity, conductivity), high-temperature tensile test facilities, flexure, electromechanical test facilities (flexure, compression creep, environmental), microhardness microprobe, ceramic machining. Hands-on operation by qualified users is encouraged; staff is available. Both proprietary and nonproprietary research may be performed; the former on full cost recovery basis.

  12. Coupling of STOMP and ABAQUS for Hydro-Geomechanical Modeling of Fluid Flow and Rock Deformation Associated with Subsurface CO2 Injection

    NASA Astrophysics Data System (ADS)

    Carroll, K. C.; Nguyen, B. N.; Fang, Y.; Richmond, M. C.; Murray, C. J.

    2011-12-01

    Geomechanical alteration of porous media is generally ignored for most shallow subsurface applications, whereas CO2 injection, migration, and trapping in deep saline aquifers will be controlled by coupled multifluid flow, energy transfer, geomechanical, and geochemical processes. The accurate assessment of the risks associated with potential leakage of injected CO2 and the design of effective injection systems requires that we represent these coupled processes within numerical simulators. The objective of this study was to examine the coupling of hydraulic and geomechanical processes for simulation of CO2 injection into the subsurface for carbon sequestration. The impact of nonisothermal multifluid flow and porous media deformation mechanics on CO2 migration and storage was evaluated. We present a sequentially coupled approach for multifluid and geomechanical simulation using STOMP and ABAQUS that has been developed and validated through comparison to the solutions for benchmark problems that were solved with a coupled TOUGH-FLAC simulator. The poroelastic model was implemented with user-subroutines in ABAQUS. We also compare the STOMP-ABAQUS simulator to a new version of STOMP that includes the fully coupled poroelastic simulation within the multifluid flow and transport simulator. The poroelastic model computes stiffness, stresses, and strains using aqueous and gas pressures as well as saturations from STOMP output, and provides STOMP with the updated permeability, porosity, and capillary pressure over time during the simulation. The hydraulic only (uncoupled from mechanics) simulation and the hydrogeomechanical (coupled) simulation results using STOMP-ABAQUS were comparable to the previous results of a TOUGH-FLAC simulator. Results from the STOMP-ABAQUS coupled simulator were essentially identical to the fully coupled STOMP hydrogeomechanical simulator when the sequential coupling occurred at small time steps, and deviations between results increased with

  13. Atmospheric Reentry Materials and Structures Evaluation Facility (ARMSEF). User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ARMSEF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  14. 9 CFR 130.19 - User fees for other veterinary diagnostic services or materials provided at NVSL (excluding FADDL).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false User fees for other veterinary... User fees for other veterinary diagnostic services or materials provided at NVSL (excluding FADDL). (a) User fees for other veterinary diagnostic services or materials available from NVSL (excluding...

  15. Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior

    NASA Astrophysics Data System (ADS)

    Williamson, R. L.

    2011-08-01

    A powerful multidimensional fuels performance analysis capability, applicable to both steady and transient fuel behavior, is developed based on enhancements to the commercially available ABAQUS general-purpose thermomechanics code. Enhanced capabilities are described, including: UO 2 temperature and burnup dependent thermal properties, solid and gaseous fission product swelling, fuel densification, fission gas release, cladding thermal and irradiation creep, cladding irradiation growth, gap heat transfer, and gap/plenum gas behavior during irradiation. This new capability is demonstrated using a 2D axisymmetric analysis of the upper section of a simplified multipellet fuel rod, during both steady and transient operation. Comparisons are made between discrete and smeared-pellet simulations. Computational results demonstrate the importance of a multidimensional, multipellet, fully-coupled thermomechanical approach. Interestingly, many of the inherent deficiencies in existing fuel performance codes (e.g., 1D thermomechanics, loose thermomechanical coupling, separate steady and transient analysis, cumbersome pre- and post-processing) are, in fact, ABAQUS strengths.

  16. Toward high-speed 3D nonlinear soft tissue deformation simulations using Abaqus software.

    PubMed

    Idkaidek, Ashraf; Jasiuk, Iwona

    2015-12-01

    We aim to achieve a fast and accurate three-dimensional (3D) simulation of a porcine liver deformation under a surgical tool pressure using the commercial finite element software Abaqus. The liver geometry is obtained using magnetic resonance imaging, and a nonlinear constitutive law is employed to capture large deformations of the tissue. Effects of implicit versus explicit analysis schemes, element type, and mesh density on computation time are studied. We find that Abaqus explicit and implicit solvers are capable of simulating nonlinear soft tissue deformations accurately using first-order tetrahedral elements in a relatively short time by optimizing the element size. This study provides new insights and guidance on accurate and relatively fast nonlinear soft tissue simulations. Such simulations can provide force feedback during robotic surgery and allow visualization of tissue deformations for surgery planning and training of surgical residents. PMID:26530842

  17. Enhancing the ABAQUS Thermomechanics Code to Simulate Steady and Transient Fuel Rod Behavior

    SciTech Connect

    R. L. Williamson; D. A. Knoll

    2009-09-01

    A powerful multidimensional fuels performance capability, applicable to both steady and transient fuel behavior, is developed based on enhancements to the commercially available ABAQUS general-purpose thermomechanics code. Enhanced capabilities are described, including: UO2 temperature and burnup dependent thermal properties, solid and gaseous fission product swelling, fuel densification, fission gas release, cladding thermal and irradiation creep, cladding irradiation growth , gap heat transfer, and gap/plenum gas behavior during irradiation. The various modeling capabilities are demonstrated using a 2D axisymmetric analysis of the upper section of a simplified multi-pellet fuel rod, during both steady and transient operation. Computational results demonstrate the importance of a multidimensional fully-coupled thermomechanics treatment. Interestingly, many of the inherent deficiencies in existing fuel performance codes (e.g., 1D thermomechanics, loose thermo-mechanical coupling, separate steady and transient analysis, cumbersome pre- and post-processing) are, in fact, ABAQUS strengths.

  18. Developing Automated Feedback Materials for a Training Simulator: An Interaction between Users and Researchers.

    ERIC Educational Resources Information Center

    Shlechter, Theodore M.; And Others

    This paper focuses upon the research and development (R&D) process associated with developing automated feedback materials for the SIMulation NETworking (SIMNET) training system. This R&D process involved a partnership among instructional developers, practitioners, and researchers. Users' input has been utilized to help: (1) design the prototype…

  19. Identifying Differences among Novice Database Users: Implications for Training Material Effectiveness.

    ERIC Educational Resources Information Center

    Antonucci, Yvonne Lederer; Wozny, Lucy Anne

    1996-01-01

    Identifies and describes sublevels of novices using a database management package, clustering those whose interaction is effective, partially effective, and totally ineffective. Among assistance documentation, functional tree diagrams (FTDs) were more beneficial to partially effective users than traditional reference material. The results have…

  20. A multi-user real time inventorying system for radioactive materials: a networking approach.

    PubMed

    Mehta, S; Bandyopadhyay, D; Hoory, S

    1998-01-01

    A computerized system for radioisotope management and real time inventory coordinated across a large organization is reported. It handles hundreds of individual users and their separate inventory records. Use of highly efficient computer network and database technologies makes it possible to accept, maintain, and furnish all records related to receipt, usage, and disposal of the radioactive materials for the users separately and collectively. The system's central processor is an HP-9000/800 G60 RISC server and users from across the organization use their personal computers to login to this server using the TCP/IP networking protocol, which makes distributed use of the system possible. Radioisotope decay is automatically calculated by the program, so that it can make the up-to-date radioisotope inventory data of an entire institution available immediately. The system is specifically designed to allow use by large numbers of users (about 300) and accommodates high volumes of data input and retrieval without compromising simplicity and accuracy. Overall, it is an example of a true multi-user, on-line, relational database information system that makes the functioning of a radiation safety department efficient. PMID:9415583

  1. Waste minimization for commercial radioactive materials users generating low-level radioactive waste. Revision 1

    SciTech Connect

    Fischer, D.K.; Gitt, M.; Williams, G.A.; Branch, S.; Otis, M.D.; McKenzie-Carter, M.A.; Schurman, D.L.

    1991-07-01

    The objective of this document is to provide a resource for all states and compact regions interested in promoting the minimization of low-level radioactive waste (LLW). This project was initiated by the Commonwealth of Massachusetts, and Massachusetts waste streams have been used as examples; however, the methods of analysis presented here are applicable to similar waste streams generated elsewhere. This document is a guide for states/compact regions to use in developing a system to evaluate and prioritize various waste minimization techniques in order to encourage individual radioactive materials users (LLW generators) to consider these techniques in their own independent evaluations. This review discusses the application of specific waste minimization techniques to waste streams characteristic of three categories of radioactive materials users: (1) industrial operations using radioactive materials in the manufacture of commercial products, (2) health care institutions, including hospitals and clinics, and (3) educational and research institutions. Massachusetts waste stream characterization data from key radioactive materials users in each category are used to illustrate the applicability of various minimization techniques. The utility group is not included because extensive information specific to this category of LLW generators is available in the literature.

  2. Waste minimization for commercial radioactive materials users generating low-level radioactive waste

    SciTech Connect

    Fischer, D.K.; Gitt, M.; Williams, G.A.; Branch, S. ); Otis, M.D.; McKenzie-Carter, M.A.; Schurman, D.L. )

    1991-07-01

    The objective of this document is to provide a resource for all states and compact regions interested in promoting the minimization of low-level radioactive waste (LLW). This project was initiated by the Commonwealth of Massachusetts, and Massachusetts waste streams have been used as examples; however, the methods of analysis presented here are applicable to similar waste streams generated elsewhere. This document is a guide for states/compact regions to use in developing a system to evaluate and prioritize various waste minimization techniques in order to encourage individual radioactive materials users (LLW generators) to consider these techniques in their own independent evaluations. This review discusses the application of specific waste minimization techniques to waste streams characteristic of three categories of radioactive materials users: (1) industrial operations using radioactive materials in the manufacture of commercial products, (2) health care institutions, including hospitals and clinics, and (3) educational and research institutions. Massachusetts waste stream characterization data from key radioactive materials users in each category are used to illustrate the applicability of various minimization techniques. The utility group is not included because extensive information specific to this category of LLW generators is available in the literature.

  3. Software Management Environment (SME) release 9.4 user reference material

    NASA Technical Reports Server (NTRS)

    Hendrick, R.; Kistler, D.; Manter, K.

    1992-01-01

    This document contains user reference material for the Software Management Environment (SME) prototype, developed for the Systems Development Branch (Code 552) of the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC). The SME provides an integrated set of management tools that can be used by software development managers in their day-to-day management and planning activities. This document provides an overview of the SME, a description of all functions, and detailed instructions concerning the software's installation and use.

  4. Numerical Simulation of Linear Friction Welding Based on ABAQUS Environment: Challenges and Perspectives

    NASA Astrophysics Data System (ADS)

    Li, Wenya; Wang, Feifan; Shi, Shanxiang; Ma, Tiejun

    2013-11-01

    In order to investigate the complicated thermomechanically coupled process of linear friction welding (LFW), three different numerical methods were developed using the ABAQUS software. LFW steel and Ti-6Al-4V were calculated by using a 2D model with the explicit and implicit methods, respectively, and the calculated results were validated by experiments. In addition, a 3D model for LFW Ti-5Al-2Sn-2Zr-4Mo-4Cr was firstly acquired by using the newly developed explicit-implicit alternate method and the calculated flash seemed more like the real one. Furthermore, a few open questions and perspectives in LFW modeling are discussed and concluded.

  5. Beyond income: Material resources among drug users in economically-disadvantaged New York City neighborhoods

    PubMed Central

    Ompad, Danielle C.; Nandi, Vijay; Cerdá, Magdalena; Crawford, Natalie; Galea, Sandro; Vlahov, David

    2011-01-01

    Background Little is known about material resources among drug users beyond income. Income measures can be insensitive to variation among the poor, do not account for variation in cost-of-living, and are subject to non-response bias and underreporting. Further, most do not include illegal income sources that may be relevant to drug-using populations. Methods We explored the reliability and validity of an 18-item material resource scale and describe correlates of adequate resources among 1593 current, former and non-drug users recruited in New York City. Reliability was determined using coefficient α, ωh, and factor analysis. Criterion validity was explored by comparing item and mean scores by income and income source using ANOVA; content validity analyses compared scores by drug use. Multiple linear regression was used to describe correlates of adequate resources. Results The coefficient α and ωh for the overall scale were 0.91 and 0.68, respectively, suggesting reliability was at least adequate. Legal income >$5000 (vs. ≤ $5000) and formal (vs. informal) income sources were associated with more resources, supporting criterion validity. We observed decreasing resources with increasing drug use severity, supporting construct validity. Three factors were identified: basic needs, economic resources and services. Many did not have their basic needs met and few had adequate economic resources. Correlates of adequate material resources included race/ethnicity, income, income source, and homelessness. Conclusions The 18-item material resource scale demonstrated reliability and validity among drug users. These data provide a different view of poverty, one that details specific challenges faced by low-income communities. PMID:21835561

  6. 43 CFR 3602.12 - How does the mineral materials sales process affect other users of the same public lands?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... process affect other users of the same public lands? 3602.12 Section 3602.12 Public Lands: Interior... does the mineral materials sales process affect other users of the same public lands? (a) When BLM..., entry, or other conflicting use of the land, including subsequent mining claim locations. (b)...

  7. 43 CFR 3602.12 - How does the mineral materials sales process affect other users of the same public lands?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... process affect other users of the same public lands? 3602.12 Section 3602.12 Public Lands: Interior... does the mineral materials sales process affect other users of the same public lands? (a) When BLM..., entry, or other conflicting use of the land, including subsequent mining claim locations. (b)...

  8. 43 CFR 3602.12 - How does the mineral materials sales process affect other users of the same public lands?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... process affect other users of the same public lands? 3602.12 Section 3602.12 Public Lands: Interior... does the mineral materials sales process affect other users of the same public lands? (a) When BLM..., entry, or other conflicting use of the land, including subsequent mining claim locations. (b)...

  9. Innovative materials and equipment for pavement surface repairs. Volume 3: Data base users guide

    NASA Astrophysics Data System (ADS)

    James, G. S.

    1991-02-01

    Volume 3 of this three-volume set is a user's manual that describes the use and manipulation of the Relational Database Manager (ORACLE) which was used in this project. The data base contains product information and performance histories of many patching and sealing materials, as well as performance information on various types of equipment for patching and sealing. The report also contains supplemental information on the development of the data base, as well as a copy of the questionnaire that was used in this research effort.

  10. Effect of Wheelchair Frame Material on Users' Mechanical Work and Transmitted Vibration

    PubMed Central

    Aissaoui, Rachid

    2014-01-01

    Wheelchair propulsion exposes the user to a high risk of shoulder injury and to whole-body vibration that exceeds recommendations of ISO 2631-1:1997. Reducing the mechanical work required to travel a given distance (WN-WPM, weight-normalized work-per-meter) can help reduce the risk of shoulder injury, while reducing the vibration transmissibility (VT) of the wheelchair frame can reduce whole-body vibration. New materials such as titanium and carbon are used in today's wheelchairs and are advertised to improve both parameters, but current knowledge on this matter is limited. In this study, WN-WPM and VT were measured simultaneously and compared between six folding wheelchairs (1 titanium, 1 carbon, and 4 aluminium). Ten able-bodied users propelled the six wheelchairs on three ground surfaces. Although no significant difference of WN-WPM was found between wheelchairs (P < 0.1), significant differences of VT were found (P < 0.05). The carbon wheelchair had the lowest VT. Contrarily to current belief, the titanium wheelchair VT was similar to aluminium wheelchairs. A negative correlation between VT and WN-WPM was found, which means that reducing VT may be at the expense of increasing WN-WPM. Based on our results, use of carbon in wheelchair construction seems promising to reduce VT without increasing WN-WPM. PMID:25276802

  11. Advanced Test Reactor National Scientific User Facility: Addressing advanced nuclear materials research

    SciTech Connect

    John Jackson; Todd Allen; Frances Marshall; Jim Cole

    2013-03-01

    The Advanced Test Reactor National Scientific User Facility (ATR NSUF), based at the Idaho National Laboratory in the United States, is supporting Department of Energy and industry research efforts to ensure the properties of materials in light water reactors are well understood. The ATR NSUF is providing this support through three main efforts: establishing unique infrastructure necessary to conduct research on highly radioactive materials, conducting research in conjunction with industry partners on life extension relevant topics, and providing training courses to encourage more U.S. researchers to understand and address LWR materials issues. In 2010 and 2011, several advanced instruments with capability focused on resolving nuclear material performance issues through analysis on the micro (10-6 m) to atomic (10-10 m) scales were installed primarily at the Center for Advanced Energy Studies (CAES) in Idaho Falls, Idaho. These instruments included a local electrode atom probe (LEAP), a field-emission gun scanning transmission electron microscope (FEG-STEM), a focused ion beam (FIB) system, a Raman spectrometer, and an nanoindentor/atomic force microscope. Ongoing capability enhancements intended to support industry efforts include completion of two shielded, irradiation assisted stress corrosion cracking (IASCC) test loops, the first of which will come online in early calendar year 2013, a pressurized and controlled chemistry water loop for the ATR center flux trap, and a dedicated facility intended to house post irradiation examination equipment. In addition to capability enhancements at the main site in Idaho, the ATR NSUF also welcomed two new partner facilities in 2011 and two new partner facilities in 2012; the Oak Ridge National Laboratory, High Flux Isotope Reactor (HFIR) and associated hot cells and the University California Berkeley capabilities in irradiated materials analysis were added in 2011. In 2012, Purdue University’s Interaction of Materials

  12. 43 CFR 3602.12 - How does the mineral materials sales process affect other users of the same public lands?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false How does the mineral materials sales process affect other users of the same public lands? 3602.12 Section 3602.12 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL...

  13. Microcomputer Page Layout (MicroPLA) Routine for Text-Graphic Materials: User's Guide. Technical Report 162.

    ERIC Educational Resources Information Center

    Galyon, Rosalind; And Others

    Based on an earlier user's guide to a minicomputer page layout system called PLA (Terrell, 1982), this guide is designed for use in the development and production of text-graphic materials for training relatively unskilled technicians to perform complex procedures. A microcomputer version of PLA, MicroPLA uses the Commodore 8032 microcomputer to…

  14. The Education of Staff and Users for the Proper Handling and Care of Archival Materials: A RAMP Study with Guidelines.

    ERIC Educational Resources Information Center

    Ford, Helen

    The United Nations Educational, Scientific and Cultural Organization (UNESCO) Records and Archives Management Programme (RAMP) works primarily to help developing countries meet archive and record management needs. This study is intended to inform archivists, curators, and users in the proper handling and care of archival materials. The publication…

  15. A Technical, User and Cost Comparison Study of Microfiche Duplicate Film Material. Final Report.

    ERIC Educational Resources Information Center

    Prevel, James J.

    A technical, user and cost comparison study was undertaken to provide the Educational Resources Information Clearinghouse (ERIC) staff with data on silver halide, diazo, and vesicular type films for microfiche duplication. This information will allow ERIC to determine if diazo and/or vesicular films should be considered in producing ERIC duplicate…

  16. 77 FR 10953 - Amendment to Existing Validated End-User Authorizations for Applied Materials (China), Inc...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ..., Hubei Province, China 430223. Semiconductor Items controlled Semiconductor 72 FR 59164, 10/19... June 19, 2007 (72 FR 33646), creating a new authorization for ``validated end-users'' (VEUs) located in... (72 FR 59164). Subsequently, AMAT's VEU authorization listing has been amended to add...

  17. User's manual for GAMNAS: Geometric and Material Nonlinear Analysis of Structures

    NASA Technical Reports Server (NTRS)

    Whitcomb, J. D.; Dattaguru, B.

    1984-01-01

    GAMNAS (Geometric and Material Nonlinear Analysis of Structures) is a two dimensional finite-element stress analysis program. Options include linear, geometric nonlinear, material nonlinear, and combined geometric and material nonlinear analysis. The theory, organization, and use of GAMNAS are described. Required input data and results for several sample problems are included.

  18. Application of python-based Abaqus preprocess and postprocess technique in analysis of gearbox vibration and noise reduction

    NASA Astrophysics Data System (ADS)

    Yi, Guilian; Sui, Yunkang; Du, Jiazheng

    2011-06-01

    To reduce vibration and noise, a damping layer and constraint layer are usually pasted on the inner surface of a gearbox thin shell, and their thicknesses are the main parameters in the vibration and noise reduction design. The normal acceleration of the point on the gearbox surface is the main index that can reflect the vibration and noise of that point, and the normal accelerations of different points can reflect the degree of the vibration and noise of the whole structure. The K-S function is adopted to process many points' normal accelerations as the comprehensive index of the vibration characteristics of the whole structure, and the vibration acceleration level is adopted to measure the degree of the vibration and noise. Secondary development of the Abaqus preprocess and postprocess on the basis of the Python scripting programming automatically modifies the model parameters, submits the job, and restarts the analysis totally, which avoids the tedious work of returning to the Abaqus/CAE for modifying and resubmitting and improves the speed of the preprocess and postprocess and the computational efficiency.

  19. Materials Presented at the MU-SPIN Tenth Annual Users' Conference

    NASA Technical Reports Server (NTRS)

    Harrington, James L., Jr.; Shukla, Pooja

    2000-01-01

    The Minority University-Space Interdisciplinary Network (MU-SPIN) Program and NASA's Minority University Research and Education Division (MURED) both reached their 10th anniversaries. In honor of this occasion, the 2000 Annual Users' Conference held at Morris Brown College in Atlanta, Georgia, September 11-15, 2000, was the first to be jointly hosted by MU-SPIN and MURED. With the theme 'Celebrating Our Tenth Year With Our Eyes on the Prize,' the conference provided a national forum for showcasing successful MU-SPIN and MURED Program (MUREP) experiences to enhance faculty/student development in areas of scientific and technical research and education.

  20. Materials Presented at the MU-SPIN Ninth Annual Users' Conference

    NASA Technical Reports Server (NTRS)

    Harrington, James, Jr.; Brown, Robin L.

    2000-01-01

    MU-SPIN's Ninth Annual Users' Conference was held from September 21-25, 1999, and hosted by Florida International University, a predominantly Hispanic-serving institution located in Miami, Florida. Its theme was A New MU-SPIN for the New Millennium. The MU-SPIN conference focused on showcasing successful experiences with information technology to enhance faculty and student development in areas of scientific and technical research and education. And, it provided a forum for discussing increased participation of MU-SPIN schools in NASA Flight Missions and NASA Educational and Public Outreach activities.

  1. Advanced composites structural concepts and materials technologies for primary aircraft structures. Structural response and failure analysis: ISPAN modules users manual

    NASA Technical Reports Server (NTRS)

    Hairr, John W.; Huang, Jui-Ten; Ingram, J. Edward; Shah, Bharat M.

    1992-01-01

    The ISPAN Program (Interactive Stiffened Panel Analysis) is an interactive design tool that is intended to provide a means of performing simple and self contained preliminary analysis of aircraft primary structures made of composite materials. The program combines a series of modules with the finite element code DIAL as its backbone. Four ISPAN Modules were developed and are documented. These include: (1) flat stiffened panel; (2) curved stiffened panel; (3) flat tubular panel; and (4) curved geodesic panel. Users are instructed to input geometric and material properties, load information and types of analysis (linear, bifurcation buckling, or post-buckling) interactively. The program utilizing this information will generate finite element mesh and perform analysis. The output in the form of summary tables of stress or margins of safety, contour plots of loads or stress, and deflected shape plots may be generalized and used to evaluate specific design.

  2. Long Fibre Composite Modelling Using Cohesive User's Element

    NASA Astrophysics Data System (ADS)

    Kozák, Vladislav; Chlup, Zdeněk

    2010-09-01

    The development glass matrix composites reinforced by unidirectional long ceramic fibre has resulted in a family of very perspective structural materials. The only disadvantage of such materials is relatively high brittleness at room temperature. The main micromechanisms acting as toughening mechanism are the pull out, crack bridging, matrix cracking. There are other mechanisms as crack deflection etc. but the primer mechanism is mentioned pull out which is governed by interface between fibre and matrix. The contribution shows a way how to predict and/or optimise mechanical behaviour of composite by application of cohesive zone method and write user's cohesive element into the FEM numerical package Abaqus. The presented results from numerical calculations are compared with experimental data. Crack extension is simulated by means of element extinction algorithms. The principal effort is concentrated on the application of the cohesive zone model with the special traction separation (bridging) law and on the cohesive zone modelling. Determination of micro-mechanical parameters is based on the combination of static tests, microscopic observations and numerical calibration procedures.

  3. Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

    NASA Astrophysics Data System (ADS)

    Liu, P. F.; Yang, Y. H.; Gu, Z. P.; Zheng, J. Y.

    2015-12-01

    Interaction mechanism between the intralaminar damage and interlaminar delamination of composite laminates is always a challenging issue. It is important to consider the progressive failure and strain softening behaviors simultaneously during the damage modeling and numerical simulation of composites using FEA. This paper performs three-dimensional finite element analysis of the progressive failure and strain localization of composites using FEA. An intralaminar progressive failure model based on the strain components is proposed and the nonlinear cohesive model is used to predict the delamination growth. In particular, the nonlocal integral theory which introduces a length scale into the governing equations is used to regularize the strain localization problems of composite structures. Special finite element codes are developed using ABAQUS to predict the intralaminar and interlaminar damage evolution of composites simultaneously. The carbon fiber/epoxy composite laminates with a central hole demonstrates the developed theoretical models and numerical algorithm by discussing the effects of the mesh sizes and layups patterns. It is shown the strain localization problem can be well solved in the progressive failure analysis of composites when the energy dissipation due to the damage of the fiber, matrix and interface occurs at a relatively wide area.

  4. Apparent behaviour of charged and neutral materials with ellipsoidal fibre distributions and cross-validation of finite element implementations.

    PubMed

    Nagel, Thomas; Kelly, Daniel J

    2012-05-01

    Continuous fibre distribution models can be applied to a variety of biological tissues with both charged and neutral extracellular matrices. In particular, ellipsoidal models have been used to describe the complex material behaviour of tissues such as articular cartilage and their engineered tissue equivalents. The choice of material parameters is more difficult than in classical anisotropic models and the impact that changes to these parameters can have on the predictions of such models are poorly understood. The objective of this study is to demonstrate the apparent behaviour of this class of materials over a range of material parameters. We further introduce a scaling approach to overcome certain counter-intuitive aspects related to the choice of anisotropy parameters and outline the integration method used in our implementations. User material codes for the commercial FE software packages Abaqus and MSC Marc are provided for use by other investigators. Cross-validation of our code against similar implementations in FEBio is also presented. PMID:22498290

  5. Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Opportunitistic Enzymes, Catalytic Promiscuity and the Evolution of chemodiversity in Nature (2010 JGI User Meeting)

    ScienceCinema

    Noel, Joseph

    2011-04-25

    Joseph Noel from the Salk Institute on "Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Enzymes, Catalytic Promiscuity and the Evolution of Chemodiversity in Nature" on March 26, 2010 at the 5th Annual DOE JGI User Meeting

  6. Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Opportunitistic Enzymes, Catalytic Promiscuity and the Evolution of chemodiversity in Nature (2010 JGI User Meeting)

    SciTech Connect

    Noel, Joseph

    2010-03-26

    Joseph Noel from the Salk Institute on "Metabolic Noise, Vestigial Metabolites or the Raw Material of Ecological Adaptation? Enzymes, Catalytic Promiscuity and the Evolution of Chemodiversity in Nature" on March 26, 2010 at the 5th Annual DOE JGI User Meeting

  7. Micromechanics and constitutive models for soft active materials with phase evolution

    NASA Astrophysics Data System (ADS)

    Wang, Binglian

    Soft active materials, such as shape memory polymers, liquid crystal elastomers, soft tissues, gels etc., are materials that can deform largely in response to external stimuli. Micromechanics analysis of heterogeneous materials based on finite element method is a typically numerical way to study the thermal-mechanical behaviors of soft active materials with phase evolution. While the constitutive models that can precisely describe the stress and strain fields of materials in the process of phase evolution can not be found in the databases of some commercial finite element analysis (FEA) tools such as ANSYS or Abaqus, even the specific constitutive behavior for each individual phase either the new formed one or the original one has already been well-known. So developing a computationally efficient and general three dimensional (3D) thermal-mechanical constitutive model for soft active materials with phase evolution which can be implemented into FEA is eagerly demanded. This paper first solved this problem theoretically by recording the deformation history of each individual phase in the phase evolution process, and adopted the idea of effectiveness by regarding all the new formed phase as an effective phase with an effective deformation to make this theory computationally efficient. A user material subroutine (UMAT) code based on this theoretical constitutive model has been finished in this work which can be added into the material database in Abaqus or ANSYS and can be easily used for most soft active materials with phase evolution. Model validation also has been done through comparison between micromechanical FEA and experiments on a particular composite material, shape memory elastomeric composite (SMEC) which consisted of an elastomeric matrix and the crystallizable fibre. Results show that the micromechanics and the constitutive models developed in this paper for soft active materials with phase evolution are completely relied on.

  8. A Generalized Anisotropic Hardening Rule Based on the Mroz Multi-Yield-Surface Model for Pressure Insensitive and Sensitive Materials

    SciTech Connect

    Choi, Kyoo Sil; Pan, Jwo

    2009-07-27

    In this paper, a generalized anisotropic hardening rule based on the Mroz multi-yield-surface model is derived. The evolution equation for the active yield surface is obtained by considering the continuous expansion of the active yield surface during the unloading/reloading process. The incremental constitutive relation based on the associated flow rule is then derived for a general yield function. As a special case, detailed incremental constitutive relations are derived for the Mises yield function. The closed-form solutions for one-dimensional stress-plastic strain curves are also derived and plotted for the Mises materials under cyclic loading conditions. The stress-plastic strain curves show closed hysteresis loops under uniaxial cyclic loading conditions and the Masing hypothesis is applicable. A user material subroutine based on the Mises yield function, the anisotropic hardening rule and the constitutive relations was then written and implemented into ABAQUS. Computations were conducted for a simple plane strain finite element model under uniaxial monotonic and cyclic loading conditions based on the anisotropic hardening rule and the isotropic and nonlinear kinematic hardening rules of ABAQUS. The results indicate that the plastic response of the material follows the intended input stress-strain data for the anisotropic hardening rule whereas the plastic response depends upon the input strain ranges of the stress-strain data for the nonlinear kinematic hardening rule.

  9. Constitutive equations for orthotropic nonlinear viscoelastic behaviour using a generalized Maxwell model Application to wood material

    NASA Astrophysics Data System (ADS)

    Vidal-Sallé, Emmanuelle; Chassagne, Pierre

    2007-06-01

    This paper presents a nonlinear viscoelastic orthotropic constitutive equation applied to wood material. The proposed model takes into account mechanical and mechanosorptive creep via a 3D stress ratio and moisture change rate for a cylindrical orthotropic material. Orthotropic frame is based on the grain direction (L), radial (R) and hoop (T) directions, which are natural wood directions. Particular attention is taken to ensure the model to fulfill the necessary dissipation conditions. It is based on a rheological generalized Maxwell model with two elements in parallel in addition with a single linear spring taking into account the long term response. The proposed model is implemented in the finite element code ABAQUS/Standard® via a user subroutine UMAT and simple example is shown to demonstrate the capability of the proposed model. Future works would deal with damage and fracture prediction for wooden structures submitted to climate variations and mechanical loading.

  10. A SMALL-SCALE DAMAGE APPROACH TO PREDICT FATIGUE CRACK GROWTH IN CERAMIC MATERIALS

    SciTech Connect

    Nguyen, Ba Nghiep; Koeppel, Brian J.; Khaleel, Mohammad A.

    2006-05-19

    This paper proposes a small-scale damage modeling approach to predict fatigue crack growth in ceramic materials. A fatigue damage model is formulated that uses two variables. One variable is the scalar damage variable governing the reduction of stiffness, and the other is the number of cycles. The damage evolution law is obtained based on thermodynamics of continuous media and a damage criterion containing a damage threshold function that depends on the damage variable and the cyclic loading parameters. The model has been implemented into the ABAQUS finite element code via user-subroutines and has been used in a modified boundary layer (MBL) modeling approach to analyze fatigue crack growth in a small fracture process zone situated at an initial crack tip. The model application is illustrated through an analysis of fatigue crack growth in an yttria-stabilized tetragonal zirconia material.

  11. Nondestructive analysis of advanced materials nonlinear behavior using digital projection moiré

    NASA Astrophysics Data System (ADS)

    Pourvais, Y.; Asgari, P.; Moradi, A. R.; Rahmani, O.

    2014-06-01

    In this paper we use digital projection moiré (DPM) method to analyze the non-linear behavior of sandwich beams with compliant foam core. These cores are highly flexible with respect to the face sheets and their behavior is associated with localized effects in the form of localized displacements and stresses, which in turn influence the overall behavior of sandwich beams. In this study we compare the results of three point bending with Finite Element Analysis (FEA) results that are obtained from the ABAQUS finite element code. We have shown that DPM experimental results are in good agreement with FEA simulations. It is suggested that the presented method can be used as a simple, advantageous and user friendly whole-field testing technique for many applications in evaluation of composite materials and sandwich structures.

  12. NASTRAN: Users' experiences

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The proceedings of a conference on NASA Structural Analysis (NASTRAN) to analyze the experiences of users of the program are presented. The subjects discussed include the following: (1) statics and buckling, (2) vibrations and dynamics, (3) substructing, (4) new capability, (5) user's experience, and (6) system experience. Specific applications of NASTRAN to spacecraft, aircraft, nuclear power plants, and materials tests are reported.

  13. TORAC User's Manual. A computer code for analyzing tornado-induced flow and material transport in nuclear facilities

    SciTech Connect

    Andrae, R.W.; Tang, P.K.; Martin, R.A.; Gregory, W.S.

    1985-05-01

    This manual describes the TORAC computer code, which can model tornado-induced flows, pressures, and material transport within structures. Future versions of this code will have improved analysis capabilities. In addition, it is part of a family of computer codes that is designed to provide improved methods of safety analysis for the nuclear industry. TORAC is directed toward the analysis of facility ventilation systems, including interconnected rooms and corridors. TORAC is an improved version of the TVENT computer code. In TORAC, blowers can be turned on and off and dampers can be controlled with an arbitrary time function. The material transport capability is very basic and includes convection, depletion, entrainment, and filtration of material. The input specifications for the code and a variety of sample problems are provided. 53 refs., 62 figs.

  14. 40 CFR 266.23 - Standards applicable to users of materials that are used in a manner that constitutes disposal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... materials under the provisions of § 266.20(b) of this chapter.) (b) The use of waste or used oil or other... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES...

  15. 40 CFR 266.23 - Standards applicable to users of materials that are used in a manner that constitutes disposal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... materials under the provisions of § 266.20(b) of this chapter.) (b) The use of waste or used oil or other... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES...

  16. 40 CFR 266.23 - Standards applicable to users of materials that are used in a manner that constitutes disposal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... materials under the provisions of § 266.20(b) of this chapter.) (b) The use of waste or used oil or other... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES...

  17. 40 CFR 266.23 - Standards applicable to users of materials that are used in a manner that constitutes disposal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... materials under the provisions of § 266.20(b) of this chapter.) (b) The use of waste or used oil or other... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES...

  18. 40 CFR 266.23 - Standards applicable to users of materials that are used in a manner that constitutes disposal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... materials under the provisions of § 266.20(b) of this chapter.) (b) The use of waste or used oil or other... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES...

  19. The Gateway to Educational Materials: An Evaluation of an Online Resource for Teachers and an Exploration of User Behavior.

    ERIC Educational Resources Information Center

    Fitzgerald, Mary Ann; Lovin, Vicki; Branch, Robert Maribe

    2003-01-01

    Explains Gateway to Educational Materials (GEM), http://www.thegateway.org/ an online indexed database of lesson plans designed for teachers. Evaluates GEM and explores characteristics of teachers who use it to determine whether teachers possessed the technological skills needed to use GEM and if they were successful in their search for…

  20. User's manual for three dimensional FDTD version D code for scattering from frequency-dependent dielectric and magnetic materials

    NASA Astrophysics Data System (ADS)

    Beggs, John H.; Luebbers, Raymond J.; Kunz, Karl S.

    1992-01-01

    The Penn State Finite Difference Time Domain Electromagnetic Scattering Code version D is a 3-D numerical electromagnetic scattering code based upon the finite difference time domain technique (FDTD). The manual provides a description of the code and corresponding results for several scattering problems. The manual is organized into 14 sections: introduction; description of the FDTD method; operation; resource requirements; version D code capabilities; a brief description of the default scattering geometry; a brief description of each subroutine; a description of the include file; a section briefly discussing Radar Cross Section computations; a section discussing some scattering results; a sample problem setup section; a new problem checklist; references and figure titles. The FDTD technique models transient electromagnetic scattering and interactions with objects of arbitrary shape and/or material composition. In the FDTD method, Maxwell's curl equations are discretized in time-space and all derivatives (temporal and spatial) are approximated by central differences.

  1. Rapid Copper Metallization of Textile Materials: a Controlled Two-Step Route to Achieve User-Defined Patterns under Ambient Conditions.

    PubMed

    Zhang, Shuang-Yuan; Guan, Guijian; Jiang, Shan; Guo, Hongchen; Xia, Jing; Regulacio, Michelle D; Wu, Mingda; Shah, Kwok Wei; Dong, Zhili; Zhang, Jie; Han, Ming-Yong

    2015-09-30

    Throughout history earth-abundant copper has been incorporated into textiles and it still caters to various needs in modern society. In this paper, we present a two-step copper metallization strategy to realize sequentially nondiffusive copper(II) patterning and rapid copper deposition on various textile materials, including cotton, polyester, nylon, and their mixtures. A new, cost-effective formulation is designed to minimize the copper pattern migration on textiles and to achieve user-defined copper patterns. The metallized copper is found to be very adhesive and stable against washing and oxidation. Furthermore, the copper-metallized textile exhibits excellent electrical conductivity that is ~3 times better than that of stainless steel and also inhibits the growth of bacteria effectively. This new copper metallization approach holds great promise as a commercially viable method to metallize an insulating textile, opening up research avenues for wearable electronics and functional garments. PMID:26361094

  2. ORNL Automated-In-Motion Evaluation Environment (AIMVEE) User Training and Testing Materials - U.S. Copyright TXu 1-797-273

    SciTech Connect

    Abercrombie, Robert K; Sheldon, Frederick T

    2012-01-01

    The AIMVEE/WIM system electronically retrieves deployment information, identifies vehicle automatically, and determines total weight, individual wheel weight, individual axle weights, axle spacing, and center-of-balance for any wheeled vehicle in motion. The AIMVEE/WIM system can also perform these functions statically for both wheel vehicles and cargo with information. The AIMVEE/WIM system incorporates digital images and applies cubing algorithms to determine length, width, height for cubic dimensions of both vehicle and cargo. Once all this information is stored, it electronically links to data collection and dissemination systems to provide actual weight and measurement information for planning, deployment, and in-transit visibility. The Static Scale Conversion (SSC) system is an unique enhancement to the AIMVEE/WIM system. It enables a SSC to weigh and measure vehicles and cargo dynamically (i.e., as they pass over the large scale and is included in the AIMVEE computer code base. The material copyrighted is the ORNL Automated-In-Motion Vehicle Evaluation Environment (AIMVEE)/Weigh-In-Motion User Training and Testing material. It includes instructional material in the set-up, operation and tear-down of the AIMVEE/WIM system. It also includes a final exam associated with the training.

  3. User Antennas

    NASA Technical Reports Server (NTRS)

    Jamnejad, Vahraz; Cramer, Paul

    1990-01-01

    The following subject areas are covered: (1) impact of frequency change of user and spacecraft antenna gain and size; (2) basic personal terminal antennas (impact of 20/30 GHz frequency separation; parametric studies - gain, size, weight; gain and figure of merit (G/T); design data for selected antenna concepts; critical technologies and development goals; and recommendations); and (3) user antenna radiation safety concerns.

  4. Hanford inventory program user`s manual

    SciTech Connect

    Hinkelman, K.C.

    1994-09-12

    Provides users with instructions and information about accessing and operating the Hanford Inventory Program (HIP) system. The Hanford Inventory Program is an integrated control system that provides a single source for the management and control of equipment, parts, and material warehoused by Westinghouse Hanford Company in various site-wide locations. The inventory is comprised of spare parts and equipment, shop stock, special tools, essential materials, and convenience storage items. The HIP replaced the following systems; ACA, ASP, PICS, FSP, WSR, STP, and RBO. In addition, HIP manages the catalog maintenance function for the General Supplies inventory stocked in the 1164 building and managed by WIMS.

  5. MAMA- User Feedback and Training Summary

    SciTech Connect

    Porter, Reid B.; Ruggiero, Christy E.

    2014-05-21

    This document describes the current state of the MAMA (Morphological Analysis of Materials) software user identified bugs, issues, and requests for improvements. It also lists Current users and current training methods.

  6. Modelling strain localization in granular materials using micropolar theory: mathematical formulations

    NASA Astrophysics Data System (ADS)

    Alsaleh, Mustafa I.; Voyiadjis, George Z.; Alshibli, Khalid A.

