Science.gov

Sample records for abnormal test result

  1. Abnormal Cervical Cancer Screening Test Results

    MedlinePlus

    ... LEEP) —A thin wire loop that carries an electric current is used to remove abnormal areas of the ... the cervix using a thin wire loop and electric energy. Pap ... this document sets forth current information and opinions related to women’s health. The ...

  2. Abnormal ovarian cancer screening test result: women's informational, psychological and practical needs.

    PubMed

    Ryan, Patricia Y; Graves, Kristi D; Pavlik, Edward J; Andrykowski, Michael A

    2007-01-01

    Considerable effort has been devoted to the identification of cost-effective approaches to screening for ovarian cancer (OC). Transvaginal ultrasound (TVS) is one such screening approach. Approximately 5-7% of routine TVS screening tests yield abnormal results. Some women experience significant distress after receipt of an abnormal TVS screening test. Four focus groups provided in-depth, qualitative data regarding the informational, psychological, and practical needs of women after the receipt of an abnormal TVS result. Through question and content analytic procedures, we identified four themes: anticipation, emotional response, role of the screening technician, and impact of prior cancer experiences. Results provide initial guidance toward development of interventions to promote adaptive responses after receipt of an abnormal cancer screening test result.

  3. Notification of abnormal lab test results in an electronic medical record: do any safety concerns remain?

    PubMed Central

    Singh, Hardeep; Thomas, Eric J.; Sittig, Dean F.; Wilson, Lindsey; Espadas, Donna; Khan, Myrna M.; Petersen, Laura A.

    2010-01-01

    Background: Follow-up of abnormal outpatient laboratory test results is a major patient safety concern. Electronic medical records can potentially address this concern through automated notification. We examined whether automated notifications of abnormal laboratory results (alerts) in an integrated electronic medical record resulted in timely follow-up actions. Methods: We studied four alerts: hemoglobin A1c (HbA1c) ≥15%, positive hepatitis C antibody (HCV), prostate specific antigen (PSA) ≥15 ng/mL, and thyroid stimulating hormone (TSH) ≥ 15 mIU/L. An alert tracking system determined whether the alert was acknowledged (i.e. provider clicked on and opened the message) within two weeks of transmission; acknowledged alerts were considered read. Within 30 days of result transmission, record review and provider contact determined follow-up actions (e.g. patient contact, treatment etc.). Multivariable logistic regression models analyzed predictors for lack of timely follow-up. Results: Between May 2008 and December 2008, 78,158 tests (HbA1c, HCV, TSH and PSA) were performed, of which 1163 (1.48%) were transmitted as alerts; 10.2% of these (119/1163) were unacknowledged. Timely follow-up was lacking in 79 (6.8%) and was statistically not different for acknowledged and unacknowledged alerts (6.4% vs. 10.1%; p =.13). Two-hundred two alerts (17.4% of 1163) arose from unnecessarily ordered (redundant) tests. Alerts for a new versus known diagnosis were more likely to lack timely follow-up (OR: 7.35; 95% CI: 4.16-12.97) whereas alerts related to redundant tests were less likely to lack timely follow-up (OR: 0.24; 95% CI: 0.07-0.84). Conclusions: Safety concerns related to timely patient follow-up remain despite automated notification of non-life threatening abnormal laboratory results in the outpatient setting. PMID:20193832

  4. Provider management strategies of abnormal test result alerts: a cognitive task analysis

    PubMed Central

    Sawhney, Mona K; Wilson, Lindsay; Sittig, Dean F; Espadas, Donna; Davis, Traber; Singh, Hardeep

    2010-01-01

    Objective Electronic medical records (EMRs) facilitate abnormal test result communication through “alert” notifications. The aim was to evaluate how primary care providers (PCPs) manage alerts related to critical diagnostic test results on their EMR screens, and compare alert-management strategies of providers with high versus low rates of timely follow-up of results. Design 28 PCPs from a large, tertiary care Veterans Affairs Medical Center (VAMC) were purposively sampled according to their rates of timely follow-up of alerts, determined in a previous study. Using techniques from cognitive task analysis, participants were interviewed about how and when they manage alerts, focusing on four alert-management features to filter, sort and reduce unnecessary alerts on their EMR screens. Results Provider knowledge of alert-management features ranged between 4% and 75%. Almost half (46%) of providers did not use any of these features, and none used more than two. Providers with higher versus lower rates of timely follow-up used the four features similarly, except one (customizing alert notifications). Providers with low rates of timely follow-up tended to manually scan the alert list and process alerts heuristically using their clinical judgment. Additionally, 46% of providers used at least one workaround strategy to manage alerts. Conclusion Considerable heterogeneity exists in provider use of alert-management strategies; specific strategies may be associated with lower rates of timely follow-up. Standardization of alert-management strategies including improving provider knowledge of appropriate tools in the EMR to manage alerts could reduce the lack of timely follow-up of abnormal diagnostic test results. PMID:20064805

  5. Prenatal diagnosis: choices women make about pursuing testing and acting on abnormal results.

    PubMed

    Pryde, P G; Drugan, A; Johnson, M P; Isada, N B; Evans, M I

    1993-09-01

    Liberalization of abortion laws in several US states (e.g., New York and California) coincided with the development of prenatal techniques, which diagnose chromosomal abnormalities and biochemical disorders. Increased use of prenatal diagnostic services has not been accompanied by adequate examination of the decision making process women undergo when contemplating prenatal diagnosis, pregnancy termination, or experimental fetal therapy. The limited literature exploring these issues indicates that many women do not know as much as possible about the health of their fetus. Women who are at risk of abnormal pregnancy tend to become distressed and willing to accept invasive testing, even when they know the significant, albeit low, risks of such testing. Women's perceptions of risk, which stem from complex psychologic-phenomena, are likely to be very inconsistent with objective reality. Neither counseling nor education can easily change these misperceptions. Nevertheless, counseling can at least alter misperceptions enough so they move closer to objective reality. On the other hand, counseling can sway perceptions and choices made based on these perceptions. Decision making is even more complex and emotional when women encounter abnormalities. Considerable social, moral, and psychologic factors influence this process, making this a very problematic area to study. Almost all women who carry an abnormal fetus with a very serious prognosis and a high degree of diagnostic certainty chose to terminate the pregnancy. The decision is much more difficult for women carrying a fetus with less diagnostic or prognostic certainty. Insufficient data exists to determine how they handle these management decisions. Women tend to opt for abortion in cases of chromosomal abnormalities, regardless of the severity or certainty of the outcome. Women carrying a fetus with anatomic disorders with prognostic uncertainty or less severity choose to abort at lower rates. More research is needed to

  6. Response to an abnormal ovarian cancer-screening test result: test of the social cognitive processing and cognitive social health information processing models.

    PubMed

    Andrykowski, Michael A; Pavlik, Edward J

    2011-04-01

    All cancer screening tests produce a proportion of abnormal results requiring follow up. Consequently, the cancer-screening setting is a natural laboratory for examining psychological and behavioural response to a threatening health-related event. This study tested hypotheses derived from the social cognitive processing and cognitive-social health information processing models in trying to understand response to an abnormal ovarian cancer (OC) screening test result. Women (n = 278) receiving an abnormal screening test result a mean of 7 weeks earlier were assessed prior to a repeat screening test intended to clarify their previous abnormal result. Measures of disposition (optimism, informational coping style), social environment (social support and constraint), emotional processing, distress, and benefit finding were obtained. Regression analyses indicated greater distress was associated with greater social constraint and emotional processing and a monitoring coping style in women with a family history of OC. Distress was unrelated to social support. Greater benefit finding was associated with both greater social constraint and support and greater distress. The primacy of social constraint in accounting for both benefit finding and distress was noteworthy and warrants further research on the role of social constraint in adaptation to stressful events.

  7. Developing Software to “Track and Catch” Missed Follow-up of Abnormal Test Results in a Complex Sociotechnical Environment

    PubMed Central

    Smith, M.; Murphy, D.; Laxmisan, A.; Sittig, D.; Reis, B.; Esquivel, A.; Singh, H.

    2013-01-01

    Summary Background Abnormal test results do not always receive timely follow-up, even when providers are notified through electronic health record (EHR)-based alerts. High workload, alert fatigue, and other demands on attention disrupt a provider’s prospective memory for tasks required to initiate follow-up. Thus, EHR-based tracking and reminding functionalities are needed to improve follow-up. Objectives The purpose of this study was to develop a decision-support software prototype enabling individual and system-wide tracking of abnormal test result alerts lacking follow-up, and to conduct formative evaluations, including usability testing. Methods We developed a working prototype software system, the Alert Watch And Response Engine (AWARE), to detect abnormal test result alerts lacking documented follow-up, and to present context-specific reminders to providers. Development and testing took place within the VA’s EHR and focused on four cancer-related abnormal test results. Design concepts emphasized mitigating the effects of high workload and alert fatigue while being minimally intrusive. We conducted a multifaceted formative evaluation of the software, addressing fit within the larger socio-technical system. Evaluations included usability testing with the prototype and interview questions about organizational and workflow factors. Participants included 23 physicians, 9 clinical information technology specialists, and 8 quality/safety managers. Results Evaluation results indicated that our software prototype fit within the technical environment and clinical workflow, and physicians were able to use it successfully. Quality/safety managers reported that the tool would be useful in future quality assurance activities to detect patients who lack documented follow-up. Additionally, we successfully installed the software on the local facility’s “test” EHR system, thus demonstrating technical compatibility. Conclusion To address the factors involved in missed

  8. Timely Follow-Up of Abnormal Diagnostic Imaging Test Results in an Outpatient Setting: Are Electronic Medical Records Achieving Their Potential?

    PubMed Central

    Singh, Hardeep; Thomas, Eric J.; Mani, Shrinidi; Sittig, Dean; Arora, Harvinder; Espadas, Donna; Khan, Myrna M.; Petersen, Laura A.

    2010-01-01

    Background Given the fragmentation of outpatient care, timely follow-up of abnormal diagnostic test results remains a challenge. We hypothesized that an EMR that facilitates the transmission and availability of critical imaging results through either automated notification (alerting) or direct access to the primary report would eliminate this problem. Methods We studied critical imaging alert notifications in the outpatient setting of a tertiary care VA facility from November 2007 to June 2008. Tracking software determined whether the alert was acknowledged (i.e. provider opened the message for viewing) within two weeks of transmission; acknowledged alerts were considered read. We reviewed medical records and contacted providers to determine timely follow-up actions (e.g. ordering a follow-up test or consultation) within 4 weeks of transmission. Multivariable logistic regression models accounting for clustering effect by providers analyzed predictors for two outcomes; lack of acknowledgment and lack of timely follow-up. Results Of 123,638 studies (including X-rays, CT scans, ultrasounds, MRI and mammography), 1196 (0.97%) images generated alerts; 217 (18.1%) of these were unacknowledged. Alerts had a higher risk of being unacknowledged when ordering providers were trainees (OR, 5.58;95%CI, 2.86-10.89) and when dual (more than one provider alerted) as opposed to single communication was used (OR, 2.02;95%CI, 1.22-3.36). Timely follow-up was lacking in 92 (7.7% of all alerts) and was similar for acknowledged and unacknowledged alerts (7.3% vs. 9.7%;p=0.2). Risk for lack of timely follow-up was higher with dual communication (OR,1.99;95%CI, 1.06-3.48) but lower when additional verbal communication was used by the radiologist (OR, 0.12;95%CI: 0.04-0.38). Nearly all abnormal results lacking timely follow-up at 4 weeks were eventually found to have measurable clinical impact in terms of further diagnostic testing or treatment. Conclusions Critical imaging results may not

  9. The probability for a Pap test to be abnormal is directly proportional to HPV viral load: results from a Swiss study comparing HPV testing and liquid-based cytology to detect cervical cancer precursors in 13,842 women.

    PubMed

    Bigras, G; de Marval, F

    2005-09-01

    In a study involving 13,842 women and 113 gynaecologists, liquid-based cytology and HPV testing for detecting cervical cancer were compared. A total of 1334 women were found to be positive for one or both tests and were invited for colposcopy with biopsy. A total of 1031 satisfactory biopsies on 1031 women were thereafter collected using a systematic biopsy protocol, which was random in the colposcopically normal-appearing cervix or directed in the abnormal one. In all, 502 women with negative tests were also biopsied. A total of 82 histologic high-grade squamous intraepithelial lesion (HSIL) were reported in biopsies, all from the group with one or both tests positive. Sensitivity and specificity to detect histologic HSIL were 59 and 97% for cytology, and 97 and 92% for HPV. In total, 14% of reviewed negative cytological preparations associated with histologic HSIL contained no morphologically abnormal cells despite a positive HPV test. This suggested a theoretical limit for cytology sensitivity. HPV viral load analysis of the 1143 HPV-positive samples showed a direct relationship between abnormal Pap test frequency and HPV viral load. Thus, not only does the HPV testing have a greater sensitivity than cytology but the probability of the latter being positive can also be defined as a function of the associated HPV viral load. PMID:16136031

  10. The probability for a Pap test to be abnormal is directly proportional to HPV viral load: results from a Swiss study comparing HPV testing and liquid-based cytology to detect cervical cancer precursors in 13 842 women

    PubMed Central

    Bigras, G; de Marval, F

    2005-01-01

    In a study involving 13 842 women and 113 gynaecologists, liquid-based cytology and HPV testing for detecting cervical cancer were compared. A total of 1334 women were found to be positive for one or both tests and were invited for colposcopy with biopsy. A total of 1031 satisfactory biopsies on 1031 women were thereafter collected using a systematic biopsy protocol, which was random in the colposcopically normal-appearing cervix or directed in the abnormal one. In all, 502 women with negative tests were also biopsied. A total of 82 histologic high-grade squamous intraepithelial lesion (HSIL) were reported in biopsies, all from the group with one or both tests positive. Sensitivity and specificity to detect histologic HSIL were 59 and 97% for cytology, and 97 and 92% for HPV. In total, 14% of reviewed negative cytological preparations associated with histologic HSIL contained no morphologically abnormal cells despite a positive HPV test. This suggested a theoretical limit for cytology sensitivity. HPV viral load analysis of the 1143 HPV-positive samples showed a direct relationship between abnormal Pap test frequency and HPV viral load. Thus, not only does the HPV testing have a greater sensitivity than cytology but the probability of the latter being positive can also be defined as a function of the associated HPV viral load. PMID:16136031

  11. Low yield of unselected testing in patients with acutely abnormal liver function tests

    PubMed Central

    Chadwick, Andrew

    2015-01-01

    Objectives To audit the diagnostic yield and cost implications of the use of a ‘liver screen’ for inpatients with abnormal liver function tests. Design We performed a retrospective audit of inpatients with abnormal liver function tests. We analysed all investigations ordered including biochemistry, immunology, virology and radiology. The final diagnosis was ascertained in each case, and the diagnostic yield and cost per positive diagnosis for each investigation were calculated. Setting St Thomas’ NHS Trust. Participants All inpatients investigated for abnormal liver function tests over a 12-month period. Main outcome measures We calculated the percentage of courses due to each diagnosis, the yield of each investigation and the cost per positive diagnosis for each investigation. Results A total of 308 patients were included, and a final diagnosis was made in 224 patients (73%) on the basis of both clinical data and investigations. There was considerable heterogeneity in the tests included in an acute liver screen. History and ultrasound yielded the most diagnoses (40% and 30%, respectively). The yield of autoimmune and metabolic screens was minimal. Conclusions Our results demonstrate the low yield of unselected testing in patients with abnormal liver function tests. A thorough history, ultrasound and testing for blood-borne viruses are the cornerstones of diagnosis. Specialist input should be sought before further testing. Prospective studies to evaluate the yield and cost-effectiveness of different testing strategies are needed. PMID:26770816

  12. Abnormal Head Impulse Test in a Unilateral Cerebellar Lesion

    PubMed Central

    Baek, Seol-Hee; Jung, Jin-Man; Kwon, Do-Young; Park, Moon Ho; Choi, June; Kim, Ji-Soo

    2015-01-01

    Background The findings of head impulse tests (HIT) are usually normal in cerebellar lesions. Case Report A 46-year-old male presented with progressive dizziness and imbalance of 3 weeks duration. The patient exhibited catch-up saccades during bedside horizontal HIT to either side, which was more evident during the rightward HIT. However, results of bithermal caloric tests and rotatory chair test were normal. MRI revealed a lesion in the inferior cerebellum near the flocculus. Conclusions This case provides additional evidence that damage to the flocculus or its connections may impair the vestibulo-ocular reflex only during high-speed stimuli, especially when the stimuli are applied to the contralesional side. By observing accompanying cerebellar signs, the abnormal HIT findings caused by a cerebellar disorder can be distinguished from those produced by peripheral vestibular disorders. PMID:25749819

  13. GIRAFFE test results summary

    SciTech Connect

    Yokobori, S.; Arai, K.; Oikawa, H.

    1996-03-01

    A passive system can provide engineered safety features enhancing safety system reliability and plant simplicity. Toshiba has conducted the test Program to demonstrate the feasibility of the SBWR passive safety system using a full-height, integral system test facility GIRAFFE. The test facility GIRAFFE models the SBWR in full height to correctly present the gravity driving head forces with a 1/400 volume scale. The GIRAFFE test Program includes the certification tests of the passive containment cooling system (PCCS) to remove the post-accident decay heat and the gravity driven cooling system (GDCS) to replenish the reactor coolant inventory during a LOCA. The test results have confirmed the PCCS and GDCS design and in addition, have demonstrated the operation of the pCCS with the presence of a lighter-than-steam noncondensable as well as with the presence of a heavier-than-steam, noncondensable. The GIRAFFE test Program has also provided the database to qualify a best estimate thermal-hydraulic computer code TRAC. The post test analysis results have shown that TRAC can accurately predict the PCCS heat removal Performance and the containment pressure response to a LOCA. This paper summarizes the GIRAFFE test results to investigate post-LOCA PCCS heat removal performance and post-test analysis using TRAC.

  14. [The general practitioner and abnormal liver function tests].

    PubMed

    Hallez, R

    1997-09-01

    In case of abnormal liver function tests, it's necessary to distinguish different situations, starting from this first data. We will successively consider: the high and moderate acute increases of aminotransferase, the chronic increases of aminotransferase, the isolated cholestase picture and the isolated increases of gamma GT or of bilirubine. We will finish with a partial survey about drug-induced liver diseases.

  15. Your Kidney Test Results

    MedlinePlus

    ... Important Tests Blood Pressure Serum Albumin Bicarbonate Blood Urea Nitrogen (BUN) Potassium Calcium Phosphorus Results Goal: Your ... level in your blood. BUN checks how much urea, a waste product, is in your blood. Potassium ...

  16. Abnormal Liver Function Tests in an Anorexia Nervosa Patient and an Atypical Manifestation of Refeeding Syndrome

    PubMed Central

    Vootla, Vamshidhar R.; Daniel, Myrta

    2015-01-01

    Refeeding syndrome is defined as electrolyte and fluid abnormalities that occur in significantly malnourished patients when they are refed orally, enterally, or parenterally. The principal manifestations include hypophosphatemia, hypokalemia, vitamin deficiencies, volume overload and edema. This can affect multiple organ systems, such as the cardiovascular, pulmonary, or neurological systems, secondary to the above-mentioned abnormalities. Rarely, patients may develop gastrointestinal symptoms and show abnormal liver function test results. We report the case of a 52-year-old woman with anorexia nervosa who developed refeeding syndrome and simultaneous elevations of liver function test results, which normalized upon the resolution of the refeeding syndrome. PMID:26351414

  17. Abnormal Liver Function Tests in an Anorexia Nervosa Patient and an Atypical Manifestation of Refeeding Syndrome.

    PubMed

    Vootla, Vamshidhar R; Daniel, Myrta

    2015-01-01

    Refeeding syndrome is defined as electrolyte and fluid abnormalities that occur in significantly malnourished patients when they are refed orally, enterally, or parenterally. The principal manifestations include hypophosphatemia, hypokalemia, vitamin deficiencies, volume overload and edema. This can affect multiple organ systems, such as the cardiovascular, pulmonary, or neurological systems, secondary to the above-mentioned abnormalities. Rarely, patients may develop gastrointestinal symptoms and show abnormal liver function test results. We report the case of a 52-year-old woman with anorexia nervosa who developed refeeding syndrome and simultaneous elevations of liver function test results, which normalized upon the resolution of the refeeding syndrome.

  18. Abnormal ventilation scans in middle-aged smokers. Comparison with tests of overall lung function

    SciTech Connect

    Barter, S.J.; Cunningham, D.A.; Lavender, J.P.; Gibellino, F.; Connellan, S.J.; Pride, N.B.

    1985-07-01

    The uniformity of regional ventilation during tidal breathing has been assessed using continuous inhalation of krypton-81m in 43 male, lifelong nonsmokers and 46 male, current cigarette smokers (mean daily consumption 24.1 cigarettes/day) between 44 and 61 yr of age and with mild or no respiratory symptoms. All subjects had normal chest radiographs. The results of the ventilation scans were compared with tests of overall lung function (spirometry, maximal expiratory flow-volume curves, and single-breath N2 test). Diffuse abnormalities of the ventilation scan were found in 19 (41%) of the 46 smokers but in none of the nonsmokers. Focal abnormalities were found in 7 smokers and 3 nonsmokers. Smokers showed the expected abnormalities in overall lung function (reduced FEV1 and VC, increased single-breath N2 slope, and closing volume), but in individual smokers there was only a weak relation between the severity of abnormality of overall lung function and an abnormal ventilation scan. Abnormal scans could be found when overall lung function was normal and were not invariably found when significant abnormalities in FEV1/VC or N2 slope were present. There was no relation between the presence of chronic expectoration and an abnormal scan. The prognostic significance of an abnormal ventilation scan in such smokers remains to be established.

  19. Undulator Transportation Test Results

    SciTech Connect

    Wolf, Zachary; Horton, Nick; Kharakh, David; Levashov, Yurii; Nuhn, Heinz-Dieter; Poling, Ben; Reese, Ed; /SLAC

    2010-11-17

    A test was performed to determine whether transporting and handling the undulators makes any changes to their properties. This note documents the test. No significant changes to the test undulator were observed. After the LCLS undulators are tuned and fiducialized in the Magnetic Measurement Facility (MMF), they must be transported to storage buildings and transported to the tunnel. It has been established that the undulators are sensitive to temperature. We wish to know whether the undulators are also sensitive to the vibrations and shocks of transportation. To study this issue, we performed a test in which an undulator was measured in the MMF, transported to the tunnel, brought back to the MMF, and re-measured. This note documents the test and the results.

  20. Lithium cell test results

    NASA Technical Reports Server (NTRS)

    Bragg, B. J.

    1977-01-01

    Three lithium SO2 cells, two lithium CF cells, and a vinyl chloride cell, all with crimped seals, and all strictly experimental, were independently discharged on resistors. Three temperatures were used and several different storage temperatures. Discharge rate generally on the nominal discharges were 0.1 amp, 0.5 amp, and 1 amp. Tests results show that the crimp seals are inadequate, especially for the SO2 cells. Normal discharges present no hazards. All cells discharge to zero. The problem of lithium cell explosions, such as occurred during off-limits testing, is discussed.

  1. Identification of an abnormal beryllium lymphocyte proliferation test.

    PubMed

    Frome, Edward L; Newman, Lee S; Cragle, Donna L; Colyer, Shirley P; Wambach, Paul F

    2003-02-01

    The potential hazards from exposure to beryllium or beryllium compounds in the workplace were first reported in the 1930s. The tritiated thymidine beryllium lymphocyte proliferation test (BeLPT) is an in vitro blood test that is widely used to screen beryllium exposed workers in the nuclear industry for sensitivity to beryllium. The clinical significance of the BeLPT was described and a standard protocol was developed in the late 1980s. Cell proliferation is measured by the incorporation of tritiated thymidine into dividing cells on two culture dates and using three concentrations of beryllium sulfate. Results are expressed as a 'stimulation index' (SI) which is the ratio of the amount of tritiated thymidine (measured by beta counts) in the simulated cells divided by the counts for the unstimulated cells on the same culture day. Several statistical methods for use in the routine analysis of the BeLPT were proposed in the early 1990s. The least absolute values (LAV) method was recommended for routine analysis of the BeLPT. This report further evaluates the LAV method using new data, and proposes a new method for identification of an abnormal or borderline test. This new statistical-biological positive (SBP) method reflects the clinical judgment that: (i) at least two SIs show a 'positive' response to beryllium; and (ii) that the maximum of the six SIs must exceed a cut-point that is determined from a reference data set of normal individuals whose blood has been tested by the same method in the same serum. The new data is from the Y-12 National Security Complex in Oak Ridge (Y-12) and consists of 1080 workers and 33 non-exposed control BeLPTs (all tested in the same serum). Graphical results are presented to explain the statistical method, and the new SBP method is applied to the Y-12 group. The true positive rate and specificity of the new method were estimated to be 86% and 97%, respectively. An electronic notebook that is accessible via the Internet was used in

  2. The value of Bayes' theorem for interpreting abnormal test scores in cognitively healthy and clinical samples.

    PubMed

    Gavett, Brandon E

    2015-03-01

    The base rates of abnormal test scores in cognitively normal samples have been a focus of recent research. The goal of the current study is to illustrate how Bayes' theorem uses these base rates--along with the same base rates in cognitively impaired samples and prevalence rates of cognitive impairment--to yield probability values that are more useful for making judgments about the absence or presence of cognitive impairment. Correlation matrices, means, and standard deviations were obtained from the Wechsler Memory Scale--4th Edition (WMS-IV) Technical and Interpretive Manual and used in Monte Carlo simulations to estimate the base rates of abnormal test scores in the standardization and special groups (mixed clinical) samples. Bayes' theorem was applied to these estimates to identify probabilities of normal cognition based on the number of abnormal test scores observed. Abnormal scores were common in the standardization sample (65.4% scoring below a scaled score of 7 on at least one subtest) and more common in the mixed clinical sample (85.6% scoring below a scaled score of 7 on at least one subtest). Probabilities varied according to the number of abnormal test scores, base rates of normal cognition, and cutoff scores. The results suggest that interpretation of base rates obtained from cognitively healthy samples must also account for data from cognitively impaired samples. Bayes' theorem can help neuropsychologists answer questions about the probability that an individual examinee is cognitively healthy based on the number of abnormal test scores observed.

  3. Disposition of sperm donors with resultant abnormal pregnancies.

    PubMed

    Kuller, J A; Meyer, W R; Traynor, K D; Hartmann, K E

    2001-08-01

    We wished to determine how clinicians manage sperm donors whose offspring have chromosomal or structural abnormalities. A directed, multiple-choice survey was given to reproductive endocrinologists and obstetrical geneticists to assess management of sperm donors whose offspring have chromosomal or structural abnormalities. The questionnaire was completed by 66 reproductive endocrinologists and obstetrical geneticists. Abnormalities and the most common inheritance modes included: Trisomy 21 (aneuploidy, maternal origin), Turner syndrome (aneuploidy, paternal origin), cleft lip/palate (multifactorial), VATER sequence (vertebral defects, imperforate anus, tracheo-esophageal fistula, radial and renal dysplasia, sporadic inheritance), and Hurler syndrome (autosomal recessive). Response choices were: (i) remove donor from programme, (ii) inform potential recipients of prior pregnancy outcomes and continue to use donor, or (iii) further study donor to assess karyotype/mutations. Inheritance mode appeared to influence decisions to remove donors from sperm banks; however, no clear consensus was noted. Guidelines exist for screening potential gamete donors, but not for managing donors whose offspring has a chromosomal or structural abnormality. Guidelines must be developed to manage sperm donors with untoward pregnancy outcomes. PMID:11473942

  4. Mining association rules between abnormal health examination results and outpatient medical records.

    PubMed

    Chao Huang, Yi

    2013-01-01

    Currently, interpretation of health examination reports relies primarily on the physician's own experience. If health screening data could be integrated with outpatient medical records to uncover correlations between disease and abnormal test results, the physician could benefit from having additional reference resources for medical examination report interpretation and clinic diagnosis. This study used the medical database of a regional hospital in Taiwan to illustrate how association rules can be found between abnormal health examination results and outpatient illnesses. The rules can help to build up a disease-prevention knowledge database that assists healthcare providers in follow-up treatment and prevention. Furthermore, this study proposes a new algorithm, the data cutting and sorting method, or DCSM, in place of the traditional Apriori algorithm. DCSM significantly improves the mining performance of Apriori by reducing the time to scan health examination and outpatient medical records, both of which are databases of immense sizes.

  5. Pressure locking test results

    SciTech Connect

    DeWall, K.G.; Watkins, J.C.; McKellar, M.G.; Bramwell, D.

    1996-12-01

    The U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Regulatory Research, is funding the Idaho National Engineering Laboratory (INEL) in performing research to provide technical input for their use in evaluating responses to Generic Letter 95-07, {open_quotes}Pressure Locking and Thermal Binding of Safety-Related Power-Operated Gate Valves.{close_quotes} Pressure locking and thermal binding are phenomena that make a closed gate valve difficult to open. This paper discusses only the pressure locking phenomenon in a flexible-wedge gate valve; the authors will publish the results of their thermal binding research at a later date. Pressure locking can occur when operating sequences or temperature changes cause the pressure of the fluid in the bonnet (and, in most valves, between the discs) to be higher than the pressure on the upstream and downstream sides of the disc assembly. This high fluid pressure presses the discs against both seats, making the disc assembly harder to unseat than anticipated by the typical design calculations, which generally consider friction at only one of the two disc/seat interfaces. The high pressure of the bonnet fluid also changes the pressure distribution around the disc in a way that can further contribute to the unseating load. If the combined loads associated with pressure locking are very high, the actuator might not have the capacity to open the valve. The results of the NRC/INEL research discussed in this paper show that the relationship between bonnet pressure and pressure locking stem loads appears linear. The results also show that for this valve, seat leakage affects the bonnet pressurization rate when the valve is subjected to thermally induced pressure locking conditions.

  6. Pressure locking test results

    SciTech Connect

    DeWall, K.G.; Watkins, J.C.; McKellar, M.G.; Bramwell, D.

    1996-06-01

    The U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Regulatory Research, is funding the Idaho National Engineering Laboratory (INEL) in performing research to provide technical input for their use in evaluating responses to Generic Letter 95-07, {open_quotes}Pressure Locking and Thermal Binding of Safety-Related Power-Operated Gate Valves.{close_quotes} Pressure locking and thermal binding are phenomena that make a closed gate valve difficult to open. This paper discusses only the pressure locking phenomenon in a flexible-wedge gate valve; we will publish the results of our thermal binding research at a later date. Pressure locking can occur when operating sequences or temperature changes cause the pressure of the fluid in the bonnet (and, in most valves, between the discs) to be higher than the pressure on the upstream and downstream sides of the disc assembly. This high fluid pressure presses the discs against both seats, making the disc assembly harder to unseat than anticipated by the typical design calculations, which generally consider friction at only one of the two disc/seat interfaces. The high pressure of the bonnet fluid also changes the pressure distribution around the disc in a way that can further contribute to the unseating load. If the combined loads associated with pressure locking are very high, the actuator might not have the capacity to open the valve. The results of the NRC/INEL research discussed in this paper show that the relationship between bonnet pressure and pressure locking stem loads appears linear. The results also show that for this valve, seat leakage affects the bonnet pressurization rate when the valve is subjected to thermally induced pressure locking conditions.

  7. Organic Separation Test Results

    SciTech Connect

    Russell, Renee L.; Rinehart, Donald E.; Peterson, Reid A.

    2014-09-22

    Separable organics have been defined as “those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer” (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be “no visible layer” of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.

  8. Liver Function Test Abnormalities in Patients with Inflammatory Bowel Diseases: A Hospital-based Survey

    PubMed Central

    Cappello, Maria; Randazzo, Claudia; Bravatà, Ivana; Licata, Anna; Peralta, Sergio; Craxì, Antonio; Almasio, Piero Luigi

    2014-01-01

    BACKGROUND AND AIMS Inflammatory bowel diseases (IBD) are frequently associated with altered liver function tests (LFTs). The causal relationship between abnormal LFTs and IBD is unclear. The aim of our study was to evaluate the prevalence and etiology of LFTs abnormalities and their association with clinical variables in a cohort of IBD patients followed up in a single center. MATERIALS AND METHODS A retrospective review was undertaken of all consecutive IBD in- and outpatients routinely followed up at a single referral center. Clinical and demographic parameters were recorded. Subjects were excluded if they had a previous diagnosis of chronic liver disease. LFT abnormality was defined as an increase in aspartate aminotransferase, (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP), gamma-glutamyl transpeptidase (GGT), or total bilirubin. RESULTS A cohort of 335 patients (179 males, mean age 46.0 ± 15.6 years) was analyzed. Abnormal LFTs were detected in 70 patients (20.9%). In most cases, the alterations were mild and spontaneously returned to normal values in about 60% of patients. Patients with abnormal LFTs were less frequently on treatment with aminosalicylates (22.8 vs. 36.6%, P = 0.04). The most frequent cause for transient abnormal LFTs was drug-induced cholestasis (34.1%), whereas fatty liver was the most frequent cause of persistent liver damage (65.4%). A cholestatic pattern was found in 60.0% of patients and was mainly related to older age, longer duration of disease, and hypertension. CONCLUSIONS The prevalence of LFT abnormalities is relatively high in IBD patients, but the development of severe liver injury is exceptional. Moreover, most alterations of LFTs are mild and spontaneously return to normal values. Drug-induced hepatotoxicity and fatty liver are the most relevant causes of abnormal LFTs in patients with IBD. PMID:24966712

  9. Test and analysis on the abnormal noise of the ultrasonic detection device

    NASA Astrophysics Data System (ADS)

    Li, Guangya; Yang, Mingliang; Wang, Mingquan; Tan, Qiulin; Duan, Nengquan

    2014-03-01

    For the phenomenon that the abnormal noise appear suddenly when the ultrasonic detection device works at the rate of 800mm/min, a vibration testing for this detection device is designed and investigated in this paper. Deep analysis are carried out based on the experimental modal analysis method of point excitation with multiple point three vectors in response and spectrum analysis method. The analysis results demonstrate the main reasons of the abnormal noise, which is due to the resonance between the motor and the ultrasonic station.

  10. Lack of tryptophan hydroxylase-1 in mice results in gait abnormalities.

    PubMed

    Suidan, Georgette L; Duerschmied, Daniel; Dillon, Gregory M; Vanderhorst, Veronique; Hampton, Thomas G; Wong, Siu Ling; Voorhees, Jaymie R; Wagner, Denisa D

    2013-01-01

    The role of peripheral serotonin in nervous system development is poorly understood. Tryptophan hydroxylase-1 (TPH1) is expressed by non-neuronal cells including enterochromaffin cells of the gut, mast cells and the pineal gland and is the rate-limiting enzyme involved in the biosynthesis of peripheral serotonin. Serotonin released into circulation is taken up by platelets via the serotonin transporter and stored in dense granules. It has been previously reported that mouse embryos removed from Tph1-deficient mothers present abnormal nervous system morphology. The goal of this study was to assess whether Tph1-deficiency results in behavioral abnormalities. We did not find any differences between Tph1-deficient and wild-type mice in general motor behavior as tested by rotarod, grip-strength test, open field and beam walk. However, here we report that Tph1 (-/-) mice display altered gait dynamics and deficits in rearing behavior compared to wild-type (WT) suggesting that tryptophan hydroxylase-1 expression has an impact on the nervous system. PMID:23516593

  11. The Status of Spectral EEG Abnormality as a Diagnostic Test for Schizophrenia

    PubMed Central

    Boutros, Nash N.; Arfken, Cynthia; Galderisi, Silvana; Warrick, Joshua; Pratt, Garrett; Iacono, William

    2008-01-01

    Objective A literature review was conducted to ascertain whether or not EEG spectral abnormalities are consistent enough to warrant additional effort towards developing them into a clinical diagnostic test for schizophrenia. Methods Fifty three papers met criteria for inclusion into the review and 15 were included in a meta-analysis of the degree of significance of EEG deviations as compared to healthy controls. Studies were classified based on a 4-step approach based on guidelines for evaluating the clinical usefulness of a diagnostic test. Results Our review and meta-analysis revealed that most of the abnormalities are replicated in the expected directions with the most consistent results related to the increased preponderance of slow rhythms in schizophrenia patients. This effect remained consistent in un-medicated patients. Only a small number of studies provided data on the sensitivity and specificity of the findings in differentiating among the psychiatric disorders that frequently appear on the same differential diagnostic list as schizophrenia (step 3 studies). No multicenter studies using standardized assessment criteria were found (step 4 studies). Conclusions Additional Step 3 and Step 4 studies are needed to draw conclusions on the usefulness of EEG spectral abnormalities as a diagnostic test for schizophrenia PMID:18160260

  12. Computer-enhanced thallium scintigrams in asymptomatic men with abnormal exercise tests

    SciTech Connect

    Uhl, G.S.; Kay, T.N.; Hickman, J.R., Jr.

    1981-12-01

    The usefulness of computer-enhanced thallium-201 myocardial perfusion scintigraphy in excluding the diagnosis of coronary artery disease in asymptomatic patients showing abnormal exercise electrocardiograms is evaluated. Multigated thallium scans were obtained immediately following and 3 or 4 hours after maximal exercise testing in 191 consecutive asymptomatic Air Force aircrew members who had shown abnormal exercise electrocardiograms and who were due to undergo coronary angiography. Computer enhancement of the raw images is found to lead to four false positive and two false negative scintigrams as revealed by angiographic results, while the group of 15 with subcritical coronary disease exhibited equivocal results. Results reveal that enhanced thallium scintigrams are an accurate diagnostics tool in detecting myocardial ischemia in asymptomatic patients and may be used in counseling asymptomatic patients on their likelihood of having coronary artery disease.

  13. Prevalence and Determinants of True Thyroid Dysfunction Among Pediatric Referrals for Abnormal Thyroid Function Tests

    PubMed Central

    Lahoti, Amit; Klein, Jason; Schumaker, Tiffany; Vuguin, Patricia; Frank, Graeme

    2016-01-01

    Background/Aims. Abnormalities in thyroid function tests (TFTs) are a common referral reason for pediatric endocrine evaluation. However, a sizable proportion of these laboratory abnormalities do not warrant therapy or endocrine follow-up. The objectives of this study were (a) to evaluate the prevalence of true thyroid dysfunction among pediatric endocrinology referrals for abnormal TFTs; (b) to identify the historical, clinical, and laboratory characteristics that predict decision to treat. Methods. This was a retrospective chart review of patients evaluated in pediatric endocrinology office during a weekly clinic designated for new referrals for abnormal TFTs in 2010. Results. A total of 230 patients were included in the study. Median age at referral was 12 years (range = 2-18); 56% were females. Routine screening was cited as the reason for performing TFTs by 33% patients. Majority was evaluated for hypothyroidism (n = 206). Elevated thyroid-stimulating hormone was the most common referral reason (n = 140). A total of 41 out of 206 patients were treated for hypothyroidism. Conclusions. Prevalence of hypothyroidism was 20%. Thyroid follow-up was not recommended for nearly one third of the patients. Among all the factors analyzed, an elevated thyroid-stimulating hormone level and antithyroglobulin antibodies strongly correlated with the decision to treat (P < .005). PMID:27336020

  14. Prevalence and Determinants of True Thyroid Dysfunction Among Pediatric Referrals for Abnormal Thyroid Function Tests.

    PubMed

    Lahoti, Amit; Klein, Jason; Schumaker, Tiffany; Vuguin, Patricia; Frank, Graeme

    2016-01-01

    Background/Aims. Abnormalities in thyroid function tests (TFTs) are a common referral reason for pediatric endocrine evaluation. However, a sizable proportion of these laboratory abnormalities do not warrant therapy or endocrine follow-up. The objectives of this study were (a) to evaluate the prevalence of true thyroid dysfunction among pediatric endocrinology referrals for abnormal TFTs; (b) to identify the historical, clinical, and laboratory characteristics that predict decision to treat. Methods. This was a retrospective chart review of patients evaluated in pediatric endocrinology office during a weekly clinic designated for new referrals for abnormal TFTs in 2010. Results. A total of 230 patients were included in the study. Median age at referral was 12 years (range = 2-18); 56% were females. Routine screening was cited as the reason for performing TFTs by 33% patients. Majority was evaluated for hypothyroidism (n = 206). Elevated thyroid-stimulating hormone was the most common referral reason (n = 140). A total of 41 out of 206 patients were treated for hypothyroidism. Conclusions. Prevalence of hypothyroidism was 20%. Thyroid follow-up was not recommended for nearly one third of the patients. Among all the factors analyzed, an elevated thyroid-stimulating hormone level and antithyroglobulin antibodies strongly correlated with the decision to treat (P < .005).

  15. [Is the abnormal toxicity test still relevant for the safety of vaccines, sera and immunoglobulins?

    PubMed

    Krämer, Beate; Nagel, Margit; Duchow, Karin; Schwanig, Michael; Cussler, Klaus

    1996-01-01

    The German Pharmacopoeia (DAB) requires the abnormal toxicity test (ATT) using mice and guinea pigs as a non-specific safety test for vaccines, sera and immuno-globulines. The purpose of this project was to investigate the relevance of ATT after the introduction of GMP- and GLP-principles in the manufacturing of biological products. A great variability in the test performance became evident for the different test laboratories, involving the animal number as well as the vaccine dosage administration and test duration. The retrospective analysis of ATT results reveals reasons for the incompatibility of particular preparation groups, vaccine components or additives with the animal species used. There were highly significant differences between the manufacturers and the PEI regarding the frequency of deviating test results for identical test batches. Positive ATT"s never resulted from the insufficient quality of a batch. On the other hand vaccines causing adverse reactions in the target species were not identified by the ATT. For these reasons the abnormal toxicity test is unsuitable to detect harmful batches. The results of the analysis of data show that finally the ATT has always been passed, i.e. there was no retention by the vaccine manufacturers and no refusal by the controlling authorities due to the ATT-results. Considering the present animal model and the questionable transferability of the test results to the target species only a poor reliability is evident. Taking into account aspects of drug safety and animal welfare it is recommended to the DAB to omit the ATT.

  16. ISOCAM experiment cryogenic test results

    NASA Astrophysics Data System (ADS)

    de Sa, L.; Collaudin, B.

    The thermal requirements for ISOCAM, an IR camera to be mounted aboard the ISO satellite, are reviewed, and model predictions are matched with test results. The degree of model validation suggested by analytical prediction vs test results is described. Predictions of thermal conduction through mounting screws, from ball bearings, and of the heat distribution in the rotor and stator of a cryogenic stepper motor correlate well with actual test results. It is shown that ISOCAM meets the thermal requirements necessary for successful on-orbit operation. The model predicted such phenomena as 'chopped' motor function and the twofold increase in temperature resulting from continuous motor operation.

  17. Bilateral Sensory Abnormalities in Patients with Unilateral Neuropathic Pain; A Quantitative Sensory Testing (QST) Study

    PubMed Central

    Konopka, Karl-Heinz; Harbers, Marten; Houghton, Andrea; Kortekaas, Rudie; van Vliet, Andre; Timmerman, Wia; den Boer, Johan A.; Struys, Michel M.R.F.; van Wijhe, Marten

    2012-01-01

    In patients who experience unilateral chronic pain, abnormal sensory perception at the non-painful side has been reported. Contralateral sensory changes in these patients have been given little attention, possibly because they are regarded as clinically irrelevant. Still, bilateral sensory changes in these patients could become clinically relevant if they challenge the correct identification of their sensory dysfunction in terms of hyperalgesia and allodynia. Therefore, we have used the standardized quantitative sensory testing (QST) protocol of the German Research Network on Neuropathic Pain (DFNS) to investigate somatosensory function at the painful side and the corresponding non-painful side in unilateral neuropathic pain patients using gender- and age-matched healthy volunteers as a reference cohort. Sensory abnormalities were observed across all QST parameters at the painful side, but also, to a lesser extent, at the contralateral, non-painful side. Similar relative distributions regarding sensory loss/gain for non-nociceptive and nociceptive stimuli were found for both sides. Once a sensory abnormality for a QST parameter at the affected side was observed, the prevalence of an abnormality for the same parameter at the non-affected side was as high as 57% (for Pressure Pain Threshold). Our results show that bilateral sensory dysfunction in patients with unilateral neuropathic pain is more rule than exception. Therefore, this phenomenon should be taken into account for appropriate diagnostic evaluation in clinical practice. This is particularly true for mechanical stimuli where the 95% Confidence Interval for the prevalence of sensory abnormalities at the non-painful side ranges between 33% and 50%. PMID:22629414

  18. State Test Results Are Predictable

    ERIC Educational Resources Information Center

    Tienken, Christopher H.

    2014-01-01

    Out-of-school, community demographic and family-level variables have an important influence on student achievement as measured by large-scale standardized tests. Studies described here demonstrated that about half of the test score is accounted for by variables outside the control of teachers and school administrators. The results from these…

  19. Computer-enhanced thallium scintigrams in asymptomatic men with abnormal exercise tests

    SciTech Connect

    Uhl, G.S.; Kay, T.N.; Hickman, J.R. Jr.

    1981-12-01

    The use of treadmill testing in asymptomatic patients and those with an atypical chest pain syndrome is increasing, yet the proportion of false positive stress electrocardiograms increases as the prevalence of disease decreases. To determine the diagnostic accuracy of computer-enhanced thallium perfusion scintigraphy in this subgroup of patients, multigated thallium scans were obtained after peak exercise and 3 or 4 hours after exercise and the raw images enhanced by a computer before interpretations were made. The patient group consisted of 191 asymptomatic U.S. Air force aircrewmen who had an abnormal exercise electrocardiogram. Of these, 135 had normal coronary angiographic findings, 15 had subcritical coronary stenosis (less than 50 percent diameter narrowing) and 41 had significant coronary artery disease. Use of computer enhancement resulted in only four false positive and two false negative scintigrams. The small subgroup with subcritical coronary disease had equivocal results on thallium scintigraphy, 10 men having abnormal scans and 5 showing no defects. The clinical significance of such subcritical disease in unclear, but it can be detected with thallium scintigraphy. Thallium scintigrams that have been enhanced by readily available computer techniques are an accurate diagnostic tool even in asymptomatic patients with an easily interpretable abnormal maximal stress electrocardiogram. Thallium scans can be effectively used in counseling asymptomatic patients on the likelihood of their having coronary artery disease.

  20. Predictive value of specific ultrasound findings when used as a screening test for abnormalities on VCUG

    PubMed Central

    Logvinenko, Tanya; Chow, Jeanne S.; Nelson, Caleb P.

    2015-01-01

    Summary Background Renal and bladder ultrasound (RBUS) is often used as an initial screening test for children after urinary tract infection (UTI). The 2011 AAP guidelines specifically recommend that RBUS be performed first, with voiding cystourethrogram (VCUG) to be performed only if the ultrasound is abnormal. While prior research has suggested that RBUS is neither sensitive nor specific for VCUG findings, such as vesicoureteral reflux (VUR), it is uncertain as to whether specific RBUS findings, alone or in combination, might make RBUS more useful as a predictor of VCUG abnormalities. Aims To evaluate the association of specific RBUS with VCUG findings, and determine whether predictive models that accurately predict patients at high risk of VCUG abnormalities, based on RBUS findings, can be constructed. Methods and study sample A total of 3995 patients were identified with VCUG and RBUS performed on the same day. The RBUS and VCUG reports were reviewed and the findings were classified. Analysis was limited to patients aged 0–60 months with no prior postnatal genitourinary imaging and no history of prenatal hydronephrosis. Analysis The associations between large numbers of specific RBUS findings with abnormalities seen on VCUG were investigated. Both multivariate logistic models and a neural network machine learning algorithms were constructed to evaluate the predictive power of RBUS for VCUG abnormalities (including VUR or bladder/urethral findings). Sensitivity, specificity, predictive values and area under receiving operating curves (AUROC) of RBUS for VCUG abnormalities were determined. Results A total of 2259 patients with UTI as the indication for imaging were identified. The RBUS was reported as “normal” in 75.0%. On VCUG, any VUR was identified in 41.7%, VUR grade >II in 20.9%, and VUR grade >III in 2.8%. Many individual RBUS findings were significantly associated with VUR on VCUG. Despite these strong univariate associations, multivariate modeling

  1. Thyroid abnormalities in patients treated with lenalidomide for hematological malignancies: results of a retrospective case review.

    PubMed

    Figaro, M Kathleen; Clayton, Warren; Usoh, Chinenye; Brown, Kara; Kassim, Adetola; Lakhani, Vipul T; Jagasia, Shubhada

    2011-06-01

    Lenalidomide is an antiangiogenic drug associated with hypothyroidism. We describe a case-series of lenalidomide use in hematological cancers and the prevalence of thyroid abnormalities. We reviewed medical records of patients treated with lenalidomide at a single center form 2005 to 2010 and extracted demographic, clinical, and laboratory data. Of 170 patients with confirmed lenalidomide use (age 64.9 ± 15 years), 148 were treated for multiple myeloma and 6% had thyroid abnormalities attributable only to lenalidomide. In patients with a previous diagnosis of thyroid dysfunction, the addition of lenalidomide therapy was associated with a higher incidence of subsequent TFTF abnormality (17%) as compared to patients with no previous diagnosis of thyroid dysfunction (6%) (P=0.0001). Many patients (44%) with pre-existing disease and a change in thyroid function before or while on lenalidomide had no further follow-up of their thyroid abnormalities, Of 20 patients who did not undergo any thyroid function testing either before starting or while on lenalidomide for a median of 9.4 months (± 6.5), 35% developed new symptoms compatible with hypothyroidism, including worsened fating, constipation or cold intolerance. Symptoms of thyroid dysfunction overlap with side effects of lenalidomide. Thyroid hormone levels are not regularly evaluated in patients on lenalidomide. While on this treatment, thyroid abnormalities can occur in patients with no previous diagnoses and in patients with pre-existing abnormalities. Because symptoms of thyroid dysfunction could be alleviated by appropriate treatment, thyroid function should be evaluated during the course of lenalidomide to improve patients quality of life. PMID:21544854

  2. COLD TEST LOOP INTEGRATED TEST LOOP RESULTS

    SciTech Connect

    Abraham, TJ

    2003-10-22

    A testing facility (Cold Test Loop) was constructed and operated to demonstrate the efficacy of the Accelerated Waste Retrieval (AWR) Project's planned sluicing approach to the remediation of Silos 1 and 2 at the Fernald Environmental Management Project near Cincinnati, Ohio. The two silos contain almost 10,000 tons of radium-bearing low-level waste, which consists primarily of solids of raffinates from processing performed on ores from the Democratic Republic of Congo (commonly referred to as ''Belgium Congo ores'') for the recovery of uranium. These silos are 80 ft in diameter, 36 ft high to the center of the dome, and 26.75 ft to the top of the vertical side walls. The test facility contained two test systems, each designed for a specific purpose. The first system, the Integrated Test Loop (ITL), a near-full-scale plant including the actual equipment to be installed at the Fernald Site, was designed to demonstrate the sluicing operation and confirm the selection of a slurry pump, the optimal sluicing nozzle operation, and the preliminary design material balance. The second system, the Component Test Loop (CTL), was designed to evaluate many of the key individual components of the waste retrieval system over an extended run. The major results of the initial testing performed during July and August 2002 confirmed that the AWR approach to sluicing was feasible. The ITL testing confirmed the following: (1) The selected slurry pump (Hazleton 3-20 type SHW) performed well and is suitable for AWR application. However, the pump's motor should be upgraded to a 200-hp model and be driven by a 150-hp variable-frequency drive (VFD). A 200-hp VFD is not much more expensive and would allow the pump to operate at full speed. (2) The best nozzle performance was achieved by using 15/16-in. nozzles operated alternately. This configuration appeared to most effectively mine the surrogate. (3) The Solartron densitometer, which was tested as an alternative mass flow measurement

  3. Mobile evaporator corrosion test results

    SciTech Connect

    Rozeveld, A.; Chamberlain, D.B.

    1997-05-01

    Laboratory corrosion tests were conducted on eight candidates to select a durable and cost-effective alloy for use in mobile evaporators to process radioactive waste solutions. Based on an extensive literature survey of corrosion data, three stainless steel alloys (304L, 316L, AL-6XN), four nickel-based alloys (825, 625, 690, G-30), and titanium were selected for testing. The corrosion tests included vapor phase, liquid junction (interface), liquid immersion, and crevice corrosion tests on plain and welded samples of candidate materials. Tests were conducted at 80{degrees}C for 45 days in two different test solutions: a nitric acid solution. to simulate evaporator conditions during the processing of the cesium ion-exchange eluant and a highly alkaline sodium hydroxide solution to simulate the composition of Tank 241-AW-101 during evaporation. All of the alloys exhibited excellent corrosion resistance in the alkaline test solution. Corrosion rates were very low and localized corrosion was not observed. Results from the nitric acid tests showed that only 316L stainless steel did not meet our performance criteria. The 316L welded interface and crevice specimens had rates of 22.2 mpy and 21.8 mpy, respectively, which exceeds the maximum corrosion rate of 20 mpy. The other welded samples had about the same corrosion resistance as the plain samples. None of the welded samples showed preferential weld or heat-affected zone (HAZ) attack. Vapor corrosion was negligible for all alloys. All of the alloys except 316L exhibited either {open_quotes}satisfactory{close_quotes} (2-20 mpy) or {open_quotes}excellent{close_quotes} (<2 mpy) corrosion resistance as defined by National Association of Corrosion Engineers. However, many of the alloys experienced intergranular corrosion in the nitric acid test solution, which could indicate a susceptibility to stress corrosion cracking (SCC) in this environment.

  4. Historical data analyses and scientific knowledge suggest complete removal of the abnormal toxicity test as a quality control test.

    PubMed

    Garbe, Joerg H O; Ausborn, Susanne; Beggs, Claire; Bopst, Martin; Joos, Angelika; Kitashova, Alexandra A; Kovbasenco, Olga; Schiller, Claus-Dieter; Schwinger, Martina; Semenova, Natalia; Smirnova, Lilia; Stodart, Fraser; Visalli, Thomas; Vromans, Lisette

    2014-11-01

    In the early 1900s, the abnormal toxicity test (ATT) was developed as an auxiliary means to ensure safe and consistent antiserum production. Today, the ATT is utilized as a quality control (QC) release test according to pharmacopoeial or other regulatory requirements. The study design has not been changed since around 1940. The evidence of abnormal toxicity testing as a prediction for harmful batches is highly questionable and lacks a scientific rationale. Numerous reviews of historical ATT results have revealed that no reliable conclusions can be drawn from this QC measure. Modern pharmaceutical manufacturers have thorough control of the manufacturing process and comply with good manufacturing practice rules. Contaminants are appropriately controlled by complying with the validated manufacturing processes and strict QC batch release confirming batch-to-batch consistency. Recognizing that product safety, efficacy, and stability can be ensured with strict QC measures, nowadays most regulatory authorities do not require the ATT for most product classes. In line with the replacement, reduction, and refinement (3Rs) initiative, the test requirement has been deleted from approximately 80 monographs of the European Pharmacopoeia and for the majority of product classes in the United States. For these reasons, it is recommended that the ATT should be consistently omitted world-wide and be removed from pharmacopoeias and other regulatory requirements.

  5. Neighborhood factors associated with time to resolution following an abnormal breast or cervical cancer screening test

    PubMed Central

    Plascak, Jesse J.; Llanos, Adana A.; Pennell, Michael L.; Weier, Rory C.; Paskett, Electra D.

    2014-01-01

    Background The effect of neighborhood and healthcare access factors on cancer outcomes among patients enrolled in navigator programs is not clearly understood. This study assessed associations between: 1) neighborhood factors and diagnostic time to resolution (TTR) and, 2) geographic access and TTR following an abnormal breast or cervical cancer screening test among women participating in the Ohio Patient Navigator Research Program (OPNRP). Methods Patient (demographic, socioeconomic status [SES], home-to-clinic distance) and neighborhood (deprivation, racial segregation) characteristics of 801 women living in one of 285 census tracts (CTs) in greater Columbus, Ohio were examined. Randomization to receive navigation occurred at the clinic level. Multilevel Cox regression and spatial analysis were used to estimate effects of various factors on TTR and assess model assumptions, respectively. Results TTR increased as neighborhood deprivation increased. After adjustment for age, friend social support, education and healthcare status, the TTR among women living in a neighborhood with a moderate median household income (between $36,147 and $53,099) was shorter compared to women living in low median household income neighborhoods (< $36,147) (p < 0.05). There is little evidence that unmeasured confounders are geographically patterned. Conclusions Increased neighborhood socioeconomic deprivation was associated with longer TTR following an abnormal breast or cervical cancer screening test. Impact These results highlight the need for addressing patient- and neighborhood-level factors to reduce cancer disparities among underserved populations. PMID:25205516

  6. Amelogenin test abnormalities revealed in Belarusian population during forensic DNA analysis.

    PubMed

    Borovko, Sergey; Shyla, Alena; Korban, Victorya; Borovko, Alexandra

    2015-03-01

    Study of gender markers is a part of routine forensic genetic examination of crime scene and reference samples, paternity testing and personal identification. Amelogenin locus as a gender marker is included in majority of forensic STR kits of different manufacturers. In current study we report 11 cases of amelogenin abnormalities identified in males of Belarusian origin: 9 cases of AMELY dropout and 2 cases of AMELX dropout. Cases were obtained from forensic casework (n=9) and paternity testing (n=2) groups. In 4 out of 9 AMELY-negative cases deletion of AMELY was associated with the loss of DYS458 marker. In addition, we identified 3 males with SRY-positive XX male syndrome. Deletion of the long arm of the Y-chromosome was detected in two XX males. Loss of the major part of the Y-chromosome was identified in the third XX male. The presence of two X-chromosomes in XX males was confirmed with the use of Mentype(®) Argus X-8 PCR Amplification Kit. AMELY null allele observed in 2 out of 9 cases with AMELY dropout can be caused by mutation in the primer-binding site of AMELY allele. Primer-binding site mutations of AMELX can result in AMELX dropout identified in 2 cases with amplification failure of AMELX. Our study represents the first report and molecular genetic investigation of amelogenin abnormalities in the Belarusian population.

  7. RSG Deployment Case Testing Results

    SciTech Connect

    Owsley, Stanley L.; Dodson, Michael G.; Hatchell, Brian K.; Seim, Thomas A.; Alexander, David L.; Hawthorne, Woodrow T.

    2005-09-01

    The RSG deployment case design is centered on taking the RSG system and producing a transport case that houses the RSG in a safe and controlled manner for transport. The transport case was driven by two conflicting constraints, first that the case be as light as possible, and second that it meet a stringent list of Military Specified requirements. The design team worked to extract every bit of weight from the design while striving to meet the rigorous Mil-Spec constraints. In the end compromises were made primarily on the specification side to control the overall weight of the transport case. This report outlines the case testing results.

  8. Proposed Interventions to Decrease the Frequency of Missed Test Results

    ERIC Educational Resources Information Center

    Wahls, Terry L.; Cram, Peter

    2009-01-01

    Numerous studies have identified that delays in diagnosis related to the mishandling of abnormal test results are an import contributor to diagnostic errors. Factors contributing to missed results included organizational factors, provider factors and patient-related factors. At the diagnosis error conference continuing medical education conference…

  9. Multimodal noninvasive and invasive imaging of extracranial venous abnormalities indicative of CCSVI: Results of the PREMiSe pilot study

    PubMed Central

    2013-01-01

    viewer, upon which consensus was reached. The sensitivity and specificity were calculated using contingency tables denoting the presence or absence of vein-specific abnormality findings between all imaging modalities used individually as the benchmark. Results The sensitivity of CV + IVUS was 68.4% for the right and 90% for the left IJV and 85.7% for the azygos vein/VVs, compared to venous anomalies detected on DS. Compared to the venous anomalies detected on MRV, the sensitivity of CV + IVUS was 71.4% in right and 100% in left IJVs and 100% in the azygos vein/VVs; however, the specificity was 38.5%, 38.9% and 11.8%, respectively. The sensitivity between the two invasive imaging techniques, used as benchmarks, ranged from 72.7% for the right IJV to 90% for the azygos vein but the IVUS showed a higher rate of venous anomalies than the CV. There was excellent correspondence between identifying collateral veins on MRV and CV. Conclusions Noninvasive DS screening for the detection of venous anomalies indicative of CCSVI may be a reliable approach for identifying patients eligible for further multimodal invasive imaging testing of the IJVs. However, the noninvasive screening methods were inadequate to depict the total amount of azygos vein/VVs anomalies identified with invasive testing. This pilot study, with limited sample size, shows that both a non-invasive and invasive multimodal imaging diagnostic approach should be recommended to depict a range of extracranial venous anomalies indicative of CCSVI. However, lack of invasive testing on the study subjects whose results were negative on the DS screening and of healthy controls, limits further generalizibility of our findings. In addition, the findings from the 2 invasive techniques confirmed the existence of severe extracranial venous anomalies that significantly impaired normal blood outflow from the brain in this group of MS patients. PMID:24139135

  10. Intervention to Improve Follow-up for Abnormal Papanicolaou Tests: A Randomized Clinical Trial

    PubMed Central

    Breitkopf, Carmen Radecki; Dawson, Lauren; Grady, James J.; Breitkopf, Daniel M.; Nelson-Becker, Carolyn; Snyder, Russell R.

    2014-01-01

    Objective To evaluate the effect of a theory-based, culturally-targeted intervention on adherence to follow-up among low-income and minority women who experience an abnormal Pap test. Methods 5,049 women were enrolled and underwent Pap testing. Of these, 378 had an abnormal result and 341 (90%) were randomized to 1 of 3 groups to receive their results: Intervention (I): culturally-targeted behavioral and normative beliefs + knowledge/skills + salience + environmental constraints/barriers counseling; Active Control (AC): non-targeted behavioral and normative beliefs + knowledge/skills + salience + environmental constraints/barriers counseling; or Standard Care Only (SCO). The primary outcome was attendance at the initial follow-up appointment. Secondary outcomes included delay in care, completion of care at 18 months, state anxiety (STAI Y-6), depressive symptoms (CES-D), and distress (CDDQ). Anxiety was assessed at enrollment, notification of results, and 7–14 days later with the CDDQ and CES-D. Results 299 women were included in intent-to-treat analyses. Adherence rates were 60% (I), 54% (AC), and 58% (SCO), p=0.73. Completion rates were 39% (I) and 35% in the AC and SCO groups, p=0.77. Delay in care (in days) was (M ±SD): 58 ±75 (I), 69 ±72 (AC), and 54 ±75 (SCO), p=0.75. Adherence was associated with higher anxiety at notification, p<0.01 while delay <90 days (vs. 90+) was associated with greater perceived personal responsibility, p<0.05. Women not completing their care (vs. those who did) had higher CES-D scores at enrollment, p<0.05. Conclusions A theory-based, culturally-targeted message was not more effective than a non-targeted message or standard care in improving behavior. PMID:23730719

  11. Results of PRIM gyroscope testing

    SciTech Connect

    Cornell, R.

    1985-03-01

    The tests were designed so that motions of the gyroscope and the Partially Restrained Internal Member (PRIM) could be measured at different conditions of spin and PRIM clearance gaps. Two types of PRIM drive were tested. A round shaft configuration was used to test theory. An octagon drive was used to simulate the XM785 design.

  12. [Abnormal psychosocial development and legal responsibility--results of psychopathometric studies].

    PubMed

    Littmann, E; Friemert, K; Szewczyk, H

    1989-05-01

    The introduction (1968) of the legal concept of Grave Abnormal Development of the Personality Amounting to a Disorder into the penal code, made possible criminal deculpation on the basis of psychosocial maldevelopment. On the basis of an intelligence- and personality-diagnostic test-battery (Psychopathometry), the findings obtained in the examination of a sample of culprits on probation under this legal provision, has been compared with a control group homogeneous in respect of the significant parameters. Psychopathometric methods can and should reasonably supplement expertises of this culprits with defective psychosocial development.

  13. Test Results for CSTR Test 4

    SciTech Connect

    Lee, D.D.

    2001-05-31

    One of the 3 technologies currently being developed for the Savannah River Salt Waste Processing Program is the Small-Tank Tetraphenylborate Process (STTP). This process uses sodium tetraphenylborate to precipitate and remove radioactive Cs from the waste and monosodium titanate to sorb and remove radioactive Sr and actinides. ORNL is demonstrating this process at the 1:4000 scale using a 20-liter continuous-flow stirred tank reactor (CSTR) system. The primary goal of Test 4 was to verify that the STTP process could achieve and maintain the necessary Cs decontamination while TPB was actively decomposing. Even with TPB being decomposed by the off-normal conditions of this test, the decontaimination factor for {sup 137}Cs obtained for the filtrate from the Slurry Concentrating Tank ranged from 47,000 to 646,000, exceeding the WAC standard.

  14. Results of Aluminosilicate Inhibitor Testing

    SciTech Connect

    Wilmarth, W.R.

    2001-06-27

    The aluminosilicate scale in the 2H Evaporator has precluded operation since late 1999. The chemistry of scale formation is known but the mechanism(s) for deposition are not well understood. Tests have been conducted to determine if chemical agents could prevent aluminosilicate formation under conditions similar to Tank 43H. Additionally, particle growth inhibition is also tested.

  15. Chemical compatibility screening test results

    SciTech Connect

    Nigrey, P.J.; Dickens, T.G.

    1997-12-01

    A program for evaluating packaging components that may be used in transporting mixed-waste forms has been developed and the first phase has been completed. This effort involved the screening of ten plastic materials in four simulant mixed-waste types. These plastics were butadiene-acrylonitrile copolymer rubber, cross-linked polyethylene (XLPE), epichlorohydrin rubber, ethylene-propylene rubber (EPDM), fluorocarbon (Viton or Kel-F), polytetrafluoroethylene, high-density polyethylene (HDPE), isobutylene-isoprene copolymer rubber (butyl), polypropylene, and styrene-butadiene rubber (SBR). The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; and (4) a mixture of ketones. The testing protocol involved exposing the respective materials to 286,000 rads of gamma radiation followed by 14-day exposures to the waste types at 60{degrees}C. The seal materials were tested using vapor transport rate (VTR) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criterion of 0.9 g/hr/m{sup 2} for VTR and a specific gravity change of 10% was used. Based on this work, it was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. For specific gravity testing of liner materials, the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE offered the greatest resistance to the combination of radiation and chemicals.

  16. Ultrasonic Transducer Irradiation Test Results

    SciTech Connect

    Daw, Joshua; Palmer, Joe; Ramuhalli, Pradeep; Keller, Paul; Montgomery, Robert; Chien, Hual-Te; Kohse, Gordon; Tittmann, Bernhard; Reinhardt, Brian; Rempe, Joy

    2015-02-01

    Ultrasonic technologies offer the potential for high-accuracy and -resolution in-pile measurement of a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes. Many Department of Energy-Office of Nuclear Energy (DOE-NE) programs are exploring the use of ultrasonic technologies to provide enhanced sensors for in-pile instrumentation during irradiation testing. For example, the ability of small diameter ultrasonic thermometers (UTs) to provide a temperature profile in candidate metallic and oxide fuel would provide much needed data for validating new fuel performance models. Other ongoing efforts include an ultrasonic technique to detect morphology changes (such as crack initiation and growth) and acoustic techniques to evaluate fission gas composition and pressure. These efforts are limited by the lack of identified ultrasonic transducer materials capable of long term performance under irradiation test conditions. For this reason, the Pennsylvania State University (PSU) was awarded an ATR NSUF project to evaluate the performance of promising magnetostrictive and piezoelectric transducers in the Massachusetts Institute of Technology Research Reactor (MITR) up to a fast fluence of at least 1021 n/cm2. The goal of this research is to characterize and demonstrate magnetostrictive and piezoelectric transducer operation during irradiation, enabling the development of novel radiation-tolerant ultrasonic sensors for use in Material Testing Reactors (MTRs). As such, this test is an instrumented lead test and real-time transducer performance data is collected along with temperature and neutron and gamma flux data. The current work bridges the gap between proven out-of-pile ultrasonic techniques and in-pile deployment of ultrasonic sensors by acquiring the data necessary to demonstrate the performance of ultrasonic transducers. To date, one piezoelectric

  17. Mars Balloon Flight Test Results

    NASA Technical Reports Server (NTRS)

    Hall, Jeffery L.; Pauken, Michael T.; Kerzhanovich, Viktor V.; Walsh, Gerald J.; Kulczycki, Eric A.; Fairbrother, Debora; Shreves, Chris; Lachenmeier, Tim

    2009-01-01

    This paper describes a set of four Earth atmosphere flight test experiments on prototype helium superpressure balloons designed for Mars. Three of the experiments explored the problem of aerial deployment and inflation, using the cold, low density environment of the Earth's stratosphere at an altitude of 30-32 km as a proxy for the Martian atmosphere. Auxiliary carrier balloons were used in three of these test flights to lift the Mars balloon prototype and its supporting system from the ground to the stratosphere where the experiment was conducted. In each case, deployment and helium inflation was initiated after starting a parachute descent of the payload at 5 Pa dynamic pressure, thereby mimicking the conditions expected at Mars after atmospheric entry and high speed parachute deceleration. Upward and downward looking video cameras provided real time images from the flights, with additional data provided by onboard temperature, pressure and GPS sensors. One test of a 660 cc pumpkin balloon was highly successful, achieving deployment, inflation and separation of the balloon from the flight train at the end of inflation; however, some damage was incurred on the balloon during this process. Two flight tests of 12 m diameter spherical Mylar balloons were not successful, although some lessons were learned based on the failure analyses. The final flight experiment consisted of a ground-launched 12 m diameter spherical Mylar balloon that ascended to the designed 30.3 km altitude and successfully floated for 9.5 hours through full noontime daylight and into darkness, after which the telemetry system ran out of electrical power and tracking was lost. The altitude excursions for this last flight were +/-75 m peak to peak, indicating that the balloon was essentially leak free and functioning correctly. This provides substantial confidence that this balloon design will fly for days or weeks at Mars if it can be deployed and inflated without damage.

  18. Results of Neptunium Disposal Testing

    SciTech Connect

    Walker, D.D.

    2003-10-07

    Researchers investigated the neutralization of neptunium solution from H-Canyon Tank 16.4 and the properties of the resulting slurry. This work investigated slurry properties from a single neutralization protocol and limited storage times.

  19. Automatic recognition of abnormal cells in cytological tests using multispectral imaging

    NASA Astrophysics Data System (ADS)

    Gertych, A.; Galliano, G.; Bose, S.; Farkas, D. L.

    2010-03-01

    Cervical cancer is the leading cause of gynecologic disease-related death worldwide, but is almost completely preventable with regular screening, for which cytological testing is a method of choice. Although such testing has radically lowered the death rate from cervical cancer, it is plagued by low sensitivity and inter-observer variability. Moreover, its effectiveness is still restricted because the recognition of shape and morphology of nuclei is compromised by overlapping and clumped cells. Multispectral imaging can aid enhanced morphological characterization of cytological specimens. Features including spectral intensity and texture, reflecting relevant morphological differences between normal and abnormal cells, can be derived from cytopathology images and utilized in a detection/classification scheme. Our automated processing of multispectral image cubes yields nuclear objects which are subjected to classification facilitated by a library of spectral signatures obtained from normal and abnormal cells, as marked by experts. Clumps are processed separately with reduced set of signatures. Implementation of this method yields high rate of successful detection and classification of nuclei into predefined malignant and premalignant types and correlates well with those obtained by an expert. Our multispectral approach may have an impact on the diagnostic workflow of cytological tests. Abnormal cells can be automatically highlighted and quantified, thus objectivity and performance of the reading can be improved in a way which is currently unavailable in clinical setting.

  20. Diagnostic errors and abnormal diagnostic tests lost to follow-up: a source of needless waste and delay to treatment.

    PubMed

    Wahls, Terry

    2007-01-01

    Diagnostic errors are an important and often underappreciated source of medical error, needless delays to treatment, and needlessly wasted resources. Almost 65% of diagnostic errors have an important contribution of system errors, of which many are an abnormal test result that was lost to follow-up, that is, missed results. These system problems that contribute to missed results may represent low-hanging fruit for those who wish to reduce diagnostic errors in their institution. The rate of missed results and associated treatment delay are discussed. The system factors and human factors that contribute to these errors are discussed along with strategies that can be adopted to reduce these errors. PMID:17873665

  1. Proposed interventions to decrease the frequency of missed test results.

    PubMed

    Wahls, Terry L; Cram, Peter

    2009-09-01

    Numerous studies have identified that delays in diagnosis related to the mishandling of abnormal test results are an import contributor to diagnostic errors. Factors contributing to missed results included organizational factors, provider factors and patient-related factors. At the diagnosis error conference continuing medical education conference in 2008, attendees attended two focus groups dedicated to identification of strategies to lower the frequency of missed results. The recommendations were reviewed and summarized. Improved standardization of the steps involved in the flow of test result information, greater involvement of patients to insure the follow up of test results, and systems re-engineering to improve the management and presentation of data. Focusing the initial interventions on the specific tests which have been identified as high risk for adverse impact on patient outcomes such as tests associated with a possible malignancy or acute coronary syndrome will likely have the most significant impact on clinical outcome and patient satisfaction with care. PMID:19669920

  2. Genetic Deletion of Cadm4 Results in Myelin Abnormalities Resembling Charcot-Marie-Tooth Neuropathy

    PubMed Central

    Golan, Neev; Kartvelishvily, Elena; Spiegel, Ivo; Salomon, Daniela; Sabanay, Helena; Rechav, Katya; Vainshtein, Anya; Frechter, Shahar; Maik-Rachline, Galia; Eshed-Eisenbach, Yael; Momoi, Takashi

    2013-01-01

    The interaction between myelinating Schwann cells and the axons they ensheath is mediated by cell adhesion molecules of the Cadm/Necl/SynCAM family. This family consists of four members: Cadm4/Necl4 and Cadm1/Necl2 are found in both glia and axons, whereas Cadm2/Necl3 and Cadm3/Necl1 are expressed by sensory and motor neurons. By generating mice lacking each of the Cadm genes, we now demonstrate that Cadm4 plays a role in the establishment of the myelin unit in the peripheral nervous system. Mice lacking Cadm4 (PGK-Cre/Cadm4fl/fl), but not Cadm1, Cadm2, or Cadm3, develop focal hypermyelination characterized by tomacula and myelin outfoldings, which are the hallmark of several Charcot-Marie-Tooth neuropathies. The absence of Cadm4 also resulted in abnormal axon–glial contact and redistribution of ion channels along the axon. These neuropathological features were also found in transgenic mice expressing a dominant-negative mutant of Cadm4 lacking its cytoplasmic domain in myelinating glia Tg(mbp-Cadm4dCT), as well as in mice lacking Cadm4 specifically in Schwann cells (DHH-Cre/Cadm4fl/fl). Consistent with these abnormalities, both PGK-Cre/Cadm4fl/fl and Tg(mbp-Cadm4dCT) mice exhibit impaired motor function and slower nerve conduction velocity. These findings indicate that Cadm4 regulates the growth of the myelin unit and the organization of the underlying axonal membrane. PMID:23825401

  3. Limited Clinical Utility of Non-invasive Prenatal Testing for Subchromosomal Abnormalities.

    PubMed

    Lo, Kitty K; Karampetsou, Evangelia; Boustred, Christopher; McKay, Fiona; Mason, Sarah; Hill, Melissa; Plagnol, Vincent; Chitty, Lyn S

    2016-01-01

    The use of massively parallel sequencing of maternal cfDNA for non-invasive prenatal testing (NIPT) of aneuploidy is widely available. Recently, the scope of testing has increased to include selected subchromosomal abnormalities, but the number of samples reported has been small. We developed a calling pipeline based on a segmentation algorithm for the detection of these rearrangements in maternal plasma. The same read depth used in our standard pipeline for aneuploidy NIPT detected 15/18 (83%) samples with pathogenic rearrangements > 6 Mb but only 2/10 samples with rearrangements < 6 Mb, unless they were maternally inherited. There were two false-positive calls in 534 samples with no known subchromosomal abnormalities (specificity 99.6%). Using higher read depths, we detected 29/31 fetal subchromosomal abnormalities, including the three samples with maternally inherited microduplications. We conclude that test sensitivity is a function of the fetal fraction, read depth, and size of the fetal CNV and that at least one of the two false negatives is due to a low fetal fraction. The lack of an independent method for determining fetal fraction, especially for female fetuses, leads to uncertainty in test sensitivity, which currently has implications for this technique's future as a clinical diagnostic test. Furthermore, to be effective, NIPT must be able to detect chromosomal rearrangements across the whole genome for a very low false-positive rate. Because standard NIPT can only detect the majority of larger (>6 Mb) chromosomal rearrangements and requires knowledge of fetal fraction, we consider that it is not yet ready for routine clinical implementation. PMID:26708752

  4. Progranulin haploinsufficiency causes biphasic social dominance abnormalities in the tube test.

    PubMed

    Arrant, A E; Filiano, A J; Warmus, B A; Hall, A M; Roberson, E D

    2016-07-01

    Loss-of-function mutations in progranulin (GRN) are a major autosomal dominant cause of frontotemporal dementia (FTD), a neurodegenerative disorder in which social behavior is disrupted. Progranulin-insufficient mice, both Grn(+/-) and Grn(-/-) , are used as models of FTD due to GRN mutations, with Grn(+/-) mice mimicking the progranulin haploinsufficiency of FTD patients with GRN mutations. Grn(+/-) mice have increased social dominance in the tube test at 6 months of age, although this phenotype has not been reported in Grn(-/-) mice. In this study, we investigated how the tube test phenotype of progranulin-insufficient mice changes with age, determined its robustness under several testing conditions, and explored the associated cellular mechanisms. We observed biphasic social dominance abnormalities in Grn(+/-) mice: at 6-8 months, Grn(+/-) mice were more dominant than wild-type littermates, while after 9 months of age, Grn(+/-) mice were less dominant. In contrast, Grn(-/-) mice did not exhibit abnormal social dominance, suggesting that progranulin haploinsufficiency has distinct effects from complete progranulin deficiency. The biphasic tube test phenotype of Grn(+/-) mice was associated with abnormal cellular signaling and neuronal morphology in the amygdala and prefrontal cortex. At 6-9 months, Grn(+/-) mice exhibited increased mTORC2/Akt signaling in the amygdala and enhanced dendritic arbors in the basomedial amygdala, and at 9-16 months Grn(+/-) mice exhibited diminished basal dendritic arbors in the prelimbic cortex. These data show a progressive change in tube test dominance in Grn(+/-) mice and highlight potential underlying mechanisms by which progranulin insufficiency may disrupt social behavior. PMID:27213486

  5. Progranulin haploinsufficiency causes biphasic social dominance abnormalities in the tube test.

    PubMed

    Arrant, A E; Filiano, A J; Warmus, B A; Hall, A M; Roberson, E D

    2016-07-01

    Loss-of-function mutations in progranulin (GRN) are a major autosomal dominant cause of frontotemporal dementia (FTD), a neurodegenerative disorder in which social behavior is disrupted. Progranulin-insufficient mice, both Grn(+/-) and Grn(-/-) , are used as models of FTD due to GRN mutations, with Grn(+/-) mice mimicking the progranulin haploinsufficiency of FTD patients with GRN mutations. Grn(+/-) mice have increased social dominance in the tube test at 6 months of age, although this phenotype has not been reported in Grn(-/-) mice. In this study, we investigated how the tube test phenotype of progranulin-insufficient mice changes with age, determined its robustness under several testing conditions, and explored the associated cellular mechanisms. We observed biphasic social dominance abnormalities in Grn(+/-) mice: at 6-8 months, Grn(+/-) mice were more dominant than wild-type littermates, while after 9 months of age, Grn(+/-) mice were less dominant. In contrast, Grn(-/-) mice did not exhibit abnormal social dominance, suggesting that progranulin haploinsufficiency has distinct effects from complete progranulin deficiency. The biphasic tube test phenotype of Grn(+/-) mice was associated with abnormal cellular signaling and neuronal morphology in the amygdala and prefrontal cortex. At 6-9 months, Grn(+/-) mice exhibited increased mTORC2/Akt signaling in the amygdala and enhanced dendritic arbors in the basomedial amygdala, and at 9-16 months Grn(+/-) mice exhibited diminished basal dendritic arbors in the prelimbic cortex. These data show a progressive change in tube test dominance in Grn(+/-) mice and highlight potential underlying mechanisms by which progranulin insufficiency may disrupt social behavior.

  6. Limited Clinical Utility of Non-invasive Prenatal Testing for Subchromosomal Abnormalities

    PubMed Central

    Lo, Kitty K.; Karampetsou, Evangelia; Boustred, Christopher; McKay, Fiona; Mason, Sarah; Hill, Melissa; Plagnol, Vincent; Chitty, Lyn S.

    2016-01-01

    The use of massively parallel sequencing of maternal cfDNA for non-invasive prenatal testing (NIPT) of aneuploidy is widely available. Recently, the scope of testing has increased to include selected subchromosomal abnormalities, but the number of samples reported has been small. We developed a calling pipeline based on a segmentation algorithm for the detection of these rearrangements in maternal plasma. The same read depth used in our standard pipeline for aneuploidy NIPT detected 15/18 (83%) samples with pathogenic rearrangements > 6 Mb but only 2/10 samples with rearrangements < 6 Mb, unless they were maternally inherited. There were two false-positive calls in 534 samples with no known subchromosomal abnormalities (specificity 99.6%). Using higher read depths, we detected 29/31 fetal subchromosomal abnormalities, including the three samples with maternally inherited microduplications. We conclude that test sensitivity is a function of the fetal fraction, read depth, and size of the fetal CNV and that at least one of the two false negatives is due to a low fetal fraction. The lack of an independent method for determining fetal fraction, especially for female fetuses, leads to uncertainty in test sensitivity, which currently has implications for this technique’s future as a clinical diagnostic test. Furthermore, to be effective, NIPT must be able to detect chromosomal rearrangements across the whole genome for a very low false-positive rate. Because standard NIPT can only detect the majority of larger (>6 Mb) chromosomal rearrangements and requires knowledge of fetal fraction, we consider that it is not yet ready for routine clinical implementation. PMID:26708752

  7. Risk assessment models in genetics clinic for array comparative genomic hybridization: Clinical information can be used to predict the likelihood of an abnormal result in patients

    PubMed Central

    Marano, Rachel M.; Mercurio, Laura; Kanter, Rebecca; Doyle, Richard; Abuelo, Dianne; Morrow, Eric M.; Shur, Natasha

    2013-01-01

    Array comparative genomic hybridization (aCGH) testing can diagnose chromosomal microdeletions and duplications too small to be detected by conventional cytogenetic techniques. We need to consider which patients are more likely to receive a diagnosis from aCGH testing versus patients that have lower likelihood and may benefit from broader genome wide scanning. We retrospectively reviewed charts of a population of 200 patients, 117 boys and 83 girls, who underwent aCGH testing in Genetics Clinic at Rhode Island hospital between 1 January/2008 and 31 December 2010. Data collected included sex, age at initial clinical presentation, aCGH result, history of seizures, autism, dysmorphic features, global developmental delay/intellectual disability, hypotonia and failure to thrive. aCGH analysis revealed abnormal results in 34 (17%) and variants of unknown significance in 24 (12%). Patients with three or more clinical diagnoses had a 25.0% incidence of abnormal aCGH findings, while patients with two or fewer clinical diagnoses had a 12.5% incidence of abnormal aCGH findings. Currently, we provide families with a range of 10–30% of a diagnosis with aCGH testing. With increased clinical complexity, patients have an increased probability of having an abnormal aCGH result. With this, we can provide individualized risk estimates for each patient. PMID:27625836

  8. Risk assessment models in genetics clinic for array comparative genomic hybridization: Clinical information can be used to predict the likelihood of an abnormal result in patients.

    PubMed

    Marano, Rachel M; Mercurio, Laura; Kanter, Rebecca; Doyle, Richard; Abuelo, Dianne; Morrow, Eric M; Shur, Natasha

    2013-03-01

    Array comparative genomic hybridization (aCGH) testing can diagnose chromosomal microdeletions and duplications too small to be detected by conventional cytogenetic techniques. We need to consider which patients are more likely to receive a diagnosis from aCGH testing versus patients that have lower likelihood and may benefit from broader genome wide scanning. We retrospectively reviewed charts of a population of 200 patients, 117 boys and 83 girls, who underwent aCGH testing in Genetics Clinic at Rhode Island hospital between 1 January/2008 and 31 December 2010. Data collected included sex, age at initial clinical presentation, aCGH result, history of seizures, autism, dysmorphic features, global developmental delay/intellectual disability, hypotonia and failure to thrive. aCGH analysis revealed abnormal results in 34 (17%) and variants of unknown significance in 24 (12%). Patients with three or more clinical diagnoses had a 25.0% incidence of abnormal aCGH findings, while patients with two or fewer clinical diagnoses had a 12.5% incidence of abnormal aCGH findings. Currently, we provide families with a range of 10-30% of a diagnosis with aCGH testing. With increased clinical complexity, patients have an increased probability of having an abnormal aCGH result. With this, we can provide individualized risk estimates for each patient.

  9. Risk assessment models in genetics clinic for array comparative genomic hybridization: Clinical information can be used to predict the likelihood of an abnormal result in patients.

    PubMed

    Marano, Rachel M; Mercurio, Laura; Kanter, Rebecca; Doyle, Richard; Abuelo, Dianne; Morrow, Eric M; Shur, Natasha

    2013-03-01

    Array comparative genomic hybridization (aCGH) testing can diagnose chromosomal microdeletions and duplications too small to be detected by conventional cytogenetic techniques. We need to consider which patients are more likely to receive a diagnosis from aCGH testing versus patients that have lower likelihood and may benefit from broader genome wide scanning. We retrospectively reviewed charts of a population of 200 patients, 117 boys and 83 girls, who underwent aCGH testing in Genetics Clinic at Rhode Island hospital between 1 January/2008 and 31 December 2010. Data collected included sex, age at initial clinical presentation, aCGH result, history of seizures, autism, dysmorphic features, global developmental delay/intellectual disability, hypotonia and failure to thrive. aCGH analysis revealed abnormal results in 34 (17%) and variants of unknown significance in 24 (12%). Patients with three or more clinical diagnoses had a 25.0% incidence of abnormal aCGH findings, while patients with two or fewer clinical diagnoses had a 12.5% incidence of abnormal aCGH findings. Currently, we provide families with a range of 10-30% of a diagnosis with aCGH testing. With increased clinical complexity, patients have an increased probability of having an abnormal aCGH result. With this, we can provide individualized risk estimates for each patient. PMID:27625836

  10. Risk assessment models in genetics clinic for array comparative genomic hybridization: Clinical information can be used to predict the likelihood of an abnormal result in patients

    PubMed Central

    Marano, Rachel M.; Mercurio, Laura; Kanter, Rebecca; Doyle, Richard; Abuelo, Dianne; Morrow, Eric M.; Shur, Natasha

    2013-01-01

    Array comparative genomic hybridization (aCGH) testing can diagnose chromosomal microdeletions and duplications too small to be detected by conventional cytogenetic techniques. We need to consider which patients are more likely to receive a diagnosis from aCGH testing versus patients that have lower likelihood and may benefit from broader genome wide scanning. We retrospectively reviewed charts of a population of 200 patients, 117 boys and 83 girls, who underwent aCGH testing in Genetics Clinic at Rhode Island hospital between 1 January/2008 and 31 December 2010. Data collected included sex, age at initial clinical presentation, aCGH result, history of seizures, autism, dysmorphic features, global developmental delay/intellectual disability, hypotonia and failure to thrive. aCGH analysis revealed abnormal results in 34 (17%) and variants of unknown significance in 24 (12%). Patients with three or more clinical diagnoses had a 25.0% incidence of abnormal aCGH findings, while patients with two or fewer clinical diagnoses had a 12.5% incidence of abnormal aCGH findings. Currently, we provide families with a range of 10–30% of a diagnosis with aCGH testing. With increased clinical complexity, patients have an increased probability of having an abnormal aCGH result. With this, we can provide individualized risk estimates for each patient.

  11. Associations between sexually transmitted infections, high-risk human papillomavirus infection, and abnormal cervical Pap smear results in OB/GYN outpatients

    PubMed Central

    Kim, Tae Jin

    2016-01-01

    Objective This study aimed to examine the meaning and usefulness of sexually transmitted infection (STI) test when caring for patients who have abnormal cervical cytology and/or positive high-risk human papillomavirus (HPV) DNA test results. Methods Among patients who underwent liquid-based cervical cytology and HPV DNA tests at the Obstetrics and Gynecology outpatient clinic, 800 patients who showed abnormal cervical cytology were compared with 200 patients in the control group. Both groups were simultaneously tested via multiplex real-time polymerase chain reaction for seven types of STI-causative microorganisms. Results The positive rate of high-risk HPV infection in total STIs positive group was 1.47 times higher than that of total STIs negative group. The probability of a cytological diagnosis of a grade equal to or higher than atypical squamous cells-cannot exclude high grade squamous intraepithelial lesion (ASC-H) was significantly higher in patients testing positive for total STIs (1.46 times), Chlamydia trachomatis (3.21 times), or Mycoplasma genitalicum (3.58 times) than in those testing negative. The total STIs positive rate was significantly higher for those having a cytological diagnosis of a grade equal to or higher than atypical squamous cells of undetermined significance (ASC-US) when high-risk HPV test result was negative. Conclusion Correlations were present not only between STIs and high-risk HPV infection but also between abnormal cervical cytology and STIs. Therefore, additional evaluation of STIs will be helpful to appropriately diagnose and treat patients with abnormal cervical cytology, positive results on high-risk HPV DNA test, or a cytological diagnosis of ASC-US despite negative high-risk HPV DNA test result. PMID:27329197

  12. [Tilt test and orthostatic intolerance: abnormalities in the neural sympathetic response to gravitational stimulus].

    PubMed

    Furlan, R

    2001-05-01

    In the present manuscript the different methodologies aimed at assessing the autonomic profile in humans during a gravitational stimulus have been described. In addition, strengths and drawbacks of the tilt test in relation to occasional orthostatic intolerance were addressed. Finally, different autonomic abnormalities underlying occasional and chronic orthostatic intolerance syndromes have been schematically highlighted. The direct recording of the neural sympathetic discharge from the peroneal nerve (MSNA), in spite of its invasive nature, still represents the recognized reference to quantify the changes in the sympathetic activity to the vessels attending postural modifications. The increase of plasma norepinephrine during a tilt test is achieved by both an increase in plasma spillover and a concomitant decrease in systemic clearance. Changes in the indices of cardiac sympathetic and vagal modulation may also be quantified during a tilt test by power spectrum analysis of RR interval variability. The spectral markers of cardiac autonomic control, if evaluated concomitantly with MSNA, may contribute to assess abnormalities in the regional distribution of the sympathetic activity to the heart and the vessels. The capability of the tilt test of reproducing a vasovagal event or of inducing "false positive responses" seems to be markedly affected by the age, thus suggesting that additional or different etiopathogenetic mechanisms might be involved in the loss of consciousness in older as compared to younger subjects. In subjects suffering from occasional or habitual neurally mediated syncope an increase or, respectively, a decrease in cardiac and vascular sympathetic modulation has been documented before the loss of consciousness. In patients with pure autonomic failure, a global dysautonomia affecting both the sympathetic and the vagal modulation to the heart, seems to be present. In chronic orthostatic intolerance, the most common form of dysautonomia of young women

  13. 40 CFR 799.12 - Test results.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 32 2011-07-01 2011-07-01 false Test results. 799.12 Section 799.12...) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.12 Test results. Except as set forth in specific chemical test rules in subpart B of this part, a positive...

  14. 40 CFR 799.12 - Test results.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 32 2014-07-01 2014-07-01 false Test results. 799.12 Section 799.12...) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.12 Test results. Except as set forth in specific chemical test rules in subpart B of this part, a positive...

  15. Abnormal test growth in benthic foraminifera from hypersaline coastal ponds of the United Arab Emirates

    NASA Astrophysics Data System (ADS)

    Fiorini, Flavia; Lokier, Stephen W.

    2014-05-01

    The living (Rose-Bengal stained) benthic foraminifera assemblage from shallow coastal ponds located in the intertidal area of the United Arab Emirate Western Region was investigated. The studied coastal ponds are located between a lagoonal area, characterized by carbonate sedimentation, and the supratidal, evaporite-dominated, sabkha. Sampling was undertaken when the maximum water depth in the ponds was 50 cm with a water temperature ranging from 27 to 35°C, a pH of 8 and a maximum salinity of 60 ppt. The sides and floor of the pond were characterized by a microbial mat. Detached blades of sea grass were present in the ponds and are inferred to have been transported into the pond either during high-tides or storm surges. Collected samples were stained with Rose-Bengal at the moment of sample collection and the living assemblage was studied. The benthic foraminifera that were present show a low-diversity assemblage. Epiphytic larger benthic foraminifera dominate the living assemblage with Peneroplis pertusus and P. planatus characterizing 90% of the living assemblage and the species Spirolina areatina, S. aciculata, Sorites marginalis and Quinqueloculina spp. comprising the rest of the foraminifera community. High percentages (up to 50% of the stained assemblage) of anomalous tests of benthic foraminifera belonging to the genera Peneroplis, Spirolina and Sorites were observed. The anomalies included dissolution, microboring and abnormality in growth. Three different forms of abnormal shell architecture were recorded; the presence of multiple apertures with reduced size, deformation in the general shape of the test and abnormal coiling. The high percentage of abnormal tests reflects natural environmental stress caused by instability of physical parameters (particularly high and variable salinity and temperature) in this kind of transitional marine environment. The unique presence of epiphytic species, suggests that epiphytic foraminifera may be transported into the

  16. Liver Function Test Abnormalities in Depressed Patients Treated with Antidepressants: A Real-World Systematic Observational Study in Psychiatric Settings

    PubMed Central

    Verstuyft, Céline; Corruble, Emmanuelle; Perlemuter, Gabriel; Colle, Romain

    2016-01-01

    Background Concerning the risk of antidepressant induced liver injury, it is not clear whether psychiatrists perform a liver function test (LFT) and whether an increase in aminotransferase levels should contraindicate antidepressant treatment. Aim To evaluate LFT availability, the prevalence of LFT abnormalities and the probable cause of an altered LFT in patients with a major depressive episode (MDE) requiring an antidepressant drug. Methods We studied LFT evaluation in a real world psychiatric setting, in a sample of 321 consecutive patients with a current major depressive episode (MDE) requiring an antidepressant drug treatment, but without current alcohol or drug dependence or unstable medical disease. Results An LFT is performed in 36.1% (116/321) of depressed patients. One fifth of antidepressant-treated patients who had an LFT evaluation had abnormal results. The most frequent causes of LFT abnormalities were: NAFLD (nonalcoholic fatty liver disease) (7/321; 2.1%), acute alcohol consumption (4/321; 1.2%), antidepressant-induced liver injury (3/321; 0.9%), hepatitis C virus infection (2/321; 0.6%) and heart failure (1/321; 0.3%). The cause of LFT abnormalities was unknown in 32% of patients (8/25) due to the absence of etiological investigations. Conclusion These results demonstrate that an LFT is infrequently performed by psychiatrists in depressed patients requiring an antidepressant drug. Baseline LFT assessment and observations during the first six months of antidepressant treatment may be useful for detection of patients with pre-existing liver disease such as NAFLD, and early identification of cases of antidepressant-induced liver injury. An increase in aminotransferase levels may be related to an underlying liver disease, but does not contraindicate antidepressant treatment. PMID:27171561

  17. Test 6, Test 7, and Gas Standard Analysis Results

    NASA Technical Reports Server (NTRS)

    Perez, Horacio, III

    2007-01-01

    This viewgraph presentation shows results of analyses on odor, toxic off gassing and gas standards. The topics include: 1) Statistical Analysis Definitions; 2) Odor Analysis Results NASA Standard 6001 Test 6; 3) Toxic Off gassing Analysis Results NASA Standard 6001 Test 7; and 4) Gas Standard Results NASA Standard 6001 Test 7;

  18. Expression of an Arabidopsis plasma membrane aquaporin in Dictyostelium results in hypoosmotic sensitivity and developmental abnormalities.

    PubMed

    Chaumont, F; Loomis, W F; Chrispeels, M J

    1997-06-10

    The rd28 gene of Arabidopsis thaliana encodes a water channel protein, or aquaporin, of the plasma membrane. A construct in which transcription of the rd28 cDNA is controlled by the Dictyostelium actin15 promoter was transformed into Dictyostelium discoideum cells. Transformants contained RD28 protein in their plasma membranes. When shifted to a low-osmotic-strength buffer, cells expressing rd28 swelled rapidly and burst, indicating that the plant aquaporin allowed rapid water entry in the amoebae. The rate of osmotic lysis was a function of the osmotic pressure of the buffer. We also selected transformants in which the expression of the rd28 cDNA is driven by the promoter of the prespore cotB gene. These transformants accumulated rd28 mRNA uniquely in prespore cells. In low-osmotic-strength buffer, the cotB::rd28 cells aggregated and formed normally proportioned slugs but failed to form normal fruiting bodies. The number of spores was reduced 20-fold, and the stalks of the fruiting bodies were abnormally short. The consequences of expressing RD28 in prespore cells could be partially overcome by increasing the osmolarity of the medium. Under these conditions, the cotB::rd28 cells formed fruiting bodies of more normal appearance, and the number of viable spores increased slightly. Because prespore cells have to shrink and dehydrate to form spores, it was not unexpected that expression of an aquaporin would disrupt this process, but it was surprising to find that stalk differentiation was also affected by expression of rd28 in prespore cells. It appears that osmotic stress on prespore cells alters their ability to signal terminal differentiation in prestalk cells. The results provide independent confirmation that plant aquaporins can function in the cells of other organisms, and that D. discoideum can be used to study the properties of these water channels.

  19. Endovascular treatment of symptomatic vestibular aqueduct dehiscence as a result of jugular bulb abnormalities.

    PubMed

    Thénint, Marie-Aude; Barbier, Charlotte; Hitier, Martin; Patron, Vincent; Saleme, Suzana; Courthéoux, Patrick

    2014-11-01

    A new endovascular treatment consisting of stent-assisted coil implantation is described for jugular bulb abnormalities causing symptomatic vestibular aqueduct dehiscence. Three patients presenting with vertigo associated with pulsatile tinnitus or hearing loss were treated. This technique cured the vertigo and pulsatile tinnitus in all patients and preserved normal cerebral venous drainage with no side effects.

  20. Harmonization of Clinical Laboratory Test Results.

    PubMed

    2016-02-01

    Clinical laboratory testing is now a global activity with laboratories no longer working in isolation but as regional and national networks, and often at international levels. We now have all of the electronic gadgetry via internet technology at our fingertips to rapidly and accurately measure and report on laboratory testing but are our test results harmonized? PMID:27683501

  1. Harmonization of Clinical Laboratory Test Results

    PubMed Central

    2016-01-01

    EDITORIAL Clinical laboratory testing is now a global activity with laboratories no longer working in isolation but as regional and national networks, and often at international levels. We now have all of the electronic gadgetry via internet technology at our fingertips to rapidly and accurately measure and report on laboratory testing but are our test results harmonized? PMID:27683501

  2. Cancer, reproductive abnormalities, and diabetes in Micronesia: the effect of nuclear testing.

    PubMed

    Yamada, Seiji

    2004-09-01

    Many suggest that cancer and other diseases in Micronesia have been caused by nuclear testing in the Pacific. The 50-year commemoration of the March 1, 1954 Bravo thermonuclear test has rekindled interest in this area. This paper explores the documentation for, and the plausibility of, claims for disease causation by nuclear testing. Given the sheer volume of testing that the US conducted in the Pacific, it appears plausible that excess cancer would have occurred in areas of Micronesia other than the Marshall Islands. An excess of birth abnormalities in the Marshall Islands has been documented. While diabetes is not a radiogenic disease, and other cancers are generally less radiogenic than leukemia or thyroid cancer, the social and cultural effects of nuclear testing specifically, and the strategic uses to which Micronesia has been put generally, have had roles in the social production of disease. Integration into a globalized, cosmopolitan economy-with attendant phenomena such as the importation of tobacco, alcohol, foods of poor nutritional value, and new cultural morés-are also factors. PMID:16281703

  3. Egestion of asbestos fibers in Tetrahymena results in early morphological abnormalities. A step in the induction of heterogeneous cell lines?

    PubMed

    Hjelm, K K

    1989-01-01

    In Tetrahymena populations exposed to crocidolite asbestos fibers, many cells develop morphological abnormalities within 1-2 hours. The abnormalities are mainly large or small protrusions or indentations, or flattened parts of the cell surface and most often located in the posterior part of the cell. They are formed repeatedly in all cells but are also continuously repaired so that the fraction of cells affected represents an equilibrium between these two processes. Their formation is connected with egestion of the large bundles of fibers formed by phagocytosis. Such effects of egestion of fibers do not seem to have been reported previously. Egestion of a bundle of fibers is much slower than for other types of undigestible residues. In contrast to normal exocytosis occurring invariably at the cytoproct, egestion of asbestos often occurs in the posterior part of the cell outside the cytoproct. To my knowledge this is the first reported case of either very slow or extra-cytoproctal egestion in Tetrahymena. Cells with large abnormalities have a greater tendency to develop into "early heterogeneous" cells than the average abnormal cell. Some of these give rise to hereditarily stable heterogeneous cell lines of Tetrahymena. The morphological abnormalities are probably caused by mechanical action of the crocidolite fibers resulting in local damage of the cytoskeletal elements responsible for normal cell shape. The heterogenous cell lines may arise when cellular structures carrying non-genic cytotactically inherited information are modified. The relevance of these ideas to the induction of cancer by asbestos is briefly discussed.

  4. Reproducibility of liquid oxygen impact test results

    NASA Technical Reports Server (NTRS)

    Gayle, J. B.

    1975-01-01

    Results for 12,000 impacts on a wide range of materials were studied to determine the reproducibility of the liquid oxygen impact test method. Standard deviations representing the overall variability of results were in close agreement with the expected values for a binomial process. This indicates that the major source of variability is due to the go - no go nature of the test method and that variations due to sampling and testing operations were not significant.

  5. Prognostic impact of coronary microcirculation abnormalities in systemic sclerosis: a prospective study to evaluate the role of non-invasive tests

    PubMed Central

    2013-01-01

    Introduction Microcirculation dysfunction is a typical feature of systemic sclerosis (SSc) and represents the earliest abnormality of primary myocardial involvement. We assessed coronary microcirculation status by combining two functional tests in SSc patients and estimating its impact on disease outcome. Methods Forty-one SSc patients, asymptomatic for coronary artery disease, were tested for coronary flow velocity reserve (CFR) by transthoracic-echo-Doppler with adenosine infusion (A-TTE) and for left ventricular wall motion abnormalities (WMA) by dobutamine stress echocardiography (DSE). Myocardial multi-detector computed tomography (MDCT) enabled the presence of epicardial stenosis, which could interfere with the accuracy of the tests, to be excluded. Patient survival rate was assessed over a 6.7- ± 3.5-year follow-up. Results Nineteen out of 41 (46%) SSc patients had a reduced CFR (≤2.5) and in 16/41 (39%) a WMA was observed during DSE. Furthermore, 13/41 (32%) patients showed pathological CFR and WMA. An inverse correlation between wall motion score index (WMSI) during DSE and CFR value (r = -0.57, P <0.0001) was observed; in addition, CFR was significantly reduced (2.21 ± 0.38) in patients with WMA as compared to those without (2.94 ± 0.60) (P <0.0001). In 12 patients with abnormal DSE, MDCT was used to exclude macrovasculopathy. During a 6.7- ± 3.5-year follow-up seven patients with abnormal coronary functional tests died of disease-related causes, compared to only one patient with normal tests. Conclusions A-TTE and DSE tests are useful tools to detect non-invasively pre-clinical microcirculation abnormalities in SSc patients; moreover, abnormal CFR and WMA might be related to a worse disease outcome suggesting a prognostic value of these tests, similar to other myocardial diseases. PMID:23302110

  6. 40 CFR 799.12 - Test results.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Test results. 799.12 Section 799.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED... results. Except as set forth in specific chemical test rules in subpart B of this part, a positive...

  7. The 2008 M7.9 Wenchuan earthquake - Result of Local and Abnormal Mass Imbalances?

    NASA Astrophysics Data System (ADS)

    Klose, C. D.

    2008-12-01

    The May 12, 2008 M7.9 Wenchuan earthquake occurred along the Longmen Shan margin of the eastern Tibetan plateau in the Sichuan province of the People's Republic of China. A complex and NNW dipping reverse fault system including the Beichuan fault ruptured 250-300 km parallel to the Longmen Shan thrust belt. This region has been tectonically loaded for >10kyr. It has low deformation rates of less than 1.0±1.0 mm yr-1 resulting in no major seismic activity during the Quaternary period. Several geophysical observations suggest that this M7.9 earthquake was triggered by local and abnormal mass imbalances on the surface of the Earth's crust. These observations include (1) elastostatic response of the crust to the mass changes (2) slip distribution of the main rupture, and (3) aftershock distribution. Initially, approximately 2 years prior the nucleation of the mainshock, at least 320 million tonnes of water accumulated within the upper Min river valley. It enters the Chengdu plain of the Sichuan basin, a stable continental region (SCR). The water volume amplified the strain energy on the Earth's crust. Shear stresses increased by >1kPa on the Beichuan fault at the nucleation point in about 20km depth. Normal stresses decreased by <-4kPa and weakened the fault strength. Pore pressure increases might have additionally destabilized the fault locally due to pore pressure diffusion. This effect, however, might be minor in 20km depth, because of low lateral fracture connectivity and permeability between the area of water accumulation and the Beichuan fault. Overall, the stress alterations within a 120±70km2 large area resulted in the Beichuan fault coming closer to failure. Such an area ruptured would account for a M7.2±0.1 earthquake assuming only 10 MPa stress drop. Secondly, a reverse fault focal mechanism dominated, in particular, during the first 50 seconds of the main M7.9 rupture. The Beichuan fault slipped up to 7m upward peaking at shallow depth (<7km) (Nishimura

  8. Possibility to predict early postpartum glucose abnormality following gestational diabetes mellitus based on the results of routine mid-gestational screening

    PubMed Central

    Bartáková, Vendula; Malúšková, Denisa; Mužík, Jan; Bělobrádková, Jana; Kaňková, Kateřina

    2015-01-01

    Introduction Women with previous gestational diabetes mellitus (GDM) have increased risk of developing glucose abnormality, but current diagnostic criteria are evidence-based for adverse pregnancy outcome. The aims of our study were: (i) to ascertain a frequency of early conversion of GDM into permanent glucose abnormality, (ii) to determine predictive potential of current GDM diagnostic criteria for prediction of postpartum glucose abnormality and (iii) to find optimal cut-off values of oral glucose tolerance test (oGTT) to stratify GDM population according to postpartum risk. Materials and methods Electronic medical records of an ethnically homogenous cohort of women diagnosed and treated for GDM in a single medical centre during the period 2005–2011 who completed postpartum oGTT up to 1 year after the index delivery were retrospectively analysed (N = 305). Results Postpartum glucose abnormality was detected in 16.7% subjects. Mid-trimester oGTT values, respective area under the curve and HbA1c were significantly associated with early postpartum glucose abnormality (P < 0.05, Mann-Whitney) and exhibited significant predictive potential for postpartum glucose abnormality risk assessment. Optimal cut-off values for discrimination of at-risk sub-population were identified using ROC analysis and their comparison with WHO and IADPSG criteria exhibited superiority of IADPSG for risk-stratification of GDM population. Conclusion Risk-based stratification at the time of GDM diagnosis could improve efficiency of the post-gestational screening for diabetes. IADPSG criteria seem to optimally capture both perinatal and maternal metabolic risks and are therefore medically and economically justified. PMID:26526166

  9. Alternative filtration testing program: Pre-evaluation of test results

    SciTech Connect

    Georgeton, G.K.; Poirier, M.R.

    1990-09-28

    Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

  10. BWR Full Integral Simulation Test (FIST). Phase I test results

    SciTech Connect

    Hwang, W S; Alamgir, M; Sutherland, W A

    1984-09-01

    A new full height BWR system simulator has been built under the Full-Integral-Simulation-Test (FIST) program to investigate the system responses to various transients. The test program consists of two test phases. This report provides a summary, discussions, highlights and conclusions of the FIST Phase I tests. Eight matrix tests were conducted in the FIST Phase I. These tests have investigated the large break, small break and steamline break LOCA's, as well as natural circulation and power transients. Results and governing phenomena of each test have been evaluated and discussed in detail in this report. One of the FIST program objectives is to assess the TRAC code by comparisons with test data. Two pretest predictions made with TRACB02 are presented and compared with test data in this report.

  11. Stress testing predischarge and six weeks after myocardial infarction to compare submaximal and maximal exercise predischarge and to assess the reproducibility of induced abnormalities.

    PubMed

    Handler, C E; Sowton, E

    1985-10-01

    Submaximal and maximal treadmill exercise tests were performed predischarge in 64 patients after acute myocardial infarction to assess the relative yield of residual ischaemic abnormalities. The reproducibility of individual abnormalities resulting from maximal stress tests performed predischarge and 6 weeks after infarction was also assessed in 55 of these patients. Compared with predischarge submaximal exercise testing, a maximal exercise test identified a significantly greater number of patients with residual myocardial ischaemia (26 vs. 15, P less than 0.05) and this was associated with a significantly longer average maximal exercise duration (P less than 0.001), and a higher rate-pressure product (P less than 0.001). Among the 55 patients who had maximal stress tests both predischarge and 6 weeks after infarction, there was a significant lack of reproducibility in the occurrence of exercise induced angina (P less than 0.01) and an abnormal blood pressure response (P less than 0.02). In contrast, exercise induced ST segment depression and elevation and ventricular arrhythmias were relatively reproducible. More patients had an ischaemic test result (ST depression or angina) at the later test compared to the predischarge test (33 vs. 25 patients) but this increase was not statistically significant. There were, however, significant increases at the later test in mean maximal exercise duration (P less than 0.001). mean maximal heart rate (P less than 0.001) and heart rate-systolic blood pressure double product (P less than 0.001). The majority of patients who had a cardiac event in the period between the two tests had a predischarge test abnormality. We conclude that a significantly greater number of patients with residual reversible myocardial ischaemia after infarction will be identified by symptom limited exercise testing compared with a submaximal predischarge test. Because ST depression and elevation appear reproducible, patients who develop these

  12. Test Results Untrustworthy. Point of View Essay

    ERIC Educational Resources Information Center

    Berliner, David C.; Nichols, Sharon L.

    2005-01-01

    America's public schools are making harmful, irreversible decisions based on test results that--in an increasing number of cases--can't be trusted, Arizona State University's Education Policy Research Laboratory has found. The pressure of high-stakes tests is forcing school districts and state Departments of Education to take inappropriate and at…

  13. Using Test Results to Improve Instruction.

    ERIC Educational Resources Information Center

    Bassler, Otto C.; Caulkins, Thomas G.

    A model for summarizing test scores and using them to modify instructional programs is presented. The proposed model consists of two types of summaries of the data gathered through standardized tests. The first summary contains individual and single class results. Information in a "Class Item Response Record" chart provides individual student…

  14. 40 CFR 799.12 - Test results.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 33 2012-07-01 2012-07-01 false Test results. 799.12 Section 799.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.12...

  15. 40 CFR 799.12 - Test results.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Test results. 799.12 Section 799.12 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT (CONTINUED) IDENTIFICATION OF SPECIFIC CHEMICAL SUBSTANCE AND MIXTURE TESTING REQUIREMENTS General Provisions § 799.12...

  16. A Theory-Based Approach to Understanding Follow-up of Abnormal Pap Tests

    PubMed Central

    Breitkopf, Carmen Radecki; Pearson, Heidi C.

    2009-01-01

    We applied a general theoretical framework to understand intentions to attend recommended follow-up for abnormal Pap results. Participants were 338 women attending university-affiliated clinics. Intention was associated with favorable attitudes toward follow-up (OR=5.3); perceiving attending follow-up as consistent with one’s self-concept (OR=3.0); self-efficacy (OR=1.8); and believing one would be told exactly what is wrong (OR=1.3). Intention was negatively associated with believing the problem could be avoided by not returning for follow-up (OR=0.75). Beliefs, affect and attitudes differed by race and ethnicity (all p<0.05). Attendance at follow-up was related to attitude and self-concept (both p<0.05). Results have implications for theory development and patient education. PMID:19293297

  17. Results of the HESSI Test Mishap Investigation

    NASA Technical Reports Server (NTRS)

    Worth, Daniel B.; Phillips, Rodney N.; Kross, Dennis A. (Technical Monitor)

    2000-01-01

    On March 21, 2000, the High-Energy Solar Spectroscopic Imager (HESSI) spacecraft was subjected to a series of vibration tests at the Jet Propulsion Laboratory (JPL) as a part of its flight certification program. The structural qualification test, denoted as the sineburst test, subjected the spacecraft to a major overtest that resulted in significant structural damage to the spacecraft. The HESSI Test Mishap Investigation Board (MIB) was formed on March 24, 2000, in response to a NASA headquarters request. Board membership included experts from NASA and the University of California at Berkeley. This paper will present the investigation methods, findings, and lessons learned from the HESSI mishap.

  18. Cone Penetrometer N Factor Determination Testing Results

    SciTech Connect

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  19. Recent Radiation Test Results for Power MOSFETs

    NASA Technical Reports Server (NTRS)

    Lauenstein, Jean-Marie; Topper, Alyson D.; Casey, Megan C.; Wilcox, Edward P.; Phan, Anthony M.; Kim, Hak S.; LaBel, Kenneth A.

    2013-01-01

    Single-event effect (SEE) and total ionizing dose (TID) test results are presented for various hardened and commercial power metal-oxide-semiconductor field effect transistors (MOSFETs), including vertical planar, trench, superjunction, and lateral process designs.

  20. Experimental results for absolute cylindrical wavefront testing

    NASA Astrophysics Data System (ADS)

    Reardon, Patrick J.; Alatawi, Ayshah

    2014-09-01

    Applications for Cylindrical and near-cylindrical surfaces are ever-increasing. However, fabrication of high quality cylindrical surfaces is limited by the difficulty of accurate and affordable metrology. Absolute testing of such surfaces represents a challenge to the optical testing community as cylindrical reference wavefronts are difficult to produce. In this paper, preliminary results for a new method of absolute testing of cylindrical wavefronts are presented. The method is based on the merging of the random ball test method with the fiber optic reference test. The random ball test assumes a large number of interferograms of a good quality sphere with errors that are statistically distributed such that the average of the errors goes to zero. The fiber optic reference test utilizes a specially processed optical fiber to provide a clean high quality reference wave from an incident line focus from the cylindrical wave under test. By taking measurements at different rotation and translations of the fiber, an analogous procedure can be employed to determine the quality of the converging cylindrical wavefront with high accuracy. This paper presents and discusses the results of recent tests of this method using a null optic formed by a COTS cylindrical lens and a free-form polished corrector element.

  1. Treadmill exercise tests predischarge and six weeks post-myocardial infarction to detect abnormalities of known prognostic value.

    PubMed

    Starling, M R; Crawford, M H; Kennedy, G T; O'Rourke, R A

    1981-06-01

    We evaluated 89 patients with predischarge and 6-week post-myocardial infarction treadmill exercise tests to determine the importance of doing repeat tests to identify abnormalities of known prognostic value, and assess the individual variability of treadmill abnormality responses. Nineteen patients (21%) completed only a predischarge exercise test, nine of whom experienced an early cardiac event precluding repeat testing. All nine had a prognostically important treadmill abnormality during the predischarge test. Electrocardiographic ST segment depression was highly reproducible between the early and 6-week tests (k = 0.968). However, angina, inadequate blood pressure response, and ventricular arrhythmias showed limited reproducibility (k = 0.344, 0.50, and 0.166, respectively) and substantial individual variability. Thus, we concluded that: a predischarge treadmill exercise test is important for determining the immediate short-term prognosis of patients after myocardial infarction; and ST segment depression is highly reproducible, whereas other treadmill abnormality responses show substantial variability between the predischarge and 6-week tests.

  2. Punch valve development testing: Low and high velocity test results

    SciTech Connect

    Replogle, W.C.; Brandon, S.L.

    1996-09-01

    This is a report on the use of quasi-static tests to predict fundamental parameters for punch valve development. This report summarizes the results from low and high velocity tests performed with 0.63 and 0.38 cm diameter plungers, 5 cm long penetrating aluminium and composite targets. The low velocity tests, 0.025 m/s, were performed to understand the effects and interactions of plunger diameter plunger tip shape, target material, and target support on penetration energy and plunger functionality. High velocity tests, 75 m/s, were compared to low velocity results.

  3. CEBAF'S New RF Separator Structure Test Results

    SciTech Connect

    Reza Kazimi; Jock Fugitt; A. Krycuk; Charles Sinclair; Larry Turlington

    1993-05-01

    Prototypes of the rf separator for CEBAF have been made and successfully beam tested. The structure is a new design which has a high transverse shunt impedance together with a small transverse dimension compared to more conventional rf deflecting structures. Five rf separators will be used at CEBAF to allow beam from any one of the five recirculation passes to be delivered to any of the three experimental halls. The authors have already described the basic design of the structure and theoretical calculations. They have also reported some results from rf measurements and beam tests. In this paper they present more beam test results, their final design parameters, and test results of coupling two 1/2 wavelength cavities together.

  4. NEXT Single String Integration Test Results

    NASA Technical Reports Server (NTRS)

    Soulas, George C.; Patterson, Michael J.; Pinero, Luis; Herman, Daniel A.; Snyder, Steven John

    2010-01-01

    As a critical part of NASA's Evolutionary Xenon Thruster (NEXT) test validation process, a single string integration test was performed on the NEXT ion propulsion system. The objectives of this test were to verify that an integrated system of major NEXT ion propulsion system elements meets project requirements, to demonstrate that the integrated system is functional across the entire power processor and xenon propellant management system input ranges, and to demonstrate to potential users that the NEXT propulsion system is ready for transition to flight. Propulsion system elements included in this system integration test were an engineering model ion thruster, an engineering model propellant management system, an engineering model power processor unit, and a digital control interface unit simulator that acted as a test console. Project requirements that were verified during this system integration test included individual element requirements ; integrated system requirements, and fault handling. This paper will present the results of these tests, which include: integrated ion propulsion system demonstrations of performance, functionality and fault handling; a thruster re-performance acceptance test to establish baseline performance: a risk-reduction PMS-thruster integration test: and propellant management system calibration checks.

  5. Test result management in global health settings.

    PubMed

    Palazuelos, Daniel; Payne, Jonathan D; Dalal, Anuj K

    2012-09-01

    Across the globe, the ways in which patients' test results are managed are as varied as the many different types of healthcare systems that manage these data. The outcomes, however, are often not too dissimilar: too many clinically significant test results fall through the cracks. The consequences of not following up test results in a timely manner are serious and often devastating to patients: diagnoses are delayed, treatments are not initiated or altered in time, and diseases progress. In resource-poor settings, test results too commonly get filed away within the paper chart in ways that isolate them and prevent passage to future providers caring for a patient. To make matters worse, the onus to act upon these test results often rests on patients who need to return to the clinic within a specified timeframe in order to obtain their results but who may not have the means or are too ill to do so. Even in more developed healthcare settings that use electronic records, clinical data residing in the electronic medical record (EMR) are often stubbornly "static"-key pieces of clinical information are frequently not recognized, retrieved, or shared easily. In this way, EMRs are not unlike paper record systems, and therefore, EMRs alone will not solve this problem. To illustrate this problem, consider the case of a patient newly diagnosed with HIV in 3 different healthcare delivery settings.

  6. Test Result Management in Global Health Settings

    PubMed Central

    Palazuelos, Daniel; Payne, Jonathan D.

    2012-01-01

    OVERVIEW Across the globe, the ways in which patients' test results are managed are as varied as the many different types of healthcare systems that manage these data. The outcomes, however, are often not too dissimilar: too many clinically significant test results fall through the cracks. The consequences of not following up test results in a timely manner are serious and often devastating to patients: diagnoses are delayed, treatments are not initiated or altered in time, and diseases progress. In resource-poor settings, test results too commonly get filed away within the paper chart in ways that isolate them and prevent passage to future providers caring for a patient. To make matters worse, the onus to act upon these test results often rests on patients who need to return to the clinic within a specified timeframe in order to obtain their results but who may not have the means or are too ill to do so. Even in more developed healthcare settings that use electronic records, clinical data residing in the electronic medical record (EMR) are often stubbornly “static”—key pieces of clinical information are frequently not recognized, retrieved, or shared easily. In this way, EMRs are not unlike paper record systems, and therefore, EMRs alone will not solve this problem. To illustrate this problem, consider the case of a patient newly diagnosed with HIV in 3 different healthcare delivery settings. PMID:24278831

  7. BPX insulation irradiation program test results

    SciTech Connect

    McManamy, T.J. ); Kanemoto, G. ); Snook, P.G. . Plasma Physics Lab.)

    1991-01-01

    The toroidal field coil insulation for the Burning Plasma Experiment (BPX) is expected to receive a radiation dose of nearly 10{sup 10} rad and to withstand significant mechanical stresses. An irradiation test program was performed at the Idaho National Engineering Laboratory (INEL) using the Advanced Technology Reactor (ATR) for irradiations to doses on the order of 3 {times} 10{sup 10} rad. The flexure and shear strength with compression of commercially procured sheet material were reported earlier. A second series of tests has been performed to slightly higher dose levels with vacuum impregnated materials, glass strand material, and Spaulrad-S sheet samples. Vacuum impregnation with a Shell 9405 resin and 9470 hardener was used to produce bonded copper squares and flexure samples of both pure resin and resin with S-glass. A new test fixture was developed to test the bonded samples in shear without applied compression. The Spaulrad-S flexure samples demonstrated a loss of strength with irradiation, similar to previous results. The pure resin lost nearly all flexibility, while the S-glass-reinforced samples retained between 30% and 40% of the initial flexure strength. The S-glass strands showed a 30% loss of strength at the higher dose level when tested in tension. The bonded copper squares had a low room-temperature shear strength of approximately 17 MPa before irradiation, which was unchanged in the irradiated samples. Shear testing of unirradiated bonded copper squares with ten different types of surface treatment revealed that the low shear strength resulted from the polyurethane primer used. In the later series of test, the epoxy-based primers and DZ-80 from Ciba-Geigy did much better, with shear strengths on the order of 40 MPa. These samples also demonstrated a resistance to cryogenic shock. One irradiated bonded sample was tested up 10 210 MPa in compression, the limit of the test fixture, without failure.