    2006-12-01

    It has been known that classical continuum mechanics laws fail to describe strain localization in granular materials due to the mathematical ill-posedness and mesh dependency. Therefore, a non-local theory with internal length scales is needed to overcome such problems. The micropolar and high-order gradient theories can be considered as good examples to characterize the strain localization in granular materials. The fact that internal length scales are needed requires micromechanical models or laws; however, the classical constitutive models can be enhanced through the stress invariants to incorporate the Micropolar effects. In this paper, Lade's single hardening model is enhanced to account for the couple stress and Cosserat rotation and the internal length scales are incorporated accordingly. The enhanced Lade's model and its material properties are discussed in detail; then the finite element formulations in the Updated Lagrangian Frame (UL) are used. The finite element formulations were implemented into a user element subroutine for ABAQUS (UEL) and the solution method is discussed in the companion paper. The model was found to predict the strain localization in granular materials with low dependency on the finite element mesh size. The shear band was found to reflect on a certain angle when it hit a rigid boundary. Applications for the model on plane strain specimens tested in the laboratory are discussed in the companion paper. Copyright

  7. UMAT Implementation of Coupled, Multilevel, Structural Deformation and Damage Analysis of General Hereditary Materials

    NASA Technical Reports Server (NTRS)

    Arnold, S. M.; Saleeb, A. F.; Wilt, T. E.; Trowbridge, D.

    2000-01-01

    be incorporated directly into a structural finite element code like ABAQUS for cost-effective, micromechanics based, large-scale component design and analysis. Our primary objective here is to report on these recent works conducted over the past decade, in the context of their incorporation into ABAQUS through the various user subroutines. Representative results will be shown to demonstrate the features of the developed schemes.

  8. Do You Know Your Music Users' Needs? A Library User Survey that Helps Enhance a User-Centered Music Collection

    ERIC Educational Resources Information Center

    Lai, Katie; Chan, Kylie

    2010-01-01

    While many surveys aim primarily at measuring general user satisfaction, this survey is dedicated to understanding music users' needs, usage patterns, and preferences towards various collections. Findings showed dissimilar use behavior and perceived importance of materials between academic- and performance-oriented music users. Needs for different…

  9. Fatigue strength reduction model: RANDOM3 and RANDOM4 user manual. Appendix 2: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

    NASA Technical Reports Server (NTRS)

    Boyce, Lola; Lovelace, Thomas B.

    1989-01-01

    FORTRAN programs RANDOM3 and RANDOM4 are documented in the form of a user's manual. Both programs are based on fatigue strength reduction, using a probabilistic constitutive model. The programs predict the random lifetime of an engine component to reach a given fatigue strength. The theoretical backgrounds, input data instructions, and sample problems illustrating the use of the programs are included.

  10. Fatigue crack growth model RANDOM2 user manual. Appendix 1: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

    NASA Technical Reports Server (NTRS)

    Boyce, Lola; Lovelace, Thomas B.

    1989-01-01

    FORTRAN program RANDOM2 is presented in the form of a user's manual. RANDOM2 is based on fracture mechanics using a probabilistic fatigue crack growth model. It predicts the random lifetime of an engine component to reach a given crack size. Details of the theoretical background, input data instructions, and a sample problem illustrating the use of the program are included.

  11. SMAUMAT_ITI

    2004-02-02

    The software is an ABAQUS/Standard UMAT (user defined material behavior subroutine) that implements the constitutive model for shape-memory alloy materials developed by Jannetti et. al. (2003a) using a fully implicit time integration scheme to integrate the constitutive equations. The UMAT is used in conjunction with ABAQUS/Standard to perform a finite-element analysis of SMA materials.

  12. CHEMFORM user`s guide

    SciTech Connect

    Sjoreen, A.; Toran, L.

    1996-01-01

    CHEMFORM is a DOS-based program which converts geochemical data files into the format read by the U.S. Geological Survey family of models: WATEQ4F, PHREEQE, or NETPATH. These geochemical models require data formatted in a particular order, which typically does not match data storage. CHEMFORM converts geochemical data that are stored in an ASCII file to input files that can be read by these models, without being re-entered by hand. The data may be in any order and format in the original file, as long as they are separated by blanks. The location of each data element in the input file is entered in CHEMFORM. Any required data that are not present in your file may also be entered. The positions of the data in the input file are saved to be used as defaults for the next run. CHEMFORM runs in two modes. In the first mode, it will read one input file and write one output file. The input file may contain data on multiple lines, and the user will specify both line number and position of each item in CHEMFORM. This mode facilitates the conversion of the input from one model to the format needed by another model. In the second mode, the CHEMFORM input files contains more than one water analysis. All the geochemical data for a given sample are stored on one line, and CHEMFORM writes an output file for each line. This mode is useful when many samples are available for a site in the same format (different monitoring points or samples taken at different times from one monitoring point).

  13. Prism users guide.

    SciTech Connect

    Weirs, V. Gregory

    2012-03-01

    Prism is a ParaView plugin that simultaneously displays simulation data and material model data. This document describes its capabilities and how to use them. A demonstration of Prism is given in the first section. The second section contains more detailed notes on less obvious behavior. The third and fourth sections are specifically for Alegra and CTH users. They tell how to generate the simulation data and SESAME files and how to handle aspects of Prism use particular to each of these codes.

  14. PARFUME User's Guide

    SciTech Connect

    Kurt Hamman

    2010-09-01

    PARFUME, a fuel performance analysis and modeling code, is being developed at the Idaho National Laboratory for evaluating gas reactor coated particle fuel assemblies for prismatic, pebble bed, and plate type fuel geometries. The code is an integrated mechanistic analysis tool that evaluates the thermal, mechanical, and physico-chemical behavior of coated fuel particles (TRISO) and the probability for fuel failure given the particle-to-particle statistical variations in physical dimensions and material properties that arise during the fuel fabrication process. Using a robust finite difference numerical scheme, PARFUME is capable of performing steady state and transient heat transfer and fission product diffusion analyses for the fuel. Written in FORTRAN 90, PARFUME is easy to read, maintain, and modify. Currently, PARFUME is supported only on MS Windows platforms. This document represents the initial version of the PARFUME User Guide, a supplement to the PARFUME Theory and Model Basis Report which describes the theoretical aspects of the code. User information is provided including: 1) code development, 2) capabilities and limitations, 3) installation and execution, 4) user input and output, 5) sample problems, and 6) error messages. In the near future, the INL plans to release a fully benchmarked and validated beta version of PARFUME.

  15. Materialism.

    PubMed

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. PMID:26301463

  16. A Material Model for FE-Simulation of UD Composites

    NASA Astrophysics Data System (ADS)

    Fischer, Sebastian

    2016-04-01

    Composite materials are being increasingly used for industrial applications. CFRP is particularly suitable for lightweight construction due to its high specific stiffness and strength properties. Simulation methods are needed during the development process in order to reduce the effort for prototypes and testing. This is particularly important for CFRP, as the material is costly. For accurate simulations, a realistic material model is needed. In this paper, a material model for the simulation of UD-composites including non-linear material behaviour and damage is developed and implemented in Abaqus. The material model is validated by comparison with test results on a range of test specimens.

  17. Analysis of Academic Attitudes and Existing Processes to Inform the Design of Teaching and Learning Material Repositories: A User-Centred Approach

    ERIC Educational Resources Information Center

    King, Melanie; Loddington, Steve; Manuel, Sue; Oppenheim, Charles

    2008-01-01

    The last couple of years have brought a rise in the number of institutional repositories throughout the world and within UK Higher Education institutions, with the majority of these repositories being devoted to research output. Repositories containing teaching and learning material are less common and the workflows and business processes…

  18. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    SciTech Connect

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-05-04

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  19. Franklin: User Experiences

    SciTech Connect

    National Energy Research Supercomputing Center; He, Yun; Kramer, William T.C.; Carter, Jonathan; Cardo, Nicholas

    2008-05-07

    The newest workhorse of the National Energy Research Scientific Computing Center is a Cray XT4 with 9,736 dual core nodes. This paper summarizes Franklin user experiences from friendly early user period to production period. Selected successful user stories along with top issues affecting user experiences are presented.

  20. The User Experience

    ERIC Educational Resources Information Center

    Schmidt, Aaron

    2010-01-01

    User experience (UX) is about arranging the elements of a product or service to optimize how people will interact with it. In this article, the author talks about the importance of user experience and discusses the design of user experiences in libraries. He first looks at what UX is. Then he describes three kinds of user experience design: (1)…

  1. Radcalc for Windows, User`s Manual. Volume 1

    SciTech Connect

    Green, J.R.

    1995-09-27

    Radcalc for Windows is a user-friendly menu-driven Windows-compatible software program with applications in the transportation of radioactive materials. It calculates the radiolytic generation of hydrogen gas in the matrix of low-level and high-level radioactive waste using NRC-accepted methodology. It computes the quantity of a radionuclide and its associated products for a given period of time. In addition, the code categorizes shipment quantities as radioactive, Type A or Type B, limited quantity, low specific activity, highway route controlled, and fissile excepted using DOT definitions and methodologies, as outlined in 49 CFR Subchapter C. The code has undergone extensive testing and validation. Volume I is a User`s Guide, and Volume II is the Technical Manual for Radcalc for Windows.

  2. NASCAP user's manual, 1978

    NASA Technical Reports Server (NTRS)

    Cassidy, J. J., III

    1978-01-01

    NASCAP simulates the charging process for a complex object in either tenuous plasma (geosynchronous orbit) or ground test (electron gun source) environment. Program control words, the structure of user input files, and various user options available are described in this computer programmer's user manual.

  3. Atmoshperic Science User Forum

    Atmospheric Science Data Center

    2016-02-26

    article title:  Atmospheric Science User Forum     View Larger Image ... ASDC is pleased to announce the release of the Atmospheric Science User Forum. The purpose of this forum is to improve user service, quality, and efficiency of NASA atmospheric science data by providing a quick and easy way to facilitate scientific ...

  4. DOSFAC2 user`s guide

    SciTech Connect

    Young, M.L.; Chanin, D.

    1997-12-01

    This document describes the DOSFAC2 code, which is used for generating dose-to-source conversion factors for the MACCS2 code. DOSFAC2 is a revised and updated version of the DOSFAC code that was distributed with version 1.5.11 of the MACCS code. included are (1) an overview and background of DOSFAC2, (2) a summary of two new functional capabilities, and (3) a user`s guide. 20 refs., 5 tabs.

  5. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  6. Effects of Subscale Size and Shape on Global Energy Dissipation in a Multiscale Model of a Fiber-Reinforced Composite Exhibiting Post-Peak Strain Softening Using Abaqus and FEAMAC

    NASA Technical Reports Server (NTRS)

    Pineda, Evan, J.; Bednarcyk, Brett, A.; Arnold, Steven, M.

    2012-01-01

    A mesh objective crack band model is implemented in the generalized method of cells (GMC) micromechanics model to predict failure of a composite repeating unit cell (RUC). The micromechanics calculations are achieved using the MAC/GMC core engine within the ImMAC suite of micromechanics codes, developed at the NASA Glenn Research Center. The microscale RUC is linked to a macroscale Abaqus/Standard finite element model using the FEAMAC multiscale framework (included in the ImMAC suite). The effects of the relationship between the characteristic length of the finite element and the size of the microscale RUC on the total energy dissipation of the multiscale model are investigated. A simple 2-D composite square subjected to uniaxial tension is used to demonstrate the effects of scaling the dimensions of the RUC such that the length of the sides of the RUC are equal to the characteristic length of the finite element. These results are compared to simulations where the size of the RUC is fixed, independent of the element size. Simulations are carried out for a variety of mesh densities and element shapes, including square and triangular. Results indicate that a consistent size and shape must be used to yield preserve energy dissipation across the scales.

  7. How the user views visual displays

    SciTech Connect

    Brown-VanHoozer, S.A.

    1995-12-31

    Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations. Unfortunately, by ignoring the importance of the integration of the user interface at the psychophysiological level, the result can be ineffective use of a system leading to an inherently error- and failure-prone system. Therefore, to minimize failures in a human-interactive system, it is essential that designers understand how each user`s processing characteristics affect how the user gathers and processes information. By understanding the significant processing characteristics of the user, designers can implement practical and effective visual displays (or any other type of system) that are more desirable to all users. The material presented in this paper is based on a general study that involved users` perspective views of how visual displays should be designed for effective use. The methodology used was Neuro-Linguistic Programming (NLP), because of its applicability in expanding design choices from the users` ``model of the world.`` The findings of the study have provided a beginning in the development of user comfort parameters and visual displays.

  8. MADS Users' Guide

    NASA Technical Reports Server (NTRS)

    Moerder, Daniel D.

    2014-01-01

    MADS (Minimization Assistant for Dynamical Systems) is a trajectory optimization code in which a user-specified performance measure is directly minimized, subject to constraints placed on a low-order discretization of user-supplied plant ordinary differential equations. This document describes the mathematical formulation of the set of trajectory optimization problems for which MADS is suitable, and describes the user interface. Usage examples are provided.

  9. User Registration in EOSDIS

    NASA Astrophysics Data System (ADS)

    Murphy, K. J.; Mitchell, A. E.

    2009-12-01

    Throughout the lifetime of EOSDIS the topic of user registration has received varied attention. Initially, for example, users ordering data from the Earth Science Data Gateway were required to register for delivery of media orders, to check order status and save profile information for future interactions. As EOSDIS embraced evolution of its data systems, the mostly centralized search and order system was replaced with a more diverse set of interfaces allowing (mostly) anonymous online access to data, tools and services. The changes to EOSDIS were embraced by users but the anonymous nature of the interaction made it more difficult to characterize users, capture metrics and provide customized services that benefit users. Additionally, new tools and interfaces have been developed without a centralized registration system. Currently a patchwork of independent registration systems exists throughout EOSDIS for ordering data and interacting with online tools and services. Each requires a separate username and password that must be managed by users. A consolidation of registration systems presents an opportunity to improve not only the user experience through tool customization and simplification of password management, but the understanding of users. This work discusses the options for implementing a common user registration for the EOSDIS, anticipated benefits and pitfalls.

  10. Preliminary ISIS users manual

    NASA Technical Reports Server (NTRS)

    Grantham, C.

    1979-01-01

    The Interactive Software Invocation (ISIS), an interactive data management system, was developed to act as a buffer between the user and host computer system. The user is provided by ISIS with a powerful system for developing software or systems in the interactive environment. The user is protected from the idiosyncracies of the host computer system by providing such a complete range of capabilities that the user should have no need for direct access to the host computer. These capabilities are divided into four areas: desk top calculator, data editor, file manager, and tool invoker.

  11. LCS Users Manual

    SciTech Connect

    A.J. Redd; D.W. Ignat

    1998-02-01

    The Lower Hybrid Simulation Code (LSC) is a computational model of lower hybrid current drive in the presence of an electric field. Details of geometry, plasma profiles, and circuit equations are treated. Two-dimensional velocity space effects are approximated in a one-dimensional Fokker-Planck treatment. The LSC was originally written to be a module for lower hybrid current drive called by the Tokamak Simulation Code (TSC), which is a numerical model of an axisymmetric tokamak plasma and the associated control systems. The TSC simulates the time evolution of a free boundary plasma by solving the MHD equations on a rectangular computational grid. The MHD equations are coupled to the external circuits (representing poloidal field coils) through the boundary conditions. The code includes provisions for modeling the control system, external heating, and fusion heating. The LSC module can also be called by the TRANSP code. TRANSP represents the plasma with an axisymmetric, fixed-boundary model and focuses on calculation of plasma transport to determine transport coefficients from data on power inputs and parameters reached. This manual covers the basic material needed to use the LSC. If run in conjunction with TSC, the "TSC Users Manual" should be consulted. If run in conjunction with TRANSP, on-line documentation will be helpful. A theoretical background of the governing equations and numerical methods is given. Information on obtaining, compiling, and running the code is also provided.

  12. SERV user`s guide. Final report

    SciTech Connect

    Koontz, M.D.; Bakhsh, H.; Lee, S.M.

    1995-01-01

    The Sizing of Energy Recovery Ventilator (SERV) software described in this manual is intended to size an energy recovery ventilator in new and existing single-family residences, based on ASHRAE guidelines for the rate at which outdoor air is to be delivered to an indoor space to ensure acceptable air quality. The user is asked to select a city that has climatic conditions most representative of the house under consideration. Other inputs required from the user include: (1) house leakiness and terrain sheltering factors; (2) estimated annual house energy costs; (3) number, capacity and weekly operation hours for vented exhaust fans; and (4) HVAC system COP/efficiency values. Default values (which the user can override) are provided for most input parameters, and help screens are provided to assist the user in determining appropriate input values. The program estimates the average air infiltration rates for summer and winter, and combines these calculations with estimates of ventilation due to intermittent use of exhaust fans in determining the baseline ventilation rate. An energy recovery ventilator is sized to provide any supplemental ventilation necessary to satisfy air change requirements imposed by ASHRAE Standard 62-1989 (Ventilation for Acceptable Air Quality). The program then calculates (1) the annual energy and associated cost for providing the supplemental ventilation, and (2) the relative impact of the added ventilation on indoor concentrations of four pollutants--carbon monoxide, nitrogen dioxide, formaldehyde and radon.

  13. TMAP7 User Manual

    SciTech Connect

    Glen R. Longhurst

    2008-12-01

    The TMAP Code was written at the Idaho National Engineering and Environmental Laboratory by Brad Merrill and James Jones in the late 1980s as a tool for safety analysis of systems involving tritium. Since then it was upgraded to TMAP4 and has been used in numerous applications including experiments supporting fusion safety, predictions for advanced systems such as the International Thermonuclear Experimental Reactor (ITER), and estimates involving tritium production technologies. Its further upgrade to TMAP2000 and now to TMAP7 was accomplished in response to several needs. TMAP and TMAP4 had the capacity to deal with only a single trap for diffusing gaseous species in solid structures. TMAP7 includes up to three separate traps and up to 10 diffusing species. The original code had difficulty dealing with heteronuclear molecule formation such as HD and DT under solution-law dependent diffusion boundary conditions. That difficulty has been overcome. TMAP7 automatically generates heteronuclear molecular partial pressures when solubilities and partial pressures of the homonuclear molecular species are provided for law-dependent diffusion boundary conditions. A further sophistication is the addition of non-diffusing surface species. Atoms such as oxygen or nitrogen or formation and decay or combination of hydroxyl radicals on metal surfaces are sometimes important in reactions with diffusing hydrogen isotopes but do not themselves diffuse appreciably in the material. TMAP7 will accommodate up to 30 such surface species, allowing the user to specify relationships between those surface concentrations and partial pressures of gaseous species above the surfaces or to form them dynamically by combining diffusion species or other surface species. Additionally, TMAP7 allows the user to include a surface binding energy and an adsorption barrier energy. The code includes asymmetrical diffusion between the surface sites and regular diffusion sites in the bulk. All of the

  14. TMAP7 User Manual

    SciTech Connect

    Glen R. Longhurst

    2006-09-01

    The TMAP Code was written at the Idaho National Engineering and Environmental Laboratory by Brad Merrill and James Jones in the late 1980s as a tool for safety analysis of systems involving tritium. Since then it has been upgraded to TMAP4 and has been used in numerous applications including experiments supporting fusion safety, predictions for advanced systems such as the International Thermonuclear Experimental Reactor (ITER), and estimates involving tritium production technologies. Its further upgrade to TMAP2000 and now to TMAP7 was accomplished in response to several needs. TMAP and TMAP4 had the capacity to deal with only a single trap for diffusing gaseous species in solid structures. TMAP7 includes up to three separate traps and up to 10 diffusing species. The original code had difficulty dealing with heteronuclear molecule formation such as HD and DT. That has been removed. Under pre-specified boundary enclosure conditions and solution-law dependent diffusion boundary conditions, such as Sieverts' law, TMAP7 automatically generates heteronuclear molecular partial pressures when solubilities and partial pressures of the homonuclear molecular species are provided for law-dependent diffusion boundary conditions. A further sophistication is the addition of non-diffusing surface species. Atoms such as oxygen or nitrogen or formation and decay or combination of hydroxyl radicals on metal surfaces are sometimes important in reactions with diffusing hydrogen isotopes but do not themselves diffuse appreciably in the material. TMAP7 will accommodate up to 30 such surface species, allowing the user to specify relationships between those surface concentrations and partial pressures of gaseous species above the surfaces or to form them dynamically by combining diffusion species or other surface species. Additionally, TMAP7 allows the user to include a surface binding energy and an adsorption barrier energy. The code includes asymmetrical diffusion between the surface

  15. MIRADS-2 user's manual

    NASA Technical Reports Server (NTRS)

    1975-01-01

    An on-line data storage and retrieval system which allows the user to extract and process information from stored data bases is described. The capabilities of the system are provided by a general purpose computer program containing several functional modules. The modules contained in MIRADS are briefly described along with user terminal operation procedures and MIRADS commands.

  16. LANES 1 Users' Guide

    NASA Technical Reports Server (NTRS)

    Jordan, J.

    1985-01-01

    This document is intended for users of the Local Area Network Extensible Simulator, version I. This simulator models the performance of a Fiber Optic network under a variety of loading conditions and network characteristics. The options available to the user for defining the network conditions are described in this document. Computer hardware and software requirements are also defined.

  17. User Working Group Charter

    Atmospheric Science Data Center

    2014-04-29

    ... of the ASDC user interface, development of the Information Management System (IMS), and ASDC user conferences requirements for and ... formal activity and status reports to ASDC and EOSDIS management as appropriate.  UWG members are expected to attend the UWG ...

  18. KDYNA user's manual

    SciTech Connect

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  19. User's Guide for SKETCH

    NASA Technical Reports Server (NTRS)

    Hedgley, David R., Jr.

    2000-01-01

    A user's guide for the computer program SKETCH is presented on this disk. SKETCH solves a popular problem in computer graphics-the removal of hidden lines from images of solid objects. Examples and illustrations are included in the guide. Also included is the SKETCH program, so a user can incorporate the information into a particular software system.

  20. The PANTHER User Experience

    SciTech Connect

    Coram, Jamie L.; Morrow, James D.; Perkins, David Nikolaus

    2015-09-01

    This document describes the PANTHER R&D Application, a proof-of-concept user interface application developed under the PANTHER Grand Challenge LDRD. The purpose of the application is to explore interaction models for graph analytics, drive algorithmic improvements from an end-user point of view, and support demonstration of PANTHER technologies to potential customers. The R&D Application implements a graph-centric interaction model that exposes analysts to the algorithms contained within the GeoGraphy graph analytics library. Users define geospatial-temporal semantic graph queries by constructing search templates based on nodes, edges, and the constraints among them. Users then analyze the results of the queries using both geo-spatial and temporal visualizations. Development of this application has made user experience an explicit driver for project and algorithmic level decisions that will affect how analysts one day make use of PANTHER technologies.

  1. Ground Software Maintenance Facility (GSMF) user's manual

    NASA Technical Reports Server (NTRS)

    Aquila, V.; Derrig, D.; Griffith, G.

    1986-01-01

    Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.

  2. MFIX documentation: User`s manual

    SciTech Connect

    Syamlal, M.

    1994-11-01

    MFIX (Multiphase Flow with Interphase exchanges) is a general-purpose hydro-dynamic model for describing chemical reactions and heat transfer in dense or dilute fluid-solids flows, which typically occur in energy conversion and chemical processing reactors. MFIX calculations give time-dependent information on pressure, temperature, composition, and velocity distributions in the reactors. The theoretical basis of the calculations is described in the MFIX Theory Guide. This report, which is the MFIX User`s Manual, gives an overview of the numerical technique, and describes how to install the MFIX code and post-processing codes, set up data files and run MFIX, graphically analyze MFIX results, and retrieve data from the output files. Two tutorial problems that highlight various features of MFIX are also discussed.

  3. User`s guide to MIDAS

    SciTech Connect

    Tisue, S.A.; Williams, N.B.; Huber, C.C.; Chun, K.C.

    1995-12-01

    Welcome to the MIDAS User`s Guide. This document describes the goals of the Munitions Items Disposition Action System (MIDAS) program and documents the MIDAS software. The main text first describes the equipment and software you need to run MIDAS and tells how to install and start it. It lists the contents of the database and explains how it is organized. Finally, it tells how to perform various functions, such as locating, entering, viewing, deleting, changing, transferring, and printing both textual and graphical data. Images of the actual computer screens accompany these explanations and guidelines. Appendix A contains a glossary of names for the various abbreviations, codes, and chemicals; Appendix B is a list of modem names; Appendix C provides a database dictionary and rules for entering data; and Appendix D describes procedures for troubleshooting problems associated with connecting to the MIDAS server and using MIDAS.

  4. Quality user support: Supporting quality users

    SciTech Connect

    Woolley, T.C.

    1994-12-31

    During the past decade, fundamental changes have occurred in technical computing in the oil industry. Technical computing systems have moved from local, fragmented quantity, to global, integrated, quality. The compute power available to the average geoscientist at his desktop has grown exponentially. Technical computing applications have increased in integration and complexity. At the same time, there has been a significant change in the work force due to the pressures of restructuring, and the increased focus on international opportunities. The profile of the user of technical computing resources has changed. Users are generally more mature, knowledgeable, and team oriented than their predecessors. In the 1990s, computer literacy is a requirement. This paper describes the steps taken by Oryx Energy Company to address the problems and opportunities created by the explosive growth in computing power and needs, coupled with the contraction of the business. A successful user support strategy will be described. Characteristics of the program include: (1) Client driven support; (2) Empowerment of highly skilled professionals to fill the support role; (3) Routine and ongoing modification to the support plan; (4) Utilization of the support assignment to create highly trained advocates on the line; (5) Integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.

  5. Aztec user`s guide. Version 1

    SciTech Connect

    Hutchinson, S.A.; Shadid, J.N.; Tuminaro, R.S.

    1995-10-01

    Aztec is an iterative library that greatly simplifies the parallelization process when solving the linear systems of equations Ax = b where A is a user supplied n x n sparse matrix, b is a user supplied vector of length n and x is a vector of length n to be computed. Aztec is intended as a software tool for users who want to avoid cumbersome parallel programming details but who have large sparse linear systems which require an efficiently utilized parallel processing system. A collection of data transformation tools are provided that allow for easy creation of distributed sparse unstructured matrices for parallel solution. Once the distributed matrix is created, computation can be performed on any of the parallel machines running Aztec: nCUBE 2, IBM SP2 and Intel Paragon, MPI platforms as well as standard serial and vector platforms. Aztec includes a number of Krylov iterative methods such as conjugate gradient (CG), generalized minimum residual (GMRES) and stabilized biconjugate gradient (BICGSTAB) to solve systems of equations. These Krylov methods are used in conjunction with various preconditioners such as polynomial or domain decomposition methods using LU or incomplete LU factorizations within subdomains. Although the matrix A can be general, the package has been designed for matrices arising from the approximation of partial differential equations (PDEs). In particular, the Aztec package is oriented toward systems arising from PDE applications.

  6. Radiological Toolbox User's Manual

    SciTech Connect

    Eckerman, KF

    2004-07-01

    A toolbox of radiological data has been assembled to provide users access to the physical, chemical, anatomical, physiological and mathematical data relevant to the radiation protection of workers and member of the public. The software runs on a PC and provides users, through a single graphical interface, quick access to contemporary data and the means to extract these data for further computations and analysis. The numerical data, for the most part, are stored within databases in SI units. However, the user can display and extract values using non-SI units. This is the first release of the toolbox which was developed for the U.S. Nuclear Regulatory Commission.

  7. User's Manual for FEM-BEM Method

    NASA Astrophysics Data System (ADS)

    Butler, Theresa

    2002-12-01

    A user's manual for using FORTRAN code to perform electromagnetic analysis of arbitrarily shaped material cylinders using a hybrid method that combines the finite element method (FEM) and the boundary element method (BEM). In this method, the material cylinder is enclosed by a fictitious boundary and the Maxwell's equations are solved by FEM inside the boundary and by BEM outside the boundary. The electromagnetic scattering on several arbitrarily shaped material cylinders using this FORTRAN code is computed to as examples.

  8. Interactive Office user's manual

    NASA Technical Reports Server (NTRS)

    Montgomery, Edward E.; Lowers, Benjamin; Nabors, Terri L.

    1990-01-01

    Given here is a user's manual for Interactive Office (IO), an executive office tool for organization and planning, written specifically for Macintosh. IO is a paperless management tool to automate a related group of individuals into one productive system.

  9. ARM User Survey Report

    SciTech Connect

    Roeder, LR

    2010-06-22

    The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users’ preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

  10. Bevalac user's handbook

    SciTech Connect

    Not Available

    1990-04-01

    This report is a users manual on the Bevalac accelerator facility. This paper discuses: general information; the Bevalac and its operation; major facilities and experimental areas; and experimental equipment.

  11. VOLTTRON: User Guide

    SciTech Connect

    Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

    2014-04-24

    This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  12. ULDA user's guide

    NASA Technical Reports Server (NTRS)

    Perry, Charleen; Driessen, Cornelius; Pasian, Fabio

    1989-01-01

    The Uniform Low Dispersion Archive (ULDA) is a software system which, in one sitting, allows one to obtain copies on one's personal computer of those International Ultraviolet Explorer (IUE) low dispersion spectra that are of interest to the user. Overviews and use instructions are given for two programs, one to search for and select spectra, and the other to convert those spectra into a form suitable for the user's image processing system.

  13. FAST User Guide

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Clucas, Jean; McCabe, R. Kevin; Plessel, Todd; Potter, R.; Cooper, D. M. (Technical Monitor)

    1994-01-01

    The Flow Analysis Software Toolkit, FAST, is a software environment for visualizing data. FAST is a collection of separate programs (modules) that run simultaneously and allow the user to examine the results of numerical and experimental simulations. The user can load data files, perform calculations on the data, visualize the results of these calculations, construct scenes of 3D graphical objects, and plot, animate and record the scenes. Computational Fluid Dynamics (CFD) visualization is the primary intended use of FAST, but FAST can also assist in the analysis of other types of data. FAST combines the capabilities of such programs as PLOT3D, RIP, SURF, and GAS into one environment with modules that share data. Sharing data between modules eliminates the drudgery of transferring data between programs. All the modules in the FAST environment have a consistent, highly interactive graphical user interface. Most commands are entered by pointing and'clicking. The modular construction of FAST makes it flexible and extensible. The environment can be custom configured and new modules can be developed and added as needed. The following modules have been developed for FAST: VIEWER, FILE IO, CALCULATOR, SURFER, TOPOLOGY, PLOTTER, TITLER, TRACER, ARCGRAPH, GQ, SURFERU, SHOTET, and ISOLEVU. A utility is also included to make the inclusion of user defined modules in the FAST environment easy. The VIEWER module is the central control for the FAST environment. From VIEWER, the user can-change object attributes, interactively position objects in three-dimensional space, define and save scenes, create animations, spawn new FAST modules, add additional view windows, and save and execute command scripts. The FAST User Guide uses text and FAST MAPS (graphical representations of the entire user interface) to guide the user through the use of FAST. Chapters include: Maps, Overview, Tips, Getting Started Tutorial, a separate chapter for each module, file formats, and system

  14. Metadata: A user`s view

    SciTech Connect

    Bretherton, F.P.; Singley, P.T.

    1994-12-31

    An analysis is presented of the uses of metadata from four aspects of database operations: (1) search, query, retrieval, (2) ingest, quality control, processing, (3) application to application transfer; (4) storage, archive. Typical degrees of database functionality ranging from simple file retrieval to interdisciplinary global query with metadatabase-user dialog and involving many distributed autonomous databases, are ranked in approximate order of increasing sophistication of the required knowledge representation. An architecture is outlined for implementing such functionality in many different disciplinary domains utilizing a variety of off the shelf database management subsystems and processor software, each specialized to a different abstract data model.

  15. User`s manual, version 1.00 for Monteburns, version 3.01

    SciTech Connect

    Poston, D.I.; Trellue, H.R.

    1998-06-01

    Monteburns is a fully automated tool that links the Monte Carlo transport code MCNP with the radioactive decay and burnup code ORIGEN2. Monteburns produces a large number of criticality and burnup results based on various material feed/removal specifications, power(s), and time intervals. The program processes input from the user that specifies the system geometry, initial material compositions, feed/removal specifications, and other code-specific parameters. Various results from MCNP, ORIGEN2, and other calculations are then output successively as the code runs. The principle function of monteburns is to transfer one-group cross section and flux values from MCNP to ORIGEN2, and then transfer the resulting material compositions (after irradiation and/or decay) from ORIGEN2 back to MCNP in a repeated, cyclic fashion. The basic requirement of the code is that the user have a working MCNP input file and other input parameters; all interaction with ORIGEN2 and other calculations are performed by monteburns. This report serves as a user`s manual for monteburns. It describes how the code functions, what input the user must provide, the calculations performed by the code, and it presents the format required for input files, as well as samples of these files. Monteburns is still in a developmental stage; thus, additions and/or changes may be made over time, and the user`s manual will change as well. This is the first version of the user`s manual (valid for monteburns version 3.01); users should contact the authors to inquire if a more recent version is available.

  16. FACET: SLAC___s New User Facility

    SciTech Connect

    Clarke, C.I.; Decker, F.-J.; England, R.J.; Erickson, R.A.; Hast, C.; Hogan, M.J.; Li, S.Z.; Litos, M.D.; Nosochkov, Y.; Seeman, J.T.; Sheppard, J.; Wienands, U.; Woodley, M.; Yocky, G.; /SLAC

    2012-05-16

    FACET (Facility for Advanced Accelerator Experimental Tests) is a new User Facility at SLAC National Accelerator Laboratory. The first User Run started in spring 2012 with 20 GeV, 3 nC electron beams. The facility is designed to provide short (20 {micro}m) bunches and small (20 {micro}m wide) spot sizes, producing uniquely high power beams. FACET supports studies from many fields but in particular those of Plasma Wakefield Acceleration and Dielectric Wakefield Acceleration. The creation of drive and witness bunches and shaped bunch profiles is possible with 'Notch' Collimation. FACET is also a source of THz radiation for material studies. Positrons will be available at FACET in future user runs. We present the User Facility and the available tools and opportunities for future experiments.

  17. Demonstration and Validation Assets: User Manual Development

    SciTech Connect

    2008-06-30

    This report documents the development of a database-supported user manual for DEMVAL assets in the NSTI area of operations and focuses on providing comprehensive user information on DEMVAL assets serving businesses with national security technology applications in southern New Mexico. The DEMVAL asset program is being developed as part of the NSPP, funded by both Department of Energy (DOE) and NNSA. This report describes the development of a comprehensive user manual system for delivering indexed DEMVAL asset information to be used in marketing and visibility materials and to NSTI clients, prospective clients, stakeholders, and any person or organization seeking it. The data about area DEMVAL asset providers are organized in an SQL database with updateable application structure that optimizes ease of access and customizes search ability for the user.

  18. KAYENTA: Theory and User's Guide

    SciTech Connect

    Brannon, Rebecca Moss; Fuller, Timothy Jesse; Strack, Otto Eric; Fossum, Arlo Frederick; Sanchez, Jason James

    2015-02-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term (3z(Byield(3y (Bis generalized to include any form of inelastic material response (including microcrack growth and pore collapse) that can result in non-recovered strain upon removal of loads on a material element. Kayenta supports optional anisotropic elasticity associated with joint sets, as well as optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  19. TWEAT `95: User`s documentation update

    SciTech Connect

    Robertus, B.; Lambert, R.

    1996-03-01

    This report is designed to be a supplement to TWEAT`94 (PVTD-C94-05.01K Rev.1). It is intended to describe the primary features of the Ternary Waste Envelope Assessment Tool software package that have been added in FY`95 and how to use them. It contains only minimal duplication of information found in TWEAT`94 even though all features of TWEAT`94 will still be available. Emphasis on this Update is the binary plotting capability and the OWL Import modifications. Like it`s predecessors, this manual does not provide instructions for modifying the program code itself. The user of TWEAT`95 is expected to be familiar with the basic concepts and operation of the TWEAT software as discussed in TWEAT`94. Software and hardware requirements have not changed since TWEAT`94. TWEAT has now been tested using Macintosh System software versions 6.05 through 7.5.

  20. GRSAC Users Manual

    SciTech Connect

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  1. Evaluating User Participation and User Influence in an Enterprise System

    ERIC Educational Resources Information Center

    Gibbs, Martin D.

    2010-01-01

    Does user influence have an impact on the data quality of an information systems development project? What decision making should users have? How can users effectively be engaged in the process? What is success? User participation is considered to be a critical success factor for Enterprise Resource Planning (ERP) projects, yet there is little…

  2. PALP -- a user manual

    NASA Astrophysics Data System (ADS)

    Braun, Andreas P.; Knapp, Johanna; Scheidegger, Emanuel; Skarke, Harald; Walliser, Nils-Ole

    2013-10-01

    This article provides a complete user's guide to version 2.1 of the toric geometry package PALP by Maximilian Kreuzer and others. In particular, previously undocumented applications such as the program Nef.X are discussed in detail. New features of PALP 2.1 include an extension of the program mori.x which can now compute Mori cones and intersection rings of arbitrary dimension and can also take specific triangulations of reflexive polytopes as input. Furthermore, the program nef.x is enhanced by an option that allows the user to enter reflexive Gorenstein cones as input. The present documentation is complemented by a Wiki which is available online.

  3. CARE 3 User's Workshop

    NASA Technical Reports Server (NTRS)

    1988-01-01

    A user's workshop for CARE 3, a reliability assessment tool designed and developed especially for the evaluation of high reliability fault tolerant digital systems, was held at NASA Langley Research Center on October 6 to 7, 1987. The main purpose of the workshop was to assess the evolutionary status of CARE 3. The activities of the workshop are documented and papers are included by user's of CARE 3 and NASA. Features and limitations of CARE 3 and comparisons to other tools are presented. The conclusions to a workshop questionaire are also discussed.

  4. MERBoard User's Guide

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shab, Ted; Vera, Alonso; Gaswiller, Rich; Clancy, Daniel (Technical Monitor)

    2002-01-01

    An important goal of MERBoard is to allow users to quickly and easily share information. The front-end interface is physically a large plasma computer display with a touch screen, allowing multiple people to interact shoulder-to-shoulder or in a small meeting area. The software system allows people to interactively create digital whiteboards, browse the web, give presentations and connect to personal computers (for example, to run applications not on the MERBoard computer itself). There are four major integrated applications: a browser; a remote connection to another computer (VNC); a digital whiteboard; and a digital space (MERSpace), which is a digital repository for each individual user.

  5. TIA Software User's Manual

    NASA Technical Reports Server (NTRS)

    Cramer, K. Elliott; Syed, Hazari I.

    1995-01-01

    This user's manual describes the installation and operation of TIA, the Thermal-Imaging acquisition and processing Application, developed by the Nondestructive Evaluation Sciences Branch at NASA Langley Research Center, Hampton, Virginia. TIA is a user friendly graphical interface application for the Macintosh 2 and higher series computers. The software has been developed to interface with the Perceptics/Westinghouse Pixelpipe(TM) and PixelStore(TM) NuBus cards and the GW Instruments MacADIOS(TM) input-output (I/O) card for the Macintosh for imaging thermal data. The software is also capable of performing generic image-processing functions.

  6. RADTRAN 5 user guide.

    SciTech Connect

    Kanipe, Frances L.; Neuhauser, Karen Sieglinde

    2003-07-01

    This User Guide for the RADTRAN 5 computer code for transportation risk analysis describes basic risk concepts and provides the user with step-by-step directions for creating input files by means of either the RADDOG input file generator software or a text editor. It also contains information on how to interpret RADTRAN 5 output, how to obtain and use several types of important input data, and how to select appropriate analysis methods. Appendices include a glossary of terms, a listing of error messages, data-plotting information, images of RADDOG screens, and a table of all data in the internal radionuclide library.

  7. Advanced Test Reactor National Scientific User Facility

    SciTech Connect

    Frances M. Marshall; Jeff Benson; Mary Catherine Thelen

    2011-08-01

    The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is a large test reactor for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The ATR is a pressurized, light-water, high flux test reactor with a maximum operating power of 250 MWth. The INL also has several hot cells and other laboratories in which irradiated material can be examined to study material irradiation effects. In 2007 the US Department of Energy (DOE) designated the ATR as a National Scientific User Facility (NSUF) to facilitate greater access to the ATR and the associated INL laboratories for material testing research by a broader user community. This paper highlights the ATR NSUF research program and the associated educational initiatives.

  8. Guiding Users to Unmediated Interlibrary Loan

    ERIC Educational Resources Information Center

    Adams, Carolyn; Ressel, Margret J.; Silva, Erin S.

    2009-01-01

    This article provides a practitioner's guide to marketing user-initiated borrowing at the point of need. By reviewing interlibrary loan book requests and manually transferring them to an INN-Reach consortial system, Link+, the University of Nevada, Reno Libraries were able to successfully market the service, deliver materials faster, and save…

  9. TRACI: USER'S GUIDE AND SYSTEM DOCUMENTATION

    EPA Science Inventory

    TRACI allows the examination of the potential for impacts associated with the raw material usage and chemical releases resulting from the processes involved in producing a product. TRACI allows the user to examine the potential for impacts for a single life cycle stage, or the w...

  10. Users' Behavior towards Ubiquitous M-Learning

    ERIC Educational Resources Information Center

    Suki, Norazah Mohd; Suki, Norbayah Mohd

    2011-01-01

    Mobile technologies have enabled a new way of communicating, for whom mobile communications are part of normal daily interaction. This paper explores the proposed and verified Technology Acceptance Model (TAM) that can be employed to explain the acceptance of Mobile Learning (M-learning), an activity in which users access learning material with…

  11. Los Alamos waste drum shufflers users manual

    SciTech Connect

    Rinard, P.M.; Adams, E.L.; Painter, J.

    1993-08-24

    This user manual describes the Los Alamos waste drum shufflers. The primary purpose of the instruments is to assay the mass of {sup 235}U (or other fissile materials) in drums of assorted waste. It can perform passive assays for isotopes that spontaneously emit neutrons or active assays using the shuffler technique as described on this manual.

  12. CD-ROMs and Users' Reactions.

    ERIC Educational Resources Information Center

    Chen, Yu-Hui

    Users of optical data disk (CD-ROM) materials at the Main Library workstations of the State University of New York at Albany were surveyed to examine the problems they encountered while conducting their searches, identify factors that interfere with their task performance, determine their needs with regard to improvement in the databases they…

  13. Perspectives on User Satisfaction Surveys.

    ERIC Educational Resources Information Center

    Cullen, Rowena

    2001-01-01

    Discusses academic libraries, digital environments, increasing competition, the relationship between service quality and user satisfaction, and user surveys. Describes the SERVQUAL model that measures service quality and user satisfaction in academic libraries; considers gaps between user expectations and managers' perceptions of user…

  14. KAYENTA : theory and user's guide.

    SciTech Connect

    Brannon, Rebecca Moss; Fossum, Arlo Frederick; Strack, Otto Eric

    2009-03-01

    The physical foundations and domain of applicability of the Kayenta constitutive model are presented along with descriptions of the source code and user instructions. Kayenta, which is an outgrowth of the Sandia GeoModel, includes features and fitting functions appropriate to a broad class of materials including rocks, rock-like engineered materials (such as concretes and ceramics), and metals. Fundamentally, Kayenta is a computational framework for generalized plasticity models. As such, it includes a yield surface, but the term 'yield' is generalized to include any form of inelastic material response including microcrack growth and pore collapse. Kayenta supports optional anisotropic elasticity associated with ubiquitous joint sets. Kayenta supports optional deformation-induced anisotropy through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). The governing equations are otherwise isotropic. Because Kayenta is a unification and generalization of simpler models, it can be run using as few as 2 parameters (for linear elasticity) to as many as 40 material and control parameters in the exceptionally rare case when all features are used. For high-strain-rate applications, Kayenta supports rate dependence through an overstress model. Isotropic damage is modeled through loss of stiffness and strength.

  15. Advanced Neutron Source: The users' perspective

    SciTech Connect

    Peretz, F.J.

    1990-01-01

    User experiments will cover fields such as activation analysis of pollutants, irradiation of materials for the fusion program, and neutron scattering studies of materials as diverse as viruses, aerospace composites, and superconductors. Production capabilities must also be provided for the production of isotopes, especially of transuranic elements. The different ways in which these research areas and their required infrastructure influence the design of the Advanced Neutron Source will be the subject of this paper.

  16. User Oriented Product Evaluation.

    ERIC Educational Resources Information Center

    Alkin, Marvin C.; Wingard, Joseph

    While the educational product development field has expanded tremendously over the last 15 years, there is a paucity of conveniently assembled and readily interpretable information that would enable users to make accurate and informed evaluations of different, but comparable, instructional products. Minimum types of validation data which should be…

  17. User Requirements, April 1969.

    ERIC Educational Resources Information Center

    California Univ., Berkeley. Dept. of Physical Planning and Construction.

    In July 1964, the University of California Board of Regents authorized the project now known as URBS-The University Residential Building System Project. The initial stage in the development of the building system was the determination of the user requirements for the building type in question. This report is the result of investigation undertaken…

  18. EREP users handbook

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Revised Skylab spacecraft, experiments, and mission planning information is presented for the Earth Resources Experiment Package (EREP) users. The major hardware elements and the medical, scientific, engineering, technology and earth resources experiments are described. Ground truth measurements and EREP data handling procedures are discussed. The mission profile, flight planning, crew activities, and aircraft support are also outlined.

  19. User Authentication. SPEC Kit.

    ERIC Educational Resources Information Center

    Plum, Terry, Comp.; Bleiler, Richard, Comp.

    2001-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit presents the results of a survey of Association of Research Libraries (ARL) member libraries designed to examine the systems research libraries use to authenticate and authorize the users of their online networked information resources. A total of 52 of 121 ARL member libraries responded to…

  20. Empowering the User.

    ERIC Educational Resources Information Center

    Glenn, Terrence J.; Mechley, Victor P.

    With respect to the college's information systems, there were three major challenges facing Ohio's Cincinnati Technical College (CTC) in 1991. The expanding use of personal computers (PC's) and non-integrated systems often duplicated efforts and data on CTC's existing computer systems, users were demanding more access to data and more integration…

  1. User Centric Policy Management

    ERIC Educational Resources Information Center

    Cheek, Gorrell P.

    2013-01-01

    Internet use, in general, and online social networking sites, in particular, are experiencing tremendous growth with hundreds of millions of active users. As a result, there is a tremendous amount of privacy information and content online. Protecting this information is a challenge. Access control policy composition is complex, laborious and…

  2. Power User Interface

    NASA Technical Reports Server (NTRS)

    Pfister, Robin; McMahon, Joe

    2006-01-01

    Power User Interface 5.0 (PUI) is a system of middleware, written for expert users in the Earth-science community, PUI enables expedited ordering of data granules on the basis of specific granule-identifying information that the users already know or can assemble. PUI also enables expert users to perform quick searches for orderablegranule information for use in preparing orders. PUI 5.0 is available in two versions (note: PUI 6.0 has command-line mode only): a Web-based application program and a UNIX command-line- mode client program. Both versions include modules that perform data-granule-ordering functions in conjunction with external systems. The Web-based version works with Earth Observing System Clearing House (ECHO) metadata catalog and order-entry services and with an open-source order-service broker server component, called the Mercury Shopping Cart, that is provided separately by Oak Ridge National Laboratory through the Department of Energy. The command-line version works with the ECHO metadata and order-entry process service. Both versions of PUI ultimately use ECHO to process an order to be sent to a data provider. Ordered data are provided through means outside the PUI software system.

  3. TOTAL user manual

    NASA Technical Reports Server (NTRS)

    Johnson, Sally C.; Boerschlein, David P.

    1994-01-01

    Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all of the states and transitions in the model of a complex system can be devastatingly tedious and error-prone. Even with tools such as the Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST), the user must describe a system by specifying the rules governing the behavior of the system in order to generate the model. With the Table Oriented Translator to the ASSIST Language (TOTAL), the user can specify the components of a typical system and their attributes in the form of a table. The conditions that lead to system failure are also listed in a tabular form. The user can also abstractly specify dependencies with causes and effects. The level of information required is appropriate for system designers with little or no background in the details of reliability calculations. A menu-driven interface guides the user through the system description process, and the program updates the tables as new information is entered. The TOTAL program automatically generates an ASSIST input description to match the system description.

  4. Xwake 1.0 user`s manual

    SciTech Connect

    Saewert, G.; Jurgens, T.; Harfoush, F.

    1994-07-01

    Xwake is a user friendly Finite Difference Time Domain (FDTD) code for wake potential and impedance calculations of rotationally symmetric structures. Geometry boundaries are automatically meshed, or modeled, by a choice of either of two approximations, the typical {open_quotes}stepped edge{close_quotes} modeling, or the new {open_quotes}contour{close_quotes} modeling. Contouring means geometry boundaries described with curves and angles are not distorted to follow the rectangular grid; rather, the grid is adjusted to follow the contour of the geometry boundaries. It offers computer run time savings for large problems or intricate geometries for a given mesh compared with stepped edge modeling. Using stepped approximations with Xwake, on the other hand, one is able to model materials of any linear media type. Ultimately, three solutions are computed, wake potential versus wake length, wake spectrum versus frequency - a Fourier transform (FFT) of the wake potential, and wake impedance versus frequency. Xwake is an OSF/Motif application providing a graphical user interface (GUI) for ease of use. It is written in ANSI C for portability and currently runs on UNIX platforms.

  5. Stigma towards Marijuana Users and Heroin Users.

    PubMed

    Brown, Seth A

    2015-01-01

    Despite high levels of stigmatizing attitudes and behaviors toward individuals with substance use problems, there is surprisingly limited research on understanding the contributors to such high levels. College students with no history of marijuana or heroin use (N=250) completed self-report measures to examine the level of substance use stigma towards individuals using two illicit substances (marijuana and heroin) and the contribution of three perceiver characteristics (sex, previous contact with substance users, and five beliefs about substance use) to three dimensions of stigma (social distance, negative emotions, and forcing treatment). Greater levels of internalized stigma were noted towards individuals who use heroin (versus marijuana). For marijuana use, those who had less previous contact and higher endorsement of certain beliefs (rarity, severity, and less controllability) were associated with greater stigmatizing attitudes. For heroin use, the associations were weak or non-existent. The findings strengthen the argument that substance use stigma needs to be examined and perhaps addressed substance by substance, rather than as a group. Further, contact interventions may be a particularly effective strategy for altering substance use stigma. PMID:26148124

  6. Enabling User to User Interactions in Web Lectures with History-Aware User Awareness

    ERIC Educational Resources Information Center

    Ketterl, Markus; Mertens, Robert; Wiesen, Christoph; Vornberger, Oliver

    2011-01-01

    Purpose: The purpose of this paper is to present a user interface for web lectures for engaging with other users while working with video based learning content. The application allows its users to ask questions about the content and to get answers from those users that currently online are more familiar with it. The filtering is based on the…

  7. Heating 7.2 user`s manual

    SciTech Connect

    Childs, K.W.

    1993-02-01

    HEATING is a general-purpose conduction heat transfer program written in Fortran 77. HEATING can solve steady-state and/or transient heat conduction problems in one-, two-, or three-dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may also be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heat-generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-environment or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General gray-body radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING uses a runtime memory allocation scheme to avoid having to recompile to match memory requirements for each specific problem. HEATING utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution, and conjugate gradient. Transient problems may be solved using any one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method. The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  8. Rooftop Unit Comparison Calculator User Manual

    SciTech Connect

    Miller, James D.

    2015-04-30

    This document serves as a user manual for the Packaged rooftop air conditioners and heat pump units comparison calculator (RTUCC) and is an aggregation of the calculator’s website documentation. Content ranges from new-user guide material like the “Quick Start” to the more technical/algorithmic descriptions of the “Methods Pages.” There is also a section listing all the context-help topics that support the features on the “Controls” page. The appendix has a discussion of the EnergyPlus runs that supported the development of the building-response models.

  9. Presto 4.18 user's guide.

    SciTech Connect

    Spencer, Benjamin Whiting

    2010-09-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  10. Presto 2.9 user's guide.

    SciTech Connect

    Jung, Joseph

    2008-05-01

    Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

  11. Outside users payload model

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The outside users payload model which is a continuation of documents and replaces and supersedes the July 1984 edition is presented. The time period covered by this model is 1985 through 2000. The following sections are included: (1) definition of the scope of the model; (2) discussion of the methodology used; (3) overview of total demand; (4) summary of the estimated market segmentation by launch vehicle; (5) summary of the estimated market segmentation by user type; (6) details of the STS market forecast; (7) summary of transponder trends; (8) model overview by mission category; and (9) detailed mission models. All known non-NASA, non-DOD reimbursable payloads forecast to be flown by non-Soviet-block countries are included in this model with the exception of Spacelab payloads and small self contained payloads. Certain DOD-sponsored or cosponsored payloads are included if they are reimbursable launches.

  12. CSTEM User Manual

    NASA Technical Reports Server (NTRS)

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  13. ASSIST user manual

    NASA Technical Reports Server (NTRS)

    Johnson, Sally C.; Boerschlein, David P.

    1995-01-01

    Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all the states and transitions in a complex system model can be devastatingly tedious and error prone. The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) computer program allows the user to describe the semi-Markov model in a high-level language. Instead of listing the individual model states, the user specifies the rules governing the behavior of the system, and these are used to generate the model automatically. A few statements in the abstract language can describe a very large, complex model. Because no assumptions are made about the system being modeled, ASSIST can be used to generate models describing the behavior of any system. The ASSIST program and its input language are described and illustrated by examples.

  14. RELAP-7 User's Guide

    SciTech Connect

    Zhang, Hongbin; Zhao, Haihua; Zou, Ling; Andrs, David; Berry, Ray Alden; Martineau, Richard Charles

    2014-12-01

    The document contains a user's guide on how to run the RELAP-7 code. The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory. RELAP-7 will become the main reactor systems simulation toolkit for the LWRS (Light Water Reactor Sustainability) program’s RISMC (Risk Informed Safety Margin Characterization) effort and the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 is written with object oriented programming language C++. A number of example problems and their associated input files are presented in this document to guide users to run the RELAP-7 code starting with simple pipe problems to problems with increasing complexity.

  15. Trilinos users guide.

    SciTech Connect

    Willenbring, James M.; Heroux, Michael Allen

    2003-08-01

    The Trilinos Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries. A new software capability is introduced into Trilinos as a package. A Trilinos package is an integral unit usually developed by a small team of experts in a particular algorithms area such as algebraic preconditioners, nonlinear solvers, etc. The Trilinos Users Guide is a resource for new and existing Trilinos users. Topics covered include how to configure and build Trilinos, what is required to integrate an existing package into Trilinos and examples of how those requirements can be met, as well as what tools and services are available to Trilinos packages. Also discussed are some common practices that are followed by many Trilinos package developers. Finally, a snapshot of current Trilinos packages and their interoperability status is provided, along with a list of supported computer platforms.

  16. Sandia NLVEabq

    2005-03-07

    Sandia NLVEabq is a FORTRAN subroutine that defines a user supplied material model for the ABAQUS commercial finite element code. It must be compiled and linked with the ABAQUS libraries under the user supplied subroutine option of the ABAQUS executable script. The subroutine is an implementation of Sandia National Laboratories nonlinear viscoelastic material model that is used to analyze the thermomechanicat behavior of polymers. It is thermodynamically consistent, incorporates finite strains and is applicable tomore » isotropic materials. The model is capable of predicting such diverse phenomena as stress relaxation, yielding, physical aging, thermal straining and enthalpy relaxation under arbitrary thermal and mechanical loading histories. This subroutine enables the ABAQUS finite element code to be sued for analyzing the performance of samples and structures that are made from polymers,« less

  17. Magnetic tape user guide

    NASA Technical Reports Server (NTRS)

    Evans, A. B.; Lee, L. L.

    1985-01-01

    This User Guide provides a general introduction to the structure, use, and handling of magnetic tapes at Langley Research Center (LaRC). The topics covered are tape terminology, physical characteristics, error prevention and detection, and creating, using, and maintaining tapes. Supplementary documentation is referenced where it might be helpful. The documentation is included for the tape utility programs, BLOCK, UNBLOCK, and TAPEDMP, which are available at the Central Scientific Computing Complex at LaRC.

  18. IAC user manual

    NASA Technical Reports Server (NTRS)

    Vos, R. G.; Beste, D. L.; Gregg, J.

    1984-01-01

    The User Manual for the Integrated Analysis Capability (IAC) Level 1 system is presented. The IAC system currently supports the thermal, structures, controls and system dynamics technologies, and its development is influenced by the requirements for design/analysis of large space systems. The system has many features which make it applicable to general problems in engineering, and to management of data and software. Information includes basic IAC operation, executive commands, modules, solution paths, data organization and storage, IAC utilities, and module implementation.

  19. ACARA user's manual

    NASA Technical Reports Server (NTRS)

    Stalnaker, Dale K.

    1993-01-01

    ACARA (Availability, Cost, and Resource Allocation) is a computer program which analyzes system availability, lifecycle cost (LCC), and resupply scheduling using Monte Carlo analysis to simulate component failure and replacement. This manual was written to: (1) explain how to prepare and enter input data for use in ACARA; (2) explain the user interface, menus, input screens, and input tables; (3) explain the algorithms used in the program; and (4) explain each table and chart in the output.

  20. PISCES 2 users manual

    NASA Technical Reports Server (NTRS)

    Pratt, Terrence W.

    1987-01-01

    PISCES 2 is a programming environment and set of extensions to Fortran 77 for parallel programming. It is intended to provide a basis for writing programs for scientific and engineering applications on parallel computers in a way that is relatively independent of the particular details of the underlying computer architecture. This user's manual provides a complete description of the PISCES 2 system as it is currently implemented on the 20 processor Flexible FLEX/32 at NASA Langley Research Center.

  1. Salinas - User's Notes

    SciTech Connect

    ALVIN,KENNETH F.; BHARDWAJ,MANOJ K.; DRIESSEN,BRIAN; REESE,GARTH M.; SEGALMAN,DANIEL J.

    1999-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Salinas. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

  2. AVRAM user's manual

    SciTech Connect

    McGrady, P.W.

    1988-02-01

    This document details the use of the reliability code for the Atomic Vapor Laser Isotope Separation (AVLIS) project. This code was designed by Tom Anklam and John Harris. In late 1984 Patrick McGrady and Elena Koontz of C and TD/TA were assigned the task of improving the code and converting it for use on the DEC-10 system. In early 1986, Patric McGrady converted it to the CRAY. The AVRAM code is divided into distinct parts (often referred to as programs in this document). There is a COSMOS file that controls the execution of the FORTRAN code and controls the naming of output datasets and the deletion of temporary datasets created by the code. The FORTRAN code consists of a main program as a driver and of three main subroutines: EDIT, PARAM, and AVRAM. The EDIT program allows the user to create a new user defined system or add to an existing system or to change certain parameters. The PARAM program allows the user to alter system parameters and to select options such as economics run, criticality analysis or sensitivity studies. The AVRAM program does a reliability analysis of the system.

  3. Heating 7. 2 user's manual

    SciTech Connect

    Childs, K.W.

    1993-02-01

    HEATING is a general-purpose conduction heat transfer program written in Fortran 77. HEATING can solve steady-state and/or transient heat conduction problems in one-, two-, or three-dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may also be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heat-generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-environment or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General gray-body radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING uses a runtime memory allocation scheme to avoid having to recompile to match memory requirements for each specific problem. HEATING utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution, and conjugate gradient. Transient problems may be solved using any one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method. The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  4. HEATING 7. 1 user's manual

    SciTech Connect

    Childs, K.W.

    1991-07-01

    HEATING is a FORTRAN program designed to solve steady-state and/or transient heat conduction problems in one-, two-, or three- dimensional Cartesian, cylindrical, or spherical coordinates. A model may include multiple materials, and the thermal conductivity, density, and specific heat of each material may be both time- and temperature-dependent. The thermal conductivity may be anisotropic. Materials may undergo change of phase. Thermal properties of materials may be input or may be extracted from a material properties library. Heating generation rates may be dependent on time, temperature, and position, and boundary temperatures may be time- and position-dependent. The boundary conditions, which may be surface-to-boundary or surface-to-surface, may be specified temperatures or any combination of prescribed heat flux, forced convection, natural convection, and radiation. The boundary condition parameters may be time- and/or temperature-dependent. General graybody radiation problems may be modeled with user-defined factors for radiant exchange. The mesh spacing may be variable along each axis. HEATING is variably dimensioned and utilizes free-form input. Three steady-state solution techniques are available: point-successive-overrelaxation iterative method with extrapolation, direct-solution (for one-dimensional or two-dimensional problems), and conjugate gradient. Transient problems may be solved using one of several finite-difference schemes: Crank-Nicolson implicit, Classical Implicit Procedure (CIP), Classical Explicit Procedure (CEP), or Levy explicit method (which for some circumstances allows a time step greater than the CEP stability criterion). The solution of the system of equations arising from the implicit techniques is accomplished by point-successive-overrelaxation iteration and includes procedures to estimate the optimum acceleration parameter.

  5. User Instructions for Online Catalogs in ARL Libraries. Kit 93.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This collection of library documents which provide instructions for users of online public access catalogs in member libraries of the Association of Research Libraries (ARL) contains: (1) a set of enhanced instructions for library users of Geac, a commercial online circulation system at the University of Arizona; (2) sets of materials of…

  6. Linking Library Users: A Culture Change in Librarianship.

    ERIC Educational Resources Information Center

    Koenig, Michael E. D.

    1990-01-01

    Discussion of library information systems focuses on the idea of including user-supplied data (USD) in libraries' automated catalogs. Hypertext is mentioned, the information explosion and the ability to selectively retrieve information is considered, and the value of user input in evaluating the relevance of material is discussed. (12 references)…

  7. Staradmin -- Starlink User Database Maintainer

    NASA Astrophysics Data System (ADS)

    Fish, Adrian

    The subject of this SSN is a utility called STARADMIN. This utility allows the system administrator to build and maintain a Starlink User Database (UDB). The principal source of information for each user is a text file, named after their username. The content of each file is a list consisting of one keyword followed by the relevant user data per line. These user database files reside in a single directory. The STARADMIN program is used to manipulate these user data files and automatically generate user summary lists.

  8. Managing End User Computing for Users with Disabilities.

    ERIC Educational Resources Information Center

    General Services Administration, Washington, DC. Clearinghouse on Computer Accommodation.

    This handbook presents guidelines to assist federal Information Resources Managers in applying computer and related information technology to accommodate users with disabilities. It discusses managing the end user environment, assessing accommodation requirements, and providing end user tools and support. The major portion of the document consists…

  9. User Interface Program for secure electronic tags

    SciTech Connect

    Cai, Y.; Koehl, E.R.; Carlson, R.D.; Raptis, A.C.

    1995-05-01

    This report summarizes and documents the efforts of Argonne National Laboratory (ANL) in developing a secure tag communication user interface program comprising a tag monitor and a communication tool. This program can perform the same functions as the software that was developed at the Lawrence Livermore National Laboratory (LLNL), but it is enhanced with a user-friendly screen. It represents the first step in updating the TRANSCOM Tracking System (TRANSCOM) by incorporating a tag communication screen menu into the main menu of the TRANSCOM user program. A working version of TRANSCOM, enhanced with ANL secure-tag graphics, will strongly support the Department of Energy Warhead Dismantlement/Special Nuclear Materials Control initiatives. It will allow commercial satellite tracking of the movements and operational activities of treaty-limited items and transportation vehicles throughout Europe and the former USSR, as well as the continental US.

  10. Long Duration Exposure Facility Mini-Data Base User`s Guide: Macintosh version. (Diskette)

    SciTech Connect

    Bohnhoff-Hlavacek, G.; Pippin, H.G.; Dursch, H.W.

    1995-04-01

    One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview, including spacecraft design guidelines and space environmental effects. Compiling the information into an easily accessible data base format, and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1981. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples from the data base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.

  11. Designing visual displays and system models for safe reactor operations based on the user`s perspective of the system

    SciTech Connect

    Brown-VanHoozer, S.A.

    1995-12-31

    Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations related to reactor operations. They do not take into account the differences in user information processing behavior and how these behaviors may affect individual and team performance when accessing visual displays or utilizing system models in process and control room areas. Unfortunately, by ignoring the importance of the integration of the user interface at the information process level, the result can be sub-optimization and inherently error- and failure-prone systems. Therefore, to minimize or eliminate failures in human-interactive systems, it is essential that the designers understand how each user`s processing characteristics affects how the user gathers information, and how the user communicates the information to the designer and other users. A different type of approach in achieving this understanding is Neuro Linguistic Programming (NLP). The material presented in this paper is based on two studies involving the design of visual displays, NLP, and the user`s perspective model of a reactor system. The studies involve the methodology known as NLP, and its use in expanding design choices from the user`s ``model of the world,`` in the areas of virtual reality, workstation design, team structure, decision and learning style patterns, safety operations, pattern recognition, and much, much more.

  12. User Program Performance Monitor

    1983-09-30

    PROGLOOK makes it possible to monitor the execution of virtually any OS/MVT or OS/VS2 Release 1.6 load module. The main reason for using PROGLOOK is to find out which portions of a code use most of the CPU time so that those parts of the program can be rewritten to reduce CPU time. For large production programs, users have typically found it possible to reduce CPU time by 10 to 30 percent without changing themore » program''s function.« less

  13. The SYSGEN user package

    NASA Technical Reports Server (NTRS)

    Carlson, C. R.

    1981-01-01

    The user documentation of the SYSGEN model and its links with other simulations is described. The SYSGEN is a production costing and reliability model of electric utility systems. Hydroelectric, storage, and time dependent generating units are modeled in addition to conventional generating plants. Input variables, modeling options, output variables, and reports formats are explained. SYSGEN also can be run interactively by using a program called FEPS (Front End Program for SYSGEN). A format for SYSGEN input variables which is designed for use with FEPS is presented.

  14. User interface concerns

    NASA Technical Reports Server (NTRS)

    Redhed, D. D.

    1978-01-01

    Three possible goals for the Numerical Aerodynamic Simulation Facility (NASF) are: (1) a computational fluid dynamics (as opposed to aerodynamics) algorithm development tool; (2) a specialized research laboratory facility for nearly intractable aerodynamics problems that industry encounters; and (3) a facility for industry to use in its normal aerodynamics design work that requires high computing rates. The central system issue for industry use of such a computer is the quality of the user interface as implemented in some kind of a front end to the vector processor.

  15. SHAFT79 user's manual

    SciTech Connect

    Pruess, K.; Schroeder, R.C.

    1980-03-01

    SHAFT79 (Simultaneous Heat And Fluid Transport) is an integrated finite difference program for computing two-phase non-isothermal flow in porous media. The principal application for which SHAFT79 is designed is in geothermal reservoir simulation. SHAFT79 solves the same equations as an earlier version, called SHAFT78, but uses much more efficient mathematical and numerical methods. The present SHAFT79 user's manual gives a brief account of equations and numerical methods and then describes in detail how to set up input decks for running the program. The application of SHAFT79 is illustrated by means of a few sample problems. (MHR)

  16. User and technical documentation

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The program LP1 calculates outbound and return trajectories between low earth orbit (LEO) and libration point no. 1 (L1). Libration points (LP) are defined as locations in space that orbit the Earth such that they are always stationary with respect to the Earth-Moon line. L1 is located behind the Moon such that the pull of the Earth and Moon together just cancel the centrifugal acceleration associated with the libration point's orbit. The input required from the user to define the flight is described. The contents of the six reports produced as outputs are presented. Also included are the instructions needed to execute the program.

  17. XTV users guide

    SciTech Connect

    Dearing, J.F.; Johns, R.C.

    1996-09-01

    XTV is an X-Windows based Graphical User Interface for viewing results of Transient Reactor Analysis Code (TRAC) calculations. It provides static and animated color mapped visualizations of both thermal-hydraulic and heat conduction components in a TRAC model of a nuclear power plant, as well as both on-screen and hard copy two-dimensional plot capabilities. XTV is the successor to TRAP, the former TRAC postprocessor using the proprietary DISSPLA graphics library. This manual describes Version 2.0, which requires TRAC version 5.4.20 or later for full visualization capabilities.

  18. XMGR5 users manual

    SciTech Connect

    Jones, K.R.; Fisher, J.E.

    1997-03-01

    ACE/gr is XY plotting tool for workstations or X-terminals using X. A few of its features are: User defined scaling, tick marks, labels, symbols, line styles, colors. Batch mode for unattended plotting. Read and write parameters used during a session. Polynomial regression, splines, running averages, DFT/FFT, cross/auto-correlation. Hardcopy support for PostScript, HP-GL, and FrameMaker.mif format. While ACE/gr has a convenient point-and-click interface, most parameter settings and operations are available through a command line interface (found in Files/Commands).

  19. Distributed user services for supercomputers

    NASA Technical Reports Server (NTRS)

    Sowizral, Henry A.

    1989-01-01

    User-service operations at supercomputer facilities are examined. The question is whether a single, possibly distributed, user-services organization could be shared by NASA's supercomputer sites in support of a diverse, geographically dispersed, user community. A possible structure for such an organization is identified as well as some of the technologies needed in operating such an organization.

  20. User computer system pilot project

    SciTech Connect

    Eimutis, E.C.

    1989-09-06

    The User Computer System (UCS) is a general purpose unclassified, nonproduction system for Mound users. The UCS pilot project was successfully completed, and the system currently has more than 250 users. Over 100 tables were installed on the UCS for use by subscribers, including tables containing data on employees, budgets, and purchasing. In addition, a UCS training course was developed and implemented.

  1. BLOCKAGE 2.5 user`s manual

    SciTech Connect

    Rao, D.V.; Brideau, J.; Shaffer, C.; Souto, F.; Bernahl, W.

    1996-12-01

    The BLOCKAGE 2.5 code described in this User`s Manual was developed by the US Nuclear Regulatory Commission (NRC) as a tool to evaluate licensee compliance with NRC Bulletin 96-03, ``Potential Plugging of Emergency Core Cooling Suction Strainers by Debris in Boiling Water Reactors.`` As such, BLOCKAGE 2.5 provides a generalized framework into which a user can input plant-specific and insulation-specific data for performing analyses in accordance with Regulatory Guide 1.82, Rev. 2. This user`s manual describes the capabilities of BLOCKAGE 2.5 along with a description of the graphics user`s interface provided for data entry. Each input/output dialog is described in detail along with special considerations related to developing and executing BLOCKAGE. Also, several sample problems are provided such that user can easily modify them to suit a particular plant of interest. The models used in BLOCKAGE 2.5 and their validation are presented in the accompanying NUREG/CR-6371. The BLOCKAGE models were designed to be parametric in nature, allowing the user flexibility to examine the impact of several modeling assumptions and to conduct sensitivity analyses. As a result, BLOCKAGE 2.5 results are known to be very sensitive to the user provided input. It is therefore strongly recommended that users become thoroughly familiar with BLOCKAGE models and their limitations as described in NUREG/CR-6224.

  2. The Third Annual NASA Science Internet User Working Group Conference

    NASA Technical Reports Server (NTRS)

    Lev, Brian S. (Editor); Gary, J. Patrick (Editor)

    1993-01-01

    The NASA Science Internet (NSI) User Support Office (USO) sponsored the Third Annual NSI User Working Group (NSIUWG) Conference March 30 through April 3, 1992, in Greenbelt, MD. Approximately 130 NSI users attended to learn more about the NSI, hear from projects which use NSI, and receive updates about new networking technologies and services. This report contains material relevant to the conference; copies of the agenda, meeting summaries, presentations, and descriptions of exhibitors. Plenary sessions featured a variety of speakers, including NSI project management, scientists, and NSI user project managers whose projects and applications effectively use NSI, and notable citizens of the larger Internet community. The conference also included exhibits of advanced networking applications; tutorials on internetworking, computer security, and networking technologies; and user subgroup meetings on the future direction of the conference, networking, and user services and applications.

  3. Electronic Commerce user manual

    SciTech Connect

    Not Available

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  4. Electronic Commerce user manual

    SciTech Connect

    Not Available

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  5. User interface enhancement report

    NASA Technical Reports Server (NTRS)

    Badler, N. I.; Gangel, J.; Shields, G.; Fala, G.

    1985-01-01

    The existing user interfaces to TEMPUS, Plaid, and other systems in the OSDS are fundamentally based on only two modes of communication: alphanumeric commands or data input and grapical interaction. The latter are especially suited to the types of interaction necessary for creating workstation objects with BUILD and with performing body positioning in TEMPUS. Looking toward the future application of TEMPUS, however, the long-term goals of OSDS will include the analysis of extensive tasks in space involving one or more individuals working in concert over a period of time. In this context, the TEMPUS body positioning capability, though extremely useful in creating and validating a small number of particular body positions, will become somewhat tedious to use. The macro facility helps somewhat, since frequently used positions may be easily applied by executing a stored macro. The difference between body positioning and task execution, though subtle, is important. In the case of task execution, the important information at the user's level is what actions are to be performed rather than how the actions are performed. Viewed slightly differently, the what is constant over a set of individuals though the how may vary.

  6. The LATDYN user's manual

    NASA Technical Reports Server (NTRS)

    Housner, J. M.; Mcgowan, P. E.; Abrahamson, A. L.; Powell, M. G.

    1986-01-01

    The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

  7. User and technical documentation

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The program LIBRATE calculates velocities for trajectories from low earth orbit (LEO) to four of the five libration points (L2, L3, L4, and L5), and from low lunar orbit (LLO) to libration points L1 and L2. The flight to be analyzed departs from a circular orbit of any altitude and inclination about the Earth or Moon and finishes in a circular orbit about the Earth at the desired libration point within a specified flight time. This program produces a matrix of the delta V's needed to complete the desired flight. The user specifies the departure orbit, and the maximum flight time. A matrix is then developed with 10 inclinations, ranging from 0 to 90 degrees, forming the columns, and 19 possible flight times, ranging from the flight time (input) to 36 hours less than the input value, in decrements of 2 hours, forming the rows. This matrix is presented in three different reports including the total delta V's, and both of the delta V components discussed. The input required from the user to define the flight is discussed. The contents of the three reports that are produced as outputs are also described. The instructions are also included which are needed to execute the program.

  8. TRLAN User Guide

    SciTech Connect

    Wu, Kesheng; Simon, H.

    1999-03-09

    TRLAN is a program designed to find a small number of extreme eigenvalues and their corresponding eigenvectors of a real symmetric matrix. Denote the matrix as A, the eigenvalue as {lambda}, and the corresponding eigenvector as x, they are defined by the following equation, Ax = {lambda}x. There are a number of different implementations of the Lanczos algorithm available. Why another one? Our main motivation is to develop a specialized version that only target the case where one wants both eigenvalues and eigenvectors of a large real symmetric eigenvalue problems that can not use the shift-and-invert scheme. In this case the standard non-restarted Lanczos algorithm requires one to store a large number of Lanczos vectors which can cause storage problem and make each iteration of the method very expensive. The underlying algorithm of TRLAN is a dynamic thick-restart Lanczos algorithm. Like all restarted methods, the user can choose how many vectors can be generated at once. Typically, th e user chooses a moderate size so that all Lanczos vectors can be stored in core. This allows the restarted methods to execute efficiently. This implementation of the thick-restart Lanczos method also uses the latest restarting technique, it is very effective in reducing the time required to compute a desired solutions compared to similar restarted Lanczos schemes, e.g., ARPACK.

  9. Photovoltaics information user study

    SciTech Connect

    Belew, W.W.; Wood, B.L.; Marie, T.L.; Reinhardt, C.L.

    1980-10-01

    The results of a series of telephone interviews with groups of users of information on photovoltaics (PV) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. The report is 1 of 10 discussing study results. The overall study provides baseline data about information needs in the solar community. It covers these technological areas: photovoltaics, passive solar heating and cooling, active solar heating and cooling, biomass energy, solar thermal electric power, solar industrial and agricultural process heat, wind energy, ocean energy, and advanced energy storage. An earlier study identified the information user groups in the solar community and the priority (to accelerate solar energy commercialization) of getting information to each group. In the current study only high-priority groups were examined. Results from seven PV groups respondents are analyzed in this report: DOE-Funded Researchers, Non-DOE-Funded Researchers, Researchers Working for Manufacturers, Representatives of Other Manufacturers, Representatives of Utilities, Electric Power Engineers, and Educators.

  10. ARDS User Manual

    NASA Technical Reports Server (NTRS)

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  11. Modeling of metal cutting as purposeful fracture of work material

    NASA Astrophysics Data System (ADS)

    Abushawashi, Yalla Mussa

    parameters needed in the model, a novel double-notched specimen is developed. This new specimen can cover a wide range of stress triaxiality from -0.25 to 0.6. For steel AISI1045, the plastic strain at damage initiation decreased from 0.81 to 0.17 in this range. The developed model was implemented in the FEM package ABAQUS as a user material model and used in the investigation of orthogonal metal cutting. A number of practical machining cases were investigated, including the effect of the cutting tool rake angle, cutting feed, tool-chip interface friction, and chip breaking tool features. The model predictions for these cases agreed with the trends known in metal cutting. This is a significant improvement from the published works where the model predictions often yielded different trends from the experimental results. Different from the common practice to report the stress, strain and temperature plots, this work examined the stress triaxiality state in the primary deformation zone. It shows that the influence of the above machining parameters on the stress triaxiality correlated to the cutting force. A parameter change that resulted in an increase in the stress triaxiality reduced the cutting force, i.e. reducing the strain energy to fracture, and vice versa. This work demonstrates that metal cutting should be considered as the purposefully fracture of work material. A machining process can be optimized by minimizing the energy of plastic deformation of the work material in its transformation into the chip.

  12. A user's Perspective on Software

    SciTech Connect

    Isadoro T. Carlino

    2006-10-24

    The user is often the most overlooked component of control system design. At Jefferson Lab the control system is almost entirely digital in nature, with little feedback except that which is deliberately designed into the control system. In the complex control room environment a good design can enhance the user's abilities to preform good science. A bad design can leave the user frustrated and contribute significantly to down time, when science is not being done. Key points of use and design from the user's perspective are discussed, along with some techniques which have been adopted at Jefferson Lab to improve the user experience and produce better, more usable software.

  13. Users, End-Users, and End-User Searchers of Online Information: A Historical Overview.

    ERIC Educational Resources Information Center

    Farber, Miriam; Shoham, Snunith

    2002-01-01

    Discusses the changing relationship between information professionals (vendors, database producers, and searchers) and end users during the last three decades. Examines the concept of the end user, including professionals; libraries; end user searchers; DIALOG and BRS; ease of use issues; search intermediaries; menu-driven systems; and CD-ROM…

  14. Rivet user manual

    NASA Astrophysics Data System (ADS)

    Buckley, Andy; Butterworth, Jonathan; Grellscheid, David; Hoeth, Hendrik; Lönnblad, Leif; Monk, James; Schulz, Holger; Siegert, Frank

    2013-12-01

    This is the manual and user guide for the Rivet system for the validation and tuning of Monte Carlo event generators. As well as the core Rivet library, this manual describes the usage of the rivet program and the AGILe generator interface library. The depth and level of description is chosen for users of the system, starting with the basics of using validation code written by others, and then covering sufficient details to write new Rivet analyses and calculational components. Catalogue identifier: AEPS_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPS_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 571126 No. of bytes in distributed program, including test data, etc.: 4717522 Distribution format: tar.gz Programming language: C++, Python. Computer: PC running Linux, Mac. Operating system: Linux, Mac OS. RAM: 20 MB Classification: 11.9, 11.2. External routines: HepMC (https://savannah.cern.ch/projects/hepmc/), GSL (http://www.gnu.org/software/gsl/manual/gsl-ref.html), FastJet (http://fastjet.fr/), Python (http://www.python.org/), Swig (http://www.swig.org/), Boost (http://www.boostsoftware.com/), YAML (http://www.yaml.org/spec/1.2/spec.html) Nature of problem: Experimental measurements from high-energy particle colliders should be defined and stored in a general framework such that it is simple to compare theory predictions to them. Rivet is such a framework, and contains at the same time a large collection of existing measurements. Solution method: Rivet is based on HepMC events, a standardised output format provided by many theory simulation tools. Events are processed by Rivet to generate histograms for the requested list of analyses, incorporating all experimental phase space cuts and histogram definitions. Restrictions: Cannot calculate

  15. Understanding Palladium Acetate from a User Perspective.

    PubMed

    Carole, William A; Colacot, Thomas J

    2016-06-01

    The behavior of palladium acetate is reviewed with respect to its synthesis, characterization, structure (in both solution and solid state), and activation pathways. In addition, comparisons of catalytic activities between pure palladium acetate and two common byproducts, Pd3 (OAc)5 (NO2 ) and polymeric [Pd(OAc)2 ]n , typically present in commercially available material are reviewed. Hence, this minireview serves as a concise guide for the users of palladium acetate from both academia and industry. PMID:27125630

  16. Development of a Pressure-Dependent Constitutive Model with Combined Multilinear Kinematic and Isotropic Hardening

    NASA Technical Reports Server (NTRS)

    Allen Phillip A.; Wilson, Christopher D.

    2003-01-01

    The development of a pressure-dependent constitutive model with combined multilinear kinematic and isotropic hardening is presented. The constitutive model is developed using the ABAQUS user material subroutine (UMAT). First the pressure-dependent plasticity model is derived. Following this, the combined bilinear and combined multilinear hardening equations are developed for von Mises plasticity theory. The hardening rule equations are then modified to include pressure dependency. The method for implementing the new constitutive model into ABAQUS is given.

  17. SWITCH user's manual

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The planning program, SWITCH, and its surrounding changed-goal-replanning program, Runaround, are described. The evolution of SWITCH and Runaround from an earlier planner, DEVISER, is recounted. SWITCH's plan representation, and its process of building a plan by backward chaining with strict chronological backtracking, are described. A guide for writing knowledge base files is provided, as are narrative guides for installing the program, running it, and interacting with it while it is running. Some utility functions are documented. For the sake of completeness, a narrative guide to the experimental discrepancy-replanning feature is provided. Appendices contain knowledge base files for a blocksworld domain, and a DRIBBLE file illustrating the output from, and user interaction with, the program in that domain.