  8. Prevalence of extracranial venous abnormalities: results from a sample of 586 multiple sclerosis patients

    PubMed Central

    Simka, Marian; Latacz, Pawel; Ludyga, Tomasz; Kazibudzki, Marek; Świerad, Marcin; Janas, Piotr; Piegza, Jacek

    Summary The aim of this study was to assess the prevalence of chronic cerebrospinal venous insufficiency in an unselected cohort of multiple sclerosis (MS) patients. A total of 586 patients with clinically defined MS underwent catheter venography of the internal jugular veins, brachiocephalic veins and azygos vein. The following findings were regarded as pathologic: no outflow, slowed outflow, reversal of flow direction, prestenotic dilation accompanied by impaired outflow, outflow through collaterals, intraluminal structures obstructing the vein, hypoplasia, agenesia or significant narrowing of the vein. Venous abnormalities were found in 563 patients (96.1%). Lesions in one vein were found in 43.5%, in two veins in 49.5%, and in three veins in 3.1% of patients. Venous pathologies in the right internal jugular vein were found in 64.0% of patients, in the left internal jugular vein in 81.7%, in the left brachiocephalic vein in 1.0%, and in the azygos vein in 4.9%. Venous pathologies were found to be highly associated with MS, yet the clinical relevance of this phenomenon remains to be established. PMID:22364940

  9. Prevalence of extracranial venous abnormalities: results from a sample of 586 multiple sclerosis patients.

    PubMed

    Simka, M; Latacz, P; Ludyga, T; Kazibudzki, M; Swierad, M; Janas, P; Piegza, J

    2011-01-01

    The aim of this study was to assess the prevalence of chronic cerebrospinal venous insufficiency in an unselected cohort of multiple sclerosis (MS) patients. A total of 586 patients with clinically defined MS underwent catheter venography of the internal jugular veins, brachiocephalic veins and azygos vein. The following findings were regarded as pathologic: no outflow, slowed outflow, reversal of flow direction, prestenotic dilation accompanied by impaired outflow, outflow through collaterals, intraluminal structures obstructing the vein, hypoplasia, agenesia or significant narrowing of the vein. Venous abnormalities were found in 563 patients (96.1%). Lesions in one vein were found in 43.5%, in two veins in 49.5%, and in three veins in 3.1% of patients. Venous pathologies in the right internal jugular vein were found in 64.0% of patients, in the left internal jugular vein in 81.7%, in the left brachiocephalic vein in 1.0%, and in the azygos vein in 4.9%. Venous pathologies were found to be highly associated with MS, yet the clinical relevance of this phenomenon remains to be established.

  10. Testing alleged mediumship: methods and results.

    PubMed

    O'keeffe, Ciarán; Wiseman, Richard

    2005-05-01

    Mediums claim to be able to communicate with the deceased. Such claims attract a considerable amount of public interest and, if valid, have important implications for many areas of psychology. For over 100 years, researchers have tested alleged mediums. This work has obtained mixed results and provoked a considerable amount of methodological debate. This paper reviews the key issues in this debate, describes how the authors devised a method of testing that aimed to prevent the many problems that have hindered past research, and how they then used this method to test several professional mediums. The results of this work did not support the existence of genuine mediumistic ability. Competing interpretations of these results are discussed, along with ways in which the methodology presented in the paper could be used to assess conceptually similar, but non-paranormal, claims made in clinical, occupational and forensic contexts.

  11. Inducible Expression of Runx2 Results in Multiorgan Abnormalities in Mice

    PubMed Central

    He, Nan; Xiao, Zhousheng; Yin, Tong; Stubbs, Jason; Li, Linheng; Quarles, L. Darryl

    2016-01-01

    Runx2 is a transcription factor controlling skeletal development, and is also expressed in extraskeletal tissues where its function is not well understood. Existing Runx2 mutant and transgenic mouse models do not allow the necessary control of Runx2 expression to understand its functions in different tissues. We generated conditional, doxycyline-inducible, triple transgenic mice (CMV-Cre;ROSA26-neoflox/+-rtTA;Tet-O-Runx2) to investigate the effects of wide spread overexpression of Runx2. Osteoblasts isolated from CMV-Cre;ROSA26-neoflox/+-rtTA; Tet-O-Runx2 mice demonstrated a dose-dependent effect of doxycycline to stimulate Runx2 transgene expression. Doxycycline administration to CMV-Cre;ROSA26-neoflox/+-rtTA;Tet-O-Runx2 mice induced Runx2 transgene expression in all tissues tested, with the highest levels observed in kidney, ovary, and bone. Runx2 overexpression resulted in deceased body size and reduced viability. With regard to bone, Runx2 overexpressing mice paradoxically displayed profound osteopenia and diminished osteogenesis. Induced expression of Runx2 in extraskeletal tissues resulted in ectopic calcification and induction of the osteogenic program in a limited number of tissues, including lung and muscle. In addition, the triple transgenic mice showed evidence of a myeloproliferative disorder and an apparent inhibition of lymphocyte development. Thus, overexpression of Runx2 both within and outside of the skeleton can have diverse biological effects. Use of tissue specific Cre mice will allow this model to be used to conditionally and inducibly overexpress Runx2 in different tissues and provide a means to study the post-natal tissue- and cell context-dependent functions of Runx2. PMID:21268087

  12. Cascade Distiller System Performance Testing Interim Results

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Pensinger, Stuart; Sargusingh, Miriam J.

    2014-01-01

    The Cascade Distillation System (CDS) is a rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. Based upon the results of the 2009 distillation comparison test (DCT) and recommendations of the expert panel, the Advanced Exploration Systems (AES) Water Recovery Project (WRP) project advanced the technology by increasing reliability of the system through redesign of bearing assemblies and improved rotor dynamics. In addition, the project improved the CDS power efficiency by optimizing the thermoelectric heat pump (TeHP) and heat exchanger design. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell d International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades as compared to previous system performance. The system was challenged with Solution 1 from the NASA Exploration Life Support (ELS) distillation comparison testing performed in 2009. Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. A secondary objective of this testing is to evaluate the performance of the CDS as compared to the state of the art Distillation Assembly (DA) used in the ISS Urine Processor Assembly (UPA). This was done by challenging the system with ISS analog waste streams. This paper details the results of the AES WRP CDS performance testing.

  13. Abnormal EKG stress test in rats with type 1 diabetes is deterred with low-intensity exercise programme.

    PubMed

    Smirnova, I V; Kibiryeva, N; Vidoni, E; Bunag, R; Stehno-Bittel, L

    2006-11-01

    The focus of this study was to determine whether minimal levels of exercise could halt the formation of diabetes-induced heart pathology. Seven-week-old male rats were divided into four groups: sedentary nondiabetic, exercise-trained non-diabetic, sedentary diabetic and exercise-trained diabetic. Individualised exercise programmes were based on the animal's tolerance, and continued for 7 weeks after the induction of diabetes. At the completion of the study, no differences were found in skeletal muscle citrate synthase activity between diabetic sedentary and exercise-trained rats, indicating that the exercise was low intensity. Diabetes-induced heart hypertrophy was not reversed with exercise as measured by heart-to-body weight ratios and EKG (R wave height). There was no statistical difference between groups in the response to an exercise stress test prior to the induction of diabetes. However, 4 weeks of diabetes resulted in a significant decrease in resting and post-stress test heart rates (9% and 20%, respectively), which remained depressed at week 7. The sedentary diabetic animals demonstrated an abnormal response during the recovery period of the EKG exercise test, which was not present in non-diabetic or exercise-trained diabetic animals. In conclusion, lowintensity exercise training improved the cardiac response to an exercise stress test in diabetic animals.

  14. SLD liquid argon calorimeter prototype test results

    SciTech Connect

    Dubois, R.; Eigen, G.; Au, Y.; Sleeman, J.; Breidenbach, M.; Brau, J.; Ludgate, G.A.; Oram, C.J.; Cook, V.; Johnson, J.

    1985-10-01

    The results of the SLD test beam program for the selection of a calorimeter radiator composition within a liquid argon system are described, with emphasis on the study of the use of uranium to obtain equalization of pion and electron responses.

  15. Comparing diagnostic tests: trials in people with discordant test results.

    PubMed

    Hooper, R; Díaz-Ordaz, K; Takeda, A; Khan, K

    2013-06-30

    Diagnostic tests are traditionally compared for accuracy against a gold standard but can also be compared prospectively in a trial. A conventional trial comparing two tests would randomize each participant to a testing strategy, but a more efficient alternative is to give both tests to all participants and follow up those with discordant results. Participants could be randomized before or after testing. The statistical analysis of such a trial has not previously been described. We investigated two estimates of the risk difference for a binary outcome: one based on analysing outcomes as if from a conventional trial and one combining estimates of different parameters in the manner of a decision analysis. We show that the trial estimate and decision analysis estimate are both unbiased and derive approximate formulae for their standard errors. By using the decision analysis estimate (but not the trial estimate), the same precision can be achieved by randomizing before testing as by randomizing after. To avoid destroying equipoise, and to allow consenting and randomizing to be carried out at the same visit, we recommend randomizing before testing. Giving both tests to all participants means fewer need to be recruited: in one example from the literature, the proposed design was nearly four times more efficient in this sense than a conventional trial design. PMID:23172716

  16. The Ohio Patient Navigation Research Program (OPNRP): Does the American Cancer Society patient navigation model improve time to resolution among patients with abnormal screening tests?

    PubMed Central

    Paskett, Electra D.; Katz, Mira L.; Post, Douglas M.; Pennell, Michael L.; Young, Gregory S.; Seiber, Eric E.; Harrop, J. Phil; DeGraffinreid, Cecilia R.; Tatum, Cathy M.; Dean, Julie A.; Murray, David M.

    2013-01-01

    Background Patient navigation (PN) has been suggested as a way to reduce cancer health disparities; however, many models of PN exist and most have not been carefully evaluated. The goal of this study was to test the Ohio American Cancer Society model of PN as it relates to reducing time to diagnostic resolution among persons with abnormal breast, cervical, or colorectal cancer screening tests or symptoms. Methods 862 patients from 18 clinics participated in this group-randomized trial. Chart review documented the date of the abnormality and the date of resolution. The primary analysis used shared frailty models to test for the effect of PN on time to resolution. Crude Hazard Ratios (HR)were used since there was no evidence of confounding. Costs were tracked with a 52-item instrument that recorded fixed costs of running a PN program and operational costs of navigating patients. Results HRs became significant at 6 months; conditional on the random clinic effect, the resolution rate at 15 months was 65% higher in the PN arm (p=0.012 for difference in risk across arms; p=0.009) for an increase in relative risk over time. The cost of navigating to diagnostic resolution averaged $150 per participant. Conclusions Participants with abnormal cancer screening tests or symptoms resolved faster if assigned to PN compared to those not assigned to PN. The effect of PN became apparent beginning six months after detection of the abnormality. Impact PN may help address health disparities by reducing time to resolution after an abnormal cancer screening test. PMID:23045536

  17. Loss of PiT-1 results in abnormal endocytosis in the yolk sac visceral endoderm.

    PubMed

    Wallingford, Mary C; Giachelli, Cecilia M

    2014-08-01

    PiT-1 protein is a transmembrane sodium-dependent phosphate (Pi) transporter. PiT-1 knock out (KO) embryos die from largely unknown causes by embryonic day (E) 12.5. We tested the hypothesis that PiT-1 is required for endocytosis in the embryonic yolk sac (YS) visceral endoderm (VE). Here we present data supporting that PiT-1 KO results in a YS remodeling defect and decreased endocytosis in the YS VE. The remodeling defect is not due to an upstream cardiomyocyte requirement for PiT-1, as SM22αCre-specific KO of PiT-1 in the developing heart and the YS mesodermal layer (ME) does not recapitulate the PiT-1 global KO phenotype. Furthermore, we find that high levels of PiT-1 protein localize to the YS VE apical membrane. Together these data support that PiT-1 is likely required in YS VE. During normal development maternal immunoglobulin (IgG) is endocytosed into YS VE and accumulates in the apical side of the VE in a specialized lysosome termed the apical vacuole (AV). We have identified a reduction in PiT-1 KO VE cell height and a striking loss of IgG accumulation in the PiT-1 KO VE. The endocytosis genes Tfeb, Lamtor2 and Snx2 are increased at the RNA level. Lysotracker Red staining reveals a loss of distinct AVs, and yolk sacs incubated ex vivo with phRODO Green Dextran for Endocytosis demonstrate a functional loss of endocytosis. As yolk sac endocytosis is controlled in part by microautophagy, but expression of LC3 had not been examined, we investigated LC3 expression during yolk sac development and found stage-specific LC3 RNA expression that is predominantly from the YS VE layer at E9.5. Normalized LC3-II protein levels are decreased in the PiT-1 KO YS, supporting a requirement for PiT-1 in autophagy in the YS. Therefore, we propose the novel idea that PiT-1 is central to the regulation of endocytosis and autophagy in the YS VE.

  18. CLSM bleed water reduction test results

    SciTech Connect

    Langton, C.A.; Rajendran, N.

    1997-04-21

    Previous testing by BSRI/SRTC/Raytheon indicated that the CLSM specified for the Tank 20 closure generates about 6 gallons (23 liters) of bleed water per cubic yard of material (0.76 m3).1 This amount to about 10 percent of the total mixing water. HLWE requested that the CLSM mix be optimized to reduce bleed water while maintaining flow. Elimination of bleed water from the CLSM mix specified for High-Level Waste Tank Closure will result in waste minimization, time savings and cost savings. Over thirty mixes were formulated and evaluated at the on-site Raytheon Test Laboratory. Improved low bleed water CLSM mixes were identified. Results are documented in this report.

  19. Results from the final focus test beam

    SciTech Connect

    Burke, D.L.; Final Focus Test Beam Collaboration

    1994-07-01

    first experimental results from the Final Focus Test Beam (FFTB) are given in this report. The FFTB has been constructed as a prototype for the final focus system of a future TeV-scale electron-positron linear collider. The vertical dimension of the 47 GeV electron beam form the SLAC linac has been reduced at the focal point of the FFTB by a demagnification of 320 to a beam height of approximately 70 nanometers.

  20. Boeing's STAR-FODB test results

    NASA Astrophysics Data System (ADS)

    Fritz, Martin E.; de la Chapelle, Michael; Van Ausdal, Arthur W.

    1995-05-01

    Boeing has successfully concluded a 2 1/2 year, two phase developmental contract for the STAR-Fiber Optic Data Bus (FODB) that is intended for future space-based applications. The first phase included system analysis, trade studies, behavior modeling, and architecture and protocal selection. During this phase we selected AS4074 Linear Token Passing Bus (LTPB) protocol operating at 200 Mbps, along with the passive, star-coupled fiber media. The second phase involved design, build, integration, and performance and environmental test of brassboard hardware. The resulting brassboard hardware successfully passed performance testing, providing 200 Mbps operation with a 32 X 32 star-coupled medium. This hardware is suitable for a spaceflight experiment to validate ground testing and analysis and to demonstrate performace in the intended environment. The fiber bus interface unit (FBIU) is a multichip module containing transceiver, protocol, and data formatting chips, buffer memory, and a station management controller. The FBIU has been designed for low power, high reliability, and radiation tolerance. Nine FBIUs were built and integrated with the fiber optic physical layer consisting of the fiber cable plant (FCP) and star coupler assembly (SCA). Performance and environmental testing, including radiation exposure, was performed on selected FBIUs and the physical layer. The integrated system was demonstrated with a full motion color video image transfer across the bus while simultaneously performing utility functions with a fiber bus control module (FBCM) over a telemetry and control (T&C) bus, in this case AS1773.

  1. Aquifer test results, Green Swamp area, Florida

    USGS Publications Warehouse

    Tibbals, C.H.; Grubb, Hayes F.

    1982-01-01

    An aquifer test conducted in the Green Swamp area December 15-16 , 1975 was designed to stress the uppermost part of the Floridan aquifer so that the leakage characteristics of the overlying confining bed could be determined. A well tapping the upper part of the Floridan aquifer was pumped at a rate of about 1,040 gallons per minute for 35 hours; drawdown was measured in the Floridan aquifer and in two horizons in the confining bed. Analysis of the data indicates that the transmissivity of the uppper 160 feet of the Floridan is 13,000 square feet per day, the storage coefficient is about 0.0002.5, and the overlying confining bed leakance coefficient is about 0.02 to 0.025 per day. The vertical hydraulic diffusivity of the confining bed ranged from 610 square feet per day to 16,000 square feet per day. Results of the test indicate that, in the area of the test site, a Floridan aquifer well field would induce additional recharge to the Floridan. As a result of that increased recharge , water levels in the surficial aquifer would tend to stand lower, runoff from the area would tend to be less, and, perhaps, evapotranspiration would be less than normal.(USGS)

  2. Highly Loaded Composite Strut Test Results

    NASA Technical Reports Server (NTRS)

    Wu, K. C.; Jegley, Dawn C.; Barnard, Ansley; Phelps, James E.; McKeney, Martin J.

    2011-01-01

    Highly loaded composite struts from a proposed truss-based Altair lunar lander descent stage concept were selected for development under NASA's Advanced Composites Technology program. Predicted compressive member forces during launch and ascent of over -100,000 lbs were much greater than the tensile loads. Therefore, compressive failure modes, including structural stability, were primary design considerations. NASA's industry partner designed and built highly loaded struts that were delivered to NASA for testing. Their design, fabricated on a washout mandrel, had a uniform-diameter composite tube with composite tapered ends. Each tapered end contained a titanium end fitting with facing conical ramps that are overlaid and overwrapped with composite materials. The highly loaded struts were loaded in both tension and compression, with ultimate failure produced in compression. Results for the two struts tested are presented and discussed, along with measured deflections, strains and observed failure mechanisms.

  3. GENIE Flight Test Results and System Overview

    NASA Technical Reports Server (NTRS)

    Brady, Tye; Paschall, Stephen, II; Crain, Timothy P., II; Demars, Kyle; Bishop, Robert

    2011-01-01

    NASA has envisioned a suite of lander test vehicles that will be flown in Earth s atmosphere to incrementally demonstrate applicable lunar lander performance in the terrestrial environment. As each terrestrial rocket progresses in maturity, relevant space flight technology matures to a higher technology readiness level, preparing it for inclusion on a future lunar lander design.. NASA s "Project M" lunar mission concept flew its first terrestrial rocket, RR1, in June 2010 in Caddo Mills, Texas. The Draper Laboratory built GENIE (Guidance Embedded Navigator Integration Environment) successfully demonstrated accurate, real time, embedded performance of Project M navigation and guidance algorithms in a highly dynamic environment. The RR1 vehicle, built by Armadillo Aerospace, performed a successful 60 second free flight and gave the team great confidence in Project M s highly reliable and robust GNC system design and implementation. This paper provides an overview of the GENIE system and describes recent flight performance test results onboard the RR1 terrestrial rocket.

  4. Results from the STAR TPC system test

    SciTech Connect

    Betts, W.; Bieser, F.; Bossingham, R.

    1996-12-31

    A system test of various components of the Solenoidal Tracker at RHIC (STAR) detector, operating in concern, has recently come on-line. Communication between a major sub-detector, a sector of the Time Projection Chamber (TPC), and the trigger, data acquisition and slow controls systems has been established, enabling data from cosmic ray muons to be collected. First results from an analysis of the TPC data are presented. These include measurements of system noise, electronic parameters such as amplifier gains and pedestal values, and tracking resolution for cosmic ray muons and laser induced ionization tracks. A discussion on the experience gained in integrating the different components for the system test is also given.

  5. PHASE I SINGLE CELL ELECTROLYZER TEST RESULTS

    SciTech Connect

    Steimke, J; Timothy Steeper, T

    2008-08-05

    This document reports the results of Phase I Single Cell testing of an SO{sub 2}-Depolarized Water Electrolyzer. Testing was performed primarily during the first quarter of FY 2008 at the Savannah River National Laboratory (SRNL) using an electrolyzer cell designed and built at SRNL. Other facility hardware were also designed and built at SRNL. This test further advances this technology for which work began at SRNL in 2005. This research is valuable in achieving the ultimate goal of an economical hydrogen production process based on the Hybrid Sulfur (HyS) Cycle. The focus of this work was to conduct single cell electrolyzer tests to further develop the technology of SO{sub 2}-depolarized electrolysis as part of the HyS Cycle. The HyS Cycle is a hybrid thermochemical cycle that may be used in conjunction with advanced nuclear reactors or centralized solar receivers to produce hydrogen by water-splitting. Like all other sulfur-based cycles, HyS utilizes the high temperature thermal decomposition of sulfuric acid to produce oxygen and regenerate sulfur dioxide. The unique aspect of HyS is the generation of hydrogen in a water electrolyzer that is operated under conditions where dissolved sulfur dioxide depolarizes the anodic reaction, resulting in substantial voltage reduction. Low cell voltage is essential for both thermodynamic efficiency and hydrogen cost. Sulfur dioxide is oxidized at the anode, producing sulfuric acid that is sent to the high temperature acid decomposition portion of the cycle. The electrolyzer cell uses the membrane electrode assembly (MEA) concept. The anode and cathode are formed by spraying platinum containing catalyst on both sides of a Proton Exchange Membrane (PEM). In most testing the material of the PEM was NafionR. The electrolyzer cell active area can be as large as 54.8 cm{sup 2}. Feed to the anode of the electrolyzer is a sulfuric acid solution containing sulfur dioxide. The partial pressure of sulfur dioxide could be varied in the

  6. Test Results From a High Power Linear Alternator Test Rig

    NASA Technical Reports Server (NTRS)

    Birchenough, Arthur G.; Hervol, David S.; Gardner, Brent G.

    2010-01-01

    Stirling cycle power conversion is an enabling technology that provides high thermodynamic efficiency but also presents unique challenges with regard to electrical power generation, management, and distribution. The High Power Linear Alternator Test Rig (HPLATR) located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio is a demonstration test bed that simulates electrical power generation from a Stirling engine driven alternator. It implements the high power electronics necessary to provide a well regulated DC user load bus. These power electronics use a novel design solution that includes active rectification and power factor control, active ripple suppression, along with a unique building block approach that permits the use of high voltage or high current alternator designs. This report describes the HPLATR, the test program, and the operational results.

  7. Test Results from a High Power Linear Alternator Test Rig

    NASA Technical Reports Server (NTRS)

    Birchenough, Arthur G.; Hervol, David S.; Gardner, Brent G.

    2010-01-01

    Stirling cycle power conversion is an enabling technology that provides high thermodynamic efficiency but also presents unique challenges with regard to electrical power generation, management, and distribution. The High Power Linear Alternator Test Rig (HPLATR) located at the NASA Glenn Research Center (GRC) in Cleveland, OH is a demonstration test bed that simulates electrical power generation from a Stirling engine driven alternator. It implements the high power electronics necessary to provide a well regulated DC user load bus. These power electronics use a novel design solution that includes active rectification and power factor control, active ripple suppression, along with a unique building block approach that permits the use of high voltage or high current alternator designs. This presentation describes the HPLATR, the test program, and the operational results.

  8. Advanced Thermal Simulator Testing: Thermal Analysis and Test Results

    NASA Technical Reports Server (NTRS)

    Bragg-Sitton, Shannon M.; Dickens, Ricky; Dixon, David; Reid, Robert; Adams, Mike; Davis, Joe

    2008-01-01

    Work at the NASA Marshall Space Flight Center seeks to develop high fidelity, electrically heated thermal simulators that represent fuel elements in a nuclear reactor design to support non-nuclear testing applicable to the development of a space nuclear power or propulsion system. Comparison between the fuel pins and thermal simulators is made at the outer fuel clad surface, which corresponds to the outer sheath surface in the thermal simulator. The thermal simulators that are currently being tested correspond to a SNAP derivative reactor design that could be applied for Lunar surface power. These simulators are designed to meet the geometric and power requirements of a proposed surface power reactor design, accommodate testing of various axial power profiles, and incorporate imbedded instrumentation. This paper reports the results of thermal simulator analysis and testing in a bare element configuration, which does not incorporate active heat removal, and testing in a water-cooled calorimeter designed to mimic the heat removal that would be experienced in a reactor core.

  9. Advanced Thermal Simulator Testing: Thermal Analysis and Test Results

    SciTech Connect

    Bragg-Sitton, Shannon M.; Dickens, Ricky; Dixon, David; Reid, Robert; Adams, Mike; Davis, Joe

    2008-01-21

    Work at the NASA Marshall Space Flight Center seeks to develop high fidelity, electrically heated thermal simulators that represent fuel elements in a nuclear reactor design to support non-nuclear testing applicable to the potential development of a space nuclear power or propulsion system. Comparison between the fuel pins and thermal simulators is made at the outer fuel clad surface, which corresponds to the outer sheath surface in the thermal simulator. The thermal simulators that are currently being tested correspond to a liquid metal cooled reactor design that could be applied for Lunar surface power. These simulators are designed to meet the geometric and power requirements of a proposed surface power reactor design, accommodate testing of various axial power profiles, and incorporate imbedded instrumentation. This paper reports the results of thermal simulator analysis and testing in a bare element configuration, which does not incorporate active heat removal, and testing in a water-cooled calorimeter designed to mimic the heat removal that would be experienced in a reactor core.

  10. Arc melter demonstration baseline test results

    SciTech Connect

    Soelberg, N.R.; Chambers, A.G.; Anderson, G.L.; Oden, L.L.; O`Connor, W.K.; Turner, P.C.

    1994-07-01

    This report describes the test results and evaluation for the Phase 1 (baseline) arc melter vitrification test series conducted for the Buried Waste Integrated Demonstration program (BWID). Phase 1 tests were conducted on surrogate mixtures of as-incinerated wastes and soil. Some buried wastes, soils, and stored wastes at the INEL and other DOE sites, are contaminated with transuranic (TRU) radionuclides and hazardous organics and metals. The high temperature environment in an electric arc furnace may be used to process these wastes to produce materials suitable for final disposal. An electric arc furnace system can treat heterogeneous wastes and contaminated soils by (a) dissolving and retaining TRU elements and selected toxic metals as oxides in the slag phase, (b) destroying organic materials by dissociation, pyrolyzation, and combustion, and (c) capturing separated volatilized metals in the offgas system for further treatment. Structural metals in the waste may be melted and tapped separately for recycle or disposal, or these metals may be oxidized and dissolved into the slag. The molten slag, after cooling, will provide a glass/ceramic final waste form that is homogeneous, highly nonleachable, and extremely durable. These features make this waste form suitable for immobilization of TRU radionuclides and toxic metals for geologic timeframes. Further, the volume of contaminated wastes and soils will be substantially reduced in the process.

  11. Preliminary test results for the SVX4

    SciTech Connect

    Christofek, L.; Hanagaki, K.; Rapidis, P.; Utes, M.; /Fermilab

    2005-06-01

    We present and summarize the preliminary test results for SVX4 chip testing. There are presently two versions of the SVX4. Version 2 has on-chip bypassing and Version 1 does not. The on-chip bypassing is a layer of transistors under the front-end analog pipeline that acts as a bypassing capacitor for the voltage supply. Its size is about a microfarad. We aggressively choose to test Version 2 because of this feature. The feature is advantageous for hybrid design because it eliminates the need for an additional passive component on the hybrid itself by placing it on the actual SVX4 die. Also, the SVX4 was designed to operate in two modes: D. and CDF. One can set which mode the chip will operate by placing a jumper in the proper position on the SVX4 chip carrier. In either mode, the chip can either use the operating parameters from the shift register or the shadow register. Similarly, this is selected by placing a jumper on the SVX4 chip carrier. This chip has this feature because it was unknown whether the new design of the shadow register would be operable. The shadow register is also call the SEU register or Single Event Upset register. An introduction into the functionality of the chip and an explanation on the difference between D. and CDF mode can be found in the SVX4 User's Manual [1].

  12. Evaluation of the Generalizability of the Number of Abnormal Scores and the Overall Test Battery Mean as Measures of Performance Validity to a Different Test Battery.

    PubMed

    Silk-Eglit, Graham M; Miele, Andrea S; Stenclik, Jessica H; Lynch, Julie K; McCaffrey, Robert J

    2015-01-01

    Davis, Axelrod, McHugh, Hanks, and Millis (2013) documented that in a battery of 25 tests, producing 15, 10, and 5 abnormal scores at 1, 1.5, and 2 standard deviations below the norm-referenced mean, respectively, and an overall test battery mean (OTBM) of T ≤ 38 accurately identifies performance invalidity. However, generalizability of these findings to other samples and test batteries remains unclear. This study evaluated the use of abnormal scores and the OTBM as performance validity measures in a different sample that was administered a 25-test battery that minimally overlapped with Davis et al.'s test battery. Archival analysis of 48 examinees with mild traumatic brain injury seen for medico-legal purposes was conducted. Producing 18 or more, 7 or more, and 5 or more abnormal scores at 1, 1.5, and 2 standard deviations below the norm-referenced mean, respectively, and an OTBM of T ≤ 40 most accurately classified examinees; however, using Davis et al.'s proposed cutoffs in the current sample maintained specificity at or near acceptable levels. Due to convergence across studies, producing ≥5 abnormal scores at 2 standard deviations below the norm-referenced mean is the most appropriate cutoff for clinical implementation; however, for batteries consisting of a different quantity of tests than 25, an OTBM of T ≤ 38 is more appropriate.

  13. Chromothripsis in healthy individuals affects multiple protein-coding genes and can result in severe congenital abnormalities in offspring.

    PubMed

    de Pagter, Mirjam S; van Roosmalen, Markus J; Baas, Annette F; Renkens, Ivo; Duran, Karen J; van Binsbergen, Ellen; Tavakoli-Yaraki, Masoumeh; Hochstenbach, Ron; van der Veken, Lars T; Cuppen, Edwin; Kloosterman, Wigard P

    2015-04-01

    Chromothripsis represents an extreme class of complex chromosome rearrangements (CCRs) with major effects on chromosomal architecture. Although recent studies have associated chromothripsis with congenital abnormalities, the incidence and pathogenic effects of this phenomenon require further investigation. Here, we analyzed the genomes of three families in which chromothripsis rearrangements were transmitted from a mother to her child. The chromothripsis in the mothers resulted in completely balanced rearrangements involving 8-23 breakpoint junctions across three to five chromosomes. Two mothers did not show any phenotypic abnormalities, although 3-13 protein-coding genes were affected by breakpoints. Unbalanced but stable transmission of a subset of the derivative chromosomes caused apparently de novo complex copy-number changes in two children. This resulted in gene-dosage changes, which are probably responsible for the severe congenital phenotypes of these two children. In contrast, the third child, who has a severe congenital disease, harbored all three chromothripsis chromosomes from his healthy mother, but one of the chromosomes acquired de novo rearrangements leading to copy-number changes. These results show that the human genome can tolerate extreme reshuffling of chromosomal architecture, including breakage of multiple protein-coding genes, without noticeable phenotypic effects. The presence of chromothripsis in healthy individuals affects reproduction and is expected to substantially increase the risk of miscarriages, abortions, and severe congenital disease.

  14. Muscle atrophy in chronic kidney disease results from abnormalities in insulin signaling.

    PubMed

    Price, S Russ; Gooch, Jennifer L; Donaldson, Sue K; Roberts-Wilson, Tiffany K

    2010-09-01

    Muscle atrophy is a significant consequence of chronic kidney disease that increases a patient's risk of mortality and decreases their quality of life. The loss of lean body mass results, in part, from an increase in the rate of muscle protein degradation. In this review, the proteolytic systems that are activated during chronic kidney disease and the key insulin signaling pathways that regulate the protein degradative processes are described. PMID:20797566

  15. Results from the Cooler and Lead Tests

    SciTech Connect

    Green, Michael A

    2010-06-10

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10{sup 6} m{sup -1}. The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10{sup 6} A m{sup -1}. This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  16. The NASA B-757 HIRF Test Series: Flight Test Results

    NASA Technical Reports Server (NTRS)

    Moeller, Karl J.; Dudley, Kenneth L.

    1997-01-01

    In 1995, the NASA Langley Research Center conducted a series of aircraft tests aimed at characterizing the electromagnetic environment (EME) in and around a Boeing 757 airliner. Measurements were made of the electromagnetic energy coupled into the aircraft and the signals induced on select structures as the aircraft was flown past known RF transmitters. These measurements were conducted to provide data for the validation of computational techniques for the assessment of electromagnetic effects in commercial transport aircraft. This paper reports on the results of flight tests using RF radiators in the HF, VHF, and UHF ranges and on efforts to use computational and analytical techniques to predict RF field levels inside the airliner at these frequencies.

  17. Tuned Chamber Core Panel Acoustic Test Results

    NASA Technical Reports Server (NTRS)

    Schiller, Noah H.; Allen, Albert R.

    2016-01-01

    This report documents acoustic testing of tuned chamber core panels, which can be used to supplement the low-frequency performance of conventional acoustic treatment. The tuned chamber core concept incorporates low-frequency noise control directly within the primary structure and is applicable to sandwich constructions with a directional core, including corrugated-, truss-, and fluted-core designs. These types of sandwich structures have long, hollow channels (or chambers) in the core. By adding small holes through one of the facesheets, the hollow chambers can be utilized as an array of low-frequency acoustic resonators. These resonators can then be used to attenuate low-frequency noise (below 400 Hz) inside a vehicle compartment without increasing the weight or size of the structure. The results of this test program demonstrate that the tuned chamber core concept is effective when used in isolation or combined with acoustic foam treatments. Specifically, an array of acoustic resonators integrated within the core of the panels was shown to improve both the low-frequency absorption and transmission loss of the structure in targeted one-third octave bands.

  18. NKCC1-Deficiency Results in Abnormal Proliferation of Neural Progenitor Cells of the Lateral Ganglionic Eminence

    PubMed Central

    Magalhães, Ana Cathia; Rivera, Claudio

    2016-01-01

    The proliferative pool of neural progenitor cells is maintained by exquisitely controlled mechanisms for cell cycle regulation. The Na-K-Cl cotransporter (NKCC1) is important for regulating cell volume and the proliferation of different cell types in vitro. NKCC1 is expressed in ventral telencephalon of embryonic brains suggesting a potential role in neural development of this region. The ventral telencephalon is a major source for both interneuron and oligodendrocyte precursor cells. Whether NKCC1 is involved in the proliferation of these cell populations remains unknown. In order to assess this question, we monitored several markers for neural, neuronal, and proliferating cells in wild-type (WT) and NKCC1 knockout (KO) mouse brains. We found that NKCC1 was expressed in neural progenitor cells from the lateral ganglionic eminence (LGE) at E12.5. Mice lacking NKCC1 expression displayed reduced phospho-Histone H3 (PH3)-labeled mitotic cells in the ventricular zone (VZ) and reduced cell cycle reentry. Accordingly, we found a significant reduction of Sp8-labeled immature interneurons migrating from the dorsal LGE in NKCC1-deficient mice at a later developmental stage. Interestingly, at E14.5, NKCC1 regulated also the formation of Olig2-labeled oligodendrocyte precursor cells. Collectively, these findings show that NKCC1 serves in vivo as a modulator of the cell cycle decision in the developing ventral telencephalon at the early stage of neurogenesis. These results present a novel mechanistic avenue to be considered in the recent proposed involvement of chloride transporters in a number of developmentally related diseases, such as epilepsy, autism, and schizophrenia. PMID:27582690

  19. NKCC1-Deficiency Results in Abnormal Proliferation of Neural Progenitor Cells of the Lateral Ganglionic Eminence.

    PubMed

    Magalhães, Ana Cathia; Rivera, Claudio

    2016-01-01

    The proliferative pool of neural progenitor cells is maintained by exquisitely controlled mechanisms for cell cycle regulation. The Na-K-Cl cotransporter (NKCC1) is important for regulating cell volume and the proliferation of different cell types in vitro. NKCC1 is expressed in ventral telencephalon of embryonic brains suggesting a potential role in neural development of this region. The ventral telencephalon is a major source for both interneuron and oligodendrocyte precursor cells. Whether NKCC1 is involved in the proliferation of these cell populations remains unknown. In order to assess this question, we monitored several markers for neural, neuronal, and proliferating cells in wild-type (WT) and NKCC1 knockout (KO) mouse brains. We found that NKCC1 was expressed in neural progenitor cells from the lateral ganglionic eminence (LGE) at E12.5. Mice lacking NKCC1 expression displayed reduced phospho-Histone H3 (PH3)-labeled mitotic cells in the ventricular zone (VZ) and reduced cell cycle reentry. Accordingly, we found a significant reduction of Sp8-labeled immature interneurons migrating from the dorsal LGE in NKCC1-deficient mice at a later developmental stage. Interestingly, at E14.5, NKCC1 regulated also the formation of Olig2-labeled oligodendrocyte precursor cells. Collectively, these findings show that NKCC1 serves in vivo as a modulator of the cell cycle decision in the developing ventral telencephalon at the early stage of neurogenesis. These results present a novel mechanistic avenue to be considered in the recent proposed involvement of chloride transporters in a number of developmentally related diseases, such as epilepsy, autism, and schizophrenia. PMID:27582690

  20. Boeing's High Voltage Solar Tile Test Results

    NASA Technical Reports Server (NTRS)

    Reed, Brian J.; Harden, David E.; Ferguson, Dale C.; Snyder, David B.

    2002-01-01

    Real concerns of spacecraft charging and experience with solar array augmented electrostatic discharge arcs on spacecraft have minimized the use of high voltages on large solar arrays despite numerous vehicle system mass and efficiency advantages. Boeing's solar tile (patent pending) allows high voltage to be generated at the array without the mass and efficiency losses of electronic conversion. Direct drive electric propulsion and higher power payloads (lower spacecraft weight) will benefit from this design. As future power demand grows, spacecraft designers must use higher voltage to minimize transmission loss and power cable mass for very large area arrays. This paper will describe the design and discuss the successful test of Boeing's 500-Volt Solar Tile in NASA Glenn's Tenney chamber in the Space Plasma Interaction Facility. The work was sponsored by NASA's Space Solar Power Exploratory Research and Technology (SERT) Program and will result in updated high voltage solar array design guidelines being published.

  1. Lunar Water Resource Demonstration (LWRD) Test Results

    NASA Technical Reports Server (NTRS)

    Muscatello, Anthony C.; Captain, Janine E.; Quinn, Jacqueline W.; Gibson, Tracy L.; Perusich, Stephen A.; Weis, Kyle H.

    2009-01-01

    NASA has undertaken the In-Situ Resource Utilization (lSRU) project called RESOLVE (Regolith and Environment Science & Oxygen and Lunar Volatile Extraction). This project is an Earth-based lunar precursor demonstration of a system that could be sent to explore permanently shadowed polar lunar craters, where it would drill into regolith, quantify the volatiles that are present, and extract oxygen by hydrogen reduction of iron oxides. The RESOLVE chemical processing system was mounted within the CMU rover "Scarab" and successfully demonstrated on Hawaii's Mauna Kea volcano in November 2008. This technology could be used on Mars as well. As described at the 2008 Mars Society Convention, the Lunar Water Resource Demonstration (LWRD) supports the objectives of the RESOLVE project by capturing and quantifying water and hydrogen released by regolith upon heating. Field test results for the quantification of water using LWRD showed that the volcanic ash (tephra) samples contained 0.15-0.41% water, in agreement with GC water measurements. Reduction of the RH in the surge tank to near zero during recirculation show that the water is captured by the water beds as desired. The water can be recovered by heating the Water Beds to 230 C or higher. Test results for the capture and quantification of pure hydrogen have shown that over 90% of the hydrogen can be captured and 98% of the absorbed hydrogen can be recovered upon heating the hydride to 400 C and desorbing the hydrogen several times into the evacuated surge tank. Thus, the essential requirement of capturing hydrogen and recovering it has been demonstrated. ,

  2. Field Lysimeter Test Facility: Second year (FY 1989) test results

    SciTech Connect

    Campbell, M.D.; Gee, G.W.; Kanyid, M.J.; Rockhold, M.L.

    1990-04-01

    The Record of Decision associated with the Hanford Defense Waste Environmental Impact Statement (53 FR 12449-53) commits to an evaluation of the use of protective barriers placed over near-surface wastes. The barrier must protect against wind and water erosion and limit plant and animal intrusion and infiltration of water. Successful conclusion of this program will yield the necessary protective barrier design for near-surface waste isolation. This report presents results from the second year of tests at the FLTF. The primary objective of testing protective barriers at the FLTF was to measure the water budgets within the various barriers and assess the effectiveness of their designs in limiting water intrusion into the zone beneath each barrier. Information obtained from these measurements is intended for use in refining barrier designs. Four elements of water budget were measured during the year: precipitation, evaporation, storage, and drainage. Run-off, which is a fifth element of a complete water budget, was made negligible by a lip on the lysimeters that protrudes 5 cm above the soil surface to prevent run-off. A secondary objective of testing protective barriers at the FLTF was to refine procedures and equipment to support data collection for verification of the computer model needed for long-term projections of barrier performance. 6 refs.

  3. Full length prototype SSC dipole test results

    SciTech Connect

    Strait, J.; Brown, B.C.; Carson, J.; Engler, N.; Fisk, H.E.; Hanft, R.; Koepke, K.; Kuchnir, M.; Larson, E.; Lundy, R.

    1987-04-24

    Results are presented from tests of the first full length prototype SSC dipole magnet. The cryogenic behavior of the magnet during a slow cooldown to 4.5K and a slow warmup to room temperature has been measured. Magnetic field quality was measured at currents up to 2000 A. Averaged over the body field all harmonics with the exception of b/sub 2/ and b/sub 8/ are at or within the tolerances specified by the SSC Central Design Group. (The values of b/sub 2/ and b/sub 8/ result from known design and construction defects which will be be corrected in later magnets.) Using an NMR probe the average body field strength is measured to be 10.283 G/A with point to point variations on the order of one part in 1000. Data are presented on quench behavior of the magnet up to 3500 A (approximately 55% of full field) including longitudinal and transverse velocities for the first 250 msec of the quench.

  4. Karhula hot gas cleanup test results

    SciTech Connect

    Lippert, T.E.; Bruck, G.J.; Isaksson, J.

    1994-10-01

    The objective of this work is to develop a practical hot gas filter design that meets the performance and operational requirements of pressurized fluidized bed combustion--bubbling bed, circulating bed and second generation--applications. The Westinghouse hot gas candle filter system is currently installed in the Ahlstrom Pyropower 10 MW (thermal) pressurized circulating fluidized bed combustor (PCFB) test facility located in Karhula, Finland. The overall objective of the testing is to evaluate the filter design and operating reliability for selection and implementation into the Midwest Power DMEC-1 PCFB 150 MW(e) repowering project (Clean Coal III Selection). During 1,026 hours of operation represented by Test Segment 2 and current testing in Test Segment 3, the filter unit and test facility has performed very well and operated without major equipment failures. The filter has demonstrated stable pressure drop and has operated without candle failure. Tables summarize the filter operating parameters during these tests.

  5. Screening for chromosomal abnormalities using combined test in the first trimester of pregnancy

    PubMed Central

    Park, Soo Yeon; Jang, In Ae; Lee, Min Ah; Kim, Young Ju; Chun, Sun Hee

    2016-01-01

    Objective This study was designed to review the screening performance of combined test at the Ewha Womans University Mokdong hospital. Methods All women admitted for routine antenatal care between January 1st 2008 and December 31st 2012 with a known pregnancy outcome were included in this study, totaling 1,156 women with singleton pregnancies presenting at 10 to 13 weeks of gestation. Women were offered screening using a combination of maternal serum pregnancy-associated plasma protein-A, free β-human chorionic gonadotropin and fetal nuchal translucency thickness. Those with an estimated risk of ≥1 in 250 of carrying a fetus with trisomy 21 or ≥1 in 300 risk of trisomy 18 were offered genetic counseling with the option of an invasive diagnostic test. Results The median of gestational age was 11+3 weeks, the median of crown-rump length was 47.1 mm, and the median age of the women was 31 years. The detection rate was 80% for trisomy 21 (4 of 5) and 100% for trisomy 13 and 18 (all 2). The false-positive rate was 7.73% for trisomy 21 and 1.21% for trisomy 18. Conclusion This study was the first large population study performed with the aim of analyzing the performance of the combined test in Korea. This study demonstrated that the detection rates and other figures of the first trimester combined test are comparable to the results reported in other papers worldwide. Consequently, if strict conditions for good screening outcomes are achieved, the first trimester combined test might well be the earliest detectable screening, improving detection rates without increasing karyotyping or economic and other implications that inevitably ensue. PMID:27668198

  6. Screening for chromosomal abnormalities using combined test in the first trimester of pregnancy

    PubMed Central

    Park, Soo Yeon; Jang, In Ae; Lee, Min Ah; Kim, Young Ju; Chun, Sun Hee

    2016-01-01

    Objective This study was designed to review the screening performance of combined test at the Ewha Womans University Mokdong hospital. Methods All women admitted for routine antenatal care between January 1st 2008 and December 31st 2012 with a known pregnancy outcome were included in this study, totaling 1,156 women with singleton pregnancies presenting at 10 to 13 weeks of gestation. Women were offered screening using a combination of maternal serum pregnancy-associated plasma protein-A, free β-human chorionic gonadotropin and fetal nuchal translucency thickness. Those with an estimated risk of ≥1 in 250 of carrying a fetus with trisomy 21 or ≥1 in 300 risk of trisomy 18 were offered genetic counseling with the option of an invasive diagnostic test. Results The median of gestational age was 11+3 weeks, the median of crown-rump length was 47.1 mm, and the median age of the women was 31 years. The detection rate was 80% for trisomy 21 (4 of 5) and 100% for trisomy 13 and 18 (all 2). The false-positive rate was 7.73% for trisomy 21 and 1.21% for trisomy 18. Conclusion This study was the first large population study performed with the aim of analyzing the performance of the combined test in Korea. This study demonstrated that the detection rates and other figures of the first trimester combined test are comparable to the results reported in other papers worldwide. Consequently, if strict conditions for good screening outcomes are achieved, the first trimester combined test might well be the earliest detectable screening, improving detection rates without increasing karyotyping or economic and other implications that inevitably ensue.

  7. Summary of CPAS EDU Testing Analysis Results

    NASA Technical Reports Server (NTRS)

    Romero, Leah M.; Bledsoe, Kristin J.; Davidson, John.; Engert, Meagan E.; Fraire, Usbaldo, Jr.; Galaviz, Fernando S.; Galvin, Patrick J.; Ray, Eric S.; Varela, Jose

    2015-01-01

    The Orion program's Capsule Parachute Assembly System (CPAS) project is currently conducting its third generation of testing, the Engineering Development Unit (EDU) series. This series utilizes two test articles, a dart-shaped Parachute Compartment Drop Test Vehicle (PCDTV) and capsule-shaped Parachute Test Vehicle (PTV), both of which include a full size, flight-like parachute system and require a pallet delivery system for aircraft extraction. To date, 15 tests have been completed, including six with PCDTVs and nine with PTVs. Two of the PTV tests included the Forward Bay Cover (FBC) provided by Lockheed Martin. Advancements in modeling techniques applicable to parachute fly-out, vehicle rate of descent, torque, and load train, also occurred during the EDU testing series. An upgrade from a composite to an independent parachute simulation allowed parachute modeling at a higher level of fidelity than during previous generations. The complexity of separating the test vehicles from their pallet delivery systems necessitated the use the Automatic Dynamic Analysis of Mechanical Systems (ADAMS) simulator for modeling mated vehicle aircraft extraction and separation. This paper gives an overview of each EDU test and summarizes the development of CPAS analysis tools and techniques during EDU testing.

  8. Analyzing Educational Testing Service Graduate Major Field Test Results

    ERIC Educational Resources Information Center

    Thornton, Barry; Arbogast, Gordon

    2012-01-01

    The Educational Testing Service (ETS) created the Graduate Major Field Test in Business (GMFT-B) for MBA students. This test is administered to all MBA classes at Jacksonville University for the purpose of measuring student academic achievement and growth, as well as to assess educational outcomes. The test is given in the capstone course,…

  9. Abnormal TREC-Based Newborn Screening Test in a Premature Neonate with Massive Perivillous Fibrin Deposition of the Placenta

    PubMed Central

    Kostadinov, Stefan; Robbins, Karen A.; Hayward, Anthony

    2016-01-01

    Severe combined immunodeficiency (SCID), a primary immunodeficiency arising from variable defects in lymphocyte development and survival, is characterized by significant deficiency of thymus derived (T-) lymphocytes and variable defects in the B-lymphocyte population. Newborn screening for SCID is based on detection of low numbers of T-cell receptor excision circles (TRECs) by real time quantitative PCR (RT-qPCR). This screening allows for early identification of individuals with SCID and other disorders characterized by T-lymphopenia. Higher rates of abnormal screens are commonly seen in premature and critically ill neonates, often representing false positives. It is possible that many abnormal screens seen in these populations are result of conditions that are characterized by systemic inflammation or stress, possibly in the context of stress-induced thymic involution. We present a case of a male infant delivered at 27 weeks, 6 days of gestation, with severe intrauterine growth restriction who had an abnormal TREC screen and a massive perivillous fibrin deposition (MPFD) of the placenta. This association has not been reported previously. We are raising the awareness to the fact that conditions, such as MPFD, that can create adverse intrauterine environment are capable of causing severe stress-induced thymic involution of the fetus which can present with abnormal TREC results on newborn screening. PMID:27403355

  10. Abnormal TREC-Based Newborn Screening Test in a Premature Neonate with Massive Perivillous Fibrin Deposition of the Placenta.

    PubMed

    Kostadinov, Stefan; Robbins, Karen A; Hayward, Anthony

    2016-01-01

    Severe combined immunodeficiency (SCID), a primary immunodeficiency arising from variable defects in lymphocyte development and survival, is characterized by significant deficiency of thymus derived (T-) lymphocytes and variable defects in the B-lymphocyte population. Newborn screening for SCID is based on detection of low numbers of T-cell receptor excision circles (TRECs) by real time quantitative PCR (RT-qPCR). This screening allows for early identification of individuals with SCID and other disorders characterized by T-lymphopenia. Higher rates of abnormal screens are commonly seen in premature and critically ill neonates, often representing false positives. It is possible that many abnormal screens seen in these populations are result of conditions that are characterized by systemic inflammation or stress, possibly in the context of stress-induced thymic involution. We present a case of a male infant delivered at 27 weeks, 6 days of gestation, with severe intrauterine growth restriction who had an abnormal TREC screen and a massive perivillous fibrin deposition (MPFD) of the placenta. This association has not been reported previously. We are raising the awareness to the fact that conditions, such as MPFD, that can create adverse intrauterine environment are capable of causing severe stress-induced thymic involution of the fetus which can present with abnormal TREC results on newborn screening. PMID:27403355

  11. Power Actuation and Switching Module Test Results

    NASA Technical Reports Server (NTRS)

    Carr, Greg; Deligiannis, Frank; Franco, Lauro; Jones, Loren; Lam, Barbara; Nelson, Ron; Pantaleon, Jose; Ruiz, Ian; Treichler, John; Wester, Gene

    2006-01-01

    The X2000 Power System Electronics (PSE) is a Jet Propulsion Laboratory (JPL) task to develop a new generation of power system building blocks for use on future deep-space missions. The effort includes the development of electronic components and modules that can be used as building blocks in the design of generic spacecraft power systems. All X2000 avionics components and modules are designed for use in centralized or distributed spacecraft architectures. The Power Actuation and Switching Module (PASM) has been developed under the X2000 program. This component enables a modular and scalable design approach for power switching applications, which can result in a wide variety of power switching architectures using this simple building block. The PASM is designed to provide most of the necessary power switching functions of spacecraft for various Deep Space missions including future missions to Mars, comets, Jupiter and its moons. It is fabricated using an ASIC process that is tolerant of high radiation. The development included two application specific integrated circuits (ASICs) and support circuitry all packaged using High Density Interconnect (HDI) technology. It can be operated in series or parallel with other PASMs. It can be used as a high-side or low-side switch and it can drive thruster valves, pyrotechnic devices such as NASA standard initiators, bus shunt resistors, and regular spacecraft component loads. Each PASM contains two independent switches with internal current limiting and over-current trip-off functions to protect the power subsystem from load faults. During turnon and turnoff each switch can limit the rate of current change (di/dt) to a value determined by the user. Three-way majority-voted On/Off commandability and full switch status telemetry (both analog and digital) are built into the module. This paper is a follow up to the one presented at he IECEC 2004 conference that will include the lessons learned and test results from the development.

  12. Honeycomb spacer crush stength test results

    SciTech Connect

    Leader, D.R.

    1993-09-15

    This report discusses aluminum honeycomb spacers, which are used as an energy absorbent material in shipping packages for off site shipment of radioactive materials and which were ordered in two crush strengths, 1,000 psi and 2,000 psi for use in drop tests requested by the Packaging and Transportation group as part of the shipping container rectification process. Both the group as part of the shipping container rectification process. Both the vendor and the SRTC Materials Laboratory performed crush strength measurements on test samples made from the material used to fabricate the actual spacers. The measurements of crush strength made in the SRTC Materials Laboratory are within 100 psi of the measurements made by the manufacturer for all samples tested and all test measurements are within 10% of the specified crush strength, which is acceptable to the P&T group for the planned tests.

  13. Standardized fluorescence in situ hybridization testing based on an appropriate panel of probes more effectively identifies common cytogenetic abnormalities in myelodysplastic syndromes than conventional cytogenetic analysis: a multicenter prospective study of 2302 patients in China.

    PubMed

    Lai, Yue-Yun; Huang, Xiao-Jun; Li, Juan; Zou, Ping; Xu, Ze-Feng; Sun, Hui; Shao, Zong-Hong; Zhou, Dao-Bin; Chen, Fang-Ping; Liu, Zhuo-Gang; Zhu, Huan-Ling; Wu, De-Pei; Wang, Chun; Zhang, Yin; Li, Yan; Hou, Ming; Du, Xin; Wang, Xin; Li, Wei; Lai, Yong-Rong; Zhou, Jin; Zhou, Yu-Hong; Fang, Mei-Yun; Qiu, Lin; Wang, Xiao-Min; Zhang, Guang-Sen; Jiang, Ming; Liang, Ying-Min; Zhang, Lian-Sheng; Chen, Xie-Qun; Bai, Hai; Lin, Jin-Ying

    2015-05-01

    In an attempt to establish the advantages of fluorescence in situ hybridization (FISH) studies over conventional cytogenetic (CC) analysis, a total of 2302 de novo MDS patients from 31 Chinese institutions were prospectively selected in the present study for both CC and standardized FISH analysis for +8, -7/7q-, -5/5q-, 20q- and-Y chromosomal abnormalities. CC analysis was successful in 94.0% of the patients; of these patients, 35.9% of the cases were abnormal. FISH analysis was successful in all 2302 patients and detected at least one type of common cytogenetic abnormality in 42.7% of the cases. The incidences of +8, -7/7q-, -5/5q-, 20q- and-Y chromosomal abnormalities by FISH were 4.1% to 8.7% higher than those by CC. FISH identified abnormalities in 23.6% of the patients exhibiting normal CC results and revealed that 20.7% of the patients with adequate normal metaphases (≥20) had abnormal clones. FISH identified cytogenetic abnormalities in 50.4% of the patients with failed CC analysis. In summary, our multicenter studies emphasised and confirmed the importance of applying standardized FISH testing based on an appropriate panel of probes to detect common cytogenetic abnormalities in Chinese de novo MDS patients, particularly those with normal or failed CC results.

  14. What Do the Results of Genetic Tests Mean?

    MedlinePlus

    ... genetic tests mean? What do the results of genetic tests mean? The results of genetic tests are ... type of result. For more information about interpreting genetic test results: The National Cancer Institute fact sheet ...

  15. MHD air preheaters: Results of thermomechanical tests

    SciTech Connect

    Valente, T. )

    1994-12-01

    The thermomechanical tests conducted on four different high-purity periclase magnesia-fired brick were used to select suitable refractory material for the design of a regenerative heat exchanger (Cowper type) for an open-cycle indirect preheating, MHD pilot plant. Tests were conducted under the most severe temperature condition allowable in standard test equipment. The choice among the refractories were made supposing that the ranking established with these tests does not change for higher temperatures (up to 1,900 C). Refractory material M1 exhibited the best behavior. The reported values can be used for the preliminary design of the heat exchanger, using the appropriate safety coefficient. The effective behavior of the materials can be completely understood only with experimental data obtained by the effective operation condition, because size and shape of the material strongly affect the service behavior. The best test is a pilot plant, using scaled-down criteria. This will overcome the difficulty of the standard test at 1,900 C, caused by test equipment limitations.

  16. 75 FR 32484 - Array-Based Cytogenetic Tests: Questions on Performance Evaluation, Result Reporting and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-08

    ... hybridization (FISH) provide the information about chromosome abnormalities at specific loci. The recent... copy number alterations associated with chromosome abnormalities. Array-based cytogenetic testing is... anomalies, dysmorphic features, developmental disabilities, etc. Traditionally, chromosomes were...

  17. Notification following new positive HIV test results.

    PubMed

    Huang, Ya-Lin A; Hutchinson, Angela B; Hollis, NaTasha D; Sansom, Stephanie L

    2016-09-01

    Client notification of a new HIV diagnosis is critical for timely access to treatment and reduction in behaviours associated with HIV infection. It is also an important input in HIV transmission and disease progression models. We used national, Centers for Disease Control and Prevention-funded HIV testing events data collected through the National HIV Prevention Program Monitoring and Evaluation system to update estimates of the proportion of newly identified HIV-positives notified of their status. We compared estimates from 2008 to 2010 across test technologies, settings, and HIV risk groups. In 2010, notification following a positive rapid test was 99.6% compared with 99.3% in 2008. Notification following a positive conventional test was 81.5% in 2010 compared with 80.8% in 2008. To realise the full promise of early HIV diagnosis and treatment for the prevention of additional HIV cases, efforts to ensure prompt notification following a new HIV diagnosis will be crucial. PMID:26378191

  18. X-48B Preliminary Flight Test Results

    NASA Technical Reports Server (NTRS)

    Taylor, Brian R.

    2009-01-01

    This slide presentation reviews the preliminary Flight tests of the X-48B development program. The X-48B is a blended wing body aircraft that is being used to test various features of the BWB concept. The research concerns the following: (1) Turbofan Development, (2) Intelligent Flight Control and Optimization, (3) Airdata Calibration (4) Parameter Identification (i.e., Determination of the parameters of a mathematical model of a system based on observation of the system inputs and response.)

  19. Abnormal Resting-State Functional Connectivity in Patients with Chronic Fatigue Syndrome: Results of Seed and Data-Driven Analyses.

    PubMed

    Gay, Charles W; Robinson, Michael E; Lai, Song; O'Shea, Andrew; Craggs, Jason G; Price, Donald D; Staud, Roland

    2016-02-01

    Although altered resting-state functional connectivity (FC) is a characteristic of many chronic pain conditions, it has not yet been evaluated in patients with chronic fatigue. Our objective was to investigate the association between fatigue and altered resting-state FC in myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). Thirty-six female subjects, 19 ME/CFS and 17 healthy controls, completed a fatigue inventory before undergoing functional magnetic resonance imaging. Two methods, (1) data driven and (2) model based, were used to estimate and compare the intraregional FC between both groups during the resting state (RS). The first approach using independent component analysis was applied to investigate five RS networks: the default mode network, salience network (SN), left frontoparietal networks (LFPN) and right frontoparietal networks, and the sensory motor network (SMN). The second approach used a priori selected seed regions demonstrating abnormal regional cerebral blood flow (rCBF) in ME/CFS patients at rest. In ME/CFS patients, Method-1 identified decreased intrinsic connectivity among regions within the LFPN. Furthermore, the FC of the left anterior midcingulate with the SMN and the connectivity of the left posterior cingulate cortex with the SN were significantly decreased. For Method-2, five distinct clusters within the right parahippocampus and occipital lobes, demonstrating significant rCBF reductions in ME/CFS patients, were used as seeds. The parahippocampal seed and three occipital lobe seeds showed altered FC with other brain regions. The degree of abnormal connectivity correlated with the level of self-reported fatigue. Our results confirm altered RS FC in patients with ME/CFS, which was significantly correlated with the severity of their chronic fatigue.

  20. Knockdown of zebrafish Lgi1a results in abnormal development, brain defects and a seizure-like behavioral phenotype

    PubMed Central

    Teng, Yong; Xie, Xiayang; Walker, Steven; Rempala, Grzegorz; Kozlowski, David J.; Mumm, Jeff S.; Cowell, John K.

    2010-01-01

    Epilepsy is a common disorder, typified by recurrent seizures with underlying neurological disorders or disease. Approximately one-third of patients are unresponsive to currently available therapies. Thus, a deeper understanding of the genetics and etiology of epilepsy is needed to advance the development of new therapies. Previously, treatment of zebrafish with epilepsy-inducing pharmacological agents was shown to result in a seizure-like phenotype, suggesting that fish provide a tractable model to understand the function of epilepsy-predisposing genes. Here, we report the first model of genetically linked epilepsy in zebrafish and provide an initial characterization of the behavioral and neurological phenotypes associated with morpholino (MO) knockdown of leucine-rich, glioma-inactivated 1a (lgi1a) expression. Mutations in the LGI1 gene in humans have been shown to predispose to a subtype of autosomal dominant epilepsy. Low-dose Lgi1a MO knockdown fish (morphants) appear morphologically normal but are sensitized to epilepsy-inducing drugs. High-dose Lgi1a morphants have morphological defects which persist into adult stages that are typified by smaller brains and eyes and abnormalities in tail shape, and display hyperactive swimming behaviors. Increased apoptosis was observed throughout the central nervous system of high-dose morphant fish, accounting for the size reduction of neural tissues. These observations demonstrate that zebrafish can be exploited to dissect the embryonic function(s) of genes known to predispose to seizure-like behavior in humans, and offer potential insight into the relationship between developmental neurobiological abnormalities and seizure. PMID:20819949

  1. Results from Grimethorpe PFBC turbine cascade tests

    SciTech Connect

    Not Available

    1986-12-01

    The test program at the Grimethorpe Pressurized Fluidized-Bed Combustion (PFBC) facility included an assessment of the potential for deposition, corrosion, and erosion of gas turbine blade materials when exposed to PFBC off gases. Flue gas from the combustor was fed through three stages of cyclones before entering the cascade. The impulse foils were approximately the size and shape of the first stage blades in the GE MS-1002 gas turbine. The cascade operated through three test series, accumulating a total of 649 hours. The conditions experienced are summarized. The paper lists the alloys tested, and discusses the efficiency of the cyclones, the particle size distribution of the dusts not removed by the cyclones, and corrosion of the turbine blades. 4 references, 1 figure, 2 tables.