  18. Instructions for minipill users.

    PubMed

    Reese, M; Hatcher, R A

    1985-01-01

    Guidelines are provided for women who use minipills. Minipills are low dose, progestin only oral contraceptives (OC), which are frequently prescribed for women who 1) experience estrogen related side effects if they take combined OCs; 2) are 35 years of age or older; 3) are 30 years of age or aver and smoke; 4) have a history of headaches, hypertension, or varicose veins; 5) desire immediate postpartum protection; or 6) are lactating. Minipills prevent pregnancy by inhibiting ovulation and implantation and by making the cervical mucus more impervious to sperm penetration. Minipills can be effective if they are used properly. Women who take minipills should be advised to carefully read and follow the instructions provided in the OC packet, initiate pill taking on the 1st day of menstrual bleeding, and take 1 pill every day without and breaks. A backup method should be used during the 1st month and subsequently, during each midcycle phase. If a woman misses 1 pill, she should immediately, upon remembering, take a pill, take her next day's pill at regular time, and use a backup method until menstruation reoccurs. If a woman misses 2 pills, she should immediately, upon remembering, take 2 pills, take 2 pills the following day, and use a backup method until menstruation begins. Women should be advised that many minipill users experience irregular menstural cycles, including amenorrhea and spotting between periods. If menstruation is delayed for 45 days, a pregnancy test is advisable. Women should be advised to immediately seek medical attention if they experience severe chest pain, shortness breath, severe headaches, vision problems, or severe leg pain. Minipill users should let their clinicians know if they experience and changes in mood or sexual drive. These problems can frequently be avoided by switching to another brand of minipills. PMID:12279915

  19. Prosthesis Material

    NASA Technical Reports Server (NTRS)

    1995-01-01

    In this photograph, Sandra Rossi user her NASA-developed prosthesis for the first time. Derived from foam insulation technology used to protect the Space Shuttle External Tank from excessive heat, FAB/CAD, a subsidiary of the Harshberger Prosthetic and Orthotic Center, utilized the technology to replace the heavy, fragile plaster they used to produce master molds for prosthetics. The new material was lighter, cheaper and easier to manufacture than plaster, resulting in lower costs to the customer.

  20. Anaerobic digestion analysis model: User`s manual

    SciTech Connect

    Ruth, M.; Landucci, R.

    1994-08-01

    The Anaerobic Digestion Analysis Model (ADAM) has been developed to assist investigators in performing preliminary economic analyses of anaerobic digestion processes. The model, which runs under Microsoft Excel{trademark}, is capable of estimating the economic performance of several different waste digestion process configurations that are defined by the user through a series of option selections. The model can be used to predict required feedstock tipping fees, product selling prices, utility rates, and raw material unit costs. The model is intended to be used as a tool to perform preliminary economic estimates that could be used to carry out simple screening analyses. The model`s current parameters are based on engineering judgments and are not reflective of any existing process; therefore, they should be carefully evaluated and modified if necessary to reflect the process under consideration. The accuracy and level of uncertainty of the estimated capital investment and operating costs are dependent on the accuracy and level of uncertainty of the model`s input parameters. The underlying methodology is capable of producing results accurate to within {+-} 30% of actual costs.

  1. TAILSIM Users Guide

    NASA Technical Reports Server (NTRS)

    Hiltner, Dale W.

    2000-01-01

    The TAILSIM program uses a 4th order Runge-Kutta method to integrate the standard aircraft equations-of-motion (EOM). The EOM determine three translational and three rotational accelerations about the aircraft's body axis reference system. The forces and moments that drive the EOM are determined from aerodynamic coefficients, dynamic derivatives, and control inputs. Values for these terms are determined from linear interpolation of tables that are a function of parameters such as angle-of-attack and surface deflections. Buildup equations combine these terms and dimensionalize them to generate the driving total forces and moments. Features that make TAILSIM applicable to studies of tailplane stall include modeling of the reversible control System, modeling of the pilot performing a load factor and/or airspeed command task, and modeling of vertical gusts. The reversible control system dynamics can be described as two hinged masses connected by a spring. resulting in a fifth order system. The pilot model is a standard form of lead-lag with a time delay applied to an integrated pitch rate and/or airspeed error feedback. The time delay is implemented by a Pade approximation, while the commanded pitch rate is determined by a commanded load factor. Vertical gust inputs include a single 1-cosine gust and a continuous NASA Dryden gust model. These dynamic models. coupled with the use of a nonlinear database, allow the tailplane stall characteristics, elevator response, and resulting aircraft response, to be modeled. A useful output capability of the TAILSIM program is the ability to display multiple post-run plot pages to allow a quick assessment of the time history response. There are 16 plot pages currently available to the user. Each plot page displays 9 parameters. Each parameter can also be displayed individually. on a one plot-per-page format. For a more refined display of the results the program can also create files of tabulated data. which can then be used by other

  2. DIRAC: Secure web user interface

    NASA Astrophysics Data System (ADS)

    Casajus Ramo, A.; Sapunov, M.

    2010-04-01

    Traditionally the interaction between users and the Grid is done with command line tools. However, these tools are difficult to use by non-expert users providing minimal help and generating outputs not always easy to understand especially in case of errors. Graphical User Interfaces are typically limited to providing access to the monitoring or accounting information and concentrate on some particular aspects failing to cover the full spectrum of grid control tasks. To make the Grid more user friendly more complete graphical interfaces are needed. Within the DIRAC project we have attempted to construct a Web based User Interface that provides means not only for monitoring the system behavior but also allows to steer the main user activities on the grid. Using DIRAC's web interface a user can easily track jobs and data. It provides access to job information and allows performing actions on jobs such as killing or deleting. Data managers can define and monitor file transfer activity as well as check requests set by jobs. Production managers can define and follow large data productions and react if necessary by stopping or starting them. The Web Portal is build following all the grid security standards and using modern Web 2.0 technologies which allow to achieve the user experience similar to the desktop applications. Details of the DIRAC Web Portal architecture and User Interface will be presented and discussed.

  3. Traj_opt User's Guide

    NASA Technical Reports Server (NTRS)

    Saunders, David A.

    2005-01-01

    Trajectory optimization program Traj_opt was developed at Ames Research Center to help assess the potential benefits of ultrahigh temperature ceramic materials applied to reusable space vehicles with sharp noses and wing leading edges. Traj_opt loosely couples the Ames three-degrees-of-freedom trajectory package Traj (see NASA-TM-2004-212847) with the SNOPT optimization package (Stanford University Technical Report SOL 98-1). Traj_opt version January 22, 2003 is covered by this user guide. The program has been applied extensively to entry and ascent abort trajectory calculations for sharp and blunt crew transfer vehicles. The main optimization variables are control points for the angle of attack and bank angle time histories. No propulsion options are provided, but numerous objective functions may be specified and the nonlinear constraints implemented include a distributed surface heating constraint capability. Aero-capture calculations are also treated with an option to minimize orbital eccentricity at apoapsis. Traj_opt runs efficiently on a single processor, using forward or central differences for the gradient calculations. Results may be displayed conveniently with Gnuplot scripts. Control files recommended for five standard reentry and ascent abort trajectories are included along with detailed descriptions of the inputs and outputs.

  4. PROFILE user's guide

    NASA Technical Reports Server (NTRS)

    Collins, L.; Saunders, D.

    1986-01-01

    User information for program PROFILE, an aerodynamics design utility for refining, plotting, and tabulating airfoil profiles is provided. The theory and implementation details for two of the more complex options are also presented. These are the REFINE option, for smoothing curvature in selected regions while retaining or seeking some specified thickness ratio, and the OPTIMIZE option, which seeks a specified curvature distribution. REFINE uses linear techniques to manipulate ordinates via the central difference approximation to second derivatives, while OPTIMIZE works directly with curvature using nonlinear least squares techniques. Use of programs QPLOT and BPLOT is also described, since all of the plots provided by PROFILE (airfoil coordinates, curvature distributions) are achieved via the general purpose QPLOT utility. BPLOT illustrates (again, via QPLOT) the shape functions used by two of PROFILE's options. The programs were designed and implemented for the Applied Aerodynamics Branch at NASA Ames Research Center, Moffett Field, California, and written in FORTRAN and run on a VAX-11/780 under VMS.

  5. AMBER User's Manual

    SciTech Connect

    Vay, J.L.; Fawley, W.

    2000-11-08

    AMBER is a Particle-In-Cell (PIC) code which models the evolution of a representative slice of a relativistic electron beam in a linear accelerator. The beam is modeled as a steady flow and therefore no electromagnetic waves: all the fields (external and self-fields) are electrostatic and magnetostatic fields (for a complete description, see chapter 5). The possible elements describing the accelerator lattice are solenoids, accelerating gaps, pipes and apertures. Several kinds of beam distribution can be loaded: KV, gaussian, semi-gaussian, etc. Alternatively, the user can reconstruct (or load) a distribution from the output of another codefile, for example, an interface generating the beam distribution from output produced from EGUN or LSP codes is available as an option. This documentation first describes in detail the input files needed to run AMBER and the procedure to start the executable. The possible data files and graphical output are explained in the two following chapters. The last chapter describes the physics model and numerical techniques used. An example of input files and the result obtained with these inputs are also given in the Appendix.

  6. PREDICT User's Manual

    SciTech Connect

    YOUNG, LARRY W.; STURGIS, BEVERLY R.

    2002-07-01

    Sandia National Laboratories has developed a Near Real Time Range Safety Analysis Tool named PREDICT that is based upon a probabilistic range safety analysis process. Probabilistic calculations of risk may be used in place of the total containment of potentially hazardous debris during a missile launch operation. Impact probabilities are computed based upon probabilistic density functions, Monte Carlo trajectories of dispersion events, and missile failure scenarios. Impact probabilities are then coupled with current demographics (land populations, commercial and military ship traffic, and aircraft traffic) to produce expected casualty predictions for a particular launch window. Historically, these calculations required days of computer time to finalize. Sandia has developed a process that utilizes the IBM SP machines at the Maui High Performance Computing Center and at the Arctic Region Supercomputing Center to reduce the computation time from days to as little as an hour or two. This analysis tool then allows the Missile Flight Safety Officer to make launch decisions based on the latest information (winds, ship, and aircraft movements) utilizing an intelligent risk management approach. This report provides a user's manual for PREDICT version 3.3.

  7. NASTRAN: User's Experiences

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The application of NASTRAN to a wide variety of static and dynamic structural problems is discussed. The following topics are focused upon: (1) methods of analysis; (2) hydroelastic methods; (3) complete analysis of structures; (4) elements and material studies; (5) critical comparisons with other programs; and (6) pre- and post-processor operations.

  8. UCSB FEL user mode adaption project

    NASA Astrophysics Data System (ADS)

    Jaccarino, Vincent

    1992-04-01

    This research sponsored by the SDIO Biomedical and Materials Sciences FEL Program held the following objectives: Provide a facility in which in-house and outside user research in the materials and biological sciences can be carried out in the Far Infrared using-the unique properties of the UCSB electrostatic accelerator-driven FEL; Develop and implement new FEL concepts and FIR technology and encourage the transfer and application of this research; Train graduate students, post doctoral researchers and technical personnel in varied aspects of scientific user disciplines, FEL science and FIR technology in a cooperative, interdisciplinary environment. In summary, a free electron laser facility has been developed which is operational from 200 GHz, (6.6 cm exp -1), to 4.8 THz, (160 cm exp -1) tunable under computer control and able to deliver kilowatts of millimeter wave and far-infrared power. This facility has a well equipped user lab that has been used to perform ground breaking experiments in scientific areas as diverse as bio-physics. Nine graduate students and post doctoral researchers have been trained in the operation, use and application of these free-electron lasers.

  9. RADTRAN II user guide

    SciTech Connect

    Madsen, M M; Wilmot, E L; Taylor, J M

    1983-02-01

    RADTRAN II is a flexible analytical tool for calculating both the incident-free and accident impacts of transporting radioactive materials. The consequences from incident-free shipments are apportioned among eight population subgroups and can be calculated for several transport modes. The radiological accident risk (probability times consequence summed over all postulated accidents) is calculated in terms of early fatalities, early morbidities, latent cancer fatalities, genetic effects, and economic impacts. Groundshine, inhalation, direct exposure, resuspension, and cloudshine dose pathways are modeled to calculate the radiological health risks from accidents. Economic impacts are evaluated based on costs for emergency response, cleanup, evacuation, income loss, and land use. RADTRAN II can be applied to specific scenario evaluations (individual transport modes or specified combinations), to compare alternative modes or to evaluate generic radioactive material shipments. Unit-risk factors can easily be evaluated to aid in performing generic analyses when several options must be compared with the amount of travel as the only variable.

  10. SVX4 User's manual

    SciTech Connect

    Christofek, L.; Hanagaki, K.; Hoff, J.; Kreiger, B.; Rapidis, P.; Garcia-Sciveres, M.; Utes, M.; Weber, M.; Yarema, R.; Zimmerman, T.; /Fermilab

    2005-06-01

    We present and describe the operation of the SVX4 chip. The SVX4 is a custom 128-channel analog to digital converter chip used by D0 and CDF in Run IIb to read out their respective silicon strip detectors. Each channel consists of an integrator (Front-End device, or FE) and a digitize/readout section (Back-End device, or BE). The input to each channel is sampled and temporarily stored in its own storage capacitor. Upon receiving a trigger signal, the relevant pipeline cell is reserved. Subsequent signals cause reserved cells to be digitized by a 128 parallel channel Wilkinson type 8-bit ADC, and then readout in byte-serial mode with optional zero suppression (sparsification). Salient features include (1) operation in either D0 mode or CDF mode (CDF mode features ''dead timeless operation'' or continued acquisition during digitization and readout) with an additional mixed mode of operation, (2) adjustable, loadable control parameters, including the integrator bandwidth and ADC polarity (only one input charge polarity will be used for Run IIb, but this feature remains for diagnostic purposes), (3) sparsified readout with nearest neighbor logic, (4) built-in charge injection with the ability for external voltage overriding for testing and calibration, and (5) a channel mask that is used for either charge injection or for masking of channels with excessive DC current input during chip operation. This document is meant to familiarize the user with the functionality of the SVX4 and goes on to include specifications, pin outs, timings and electrical information. Additional information on the SVX4 can be found in Ref [1].

  11. Scientific customer needs - NASA user

    NASA Technical Reports Server (NTRS)

    Black, David C.

    1987-01-01

    Some requirements for scientific users of the Space Station are considered. The use of testbeds to evaluate design concepts for information systems, and for interfacing between designers and builders of systems is examined. The need for an information system that provides an effective interaction between ground-based users and their space-based equipment is discussed.

  12. Microfiche 1969 -- A User Survey.

    ERIC Educational Resources Information Center

    Wooster, Harold

    An informal survey of microfiche users was conducted by correspondence, resulting in over 300 letters. Industrial libraries led all others in their acceptance of fiche, with a ratio of 2:1 in favor. Half of the individual users despised fiche; 25% liked it with some reservations and 25% were strongly in favor. Half of those who liked fiche had…

  13. The TIMS Data User's Workshop

    NASA Technical Reports Server (NTRS)

    Kahle, Anne B. (Editor); Abbott, Elsa (Editor)

    1986-01-01

    A workshop was held to bring together all users of data from NASA's airborne Thermal Infrared Multispectral Scanner (TIMS). The purpose was to allow users to compare results, data processing algorithms, and problems encountered; to update the users on the latest instrument changes and idiosyncracies, including distribution of the TIMS investigation guide; to inform the users of the wide range of problems that are currently being tackled by other TIMS investigators; to explore ways to expand the user community; to discuss current areas where more basic research is required; and to discuss the future directions of NASA's thermal infrared remote sensing programs. Also discussed were: geology, land use, archeology; and data processing and noise research.

  14. Peak experiences of psilocybin users and non-users.

    PubMed

    Cummins, Christina; Lyke, Jennifer

    2013-01-01

    Maslow (1970) defined peak experiences as the most wonderful experiences of a person's life, which may include a sense of awe, well-being, or transcendence. Furthermore, recent research has suggested that psilocybin can produce experiences subjectively rated as uniquely meaningful and significant (Griffiths et al. 2006). It is therefore possible that psilocybin may facilitate or change the nature of peak experiences in users compared to non-users. This study was designed to compare the peak experiences of psilocybin users and non-users, to evaluate the frequency of peak experiences while under the influence of psilocybin, and to assess the perceived degree of alteration of consciousness during these experiences. Participants were recruited through convenience and snowball sampling from undergraduate classes and at a musical event. Participants were divided into three groups, those who reported a peak experience while under the influence of psilocybin (psilocybin peak experience: PPE), participants who had used psilocybin but reported their peak experiences did not occur while they were under the influence of psilocybin (non-psilocybin peak experience: NPPE), and participants who had never used psilocybin (non-user: NU). A total of 101 participants were asked to think about their peak experiences and complete a measure evaluating the degree of alteration of consciousness during that experience. Results indicated that 47% of psilocybin users reported their peak experience occurred while using psilocybin. In addition, there were significant differences among the three groups on all dimensions of alteration of consciousness. Future research is necessary to identify factors that influence the peak experiences of psilocybin users in naturalistic settings and contribute to the different characteristics of peak experiences of psilocybin users and non-users. PMID:23909006

  15. Coburning feed rate simulator (COFERS) user`s manual. Final report

    SciTech Connect

    Stadler, S.

    1994-12-01

    COFERS software enables utility environmental specialists and plant engineers to evaluate potential changes in the chemical composition of bottom ash, fly ash, and flue gas desulfurization (FGD) wastes produced during coburning of a variety of small volume materials with fuel coal at thermal power plants. COFERS helps users choose an appropriate feed rate for low-volume materials so that changes in chemical composition are acceptable and within prescribed limits. Utilities can use COFERS to examine the effects of coburning various wastes with coal in utility boilers. The software allows users to store analyses of any number of prospective coburning waste streams. It performs computations on a variety of plant configurations for which sufficient partition data are available. Users can employ default partition data or enter their own values. The composition of utility ash and FGD waste streams during coburning are estimated, and the maximum amount of waste that can be coburned given user-specified limits on ash and FGD waste composition is computed.

  16. Electronic Systems Test Laboratory (ESTL) User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Robinson, Neil

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ESTL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  17. Radiant Heat Test Facility (RHTF): User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    DelPapa, Steven

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the RHTF. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  18. Vibration and Acoustic Test Facility (VATF): User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Fantasia, Peter M.

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the VATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  19. Audio Development Laboratory (ADL) User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Romero, Andy

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ADL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  20. Antenna Test Facility (ATF): User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Lin, Greg

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  1. Chamber B Thermal/Vacuum Chamber: User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Montz, Mike E.

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of Chamber B. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  2. Structures Test Laboratory (STL). User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Zipay, John J.

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the STL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  3. NMG documentation, part 1: user`s guide

    SciTech Connect

    Fritsch, F.N.; Dickinson, R.P. Jr.

    1996-07-01

    This is the first of a three-part report documenting NMG, the Numerical Mathematics Guide. Part I is aimed at the user of the system. It contains an introduction, with an outline of the complete report, and Chapter 1, User`s Point of View. Part II is aimed at the programmer and contains Chapter 2, How It Works. Part III is aimed at the maintainer of NMG and contains Chapter 3, Maintenance, and Chapter 4, Validation. Each chapter has its own page numbering and table of contents.

  4. Perspectives on distributed computing : thirty people, four user types, and the distributed computing user experience.

    SciTech Connect

    Childers, L.; Liming, L.; Foster, I.; Mathematics and Computer Science; Univ. of Chicago

    2008-10-15

    This report summarizes the methodology and results of a user perspectives study conducted by the Community Driven Improvement of Globus Software (CDIGS) project. The purpose of the study was to document the work-related goals and challenges facing today's scientific technology users, to record their perspectives on Globus software and the distributed-computing ecosystem, and to provide recommendations to the Globus community based on the observations. Globus is a set of open source software components intended to provide a framework for collaborative computational science activities. Rather than attempting to characterize all users or potential users of Globus software, our strategy has been to speak in detail with a small group of individuals in the scientific community whose work appears to be the kind that could benefit from Globus software, learn as much as possible about their work goals and the challenges they face, and describe what we found. The result is a set of statements about specific individuals experiences. We do not claim that these are representative of a potential user community, but we do claim to have found commonalities and differences among the interviewees that may be reflected in the user community as a whole. We present these as a series of hypotheses that can be tested by subsequent studies, and we offer recommendations to Globus developers based on the assumption that these hypotheses are representative. Specifically, we conducted interviews with thirty technology users in the scientific community. We included both people who have used Globus software and those who have not. We made a point of including individuals who represent a variety of roles in scientific projects, for example, scientists, software developers, engineers, and infrastructure providers. The following material is included in this report: (1) A summary of the reported work-related goals, significant issues, and points of satisfaction with the use of Globus software; (2

  5. STS pilot user development program

    NASA Technical Reports Server (NTRS)

    Mcdowell, J. R.

    1977-01-01

    Full exploitation of the STS capabilities will be not only dependent on the extensive use of the STS for known space applications and research, but also on new, innovative ideas of use originating with both current and new users. In recognition of this, NASA has been engaged in a User Development Program for the STS. The program began with four small studies. Each study addressed a separate sector of potential new users to identify techniques and methodologies for user development. The collective results established that a user development function was not only feasible, but necessary for NASA to realize the full potential of the STS. This final report begins with a description of the overall pilot program plan, which involved five specific tasks defined in the contract Statement of Work. Each task is then discussed separately; but two subjects, the development of principal investigators and space processing users, are discussed separately for improved continuity of thought. These discussions are followed by a summary of the primary results and conclusions of the Pilot User Development Program. Specific recommendations of the study are given.

  6. CARE 3 user-friendly interface user's guide

    NASA Technical Reports Server (NTRS)

    Martensen, A. L.

    1987-01-01

    CARE 3 predicts the unreliability of highly reliable reconfigurable fault-tolerant systems that include redundant computers or computer systems. CARE3MENU is a user-friendly interface used to create an input for the CARE 3 program. The CARE3MENU interface has been designed to minimize user input errors. Although a CARE3MENU session may be successfully completed and all parameters may be within specified limits or ranges, the CARE 3 program is not guaranteed to produce meaningful results if the user incorrectly interprets the CARE 3 stochastic model. The CARE3MENU User Guide provides complete information on how to create a CARE 3 model with the interface. The CARE3MENU interface runs under the VAX/VMS operating system.

  7. GEOS. User Tutorials

    SciTech Connect

    Fu, Pengchen; Settgast, Randolph R.; Johnson, Scott M.; Walsh, Stuart D.C.; Morris, Joseph P.; Ryerson, Frederick J.

    2014-12-17

    GEOS is a massively parallel, multi-physics simulation application utilizing high performance computing (HPC) to address subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS enables coupling of di erent solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. Developed at the Lawrence Livermore National Laboratory (LLNL) as a part of a Laboratory-Directed Research and Development (LDRD) Strategic Initiative (SI) project, GEOS represents the culmination of a multi-year ongoing code development and improvement e ort that has leveraged existing code capabilities and sta expertise to design new computational geosciences software.

  8. User interfaces to expert systems

    SciTech Connect

    Agarwal, A.; Emrich, M.L.

    1988-10-01

    Expert Systems are becoming increasingly popular in environments where the user is not well versed in computers or the subject domain. They offer expert advice and can also explain their lines of reasoning. As these systems are applied to highly technical areas, they become complex and large. Therefore, User Systems Interfaces (USIs) become critical. This paper discusses recent technologies that can be applied to improved user communication. In particular, bar menus/graphics, mouse interfaces, touch screens, and voice links will be highlighted. Their applications in the context of SOFTMAN (The Software Manager Apprentice) a knowledge-based system are discussed. 18 refs., 2 figs.

  9. User's Manual for FEM-BEM Method. 1.0

    NASA Technical Reports Server (NTRS)

    Butler, Theresa; Deshpande, M. D. (Technical Monitor)

    2002-01-01

    A user's manual for using FORTRAN code to perform electromagnetic analysis of arbitrarily shaped material cylinders using a hybrid method that combines the finite element method (FEM) and the boundary element method (BEM). In this method, the material cylinder is enclosed by a fictitious boundary and the Maxwell's equations are solved by FEM inside the boundary and by BEM outside the boundary. The electromagnetic scattering on several arbitrarily shaped material cylinders using this FORTRAN code is computed to as examples.

  10. OpenEIS. Users Guide

    SciTech Connect

    Kim, Woohyun; Lutes, Robert G.; Katipamula, Srinivas; Haack, Jereme N.; Carpenter, Brandon J.; Akyol, Bora A.; Monson, Kyle E.; Allwardt, Craig H.; Kang, Timothy; Sharma, Poorva

    2015-02-28

    This document is a users guide for OpenEIS, a software code designed to provide standard methods for authoring, sharing, testing, using and improving algorithms for operational building energy efficiency.

  11. Soybean (2010 JGI User Meeting)

    ScienceCinema

    Stacey, Gary

    2011-04-26

    Gary Stacey, associate director of the National Center for Soybean Biotechnology at the University of Missouri, gives a talk simply titled "Soybean" on March 24, 2010 at the 5th Annual DOE JGI User Meeting

  12. Soybean (2010 JGI User Meeting)

    SciTech Connect

    Stacey, Gary

    2010-03-24

    Gary Stacey, associate director of the National Center for Soybean Biotechnology at the University of Missouri, gives a talk simply titled "Soybean" on March 24, 2010 at the 5th Annual DOE JGI User Meeting

  13. Technology User's Training Is a Waif

    PubMed Central

    Adel Mehraban, Marzieh; Hasanpour, Marzieh; Yazdannik, Ahmadreza; Ajami, Sima

    2013-01-01

    Background In recent decades, health care systems has greatly influenced by the technology development. The technology is helpful to enhance quality of care, reduce costs and improve patient care if appropriate training be applied for technology users. Technology user’s training has been studied in some quantitative studies; however, a few investigators have studied the challenges which nurses’ experienced in this regard. Objectives This qualitative study conducted to explain how nurses explain and perceive challenges in technology user’s training. Materials and Methods This qualitative study was conducted in 2012 by using the content analysis technique in which data were collected through interview. Twenty-four nurses who were occupied in hospitals affiliated to Isfahan University of Medical Sciences were selected by using purposive sampling and in-deep semi-structured interviews (focus-groups and individual interviews) were done. The content of data was analyzed by the Zhang and Wildmouth’s method. Results Initial concepts evolved after content analyzing and five main categories were emerged. Theses categories were “Everything and everyone teach” technology users but there are “No effective training”, “Uninformed resources”, and managers always “Rely on trial and error” and there are some “Learning Barriers”. Conclusions The result of this study outlined important concerns of nurses regarding biomedical technology user training, and determined the need for further education to modernized healthcare system for promoting and expanding patient care. PMID:24719681

  14. Report to users of ATLAS

    SciTech Connect

    Ahmad, I.; Glagola, B.

    1997-03-01

    This report covers the following topics: (1) status of the ATLAS accelerator; (2) progress in R and D towards a proposal for a National ISOL Facility; (3) highlights of recent research at ATLAS; (4) the move of gammasphere from LBNL to ANL; (5) Accelerator Target Development laboratory; (6) Program Advisory Committee; (7) ATLAS User Group Executive Committee; and (8) ATLAS user handbook available in the World Wide Web. A brief summary is given for each topic.

  15. Learning Directory 1970-71. A Comprehensive Guide to Instructional Materials in All Media. Volume I, Users Guide, Source Index, Instructional Materials Index A-Boun; Volume II, Bourq-Dros; Volume III, Drou-Gree; Volume IV, Greg-Mari; Volume V, Mark-Pisc; Volume VI, Pise-Smel; Volume VII, Smer-Z, 0-9.

    ERIC Educational Resources Information Center

    Westinghouse Learning Corp., New York, NY.

    Over 200,000 distinct items of instructional material are indexed in this seven volume annual directory. They are presented in 600,000 entries under more than 225,000 different topics. Information in the directory is divided into two sections: the instructional materials index and the source index. The instructional materials index is organized…

  16. Norplant: users' perspective in Pakistan.

    PubMed

    Rehan, N; Inayatullah, A; Chaudhary, I

    1999-01-01

    Five hundred and eighteen Norplant acceptors (260 ever-users and 258 current users) were interviewed to assess their perceptions about Norplant. The mean age of the acceptors was 32.6+/-5.7 years (mean +/- SD). The mean parity was 4.3 and many of the users (40.2%) were illiterate. The most common reason to choose Norplant was its long duration of action (70.1%) followed by doctor's advice (10.4%) and use by other women (10.1%). Norplant was recommended by family planning workers in 35.3% cases, doctors in 29.2% cases and friends in 17.4% cases. Advertisement did not play any role in the women's choice of Norplant. In 77.3% cases, the decision to use Norplant was a joint decision. Only 15% of the users had fears/anxieties before insertion. Most of these women (44%) were concerned about possible ill-effects of Norplant on their health rather than efficacy. The social acceptance of Norplant was very high (76%) and more than half of the users (52.5%) were satisfied with the method. Among current users, 83.9% wanted to continue Norplant for 5 years. Only 39 users (15.1%) intended to discontinue. The main reason for discontinuation was menstrual disturbance (69.2%), followed by weight gain (12.7%). The study suggests that long duration of effective action and high social acceptance are likely to make Norplant a popular method among Pakistani women. PMID:10997892

  17. GXQ program user`s guide. Revision 1

    SciTech Connect

    Hey, B.E.

    1995-05-10

    This report documents the program user`s guide of a general purpose atmospheric dispersion code named GXQ. GXQ is an IBM Compatible microcomputer based program for calculating atmospheric dispersion coefficients using Hanford site specific joint frequency data. It uses the Gaussian straight line model to calculate either an atmospheric dispersion coefficient (X/Q{prime}) or a maximum normalized air concentration (X/Q). Several options are available to the user which alter the standard Gaussian model to allow for plume depletion, building wake, plume meander, sector averaging, gravitational settling and plume rise. Additional options control handling of the joint frequency data and output. Combinations of the above allow calculation of X/Q{prime} in accordance with Nuclear Regulatory Commission Regulatory Guide 1.145.

  18. User`s guide for the Simplified Risk Model (SRM)

    SciTech Connect

    Peatross, R.G.; Eide, S.A.

    1996-10-01

    SRM can be used to quickly compare relative values relating to risk for many environmental management activities or alternatives at US DOE sites. Purpose of this guide is to provide the user with the essential values and decision points for each model variable. The numerical results are useful for ranking and screening purposes and should not be compared directly against absolute risk numerical results such as in CERCLA baseline risk assessments or Safety Analysis Reports. Implementing the SRM entails performing several preliminary steps, selecting values of the risk elements, calculating the risk equations, and checking the results. SRM considers two types of waste management states: inactive (rest) and active (transition). SRM considers risk from exposures to radionuclides and hazardous chemicals, as well as industrial hazards; however this user`s guide does not cover risk from industrial hazards (Section 10 of Eide et al. (1996) must be consulted).

  19. Training end-users: An on-line help package

    SciTech Connect

    Waite, M.

    1992-03-01

    No matter how wonderful your INGRES application, if the end users don`t know how to use the application it will not be utilized. This paper discusses an on-line help package implemented in our manufacturing database application in order to help our user community use the application. The Materials Fabrication Division (MFD) of Mechanical Engineering is a series of machining shops that do production jobs for the Laboratory. The Fabrication Control System (FCS) is the user interface to an INGRES database. FCS tracks jobs as they traverse the machine shops and FCS maintains the employee payroll. This interface consists of VIFRED forms, menus and EQUEL Fortran code. The on-line help package is an interactive system that responds to the users ``single key stroke`` request for information. The information retrieved is based upon which help key is used and the form or menu from which the request is generated.

  20. Networks and emotion-driven user communities at popular blogs

    NASA Astrophysics Data System (ADS)

    Mitrović, M.; Paltoglou, G.; Tadić, B.

    2010-10-01

    Online communications at web portals represents technology-mediated user interactions, leading to massive data and potentially new techno-social phenomena not seen in real social mixing. Apart from being dynamically driven, the user interactions via posts is indirect, suggesting the importance of the contents of the posted material. We present a systematic way to study Blog data by combined approaches of physics of complex networks and computer science methods of text analysis. We are mapping the Blog data onto a bipartite network where users and posts with comments are two natural partitions. With the machine learning methods we classify the texts of posts and comments for their emotional contents as positive or negative, or otherwise objective (neutral). Using the spectral methods of weighted bipartite graphs, we identify topological communities featuring the users clustered around certain popular posts, and underly the role of emotional contents in the emergence and evolution of these communities.

  1. Automatic TLI recognition system. Part 2: User`s guide

    SciTech Connect

    Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

    1994-05-01

    This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume is a user`s manual for an Automatic Target Recognition (ATR) system. This guide is intended to provide enough information and instruction to allow individuals to the system for their own applications.

  2. User Demographics for Embodiment Customization

    SciTech Connect

    Cowell, Andrew J.; Stanney, Kay M.

    2002-11-15

    Attempts at interface agent personalization are usually aimed at helping the user perform a task or service. For example,scheduling of appointments, inspection of messages, discovering items of interest and different forms of negotiation. While this is very noble undertaking, it makes assumptions about the level of trust and credibility a user may place in such an agent in a realworld setting. If Microsoft's experiments in social user interfaces teach us anything, it is that a ''one size fits all'' solution does not truly engage the user and encourage reuse. This ''relationship management'' between the user and the character begins when the two first meet. As with human-human relationships, first impressions are essential. Instead of looking at the functional aspects of the relationship, we believe the characters embodiment is the best place to start the personalization process. We describe a study in which participants from several different age ranges,genders and ethnic groups were asked their preference of anthropomorphic character, based on a cooperative computer task. We found that participants generally selected characters from the same ethic group as themselves and that almost all participants selected a young character (instead of a middle aged or elderly character). No significant preference was found for character gender.

  3. Camera assisted multimodal user interaction

    NASA Astrophysics Data System (ADS)

    Hannuksela, Jari; Silvén, Olli; Ronkainen, Sami; Alenius, Sakari; Vehviläinen, Markku

    2010-01-01

    Since more processing power, new sensing and display technologies are already available in mobile devices, there has been increased interest in building systems to communicate via different modalities such as speech, gesture, expression, and touch. In context identification based user interfaces, these independent modalities are combined to create new ways how the users interact with hand-helds. While these are unlikely to completely replace traditional interfaces, they will considerably enrich and improve the user experience and task performance. We demonstrate a set of novel user interface concepts that rely on built-in multiple sensors of modern mobile devices for recognizing the context and sequences of actions. In particular, we use the camera to detect whether the user is watching the device, for instance, to make the decision to turn on the display backlight. In our approach the motion sensors are first employed for detecting the handling of the device. Then, based on ambient illumination information provided by a light sensor, the cameras are turned on. The frontal camera is used for face detection, while the back camera provides for supplemental contextual information. The subsequent applications triggered by the context can be, for example, image capturing, or bar code reading.

  4. HTGR Cost Model Users' Manual

    SciTech Connect

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  5. Long Duration Exposure Facility mini-data base user`s guide: IBM-compatible PC computer version. (Diskette)

    SciTech Connect

    Bohnhoff-Hlavacek, G.; Pippin, G.; Dursch, H.

    1995-04-01

    One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview which would include spacecraft design guidelines and space environmental effects. Compiling this information into an easily accessible data base format and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1991. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples from the data base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.

  6. NSUF Irradiated Materials Library

    SciTech Connect

    Cole, James Irvin

    2015-09-01

    The Nuclear Science User Facilities has been in the process of establishing an innovative Irradiated Materials Library concept for maximizing the value of previous and on-going materials and nuclear fuels irradiation test campaigns, including utilization of real-world components retrieved from current and decommissioned reactors. When the ATR national scientific user facility was established in 2007 one of the goals of the program was to establish a library of irradiated samples for users to access and conduct research through competitively reviewed proposal process. As part of the initial effort, staff at the user facility identified legacy materials from previous programs that are still being stored in laboratories and hot-cell facilities at the INL. In addition other materials of interest were identified that are being stored outside the INL that the current owners have volunteered to enter into the library. Finally, over the course of the last several years, the ATR NSUF has irradiated more than 3500 specimens as part of NSUF competitively awarded research projects. The Logistics of managing this large inventory of highly radioactive poses unique challenges. This document will describe materials in the library, outline the policy for accessing these materials and put forth a strategy for making new additions to the library as well as establishing guidelines for minimum pedigree needed to be included in the library to limit the amount of material stored indefinitely without identified value.

  7. Securing the User's Work Environment

    NASA Technical Reports Server (NTRS)

    Cardo, Nicholas P.

    2004-01-01

    High performance computing at the Numerical Aerospace Simulation Facility at NASA Ames Research Center includes C90's, J90's and Origin 2000's. Not only is it necessary to protect these systems from outside attacks, but also to provide a safe working environment on the systems. With the right tools, security anomalies in the user s work environment can be deleted and corrected. Validating proper ownership of files against user s permissions, will reduce the risk of inadvertent data compromise. The detection of extraneous directories and files hidden amongst user home directories is important for identifying potential compromises. The first runs of these utilities detected over 350,000 files with problems. With periodic scans, automated correction of problems takes only minutes. Tools for detecting these types of problems as well as their development techniques will be discussed with emphasis on consistency, portability and efficiency for both UNICOS and IRIX.

  8. Intelligent user interface for intelligent multimedia repository

    NASA Astrophysics Data System (ADS)

    Rhee, Phill-Kyu; Kim, Yong-Hwan; Sim, B. S.; Zhoo, Z. C.; Park, D.-I.

    1997-10-01

    Recently, much effort has been made for efficiency of user interface since the assumption of expertise or well-trained users is nor more valid these days. Today's users of computer systems are expanded to ordinary people. Furthermore, too much network accessible information resources in the form of various media increases rapidly everyday. The primary goal of the intelligent multimedia repository (IMR) is to assist users in accessing multimedia information efficiently. Primary users of the IMR are assumed to be novice users even though the system can be used for users at different levels of expertise. Users are not well-trained people in using computer system. Thus, the semantic gap between users and the system must be mainly reduced form the system site. The technology of intelligent user interface is adopted to minimize the semantic gap. For the intelligent user interface of been designed and developed. Machine learning technologies have been employed to provide user adaptation/intelligent capability to the system. The IUI of the IMR consist user interface manager (UIM), and user model (UM). The UIM performs the function of managing intelligent user interface. The UM stores the behavioral knowledge of the user. The UM stores the history of query and response interactions to absorb communication errors due to semantic gaps between the user and the IMR. The UM is implemented by decision tree based case- based reasoning and back propagation neural networks. Experimental result show the IUI can improve the performance of the IMR.

  9. User's Manual for FEMOM3DS. Version 1.0

    NASA Technical Reports Server (NTRS)

    Reddy, C.J.; Deshpande, M. D.

    1997-01-01

    FEMOM3DS is a computer code written in FORTRAN 77 to compute electromagnetic(EM) scattering characteristics of a three dimensional object with complex materials using combined Finite Element Method (FEM)/Method of Moments (MoM) technique. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity and the triangular elements with the basis functions similar to that described for MoM at the outer boundary. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computers on which the code is intended to run.

  10. User Studies: How To Identify Potential and Actual User Needs.

    ERIC Educational Resources Information Center

    Mchombu, Kingo

    This report explores some key problems and issues in the teaching of a course--Identification of User Information Needs--to information professionals. Tentative practical recommendations are offered, largely as they pertain to developing countries, and the following considerations are discussed: (1) manpower needs for information professionals are…

  11. Google Scholar Users and User Behaviors: An Exploratory Study

    ERIC Educational Resources Information Center

    Herrera, Gail

    2011-01-01

    The University of Mississippi Library created a profile to provide linking from Google Scholar (GS) to library resources in 2005. Although Google Scholar does not provide usage statistics for institutions, use of Google Scholar is clearly evident in looking at library link resolver logs. The purpose of this project is to examine users of Google…

  12. Space Station Freedom user's guide

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This guide is intended to inform prospective users of the accommodations and resources provided by the Space Station Freedom program. Using this information, they can determine if Space Station Freedom is an appropriate laboratory or facility for their research objectives. The steps that users must follow to fly a payload on Freedom are described. This guide covers the accommodations and resources available on the Space Station during the Man-Tended Capability (MTC) period, scheduled to begin the end of 1996, and a Permanently Manned Capability (PMC) beginning in late 1999.

  13. Design Optimization Toolkit: Users' Manual

    SciTech Connect

    Aguilo Valentin, Miguel Alejandro

    2014-07-01

    The Design Optimization Toolkit (DOTk) is a stand-alone C++ software package intended to solve complex design optimization problems. DOTk software package provides a range of solution methods that are suited for gradient/nongradient-based optimization, large scale constrained optimization, and topology optimization. DOTk was design to have a flexible user interface to allow easy access to DOTk solution methods from external engineering software packages. This inherent flexibility makes DOTk barely intrusive to other engineering software packages. As part of this inherent flexibility, DOTk software package provides an easy-to-use MATLAB interface that enables users to call DOTk solution methods directly from the MATLAB command window.

  14. Solar information user priority study

    SciTech Connect

    Belew, W.W.; Wood, B.L.

    1980-05-01

    This report identifies for each solar technology those members or potential members of the solar community who, either currently or in the future, will require solar information. In addition, it rates each user's relative need for information within the next three years. This information will be used as input for subsequent studies that will identify specific user needs information. These studies, in turn, will be the basis for information product and data base development for the Solar Energy Information Data Bank (SEIDB). In addition, they will be input for the Technical Information Dissemination (TID) Program.

  15. GADRAS-DRF user's manual.

    SciTech Connect

    Theisen, Lisa Anne; Mitchell, Dean James; Thoreson, Gregory G.; Harding, Lee T.; Horne, Steve; Bradley, Jon David; Eldridge, Bryce Duncan; Amai, Wendy A.

    2013-09-01

    The Gamma Detector Response and Analysis Software-Detector Response Function (GADRAS-DRF) application computes the response of gamma-ray detectors to incoming radiation. This manual provides step-by-step procedures to acquaint new users with the use of the application. The capabilities include characterization of detector response parameters, plotting and viewing measured and computed spectra, and analyzing spectra to identify isotopes or to estimate flux profiles. GADRAS-DRF can compute and provide detector responses quickly and accurately, giving researchers and other users the ability to obtain usable results in a timely manner (a matter of seconds or minutes).

  16. Software Graphical User Interface For Analysis Of Images

    NASA Technical Reports Server (NTRS)

    Leonard, Desiree M.; Nolf, Scott R.; Avis, Elizabeth L.; Stacy, Kathryn

    1992-01-01

    CAMTOOL software provides graphical interface between Sun Microsystems workstation and Eikonix Model 1412 digitizing camera system. Camera scans and digitizes images, halftones, reflectives, transmissives, rigid or flexible flat material, or three-dimensional objects. Users digitize images and select from three destinations: work-station display screen, magnetic-tape drive, or hard disk. Written in C.

  17. The Concept of Collection from the User's Perspective

    ERIC Educational Resources Information Center

    Lee, Hur-Li

    2005-01-01

    This study explores the concept and functions of collection from the perspective of the user. In-depth interviews with ten professors from a social science discipline and a natural science department provided descriptions of their information seeking involving material sources and their perceptions of the library collection. Participants used the…

  18. Introducing ORACLE: Library Processing in a Multi-User Environment.

    ERIC Educational Resources Information Center

    Queensland Library Board, Brisbane (Australia).

    Currently being developed by the State Library of Queensland, Australia, ORACLE (On-Line Retrieval of Acquisitions, Cataloguing, and Circulation Details for Library Enquiries) is a computerized library system designed to provide rapid processing of library materials in a multi-user environment. It is based on the Australian MARC format and fully…

  19. Career Motivation Achievement Planning: C-MAP. A User's Manual.

    ERIC Educational Resources Information Center

    Farmer, Helen; And Others

    This user's guide provides materials on the Career Motivation and Achievement Planning (C-MAP) Inventory for use with ninth and twelfth grade students. Chapter 1 discusses the purpose and uses of this assessment of long-range career commitment, short-range motivation to achieve on a particular task, and level of education and career aspiration.…

  20. 14 CFR 1215.113 - User charges.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false User charges. 1215.113 Section 1215.113 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA RELAY SATELLITE SYSTEM (TDRSS) Use and Reimbursement Policy for Non-U.S. Government Users § 1215.113 User charges. (a) The user shall reimburse NASA the sum of...

  1. Nineteenth NASTRAN (R) Users' Colloquium

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The proceedings of the the Nineteenth NASTRAN Users' Colloquium held April 22 to 26, 1991 are presented. Topics covered include the application of finite elements in engineering, comparisons with other approaches, unique applications, pre- and postprocessing or auxiliary programs, and new methods of analysis with NASTRAN.

  2. Eighteenth NASTRAN (R) Users' Colloquium

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This publication is the proceedings of the Eighteenth NASTRAN Users' Colloquium held in Portland, Oregon, April 23-27, 1990. It provides some comprehensive general papers on the application of finite elements in engineering, comparisons with other approaches, unique applications, pre- and post-processing or auxiliary programs, and new methods of analysis with NASTRAN.

  3. Sixteenth NASTRAN (R) Users' Colloquium

    NASA Technical Reports Server (NTRS)

    1988-01-01

    These are the proceedings of the Sixteenth NASTRAN Users' Colloquium held in Arlington, Virginia from 25 to 29 April, 1988. Technical papers contributed by participants review general application of finite element methodology and the specific application of the NASA Structural Analysis System (NASTRAN) to a variety of static and dynamic structural problems.

  4. The user friendly card catalog.

    PubMed

    Lee, S K; Ekstrand, N L

    1984-01-01

    The changing roles and relationships of professional staff in Reference and Cataloging departments in the catalog creation process are discussed. Specific examples are given for handling classification, subject headings and cross references. The article stresses the importance of interface between the two departments in making the catalog more accessible to the users of the library. PMID:10268036

  5. Become a Google Power User

    ERIC Educational Resources Information Center

    Gunn, Holly

    2005-01-01

    Become a Goggle Power User was developed for incoming students in Sackville High School, Nova Scotia, Canada, in 2003, and has been adapted for use in other local schools and in several universities, it is an instructional program designed for first-year high school students that was integrated into the English Language Arts curriculum, the…

  6. Space Station commercial user development

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The commercial utilization of the space station is investigated. The interest of nonaerospace firms in the use of the space station is determined. The user requirements are compared to the space station's capabilities and a feasibility analysis of a commercial firm acting as an intermediary between NASA and the private sector to reduce costs is presented.

  7. The real world: The user

    NASA Technical Reports Server (NTRS)

    Kitchell, J.

    1984-01-01

    Satellite communication is by far the most advanced of all commercial applications of space technology. The past, present, and some future possibilities for the field of public communications are considered. Some serious concerns that are becoming apparent to the user of this technology are examined. Among the specific topics mentioned are digital television, electronic mail, cable television, and systems security.

  8. "Friendly" Catalog Forgives User Errors.

    ERIC Educational Resources Information Center

    Cochrane, Pauline A.

    1982-01-01

    Describes the features and operations of a user-searchable online catalog called PaperChase which was developed and implemented for the retrieval of medical literature by physicians at Beth Israel Hospital in Boston. Interaction with the system and use of the catalog during its first year of operation are discussed. (JL)

  9. User discrimination in automotive systems

    NASA Astrophysics Data System (ADS)

    Makrushin, Andrey; Dittmann, Jana; Vielhauer, Claus; Leich, Marcus

    2011-03-01

    The recently developed dual-view touch screens, which are announced to be installed in cars in a near future, give rise to completely new challenges in human-machine interaction. The automotive system should be able to identify if the driver or the passenger is currently interacting with the touch screen to provide a correct response to the touch. The optical devices, due to availability, acceptance by the users and multifunctional usage, approved to be the most appropriate sensing technology for driver/passenger discrimination. In this work the prototypic optical user discrimination system is implemented in the car simulator and evaluated in the laboratory environment with entirely controlled illumination. Three tests were done for this research. One of them examined if the near-infrared illumination should be switched on around the clock, the second one if there is a difference in discrimination performance between day, twilight and night conditions, and the third one examined how the intensive directional lighting influences the performance of the implemented user discrimination algorithm. Despite the high error rates, the evaluation results show that very simple computer vision algorithms are able to solve complicated user discrimination task. The average error rate of 10.42% (daytime with near-infrared illumination) is a very promising result for optical systems.

  10. Twelfth NASTRAN (R) Users' Colloquium

    NASA Technical Reports Server (NTRS)

    1984-01-01

    NASTRAN is a large, comprehensive, nonproprietary, general purpose finite element computer code for structural analysis. The Twelfth Users' Colloquim provides some comprehensive papers on the application of finite element methods in engineering, comparisons with other approaches, unique applications, pre and post processing or auxiliary programs, and new methods of analysis with NASTRAN.

  11. Protective Clothing for Pesticide Users.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC.

    This brief, largely pictorial guide to protective clothing for pesticide users addresses moderately to highly toxic pesticides. The guide discusses the potential hazards of pesticides and the kinds of clothing and equipment that should be worn for personal protection. It also explains how the type of pesticide formulation affects an individual's…

  12. Typical errors of ESP users

    NASA Astrophysics Data System (ADS)

    Eremina, Svetlana V.; Korneva, Anna A.

    2004-07-01

    The paper presents analysis of the errors made by ESP (English for specific purposes) users which have been considered as typical. They occur as a result of misuse of resources of English grammar and tend to resist. Their origin and places of occurrence have also been discussed.

  13. Charging Users for Library Service.

    ERIC Educational Resources Information Center

    Cooper, Michael D.

    1978-01-01

    Examines the question of instituting direct charges for library service, using on-line bibliographic searching as an example, and contrasts this with the current indirect charging system where services are paid for by taxes. Information, as a merit good, should be supplied with or without direct charges, depending upon user status. (CWM)

  14. User Profiles in Organizational Environments

    ERIC Educational Resources Information Center

    Teixeira, Claudio; Pinto, Joaquim Sousa; Martins, Joaquim Arnaldo

    2008-01-01

    Purpose: The aim of this paper is to describe a project to provide an online web portal that can be used as a front-end for all university users--students, teachers, staff--and services, library, administration, e-learning, and e-mail. Design/methodology/approach: The profile model proposed is mainly inheritable, defined by profile components with…

  15. Data latency and the user community

    NASA Astrophysics Data System (ADS)

    Escobar, V. M.; Brown, M. E.; Carroll, M.

    2013-12-01

    The community using NASA Earth science observations in applications has grown significantly, with increasing sophistication to serve national interests. The National Research Council's Earth Science Decadal Survey report stated that the planning for applied and operational considerations in the missions should accompany the acquisition of new knowledge about Earth (NRC, 2007). This directive has made product applications at NASA an integral part of converting the data collected into actionable knowledge that can be used to inform policy. However, successfully bridging scientific research with operational decision making in different application areas requires looking into user data requirements and operational needs. This study was conducted to determine how users are incorporating NASA data into applications and operational processes. The approach included a review of published materials, direct interviews with mission representatives, and an online professional review, which was distributed to over 6000 individuals. We provide a complete description of the findings with definitions and explanations of what goes into measuring latency as well as how users and applications utilize NASA data products. We identified 3 classes of users: operational (need data in 3 hours or less), near real time (need data within a day of acquisition), and scientific users (need highest quality data, time independent). We also determined that most users with applications are interested in specific types of products that may come from multiple missions. These users will take the observations when they are available, however the observations may have additional applications value if they are available either by a certain time of day or within a period of time after acquisition. NASA has supported the need for access to low latency data on an ad-hoc basis and more substantively in stand-alone systems such as the MODIS Rapid Response system and more recently with LANCE. The increased level

  16. ETPRE User`s Manual Version 3.00

    SciTech Connect

    Roginski, R.J.

    1994-05-01

    ETPRE is a preprocessor for the Event Progression Analysis Code EVNTRE. It reads an input file of event definitions and writes the lengthy EVNTRE code input files. ETPRE`s advantage is that it eliminates the error-prone task of manually creating or revising these files since their formats are quite elaborate. The user-friendly format of ETPRE differs from the EVNTRE code format in that questions, branch references, and other event tree components are defined symbolically instead of numerically. When ETPRE is executed, these symbols are converted to their numeric equivalents and written to the output files using formats defined in the EVNTRE Reference Manual. Revisions to event tree models are simplified by allowing the user to edit the symbolic format and rerun the preprocessor, since questions, branch references, and other symbols are automatically resequenced to their new values with each execution. ETPRE and EVNTRE have both been incorporated into the SETAC event tree analysis package.

  17. Waste treatability guidance program. User`s guide. Revision 0

    SciTech Connect

    Toth, C.

    1995-12-21

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.

  18. Activity Management System user reference manual. Revision 1

    SciTech Connect

    Gates, T.A.; Burdick, M.B.

    1994-09-22

    The Activity Management System (AMS) was developed in response to the need for a simple-to-use, low-cost, user interface system for collecting and logging Hanford Waste Vitrification Plant Project (HWVP) activities. This system needed to run on user workstations and provide common user access to a database stored on a local network file server. Most important, users wanted a system that provided a management tool that supported their individual process for completing activities. Existing system treated the performer as a tool of the system. All AMS data is maintained in encrypted format. Users can feel confident that any activities they have entered into the database are private and that, as the originator, they retain sole control over who can see them. Once entered into the AMS database, the activities cannot be accessed by anyone other than the originator, the designated agent, or by authorized viewers who have been explicitly granted the right to look at specific activities by the originator. This user guide is intended to assist new AMS users in learning how to use the application and, after the initial learning process, will serve as an ongoing reference for experienced users in performing infrequently used functions. Online help screens provide reference to some of the key information in this manual. Additional help screens, encompassing all the applicable material in this manual, will be incorporated into future AMS revisions. A third, and most important, source of help is the AMS administrator(s). This guide describes the initial production version of AMS, which has been designated Revision 1.0.

  19. User Preferences in Image Map Using

    NASA Astrophysics Data System (ADS)

    Vondráková, A.; Vozenilek, V.

    2016-06-01

    In the process of map making, the attention is given to the resulting image map (to be accurate, readable, and suit the primary purpose) and its user aspects. Current cartography understands the user issues as all matters relating to user perception, map use and also user preferences. Most commercial cartographic production is strongly connected to economic circumstances. Companies are discovering user's interests and market demands. However, is it sufficient to focus just on the user's preferences? Recent research on user aspects at Palacký University Olomouc addresses a much wider scope of user aspects. The user's preferences are very often distorting - the users think that the particular image map is kind, beautiful, and useful and they wants to buy it (or use it - it depends on the form of the map production). But when the same user gets the task to use practically this particular map (such as finding the shortest way), so the user concludes that initially preferred map is useless, and uses a map, that was worse evaluated according to his preferences. It is, therefore, necessary to evaluate not only the correctness of image maps and their aesthetics but also to assess the user perception and other user issues. For the accomplishment of such testing, eye-tracking technology is a useful tool. The research analysed how users read image maps, or if they prefer image maps over traditional maps. The eye tracking experiment on the comparison of the conventional and image map reading was conducted. The map readers were asked to solve few simple tasks with either conventional or image map. The readers' choice of the map to solve the task was one of investigated aspect of user preferences. Results demonstrate that the user preferences and user needs are often quite different issues. The research outcomes show that it is crucial to implement map user testing into the cartographic production process.

  20. A user-friendly phytoremediation database: creating the searchable database, the users, and the broader implications.

    PubMed

    Famulari, Stevie; Witz, Kyla

    2015-01-01

    Designers, students, teachers, gardeners, farmers, landscape architects, architects, engineers, homeowners, and others have uses for the practice of phytoremediation. This research looks at the creation of a phytoremediation database which is designed for ease of use for a non-scientific user, as well as for students in an educational setting ( http://www.steviefamulari.net/phytoremediation ). During 2012, Environmental Artist & Professor of Landscape Architecture Stevie Famulari, with assistance from Kyla Witz, a landscape architecture student, created an online searchable database designed for high public accessibility. The database is a record of research of plant species that aid in the uptake of contaminants, including metals, organic materials, biodiesels & oils, and radionuclides. The database consists of multiple interconnected indexes categorized into common and scientific plant name, contaminant name, and contaminant type. It includes photographs, hardiness zones, specific plant qualities, full citations to the original research, and other relevant information intended to aid those designing with phytoremediation search for potential plants which may be used to address their site's need. The objective of the terminology section is to remove uncertainty for more inexperienced users, and to clarify terms for a more user-friendly experience. Implications of the work, including education and ease of browsing, as well as use of the database in teaching, are discussed. PMID:26030361

  1. SOWFA + Super Controller User's Manual

    SciTech Connect

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  2. AXAF Science Center: User Support

    NASA Astrophysics Data System (ADS)

    Wilkes, B. J.

    1997-05-01

    The purpose of the AXAF Science Center (ASC) is to provide the support required by the science community to realize fully the potential of the Advanced X-ray Astrophysics Facility (AXAF). We maintain expertise on all aspects of the AXAF mission from submitting a proposal to the receipt and analysis of data by a guest observer. We interface with the observers and the operations center (co-located in Cambridge) in the planning and scheduling of observations and with the instrument teams on the calibration and status of the detectors. We will develop, export and support portable analysis software to allow users to analyse their own data. The User Support Group is the main interface between the ASC and the astronomical community. The facilities provided by the ASC to help potential guest observers will be reviewed in this presentation, including how to: learn about the satellite and instruments, plan observations, access our help-desk.

  3. User friendly far front ends

    SciTech Connect

    Zagel, J.R.; Chapman, L.J.

    1987-10-01

    For years controls group hardware designers have designed microprocessor systems to accomplish specific functions such as refrigeration control. These systems often require years of software effort. The backlog of requests for even simple additions or modifications to software in embedded controllers has become overwhelming. We discuss the requirements of ''far forward'' controllers. Can we build a system that is modular enough to be configurable for specific applications without sacrificing performance. The hardware and software framework must be complete enough to isolate the end user from the peculiarities of bit and byte manipulation, but still allow system specifics to be implanted by the user. It is time to provide embedded controller systems as easy to use as workstation consoles.

  4. GOCE User Toolbox and Tutorial

    NASA Astrophysics Data System (ADS)

    Knudsen, Per; Benveniste, Jerome; Team Gut

    2016-04-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.
GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information
and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced
computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,
and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT
Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development
of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for
oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming
on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,
Oceanography and Solid earth studies.
Accordingly, the GUT version 3 has:
 - An attractive and easy to use Graphic User Interface (GUI) for the toolbox,
 - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,
anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.
 - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  5. GOCE User Toolbox and Tutorial

    NASA Astrophysics Data System (ADS)

    Benveniste, Jérôme; Knudsen, Per

    2016-07-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy, Oceanography and Solid earth studies. Accordingly, the GUT version 3 has: - An attractive and easy to use Graphic User Interface (GUI) for the toolbox, - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients, anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies. - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  6. Prototyping user displays using CLIPS

    NASA Technical Reports Server (NTRS)

    Kosta, Charles P.; Miller, Ross; Krolak, Patrick; Vesty, Matt

    1990-01-01

    CLIPS is being used as an integral module of a rapid prototyping system. The prototyping system consists of a display manager for object browsing, a graph program for displaying line and bar charts, and a communications server for routing messages between modules. A CLIPS simulation of a physical model provides dynamic control of the user's display. Currently, a project is well underway to prototype the Advanced Automation System (AAS) for the Federal Aviation Administration.

  7. ALMA from the Users' Perspective

    NASA Astrophysics Data System (ADS)

    Johnson, Kelsey

    2010-05-01

    After decades of dreaming and preparation, the call for early science with ALMA is just around the corner. The goal of this talk is to illustrate the process of preparing and carrying out a research program with ALMA. This presentation will step through the user interface for proposal preparation, proposal review, project tracking, data acquisition, and post-processing. Examples of the software tools, including the simulator and spectral line catalog, will be included.

  8. Fifteenth LAMPF users group meeting

    SciTech Connect

    Cochran, D.R.F.

    1982-03-01

    The Fifteenth LAMPF Users Group Meeting was held November 2-3, 1981 at the Clinton P. Anderson Meson Physical Facility. The program of papers scheduled to be presented was amended to include a Report from Washington by Clarence R. Richardson, US Department of Energy. The general meeting ended with a round-table working group discussion concerning the Planning for a Kaon Factory. Individual items from the meeting were prepared separately for the data base.

  9. Cohesive Zone Model User Element

    2007-04-17

    Cohesive Zone Model User Element (CZM UEL) is an implementation of a Cohesive Zone Model as an element for use in finite element simulations. CZM UEL computes a nodal force vector and stiffness matrix from a vector of nodal displacements. It is designed for structural analysts using finite element software to predict crack initiation, crack propagation, and the effect of a crack on the rest of a structure.

  10. GOCE User Toolbox and Tutorial

    NASA Astrophysics Data System (ADS)

    Knudsen, Per; Benveniste, Jerome; Team GUT

    2015-04-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.
GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information
and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced
computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,
and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT
Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development
of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for
oceanography. The current version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). The GUT will be further developed through a collaborative effort where the scientific communities participate aiming
on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,
Oceanography and Solid earth studies.
 The objective of the new GUT project is to further develop GUT by implementing functionalities that have been
requested by the general science community. Accordingly, the GUT version 3 will have:
 - An attractive and easy to use Graphic User Interface (GUI) for the toolbox,
 - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,
anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.
 - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  11. Sierra Structural Dynamics User's Notes

    SciTech Connect

    Reese, Garth M.

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

  12. The Nimbus 4 user's guide

    NASA Technical Reports Server (NTRS)

    Sabatini, R. R. (Editor)

    1970-01-01

    Background information on the Nimbus 4 spacecraft and experiments is provided for potential data users as a basis for selecting, obtaining, and utilizing Nimbus 4 data in research studies. The basic spacecraft system operation and the objectives of the Nimbus 4 flight are outlined, with a detailed discussion of each of the experiments included. The format, archiving, and access to the data are also described. Finally, the contents and format of the Nimbus 4 data catalogs are described.

  13. GOCE User Toolbox and Tutorial

    NASA Astrophysics Data System (ADS)

    Knudsen, P.; Lucas, B.; Benveniste, J.

    2014-12-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides informationand guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advancedcomputer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUTInstall Guide. A set of a-priori data and models are made available as well. Without any doubt the developmentof the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data foroceanography.The current version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth).The GUT will be further developed through a collaborative effort where the scientific communities participate aimingon an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,Oceanography and Solid earth studies.The objective of the new GUT project is to further develop GUT by implementing functionalities that have beenrequested by the general science community. Accordingly, the GUT version 3 will have:- An attractive and easy to use Graphic User Interface (GUI) for the toolbox,- Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.- An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  14. Modular Manufacturing Simulator: Users Manual

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The Modular Manufacturing Simulator (MMS) has been developed for the beginning user of computer simulations. Consequently, the MMS cannot model complex systems that require branching and convergence logic. Once a user becomes more proficient in computer simulation and wants to add more complexity, the user is encouraged to use one of the many available commercial simulation systems. The (MMS) is based on the SSE5 that was developed in the early 1990's by the University of Alabama in Huntsville (UAH). A recent survey by MSFC indicated that the simulator has been a major contributor to the economic impact of the MSFC technology transfer program. Many manufacturers have requested additional features for the SSE5. Consequently, the following features have been added to the MMS that are not available in the SSE5: runs under Windows, print option for both input parameters and output statistics, operator can be fixed at a station or assigned to a group of stations, operator movement based on time limit, part limit, or work-in-process (WIP) limit at next station. The movement options for a moveable operators are: go to station with largest WIP, rabbit chase where operator moves in circular sequence between stations, and push/pull where operator moves back and forth between stations. This user's manual contains the necessary information for installing the MMS on a PC, a description of the various MMS commands, and the solutions to a number of sample problems using the MMS. Also included in the beginning of this report is a brief discussion of technology transfer.

  15. Presto 4.20 user's guide : addendum for shock capabilities.

    SciTech Connect

    Spencer, Benjamin Whiting

    2011-06-01

    This is an addendum to the Presto 4.20 User's Guide to document additional capabilities that are available for use in the Presto{_}ITAR code that are not available for use in the standard version of Presto. Presto{_}ITAR is an enhanced version of Presto that provides capabilities that make it regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. This code is part of the Vivace product, and is only distributed to entities that comply with ITAR regulations. The enhancements primarily focus on material models that include an energy-dependent pressure response, appropriate for very large deformations and strain rates. Since this is an addendum to the standard Presto User's Guide, please refer to that document first for general descriptions of code capability and use. This addendum documents material models and element features that support energy-dependent material models.

  16. [Decision making in cannabis users].

    PubMed

    Alameda Bailén, Jose Ramón; Paíno Quesada, Susana; Mogedas Valladares, Ana Isabel

    2012-01-01

    Several neuropsychological studies have shown that chronic cannabis users have cognitive impairments, including decision-making process. Therefore, this study aims to evaluate the process, through the somatic marker hypothesis in a sample of 41 cannabis users compared with a control group of equal size, and to analyze the influence of age, sex, education level, age of onset and amount of daily consumption. In order to do that, the software "Cartas" (similar to the Iowa Gambling Task), was used, implementing its two versions: normal and reverse. The results show significant differences between cannabis users and control group in the normal and reverse task execution. By block analysis, the control group obtained higher scores in the normal task execution, however, in the reverse task, the differences between groups are present in the initial task execution but not final task execution. None of the analyzed variables (age, sex ...) are significantly related to task performance. These results suggest the existence of alterations in the decision making process of consumers cannabis, which may relate to the difficulty in generating somatic markers, and not for insensitivity punishments insensitivity. PMID:22648319

  17. 43 CFR 3603.11 - What rights pertain to users of community pits?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What rights pertain to users of community... DISPOSAL Community Pits and Common Use Areas Disposal of Materials-Community Pits and Common Use Areas § 3603.11 What rights pertain to users of community pits? BLM's designation of a community pit site,...

  18. Spherical roller bearing analysis. SKF computer program SPHERBEAN. Volume 2: User's manual

    NASA Technical Reports Server (NTRS)

    Kleckner, R. J.; Dyba, G. J.

    1980-01-01

    The user's guide for the SPHERBEAN computer program for prediction of the thermomechanical performance characteristics of high speed lubricated double row spherical roller bearings is presented. The material presented is structured to guide the user in the practical and correct implementation of SPHERBEAN. Input and output, guidelines for program use, and sample executions are detailed.

  19. Proceedings of the Second Annual NASA Science Internet User Working Group Conference

    NASA Technical Reports Server (NTRS)

    Jackson, Lenore A. (Editor); Gary, J. Patrick (Editor)

    1991-01-01

    Copies of the agenda, list of attendees, meeting summaries, and all presentations and exhibit material are contained. Included are plenary sessions, exhibits of advanced networking applications, and user subgroup meetings on NASA Science Internet policy, networking, security, and user services and applications topics.

  20. First Entry: Report on a Qualitative Exploratory Study of Novice User Experience with Online Finding Aids

    ERIC Educational Resources Information Center

    Scheir, Wendy

    2005-01-01

    Many of those now accessing archives through online finding aids are encountering primary materials (albeit virtually) for the first time. These users are often unfamiliar with finding aid structure, terminology, and principles. This article reports on a qualitative, exploratory study of a subset of these novice users. The study concentrated on…

  1. An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

    NASA Technical Reports Server (NTRS)

    Turon, Albert; Camanho, Pedro P.; Costa, Josep; Davila, Carlos G.

    2004-01-01

    A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics (DM). The constitutive equations that result from the variation of the free energy with damage are used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. Interfacial penetration of two adjacent layers after complete decohesion is prevented by the formulation of the free energy. The model is implemented into the commercial finite element code ABAQUS by means of a user-written decohesion element. Finally, the numerical predictions given by the model are compared with experimental results.

  2. User's manual for CBS3DS, version 1.0

    NASA Astrophysics Data System (ADS)

    Reddy, C. J.; Deshpande, M. D.

    1995-10-01

    CBS3DS is a computer code written in FORTRAN 77 to compute the backscattering radar cross section of cavity backed apertures in infinite ground plane and slots in thick infinite ground plane. CBS3DS implements the hybrid Finite Element Method (FEM) and Method of Moments (MoM) techniques. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity/slot and the triangular elements with the basis functions for MoM at the apertures. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials; due to MoM, the apertures can be of any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computer the code is intended to run.

  3. User-configurable MAGIC for electromagnetic PIC calculations

    NASA Astrophysics Data System (ADS)

    Goplen, Bruce; Ludeking, Larry; Smith, David; Warren, Gary

    1995-05-01

    MAGIC is a user-configurable code that solves Maxwell's equations together with Lorentz particle motion. A variety of 2D, finite-difference electromagnetic algorithms and 3D particle-in-cell algorithms may be combined in problem-specific ways to provide fast, accurate, steady-state and transient calculations for many research and design needs. Default configurations provide good speed and accuracy for most applications, and a library of templates offers optimized algorithm configurations for specific devices. A programmable processor named POSTER provides advanced post-analysis of the field and particle solutions. Coordinate systems, boundary conditions, geometry, and materials are specified by the user, and grid generation can be manual, user-assisted, or fully automatic. MAGIC has a fully 3D counterpart called SOS. Programs exist to connect these analysis tools to parametric and CAD input from an integrated design environment.

  4. Specialized Environmental Chamber Test Complex: User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Montz, Michael E.

    2011-01-01

    Test process, milestones and inputs are unknowns to first-time users of the Specialized Environmental Test Complex. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  5. User's manual for CBS3DS, version 1.0

    NASA Technical Reports Server (NTRS)

    Reddy, C. J.; Deshpande, M. D.

    1995-01-01

    CBS3DS is a computer code written in FORTRAN 77 to compute the backscattering radar cross section of cavity backed apertures in infinite ground plane and slots in thick infinite ground plane. CBS3DS implements the hybrid Finite Element Method (FEM) and Method of Moments (MoM) techniques. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity/slot and the triangular elements with the basis functions for MoM at the apertures. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials; due to MoM, the apertures can be of any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computer the code is intended to run.

  6. User's Manual for FEMOM3DR. Version 1.0

    NASA Technical Reports Server (NTRS)

    Reddy, C. J.

    1998-01-01

    FEMoM3DR is a computer code written in FORTRAN 77 to compute radiation characteristics of antennas on 3D body using combined Finite Element Method (FEM)/Method of Moments (MoM) technique. The code is written to handle different feeding structures like coaxial line, rectangular waveguide, and circular waveguide. This code uses the tetrahedral elements, with vector edge basis functions for FEM and triangular elements with roof-top basis functions for MoM. By virtue of FEM, this code can handle any arbitrary shaped three dimensional bodies with inhomogeneous lossy materials; and due to MoM the computational domain can be terminated in any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computers on which the code is intended to run.

  7. A cytomorphometric analysis of oral mucosal changes in tobacco users

    PubMed Central

    Khot, Komal; Deshmane, Swati; Bagri-Manjarekar, Kriti; Warke, Darshana; Kotak, Keyuri

    2015-01-01

    Aim: Tobacco use is the major cause of oral cancer, which is the sixth most common form of malignancy globally. Even in the absence of clinical manifestations, early changes in the oral mucosa can be detected microscopically by exfoliative cytology. The present study aimed to study and compare the cellular changes in the oral mucosa of tobacco users using cytomorphometry. Materials and Methods: A total of 80 subjects were included: 20 without any tobacco use habits, 20 tobacco chewers, 20 smokers, and 20 mishri users. Smears were collected from each subject, fixed, and stained using Papanicolaou stain. All slides were evaluated for nuclear and cytoplasmic changes using image analysis software. Results: Statistically significant decrease in cytoplasmic area and an increase in nuclear area and nuclear-cytoplasmic ratio were observed in tobacco users. Conclusion: Tobacco in any form causes significant cellular changes, which could be the earliest indicators of developing malignant pathology. Exfoliative cytology can be used to detect such changes. PMID:26604613

  8. Heterogeneous Clustering: Operational and User Impacts

    NASA Technical Reports Server (NTRS)

    Salm, Saita Wood

    1999-01-01

    Heterogeneous clustering can improve overall utilization of multiple hosts and can provide better turnaround to users by balancing workloads across hosts. Building a cluster requires both operational changes and revisions in user scripts.

  9. Academic Library User Education in China.

    ERIC Educational Resources Information Center

    Sun, Ping; Rader, Hannelore B.

    1999-01-01

    Discusses user education in China's academic libraries in light of educational reform and the changing role of academic libraries. Describes information technology developments, objectives of user education, and the emphasis on computerbased searching in the Tsinghua University library. (LRW)

  10. Understanding Active and Passive Users: The Effects of an Active User Using Normal, Hard and Unreliable Technologies on User Assessment of Trust in Technology and Co-User

    PubMed Central

    Montague, Enid; JieXu

    2011-01-01

    The aim of this study was to understand how passive users perceive the trustworthiness of active users and technologies under varying technological conditions. An experimental study was designed to vary the functioning of technologies that active users interacted with, while passive users observed these interactions. Active and passive user ratings of technology and partner were collected. Exploratory data analysis suggests that passive users developed perceptions of technologies based on the functioning of the technology and how the active user interacted with the technologies. Findings from this research have implications for the design of technologies in environments where active and passive users interact with technologies in different ways. Future work in this area should explore interventions that lead to enhanced affective engagement and trust calibration. PMID:22192788

  11. User`s guide to ESME v. 8.0

    SciTech Connect

    MacLachlan, J.

    1993-03-08

    ESME is a computer program to calculate the evolution of a distribution of particles in energy and azimuth as it is acted upon by the radio frequency system of a proton synchrotron. It provides for the modeling of multiple rf systems, feedback control, space charge, and many of the effects of longitudinal coupling impedance. The capabilities of the program are described, and the requirements for input data are specified in sufficient detail to permit significant calculations by an uninitiated user. The program is currently at version 8.0 and extensively modified since the previous user documentation. Changes since the 7.xx versions include a new command and associated parameters for mapping phase space flow lines, new names for a few parameters, and a few new parameters for old commands. Special attention has been given to features relating to calculation of the collective potential and the generation of phase space trajectories including its effects. The VAX-based code management convention has been modified slightly to permit EXPAND pre-compile options to be used in the include files as well as the program source files.

  12. User`s guide to ESME v. 8.1

    SciTech Connect

    MacLachlan, J.

    1993-08-26

    ESME is a computer program to calculate the evolution of a distribution of particles in energy and azimuth as it is acted upon by the radio frequency system of a proton synchrotron. It provides for the modeling of multiple rf systems, feedback control, space charge, and many of the effects of longitudinal coupling impedance. The capabilities of the program are described, and the requirements for input data are specified in sufficient detail to permit significant calculations by an uninitiated user. The program is currently at version 8.1 and extensively modified since the previous user documentation. Changes since the 7.xx versions include a new command and associated parameters for mapping phase space flow lines, new names for a few parameters, and a few new parameters for old commands. Special attention has been given to features relating to calculation of the collective potential and the generation of phase space trajectories including its effects. The VAX-based code management convention has been modified slightly to permit pre-compile options to be used in the include files as well as the program source files. The biggest change from v. 8.0 to v. 8.1 is the addition of code for HIGZ-based graphics; the new code and that using DI3000/GRAFMAKER are alternatives selectable at compilation. Other changes relate to improved control of smoothing options in the calculation of collective potential, fourier spectra, and mountain range plots.

  13. Manufactured Home Energy Audit user`s manual

    SciTech Connect

    1997-09-01

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  14. Challenges to LRS Materials.

    ERIC Educational Resources Information Center

    Austin Community Coll., TX.

    The Learning Resource Services (LRS) department at Austin Community College, in Texas, has developed a procedure for dealing with situations when a library user objects to items in a collection or display or protests that an item is not in the collection. First, three resources have been created to handle challenges. The LRS Materials Selection…

  15. Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

    NASA Astrophysics Data System (ADS)

    Jain, Anubhav; Ong, Shyue Ping; Hautier, Geoffroy; Chen, Wei; Richards, William Davidson; Dacek, Stephen; Cholia, Shreyas; Gunter, Dan; Skinner, David; Ceder, Gerbrand; Persson, Kristin A.

    2013-07-01

    Accelerating the discovery of advanced materials is essential for human welfare and sustainable, clean energy. In this paper, we introduce the Materials Project (www.materialsproject.org), a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials. This open dataset can be accessed through multiple channels for both interactive exploration and data mining. The Materials Project also seeks to create open-source platforms for developing robust, sophisticated materials analyses. Future efforts will enable users to perform ``rapid-prototyping'' of new materials in silico, and provide researchers with new avenues for cost-effective, data-driven materials design.

  16. User and Performance Impacts from Franklin Upgrades

    SciTech Connect

    He, Yun

    2009-05-10

    The NERSC flagship computer Cray XT4 system"Franklin" has gone through three major upgrades: quad core upgrade, CLE 2.1 upgrade, and IO upgrade, during the past year. In this paper, we will discuss the various aspects of the user impacts such as user access, user environment, and user issues etc from these upgrades. The performance impacts on the kernel benchmarks and selected application benchmarks will also be presented.

  17. MCRT user's guide and documentation

    SciTech Connect

    Jackson, K.J.; Wolery, T.J.; Bourcier, W.L.; Delany, J.M.; Moore, R.M.; Clinnick, M.L.; Lundeen, S.R.

    1988-04-14

    MCRT is a FORTRAN computer program used to generate computer files containing thermodynamic data for chemical reactions involving solids, gases, and aqueous species. The MCRT code uses basic thermodynamic and reaction stoichiometry information stored in data and input files to produce an output file containing a grid describing the temperature dependence of equilibrium constants of mineral hydrolysis reactions and aqueous dissociation reactions. These reaction properties comprise a critical portion of the thermodynamic data needed by the geochemical modeling codes in the EQ3/6* software package. The set of files used to store the thermodynamic data for the aqueous, solid, and gaseous species and associated FORTRAN data base manipulation codes are also described in this user's manual. However, the data base structure and use of the data manipulation programs are described only in enough detail to illustrate their relationship to the operation of the MCRT code. This user's guide is designed to acquaint a new user with the MCRT program and its associated data files, and to assist in the use of the code and its various options. The data base processing codes MDAP and DARP are briefly described and several sample runs of the programs are included to illustrate the options available. In addition, the structure of the MCRT code, the coding conventions used in the EQ3/6 package, and the methods used in MCRT to extrapolate thermodynamic data to elevated temperatures are described. Appendices contain descriptions of the important variables defined in MCRT and a glossary of subroutines called by MCRT, along with their purposes. 6 figs.

  18. Orion: a commissioned user facility

    NASA Astrophysics Data System (ADS)

    Treadwell, P. A.; Allan, P.; Cann, N.; Danson, C.; Duffield, S.; Elsmere, S.; Edwards, R.; Egan, D.; Girling, M.; Gumbrell, E.; Harvey, E.; Hill, M.; Hillier, D.; Hoarty, D.; Hobbs, L.; Hopps, N.; Hussey, D.; Oades, K.; James, S.; Norman, M.; Palmer, J.; Parker, S.; Winter, D.; Bett, T.

    2013-05-01

    The Orion Laser Facility at AWE in the UK consists of ten nanosecond beamlines and two sub-picosecond beamlines. The nanosecond beamlines each nominally deliver 500 J at 351 nm in a 1 ns square temporal profile, but can also deliver a user-definable temporal profile with durations between 0.1 ns and 5 ns. The sub-picosecond beamlines each nominally deliver 500 J at 1053 nm in a 500 fs pulse, with a peak irradiance of greater than 1021 W/cm2. One of the sub-picosecond beamlines can also be frequency-converted to deliver 100 J at 527 nm in a 500 fs pulse, although this is at half the aperture of the 1053 nm beam. Commissioning of all twelve beamlines has been completed, including the 527 nm sub-picosecond option. An overview of the design of the Orion beamlines will be presented, along with a summary of the commissioning and subsequent performance data. The design of Orion was underwritten by running various computer simulations of the beamlines. Work is now underway to validate these simulations against real system data, with the aim of creating predictive models of beamline performance. These predictive models will enable the user's experimental requirements to be critically assessed ahead of time, and will ultimately be used to determine key system settings and parameters. The facility is now conducting high energy density physics experiments. A capability experiment has already been conducted that demonstrates that Orion can generate plasmas at several million Kelvin and several times solid density. From March 2013 15% of the facility operating time will be given over to external academic users in addition to collaborative experiments with AWE scientists.

  19. Agricultural aviation user requirement priorities

    NASA Technical Reports Server (NTRS)

    Kaplan, R. L.; Meeland, T.; Peterson, J. E.

    1977-01-01

    The results are given of a research project pertaining to the development of agricultural aviation user requirement priorities. The raw data utilized in the project was obtained from the National Agricultural Aviation Association. A specially configured poll, developed by the Actuarial Research Corporation was used to solicit responses from NAAA members and others. The primary product of the poll is the specification of seriousness as determined by the respondents for some selected agricultural aviation problem areas identified and defined during the course of an intensive analysis by the Actuarial Research Corporation.

  20. MRDAP User/Developer Documentation

    SciTech Connect

    Joshua Cogliati; Michael Milvich

    2009-09-01

    The Multi-Reactor Design and Analysis Platform (MRDAP) is designed to simplify the creation, transfer and processing of data between computational codes. MRDAP accomplishes these objectives with three parts: 1. allows each integrated code, through a plugin, to specify the required input for execution and the required output needed, 2. creates an interface for execution and data transfer, 3. enables the creation of Graphical User Interfaces (GUI) to assist with input preparation and data visualization. Ultimately, the main motivation of this work is to enable analysts (who perform reactor physics calculations routinely), by providing a tool that increases efficiency and minimizes the potential for errors or failed executions.

  1. User's guide to SFTRAN/1100

    NASA Technical Reports Server (NTRS)

    Ford, W. F.; Fessler, T. E.

    1978-01-01

    Extensions and improvements were made to SFTRAN, a structured programming language. This language was implemented as a precompiler that translates from SFTRAN to FORTRAN. It was available to batch and conversational users of the UNIVAC 1100 computer system. The SFTRAN language and its use are described. In addition, conversational time-sharing system command subroutines were implemented that eliminated the complications of dealing with extra files and processing steps that the use of a precompiler would otherwise require. These command subroutines are reported, and their use is illustrated by examples.

  2. User's guide to DOE facilities

    SciTech Connect

    Not Available

    1984-01-01

    The Department of Energy's research laboratories represent valuable, often unique, resources for university and industrial scientists. It is DOE policy to make these laboratories and facilities available to qualified scientists. The answers to such questions as who are eligible, what and where are the facilities, what is the cost, when can they be used, are given. Data sheets are presented for each facility to provide information such as location, user contact, description of research, etc. A subject index refers to areas of research and equipment available.

  3. IDSE Version 1 User's Manual

    NASA Technical Reports Server (NTRS)

    Mayer, Richard

    1988-01-01

    The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

  4. The IDL astronomy user's library

    NASA Technical Reports Server (NTRS)

    Landsman, W. B.

    1992-01-01

    IDL (Interactive Data Language) is a commercial programming, plotting, and image display language, which is widely used in astronomy. The IDL Astronomy User's Library is a central repository of over 400 astronomy-related IDL procedures accessible via anonymous FTP. The author will overview the use of IDL within the astronomical community and discuss recent enhancements at the IDL astronomy library. These enhancements include a fairly complete I/O package for FITS images and tables, an image deconvolution package and an image mosaic package, and access to IDL Open Windows/Motif widgets interface. The IDL Astronomy Library is funded by NASA through the Astrophysics Software and Research Aids Program.