  2. Cryogenic optical testing results of JWST aspheric test plate lens

    NASA Astrophysics Data System (ADS)

    Smith, Koby Z.; Towell, Timothy C.

    2011-09-01

    The James Webb Space Telescope (JWST) Secondary Mirror Assembly (SMA) is a circular 740mm diameter beryllium convex hyperboloid that has a 23.5nm-RMS (λ/27 RMS) on-orbit surface figure error requirement. The radius of curvature of the SMA is 1778.913mm+/-0.45mm and has a conic constant of -1.6598+/-0.0005. The on-orbit operating temperature of the JWST SMA is 22.5K. Ball Aerospace & Technologies Corp. (BATC) is under contract to Northrop Grumman Aerospace Systems (NGAS) to fabricate, assemble, and test the JWST SMA to its on-orbit requirements including the optical testing of the SMA at its cryogenic operating temperature. BATC has fabricated and tested an Aspheric Test Plate Lens (ATPL) that is an 870mm diameter fused silica lens used as the Fizeau optical reference in the ambient and cryogenic optical testing of the JWST Secondary Mirror Assembly (SMA). As the optical reference for the SMA optical test, the concave optical surface of the ATPL is required to be verified at the same 20K temperature range required for the SMA. In order to meet this objective, a state-of-the-art helium cryogenic testing facility was developed to support the optical testing requirements of a number of the JWST optical testing needs, including the ATPL and SMA. With the implementation of this cryogenic testing facility, the ATPL was successfully cryogenically tested and performed to less than 10nm-RMS (λ/63 RMS) surface figure uncertainty levels for proper reference backout during the SMA optical testing program.

  3. Liquid Motion Experiment Flight Test Results

    NASA Technical Reports Server (NTRS)

    Chato David J.; Dalton, Penni J.; Dodge, Franklin T.; Green, Steve

    1998-01-01

    The Liquid Motion Experiment (LME), designed to study the effects of liquid motion in rotating tanks, was flown on STS 84. LME was essentially a spin table that created a realistic nutation motion of scale-model tanks containing liquid. TWo spherical and two cylindrical transparent tanks were tested simultaneously, and three sets of such tanks were employed to vary liquid viscosity, fill level, and propellant management device (PMD) design. All the tanks were approximately 4.5 inches diameter. The primary test measurements were the radial and tangential torques exerted on the tanks by the liquid. Resonant frequencies and damping of the liquid oscillations were determined by sine sweep tests. For a given tank shape, the resonant frequency depended on fill level. For the cylindrical tanks, the resonances had somewhat different frequencies for the tangential axis (0.55 to 0.75 times spin rate) and the radial axis (0.73 to 0.78 times spin rate), and the tangential axis resonance agreed more closely with available analytical models. For the spherical tanks, the resonant frequencies were between 0.74 to 0.77 times the spin rate and were the same for the tangential and radial axes. The damping coefficients varied from about I% to 3% of critical, depending on tank shape, fill level, and liquid viscosity. 'Me viscous energy dissipation rates of the liquid oscillations were determined from sine dwell tests. The LME energy dissipation rates varied from 0.3 to 0.5 times the estimates obtained from scaling previous ground tests and spacecraft flight data. The PNDs sometimes enhanced the resonances and energy dissipation rates and sometimes decreased them, which points out the need to understand better the effects of PMD on liquid motion as a function of PMD and tank design.

  4. Respiratory symptoms in rheumatoid arthritis: relation to pulmonary abnormalities detected by high-resolution CT and pulmonary functional testing.

    PubMed

    Youssef, Amir A; Machaly, Shereen A; El-Dosoky, Mohammed E; El-Maghraby, Nermeen M

    2012-07-01

    Pulmonary disease is the most frequent and among the most severe extra-articular manifestation of rheumatoid arthritis (RA). However, this issue has not been sufficiently studied in Egyptian patients. The objectives of the present study are to investigate the prevalence and types of pulmonary involvement using high-resolution computed tomography scan (HRCT) and pulmonary function tests (PFT) and evaluate the association between respiratory symptoms and RA-lung disease in a group of Egyptian RA patients. Thirty-six RA patients were recruited; 34 females (94.4%) and 2 males (5.6%) with median age of 48.5 years, and none of them was smoker. Detailed medical and drug histories were obtained. PFT, plain X-ray of the chest, and HRCT were performed to all subjects involved. Nearly 64% of RA patients demonstrated abnormalities in PFT and 47% in HRCT. Mixed restrictive and obstructive pattern was the commonest. Nearly two-thirds of our patients reported one or more pulmonary symptom whether dyspnea, cough, wheezing, or phlegm. Dyspnea was the most frequent symptom. Respiratory symptoms were statistically more common in patients with lung disease. The advanced age, high radiological score, and severity of rheumatoid disease were found to be predictive of lung involvement. Among respiratory symptoms, dyspnea and cough were associated with any pulmonary abnormalities. When specific pulmonary abnormalities were considered, only dyspnea was identified as predictor for restriction. For obstructive abnormality, both cough and wheezing provided valid prediction. We conclude that pulmonary involvement is a common manifestation in Egyptian RA patients, and the pattern of involvement is generally consistent with other studies that were performed worldwide. Specific respiratory symptoms could be used as practical, easy, and cost-effective method, especially in older and with more severe RA patients, to discriminate patients in need of subsequent PFT and HRCT imaging.

  5. Conical isogrid adapter structural test results

    NASA Technical Reports Server (NTRS)

    Dyer, J. E.; Slysh, P.

    1974-01-01

    The structural characteristics of isogrid composite structures are discussed. To demonstrate the feasibility of applying isogrid to conical structures, a full scale flanged isogrid conical adapter similar to the configuration of the D-1 Centaur equipment module was constructed. The adapter was tested to evaluate the response of the conical isogrid structure to various combinations of bending and axial compression loading. The analysis techniques for predicting conical isogrid structural capability are examined.

  6. Preliminary Results of Field Emission Cathode Tests

    NASA Technical Reports Server (NTRS)

    Sovey, James S.; Kovaleski, Scott D.

    2001-01-01

    Preliminary screening tests of field emission cathodes such as chemical vapor deposited (CVD) diamond, textured pyrolytic graphite, and textured copper were conducted at background pressures typical of electric thruster test facilities to assess cathode performance and stability. Very low power electric thrusters which provide tens to hundreds micronewtons of thrust may need field emission neutralizers that have a capability of tens to hundreds of microamperes. From current voltage characteristics, it was found that the CVD diamond and textured metals cathodes clearly satisfied the Fowler-Nordheim emission relation. The CVD diamond and a textured copper cathode had average current densities of 270 and 380 mA/sq cm, respectively, at the beginning-of-life. After a few hours of operation the cathode emission currents degraded by 40 to 75% at background pressures in the 10(exp -5) Pa to 10(exp -4) Pa range. The textured pyrolytic graphite had a modest current density at beginning-of-life of 84 mA/sq cm, but this cathode was the most stable of all. Extended testing of the most promising cathodes is warranted to determine if current degradation is a burn-in effect or whether it is a long-term degradation process. Preliminary experiments with ferroelectric emission cathodes, which are ceramics with spontaneous electric polarization, were conducted. Peak current densities of 30 to 120 mA/sq cm were obtained for pulse durations of about 500 ns in the 10(exp -4) Pa pressure range.

  7. Combination of physico-chemical analysis, Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay/nuclear abnormalities tests for cyto-genotoxicity assessments of treated effluents discharged from textile industries.

    PubMed

    Hemachandra, Chamini K; Pathiratne, Asoka

    2016-09-01

    Bioassays for cyto-genotoxicity assessments are generally not required in current textile industry effluent discharge management regulations. The present study applied in vivo plant and fish based toxicity tests viz. Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay and nuclear abnormalities tests in combination with physico-chemical analysis for assessing potential cytotoxic/genotoxic impacts of treated textile industry effluents reaching a major river (Kelani River) in Sri Lanka. Of the treated effluents tested from two textile industries, color in the Textile industry 1 effluents occasionally and color, biochemical oxygen demand and chemical oxygen demand in the Textile industry 2 effluents frequently exceeded the specified Sri Lankan tolerance limits for discharge of industrial effluents into inland surface waters. Exposure of A. cepa bulbs to 100% and 12.5% treated effluents from both industries resulted in statistically significant root growth retardation, mito-depression, and induction of chromosomal abnormalities in root meristematic cells in comparison to the dilution water in all cases demonstrating cyto-genotoxicity associated with the treated effluents. Exposure of O. niloticus to the 100% and 12.5% effluents, resulted in erythrocytic genetic damage as shown by elevated total comet scores and induction of nuclear abnormalities confirming the genotoxicity of the treated effluents even with 1:8 dilution. The results provide strong scientific evidence for the crucial necessity of incorporating cyto-genotoxicity impact assessment tools in textile industry effluent management regulations considering human health and ecological health of the receiving water course under chronic exposure.

  8. A risk score for predicting coronary artery disease in women with angina pectoris and abnormal stress test finding.

    PubMed

    Lo, Monica Y; Bonthala, Nirupama; Holper, Elizabeth M; Banks, Kamakki; Murphy, Sabina A; McGuire, Darren K; de Lemos, James A; Khera, Amit

    2013-03-15

    Women with angina pectoris and abnormal stress test findings commonly have no epicardial coronary artery disease (CAD) at catheterization. The aim of the present study was to develop a risk score to predict obstructive CAD in such patients. Data were analyzed from 337 consecutive women with angina pectoris and abnormal stress test findings who underwent cardiac catheterization at our center from 2003 to 2007. Forward selection multivariate logistic regression analysis was used to identify the independent predictors of CAD, defined by ≥50% diameter stenosis in ≥1 epicardial coronary artery. The independent predictors included age ≥55 years (odds ratio 2.3, 95% confidence interval 1.3 to 4.0), body mass index <30 kg/m(2) (odds ratio 1.9, 95% confidence interval 1.1 to 3.1), smoking (odds ratio 2.6, 95% confidence interval 1.4 to 4.8), low high-density lipoprotein cholesterol (odds ratio 2.9, 95% confidence interval 1.5 to 5.5), family history of premature CAD (odds ratio 2.4, 95% confidence interval 1.0 to 5.7), lateral abnormality on stress imaging (odds ratio 2.8, 95% confidence interval 1.5 to 5.5), and exercise capacity <5 metabolic equivalents (odds ratio 2.4, 95% confidence interval 1.1 to 5.6). Assigning each variable 1 point summed to constitute a risk score, a graded association between the score and prevalent CAD (ptrend <0.001). The risk score demonstrated good discrimination with a cross-validated c-statistic of 0.745 (95% confidence interval 0.70 to 0.79), and an optimized cutpoint of a score of ≤2 included 62% of the subjects and had a negative predictive value of 80%. In conclusion, a simple clinical risk score of 7 characteristics can help differentiate those more or less likely to have CAD among women with angina pectoris and abnormal stress test findings. This tool, if validated, could help to guide testing strategies in women with angina pectoris.

  9. 49 CFR 236.110 - Results of tests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Results of tests. 236.110 Section 236.110...: All Systems Inspections and Tests; All Systems § 236.110 Results of tests. (a) Results of tests made... records must show the name of the railroad, place and date, equipment tested, results of tests,...

  10. 49 CFR 236.110 - Results of tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Results of tests. 236.110 Section 236.110...: All Systems Inspections and Tests; All Systems § 236.110 Results of tests. (a) Results of tests made... records must show the name of the railroad, place and date, equipment tested, results of tests,...

  11. 49 CFR 236.110 - Results of tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Results of tests. 236.110 Section 236.110...: All Systems Inspections and Tests; All Systems § 236.110 Results of tests. (a) Results of tests made... records must show the name of the railroad, place and date, equipment tested, results of tests,...

  12. 49 CFR 236.110 - Results of tests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Results of tests. 236.110 Section 236.110...: All Systems Inspections and Tests; All Systems § 236.110 Results of tests. (a) Results of tests made... records must show the name of the railroad, place and date, equipment tested, results of tests,...

  13. 49 CFR 236.110 - Results of tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Results of tests. 236.110 Section 236.110...: All Systems Inspections and Tests; All Systems § 236.110 Results of tests. (a) Results of tests made... records must show the name of the railroad, place and date, equipment tested, results of tests,...

  14. Test results for robotic manipulator EMMA

    SciTech Connect

    Ramsower, D.C.

    1996-07-30

    Testing was performed at the National Institute of Standards and Technology (NIST) headquarters in Gaithersburg, Maryland, where Grey Pilgrim has experimental space available under a Cooperative R & D Agreement (CRADA) with NIST. Under the CRADA, Grey Pilgrim is tasked with developing a version of EMMA suitable for deployment of a stereo camera on a NIST RoboCrane, a mobile platform with applications to several industrial environments (including hazardous materials) based on the concept of the Steward Platform, a structure with great strength and a minimum of material.

  15. The 757 NLF glove flight test results

    NASA Technical Reports Server (NTRS)

    Runyan, L. Jim; Bielak, G. W.; Behbehani, R. A.; Chen, A. W.; Rozendaal, Roger A.

    1987-01-01

    A major concern in the application of a laminar flow wing design to commercial transports is whether laminar flow can be sustained in the presence of the noise environment due to wing mounted turbofan engines. To investigate this issue, a flight test program was conducted using the Boeing 757 flight research airplane with a portion of the wing modified to obtain natural laminar flow. The flight test had two primary objectives. The first was to measure the noise levels on the upper and lower surface of the wing for a range of flight conditions. The second was to investigate the effect of engine noise on laminar boundary layer transition. The noise field on the wing and transition location on the glove were then measured as a function of the engine power setting at a given flight condition. The transition and noise measurement on the glove show that there is no apparent effect of engine noise on the upper surface transition location. On the lower surface, the transition location moved forward 2 to 3 percent chord. A boundary layer stability analysis to the flight data showed that cross flow disturbances were the dominant cause of transition at most flight conditions.

  16. Structural, Metabolic, and Functional Brain Abnormalities as a Result of Prenatal Exposure to Drugs of Abuse: Evidence from Neuroimaging

    PubMed Central

    Roussotte, Florence; Soderberg, Lindsay

    2010-01-01

    Prenatal exposure to alcohol and stimulants negatively affects the developing trajectory of the central nervous system in many ways. Recent advances in neuroimaging methods have allowed researchers to study the structural, metabolic, and functional abnormalities resulting from prenatal exposure to drugs of abuse in living human subjects. Here we review the neuroimaging literature of prenatal exposure to alcohol, cocaine, and methamphetamine. Neuroimaging studies of prenatal alcohol exposure have reported differences in the structure and metabolism of many brain systems, including in frontal, parietal, and temporal regions, in the cerebellum and basal ganglia, as well as in the white matter tracts that connect these brain regions. Functional imaging studies have identified significant differences in brain activation related to various cognitive domains as a result of prenatal alcohol exposure. The published literature of prenatal exposure to cocaine and methamphetamine is much smaller, but evidence is beginning to emerge suggesting that exposure to stimulant drugs in utero may be particularly toxic to dopamine-rich basal ganglia regions. Although the interpretation of such findings is somewhat limited by the problem of polysubstance abuse and by the difficulty of obtaining precise exposure histories in retrospective studies, such investigations provide important insights into the effects of drugs of abuse on the structure, function, and metabolism of the developing human brain. These insights may ultimately help clinicians develop better diagnostic tools and devise appropriate therapeutic interventions to improve the condition of children with prenatal exposure to drugs of abuse. PMID:20978945

  17. Transcriptional activation by TAL1 and FUS-CHOP proteins expressed in acute malignancies as a result of chromosomal abnormalities.

    PubMed Central

    Sánchez-García, I; Rabbitts, T H

    1994-01-01

    Proteins that appear to participate in transcriptional control of gene expression are increasingly implicated in leukemias and malignant solid tumors. We report here that the N-terminal domains of the proteins TAL1 (ectopically activated in T-cell acute leukemias after chromosomal abnormalities caused by V-D-J recombinase error) (V, variable; D, diversity; J, joining) and FUS-CHOP (a liposarcoma tumor-specific fusion protein that is produced as a result of a chromosomal translocation) can function as transcription activators of specific responsive reporter genes. The result with TAL1 provides evidence that transcriptional activation can be mediated by a gene activated by translocation in T-cell acute leukemias. In the case of the liposarcoma, transactivation by the FUS-CHOP protein occurs because the FUS transcriptional activation domain is added to the DNA-binding CHOP protein normally lacking such activity. Therefore, the association of transcriptional activation and DNA-binding elements is a common consequence in proteins activated or newly created as fusion proteins after chromosomal translocations in acute leukemias and in malignant solid tumors. Images PMID:8058726

  18. Echocardiographic findings and abnormalities in HIV-infected patients: results from a large, prospective, multicenter HIV-heart study

    PubMed Central

    Reinsch, Nico; Kahlert, Philipp; Esser, Stefan; Sundermeyer, Andreas; Neuhaus, Katrin; Brockmeyer, Norbert; Potthoff, Anja; Erbel, Raimund; Buck, Thomas; Neumann, Till

    2011-01-01

    Aims: The aim of the current study was to assess cardiac structure and function as well as cardiac abnormalities in a large patient-population based multicenter study of HIV-infected subjects. Materials and methods: We enrolled 803 HIV-positive adults (83.4% men, mean age: 44.2 ± 10.3 yrs) in this prospective, cross-sectional cohort study. The study protocol included a standardized documentation of patient history, medical treatment and clinical examination. All subjects underwent a standardized transthoracic echocardiographic examination protocol including Doppler and tissue Doppler imaging. Results: Echocardiographic measurements revealed a structural dilatation of the left ventricle in 10.1% of all HIV-infected subjects. Interventricular septum and posterior wall thickness were increased in 18.0% and 11.1%, respectively, with elevated muscle mass in 14.3% male and 19.4% female patients. Of all participants 13.5% exhibited a pathologic contraction characteristic of one or more myocardial segments. Prevalence of systolic and diastolic dysfunction was 34.3% and 48.0%, respectively. However, severe forms of ventricular dysfunction were rare. Conclusions: In conclusion our results demonstrate the relevance of echocardiography in this patient-population in the era of antiretroviral therapy. Above all, left ventricular wall thickness and function should be controlled regularly in HIV-infected subjects. (ClinicalTrials.gov number, NCT01119729). PMID:22254197

  19. Panoramic night vision goggle flight test results

    NASA Astrophysics Data System (ADS)

    Franck, Douglas L.; Geiselman, Eric E.; Craig, Jeffrey L.

    2000-06-01

    The Panoramic Night Vision Goggle (PNVG) has begun operational test and evaluation with its 100-degree horizontal by 40-degree vertical field of view (FOV) on different aircraft and at different locations. Two configurations of the PNVG are being evaluated. The first configuration design (PNVG I) is very low in profile and fits underneath a visor. PNVG I can be retained by the pilot during ejection. This configuration is interchangeable with a day helmet mounted tracker and display through a standard universal connector. The second configuration (PNVG II) resembles the currently fielded 40-degree circular FOV Aviator Night Vision Imaging Systems (ANVIS) and is designed for non-ejection seat aircraft and ground applications. Pilots completed subjective questionnaires after each flight to compare the capability of the 100-degree horizontal by 40-degree vertical PNVG to the 40-degree circular ANVIS across different operational tasks. This paper discusses current findings and pilot feedback from the flight trials objectives of the next phase of the PNVG program are also discussed.

  20. Recent results of the GAINS test flight

    NASA Astrophysics Data System (ADS)

    Girz, C.

    A demonstration flight of the Global Atmosphere-ocean IN-situ System (GAINS) Prototype III balloon is scheduled to occur in early summer 2002. The 18-m diameter PIII superpressure balloon, built by GSSL, Inc., will float a 135-kg payload at 16 km. Performance of the SpectraTM envelope will be assessed over two day-night cycles. The payload consists of line-of-sight communications for transmitting GPS position, and monitored parameters on balloon and payload state and the internal and external thermal environments. Primary termination is by radio command with several independent backup termination systems. Safe operation of the balloon is ensured by an onboard transponder that keeps the balloon under active air traffic control. The balloon is tracked by an aircraft that will record communications from the balloon and instigate termination of the flight. Mobile ground stations positioned at the launch and recovery locations will also be capable of recording and terminating the flight. A suite of trajectory forecast tools has been developed based on radiosondes and winds from numerical weather models. A GPS surface reflection experiment for determining ocean surface winds will be tested on this platform. Physical and electronic integration of the radio and mechanical systems was completed over the last two years. Data and videos from the June flight will be presented.

  1. Airlift recirculation well test results -- Southern sector

    SciTech Connect

    White, R.M.; Hiergesell, R.A.

    1997-08-01

    Chlorinated solvents used in the A and M-Areas at the Savannah River Site (SRS) from 1952--1982 have contaminated the groundwater under the site. A plume of groundwater contaminated with trichloroethylene (TCE) and perchloroethylene (PCE) in the Lost Lake aquifer is moving generally southward with the natural flow of groundwater. To comply with the requirements of the current SCDHEC Part B Permit, a series of wells is being installed to contain and treat the plume. Airlift Recirculation Wells (ARW) are a new and innovative technology with potential for more cost effective implementation than conventional pump and treat systems. Two Airlift Recirculation Wells have been installed and tested to quantify performance parameters needed to locate a line of these wells along the leading edge of the contaminant plume. The wells proved to be very sensitive to proper development, but after this requirement was met, performance was very good. The Zone of Capture has been estimated to be within a radius of 130--160 ft. around the wells. Thus a line of wells spaced at 250 ft. intervals could intercept the contaminant plume. At SSR-012, TCE was stripped from the groundwater at approximately 1.2 lb./day. The longer term effect of the recirculation wells upon the plume and the degree of recirculation within the aquifer itself will require additional data over a longer time period for an accurate review. Data collection is ongoing.

  2. Dynamic testing of hypothalamic-pituitary function in abnormalities of ovulation.

    PubMed

    Jones, G E; Wentz, A C; Rosenwaks, Z; Shoemaker, J

    1977-12-01

    A review of 26 unusual patients indicates that a combined luteinizing hormone-releasing hormone (LRH)-clomiphene test in conjunction with an estrogen provocation test not only was helpful in identifying underlying pathophysiology of anovulation but also proved useful in the clinical management of the patients. Dynamic testing per se does not establish a diagnosis but, in conjunction with history and other laboratory findings, it does make possible further subdivisions of groups of patients who otherwise appear similar, both clinically and from routine laboratory evaluations. It, therefore, tends to pinpoint a lesion and establish the area in which further tests should be made. It is concluded that the value of such investigations will be more evident as gynecologic endocrinology moves into investigation of the supratentorial control of hypothalamic function and as hypothalamic LRH becomes available as a therapeutic agent.

  3. 49 CFR 234.273 - Results of inspections and tests.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Results of inspections and tests. 234.273 Section....273 Results of inspections and tests. (a) Results of inspections and tests made in compliance with.../DOT inventory number, place and date, equipment tested, results of tests, repairs,...

  4. 49 CFR 234.273 - Results of inspections and tests.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Results of inspections and tests. 234.273 Section....273 Results of inspections and tests. (a) Results of inspections and tests made in compliance with.../DOT inventory number, place and date, equipment tested, results of tests, repairs,...

  5. 49 CFR 234.273 - Results of inspections and tests.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Results of inspections and tests. 234.273 Section....273 Results of inspections and tests. (a) Results of inspections and tests made in compliance with.../DOT inventory number, place and date, equipment tested, results of tests, repairs,...

  6. Diagnostic value of fasting capillary glucose, fructosamine and glycosylated haemoglobin in detecting diabetes and other glucose tolerance abnormalities compared to oral glucose tolerance test.

    PubMed

    Herdzik, E; Safranow, K; Ciechanowski, K

    2002-04-01

    New diagnostic criteria for diabetes mellitus recommend lowering of the fasting plasma glucose to 7.0 mmol/l. In contrast to recommendations of the American Diabetes Association (ADA), WHO recommends using the oral glucose tolerance test (OGTT) in clinical practice. In this study. based on OGTT results and WHO 1998 criteria, we determined if measuring fasting capillary glycaemia (FCG) along with fructosamine and/or glycosylated haemoglobin allows the detection of glucose tolerance abnormalities better than FCG alone. OGTT was performed in 538 patients. Serum fructosamine was determined in 480 of the patients, and glycosylated haemoglobin in 234 of the patients. According to WHO 1998 criteria, the patients were divided into groups due to glucose tolerance abnormalities. Fructosamine correlated stronger with 2-h post-load glucose concentrations than with FCG. HbAlc correlated stronger with FCG than with 2-h post-load glucose. Combined use of fructosamine and FCG predicted 2-h post-load glucose better than combined use of FCG and HbA1c. Receiver operating characteristic curve analyses showed that FCG was the best criterion in discriminating diabetes. Combined use of FCG and fructosamine slightly improved the ability to discriminate glucose tolerance abnormalities from normal glucose tolerance. FCG is the most effective predictor of 2-h post-load glucose and the best criterion for discriminating diabetes and other glucose tolerance abnormalities from normal glucose tolerance. Fructosamine is a potentially useful post-load glycaemia index. OGTT is irreplaceable in identification of patients with high post-load glycaemia.

  7. Absence of the lysophosphatidic acid receptor LPA1 results in abnormal bone development and decreased bone mass.

    PubMed

    Gennero, Isabelle; Laurencin-Dalicieux, Sara; Conte-Auriol, Françoise; Briand-Mésange, Fabienne; Laurencin, Danielle; Rue, Jackie; Beton, Nicolas; Malet, Nicole; Mus, Marianne; Tokumura, Akira; Bourin, Philippe; Vico, Laurence; Brunel, Gérard; Oreffo, Richard O C; Chun, Jerold; Salles, Jean Pierre

    2011-09-01

    Lysophosphatidic acid (LPA) is a lipid mediator that acts in paracrine systems via interaction with a subset of G protein-coupled receptors (GPCRs). LPA promotes cell growth and differentiation, and has been shown to be implicated in a variety of developmental and pathophysiological processes. At least 6 LPA GPCRs have been identified to date: LPA1-LPA6. Several studies have suggested that local production of LPA by tissues and cells contributes to paracrine regulation, and a complex interplay between LPA and its receptors, LPA1 and LPA4, is believed to be involved in the regulation of bone cell activity. In particular, LPA1 may activate both osteoblasts and osteoclasts. However, its role has not as yet been examined with regard to the overall status of bone in vivo. We attempted to clarify this role by defining the bone phenotype of LPA1((-/-)) mice. These mice demonstrated significant bone defects and low bone mass, indicating that LPA1 plays an important role in osteogenesis. The LPA1((-/-)) mice also presented growth and sternal and costal abnormalities, which highlights the specific roles of LPA1 during bone development. Microcomputed tomography and histological analysis demonstrated osteoporosis in the trabecular and cortical bone of LPA1((-/-)) mice. Finally, bone marrow mesenchymal progenitors from these mice displayed decreased osteoblastic differentiation. These results suggest that LPA1 strongly influences bone development both qualitatively and quantitatively and that, in vivo, its absence results in decreased osteogenesis with no clear modification of osteoclasis. They open perspectives for a better understanding of the role of the LPA/LPA1 paracrine pathway in bone pathophysiology.

  8. Absence of the lysophosphatidic acid receptor LPA1 results in abnormal bone development and decreased bone mass☆,☆☆

    PubMed Central

    Gennero, Isabelle; Laurencin-Dalicieux, Sara; Conte-Auriol, Françoise; Briand-Mésange, Fabienne; Laurencin, Danielle; Rue, Jackie; Beton, Nicolas; Malet, Nicole; Mus, Marianne; Tokumura, Akira; Bourin, Philippe; Vico, Laurence; Brunel, Gérard; Oreffo, Richard O. C.; Chun, Jerold; Salles, Jean Pierre

    2013-01-01

    Lysophosphatidic acid (LPA) is a lipid mediator that acts in paracrine systems via interaction with a subset of G protein-coupled receptors (GPCRs). LPA promotes cell growth and differentiation, and has been shown to be implicated in a variety of developmental and pathophysiological processes. At least 6 LPA GPCRs have been identified to date: LPA1–LPA6. Several studies have suggested that local production of LPA by tissues and cells contributes to paracrine regulation, and a complex interplay between LPA and its receptors, LPA1 and LPA4, is believed to be involved in the regulation of bone cell activity. In particular, LPA1may activate both osteoblasts and osteoclasts. However, its role has not as yet been examined with regard to the overall status of bone in vivo. We attempted to clarify this role by defining the bone phenotype of LPA1(−/−) mice. These mice demonstrated significant bone defects and low bone mass, indicating that LPA1 plays an important role in osteogenesis. The LPA1(−/−) mice also presented growth and sternal and costal abnormalities, which highlights the specific roles of LPA1 during bone development. Microcomputed tomography and histological analysis demonstrated osteoporosis in the trabecular and cortical bone of LPA1(−/−) mice. Finally, bone marrow mesenchymal progenitors from these mice displayed decreased osteoblastic differentiation. These results suggest that LPA1 strongly influences bone development both qualitatively and quantitatively and that, in vivo, its absence results in decreased osteogenesis with no clear modification of osteoclasis. They open perspectives for a better understanding of the role of the LPA/LPA1 paracrine pathway in bone pathophysiology. PMID:21569876

  9. Abnormalities in larvae from the once-largest Pacific herring population in Washington State result primarily from factors independent of spawning location

    USGS Publications Warehouse

    Hershberger, P.K.; Elder, N.E.; Wittouck, J.; Stick, K.; Kocan, R.M.

    2005-01-01

    Among larvae from populations of Pacific herring Clupea pallasii in Washington State those from Cherry Point have consistently demonstrated abnormalities indicative of distress, including low weights and lengths at hatch, increased prevalences of skeletal abnormalities, and shorter survival times in food deprivation studies. The biomass of adult, prespawn Pacific herring at Cherry Point declined from 13,606 metric tons in 1973 to a record low 733 metric tons in 2000. However, correlation of larval abnormalities with adult recruitment was weak, indicating that the larval abnormalities did not directly cause the decline. Larval abnormalities originated primarily from factors independent of conditions at the spawning location because they were not reproduced by incubation of foreign zygotes along the Cherry Point shoreline but were reproduced after the development of indigenous zygotes in controlled laboratory conditions. Although the precise cause of the abnormalities was not determined, recent zoographic trends in elevated natural mortality among adult Pacific herring and resulting reduced age structures may be involved. ?? Copyright by the American Fisheries Society 2005.

  10. 42 CFR 493.1281 - Standard: Comparison of test results.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Standard: Comparison of test results. 493.1281... Testing Analytic Systems § 493.1281 Standard: Comparison of test results. (a) If a laboratory performs the... between test results using the different methodologies, instruments, or testing sites. (b) The...

  11. 49 CFR 199.109 - Review of drug testing results.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Review of drug testing results. 199.109 Section... TESTING Drug Testing § 199.109 Review of drug testing results. (a) MRO appointment. Each operator shall... DOT Procedures. (d) MRO reports. The MRO must report all drug test results to the operator...

  12. 42 CFR 493.1281 - Standard: Comparison of test results.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Standard: Comparison of test results. 493.1281... Testing Analytic Systems § 493.1281 Standard: Comparison of test results. (a) If a laboratory performs the... between test results using the different methodologies, instruments, or testing sites. (b) The...

  13. 42 CFR 493.1281 - Standard: Comparison of test results.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Comparison of test results. 493.1281... Testing Analytic Systems § 493.1281 Standard: Comparison of test results. (a) If a laboratory performs the... between test results using the different methodologies, instruments, or testing sites. (b) The...

  14. 49 CFR 234.273 - Results of inspections and tests.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Results of inspections and tests. 234.273 Section... Maintenance, Inspection, and Testing Inspections and Tests § 234.273 Results of inspections and tests. (a) Results of inspections and tests made in compliance with this part shall be recorded on forms provided...

  15. 49 CFR 234.273 - Results of inspections and tests.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Results of inspections and tests. 234.273 Section... Maintenance, Inspection, and Testing Inspections and Tests § 234.273 Results of inspections and tests. (a) Results of inspections and tests made in compliance with this part shall be recorded on forms provided...

  16. 49 CFR 199.109 - Review of drug testing results.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Review of drug testing results. 199.109 Section... TESTING Drug Testing § 199.109 Review of drug testing results. (a) MRO appointment. Each operator shall... DOT Procedures. (d) MRO reports. The MRO must report all drug test results to the operator...

  17. 49 CFR 199.109 - Review of drug testing results.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Review of drug testing results. 199.109 Section... TESTING Drug Testing § 199.109 Review of drug testing results. (a) MRO appointment. Each operator shall... DOT Procedures. (d) MRO reports. The MRO must report all drug test results to the operator...

  18. Squatting test: A posture to study and counteract cardiovascular abnormalities associated with autonomic dysfunction.

    PubMed

    Philips, Jean-Christophe; Scheen, André J

    2011-07-01

    The squatting test is an active posture manoeuvre that imposes one of the most potent orthostatic stresses. In normal subjects, the changes in blood pressure and heart rate are transient because of appropriate baroreflex homeostasis and do not provoke symptoms. However, in various pathological conditions, both the increase in blood pressure during squatting and the decrease in blood pressure during standing may be more important and sustained, potentially leading to complaints and adverse events. Squatting has been used to evaluate patients with tetralogy of Fallot, heart transplant, dysautonomia, including diabetic cardiovascular autonomic neuropathy, and individuals prone to vasovagal syncope. Careful analysis of changes in blood pressure and heart rate during the transition from standing to squatting and from squatting to standing allows the early detection of altered vagal and/or sympathetic function. Of note squatting position has been proposed as a therapeutic means to counteract the fall in blood pressure in patients suffering from dizziness due to dysautonomia and orthostatic hypotension or presenting pre-syncope symptoms, such as soon after exercise. The aims of the present review are to analyse the haemodynamic pattern during a squatting test in various pathological situations and to describe what may be the negative and positive haemodynamic changes associated with this posture. We were especially interested in using the squatting test for the assessment of cardiovascular autonomic neuropathy associated with diabetes mellitus.

  19. Avian Test Battery for the Evaluation of Developmental Abnormalities of Neuro- and Reproductive Systems.

    PubMed

    Kawashima, Takaharu; Ahmed, Walaa M S; Nagino, Koki; Ubuka, Takayoshi; Tsutsui, Kazuyoshi

    2016-01-01

    Most of the currently used toxicity assays for environmental chemicals use acute or chronic systemic or reproductive toxicity endpoints rather than neurobehavioral endpoints. In addition, the current standard approaches to assess reproductive toxicity are time-consuming. Therefore, with increasing numbers of chemicals being developed with potentially harmful neurobehavioral effects in higher vertebrates, including humans, more efficient means of assessing neuro- and reproductive toxicity are required. Here we discuss the use of a Galliformes-based avian test battery in which developmental toxicity is assessed by means of a combination of chemical exposure during early embryonic development using an embryo culture system followed by analyses after hatching of sociosexual behaviors such as aggression and mating and of visual memory via filial imprinting. This Galliformes-based avian test battery shows promise as a sophisticated means not only of assessing chemical toxicity in avian species but also of assessing the risks posed to higher vertebrates, including humans, which are markedly sensitive to nervous or neuroendocrine system dysfunction. PMID:27445667

  20. Avian Test Battery for the Evaluation of Developmental Abnormalities of Neuro- and Reproductive Systems

    PubMed Central

    Kawashima, Takaharu; Ahmed, Walaa M. S.; Nagino, Koki; Ubuka, Takayoshi; Tsutsui, Kazuyoshi

    2016-01-01

    Most of the currently used toxicity assays for environmental chemicals use acute or chronic systemic or reproductive toxicity endpoints rather than neurobehavioral endpoints. In addition, the current standard approaches to assess reproductive toxicity are time-consuming. Therefore, with increasing numbers of chemicals being developed with potentially harmful neurobehavioral effects in higher vertebrates, including humans, more efficient means of assessing neuro- and reproductive toxicity are required. Here we discuss the use of a Galliformes-based avian test battery in which developmental toxicity is assessed by means of a combination of chemical exposure during early embryonic development using an embryo culture system followed by analyses after hatching of sociosexual behaviors such as aggression and mating and of visual memory via filial imprinting. This Galliformes-based avian test battery shows promise as a sophisticated means not only of assessing chemical toxicity in avian species but also of assessing the risks posed to higher vertebrates, including humans, which are markedly sensitive to nervous or neuroendocrine system dysfunction. PMID:27445667

  1. Looking you in the mouth: abnormal gaze in autism resulting from impaired top-down modulation of visual attention.

    PubMed

    Neumann, Dirk; Spezio, Michael L; Piven, Joseph; Adolphs, Ralph

    2006-12-01

    People with autism are impaired in their social behavior, including their eye contact with others, but the processes that underlie this impairment remain elusive. We combined high-resolution eye tracking with computational modeling in a group of 10 high-functioning individuals with autism to address this issue. The group fixated the location of the mouth in facial expressions more than did matched controls, even when the mouth was not shown, even in faces that were inverted and most noticeably at latencies of 200-400 ms. Comparisons with a computational model of visual saliency argue that the abnormal bias for fixating the mouth in autism is not driven by an exaggerated sensitivity to the bottom-up saliency of the features, but rather by an abnormal top-down strategy for allocating visual attention.

  2. Dynamic Docking Test System (DDTS) active table frequency response test results. [Apollo Soyuz Test Project

    NASA Technical Reports Server (NTRS)

    Gates, R. M.

    1974-01-01

    Results are presented of the frequency response test performed on the dynamic docking test system (DDTS) active table. Sinusoidal displacement commands were applied to the table and the dynamic response determined from measured actuator responses and accelerometers mounted to the table and one actuator.

  3. Unequal mitotic sister chromatid exchange: A rare mechanism for chromosomal abnormality resulting in duplication/deletion of chromosome 7q

    SciTech Connect

    Eydoux, P.; Ortenberg, J.; Chalifoux, N.

    1994-09-01

    We report a case of unequal mitotic chromatid exchange, which has rarely been reported as a mechanism for microscopic chromosomal anomalies. The proposita was born at 40 weeks, after an uneventful pregnancy, of parents with a negative family history. The baby was small for gestational age and had dysmorphic features, including scaphocephaly, bilateral epicanthal folds and palpebral ptosis, mild hypertelorism, hypoplasia of orbital contours, right coloboma, bulbous prominent nose, retrognathism, downturned mouth, low set posteriorly rotated ears, tapering of the limbs. bilateral Sydney creases. At 5 months, she was under the 5th percentile for height, weight and head circumference, and had a mild developmental delay. The karyotype showed an abnormality of chromosome 7 in all cells, half with a duplication and half with a deletion of the same region; 46,XX,del(7)(q33{yields}q34)/46,XX,dup(7)(q33{yields}q34). This chromosomal abnormality could be explained by an unequal chromatid exchange occuring in the first mitosis of the embryo. To our knowledge, only one such human microscopic abnormality, involving chromosome Y, has been reported to date. This type of genetic unbalance could be missed by molecular techniques.

  4. Abnormal Facial Emotion Recognition in Depression: Serial Testing in an Ultra-Rapid-Cycling Patient.

    ERIC Educational Resources Information Center

    George, Mark S.; Huggins, Teresa; McDermut, Wilson; Parekh, Priti I.; Rubinow, David; Post, Robert M.

    1998-01-01

    Mood disorder subjects have a selective deficit in recognizing human facial emotion. Whether the facial emotion recognition errors persist during normal mood states (i.e., are state vs. trait dependent) was studied in one male bipolar II patient. Results of five sessions are presented and discussed. (Author/EMK)

  5. Developing and testing a multi-probe resonance electrical impedance spectroscopy system for detecting breast abnormalities

    NASA Astrophysics Data System (ADS)

    Gur, David; Zheng, Bin; Dhurjaty, Sreeram; Wolfe, Gene; Fradin, Mary; Weil, Richard; Sumkin, Jules; Zuley, Margarita

    2009-02-01

    In our previous study, we reported on the development and preliminary testing of a prototype resonance electrical impedance spectroscopy (REIS) system with a pair of probes. Although our pilot study on 150 young women ranging from 30 to 50 years old indicated the feasibility of using REIS output sweep signals to classify between the women who had negative examinations and those who would ultimately be recommended for biopsy, the detection sensitivity was relatively low. To improve performance when using REIS technology, we recently developed a new multi-probe based REIS system. The system consists of a sensor module box that can be easily lifted along a vertical support device to fit women of different height. Two user selectable breast placement "cups" with different curvatures are included in the system. Seven probes are mounted on each of the cups on opposing sides of the sensor box. By rotating the sensor box, the technologist can select the detection sensor cup that better fits the breast size of the woman being examined. One probe is mounted in the cup center for direct contact with the nipple and the other six probes are uniformly distributed along an outside circle to enable contact with six points on the outer and inner breast skin surfaces. The outer probes are located at a distance of 60mm away from the center (nipple) probe. The system automatically monitors the quality of the contact between the breast surface and each of the seven probes and data acquisition can only be initiated when adequate contact is confirmed. The measurement time for each breast is approximately 15 seconds during which time the system records 121 REIS signal sweep outputs generated from 200 KHz to 800 KHz at 5 KHz increments for all preselected probe pairs. Currently we are measuring 6 pairs between the center probe and each of six probes located on the outer circle as well as two pairs between probe pairs on the outer circle. This new REIS system has been installed in our

  6. Initial test results using the GEOS-3 engineering model altimeter

    NASA Technical Reports Server (NTRS)

    Hayne, G. S.; Clary, J. B.

    1977-01-01

    Data from a series of experimental tests run on the engineering model of the GEOS 3 radar altimeter using the Test and Measurement System (TAMS) designed for preflight testing of the radar altimeter are presented. These tests were conducted as a means of preparing and checking out a detailed test procedure to be used in running similar tests on the GEOS 3 protoflight model altimeter systems. The test procedures and results are also included.

  7. Complex patterns of abnormal heartbeats

    NASA Technical Reports Server (NTRS)

    Schulte-Frohlinde, Verena; Ashkenazy, Yosef; Goldberger, Ary L.; Ivanov, Plamen Ch; Costa, Madalena; Morley-Davies, Adrian; Stanley, H. Eugene; Glass, Leon

    2002-01-01

    Individuals having frequent abnormal heartbeats interspersed with normal heartbeats may be at an increased risk of sudden cardiac death. However, mechanistic understanding of such cardiac arrhythmias is limited. We present a visual and qualitative method to display statistical properties of abnormal heartbeats. We introduce dynamical "heartprints" which reveal characteristic patterns in long clinical records encompassing approximately 10(5) heartbeats and may provide information about underlying mechanisms. We test if these dynamics can be reproduced by model simulations in which abnormal heartbeats are generated (i) randomly, (ii) at a fixed time interval following a preceding normal heartbeat, or (iii) by an independent oscillator that may or may not interact with the normal heartbeat. We compare the results of these three models and test their limitations to comprehensively simulate the statistical features of selected clinical records. This work introduces methods that can be used to test mathematical models of arrhythmogenesis and to develop a new understanding of underlying electrophysiologic mechanisms of cardiac arrhythmia.

  8. Combination of physico-chemical analysis, Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay/nuclear abnormalities tests for cyto-genotoxicity assessments of treated effluents discharged from textile industries.

    PubMed

    Hemachandra, Chamini K; Pathiratne, Asoka

    2016-09-01

    Bioassays for cyto-genotoxicity assessments are generally not required in current textile industry effluent discharge management regulations. The present study applied in vivo plant and fish based toxicity tests viz. Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay and nuclear abnormalities tests in combination with physico-chemical analysis for assessing potential cytotoxic/genotoxic impacts of treated textile industry effluents reaching a major river (Kelani River) in Sri Lanka. Of the treated effluents tested from two textile industries, color in the Textile industry 1 effluents occasionally and color, biochemical oxygen demand and chemical oxygen demand in the Textile industry 2 effluents frequently exceeded the specified Sri Lankan tolerance limits for discharge of industrial effluents into inland surface waters. Exposure of A. cepa bulbs to 100% and 12.5% treated effluents from both industries resulted in statistically significant root growth retardation, mito-depression, and induction of chromosomal abnormalities in root meristematic cells in comparison to the dilution water in all cases demonstrating cyto-genotoxicity associated with the treated effluents. Exposure of O. niloticus to the 100% and 12.5% effluents, resulted in erythrocytic genetic damage as shown by elevated total comet scores and induction of nuclear abnormalities confirming the genotoxicity of the treated effluents even with 1:8 dilution. The results provide strong scientific evidence for the crucial necessity of incorporating cyto-genotoxicity impact assessment tools in textile industry effluent management regulations considering human health and ecological health of the receiving water course under chronic exposure. PMID:27209118

  9. 49 CFR 199.109 - Review of drug testing results.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Review of drug testing results. 199.109 Section... MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY DRUG AND ALCOHOL TESTING Drug Testing § 199.109 Review of drug testing results. (a) MRO appointment. Each operator...

  10. 12 CFR 325.207 - Publication of stress test results.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Publication of stress test results. 325.207... GENERAL POLICY CAPITAL MAINTENANCE Annual Stress Test § 325.207 Publication of stress test results. (a... annual stress test in the period starting June 15 and ending June 30. (2) An over $50 billion...

  11. 12 CFR 325.207 - Publication of stress test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Publication of stress test results. 325.207... GENERAL POLICY CAPITAL MAINTENANCE Annual Stress Test § 325.207 Publication of stress test results. (a... annual stress test in the period starting June 15 and ending June 30. (2) An over $50 billion...

  12. Mathematics Placement Test: Typical Results with Unexpected Outcomes

    ERIC Educational Resources Information Center

    Ingalls, Victoria

    2011-01-01

    Based on the results of a prior case-study analysis of mathematics placement at one university, the mathematics department developed and piloted a mathematics placement test. This article describes the implementation process for a mathematics placement test and further analyzes the test results for the pilot group. As an unexpected result, the…

  13. GOES Type III Loop Heat Pipe Life Test Results

    NASA Technical Reports Server (NTRS)

    Ottenstein, Laura

    2011-01-01

    The GOES Type III Loop Heat Pipe (LHP) was built as a life test unit for the loop heat pipes on the GOES N-Q series satellites. This propylene LHP was built by Dynatherm Corporation in 2000 and tested continuously for approximately 14 months. It was then put into storage for 3 years. Following the storage period, the LHP was tested at Swales Aerospace to verify that the loop performance hadn t changed. Most test results were consistent with earlier results. At the conclusion of testing at Swales, the LHP was transferred to NASA/GSFC for continued periodic testing. The LHP has been set up for testing in the Thermal Lab at GSFC since 2006. A group of tests consisting of start-ups, power cycles, and a heat transport limit test have been performed every six to nine months since March 2006. Tests results have shown no change in the loop performance over the five years of testing. This presentation will discuss the test hardware, test set-up, and tests performed. Test results to be presented include sample plots from individual tests, along with conductance measurements for all tests performed.

  14. Effects of Testing Conditions on Conceptual Survey Results

    ERIC Educational Resources Information Center

    Ding, Lin; Reay, Neville W.; Lee, Albert; Bao, Lei

    2008-01-01

    Pre-testing and post-testing is a commonly used method in Physics Education Research to assess student learning gains. It is well recognized in the community that timings and incentives in delivering conceptual tests can impact test results. However, it is difficult to control these variables across different studies. As a common practice, a…

  15. Assessment of abnormal blood flow and efficacy of treatment in patients with systemic sclerosis using a newly developed microwireless laser Doppler flowmeter and arm-raising test.

    PubMed

    Kido, M; Takeuchi, S; Hayashida, S; Urabe, K; Sawada, R; Furue, M

    2007-10-01

    Background Patients with systemic sclerosis (SSc) frequently suffer from recalcitrant digital ulceration because of impaired cutaneous blood flow (CBF). A simple and accurate CBF measurement would be helpful to evaluate the disease status and efficacy of treatment in such patients. Objectives To examine the feasibility of a newly developed, micromachined integrated laser blood flowmeter (MILBF) for evaluation of abnormal CBF responses in patients with SSc. Methods CBF of finger pulp was measured in eight patients with SSc and in six healthy controls using MILBF. CBF in the steady state and the responses to the arm-raising test and cold provocation were assessed. The therapeutic efficacy of a single and an intensive prostaglandin E(1) (PGE(1)) infusion treatment was also evaluated in some of the SSc patients. Results The patients with SSc showed significantly lower steady-state CBF than controls. The rate of blood flow with cold provocation and the velocity of blood flow recovery after cold provocation (VR-CP) tended to be lower in patients with SSc. Augmentation of amplitude of the digital pulse wave by arm raising (AA-AR) was observed in controls, but not in patients with SSc. We also found that VR-CP and AA-AR may be good markers for evaluating the efficacy of vasodilatory treatment. It should be noted that the examined patients did not complain of any pain and/or distress during the arm-raising test, as opposed to during cold provocation. Conclusions CBF assessment using MILBF and an arm-raising test is accurate, noninvasive and well tolerated and thus the combination may be a better alternative method to evaluate abnormal CBF and efficacy of treatment in patients with SSc.

  16. 49 CFR 199.229 - Reporting of alcohol testing results.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 CFR part 40 (at § 40.25 and appendix H to part 40), not later than March 15 of each year for the... 49 Transportation 3 2014-10-01 2014-10-01 false Reporting of alcohol testing results. 199.229... ALCOHOL TESTING Alcohol Misuse Prevention Program § 199.229 Reporting of alcohol testing results. (a)...

  17. 49 CFR 199.229 - Reporting of alcohol testing results.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 CFR part 40 (at § 40.25 and appendix H to part 40), not later than March 15 of each year for the... 49 Transportation 3 2013-10-01 2013-10-01 false Reporting of alcohol testing results. 199.229... ALCOHOL TESTING Alcohol Misuse Prevention Program § 199.229 Reporting of alcohol testing results. (a)...

  18. 49 CFR 199.229 - Reporting of alcohol testing results.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 CFR part 40 (at § 40.25 and appendix H to part 40), not later than March 15 of each year for the... 49 Transportation 3 2012-10-01 2012-10-01 false Reporting of alcohol testing results. 199.229... ALCOHOL TESTING Alcohol Misuse Prevention Program § 199.229 Reporting of alcohol testing results. (a)...

  19. 49 CFR 199.229 - Reporting of alcohol testing results.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 CFR part 40 (at § 40.25 and appendix H to part 40), not later than March 15 of each year for the... 49 Transportation 3 2010-10-01 2010-10-01 false Reporting of alcohol testing results. 199.229... ALCOHOL TESTING Alcohol Misuse Prevention Program § 199.229 Reporting of alcohol testing results. (a)...

  20. 49 CFR 199.229 - Reporting of alcohol testing results.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 CFR part 40 (at § 40.25 and appendix H to part 40), not later than March 15 of each year for the... 49 Transportation 3 2011-10-01 2011-10-01 false Reporting of alcohol testing results. 199.229... ALCOHOL TESTING Alcohol Misuse Prevention Program § 199.229 Reporting of alcohol testing results. (a)...

  1. 12 CFR 252.148 - Disclosure of stress test results.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Disclosure of stress test results. 252.148... RESERVE SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements for Covered Companies § 252.148 Disclosure of stress test results. (a) Public disclosure...

  2. 12 CFR 252.148 - Disclosure of stress test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Disclosure of stress test results. 252.148... RESERVE SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements for Covered Companies § 252.148 Disclosure of stress test results. (a) Public disclosure...

  3. 12 CFR 252.157 - Disclosure of stress test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Disclosure of stress test results. 252.157... RESERVE SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test... Companies § 252.157 Disclosure of stress test results. (a) Public disclosure of results—(1) In general....

  4. 12 CFR 252.157 - Disclosure of stress test results.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Disclosure of stress test results. 252.157... RESERVE SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test... Companies § 252.157 Disclosure of stress test results. (a) Public disclosure of results—(1) In general....

  5. Meiotic abnormalities

    SciTech Connect

    1993-12-31

    Chapter 19, describes meiotic abnormalities. These include nondisjunction of autosomes and sex chromosomes, genetic and environmental causes of nondisjunction, misdivision of the centromere, chromosomally abnormal human sperm, male infertility, parental age, and origin of diploid gametes. 57 refs., 2 figs., 1 tab.

  6. 7 CFR 91.24 - Reports of test results.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Reports of test results. 91.24 Section 91.24... SERVICES AND GENERAL INFORMATION Reporting § 91.24 Reports of test results. (a) Results of analyses are provided, in writing, by facsimile, by e-mail or other electronic means to the applicant. (b) Results...

  7. 7 CFR 91.24 - Reports of test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Reports of test results. 91.24 Section 91.24... SERVICES AND GENERAL INFORMATION Reporting § 91.24 Reports of test results. (a) Results of analyses are provided, in writing, by facsimile, by e-mail or other electronic means to the applicant. (b) Results...

  8. 7 CFR 91.24 - Reports of test results.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Reports of test results. 91.24 Section 91.24... SERVICES AND GENERAL INFORMATION Reporting § 91.24 Reports of test results. (a) Results of analyses are provided, in writing, by facsimile, by e-mail or other electronic means to the applicant. (b) Results...

  9. Test results of the DOE/Sandia 17 meter VAWT

    NASA Technical Reports Server (NTRS)

    Nellums, R. O.; Worstell, M. H.

    1979-01-01

    A review is given of the test program of a 17 meter Vertical Axis Wind Turbine VAWT. Performance test results are discussed including difficulties encountered during the VAWT operation along with ways of solving these problems.

  10. Disruption of Arp2/3 Results in Asymmetric Structural Plasticity of Dendritic Spines and Progressive Synaptic and Behavioral Abnormalities

    PubMed Central

    Kim, Il Hwan; Racz, Bence; Wang, Hong; Burianek, Lauren; Weinberg, Richard; Yasuda, Ryohei; Wetsel, William C.; Soderling, Scott H.

    2013-01-01

    Despite evidence for a strong genetic contribution to several major psychiatric disorders, individual candidate genes account for only a small fraction of these disorders, leading to the suggestion that multigenetic pathways may be involved. Several known genetic risk factors for psychiatric disease are related to the regulation of actin polymerization, which plays a key role in synaptic plasticity. To gain insight into and test the possible pathogenetic role of this pathway, we designed a conditional knockout of the Arp2/3 complex, a conserved final output for actin signaling pathways that orchestrates de novo actin polymerization. Here we report that postnatal loss of the Arp2/3 subunit ArpC3 in forebrain excitatory neurons leads to an asymmetric structural plasticity of dendritic spines, followed by a progressive loss of spine synapses. This progression of synaptic deficits corresponds with an evolution of distinct cognitive, psychomotor, and social disturbances as the mice age. Together these results point to the dysfunction of actin signaling, specifically that which converges to regulate Arp2/3, as an important cellular pathway that may contribute to the etiology of complex psychiatric disorders. PMID:23554489

  11. Disruption of Arp2/3 results in asymmetric structural plasticity of dendritic spines and progressive synaptic and behavioral abnormalities.

    PubMed

    Kim, Il Hwan; Racz, Bence; Wang, Hong; Burianek, Lauren; Weinberg, Richard; Yasuda, Ryohei; Wetsel, William C; Soderling, Scott H

    2013-04-01

    Despite evidence for a strong genetic contribution to several major psychiatric disorders, individual candidate genes account for only a small fraction of these disorders, leading to the suggestion that multigenetic pathways may be involved. Several known genetic risk factors for psychiatric disease are related to the regulation of actin polymerization, which plays a key role in synaptic plasticity. To gain insight into and test the possible pathogenetic role of this pathway, we designed a conditional knock-out of the Arp2/3 complex, a conserved final output for actin signaling pathways that orchestrates de novo actin polymerization. Here we report that postnatal loss of the Arp2/3 subunit ArpC3 in forebrain excitatory neurons leads to an asymmetric structural plasticity of dendritic spines, followed by a progressive loss of spine synapses. This progression of synaptic deficits corresponds with an evolution of distinct cognitive, psychomotor, and social disturbances as the mice age. Together, these results point to the dysfunction of actin signaling, specifically that which converges to regulate Arp2/3, as an important cellular pathway that may contribute to the etiology of complex psychiatric disorders.

  12. TEST RESULTS FOR FUEL-CELL OPERATION ON LANDFILL GAS

    EPA Science Inventory

    Test results from a demonstration of fuel-cell (FC) energy recovery and control of landfill gas emissions are presented. The project addressed two major issues: (i) the design, construction, and testing of a landfill-gas cleanup system; and (ii) a field test of a commercial phos...

  13. Rotor systems research aircraft airplane configuration flight-test results

    NASA Technical Reports Server (NTRS)

    Painter, W. D.; Erickson, R. E.

    1984-01-01

    The rotor systems research aircraft (RSRA) has undergone ground and flight tests, primarily as a compound aircraft. The purpose was to train pilots and to check out and develop the design flight envelope. The preparation and flight test of the RSRA in the airplane, or fixed-wind, configuration are reviewed and the test results are discussed.

  14. EDD-7 Electric Charge Point Meter test results

    SciTech Connect

    Mersman, C.R.

    1993-09-01

    The results of tests evaluating the electric switching portion of the EDD-7 Electric Charge Point Meter (ECPM) are presented. The ECPM is a modified parking meter that allows the purchase of 120 or 240 volt electric power. The ECPM is designed to make electricity available at any vehicle parking location. The test results indicate that the ECPM operated without failure thru a series of over current and ground fault tests at three different test temperatures. The magnitude of current required to trip the over current protection circuitry varied with temperature while the performance of the ground fault interruption circuitry did not change significantly with the test temperature.

  15. 2006 Toyota Highlander-6395 Hyrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Highlander hybrid electric vehicle (Vin Number JTEDW21A160006395). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  16. 2007 Nissan Altima-7982 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Grey; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Nissan Altima hybrid electric vehicle (Vin Number 1N4CL21E27C177982). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  17. 2006 Toyota Highlander-5681 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Highlander hybrid electric vehicle (Vin Number JTEDW21A860005681). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  18. 2007 Toyota Camry-7129 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Camry hybrid electric vehicle (Vin Number JTNBB46K773007129). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  19. Results and Analysis from Space Suit Joint Torque Testing

    NASA Technical Reports Server (NTRS)

    Matty, Jennifer

    2010-01-01

    This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.

  20. Craniofacial Abnormalities

    MedlinePlus

    ... of the skull and face. Craniofacial abnormalities are birth defects of the face or head. Some, like cleft ... palate, are among the most common of all birth defects. Others are very rare. Most of them affect ...

  1. Chromosome Abnormalities

    MedlinePlus

    ... decade, newer techniques have been developed that allow scientists and doctors to screen for chromosomal abnormalities without using a microscope. These newer methods compare the patient's DNA to a normal DNA ...

  2. Walking abnormalities

    MedlinePlus

    ... include: Arthritis of the leg or foot joints Conversion disorder (a psychological disorder) Foot problems (such as a ... injuries. For an abnormal gait that occurs with conversion disorder, counseling and support from family members are strongly ...

  3. Nail abnormalities

    MedlinePlus

    Beau's lines; Fingernail abnormalities; Spoon nails; Onycholysis; Leukonychia; Koilonychia; Brittle nails ... Just like the skin, the fingernails tell a lot about your health: ... the fingernail. These lines can occur after illness, injury to ...

  4. Correlating Flammability of Materials with FTIR Analysis Test Results

    NASA Technical Reports Server (NTRS)

    Moore, Robin; Whitfield, Steve

    2003-01-01

    The purpose of this experiment was to correlate flammability data with FTIR test results. Kydex 100 is a blend of chlorinated polyvinyl chloride and polymethylmethacrylate, with some filler materials. Samples supplied were 0.125 in. thick. 10 samples were taken from a sheet of Kydex and analyzed for flammability and by FTIR spectroscopy. This material was utilized as a round robin sample for flammability testing. The flammability test results were found to vary across the same sheet.

  5. [Return for HIV test results after voluntary screening in Cameroon].

    PubMed

    2016-01-01

    The results of this study indicate that individuals who voluntarily undergo an HIV test in PVTCCs of the Douala district hospitals in Cameroon perceived real advantages and very few disadvantages and barriers to know their HIV status. Particular attention should be given to organizational factors that may be responsible for failure to return for HIV test results and post-test counselling.. PMID:27531439

  6. 49 CFR 219.605 - Positive drug test results; procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Positive drug test results; procedures. 219.605... Programs § 219.605 Positive drug test results; procedures. (a) (b) Procedures for administrative handling by the railroad in the event a specimen provided under this subpart is reported as positive by...

  7. 49 CFR 219.605 - Positive drug test results; procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Positive drug test results; procedures. 219.605... Programs § 219.605 Positive drug test results; procedures. (a) (b) Procedures for administrative handling by the railroad in the event a specimen provided under this subpart is reported as positive by...

  8. 49 CFR 219.605 - Positive drug test results; procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Positive drug test results; procedures. 219.605... Programs § 219.605 Positive drug test results; procedures. (a) (b) Procedures for administrative handling by the railroad in the event a specimen provided under this subpart is reported as positive by...

  9. 49 CFR 219.605 - Positive drug test results; procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Positive drug test results; procedures. 219.605... Programs § 219.605 Positive drug test results; procedures. (a) (b) Procedures for administrative handling by the railroad in the event a specimen provided under this subpart is reported as positive by...

  10. 49 CFR 219.605 - Positive drug test results; procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Positive drug test results; procedures. 219.605... Programs § 219.605 Positive drug test results; procedures. (a) [Reserved] (b) Procedures for administrative handling by the railroad in the event a specimen provided under this subpart is reported as positive by...

  11. Direct Release of Test Results to Patients Increases Patient Engagement and Utilization of Care

    PubMed Central

    Pillemer, Francesca; Price, Rebecca Anhang; Paone, Suzanne; Martich, G. Daniel; Albert, Steve; Haidari, Leila; Updike, Glenn; Rudin, Robert; Liu, Darren; Mehrotra, Ateev

    2016-01-01

    An important focus for meaningful use criteria is to engage patients in their care by allowing them online access to their health information, including test results. There has been little evaluation of such initiatives. Using a mixed methods analysis of electronic health record data, surveys, and qualitative interviews, we examined the impact of allowing patients to view their test results via patient portal in one large health system. Quantitative data were collected for new users and all users of the patient portal. Qualitative interviews occurred with patients who had received an HbA1c or abnormal Pap result. Survey participants were active patient portal users. Our main measures were patient portal usage, factors associated with viewing test results and utilizing care, and patient and provider experiences with patient portal and direct release. Usage data show 80% of all patient portal users viewed test results during the year. Of survey respondents, 82.7% noted test results to be a very useful feature and 70% agreed that patient portal has made their provider more accessible to them. Interviewed patients reported feeling they should have direct access to test results and identified the ability to monitor results over time and prepare prior to communicating with a provider as benefits. In interviews, both patients and physicians reported instances of test results leading to unnecessary patient anxiety. Both groups noted the benefits of results released with provider interpretation. Quantitative data showed patient utilization to increase with viewing test results online, but this effect is mitigated when results are manually released by physicians. Our findings demonstrate that patient portal access to test results was highly valued by patients and appeared to increase patient engagement. However, it may lead to patient anxiety and increase rates of patient visits. We discuss how such unintended consequences can be addressed and larger implications for

  12. Direct Release of Test Results to Patients Increases Patient Engagement and Utilization of Care.

    PubMed

    Pillemer, Francesca; Price, Rebecca Anhang; Paone, Suzanne; Martich, G Daniel; Albert, Steve; Haidari, Leila; Updike, Glenn; Rudin, Robert; Liu, Darren; Mehrotra, Ateev

    2016-01-01

    An important focus for meaningful use criteria is to engage patients in their care by allowing them online access to their health information, including test results. There has been little evaluation of such initiatives. Using a mixed methods analysis of electronic health record data, surveys, and qualitative interviews, we examined the impact of allowing patients to view their test results via patient portal in one large health system. Quantitative data were collected for new users and all users of the patient portal. Qualitative interviews occurred with patients who had received an HbA1c or abnormal Pap result. Survey participants were active patient portal users. Our main measures were patient portal usage, factors associated with viewing test results and utilizing care, and patient and provider experiences with patient portal and direct release. Usage data show 80% of all patient portal users viewed test results during the year. Of survey respondents, 82.7% noted test results to be a very useful feature and 70% agreed that patient portal has made their provider more accessible to them. Interviewed patients reported feeling they should have direct access to test results and identified the ability to monitor results over time and prepare prior to communicating with a provider as benefits. In interviews, both patients and physicians reported instances of test results leading to unnecessary patient anxiety. Both groups noted the benefits of results released with provider interpretation. Quantitative data showed patient utilization to increase with viewing test results online, but this effect is mitigated when results are manually released by physicians. Our findings demonstrate that patient portal access to test results was highly valued by patients and appeared to increase patient engagement. However, it may lead to patient anxiety and increase rates of patient visits. We discuss how such unintended consequences can be addressed and larger implications for

  13. Results of Detailed Hydrologic Characterization Tests - Fiscal Year 1999

    SciTech Connect

    Spane, Frank A.; Thorne, Paul D.; Newcomer, Darrell R.

    2001-01-19

    This report provides the results of detailed hydrologic characterization tests conducted within newly constructed Hanford Site wells during FY 1999. Detailed characterization tests performed during FY 1999 included: groundwater flow characterization, barometric response evaluation, slug tests, single-well tracer tests, constant-rate pumping tests, and in-well vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include: transmissivity, hydraulic conductivity, specific yield, effective porosity, in-well lateral flow velocity, aquifer flow velocity, vertical distribution of hydraulic conductivity (within the well-screen section) and in-well vertical flow velocity. In addition, local groundwater flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed.

  14. Results of Detailed Hydrologic Characterization Tests - FY 1999/011

    SciTech Connect

    Spane, Frank A; Thorne, Paul D; Newcomer, Darrell R

    2001-01-19

    This report provides the results of detailed hydrologic characterization tests conducted within newly constructed Hanford Site wells during FY 1999. Detailed characterization tests performed during FY 1999 included: groundwater flow characterization, barometric response evaluation, slug tests, single-well tracer tests, constant-rate pumping tests, and in-well vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include: transmissivity, hydraulic conductivity, specific yield, effective porosity, in-well lateral flow velocity, aquifer flow velocity, vertical distribution of hydraulic conductivity (within the well-screen section) and in-well vertical flow velocity. In addition, local groundwater flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed.

  15. Results of Detailed Hydrologic Characterization Tests - Fiscal Year 2000

    SciTech Connect

    Spane, Frank A; Thorne, Paul D; Newcomer, Darrell R

    2001-05-15

    This report provides the results of detailed hydrologic characterization tests conducted within eleven Hanford Site wells during fiscal year 2000. Detailed characterization tests performed included groundwater-flow characterization; barometric response evaluation; slug tests; single-well tracer tests; constant-rate pumping tests; and in-well, vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include transmissivity; hydraulic conductivity; specific yield; effective porosity; in-well, lateral flow velocity; aquifer-flow velocity; vertical distribution of hydraulic conductivity (within the well-screen section); and in-well, vertical flow velocity. In addition, local groundwater-flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed.

  16. Environmental testing results over a tracker drive train

    NASA Astrophysics Data System (ADS)

    Martínez, María; Calvo-Parra, Gustavo; Gil, Eduardo; de la Rubia, Oscar; Hillebrand, Mario; Rubio, Francisca; Aipperspach, Wolfgang; Gombert, Andreas

    2014-09-01

    Environmental testing following the draft of the IEC62817 standard has been carried out at ISFOC using a Soitec Solar tracker drive. The objective of this work is twofold; first to assure that the tracker design can perform under varying conditions and survive under extreme conditions and secondly to test the viability and usefulness of the tests described in the standard. After some changes in the device under test (specifically, gear-box oil) the drive system produced satisfactory results, assuring its performance under operational temperatures. Therefore, this work has demonstrated that the tests described in the standard are useful for detecting early failures.

  17. NASA Fastrac Engine Gas Generator Component Test Program and Results

    NASA Technical Reports Server (NTRS)

    Dennis, Henry J., Jr.; Sanders, Tim; Turner, James E. (Technical Monitor)

    2000-01-01

    This presentation consists of viewgraph which review the test program and the results of the tests for the Gas Generator (GG) component for the Fastrac Engine. Included are pictures of the Fastrac (MC-1) Engine and the GG, diagrams of the flight configuration, and schematics of the LOX, and the RP-1 systems and the injector assembly. The normal operating parameters are reviewed, as are the test instrumentation. Also shown are graphs of the hot gas temperature, and the test temperature profiles. The results are summarized.

  18. MODE OF ACTION: NEUROTOXICITY INDUCED BY DEVELOPMENTAL THYROID HORMONE INSUFFICIENCY -- NEUROLOGICAL ABNORMALITIES RESULTING FROM EXPOSURE TO PROPYLTHIOURACIL.

    EPA Science Inventory

    A manuscript summarizes a workshop aimed at developing a framework to determine the relevancy of animal modes-of-action for extrapolation to humans. This specific report used animal data on neurodevelopmental effects of thyroid hormone disruption to test the framework. Polyhaloge...

  19. Finite Element Analysis and Test Results Comparison for the Hybrid Wing Body Center Section Test Article

    NASA Technical Reports Server (NTRS)

    Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.

    2016-01-01

    This report documents the comparison of test measurements and predictive finite element analysis results for a hybrid wing body center section test article. The testing and analysis efforts were part of the Airframe Technology subproject within the NASA Environmentally Responsible Aviation project. Test results include full field displacement measurements obtained from digital image correlation systems and discrete strain measurements obtained using both unidirectional and rosette resistive gauges. Most significant results are presented for the critical five load cases exercised during the test. Final test to failure after inflicting severe damage to the test article is also documented. Overall, good comparison between predicted and actual behavior of the test article is found.

  20. Physical and chemical test results of electrostatic safe flooring materials

    NASA Technical Reports Server (NTRS)

    Gompf, R. H.

    1988-01-01

    This test program was initiated because a need existed at the Kennedy Space Center (KSC) to have this information readily available to the engineer who must make the choice of which electrostatic safe floor to use in a specific application. The information, however, should be of value throughout both the government and private industry in the selection of a floor covering material. Included are the test results of 18 floor covering materials which by test evaluation at KSC are considered electrostatically safe. Tests were done and/or the data compiled in the following areas: electrostatics, flammability, hypergolic compatibility, outgassing, floor type, material thickness, and available colors. Each section contains the test method used to gather the data and the test results.

  1. Mechanical properties testing and results for thermal barrier coatings

    NASA Technical Reports Server (NTRS)

    Cruse, Thomas A.; Johnsen, B. P.; Nagy, Andrew

    1995-01-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  2. Mechanical properties testing and results for thermal barrier coatings

    SciTech Connect

    Cruse, T.A.; Johnsen, B.P.; Nagy, A.

    1995-10-01

    The paper reports on several years of mechanical testing of thermal barrier coatings. The test results were generated to support the development of durability models for the coatings in heat engine applications. The test data that are reviewed include modulus, static strength, and fatigue strength data. The test methods and results are discussed, along with the significant difficulties inherent in mechanical testing of thermal barrier coating materials. The materials include 7 percent wt. and 8 percent wt. yttria, partially stabilized zirconia as well as a cermet material. Both low pressure plasma spray and electron-beam physical vapor deposited coatings were tested. The data indicate the basic trends in the mechanical properties of the coatings over a wide range of isothermal conditions. Some of the trends are correlated with material density.

  3. New results from pulse tests in the CABRI reactor

    SciTech Connect

    Schmitz, F.; Papin, J.; Haessler, M.

    1996-03-01

    At the 21st and 22nd WRSM (1,2), the motivation and objectives of the French program on the behaviour of high burnup PWR fuel under RIA conditions in the CABRI test reactor has been presented. The major results of the three first tests of the test matrix were presented and in particular REP-Na1, which failed at an unexpected low level of fuel enthalpy, was exposed to the community of nuclear safety research. At this time, no final understanding was reached for the origin of the failure. This objective is reached now. Two further tests, REP-Na4 and 5, have been performed in 1995, they demonstrated a satisfactory and safe behaviour by resisting to the early phase of severe loading during the RIA pulse test. Further examination work and analytical testing is in progress and the next tests with MOX fuel are being prepared.

  4. 2007 Nissan Altima-2351 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's (DOE) Advanced Vehicle Testing Activity (AVTA) conducts several different types of tests on hybrid electric vehicles (HEVs), including testing the HEV batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of on-road accelerated testing. This report documents the battery testing performed and the battery testing results for the 2007 Nissan Altima HEV, number 2351 (VIN 1N4CL21E87C172351). The battery testing was performed by the Electric Transportation Engineering Corporation (eTec). The Idaho National Laboratory and eTec conduct the AVTA for DOE’s Vehicle Technologies Program.

  5. 2007 Toyota Camry-6330 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) conducts several different types of tests on hybrid electric vehicles (HEVs), including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Camry hybrid electric vehicle (Vin Number JTNBB46K673006330). Testing was performed by the Electric Transportation Engineering Corporation. The AVTA is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct AVTA for the U.S. Department of Energy.

  6. Rotor systems research aircraft airplane configuration flight-test results

    NASA Technical Reports Server (NTRS)

    Painter, W. D.; Erickson, R. E.

    1984-01-01

    The Rotor Systems Research Aircraft (RSRA) has been undergoing ground and flight tests by Ames Research Center since late 1979, primarily as a compound aircraft. The purpose was to train pilots and to check out and develop the design flight envelope established by the Sikorsky Aircraft Company. This paper reviews the preparation and flight test of the RSRA in the airplane, or fixed-wing, configuration and discusses the results of that test.

  7. Sims Prototype System 2 test results: Engineering analysis

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The testing, problems encountered, and the results and conclusions obtained from tests performed on the IBM Prototype System, 2, solar hot water system, at the Marshall Space Flight Center Solar Test Facility was described. System 2 is a liquid, non draining solar energy system for supplying domestic hot water to single residences. The system consists of collectors, storage tank, heat exchanger, pumps and associated plumbing and controls.

  8. Turbine Air-Flow Test Rig CFD Results for Test Matrix

    NASA Technical Reports Server (NTRS)

    Wilson, Josh

    2003-01-01

    This paper presents the Turbine Air-Flow Test (TAFT) rig computational fluid dynamics (CFD) results for test matrix. The topics include: 1) TAFT Background; 2) Design Point CFD; 3) TAFT Test Plan and Test Matrix; and 4) CFD of Test Points. This paper is in viewgraph form.

  9. Development and Results of a First Generation Least Expensive Approach to Fission: Module Tests and Results

    NASA Technical Reports Server (NTRS)

    Houts, Mike; Godfroy, Tom; Pederson, Kevin; Sena, J. Tom; VanDyke, Melissa; Dickens, Ricky; Reid, Bob J.; Martin, Jim

    2000-01-01

    The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on the Module Unfueled Thermal-hydraulic Test (MUTT) article has been performed at the Marshall Space Flight Center. This paper discusses the results of these experiments and identifies future tests to be performed.

  10. Development of Unified Lab Test Result Master for Multiple Facilities.

    PubMed

    Kume, Naoto; Suzuki, Kenji; Kobayashi, Shinji; Araki, Kenji; Yoshihara, Hiroyuki

    2015-01-01

    A clinical study requires massive amounts of of lab test data, especially for rare diseases. Before creating a protocol, the hypothesis if the protocol will work with enough amount of patients' dataset has to be proved. However, a single facility, such as a university hospital, often faces a lack of number of patients for specific target diseases. Even if collecting datasets from several facilities, there is no active master table that can merge lab test results between the facility datasets. Therefore, the authors develop a unified lab test result master. Because test master standards such as JLAC10 and LOINC are provided from a viewpoint of academic classification of laboratory medicine, the classification does not fit clinical classification, which doctors understand with a mind-set of establishing a clinical study protocol. The authors establish a method to unify masters using an active lab test result master from two university hospitals. PMID:26262349

  11. Development of Unified Lab Test Result Master for Multiple Facilities.

    PubMed

    Kume, Naoto; Suzuki, Kenji; Kobayashi, Shinji; Araki, Kenji; Yoshihara, Hiroyuki

    2015-01-01

    A clinical study requires massive amounts of of lab test data, especially for rare diseases. Before creating a protocol, the hypothesis if the protocol will work with enough amount of patients' dataset has to be proved. However, a single facility, such as a university hospital, often faces a lack of number of patients for specific target diseases. Even if collecting datasets from several facilities, there is no active master table that can merge lab test results between the facility datasets. Therefore, the authors develop a unified lab test result master. Because test master standards such as JLAC10 and LOINC are provided from a viewpoint of academic classification of laboratory medicine, the classification does not fit clinical classification, which doctors understand with a mind-set of establishing a clinical study protocol. The authors establish a method to unify masters using an active lab test result master from two university hospitals.

  12. 40 CFR 204.57-5 - Reporting of test results.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... compressor. (iii) Compressor serial number. (iv) Test results by serial numbers (3) The first test report for each batch sample will contain a listing of all serial numbers in that batch. (b) In the case where an... will not be performed on all other production compressors. (iii) The reason for the replacement,...

  13. Results of field tests of a transportable calorimeter assay system

    SciTech Connect

    Rakel, D.A.; Lemming, J.F.; Rodenburg, W.W.; Duff, M.F.; Jarvis, J.Y.

    1981-01-01

    A transportable calorimetric assay system, developed for use by US Department of Energy inspectors, is described. The results of field tests at three DOE sites are presented. The samples measured in these tests represent a variety of forms (ash, oxide, metal buttons), isotopic composition, and total plutonium content.

  14. Results from tests of three prototype general aviation seats

    NASA Technical Reports Server (NTRS)

    Williams, M. S.; Fasanella, E. L.

    1982-01-01

    Three types of energy absorbing general aviation seats were dynamically tested and evaluated for crash load attenuation. On the basis of the static and dynamic test results, it was recommended that the tubular frame seats be redesigned to initiate stroking at approximately 12 G's rather than the 20 to 25 G range. Lower density foam was recommended for the foam wedge passenger seat.

  15. RTG performance on Galileo and Ulysses and Cassini test results

    SciTech Connect

    Kelly, C. Edward; Klee, Paul M.

    1997-01-10

    Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000 hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted.

  16. RTG performance on Galileo and Ulysses and Cassini test results

    SciTech Connect

    Kelly, C.E.; Klee, P.M.

    1997-01-01

    Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000 hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted. {copyright} {ital 1997 American Institute of Physics.}

  17. 12 CFR 252.147 - Reports of stress test results.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Information (12 CFR part 261). ... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Reports of stress test results. 252.147 Section... SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements...

  18. 12 CFR 252.156 - Reports of stress test results.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ....C. 552(b)) and the Board's Rules Regarding Availability of Information (12 CFR part 261). ... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Reports of stress test results. 252.156 Section... SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements...

  19. 12 CFR 252.147 - Reports of stress test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Information Act (5 U.S.C. 552(b)) and the Board's Rules Regarding Availability of Information (12 CFR part 261). ... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Reports of stress test results. 252.147 Section... SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements...

  20. 12 CFR 252.156 - Reports of stress test results.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ....C. 552(b)) and the Board's Rules Regarding Availability of Information (12 CFR part 261). ... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Reports of stress test results. 252.156 Section... SYSTEM (CONTINUED) ENHANCED PRUDENTIAL STANDARDS (REGULATION YY) Company-Run Stress Test Requirements...

  1. Documenting and Explaining Major Field Test Results among Undergraduate Students

    ERIC Educational Resources Information Center

    Contreras, Salvador; Badua, Frank; Chen, Jiun Shiu; Adrian, Mitchell

    2011-01-01

    The authors investigated the results of the Educational Testing Service Major Field Test (ETS-MFT) administered to business majors at a U.S. state university. Longitudinal trends and cross-sectional differences are documented, including significant performance differences among students of different majors. Findings suggest that a cohort affect…

  2. Sarcoidosis: correlation of pulmonary parenchymal pattern at CT with results of pulmonary function tests

    SciTech Connect

    Bergin, C.J.; Bell, D.Y.; Coblentz, C.L.; Chiles, C.; Gamsu, G.; MacIntyre, N.R.; Coleman, R.E.; Putman, C.E.

    1989-06-01

    The appearances of the lungs on radiographs and computed tomographic (CT) scans were correlated with degree of uptake on gallium scans and results of pulmonary function tests (PFTs) in 27 patients with sarcoidosis. CT scans were evaluated both qualitatively and quantitatively. Patients were divided into five categories on the basis of the pattern of abnormality at CT: 1 = normal (n = 4); 2 = segmental air-space disease (n = 4); 3 = spherical (alveolar) masslike opacities (n = 4); 4 = multiple, discrete, small nodules (n = 6); and 5 = distortion of parenchymal structures (fibrotic end-stage sarcoidosis) (n = 9). The percentage of the volume judged to be abnormal (CT grade) was correlated with PFT results for each CT and radiographic category. CT grades were also correlated with gallium scanning results and percentage of lymphocytes recovered from bronchoalveolar lavage (BAL). Patients in CT categories 1 and 2 had normal lung function, those in category 3 had mild functional impairment, and those in categories 4 and 5 showed moderate to severe dysfunction. The overall CT grade correlated well with PFT results expressed as a percentage of the predicted value. In five patients, CT scans showed extensive parenchymal disease not seen on radiographs. CT grades did not correlate with the results of gallium scanning or BAL lymphocytes. The authors conclude that patterns of parenchymal sarcoidosis seen at CT correlate with the PFT results and can be used to indicate respiratory impairment.

  3. Results of no-flow rotary drill bit comparison testing

    SciTech Connect

    WITWER, K.S.

    1998-11-30

    This document describes the results of testing of a newer rotary sampling bit and sampler insert called the No-Flow System. This No-Flow System was tested side by side against the currently used rotary bit and sampler insert, called the Standard System. The two systems were tested using several ''hard to sample'' granular non-hazardous simulants to determine which could provide greater sample recovery. The No-Flow System measurably outperformed the Standard System in each of the tested simulants.

  4. AFTI/F-16 flight test results and lessons

    NASA Technical Reports Server (NTRS)

    Ishmael, S. D.; Mcmonagle, D. R.

    1983-01-01

    The AFTI/F-16 flight test program is summarized, and several design issues of general interest are addressed. A brief description is given of the test vehicle, its flight control modes, and the flight envelopes in which testing was performed. Flight test results are summarized by addressing benefits experienced in flight control task-tailoring, handling qualities in mission tasks, aircraft structure considerations, digital flight control system performance, and human factors. Finally, several design issues relevant to future fighter aircraft are examined, including degraded flight control, system complexity, simplex information in redundant systems, and single failure propagation in redundant systems.

  5. Apollo experience report: Electronic systems test program accomplishments and results

    NASA Technical Reports Server (NTRS)

    Ohnesorge, T. E.

    1972-01-01

    A chronological record is presented of the Electronic Systems Test Program from its conception in May 1963 to December 1969. The original concept of the program, which was primarily a spacecraft/Manned Space Flight Network communications system compatibility and performance evaluation, is described. The evolution of these concepts to include various levels of test detail, as well as systems level design verification testing, is discussed. Actual implementation of these concepts is presented, and the facility to support the program is described. Test results are given, and significant contributions to the lunar landing mission are underlined. Plans for modifying the facility and the concepts, based on Apollo experience, are proposed.

  6. Test results on reuse of reclaimed shower water - A summary

    NASA Technical Reports Server (NTRS)

    Verostko, Charles E.; Garcia, Rafael; Sauer, Richard; Reysa, Richard P.; Linton, Arthur T.

    1989-01-01

    Results are presented from tests to evaluate a microgravity whole body shower and waste water recovery system design for possible use on the Space Station. Several water recovery methods were tested, including phase change distillation, a thermoelectric hollow fiber membrane evaporation subsystem, and a reverse osmosis dynamic membrane system. Consideration is given to the test hardware, the types of soaps evaluated, the human response to showering with reclaimed water, chemical treatment for microbial control, the procedures for providing hygienic water, and the quality of water produced by the systems. All three of the waste water recovery systems tested successfully produced reclaimed water for reuse.

  7. Preliminary results of steel containment vessel model test

    SciTech Connect

    Luk, V.K.; Hessheimer, M.F.; Matsumoto, T.; Komine, K.; Arai, S.; Costello, J.F.

    1998-04-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11--12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented.

  8. Results of Lunar Rover Drivetrain TRL-6 Environmental Testing

    NASA Astrophysics Data System (ADS)

    Visscher, P.; Edmundson, P.; Ghafoor, N.; Jones, H.; Kleinhenz, J.; Picard, M.

    2016-11-01

    Latest results of work performed by Ontario Drive and Gear Ltd., Canadensys Aerospace Corporation, and partners on Canadian lunar rover development activities for the Canadian Space Agency, including "dirty" thermal vacuum testing of drivetrain unit.

  9. Structural fatigue test results for large wind turbine blade sections

    NASA Technical Reports Server (NTRS)

    Faddoul, J. R.; Sullivan, T. L.

    1982-01-01

    In order to provide quantitative information on the operating life capabilities of wind turbine rotor blade concepts for root-end load transfer, a series of cantilever beam fatigue tests was conducted. Fatigue tests were conducted on a laminated wood blade with bonded steel studs, a low cost steel spar (utility pole) with a welded flange, a utility pole with additional root-end thickness provided by a swaged collar, fiberglass spars with both bonded and nonbonded fittings, and, finally, an aluminum blade with a bolted steel fitting (Lockheed Mod-0 blade). Photographs, data, and conclusions for each of these tests are presented. In addition, the aluminum blade test results are compared to field failure information; these results provide evidence that the cantilever beam type of fatigue test is a satisfactory method for obtaining qualitative data on blade life expectancy and for identifying structurally underdesigned areas (hot spots).

  10. Results from the Astronomy Diagnostic Test National Project

    NASA Astrophysics Data System (ADS)

    Deming, G. L.

    2001-12-01

    During 2000 and 2001, the validity and reliability of the Astronomy Diagnostic Test Version 2.0 (ADT 2.0) were formally investigated through the Astronomy Diagnostic Test National Project. The ADT 2.0 was administered as a pre-test to 5346 students and as a post-test to 3842 students. Student test results were collected from 97 classes that ranged in size from 4 to 320 students with 30 states represented. The 68 professors participating in the ADT National Project taught classes at universities (54%), 4-year colleges (27%), and 2-year colleges (19%). The database was analyzed for reliability at the Ontario Institute for Studies in Education. A pre-test value for Cronbach's alpha of 0.65 and post-test value of 0.76 demonstrate an acceptable degree of internal consistency. The average score for the 44 participating professors who completed the ADT as experts was 98%. Face and content validity were established by combining results from the experts with feedback from 60 student interviews. Student results from the National Project yielded an average score of 32.4% for the pre-test and 47.3% for the post-test. There is a gender discrepancy in favor of males that persists in both the pre-test (11% points) and the post-test (12% points) scores. The variations across geographic distribution and institution types were not significant. In addition to the 21 content items, the ADT 2.0 has 12 student background questions enabling instructors to have a better understanding of who takes introductory astronomy. This research was supported by the National Science Foundation through grants REC-0089239 (GD) and DGE-9714489 (BH).

  11. Low Emissions RQL Flametube Combustor Component Test Results

    NASA Technical Reports Server (NTRS)

    Holdeman, James D.; Chang, Clarence T.

    2001-01-01

    This report describes and summarizes elements of the High Speed Research (HSR) Low Emissions Rich burn/Quick mix/Lean burn (RQL) flame tube combustor test program. This test program was performed at NASA Glenn Research Center circa 1992. The overall objective of this test program was to demonstrate and evaluate the capability of the RQL combustor concept for High Speed Civil Transport (HSCT) applications with the goal of achieving NOx emission index levels of 5 g/kg-fuel at representative HSCT supersonic cruise conditions. The specific objectives of the tests reported herein were to investigate component performance of the RQL combustor concept for use in the evolution of ultra-low NOx combustor design tools. Test results indicated that the RQL combustor emissions and performance at simulated supersonic cruise conditions were predominantly sensitive to the quick mixer subcomponent performance and not sensitive to fuel injector performance. Test results also indicated the mixing section configuration employing a single row of circular holes was the lowest NOx mixer tested probably due to the initial fast mixing characteristics of this mixing section. However, other quick mix orifice configurations such as the slanted slot mixer produced substantially lower levels of carbon monoxide emissions most likely due to the enhanced circumferential dispersion of the air addition. Test results also suggested that an optimum momentum-flux ratio exists for a given quick mix configuration. This would cause undesirable jet under- or over-penetration for test conditions with momentum-flux ratios below or above the optimum value. Tests conducted to assess the effect of quick mix flow area indicated that reduction in the quick mix flow area produced lower NOx emissions at reduced residence time, but this had no effect on NOx emissions measured at similar residence time for the configurations tested.

  12. Human COL2A1-directed SV40 T antigen expression in transgenic and chimeric mice results in abnormal skeletal development

    PubMed Central

    1995-01-01

    The ability of SV40 T antigen to cause abnormalities in cartilage development in transgenic mice and chimeras has been tested. The cis- regulatory elements of the COL2A1 gene were used to target expression of SV40 T antigen to differentiating chondrocytes in transgenic mice and chimeras derived from embryonal stem (ES) cells bearing the same transgene. The major phenotypic consequences of transgenic (pAL21) expression are malformed skeleton, disproportionate dwarfism, and perinatal/neonatal death. Expression of T antigen was tissue specific and in the main characteristic of the mouse alpha 1(II) collagen gene. Chondrocyte densities and levels of alpha 1(II) collagen mRNAs were reduced in the transgenic mice. Islands of cells which express cartilage characteristic genes such as type IIB procollagen, long form alpha 1(IX) collagen, alpha 2(XI) collagen, and aggrecan were found in the articular and growth cartilages of pAL21 chimeric fetuses and neonates. But these cells, which were expressing T antigen, were not properly organized into columns of proliferating chondrocytes. Levels of alpha 1(II) collagen mRNA were reduced in these chondrocytes. In addition, these cells did not express type X collagen, a marker for hypertrophic chondrocytes. The skeletal abnormality in pAL21 mice may therefore be due to a retardation of chondrocyte maturation or an impaired ability of chondrocytes to complete terminal differentiation and an associated paucity of some cartilage matrix components. PMID:7822417

  13. Oscillating flow loss test results in Stirling engine heat exchangers

    NASA Technical Reports Server (NTRS)

    Koester, G.; Howell, S.; Wood, G.; Miller, E.; Gedeon, D.

    1990-01-01

    The results are presented for a test program designed to generate a database of oscillating flow loss information that is applicable to Stirling engine heat exchangers. The tests were performed on heater/cooler tubes of various lengths and entrance/exit configurations, on stacked and sintered screen regenerators of various wire diameters and on Brunswick and Metex random fiber regenerators. The test results were performed over a range of oscillating flow parameters consistent with Stirling engine heat exchanger experience. The tests were performed on the Sunpower oscillating flow loss rig which is based on a variable stroke and variable frequency linear drive motor. In general, the results are presented by comparing the measured oscillating flow losses to the calculated flow losses. The calculated losses are based on the cycle integration of steady flow friction factors and entrance/exit loss coefficients.

  14. Common toad Rhinella arenarum (Hensel, 1867) and its importance in assessing environmental health: test of micronuclei and nuclear abnormalities in erythrocytes.

    PubMed

    Pollo, Favio E; Bionda, Clarisa L; Salinas, Zulma A; Salas, Nancy E; Martino, Adolfo L

    2015-09-01

    Anthropogenic activities may generate significant changes in the integrity of aquatic ecosystems, so long-term monitoring of populations that inhabit them is crucial. Counting micronucleated erythrocytes (MN) and erythrocytic nuclear abnormalities (ENA) in peripheral blood is a widely used method for detecting chromosomal damage due to chemical agents in the water. We analyzed MN and ENA frequency in blood obtained from the common toad Rhinella arenarum populations in sites with different degrees of environmental degradation. The results of this study indicate that there is an association between the frequency of micronuclei and nuclear abnormalities and the degree of environmental alteration recorded for the sites studied.

  15. Uprated OMS Engine Status-Sea Level Testing Results

    NASA Technical Reports Server (NTRS)

    Bertolino, J. D.; Boyd, W. C.

    1990-01-01

    The current Space Shuttle Orbital Maneuvering Engine (OME) is pressure fed, utilizing storable propellants. Performance uprating of this engine, through the use of a gas generator driven turbopump to increase operating pressure, is being pursued by the NASA Johnson Space Center (JSC). Component level design, fabrication, and test activities for this engine system have been on-going since 1984. More recently, a complete engine designated the Integrated Component Test Bed (ICTB), was tested at sea level conditions by Aerojet. A description of the test hardware and results of the sea level test program are presented. These results, which include the test condition operating envelope and projected performance at altitude conditions, confirm the capability of the selected Uprated OME (UOME) configuration to meet or exceed performance and operational requirements. Engine flexibility, demonstrated through testing at two different operational mixture ratios, along with a summary of projected Space Shuttle performance enhancements using the UOME, are discussed. Planned future activities, including ICTB tests at simulated altitude conditions, and recommendations for further engine development, are also discussed.

  16. Results from Testing of Two Rotary Percussive Drilling Systems

    NASA Technical Reports Server (NTRS)

    Kriechbaum, Kristopher; Brown, Kyle; Cady, Ian; von der Heydt, Max; Klein, Kerry; Kulczycki, Eric; Okon, Avi

    2010-01-01

    The developmental test program for the MSL (Mars Science Laboratory) rotary percussive drill examined the e ect of various drill input parameters on the drill pene- tration rate. Some of the input parameters tested were drill angle with respect to gravity and percussive impact energy. The suite of rocks tested ranged from a high strength basalt to soft Kaolinite clay. We developed a hole start routine to reduce high sideloads from bit walk. The ongoing development test program for the IMSAH (Integrated Mars Sample Acquisition and Handling) rotary percussive corer uses many of the same rocks as the MSL suite. An additional performance parameter is core integrity. The MSL development test drill and the IMSAH test drill use similar hardware to provide rotation and percussion. However, the MSL test drill uses external stabilizers, while the IMSAH test drill does not have external stabilization. In addition the IMSAH drill is a core drill, while the MSL drill uses a solid powdering bit. Results from the testing of these two related drilling systems is examined.

  17. Measurement of ability emotional intelligence: results for two new tests.

    PubMed

    Austin, Elizabeth J

    2010-08-01

    Emotional intelligence (EI) has attracted considerable interest amongst both individual differences researchers and those in other areas of psychology who are interested in how EI relates to criteria such as well-being and career success. Both trait (self-report) and ability EI measures have been developed; the focus of this paper is on ability EI. The associations of two new ability EI tests with psychometric intelligence, emotion perception, and the Mayer-Salovey-Caruso EI test (MSCEIT) were examined. The new EI tests were the Situational Test of Emotion Management (STEM) and the Situational Test of Emotional Understanding (STEU). Only the STEU and the MSCEIT Understanding Emotions branch were significantly correlated with psychometric intelligence, suggesting that only understanding emotions can be regarded as a candidate new intelligence component. These understanding emotions tests were also positively correlated with emotion perception tests, and STEM and STEU scores were positively correlated with MSCEIT total score and most branch scores. Neither the STEM nor the STEU were significantly correlated with trait EI tests, confirming the distinctness of trait and ability EI. Taking the present results as a starting-point, approaches to the development of new ability EI tests and models of EI are suggested.

  18. New York lawsuit seeks release of newborns' HIV test results.

    PubMed

    1995-04-21

    The Association to Benefit Children (ABC), a New York advocacy group, has sued to force the state to inform mothers of the HIV test results of their newborn infants. The suit, filed in March, 1995, in the Supreme Court for New York County, asked the court to declare unconstitutional the state's policy of testing newborns without disclosing the test results to their mothers. Since 1987, the New York Health Department has been routinely testing all newborns for evidence of HIV antibodies. However, results are not divulged because the testing is intended to assess the extent of HIV infection in a given area or demographic group. The suit alleged that the blind HIV testing procedure denies babies their right to equal protection under the Fourteenth Amendment to the U.S. Constitution and Article 1, Section 11 of the state constitution. According to the suit, early diagnosis is essential as HIV infection generally develops faster in infants than in adults. The suit also sought testing, counseling and treatment of all at-risk children in the foster care system. PMID:11362392

  19. Flight Test Results of a Thermoelectric Energy Harvester for Aircraft

    NASA Astrophysics Data System (ADS)

    Samson, D.; Kluge, M.; Fuss, T.; Schmid, U.; Becker, Th.

    2012-06-01

    The idea of thermoelectric energy harvesting for low-power wireless sensor systems in aircraft and its practical implementation was recently published. The concept of using a thermoelectric generator (TEG) attached to the aircraft inner hull and a thermal storage device to create an artificial temperature gradient at the TEG during take-off and landing from the temperature changes of the fuselage has passed initial tests and is now subject to flight testing. This work presents preflight test results, e.g., vibration and temperature testing of the harvesters, the practical installation of two harvesting devices inside a test plane, and the first test flight results. Several flight cycles with different flight profiles, flight lengths, and outside temperatures have been performed. Although the influence of different flight profiles on the energy output of the harvester can be clearly observed, the results are in good agreement with expectations from numerical simulations with boundary conditions evaluated from initial climate chamber experiments. In addition, the flight test demonstrates that reliable operation of thermoelectric energy harvesting in harsh aircraft environments seems to be feasible, therefore paving the way for realization of energy-autonomous, wireless sensor networks.

  20. Changes over time in milk test results following pancreatectomy

    PubMed Central

    Aoki, Hideki; Utsumi, Masashi; Sui, Kenta; Kanaya, Nobuhiko; Kunitomo, Tomoyoshi; Takeuchi, Hitoshi; Takakura, Norihisa; Shiozaki, Shigehiro; Matsukawa, Hiroyoshi

    2016-01-01

    AIM: To investigate changes over time in, and effects of sealing technology on, milk test results following pancreatectomy. METHODS: From April 2008 to October 2013, 66 pancreatic resections were performed at the Iwakuni Clinical Center. The milk test has been routinely conducted at the institute whenever possible during pancreatectomy. The milk test comprises the following procedure: A nasogastric tube is inserted until the third portion of the duodenum, followed by injection of 100 mL of milk through the tube. If a chyle leak is present, the patient tests positive in this milk test based on the observation of a white milky discharge. Positive milk test rates, leakage sites, and chylous ascites incidence were examined. LigaSure™ (LS; Covidien, Dublin, Ireland), a vessel-sealing device, is routinely used in pancreatectomy. Positive milk test rates before and after use of LS, as well as drain discharge volume at the 2nd and 3rd postoperative days, were compared retrospectively. Finally, positive milk test rates and chylous ascites incidence were compared with the results of a previous report. RESULTS: Fifty-nine milk tests were conducted during pancreatectomy. The positive milk test rate for all pancreatectomy cases was 13.6% (8 of 59 cases). One case developed postoperative chylous ascites (2.1% among the pancreatoduedenectomy cases and 1.7% among all pancreatectomies). Positive rates by procedure were 12.8% for pancreatoduodenectomy and 22.2% for distal pancreatectomy. Positive rates by disease were 17.9% for pancreatic and 5.9% for biliary diseases. When comparing results from before and after use of LS, positive milk test rates in pancreatoduodenectomy were 13.0% before and 12.5% after, while those in distal pancreatectomy were 33.3% and 0%. Drainage volume tended to decrease when LS was used on the 3rd postoperative day (volumes were 424 ± 303 mL before LS and 285 ± 185 mL after, P = 0.056). Both chylous ascites incidence and positive milk test rates

  1. Test results of the highly instrumented Space Shuttle Main Engine

    NASA Technical Reports Server (NTRS)

    Mcconnaughey, H. V.; Leopard, J. L.; Lightfoot, R. M.

    1992-01-01

    Test results of a highly instrumented Space Shuttle Main Engine (SSME) are presented. The instrumented engine, when combined with instrumented high pressure turbopumps, contains over 750 special measurements, including flowrates, pressures, temperatures, and strains. To date, two different test series, accounting for a total of sixteen tests and 1,667 seconds, have been conducted with this engine. The first series, which utilized instrumented turbopumps, characterized the internal operating environment of the SSME for a variety of operating conditions. The second series provided system-level validation of a high pressure liquid oxygen turbopump that had been retrofitted with a fluid-film bearing in place of the usual pump-end ball bearings. Major findings from these two test series are highlighted in this paper. In addition, comparisons are made between model predictions and measured test data.

  2. Designs and test results for three new rotational sensors

    USGS Publications Warehouse

    Jedlicka, P.; Kozak, J.T.; Evans, J.R.; Hutt, C.R.

    2012-01-01

    We discuss the designs and testing of three rotational seismometer prototypes developed at the Institute of Geophysics, Academy of Sciences (Prague, Czech Republic). Two of these designs consist of a liquid-filled toroidal tube with the liquid as the proof mass and providing damping; we tested the piezoelectric and pressure transduction versions of this torus. The third design is a wheel-shaped solid metal inertial sensor with capacitive sensing and magnetic damping. Our results from testing in Prague and at the Albuquerque Seismological Laboratory of the US Geological Survey of transfer function and cross-axis sensitivities are good enough to justify the refinement and subsequent testing of advanced prototypes. These refinements and new testing are well along.

  3. NEXT Ion Engine 2000 Hour Wear Test Results

    NASA Technical Reports Server (NTRS)

    Soulas, George C.; Kamhawi, Hani; Patterson, Michael J.; Britton, Melissa A.; Frandina, Michael M.

    2004-01-01

    The results of the NEXT 2000 h wear test are presented. This test was conducted with a 40 cm engineering model ion engine, designated EM1, at a 3.52 A beam current and 1800 V beam power supply voltage. Performance tests, which were conducted over a throttling range of 1.1 to 6.9 kW throughout the wear test, demonstrated that EM1 satisfied all thruster performance requirements. The ion engine accumulated 2038 h of operation at a thruster input power of 6.9 kW, processing 43 kg of xenon. Overall ion engine performance, which includes thrust, thruster input power, specific impulse, and thrust efficiency, was steady with no indications of performance degradation. The ion engine was also inspected following the test. This paper presents these findings.

  4. Results of acoustic emission tests on Halon fire bottles

    SciTech Connect

    Beattie, A.G.; Shurtleff, W.W.

    1996-10-01

    An acoustic emission tester for aircraft Halon bottles has been developed. The necessary load is applied by heating the bottles. Acoustic emission is monitored during the heating by six sensors held in position by a special fixture. This fixture was designed to fit spheres with diameters between 5 and 16 inches. A prototype has been undergoing testing in two commercial Halon bottle repair and test facilities. Results to date indicate that about 97 percent of the bottles tested show no indications of any flaws. The other three percent have had indications of flaws in non-critical areas of the bottles. All bottles tested to date have passed the hydrostatic test required by the Department of Transportation (DOT).

  5. Communication of Genetic Test Results to Family and Health Care Providers Following Disclosure of Research Results

    PubMed Central

    Graves, Kristi D.; Sinicrope, Pamela S.; Esplen, Mary Jane; Peterson, Susan K.; Patten, Christi A.; Lowery, Jan; Sinicrope, Frank A.; Nigon, Sandra K.; Borgen, Joyce; Gorin, Sherri Sheinfeld; Keogh, Louise A.; Lindor, Noralane M.

    2014-01-01

    Purpose Few studies have examined methods to promote communication following the return of DNA mismatch repair (MMR) genetic test results obtained during research. The purpose of the present study was to evaluate a telephone protocol for returning research results of MMR gene testing to identify Lynch Syndrome. Methods We invited individuals with known MMR mutations in their family who were enrolled in the Colon Cancer Family Registry at the Mayo Clinic to participate. Participants completed surveys before and 6-months after MMR test result disclosure. Results Among 107 participants, 79% opted to learn their MMR test results; of these, 44 (41%) carried MMR mutations. Post-disclosure, 54% reported screening for any type of cancer. Among carriers, >74% reported communicating results to family; communication was predicted by baseline confidence in coping with the genetic test result (Z=1.97, P=.04). Result disclosure to a physician was predicted by greater perceived cancer risk (Z=2.08, P=.03) and greater intention to share results with family (Z=3.07, P=.002). Conclusions Research vs. clinically-based gene disclosure presents challenges. A telephone disclosure process for the return of research-based results among Lynch syndrome families led to high rates of result uptake and participant communication of results to providers and family members. PMID:24091800

  6. Cold vacuum drying proof of performance (first article testing) test results

    SciTech Connect

    MCCRACKEN, K.J.

    1999-06-23

    This report presents and details the test results of the first of a kind process referred to as Cold Vacuum Drying (CVD). The test results are compiled from several months of testing of the first process equipment skid and ancillary components to de-water and dry Multi-Canister Overpacks (MCO) filled with Spent Nuclear Fuel (SNF). The tests results provide design verifications, equipment validations, model validation data, and establish process parameters.

  7. Spirometric abnormalities among welders

    SciTech Connect

    Rastogi, S.K.; Gupta, B.N.; Husain, T.; Mathur, N.; Srivastava, S. )

    1991-10-01

    A group of manual welders age group 13-60 years having a mean exposure period of 12.4 {plus minus} 1.12 years were subjected to spirometry to evaluate the prevalence of spirometric abnormalities. The welders showed a significantly higher prevalence of respiratory impairment than that observed among the unexposed controls as a result of exposure to welding gases which comprised fine particles of lead, zinc, chromium, and manganese. This occurred despite the lower concentration of the pollutants at the work place. In the expose group, the smoking welders showed a prevalence of respiratory impairment significantly higher than that observed in the nonsmoking welders. The results of the pulmonary function tests showed a predominantly restrictive type of pulmonary impairment followed by a mixed ventilatory defect among the welders. The effect of age on pulmonary impairment was not discernible. Welders exposed for over 10 years showed a prevalence of respiratory abnormalities significantly higher than those exposed for less than 10 years. Smoking also had a contributory role.

  8. Automated Testing Infrastructure and Result Comparison for Geodynamics Codes

    NASA Astrophysics Data System (ADS)

    Heien, E. M.; Kellogg, L. H.

    2013-12-01

    The geodynamics community uses a wide variety of codes on a wide variety of both software and hardware platforms to simulate geophysical phenomenon. These codes are generally variants of finite difference or finite element calculations involving Stokes flow or wave propagation. A significant problem is that codes of even low complexity will return different results depending on the platform due to slight differences in hardware, software, compiler, and libraries. Furthermore, changes to the codes during development may affect solutions in unexpected ways such that previously validated results are altered. The Computational Infrastructure for Geodynamics (CIG) is funded by the NSF to enhance the capabilities of the geodynamics community through software development. CIG has recently done extensive work in setting up an automated testing and result validation system based on the BaTLab system developed at the University of Wisconsin, Madison. This system uses 16 variants of Linux and Mac platforms on both 32 and 64-bit processors to test several CIG codes, and has also recently been extended to support testing on the XSEDE TACC (Texas Advanced Computing Center) Stampede cluster. In this work we overview the system design and demonstrate how automated testing and validation occurs and results are reported. We also examine several results from the system from different codes and discuss how changes in compilers and libraries affect the results. Finally we detail some result comparison tools for different types of output (scalar fields, velocity fields, seismogram data), and discuss within what margins different results can be considered equivalent.

  9. Autonomous Airborne Refueling Demonstration Phase I Flight Test Results

    NASA Technical Reports Server (NTRS)

    Dibley, Ryan

    2007-01-01

    This viewgraph presentation provides flight test results of the automatic in-flight refueling of an Uninhabited Aerial Vehicle (UAV) using an automated hose-and-drogue refueling method. The program objective was to demonstrate one fully automatic engagement between the receiver and tanker aircraft. Systems involved, concept of operations, results and conclusions are included.

  10. Indeterminate and discrepant rapid HIV test results in couples' HIV testing and counselling centres in Africa

    PubMed Central

    2011-01-01

    Background Many HIV voluntary testing and counselling centres in Africa use rapid antibody tests, in parallel or in sequence, to establish same-day HIV status. The interpretation of indeterminate or discrepant results between different rapid tests on one sample poses a challenge. We investigated the use of an algorithm using three serial rapid HIV tests in cohabiting couples to resolve unclear serostatuses. Methods Heterosexual couples visited the Rwanda Zambia HIV Research Group testing centres in Kigali, Rwanda, and Lusaka, Zambia, to assess HIV infection status. Individuals with unclear HIV rapid antibody test results (indeterminate) or discrepant results were asked to return for repeat testing to resolve HIV status. If either partner of a couple tested positive or indeterminate with the screening test, both partners were tested with a confirmatory test. Individuals with indeterminate or discrepant results were further tested with a tie-breaker and monthly retesting. HIV-RNA viral load was determined when HIV status was not resolved by follow-up rapid testing. Individuals were classified based on two of three initial tests as "Positive", "Negative" or "Other". Follow-up testing and/or HIV-RNA viral load testing determined them as "Infected", "Uninfected" or "Unresolved". Results Of 45,820 individuals tested as couples, 2.3% (4.1% of couples) had at least one discrepant or indeterminate rapid result. A total of 65% of those individuals had follow-up testing and of those individuals initially classified as "Negative" by three initial rapid tests, less than 1% were resolved as "Infected". In contrast, of those individuals with at least one discrepant or indeterminate result who were initially classified as "Positive", only 46% were resolved as "Infected", while the remainder was resolved as "Uninfected" (46%) or "Unresolved" (8%). A positive HIV serostatus of one of the partners was a strong predictor of infection in the other partner as 48% of individuals who

  11. Test results of Ya-21u thermionic space power system

    SciTech Connect

    Paramonov, D.V.; El-Genk, M.S.

    1997-01-01

    The Soviet-made TOPAZ-II space nuclear power system unit designated Ya-21u underwent a total of 15 tests both in the Union of Soviet Socialist Republic (USSR) (1989--1990) and in the US (August 1993 to March 1995) for a cumulative test/operation time of 7681 h at conditions far exceeding design limits. These tests included steady-state operation at different power levels, fast start-ups and power optimizations, and shock and vibration tests. Test results are presented and analyzed. Results indicate a gradual change in the performance parameters such as the optimum cesium pressure and optimum load voltage. The electric power and conversion efficiency of the unit at an input thermal power of 105 kW decreased from 3.7 kW (electric) and 4% in the test in the USSR to 2.13 kW (electric) and 2.3% in the last test in the US. A discussion and qualitative assessment of potential causes of the performance changes of the Ya-21u unit are given.

  12. Advanced Stirling Convertor Durability Testing: Plans and Interim Results

    NASA Technical Reports Server (NTRS)

    Meer, David W.; Oriti, Salvatore M.

    2012-01-01

    The U.S. Department of Energy (DOE), Lockheed Martin Corporation (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. In support of this program, GRC has been involved in testing Stirling convertors, including the Advanced Stirling Convertor (ASC), for use in the ASRG. This testing includes electromagnetic interference/compatibility (EMI/EMC), structural dynamics, advanced materials, organics, and unattended extended operation. The purpose of the durability tests is to experimentally demonstrate the margins in the ASC design. Due to the high value of the hardware, previous ASC tests focused on establishing baseline performance of the convertors within the nominal operating conditions. The durability tests present the first planned extension of the operating conditions into regions beyond those intended to meet the product spec, where the possibility exists of lateral contact, overstroke, or over-temperature events. These tests are not intended to cause damage that would shorten the life of the convertors, so they can transition into extended operation at the conclusion of the tests. This paper describes the four tests included in the durability test sequence: 1) start/stop cycling, 2) exposure to constant acceleration in the lateral and axial directions, 3) random vibration at increased piston amplitude to induce contact events, and 4) overstroke testing to simulate potential failures during processing or during the mission life where contact events could occur. The paper also summarizes the analysis and simulation used to predict the results of each of these tests.

  13. Advanced Stirling Convertor Durability Testing: Plans and Interim Results

    NASA Technical Reports Server (NTRS)

    Meer, Dave; Oriti, Sal

    2012-01-01

    The U.S. Department of Energy (DOE), Lockheed Martin Corporation (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. In support of this program, NASA?s Glenn Research Center (GRC) has been involved in testing Stirling convertors, including the Advanced Stirling Convertor (ASC), for use in the ASRG. This testing includes electromagnetic interference/compatibility (EMI/EMC), structural dynamics, advanced materials, organics, and unattended extended operation. The purpose of the durability tests is to experimentally demonstrate the margins in the ASC design. Due to the high value of the hardware, previous ASC tests focused on establishing baseline performance of the convertors within the nominal operating conditions. The durability tests present the first planned extension of the operating conditions into regions beyond those intended to meet the product spec, where the possibility exists of lateral contact, overstroke, or over-temperature events. These tests are not intended to cause damage that would shorten the life of the convertors, so they can transition into extended operation at the conclusion of the tests. This paper describes the four tests included in the durability test sequence: 1) start/stop cycling, 2) exposure to constant acceleration in the lateral and axial directions, 3) random vibration at increased piston amplitude to induce contact events, and 4) overstroke testing to simulate potential failures during processing or during the mission life where contact events could occur. The paper also summarizes the analysis and simulation used to predict the results of each of these tests.

  14. SLS Scale Model Acoustic Test Liftoff Results and Comparisons

    NASA Technical Reports Server (NTRS)

    Houston, Janice; Counter, Douglas; Giacomoni, Clothilde

    2015-01-01

    The liftoff phase induces acoustic loading over a broad frequency range for a launch vehicle. These external acoustic environments are then used in the prediction of internal vibration responses of the vehicle and components which result in the qualification levels. Thus, predicting these liftoff acoustic (LOA) environments is critical to the design requirements of any launch vehicle. If there is a significant amount of uncertainty in the predictions or if acoustic mitigation options must be implemented, a subscale acoustic test is a feasible design phase test option to verify the LOA environments. The NASA Space Launch System (SLS) program initiated the Scale Model Acoustic Test (SMAT) to verify the predicted SLS LOA environments.

  15. Results of the Cryogenic Testing of the SNS Prototype Cryomodule

    SciTech Connect

    I.E. Campisi; G. Ciovati; E. Daly; K. Davis; J.R. Delayen; M. Drury; P. Kneisel; J. Mammosser; T. Powers; J. Preble; C.E. Reece; M. Stirbet; H. Wang; K. Wilson; S. Smee

    2002-08-01

    Jefferson Lab has developed a prototype of the medium beta SNS cryomodule. Tests were recently performed on the module, which includes three 805 MHz cavities of beta=0.61, with coaxial power couplers and frequency tuners (mechanical and piezoelectric). The cavities exceeded accelerating gradients of 16 MV/m (design value 10.5 MV/m) with Q{sub 0}'s of about 10{sup 10} at the design field. One of the power couplers has been tested up to peak powers of over 700 kW. Results of the tests are reported in this paper.

  16. Wellbore inertial navigation system (WINS) software development and test results

    SciTech Connect

    Wardlaw, R. Jr.

    1982-09-01

    The structure and operation of the real-time software developed for the Wellbore Inertial Navigation System (WINS) application are described. The procedure and results of a field test held in a 7000-ft well in the Nevada Test Site are discussed. Calibration and instrumentation error compensation are outlined, as are design improvement areas requiring further test and development. Notes on Kalman filtering and complete program listings of the real-time software are included in the Appendices. Reference is made to a companion document which describes the downhole instrumentation package.

  17. Acoustic results of the Boeing model 360 whirl tower test

    NASA Technical Reports Server (NTRS)

    Watts, Michael E.; Jordan, David

    1990-01-01

    An evaluation is presented for whirl tower test results of the Model 360 helicopter's advanced, high-performance four-bladed composite rotor system intended to facilitate over-200-knot flight. During these performance measurements, acoustic data were acquired by seven microphones. A comparison of whirl-tower tests with theory indicate that theoretical prediction accuracies vary with both microphone position and the inclusion of ground reflection. Prediction errors varied from 0 to 40 percent of the measured signal-to-peak amplitude.

  18. Physical separations soil washing system cold test results

    SciTech Connect

    McGuire, J.P.

    1993-07-28

    This test summary describes the objectives, methodology, and results of a physical separations soil-washing system setup and shakedown test using uncontaminated soil. The test is being conducted in preparation for a treatability test to be conducted in the North Pond of the 300-FF-1 Operable Unit. It will be used to assess the feasibility of using a physical separations process to reduce the volume of contaminated soils in the 300-FF-1 Operable Unit. The test is described in DOE-RL (1993). The setup test was conducted at an uncontrolled area located approximately 3.2 km northwest of the 300-FF-1 Operable Unit. The material processed was free of contamination. The physical separation equipment to be used in the test was transferred to the US Department of Energy (DOE) by the US Environmental Protection Agency (EPA) Risk Reduction Engineering Laboratory. On May 13, 1993, soil-washing equipment was moved to the cold test location. Design assistance and recommendation for operation was provided by the EPA.

  19. ART-XC/SRG: results of thermo-vacuum tests

    NASA Astrophysics Data System (ADS)

    Semena, N.; Pavlinsky, M.; Buntov, M.; Serbinov, D.; Gurova, E.; Tambov, V.; Roiz, I.; Garin, M.; Lazarchuk, V.; Zaytcev, A.; Martunov, V.; Shabarchin, A.; Sokolov, A.

    2014-07-01

    ART-XC - a medium-x-ray-energy survey instrument for SRG project is being developed in Russia. Space Research institute (IKI) and Federal Nuclear Center (VNIIEF) has developed and tested the STM (Structural and Thermal Model) of ART-XC/SRG Instrument. The STM was tested in a 40 m3 vacuum chamber, equipped with black cryogenic screens, cooled by liquid nitrogen. During the tests various thermal telescope modes were simulated. In particular we have simulated emergency mode, when mirrors heaters were switched-off. During the tests temperature of instrument's structure was controlled by 64 independent sensors. Stability of optical axis of mirror systems was also measured. STM test has shown that temperature of mirror system was lower than required, temperature of detectors met the requirements. The test also confirmed geometrical stability of the carbon fiber housing despite of significant temperature gradients. Additional experiments with two mirror systems, each containing a full set of simple nickel shells, were performed. In these experiments we have measured longitudinal and transverse temperature gradients of mirror systems. Next thermovacuum tests of the qualification model of the ART-XC instrument are being prepared. Results of STM tests are presented in this paper.

  20. Thermal analysis of low layer density multilayer insulation test results

    NASA Astrophysics Data System (ADS)

    Johnson, Wesley

    2012-06-01

    Investigation of the thermal performance of low layer density multilayer insulations is important for designing long-duration space exploration missions involving the storage of cryogenic propellants. Theoretical calculations show an analytical optimal layer density. However, the appropriate test data by which to evaluate these calculations have been only recently obtained. As part of a recent research project, NASA procured several multilayer insulation test articles for calorimeter testing. These blanket-type test articles were configured to allow a layer density variation from 0.5 to 2.5 layers per millimeter. The coupon testing was completed by the Cryogenics Test Laboratory at Kennedy Space Center using the cylindrical Cryostat-100 apparatus. The results show insulation properties as a function of layer density for multiple points. Overlaying these new results with data from the literature reveals an optimum layer density; however, the value is approximately twice as high as predicted. The data also show that the transition region between high vacuum and no vacuum is dependent on the spacing of the reflective layers. These results aid in the understanding of the performance parameters of MLI and help to complete the body of literature on the topic.

  1. Thermal Analysis of Low Layer Density Multilayer Insulation Test Results

    NASA Technical Reports Server (NTRS)

    Johnson, Wesley L.

    2011-01-01

    Investigation of the thermal performance of low layer density multilayer insulations is important for designing long-duration space exploration missions involving the storage of cryogenic propellants. Theoretical calculations show an analytical optimal layer density, as widely reported in the literature. However, the appropriate test data by which to evaluate these calculations have been only recently obtained. As part of a recent research project, NASA procured several multilayer insulation test coupons for calorimeter testing. These coupons were configured to allow for the layer density to be varied from 0.5 to 2.6 layer/mm. The coupon testing was completed using the cylindrical Cryostat-l00 apparatus by the Cryogenics Test Laboratory at Kennedy Space Center. The results show the properties of the insulation as a function of layer density for multiple points. Overlaying these new results with data from the literature reveals a minimum layer density; however, the value is higher than predicted. Additionally, the data show that the transition region between high vacuum and no vacuum is dependent on the spacing of the reflective layers. Historically this spacing has not been taken into account as thermal performance was calculated as a function of pressure and temperature only; however the recent testing shows that the data is dependent on the Knudsen number which takes into account pressure, temperature, and layer spacing. These results aid in the understanding of the performance parameters of MLI and help to complete the body of literature on the topic.

  2. Prolonged elevation of intraocular pressure results in retinal ganglion cell loss and abnormal retinal function in mice

    PubMed Central

    Khan, A Kareem; Tse, Dennis Y; van der Heijden, Meike; Shah, Priya; Nusbaum, Derek; Yang, Zhuo; Wu, Samuel M; Frankfort, Benjamin J

    2014-01-01

    The purpose of this study was to assess the impact of prolonged intraocular pressure (IOP) elevation on retinal anatomy and function in a mouse model of experimental glaucoma. IOP was elevated by anterior chamber injection of a fixed combination of polystyrene beads and sodium hyaluronate, and maintained via re-injection after 24 weeks. IOP was measured weekly with a rebound tonometer for 48 weeks. Histology was assessed with a combination of retrograde labeling and antibody staining. Retinal physiology and function was assessed with dark-adapted electroretinograms (ERGs). Comparisons between bead-injected animals and various controls were conducted at both 24 and 48 weeks after bead injection. IOP was elevated throughout the study. IOP elevation resulted in a reduction of retinal ganglion cell (RGCs) and an increase in axial length at both 24 and 48 weeks after bead injection. The b-wave amplitude of the ERG was increased to the same degree in bead-injected eyes at both time points, similar to previous studies. The positive scotopic threshold response (pSTR) amplitude, a measure of RGC electrical function, was diminished at both 24 and 48 weeks when normalized to the increased b-wave amplitude. At 48 weeks, the pSTR amplitude was reduced even without normalization, suggesting more profound RGC dysfunction. We conclude that injection of polystyrene beads and sodium hyaluronate causes chronic IOP elevation which results in phenotypes of stable b-wave amplitude increase and progressive pSTR amplitude reduction, as well as RGC loss and axial length elongation. PMID:25450059

  3. Compound heterozygosity for a dominant glycine substitution and a recessive internal duplication mutation in the type XVII collagen gene results in junctional epidermolysis bullosa and abnormal dentition.

    PubMed

    McGrath, J A; Gatalica, B; Li, K; Dunnill, M G; McMillan, J R; Christiano, A M; Eady, R A; Uitto, J

    1996-06-01

    Junctional epidermolysis bullosa is a heterogeneous autosomal recessively inherited blistering skin disorder associated with fragility at the dermal-epidermal junction. Previously, mutations in this condition have been described in the three genes for the anchoring filament protein laminin 5 (LAMA3, LAMB3, and LAMC2), in the gene encoding the hemidesmosome-associated beta4 integrin (ITGB4), and in the gene for the hemidesmosomal protein type XVII collagen (COL17A1/BPAG2). In this study, we report a patient with a form of junctional epidermolysis bullosa with skin fragility and dental anomalies who is a compound heterozygote for a novel combination of mutations, ie, a glycine substitution mutation in one allele and an internal duplication in the other allele of COL17A1. The patient also has two offspring, both of whom have inherited the glycine substitution mutation, whereas the other COL17A1 allele is normal. The latter individuals show no evidence of skin fragility but have marked dental abnormalities with enamel hypoplasia and pitting. The clinical phenotype of junctional epidermolysis bullosa in the proband in this family probably arises due to a combination of the glycine substitution and the internal duplication in COL17A1, whereas the dental abnormalities of her offspring may be the result of the glycine substitution in COL17A1 alone, resulting in this dominantly inherited clinical phenotype. PMID:8669466

  4. Early versus delayed minimal enteral feeding and risk for necrotizing enterocolitis in preterm growth-restricted infants with abnormal antenatal Doppler results.