  5. Invoking the User from Data to Design

    ERIC Educational Resources Information Center

    Tempelman-Kluit, Nadaleen; Pearce, Alexa

    2014-01-01

    Personas, stemming from the field of user-centered design (UCD), are hypothetical users that represent the behaviors, goals, and values of actual users. This study describes the creation of personas in an academic library. With the goal of leveraging service-generated data, the authors coded a sample of chat reference transcripts, producing two…

  6. Penn State's Visual Image User Study

    ERIC Educational Resources Information Center

    Pisciotta, Henry A.; Dooris, Michael J.; Frost, James; Halm, Michael

    2005-01-01

    The Visual Image User Study (VIUS), an extensive needs assessment project at Penn State University, describes academic users of pictures and their perceptions. These findings outline the potential market for digital images and list the likely determinates of whether or not a system will be used. They also explain some key user requirements for…

  7. Syllabus Information Depiction System (SIDS) user's guide

    SciTech Connect

    Waterman, D.K.; Skinner, N.L.

    1987-10-01

    The Syllabus Information Depiction System (SIDS) is an automated tool designed to track the aircrew training syllabi of the Marine Corps. This report is the User's Manual for this data base system, providing users with instructions to help them use the system more efficiently. This document contains printed screen layouts that will guide the user step-by-step through the written instructions.

  8. Second Language Users and Emerging English Designs

    ERIC Educational Resources Information Center

    Jordan, Jay

    2009-01-01

    As English spreads as an international language, it evolves through diverse users' writing and speaking. However, traditional views of ESL users focus on their distance from fairly static notions of English-language competence. This research uses a grounded theory approach to describe a range of competencies that emerge in ESL users' interactions…

  9. End-Users: Dollars but Doubts.

    ERIC Educational Resources Information Center

    Arnold, Stephen E.

    1989-01-01

    Identifies existing categories of end users of online information retrieval systems, discusses problems that have been encountered by information providers and customers, and suggests strategies for capturing new end-user markets. Issues discussed include user cordial interfaces, CD-ROM products, ethics involved in information provision, and…

  10. Towards automation of user interface design

    NASA Technical Reports Server (NTRS)

    Gastner, Rainer; Kraetzschmar, Gerhard K.; Lutz, Ernst

    1992-01-01

    This paper suggests an approach to automatic software design in the domain of graphical user interfaces. There are still some drawbacks in existing user interface management systems (UIMS's) which basically offer only quantitative layout specifications via direct manipulation. Our approach suggests a convenient way to get a default graphical user interface which may be customized and redesigned easily in further prototyping cycles.

  11. Coping with Loneliness: Young Adult Drug Users.

    ERIC Educational Resources Information Center

    Rokach, Ami; Orzeck, Tricia

    Since there appears to be a connection between substance use (and abuse) and loneliness it is of theoretical and clinical interest to explore the differences of coping with loneliness which drug users employ. The present study examined the manner in which MDMA (Ecstasy) users in comparison with non-MDMA (Non-Ecstasy) users and the general…

  12. Development of the User-Computer Interface.

    ERIC Educational Resources Information Center

    McCann, Patrick H.

    1983-01-01

    Discusses the design and development of the user-computer interface in terms of the personal computer user's psychological needs and physical, perceptual, and conceptual contact with the system. Principles for the development of a user-system dialog that meets the requirements of transparency and visibility are suggested. Twenty-six references are…

  13. User needs: is a survey the answer

    SciTech Connect

    Gardner, J.L.

    1980-01-01

    Some of the ramifications of user needs, user satisfaction, and the survey as a shaper of library policy are discussed. The presentation is in three parts: philosophical thinking on user needs and satisfaction, a modest tutorial on survey methodology, and a brief review of the Sandia National Laboratory Technical Library's use of surveys for information gathering and decision making. (RWR)

  14. 14 CFR 1215.113 - User charges.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false User charges. 1215.113 Section 1215.113 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA RELAY SATELLITE SYSTEM (TDRSS) Use and Reimbursement Policy for Non-U.S. Government Users § 1215.113 User charges. (a) The...

  15. 14 CFR 1215.113 - User charges.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false User charges. 1215.113 Section 1215.113 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA RELAY SATELLITE SYSTEM (TDRSS) Use and Reimbursement Policy for Non-U.S. Government Users § 1215.113 User charges. (a) The...

  16. 14 CFR 1215.113 - User charges.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true User charges. 1215.113 Section 1215.113 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA RELAY SATELLITE SYSTEM (TDRSS) Use and Reimbursement Policy for Non-U.S. Government Users § 1215.113 User charges. (a) The...

  17. User-Centered Computer Aided Language Learning

    ERIC Educational Resources Information Center

    Zaphiris, Panayiotis, Ed.; Zacharia, Giorgos, Ed.

    2006-01-01

    In the field of computer aided language learning (CALL), there is a need for emphasizing the importance of the user. "User-Centered Computer Aided Language Learning" presents methodologies, strategies, and design approaches for building interfaces for a user-centered CALL environment, creating a deeper understanding of the opportunities and…

  18. LDEF materials data bases

    NASA Technical Reports Server (NTRS)

    Funk, Joan G.; Strickland, John W.; Davis, John M.

    1993-01-01

    The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials representing the largest collection of materials flown in low Earth orbit (LEO) and retrieved for ground based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO space missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing data bases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper discusses the format and content of the three data bases developed or being developed to accomplish this task. The hardware and software requirements for each of these three data bases are discussed along with current availability of the data bases. This paper also serves as a user's guide to the MAPTIS LDEF Materials Data Base.

  19. Phase 2 STS new user development program. Volume 1: Executive summary

    NASA Technical Reports Server (NTRS)

    Mcdowell, J. R.

    1976-01-01

    A methodology for developing new users for STS other than NASA and DoD, thereby maximizing the use of the STS system was developed. The approach to user development, reflected in the implementation plan, and attendant informational material to be used were evaluated by conducting a series of test cases with selected user organizations. These test case organizations were, in effect, used as consultants to evaluate the effectiveness, the needs, the completeness, and the adequacy of the user development approach and informational material. The selection of the test cases provided a variety of potential STS users covering industry, other government agencies, and the educational sector. The test cases covered various use areas and provided a mix of user organization types. A summary of the actual test cases conducted is given. The conduct of the test cases verified the general approach of the implementation plan, the validity of the user development strategy prepared for each test case organization and the effectiveness of the STS basic and user customized informational material.

  20. National Scientific User Facility Purpose and Capabilities

    SciTech Connect

    K. E. Rosenberg; T. R. Allen; J. C. Haley; M. K. Meyer

    2010-09-01

    The U.S. Department of Energy (DOE) designated the Advanced Test Reactor (ATR) as a National Scientific User Facility (NSUF) in April 2007. This designation allows the ATR to become a cornerstone of nuclear energy research and development (R&D) within the U.S. by making it easier for universities, the commercial power industry, other national laboratories, and international organizations to conduct nuclear energy R&D. The mission of the ATR NSUF is to provide nuclear energy researchers access to world-class facilities, thereby facilitating the advancement of nuclear science and technology within the U.S. In support of this mission, hot cell laboratories are being upgraded. These upgrades include a set of lead shielded cells that will house Irradiated Assisted Stress Corrosion Cracking (IASCC) test rigs and construction of a shielded laboratory facility. A primary function of this shielded laboratory is to provide a state of the art type laboratory facility that is functional, efficient and flexible that is dedicated to the analysis and characterization of nuclear and non-nuclear materials. The facility shall be relatively easy to reconfigure to provide laboratory scale hot cave space for housing current and future nuclear material scientific research instruments.

  1. Health status of ayahuasca users.

    PubMed

    Barbosa, Paulo Cesar Ribeiro; Mizumoto, Suely; Bogenschutz, Michael P; Strassman, Rick J

    2012-01-01

    Ayahuasca is a psychedelic brew originally used for magico-religious purposes by Amerindian populations of the western Amazon Basin. Throughout the last four decades, the use of ayahuasca spread towards major cities in all regions of Brazil and abroad. This trend has raised concerns that regular use of this N,N-dimethyltryptamine- and harmala-alkaloid-containing tea may lead to mental and physical health problems associated typically with drug abuse. To further elucidate the mental and physical health of ayahuasca users, we conducted a literature search in the international medical PubMed database. Inclusion criteria were evaluation of any related effect of ayahuasca use that occurred after the resolution of acute effects of the brew. Fifteen publications were related to emotional, cognitive, and physical health of ayahuasca users. The accumulated data suggest that ayahuasca use is safe and may even be, under certain conditions, beneficial. However, methodological bias of the reviewed studies might have contributed to the preponderance of beneficial effects and to the few adverse effects reported. The data up to now do not appear to allow for definitive conclusions to be drawn on the effects of ayahuasca use on mental and physical health, but some studies point in the direction of beneficial effects. Additional studies are suggested to provide further clarification. PMID:22761152

  2. GOCE User Toolbox and Tutorial

    NASA Astrophysics Data System (ADS)

    Knudsen, P.; Benveniste, J.

    2011-07-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. GUT has been developed in a collaboration within the GUT Core Group. The GUT Core Group: S. Dinardo, D. Serpe, B.M. Lucas, R. Floberghagen, A. Horvath (ESA), O. Andersen, M. Herceg (DTU), M.-H. Rio, S. Mulet, G. Larnicol (CLS), J. Johannessen, L.Bertino (NERSC), H. Snaith, P. Challenor (NOC), K. Haines, D. Bretherton (NCEO), C. Hughes (POL), R.J. Bingham (NU), G. Balmino, S. Niemeijer, I. Price, L. Cornejo (S&T), M. Diament, I Panet (IPGP), C.C. Tscherning (KU), D. Stammer, F. Siegismund (UH), T. Gruber (TUM),

  3. Body language user interface (BLUI)

    NASA Astrophysics Data System (ADS)

    Brody, Arthur W.; Olmsted, Coert

    1998-07-01

    We analyze a 3D skeletal representation of the user in spatial and temporal domains as a tool necessary to recognizing the gestures of drawing, picking and grabbing. The mechanisms of visual perception that are called upon in the imaginative process of artistic creation use those same tactile and kinesthetic pathways and structures in the brain which are employed when we manipulate the 3D world. We see, in fact, with our sensual bodies as well as with our eyes. Our interface is built on an analysis of pointing and gesturing and how they related to the perception of form in space. We report on our progress in implementing a body language user interface for artistic computer interaction, i.e., an human/computer interaction based on an analysis of how an artist uses her body in the act of creation. Using two synchronous TV cameras, we have videotaped an environment into which an artist moves, assumes a canonical (Da Vinci) pose and subsequently makes a series of simple gestures. The video images are processed to generate an animated 3D skeleton that corresponds to the skeleton of the artist. The locus of the path taken by the drawing hand is the source of a trace of particles. Our presentation shows the two simultaneous videos, the associated animated 3D skeleton, that skeleton as an instance of motion capture for a constrained model of a human skeleton and the trace of the path taken by the drawing hand.

  4. 2012 PATRIOT SCRIPT User's Guide

    SciTech Connect

    Cuellar, Leticia; Cleland, Timothy J.; Kubicek, Deborah A.; Mathis, Mark M.; Stroud, Phillip D.

    2012-05-31

    PATRIOT Script is an application that executes Patriot batch runs. This document provides a description of this application and how to run it. The basic user access tool PATRIOT Client allows a user to generate several most reliable paths in one run: one can specify a list of sources (origins) and targets, and PATRIOT finds for a given architecture option and one choice of device all the most reliable paths between all these sources and targets. The main objective of PATRIOT Script is to provide a tool for making automatic PATRIOT runs not only for a prespecified set of sources and targets, but also for a pre-specified set of devices and various architecture options. Running PATRIOT Script requires two basic steps that will be explained in more detail next: (1) Pre-preparation of an excel spreadsheet with the information about the desired runs; and (2) Opening the PATRIOT Script application, reading in the excel-spreadsheet and running the desired scenarios. Sections 1 and 2 explain each of these steps, and section 3 describes the output of the PATRIOT Script. For a detail description of the models and data behind PATRIOT and a detailed explanation of all the architecture options see [1]. For instructions of how to run PATRIOT Client see [2].

  5. Groundwater pumping by heterogeneous users

    NASA Astrophysics Data System (ADS)

    Saak, Alexander E.; Peterson, Jeffrey M.

    2012-08-01

    Farm size is a significant determinant of both groundwater-irrigated farm acreage and groundwater-irrigation-application rates per unit land area. This paper analyzes the patterns of groundwater exploitation when resource users in the area overlying a common aquifer are heterogeneous. In the presence of user heterogeneity, the common resource problem consists of inefficient dynamic and spatial allocation of groundwater because it impacts income distribution not only across periods but also across farmers. Under competitive allocation, smaller farmers pump groundwater faster if farmers have a constant marginal periodic utility of income. However, it is possible that larger farmers pump faster if the Arrow-Pratt coefficient of relative risk-aversion is sufficiently decreasing in income. A greater farm-size inequality may either moderate or amplify income inequality among farmers. Its effect on welfare depends on the curvature properties of the agricultural output function and the farmer utility of income. Also, it is shown that a flat-rate quota policy that limits the quantity of groundwater extraction per unit land area may have unintended consequences for the income distribution among farmers.

  6. RADTRAN/RADCAT user guide.

    SciTech Connect

    O'Donnell, Brandon M.; Hinojosa, Daniel; Weiner, Ruth F.; Heames, Terence John; Orcutt, David J.; Mills, George Scott

    2007-06-01

    RADTRAN is a program and code for calculating the risks of transporting radioactive materials. The first versions of the program, RADTRAN I and II, were developed for NUREG-0170 (USNRC, 1977), the first environmental impact statement on transportation of radioactive materials. RADTRAN and its associated software have undergone a number of improvements and advances consistent with improvements in computer technology.

  7. ITOUGH2 user`s guide version 2.2

    SciTech Connect

    Finsterle, S.

    1993-08-01

    ITOUGH2 is a program to estimate hydrogeologic model parameters for the numerical simulator TOUGH2. TOUGH2 was developed by Karsten Pruess at Lawrence Berkeley Laboratory for simulating non-isothermal flows of multicomponent, multiphase fluids in porous and fractured media. ITOUGH2 solves the inverse problem by automatic model calibration based on an indirect approach, in which some function of the difference between observed and model-predicted system response and appropriately weighted prior information about the parameters is minimized using standard optimization techniques. ITOUGH2 also provides a detailed error analysis of the estimated parameter set, and employs some procedures to study error propagation for prediction runs. This report includes a review of the inverse modeling theory, and a detailed description of the program architecture, input language, and the various user features provided by ITOUGH2. A sample problem is given to illustrate code application.

  8. The Chaco user`s guide. Version 1.0

    SciTech Connect

    Hendrickson, B.; Leland, R.

    1993-11-01

    Graph partitioning is a fundamental problem in many scientific settings. This document describes the capabilities and operation of Chaco, a software package designed to partition graphs. Chaco allows for recursive application of any of several different methods for finding small edge separators in weighted graphs. These methods include inertial, spectral, Kernighan-Lin and multilevel methods in addition to several simpler strategies. Each of these methods can be used to partition the graph into two, four or eight pieces at each level of recursion. In addition, the Kernighan-Lin method can be used to improve partitions generated by any of the other methods. Brief descriptions of these methods are provided, along with references to relevant literature. The user interface, input/output formats and appropriate settings for a variety of code parameters are discussed in detail, and some suggestions on algorithm selection are offered.

  9. Trajectory analysis and optimization system (TAOS) user`s manual

    SciTech Connect

    Salguero, D.E.

    1995-12-01

    The Trajectory Analysis and Optimization System (TAOS) is software that simulates point--mass trajectories for multiple vehicles. It expands upon the capabilities of the Trajectory Simulation and Analysis program (TAP) developed previously at Sandia National Laboratories. TAOS is designed to be a comprehensive analysis tool capable of analyzing nearly any type of three degree-of-freedom, point-mass trajectory. Trajectories are broken into segments, and within each segment, guidance rules provided by the user control how the trajectory is computed. Parametric optimization provides a powerful method for satisfying mission-planning constraints. Althrough TAOS is not interactive, its input and output files have been designed for ease of use. When compared to TAP, the capability to analyze trajectories for more than one vehicle is the primary enhancement, although numerous other small improvements have been made. This report documents the methods used in TAOS as well as the input and output file formats.

  10. Parallel community climate model: Description and user`s guide

    SciTech Connect

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H.

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  11. Novel autostereoscopic single-user displays with user interaction

    NASA Astrophysics Data System (ADS)

    Hopf, Klaus; Chojecki, Paul; Neumannn, Frank; Przewozny, David

    2006-10-01

    This paper describes recent advances in the field of autostereoscopic display development and introduces an appropriate integration of a novel user interaction technology. Beside technical aspects of the developed autostereoscopic display technology, the paper includes topics of our video-based interaction technique and introduces promising applications of autostereoscopic single user displays. Based on results of the European ATTEST project, the Fraunhofer Institute for Telecommunications (HHI) has developed the Free2C 3D display technology, which provides free positioning of a single viewer. The optics of the Free2C displays is designed such that extremely low crosstalk, excellent color reproduction and high brightness are achieved. Simple and intuitive interaction is a requirement for multi-modal 3D displays. For this reason, a novel technology has been integrated into the control console that can recognize a persons' hand and its gestures. Displayed 3D objects floating in front of the screen can be rotated by simple gestures and virtual buttons can be pressed by pointing at them (virtual 3D touch screen). Several applications are currently used by customers and have been presented at trade shows, exhibitions and showrooms. Feasible applications are based on computer generated content, live video created by stereoscopic cameras and films stored on hard disk. Immersive media presentations are one promising application for attractive stereoscopic representations. The Free2C Kiosk and the 3D Media Center combine a high-resolution autostereoscopic 3D display with a video-based hand-gesture recognition device for direct manipulation of virtual 3D objects floating in front of the screen.

  12. Cyclic material properties tests supporting elastic-plastic analysis development

    SciTech Connect

    Hodge, S.C.; Minicucci, J.M.

    1996-11-01

    Correlation studies have shown that hardening models currently available in the ABAQUS finite element code (isotropic, kinematic) do not accurately capture the inelastic strain reversals that occur due to structural rebounding from a rapidly applied transient dynamic load. The purpose of the Cyclic Material properties Test program was to obtain response data for the first several cycles of inelastic strain reversal from a cyclic properties test. This data is needed to develop elastic-plastic analysis methods that can accurately predict strains and permanent sets in structures due to rapidly applied transient dynamic loading. Test specimens were cycled at inelastic strain levels typical of rapidly applied transient dynamic analyses (0.5% to 4.0%). In addition to the inelastic response data, cyclic material properties for high yield strength (80 ksi) steel were determined including a cyclic stress-strain curve for a stabilized specimen. Two test methods, the Incremental Step method and the Companion specimen Method, were sued to determine cyclic properties. The incrementally decreasing strain amplitudes in the first loading block of the Incremental Step method test is representative of the response of structures subjected to rapidly applied transient dynamic loads. The inelastic strain history data generated by this test program will be used to support development of a material model that can accurately predict inelastic material behavior including inelastic strain reversals. Additionally, this data can be used to verify material model enhancements to elastic-plastic finite element analysis codes.

  13. How to Develop a User Interface That Your Real Users Will Love

    ERIC Educational Resources Information Center

    Phillips, Donald

    2012-01-01

    A "user interface" is the part of an interactive system that bridges the user and the underlying functionality of the system. But people sometimes forget that the best interfaces will provide a platform to optimize the users' interactions so that they support and extend the users' activities in effective, useful, and usable ways. To look at it…

  14. Cryptanalysis of an Improved User Authentication Scheme with User Anonymity for Wireless Communications

    NASA Astrophysics Data System (ADS)

    Yoon, Eun-Jun; Yoo, Kee-Young

    A user identity anonymity is an important property for roaming services. In 2011, Kang et al. proposed an improved user authentication scheme that guarantees user anonymity in wireless communications. This letter shows that Kang et al.'s improved scheme still cannot provide user anonymity as they claimed.

  15. Rotary engine performance computer program (RCEMAP and RCEMAPPC): User's guide

    NASA Technical Reports Server (NTRS)

    Bartrand, Timothy A.; Willis, Edward A.

    1993-01-01

    This report is a user's guide for a computer code that simulates the performance of several rotary combustion engine configurations. It is intended to assist prospective users in getting started with RCEMAP and/or RCEMAPPC. RCEMAP (Rotary Combustion Engine performance MAP generating code) is the mainframe version, while RCEMAPPC is a simplified subset designed for the personal computer, or PC, environment. Both versions are based on an open, zero-dimensional combustion system model for the prediction of instantaneous pressures, temperature, chemical composition and other in-chamber thermodynamic properties. Both versions predict overall engine performance and thermal characteristics, including bmep, bsfc, exhaust gas temperature, average material temperatures, and turbocharger operating conditions. Required inputs include engine geometry, materials, constants for use in the combustion heat release model, and turbomachinery maps. Illustrative examples and sample input files for both versions are included.

  16. Collaborative Filtering Recommendation on Users' Interest Sequences.

    PubMed

    Cheng, Weijie; Yin, Guisheng; Dong, Yuxin; Dong, Hongbin; Zhang, Wansong

    2016-01-01

    As an important factor for improving recommendations, time information has been introduced to model users' dynamic preferences in many papers. However, the sequence of users' behaviour is rarely studied in recommender systems. Due to the users' unique behavior evolution patterns and personalized interest transitions among items, users' similarity in sequential dimension should be introduced to further distinguish users' preferences and interests. In this paper, we propose a new collaborative filtering recommendation method based on users' interest sequences (IS) that rank users' ratings or other online behaviors according to the timestamps when they occurred. This method extracts the semantics hidden in the interest sequences by the length of users' longest common sub-IS (LCSIS) and the count of users' total common sub-IS (ACSIS). Then, these semantics are utilized to obtain users' IS-based similarities and, further, to refine the similarities acquired from traditional collaborative filtering approaches. With these updated similarities, transition characteristics and dynamic evolution patterns of users' preferences are considered. Our new proposed method was compared with state-of-the-art time-aware collaborative filtering algorithms on datasets MovieLens, Flixster and Ciao. The experimental results validate that the proposed recommendation method is effective and outperforms several existing algorithms in the accuracy of rating prediction. PMID:27195787

  17. Unifying access to services: ESO's user portal

    NASA Astrophysics Data System (ADS)

    Chavan, A. M.; Tacconi-Garman, L. E.; Peron, M.; Sogni, F.; Canavan, T.; Nass, P.

    2006-06-01

    The European Southern Observatory (ESO) is in the process of creating a central access point for all services offered to its user community via the Web. That gateway, called the User Portal, will provide registered users with a personalized set of service access points, the actual set depending on each user's privileges. Correspondence between users and ESO will take place by way of "profiles", that is, contact information. Each user may have several active profiles, so that an investigator may choose, for instance, whether their data should be delivered to their own address or to a collaborator. To application developers, the portal will offer authentication and authorization services, either via database queries or an LDAP server. The User Portal is being developed as a Web application using Java-based technology, including servlets and JSPs.

  18. Impaired Inhibitory Control in Recreational Cocaine Users

    PubMed Central

    Colzato, Lorenza S.; van den Wildenberg, Wery P. M.; Hommel, Bernhard

    2007-01-01

    Chronic use of cocaine is associated with impairment in response inhibition but it is an open question whether and to which degree findings from chronic users generalize to the upcoming type of recreational users. This study compared the ability to inhibit and execute behavioral responses in adult recreational users and in a cocaine-free-matched sample controlled for age, race, gender distribution, level of intelligence, and alcohol consumption. Response inhibition and response execution were measured by a stop-signal paradigm. Results show that users and non users are comparable in terms of response execution but users need significantly more time to inhibit responses to stop-signals than non users. Interestingly, the magnitude of the inhibitory deficit was positively correlated with the individuals lifetime cocaine exposure suggesting that the magnitude of the impairment is proportional to the degree of cocaine consumed. PMID:17989775

  19. Standards for the user interface - Developing a user consensus. [for Space Station Information System

    NASA Technical Reports Server (NTRS)

    Moe, Karen L.; Perkins, Dorothy C.; Szczur, Martha R.

    1987-01-01

    The user support environment (USE) which is a set of software tools for a flexible standard interactive user interface to the Space Station systems, platforms, and payloads is described in detail. Included in the USE concept are a user interface language, a run time environment and user interface management system, support tools, and standards for human interaction methods. The goals and challenges of the USE are discussed as well as a methodology based on prototype demonstrations for involving users in the process of validating the USE concepts. By prototyping the key concepts and salient features of the proposed user interface standards, the user's ability to respond is greatly enhanced.

  20. The numerical investigation of the material behavior of high strength sheet materials in incremental forming

    NASA Astrophysics Data System (ADS)

    Badr, Ossama Mamdouh; Rolfe, Bernard; Hodgson, Peter; Weiss, Matthias

    2013-05-01

    Springback is an inevitable phenomenon in sheet metal forming and has been found to reduce with an increasing number of forming steps. In this study the effect of incremental forming on springback is analyzed for DP780 steel. The cyclic hardening characteristics of the DP780 steel are determined by fitting the experimental moment curvature data of a cyclic pure bending test using Abaqus Standard. The change in elastic modulus with pre-strain is also considered in the material model. Using the developed material model a V- die forming process is numerically analyzed for single and multiple-step forming, and the effect on springback determined. The numerical results show that there is a reduction in springback with an increasing number of forming steps, and that this may be due to the plastic strain accumulated in the blank during the sequential loading steps in the bending region. A very good agreement has been achieved between the simulation and the experimental results. The present study seems to offer an effective approach to increase the accuracy of the springback prediction and provide a greater insight into the nature of the springback in the incremental forming process.

  1. Nuclear material shipment study

    SciTech Connect

    Shepherd, E.W.

    1980-01-01

    The Radioactive Material Transport Assessment Study is expected to provide a flexible set of capabilities and useful information to the public, industry and government users by using a system design to assure obtaining high quality data from selected industry sources at acceptable cost. It is expected that the shipping record approach coupled with an efficient sampling strategy will accomplish this. The study is also designed to yield analytical capabilities and statistical output to serve public, industry and government users. The information provided by the study will make a valuable contribution to environmental and accident risk assessment, policy development and operational planning and management activities.

  2. News about NHMFL user program.

    SciTech Connect

    Lacerda, A. H.

    2001-01-01

    For the past decade, ultrasound measurements have proven to be of great importance in the investigation of systems close to magnetic instabilities. Many interesting results can be found in thc literature (at reasonably high DC fields) dealing with systems presenting metamagnetic transitions where ultrasound measurenients provided important information regarding the electron-lattice coupling. The group Ketterson, Suslov, and Sarma has been the first in the United States to extend this technique to be used in pulsed magnets. Their report that follows describes experimental details of the technique and presents results regarding the lattice behavior around the 35 T metamagnetic transition of the heavy fermion compound URu,Si,. I am sure that many of you will find the article very interesting. We are working hard to make this technique available to the user community soon.

  3. EPIC/JANUS user's guide

    SciTech Connect

    Not Available

    1986-07-30

    EPIC/JANUS, the Energy Information Administration's (EIA) Publication and Interactive Composition System, is a software system the allows text, tables, halftones, and graphics to be combined interactively in a single document. In essence, it automates the entire process of composition and production of camera-ready copy. EPIC is a machine-independent document management and translation system developed by EIA. JANUS is an interactive document composition system which formats and typesets a document. This User's Guide provides complete information on how to use the EPIC/JANUS system. Included in the discussion are sections on getting started, the EPIC system and EIA Standard Text Codes, EPIC interactive commands, graphics in EPIC/JANUS, tables in EPIC/JANUS, EPIC Error messages, MVS and VM listings from EPIC/JANUS, using JANUS interactively, mathematical formula, and producing EPIC/JANUS publications through a displaywriter. Appendices contain a quick reference guide to text codes and text code examples. (DWL)

  4. Dataflow Design Tool: User's Manual

    NASA Technical Reports Server (NTRS)

    Jones, Robert L., III

    1996-01-01

    The Dataflow Design Tool is a software tool for selecting a multiprocessor scheduling solution for a class of computational problems. The problems of interest are those that can be described with a dataflow graph and are intended to be executed repetitively on a set of identical processors. Typical applications include signal processing and control law problems. The software tool implements graph-search algorithms and analysis techniques based on the dataflow paradigm. Dataflow analyses provided by the software are introduced and shown to effectively determine performance bounds, scheduling constraints, and resource requirements. The software tool provides performance optimization through the inclusion of artificial precedence constraints among the schedulable tasks. The user interface and tool capabilities are described. Examples are provided to demonstrate the analysis, scheduling, and optimization functions facilitated by the tool.

  5. User-centered ecotourism development.

    PubMed

    Talsma, L; Molenbroek, J F M

    2012-01-01

    The transfer of knowledge in an ecotourism project is never a one-way affair. An approach connected to bottom-up development is the submersion into another culture, while creating a new organizational structure. For co-creation, patterns that are often latent, such as leadership roles, the association with business, or even the color of education can be revealed by carefully facilitated brainstorms or workshops. Especially in countries with a different hierarchical structure, such as Indonesia compared to Holland, a careful analysis is needed before starting cooperation. Although a case is only a temporary view on a situation and not a guarantee for a truly sustainable system, the bottom-up approach tested has interesting starting points for an ecotourism system. Two cases were conducted in Bali, Indonesia, which resulted in guidelines on how to approach user-centered ecotourism development. PMID:22317034

  6. Lightning research: A user's lament

    NASA Technical Reports Server (NTRS)

    Golub, C. N.

    1984-01-01

    As a user of devices and procedures for lightning protection, the author is asking the lightning research community for cookbook recipes to help him solve his problems. He is lamenting that realistic devices are scarce and that his mission does not allow him the time nor the wherewithal to bridge the gap between research and applications. A few case histories are presented. In return for their help he is offering researchers a key to lightning technology--the use of the Eastern Test Range and its extensive resources as a proving ground for their experiment in the lightning capital of the United States. A current example is given--a joint lightning characterization project to take place there. Typical resources are listed.

  7. Funtools: FITS Users Need Tools

    NASA Astrophysics Data System (ADS)

    Mandel, Eric; Murray, Stephen S.; Roll, John

    2011-12-01

    Funtools is a "minimal buy-in" FITS library and utility package developed at the the High Energy Astrophysics Division of SAO. The Funtools library provides simplified access to a wide array of file types: standard astronomical FITS images and binary tables, raw arrays and binary event lists, and even tables of ASCII column data. A sophisticated region filtering library (compatible with ds9) filters images and tables using boolean operations between geometric shapes, support world coordinates, etc. Funtools also supports advanced capabilities such as optimized data searching using index files. Because Funtools consists of a library and a set of user programs, it is most appropriately built from source. Funtools has been ported to Solaris, Linux, LinuxPPC, SGI, Alpha OSF1, Mac OSX (darwin) and Windows 98/NT/2000/XP. Once the source code tar file is retrieved, Funtools can be built and installed easily using standard commands.

  8. Elemental ABAREX -- a user's manual.

    SciTech Connect

    Smith, A.B.

    1999-05-26

    ELEMENTAL ABAREX is an extended version of the spherical optical-statistical model code ABAREX, designed for the interpretation of neutron interactions with elemental targets consisting of up to ten isotopes. The contributions from each of the isotopes of the element are explicitly dealt with, and combined for comparison with the elemental observables. Calculations and statistical fitting of experimental data are considered. The code is written in FORTRAN-77 and arranged for use on the IBM-compatible personal computer (PC), but it should operate effectively on a number of other systems, particularly VAX/VMS and IBM work stations. Effort is taken to make the code user friendly. With this document a reasonably skilled individual should become fluent with the use of the code in a brief period of time.

  9. The HEASARC graphical user interface

    NASA Technical Reports Server (NTRS)

    White, N.; Barrett, P.; Jacobs, P.; Oneel, B.

    1992-01-01

    An OSF/Motif-based graphical user interface has been developed to facilitate the use of the database and data analysis software packages available from the High Energy Astrophysics Science Archive Research Center (HEASARC). It can also be used as an interface to other, similar, routines. A small number of tables are constructed to specify the possible commands and command parameters for a given set of analysis routines. These tables can be modified by a designer to affect the appearance of the interface screens. They can also be dynamically changed in response to parameter adjustments made while the underlying program is running. Additionally, a communication protocol has been designed so that the interface can operate locally or across a network. It is intended that this software be able to run on a variety of workstations and X terminals.

  10. User Privacy in RFID Networks

    NASA Astrophysics Data System (ADS)

    Singelée, Dave; Seys, Stefaan

    Wireless RFID networks are getting deployed at a rapid pace and have already entered the public space on a massive scale: public transport cards, the biometric passport, office ID tokens, customer loyalty cards, etc. Although RFID technology offers interesting services to customers and retailers, it could also endanger the privacy of the end-users. The lack of protection mechanisms being deployed could potentially result in a privacy leakage of personal data. Furthermore, there is the emerging threat of location privacy. In this paper, we will show some practical attack scenarios and illustrates some of them with cases that have received press coverage. We will present the main challenges of enhancing privacy in RFID networks and evaluate some solutions proposed in literature. The main advantages and shortcomings will be briefly discussed. Finally, we will give an overview of some academic and industrial research initiatives on RFID privacy.

  11. Multi-user investigation organizer

    NASA Technical Reports Server (NTRS)

    Keller, Richard M. (Inventor); Panontin, Tina L. (Inventor); Carvalho, Robert E. (Inventor); Sturken, Ian (Inventor); Williams, James F. (Inventor); Wolfe, Shawn R. (Inventor); Gawdiak, Yuri O. (Inventor)

    2009-01-01

    A system that allows a team of geographically dispersed users to collaboratively analyze a mishap event. The system includes a reconfigurable ontology, including instances that are related to and characterize the mishap, a semantic network that receives, indexes and stores, for retrieval, viewing and editing, the instances and links between the instances, a network browser interface for retrieving and viewing screens that present the instances and links to other instances and that allow editing thereof, and a rule-based inference engine, including a collection of rules associated with establishment of links between the instances. A possible conclusion arising from analysis of the mishap event may be characterized as one or more of: not a credible conclusion; an unlikely conclusion; a credible conclusion; conclusion needs analysis; conclusion needs supporting data; conclusion proposed to be closed; and an un-reviewed conclusion.

  12. A nonlinear, implicit, three-dimensional finite element code for solid and structural mechanics - User`s Manual

    SciTech Connect

    Maker, B.N.

    1995-04-14

    This report provides a user`s manual for NIKE3D, a fully implicit three-dimensional finite element code for analyzing the finite strain static and dynamic response of inelastic solids, shells, and beams. Spatial discretization is achieved by the use of 8-node solid elements, 2-node truss and beam elements, and 4-node membrane and shell elements. Over twenty constitutive models are available for representing a wide range of elastic, plastic, viscous, and thermally dependent material behavior. Contact-impact algorithms permit gaps, frictional sliding, and mesh discontinuities along material interfaces. Several nonlinear solution strategies are available, including Full-, Modified-, and Quasi-Newton methods. The resulting system of simultaneous linear equations is either solved iteratively by an element-by-element method, or directly by a factorization method, for which case bandwidth minimization is optional. Data may be stored either in or out of core memory to allow for large analyses.

  13. Advanced Test Reactor National Scientific User Facility Partnerships

    SciTech Connect

    Frances M. Marshall; Todd R. Allen; Jeff B. Benson; James I. Cole; Mary Catherine Thelen

    2012-03-01

    In 2007, the United States Department of Energy designated the Advanced Test Reactor (ATR), located at Idaho National Laboratory, as a National Scientific User Facility (NSUF). This designation made test space within the ATR and post-irradiation examination (PIE) equipment at INL available for use by researchers via a proposal and peer review process. The goal of the ATR NSUF is to provide researchers with the best ideas access to the most advanced test capability, regardless of the proposer's physical location. Since 2007, the ATR NSUF has expanded its available reactor test space, and obtained access to additional PIE equipment. Recognizing that INL may not have all the desired PIE equipment, or that some equipment may become oversubscribed, the ATR NSUF established a Partnership Program. This program enables and facilitates user access to several university and national laboratories. So far, seven universities and one national laboratory have been added to the ATR NSUF with capability that includes reactor-testing space, PIE equipment, and ion beam irradiation facilities. With the addition of these universities, irradiation can occur in multiple reactors and post-irradiation exams can be performed at multiple universities. In each case, the choice of facilities is based on the user's technical needs. Universities and laboratories included in the ATR NSUF partnership program are as follows: (1) Nuclear Services Laboratories at North Carolina State University; (2) PULSTAR Reactor Facility at North Carolina State University; (3) Michigan Ion Beam Laboratory (1.7 MV Tandetron accelerator) at the University of Michigan; (4) Irradiated Materials at the University of Michigan; (5) Harry Reid Center Radiochemistry Laboratories at University of Nevada, Las Vegas; (6) Characterization Laboratory for Irradiated Materials at the University of Wisconsin-Madison; (7) Tandem Accelerator Ion Beam. (1.7 MV terminal voltage tandem ion accelerator) at the University of Wisconsin

  14. Continuous user authentication using temporal information

    NASA Astrophysics Data System (ADS)

    Niinuma, Koichiro; Jain, Anil K.

    2010-04-01

    Conventional computer systems authenticate users only at the initial log-in session, which can be the cause of a critical security flaw. To resolve this problem, systems need continuous user authentication methods that continuously monitor and authenticate users based on some biometric trait(s). We propose a new method for continuous user authentication based on a Webcam that monitors a logged in user's face and color of clothing. Our method can authenticate users regardless of their posture in front of the workstation (laptop or PC). Previous methods for continuous user authentication cannot authenticate users without biometric observation. To alleviate this requirement, our method uses color information of users' clothing as an enrollment template in addition to their face information. The system cannot pre-register the clothing color information because this information is not permanent. To deal with the problem, our system automatically registers this information every time the user logs in and then fuses it with the conventional (password) identification system. We report preliminary authentication results and future enhancements to the proposed system.

  15. Simplified analytical model of penetration with lateral loading -- User`s guide

    SciTech Connect

    Young, C.W.

    1998-05-01

    The SAMPLL (Simplified Analytical Model of Penetration with Lateral Loading) computer code was originally developed in 1984 to realistically yet economically predict penetrator/target interactions. Since the code`s inception, its use has spread throughout the conventional and nuclear penetrating weapons community. During the penetrator/target interaction, the resistance of the material being penetrated imparts both lateral and axial loads on the penetrator. These loads cause changes to the penetrator`s motion (kinematics). SAMPLL uses empirically based algorithms, formulated from an extensive experimental data base, to replicate the loads the penetrator experiences during penetration. The lateral loads resulting from angle of attack and trajectory angle of the penetrator are explicitly treated in SAMPLL. The loads are summed and the kinematics calculated at each time step. SAMPLL has been continually improved, and the current version, Version 6.0, can handle cratering and spall effects, multiple target layers, penetrator damage/failure, and complex penetrator shapes. Version 6 uses the latest empirical penetration equations, and also automatically adjusts the penetrability index for certain target layers to account for layer thickness and confinement. This report describes the SAMPLL code, including assumptions and limitations, and includes a user`s guide.

  16. Thermostructural Analysis of Carbon Cloth Phenolic Material Tested at the Laser Hardened Material Evaluation Laboratory

    NASA Technical Reports Server (NTRS)

    Clayton, J. Louie; Ehle, Curt; Saxon, Jeff (Technical Monitor)

    2002-01-01

    RSRM nozzle liner components have been analyzed and tested to explore the occurrence of anomalous material performance known as pocketing erosion. Primary physical factors that contribute to pocketing seem to include the geometric permeability, which governs pore pressure magnitudes and hence load, and carbon fiber high temperature tensile strength, which defines a material limiting capability. The study reports on the results of a coupled thermostructural finite element analysis of Carbon Cloth Phenolic (CCP) material tested at the Laser Hardened Material Evaluation Laboratory (the LHMEL facility). Modeled test configurations will be limited to the special case of where temperature gradients are oriented perpendicular to the composite material ply angle. Analyses were conducted using a transient, one-dimensional flow/thermal finite element code that models pore pressure and temperature distributions and in an explicitly coupled formulation, passes this information to a 2-dimensional finite element structural model for determination of the stress/deformation behavior of the orthotropic fiber/matrix CCP. Pore pressures are generated by thermal decomposition of the phenolic resin which evolve as a multi-component gas phase which is partially trapped in the porous microstructure of the composite. The nature of resultant pressures are described by using the Darcy relationships which have been modified to permit a multi-specie mass and momentum balance including water vapor condensation. Solution to the conjugate flow/thermal equations were performed using the SINDA code. Of particular importance to this problem was the implementation of a char and deformation state dependent (geometric) permeability as describing a first order interaction between the flow/thermal and structural models. Material property models are used to characterize the solid phase mechanical stiffness and failure. Structural calculations were performed using the ABAQUS code. Iterations were made

  17. Ergonomic material-handling device

    DOEpatents

    Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

    2004-08-24

    A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

  18. STOMP Subsurface Transport Over Multiple Phases: User`s guide

    SciTech Connect

    White, M.D.; Oostrom, M.