    PubMed

    Karagianni, Paraskevi; Briana, Despina D; Mitsiakos, George; Elias, Anestis; Theodoridis, Theodoros; Chatziioannidis, Elias; Kyriakidou, Maria; Nikolaidis, Nikolaos

    2010-05-01

    We studied the effect of early (< or = 5 days) versus delayed (> or = 6 days) initiation of minimal enteral feeding (MEF) on the incidence of necrotizing enterocolitis (NEC) and feeding intolerance in preterm infants with intrauterine growth restriction (IUGR) and abnormal antenatal Doppler results. We performed a randomized, nonblinded pilot trial of infants receiving early or delayed MEF in addition to parenteral feeding within 48 hours of life. Demographic data, maternal preeclampsia, antenatal steroid exposure, Doppler studies, as well as cases of NEC and feeding intolerance were all recorded. Of the 84 infants enrolled, 81 completed the study: 40 received early (median age: 2 days, range: 1 to 5 days) and 41 delayed (median age: 7 days, range: 6 to 14 days) MEF. The incidence of NEC and feeding intolerance was not significantly different between groups (p = 0.353 and p = 0.533, respectively). Birth weight was an independent risk factor for NEC in both groups. Early MEF of preterm infants with IUGR and abnormal antenatal Doppler results may not have a significant effect on the incidence of NEC or feeding intolerance. Furthermore, birth weight seems to be an independent risk factor for the development of NEC, irrespectively of the timing of MEF introduction.

  5. Compound heterozygous desmoplakin mutations result in a phenotype with a combination of myocardial, skin, hair, and enamel abnormalities.

    PubMed

    Mahoney, My G; Sadowski, Sara; Brennan, Donna; Pikander, Pekka; Saukko, Pekka; Wahl, James; Aho, Heikki; Heikinheimo, Kristiina; Bruckner-Tuderman, Leena; Fertala, Andrzej; Peltonen, Juha; Uitto, Jouni; Peltonen, Sirkku

    2010-04-01

    Desmoplakin (DP) anchors the intermediate filament cytoskeleton to the desmosomal cadherins and thereby confers structural stability to tissues. In this study, we present a patient with extensive mucocutaneous blisters, epidermolytic palmoplantar keratoderma, nail dystrophy, enamel dysplasia, and sparse woolly hair. The patient died at the age of 14 years from undiagnosed cardiomyopathy. The skin showed hyperplasia and acantholysis in the mid- and lower epidermal layers, whereas the heart showed extensive fibrosis and fibrofatty replacement in both ventricles. Immunofluorescence microscopy showed a reduction in the C-terminal domain of DP in the skin and oral mucosa. Sequencing of the DP gene showed undescribed mutations in the maternal and paternal alleles. Both mutations affected exon 24 encoding the C-terminal domain. The paternal mutation, c.6310delA, leads to a premature stop codon. The maternal mutation, c.7964 C to A, results in a substitution of an aspartic acid for a conserved alanine residue at amino acid 2655 (A2655D). Structural modeling indicated that this mutation changes the electrostatic potential of the mutated region of DP, possibly altering functions that depend on intermolecular interactions. To conclude, we describe a combination of DP mutation phenotypes affecting the skin, heart, hair, and teeth. This patient case emphasizes the importance of heart examination of patients with desmosomal genodermatoses.

  6. Compound Heterozygous Desmoplakin Mutations Result in a Phenotype with a Combination of Myocardial, Skin, Hair, and Enamel Abnormalities

    PubMed Central

    Mahoney, Mỹ G.; Sadowski, Sara; Brennan, Donna; Pikander, Pekka; Saukko, Pekka; Wahl, James; Aho, Heikki; Heikinheimo, Kristiina; Bruckner-Tuderman, Leena; Fertala, Andrzej; Peltonen, Juha; Uitto, Jouni; Peltonen, Sirkku

    2014-01-01

    Desmoplakin (DP) anchors the intermediate filament cytoskeleton to the desmosomal cadherins and thereby confers structural stability to tissues. In this study, we present a patient with extensive mucocutaneous blisters, epidermolytic palmoplantar keratoderma, nail dystrophy, enamel dysplasia, and sparse woolly hair. The patient died at the age of 14 years from undiagnosed cardiomyopathy. The skin showed hyperplasia and acantholysis in the mid- and lower epidermal layers, whereas the heart showed extensive fibrosis and fibrofatty replacement in both ventricles. Immunofluorescence microscopy showed a reduction in the C-terminal domain of DP in the skin and oral mucosa. Sequencing of the DP gene showed undescribed mutations in the maternal and paternal alleles. Both mutations affected exon 24 encoding the C-terminal domain. The paternal mutation, c.6310delA, leads to a premature stop codon. The maternal mutation, c.7964 C to A, results in a substitution of an aspartic acid for a conserved alanine residue at amino acid 2655 (A2655D). Structural modeling indicated that this mutation changes the electrostatic potential of the mutated region of DP, possibly altering functions that depend on intermolecular interactions. To conclude, we describe a combination of DP mutation phenotypes affecting the skin, heart, hair, and teeth. This patient case emphasizes the importance of heart examination of patients with desmosomal genodermatoses. PMID:19924139

  7. Decreased expression of ARV1 results in cholesterol retention in the endoplasmic reticulum and abnormal bile acid metabolism.

    PubMed

    Tong, Fumin; Billheimer, Jeffrey; Shechtman, Caryn F; Liu, Ying; Crooke, Roseann; Graham, Mark; Cohen, David E; Sturley, Stephen L; Rader, Daniel J

    2010-10-29

    Endoplasmic reticulum (ER) membrane cholesterol is maintained at an optimal concentration of ∼5 mol % by the net impact of sterol synthesis, modification, and export. Arv1p was first identified in the yeast Saccharomyces cerevisiae as a key component of this homeostasis due to its probable role in intracellular sterol transport. Mammalian ARV1, which can fully complement the yeast lesion, encodes a ubiquitously expressed, resident ER protein. Repeated dosing of specific antisense oligonucleotides to ARV1 produced a marked reduction of ARV1 transcripts in liver, adipose, and to a lesser extent, intestine. This resulted in marked hypercholesterolemia, elevated serum bile acids, and activation of the hepatic farnesoid X receptor (FXR) regulatory pathway. Knockdown of ARV1 in murine liver and HepG2 cells was associated with accumulation of cholesterol in the ER at the expense of the plasma membrane and suppression of sterol regulatory element-binding proteins and their targets. These studies indicate a critical role of mammalian Arv1p in sterol movement from the ER and in the ensuing regulation of hepatic cholesterol and bile acid metabolism.

  8. Decreased Expression of ARV1 Results in Cholesterol Retention in the Endoplasmic Reticulum and Abnormal Bile Acid Metabolism*

    PubMed Central

    Tong, Fumin; Billheimer, Jeffrey; Shechtman, Caryn F.; Liu, Ying; Crooke, Roseann; Graham, Mark; Cohen, David E.; Sturley, Stephen L.; Rader, Daniel J.

    2010-01-01

    Endoplasmic reticulum (ER) membrane cholesterol is maintained at an optimal concentration of ∼5 mol % by the net impact of sterol synthesis, modification, and export. Arv1p was first identified in the yeast Saccharomyces cerevisiae as a key component of this homeostasis due to its probable role in intracellular sterol transport. Mammalian ARV1, which can fully complement the yeast lesion, encodes a ubiquitously expressed, resident ER protein. Repeated dosing of specific antisense oligonucleotides to ARV1 produced a marked reduction of ARV1 transcripts in liver, adipose, and to a lesser extent, intestine. This resulted in marked hypercholesterolemia, elevated serum bile acids, and activation of the hepatic farnesoid X receptor (FXR) regulatory pathway. Knockdown of ARV1 in murine liver and HepG2 cells was associated with accumulation of cholesterol in the ER at the expense of the plasma membrane and suppression of sterol regulatory element-binding proteins and their targets. These studies indicate a critical role of mammalian Arv1p in sterol movement from the ER and in the ensuing regulation of hepatic cholesterol and bile acid metabolism. PMID:20663892

  9. Compendium of Test Results of Recent Single Event Effect Tests Conducted by the Jet Propulsion Laboratory

    NASA Technical Reports Server (NTRS)

    McClure, Steven S.; Allen, Gregory R.; Irom, Farokh; Scheick, Leif Z.; Adell, Philippe C.; Miyahira, Tetsuo F.

    2010-01-01

    This paper reports heavy ion and proton-induced single event effect (SEE) results from recent tests for a variety of microelectronic devices. The compendium covers devices tested over the last two years by the Jet Propulsion Laboratory.

  10. Small-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2013-05-29

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and net generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of antifoam agents was assessed with most of the simulants. Orifices included round holes and

  11. NASA Fastrac Engine Gas Generator Component Test Program and Results

    NASA Technical Reports Server (NTRS)

    Dennis, Henry J., Jr.; Sanders, T.

    2000-01-01

    Low cost access to space has been a long-time goal of the National Aeronautics and Space Administration (NASA). The Fastrac engine program was begun at NASA's Marshall Space Flight Center to develop a 60,000-pound (60K) thrust, liquid oxygen/hydrocarbon (LOX/RP), gas generator-cycle booster engine for a fraction of the cost of similar engines in existence. To achieve this goal, off-the-shelf components and readily available materials and processes would have to be used. This paper will present the Fastrac gas generator (GG) design and the component level hot-fire test program and results. The Fastrac GG is a simple, 4-piece design that uses well-defined materials and processes for fabrication. Thirty-seven component level hot-fire tests were conducted at MSFC's component test stand #116 (TS116) during 1997 and 1998. The GG was operated at all expected operating ranges of the Fastrac engine. Some minor design changes were required to successfully complete the test program as development issues arose during the testing. The test program data results and conclusions determined that the Fastrac GG design was well on the way to meeting the requirements of NASA's X-34 Pathfinder Program that chose the Fastrac engine as its main propulsion system.

  12. Preliminary winter results in the thermal envelope concept test room

    SciTech Connect

    Chen, B.; Hollingsworth, E.; Holmes, W.; Maloney, J.; Pedersen, K.; Sash, R.; Thorp, J.; Wang, M.

    1980-01-01

    Within the passive solar energy field few passive techniques have caught the imagination and the attention of the public as has the continuous thermal envelope (CTE) concept. The Tom Smith residence located in Lake Tahoe has been the center of attention of a number of popular magazines. Yet despite the widespread public interest not a great deal is known concerning the actual technical performance of continuous thermal envelope systems, that is until now. Just such a CTE test room was erected during the spring and summer of 1979 at the Passive Solar Energy Test Facility located on the Omaha campus of the University of Nebraska. The CTE system has been undergoing testing since November of 1979. The CTE test room is heavily instrumented with temperature sensors and air flow meters which are located throughout, around, and under the structure. There are nearly one hundred such sensors. The results of these preliminary experiments are presented.

  13. High Stability Engine Control (HISTEC) Flight Test Results

    NASA Technical Reports Server (NTRS)

    Southwick, Robert D.; Gallops, George W.; Kerr, Laura J.; Kielb, Robert P.; Welsh, Mark G.; DeLaat, John C.; Orme, John S.

    1998-01-01

    The High Stability Engine Control (HISTEC) Program, managed and funded by the NASA Lewis Research Center, is a cooperative effort between NASA and Pratt & Whitney (P&W). The program objective is to develop and flight demonstrate an advanced high stability integrated engine control system that uses real-time, measurement-based estimation of inlet pressure distortion to enhance engine stability. Flight testing was performed using the NASA Advanced Controls Technologies for Integrated Vehicles (ACTIVE) F-15 aircraft at the NASA Dryden Flight Research Center. The flight test configuration, details of the research objectives, and the flight test matrix to achieve those objectives are presented. Flight test results are discussed that show the design approach can accurately estimate distortion and perform real-time control actions for engine accommodation.

  14. CSI computer system/remote interface unit acceptance test results

    NASA Technical Reports Server (NTRS)

    Sparks, Dean W., Jr.

    1992-01-01

    The validation tests conducted on the Control/Structures Interaction (CSI) Computer System (CCS)/Remote Interface Unit (RIU) is discussed. The CCS/RIU consists of a commercially available, Langley Research Center (LaRC) programmed, space flight qualified computer and a flight data acquisition and filtering computer, developed at LaRC. The tests were performed in the Space Structures Research Laboratory (SSRL) and included open loop excitation, closed loop control, safing, RIU digital filtering, and RIU stand alone testing with the CSI Evolutionary Model (CEM) Phase-0 testbed. The test results indicated that the CCS/RIU system is comparable to ground based systems in performing real-time control-structure experiments.

  15. Selected Test Results from the Encell Technology Nickel Iron Battery

    SciTech Connect

    Ferreira, Summer Kamal Rhodes; Baca, Wes Edmund; Avedikian, Kristan

    2014-09-01

    The performance of the Encell Nickel Iron (NiFe) battery was measured. Tests included capacity, capacity as a function of rate, capacity as a function of temperature, charge retention (28-day), efficiency, accelerated life projection, and water refill evaluation. The goal of this work was to evaluate the general performance of the Encell NiFe battery technology for stationary applications and demonstrate the chemistry's capabilities in extreme conditions. Test results have indicated that the Encell NiFe battery technology can provide power levels up to the 6C discharge rate, ampere-hour efficiency above 70%. In summary, the Encell batteries have met performance metrics established by the manufacturer. Long-term cycle tests are not included in this report. A cycle test at elevated temperature was run, funded by the manufacturer, which Encell uses to predict long-term cycling performance, and which passed their prescribed metrics.

  16. The advanced receiver 2: Telemetry test results in CTA 21

    NASA Technical Reports Server (NTRS)

    Hinedi, S.; Bevan, R.; Marina, M.

    1991-01-01

    Telemetry tests with the Advanced Receiver II (ARX II) in Compatibility Test Area 21 are described. The ARX II was operated in parallel with a Block-III Receiver/baseband processor assembly combination (BLK-III/BPA) and a Block III Receiver/subcarrier demodulation assembly/symbol synchronization assembly combination (BLK-III/SDA/SSA). The telemetry simulator assembly provided the test signal for all three configurations, and the symbol signal to noise ratio as well as the symbol error rates were measured and compared. Furthermore, bit error rates were also measured by the system performance test computer for all three systems. Results indicate that the ARX-II telemetry performance is comparable and sometimes superior to the BLK-III/BPA and BLK-III/SDA/SSA combinations.

  17. Orbiter post-tire failure and skid testing results

    NASA Technical Reports Server (NTRS)

    Daugherty, Robert H.; Stubbs, Sandy M.

    1989-01-01

    An investigation was conducted at the NASA Langley Research Center's Aircraft Landing Dynamics Facility (ALDF) to define the post-tire failure drag characteristics of the Space Shuttle Orbiter main tire and wheel assembly. Skid tests on various materials were also conducted to define their friction and wear rate characteristics under higher speed and bearing pressures than any previous tests. The skid tests were conducted to support a feasibility study of adding a skid to the orbiter strut between the main tires to protect an intact tire from failure due to overload should one of the tires fail. Roll-on-rim tests were conducted to define the ability of a standard and a modified orbiter main wheel to roll without a tire. Results of the investigation are combined into a generic model of strut drag versus time under failure conditions for inclusion into rollout simulators used to train the shuttle astronauts.

  18. Detecting Visual Function Abnormality with a Contrast-Dependent Visual Test in Patients with Type 2 Diabetes

    PubMed Central

    Jang, Yuh; Hu, Fu-Chang; Wu, Wei-Chi

    2016-01-01

    In addition to diabetic retinopathy, diabetes also causes early retinal neurodegeneration and other eye problems, which cause various types of visual deficits. This study used a computer-based visual test (Macular Multi-Function Assessment (MMFA)) to assess contrast-dependent macular visual function in patients with type 2 diabetes to collect more visual information than possible with only the visual acuity test. Because the MMFA is a newly developed test, this study first compared the agreement and discriminative ability of the MMFA and the Early Treatment Diabetic Retinopathy Study (ETDRS) contrast acuity charts. Then symbol discrimination performances of diabetic patients and controls were evaluated at 4 contrast levels using the MMFA. Seventy-seven patients and 45 controls participated. The agreement between MMFA and ETDRS scores was examined by fitting three-level linear mixed-effect models to estimate the intraclass correlation coefficients (ICCs). The estimated areas under the receiver operating characteristic (ROC) curve were used to compare the discriminative ability of diseased versus non-diseased participants between the two tests. The MMFA scores of patients and controls were compared with multiple linear regression analysis after adjusting the effects of age, sex, hypertension and cataract. Results showed that the scores of the MMFA and ETDRS tests displayed high levels of agreement and acceptable and similar discriminative ability. The MMFA performance was correlated with the severity of diabetic retinopathy. Most of the MMFA scores differed significantly between the diabetic patients and controls. In the low contrast condition, the MMFA scores were significantly lower for 006Eon-DR patients than for controls. The potential utility of the MMFA as an easy screening tool for contrast-dependent visual function and for detecting early functional visual change in patients with type 2 diabetes is discussed. PMID:27611680

  19. Detecting Visual Function Abnormality with a Contrast-Dependent Visual Test in Patients with Type 2 Diabetes.

    PubMed

    Tsai, Li-Ting; Liao, Kuo-Meng; Jang, Yuh; Hu, Fu-Chang; Wu, Wei-Chi

    2016-01-01

    In addition to diabetic retinopathy, diabetes also causes early retinal neurodegeneration and other eye problems, which cause various types of visual deficits. This study used a computer-based visual test (Macular Multi-Function Assessment (MMFA)) to assess contrast-dependent macular visual function in patients with type 2 diabetes to collect more visual information than possible with only the visual acuity test. Because the MMFA is a newly developed test, this study first compared the agreement and discriminative ability of the MMFA and the Early Treatment Diabetic Retinopathy Study (ETDRS) contrast acuity charts. Then symbol discrimination performances of diabetic patients and controls were evaluated at 4 contrast levels using the MMFA. Seventy-seven patients and 45 controls participated. The agreement between MMFA and ETDRS scores was examined by fitting three-level linear mixed-effect models to estimate the intraclass correlation coefficients (ICCs). The estimated areas under the receiver operating characteristic (ROC) curve were used to compare the discriminative ability of diseased versus non-diseased participants between the two tests. The MMFA scores of patients and controls were compared with multiple linear regression analysis after adjusting the effects of age, sex, hypertension and cataract. Results showed that the scores of the MMFA and ETDRS tests displayed high levels of agreement and acceptable and similar discriminative ability. The MMFA performance was correlated with the severity of diabetic retinopathy. Most of the MMFA scores differed significantly between the diabetic patients and controls. In the low contrast condition, the MMFA scores were significantly lower for 006Eon-DR patients than for controls. The potential utility of the MMFA as an easy screening tool for contrast-dependent visual function and for detecting early functional visual change in patients with type 2 diabetes is discussed. PMID:27611680

  20. Wind tunnel test IA300 analysis and results, volume 1

    NASA Technical Reports Server (NTRS)

    Kelley, P. B.; Beaufait, W. B.; Kitchens, L. L.; Pace, J. P.

    1987-01-01

    The analysis and interpretation of wind tunnel pressure data from the Space Shuttle wind tunnel test IA300 are presented. The primary objective of the test was to determine the effects of the Space Shuttle Main Engine (SSME) and the Solid Rocket Booster (SRB) plumes on the integrated vehicle forebody pressure distributions, the elevon hinge moments, and wing loads. The results of this test will be combined with flight test results to form a new data base to be employed in the IVBC-3 airloads analysis. A secondary objective was to obtain solid plume data for correlation with the results of gaseous plume tests. Data from the power level portion was used in conjunction with flight base pressures to evaluate nominal power levels to be used during the investigation of changes in model attitude, eleveon deflection, and nozzle gimbal angle. The plume induced aerodynamic loads were developed for the Space Shuttle bases and forebody areas. A computer code was developed to integrate the pressure data. Using simplified geometrical models of the Space Shuttle elements and components, the pressure data were integrated to develop plume induced force and moments coefficients that can be combined with a power-off data base to develop a power-on data base.

  1. Small-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2012-11-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and

  2. Oxygen desaturation during a 6-minute walk test as a predictor of maximal exercise-induced gas exchange abnormalities in sarcoidosis

    PubMed Central

    Chenivesse, Cecile; Boulanger, Sarah; Langlois, Carole; Wemeau-Stervinou, Lidwine; Perez, Thierry

    2016-01-01

    Background Common tests for evaluating gas exchange impairment have different strengths and weaknesses. Alveolar-to-arterial oxygen pressure difference (AaDO2) at peak exercise is a sensitive indicator but it cannot be measured repeatedly. Diffusing capacity of the lung for carbon monoxide (DLco) is measured at rest and may be too insensitive to predict the effects of exercise on gas exchange impairment. Oxygen desaturation during a 6-minute walk test (∆SpO2-6MWT) can be measured repeatedly, but its value in sarcoidosis is unknown. Here, we evaluated the ability of ∆SpO2-6MWT and DLco to predict gas exchange impairment during exercise in sarcoidosis. Methods This retrospective study of 130 subjects with sarcoidosis investigated the relationship between DLco, ∆SpO2-6MWT, and peak AaDO2 using correlation tests, inter-test reliability analyses, and predictive values. For the analyses of inter-test reliability and predictive values, DLco, peak AaDO2, and ∆SpO2-6MWT were considered as binary variables (normal/abnormal) according to previously defined thresholds. Results Correlation coefficients between DLco, ∆SpO2-6MWT, and peak AaDO2 were intermediate (0.53–0.67, P<0.0003) and Kappa coefficients were low (0.21–0.42, P=0.0003–0.02). DLco predicted (I) increased peak AaDO2 with a positive predictive value (PPV) of 66% and a negative predictive value (NPV) of 78% and (II) increased ∆SpO2-6MWT with a PPV at 36% and an NPV at 88%. Normal DLco was a good predictor of the absence of severe desaturation during the 6MWT (94% NPV) and at peak exercise during cardiopulmonary exercise test (CPET) (100% NPV). ∆SpO2-6MWT predicted peak AaDO2 increase with a PPV of 74% and an NPV of 60%. Conclusions In a large population of sarcoidosis patients, neither ∆SpO2-6MWT nor DLco was a good predictor of increased peak AaDO2. In contrast, normal DLco was a good predictor of the absence of severe desaturation during the 6MWT and at peak exercise during CPET.

  3. Oxygen desaturation during a 6-minute walk test as a predictor of maximal exercise-induced gas exchange abnormalities in sarcoidosis

    PubMed Central

    Chenivesse, Cecile; Boulanger, Sarah; Langlois, Carole; Wemeau-Stervinou, Lidwine; Perez, Thierry

    2016-01-01

    Background Common tests for evaluating gas exchange impairment have different strengths and weaknesses. Alveolar-to-arterial oxygen pressure difference (AaDO2) at peak exercise is a sensitive indicator but it cannot be measured repeatedly. Diffusing capacity of the lung for carbon monoxide (DLco) is measured at rest and may be too insensitive to predict the effects of exercise on gas exchange impairment. Oxygen desaturation during a 6-minute walk test (∆SpO2-6MWT) can be measured repeatedly, but its value in sarcoidosis is unknown. Here, we evaluated the ability of ∆SpO2-6MWT and DLco to predict gas exchange impairment during exercise in sarcoidosis. Methods This retrospective study of 130 subjects with sarcoidosis investigated the relationship between DLco, ∆SpO2-6MWT, and peak AaDO2 using correlation tests, inter-test reliability analyses, and predictive values. For the analyses of inter-test reliability and predictive values, DLco, peak AaDO2, and ∆SpO2-6MWT were considered as binary variables (normal/abnormal) according to previously defined thresholds. Results Correlation coefficients between DLco, ∆SpO2-6MWT, and peak AaDO2 were intermediate (0.53–0.67, P<0.0003) and Kappa coefficients were low (0.21–0.42, P=0.0003–0.02). DLco predicted (I) increased peak AaDO2 with a positive predictive value (PPV) of 66% and a negative predictive value (NPV) of 78% and (II) increased ∆SpO2-6MWT with a PPV at 36% and an NPV at 88%. Normal DLco was a good predictor of the absence of severe desaturation during the 6MWT (94% NPV) and at peak exercise during cardiopulmonary exercise test (CPET) (100% NPV). ∆SpO2-6MWT predicted peak AaDO2 increase with a PPV of 74% and an NPV of 60%. Conclusions In a large population of sarcoidosis patients, neither ∆SpO2-6MWT nor DLco was a good predictor of increased peak AaDO2. In contrast, normal DLco was a good predictor of the absence of severe desaturation during the 6MWT and at peak exercise during CPET. PMID

  4. Operational Results From a High Power Alternator Test Bed

    NASA Technical Reports Server (NTRS)

    Birchenough, Arthur; Hervol, David

    2007-01-01

    The Alternator Test Unit (ATU) in the Lunar Power System Facility (LPSF) located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio was used to simulate the operating conditions and evaluate the performance of the ATU and its interaction with various LPSF components in accordance with the current Fission Surface Power System (FSPS) requirements. The testing was carried out at the breadboard development level. These results successfully demonstrated excellent ATU power bus characteristics and rectified user load power quality during steady state and transient conditions. Information gained from this work could be used to assist the design and primary power quality considerations for a possible future FSPS. This paper describes the LPSF components and some preliminary test results.

  5. Infrared sensor system (IRSS) laboratory and field test results

    NASA Astrophysics Data System (ADS)

    Ax, George R., Jr.; Buss, James R.

    1997-08-01

    The U.S. Navy Office of Naval Research (ONR) has developed an infrared search and track (IRST) demonstrator system named the infrared sensor system (IRSS). This technology-base sensor was successfully developed and tested both in the laboratory and at-sea. IRSS now is being transitioned to the Naval Sea Systems Command (NAUSEA) IRST Engineering and Manufacturing Development (E&MD) Program, where it will serve, with appropriate modifications, as the engineering development model (EDM) and will be fielded aboard a U.S. Navy ship. This paper summarizes the process of developing and fielding IRSS, describes test results accomplished at sea during 1996, and discusses the technical and engineering lessons associated with design, development and testing of IRSS. Results are presented covering the areas of sensor component and overall system radiometrics (e.g., sensitivity and dynamic range), channel uniformity, stabilization, and optical, electrical and information (i.e., signal processing/track) resolution.

  6. FDIR Validation Test-Bed Development and Results

    NASA Astrophysics Data System (ADS)

    Karlsson, Alexander; Sakthivel, Anandhavel; Aberg, Martin; Andersson, Jan; Habinc, Sandi; Dellandrea, Brice; Nodet, Jean-Christian; Guettache, Farid; Furano, Gianluca

    2015-09-01

    This paper describes work being performed by Cobham Gaisler and Thales Alenia Space France for the European Space Agency to develop an extension of the existing avionics system testbed facility in ESTEC's Avionics Lab. The work is funded by the European Space Agency under contract 4000109928/13/NL/AK. The resulting FDIR (Fault Detection, Isolation and Recovery) testbed will allow to test concepts, strategy mechanisms and tools related to FDIR. The resulting facility will have the capabilities to support nominal and off-nominal test cases and to support tools for post testing and post simulation analysis. Ultimately the purpose of the output of this activity is to provide a tool for assessment and validation at laboratory level. This paper describes an on-going development; at the time of writing the activity is in the validation phase.

  7. Results for the Brine Evaporation Bag (BEB) Brine Processing Test

    NASA Technical Reports Server (NTRS)

    Delzeit, Lance; Flynn, Michael; Fisher, John; Shaw, Hali; Kawashima, Brian; Beeler, David; Howard, Kevin

    2015-01-01

    The recent Brine Processing Test compared the NASA Forward Osmosis Brine Dewatering (FOBD), Paragon Ionomer Water Processor (IWP), UMPQUA Ultrasonic Brine Dewatering System (UBDS), and the NASA Brine Evaporation Bag (BEB). This paper reports the results of the BEB. The BEB was operated at 70 deg C and a base pressure of 12 torr. The BEB was operated in a batch mode, and processed 0.4L of brine per batch. Two different brine feeds were tested, a chromic acid-urine brine and a chromic acid-urine-hygiene mix brine. The chromic acid-urine brine, known as the ISS Alternate Pretreatment Brine, had an average processing rate of 95 mL/hr with a specific power of 5kWhr/L. The complete results of these tests will be reported within this paper.

  8. Test results of a shower water recovery system

    NASA Technical Reports Server (NTRS)

    Verostko, Charles E.; Price, Donald F.; Garcia, Rafael; Pierson, Duane L.; Sauer, Richard L.

    1987-01-01

    A shower test was conducted recently at NASA-JSC in which waste water was reclaimed and reused. Test subjects showered in a prototype whole body shower following a protocol similar to that anticipated for Space Station. The waste water was purified using reverse osmosis followed by filtration through activated carbon and ion exchange resin beds. The reclaimed waste water was maintained free of microorganisms by using both heat and iodine. This paper discusses the test results, including the limited effectiveness of using iodine as a disinfectant and the evaluation of a Space Station candidate soap for showering. In addition, results are presented on chemical and microbial impurity content of water samples obtained from various locations in the water recovery process.

  9. GICHD Mine Dog Testing Project - Soil Sample Results No.3

    SciTech Connect

    PHELAN, JAMES M.; BARNETT, JAMES L.; BENDER, SUSAN FAE ANN; ARCHULETA, LUISA M.

    2003-03-01

    A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan and Bosnia containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the third batch of soils received. This batch contained samples from Kharga, Afghanistan collected in October 2002.

  10. GICHD mine dog testing project - soil sample results #4.

    SciTech Connect

    Barnett, James L.; Phelan, James M.; Archuleta, Luisa M.; Wood, Tyson B.; Donovan, Kelly L.; Bender, Susan Fae Ann

    2003-08-01

    A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan and Bosnia containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the fourth batch of soils received. This batch contained samples from Kharga, Afghanistan collected in April 2003 and Sarajevo, Bosnia collected in May 2003.

  11. Model NbTi Helical Solenoid Fabrication and Test Results

    SciTech Connect

    Andreev, N.; Barzi, E.; Chlachidze, G.; Evbota, D.; Kashikhin, V.S.; Kashikhin, V.V.; Lamm, M.J.; Makarov, A.; Novitski, I.; Orris, D.F.; Tartaglia, M.A.; /Fermilab

    2011-09-01

    A program to develop model magnets for a helical cooling channel is under way at Fermilab. In the first steps of a planned sequence of magnets, two four-coil helical solenoid models with 300 mm aperture have been fabricated and tested. These two models, HSM01 and HSM02, used insulated NbTi Rutherford cable wound onto stainless steel rings with spliceless transitions between coils. Strip heaters were included for quench protection of each coil, and the coils were epoxy-impregnated after winding inside the support structures. Based on the results of the first model the second model was made using a cable with optimized cross-section, improved winding and epoxy-impregnation procedures, enhanced ground insulation, and included heat exchange tubing for a test of conduction cooling. We report on the results and lessons learned from fabrication and tests of these two models.

  12. GICHD mine dog testing project : soil sample results #5.

    SciTech Connect

    Barnett, James L.; Phelan, James M.; Archuleta, Luisa M.; Donovan, Kelly L.; Bender, Susan Fae Ann

    2004-01-01

    A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the fifth batch of soils received. This batch contained samples from Kharga, Afghanistan collected in June 2003.

  13. Potential for false positive HIV test results with the serial rapid HIV testing algorithm

    PubMed Central

    2012-01-01

    Background Rapid HIV tests provide same-day results and are widely used in HIV testing programs in areas with limited personnel and laboratory infrastructure. The Uganda Ministry of Health currently recommends the serial rapid testing algorithm with Determine, STAT-PAK, and Uni-Gold for diagnosis of HIV infection. Using this algorithm, individuals who test positive on Determine, negative to STAT-PAK and positive to Uni-Gold are reported as HIV positive. We conducted further testing on this subgroup of samples using qualitative DNA PCR to assess the potential for false positive tests in this situation. Results Of the 3388 individuals who were tested, 984 were HIV positive on two consecutive tests, and 29 were considered positive by a tiebreaker (positive on Determine, negative on STAT-PAK, and positive on Uni-Gold). However, when the 29 samples were further tested using qualitative DNA PCR, 14 (48.2%) were HIV negative. Conclusion Although this study was not primarily designed to assess the validity of rapid HIV tests and thus only a subset of the samples were retested, the findings show a potential for false positive HIV results in the subset of individuals who test positive when a tiebreaker test is used in serial testing. These findings highlight a need for confirmatory testing for this category of individuals. PMID:22429706

  14. 40 CFR 211.212-5 - Reporting of test results.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Reporting of test results. 211.212-5... with applicable regulations under 40 CFR Part 211 et seq. All the data reported are true and accurate... repromulgate or modify the reporting requirements at that time. (Sec. 13, Pub. L. 92-574, 86 Stat. 1244 (42...

  15. 40 CFR 211.212-5 - Reporting of test results.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Noise Control Act of 1972 and the regulations published under it. (authorized representative) If the... Section 211.212-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING Hearing Protective Devices § 211.212-5 Reporting of test results....

  16. 40 CFR 211.212-5 - Reporting of test results.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Noise Control Act of 1972 and the regulations published under it. (authorized representative) If the... Section 211.212-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING Hearing Protective Devices § 211.212-5 Reporting of test results....

  17. 40 CFR 211.212-5 - Reporting of test results.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Noise Control Act of 1972 and the regulations published under it. (authorized representative) If the... Section 211.212-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING Hearing Protective Devices § 211.212-5 Reporting of test results....

  18. 49 CFR 229.313 - Product testing results and records.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Product testing results and records. 229.313 Section 229.313 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics §...

  19. 49 CFR 229.313 - Product testing results and records.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Product testing results and records. 229.313 Section 229.313 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics §...

  20. 49 CFR 229.313 - Product testing results and records.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Product testing results and records. 229.313 Section 229.313 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Electronics §...

  1. 40 CFR 211.212-5 - Reporting of test results.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... with applicable regulations under 40 CFR Part 211 et seq. All the data reported are true and accurate... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Reporting of test results. 211.212-5 Section 211.212-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE...

  2. Recent results on the RIA test in IGR reactor

    SciTech Connect

    Asmolov, V.; Yegorova, L.

    1997-01-01

    At the 23d WRSM meeting the data base characterizing results of VVER high burnup fuel rods tests under reactivity-initiated accident (RIA) conditions was presented. Comparison of PWR and VVER failure thresholds was given also. Additional analysis of the obtained results was being carried out during 1996. The results of analysis show that the two different failure mechanisms were observed for PWR and VVER fuel rods. Some factors which can be as the possible reasons of these differences are presented. First of them is the state of preirradiated cladding. Published test data for PWR high burnup fuel rods demonstrated that the PWR high burnup fuel rods failed at the RIA test are characterized by very high level of oxidation and hydriding for the claddings. Corresponding researches were performed at Institute of Atomic Reactors (RLAR, Dimitrovgrad, Russia) for large set of VVER high burnup fuel rods. Results of these investigations show that preirradiated commercial Zr-1%Nb claddings practically keep their initial levels of oxidation and H{sub 2} concentration. Consequently the VVER preirradiated cladding must keep the high level of mechanical properties. The second reason leading to differences between failure mechanisms for two types of high burnup fuel rods can be the test conditions. Now such kind of analysis have been performed by two methods.

  3. 42 CFR 493.1281 - Standard: Comparison of test results.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Standard: Comparison of test results. 493.1281 Section 493.1281 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... following relevant criteria, when available: (1) Patient age. (2) Sex. (3) Diagnosis or pertinent...

  4. 42 CFR 493.1281 - Standard: Comparison of test results.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Standard: Comparison of test results. 493.1281 Section 493.1281 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... following relevant criteria, when available: (1) Patient age. (2) Sex. (3) Diagnosis or pertinent...

  5. SIMS prototype system 3 test results: Engineering analysis

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The results obtained during testing of a closed hydronic drain down solar system designed for space and hot water heating is presented. Data analysis is included which documents the system performance and verifies the suitability of SIMS Prototype System 3 for field installation.

  6. Irving Independent School District: Standardized Test Results, 1985-86.

    ERIC Educational Resources Information Center

    Irving Independent School District, TX.

    The results are presented of district-wide standardized testing in the Irving (Texas) Independent School District for the 1985-86 school year. This was the first year in which the Texas Educational Assessment of Minimum Skills (TEAMS) was implemented. It was administered to students in odd-numbered grades, whereas all other students took the…

  7. [Endocrine abnormalities in HIV infections].

    PubMed

    Verges, B; Chavanet, P; Desgres, J; Kisterman, J P; Waldner, A; Vaillant, G; Portier, H; Brun, J M; Putelat, R

    The finding of endocrine gland lesions at pathological examination in AIDS and reports of several cases of endocrine disease in patients with this syndrome have prompted us to study endocrine functions in 63 patients (51 men, 12 women) with HIV-1 infection. According to the Center for Disease Control (CDC) classification system, 13 of these patients were stage CDC II, 27 stage CDC III and 23 stage CDC IV. We explored the adrenocortical function (ACTH, immediate tetracosactrin test) and the thyroid function (free T3 and T4 levels, TRH on TSH test) in all 63 patients. The hypothalamic-pituitary-gonadal axis (testosterone levels, LHRH test) and prolactin secretion (THR test) were explored in the 51 men. The results obtained showed early peripheral testicular insufficiency at stage CDC II and early pituitary gland abnormalities with hypersecretion of ACTH and prolactin also at stage CDC II. On the other hand, adrenocortical and pituitary abnormalities were not frequently found. The physiopathology of the endocrine abnormalities observed in HIV-1-infected patients remains unclear, but one may suspect that it involves interleukin-1 since this protein factor has recently been shown to stimulate the corticotropin-releasing hormone secretion and to act directly on the glycoprotein capsule of the virus (gp 120) whose structure is similar to that of some neurohormones.

  8. Evaluation of dense gas dispersion test results. Final report

    SciTech Connect

    Sheesley, D.

    1997-03-01

    A national Spill Test Facility (STF) program dedicated to public safety in the use and transport of fuels and other chemicals was established by Congress. The program is charged with developing technology for spill prediction, prevention, and mitigation. The Spill Test Facility, located northeast of Mercury, Nevada, is to be used for research leading to the development of tools for the protection of workers, the public, and the environment in response to accidental spills of hazardous materials. Public laws, including the Clean Air Act Amendments (CAAA) of 1990, also require that the Secretary of Energy make the STF and STF test data available to industry, academia, and other government agencies. The objective of this subtask is to produce a data base allowing the chemical and fuel accident responder to access emergency management information quickly and efficiently. The work has involved (1) archiving spill test facility results from the US Department of Energy (DOE) Liquefied Gaseous Fuels Spill Test Facility (LGFSTF) at the Nevada National Test Site, (2) updating the data base on spill control technology documents and data, and (3) transferring this information to the public.

  9. In-orbit test results of the first SILEX terminal

    NASA Astrophysics Data System (ADS)

    Tolker-Nielsen, Toni; Demelenne, Benoit; Desplats, Eric

    1999-04-01

    The Semi conductor Inter satellite Link EXperiment, SILEX, consists of two terminals, one terminal embarked on the French LEO observation satellite SPOT4 and one terminal embarked on the ESA GEO telecommunication satellite ARTEMIS. The objective of SILEX is first to perform optical communication experiments in orbit and then on an operational basis transmit SPOT4 earth observation data to ARTEMIS, which will relay the data to ground via its Ka band feeder link. SPOT4 with the SILEX terminal was successfully launched on 22nd March 1998. While waiting for the counter terminal on ARTEMIS, a test program has been undertaken to characterize the performances without a counter terminal. The test program involves CCD calibrations, laser diode calibrations, emit/transmit co- alignment calibrations, measurement of point ahead mechanism accuracy, star acquisitions and tracking, sensitivity to sunlight, and characterization of platform/terminal dynamic interaction. The paper reports on test results of the in orbit testing, with comparison to similar ground testing and predictions. The conclusion of the test program is that the first optical communication terminal in orbit is in very good health and that the demonstrated performances are stable and considerably better than the expected.

  10. Developing a flammability test system for sunglasses: results

    NASA Astrophysics Data System (ADS)

    Magri, Renan; Ventura, Liliane

    2015-03-01

    Sunglasses popularity has increased tremendously. This fact has further led to the need of certificating sunglasses accordingly to the standard NBR 15111 to protect consumers from damages and secondary hazards caused by sunglasses use. The ongoing need comes at the expense that none certification institution in Brazil performs all tests procedures required by the NBR 15111. This manuscript presents the development of a flammability test system for sunglasses and the assessments results. The equipment for testing flammability developed is made of an electrical furnace with a thermocouple and electronic system that maintains the temperature in 650 ºC. This furnace heats a steel rod used for testing flammability. A steel cable connected to a linear actuator drives the rod. The main control system is based on an ARM Cortex M0 microcontroller and we developed a PC interface in LabView to acquire data and store it. The equipment built also has a control panel with a push button, status LEDs and temperature indicator. We performed flammability tests in 45 sunglasses: 45 lenses and 45 frames using the equipment described. None of the samples ignited or continued to glow when the test has finished, however, all polycarbonate samples were melted in the contact region with the steel rod. All samples complied with the NBR 15111. The proof argues that the polycarbonate is extremely resistant to ignition.

  11. Large-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect

    Schonewill, Philip P.; Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.; Kurath, Dean E.; Adkins, Harold E.; Billing, Justin M.; Burns, Carolyn A.; Davis, James M.; Enderlin, Carl W.; Fischer, Christopher M.; Jenks, Jeromy WJ; Lukins, Craig D.; MacFarlan, Paul J.; Shutthanandan, Janani I.; Smith, Dennese M.

    2012-12-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and

  12. Graphite electrode arc melter demonstration Phase 2 test results

    SciTech Connect

    Soelberg, N.R.; Chambers, A.G.; Anderson, G.L.; O`Connor, W.K.; Oden, L.L.; Turner, P.C.

    1996-06-01

    Several U.S. Department of Energy organizations and the U.S. Bureau of Mines have been collaboratively conducting mixed waste treatment process demonstration testing on the near full-scale graphite electrode submerged arc melter system at the Bureau`s Albany (Oregon) Research Center. An initial test series successfully demonstrated arc melter capability for treating surrogate incinerator ash of buried mixed wastes with soil. The conceptual treatment process for that test series assumed that buried waste would be retrieved and incinerated, and that the incinerator ash would be vitrified in an arc melter. This report presents results from a recently completed second series of tests, undertaken to determine the ability of the arc melter system to stably process a wide range of {open_quotes}as-received{close_quotes} heterogeneous solid mixed wastes containing high levels of organics, representative of the wastes buried and stored at the Idaho National Engineering Laboratory (INEL). The Phase 2 demonstration test results indicate that an arc melter system is capable of directly processing these wastes and could enable elimination of an up-front incineration step in the conceptual treatment process.

  13. Space Launch System Base Heating Test: Experimental Operations & Results

    NASA Technical Reports Server (NTRS)

    Dufrene, Aaron; Mehta, Manish; MacLean, Matthew; Seaford, Mark; Holden, Michael

    2016-01-01

    NASA's Space Launch System (SLS) uses four clustered liquid rocket engines along with two solid rocket boosters. The interaction between all six rocket exhaust plumes will produce a complex and severe thermal environment in the base of the vehicle. This work focuses on a recent 2% scale, hot-fire SLS base heating test. These base heating tests are short-duration tests executed with chamber pressures near the full-scale values with gaseous hydrogen/oxygen engines and RSRMV analogous solid propellant motors. The LENS II shock tunnel/Ludwieg tube tunnel was used at or near flight duplicated conditions up to Mach 5. Model development was based on the Space Shuttle base heating tests with several improvements including doubling of the maximum chamber pressures and duplication of freestream conditions. Test methodology and conditions are presented, and base heating results from 76 runs are reported in non-dimensional form. Regions of high heating are identified and comparisons of various configuration and conditions are highlighted. Base pressure and radiometer results are also reported.

  14. Results of MACE tests M0 and M1

    SciTech Connect

    Spencer, B.W.; Farmer, M.T.; Armstrong, D.R.; Kilsdonk, D.J.; Aeschlimann, R.W. ); Fischer, M. )

    1992-01-01

    This document discusses the Melt Attack and Coolability Experiment (MACE) Program underway at Argonne National Laboratory under ACE/EPRI sponsorship. The program addresses the efficacy of water to terminate an accident situation if melt progression were to result in a molten core/concrete interaction (MCCI) in the reactor containment. Large-scale experiments are being conducted in parallel with related modeling efforts, involving the addition of water to an MCI already underway. The experiments utilize UO{sub 2}/ZrO{sub 2}/Zr corium mixtures, direct electrical heating for simulation of decay heating, and various types of concrete basemats. Currently the tests involve 430 kg corium mass, 25 cm depth, in a 50 cm square test section. Test MO was a successful scoping test, but the first full size test, Ml, failed to achieve melt-water contact owing to existence of a preexisting bridge crust of corium charge. A heat flux of 3.5 MW/m{sup 2} was measured in MO which removed energy from the corium pool equivalent to its entire heat of solidification prior to abatement by formation of an interfacial crust. The crust subsequently limited heat extraction to 600 kW/m{sup 2} and less. Both tests MO and Ml revealed physical evidence of large pool swelling events which resulted in extrusion (and ejection) of melt into water above the crust, significantly increasing the overall quench and reducing the remaining melt in contact with the concrete. Furthermore, test Ml provided evidence of occasional burst mode'' ablation events and one additional important benefit of overlying water -- aerosol capture.

  15. Results of MACE tests M0 and M1

    SciTech Connect

    Spencer, B.W.; Farmer, M.T.; Armstrong, D.R.; Kilsdonk, D.J.; Aeschlimann, R.W.; Fischer, M.

    1992-04-01

    This document discusses the Melt Attack and Coolability Experiment (MACE) Program underway at Argonne National Laboratory under ACE/EPRI sponsorship. The program addresses the efficacy of water to terminate an accident situation if melt progression were to result in a molten core/concrete interaction (MCCI) in the reactor containment. Large-scale experiments are being conducted in parallel with related modeling efforts, involving the addition of water to an MCI already underway. The experiments utilize UO{sub 2}/ZrO{sub 2}/Zr corium mixtures, direct electrical heating for simulation of decay heating, and various types of concrete basemats. Currently the tests involve 430 kg corium mass, 25 cm depth, in a 50 cm square test section. Test MO was a successful scoping test, but the first full size test, Ml, failed to achieve melt-water contact owing to existence of a preexisting bridge crust of corium charge. A heat flux of 3.5 MW/m{sup 2} was measured in MO which removed energy from the corium pool equivalent to its entire heat of solidification prior to abatement by formation of an interfacial crust. The crust subsequently limited heat extraction to 600 kW/m{sup 2} and less. Both tests MO and Ml revealed physical evidence of large pool swelling events which resulted in extrusion (and ejection) of melt into water above the crust, significantly increasing the overall quench and reducing the remaining melt in contact with the concrete. Furthermore, test Ml provided evidence of occasional ``burst mode`` ablation events and one additional important benefit of overlying water -- aerosol capture.

  16. GPM Avionics Module Heat Pipes Design and Performance Test Results

    NASA Technical Reports Server (NTRS)

    Ottenstein, Laura; DeChristopher, Mike

    2011-01-01

    The Global Precipitation Measurement (GPM) mission is an international network of satellites that provide the next-generation global observations of rain and snow. The GPM core satellite carries an advanced radar / radiometer system to measure precipitation from space and serve as a reference standard to unify precipitation measurements from a constellation of research and operational satellites. Through improved measurements of precipitation globally, the GPM mission will help to advance our understanding of Earth's water and energy cycle, improve forecasting of extreme events that cause natural hazards and disasters, and extend current capabilities in using accurate and timely information of precipitation to directly benefit society. The avionics module on the core satellite contains a number of electronics boxes which are cooled by a network of aluminum/ammonia heat pipes and a honeycomb radiator which contains thirteen embedded aluminum/ammonia heat pipes. All heat pipes were individually tested by the vendor (Advanced Cooling Technologies, Inc.) prior to delivery. Following delivery to NASA, the flight avionics radiator and the flight spare transport heat pipes were mounted to flight-like test structure and a system level thermal vacuum test was performed. This test, which used simulators in place of all electronics boxes, was done to verify the operation of the thermal control system as a whole. This presentation will discuss the design of the avionics module heat pipes, and then discuss performance tests results for the individual heat pipes prior to delivery and for the system level thermal vacuum test. All heat pipes met their performance requirements. However, it was found that the power was too low in some instances to start all of the smaller radiator spreader heat pipes when they were tested in a reflux configuration (which is the nominal test configuration). Although this lowered the efficiency of the radiator somewhat, it did not impact the operating

  17. A new diagnostic workflow for patients with mental retardation and/or multiple congenital abnormalities: test arrays first.

    PubMed

    Gijsbers, Antoinet C J; Lew, Janet Y K; Bosch, Cathy A J; Schuurs-Hoeijmakers, Janneke H M; van Haeringen, Arie; den Hollander, Nicolette S; Kant, Sarina G; Bijlsma, Emilia K; Breuning, Martijn H; Bakker, Egbert; Ruivenkamp, Claudia A L

    2009-11-01

    High-density single-nucleotide polymorphism (SNP) genotyping technology enables extensive genotyping as well as the detection of increasingly smaller chromosomal aberrations. In this study, we assess molecular karyotyping as first-round analysis of patients with mental retardation and/or multiple congenital abnormalities (MR/MCA). We used different commercially available SNP array platforms, the Affymetrix GeneChip 262K NspI, the Genechip 238K StyI, the Illumina HumanHap 300 and HumanCNV 370 BeadChip, to detect copy number variants (CNVs) in 318 patients with unexplained MR/MCA. We found abnormalities in 22.6% of the patients, including six CNVs that overlap known microdeletion/duplication syndromes, eight CNVs that overlap recently described syndromes, 63 potentially pathogenic CNVs (in 52 patients), four large segments of homozygosity and two mosaic trisomies for an entire chromosome. This study shows that high-density SNP array analysis reveals a much higher diagnostic yield as that of conventional karyotyping. SNP arrays have the potential to detect CNVs, mosaics, uniparental disomies and loss of heterozygosity in one experiment. We, therefore, propose a novel diagnostic approach to all MR/MCA patients by first analyzing every patient with an SNP array instead of conventional karyotyping.

  18. Long Term Corrosion/Degradation Test Six Year Results

    SciTech Connect

    M. K. Adler Flitton; C. W. Bishop; M. E. Delwiche; T. S. Yoder

    2004-09-01

    The Subsurface Disposal Area (SDA) of the Radioactive Waste Management Complex (RWMC) located at the Idaho National Engineering and Environmental Laboratory (INEEL) contains neutron-activated metals from non-fuel, nuclear reactor core components. The Long-Term Corrosion/Degradation (LTCD) Test is designed to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements to the environment. The test is using two proven, industry-standard methods—direct corrosion testing using metal coupons, and monitored corrosion testing using electrical/resistance probes—to determine corrosion rates for various metal alloys generally representing the metals of interest buried at the SDA, including Type 304L stainless steel, Type 316L stainless steel, Inconel 718, Beryllium S200F, Aluminum 6061, Zircaloy-4, low-carbon steel, and Ferralium 255. In the direct testing, metal coupons are retrieved for corrosion evaluation after having been buried in SDA backfill soil and exposed to natural SDA environmental conditions for times ranging from one year to as many as 32 years, depending on research needs and funding availability. In the monitored testing, electrical/resistance probes buried in SDA backfill soil will provide corrosion data for the duration of the test or until the probes fail. This report provides an update describing the current status of the test and documents results to date. Data from the one-year and three-year results are also included, for comparison and evaluation of trends. In the six-year results, most metals being tested showed extremely low measurable rates of general corrosion. For Type 304L stainless steel, Type 316L stainless steel, Inconel 718, and Ferralium 255, corrosion rates fell in the range of “no reportable” to 0.0002 mils per year (MPY). Corrosion rates for Zircaloy-4 ranged from no measurable corrosion to 0.0001 MPY. These rates are two orders of magnitude lower than those specified in

  19. The frequency of missed test results and associated treatment delays in a highly computerized health system

    PubMed Central

    Wahls, Terry L; Cram, Peter M

    2007-01-01

    Background: Diagnostic errors associated with the failure to follow up on abnormal diagnostic studies ("missed results") are a potential cause of treatment delay and a threat to patient safety. Few data exist concerning the frequency of missed results and associated treatment delays within the Veterans Health Administration (VA). Objective: The primary objective of the current study was to assess the frequency of missed results and resulting treatment delays encountered by primary care providers in VA clinics. Methods: An anonymous on-line survey of primary care providers was conducted as part of the health systems ongoing quality improvement programs. We collected information from providers concerning their clinical effort (e.g., number of clinic sessions, number of patient visits per session), number of patients with missed abnormal test results, and the number and types of treatment delays providers encountered during the two week period prior to administration of our survey. Results: The survey was completed by 106 out of 198 providers (54 percent response rate). Respondents saw and average of 86 patients per 2 week period. Providers encountered 64 patients with missed results during the two week period leading up to the study and 52 patients with treatment delays. The most common missed results included imaging studies (29 percent), clinical laboratory (22 percent), anatomic pathology (9 percent), and other (40 percent). The most common diagnostic delays were cancer (34 percent), endocrine problems (26 percent), cardiac problems (16 percent), and others (24 percent). Conclusion: Missed results leading to clinically important treatment delays are an important and likely underappreciated source of diagnostic error. PMID:17519017

  20. Salmonella mutagenicity tests. IV. Results from the testing of 300 chemicals

    SciTech Connect

    Zeiger, E.; Anderson, B.; Haworth, S.; Lawlor, T.; Mortelmans, K.

    1988-01-01

    Three hundred chemicals were tested for mutagenicity, under code, in Salmonella typhimurium, using a preincubation protocol. All tests were performed in the absence of exogenous metabolic activation, and in the presence of liver S-9 from Aroclor-induced male Sprague-Dawley rats and Syrian hamsters. The results and data from these tests are presented.

  1. Correlation of composite material test results with finite element analysis

    NASA Astrophysics Data System (ADS)

    Guƫu, M.

    2016-08-01

    In this paper are presented some aspects regarding the method of simulation of composite materials testing with finite element analysis software. There were simulated tensile and shear tests of specimens manufactured from glass fiber reinforced polyester. For specimens manufacturing two types of fabrics were used: unidirectional and bidirectional. Experimentally determined elastic properties of composite material were used as input data. Modeling of composite architecture of the specimens was performed with ANSYS Composite PrepPost software. Finite element analysis stresses and strains on strain gauges bonding area were considered and compared with the real values in a diagram. After results comparison, potential causes of deviations were identified.

  2. Thermosyphon Flooding in Reduced Gravity Environments Test Results

    NASA Technical Reports Server (NTRS)

    Gibson, Marc A.; Jaworske, Donald A.; Sanzi, Jim; Ljubanovic, Damir

    2013-01-01

    The condenser flooding phenomenon associated with gravity aided two-phase thermosyphons was studied using parabolic flights to obtain the desired reduced gravity environment (RGE). The experiment was designed and built to test a total of twelve titanium water thermosyphons in multiple gravity environments with the goal of developing a model that would accurately explain the correlation between gravitational forces and the maximum axial heat transfer limit associated with condenser flooding. Results from laboratory testing and parabolic flights are included in this report as part I of a two part series. The data analysis and correlations are included in a follow on paper.

  3. Test results of the HIRFL-CSR cluster target

    NASA Astrophysics Data System (ADS)

    Cai, Xiaohong; Lu, Rongchun; Shao, Caojie; Ruan, Fangfang; Yu, Deyang; Li, Mingsheng; Zhan, Wenlong; Torpokov, D. K.; Nikolenko, D.

    2005-12-01

    The HIRFL-CSR internal target can operate in two modes: cluster target mode and polarized target mode. The cluster target may provide the gas target of H 2, N 2, inert gases and small molecular gases. The test experiments have been done for H 2, N 2 and Ar gases. The target thicknesses of 6.6×10 12, 1.2×10 13 and 1.0×10 13 atoms/cm 2 are obtained for H 2, N 2 and Ar gases, respectively. In this paper, the structure and the test results of the HIRFL-CSR cluster target system are reported.

  4. The Results of Tests of the MICE Spectrometer Solenoids

    SciTech Connect

    Green, Michael A.; Virostek, Steve P.

    2009-10-19

    The Muon Ionization Cooling Experiment (MICE) spectrometer solenoid magnets will be the first magnets to be installed within the MICE cooling channel. The spectrometer magnets are the largest magnets in both mass and surface area within the MICE ooling channel. Like all of the other magnets in MICE, the spectrometer solenoids are kept cold using 1.5 W (at 4.2 K) pulse tube coolers. The MICE spectrometer solenoid is quite possibly the largest magnet that has been cooled using small coolers. Two pectrometer magnets have been built and tested. This report discusses the results of current and cooler tests of both magnets.

  5. Analysis of skin patch test results and metalloproteinase-2 levels in a patient with contact dermatitis

    PubMed Central

    Czajkowski, Rafał; Kowaliszyn, Bogna; Żbikowska-Gotz, Magdalena; Bartuzi, Zbigniew

    2015-01-01

    Introduction The complex course of skin reactions that contact eczema involves is due in part to abnormalities of the extracellular matrix function. Proteins that degrade extracellular matrix components include metalloproteinases (MMP), which are divided into subcategories depending on the chemical structure and substrate specificity. Aim To analyse patch test results in contact dermatitis patients and to assess MMP-2 levels during skin lesion exacerbation and remission. Material and methods Fifty patients suffering from contact eczema were qualified to the study and 20 healthy volunteers as a control group. The study group patients had epidermal skin tests performed with the “European Standard” set. To assess the MMP-2 level in serum, venous blood was drawn, twice from study group patients – during contact dermatitis exacerbation and remission periods – and once from control group patients. Assessment of MMP-2 in serum was done with ELISA immunoassay. To verify the proposed hypotheses, parametric and nonparametric significance tests were used. Results Hands were the most frequent location of contact dermatitis. Nickel (II) sulphate was the most frequent sensitizing substance. Mean MMP-2 levels were statistically higher in the study group both in contact dermatitis exacerbation and remission periods than in the control group. There was no statistically significant difference between MMP-2 levels and skin patch test results. Conclusions Nickel is one of the most allergenic contact allergens in patients with contact dermatitis. Metalloproteinase-2 is a good marker of contact dermatitis in various stages of the disease. PMID:26161054

  6. Interim Guidance for Interpretation of Zika Virus Antibody Test Results.

    PubMed

    Rabe, Ingrid B; Staples, J Erin; Villanueva, Julie; Hummel, Kimberly B; Johnson, Jeffrey A; Rose, Laura; Hills, Susan; Wasley, Annemarie; Fischer, Marc; Powers, Ann M

    2016-06-03

    Zika virus is a single-stranded RNA virus in the genus Flavivirus and is closely related to dengue, West Nile, Japanese encephalitis, and yellow fever viruses (1,2). Among flaviviruses, Zika and dengue virus share similar symptoms of infection, transmission cycles, and geographic distribution. Diagnostic testing for Zika virus infection can be accomplished using both molecular and serologic methods. For persons with suspected Zika virus disease, a positive real-time reverse transcription-polymerase chain reaction (rRT-PCR) result confirms Zika virus infection, but a negative rRT-PCR result does not exclude infection (3-7). In these cases, immunoglobulin (Ig) M and neutralizing antibody testing can identify additional recent Zika virus infections (6,7). However, Zika virus antibody test results can be difficult to interpret because of cross-reactivity with other flaviviruses, which can preclude identification of the specific infecting virus, especially when the person previously was infected with or vaccinated against a related flavivirus (8). This is important because the results of Zika and dengue virus testing will guide clinical management. Pregnant women with laboratory evidence of Zika virus infection should be evaluated and managed for possible adverse pregnancy outcomes and be reported to the U.S. Zika Pregnancy Registry or the Puerto Rico Zika Active Pregnancy Surveillance System for clinical follow-up (9,10). All patients with clinically suspected dengue should have proper management to reduce the risk for hemorrhage and shock (11). If serologic testing indicates recent flavivirus infection that could be caused by either Zika or dengue virus, patients should be clinically managed for both infections because they might have been infected with either virus.

  7. Interim Guidance for Interpretation of Zika Virus Antibody Test Results.

    PubMed

    Rabe, Ingrid B; Staples, J Erin; Villanueva, Julie; Hummel, Kimberly B; Johnson, Jeffrey A; Rose, Laura; Hills, Susan; Wasley, Annemarie; Fischer, Marc; Powers, Ann M

    2016-01-01

    Zika virus is a single-stranded RNA virus in the genus Flavivirus and is closely related to dengue, West Nile, Japanese encephalitis, and yellow fever viruses (1,2). Among flaviviruses, Zika and dengue virus share similar symptoms of infection, transmission cycles, and geographic distribution. Diagnostic testing for Zika virus infection can be accomplished using both molecular and serologic methods. For persons with suspected Zika virus disease, a positive real-time reverse transcription-polymerase chain reaction (rRT-PCR) result confirms Zika virus infection, but a negative rRT-PCR result does not exclude infection (3-7). In these cases, immunoglobulin (Ig) M and neutralizing antibody testing can identify additional recent Zika virus infections (6,7). However, Zika virus antibody test results can be difficult to interpret because of cross-reactivity with other flaviviruses, which can preclude identification of the specific infecting virus, especially when the person previously was infected with or vaccinated against a related flavivirus (8). This is important because the results of Zika and dengue virus testing will guide clinical management. Pregnant women with laboratory evidence of Zika virus infection should be evaluated and managed for possible adverse pregnancy outcomes and be reported to the U.S. Zika Pregnancy Registry or the Puerto Rico Zika Active Pregnancy Surveillance System for clinical follow-up (9,10). All patients with clinically suspected dengue should have proper management to reduce the risk for hemorrhage and shock (11). If serologic testing indicates recent flavivirus infection that could be caused by either Zika or dengue virus, patients should be clinically managed for both infections because they might have been infected with either virus. PMID:27254248

  8. Cell free DNA testing-interpretation of results using an online calculator.

    PubMed

    Grace, Matthew R; Hardisty, Emily; Green, Noah S; Davidson, Emily; Stuebe, Alison M; Vora, Neeta L

    2015-07-01

    All pregnant women, regardless of age, should be offered screening or invasive testing for chromosomal abnormalities at <20 weeks' gestation. Noninvasive prenatal screening for fetal aneuploidy with the use of cell-free DNA (cfDNA) is a screening method that offers high sensitivity and specificity in validation studies and has reduced the need for unnecessary invasive procedures. Laboratories often advertise and report a test's sensitivity and specificity as a means to describe the test's accuracy. The positive predictive value (PPV) of a screening test (the proportion of positive results that are truly positive) is a function of the prevalence of the condition in a population and often is not reported in direct-to-patient advertising. False-positive cfDNA screening tests have been reported, and there is evidence that some women are deciding to terminate their pregnancy without confirmatory testing. We believe that laboratories should disclose the patient-specific PPV of cfDNA screening for aneuploidy on result reports. To assist with counseling patients about the benefits, risks, and limitations of aneuploidy screening with the use of cfDNA and to demonstrate the relationship between an a priori risk and PPV, we developed a web-based calculator to estimate the PPV of the 4 commercially available cfDNA testing platforms for which data have been published. Estimates are made with the use of a patient's age and gestational age-related risk of trisomy 21, 18 and 13 or an a priori risk that is based on other findings. This web-based calculator is an aid for providers and genetic counselors to illustrate the relationship between disease prevalence and a test's PPV. It has enhanced our counseling of patients both before they elect noninvasive prenatal screening and after they receive a positive result.

  9. Cell free DNA testing-interpretation of results using an online calculator.

    PubMed

    Grace, Matthew R; Hardisty, Emily; Green, Noah S; Davidson, Emily; Stuebe, Alison M; Vora, Neeta L

    2015-07-01

    All pregnant women, regardless of age, should be offered screening or invasive testing for chromosomal abnormalities at <20 weeks' gestation. Noninvasive prenatal screening for fetal aneuploidy with the use of cell-free DNA (cfDNA) is a screening method that offers high sensitivity and specificity in validation studies and has reduced the need for unnecessary invasive procedures. Laboratories often advertise and report a test's sensitivity and specificity as a means to describe the test's accuracy. The positive predictive value (PPV) of a screening test (the proportion of positive results that are truly positive) is a function of the prevalence of the condition in a population and often is not reported in direct-to-patient advertising. False-positive cfDNA screening tests have been reported, and there is evidence that some women are deciding to terminate their pregnancy without confirmatory testing. We believe that laboratories should disclose the patient-specific PPV of cfDNA screening for aneuploidy on result reports. To assist with counseling patients about the benefits, risks, and limitations of aneuploidy screening with the use of cfDNA and to demonstrate the relationship between an a priori risk and PPV, we developed a web-based calculator to estimate the PPV of the 4 commercially available cfDNA testing platforms for which data have been published. Estimates are made with the use of a patient's age and gestational age-related risk of trisomy 21, 18 and 13 or an a priori risk that is based on other findings. This web-based calculator is an aid for providers and genetic counselors to illustrate the relationship between disease prevalence and a test's PPV. It has enhanced our counseling of patients both before they elect noninvasive prenatal screening and after they receive a positive result. PMID:25957020

  10. Planar pixel sensors for the ATLAS upgrade: beam tests results

    NASA Astrophysics Data System (ADS)

    Weingarten, J.; Altenheiner, S.; Beimforde, M.; Benoit, M.; Bomben, M.; Calderini, G.; Gallrapp, C.; George, M.; Gibson, S.; Grinstein, S.; Janoska, Z.; Jentzsch, J.; Jinnouchi, O.; Kishida, T.; La Rosa, A.; Libov, V.; Macchiolo, A.; Marchiori, G.; Muenstermann, D.; Nagai, R.; Piacquadio, G.; Ristic, B.; Rubinskiy, I.; Rummler, A.; Takubo, Y.; Troska, G.; Tsiskaridtze, S.; Tsurin, I.; Unno, Y.; Weigell, P.; Wittig, T.

    2012-10-01

    The performance of planar silicon pixel sensors, in development for the ATLAS Insertable B-Layer and High Luminosity LHC (HL-LHC) upgrades, has been examined in a series of beam tests at the CERN SPS facilities since 2009. Salient results are reported on the key parameters, including the spatial resolution, the charge collection and the charge sharing between adjacent cells, for different bulk materials and sensor geometries. Measurements are presented for n+-in-n pixel sensors irradiated with a range of fluences and for p-type silicon sensors with various layouts from different vendors. All tested sensors were connected via bump-bonding to the ATLAS Pixel read-out chip. The tests reveal that both n-type and p-type planar sensors are able to collect significant charge even after the lifetime fluence expected at the HL-LHC.

  11. TEST RESULTS FROM GAMMA IRRADIATION OF ALUMINUM OXYHYDROXIDES

    SciTech Connect

    Fisher, D.; Westbrook, M.; Sindelar, R.

    2012-02-01

    Hydrated metal oxides or oxyhydroxides boehmite and gibbsite that can form on spent aluminum-clad nuclear fuel assemblies during in-core and post-discharge wet storage were exposed as granular powders to gamma irradiation in a {sup 60}Co irradiator in closed laboratory test vessels with air and with argon as separate cover gases. The results show that boehmite readily evolves hydrogen with exposure up to a dose of 1.8 x 10{sup 8} rad, the maximum tested, in both a full-dried and moist condition of the powder, whereas only a very small measurable quantity of hydrogen was generated from the granular powder of gibbsite. Specific information on the test setup, sample characteristics, sample preparation, irradiation, and gas analysis are described.

  12. High-Speed, High-Temperature Finger Seal Test Results

    NASA Technical Reports Server (NTRS)

    Proctor, Margaret P.; Kumar, Arun; Delgado, Irebert R.

    2002-01-01

    Finger seals have significantly lower leakage rates than conventional labyrinth seals used in gas turbine engines and are expected to decrease specific fuel consumption by over 1 percent and to decrease direct operating cost by over 0.5 percent. Their compliant design accommodates shaft growth and motion due to thermal and dynamic loads with minimal wear. The cost to fabricate these finger seals is estimated to be about half the cost to fabricate brush seals. A finger seal has been tested in NASA's High Temperature, High Speed Turbine Seal Test Rig at operating conditions up to 1200 F, 1200 ft/s, and 75 psid. Static, performance and endurance test results are presented. While seal leakage and wear performance are acceptable, further design improvements are needed to reduce the seal power loss.

  13. Mu2e transport solenoid prototype tests results

    DOE PAGES

    Lopes, Mauricio L.; G. Ambrosio; DiMarco, J.; Evbota, D.; Feher, S.; Friedsam, H.; Galt, A.; Hays, S.; Hocker, J.; Kim, M. J.; et al

    2016-02-08

    The Fermilab Mu2e experiment has been developed to search for evidence of charged lepton flavor violation through the direct conversion of muons into electrons. The transport solenoid is an s-shaped magnet which guides the muons from the source to the stopping target. It consists of fifty-two superconducting coils arranged in twenty-seven coil modules. A full-size prototype coil module, with all the features of a typical module of the full assembly, was successfully manufactured by a collaboration between INFN-Genoa and Fermilab. The prototype contains two coils that can be powered independently. In order to validate the design, the magnet went throughmore » an extensive test campaign. Warm tests included magnetic measurements with a vibrating stretched wire, electrical and dimensional checks. As a result, the cold performance was evaluated by a series of power tests as well as temperature dependence and minimum quench energy studies.« less

  14. Cycom 977-2 Composite Material: Impact Test Results

    NASA Technical Reports Server (NTRS)

    Engel, Carl D.; Herald, Stephen; Watkins, Casey

    2005-01-01

    The reaction frequency data from 13A testing by MSFC and WSTF appear well behaved for the sample number used by each and exhibit the same type of energy level dependency. The reaction frequency shift in energy level is unexplained at this time. All the 13A data suggest that only a small amount of material is consumed when reactions take place. At ambient pressure, most of not all reactions are quenched as indicated by the small mass loss. As test pressure is increased in LOX using 13B results. Cycom does not support initiation of reactions or propagations of reactions in GOX at 100 psis based on tests at MSFC and WSTF at 72 ft-lb impact energy. No batch effect was identified in LOX or GOX.

  15. DUS II SOIL GAS SAMPLING AND AIR INJECTION TEST RESULTS

    SciTech Connect

    Noonkester, J.; Jackson, D.; Jones, W.; Hyde, W.; Kohn, J.; Walker, R.

    2012-09-20

    Soil vapor extraction (SVE) and air injection well testing was performed at the Dynamic Underground Stripping (DUS) site located near the M-Area Settling Basin (referred to as DUS II in this report). The objective of this testing was to determine the effectiveness of continued operation of these systems. Steam injection ended on September 19, 2009 and since this time the extraction operations have utilized residual heat that is present in the subsurface. The well testing campaign began on June 5, 2012 and was completed on June 25, 2012. Thirty-two (32) SVE wells were purged for 24 hours or longer using the active soil vapor extraction (ASVE) system at the DUS II site. During each test five or more soil gas samples were collected from each well and analyzed for target volatile organic compounds (VOCs). The DUS II site is divided into four parcels (see Figure 1) and soil gas sample results show the majority of residual VOC contamination remains in Parcel 1 with lesser amounts in the other three parcels. Several VOCs, including tetrachloroethylene (PCE) and trichloroethylene (TCE), were detected. PCE was the major VOC with lesser amounts of TCE. Most soil gas concentrations of PCE ranged from 0 to 60 ppmv with one well (VEW-22A) as high as 200 ppmv. Air sparging (AS) generally involves the injection of air into the aquifer through either vertical or horizontal wells. AS is coupled with SVE systems when contaminant recovery is necessary. While traditional air sparging (AS) is not a primary component of the DUS process, following the cessation of steam injection, eight (8) of the sixty-three (63) steam injection wells were used to inject air. These wells were previously used for hydrous pyrolysis oxidation (HPO) as part of the DUS process. Air sparging is different from the HPO operations in that the air was injected at a higher rate (20 to 50 scfm) versus HPO (1 to 2 scfm). . At the DUS II site the air injection wells were tested to determine if air sparging affected

  16. Small-Scale Spray Releases: Orifice Plugging Test Results

    SciTech Connect

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Blanchard, Jeremy; Kimura, Marcia L.; Kurath, Dean E.

    2012-09-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities, is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations published in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials present in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty introduced by extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches in which the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are largely absent. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine the aerosol release fractions and aerosol generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents (AFA) was assessed with most of the simulants. Orifices

  17. Accelerated aging test results for aerospace wire insulation constructions

    NASA Technical Reports Server (NTRS)

    Dunbar, William G.

    1995-01-01

    Several wire insulation constructions were evaluated with and without continuous glow discharges at low pressure and high temperature to determine the aging characteristics of acceptable wire insulation constructions. It was known at the beginning of the test program that insulation aging takes several years when operated at normal ambient temperature and pressure of 20 C and 760 torr. Likewise, it was known that the accelerated aging process decreases insulation life by approximately 50% for each 10 C temperature rise. Therefore, the first phases of the program, not reported in these test results, were to select wire insulation constructions that could operate at high temperature and low pressure for over 10,000 hours with negligible shrinkage and little materials' deterioration.The final phase of the program was to determine accelerated aging characteristics. When an insulation construction is subjected to partial discharges the insulation is locally heated by the bombardment of the discharges, the insulation is also subjected to ozone and other deteriorating gas particles that may significantly increase the aging process. Several insulation systems using either a single material or combinations of teflon, kapton, and glass insulation constructions were tested. All constructions were rated to be partial discharge and/or corona-free at 240 volts, 400 Hz and 260 C (500 F) for 50, 000 hours at altitudes equivalent to the Paschen law. Minimum partial discharge aging tests were preceded by screening tests lasting 20 hours at 260 C. The aging process was accelerated by subjecting the test articles to temperatures up to 370 C (700 F) with and without partial discharges. After one month operation with continuous glow discharges surrounding the test articles, most insulation systems were either destroyed or became brittle, cracked, and unsafe for use. Time with space radiation as with partial discharges is accumulative.

  18. Results of a sub-scale model rotor icing test

    NASA Technical Reports Server (NTRS)

    Flemming, Robert J.; Bond, Thomas H.; Britton, Randall K.

    1991-01-01

    A heavily instrumented sub-scale model of a helicopter main rotor was tested in the NASA Lewis Research Center Icing Research Tunnel (IRT) in September and November 1989. The four-bladed main rotor had a diameter of 1.83 m (6.00 ft) and the 0.124 m (4.9 in) chord rotor blades were specially fabricated for this experiment. The instrumented rotor was mounted on a Sikorsky Aircraft Powered Force Model, which enclosed a rotor balance and other measurement systems. The model rotor was exposed to a range of icing conditions that included variations in temperature, liquid water content, and median droplet diameter, and was operated over ranges of advance ratio, shaft angle, tip Mach number (rotor speed) and weight coefficient to determine the effect of these parameters on ice accretion. In addition to strain gage and balance data, the test was documented with still, video, and high speed photography, ice profile tracings, and ice molds. The sensitivity of the model rotor to the test parameters, is given, and the result to theoretical predictions are compared. Test data quality was excellent, and ice accretion prediction methods and rotor performance prediction methods (using published icing lift and drag relationships) reproduced the performance trends observed in the test. Adjustments to the correlation coefficients to improve the level of correlation are suggested.

  19. Spent fuel drying system test results (second dry-run)

    SciTech Connect

    Klinger, G.S.; Oliver, B.M.; Abrefah, J.; Marschman, S.C.; MacFarlan, P.J.; Ritter, G.A.

    1998-07-01

    The water-filled K-Basins in the Hanford 100 Area have been used to store N-Reactor spent nuclear fuel (SNF) since the 1970s. Because some leaks have been detected in the basins and some of the fuel is breached due to handling damage and corrosion, efforts are underway to remove the fuel elements from wet storage. An Integrated Process Strategy (IPS) has been developed to package, dry, transport, and store these metallic uranium fuel elements in an interim storage facility on the Hanford Site (WHC 1995). Information required to support the development of the drying processes, and the required safety analyses, is being obtained from characterization tests conducted on fuel elements removed from the K-Basins. A series of whole element drying tests (reported in separate documents, see Section 7.0) have been conducted by Pacific Northwest National Laboratory (PNNL) on several intact and damaged fuel elements recovered from both the K-East and K-West Basins. This report documents the results of the second dry-run test, which was conducted without a fuel element. With the concurrence of project management, the test protocol for this run, and subsequent drying test runs, was modified. These modifications were made to allow for improved data correlation with drying procedures proposed under the IPS. Details of these modifications are discussed in Section 3.0.

  20. Results of patch testing with lavender oil in Japan.

    PubMed

    Sugiura, M; Hayakawa, R; Kato, Y; Sugiura, K; Hashimoto, R

    2000-09-01

    We report the annual results of patch testing with lavender oil for a 9-year period from 1990 to 1998 in Japan. Using Finn Chambers and Scanpor tape, we performed 2-day closed patch testing with lavender oil 20% pet. on the upper back of each patient suspected of having cosmetic contact dermatitis. We compared the frequency of positive patch tests to lavender oil each year with those to other fragrances. We diagnosed contact allergy when patch test reactions were + or <+ at 1 day after removal. The positivity rate of lavender oil was 3.7% (0-13.9%) during the 9-year period from 1990 to 1998. The positivity rate of lavender oil increased suddenly in 1997. Recently, in Japan, there has been a trend for aromatherapy using lavender oil. With this trend, placing dried lavender flowers in pillows, drawers, cabinets, or rooms has become a new fashion. We asked patients who showed a positive reaction to lavender oil about their use of dried lavender flowers. We confirmed the use of dried lavender flowers in 5 cases out of 11 positive cases in 1997 and 8 out of 15 positive cases in 1998. We concluded that the increase in patch test positivity rates to lavender oil in 1997 and 1998 was due to the above fashion, rather than due to fragrances in cosmetic products.

  1. VLT deformable secondary mirror: integration and electromechanical tests results

    NASA Astrophysics Data System (ADS)

    Biasi, R.; Andrighettoni, M.; Angerer, G.; Mair, C.; Pescoller, D.; Lazzarini, P.; Anaclerio, E.; Mantegazza, M.; Gallieni, D.; Vernet, E.; Arsenault, R.; Madec, P.-Y.; Duhoux, P.; Riccardi, A.; Xompero, M.; Briguglio, R.; Manetti, M.; Morandini, M.

    2012-07-01

    The VLT Deformable secondary is planned to be installed on the VLT UT#4 as part of the telescope conversion into the Adaptive Optics test Facility (AOF). The adaptive unit is based on the well proven contactless, voice coil motor technology that has been already successfully implemented in the MMT, LBT and Magellan adaptive secondaries, and is considered a promising technical choice for the forthcoming ELT-generation adaptive correctors, like the E-ELT M4 and the GMT ASM. The VLT adaptive unit has been recently assembled after the completion of the manufacturing and modular test phases. In this paper, we present the most relevant aspects of the system integration and report the preliminary results of the electromechanical tests performed on the unit. This test campaign is a typical major step foreseen in all similar systems built so far: thanks to the metrology embedded in the system, that allows generating time-dependent stimuli and recording in real time the position of the controlled mirror on all actuators, typical dynamic response quality parameters like modal settling time, overshoot and following error can be acquired without employing optical measurements. In this way the system dynamic and some aspect of its thermal and long term stability can be fully characterized before starting the optical tests and calibrations.

  2. Experimental Results of Integrated Refrigeration and Storage System Testing

    NASA Technical Reports Server (NTRS)

    Notardonato, W. U.; Johnson, W. L.; Jumper, K.

    2009-01-01

    Launch operations engineers at the Kennedy Space Center have identified an Integrated Refrigeration and Storage system as a promising technology to reduce launch costs and enable advanced cryogenic operations. This system uses a close cycle Brayton refrigerator to remove energy from the stored cryogenic propellant. This allows for the potential of a zero loss storage and transfer system, as well and control of the state of the propellant through densification or re-liquefaction. However, the behavior of the fluid in this type of system is different than typical cryogenic behavior, and there will be a learning curve associated with its use. A 400 liter research cryostat has been designed, fabricated and delivered to KSC to test the thermo fluid behavior of liquid oxygen as energy is removed from the cryogen by a simulated DC cycle cryocooler. Results of the initial testing phase focusing on heat exchanger characterization and zero loss storage operations using liquid oxygen are presented in this paper. Future plans for testing of oxygen densification tests and oxygen liquefaction tests will also be discussed. KEYWORDS: Liquid Oxygen, Refrigeration, Storage

  3. Results of thermal vacuum tests for the PASP+ flight modules

    NASA Technical Reports Server (NTRS)

    Curtis, Henry; Piszczor, Michael; Guidice, Don; Severance, Paul

    1993-01-01

    The PASP PLUS (Photovoltaic Array Space Power Plus Diagnostics) program is a photovoltaic experiment which will be flown on the Air Force satellite APEX (Advanced Photovoltaic And Electronic Experiment). APEX will be launched with a Pegasus during the summer of 1993. There are two other small experiments on APEX but PASP+ is the largest, uses the most power, and accounts for over 90 percent of the data requirements. The orbit is elliptical with apogee and perigee of 1050 and 190 nautical miles respectively. The inclination is 70 deg. The two main objectives of PASP+ are to determine the interactions between high voltage arrays and the space plasma environment and to determine the radiation damage characteristics of several newer types of solar cells. In order to determine the interactions with the space plasma, several of the individual cell strings will be biased to voltages up to plus or minus 500 V, and leakage currents and arcing rates will be measured. The radiation degradation characteristics will be determined by the continuous monitoring of I-V data for all of the cell strings. As part of an overall testing program, the PASP+ panels and controller were put through a thermal vacuum test in order to check the thermal analysis, obtain temperature coefficients for the individual modules, and have an end-to-end test of the entire PASP+ experiment. This thermal vacuum test is described briefly and the results obtained during that testing are discussed.

  4. Large-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

    2013-08-01

    One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used

  5. Fan Noise Source Diagnostic Test: Tone Modal Structure Results

    NASA Technical Reports Server (NTRS)

    Heidelberg, Laurence J.

    2002-01-01

    This investigation is part of a test series that was extremely comprehensive and included aerodynamic and acoustic testing of a fan stage using two different fan rotors and three different stator designs. The test series is known as the Source Diagnostic Test (SDT) and was conducted by NASA Glenn as part of the Advanced Subsonic Technology (AST) Noise Reduction Program. Tone mode measurements of one of the rotors with three different stators were made. The stator designs involve changes in vane count and sweep at constant solidity. The results of both inlet and exhaust tone mode measurements are presented in terms of mode power for both circumferential and radial mode orders. The results show benefits of vane sweep to be large, up to 13 dB in total tone power. At many conditions, the increase in power due to cutting on the rotor/stator interaction is more than offset by vane sweep. The rotor locked mode is shown as an important contributor to tone power when the blade tip speed is near and above Mach one. This is most evident in the inlet when the direct rotor field starts to cut on.

  6. Honeywell Cascade Distiller System Performance Testing Interim Results

    NASA Technical Reports Server (NTRS)

    Callahan, Michael R.; Sargusingh, Miriam

    2014-01-01

    The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, distillation systems have been actively pursued as one of the technologies for water recovery. The Cascade Distillation System (CDS) is a vacuum rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. The CDS was previously under development through Honeywell and NASA. In 2009, an assessment was performed to collect data to support down-selection and development of a primary distillation technology for application in a lunar outpost water recovery system. Based on the results of this testing, an expert panel concluded that the CDS showed adequate development maturity, TRL-4, together with the best product water quality and competitive weight and power estimates to warrant further development. The Advanced Exploration Systems (AES) Water Recovery Project (WRP) worked to address weaknesses identified by The Panel; namely bearing design and heat pump power efficiency. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades. The CDS will also have been challenged with ISS analog waste streams and a subset of those being considered for Exploration architectures. This paper details interim results of the AES WRP CDS performance testing.

  7. Flight test results of riblets at supersonic speeds

    NASA Technical Reports Server (NTRS)

    Zuniga, Fanny A.; Anderson, Bianca T.; Bertelrud, Arild

    1992-01-01

    A flight experiment to test and evaluate the skin friction drag characteristics of a riblet surface in turbulent flow at supersonic speeds was conducted at NASA Dryden. Riblets of groove sizes 0.0030 and 0.0013 in. were mounted on the F-104G flight test fixture. The test surfaces were surveyed with boundary layer rakes and pressure orifices to examine the boundary layer profiles and pressure distributions of the flow. Skin friction reductions caused by the riblet surface were reported based on measured differences of momentum thickness between the smooth and riblet surfaces obtained from the boundary layer data. Flight test results for the 0.0030 in. riblet show skin friction reductions of 4 to 8 % for Mach numbers ranging from 1.2 to 1.6 and Reynolds numbers ranging from 2 to 3.4 million per unit foot. The results from the 0.0013 in. riblets show skin friction reductions of 4 to 15 % for Mach 1.2 to 1.4 and Reynolds numbers ranging from 3.6 to 6 million per unit foot.

  8. Preliminary test results with a Stirling Laboratory Research Engine

    NASA Technical Reports Server (NTRS)

    Hoehn, F. W.; Nguyen, B. D.; Schmit, D. D.

    1979-01-01

    The Jet Propulsion Laboratory has designed, assembled, and initiated testing of a Stirling Laboratory Research Engine (SLRE). This preprototype engine provides a research tool to support the development of a broad range of analytical modeling and experimental efforts. The SLRE is a horizontally opposed, two-piston, single-acting Stirling engine with a split crankshaft drive mechanism. The paper discusses the preliminary results obtained during engine motoring tests and compares these results with two different analytical prediction models. Comparisons are made between experiment, the classical Schmidt analysis, and the JPL Stirling Cycle Analysis Model (SCAM). SCAM is a computerized one-dimensional, cyclic, compressible flow model of the SLRE and consists of a compilation of individual component subroutines. The formulation and current state of development of the SCAM program is briefly described.

  9. The XRS Low Temperature Cryogenic System: Ground Performance Test Results

    NASA Technical Reports Server (NTRS)

    Breon, Susan; Sirron, Peter; Boyle, Robert; Canavan, Ed; DiPirro, Michael; Serlemitsos, Aristides; Tuttle, James; Whitehouse, Paul

    1998-01-01

    The X-Ray Spectrometer (XRS) instrument is part of the Astro-E mission scheduled to launch early in 2000. Its cryogenic system is required to cool a 32-element square array of x-ray microcalorimeters to 60-65 mK over a mission lifetime of at least 2 years. This is accomplished using an adiabatic demagnetization refrigerator (ADR) contained within a two-stage superfluid helium/solid neon cooler. Goddard Space Flight Center is providing the ADR and helium dewar. The flight system was assembled in Sept. 1997 and subjected to extensive thermal performance tests. This paper presents test results at both the system and component levels. In addition, results of the low temperature topoff performed in Japan with the engineering unit neon and helium dewars are discussed.

  10. Flight test results of ladar brownout look-through capability

    NASA Astrophysics Data System (ADS)

    Stelmash, Stephen; Münsterer, Thomas; Kramper, Patrick; Samuelis, Christian; Bühler, Daniel; Wegner, Matthias; Sheth, Sagar

    2015-06-01

    The paper discusses recent results of flight tests performed with the Airbus Defence and Space ladar system at Yuma Proving Grounds. The ladar under test was the SferiSense® system which is in operational use as an in-flight obstacle warning and avoidance system on the NH90 transport helicopter. Just minor modifications were done on the sensor firmware to optimize its performance in brownout. Also a new filtering algorithm fitted to segment dust artefacts out of the collected 3D data in real-time was employed. The results proved that this ladar sensor is capable to detect obstacles through brownout dust clouds with a depth extending up to 300 meters from the landing helicopter.

  11. NASA Wiring for Space Applications Program test results

    SciTech Connect

    Vaughn, J.A.

    1995-11-01

    The objectives of the NASA Wiring for Space Applications program were to investigate the effects of atomic oxygen (AO), ultraviolet (UV) radiation, and AO with UV synergistic effects on wire insulation materials. The AO exposure was on the order of 10(exp 21) atoms/sq cm and the vacuum UV radiation was on the order of 10,000 ESH. The results of these tests are presented in this document.

  12. Summary of Test Results for Daya Bay Rock Samples

    SciTech Connect

    Onishi, Celia Tiemi; Dobson, Patrick; Nakagawa, Seiji

    2004-10-12

    A series of analytical tests was conducted on a suite of granitic rock samples from the Daya Bay region of southeast China. The objective of these analyses was to determine key rock properties that would affect the suitability of this location for the siting of a neutrino oscillation experiment. This report contains the results of chemical analyses, rock property measurements, and a calculation of the mean atomic weight.

  13. First tritium results of the KATRIN test experiment TRAP

    SciTech Connect

    Eichelhardt, F.; Bornschein, B.; Bornschein, L.; Kazachenko, O.; Kernert, N.; Sturm, M.

    2008-07-15

    The TRAP experiment (Tritium Argon frost Pump) has been built at the Tritium Laboratory Karlsruhe (TLK) as a test rig for the Cryogenic Pumping Section (CPS) of the Karlsruhe Tritium Neutrino Experiment (KATRIN). TRAP employs a heterogeneous layer of pre-condensed argon to adsorb hydrogen isotopes at {approx} 4.2 K This paper presents results obtained in the first three tritium experiments with TRAP. (authors)

  14. Cryogenic modelling of the ISOCAM experiment from test results

    NASA Astrophysics Data System (ADS)

    de Sa, L.; Collaudin, B.

    An overview is presented of cryogenic test results and fundamental measurements on the ISOCAM, an infrared camera to be mounted aboard the ISO (Infrared Space Observatory) satellite. Thermal conductances and heat distribution in the rotor and stator of a cryogenic stepper motor are evaluated by model fitting. Phenomena such as 'chopped' function of motors and two-time temperature rise after continuous motor functioning are studied.

  15. Results of toxicological testing of Jefferson Parish pilot plant samples.

    PubMed Central

    Miller, R G; Kopfler, F C; Condie, L W; Pereira, M A; Meier, J R; Ringhand, H P; Robinson, M; Casto, B C

    1986-01-01

    Five toxicological tests were performed using concentrated drinking water samples collected at a pilot-scale drinking water treatment plant that had streams treated with different disinfectants (no disinfectant, ozone, chlorine dioxide, monochloramine, or chlorine) before treatment with granular activated carbon (GAC). The toxicological tests used in this study were the Ames Salmonella assay, a subchronic in vivo toxicity assay in mice, the SENCAR mouse skin initiation-promotion assay, a rat liver foci assay, and the lung adenoma assay in strain A mice. These tests were conducted to determine the general toxicity and the mutagenic/carcinogenic potential associated with the use of disinfection and/or GAC in the treatment of drinking water. The stability of the mutagenic activity of the samples tested was determined by repeated analysis using the Ames Salmonella assay. Results indicated that the samples remained mutagenic for the duration of the tests. All the drinking water concentrates (4000 X) prepared by the XAD resin adsorption procedure failed to provide statistically significant indication of carcinogenic activity in the SENCAR mouse, rat liver foci, and the lung adenoma assays. However, concentrates of the chlorine, chlorine dioxide, and monochloramine treated waters gave consistent mutagenic responses in the Ames Salmonella assay. GAC was effective for 6 months in removing both the mutagenicity of chlorine-treated water and the potential of water to become mutagenic when treated with chlorine. In the in vivo, subchronic 30-day toxicity test in mice, some statistically significant differences in organ weights and body weights of animals exposed to different concentrates of some of the samples were observed. However, a consistent pattern of these differences indicating overt toxicity was not detected. PMID:3816718

  16. Seismic II over I Drop Test Program results and interpretation

    SciTech Connect

    Thomas, B.

    1993-03-01

    The consequences of non-seismically qualified (Category 2) objects falling and striking essential seismically qualified (Category 1) objects has always been a significant, yet analytically difficult problem, particularly in evaluating the potential damage to equipment that may result from earthquakes. Analytical solutions for impact problems are conservative and available for mostly simple configurations. In a nuclear facility, the [open quotes]sources[close quotes] and [open quotes]targets[close quotes] requiring evaluation are frequently irregular in shape and configuration, making calculations and computer modeling difficult. Few industry or regulatory rules are available on this topic even though it is a source of considerable construction upgrade costs. A drop test program was recently conducted to develop a more accurate understanding of the consequences of seismic interactions. The resulting data can be used as a means to improve the judgment of seismic qualification engineers performing interaction evaluations and to develop realistic design criteria for seismic interactions. Impact tests on various combinations of sources and targets commonly found in one Savannah River Site (SRS) nuclear facility were performed by dropping the sources from various heights onto the targets. This report summarizes results of the Drop Test Program. Force and acceleration time history data are presented as well as general observations on the overall ruggedness of various targets when subjected to impacts from different types of sources.

  17. Seismic II over I Drop Test Program results and interpretation

    SciTech Connect

    Thomas, B.

    1993-03-01

    The consequences of non-seismically qualified (Category 2) objects falling and striking essential seismically qualified (Category 1) objects has always been a significant, yet analytically difficult problem, particularly in evaluating the potential damage to equipment that may result from earthquakes. Analytical solutions for impact problems are conservative and available for mostly simple configurations. In a nuclear facility, the {open_quotes}sources{close_quotes} and {open_quotes}targets{close_quotes} requiring evaluation are frequently irregular in shape and configuration, making calculations and computer modeling difficult. Few industry or regulatory rules are available on this topic even though it is a source of considerable construction upgrade costs. A drop test program was recently conducted to develop a more accurate understanding of the consequences of seismic interactions. The resulting data can be used as a means to improve the judgment of seismic qualification engineers performing interaction evaluations and to develop realistic design criteria for seismic interactions. Impact tests on various combinations of sources and targets commonly found in one Savannah River Site (SRS) nuclear facility were performed by dropping the sources from various heights onto the targets. This report summarizes results of the Drop Test Program. Force and acceleration time history data are presented as well as general observations on the overall ruggedness of various targets when subjected to impacts from different types of sources.

  18. Comparison of road load simulator test results with track tests on electric vehicle propulsion system

    NASA Technical Reports Server (NTRS)

    Dustin, M. O.

    1983-01-01

    A special-purpose dynamometer, the road load simulator (RLS), is being used at NASA's Lewis Research Center to test and evaluate electric vehicle propulsion systems developed under DOE's Electric and Hybrid Vehicle Program. To improve correlation between system tests on the RLS and track tests, similar tests were conducted on the same propulsion system on the RLS and on a test track. These tests are compared in this report. Battery current to maintain a constant vehicle speed with a fixed throttle was used for the comparison. Scatter in the data was greater in the track test results. This is attributable to variations in tire rolling resistance and wind effects in the track data. It also appeared that the RLS road load, determined by coastdown tests on the track, was lower than that of the vehicle on the track. These differences may be due to differences in tire temperature.

  19. Small-Scale Spray Releases: Additional Aerosol Test Results

    SciTech Connect

    Schonewill, Philip P.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, G. N.; Mahoney, Lenna A.; Tran, Diana N.; Burns, Carolyn A.; Kurath, Dean E.

    2013-08-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are largely absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale. The small-scale testing and resultant data are described in Mahoney et al. (2012b) and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the

  20. Qualification test results for blue-red reflecting solar covers

    NASA Technical Reports Server (NTRS)

    Beauchamp, W. T.

    1994-01-01

    Recent market forces and design innovations have spurred the development of solar cell covers that significantly reduce the solar absorptance for a cell array. GaAs cells, using Ge as the substrate host material, can have a significantly higher output if the solar absorptance of the cell array is reduced. New optical coating design techniques have allowed the construction of covers that reflect the ultraviolet energy (below 350 nm) and the near infrared energy (above 900 nm) resulting in the beneficial reduction in absorptance. Recent modeling suggests three or more present output increase due to the lowered temperature with such a device. Within the last several months we have completed the testing of production samples of these new covers in a qualification series that included the usual environmental effects associated with the routine testing of solar cell covers and the combined effects of protons, electrons and solar UV as would be encountered in space. For the combined effects testing the samples were exposed to 300 sun days equivalent UV, 5 x 10(exp 14)/sq cm of 0.5 MeV protons and 10(exp 15)/sq cm of 1.0 MeV electrons. Measurements of the reflectance, transmission, emittance and other appropriate parameters were made before and after the testing. As measured by the averaged transmission over the cell operating band, the change in transmission for the samples was less than or about equal to 1 percent. The details of the testing and the results in terms of transmission, reflectance and emittance are discussed in the paper.

  1. Fan Noise Source Diagnostic Test: Rotor Alone Aerodynamic Performance Results

    NASA Technical Reports Server (NTRS)

    Hughes, Christopher E.; Jeracki, Robert J.; Woodward, Richard P.; Miller, Christopher J.

    2005-01-01

    The aerodynamic performance of an isolated fan or rotor alone model was measured in the NASA Glenn Research Center 9- by 15- Foot Low Speed Wind Tunnel as part of the Fan Broadband Source Diagnostic Test conducted at NASA Glenn. The Source Diagnostic Test was conducted to identify the noise sources within a wind tunnel scale model of a turbofan engine and quantify their contribution to the overall system noise level. The fan was part of a 1/5th scale model representation of the bypass stage of a current technology turbofan engine. For the rotor alone testing, the fan and nacelle, including the inlet, external cowl, and fixed area fan exit nozzle, were modeled in the test hardware; the internal outlet guide vanes located behind the fan were removed. Without the outlet guide vanes, the velocity at the nozzle exit changes significantly, thereby affecting the fan performance. As part of the investigation, variations in the fan nozzle area were tested in order to match as closely as possible the rotor alone performance with the fan performance obtained with the outlet guide vanes installed. The fan operating performance was determined using fixed pressure/temperature combination rakes and the corrected weight flow. The performance results indicate that a suitable nozzle exit was achieved to be able to closely match the rotor alone and fan/outlet guide vane configuration performance on the sea level operating line. A small shift in the slope of the sea level operating line was measured, which resulted in a slightly higher rotor alone fan pressure ratio at take-off conditions, matched fan performance at cutback conditions, and a slightly lower rotor alone fan pressure ratio at approach conditions. However, the small differences in fan performance at all fan conditions were considered too small to affect the fan acoustic performance.

  2. SCD1 thermal design and test result analysis

    NASA Technical Reports Server (NTRS)

    Cardoso, Humberto Pontes; Muraoka, Issamu; Mantelli, Marcia Barbosa Henriques; Leite, Rosangela M. G.

    1990-01-01

    The SCD 01 (Satelite de Coleta de Dados 01) is a spin stabilized low Earth orbit satellite dedicated to the collection and distribution of environmental data. It was completely developed at the Brazilian Institute for Space Research (INPE) and is scheduled to be launched in 1992. The SCD 01 passive thermal control design configuration is presented and the thermal analysis results are compared with the temperatures obtained from a Thermal Balance Test. The correlation between the analytical and experimental results is considered very good. Numerical flight simulations show that the thermal control design can keep all the subsystem temperatures within their specified temperature range.

  3. Test results of autonomous behaviors for urban environment exploration

    NASA Astrophysics Data System (ADS)

    Ahuja, G.; Fellars, D.; Kogut, G.; Pacis Rius, E.; Sights, B.; Everett, H. R.

    2009-05-01

    Under various collaborative efforts with other government labs, private industry, and academia, SPAWAR Systems Center Pacific (SSC Pacific) is developing and testing advanced autonomous behaviors for navigation, mapping, and exploration in various indoor and outdoor settings. As part of the Urban Environment Exploration project, SSC Pacific is maturing those technologies and sensor payload configurations that enable man-portable robots to effectively operate within the challenging conditions of urban environments. For example, additional means to augment GPS is needed when operating in and around urban structures. A MOUT site at Camp Pendleton was selected as the test bed because of its variety in building characteristics, paved/unpaved roads, and rough terrain. Metrics are collected based on the overall system's ability to explore different coverage areas, as well as the performance of the individual component behaviors such as localization and mapping. The behaviors have been developed to be portable and independent of one another, and have been integrated under a generic behavior architecture called the Autonomous Capability Suite. This paper describes the tested behaviors, sensors, and behavior architecture, the variables of the test environment, and the performance results collected so far.

  4. Results of toxicological testing of Jefferson Paris pilot plant samples

    SciTech Connect

    Miller, R.G.; Kopfler, F.C.; Condie, L.W.; Pereira, M.A.; Meier, J.R.; Ringhand, H.P.; Robinson, M.; Casto, B.C.

    1986-11-01

    Five toxicological tests were performed using concentrated drinking water samples collected at a pilot-scale drinking water treatment plant that had streams treated with different disinfectants (no disinfectant, ozone, chlorine dioxide, monochloramine, or chlorine) before treatment with granular activated carbon (GAC). The toxicological tests used in this study were the Ames Salmonella assay, a subchronic in vivo toxicity assay in mice, the SENCAR mouse skin initiation-promotion assay, a rat liver foci assay, and the lung adenoma assay in strain A mice. These tests were conducted to determine the general toxicity and the mutagenic/carcinogenic potential association with the use of disinfection and/or GAC in the treatment of drinking water. Results indicated that the samples remained mutagenic for the duration of the tests. All the drinking water concentrates (4000 x) prepared by the XAD resin adsorption procedure failed to provide statistically significant indication of carcinogenic activity in the SENCAR mouse, rat liver foci, and the lung adenoma assays. However, concentrates of the chlorine, chlorine dioxide, and monochloramine treated waters gave consistent mutagenic responses in the Ames Salmonella assay. GAC was effective for 6 months in removing both the mutagenicity of chlorine-treated water and the potential of water to become mutagenic when treated with chlorine. A consistent pattern of these differences indicating overt toxicity was not detected.

  5. Test results for the Gemini Planet Imager data reduction pipeline

    NASA Astrophysics Data System (ADS)

    Maire, Jérôme; Perrin, Marshall D.; Doyon, René; Chilcote, Jeffrey; Larkin, James E.; Weiss, Jason L.; Marois, Christian; Konopacky, Quinn M.; Millar-Blanchaer, Maxwell; Graham, James R.; Dunn, Jennifer; Galicher, Raphael; Marchis, Franck; Wiktorowicz, Sloane J.; Labrie, Kathleen; Thomas, Sandrine J.; Goodsell, Stephen J.; Rantakyro, Fredrik T.; Palmer, David W.; Macintosh, Bruce A.

    2012-09-01

    The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to detect and characterize planets and debris disks orbiting nearby stars; its science camera is a near infrared integral field spectrograph. We have developed a data pipeline for this instrument, which will be made publicly available to the community. The GPI data reduction pipeline (DRP) incorporates all necessary image reduction and calibration steps for high contrast imaging in both the spectral and polarimetric modes, including datacube generation, wavelength solution, astrometric and photometric calibrations, and speckle suppression via ADI and SSDI algorithms. It is implemented in IDL as a flexible modular system, and includes both command line and graphical interface tools including a customized viewer for GPI datacubes. This GPI data reduction pipeline is currently working very well, and is in use daily processing data during the instrument’s ongoing integration and test period at UC Santa Cruz. Here we summarize the results from recent pipeline tests, and present reductions of instrument test data taken with GPI. We will continue to refine and improve these tools throughout the rest of GPI’s testing and commissioning, and they will be released to the community, including both IDL source code and compiled versions that can be used without an IDL license.

  6. Underground tank vitrification: Engineering-scale test results

    SciTech Connect

    Campbell, B.E.; Timmerman, C.L.; Bonner, W.F.

    1990-06-01

    Contamination associated with underground tanks at US Department of Energy sites and other sites may be effectively remediated by application of in situ vitrification (ISV) technology. In situ vitrification converts contaminated soil and buried wastes such as underground tanks into a glass and crystalline block, similar to obsidian with crystalline phases. A radioactive engineering-scale test performed at Pacific Northwest Laboratory in September 1989 demonstrated the feasibility of using ISV for this application. A 30-cm-diameter (12-in.-diameter) buried steel and concrete tank containing simulated tank sludge was vitrified, producing a solid block. The tank sludge used in the test simulated materials in tanks at Oak Ridge National Laboratory. Hazardous components of the tank sludge were immobilized or removed and captured in the off-gas treatment system. The steel tank was converted to ingots near the bottom of the block and the concrete walls were dissolved into the resulting glass and crystalline block. Although one of the four moving electrodes froze'' in place about halfway into the test, operations were able to continue. The test was successfully completed and all the tank sludge was vitrified. 7 refs., 12 figs., 5 tabs.

  7. Critical composite joint subcomponents: Analysis and test results

    NASA Technical Reports Server (NTRS)

    Bunin, B. L.

    1983-01-01

    This program has been conducted to develop the technology for critical structural joints of a composite wing structure meeting design requirements for a 1990 commercial transport aircraft. A prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Load sharing between bolts in multirow joints was computed by a nonlinear analysis program (A4FJ) which was used both to assess the efficiency of different joint design concepts and to predict the strengths of large test articles representing a section from a wing root chord-wise splice. In most cases, the predictions were accurate to within a few percent of the test results. A highlight of these tests was the consistent ability to achieve gross-section failure strains on the order of 0.005 which represents a considerable improvement over the state of the art. The improvement was attained largely as the result of the better understanding of the load sharing in multirow joints provided by the analysis. The typical load intensity on the structural joints was about 40 to 45 thousand pound per inch in laminates having interspersed 37 1/2-percent 0-degree plies, 50-percent + or - 45-degrees plies and 12 1/2-percent 90-degrees plies. The composite material was Toray 300 fiber and Ciba-Geigy 914 resin, in the form of 0.010-inch thick unidirectional tape.

  8. Results of the analysis of the blood lymphocyte proliferation test data from the National Jewish Center

    SciTech Connect

    From, E.L.; Newman, L.S.; Mroz, M.M.

    1997-03-01

    A new approach to the analysis of the blood beryllium lymphocyte proliferation test (LPT) was presented to the Committee to Accredit Beryllium Sensitization Testing-Beryllium Industry Scientific Advisory Committee in April, 1994. Two new outlier resistant methods were proposed for the analysis of the blood LPT and compared with the approach then in use by most labs. The National Jewish Center (NJC) agreed to provide data from a study that was underway at that time. Three groups of LPT data are considered: (1) a sample of 168 beryllium exposed (BE) workers and 20 nonexposed (NE) persons; (2) 25 unacceptable LPTs, and (3) 32 abnormal LPTs for individuals known to have chronic beryllium disease (CBD). The LAV method described in ORNL-6818 was applied to each LPT. Graphical and numerical summaries similar to those presented for the ORISE data are given. Three methods were used to identify abnormal LPTs. All three methods correctly identified the 32 known CBD cases as abnormal.

  9. Engineering test results for the Moog Single Line Disconnect

    NASA Technical Reports Server (NTRS)

    Glubke, Scott E.

    1990-01-01

    New and innovative types of disconnects will be required to service, resupply, and maintain future spacecraft subsystems. Efficiently maintaining orbiting scientific instruments, spacecraft support systems, and a manned space station over a long period of time will require the periodic replenishment of consumables and the replacement of components. To accomplish these tasks, the fluid disconnect must be designed to allow the connection and separation of fluid lines and components with minimal hazard to crew and equipment. The capability to simply connect a refueling line or to easily replace a failed component greatly extends the life of a space based fluid system. A test program was initiated to evaluate the Moog Single Line Disconnect. The objective of the test program was to demonstrate the operational characteristics of the disconnect and to verify compliance with current safety regulations. The results of the program are summarized in the referenced document.

  10. Vented Tank Resupply Experiment--Flight Test Results

    NASA Technical Reports Server (NTRS)

    Chato, David J.; Martin, Timothy A.

    1997-01-01

    This paper reports the results of the Vented Tank Resupply Experiment (VTRE) which was flown as a payload on STS 77. VTRE looks at the ability of vane Propellant Management Devices (PMD) to separate liquid and gas in low gravity. VTRE used two clear 0.8 cubic foot tanks one spherical and one with a short barrel section and transferred Refrigerant 113 between them as well as venting it to space. Tests included retention of liquid during transfer, liquid free venting, and recovery of liquid into the PMD after thruster firing. Liquid was retained successfully at the highest flow rate tested (2.73 gpm). Liquid free vents were achieved for both tanks, although at a higher flow rate (0.1591 cfm) for the spherical tank than the other (0.0400 cfm). Recovery from a thruster firing which moved the liquid to the opposite end of the tank from the PMD was achieved in 30 seconds.

  11. Results from a test facility for solar cells in Sweden

    NASA Astrophysics Data System (ADS)

    Hedstrom, J.; Kallback, B.; Sigurd, D.

    Climatological and design characteristics of the Swedish solar cell test station are presented, together with theoretical models for determining cell operating parameters. On-line data is collected on insolation, voltages, and panel temperatures, with the capability thus far applied to simultaneous testing of six cell modules. The system is equipped for 1 kW of input. The modules are removed once a year for cleaning and inspection to reveal defective cells and measure performance in a solar simulator. Power losses to date have been 4-5 pct due to dust and 3-4 pct due to snow cover, which occurs in winter when little insolation is available. Optimization of the voltage load has resulted in annual cell outputs within 96 pct of that projected for a peak power tracking mode.

  12. Multislit optimized spectrometer: flight-like environment test results

    NASA Astrophysics Data System (ADS)

    Good, William S.; Valle, Tim; Davis, Curtiss O.; Tufillaro, Nicholas; Spuhler, Peter; Hardesty, Chuck; Staples, Conor

    2014-09-01

    The NASA ESTO funded Multislit Optimized Spectrometer (MOS) Instrument Incubator Program advances a spatial multiplexing spectrometer for coastal ocean remote sensing from laboratory demonstration to flight-like environment testing. The multiple slit design reduces the required telescope aperture leading to mass and volume reductions over conventional spectrometers when applied to the GEO-CAPE oceans mission. This paper discusses the performance and characterization of the MOS instrument from laboratory and thermal vacuum testing. It also presents the current technology readiness level and possible future applications. Results of an ocean color data product simulation study using flight-like performance data from MOS are also covered. The MOS instrument implementation for GEO-CAPE provides system benefits that may lead to measurable cost savings and reductions in risks while meeting its science objectives.

  13. Research study for materials/properties test results database

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The Lubricants Data Base System was designed and developed for operation on the DEC PDP 11/24 computer. The procedures are written in Datatrieve. In transferring the Lubricants System to the VAX 8600 computer, the Datatrieve had to be 80 percent rewritten. At the end of the contract the Lubricants System is operational on both the PDP 11/24 and VAX 8600 computers. The LOX/GOX, Aluminum/Steel, Toxic, VCM, and Flammability Systems are operational only on the PDP 11/24 computer. The Toxic, VCM, and Flammability Systems do not contain any useable data, only test data. However, the LOX/GOX file does contain test data results supplied by MSFC.

  14. Preliminary Results of Testing of Flow Effects on Evaporator Scaling

    SciTech Connect

    Hu, M.Z.

    2002-02-15

    This investigation has focused on the effects of fluid flow on solids deposition from solutions that simulate the feed to the 2H evaporator at the Savannah River Site. Literature studies indicate that the fluid flow (or shear) affects particle-particle and particle-surface interactions and thus the phenomena of particle aggregation in solution and particle deposition (i.e., scale formation) onto solid surfaces. Experimental tests were conducted with two configurations: (1) using a rheometer to provide controlled shear conditions and (2) using controlled flow of reactive solution through samples of stainless steel tubing. All tests were conducted at 80 C and at high silicon and aluminum concentrations, 0.133 M each, in solutions containing 4 M sodium hydroxide and 1 A4 each of sodium nitrate and sodium nitrite. Two findings from these experiments are important for consideration in developing approaches for reducing or eliminating evaporator scaling problems: (1) The rheometer tests suggested that for the conditions studied, maximum solids deposition occurs at a moderate shear rate, approximately 12 s{sup -1}. That value is expected to be on the order of shear rates that will occur in various parts of the evaporator system; for instance, a 6 gal/min single-phase liquid flow through the 2-in. lift or gravity drain lines would result in a shear rate of approximately 16 s{sup -1}. These results imply that engineering approaches aimed at reducing deposits through increased mixing would need to generate shear near all surfaces significantly greater than 12 s{sup -1}. However, further testing is needed to set a target value for shear that is applicable to evaporator operation. This is because the measured trend is not statistically significant at the 95% confidence interval due to variability in the results. In addition, testing at higher temperatures and lower concentrations of aluminum and silicon would more accurately represent conditions in the evaporator. Without

  15. DEEP-South: Network Construction, Test Runs and Early Results

    NASA Astrophysics Data System (ADS)

    Moon, Hong-Kyu; Kim, Myung-Jin; Yim, Hong-Suh; Choi, Young-Jun; Bae, Young-Ho; Roh, Dong-Goo; Park, Jintae; Moon, Bora

    2016-01-01

    Korea Microlensing Telescope Network (KMTNet) which consists of three identical 1.6 m wide-field telescopes with 18k × 18k CCDs, is the first optical survey system of its kind. The combination of fast optics and the mosaic CCD delivers seeing limited images over a 4 square degrees field of view. The main science goal of KMTNet is the discovery and characterization of exoplanets, yet it also offers various other science applications including DEep Ecliptic Patrol of SOUTHern sky (DEEP-South). The aim of DEEP-South is to discover and characterize asteroids and comets, including Near Earth Objects (NEOs). We started test runs last February after commissioning, and will return to normal operations in October 2015. A summary of early results from the test runs will be presented.

  16. Results of buffet tests in a cryogenic wind tunnel

    NASA Technical Reports Server (NTRS)

    Boyden, R. P.; Johnson, W. G., Jr.

    1982-01-01

    Buffet tests on two semispan wing models with different leading edge sweep show that it is feasibile to use the standard dynamic wing root bending moment technique in a cryogenic wind tunnel. One model was a slender 65 deg swept delta wing with sharp leading edges. The other model was an unswept wing of aspect ratio 1.5 with a British NPL 9510 airfoil section. The results for the 65 deg swept delta wing indicate the importance of matching the reduced frequency parameter in model tests for planforms which are sensitive to reduced frequency parameter if quantitative buffet measurements are required. The unique ability of a pressurized cryogenic wind tunnel to separate the effects of Reynolds number and of static aeroelastic distortion by variations in the tunnel stagnation temperature and pressure were demonstrated.

  17. Test results of the solid state stand alone development calorimeter

    SciTech Connect

    Renz, D.P.; Breakall, K.L.; Fultz, R.L.; Wetzel, J.R.

    1993-12-31

    Radiometric heat flow calorimeters have been used to determine the heat output of radioactive materials for over 40 years. EG and G Mound Applied Technologies has developed a stand alone developmental calorimeter which utilizes solid state sensor technology. The sample size was increased to 8 in. high by 4 in. diameter in the system under test from 3 in. high by 5/8 in. diameter in the previous prototype. The calorimeter system uses an air bath for environmental stability which further reduces weight and assay time. Tests in the developmental system have produced excellent servo control results over the 0.5 to 5 watt range, with one sigma precision errors ranging from 1.3% at 0.5 watts to 0.1% at 4 watts. The average run time of these samples was approximately 90 minutes with no preconditioning used.

  18. Various distinctive cytogenetic abnormalities in patients with acute myeloid leukaemia aged 60 years and older express adverse prognostic value: results from a prospective clinical trial.

    PubMed

    van der Holt, Bronno; Breems, Dimitri A; Berna Beverloo, H; van den Berg, Eva; Burnett, Alan K; Sonneveld, Pieter; Löwenberg, Bob

    2007-01-01

    Diagnostic cytogenetic abnormalities are considered important prognostic factors in patients with acute myeloid leukaemia (AML). However, the prognostic assessments have mainly been derived from patients with AML aged <60 years. Two recent studies of AML patients of 60 years and older proposed prognostic classifications with distinct discrepancies. To further study the prognostic value of cytogenetic abnormalities in this patient population, we have evaluated cytogenetic abnormalities in a series of 293 untreated patients with AML aged 60 years and older, included in a randomised phase 3 trial, also in relation to patient characteristics and clinical outcome. The most frequently observed cytogenetic abnormality was trisomy 8 (+8), in 31 (11%) patients. Abnormalities, such as -5, 5q-, abn(17p) and abn(17q), were almost exclusively present in complex karyotypes. A relatively favourable outcome was only observed in five patients with core-binding factor abnormalities t(8;21) and inv(16)/del(16)/t(16;16). However, most of the other evaluated cytogenetic abnormalities, such as 5q-, -7, +8, abn(17p), abn(17q), and complex aberrations expressed a more adverse prognosis when compared with patients with AML aged 60 years and older with a normal karyotype. Large studies to confirm the prognosis of individual cytogenetic aberrations are warranted.

  19. [DELAYED RESULTS OF ENZYME REPLACEMENT THERAPY, PRESCRIBED BY RESULTS OF 13C-TRIGLYCERIDE BREATH TEST].

    PubMed

    Chernyavskiy, V V; Gvozdetska, L S

    2015-01-01

    Maldigestion persists in most patients with chronic pancreatitis (CP). The objective lipase and amylase insufficiency diagnosis is needed to achieve an adequate clinical response to oral pancreatic enzyme substitution therapy. The novel data is presented in the article about the role of 13C-mixed triglyceride breath test as a tool for exocrine pancreatic insufficiency diagnosis, for evaluating fat malabsorbtion in CP patients. 135 patients were included in the investigation. Delayed results of enzyme replacement therapy were estimated after 1 and 2 year of surveillance. It has been shown, that partial recovery of exocrine pancreatic function is possible, and replacement therapy leads to patients nutritional status improving. Thus 13C-triglyceride breath test could be useful tool in clinical practice for CP diagnosis. The test make it possible to choose the initial pancreatic enzyme dosage and are beneficial during the treatment for pancreatic enzyme dose correction. PMID:26827447

  20. [DELAYED RESULTS OF ENZYME REPLACEMENT THERAPY, PRESCRIBED BY RESULTS OF 13C-TRIGLYCERIDE BREATH TEST].

    PubMed

    Chernyavskiy, V V; Gvozdetska, L S

    2015-01-01

    Maldigestion persists in most patients with chronic pancreatitis (CP). The objective lipase and amylase insufficiency diagnosis is needed to achieve an adequate clinical response to oral pancreatic enzyme substitution therapy. The novel data is presented in the article about the role of 13C-mixed triglyceride breath test as a tool for exocrine pancreatic insufficiency diagnosis, for evaluating fat malabsorbtion in CP patients. 135 patients were included in the investigation. Delayed results of enzyme replacement therapy were estimated after 1 and 2 year of surveillance. It has been shown, that partial recovery of exocrine pancreatic function is possible, and replacement therapy leads to patients nutritional status improving. Thus 13C-triglyceride breath test could be useful tool in clinical practice for CP diagnosis. The test make it possible to choose the initial pancreatic enzyme dosage and are beneficial during the treatment for pancreatic enzyme dose correction.

  1. Chronic sensory stroke with and without central pain is associated with bilaterally distributed sensory abnormalities as detected by quantitative sensory testing.

    PubMed

    Krause, Thomas; Asseyer, Susanna; Geisler, Frederik; Fiebach, Jochen B; Oeltjenbruns, Jochen; Kopf, Andreas; Villringer, Kersten; Villringer, Arno; Jungehulsing, Gerhard J

    2016-01-01

    Approximately 20% of patients suffering from stroke with pure or predominant sensory symptoms (referred to as sensory stroke patients) develop central poststroke pain (CPSP). It is largely unknown what distinguishes these patients from those who remain pain free. Using quantitative sensory testing (QST), we analyzed the somatosensory profiles of 50 patients with chronic sensory stroke, of which 25 suffered from CPSP. As compared with reference data from healthy controls, patients with CPSP showed alterations of thermal and mechanical thresholds on the body area contralateral to their stroke (P < 0.01). Patients with sensory stroke but without CPSP (non-pain sensory stroke [NPSS] patients) exhibited similar albeit less pronounced contralesional changes. Paradoxical heat sensation (PHS) and dynamic mechanical allodynia (DMA) showed higher values in CPSP, and an elevated cold detection threshold (CDT) was seen more often in CPSP than in patients with NPSS (P < 0.05). In patients with CPSP, changes in CDT, PHS, dynamic mechanical allodynia, and temporal pain summation (wind-up ratio) each correlated with the presence of pain (P < 0.05). On the homologous ipsilesional body area, both patient groups showed additional significant abnormalities as compared with the reference data, which strongly resembled the contralesional changes. In summary, our analysis reveals that CPSP is associated with impaired temperature perception and positive sensory signs, but differences between patients with CPSP and NPSS are subtle. Both patients with CPSP and NPSS show considerable QST changes on the ipsilesional body side. These results are in part paralleled by recent findings of bilaterally spread cortical atrophy in CPSP and might reflect chronic maladaptive cortical plasticity, particularly in patients with CPSP.

  2. Expose : procedure and results of the joint experiment verification tests

    NASA Astrophysics Data System (ADS)

    Panitz, C.; Rettberg, P.; Horneck, G.; Rabbow, E.; Baglioni, P.

    The International Space Station will carry the EXPOSE facility accommodated at the universal workplace URM-D located outside the Russian Service Module. The launch will be affected in 2005 and it is planned to stay in space for 1.5 years. The tray like structure will accomodate 2 chemical and 6 biological PI-experiments or experiment systems of the ROSE (Response of Organisms to Space Environment) consortium. EXPOSE will support long-term in situ studies of microbes in artificial meteorites, as well as of microbial communities from special ecological niches, such as endolithic and evaporitic ecosystems. The either vented or sealed experiment pockets will be covered by an optical filter system to control intensity and spectral range of solar UV irradiation. Control of sun exposure will be achieved by the use of individual shutters. To test the compatibility of the different biological systems and their adaptation to the opportunities and constraints of space conditions a profound ground support program has been developed. The procedure and first results of this joint Experiment Verification Tests (EVT) will be presented. The results will be essential for the success of the EXPOSE mission and have been done in parallel with the development and construction of the final hardware design of the facility. The results of the mission will contribute to the understanding of the organic chemistry processes in space, the biological adaptation strategies to extreme conditions, e.g. on early Earth and Mars, and the distribution of life beyond its planet of origin.

  3. Deimos Methane-Oxygen Rocket Engine Test Results

    NASA Astrophysics Data System (ADS)

    Engelen, S.; Souverein, L. J.; Twigt, D. J.

    This paper presents the results of the first DEIMOS Liquid Methane/Oxygen rocket engine test campaign. DEIMOS is an acronym for `Delft Experimental Methane Oxygen propulsion System'. It is a project performed by students under the auspices of DARE (Delft Aerospace Rocket Engineering). The engine provides a theoretical design thrust of 1800 N and specific impulse of 287 s at a chamber pressure of 40 bar with a total mass flow of 637 g/s. It has links to sustainable development, as the propellants used are one of the most promising so-called `green propellants'-combinations, currently under scrutiny by the industry, and the engine is designed to be reusable. This paper reports results from the provisional tests, which had the aim of verifying the engine's ability to fire, and confirming some of the design assumptions to give confidence for further engine designs. Measurements before and after the tests are used to determine first estimates on feed pressures, propellant mass flows and achieved thrust. These results were rather disappointing from a performance point of view, with an average thrust of a mere 3.8% of the design thrust, but nonetheless were very helpful. The reliability of ignition and stability of combustion are discussed as well. An initial assessment as to the reusability, the flexibility and the adaptability of the engine was made. The data provides insight into (methane/oxygen) engine designs, leading to new ideas for a subsequent design. The ultimate goal of this project is to have an operational rocket and to attempt to set an amateur altitude record.