    1997-10-01

    The U.S. Department of Energy, through the Office of Technology Development, has requested the demonstration of remediation technologies for the cleanup of volatile organic compounds and associated radionuclides within the soil and groundwater at arid sites. This demonstration program, called the VOC-Arid Soils Integrated Demonstration Program (Arid-ID), has been initially directed at a volume of unsaturated and saturated soil contaminated with carbon tetrachloride, on the Hanford Site near Richland, Washington. A principal subtask of the Arid-ID program involves the development of an integrated engineering simulator for evaluating the effectiveness and efficiency of various remediation technologies. The engineering simulator`s intended users include scientists and engineers who are investigating soil physics phenomena associated with remediation technologies. Principal design goals for the engineer simulator include broad applicability, verified algorithms, quality assurance controls, and validated simulations against laboratory and field-scale experiments. An important goal for the simulator development subtask involves the ability to scale laboratory and field-scale experiments to full-scale remediation technologies, and to transfer acquired technology to other arid sites. The STOMP (Subsurface Transport Over Multiple Phases) simulator has been developed by the Pacific Northwest National Laboratory for modeling remediation technologies. Information on the use, application, and theoretical basis of the STOMP simulator theory and discussions on the governing equations, constitutive relations, and numerical solution algorithms for the STOMP simulator.

  19. PHASER user`s manual version 2.10

    SciTech Connect

    Roginski, R.J.

    1996-09-01

    PHASER (Probabilistic Hybrid Analytical System Evaluation Routine) is a computer code for solving the top event probability of a system fault tree. It has the capability for easy migration of individual basic event probabilities from a zero-{open_quotes}scale{close_quotes}-factor (completely subjective) state to one in which the analyst has total knowledge (completely stochastic) about each basic event. The code implements a fuzzy algebra solution for subjective data, a probabilistic solution for stochastic data, and a hybrid mathematics solution for data that are partly subjective and partly stochastic. Events that are not completely subjective or completely stochastic are hybrid events and are internally handled as such. The stochastic and fuzzy ranges of uncertainty in the top event probability are also computed for the analyst. These are provided in the form of a fuzzy function for the subjective uncertainty, a probability density function (PDF) for the stochastic variability, and the overall {open_quotes}confidence{close_quotes} factors for the two constituents of uncertainty, giving a complete hybrid result. PHASER interfaces with other Sandia codes (SABLE, LHS and LHSPOST) to assist the user in determining cutsets, and to compute probability density functions.

  20. CHEETAH 1.0 user`s manual

    SciTech Connect

    Fried, L.E.

    1994-06-24

    CHEETAH is an effort to bring the TIGER thermochemical code into the 1990s. A wide variety of improvements have been made in Version 1.0, and a host of others will be implemented in the future. In CHEETAH 1.0 I have improved the robustness and ease of use of TIGER. All of TIGER`s solvers have been replaced by new algorithms. I find that CHEETAH solves a wider variety of problems with no user intervention (e.g. no guesses for the C-J state) than TIGER did. CHEETAH has been made simpler to use than TIGER; typical use of the code occurs with the new standard run command. I hope that CHEETAH makes the use of thermochemical codes more attractive to practical explosive formulators. In the future I plan to improve the underlying science in CHEETAH. More accurate equations of state will be used in the gas and the condensed phase. A kinetics capability will be added to the code that will predict reaction zone thickness. CHEETAH is currently a numerical implementation of C-J theory. It will,become an implementation of ZND theory. Further ease of use features will eventually be added; an automatic formulator that adjusts concentrations to match desired properties is planned.

  1. User's Manual for the Object User Interface (OUI): An Environmental Resource Modeling Framework

    USGS Publications Warehouse

    Markstrom, Steven L.; Koczot, Kathryn M.

    2008-01-01

    The Object User Interface is a computer application that provides a framework for coupling environmental-resource models and for managing associated temporal and spatial data. The Object User Interface is designed to be easily extensible to incorporate models and data interfaces defined by the user. Additionally, the Object User Interface is highly configurable through the use of a user-modifiable, text-based control file that is written in the eXtensible Markup Language. The Object User Interface user's manual provides (1) installation instructions, (2) an overview of the graphical user interface, (3) a description of the software tools, (4) a project example, and (5) specifications for user configuration and extension.

  2. Profiling users in the UNIX os environment

    SciTech Connect

    Dao, V N P; Vemuri, R; Templeton, S J

    2000-09-29

    This paper presents results obtained by using a method of profiling a user based on the login host, the login time, the command set, and the command set execution time of the profiled user. It is assumed that the user is logging onto a UNIX host on a computer network. The paper concentrates on two areas: short-term and long-term profiling. In short-term profiling the focus is on profiling the user at a given session where user characteristics do not change much. In long-term profiling, the duration of observation is over a much longer period of time. The latter is more challenging because of a phenomenon called concept or profile drift. Profile drift occurs when a user logs onto a host for an extended period of time (over several sessions).

  3. User's manual for MacPASCO

    NASA Technical Reports Server (NTRS)

    Lucas, S. H.; Davis, R. C.

    1992-01-01

    A user's manual is presented for MacPASCO, which is an interactive, graphic, preprocessor for panel design. MacPASCO creates input for PASCO, an existing computer code for structural analysis and sizing of longitudinally stiffened composite panels. MacPASCO provides a graphical user interface which simplifies the specification of panel geometry and reduces user input errors. The user draws the initial structural geometry and reduces user input errors. The user draws the initial structural geometry on the computer screen, then uses a combination of graphic and text inputs to: refine the structural geometry; specify information required for analysis such as panel load and boundary conditions; and define design variables and constraints for minimum mass optimization. Only the use of MacPASCO is described, since the use of PASCO has been documented elsewhere.

  4. Let your users do the ranking.

    SciTech Connect

    Spomer, Judith E.

    2010-12-01

    Ranking search results is a thorny issue for enterprise search. Search engines rank results using a variety of sophisticated algorithms, but users still complain that search can't ever seem to find anything useful or relevant! The challenge is to provide results that are ranked according to the users' definition of relevancy. Sandia National Laboratories has enhanced its commercial search engine to discover user preferences, re-ranking results accordingly. Immediate positive impact was achieved by modeling historical data consisting of user queries and subsequent result clicks. New data is incorporated into the model daily. An important benefit is that results improve naturally and automatically over time as a function of user actions. This session presents the method employed, how it was integrated with the search engine,metrics illustrating the subsequent improvement to the users' search experience, and plans for implementation with Sandia's FAST for SharePoint 2010 search engine.

  5. The USER: Utilizing Scientific Environments for Research

    NASA Astrophysics Data System (ADS)

    Walker, Lakeisha

    A lot of hard work goes into submitting a proposal for access to equipment in our nation's top science research facilities. It seems the biggest focus for a facility USER should be on the acceptance of the proposal, however, the job of a facility USER actually begins after the acceptance letter arrives. In order to make the most of the Awarded experiment time and cultivate collaborations for the future, facility USERs need to look beyond the proposal. From experiment scheduling to arrival to data analysis the entire USER experience is valuable and worth doing well. This presentation will discuss best practices for facility USERs and highlight successful USER collaborations at ORNL's High Flux Isotope Reactor. Funded by the Office of Basic Energy Sciences, U.S. DOE. ORNL is managed by UT-Battelle, LLC for US DOE.

  6. Information filtering via collaborative user clustering modeling

    NASA Astrophysics Data System (ADS)

    Zhang, Chu-Xu; Zhang, Zi-Ke; Yu, Lu; Liu, Chuang; Liu, Hao; Yan, Xiao-Yong

    2014-02-01

    The past few years have witnessed the great success of recommender systems, which can significantly help users to find out personalized items for them from the information era. One of the widest applied recommendation methods is the Matrix Factorization (MF). However, most of the researches on this topic have focused on mining the direct relationships between users and items. In this paper, we optimize the standard MF by integrating the user clustering regularization term. Our model considers not only the user-item rating information but also the user information. In addition, we compared the proposed model with three typical other methods: User-Mean (UM), Item-Mean (IM) and standard MF. Experimental results on two real-world datasets, MovieLens 1M and MovieLens 100k, show that our method performs better than other three methods in the accuracy of recommendation.

  7. CMGTooL user's manual

    USGS Publications Warehouse

    Xu, Jingping; Lightsom, Fran; Noble, Marlene A.; Denham, Charles

    2002-01-01

    During the past several years, the sediment transport group in the Coastal and Marine Geology Program (CMGP) of the U. S. Geological Survey has made major revisions to its methodology of processing, analyzing, and maintaining the variety of oceanographic time-series data. First, CMGP completed the transition of the its oceanographic time-series database to a self-documenting NetCDF (Rew et al., 1997) data format. Second, CMGP’s oceanographic data variety and complexity have been greatly expanded from traditional 2-dimensional, single-point time-series measurements (e.g., Electro-magnetic current meters, transmissometers) to more advanced 3-dimensional and profiling time-series measurements due to many new acquisitions of modern instruments such as Acoustic Doppler Current Profiler (RDI, 1996), Acoustic Doppler Velocitimeter, Pulse-Coherence Acoustic Doppler Profiler (SonTek, 2001), Acoustic Bacscatter Sensor (Aquatec, 1001001001001001001). In order to accommodate the NetCDF format of data from the new instruments, a software package of processing, analyzing, and visualizing time-series oceanographic data was developed. It is named CMGTooL. The CMGTooL package contains two basic components: a user-friendly GUI for NetCDF file analysis, processing and manipulation; and a data analyzing program library. Most of the routines in the library are stand-alone programs suitable for batch processing. CMGTooL is written in MATLAB computing language (The Mathworks, 1997), therefore users must have MATLAB installed on their computer in order to use this software package. In addition, MATLAB’s Signal Processing Toolbox is also required by some CMGTooL’s routines. Like most MATLAB programs, all CMGTooL codes are compatible with different computing platforms including PC, MAC, and UNIX machines (Note: CMGTooL has been tested on different platforms that run MATLAB 5.2 (Release 10) or lower versions. Some of the commands related to MAC may not be compatible with later releases

  8. Lunar Regolith Simulant User's Guide

    NASA Technical Reports Server (NTRS)

    Schrader, C. M.; Rickman, D. L.; McLemore, C. A.; Fikes, J. C.

    2010-01-01

    Based on primary characteristics, currently or recently available lunar regolith simulants are discussed from the perspective of potential experimental uses. The characteristics used are inherent properties of the material rather than their responses to behavioral (geomechanical, physiochemical, etc.) tests. We define these inherent or primary properties to be particle composition, particle size distribution, particle shape distribution, and bulk density. Comparable information about lunar materials is also provided. It is strongly emphasized that anyone considering either choosing or using a simulant should contact one of the members of the simulant program listed at the end of this document.

  9. NASA scientific and technical program: User survey

    NASA Technical Reports Server (NTRS)

    Hunter, Judy F.; Shockley, Cynthia W.

    1993-01-01

    Results are presented of an intensive user requirements survey conducted by NASA's Scientific and Technical Information (STI) Program with the goal of improving the foundation for the user outreach program. The survey was carried out by interviewing 550 NASA scientists, engineers, and contractors and by analyzing 650 individual responses to a mailed out questionnaire. To analyze the user demographic data, a data base was built and used, and will be applied to ongoing analysis by the NASA STI Program.

  10. NASA Scientific and Technical Program - User survey

    NASA Technical Reports Server (NTRS)

    Hunter, Judy F.; Shockley, Cynthia W.

    1993-01-01

    Results are presented of an intensive user requirements survey conducted by NASA's Scientific and Technical Information (STI) Program with the goal of improving the foundation for the user outreach program. The survey was carried out by interviewing 550 NASA scientists, engineers, and contractors and by analyzing 650 individual responses to a mailed out questionnaire. To analyze the user demographic data, a data base was built and used, and will be applied to ongoing analysis by the NASA STI Program.

  11. STS ancillary equipment study. User reference book

    NASA Technical Reports Server (NTRS)

    Plough, J. A.

    1977-01-01

    A record of what is currently known about STS ancillary equipment is presented in this user-oriented design so that a potential user may evaluate whether he could use the described ancillary equipment or if he would need to design and fabricate a payload-unique item. References that the user can use to obtain additional details and requirements to aid in his evaluation and decision are included.

  12. Micromechanical combined stress analysis: MICSTRAN, a user manual

    NASA Technical Reports Server (NTRS)

    Naik, R. A.

    1992-01-01

    Composite materials are currently being used in aerospace and other applications. The ability to tailor the composite properties by the appropriate selection of its constituents, the fiber and matrix, is a major advantage of composite materials. The Micromechanical Combined Stress Analysis (MICSTRAN) code provides the materials engineer with a user-friendly personal computer (PC) based tool to calculate overall composite properties given the constituent fiber and matrix properties. To assess the ability of the composite to carry structural loads, the materials engineer also needs to calculate the internal stresses in the composite material. MICSTRAN is a simple tool to calculate such internal stresses with a composite ply under combined thermomechanical loading. It assumes that the fibers have a circular cross-section and are arranged either in a repeating square or diamond array pattern within a ply. It uses a classical elasticity solution technique that has been demonstrated to calculate accurate stress results. Input to the program consists of transversely isotropic fiber properties and isotropic matrix properties such as moduli, Poisson's ratios, coefficients of thermal expansion, and volume fraction. Output consists of overall thermoelastic constants and stresses. Stresses can be computed under the combined action of thermal, transverse, longitudinal, transverse shear, and longitudinal shear loadings. Stress output can be requested along the fiber-matrix interface, the model boundaries, circular arcs, or at user-specified points located anywhere in the model. The MICSTRAN program is Windows compatible and takes advantage of the Microsoft Windows graphical user interface which facilitates multitasking and extends memory access far beyond the limits imposed by the DOS operating system.

  13. User involvement in IPAD software development

    NASA Technical Reports Server (NTRS)

    Bryant, W. A.; Crowell, H. A.

    1980-01-01

    The extensive user involvement in the software development of IPAD and the functionality of the IPAD prototype as viewed by the user are addressed. Although not a production system that can support an ongoing design process, the IPAD prototype is useful for the potential user as well as the interested system designer and is an essential tool for the companies committed to the use of the IPAD system. User refers to the engineer or manager responsible for the design, manufacture, or maintenance of a product, together with those supporting these functions.

  14. User's manual for the Gaussian windows program

    NASA Technical Reports Server (NTRS)

    Jaeckel, Louis A.

    1992-01-01

    'Gaussian Windows' is a method for exploring a set of multivariate data, in order to estimate the shape of the underlying density function. The method can be used to find and describe structural features in the data. The method is described in two earlier papers. I assume that the reader has access to both of these papers, so I will not repeat material from them. The program described herein is written in BASIC and it runs on an IBM PC or PS/2 with the DOS 3.3 operating system. Although the program is slow and has limited memory space, it is adequate for experimenting with the method. Since it is written in BASIC, it is relatively easy to modify. The program and some related files are available on a 3-inch diskette. A listing of the program is also available. This user's manual explains the use of the program. First, it gives a brief tutorial, illustrating some of the program's features with a set of artificial data. Then, it describes the results displayed after the program does a Gaussian window, and it explains each of the items on the various menus.

  15. Graphical user interface for AMOS and POISSON

    SciTech Connect

    Swatloski, T.L.

    1993-03-02

    A graphical user interface (GUI) exists for building model geometry for the time-domain field code, AMOS. This GUI has recently been modified to build models and display the results of the Poisson electrostatic solver maintained by the Los Alamos Accelerator Code Group called POISSON. Included in the GUI is a 2-D graphic editor allowing interactive construction of the model geometry. Polygons may be created by entering points with the mouse, with text input, or by reading coordinates from a file. Circular arcs have recently been added. Once polygons are entered, points may be inserted, moved, or deleted. Materials can be assigned to polygons, and are represented by different colors. The unit scale may be adjusted as well as the viewport. A rectangular mesh may be generated for AMOS or a triangular mesh for POISSON. Potentials from POISSON are represented with a contour plot and the designer is able to mouse click anywhere on the model to display the potential value at that location. This was developed under the X windowing system using the Motif look and feel.

  16. Vision as a user interface

    NASA Astrophysics Data System (ADS)

    Koenderink, Jan

    2011-03-01

    The egg-rolling behavior of the graylag goose is an often quoted example of a fixed-action pattern. The bird will even attempt to roll a brick back to its nest! Despite excellent visual acuity it apparently takes a brick for an egg." Evolution optimizes utility, not veridicality. Yet textbooks take it for a fact that human vision evolved so as to approach veridical perception. How do humans manage to dodge the laws of evolution? I will show that they don't, but that human vision is an idiosyncratic user interface. By way of an example I consider the case of pictorial perception. Gleaning information from still images is an important human ability and is likely to remain so for the foreseeable future. I will discuss a number of instances of extreme non-veridicality and huge inter-observer variability. Despite their importance in applications (information dissemination, personnel selection,...) such huge effects have remained undocumented in the literature, although they can be traced to artistic conventions. The reason appears to be that conventional psychophysics-by design-fails to address the qualitative, that is the meaningful, aspects of visual awareness whereas this is the very target of the visual arts.

  17. MEANS User Documentation. Appendix A

    NASA Technical Reports Server (NTRS)

    Melconian, Terran

    2004-01-01

    MEANS is an acronym for the MIT Extensible Air Network Simulation. MIT is the Massachusetts Institute of Technology, where MEANS was developed. MEANS models the flow of aircraft in a simulation of the US National Airspace System. It can optionally follow the flow of passengers as well. The flight model takes the form of several queues through which the aircraft pass, as well as delays at certain times; the passengers can be transported via flights. MEANS is an event-based model. This means that events are scheduled at some point in the future, and once an event has executed, the simulation t h e advances to that of the next event. This is a different approach than some simulations (particularly those of physical systems), where time is advanced in fixed increments and the state of the system is updated at each step.This documentation is a "user guide" for MEANS - it describes how to USE means, not write new modules. For programming instructions, see the programming documentation, available as a separate document.This document assumse no programming knowledge. It will describe how to run MEANS, understand the data formats, and use such utility programs as already exist. For more detailed information on the internal workings of MEANS, and how to programmatically add to it, refer to the programming documentation.

  18. Task 7: ADPAC User's Manual

    NASA Technical Reports Server (NTRS)

    Hall, E. J.; Topp, D. A.; Delaney, R. A.

    1996-01-01

    The overall objective of this study was to develop a 3-D numerical analysis for compressor casing treatment flowfields. The current version of the computer code resulting from this study is referred to as ADPAC (Advanced Ducted Propfan Analysis Codes-Version 7). This report is intended to serve as a computer program user's manual for the ADPAC code developed under Tasks 6 and 7 of the NASA Contract. The ADPAC program is based on a flexible multiple- block grid discretization scheme permitting coupled 2-D/3-D mesh block solutions with application to a wide variety of geometries. Aerodynamic calculations are based on a four-stage Runge-Kutta time-marching finite volume solution technique with added numerical dissipation. Steady flow predictions are accelerated by a multigrid procedure. An iterative implicit algorithm is available for rapid time-dependent flow calculations, and an advanced two equation turbulence model is incorporated to predict complex turbulent flows. The consolidated code generated during this study is capable of executing in either a serial or parallel computing mode from a single source code. Numerous examples are given in the form of test cases to demonstrate the utility of this approach for predicting the aerodynamics of modem turbomachinery configurations.

  19. Software reuse environment user's guide

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This document describes the services provided by the prototype Software Reuse Environment, which was developed by CTA for NASA Goddard Space Flight Center, Code 520. This is one of three guides delivered by CTA as part of the environment. The other two guides are: Software Generation and Installation Guide; and SEMANTX--Defining the Schema. The Software Generation and Installation Guide describes the software source modules that make up the Reuse Environment, with instructions on how to generate and install an executable system from the source code. SEMANTX--Defining the Schema describes how a reuse database is created. Actually this guide is more general than the reuse database, as it describes how to generate a SEMANTX database. SEMANTX is an off-the-shelf tool that we have used to implement the reuse database. It is a product of Semantyk Systems, Inc. The Software Reuse Environment is built upon SEMANTX as well as on the IDE Structured Analysis Integrated Environment. (IDE is Interactive Development Environments, Inc.) SEMANTX itself is built on top of the Unify Database Management System. To use the Software Reuse Environment you should have the User's Manuals for SEMANTX, for Unify, and for the IDE software. CTA has provided all of these with the environment.

  20. Vegetation Change Analysis User's Manual

    SciTech Connect

    D. J. Hansen; W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Diagnostic techniques are needed to identify thresholds of sustainable military use. A cooperative effort among U.S. Department of Energy, U.S. Department of Defense, and selected university scientists was undertaken to focus on developing new techniques for monitoring and mitigating military impacts in arid lands. This manual focuses on the development of new monitoring techniques that have been implemented at Fort Irwin, California. New mitigation techniques are described in a separate companion manual. This User's Manual is designed to address diagnostic capabilities needed to distinguish between various degrees of sustainable and nonsustainable impacts due to military training and testing and habitat-disturbing activities in desert ecosystems. Techniques described here focus on the use of high-resolution imagery and the application of image-processing techniques developed primarily for medical research. A discussion is provided about the measurement of plant biomass and shrub canopy cover in arid. lands using conventional methods. Both semiquantitative methods and quantitative methods are discussed and reference to current literature is provided. A background about the use of digital imagery to measure vegetation is presented.

  1. Numerical simulation of damage evolution for ductile materials and mechanical properties study

    NASA Astrophysics Data System (ADS)

    El Amri, A.; Hanafi, I.; Haddou, M. E. Y.; Khamlichi, A.

    2015-12-01

    This paper presents results of a numerical modelling of ductile fracture and failure of elements made of 5182H111 aluminium alloys subjected to dynamic traction. The analysis was performed using Johnson-Cook model based on ABAQUS software. The modelling difficulty related to prediction of ductile fracture mainly arises because there is a tremendous span of length scales from the structural problem to the micro-mechanics problem governing the material separation process. This study has been used the experimental results to calibrate a simple crack propagation criteria for shell elements of which one has often been used in practical analyses. The performance of the proposed model is in general good and it is believed that the presented results and experimental-numerical calibration procedure can be of use in practical finite-element simulations.

  2. Which Users Should Be the Focus of Mobile Personal Health Records? Analysis of User Characteristics Influencing Usage of a Tethered Mobile Personal Health Record

    PubMed Central

    Lee, Guna; Park, Joong Yeol; Shin, Soo-Yong; Hwang, Jong Su; Ryu, Hyeon Jeong; Bates, David W.

    2016-01-01

    Abstract Background: This study was conducted to analyze the usage pattern of a hospital-tethered mobile personal health records (m-PHRs) application named My Chart in My Hand (MCMH) and to identify user characteristics that influence m-PHR usage. Materials and Methods: Access logs to MCMH and its menus were collected for a total of 18 months, from August 2011 to January 2013. Usage patterns between users without a patient identification number (ID) and users with a patient ID were compared. Users with a patient ID were divided into light and heavy user groups by the median number of monthly access. Multiple linear regression models were used to assess MCMH usage pattern by characteristics of MCMH user with a patient ID. Results: The total number of MCMH logins was 105,603, and the median number of accesses was 15 times. Users (n = 7,096) mostly accessed the “My Chart” menu, but “OPD [outpatient department] Service Support” and “Health Management” menus were also frequently used. Patients with chronic diseases, experience of hospital visits including emergency room and OPD, and age group of 0–19 years were more frequently found among users with a patient ID (n = 2,186) (p < 0.001). A similar trend was found in the heavy user group (n = 1,123). Submenus of laboratory result, online appointment, and medication lists that were accessed mostly by users with a patient ID were associated with OPD visit and chronic diseases. Conclusions: This study showed that focuses on patients with chronic disease and more hospital visits and empowerment functions in a tethered m-PHR would be helpful to pursue the extensive use. PMID:26447775

  3. Shock Wave Propagation in Cementitious Materials at Micro/Meso Scales

    NASA Astrophysics Data System (ADS)

    Rajendran, Arunachalam

    2015-06-01

    The mechanical and constitutive response of materials like cement, and bio materials like fish scale and abalone shell is very complex due to heterogeneities that are inherently present in the nano and microstructures. The intrinsic constitutive behaviors are driven by the chemical composition and the molecular, micro, and meso structures. Therefore, it becomes important to identify the material genome as the building block for the material. For instance, in cementitious materials, the genome of C-S-H phase (the glue or the paste) that holds the various clinkers, such as the dicalcium silicate, tricalcium silicate, calcium ferroaluminates, and others is extremely complex. Often mechanical behaviors of C-S-H type materials are influenced by the chemistry and the structures at all nano to micro length scales. By explicitly modeling the molecular structures using appropriate potentials, it is then possible to compute the elastic tensor from molecular dynamics simulations using all atom method. The elastic tensors for the C-S-H gel and other clinkers are determined using the software suite ``Accelrys Materials Studio.'' A strain rate dependent, fracture mechanics based tensile damage model has been incorporated into ABAQUS finite element code to model spall evolution in the heterogeneous cementitious material with all constituents explicitly modeled through one micron element resolution. This paper presents results from nano/micro/meso scale analyses of shock wave propagation in a heterogeneous cementitious material using both molecular dynamic and finite element codes.

  4. Experimental investigations and numerical simulations of notch effect in cellular plastic materials

    NASA Astrophysics Data System (ADS)

    Marsavina, L.; Linul, E.; Voiconi, T.; Negru, R.

    2016-04-01

    Cellular plastics are light weight structures with many applications in civil, aeronautical, automotive and mechanical engineering. Properties of cellular materials depend on the properties of the solid material, on the shape and dimensions of the cellular structure and on the relative density of the cellular material. Most of cellular plastic materials are crushing in compression and have a brittle behavior in tension. The effect of notches represents an important issue in such materials, taking into account that for packing applications for example, notches/holes should be introduced in the cellular material. This paper investigates the effect of notches in compression for three different densities 100, 145 and 300 kg/m3 polyurethane (PUR) foams. Experimental investigations were performed on rectangular blocks of 100×100×25 mm with 16, 28 and 40 mm central holes. The mechanism of damage was monitored with an IR camera FLIR A40M. Purpose of the numerical simulations was to calibrate a material model, based on compression test for un-notched specimens using the CRUSHABLE FOAM models implemented in ABAQUS SIMULIA. Then the material models were used to simulate the experimental tests on notched blocks. Good agreement was obtained for the load - displacement curves obtained experimentally and from simulation. Also the plastic deformation patterns observed experimentally by IR thermograpghy were obtained numerically using the CRUSHABLE FOAM material model.

  5. Reinventing User Applications for Mission Control

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip; Crocker, Alan R.

    2010-01-01

    In 2006, NASA Ames Research Center's (ARC) Intelligent Systems Division, and NASA Johnson Space Centers (JSC) Mission Operations Directorate (MOD) began a collaboration to move user applications for JSC's mission control center to a new software architecture, intended to replace the existing user applications being used for the Space Shuttle and the International Space Station. It must also carry NASA/JSC mission operations forward to the future, meeting the needs for NASA's exploration programs beyond low Earth orbit. Key requirements for the new architecture, called Mission Control Technologies (MCT) are that end users must be able to compose and build their own software displays without the need for programming, or direct support and approval from a platform services organization. Developers must be able to build MCT components using industry standard languages and tools. Each component of MCT must be interoperable with other components, regardless of what organization develops them. For platform service providers and MOD management, MCT must be cost effective, maintainable and evolvable. MCT software is built from components that are presented to users as composable user objects. A user object is an entity that represents a domain object such as a telemetry point, a command, a timeline, an activity, or a step in a procedure. User objects may be composed and reused, for example a telemetry point may be used in a traditional monitoring display, and that same telemetry user object may be composed into a procedure step. In either display, that same telemetry point may be shown in different views, such as a plot, an alpha numeric, or a meta-data view and those views may be changed live and in place. MCT presents users with a single unified user environment that contains all the objects required to perform applicable flight controller tasks, thus users do not have to use multiple applications, the traditional boundaries that exist between multiple heterogeneous

  6. User Facilities of the Office of Basic Energy Sciences: A National Resource for Scientific Research

    SciTech Connect

    2009-01-01

    The BES user facilities provide open access to specialized instrumentation and expertise that enable scientific users from universities, national laboratories, and industry to carry out experiments and develop theories that could not be done at their home institutions. These forefront research facilities require resource commitments well beyond the scope of any non-government institution and open up otherwise inaccessible facets of Nature to scientific inquiry. For approved, peer-reviewed projects, instrument time is available without charge to researchers who intend to publish their results in the open literature. These large-scale user facilities have made significant contributions to various scientific fields, including chemistry, physics, geology, materials science, environmental science, biology, and biomedical science. Over 16,000 scientists and engineers.pdf file (27KB) conduct experiments at BES user facilities annually. Thousands of other researchers collaborate with these users and analyze the data measured at the facilities to publish new scientific findings in peer-reviewed journals.

  7. Comparing composite materials with structural steels in the design of the optical support structure of very large telescopes

    NASA Astrophysics Data System (ADS)

    Cheng, Andrew Y.; Li, Robert K.

    1992-03-01

    The method of finite element analysis is used to study some candidate composite materials: carbon filter reinforced epoxy and glass fiber reinforced epoxy. These composites may have real applications in the design of the optical support structures of very large telescopes where stringent thermomechanical stability are needed. The lightweight property of these materials allows one to build very stiff members for the optical support to withstand the structural deflections due to wind, vibration, and gravity. We have run finite element models of these composites using ABAQUS on a VAX VMS computer. Simple beams with rectangular cross- sections were computed for the composites with structural steel as a comparison. The static properties of these beams were studied.

  8. 'It's your life!': injecting drug users, individual responsibility and hepatitis C prevention.

    PubMed

    Fraser, Suzanne

    2004-04-01

    Health promotion materials on hepatitis C prevention and safe injecting enjoin injecting drug users to produce ethical selves through relatively rigid social and hygiene-related conduct. This article examines a sample of safe injecting and hepatitis C prevention health promotion materials, and interview data gathered from injecting drug users, to consider the ways in which the notion of individual responsibility functions within them. I argue that the primacy of the individual in western culture is indeed reflected in hepatitis C and safe injecting materials and, that for a range of reasons, injecting drug users also make use of notions of individual responsibility. The article concludes by considering the social and health implications of this individualist approach to injecting drug use and health promotion, and by suggesting ways in which effective materials which do not focus solely on the individual can be created. PMID:15068637

  9. NOAA Climate Users Engagement Using Training Activities

    NASA Astrophysics Data System (ADS)

    Timofeyeva, M. M.; Verdin, J. P.; Jones, J.; Pulwarty, R. S.

    2009-12-01

    NOAA National Weather Service (NWS) Climate Services Training Program was initiated in 2001. The training original target audience was NOAA NWS regional and local climate services workforce. As a result of eight-year-long development of the training program, NWS offers two training courses and about 25 online distance learning modules covering various climate topics: climate data and observations, climate variability and change, NWS national and local climate products, their tools, skill, and interpretation. Leveraging climate information and expertise available at all NOAA line offices and partners allows delivery of the most relevant, advanced knowledge and is a very critical aspect of the training program. In 2009 the training program launched a pilot project that expanded the training opportunities for specific user groups. The California Department of Water Resources (DWR) requested a training course with emphasis on Climate, Drought and Remote Sensing for their water resources managers, hydrologists, and engineering staff. The National Integrated Drought Information System (NIDIS) co-sponsored the project. Developing the course NOAA, NIDIS, and DWR staff worked together testing different approaches in order to identify the most appropriate balance between gaps in the target audience climate knowledge and technical level needed for the information communication and delivery. The two-day course was offered in June 2009 for 35 trainees with classroom recording for further dissemination of the training materials in form of online audio-visual presentations (webcasts). The training event brought together NOAA staff and partners from U.S. Geological Survey, the Western Regional Climate Center, NASA, academia, and DWR staff and provided a valuable opportunity for curriculum development and expertise exchange. The course final discussion engaged participants in process of identifying additional climate products and services needed for regional and sector specific

  10. A user`s guide for the STARTER computer program. Consolidated Fuel Reprocessing Program

    SciTech Connect

    Childs, R.L.; Petrie, L.M.; Landers, N.F.

    1991-12-01

    The STARTER computer code is used to prepare a starting source distribution for the criticality computer code, KENO V.a. The input description and theoretical basis of the STARTER code are described in this user`s guide.

  11. EAACI Molecular Allergology User's Guide.

    PubMed

    Matricardi, P M; Kleine-Tebbe, J; Hoffmann, H J; Valenta, R; Hilger, C; Hofmaier, S; Aalberse, R C; Agache, I; Asero, R; Ballmer-Weber, B; Barber, D; Beyer, K; Biedermann, T; Bilò, M B; Blank, S; Bohle, B; Bosshard, P P; Breiteneder, H; Brough, H A; Caraballo, L; Caubet, J C; Crameri, R; Davies, J M; Douladiris, N; Ebisawa, M; EIgenmann, P A; Fernandez-Rivas, M; Ferreira, F; Gadermaier, G; Glatz, M; Hamilton, R G; Hawranek, T; Hellings, P; Hoffmann-Sommergruber, K; Jakob, T; Jappe, U; Jutel, M; Kamath, S D; Knol, E F; Korosec, P; Kuehn, A; Lack, G; Lopata, A L; Mäkelä, M; Morisset, M; Niederberger, V; Nowak-Węgrzyn, A H; Papadopoulos, N G; Pastorello, E A; Pauli, G; Platts-Mills, T; Posa, D; Poulsen, L K; Raulf, M; Sastre, J; Scala, E; Schmid, J M; Schmid-Grendelmeier, P; van Hage, M; van Ree, R; Vieths, S; Weber, R; Wickman, M; Muraro, A; Ollert, M

    2016-05-01

    The availability of allergen molecules ('components') from several protein families has advanced our understanding of immunoglobulin E (IgE)-mediated responses and enabled 'component-resolved diagnosis' (CRD). The European Academy of Allergy and Clinical Immunology (EAACI) Molecular Allergology User's Guide (MAUG) provides comprehensive information on important allergens and describes the diagnostic options using CRD. Part A of the EAACI MAUG introduces allergen molecules, families, composition of extracts, databases, and diagnostic IgE, skin, and basophil tests. Singleplex and multiplex IgE assays with components improve both sensitivity for low-abundance allergens and analytical specificity; IgE to individual allergens can yield information on clinical risks and distinguish cross-reactivity from true primary sensitization. Part B discusses the clinical and molecular aspects of IgE-mediated allergies to foods (including nuts, seeds, legumes, fruits, vegetables, cereal grains, milk, egg, meat, fish, and shellfish), inhalants (pollen, mold spores, mites, and animal dander), and Hymenoptera venom. Diagnostic algorithms and short case histories provide useful information for the clinical workup of allergic individuals targeted for CRD. Part C covers protein families containing ubiquitous, highly cross-reactive panallergens from plant (lipid transfer proteins, polcalcins, PR-10, profilins) and animal sources (lipocalins, parvalbumins, serum albumins, tropomyosins) and explains their diagnostic and clinical utility. Part D lists 100 important allergen molecules. In conclusion, IgE-mediated reactions and allergic diseases, including allergic rhinoconjunctivitis, asthma, food reactions, and insect sting reactions, are discussed from a novel molecular perspective. The EAACI MAUG documents the rapid progression of molecular allergology from basic research to its integration into clinical practice, a quantum leap in the management of allergic patients. PMID:27288833

  12. Virtual Beach 3: user's guide

    USGS Publications Warehouse

    Cyterski, Mike; Brooks, Wesley; Galvin, Mike; Wolfe, Kurt; Carvin, Rebecca; Roddick, Tonia; Fienen, Mike; Corsi, Steve

    2014-01-01

    Virtual Beach version 3 (VB3) is a decision support tool that constructs site-specific statistical models to predict fecal indicator bacteria (FIB) concentrations at recreational beaches. VB3 is primarily designed for beach managers responsible for making decisions regarding beach closures or the issuance of swimming advisories due to pathogen contamination. However, researchers, scientists, engineers, and students interested in studying relationships between water quality indicators and ambient environmental conditions will find VB3 useful. VB3 reads input data from a text file or Excel document, assists the user in preparing the data for analysis, enables automated model selection using a wide array of possible model evaluation criteria, and provides predictions using a chosen model parameterized with new data. With an integrated mapping component to determine the geographic orientation of the beach, the software can automatically decompose wind/current/wave speed and magnitude information into along-shore and onshore/offshore components for use in subsequent analyses. Data can be examined using simple scatter plots to evaluate relationships between the response and independent variables (IVs). VB3 can produce interaction terms between the primary IVs, and it can also test an array of transformations to maximize the linearity of the relationship The software includes search routines for finding the "best" models from an array of possible choices. Automated censoring of statistical models with highly correlated IVs occurs during the selection process. Models can be constructed either using previously collected data or forecasted environmental information. VB3 has residual diagnostics for regression models, including automated outlier identification and removal using DFFITs or Cook's Distances.

  13. Materials Sciences programs, Fiscal year 1993

    SciTech Connect

    1994-02-01

    This report provides a compilation and index of the DOE Materials Sciences Division programs; the compilation is to assist administrators, managers, and scientists to help coordinate research. The report is divided into 7 sections: laboratory projects, contract research projects, small business innovation research, major user facilities, other user facilities, funding level distributions, and indexes.

  14. Finite element analysis of composites materials for aerospace applications

    NASA Astrophysics Data System (ADS)

    Nurhaniza, M.; Ariffin, M. K. A.; Ali, Aidy; Mustapha, F.; Noraini, A. W.

    2010-05-01

    Composites materials are intended to be used more extensively as an alternative of aluminum structure in aircraft and aerospace applications. This is due to their attractive properties as high strength-to-weight ratio and stiffness-to-weight ratio. Besides that it clarifies the growing interest for composites materials due to advantages of lightweight, high strength, high stiffness, superior fatigue life, tremendous corrosion resistance and low cost manufacturing. In this study, a finite element analysis (FEA) of fiberglass unidirectional E-type was analyzed in the framework of ABAQUS finite element commercial software. The analysis was done to quantify the mechanical properties and response of unidirectional E-glass in term of tensile, compression and thermal responses. From the analysis, the maximum and minimum values of stress and strain for E-glass 21xK43 Gevetex and Silenka E-glass 1200tex were obtained and stress-strain curve is presented. The ultimate load of failure, elastic behavior, tensile strength and other properties for each laminated plates under tensile and thermal-stress are determined from stress-strain curves. The simulation will run twice for each material where the first simulation based on orientation angles of 45° for ply-1, -45° for ply-2 and 90° for ply-3 while the second simulation, the orientation angles is 0° for all plies. The simulation is successfully conducted and verified by experimental data.

  15. Experiences in Training End-User Searchers.

    ERIC Educational Resources Information Center

    Haines, Judith S.

    1982-01-01

    Describes study of chemists in the Chemistry Division, Organic Research Laboratory, Eastman Kodak Company, as end-user searchers on the DIALOG system searching primarily the "Chemical Abstracts" database. Training, level of use, online browsing, types of searches, satisfaction, costs, and value of end-user searching are highlighted. Three…

  16. User Interface Design for Dynamic Geometry Software

    ERIC Educational Resources Information Center

    Kortenkamp, Ulrich; Dohrmann, Christian

    2010-01-01

    In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

  17. Understanding University Library Users' Mistreatment of Books

    ERIC Educational Resources Information Center

    Perez, Carmen; Cuadrado, Manuel; Cervera, Amparo

    2009-01-01

    This paper analyses university library users' attitudes towards book vandalism in order to develop a basis for intervention. Using a customer oriented approach data was collected from users who attended an academic library exhibition on vandalized books at a University campus. Respondents were asked both for their reactions to the vandalism as…

  18. The Internet Guide for New Users.

    ERIC Educational Resources Information Center

    Dern, Daniel P.

    This guide will help the new user get started on the Internet. It explains what the Internet is, how to use it, and how to think like an Internet user. Part 1, "Ramping Up, Getting Started," covers the basics of getting access to the Internet and general information about it. It includes a review of the history and technology of the Internet, some…

  19. Understanding the Social Navigation User Experience

    ERIC Educational Resources Information Center

    Goecks, Jeremy

    2009-01-01

    A social navigation system collects data from its users--its community--about what they are doing, their opinions, and their decisions, aggregates this data, and provides the aggregated data--community data--back to individuals so that they can use it to guide behavior and decisions. Social navigation systems empower users with the ability to…

  20. Implementing Assistive Technology through User Groups

    ERIC Educational Resources Information Center

    Parette, Howard P.; Peterson-Karlan, George R.; Wojcik, Brian W.; Watts, Emily H.; Stoner, Julia B.

    2007-01-01

    Building the capacity of education professionals to make effective assistive technology (AT) decisions requires varying supports. One effective approach used in Central Illinois is to develop and maintain user groups comprising skilled practitioners and those interested in developing new AT skill sets. Over the past several years, AT user groups…

  1. Compensating user position for GPS ephemeris error

    NASA Technical Reports Server (NTRS)

    Wu, J. T.

    1990-01-01

    A method for canceling the effect of GPS ephemeris error on user position is proposed. In this method, the baseline vectors from the reference stations to the user are estimated without adjusting the GPS ephemeris. The user position is computed by adjustment using differenced data from the user and each station separately and averaging the results with weights inversely proportional to the lengths of the baselines. Alternatively, the differenced data can be averaged in a similar manner before the user position is estimated. The averaging procedure cancels most of the ephemeris error because the error is proportional to the length of the baseline. A numerical simulation is performed to demonstrate and evaluate the method. Two reference stations with perfectly known locations are assumed to be placed several hundred kilometers apart. A user receiver with a poorly known location is located between the stations. The user positions are first estimated separately using data from the user and each station and then averaged. The averaging reduces the error by about one order of magnitude.