  4. The Internationalization of Test Reviewing: Trends, Differences, and Results

    ERIC Educational Resources Information Center

    Evers, Arne

    2012-01-01

    In this article, the characteristics of five test review models are described. The five models are the US review system at the Buros Center for Testing, the German Test Review System of the Committee on Tests, the Brazilian System for the Evaluation of Psychological Tests, the European EFPA Review Model, and the Dutch COTAN Evaluation System for…

  5. XV-15 flight test results compared with design goals

    NASA Technical Reports Server (NTRS)

    Wernicke, K. G.; Magee, J. P.

    1979-01-01

    Aircraft No. 2 is presently in the midst of flight envelope expansion. Noise and safety design goals have been demonstrated; preliminary results indicate that performance and component life goals may also be met. Hovering power indicates a standard hover ceiling of 7,000 feet. After 18.0 hours of flight, a true airspeed of 207 knots has been reached. The goal is a 300-knot cruise speed. So far, XV-15 flight tests indicate no reason why the tilt rotor concept should not fulfill its promise to provide a major step forward in air vehicle flexibility and in rotary wing performance.

  6. NASA wiring for space applications program test results

    NASA Technical Reports Server (NTRS)

    Stavnes, Mark; Hammoud, Ahmad

    1995-01-01

    The electrical power wiring tests results from the NASA Wiring for Space Applications program are presented. The goal of the program was to develop a base for the building of a lightweight, arc track-resistant electrical wiring system for aerospace applications. This new wiring system would be applied to such structures as pressurized modules, trans-atmospheric vehicles, LEO/GEO environments, and lunar and Martian environments. Technological developments from this program include the fabrication of new insulating materials, the production of new wiring constructions, an improved system design, and an advanced circuit protection design.

  7. Interpretation of coagulation test results under direct oral anticoagulants.

    PubMed

    Mani, H

    2014-06-01

    Diagnostic of global coagulation parameters is part of the daily clinical routine practice in conservative as well in operative disciplines. The correct interpretation of in vitro test results in context to the ex vivo influence of anticoagulant drugs and the in vivo hemostatic system of the individual patient is dependent on the doctors clinical and laboratory experience. This article shortly reviews the laboratory interference of oral anticoagulants including the target-specific inhibitors dabigatran, rivaroxaban and apixaban on coagulation parameters and discusses the potential of several methods for measuring the anticoagulant effect of the direct oral anticoagulants.

  8. Preliminary operational results of the industrial process heat field tests

    SciTech Connect

    Kutscher, C.; Davenport, R.

    1980-04-01

    There are currently six DOE-funded solar industrial process heat (IPH) field tests which have been operational for one year or longer. These are all low temperature first generation projects which supply heat at temperatures below 100/sup 0/C - three hot water and three hot air. During the 1979 calendar year, personnel from the Solar Energy Research Institute (SERI) visited all of these sites; the performance and cost results obtained for each project and the operational problems encountered at each site are discussed.

  9. Plutonium Immobilization Program -- Cold pour Phase 1 test results

    SciTech Connect

    Hamilton, L.

    2000-01-18

    The Plutonium Immobilization Project will disposition excess weapons grade plutonium. It uses the can-in-canister approach that involves placing plutonium-ceramic pucks in sealed cans that are then placed into Defense Waste Processing Facility canisters. These canisters are subsequently filled with high-level radioactive waste glass. This process puts the plutonium in a stable form and makes it unattractive for reuse. A cold (non-radioactive) glass pour program was performed to develop and verify the baseline design for the canister and internal hardware. This paper describes the Phase 1 scoping test results.

  10. Assessing Equivalent Viscous Damping Using Piping System test Results

    SciTech Connect

    Nie, J.; Morante, R.

    2010-07-18

    The specification of damping for nuclear piping systems subject to seismic-induced motions has been the subject of many studies and much controversy. Damping estimation based on test data can be influenced by numerous factors, consequently leading to considerable scatter in damping estimates in the literature. At present, nuclear industry recommendations and nuclear regulatory guidance are not consistent on the treatment of damping for analysis of nuclear piping systems. Therefore, there is still a need to develop a more complete and consistent technical basis for specification of appropriate damping values for use in design and analysis. This paper summarizes the results of recent damping studies conducted at Brookhaven National Laboratory.

  11. JWST Near-Infrared Detectors: Latest Test Results

    NASA Technical Reports Server (NTRS)

    Smith, Erin C.; Rauscher, Bernard J.; Alexander, David; Brambora, Clifford K.; Chiao, Meng; Clemons, Brian L.; Derro, Rebecca; Engler, Chuck; Fox, Ori; Garrison, Matthew B.; Greenhouse, Matthew A.; Henegar, Greg; Hill, Robert J.; Johnson, Thomas; Lavaque, Dodolfo J.; Lindler, Don J.; Manthripragada, Sridhar S.; Marshall, Cheryl; Mott, Brent; Parr, Thomas M.; Roher, Wayne D.; Shakoorzadeh, Kamdin B.; Schnurr, Richard; Smith, Miles; Waczynski, Augustyn

    2009-01-01

    The James Webb Space Telescope, an infrared-optimized space telescope being developed by NASA for launch in 2013, will utilize cutting-edge detector technology in its investigation of fundamental questions in astrophysics. JWST's near infrared spectrograph, NIRSpec utilizes two 2048 x 2048 HdCdTe arrays with Sidecar ASIC readout electronics developed by Teledyne to provide spectral coverage from 0.6 microns to 5 microns. We present recent test and calibration results for the NIRSpec flight arrays as well as data processing routines for noise reduction and cosmic ray rejection.

  12. Hydrogen-burn survival: preliminary thermal model and test results

    SciTech Connect

    McCulloch, W.H.; Ratzel, A.C.; Kempka, S.N.; Furgal, D.T.; Aragon, J.J.

    1982-08-01

    This report documents preliminary Hydrogen Burn Survival (HBS) Program experimental and analytical work conducted through February 1982. The effects of hydrogen deflagrations on safety-related equipment in nuclear power plant containment buildings are considered. Preliminary results from hydrogen deflagration experiments in the Sandia Variable Geometry Experimental System (VGES) are presented and analytical predictions for these tests are compared and discussed. Analytical estimates of component thermal responses to hydrogen deflagrations in the upper and lower compartments of an ice condenser, pressurized water reactor are also presented.

  13. Test Results of the Luminosity Monitors for the LHC

    SciTech Connect

    Beche, J.F.; Byrd, J. M.; Doolittle, L.; Manfredi, P. F.; Matis, H. S.; Monroy, M.; Ratti, A.; Stezelberger, T.; Stiller, J.; Turner, W.; Yaver, H.; Drees, A.; Bravin, E.

    2009-05-04

    The Luminosity Monitor for the LHC has been built at LBNL and will be operational in the LHC during the upcoming run. The device, a gas ionization chamber, is installed in the high luminosity regions (those dedicated to the ATLAS and CMS experiments) and capable to resolve bunch-by-bunch luminosity as well as survive extreme levels of radiation. During the experimental R&D phase of its design, a prototype of this detector has been tested extensively at the ALS, in RHIC as well as in the SPS. Results of these experiments are presented here.

  14. Hanford coring bit temperature monitor development testing results report

    SciTech Connect

    Rey, D.

    1995-05-01

    Instrumentation which directly monitors the temperature of a coring bit used to retrieve core samples of high level nuclear waste stored in tanks at Hanford was developed at Sandia National Laboratories. Monitoring the temperature of the coring bit is desired to enhance the safety of the coring operations. A unique application of mature technologies was used to accomplish the measurement. This report documents the results of development testing performed at Sandia to assure the instrumentation will withstand the severe environments present in the waste tanks.

  15. Test results from large wing and fuselage panels

    NASA Technical Reports Server (NTRS)

    Madan, Ram C.; Voldman, Mike

    1993-01-01

    This paper presents the first results in an assessment of the strength, stiffness, and damage tolerance of stiffened wing and fuselage subcomponents. Under this NASA funded program, 10 large wing and fuselage panels, variously fabricated by automated tow placement and dry-stitched preform/resin transfer molding, are to be tested. The first test of an automated tow placement six-longeron fuselage panel under shear load was completed successfully. Using NASTRAN finite-element analysis the stiffness of the panel in the linear range prior to buckling was predicted within 3.5 percent. A nonlinear analysis predicted the buckling load within 10 percent and final failure load within 6 percent. The first test of a resin transfer molding six-stringer wing panel under compression was also completed. The panel failed unexpectedly in buckling because of inadequate supporting structure. The average strain was 0.43 percent with a line load of 20.3 kips per inch of width. This strain still exceeds the design allowable strains. Also, the stringers did not debond before failure, which is in contrast to the general behavior of unstitched panels.

  16. The X-31A quasi-tailless flight test results

    NASA Technical Reports Server (NTRS)

    Bosworth, John T.; Stoliker, P. C.

    1996-01-01

    A quasi-tailless flight investigation was launched using the X-31A enhanced fighter maneuverability airplane. In-flight simulations were used to assess the effect of partial to total vertical tail removal. The rudder control surface was used to cancel the stabilizing effects of the vertical tail, and yaw thrust vector commands were used to restabilize and control the airplane. The quasi-tailless mode was flown supersonically with gentle maneuvering and subsonically in precision approaches and ground attack profiles. Pilot ratings and a full set of flight test measurements were recorded. This report describes the results obtained and emphasizes the lessons learned from the X-31A flight test experiment. Sensor-related issues and their importance to a quasi-tailless simulation and to ultimately controlling a directionally unstable vehicle are assessed. The X-31A quasi-tailless flight test experiment showed that tailless and reduced tail fighter aircraft are definitely feasible. When the capability is designed into the airplane from the beginning, the benefits have the potential to outweigh the added complexity required.

  17. Bridge Testing With Ground-Based Interferometric Radar: Experimental Results

    SciTech Connect

    Chiara, P.; Morelli, A.

    2010-05-28

    The research of innovative non-contact techniques aimed at the vibration measurement of civil engineering structures (also for damage detection and structural health monitoring) is continuously directed to the optimization of measures and methods. Ground-Based Radar Interferometry (GBRI) represents the more recent technique available for static and dynamic control of structures and ground movements.Dynamic testing of bridges and buildings in operational conditions are currently performed: (a) to assess the conformity of the structure to the project design at the end of construction; (b) to identify the modal parameters (i.e. natural frequencies, mode shapes and damping ratios) and to check the variation of any modal parameters over the years; (c) to evaluate the amplitude of the structural response to special load conditions (i.e. strong winds, earthquakes, heavy railway or roadway loads). If such tests are carried out by using a non-contact technique (like GBRI), the classical issues of contact sensors (like accelerometers) are easily overtaken.This paper presents and discusses the results of various tests carried out on full-scale bridges by using a Stepped Frequency-Continuous Wave radar system.

  18. Relating results from earthworm toxicity tests to agricultural soil

    USGS Publications Warehouse

    Beyer, W.N.; Greig-Smith, P.W.

    1992-01-01

    The artificial soil tests of the European Economic Community and of the Organization for Economic Cooperation produce data relating earthworm mortality to pesticide concentrations in soil under laboratory conditions. To apply these results to agricultural soils it is necessary to relate these concentrations to amounts of pesticide applied per area. This paper reviews the relevant published literature and suggests a simple relation for regulatory use. Hazards to earthworms from pesticides are suggested to be greatest soon after application, when the pesticides may be concentrated in a soil layer a few millimeters thick. For estimating exposure of earthworms, however, a thicker soil layer should be considered, to account for their movement through soil. During favorable weather conditions, earthworms belonging to species appropriate to the artificial soil test have been reported to confine their activity to a layer about 5 cm. If a 5-cm layer is accepted as relevant for regulatory purposes, then an application of 1 kg/ha would be equivalent to 1-67 ppm (dry) in the artificial soil test.

  19. Space Station propulsion system test bed and control system testing results

    NASA Technical Reports Server (NTRS)

    Norman, A. M.; Briley, G. L.; Nave, L. H.; Pavlinsky, J. F.; Allums, S.

    1987-01-01

    The test bed fabricated to demonstrate hydrogen/oxygen propulsion technology readiness for the IOC Space Station application is described and test results are presented. The reliability and safety of the O2/H2 system was demonstrated with blowdowns and thruster firings. The flexibility of the system was demonstrated through the addition of an electrolysis supply module.

  20. Tc-99 Adsorption on Selected Activated Carbons - Batch Testing Results

    SciTech Connect

    Mattigod, Shas V.; Wellman, Dawn M.; Golovich, Elizabeth C.; Cordova, Elsa A.; Smith, Ronald M.

    2010-12-01

    CH2M HILL Plateau Remediation Company (CHPRC) is currently developing a 200-West Area groundwater pump-and-treat system as the remedial action selected under the Comprehensive Environmental Response, Compensation, and Liability Act Record of Decision for Operable Unit (OU) 200-ZP-1. This report documents the results of treatability tests Pacific Northwest National Laboratory researchers conducted to quantify the ability of selected activated carbon products (or carbons) to adsorb technetium-99 (Tc-99) from 200-West Area groundwater. The Tc-99 adsorption performance of seven activated carbons (J177601 Calgon Fitrasorb 400, J177606 Siemens AC1230AWC, J177609 Carbon Resources CR-1240-AW, J177611 General Carbon GC20X50, J177612 Norit GAC830, J177613 Norit GAC830, and J177617 Nucon LW1230) were evaluated using water from well 299-W19-36. Four of the best performing carbons (J177606 Siemens AC1230AWC, J177609 Carbon Resources CR-1240-AW, J177611 General Carbon GC20X50, and J177613 Norit GAC830) were selected for batch isotherm testing. The batch isotherm tests on four of the selected carbons indicated that under lower nitrate concentration conditions (382 mg/L), Kd values ranged from 6,000 to 20,000 mL/g. In comparison. Under higher nitrate (750 mg/L) conditions, there was a measureable decrease in Tc-99 adsorption with Kd values ranging from 3,000 to 7,000 mL/g. The adsorption data fit both the Langmuir and the Freundlich equations. Supplemental tests were conducted using the two carbons that demonstrated the highest adsorption capacity to resolve the issue of the best fit isotherm. These tests indicated that Langmuir isotherms provided the best fit for Tc-99 adsorption under low nitrate concentration conditions. At the design basis concentration of Tc 0.865 µg/L(14,700 pCi/L), the predicted Kd values from using Langmuir isotherm constants were 5,980 mL/g and 6,870 mL/g for for the two carbons. These Kd values did not meet the target Kd value of 9,000 mL/g. Tests

  1. Aerodynamic and Acoustic Flight Test Results and Results for the Stratospheric Observatory for Infrared Astronomy

    NASA Technical Reports Server (NTRS)

    Cumming, Stephen B.; Smith, Mark S.; Cliatt, Larry J.; Frederick, Michael A.

    2014-01-01

    As part of the Stratospheric Observatory for Infrared Astronomy program, a 747SP airplane was modified to carry a 2.5-m telescope in the aft section of the fuselage. The resulting airborne observatory allows for observations above 99 percent of the water vapor in the atmosphere. The open cavity created by the modifications had the potential to significantly affect the airplane in the areas of aerodynamics and acoustics. Several series of flight tests were conducted to clear the operating envelope of the airplane for astronomical observations, planned to be performed between the altitudes of 35,000 ft and 45,000 ft. The flight tests were successfully completed. Cavity acoustics were below design limits, and the overall acoustic characteristics of the cavity were better than expected. The modification did have some effects on the stability and control of the airplane, but these effects were not significant. Airplane air data systems were not affected by the modifications. This paper describes the methods used to examine the aerodynamics and acoustic data from the flight tests and provides a discussion of the flight-test results in the areas of cavity acoustics, stability and control, and air data.

  2. Flight Test 4 Preliminary Results: NASA Ames SSI

    NASA Technical Reports Server (NTRS)

    Isaacson, Doug; Gong, Chester; Reardon, Scott; Santiago, Confesor

    2016-01-01

    Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. The Unmanned Aircraft System (UAS) Integration into the National Airspace System (NAS) Project conducted flight test program, referred to as Flight Test 4, at Armstrong Flight Research Center from April -June 2016. Part of the test flights were dedicated to the NASA Ames-developed Detect and Avoid (DAA) System referred to as JADEM (Java Architecture for DAA Extensibility and Modeling). The encounter scenarios, which involved NASA's Ikhana UAS and a manned intruder aircraft, were designed to collect data on DAA system performance in real-world conditions and uncertainties with four different surveillance sensor systems. Flight test 4 has four objectives: (1) validate DAA requirements in stressing cases that drive MOPS requirements, including: high-speed cooperative intruder, low-speed non-cooperative intruder, high vertical closure rate encounter, and Mode CS-only intruder (i.e. without ADS-B), (2) validate TCASDAA alerting and guidance interoperability concept in the presence of realistic sensor, tracking and navigational errors and in multiple-intruder encounters against both cooperative and non-cooperative intruders, (3) validate Well Clear Recovery guidance in the presence of realistic sensor, tracking and navigational errors, and (4) validate DAA alerting and guidance requirements in the presence of realistic sensor, tracking and navigational errors. The results will be

  3. Operational Results of a Closed Brayton Cycle Test-Loop

    NASA Astrophysics Data System (ADS)

    Wright, Steven A.; Fuller, Robert; Lipinski, Ronald J.; Nichols, Kenneth; Brown, Nicholas

    2005-02-01

    A number of space and terrestrial power system designs plan to use nuclear reactors that are coupled to Closed-loop Brayton Cycle (CBC) systems to generate electrical power. Because very little experience exists regarding the operational behavior of these systems, Sandia National Laboratories (through its Laboratory Directed Research and Development program) is developing a closed-loop test bed that can be used to determine the operational behavior of these systems and to validate models for these systems. Sandia has contracted Barber-Nichols Corporation to design, fabricate, and assemble a Closed-loop Brayton Cycle (CBC) system. This system was developed by modifying commercially available hardware. It uses a 30 kWe Capstone C-30 gas-turbine unit (www.capstoneturbine.com) with a modified housing that permits the attachment of an electrical heater and a water cooled chiller that are connected to the turbo-machinery in a closed loop. The test-loop reuses the Capstone turbine, compressor, and alternator. The Capstone system's nominal operating point is 1150 K turbine inlet temperature at 96,000 rpm. The annular recuperator and portions of the Capstone control system (inverter) and starter system are also reused. The rotational speed of the turbo-machinery is controlled either by adjusting the alternator load by either using the electrical grid or a separate load bank. This report describes the test-loop hardware SBL-30 (Sandia Brayton Loop-30kWe). Also presented are results of early testing and modeling of the unit. The SBL-30 hardware is currently configured with a heater that is limited to 80 kWth with a maximum outlet temperature of ˜1000 K.

  4. [Transient abnormal Q-waves].

    PubMed

    Godballe, C; Hoeck, H C; Sørensen, J A

    1990-01-01

    We present a case of transient abnormal Q-waves (TAQ) and a review of the literature. TAQ are defined as abnormal Q-waves, which disappear within ten days. They are most often seen in patients with ischemic heart disease (IHD) but are also seen in other conditions. Brief episodes of myocardial ischemia giving rise to reversible biochemical and ultrastructural myocardial changes, resulting in transient ECG changes, provide an accepted theory for the pathogenesis of TAO. Investigations have shown that the occurrence of exercise-induced TAQ may be a symptom of IHD. It is impossible to distinguish TAQ from Q-waves induced by myocardial infarction. Appearance of TAQ during exercise-testing frequently indicates IHD. PMID:2301045

  5. Non-Nuclear Validation Test Results of a Closed Brayton Cycle Test-Loop

    NASA Astrophysics Data System (ADS)

    Wright, Steven A.

    2007-01-01

    Both NASA and DOE have programs that are investigating advanced power conversion cycles for planetary surface power on the moon or Mars, or for next generation nuclear power plants on earth. Although open Brayton cycles are in use for many applications (combined cycle power plants, aircraft engines), only a few closed Brayton cycles have been tested. Experience with closed Brayton cycles coupled to nuclear reactors is even more limited and current projections of Brayton cycle performance are based on analytic models. This report describes and compares experimental results with model predictions from a series of non-nuclear tests using a small scale closed loop Brayton cycle available at Sandia National Laboratories. A substantial amount of testing has been performed, and the information is being used to help validate models. In this report we summarize the results from three kinds of tests. These tests include: 1) test results that are useful for validating the characteristic flow curves of the turbomachinery for various gases ranging from ideal gases (Ar or Ar/He) to non-ideal gases such as CO2, 2) test results that represent shut down transients and decay heat removal capability of Brayton loops after reactor shut down, and 3) tests that map a range of operating power versus shaft speed curve and turbine inlet temperature that are useful for predicting stable operating conditions during both normal and off-normal operating behavior. These tests reveal significant interactions between the reactor and balance of plant. Specifically these results predict limited speed up behavior of the turbomachinery caused by loss of load, the conditions for stable operation, and for direct cooled reactors, the tests reveal that the coast down behavior during loss of power events can extend for hours provided the ultimate heat sink remains available.

  6. Airframe Noise Results from the QTD II Flight Test Program

    NASA Technical Reports Server (NTRS)

    Elkoby, Ronen; Brusniak, Leon; Stoker, Robert W.; Khorrami, Mehdi R.; Abeysinghe, Amal; Moe, Jefferey W.

    2007-01-01

    With continued growth in air travel, sensitivity to community noise intensifies and materializes in the form of increased monitoring, regulations, and restrictions. Accordingly, realization of quieter aircraft is imperative, albeit only achievable with reduction of both engine and airframe components of total aircraft noise. Model-scale airframe noise testing has aided in this pursuit; however, the results are somewhat limited due to lack of fidelity of model hardware, particularly in simulating full-scale landing gear. Moreover, simulation of true in-flight conditions is non-trivial if not infeasible. This paper reports on an investigation of full-scale landing gear noise measured as part of the 2005 Quiet Technology Demonstrator 2 (QTD2) flight test program. Conventional Boeing 777-300ER main landing gear were tested, along with two noise reduction concepts, namely a toboggan fairing and gear alignment with the local flow, both of which were down-selected from various other noise reduction devices evaluated in model-scale testing at Virginia Tech. The full-scale toboggan fairings were designed by Goodrich Aerostructures as add-on devices allowing for complete retraction of the main gear. The baseline-conventional gear, faired gear, and aligned gear were all evaluated with the high-lift system in the retracted position and deployed at various flap settings, all at engine idle power setting. Measurements were taken with flyover community noise microphones and a large aperture acoustic phased array, yielding far-field spectra, and localized sources (beamform maps). The results were utilized to evaluate qualitatively and quantitatively the merit of each noise reduction concept. Complete similarity between model-scale and full-scale noise reduction levels was not found and requires further investigation. Far-field spectra exhibited no noise reduction for both concepts across all angles and frequencies. Phased array beamform maps show inconclusive evidence of noise

  7. Recent flight-test results of optical airdata techniques

    NASA Technical Reports Server (NTRS)

    Bogue, Rodney K.

    1993-01-01

    Optical techniques for measuring airdata parameters were demonstrated with promising results on high performance fighter aircraft. These systems can measure the airspeed vector, and some are not as dependent on special in-flight calibration processes as current systems. Optical concepts for measuring freestream static temperature and density are feasible for in-flight applications. The best feature of these concepts is that the air data measurements are obtained nonintrusively, and for the most part well into the freestream region of the flow field about the aircraft. Current requirements for measuring air data at high angle of attack, and future need to measure the same information at hypersonic flight conditions place strains on existing techniques. Optical technology advances show outstanding potential for application in future programs and promise to make common use of optical concepts a reality. Results from several flight-test programs are summarized, and the technology advances required to make optical airdata techniques practical are identified.

  8. Portable narcotics detector and the results obtained in field tests

    NASA Astrophysics Data System (ADS)

    Tumer, Tumay O.; Su, Chih-Wu; Kaplan, Christopher R.; Rigdon, Stephen W.

    1997-02-01

    A compact integrated narcotics detection instrument (CINDI) has been developed at NOVA R&D, Inc. with funding provided by the U.S. Coast Guard. CINDI is designed as a portable sensitive neutron backscatter detector which has excellent penetration for thick and high Z compartment barriers. It also has a highly sensitive detection system for backscattered neutrons and, therefore, uses a very weak californium-252 neutron source. Neutrons backscatter profusely from materials that have a large hydrogen content, such as narcotics. The rate of backscattered neutrons detected is analyzed by a microprocessor and displayed on the control panel. The operator guides the detector along a suspected area and displays in real time the backscattered neutron rate. CINDI is capable of detecting narcotics effectively behind panels made of steel, wood, fiberglass, or even lead-lined materials. This makes it useful for inspecting marine vessels, ship bulkheads, automobiles, structure walls or small sealed containers. The strong response of CINDI to hydrogen-rich materials such as narcotics makes it an effective tool for detecting concealed drugs. Its response has been field tested by NOVA, the U.S. Coast Guard and Brewt Power Systems. The results of the tests show excellent response and specificity to narcotic drugs. Several large shipments of concealed drugs have been discovered during these trials and the results are presented and discussed.

  9. Preliminary QCGAT program test results. [Quiet, Clean General Aviation Turbofan

    NASA Technical Reports Server (NTRS)

    Koenig, R. W.; Sievers, G. K.

    1979-01-01

    The paper presents the NASA Lewis program to demonstrate that large engine technology can be applied to general aviation engines to reduce noise, emissions, and fuel consumption. After a Phase I study, two contractors, Garrett AiResearch and AVCO-Lycoming, were selected to design, manufacture, assemble, test, and deliver their Quiet, Clean, General Aviation Turbofan (QCGAT) engines to NASA. Noise, emission, and performance goals and how well they were met are discussed. Noise goals involve take off noise 3.5 n. mi. from runway threshold, sideline noise at .25 n mi. and approach noise 1 n mi. from the runway at an altitude of 370 ft. The AiResearch engines power a stretched Learjet 35 and the Lycoming a specially conceived Beech executive jet, resulting in differing power goals. Thus the thrust goal for the Lycoming was 1622 lb. while the AiResearch goal was 3937 lb. Cruise thrust goals were 485 lb. at Mach 0.6 at 25,000 ft. and 903 lb. at Mach 0.8 at 40,000 ft. respectively. The design of both engines, based on existing cores, is studied, noting such special QCGAT features as new reduction gears, combustor and power turbine. Test results are given, indicating that while the goals for noise and thrust were met those for emissions were only partially met.

  10. Direct containment heating: Surtsey test results and models

    SciTech Connect

    Tarbell, W.W.; Nichols, R.T.; Pilch, M.; Brockmann, J.E.; Powers, D.A.

    1988-08-01

    Direct containment heating is one of the processes that can lead to containment rupture early in a severe reactor accident. The origins and the current understanding of this process are surveyed. Three issues arise in connection with direct containment heating -- threats to containment integrity posed by transfer of energy to the containment atmosphere from dispersed core debris or the generation of hydrogen by reactions of core debris with steam, and the formation of radioactive aerosols available for release from the plant should containment integrity be lost. The two threats to containment integrity have different characteristics. Energy exchange between core debris and the atmosphere depends on the long range dispersal of the debris and the atmosphere depends on the long range dispersal of the debris and can be affected by interactions of the debris with structures and co-dispersed water. Hydrogen generation is dependent on the detailed flows of debris and steam within and near the reactor cavity. Results of four experiments in the Surtsey test facility to explore energy exchange with the atmosphere are presented. These experiments suggest ''single particle'' models of direct heating over-predict the threat to containment integrity and that debris/structure interactions can enhance heating of the containment atmosphere. Results of test to establish the low pressure cut-off to direct heating are reported. 23 refs., 2 figs., 1 tab.

  11. TMED-4 INTERIM REPORT PURE ZR EQUILIBRIUM TEST RESULTS

    SciTech Connect

    Korinko, P.; Morgan, G.

    2010-12-17

    Due to higher than expected permeation rates in the production of tritium in the TVA, a development and testing program was implemented to develop the understanding of why the higher rates were occurring. In addition, improved data are needed for both the design as well as the predictive models. One part of the program was to determine the equilibrium pressure of hydrogen and tritium over NPZ (1). During the course of this testing, some curious results were discovered (2) compared to the published literature data (3). Due to these apparently results, a follow-on task was undertaken to determine the equilibrium pressure of protium and deuterium over pure zirconium. A series of experiments were conducted to determine equilibrium pressures and isotherm data for the zirconium - protium and zirconium - deuterium systems. The data match the published literature data reasonably well with the plateau extending to loadings of about 1.4. There is a significant pressure rise for loadings greater than 1.7.

  12. Flight test results of the strapdown hexad inertial reference unit (SIRU). Volume 2: Test report

    NASA Technical Reports Server (NTRS)

    Hruby, R. J.; Bjorkman, W. S.

    1977-01-01

    Results of flight tests of the Strapdown Inertial Reference Unit (SIRU) navigation system are presented. The fault tolerant SIRU navigation system features a redundant inertial sensor unit and dual computers. System software provides for detection and isolation of inertial sensor failures and continued operation in the event of failures. Flight test results include assessments of the system's navigational performance and fault tolerance. Performance shortcomings are analyzed.

  13. Shake Test Results and Dynamic Calibration Efforts for the Large Rotor Test Apparatus

    NASA Technical Reports Server (NTRS)

    Russell, Carl R.

    2014-01-01

    Prior to the full-scale wind tunnel test of the UH-60A Airloads rotor, a shake test was completed on the Large Rotor Test Apparatus. The goal of the shake test was to characterize the oscillatory response of the test rig and provide a dynamic calibration of the balance to accurately measure vibratory hub loads. This paper provides a summary of the shake test results, including balance, shaft bending gauge, and accelerometer measurements. Sensitivity to hub mass and angle of attack were investigated during the shake test. Hub mass was found to have an important impact on the vibratory forces and moments measured at the balance, especially near the UH-60A 4/rev frequency. Comparisons were made between the accelerometer data and an existing finite-element model, showing agreement on mode shapes, but not on natural frequencies. Finally, the results of a simple dynamic calibration are presented, showing the effects of changes in hub mass. The results show that the shake test data can be used to correct in-plane loads measurements up to 10 Hz and normal loads up to 30 Hz.

  14. D-0 North End Cap Calorimeter Cold Test Results

    SciTech Connect

    Michael, J.; /Fermilab

    1990-08-02

    The North endcap calorimeter vessel was recieved on July 1, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on July 10-11 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed on the Central Calorimeter in October of 1987. Reference D-Zero engineering notes 3740.210-EN-122, 3740.000-EN107, and 3740.210-EN-110 for information about the CC cold test. The insulating vacuum space was pumped on while equipment was being connected to the pressure vessel. Two hours after starting to pump with the blower the vacuum space pressure was at about 210 microns. Pumping on the vacuum space for the next 15 hours showed no progress and a leak detector was connected to the pumping line. A leak check showed a leak in a thermocouple feedthru on the vacuum space relief plate. After fixing the leak, the pressure dropped to 16 microns in less than one hour. A rate of rise test was performed starting at a pressure of 13 microns. The pressure rose to 39 microns within 8 minutes and then only rose to 43 microns in 2.5 hours (1.6 microns/hour). After all connections were made to the pressure vessel, a vacuum pump with an estimated effective pumping speed of about 70 scfm was valved on. The lowest pressure achieved after 2 days of pumping was 80 microns. Valving out the pump for 30 minutes resulted in a 5 micron per minute rate of rise. The rate of rise was considered acceptable since there were known leak paths through the bolts of the signal ports. The EC North vessel was rolled outside of Lab A in preparation for a 5000 gallon liquid nitrogen trailer which arrived July, 10 at 8:00am. Before filling the vessel, the vacuum space pump was valved off. The pressure in the

  15. Aeronautical satellite data link concept, design, and flight test results

    NASA Astrophysics Data System (ADS)

    Anderson, Samuel S.; Hogle, Lawrence H.; Breitwisch, Ronald; Edwards, C. P.; Hamilton, Robert J.; Lipke, David W.

    important operational ASDL system design topics; 2) a detailed description of the developed ASDL design; and 3) a description of the test program and a preliminary summary of the results.

  16. Mutagenicity in drug development: interpretation and significance of test results.

    PubMed

    Clive, D

    1985-03-01

    The use of mutagenicity data has been proposed and widely accepted as a relatively fast and inexpensive means of predicting long-term risk to man (i.e., cancer in somatic cells, heritable mutations in germ cells). This view is based on the universal nature of the genetic material, the somatic mutation model of carcinogenesis, and a number of studies showing correlations between mutagenicity and carcinogenicity. An uncritical acceptance of this approach by some regulatory and industrial concerns is over-conservative, naive, and scientifically unjustifiable on a number of grounds: Human cancers are largely life-style related (e.g., cigarettes, diet, tanning). Mutagens (both natural and man-made) are far more prevalent in the environment than was originally assumed (e.g., the natural bases and nucleosides, protein pyrolysates, fluorescent lights, typewriter ribbon, red wine, diesel fuel exhausts, viruses, our own leukocytes). "False-positive" (relative to carcinogenicity) and "false-negative" mutagenicity results occur, often with rational explanations (e.g., high threshold, inappropriate metabolism, inadequate genetic endpoint), and thereby confound any straightforward interpretation of mutagenicity test results. Test battery composition affects both the proper identification of mutagens and, in many instances, the ability to make preliminary risk assessments. In vitro mutagenicity assays ignore whole animal protective mechanisms, may provide unphysiological metabolism, and may be either too sensitive (e.g., testing at orders-of-magnitude higher doses than can be ingested) or not sensitive enough (e.g., short-term treatments inadequately model chronic exposure in bioassay). Bacterial systems, particularly the Ames assay, cannot in principle detect chromosomal events which are involved in both carcinogenesis and germ line mutations in man. Some compounds induce only chromosomal events and little or no detectable single-gene events (e.g., acyclovir, caffeine

  17. Test result communication in primary care: a survey of current practice

    PubMed Central

    Litchfield, Ian; Bentham, Louise; Lilford, Richard; McManus, Richard J; Hill, Ann; Greenfield, Sheila

    2015-01-01

    Background The number of blood tests ordered in primary care continues to increase and the timely and appropriate communication of results remains essential. However, the testing and result communication process includes a number of participants in a variety of settings and is both complicated to manage and vulnerable to human error. In the UK, guidelines for the process are absent and research in this area is surprisingly scarce; so before we can begin to address potential areas of weakness there is a need to more precisely understand the strengths and weaknesses of current systems used by general practices and testing facilities. Methods We conducted a telephone survey of practices across England to determine the methods of managing the testing and result communication process. In order to gain insight into the perspectives from staff at a large hospital laboratory we conducted paired interviews with senior managers, which we used to inform a service blueprint demonstrating the interaction between practices and laboratories and identifying potential sources of delay and failure. Results Staff at 80% of practices reported that the default method for communicating normal results required patients to telephone the practice and 40% of practices required that patients also call for abnormal results. Over 80% had no fail-safe system for ensuring that results had been returned to the practice from laboratories; practices would otherwise only be aware that results were missing or delayed when patients requested results. Persistent sources of missing results were identified by laboratory staff and included sample handling, misidentification of samples and the inefficient system for collating and resending misdirected results. Conclusions The success of the current system relies on patients both to retrieve results and in so doing alert staff to missing and delayed results. Practices appear slow to adopt available technological solutions despite their potential for

  18. PROTEC TM TEAR-OFFS: RESULTS OF LONG TERM TESTING

    SciTech Connect

    Peeler, D

    2008-07-24

    The Savannah River National Laboratory (SRNL) has completed a series of tests (Phases 1 and 2) to assess the potential use of a Mylar{reg_sign} tear-off system as a primary or secondary protective barrier to minimize acid etching ('frosting'), accidental scratching, and/or radiation damage for shielded cells, glovebox, and/or chemical hood windows. Conceptually, thin, multi-layered sheets of Mylar (referred to throughout this report as the ProTec{trademark} tear-off system) can be directly applied to the shielded cell, glovebox, or hood sash window to serve as a secondary (or primary) barrier. Upon degradation of visual clarity due to accidental scratching, spills/splatters, and/or radiation damage, the outer layer (or sheet) of Mylar could be removed refreshing or restoring the view. Due to the multilayer aspect, the remaining Mylar layers would provide continued protection for the window from potential reoccurrences. Although the concept of using a tear-off system as a protective barrier is conceptually enticing, potential technical issues were identified and addressed as part of this phased study to support implementation of this type of system in the Defense Waste Processing Facility (DWPF). Specific test conditions of interest to the DWPF included the performance of the tear-off system exposed to or under the following conditions: (1) acid(s) (concentrated (28.9 M) HF, concentrated (15.9M) HNO{sub 3}, 6M HCl, and 0.6M H{sub 3}BO{sub 3}); (2) base (based on handling of radioactive sludges with pH of {approx}12-13); (3) gamma radiation (due to radioactive sources or materials being used in the analytical cells); (4) scratch resistance (simulating accidental scratching with the manipulators); and (5) in-situ testing (sample coupons exposed to actual field conditions in DWPF). The results of the Phase 1 study indicated that the ProTec tear-off concept (as a primary or secondary protective barrier) is a potential technical solution to prevent or retard excessive

  19. Influence of Blood Lipids on Global Coagulation Test Results

    PubMed Central

    Kim, Jung-Ah; Kim, Ji-Eun; Song, Sang Hoon

    2015-01-01

    Background High levels of blood lipids have been associated with high levels of coagulation factors. We investigated whether blood lipids influence the results of global coagulation tests, including prothrombin time (PT), activated partial thromboplastin time (aPTT), and thrombin generation assay (TGA). Methods PT, aPTT, and TGA, along with procoagulant and anticoagulant factors, were measured in 488 normal individuals. Vitamin K status was assessed with prothrombin-induced by vitamin K absence-II (PIVKA-II). Results The procoagulant factors II, VII, IX, X, and XI and anticoagulant factors protein C and protein S showed significant correlations with triglyceride, and the procoagulant factors II, V, VII, IX, X, XI, and XII and anticoagulant factors antithrombin and protein C correlated with total cholesterol. There were no correlations of blood lipid levels with PIVKA-II levels. Subjects with high triglyceride levels (≥200 mg/dL) showed shorter PT values than those with lower triglyceride levels. However, aPTT value was not changed in terms of blood lipid levels. In both 1 and 5 pM tissue factor-induced TGAs, subjects in the high-triglyceride or high-cholesterol groups (≥240 mg/dL) had high levels of lag time, time-to-peak, and endogenous thrombin potential. Total cholesterol was a significant determinant of PT and TGA values. Conclusion High blood lipids were related with increased coagulation activity in a normal population. Our findings are expected to help interpret the global coagulation test results in individuals with high lipid levels. PMID:25553275

  20. [Results of Training for Personnel Involved in Blood-Transfusion Testing Outside of Regular Work Hours at Saga University Hospital].

    PubMed

    Yamada, Marie; Yamada, Naotomo; Higashitani, Takanori; Ohta, Shoichiro; Sueoka, Eisaburo

    2015-11-01

    Laboratory testing prior to blood transfusion outside of regular hours in many hospitals and clinics is frequently conducted by technicians without sufficient experience in such testing work. To obtain consistent test results regardless of the degree of laboratory experience with blood transfusion testing, the number of facilities introducing automated equipment for testing prior to blood transfusion is increasing. Our hospital's blood transfusion department introduced fully automated test equipment in October of 2010 for use when blood transfusions are conducted outside of regular hours. However, excessive dependence on automated testing can lead to an inability to do manual blood typing or cross-match testing when necessitated by breakdowns in the automated test equipment, in the case of abnormal specimen reactions, or other such case. In addition, even outside of normal working hours there are more than a few instances in which transfusion must take place based on urgent communications from clinical staff, with the need for prompt and flexible timing of blood transfusion test and delivery of blood products. To address this situation, in 2010 we began training after-hours laboratory personnel in blood transfusion testing to provide practice using test tubes manually and to achieve greater understanding of blood transfusion test work (especially in cases of critical blood loss). Results of the training and difficulties in its implementation for such after-hours laboratory personnel at our hospital are presented and discussed in this paper. [Original

  1. Surrogate/spent fuel sabotage : aerosol ratio test program and Phase 2 test results.

    SciTech Connect

    Borek, Theodore Thaddeus III; Thompson, N. Slater; Sorenson, Ken Bryce; Hibbs, R.S.; Nolte, Oliver; Molecke, Martin Alan; Autrusson, Bruno; Young, F. I.; Koch, Wolfgang; Brochard, Didier; Pretzsch, Gunter Guido; Lange, Florentin

    2004-05-01

    A multinational test program is in progress to quantify the aerosol particulates produced when a high energy density device, HEDD, impacts surrogate material and actual spent fuel test rodlets. This program provides needed data that are relevant to some sabotage scenarios in relation to spent fuel transport and storage casks, and associated risk assessments; the program also provides significant political benefits in international cooperation. We are quantifying the spent fuel ratio, SFR, the ratio of the aerosol particles released from HEDD-impacted actual spent fuel to the aerosol particles produced from surrogate materials, measured under closely matched test conditions. In addition, we are measuring the amounts, nuclide content, size distribution of the released aerosol materials, and enhanced sorption of volatile fission product nuclides onto specific aerosol particle size fractions. These data are crucial for predicting radiological impacts. This document includes a thorough description of the test program, including the current, detailed test plan, concept and design, plus a description of all test components, and requirements for future components and related nuclear facility needs. It also serves as a program status report as of the end of FY 2003. All available test results, observations, and analyses - primarily for surrogate material Phase 2 tests using cerium oxide sintered ceramic pellets are included. This spent fuel sabotage - aerosol test program is coordinated with the international Working Group for Sabotage Concerns of Transport and Storage Casks, WGSTSC, and supported by both the U.S. Department of Energy and Nuclear Regulatory Commission.

  2. First Measurements and Results With a Stretched Wire Test Setup

    SciTech Connect

    Peters, Franz

    2010-12-13

    The LINAC Coherent Light Source [LCLS] is a free electron laser, designed to produce high brilliant X-ray beams using Self Amplified Spontaneous Emission [SASE]. Due to the physics of SASE, the electron beam has to be held very precisely on the same trajectory as the X-ray light beam generated by the undulator magnets. To optimize the SASE output, trajectory deviations between both beams have to be minimized to a few micrometers along the entire undulator section and held stable over the time period between beam-based-alignment processes. Consequently, extremely high position stability of all magnets in the undulator section is required to operate the LCLS successfully. The knowledge of any magnet movement exceeding few micrometers during periods of several weeks is essential for efficient X-ray generation. A well known principle of monitoring transverse component positions along beam lines is the application of stretched wires, associated with suitable wire position sensors and electronics. The particular challenge at LCLS is the required wire system performance in conjunction with the length of the undulator section and the large number of monitors. Verification of system stability and resolution under real conditions is the primary goal of this test setup. A stretched wire test setup has been implemented to gain experience for the final design of a wire system, which will meet the position monitoring requirements in the LCLS undulator section. The report briefly introduces the system's architecture and describes first measurements and results.

  3. Experimental results of the European HELINOISE aeroacoustic rotor test

    NASA Astrophysics Data System (ADS)

    Splettstoesser, W. R.; Niesl, G.; Cenedese, F.; Nitti, F.; Papanikas, D. G.

    1995-04-01

    In a cooperative research program between eight European partners, a 40% geometrically and dynamically scaled and highly instrumented model of the ECD (formerly MBB) BO 105 helicopter main rotor was tested in the open-jet anechoic test section of the German-Dutch Wind Tunnel (DNW) in the Netherlands. The primary objectives of this experimental study were to: (1) to improve the physical unsderstanding of the impulsive rotor noise sources by correlating blade pressure and acoustic character- istics, and (2) to provide an extensive airload and acoustic database for code validation purposes. Consequently, a compressive set of simultaneous acoustic and aerodynamic blade surface pressure data as well as blade dynamic and performance data were measured for the standard rotor with rectangular blade tips. In addition, initial quantitative information of the blade-vortex miss distance during blade-vortex interaction (BVI) was obtained. This paper describes the model and summarizes the aeroacoustic key results. The blade pressure chracteristics are examined to identify with the corresponding characteristics of the radiated sound pressure fields provide improved insight into the physics of the impulsive noise mechanisms. For descent flight, the strong change of BVI noise directivity and level with descent condition is illustrated, and the importance of the blade-vortex miss distance shown.

  4. Ground Operations Demonstration Unit for Liquid Hydrogen Initial Test Results

    NASA Technical Reports Server (NTRS)

    Notardonato, W. U.; Johnson, W. L.; Swanger, A. M.; Tomsik, T.

    2015-01-01

    NASA operations for handling cryogens in ground support equipment have not changed substantially in 50 years, despite major technology advances in the field of cryogenics. NASA loses approximately 50% of the hydrogen purchased because of a continuous heat leak into ground and flight vessels, transient chill down of warm cryogenic equipment, liquid bleeds, and vent losses. NASA Kennedy Space Center (KSC) needs to develop energy-efficient cryogenic ground systems to minimize propellant losses, simplify operations, and reduce cost associated with hydrogen usage. The GODU LH2 project has designed, assembled, and started testing of a prototype storage and distribution system for liquid hydrogen that represents an advanced end-to-end cryogenic propellant system for a ground launch complex. The project has multiple objectives including zero loss storage and transfer, liquefaction of gaseous hydrogen, and densification of liquid hydrogen. The system is unique because it uses an integrated refrigeration and storage system (IRAS) to control the state of the fluid. This paper will present and discuss the results of the initial phase of testing of the GODU LH2 system.

  5. Ground operations demonstration unit for liquid hydrogen initial test results

    NASA Astrophysics Data System (ADS)

    Notardonato, W. U.; Johnson, W. L.; Swanger, A. M.; Tomsik, T.

    2015-12-01

    NASA operations for handling cryogens in ground support equipment have not changed substantially in 50 years, despite major technology advances in the field of cryogenics. NASA loses approximately 50% of the hydrogen purchased because of a continuous heat leak into ground and flight vessels, transient chill down of warm cryogenic equipment, liquid bleeds, and vent losses. NASA Kennedy Space Center (KSC) needs to develop energy-efficient cryogenic ground systems to minimize propellant losses, simplify operations, and reduce cost associated with hydrogen usage. The GODU LH2 project has designed, assembled, and started testing of a prototype storage and distribution system for liquid hydrogen that represents an advanced end-to-end cryogenic propellant system for a ground launch complex. The project has multiple objectives including zero loss storage and transfer, liquefaction of gaseous hydrogen, and densification of liquid hydrogen. The system is unique because it uses an integrated refrigeration and storage system (IRAS) to control the state of the fluid. This paper will present and discuss the results of the initial phase of testing of the GODU LH2 system.

  6. Synthetic vision system flight test results and lessons learned

    NASA Technical Reports Server (NTRS)

    Radke, Jeffrey

    1993-01-01

    Honeywell Systems and Research Center developed and demonstrated an active 35 GHz Radar Imaging system as part of the FAA/USAF/Industry sponsored Synthetic Vision System Technology Demonstration (SVSTD) Program. The objectives of this presentation are to provide a general overview of flight test results, a system level perspective that encompasses the efforts of the SVSTD and Augmented VIsual Display (AVID) programs, and more importantly, provide the AVID workshop participants with Honeywell's perspective on the lessons that were learned from the SVS flight tests. One objective of the SVSTD program was to explore several known system issues concerning radar imaging technology. The program ultimately resolved some of these issues, left others open, and in fact created several new concerns. In some instances, the interested community has drawn improper conclusions from the program by globally attributing implementation specific issues to radar imaging technology in general. The motivation for this presentation is therefore to provide AVID researchers with a better understanding of the issues that truly remain open, and to identify the perceived issues that are either resolved or were specific to Honeywell's implementation.

  7. Results and Analysis from Space Suit Joint Torque Testing

    NASA Technical Reports Server (NTRS)

    Matty, Jennifer

    2010-01-01

    A space suit's mobility is critical to an astronaut's ability to perform work efficiently. As mobility increases, the astronaut can perform tasks for longer durations with less fatigue. Mobility can be broken down into two parts: range of motion (ROM) and torque. These two measurements describe how the suit moves and how much force it takes to move. Two methods were chosen to define mobility requirements for the Constellation Space Suit Element (CSSE). One method focuses on range of motion and the second method centers on joint torque. A joint torque test was conducted to determine a baseline for current advanced space suit joint torques. This test utilized the following space suits: Extravehicular Mobility Unit (EMU), Advanced Crew Escape Suit (ACES), I-Suit, D-Suit, Enhanced Mobility (EM)- ACES, and Mark III (MK-III). Data was collected data from 16 different joint movements of each suit. The results were then reviewed and CSSE joint torque requirement values were selected. The focus of this paper is to discuss trends observed during data analysis.

  8. In-flight and laboratory vacuum-friction test results

    NASA Technical Reports Server (NTRS)

    Devine, E. J.; Evans, H. E.; Leasure, W. A.

    1973-01-01

    Coefficient of friction measurements were made for six unlubricated metal couples exposed to the space environment aboard the OV-1-13 spacecraft and exposed to laboratory vacuum. Materials studied included mutually soluble, partially soluble, and insoluble metal combinations. Two samples of each material couple were tested in space and in the laboratory using the disk and rider technique. Linear velocity was 0.10 cm/s (2.5 in/min) and rider normal load was 4.45 N (1 lb) for the gold versus silver couples and 8.90 N (2lb) for the other combinations. Results showed that friction data obtained in a clean ion-pumped laboratory vacuum of 10 to the minus 10 power materials with low mutual solubility can be correlated to operation in the vicinity of a typical scientific spacecraft that is exposed to an ambient pressure as low as 10 to the minus 12 power torr. The expected increase in coefficient of friction with solubility was shown. Material couples with high mutual solubility present the hazard of unpredictable drastic friction increase in orbit which may not be evident in laboratory testing at levels down to 10 to the minus 10 power torr. It was also shown that gross cold welding of unlubricated metals exposed to a satellite environment does not occur.

  9. 2011 Hyundai Sonata 3539 - Hybrid Electric Vehicle Battery Test Results

    SciTech Connect

    Matthew Shirk; Tyler Gray; Jeffrey Wishart

    2014-09-01

    The U.S. Department of Energy’s Advanced Vehicle Testing Activity Program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on hybrid electric vehicles, including testing hybrid electric vehicle batteries when both the vehicles and batteries are new and at the conclusion of 160,000 miles of on-road fleet testing. This report documents battery testing performed for the 2011 Hyundai Sonata Hybrid (VIN KMHEC4A47BA003539). Battery testing was performed by Intertek Testing Services NA. The Idaho National Laboratory and Intertek collaborate on the Advanced Vehicle Testing Activity for the Vehicle Technologies Program of the U.S. Department of Energy.

  10. Computational Modeling of NEXT 2000-Hour Wear Test Results

    NASA Technical Reports Server (NTRS)

    Malone, Shane P.

    2004-01-01

    Ion optics computational models are invaluable tools for the design of ion optics systems. In this study, a new computational model developed by an outside vendor for NASA Glenn Research Center (GRC) is presented. This model is a gun code which has been modified to model the plasma sheaths both upstream and downstream of the ion optics. The model handles multiple species (e.g. singly and doubly-charged ions) and includes a charge-exchange model for erosion estimates. The model uses commercially available solid design and meshing software, allowing high flexibility in ion optics geometric configurations. This computational model is compared to experimental results from the NASA Evolutionary Xenon Thruster (NEXT) 2000-hour wear test, including over-focusing along the edge apertures, pit-and-groove erosion due to charge exchange, and beamlet distortion at the edge of the hole pattern.

  11. Performance and test results of a regulated magnetron pulser

    SciTech Connect

    Rose, C.R.; Warren, D.S.

    1998-12-31

    This paper describes the test results and performance of a 5.0-kV, 750-mA, regulated current pulser used to drive an Hitachi model 2M130 2,425-MHz magnetron. The magnetron is used to modulate the plasma in a particle accelerator injector. In this application, precise and stable rf power is crucial to extract a stable and accurate particle beam. A 10-kV high-voltage triode vacuum tube with active feedback is used to control the magnetron current and output rf power. The pulse width may be varied from as little as ten microseconds to continuous duty by varying the width of a supplied gate pulse. The output current level can be programmed between 10 and 750 mA. Current regulation and accuracy are better than 1%. The paper discusses the overall performance of the pulser and magnetron including anode current and rf power waveforms, linearity compliance, and vacuum tube performance.

  12. GPS interferometric attitude and heading determination: Initial flight test results

    NASA Technical Reports Server (NTRS)

    Vangraas, Frank; Braasch, Michael

    1991-01-01

    Attitude and heading determination using GPS interferometry is a well-understood concept. However, efforts have been concentrated mainly in the development of robust algorithms and applications for low dynamic, rigid platforms (e.g., shipboard). This paper presents results of what is believed by the authors to be the first realtime flight test of a GPS attitude and heading determination system. The system is installed in Ohio University's Douglas DC-3 research aircraft. Signals from four antennas are processed by an Ashtech 3DF 24-channel GPS receiver. Data from the receiver are sent to a microcomputer for storage and further computations. Attitude and heading data are sent to a second computer for display on a software generated artificial horizon. Demonstration of this technique proves its candidacy for augmentation of aircraft state estimation for flight control and navigation as well as for numerous other applications.

  13. Preliminary Test Results for the MICE Spectrometer Superconducting Solenoids

    SciTech Connect

    Virostek, Steve P.; Green, Michael A; Li, Derun; Zisman, Michael S.; Wang, S.T.; Wahrer, R.; Taylor, Clyde; Lu, X.; Chen, J. Y.; Wang, Mimi; Juang, Tiki

    2008-08-02

    This report describes the MICE spectrometer solenoids as built. Each magnet consists of five superconducting coils. Two coils are used to tune the beam going from or to the MICE spectrometer from the rest of the MICE cooling channel. Three spectrometer coils (two end coils and a long center coil) are used to create a uniform 4 T field (to {+-}0.3 percent) over a length of 1.0 m within a diameter of 0.3 m. The three-coil spectrometer set is connected in series. The two end coils use small power supplies to tune the uniform field region where the scintillating fiber tracker is located. This paper will present the results of the preliminary testing of the first spectrometer solenoid.

  14. First results of the ISIS1 beam test

    NASA Astrophysics Data System (ADS)

    Velthuis, J. J.; Cussans, D.; Goldstein, J.; Mandry, S.; Stefanov, K. D.; Zhang, Z.; Banda, Y.; Cheplakov, A.; Damerell, C. J. S.; Devetak, E.; Fopma, J.; Gao, R.; Greenshaw, T.; Grimes, M.; Heath, H.; Hillert, S.; Johnson, E. L.; Laing, A.; Lynch, C.; Martin, V. J.; Murray, P.; Nomerotski, A.; Thomas, S. L.; Walsh, R.; Woolliscroft, T.; Worm, S.

    2009-02-01

    The in situ storage image sensor (ISIS) is a monolithic active pixel sensor with memory cells in each pixel. The memory cells are implemented as a CCD register. This and other features of the sensor make the ISIS an excellent device for detectors that will be used at the International linear collider (ILC), an electron-positron accelerator with a proposed centre-of-mass energy of around 500 GeV. The sensor can be made very thin while retaining a high signal-to-noise ratio. The memory cells can be read out between bunch trains at a relatively low clock speed, hence limiting power consumption. The actual signal charge is stored in potential wells and not on capacitors, minimizing the sensitivity to electromagnetic interference. This paper presents the results of the first beam test of the first ISIS prototype. The measurements made include the signal-to-noise ratio, position resolution and efficiency.

  15. Scale model test results of several STOVL ventral nozzle concepts

    NASA Technical Reports Server (NTRS)

    Meyer, B. E.; Re, R. J.; Yetter, J. A.

    1991-01-01

    Short take-off and vertical landing (STOVL) ventral nozzle concepts are investigated by means of a static cold flow scale model at a NASA facility. The internal aerodynamic performance characteristics of the cruise, transition, and vertical lift modes are considered for four ventral nozzle types. The nozzle configurations examined include those with: butterfly-type inner doors and vectoring exit vanes; circumferential inner doors and thrust vectoring vanes; a three-port segmented version with circumferential inner doors; and a two-port segmented version with cylindrical nozzle exit shells. During the testing, internal and external pressure is measured, and the thrust and flow coefficients and resultant vector angles are obtained. The inner door used for ventral nozzle flow control is found to affect performance negatively during the initial phase of transition. The best thrust performance is demonstrated by the two-port segmented ventral nozzle due to the elimination of the inner door.

  16. Computational Modeling of NEXT 2000-hour Wear Test Results

    NASA Astrophysics Data System (ADS)

    Malone, Shane; Soulas, George

    2004-11-01

    Ion optics computational models are invaluable tools for the design of ion optics systems. In this study, a new computational model developed by an outside vendor for NASA Glenn Research Center (GRC) is presented. This model is a gun code which has been modified to model the plasma sheaths both upstream and downstream of the ion optics. The model handles multiple species (e.g. singly and doubly-charged ions) and includes a charge-exchange model for erosion estimates. The model uses commercially available solid design and meshing software, allowing high flexibility in ion optics geometric configurations. This computational model is compared to experimental results from the NASA Evolutionary Xenon Thruster (NEXT) 2000-hour wear test, including over-focusing along the edge apertures, pit-and-groove erosion due to charge exchange, and beamlet distortion at the edge of the hole pattern.

  17. Np Behavior in Synthesized Uranyl Phases: Results of Initial Tests

    SciTech Connect

    Friese, Judah I.; Douglas, Matthew; McNamara, Bruce K.; Clark, Sue B.; Hanson, Brady D.

    2004-09-28

    Initial tests were completed at Pacific Northwest National Laboratory for developing a potential mechanism to retard the mobility of neptunium at the Yucca Mountain repository. Neptunium is of concern because of its mobility in the environment and long half life, contributing a large percentage of the potential dose over extended times at the perimeter of the site. The mobility of neptunium could be retarded by associating with uranium mineral phases. The following four uranium mineral phases were examined and are potential secondary phases expected to form as a result of interactions of spent nuclear fuel with the local environment: meta-schoepite, studtite, uranophane, and sodium boltwoodite. The fate of the neptunium was examined in these synthetic experiments.

  18. Test results of an active magnetic regenerative refrigerator

    NASA Astrophysics Data System (ADS)

    Degregoria, A. J.; Feuling, L. J.; Laatsch, J. F.; Rowe, J. R.; Trueblood, J. R.; Wang, A. A.

    The principle of the Active Magnetic Regenerator (AMR) is tested with an experimental refrigerator designed to operate within the temperature range of about 4 to 80 K. Applications, including helium and hydrogen liquefaction and hydrogen slush generation, are envisioned. The device uses a single moveable superconducting solenoidal magnet in persistent mode to alternately charge and discharge two in-line beds of magnetic material. Between magnet motions, a double-acting piston displacer moves heat transfer fluid in the form of helium gas through the beds, absorbing heat at the cold heat exchanger and rejecting heat at the hot heat exchanger. A description of the refrigerator and performance results are presented. Comparisons to a detailed AMR model are shown.

  19. LISA PathFinder radiation monitor proton irradiation test results

    NASA Astrophysics Data System (ADS)

    Mateos, I.; Diaz-Aguiló, M.; Gibert, F.; Grimani, C.; Hollington, D.; Lloro, I.; Lobo, A.; Nofrarias, M.; Ramos-Castro, J.

    2012-06-01

    The design of the Radiation Monitor in the LISA Technology Package on board LISA Pathnder is based on two silicon PIN diodes, placed parallel to each other in a telescopic configuration. One of them is able to record spectral information of the particle hitting the diode. A test campaign for the flight model Radiation Monitor was done in the Paul Scherrer Institute Proton Irradiation Facility in September 2010. Its purpose was to check correct functionality of the Radiation Monitor under real high energy proton fluxes. Here we present the results of the experiments done and their assessment by means of a simulated flight model geometry using GEANT4 toolkit. No deviation from nominal RM performance was detected, which means the instrument is fully ready for flight.

  20. Enhanced vision systems: results of simulation and operational tests

    NASA Astrophysics Data System (ADS)

    Hecker, Peter; Doehler, Hans-Ullrich

    1998-07-01

    Today's aircrews have to handle more and more complex situations. Most critical tasks in the field of civil aviation are landing approaches and taxiing. Especially under bad weather conditions the crew has to handle a tremendous workload. Therefore DLR's Institute of Flight Guidance has developed a concept for an enhanced vision system (EVS), which increases performance and safety of the aircrew and provides comprehensive situational awareness. In previous contributions some elements of this concept have been presented, i.e. the 'Simulation of Imaging Radar for Obstacle Detection and Enhanced Vision' by Doehler and Bollmeyer 1996. Now the presented paper gives an overview about the DLR's enhanced vision concept and research approach, which consists of two main components: simulation and experimental evaluation. In a first step the simulational environment for enhanced vision research with a pilot-in-the-loop is introduced. An existing fixed base flight simulator is supplemented by real-time simulations of imaging sensors, i.e. imaging radar and infrared. By applying methods of data fusion an enhanced vision display is generated combining different levels of information, such as terrain model data, processed images acquired by sensors, aircraft state vectors and data transmitted via datalink. The second part of this contribution presents some experimental results. In cooperation with Daimler Benz Aerospace Sensorsystems Ulm, a test van and a test aircraft were equipped with a prototype of an imaging millimeter wave radar. This sophisticated HiVision Radar is up to now one of the most promising sensors for all weather operations. Images acquired by this sensor are shown as well as results of data fusion processes based on digital terrain models. The contribution is concluded by a short video presentation.