  2. Unheard Voices: Institutional Repository End-Users

    ERIC Educational Resources Information Center

    Jean, Beth St.; Rieh, Soo Young; Yakel, Elizabeth; Markey, Karen

    2011-01-01

    This exploratory study investigates the perceptions and experiences of a group of institutional repository (IR) stakeholders seldom heard from: end-users. We interviewed twenty IR end-users recruited through five IRs to discover how they characterize the IR, how/why they use the IR, their credibility judgments in relation to the IR, and their…

  3. User Education: How To Teach It.

    ERIC Educational Resources Information Center

    Pedraza, Moises

    This analysis of how to educate information professionals in the work of educating users, and why it is desirable to do so, begins by presenting a general discussion of who the information users are, why they use information, and how information professionals can contribute to educating and helping citizens in Latin America to achieve a better way…

  4. Differentiating Characteristics of Juvenile Methamphetamine Users

    ERIC Educational Resources Information Center

    Fass, Daniel; Calhoun, Georgia B.; Glaser, Brian A.; Yanosky, Daniel J., II

    2009-01-01

    The authors investigated the differences in characteristics and risk behaviors endorsed by detained adolescent methamphetamine users and compared them with other drug users. Subjects completed the Millon Adolescent Clinical Inventory and a questionnaire in which sociodemographics and behavioral information were explored and compared. Multivariate…

  5. Eliciting User Requirements Using Appreciative Inquiry

    ERIC Educational Resources Information Center

    Gonzales, Carol Kernitzki

    2010-01-01

    Many software development projects fail because they do not meet the needs of users, are over-budget, and abandoned. To address this problem, the user requirements elicitation process was modified based on principles of Appreciative Inquiry. Appreciative Inquiry, commonly used in organizational development, aims to build organizations, processes,…

  6. End User Training: A Decade of Research.

    ERIC Educational Resources Information Center

    Gjestland, Creggan; Van Slyke, Craig; Collins, Rosann; Cheney, Paul

    End user training research has uncovered principles applicable to many forms of training and education. In an attempt to determine useful principles for IS (information systems) educators, the top 12 MIS (management information systems) journals were systematically reviewed to locate all of the end user training articles that were published in…

  7. Library Searching: An Industrial User's Viewpoint.

    ERIC Educational Resources Information Center

    Hendrickson, W. A.

    1982-01-01

    Discusses library searching of chemical literature from an industrial user's viewpoint, focusing on differences between academic and industrial researcher's searching techniques of the same problem area. Indicates that industry users need more exposure to patents, work with abstracting services and continued improvement in computer searching…

  8. 2006 XSD Scientific Software User Survey.

    SciTech Connect

    Jemian, P. R.

    2007-01-22

    In preparation for the 2006 XSD Scientific Software workshop, our committee sent a survey on June 16 to 100 users in the APS user community. This report contains the survey and the responses we received. The responses are presented in the order received.

  9. Conducting User Surveys: An Ongoing Information Imperative.

    ERIC Educational Resources Information Center

    Plosker, George R.

    2002-01-01

    Offers practical tips and suggestions on how to conduct user surveys to evaluate library services. Topics include how trends, such as online services impact library reference services; incorporating survey questions into reference interviews; segmenting academic and public library users; questionnaire design; measuring value; and tabulating…

  10. Knowledge Management, User Education, and Librarianship.

    ERIC Educational Resources Information Center

    Koenig, Michael E. D.

    This paper discusses the potential role of librarians in user education and training in the context of knowledge management (KM) initiatives. The paper first summarizes the results of a recent study of KM systems that found a high failure and disappointment rate, with more than half of the failures attributable to inadequate user training and…

  11. Integrated Approach to User Account Management

    NASA Technical Reports Server (NTRS)

    Kesselman, Glenn; Smith, William

    2007-01-01

    IT environments consist of both Windows and other platforms. Providing user account management for this model has become increasingly diffi cult. If Microsoft#s Active Directory could be enhanced to extend a W indows identity for authentication services for Unix, Linux, Java and Macintosh systems, then an integrated approach to user account manag ement could be realized.

  12. Designing Online Courses for Screen Reader Users

    ERIC Educational Resources Information Center

    Kearns, Lorna R.; Frey, Barbara A.; McMorland, Gabriel

    2013-01-01

    A review of multiple online courses at one institution was conducted by a skilled screen reader user for the purpose of assessing the extent to which the courses were navigable and understandable to online students using assistive technologies. This paper identifies features of online courses that may present problems for screen reader users and…

  13. NASTRAN user's guide (Level 17.5)

    NASA Technical Reports Server (NTRS)

    Field, E. I.; Herting, D. N.; Morgan, M. J.

    1979-01-01

    The user's guide is a handbook for engineers and analysts who use the NASTRAN finite element computer program supplements the NASTRAN Theoretical Manual (NASA SP-221), the NASTRAN User's Manual (NASA SP-222), the NASTRAN Programmer's Manual (NASA SP-223), and the NASTRAN Demonstration Program Manual (NASA SP-224). It provides modeling hints, attributes of the program, and references to the four manuals listed.

  14. Software Engineering for User Interfaces. Technical Report.

    ERIC Educational Resources Information Center

    Draper, Stephen W.; Norman, Donald A.

    The discipline of software engineering can be extended in a natural way to deal with the issues raised by a systematic approach to the design of human-machine interfaces. The user should be treated as part of the system being designed and projects should be organized to take into account the current lack of a priori knowledge of user interface…

  15. The User Group Technique in Action

    ERIC Educational Resources Information Center

    Smith, Ruth

    1973-01-01

    User groups open channels of communication between users and suppliers of government information. This often leads to an understanding of the problems and to improvements in services. Questions and problems are posed by SLA members within five subject areas to elicit responses from administrators of several government document services. (16…

  16. Science Experiments: Reaching Out to Our Users

    ERIC Educational Resources Information Center

    Nolan, Maureen; Tschirhart, Lori; Wright, Stephanie; Barrett, Laura; Parsons, Matthew; Whang, Linda

    2008-01-01

    As more users access library services remotely, it has become increasingly important for librarians to reach out to their user communities and promote the value of libraries. Convincing the faculty and students in the sciences of the value of libraries and librarians can be a particularly "hard sell" as more and more of their primary journal…

  17. Remote Users of Health Sciences Libraries.

    ERIC Educational Resources Information Center

    Self, Phyllis C.; Wright, Barbara A.; Waugh, Jessica L.

    1998-01-01

    Explores the variety of innovations in service models implemented over the last 25 years that health-sciences librarians have initiated to extend library services and information to remote users. Trends in health-care-management systems, education initiatives, the rise in consumerism, and expectations of new categories of users are discussed.…

  18. EPICS system: system structure and user interface

    SciTech Connect

    West, R.E.; Bartlett, J.F.; Bobbitt, J.S.; Lahey, T.E.; Kramper, B.J.; MacKinnon, B.A.

    1984-02-01

    This paper present the user's view of and the general organization of the EPICS control system at Fermilab. Various subsystems of the EPICS control system are discussed. These include the user command language, software protection, the device database, remote computer interfaces, and several application utilities. This paper is related to two other papers on EPICS: an overview paper and a detailed implementation paper.

  19. DAKOTA JAGUAR 2.1 user's Manual.

    SciTech Connect

    Adams, Brian M.; Lefantzi, Sophia; Chan, Ethan; Ruthruff, Joseph R.

    2011-06-01

    JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary for a user to use JAGUAR.

  20. Distance Learning for Mobile Internet Users

    ERIC Educational Resources Information Center

    Necat, Beran

    2007-01-01

    This paper provides an overview on the current state of art in the field of Distance learning for mobile users. It mentions a large range of technologies, services and approaches that may be used to bring distance learning to mobile internet users. These technologies are supposed to considerably increase innovative e-learning solutions for the…

  1. Understanding and Counseling the Chronic Drug User

    ERIC Educational Resources Information Center

    Dyer, Wayne W.; Vriend, John

    1975-01-01

    The authors present a paradigm of external and internal thinking as these apply as causes for positive and negative emotional shifts. The concepts of internally and externally oriented thinking are discussed, and these are related to counseling the dependent drug user. Strategies for dealing with the dependent drug user are presented. (Author)

  2. Determining User Preferences for Information Services.

    ERIC Educational Resources Information Center

    Halperin, Michael

    1981-01-01

    Reviews the various techniques and methods employed to measure user preferences with respect to the provision of particular library services. The ranking of user preferences, direct judgment methods of measurement, tradeoff analysis, and conjoint analysis are among the topics discussed. A reference list is included. (JL)

  3. Shawnee flue gas desulfurization computer model users manual

    SciTech Connect

    Sudhoff, F.A.; Torstrick, R.L.

    1985-03-01

    In conjunction with the US Enviromental Protection Agency sponsored Shawnee test program, Bechtel National, Inc., and the Tennessee Valley Authority jointly developed a computer model capable of projecting preliminary design and economics for lime- and limestone-scrubbing flue gas desulfurization systems. The model is capable of projecting relative economics for spray tower, turbulent contact absorber, and venturi-spray tower scrubbing options. It may be used to project the effect on system design and economics of variations in required SO/sub 2/ removal, scrubber operating parameters (gas velocity, liquid-to-gas (L/G) ration, alkali stoichiometry, liquor hold time in slurry recirculation tanks), reheat temperature, and scrubber bypass. It may also be used to evaluate alternative waste disposal methods or additives (MgO or adipic acid) on costs for the selected process. Although the model is not intended to project the economics of an individual system to a high degree of accuracy, it allows prospective users to quickly project comparative design and costs for limestone and lime case variations on a common design and cost basis. The users manual provides a general descripton of the Shawnee FGD computer model and detailed instructions for its use. It describes and explains the user-supplied input data which are required such as boiler size, coal characteristics, and SO/sub 2/ removal requirments. Output includes a material balance, equipment list, and detailed capital investment and annual revenue requirements. The users manual provides information concerning the use of the overall model as well as sample runs to serve as a guide to prospective users in identifying applications. The FORTRAN-based model is maintained by TVA, from whom copies or individual runs are available. 25 refs., 3 figs., 36 tabs.

  4. Nuclear Science User Facilities (NSUF) Monthly Report March 2015

    SciTech Connect

    Soelberg, Renae

    2015-03-01

    Nuclear Science User Facilities (NSUF) Formerly: Advanced Test Reactor National Scientific User Facility (ATR NSUF) Monthly Report February 2015 Highlights; Jim Cole attended the OECD NEA Expert Group on Innovative Structural Materials meeting in Paris, France; Jim Lane and Doug Copsey of Writers Ink visited PNNL to prepare an article for the NSUF annual report; Brenden Heidrich briefed the Nuclear Energy Advisory Committee-Facilities Subcommittee on the Nuclear Energy Infrastructure Database project and provided them with custom reports for their upcoming visits to Argonne National Laboratory, Idaho National Laboratory, Oak Ridge National Laboratory and the Massachusetts Institute of Technology; and University of California-Berkeley Principal Investigator Mehdi Balooch visited PNNL to observe measurements and help finalize plans for completing the desired suite of analyses. His visit was coordinated to coincide with the visit of Jim Lane and Doug Copsey.

  5. Identification and conceptualization of nurse super users.

    PubMed

    Boffa, Daniel P; Pawola, Lawrence M

    2006-01-01

    The purpose of this study is to identify super users from the general nursing population of clinical information systems users. Q-methodology was employed to identify and categorize the viewpoints of the nurses toward the use of these systems. Four factors that represented different views regarding the use of clinical information systems were extracted. This study identifies super users'perception and attitude toward the use of clinical information systems in the workplace. The current literature reflects a weak semantic structure for the term. Thus, the study assists with defining the term "super user." Healthcare organizations can use this information to identify individuals who have the ability and attitude to function as a super user. These individuals can be more accurately and efficiently extracted from a general registered nurse population to give them more extensive training and to strategically position them within clinical operations. PMID:17091792

  6. Identification of User Facility Related Publications

    SciTech Connect

    Patton, Robert M; Stahl, Christopher G; Wells, Jack C; Potok, Thomas E

    2012-01-01

    Scientific user facilities provide physical resources and technical support that enable scientists to conduct experiments or simulations pertinent to their respective research. One metric for evaluating the scientific value or impact of a facility is the number of publications by users as a direct result of using that facility. Unfortunately, for a variety of reasons, capturing accurate values for this metric proves time consuming and error-prone. This work describes a new approach that leverages automated browser technology combined with text analytics to reduce the time and error involved in identifying publications related to user facilities. With this approach, scientific user facilities gain more accurate measures of their impact as well as insight into policy revisions for user access.

  7. Applying Cognitive Psychology to User Interfaces

    NASA Astrophysics Data System (ADS)

    Durrani, Sabeen; Durrani, Qaiser S.

    This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

  8. RADTRAN 4: User guide. Volume 3

    SciTech Connect

    Neuhauser, K S; Kanipe, F L

    1992-01-01

    RADTRAN 4 is used to evaluate radiological consequences of incident-free transportation, as well as the radiological risks from vehicular accidents occurring during transportation. This User Guide is Volume 3 in a series of four volume of the documentation of the RADTRAN 4 computer code for transportation risk analysis. The other three volumes are Volume 1, the Executive Summary; Volume 2, the Technical Manual; and Volume 4, the Programmer`s Manual. The theoretical and calculational basis for the operations performed by RADTRAN 4 are discussed in Volume 2. Throughout this User Guide the reader will be referred to Volume 2 for detailed discussions of certain RADTRAN features. This User Guide supersedes the document ``RADTRAN III`` by Madsen et al. (1983). This RADTRAN 4 User Guide specifies and describes the required data, control inputs, input sequences, user options, program limitations, and other activities necessary for execution of the RADTRAN 4 computer code.

  9. FEL beam sharing systems for eight user`s stations of the FELI

    SciTech Connect

    Okuma, S.; Saeki, K.; Kobayashi, A.

    1995-12-31

    Two infrared free electron lasers (FELs) of the FELI are now operating in the wavelength range of 1-20 {mu}m. Two kinds of FEL beam are sent from the exits of the optical cavities to the diagnostics room through the evacuated optical pipelines whose inner diameter is about 150 mm. From the diagnostic room to user`s stations, FEL beams are delivered through FEL beam sharing systems. Au-coated mirrors with fan-shaped holes are used instead of half mirrors such as ZnSe to share FEL beams to the diagnostics room and the following user`s stations, since maximum diameter of FEL beams is 50 mm in the wavelength range of 1-20 {mu}m and an opening angle of the fan-shaped holes can change a sharing ratio of delivering FEL average power for user`s stations; for instance, 10% to the diagnostics room and 90% to eight user`s stations. Each system enables us to use the same FEL beam simultaneously at the user`s stations. The two beam sharing systems will be installed in the user`s facility early in August.

  10. The Design of Document Retrieval Systems for Academic Users: Implications of Students on Users' Relevance Criteria.

    ERIC Educational Resources Information Center

    Wang, Peiling

    1997-01-01

    Proposes principles for the design of effective document retrieval (DR) systems incorporating users' cognitive behaviors. Addresses three issues: (1) effective representations for documents to enable users' relevance judgments and decision making; (2) efficient presentations of documents to facilitate users' information processing and decision…

  11. Examining Marijuana User and Non-User Prototypes in Formative Research for Prevention Campaigns

    ERIC Educational Resources Information Center

    Comello, Maria Leonora G.; Slater, Michael D.

    2010-01-01

    We report on research--both quantitative and qualitative--conducted to explore perceptions of prototypes of marijuana users, as well as the extent to which self-prototype congruence predicted marijuana use intention. Results of a survey of undergraduates (N = 139) showed that prototypes of users and non-users differed in terms of key attributes,…

  12. The effect of skin passing on the material behavior of metal strip in pure bending and tension

    NASA Astrophysics Data System (ADS)

    Weiss, Matthias; Ryan, Will; Rolfe, Bernard; Yang, Chunhui

    2010-06-01

    The metal strip used in roll forming has often been preprocessed by (tension or roller) leveling or by skin-pass rolling, and as a consequence, may contain residual stresses. These stresses are not well observed by the tensile test, but could have a significant effect on the bending and springback behavior. With the advent of improved process design techniques for roll forming, including advanced finite element techniques, the need for precise material property data has become important. The major deformation mode of roll forming is that of bending combined with unloading and reverse bending, and hence property data derived from bend tests could be more relevant than that from tensile testing. This work presents a numerical study on the effect of skin passing on the material behavior of stainless steel strip in pure bending and tension. A two dimensional (2-D) numerical model was developed using Abaqus Explicit to analyze the affect of skin passing on the residual stress profile across a section for various working conditions. The deformed meshes and their final stress fields were then imported as pre-defined fields into Abaqus Standard, and the post-skin passing material behavior in pure bending was determined. The results show that a residual stress profile is introduced into the steel strip during skin passing, and that its shape and stress level depend on the overall thickness reduction as well as the number of rolling passes used in the skin passing process. The material behavior in bending and the amount of springback changed significantly depending on the skin pass condition.

  13. Buprenorphine pharmacotherapy and behavioral treatment: comparison of outcomes among prescription opioid users, heroin users and combination users.

    PubMed

    Nielsen, Suzanne; Hillhouse, Maureen; Mooney, Larissa; Ang, Alfonso; Ling, Walter

    2015-01-01

    Most research examining buprenorphine has been conducted with heroin users. Few studies have examined buprenorphine pharmacotherapy for prescription opioid users. Data were from a randomized controlled trial of behavioral treatment provided for 16weeks on a platform of buprenorphine pharmacotherapy and medication management. We compared heroin (H, n=54), prescription opioid (PO, n=54) and combination heroin+prescription opioid (POH, n=71) users to test the hypothesis that PO users will have better treatment outcomes compared with heroin users. The PO group provided more opioid-negative urine drug screens over the combined treatment period (PO:70%, POH:40%, H:38%, p<0.001) and at the end of the combined treatment period (PO:65%, POH:31%, H:33%, p<0.001). Retention was lowest in the H group (PO:80%, POH:65%, H:57%, p=0.039). There was no significant difference in buprenorphine dose between the groups. PO users appear to have better outcomes in buprenorphine pharmacotherapy compared to those reporting any heroin use, confirming that buprenorphine pharmacotherapy is effective in PO users. PMID:25065489

  14. Six-Degree-of-Freedom Dynamic Test System (SDTS) User Test Planning Guide

    NASA Technical Reports Server (NTRS)

    Stokes, LeBarian

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the SDTS. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  15. User requirements for NASA data base management systems. Part 1: Oceanographic discipline

    NASA Technical Reports Server (NTRS)

    Fujimoto, B.

    1981-01-01

    Generic oceanographic user requirements were collected and analyzed for use in developing a general multipurpose data base management system for future missions of the Office of Space and Terrestrial Applications (OSTA) of NASA. The collection of user requirements involved; studying the state-of-the-art technology in data base management systems; analyzing the results of related studies; formulating a viable and diverse list of scientists to be interviewed; developing a presentation format and materials; and interviewing oceanographic data users. More effective data management systems are needed to handle the increasing influx of data.

  16. CHEMCON User`s Manual, Version 3.1

    SciTech Connect

    Gaeta, M.J.; Merrill, B.J.

    1995-09-01

    CHEMCON is a computer program developed to analyze thermal transients of tokamak fusion reactors. It contains a one dimensional, cylindrical geometry, conduction model that allows a variety of heat transfer modes within nodes and at node boundaries. Solid regions can be grouped into segments that communicate at their boundaries through a radiation enclosure model. CHEMCON includes a single volume, pressurization/condensation model that is used to include the effects of an in-vessel LOCA and the resulting heat transfer between hot surfaces and cold surfaces in contact with this volume. The code includes properties for 11 solid materials and two gases. CHEMCON also contains specialized models for modeling chemical reactions of node boundaries with air and steam including the gases produced from these reactions. In addition, a model treating the collapse of radiation shields within a gap is also included. CHEMCON is used mainly to simulate the thermal transient for post-blowdown loss-of-coolant-accidents.

  17. HYPERELASTIC MODELS FOR GRANULAR MATERIALS

    SciTech Connect

    Humrickhouse, Paul W; Corradini, Michael L

    2009-01-29

    A continuum framework for modeling of dust mobilization and transport, and the behavior of granular systems in general, has been reviewed, developed and evaluated for reactor design applications. The large quantities of micron-sized particles expected in the international fusion reactor design, ITER, will accumulate into piles and layers on surfaces, which are large relative to the individual particle size; thus, particle-particle, rather than particle-surface, interactions will determine the behavior of the material in bulk, and a continuum approach is necessary and justified in treating the phenomena of interest; e.g., particle resuspension and transport. The various constitutive relations that characterize these solid particle interactions in dense granular flows have been discussed previously, but prior to mobilization their behavior is not even fluid. Even in the absence of adhesive forces between particles, dust or sand piles can exist in static equilibrium under gravity and other forces, e.g., fluid shear. Their behavior is understood to be elastic, though not linear. The recent “granular elasticity” theory proposes a non-linear elastic model based on “Hertz contacts” between particles; the theory identifies the Coulomb yield condition as a requirement for thermodynamic stability, and has successfully reproduced experimental results for stress distributions in sand piles. The granular elasticity theory is developed and implemented in a stand- alone model and then implemented as part of a finite element model, ABAQUS, to determine the stress distributions in dust piles subjected to shear by a fluid flow. We identify yield with the onset of mobilization, and establish, for a given dust pile and flow geometry, the threshold pressure (force) conditions on the surface due to flow required to initiate it. While the granular elasticity theory applies strictly to cohesionless granular materials, attractive forces are clearly important in the interaction of

  18. PLANETSYS, a Computer Program for the Steady State and Transient Thermal Analysis of a Planetary Power Transmission System: User's Manual

    NASA Technical Reports Server (NTRS)

    Hadden, G. B.; Kleckner, R. J.; Ragen, M. A.; Dyba, G. J.; Sheynin, L.

    1981-01-01

    The material presented is structured to guide the user in the practical and correct implementation of PLANETSYS which is capable of simulating the thermomechanical performance of a multistage planetary power transmission. In this version of PLANETSYS, the user can select either SKF or NASA models in calculating lubricant film thickness and traction forces.

  19. Materials management information systems.

    PubMed

    1996-01-01

    The hospital materials management function--ensuring that goods and services get from a source to an end user--encompasses many areas of the hospital and can significantly affect hospital costs. Performing this function in a manner that will keep costs down and ensure adequate cash flow requires effective management of a large amount of information from a variety of sources. To effectively coordinate such information, most hospitals have implemented some form of materials management information system (MMIS). These systems can be used to automate or facilitate functions such as purchasing, accounting, inventory management, and patient supply charges. In this study, we evaluated seven MMISs from seven vendors, focusing on the functional capabilities of each system and the quality of the service and support provided by the vendor. This Evaluation is intended to (1) assist hospitals purchasing an MMIS by educating materials managers about the capabilities, benefits, and limitations of MMISs and (2) educate clinical engineers and information system managers about the scope of materials management within a healthcare facility. Because software products cannot be evaluated in the same manner as most devices typically included in Health Devices Evaluations, our standard Evaluation protocol was not applicable for this technology. Instead, we based our ratings on our observations (e.g., during site visits), interviews we conducted with current users of each system, and information provided by the vendor (e.g., in response to a request for information [RFI]). We divided the Evaluation into the following sections: Section 1. Responsibilities and Information Requirements of Materials Management: Provides an overview of typical materials management functions and describes the capabilities, benefits, and limitations of MMISs. Also includes the supplementary article, "Inventory Cost and Reimbursement Issues" and the glossary, "Materials Management Terminology." Section 2. The

  20. Sandia Material Model Driver

    2005-09-28

    The Sandia Material Model Driver (MMD) software package allows users to run material models from a variety of different Finite Element Model (FEM) codes in a standalone fashion, independent of the host codes. The MMD software is designed to be run on a variety of different operating system platforms as a console application. Initial development efforts have resulted in a package that has been shown to be fast, convenient, and easy to use, with substantialmore » growth potential.« less

  1. Canadian MSAT field trial program user requirements

    NASA Technical Reports Server (NTRS)

    Pedersen, Allister

    1990-01-01

    A wide range of mobile satellite service offerings will be available in late 1993 with the launch of Canada's first satellite devoted almost exclusively to mobile and transportable services. During the last seven years, the Dept. of Communications has been meeting with potential MSAT users in government and the private sector as part of a $20M Communications Trials Program. User trials will be conducted using leased capacity as well as capacity on Canada's MSAT satellite. User requirements are discussed which were identified under the Communications Trials Program. Land, marine, aeronautical, and fixed applications are described from the perspective of the end users. Emphasis is placed on field trials being accomplished using leased capacity such as the marine data trial being implemented by Ultimateast Data Communications, trials using transportable briefcase terminals and additional field trials being considered for implementation with the TMI Mobile Data Service. The pre-MSAT trials that will be conducted using leased capacity are only a limited sample of the overall end user requirements that have been identified to date. Additional end user applications are discussed, along with a summary of user benefits.

  2. Usage analysis of user files in UNIX

    NASA Technical Reports Server (NTRS)

    Devarakonda, Murthy V.; Iyer, Ravishankar K.

    1987-01-01

    Presented is a user-oriented analysis of short term file usage in a 4.2 BSD UNIX environment. The key aspect of this analysis is a characterization of users and files, which is a departure from the traditional approach of analyzing file references. Two characterization measures are employed: accesses-per-byte (combining fraction of a file referenced and number of references) and file size. This new approach is shown to distinguish differences in files as well as users, which cam be used in efficient file system design, and in creating realistic test workloads for simulations. A multi-stage gamma distribution is shown to closely model the file usage measures. Even though overall file sharing is small, some files belonging to a bulletin board system are accessed by many users, simultaneously and otherwise. Over 50% of users referenced files owned by other users, and over 80% of all files were involved in such references. Based on the differences in files and users, suggestions to improve the system performance were also made.

  3. Rapid Prototyping of Distributed User Interfaces

    NASA Astrophysics Data System (ADS)

    Massó, José Pascual Molina; Vanderdonckt, Jean; López, Pascual González; Fernández-Caballero, Antonio; Pérez, María Dolores Lozano

    This paper introduces a software tool for rapid prototyping of interactive systems whose user interfaces could be distributed according to four axes defined in a design space: type of computing platform, amount of interaction surfaces, type of interaction surface, and type of user interface. This software is based on a virtual toolkit for rendering the user interfaces in a virtual world depicting the real world in which the distribution occurs. The virtual toolkit consists of a layer for rendering a concrete user interface specified in a user interface description language. This paper presents its extension to modeling the external environment in terms of the design space so as to render the context of use in which the user interfaces are distributed. For each axis, a pair of functions enables exploring the axis in decreasing and increasing order so as to explore various situations of distribution, axis by axis, or in a combined way. As the interfaces resulting from this rendering are truly executable ones, this system provides designers with an acceptable means for generating ideas about how a user interface can be distributed in a context of use, and helps to evaluate the quality of a solution at an early design stage. Four representative situations located on the design space are implemented and discussed: distribution in a multi-platform context, distribution of the workplace, ubiquitous computing, and ambient intelligence, thus proving the coverage of the design space and the capabilities of the whole system

  4. 3DGRAPE/AL User's Manual

    NASA Technical Reports Server (NTRS)

    Sorenson, Reese L.; Alter, Stephen J.

    1995-01-01

    This document is a users' manual for a new three-dimensional structured multiple-block volume g generator called 3DGRAPE/AL. It is a significantly improved version of the previously-released a widely-distributed programs 3DGRAPE and 3DMAGGS. It generates volume grids by iteratively solving the Poisson Equations in three-dimensions. The right-hand-side terms are designed so that user-specific; grid cell heights and user-specified grid cell skewness near boundary surfaces result automatically, with little user intervention. The code is written in Fortran-77, and can be installed with or without a simple graphical user interface which allows the user to watch as the grid is generated. An introduction describing the improvements over the antecedent 3DGRAPE code is presented first. Then follows a chapter on the basic grid generator program itself, and comments on installing it. The input is then described in detail. After that is a description of the Graphical User Interface. Five example cases are shown next, with plots of the results. Following that is a chapter on two input filters which allow use of input data generated elsewhere. Last is a treatment of the theory embodied in the code.

  5. User interaction with the LUCIFER control software

    NASA Astrophysics Data System (ADS)

    Knierim, Volker; Jütte, Marcus; Polsterer, Kai; Schimmelmann, Jan

    2006-06-01

    We present the concept and design of the interaction between users and the LUCIFER Control Software Package. The necessary functionality that must be provided to a user depends on and differs greatly for the different user types (i.e., engineers and observers). While engineers want total control over every service provided by the software system, observers are typically only interested in a fault tolerant and efficient user interface that helps them to carry out their observations in the best possible way during the night. To provide the functionality engineers need, direct access to a service is necessary. This may harbor a possible threat to the instrument in the case of a faulty operation by the engineer, but is the only way to test every unit during integration and commissioning of the instrument, and for service time later on. The observer on the other hand should only have indirect access to the instrument, controlled by an instrument manager service that ensures the necessary safety checks so that no harm can be done to the instrument. Our design of the user interaction provides such an approach on a level that is transparent to any interaction component regardless of interface type (i.e., textual or graphical). Using the interface and inheritance concepts of the Java Programming Language and its tools to create graphical user interfaces, it is possible to provide the necessary level of flexibility for the different user types on one side, while ensuring maximum reusability of code on the other side.

  6. Information Filtering Based on Users' Negative Opinions

    NASA Astrophysics Data System (ADS)

    Guo, Qiang; Li, Yang; Liu, Jian-Guo

    2013-05-01

    The process of heat conduction (HC) has recently found application in the information filtering [Zhang et al., Phys. Rev. Lett.99, 154301 (2007)], which is of high diversity but low accuracy. The classical HC model predicts users' potential interested objects based on their interesting objects regardless to the negative opinions. In terms of the users' rating scores, we present an improved user-based HC (UHC) information model by taking into account users' positive and negative opinions. Firstly, the objects rated by users are divided into positive and negative categories, then the predicted interesting and dislike object lists are generated by the UHC model. Finally, the recommendation lists are constructed by filtering out the dislike objects from the interesting lists. By implementing the new model based on nine similarity measures, the experimental results for MovieLens and Netflix datasets show that the new model considering negative opinions could greatly enhance the accuracy, measured by the average ranking score, from 0.049 to 0.036 for Netflix and from 0.1025 to 0.0570 for Movielens dataset, reduced by 26.53% and 44.39%, respectively. Since users prefer to give positive ratings rather than negative ones, the negative opinions contain much more information than the positive ones, the negative opinions, therefore, are very important for understanding users' online collective behaviors and improving the performance of HC model.

  7. User`s manual for the master equipment list: Phase 1

    SciTech Connect

    Sandoval, J.D.

    1997-05-12

    This manual is intended to provide a user with enough detailed instruction to guide them through the Master Equipment List Phase 1 (MEL Phase 1) application system operations. The MEL Phase 1 application is a database system that stores Equipment Identification Number (EIN) information to support equipment tracking in the 200E and 200W Tank Farms for the Tank Waste Remediation System Division. The MEL Phase 1 application supports both the user application and administrative control functions. The user application functions include: viewing by Folder, reporting, performing queries, and editing specific data. The administrative control functions include: maintaining valid user identifications, passwords, privileges, defining drop-down lists, and review of the change log relating to EIN data entries, additions, deletions, and editing. The scope of this User`s Manual is to discuss these functions and is intended to guide users and answer questions regarding the MEL Phase 1 application.

  8. Automatic generation of indoor navigation instructions for blind users using a user-centric graph.

    PubMed

    Dong, Hao; Ganz, Aura

    2014-01-01

    The complexity and diversity of indoor environments brings significant challenges to automatic generation of navigation instructions for blind and visually impaired users. Unlike generation of navigation instructions for robots, we need to take into account the blind users wayfinding ability. In this paper we introduce a user-centric graph based solution for cane users that takes into account the blind users cognitive ability as well as the user's mobility patterns. We introduce the principles of generating the graph and the algorithm used to automatically generate the navigation instructions using this graph. We successfully tested the efficiency of the instruction generation algorithm, the correctness of the generated paths, and the quality of the navigation instructions. Blindfolded sighted users were successful in navigating through a three-story building. PMID:25570105

  9. User Registration Systems for Distributed Systems

    NASA Astrophysics Data System (ADS)

    Murphy, K. J.; Cechini, M.; Pilone, D.; Mitchell, A.

    2010-12-01

    As NASA’s Earth Observing System Data and Information System (EOSDIS) systems have evolved over the years, most of the EOSDIS data are now available to users via anonymous on-line access. Although the changes have improved the dissemination efficiency of earth science data, the anonymous access has made it difficult to characterize users, capture metrics on the value of EOSDIS and provide customized services that benefit users. As the number of web-based applications continues to grow, data centers and application providers have implemented their own user registration systems and provided new tools and interfaces for their registered users. This has led to the creation of independent registration systems for accessing data and interacting with online tools and services. The user profile information maintained at each of these registration systems is not consistent and the registration enforcement varies by system as well. This problem is in no way unique to EOSDIS and represents a general challenge to the distributed computing community. In a study done in 2007(http://www2007.org/papers/paper620.pd), the average user has approximately 7 passwords for about 25 accounts and enters a password 8 times a day. These numbers have only increased in the last three years. To try and address this, a number of solutions have been offered including Single Sign-On solutions using a common backend like Microsoft Active Directory or an LDAP server, trust based identity providers like OpenID, and various forms of authorization delegation like OAuth or SAML/XACML. This talk discusses the differences between authentication and authorization, the state of the more popular user registration solutions available for distributed use, and some of the technical and policy drivers that need to be considered when incorporating a user registration system into your application.

  10. A user-oriented synthetic workload generator

    NASA Technical Reports Server (NTRS)

    Kao, Wei-Lun

    1991-01-01

    A user oriented synthetic workload generator that simulates users' file access behavior based on real workload characterization is described. The model for this workload generator is user oriented and job specific, represents file I/O operations at the system call level, allows general distributions for the usage measures, and assumes independence in the file I/O operation stream. The workload generator consists of three parts which handle specification of distributions, creation of an initial file system, and selection and execution of file I/O operations. Experiments on SUN NFS are shown to demonstrate the usage of the workload generator.

  11. SMS/GOES WEFAX users guide

    NASA Technical Reports Server (NTRS)

    1972-01-01

    An attempt is made to provide both the WEFAX user and the APT user with the basic equipments necessary to convert present equipment to the new SMS WEFAX frequency. This conversion is simple and, as in all communication systems, can be accomplished by innumerable approaches. The approach used here assumed commercial purchase of components and integration by the user into his system. This conversion requires no modification to existing equipment and is simply an RF conversion from S-band to the present VHF frequencies.

  12. PEGASUS User's Guide. 5.1c

    NASA Technical Reports Server (NTRS)

    Suhs, Norman E.; Dietz, William E.; Rogers, Stuart E.; Nash, Steven M.; Onufer, Jeffrey T.

    2000-01-01

    PEGASUS 5.1 is the latest version of the PEGASUS series of mesh interpolation codes. It is a fully three-dimensional code. The main purpose for the development of this latest version was to significantly decrease the number of user inputs required and to allow for easier operation of the code. This guide is to be used with the user's manual for version 4 of PEGASUS. A basic description of methods used in both versions is described in the Version 4 manual. A complete list of all user inputs used in version 5.1 is given in this guide.

  13. Technologies for user-preferred routing

    NASA Astrophysics Data System (ADS)

    McNally, B. D.; Sridhar, Banavar

    1996-05-01

    The 1995 report of the RTCA Board of Directors' Select Committee on Free Flight states that 'insufficient capacity, limited access, and excessive operating restrictions have escalated operating costs, increase delays, and decreased efficiency for all users' of the national airspace system. The Air Transport Association estimates the annual loss to be 3.5 billion dollars. The goal of the user preferred routing research is to develop integrated airborne and ground technologies that enable the highest possible level of unconstrained, user-preferred routing in enroute airspace.

  14. User instructions for the CIDER Dose Code

    SciTech Connect

    Eslinger, P.W.; Lessor, K.S.; Ouderkirk, S.J.

    1994-05-01

    This document provides user instructions for the CIDER (Calculation of Individual Doses from Environmental Radionuclides) computer code. The CIDER code computes estimates of annual doses estimated for both reference individuals with a known residence and food consumption history. This document also provides user instructions for four utility codes used to build input data libraries for CIDER. These utility codes are ENVFAC (environmental factors), FOOFAC (food factors), LIFFAC (lifestyle factors), and ORGFAC (organ factors). Finally, this document provides user instructions for the EXPAND utility code. The EXPAND code processes a result file from CIDER and extracts a summary of the dose information for reporting or plotting purposes.

  15. Assessment of User Home Location Geoinference Methods

    SciTech Connect

    Harrison, Joshua J.; Bell, Eric B.; Corley, Courtney D.; Dowling, Chase P.; Cowell, Andrew J.

    2015-05-29

    This study presents an assessment of multiple approaches to determine the home and/or other important locations to a Twitter user. In this study, we present a unique approach to the problem of geotagged data sparsity in social media when performing geoinferencing tasks. Given the sparsity of explicitly geotagged Twitter data, the ability to perform accurate and reliable user geolocation from a limited number of geotagged posts has proven to be quite useful. In our survey, we have achieved accuracy rates of over 86% in matching Twitter user profile locations with their inferred home locations derived from geotagged posts.

  16. Guidelines for preparing software user documentation

    NASA Technical Reports Server (NTRS)

    Miller, Diane F.

    1987-01-01

    Clear, easy-to-use software user's manuals make strong demands on special technical communication techniques. Principles and guidelines are given for analyzing the audience and dealing with wide-ranging backgrounds of potential users. Types of information to be included in a complete manual are suggested, with a technique for creating a user-oriented rather than process-oriented organization. Accuracy verification is emphasized. Simple tips are gievn for formatting for quick comprehension and reference, for deciding on packaging, for creating helpful illustrations and examples, and for setting up clear and consistent conventions. Simple guidelines are offered for writing clearly and concisely and for editing.

  17. Decision making of vending machine users.

    PubMed

    Verhoef, L W

    1988-06-01

    This article discusses two possible solutions to decision making about controls by users of vending machines: the 'one button to press' system (requiring a compound decision - the pressing of one button only); the 'several buttons to press' system (requiring a compound decision - the pressing of several buttons). The basis for the discussion is a field evaluation of a train ticket vending machine (TVM) that can sell 800 different types of tickets and can accept all kinds of payment. For this evaluation several hundred TVM users and ticket window users were observed and interviewed. Special attention was paid to the errors which were made. PMID:15676652

  18. Hydrogen Mixing Studies (HMS), user`s manual

    SciTech Connect

    Lam, K.L.; Wilson, T.L.; Travis, J.R.

    1994-12-01

    Hydrogen Mixing Studies (HMS) is a best-estimate analysis tool for predicting the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containments and other facilities. It can model geometrically complex facilities having multiple compartments and internal structures. The code can simulate the effects of steam condensation, heat transfer to walls and internal structures, chemical kinetics, and fluid turbulence. The gas mixture may consist of components included in a built-in library of 20 species. HMS is a finite-volume computer code that solves the time-dependent, three-dimensional (3D) compressible Navier Stokes equations. Both Cartesian and cylindrical coordinate systems are available. Transport equations for the fluid internal energy and for gas species densities are also solved. HMS was originally developed to run on Cray-type supercomputers with vector-processing units that greatly improve the computational speed, especially for large, complex problems. Recently the code has been converted to run on Sun workstations. Both the Cray and Sun versions have the same built-in graphics capabilities that allow 1D, 2D, 3D, and time-history plots of all solution variables. Other code features include a restart capability and flexible definitions of initial and time-dependent boundary conditions. This manual describes how to use the code. It explains how to set up the model geometry, define walls and obstacles, and specify gas species and material properties. Definitions of initial and boundary conditions are also described. The manual also describes various physical model and numerical procedure options, as well as how to turn them on. The reader also learns how to specify different outputs, especially graphical display of solution variables. Finally sample problems are included to illustrate some applications of the code. An input deck that illustrates the minimum required data to run HMS is given at the end of this manual.

  19. National Energy AudiT (NEAT) user`s manual

    SciTech Connect

    Krigger, J.K.; Adams, N.; Gettings, M.

    1997-10-01

    Welcome to the US Department of Energy`s (DOE`s) energy auditing tool called ``NEAT``. NEAT, an acronym for National Energy AudiT, is a program for personal computers that was designed for use by local agencies in the Weatherization Assistance Program. It is an approved alternative audit that meets all auditing requirements set forth by the program as well as those anticipated from new regulations pertaining to waiver of the 40% materials requirements. NEAT is easy to use. It applies engineering and economic calculations to evaluate energy conservation measures for single-family, detached houses or small multifamily buildings. You can use it to rank measured for each individual house, or to establish a priority list of conservation measures for nearly identical housing types. NEAT was written for the Weatherization Assistance Program by Oak Ridge National Laboratory. Many buildings energy consumption algorithms are taken from Lawrence Berkeley Laboratory`s to the computerized Instrumented Residential Audit (CIRA), published in 1982 for the Department of energy. Equipment retrofit conservation measures are based on published reports on various heating retrofits. Heating and cooling system replacement conservation measures are based on the energy ratings of new heating and cooling equipment. The Weatherization Program anticipates that this computer-based energy audit will offer substantial performance improvements to many states who choose to incorporate it into their programs. When conservation measures are evaluated locally according to climate, fuel cost, measure cost, and existing house conditions, the Program will be closer to its goal of assuring the maximum return for every federal dollar spent.

  20. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.